usb: dwc3: better name for our request management lists
request_list and req_queued were, well, weird naming
choices.
Let's give those better names and call them,
respectively, pending_list and started_list. These
new names better reflect what these lists are
supposed to do.
While at that also rename req->queued to req->started.
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 5e17c02..4ea4b51 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -444,8 +444,8 @@
/**
* struct dwc3_ep - device side endpoint representation
* @endpoint: usb endpoint
- * @request_list: list of requests for this endpoint
- * @req_queued: list of requests on this ep which have TRBs setup
+ * @pending_list: list of pending requests for this endpoint
+ * @started_list: list of started requests on this endpoint
* @trb_pool: array of transaction buffers
* @trb_pool_dma: dma address of @trb_pool
* @free_slot: next slot which is going to be used
@@ -464,8 +464,8 @@
*/
struct dwc3_ep {
struct usb_ep endpoint;
- struct list_head request_list;
- struct list_head req_queued;
+ struct list_head pending_list;
+ struct list_head started_list;
struct dwc3_trb *trb_pool;
dma_addr_t trb_pool_dma;
@@ -635,7 +635,7 @@
unsigned direction:1;
unsigned mapped:1;
- unsigned queued:1;
+ unsigned started:1;
};
/*
diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
index 4454de0..5e0a21b 100644
--- a/drivers/usb/dwc3/ep0.c
+++ b/drivers/usb/dwc3/ep0.c
@@ -124,7 +124,7 @@
req->request.status = -EINPROGRESS;
req->epnum = dep->number;
- list_add_tail(&req->list, &dep->request_list);
+ list_add_tail(&req->list, &dep->pending_list);
/*
* Gadget driver might not be quick enough to queue a request
@@ -240,7 +240,7 @@
}
/* we share one TRB for ep0/1 */
- if (!list_empty(&dep->request_list)) {
+ if (!list_empty(&dep->pending_list)) {
ret = -EBUSY;
goto out;
}
@@ -272,10 +272,10 @@
dep->flags = DWC3_EP_ENABLED;
dwc->delayed_status = false;
- if (!list_empty(&dep->request_list)) {
+ if (!list_empty(&dep->pending_list)) {
struct dwc3_request *req;
- req = next_request(&dep->request_list);
+ req = next_request(&dep->pending_list);
dwc3_gadget_giveback(dep, req, -ECONNRESET);
}
@@ -806,7 +806,7 @@
trace_dwc3_complete_trb(ep0, trb);
- r = next_request(&ep0->request_list);
+ r = next_request(&ep0->pending_list);
if (!r)
return;
@@ -894,8 +894,8 @@
trace_dwc3_complete_trb(dep, trb);
- if (!list_empty(&dep->request_list)) {
- r = next_request(&dep->request_list);
+ if (!list_empty(&dep->pending_list)) {
+ r = next_request(&dep->pending_list);
dwc3_gadget_giveback(dep, r, 0);
}
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 28d512a..e6bd3a9 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -151,7 +151,7 @@
struct dwc3 *dwc = dep->dwc;
int i;
- if (req->queued) {
+ if (req->started) {
i = 0;
do {
dep->busy_slot++;
@@ -165,7 +165,7 @@
usb_endpoint_xfer_isoc(dep->endpoint.desc))
dep->busy_slot++;
} while(++i < req->request.num_mapped_sgs);
- req->queued = false;
+ req->started = false;
}
list_del(&req->list);
req->trb = NULL;
@@ -522,19 +522,19 @@
{
struct dwc3_request *req;
- if (!list_empty(&dep->req_queued)) {
+ if (!list_empty(&dep->started_list)) {
dwc3_stop_active_transfer(dwc, dep->number, true);
/* - giveback all requests to gadget driver */
- while (!list_empty(&dep->req_queued)) {
- req = next_request(&dep->req_queued);
+ while (!list_empty(&dep->started_list)) {
+ req = next_request(&dep->started_list);
dwc3_gadget_giveback(dep, req, -ESHUTDOWN);
}
}
- while (!list_empty(&dep->request_list)) {
- req = next_request(&dep->request_list);
+ while (!list_empty(&dep->pending_list)) {
+ req = next_request(&dep->pending_list);
dwc3_gadget_giveback(dep, req, -ESHUTDOWN);
}
@@ -700,7 +700,7 @@
trb = &dep->trb_pool[dep->free_slot & DWC3_TRB_MASK];
if (!req->trb) {
- dwc3_gadget_move_request_queued(req);
+ dwc3_gadget_move_started_request(req);
req->trb = trb;
req->trb_dma = dwc3_trb_dma_offset(dep, trb);
req->start_slot = dep->free_slot & DWC3_TRB_MASK;
@@ -824,7 +824,7 @@
if ((trbs_left <= 1) && usb_endpoint_xfer_isoc(dep->endpoint.desc))
return;
- list_for_each_entry_safe(req, n, &dep->request_list, list) {
+ list_for_each_entry_safe(req, n, &dep->pending_list, list) {
unsigned length;
dma_addr_t dma;
last_one = false;
@@ -843,7 +843,7 @@
if (i == (request->num_mapped_sgs - 1) ||
sg_is_last(s)) {
- if (list_empty(&dep->request_list))
+ if (list_empty(&dep->pending_list))
last_one = true;
chain = false;
}
@@ -873,7 +873,7 @@
last_one = 1;
/* Is this the last request? */
- if (list_is_last(&req->list, &dep->request_list))
+ if (list_is_last(&req->list, &dep->pending_list))
last_one = 1;
dwc3_prepare_one_trb(dep, req, dma, length,
@@ -904,18 +904,18 @@
* new requests as we try to set the IOC bit only on the last request.
*/
if (start_new) {
- if (list_empty(&dep->req_queued))
+ if (list_empty(&dep->started_list))
dwc3_prepare_trbs(dep, start_new);
/* req points to the first request which will be sent */
- req = next_request(&dep->req_queued);
+ req = next_request(&dep->started_list);
} else {
dwc3_prepare_trbs(dep, start_new);
/*
* req points to the first request where HWO changed from 0 to 1
*/
- req = next_request(&dep->req_queued);
+ req = next_request(&dep->started_list);
}
if (!req) {
dep->flags |= DWC3_EP_PENDING_REQUEST;
@@ -962,7 +962,7 @@
{
u32 uf;
- if (list_empty(&dep->request_list)) {
+ if (list_empty(&dep->pending_list)) {
dwc3_trace(trace_dwc3_gadget,
"ISOC ep %s run out for requests",
dep->name);
@@ -1030,7 +1030,7 @@
if (ret)
return ret;
- list_add_tail(&req->list, &dep->request_list);
+ list_add_tail(&req->list, &dep->pending_list);
/*
* If there are no pending requests and the endpoint isn't already
@@ -1065,7 +1065,7 @@
* notion of current microframe.
*/
if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
- if (list_empty(&dep->req_queued)) {
+ if (list_empty(&dep->started_list)) {
dwc3_stop_active_transfer(dwc, dep->number, true);
dep->flags = DWC3_EP_ENABLED;
}
@@ -1183,13 +1183,13 @@
spin_lock_irqsave(&dwc->lock, flags);
- list_for_each_entry(r, &dep->request_list, list) {
+ list_for_each_entry(r, &dep->pending_list, list) {
if (r == req)
break;
}
if (r != req) {
- list_for_each_entry(r, &dep->req_queued, list) {
+ list_for_each_entry(r, &dep->started_list, list) {
if (r == req)
break;
}
@@ -1229,8 +1229,8 @@
if (value) {
if (!protocol && ((dep->direction && dep->flags & DWC3_EP_BUSY) ||
- (!list_empty(&dep->req_queued) ||
- !list_empty(&dep->request_list)))) {
+ (!list_empty(&dep->started_list) ||
+ !list_empty(&dep->pending_list)))) {
dwc3_trace(trace_dwc3_gadget,
"%s: pending request, cannot halt\n",
dep->name);
@@ -1731,8 +1731,8 @@
dep->endpoint.caps.dir_in = !!direction;
dep->endpoint.caps.dir_out = !direction;
- INIT_LIST_HEAD(&dep->request_list);
- INIT_LIST_HEAD(&dep->req_queued);
+ INIT_LIST_HEAD(&dep->pending_list);
+ INIT_LIST_HEAD(&dep->started_list);
}
return 0;
@@ -1829,11 +1829,11 @@
* If there are still queued request
* then wait, do not issue either END
* or UPDATE TRANSFER, just attach next
- * request in request_list during
+ * request in pending_list during
* giveback.If any future queued request
* is successfully transferred then we
* will issue UPDATE TRANSFER for all
- * request in the request_list.
+ * request in the pending_list.
*/
dep->flags |= DWC3_EP_MISSED_ISOC;
} else {
@@ -1879,7 +1879,7 @@
int ret;
do {
- req = next_request(&dep->req_queued);
+ req = next_request(&dep->started_list);
if (WARN_ON_ONCE(!req))
return 1;
@@ -1905,8 +1905,8 @@
} while (1);
if (usb_endpoint_xfer_isoc(dep->endpoint.desc) &&
- list_empty(&dep->req_queued)) {
- if (list_empty(&dep->request_list)) {
+ list_empty(&dep->started_list)) {
+ if (list_empty(&dep->pending_list)) {
/*
* If there is no entry in request list then do
* not issue END TRANSFER now. Just set PENDING
@@ -1955,7 +1955,7 @@
if (!(dep->flags & DWC3_EP_ENABLED))
continue;
- if (!list_empty(&dep->req_queued))
+ if (!list_empty(&dep->started_list))
return;
}
diff --git a/drivers/usb/dwc3/gadget.h b/drivers/usb/dwc3/gadget.h
index 18ae3ea..f21c0fc 100644
--- a/drivers/usb/dwc3/gadget.h
+++ b/drivers/usb/dwc3/gadget.h
@@ -68,12 +68,12 @@
return list_first_entry(list, struct dwc3_request, list);
}
-static inline void dwc3_gadget_move_request_queued(struct dwc3_request *req)
+static inline void dwc3_gadget_move_started_request(struct dwc3_request *req)
{
struct dwc3_ep *dep = req->dep;
- req->queued = true;
- list_move_tail(&req->list, &dep->req_queued);
+ req->started = true;
+ list_move_tail(&req->list, &dep->started_list);
}
void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req,