ixgbe: remove vlan_filter_disable and enable functions
Previously these functions handled stripping setup as well, but this has
already been removed from these functions. Rather than encapsulating
this into a function, we can just do the work directly in set_rx_mode.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 7a67a9f..220937ba 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -3768,35 +3768,6 @@
}
/**
- * ixgbe_vlan_filter_disable - helper to disable hw vlan filtering
- * @adapter: driver data
- */
-static void ixgbe_vlan_filter_disable(struct ixgbe_adapter *adapter)
-{
- struct ixgbe_hw *hw = &adapter->hw;
- u32 vlnctrl;
-
- vlnctrl = IXGBE_READ_REG(hw, IXGBE_VLNCTRL);
- vlnctrl &= ~(IXGBE_VLNCTRL_VFE | IXGBE_VLNCTRL_CFIEN);
- IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlnctrl);
-}
-
-/**
- * ixgbe_vlan_filter_enable - helper to enable hw vlan filtering
- * @adapter: driver data
- */
-static void ixgbe_vlan_filter_enable(struct ixgbe_adapter *adapter)
-{
- struct ixgbe_hw *hw = &adapter->hw;
- u32 vlnctrl;
-
- vlnctrl = IXGBE_READ_REG(hw, IXGBE_VLNCTRL);
- vlnctrl |= IXGBE_VLNCTRL_VFE;
- vlnctrl &= ~IXGBE_VLNCTRL_CFIEN;
- IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlnctrl);
-}
-
-/**
* ixgbe_vlan_strip_disable - helper to disable hw vlan stripping
* @adapter: driver data
*/
@@ -3933,11 +3904,13 @@
struct ixgbe_adapter *adapter = netdev_priv(netdev);
struct ixgbe_hw *hw = &adapter->hw;
u32 fctrl, vmolr = IXGBE_VMOLR_BAM | IXGBE_VMOLR_AUPE;
+ u32 vlnctrl;
int count;
/* Check for Promiscuous and All Multicast modes */
fctrl = IXGBE_READ_REG(hw, IXGBE_FCTRL);
+ vlnctrl = IXGBE_READ_REG(hw, IXGBE_VLNCTRL);
/* set all bits that we expect to always be set */
fctrl &= ~IXGBE_FCTRL_SBP; /* disable store-bad-packets */
@@ -3947,7 +3920,7 @@
/* clear the bits we are changing the status of */
fctrl &= ~(IXGBE_FCTRL_UPE | IXGBE_FCTRL_MPE);
-
+ vlnctrl &= ~(IXGBE_VLNCTRL_VFE | IXGBE_VLNCTRL_CFIEN);
if (netdev->flags & IFF_PROMISC) {
hw->addr_ctrl.user_set_promisc = true;
fctrl |= (IXGBE_FCTRL_UPE | IXGBE_FCTRL_MPE);
@@ -3958,15 +3931,13 @@
*/
if (!(adapter->flags & (IXGBE_FLAG_VMDQ_ENABLED |
IXGBE_FLAG_SRIOV_ENABLED)))
- ixgbe_vlan_filter_disable(adapter);
- else
- ixgbe_vlan_filter_enable(adapter);
+ vlnctrl |= (IXGBE_VLNCTRL_VFE | IXGBE_VLNCTRL_CFIEN);
} else {
if (netdev->flags & IFF_ALLMULTI) {
fctrl |= IXGBE_FCTRL_MPE;
vmolr |= IXGBE_VMOLR_MPE;
}
- ixgbe_vlan_filter_enable(adapter);
+ vlnctrl |= IXGBE_VLNCTRL_VFE;
hw->addr_ctrl.user_set_promisc = false;
}
@@ -4010,6 +3981,7 @@
/* NOTE: VLAN filtering is disabled by setting PROMISC */
}
+ IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlnctrl);
IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl);
if (netdev->features & NETIF_F_HW_VLAN_CTAG_RX)