| /* |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 as published |
| * by the Free Software Foundation. |
| * |
| * Copyright (C) 2013 John Crispin <blogic@openwrt.org> |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/interrupt.h> |
| #include <linux/timer.h> |
| #include <linux/of_gpio.h> |
| #include <linux/clk.h> |
| |
| #include <asm/mach-ralink/ralink_regs.h> |
| |
| #define TIMER_REG_TMRSTAT 0x00 |
| #define TIMER_REG_TMR0LOAD 0x10 |
| #define TIMER_REG_TMR0CTL 0x18 |
| |
| #define TMRSTAT_TMR0INT BIT(0) |
| |
| #define TMR0CTL_ENABLE BIT(7) |
| #define TMR0CTL_MODE_PERIODIC BIT(4) |
| #define TMR0CTL_PRESCALER 1 |
| #define TMR0CTL_PRESCALE_VAL (0xf - TMR0CTL_PRESCALER) |
| #define TMR0CTL_PRESCALE_DIV (65536 / BIT(TMR0CTL_PRESCALER)) |
| |
| struct rt_timer { |
| struct device *dev; |
| void __iomem *membase; |
| int irq; |
| unsigned long timer_freq; |
| unsigned long timer_div; |
| }; |
| |
| static inline void rt_timer_w32(struct rt_timer *rt, u8 reg, u32 val) |
| { |
| __raw_writel(val, rt->membase + reg); |
| } |
| |
| static inline u32 rt_timer_r32(struct rt_timer *rt, u8 reg) |
| { |
| return __raw_readl(rt->membase + reg); |
| } |
| |
| static irqreturn_t rt_timer_irq(int irq, void *_rt) |
| { |
| struct rt_timer *rt = (struct rt_timer *) _rt; |
| |
| rt_timer_w32(rt, TIMER_REG_TMR0LOAD, rt->timer_freq / rt->timer_div); |
| rt_timer_w32(rt, TIMER_REG_TMRSTAT, TMRSTAT_TMR0INT); |
| |
| return IRQ_HANDLED; |
| } |
| |
| |
| static int rt_timer_request(struct rt_timer *rt) |
| { |
| int err = request_irq(rt->irq, rt_timer_irq, 0, |
| dev_name(rt->dev), rt); |
| if (err) { |
| dev_err(rt->dev, "failed to request irq\n"); |
| } else { |
| u32 t = TMR0CTL_MODE_PERIODIC | TMR0CTL_PRESCALE_VAL; |
| rt_timer_w32(rt, TIMER_REG_TMR0CTL, t); |
| } |
| return err; |
| } |
| |
| static void rt_timer_free(struct rt_timer *rt) |
| { |
| free_irq(rt->irq, rt); |
| } |
| |
| static int rt_timer_config(struct rt_timer *rt, unsigned long divisor) |
| { |
| if (rt->timer_freq < divisor) |
| rt->timer_div = rt->timer_freq; |
| else |
| rt->timer_div = divisor; |
| |
| rt_timer_w32(rt, TIMER_REG_TMR0LOAD, rt->timer_freq / rt->timer_div); |
| |
| return 0; |
| } |
| |
| static int rt_timer_enable(struct rt_timer *rt) |
| { |
| u32 t; |
| |
| rt_timer_w32(rt, TIMER_REG_TMR0LOAD, rt->timer_freq / rt->timer_div); |
| |
| t = rt_timer_r32(rt, TIMER_REG_TMR0CTL); |
| t |= TMR0CTL_ENABLE; |
| rt_timer_w32(rt, TIMER_REG_TMR0CTL, t); |
| |
| return 0; |
| } |
| |
| static void rt_timer_disable(struct rt_timer *rt) |
| { |
| u32 t; |
| |
| t = rt_timer_r32(rt, TIMER_REG_TMR0CTL); |
| t &= ~TMR0CTL_ENABLE; |
| rt_timer_w32(rt, TIMER_REG_TMR0CTL, t); |
| } |
| |
| static int rt_timer_probe(struct platform_device *pdev) |
| { |
| struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| struct rt_timer *rt; |
| struct clk *clk; |
| |
| rt = devm_kzalloc(&pdev->dev, sizeof(*rt), GFP_KERNEL); |
| if (!rt) { |
| dev_err(&pdev->dev, "failed to allocate memory\n"); |
| return -ENOMEM; |
| } |
| |
| rt->irq = platform_get_irq(pdev, 0); |
| if (!rt->irq) { |
| dev_err(&pdev->dev, "failed to load irq\n"); |
| return -ENOENT; |
| } |
| |
| rt->membase = devm_ioremap_resource(&pdev->dev, res); |
| if (IS_ERR(rt->membase)) |
| return PTR_ERR(rt->membase); |
| |
| clk = devm_clk_get(&pdev->dev, NULL); |
| if (IS_ERR(clk)) { |
| dev_err(&pdev->dev, "failed get clock rate\n"); |
| return PTR_ERR(clk); |
| } |
| |
| rt->timer_freq = clk_get_rate(clk) / TMR0CTL_PRESCALE_DIV; |
| if (!rt->timer_freq) |
| return -EINVAL; |
| |
| rt->dev = &pdev->dev; |
| platform_set_drvdata(pdev, rt); |
| |
| rt_timer_request(rt); |
| rt_timer_config(rt, 2); |
| rt_timer_enable(rt); |
| |
| dev_info(&pdev->dev, "maximum frequency is %luHz\n", rt->timer_freq); |
| |
| return 0; |
| } |
| |
| static int rt_timer_remove(struct platform_device *pdev) |
| { |
| struct rt_timer *rt = platform_get_drvdata(pdev); |
| |
| rt_timer_disable(rt); |
| rt_timer_free(rt); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id rt_timer_match[] = { |
| { .compatible = "ralink,rt2880-timer" }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, rt_timer_match); |
| |
| static struct platform_driver rt_timer_driver = { |
| .probe = rt_timer_probe, |
| .remove = rt_timer_remove, |
| .driver = { |
| .name = "rt-timer", |
| .owner = THIS_MODULE, |
| .of_match_table = rt_timer_match |
| }, |
| }; |
| |
| module_platform_driver(rt_timer_driver); |
| |
| MODULE_DESCRIPTION("Ralink RT2880 timer"); |
| MODULE_AUTHOR("John Crispin <blogic@openwrt.org"); |
| MODULE_LICENSE("GPL"); |