drivers/ide/pci/it8172.c - kernel/msm-5.4 - Gitiles

 /*
  *
  * BRIEF MODULE DESCRIPTION
  *      IT8172 IDE controller support
  *
  * Copyright 2000 MontaVista Software Inc.
  * Author: MontaVista Software, Inc.
  *              stevel@mvista.com or source@mvista.com
  *
  *  This program is free software; you can redistribute  it and/or modify it
  *  under  the terms of  the GNU General  Public License as published by the
  *  Free Software Foundation;  either version 2 of the  License, or (at your
  *  option) any later version.
  *
  *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
  *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
  *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
  *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
  *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
  *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
  *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
  *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
  *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
  *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  *  You should have received a copy of the  GNU General Public License along
  *  with this program; if not, write  to the Free Software Foundation, Inc.,
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */

 #include <linux/module.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/ioport.h>
 #include <linux/pci.h>
 #include <linux/hdreg.h>
 #include <linux/ide.h>
 #include <linux/delay.h>
 #include <linux/init.h>

 #include <asm/io.h>
 #include <asm/it8172/it8172_int.h>

 /*
  * Prototypes
  */
 static u8 it8172_ratemask (ide_drive_t *drive)
 {
 	return 1;
 }

 static void it8172_tune_drive (ide_drive_t *drive, u8 pio)
 {
 	ide_hwif_t *hwif	= HWIF(drive);
 	struct pci_dev *dev	= hwif->pci_dev;
 	int is_slave		= (&hwif->drives[1] == drive);
 	unsigned long flags;
 	u16 drive_enables;
 	u32 drive_timing;

 	pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
 	spin_lock_irqsave(&ide_lock, flags);
 	pci_read_config_word(dev, 0x40, &drive_enables);
 	pci_read_config_dword(dev, 0x44, &drive_timing);

 	/*
 	 * FIX! The DIOR/DIOW pulse width and recovery times in port 0x44
 	 * are being left at the default values of 8 PCI clocks (242 nsec
 	 * for a 33 MHz clock). These can be safely shortened at higher
 	 * PIO modes. The DIOR/DIOW pulse width and recovery times only
 	 * apply to PIO modes, not to the DMA modes.
 	 */

 	/*
 	 * Enable port 0x44. The IT8172G spec is confused; it calls
 	 * this register the "Slave IDE Timing Register", but in fact,
 	 * it controls timing for both master and slave drives.
 	 */
 	drive_enables |= 0x4000;

 	if (is_slave) {
 		drive_enables &= 0xc006;
 		if (pio > 1)
 			/* enable prefetch and IORDY sample-point */
 			drive_enables |= 0x0060;
 	} else {
 		drive_enables &= 0xc060;
 		if (pio > 1)
 			/* enable prefetch and IORDY sample-point */
 			drive_enables |= 0x0006;
 	}

 	pci_write_config_word(dev, 0x40, drive_enables);
 	spin_unlock_irqrestore(&ide_lock, flags);
 }

 static u8 it8172_dma_2_pio (u8 xfer_rate)
 {
 	switch(xfer_rate) {
 		case XFER_UDMA_5:
 		case XFER_UDMA_4:
 		case XFER_UDMA_3:
 		case XFER_UDMA_2:
 		case XFER_UDMA_1:
 		case XFER_UDMA_0:
 		case XFER_MW_DMA_2:
 		case XFER_PIO_4:
 			return 4;
 		case XFER_MW_DMA_1:
 		case XFER_PIO_3:
 			return 3;
 		case XFER_SW_DMA_2:
 		case XFER_PIO_2:
 			return 2;
 		case XFER_MW_DMA_0:
 		case XFER_SW_DMA_1:
 		case XFER_SW_DMA_0:
 		case XFER_PIO_1:
 		case XFER_PIO_0:
 		case XFER_PIO_SLOW:
 		default:
 			return 0;
 	}
 }

 static int it8172_tune_chipset (ide_drive_t *drive, u8 xferspeed)
 {
 	ide_hwif_t *hwif	= HWIF(drive);
 	struct pci_dev *dev	= hwif->pci_dev;
 	u8 speed	= ide_rate_filter(it8172_ratemask(drive), xferspeed);
 	int a_speed		= 3 << (drive->dn * 4);
 	int u_flag		= 1 << drive->dn;
 	int u_speed		= 0;
 	u8 reg48, reg4a;

 	pci_read_config_byte(dev, 0x48, &reg48);
 	pci_read_config_byte(dev, 0x4a, &reg4a);

     /*
      * Setting the DMA cycle time to 2 or 3 PCI clocks (60 and 91 nsec
      * at 33 MHz PCI clock) seems to cause BadCRC errors during DMA
      * transfers on some drives, even though both numbers meet the minimum
      * ATAPI-4 spec of 73 and 54 nsec for UDMA 1 and 2 respectively.
      * So the faster times are just commented out here. The good news is
      * that the slower cycle time has very little affect on transfer
      * performance.
      */

 	switch(speed) {
 		case XFER_UDMA_4:
 		case XFER_UDMA_2:	//u_speed = 2 << (drive->dn * 4); break;
 		case XFER_UDMA_5:
 		case XFER_UDMA_3:
 		case XFER_UDMA_1:	//u_speed = 1 << (drive->dn * 4); break;
 		case XFER_UDMA_0:	u_speed = 0 << (drive->dn * 4); break;
 		case XFER_MW_DMA_2:
 		case XFER_MW_DMA_1:
 		case XFER_MW_DMA_0:
 		case XFER_SW_DMA_2:	break;
 		case XFER_PIO_4:
 		case XFER_PIO_3:
 		case XFER_PIO_2:
 		case XFER_PIO_0:	break;
 		default:		return -1;
 	}

 	if (speed >= XFER_UDMA_0) {
 		pci_write_config_byte(dev, 0x48, reg48 | u_flag);
 		reg4a &= ~a_speed;
 		pci_write_config_byte(dev, 0x4a, reg4a | u_speed);
 	} else {
 		pci_write_config_byte(dev, 0x48, reg48 & ~u_flag);
 		pci_write_config_byte(dev, 0x4a, reg4a & ~a_speed);
 	}

 	it8172_tune_drive(drive, it8172_dma_2_pio(speed));
 	return (ide_config_drive_speed(drive, speed));
 }

 static int it8172_config_chipset_for_dma (ide_drive_t *drive)
 {
 	u8 speed = ide_dma_speed(drive, it8172_ratemask(drive));

 	if (!(speed)) {
 		u8 tspeed = ide_get_best_pio_mode(drive, 255, 4, NULL);
 		speed = it8172_dma_2_pio(XFER_PIO_0 + tspeed);
 	}

 	(void) it8172_tune_chipset(drive, speed);
 	return ide_dma_enable(drive);
 }

 static int it8172_config_drive_xfer_rate (ide_drive_t *drive)
 {
 	ide_hwif_t *hwif	= HWIF(drive);
 	struct hd_driveid *id	= drive->id;

 	drive->init_speed = 0;

 	if (id && (id->capability & 1) && drive->autodma) {

 		if (ide_use_dma(drive)) {
 			if (it8172_config_chipset_for_dma(drive))
 				return hwif->ide_dma_on(drive);
 		}

 		goto fast_ata_pio;

 	} else if ((id->capability & 8) || (id->field_valid & 2)) {
 fast_ata_pio:
 		it8172_tune_drive(drive, 5);
 		return hwif->ide_dma_off_quietly(drive);
 	}
 	/* IORDY not supported */
 	return 0;
 }

 static unsigned int __devinit init_chipset_it8172 (struct pci_dev *dev, const char *name)
 {
 	unsigned char progif;

 	/*
 	 * Place both IDE interfaces into PCI "native" mode
 	 */
 	pci_read_config_byte(dev, PCI_CLASS_PROG, &progif);
 	pci_write_config_byte(dev, PCI_CLASS_PROG, progif | 0x05);

 	return IT8172_IDE_IRQ;
 }


 static void __devinit init_hwif_it8172 (ide_hwif_t *hwif)
 {
 	struct pci_dev* dev = hwif->pci_dev;
 	unsigned long cmdBase, ctrlBase;

 	hwif->autodma = 0;
 	hwif->tuneproc = &it8172_tune_drive;
 	hwif->speedproc = &it8172_tune_chipset;

 	cmdBase = dev->resource[0].start;
 	ctrlBase = dev->resource[1].start;

 	ide_init_hwif_ports(&hwif->hw, cmdBase, ctrlBase | 2, NULL);
 	memcpy(hwif->io_ports, hwif->hw.io_ports, sizeof(hwif->io_ports));
 	hwif->noprobe = 0;

 	if (!hwif->dma_base) {
 		hwif->drives[0].autotune = 1;
 		hwif->drives[1].autotune = 1;
 		return;
 	}

 	hwif->atapi_dma = 1;
 	hwif->ultra_mask = 0x07;
 	hwif->mwdma_mask = 0x06;
 	hwif->swdma_mask = 0x04;

 	hwif->ide_dma_check = &it8172_config_drive_xfer_rate;
 	if (!noautodma)
 		hwif->autodma = 1;
 	hwif->drives[0].autodma = hwif->autodma;
 	hwif->drives[1].autodma = hwif->autodma;
 }

 static ide_pci_device_t it8172_chipsets[] __devinitdata = {
 	{	/* 0 */
 		.name		= "IT8172G",
 		.init_chipset	= init_chipset_it8172,
 		.init_hwif	= init_hwif_it8172,
 		.channels	= 2,
 		.autodma	= AUTODMA,
 		.enablebits	= {{0x00,0x00,0x00}, {0x40,0x00,0x01}},
 		.bootable	= ON_BOARD,
 	}
 };

 static int __devinit it8172_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
         if ((!(PCI_FUNC(dev->devfn) & 1) ||
             (!((dev->class >> 8) == PCI_CLASS_STORAGE_IDE))))
 		return -ENODEV; /* IT8172 is more than an IDE controller */
 	return ide_setup_pci_device(dev, &it8172_chipsets[id->driver_data]);
 }

 static struct pci_device_id it8172_pci_tbl[] = {
 	{ PCI_VENDOR_ID_ITE, PCI_DEVICE_ID_ITE_IT8172G, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
 	{ 0, },
 };
 MODULE_DEVICE_TABLE(pci, it8172_pci_tbl);

 static struct pci_driver driver = {
 	.name		= "IT8172_IDE",
 	.id_table	= it8172_pci_tbl,
 	.probe		= it8172_init_one,
 };

 static int it8172_ide_init(void)
 {
 	return ide_pci_register_driver(&driver);
 }

 module_init(it8172_ide_init);

 MODULE_AUTHOR("SteveL@mvista.com");
 MODULE_DESCRIPTION("PCI driver module for ITE 8172 IDE");
 MODULE_LICENSE("GPL");
	/*
	*
	* BRIEF MODULE DESCRIPTION
	* IT8172 IDE controller support
	*
	* Copyright 2000 MontaVista Software Inc.
	* Author: MontaVista Software, Inc.
	* stevel@mvista.com or source@mvista.com
	*
	* This program is free software; you can redistribute it and/or modify it
	* under the terms of the GNU General Public License as published by the
	* Free Software Foundation; either version 2 of the License, or (at your
	* option) any later version.
	*
	* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
	* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
	* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
	* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
	* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
	* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
	* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
	* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
	* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
	* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
	*
	* You should have received a copy of the GNU General Public License along
	* with this program; if not, write to the Free Software Foundation, Inc.,
	* 675 Mass Ave, Cambridge, MA 02139, USA.
	*/

	#include <linux/module.h>
	#include <linux/types.h>
	#include <linux/kernel.h>
	#include <linux/ioport.h>
	#include <linux/pci.h>
	#include <linux/hdreg.h>
	#include <linux/ide.h>
	#include <linux/delay.h>
	#include <linux/init.h>

	#include <asm/io.h>
	#include <asm/it8172/it8172_int.h>

	/*
	* Prototypes
	*/
	static u8 it8172_ratemask (ide_drive_t *drive)
	{
	return 1;
	}

	static void it8172_tune_drive (ide_drive_t *drive, u8 pio)
	{
	ide_hwif_t *hwif = HWIF(drive);
	struct pci_dev *dev = hwif->pci_dev;
	int is_slave = (&hwif->drives[1] == drive);
	unsigned long flags;
	u16 drive_enables;
	u32 drive_timing;

	pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
	spin_lock_irqsave(&ide_lock, flags);
	pci_read_config_word(dev, 0x40, &drive_enables);
	pci_read_config_dword(dev, 0x44, &drive_timing);

	/*
	* FIX! The DIOR/DIOW pulse width and recovery times in port 0x44
	* are being left at the default values of 8 PCI clocks (242 nsec
	* for a 33 MHz clock). These can be safely shortened at higher
	* PIO modes. The DIOR/DIOW pulse width and recovery times only
	* apply to PIO modes, not to the DMA modes.
	*/

	/*
	* Enable port 0x44. The IT8172G spec is confused; it calls
	* this register the "Slave IDE Timing Register", but in fact,
	* it controls timing for both master and slave drives.
	*/
	drive_enables \|= 0x4000;

	if (is_slave) {
	drive_enables &= 0xc006;
	if (pio > 1)
	/* enable prefetch and IORDY sample-point */
	drive_enables \|= 0x0060;
	} else {
	drive_enables &= 0xc060;
	if (pio > 1)
	/* enable prefetch and IORDY sample-point */
	drive_enables \|= 0x0006;
	}

	pci_write_config_word(dev, 0x40, drive_enables);
	spin_unlock_irqrestore(&ide_lock, flags);
	}

	static u8 it8172_dma_2_pio (u8 xfer_rate)
	{
	switch(xfer_rate) {
	case XFER_UDMA_5:
	case XFER_UDMA_4:
	case XFER_UDMA_3:
	case XFER_UDMA_2:
	case XFER_UDMA_1:
	case XFER_UDMA_0:
	case XFER_MW_DMA_2:
	case XFER_PIO_4:
	return 4;
	case XFER_MW_DMA_1:
	case XFER_PIO_3:
	return 3;
	case XFER_SW_DMA_2:
	case XFER_PIO_2:
	return 2;
	case XFER_MW_DMA_0:
	case XFER_SW_DMA_1:
	case XFER_SW_DMA_0:
	case XFER_PIO_1:
	case XFER_PIO_0:
	case XFER_PIO_SLOW:
	default:
	return 0;
	}
	}

	static int it8172_tune_chipset (ide_drive_t *drive, u8 xferspeed)
	{
	ide_hwif_t *hwif = HWIF(drive);
	struct pci_dev *dev = hwif->pci_dev;
	u8 speed = ide_rate_filter(it8172_ratemask(drive), xferspeed);
	int a_speed = 3 << (drive->dn * 4);
	int u_flag = 1 << drive->dn;
	int u_speed = 0;
	u8 reg48, reg4a;

	pci_read_config_byte(dev, 0x48, &reg48);
	pci_read_config_byte(dev, 0x4a, &reg4a);

	/*
	* Setting the DMA cycle time to 2 or 3 PCI clocks (60 and 91 nsec
	* at 33 MHz PCI clock) seems to cause BadCRC errors during DMA
	* transfers on some drives, even though both numbers meet the minimum
	* ATAPI-4 spec of 73 and 54 nsec for UDMA 1 and 2 respectively.
	* So the faster times are just commented out here. The good news is
	* that the slower cycle time has very little affect on transfer
	* performance.
	*/

	switch(speed) {
	case XFER_UDMA_4:
	case XFER_UDMA_2: //u_speed = 2 << (drive->dn * 4); break;
	case XFER_UDMA_5:
	case XFER_UDMA_3:
	case XFER_UDMA_1: //u_speed = 1 << (drive->dn * 4); break;
	case XFER_UDMA_0: u_speed = 0 << (drive->dn * 4); break;
	case XFER_MW_DMA_2:
	case XFER_MW_DMA_1:
	case XFER_MW_DMA_0:
	case XFER_SW_DMA_2: break;
	case XFER_PIO_4:
	case XFER_PIO_3:
	case XFER_PIO_2:
	case XFER_PIO_0: break;
	default: return -1;
	}

	if (speed >= XFER_UDMA_0) {
	pci_write_config_byte(dev, 0x48, reg48 \| u_flag);
	reg4a &= ~a_speed;
	pci_write_config_byte(dev, 0x4a, reg4a \| u_speed);
	} else {
	pci_write_config_byte(dev, 0x48, reg48 & ~u_flag);
	pci_write_config_byte(dev, 0x4a, reg4a & ~a_speed);
	}

	it8172_tune_drive(drive, it8172_dma_2_pio(speed));
	return (ide_config_drive_speed(drive, speed));
	}

	static int it8172_config_chipset_for_dma (ide_drive_t *drive)
	{
	u8 speed = ide_dma_speed(drive, it8172_ratemask(drive));

	if (!(speed)) {
	u8 tspeed = ide_get_best_pio_mode(drive, 255, 4, NULL);
	speed = it8172_dma_2_pio(XFER_PIO_0 + tspeed);
	}

	(void) it8172_tune_chipset(drive, speed);
	return ide_dma_enable(drive);
	}

	static int it8172_config_drive_xfer_rate (ide_drive_t *drive)
	{
	ide_hwif_t *hwif = HWIF(drive);
	struct hd_driveid *id = drive->id;

	drive->init_speed = 0;

	if (id && (id->capability & 1) && drive->autodma) {

	if (ide_use_dma(drive)) {
	if (it8172_config_chipset_for_dma(drive))
	return hwif->ide_dma_on(drive);
	}

	goto fast_ata_pio;

	} else if ((id->capability & 8) \|\| (id->field_valid & 2)) {
	fast_ata_pio:
	it8172_tune_drive(drive, 5);
	return hwif->ide_dma_off_quietly(drive);
	}
	/* IORDY not supported */
	return 0;
	}

	static unsigned int __devinit init_chipset_it8172 (struct pci_dev dev, const char name)
	{
	unsigned char progif;

	/*
	* Place both IDE interfaces into PCI "native" mode
	*/
	pci_read_config_byte(dev, PCI_CLASS_PROG, &progif);
	pci_write_config_byte(dev, PCI_CLASS_PROG, progif \| 0x05);

	return IT8172_IDE_IRQ;
	}


	static void __devinit init_hwif_it8172 (ide_hwif_t *hwif)
	{
	struct pci_dev* dev = hwif->pci_dev;
	unsigned long cmdBase, ctrlBase;

	hwif->autodma = 0;
	hwif->tuneproc = &it8172_tune_drive;
	hwif->speedproc = &it8172_tune_chipset;

	cmdBase = dev->resource[0].start;
	ctrlBase = dev->resource[1].start;

	ide_init_hwif_ports(&hwif->hw, cmdBase, ctrlBase \| 2, NULL);
	memcpy(hwif->io_ports, hwif->hw.io_ports, sizeof(hwif->io_ports));
	hwif->noprobe = 0;

	if (!hwif->dma_base) {
	hwif->drives[0].autotune = 1;
	hwif->drives[1].autotune = 1;
	return;
	}

	hwif->atapi_dma = 1;
	hwif->ultra_mask = 0x07;
	hwif->mwdma_mask = 0x06;
	hwif->swdma_mask = 0x04;

	hwif->ide_dma_check = &it8172_config_drive_xfer_rate;
	if (!noautodma)
	hwif->autodma = 1;
	hwif->drives[0].autodma = hwif->autodma;
	hwif->drives[1].autodma = hwif->autodma;
	}

	static ide_pci_device_t it8172_chipsets[] __devinitdata = {
	{ /* 0 */
	.name = "IT8172G",
	.init_chipset = init_chipset_it8172,
	.init_hwif = init_hwif_it8172,
	.channels = 2,
	.autodma = AUTODMA,
	.enablebits = {{0x00,0x00,0x00}, {0x40,0x00,0x01}},
	.bootable = ON_BOARD,
	}
	};

	static int __devinit it8172_init_one(struct pci_dev dev, const struct pci_device_id id)
	{
	if ((!(PCI_FUNC(dev->devfn) & 1) \|\|
	(!((dev->class >> 8) == PCI_CLASS_STORAGE_IDE))))
	return -ENODEV; /* IT8172 is more than an IDE controller */
	return ide_setup_pci_device(dev, &it8172_chipsets[id->driver_data]);
	}

	static struct pci_device_id it8172_pci_tbl[] = {
	{ PCI_VENDOR_ID_ITE, PCI_DEVICE_ID_ITE_IT8172G, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
	{ 0, },
	};
	MODULE_DEVICE_TABLE(pci, it8172_pci_tbl);

	static struct pci_driver driver = {
	.name = "IT8172_IDE",
	.id_table = it8172_pci_tbl,
	.probe = it8172_init_one,
	};

	static int it8172_ide_init(void)
	{
	return ide_pci_register_driver(&driver);
	}

	module_init(it8172_ide_init);

	MODULE_AUTHOR("SteveL@mvista.com");
	MODULE_DESCRIPTION("PCI driver module for ITE 8172 IDE");
	MODULE_LICENSE("GPL");