libata: separate out ata_wait_ready() and implement ata_wait_after_reset()
Factor out waiting logic (which is common to all ATA controllers) from
ata_sff_wait_ready() into ata_wait_ready(). ata_wait_ready() takes
@check_ready function pointer and uses it to poll for readiness. This
allows non-SFF controllers to use ata_wait_ready() to wait for link
readiness.
This patch also implements ata_wait_after_reset() - generic version of
ata_sff_wait_after_reset() - using ata_wait_ready().
ata_sff_wait_ready() is reimplemented using ata_wait_ready() and
ata_sff_check_ready(). Functionality remains the same.
Signed-off-by: Tejun Heo <htejun@gmail.com>
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index eaead76..3bad6f1 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -3311,6 +3311,103 @@
}
/**
+ * ata_wait_ready - wait for link to become ready
+ * @link: link to be waited on
+ * @deadline: deadline jiffies for the operation
+ * @check_ready: callback to check link readiness
+ *
+ * Wait for @link to become ready. @check_ready should return
+ * positive number if @link is ready, 0 if it isn't, -ENODEV if
+ * link doesn't seem to be occupied, other errno for other error
+ * conditions.
+ *
+ * Transient -ENODEV conditions are allowed for
+ * ATA_TMOUT_FF_WAIT.
+ *
+ * LOCKING:
+ * EH context.
+ *
+ * RETURNS:
+ * 0 if @linke is ready before @deadline; otherwise, -errno.
+ */
+int ata_wait_ready(struct ata_link *link, unsigned long deadline,
+ int (*check_ready)(struct ata_link *link))
+{
+ unsigned long start = jiffies;
+ unsigned long nodev_deadline = start + ATA_TMOUT_FF_WAIT;
+ int warned = 0;
+
+ if (time_after(nodev_deadline, deadline))
+ nodev_deadline = deadline;
+
+ while (1) {
+ unsigned long now = jiffies;
+ int ready, tmp;
+
+ ready = tmp = check_ready(link);
+ if (ready > 0)
+ return 0;
+
+ /* -ENODEV could be transient. Ignore -ENODEV if link
+ * is online. Also, some SATA devices take a long
+ * time to clear 0xff after reset. For example,
+ * HHD424020F7SV00 iVDR needs >= 800ms while Quantum
+ * GoVault needs even more than that. Wait for
+ * ATA_TMOUT_FF_WAIT on -ENODEV if link isn't offline.
+ *
+ * Note that some PATA controllers (pata_ali) explode
+ * if status register is read more than once when
+ * there's no device attached.
+ */
+ if (ready == -ENODEV) {
+ if (ata_link_online(link))
+ ready = 0;
+ else if ((link->ap->flags & ATA_FLAG_SATA) &&
+ !ata_link_offline(link) &&
+ time_before(now, nodev_deadline))
+ ready = 0;
+ }
+
+ if (ready)
+ return ready;
+ if (time_after(now, deadline))
+ return -EBUSY;
+
+ if (!warned && time_after(now, start + 5 * HZ) &&
+ (deadline - now > 3 * HZ)) {
+ ata_link_printk(link, KERN_WARNING,
+ "link is slow to respond, please be patient "
+ "(ready=%d)\n", tmp);
+ warned = 1;
+ }
+
+ msleep(50);
+ }
+}
+
+/**
+ * ata_wait_after_reset - wait for link to become ready after reset
+ * @link: link to be waited on
+ * @deadline: deadline jiffies for the operation
+ * @check_ready: callback to check link readiness
+ *
+ * Wait for @link to become ready after reset.
+ *
+ * LOCKING:
+ * EH context.
+ *
+ * RETURNS:
+ * 0 if @linke is ready before @deadline; otherwise, -errno.
+ */
+extern int ata_wait_after_reset(struct ata_link *link, unsigned long deadline,
+ int (*check_ready)(struct ata_link *link))
+{
+ msleep(ATA_WAIT_AFTER_RESET_MSECS);
+
+ return ata_wait_ready(link, deadline, check_ready);
+}
+
+/**
* sata_link_debounce - debounce SATA phy status
* @link: ATA link to debounce SATA phy status for
* @params: timing parameters { interval, duratinon, timeout } in msec
@@ -6075,6 +6172,7 @@
EXPORT_SYMBOL_GPL(ata_port_probe);
EXPORT_SYMBOL_GPL(ata_dev_disable);
EXPORT_SYMBOL_GPL(sata_set_spd);
+EXPORT_SYMBOL_GPL(ata_wait_after_reset);
EXPORT_SYMBOL_GPL(sata_link_debounce);
EXPORT_SYMBOL_GPL(sata_link_resume);
EXPORT_SYMBOL_GPL(ata_std_prereset);
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 6e8de3c..78912c5 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -308,6 +308,17 @@
return 0;
}
+static int ata_sff_check_ready(struct ata_link *link)
+{
+ u8 status = link->ap->ops->sff_check_status(link->ap);
+
+ if (!(status & ATA_BUSY))
+ return 1;
+ if (status == 0xff)
+ return -ENODEV;
+ return 0;
+}
+
/**
* ata_sff_wait_ready - sleep until BSY clears, or timeout
* @link: SFF link to wait ready status for
@@ -324,56 +335,7 @@
*/
int ata_sff_wait_ready(struct ata_link *link, unsigned long deadline)
{
- struct ata_port *ap = link->ap;
- unsigned long start = jiffies;
- unsigned long nodev_deadline = start + ATA_TMOUT_FF_WAIT;
- int warned = 0;
-
- if (time_after(nodev_deadline, deadline))
- nodev_deadline = deadline;
-
- while (1) {
- u8 status = ap->ops->sff_check_status(ap);
- unsigned long now = jiffies;
-
- if (!(status & ATA_BUSY))
- return 0;
-
- /* No device status could be transient. Ignore it if
- * link is online. Also, some SATA devices take a
- * long time to clear 0xff after reset. For example,
- * HHD424020F7SV00 iVDR needs >= 800ms while Quantum
- * GoVault needs even more than that. Wait for
- * ATA_TMOUT_FF_WAIT on -ENODEV if link isn't offline.
- *
- * Note that some PATA controllers (pata_ali) explode
- * if status register is read more than once when
- * there's no device attached.
- */
- if (status == 0xff) {
- if (ata_link_online(link))
- status = ATA_BUSY;
- else if ((link->ap->flags & ATA_FLAG_SATA) &&
- !ata_link_offline(link) &&
- time_before(now, nodev_deadline))
- status = ATA_BUSY;
- if (status == 0xff)
- return -ENODEV;
- }
-
- if (time_after(now, deadline))
- return -EBUSY;
-
- if (!warned && time_after(now, start + 5 * HZ) &&
- (deadline - now > 3 * HZ)) {
- ata_link_printk(link, KERN_WARNING,
- "link is slow to respond, please be patient "
- "(Status 0x%x)\n", status);
- warned = 1;
- }
-
- msleep(50);
- }
+ return ata_wait_ready(link, deadline, ata_sff_check_ready);
}
/**
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index 11b5f67..08af43e 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -81,6 +81,8 @@
int dma_dir, struct scatterlist *sg,
unsigned int n_elem, unsigned long timeout);
extern unsigned int ata_do_simple_cmd(struct ata_device *dev, u8 cmd);
+extern int ata_wait_ready(struct ata_link *link, unsigned long deadline,
+ int (*check_ready)(struct ata_link *link));
extern int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class,
unsigned int flags, u16 *id);
extern int ata_dev_reread_id(struct ata_device *dev, unsigned int readid_flags);