net/mlx5: FPGA, Add SBU infrastructure
Add interface to initialize and interact with Innova FPGA SBU
connections.
A client driver may use these functions to set up a high-speed DMA
connection with its SBU hardware logic, and send/receive messages
over this connection.
A later patch in this patchset will make use of these functions for
Innova IPSec offload in mlx5 Ethernet driver.
Add commands to retrieve Innova FPGA SBU capabilities, and to
read/write Innova FPGA configuration space registers and memory,
over internal I2C.
At high level, the FPGA configuration space is divided such:
0x00000000 - 0x007fffff is reserved for the SBU
0x00800000 - 0xffffffff is reserved for the Shell
0x400000000 - ... is DDR memory
A later patchset will add support for accessing FPGA CrSpace and memory
over a high-speed connection. This is the reason for the ACCESS_TYPE
enumeration, which currently only supports I2C.
Signed-off-by: Ilan Tayari <ilant@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
diff --git a/include/linux/mlx5/device.h b/include/linux/mlx5/device.h
index 556e1c3..f31a0b5 100644
--- a/include/linux/mlx5/device.h
+++ b/include/linux/mlx5/device.h
@@ -1103,6 +1103,9 @@ enum mlx5_mcam_feature_groups {
#define MLX5_CAP_FPGA(mdev, cap) \
MLX5_GET(fpga_cap, (mdev)->caps.hca_cur[MLX5_CAP_FPGA], cap)
+#define MLX5_CAP64_FPGA(mdev, cap) \
+ MLX5_GET64(fpga_cap, (mdev)->caps.hca_cur[MLX5_CAP_FPGA], cap)
+
enum {
MLX5_CMD_STAT_OK = 0x0,
MLX5_CMD_STAT_INT_ERR = 0x1,
diff --git a/include/linux/mlx5/driver.h b/include/linux/mlx5/driver.h
index 32b0835..2ab4ae3 100644
--- a/include/linux/mlx5/driver.h
+++ b/include/linux/mlx5/driver.h
@@ -111,6 +111,7 @@ enum {
MLX5_REG_DCBX_APP = 0x4021,
MLX5_REG_FPGA_CAP = 0x4022,
MLX5_REG_FPGA_CTRL = 0x4023,
+ MLX5_REG_FPGA_ACCESS_REG = 0x4024,
MLX5_REG_PCAP = 0x5001,
MLX5_REG_PMTU = 0x5003,
MLX5_REG_PTYS = 0x5004,
diff --git a/include/linux/mlx5/mlx5_ifc.h b/include/linux/mlx5/mlx5_ifc.h
index a8b3fca..c72f973 100644
--- a/include/linux/mlx5/mlx5_ifc.h
+++ b/include/linux/mlx5/mlx5_ifc.h
@@ -8309,6 +8309,7 @@ union mlx5_ifc_ports_control_registers_document_bits {
struct mlx5_ifc_sltp_reg_bits sltp_reg;
struct mlx5_ifc_mtpps_reg_bits mtpps_reg;
struct mlx5_ifc_mtppse_reg_bits mtppse_reg;
+ struct mlx5_ifc_fpga_access_reg_bits fpga_access_reg;
struct mlx5_ifc_fpga_ctrl_bits fpga_ctrl_bits;
struct mlx5_ifc_fpga_cap_bits fpga_cap_bits;
struct mlx5_ifc_mcqi_reg_bits mcqi_reg;
diff --git a/include/linux/mlx5/mlx5_ifc_fpga.h b/include/linux/mlx5/mlx5_ifc_fpga.h
index 0694077..a357665 100644
--- a/include/linux/mlx5/mlx5_ifc_fpga.h
+++ b/include/linux/mlx5/mlx5_ifc_fpga.h
@@ -150,6 +150,19 @@ struct mlx5_ifc_fpga_error_event_bits {
u8 reserved_at_60[0x80];
};
+#define MLX5_FPGA_ACCESS_REG_SIZE_MAX 64
+
+struct mlx5_ifc_fpga_access_reg_bits {
+ u8 reserved_at_0[0x20];
+
+ u8 reserved_at_20[0x10];
+ u8 size[0x10];
+
+ u8 address[0x40];
+
+ u8 data[0][0x8];
+};
+
enum mlx5_ifc_fpga_qp_state {
MLX5_FPGA_QPC_STATE_INIT = 0x0,
MLX5_FPGA_QPC_STATE_ACTIVE = 0x1,