mac80211: stop modifying HT SMPS capability
Instead of modifying the HT SMPS capability field
for stations, track the SMPS mode explicitly in a
new field in the station struct and use it in the
drivers that care about it. This simplifies the
code using it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
diff --git a/drivers/net/wireless/iwlegacy/4965-rs.c b/drivers/net/wireless/iwlegacy/4965-rs.c
index f3b8e91..e8324b5 100644
--- a/drivers/net/wireless/iwlegacy/4965-rs.c
+++ b/drivers/net/wireless/iwlegacy/4965-rs.c
@@ -1183,8 +1183,7 @@
if (!conf_is_ht(conf) || !sta->ht_cap.ht_supported)
return -1;
- if (((sta->ht_cap.cap & IEEE80211_HT_CAP_SM_PS) >> 2) ==
- WLAN_HT_CAP_SM_PS_STATIC)
+ if (sta->smps_mode == IEEE80211_SMPS_STATIC)
return -1;
/* Need both Tx chains/antennas to support MIMO */
diff --git a/drivers/net/wireless/iwlegacy/common.c b/drivers/net/wireless/iwlegacy/common.c
index 1f59860..4c9aafb 100644
--- a/drivers/net/wireless/iwlegacy/common.c
+++ b/drivers/net/wireless/iwlegacy/common.c
@@ -1830,32 +1830,30 @@
{
struct ieee80211_sta_ht_cap *sta_ht_inf = &sta->ht_cap;
__le32 sta_flags;
- u8 mimo_ps_mode;
if (!sta || !sta_ht_inf->ht_supported)
goto done;
- mimo_ps_mode = (sta_ht_inf->cap & IEEE80211_HT_CAP_SM_PS) >> 2;
D_ASSOC("spatial multiplexing power save mode: %s\n",
- (mimo_ps_mode == WLAN_HT_CAP_SM_PS_STATIC) ? "static" :
- (mimo_ps_mode == WLAN_HT_CAP_SM_PS_DYNAMIC) ? "dynamic" :
+ (sta->smps_mode == IEEE80211_SMPS_STATIC) ? "static" :
+ (sta->smps_mode == IEEE80211_SMPS_DYNAMIC) ? "dynamic" :
"disabled");
sta_flags = il->stations[idx].sta.station_flags;
sta_flags &= ~(STA_FLG_RTS_MIMO_PROT_MSK | STA_FLG_MIMO_DIS_MSK);
- switch (mimo_ps_mode) {
- case WLAN_HT_CAP_SM_PS_STATIC:
+ switch (sta->smps_mode) {
+ case IEEE80211_SMPS_STATIC:
sta_flags |= STA_FLG_MIMO_DIS_MSK;
break;
- case WLAN_HT_CAP_SM_PS_DYNAMIC:
+ case IEEE80211_SMPS_DYNAMIC:
sta_flags |= STA_FLG_RTS_MIMO_PROT_MSK;
break;
- case WLAN_HT_CAP_SM_PS_DISABLED:
+ case IEEE80211_SMPS_OFF:
break;
default:
- IL_WARN("Invalid MIMO PS mode %d\n", mimo_ps_mode);
+ IL_WARN("Invalid MIMO PS mode %d\n", sta->smps_mode);
break;
}
diff --git a/drivers/net/wireless/iwlwifi/dvm/rs.c b/drivers/net/wireless/iwlwifi/dvm/rs.c
index b25de02..abe3042 100644
--- a/drivers/net/wireless/iwlwifi/dvm/rs.c
+++ b/drivers/net/wireless/iwlwifi/dvm/rs.c
@@ -1289,8 +1289,7 @@
if (!conf_is_ht(conf) || !sta->ht_cap.ht_supported)
return -1;
- if (((sta->ht_cap.cap & IEEE80211_HT_CAP_SM_PS) >> 2)
- == WLAN_HT_CAP_SM_PS_STATIC)
+ if (sta->smps_mode == IEEE80211_SMPS_STATIC)
return -1;
/* Need both Tx chains/antennas to support MIMO */
@@ -1345,8 +1344,7 @@
if (!conf_is_ht(conf) || !sta->ht_cap.ht_supported)
return -1;
- if (((sta->ht_cap.cap & IEEE80211_HT_CAP_SM_PS) >> 2)
- == WLAN_HT_CAP_SM_PS_STATIC)
+ if (sta->smps_mode == IEEE80211_SMPS_STATIC)
return -1;
/* Need both Tx chains/antennas to support MIMO */
diff --git a/drivers/net/wireless/iwlwifi/dvm/sta.c b/drivers/net/wireless/iwlwifi/dvm/sta.c
index 6deab38..d5faf74 100644
--- a/drivers/net/wireless/iwlwifi/dvm/sta.c
+++ b/drivers/net/wireless/iwlwifi/dvm/sta.c
@@ -196,7 +196,6 @@
__le32 *flags, __le32 *mask)
{
struct ieee80211_sta_ht_cap *sta_ht_inf = &sta->ht_cap;
- u8 mimo_ps_mode;
*mask = STA_FLG_RTS_MIMO_PROT_MSK |
STA_FLG_MIMO_DIS_MSK |
@@ -208,26 +207,24 @@
if (!sta || !sta_ht_inf->ht_supported)
return;
- mimo_ps_mode = (sta_ht_inf->cap & IEEE80211_HT_CAP_SM_PS) >> 2;
-
IWL_DEBUG_INFO(priv, "STA %pM SM PS mode: %s\n",
sta->addr,
- (mimo_ps_mode == WLAN_HT_CAP_SM_PS_STATIC) ?
+ (sta->smps_mode == IEEE80211_SMPS_STATIC) ?
"static" :
- (mimo_ps_mode == WLAN_HT_CAP_SM_PS_DYNAMIC) ?
+ (sta->smps_mode == IEEE80211_SMPS_DYNAMIC) ?
"dynamic" : "disabled");
- switch (mimo_ps_mode) {
- case WLAN_HT_CAP_SM_PS_STATIC:
+ switch (sta->smps_mode) {
+ case IEEE80211_SMPS_STATIC:
*flags |= STA_FLG_MIMO_DIS_MSK;
break;
- case WLAN_HT_CAP_SM_PS_DYNAMIC:
+ case IEEE80211_SMPS_DYNAMIC:
*flags |= STA_FLG_RTS_MIMO_PROT_MSK;
break;
- case WLAN_HT_CAP_SM_PS_DISABLED:
+ case IEEE80211_SMPS_OFF:
break;
default:
- IWL_WARN(priv, "Invalid MIMO PS mode %d\n", mimo_ps_mode);
+ IWL_WARN(priv, "Invalid MIMO PS mode %d\n", sta->smps_mode);
break;
}
diff --git a/drivers/net/wireless/iwlwifi/mvm/rs.c b/drivers/net/wireless/iwlwifi/mvm/rs.c
index 8ba36e5..56b636d 100644
--- a/drivers/net/wireless/iwlwifi/mvm/rs.c
+++ b/drivers/net/wireless/iwlwifi/mvm/rs.c
@@ -1229,8 +1229,7 @@
if (!sta->ht_cap.ht_supported)
return -1;
- if (((sta->ht_cap.cap & IEEE80211_HT_CAP_SM_PS) >> 2)
- == WLAN_HT_CAP_SM_PS_STATIC)
+ if (sta->smps_mode == IEEE80211_SMPS_STATIC)
return -1;
/* Need both Tx chains/antennas to support MIMO */
@@ -1282,8 +1281,7 @@
if (!sta->ht_cap.ht_supported)
return -1;
- if (((sta->ht_cap.cap & IEEE80211_HT_CAP_SM_PS) >> 2)
- == WLAN_HT_CAP_SM_PS_STATIC)
+ if (sta->smps_mode == IEEE80211_SMPS_STATIC)
return -1;
/* Need both Tx chains/antennas to support MIMO */
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c
index f35d85a..9503e69 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
@@ -343,10 +343,7 @@
* when using more then one tx stream (>MCS7).
*/
if (sta && txdesc->u.ht.mcs > 7 &&
- ((sta->ht_cap.cap &
- IEEE80211_HT_CAP_SM_PS) >>
- IEEE80211_HT_CAP_SM_PS_SHIFT) ==
- WLAN_HT_CAP_SM_PS_DYNAMIC)
+ sta->smps_mode == IEEE80211_SMPS_DYNAMIC)
__set_bit(ENTRY_TXD_HT_MIMO_PS, &txdesc->flags);
} else {
txdesc->u.ht.mcs = rt2x00_get_rate_mcs(hwrate->mcs);