drm/i915: rename VLV IOSF sideband functions logically
Rename all VLV IOSF sideband register accessor functions to
vlv_<port>_{read,write}. No functional changes.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index e07ee4c..2a9d067 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -4245,24 +4245,24 @@
* PLLB opamp always calibrates to max value of 0x3f, force enable it
* and set it to a reasonable value instead.
*/
- reg_val = intel_dpio_read(dev_priv, DPIO_IREF(1));
+ reg_val = vlv_dpio_read(dev_priv, DPIO_IREF(1));
reg_val &= 0xffffff00;
reg_val |= 0x00000030;
- intel_dpio_write(dev_priv, DPIO_IREF(1), reg_val);
+ vlv_dpio_write(dev_priv, DPIO_IREF(1), reg_val);
- reg_val = intel_dpio_read(dev_priv, DPIO_CALIBRATION);
+ reg_val = vlv_dpio_read(dev_priv, DPIO_CALIBRATION);
reg_val &= 0x8cffffff;
reg_val = 0x8c000000;
- intel_dpio_write(dev_priv, DPIO_CALIBRATION, reg_val);
+ vlv_dpio_write(dev_priv, DPIO_CALIBRATION, reg_val);
- reg_val = intel_dpio_read(dev_priv, DPIO_IREF(1));
+ reg_val = vlv_dpio_read(dev_priv, DPIO_IREF(1));
reg_val &= 0xffffff00;
- intel_dpio_write(dev_priv, DPIO_IREF(1), reg_val);
+ vlv_dpio_write(dev_priv, DPIO_IREF(1), reg_val);
- reg_val = intel_dpio_read(dev_priv, DPIO_CALIBRATION);
+ reg_val = vlv_dpio_read(dev_priv, DPIO_CALIBRATION);
reg_val &= 0x00ffffff;
reg_val |= 0xb0000000;
- intel_dpio_write(dev_priv, DPIO_CALIBRATION, reg_val);
+ vlv_dpio_write(dev_priv, DPIO_CALIBRATION, reg_val);
}
static void intel_pch_transcoder_set_m_n(struct intel_crtc *crtc,
@@ -4337,15 +4337,15 @@
vlv_pllb_recal_opamp(dev_priv);
/* Set up Tx target for periodic Rcomp update */
- intel_dpio_write(dev_priv, DPIO_IREF_BCAST, 0x0100000f);
+ vlv_dpio_write(dev_priv, DPIO_IREF_BCAST, 0x0100000f);
/* Disable target IRef on PLL */
- reg_val = intel_dpio_read(dev_priv, DPIO_IREF_CTL(pipe));
+ reg_val = vlv_dpio_read(dev_priv, DPIO_IREF_CTL(pipe));
reg_val &= 0x00ffffff;
- intel_dpio_write(dev_priv, DPIO_IREF_CTL(pipe), reg_val);
+ vlv_dpio_write(dev_priv, DPIO_IREF_CTL(pipe), reg_val);
/* Disable fast lock */
- intel_dpio_write(dev_priv, DPIO_FASTCLK_DISABLE, 0x610);
+ vlv_dpio_write(dev_priv, DPIO_FASTCLK_DISABLE, 0x610);
/* Set idtafcrecal before PLL is enabled */
mdiv = ((bestm1 << DPIO_M1DIV_SHIFT) | (bestm2 & DPIO_M2DIV_MASK));
@@ -4359,47 +4359,47 @@
* Note: don't use the DAC post divider as it seems unstable.
*/
mdiv |= (DPIO_POST_DIV_HDMIDP << DPIO_POST_DIV_SHIFT);
- intel_dpio_write(dev_priv, DPIO_DIV(pipe), mdiv);
+ vlv_dpio_write(dev_priv, DPIO_DIV(pipe), mdiv);
mdiv |= DPIO_ENABLE_CALIBRATION;
- intel_dpio_write(dev_priv, DPIO_DIV(pipe), mdiv);
+ vlv_dpio_write(dev_priv, DPIO_DIV(pipe), mdiv);
/* Set HBR and RBR LPF coefficients */
if (adjusted_mode->clock == 162000 ||
intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_HDMI))
- intel_dpio_write(dev_priv, DPIO_LFP_COEFF(pipe),
+ vlv_dpio_write(dev_priv, DPIO_LFP_COEFF(pipe),
0x005f0021);
else
- intel_dpio_write(dev_priv, DPIO_LFP_COEFF(pipe),
+ vlv_dpio_write(dev_priv, DPIO_LFP_COEFF(pipe),
0x00d0000f);
if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_EDP) ||
intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_DISPLAYPORT)) {
/* Use SSC source */
if (!pipe)
- intel_dpio_write(dev_priv, DPIO_REFSFR(pipe),
+ vlv_dpio_write(dev_priv, DPIO_REFSFR(pipe),
0x0df40000);
else
- intel_dpio_write(dev_priv, DPIO_REFSFR(pipe),
+ vlv_dpio_write(dev_priv, DPIO_REFSFR(pipe),
0x0df70000);
} else { /* HDMI or VGA */
/* Use bend source */
if (!pipe)
- intel_dpio_write(dev_priv, DPIO_REFSFR(pipe),
+ vlv_dpio_write(dev_priv, DPIO_REFSFR(pipe),
0x0df70000);
else
- intel_dpio_write(dev_priv, DPIO_REFSFR(pipe),
+ vlv_dpio_write(dev_priv, DPIO_REFSFR(pipe),
0x0df40000);
}
- coreclk = intel_dpio_read(dev_priv, DPIO_CORE_CLK(pipe));
+ coreclk = vlv_dpio_read(dev_priv, DPIO_CORE_CLK(pipe));
coreclk = (coreclk & 0x0000ff00) | 0x01c00000;
if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_DISPLAYPORT) ||
intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_EDP))
coreclk |= 0x01000000;
- intel_dpio_write(dev_priv, DPIO_CORE_CLK(pipe), coreclk);
+ vlv_dpio_write(dev_priv, DPIO_CORE_CLK(pipe), coreclk);
- intel_dpio_write(dev_priv, DPIO_PLL_CML(pipe), 0x87871000);
+ vlv_dpio_write(dev_priv, DPIO_PLL_CML(pipe), 0x87871000);
for_each_encoder_on_crtc(dev, &crtc->base, encoder)
if (encoder->pre_pll_enable)