Merge tag 'omap-for-v4.19/fixes-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
Fixes for omap variants against v4.19-rc1
These are mostly fixes related to using ti-sysc interconnect target module
driver for accessing right register offsets for sgx and cpsw and for
no_console_suspend regression.
There is also a droid4 emmc fix where emmc may not get detected for some
models, and vibrator dts mismerge fix.
And we have a file permission fix for am335x-osd3358-sm-red.dts that
just got added. And we must tag RTC as system-power-controller for
am437x for PMIC to shut down during poweroff.
* tag 'omap-for-v4.19/fixes-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: omap4-droid4: Fix emmc errors seen on some devices
ARM: dts: Fix file permission for am335x-osd3358-sm-red.dts
arm: dts: am4372: setup rtc as system-power-controller
ARM: dts: omap4-droid4: fix vibrations on Droid 4
bus: ti-sysc: Fix no_console_suspend handling
bus: ti-sysc: Fix module register ioremap for larger offsets
ARM: OMAP2+: Fix module address for modules using mpu_rt_idx
ARM: OMAP2+: Fix null hwmod for ti-sysc debug
Signed-off-by: Olof Johansson <olof@lixom.net>
diff --git a/arch/arm/boot/dts/imx23-evk.dts b/arch/arm/boot/dts/imx23-evk.dts
index 9fb4772..ad2ae25 100644
--- a/arch/arm/boot/dts/imx23-evk.dts
+++ b/arch/arm/boot/dts/imx23-evk.dts
@@ -13,6 +13,43 @@
reg = <0x40000000 0x08000000>;
};
+ reg_vddio_sd0: regulator-vddio-sd0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vddio-sd0";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio1 29 0>;
+ };
+
+ reg_lcd_3v3: regulator-lcd-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "lcd-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio1 18 0>;
+ enable-active-high;
+ };
+
+ reg_lcd_5v: regulator-lcd-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "lcd-5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ panel {
+ compatible = "sii,43wvf1g";
+ backlight = <&backlight_display>;
+ dvdd-supply = <®_lcd_3v3>;
+ avdd-supply = <®_lcd_5v>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&display_out>;
+ };
+ };
+ };
+
apb@80000000 {
apbh@80000000 {
gpmi-nand@8000c000 {
@@ -52,31 +89,11 @@
lcdif@80030000 {
pinctrl-names = "default";
pinctrl-0 = <&lcdif_24bit_pins_a>;
- lcd-supply = <®_lcd_3v3>;
- display = <&display0>;
status = "okay";
- display0: display0 {
- bits-per-pixel = <32>;
- bus-width = <24>;
-
- display-timings {
- native-mode = <&timing0>;
- timing0: timing0 {
- clock-frequency = <9200000>;
- hactive = <480>;
- vactive = <272>;
- hback-porch = <15>;
- hfront-porch = <8>;
- vback-porch = <12>;
- vfront-porch = <4>;
- hsync-len = <1>;
- vsync-len = <1>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
+ port {
+ display_out: endpoint {
+ remote-endpoint = <&panel_in>;
};
};
};
@@ -118,32 +135,7 @@
};
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- reg_vddio_sd0: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "vddio-sd0";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&gpio1 29 0>;
- };
-
- reg_lcd_3v3: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "lcd-3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&gpio1 18 0>;
- enable-active-high;
- };
- };
-
- backlight {
+ backlight_display: backlight {
compatible = "pwm-backlight";
pwms = <&pwm 2 5000000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts
index 6b0ae66..93ab5bd 100644
--- a/arch/arm/boot/dts/imx28-evk.dts
+++ b/arch/arm/boot/dts/imx28-evk.dts
@@ -13,6 +13,87 @@
reg = <0x40000000 0x08000000>;
};
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_vddio_sd0: regulator-vddio-sd0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vddio-sd0";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio3 28 0>;
+ };
+
+ reg_fec_3v3: regulator-fec-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "fec-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 15 0>;
+ };
+
+ reg_usb0_vbus: regulator-usb0-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb0_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 9 0>;
+ enable-active-high;
+ };
+
+ reg_usb1_vbus: regulator-usb1-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 8 0>;
+ enable-active-high;
+ };
+
+ reg_lcd_3v3: regulator-lcd-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "lcd-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio3 30 0>;
+ enable-active-high;
+ };
+
+ reg_can_3v3: regulator-can-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "can-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 13 0>;
+ enable-active-high;
+ };
+
+ reg_lcd_5v: regulator-lcd-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "lcd-5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ panel {
+ compatible = "sii,43wvf1g";
+ backlight = <&backlight_display>;
+ dvdd-supply = <®_lcd_3v3>;
+ avdd-supply = <®_lcd_5v>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&display_out>;
+ };
+ };
+ };
+
apb@80000000 {
apbh@80000000 {
gpmi-nand@8000c000 {
@@ -116,31 +197,11 @@
pinctrl-names = "default";
pinctrl-0 = <&lcdif_24bit_pins_a
&lcdif_pins_evk>;
- lcd-supply = <®_lcd_3v3>;
- display = <&display0>;
status = "okay";
- display0: display0 {
- bits-per-pixel = <32>;
- bus-width = <24>;
-
- display-timings {
- native-mode = <&timing0>;
- timing0: timing0 {
- clock-frequency = <33500000>;
- hactive = <800>;
- vactive = <480>;
- hback-porch = <89>;
- hfront-porch = <164>;
- vback-porch = <23>;
- vfront-porch = <10>;
- hsync-len = <10>;
- vsync-len = <10>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
+ port {
+ display_out: endpoint {
+ remote-endpoint = <&panel_in>;
};
};
};
@@ -269,80 +330,6 @@
};
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- reg_3p3v: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "3P3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- reg_vddio_sd0: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "vddio-sd0";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&gpio3 28 0>;
- };
-
- reg_fec_3v3: regulator@2 {
- compatible = "regulator-fixed";
- reg = <2>;
- regulator-name = "fec-3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&gpio2 15 0>;
- };
-
- reg_usb0_vbus: regulator@3 {
- compatible = "regulator-fixed";
- reg = <3>;
- regulator-name = "usb0_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 9 0>;
- enable-active-high;
- };
-
- reg_usb1_vbus: regulator@4 {
- compatible = "regulator-fixed";
- reg = <4>;
- regulator-name = "usb1_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 8 0>;
- enable-active-high;
- };
-
- reg_lcd_3v3: regulator@5 {
- compatible = "regulator-fixed";
- reg = <5>;
- regulator-name = "lcd-3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&gpio3 30 0>;
- enable-active-high;
- };
-
- reg_can_3v3: regulator@6 {
- compatible = "regulator-fixed";
- reg = <6>;
- regulator-name = "can-3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&gpio2 13 0>;
- enable-active-high;
- };
-
- };
-
sound {
compatible = "fsl,imx28-evk-sgtl5000",
"fsl,mxs-audio-sgtl5000";
@@ -363,7 +350,7 @@
};
};
- backlight {
+ backlight_display: backlight {
compatible = "pwm-backlight";
pwms = <&pwm 2 5000000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
index 7cbc2ff..7234e83 100644
--- a/arch/arm/boot/dts/imx7d.dtsi
+++ b/arch/arm/boot/dts/imx7d.dtsi
@@ -126,10 +126,14 @@
interrupt-names = "msi";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 2 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 3 &intc GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 4 &intc GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+ /*
+ * Reference manual lists pci irqs incorrectly
+ * Real hardware ordering is same as imx6: D+MSI, C, B, A
+ */
+ interrupt-map = <0 0 0 1 &intc GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &intc GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX7D_PCIE_CTRL_ROOT_CLK>,
<&clks IMX7D_PLL_ENET_MAIN_100M_CLK>,
<&clks IMX7D_PCIE_PHY_ROOT_CLK>;
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index e2c1276..7eca43f 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -257,6 +257,7 @@
CONFIG_DRM=y
CONFIG_DRM_PANEL_LVDS=y
CONFIG_DRM_PANEL_SIMPLE=y
+CONFIG_DRM_PANEL_SEIKO_43WVF1G=y
CONFIG_DRM_DW_HDMI_AHB_AUDIO=m
CONFIG_DRM_DW_HDMI_CEC=y
CONFIG_DRM_IMX=y
diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig
index 148226e..7b82128 100644
--- a/arch/arm/configs/mxs_defconfig
+++ b/arch/arm/configs/mxs_defconfig
@@ -95,6 +95,7 @@
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_DRM=y
+CONFIG_DRM_PANEL_SEIKO_43WVF1G=y
CONFIG_DRM_MXSFB=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
diff --git a/arch/arm/configs/versatile_defconfig b/arch/arm/configs/versatile_defconfig
index df68dc4..5282324 100644
--- a/arch/arm/configs/versatile_defconfig
+++ b/arch/arm/configs/versatile_defconfig
@@ -5,19 +5,19 @@
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_PARTITION_ADVANCED=y
# CONFIG_ARCH_MULTI_V7 is not set
CONFIG_ARCH_VERSATILE=y
CONFIG_AEABI=y
CONFIG_OABI_COMPAT=y
-CONFIG_CMA=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="root=1f03 mem=32M"
CONFIG_FPE_NWFPE=y
CONFIG_VFP=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_CMA=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
@@ -59,6 +59,7 @@
CONFIG_DRM=y
CONFIG_DRM_PANEL_ARM_VERSATILE=y
CONFIG_DRM_PANEL_SIMPLE=y
+CONFIG_DRM_DUMB_VGA_DAC=y
CONFIG_DRM_PL111=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
@@ -89,9 +90,10 @@
CONFIG_NFSD_V3=y
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_ISO8859_1=m
+CONFIG_FONTS=y
+CONFIG_FONT_ACORN_8x8=y
+CONFIG_DEBUG_FS=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_LL=y
-CONFIG_FONTS=y
-CONFIG_FONT_ACORN_8x8=y
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index f67e8d5..db8d364 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -38,6 +38,7 @@
CONFIG_ARCH_BERLIN=y
CONFIG_ARCH_BRCMSTB=y
CONFIG_ARCH_EXYNOS=y
+CONFIG_ARCH_K3=y
CONFIG_ARCH_LAYERSCAPE=y
CONFIG_ARCH_LG1K=y
CONFIG_ARCH_HISI=y
@@ -605,6 +606,8 @@
CONFIG_ARCH_TEGRA_210_SOC=y
CONFIG_ARCH_TEGRA_186_SOC=y
CONFIG_ARCH_TEGRA_194_SOC=y
+CONFIG_ARCH_K3_AM6_SOC=y
+CONFIG_SOC_TI=y
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
CONFIG_EXTCON_USB_GPIO=y
CONFIG_EXTCON_USBC_CROS_EC=y