extcon: Fix indentation coding style to improve readability
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
diff --git a/include/linux/extcon/extcon-adc-jack.h b/include/linux/extcon/extcon-adc-jack.h
index 20e9eef..9ca958c 100644
--- a/include/linux/extcon/extcon-adc-jack.h
+++ b/include/linux/extcon/extcon-adc-jack.h
@@ -20,10 +20,10 @@
/**
* struct adc_jack_cond - condition to use an extcon state
- * @state - the corresponding extcon state (if 0, this struct denotes
- * the last adc_jack_cond element among the array)
- * @min_adc - min adc value for this condition
- * @max_adc - max adc value for this condition
+ * @state: the corresponding extcon state (if 0, this struct
+ * denotes the last adc_jack_cond element among the array)
+ * @min_adc: min adc value for this condition
+ * @max_adc: max adc value for this condition
*
* For example, if { .state = 0x3, .min_adc = 100, .max_adc = 200}, it means
* that if ADC value is between (inclusive) 100 and 200, than the cable 0 and
@@ -33,34 +33,34 @@
* because when no adc_jack_cond is met, state = 0 is automatically chosen.
*/
struct adc_jack_cond {
- u32 state; /* extcon state value. 0 if invalid */
+ u32 state; /* extcon state value. 0 if invalid */
u32 min_adc;
u32 max_adc;
};
/**
* struct adc_jack_pdata - platform data for adc jack device.
- * @name - name of the extcon device. If null, "adc-jack" is used.
- * @consumer_channel - Unique name to identify the channel on the consumer
- * side. This typically describes the channels used within
- * the consumer. E.g. 'battery_voltage'
- * @cable_names - array of cable names ending with null.
- * @adc_contitions - array of struct adc_jack_cond conditions ending
- * with .state = 0 entry. This describes how to decode
- * adc values into extcon state.
- * @irq_flags - irq flags used for the @irq
- * @handling_delay_ms - in some devices, we need to read ADC value some
- * milli-seconds after the interrupt occurs. You may
- * describe such delays with @handling_delay_ms, which
- * is rounded-off by jiffies.
+ * @name: name of the extcon device. If null, "adc-jack" is used.
+ * @consumer_channel: Unique name to identify the channel on the consumer
+ * side. This typically describes the channels used within
+ * the consumer. E.g. 'battery_voltage'
+ * @cable_names: array of cable names ending with null.
+ * @adc_contitions: array of struct adc_jack_cond conditions ending
+ * with .state = 0 entry. This describes how to decode
+ * adc values into extcon state.
+ * @irq_flags: irq flags used for the @irq
+ * @handling_delay_ms: in some devices, we need to read ADC value some
+ * milli-seconds after the interrupt occurs. You may
+ * describe such delays with @handling_delay_ms, which
+ * is rounded-off by jiffies.
*/
struct adc_jack_pdata {
const char *name;
const char *consumer_channel;
- /*
- * The last entry should be NULL
- */
+
+ /* The last entry should be NULL */
const char **cable_names;
+
/* The last entry's state should be 0 */
struct adc_jack_cond *adc_conditions;
diff --git a/include/linux/extcon/extcon-gpio.h b/include/linux/extcon/extcon-gpio.h
index 2d8307f..4ce1aa7 100644
--- a/include/linux/extcon/extcon-gpio.h
+++ b/include/linux/extcon/extcon-gpio.h
@@ -25,14 +25,14 @@
/**
* struct gpio_extcon_platform_data - A simple GPIO-controlled extcon device.
- * @name The name of this GPIO extcon device.
- * @gpio Corresponding GPIO.
- * @debounce Debounce time for GPIO IRQ in ms.
- * @irq_flags IRQ Flags (e.g., IRQF_TRIGGER_LOW).
- * @state_on print_state is overriden with state_on if attached. If Null,
- * default method of extcon class is used.
- * @state_off print_state is overriden with state_on if detached. If Null,
- * default method of extcon class is used.
+ * @name: The name of this GPIO extcon device.
+ * @gpio: Corresponding GPIO.
+ * @debounce: Debounce time for GPIO IRQ in ms.
+ * @irq_flags: IRQ Flags (e.g., IRQF_TRIGGER_LOW).
+ * @state_on: print_state is overriden with state_on if attached.
+ * If NULL, default method of extcon class is used.
+ * @state_off: print_state is overriden with state_on if detached.
+ * If NUll, default method of extcon class is used.
*
* Note that in order for state_on or state_off to be valid, both state_on
* and state_off should be not NULL. If at least one of them is NULL,