amd64_edac: Cleanup NBCFG handling
The fact whether we are chipkill capable or not does not have any
bearing when computing the channel index on a ganged DCT configuration
so remove that. Also, simplify debug statements. Finally, remove old
error injection leftovers, while at it.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index 9a8a313..dfa7ac7 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -1011,7 +1011,7 @@
syndrome = extract_syndrome(err_info);
/* CHIPKILL enabled */
- if (err_info->nbcfg & K8_NBCFG_CHIPKILL) {
+ if (err_info->nbcfg & NBCFG_CHIPKILL) {
channel = get_channel_from_ecc_syndrome(mci, syndrome);
if (channel < 0) {
/*
@@ -1461,7 +1461,7 @@
* ganged. Otherwise @chan should already contain the channel at
* this point.
*/
- if (dct_ganging_enabled(pvt) && (pvt->nbcfg & K8_NBCFG_CHIPKILL))
+ if (dct_ganging_enabled(pvt))
chan = get_channel_from_ecc_syndrome(mci, syndrome);
if (chan >= 0)
@@ -2050,14 +2050,13 @@
u32 val;
int i, empty = 1;
- amd64_read_pci_cfg(pvt->F3, K8_NBCFG, &val);
+ amd64_read_pci_cfg(pvt->F3, NBCFG, &val);
pvt->nbcfg = val;
- pvt->ctl_error_info.nbcfg = val;
debugf0("node %d, NBCFG=0x%08x[ChipKillEccCap: %d|DramEccEn: %d]\n",
pvt->mc_node_id, val,
- !!(val & K8_NBCFG_CHIPKILL), !!(val & K8_NBCFG_ECC_ENABLE));
+ !!(val & NBCFG_CHIPKILL), !!(val & NBCFG_ECC_ENABLE));
for_each_chip_select(i, 0, pvt) {
csrow = &mci->csrows[i];
@@ -2099,9 +2098,9 @@
/*
* determine whether CHIPKILL or JUST ECC or NO ECC is operating
*/
- if (pvt->nbcfg & K8_NBCFG_ECC_ENABLE)
+ if (pvt->nbcfg & NBCFG_ECC_ENABLE)
csrow->edac_mode =
- (pvt->nbcfg & K8_NBCFG_CHIPKILL) ?
+ (pvt->nbcfg & NBCFG_CHIPKILL) ?
EDAC_S4ECD4ED : EDAC_SECDED;
else
csrow->edac_mode = EDAC_NONE;
@@ -2211,24 +2210,23 @@
value |= mask;
amd64_write_pci_cfg(F3, NBCTL, value);
- amd64_read_pci_cfg(F3, K8_NBCFG, &value);
+ amd64_read_pci_cfg(F3, NBCFG, &value);
- debugf0("1: node %d, NBCFG=0x%08x[ChipKillEccCap: %d|DramEccEn: %d]\n",
- nid, value,
- !!(value & K8_NBCFG_CHIPKILL), !!(value & K8_NBCFG_ECC_ENABLE));
+ debugf0("1: node %d, NBCFG=0x%08x[DramEccEn: %d]\n",
+ nid, value, !!(value & NBCFG_ECC_ENABLE));
- if (!(value & K8_NBCFG_ECC_ENABLE)) {
+ if (!(value & NBCFG_ECC_ENABLE)) {
amd64_warn("DRAM ECC disabled on this node, enabling...\n");
s->flags.nb_ecc_prev = 0;
/* Attempt to turn on DRAM ECC Enable */
- value |= K8_NBCFG_ECC_ENABLE;
- amd64_write_pci_cfg(F3, K8_NBCFG, value);
+ value |= NBCFG_ECC_ENABLE;
+ amd64_write_pci_cfg(F3, NBCFG, value);
- amd64_read_pci_cfg(F3, K8_NBCFG, &value);
+ amd64_read_pci_cfg(F3, NBCFG, &value);
- if (!(value & K8_NBCFG_ECC_ENABLE)) {
+ if (!(value & NBCFG_ECC_ENABLE)) {
amd64_warn("Hardware rejected DRAM ECC enable,"
"check memory DIMM configuration.\n");
ret = false;
@@ -2239,9 +2237,8 @@
s->flags.nb_ecc_prev = 1;
}
- debugf0("2: node %d, NBCFG=0x%08x[ChipKillEccCap: %d|DramEccEn: %d]\n",
- nid, value,
- !!(value & K8_NBCFG_CHIPKILL), !!(value & K8_NBCFG_ECC_ENABLE));
+ debugf0("2: node %d, NBCFG=0x%08x[DramEccEn: %d]\n",
+ nid, value, !!(value & NBCFG_ECC_ENABLE));
return ret;
}
@@ -2263,9 +2260,9 @@
/* restore previous BIOS DRAM ECC "off" setting we force-enabled */
if (!s->flags.nb_ecc_prev) {
- amd64_read_pci_cfg(F3, K8_NBCFG, &value);
- value &= ~K8_NBCFG_ECC_ENABLE;
- amd64_write_pci_cfg(F3, K8_NBCFG, value);
+ amd64_read_pci_cfg(F3, NBCFG, &value);
+ value &= ~NBCFG_ECC_ENABLE;
+ amd64_write_pci_cfg(F3, NBCFG, value);
}
/* restore the NB Enable MCGCTL bit */
@@ -2291,9 +2288,9 @@
u8 ecc_en = 0;
bool nb_mce_en = false;
- amd64_read_pci_cfg(F3, K8_NBCFG, &value);
+ amd64_read_pci_cfg(F3, NBCFG, &value);
- ecc_en = !!(value & K8_NBCFG_ECC_ENABLE);
+ ecc_en = !!(value & NBCFG_ECC_ENABLE);
amd64_info("DRAM ECC %s.\n", (ecc_en ? "enabled" : "disabled"));
nb_mce_en = amd64_nb_mce_bank_enabled_on_node(nid);