Merge branch 'topic/atomic-conversion' into drm-intel-next-queued
The i915 atomic conversion is a real beast and it's not getting easier
wrangling in a separate branch. I'm might be regretting this, but
right after vacation nothing can burst my little bubble here!
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index 2ad71ef..698c0a2 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -2783,13 +2783,16 @@
seq_printf(m, "---------\n");
for_each_intel_crtc(dev, crtc) {
bool active;
+ struct intel_crtc_state *pipe_config;
int x, y;
+ pipe_config = to_intel_crtc_state(crtc->base.state);
+
seq_printf(m, "CRTC %d: pipe: %c, active=%s (size=%dx%d)\n",
crtc->base.base.id, pipe_name(crtc->pipe),
- yesno(crtc->active), crtc->config->pipe_src_w,
- crtc->config->pipe_src_h);
- if (crtc->active) {
+ yesno(pipe_config->base.active),
+ pipe_config->pipe_src_w, pipe_config->pipe_src_h);
+ if (pipe_config->base.active) {
intel_crtc_info(m, crtc);
active = cursor_position(dev, crtc->pipe, &x, &y);
@@ -3030,7 +3033,7 @@
seq_puts(m, "\n\n");
- if (intel_crtc->config->has_drrs) {
+ if (to_intel_crtc_state(intel_crtc->base.state)->has_drrs) {
struct intel_panel *panel;
mutex_lock(&drrs->mutex);
@@ -3082,7 +3085,7 @@
for_each_intel_crtc(dev, intel_crtc) {
drm_modeset_lock(&intel_crtc->base.mutex, NULL);
- if (intel_crtc->active) {
+ if (intel_crtc->base.state->active) {
active_crtc_cnt++;
seq_printf(m, "\nCRTC %d: ", active_crtc_cnt);
@@ -3624,22 +3627,33 @@
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *crtc =
to_intel_crtc(dev_priv->pipe_to_crtc_mapping[PIPE_A]);
+ struct intel_crtc_state *pipe_config;
drm_modeset_lock_all(dev);
+ pipe_config = to_intel_crtc_state(crtc->base.state);
+
/*
* If we use the eDP transcoder we need to make sure that we don't
* bypass the pfit, since otherwise the pipe CRC source won't work. Only
* relevant on hsw with pipe A when using the always-on power well
* routing.
*/
- if (crtc->config->cpu_transcoder == TRANSCODER_EDP &&
- !crtc->config->pch_pfit.enabled) {
- crtc->config->pch_pfit.force_thru = true;
+ if (pipe_config->cpu_transcoder == TRANSCODER_EDP &&
+ !pipe_config->pch_pfit.enabled) {
+ bool active = pipe_config->base.active;
+
+ if (active) {
+ intel_crtc_control(&crtc->base, false);
+ pipe_config = to_intel_crtc_state(crtc->base.state);
+ }
+
+ pipe_config->pch_pfit.force_thru = true;
intel_display_power_get(dev_priv,
POWER_DOMAIN_PIPE_PANEL_FITTER(PIPE_A));
- intel_crtc_reset(crtc);
+ if (active)
+ intel_crtc_control(&crtc->base, true);
}
drm_modeset_unlock_all(dev);
}
@@ -3649,6 +3663,7 @@
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *crtc =
to_intel_crtc(dev_priv->pipe_to_crtc_mapping[PIPE_A]);
+ struct intel_crtc_state *pipe_config;
drm_modeset_lock_all(dev);
/*
@@ -3657,13 +3672,22 @@
* relevant on hsw with pipe A when using the always-on power well
* routing.
*/
- if (crtc->config->pch_pfit.force_thru) {
- crtc->config->pch_pfit.force_thru = false;
+ pipe_config = to_intel_crtc_state(crtc->base.state);
+ if (pipe_config->pch_pfit.force_thru) {
+ bool active = pipe_config->base.active;
- intel_crtc_reset(crtc);
+ if (active) {
+ intel_crtc_control(&crtc->base, false);
+ pipe_config = to_intel_crtc_state(crtc->base.state);
+ }
+
+ pipe_config->pch_pfit.force_thru = false;
intel_display_power_put(dev_priv,
POWER_DOMAIN_PIPE_PANEL_FITTER(PIPE_A));
+
+ if (active)
+ intel_crtc_control(&crtc->base, true);
}
drm_modeset_unlock_all(dev);
}
@@ -3779,7 +3803,7 @@
pipe_name(pipe));
drm_modeset_lock(&crtc->base.mutex, NULL);
- if (crtc->active)
+ if (crtc->base.state->active)
intel_wait_for_vblank(dev, pipe);
drm_modeset_unlock(&crtc->base.mutex);
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index a051a02..78ef0bb 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -601,7 +601,6 @@
static int i915_drm_suspend(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
- struct drm_crtc *crtc;
pci_power_t opregion_target_state;
int error;
@@ -632,8 +631,7 @@
* for _thaw. Also, power gate the CRTC power wells.
*/
drm_modeset_lock_all(dev);
- for_each_crtc(dev, crtc)
- intel_crtc_control(crtc, false);
+ intel_display_suspend(dev);
drm_modeset_unlock_all(dev);
intel_dp_mst_suspend(dev);
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 44efb4d..617b01f 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -376,7 +376,6 @@
struct intel_shared_dpll {
struct intel_shared_dpll_config config;
- struct intel_shared_dpll_config *new_config;
int active; /* count of number of active CRTCs (i.e. DPMS on) */
bool on; /* is the PLL actually active? Disabled during modeset */
@@ -631,7 +630,6 @@
struct intel_crtc_state *crtc_state);
void (*crtc_enable)(struct drm_crtc *crtc);
void (*crtc_disable)(struct drm_crtc *crtc);
- void (*off)(struct drm_crtc *crtc);
void (*audio_codec_enable)(struct drm_connector *connector,
struct intel_encoder *encoder,
struct drm_display_mode *mode);
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index eb52a03..56db9e74 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -564,8 +564,7 @@
u32 high1, high2, low, pixel, vbl_start, hsync_start, htotal;
struct intel_crtc *intel_crtc =
to_intel_crtc(dev_priv->pipe_to_crtc_mapping[pipe]);
- const struct drm_display_mode *mode =
- &intel_crtc->config->base.adjusted_mode;
+ const struct drm_display_mode *mode = &intel_crtc->base.hwmode;
htotal = mode->crtc_htotal;
hsync_start = mode->crtc_hsync_start;
@@ -620,7 +619,7 @@
{
struct drm_device *dev = crtc->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
- const struct drm_display_mode *mode = &crtc->config->base.adjusted_mode;
+ const struct drm_display_mode *mode = &crtc->base.hwmode;
enum pipe pipe = crtc->pipe;
int position, vtotal;
@@ -647,14 +646,14 @@
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
- const struct drm_display_mode *mode = &intel_crtc->config->base.adjusted_mode;
+ const struct drm_display_mode *mode = &intel_crtc->base.hwmode;
int position;
int vbl_start, vbl_end, hsync_start, htotal, vtotal;
bool in_vbl = true;
int ret = 0;
unsigned long irqflags;
- if (!intel_crtc->active) {
+ if (WARN_ON(!mode->crtc_clock)) {
DRM_DEBUG_DRIVER("trying to get scanoutpos for disabled "
"pipe %c\n", pipe_name(pipe));
return 0;
@@ -796,7 +795,7 @@
return -EINVAL;
}
- if (!crtc->state->enable) {
+ if (!crtc->hwmode.crtc_clock) {
DRM_DEBUG_KMS("crtc %d is disabled\n", pipe);
return -EBUSY;
}
@@ -805,7 +804,7 @@
return drm_calc_vbltimestamp_from_scanoutpos(dev, pipe, max_error,
vblank_time, flags,
crtc,
- &to_intel_crtc(crtc)->config->base.adjusted_mode);
+ &crtc->hwmode);
}
static bool intel_hpd_irq_event(struct drm_device *dev,
diff --git a/drivers/gpu/drm/i915/intel_atomic.c b/drivers/gpu/drm/i915/intel_atomic.c
index 7ed8033..4df6d2d 100644
--- a/drivers/gpu/drm/i915/intel_atomic.c
+++ b/drivers/gpu/drm/i915/intel_atomic.c
@@ -129,6 +129,8 @@
struct drm_atomic_state *state,
bool async)
{
+ struct drm_crtc_state *crtc_state;
+ struct drm_crtc *crtc;
int ret;
int i;
@@ -142,48 +144,19 @@
return ret;
/* Point of no return */
+ drm_atomic_helper_swap_state(dev, state);
- /*
- * FIXME: The proper sequence here will eventually be:
- *
- * drm_atomic_helper_swap_state(dev, state)
- * drm_atomic_helper_commit_modeset_disables(dev, state);
- * drm_atomic_helper_commit_planes(dev, state);
- * drm_atomic_helper_commit_modeset_enables(dev, state);
- * drm_atomic_helper_wait_for_vblanks(dev, state);
- * drm_atomic_helper_cleanup_planes(dev, state);
- * drm_atomic_state_free(state);
- *
- * once we have full atomic modeset. For now, just manually update
- * plane states to avoid clobbering good states with dummy states
- * while nuclear pageflipping.
- */
- for (i = 0; i < dev->mode_config.num_total_plane; i++) {
- struct drm_plane *plane = state->planes[i];
-
- if (!plane)
- continue;
-
- plane->state->state = state;
- swap(state->plane_states[i], plane->state);
- plane->state->state = NULL;
- }
-
- /* swap crtc_scaler_state */
- for (i = 0; i < dev->mode_config.num_crtc; i++) {
- struct drm_crtc *crtc = state->crtcs[i];
- if (!crtc) {
- continue;
- }
-
- to_intel_crtc(crtc)->config->scaler_state =
- to_intel_crtc_state(state->crtc_states[i])->scaler_state;
+ for_each_crtc_in_state(state, crtc, crtc_state, i) {
+ to_intel_crtc(crtc)->config = to_intel_crtc_state(crtc->state);
if (INTEL_INFO(dev)->gen >= 9)
skl_detach_scalers(to_intel_crtc(crtc));
+
+ drm_atomic_helper_commit_planes_on_crtc(crtc_state);
}
- drm_atomic_helper_commit_planes(dev, state);
+ /* FIXME: This function should eventually call __intel_set_mode when needed */
+
drm_atomic_helper_wait_for_vblanks(dev, state);
drm_atomic_helper_cleanup_planes(dev, state);
drm_atomic_state_free(state);
@@ -421,3 +394,54 @@
return 0;
}
+
+static void
+intel_atomic_duplicate_dpll_state(struct drm_i915_private *dev_priv,
+ struct intel_shared_dpll_config *shared_dpll)
+{
+ enum intel_dpll_id i;
+
+ /* Copy shared dpll state */
+ for (i = 0; i < dev_priv->num_shared_dpll; i++) {
+ struct intel_shared_dpll *pll = &dev_priv->shared_dplls[i];
+
+ shared_dpll[i] = pll->config;
+ }
+}
+
+struct intel_shared_dpll_config *
+intel_atomic_get_shared_dpll_state(struct drm_atomic_state *s)
+{
+ struct intel_atomic_state *state = to_intel_atomic_state(s);
+
+ WARN_ON(!drm_modeset_is_locked(&s->dev->mode_config.connection_mutex));
+
+ if (!state->dpll_set) {
+ state->dpll_set = true;
+
+ intel_atomic_duplicate_dpll_state(to_i915(s->dev),
+ state->shared_dpll);
+ }
+
+ return state->shared_dpll;
+}
+
+struct drm_atomic_state *
+intel_atomic_state_alloc(struct drm_device *dev)
+{
+ struct intel_atomic_state *state = kzalloc(sizeof(*state), GFP_KERNEL);
+
+ if (!state || drm_atomic_state_init(dev, &state->base) < 0) {
+ kfree(state);
+ return NULL;
+ }
+
+ return &state->base;
+}
+
+void intel_atomic_state_clear(struct drm_atomic_state *s)
+{
+ struct intel_atomic_state *state = to_intel_atomic_state(s);
+ drm_atomic_state_default_clear(&state->base);
+ state->dpll_set = false;
+}
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 9c07098..df23838 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -86,8 +86,7 @@
static void ironlake_pch_clock_get(struct intel_crtc *crtc,
struct intel_crtc_state *pipe_config);
-static int intel_set_mode(struct drm_crtc *crtc,
- struct drm_atomic_state *state);
+static int intel_set_mode(struct drm_atomic_state *state);
static int intel_framebuffer_init(struct drm_device *dev,
struct intel_framebuffer *ifb,
struct drm_mode_fb_cmd2 *mode_cmd,
@@ -431,6 +430,12 @@
clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
}
+static bool
+needs_modeset(struct drm_crtc_state *state)
+{
+ return state->mode_changed || state->active_changed;
+}
+
/**
* Returns whether any output on the specified pipe is of the specified type
*/
@@ -1693,7 +1698,7 @@
int count = 0;
for_each_intel_crtc(dev, crtc)
- count += crtc->active &&
+ count += crtc->base.state->active &&
intel_pipe_has_type(crtc, INTEL_OUTPUT_DVO);
return count;
@@ -1774,7 +1779,7 @@
/* Disable DVO 2x clock on both PLLs if necessary */
if (IS_I830(dev) &&
intel_pipe_has_type(crtc, INTEL_OUTPUT_DVO) &&
- intel_num_dvo_pipes(dev) == 1) {
+ !intel_num_dvo_pipes(dev)) {
I915_WRITE(DPLL(PIPE_B),
I915_READ(DPLL(PIPE_B)) & ~DPLL_DVO_2X_MODE);
I915_WRITE(DPLL(PIPE_A),
@@ -2630,9 +2635,9 @@
dev_priv->preserve_bios_swizzle = true;
primary->fb = fb;
- primary->state->crtc = &intel_crtc->base;
- primary->crtc = &intel_crtc->base;
+ primary->crtc = primary->state->crtc = &intel_crtc->base;
update_state_fb(primary);
+ intel_crtc->base.state->plane_mask |= (1 << drm_plane_index(primary));
obj->frontbuffer_bits |= INTEL_FRONTBUFFER_PRIMARY(intel_crtc->pipe);
}
@@ -3179,24 +3184,8 @@
}
}
-void intel_crtc_reset(struct intel_crtc *crtc)
-{
- struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
-
- if (!crtc->active)
- return;
-
- intel_crtc_disable_planes(&crtc->base);
- dev_priv->display.crtc_disable(&crtc->base);
- dev_priv->display.crtc_enable(&crtc->base);
- intel_crtc_enable_planes(&crtc->base);
-}
-
void intel_prepare_reset(struct drm_device *dev)
{
- struct drm_i915_private *dev_priv = to_i915(dev);
- struct intel_crtc *crtc;
-
/* no reset support for gen2 */
if (IS_GEN2(dev))
return;
@@ -3206,18 +3195,11 @@
return;
drm_modeset_lock_all(dev);
-
/*
* Disabling the crtcs gracefully seems nicer. Also the
* g33 docs say we should at least disable all the planes.
*/
- for_each_intel_crtc(dev, crtc) {
- if (!crtc->active)
- continue;
-
- intel_crtc_disable_planes(&crtc->base);
- dev_priv->display.crtc_disable(&crtc->base);
- }
+ intel_display_suspend(dev);
}
void intel_finish_reset(struct drm_device *dev)
@@ -4203,34 +4185,16 @@
lpt_enable_pch_transcoder(dev_priv, cpu_transcoder);
}
-void intel_put_shared_dpll(struct intel_crtc *crtc)
-{
- struct intel_shared_dpll *pll = intel_crtc_to_shared_dpll(crtc);
-
- if (pll == NULL)
- return;
-
- if (!(pll->config.crtc_mask & (1 << crtc->pipe))) {
- WARN(1, "bad %s crtc mask\n", pll->name);
- return;
- }
-
- pll->config.crtc_mask &= ~(1 << crtc->pipe);
- if (pll->config.crtc_mask == 0) {
- WARN_ON(pll->on);
- WARN_ON(pll->active);
- }
-
- crtc->config->shared_dpll = DPLL_ID_PRIVATE;
-}
-
struct intel_shared_dpll *intel_get_shared_dpll(struct intel_crtc *crtc,
struct intel_crtc_state *crtc_state)
{
struct drm_i915_private *dev_priv = crtc->base.dev->dev_private;
struct intel_shared_dpll *pll;
+ struct intel_shared_dpll_config *shared_dpll;
enum intel_dpll_id i;
+ shared_dpll = intel_atomic_get_shared_dpll_state(crtc_state->base.state);
+
if (HAS_PCH_IBX(dev_priv->dev)) {
/* Ironlake PCH has a fixed PLL->PCH pipe mapping. */
i = (enum intel_dpll_id) crtc->pipe;
@@ -4239,7 +4203,7 @@
DRM_DEBUG_KMS("CRTC:%d using pre-allocated %s\n",
crtc->base.base.id, pll->name);
- WARN_ON(pll->new_config->crtc_mask);
+ WARN_ON(shared_dpll[i].crtc_mask);
goto found;
}
@@ -4259,7 +4223,7 @@
pll = &dev_priv->shared_dplls[i];
DRM_DEBUG_KMS("CRTC:%d using pre-allocated %s\n",
crtc->base.base.id, pll->name);
- WARN_ON(pll->new_config->crtc_mask);
+ WARN_ON(shared_dpll[i].crtc_mask);
goto found;
}
@@ -4268,15 +4232,15 @@
pll = &dev_priv->shared_dplls[i];
/* Only want to check enabled timings first */
- if (pll->new_config->crtc_mask == 0)
+ if (shared_dpll[i].crtc_mask == 0)
continue;
if (memcmp(&crtc_state->dpll_hw_state,
- &pll->new_config->hw_state,
- sizeof(pll->new_config->hw_state)) == 0) {
+ &shared_dpll[i].hw_state,
+ sizeof(crtc_state->dpll_hw_state)) == 0) {
DRM_DEBUG_KMS("CRTC:%d sharing existing %s (crtc mask 0x%08x, ative %d)\n",
crtc->base.base.id, pll->name,
- pll->new_config->crtc_mask,
+ shared_dpll[i].crtc_mask,
pll->active);
goto found;
}
@@ -4285,7 +4249,7 @@
/* Ok no matching timings, maybe there's a free one? */
for (i = 0; i < dev_priv->num_shared_dpll; i++) {
pll = &dev_priv->shared_dplls[i];
- if (pll->new_config->crtc_mask == 0) {
+ if (shared_dpll[i].crtc_mask == 0) {
DRM_DEBUG_KMS("CRTC:%d allocated %s\n",
crtc->base.base.id, pll->name);
goto found;
@@ -4295,83 +4259,33 @@
return NULL;
found:
- if (pll->new_config->crtc_mask == 0)
- pll->new_config->hw_state = crtc_state->dpll_hw_state;
+ if (shared_dpll[i].crtc_mask == 0)
+ shared_dpll[i].hw_state =
+ crtc_state->dpll_hw_state;
crtc_state->shared_dpll = i;
DRM_DEBUG_DRIVER("using %s for pipe %c\n", pll->name,
pipe_name(crtc->pipe));
- pll->new_config->crtc_mask |= 1 << crtc->pipe;
+ shared_dpll[i].crtc_mask |= 1 << crtc->pipe;
return pll;
}
-/**
- * intel_shared_dpll_start_config - start a new PLL staged config
- * @dev_priv: DRM device
- * @clear_pipes: mask of pipes that will have their PLLs freed
- *
- * Starts a new PLL staged config, copying the current config but
- * releasing the references of pipes specified in clear_pipes.
- */
-static int intel_shared_dpll_start_config(struct drm_i915_private *dev_priv,
- unsigned clear_pipes)
+static void intel_shared_dpll_commit(struct drm_atomic_state *state)
{
+ struct drm_i915_private *dev_priv = to_i915(state->dev);
+ struct intel_shared_dpll_config *shared_dpll;
struct intel_shared_dpll *pll;
enum intel_dpll_id i;
+ if (!to_intel_atomic_state(state)->dpll_set)
+ return;
+
+ shared_dpll = to_intel_atomic_state(state)->shared_dpll;
for (i = 0; i < dev_priv->num_shared_dpll; i++) {
pll = &dev_priv->shared_dplls[i];
-
- pll->new_config = kmemdup(&pll->config, sizeof pll->config,
- GFP_KERNEL);
- if (!pll->new_config)
- goto cleanup;
-
- pll->new_config->crtc_mask &= ~clear_pipes;
- }
-
- return 0;
-
-cleanup:
- while (--i >= 0) {
- pll = &dev_priv->shared_dplls[i];
- kfree(pll->new_config);
- pll->new_config = NULL;
- }
-
- return -ENOMEM;
-}
-
-static void intel_shared_dpll_commit(struct drm_i915_private *dev_priv)
-{
- struct intel_shared_dpll *pll;
- enum intel_dpll_id i;
-
- for (i = 0; i < dev_priv->num_shared_dpll; i++) {
- pll = &dev_priv->shared_dplls[i];
-
- WARN_ON(pll->new_config == &pll->config);
-
- pll->config = *pll->new_config;
- kfree(pll->new_config);
- pll->new_config = NULL;
- }
-}
-
-static void intel_shared_dpll_abort_config(struct drm_i915_private *dev_priv)
-{
- struct intel_shared_dpll *pll;
- enum intel_dpll_id i;
-
- for (i = 0; i < dev_priv->num_shared_dpll; i++) {
- pll = &dev_priv->shared_dplls[i];
-
- WARN_ON(pll->new_config == &pll->config);
-
- kfree(pll->new_config);
- pll->new_config = NULL;
+ pll->config = shared_dpll[i];
}
}
@@ -4671,7 +4585,7 @@
bool reenable_ips = false;
/* The clocks have to be on to load the palette. */
- if (!crtc->state->enable || !intel_crtc->active)
+ if (!crtc->state->active)
return;
if (HAS_GMCH_DISPLAY(dev_priv->dev)) {
@@ -4838,7 +4752,8 @@
intel_enable_primary_hw_plane(crtc->primary, crtc);
intel_enable_sprite_planes(crtc);
- intel_crtc_update_cursor(crtc, true);
+ if (to_intel_plane_state(crtc->cursor->state)->visible)
+ intel_crtc_update_cursor(crtc, true);
intel_post_enable_primary(crtc);
@@ -4887,9 +4802,7 @@
struct intel_encoder *encoder;
int pipe = intel_crtc->pipe;
- WARN_ON(!crtc->state->enable);
-
- if (intel_crtc->active)
+ if (WARN_ON(intel_crtc->active))
return;
if (intel_crtc->config->has_pch_encoder)
@@ -4956,46 +4869,17 @@
return HAS_IPS(crtc->base.dev) && crtc->pipe == PIPE_A;
}
-/*
- * This implements the workaround described in the "notes" section of the mode
- * set sequence documentation. When going from no pipes or single pipe to
- * multiple pipes, and planes are enabled after the pipe, we need to wait at
- * least 2 vblanks on the first pipe before enabling planes on the second pipe.
- */
-static void haswell_mode_set_planes_workaround(struct intel_crtc *crtc)
-{
- struct drm_device *dev = crtc->base.dev;
- struct intel_crtc *crtc_it, *other_active_crtc = NULL;
-
- /* We want to get the other_active_crtc only if there's only 1 other
- * active crtc. */
- for_each_intel_crtc(dev, crtc_it) {
- if (!crtc_it->active || crtc_it == crtc)
- continue;
-
- if (other_active_crtc)
- return;
-
- other_active_crtc = crtc_it;
- }
- if (!other_active_crtc)
- return;
-
- intel_wait_for_vblank(dev, other_active_crtc->pipe);
- intel_wait_for_vblank(dev, other_active_crtc->pipe);
-}
-
static void haswell_crtc_enable(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
struct intel_encoder *encoder;
- int pipe = intel_crtc->pipe;
+ int pipe = intel_crtc->pipe, hsw_workaround_pipe;
+ struct intel_crtc_state *pipe_config =
+ to_intel_crtc_state(crtc->state);
- WARN_ON(!crtc->state->enable);
-
- if (intel_crtc->active)
+ if (WARN_ON(intel_crtc->active))
return;
if (intel_crtc_to_shared_dpll(intel_crtc))
@@ -5070,7 +4954,11 @@
/* If we change the relative order between pipe/planes enabling, we need
* to change the workaround. */
- haswell_mode_set_planes_workaround(intel_crtc);
+ hsw_workaround_pipe = pipe_config->hsw_workaround_pipe;
+ if (IS_HASWELL(dev) && hsw_workaround_pipe != INVALID_PIPE) {
+ intel_wait_for_vblank(dev, hsw_workaround_pipe);
+ intel_wait_for_vblank(dev, hsw_workaround_pipe);
+ }
}
static void ironlake_pfit_disable(struct intel_crtc *crtc)
@@ -5097,7 +4985,7 @@
int pipe = intel_crtc->pipe;
u32 reg, temp;
- if (!intel_crtc->active)
+ if (WARN_ON(!intel_crtc->active))
return;
for_each_encoder_on_crtc(dev, crtc, encoder)
@@ -5160,7 +5048,7 @@
struct intel_encoder *encoder;
enum transcoder cpu_transcoder = intel_crtc->config->cpu_transcoder;
- if (!intel_crtc->active)
+ if (WARN_ON(!intel_crtc->active))
return;
for_each_encoder_on_crtc(dev, crtc, encoder) {
@@ -5210,13 +5098,6 @@
intel_disable_shared_dpll(intel_crtc);
}
-static void ironlake_crtc_off(struct drm_crtc *crtc)
-{
- struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
- intel_put_shared_dpll(intel_crtc);
-}
-
-
static void i9xx_pfit_enable(struct intel_crtc *crtc)
{
struct drm_device *dev = crtc->base.dev;
@@ -6012,7 +5893,7 @@
struct drm_crtc *crtc;
struct drm_crtc_state *crtc_state;
int max_pixclk = intel_mode_max_pixclk(state->dev, state);
- int cdclk, i;
+ int cdclk, ret = 0;
if (max_pixclk < 0)
return max_pixclk;
@@ -6027,20 +5908,25 @@
/* add all active pipes to the state */
for_each_crtc(state->dev, crtc) {
- if (!crtc->state->enable)
- continue;
-
crtc_state = drm_atomic_get_crtc_state(state, crtc);
if (IS_ERR(crtc_state))
return PTR_ERR(crtc_state);
+
+ if (!crtc_state->active || needs_modeset(crtc_state))
+ continue;
+
+ crtc_state->mode_changed = true;
+
+ ret = drm_atomic_add_affected_connectors(state, crtc);
+ if (ret)
+ break;
+
+ ret = drm_atomic_add_affected_planes(state, crtc);
+ if (ret)
+ break;
}
- /* disable/enable all currently active pipes while we change cdclk */
- for_each_crtc_in_state(state, crtc, crtc_state, i)
- if (crtc_state->enable)
- crtc_state->mode_changed = true;
-
- return 0;
+ return ret;
}
static void vlv_program_pfi_credits(struct drm_i915_private *dev_priv)
@@ -6125,9 +6011,7 @@
int pipe = intel_crtc->pipe;
bool is_dsi;
- WARN_ON(!crtc->state->enable);
-
- if (intel_crtc->active)
+ if (WARN_ON(intel_crtc->active))
return;
is_dsi = intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_DSI);
@@ -6203,9 +6087,7 @@
struct intel_encoder *encoder;
int pipe = intel_crtc->pipe;
- WARN_ON(!crtc->state->enable);
-
- if (intel_crtc->active)
+ if (WARN_ON(intel_crtc->active))
return;
i9xx_set_pll_dividers(intel_crtc);
@@ -6265,7 +6147,7 @@
struct intel_encoder *encoder;
int pipe = intel_crtc->pipe;
- if (!intel_crtc->active)
+ if (WARN_ON(!intel_crtc->active))
return;
/*
@@ -6310,40 +6192,81 @@
mutex_unlock(&dev->struct_mutex);
}
-static void i9xx_crtc_off(struct drm_crtc *crtc)
+static void intel_crtc_disable_noatomic(struct drm_crtc *crtc)
{
-}
-
-/* Master function to enable/disable CRTC and corresponding power wells */
-void intel_crtc_control(struct drm_crtc *crtc, bool enable)
-{
- struct drm_device *dev = crtc->dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ struct drm_i915_private *dev_priv = to_i915(crtc->dev);
enum intel_display_power_domain domain;
unsigned long domains;
- if (enable) {
- if (!intel_crtc->active) {
- domains = get_crtc_power_domains(crtc);
- for_each_power_domain(domain, domains)
- intel_display_power_get(dev_priv, domain);
- intel_crtc->enabled_power_domains = domains;
+ if (!intel_crtc->active)
+ return;
- dev_priv->display.crtc_enable(crtc);
- intel_crtc_enable_planes(crtc);
- }
- } else {
- if (intel_crtc->active) {
- intel_crtc_disable_planes(crtc);
- dev_priv->display.crtc_disable(crtc);
+ intel_crtc_disable_planes(crtc);
+ dev_priv->display.crtc_disable(crtc);
- domains = intel_crtc->enabled_power_domains;
- for_each_power_domain(domain, domains)
- intel_display_power_put(dev_priv, domain);
- intel_crtc->enabled_power_domains = 0;
- }
+ domains = intel_crtc->enabled_power_domains;
+ for_each_power_domain(domain, domains)
+ intel_display_power_put(dev_priv, domain);
+ intel_crtc->enabled_power_domains = 0;
+}
+
+/*
+ * turn all crtc's off, but do not adjust state
+ * This has to be paired with a call to intel_modeset_setup_hw_state.
+ */
+void intel_display_suspend(struct drm_device *dev)
+{
+ struct drm_crtc *crtc;
+
+ for_each_crtc(dev, crtc)
+ intel_crtc_disable_noatomic(crtc);
+}
+
+/* Master function to enable/disable CRTC and corresponding power wells */
+int intel_crtc_control(struct drm_crtc *crtc, bool enable)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_mode_config *config = &dev->mode_config;
+ struct drm_modeset_acquire_ctx *ctx = config->acquire_ctx;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ struct intel_crtc_state *pipe_config;
+ struct drm_atomic_state *state;
+ int ret;
+
+ if (enable == intel_crtc->active)
+ return 0;
+
+ if (enable && !crtc->state->enable)
+ return 0;
+
+ /* this function should be called with drm_modeset_lock_all for now */
+ if (WARN_ON(!ctx))
+ return -EIO;
+ lockdep_assert_held(&ctx->ww_ctx);
+
+ state = drm_atomic_state_alloc(dev);
+ if (WARN_ON(!state))
+ return -ENOMEM;
+
+ state->acquire_ctx = ctx;
+ state->allow_modeset = true;
+
+ pipe_config = intel_atomic_get_crtc_state(state, intel_crtc);
+ if (IS_ERR(pipe_config)) {
+ ret = PTR_ERR(pipe_config);
+ goto err;
}
+ pipe_config->base.active = enable;
+
+ ret = intel_set_mode(state);
+ if (!ret)
+ return ret;
+
+err:
+ DRM_ERROR("Updating crtc active failed with %i\n", ret);
+ drm_atomic_state_free(state);
+ return ret;
}
/**
@@ -6359,36 +6282,6 @@
enable |= intel_encoder->connectors_active;
intel_crtc_control(crtc, enable);
-
- crtc->state->active = enable;
-}
-
-static void intel_crtc_disable(struct drm_crtc *crtc)
-{
- struct drm_device *dev = crtc->dev;
- struct drm_connector *connector;
- struct drm_i915_private *dev_priv = dev->dev_private;
-
- /* crtc should still be enabled when we disable it. */
- WARN_ON(!crtc->state->enable);
-
- intel_crtc_disable_planes(crtc);
- dev_priv->display.crtc_disable(crtc);
- dev_priv->display.off(crtc);
-
- drm_plane_helper_disable(crtc->primary);
-
- /* Update computed state. */
- list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
- if (!connector->encoder || !connector->encoder->crtc)
- continue;
-
- if (connector->encoder->crtc != crtc)
- continue;
-
- connector->dpms = DRM_MODE_DPMS_OFF;
- to_intel_encoder(connector->encoder)->connectors_active = false;
- }
}
void intel_encoder_destroy(struct drm_encoder *encoder)
@@ -10538,7 +10431,7 @@
drm_mode_copy(&crtc_state->base.mode, mode);
- if (intel_set_mode(crtc, state)) {
+ if (intel_set_mode(state)) {
DRM_DEBUG_KMS("failed to set mode on load-detect pipe\n");
if (old->release_fb)
old->release_fb->funcs->destroy(old->release_fb);
@@ -10612,7 +10505,7 @@
if (ret)
goto fail;
- ret = intel_set_mode(crtc, state);
+ ret = intel_set_mode(state);
if (ret)
goto fail;
@@ -11730,8 +11623,35 @@
kfree(work);
if (ret == -EIO) {
+ struct drm_atomic_state *state;
+ struct drm_plane_state *plane_state;
+
out_hang:
- ret = intel_plane_restore(primary);
+ state = drm_atomic_state_alloc(dev);
+ if (!state)
+ return -ENOMEM;
+ state->acquire_ctx = drm_modeset_legacy_acquire_ctx(crtc);
+
+retry:
+ plane_state = drm_atomic_get_plane_state(state, primary);
+ ret = PTR_ERR_OR_ZERO(plane_state);
+ if (!ret) {
+ drm_atomic_set_fb_for_plane(plane_state, fb);
+
+ ret = drm_atomic_set_crtc_for_plane(plane_state, crtc);
+ if (!ret)
+ ret = drm_atomic_commit(state);
+ }
+
+ if (ret == -EDEADLK) {
+ drm_modeset_backoff(state->acquire_ctx);
+ drm_atomic_state_clear(state);
+ goto retry;
+ }
+
+ if (ret)
+ drm_atomic_state_free(state);
+
if (ret == 0 && event) {
spin_lock_irq(&dev->event_lock);
drm_send_vblank_event(dev, pipe, event);
@@ -11796,43 +11716,6 @@
}
}
-/* Fixup legacy state after an atomic state swap.
- */
-static void intel_modeset_fixup_state(struct drm_atomic_state *state)
-{
- struct intel_crtc *crtc;
- struct intel_encoder *encoder;
- struct intel_connector *connector;
-
- for_each_intel_connector(state->dev, connector) {
- connector->base.encoder = connector->base.state->best_encoder;
- if (connector->base.encoder)
- connector->base.encoder->crtc =
- connector->base.state->crtc;
- }
-
- /* Update crtc of disabled encoders */
- for_each_intel_encoder(state->dev, encoder) {
- int num_connectors = 0;
-
- for_each_intel_connector(state->dev, connector)
- if (connector->base.encoder == &encoder->base)
- num_connectors++;
-
- if (num_connectors == 0)
- encoder->base.crtc = NULL;
- }
-
- for_each_intel_crtc(state->dev, crtc) {
- crtc->base.enabled = crtc->base.state->enable;
- crtc->config = to_intel_crtc_state(crtc->base.state);
- }
-
- /* Copy the new configuration to the staged state, to keep the few
- * pieces of code that haven't been converted yet happy */
- intel_modeset_update_staged_output_state(state->dev);
-}
-
static void
connected_sink_compute_bpp(struct intel_connector *connector,
struct intel_crtc_state *pipe_config)
@@ -12161,9 +12044,10 @@
static int
intel_modeset_pipe_config(struct drm_crtc *crtc,
- struct drm_atomic_state *state,
- struct intel_crtc_state *pipe_config)
+ struct drm_atomic_state *state)
{
+ struct drm_crtc_state *crtc_state;
+ struct intel_crtc_state *pipe_config;
struct intel_encoder *encoder;
struct drm_connector *connector;
struct drm_connector_state *connector_state;
@@ -12181,6 +12065,21 @@
return -EINVAL;
}
+ crtc_state = drm_atomic_get_existing_crtc_state(state, crtc);
+ if (WARN_ON(!crtc_state))
+ return -EINVAL;
+
+ pipe_config = to_intel_crtc_state(crtc_state);
+
+ /*
+ * XXX: Add all connectors to make the crtc state match the encoders.
+ */
+ if (!needs_modeset(&pipe_config->base)) {
+ ret = drm_atomic_add_affected_connectors(state, crtc);
+ if (ret)
+ return ret;
+ }
+
clear_intel_crtc_state(pipe_config);
pipe_config->cpu_transcoder =
@@ -12272,7 +12171,19 @@
DRM_DEBUG_KMS("plane bpp: %i, pipe bpp: %i, dithering: %i\n",
base_bpp, pipe_config->pipe_bpp, pipe_config->dither);
- return 0;
+ /* Check if we need to force a modeset */
+ if (pipe_config->has_audio !=
+ to_intel_crtc_state(crtc->state)->has_audio) {
+ pipe_config->base.mode_changed = true;
+ ret = drm_atomic_add_affected_planes(state, crtc);
+ }
+
+ /*
+ * Note we have an issue here with infoframes: current code
+ * only updates them on the full mode set path per hw
+ * requirements. So here we should be checking for any
+ * required changes and forcing a mode set.
+ */
fail:
return ret;
}
@@ -12289,73 +12200,66 @@
return false;
}
-static bool
-needs_modeset(struct drm_crtc_state *state)
-{
- return state->mode_changed || state->active_changed;
-}
-
static void
intel_modeset_update_state(struct drm_atomic_state *state)
{
struct drm_device *dev = state->dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_encoder *intel_encoder;
struct drm_crtc *crtc;
struct drm_crtc_state *crtc_state;
struct drm_connector *connector;
- int i;
- intel_shared_dpll_commit(dev_priv);
+ intel_shared_dpll_commit(state);
for_each_intel_encoder(dev, intel_encoder) {
if (!intel_encoder->base.crtc)
continue;
- for_each_crtc_in_state(state, crtc, crtc_state, i) {
- if (crtc != intel_encoder->base.crtc)
- continue;
+ crtc = intel_encoder->base.crtc;
+ crtc_state = drm_atomic_get_existing_crtc_state(state, crtc);
+ if (!crtc_state || !needs_modeset(crtc->state))
+ continue;
- if (crtc_state->enable && needs_modeset(crtc_state))
- intel_encoder->connectors_active = false;
-
- break;
- }
+ intel_encoder->connectors_active = false;
}
- drm_atomic_helper_swap_state(state->dev, state);
- intel_modeset_fixup_state(state);
+ drm_atomic_helper_update_legacy_modeset_state(state->dev, state);
+ intel_modeset_update_staged_output_state(state->dev);
/* Double check state. */
for_each_crtc(dev, crtc) {
WARN_ON(crtc->state->enable != intel_crtc_in_use(crtc));
+
+ to_intel_crtc(crtc)->config = to_intel_crtc_state(crtc->state);
+
+ /* Update hwmode for vblank functions */
+ if (crtc->state->active)
+ crtc->hwmode = crtc->state->adjusted_mode;
+ else
+ crtc->hwmode.crtc_clock = 0;
}
list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
if (!connector->encoder || !connector->encoder->crtc)
continue;
- for_each_crtc_in_state(state, crtc, crtc_state, i) {
- if (crtc != connector->encoder->crtc)
- continue;
+ crtc = connector->encoder->crtc;
+ crtc_state = drm_atomic_get_existing_crtc_state(state, crtc);
+ if (!crtc_state || !needs_modeset(crtc->state))
+ continue;
- if (crtc->state->enable && needs_modeset(crtc->state)) {
- struct drm_property *dpms_property =
- dev->mode_config.dpms_property;
+ if (crtc->state->active) {
+ struct drm_property *dpms_property =
+ dev->mode_config.dpms_property;
- connector->dpms = DRM_MODE_DPMS_ON;
- drm_object_property_set_value(&connector->base,
- dpms_property,
- DRM_MODE_DPMS_ON);
+ connector->dpms = DRM_MODE_DPMS_ON;
+ drm_object_property_set_value(&connector->base, dpms_property, DRM_MODE_DPMS_ON);
- intel_encoder = to_intel_encoder(connector->encoder);
- intel_encoder->connectors_active = true;
- }
-
- break;
- }
+ intel_encoder = to_intel_encoder(connector->encoder);
+ intel_encoder->connectors_active = true;
+ } else
+ connector->dpms = DRM_MODE_DPMS_OFF;
}
-
}
static bool intel_fuzzy_clock_check(int clock1, int clock2)
@@ -12759,6 +12663,10 @@
"crtc active state doesn't match with hw state "
"(expected %i, found %i)\n", crtc->active, active);
+ I915_STATE_WARN(crtc->active != crtc->base.state->active,
+ "transitional active state does not match atomic hw state "
+ "(expected %i, found %i)\n", crtc->base.state->active, crtc->active);
+
if (active &&
!intel_pipe_config_compare(dev, crtc->config, &pipe_config)) {
I915_STATE_WARN(1, "pipe state doesn't match!\n");
@@ -12879,60 +12787,7 @@
crtc->scanline_offset = 1;
}
-static struct intel_crtc_state *
-intel_modeset_compute_config(struct drm_crtc *crtc,
- struct drm_atomic_state *state)
-{
- struct intel_crtc_state *pipe_config;
- int ret = 0;
-
- ret = drm_atomic_add_affected_connectors(state, crtc);
- if (ret)
- return ERR_PTR(ret);
-
- ret = drm_atomic_helper_check_modeset(state->dev, state);
- if (ret)
- return ERR_PTR(ret);
-
- /*
- * Note this needs changes when we start tracking multiple modes
- * and crtcs. At that point we'll need to compute the whole config
- * (i.e. one pipe_config for each crtc) rather than just the one
- * for this crtc.
- */
- pipe_config = intel_atomic_get_crtc_state(state, to_intel_crtc(crtc));
- if (IS_ERR(pipe_config))
- return pipe_config;
-
- if (!pipe_config->base.enable)
- return pipe_config;
-
- ret = intel_modeset_pipe_config(crtc, state, pipe_config);
- if (ret)
- return ERR_PTR(ret);
-
- /* Check things that can only be changed through modeset */
- if (pipe_config->has_audio !=
- to_intel_crtc(crtc)->config->has_audio)
- pipe_config->base.mode_changed = true;
-
- /*
- * Note we have an issue here with infoframes: current code
- * only updates them on the full mode set path per hw
- * requirements. So here we should be checking for any
- * required changes and forcing a mode set.
- */
-
- intel_dump_pipe_config(to_intel_crtc(crtc), pipe_config,"[modeset]");
-
- ret = drm_atomic_helper_check_planes(state->dev, state);
- if (ret)
- return ERR_PTR(ret);
-
- return pipe_config;
-}
-
-static int __intel_set_mode_setup_plls(struct drm_atomic_state *state)
+static int intel_modeset_setup_plls(struct drm_atomic_state *state)
{
struct drm_device *dev = state->dev;
struct drm_i915_private *dev_priv = to_i915(dev);
@@ -12957,9 +12812,13 @@
}
}
- ret = intel_shared_dpll_start_config(dev_priv, clear_pipes);
- if (ret)
- goto done;
+ if (clear_pipes) {
+ struct intel_shared_dpll_config *shared_dpll =
+ intel_atomic_get_shared_dpll_state(state);
+
+ for (i = 0; i < dev_priv->num_shared_dpll; i++)
+ shared_dpll[i].crtc_mask &= ~clear_pipes;
+ }
for_each_crtc_in_state(state, crtc, crtc_state, i) {
if (!needs_modeset(crtc_state) || !crtc_state->enable)
@@ -12970,18 +12829,80 @@
ret = dev_priv->display.crtc_compute_clock(intel_crtc,
intel_crtc_state);
- if (ret) {
- intel_shared_dpll_abort_config(dev_priv);
- goto done;
- }
+ if (ret)
+ return ret;
}
-done:
return ret;
}
+/*
+ * This implements the workaround described in the "notes" section of the mode
+ * set sequence documentation. When going from no pipes or single pipe to
+ * multiple pipes, and planes are enabled after the pipe, we need to wait at
+ * least 2 vblanks on the first pipe before enabling planes on the second pipe.
+ */
+static int haswell_mode_set_planes_workaround(struct drm_atomic_state *state)
+{
+ struct drm_crtc_state *crtc_state;
+ struct intel_crtc *intel_crtc;
+ struct drm_crtc *crtc;
+ struct intel_crtc_state *first_crtc_state = NULL;
+ struct intel_crtc_state *other_crtc_state = NULL;
+ enum pipe first_pipe = INVALID_PIPE, enabled_pipe = INVALID_PIPE;
+ int i;
+
+ /* look at all crtc's that are going to be enabled in during modeset */
+ for_each_crtc_in_state(state, crtc, crtc_state, i) {
+ intel_crtc = to_intel_crtc(crtc);
+
+ if (!crtc_state->active || !needs_modeset(crtc_state))
+ continue;
+
+ if (first_crtc_state) {
+ other_crtc_state = to_intel_crtc_state(crtc_state);
+ break;
+ } else {
+ first_crtc_state = to_intel_crtc_state(crtc_state);
+ first_pipe = intel_crtc->pipe;
+ }
+ }
+
+ /* No workaround needed? */
+ if (!first_crtc_state)
+ return 0;
+
+ /* w/a possibly needed, check how many crtc's are already enabled. */
+ for_each_intel_crtc(state->dev, intel_crtc) {
+ struct intel_crtc_state *pipe_config;
+
+ pipe_config = intel_atomic_get_crtc_state(state, intel_crtc);
+ if (IS_ERR(pipe_config))
+ return PTR_ERR(pipe_config);
+
+ pipe_config->hsw_workaround_pipe = INVALID_PIPE;
+
+ if (!pipe_config->base.active ||
+ needs_modeset(&pipe_config->base))
+ continue;
+
+ /* 2 or more enabled crtcs means no need for w/a */
+ if (enabled_pipe != INVALID_PIPE)
+ return 0;
+
+ enabled_pipe = intel_crtc->pipe;
+ }
+
+ if (enabled_pipe != INVALID_PIPE)
+ first_crtc_state->hsw_workaround_pipe = enabled_pipe;
+ else if (other_crtc_state)
+ other_crtc_state->hsw_workaround_pipe = first_pipe;
+
+ return 0;
+}
+
/* Code that should eventually be part of atomic_check() */
-static int __intel_set_mode_checks(struct drm_atomic_state *state)
+static int intel_modeset_checks(struct drm_atomic_state *state)
{
struct drm_device *dev = state->dev;
int ret;
@@ -13003,61 +12924,72 @@
return ret;
}
- ret = __intel_set_mode_setup_plls(state);
+ ret = intel_modeset_setup_plls(state);
if (ret)
return ret;
- return 0;
+ if (IS_HASWELL(dev))
+ ret = haswell_mode_set_planes_workaround(state);
+
+ return ret;
}
-static int __intel_set_mode(struct drm_crtc *modeset_crtc,
- struct intel_crtc_state *pipe_config)
+static int
+intel_modeset_compute_config(struct drm_atomic_state *state)
{
- struct drm_device *dev = modeset_crtc->dev;
+ struct drm_crtc *crtc;
+ struct drm_crtc_state *crtc_state;
+ int ret, i;
+
+ ret = drm_atomic_helper_check_modeset(state->dev, state);
+ if (ret)
+ return ret;
+
+ for_each_crtc_in_state(state, crtc, crtc_state, i) {
+ if (!crtc_state->enable &&
+ WARN_ON(crtc_state->active))
+ crtc_state->active = false;
+
+ if (!crtc_state->enable)
+ continue;
+
+ ret = intel_modeset_pipe_config(crtc, state);
+ if (ret)
+ return ret;
+
+ intel_dump_pipe_config(to_intel_crtc(crtc),
+ to_intel_crtc_state(crtc_state),
+ "[modeset]");
+ }
+
+ ret = intel_modeset_checks(state);
+ if (ret)
+ return ret;
+
+ return drm_atomic_helper_check_planes(state->dev, state);
+}
+
+static int __intel_set_mode(struct drm_atomic_state *state)
+{
+ struct drm_device *dev = state->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
- struct drm_atomic_state *state = pipe_config->base.state;
struct drm_crtc *crtc;
struct drm_crtc_state *crtc_state;
int ret = 0;
int i;
- ret = __intel_set_mode_checks(state);
- if (ret < 0)
- return ret;
-
ret = drm_atomic_helper_prepare_planes(dev, state);
if (ret)
return ret;
+ drm_atomic_helper_swap_state(dev, state);
+
for_each_crtc_in_state(state, crtc, crtc_state, i) {
- if (!needs_modeset(crtc_state))
+ if (!needs_modeset(crtc->state) || !crtc_state->active)
continue;
- if (!crtc_state->enable) {
- intel_crtc_disable(crtc);
- } else if (crtc->state->enable) {
- intel_crtc_disable_planes(crtc);
- dev_priv->display.crtc_disable(crtc);
- }
- }
-
- /* crtc->mode is already used by the ->mode_set callbacks, hence we need
- * to set it here already despite that we pass it down the callchain.
- *
- * Note we'll need to fix this up when we start tracking multiple
- * pipes; here we assume a single modeset_pipe and only track the
- * single crtc and mode.
- */
- if (pipe_config->base.enable && needs_modeset(&pipe_config->base)) {
- modeset_crtc->mode = pipe_config->base.mode;
-
- /*
- * Calculate and store various constants which
- * are later needed by vblank and swap-completion
- * timestamping. They are derived from true hwmode.
- */
- drm_calc_timestamping_constants(modeset_crtc,
- &pipe_config->base.adjusted_mode);
+ intel_crtc_disable_planes(crtc);
+ dev_priv->display.crtc_disable(crtc);
}
/* Only after disabling all output pipelines that will be changed can we
@@ -13069,11 +13001,11 @@
modeset_update_crtc_power_domains(state);
- drm_atomic_helper_commit_planes(dev, state);
-
/* Now enable the clocks, plane, pipe, and connectors that we set up. */
for_each_crtc_in_state(state, crtc, crtc_state, i) {
- if (!needs_modeset(crtc->state) || !crtc->state->enable)
+ drm_atomic_helper_commit_planes_on_crtc(crtc_state);
+
+ if (!needs_modeset(crtc->state) || !crtc->state->active)
continue;
update_scanline_offset(to_intel_crtc(crtc));
@@ -13091,37 +13023,27 @@
return 0;
}
-static int intel_set_mode_with_config(struct drm_crtc *crtc,
- struct intel_crtc_state *pipe_config)
+static int intel_set_mode_checked(struct drm_atomic_state *state)
{
+ struct drm_device *dev = state->dev;
int ret;
- ret = __intel_set_mode(crtc, pipe_config);
-
+ ret = __intel_set_mode(state);
if (ret == 0)
- intel_modeset_check_state(crtc->dev);
+ intel_modeset_check_state(dev);
return ret;
}
-static int intel_set_mode(struct drm_crtc *crtc,
- struct drm_atomic_state *state)
+static int intel_set_mode(struct drm_atomic_state *state)
{
- struct intel_crtc_state *pipe_config;
- int ret = 0;
+ int ret;
- pipe_config = intel_modeset_compute_config(crtc, state);
- if (IS_ERR(pipe_config)) {
- ret = PTR_ERR(pipe_config);
- goto out;
- }
-
- ret = intel_set_mode_with_config(crtc, pipe_config);
+ ret = intel_modeset_compute_config(state);
if (ret)
- goto out;
+ return ret;
-out:
- return ret;
+ return intel_set_mode_checked(state);
}
void intel_crtc_restore_mode(struct drm_crtc *crtc)
@@ -13193,7 +13115,7 @@
intel_modeset_setup_plane_state(state, crtc, &crtc->mode,
crtc->primary->fb, crtc->x, crtc->y);
- ret = intel_set_mode(crtc, state);
+ ret = intel_set_mode(state);
if (ret)
drm_atomic_state_free(state);
}
@@ -13339,20 +13261,10 @@
return 0;
}
-static bool primary_plane_visible(struct drm_crtc *crtc)
-{
- struct intel_plane_state *plane_state =
- to_intel_plane_state(crtc->primary->state);
-
- return plane_state->visible;
-}
-
static int intel_crtc_set_config(struct drm_mode_set *set)
{
struct drm_device *dev;
struct drm_atomic_state *state = NULL;
- struct intel_crtc_state *pipe_config;
- bool primary_plane_was_visible;
int ret;
BUG_ON(!set);
@@ -13383,46 +13295,13 @@
if (ret)
goto out;
- pipe_config = intel_modeset_compute_config(set->crtc, state);
- if (IS_ERR(pipe_config)) {
- ret = PTR_ERR(pipe_config);
+ ret = intel_modeset_compute_config(state);
+ if (ret)
goto out;
- }
intel_update_pipe_size(to_intel_crtc(set->crtc));
- primary_plane_was_visible = primary_plane_visible(set->crtc);
-
- ret = intel_set_mode_with_config(set->crtc, pipe_config);
-
- if (ret == 0 &&
- pipe_config->base.enable &&
- pipe_config->base.planes_changed &&
- !needs_modeset(&pipe_config->base)) {
- struct intel_crtc *intel_crtc = to_intel_crtc(set->crtc);
-
- /*
- * We need to make sure the primary plane is re-enabled if it
- * has previously been turned off.
- */
- if (ret == 0 && !primary_plane_was_visible &&
- primary_plane_visible(set->crtc)) {
- WARN_ON(!intel_crtc->active);
- intel_post_enable_primary(set->crtc);
- }
-
- /*
- * In the fastboot case this may be our only check of the
- * state after boot. It would be better to only do it on
- * the first update, but we don't have a nice way of doing that
- * (and really, set_config isn't used much for high freq page
- * flipping, so increasing its cost here shouldn't be a big
- * deal).
- */
- if (i915.fastboot && ret == 0)
- intel_modeset_check_state(set->crtc->dev);
- }
-
+ ret = intel_set_mode_checked(state);
if (ret) {
DRM_DEBUG_KMS("failed to set mode on [CRTC:%d], err = %d\n",
set->crtc->base.id, ret);
@@ -13755,8 +13634,15 @@
*/
if (IS_BROADWELL(dev))
intel_crtc->atomic.wait_vblank = true;
+
+ if (crtc_state && !needs_modeset(&crtc_state->base))
+ intel_crtc->atomic.post_enable_primary = true;
}
+ if (!state->visible && old_state->visible &&
+ crtc_state && !needs_modeset(&crtc_state->base))
+ intel_crtc->atomic.pre_disable_primary = true;
+
intel_crtc->atomic.fb_bits |=
INTEL_FRONTBUFFER_PRIMARY(intel_crtc->pipe);
@@ -13820,6 +13706,7 @@
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ struct drm_crtc_state *crtc_state = intel_crtc->base.state;
struct intel_plane *intel_plane;
struct drm_plane *p;
unsigned fb_bits = 0;
@@ -13863,7 +13750,7 @@
intel_runtime_pm_get(dev_priv);
/* Perform vblank evasion around commit operation */
- if (intel_crtc->active)
+ if (crtc_state->active && !needs_modeset(crtc_state))
intel_crtc->atomic.evade =
intel_pipe_update_start(intel_crtc,
&intel_crtc->atomic.start_vbl_count);
@@ -13882,7 +13769,7 @@
intel_runtime_pm_put(dev_priv);
- if (intel_crtc->atomic.wait_vblank)
+ if (intel_crtc->atomic.wait_vblank && intel_crtc->active)
intel_wait_for_vblank(dev, intel_crtc->pipe);
intel_frontbuffer_flip(dev, intel_crtc->atomic.fb_bits);
@@ -14748,6 +14635,8 @@
.output_poll_changed = intel_fbdev_output_poll_changed,
.atomic_check = intel_atomic_check,
.atomic_commit = intel_atomic_commit,
+ .atomic_state_alloc = intel_atomic_state_alloc,
+ .atomic_state_clear = intel_atomic_state_clear,
};
/* Set up chip specific display functions */
@@ -14774,7 +14663,6 @@
haswell_crtc_compute_clock;
dev_priv->display.crtc_enable = haswell_crtc_enable;
dev_priv->display.crtc_disable = haswell_crtc_disable;
- dev_priv->display.off = ironlake_crtc_off;
dev_priv->display.update_primary_plane =
skylake_update_primary_plane;
} else if (HAS_DDI(dev)) {
@@ -14785,7 +14673,6 @@
haswell_crtc_compute_clock;
dev_priv->display.crtc_enable = haswell_crtc_enable;
dev_priv->display.crtc_disable = haswell_crtc_disable;
- dev_priv->display.off = ironlake_crtc_off;
dev_priv->display.update_primary_plane =
ironlake_update_primary_plane;
} else if (HAS_PCH_SPLIT(dev)) {
@@ -14796,7 +14683,6 @@
ironlake_crtc_compute_clock;
dev_priv->display.crtc_enable = ironlake_crtc_enable;
dev_priv->display.crtc_disable = ironlake_crtc_disable;
- dev_priv->display.off = ironlake_crtc_off;
dev_priv->display.update_primary_plane =
ironlake_update_primary_plane;
} else if (IS_VALLEYVIEW(dev)) {
@@ -14806,7 +14692,6 @@
dev_priv->display.crtc_compute_clock = i9xx_crtc_compute_clock;
dev_priv->display.crtc_enable = valleyview_crtc_enable;
dev_priv->display.crtc_disable = i9xx_crtc_disable;
- dev_priv->display.off = i9xx_crtc_off;
dev_priv->display.update_primary_plane =
i9xx_update_primary_plane;
} else {
@@ -14816,7 +14701,6 @@
dev_priv->display.crtc_compute_clock = i9xx_crtc_compute_clock;
dev_priv->display.crtc_enable = i9xx_crtc_enable;
dev_priv->display.crtc_disable = i9xx_crtc_disable;
- dev_priv->display.off = i9xx_crtc_off;
dev_priv->display.update_primary_plane =
i9xx_update_primary_plane;
}
@@ -15272,7 +15156,9 @@
{
struct drm_device *dev = crtc->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_encoder *encoder;
u32 reg;
+ bool enable;
/* Clear any frame start delays used for debugging left by the BIOS */
reg = PIPECONF(crtc->config->cpu_transcoder);
@@ -15289,7 +15175,6 @@
* disable the crtc (and hence change the state) if it is wrong. Note
* that gen4+ has a fixed plane -> pipe mapping. */
if (INTEL_INFO(dev)->gen < 4 && !intel_check_plane_mapping(crtc)) {
- struct intel_connector *connector;
bool plane;
DRM_DEBUG_KMS("[CRTC:%d] wrong plane connection detected!\n",
@@ -15301,30 +15186,8 @@
plane = crtc->plane;
to_intel_plane_state(crtc->base.primary->state)->visible = true;
crtc->plane = !plane;
- intel_crtc_disable_planes(&crtc->base);
- dev_priv->display.crtc_disable(&crtc->base);
+ intel_crtc_disable_noatomic(&crtc->base);
crtc->plane = plane;
-
- /* ... and break all links. */
- for_each_intel_connector(dev, connector) {
- if (connector->encoder->base.crtc != &crtc->base)
- continue;
-
- connector->base.dpms = DRM_MODE_DPMS_OFF;
- connector->base.encoder = NULL;
- }
- /* multiple connectors may have the same encoder:
- * handle them and break crtc link separately */
- for_each_intel_connector(dev, connector)
- if (connector->encoder->base.crtc == &crtc->base) {
- connector->encoder->base.crtc = NULL;
- connector->encoder->connectors_active = false;
- }
-
- WARN_ON(crtc->active);
- crtc->base.state->enable = false;
- crtc->base.state->active = false;
- crtc->base.enabled = false;
}
if (dev_priv->quirks & QUIRK_PIPEA_FORCE &&
@@ -15338,13 +15201,18 @@
/* Adjust the state of the output pipe according to whether we
* have active connectors/encoders. */
- intel_crtc_update_dpms(&crtc->base);
+ enable = false;
+ for_each_encoder_on_crtc(dev, &crtc->base, encoder)
+ enable |= encoder->connectors_active;
- if (crtc->active != crtc->base.state->enable) {
- struct intel_encoder *encoder;
+ if (!enable)
+ intel_crtc_disable_noatomic(&crtc->base);
+
+ if (crtc->active != crtc->base.state->active) {
/* This can happen either due to bugs in the get_hw_state
- * functions or because the pipe is force-enabled due to the
+ * functions or because of calls to intel_crtc_disable_noatomic,
+ * or because the pipe is force-enabled due to the
* pipe A quirk. */
DRM_DEBUG_KMS("[CRTC:%d] hw state adjusted, was %s, now %s\n",
crtc->base.base.id,
@@ -15484,6 +15352,7 @@
struct intel_plane_state *plane_state;
memset(crtc->config, 0, sizeof(*crtc->config));
+ crtc->config->base.crtc = &crtc->base;
crtc->config->quirks |= PIPE_CONFIG_QUIRK_INHERITED_MODE;
@@ -15493,6 +15362,7 @@
crtc->base.state->enable = crtc->active;
crtc->base.state->active = crtc->active;
crtc->base.enabled = crtc->active;
+ crtc->base.hwmode = crtc->config->base.adjusted_mode;
plane_state = to_intel_plane_state(primary->state);
plane_state->visible = primary_get_hw_state(crtc);
@@ -15683,7 +15553,9 @@
to_intel_crtc(c)->pipe);
drm_framebuffer_unreference(c->primary->fb);
c->primary->fb = NULL;
+ c->primary->crtc = c->primary->state->crtc = NULL;
update_state_fb(c->primary);
+ c->state->plane_mask &= ~(1 << drm_plane_index(c->primary));
}
}
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 5c9d621..b28029a 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -241,6 +241,13 @@
int p;
} intel_clock_t;
+struct intel_atomic_state {
+ struct drm_atomic_state base;
+
+ bool dpll_set;
+ struct intel_shared_dpll_config shared_dpll[I915_NUM_PLLS];
+};
+
struct intel_plane_state {
struct drm_plane_state base;
struct drm_rect src;
@@ -447,6 +454,9 @@
int pbn;
struct intel_crtc_scaler_state scaler_state;
+
+ /* w/a for waiting 2 vblanks during crtc enable */
+ enum pipe hsw_workaround_pipe;
};
struct intel_pipe_wm {
@@ -628,6 +638,7 @@
unsigned long cursor_hpll_disable;
};
+#define to_intel_atomic_state(x) container_of(x, struct intel_atomic_state, base)
#define to_intel_crtc(x) container_of(x, struct intel_crtc, base)
#define to_intel_crtc_state(x) container_of(x, struct intel_crtc_state, base)
#define to_intel_connector(x) container_of(x, struct intel_connector, base)
@@ -993,8 +1004,8 @@
void intel_mark_busy(struct drm_device *dev);
void intel_mark_idle(struct drm_device *dev);
void intel_crtc_restore_mode(struct drm_crtc *crtc);
-void intel_crtc_control(struct drm_crtc *crtc, bool enable);
-void intel_crtc_reset(struct intel_crtc *crtc);
+void intel_display_suspend(struct drm_device *dev);
+int intel_crtc_control(struct drm_crtc *crtc, bool enable);
void intel_crtc_update_dpms(struct drm_crtc *crtc);
void intel_encoder_destroy(struct drm_encoder *encoder);
int intel_connector_init(struct intel_connector *);
@@ -1083,7 +1094,6 @@
#define assert_shared_dpll_disabled(d, p) assert_shared_dpll(d, p, false)
struct intel_shared_dpll *intel_get_shared_dpll(struct intel_crtc *crtc,
struct intel_crtc_state *state);
-void intel_put_shared_dpll(struct intel_crtc *crtc);
void vlv_force_pll_on(struct drm_device *dev, enum pipe pipe,
const struct dpll *dpll);
@@ -1405,6 +1415,11 @@
struct drm_crtc_state *intel_crtc_duplicate_state(struct drm_crtc *crtc);
void intel_crtc_destroy_state(struct drm_crtc *crtc,
struct drm_crtc_state *state);
+struct drm_atomic_state *intel_atomic_state_alloc(struct drm_device *dev);
+void intel_atomic_state_clear(struct drm_atomic_state *);
+struct intel_shared_dpll_config *
+intel_atomic_get_shared_dpll_state(struct drm_atomic_state *s);
+
static inline struct intel_crtc_state *
intel_atomic_get_crtc_state(struct drm_atomic_state *state,
struct intel_crtc *crtc)