usb: dwc3: gadget: only resume USB2 PHY in <=HIGHSPEED
As a micro-power optimization, let's only resume the
USB2 PHY if we're working on <=HIGHSPEED. If we're
gonna work on SUPERSPEED or SUPERSPEED+, there's no
point in resuming the USB2 PHY.
Fixes: 2b0f11df84bb ("usb: dwc3: gadget: clear SUSPHY bit before ep cmds")
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 378c14c..5e7b2ba 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -258,11 +258,13 @@
* We will also set SUSPHY bit to what it was before returning as stated
* by the same section on Synopsys databook.
*/
- reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
- if (unlikely(reg & DWC3_GUSB2PHYCFG_SUSPHY)) {
- susphy = true;
- reg &= ~DWC3_GUSB2PHYCFG_SUSPHY;
- dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
+ if (dwc->gadget.speed <= USB_SPEED_HIGH) {
+ reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
+ if (unlikely(reg & DWC3_GUSB2PHYCFG_SUSPHY)) {
+ susphy = true;
+ reg &= ~DWC3_GUSB2PHYCFG_SUSPHY;
+ dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
+ }
}
if (cmd == DWC3_DEPCMD_STARTTRANSFER) {