Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfs
* 'for-linus' of git://oss.sgi.com/xfs/xfs: (52 commits)
fs/xfs: Correct NULL test
xfs: optimize log flushing in xfs_fsync
xfs: only clear the suid bit once in xfs_write
xfs: kill xfs_bawrite
xfs: log changed inodes instead of writing them synchronously
xfs: remove invalid barrier optimization from xfs_fsync
xfs: kill the unused XFS_QMOPT_* flush flags V2
xfs: Use delay write promotion for dquot flushing
xfs: Sort delayed write buffers before dispatch
xfs: Don't issue buffer IO direct from AIL push V2
xfs: Use delayed write for inodes rather than async V2
xfs: Make inode reclaim states explicit
xfs: more reserved blocks fixups
xfs: turn off sign warnings
xfs: don't hold onto reserved blocks on remount,ro
xfs: quota limit statvfs available blocks
xfs: replace KM_LARGE with explicit vmalloc use
xfs: cleanup up xfs_log_force calling conventions
xfs: kill XLOG_VEC_SET_TYPE
xfs: remove duplicate buffer flags
...
diff --git a/Documentation/DocBook/v4l/io.xml b/Documentation/DocBook/v4l/io.xml
index f92f243..e870330 100644
--- a/Documentation/DocBook/v4l/io.xml
+++ b/Documentation/DocBook/v4l/io.xml
@@ -589,7 +589,8 @@
<entry></entry>
<entry>A place holder for future extensions and custom
(driver defined) buffer types
-<constant>V4L2_BUF_TYPE_PRIVATE</constant> and higher.</entry>
+<constant>V4L2_BUF_TYPE_PRIVATE</constant> and higher. Applications
+should set this to 0.</entry>
</row>
</tbody>
</tgroup>
diff --git a/Documentation/DocBook/v4l/vidioc-qbuf.xml b/Documentation/DocBook/v4l/vidioc-qbuf.xml
index 1870817..b843bd7 100644
--- a/Documentation/DocBook/v4l/vidioc-qbuf.xml
+++ b/Documentation/DocBook/v4l/vidioc-qbuf.xml
@@ -54,12 +54,10 @@
driver's incoming queue. The semantics depend on the selected I/O
method.</para>
- <para>To enqueue a <link linkend="mmap">memory mapped</link>
-buffer applications set the <structfield>type</structfield> field of a
-&v4l2-buffer; to the same buffer type as previously &v4l2-format;
-<structfield>type</structfield> and &v4l2-requestbuffers;
-<structfield>type</structfield>, the <structfield>memory</structfield>
-field to <constant>V4L2_MEMORY_MMAP</constant> and the
+ <para>To enqueue a buffer applications set the <structfield>type</structfield>
+field of a &v4l2-buffer; to the same buffer type as was previously used
+with &v4l2-format; <structfield>type</structfield> and &v4l2-requestbuffers;
+<structfield>type</structfield>. Applications must also set the
<structfield>index</structfield> field. Valid index numbers range from
zero to the number of buffers allocated with &VIDIOC-REQBUFS;
(&v4l2-requestbuffers; <structfield>count</structfield>) minus one. The
@@ -70,8 +68,19 @@
<constant>V4L2_BUF_TYPE_VBI_OUTPUT</constant>) applications must also
initialize the <structfield>bytesused</structfield>,
<structfield>field</structfield> and
-<structfield>timestamp</structfield> fields. See <xref
- linkend="buffer" /> for details. When
+<structfield>timestamp</structfield> fields, see <xref
+linkend="buffer" /> for details.
+Applications must also set <structfield>flags</structfield> to 0. If a driver
+supports capturing from specific video inputs and you want to specify a video
+input, then <structfield>flags</structfield> should be set to
+<constant>V4L2_BUF_FLAG_INPUT</constant> and the field
+<structfield>input</structfield> must be initialized to the desired input.
+The <structfield>reserved</structfield> field must be set to 0.
+</para>
+
+ <para>To enqueue a <link linkend="mmap">memory mapped</link>
+buffer applications set the <structfield>memory</structfield>
+field to <constant>V4L2_MEMORY_MMAP</constant>. When
<constant>VIDIOC_QBUF</constant> is called with a pointer to this
structure the driver sets the
<constant>V4L2_BUF_FLAG_MAPPED</constant> and
@@ -81,14 +90,10 @@
&EINVAL;.</para>
<para>To enqueue a <link linkend="userp">user pointer</link>
-buffer applications set the <structfield>type</structfield> field of a
-&v4l2-buffer; to the same buffer type as previously &v4l2-format;
-<structfield>type</structfield> and &v4l2-requestbuffers;
-<structfield>type</structfield>, the <structfield>memory</structfield>
-field to <constant>V4L2_MEMORY_USERPTR</constant> and the
+buffer applications set the <structfield>memory</structfield>
+field to <constant>V4L2_MEMORY_USERPTR</constant>, the
<structfield>m.userptr</structfield> field to the address of the
-buffer and <structfield>length</structfield> to its size. When the
-buffer is intended for output additional fields must be set as above.
+buffer and <structfield>length</structfield> to its size.
When <constant>VIDIOC_QBUF</constant> is called with a pointer to this
structure the driver sets the <constant>V4L2_BUF_FLAG_QUEUED</constant>
flag and clears the <constant>V4L2_BUF_FLAG_MAPPED</constant> and
@@ -96,13 +101,14 @@
<structfield>flags</structfield> field, or it returns an error code.
This ioctl locks the memory pages of the buffer in physical memory,
they cannot be swapped out to disk. Buffers remain locked until
-dequeued, until the &VIDIOC-STREAMOFF; or &VIDIOC-REQBUFS; ioctl are
+dequeued, until the &VIDIOC-STREAMOFF; or &VIDIOC-REQBUFS; ioctl is
called, or until the device is closed.</para>
<para>Applications call the <constant>VIDIOC_DQBUF</constant>
ioctl to dequeue a filled (capturing) or displayed (output) buffer
from the driver's outgoing queue. They just set the
-<structfield>type</structfield> and <structfield>memory</structfield>
+<structfield>type</structfield>, <structfield>memory</structfield>
+and <structfield>reserved</structfield>
fields of a &v4l2-buffer; as above, when <constant>VIDIOC_DQBUF</constant>
is called with a pointer to this structure the driver fills the
remaining fields or returns an error code.</para>
diff --git a/Documentation/DocBook/v4l/vidioc-querybuf.xml b/Documentation/DocBook/v4l/vidioc-querybuf.xml
index d834993..e649805 100644
--- a/Documentation/DocBook/v4l/vidioc-querybuf.xml
+++ b/Documentation/DocBook/v4l/vidioc-querybuf.xml
@@ -54,12 +54,13 @@
&VIDIOC-REQBUFS; ioctl.</para>
<para>Applications set the <structfield>type</structfield> field
- of a &v4l2-buffer; to the same buffer type as previously
+ of a &v4l2-buffer; to the same buffer type as was previously used with
&v4l2-format; <structfield>type</structfield> and &v4l2-requestbuffers;
<structfield>type</structfield>, and the <structfield>index</structfield>
field. Valid index numbers range from zero
to the number of buffers allocated with &VIDIOC-REQBUFS;
(&v4l2-requestbuffers; <structfield>count</structfield>) minus one.
+The <structfield>reserved</structfield> field should to set to 0.
After calling <constant>VIDIOC_QUERYBUF</constant> with a pointer to
this structure drivers return an error code or fill the rest of
the structure.</para>
@@ -68,8 +69,8 @@
<constant>V4L2_BUF_FLAG_MAPPED</constant>,
<constant>V4L2_BUF_FLAG_QUEUED</constant> and
<constant>V4L2_BUF_FLAG_DONE</constant> flags will be valid. The
-<structfield>memory</structfield> field will be set to
-<constant>V4L2_MEMORY_MMAP</constant>, the <structfield>m.offset</structfield>
+<structfield>memory</structfield> field will be set to the current
+I/O method, the <structfield>m.offset</structfield>
contains the offset of the buffer from the start of the device memory,
the <structfield>length</structfield> field its size. The driver may
or may not set the remaining fields and flags, they are meaningless in
diff --git a/Documentation/DocBook/v4l/vidioc-reqbufs.xml b/Documentation/DocBook/v4l/vidioc-reqbufs.xml
index bab3808..1c08163 100644
--- a/Documentation/DocBook/v4l/vidioc-reqbufs.xml
+++ b/Documentation/DocBook/v4l/vidioc-reqbufs.xml
@@ -54,23 +54,23 @@
allocated with this ioctl before they can be mapped into the
application's address space. User buffers are allocated by
applications themselves, and this ioctl is merely used to switch the
-driver into user pointer I/O mode.</para>
+driver into user pointer I/O mode and to setup some internal structures.</para>
- <para>To allocate device buffers applications initialize three
-fields of a <structname>v4l2_requestbuffers</structname> structure.
+ <para>To allocate device buffers applications initialize all
+fields of the <structname>v4l2_requestbuffers</structname> structure.
They set the <structfield>type</structfield> field to the respective
stream or buffer type, the <structfield>count</structfield> field to
-the desired number of buffers, and <structfield>memory</structfield>
-must be set to <constant>V4L2_MEMORY_MMAP</constant>. When the ioctl
-is called with a pointer to this structure the driver attempts to
-allocate the requested number of buffers and stores the actual number
+the desired number of buffers, <structfield>memory</structfield>
+must be set to the requested I/O method and the reserved array
+must be zeroed. When the ioctl
+is called with a pointer to this structure the driver will attempt to allocate
+the requested number of buffers and it stores the actual number
allocated in the <structfield>count</structfield> field. It can be
smaller than the number requested, even zero, when the driver runs out
-of free memory. A larger number is possible when the driver requires
-more buffers to function correctly.<footnote>
- <para>For example video output requires at least two buffers,
+of free memory. A larger number is also possible when the driver requires
+more buffers to function correctly. For example video output requires at least two buffers,
one displayed and one filled by the application.</para>
- </footnote> When memory mapping I/O is not supported the ioctl
+ <para>When the I/O method is not supported the ioctl
returns an &EINVAL;.</para>
<para>Applications can call <constant>VIDIOC_REQBUFS</constant>
@@ -81,14 +81,6 @@
reason why munmap()ping one or even all buffers must imply
streamoff.--></para>
- <para>To negotiate user pointer I/O, applications initialize only
-the <structfield>type</structfield> field and set
-<structfield>memory</structfield> to
-<constant>V4L2_MEMORY_USERPTR</constant>. When the ioctl is called
-with a pointer to this structure the driver prepares for user pointer
-I/O, when this I/O method is not supported the ioctl returns an
-&EINVAL;.</para>
-
<table pgwide="1" frame="none" id="v4l2-requestbuffers">
<title>struct <structname>v4l2_requestbuffers</structname></title>
<tgroup cols="3">
@@ -97,9 +89,7 @@
<row>
<entry>__u32</entry>
<entry><structfield>count</structfield></entry>
- <entry>The number of buffers requested or granted. This
-field is only used when <structfield>memory</structfield> is set to
-<constant>V4L2_MEMORY_MMAP</constant>.</entry>
+ <entry>The number of buffers requested or granted.</entry>
</row>
<row>
<entry>&v4l2-buf-type;</entry>
@@ -120,7 +110,7 @@
<entry><structfield>reserved</structfield>[2]</entry>
<entry>A place holder for future extensions and custom
(driver defined) buffer types <constant>V4L2_BUF_TYPE_PRIVATE</constant> and
-higher.</entry>
+higher. This array should be zeroed by applications.</entry>
</row>
</tbody>
</tgroup>
diff --git a/Documentation/cachetlb.txt b/Documentation/cachetlb.txt
index da42ab4..b231414 100644
--- a/Documentation/cachetlb.txt
+++ b/Documentation/cachetlb.txt
@@ -377,3 +377,27 @@
All the functionality of flush_icache_page can be implemented in
flush_dcache_page and update_mmu_cache. In 2.7 the hope is to
remove this interface completely.
+
+The final category of APIs is for I/O to deliberately aliased address
+ranges inside the kernel. Such aliases are set up by use of the
+vmap/vmalloc API. Since kernel I/O goes via physical pages, the I/O
+subsystem assumes that the user mapping and kernel offset mapping are
+the only aliases. This isn't true for vmap aliases, so anything in
+the kernel trying to do I/O to vmap areas must manually manage
+coherency. It must do this by flushing the vmap range before doing
+I/O and invalidating it after the I/O returns.
+
+ void flush_kernel_vmap_range(void *vaddr, int size)
+ flushes the kernel cache for a given virtual address range in
+ the vmap area. This is to make sure that any data the kernel
+ modified in the vmap range is made visible to the physical
+ page. The design is to make this area safe to perform I/O on.
+ Note that this API does *not* also flush the offset map alias
+ of the area.
+
+ void invalidate_kernel_vmap_range(void *vaddr, int size) invalidates
+ the cache for a given virtual address range in the vmap area
+ which prevents the processor from making the cache stale by
+ speculatively reading data while the I/O was occurring to the
+ physical pages. This is only necessary for data reads into the
+ vmap area.
diff --git a/Documentation/dontdiff b/Documentation/dontdiff
index 3ad6ace..d9bcffd 100644
--- a/Documentation/dontdiff
+++ b/Documentation/dontdiff
@@ -69,7 +69,6 @@
bbootsect
bin2c
binkernel.spec
-binoffset
bootsect
bounds.h
bsetup
diff --git a/Documentation/dvb/get_dvb_firmware b/Documentation/dvb/get_dvb_firmware
index 14b7b5a..239cbdb 100644
--- a/Documentation/dvb/get_dvb_firmware
+++ b/Documentation/dvb/get_dvb_firmware
@@ -26,7 +26,7 @@
"dec3000s", "vp7041", "dibusb", "nxt2002", "nxt2004",
"or51211", "or51132_qam", "or51132_vsb", "bluebird",
"opera1", "cx231xx", "cx18", "cx23885", "pvrusb2", "mpc718",
- "af9015");
+ "af9015", "ngene");
# Check args
syntax() if (scalar(@ARGV) != 1);
@@ -39,7 +39,7 @@
die $@ if $@;
print STDERR <<EOF;
Firmware(s) $outfile extracted successfully.
-Now copy it(they) to either /usr/lib/hotplug/firmware or /lib/firmware
+Now copy it(them) to either /usr/lib/hotplug/firmware or /lib/firmware
(depending on configuration of firmware hotplug).
EOF
exit(0);
@@ -549,6 +549,24 @@
close INFILE;
}
+sub ngene {
+ my $url = "http://www.digitaldevices.de/download/";
+ my $file1 = "ngene_15.fw";
+ my $hash1 = "d798d5a757121174f0dbc5f2833c0c85";
+ my $file2 = "ngene_17.fw";
+ my $hash2 = "26b687136e127b8ac24b81e0eeafc20b";
+
+ checkstandard();
+
+ wgetfile($file1, $url . $file1);
+ verify($file1, $hash1);
+
+ wgetfile($file2, $url . $file2);
+ verify($file2, $hash2);
+
+ "$file1, $file2";
+}
+
# ---------------------------------------------------------------
# Utilities
@@ -667,6 +685,7 @@
sub syntax() {
print STDERR "syntax: get_dvb_firmware <component>\n";
print STDERR "Supported components:\n";
+ @components = sort @components;
for($i=0; $i < scalar(@components); $i++) {
print STDERR "\t" . $components[$i] . "\n";
}
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index e7848a0..3e69c1c 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1948,8 +1948,12 @@
IRQ routing is enabled.
noacpi [X86] Do not use ACPI for IRQ routing
or for PCI scanning.
- use_crs [X86] Use _CRS for PCI resource
- allocation.
+ use_crs [X86] Use PCI host bridge window information
+ from ACPI. On BIOSes from 2008 or later, this
+ is enabled by default. If you need to use this,
+ please report a bug.
+ nocrs [X86] Ignore PCI host bridge windows from ACPI.
+ If you need to use this, please report a bug.
routeirq Do IRQ routing for all PCI devices.
This is normally done in pci_enable_device(),
so this option is a temporary workaround
@@ -1998,6 +2002,14 @@
force Enable ASPM even on devices that claim not to support it.
WARNING: Forcing ASPM on may cause system lockups.
+ pcie_pme= [PCIE,PM] Native PCIe PME signaling options:
+ off Do not use native PCIe PME signaling.
+ force Use native PCIe PME signaling even if the BIOS refuses
+ to allow the kernel to control the relevant PCIe config
+ registers.
+ nomsi Do not use MSI for native PCIe PME signaling (this makes
+ all PCIe root ports use INTx for everything).
+
pcmv= [HW,PCMCIA] BadgePAD 4
pd. [PARIDE]
diff --git a/Documentation/lguest/lguest.c b/Documentation/lguest/lguest.c
index 4220851..3119f5d 100644
--- a/Documentation/lguest/lguest.c
+++ b/Documentation/lguest/lguest.c
@@ -34,7 +34,6 @@
#include <sys/uio.h>
#include <termios.h>
#include <getopt.h>
-#include <zlib.h>
#include <assert.h>
#include <sched.h>
#include <limits.h>
diff --git a/Documentation/scsi/ChangeLog.megaraid_sas b/Documentation/scsi/ChangeLog.megaraid_sas
index 17ffa06..3002356 100644
--- a/Documentation/scsi/ChangeLog.megaraid_sas
+++ b/Documentation/scsi/ChangeLog.megaraid_sas
@@ -1,3 +1,19 @@
+1 Release Date : Thur. Oct 29, 2009 09:12:45 PST 2009 -
+ (emaild-id:megaraidlinux@lsi.com)
+ Bo Yang
+
+2 Current Version : 00.00.04.17.1-rc1
+3 Older Version : 00.00.04.12
+
+1. Add the pad_0 in mfi frame structure to 0 to fix the
+ context value larger than 32bit value issue.
+
+2. Add the logic drive list to the driver. Driver will
+ keep the logic drive list internal after driver load.
+
+3. driver fixed the device update issue after get the AEN
+ PD delete/ADD, LD add/delete from FW.
+
1 Release Date : Tues. July 28, 2009 10:12:45 PST 2009 -
(emaild-id:megaraidlinux@lsi.com)
Bo Yang
diff --git a/Documentation/video4linux/CARDLIST.cx23885 b/Documentation/video4linux/CARDLIST.cx23885
index 7539e8f..16ca030 100644
--- a/Documentation/video4linux/CARDLIST.cx23885
+++ b/Documentation/video4linux/CARDLIST.cx23885
@@ -26,3 +26,4 @@
25 -> Compro VideoMate E800 [1858:e800]
26 -> Hauppauge WinTV-HVR1290 [0070:8551]
27 -> Mygica X8558 PRO DMB-TH [14f1:8578]
+ 28 -> LEADTEK WinFast PxTV1200 [107d:6f22]
diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134
index fce1e7e..b4a7670 100644
--- a/Documentation/video4linux/CARDLIST.saa7134
+++ b/Documentation/video4linux/CARDLIST.saa7134
@@ -174,3 +174,4 @@
173 -> Zolid Hybrid TV Tuner PCI [1131:2004]
174 -> Asus Europa Hybrid OEM [1043:4847]
175 -> Leadtek Winfast DTV1000S [107d:6655]
+176 -> Beholder BeholdTV 505 RDS [0000:5051]
diff --git a/Documentation/video4linux/CARDLIST.tuner b/Documentation/video4linux/CARDLIST.tuner
index e0d298f..9b2e0dd 100644
--- a/Documentation/video4linux/CARDLIST.tuner
+++ b/Documentation/video4linux/CARDLIST.tuner
@@ -81,3 +81,4 @@
tuner=81 - Partsnic (Daewoo) PTI-5NF05
tuner=82 - Philips CU1216L
tuner=83 - NXP TDA18271
+tuner=84 - Sony BTF-Pxn01Z
diff --git a/Documentation/video4linux/README.tlg2300 b/Documentation/video4linux/README.tlg2300
new file mode 100644
index 0000000..416ccb9
--- /dev/null
+++ b/Documentation/video4linux/README.tlg2300
@@ -0,0 +1,47 @@
+tlg2300 release notes
+====================
+
+This is a v4l2/dvb device driver for the tlg2300 chip.
+
+
+current status
+==============
+
+video
+ - support mmap and read().(no overlay)
+
+audio
+ - The driver will register a ALSA card for the audio input.
+
+vbi
+ - Works for almost TV norms.
+
+dvb-t
+ - works for DVB-T
+
+FM
+ - Works for radio.
+
+---------------------------------------------------------------------------
+TESTED APPLICATIONS:
+
+-VLC1.0.4 test the video and dvb. The GUI is friendly to use.
+
+-Mplayer test the video.
+
+-Mplayer test the FM. The mplayer should be compiled with --enable-radio and
+ --enable-radio-capture.
+ The command runs as this(The alsa audio registers to card 1):
+ #mplayer radio://103.7/capture/ -radio adevice=hw=1,0:arate=48000 \
+ -rawaudio rate=48000:channels=2
+
+---------------------------------------------------------------------------
+KNOWN PROBLEMS:
+about preemphasis:
+ You can set the preemphasis for radio by the following command:
+ #v4l2-ctl -d /dev/radio0 --set-ctrl=pre_emphasis_settings=1
+
+ "pre_emphasis_settings=1" means that you select the 50us. If you want
+ to select the 75us, please use "pre_emphasis_settings=2"
+
+
diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt
index 1800a62..181b9e6 100644
--- a/Documentation/video4linux/gspca.txt
+++ b/Documentation/video4linux/gspca.txt
@@ -42,6 +42,7 @@
ov519 041e:4067 Creative Live! Cam Video IM (VF0350)
ov519 041e:4068 Creative Live! VISTA VF0470
spca561 0458:7004 Genius VideoCAM Express V2
+sn9c2028 0458:7005 Genius Smart 300, version 2
sunplus 0458:7006 Genius Dsc 1.3 Smart
zc3xx 0458:7007 Genius VideoCam V2
zc3xx 0458:700c Genius VideoCam V3
@@ -109,6 +110,7 @@
sunplus 04a5:3008 Benq DC 1500
sunplus 04a5:300a Benq DC 3410
spca500 04a5:300c Benq DC 1016
+benq 04a5:3035 Benq DC E300
finepix 04cb:0104 Fujifilm FinePix 4800
finepix 04cb:0109 Fujifilm FinePix A202
finepix 04cb:010b Fujifilm FinePix A203
@@ -142,6 +144,7 @@
spca500 04fc:7333 PalmPixDC85
sunplus 04fc:ffff Pure DigitalDakota
spca501 0506:00df 3Com HomeConnect Lite
+sunplus 052b:1507 Megapixel 5 Pretec DC-1007
sunplus 052b:1513 Megapix V4
sunplus 052b:1803 MegaImage VI
tv8532 0545:808b Veo Stingray
@@ -151,6 +154,7 @@
sunplus 0546:3273 Polaroid PDC2030
ov519 054c:0154 Sonny toy4
ov519 054c:0155 Sonny toy5
+cpia1 0553:0002 CPIA CPiA (version1) based cameras
zc3xx 055f:c005 Mustek Wcam300A
spca500 055f:c200 Mustek Gsmart 300
sunplus 055f:c211 Kowa Bs888e Microcamera
@@ -188,8 +192,7 @@
spca500 06be:0800 Optimedia
sunplus 06d6:0031 Trust 610 LCD PowerC@m Zoom
spca506 06e1:a190 ADS Instant VCD
-ov534 06f8:3002 Hercules Blog Webcam
-ov534 06f8:3003 Hercules Dualpix HD Weblog
+ov534_9 06f8:3003 Hercules Dualpix HD Weblog
sonixj 06f8:3004 Hercules Classic Silver
sonixj 06f8:3008 Hercules Deluxe Optical Glass
pac7302 06f8:3009 Hercules Classic Link
@@ -204,6 +207,7 @@
sunplus 0733:3261 Concord 3045 spca536a
sunplus 0733:3281 Cyberpix S550V
spca506 0734:043b 3DeMon USB Capture aka
+cpia1 0813:0001 QX3 camera
ov519 0813:0002 Dual Mode USB Camera Plus
spca500 084d:0003 D-Link DSC-350
spca500 08ca:0103 Aiptek PocketDV
@@ -225,7 +229,8 @@
sunplus 08ca:2060 Aiptek PocketDV5300
tv8532 0923:010f ICM532 cams
mars 093a:050f Mars-Semi Pc-Camera
-mr97310a 093a:010f Sakar Digital no. 77379
+mr97310a 093a:010e All known CIF cams with this ID
+mr97310a 093a:010f All known VGA cams with this ID
pac207 093a:2460 Qtec Webcam 100
pac207 093a:2461 HP Webcam
pac207 093a:2463 Philips SPC 220 NC
@@ -302,6 +307,7 @@
sonixj 0c45:613c Sonix Pccam168
sonixj 0c45:6143 Sonix Pccam168
sonixj 0c45:6148 Digitus DA-70811/ZSMC USB PC Camera ZS211/Microdia
+sonixj 0c45:614a Frontech E-Ccam (JIL-2225)
sn9c20x 0c45:6240 PC Camera (SN9C201 + MT9M001)
sn9c20x 0c45:6242 PC Camera (SN9C201 + MT9M111)
sn9c20x 0c45:6248 PC Camera (SN9C201 + OV9655)
@@ -324,6 +330,10 @@
sn9c20x 0c45:62b3 PC Camera (SN9C202 + OV9655)
sn9c20x 0c45:62bb PC Camera (SN9C202 + OV7660)
sn9c20x 0c45:62bc PC Camera (SN9C202 + HV7131R)
+sn9c2028 0c45:8001 Wild Planet Digital Spy Camera
+sn9c2028 0c45:8003 Sakar #11199, #6637x, #67480 keychain cams
+sn9c2028 0c45:8008 Mini-Shotz ms-350
+sn9c2028 0c45:800a Vivitar Vivicam 3350B
sunplus 0d64:0303 Sunplus FashionCam DXG
ov519 0e96:c001 TRUST 380 USB2 SPACEC@M
etoms 102c:6151 Qcam Sangha CIF
@@ -341,10 +351,11 @@
t613 17a1:0128 TASCORP JPEG Webcam, NGS Cyclops
vc032x 17ef:4802 Lenovo Vc0323+MI1310_SOC
pac207 2001:f115 D-Link DSB-C120
-sq905c 2770:9050 sq905c
-sq905c 2770:905c DualCamera
-sq905 2770:9120 Argus Digital Camera DC1512
-sq905c 2770:913d sq905c
+sq905c 2770:9050 Disney pix micro (CIF)
+sq905c 2770:9052 Disney pix micro 2 (VGA)
+sq905c 2770:905c All 11 known cameras with this ID
+sq905 2770:9120 All 24 known cameras with this ID
+sq905c 2770:913d All 4 known cameras with this ID
spca500 2899:012c Toptro Industrial
ov519 8020:ef04 ov519
spca508 8086:0110 Intel Easy PC Camera
diff --git a/Documentation/video4linux/v4l2-framework.txt b/Documentation/video4linux/v4l2-framework.txt
index 74d677c..5155700 100644
--- a/Documentation/video4linux/v4l2-framework.txt
+++ b/Documentation/video4linux/v4l2-framework.txt
@@ -599,99 +599,13 @@
video buffer helper functions
-----------------------------
-The v4l2 core API provides a standard method for dealing with video
-buffers. Those methods allow a driver to implement read(), mmap() and
-overlay() on a consistent way.
+The v4l2 core API provides a set of standard methods (called "videobuf")
+for dealing with video buffers. Those methods allow a driver to implement
+read(), mmap() and overlay() in a consistent way. There are currently
+methods for using video buffers on devices that supports DMA with
+scatter/gather method (videobuf-dma-sg), DMA with linear access
+(videobuf-dma-contig), and vmalloced buffers, mostly used on USB drivers
+(videobuf-vmalloc).
-There are currently methods for using video buffers on devices that
-supports DMA with scatter/gather method (videobuf-dma-sg), DMA with
-linear access (videobuf-dma-contig), and vmalloced buffers, mostly
-used on USB drivers (videobuf-vmalloc).
-
-Any driver using videobuf should provide operations (callbacks) for
-four handlers:
-
-ops->buf_setup - calculates the size of the video buffers and avoid they
- to waste more than some maximum limit of RAM;
-ops->buf_prepare - fills the video buffer structs and calls
- videobuf_iolock() to alloc and prepare mmaped memory;
-ops->buf_queue - advices the driver that another buffer were
- requested (by read() or by QBUF);
-ops->buf_release - frees any buffer that were allocated.
-
-In order to use it, the driver need to have a code (generally called at
-interrupt context) that will properly handle the buffer request lists,
-announcing that a new buffer were filled.
-
-The irq handling code should handle the videobuf task lists, in order
-to advice videobuf that a new frame were filled, in order to honor to a
-request. The code is generally like this one:
- if (list_empty(&dma_q->active))
- return;
-
- buf = list_entry(dma_q->active.next, struct vbuffer, vb.queue);
-
- if (!waitqueue_active(&buf->vb.done))
- return;
-
- /* Some logic to handle the buf may be needed here */
-
- list_del(&buf->vb.queue);
- do_gettimeofday(&buf->vb.ts);
- wake_up(&buf->vb.done);
-
-Those are the videobuffer functions used on drivers, implemented on
-videobuf-core:
-
-- Videobuf init functions
- videobuf_queue_sg_init()
- Initializes the videobuf infrastructure. This function should be
- called before any other videobuf function on drivers that uses DMA
- Scatter/Gather buffers.
-
- videobuf_queue_dma_contig_init
- Initializes the videobuf infrastructure. This function should be
- called before any other videobuf function on drivers that need DMA
- contiguous buffers.
-
- videobuf_queue_vmalloc_init()
- Initializes the videobuf infrastructure. This function should be
- called before any other videobuf function on USB (and other drivers)
- that need a vmalloced type of videobuf.
-
-- videobuf_iolock()
- Prepares the videobuf memory for the proper method (read, mmap, overlay).
-
-- videobuf_queue_is_busy()
- Checks if a videobuf is streaming.
-
-- videobuf_queue_cancel()
- Stops video handling.
-
-- videobuf_mmap_free()
- frees mmap buffers.
-
-- videobuf_stop()
- Stops video handling, ends mmap and frees mmap and other buffers.
-
-- V4L2 api functions. Those functions correspond to VIDIOC_foo ioctls:
- videobuf_reqbufs(), videobuf_querybuf(), videobuf_qbuf(),
- videobuf_dqbuf(), videobuf_streamon(), videobuf_streamoff().
-
-- V4L1 api function (corresponds to VIDIOCMBUF ioctl):
- videobuf_cgmbuf()
- This function is used to provide backward compatibility with V4L1
- API.
-
-- Some help functions for read()/poll() operations:
- videobuf_read_stream()
- For continuous stream read()
- videobuf_read_one()
- For snapshot read()
- videobuf_poll_stream()
- polling help function
-
-The better way to understand it is to take a look at vivi driver. One
-of the main reasons for vivi is to be a videobuf usage example. the
-vivi_thread_tick() does the task that the IRQ callback would do on PCI
-drivers (or the irq callback on USB).
+Please see Documentation/video4linux/videobuf for more information on how
+to use the videobuf layer.
diff --git a/Documentation/video4linux/videobuf b/Documentation/video4linux/videobuf
new file mode 100644
index 0000000..17a1f9a
--- /dev/null
+++ b/Documentation/video4linux/videobuf
@@ -0,0 +1,360 @@
+An introduction to the videobuf layer
+Jonathan Corbet <corbet@lwn.net>
+Current as of 2.6.33
+
+The videobuf layer functions as a sort of glue layer between a V4L2 driver
+and user space. It handles the allocation and management of buffers for
+the storage of video frames. There is a set of functions which can be used
+to implement many of the standard POSIX I/O system calls, including read(),
+poll(), and, happily, mmap(). Another set of functions can be used to
+implement the bulk of the V4L2 ioctl() calls related to streaming I/O,
+including buffer allocation, queueing and dequeueing, and streaming
+control. Using videobuf imposes a few design decisions on the driver
+author, but the payback comes in the form of reduced code in the driver and
+a consistent implementation of the V4L2 user-space API.
+
+Buffer types
+
+Not all video devices use the same kind of buffers. In fact, there are (at
+least) three common variations:
+
+ - Buffers which are scattered in both the physical and (kernel) virtual
+ address spaces. (Almost) all user-space buffers are like this, but it
+ makes great sense to allocate kernel-space buffers this way as well when
+ it is possible. Unfortunately, it is not always possible; working with
+ this kind of buffer normally requires hardware which can do
+ scatter/gather DMA operations.
+
+ - Buffers which are physically scattered, but which are virtually
+ contiguous; buffers allocated with vmalloc(), in other words. These
+ buffers are just as hard to use for DMA operations, but they can be
+ useful in situations where DMA is not available but virtually-contiguous
+ buffers are convenient.
+
+ - Buffers which are physically contiguous. Allocation of this kind of
+ buffer can be unreliable on fragmented systems, but simpler DMA
+ controllers cannot deal with anything else.
+
+Videobuf can work with all three types of buffers, but the driver author
+must pick one at the outset and design the driver around that decision.
+
+[It's worth noting that there's a fourth kind of buffer: "overlay" buffers
+which are located within the system's video memory. The overlay
+functionality is considered to be deprecated for most use, but it still
+shows up occasionally in system-on-chip drivers where the performance
+benefits merit the use of this technique. Overlay buffers can be handled
+as a form of scattered buffer, but there are very few implementations in
+the kernel and a description of this technique is currently beyond the
+scope of this document.]
+
+Data structures, callbacks, and initialization
+
+Depending on which type of buffers are being used, the driver should
+include one of the following files:
+
+ <media/videobuf-dma-sg.h> /* Physically scattered */
+ <media/videobuf-vmalloc.h> /* vmalloc() buffers */
+ <media/videobuf-dma-contig.h> /* Physically contiguous */
+
+The driver's data structure describing a V4L2 device should include a
+struct videobuf_queue instance for the management of the buffer queue,
+along with a list_head for the queue of available buffers. There will also
+need to be an interrupt-safe spinlock which is used to protect (at least)
+the queue.
+
+The next step is to write four simple callbacks to help videobuf deal with
+the management of buffers:
+
+ struct videobuf_queue_ops {
+ int (*buf_setup)(struct videobuf_queue *q,
+ unsigned int *count, unsigned int *size);
+ int (*buf_prepare)(struct videobuf_queue *q,
+ struct videobuf_buffer *vb,
+ enum v4l2_field field);
+ void (*buf_queue)(struct videobuf_queue *q,
+ struct videobuf_buffer *vb);
+ void (*buf_release)(struct videobuf_queue *q,
+ struct videobuf_buffer *vb);
+ };
+
+buf_setup() is called early in the I/O process, when streaming is being
+initiated; its purpose is to tell videobuf about the I/O stream. The count
+parameter will be a suggested number of buffers to use; the driver should
+check it for rationality and adjust it if need be. As a practical rule, a
+minimum of two buffers are needed for proper streaming, and there is
+usually a maximum (which cannot exceed 32) which makes sense for each
+device. The size parameter should be set to the expected (maximum) size
+for each frame of data.
+
+Each buffer (in the form of a struct videobuf_buffer pointer) will be
+passed to buf_prepare(), which should set the buffer's size, width, height,
+and field fields properly. If the buffer's state field is
+VIDEOBUF_NEEDS_INIT, the driver should pass it to:
+
+ int videobuf_iolock(struct videobuf_queue* q, struct videobuf_buffer *vb,
+ struct v4l2_framebuffer *fbuf);
+
+Among other things, this call will usually allocate memory for the buffer.
+Finally, the buf_prepare() function should set the buffer's state to
+VIDEOBUF_PREPARED.
+
+When a buffer is queued for I/O, it is passed to buf_queue(), which should
+put it onto the driver's list of available buffers and set its state to
+VIDEOBUF_QUEUED. Note that this function is called with the queue spinlock
+held; if it tries to acquire it as well things will come to a screeching
+halt. Yes, this is the voice of experience. Note also that videobuf may
+wait on the first buffer in the queue; placing other buffers in front of it
+could again gum up the works. So use list_add_tail() to enqueue buffers.
+
+Finally, buf_release() is called when a buffer is no longer intended to be
+used. The driver should ensure that there is no I/O active on the buffer,
+then pass it to the appropriate free routine(s):
+
+ /* Scatter/gather drivers */
+ int videobuf_dma_unmap(struct videobuf_queue *q,
+ struct videobuf_dmabuf *dma);
+ int videobuf_dma_free(struct videobuf_dmabuf *dma);
+
+ /* vmalloc drivers */
+ void videobuf_vmalloc_free (struct videobuf_buffer *buf);
+
+ /* Contiguous drivers */
+ void videobuf_dma_contig_free(struct videobuf_queue *q,
+ struct videobuf_buffer *buf);
+
+One way to ensure that a buffer is no longer under I/O is to pass it to:
+
+ int videobuf_waiton(struct videobuf_buffer *vb, int non_blocking, int intr);
+
+Here, vb is the buffer, non_blocking indicates whether non-blocking I/O
+should be used (it should be zero in the buf_release() case), and intr
+controls whether an interruptible wait is used.
+
+File operations
+
+At this point, much of the work is done; much of the rest is slipping
+videobuf calls into the implementation of the other driver callbacks. The
+first step is in the open() function, which must initialize the
+videobuf queue. The function to use depends on the type of buffer used:
+
+ void videobuf_queue_sg_init(struct videobuf_queue *q,
+ struct videobuf_queue_ops *ops,
+ struct device *dev,
+ spinlock_t *irqlock,
+ enum v4l2_buf_type type,
+ enum v4l2_field field,
+ unsigned int msize,
+ void *priv);
+
+ void videobuf_queue_vmalloc_init(struct videobuf_queue *q,
+ struct videobuf_queue_ops *ops,
+ struct device *dev,
+ spinlock_t *irqlock,
+ enum v4l2_buf_type type,
+ enum v4l2_field field,
+ unsigned int msize,
+ void *priv);
+
+ void videobuf_queue_dma_contig_init(struct videobuf_queue *q,
+ struct videobuf_queue_ops *ops,
+ struct device *dev,
+ spinlock_t *irqlock,
+ enum v4l2_buf_type type,
+ enum v4l2_field field,
+ unsigned int msize,
+ void *priv);
+
+In each case, the parameters are the same: q is the queue structure for the
+device, ops is the set of callbacks as described above, dev is the device
+structure for this video device, irqlock is an interrupt-safe spinlock to
+protect access to the data structures, type is the buffer type used by the
+device (cameras will use V4L2_BUF_TYPE_VIDEO_CAPTURE, for example), field
+describes which field is being captured (often V4L2_FIELD_NONE for
+progressive devices), msize is the size of any containing structure used
+around struct videobuf_buffer, and priv is a private data pointer which
+shows up in the priv_data field of struct videobuf_queue. Note that these
+are void functions which, evidently, are immune to failure.
+
+V4L2 capture drivers can be written to support either of two APIs: the
+read() system call and the rather more complicated streaming mechanism. As
+a general rule, it is necessary to support both to ensure that all
+applications have a chance of working with the device. Videobuf makes it
+easy to do that with the same code. To implement read(), the driver need
+only make a call to one of:
+
+ ssize_t videobuf_read_one(struct videobuf_queue *q,
+ char __user *data, size_t count,
+ loff_t *ppos, int nonblocking);
+
+ ssize_t videobuf_read_stream(struct videobuf_queue *q,
+ char __user *data, size_t count,
+ loff_t *ppos, int vbihack, int nonblocking);
+
+Either one of these functions will read frame data into data, returning the
+amount actually read; the difference is that videobuf_read_one() will only
+read a single frame, while videobuf_read_stream() will read multiple frames
+if they are needed to satisfy the count requested by the application. A
+typical driver read() implementation will start the capture engine, call
+one of the above functions, then stop the engine before returning (though a
+smarter implementation might leave the engine running for a little while in
+anticipation of another read() call happening in the near future).
+
+The poll() function can usually be implemented with a direct call to:
+
+ unsigned int videobuf_poll_stream(struct file *file,
+ struct videobuf_queue *q,
+ poll_table *wait);
+
+Note that the actual wait queue eventually used will be the one associated
+with the first available buffer.
+
+When streaming I/O is done to kernel-space buffers, the driver must support
+the mmap() system call to enable user space to access the data. In many
+V4L2 drivers, the often-complex mmap() implementation simplifies to a
+single call to:
+
+ int videobuf_mmap_mapper(struct videobuf_queue *q,
+ struct vm_area_struct *vma);
+
+Everything else is handled by the videobuf code.
+
+The release() function requires two separate videobuf calls:
+
+ void videobuf_stop(struct videobuf_queue *q);
+ int videobuf_mmap_free(struct videobuf_queue *q);
+
+The call to videobuf_stop() terminates any I/O in progress - though it is
+still up to the driver to stop the capture engine. The call to
+videobuf_mmap_free() will ensure that all buffers have been unmapped; if
+so, they will all be passed to the buf_release() callback. If buffers
+remain mapped, videobuf_mmap_free() returns an error code instead. The
+purpose is clearly to cause the closing of the file descriptor to fail if
+buffers are still mapped, but every driver in the 2.6.32 kernel cheerfully
+ignores its return value.
+
+ioctl() operations
+
+The V4L2 API includes a very long list of driver callbacks to respond to
+the many ioctl() commands made available to user space. A number of these
+- those associated with streaming I/O - turn almost directly into videobuf
+calls. The relevant helper functions are:
+
+ int videobuf_reqbufs(struct videobuf_queue *q,
+ struct v4l2_requestbuffers *req);
+ int videobuf_querybuf(struct videobuf_queue *q, struct v4l2_buffer *b);
+ int videobuf_qbuf(struct videobuf_queue *q, struct v4l2_buffer *b);
+ int videobuf_dqbuf(struct videobuf_queue *q, struct v4l2_buffer *b,
+ int nonblocking);
+ int videobuf_streamon(struct videobuf_queue *q);
+ int videobuf_streamoff(struct videobuf_queue *q);
+ int videobuf_cgmbuf(struct videobuf_queue *q, struct video_mbuf *mbuf,
+ int count);
+
+So, for example, a VIDIOC_REQBUFS call turns into a call to the driver's
+vidioc_reqbufs() callback which, in turn, usually only needs to locate the
+proper struct videobuf_queue pointer and pass it to videobuf_reqbufs().
+These support functions can replace a great deal of buffer management
+boilerplate in a lot of V4L2 drivers.
+
+The vidioc_streamon() and vidioc_streamoff() functions will be a bit more
+complex, of course, since they will also need to deal with starting and
+stopping the capture engine. videobuf_cgmbuf(), called from the driver's
+vidiocgmbuf() function, only exists if the V4L1 compatibility module has
+been selected with CONFIG_VIDEO_V4L1_COMPAT, so its use must be surrounded
+with #ifdef directives.
+
+Buffer allocation
+
+Thus far, we have talked about buffers, but have not looked at how they are
+allocated. The scatter/gather case is the most complex on this front. For
+allocation, the driver can leave buffer allocation entirely up to the
+videobuf layer; in this case, buffers will be allocated as anonymous
+user-space pages and will be very scattered indeed. If the application is
+using user-space buffers, no allocation is needed; the videobuf layer will
+take care of calling get_user_pages() and filling in the scatterlist array.
+
+If the driver needs to do its own memory allocation, it should be done in
+the vidioc_reqbufs() function, *after* calling videobuf_reqbufs(). The
+first step is a call to:
+
+ struct videobuf_dmabuf *videobuf_to_dma(struct videobuf_buffer *buf);
+
+The returned videobuf_dmabuf structure (defined in
+<media/videobuf-dma-sg.h>) includes a couple of relevant fields:
+
+ struct scatterlist *sglist;
+ int sglen;
+
+The driver must allocate an appropriately-sized scatterlist array and
+populate it with pointers to the pieces of the allocated buffer; sglen
+should be set to the length of the array.
+
+Drivers using the vmalloc() method need not (and cannot) concern themselves
+with buffer allocation at all; videobuf will handle those details. The
+same is normally true of contiguous-DMA drivers as well; videobuf will
+allocate the buffers (with dma_alloc_coherent()) when it sees fit. That
+means that these drivers may be trying to do high-order allocations at any
+time, an operation which is not always guaranteed to work. Some drivers
+play tricks by allocating DMA space at system boot time; videobuf does not
+currently play well with those drivers.
+
+As of 2.6.31, contiguous-DMA drivers can work with a user-supplied buffer,
+as long as that buffer is physically contiguous. Normal user-space
+allocations will not meet that criterion, but buffers obtained from other
+kernel drivers, or those contained within huge pages, will work with these
+drivers.
+
+Filling the buffers
+
+The final part of a videobuf implementation has no direct callback - it's
+the portion of the code which actually puts frame data into the buffers,
+usually in response to interrupts from the device. For all types of
+drivers, this process works approximately as follows:
+
+ - Obtain the next available buffer and make sure that somebody is actually
+ waiting for it.
+
+ - Get a pointer to the memory and put video data there.
+
+ - Mark the buffer as done and wake up the process waiting for it.
+
+Step (1) above is done by looking at the driver-managed list_head structure
+- the one which is filled in the buf_queue() callback. Because starting
+the engine and enqueueing buffers are done in separate steps, it's possible
+for the engine to be running without any buffers available - in the
+vmalloc() case especially. So the driver should be prepared for the list
+to be empty. It is equally possible that nobody is yet interested in the
+buffer; the driver should not remove it from the list or fill it until a
+process is waiting on it. That test can be done by examining the buffer's
+done field (a wait_queue_head_t structure) with waitqueue_active().
+
+A buffer's state should be set to VIDEOBUF_ACTIVE before being mapped for
+DMA; that ensures that the videobuf layer will not try to do anything with
+it while the device is transferring data.
+
+For scatter/gather drivers, the needed memory pointers will be found in the
+scatterlist structure described above. Drivers using the vmalloc() method
+can get a memory pointer with:
+
+ void *videobuf_to_vmalloc(struct videobuf_buffer *buf);
+
+For contiguous DMA drivers, the function to use is:
+
+ dma_addr_t videobuf_to_dma_contig(struct videobuf_buffer *buf);
+
+The contiguous DMA API goes out of its way to hide the kernel-space address
+of the DMA buffer from drivers.
+
+The final step is to set the size field of the relevant videobuf_buffer
+structure to the actual size of the captured image, set state to
+VIDEOBUF_DONE, then call wake_up() on the done queue. At this point, the
+buffer is owned by the videobuf layer and the driver should not touch it
+again.
+
+Developers who are interested in more information can go into the relevant
+header files; there are a few low-level functions declared there which have
+not been talked about here. Also worthwhile is the vivi driver
+(drivers/media/video/vivi.c), which is maintained as an example of how V4L2
+drivers should be written. Vivi only uses the vmalloc() API, but it's good
+enough to get started with. Note also that all of these calls are exported
+GPL-only, so they will not be available to non-GPL kernel modules.
diff --git a/MAINTAINERS b/MAINTAINERS
index 2533fc4..a0491af 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2141,6 +2141,17 @@
F: Documentation/fault-injection/
F: lib/fault-inject.c
+FCOE SUBSYSTEM (libfc, libfcoe, fcoe)
+M: Robert Love <robert.w.love@intel.com>
+L: devel@open-fcoe.org
+W: www.Open-FCoE.org
+S: Supported
+F: drivers/scsi/libfc/
+F: drivers/scsi/fcoe/
+F: include/scsi/fc/
+F: include/scsi/libfc.h
+F: include/scsi/libfcoe.h
+
FILE LOCKING (flock() and fcntl()/lockf())
M: Matthew Wilcox <matthew@wil.cx>
L: linux-fsdevel@vger.kernel.org
@@ -2393,6 +2404,18 @@
S: Odd Fixes
F: drivers/char/hvc_*
+VIRTIO CONSOLE DRIVER
+M: Amit Shah <amit.shah@redhat.com>
+L: virtualization@lists.linux-foundation.org
+S: Maintained
+F: drivers/char/virtio_console.c
+
+iSCSI BOOT FIRMWARE TABLE (iBFT) DRIVER
+M: Peter Jones <pjones@redhat.com>
+M: Konrad Rzeszutek Wilk <konrad@kernel.org>
+S: Maintained
+F: drivers/firmware/iscsi_ibft*
+
GSPCA FINEPIX SUBDRIVER
M: Frank Zago <frank@zago.net>
L: linux-media@vger.kernel.org
@@ -4676,6 +4699,13 @@
F: drivers/media/video/*7146*
F: include/media/*7146*
+TLG2300 VIDEO4LINUX-2 DRIVER
+M: Huang Shijie <shijie8@gmail.com>
+M: Kang Yong <kangyong@telegent.com>
+M: Zhang Xiaobing <xbzhang@telegent.com>
+S: Supported
+F: drivers/media/video/tlg2300
+
SC1200 WDT DRIVER
M: Zwane Mwaikambo <zwane@arm.linux.org.uk>
S: Maintained
diff --git a/arch/alpha/kernel/pci.c b/arch/alpha/kernel/pci.c
index a91ba28..c9ab94e 100644
--- a/arch/alpha/kernel/pci.c
+++ b/arch/alpha/kernel/pci.c
@@ -126,8 +126,8 @@
#define MB (1024*KB)
#define GB (1024*MB)
-void
-pcibios_align_resource(void *data, struct resource *res,
+resource_size_t
+pcibios_align_resource(void *data, const struct resource *res,
resource_size_t size, resource_size_t align)
{
struct pci_dev *dev = data;
@@ -184,7 +184,7 @@
}
}
- res->start = start;
+ return start;
}
#undef KB
#undef MB
diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h
index 8113bb5..5fe4a2a 100644
--- a/arch/arm/include/asm/cacheflush.h
+++ b/arch/arm/include/asm/cacheflush.h
@@ -447,6 +447,16 @@
: "r" (0));
#endif
}
+static inline void flush_kernel_vmap_range(void *addr, int size)
+{
+ if ((cache_is_vivt() || cache_is_vipt_aliasing()))
+ __cpuc_flush_dcache_area(addr, (size_t)size);
+}
+static inline void invalidate_kernel_vmap_range(void *addr, int size)
+{
+ if ((cache_is_vivt() || cache_is_vipt_aliasing()))
+ __cpuc_flush_dcache_area(addr, (size_t)size);
+}
#define ARCH_HAS_FLUSH_ANON_PAGE
static inline void flush_anon_page(struct vm_area_struct *vma,
diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c
index 8096819..bd397e0 100644
--- a/arch/arm/kernel/bios32.c
+++ b/arch/arm/kernel/bios32.c
@@ -616,15 +616,17 @@
* but we want to try to avoid allocating at 0x2900-0x2bff
* which might be mirrored at 0x0100-0x03ff..
*/
-void pcibios_align_resource(void *data, struct resource *res,
- resource_size_t size, resource_size_t align)
+resource_size_t pcibios_align_resource(void *data, const struct resource *res,
+ resource_size_t size, resource_size_t align)
{
resource_size_t start = res->start;
if (res->flags & IORESOURCE_IO && start & 0x300)
start = (start + 0x3ff) & ~0x3ff;
- res->start = (start + align - 1) & ~(align - 1);
+ start = (start + align - 1) & ~(align - 1);
+
+ return start;
}
/**
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index b476395..38e9033 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -37,6 +37,8 @@
#include <mach/nand.h>
#include <mach/keyscan.h>
+#include <media/tvp514x.h>
+
static inline int have_imager(void)
{
/* REVISIT when it's supported, trigger via Kconfig */
@@ -306,6 +308,73 @@
davinci_cfg_reg(DM365_SD1_DATA0);
}
+static struct tvp514x_platform_data tvp5146_pdata = {
+ .clk_polarity = 0,
+ .hs_polarity = 1,
+ .vs_polarity = 1
+};
+
+#define TVP514X_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL)
+/* Inputs available at the TVP5146 */
+static struct v4l2_input tvp5146_inputs[] = {
+ {
+ .index = 0,
+ .name = "Composite",
+ .type = V4L2_INPUT_TYPE_CAMERA,
+ .std = TVP514X_STD_ALL,
+ },
+ {
+ .index = 1,
+ .name = "S-Video",
+ .type = V4L2_INPUT_TYPE_CAMERA,
+ .std = TVP514X_STD_ALL,
+ },
+};
+
+/*
+ * this is the route info for connecting each input to decoder
+ * ouput that goes to vpfe. There is a one to one correspondence
+ * with tvp5146_inputs
+ */
+static struct vpfe_route tvp5146_routes[] = {
+ {
+ .input = INPUT_CVBS_VI2B,
+ .output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
+ },
+{
+ .input = INPUT_SVIDEO_VI2C_VI1C,
+ .output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
+ },
+};
+
+static struct vpfe_subdev_info vpfe_sub_devs[] = {
+ {
+ .name = "tvp5146",
+ .grp_id = 0,
+ .num_inputs = ARRAY_SIZE(tvp5146_inputs),
+ .inputs = tvp5146_inputs,
+ .routes = tvp5146_routes,
+ .can_route = 1,
+ .ccdc_if_params = {
+ .if_type = VPFE_BT656,
+ .hdpol = VPFE_PINPOL_POSITIVE,
+ .vdpol = VPFE_PINPOL_POSITIVE,
+ },
+ .board_info = {
+ I2C_BOARD_INFO("tvp5146", 0x5d),
+ .platform_data = &tvp5146_pdata,
+ },
+ },
+};
+
+static struct vpfe_config vpfe_cfg = {
+ .num_subdevs = ARRAY_SIZE(vpfe_sub_devs),
+ .sub_devs = vpfe_sub_devs,
+ .i2c_adapter_id = 1,
+ .card_name = "DM365 EVM",
+ .ccdc = "ISIF",
+};
+
static void __init evm_init_i2c(void)
{
davinci_init_i2c(&i2c_pdata);
@@ -497,6 +566,8 @@
static void __init dm365_evm_map_io(void)
{
+ /* setup input configuration for VPFE input devices */
+ dm365_set_vpfe_config(&vpfe_cfg);
dm365_init();
}
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index dedf4d4..d84e854 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -125,7 +125,6 @@
.lpsc = DAVINCI_LPSC_VPSSSLV,
};
-
static struct clk clkout1_clk = {
.name = "clkout1",
.parent = &pll1_aux_clk,
@@ -665,6 +664,17 @@
.resource = dm355_asp1_resources,
};
+static void dm355_ccdc_setup_pinmux(void)
+{
+ davinci_cfg_reg(DM355_VIN_PCLK);
+ davinci_cfg_reg(DM355_VIN_CAM_WEN);
+ davinci_cfg_reg(DM355_VIN_CAM_VD);
+ davinci_cfg_reg(DM355_VIN_CAM_HD);
+ davinci_cfg_reg(DM355_VIN_YIN_EN);
+ davinci_cfg_reg(DM355_VIN_CINL_EN);
+ davinci_cfg_reg(DM355_VIN_CINH_EN);
+}
+
static struct resource dm355_vpss_resources[] = {
{
/* VPSS BL Base address */
@@ -701,6 +711,10 @@
.end = IRQ_VDINT1,
.flags = IORESOURCE_IRQ,
},
+};
+
+static u64 vpfe_capture_dma_mask = DMA_BIT_MASK(32);
+static struct resource dm355_ccdc_resource[] = {
/* CCDC Base address */
{
.flags = IORESOURCE_MEM,
@@ -708,8 +722,18 @@
.end = 0x01c70600 + 0x1ff,
},
};
+static struct platform_device dm355_ccdc_dev = {
+ .name = "dm355_ccdc",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(dm355_ccdc_resource),
+ .resource = dm355_ccdc_resource,
+ .dev = {
+ .dma_mask = &vpfe_capture_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = dm355_ccdc_setup_pinmux,
+ },
+};
-static u64 vpfe_capture_dma_mask = DMA_BIT_MASK(32);
static struct platform_device vpfe_capture_dev = {
.name = CAPTURE_DRV_NAME,
.id = -1,
@@ -857,20 +881,13 @@
if (!cpu_is_davinci_dm355())
return 0;
+ /* Add ccdc clock aliases */
+ clk_add_alias("master", dm355_ccdc_dev.name, "vpss_master", NULL);
+ clk_add_alias("slave", dm355_ccdc_dev.name, "vpss_master", NULL);
davinci_cfg_reg(DM355_INT_EDMA_CC);
platform_device_register(&dm355_edma_device);
platform_device_register(&dm355_vpss_device);
- /*
- * setup Mux configuration for vpfe input and register
- * vpfe capture platform device
- */
- davinci_cfg_reg(DM355_VIN_PCLK);
- davinci_cfg_reg(DM355_VIN_CAM_WEN);
- davinci_cfg_reg(DM355_VIN_CAM_VD);
- davinci_cfg_reg(DM355_VIN_CAM_HD);
- davinci_cfg_reg(DM355_VIN_YIN_EN);
- davinci_cfg_reg(DM355_VIN_CINL_EN);
- davinci_cfg_reg(DM355_VIN_CINH_EN);
+ platform_device_register(&dm355_ccdc_dev);
platform_device_register(&vpfe_capture_dev);
return 0;
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index f53735c..ce9da43 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -1008,6 +1008,97 @@
davinci_common_init(&davinci_soc_info_dm365);
}
+static struct resource dm365_vpss_resources[] = {
+ {
+ /* VPSS ISP5 Base address */
+ .name = "isp5",
+ .start = 0x01c70000,
+ .end = 0x01c70000 + 0xff,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ /* VPSS CLK Base address */
+ .name = "vpss",
+ .start = 0x01c70200,
+ .end = 0x01c70200 + 0xff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device dm365_vpss_device = {
+ .name = "vpss",
+ .id = -1,
+ .dev.platform_data = "dm365_vpss",
+ .num_resources = ARRAY_SIZE(dm365_vpss_resources),
+ .resource = dm365_vpss_resources,
+};
+
+static struct resource vpfe_resources[] = {
+ {
+ .start = IRQ_VDINT0,
+ .end = IRQ_VDINT0,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_VDINT1,
+ .end = IRQ_VDINT1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static u64 vpfe_capture_dma_mask = DMA_BIT_MASK(32);
+static struct platform_device vpfe_capture_dev = {
+ .name = CAPTURE_DRV_NAME,
+ .id = -1,
+ .num_resources = ARRAY_SIZE(vpfe_resources),
+ .resource = vpfe_resources,
+ .dev = {
+ .dma_mask = &vpfe_capture_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+
+static void dm365_isif_setup_pinmux(void)
+{
+ davinci_cfg_reg(DM365_VIN_CAM_WEN);
+ davinci_cfg_reg(DM365_VIN_CAM_VD);
+ davinci_cfg_reg(DM365_VIN_CAM_HD);
+ davinci_cfg_reg(DM365_VIN_YIN4_7_EN);
+ davinci_cfg_reg(DM365_VIN_YIN0_3_EN);
+}
+
+static struct resource isif_resource[] = {
+ /* ISIF Base address */
+ {
+ .start = 0x01c71000,
+ .end = 0x01c71000 + 0x1ff,
+ .flags = IORESOURCE_MEM,
+ },
+ /* ISIF Linearization table 0 */
+ {
+ .start = 0x1C7C000,
+ .end = 0x1C7C000 + 0x2ff,
+ .flags = IORESOURCE_MEM,
+ },
+ /* ISIF Linearization table 1 */
+ {
+ .start = 0x1C7C400,
+ .end = 0x1C7C400 + 0x2ff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+static struct platform_device dm365_isif_dev = {
+ .name = "isif",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(isif_resource),
+ .resource = isif_resource,
+ .dev = {
+ .dma_mask = &vpfe_capture_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = dm365_isif_setup_pinmux,
+ },
+};
+
static int __init dm365_init_devices(void)
{
if (!cpu_is_davinci_dm365())
@@ -1016,7 +1107,16 @@
davinci_cfg_reg(DM365_INT_EDMA_CC);
platform_device_register(&dm365_edma_device);
platform_device_register(&dm365_emac_device);
-
+ /* Add isif clock alias */
+ clk_add_alias("master", dm365_isif_dev.name, "vpss_master", NULL);
+ platform_device_register(&dm365_vpss_device);
+ platform_device_register(&dm365_isif_dev);
+ platform_device_register(&vpfe_capture_dev);
return 0;
}
postcore_initcall(dm365_init_devices);
+
+void dm365_set_vpfe_config(struct vpfe_config *cfg)
+{
+ vpfe_capture_dev.dev.platform_data = cfg;
+}
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index 2cd0081..92aeb56 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -612,6 +612,11 @@
.end = IRQ_VDINT1,
.flags = IORESOURCE_IRQ,
},
+};
+
+static u64 vpfe_capture_dma_mask = DMA_BIT_MASK(32);
+static struct resource dm644x_ccdc_resource[] = {
+ /* CCDC Base address */
{
.start = 0x01c70400,
.end = 0x01c70400 + 0xff,
@@ -619,7 +624,17 @@
},
};
-static u64 vpfe_capture_dma_mask = DMA_BIT_MASK(32);
+static struct platform_device dm644x_ccdc_dev = {
+ .name = "dm644x_ccdc",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(dm644x_ccdc_resource),
+ .resource = dm644x_ccdc_resource,
+ .dev = {
+ .dma_mask = &vpfe_capture_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+
static struct platform_device vpfe_capture_dev = {
.name = CAPTURE_DRV_NAME,
.id = -1,
@@ -769,9 +784,13 @@
if (!cpu_is_davinci_dm644x())
return 0;
+ /* Add ccdc clock aliases */
+ clk_add_alias("master", dm644x_ccdc_dev.name, "vpss_master", NULL);
+ clk_add_alias("slave", dm644x_ccdc_dev.name, "vpss_slave", NULL);
platform_device_register(&dm644x_edma_device);
platform_device_register(&dm644x_emac_device);
platform_device_register(&dm644x_vpss_device);
+ platform_device_register(&dm644x_ccdc_dev);
platform_device_register(&vpfe_capture_dev);
return 0;
diff --git a/arch/arm/mach-davinci/include/mach/dm365.h b/arch/arm/mach-davinci/include/mach/dm365.h
index f1710a3..9fc5a64 100644
--- a/arch/arm/mach-davinci/include/mach/dm365.h
+++ b/arch/arm/mach-davinci/include/mach/dm365.h
@@ -18,6 +18,7 @@
#include <mach/emac.h>
#include <mach/asp.h>
#include <mach/keyscan.h>
+#include <media/davinci/vpfe_capture.h>
#define DM365_EMAC_BASE (0x01D07000)
#define DM365_EMAC_CNTRL_OFFSET (0x0000)
@@ -36,4 +37,5 @@
void __init dm365_init_ks(struct davinci_ks_platform_data *pdata);
void __init dm365_init_rtc(void);
+void dm365_set_vpfe_config(struct vpfe_config *cfg);
#endif /* __ASM_ARCH_DM365_H */
diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c
index f93c596..9bf33b3 100644
--- a/arch/arm/mach-nomadik/cpu-8815.c
+++ b/arch/arm/mach-nomadik/cpu-8815.c
@@ -86,11 +86,19 @@
},
};
+static struct amba_device cpu8815_amba_rng = {
+ .dev = {
+ .init_name = "rng",
+ },
+ __MEM_4K_RESOURCE(NOMADIK_RNG_BASE),
+};
+
static struct amba_device *amba_devs[] __initdata = {
cpu8815_amba_gpio + 0,
cpu8815_amba_gpio + 1,
cpu8815_amba_gpio + 2,
cpu8815_amba_gpio + 3,
+ &cpu8815_amba_rng
};
static int __init cpu8815_init(void)
diff --git a/arch/arm/mach-pxa/include/mach/camera.h b/arch/arm/mach-pxa/include/mach/camera.h
index 31abe6d..6709b1c 100644
--- a/arch/arm/mach-pxa/include/mach/camera.h
+++ b/arch/arm/mach-pxa/include/mach/camera.h
@@ -35,8 +35,6 @@
#define PXA_CAMERA_VSP 0x400
struct pxacamera_platform_data {
- int (*init)(struct device *);
-
unsigned long flags;
unsigned long mclk_10khz;
};
diff --git a/arch/cris/arch-v32/drivers/pci/bios.c b/arch/cris/arch-v32/drivers/pci/bios.c
index 77ee319..d4b9c36 100644
--- a/arch/cris/arch-v32/drivers/pci/bios.c
+++ b/arch/cris/arch-v32/drivers/pci/bios.c
@@ -41,18 +41,16 @@
return 0;
}
-void
-pcibios_align_resource(void *data, struct resource *res,
+resource_size_t
+pcibios_align_resource(void *data, const struct resource *res,
resource_size_t size, resource_size_t align)
{
- if (res->flags & IORESOURCE_IO) {
- resource_size_t start = res->start;
+ resource_size_t start = res->start;
- if (start & 0x300) {
- start = (start + 0x3ff) & ~0x3ff;
- res->start = start;
- }
- }
+ if ((res->flags & IORESOURCE_IO) && (start & 0x300))
+ start = (start + 0x3ff) & ~0x3ff;
+
+ return start
}
int pcibios_enable_resources(struct pci_dev *dev, int mask)
diff --git a/arch/frv/mb93090-mb00/pci-frv.c b/arch/frv/mb93090-mb00/pci-frv.c
index 566bdeb..1ed15d7 100644
--- a/arch/frv/mb93090-mb00/pci-frv.c
+++ b/arch/frv/mb93090-mb00/pci-frv.c
@@ -32,18 +32,16 @@
* but we want to try to avoid allocating at 0x2900-0x2bff
* which might have be mirrored at 0x0100-0x03ff..
*/
-void
-pcibios_align_resource(void *data, struct resource *res,
+resource_size_t
+pcibios_align_resource(void *data, const struct resource *res,
resource_size_t size, resource_size_t align)
{
- if (res->flags & IORESOURCE_IO) {
- resource_size_t start = res->start;
+ resource_size_t start = res->start;
- if (start & 0x300) {
- start = (start + 0x3ff) & ~0x3ff;
- res->start = start;
- }
- }
+ if ((res->flags & IORESOURCE_IO) && (start & 0x300))
+ start = (start + 0x3ff) & ~0x3ff;
+
+ return start
}
diff --git a/arch/ia64/include/asm/acpi.h b/arch/ia64/include/asm/acpi.h
index e97b255..93997bd 100644
--- a/arch/ia64/include/asm/acpi.h
+++ b/arch/ia64/include/asm/acpi.h
@@ -98,6 +98,7 @@
#endif
#define acpi_processor_cstate_check(x) (x) /* no idle limits on IA64 :) */
static inline void disable_acpi(void) { }
+static inline void pci_acpi_crs_quirks(void) { }
const char *acpi_get_sysname (void);
int acpi_request_vector (u32 int_type);
diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c
index df639db7..64aff52 100644
--- a/arch/ia64/pci/pci.c
+++ b/arch/ia64/pci/pci.c
@@ -320,9 +320,9 @@
static void __devinit
pcibios_setup_root_windows(struct pci_bus *bus, struct pci_controller *ctrl)
{
- int i, j;
+ int i;
- j = 0;
+ pci_bus_remove_resources(bus);
for (i = 0; i < ctrl->windows; i++) {
struct resource *res = &ctrl->window[i].resource;
/* HP's firmware has a hack to work around a Windows bug.
@@ -330,13 +330,7 @@
if ((res->flags & IORESOURCE_MEM) &&
(res->end - res->start < 16))
continue;
- if (j >= PCI_BUS_NUM_RESOURCES) {
- dev_warn(&bus->dev,
- "ignoring host bridge window %pR (no space)\n",
- res);
- continue;
- }
- bus->resource[j++] = res;
+ pci_bus_add_resource(bus, res, 0);
}
}
@@ -452,13 +446,12 @@
static int __devinit is_valid_resource(struct pci_dev *dev, int idx)
{
unsigned int i, type_mask = IORESOURCE_IO | IORESOURCE_MEM;
- struct resource *devr = &dev->resource[idx];
+ struct resource *devr = &dev->resource[idx], *busr;
if (!dev->bus)
return 0;
- for (i=0; i<PCI_BUS_NUM_RESOURCES; i++) {
- struct resource *busr = dev->bus->resource[i];
+ pci_bus_for_each_resource(dev->bus, busr, i) {
if (!busr || ((busr->flags ^ devr->flags) & type_mask))
continue;
if ((devr->start) && (devr->start >= busr->start) &&
@@ -547,10 +540,11 @@
acpi_pci_irq_disable(dev);
}
-void
-pcibios_align_resource (void *data, struct resource *res,
+resource_size_t
+pcibios_align_resource (void *data, const struct resource *res,
resource_size_t size, resource_size_t align)
{
+ return res->start;
}
/*
diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index cd5837e..b008168 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -130,6 +130,7 @@
config OF
def_bool y
+ select OF_FLATTREE
config PROC_DEVICETREE
bool "Support for device tree in /proc"
diff --git a/arch/microblaze/include/asm/prom.h b/arch/microblaze/include/asm/prom.h
index ef3ec1d..03f45a9 100644
--- a/arch/microblaze/include/asm/prom.h
+++ b/arch/microblaze/include/asm/prom.h
@@ -26,31 +26,11 @@
#include <asm/irq.h>
#include <asm/atomic.h>
-#define OF_ROOT_NODE_ADDR_CELLS_DEFAULT 1
-#define OF_ROOT_NODE_SIZE_CELLS_DEFAULT 1
-
-#define of_compat_cmp(s1, s2, l) strncasecmp((s1), (s2), (l))
-#define of_prop_cmp(s1, s2) strcmp((s1), (s2))
-#define of_node_cmp(s1, s2) strcasecmp((s1), (s2))
-
-extern struct device_node *of_chosen;
-
#define HAVE_ARCH_DEVTREE_FIXUPS
-extern struct device_node *allnodes; /* temporary while merging */
-extern rwlock_t devtree_lock; /* temporary while merging */
-
-/* For updating the device tree at runtime */
-extern void of_attach_node(struct device_node *);
-extern void of_detach_node(struct device_node *);
-
/* Other Prototypes */
extern int early_uartlite_console(void);
-extern struct resource *request_OF_resource(struct device_node *node,
- int index, const char *name_postfix);
-extern int release_OF_resource(struct device_node *node, int index);
-
/*
* OF address retreival & translation
*/
diff --git a/arch/microblaze/kernel/of_platform.c b/arch/microblaze/kernel/of_platform.c
index acf4574..1c6d684 100644
--- a/arch/microblaze/kernel/of_platform.c
+++ b/arch/microblaze/kernel/of_platform.c
@@ -185,7 +185,7 @@
static int of_dev_phandle_match(struct device *dev, void *data)
{
phandle *ph = data;
- return to_of_device(dev)->node->linux_phandle == *ph;
+ return to_of_device(dev)->node->phandle == *ph;
}
struct of_device *of_find_device_by_phandle(phandle ph)
diff --git a/arch/microblaze/kernel/prom.c b/arch/microblaze/kernel/prom.c
index b817df1..a15ef6d 100644
--- a/arch/microblaze/kernel/prom.c
+++ b/arch/microblaze/kernel/prom.c
@@ -42,698 +42,21 @@
#include <asm/sections.h>
#include <asm/pci-bridge.h>
-static int __initdata dt_root_addr_cells;
-static int __initdata dt_root_size_cells;
-
-typedef u32 cell_t;
-
-static struct boot_param_header *initial_boot_params;
-
-/* export that to outside world */
-struct device_node *of_chosen;
-
-static inline char *find_flat_dt_string(u32 offset)
+void __init early_init_dt_scan_chosen_arch(unsigned long node)
{
- return ((char *)initial_boot_params) +
- initial_boot_params->off_dt_strings + offset;
+ /* No Microblaze specific code here */
}
-/**
- * This function is used to scan the flattened device-tree, it is
- * used to extract the memory informations at boot before we can
- * unflatten the tree
- */
-int __init of_scan_flat_dt(int (*it)(unsigned long node,
- const char *uname, int depth,
- void *data),
- void *data)
+void __init early_init_dt_add_memory_arch(u64 base, u64 size)
{
- unsigned long p = ((unsigned long)initial_boot_params) +
- initial_boot_params->off_dt_struct;
- int rc = 0;
- int depth = -1;
-
- do {
- u32 tag = *((u32 *)p);
- char *pathp;
-
- p += 4;
- if (tag == OF_DT_END_NODE) {
- depth--;
- continue;
- }
- if (tag == OF_DT_NOP)
- continue;
- if (tag == OF_DT_END)
- break;
- if (tag == OF_DT_PROP) {
- u32 sz = *((u32 *)p);
- p += 8;
- if (initial_boot_params->version < 0x10)
- p = _ALIGN(p, sz >= 8 ? 8 : 4);
- p += sz;
- p = _ALIGN(p, 4);
- continue;
- }
- if (tag != OF_DT_BEGIN_NODE) {
- printk(KERN_WARNING "Invalid tag %x scanning flattened"
- " device tree !\n", tag);
- return -EINVAL;
- }
- depth++;
- pathp = (char *)p;
- p = _ALIGN(p + strlen(pathp) + 1, 4);
- if ((*pathp) == '/') {
- char *lp, *np;
- for (lp = NULL, np = pathp; *np; np++)
- if ((*np) == '/')
- lp = np+1;
- if (lp != NULL)
- pathp = lp;
- }
- rc = it(p, pathp, depth, data);
- if (rc != 0)
- break;
- } while (1);
-
- return rc;
+ lmb_add(base, size);
}
-unsigned long __init of_get_flat_dt_root(void)
+u64 __init early_init_dt_alloc_memory_arch(u64 size, u64 align)
{
- unsigned long p = ((unsigned long)initial_boot_params) +
- initial_boot_params->off_dt_struct;
-
- while (*((u32 *)p) == OF_DT_NOP)
- p += 4;
- BUG_ON(*((u32 *)p) != OF_DT_BEGIN_NODE);
- p += 4;
- return _ALIGN(p + strlen((char *)p) + 1, 4);
+ return lmb_alloc(size, align);
}
-/**
- * This function can be used within scan_flattened_dt callback to get
- * access to properties
- */
-void *__init of_get_flat_dt_prop(unsigned long node, const char *name,
- unsigned long *size)
-{
- unsigned long p = node;
-
- do {
- u32 tag = *((u32 *)p);
- u32 sz, noff;
- const char *nstr;
-
- p += 4;
- if (tag == OF_DT_NOP)
- continue;
- if (tag != OF_DT_PROP)
- return NULL;
-
- sz = *((u32 *)p);
- noff = *((u32 *)(p + 4));
- p += 8;
- if (initial_boot_params->version < 0x10)
- p = _ALIGN(p, sz >= 8 ? 8 : 4);
-
- nstr = find_flat_dt_string(noff);
- if (nstr == NULL) {
- printk(KERN_WARNING "Can't find property index"
- " name !\n");
- return NULL;
- }
- if (strcmp(name, nstr) == 0) {
- if (size)
- *size = sz;
- return (void *)p;
- }
- p += sz;
- p = _ALIGN(p, 4);
- } while (1);
-}
-
-int __init of_flat_dt_is_compatible(unsigned long node, const char *compat)
-{
- const char *cp;
- unsigned long cplen, l;
-
- cp = of_get_flat_dt_prop(node, "compatible", &cplen);
- if (cp == NULL)
- return 0;
- while (cplen > 0) {
- if (strncasecmp(cp, compat, strlen(compat)) == 0)
- return 1;
- l = strlen(cp) + 1;
- cp += l;
- cplen -= l;
- }
-
- return 0;
-}
-
-static void *__init unflatten_dt_alloc(unsigned long *mem, unsigned long size,
- unsigned long align)
-{
- void *res;
-
- *mem = _ALIGN(*mem, align);
- res = (void *)*mem;
- *mem += size;
-
- return res;
-}
-
-static unsigned long __init unflatten_dt_node(unsigned long mem,
- unsigned long *p,
- struct device_node *dad,
- struct device_node ***allnextpp,
- unsigned long fpsize)
-{
- struct device_node *np;
- struct property *pp, **prev_pp = NULL;
- char *pathp;
- u32 tag;
- unsigned int l, allocl;
- int has_name = 0;
- int new_format = 0;
-
- tag = *((u32 *)(*p));
- if (tag != OF_DT_BEGIN_NODE) {
- printk("Weird tag at start of node: %x\n", tag);
- return mem;
- }
- *p += 4;
- pathp = (char *)*p;
- l = allocl = strlen(pathp) + 1;
- *p = _ALIGN(*p + l, 4);
-
- /* version 0x10 has a more compact unit name here instead of the full
- * path. we accumulate the full path size using "fpsize", we'll rebuild
- * it later. We detect this because the first character of the name is
- * not '/'.
- */
- if ((*pathp) != '/') {
- new_format = 1;
- if (fpsize == 0) {
- /* root node: special case. fpsize accounts for path
- * plus terminating zero. root node only has '/', so
- * fpsize should be 2, but we want to avoid the first
- * level nodes to have two '/' so we use fpsize 1 here
- */
- fpsize = 1;
- allocl = 2;
- } else {
- /* account for '/' and path size minus terminal 0
- * already in 'l'
- */
- fpsize += l;
- allocl = fpsize;
- }
- }
-
- np = unflatten_dt_alloc(&mem, sizeof(struct device_node) + allocl,
- __alignof__(struct device_node));
- if (allnextpp) {
- memset(np, 0, sizeof(*np));
- np->full_name = ((char *)np) + sizeof(struct device_node);
- if (new_format) {
- char *p2 = np->full_name;
- /* rebuild full path for new format */
- if (dad && dad->parent) {
- strcpy(p2, dad->full_name);
-#ifdef DEBUG
- if ((strlen(p2) + l + 1) != allocl) {
- pr_debug("%s: p: %d, l: %d, a: %d\n",
- pathp, (int)strlen(p2),
- l, allocl);
- }
-#endif
- p2 += strlen(p2);
- }
- *(p2++) = '/';
- memcpy(p2, pathp, l);
- } else
- memcpy(np->full_name, pathp, l);
- prev_pp = &np->properties;
- **allnextpp = np;
- *allnextpp = &np->allnext;
- if (dad != NULL) {
- np->parent = dad;
- /* we temporarily use the next field as `last_child'*/
- if (dad->next == NULL)
- dad->child = np;
- else
- dad->next->sibling = np;
- dad->next = np;
- }
- kref_init(&np->kref);
- }
- while (1) {
- u32 sz, noff;
- char *pname;
-
- tag = *((u32 *)(*p));
- if (tag == OF_DT_NOP) {
- *p += 4;
- continue;
- }
- if (tag != OF_DT_PROP)
- break;
- *p += 4;
- sz = *((u32 *)(*p));
- noff = *((u32 *)((*p) + 4));
- *p += 8;
- if (initial_boot_params->version < 0x10)
- *p = _ALIGN(*p, sz >= 8 ? 8 : 4);
-
- pname = find_flat_dt_string(noff);
- if (pname == NULL) {
- printk(KERN_INFO
- "Can't find property name in list !\n");
- break;
- }
- if (strcmp(pname, "name") == 0)
- has_name = 1;
- l = strlen(pname) + 1;
- pp = unflatten_dt_alloc(&mem, sizeof(struct property),
- __alignof__(struct property));
- if (allnextpp) {
- if (strcmp(pname, "linux,phandle") == 0) {
- np->node = *((u32 *)*p);
- if (np->linux_phandle == 0)
- np->linux_phandle = np->node;
- }
- if (strcmp(pname, "ibm,phandle") == 0)
- np->linux_phandle = *((u32 *)*p);
- pp->name = pname;
- pp->length = sz;
- pp->value = (void *)*p;
- *prev_pp = pp;
- prev_pp = &pp->next;
- }
- *p = _ALIGN((*p) + sz, 4);
- }
- /* with version 0x10 we may not have the name property, recreate
- * it here from the unit name if absent
- */
- if (!has_name) {
- char *p1 = pathp, *ps = pathp, *pa = NULL;
- int sz;
-
- while (*p1) {
- if ((*p1) == '@')
- pa = p1;
- if ((*p1) == '/')
- ps = p1 + 1;
- p1++;
- }
- if (pa < ps)
- pa = p1;
- sz = (pa - ps) + 1;
- pp = unflatten_dt_alloc(&mem, sizeof(struct property) + sz,
- __alignof__(struct property));
- if (allnextpp) {
- pp->name = "name";
- pp->length = sz;
- pp->value = pp + 1;
- *prev_pp = pp;
- prev_pp = &pp->next;
- memcpy(pp->value, ps, sz - 1);
- ((char *)pp->value)[sz - 1] = 0;
- pr_debug("fixed up name for %s -> %s\n", pathp,
- (char *)pp->value);
- }
- }
- if (allnextpp) {
- *prev_pp = NULL;
- np->name = of_get_property(np, "name", NULL);
- np->type = of_get_property(np, "device_type", NULL);
-
- if (!np->name)
- np->name = "<NULL>";
- if (!np->type)
- np->type = "<NULL>";
- }
- while (tag == OF_DT_BEGIN_NODE) {
- mem = unflatten_dt_node(mem, p, np, allnextpp, fpsize);
- tag = *((u32 *)(*p));
- }
- if (tag != OF_DT_END_NODE) {
- printk(KERN_INFO "Weird tag at end of node: %x\n", tag);
- return mem;
- }
- *p += 4;
- return mem;
-}
-
-/**
- * unflattens the device-tree passed by the firmware, creating the
- * tree of struct device_node. It also fills the "name" and "type"
- * pointers of the nodes so the normal device-tree walking functions
- * can be used (this used to be done by finish_device_tree)
- */
-void __init unflatten_device_tree(void)
-{
- unsigned long start, mem, size;
- struct device_node **allnextp = &allnodes;
-
- pr_debug(" -> unflatten_device_tree()\n");
-
- /* First pass, scan for size */
- start = ((unsigned long)initial_boot_params) +
- initial_boot_params->off_dt_struct;
- size = unflatten_dt_node(0, &start, NULL, NULL, 0);
- size = (size | 3) + 1;
-
- pr_debug(" size is %lx, allocating...\n", size);
-
- /* Allocate memory for the expanded device tree */
- mem = lmb_alloc(size + 4, __alignof__(struct device_node));
- mem = (unsigned long) __va(mem);
-
- ((u32 *)mem)[size / 4] = 0xdeadbeef;
-
- pr_debug(" unflattening %lx...\n", mem);
-
- /* Second pass, do actual unflattening */
- start = ((unsigned long)initial_boot_params) +
- initial_boot_params->off_dt_struct;
- unflatten_dt_node(mem, &start, NULL, &allnextp, 0);
- if (*((u32 *)start) != OF_DT_END)
- printk(KERN_WARNING "Weird tag at end of tree: %08x\n",
- *((u32 *)start));
- if (((u32 *)mem)[size / 4] != 0xdeadbeef)
- printk(KERN_WARNING "End of tree marker overwritten: %08x\n",
- ((u32 *)mem)[size / 4]);
- *allnextp = NULL;
-
- /* Get pointer to OF "/chosen" node for use everywhere */
- of_chosen = of_find_node_by_path("/chosen");
- if (of_chosen == NULL)
- of_chosen = of_find_node_by_path("/chosen@0");
-
- pr_debug(" <- unflatten_device_tree()\n");
-}
-
-#define early_init_dt_scan_drconf_memory(node) 0
-
-static int __init early_init_dt_scan_cpus(unsigned long node,
- const char *uname, int depth,
- void *data)
-{
- static int logical_cpuid;
- char *type = of_get_flat_dt_prop(node, "device_type", NULL);
- const u32 *intserv;
- int i, nthreads;
- int found = 0;
-
- /* We are scanning "cpu" nodes only */
- if (type == NULL || strcmp(type, "cpu") != 0)
- return 0;
-
- /* Get physical cpuid */
- intserv = of_get_flat_dt_prop(node, "reg", NULL);
- nthreads = 1;
-
- /*
- * Now see if any of these threads match our boot cpu.
- * NOTE: This must match the parsing done in smp_setup_cpu_maps.
- */
- for (i = 0; i < nthreads; i++) {
- /*
- * version 2 of the kexec param format adds the phys cpuid of
- * booted proc.
- */
- if (initial_boot_params && initial_boot_params->version >= 2) {
- if (intserv[i] ==
- initial_boot_params->boot_cpuid_phys) {
- found = 1;
- break;
- }
- } else {
- /*
- * Check if it's the boot-cpu, set it's hw index now,
- * unfortunately this format did not support booting
- * off secondary threads.
- */
- if (of_get_flat_dt_prop(node,
- "linux,boot-cpu", NULL) != NULL) {
- found = 1;
- break;
- }
- }
-
-#ifdef CONFIG_SMP
- /* logical cpu id is always 0 on UP kernels */
- logical_cpuid++;
-#endif
- }
-
- if (found) {
- pr_debug("boot cpu: logical %d physical %d\n", logical_cpuid,
- intserv[i]);
- boot_cpuid = logical_cpuid;
- }
-
- return 0;
-}
-
-#ifdef CONFIG_BLK_DEV_INITRD
-static void __init early_init_dt_check_for_initrd(unsigned long node)
-{
- unsigned long l;
- u32 *prop;
-
- pr_debug("Looking for initrd properties... ");
-
- prop = of_get_flat_dt_prop(node, "linux,initrd-start", &l);
- if (prop) {
- initrd_start = (unsigned long)
- __va((u32)of_read_ulong(prop, l/4));
-
- prop = of_get_flat_dt_prop(node, "linux,initrd-end", &l);
- if (prop) {
- initrd_end = (unsigned long)
- __va((u32)of_read_ulong(prop, 1/4));
- initrd_below_start_ok = 1;
- } else {
- initrd_start = 0;
- }
- }
-
- pr_debug("initrd_start=0x%lx initrd_end=0x%lx\n",
- initrd_start, initrd_end);
-}
-#else
-static inline void early_init_dt_check_for_initrd(unsigned long node)
-{
-}
-#endif /* CONFIG_BLK_DEV_INITRD */
-
-static int __init early_init_dt_scan_chosen(unsigned long node,
- const char *uname, int depth, void *data)
-{
- unsigned long l;
- char *p;
-
- pr_debug("search \"chosen\", depth: %d, uname: %s\n", depth, uname);
-
- if (depth != 1 ||
- (strcmp(uname, "chosen") != 0 &&
- strcmp(uname, "chosen@0") != 0))
- return 0;
-
-#ifdef CONFIG_KEXEC
- lprop = (u64 *)of_get_flat_dt_prop(node,
- "linux,crashkernel-base", NULL);
- if (lprop)
- crashk_res.start = *lprop;
-
- lprop = (u64 *)of_get_flat_dt_prop(node,
- "linux,crashkernel-size", NULL);
- if (lprop)
- crashk_res.end = crashk_res.start + *lprop - 1;
-#endif
-
- early_init_dt_check_for_initrd(node);
-
- /* Retreive command line */
- p = of_get_flat_dt_prop(node, "bootargs", &l);
- if (p != NULL && l > 0)
- strlcpy(cmd_line, p, min((int)l, COMMAND_LINE_SIZE));
-
-#ifdef CONFIG_CMDLINE
-#ifndef CONFIG_CMDLINE_FORCE
- if (p == NULL || l == 0 || (l == 1 && (*p) == 0))
-#endif
- strlcpy(cmd_line, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
-#endif /* CONFIG_CMDLINE */
-
- pr_debug("Command line is: %s\n", cmd_line);
-
- /* break now */
- return 1;
-}
-
-static int __init early_init_dt_scan_root(unsigned long node,
- const char *uname, int depth, void *data)
-{
- u32 *prop;
-
- if (depth != 0)
- return 0;
-
- prop = of_get_flat_dt_prop(node, "#size-cells", NULL);
- dt_root_size_cells = (prop == NULL) ? 1 : *prop;
- pr_debug("dt_root_size_cells = %x\n", dt_root_size_cells);
-
- prop = of_get_flat_dt_prop(node, "#address-cells", NULL);
- dt_root_addr_cells = (prop == NULL) ? 2 : *prop;
- pr_debug("dt_root_addr_cells = %x\n", dt_root_addr_cells);
-
- /* break now */
- return 1;
-}
-
-static u64 __init dt_mem_next_cell(int s, cell_t **cellp)
-{
- cell_t *p = *cellp;
-
- *cellp = p + s;
- return of_read_number(p, s);
-}
-
-static int __init early_init_dt_scan_memory(unsigned long node,
- const char *uname, int depth, void *data)
-{
- char *type = of_get_flat_dt_prop(node, "device_type", NULL);
- cell_t *reg, *endp;
- unsigned long l;
-
- /* Look for the ibm,dynamic-reconfiguration-memory node */
-/* if (depth == 1 &&
- strcmp(uname, "ibm,dynamic-reconfiguration-memory") == 0)
- return early_init_dt_scan_drconf_memory(node);
-*/
- /* We are scanning "memory" nodes only */
- if (type == NULL) {
- /*
- * The longtrail doesn't have a device_type on the
- * /memory node, so look for the node called /memory@0.
- */
- if (depth != 1 || strcmp(uname, "memory@0") != 0)
- return 0;
- } else if (strcmp(type, "memory") != 0)
- return 0;
-
- reg = (cell_t *)of_get_flat_dt_prop(node, "linux,usable-memory", &l);
- if (reg == NULL)
- reg = (cell_t *)of_get_flat_dt_prop(node, "reg", &l);
- if (reg == NULL)
- return 0;
-
- endp = reg + (l / sizeof(cell_t));
-
- pr_debug("memory scan node %s, reg size %ld, data: %x %x %x %x,\n",
- uname, l, reg[0], reg[1], reg[2], reg[3]);
-
- while ((endp - reg) >= (dt_root_addr_cells + dt_root_size_cells)) {
- u64 base, size;
-
- base = dt_mem_next_cell(dt_root_addr_cells, ®);
- size = dt_mem_next_cell(dt_root_size_cells, ®);
-
- if (size == 0)
- continue;
- pr_debug(" - %llx , %llx\n", (unsigned long long)base,
- (unsigned long long)size);
-
- lmb_add(base, size);
- }
- return 0;
-}
-
-#ifdef CONFIG_PHYP_DUMP
-/**
- * phyp_dump_calculate_reserve_size() - reserve variable boot area 5% or arg
- *
- * Function to find the largest size we need to reserve
- * during early boot process.
- *
- * It either looks for boot param and returns that OR
- * returns larger of 256 or 5% rounded down to multiples of 256MB.
- *
- */
-static inline unsigned long phyp_dump_calculate_reserve_size(void)
-{
- unsigned long tmp;
-
- if (phyp_dump_info->reserve_bootvar)
- return phyp_dump_info->reserve_bootvar;
-
- /* divide by 20 to get 5% of value */
- tmp = lmb_end_of_DRAM();
- do_div(tmp, 20);
-
- /* round it down in multiples of 256 */
- tmp = tmp & ~0x0FFFFFFFUL;
-
- return (tmp > PHYP_DUMP_RMR_END ? tmp : PHYP_DUMP_RMR_END);
-}
-
-/**
- * phyp_dump_reserve_mem() - reserve all not-yet-dumped mmemory
- *
- * This routine may reserve memory regions in the kernel only
- * if the system is supported and a dump was taken in last
- * boot instance or if the hardware is supported and the
- * scratch area needs to be setup. In other instances it returns
- * without reserving anything. The memory in case of dump being
- * active is freed when the dump is collected (by userland tools).
- */
-static void __init phyp_dump_reserve_mem(void)
-{
- unsigned long base, size;
- unsigned long variable_reserve_size;
-
- if (!phyp_dump_info->phyp_dump_configured) {
- printk(KERN_ERR "Phyp-dump not supported on this hardware\n");
- return;
- }
-
- if (!phyp_dump_info->phyp_dump_at_boot) {
- printk(KERN_INFO "Phyp-dump disabled at boot time\n");
- return;
- }
-
- variable_reserve_size = phyp_dump_calculate_reserve_size();
-
- if (phyp_dump_info->phyp_dump_is_active) {
- /* Reserve *everything* above RMR.Area freed by userland tools*/
- base = variable_reserve_size;
- size = lmb_end_of_DRAM() - base;
-
- /* XXX crashed_ram_end is wrong, since it may be beyond
- * the memory_limit, it will need to be adjusted. */
- lmb_reserve(base, size);
-
- phyp_dump_info->init_reserve_start = base;
- phyp_dump_info->init_reserve_size = size;
- } else {
- size = phyp_dump_info->cpu_state_size +
- phyp_dump_info->hpte_region_size +
- variable_reserve_size;
- base = lmb_end_of_DRAM() - size;
- lmb_reserve(base, size);
- phyp_dump_info->init_reserve_start = base;
- phyp_dump_info->init_reserve_size = size;
- }
-}
-#else
-static inline void __init phyp_dump_reserve_mem(void) {}
-#endif /* CONFIG_PHYP_DUMP && CONFIG_PPC_RTAS */
-
#ifdef CONFIG_EARLY_PRINTK
/* MS this is Microblaze specifig function */
static int __init early_init_dt_scan_serial(unsigned long node,
@@ -775,11 +98,6 @@
/* Setup flat device-tree pointer */
initial_boot_params = params;
-#ifdef CONFIG_PHYP_DUMP
- /* scan tree to see if dump occured during last boot */
- of_scan_flat_dt(early_init_dt_scan_phyp_dump, NULL);
-#endif
-
/* Retrieve various informations from the /chosen node of the
* device-tree, including the platform type, initrd location and
* size, TCE reserve, and more ...
@@ -799,33 +117,18 @@
pr_debug("Phys. mem: %lx\n", (unsigned long) lmb_phys_mem_size());
- pr_debug("Scanning CPUs ...\n");
-
- /* Retreive CPU related informations from the flat tree
- * (altivec support, boot CPU ID, ...)
- */
- of_scan_flat_dt(early_init_dt_scan_cpus, NULL);
-
pr_debug(" <- early_init_devtree()\n");
}
-/**
- * Indicates whether the root node has a given value in its
- * compatible property.
- */
-int machine_is_compatible(const char *compat)
+#ifdef CONFIG_BLK_DEV_INITRD
+void __init early_init_dt_setup_initrd_arch(unsigned long start,
+ unsigned long end)
{
- struct device_node *root;
- int rc = 0;
-
- root = of_find_node_by_path("/");
- if (root) {
- rc = of_device_is_compatible(root, compat);
- of_node_put(root);
- }
- return rc;
+ initrd_start = (unsigned long)__va(start);
+ initrd_end = (unsigned long)__va(end);
+ initrd_below_start_ok = 1;
}
-EXPORT_SYMBOL(machine_is_compatible);
+#endif
/*******
*
@@ -838,273 +141,6 @@
*
*******/
-/**
- * of_find_node_by_phandle - Find a node given a phandle
- * @handle: phandle of the node to find
- *
- * Returns a node pointer with refcount incremented, use
- * of_node_put() on it when done.
- */
-struct device_node *of_find_node_by_phandle(phandle handle)
-{
- struct device_node *np;
-
- read_lock(&devtree_lock);
- for (np = allnodes; np != NULL; np = np->allnext)
- if (np->linux_phandle == handle)
- break;
- of_node_get(np);
- read_unlock(&devtree_lock);
- return np;
-}
-EXPORT_SYMBOL(of_find_node_by_phandle);
-
-/**
- * of_node_get - Increment refcount of a node
- * @node: Node to inc refcount, NULL is supported to
- * simplify writing of callers
- *
- * Returns node.
- */
-struct device_node *of_node_get(struct device_node *node)
-{
- if (node)
- kref_get(&node->kref);
- return node;
-}
-EXPORT_SYMBOL(of_node_get);
-
-static inline struct device_node *kref_to_device_node(struct kref *kref)
-{
- return container_of(kref, struct device_node, kref);
-}
-
-/**
- * of_node_release - release a dynamically allocated node
- * @kref: kref element of the node to be released
- *
- * In of_node_put() this function is passed to kref_put()
- * as the destructor.
- */
-static void of_node_release(struct kref *kref)
-{
- struct device_node *node = kref_to_device_node(kref);
- struct property *prop = node->properties;
-
- /* We should never be releasing nodes that haven't been detached. */
- if (!of_node_check_flag(node, OF_DETACHED)) {
- printk(KERN_INFO "WARNING: Bad of_node_put() on %s\n",
- node->full_name);
- dump_stack();
- kref_init(&node->kref);
- return;
- }
-
- if (!of_node_check_flag(node, OF_DYNAMIC))
- return;
-
- while (prop) {
- struct property *next = prop->next;
- kfree(prop->name);
- kfree(prop->value);
- kfree(prop);
- prop = next;
-
- if (!prop) {
- prop = node->deadprops;
- node->deadprops = NULL;
- }
- }
- kfree(node->full_name);
- kfree(node->data);
- kfree(node);
-}
-
-/**
- * of_node_put - Decrement refcount of a node
- * @node: Node to dec refcount, NULL is supported to
- * simplify writing of callers
- *
- */
-void of_node_put(struct device_node *node)
-{
- if (node)
- kref_put(&node->kref, of_node_release);
-}
-EXPORT_SYMBOL(of_node_put);
-
-/*
- * Plug a device node into the tree and global list.
- */
-void of_attach_node(struct device_node *np)
-{
- unsigned long flags;
-
- write_lock_irqsave(&devtree_lock, flags);
- np->sibling = np->parent->child;
- np->allnext = allnodes;
- np->parent->child = np;
- allnodes = np;
- write_unlock_irqrestore(&devtree_lock, flags);
-}
-
-/*
- * "Unplug" a node from the device tree. The caller must hold
- * a reference to the node. The memory associated with the node
- * is not freed until its refcount goes to zero.
- */
-void of_detach_node(struct device_node *np)
-{
- struct device_node *parent;
- unsigned long flags;
-
- write_lock_irqsave(&devtree_lock, flags);
-
- parent = np->parent;
- if (!parent)
- goto out_unlock;
-
- if (allnodes == np)
- allnodes = np->allnext;
- else {
- struct device_node *prev;
- for (prev = allnodes;
- prev->allnext != np;
- prev = prev->allnext)
- ;
- prev->allnext = np->allnext;
- }
-
- if (parent->child == np)
- parent->child = np->sibling;
- else {
- struct device_node *prevsib;
- for (prevsib = np->parent->child;
- prevsib->sibling != np;
- prevsib = prevsib->sibling)
- ;
- prevsib->sibling = np->sibling;
- }
-
- of_node_set_flag(np, OF_DETACHED);
-
-out_unlock:
- write_unlock_irqrestore(&devtree_lock, flags);
-}
-
-/*
- * Add a property to a node
- */
-int prom_add_property(struct device_node *np, struct property *prop)
-{
- struct property **next;
- unsigned long flags;
-
- prop->next = NULL;
- write_lock_irqsave(&devtree_lock, flags);
- next = &np->properties;
- while (*next) {
- if (strcmp(prop->name, (*next)->name) == 0) {
- /* duplicate ! don't insert it */
- write_unlock_irqrestore(&devtree_lock, flags);
- return -1;
- }
- next = &(*next)->next;
- }
- *next = prop;
- write_unlock_irqrestore(&devtree_lock, flags);
-
-#ifdef CONFIG_PROC_DEVICETREE
- /* try to add to proc as well if it was initialized */
- if (np->pde)
- proc_device_tree_add_prop(np->pde, prop);
-#endif /* CONFIG_PROC_DEVICETREE */
-
- return 0;
-}
-
-/*
- * Remove a property from a node. Note that we don't actually
- * remove it, since we have given out who-knows-how-many pointers
- * to the data using get-property. Instead we just move the property
- * to the "dead properties" list, so it won't be found any more.
- */
-int prom_remove_property(struct device_node *np, struct property *prop)
-{
- struct property **next;
- unsigned long flags;
- int found = 0;
-
- write_lock_irqsave(&devtree_lock, flags);
- next = &np->properties;
- while (*next) {
- if (*next == prop) {
- /* found the node */
- *next = prop->next;
- prop->next = np->deadprops;
- np->deadprops = prop;
- found = 1;
- break;
- }
- next = &(*next)->next;
- }
- write_unlock_irqrestore(&devtree_lock, flags);
-
- if (!found)
- return -ENODEV;
-
-#ifdef CONFIG_PROC_DEVICETREE
- /* try to remove the proc node as well */
- if (np->pde)
- proc_device_tree_remove_prop(np->pde, prop);
-#endif /* CONFIG_PROC_DEVICETREE */
-
- return 0;
-}
-
-/*
- * Update a property in a node. Note that we don't actually
- * remove it, since we have given out who-knows-how-many pointers
- * to the data using get-property. Instead we just move the property
- * to the "dead properties" list, and add the new property to the
- * property list
- */
-int prom_update_property(struct device_node *np,
- struct property *newprop,
- struct property *oldprop)
-{
- struct property **next;
- unsigned long flags;
- int found = 0;
-
- write_lock_irqsave(&devtree_lock, flags);
- next = &np->properties;
- while (*next) {
- if (*next == oldprop) {
- /* found the node */
- newprop->next = oldprop->next;
- *next = newprop;
- oldprop->next = np->deadprops;
- np->deadprops = oldprop;
- found = 1;
- break;
- }
- next = &(*next)->next;
- }
- write_unlock_irqrestore(&devtree_lock, flags);
-
- if (!found)
- return -ENODEV;
-
-#ifdef CONFIG_PROC_DEVICETREE
- /* try to add to proc as well if it was initialized */
- if (np->pde)
- proc_device_tree_update_prop(np->pde, newprop, oldprop);
-#endif /* CONFIG_PROC_DEVICETREE */
-
- return 0;
-}
-
#if defined(CONFIG_DEBUG_FS) && defined(DEBUG)
static struct debugfs_blob_wrapper flat_dt_blob;
diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c
index 9a11c22..f87f5e1 100644
--- a/arch/mips/pci/pci.c
+++ b/arch/mips/pci/pci.c
@@ -49,8 +49,8 @@
* but we want to try to avoid allocating at 0x2900-0x2bff
* which might have be mirrored at 0x0100-0x03ff..
*/
-void
-pcibios_align_resource(void *data, struct resource *res,
+resource_size_t
+pcibios_align_resource(void *data, const struct resource *res,
resource_size_t size, resource_size_t align)
{
struct pci_dev *dev = data;
@@ -73,7 +73,7 @@
start = PCIBIOS_MIN_MEM + hose->mem_resource->start;
}
- res->start = start;
+ return start;
}
static void __devinit pcibios_scanbus(struct pci_controller *hose)
diff --git a/arch/mips/pmc-sierra/yosemite/ht.c b/arch/mips/pmc-sierra/yosemite/ht.c
index 678388f..fd22597 100644
--- a/arch/mips/pmc-sierra/yosemite/ht.c
+++ b/arch/mips/pmc-sierra/yosemite/ht.c
@@ -345,14 +345,13 @@
return pcibios_enable_resources(dev);
}
-void pcibios_align_resource(void *data, struct resource *res,
- resource_size_t size, resource_size_t align)
+resource_size_t pcibios_align_resource(void *data, const struct resource *res,
+ resource_size_t size, resource_size_t align)
{
struct pci_dev *dev = data;
+ resource_size_t start = res->start;
if (res->flags & IORESOURCE_IO) {
- resource_size_t start = res->start;
-
/* We need to avoid collisions with `mirrored' VGA ports
and other strange ISA hardware, so we always want the
addresses kilobyte aligned. */
@@ -363,8 +362,9 @@
}
start = (start + 1024 - 1) & ~(1024 - 1);
- res->start = start;
}
+
+ return start;
}
struct pci_ops titan_pci_ops = {
diff --git a/arch/mn10300/unit-asb2305/pci-asb2305.c b/arch/mn10300/unit-asb2305/pci-asb2305.c
index 78cd134..d6119b8 100644
--- a/arch/mn10300/unit-asb2305/pci-asb2305.c
+++ b/arch/mn10300/unit-asb2305/pci-asb2305.c
@@ -31,9 +31,11 @@
* but we want to try to avoid allocating at 0x2900-0x2bff
* which might have be mirrored at 0x0100-0x03ff..
*/
-void pcibios_align_resource(void *data, struct resource *res,
- resource_size_t size, resource_size_t align)
+resource_size_t pcibios_align_resource(void *data, const struct resource *res,
+ resource_size_t size, resource_size_t align)
{
+ resource_size_t start = res->start;
+
#if 0
struct pci_dev *dev = data;
@@ -47,14 +49,10 @@
);
#endif
- if (res->flags & IORESOURCE_IO) {
- unsigned long start = res->start;
+ if ((res->flags & IORESOURCE_IO) && (start & 0x300))
+ start = (start + 0x3ff) & ~0x3ff;
- if (start & 0x300) {
- start = (start + 0x3ff) & ~0x3ff;
- res->start = start;
- }
- }
+ return start;
}
diff --git a/arch/mn10300/unit-asb2305/pci.c b/arch/mn10300/unit-asb2305/pci.c
index 2cb7e75..6d8720a 100644
--- a/arch/mn10300/unit-asb2305/pci.c
+++ b/arch/mn10300/unit-asb2305/pci.c
@@ -331,12 +331,10 @@
static int __devinit is_valid_resource(struct pci_dev *dev, int idx)
{
unsigned int i, type_mask = IORESOURCE_IO | IORESOURCE_MEM;
- struct resource *devr = &dev->resource[idx];
+ struct resource *devr = &dev->resource[idx], *busr;
if (dev->bus) {
- for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) {
- struct resource *busr = dev->bus->resource[i];
-
+ pci_bus_for_each_resource(dev->bus, busr, i) {
if (!busr || (busr->flags ^ devr->flags) & type_mask)
continue;
diff --git a/arch/parisc/include/asm/cacheflush.h b/arch/parisc/include/asm/cacheflush.h
index 7a73b61..4772777 100644
--- a/arch/parisc/include/asm/cacheflush.h
+++ b/arch/parisc/include/asm/cacheflush.h
@@ -38,6 +38,18 @@
#define flush_kernel_dcache_range(start,size) \
flush_kernel_dcache_range_asm((start), (start)+(size));
+/* vmap range flushes and invalidates. Architecturally, we don't need
+ * the invalidate, because the CPU should refuse to speculate once an
+ * area has been flushed, so invalidate is left empty */
+static inline void flush_kernel_vmap_range(void *vaddr, int size)
+{
+ unsigned long start = (unsigned long)vaddr;
+
+ flush_kernel_dcache_range_asm(start, start + size);
+}
+static inline void invalidate_kernel_vmap_range(void *vaddr, int size)
+{
+}
#define flush_cache_vmap(start, end) flush_cache_all()
#define flush_cache_vunmap(start, end) flush_cache_all()
diff --git a/arch/parisc/kernel/pci.c b/arch/parisc/kernel/pci.c
index 9e74bfe..38372e7 100644
--- a/arch/parisc/kernel/pci.c
+++ b/arch/parisc/kernel/pci.c
@@ -257,10 +257,10 @@
* Since we are just checking candidates, don't use any fields other
* than res->start.
*/
-void pcibios_align_resource(void *data, struct resource *res,
+resource_size_t pcibios_align_resource(void *data, const struct resource *res,
resource_size_t size, resource_size_t alignment)
{
- resource_size_t mask, align;
+ resource_size_t mask, align, start = res->start;
DBG_RES("pcibios_align_resource(%s, (%p) [%lx,%lx]/%x, 0x%lx, 0x%lx)\n",
pci_name(((struct pci_dev *) data)),
@@ -272,10 +272,10 @@
/* Align to largest of MIN or input size */
mask = max(alignment, align) - 1;
- res->start += mask;
- res->start &= ~mask;
+ start += mask;
+ start &= ~mask;
- /* The caller updates the end field, we don't. */
+ return start;
}
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index ba3948c..50c9af4 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -173,6 +173,7 @@
config OF
def_bool y
+ select OF_FLATTREE
config PPC_UDBG_16550
bool
diff --git a/arch/powerpc/include/asm/prom.h b/arch/powerpc/include/asm/prom.h
index 2ab9cbd..ddd408a 100644
--- a/arch/powerpc/include/asm/prom.h
+++ b/arch/powerpc/include/asm/prom.h
@@ -23,21 +23,8 @@
#include <asm/irq.h>
#include <asm/atomic.h>
-#define OF_ROOT_NODE_ADDR_CELLS_DEFAULT 1
-#define OF_ROOT_NODE_SIZE_CELLS_DEFAULT 1
-
-#define of_compat_cmp(s1, s2, l) strcasecmp((s1), (s2))
-#define of_prop_cmp(s1, s2) strcmp((s1), (s2))
-#define of_node_cmp(s1, s2) strcasecmp((s1), (s2))
-
-extern struct device_node *of_chosen;
-
#define HAVE_ARCH_DEVTREE_FIXUPS
-/* For updating the device tree at runtime */
-extern void of_attach_node(struct device_node *);
-extern void of_detach_node(struct device_node *);
-
#ifdef CONFIG_PPC32
/*
* PCI <-> OF matching functions
@@ -52,11 +39,6 @@
extern void pci_create_OF_bus_map(void);
#endif
-extern struct resource *request_OF_resource(struct device_node* node,
- int index, const char* name_postfix);
-extern int release_OF_resource(struct device_node* node, int index);
-
-
/*
* OF address retreival & translation
*/
diff --git a/arch/powerpc/kernel/of_platform.c b/arch/powerpc/kernel/of_platform.c
index 1a4fc0d..666d08d 100644
--- a/arch/powerpc/kernel/of_platform.c
+++ b/arch/powerpc/kernel/of_platform.c
@@ -214,7 +214,7 @@
static int of_dev_phandle_match(struct device *dev, void *data)
{
phandle *ph = data;
- return to_of_device(dev)->node->linux_phandle == *ph;
+ return to_of_device(dev)->node->phandle == *ph;
}
struct of_device *of_find_device_by_phandle(phandle ph)
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index cadbed6..2597f95 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -1047,10 +1047,8 @@
struct pci_dev *dev = bus->self;
- for (i = 0; i < PCI_BUS_NUM_RESOURCES; ++i) {
- if ((res = bus->resource[i]) == NULL)
- continue;
- if (!res->flags)
+ pci_bus_for_each_resource(bus, res, i) {
+ if (!res || !res->flags)
continue;
if (i >= 3 && bus->self->transparent)
continue;
@@ -1181,21 +1179,20 @@
* but we want to try to avoid allocating at 0x2900-0x2bff
* which might have be mirrored at 0x0100-0x03ff..
*/
-void pcibios_align_resource(void *data, struct resource *res,
+resource_size_t pcibios_align_resource(void *data, const struct resource *res,
resource_size_t size, resource_size_t align)
{
struct pci_dev *dev = data;
+ resource_size_t start = res->start;
if (res->flags & IORESOURCE_IO) {
- resource_size_t start = res->start;
-
if (skip_isa_ioresource_align(dev))
- return;
- if (start & 0x300) {
+ return start;
+ if (start & 0x300)
start = (start + 0x3ff) & ~0x3ff;
- res->start = start;
- }
}
+
+ return start;
}
EXPORT_SYMBOL(pcibios_align_resource);
@@ -1278,9 +1275,8 @@
pr_debug("PCI: Allocating bus resources for %04x:%02x...\n",
pci_domain_nr(bus), bus->number);
- for (i = 0; i < PCI_BUS_NUM_RESOURCES; ++i) {
- if ((res = bus->resource[i]) == NULL || !res->flags
- || res->start > res->end || res->parent)
+ pci_bus_for_each_resource(bus, res, i) {
+ if (!res || !res->flags || res->start > res->end || res->parent)
continue;
if (bus->parent == NULL)
pr = (res->flags & IORESOURCE_IO) ?
diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c
index ccf56ac..d43fc65 100644
--- a/arch/powerpc/kernel/pci_64.c
+++ b/arch/powerpc/kernel/pci_64.c
@@ -224,7 +224,7 @@
* G5 machines... So when something asks for bus 0 io base
* (bus 0 is HT root), we return the AGP one instead.
*/
- if (in_bus == 0 && machine_is_compatible("MacRISC4")) {
+ if (in_bus == 0 && of_machine_is_compatible("MacRISC4")) {
struct device_node *agp;
agp = of_find_compatible_node(NULL, NULL, "u3-agp");
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index 4ec3008..43238b2 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -61,365 +61,12 @@
#define DBG(fmt...)
#endif
-
-static int __initdata dt_root_addr_cells;
-static int __initdata dt_root_size_cells;
-
#ifdef CONFIG_PPC64
int __initdata iommu_is_off;
int __initdata iommu_force_on;
unsigned long tce_alloc_start, tce_alloc_end;
#endif
-typedef u32 cell_t;
-
-#if 0
-static struct boot_param_header *initial_boot_params __initdata;
-#else
-struct boot_param_header *initial_boot_params;
-#endif
-
-extern struct device_node *allnodes; /* temporary while merging */
-
-extern rwlock_t devtree_lock; /* temporary while merging */
-
-/* export that to outside world */
-struct device_node *of_chosen;
-
-static inline char *find_flat_dt_string(u32 offset)
-{
- return ((char *)initial_boot_params) +
- initial_boot_params->off_dt_strings + offset;
-}
-
-/**
- * This function is used to scan the flattened device-tree, it is
- * used to extract the memory informations at boot before we can
- * unflatten the tree
- */
-int __init of_scan_flat_dt(int (*it)(unsigned long node,
- const char *uname, int depth,
- void *data),
- void *data)
-{
- unsigned long p = ((unsigned long)initial_boot_params) +
- initial_boot_params->off_dt_struct;
- int rc = 0;
- int depth = -1;
-
- do {
- u32 tag = *((u32 *)p);
- char *pathp;
-
- p += 4;
- if (tag == OF_DT_END_NODE) {
- depth --;
- continue;
- }
- if (tag == OF_DT_NOP)
- continue;
- if (tag == OF_DT_END)
- break;
- if (tag == OF_DT_PROP) {
- u32 sz = *((u32 *)p);
- p += 8;
- if (initial_boot_params->version < 0x10)
- p = _ALIGN(p, sz >= 8 ? 8 : 4);
- p += sz;
- p = _ALIGN(p, 4);
- continue;
- }
- if (tag != OF_DT_BEGIN_NODE) {
- printk(KERN_WARNING "Invalid tag %x scanning flattened"
- " device tree !\n", tag);
- return -EINVAL;
- }
- depth++;
- pathp = (char *)p;
- p = _ALIGN(p + strlen(pathp) + 1, 4);
- if ((*pathp) == '/') {
- char *lp, *np;
- for (lp = NULL, np = pathp; *np; np++)
- if ((*np) == '/')
- lp = np+1;
- if (lp != NULL)
- pathp = lp;
- }
- rc = it(p, pathp, depth, data);
- if (rc != 0)
- break;
- } while(1);
-
- return rc;
-}
-
-unsigned long __init of_get_flat_dt_root(void)
-{
- unsigned long p = ((unsigned long)initial_boot_params) +
- initial_boot_params->off_dt_struct;
-
- while(*((u32 *)p) == OF_DT_NOP)
- p += 4;
- BUG_ON (*((u32 *)p) != OF_DT_BEGIN_NODE);
- p += 4;
- return _ALIGN(p + strlen((char *)p) + 1, 4);
-}
-
-/**
- * This function can be used within scan_flattened_dt callback to get
- * access to properties
- */
-void* __init of_get_flat_dt_prop(unsigned long node, const char *name,
- unsigned long *size)
-{
- unsigned long p = node;
-
- do {
- u32 tag = *((u32 *)p);
- u32 sz, noff;
- const char *nstr;
-
- p += 4;
- if (tag == OF_DT_NOP)
- continue;
- if (tag != OF_DT_PROP)
- return NULL;
-
- sz = *((u32 *)p);
- noff = *((u32 *)(p + 4));
- p += 8;
- if (initial_boot_params->version < 0x10)
- p = _ALIGN(p, sz >= 8 ? 8 : 4);
-
- nstr = find_flat_dt_string(noff);
- if (nstr == NULL) {
- printk(KERN_WARNING "Can't find property index"
- " name !\n");
- return NULL;
- }
- if (strcmp(name, nstr) == 0) {
- if (size)
- *size = sz;
- return (void *)p;
- }
- p += sz;
- p = _ALIGN(p, 4);
- } while(1);
-}
-
-int __init of_flat_dt_is_compatible(unsigned long node, const char *compat)
-{
- const char* cp;
- unsigned long cplen, l;
-
- cp = of_get_flat_dt_prop(node, "compatible", &cplen);
- if (cp == NULL)
- return 0;
- while (cplen > 0) {
- if (strncasecmp(cp, compat, strlen(compat)) == 0)
- return 1;
- l = strlen(cp) + 1;
- cp += l;
- cplen -= l;
- }
-
- return 0;
-}
-
-static void *__init unflatten_dt_alloc(unsigned long *mem, unsigned long size,
- unsigned long align)
-{
- void *res;
-
- *mem = _ALIGN(*mem, align);
- res = (void *)*mem;
- *mem += size;
-
- return res;
-}
-
-static unsigned long __init unflatten_dt_node(unsigned long mem,
- unsigned long *p,
- struct device_node *dad,
- struct device_node ***allnextpp,
- unsigned long fpsize)
-{
- struct device_node *np;
- struct property *pp, **prev_pp = NULL;
- char *pathp;
- u32 tag;
- unsigned int l, allocl;
- int has_name = 0;
- int new_format = 0;
-
- tag = *((u32 *)(*p));
- if (tag != OF_DT_BEGIN_NODE) {
- printk("Weird tag at start of node: %x\n", tag);
- return mem;
- }
- *p += 4;
- pathp = (char *)*p;
- l = allocl = strlen(pathp) + 1;
- *p = _ALIGN(*p + l, 4);
-
- /* version 0x10 has a more compact unit name here instead of the full
- * path. we accumulate the full path size using "fpsize", we'll rebuild
- * it later. We detect this because the first character of the name is
- * not '/'.
- */
- if ((*pathp) != '/') {
- new_format = 1;
- if (fpsize == 0) {
- /* root node: special case. fpsize accounts for path
- * plus terminating zero. root node only has '/', so
- * fpsize should be 2, but we want to avoid the first
- * level nodes to have two '/' so we use fpsize 1 here
- */
- fpsize = 1;
- allocl = 2;
- } else {
- /* account for '/' and path size minus terminal 0
- * already in 'l'
- */
- fpsize += l;
- allocl = fpsize;
- }
- }
-
-
- np = unflatten_dt_alloc(&mem, sizeof(struct device_node) + allocl,
- __alignof__(struct device_node));
- if (allnextpp) {
- memset(np, 0, sizeof(*np));
- np->full_name = ((char*)np) + sizeof(struct device_node);
- if (new_format) {
- char *p = np->full_name;
- /* rebuild full path for new format */
- if (dad && dad->parent) {
- strcpy(p, dad->full_name);
-#ifdef DEBUG
- if ((strlen(p) + l + 1) != allocl) {
- DBG("%s: p: %d, l: %d, a: %d\n",
- pathp, (int)strlen(p), l, allocl);
- }
-#endif
- p += strlen(p);
- }
- *(p++) = '/';
- memcpy(p, pathp, l);
- } else
- memcpy(np->full_name, pathp, l);
- prev_pp = &np->properties;
- **allnextpp = np;
- *allnextpp = &np->allnext;
- if (dad != NULL) {
- np->parent = dad;
- /* we temporarily use the next field as `last_child'*/
- if (dad->next == 0)
- dad->child = np;
- else
- dad->next->sibling = np;
- dad->next = np;
- }
- kref_init(&np->kref);
- }
- while(1) {
- u32 sz, noff;
- char *pname;
-
- tag = *((u32 *)(*p));
- if (tag == OF_DT_NOP) {
- *p += 4;
- continue;
- }
- if (tag != OF_DT_PROP)
- break;
- *p += 4;
- sz = *((u32 *)(*p));
- noff = *((u32 *)((*p) + 4));
- *p += 8;
- if (initial_boot_params->version < 0x10)
- *p = _ALIGN(*p, sz >= 8 ? 8 : 4);
-
- pname = find_flat_dt_string(noff);
- if (pname == NULL) {
- printk("Can't find property name in list !\n");
- break;
- }
- if (strcmp(pname, "name") == 0)
- has_name = 1;
- l = strlen(pname) + 1;
- pp = unflatten_dt_alloc(&mem, sizeof(struct property),
- __alignof__(struct property));
- if (allnextpp) {
- if (strcmp(pname, "linux,phandle") == 0) {
- np->node = *((u32 *)*p);
- if (np->linux_phandle == 0)
- np->linux_phandle = np->node;
- }
- if (strcmp(pname, "ibm,phandle") == 0)
- np->linux_phandle = *((u32 *)*p);
- pp->name = pname;
- pp->length = sz;
- pp->value = (void *)*p;
- *prev_pp = pp;
- prev_pp = &pp->next;
- }
- *p = _ALIGN((*p) + sz, 4);
- }
- /* with version 0x10 we may not have the name property, recreate
- * it here from the unit name if absent
- */
- if (!has_name) {
- char *p = pathp, *ps = pathp, *pa = NULL;
- int sz;
-
- while (*p) {
- if ((*p) == '@')
- pa = p;
- if ((*p) == '/')
- ps = p + 1;
- p++;
- }
- if (pa < ps)
- pa = p;
- sz = (pa - ps) + 1;
- pp = unflatten_dt_alloc(&mem, sizeof(struct property) + sz,
- __alignof__(struct property));
- if (allnextpp) {
- pp->name = "name";
- pp->length = sz;
- pp->value = pp + 1;
- *prev_pp = pp;
- prev_pp = &pp->next;
- memcpy(pp->value, ps, sz - 1);
- ((char *)pp->value)[sz - 1] = 0;
- DBG("fixed up name for %s -> %s\n", pathp,
- (char *)pp->value);
- }
- }
- if (allnextpp) {
- *prev_pp = NULL;
- np->name = of_get_property(np, "name", NULL);
- np->type = of_get_property(np, "device_type", NULL);
-
- if (!np->name)
- np->name = "<NULL>";
- if (!np->type)
- np->type = "<NULL>";
- }
- while (tag == OF_DT_BEGIN_NODE) {
- mem = unflatten_dt_node(mem, p, np, allnextpp, fpsize);
- tag = *((u32 *)(*p));
- }
- if (tag != OF_DT_END_NODE) {
- printk("Weird tag at end of node: %x\n", tag);
- return mem;
- }
- *p += 4;
- return mem;
-}
-
static int __init early_parse_mem(char *p)
{
if (!p)
@@ -446,7 +93,7 @@
DBG("-> move_device_tree\n");
start = __pa(initial_boot_params);
- size = initial_boot_params->totalsize;
+ size = be32_to_cpu(initial_boot_params->totalsize);
if ((memory_limit && (start + size) > memory_limit) ||
overlaps_crashkernel(start, size)) {
@@ -459,54 +106,6 @@
DBG("<- move_device_tree\n");
}
-/**
- * unflattens the device-tree passed by the firmware, creating the
- * tree of struct device_node. It also fills the "name" and "type"
- * pointers of the nodes so the normal device-tree walking functions
- * can be used (this used to be done by finish_device_tree)
- */
-void __init unflatten_device_tree(void)
-{
- unsigned long start, mem, size;
- struct device_node **allnextp = &allnodes;
-
- DBG(" -> unflatten_device_tree()\n");
-
- /* First pass, scan for size */
- start = ((unsigned long)initial_boot_params) +
- initial_boot_params->off_dt_struct;
- size = unflatten_dt_node(0, &start, NULL, NULL, 0);
- size = (size | 3) + 1;
-
- DBG(" size is %lx, allocating...\n", size);
-
- /* Allocate memory for the expanded device tree */
- mem = lmb_alloc(size + 4, __alignof__(struct device_node));
- mem = (unsigned long) __va(mem);
-
- ((u32 *)mem)[size / 4] = 0xdeadbeef;
-
- DBG(" unflattening %lx...\n", mem);
-
- /* Second pass, do actual unflattening */
- start = ((unsigned long)initial_boot_params) +
- initial_boot_params->off_dt_struct;
- unflatten_dt_node(mem, &start, NULL, &allnextp, 0);
- if (*((u32 *)start) != OF_DT_END)
- printk(KERN_WARNING "Weird tag at end of tree: %08x\n", *((u32 *)start));
- if (((u32 *)mem)[size / 4] != 0xdeadbeef)
- printk(KERN_WARNING "End of tree marker overwritten: %08x\n",
- ((u32 *)mem)[size / 4] );
- *allnextp = NULL;
-
- /* Get pointer to OF "/chosen" node for use everywhere */
- of_chosen = of_find_node_by_path("/chosen");
- if (of_chosen == NULL)
- of_chosen = of_find_node_by_path("/chosen@0");
-
- DBG(" <- unflatten_device_tree()\n");
-}
-
/*
* ibm,pa-features is a per-cpu property that contains a string of
* attribute descriptors, each of which has a 2 byte header plus up
@@ -763,48 +362,9 @@
return 0;
}
-#ifdef CONFIG_BLK_DEV_INITRD
-static void __init early_init_dt_check_for_initrd(unsigned long node)
-{
- unsigned long l;
- u32 *prop;
-
- DBG("Looking for initrd properties... ");
-
- prop = of_get_flat_dt_prop(node, "linux,initrd-start", &l);
- if (prop) {
- initrd_start = (unsigned long)__va(of_read_ulong(prop, l/4));
-
- prop = of_get_flat_dt_prop(node, "linux,initrd-end", &l);
- if (prop) {
- initrd_end = (unsigned long)
- __va(of_read_ulong(prop, l/4));
- initrd_below_start_ok = 1;
- } else {
- initrd_start = 0;
- }
- }
-
- DBG("initrd_start=0x%lx initrd_end=0x%lx\n", initrd_start, initrd_end);
-}
-#else
-static inline void early_init_dt_check_for_initrd(unsigned long node)
-{
-}
-#endif /* CONFIG_BLK_DEV_INITRD */
-
-static int __init early_init_dt_scan_chosen(unsigned long node,
- const char *uname, int depth, void *data)
+void __init early_init_dt_scan_chosen_arch(unsigned long node)
{
unsigned long *lprop;
- unsigned long l;
- char *p;
-
- DBG("search \"chosen\", depth: %d, uname: %s\n", depth, uname);
-
- if (depth != 1 ||
- (strcmp(uname, "chosen") != 0 && strcmp(uname, "chosen@0") != 0))
- return 0;
#ifdef CONFIG_PPC64
/* check if iommu is forced on or off */
@@ -815,17 +375,17 @@
#endif
/* mem=x on the command line is the preferred mechanism */
- lprop = of_get_flat_dt_prop(node, "linux,memory-limit", NULL);
- if (lprop)
- memory_limit = *lprop;
+ lprop = of_get_flat_dt_prop(node, "linux,memory-limit", NULL);
+ if (lprop)
+ memory_limit = *lprop;
#ifdef CONFIG_PPC64
- lprop = of_get_flat_dt_prop(node, "linux,tce-alloc-start", NULL);
- if (lprop)
- tce_alloc_start = *lprop;
- lprop = of_get_flat_dt_prop(node, "linux,tce-alloc-end", NULL);
- if (lprop)
- tce_alloc_end = *lprop;
+ lprop = of_get_flat_dt_prop(node, "linux,tce-alloc-start", NULL);
+ if (lprop)
+ tce_alloc_start = *lprop;
+ lprop = of_get_flat_dt_prop(node, "linux,tce-alloc-end", NULL);
+ if (lprop)
+ tce_alloc_end = *lprop;
#endif
#ifdef CONFIG_KEXEC
@@ -837,51 +397,6 @@
if (lprop)
crashk_res.end = crashk_res.start + *lprop - 1;
#endif
-
- early_init_dt_check_for_initrd(node);
-
- /* Retreive command line */
- p = of_get_flat_dt_prop(node, "bootargs", &l);
- if (p != NULL && l > 0)
- strlcpy(cmd_line, p, min((int)l, COMMAND_LINE_SIZE));
-
-#ifdef CONFIG_CMDLINE
- if (p == NULL || l == 0 || (l == 1 && (*p) == 0))
- strlcpy(cmd_line, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
-#endif /* CONFIG_CMDLINE */
-
- DBG("Command line is: %s\n", cmd_line);
-
- /* break now */
- return 1;
-}
-
-static int __init early_init_dt_scan_root(unsigned long node,
- const char *uname, int depth, void *data)
-{
- u32 *prop;
-
- if (depth != 0)
- return 0;
-
- prop = of_get_flat_dt_prop(node, "#size-cells", NULL);
- dt_root_size_cells = (prop == NULL) ? 1 : *prop;
- DBG("dt_root_size_cells = %x\n", dt_root_size_cells);
-
- prop = of_get_flat_dt_prop(node, "#address-cells", NULL);
- dt_root_addr_cells = (prop == NULL) ? 2 : *prop;
- DBG("dt_root_addr_cells = %x\n", dt_root_addr_cells);
-
- /* break now */
- return 1;
-}
-
-static u64 __init dt_mem_next_cell(int s, cell_t **cellp)
-{
- cell_t *p = *cellp;
-
- *cellp = p + s;
- return of_read_number(p, s);
}
#ifdef CONFIG_PPC_PSERIES
@@ -893,22 +408,22 @@
*/
static int __init early_init_dt_scan_drconf_memory(unsigned long node)
{
- cell_t *dm, *ls, *usm;
+ __be32 *dm, *ls, *usm;
unsigned long l, n, flags;
u64 base, size, lmb_size;
unsigned int is_kexec_kdump = 0, rngs;
ls = of_get_flat_dt_prop(node, "ibm,lmb-size", &l);
- if (ls == NULL || l < dt_root_size_cells * sizeof(cell_t))
+ if (ls == NULL || l < dt_root_size_cells * sizeof(__be32))
return 0;
lmb_size = dt_mem_next_cell(dt_root_size_cells, &ls);
dm = of_get_flat_dt_prop(node, "ibm,dynamic-memory", &l);
- if (dm == NULL || l < sizeof(cell_t))
+ if (dm == NULL || l < sizeof(__be32))
return 0;
n = *dm++; /* number of entries */
- if (l < (n * (dt_root_addr_cells + 4) + 1) * sizeof(cell_t))
+ if (l < (n * (dt_root_addr_cells + 4) + 1) * sizeof(__be32))
return 0;
/* check if this is a kexec/kdump kernel. */
@@ -963,66 +478,48 @@
#define early_init_dt_scan_drconf_memory(node) 0
#endif /* CONFIG_PPC_PSERIES */
-static int __init early_init_dt_scan_memory(unsigned long node,
- const char *uname, int depth, void *data)
+static int __init early_init_dt_scan_memory_ppc(unsigned long node,
+ const char *uname,
+ int depth, void *data)
{
- char *type = of_get_flat_dt_prop(node, "device_type", NULL);
- cell_t *reg, *endp;
- unsigned long l;
-
- /* Look for the ibm,dynamic-reconfiguration-memory node */
if (depth == 1 &&
strcmp(uname, "ibm,dynamic-reconfiguration-memory") == 0)
return early_init_dt_scan_drconf_memory(node);
-
- /* We are scanning "memory" nodes only */
- if (type == NULL) {
- /*
- * The longtrail doesn't have a device_type on the
- * /memory node, so look for the node called /memory@0.
- */
- if (depth != 1 || strcmp(uname, "memory@0") != 0)
- return 0;
- } else if (strcmp(type, "memory") != 0)
- return 0;
-
- reg = of_get_flat_dt_prop(node, "linux,usable-memory", &l);
- if (reg == NULL)
- reg = of_get_flat_dt_prop(node, "reg", &l);
- if (reg == NULL)
- return 0;
-
- endp = reg + (l / sizeof(cell_t));
-
- DBG("memory scan node %s, reg size %ld, data: %x %x %x %x,\n",
- uname, l, reg[0], reg[1], reg[2], reg[3]);
-
- while ((endp - reg) >= (dt_root_addr_cells + dt_root_size_cells)) {
- u64 base, size;
-
- base = dt_mem_next_cell(dt_root_addr_cells, ®);
- size = dt_mem_next_cell(dt_root_size_cells, ®);
-
- if (size == 0)
- continue;
- DBG(" - %llx , %llx\n", (unsigned long long)base,
- (unsigned long long)size);
-#ifdef CONFIG_PPC64
- if (iommu_is_off) {
- if (base >= 0x80000000ul)
- continue;
- if ((base + size) > 0x80000000ul)
- size = 0x80000000ul - base;
- }
-#endif
- lmb_add(base, size);
-
- memstart_addr = min((u64)memstart_addr, base);
- }
-
- return 0;
+
+ return early_init_dt_scan_memory(node, uname, depth, data);
}
+void __init early_init_dt_add_memory_arch(u64 base, u64 size)
+{
+#if defined(CONFIG_PPC64)
+ if (iommu_is_off) {
+ if (base >= 0x80000000ul)
+ return;
+ if ((base + size) > 0x80000000ul)
+ size = 0x80000000ul - base;
+ }
+#endif
+
+ lmb_add(base, size);
+
+ memstart_addr = min((u64)memstart_addr, base);
+}
+
+u64 __init early_init_dt_alloc_memory_arch(u64 size, u64 align)
+{
+ return lmb_alloc(size, align);
+}
+
+#ifdef CONFIG_BLK_DEV_INITRD
+void __init early_init_dt_setup_initrd_arch(unsigned long start,
+ unsigned long end)
+{
+ initrd_start = (unsigned long)__va(start);
+ initrd_end = (unsigned long)__va(end);
+ initrd_below_start_ok = 1;
+}
+#endif
+
static void __init early_reserve_mem(void)
{
u64 base, size;
@@ -1186,7 +683,7 @@
/* Scan memory nodes and rebuild LMBs */
lmb_init();
of_scan_flat_dt(early_init_dt_scan_root, NULL);
- of_scan_flat_dt(early_init_dt_scan_memory, NULL);
+ of_scan_flat_dt(early_init_dt_scan_memory_ppc, NULL);
/* Save command line for /proc/cmdline and then parse parameters */
strlcpy(boot_command_line, cmd_line, COMMAND_LINE_SIZE);
@@ -1234,25 +731,6 @@
DBG(" <- early_init_devtree()\n");
}
-
-/**
- * Indicates whether the root node has a given value in its
- * compatible property.
- */
-int machine_is_compatible(const char *compat)
-{
- struct device_node *root;
- int rc = 0;
-
- root = of_find_node_by_path("/");
- if (root) {
- rc = of_device_is_compatible(root, compat);
- of_node_put(root);
- }
- return rc;
-}
-EXPORT_SYMBOL(machine_is_compatible);
-
/*******
*
* New implementation of the OF "find" APIs, return a refcounted
@@ -1265,27 +743,6 @@
*******/
/**
- * of_find_node_by_phandle - Find a node given a phandle
- * @handle: phandle of the node to find
- *
- * Returns a node pointer with refcount incremented, use
- * of_node_put() on it when done.
- */
-struct device_node *of_find_node_by_phandle(phandle handle)
-{
- struct device_node *np;
-
- read_lock(&devtree_lock);
- for (np = allnodes; np != 0; np = np->allnext)
- if (np->linux_phandle == handle)
- break;
- of_node_get(np);
- read_unlock(&devtree_lock);
- return np;
-}
-EXPORT_SYMBOL(of_find_node_by_phandle);
-
-/**
* of_find_next_cache_node - Find a node's subsidiary cache
* @np: node of type "cpu" or "cache"
*
@@ -1316,138 +773,6 @@
return NULL;
}
-/**
- * of_node_get - Increment refcount of a node
- * @node: Node to inc refcount, NULL is supported to
- * simplify writing of callers
- *
- * Returns node.
- */
-struct device_node *of_node_get(struct device_node *node)
-{
- if (node)
- kref_get(&node->kref);
- return node;
-}
-EXPORT_SYMBOL(of_node_get);
-
-static inline struct device_node * kref_to_device_node(struct kref *kref)
-{
- return container_of(kref, struct device_node, kref);
-}
-
-/**
- * of_node_release - release a dynamically allocated node
- * @kref: kref element of the node to be released
- *
- * In of_node_put() this function is passed to kref_put()
- * as the destructor.
- */
-static void of_node_release(struct kref *kref)
-{
- struct device_node *node = kref_to_device_node(kref);
- struct property *prop = node->properties;
-
- /* We should never be releasing nodes that haven't been detached. */
- if (!of_node_check_flag(node, OF_DETACHED)) {
- printk("WARNING: Bad of_node_put() on %s\n", node->full_name);
- dump_stack();
- kref_init(&node->kref);
- return;
- }
-
- if (!of_node_check_flag(node, OF_DYNAMIC))
- return;
-
- while (prop) {
- struct property *next = prop->next;
- kfree(prop->name);
- kfree(prop->value);
- kfree(prop);
- prop = next;
-
- if (!prop) {
- prop = node->deadprops;
- node->deadprops = NULL;
- }
- }
- kfree(node->full_name);
- kfree(node->data);
- kfree(node);
-}
-
-/**
- * of_node_put - Decrement refcount of a node
- * @node: Node to dec refcount, NULL is supported to
- * simplify writing of callers
- *
- */
-void of_node_put(struct device_node *node)
-{
- if (node)
- kref_put(&node->kref, of_node_release);
-}
-EXPORT_SYMBOL(of_node_put);
-
-/*
- * Plug a device node into the tree and global list.
- */
-void of_attach_node(struct device_node *np)
-{
- unsigned long flags;
-
- write_lock_irqsave(&devtree_lock, flags);
- np->sibling = np->parent->child;
- np->allnext = allnodes;
- np->parent->child = np;
- allnodes = np;
- write_unlock_irqrestore(&devtree_lock, flags);
-}
-
-/*
- * "Unplug" a node from the device tree. The caller must hold
- * a reference to the node. The memory associated with the node
- * is not freed until its refcount goes to zero.
- */
-void of_detach_node(struct device_node *np)
-{
- struct device_node *parent;
- unsigned long flags;
-
- write_lock_irqsave(&devtree_lock, flags);
-
- parent = np->parent;
- if (!parent)
- goto out_unlock;
-
- if (allnodes == np)
- allnodes = np->allnext;
- else {
- struct device_node *prev;
- for (prev = allnodes;
- prev->allnext != np;
- prev = prev->allnext)
- ;
- prev->allnext = np->allnext;
- }
-
- if (parent->child == np)
- parent->child = np->sibling;
- else {
- struct device_node *prevsib;
- for (prevsib = np->parent->child;
- prevsib->sibling != np;
- prevsib = prevsib->sibling)
- ;
- prevsib->sibling = np->sibling;
- }
-
- of_node_set_flag(np, OF_DETACHED);
-
-out_unlock:
- write_unlock_irqrestore(&devtree_lock, flags);
-}
-
#ifdef CONFIG_PPC_PSERIES
/*
* Fix up the uninitialized fields in a new device node:
@@ -1479,9 +804,9 @@
if (machine_is(powermac))
return -ENODEV;
- /* fix up new node's linux_phandle field */
+ /* fix up new node's phandle field */
if ((ibm_phandle = of_get_property(node, "ibm,phandle", NULL)))
- node->linux_phandle = *ibm_phandle;
+ node->phandle = *ibm_phandle;
out:
of_node_put(parent);
@@ -1520,120 +845,6 @@
__initcall(prom_reconfig_setup);
#endif
-/*
- * Add a property to a node
- */
-int prom_add_property(struct device_node* np, struct property* prop)
-{
- struct property **next;
- unsigned long flags;
-
- prop->next = NULL;
- write_lock_irqsave(&devtree_lock, flags);
- next = &np->properties;
- while (*next) {
- if (strcmp(prop->name, (*next)->name) == 0) {
- /* duplicate ! don't insert it */
- write_unlock_irqrestore(&devtree_lock, flags);
- return -1;
- }
- next = &(*next)->next;
- }
- *next = prop;
- write_unlock_irqrestore(&devtree_lock, flags);
-
-#ifdef CONFIG_PROC_DEVICETREE
- /* try to add to proc as well if it was initialized */
- if (np->pde)
- proc_device_tree_add_prop(np->pde, prop);
-#endif /* CONFIG_PROC_DEVICETREE */
-
- return 0;
-}
-
-/*
- * Remove a property from a node. Note that we don't actually
- * remove it, since we have given out who-knows-how-many pointers
- * to the data using get-property. Instead we just move the property
- * to the "dead properties" list, so it won't be found any more.
- */
-int prom_remove_property(struct device_node *np, struct property *prop)
-{
- struct property **next;
- unsigned long flags;
- int found = 0;
-
- write_lock_irqsave(&devtree_lock, flags);
- next = &np->properties;
- while (*next) {
- if (*next == prop) {
- /* found the node */
- *next = prop->next;
- prop->next = np->deadprops;
- np->deadprops = prop;
- found = 1;
- break;
- }
- next = &(*next)->next;
- }
- write_unlock_irqrestore(&devtree_lock, flags);
-
- if (!found)
- return -ENODEV;
-
-#ifdef CONFIG_PROC_DEVICETREE
- /* try to remove the proc node as well */
- if (np->pde)
- proc_device_tree_remove_prop(np->pde, prop);
-#endif /* CONFIG_PROC_DEVICETREE */
-
- return 0;
-}
-
-/*
- * Update a property in a node. Note that we don't actually
- * remove it, since we have given out who-knows-how-many pointers
- * to the data using get-property. Instead we just move the property
- * to the "dead properties" list, and add the new property to the
- * property list
- */
-int prom_update_property(struct device_node *np,
- struct property *newprop,
- struct property *oldprop)
-{
- struct property **next;
- unsigned long flags;
- int found = 0;
-
- write_lock_irqsave(&devtree_lock, flags);
- next = &np->properties;
- while (*next) {
- if (*next == oldprop) {
- /* found the node */
- newprop->next = oldprop->next;
- *next = newprop;
- oldprop->next = np->deadprops;
- np->deadprops = oldprop;
- found = 1;
- break;
- }
- next = &(*next)->next;
- }
- write_unlock_irqrestore(&devtree_lock, flags);
-
- if (!found)
- return -ENODEV;
-
-#ifdef CONFIG_PROC_DEVICETREE
- /* try to add to proc as well if it was initialized */
- if (np->pde)
- proc_device_tree_update_prop(np->pde, newprop, oldprop);
-#endif /* CONFIG_PROC_DEVICETREE */
-
- return 0;
-}
-
-
/* Find the device node for a given logical cpu number, also returns the cpu
* local thread number (index in ibm,interrupt-server#s) if relevant and
* asked for (non NULL)
diff --git a/arch/powerpc/platforms/85xx/xes_mpc85xx.c b/arch/powerpc/platforms/85xx/xes_mpc85xx.c
index 1b42605..0125604 100644
--- a/arch/powerpc/platforms/85xx/xes_mpc85xx.c
+++ b/arch/powerpc/platforms/85xx/xes_mpc85xx.c
@@ -80,8 +80,8 @@
printk(KERN_INFO "xes_mpc85xx: Enabling L2 as cache\n");
ctl = MPC85xx_L2CTL_L2E | MPC85xx_L2CTL_L2I;
- if (machine_is_compatible("MPC8540") ||
- machine_is_compatible("MPC8560"))
+ if (of_machine_is_compatible("MPC8540") ||
+ of_machine_is_compatible("MPC8560"))
/*
* Assume L2 SRAM is used fully for cache, so set
* L2BLKSZ (bits 4:5) to match L2SIZ (bits 2:3).
diff --git a/arch/powerpc/platforms/cell/cbe_powerbutton.c b/arch/powerpc/platforms/cell/cbe_powerbutton.c
index dcddaa5..f75a4da 100644
--- a/arch/powerpc/platforms/cell/cbe_powerbutton.c
+++ b/arch/powerpc/platforms/cell/cbe_powerbutton.c
@@ -48,7 +48,7 @@
int ret = 0;
struct input_dev *dev;
- if (!machine_is_compatible("IBM,CBPLUS-1.0")) {
+ if (!of_machine_is_compatible("IBM,CBPLUS-1.0")) {
printk(KERN_ERR "%s: Not a cell blade.\n", __func__);
ret = -ENODEV;
goto out;
diff --git a/arch/powerpc/platforms/cell/ras.c b/arch/powerpc/platforms/cell/ras.c
index 5e0a191..608fd2b 100644
--- a/arch/powerpc/platforms/cell/ras.c
+++ b/arch/powerpc/platforms/cell/ras.c
@@ -255,7 +255,7 @@
{
struct cbe_pmd_regs __iomem *regs;
- sysreset_hack = machine_is_compatible("IBM,CBPLUS-1.0");
+ sysreset_hack = of_machine_is_compatible("IBM,CBPLUS-1.0");
if (!sysreset_hack)
return 0;
diff --git a/arch/powerpc/platforms/cell/spu_manage.c b/arch/powerpc/platforms/cell/spu_manage.c
index 4c506c1..891f18e 100644
--- a/arch/powerpc/platforms/cell/spu_manage.c
+++ b/arch/powerpc/platforms/cell/spu_manage.c
@@ -457,7 +457,7 @@
continue;
vic_handles = of_get_property(spu_dn, "vicinity", &lenp);
for (i=0; i < (lenp / sizeof(phandle)); i++) {
- if (vic_handles[i] == target->linux_phandle)
+ if (vic_handles[i] == target->phandle)
return spu;
}
}
@@ -499,7 +499,7 @@
if (strcmp(name, "spe") == 0) {
spu = devnode_spu(cbe, vic_dn);
- avoid_ph = last_spu_dn->linux_phandle;
+ avoid_ph = last_spu_dn->phandle;
} else {
/*
* "mic-tm" and "bif0" nodes do not have
@@ -514,7 +514,7 @@
last_spu->has_mem_affinity = 1;
spu->has_mem_affinity = 1;
}
- avoid_ph = vic_dn->linux_phandle;
+ avoid_ph = vic_dn->phandle;
}
list_add_tail(&spu->aff_list, &last_spu->aff_list);
diff --git a/arch/powerpc/platforms/fsl_uli1575.c b/arch/powerpc/platforms/fsl_uli1575.c
index fd23a1d..8b0c208 100644
--- a/arch/powerpc/platforms/fsl_uli1575.c
+++ b/arch/powerpc/platforms/fsl_uli1575.c
@@ -222,6 +222,7 @@
int i;
u8 *dummy;
struct pci_bus *bus = dev->bus;
+ struct resource *res;
resource_size_t end = 0;
for (i = PCI_BRIDGE_RESOURCES; i < PCI_BRIDGE_RESOURCES+3; i++) {
@@ -230,13 +231,12 @@
end = pci_resource_end(dev, i);
}
- for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) {
- if ((bus->resource[i]) &&
- (bus->resource[i]->flags & IORESOURCE_MEM)) {
- if (bus->resource[i]->end == end)
- dummy = ioremap(bus->resource[i]->start, 0x4);
+ pci_bus_for_each_resource(bus, res, i) {
+ if (res && res->flags & IORESOURCE_MEM) {
+ if (res->end == end)
+ dummy = ioremap(res->start, 0x4);
else
- dummy = ioremap(bus->resource[i]->end - 3, 0x4);
+ dummy = ioremap(res->end - 3, 0x4);
if (dummy) {
in_8(dummy);
iounmap(dummy);
diff --git a/arch/powerpc/platforms/pasemi/cpufreq.c b/arch/powerpc/platforms/pasemi/cpufreq.c
index be2527a..d35e052 100644
--- a/arch/powerpc/platforms/pasemi/cpufreq.c
+++ b/arch/powerpc/platforms/pasemi/cpufreq.c
@@ -304,8 +304,8 @@
static int __init pas_cpufreq_init(void)
{
- if (!machine_is_compatible("PA6T-1682M") &&
- !machine_is_compatible("pasemi,pwrficient"))
+ if (!of_machine_is_compatible("PA6T-1682M") &&
+ !of_machine_is_compatible("pasemi,pwrficient"))
return -ENODEV;
return cpufreq_register_driver(&pas_cpufreq_driver);
diff --git a/arch/powerpc/platforms/powermac/cpufreq_32.c b/arch/powerpc/platforms/powermac/cpufreq_32.c
index 08d94e4..d4f127d 100644
--- a/arch/powerpc/platforms/powermac/cpufreq_32.c
+++ b/arch/powerpc/platforms/powermac/cpufreq_32.c
@@ -657,31 +657,31 @@
cur_freq = (*value) / 1000;
/* Check for 7447A based MacRISC3 */
- if (machine_is_compatible("MacRISC3") &&
+ if (of_machine_is_compatible("MacRISC3") &&
of_get_property(cpunode, "dynamic-power-step", NULL) &&
PVR_VER(mfspr(SPRN_PVR)) == 0x8003) {
pmac_cpufreq_init_7447A(cpunode);
/* Check for other MacRISC3 machines */
- } else if (machine_is_compatible("PowerBook3,4") ||
- machine_is_compatible("PowerBook3,5") ||
- machine_is_compatible("MacRISC3")) {
+ } else if (of_machine_is_compatible("PowerBook3,4") ||
+ of_machine_is_compatible("PowerBook3,5") ||
+ of_machine_is_compatible("MacRISC3")) {
pmac_cpufreq_init_MacRISC3(cpunode);
/* Else check for iBook2 500/600 */
- } else if (machine_is_compatible("PowerBook4,1")) {
+ } else if (of_machine_is_compatible("PowerBook4,1")) {
hi_freq = cur_freq;
low_freq = 400000;
set_speed_proc = pmu_set_cpu_speed;
is_pmu_based = 1;
}
/* Else check for TiPb 550 */
- else if (machine_is_compatible("PowerBook3,3") && cur_freq == 550000) {
+ else if (of_machine_is_compatible("PowerBook3,3") && cur_freq == 550000) {
hi_freq = cur_freq;
low_freq = 500000;
set_speed_proc = pmu_set_cpu_speed;
is_pmu_based = 1;
}
/* Else check for TiPb 400 & 500 */
- else if (machine_is_compatible("PowerBook3,2")) {
+ else if (of_machine_is_compatible("PowerBook3,2")) {
/* We only know about the 400 MHz and the 500Mhz model
* they both have 300 MHz as low frequency
*/
diff --git a/arch/powerpc/platforms/powermac/cpufreq_64.c b/arch/powerpc/platforms/powermac/cpufreq_64.c
index 708c751..3ed288e 100644
--- a/arch/powerpc/platforms/powermac/cpufreq_64.c
+++ b/arch/powerpc/platforms/powermac/cpufreq_64.c
@@ -398,11 +398,11 @@
int rc = -ENODEV;
/* Check supported platforms */
- if (machine_is_compatible("PowerMac8,1") ||
- machine_is_compatible("PowerMac8,2") ||
- machine_is_compatible("PowerMac9,1"))
+ if (of_machine_is_compatible("PowerMac8,1") ||
+ of_machine_is_compatible("PowerMac8,2") ||
+ of_machine_is_compatible("PowerMac9,1"))
use_volts_smu = 1;
- else if (machine_is_compatible("PowerMac11,2"))
+ else if (of_machine_is_compatible("PowerMac11,2"))
use_volts_vdnap = 1;
else
return -ENODEV;
@@ -729,9 +729,9 @@
return -ENODEV;
}
- if (machine_is_compatible("PowerMac7,2") ||
- machine_is_compatible("PowerMac7,3") ||
- machine_is_compatible("RackMac3,1"))
+ if (of_machine_is_compatible("PowerMac7,2") ||
+ of_machine_is_compatible("PowerMac7,3") ||
+ of_machine_is_compatible("RackMac3,1"))
rc = g5_pm72_cpufreq_init(cpus);
#ifdef CONFIG_PMAC_SMU
else
diff --git a/arch/powerpc/platforms/powermac/feature.c b/arch/powerpc/platforms/powermac/feature.c
index fbc9bbd..33e815f 100644
--- a/arch/powerpc/platforms/powermac/feature.c
+++ b/arch/powerpc/platforms/powermac/feature.c
@@ -2426,7 +2426,7 @@
}
}
for(i=0; i<ARRAY_SIZE(pmac_mb_defs); i++) {
- if (machine_is_compatible(pmac_mb_defs[i].model_string)) {
+ if (of_machine_is_compatible(pmac_mb_defs[i].model_string)) {
pmac_mb = pmac_mb_defs[i];
goto found;
}
diff --git a/arch/powerpc/platforms/powermac/pfunc_core.c b/arch/powerpc/platforms/powermac/pfunc_core.c
index 96d5ce5..ede49e7 100644
--- a/arch/powerpc/platforms/powermac/pfunc_core.c
+++ b/arch/powerpc/platforms/powermac/pfunc_core.c
@@ -842,7 +842,7 @@
list_for_each_entry(func, &dev->functions, link) {
if (name && strcmp(name, func->name))
continue;
- if (func->phandle && target->node != func->phandle)
+ if (func->phandle && target->phandle != func->phandle)
continue;
if ((func->flags & flags) == 0)
continue;
diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c
index b40c22d..6898e82 100644
--- a/arch/powerpc/platforms/powermac/smp.c
+++ b/arch/powerpc/platforms/powermac/smp.c
@@ -693,9 +693,9 @@
#ifdef CONFIG_PPC64
/* i2c based HW sync on some G5s */
- if (machine_is_compatible("PowerMac7,2") ||
- machine_is_compatible("PowerMac7,3") ||
- machine_is_compatible("RackMac3,1"))
+ if (of_machine_is_compatible("PowerMac7,2") ||
+ of_machine_is_compatible("PowerMac7,3") ||
+ of_machine_is_compatible("RackMac3,1"))
smp_core99_setup_i2c_hwsync(ncpus);
/* pfunc based HW sync on recent G5s */
@@ -713,7 +713,7 @@
#else /* CONFIG_PPC64 */
/* GPIO based HW sync on ppc32 Core99 */
- if (pmac_tb_freeze == NULL && !machine_is_compatible("MacRISC4")) {
+ if (pmac_tb_freeze == NULL && !of_machine_is_compatible("MacRISC4")) {
struct device_node *cpu;
const u32 *tbprop = NULL;
@@ -750,7 +750,7 @@
#endif
/* 32 bits SMP can't NAP */
- if (!machine_is_compatible("MacRISC4"))
+ if (!of_machine_is_compatible("MacRISC4"))
powersave_nap = 0;
}
@@ -852,7 +852,7 @@
/* If we didn't start the second CPU, we must take
* it off the bus
*/
- if (machine_is_compatible("MacRISC4") &&
+ if (of_machine_is_compatible("MacRISC4") &&
num_online_cpus() < 2)
g5_phy_disable_cpu1();
#endif /* CONFIG_PPC64 */
diff --git a/arch/powerpc/platforms/powermac/time.c b/arch/powerpc/platforms/powermac/time.c
index 1810e42..48211ca 100644
--- a/arch/powerpc/platforms/powermac/time.c
+++ b/arch/powerpc/platforms/powermac/time.c
@@ -317,9 +317,9 @@
* calibration. That's better since the VIA itself seems
* to be slightly off. --BenH
*/
- if (!machine_is_compatible("MacRISC2") &&
- !machine_is_compatible("MacRISC3") &&
- !machine_is_compatible("MacRISC4"))
+ if (!of_machine_is_compatible("MacRISC2") &&
+ !of_machine_is_compatible("MacRISC3") &&
+ !of_machine_is_compatible("MacRISC4"))
if (via_calibrate_decr())
return;
@@ -328,7 +328,7 @@
* probably implement calibration based on the KL timer on these
* machines anyway... -BenH
*/
- if (machine_is_compatible("PowerMac3,5"))
+ if (of_machine_is_compatible("PowerMac3,5"))
if (via_calibrate_decr())
return;
#endif
diff --git a/arch/powerpc/platforms/powermac/udbg_scc.c b/arch/powerpc/platforms/powermac/udbg_scc.c
index 9490157..d83135a9 100644
--- a/arch/powerpc/platforms/powermac/udbg_scc.c
+++ b/arch/powerpc/platforms/powermac/udbg_scc.c
@@ -132,9 +132,9 @@
scc_inittab[1] = in_8(sccc);
out_8(sccc, 12);
scc_inittab[3] = in_8(sccc);
- } else if (machine_is_compatible("RackMac1,1")
- || machine_is_compatible("RackMac1,2")
- || machine_is_compatible("MacRISC4")) {
+ } else if (of_machine_is_compatible("RackMac1,1")
+ || of_machine_is_compatible("RackMac1,2")
+ || of_machine_is_compatible("MacRISC4")) {
/* Xserves and G5s default to 57600 */
scc_inittab[1] = 0;
scc_inittab[3] = 0;
diff --git a/arch/powerpc/sysdev/grackle.c b/arch/powerpc/sysdev/grackle.c
index 5da37c2..cf27df6 100644
--- a/arch/powerpc/sysdev/grackle.c
+++ b/arch/powerpc/sysdev/grackle.c
@@ -56,9 +56,9 @@
void __init setup_grackle(struct pci_controller *hose)
{
setup_indirect_pci(hose, 0xfec00000, 0xfee00000, 0);
- if (machine_is_compatible("PowerMac1,1"))
+ if (of_machine_is_compatible("PowerMac1,1"))
ppc_pci_add_flags(PPC_PCI_REASSIGN_ALL_BUS);
- if (machine_is_compatible("AAPL,PowerBook1998"))
+ if (of_machine_is_compatible("AAPL,PowerBook1998"))
grackle_set_loop_snoop(hose, 1);
#if 0 /* Disabled for now, HW problems ??? */
grackle_set_stg(hose, 1);
diff --git a/arch/s390/crypto/aes_s390.c b/arch/s390/crypto/aes_s390.c
index 6be4503..58f4673 100644
--- a/arch/s390/crypto/aes_s390.c
+++ b/arch/s390/crypto/aes_s390.c
@@ -78,14 +78,14 @@
struct s390_aes_ctx *sctx = crypto_tfm_ctx(tfm);
int ret;
- sctx->fallback.blk->base.crt_flags &= ~CRYPTO_TFM_REQ_MASK;
- sctx->fallback.blk->base.crt_flags |= (tfm->crt_flags &
+ sctx->fallback.cip->base.crt_flags &= ~CRYPTO_TFM_REQ_MASK;
+ sctx->fallback.cip->base.crt_flags |= (tfm->crt_flags &
CRYPTO_TFM_REQ_MASK);
ret = crypto_cipher_setkey(sctx->fallback.cip, in_key, key_len);
if (ret) {
tfm->crt_flags &= ~CRYPTO_TFM_RES_MASK;
- tfm->crt_flags |= (sctx->fallback.blk->base.crt_flags &
+ tfm->crt_flags |= (sctx->fallback.cip->base.crt_flags &
CRYPTO_TFM_RES_MASK);
}
return ret;
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 2121fbb..05cef50 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -13,7 +13,6 @@
select HAVE_LMB
select HAVE_OPROFILE
select HAVE_GENERIC_DMA_COHERENT
- select HAVE_IOREMAP_PROT if MMU
select HAVE_ARCH_TRACEHOOK
select HAVE_DMA_API_DEBUG
select HAVE_DMA_ATTRS
@@ -22,6 +21,7 @@
select HAVE_KERNEL_GZIP
select HAVE_KERNEL_BZIP2
select HAVE_KERNEL_LZMA
+ select HAVE_KERNEL_LZO
select HAVE_SYSCALL_TRACEPOINTS
select RTC_LIB
select GENERIC_ATOMIC64
@@ -35,6 +35,7 @@
def_bool ARCH = "sh"
select HAVE_KPROBES
select HAVE_KRETPROBES
+ select HAVE_IOREMAP_PROT if MMU && !X2TLB
select HAVE_FUNCTION_TRACER
select HAVE_FTRACE_MCOUNT_RECORD
select HAVE_DYNAMIC_FTRACE
@@ -42,6 +43,8 @@
select HAVE_FTRACE_NMI_ENTER if DYNAMIC_FTRACE
select HAVE_FUNCTION_GRAPH_TRACER
select HAVE_ARCH_KGDB
+ select HAVE_HW_BREAKPOINT
+ select PERF_EVENTS if HAVE_HW_BREAKPOINT
select ARCH_HIBERNATION_POSSIBLE if MMU
config SUPERH64
@@ -78,12 +81,13 @@
config GENERIC_HARDIRQS_NO__DO_IRQ
def_bool y
-config GENERIC_IRQ_PROBE
- def_bool y
-
config IRQ_PER_CPU
def_bool y
+config SPARSE_IRQ
+ def_bool y
+ depends on SUPERH32
+
config GENERIC_GPIO
def_bool n
@@ -548,8 +552,7 @@
CPU_SUBTYPE_SH7203 || \
CPU_SUBTYPE_SH7206 || \
CPU_SUBTYPE_SH7263 || \
- CPU_SUBTYPE_MXG || \
- CPU_SUBTYPE_SH7786
+ CPU_SUBTYPE_MXG
default "60000000" if CPU_SUBTYPE_SH7751 || CPU_SUBTYPE_SH7751R
default "66000000" if CPU_SUBTYPE_SH4_202
default "50000000"
@@ -563,7 +566,8 @@
config SH_CLK_CPG_LEGACY
depends on SH_CLK_CPG
- def_bool y if !CPU_SUBTYPE_SH7785 && !ARCH_SHMOBILE
+ def_bool y if !CPU_SUBTYPE_SH7785 && !ARCH_SHMOBILE && \
+ !CPU_SUBTYPE_SH7786
config SH_CLK_MD
int "CPU Mode Pin Setting"
@@ -725,18 +729,6 @@
LLSC, this should be more efficient than the other alternative of
disabling interrupts around the atomic sequence.
-config SPARSE_IRQ
- bool "Support sparse irq numbering"
- depends on EXPERIMENTAL
- help
- This enables support for sparse irqs. This is useful in general
- as most CPUs have a fairly sparse array of IRQ vectors, which
- the irq_desc then maps directly on to. Systems with a high
- number of off-chip IRQs will want to treat this as
- experimental until they have been independently verified.
-
- If you don't know what to do here, say N.
-
endmenu
menu "Boot options"
@@ -822,11 +814,15 @@
config PCI
bool "PCI support"
depends on SYS_SUPPORTS_PCI
+ select PCI_DOMAINS
help
Find out whether you have a PCI motherboard. PCI is the name of a
bus system, i.e. the way the CPU talks to the other stuff inside
your box. If you have PCI, say Y, otherwise N.
+config PCI_DOMAINS
+ bool
+
source "drivers/pci/pcie/Kconfig"
source "drivers/pci/Kconfig"
diff --git a/arch/sh/Kconfig.cpu b/arch/sh/Kconfig.cpu
index cd6e3ea..ddf096c 100644
--- a/arch/sh/Kconfig.cpu
+++ b/arch/sh/Kconfig.cpu
@@ -68,7 +68,8 @@
config SPECULATIVE_EXECUTION
bool "Speculative subroutine return"
- depends on CPU_SUBTYPE_SH7780 && EXPERIMENTAL
+ depends on EXPERIMENTAL
+ depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785 || CPU_SUBTYPE_SH7786
help
This enables support for a speculative instruction fetch for
subroutine return. There are various pitfalls associated with
diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index db91925..588579a 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -83,6 +83,7 @@
defaultimage-$(CONFIG_SH_7724_SOLUTION_ENGINE) := uImage
defaultimage-$(CONFIG_SH_7206_SOLUTION_ENGINE) := vmlinux
defaultimage-$(CONFIG_SH_7619_SOLUTION_ENGINE) := vmlinux
+defaultimage-$(CONFIG_SH_SDK7786) := vmlinux.bin
# Set some sensible Kbuild defaults
KBUILD_IMAGE := $(defaultimage-y)
@@ -143,11 +144,11 @@
machdir-$(CONFIG_SH_KFR2R09) += mach-kfr2r09
machdir-$(CONFIG_SH_ECOVEC) += mach-ecovec24
machdir-$(CONFIG_SH_SDK7780) += mach-sdk7780
+machdir-$(CONFIG_SH_SDK7786) += mach-sdk7786
machdir-$(CONFIG_SH_X3PROTO) += mach-x3proto
machdir-$(CONFIG_SH_SH7763RDP) += mach-sh7763rdp
machdir-$(CONFIG_SH_SH4202_MICRODEV) += mach-microdev
machdir-$(CONFIG_SH_LANDISK) += mach-landisk
-machdir-$(CONFIG_SH_TITAN) += mach-titan
machdir-$(CONFIG_SH_LBOX_RE2) += mach-lboxre2
machdir-$(CONFIG_SH_CAYMAN) += mach-cayman
machdir-$(CONFIG_SH_RSK) += mach-rsk
@@ -203,8 +204,9 @@
libs-$(CONFIG_SUPERH32) := arch/sh/lib/ $(libs-y)
libs-$(CONFIG_SUPERH64) := arch/sh/lib64/ $(libs-y)
-BOOT_TARGETS = uImage uImage.bz2 uImage.gz uImage.lzma uImage.srec uImage.bin \
- zImage vmlinux.srec romImage
+BOOT_TARGETS = uImage uImage.bz2 uImage.gz uImage.lzma uImage.lzo \
+ uImage.srec uImage.bin zImage vmlinux.bin vmlinux.srec \
+ romImage
PHONY += $(BOOT_TARGETS)
all: $(KBUILD_IMAGE)
@@ -225,10 +227,12 @@
@echo ' zImage - Compressed kernel image'
@echo ' romImage - Compressed ROM image, if supported'
@echo ' vmlinux.srec - Create an ELF S-record'
+ @echo ' vmlinux.bin - Create an uncompressed binary image'
@echo '* uImage - Alias to bootable U-Boot image'
@echo ' uImage.srec - Create an S-record for U-Boot'
@echo ' uImage.bin - Kernel-only image for U-Boot (bin)'
@echo '* uImage.gz - Kernel-only image for U-Boot (gzip)'
@echo ' uImage.bz2 - Kernel-only image for U-Boot (bzip2)'
@echo ' uImage.lzma - Kernel-only image for U-Boot (lzma)'
+ @echo ' uImage.lzo - Kernel-only image for U-Boot (lzo)'
endef
diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig
index aedd9de..938e87d 100644
--- a/arch/sh/boards/Kconfig
+++ b/arch/sh/boards/Kconfig
@@ -150,6 +150,14 @@
Select SDK7780 if configuring for a Renesas SH7780 SDK7780R3
evaluation board.
+config SH_SDK7786
+ bool "SDK7786"
+ depends on CPU_SUBTYPE_SH7786
+ select SYS_SUPPORTS_PCI
+ help
+ Select SDK7786 if configuring for a Renesas Technology Europe
+ SH7786-65nm board.
+
config SH_HIGHLANDER
bool "Highlander"
depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
diff --git a/arch/sh/boards/Makefile b/arch/sh/boards/Makefile
index ce0f263..4f90f9b 100644
--- a/arch/sh/boards/Makefile
+++ b/arch/sh/boards/Makefile
@@ -8,3 +8,4 @@
obj-$(CONFIG_SH_EDOSK7760) += board-edosk7760.o
obj-$(CONFIG_SH_ESPT) += board-espt.o
obj-$(CONFIG_SH_POLARIS) += board-polaris.o
+obj-$(CONFIG_SH_TITAN) += board-titan.o
diff --git a/arch/sh/boards/board-magicpanelr2.c b/arch/sh/boards/board-magicpanelr2.c
index 99ffc5f..efba450 100644
--- a/arch/sh/boards/board-magicpanelr2.c
+++ b/arch/sh/boards/board-magicpanelr2.c
@@ -23,7 +23,7 @@
#include <asm/heartbeat.h>
#include <cpu/sh7720.h>
-#define LAN9115_READY (ctrl_inl(0xA8000084UL) & 0x00000001UL)
+#define LAN9115_READY (__raw_readl(0xA8000084UL) & 0x00000001UL)
/* Prefer cmdline over RedBoot */
static const char *probes[] = { "cmdlinepart", "RedBoot", NULL };
@@ -60,33 +60,33 @@
{
/* CS2: LAN (0x08000000 - 0x0bffffff) */
/* no idle cycles, normal space, 8 bit data bus */
- ctrl_outl(0x36db0400, CS2BCR);
+ __raw_writel(0x36db0400, CS2BCR);
/* (SW:1.5 WR:3 HW:1.5), ext. wait */
- ctrl_outl(0x000003c0, CS2WCR);
+ __raw_writel(0x000003c0, CS2WCR);
/* CS4: CAN1 (0xb0000000 - 0xb3ffffff) */
/* no idle cycles, normal space, 8 bit data bus */
- ctrl_outl(0x00000200, CS4BCR);
+ __raw_writel(0x00000200, CS4BCR);
/* (SW:1.5 WR:3 HW:1.5), ext. wait */
- ctrl_outl(0x00100981, CS4WCR);
+ __raw_writel(0x00100981, CS4WCR);
/* CS5a: CAN2 (0xb4000000 - 0xb5ffffff) */
/* no idle cycles, normal space, 8 bit data bus */
- ctrl_outl(0x00000200, CS5ABCR);
+ __raw_writel(0x00000200, CS5ABCR);
/* (SW:1.5 WR:3 HW:1.5), ext. wait */
- ctrl_outl(0x00100981, CS5AWCR);
+ __raw_writel(0x00100981, CS5AWCR);
/* CS5b: CAN3 (0xb6000000 - 0xb7ffffff) */
/* no idle cycles, normal space, 8 bit data bus */
- ctrl_outl(0x00000200, CS5BBCR);
+ __raw_writel(0x00000200, CS5BBCR);
/* (SW:1.5 WR:3 HW:1.5), ext. wait */
- ctrl_outl(0x00100981, CS5BWCR);
+ __raw_writel(0x00100981, CS5BWCR);
/* CS6a: Rotary (0xb8000000 - 0xb9ffffff) */
/* no idle cycles, normal space, 8 bit data bus */
- ctrl_outl(0x00000200, CS6ABCR);
+ __raw_writel(0x00000200, CS6ABCR);
/* (SW:1.5 WR:3 HW:1.5), no ext. wait */
- ctrl_outl(0x001009C1, CS6AWCR);
+ __raw_writel(0x001009C1, CS6AWCR);
}
static void __init setup_port_multiplexing(void)
@@ -94,71 +94,71 @@
/* A7 GPO(LED8); A6 GPO(LED7); A5 GPO(LED6); A4 GPO(LED5);
* A3 GPO(LED4); A2 GPO(LED3); A1 GPO(LED2); A0 GPO(LED1);
*/
- ctrl_outw(0x5555, PORT_PACR); /* 01 01 01 01 01 01 01 01 */
+ __raw_writew(0x5555, PORT_PACR); /* 01 01 01 01 01 01 01 01 */
/* B7 GPO(RST4); B6 GPO(RST3); B5 GPO(RST2); B4 GPO(RST1);
* B3 GPO(PB3); B2 GPO(PB2); B1 GPO(PB1); B0 GPO(PB0);
*/
- ctrl_outw(0x5555, PORT_PBCR); /* 01 01 01 01 01 01 01 01 */
+ __raw_writew(0x5555, PORT_PBCR); /* 01 01 01 01 01 01 01 01 */
/* C7 GPO(PC7); C6 GPO(PC6); C5 GPO(PC5); C4 GPO(PC4);
* C3 LCD_DATA3; C2 LCD_DATA2; C1 LCD_DATA1; C0 LCD_DATA0;
*/
- ctrl_outw(0x5500, PORT_PCCR); /* 01 01 01 01 00 00 00 00 */
+ __raw_writew(0x5500, PORT_PCCR); /* 01 01 01 01 00 00 00 00 */
/* D7 GPO(PD7); D6 GPO(PD6); D5 GPO(PD5); D4 GPO(PD4);
* D3 GPO(PD3); D2 GPO(PD2); D1 GPO(PD1); D0 GPO(PD0);
*/
- ctrl_outw(0x5555, PORT_PDCR); /* 01 01 01 01 01 01 01 01 */
+ __raw_writew(0x5555, PORT_PDCR); /* 01 01 01 01 01 01 01 01 */
/* E7 (x); E6 GPI(nu); E5 GPI(nu); E4 LCD_M_DISP;
* E3 LCD_CL1; E2 LCD_CL2; E1 LCD_DON; E0 LCD_FLM;
*/
- ctrl_outw(0x3C00, PORT_PECR); /* 00 11 11 00 00 00 00 00 */
+ __raw_writew(0x3C00, PORT_PECR); /* 00 11 11 00 00 00 00 00 */
/* F7 (x); F6 DA1(VLCD); F5 DA0(nc); F4 AN3;
* F3 AN2(MID_AD); F2 AN1(EARTH_AD); F1 AN0(TEMP); F0 GPI+(nc);
*/
- ctrl_outw(0x0002, PORT_PFCR); /* 00 00 00 00 00 00 00 10 */
+ __raw_writew(0x0002, PORT_PFCR); /* 00 00 00 00 00 00 00 10 */
/* G7 (x); G6 IRQ5(TOUCH_BUSY); G5 IRQ4(TOUCH_IRQ); G4 GPI(KEY2);
* G3 GPI(KEY1); G2 GPO(LED11); G1 GPO(LED10); G0 GPO(LED9);
*/
- ctrl_outw(0x03D5, PORT_PGCR); /* 00 00 00 11 11 01 01 01 */
+ __raw_writew(0x03D5, PORT_PGCR); /* 00 00 00 11 11 01 01 01 */
/* H7 (x); H6 /RAS(BRAS); H5 /CAS(BCAS); H4 CKE(BCKE);
* H3 GPO(EARTH_OFF); H2 GPO(EARTH_TEST); H1 USB2_PWR; H0 USB1_PWR;
*/
- ctrl_outw(0x0050, PORT_PHCR); /* 00 00 00 00 01 01 00 00 */
+ __raw_writew(0x0050, PORT_PHCR); /* 00 00 00 00 01 01 00 00 */
/* J7 (x); J6 AUDCK; J5 ASEBRKAK; J4 AUDATA3;
* J3 AUDATA2; J2 AUDATA1; J1 AUDATA0; J0 AUDSYNC;
*/
- ctrl_outw(0x0000, PORT_PJCR); /* 00 00 00 00 00 00 00 00 */
+ __raw_writew(0x0000, PORT_PJCR); /* 00 00 00 00 00 00 00 00 */
/* K7 (x); K6 (x); K5 (x); K4 (x);
* K3 PINT7(/PWR2); K2 PINT6(/PWR1); K1 PINT5(nu); K0 PINT4(FLASH_READY)
*/
- ctrl_outw(0x00FF, PORT_PKCR); /* 00 00 00 00 11 11 11 11 */
+ __raw_writew(0x00FF, PORT_PKCR); /* 00 00 00 00 11 11 11 11 */
/* L7 TRST; L6 TMS; L5 TDO; L4 TDI;
* L3 TCK; L2 (x); L1 (x); L0 (x);
*/
- ctrl_outw(0x0000, PORT_PLCR); /* 00 00 00 00 00 00 00 00 */
+ __raw_writew(0x0000, PORT_PLCR); /* 00 00 00 00 00 00 00 00 */
/* M7 GPO(CURRENT_SINK); M6 GPO(PWR_SWITCH); M5 GPO(LAN_SPEED);
* M4 GPO(LAN_RESET); M3 GPO(BUZZER); M2 GPO(LCD_BL);
* M1 CS5B(CAN3_CS); M0 GPI+(nc);
*/
- ctrl_outw(0x5552, PORT_PMCR); /* 01 01 01 01 01 01 00 10 */
+ __raw_writew(0x5552, PORT_PMCR); /* 01 01 01 01 01 01 00 10 */
/* CURRENT_SINK=off, PWR_SWITCH=off, LAN_SPEED=100MBit,
* LAN_RESET=off, BUZZER=off, LCD_BL=off
*/
#if CONFIG_SH_MAGIC_PANEL_R2_VERSION == 2
- ctrl_outb(0x30, PORT_PMDR);
+ __raw_writeb(0x30, PORT_PMDR);
#elif CONFIG_SH_MAGIC_PANEL_R2_VERSION == 3
- ctrl_outb(0xF0, PORT_PMDR);
+ __raw_writeb(0xF0, PORT_PMDR);
#else
#error Unknown revision of PLATFORM_MP_R2
#endif
@@ -167,8 +167,8 @@
* P4 GPO(nu); P3 IRQ3(LAN_IRQ); P2 IRQ2(CAN3_IRQ);
* P1 IRQ1(CAN2_IRQ); P0 IRQ0(CAN1_IRQ)
*/
- ctrl_outw(0x0100, PORT_PPCR); /* 00 00 00 01 00 00 00 00 */
- ctrl_outb(0x10, PORT_PPDR);
+ __raw_writew(0x0100, PORT_PPCR); /* 00 00 00 01 00 00 00 00 */
+ __raw_writeb(0x10, PORT_PPDR);
/* R7 A25; R6 A24; R5 A23; R4 A22;
* R3 A21; R2 A20; R1 A19; R0 A0;
@@ -185,22 +185,22 @@
/* S7 (x); S6 (x); S5 (x); S4 GPO(EEPROM_CS2);
* S3 GPO(EEPROM_CS1); S2 SIOF0_TXD; S1 SIOF0_RXD; S0 SIOF0_SCK;
*/
- ctrl_outw(0x0140, PORT_PSCR); /* 00 00 00 01 01 00 00 00 */
+ __raw_writew(0x0140, PORT_PSCR); /* 00 00 00 01 01 00 00 00 */
/* T7 (x); T6 (x); T5 (x); T4 COM1_CTS;
* T3 COM1_RTS; T2 COM1_TXD; T1 COM1_RXD; T0 GPO(WDOG)
*/
- ctrl_outw(0x0001, PORT_PTCR); /* 00 00 00 00 00 00 00 01 */
+ __raw_writew(0x0001, PORT_PTCR); /* 00 00 00 00 00 00 00 01 */
/* U7 (x); U6 (x); U5 (x); U4 GPI+(/AC_FAULT);
* U3 GPO(TOUCH_CS); U2 TOUCH_TXD; U1 TOUCH_RXD; U0 TOUCH_SCK;
*/
- ctrl_outw(0x0240, PORT_PUCR); /* 00 00 00 10 01 00 00 00 */
+ __raw_writew(0x0240, PORT_PUCR); /* 00 00 00 10 01 00 00 00 */
/* V7 (x); V6 (x); V5 (x); V4 GPO(MID2);
* V3 GPO(MID1); V2 CARD_TxD; V1 CARD_RxD; V0 GPI+(/BAT_FAULT);
*/
- ctrl_outw(0x0142, PORT_PVCR); /* 00 00 00 01 01 00 00 10 */
+ __raw_writew(0x0142, PORT_PVCR); /* 00 00 00 01 01 00 00 10 */
}
static void __init mpr2_setup(char **cmdline_p)
@@ -209,24 +209,24 @@
* /PCC_CD1, /PCC_CD2, PCC_BVD1, PCC_BVD2,
* /IOIS16, IRQ4, IRQ5, USB1d_SUSPEND
*/
- ctrl_outw(0xAABC, PORT_PSELA);
+ __raw_writew(0xAABC, PORT_PSELA);
/* set Pin Select Register B:
* /SCIF0_RTS, /SCIF0_CTS, LCD_VCPWC,
* LCD_VEPWC, IIC_SDA, IIC_SCL, Reserved
*/
- ctrl_outw(0x3C00, PORT_PSELB);
+ __raw_writew(0x3C00, PORT_PSELB);
/* set Pin Select Register C:
* SIOF1_SCK, SIOF1_RxD, SCIF1_RxD, SCIF1_TxD, Reserved
*/
- ctrl_outw(0x0000, PORT_PSELC);
+ __raw_writew(0x0000, PORT_PSELC);
/* set Pin Select Register D: Reserved, SIOF1_TxD, Reserved, SIOF1_MCLK,
* Reserved, SIOF1_SYNC, Reserved, SCIF1_SCK, Reserved
*/
- ctrl_outw(0x0000, PORT_PSELD);
+ __raw_writew(0x0000, PORT_PSELD);
/* set USB TxRx Control: Reserved, DRV, Reserved, USB_TRANS, USB_SEL */
- ctrl_outw(0x0101, PORT_UTRCTL);
+ __raw_writew(0x0101, PORT_UTRCTL);
/* set USB Clock Control: USSCS, USSTB, Reserved (HighByte always A5) */
- ctrl_outw(0xA5C0, PORT_UCLKCR_W);
+ __raw_writew(0xA5C0, PORT_UCLKCR_W);
setup_chip_select();
diff --git a/arch/sh/boards/board-polaris.c b/arch/sh/boards/board-polaris.c
index 62607eb..5948663 100644
--- a/arch/sh/boards/board-polaris.c
+++ b/arch/sh/boards/board-polaris.c
@@ -59,15 +59,12 @@
static struct heartbeat_data heartbeat_data = {
.bit_pos = heartbeat_bit_pos,
.nr_bits = ARRAY_SIZE(heartbeat_bit_pos),
- .regsize = 8,
};
-static struct resource heartbeat_resources[] = {
- [0] = {
- .start = PORT_PCDR,
- .end = PORT_PCDR,
- .flags = IORESOURCE_MEM,
- },
+static struct resource heartbeat_resource = {
+ .start = PORT_PCDR,
+ .end = PORT_PCDR,
+ .flags = IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
};
static struct platform_device heartbeat_device = {
@@ -76,8 +73,8 @@
.dev = {
.platform_data = &heartbeat_data,
},
- .num_resources = ARRAY_SIZE(heartbeat_resources),
- .resource = heartbeat_resources,
+ .num_resources = 1,
+ .resource = &heartbeat_resource,
};
static struct platform_device *polaris_devices[] __initdata = {
@@ -92,15 +89,15 @@
printk(KERN_INFO "Configuring Polaris external bus\n");
/* Configure area 5 with 2 wait states */
- wcr = ctrl_inw(WCR2);
+ wcr = __raw_readw(WCR2);
wcr &= (~AREA5_WAIT_CTRL);
wcr |= (WAIT_STATES_10 << 10);
- ctrl_outw(wcr, WCR2);
+ __raw_writew(wcr, WCR2);
/* Configure area 5 for 32-bit access */
- bcr_mask = ctrl_inw(BCR2);
+ bcr_mask = __raw_readw(BCR2);
bcr_mask |= 1 << 10;
- ctrl_outw(bcr_mask, BCR2);
+ __raw_writew(bcr_mask, BCR2);
return platform_add_devices(polaris_devices,
ARRAY_SIZE(polaris_devices));
@@ -131,13 +128,13 @@
static void __init init_polaris_irq(void)
{
/* Disable all interrupts */
- ctrl_outw(0, BCR_ILCRA);
- ctrl_outw(0, BCR_ILCRB);
- ctrl_outw(0, BCR_ILCRC);
- ctrl_outw(0, BCR_ILCRD);
- ctrl_outw(0, BCR_ILCRE);
- ctrl_outw(0, BCR_ILCRF);
- ctrl_outw(0, BCR_ILCRG);
+ __raw_writew(0, BCR_ILCRA);
+ __raw_writew(0, BCR_ILCRB);
+ __raw_writew(0, BCR_ILCRC);
+ __raw_writew(0, BCR_ILCRD);
+ __raw_writew(0, BCR_ILCRE);
+ __raw_writew(0, BCR_ILCRF);
+ __raw_writew(0, BCR_ILCRG);
register_ipr_controller(&ipr_irq_desc);
}
diff --git a/arch/sh/boards/board-sh7785lcr.c b/arch/sh/boards/board-sh7785lcr.c
index e5a8a2f..fe7e686 100644
--- a/arch/sh/boards/board-sh7785lcr.c
+++ b/arch/sh/boards/board-sh7785lcr.c
@@ -21,6 +21,7 @@
#include <linux/i2c-algo-pca.h>
#include <linux/usb/r8a66597.h>
#include <linux/irq.h>
+#include <linux/io.h>
#include <linux/clk.h>
#include <linux/errno.h>
#include <mach/sh7785lcr.h>
@@ -32,26 +33,17 @@
* NOTE: This board has 2 physical memory maps.
* Please look at include/asm-sh/sh7785lcr.h or hardware manual.
*/
-static struct resource heartbeat_resources[] = {
- [0] = {
- .start = PLD_LEDCR,
- .end = PLD_LEDCR,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct heartbeat_data heartbeat_data = {
- .regsize = 8,
+static struct resource heartbeat_resource = {
+ .start = PLD_LEDCR,
+ .end = PLD_LEDCR,
+ .flags = IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
};
static struct platform_device heartbeat_device = {
.name = "heartbeat",
.id = -1,
- .dev = {
- .platform_data = &heartbeat_data,
- },
- .num_resources = ARRAY_SIZE(heartbeat_resources),
- .resource = heartbeat_resources,
+ .num_resources = 1,
+ .resource = &heartbeat_resource,
};
static struct mtd_partition nor_flash_partitions[] = {
@@ -341,8 +333,14 @@
pm_power_off = sh7785lcr_power_off;
/* sm501 DRAM configuration */
- sm501_reg = (void __iomem *)0xb3e00000 + SM501_DRAM_CONTROL;
- writel(0x000307c2, sm501_reg);
+ sm501_reg = ioremap_nocache(SM107_REG_ADDR, SM501_DRAM_CONTROL);
+ if (!sm501_reg) {
+ printk(KERN_ERR "%s: ioremap error.\n", __func__);
+ return;
+ }
+
+ writel(0x000307c2, sm501_reg + SM501_DRAM_CONTROL);
+ iounmap(sm501_reg);
}
/* Return the board specific boot mode pin configuration */
diff --git a/arch/sh/boards/board-shmin.c b/arch/sh/boards/board-shmin.c
index b1dcbbc..325bed5 100644
--- a/arch/sh/boards/board-shmin.c
+++ b/arch/sh/boards/board-shmin.c
@@ -17,8 +17,8 @@
static void __init init_shmin_irq(void)
{
- ctrl_outw(0x2a00, PFC_PHCR); // IRQ0-3=IRQ
- ctrl_outw(0x0aaa, INTC_ICR1); // IRQ0-3=IRQ-mode,Low-active.
+ __raw_writew(0x2a00, PFC_PHCR); // IRQ0-3=IRQ
+ __raw_writew(0x0aaa, INTC_ICR1); // IRQ0-3=IRQ-mode,Low-active.
plat_irq_setup_pins(IRQ_MODE_IRQ);
}
diff --git a/arch/sh/boards/board-titan.c b/arch/sh/boards/board-titan.c
new file mode 100644
index 0000000..94c36c7b
--- /dev/null
+++ b/arch/sh/boards/board-titan.c
@@ -0,0 +1,24 @@
+/*
+ * arch/sh/boards/titan/setup.c - Setup for Titan
+ *
+ * Copyright (C) 2006 Jamie Lenehan
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <mach/titan.h>
+#include <asm/io.h>
+
+static void __init init_titan_irq(void)
+{
+ /* enable individual interrupt mode for externals */
+ plat_irq_setup_pins(IRQ_MODE_IRQ);
+}
+
+static struct sh_machine_vector mv_titan __initmv = {
+ .mv_name = "Titan",
+ .mv_init_irq = init_titan_irq,
+};
diff --git a/arch/sh/boards/board-urquell.c b/arch/sh/boards/board-urquell.c
index 36b8bac..a9bd6e3 100644
--- a/arch/sh/boards/board-urquell.c
+++ b/arch/sh/boards/board-urquell.c
@@ -2,7 +2,7 @@
* Renesas Technology Corp. SH7786 Urquell Support.
*
* Copyright (C) 2008 Kuninori Morimoto <morimoto.kuninori@renesas.com>
- * Copyright (C) 2009 Paul Mundt
+ * Copyright (C) 2009, 2010 Paul Mundt
*
* Based on board-sh7785lcr.c
* Copyright (C) 2008 Yoshihiro Shimoda
@@ -19,6 +19,7 @@
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/irq.h>
+#include <linux/clk.h>
#include <mach/urquell.h>
#include <cpu/sh7786.h>
#include <asm/heartbeat.h>
@@ -50,26 +51,17 @@
*/
/* HeartBeat */
-static struct resource heartbeat_resources[] = {
- [0] = {
- .start = BOARDREG(SLEDR),
- .end = BOARDREG(SLEDR),
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct heartbeat_data heartbeat_data = {
- .regsize = 16,
+static struct resource heartbeat_resource = {
+ .start = BOARDREG(SLEDR),
+ .end = BOARDREG(SLEDR),
+ .flags = IORESOURCE_MEM | IORESOURCE_MEM_16BIT,
};
static struct platform_device heartbeat_device = {
.name = "heartbeat",
.id = -1,
- .dev = {
- .platform_data = &heartbeat_data,
- },
- .num_resources = ARRAY_SIZE(heartbeat_resources),
- .resource = heartbeat_resources,
+ .num_resources = 1,
+ .resource = &heartbeat_resource,
};
/* LAN91C111 */
@@ -184,6 +176,27 @@
return __raw_readw(UBOARDREG(MDSWMR));
}
+static int urquell_clk_init(void)
+{
+ struct clk *clk;
+ int ret;
+
+ /*
+ * Only handle the EXTAL case, anyone interfacing a crystal
+ * resonator will need to provide their own input clock.
+ */
+ if (test_mode_pin(MODE_PIN9))
+ return -EINVAL;
+
+ clk = clk_get(NULL, "extal");
+ if (!clk || IS_ERR(clk))
+ return PTR_ERR(clk);
+ ret = clk_set_rate(clk, 33333333);
+ clk_put(clk);
+
+ return ret;
+}
+
/* Initialize the board */
static void __init urquell_setup(char **cmdline_p)
{
@@ -200,4 +213,5 @@
.mv_setup = urquell_setup,
.mv_init_irq = urquell_init_irq,
.mv_mode_pins = urquell_mode_pins,
+ .mv_clk_init = urquell_clk_init,
};
diff --git a/arch/sh/boards/mach-ap325rxa/setup.c b/arch/sh/boards/mach-ap325rxa/setup.c
index 1f5fa5c..57e37e2 100644
--- a/arch/sh/boards/mach-ap325rxa/setup.c
+++ b/arch/sh/boards/mach-ap325rxa/setup.c
@@ -159,21 +159,21 @@
msleep(100);
/* ASD AP-320/325 LCD ON */
- ctrl_outw(FPGA_LCDREG_VAL, FPGA_LCDREG);
+ __raw_writew(FPGA_LCDREG_VAL, FPGA_LCDREG);
/* backlight */
gpio_set_value(GPIO_PTS3, 0);
- ctrl_outw(0x100, FPGA_BKLREG);
+ __raw_writew(0x100, FPGA_BKLREG);
}
static void ap320_wvga_power_off(void *board_data)
{
/* backlight */
- ctrl_outw(0, FPGA_BKLREG);
+ __raw_writew(0, FPGA_BKLREG);
gpio_set_value(GPIO_PTS3, 1);
/* ASD AP-320/325 LCD OFF */
- ctrl_outw(0, FPGA_LCDREG);
+ __raw_writew(0, FPGA_LCDREG);
}
static struct sh_mobile_lcdc_info lcdc_info = {
@@ -420,7 +420,7 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = 101,
+ .start = 100,
.flags = IORESOURCE_IRQ,
},
};
@@ -443,7 +443,7 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = 24,
+ .start = 23,
.flags = IORESOURCE_IRQ,
},
};
@@ -471,8 +471,8 @@
};
static struct ov772x_camera_info ov7725_info = {
- .buswidth = SOCAM_DATAWIDTH_8,
- .flags = OV772X_FLAG_VFLIP | OV772X_FLAG_HFLIP,
+ .flags = OV772X_FLAG_VFLIP | OV772X_FLAG_HFLIP | \
+ OV772X_FLAG_8BIT,
.edgectrl = OV772X_AUTO_EDGECTRL(0xf, 0),
};
@@ -595,7 +595,7 @@
gpio_request(GPIO_PTZ4, NULL);
gpio_direction_output(GPIO_PTZ4, 0); /* SADDR */
- ctrl_outw(ctrl_inw(PORT_MSELCRB) & ~0x0001, PORT_MSELCRB);
+ __raw_writew(__raw_readw(PORT_MSELCRB) & ~0x0001, PORT_MSELCRB);
/* FLCTL */
gpio_request(GPIO_FN_FCE, NULL);
@@ -613,9 +613,9 @@
gpio_request(GPIO_FN_FWE, NULL);
gpio_request(GPIO_FN_FRB, NULL);
- ctrl_outw(0, PORT_HIZCRC);
- ctrl_outw(0xFFFF, PORT_DRVCRA);
- ctrl_outw(0xFFFF, PORT_DRVCRB);
+ __raw_writew(0, PORT_HIZCRC);
+ __raw_writew(0xFFFF, PORT_DRVCRA);
+ __raw_writew(0xFFFF, PORT_DRVCRB);
platform_resource_setup_memory(&ceu_device, "ceu", 4 << 20);
diff --git a/arch/sh/boards/mach-cayman/irq.c b/arch/sh/boards/mach-cayman/irq.c
index 33f77085..1394b07 100644
--- a/arch/sh/boards/mach-cayman/irq.c
+++ b/arch/sh/boards/mach-cayman/irq.c
@@ -66,9 +66,9 @@
reg = EPLD_MASK_BASE + ((irq / 8) << 2);
bit = 1<<(irq % 8);
local_irq_save(flags);
- mask = ctrl_inl(reg);
+ mask = __raw_readl(reg);
mask |= bit;
- ctrl_outl(mask, reg);
+ __raw_writel(mask, reg);
local_irq_restore(flags);
}
@@ -83,9 +83,9 @@
reg = EPLD_MASK_BASE + ((irq / 8) << 2);
bit = 1<<(irq % 8);
local_irq_save(flags);
- mask = ctrl_inl(reg);
+ mask = __raw_readl(reg);
mask &= ~bit;
- ctrl_outl(mask, reg);
+ __raw_writel(mask, reg);
local_irq_restore(flags);
}
@@ -109,8 +109,8 @@
unsigned long status;
int i;
- status = ctrl_inl(EPLD_STATUS_BASE) &
- ctrl_inl(EPLD_MASK_BASE) & 0xff;
+ status = __raw_readl(EPLD_STATUS_BASE) &
+ __raw_readl(EPLD_MASK_BASE) & 0xff;
if (status == 0) {
irq = -1;
} else {
@@ -126,8 +126,8 @@
unsigned long status;
int i;
- status = ctrl_inl(EPLD_STATUS_BASE + 3 * sizeof(u32)) &
- ctrl_inl(EPLD_MASK_BASE + 3 * sizeof(u32)) & 0xff;
+ status = __raw_readl(EPLD_STATUS_BASE + 3 * sizeof(u32)) &
+ __raw_readl(EPLD_MASK_BASE + 3 * sizeof(u32)) & 0xff;
if (status == 0) {
irq = -1;
} else {
diff --git a/arch/sh/boards/mach-dreamcast/irq.c b/arch/sh/boards/mach-dreamcast/irq.c
index f55fc8e..d932667 100644
--- a/arch/sh/boards/mach-dreamcast/irq.c
+++ b/arch/sh/boards/mach-dreamcast/irq.c
@@ -135,3 +135,30 @@
/* Not reached */
return irq;
}
+
+void systemasic_irq_init(void)
+{
+ int i, nid = cpu_to_node(boot_cpu_data);
+
+ /* Assign all virtual IRQs to the System ASIC int. handler */
+ for (i = HW_EVENT_IRQ_BASE; i < HW_EVENT_IRQ_MAX; i++) {
+ unsigned int irq;
+
+ irq = create_irq_nr(i, nid);
+ if (unlikely(irq == 0)) {
+ pr_err("%s: failed hooking irq %d for systemasic\n",
+ __func__, i);
+ return;
+ }
+
+ if (unlikely(irq != i)) {
+ pr_err("%s: got irq %d but wanted %d, bailing.\n",
+ __func__, irq, i);
+ destroy_irq(irq);
+ return;
+ }
+
+ set_irq_chip_and_handler(i, &systemasic_int,
+ handle_level_irq);
+ }
+}
diff --git a/arch/sh/boards/mach-dreamcast/rtc.c b/arch/sh/boards/mach-dreamcast/rtc.c
index a743368..061d657 100644
--- a/arch/sh/boards/mach-dreamcast/rtc.c
+++ b/arch/sh/boards/mach-dreamcast/rtc.c
@@ -35,11 +35,11 @@
unsigned long val1, val2;
do {
- val1 = ((ctrl_inl(AICA_RTC_SECS_H) & 0xffff) << 16) |
- (ctrl_inl(AICA_RTC_SECS_L) & 0xffff);
+ val1 = ((__raw_readl(AICA_RTC_SECS_H) & 0xffff) << 16) |
+ (__raw_readl(AICA_RTC_SECS_L) & 0xffff);
- val2 = ((ctrl_inl(AICA_RTC_SECS_H) & 0xffff) << 16) |
- (ctrl_inl(AICA_RTC_SECS_L) & 0xffff);
+ val2 = ((__raw_readl(AICA_RTC_SECS_H) & 0xffff) << 16) |
+ (__raw_readl(AICA_RTC_SECS_L) & 0xffff);
} while (val1 != val2);
ts->tv_sec = val1 - TWENTY_YEARS;
@@ -60,14 +60,14 @@
unsigned long adj = secs + TWENTY_YEARS;
do {
- ctrl_outl((adj & 0xffff0000) >> 16, AICA_RTC_SECS_H);
- ctrl_outl((adj & 0xffff), AICA_RTC_SECS_L);
+ __raw_writel((adj & 0xffff0000) >> 16, AICA_RTC_SECS_H);
+ __raw_writel((adj & 0xffff), AICA_RTC_SECS_L);
- val1 = ((ctrl_inl(AICA_RTC_SECS_H) & 0xffff) << 16) |
- (ctrl_inl(AICA_RTC_SECS_L) & 0xffff);
+ val1 = ((__raw_readl(AICA_RTC_SECS_H) & 0xffff) << 16) |
+ (__raw_readl(AICA_RTC_SECS_L) & 0xffff);
- val2 = ((ctrl_inl(AICA_RTC_SECS_H) & 0xffff) << 16) |
- (ctrl_inl(AICA_RTC_SECS_L) & 0xffff);
+ val2 = ((__raw_readl(AICA_RTC_SECS_H) & 0xffff) << 16) |
+ (__raw_readl(AICA_RTC_SECS_L) & 0xffff);
} while (val1 != val2);
return 0;
diff --git a/arch/sh/boards/mach-dreamcast/setup.c b/arch/sh/boards/mach-dreamcast/setup.c
index a4b7402..ad1a4db 100644
--- a/arch/sh/boards/mach-dreamcast/setup.c
+++ b/arch/sh/boards/mach-dreamcast/setup.c
@@ -28,25 +28,8 @@
#include <asm/machvec.h>
#include <mach/sysasic.h>
-extern struct irq_chip systemasic_int;
-extern void aica_time_init(void);
-extern int systemasic_irq_demux(int);
-
static void __init dreamcast_setup(char **cmdline_p)
{
- int i;
-
- /* Mask all hardware events */
- /* XXX */
-
- /* Acknowledge any previous events */
- /* XXX */
-
- /* Assign all virtual IRQs to the System ASIC int. handler */
- for (i = HW_EVENT_IRQ_BASE; i < HW_EVENT_IRQ_MAX; i++)
- set_irq_chip_and_handler(i, &systemasic_int,
- handle_level_irq);
-
board_time_init = aica_time_init;
}
@@ -54,4 +37,5 @@
.mv_name = "Sega Dreamcast",
.mv_setup = dreamcast_setup,
.mv_irq_demux = systemasic_irq_demux,
+ .mv_init_irq = systemasic_irq_init,
};
diff --git a/arch/sh/boards/mach-ecovec24/sdram.S b/arch/sh/boards/mach-ecovec24/sdram.S
index 8334400..3963c6f 100644
--- a/arch/sh/boards/mach-ecovec24/sdram.S
+++ b/arch/sh/boards/mach-ecovec24/sdram.S
@@ -37,6 +37,10 @@
.balign 4
ENTRY(ecovec24_sdram_leave_start)
+ mov.l @(SH_SLEEP_MODE, r5), r0
+ tst #SUSP_SH_RSTANDBY, r0
+ bf resume_rstandby
+
/* DBSC: put memory in auto-refresh mode */
ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
@@ -49,4 +53,59 @@
rts
nop
+resume_rstandby:
+
+ /* DBSC: re-initialize and put in auto-refresh */
+
+ ED 0xFD000108, 0x00000181 /* DBPDCNT0 */
+ ED 0xFD000020, 0x015B0002 /* DBCONF */
+ ED 0xFD000030, 0x03071502 /* DBTR0 */
+ ED 0xFD000034, 0x02020102 /* DBTR1 */
+ ED 0xFD000038, 0x01090405 /* DBTR2 */
+ ED 0xFD00003C, 0x00000002 /* DBTR3 */
+ ED 0xFD000008, 0x00000005 /* DBKIND */
+ ED 0xFD000040, 0x00000001 /* DBRFPDN0 */
+ ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
+ ED 0xFD000018, 0x00000001 /* DBCKECNT */
+
+ mov #100,r0
+WAIT_400NS:
+ dt r0
+ bf WAIT_400NS
+
+ ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
+ ED 0xFD000060, 0x00020000 /* DBMRCNT (EMR2) */
+ ED 0xFD000060, 0x00030000 /* DBMRCNT (EMR3) */
+ ED 0xFD000060, 0x00010004 /* DBMRCNT (EMR) */
+ ED 0xFD000060, 0x00000532 /* DBMRCNT (MRS) */
+ ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
+ ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
+ ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
+ ED 0xFD000060, 0x00000432 /* DBMRCNT (MRS) */
+ ED 0xFD000060, 0x000103c0 /* DBMRCNT (EMR) */
+ ED 0xFD000060, 0x00010040 /* DBMRCNT (EMR) */
+
+ mov #100,r0
+WAIT_400NS_2:
+ dt r0
+ bf WAIT_400NS_2
+
+ ED 0xFD000010, 0x00000001 /* DBEN */
+ ED 0xFD000044, 0x0000050f /* DBRFPDN1 */
+ ED 0xFD000048, 0x236800e6 /* DBRFPDN2 */
+
+ mov.l DUMMY,r0
+ mov.l @r0, r1 /* force single dummy read */
+
+ ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
+ ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
+ ED 0xFD000108, 0x00000080 /* DBPDCNT0 */
+ ED 0xFD000040, 0x00010000 /* DBRFPDN0 */
+
+ rts
+ nop
+
+ .balign 4
+DUMMY: .long 0xac400000
+
ENTRY(ecovec24_sdram_leave_end)
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index 5c24628..39ed872 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -64,18 +64,16 @@
/* Heartbeat */
static unsigned char led_pos[] = { 0, 1, 2, 3 };
+
static struct heartbeat_data heartbeat_data = {
- .regsize = 8,
.nr_bits = 4,
.bit_pos = led_pos,
};
-static struct resource heartbeat_resources[] = {
- [0] = {
- .start = 0xA405012C, /* PTG */
- .end = 0xA405012E - 1,
- .flags = IORESOURCE_MEM,
- },
+static struct resource heartbeat_resource = {
+ .start = 0xA405012C, /* PTG */
+ .end = 0xA405012E - 1,
+ .flags = IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
};
static struct platform_device heartbeat_device = {
@@ -84,8 +82,8 @@
.dev = {
.platform_data = &heartbeat_data,
},
- .num_resources = ARRAY_SIZE(heartbeat_resources),
- .resource = heartbeat_resources,
+ .num_resources = 1,
+ .resource = &heartbeat_resource,
};
/* MTD */
@@ -455,7 +453,7 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = 101,
+ .start = 100,
.flags = IORESOURCE_IRQ,
},
};
@@ -491,7 +489,7 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = 24,
+ .start = 23,
.flags = IORESOURCE_IRQ,
},
};
@@ -698,13 +696,13 @@
#define FCLKBCR 0xa415000c
static void fsimck_init(struct clk *clk)
{
- u32 status = ctrl_inl(clk->enable_reg);
+ u32 status = __raw_readl(clk->enable_reg);
/* use external clock */
status &= ~0x000000ff;
status |= 0x00000080;
- ctrl_outl(status, clk->enable_reg);
+ __raw_writel(status, clk->enable_reg);
}
static struct clk_ops fsimck_clk_ops = {
@@ -753,6 +751,26 @@
},
};
+/* IrDA */
+static struct resource irda_resources[] = {
+ [0] = {
+ .name = "IrDA",
+ .start = 0xA45D0000,
+ .end = 0xA45D0049,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 20,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device irda_device = {
+ .name = "sh_sir",
+ .num_resources = ARRAY_SIZE(irda_resources),
+ .resource = irda_resources,
+};
+
static struct platform_device *ecovec_devices[] __initdata = {
&heartbeat_device,
&nor_flash_device,
@@ -773,8 +791,10 @@
&camera_devices[1],
&camera_devices[2],
&fsi_device,
+ &irda_device,
};
+#ifdef CONFIG_I2C
#define EEPROM_ADDR 0x50
static u8 mac_read(struct i2c_adapter *a, u8 command)
{
@@ -817,6 +837,12 @@
msleep(10);
}
}
+#else
+static void __init sh_eth_init(struct sh_eth_plat_data *pd)
+{
+ pr_err("unable to read sh_eth MAC address\n");
+}
+#endif
#define PORT_HIZA 0xA4050158
#define IODRIVEA 0xA405018A
@@ -831,7 +857,8 @@
struct clk *clk;
/* register board specific self-refresh code */
- sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF,
+ sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF |
+ SUSP_SH_RSTANDBY,
&ecovec24_sdram_enter_start,
&ecovec24_sdram_enter_end,
&ecovec24_sdram_leave_start,
@@ -855,7 +882,7 @@
gpio_direction_output(GPIO_PTG1, 0);
gpio_direction_output(GPIO_PTG2, 0);
gpio_direction_output(GPIO_PTG3, 0);
- ctrl_outw((ctrl_inw(PORT_HIZA) & ~(0x1 << 1)) , PORT_HIZA);
+ __raw_writew((__raw_readw(PORT_HIZA) & ~(0x1 << 1)) , PORT_HIZA);
/* enable SH-Eth */
gpio_request(GPIO_PTA1, NULL);
@@ -875,16 +902,16 @@
gpio_request(GPIO_FN_LNKSTA, NULL);
/* enable USB */
- ctrl_outw(0x0000, 0xA4D80000);
- ctrl_outw(0x0000, 0xA4D90000);
+ __raw_writew(0x0000, 0xA4D80000);
+ __raw_writew(0x0000, 0xA4D90000);
gpio_request(GPIO_PTB3, NULL);
gpio_request(GPIO_PTB4, NULL);
gpio_request(GPIO_PTB5, NULL);
gpio_direction_input(GPIO_PTB3);
gpio_direction_output(GPIO_PTB4, 0);
gpio_direction_output(GPIO_PTB5, 0);
- ctrl_outw(0x0600, 0xa40501d4);
- ctrl_outw(0x0600, 0xa4050192);
+ __raw_writew(0x0600, 0xa40501d4);
+ __raw_writew(0x0600, 0xa4050192);
if (gpio_get_value(GPIO_PTB3)) {
printk(KERN_INFO "USB1 function is selected\n");
@@ -925,7 +952,7 @@
gpio_request(GPIO_FN_LCDVSYN, NULL);
gpio_request(GPIO_FN_LCDDON, NULL);
gpio_request(GPIO_FN_LCDLCLK, NULL);
- ctrl_outw((ctrl_inw(PORT_HIZA) & ~0x0001), PORT_HIZA);
+ __raw_writew((__raw_readw(PORT_HIZA) & ~0x0001), PORT_HIZA);
gpio_request(GPIO_PTE6, NULL);
gpio_request(GPIO_PTU1, NULL);
@@ -937,7 +964,7 @@
gpio_direction_output(GPIO_PTA2, 0);
/* I/O buffer drive ability is high */
- ctrl_outw((ctrl_inw(IODRIVEA) & ~0x00c0) | 0x0080 , IODRIVEA);
+ __raw_writew((__raw_readw(IODRIVEA) & ~0x00c0) | 0x0080 , IODRIVEA);
if (gpio_get_value(GPIO_PTE6)) {
/* DVI */
@@ -1069,7 +1096,7 @@
gpio_direction_output(GPIO_PTB7, 0);
/* I/O buffer drive ability is high for SDHI1 */
- ctrl_outw((ctrl_inw(IODRIVEA) & ~0x3000) | 0x2000 , IODRIVEA);
+ __raw_writew((__raw_readw(IODRIVEA) & ~0x3000) | 0x2000 , IODRIVEA);
#else
/* enable MSIOF0 on CN11 (needs DS2.4 set to OFF) */
gpio_request(GPIO_FN_MSIOF0_TXD, NULL);
@@ -1107,6 +1134,11 @@
gpio_request(GPIO_FN_FSIOBLRCK, NULL);
gpio_request(GPIO_FN_CLKAUDIOBO, NULL);
+ /* set SPU2 clock to 83.4 MHz */
+ clk = clk_get(NULL, "spu_clk");
+ clk_set_rate(clk, clk_round_rate(clk, 83333333));
+ clk_put(clk);
+
/* change parent of FSI B */
clk = clk_get(NULL, "fsib_clk");
clk_register(&fsimckb_clk);
@@ -1123,6 +1155,17 @@
gpio_request(GPIO_FN_INTC_IRQ1, NULL);
gpio_direction_input(GPIO_FN_INTC_IRQ1);
+ /* set VPU clock to 166 MHz */
+ clk = clk_get(NULL, "vpu_clk");
+ clk_set_rate(clk, clk_round_rate(clk, 166000000));
+ clk_put(clk);
+
+ /* enable IrDA */
+ gpio_request(GPIO_FN_IRDA_OUT, NULL);
+ gpio_request(GPIO_FN_IRDA_IN, NULL);
+ gpio_request(GPIO_PTU5, NULL);
+ gpio_direction_output(GPIO_PTU5, 0);
+
/* enable I2C device */
i2c_register_board_info(0, i2c0_devices,
ARRAY_SIZE(i2c0_devices));
diff --git a/arch/sh/boards/mach-highlander/irq-r7780mp.c b/arch/sh/boards/mach-highlander/irq-r7780mp.c
index 83c28bc..9893fd3 100644
--- a/arch/sh/boards/mach-highlander/irq-r7780mp.c
+++ b/arch/sh/boards/mach-highlander/irq-r7780mp.c
@@ -64,7 +64,7 @@
unsigned char * __init highlander_plat_irq_setup(void)
{
- if ((ctrl_inw(0xa4000700) & 0xf000) == 0x2000) {
+ if ((__raw_readw(0xa4000700) & 0xf000) == 0x2000) {
printk(KERN_INFO "Using r7780mp interrupt controller.\n");
register_intc_controller(&intc_desc);
return irl2irq;
diff --git a/arch/sh/boards/mach-highlander/irq-r7780rp.c b/arch/sh/boards/mach-highlander/irq-r7780rp.c
index b721e86..0805b21 100644
--- a/arch/sh/boards/mach-highlander/irq-r7780rp.c
+++ b/arch/sh/boards/mach-highlander/irq-r7780rp.c
@@ -57,7 +57,7 @@
unsigned char * __init highlander_plat_irq_setup(void)
{
- if (ctrl_inw(0xa5000600)) {
+ if (__raw_readw(0xa5000600)) {
printk(KERN_INFO "Using r7780rp interrupt controller.\n");
register_intc_controller(&intc_desc);
return irl2irq;
diff --git a/arch/sh/boards/mach-highlander/irq-r7785rp.c b/arch/sh/boards/mach-highlander/irq-r7785rp.c
index 3811b06..558b248 100644
--- a/arch/sh/boards/mach-highlander/irq-r7785rp.c
+++ b/arch/sh/boards/mach-highlander/irq-r7785rp.c
@@ -66,20 +66,20 @@
unsigned char * __init highlander_plat_irq_setup(void)
{
- if ((ctrl_inw(0xa4000158) & 0xf000) != 0x1000)
+ if ((__raw_readw(0xa4000158) & 0xf000) != 0x1000)
return NULL;
printk(KERN_INFO "Using r7785rp interrupt controller.\n");
- ctrl_outw(0x0000, PA_IRLSSR1); /* FPGA IRLSSR1(CF_CD clear) */
+ __raw_writew(0x0000, PA_IRLSSR1); /* FPGA IRLSSR1(CF_CD clear) */
/* Setup the FPGA IRL */
- ctrl_outw(0x0000, PA_IRLPRA); /* FPGA IRLA */
- ctrl_outw(0xe598, PA_IRLPRB); /* FPGA IRLB */
- ctrl_outw(0x7060, PA_IRLPRC); /* FPGA IRLC */
- ctrl_outw(0x0000, PA_IRLPRD); /* FPGA IRLD */
- ctrl_outw(0x4321, PA_IRLPRE); /* FPGA IRLE */
- ctrl_outw(0xdcba, PA_IRLPRF); /* FPGA IRLF */
+ __raw_writew(0x0000, PA_IRLPRA); /* FPGA IRLA */
+ __raw_writew(0xe598, PA_IRLPRB); /* FPGA IRLB */
+ __raw_writew(0x7060, PA_IRLPRC); /* FPGA IRLC */
+ __raw_writew(0x0000, PA_IRLPRD); /* FPGA IRLD */
+ __raw_writew(0x4321, PA_IRLPRE); /* FPGA IRLE */
+ __raw_writew(0xdcba, PA_IRLPRF); /* FPGA IRLF */
register_intc_controller(&intc_desc);
return irl2irq;
diff --git a/arch/sh/boards/mach-highlander/psw.c b/arch/sh/boards/mach-highlander/psw.c
index 37b1a2e..5227863 100644
--- a/arch/sh/boards/mach-highlander/psw.c
+++ b/arch/sh/boards/mach-highlander/psw.c
@@ -24,7 +24,7 @@
unsigned int l, mask;
int ret = 0;
- l = ctrl_inw(PA_DBSW);
+ l = __raw_readw(PA_DBSW);
/* Nothing to do if there's no state change */
if (psw->state) {
@@ -45,7 +45,7 @@
out:
/* Clear the switch IRQs */
l |= (0x7 << 12);
- ctrl_outw(l, PA_DBSW);
+ __raw_writew(l, PA_DBSW);
return IRQ_RETVAL(ret);
}
diff --git a/arch/sh/boards/mach-highlander/setup.c b/arch/sh/boards/mach-highlander/setup.c
index f663c14..affd667 100644
--- a/arch/sh/boards/mach-highlander/setup.c
+++ b/arch/sh/boards/mach-highlander/setup.c
@@ -311,13 +311,13 @@
*/
static int ivdr_clk_enable(struct clk *clk)
{
- ctrl_outw(ctrl_inw(PA_IVDRCTL) | (1 << IVDR_CK_ON), PA_IVDRCTL);
+ __raw_writew(__raw_readw(PA_IVDRCTL) | (1 << IVDR_CK_ON), PA_IVDRCTL);
return 0;
}
static void ivdr_clk_disable(struct clk *clk)
{
- ctrl_outw(ctrl_inw(PA_IVDRCTL) & ~(1 << IVDR_CK_ON), PA_IVDRCTL);
+ __raw_writew(__raw_readw(PA_IVDRCTL) & ~(1 << IVDR_CK_ON), PA_IVDRCTL);
}
static struct clk_ops ivdr_clk_ops = {
@@ -337,7 +337,7 @@
static void r7780rp_power_off(void)
{
if (mach_is_r7780mp() || mach_is_r7785rp())
- ctrl_outw(0x0001, PA_POFF);
+ __raw_writew(0x0001, PA_POFF);
}
/*
@@ -345,7 +345,7 @@
*/
static void __init highlander_setup(char **cmdline_p)
{
- u16 ver = ctrl_inw(PA_VERREG);
+ u16 ver = __raw_readw(PA_VERREG);
int i;
printk(KERN_INFO "Renesas Solutions Highlander %s support.\n",
@@ -370,12 +370,12 @@
clk_enable(clk);
}
- ctrl_outw(0x0000, PA_OBLED); /* Clear LED. */
+ __raw_writew(0x0000, PA_OBLED); /* Clear LED. */
if (mach_is_r7780rp())
- ctrl_outw(0x0001, PA_SDPOW); /* SD Power ON */
+ __raw_writew(0x0001, PA_SDPOW); /* SD Power ON */
- ctrl_outw(ctrl_inw(PA_IVDRCTL) | 0x01, PA_IVDRCTL); /* Si13112 */
+ __raw_writew(__raw_readw(PA_IVDRCTL) | 0x01, PA_IVDRCTL); /* Si13112 */
pm_power_off = r7780rp_power_off;
}
diff --git a/arch/sh/boards/mach-hp6xx/hp6xx_apm.c b/arch/sh/boards/mach-hp6xx/hp6xx_apm.c
index e85212f..b49535c 100644
--- a/arch/sh/boards/mach-hp6xx/hp6xx_apm.c
+++ b/arch/sh/boards/mach-hp6xx/hp6xx_apm.c
@@ -53,7 +53,7 @@
info->ac_line_status = (battery > HP680_BATTERY_AC_ON) ?
APM_AC_ONLINE : APM_AC_OFFLINE;
- pgdr = ctrl_inb(PGDR);
+ pgdr = __raw_readb(PGDR);
if (pgdr & PGDR_MAIN_BATTERY_OUT) {
info->battery_status = APM_BATTERY_STATUS_NOT_PRESENT;
info->battery_flag = 0x80;
diff --git a/arch/sh/boards/mach-hp6xx/pm.c b/arch/sh/boards/mach-hp6xx/pm.c
index d936c1a..4499a37 100644
--- a/arch/sh/boards/mach-hp6xx/pm.c
+++ b/arch/sh/boards/mach-hp6xx/pm.c
@@ -53,17 +53,17 @@
sh_wdt_write_cnt(0);
/* disable PLL1 */
- frqcr = ctrl_inw(FRQCR);
+ frqcr = __raw_readw(FRQCR);
frqcr &= ~(FRQCR_PLLEN | FRQCR_PSTBY);
- ctrl_outw(frqcr, FRQCR);
+ __raw_writew(frqcr, FRQCR);
/* enable standby */
- stbcr = ctrl_inb(STBCR);
- ctrl_outb(stbcr | STBCR_STBY | STBCR_MSTP2, STBCR);
+ stbcr = __raw_readb(STBCR);
+ __raw_writeb(stbcr | STBCR_STBY | STBCR_MSTP2, STBCR);
/* set self-refresh */
- mcr = ctrl_inw(MCR);
- ctrl_outw(mcr & ~MCR_RFSH, MCR);
+ mcr = __raw_readw(MCR);
+ __raw_writew(mcr & ~MCR_RFSH, MCR);
/* set interrupt handler */
asm volatile("stc vbr, %0" : "=r" (vbr_old));
@@ -73,8 +73,8 @@
&wakeup_start, &wakeup_end - &wakeup_start);
asm volatile("ldc %0, vbr" : : "r" (vbr_new));
- ctrl_outw(0, RTCNT);
- ctrl_outw(mcr | MCR_RFSH | MCR_RMODE, MCR);
+ __raw_writew(0, RTCNT);
+ __raw_writew(mcr | MCR_RFSH | MCR_RMODE, MCR);
cpu_sleep();
@@ -83,14 +83,14 @@
free_page(vbr_new);
/* enable PLL1 */
- frqcr = ctrl_inw(FRQCR);
+ frqcr = __raw_readw(FRQCR);
frqcr |= FRQCR_PSTBY;
- ctrl_outw(frqcr, FRQCR);
+ __raw_writew(frqcr, FRQCR);
udelay(50);
frqcr |= FRQCR_PLLEN;
- ctrl_outw(frqcr, FRQCR);
+ __raw_writew(frqcr, FRQCR);
- ctrl_outb(stbcr, STBCR);
+ __raw_writeb(stbcr, STBCR);
clear_bl_bit();
}
@@ -115,21 +115,21 @@
outw(hd64461_stbcr, HD64461_STBCR);
#endif
- ctrl_outb(0x1f, DACR);
+ __raw_writeb(0x1f, DACR);
- stbcr = ctrl_inb(STBCR);
- ctrl_outb(0x01, STBCR);
+ stbcr = __raw_readb(STBCR);
+ __raw_writeb(0x01, STBCR);
- stbcr2 = ctrl_inb(STBCR2);
- ctrl_outb(0x7f , STBCR2);
+ stbcr2 = __raw_readb(STBCR2);
+ __raw_writeb(0x7f , STBCR2);
outw(0xf07f, HD64461_SCPUCR);
pm_enter();
outw(0, HD64461_SCPUCR);
- ctrl_outb(stbcr, STBCR);
- ctrl_outb(stbcr2, STBCR2);
+ __raw_writeb(stbcr, STBCR);
+ __raw_writeb(stbcr2, STBCR2);
#ifdef CONFIG_HD64461_ENABLER
hd64461_stbcr = inw(HD64461_STBCR);
diff --git a/arch/sh/boards/mach-hp6xx/setup.c b/arch/sh/boards/mach-hp6xx/setup.c
index e6dd5e9..8c9add5 100644
--- a/arch/sh/boards/mach-hp6xx/setup.c
+++ b/arch/sh/boards/mach-hp6xx/setup.c
@@ -149,19 +149,19 @@
sh_dac_output(0, DAC_SPEAKER_VOLUME);
sh_dac_disable(DAC_SPEAKER_VOLUME);
- v8 = ctrl_inb(DACR);
+ v8 = __raw_readb(DACR);
v8 &= ~DACR_DAE;
- ctrl_outb(v8,DACR);
+ __raw_writeb(v8,DACR);
- v8 = ctrl_inb(SCPDR);
+ v8 = __raw_readb(SCPDR);
v8 |= SCPDR_TS_SCAN_X | SCPDR_TS_SCAN_Y;
v8 &= ~SCPDR_TS_SCAN_ENABLE;
- ctrl_outb(v8, SCPDR);
+ __raw_writeb(v8, SCPDR);
- v = ctrl_inw(SCPCR);
+ v = __raw_readw(SCPCR);
v &= ~SCPCR_TS_MASK;
v |= SCPCR_TS_ENABLE;
- ctrl_outw(v, SCPCR);
+ __raw_writew(v, SCPCR);
}
device_initcall(hp6xx_devices_setup);
diff --git a/arch/sh/boards/mach-kfr2r09/setup.c b/arch/sh/boards/mach-kfr2r09/setup.c
index 5d7b5d9..b2cd0ed 100644
--- a/arch/sh/boards/mach-kfr2r09/setup.c
+++ b/arch/sh/boards/mach-kfr2r09/setup.c
@@ -282,7 +282,7 @@
* use 1.8 V for VccQ_VIO
* use 2.85V for VccQ_SR
*/
- ctrl_outw((ctrl_inw(DRVCRB) & ~0x0003) | 0x0001, DRVCRB);
+ __raw_writew((__raw_readw(DRVCRB) & ~0x0003) | 0x0001, DRVCRB);
/* reset clear */
ret = gpio_request(GPIO_PTB4, NULL);
@@ -351,7 +351,7 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = 101,
+ .start = 100,
.flags = IORESOURCE_IRQ,
},
};
@@ -492,13 +492,13 @@
if (kfr2r09_usb0_gadget_i2c_setup() != 0)
return -ENODEV; /* unable to configure using i2c */
- ctrl_outw((ctrl_inw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB);
+ __raw_writew((__raw_readw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB);
gpio_request(GPIO_FN_PDSTATUS, NULL); /* R-standby disables USB clock */
gpio_request(GPIO_PTV6, NULL); /* USBCLK_ON */
gpio_direction_output(GPIO_PTV6, 1); /* USBCLK_ON = H */
msleep(20); /* wait 20ms to let the clock settle */
clk_enable(clk_get(NULL, "usb0"));
- ctrl_outw(0x0600, 0xa40501d4);
+ __raw_writew(0x0600, 0xa40501d4);
return 0;
}
@@ -526,12 +526,12 @@
gpio_direction_output(GPIO_PTG3, 1); /* HPON_ON = H */
/* setup NOR flash at CS0 */
- ctrl_outl(0x36db0400, BSC_CS0BCR);
- ctrl_outl(0x00000500, BSC_CS0WCR);
+ __raw_writel(0x36db0400, BSC_CS0BCR);
+ __raw_writel(0x00000500, BSC_CS0WCR);
/* setup NAND flash at CS4 */
- ctrl_outl(0x36db0400, BSC_CS4BCR);
- ctrl_outl(0x00000500, BSC_CS4WCR);
+ __raw_writel(0x36db0400, BSC_CS4BCR);
+ __raw_writel(0x00000500, BSC_CS4WCR);
/* setup KEYSC pins */
gpio_request(GPIO_FN_KEYOUT0, NULL);
diff --git a/arch/sh/boards/mach-landisk/gio.c b/arch/sh/boards/mach-landisk/gio.c
index 5280131..01e6abb 100644
--- a/arch/sh/boards/mach-landisk/gio.c
+++ b/arch/sh/boards/mach-landisk/gio.c
@@ -76,39 +76,39 @@
break;
case GIODRV_IOCSGIODATA1: /* write byte */
- ctrl_outb((unsigned char)(0x0ff & data), addr);
+ __raw_writeb((unsigned char)(0x0ff & data), addr);
break;
case GIODRV_IOCSGIODATA2: /* write word */
if (addr & 0x01) {
return -EFAULT;
}
- ctrl_outw((unsigned short int)(0x0ffff & data), addr);
+ __raw_writew((unsigned short int)(0x0ffff & data), addr);
break;
case GIODRV_IOCSGIODATA4: /* write long */
if (addr & 0x03) {
return -EFAULT;
}
- ctrl_outl(data, addr);
+ __raw_writel(data, addr);
break;
case GIODRV_IOCGGIODATA1: /* read byte */
- data = ctrl_inb(addr);
+ data = __raw_readb(addr);
break;
case GIODRV_IOCGGIODATA2: /* read word */
if (addr & 0x01) {
return -EFAULT;
}
- data = ctrl_inw(addr);
+ data = __raw_readw(addr);
break;
case GIODRV_IOCGGIODATA4: /* read long */
if (addr & 0x03) {
return -EFAULT;
}
- data = ctrl_inl(addr);
+ data = __raw_readl(addr);
break;
default:
return -EFAULT;
diff --git a/arch/sh/boards/mach-landisk/irq.c b/arch/sh/boards/mach-landisk/irq.c
index 7b284cd..96f38a4 100644
--- a/arch/sh/boards/mach-landisk/irq.c
+++ b/arch/sh/boards/mach-landisk/irq.c
@@ -22,14 +22,14 @@
{
unsigned char mask = 0xff ^ (0x01 << (irq - 5));
- ctrl_outb(ctrl_inb(PA_IMASK) & mask, PA_IMASK);
+ __raw_writeb(__raw_readb(PA_IMASK) & mask, PA_IMASK);
}
static void enable_landisk_irq(unsigned int irq)
{
unsigned char value = (0x01 << (irq - 5));
- ctrl_outb(ctrl_inb(PA_IMASK) | value, PA_IMASK);
+ __raw_writeb(__raw_readb(PA_IMASK) | value, PA_IMASK);
}
static struct irq_chip landisk_irq_chip __read_mostly = {
@@ -52,5 +52,5 @@
handle_level_irq, "level");
enable_landisk_irq(i);
}
- ctrl_outb(0x00, PA_PWRINT_CLR);
+ __raw_writeb(0x00, PA_PWRINT_CLR);
}
diff --git a/arch/sh/boards/mach-landisk/psw.c b/arch/sh/boards/mach-landisk/psw.c
index e6b0efa..bef8352 100644
--- a/arch/sh/boards/mach-landisk/psw.c
+++ b/arch/sh/boards/mach-landisk/psw.c
@@ -25,7 +25,7 @@
unsigned int sw_value;
int ret = 0;
- sw_value = (0x0ff & (~ctrl_inb(PA_STATUS)));
+ sw_value = (0x0ff & (~__raw_readb(PA_STATUS)));
/* Nothing to do if there's no state change */
if (psw->state) {
@@ -42,7 +42,7 @@
out:
/* Clear the switch IRQs */
- ctrl_outb(0x00, PA_PWRINT_CLR);
+ __raw_writeb(0x00, PA_PWRINT_CLR);
return IRQ_RETVAL(ret);
}
diff --git a/arch/sh/boards/mach-landisk/setup.c b/arch/sh/boards/mach-landisk/setup.c
index db22ea2..50337acc 100644
--- a/arch/sh/boards/mach-landisk/setup.c
+++ b/arch/sh/boards/mach-landisk/setup.c
@@ -25,7 +25,7 @@
static void landisk_power_off(void)
{
- ctrl_outb(0x01, PA_SHUTDOWN);
+ __raw_writeb(0x01, PA_SHUTDOWN);
}
static struct resource cf_ide_resources[3];
@@ -63,7 +63,7 @@
/* open I/O area window */
paddrbase = virt_to_phys((void *)PA_AREA5_IO);
prot = PAGE_KERNEL_PCC(1, _PAGE_PCC_IO16);
- cf_ide_base = p3_ioremap(paddrbase, PAGE_SIZE, prot.pgprot);
+ cf_ide_base = ioremap_prot(paddrbase, PAGE_SIZE, pgprot_val(prot));
if (!cf_ide_base) {
printk("allocate_cf_area : can't open CF I/O window!\n");
return -ENOMEM;
@@ -88,7 +88,7 @@
static void __init landisk_setup(char **cmdline_p)
{
/* LED ON */
- ctrl_outb(ctrl_inb(PA_LED) | 0x03, PA_LED);
+ __raw_writeb(__raw_readb(PA_LED) | 0x03, PA_LED);
printk(KERN_INFO "I-O DATA DEVICE, INC. \"LANDISK Series\" support.\n");
pm_power_off = landisk_power_off;
diff --git a/arch/sh/boards/mach-lboxre2/setup.c b/arch/sh/boards/mach-lboxre2/setup.c
index 2b0b581..79b4e0d7 100644
--- a/arch/sh/boards/mach-lboxre2/setup.c
+++ b/arch/sh/boards/mach-lboxre2/setup.c
@@ -56,8 +56,8 @@
/* open I/O area window */
paddrbase = virt_to_phys((void*)PA_AREA5_IO);
psize = PAGE_SIZE;
- prot = PAGE_KERNEL_PCC( 1 , _PAGE_PCC_IO16);
- cf0_io_base = (u32)p3_ioremap(paddrbase, psize, prot.pgprot);
+ prot = PAGE_KERNEL_PCC(1, _PAGE_PCC_IO16);
+ cf0_io_base = (u32)ioremap_prot(paddrbase, psize, pgprot_val(prot));
if (!cf0_io_base) {
printk(KERN_ERR "%s : can't open CF I/O window!\n" , __func__ );
return -ENOMEM;
diff --git a/arch/sh/boards/mach-microdev/io.c b/arch/sh/boards/mach-microdev/io.c
index 52dd748..2960c65 100644
--- a/arch/sh/boards/mach-microdev/io.c
+++ b/arch/sh/boards/mach-microdev/io.c
@@ -141,10 +141,10 @@
#if defined(CONFIG_PCI)
/* System board present, just make a dummy SRAM access. (CS0 will be
mapped to PCI memory, probably good to avoid it.) */
- ctrl_inw(0xa6800000);
+ __raw_readw(0xa6800000);
#else
/* CS0 will be mapped to flash, ROM etc so safe to access it. */
- ctrl_inw(0xa0000000);
+ __raw_readw(0xa0000000);
#endif
}
diff --git a/arch/sh/boards/mach-microdev/irq.c b/arch/sh/boards/mach-microdev/irq.c
index b551963..a26d166 100644
--- a/arch/sh/boards/mach-microdev/irq.c
+++ b/arch/sh/boards/mach-microdev/irq.c
@@ -88,7 +88,7 @@
fpgaIrq = fpgaIrqTable[irq].fpgaIrq;
/* disable interrupts on the FPGA INTC register */
- ctrl_outl(MICRODEV_FPGA_INTC_MASK(fpgaIrq), MICRODEV_FPGA_INTDSB_REG);
+ __raw_writel(MICRODEV_FPGA_INTC_MASK(fpgaIrq), MICRODEV_FPGA_INTDSB_REG);
}
static void enable_microdev_irq(unsigned int irq)
@@ -107,13 +107,13 @@
priorityReg = MICRODEV_FPGA_INTPRI_REG(fpgaIrq);
/* set priority for the interrupt */
- priorities = ctrl_inl(priorityReg);
+ priorities = __raw_readl(priorityReg);
priorities &= ~MICRODEV_FPGA_INTPRI_MASK(fpgaIrq);
priorities |= MICRODEV_FPGA_INTPRI_LEVEL(fpgaIrq, pri);
- ctrl_outl(priorities, priorityReg);
+ __raw_writel(priorities, priorityReg);
/* enable interrupts on the FPGA INTC register */
- ctrl_outl(MICRODEV_FPGA_INTC_MASK(fpgaIrq), MICRODEV_FPGA_INTENB_REG);
+ __raw_writel(MICRODEV_FPGA_INTC_MASK(fpgaIrq), MICRODEV_FPGA_INTENB_REG);
}
/* This function sets the desired irq handler to be a MicroDev type */
@@ -134,7 +134,7 @@
int i;
/* disable interrupts on the FPGA INTC register */
- ctrl_outl(~0ul, MICRODEV_FPGA_INTDSB_REG);
+ __raw_writel(~0ul, MICRODEV_FPGA_INTDSB_REG);
for (i = 0; i < NUM_EXTERNAL_IRQS; i++)
make_microdev_irq(i);
diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c
index 507c77b..be300aa 100644
--- a/arch/sh/boards/mach-migor/setup.c
+++ b/arch/sh/boards/mach-migor/setup.c
@@ -397,7 +397,7 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = 101,
+ .start = 100,
.flags = IORESOURCE_IRQ,
},
};
@@ -431,7 +431,7 @@
};
static struct ov772x_camera_info ov7725_info = {
- .buswidth = SOCAM_DATAWIDTH_8,
+ .flags = OV772X_FLAG_8BIT,
};
static struct soc_camera_link ov7725_link = {
@@ -496,28 +496,16 @@
&migor_sdram_enter_end,
&migor_sdram_leave_start,
&migor_sdram_leave_end);
-#ifdef CONFIG_PM
/* Let D11 LED show STATUS0 */
gpio_request(GPIO_FN_STATUS0, NULL);
/* Lit D12 LED show PDSTATUS */
gpio_request(GPIO_FN_PDSTATUS, NULL);
-#else
- /* Lit D11 LED */
- gpio_request(GPIO_PTJ7, NULL);
- gpio_direction_output(GPIO_PTJ7, 1);
- gpio_export(GPIO_PTJ7, 0);
-
- /* Lit D12 LED */
- gpio_request(GPIO_PTJ5, NULL);
- gpio_direction_output(GPIO_PTJ5, 1);
- gpio_export(GPIO_PTJ5, 0);
-#endif
/* SMC91C111 - Enable IRQ0, Setup CS4 for 16-bit fast access */
gpio_request(GPIO_FN_IRQ0, NULL);
- ctrl_outl(0x00003400, BSC_CS4BCR);
- ctrl_outl(0x00110080, BSC_CS4WCR);
+ __raw_writel(0x00003400, BSC_CS4BCR);
+ __raw_writel(0x00110080, BSC_CS4WCR);
/* KEYSC */
gpio_request(GPIO_FN_KEYOUT0, NULL);
@@ -533,7 +521,7 @@
/* NAND Flash */
gpio_request(GPIO_FN_CS6A_CE2B, NULL);
- ctrl_outl((ctrl_inl(BSC_CS6ABCR) & ~0x0600) | 0x0200, BSC_CS6ABCR);
+ __raw_writel((__raw_readl(BSC_CS6ABCR) & ~0x0600) | 0x0200, BSC_CS6ABCR);
gpio_request(GPIO_PTA1, NULL);
gpio_direction_input(GPIO_PTA1);
@@ -627,7 +615,7 @@
#else
gpio_direction_output(GPIO_PTT0, 1);
#endif
- ctrl_outw(ctrl_inw(PORT_MSELCRB) | 0x2000, PORT_MSELCRB); /* D15->D8 */
+ __raw_writew(__raw_readw(PORT_MSELCRB) | 0x2000, PORT_MSELCRB); /* D15->D8 */
platform_resource_setup_memory(&migor_ceu_device, "ceu", 4 << 20);
diff --git a/arch/sh/boards/mach-r2d/irq.c b/arch/sh/boards/mach-r2d/irq.c
index 78d7b27..574f009 100644
--- a/arch/sh/boards/mach-r2d/irq.c
+++ b/arch/sh/boards/mach-r2d/irq.c
@@ -129,7 +129,7 @@
{
struct intc_desc *d;
- switch (ctrl_inw(PA_VERREG) & 0xf0) {
+ switch (__raw_readw(PA_VERREG) & 0xf0) {
#ifdef CONFIG_RTS7751R2D_PLUS
case 0x10:
printk(KERN_INFO "Using R2D-PLUS interrupt controller.\n");
@@ -147,7 +147,7 @@
#endif
default:
printk(KERN_INFO "Unknown R2D interrupt controller 0x%04x\n",
- ctrl_inw(PA_VERREG));
+ __raw_readw(PA_VERREG));
return;
}
diff --git a/arch/sh/boards/mach-r2d/setup.c b/arch/sh/boards/mach-r2d/setup.c
index a625ecb..b84df6a 100644
--- a/arch/sh/boards/mach-r2d/setup.c
+++ b/arch/sh/boards/mach-r2d/setup.c
@@ -70,7 +70,7 @@
static void r2d_chip_select(struct sh_spi_info *spi, int cs, int state)
{
BUG_ON(cs != 0); /* Single Epson RTC-9701JE attached on CS0 */
- ctrl_outw(state == BITBANG_CS_ACTIVE, PA_RTCCE);
+ __raw_writew(state == BITBANG_CS_ACTIVE, PA_RTCCE);
}
static struct sh_spi_info spi_info = {
@@ -262,7 +262,7 @@
static void rts7751r2d_power_off(void)
{
- ctrl_outw(0x0001, PA_POWOFF);
+ __raw_writew(0x0001, PA_POWOFF);
}
/*
@@ -271,14 +271,14 @@
static void __init rts7751r2d_setup(char **cmdline_p)
{
void __iomem *sm501_reg;
- u16 ver = ctrl_inw(PA_VERREG);
+ u16 ver = __raw_readw(PA_VERREG);
printk(KERN_INFO "Renesas Technology Sales RTS7751R2D support.\n");
printk(KERN_INFO "FPGA version:%d (revision:%d)\n",
(ver >> 4) & 0xf, ver & 0xf);
- ctrl_outw(0x0000, PA_OUTPORT);
+ __raw_writew(0x0000, PA_OUTPORT);
pm_power_off = rts7751r2d_power_off;
/* sm501 dram configuration:
diff --git a/arch/sh/boards/mach-rsk/devices-rsk7203.c b/arch/sh/boards/mach-rsk/devices-rsk7203.c
index c37617e..4fa08ba 100644
--- a/arch/sh/boards/mach-rsk/devices-rsk7203.c
+++ b/arch/sh/boards/mach-rsk/devices-rsk7203.c
@@ -96,7 +96,7 @@
gpio_request(GPIO_FN_RXD0, NULL);
/* Setup LAN9118: CS1 in 16-bit Big Endian Mode, IRQ0 at Port B */
- ctrl_outl(0x36db0400, 0xfffc0008); /* CS1BCR */
+ __raw_writel(0x36db0400, 0xfffc0008); /* CS1BCR */
gpio_request(GPIO_FN_IRQ0_PB, NULL);
return platform_add_devices(rsk7203_devices,
diff --git a/arch/sh/boards/mach-sdk7780/irq.c b/arch/sh/boards/mach-sdk7780/irq.c
index 8555581..e5f7564 100644
--- a/arch/sh/boards/mach-sdk7780/irq.c
+++ b/arch/sh/boards/mach-sdk7780/irq.c
@@ -37,9 +37,9 @@
{
printk(KERN_INFO "Using SDK7780 interrupt controller.\n");
- ctrl_outw(0xFFFF, FPGA_IRQ0MR);
+ __raw_writew(0xFFFF, FPGA_IRQ0MR);
/* Setup IRL 0-3 */
- ctrl_outw(0x0003, FPGA_IMSR);
+ __raw_writew(0x0003, FPGA_IMSR);
plat_irq_setup_pins(IRQ_MODE_IRL3210);
register_intc_controller(&fpga_intc_desc);
diff --git a/arch/sh/boards/mach-sdk7780/setup.c b/arch/sh/boards/mach-sdk7780/setup.c
index aad94a7..4da38db 100644
--- a/arch/sh/boards/mach-sdk7780/setup.c
+++ b/arch/sh/boards/mach-sdk7780/setup.c
@@ -20,27 +20,18 @@
#define GPIO_PECR 0xFFEA0008
-//* Heartbeat */
-static struct heartbeat_data heartbeat_data = {
- .regsize = 16,
-};
-
-static struct resource heartbeat_resources[] = {
- [0] = {
- .start = PA_LED,
- .end = PA_LED,
- .flags = IORESOURCE_MEM,
- },
+/* Heartbeat */
+static struct resource heartbeat_resource = {
+ .start = PA_LED,
+ .end = PA_LED,
+ .flags = IORESOURCE_MEM | IORESOURCE_MEM_16BIT,
};
static struct platform_device heartbeat_device = {
.name = "heartbeat",
.id = -1,
- .dev = {
- .platform_data = &heartbeat_data,
- },
- .num_resources = ARRAY_SIZE(heartbeat_resources),
- .resource = heartbeat_resources,
+ .num_resources = 1,
+ .resource = &heartbeat_resource,
};
/* SMC91x */
@@ -83,8 +74,8 @@
static void __init sdk7780_setup(char **cmdline_p)
{
- u16 ver = ctrl_inw(FPGA_FPVERR);
- u16 dateStamp = ctrl_inw(FPGA_FPDATER);
+ u16 ver = __raw_readw(FPGA_FPVERR);
+ u16 dateStamp = __raw_readw(FPGA_FPDATER);
printk(KERN_INFO "Renesas Technology Europe SDK7780 support.\n");
printk(KERN_INFO "Board version: %d (revision %d), "
@@ -94,7 +85,7 @@
dateStamp);
/* Setup pin mux'ing for PCIC */
- ctrl_outw(0x0000, GPIO_PECR);
+ __raw_writew(0x0000, GPIO_PECR);
}
/*
diff --git a/arch/sh/boards/mach-sdk7786/Makefile b/arch/sh/boards/mach-sdk7786/Makefile
new file mode 100644
index 0000000..a29f19e
--- /dev/null
+++ b/arch/sh/boards/mach-sdk7786/Makefile
@@ -0,0 +1 @@
+obj-y := setup.o fpga.o irq.o
diff --git a/arch/sh/boards/mach-sdk7786/fpga.c b/arch/sh/boards/mach-sdk7786/fpga.c
new file mode 100644
index 0000000..3e4ec66
--- /dev/null
+++ b/arch/sh/boards/mach-sdk7786/fpga.c
@@ -0,0 +1,72 @@
+/*
+ * SDK7786 FPGA Support.
+ *
+ * Copyright (C) 2010 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/bcd.h>
+#include <mach/fpga.h>
+#include <asm/sizes.h>
+
+#define FPGA_REGS_OFFSET 0x03fff800
+#define FPGA_REGS_SIZE 0x490
+
+/*
+ * The FPGA can be mapped in any of the generally available areas,
+ * so we attempt to scan for it using the fixed SRSTR read magic.
+ *
+ * Once the FPGA is located, the rest of the mapping data for the other
+ * components can be determined dynamically from its section mapping
+ * registers.
+ */
+static void __iomem *sdk7786_fpga_probe(void)
+{
+ unsigned long area;
+ void __iomem *base;
+
+ /*
+ * Iterate over all of the areas where the FPGA could be mapped.
+ * The possible range is anywhere from area 0 through 6, area 7
+ * is reserved.
+ */
+ for (area = PA_AREA0; area < PA_AREA7; area += SZ_64M) {
+ base = ioremap_nocache(area + FPGA_REGS_OFFSET, FPGA_REGS_SIZE);
+ if (!base) {
+ /* Failed to remap this area, move along. */
+ continue;
+ }
+
+ if (ioread16(base + SRSTR) == SRSTR_MAGIC)
+ return base; /* Found it! */
+
+ iounmap(base);
+ }
+
+ return NULL;
+}
+
+void __iomem *sdk7786_fpga_base;
+
+void __init sdk7786_fpga_init(void)
+{
+ u16 version, date;
+
+ sdk7786_fpga_base = sdk7786_fpga_probe();
+ if (unlikely(!sdk7786_fpga_base)) {
+ panic("FPGA detection failed.\n");
+ return;
+ }
+
+ version = fpga_read_reg(FPGAVR);
+ date = fpga_read_reg(FPGADR);
+
+ pr_info("\tFPGA version:\t%d.%d (built on %d/%d/%d)\n",
+ bcd2bin(version >> 8) & 0xf, bcd2bin(version & 0xf),
+ ((date >> 12) & 0xf) + 2000,
+ (date >> 8) & 0xf, bcd2bin(date & 0xff));
+}
diff --git a/arch/sh/boards/mach-sdk7786/irq.c b/arch/sh/boards/mach-sdk7786/irq.c
new file mode 100644
index 0000000..46943a0
--- /dev/null
+++ b/arch/sh/boards/mach-sdk7786/irq.c
@@ -0,0 +1,48 @@
+/*
+ * SDK7786 FPGA IRQ Controller Support.
+ *
+ * Copyright (C) 2010 Matt Fleming
+ * Copyright (C) 2010 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/irq.h>
+#include <mach/fpga.h>
+#include <mach/irq.h>
+
+enum {
+ ATA_IRQ_BIT = 1,
+ SPI_BUSY_BIT = 2,
+ LIRQ5_BIT = 3,
+ LIRQ6_BIT = 4,
+ LIRQ7_BIT = 5,
+ LIRQ8_BIT = 6,
+ KEY_IRQ_BIT = 7,
+ PEN_IRQ_BIT = 8,
+ ETH_IRQ_BIT = 9,
+ RTC_ALARM_BIT = 10,
+ CRYSTAL_FAIL_BIT = 12,
+ ETH_PME_BIT = 14,
+};
+
+void __init sdk7786_init_irq(void)
+{
+ unsigned int tmp;
+
+ /* Enable priority encoding for all IRLs */
+ fpga_write_reg(fpga_read_reg(INTMSR) | 0x0303, INTMSR);
+
+ /* Clear FPGA interrupt status registers */
+ fpga_write_reg(0x0000, INTASR);
+ fpga_write_reg(0x0000, INTBSR);
+
+ /* Unmask FPGA interrupts */
+ tmp = fpga_read_reg(INTAMR);
+ tmp &= ~(1 << ETH_IRQ_BIT);
+ fpga_write_reg(tmp, INTAMR);
+
+ plat_irq_setup_pins(IRQ_MODE_IRL7654_MASK);
+ plat_irq_setup_pins(IRQ_MODE_IRL3210_MASK);
+}
diff --git a/arch/sh/boards/mach-sdk7786/setup.c b/arch/sh/boards/mach-sdk7786/setup.c
new file mode 100644
index 0000000..f094ea2
--- /dev/null
+++ b/arch/sh/boards/mach-sdk7786/setup.c
@@ -0,0 +1,189 @@
+/*
+ * Renesas Technology Europe SDK7786 Support.
+ *
+ * Copyright (C) 2010 Matt Fleming
+ * Copyright (C) 2010 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/smsc911x.h>
+#include <linux/i2c.h>
+#include <linux/irq.h>
+#include <linux/clk.h>
+#include <mach/fpga.h>
+#include <mach/irq.h>
+#include <asm/machvec.h>
+#include <asm/heartbeat.h>
+#include <asm/sizes.h>
+#include <asm/reboot.h>
+
+static struct resource heartbeat_resource = {
+ .start = 0x07fff8b0,
+ .end = 0x07fff8b0 + sizeof(u16) - 1,
+ .flags = IORESOURCE_MEM | IORESOURCE_MEM_16BIT,
+};
+
+static struct platform_device heartbeat_device = {
+ .name = "heartbeat",
+ .id = -1,
+ .num_resources = 1,
+ .resource = &heartbeat_resource,
+};
+
+static struct resource smsc911x_resources[] = {
+ [0] = {
+ .name = "smsc911x-memory",
+ .start = 0x07ffff00,
+ .end = 0x07ffff00 + SZ_256 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .name = "smsc911x-irq",
+ .start = evt2irq(0x2c0),
+ .end = evt2irq(0x2c0),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct smsc911x_platform_config smsc911x_config = {
+ .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+ .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+ .flags = SMSC911X_USE_32BIT,
+ .phy_interface = PHY_INTERFACE_MODE_MII,
+};
+
+static struct platform_device smsc911x_device = {
+ .name = "smsc911x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(smsc911x_resources),
+ .resource = smsc911x_resources,
+ .dev = {
+ .platform_data = &smsc911x_config,
+ },
+};
+
+static struct resource smbus_fpga_resource = {
+ .start = 0x07fff9e0,
+ .end = 0x07fff9e0 + SZ_32 - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device smbus_fpga_device = {
+ .name = "i2c-sdk7786",
+ .id = 0,
+ .num_resources = 1,
+ .resource = &smbus_fpga_resource,
+};
+
+static struct resource smbus_pcie_resource = {
+ .start = 0x07fffc30,
+ .end = 0x07fffc30 + SZ_32 - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device smbus_pcie_device = {
+ .name = "i2c-sdk7786",
+ .id = 1,
+ .num_resources = 1,
+ .resource = &smbus_pcie_resource,
+};
+
+static struct i2c_board_info __initdata sdk7786_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("max6900", 0x68),
+ },
+};
+
+static struct platform_device *sh7786_devices[] __initdata = {
+ &heartbeat_device,
+ &smsc911x_device,
+ &smbus_fpga_device,
+ &smbus_pcie_device,
+};
+
+static int sdk7786_i2c_setup(void)
+{
+ unsigned int tmp;
+
+ /*
+ * Hand over I2C control to the FPGA.
+ */
+ tmp = fpga_read_reg(SBCR);
+ tmp &= ~SCBR_I2CCEN;
+ tmp |= SCBR_I2CMEN;
+ fpga_write_reg(tmp, SBCR);
+
+ return i2c_register_board_info(0, sdk7786_i2c_devices,
+ ARRAY_SIZE(sdk7786_i2c_devices));
+}
+
+static int __init sdk7786_devices_setup(void)
+{
+ int ret;
+
+ ret = platform_add_devices(sh7786_devices, ARRAY_SIZE(sh7786_devices));
+ if (unlikely(ret != 0))
+ return ret;
+
+ return sdk7786_i2c_setup();
+}
+__initcall(sdk7786_devices_setup);
+
+static int sdk7786_mode_pins(void)
+{
+ return fpga_read_reg(MODSWR);
+}
+
+static int sdk7786_clk_init(void)
+{
+ struct clk *clk;
+ int ret;
+
+ /*
+ * Only handle the EXTAL case, anyone interfacing a crystal
+ * resonator will need to provide their own input clock.
+ */
+ if (test_mode_pin(MODE_PIN9))
+ return -EINVAL;
+
+ clk = clk_get(NULL, "extal");
+ if (!clk || IS_ERR(clk))
+ return PTR_ERR(clk);
+ ret = clk_set_rate(clk, 33333333);
+ clk_put(clk);
+
+ return ret;
+}
+
+static void sdk7786_restart(char *cmd)
+{
+ fpga_write_reg(0xa5a5, SRSTR);
+}
+
+/* Initialize the board */
+static void __init sdk7786_setup(char **cmdline_p)
+{
+ pr_info("Renesas Technology Europe SDK7786 support:\n");
+
+ sdk7786_fpga_init();
+
+ pr_info("\tPCB revision:\t%d\n", fpga_read_reg(PCBRR) & 0xf);
+
+ machine_ops.restart = sdk7786_restart;
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_sdk7786 __initmv = {
+ .mv_name = "SDK7786",
+ .mv_setup = sdk7786_setup,
+ .mv_mode_pins = sdk7786_mode_pins,
+ .mv_clk_init = sdk7786_clk_init,
+ .mv_init_irq = sdk7786_init_irq,
+};
diff --git a/arch/sh/boards/mach-se/7206/io.c b/arch/sh/boards/mach-se/7206/io.c
index 1804556..adadc77 100644
--- a/arch/sh/boards/mach-se/7206/io.c
+++ b/arch/sh/boards/mach-se/7206/io.c
@@ -16,7 +16,7 @@
static inline void delay(void)
{
- ctrl_inw(0x20000000); /* P2 ROM Area */
+ __raw_readw(0x20000000); /* P2 ROM Area */
}
/* MS7750 requires special versions of in*, out* routines, since
diff --git a/arch/sh/boards/mach-se/7206/irq.c b/arch/sh/boards/mach-se/7206/irq.c
index aef7f05..8d82175 100644
--- a/arch/sh/boards/mach-se/7206/irq.c
+++ b/arch/sh/boards/mach-se/7206/irq.c
@@ -32,12 +32,12 @@
unsigned short msk0,msk1;
/* Set the priority in IPR to 0 */
- val = ctrl_inw(INTC_IPR01);
+ val = __raw_readw(INTC_IPR01);
val &= mask;
- ctrl_outw(val, INTC_IPR01);
+ __raw_writew(val, INTC_IPR01);
/* FPGA mask set */
- msk0 = ctrl_inw(INTMSK0);
- msk1 = ctrl_inw(INTMSK1);
+ msk0 = __raw_readw(INTMSK0);
+ msk1 = __raw_readw(INTMSK1);
switch (irq) {
case IRQ0_IRQ:
@@ -51,8 +51,8 @@
msk1 |= 0x00ff;
break;
}
- ctrl_outw(msk0, INTMSK0);
- ctrl_outw(msk1, INTMSK1);
+ __raw_writew(msk0, INTMSK0);
+ __raw_writew(msk1, INTMSK1);
}
static void enable_se7206_irq(unsigned int irq)
@@ -62,13 +62,13 @@
unsigned short msk0,msk1;
/* Set priority in IPR back to original value */
- val = ctrl_inw(INTC_IPR01);
+ val = __raw_readw(INTC_IPR01);
val |= value;
- ctrl_outw(val, INTC_IPR01);
+ __raw_writew(val, INTC_IPR01);
/* FPGA mask reset */
- msk0 = ctrl_inw(INTMSK0);
- msk1 = ctrl_inw(INTMSK1);
+ msk0 = __raw_readw(INTMSK0);
+ msk1 = __raw_readw(INTMSK1);
switch (irq) {
case IRQ0_IRQ:
@@ -82,19 +82,20 @@
msk1 &= ~0x00ff;
break;
}
- ctrl_outw(msk0, INTMSK0);
- ctrl_outw(msk1, INTMSK1);
+ __raw_writew(msk0, INTMSK0);
+ __raw_writew(msk1, INTMSK1);
}
static void eoi_se7206_irq(unsigned int irq)
{
unsigned short sts0,sts1;
+ struct irq_desc *desc = irq_to_desc(irq);
- if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
+ if (!(desc->status & (IRQ_DISABLED|IRQ_INPROGRESS)))
enable_se7206_irq(irq);
/* FPGA isr clear */
- sts0 = ctrl_inw(INTSTS0);
- sts1 = ctrl_inw(INTSTS1);
+ sts0 = __raw_readw(INTSTS0);
+ sts1 = __raw_readw(INTSTS1);
switch (irq) {
case IRQ0_IRQ:
@@ -108,8 +109,8 @@
sts1 &= ~0x00ff;
break;
}
- ctrl_outw(sts0, INTSTS0);
- ctrl_outw(sts1, INTSTS1);
+ __raw_writew(sts0, INTSTS0);
+ __raw_writew(sts1, INTSTS1);
}
static struct irq_chip se7206_irq_chip __read_mostly = {
@@ -136,11 +137,11 @@
make_se7206_irq(IRQ0_IRQ); /* SMC91C111 */
make_se7206_irq(IRQ1_IRQ); /* ATA */
make_se7206_irq(IRQ3_IRQ); /* SLOT / PCM */
- ctrl_outw(inw(INTC_ICR1) | 0x000b ,INTC_ICR1 ) ; /* ICR1 */
+ __raw_writew(inw(INTC_ICR1) | 0x000b ,INTC_ICR1 ) ; /* ICR1 */
/* FPGA System register setup*/
- ctrl_outw(0x0000,INTSTS0); /* Clear INTSTS0 */
- ctrl_outw(0x0000,INTSTS1); /* Clear INTSTS1 */
+ __raw_writew(0x0000,INTSTS0); /* Clear INTSTS0 */
+ __raw_writew(0x0000,INTSTS1); /* Clear INTSTS1 */
/* IRQ0=LAN, IRQ1=ATA, IRQ3=SLT,PCM */
- ctrl_outw(0x0001,INTSEL);
+ __raw_writew(0x0001,INTSEL);
}
diff --git a/arch/sh/boards/mach-se/7206/setup.c b/arch/sh/boards/mach-se/7206/setup.c
index f5466384..8f5c65d 100644
--- a/arch/sh/boards/mach-se/7206/setup.c
+++ b/arch/sh/boards/mach-se/7206/setup.c
@@ -50,15 +50,12 @@
static struct heartbeat_data heartbeat_data = {
.bit_pos = heartbeat_bit_pos,
.nr_bits = ARRAY_SIZE(heartbeat_bit_pos),
- .regsize = 32,
};
-static struct resource heartbeat_resources[] = {
- [0] = {
- .start = PA_LED,
- .end = PA_LED,
- .flags = IORESOURCE_MEM,
- },
+static struct resource heartbeat_resource = {
+ .start = PA_LED,
+ .end = PA_LED,
+ .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
};
static struct platform_device heartbeat_device = {
@@ -67,8 +64,8 @@
.dev = {
.platform_data = &heartbeat_data,
},
- .num_resources = ARRAY_SIZE(heartbeat_resources),
- .resource = heartbeat_resources,
+ .num_resources = 1,
+ .resource = &heartbeat_resource,
};
static struct platform_device *se7206_devices[] __initdata = {
diff --git a/arch/sh/boards/mach-se/7343/irq.c b/arch/sh/boards/mach-se/7343/irq.c
index 051c29d..d4305c2 100644
--- a/arch/sh/boards/mach-se/7343/irq.c
+++ b/arch/sh/boards/mach-se/7343/irq.c
@@ -16,16 +16,18 @@
#include <linux/io.h>
#include <mach-se/mach/se7343.h>
+unsigned int se7343_fpga_irq[SE7343_FPGA_IRQ_NR] = { 0, };
+
static void disable_se7343_irq(unsigned int irq)
{
- unsigned int bit = irq - SE7343_FPGA_IRQ_BASE;
- ctrl_outw(ctrl_inw(PA_CPLD_IMSK) | 1 << bit, PA_CPLD_IMSK);
+ unsigned int bit = (unsigned int)get_irq_chip_data(irq);
+ __raw_writew(__raw_readw(PA_CPLD_IMSK) | 1 << bit, PA_CPLD_IMSK);
}
static void enable_se7343_irq(unsigned int irq)
{
- unsigned int bit = irq - SE7343_FPGA_IRQ_BASE;
- ctrl_outw(ctrl_inw(PA_CPLD_IMSK) & ~(1 << bit), PA_CPLD_IMSK);
+ unsigned int bit = (unsigned int)get_irq_chip_data(irq);
+ __raw_writew(__raw_readw(PA_CPLD_IMSK) & ~(1 << bit), PA_CPLD_IMSK);
}
static struct irq_chip se7343_irq_chip __read_mostly = {
@@ -37,19 +39,16 @@
static void se7343_irq_demux(unsigned int irq, struct irq_desc *desc)
{
- unsigned short intv = ctrl_inw(PA_CPLD_ST);
- struct irq_desc *ext_desc;
- unsigned int ext_irq = SE7343_FPGA_IRQ_BASE;
+ unsigned short intv = __raw_readw(PA_CPLD_ST);
+ unsigned int ext_irq = 0;
intv &= (1 << SE7343_FPGA_IRQ_NR) - 1;
- while (intv) {
- if (intv & 1) {
- ext_desc = irq_desc + ext_irq;
- handle_level_irq(ext_irq, ext_desc);
- }
- intv >>= 1;
- ext_irq++;
+ for (; intv; intv >>= 1, ext_irq++) {
+ if (!(intv & 1))
+ continue;
+
+ generic_handle_irq(se7343_fpga_irq[ext_irq]);
}
}
@@ -58,16 +57,24 @@
*/
void __init init_7343se_IRQ(void)
{
- int i;
+ int i, irq;
- ctrl_outw(0, PA_CPLD_IMSK); /* disable all irqs */
- ctrl_outw(0x2000, 0xb03fffec); /* mrshpc irq enable */
+ __raw_writew(0, PA_CPLD_IMSK); /* disable all irqs */
+ __raw_writew(0x2000, 0xb03fffec); /* mrshpc irq enable */
- for (i = 0; i < SE7343_FPGA_IRQ_NR; i++)
- set_irq_chip_and_handler_name(SE7343_FPGA_IRQ_BASE + i,
+ for (i = 0; i < SE7343_FPGA_IRQ_NR; i++) {
+ irq = create_irq();
+ if (irq < 0)
+ return;
+ se7343_fpga_irq[i] = irq;
+
+ set_irq_chip_and_handler_name(se7343_fpga_irq[i],
&se7343_irq_chip,
handle_level_irq, "level");
+ set_irq_chip_data(se7343_fpga_irq[i], (void *)i);
+ }
+
set_irq_chained_handler(IRQ0_IRQ, se7343_irq_demux);
set_irq_type(IRQ0_IRQ, IRQ_TYPE_LEVEL_LOW);
set_irq_chained_handler(IRQ1_IRQ, se7343_irq_demux);
diff --git a/arch/sh/boards/mach-se/7343/setup.c b/arch/sh/boards/mach-se/7343/setup.c
index 4de56f3..d2370af 100644
--- a/arch/sh/boards/mach-se/7343/setup.c
+++ b/arch/sh/boards/mach-se/7343/setup.c
@@ -11,26 +11,17 @@
#include <asm/irq.h>
#include <asm/io.h>
-static struct resource heartbeat_resources[] = {
- [0] = {
- .start = PA_LED,
- .end = PA_LED,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct heartbeat_data heartbeat_data = {
- .regsize = 16,
+static struct resource heartbeat_resource = {
+ .start = PA_LED,
+ .end = PA_LED,
+ .flags = IORESOURCE_MEM | IORESOURCE_MEM_16BIT,
};
static struct platform_device heartbeat_device = {
.name = "heartbeat",
.id = -1,
- .dev = {
- .platform_data = &heartbeat_data,
- },
- .num_resources = ARRAY_SIZE(heartbeat_resources),
- .resource = heartbeat_resources,
+ .num_resources = 1,
+ .resource = &heartbeat_resource,
};
static struct mtd_partition nor_flash_partitions[] = {
@@ -82,7 +73,6 @@
.mapbase = 0x16000000,
.regshift = 1,
.flags = ST16C2550C_FLAGS,
- .irq = UARTA_IRQ,
.uartclk = 7372800,
},
[1] = {
@@ -90,7 +80,6 @@
.mapbase = 0x17000000,
.regshift = 1,
.flags = ST16C2550C_FLAGS,
- .irq = UARTB_IRQ,
.uartclk = 7372800,
},
{ },
@@ -121,7 +110,7 @@
.flags = IORESOURCE_MEM,
},
[2] = {
- .start = USB_IRQ,
+ /* Filled in later */
.flags = IORESOURCE_IRQ,
},
};
@@ -138,8 +127,8 @@
static struct platform_device usb_device = {
.name = "isp116x-hcd",
.id = -1,
- .num_resources = ARRAY_SIZE(usb_resources),
- .resource = usb_resources,
+ .num_resources = ARRAY_SIZE(usb_resources),
+ .resource = usb_resources,
.dev = {
.platform_data = &usb_platform_data,
},
@@ -155,6 +144,13 @@
static int __init sh7343se_devices_setup(void)
{
+ /* Wire-up dynamic vectors */
+ serial_platform_data[0].irq = se7343_fpga_irq[SE7343_FPGA_IRQ_UARTA];
+ serial_platform_data[1].irq = se7343_fpga_irq[SE7343_FPGA_IRQ_UARTB];
+
+ usb_resources[2].start = usb_resources[2].end =
+ se7343_fpga_irq[SE7343_FPGA_IRQ_USB];
+
return platform_add_devices(sh7343se_platform_devices,
ARRAY_SIZE(sh7343se_platform_devices));
}
@@ -165,10 +161,10 @@
*/
static void __init sh7343se_setup(char **cmdline_p)
{
- ctrl_outw(0xf900, FPGA_OUT); /* FPGA */
+ __raw_writew(0xf900, FPGA_OUT); /* FPGA */
- ctrl_outw(0x0002, PORT_PECR); /* PORT E 1 = IRQ5 */
- ctrl_outw(0x0020, PORT_PSELD);
+ __raw_writew(0x0002, PORT_PECR); /* PORT E 1 = IRQ5 */
+ __raw_writew(0x0020, PORT_PSELD);
printk(KERN_INFO "MS7343CP01 Setup...done\n");
}
@@ -179,6 +175,5 @@
static struct sh_machine_vector mv_7343se __initmv = {
.mv_name = "SolutionEngine 7343",
.mv_setup = sh7343se_setup,
- .mv_nr_irqs = SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_NR,
.mv_init_irq = init_7343se_IRQ,
};
diff --git a/arch/sh/boards/mach-se/770x/irq.c b/arch/sh/boards/mach-se/770x/irq.c
index ec1fea5..1028c17 100644
--- a/arch/sh/boards/mach-se/770x/irq.c
+++ b/arch/sh/boards/mach-se/770x/irq.c
@@ -96,13 +96,13 @@
void __init init_se_IRQ(void)
{
/* Disable all interrupts */
- ctrl_outw(0, BCR_ILCRA);
- ctrl_outw(0, BCR_ILCRB);
- ctrl_outw(0, BCR_ILCRC);
- ctrl_outw(0, BCR_ILCRD);
- ctrl_outw(0, BCR_ILCRE);
- ctrl_outw(0, BCR_ILCRF);
- ctrl_outw(0, BCR_ILCRG);
+ __raw_writew(0, BCR_ILCRA);
+ __raw_writew(0, BCR_ILCRB);
+ __raw_writew(0, BCR_ILCRC);
+ __raw_writew(0, BCR_ILCRD);
+ __raw_writew(0, BCR_ILCRE);
+ __raw_writew(0, BCR_ILCRF);
+ __raw_writew(0, BCR_ILCRG);
register_ipr_controller(&ipr_irq_desc);
}
diff --git a/arch/sh/boards/mach-se/770x/setup.c b/arch/sh/boards/mach-se/770x/setup.c
index 527eb6b..66d39d1 100644
--- a/arch/sh/boards/mach-se/770x/setup.c
+++ b/arch/sh/boards/mach-se/770x/setup.c
@@ -93,15 +93,12 @@
static struct heartbeat_data heartbeat_data = {
.bit_pos = heartbeat_bit_pos,
.nr_bits = ARRAY_SIZE(heartbeat_bit_pos),
- .regsize = 16,
};
-static struct resource heartbeat_resources[] = {
- [0] = {
- .start = PA_LED,
- .end = PA_LED,
- .flags = IORESOURCE_MEM,
- },
+static struct resource heartbeat_resource = {
+ .start = PA_LED,
+ .end = PA_LED,
+ .flags = IORESOURCE_MEM | IORESOURCE_MEM_16BIT,
};
static struct platform_device heartbeat_device = {
@@ -110,8 +107,8 @@
.dev = {
.platform_data = &heartbeat_data,
},
- .num_resources = ARRAY_SIZE(heartbeat_resources),
- .resource = heartbeat_resources,
+ .num_resources = 1,
+ .resource = &heartbeat_resource,
};
#if defined(CONFIG_CPU_SUBTYPE_SH7710) ||\
diff --git a/arch/sh/boards/mach-se/7721/irq.c b/arch/sh/boards/mach-se/7721/irq.c
index b417acc..d85022e 100644
--- a/arch/sh/boards/mach-se/7721/irq.c
+++ b/arch/sh/boards/mach-se/7721/irq.c
@@ -38,7 +38,7 @@
void __init init_se7721_IRQ(void)
{
/* PPCR */
- ctrl_outw(ctrl_inw(0xa4050118) & ~0x00ff, 0xa4050118);
+ __raw_writew(__raw_readw(0xa4050118) & ~0x00ff, 0xa4050118);
register_intc_controller(&intc_desc);
intc_set_priority(MRSHPC_IRQ0, 0xf - MRSHPC_IRQ0);
diff --git a/arch/sh/boards/mach-se/7721/setup.c b/arch/sh/boards/mach-se/7721/setup.c
index 55af4c3..7416ad7 100644
--- a/arch/sh/boards/mach-se/7721/setup.c
+++ b/arch/sh/boards/mach-se/7721/setup.c
@@ -23,15 +23,12 @@
static struct heartbeat_data heartbeat_data = {
.bit_pos = heartbeat_bit_pos,
.nr_bits = ARRAY_SIZE(heartbeat_bit_pos),
- .regsize = 16,
};
-static struct resource heartbeat_resources[] = {
- [0] = {
- .start = PA_LED,
- .end = PA_LED,
- .flags = IORESOURCE_MEM,
- },
+static struct resource heartbeat_resource = {
+ .start = PA_LED,
+ .end = PA_LED,
+ .flags = IORESOURCE_MEM | IORESOURCE_MEM_16BIT,
};
static struct platform_device heartbeat_device = {
@@ -40,8 +37,8 @@
.dev = {
.platform_data = &heartbeat_data,
},
- .num_resources = ARRAY_SIZE(heartbeat_resources),
- .resource = heartbeat_resources,
+ .num_resources = 1,
+ .resource = &heartbeat_resource,
};
static struct resource cf_ide_resources[] = {
@@ -83,10 +80,10 @@
static void __init se7721_setup(char **cmdline_p)
{
/* for USB */
- ctrl_outw(0x0000, 0xA405010C); /* PGCR */
- ctrl_outw(0x0000, 0xA405010E); /* PHCR */
- ctrl_outw(0x00AA, 0xA4050118); /* PPCR */
- ctrl_outw(0x0000, 0xA4050124); /* PSELA */
+ __raw_writew(0x0000, 0xA405010C); /* PGCR */
+ __raw_writew(0x0000, 0xA405010E); /* PHCR */
+ __raw_writew(0x00AA, 0xA4050118); /* PPCR */
+ __raw_writew(0x0000, 0xA4050124); /* PSELA */
}
/*
diff --git a/arch/sh/boards/mach-se/7722/irq.c b/arch/sh/boards/mach-se/7722/irq.c
index b221b68..61605db 100644
--- a/arch/sh/boards/mach-se/7722/irq.c
+++ b/arch/sh/boards/mach-se/7722/irq.c
@@ -21,13 +21,13 @@
static void disable_se7722_irq(unsigned int irq)
{
unsigned int bit = (unsigned int)get_irq_chip_data(irq);
- ctrl_outw(ctrl_inw(IRQ01_MASK) | 1 << bit, IRQ01_MASK);
+ __raw_writew(__raw_readw(IRQ01_MASK) | 1 << bit, IRQ01_MASK);
}
static void enable_se7722_irq(unsigned int irq)
{
unsigned int bit = (unsigned int)get_irq_chip_data(irq);
- ctrl_outw(ctrl_inw(IRQ01_MASK) & ~(1 << bit), IRQ01_MASK);
+ __raw_writew(__raw_readw(IRQ01_MASK) & ~(1 << bit), IRQ01_MASK);
}
static struct irq_chip se7722_irq_chip __read_mostly = {
@@ -39,7 +39,7 @@
static void se7722_irq_demux(unsigned int irq, struct irq_desc *desc)
{
- unsigned short intv = ctrl_inw(IRQ01_STS);
+ unsigned short intv = __raw_readw(IRQ01_STS);
unsigned int ext_irq = 0;
intv &= (1 << SE7722_FPGA_IRQ_NR) - 1;
@@ -59,8 +59,8 @@
{
int i, irq;
- ctrl_outw(0, IRQ01_MASK); /* disable all irqs */
- ctrl_outw(0x2000, 0xb03fffec); /* mrshpc irq enable */
+ __raw_writew(0, IRQ01_MASK); /* disable all irqs */
+ __raw_writew(0x2000, 0xb03fffec); /* mrshpc irq enable */
for (i = 0; i < SE7722_FPGA_IRQ_NR; i++) {
irq = create_irq();
diff --git a/arch/sh/boards/mach-se/7722/setup.c b/arch/sh/boards/mach-se/7722/setup.c
index b1cb942..80a4e57 100644
--- a/arch/sh/boards/mach-se/7722/setup.c
+++ b/arch/sh/boards/mach-se/7722/setup.c
@@ -25,26 +25,17 @@
#include <cpu/sh7722.h>
/* Heartbeat */
-static struct heartbeat_data heartbeat_data = {
- .regsize = 16,
-};
-
-static struct resource heartbeat_resources[] = {
- [0] = {
- .start = PA_LED,
- .end = PA_LED,
- .flags = IORESOURCE_MEM,
- },
+static struct resource heartbeat_resource = {
+ .start = PA_LED,
+ .end = PA_LED,
+ .flags = IORESOURCE_MEM | IORESOURCE_MEM_16BIT,
};
static struct platform_device heartbeat_device = {
.name = "heartbeat",
.id = -1,
- .dev = {
- .platform_data = &heartbeat_data,
- },
- .num_resources = ARRAY_SIZE(heartbeat_resources),
- .resource = heartbeat_resources,
+ .num_resources = 1,
+ .resource = &heartbeat_resource,
};
/* SMC91x */
@@ -165,32 +156,32 @@
static void __init se7722_setup(char **cmdline_p)
{
- ctrl_outw(0x010D, FPGA_OUT); /* FPGA */
+ __raw_writew(0x010D, FPGA_OUT); /* FPGA */
- ctrl_outw(0x0000, PORT_PECR); /* PORT E 1 = IRQ5 ,E 0 = BS */
- ctrl_outw(0x1000, PORT_PJCR); /* PORT J 1 = IRQ1,J 0 =IRQ0 */
+ __raw_writew(0x0000, PORT_PECR); /* PORT E 1 = IRQ5 ,E 0 = BS */
+ __raw_writew(0x1000, PORT_PJCR); /* PORT J 1 = IRQ1,J 0 =IRQ0 */
/* LCDC I/O */
- ctrl_outw(0x0020, PORT_PSELD);
+ __raw_writew(0x0020, PORT_PSELD);
/* SIOF1*/
- ctrl_outw(0x0003, PORT_PSELB);
- ctrl_outw(0xe000, PORT_PSELC);
- ctrl_outw(0x0000, PORT_PKCR);
+ __raw_writew(0x0003, PORT_PSELB);
+ __raw_writew(0xe000, PORT_PSELC);
+ __raw_writew(0x0000, PORT_PKCR);
/* LCDC */
- ctrl_outw(0x4020, PORT_PHCR);
- ctrl_outw(0x0000, PORT_PLCR);
- ctrl_outw(0x0000, PORT_PMCR);
- ctrl_outw(0x0002, PORT_PRCR);
- ctrl_outw(0x0000, PORT_PXCR); /* LCDC,CS6A */
+ __raw_writew(0x4020, PORT_PHCR);
+ __raw_writew(0x0000, PORT_PLCR);
+ __raw_writew(0x0000, PORT_PMCR);
+ __raw_writew(0x0002, PORT_PRCR);
+ __raw_writew(0x0000, PORT_PXCR); /* LCDC,CS6A */
/* KEYSC */
- ctrl_outw(0x0A10, PORT_PSELA); /* BS,SHHID2 */
- ctrl_outw(0x0000, PORT_PYCR);
- ctrl_outw(0x0000, PORT_PZCR);
- ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x4000, PORT_HIZCRA);
- ctrl_outw(ctrl_inw(PORT_HIZCRC) & ~0xc000, PORT_HIZCRC);
+ __raw_writew(0x0A10, PORT_PSELA); /* BS,SHHID2 */
+ __raw_writew(0x0000, PORT_PYCR);
+ __raw_writew(0x0000, PORT_PZCR);
+ __raw_writew(__raw_readw(PORT_HIZCRA) & ~0x4000, PORT_HIZCRA);
+ __raw_writew(__raw_readw(PORT_HIZCRC) & ~0xc000, PORT_HIZCRC);
}
/*
diff --git a/arch/sh/boards/mach-se/7724/irq.c b/arch/sh/boards/mach-se/7724/irq.c
index f76cf3b..0942be2 100644
--- a/arch/sh/boards/mach-se/7724/irq.c
+++ b/arch/sh/boards/mach-se/7724/irq.c
@@ -72,14 +72,14 @@
{
struct fpga_irq set = get_fpga_irq(fpga2irq(irq));
unsigned int bit = irq - set.base;
- ctrl_outw(ctrl_inw(set.mraddr) | 0x0001 << bit, set.mraddr);
+ __raw_writew(__raw_readw(set.mraddr) | 0x0001 << bit, set.mraddr);
}
static void enable_se7724_irq(unsigned int irq)
{
struct fpga_irq set = get_fpga_irq(fpga2irq(irq));
unsigned int bit = irq - set.base;
- ctrl_outw(ctrl_inw(set.mraddr) & ~(0x0001 << bit), set.mraddr);
+ __raw_writew(__raw_readw(set.mraddr) & ~(0x0001 << bit), set.mraddr);
}
static struct irq_chip se7724_irq_chip __read_mostly = {
@@ -92,19 +92,16 @@
static void se7724_irq_demux(unsigned int irq, struct irq_desc *desc)
{
struct fpga_irq set = get_fpga_irq(irq);
- unsigned short intv = ctrl_inw(set.sraddr);
- struct irq_desc *ext_desc;
+ unsigned short intv = __raw_readw(set.sraddr);
unsigned int ext_irq = set.base;
intv &= set.mask;
- while (intv) {
- if (intv & 0x0001) {
- ext_desc = irq_desc + ext_irq;
- handle_level_irq(ext_irq, ext_desc);
- }
- intv >>= 1;
- ext_irq++;
+ for (; intv; intv >>= 1, ext_irq++) {
+ if (!(intv & 1))
+ continue;
+
+ generic_handle_irq(ext_irq);
}
}
@@ -113,20 +110,39 @@
*/
void __init init_se7724_IRQ(void)
{
- int i;
+ int i, nid = cpu_to_node(boot_cpu_data);
- ctrl_outw(0xffff, IRQ0_MR); /* mask all */
- ctrl_outw(0xffff, IRQ1_MR); /* mask all */
- ctrl_outw(0xffff, IRQ2_MR); /* mask all */
- ctrl_outw(0x0000, IRQ0_SR); /* clear irq */
- ctrl_outw(0x0000, IRQ1_SR); /* clear irq */
- ctrl_outw(0x0000, IRQ2_SR); /* clear irq */
- ctrl_outw(0x002a, IRQ_MODE); /* set irq type */
+ __raw_writew(0xffff, IRQ0_MR); /* mask all */
+ __raw_writew(0xffff, IRQ1_MR); /* mask all */
+ __raw_writew(0xffff, IRQ2_MR); /* mask all */
+ __raw_writew(0x0000, IRQ0_SR); /* clear irq */
+ __raw_writew(0x0000, IRQ1_SR); /* clear irq */
+ __raw_writew(0x0000, IRQ2_SR); /* clear irq */
+ __raw_writew(0x002a, IRQ_MODE); /* set irq type */
- for (i = 0; i < SE7724_FPGA_IRQ_NR; i++)
- set_irq_chip_and_handler_name(SE7724_FPGA_IRQ_BASE + i,
+ for (i = 0; i < SE7724_FPGA_IRQ_NR; i++) {
+ int irq, wanted;
+
+ wanted = SE7724_FPGA_IRQ_BASE + i;
+
+ irq = create_irq_nr(wanted, nid);
+ if (unlikely(irq == 0)) {
+ pr_err("%s: failed hooking irq %d for FPGA\n",
+ __func__, wanted);
+ return;
+ }
+
+ if (unlikely(irq != wanted)) {
+ pr_err("%s: got irq %d but wanted %d, bailing.\n",
+ __func__, irq, wanted);
+ destroy_irq(irq);
+ return;
+ }
+
+ set_irq_chip_and_handler_name(irq,
&se7724_irq_chip,
handle_level_irq, "level");
+ }
set_irq_chained_handler(IRQ0_IRQ, se7724_irq_demux);
set_irq_type(IRQ0_IRQ, IRQ_TYPE_LEVEL_LOW);
diff --git a/arch/sh/boards/mach-se/7724/sdram.S b/arch/sh/boards/mach-se/7724/sdram.S
index 9040167..6fa4734 100644
--- a/arch/sh/boards/mach-se/7724/sdram.S
+++ b/arch/sh/boards/mach-se/7724/sdram.S
@@ -39,6 +39,10 @@
/* DBSC: put memory in auto-refresh mode */
+ mov.l @(SH_SLEEP_MODE, r5), r0
+ tst #SUSP_SH_RSTANDBY, r0
+ bf resume_rstandby
+
ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
WAIT 1
ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
@@ -49,4 +53,79 @@
rts
nop
+resume_rstandby:
+
+ /* CPG: setup clocks before restarting external memory */
+
+ ED 0xA4150024, 0x00004000 /* PLLCR */
+
+ mov.l FRQCRA,r0
+ mov.l @r0,r3
+ mov.l KICK,r1
+ or r1, r3
+ mov.l r3, @r0
+
+ mov.l LSTATS,r0
+ mov #1,r1
+WAIT_LSTATS:
+ mov.l @r0,r3
+ tst r1,r3
+ bf WAIT_LSTATS
+
+ /* DBSC: re-initialize and put in auto-refresh */
+
+ ED 0xFD000108, 0x00000181 /* DBPDCNT0 */
+ ED 0xFD000020, 0x015B0002 /* DBCONF */
+ ED 0xFD000030, 0x03071502 /* DBTR0 */
+ ED 0xFD000034, 0x02020102 /* DBTR1 */
+ ED 0xFD000038, 0x01090405 /* DBTR2 */
+ ED 0xFD00003C, 0x00000002 /* DBTR3 */
+ ED 0xFD000008, 0x00000005 /* DBKIND */
+ ED 0xFD000040, 0x00000001 /* DBRFPDN0 */
+ ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
+ ED 0xFD000018, 0x00000001 /* DBCKECNT */
+
+ mov #100,r0
+WAIT_400NS:
+ dt r0
+ bf WAIT_400NS
+
+ ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
+ ED 0xFD000060, 0x00020000 /* DBMRCNT (EMR2) */
+ ED 0xFD000060, 0x00030000 /* DBMRCNT (EMR3) */
+ ED 0xFD000060, 0x00010004 /* DBMRCNT (EMR) */
+ ED 0xFD000060, 0x00000532 /* DBMRCNT (MRS) */
+ ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
+ ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
+ ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
+ ED 0xFD000060, 0x00000432 /* DBMRCNT (MRS) */
+ ED 0xFD000060, 0x000103c0 /* DBMRCNT (EMR) */
+ ED 0xFD000060, 0x00010040 /* DBMRCNT (EMR) */
+
+ mov #100,r0
+WAIT_400NS_2:
+ dt r0
+ bf WAIT_400NS_2
+
+ ED 0xFD000010, 0x00000001 /* DBEN */
+ ED 0xFD000044, 0x0000050f /* DBRFPDN1 */
+ ED 0xFD000048, 0x236800e6 /* DBRFPDN2 */
+
+ mov.l DUMMY,r0
+ mov.l @r0, r1 /* force single dummy read */
+
+ ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
+ ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
+ ED 0xFD000108, 0x00000080 /* DBPDCNT0 */
+ ED 0xFD000040, 0x00010000 /* DBRFPDN0 */
+
+ rts
+ nop
+
+ .balign 4
+DUMMY: .long 0xac400000
+FRQCRA: .long 0xa4150000
+KICK: .long 0x80000000
+LSTATS: .long 0xa4150060
+
ENTRY(ms7724se_sdram_leave_end)
diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
index 858ecb2..66cdbc3 100644
--- a/arch/sh/boards/mach-se/7724/setup.c
+++ b/arch/sh/boards/mach-se/7724/setup.c
@@ -53,26 +53,17 @@
*/
/* Heartbeat */
-static struct heartbeat_data heartbeat_data = {
- .regsize = 16,
-};
-
-static struct resource heartbeat_resources[] = {
- [0] = {
- .start = PA_LED,
- .end = PA_LED,
- .flags = IORESOURCE_MEM,
- },
+static struct resource heartbeat_resource = {
+ .start = PA_LED,
+ .end = PA_LED,
+ .flags = IORESOURCE_MEM | IORESOURCE_MEM_16BIT,
};
static struct platform_device heartbeat_device = {
.name = "heartbeat",
.id = -1,
- .dev = {
- .platform_data = &heartbeat_data,
- },
- .num_resources = ARRAY_SIZE(heartbeat_resources),
- .resource = heartbeat_resources,
+ .num_resources = 1,
+ .resource = &heartbeat_resource,
};
/* LAN91C111 */
@@ -265,12 +256,12 @@
#define FCLKACR 0xa4150008
static void fsimck_init(struct clk *clk)
{
- u32 status = ctrl_inl(clk->enable_reg);
+ u32 status = __raw_readl(clk->enable_reg);
/* use external clock */
status &= ~0x000000ff;
status |= 0x00000080;
- ctrl_outl(status, clk->enable_reg);
+ __raw_writel(status, clk->enable_reg);
}
static struct clk_ops fsimck_clk_ops = {
@@ -322,7 +313,7 @@
/* KEYSC in SoC (Needs SW33-2 set to ON) */
static struct sh_keysc_info keysc_info = {
.mode = SH_KEYSC_MODE_1,
- .scan_timing = 10,
+ .scan_timing = 3,
.delay = 50,
.keycodes = {
KEY_1, KEY_2, KEY_3, KEY_4, KEY_5,
@@ -460,7 +451,7 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = 101,
+ .start = 100,
.flags = IORESOURCE_IRQ,
},
};
@@ -483,7 +474,7 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = 24,
+ .start = 23,
.flags = IORESOURCE_IRQ,
},
};
@@ -498,6 +489,26 @@
},
};
+/* IrDA */
+static struct resource irda_resources[] = {
+ [0] = {
+ .name = "IrDA",
+ .start = 0xA45D0000,
+ .end = 0xA45D0049,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 20,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device irda_device = {
+ .name = "sh_sir",
+ .num_resources = ARRAY_SIZE(irda_resources),
+ .resource = irda_resources,
+};
+
static struct platform_device *ms7724se_devices[] __initdata = {
&heartbeat_device,
&smc91x_eth_device,
@@ -512,6 +523,7 @@
&fsi_device,
&sdhi0_cn7_device,
&sdhi1_cn8_device,
+ &irda_device,
};
/* I2C device */
@@ -531,7 +543,7 @@
int t = 10000;
while (t--) {
- if (!ctrl_inw(EEPROM_STAT))
+ if (!__raw_readw(EEPROM_STAT))
return 1;
udelay(1);
}
@@ -551,13 +563,13 @@
/* read MAC addr from EEPROM */
for (i = 0 ; i < 3 ; i++) {
- ctrl_outw(0x0, EEPROM_OP); /* read */
- ctrl_outw(i*2, EEPROM_ADR);
- ctrl_outw(0x1, EEPROM_STRT);
+ __raw_writew(0x0, EEPROM_OP); /* read */
+ __raw_writew(i*2, EEPROM_ADR);
+ __raw_writew(0x1, EEPROM_STRT);
if (!sh_eth_is_eeprom_ready())
return;
- mac = ctrl_inw(EEPROM_DATA);
+ mac = __raw_readw(EEPROM_DATA);
sh_eth_plat.mac_addr[i << 1] = mac & 0xff;
sh_eth_plat.mac_addr[(i << 1) + 1] = mac >> 8;
}
@@ -594,28 +606,29 @@
static int __init devices_setup(void)
{
- u16 sw = ctrl_inw(SW4140); /* select camera, monitor */
- struct clk *fsia_clk;
+ u16 sw = __raw_readw(SW4140); /* select camera, monitor */
+ struct clk *clk;
/* register board specific self-refresh code */
- sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF,
+ sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF |
+ SUSP_SH_RSTANDBY,
&ms7724se_sdram_enter_start,
&ms7724se_sdram_enter_end,
&ms7724se_sdram_leave_start,
&ms7724se_sdram_leave_end);
/* Reset Release */
- ctrl_outw(ctrl_inw(FPGA_OUT) &
+ __raw_writew(__raw_readw(FPGA_OUT) &
~((1 << 1) | /* LAN */
(1 << 6) | /* VIDEO DAC */
(1 << 7) | /* AK4643 */
+ (1 << 8) | /* IrDA */
(1 << 12) | /* USB0 */
(1 << 14)), /* RMII */
FPGA_OUT);
/* turn on USB clocks, use external clock */
- ctrl_outw((ctrl_inw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB);
+ __raw_writew((__raw_readw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB);
-#ifdef CONFIG_PM
/* Let LED9 show STATUS2 */
gpio_request(GPIO_FN_STATUS2, NULL);
@@ -624,28 +637,12 @@
/* Lit LED11 show PDSTATUS */
gpio_request(GPIO_FN_PDSTATUS, NULL);
-#else
- /* Lit LED9 */
- gpio_request(GPIO_PTJ6, NULL);
- gpio_direction_output(GPIO_PTJ6, 1);
- gpio_export(GPIO_PTJ6, 0);
-
- /* Lit LED10 */
- gpio_request(GPIO_PTJ5, NULL);
- gpio_direction_output(GPIO_PTJ5, 1);
- gpio_export(GPIO_PTJ5, 0);
-
- /* Lit LED11 */
- gpio_request(GPIO_PTJ7, NULL);
- gpio_direction_output(GPIO_PTJ7, 1);
- gpio_export(GPIO_PTJ7, 0);
-#endif
/* enable USB0 port */
- ctrl_outw(0x0600, 0xa40501d4);
+ __raw_writew(0x0600, 0xa40501d4);
/* enable USB1 port */
- ctrl_outw(0x0600, 0xa4050192);
+ __raw_writew(0x0600, 0xa4050192);
/* enable IRQ 0,1,2 */
gpio_request(GPIO_FN_INTC_IRQ0, NULL);
@@ -693,7 +690,7 @@
gpio_request(GPIO_FN_LCDVCPWC, NULL);
gpio_request(GPIO_FN_LCDRD, NULL);
gpio_request(GPIO_FN_LCDLCLK, NULL);
- ctrl_outw((ctrl_inw(PORT_HIZA) & ~0x0001), PORT_HIZA);
+ __raw_writew((__raw_readw(PORT_HIZA) & ~0x0001), PORT_HIZA);
/* enable CEU0 */
gpio_request(GPIO_FN_VIO0_D15, NULL);
@@ -764,13 +761,18 @@
gpio_request(GPIO_FN_CLKAUDIOBO, NULL);
gpio_request(GPIO_FN_FSIIASD, NULL);
+ /* set SPU2 clock to 83.4 MHz */
+ clk = clk_get(NULL, "spu_clk");
+ clk_set_rate(clk, clk_round_rate(clk, 83333333));
+ clk_put(clk);
+
/* change parent of FSI A */
- fsia_clk = clk_get(NULL, "fsia_clk");
+ clk = clk_get(NULL, "fsia_clk");
clk_register(&fsimcka_clk);
- clk_set_parent(fsia_clk, &fsimcka_clk);
- clk_set_rate(fsia_clk, 11000);
+ clk_set_parent(clk, &fsimcka_clk);
+ clk_set_rate(clk, 11000);
clk_set_rate(&fsimcka_clk, 11000);
- clk_put(fsia_clk);
+ clk_put(clk);
/* SDHI0 connected to cn7 */
gpio_request(GPIO_FN_SDHI0CD, NULL);
@@ -792,6 +794,10 @@
gpio_request(GPIO_FN_SDHI1CMD, NULL);
gpio_request(GPIO_FN_SDHI1CLK, NULL);
+ /* enable IrDA */
+ gpio_request(GPIO_FN_IRDA_OUT, NULL);
+ gpio_request(GPIO_FN_IRDA_IN, NULL);
+
/*
* enable SH-Eth
*
diff --git a/arch/sh/boards/mach-se/7780/irq.c b/arch/sh/boards/mach-se/7780/irq.c
index 121744c..d5c9edc 100644
--- a/arch/sh/boards/mach-se/7780/irq.c
+++ b/arch/sh/boards/mach-se/7780/irq.c
@@ -24,30 +24,30 @@
void __init init_se7780_IRQ(void)
{
/* enable all interrupt at FPGA */
- ctrl_outw(0, FPGA_INTMSK1);
+ __raw_writew(0, FPGA_INTMSK1);
/* mask SM501 interrupt */
- ctrl_outw((ctrl_inw(FPGA_INTMSK1) | 0x0002), FPGA_INTMSK1);
+ __raw_writew((__raw_readw(FPGA_INTMSK1) | 0x0002), FPGA_INTMSK1);
/* enable all interrupt at FPGA */
- ctrl_outw(0, FPGA_INTMSK2);
+ __raw_writew(0, FPGA_INTMSK2);
/* set FPGA INTSEL register */
/* FPGA + 0x06 */
- ctrl_outw( ((IRQPIN_SM501 << IRQPOS_SM501) |
+ __raw_writew( ((IRQPIN_SM501 << IRQPOS_SM501) |
(IRQPIN_SMC91CX << IRQPOS_SMC91CX)), FPGA_INTSEL1);
/* FPGA + 0x08 */
- ctrl_outw(((IRQPIN_EXTINT4 << IRQPOS_EXTINT4) |
+ __raw_writew(((IRQPIN_EXTINT4 << IRQPOS_EXTINT4) |
(IRQPIN_EXTINT3 << IRQPOS_EXTINT3) |
(IRQPIN_EXTINT2 << IRQPOS_EXTINT2) |
(IRQPIN_EXTINT1 << IRQPOS_EXTINT1)), FPGA_INTSEL2);
/* FPGA + 0x0A */
- ctrl_outw((IRQPIN_PCCPW << IRQPOS_PCCPW), FPGA_INTSEL3);
+ __raw_writew((IRQPIN_PCCPW << IRQPOS_PCCPW), FPGA_INTSEL3);
plat_irq_setup_pins(IRQ_MODE_IRQ); /* install handlers for IRQ0-7 */
/* ICR1: detect low level(for 2ndcut) */
- ctrl_outl(0xAAAA0000, INTC_ICR1);
+ __raw_writel(0xAAAA0000, INTC_ICR1);
/*
* FPGA PCISEL register initialize
@@ -63,6 +63,6 @@
* INTD || INTD | INTC | -- | INTA
* -------------------------------------
*/
- ctrl_outw(0x0013, FPGA_PCI_INTSEL1);
- ctrl_outw(0xE402, FPGA_PCI_INTSEL2);
+ __raw_writew(0x0013, FPGA_PCI_INTSEL1);
+ __raw_writew(0xE402, FPGA_PCI_INTSEL2);
}
diff --git a/arch/sh/boards/mach-se/7780/setup.c b/arch/sh/boards/mach-se/7780/setup.c
index 1d3a867..6f7c207 100644
--- a/arch/sh/boards/mach-se/7780/setup.c
+++ b/arch/sh/boards/mach-se/7780/setup.c
@@ -17,26 +17,17 @@
#include <asm/heartbeat.h>
/* Heartbeat */
-static struct heartbeat_data heartbeat_data = {
- .regsize = 16,
-};
-
-static struct resource heartbeat_resources[] = {
- [0] = {
- .start = PA_LED,
- .end = PA_LED,
- .flags = IORESOURCE_MEM,
- },
+static struct resource heartbeat_resource = {
+ .start = PA_LED,
+ .end = PA_LED,
+ .flags = IORESOURCE_MEM | IORESOURCE_MEM_16BIT,
};
static struct platform_device heartbeat_device = {
.name = "heartbeat",
.id = -1,
- .dev = {
- .platform_data = &heartbeat_data,
- },
- .num_resources = ARRAY_SIZE(heartbeat_resources),
- .resource = heartbeat_resources,
+ .num_resources = 1,
+ .resource = &heartbeat_resource,
};
/* SMC91x */
@@ -84,14 +75,14 @@
static void __init se7780_setup(char **cmdline_p)
{
/* "SH-Linux" on LED Display */
- ctrl_outw( 'S' , PA_LED_DISP + (DISP_SEL0_ADDR << 1) );
- ctrl_outw( 'H' , PA_LED_DISP + (DISP_SEL1_ADDR << 1) );
- ctrl_outw( '-' , PA_LED_DISP + (DISP_SEL2_ADDR << 1) );
- ctrl_outw( 'L' , PA_LED_DISP + (DISP_SEL3_ADDR << 1) );
- ctrl_outw( 'i' , PA_LED_DISP + (DISP_SEL4_ADDR << 1) );
- ctrl_outw( 'n' , PA_LED_DISP + (DISP_SEL5_ADDR << 1) );
- ctrl_outw( 'u' , PA_LED_DISP + (DISP_SEL6_ADDR << 1) );
- ctrl_outw( 'x' , PA_LED_DISP + (DISP_SEL7_ADDR << 1) );
+ __raw_writew( 'S' , PA_LED_DISP + (DISP_SEL0_ADDR << 1) );
+ __raw_writew( 'H' , PA_LED_DISP + (DISP_SEL1_ADDR << 1) );
+ __raw_writew( '-' , PA_LED_DISP + (DISP_SEL2_ADDR << 1) );
+ __raw_writew( 'L' , PA_LED_DISP + (DISP_SEL3_ADDR << 1) );
+ __raw_writew( 'i' , PA_LED_DISP + (DISP_SEL4_ADDR << 1) );
+ __raw_writew( 'n' , PA_LED_DISP + (DISP_SEL5_ADDR << 1) );
+ __raw_writew( 'u' , PA_LED_DISP + (DISP_SEL6_ADDR << 1) );
+ __raw_writew( 'x' , PA_LED_DISP + (DISP_SEL7_ADDR << 1) );
printk(KERN_INFO "Hitachi UL Solutions Engine 7780SE03 support.\n");
@@ -102,15 +93,15 @@
* REQ2/GNT2 -> Serial ATA
* REQ3/GNT3 -> PCI slot
*/
- ctrl_outw(0x0213, FPGA_REQSEL);
+ __raw_writew(0x0213, FPGA_REQSEL);
/* GPIO setting */
- ctrl_outw(0x0000, GPIO_PECR);
- ctrl_outw(ctrl_inw(GPIO_PHCR)&0xfff3, GPIO_PHCR);
- ctrl_outw(0x0c00, GPIO_PMSELR);
+ __raw_writew(0x0000, GPIO_PECR);
+ __raw_writew(__raw_readw(GPIO_PHCR)&0xfff3, GPIO_PHCR);
+ __raw_writew(0x0c00, GPIO_PMSELR);
/* iVDR Power ON */
- ctrl_outw(0x0001, FPGA_IVDRPW);
+ __raw_writew(0x0001, FPGA_IVDRPW);
}
/*
diff --git a/arch/sh/boards/mach-sh03/rtc.c b/arch/sh/boards/mach-sh03/rtc.c
index a8b9f84..1b20099 100644
--- a/arch/sh/boards/mach-sh03/rtc.c
+++ b/arch/sh/boards/mach-sh03/rtc.c
@@ -44,15 +44,15 @@
spin_lock(&sh03_rtc_lock);
again:
do {
- sec = (ctrl_inb(RTC_SEC1) & 0xf) + (ctrl_inb(RTC_SEC10) & 0x7) * 10;
- min = (ctrl_inb(RTC_MIN1) & 0xf) + (ctrl_inb(RTC_MIN10) & 0xf) * 10;
- hour = (ctrl_inb(RTC_HOU1) & 0xf) + (ctrl_inb(RTC_HOU10) & 0xf) * 10;
- day = (ctrl_inb(RTC_DAY1) & 0xf) + (ctrl_inb(RTC_DAY10) & 0xf) * 10;
- mon = (ctrl_inb(RTC_MON1) & 0xf) + (ctrl_inb(RTC_MON10) & 0xf) * 10;
- year = (ctrl_inb(RTC_YEA1) & 0xf) + (ctrl_inb(RTC_YEA10) & 0xf) * 10
- + (ctrl_inb(RTC_YEA100 ) & 0xf) * 100
- + (ctrl_inb(RTC_YEA1000) & 0xf) * 1000;
- } while (sec != (ctrl_inb(RTC_SEC1) & 0xf) + (ctrl_inb(RTC_SEC10) & 0x7) * 10);
+ sec = (__raw_readb(RTC_SEC1) & 0xf) + (__raw_readb(RTC_SEC10) & 0x7) * 10;
+ min = (__raw_readb(RTC_MIN1) & 0xf) + (__raw_readb(RTC_MIN10) & 0xf) * 10;
+ hour = (__raw_readb(RTC_HOU1) & 0xf) + (__raw_readb(RTC_HOU10) & 0xf) * 10;
+ day = (__raw_readb(RTC_DAY1) & 0xf) + (__raw_readb(RTC_DAY10) & 0xf) * 10;
+ mon = (__raw_readb(RTC_MON1) & 0xf) + (__raw_readb(RTC_MON10) & 0xf) * 10;
+ year = (__raw_readb(RTC_YEA1) & 0xf) + (__raw_readb(RTC_YEA10) & 0xf) * 10
+ + (__raw_readb(RTC_YEA100 ) & 0xf) * 100
+ + (__raw_readb(RTC_YEA1000) & 0xf) * 1000;
+ } while (sec != (__raw_readb(RTC_SEC1) & 0xf) + (__raw_readb(RTC_SEC10) & 0x7) * 10);
if (year == 0 || mon < 1 || mon > 12 || day > 31 || day < 1 ||
hour > 23 || min > 59 || sec > 59) {
printk(KERN_ERR
@@ -60,16 +60,16 @@
printk("year=%d, mon=%d, day=%d, hour=%d, min=%d, sec=%d\n",
year, mon, day, hour, min, sec);
- ctrl_outb(0, RTC_SEC1); ctrl_outb(0, RTC_SEC10);
- ctrl_outb(0, RTC_MIN1); ctrl_outb(0, RTC_MIN10);
- ctrl_outb(0, RTC_HOU1); ctrl_outb(0, RTC_HOU10);
- ctrl_outb(6, RTC_WEE1);
- ctrl_outb(1, RTC_DAY1); ctrl_outb(0, RTC_DAY10);
- ctrl_outb(1, RTC_MON1); ctrl_outb(0, RTC_MON10);
- ctrl_outb(0, RTC_YEA1); ctrl_outb(0, RTC_YEA10);
- ctrl_outb(0, RTC_YEA100);
- ctrl_outb(2, RTC_YEA1000);
- ctrl_outb(0, RTC_CTL);
+ __raw_writeb(0, RTC_SEC1); __raw_writeb(0, RTC_SEC10);
+ __raw_writeb(0, RTC_MIN1); __raw_writeb(0, RTC_MIN10);
+ __raw_writeb(0, RTC_HOU1); __raw_writeb(0, RTC_HOU10);
+ __raw_writeb(6, RTC_WEE1);
+ __raw_writeb(1, RTC_DAY1); __raw_writeb(0, RTC_DAY10);
+ __raw_writeb(1, RTC_MON1); __raw_writeb(0, RTC_MON10);
+ __raw_writeb(0, RTC_YEA1); __raw_writeb(0, RTC_YEA10);
+ __raw_writeb(0, RTC_YEA100);
+ __raw_writeb(2, RTC_YEA1000);
+ __raw_writeb(0, RTC_CTL);
goto again;
}
@@ -93,9 +93,9 @@
/* gets recalled with irq locally disabled */
spin_lock(&sh03_rtc_lock);
for (i = 0 ; i < 1000000 ; i++) /* may take up to 1 second... */
- if (!(ctrl_inb(RTC_CTL) & RTC_BUSY))
+ if (!(__raw_readb(RTC_CTL) & RTC_BUSY))
break;
- cmos_minutes = (ctrl_inb(RTC_MIN1) & 0xf) + (ctrl_inb(RTC_MIN10) & 0xf) * 10;
+ cmos_minutes = (__raw_readb(RTC_MIN1) & 0xf) + (__raw_readb(RTC_MIN10) & 0xf) * 10;
real_seconds = nowtime % 60;
real_minutes = nowtime / 60;
if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1)
@@ -103,10 +103,10 @@
real_minutes %= 60;
if (abs(real_minutes - cmos_minutes) < 30) {
- ctrl_outb(real_seconds % 10, RTC_SEC1);
- ctrl_outb(real_seconds / 10, RTC_SEC10);
- ctrl_outb(real_minutes % 10, RTC_MIN1);
- ctrl_outb(real_minutes / 10, RTC_MIN10);
+ __raw_writeb(real_seconds % 10, RTC_SEC1);
+ __raw_writeb(real_seconds / 10, RTC_SEC10);
+ __raw_writeb(real_minutes % 10, RTC_MIN1);
+ __raw_writeb(real_minutes / 10, RTC_MIN10);
} else {
printk(KERN_WARNING
"set_rtc_mmss: can't update from %d to %d\n",
diff --git a/arch/sh/boards/mach-sh03/setup.c b/arch/sh/boards/mach-sh03/setup.c
index 74cfb4b..af4a0c0 100644
--- a/arch/sh/boards/mach-sh03/setup.c
+++ b/arch/sh/boards/mach-sh03/setup.c
@@ -82,7 +82,7 @@
/* open I/O area window */
paddrbase = virt_to_phys((void *)PA_AREA5_IO);
prot = PAGE_KERNEL_PCC(1, _PAGE_PCC_IO16);
- cf_ide_base = p3_ioremap(paddrbase, PAGE_SIZE, prot.pgprot);
+ cf_ide_base = ioremap_prot(paddrbase, PAGE_SIZE, pgprot_val(prot));
if (!cf_ide_base) {
printk("allocate_cf_area : can't open CF I/O window!\n");
return -ENOMEM;
diff --git a/arch/sh/boards/mach-sh7763rdp/irq.c b/arch/sh/boards/mach-sh7763rdp/irq.c
index d8ebfa7..add698c 100644
--- a/arch/sh/boards/mach-sh7763rdp/irq.c
+++ b/arch/sh/boards/mach-sh7763rdp/irq.c
@@ -28,18 +28,18 @@
void __init init_sh7763rdp_IRQ(void)
{
/* GPIO enabled */
- ctrl_outl(1 << 25, INTC_INT2MSKCR);
+ __raw_writel(1 << 25, INTC_INT2MSKCR);
/* enable GPIO interrupts */
- ctrl_outl((ctrl_inl(INTC_INT2PRI7) & 0xFF00FFFF) | 0x000F0000,
+ __raw_writel((__raw_readl(INTC_INT2PRI7) & 0xFF00FFFF) | 0x000F0000,
INTC_INT2PRI7);
/* USBH enabled */
- ctrl_outl(1 << 17, INTC_INT2MSKCR1);
+ __raw_writel(1 << 17, INTC_INT2MSKCR1);
/* GETHER enabled */
- ctrl_outl(1 << 16, INTC_INT2MSKCR1);
+ __raw_writel(1 << 16, INTC_INT2MSKCR1);
/* DMAC enabled */
- ctrl_outl(1 << 8, INTC_INT2MSKCR);
+ __raw_writel(1 << 8, INTC_INT2MSKCR);
}
diff --git a/arch/sh/boards/mach-sh7763rdp/setup.c b/arch/sh/boards/mach-sh7763rdp/setup.c
index 390534a..f64a691 100644
--- a/arch/sh/boards/mach-sh7763rdp/setup.c
+++ b/arch/sh/boards/mach-sh7763rdp/setup.c
@@ -158,50 +158,50 @@
static void __init sh7763rdp_setup(char **cmdline_p)
{
/* Board version check */
- if (ctrl_inw(CPLD_BOARD_ID_ERV_REG) == 0xECB1)
+ if (__raw_readw(CPLD_BOARD_ID_ERV_REG) == 0xECB1)
printk(KERN_INFO "RTE Standard Configuration\n");
else
printk(KERN_INFO "RTA Standard Configuration\n");
/* USB pin select bits (clear bit 5-2 to 0) */
- ctrl_outw((ctrl_inw(PORT_PSEL2) & 0xFFC3), PORT_PSEL2);
+ __raw_writew((__raw_readw(PORT_PSEL2) & 0xFFC3), PORT_PSEL2);
/* USBH setup port I controls to other (clear bits 4-9 to 0) */
- ctrl_outw(ctrl_inw(PORT_PICR) & 0xFC0F, PORT_PICR);
+ __raw_writew(__raw_readw(PORT_PICR) & 0xFC0F, PORT_PICR);
/* Select USB Host controller */
- ctrl_outw(0x00, USB_USBHSC);
+ __raw_writew(0x00, USB_USBHSC);
/* For LCD */
/* set PTJ7-1, bits 15-2 of PJCR to 0 */
- ctrl_outw(ctrl_inw(PORT_PJCR) & 0x0003, PORT_PJCR);
+ __raw_writew(__raw_readw(PORT_PJCR) & 0x0003, PORT_PJCR);
/* set PTI5, bits 11-10 of PICR to 0 */
- ctrl_outw(ctrl_inw(PORT_PICR) & 0xF3FF, PORT_PICR);
- ctrl_outw(0, PORT_PKCR);
- ctrl_outw(0, PORT_PLCR);
+ __raw_writew(__raw_readw(PORT_PICR) & 0xF3FF, PORT_PICR);
+ __raw_writew(0, PORT_PKCR);
+ __raw_writew(0, PORT_PLCR);
/* set PSEL2 bits 14-8, 5-4, of PSEL2 to 0 */
- ctrl_outw((ctrl_inw(PORT_PSEL2) & 0x00C0), PORT_PSEL2);
+ __raw_writew((__raw_readw(PORT_PSEL2) & 0x00C0), PORT_PSEL2);
/* set PSEL3 bits 14-12, 6-4, 2-0 of PSEL3 to 0 */
- ctrl_outw((ctrl_inw(PORT_PSEL3) & 0x0700), PORT_PSEL3);
+ __raw_writew((__raw_readw(PORT_PSEL3) & 0x0700), PORT_PSEL3);
/* For HAC */
/* bit3-0 0100:HAC & SSI1 enable */
- ctrl_outw((ctrl_inw(PORT_PSEL1) & 0xFFF0) | 0x0004, PORT_PSEL1);
+ __raw_writew((__raw_readw(PORT_PSEL1) & 0xFFF0) | 0x0004, PORT_PSEL1);
/* bit14 1:SSI_HAC_CLK enable */
- ctrl_outw(ctrl_inw(PORT_PSEL4) | 0x4000, PORT_PSEL4);
+ __raw_writew(__raw_readw(PORT_PSEL4) | 0x4000, PORT_PSEL4);
/* SH-Ether */
- ctrl_outw((ctrl_inw(PORT_PSEL1) & ~0xff00) | 0x2400, PORT_PSEL1);
- ctrl_outw(0x0, PORT_PFCR);
- ctrl_outw(0x0, PORT_PFCR);
- ctrl_outw(0x0, PORT_PFCR);
+ __raw_writew((__raw_readw(PORT_PSEL1) & ~0xff00) | 0x2400, PORT_PSEL1);
+ __raw_writew(0x0, PORT_PFCR);
+ __raw_writew(0x0, PORT_PFCR);
+ __raw_writew(0x0, PORT_PFCR);
/* MMC */
/*selects SCIF and MMC other functions */
- ctrl_outw(0x0001, PORT_PSEL0);
+ __raw_writew(0x0001, PORT_PSEL0);
/* MMC clock operates */
- ctrl_outl(ctrl_inl(MSTPCR1) & ~0x8, MSTPCR1);
- ctrl_outw(ctrl_inw(PORT_PACR) & ~0x3000, PORT_PACR);
- ctrl_outw(ctrl_inw(PORT_PCCR) & ~0xCFC3, PORT_PCCR);
+ __raw_writel(__raw_readl(MSTPCR1) & ~0x8, MSTPCR1);
+ __raw_writew(__raw_readw(PORT_PACR) & ~0x3000, PORT_PACR);
+ __raw_writew(__raw_readw(PORT_PCCR) & ~0xCFC3, PORT_PCCR);
}
static struct sh_machine_vector mv_sh7763rdp __initmv = {
diff --git a/arch/sh/boards/mach-snapgear/setup.c b/arch/sh/boards/mach-snapgear/setup.c
index a3277a2..331745d 100644
--- a/arch/sh/boards/mach-snapgear/setup.c
+++ b/arch/sh/boards/mach-snapgear/setup.c
@@ -30,7 +30,7 @@
static irqreturn_t eraseconfig_interrupt(int irq, void *dev_id)
{
- (void)ctrl_inb(0xb8000000); /* dummy read */
+ (void)__raw_readb(0xb8000000); /* dummy read */
printk("SnapGear: erase switch interrupt!\n");
diff --git a/arch/sh/boards/mach-systemh/irq.c b/arch/sh/boards/mach-systemh/irq.c
index 986a0e7..523aea5 100644
--- a/arch/sh/boards/mach-systemh/irq.c
+++ b/arch/sh/boards/mach-systemh/irq.c
@@ -41,13 +41,13 @@
unsigned long val, mask = 0x01 << 1;
/* Clear the "irq"th bit in the mask and set it in the request */
- val = ctrl_inl((unsigned long)systemh_irq_mask_register);
+ val = __raw_readl((unsigned long)systemh_irq_mask_register);
val &= ~mask;
- ctrl_outl(val, (unsigned long)systemh_irq_mask_register);
+ __raw_writel(val, (unsigned long)systemh_irq_mask_register);
- val = ctrl_inl((unsigned long)systemh_irq_request_register);
+ val = __raw_readl((unsigned long)systemh_irq_request_register);
val |= mask;
- ctrl_outl(val, (unsigned long)systemh_irq_request_register);
+ __raw_writel(val, (unsigned long)systemh_irq_request_register);
}
}
@@ -57,9 +57,9 @@
unsigned long val, mask = 0x01 << 1;
/* Set "irq"th bit in the mask register */
- val = ctrl_inl((unsigned long)systemh_irq_mask_register);
+ val = __raw_readl((unsigned long)systemh_irq_mask_register);
val |= mask;
- ctrl_outl(val, (unsigned long)systemh_irq_mask_register);
+ __raw_writel(val, (unsigned long)systemh_irq_mask_register);
}
}
diff --git a/arch/sh/boards/mach-titan/Makefile b/arch/sh/boards/mach-titan/Makefile
deleted file mode 100644
index 08d7537..0000000
--- a/arch/sh/boards/mach-titan/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for the Nimble Microsystems TITAN specific parts of the kernel
-#
-
-obj-y := setup.o io.o
diff --git a/arch/sh/boards/mach-titan/io.c b/arch/sh/boards/mach-titan/io.c
deleted file mode 100644
index 0130e98..0000000
--- a/arch/sh/boards/mach-titan/io.c
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- * I/O routines for Titan
- */
-#include <linux/pci.h>
-#include <asm/machvec.h>
-#include <asm/addrspace.h>
-#include <mach/titan.h>
-#include <asm/io.h>
-
-static inline unsigned int port2adr(unsigned int port)
-{
- maybebadio((unsigned long)port);
- return port;
-}
-
-u8 titan_inb(unsigned long port)
-{
- if (PXSEG(port))
- return ctrl_inb(port);
- return ctrl_inw(port2adr(port)) & 0xff;
-}
-
-u8 titan_inb_p(unsigned long port)
-{
- u8 v;
-
- if (PXSEG(port))
- v = ctrl_inb(port);
- else
- v = ctrl_inw(port2adr(port)) & 0xff;
- ctrl_delay();
- return v;
-}
-
-u16 titan_inw(unsigned long port)
-{
- if (PXSEG(port))
- return ctrl_inw(port);
- else if (port >= 0x2000)
- return ctrl_inw(port2adr(port));
- else
- maybebadio(port);
- return 0;
-}
-
-u32 titan_inl(unsigned long port)
-{
- if (PXSEG(port))
- return ctrl_inl(port);
- else if (port >= 0x2000)
- return ctrl_inw(port2adr(port));
- else
- maybebadio(port);
- return 0;
-}
-
-void titan_outb(u8 value, unsigned long port)
-{
- if (PXSEG(port))
- ctrl_outb(value, port);
- else
- ctrl_outw(value, port2adr(port));
-}
-
-void titan_outb_p(u8 value, unsigned long port)
-{
- if (PXSEG(port))
- ctrl_outb(value, port);
- else
- ctrl_outw(value, port2adr(port));
- ctrl_delay();
-}
-
-void titan_outw(u16 value, unsigned long port)
-{
- if (PXSEG(port))
- ctrl_outw(value, port);
- else if (port >= 0x2000)
- ctrl_outw(value, port2adr(port));
- else
- maybebadio(port);
-}
-
-void titan_outl(u32 value, unsigned long port)
-{
- if (PXSEG(port))
- ctrl_outl(value, port);
- else
- maybebadio(port);
-}
-
-void titan_insl(unsigned long port, void *dst, unsigned long count)
-{
- maybebadio(port);
-}
-
-void titan_outsl(unsigned long port, const void *src, unsigned long count)
-{
- maybebadio(port);
-}
-
-void __iomem *titan_ioport_map(unsigned long port, unsigned int size)
-{
- if (PXSEG(port))
- return (void __iomem *)port;
-
- return (void __iomem *)port2adr(port);
-}
diff --git a/arch/sh/boards/mach-titan/setup.c b/arch/sh/boards/mach-titan/setup.c
deleted file mode 100644
index 81e7e0f..0000000
--- a/arch/sh/boards/mach-titan/setup.c
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * arch/sh/boards/titan/setup.c - Setup for Titan
- *
- * Copyright (C) 2006 Jamie Lenehan
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <mach/titan.h>
-#include <asm/io.h>
-
-static void __init init_titan_irq(void)
-{
- /* enable individual interrupt mode for externals */
- plat_irq_setup_pins(IRQ_MODE_IRQ);
-}
-
-static struct sh_machine_vector mv_titan __initmv = {
- .mv_name = "Titan",
-
- .mv_inb = titan_inb,
- .mv_inw = titan_inw,
- .mv_inl = titan_inl,
- .mv_outb = titan_outb,
- .mv_outw = titan_outw,
- .mv_outl = titan_outl,
-
- .mv_inb_p = titan_inb_p,
- .mv_inw_p = titan_inw,
- .mv_inl_p = titan_inl,
- .mv_outb_p = titan_outb_p,
- .mv_outw_p = titan_outw,
- .mv_outl_p = titan_outl,
-
- .mv_insl = titan_insl,
- .mv_outsl = titan_outsl,
-
- .mv_ioport_map = titan_ioport_map,
-
- .mv_init_irq = init_titan_irq,
-};
diff --git a/arch/sh/boards/mach-x3proto/ilsel.c b/arch/sh/boards/mach-x3proto/ilsel.c
index b5c673c..5c98427 100644
--- a/arch/sh/boards/mach-x3proto/ilsel.c
+++ b/arch/sh/boards/mach-x3proto/ilsel.c
@@ -70,10 +70,10 @@
pr_debug("%s: bit#%d: addr - 0x%08lx (shift %d, set %d)\n",
__func__, bit, addr, shift, set);
- tmp = ctrl_inw(addr);
+ tmp = __raw_readw(addr);
tmp &= ~(0xf << shift);
tmp |= set << shift;
- ctrl_outw(tmp, addr);
+ __raw_writew(tmp, addr);
}
/**
@@ -142,9 +142,9 @@
addr = mk_ilsel_addr(irq);
- tmp = ctrl_inw(addr);
+ tmp = __raw_readw(addr);
tmp &= ~(0xf << mk_ilsel_shift(irq));
- ctrl_outw(tmp, addr);
+ __raw_writew(tmp, addr);
clear_bit(irq, &ilsel_level_map);
}
diff --git a/arch/sh/boards/mach-x3proto/setup.c b/arch/sh/boards/mach-x3proto/setup.c
index efe4cb9..e284592 100644
--- a/arch/sh/boards/mach-x3proto/setup.c
+++ b/arch/sh/boards/mach-x3proto/setup.c
@@ -149,7 +149,7 @@
plat_irq_setup_pins(IRQ_MODE_IRL3210);
/* Set ICR0.LVLMODE */
- ctrl_outl(ctrl_inl(0xfe410000) | (1 << 21), 0xfe410000);
+ __raw_writel(__raw_readl(0xfe410000) | (1 << 21), 0xfe410000);
}
static struct sh_machine_vector mv_x3proto __initmv = {
diff --git a/arch/sh/boot/Makefile b/arch/sh/boot/Makefile
index cb8cf55..1ce6362 100644
--- a/arch/sh/boot/Makefile
+++ b/arch/sh/boot/Makefile
@@ -21,12 +21,15 @@
CONFIG_ENTRY_OFFSET ?= 0x00001000
suffix-y := bin
-suffix-$(CONFIG_KERNEL_GZIP) := gz
-suffix-$(CONFIG_KERNEL_BZIP2) := bz2
-suffix-$(CONFIG_KERNEL_LZMA) := lzma
+suffix-$(CONFIG_KERNEL_GZIP) := gz
+suffix-$(CONFIG_KERNEL_BZIP2) := bz2
+suffix-$(CONFIG_KERNEL_LZMA) := lzma
+suffix-$(CONFIG_KERNEL_LZO) := lzo
-targets := zImage vmlinux.srec romImage uImage uImage.srec uImage.gz uImage.bz2 uImage.lzma uImage.bin
-extra-y += vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma
+targets := zImage vmlinux.srec romImage uImage uImage.srec uImage.gz \
+ uImage.bz2 uImage.lzma uImage.lzo uImage.bin
+extra-y += vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma \
+ vmlinux.bin.lzo
subdir- := compressed romimage
$(obj)/zImage: $(obj)/compressed/vmlinux FORCE
@@ -43,15 +46,8 @@
$(obj)/romimage/vmlinux: $(obj)/zImage FORCE
$(Q)$(MAKE) $(build)=$(obj)/romimage $@
-KERNEL_MEMORY := 0x00000000
-ifeq ($(CONFIG_PMB_FIXED),y)
-KERNEL_MEMORY := $(shell /bin/bash -c 'printf "0x%08x" \
+KERNEL_MEMORY := $(shell /bin/bash -c 'printf "0x%08x" \
$$[$(CONFIG_MEMORY_START) & 0x1fffffff]')
-endif
-ifeq ($(CONFIG_29BIT),y)
-KERNEL_MEMORY := $(shell /bin/bash -c 'printf "0x%08x" \
- $$[$(CONFIG_MEMORY_START)]')
-endif
KERNEL_LOAD := $(shell /bin/bash -c 'printf "0x%08x" \
$$[$(CONFIG_PAGE_OFFSET) + \
@@ -80,6 +76,9 @@
$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE
$(call if_changed,lzma)
+$(obj)/vmlinux.bin.lzo: $(obj)/vmlinux.bin FORCE
+ $(call if_changed,lzo)
+
$(obj)/uImage.bz2: $(obj)/vmlinux.bin.bz2
$(call if_changed,uimage,bzip2)
@@ -89,6 +88,9 @@
$(obj)/uImage.lzma: $(obj)/vmlinux.bin.lzma
$(call if_changed,uimage,lzma)
+$(obj)/uImage.lzo: $(obj)/vmlinux.bin.lzo
+ $(call if_changed,uimage,lzo)
+
$(obj)/uImage.bin: $(obj)/vmlinux.bin
$(call if_changed,uimage,none)
diff --git a/arch/sh/boot/compressed/Makefile b/arch/sh/boot/compressed/Makefile
index 6182eca..5d660b9 100644
--- a/arch/sh/boot/compressed/Makefile
+++ b/arch/sh/boot/compressed/Makefile
@@ -6,14 +6,11 @@
targets := vmlinux vmlinux.bin vmlinux.bin.gz \
vmlinux.bin.bz2 vmlinux.bin.lzma \
+ vmlinux.bin.lzo \
head_$(BITS).o misc.o piggy.o
OBJECTS = $(obj)/head_$(BITS).o $(obj)/misc.o $(obj)/cache.o
-ifdef CONFIG_SH_STANDARD_BIOS
-OBJECTS += $(obj)/../../kernel/sh_bios.o
-endif
-
#
# IMAGE_OFFSET is the load offset of the compression loader
#
@@ -47,6 +44,8 @@
$(call if_changed,bzip2)
$(obj)/vmlinux.bin.lzma: $(vmlinux.bin.all-y) FORCE
$(call if_changed,lzma)
+$(obj)/vmlinux.bin.lzo: $(vmlinux.bin.all-y) FORCE
+ $(call if_changed,lzo)
OBJCOPYFLAGS += -R .empty_zero_page
diff --git a/arch/sh/boot/compressed/misc.c b/arch/sh/boot/compressed/misc.c
index b51b1fc..27140a6 100644
--- a/arch/sh/boot/compressed/misc.c
+++ b/arch/sh/boot/compressed/misc.c
@@ -14,7 +14,6 @@
#include <asm/uaccess.h>
#include <asm/addrspace.h>
#include <asm/page.h>
-#include <asm/sh_bios.h>
/*
* gzip declarations
@@ -62,29 +61,15 @@
#include "../../../../lib/decompress_unlzma.c"
#endif
-#ifdef CONFIG_SH_STANDARD_BIOS
-size_t strlen(const char *s)
-{
- int i = 0;
+#ifdef CONFIG_KERNEL_LZO
+#include "../../../../lib/decompress_unlzo.c"
+#endif
- while (*s++)
- i++;
- return i;
-}
-
-int puts(const char *s)
-{
- int len = strlen(s);
- sh_bios_console_write(s, len);
- return len;
-}
-#else
int puts(const char *s)
{
/* This should be updated to use the sh-sci routines */
return 0;
}
-#endif
void* memset(void* s, int c, size_t n)
{
@@ -132,7 +117,7 @@
output_addr = (CONFIG_MEMORY_START + 0x2000);
#else
output_addr = __pa((unsigned long)&_text+PAGE_SIZE);
-#ifdef CONFIG_29BIT
+#if defined(CONFIG_29BIT)
output_addr |= P2SEG;
#endif
#endif
diff --git a/arch/sh/cchips/hd6446x/hd64461.c b/arch/sh/cchips/hd6446x/hd64461.c
index 50aa0c1..bcb31ae8 100644
--- a/arch/sh/cchips/hd6446x/hd64461.c
+++ b/arch/sh/cchips/hd6446x/hd64461.c
@@ -55,25 +55,22 @@
static void hd64461_irq_demux(unsigned int irq, struct irq_desc *desc)
{
- unsigned short intv = ctrl_inw(HD64461_NIRR);
- struct irq_desc *ext_desc;
+ unsigned short intv = __raw_readw(HD64461_NIRR);
unsigned int ext_irq = HD64461_IRQBASE;
intv &= (1 << HD64461_IRQ_NUM) - 1;
- while (intv) {
- if (intv & 1) {
- ext_desc = irq_desc + ext_irq;
- handle_level_irq(ext_irq, ext_desc);
- }
- intv >>= 1;
- ext_irq++;
+ for (; intv; intv >>= 1, ext_irq++) {
+ if (!(intv & 1))
+ continue;
+
+ generic_handle_irq(ext_irq);
}
}
int __init setup_hd64461(void)
{
- int i;
+ int i, nid = cpu_to_node(boot_cpu_data);
if (!MACH_HD64461)
return 0;
@@ -90,9 +87,26 @@
__raw_writew(0xffff, HD64461_NIMR);
/* IRQ 80 -> 95 belongs to HD64461 */
- for (i = HD64461_IRQBASE; i < HD64461_IRQBASE + 16; i++)
+ for (i = HD64461_IRQBASE; i < HD64461_IRQBASE + 16; i++) {
+ unsigned int irq;
+
+ irq = create_irq_nr(i, nid);
+ if (unlikely(irq == 0)) {
+ pr_err("%s: failed hooking irq %d for HD64461\n",
+ __func__, i);
+ return -EBUSY;
+ }
+
+ if (unlikely(irq != i)) {
+ pr_err("%s: got irq %d but wanted %d, bailing.\n",
+ __func__, irq, i);
+ destroy_irq(irq);
+ return -EINVAL;
+ }
+
set_irq_chip_and_handler(i, &hd64461_irq_chip,
handle_level_irq);
+ }
set_irq_chained_handler(CONFIG_HD64461_IRQ, hd64461_irq_demux);
set_irq_type(CONFIG_HD64461_IRQ, IRQ_TYPE_LEVEL_LOW);
diff --git a/arch/sh/configs/sdk7786_defconfig b/arch/sh/configs/sdk7786_defconfig
new file mode 100644
index 0000000..9b331ea
--- /dev/null
+++ b/arch/sh/configs/sdk7786_defconfig
@@ -0,0 +1,1754 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.33-rc7
+# Tue Feb 9 15:27:06 2010
+#
+CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_IRQ_PER_CPU=y
+CONFIG_SPARSE_IRQ=y
+# CONFIG_GENERIC_GPIO is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_SYS_SUPPORTS_HUGETLBFS=y
+CONFIG_SYS_SUPPORTS_SMP=y
+CONFIG_SYS_SUPPORTS_NUMA=y
+CONFIG_SYS_SUPPORTS_PCI=y
+CONFIG_SYS_SUPPORTS_TMU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_DMA_COHERENT=y
+# CONFIG_DMA_NONCOHERENT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+CONFIG_RCU_TRACE=y
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+CONFIG_TREE_RCU_TRACE=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_CGROUPS=y
+# CONFIG_CGROUP_DEBUG is not set
+CONFIG_CGROUP_NS=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+# CONFIG_CPUSETS is not set
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_CGROUP_MEM_RES_CTLR=y
+# CONFIG_CGROUP_MEM_RES_CTLR_SWAP is not set
+CONFIG_MM_OWNER=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_USER_NS=y
+CONFIG_PID_NS=y
+CONFIG_NET_NS=y
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+# CONFIG_PERF_COUNTERS is not set
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+# CONFIG_OPROFILE is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+CONFIG_BLK_CGROUP=y
+# CONFIG_DEBUG_BLK_CGROUP is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_CFQ_GROUP_IOSCHED=y
+# CONFIG_DEBUG_CFQ_IOSCHED is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+CONFIG_FREEZER=y
+
+#
+# System type
+#
+CONFIG_CPU_SH4=y
+CONFIG_CPU_SH4A=y
+CONFIG_CPU_SHX3=y
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+CONFIG_CPU_SUBTYPE_SH7786=y
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
+# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+
+#
+# Memory management options
+#
+CONFIG_QUICKLIST=y
+CONFIG_MMU=y
+CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_MEMORY_START=0x60000000
+CONFIG_MEMORY_SIZE=0x20000000
+# CONFIG_29BIT is not set
+CONFIG_32BIT=y
+CONFIG_PMB=y
+# CONFIG_PMB_LEGACY is not set
+CONFIG_X2TLB=y
+CONFIG_VSYSCALL=y
+# CONFIG_NUMA is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_ARCH_MEMORY_PROBE=y
+CONFIG_IOREMAP_FIXED=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_64K is not set
+# CONFIG_HUGETLB_PAGE_SIZE_256K is not set
+CONFIG_HUGETLB_PAGE_SIZE_1MB=y
+# CONFIG_HUGETLB_PAGE_SIZE_4MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_64MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_512MB is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_STATIC=y
+CONFIG_MEMORY_HOTPLUG=y
+CONFIG_MEMORY_HOTPLUG_SPARSE=y
+CONFIG_MEMORY_HOTREMOVE=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=1
+CONFIG_KSM=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+
+#
+# Cache configuration
+#
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_SH_FPU=y
+CONFIG_SH_STORE_QUEUES=y
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_PTEAEX=y
+CONFIG_CPU_HAS_FPU=y
+
+#
+# Board support
+#
+CONFIG_SH_SDK7786=y
+# CONFIG_SH_URQUELL is not set
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_TIMER_TMU=y
+CONFIG_SH_CLK_CPG=y
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=m
+CONFIG_CPU_FREQ_GOV_ONDEMAND=m
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
+CONFIG_SH_CPU_FREQ=y
+
+#
+# DMA support
+#
+# CONFIG_SH_DMA is not set
+
+#
+# Companion Chips
+#
+
+#
+# Additional SuperH Device Drivers
+#
+CONFIG_HEARTBEAT=y
+# CONFIG_PUSH_SWITCH is not set
+
+#
+# Kernel features
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_SCHED_HRTICK=y
+CONFIG_KEXEC=y
+# CONFIG_CRASH_DUMP is not set
+CONFIG_SECCOMP=y
+# CONFIG_SMP is not set
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_GUSA=y
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+CONFIG_ENTRY_OFFSET=0x00001000
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
+CONFIG_CMDLINE="console=ttySC1,115200 earlyprintk=sh-sci.1,115200 root=/dev/sda1 nmi_debug=state,debounce rootdelay=10"
+
+#
+# Bus options
+#
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+CONFIG_PCIEAER_INJECT=y
+CONFIG_PCIEASPM=y
+CONFIG_PCIEASPM_DEBUG=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCI_LEGACY is not set
+CONFIG_PCI_DEBUG=y
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options (EXPERIMENTAL)
+#
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+CONFIG_PM_VERBOSE=y
+# CONFIG_HIBERNATION is not set
+CONFIG_PM_RUNTIME=y
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
+# CONFIG_PHANTOM is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_FCOE is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
+# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
+CONFIG_SATA_PMP=y
+# CONFIG_SATA_AHCI is not set
+CONFIG_SATA_SIL24=y
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+CONFIG_PATA_PLATFORM=y
+# CONFIG_PATA_SCH is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# The newer stack is recommended.
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+CONFIG_MDIO_BITBANG=y
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_STNIC is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+CONFIG_SMC91X=y
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+CONFIG_SMSC911X=y
+# CONFIG_DNET is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_ATL2 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+CONFIG_WLAN=y
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_SH_KEYSC is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_SENTELIC is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=6
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_COMPAT is not set
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SH_MOBILE is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_SH_MSIOF is not set
+# CONFIG_SPI_SH_SCI is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_SH_WDT is not set
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_SH_MOBILE_SDHI is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_AB4500_CORE is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+CONFIG_VGA_ARB=y
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
+# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+CONFIG_USB_GADGET_M66592=y
+CONFIG_USB_M66592=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_MASS_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_MULTI is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_UWB is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+CONFIG_RTC_DRV_MAX6900=y
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_SH=y
+# CONFIG_RTC_DRV_GENERIC is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+CONFIG_UIO=m
+# CONFIG_UIO_CIF is not set
+# CONFIG_UIO_PDRV is not set
+# CONFIG_UIO_PDRV_GENIRQ is not set
+# CONFIG_UIO_SMX is not set
+# CONFIG_UIO_AEC is not set
+# CONFIG_UIO_SERCOS3 is not set
+# CONFIG_UIO_PCI_GENERIC is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+CONFIG_HUGETLBFS=y
+CONFIG_HUGETLB_PAGE=y
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+CONFIG_DEBUG_VM=y
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_FTRACE_SYSCALLS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+CONFIG_KSYM_TRACER=y
+# CONFIG_PROFILE_KSYM_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_RING_BUFFER_BENCHMARK is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_SH_STANDARD_BIOS is not set
+# CONFIG_STACK_DEBUG is not set
+CONFIG_DEBUG_STACK_USAGE=y
+# CONFIG_4KSTACKS is not set
+CONFIG_DUMP_CODE=y
+CONFIG_DWARF_UNWINDER=y
+# CONFIG_SH_NO_BSS_INIT is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+CONFIG_BINARY_PRINTF=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/drivers/dma/dma-pvr2.c b/arch/sh/drivers/dma/dma-pvr2.c
index 391cbe1..3cee58e 100644
--- a/arch/sh/drivers/dma/dma-pvr2.c
+++ b/arch/sh/drivers/dma/dma-pvr2.c
@@ -40,10 +40,10 @@
static int pvr2_request_dma(struct dma_channel *chan)
{
- if (ctrl_inl(PVR2_DMA_MODE) != 0)
+ if (__raw_readl(PVR2_DMA_MODE) != 0)
return -EBUSY;
- ctrl_outl(0, PVR2_DMA_LMMODE0);
+ __raw_writel(0, PVR2_DMA_LMMODE0);
return 0;
}
@@ -60,9 +60,9 @@
xfer_complete = 0;
- ctrl_outl(chan->dar, PVR2_DMA_ADDR);
- ctrl_outl(chan->count, PVR2_DMA_COUNT);
- ctrl_outl(chan->mode & DMA_MODE_MASK, PVR2_DMA_MODE);
+ __raw_writel(chan->dar, PVR2_DMA_ADDR);
+ __raw_writel(chan->count, PVR2_DMA_COUNT);
+ __raw_writel(chan->mode & DMA_MODE_MASK, PVR2_DMA_MODE);
return 0;
}
diff --git a/arch/sh/drivers/dma/dma-sh.c b/arch/sh/drivers/dma/dma-sh.c
index 37fb5b8..8272087 100644
--- a/arch/sh/drivers/dma/dma-sh.c
+++ b/arch/sh/drivers/dma/dma-sh.c
@@ -52,11 +52,14 @@
*
* iterations to complete the transfer.
*/
+static unsigned int ts_shift[] = TS_SHIFT;
static inline unsigned int calc_xmit_shift(struct dma_channel *chan)
{
- u32 chcr = ctrl_inl(dma_base_addr[chan->chan] + CHCR);
+ u32 chcr = __raw_readl(dma_base_addr[chan->chan] + CHCR);
+ int cnt = ((chcr & CHCR_TS_LOW_MASK) >> CHCR_TS_LOW_SHIFT) |
+ ((chcr & CHCR_TS_HIGH_MASK) >> CHCR_TS_HIGH_SHIFT);
- return ts_shift[(chcr & CHCR_TS_MASK)>>CHCR_TS_SHIFT];
+ return ts_shift[cnt];
}
/*
@@ -70,13 +73,13 @@
struct dma_channel *chan = dev_id;
u32 chcr;
- chcr = ctrl_inl(dma_base_addr[chan->chan] + CHCR);
+ chcr = __raw_readl(dma_base_addr[chan->chan] + CHCR);
if (!(chcr & CHCR_TE))
return IRQ_NONE;
chcr &= ~(CHCR_IE | CHCR_DE);
- ctrl_outl(chcr, (dma_base_addr[chan->chan] + CHCR));
+ __raw_writel(chcr, (dma_base_addr[chan->chan] + CHCR));
wake_up(&chan->wait_queue);
@@ -115,7 +118,7 @@
chan->flags &= ~DMA_TEI_CAPABLE;
}
- ctrl_outl(chcr, (dma_base_addr[chan->chan] + CHCR));
+ __raw_writel(chcr, (dma_base_addr[chan->chan] + CHCR));
chan->flags |= DMA_CONFIGURED;
return 0;
@@ -126,13 +129,13 @@
int irq;
u32 chcr;
- chcr = ctrl_inl(dma_base_addr[chan->chan] + CHCR);
+ chcr = __raw_readl(dma_base_addr[chan->chan] + CHCR);
chcr |= CHCR_DE;
if (chan->flags & DMA_TEI_CAPABLE)
chcr |= CHCR_IE;
- ctrl_outl(chcr, (dma_base_addr[chan->chan] + CHCR));
+ __raw_writel(chcr, (dma_base_addr[chan->chan] + CHCR));
if (chan->flags & DMA_TEI_CAPABLE) {
irq = get_dmte_irq(chan->chan);
@@ -150,9 +153,9 @@
disable_irq(irq);
}
- chcr = ctrl_inl(dma_base_addr[chan->chan] + CHCR);
+ chcr = __raw_readl(dma_base_addr[chan->chan] + CHCR);
chcr &= ~(CHCR_DE | CHCR_TE | CHCR_IE);
- ctrl_outl(chcr, (dma_base_addr[chan->chan] + CHCR));
+ __raw_writel(chcr, (dma_base_addr[chan->chan] + CHCR));
}
static int sh_dmac_xfer_dma(struct dma_channel *chan)
@@ -183,12 +186,12 @@
*/
if (chan->sar || (mach_is_dreamcast() &&
chan->chan == PVR2_CASCADE_CHAN))
- ctrl_outl(chan->sar, (dma_base_addr[chan->chan]+SAR));
+ __raw_writel(chan->sar, (dma_base_addr[chan->chan]+SAR));
if (chan->dar || (mach_is_dreamcast() &&
chan->chan == PVR2_CASCADE_CHAN))
- ctrl_outl(chan->dar, (dma_base_addr[chan->chan] + DAR));
+ __raw_writel(chan->dar, (dma_base_addr[chan->chan] + DAR));
- ctrl_outl(chan->count >> calc_xmit_shift(chan),
+ __raw_writel(chan->count >> calc_xmit_shift(chan),
(dma_base_addr[chan->chan] + TCR));
sh_dmac_enable_dma(chan);
@@ -198,10 +201,10 @@
static int sh_dmac_get_dma_residue(struct dma_channel *chan)
{
- if (!(ctrl_inl(dma_base_addr[chan->chan] + CHCR) & CHCR_DE))
+ if (!(__raw_readl(dma_base_addr[chan->chan] + CHCR) & CHCR_DE))
return 0;
- return ctrl_inl(dma_base_addr[chan->chan] + TCR)
+ return __raw_readl(dma_base_addr[chan->chan] + TCR)
<< calc_xmit_shift(chan);
}
diff --git a/arch/sh/drivers/dma/dmabrg.c b/arch/sh/drivers/dma/dmabrg.c
index 5e22689..72622e3 100644
--- a/arch/sh/drivers/dma/dmabrg.c
+++ b/arch/sh/drivers/dma/dmabrg.c
@@ -86,8 +86,8 @@
unsigned long dcr;
unsigned int i;
- dcr = ctrl_inl(DMABRGCR);
- ctrl_outl(dcr & ~0x00ff0003, DMABRGCR); /* ack all */
+ dcr = __raw_readl(DMABRGCR);
+ __raw_writel(dcr & ~0x00ff0003, DMABRGCR); /* ack all */
dcr &= dcr >> 8; /* ignore masked */
/* USB stuff, get it out of the way first */
@@ -109,17 +109,17 @@
static void dmabrg_disable_irq(unsigned int dmairq)
{
unsigned long dcr;
- dcr = ctrl_inl(DMABRGCR);
+ dcr = __raw_readl(DMABRGCR);
dcr &= ~(1 << ((dmairq > 1) ? dmairq + 22 : dmairq + 8));
- ctrl_outl(dcr, DMABRGCR);
+ __raw_writel(dcr, DMABRGCR);
}
static void dmabrg_enable_irq(unsigned int dmairq)
{
unsigned long dcr;
- dcr = ctrl_inl(DMABRGCR);
+ dcr = __raw_readl(DMABRGCR);
dcr |= (1 << ((dmairq > 1) ? dmairq + 22 : dmairq + 8));
- ctrl_outl(dcr, DMABRGCR);
+ __raw_writel(dcr, DMABRGCR);
}
int dmabrg_request_irq(unsigned int dmairq, void(*handler)(void*),
@@ -165,13 +165,13 @@
printk(KERN_INFO "DMABRG: DMAC ch0 not reserved!\n");
#endif
- ctrl_outl(0, DMABRGCR);
- ctrl_outl(0, DMACHCR0);
- ctrl_outl(0x94000000, DMARSRA); /* enable DMABRG in DMAC 0 */
+ __raw_writel(0, DMABRGCR);
+ __raw_writel(0, DMACHCR0);
+ __raw_writel(0x94000000, DMARSRA); /* enable DMABRG in DMAC 0 */
/* enable DMABRG mode, enable the DMAC */
- or = ctrl_inl(DMAOR);
- ctrl_outl(or | DMAOR_BRG | DMAOR_DMEN, DMAOR);
+ or = __raw_readl(DMAOR);
+ __raw_writel(or | DMAOR_BRG | DMAOR_DMEN, DMAOR);
ret = request_irq(DMABRGI0, dmabrg_irq, IRQF_DISABLED,
"DMABRG USB address error", NULL);
diff --git a/arch/sh/drivers/heartbeat.c b/arch/sh/drivers/heartbeat.c
index a9339a6..2acbc79 100644
--- a/arch/sh/drivers/heartbeat.c
+++ b/arch/sh/drivers/heartbeat.c
@@ -1,7 +1,7 @@
/*
* Generic heartbeat driver for regular LED banks
*
- * Copyright (C) 2007 Paul Mundt
+ * Copyright (C) 2007 - 2010 Paul Mundt
*
* Most SH reference boards include a number of individual LEDs that can
* be independently controlled (either via a pre-defined hardware
@@ -27,7 +27,7 @@
#include <asm/heartbeat.h>
#define DRV_NAME "heartbeat"
-#define DRV_VERSION "0.1.1"
+#define DRV_VERSION "0.1.2"
static unsigned char default_bit_pos[] = { 0, 1, 2, 3, 4, 5, 6, 7 };
@@ -98,7 +98,7 @@
return -ENOMEM;
}
- hd->base = ioremap_nocache(res->start, res->end - res->start + 1);
+ hd->base = ioremap_nocache(res->start, resource_size(res));
if (unlikely(!hd->base)) {
dev_err(&pdev->dev, "ioremap failed\n");
@@ -117,8 +117,20 @@
for (i = 0; i < hd->nr_bits; i++)
hd->mask |= (1 << hd->bit_pos[i]);
- if (!hd->regsize)
- hd->regsize = 8; /* default access size */
+ if (!hd->regsize) {
+ switch (res->flags & IORESOURCE_MEM_TYPE_MASK) {
+ case IORESOURCE_MEM_32BIT:
+ hd->regsize = 32;
+ break;
+ case IORESOURCE_MEM_16BIT:
+ hd->regsize = 16;
+ break;
+ case IORESOURCE_MEM_8BIT:
+ default:
+ hd->regsize = 8;
+ break;
+ }
+ }
setup_timer(&hd->timer, heartbeat_timer, (unsigned long)hd);
platform_set_drvdata(pdev, hd);
diff --git a/arch/sh/drivers/pci/Makefile b/arch/sh/drivers/pci/Makefile
index 08af1f4..4a59e68 100644
--- a/arch/sh/drivers/pci/Makefile
+++ b/arch/sh/drivers/pci/Makefile
@@ -1,14 +1,14 @@
#
# Makefile for the PCI specific kernel interface routines under Linux.
#
-obj-y += pci.o
+obj-y += common.o pci.o
obj-$(CONFIG_CPU_SUBTYPE_SH7751) += pci-sh7751.o ops-sh4.o
obj-$(CONFIG_CPU_SUBTYPE_SH7751R) += pci-sh7751.o ops-sh4.o
obj-$(CONFIG_CPU_SUBTYPE_SH7763) += pci-sh7780.o ops-sh4.o
obj-$(CONFIG_CPU_SUBTYPE_SH7780) += pci-sh7780.o ops-sh4.o
obj-$(CONFIG_CPU_SUBTYPE_SH7785) += pci-sh7780.o ops-sh4.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7786) += ops-sh7786.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7786) += pcie-sh7786.o ops-sh7786.o
obj-$(CONFIG_CPU_SH5) += pci-sh5.o ops-sh5.o
obj-$(CONFIG_SH_DREAMCAST) += ops-dreamcast.o fixups-dreamcast.o \
@@ -25,4 +25,3 @@
obj-$(CONFIG_SH_LANDISK) += fixups-landisk.o
obj-$(CONFIG_SH_LBOX_RE2) += fixups-rts7751r2d.o
obj-$(CONFIG_SH_CAYMAN) += fixups-cayman.o
-obj-$(CONFIG_SH_URQUELL) += pcie-sh7786.o
diff --git a/arch/sh/drivers/pci/common.c b/arch/sh/drivers/pci/common.c
new file mode 100644
index 0000000..dbf1381
--- /dev/null
+++ b/arch/sh/drivers/pci/common.c
@@ -0,0 +1,162 @@
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/timer.h>
+#include <linux/kernel.h>
+
+/*
+ * These functions are used early on before PCI scanning is done
+ * and all of the pci_dev and pci_bus structures have been created.
+ */
+static struct pci_dev *fake_pci_dev(struct pci_channel *hose,
+ int top_bus, int busnr, int devfn)
+{
+ static struct pci_dev dev;
+ static struct pci_bus bus;
+
+ dev.bus = &bus;
+ dev.sysdata = hose;
+ dev.devfn = devfn;
+ bus.number = busnr;
+ bus.sysdata = hose;
+ bus.ops = hose->pci_ops;
+
+ if(busnr != top_bus)
+ /* Fake a parent bus structure. */
+ bus.parent = &bus;
+ else
+ bus.parent = NULL;
+
+ return &dev;
+}
+
+#define EARLY_PCI_OP(rw, size, type) \
+int __init early_##rw##_config_##size(struct pci_channel *hose, \
+ int top_bus, int bus, int devfn, int offset, type value) \
+{ \
+ return pci_##rw##_config_##size( \
+ fake_pci_dev(hose, top_bus, bus, devfn), \
+ offset, value); \
+}
+
+EARLY_PCI_OP(read, byte, u8 *)
+EARLY_PCI_OP(read, word, u16 *)
+EARLY_PCI_OP(read, dword, u32 *)
+EARLY_PCI_OP(write, byte, u8)
+EARLY_PCI_OP(write, word, u16)
+EARLY_PCI_OP(write, dword, u32)
+
+int __init pci_is_66mhz_capable(struct pci_channel *hose,
+ int top_bus, int current_bus)
+{
+ u32 pci_devfn;
+ unsigned short vid;
+ int cap66 = -1;
+ u16 stat;
+
+ printk(KERN_INFO "PCI: Checking 66MHz capabilities...\n");
+
+ for (pci_devfn = 0; pci_devfn < 0xff; pci_devfn++) {
+ if (PCI_FUNC(pci_devfn))
+ continue;
+ if (early_read_config_word(hose, top_bus, current_bus,
+ pci_devfn, PCI_VENDOR_ID, &vid) !=
+ PCIBIOS_SUCCESSFUL)
+ continue;
+ if (vid == 0xffff)
+ continue;
+
+ /* check 66MHz capability */
+ if (cap66 < 0)
+ cap66 = 1;
+ if (cap66) {
+ early_read_config_word(hose, top_bus, current_bus,
+ pci_devfn, PCI_STATUS, &stat);
+ if (!(stat & PCI_STATUS_66MHZ)) {
+ printk(KERN_DEBUG
+ "PCI: %02x:%02x not 66MHz capable.\n",
+ current_bus, pci_devfn);
+ cap66 = 0;
+ break;
+ }
+ }
+ }
+
+ return cap66 > 0;
+}
+
+static void pcibios_enable_err(unsigned long __data)
+{
+ struct pci_channel *hose = (struct pci_channel *)__data;
+
+ del_timer(&hose->err_timer);
+ printk(KERN_DEBUG "PCI: re-enabling error IRQ.\n");
+ enable_irq(hose->err_irq);
+}
+
+static void pcibios_enable_serr(unsigned long __data)
+{
+ struct pci_channel *hose = (struct pci_channel *)__data;
+
+ del_timer(&hose->serr_timer);
+ printk(KERN_DEBUG "PCI: re-enabling system error IRQ.\n");
+ enable_irq(hose->serr_irq);
+}
+
+void pcibios_enable_timers(struct pci_channel *hose)
+{
+ if (hose->err_irq) {
+ init_timer(&hose->err_timer);
+ hose->err_timer.data = (unsigned long)hose;
+ hose->err_timer.function = pcibios_enable_err;
+ }
+
+ if (hose->serr_irq) {
+ init_timer(&hose->serr_timer);
+ hose->serr_timer.data = (unsigned long)hose;
+ hose->serr_timer.function = pcibios_enable_serr;
+ }
+}
+
+/*
+ * A simple handler for the regular PCI status errors, called from IRQ
+ * context.
+ */
+unsigned int pcibios_handle_status_errors(unsigned long addr,
+ unsigned int status,
+ struct pci_channel *hose)
+{
+ unsigned int cmd = 0;
+
+ if (status & PCI_STATUS_REC_MASTER_ABORT) {
+ printk(KERN_DEBUG "PCI: master abort, pc=0x%08lx\n", addr);
+ cmd |= PCI_STATUS_REC_MASTER_ABORT;
+ }
+
+ if (status & PCI_STATUS_REC_TARGET_ABORT) {
+ printk(KERN_DEBUG "PCI: target abort: ");
+ pcibios_report_status(PCI_STATUS_REC_TARGET_ABORT |
+ PCI_STATUS_SIG_TARGET_ABORT |
+ PCI_STATUS_REC_MASTER_ABORT, 1);
+ printk("\n");
+
+ cmd |= PCI_STATUS_REC_TARGET_ABORT;
+ }
+
+ if (status & (PCI_STATUS_PARITY | PCI_STATUS_DETECTED_PARITY)) {
+ printk(KERN_DEBUG "PCI: parity error detected: ");
+ pcibios_report_status(PCI_STATUS_PARITY |
+ PCI_STATUS_DETECTED_PARITY, 1);
+ printk("\n");
+
+ cmd |= PCI_STATUS_PARITY | PCI_STATUS_DETECTED_PARITY;
+
+ /* Now back off of the IRQ for awhile */
+ if (hose->err_irq) {
+ disable_irq_nosync(hose->err_irq);
+ hose->err_timer.expires = jiffies + HZ;
+ add_timer(&hose->err_timer);
+ }
+ }
+
+ return cmd;
+}
diff --git a/arch/sh/drivers/pci/fixups-dreamcast.c b/arch/sh/drivers/pci/fixups-dreamcast.c
index ed7f489..942ef4f 100644
--- a/arch/sh/drivers/pci/fixups-dreamcast.c
+++ b/arch/sh/drivers/pci/fixups-dreamcast.c
@@ -39,7 +39,7 @@
/*
* We also assume that dev->devfn == 0
*/
- dev->resource[1].start = p->io_resource->start + 0x100;
+ dev->resource[1].start = p->resources[0].start + 0x100;
dev->resource[1].end = dev->resource[1].start + 0x200 - 1;
/*
diff --git a/arch/sh/drivers/pci/fixups-r7780rp.c b/arch/sh/drivers/pci/fixups-r7780rp.c
index 15ca65c..08b2d86 100644
--- a/arch/sh/drivers/pci/fixups-r7780rp.c
+++ b/arch/sh/drivers/pci/fixups-r7780rp.c
@@ -22,15 +22,3 @@
{
return irq_tab[slot];
}
-
-int pci_fixup_pcic(struct pci_channel *chan)
-{
- pci_write_reg(chan, 0x000043ff, SH4_PCIINTM);
- pci_write_reg(chan, 0x00000000, SH7780_PCIIBAR);
- pci_write_reg(chan, 0x08000000, SH7780_PCICSCR0);
- pci_write_reg(chan, 0x0000001b, SH7780_PCICSAR0);
- pci_write_reg(chan, 0xfd000000, SH7780_PCICSCR1);
- pci_write_reg(chan, 0x0000000f, SH7780_PCICSAR1);
-
- return 0;
-}
diff --git a/arch/sh/drivers/pci/fixups-rts7751r2d.c b/arch/sh/drivers/pci/fixups-rts7751r2d.c
index 7898f14..e248516 100644
--- a/arch/sh/drivers/pci/fixups-rts7751r2d.c
+++ b/arch/sh/drivers/pci/fixups-rts7751r2d.c
@@ -43,7 +43,7 @@
{
unsigned long bcr1, mcr;
- bcr1 = ctrl_inl(SH7751_BCR1);
+ bcr1 = __raw_readl(SH7751_BCR1);
bcr1 |= 0x40080000; /* Enable Bit 19 BREQEN, set PCIC to slave */
pci_write_reg(chan, bcr1, SH4_PCIBCR1);
@@ -54,7 +54,7 @@
pci_write_reg(chan, 0xfb900047, SH7751_PCICONF1);
pci_write_reg(chan, 0xab000001, SH7751_PCICONF4);
- mcr = ctrl_inl(SH7751_MCR);
+ mcr = __raw_readl(SH7751_MCR);
mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF;
pci_write_reg(chan, mcr, SH4_PCIMCR);
diff --git a/arch/sh/drivers/pci/fixups-sdk7780.c b/arch/sh/drivers/pci/fixups-sdk7780.c
index 250b0ed..0930f98 100644
--- a/arch/sh/drivers/pci/fixups-sdk7780.c
+++ b/arch/sh/drivers/pci/fixups-sdk7780.c
@@ -31,22 +31,3 @@
{
return sdk7780_irq_tab[pin-1][slot];
}
-int pci_fixup_pcic(struct pci_channel *chan)
-{
- /* Enable all interrupts, so we know what to fix */
- pci_write_reg(chan, 0x0000C3FF, SH7780_PCIIMR);
-
- /* Set up standard PCI config registers */
- pci_write_reg(chan, 0x08000000, SH7780_PCIMBAR0); /* PCI */
- pci_write_reg(chan, 0x08000000, SH4_PCILAR0); /* SHwy */
- pci_write_reg(chan, 0x07F00001, SH4_PCILSR0); /* size 128M w/ MBAR */
-
- pci_write_reg(chan, 0x00000000, SH7780_PCIMBAR1);
- pci_write_reg(chan, 0x00000000, SH4_PCILAR1);
- pci_write_reg(chan, 0x00000000, SH4_PCILSR1);
-
- pci_write_reg(chan, 0xAB000801, SH7780_PCIIBAR);
- pci_write_reg(chan, 0xA5000C01, SH4_PCICR);
-
- return 0;
-}
diff --git a/arch/sh/drivers/pci/fixups-se7751.c b/arch/sh/drivers/pci/fixups-se7751.c
index 475fa9f..a4c7d3a 100644
--- a/arch/sh/drivers/pci/fixups-se7751.c
+++ b/arch/sh/drivers/pci/fixups-se7751.c
@@ -97,12 +97,12 @@
* meaning all calls go straight through... use BUG_ON to
* catch erroneous assumption.
*/
- BUG_ON(chan->mem_resource->start != SH7751_PCI_MEMORY_BASE);
+ BUG_ON(chan->resources[1].start != SH7751_PCI_MEMORY_BASE);
- PCIC_WRITE(SH7751_PCIMBR, chan->mem_resource->start);
+ PCIC_WRITE(SH7751_PCIMBR, chan->resources[1].start);
/* Set IOBR for window containing area specified in pci.h */
- PCIC_WRITE(SH7751_PCIIOBR, (chan->io_resource->start & SH7751_PCIIOBR_MASK));
+ PCIC_WRITE(SH7751_PCIIOBR, (chan->resources[0].start & SH7751_PCIIOBR_MASK));
/* All done, may as well say so... */
printk("SH7751 PCI: Finished initialization of the PCI controller\n");
diff --git a/arch/sh/drivers/pci/ops-sh4.c b/arch/sh/drivers/pci/ops-sh4.c
index 78bebeb..0b81999 100644
--- a/arch/sh/drivers/pci/ops-sh4.c
+++ b/arch/sh/drivers/pci/ops-sh4.c
@@ -16,7 +16,7 @@
* Direct access to PCI hardware...
*/
#define CONFIG_CMD(bus, devfn, where) \
- (P1SEG | (bus->number << 16) | (devfn << 8) | (where & ~3))
+ (0x80000000 | (bus->number << 16) | (devfn << 8) | (where & ~3))
static DEFINE_SPINLOCK(sh4_pci_lock);
@@ -102,34 +102,6 @@
.write = sh4_pci_write,
};
-/*
- * Not really related to pci_ops, but it's common and not worth shoving
- * somewhere else for now..
- */
-int __init sh4_pci_check_direct(struct pci_channel *chan)
-{
- /*
- * Check if configuration works.
- */
- unsigned int tmp = pci_read_reg(chan, SH4_PCIPAR);
-
- pci_write_reg(chan, P1SEG, SH4_PCIPAR);
-
- if (pci_read_reg(chan, SH4_PCIPAR) == P1SEG) {
- pci_write_reg(chan, tmp, SH4_PCIPAR);
- printk(KERN_INFO "PCI: Using configuration type 1\n");
- request_region(chan->reg_base + SH4_PCIPAR, 8,
- "PCI conf1");
- return 0;
- }
-
- pci_write_reg(chan, tmp, SH4_PCIPAR);
-
- printk(KERN_ERR "PCI: %s failed\n", __func__);
-
- return -EINVAL;
-}
-
int __attribute__((weak)) pci_fixup_pcic(struct pci_channel *chan)
{
/* Nothing to do. */
diff --git a/arch/sh/drivers/pci/pci-dreamcast.c b/arch/sh/drivers/pci/pci-dreamcast.c
index 210f9d4..6336941 100644
--- a/arch/sh/drivers/pci/pci-dreamcast.c
+++ b/arch/sh/drivers/pci/pci-dreamcast.c
@@ -25,25 +25,25 @@
#include <asm/irq.h>
#include <mach/pci.h>
-static struct resource gapspci_io_resource = {
- .name = "GAPSPCI IO",
- .start = GAPSPCI_BBA_CONFIG,
- .end = GAPSPCI_BBA_CONFIG + GAPSPCI_BBA_CONFIG_SIZE - 1,
- .flags = IORESOURCE_IO,
-};
-
-static struct resource gapspci_mem_resource = {
- .name = "GAPSPCI mem",
- .start = GAPSPCI_DMA_BASE,
- .end = GAPSPCI_DMA_BASE + GAPSPCI_DMA_SIZE - 1,
- .flags = IORESOURCE_MEM,
+static struct resource gapspci_resources[] = {
+ {
+ .name = "GAPSPCI IO",
+ .start = GAPSPCI_BBA_CONFIG,
+ .end = GAPSPCI_BBA_CONFIG + GAPSPCI_BBA_CONFIG_SIZE - 1,
+ .flags = IORESOURCE_IO,
+ }, {
+ .name = "GAPSPCI mem",
+ .start = GAPSPCI_DMA_BASE,
+ .end = GAPSPCI_DMA_BASE + GAPSPCI_DMA_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
};
static struct pci_channel dreamcast_pci_controller = {
.pci_ops = &gapspci_pci_ops,
- .io_resource = &gapspci_io_resource,
+ .resources = gapspci_resources,
+ .nr_resources = ARRAY_SIZE(gapspci_resources),
.io_offset = 0x00000000,
- .mem_resource = &gapspci_mem_resource,
.mem_offset = 0x00000000,
};
@@ -95,8 +95,6 @@
outl(0x00002001, GAPSPCI_BBA_CONFIG+0x10);
outl(0x01000000, GAPSPCI_BBA_CONFIG+0x14);
- register_pci_controller(&dreamcast_pci_controller);
-
- return 0;
+ return register_pci_controller(&dreamcast_pci_controller);
}
arch_initcall(gapspci_init);
diff --git a/arch/sh/drivers/pci/pci-sh4.h b/arch/sh/drivers/pci/pci-sh4.h
index 3d5296c..cbf763b 100644
--- a/arch/sh/drivers/pci/pci-sh4.h
+++ b/arch/sh/drivers/pci/pci-sh4.h
@@ -49,6 +49,17 @@
#define SH4_PCIINT_MWPD 0x00000002 /* Master Write PERR Detect */
#define SH4_PCIINT_MRPD 0x00000001 /* Master Read PERR Detect */
#define SH4_PCIINTM 0x118 /* PCI Interrupt Mask */
+ #define SH4_PCIINTM_TTADIM BIT(14) /* Target-target abort interrupt */
+ #define SH4_PCIINTM_TMTOIM BIT(9) /* Target retry timeout */
+ #define SH4_PCIINTM_MDEIM BIT(8) /* Master function disable error */
+ #define SH4_PCIINTM_APEDIM BIT(7) /* Address parity error detection */
+ #define SH4_PCIINTM_SDIM BIT(6) /* SERR detection */
+ #define SH4_PCIINTM_DPEITWM BIT(5) /* Data parity error for target write */
+ #define SH4_PCIINTM_PEDITRM BIT(4) /* PERR detection for target read */
+ #define SH4_PCIINTM_TADIMM BIT(3) /* Target abort for master */
+ #define SH4_PCIINTM_MADIMM BIT(2) /* Master abort for master */
+ #define SH4_PCIINTM_MWPDIM BIT(1) /* Master write data parity error */
+ #define SH4_PCIINTM_MRDPEIM BIT(0) /* Master read data parity error */
#define SH4_PCIALR 0x11C /* Error Address Register */
#define SH4_PCICLR 0x120 /* Error Command/Data */
#define SH4_PCICLR_MPIO 0x80000000
@@ -61,7 +72,7 @@
#define SH4_PCIAINT 0x130 /* Arbiter Interrupt Register */
#define SH4_PCIAINT_MBKN 0x00002000 /* Master Broken Interrupt */
#define SH4_PCIAINT_TBTO 0x00001000 /* Target Bus Time Out */
- #define SH4_PCIAINT_MBTO 0x00001000 /* Master Bus Time Out */
+ #define SH4_PCIAINT_MBTO 0x00000800 /* Master Bus Time Out */
#define SH4_PCIAINT_TABT 0x00000008 /* Target Abort */
#define SH4_PCIAINT_MABT 0x00000004 /* Master Abort */
#define SH4_PCIAINT_RDPE 0x00000002 /* Read Data Parity Error */
@@ -151,7 +162,6 @@
/* arch/sh/kernel/drivers/pci/ops-sh4.c */
extern struct pci_ops sh4_pci_ops;
-int sh4_pci_check_direct(struct pci_channel *chan);
int pci_fixup_pcic(struct pci_channel *chan);
struct sh4_pci_address_space {
@@ -167,13 +177,13 @@
static inline void pci_write_reg(struct pci_channel *chan,
unsigned long val, unsigned long reg)
{
- ctrl_outl(val, chan->reg_base + reg);
+ __raw_writel(val, chan->reg_base + reg);
}
static inline unsigned long pci_read_reg(struct pci_channel *chan,
unsigned long reg)
{
- return ctrl_inl(chan->reg_base + reg);
+ return __raw_readl(chan->reg_base + reg);
}
#endif /* __PCI_SH4_H */
diff --git a/arch/sh/drivers/pci/pci-sh5.c b/arch/sh/drivers/pci/pci-sh5.c
index 873ed2b..0bf296c 100644
--- a/arch/sh/drivers/pci/pci-sh5.c
+++ b/arch/sh/drivers/pci/pci-sh5.c
@@ -89,14 +89,13 @@
return IRQ_NONE;
}
-static struct resource sh5_io_resource = { /* place holder */ };
-static struct resource sh5_mem_resource = { /* place holder */ };
+static struct resource sh5_pci_resources[2];
static struct pci_channel sh5pci_controller = {
.pci_ops = &sh5_pci_ops,
- .mem_resource = &sh5_mem_resource,
+ .resources = sh5_pci_resources,
+ .nr_resources = ARRAY_SIZE(sh5_pci_resources),
.mem_offset = 0x00000000,
- .io_resource = &sh5_io_resource,
.io_offset = 0x00000000,
};
@@ -210,14 +209,12 @@
SH5PCI_WRITE(AINTM, ~0);
SH5PCI_WRITE(PINTM, ~0);
- sh5_io_resource.start = PCI_IO_AREA;
- sh5_io_resource.end = PCI_IO_AREA + 0x10000;
+ sh5_pci_resources[0].start = PCI_IO_AREA;
+ sh5_pci_resources[0].end = PCI_IO_AREA + 0x10000;
- sh5_mem_resource.start = memStart;
- sh5_mem_resource.end = memStart + memSize;
+ sh5_pci_resources[1].start = memStart;
+ sh5_pci_resources[1].end = memStart + memSize;
- register_pci_controller(&sh5pci_controller);
-
- return 0;
+ return register_pci_controller(&sh5pci_controller);
}
arch_initcall(sh5pci_init);
diff --git a/arch/sh/drivers/pci/pci-sh5.h b/arch/sh/drivers/pci/pci-sh5.h
index f277628..3f01dec 100644
--- a/arch/sh/drivers/pci/pci-sh5.h
+++ b/arch/sh/drivers/pci/pci-sh5.h
@@ -86,14 +86,14 @@
/* #define PCISH5_VCR_REG(x) ( SH5PCI_VCR_BASE (PCISH5_VCR_##x)) */
/* Write I/O functions */
-#define SH5PCI_WRITE(reg,val) ctrl_outl((u32)(val),PCISH5_ICR_REG(reg))
-#define SH5PCI_WRITE_SHORT(reg,val) ctrl_outw((u16)(val),PCISH5_ICR_REG(reg))
-#define SH5PCI_WRITE_BYTE(reg,val) ctrl_outb((u8)(val),PCISH5_ICR_REG(reg))
+#define SH5PCI_WRITE(reg,val) __raw_writel((u32)(val),PCISH5_ICR_REG(reg))
+#define SH5PCI_WRITE_SHORT(reg,val) __raw_writew((u16)(val),PCISH5_ICR_REG(reg))
+#define SH5PCI_WRITE_BYTE(reg,val) __raw_writeb((u8)(val),PCISH5_ICR_REG(reg))
/* Read I/O functions */
-#define SH5PCI_READ(reg) ctrl_inl(PCISH5_ICR_REG(reg))
-#define SH5PCI_READ_SHORT(reg) ctrl_inw(PCISH5_ICR_REG(reg))
-#define SH5PCI_READ_BYTE(reg) ctrl_inb(PCISH5_ICR_REG(reg))
+#define SH5PCI_READ(reg) __raw_readl(PCISH5_ICR_REG(reg))
+#define SH5PCI_READ_SHORT(reg) __raw_readw(PCISH5_ICR_REG(reg))
+#define SH5PCI_READ_BYTE(reg) __raw_readb(PCISH5_ICR_REG(reg))
/* Set PCI config bits */
#define SET_CONFIG_BITS(bus,devfn,where) ((((bus) << 16) | ((devfn) << 8) | ((where) & ~3)) | 0x80000000)
diff --git a/arch/sh/drivers/pci/pci-sh7751.c b/arch/sh/drivers/pci/pci-sh7751.c
index 70c1999..17811e5 100644
--- a/arch/sh/drivers/pci/pci-sh7751.c
+++ b/arch/sh/drivers/pci/pci-sh7751.c
@@ -44,25 +44,25 @@
return 1;
}
-static struct resource sh7751_io_resource = {
- .name = "SH7751_IO",
- .start = SH7751_PCI_IO_BASE,
- .end = SH7751_PCI_IO_BASE + SH7751_PCI_IO_SIZE - 1,
- .flags = IORESOURCE_IO
-};
-
-static struct resource sh7751_mem_resource = {
- .name = "SH7751_mem",
- .start = SH7751_PCI_MEMORY_BASE,
- .end = SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1,
- .flags = IORESOURCE_MEM
+static struct resource sh7751_pci_resources[] = {
+ {
+ .name = "SH7751_IO",
+ .start = SH7751_PCI_IO_BASE,
+ .end = SH7751_PCI_IO_BASE + SH7751_PCI_IO_SIZE - 1,
+ .flags = IORESOURCE_IO
+ }, {
+ .name = "SH7751_mem",
+ .start = SH7751_PCI_MEMORY_BASE,
+ .end = SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1,
+ .flags = IORESOURCE_MEM
+ },
};
static struct pci_channel sh7751_pci_controller = {
.pci_ops = &sh4_pci_ops,
- .mem_resource = &sh7751_mem_resource,
+ .resources = sh7751_pci_resources,
+ .nr_resources = ARRAY_SIZE(sh7751_pci_resources),
.mem_offset = 0x00000000,
- .io_resource = &sh7751_io_resource,
.io_offset = 0x00000000,
.io_map_base = SH7751_PCI_IO_BASE,
};
@@ -79,7 +79,6 @@
struct pci_channel *chan = &sh7751_pci_controller;
unsigned int id;
u32 word, reg;
- int ret;
printk(KERN_NOTICE "PCI: Starting intialization.\n");
@@ -93,13 +92,10 @@
return -ENODEV;
}
- if ((ret = sh4_pci_check_direct(chan)) != 0)
- return ret;
-
/* Set the BCR's to enable PCI access */
- reg = ctrl_inl(SH7751_BCR1);
+ reg = __raw_readl(SH7751_BCR1);
reg |= 0x80000;
- ctrl_outl(reg, SH7751_BCR1);
+ __raw_writel(reg, SH7751_BCR1);
/* Turn the clocks back on (not done in reset)*/
pci_write_reg(chan, 0, SH4_PCICLKR);
@@ -132,13 +128,13 @@
/* Set the local 16MB PCI memory space window to
* the lowest PCI mapped address
*/
- word = chan->mem_resource->start & SH4_PCIMBR_MASK;
+ word = chan->resources[1].start & SH4_PCIMBR_MASK;
pr_debug("PCI: Setting upper bits of Memory window to 0x%x\n", word);
pci_write_reg(chan, word , SH4_PCIMBR);
/* Make sure the MSB's of IO window are set to access PCI space
* correctly */
- word = chan->io_resource->start & SH4_PCIIOBR_MASK;
+ word = chan->resources[0].start & SH4_PCIIOBR_MASK;
pr_debug("PCI: Setting upper bits of IO window to 0x%x\n", word);
pci_write_reg(chan, word, SH4_PCIIOBR);
@@ -159,13 +155,13 @@
return -1;
/* configure the wait control registers */
- word = ctrl_inl(SH7751_WCR1);
+ word = __raw_readl(SH7751_WCR1);
pci_write_reg(chan, word, SH4_PCIWCR1);
- word = ctrl_inl(SH7751_WCR2);
+ word = __raw_readl(SH7751_WCR2);
pci_write_reg(chan, word, SH4_PCIWCR2);
- word = ctrl_inl(SH7751_WCR3);
+ word = __raw_readl(SH7751_WCR3);
pci_write_reg(chan, word, SH4_PCIWCR3);
- word = ctrl_inl(SH7751_MCR);
+ word = __raw_readl(SH7751_MCR);
pci_write_reg(chan, word, SH4_PCIMCR);
/* NOTE: I'm ignoring the PCI error IRQs for now..
@@ -180,8 +176,6 @@
word = SH4_PCICR_PREFIX | SH4_PCICR_CFIN | SH4_PCICR_ARBM;
pci_write_reg(chan, word, SH4_PCICR);
- register_pci_controller(chan);
-
- return 0;
+ return register_pci_controller(chan);
}
arch_initcall(sh7751_pci_init);
diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c
index 323b92d..ffdcbf1 100644
--- a/arch/sh/drivers/pci/pci-sh7780.c
+++ b/arch/sh/drivers/pci/pci-sh7780.c
@@ -1,7 +1,7 @@
/*
* Low-Level PCI Support for the SH7780
*
- * Copyright (C) 2005 - 2009 Paul Mundt
+ * Copyright (C) 2005 - 2010 Paul Mundt
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
@@ -11,52 +11,240 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/timer.h>
+#include <linux/irq.h>
#include <linux/errno.h>
#include <linux/delay.h>
+#include <linux/log2.h>
#include "pci-sh4.h"
+#include <asm/mmu.h>
+#include <asm/sizes.h>
-static struct resource sh7785_io_resource = {
- .name = "SH7785_IO",
- .start = SH7780_PCI_IO_BASE,
- .end = SH7780_PCI_IO_BASE + SH7780_PCI_IO_SIZE - 1,
- .flags = IORESOURCE_IO
-};
-
-static struct resource sh7785_mem_resource = {
- .name = "SH7785_mem",
- .start = SH7780_PCI_MEMORY_BASE,
- .end = SH7780_PCI_MEMORY_BASE + SH7780_PCI_MEM_SIZE - 1,
- .flags = IORESOURCE_MEM
+static struct resource sh7785_pci_resources[] = {
+ {
+ .name = "PCI IO",
+ .start = 0x1000,
+ .end = SZ_4M - 1,
+ .flags = IORESOURCE_IO,
+ }, {
+ .name = "PCI MEM 0",
+ .start = 0xfd000000,
+ .end = 0xfd000000 + SZ_16M - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .name = "PCI MEM 1",
+ .start = 0x10000000,
+ .end = 0x10000000 + SZ_64M - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ /*
+ * 32-bit only resources must be last.
+ */
+ .name = "PCI MEM 2",
+ .start = 0xc0000000,
+ .end = 0xc0000000 + SZ_512M - 1,
+ .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
+ },
};
static struct pci_channel sh7780_pci_controller = {
.pci_ops = &sh4_pci_ops,
- .mem_resource = &sh7785_mem_resource,
- .mem_offset = 0x00000000,
- .io_resource = &sh7785_io_resource,
- .io_offset = 0x00000000,
- .io_map_base = SH7780_PCI_IO_BASE,
+ .resources = sh7785_pci_resources,
+ .nr_resources = ARRAY_SIZE(sh7785_pci_resources),
+ .io_offset = 0,
+ .mem_offset = 0,
+ .io_map_base = 0xfe200000,
+ .serr_irq = evt2irq(0xa00),
+ .err_irq = evt2irq(0xaa0),
};
-static struct sh4_pci_address_map sh7780_pci_map = {
- .window0 = {
-#if defined(CONFIG_32BIT)
- .base = SH7780_32BIT_DDR_BASE_ADDR,
- .size = 0x40000000,
-#else
- .base = SH7780_CS0_BASE_ADDR,
- .size = 0x20000000,
-#endif
- },
+struct pci_errors {
+ unsigned int mask;
+ const char *str;
+} pci_arbiter_errors[] = {
+ { SH4_PCIAINT_MBKN, "master broken" },
+ { SH4_PCIAINT_TBTO, "target bus time out" },
+ { SH4_PCIAINT_MBTO, "master bus time out" },
+ { SH4_PCIAINT_TABT, "target abort" },
+ { SH4_PCIAINT_MABT, "master abort" },
+ { SH4_PCIAINT_RDPE, "read data parity error" },
+ { SH4_PCIAINT_WDPE, "write data parity error" },
+}, pci_interrupt_errors[] = {
+ { SH4_PCIINT_MLCK, "master lock error" },
+ { SH4_PCIINT_TABT, "target-target abort" },
+ { SH4_PCIINT_TRET, "target retry time out" },
+ { SH4_PCIINT_MFDE, "master function disable erorr" },
+ { SH4_PCIINT_PRTY, "address parity error" },
+ { SH4_PCIINT_SERR, "SERR" },
+ { SH4_PCIINT_TWDP, "data parity error for target write" },
+ { SH4_PCIINT_TRDP, "PERR detected for target read" },
+ { SH4_PCIINT_MTABT, "target abort for master" },
+ { SH4_PCIINT_MMABT, "master abort for master" },
+ { SH4_PCIINT_MWPD, "master write data parity error" },
+ { SH4_PCIINT_MRPD, "master read data parity error" },
};
+static irqreturn_t sh7780_pci_err_irq(int irq, void *dev_id)
+{
+ struct pci_channel *hose = dev_id;
+ unsigned long addr;
+ unsigned int status;
+ unsigned int cmd;
+ int i;
+
+ addr = __raw_readl(hose->reg_base + SH4_PCIALR);
+
+ /*
+ * Handle status errors.
+ */
+ status = __raw_readw(hose->reg_base + PCI_STATUS);
+ if (status & (PCI_STATUS_PARITY |
+ PCI_STATUS_DETECTED_PARITY |
+ PCI_STATUS_SIG_TARGET_ABORT |
+ PCI_STATUS_REC_TARGET_ABORT |
+ PCI_STATUS_REC_MASTER_ABORT)) {
+ cmd = pcibios_handle_status_errors(addr, status, hose);
+ if (likely(cmd))
+ __raw_writew(cmd, hose->reg_base + PCI_STATUS);
+ }
+
+ /*
+ * Handle arbiter errors.
+ */
+ status = __raw_readl(hose->reg_base + SH4_PCIAINT);
+ for (i = cmd = 0; i < ARRAY_SIZE(pci_arbiter_errors); i++) {
+ if (status & pci_arbiter_errors[i].mask) {
+ printk(KERN_DEBUG "PCI: %s, addr=%08lx\n",
+ pci_arbiter_errors[i].str, addr);
+ cmd |= pci_arbiter_errors[i].mask;
+ }
+ }
+ __raw_writel(cmd, hose->reg_base + SH4_PCIAINT);
+
+ /*
+ * Handle the remaining PCI errors.
+ */
+ status = __raw_readl(hose->reg_base + SH4_PCIINT);
+ for (i = cmd = 0; i < ARRAY_SIZE(pci_interrupt_errors); i++) {
+ if (status & pci_interrupt_errors[i].mask) {
+ printk(KERN_DEBUG "PCI: %s, addr=%08lx\n",
+ pci_interrupt_errors[i].str, addr);
+ cmd |= pci_interrupt_errors[i].mask;
+ }
+ }
+ __raw_writel(cmd, hose->reg_base + SH4_PCIINT);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t sh7780_pci_serr_irq(int irq, void *dev_id)
+{
+ struct pci_channel *hose = dev_id;
+
+ printk(KERN_DEBUG "PCI: system error received: ");
+ pcibios_report_status(PCI_STATUS_SIG_SYSTEM_ERROR, 1);
+ printk("\n");
+
+ /* Deassert SERR */
+ __raw_writel(SH4_PCIINTM_SDIM, hose->reg_base + SH4_PCIINTM);
+
+ /* Back off the IRQ for awhile */
+ disable_irq_nosync(irq);
+ hose->serr_timer.expires = jiffies + HZ;
+ add_timer(&hose->serr_timer);
+
+ return IRQ_HANDLED;
+}
+
+static int __init sh7780_pci_setup_irqs(struct pci_channel *hose)
+{
+ int ret;
+
+ /* Clear out PCI arbiter IRQs */
+ __raw_writel(0, hose->reg_base + SH4_PCIAINT);
+
+ /* Clear all error conditions */
+ __raw_writew(PCI_STATUS_DETECTED_PARITY | \
+ PCI_STATUS_SIG_SYSTEM_ERROR | \
+ PCI_STATUS_REC_MASTER_ABORT | \
+ PCI_STATUS_REC_TARGET_ABORT | \
+ PCI_STATUS_SIG_TARGET_ABORT | \
+ PCI_STATUS_PARITY, hose->reg_base + PCI_STATUS);
+
+ ret = request_irq(hose->serr_irq, sh7780_pci_serr_irq, IRQF_DISABLED,
+ "PCI SERR interrupt", hose);
+ if (unlikely(ret)) {
+ printk(KERN_ERR "PCI: Failed hooking SERR IRQ\n");
+ return ret;
+ }
+
+ /*
+ * The PCI ERR IRQ needs to be IRQF_SHARED since all of the power
+ * down IRQ vectors are routed through the ERR IRQ vector. We
+ * only request_irq() once as there is only a single masking
+ * source for multiple events.
+ */
+ ret = request_irq(hose->err_irq, sh7780_pci_err_irq, IRQF_SHARED,
+ "PCI ERR interrupt", hose);
+ if (unlikely(ret)) {
+ free_irq(hose->serr_irq, hose);
+ return ret;
+ }
+
+ /* Unmask all of the arbiter IRQs. */
+ __raw_writel(SH4_PCIAINT_MBKN | SH4_PCIAINT_TBTO | SH4_PCIAINT_MBTO | \
+ SH4_PCIAINT_TABT | SH4_PCIAINT_MABT | SH4_PCIAINT_RDPE | \
+ SH4_PCIAINT_WDPE, hose->reg_base + SH4_PCIAINTM);
+
+ /* Unmask all of the PCI IRQs */
+ __raw_writel(SH4_PCIINTM_TTADIM | SH4_PCIINTM_TMTOIM | \
+ SH4_PCIINTM_MDEIM | SH4_PCIINTM_APEDIM | \
+ SH4_PCIINTM_SDIM | SH4_PCIINTM_DPEITWM | \
+ SH4_PCIINTM_PEDITRM | SH4_PCIINTM_TADIMM | \
+ SH4_PCIINTM_MADIMM | SH4_PCIINTM_MWPDIM | \
+ SH4_PCIINTM_MRDPEIM, hose->reg_base + SH4_PCIINTM);
+
+ return ret;
+}
+
+static inline void __init sh7780_pci_teardown_irqs(struct pci_channel *hose)
+{
+ free_irq(hose->err_irq, hose);
+ free_irq(hose->serr_irq, hose);
+}
+
+static void __init sh7780_pci66_init(struct pci_channel *hose)
+{
+ unsigned int tmp;
+
+ if (!pci_is_66mhz_capable(hose, 0, 0))
+ return;
+
+ /* Enable register access */
+ tmp = __raw_readl(hose->reg_base + SH4_PCICR);
+ tmp |= SH4_PCICR_PREFIX;
+ __raw_writel(tmp, hose->reg_base + SH4_PCICR);
+
+ /* Enable 66MHz operation */
+ tmp = __raw_readw(hose->reg_base + PCI_STATUS);
+ tmp |= PCI_STATUS_66MHZ;
+ __raw_writew(tmp, hose->reg_base + PCI_STATUS);
+
+ /* Done */
+ tmp = __raw_readl(hose->reg_base + SH4_PCICR);
+ tmp |= SH4_PCICR_PREFIX | SH4_PCICR_CFIN;
+ __raw_writel(tmp, hose->reg_base + SH4_PCICR);
+}
+
static int __init sh7780_pci_init(void)
{
struct pci_channel *chan = &sh7780_pci_controller;
+ phys_addr_t memphys;
+ size_t memsize;
unsigned int id;
- const char *type = NULL;
- int ret;
- u32 word;
+ const char *type;
+ int ret, i;
printk(KERN_NOTICE "PCI: Starting intialization.\n");
@@ -65,17 +253,28 @@
/* Enable CPU access to the PCIC registers. */
__raw_writel(PCIECR_ENBL, PCIECR);
- id = __raw_readw(chan->reg_base + SH7780_PCIVID);
- if (id != SH7780_VENDOR_ID) {
+ /* Reset */
+ __raw_writel(SH4_PCICR_PREFIX | SH4_PCICR_PRST,
+ chan->reg_base + SH4_PCICR);
+
+ /*
+ * Wait for it to come back up. The spec says to allow for up to
+ * 1 second after toggling the reset pin, but in practice 100ms
+ * is more than enough.
+ */
+ mdelay(100);
+
+ id = __raw_readw(chan->reg_base + PCI_VENDOR_ID);
+ if (id != PCI_VENDOR_ID_RENESAS) {
printk(KERN_ERR "PCI: Unknown vendor ID 0x%04x.\n", id);
return -ENODEV;
}
- id = __raw_readw(chan->reg_base + SH7780_PCIDID);
- type = (id == SH7763_DEVICE_ID) ? "SH7763" :
- (id == SH7780_DEVICE_ID) ? "SH7780" :
- (id == SH7781_DEVICE_ID) ? "SH7781" :
- (id == SH7785_DEVICE_ID) ? "SH7785" :
+ id = __raw_readw(chan->reg_base + PCI_DEVICE_ID);
+ type = (id == PCI_DEVICE_ID_RENESAS_SH7763) ? "SH7763" :
+ (id == PCI_DEVICE_ID_RENESAS_SH7780) ? "SH7780" :
+ (id == PCI_DEVICE_ID_RENESAS_SH7781) ? "SH7781" :
+ (id == PCI_DEVICE_ID_RENESAS_SH7785) ? "SH7785" :
NULL;
if (unlikely(!type)) {
printk(KERN_ERR "PCI: Found an unsupported Renesas host "
@@ -85,62 +284,119 @@
printk(KERN_NOTICE "PCI: Found a Renesas %s host "
"controller, revision %d.\n", type,
- __raw_readb(chan->reg_base + SH7780_PCIRID));
+ __raw_readb(chan->reg_base + PCI_REVISION_ID));
- if ((ret = sh4_pci_check_direct(chan)) != 0)
+ /*
+ * Now throw it in to register initialization mode and
+ * start the real work.
+ */
+ __raw_writel(SH4_PCICR_PREFIX, chan->reg_base + SH4_PCICR);
+
+ memphys = __pa(memory_start);
+ memsize = roundup_pow_of_two(memory_end - memory_start);
+
+ /*
+ * If there's more than 512MB of memory, we need to roll over to
+ * LAR1/LSR1.
+ */
+ if (memsize > SZ_512M) {
+ __raw_writel(memphys + SZ_512M, chan->reg_base + SH4_PCILAR1);
+ __raw_writel((((memsize - SZ_512M) - SZ_1M) & 0x1ff00000) | 1,
+ chan->reg_base + SH4_PCILSR1);
+ memsize = SZ_512M;
+ } else {
+ /*
+ * Otherwise just zero it out and disable it.
+ */
+ __raw_writel(0, chan->reg_base + SH4_PCILAR1);
+ __raw_writel(0, chan->reg_base + SH4_PCILSR1);
+ }
+
+ /*
+ * LAR0/LSR0 covers up to the first 512MB, which is enough to
+ * cover all of lowmem on most platforms.
+ */
+ __raw_writel(memphys, chan->reg_base + SH4_PCILAR0);
+ __raw_writel(((memsize - SZ_1M) & 0x1ff00000) | 1,
+ chan->reg_base + SH4_PCILSR0);
+
+ /*
+ * Hook up the ERR and SERR IRQs.
+ */
+ ret = sh7780_pci_setup_irqs(chan);
+ if (unlikely(ret))
return ret;
/*
- * Set the class and sub-class codes.
+ * Disable the cache snoop controller for non-coherent DMA.
*/
- __raw_writeb(PCI_CLASS_BRIDGE_HOST >> 8,
- chan->reg_base + SH7780_PCIBCC);
- __raw_writeb(PCI_CLASS_BRIDGE_HOST & 0xff,
- chan->reg_base + SH7780_PCISUB);
+ __raw_writel(0, chan->reg_base + SH7780_PCICSCR0);
+ __raw_writel(0, chan->reg_base + SH7780_PCICSAR0);
+ __raw_writel(0, chan->reg_base + SH7780_PCICSCR1);
+ __raw_writel(0, chan->reg_base + SH7780_PCICSAR1);
/*
- * Set IO and Mem windows to local address
- * Make PCI and local address the same for easy 1 to 1 mapping
+ * Setup the memory BARs
*/
- pci_write_reg(chan, sh7780_pci_map.window0.size - 0xfffff, SH4_PCILSR0);
- /* Set the values on window 0 PCI config registers */
- pci_write_reg(chan, sh7780_pci_map.window0.base, SH4_PCILAR0);
- pci_write_reg(chan, sh7780_pci_map.window0.base, SH7780_PCIMBAR0);
+ for (i = 1; i < chan->nr_resources; i++) {
+ struct resource *res = chan->resources + i;
+ resource_size_t size;
- pci_write_reg(chan, 0x0000380f, SH4_PCIAINTM);
+ if (unlikely(res->flags & IORESOURCE_IO))
+ continue;
- /* Set up standard PCI config registers */
- __raw_writew(0xFB00, chan->reg_base + SH7780_PCISTATUS);
- __raw_writew(0x0047, chan->reg_base + SH7780_PCICMD);
- __raw_writew(0x1912, chan->reg_base + SH7780_PCISVID);
- __raw_writew(0x0001, chan->reg_base + SH7780_PCISID);
+ /*
+ * Make sure we're in the right physical addressing mode
+ * for dealing with the resource.
+ */
+ if ((res->flags & IORESOURCE_MEM_32BIT) && __in_29bit_mode()) {
+ chan->nr_resources--;
+ continue;
+ }
- __raw_writeb(0x00, chan->reg_base + SH7780_PCIPIF);
+ size = resource_size(res);
- /* Apply any last-minute PCIC fixups */
- pci_fixup_pcic(chan);
+ /*
+ * The MBMR mask is calculated in units of 256kB, which
+ * keeps things pretty simple.
+ */
+ __raw_writel(((roundup_pow_of_two(size) / SZ_256K) - 1) << 18,
+ chan->reg_base + SH7780_PCIMBMR(i - 1));
+ __raw_writel(res->start, chan->reg_base + SH7780_PCIMBR(i - 1));
+ }
- pci_write_reg(chan, 0xfd000000, SH7780_PCIMBR0);
- pci_write_reg(chan, 0x00fc0000, SH7780_PCIMBMR0);
+ /*
+ * And I/O.
+ */
+ __raw_writel(0, chan->reg_base + PCI_BASE_ADDRESS_0);
+ __raw_writel(0, chan->reg_base + SH7780_PCIIOBR);
+ __raw_writel(0, chan->reg_base + SH7780_PCIIOBMR);
-#ifdef CONFIG_32BIT
- pci_write_reg(chan, 0xc0000000, SH7780_PCIMBR2);
- pci_write_reg(chan, 0x20000000 - SH7780_PCI_IO_SIZE, SH7780_PCIMBMR2);
-#endif
+ __raw_writew(PCI_COMMAND_SERR | PCI_COMMAND_WAIT | \
+ PCI_COMMAND_PARITY | PCI_COMMAND_MASTER | \
+ PCI_COMMAND_MEMORY, chan->reg_base + PCI_COMMAND);
- /* Set IOBR for windows containing area specified in pci.h */
- pci_write_reg(chan, chan->io_resource->start & ~(SH7780_PCI_IO_SIZE-1),
- SH7780_PCIIOBR);
- pci_write_reg(chan, ((SH7780_PCI_IO_SIZE-1) & (7<<18)),
- SH7780_PCIIOBMR);
+ /*
+ * Initialization mode complete, release the control register and
+ * enable round robin mode to stop device overruns/starvation.
+ */
+ __raw_writel(SH4_PCICR_PREFIX | SH4_PCICR_CFIN | SH4_PCICR_FTO,
+ chan->reg_base + SH4_PCICR);
- /* SH7780 init done, set central function init complete */
- /* use round robin mode to stop a device starving/overruning */
- word = SH4_PCICR_PREFIX | SH4_PCICR_CFIN | SH4_PCICR_FTO;
- pci_write_reg(chan, word, SH4_PCICR);
+ ret = register_pci_controller(chan);
+ if (unlikely(ret))
+ goto err;
- register_pci_controller(chan);
+ sh7780_pci66_init(chan);
+
+ printk(KERN_NOTICE "PCI: Running at %dMHz.\n",
+ (__raw_readw(chan->reg_base + PCI_STATUS) & PCI_STATUS_66MHZ) ?
+ 66 : 33);
return 0;
+
+err:
+ sh7780_pci_teardown_irqs(chan);
+ return ret;
}
arch_initcall(sh7780_pci_init);
diff --git a/arch/sh/drivers/pci/pci-sh7780.h b/arch/sh/drivers/pci/pci-sh7780.h
index 4a52478..205dcbe 100644
--- a/arch/sh/drivers/pci/pci-sh7780.h
+++ b/arch/sh/drivers/pci/pci-sh7780.h
@@ -12,12 +12,11 @@
#ifndef _PCI_SH7780_H_
#define _PCI_SH7780_H_
-/* Platform Specific Values */
-#define SH7780_VENDOR_ID 0x1912
-#define SH7781_DEVICE_ID 0x0001
-#define SH7780_DEVICE_ID 0x0002
-#define SH7763_DEVICE_ID 0x0004
-#define SH7785_DEVICE_ID 0x0007
+#define PCI_VENDOR_ID_RENESAS 0x1912
+#define PCI_DEVICE_ID_RENESAS_SH7781 0x0001
+#define PCI_DEVICE_ID_RENESAS_SH7780 0x0002
+#define PCI_DEVICE_ID_RENESAS_SH7763 0x0004
+#define PCI_DEVICE_ID_RENESAS_SH7785 0x0007
/* SH7780 Control Registers */
#define PCIECR 0xFE000008
@@ -27,44 +26,9 @@
#define SH7780_PCI_CONFIG_BASE 0xFD000000 /* Config space base addr */
#define SH7780_PCI_CONFIG_SIZE 0x01000000 /* Config space size */
-#define SH7780_PCI_MEMORY_BASE 0xFD000000 /* Memory space base addr */
-#define SH7780_PCI_MEM_SIZE 0x01000000 /* Size of Memory window */
-
-#define SH7780_PCI_IO_BASE 0xFE200000 /* IO space base address */
-#define SH7780_PCI_IO_SIZE 0x00400000 /* Size of IO window */
-
#define SH7780_PCIREG_BASE 0xFE040000 /* PCI regs base address */
/* SH7780 PCI Config Registers */
-#define SH7780_PCIVID 0x000 /* Vendor ID */
-#define SH7780_PCIDID 0x002 /* Device ID */
-#define SH7780_PCICMD 0x004 /* Command */
-#define SH7780_PCISTATUS 0x006 /* Status */
-#define SH7780_PCIRID 0x008 /* Revision ID */
-#define SH7780_PCIPIF 0x009 /* Program Interface */
-#define SH7780_PCISUB 0x00a /* Sub class code */
-#define SH7780_PCIBCC 0x00b /* Base class code */
-#define SH7780_PCICLS 0x00c /* Cache line size */
-#define SH7780_PCILTM 0x00d /* latency timer */
-#define SH7780_PCIHDR 0x00e /* Header type */
-#define SH7780_PCIBIST 0x00f /* BIST */
-#define SH7780_PCIIBAR 0x010 /* IO Base address */
-#define SH7780_PCIMBAR0 0x014 /* Memory base address0 */
-#define SH7780_PCIMBAR1 0x018 /* Memory base address1 */
-#define SH7780_PCISVID 0x02c /* Sub system vendor ID */
-#define SH7780_PCISID 0x02e /* Sub system ID */
-#define SH7780_PCICP 0x034
-#define SH7780_PCIINTLINE 0x03c /* Interrupt line */
-#define SH7780_PCIINTPIN 0x03d /* Interrupt pin */
-#define SH7780_PCIMINGNT 0x03e /* Minumum grand */
-#define SH7780_PCIMAXLAT 0x03f /* Maxmum latency */
-#define SH7780_PCICID 0x040
-#define SH7780_PCINIP 0x041
-#define SH7780_PCIPMC 0x042
-#define SH7780_PCIPMCSR 0x044
-#define SH7780_PCIPMCSR_BSE 0x046
-#define SH7780_PCICDD 0x047
-
#define SH7780_PCIIR 0x114 /* PCI Interrupt Register */
#define SH7780_PCIIMR 0x118 /* PCI Interrupt Mask Register */
#define SH7780_PCIAIR 0x11C /* Error Address Register */
@@ -76,10 +40,8 @@
#define SH7780_PCIPINT 0x1CC /* Power Mgmnt Int. Register */
#define SH7780_PCIPINTM 0x1D0 /* Power Mgmnt Mask Register */
-#define SH7780_PCIMBR0 0x1E0
-#define SH7780_PCIMBMR0 0x1E4
-#define SH7780_PCIMBR2 0x1F0
-#define SH7780_PCIMBMR2 0x1F4
+#define SH7780_PCIMBR(x) (0x1E0 + ((x) * 8))
+#define SH7780_PCIMBMR(x) (0x1E4 + ((x) * 8))
#define SH7780_PCIIOBR 0x1F8
#define SH7780_PCIIOBMR 0x1FC
#define SH7780_PCICSCR0 0x210 /* Cache Snoop1 Cnt. Register */
@@ -87,16 +49,4 @@
#define SH7780_PCICSAR0 0x218 /* Cache Snoop1 Addr. Register */
#define SH7780_PCICSAR1 0x21C /* Cache Snoop2 Addr. Register */
-/* General Memory Config Addresses */
-#define SH7780_CS0_BASE_ADDR 0x0
-#define SH7780_MEM_REGION_SIZE 0x04000000
-#define SH7780_CS1_BASE_ADDR (SH7780_CS0_BASE_ADDR + SH7780_MEM_REGION_SIZE)
-#define SH7780_CS2_BASE_ADDR (SH7780_CS1_BASE_ADDR + SH7780_MEM_REGION_SIZE)
-#define SH7780_CS3_BASE_ADDR (SH7780_CS2_BASE_ADDR + SH7780_MEM_REGION_SIZE)
-#define SH7780_CS4_BASE_ADDR (SH7780_CS3_BASE_ADDR + SH7780_MEM_REGION_SIZE)
-#define SH7780_CS5_BASE_ADDR (SH7780_CS4_BASE_ADDR + SH7780_MEM_REGION_SIZE)
-#define SH7780_CS6_BASE_ADDR (SH7780_CS5_BASE_ADDR + SH7780_MEM_REGION_SIZE)
-
-#define SH7780_32BIT_DDR_BASE_ADDR 0x40000000
-
#endif /* _PCI_SH7780_H_ */
diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c
index c481df6..953af13 100644
--- a/arch/sh/drivers/pci/pci.c
+++ b/arch/sh/drivers/pci/pci.c
@@ -33,15 +33,22 @@
static void __devinit pcibios_scanbus(struct pci_channel *hose)
{
static int next_busno;
+ static int need_domain_info;
struct pci_bus *bus;
bus = pci_scan_bus(next_busno, hose->pci_ops, hose);
+ hose->bus = bus;
+
+ need_domain_info = need_domain_info || hose->index;
+ hose->need_domain_info = need_domain_info;
if (bus) {
next_busno = bus->subordinate + 1;
/* Don't allow 8-bit bus number overflow inside the hose -
reserve some space for bridges. */
- if (next_busno > 224)
+ if (next_busno > 224) {
next_busno = 0;
+ need_domain_info = 1;
+ }
pci_bus_size_bridges(bus);
pci_bus_assign_resources(bus);
@@ -51,10 +58,21 @@
static DEFINE_MUTEX(pci_scan_mutex);
-void __devinit register_pci_controller(struct pci_channel *hose)
+int __devinit register_pci_controller(struct pci_channel *hose)
{
- request_resource(&iomem_resource, hose->mem_resource);
- request_resource(&ioport_resource, hose->io_resource);
+ int i;
+
+ for (i = 0; i < hose->nr_resources; i++) {
+ struct resource *res = hose->resources + i;
+
+ if (res->flags & IORESOURCE_IO) {
+ if (request_resource(&ioport_resource, res) < 0)
+ goto out;
+ } else {
+ if (request_resource(&iomem_resource, res) < 0)
+ goto out;
+ }
+ }
*hose_tail = hose;
hose_tail = &hose->next;
@@ -68,6 +86,11 @@
}
/*
+ * Setup the ERR/PERR and SERR timers, if available.
+ */
+ pcibios_enable_timers(hose);
+
+ /*
* Scan the bus if it is register after the PCI subsystem
* initialization.
*/
@@ -76,6 +99,15 @@
pcibios_scanbus(hose);
mutex_unlock(&pci_scan_mutex);
}
+
+ return 0;
+
+out:
+ for (--i; i >= 0; i--)
+ release_resource(&hose->resources[i]);
+
+ printk(KERN_WARNING "Skipping PCI bus scan due to resource conflict\n");
+ return -1;
}
static int __init pcibios_init(void)
@@ -127,11 +159,13 @@
{
struct pci_dev *dev = bus->self;
struct list_head *ln;
- struct pci_channel *chan = bus->sysdata;
+ struct pci_channel *hose = bus->sysdata;
if (!dev) {
- bus->resource[0] = chan->io_resource;
- bus->resource[1] = chan->mem_resource;
+ int i;
+
+ for (i = 0; i < hose->nr_resources; i++)
+ bus->resource[i] = hose->resources + i;
}
for (ln = bus->devices.next; ln != &bus->devices; ln = ln->next) {
@@ -148,34 +182,29 @@
* addresses to be allocated in the 0x000-0x0ff region
* modulo 0x400.
*/
-void pcibios_align_resource(void *data, struct resource *res,
- resource_size_t size, resource_size_t align)
+resource_size_t pcibios_align_resource(void *data, const struct resource *res,
+ resource_size_t size, resource_size_t align)
{
struct pci_dev *dev = data;
- struct pci_channel *chan = dev->sysdata;
+ struct pci_channel *hose = dev->sysdata;
resource_size_t start = res->start;
if (res->flags & IORESOURCE_IO) {
- if (start < PCIBIOS_MIN_IO + chan->io_resource->start)
- start = PCIBIOS_MIN_IO + chan->io_resource->start;
+ if (start < PCIBIOS_MIN_IO + hose->resources[0].start)
+ start = PCIBIOS_MIN_IO + hose->resources[0].start;
/*
* Put everything into 0x00-0xff region modulo 0x400.
*/
- if (start & 0x300) {
+ if (start & 0x300)
start = (start + 0x3ff) & ~0x3ff;
- res->start = start;
- }
- } else if (res->flags & IORESOURCE_MEM) {
- if (start < PCIBIOS_MIN_MEM + chan->mem_resource->start)
- start = PCIBIOS_MIN_MEM + chan->mem_resource->start;
}
- res->start = start;
+ return start;
}
void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
- struct resource *res)
+ struct resource *res)
{
struct pci_channel *hose = dev->sysdata;
unsigned long offset = 0;
@@ -189,9 +218,8 @@
region->end = res->end - offset;
}
-void __devinit
-pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
- struct pci_bus_region *region)
+void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
+ struct pci_bus_region *region)
{
struct pci_channel *hose = dev->sysdata;
unsigned long offset = 0;
@@ -274,6 +302,86 @@
return str;
}
+static void __init
+pcibios_bus_report_status_early(struct pci_channel *hose,
+ int top_bus, int current_bus,
+ unsigned int status_mask, int warn)
+{
+ unsigned int pci_devfn;
+ u16 status;
+ int ret;
+
+ for (pci_devfn = 0; pci_devfn < 0xff; pci_devfn++) {
+ if (PCI_FUNC(pci_devfn))
+ continue;
+ ret = early_read_config_word(hose, top_bus, current_bus,
+ pci_devfn, PCI_STATUS, &status);
+ if (ret != PCIBIOS_SUCCESSFUL)
+ continue;
+ if (status == 0xffff)
+ continue;
+
+ early_write_config_word(hose, top_bus, current_bus,
+ pci_devfn, PCI_STATUS,
+ status & status_mask);
+ if (warn)
+ printk("(%02x:%02x: %04X) ", current_bus,
+ pci_devfn, status);
+ }
+}
+
+/*
+ * We can't use pci_find_device() here since we are
+ * called from interrupt context.
+ */
+static void __init_refok
+pcibios_bus_report_status(struct pci_bus *bus, unsigned int status_mask,
+ int warn)
+{
+ struct pci_dev *dev;
+
+ list_for_each_entry(dev, &bus->devices, bus_list) {
+ u16 status;
+
+ /*
+ * ignore host bridge - we handle
+ * that separately
+ */
+ if (dev->bus->number == 0 && dev->devfn == 0)
+ continue;
+
+ pci_read_config_word(dev, PCI_STATUS, &status);
+ if (status == 0xffff)
+ continue;
+
+ if ((status & status_mask) == 0)
+ continue;
+
+ /* clear the status errors */
+ pci_write_config_word(dev, PCI_STATUS, status & status_mask);
+
+ if (warn)
+ printk("(%s: %04X) ", pci_name(dev), status);
+ }
+
+ list_for_each_entry(dev, &bus->devices, bus_list)
+ if (dev->subordinate)
+ pcibios_bus_report_status(dev->subordinate, status_mask, warn);
+}
+
+void __init_refok pcibios_report_status(unsigned int status_mask, int warn)
+{
+ struct pci_channel *hose;
+
+ for (hose = hose_head; hose; hose = hose->next) {
+ if (unlikely(!hose->bus))
+ pcibios_bus_report_status_early(hose, hose_head->index,
+ hose->index, status_mask, warn);
+ else
+ pcibios_bus_report_status(hose->bus, status_mask, warn);
+ }
+}
+
int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
enum pci_mmap_state mmap_state, int write_combine)
{
@@ -302,9 +410,15 @@
{
struct pci_channel *chan = dev->sysdata;
- if (!chan->io_map_base)
+ if (unlikely(!chan->io_map_base)) {
chan->io_map_base = generic_io_base;
+ if (pci_domains_supported)
+ panic("To avoid data corruption io_map_base MUST be "
+ "set with multiple PCI domains.");
+ }
+
+
return (void __iomem *)(chan->io_map_base + port);
}
@@ -321,20 +435,9 @@
if (flags & IORESOURCE_IO)
return ioport_map_pci(dev, start, len);
-
- /*
- * Presently the IORESOURCE_MEM case is a bit special, most
- * SH7751 style PCI controllers have PCI memory at a fixed
- * location in the address space where no remapping is desired.
- * With the IORESOURCE_MEM case more care has to be taken
- * to inhibit page table mapping for legacy cores, but this is
- * punted off to __ioremap().
- * -- PFM.
- */
if (flags & IORESOURCE_MEM) {
if (flags & IORESOURCE_CACHEABLE)
return ioremap(start, len);
-
return ioremap_nocache(start, len);
}
diff --git a/arch/sh/drivers/pci/pcie-sh7786.c b/arch/sh/drivers/pci/pcie-sh7786.c
index ac37ee8..ae91a2d 100644
--- a/arch/sh/drivers/pci/pcie-sh7786.c
+++ b/arch/sh/drivers/pci/pcie-sh7786.c
@@ -1,7 +1,7 @@
/*
* Low-Level PCI Express Support for the SH7786
*
- * Copyright (C) 2009 Paul Mundt
+ * Copyright (C) 2009 - 2010 Paul Mundt
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
@@ -30,60 +30,84 @@
int (*port_init_hw)(struct sh7786_pcie_port *port);
} *sh7786_pcie_hwops;
-static struct resource sh7786_pci_32bit_mem_resources[] = {
+static struct resource sh7786_pci0_resources[] = {
{
- .name = "pci0_mem",
- .start = SH4A_PCIMEM_BASEA,
- .end = SH4A_PCIMEM_BASEA + SZ_64M - 1,
+ .name = "PCIe0 IO",
+ .start = 0xfd000000,
+ .end = 0xfd000000 + SZ_8M - 1,
+ .flags = IORESOURCE_IO,
+ }, {
+ .name = "PCIe0 MEM 0",
+ .start = 0xc0000000,
+ .end = 0xc0000000 + SZ_512M - 1,
+ .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
+ }, {
+ .name = "PCIe0 MEM 1",
+ .start = 0x10000000,
+ .end = 0x10000000 + SZ_64M - 1,
.flags = IORESOURCE_MEM,
}, {
- .name = "pci1_mem",
- .start = SH4A_PCIMEM_BASEA1,
- .end = SH4A_PCIMEM_BASEA1 + SZ_64M - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .name = "pci2_mem",
- .start = SH4A_PCIMEM_BASEA2,
- .end = SH4A_PCIMEM_BASEA2 + SZ_64M - 1,
- .flags = IORESOURCE_MEM,
+ .name = "PCIe0 MEM 2",
+ .start = 0xfe100000,
+ .end = 0xfe100000 + SZ_1M - 1,
},
};
-static struct resource sh7786_pci_29bit_mem_resource = {
- .start = SH4A_PCIMEM_BASE,
- .end = SH4A_PCIMEM_BASE + SZ_64M - 1,
- .flags = IORESOURCE_MEM,
+static struct resource sh7786_pci1_resources[] = {
+ {
+ .name = "PCIe1 IO",
+ .start = 0xfd800000,
+ .end = 0xfd800000 + SZ_8M - 1,
+ .flags = IORESOURCE_IO,
+ }, {
+ .name = "PCIe1 MEM 0",
+ .start = 0xa0000000,
+ .end = 0xa0000000 + SZ_512M - 1,
+ .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
+ }, {
+ .name = "PCIe1 MEM 1",
+ .start = 0x30000000,
+ .end = 0x30000000 + SZ_256M - 1,
+ .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
+ }, {
+ .name = "PCIe1 MEM 2",
+ .start = 0xfe300000,
+ .end = 0xfe300000 + SZ_1M - 1,
+ },
};
-static struct resource sh7786_pci_io_resources[] = {
+static struct resource sh7786_pci2_resources[] = {
{
- .name = "pci0_io",
- .start = SH4A_PCIIO_BASE,
- .end = SH4A_PCIIO_BASE + SZ_8M - 1,
- .flags = IORESOURCE_IO,
+ .name = "PCIe2 IO",
+ .start = 0xfc800000,
+ .end = 0xfc800000 + SZ_4M - 1,
}, {
- .name = "pci1_io",
- .start = SH4A_PCIIO_BASE1,
- .end = SH4A_PCIIO_BASE1 + SZ_8M - 1,
- .flags = IORESOURCE_IO,
+ .name = "PCIe2 MEM 0",
+ .start = 0x80000000,
+ .end = 0x80000000 + SZ_512M - 1,
+ .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
}, {
- .name = "pci2_io",
- .start = SH4A_PCIIO_BASE2,
- .end = SH4A_PCIIO_BASE2 + SZ_4M - 1,
- .flags = IORESOURCE_IO,
+ .name = "PCIe2 MEM 1",
+ .start = 0x20000000,
+ .end = 0x20000000 + SZ_256M - 1,
+ .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
+ }, {
+ .name = "PCIe2 MEM 2",
+ .start = 0xfcd00000,
+ .end = 0xfcd00000 + SZ_1M - 1,
},
};
extern struct pci_ops sh7786_pci_ops;
-#define DEFINE_CONTROLLER(start, idx) \
-{ \
- .pci_ops = &sh7786_pci_ops, \
- .reg_base = start, \
- /* mem_resource filled in at probe time */ \
- .mem_offset = 0, \
- .io_resource = &sh7786_pci_io_resources[idx], \
- .io_offset = 0, \
+#define DEFINE_CONTROLLER(start, idx) \
+{ \
+ .pci_ops = &sh7786_pci_ops, \
+ .resources = sh7786_pci##idx##_resources, \
+ .nr_resources = ARRAY_SIZE(sh7786_pci##idx##_resources), \
+ .reg_base = start, \
+ .mem_offset = 0, \
+ .io_offset = 0, \
}
static struct pci_channel sh7786_pci_channels[] = {
@@ -180,7 +204,9 @@
{
struct pci_channel *chan = port->hose;
unsigned int data;
- int ret;
+ phys_addr_t memphys;
+ size_t memsize;
+ int ret, i;
/* Begin initialization */
pci_write_reg(chan, 0, SH4A_PCIETCTLR);
@@ -203,15 +229,24 @@
data |= PCI_CAP_ID_EXP;
pci_write_reg(chan, data, SH4A_PCIEEXPCAP0);
- /* Enable x4 link width and extended sync. */
+ /* Enable data link layer active state reporting */
+ pci_write_reg(chan, PCI_EXP_LNKCAP_DLLLARC, SH4A_PCIEEXPCAP3);
+
+ /* Enable extended sync and ASPM L0s support */
data = pci_read_reg(chan, SH4A_PCIEEXPCAP4);
- data &= ~(PCI_EXP_LNKSTA_NLW << 16);
- data |= (1 << 22) | PCI_EXP_LNKCTL_ES;
+ data &= ~PCI_EXP_LNKCTL_ASPMC;
+ data |= PCI_EXP_LNKCTL_ES | 1;
pci_write_reg(chan, data, SH4A_PCIEEXPCAP4);
+ /* Write out the physical slot number */
+ data = pci_read_reg(chan, SH4A_PCIEEXPCAP5);
+ data &= ~PCI_EXP_SLTCAP_PSN;
+ data |= (port->index + 1) << 19;
+ pci_write_reg(chan, data, SH4A_PCIEEXPCAP5);
+
/* Set the completion timer timeout to the maximum 32ms. */
data = pci_read_reg(chan, SH4A_PCIETLCTLR);
- data &= ~0xffff;
+ data &= ~0x3f00;
data |= 0x32 << 8;
pci_write_reg(chan, data, SH4A_PCIETLCTLR);
@@ -224,6 +259,33 @@
data |= (0xff << 16);
pci_write_reg(chan, data, SH4A_PCIEMACCTLR);
+ memphys = __pa(memory_start);
+ memsize = roundup_pow_of_two(memory_end - memory_start);
+
+ /*
+ * If there's more than 512MB of memory, we need to roll over to
+ * LAR1/LAMR1.
+ */
+ if (memsize > SZ_512M) {
+ __raw_writel(memphys + SZ_512M, chan->reg_base + SH4A_PCIELAR1);
+ __raw_writel(((memsize - SZ_512M) - SZ_256) | 1,
+ chan->reg_base + SH4A_PCIELAMR1);
+ memsize = SZ_512M;
+ } else {
+ /*
+ * Otherwise just zero it out and disable it.
+ */
+ __raw_writel(0, chan->reg_base + SH4A_PCIELAR1);
+ __raw_writel(0, chan->reg_base + SH4A_PCIELAMR1);
+ }
+
+ /*
+ * LAR0/LAMR0 covers up to the first 512MB, which is enough to
+ * cover all of lowmem on most platforms.
+ */
+ __raw_writel(memphys, chan->reg_base + SH4A_PCIELAR0);
+ __raw_writel((memsize - SZ_256) | 1, chan->reg_base + SH4A_PCIELAMR0);
+
/* Finish initialization */
data = pci_read_reg(chan, SH4A_PCIETCTLR);
data |= 0x1;
@@ -243,10 +305,14 @@
if (unlikely(ret != 0))
return -ENODEV;
- pci_write_reg(chan, 0x00100007, SH4A_PCIEPCICONF1);
+ data = pci_read_reg(chan, SH4A_PCIEPCICONF1);
+ data &= ~(PCI_STATUS_DEVSEL_MASK << 16);
+ data |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER |
+ (PCI_STATUS_CAP_LIST | PCI_STATUS_DEVSEL_FAST) << 16;
+ pci_write_reg(chan, data, SH4A_PCIEPCICONF1);
+
pci_write_reg(chan, 0x80888000, SH4A_PCIETXVC0DCTLR);
pci_write_reg(chan, 0x00222000, SH4A_PCIERXVC0DCTLR);
- pci_write_reg(chan, 0x000050A0, SH4A_PCIEEXPCAP2);
wmb();
@@ -254,15 +320,32 @@
printk(KERN_NOTICE "PCI: PCIe#%d link width %d\n",
port->index, (data >> 20) & 0x3f);
- pci_write_reg(chan, 0x007c0000, SH4A_PCIEPAMR0);
- pci_write_reg(chan, 0x00000000, SH4A_PCIEPARH0);
- pci_write_reg(chan, 0x00000000, SH4A_PCIEPARL0);
- pci_write_reg(chan, 0x80000100, SH4A_PCIEPTCTLR0);
- pci_write_reg(chan, 0x03fc0000, SH4A_PCIEPAMR2);
- pci_write_reg(chan, 0x00000000, SH4A_PCIEPARH2);
- pci_write_reg(chan, 0x00000000, SH4A_PCIEPARL2);
- pci_write_reg(chan, 0x80000000, SH4A_PCIEPTCTLR2);
+ for (i = 0; i < chan->nr_resources; i++) {
+ struct resource *res = chan->resources + i;
+ resource_size_t size;
+ u32 enable_mask;
+
+ pci_write_reg(chan, 0x00000000, SH4A_PCIEPTCTLR(i));
+
+ size = resource_size(res);
+
+ /*
+ * The PAMR mask is calculated in units of 256kB, which
+ * keeps things pretty simple.
+ */
+ __raw_writel(((roundup_pow_of_two(size) / SZ_256K) - 1) << 18,
+ chan->reg_base + SH4A_PCIEPAMR(i));
+
+ pci_write_reg(chan, 0x00000000, SH4A_PCIEPARH(i));
+ pci_write_reg(chan, 0x00000000, SH4A_PCIEPARL(i));
+
+ enable_mask = MASK_PARE;
+ if (res->flags & IORESOURCE_IO)
+ enable_mask |= MASK_SPC;
+
+ pci_write_reg(chan, enable_mask, SH4A_PCIEPTCTLR(i));
+ }
return 0;
}
@@ -296,9 +379,7 @@
if (unlikely(ret < 0))
return ret;
- register_pci_controller(port->hose);
-
- return 0;
+ return register_pci_controller(port->hose);
}
static struct sh7786_pcie_hwops sh7786_65nm_pcie_hwops __initdata = {
@@ -332,17 +413,7 @@
port->index = i;
port->hose = sh7786_pci_channels + i;
- port->hose->io_map_base = port->hose->io_resource->start;
-
- /*
- * Check if we are booting in 29 or 32-bit mode
- *
- * 32-bit mode provides each controller with its own
- * memory window, while 29-bit mode uses a shared one.
- */
- port->hose->mem_resource = test_mode_pin(MODE_PIN10) ?
- &sh7786_pci_32bit_mem_resources[i] :
- &sh7786_pci_29bit_mem_resource;
+ port->hose->io_map_base = port->hose->resources[0].start;
ret |= sh7786_pcie_hwops->port_init_hw(port);
}
diff --git a/arch/sh/drivers/pci/pcie-sh7786.h b/arch/sh/drivers/pci/pcie-sh7786.h
index c655290..90a6992 100644
--- a/arch/sh/drivers/pci/pcie-sh7786.h
+++ b/arch/sh/drivers/pci/pcie-sh7786.h
@@ -30,47 +30,9 @@
* for other(Max Payload Size=4096B,PCIIO_SIZE=8M)
*/
-/* PCI0-0: PCI I/O space */
-#define SH4A_PCIIO_BASE 0xFD000000 /* PCI I/O for controller 0 */
-#define SH4A_PCIIO_BASE1 0xFD800000 /* PCI I/O for controller 1 (Rev1.14)*/
-#define SH4A_PCIIO_BASE2 0xFC800000 /* PCI I/O for controller 2 (Rev1.171)*/
-
-#define SH4A_PCIIO_SIZE64 0x00010000 /* PLX allows only 64K */
-#define SH4A_PCIIO_SIZE 0x00800000 /* 8M */
-#define SH4A_PCIIO_SIZE2 0x00400000 /* 4M (Rev1.171)*/
-
-/* PCI0-1: PCI memory space 29-bit address */
-#define SH4A_PCIMEM_BASE 0x10000000
-#define SH4A_PCIMEM_SIZE 0x04000000 /* 64M */
-
-/* PCI0-2: PCI memory space 32-bit address */
-#define SH4A_PCIMEM_BASEA 0xC0000000 /* for controller 0 */
-#define SH4A_PCIMEM_BASEA1 0xA0000000 /* for controller 1 (Rev1.14)*/
-#define SH4A_PCIMEM_BASEA2 0x80000000 /* for controller 2 (Rev1.171)*/
-#define SH4A_PCIMEM_SIZEA 0x20000000 /* 512M */
-
/* PCI0: PCI memory target transfer 32-bit address translation value(Rev1.11T)*/
#define SH4A_PCIBMSTR_TRANSLATION 0x20000000
-#define SH4A_PCI_DEVICE_ID 0x0002
-#define SH4A_PCI_VENDOR_ID 0x1912
-
-// PCI compatible 000-03f
-#define PCI_CMD 0x004
-#define PCI_RID 0x008
-#define PCI_IBAR 0x010
-#define PCI_MBAR0 0x014
-#define PCI_MBAR1 0x018
-
-/* PCI power management/MSI/capablity 040-0ff */
-/* PCIE extended 100-fff */
-
-/* SH7786 device identification */ // Rev1.171
-#define SH4A_PVR (0xFF000030)
-#define SH4A_PVR_SHX3 (0x10400000)
-#define SH4A_PRR (0xFF000044)
-#define SH4A_PRR_SH7786 (0x00000400) // Rev1.171
-
/* SPVCR0 */
#define SH4A_PCIEVCR0 (0x000000) /* R - 0x0000 0000 32 */
#define BITS_TOP_MB (24)
@@ -350,23 +312,23 @@
#define SH4A_PCIECSAR5 (0x0202B4) /* R/W R/W 0x0000 0000 32 */
#define SH4A_PCIESTCTLR5 (0x0202B8) /* R/W R/W 0x0000 0000 32 */
-/* PCIEPARL0 */
-#define SH4A_PCIEPARL0 (0x020400) /* R/W R/W 0x0000 0000 32 */
+/* PCIEPARL */
+#define SH4A_PCIEPARL(x) (0x020400 + ((x) * 0x20)) /* R/W R/W 0x0000 0000 32 */
#define BITS_PAL (18)
#define MASK_PAL (0x3fff<<BITS_PAL)
-/* PCIEPARH0 */
-#define SH4A_PCIEPARH0 (0x020404) /* R/W R/W 0x0000 0000 32 */
+/* PCIEPARH */
+#define SH4A_PCIEPARH(x) (0x020404 + ((x) * 0x20)) /* R/W R/W 0x0000 0000 32 */
#define BITS_PAH (0)
#define MASK_PAH (0xffffffff<<BITS_PAH)
-/* PCIEPAMR0 */
-#define SH4A_PCIEPAMR0 (0x020408) /* R/W R/W 0x0000 0000 32 */
+/* PCIEPAMR */
+#define SH4A_PCIEPAMR(x) (0x020408 + ((x) * 0x20)) /* R/W R/W 0x0000 0000 32 */
#define BITS_PAM (18)
#define MASK_PAM (0x3fff<<BITS_PAM)
-/* PCIEPTCTLR0 */
-#define SH4A_PCIEPTCTLR0 (0x02040C) /* R/W R/W 0x0000 0000 32 */
+/* PCIEPTCTLR */
+#define SH4A_PCIEPTCTLR(x) (0x02040C + ((x) * 0x20))
#define BITS_PARE (31)
#define MASK_PARE (0x1<<BITS_PARE)
#define BITS_TC (20)
@@ -378,26 +340,6 @@
#define BITS_SPC (8)
#define MASK_SPC (0x1<<BITS_SPC)
-#define SH4A_PCIEPARL1 (0x020420) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEPARH1 (0x020424) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEPAMR1 (0x020428) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEPTCTLR1 (0x02042C) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEPARL2 (0x020440) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEPARH2 (0x020444) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEPAMR2 (0x020448) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEPTCTLR2 (0x02044C) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEPARL3 (0x020460) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEPARH3 (0x020464) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEPAMR3 (0x020468) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEPTCTLR3 (0x02046C) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEPARL4 (0x020480) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEPARH4 (0x020484) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEPAMR4 (0x020488) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEPTCTLR4 (0x02048C) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEPARL5 (0x0204A0) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEPARH5 (0x0204A4) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEPAMR5 (0x0204A8) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEPTCTLR5 (0x0204AC) /* R/W R/W 0x0000 0000 32 */
#define SH4A_PCIEDMAOR (0x021000) /* R/W R/W 0x0000 0000 32 */
#define SH4A_PCIEDMSAR0 (0x021100) /* R/W R/W 0x0000 0000 32 */
#define SH4A_PCIEDMSAHR0 (0x021104) /* R/W R/W 0x0000 0000 32 */
diff --git a/arch/sh/drivers/superhyway/ops-sh4-202.c b/arch/sh/drivers/superhyway/ops-sh4-202.c
index 3b14bf8..6da62e9 100644
--- a/arch/sh/drivers/superhyway/ops-sh4-202.c
+++ b/arch/sh/drivers/superhyway/ops-sh4-202.c
@@ -134,8 +134,8 @@
*
* Do not trust the documentation, for it is evil.
*/
- vcrh = ctrl_inl(base);
- vcrl = ctrl_inl(base + sizeof(u32));
+ vcrh = __raw_readl(base);
+ vcrl = __raw_readl(base + sizeof(u32));
tmp = ((u64)vcrh << 32) | vcrl;
memcpy(vcr, &tmp, sizeof(u64));
@@ -147,8 +147,8 @@
{
u64 tmp = *(u64 *)&vcr;
- ctrl_outl((tmp >> 32) & 0xffffffff, base);
- ctrl_outl(tmp & 0xffffffff, base + sizeof(u32));
+ __raw_writel((tmp >> 32) & 0xffffffff, base);
+ __raw_writel(tmp & 0xffffffff, base + sizeof(u32));
return 0;
}
diff --git a/arch/sh/include/asm/Kbuild b/arch/sh/include/asm/Kbuild
index e121c30..46cb934 100644
--- a/arch/sh/include/asm/Kbuild
+++ b/arch/sh/include/asm/Kbuild
@@ -1,6 +1,8 @@
include include/asm-generic/Kbuild.asm
-header-y += cachectl.h cpu-features.h
+header-y += cachectl.h
+header-y += cpu-features.h
+header-y += hw_breakpoint.h
unifdef-y += unistd_32.h
unifdef-y += unistd_64.h
diff --git a/arch/sh/include/asm/addrspace.h b/arch/sh/include/asm/addrspace.h
index 99d6b3e..446b383 100644
--- a/arch/sh/include/asm/addrspace.h
+++ b/arch/sh/include/asm/addrspace.h
@@ -28,7 +28,7 @@
/* Returns the privileged segment base of a given address */
#define PXSEG(a) (((unsigned long)(a)) & 0xe0000000)
-#if defined(CONFIG_29BIT) || defined(CONFIG_PMB_FIXED)
+#ifdef CONFIG_29BIT
/*
* Map an address to a certain privileged segment
*/
@@ -40,7 +40,15 @@
((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P3SEG))
#define P4SEGADDR(a) \
((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P4SEG))
-#endif /* 29BIT || PMB_FIXED */
+#else
+/*
+ * These will never work in 32-bit, don't even bother.
+ */
+#define P1SEGADDR(a) __futile_remapping_attempt
+#define P2SEGADDR(a) __futile_remapping_attempt
+#define P3SEGADDR(a) __futile_remapping_attempt
+#define P4SEGADDR(a) __futile_remapping_attempt
+#endif
#endif /* P1SEG */
/* Check if an address can be reached in 29 bits */
@@ -57,11 +65,5 @@
#define P3_ADDR_MAX P4SEG
#endif
-#ifndef __ASSEMBLY__
-#ifdef CONFIG_PMB
-extern int __in_29bit_mode(void);
-#endif /* CONFIG_PMB */
-#endif /* __ASSEMBLY__ */
-
#endif /* __KERNEL__ */
#endif /* __ASM_SH_ADDRSPACE_H */
diff --git a/arch/sh/include/asm/alignment.h b/arch/sh/include/asm/alignment.h
new file mode 100644
index 0000000..b12efec
--- /dev/null
+++ b/arch/sh/include/asm/alignment.h
@@ -0,0 +1,21 @@
+#ifndef __ASM_SH_ALIGNMENT_H
+#define __ASM_SH_ALIGNMENT_H
+
+#include <linux/types.h>
+
+extern void inc_unaligned_byte_access(void);
+extern void inc_unaligned_word_access(void);
+extern void inc_unaligned_dword_access(void);
+extern void inc_unaligned_multi_access(void);
+extern void inc_unaligned_user_access(void);
+extern void inc_unaligned_kernel_access(void);
+
+#define UM_WARN (1 << 0)
+#define UM_FIXUP (1 << 1)
+#define UM_SIGNAL (1 << 2)
+
+extern unsigned int unaligned_user_action(void);
+
+extern void unaligned_fixups_notify(struct task_struct *, insn_size_t, struct pt_regs *);
+
+#endif /* __ASM_SH_ALIGNMENT_H */
diff --git a/arch/sh/include/asm/atomic-grb.h b/arch/sh/include/asm/atomic-grb.h
index 4c5b7db..a273c88 100644
--- a/arch/sh/include/asm/atomic-grb.h
+++ b/arch/sh/include/asm/atomic-grb.h
@@ -120,50 +120,4 @@
: "memory" , "r0", "r1");
}
-static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
-{
- int ret;
-
- __asm__ __volatile__ (
- " .align 2 \n\t"
- " mova 1f, r0 \n\t"
- " nop \n\t"
- " mov r15, r1 \n\t"
- " mov #-8, r15 \n\t"
- " mov.l @%1, %0 \n\t"
- " cmp/eq %2, %0 \n\t"
- " bf 1f \n\t"
- " mov.l %3, @%1 \n\t"
- "1: mov r1, r15 \n\t"
- : "=&r" (ret)
- : "r" (v), "r" (old), "r" (new)
- : "memory" , "r0", "r1" , "t");
-
- return ret;
-}
-
-static inline int atomic_add_unless(atomic_t *v, int a, int u)
-{
- int ret;
- unsigned long tmp;
-
- __asm__ __volatile__ (
- " .align 2 \n\t"
- " mova 1f, r0 \n\t"
- " nop \n\t"
- " mov r15, r1 \n\t"
- " mov #-12, r15 \n\t"
- " mov.l @%2, %1 \n\t"
- " mov %1, %0 \n\t"
- " cmp/eq %4, %0 \n\t"
- " bt/s 1f \n\t"
- " add %3, %1 \n\t"
- " mov.l %1, @%2 \n\t"
- "1: mov r1, r15 \n\t"
- : "=&r" (ret), "=&r" (tmp)
- : "r" (v), "r" (a), "r" (u)
- : "memory" , "r0", "r1" , "t");
-
- return ret != u;
-}
#endif /* __ASM_SH_ATOMIC_GRB_H */
diff --git a/arch/sh/include/asm/atomic-llsc.h b/arch/sh/include/asm/atomic-llsc.h
index b040e1e..4b00b78 100644
--- a/arch/sh/include/asm/atomic-llsc.h
+++ b/arch/sh/include/asm/atomic-llsc.h
@@ -104,31 +104,4 @@
: "t");
}
-#define atomic_cmpxchg(v, o, n) (cmpxchg(&((v)->counter), (o), (n)))
-
-/**
- * atomic_add_unless - add unless the number is a given value
- * @v: pointer of type atomic_t
- * @a: the amount to add to v...
- * @u: ...unless v is equal to u.
- *
- * Atomically adds @a to @v, so long as it was not @u.
- * Returns non-zero if @v was not @u, and zero otherwise.
- */
-static inline int atomic_add_unless(atomic_t *v, int a, int u)
-{
- int c, old;
- c = atomic_read(v);
- for (;;) {
- if (unlikely(c == (u)))
- break;
- old = atomic_cmpxchg((v), c, c + (a));
- if (likely(old == c))
- break;
- c = old;
- }
-
- return c != (u);
-}
-
#endif /* __ASM_SH_ATOMIC_LLSC_H */
diff --git a/arch/sh/include/asm/atomic.h b/arch/sh/include/asm/atomic.h
index b16388d..275a448 100644
--- a/arch/sh/include/asm/atomic.h
+++ b/arch/sh/include/asm/atomic.h
@@ -25,58 +25,43 @@
#endif
#define atomic_add_negative(a, v) (atomic_add_return((a), (v)) < 0)
+#define atomic_dec_return(v) atomic_sub_return(1, (v))
+#define atomic_inc_return(v) atomic_add_return(1, (v))
+#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0)
+#define atomic_sub_and_test(i,v) (atomic_sub_return((i), (v)) == 0)
+#define atomic_dec_and_test(v) (atomic_sub_return(1, (v)) == 0)
+#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
-#define atomic_dec_return(v) atomic_sub_return(1,(v))
-#define atomic_inc_return(v) atomic_add_return(1,(v))
+#define atomic_inc(v) atomic_add(1, (v))
+#define atomic_dec(v) atomic_sub(1, (v))
-/*
- * atomic_inc_and_test - increment and test
+#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
+#define atomic_cmpxchg(v, o, n) (cmpxchg(&((v)->counter), (o), (n)))
+
+/**
+ * atomic_add_unless - add unless the number is a given value
* @v: pointer of type atomic_t
+ * @a: the amount to add to v...
+ * @u: ...unless v is equal to u.
*
- * Atomically increments @v by 1
- * and returns true if the result is zero, or false for all
- * other cases.
+ * Atomically adds @a to @v, so long as it was not @u.
+ * Returns non-zero if @v was not @u, and zero otherwise.
*/
-#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0)
-
-#define atomic_sub_and_test(i,v) (atomic_sub_return((i), (v)) == 0)
-#define atomic_dec_and_test(v) (atomic_sub_return(1, (v)) == 0)
-
-#define atomic_inc(v) atomic_add(1,(v))
-#define atomic_dec(v) atomic_sub(1,(v))
-
-#if !defined(CONFIG_GUSA_RB) && !defined(CONFIG_CPU_SH4A)
-static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
-{
- int ret;
- unsigned long flags;
-
- local_irq_save(flags);
- ret = v->counter;
- if (likely(ret == old))
- v->counter = new;
- local_irq_restore(flags);
-
- return ret;
-}
-
static inline int atomic_add_unless(atomic_t *v, int a, int u)
{
- int ret;
- unsigned long flags;
+ int c, old;
+ c = atomic_read(v);
+ for (;;) {
+ if (unlikely(c == (u)))
+ break;
+ old = atomic_cmpxchg((v), c, c + (a));
+ if (likely(old == c))
+ break;
+ c = old;
+ }
- local_irq_save(flags);
- ret = v->counter;
- if (ret != u)
- v->counter += a;
- local_irq_restore(flags);
-
- return ret != u;
+ return c != (u);
}
-#endif /* !CONFIG_GUSA_RB && !CONFIG_CPU_SH4A */
-
-#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
-#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
#define smp_mb__before_atomic_dec() smp_mb()
#define smp_mb__after_atomic_dec() smp_mb()
diff --git a/arch/sh/include/asm/cacheflush.h b/arch/sh/include/asm/cacheflush.h
index dda96eb..da3ebec 100644
--- a/arch/sh/include/asm/cacheflush.h
+++ b/arch/sh/include/asm/cacheflush.h
@@ -63,6 +63,14 @@
if (boot_cpu_data.dcache.n_aliases && PageAnon(page))
__flush_anon_page(page, vmaddr);
}
+static inline void flush_kernel_vmap_range(void *addr, int size)
+{
+ __flush_wback_region(addr, size);
+}
+static inline void invalidate_kernel_vmap_range(void *addr, int size)
+{
+ __flush_invalidate_region(addr, size);
+}
#define ARCH_HAS_FLUSH_KERNEL_DCACHE_PAGE
static inline void flush_kernel_dcache_page(struct page *page)
diff --git a/arch/sh/include/asm/clock.h b/arch/sh/include/asm/clock.h
index 9fe7d7f..11da4c5 100644
--- a/arch/sh/include/asm/clock.h
+++ b/arch/sh/include/asm/clock.h
@@ -146,8 +146,17 @@
.flags = _flags, \
}
+struct clk_div4_table {
+ struct clk_div_mult_table *div_mult_table;
+ void (*kick)(struct clk *clk);
+};
+
int sh_clk_div4_register(struct clk *clks, int nr,
- struct clk_div_mult_table *table);
+ struct clk_div4_table *table);
+int sh_clk_div4_enable_register(struct clk *clks, int nr,
+ struct clk_div4_table *table);
+int sh_clk_div4_reparent_register(struct clk *clks, int nr,
+ struct clk_div4_table *table);
#define SH_CLK_DIV6(_name, _parent, _reg, _flags) \
{ \
diff --git a/arch/sh/include/asm/cmpxchg-grb.h b/arch/sh/include/asm/cmpxchg-grb.h
index e2681ab..4676bf5 100644
--- a/arch/sh/include/asm/cmpxchg-grb.h
+++ b/arch/sh/include/asm/cmpxchg-grb.h
@@ -57,11 +57,10 @@
" mov.l @%1, %0 \n\t" /* load old value */
" cmp/eq %0, %2 \n\t"
" bf 1f \n\t" /* if not equal */
- " mov.l %2, @%1 \n\t" /* store new value */
+ " mov.l %3, @%1 \n\t" /* store new value */
"1: mov r1, r15 \n\t" /* LOGOUT */
- : "=&r" (retval),
- "+r" (m)
- : "r" (new)
+ : "=&r" (retval)
+ : "r" (m), "r" (old), "r" (new)
: "memory" , "r0", "r1", "t");
return retval;
diff --git a/arch/sh/include/asm/dma-mapping.h b/arch/sh/include/asm/dma-mapping.h
index 87ced13..bea3337 100644
--- a/arch/sh/include/asm/dma-mapping.h
+++ b/arch/sh/include/asm/dma-mapping.h
@@ -89,8 +89,6 @@
{
struct dma_map_ops *ops = get_dma_ops(dev);
- WARN_ON(irqs_disabled()); /* for portability */
-
if (dma_release_from_coherent(dev, get_order(size), vaddr))
return;
diff --git a/arch/sh/include/asm/dma-sh.h b/arch/sh/include/asm/dma-sh.h
index 78eed3e0..e934a2e 100644
--- a/arch/sh/include/asm/dma-sh.h
+++ b/arch/sh/include/asm/dma-sh.h
@@ -20,14 +20,14 @@
defined(CONFIG_CPU_SUBTYPE_SH7780) || \
defined(CONFIG_CPU_SUBTYPE_SH7785)
#define dmaor_read_reg(n) \
- (n ? ctrl_inw(SH_DMAC_BASE1 + DMAOR) \
- : ctrl_inw(SH_DMAC_BASE0 + DMAOR))
+ (n ? __raw_readw(SH_DMAC_BASE1 + DMAOR) \
+ : __raw_readw(SH_DMAC_BASE0 + DMAOR))
#define dmaor_write_reg(n, data) \
- (n ? ctrl_outw(data, SH_DMAC_BASE1 + DMAOR) \
- : ctrl_outw(data, SH_DMAC_BASE0 + DMAOR))
+ (n ? __raw_writew(data, SH_DMAC_BASE1 + DMAOR) \
+ : __raw_writew(data, SH_DMAC_BASE0 + DMAOR))
#else /* Other CPU */
-#define dmaor_read_reg(n) ctrl_inw(SH_DMAC_BASE0 + DMAOR)
-#define dmaor_write_reg(n, data) ctrl_outw(data, SH_DMAC_BASE0 + DMAOR)
+#define dmaor_read_reg(n) __raw_readw(SH_DMAC_BASE0 + DMAOR)
+#define dmaor_write_reg(n, data) __raw_writew(data, SH_DMAC_BASE0 + DMAOR)
#endif
static int dmte_irq_map[] __maybe_unused = {
@@ -64,8 +64,10 @@
#define ACK_L 0x00010000
#define DM_INC 0x00004000
#define DM_DEC 0x00008000
+#define DM_FIX 0x0000c000
#define SM_INC 0x00001000
#define SM_DEC 0x00002000
+#define SM_FIX 0x00003000
#define RS_IN 0x00000200
#define RS_OUT 0x00000300
#define TS_BLK 0x00000040
@@ -83,7 +85,7 @@
* Define the default configuration for dual address memory-memory transfer.
* The 0x400 value represents auto-request, external->external.
*/
-#define RS_DUAL (DM_INC | SM_INC | 0x400 | TS_32)
+#define RS_DUAL (DM_INC | SM_INC | 0x400 | TS_INDEX2VAL(XMIT_SZ_32BIT))
/* DMA base address */
static u32 dma_base_addr[] __maybe_unused = {
@@ -123,10 +125,47 @@
*/
#define SHDMA_MIX_IRQ (1 << 1)
#define SHDMA_DMAOR1 (1 << 2)
-#define SHDMA_DMAE1 (1 << 3)
+#define SHDMA_DMAE1 (1 << 3)
+
+enum sh_dmae_slave_chan_id {
+ SHDMA_SLAVE_SCIF0_TX,
+ SHDMA_SLAVE_SCIF0_RX,
+ SHDMA_SLAVE_SCIF1_TX,
+ SHDMA_SLAVE_SCIF1_RX,
+ SHDMA_SLAVE_SCIF2_TX,
+ SHDMA_SLAVE_SCIF2_RX,
+ SHDMA_SLAVE_SCIF3_TX,
+ SHDMA_SLAVE_SCIF3_RX,
+ SHDMA_SLAVE_SCIF4_TX,
+ SHDMA_SLAVE_SCIF4_RX,
+ SHDMA_SLAVE_SCIF5_TX,
+ SHDMA_SLAVE_SCIF5_RX,
+ SHDMA_SLAVE_SIUA_TX,
+ SHDMA_SLAVE_SIUA_RX,
+ SHDMA_SLAVE_SIUB_TX,
+ SHDMA_SLAVE_SIUB_RX,
+ SHDMA_SLAVE_NUMBER, /* Must stay last */
+};
+
+struct sh_dmae_slave_config {
+ enum sh_dmae_slave_chan_id slave_id;
+ dma_addr_t addr;
+ u32 chcr;
+ char mid_rid;
+};
struct sh_dmae_pdata {
unsigned int mode;
+ struct sh_dmae_slave_config *config;
+ int config_num;
+};
+
+struct device;
+
+struct sh_dmae_slave {
+ enum sh_dmae_slave_chan_id slave_id; /* Set by the platform */
+ struct device *dma_dev; /* Set by the platform */
+ struct sh_dmae_slave_config *config; /* Set by the driver */
};
#endif /* __DMA_SH_H */
diff --git a/arch/sh/include/asm/dwarf.h b/arch/sh/include/asm/dwarf.h
index bdccbbf..d62abd1 100644
--- a/arch/sh/include/asm/dwarf.h
+++ b/arch/sh/include/asm/dwarf.h
@@ -243,16 +243,13 @@
unsigned long cie_pointer;
- struct list_head link;
-
unsigned long flags;
#define DWARF_CIE_Z_AUGMENTATION (1 << 0)
- /*
- * 'mod' will be non-NULL if this CIE came from a module's
- * .eh_frame section.
- */
- struct module *mod;
+ /* linked-list entry if this CIE is from a module */
+ struct list_head link;
+
+ struct rb_node node;
};
/**
@@ -266,13 +263,11 @@
unsigned long address_range;
unsigned char *instructions;
unsigned char *end;
+
+ /* linked-list entry if this FDE is from a module */
struct list_head link;
- /*
- * 'mod' will be non-NULL if this FDE came from a module's
- * .eh_frame section.
- */
- struct module *mod;
+ struct rb_node node;
};
/**
diff --git a/arch/sh/include/asm/fixmap.h b/arch/sh/include/asm/fixmap.h
index 5ac1e40..6e7cea4 100644
--- a/arch/sh/include/asm/fixmap.h
+++ b/arch/sh/include/asm/fixmap.h
@@ -55,16 +55,29 @@
#define FIX_N_COLOURS 8
FIX_CMAP_BEGIN,
FIX_CMAP_END = FIX_CMAP_BEGIN + (FIX_N_COLOURS * NR_CPUS) - 1,
- FIX_UNCACHED,
+
#ifdef CONFIG_HIGHMEM
FIX_KMAP_BEGIN, /* reserved pte's for temporary kernel mappings */
FIX_KMAP_END = FIX_KMAP_BEGIN+(KM_TYPE_NR*NR_CPUS)-1,
#endif
+
+#ifdef CONFIG_IOREMAP_FIXED
+ /*
+ * FIX_IOREMAP entries are useful for mapping physical address
+ * space before ioremap() is useable, e.g. really early in boot
+ * before kmalloc() is working.
+ */
+#define FIX_N_IOREMAPS 32
+ FIX_IOREMAP_BEGIN,
+ FIX_IOREMAP_END = FIX_IOREMAP_BEGIN + FIX_N_IOREMAPS,
+#endif
+
__end_of_fixed_addresses
};
extern void __set_fixmap(enum fixed_addresses idx,
unsigned long phys, pgprot_t flags);
+extern void __clear_fixmap(enum fixed_addresses idx, pgprot_t flags);
#define set_fixmap(idx, phys) \
__set_fixmap(idx, phys, PAGE_KERNEL)
diff --git a/arch/sh/include/asm/fpu.h b/arch/sh/include/asm/fpu.h
index fb6bbb9..06c4281 100644
--- a/arch/sh/include/asm/fpu.h
+++ b/arch/sh/include/asm/fpu.h
@@ -2,8 +2,8 @@
#define __ASM_SH_FPU_H
#ifndef __ASSEMBLY__
-#include <linux/preempt.h>
-#include <asm/ptrace.h>
+
+struct task_struct;
#ifdef CONFIG_SH_FPU
static inline void release_fpu(struct pt_regs *regs)
@@ -16,22 +16,23 @@
regs->sr &= ~SR_FD;
}
-struct task_struct;
-
extern void save_fpu(struct task_struct *__tsk);
-void fpu_state_restore(struct pt_regs *regs);
+extern void restore_fpu(struct task_struct *__tsk);
+extern void fpu_state_restore(struct pt_regs *regs);
+extern void __fpu_state_restore(void);
#else
-
-#define save_fpu(tsk) do { } while (0)
-#define release_fpu(regs) do { } while (0)
-#define grab_fpu(regs) do { } while (0)
-#define fpu_state_restore(regs) do { } while (0)
-
+#define save_fpu(tsk) do { } while (0)
+#define restore_fpu(tsk) do { } while (0)
+#define release_fpu(regs) do { } while (0)
+#define grab_fpu(regs) do { } while (0)
+#define fpu_state_restore(regs) do { } while (0)
+#define __fpu_state_restore(regs) do { } while (0)
#endif
struct user_regset;
extern int do_fpu_inst(unsigned short, struct pt_regs *);
+extern int init_fpu(struct task_struct *);
extern int fpregs_get(struct task_struct *target,
const struct user_regset *regset,
@@ -65,18 +66,6 @@
preempt_enable();
}
-static inline int init_fpu(struct task_struct *tsk)
-{
- if (tsk_used_math(tsk)) {
- if ((boot_cpu_data.flags & CPU_HAS_FPU) && tsk == current)
- unlazy_fpu(tsk, task_pt_regs(tsk));
- return 0;
- }
-
- set_stopped_child_used_math(tsk);
- return 0;
-}
-
#endif /* __ASSEMBLY__ */
#endif /* __ASM_SH_FPU_H */
diff --git a/arch/sh/include/asm/hw_breakpoint.h b/arch/sh/include/asm/hw_breakpoint.h
new file mode 100644
index 0000000..965dd78
--- /dev/null
+++ b/arch/sh/include/asm/hw_breakpoint.h
@@ -0,0 +1,67 @@
+#ifndef __ASM_SH_HW_BREAKPOINT_H
+#define __ASM_SH_HW_BREAKPOINT_H
+
+#ifdef __KERNEL__
+#define __ARCH_HW_BREAKPOINT_H
+
+#include <linux/kdebug.h>
+#include <linux/types.h>
+
+struct arch_hw_breakpoint {
+ char *name; /* Contains name of the symbol to set bkpt */
+ unsigned long address;
+ u16 len;
+ u16 type;
+};
+
+enum {
+ SH_BREAKPOINT_READ = (1 << 1),
+ SH_BREAKPOINT_WRITE = (1 << 2),
+ SH_BREAKPOINT_RW = SH_BREAKPOINT_READ | SH_BREAKPOINT_WRITE,
+
+ SH_BREAKPOINT_LEN_1 = (1 << 12),
+ SH_BREAKPOINT_LEN_2 = (1 << 13),
+ SH_BREAKPOINT_LEN_4 = SH_BREAKPOINT_LEN_1 | SH_BREAKPOINT_LEN_2,
+ SH_BREAKPOINT_LEN_8 = (1 << 14),
+};
+
+struct sh_ubc {
+ const char *name;
+ unsigned int num_events;
+ unsigned int trap_nr;
+ void (*enable)(struct arch_hw_breakpoint *, int);
+ void (*disable)(struct arch_hw_breakpoint *, int);
+ void (*enable_all)(unsigned long);
+ void (*disable_all)(void);
+ unsigned long (*active_mask)(void);
+ unsigned long (*triggered_mask)(void);
+ void (*clear_triggered_mask)(unsigned long);
+ struct clk *clk; /* optional interface clock / MSTP bit */
+};
+
+struct perf_event;
+struct task_struct;
+struct pmu;
+
+/* Maximum number of UBC channels */
+#define HBP_NUM 2
+
+/* arch/sh/kernel/hw_breakpoint.c */
+extern int arch_check_va_in_userspace(unsigned long va, u16 hbp_len);
+extern int arch_validate_hwbkpt_settings(struct perf_event *bp,
+ struct task_struct *tsk);
+extern int hw_breakpoint_exceptions_notify(struct notifier_block *unused,
+ unsigned long val, void *data);
+
+int arch_install_hw_breakpoint(struct perf_event *bp);
+void arch_uninstall_hw_breakpoint(struct perf_event *bp);
+void hw_breakpoint_pmu_read(struct perf_event *bp);
+void hw_breakpoint_pmu_unthrottle(struct perf_event *bp);
+
+extern void arch_fill_perf_breakpoint(struct perf_event *bp);
+extern int register_sh_ubc(struct sh_ubc *);
+
+extern struct pmu perf_ops_bp;
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_HW_BREAKPOINT_H */
diff --git a/arch/sh/include/asm/io.h b/arch/sh/include/asm/io.h
index 026dd65..7dab7b23 100644
--- a/arch/sh/include/asm/io.h
+++ b/arch/sh/include/asm/io.h
@@ -22,6 +22,7 @@
* for old compat code for I/O offseting to SuperIOs, all of which are
* better handled through the machvec ioport mapping routines these days.
*/
+#include <linux/errno.h>
#include <asm/cache.h>
#include <asm/system.h>
#include <asm/addrspace.h>
@@ -79,16 +80,51 @@
#define writel(v,a) ({ __raw_writel((v),(a)); mb(); })
#define writeq(v,a) ({ __raw_writeq((v),(a)); mb(); })
-/* SuperH on-chip I/O functions */
-#define ctrl_inb __raw_readb
-#define ctrl_inw __raw_readw
-#define ctrl_inl __raw_readl
-#define ctrl_inq __raw_readq
+/*
+ * Legacy SuperH on-chip I/O functions
+ *
+ * These are all deprecated, all new (and especially cross-platform) code
+ * should be using the __raw_xxx() routines directly.
+ */
+static inline u8 __deprecated ctrl_inb(unsigned long addr)
+{
+ return __raw_readb(addr);
+}
-#define ctrl_outb __raw_writeb
-#define ctrl_outw __raw_writew
-#define ctrl_outl __raw_writel
-#define ctrl_outq __raw_writeq
+static inline u16 __deprecated ctrl_inw(unsigned long addr)
+{
+ return __raw_readw(addr);
+}
+
+static inline u32 __deprecated ctrl_inl(unsigned long addr)
+{
+ return __raw_readl(addr);
+}
+
+static inline u64 __deprecated ctrl_inq(unsigned long addr)
+{
+ return __raw_readq(addr);
+}
+
+static inline void __deprecated ctrl_outb(u8 v, unsigned long addr)
+{
+ __raw_writeb(v, addr);
+}
+
+static inline void __deprecated ctrl_outw(u16 v, unsigned long addr)
+{
+ __raw_writew(v, addr);
+}
+
+static inline void __deprecated ctrl_outl(u32 v, unsigned long addr)
+{
+ __raw_writel(v, addr);
+}
+
+static inline void __deprecated ctrl_outq(u64 v, unsigned long addr)
+{
+ __raw_writeq(v, addr);
+}
extern unsigned long generic_io_base;
@@ -97,6 +133,28 @@
__raw_readw(generic_io_base);
}
+#define __BUILD_UNCACHED_IO(bwlq, type) \
+static inline type read##bwlq##_uncached(unsigned long addr) \
+{ \
+ type ret; \
+ jump_to_uncached(); \
+ ret = __raw_read##bwlq(addr); \
+ back_to_cached(); \
+ return ret; \
+} \
+ \
+static inline void write##bwlq##_uncached(type v, unsigned long addr) \
+{ \
+ jump_to_uncached(); \
+ __raw_write##bwlq(v, addr); \
+ back_to_cached(); \
+}
+
+__BUILD_UNCACHED_IO(b, u8)
+__BUILD_UNCACHED_IO(w, u16)
+__BUILD_UNCACHED_IO(l, u32)
+__BUILD_UNCACHED_IO(q, u64)
+
#define __BUILD_MEMORY_STRING(bwlq, type) \
\
static inline void __raw_writes##bwlq(volatile void __iomem *mem, \
@@ -234,28 +292,21 @@
*/
#ifdef CONFIG_MMU
void __iomem *__ioremap_caller(unsigned long offset, unsigned long size,
- unsigned long flags, void *caller);
+ pgprot_t prot, void *caller);
void __iounmap(void __iomem *addr);
static inline void __iomem *
-__ioremap(unsigned long offset, unsigned long size, unsigned long flags)
+__ioremap(unsigned long offset, unsigned long size, pgprot_t prot)
{
- return __ioremap_caller(offset, size, flags, __builtin_return_address(0));
+ return __ioremap_caller(offset, size, prot, __builtin_return_address(0));
}
static inline void __iomem *
-__ioremap_mode(unsigned long offset, unsigned long size, unsigned long flags)
+__ioremap_29bit(unsigned long offset, unsigned long size, pgprot_t prot)
{
-#if defined(CONFIG_SUPERH32) && !defined(CONFIG_PMB_FIXED) && !defined(CONFIG_PMB)
+#ifdef CONFIG_29BIT
unsigned long last_addr = offset + size - 1;
-#endif
- void __iomem *ret;
- ret = __ioremap_trapped(offset, size);
- if (ret)
- return ret;
-
-#if defined(CONFIG_SUPERH32) && !defined(CONFIG_PMB_FIXED) && !defined(CONFIG_PMB)
/*
* For P1 and P2 space this is trivial, as everything is already
* mapped. Uncached access for P1 addresses are done through P2.
@@ -263,7 +314,7 @@
* mapping must be done by the PMB or by using page tables.
*/
if (likely(PXSEG(offset) < P3SEG && PXSEG(last_addr) < P3SEG)) {
- if (unlikely(flags & _PAGE_CACHABLE))
+ if (unlikely(pgprot_val(prot) & _PAGE_CACHABLE))
return (void __iomem *)P1SEGADDR(offset);
return (void __iomem *)P2SEGADDR(offset);
@@ -274,26 +325,70 @@
return (void __iomem *)P4SEGADDR(offset);
#endif
- return __ioremap(offset, size, flags);
+ return NULL;
+}
+
+static inline void __iomem *
+__ioremap_mode(unsigned long offset, unsigned long size, pgprot_t prot)
+{
+ void __iomem *ret;
+
+ ret = __ioremap_trapped(offset, size);
+ if (ret)
+ return ret;
+
+ ret = __ioremap_29bit(offset, size, prot);
+ if (ret)
+ return ret;
+
+ return __ioremap(offset, size, prot);
}
#else
-#define __ioremap(offset, size, flags) ((void __iomem *)(offset))
-#define __ioremap_mode(offset, size, flags) ((void __iomem *)(offset))
+#define __ioremap(offset, size, prot) ((void __iomem *)(offset))
+#define __ioremap_mode(offset, size, prot) ((void __iomem *)(offset))
#define __iounmap(addr) do { } while (0)
#endif /* CONFIG_MMU */
-#define ioremap(offset, size) \
- __ioremap_mode((offset), (size), 0)
-#define ioremap_nocache(offset, size) \
- __ioremap_mode((offset), (size), 0)
-#define ioremap_cache(offset, size) \
- __ioremap_mode((offset), (size), _PAGE_CACHABLE)
-#define p3_ioremap(offset, size, flags) \
- __ioremap((offset), (size), (flags))
-#define ioremap_prot(offset, size, flags) \
- __ioremap_mode((offset), (size), (flags))
-#define iounmap(addr) \
- __iounmap((addr))
+static inline void __iomem *
+ioremap(unsigned long offset, unsigned long size)
+{
+ return __ioremap_mode(offset, size, PAGE_KERNEL_NOCACHE);
+}
+
+static inline void __iomem *
+ioremap_cache(unsigned long offset, unsigned long size)
+{
+ return __ioremap_mode(offset, size, PAGE_KERNEL);
+}
+
+#ifdef CONFIG_HAVE_IOREMAP_PROT
+static inline void __iomem *
+ioremap_prot(resource_size_t offset, unsigned long size, unsigned long flags)
+{
+ return __ioremap_mode(offset, size, __pgprot(flags));
+}
+#endif
+
+#ifdef CONFIG_IOREMAP_FIXED
+extern void __iomem *ioremap_fixed(resource_size_t, unsigned long,
+ unsigned long, pgprot_t);
+extern int iounmap_fixed(void __iomem *);
+extern void ioremap_fixed_init(void);
+#else
+static inline void __iomem *
+ioremap_fixed(resource_size_t phys_addr, unsigned long offset,
+ unsigned long size, pgprot_t prot)
+{
+ BUG();
+ return NULL;
+}
+
+static inline void ioremap_fixed_init(void) { }
+static inline int iounmap_fixed(void __iomem *addr) { return -EINVAL; }
+#endif
+
+#define ioremap_nocache ioremap
+#define iounmap __iounmap
#define maybebadio(port) \
printk(KERN_ERR "bad PC-like io %s:%u for port 0x%lx at 0x%08x\n", \
diff --git a/arch/sh/include/asm/kdebug.h b/arch/sh/include/asm/kdebug.h
index 985219f..5f6d2e9 100644
--- a/arch/sh/include/asm/kdebug.h
+++ b/arch/sh/include/asm/kdebug.h
@@ -6,6 +6,8 @@
DIE_TRAP,
DIE_NMI,
DIE_OOPS,
+ DIE_BREAKPOINT,
+ DIE_SSTEP,
};
#endif /* __ASM_SH_KDEBUG_H */
diff --git a/arch/sh/include/asm/mmu.h b/arch/sh/include/asm/mmu.h
index c7426ad..15a05b6 100644
--- a/arch/sh/include/asm/mmu.h
+++ b/arch/sh/include/asm/mmu.h
@@ -11,7 +11,9 @@
#define PMB_ADDR 0xf6100000
#define PMB_DATA 0xf7100000
-#define PMB_ENTRY_MAX 16
+
+#define NR_PMB_ENTRIES 16
+
#define PMB_E_MASK 0x0000000f
#define PMB_E_SHIFT 8
@@ -25,11 +27,15 @@
#define PMB_C 0x00000008
#define PMB_WT 0x00000001
#define PMB_UB 0x00000200
+#define PMB_CACHE_MASK (PMB_C | PMB_WT | PMB_UB)
#define PMB_V 0x00000100
#define PMB_NO_ENTRY (-1)
#ifndef __ASSEMBLY__
+#include <linux/errno.h>
+#include <linux/threads.h>
+#include <asm/page.h>
/* Default "unsigned long" context */
typedef unsigned long mm_context_id_t[NR_CPUS];
@@ -47,29 +53,30 @@
#endif
} mm_context_t;
-struct pmb_entry;
-
-struct pmb_entry {
- unsigned long vpn;
- unsigned long ppn;
- unsigned long flags;
-
- /*
- * 0 .. NR_PMB_ENTRIES for specific entry selection, or
- * PMB_NO_ENTRY to search for a free one
- */
- int entry;
-
- struct pmb_entry *next;
- /* Adjacent entry link for contiguous multi-entry mappings */
- struct pmb_entry *link;
-};
-
+#ifdef CONFIG_PMB
/* arch/sh/mm/pmb.c */
long pmb_remap(unsigned long virt, unsigned long phys,
- unsigned long size, unsigned long flags);
+ unsigned long size, pgprot_t prot);
void pmb_unmap(unsigned long addr);
-int pmb_init(void);
+void pmb_init(void);
+bool __in_29bit_mode(void);
+#else
+static inline long pmb_remap(unsigned long virt, unsigned long phys,
+ unsigned long size, pgprot_t prot)
+{
+ return -EINVAL;
+}
+
+#define pmb_unmap(addr) do { } while (0)
+#define pmb_init(addr) do { } while (0)
+
+#ifdef CONFIG_29BIT
+#define __in_29bit_mode() (1)
+#else
+#define __in_29bit_mode() (0)
+#endif
+
+#endif /* CONFIG_PMB */
#endif /* __ASSEMBLY__ */
#endif /* __MMU_H */
diff --git a/arch/sh/include/asm/mmu_context.h b/arch/sh/include/asm/mmu_context.h
index 41080b1..384c747 100644
--- a/arch/sh/include/asm/mmu_context.h
+++ b/arch/sh/include/asm/mmu_context.h
@@ -158,7 +158,7 @@
unsigned int cpu = smp_processor_id();
/* Enable MMU */
- ctrl_outl(MMU_CONTROL_INIT, MMUCR);
+ __raw_writel(MMU_CONTROL_INIT, MMUCR);
ctrl_barrier();
if (asid_cache(cpu) == NO_CONTEXT)
@@ -171,9 +171,9 @@
{
unsigned long cr;
- cr = ctrl_inl(MMUCR);
+ cr = __raw_readl(MMUCR);
cr &= ~MMU_CONTROL_INIT;
- ctrl_outl(cr, MMUCR);
+ __raw_writel(cr, MMUCR);
ctrl_barrier();
}
diff --git a/arch/sh/include/asm/mmu_context_32.h b/arch/sh/include/asm/mmu_context_32.h
index 8ef800c..10e2e17 100644
--- a/arch/sh/include/asm/mmu_context_32.h
+++ b/arch/sh/include/asm/mmu_context_32.h
@@ -49,11 +49,11 @@
/* MMU_TTB is used for optimizing the fault handling. */
static inline void set_TTB(pgd_t *pgd)
{
- ctrl_outl((unsigned long)pgd, MMU_TTB);
+ __raw_writel((unsigned long)pgd, MMU_TTB);
}
static inline pgd_t *get_TTB(void)
{
- return (pgd_t *)ctrl_inl(MMU_TTB);
+ return (pgd_t *)__raw_readl(MMU_TTB);
}
#endif /* __ASM_SH_MMU_CONTEXT_32_H */
diff --git a/arch/sh/include/asm/module.h b/arch/sh/include/asm/module.h
index 068bf16..b7927de 100644
--- a/arch/sh/include/asm/module.h
+++ b/arch/sh/include/asm/module.h
@@ -1,7 +1,22 @@
#ifndef _ASM_SH_MODULE_H
#define _ASM_SH_MODULE_H
-#include <asm-generic/module.h>
+struct mod_arch_specific {
+#ifdef CONFIG_DWARF_UNWINDER
+ struct list_head fde_list;
+ struct list_head cie_list;
+#endif
+};
+
+#ifdef CONFIG_64BIT
+#define Elf_Shdr Elf64_Shdr
+#define Elf_Sym Elf64_Sym
+#define Elf_Ehdr Elf64_Ehdr
+#else
+#define Elf_Shdr Elf32_Shdr
+#define Elf_Sym Elf32_Sym
+#define Elf_Ehdr Elf32_Ehdr
+#endif
#ifdef CONFIG_CPU_LITTLE_ENDIAN
# ifdef CONFIG_CPU_SH2
diff --git a/arch/sh/include/asm/page.h b/arch/sh/include/asm/page.h
index 81bffc0..d71feb3 100644
--- a/arch/sh/include/asm/page.h
+++ b/arch/sh/include/asm/page.h
@@ -45,6 +45,7 @@
#endif
#ifndef __ASSEMBLY__
+#include <asm/uncached.h>
extern unsigned long shm_align_mask;
extern unsigned long max_low_pfn, min_low_pfn;
@@ -56,7 +57,6 @@
return (addr1 ^ addr2) & shm_align_mask;
}
-
#define clear_page(page) memset((void *)(page), 0, PAGE_SIZE)
extern void copy_page(void *to, void *from);
@@ -88,7 +88,7 @@
#define __pte(x) ((pte_t) { (x) } )
#else
typedef struct { unsigned long long pte_low; } pte_t;
-typedef struct { unsigned long pgprot; } pgprot_t;
+typedef struct { unsigned long long pgprot; } pgprot_t;
typedef struct { unsigned long pgd; } pgd_t;
#define pte_val(x) ((x).pte_low)
#define __pte(x) ((pte_t) { (x) } )
@@ -127,12 +127,7 @@
* is not visible (it is part of the PMB mapping) and so needs to be
* added or subtracted as required.
*/
-#if defined(CONFIG_PMB_FIXED)
-/* phys = virt - PAGE_OFFSET - (__MEMORY_START & 0xe0000000) */
-#define PMB_OFFSET (PAGE_OFFSET - PXSEG(__MEMORY_START))
-#define __pa(x) ((unsigned long)(x) - PMB_OFFSET)
-#define __va(x) ((void *)((unsigned long)(x) + PMB_OFFSET))
-#elif defined(CONFIG_32BIT)
+#ifdef CONFIG_PMB
#define __pa(x) ((unsigned long)(x)-PAGE_OFFSET+__MEMORY_START)
#define __va(x) ((void *)((unsigned long)(x)+PAGE_OFFSET-__MEMORY_START))
#else
@@ -140,6 +135,14 @@
#define __va(x) ((void *)((unsigned long)(x)+PAGE_OFFSET))
#endif
+#ifdef CONFIG_UNCACHED_MAPPING
+#define UNCAC_ADDR(addr) ((addr) - PAGE_OFFSET + uncached_start)
+#define CAC_ADDR(addr) ((addr) - uncached_start + PAGE_OFFSET)
+#else
+#define UNCAC_ADDR(addr) ((addr))
+#define CAC_ADDR(addr) ((addr))
+#endif
+
#define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT)
#define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT)
diff --git a/arch/sh/include/asm/pci.h b/arch/sh/include/asm/pci.h
index 67f3999..1042f7f 100644
--- a/arch/sh/include/asm/pci.h
+++ b/arch/sh/include/asm/pci.h
@@ -15,20 +15,49 @@
*/
struct pci_channel {
struct pci_channel *next;
+ struct pci_bus *bus;
struct pci_ops *pci_ops;
- struct resource *io_resource;
- struct resource *mem_resource;
+
+ struct resource *resources;
+ unsigned int nr_resources;
unsigned long io_offset;
unsigned long mem_offset;
unsigned long reg_base;
-
unsigned long io_map_base;
+
+ unsigned int index;
+ unsigned int need_domain_info;
+
+ /* Optional error handling */
+ struct timer_list err_timer, serr_timer;
+ unsigned int err_irq, serr_irq;
};
-extern void register_pci_controller(struct pci_channel *hose);
+/* arch/sh/drivers/pci/pci.c */
+extern int register_pci_controller(struct pci_channel *hose);
+extern void pcibios_report_status(unsigned int status_mask, int warn);
+
+/* arch/sh/drivers/pci/common.c */
+extern int early_read_config_byte(struct pci_channel *hose, int top_bus,
+ int bus, int devfn, int offset, u8 *value);
+extern int early_read_config_word(struct pci_channel *hose, int top_bus,
+ int bus, int devfn, int offset, u16 *value);
+extern int early_read_config_dword(struct pci_channel *hose, int top_bus,
+ int bus, int devfn, int offset, u32 *value);
+extern int early_write_config_byte(struct pci_channel *hose, int top_bus,
+ int bus, int devfn, int offset, u8 value);
+extern int early_write_config_word(struct pci_channel *hose, int top_bus,
+ int bus, int devfn, int offset, u16 value);
+extern int early_write_config_dword(struct pci_channel *hose, int top_bus,
+ int bus, int devfn, int offset, u32 value);
+extern void pcibios_enable_timers(struct pci_channel *hose);
+extern unsigned int pcibios_handle_status_errors(unsigned long addr,
+ unsigned int status, struct pci_channel *hose);
+extern int pci_is_66mhz_capable(struct pci_channel *hose,
+ int top_bus, int current_bus);
extern unsigned long PCIBIOS_MIN_IO, PCIBIOS_MIN_MEM;
@@ -99,20 +128,6 @@
}
#endif
-#ifdef CONFIG_SUPERH32
-/*
- * If we're on an SH7751 or SH7780 PCI controller, PCI memory is mapped
- * at the end of the address space in a special non-translatable area.
- */
-#define PCI_MEM_FIXED_START 0xfd000000
-#define PCI_MEM_FIXED_END (PCI_MEM_FIXED_START + 0x01000000)
-
-#define is_pci_memory_fixed_range(s, e) \
- ((s) >= PCI_MEM_FIXED_START && (e) < PCI_MEM_FIXED_END)
-#else
-#define is_pci_memory_fixed_range(s, e) (0)
-#endif
-
/* Board-specific fixup routines. */
int pcibios_map_platform_irq(struct pci_dev *dev, u8 slot, u8 pin);
@@ -122,6 +137,14 @@
extern void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
struct pci_bus_region *region);
+#define pci_domain_nr(bus) ((struct pci_channel *)(bus)->sysdata)->index
+
+static inline int pci_proc_domain(struct pci_bus *bus)
+{
+ struct pci_channel *hose = bus->sysdata;
+ return hose->need_domain_info;
+}
+
/* Chances are this interrupt is wired PC-style ... */
static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
{
diff --git a/arch/sh/include/asm/pgalloc.h b/arch/sh/include/asm/pgalloc.h
index 63ca37b..8c00785 100644
--- a/arch/sh/include/asm/pgalloc.h
+++ b/arch/sh/include/asm/pgalloc.h
@@ -4,8 +4,16 @@
#include <linux/quicklist.h>
#include <asm/page.h>
-#define QUICK_PGD 0 /* We preserve special mappings over free */
-#define QUICK_PT 1 /* Other page table pages that are zero on free */
+#define QUICK_PT 0 /* Other page table pages that are zero on free */
+
+extern pgd_t *pgd_alloc(struct mm_struct *);
+extern void pgd_free(struct mm_struct *mm, pgd_t *pgd);
+
+#if PAGETABLE_LEVELS > 2
+extern void pud_populate(struct mm_struct *mm, pud_t *pudp, pmd_t *pmd);
+extern pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long address);
+extern void pmd_free(struct mm_struct *mm, pmd_t *pmd);
+#endif
static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd,
pte_t *pte)
@@ -20,28 +28,9 @@
}
#define pmd_pgtable(pmd) pmd_page(pmd)
-static inline void pgd_ctor(void *x)
-{
- pgd_t *pgd = x;
-
- memcpy(pgd + USER_PTRS_PER_PGD,
- swapper_pg_dir + USER_PTRS_PER_PGD,
- (PTRS_PER_PGD - USER_PTRS_PER_PGD) * sizeof(pgd_t));
-}
-
/*
* Allocate and free page tables.
*/
-static inline pgd_t *pgd_alloc(struct mm_struct *mm)
-{
- return quicklist_alloc(QUICK_PGD, GFP_KERNEL | __GFP_REPEAT, pgd_ctor);
-}
-
-static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
-{
- quicklist_free(QUICK_PGD, NULL, pgd);
-}
-
static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
unsigned long address)
{
@@ -81,7 +70,6 @@
static inline void check_pgt_cache(void)
{
- quicklist_trim(QUICK_PGD, NULL, 25, 16);
quicklist_trim(QUICK_PT, NULL, 25, 16);
}
diff --git a/arch/sh/include/asm/pgtable-2level.h b/arch/sh/include/asm/pgtable-2level.h
new file mode 100644
index 0000000..19bd89d
--- /dev/null
+++ b/arch/sh/include/asm/pgtable-2level.h
@@ -0,0 +1,23 @@
+#ifndef __ASM_SH_PGTABLE_2LEVEL_H
+#define __ASM_SH_PGTABLE_2LEVEL_H
+
+#include <asm-generic/pgtable-nopmd.h>
+
+/*
+ * traditional two-level paging structure
+ */
+#define PAGETABLE_LEVELS 2
+
+/* PTE bits */
+#define PTE_MAGNITUDE 2 /* 32-bit PTEs */
+
+#define PTE_SHIFT PAGE_SHIFT
+#define PTE_BITS (PTE_SHIFT - PTE_MAGNITUDE)
+
+/* PGD bits */
+#define PGDIR_SHIFT (PTE_SHIFT + PTE_BITS)
+
+#define PTRS_PER_PGD (PAGE_SIZE / (1 << PTE_MAGNITUDE))
+#define USER_PTRS_PER_PGD (TASK_SIZE/PGDIR_SIZE)
+
+#endif /* __ASM_SH_PGTABLE_2LEVEL_H */
diff --git a/arch/sh/include/asm/pgtable-3level.h b/arch/sh/include/asm/pgtable-3level.h
new file mode 100644
index 0000000..249a985
--- /dev/null
+++ b/arch/sh/include/asm/pgtable-3level.h
@@ -0,0 +1,56 @@
+#ifndef __ASM_SH_PGTABLE_3LEVEL_H
+#define __ASM_SH_PGTABLE_3LEVEL_H
+
+#include <asm-generic/pgtable-nopud.h>
+
+/*
+ * Some cores need a 3-level page table layout, for example when using
+ * 64-bit PTEs and 4K pages.
+ */
+#define PAGETABLE_LEVELS 3
+
+#define PTE_MAGNITUDE 3 /* 64-bit PTEs on SH-X2 TLB */
+
+/* PGD bits */
+#define PGDIR_SHIFT 30
+
+#define PTRS_PER_PGD 4
+#define USER_PTRS_PER_PGD 2
+
+/* PMD bits */
+#define PMD_SHIFT (PAGE_SHIFT + (PAGE_SHIFT - PTE_MAGNITUDE))
+#define PMD_SIZE (1UL << PMD_SHIFT)
+#define PMD_MASK (~(PMD_SIZE-1))
+
+#define PTRS_PER_PMD ((1 << PGDIR_SHIFT) / PMD_SIZE)
+
+#define pmd_ERROR(e) \
+ printk("%s:%d: bad pmd %016llx.\n", __FILE__, __LINE__, pmd_val(e))
+
+typedef struct { unsigned long long pmd; } pmd_t;
+#define pmd_val(x) ((x).pmd)
+#define __pmd(x) ((pmd_t) { (x) } )
+
+static inline unsigned long pud_page_vaddr(pud_t pud)
+{
+ return pud_val(pud);
+}
+
+#define pmd_index(address) (((address) >> PMD_SHIFT) & (PTRS_PER_PMD-1))
+static inline pmd_t *pmd_offset(pud_t *pud, unsigned long address)
+{
+ return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(address);
+}
+
+#define pud_none(x) (!pud_val(x))
+#define pud_present(x) (pud_val(x))
+#define pud_clear(xp) do { set_pud(xp, __pud(0)); } while (0)
+#define pud_bad(x) (pud_val(x) & ~PAGE_MASK)
+
+/*
+ * (puds are folded into pgds so this doesn't get actually called,
+ * but the define is needed for a generic inline function.)
+ */
+#define set_pud(pudptr, pudval) do { *(pudptr) = (pudval); } while(0)
+
+#endif /* __ASM_SH_PGTABLE_3LEVEL_H */
diff --git a/arch/sh/include/asm/pgtable.h b/arch/sh/include/asm/pgtable.h
index ba3046e..aab7652 100644
--- a/arch/sh/include/asm/pgtable.h
+++ b/arch/sh/include/asm/pgtable.h
@@ -12,7 +12,11 @@
#ifndef __ASM_SH_PGTABLE_H
#define __ASM_SH_PGTABLE_H
-#include <asm-generic/pgtable-nopmd.h>
+#ifdef CONFIG_X2TLB
+#include <asm/pgtable-3level.h>
+#else
+#include <asm/pgtable-2level.h>
+#endif
#include <asm/page.h>
#ifndef __ASSEMBLY__
@@ -51,28 +55,12 @@
#define NPHYS_SIGN (1LL << (NPHYS - 1))
#define NPHYS_MASK (-1LL << NPHYS)
-/*
- * traditional two-level paging structure
- */
-/* PTE bits */
-#if defined(CONFIG_X2TLB) || defined(CONFIG_SUPERH64)
-# define PTE_MAGNITUDE 3 /* 64-bit PTEs on extended mode SH-X2 TLB */
-#else
-# define PTE_MAGNITUDE 2 /* 32-bit PTEs */
-#endif
-#define PTE_SHIFT PAGE_SHIFT
-#define PTE_BITS (PTE_SHIFT - PTE_MAGNITUDE)
-
-/* PGD bits */
-#define PGDIR_SHIFT (PTE_SHIFT + PTE_BITS)
#define PGDIR_SIZE (1UL << PGDIR_SHIFT)
#define PGDIR_MASK (~(PGDIR_SIZE-1))
/* Entries per level */
#define PTRS_PER_PTE (PAGE_SIZE / (1 << PTE_MAGNITUDE))
-#define PTRS_PER_PGD (PAGE_SIZE / sizeof(pgd_t))
-#define USER_PTRS_PER_PGD (TASK_SIZE/PGDIR_SIZE)
#define FIRST_USER_ADDRESS 0
#define PHYS_ADDR_MASK29 0x1fffffff
@@ -153,9 +141,9 @@
#define pte_pfn(x) ((unsigned long)(((x).pte_low >> PAGE_SHIFT)))
/*
- * No page table caches to initialise
+ * Initialise the page table caches
*/
-#define pgtable_cache_init() do { } while (0)
+extern void pgtable_cache_init(void);
struct vm_area_struct;
diff --git a/arch/sh/include/asm/pgtable_32.h b/arch/sh/include/asm/pgtable_32.h
index 5003ee8..e172d69 100644
--- a/arch/sh/include/asm/pgtable_32.h
+++ b/arch/sh/include/asm/pgtable_32.h
@@ -71,6 +71,8 @@
#define _PAGE_EXT_KERN_WRITE 0x1000 /* EPR4-bit: Kernel space writable */
#define _PAGE_EXT_KERN_READ 0x2000 /* EPR5-bit: Kernel space readable */
+#define _PAGE_EXT_WIRED 0x4000 /* software: Wire TLB entry */
+
/* Wrapper for extended mode pgprot twiddling */
#define _PAGE_EXT(x) ((unsigned long long)(x) << 32)
@@ -141,12 +143,14 @@
# elif defined(CONFIG_HUGETLB_PAGE_SIZE_64MB)
# define _PAGE_SZHUGE (_PAGE_EXT_ESZ2 | _PAGE_EXT_ESZ3)
# endif
+# define _PAGE_WIRED (_PAGE_EXT(_PAGE_EXT_WIRED))
#else
# if defined(CONFIG_HUGETLB_PAGE_SIZE_64K)
# define _PAGE_SZHUGE (_PAGE_SZ1)
# elif defined(CONFIG_HUGETLB_PAGE_SIZE_1MB)
# define _PAGE_SZHUGE (_PAGE_SZ0 | _PAGE_SZ1)
# endif
+# define _PAGE_WIRED (0)
#endif
/*
diff --git a/arch/sh/include/asm/pgtable_64.h b/arch/sh/include/asm/pgtable_64.h
index 17cdbec..0ee4677 100644
--- a/arch/sh/include/asm/pgtable_64.h
+++ b/arch/sh/include/asm/pgtable_64.h
@@ -43,11 +43,6 @@
}
#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
-static __inline__ void pmd_set(pmd_t *pmdp,pte_t *ptep)
-{
- pmd_val(*pmdp) = (unsigned long) ptep;
-}
-
/*
* PGD defines. Top level.
*/
@@ -128,8 +123,21 @@
#define _PAGE_DIRTY 0x400 /* software: page accessed in write */
#define _PAGE_ACCESSED 0x800 /* software: page referenced */
+/* Wrapper for extended mode pgprot twiddling */
+#define _PAGE_EXT(x) ((unsigned long long)(x) << 32)
+
+/*
+ * We can use the sign-extended bits in the PTEL to get 32 bits of
+ * software flags. This works for now because no implementations uses
+ * anything above the PPN field.
+ */
+#define _PAGE_WIRED _PAGE_EXT(0x001) /* software: wire the tlb entry */
+
+#define _PAGE_CLEAR_FLAGS (_PAGE_PRESENT | _PAGE_FILE | _PAGE_SHARED | \
+ _PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_WIRED)
+
/* Mask which drops software flags */
-#define _PAGE_FLAGS_HARDWARE_MASK 0xfffffffffffff3dbLL
+#define _PAGE_FLAGS_HARDWARE_MASK (NEFF_MASK & ~(_PAGE_CLEAR_FLAGS))
/*
* HugeTLB support
@@ -203,12 +211,6 @@
#define pgprot_writecombine(prot) __pgprot(pgprot_val(prot) & ~_PAGE_CACHABLE)
/*
- * Handling allocation failures during page table setup.
- */
-extern void __handle_bad_pmd_kernel(pmd_t * pmd);
-#define __handle_bad_pmd(x) __handle_bad_pmd_kernel(x)
-
-/*
* PTE level access routines.
*
* Note1:
diff --git a/arch/sh/include/asm/processor.h b/arch/sh/include/asm/processor.h
index 017e0c1..9605e062 100644
--- a/arch/sh/include/asm/processor.h
+++ b/arch/sh/include/asm/processor.h
@@ -98,13 +98,34 @@
/* Forward decl */
struct seq_operations;
+struct task_struct;
extern struct pt_regs fake_swapper_regs;
+/* arch/sh/kernel/process.c */
+extern unsigned int xstate_size;
+extern void free_thread_xstate(struct task_struct *);
+extern struct kmem_cache *task_xstate_cachep;
+
+/* arch/sh/mm/alignment.c */
+extern int get_unalign_ctl(struct task_struct *, unsigned long addr);
+extern int set_unalign_ctl(struct task_struct *, unsigned int val);
+
+#define GET_UNALIGN_CTL(tsk, addr) get_unalign_ctl((tsk), (addr))
+#define SET_UNALIGN_CTL(tsk, val) set_unalign_ctl((tsk), (val))
+
+/* arch/sh/mm/init.c */
+extern unsigned int mem_init_done;
+
/* arch/sh/kernel/setup.c */
const char *get_cpu_subtype(struct sh_cpuinfo *c);
extern const struct seq_operations cpuinfo_op;
+/* thread_struct flags */
+#define SH_THREAD_UAC_NOPRINT (1 << 0)
+#define SH_THREAD_UAC_SIGBUS (1 << 1)
+#define SH_THREAD_UAC_MASK (SH_THREAD_UAC_NOPRINT | SH_THREAD_UAC_SIGBUS)
+
/* processor boot mode configuration */
#define MODE_PIN0 (1 << 0)
#define MODE_PIN1 (1 << 1)
diff --git a/arch/sh/include/asm/processor_32.h b/arch/sh/include/asm/processor_32.h
index 1f3d6fa..572b4eb 100644
--- a/arch/sh/include/asm/processor_32.h
+++ b/arch/sh/include/asm/processor_32.h
@@ -14,6 +14,7 @@
#include <asm/page.h>
#include <asm/types.h>
#include <asm/ptrace.h>
+#include <asm/hw_breakpoint.h>
/*
* Default implementation of macro that returns current
@@ -90,9 +91,9 @@
unsigned long entry_pc;
};
-union sh_fpu_union {
- struct sh_fpu_hard_struct hard;
- struct sh_fpu_soft_struct soft;
+union thread_xstate {
+ struct sh_fpu_hard_struct hardfpu;
+ struct sh_fpu_soft_struct softfpu;
};
struct thread_struct {
@@ -100,38 +101,30 @@
unsigned long sp;
unsigned long pc;
- /* Hardware debugging registers */
- unsigned long ubc_pc;
+ /* Various thread flags, see SH_THREAD_xxx */
+ unsigned long flags;
- /* floating point info */
- union sh_fpu_union fpu;
+ /* Save middle states of ptrace breakpoints */
+ struct perf_event *ptrace_bps[HBP_NUM];
#ifdef CONFIG_SH_DSP
/* Dsp status information */
struct sh_dsp_struct dsp_status;
#endif
-};
-/* Count of active tasks with UBC settings */
-extern int ubc_usercnt;
+ /* Extended processor state */
+ union thread_xstate *xstate;
+};
#define INIT_THREAD { \
.sp = sizeof(init_stack) + (long) &init_stack, \
+ .flags = 0, \
}
-/*
- * Do necessary setup to start up a newly executed thread.
- */
-#define start_thread(_regs, new_pc, new_sp) \
- set_fs(USER_DS); \
- _regs->pr = 0; \
- _regs->sr = SR_FD; /* User mode. */ \
- _regs->pc = new_pc; \
- _regs->regs[15] = new_sp
-
/* Forward declaration, a strange C thing */
struct task_struct;
-struct mm_struct;
+
+extern void start_thread(struct pt_regs *regs, unsigned long new_pc, unsigned long new_sp);
/* Free all resources held by a thread. */
extern void release_thread(struct task_struct *);
diff --git a/arch/sh/include/asm/processor_64.h b/arch/sh/include/asm/processor_64.h
index 5727d31..621bc46 100644
--- a/arch/sh/include/asm/processor_64.h
+++ b/arch/sh/include/asm/processor_64.h
@@ -87,26 +87,31 @@
/* long status; * software status information */
};
-#if 0
/* Dummy fpu emulator */
struct sh_fpu_soft_struct {
- unsigned long long fp_regs[32];
+ unsigned long fp_regs[64];
unsigned int fpscr;
unsigned char lookahead;
unsigned long entry_pc;
};
-#endif
-union sh_fpu_union {
- struct sh_fpu_hard_struct hard;
- /* 'hard' itself only produces 32 bit alignment, yet we need
- to access it using 64 bit load/store as well. */
+union thread_xstate {
+ struct sh_fpu_hard_struct hardfpu;
+ struct sh_fpu_soft_struct softfpu;
+ /*
+ * The structure definitions only produce 32 bit alignment, yet we need
+ * to access them using 64 bit load/store as well.
+ */
unsigned long long alignment_dummy;
};
struct thread_struct {
unsigned long sp;
unsigned long pc;
+
+ /* Various thread flags, see SH_THREAD_xxx */
+ unsigned long flags;
+
/* This stores the address of the pt_regs built during a context
switch, or of the register save area built for a kernel mode
exception. It is used for backtracing the stack of a sleeping task
@@ -122,7 +127,7 @@
/* Hardware debugging registers may come here */
/* floating point info */
- union sh_fpu_union fpu;
+ union thread_xstate *xstate;
};
#define INIT_MMAP \
@@ -137,7 +142,7 @@
.trap_no = 0, \
.error_code = 0, \
.address = 0, \
- .fpu = { { { 0, } }, } \
+ .flags = 0, \
}
/*
diff --git a/arch/sh/include/asm/ptrace.h b/arch/sh/include/asm/ptrace.h
index 1dc12cb..e11b14e 100644
--- a/arch/sh/include/asm/ptrace.h
+++ b/arch/sh/include/asm/ptrace.h
@@ -102,13 +102,15 @@
#define PTRACE_GETDSPREGS 55 /* DSP registers */
#define PTRACE_SETDSPREGS 56
-#define PT_TEXT_END_ADDR 240
-#define PT_TEXT_ADDR 244 /* &(struct user)->start_code */
-#define PT_DATA_ADDR 248 /* &(struct user)->start_data */
+#define PT_TEXT_END_ADDR 240
+#define PT_TEXT_ADDR 244 /* &(struct user)->start_code */
+#define PT_DATA_ADDR 248 /* &(struct user)->start_data */
#define PT_TEXT_LEN 252
#ifdef __KERNEL__
#include <asm/addrspace.h>
+#include <asm/page.h>
+#include <asm/system.h>
#define user_mode(regs) (((regs)->sr & 0x40000000)==0)
#define instruction_pointer(regs) ((unsigned long)(regs)->pc)
@@ -124,6 +126,12 @@
extern void user_enable_single_step(struct task_struct *);
extern void user_disable_single_step(struct task_struct *);
+struct perf_event;
+struct perf_sample_data;
+
+extern void ptrace_triggered(struct perf_event *bp, int nmi,
+ struct perf_sample_data *data, struct pt_regs *regs);
+
#define task_pt_regs(task) \
((struct pt_regs *) (task_stack_page(task) + THREAD_SIZE) - 1)
@@ -131,10 +139,8 @@
{
unsigned long pc = instruction_pointer(regs);
-#ifdef P2SEG
- if (pc >= P2SEG && pc < P3SEG)
- pc -= 0x20000000;
-#endif
+ if (virt_addr_uncached(pc))
+ return CAC_ADDR(pc);
return pc;
}
diff --git a/arch/sh/include/asm/reboot.h b/arch/sh/include/asm/reboot.h
new file mode 100644
index 0000000..b3da0c6
--- /dev/null
+++ b/arch/sh/include/asm/reboot.h
@@ -0,0 +1,21 @@
+#ifndef __ASM_SH_REBOOT_H
+#define __ASM_SH_REBOOT_H
+
+#include <linux/kdebug.h>
+
+struct pt_regs;
+
+struct machine_ops {
+ void (*restart)(char *cmd);
+ void (*halt)(void);
+ void (*power_off)(void);
+ void (*shutdown)(void);
+ void (*crash_shutdown)(struct pt_regs *);
+};
+
+extern struct machine_ops machine_ops;
+
+/* arch/sh/kernel/machine_kexec.c */
+void native_machine_crash_shutdown(struct pt_regs *regs);
+
+#endif /* __ASM_SH_REBOOT_H */
diff --git a/arch/sh/include/asm/setup.h b/arch/sh/include/asm/setup.h
index ce37435..4758325 100644
--- a/arch/sh/include/asm/setup.h
+++ b/arch/sh/include/asm/setup.h
@@ -18,7 +18,6 @@
/* ... */
#define COMMAND_LINE ((char *) (PARAM+0x100))
-int setup_early_printk(char *);
void sh_mv_setup(void);
#endif /* __KERNEL__ */
diff --git a/arch/sh/include/asm/sh_bios.h b/arch/sh/include/asm/sh_bios.h
index d9c96d7..95714c2 100644
--- a/arch/sh/include/asm/sh_bios.h
+++ b/arch/sh/include/asm/sh_bios.h
@@ -1,18 +1,27 @@
#ifndef __ASM_SH_BIOS_H
#define __ASM_SH_BIOS_H
+#ifdef CONFIG_SH_STANDARD_BIOS
+
/*
* Copyright (C) 2000 Greg Banks, Mitch Davis
* C API to interface to the standard LinuxSH BIOS
* usually from within the early stages of kernel boot.
*/
-
-
extern void sh_bios_console_write(const char *buf, unsigned int len);
-extern void sh_bios_char_out(char ch);
extern void sh_bios_gdb_detach(void);
extern void sh_bios_get_node_addr(unsigned char *node_addr);
extern void sh_bios_shutdown(unsigned int how);
+extern void sh_bios_vbr_init(void);
+extern void sh_bios_vbr_reload(void);
+
+#else
+
+static inline void sh_bios_vbr_init(void) { }
+static inline void sh_bios_vbr_reload(void) { }
+
+#endif /* CONFIG_SH_STANDARD_BIOS */
+
#endif /* __ASM_SH_BIOS_H */
diff --git a/arch/sh/include/asm/suspend.h b/arch/sh/include/asm/suspend.h
index fe9c2a1..64eb41a 100644
--- a/arch/sh/include/asm/suspend.h
+++ b/arch/sh/include/asm/suspend.h
@@ -92,5 +92,6 @@
#define SUSP_SH_USTANDBY (1 << 3) /* SH-Mobile U-standby mode */
#define SUSP_SH_SF (1 << 4) /* Enable self-refresh */
#define SUSP_SH_MMU (1 << 5) /* Save/restore MMU and cache */
+#define SUSP_SH_REGS (1 << 6) /* Save/restore registers */
#endif /* _ASM_SH_SUSPEND_H */
diff --git a/arch/sh/include/asm/system.h b/arch/sh/include/asm/system.h
index c15415b..0bd7a17 100644
--- a/arch/sh/include/asm/system.h
+++ b/arch/sh/include/asm/system.h
@@ -10,7 +10,6 @@
#include <linux/compiler.h>
#include <linux/linkage.h>
#include <asm/types.h>
-#include <asm/ptrace.h>
#define AT_VECTOR_SIZE_ARCH 5 /* entries in ARCH_DLINFO */
@@ -32,7 +31,7 @@
#define mb() __asm__ __volatile__ ("synco": : :"memory")
#define rmb() mb()
#define wmb() __asm__ __volatile__ ("synco": : :"memory")
-#define ctrl_barrier() __icbi(0xa8000000)
+#define ctrl_barrier() __icbi(PAGE_OFFSET)
#define read_barrier_depends() do { } while(0)
#else
#define mb() __asm__ __volatile__ ("": : :"memory")
@@ -114,6 +113,8 @@
(unsigned long)_n_, sizeof(*(ptr))); \
})
+struct pt_regs;
+
extern void die(const char *str, struct pt_regs *regs, long err) __attribute__ ((noreturn));
void free_initmem(void);
void free_initrd_mem(unsigned long start, unsigned long end);
@@ -137,14 +138,14 @@
#endif
extern unsigned long cached_to_uncached;
+extern unsigned long uncached_size;
extern struct dentry *sh_debugfs_root;
void per_cpu_trap_init(void);
void default_idle(void);
void cpu_idle_wait(void);
-
-asmlinkage void break_point_trap(void);
+void stop_this_cpu(void *);
#ifdef CONFIG_SUPERH32
#define BUILD_TRAP_HANDLER(name) \
diff --git a/arch/sh/include/asm/system_32.h b/arch/sh/include/asm/system_32.h
index 06814f5..51296b3 100644
--- a/arch/sh/include/asm/system_32.h
+++ b/arch/sh/include/asm/system_32.h
@@ -2,6 +2,7 @@
#define __ASM_SH_SYSTEM_32_H
#include <linux/types.h>
+#include <asm/mmu.h>
#ifdef CONFIG_SH_DSP
@@ -144,9 +145,6 @@
__restore_dsp(prev); \
} while (0)
-#define __uses_jump_to_uncached \
- noinline __attribute__ ((__section__ (".uncached.text")))
-
/*
* Jump to uncached area.
* When handling TLB or caches, we need to do it from an uncached area.
@@ -216,6 +214,17 @@
int handle_unaligned_access(insn_size_t instruction, struct pt_regs *regs,
struct mem_access *ma, int);
+static inline void trigger_address_error(void)
+{
+ if (__in_29bit_mode())
+ __asm__ __volatile__ (
+ "ldc %0, sr\n\t"
+ "mov.l @%1, %0"
+ :
+ : "r" (0x10000000), "r" (0x80000001)
+ );
+}
+
asmlinkage void do_address_error(struct pt_regs *regs,
unsigned long writeaccess,
unsigned long address);
diff --git a/arch/sh/include/asm/system_64.h b/arch/sh/include/asm/system_64.h
index ab1dd91..3633864 100644
--- a/arch/sh/include/asm/system_64.h
+++ b/arch/sh/include/asm/system_64.h
@@ -18,6 +18,7 @@
/*
* switch_to() should switch tasks to task nr n, first
*/
+struct thread_struct;
struct task_struct *sh64_switch_to(struct task_struct *prev,
struct thread_struct *prev_thread,
struct task_struct *next,
@@ -33,8 +34,6 @@
&next->thread); \
} while (0)
-#define __uses_jump_to_uncached
-
#define jump_to_uncached() do { } while (0)
#define back_to_cached() do { } while (0)
@@ -48,6 +47,13 @@
return (unsigned long long)(signed long long)(signed long)val;
}
+extern void phys_stext(void);
+
+static inline void trigger_address_error(void)
+{
+ phys_stext();
+}
+
#define SR_BL_LL 0x0000000010000000LL
static inline void set_bl_bit(void)
diff --git a/arch/sh/include/asm/thread_info.h b/arch/sh/include/asm/thread_info.h
index 1f3d927..55a36fe 100644
--- a/arch/sh/include/asm/thread_info.h
+++ b/arch/sh/include/asm/thread_info.h
@@ -93,14 +93,16 @@
#define THREAD_SIZE_ORDER (THREAD_SHIFT - PAGE_SHIFT)
-#else /* THREAD_SHIFT < PAGE_SHIFT */
-
-#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
+#endif
extern struct thread_info *alloc_thread_info(struct task_struct *tsk);
extern void free_thread_info(struct thread_info *ti);
+extern void arch_task_cache_init(void);
+#define arch_task_cache_init arch_task_cache_init
+extern int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src);
+extern void init_thread_xstate(void);
-#endif /* THREAD_SHIFT < PAGE_SHIFT */
+#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
#endif /* __ASSEMBLY__ */
diff --git a/arch/sh/include/asm/tlb.h b/arch/sh/include/asm/tlb.h
index da8fe7a..75abb38 100644
--- a/arch/sh/include/asm/tlb.h
+++ b/arch/sh/include/asm/tlb.h
@@ -11,6 +11,7 @@
#ifdef CONFIG_MMU
#include <asm/pgalloc.h>
#include <asm/tlbflush.h>
+#include <asm/mmu_context.h>
/*
* TLB handling. This allows us to remove pages from the page
@@ -97,6 +98,22 @@
#define tlb_migrate_finish(mm) do { } while (0)
+#if defined(CONFIG_CPU_SH4) || defined(CONFIG_SUPERH64)
+extern void tlb_wire_entry(struct vm_area_struct *, unsigned long, pte_t);
+extern void tlb_unwire_entry(void);
+#else
+static inline void tlb_wire_entry(struct vm_area_struct *vma ,
+ unsigned long addr, pte_t pte)
+{
+ BUG();
+}
+
+static inline void tlb_unwire_entry(void)
+{
+ BUG();
+}
+#endif
+
#else /* CONFIG_MMU */
#define tlb_start_vma(tlb, vma) do { } while (0)
diff --git a/arch/sh/include/asm/ubc.h b/arch/sh/include/asm/ubc.h
deleted file mode 100644
index 9bf9616..0000000
--- a/arch/sh/include/asm/ubc.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * include/asm-sh/ubc.h
- *
- * Copyright (C) 1999 Niibe Yutaka
- * Copyright (C) 2002, 2003 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_SH_UBC_H
-#define __ASM_SH_UBC_H
-#ifdef __KERNEL__
-
-#include <cpu/ubc.h>
-
-/* User Break Controller */
-#if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709)
-#define UBC_TYPE_SH7729 (current_cpu_data.type == CPU_SH7729)
-#else
-#define UBC_TYPE_SH7729 0
-#endif
-
-#define BAMR_ASID (1 << 2)
-#define BAMR_NONE 0
-#define BAMR_10 0x1
-#define BAMR_12 0x2
-#define BAMR_ALL 0x3
-#define BAMR_16 0x8
-#define BAMR_20 0x9
-
-#define BBR_INST (1 << 4)
-#define BBR_DATA (2 << 4)
-#define BBR_READ (1 << 2)
-#define BBR_WRITE (2 << 2)
-#define BBR_BYTE 0x1
-#define BBR_HALF 0x2
-#define BBR_LONG 0x3
-#define BBR_QUAD (1 << 6) /* SH7750 */
-#define BBR_CPU (1 << 6) /* SH7709A,SH7729 */
-#define BBR_DMA (2 << 6) /* SH7709A,SH7729 */
-
-#define BRCR_CMFA (1 << 15)
-#define BRCR_CMFB (1 << 14)
-
-#if defined CONFIG_CPU_SH2A
-#define BRCR_CMFCA (1 << 15)
-#define BRCR_CMFCB (1 << 14)
-#define BRCR_CMFDA (1 << 13)
-#define BRCR_CMFDB (1 << 12)
-#define BRCR_PCBB (1 << 6) /* 1: after execution */
-#define BRCR_PCBA (1 << 5) /* 1: after execution */
-#define BRCR_PCTE 0
-#else
-#define BRCR_PCTE (1 << 11)
-#define BRCR_PCBA (1 << 10) /* 1: after execution */
-#define BRCR_DBEB (1 << 7)
-#define BRCR_PCBB (1 << 6)
-#define BRCR_SEQ (1 << 3)
-#define BRCR_UBDE (1 << 0)
-#endif
-
-#endif /* __KERNEL__ */
-#endif /* __ASM_SH_UBC_H */
diff --git a/arch/sh/include/asm/uncached.h b/arch/sh/include/asm/uncached.h
new file mode 100644
index 0000000..e3419f9
--- /dev/null
+++ b/arch/sh/include/asm/uncached.h
@@ -0,0 +1,18 @@
+#ifndef __ASM_SH_UNCACHED_H
+#define __ASM_SH_UNCACHED_H
+
+#include <linux/bug.h>
+
+#ifdef CONFIG_UNCACHED_MAPPING
+extern unsigned long uncached_start, uncached_end;
+
+extern int virt_addr_uncached(unsigned long kaddr);
+extern void uncached_init(void);
+extern void uncached_resize(unsigned long size);
+#else
+#define virt_addr_uncached(kaddr) (0)
+#define uncached_init() do { } while (0)
+#define uncached_resize(size) BUG()
+#endif
+
+#endif /* __ASM_SH_UNCACHED_H */
diff --git a/arch/sh/include/asm/vmlinux.lds.h b/arch/sh/include/asm/vmlinux.lds.h
index 244ec4a..d58ad49 100644
--- a/arch/sh/include/asm/vmlinux.lds.h
+++ b/arch/sh/include/asm/vmlinux.lds.h
@@ -14,4 +14,12 @@
#define DWARF_EH_FRAME
#endif
+#ifdef CONFIG_SUPERH64
+#define EXTRA_TEXT \
+ *(.text64) \
+ *(.text..SHmedia32)
+#else
+#define EXTRA_TEXT
+#endif
+
#endif /* __ASM_SH_VMLINUX_LDS_H */
diff --git a/arch/sh/include/asm/watchdog.h b/arch/sh/include/asm/watchdog.h
index 19dfff5..85a7aca 100644
--- a/arch/sh/include/asm/watchdog.h
+++ b/arch/sh/include/asm/watchdog.h
@@ -70,7 +70,7 @@
*/
static inline __u32 sh_wdt_read_cnt(void)
{
- return ctrl_inl(WTCNT_R);
+ return __raw_readl(WTCNT_R);
}
/**
@@ -82,7 +82,7 @@
*/
static inline void sh_wdt_write_cnt(__u32 val)
{
- ctrl_outl((WTCNT_HIGH << 24) | (__u32)val, WTCNT);
+ __raw_writel((WTCNT_HIGH << 24) | (__u32)val, WTCNT);
}
/**
@@ -94,7 +94,7 @@
*/
static inline void sh_wdt_write_bst(__u32 val)
{
- ctrl_outl((WTBST_HIGH << 24) | (__u32)val, WTBST);
+ __raw_writel((WTBST_HIGH << 24) | (__u32)val, WTBST);
}
/**
* sh_wdt_read_csr - Read from Control/Status Register
@@ -103,7 +103,7 @@
*/
static inline __u32 sh_wdt_read_csr(void)
{
- return ctrl_inl(WTCSR_R);
+ return __raw_readl(WTCSR_R);
}
/**
@@ -115,7 +115,7 @@
*/
static inline void sh_wdt_write_csr(__u32 val)
{
- ctrl_outl((WTCSR_HIGH << 24) | (__u32)val, WTCSR);
+ __raw_writel((WTCSR_HIGH << 24) | (__u32)val, WTCSR);
}
#else
/**
@@ -124,7 +124,7 @@
*/
static inline __u8 sh_wdt_read_cnt(void)
{
- return ctrl_inb(WTCNT_R);
+ return __raw_readb(WTCNT_R);
}
/**
@@ -136,7 +136,7 @@
*/
static inline void sh_wdt_write_cnt(__u8 val)
{
- ctrl_outw((WTCNT_HIGH << 8) | (__u16)val, WTCNT);
+ __raw_writew((WTCNT_HIGH << 8) | (__u16)val, WTCNT);
}
/**
@@ -146,7 +146,7 @@
*/
static inline __u8 sh_wdt_read_csr(void)
{
- return ctrl_inb(WTCSR_R);
+ return __raw_readb(WTCSR_R);
}
/**
@@ -158,7 +158,7 @@
*/
static inline void sh_wdt_write_csr(__u8 val)
{
- ctrl_outw((WTCSR_HIGH << 8) | (__u16)val, WTCSR);
+ __raw_writew((WTCSR_HIGH << 8) | (__u16)val, WTCSR);
}
#endif /* CONFIG_CPU_SUBTYPE_SH7785 || CONFIG_CPU_SUBTYPE_SH7780 */
#endif /* __KERNEL__ */
diff --git a/arch/sh/include/cpu-sh2/cpu/ubc.h b/arch/sh/include/cpu-sh2/cpu/ubc.h
deleted file mode 100644
index ba0e87f..0000000
--- a/arch/sh/include/cpu-sh2/cpu/ubc.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * include/asm-sh/cpu-sh2/ubc.h
- *
- * Copyright (C) 2003 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_CPU_SH2_UBC_H
-#define __ASM_CPU_SH2_UBC_H
-
-#define UBC_BARA 0xffffff40
-#define UBC_BAMRA 0xffffff44
-#define UBC_BBRA 0xffffff48
-#define UBC_BARB 0xffffff60
-#define UBC_BAMRB 0xffffff64
-#define UBC_BBRB 0xffffff68
-#define UBC_BDRB 0xffffff70
-#define UBC_BDMRB 0xffffff74
-#define UBC_BRCR 0xffffff78
-
-/*
- * We don't have any ASID changes to make in the UBC on the SH-2.
- *
- * Make these purposely invalid to track misuse.
- */
-#define UBC_BASRA 0x00000000
-#define UBC_BASRB 0x00000000
-
-#endif /* __ASM_CPU_SH2_UBC_H */
-
diff --git a/arch/sh/include/cpu-sh2/cpu/watchdog.h b/arch/sh/include/cpu-sh2/cpu/watchdog.h
index 393161c..1eab8aa 100644
--- a/arch/sh/include/cpu-sh2/cpu/watchdog.h
+++ b/arch/sh/include/cpu-sh2/cpu/watchdog.h
@@ -44,7 +44,7 @@
/*
* Same read/write brain-damage as for WTCNT here..
*/
- return ctrl_inb(RSTCSR_R);
+ return __raw_readb(RSTCSR_R);
}
/**
@@ -62,7 +62,7 @@
* we can't presently touch the WOVF bit, since the upper byte
* has to be swapped for this. So just leave it alone..
*/
- ctrl_outw((WTCNT_HIGH << 8) | (__u16)val, RSTCSR);
+ __raw_writeb((WTCNT_HIGH << 8) | (__u16)val, RSTCSR);
}
#endif /* __ASM_CPU_SH2_WATCHDOG_H */
diff --git a/arch/sh/include/cpu-sh3/cpu/dac.h b/arch/sh/include/cpu-sh3/cpu/dac.h
index 05fda83..98f1d15 100644
--- a/arch/sh/include/cpu-sh3/cpu/dac.h
+++ b/arch/sh/include/cpu-sh3/cpu/dac.h
@@ -17,25 +17,25 @@
static __inline__ void sh_dac_enable(int channel)
{
unsigned char v;
- v = ctrl_inb(DACR);
+ v = __raw_readb(DACR);
if(channel) v |= DACR_DAOE1;
else v |= DACR_DAOE0;
- ctrl_outb(v,DACR);
+ __raw_writeb(v,DACR);
}
static __inline__ void sh_dac_disable(int channel)
{
unsigned char v;
- v = ctrl_inb(DACR);
+ v = __raw_readb(DACR);
if(channel) v &= ~DACR_DAOE1;
else v &= ~DACR_DAOE0;
- ctrl_outb(v,DACR);
+ __raw_writeb(v,DACR);
}
static __inline__ void sh_dac_output(u8 value, int channel)
{
- if(channel) ctrl_outb(value,DADR1);
- else ctrl_outb(value,DADR0);
+ if(channel) __raw_writeb(value,DADR1);
+ else __raw_writeb(value,DADR0);
}
#endif /* __ASM_CPU_SH3_DAC_H */
diff --git a/arch/sh/include/cpu-sh3/cpu/dma.h b/arch/sh/include/cpu-sh3/cpu/dma.h
index 0ea15f3..207811a 100644
--- a/arch/sh/include/cpu-sh3/cpu/dma.h
+++ b/arch/sh/include/cpu-sh3/cpu/dma.h
@@ -20,8 +20,10 @@
#define TS_32 0x00000010
#define TS_128 0x00000018
-#define CHCR_TS_MASK 0x18
-#define CHCR_TS_SHIFT 3
+#define CHCR_TS_LOW_MASK 0x18
+#define CHCR_TS_LOW_SHIFT 3
+#define CHCR_TS_HIGH_MASK 0
+#define CHCR_TS_HIGH_SHIFT 0
#define DMAOR_INIT DMAOR_DME
@@ -36,11 +38,13 @@
XMIT_SZ_128BIT,
};
-static unsigned int ts_shift[] __maybe_unused = {
- [XMIT_SZ_8BIT] = 0,
- [XMIT_SZ_16BIT] = 1,
- [XMIT_SZ_32BIT] = 2,
- [XMIT_SZ_128BIT] = 4,
-};
+#define TS_SHIFT { \
+ [XMIT_SZ_8BIT] = 0, \
+ [XMIT_SZ_16BIT] = 1, \
+ [XMIT_SZ_32BIT] = 2, \
+ [XMIT_SZ_128BIT] = 4, \
+}
+
+#define TS_INDEX2VAL(i) (((i) & 3) << CHCR_TS_LOW_SHIFT)
#endif /* __ASM_CPU_SH3_DMA_H */
diff --git a/arch/sh/include/cpu-sh3/cpu/ubc.h b/arch/sh/include/cpu-sh3/cpu/ubc.h
deleted file mode 100644
index 4e6381d..0000000
--- a/arch/sh/include/cpu-sh3/cpu/ubc.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * include/asm-sh/cpu-sh3/ubc.h
- *
- * Copyright (C) 1999 Niibe Yutaka
- * Copyright (C) 2003 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_CPU_SH3_UBC_H
-#define __ASM_CPU_SH3_UBC_H
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7710) || \
- defined(CONFIG_CPU_SUBTYPE_SH7720) || \
- defined(CONFIG_CPU_SUBTYPE_SH7721)
-#define UBC_BARA 0xa4ffffb0
-#define UBC_BAMRA 0xa4ffffb4
-#define UBC_BBRA 0xa4ffffb8
-#define UBC_BASRA 0xffffffe4
-#define UBC_BARB 0xa4ffffa0
-#define UBC_BAMRB 0xa4ffffa4
-#define UBC_BBRB 0xa4ffffa8
-#define UBC_BASRB 0xffffffe8
-#define UBC_BDRB 0xa4ffff90
-#define UBC_BDMRB 0xa4ffff94
-#define UBC_BRCR 0xa4ffff98
-#else
-#define UBC_BARA 0xffffffb0
-#define UBC_BAMRA 0xffffffb4
-#define UBC_BBRA 0xffffffb8
-#define UBC_BASRA 0xffffffe4
-#define UBC_BARB 0xffffffa0
-#define UBC_BAMRB 0xffffffa4
-#define UBC_BBRB 0xffffffa8
-#define UBC_BASRB 0xffffffe8
-#define UBC_BDRB 0xffffff90
-#define UBC_BDMRB 0xffffff94
-#define UBC_BRCR 0xffffff98
-#endif
-
-#endif /* __ASM_CPU_SH3_UBC_H */
diff --git a/arch/sh/include/cpu-sh4/cpu/addrspace.h b/arch/sh/include/cpu-sh4/cpu/addrspace.h
index a3fa733..d51da25 100644
--- a/arch/sh/include/cpu-sh4/cpu/addrspace.h
+++ b/arch/sh/include/cpu-sh4/cpu/addrspace.h
@@ -28,6 +28,15 @@
#define P4SEG_TLB_DATA 0xf7000000
#define P4SEG_REG_BASE 0xff000000
+#define PA_AREA0 0x00000000
+#define PA_AREA1 0x04000000
+#define PA_AREA2 0x08000000
+#define PA_AREA3 0x0c000000
+#define PA_AREA4 0x10000000
+#define PA_AREA5 0x14000000
+#define PA_AREA6 0x18000000
+#define PA_AREA7 0x1c000000
+
#define PA_AREA5_IO 0xb4000000 /* Area 5 IO Memory */
#define PA_AREA6_IO 0xb8000000 /* Area 6 IO Memory */
diff --git a/arch/sh/include/cpu-sh4/cpu/dma-sh4a.h b/arch/sh/include/cpu-sh4/cpu/dma-sh4a.h
index c4ed660..e734ea4 100644
--- a/arch/sh/include/cpu-sh4/cpu/dma-sh4a.h
+++ b/arch/sh/include/cpu-sh4/cpu/dma-sh4a.h
@@ -2,22 +2,38 @@
#define __ASM_SH_CPU_SH4_DMA_SH7780_H
#if defined(CONFIG_CPU_SUBTYPE_SH7343) || \
- defined(CONFIG_CPU_SUBTYPE_SH7722) || \
defined(CONFIG_CPU_SUBTYPE_SH7730)
#define DMTE0_IRQ 48
#define DMTE4_IRQ 76
#define DMAE0_IRQ 78 /* DMA Error IRQ*/
#define SH_DMAC_BASE0 0xFE008020
-#define SH_DMARS_BASE 0xFE009000
+#define SH_DMARS_BASE0 0xFE009000
+#define CHCR_TS_LOW_MASK 0x00000018
+#define CHCR_TS_LOW_SHIFT 3
+#define CHCR_TS_HIGH_MASK 0
+#define CHCR_TS_HIGH_SHIFT 0
+#elif defined(CONFIG_CPU_SUBTYPE_SH7722)
+#define DMTE0_IRQ 48
+#define DMTE4_IRQ 76
+#define DMAE0_IRQ 78 /* DMA Error IRQ*/
+#define SH_DMAC_BASE0 0xFE008020
+#define SH_DMARS_BASE0 0xFE009000
+#define CHCR_TS_LOW_MASK 0x00000018
+#define CHCR_TS_LOW_SHIFT 3
+#define CHCR_TS_HIGH_MASK 0x00300000
+#define CHCR_TS_HIGH_SHIFT 20
#elif defined(CONFIG_CPU_SUBTYPE_SH7763) || \
defined(CONFIG_CPU_SUBTYPE_SH7764)
#define DMTE0_IRQ 34
#define DMTE4_IRQ 44
#define DMAE0_IRQ 38
#define SH_DMAC_BASE0 0xFF608020
-#define SH_DMARS_BASE 0xFF609000
-#elif defined(CONFIG_CPU_SUBTYPE_SH7723) || \
- defined(CONFIG_CPU_SUBTYPE_SH7724)
+#define SH_DMARS_BASE0 0xFF609000
+#define CHCR_TS_LOW_MASK 0x00000018
+#define CHCR_TS_LOW_SHIFT 3
+#define CHCR_TS_HIGH_MASK 0
+#define CHCR_TS_HIGH_SHIFT 0
+#elif defined(CONFIG_CPU_SUBTYPE_SH7723)
#define DMTE0_IRQ 48 /* DMAC0A*/
#define DMTE4_IRQ 76 /* DMAC0B */
#define DMTE6_IRQ 40
@@ -29,7 +45,29 @@
#define DMAE1_IRQ 74 /* DMA Error IRQ*/
#define SH_DMAC_BASE0 0xFE008020
#define SH_DMAC_BASE1 0xFDC08020
-#define SH_DMARS_BASE 0xFDC09000
+#define SH_DMARS_BASE0 0xFDC09000
+#define CHCR_TS_LOW_MASK 0x00000018
+#define CHCR_TS_LOW_SHIFT 3
+#define CHCR_TS_HIGH_MASK 0
+#define CHCR_TS_HIGH_SHIFT 0
+#elif defined(CONFIG_CPU_SUBTYPE_SH7724)
+#define DMTE0_IRQ 48 /* DMAC0A*/
+#define DMTE4_IRQ 76 /* DMAC0B */
+#define DMTE6_IRQ 40
+#define DMTE8_IRQ 42 /* DMAC1A */
+#define DMTE9_IRQ 43
+#define DMTE10_IRQ 72 /* DMAC1B */
+#define DMTE11_IRQ 73
+#define DMAE0_IRQ 78 /* DMA Error IRQ*/
+#define DMAE1_IRQ 74 /* DMA Error IRQ*/
+#define SH_DMAC_BASE0 0xFE008020
+#define SH_DMAC_BASE1 0xFDC08020
+#define SH_DMARS_BASE0 0xFE009000
+#define SH_DMARS_BASE1 0xFDC09000
+#define CHCR_TS_LOW_MASK 0x00000018
+#define CHCR_TS_LOW_SHIFT 3
+#define CHCR_TS_HIGH_MASK 0x00600000
+#define CHCR_TS_HIGH_SHIFT 21
#elif defined(CONFIG_CPU_SUBTYPE_SH7780)
#define DMTE0_IRQ 34
#define DMTE4_IRQ 44
@@ -41,7 +79,11 @@
#define DMAE0_IRQ 38 /* DMA Error IRQ */
#define SH_DMAC_BASE0 0xFC808020
#define SH_DMAC_BASE1 0xFC818020
-#define SH_DMARS_BASE 0xFC809000
+#define SH_DMARS_BASE0 0xFC809000
+#define CHCR_TS_LOW_MASK 0x00000018
+#define CHCR_TS_LOW_SHIFT 3
+#define CHCR_TS_HIGH_MASK 0
+#define CHCR_TS_HIGH_SHIFT 0
#else /* SH7785 */
#define DMTE0_IRQ 33
#define DMTE4_IRQ 37
@@ -54,18 +96,17 @@
#define DMAE1_IRQ 58 /* DMA Error IRQ1 */
#define SH_DMAC_BASE0 0xFC808020
#define SH_DMAC_BASE1 0xFCC08020
-#define SH_DMARS_BASE 0xFC809000
+#define SH_DMARS_BASE0 0xFC809000
+#define CHCR_TS_LOW_MASK 0x00000018
+#define CHCR_TS_LOW_SHIFT 3
+#define CHCR_TS_HIGH_MASK 0
+#define CHCR_TS_HIGH_SHIFT 0
#endif
-#define REQ_HE 0x000000C0
-#define REQ_H 0x00000080
-#define REQ_LE 0x00000040
-#define TM_BURST 0x0000020
-#define TS_8 0x00000000
-#define TS_16 0x00000008
-#define TS_32 0x00000010
-#define TS_16BLK 0x00000018
-#define TS_32BLK 0x00100000
+#define REQ_HE 0x000000C0
+#define REQ_H 0x00000080
+#define REQ_LE 0x00000040
+#define TM_BURST 0x00000020
/*
* The SuperH DMAC supports a number of transmit sizes, we list them here,
@@ -74,22 +115,31 @@
* Defaults to a 64-bit transfer size.
*/
enum {
- XMIT_SZ_8BIT,
- XMIT_SZ_16BIT,
- XMIT_SZ_32BIT,
- XMIT_SZ_128BIT,
- XMIT_SZ_256BIT,
+ XMIT_SZ_8BIT = 0,
+ XMIT_SZ_16BIT = 1,
+ XMIT_SZ_32BIT = 2,
+ XMIT_SZ_64BIT = 7,
+ XMIT_SZ_128BIT = 3,
+ XMIT_SZ_256BIT = 4,
+ XMIT_SZ_128BIT_BLK = 0xb,
+ XMIT_SZ_256BIT_BLK = 0xc,
};
/*
* The DMA count is defined as the number of bytes to transfer.
*/
-static unsigned int ts_shift[] __maybe_unused = {
- [XMIT_SZ_8BIT] = 0,
- [XMIT_SZ_16BIT] = 1,
- [XMIT_SZ_32BIT] = 2,
- [XMIT_SZ_128BIT] = 4,
- [XMIT_SZ_256BIT] = 5,
-};
+#define TS_SHIFT { \
+ [XMIT_SZ_8BIT] = 0, \
+ [XMIT_SZ_16BIT] = 1, \
+ [XMIT_SZ_32BIT] = 2, \
+ [XMIT_SZ_64BIT] = 3, \
+ [XMIT_SZ_128BIT] = 4, \
+ [XMIT_SZ_256BIT] = 5, \
+ [XMIT_SZ_128BIT_BLK] = 4, \
+ [XMIT_SZ_256BIT_BLK] = 5, \
+}
+
+#define TS_INDEX2VAL(i) ((((i) & 3) << CHCR_TS_LOW_SHIFT) | \
+ ((((i) >> 2) & 3) << CHCR_TS_HIGH_SHIFT))
#endif /* __ASM_SH_CPU_SH4_DMA_SH7780_H */
diff --git a/arch/sh/include/cpu-sh4/cpu/dma.h b/arch/sh/include/cpu-sh4/cpu/dma.h
index bcb3024..114a369 100644
--- a/arch/sh/include/cpu-sh4/cpu/dma.h
+++ b/arch/sh/include/cpu-sh4/cpu/dma.h
@@ -6,8 +6,6 @@
#ifdef CONFIG_CPU_SH4A
#define DMAOR_INIT (DMAOR_DME)
-#define CHCR_TS_MASK 0x18
-#define CHCR_TS_SHIFT 3
#include <cpu/dma-sh4a.h>
#else /* CONFIG_CPU_SH4A */
@@ -29,8 +27,10 @@
#define TS_32 0x00000030
#define TS_64 0x00000000
-#define CHCR_TS_MASK 0x70
-#define CHCR_TS_SHIFT 4
+#define CHCR_TS_LOW_MASK 0x70
+#define CHCR_TS_LOW_SHIFT 4
+#define CHCR_TS_HIGH_MASK 0
+#define CHCR_TS_HIGH_SHIFT 0
#define DMAOR_COD 0x00000008
@@ -41,23 +41,26 @@
* Defaults to a 64-bit transfer size.
*/
enum {
- XMIT_SZ_64BIT,
- XMIT_SZ_8BIT,
- XMIT_SZ_16BIT,
- XMIT_SZ_32BIT,
- XMIT_SZ_256BIT,
+ XMIT_SZ_8BIT = 1,
+ XMIT_SZ_16BIT = 2,
+ XMIT_SZ_32BIT = 3,
+ XMIT_SZ_64BIT = 0,
+ XMIT_SZ_256BIT = 4,
};
/*
* The DMA count is defined as the number of bytes to transfer.
*/
-static unsigned int ts_shift[] __maybe_unused = {
- [XMIT_SZ_64BIT] = 3,
- [XMIT_SZ_8BIT] = 0,
- [XMIT_SZ_16BIT] = 1,
- [XMIT_SZ_32BIT] = 2,
- [XMIT_SZ_256BIT] = 5,
-};
+#define TS_SHIFT { \
+ [XMIT_SZ_8BIT] = 0, \
+ [XMIT_SZ_16BIT] = 1, \
+ [XMIT_SZ_32BIT] = 2, \
+ [XMIT_SZ_64BIT] = 3, \
+ [XMIT_SZ_256BIT] = 5, \
+}
+
+#define TS_INDEX2VAL(i) (((i) & 7) << CHCR_TS_LOW_SHIFT)
+
#endif
#endif /* __ASM_CPU_SH4_DMA_H */
diff --git a/arch/sh/include/cpu-sh4/cpu/mmu_context.h b/arch/sh/include/cpu-sh4/cpu/mmu_context.h
index 3ce7ef6..03ea75c 100644
--- a/arch/sh/include/cpu-sh4/cpu/mmu_context.h
+++ b/arch/sh/include/cpu-sh4/cpu/mmu_context.h
@@ -25,6 +25,10 @@
#define MMUCR_TI (1<<2)
+#define MMUCR_URB 0x00FC0000
+#define MMUCR_URB_SHIFT 18
+#define MMUCR_URB_NENTRIES 64
+
#if defined(CONFIG_32BIT) && defined(CONFIG_CPU_SUBTYPE_ST40)
#define MMUCR_SE (1 << 4)
#else
diff --git a/arch/sh/include/cpu-sh4/cpu/sq.h b/arch/sh/include/cpu-sh4/cpu/sq.h
index 586d649..74716ba 100644
--- a/arch/sh/include/cpu-sh4/cpu/sq.h
+++ b/arch/sh/include/cpu-sh4/cpu/sq.h
@@ -12,6 +12,7 @@
#define __ASM_CPU_SH4_SQ_H
#include <asm/addrspace.h>
+#include <asm/page.h>
/*
* Store queues range from e0000000-e3fffffc, allowing approx. 64MB to be
@@ -28,7 +29,7 @@
/* arch/sh/kernel/cpu/sh4/sq.c */
unsigned long sq_remap(unsigned long phys, unsigned int size,
- const char *name, unsigned long flags);
+ const char *name, pgprot_t prot);
void sq_unmap(unsigned long vaddr);
void sq_flush_range(unsigned long start, unsigned int len);
diff --git a/arch/sh/include/cpu-sh4/cpu/ubc.h b/arch/sh/include/cpu-sh4/cpu/ubc.h
deleted file mode 100644
index c86e170..0000000
--- a/arch/sh/include/cpu-sh4/cpu/ubc.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * include/asm-sh/cpu-sh4/ubc.h
- *
- * Copyright (C) 1999 Niibe Yutaka
- * Copyright (C) 2003 Paul Mundt
- * Copyright (C) 2006 Lineo Solutions Inc. support SH4A UBC
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_CPU_SH4_UBC_H
-#define __ASM_CPU_SH4_UBC_H
-
-#if defined(CONFIG_CPU_SH4A)
-#define UBC_CBR0 0xff200000
-#define UBC_CRR0 0xff200004
-#define UBC_CAR0 0xff200008
-#define UBC_CAMR0 0xff20000c
-#define UBC_CBR1 0xff200020
-#define UBC_CRR1 0xff200024
-#define UBC_CAR1 0xff200028
-#define UBC_CAMR1 0xff20002c
-#define UBC_CDR1 0xff200030
-#define UBC_CDMR1 0xff200034
-#define UBC_CETR1 0xff200038
-#define UBC_CCMFR 0xff200600
-#define UBC_CBCR 0xff200620
-
-/* CBR */
-#define UBC_CBR_AIE (0x01<<30)
-#define UBC_CBR_ID_INST (0x01<<4)
-#define UBC_CBR_RW_READ (0x01<<1)
-#define UBC_CBR_CE (0x01)
-
-#define UBC_CBR_AIV_MASK (0x00FF0000)
-#define UBC_CBR_AIV_SHIFT (16)
-#define UBC_CBR_AIV_SET(asid) (((asid)<<UBC_CBR_AIV_SHIFT) & UBC_CBR_AIV_MASK)
-
-#define UBC_CBR_INIT 0x20000000
-
-/* CRR */
-#define UBC_CRR_RES (0x01<<13)
-#define UBC_CRR_PCB (0x01<<1)
-#define UBC_CRR_BIE (0x01)
-
-#define UBC_CRR_INIT 0x00002000
-
-#else /* CONFIG_CPU_SH4 */
-#define UBC_BARA 0xff200000
-#define UBC_BAMRA 0xff200004
-#define UBC_BBRA 0xff200008
-#define UBC_BASRA 0xff000014
-#define UBC_BARB 0xff20000c
-#define UBC_BAMRB 0xff200010
-#define UBC_BBRB 0xff200014
-#define UBC_BASRB 0xff000018
-#define UBC_BDRB 0xff200018
-#define UBC_BDMRB 0xff20001c
-#define UBC_BRCR 0xff200020
-#endif /* CONFIG_CPU_SH4 */
-
-#endif /* __ASM_CPU_SH4_UBC_H */
-
diff --git a/arch/sh/include/mach-common/mach/magicpanelr2.h b/arch/sh/include/mach-common/mach/magicpanelr2.h
index c644a77..183a2f7 100644
--- a/arch/sh/include/mach-common/mach/magicpanelr2.h
+++ b/arch/sh/include/mach-common/mach/magicpanelr2.h
@@ -19,12 +19,12 @@
#include <asm/io_generic.h>
-#define SETBITS_OUTB(mask, reg) ctrl_outb(ctrl_inb(reg) | mask, reg)
-#define SETBITS_OUTW(mask, reg) ctrl_outw(ctrl_inw(reg) | mask, reg)
-#define SETBITS_OUTL(mask, reg) ctrl_outl(ctrl_inl(reg) | mask, reg)
-#define CLRBITS_OUTB(mask, reg) ctrl_outb(ctrl_inb(reg) & ~mask, reg)
-#define CLRBITS_OUTW(mask, reg) ctrl_outw(ctrl_inw(reg) & ~mask, reg)
-#define CLRBITS_OUTL(mask, reg) ctrl_outl(ctrl_inl(reg) & ~mask, reg)
+#define SETBITS_OUTB(mask, reg) __raw_writeb(__raw_readb(reg) | mask, reg)
+#define SETBITS_OUTW(mask, reg) __raw_writew(__raw_readw(reg) | mask, reg)
+#define SETBITS_OUTL(mask, reg) __raw_writel(__raw_readl(reg) | mask, reg)
+#define CLRBITS_OUTB(mask, reg) __raw_writeb(__raw_readb(reg) & ~mask, reg)
+#define CLRBITS_OUTW(mask, reg) __raw_writew(__raw_readw(reg) & ~mask, reg)
+#define CLRBITS_OUTL(mask, reg) __raw_writel(__raw_readl(reg) & ~mask, reg)
#define PA_LED PORT_PADR /* LED */
diff --git a/arch/sh/include/mach-dreamcast/mach/sysasic.h b/arch/sh/include/mach-dreamcast/mach/sysasic.h
index f334266..58f710e 100644
--- a/arch/sh/include/mach-dreamcast/mach/sysasic.h
+++ b/arch/sh/include/mach-dreamcast/mach/sysasic.h
@@ -39,5 +39,10 @@
#define HW_EVENT_IRQ_MAX (HW_EVENT_IRQ_BASE + 95)
+/* arch/sh/boards/mach-dreamcast/irq.c */
+extern int systemasic_irq_demux(int);
+extern void systemasic_irq_init(void);
+extern void aica_time_init(void);
+
#endif /* __ASM_SH_DREAMCAST_SYSASIC_H */
diff --git a/arch/sh/include/mach-sdk7786/mach/fpga.h b/arch/sh/include/mach-sdk7786/mach/fpga.h
new file mode 100644
index 0000000..2120d67
--- /dev/null
+++ b/arch/sh/include/mach-sdk7786/mach/fpga.h
@@ -0,0 +1,114 @@
+#ifndef __MACH_SDK7786_FPGA_H
+#define __MACH_SDK7786_FPGA_H
+
+#include <linux/io.h>
+#include <linux/types.h>
+#include <linux/bitops.h>
+
+#define SRSTR 0x000
+#define SRSTR_MAGIC 0x1971 /* Fixed magical read value */
+
+#define INTASR 0x010
+#define INTAMR 0x020
+#define MODSWR 0x030
+#define INTTESTR 0x040
+#define SYSSR 0x050
+#define NRGPR 0x060
+#define NMISR 0x070
+
+#define NMIMR 0x080
+#define NMIMR_MAN_NMIM BIT(0) /* Manual NMI mask */
+#define NMIMR_AUX_NMIM BIT(1) /* Auxiliary NMI mask */
+
+#define INTBSR 0x090
+#define INTBMR 0x0a0
+#define USRLEDR 0x0b0
+#define MAPSWR 0x0c0
+#define FPGAVR 0x0d0
+#define FPGADR 0x0e0
+#define PCBRR 0x0f0
+#define RSR 0x100
+#define EXTASR 0x110
+#define SPCAR 0x120
+#define INTMSR 0x130
+#define PCIECR 0x140
+#define FAER 0x150
+#define USRGPIR 0x160
+/* 0x170 reserved */
+#define LCLASR 0x180
+
+#define SBCR 0x190
+#define SCBR_I2CMEN BIT(0) /* FPGA I2C master enable */
+#define SCBR_I2CCEN BIT(1) /* CPU I2C master enable */
+
+#define PWRCR 0x1a0
+#define SPCBR 0x1b0
+#define SPICR 0x1c0
+#define SPIDR 0x1d0
+#define I2CCR 0x1e0
+#define I2CDR 0x1f0
+#define FPGACR 0x200
+#define IASELR1 0x210
+#define IASELR2 0x220
+#define IASELR3 0x230
+#define IASELR4 0x240
+#define IASELR5 0x250
+#define IASELR6 0x260
+#define IASELR7 0x270
+#define IASELR8 0x280
+#define IASELR9 0x290
+#define IASELR10 0x2a0
+#define IASELR11 0x2b0
+#define IASELR12 0x2c0
+#define IASELR13 0x2d0
+#define IASELR14 0x2e0
+#define IASELR15 0x2f0
+/* 0x300 reserved */
+#define IBSELR1 0x310
+#define IBSELR2 0x320
+#define IBSELR3 0x330
+#define IBSELR4 0x340
+#define IBSELR5 0x350
+#define IBSELR6 0x360
+#define IBSELR7 0x370
+#define IBSELR8 0x380
+#define IBSELR9 0x390
+#define IBSELR10 0x3a0
+#define IBSELR11 0x3b0
+#define IBSELR12 0x3c0
+#define IBSELR13 0x3d0
+#define IBSELR14 0x3e0
+#define IBSELR15 0x3f0
+#define USRACR 0x400
+#define BEEPR 0x410
+#define USRLCDR 0x420
+#define SMBCR 0x430
+#define SMBDR 0x440
+#define USBCR 0x450
+#define AMSR 0x460
+#define ACCR 0x470
+#define SDIFCR 0x480
+
+/* arch/sh/boards/mach-sdk7786/fpga.c */
+extern void __iomem *sdk7786_fpga_base;
+extern void sdk7786_fpga_init(void);
+
+#define SDK7786_FPGA_REGADDR(reg) (sdk7786_fpga_base + (reg))
+
+/*
+ * A convenience wrapper from register offset to internal I2C address,
+ * when the FPGA is in I2C slave mode.
+ */
+#define SDK7786_FPGA_I2CADDR(reg) ((reg) >> 3)
+
+static inline u16 fpga_read_reg(unsigned int reg)
+{
+ return ioread16(sdk7786_fpga_base + reg);
+}
+
+static inline void fpga_write_reg(u16 val, unsigned int reg)
+{
+ iowrite16(val, sdk7786_fpga_base + reg);
+}
+
+#endif /* __MACH_SDK7786_FPGA_H */
diff --git a/arch/sh/include/mach-sdk7786/mach/irq.h b/arch/sh/include/mach-sdk7786/mach/irq.h
new file mode 100644
index 0000000..0f58463
--- /dev/null
+++ b/arch/sh/include/mach-sdk7786/mach/irq.h
@@ -0,0 +1,7 @@
+#ifndef __MACH_SDK7786_IRQ_H
+#define __MACH_SDK7786_IRQ_H
+
+/* arch/sh/boards/mach-sdk7786/irq.c */
+extern void sdk7786_init_irq(void);
+
+#endif /* __MACH_SDK7786_IRQ_H */
diff --git a/arch/sh/include/mach-se/mach/se7343.h b/arch/sh/include/mach-se/mach/se7343.h
index 749914b..8d8170d 100644
--- a/arch/sh/include/mach-se/mach/se7343.h
+++ b/arch/sh/include/mach-se/mach/se7343.h
@@ -94,26 +94,26 @@
#define PORT_DRVCR 0xA4050180
-#define PORT_PADR 0xA4050120
-#define PORT_PBDR 0xA4050122
-#define PORT_PCDR 0xA4050124
-#define PORT_PDDR 0xA4050126
-#define PORT_PEDR 0xA4050128
-#define PORT_PFDR 0xA405012A
-#define PORT_PGDR 0xA405012C
-#define PORT_PHDR 0xA405012E
-#define PORT_PJDR 0xA4050130
-#define PORT_PKDR 0xA4050132
-#define PORT_PLDR 0xA4050134
-#define PORT_PMDR 0xA4050136
-#define PORT_PNDR 0xA4050138
-#define PORT_PQDR 0xA405013A
-#define PORT_PRDR 0xA405013C
-#define PORT_PTDR 0xA4050160
-#define PORT_PUDR 0xA4050162
-#define PORT_PVDR 0xA4050164
-#define PORT_PWDR 0xA4050166
-#define PORT_PYDR 0xA4050168
+#define PORT_PADR 0xA4050120
+#define PORT_PBDR 0xA4050122
+#define PORT_PCDR 0xA4050124
+#define PORT_PDDR 0xA4050126
+#define PORT_PEDR 0xA4050128
+#define PORT_PFDR 0xA405012A
+#define PORT_PGDR 0xA405012C
+#define PORT_PHDR 0xA405012E
+#define PORT_PJDR 0xA4050130
+#define PORT_PKDR 0xA4050132
+#define PORT_PLDR 0xA4050134
+#define PORT_PMDR 0xA4050136
+#define PORT_PNDR 0xA4050138
+#define PORT_PQDR 0xA405013A
+#define PORT_PRDR 0xA405013C
+#define PORT_PTDR 0xA4050160
+#define PORT_PUDR 0xA4050162
+#define PORT_PVDR 0xA4050164
+#define PORT_PWDR 0xA4050166
+#define PORT_PYDR 0xA4050168
#define FPGA_IN 0xb1400000
#define FPGA_OUT 0xb1400002
@@ -133,18 +133,10 @@
#define SE7343_FPGA_IRQ_UARTB 11
#define SE7343_FPGA_IRQ_NR 12
-#define SE7343_FPGA_IRQ_BASE 120
-
-#define MRSHPC_IRQ3 (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_MRSHPC3)
-#define MRSHPC_IRQ2 (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_MRSHPC2)
-#define MRSHPC_IRQ1 (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_MRSHPC1)
-#define MRSHPC_IRQ0 (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_MRSHPC0)
-#define SMC_IRQ (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_SMC)
-#define USB_IRQ (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_USB)
-#define UARTA_IRQ (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_UARTA)
-#define UARTB_IRQ (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_UARTB)
/* arch/sh/boards/se/7343/irq.c */
+extern unsigned int se7343_fpga_irq[];
+
void init_7343se_IRQ(void);
#endif /* __ASM_SH_HITACHI_SE7343_H */
diff --git a/arch/sh/kernel/Makefile b/arch/sh/kernel/Makefile
index 0d587da..02fd3ae 100644
--- a/arch/sh/kernel/Makefile
+++ b/arch/sh/kernel/Makefile
@@ -13,8 +13,9 @@
obj-y := debugtraps.o dma-nommu.o dumpstack.o \
idle.o io.o io_generic.o irq.o \
- irq_$(BITS).o machvec.o nmi_debug.o process_$(BITS).o \
- ptrace_$(BITS).o return_address.o \
+ irq_$(BITS).o machvec.o nmi_debug.o process.o \
+ process_$(BITS).o ptrace_$(BITS).o \
+ reboot.o return_address.o \
setup.o signal_$(BITS).o sys_sh.o sys_sh$(BITS).o \
syscalls_$(BITS).o time.o topology.o traps.o \
traps_$(BITS).o unwinder.o
@@ -22,7 +23,7 @@
obj-y += cpu/
obj-$(CONFIG_VSYSCALL) += vsyscall/
obj-$(CONFIG_SMP) += smp.o
-obj-$(CONFIG_SH_STANDARD_BIOS) += sh_bios.o early_printk.o
+obj-$(CONFIG_SH_STANDARD_BIOS) += sh_bios.o
obj-$(CONFIG_KGDB) += kgdb.o
obj-$(CONFIG_SH_CPU_FREQ) += cpufreq.o
obj-$(CONFIG_MODULES) += sh_ksyms_$(BITS).o module.o
@@ -39,6 +40,7 @@
obj-$(CONFIG_DWARF_UNWINDER) += dwarf.o
obj-$(CONFIG_PERF_EVENTS) += perf_event.o perf_callchain.o
+obj-$(CONFIG_HAVE_HW_BREAKPOINT) += hw_breakpoint.o
obj-$(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST) += localtimer.o
EXTRA_CFLAGS += -Werror
diff --git a/arch/sh/kernel/cpu/Makefile b/arch/sh/kernel/cpu/Makefile
index d97c803..0e48bc61 100644
--- a/arch/sh/kernel/cpu/Makefile
+++ b/arch/sh/kernel/cpu/Makefile
@@ -17,5 +17,7 @@
obj-$(CONFIG_SH_ADC) += adc.o
obj-$(CONFIG_SH_CLK_CPG) += clock-cpg.o
+obj-$(CONFIG_SH_FPU) += fpu.o
+obj-$(CONFIG_SH_FPU_EMU) += fpu.o
obj-y += irq/ init.o clock.o hwblk.o
diff --git a/arch/sh/kernel/cpu/adc.c b/arch/sh/kernel/cpu/adc.c
index da3d687..d307571 100644
--- a/arch/sh/kernel/cpu/adc.c
+++ b/arch/sh/kernel/cpu/adc.c
@@ -18,19 +18,19 @@
off = (channel & 0x03) << 2;
- csr = ctrl_inb(ADCSR);
+ csr = __raw_readb(ADCSR);
csr = channel | ADCSR_ADST | ADCSR_CKS;
- ctrl_outb(csr, ADCSR);
+ __raw_writeb(csr, ADCSR);
do {
- csr = ctrl_inb(ADCSR);
+ csr = __raw_readb(ADCSR);
} while ((csr & ADCSR_ADF) == 0);
csr &= ~(ADCSR_ADF | ADCSR_ADST);
- ctrl_outb(csr, ADCSR);
+ __raw_writeb(csr, ADCSR);
- return (((ctrl_inb(ADDRAH + off) << 8) |
- ctrl_inb(ADDRAL + off)) >> 6);
+ return (((__raw_readb(ADDRAH + off) << 8) |
+ __raw_readb(ADDRAL + off)) >> 6);
}
EXPORT_SYMBOL(adc_single);
diff --git a/arch/sh/kernel/cpu/clock-cpg.c b/arch/sh/kernel/cpu/clock-cpg.c
index 6dfe2cc..eed5eaf 100644
--- a/arch/sh/kernel/cpu/clock-cpg.c
+++ b/arch/sh/kernel/cpu/clock-cpg.c
@@ -149,7 +149,8 @@
static unsigned long sh_clk_div4_recalc(struct clk *clk)
{
- struct clk_div_mult_table *table = clk->priv;
+ struct clk_div4_table *d4t = clk->priv;
+ struct clk_div_mult_table *table = d4t->div_mult_table;
unsigned int idx;
clk_rate_table_build(clk, clk->freq_table, table->nr_divisors,
@@ -160,17 +161,90 @@
return clk->freq_table[idx].frequency;
}
+static int sh_clk_div4_set_parent(struct clk *clk, struct clk *parent)
+{
+ struct clk_div4_table *d4t = clk->priv;
+ struct clk_div_mult_table *table = d4t->div_mult_table;
+ u32 value;
+ int ret;
+
+ if (!strcmp("pll_clk", parent->name))
+ value = __raw_readl(clk->enable_reg) & ~(1 << 7);
+ else
+ value = __raw_readl(clk->enable_reg) | (1 << 7);
+
+ ret = clk_reparent(clk, parent);
+ if (ret < 0)
+ return ret;
+
+ __raw_writel(value, clk->enable_reg);
+
+ /* Rebiuld the frequency table */
+ clk_rate_table_build(clk, clk->freq_table, table->nr_divisors,
+ table, &clk->arch_flags);
+
+ return 0;
+}
+
+static int sh_clk_div4_set_rate(struct clk *clk, unsigned long rate, int algo_id)
+{
+ struct clk_div4_table *d4t = clk->priv;
+ unsigned long value;
+ int idx = clk_rate_table_find(clk, clk->freq_table, rate);
+ if (idx < 0)
+ return idx;
+
+ value = __raw_readl(clk->enable_reg);
+ value &= ~(0xf << clk->enable_bit);
+ value |= (idx << clk->enable_bit);
+ __raw_writel(value, clk->enable_reg);
+
+ if (d4t->kick)
+ d4t->kick(clk);
+
+ return 0;
+}
+
+static int sh_clk_div4_enable(struct clk *clk)
+{
+ __raw_writel(__raw_readl(clk->enable_reg) & ~(1 << 8), clk->enable_reg);
+ return 0;
+}
+
+static void sh_clk_div4_disable(struct clk *clk)
+{
+ __raw_writel(__raw_readl(clk->enable_reg) | (1 << 8), clk->enable_reg);
+}
+
static struct clk_ops sh_clk_div4_clk_ops = {
.recalc = sh_clk_div4_recalc,
+ .set_rate = sh_clk_div4_set_rate,
.round_rate = sh_clk_div_round_rate,
};
-int __init sh_clk_div4_register(struct clk *clks, int nr,
- struct clk_div_mult_table *table)
+static struct clk_ops sh_clk_div4_enable_clk_ops = {
+ .recalc = sh_clk_div4_recalc,
+ .set_rate = sh_clk_div4_set_rate,
+ .round_rate = sh_clk_div_round_rate,
+ .enable = sh_clk_div4_enable,
+ .disable = sh_clk_div4_disable,
+};
+
+static struct clk_ops sh_clk_div4_reparent_clk_ops = {
+ .recalc = sh_clk_div4_recalc,
+ .set_rate = sh_clk_div4_set_rate,
+ .round_rate = sh_clk_div_round_rate,
+ .enable = sh_clk_div4_enable,
+ .disable = sh_clk_div4_disable,
+ .set_parent = sh_clk_div4_set_parent,
+};
+
+static int __init sh_clk_div4_register_ops(struct clk *clks, int nr,
+ struct clk_div4_table *table, struct clk_ops *ops)
{
struct clk *clkp;
void *freq_table;
- int nr_divs = table->nr_divisors;
+ int nr_divs = table->div_mult_table->nr_divisors;
int freq_table_size = sizeof(struct cpufreq_frequency_table);
int ret = 0;
int k;
@@ -185,7 +259,7 @@
for (k = 0; !ret && (k < nr); k++) {
clkp = clks + k;
- clkp->ops = &sh_clk_div4_clk_ops;
+ clkp->ops = ops;
clkp->id = -1;
clkp->priv = table;
@@ -198,6 +272,26 @@
return ret;
}
+int __init sh_clk_div4_register(struct clk *clks, int nr,
+ struct clk_div4_table *table)
+{
+ return sh_clk_div4_register_ops(clks, nr, table, &sh_clk_div4_clk_ops);
+}
+
+int __init sh_clk_div4_enable_register(struct clk *clks, int nr,
+ struct clk_div4_table *table)
+{
+ return sh_clk_div4_register_ops(clks, nr, table,
+ &sh_clk_div4_enable_clk_ops);
+}
+
+int __init sh_clk_div4_reparent_register(struct clk *clks, int nr,
+ struct clk_div4_table *table)
+{
+ return sh_clk_div4_register_ops(clks, nr, table,
+ &sh_clk_div4_reparent_clk_ops);
+}
+
#ifdef CONFIG_SH_CLK_CPG_LEGACY
static struct clk master_clk = {
.name = "master_clk",
diff --git a/arch/sh/kernel/cpu/fpu.c b/arch/sh/kernel/cpu/fpu.c
new file mode 100644
index 0000000..f059ed6
--- /dev/null
+++ b/arch/sh/kernel/cpu/fpu.c
@@ -0,0 +1,84 @@
+#include <linux/sched.h>
+#include <asm/processor.h>
+#include <asm/fpu.h>
+
+int init_fpu(struct task_struct *tsk)
+{
+ if (tsk_used_math(tsk)) {
+ if ((boot_cpu_data.flags & CPU_HAS_FPU) && tsk == current)
+ unlazy_fpu(tsk, task_pt_regs(tsk));
+ return 0;
+ }
+
+ /*
+ * Memory allocation at the first usage of the FPU and other state.
+ */
+ if (!tsk->thread.xstate) {
+ tsk->thread.xstate = kmem_cache_alloc(task_xstate_cachep,
+ GFP_KERNEL);
+ if (!tsk->thread.xstate)
+ return -ENOMEM;
+ }
+
+ if (boot_cpu_data.flags & CPU_HAS_FPU) {
+ struct sh_fpu_hard_struct *fp = &tsk->thread.xstate->hardfpu;
+ memset(fp, 0, xstate_size);
+ fp->fpscr = FPSCR_INIT;
+ } else {
+ struct sh_fpu_soft_struct *fp = &tsk->thread.xstate->softfpu;
+ memset(fp, 0, xstate_size);
+ fp->fpscr = FPSCR_INIT;
+ }
+
+ set_stopped_child_used_math(tsk);
+ return 0;
+}
+
+#ifdef CONFIG_SH_FPU
+void __fpu_state_restore(void)
+{
+ struct task_struct *tsk = current;
+
+ restore_fpu(tsk);
+
+ task_thread_info(tsk)->status |= TS_USEDFPU;
+ tsk->fpu_counter++;
+}
+
+void fpu_state_restore(struct pt_regs *regs)
+{
+ struct task_struct *tsk = current;
+
+ if (unlikely(!user_mode(regs))) {
+ printk(KERN_ERR "BUG: FPU is used in kernel mode.\n");
+ BUG();
+ return;
+ }
+
+ if (!tsk_used_math(tsk)) {
+ local_irq_enable();
+ /*
+ * does a slab alloc which can sleep
+ */
+ if (init_fpu(tsk)) {
+ /*
+ * ran out of memory!
+ */
+ do_group_exit(SIGKILL);
+ return;
+ }
+ local_irq_disable();
+ }
+
+ grab_fpu(regs);
+
+ __fpu_state_restore();
+}
+
+BUILD_TRAP_HANDLER(fpu_state_restore)
+{
+ TRAP_HANDLER_DECL;
+
+ fpu_state_restore(regs);
+}
+#endif /* CONFIG_SH_FPU */
diff --git a/arch/sh/kernel/cpu/init.c b/arch/sh/kernel/cpu/init.c
index 89b4b76..c736422 100644
--- a/arch/sh/kernel/cpu/init.c
+++ b/arch/sh/kernel/cpu/init.c
@@ -24,22 +24,32 @@
#include <asm/elf.h>
#include <asm/io.h>
#include <asm/smp.h>
-#ifdef CONFIG_SUPERH32
-#include <asm/ubc.h>
+#include <asm/sh_bios.h>
+
+#ifdef CONFIG_SH_FPU
+#define cpu_has_fpu 1
+#else
+#define cpu_has_fpu 0
+#endif
+
+#ifdef CONFIG_SH_DSP
+#define cpu_has_dsp 1
+#else
+#define cpu_has_dsp 0
#endif
/*
* Generic wrapper for command line arguments to disable on-chip
* peripherals (nofpu, nodsp, and so forth).
*/
-#define onchip_setup(x) \
-static int x##_disabled __initdata = 0; \
- \
-static int __init x##_setup(char *opts) \
-{ \
- x##_disabled = 1; \
- return 1; \
-} \
+#define onchip_setup(x) \
+static int x##_disabled __initdata = !cpu_has_##x; \
+ \
+static int __init x##_setup(char *opts) \
+{ \
+ x##_disabled = 1; \
+ return 1; \
+} \
__setup("no" __stringify(x), x##_setup);
onchip_setup(fpu);
@@ -52,10 +62,10 @@
static void __init speculative_execution_init(void)
{
/* Clear RABD */
- ctrl_outl(ctrl_inl(CPUOPM) & ~CPUOPM_RABD, CPUOPM);
+ __raw_writel(__raw_readl(CPUOPM) & ~CPUOPM_RABD, CPUOPM);
/* Flush the update */
- (void)ctrl_inl(CPUOPM);
+ (void)__raw_readl(CPUOPM);
ctrl_barrier();
}
#else
@@ -89,7 +99,7 @@
#endif
/* 2nd-level cache init */
-void __uses_jump_to_uncached __attribute__ ((weak)) l2_cache_init(void)
+void __attribute__ ((weak)) l2_cache_init(void)
{
}
@@ -97,12 +107,12 @@
* Generic first-level cache init
*/
#ifdef CONFIG_SUPERH32
-static void __uses_jump_to_uncached cache_init(void)
+static void cache_init(void)
{
unsigned long ccr, flags;
jump_to_uncached();
- ccr = ctrl_inl(CCR);
+ ccr = __raw_readl(CCR);
/*
* At this point we don't know whether the cache is enabled or not - a
@@ -146,7 +156,7 @@
for (addr = addrstart;
addr < addrstart + waysize;
addr += current_cpu_data.dcache.linesz)
- ctrl_outl(0, addr);
+ __raw_writel(0, addr);
addrstart += current_cpu_data.dcache.way_incr;
} while (--ways);
@@ -179,7 +189,7 @@
l2_cache_init();
- ctrl_outl(flags, CCR);
+ __raw_writel(flags, CCR);
back_to_cached();
}
#else
@@ -207,6 +217,18 @@
l2_cache_shape = -1; /* No S-cache */
}
+static void __init fpu_init(void)
+{
+ /* Disable the FPU */
+ if (fpu_disabled && (current_cpu_data.flags & CPU_HAS_FPU)) {
+ printk("FPU Disabled\n");
+ current_cpu_data.flags &= ~CPU_HAS_FPU;
+ }
+
+ disable_fpu();
+ clear_used_math();
+}
+
#ifdef CONFIG_SH_DSP
static void __init release_dsp(void)
{
@@ -244,28 +266,35 @@
if (sr & SR_DSP)
current_cpu_data.flags |= CPU_HAS_DSP;
+ /* Disable the DSP */
+ if (dsp_disabled && (current_cpu_data.flags & CPU_HAS_DSP)) {
+ printk("DSP Disabled\n");
+ current_cpu_data.flags &= ~CPU_HAS_DSP;
+ }
+
/* Now that we've determined the DSP status, clear the DSP bit. */
release_dsp();
}
+#else
+static inline void __init dsp_init(void) { }
#endif /* CONFIG_SH_DSP */
/**
* sh_cpu_init
*
- * This is our initial entry point for each CPU, and is invoked on the boot
- * CPU prior to calling start_kernel(). For SMP, a combination of this and
- * start_secondary() will bring up each processor to a ready state prior
- * to hand forking the idle loop.
+ * This is our initial entry point for each CPU, and is invoked on the
+ * boot CPU prior to calling start_kernel(). For SMP, a combination of
+ * this and start_secondary() will bring up each processor to a ready
+ * state prior to hand forking the idle loop.
*
- * We do all of the basic processor init here, including setting up the
- * caches, FPU, DSP, kicking the UBC, etc. By the time start_kernel() is
- * hit (and subsequently platform_setup()) things like determining the
- * CPU subtype and initial configuration will all be done.
+ * We do all of the basic processor init here, including setting up
+ * the caches, FPU, DSP, etc. By the time start_kernel() is hit (and
+ * subsequently platform_setup()) things like determining the CPU
+ * subtype and initial configuration will all be done.
*
* Each processor family is still responsible for doing its own probing
* and cache configuration in detect_cpu_and_cache_system().
*/
-
asmlinkage void __init sh_cpu_init(void)
{
current_thread_info()->cpu = hard_smp_processor_id();
@@ -302,18 +331,8 @@
detect_cache_shape();
}
- /* Disable the FPU */
- if (fpu_disabled) {
- printk("FPU Disabled\n");
- current_cpu_data.flags &= ~CPU_HAS_FPU;
- }
-
- /* FPU initialization */
- disable_fpu();
- if ((current_cpu_data.flags & CPU_HAS_FPU)) {
- current_thread_info()->status &= ~TS_USEDFPU;
- clear_used_math();
- }
+ fpu_init();
+ dsp_init();
/*
* Initialize the per-CPU ASID cache very early, since the
@@ -321,18 +340,24 @@
*/
current_cpu_data.asid_cache = NO_CONTEXT;
-#ifdef CONFIG_SH_DSP
- /* Probe for DSP */
- dsp_init();
-
- /* Disable the DSP */
- if (dsp_disabled) {
- printk("DSP Disabled\n");
- current_cpu_data.flags &= ~CPU_HAS_DSP;
- release_dsp();
- }
-#endif
-
speculative_execution_init();
expmask_init();
+
+ /* Do the rest of the boot processor setup */
+ if (raw_smp_processor_id() == 0) {
+ /* Save off the BIOS VBR, if there is one */
+ sh_bios_vbr_init();
+
+ /*
+ * Setup VBR for boot CPU. Secondary CPUs do this through
+ * start_secondary().
+ */
+ per_cpu_trap_init();
+
+ /*
+ * Boot processor to setup the FP and extended state
+ * context info.
+ */
+ init_thread_xstate();
+ }
}
diff --git a/arch/sh/kernel/cpu/irq/intc-sh5.c b/arch/sh/kernel/cpu/irq/intc-sh5.c
index 06e7e29..96a2395 100644
--- a/arch/sh/kernel/cpu/irq/intc-sh5.c
+++ b/arch/sh/kernel/cpu/irq/intc-sh5.c
@@ -123,7 +123,7 @@
bitmask = 1 << (irq - 32);
}
- ctrl_outl(bitmask, reg);
+ __raw_writel(bitmask, reg);
}
static void disable_intc_irq(unsigned int irq)
@@ -139,7 +139,7 @@
bitmask = 1 << (irq - 32);
}
- ctrl_outl(bitmask, reg);
+ __raw_writel(bitmask, reg);
}
static void mask_and_ack_intc(unsigned int irq)
@@ -170,11 +170,11 @@
/* Disable all interrupts and set all priorities to 0 to avoid trouble */
- ctrl_outl(-1, INTC_INTDSB_0);
- ctrl_outl(-1, INTC_INTDSB_1);
+ __raw_writel(-1, INTC_INTDSB_0);
+ __raw_writel(-1, INTC_INTDSB_1);
for (reg = INTC_INTPRI_0, i = 0; i < INTC_INTPRI_PREGS; i++, reg += 8)
- ctrl_outl( NO_PRIORITY, reg);
+ __raw_writel( NO_PRIORITY, reg);
#ifdef CONFIG_SH_CAYMAN
@@ -199,7 +199,7 @@
reg = INTC_ICR_SET;
i = IRQ_IRL0;
}
- ctrl_outl(INTC_ICR_IRLM, reg);
+ __raw_writel(INTC_ICR_IRLM, reg);
/* Set interrupt priorities according to platform description */
for (data = 0, reg = INTC_INTPRI_0; i < NR_INTC_IRQS; i++) {
@@ -207,7 +207,7 @@
((i % INTC_INTPRI_PPREG) * 4);
if ((i % INTC_INTPRI_PPREG) == (INTC_INTPRI_PPREG - 1)) {
/* Upon the 7th, set Priority Register */
- ctrl_outl(data, reg);
+ __raw_writel(data, reg);
data = 0;
reg += 8;
}
diff --git a/arch/sh/kernel/cpu/sh2/clock-sh7619.c b/arch/sh/kernel/cpu/sh2/clock-sh7619.c
index 4fe8631..0c9f24d 100644
--- a/arch/sh/kernel/cpu/sh2/clock-sh7619.c
+++ b/arch/sh/kernel/cpu/sh2/clock-sh7619.c
@@ -31,7 +31,7 @@
static void master_clk_init(struct clk *clk)
{
- clk->rate *= PLL2 * pll1rate[(ctrl_inw(FREQCR) >> 8) & 7];
+ clk->rate *= PLL2 * pll1rate[(__raw_readw(FREQCR) >> 8) & 7];
}
static struct clk_ops sh7619_master_clk_ops = {
@@ -40,7 +40,7 @@
static unsigned long module_clk_recalc(struct clk *clk)
{
- int idx = (ctrl_inw(FREQCR) & 0x0007);
+ int idx = (__raw_readw(FREQCR) & 0x0007);
return clk->parent->rate / pfc_divisors[idx];
}
@@ -50,7 +50,7 @@
static unsigned long bus_clk_recalc(struct clk *clk)
{
- return clk->parent->rate / pll1rate[(ctrl_inw(FREQCR) >> 8) & 7];
+ return clk->parent->rate / pll1rate[(__raw_readw(FREQCR) >> 8) & 7];
}
static struct clk_ops sh7619_bus_clk_ops = {
diff --git a/arch/sh/kernel/cpu/sh2a/clock-sh7201.c b/arch/sh/kernel/cpu/sh2a/clock-sh7201.c
index 7814c76..b26264d 100644
--- a/arch/sh/kernel/cpu/sh2a/clock-sh7201.c
+++ b/arch/sh/kernel/cpu/sh2a/clock-sh7201.c
@@ -34,7 +34,7 @@
static void master_clk_init(struct clk *clk)
{
- return 10000000 * PLL2 * pll1rate[(ctrl_inw(FREQCR) >> 8) & 0x0007];
+ return 10000000 * PLL2 * pll1rate[(__raw_readw(FREQCR) >> 8) & 0x0007];
}
static struct clk_ops sh7201_master_clk_ops = {
@@ -43,7 +43,7 @@
static unsigned long module_clk_recalc(struct clk *clk)
{
- int idx = (ctrl_inw(FREQCR) & 0x0007);
+ int idx = (__raw_readw(FREQCR) & 0x0007);
return clk->parent->rate / pfc_divisors[idx];
}
@@ -53,7 +53,7 @@
static unsigned long bus_clk_recalc(struct clk *clk)
{
- int idx = (ctrl_inw(FREQCR) & 0x0007);
+ int idx = (__raw_readw(FREQCR) & 0x0007);
return clk->parent->rate / pfc_divisors[idx];
}
@@ -63,7 +63,7 @@
static unsigned long cpu_clk_recalc(struct clk *clk)
{
- int idx = ((ctrl_inw(FREQCR) >> 4) & 0x0007);
+ int idx = ((__raw_readw(FREQCR) >> 4) & 0x0007);
return clk->parent->rate / ifc_divisors[idx];
}
diff --git a/arch/sh/kernel/cpu/sh2a/clock-sh7203.c b/arch/sh/kernel/cpu/sh2a/clock-sh7203.c
index 9409869..7e75d8f 100644
--- a/arch/sh/kernel/cpu/sh2a/clock-sh7203.c
+++ b/arch/sh/kernel/cpu/sh2a/clock-sh7203.c
@@ -39,7 +39,7 @@
static void master_clk_init(struct clk *clk)
{
- clk->rate *= pll1rate[(ctrl_inw(FREQCR) >> 8) & 0x0003] * PLL2 ;
+ clk->rate *= pll1rate[(__raw_readw(FREQCR) >> 8) & 0x0003] * PLL2 ;
}
static struct clk_ops sh7203_master_clk_ops = {
@@ -48,7 +48,7 @@
static unsigned long module_clk_recalc(struct clk *clk)
{
- int idx = (ctrl_inw(FREQCR) & 0x0007);
+ int idx = (__raw_readw(FREQCR) & 0x0007);
return clk->parent->rate / pfc_divisors[idx];
}
@@ -58,7 +58,7 @@
static unsigned long bus_clk_recalc(struct clk *clk)
{
- int idx = (ctrl_inw(FREQCR) & 0x0007);
+ int idx = (__raw_readw(FREQCR) & 0x0007);
return clk->parent->rate / pfc_divisors[idx-2];
}
diff --git a/arch/sh/kernel/cpu/sh2a/clock-sh7206.c b/arch/sh/kernel/cpu/sh2a/clock-sh7206.c
index c2268bd..b27a5e2 100644
--- a/arch/sh/kernel/cpu/sh2a/clock-sh7206.c
+++ b/arch/sh/kernel/cpu/sh2a/clock-sh7206.c
@@ -34,7 +34,7 @@
static void master_clk_init(struct clk *clk)
{
- clk->rate *= PLL2 * pll1rate[(ctrl_inw(FREQCR) >> 8) & 0x0007];
+ clk->rate *= PLL2 * pll1rate[(__raw_readw(FREQCR) >> 8) & 0x0007];
}
static struct clk_ops sh7206_master_clk_ops = {
@@ -43,7 +43,7 @@
static unsigned long module_clk_recalc(struct clk *clk)
{
- int idx = (ctrl_inw(FREQCR) & 0x0007);
+ int idx = (__raw_readw(FREQCR) & 0x0007);
return clk->parent->rate / pfc_divisors[idx];
}
@@ -53,7 +53,7 @@
static unsigned long bus_clk_recalc(struct clk *clk)
{
- return clk->parent->rate / pll1rate[(ctrl_inw(FREQCR) >> 8) & 0x0007];
+ return clk->parent->rate / pll1rate[(__raw_readw(FREQCR) >> 8) & 0x0007];
}
static struct clk_ops sh7206_bus_clk_ops = {
@@ -62,7 +62,7 @@
static unsigned long cpu_clk_recalc(struct clk *clk)
{
- int idx = (ctrl_inw(FREQCR) & 0x0007);
+ int idx = (__raw_readw(FREQCR) & 0x0007);
return clk->parent->rate / ifc_divisors[idx];
}
diff --git a/arch/sh/kernel/cpu/sh2a/fpu.c b/arch/sh/kernel/cpu/sh2a/fpu.c
index d395ce5..488d24e 100644
--- a/arch/sh/kernel/cpu/sh2a/fpu.c
+++ b/arch/sh/kernel/cpu/sh2a/fpu.c
@@ -26,8 +26,7 @@
/*
* Save FPU registers onto task structure.
*/
-void
-save_fpu(struct task_struct *tsk)
+void save_fpu(struct task_struct *tsk)
{
unsigned long dummy;
@@ -52,7 +51,7 @@
"fmov.s fr0, @-%0\n\t"
"lds %3, fpscr\n\t"
: "=r" (dummy)
- : "0" ((char *)(&tsk->thread.fpu.hard.status)),
+ : "0" ((char *)(&tsk->thread.xstate->hardfpu.status)),
"r" (FPSCR_RCHG),
"r" (FPSCR_INIT)
: "memory");
@@ -60,8 +59,7 @@
disable_fpu();
}
-static void
-restore_fpu(struct task_struct *tsk)
+void restore_fpu(struct task_struct *tsk)
{
unsigned long dummy;
@@ -85,45 +83,12 @@
"lds.l @%0+, fpscr\n\t"
"lds.l @%0+, fpul\n\t"
: "=r" (dummy)
- : "0" (&tsk->thread.fpu), "r" (FPSCR_RCHG)
+ : "0" (tsk->thread.xstate), "r" (FPSCR_RCHG)
: "memory");
disable_fpu();
}
/*
- * Load the FPU with signalling NANS. This bit pattern we're using
- * has the property that no matter wether considered as single or as
- * double precission represents signaling NANS.
- */
-
-static void
-fpu_init(void)
-{
- enable_fpu();
- asm volatile("lds %0, fpul\n\t"
- "fsts fpul, fr0\n\t"
- "fsts fpul, fr1\n\t"
- "fsts fpul, fr2\n\t"
- "fsts fpul, fr3\n\t"
- "fsts fpul, fr4\n\t"
- "fsts fpul, fr5\n\t"
- "fsts fpul, fr6\n\t"
- "fsts fpul, fr7\n\t"
- "fsts fpul, fr8\n\t"
- "fsts fpul, fr9\n\t"
- "fsts fpul, fr10\n\t"
- "fsts fpul, fr11\n\t"
- "fsts fpul, fr12\n\t"
- "fsts fpul, fr13\n\t"
- "fsts fpul, fr14\n\t"
- "fsts fpul, fr15\n\t"
- "lds %2, fpscr\n\t"
- : /* no output */
- : "r" (0), "r" (FPSCR_RCHG), "r" (FPSCR_INIT));
- disable_fpu();
-}
-
-/*
* Emulate arithmetic ops on denormalized number for some FPU insns.
*/
@@ -490,9 +455,9 @@
if ((finsn & 0xf1ff) == 0xf0ad) { /* fcnvsd */
struct task_struct *tsk = current;
- if ((tsk->thread.fpu.hard.fpscr & FPSCR_FPU_ERROR)) {
+ if ((tsk->thread.xstate->hardfpu.fpscr & FPSCR_FPU_ERROR)) {
/* FPU error */
- denormal_to_double (&tsk->thread.fpu.hard,
+ denormal_to_double (&tsk->thread.xstate->hardfpu,
(finsn >> 8) & 0xf);
} else
return 0;
@@ -507,9 +472,9 @@
n = (finsn >> 8) & 0xf;
m = (finsn >> 4) & 0xf;
- hx = tsk->thread.fpu.hard.fp_regs[n];
- hy = tsk->thread.fpu.hard.fp_regs[m];
- fpscr = tsk->thread.fpu.hard.fpscr;
+ hx = tsk->thread.xstate->hardfpu.fp_regs[n];
+ hy = tsk->thread.xstate->hardfpu.fp_regs[m];
+ fpscr = tsk->thread.xstate->hardfpu.fpscr;
prec = fpscr & (1 << 19);
if ((fpscr & FPSCR_FPU_ERROR)
@@ -519,15 +484,15 @@
/* FPU error because of denormal */
llx = ((long long) hx << 32)
- | tsk->thread.fpu.hard.fp_regs[n+1];
+ | tsk->thread.xstate->hardfpu.fp_regs[n+1];
lly = ((long long) hy << 32)
- | tsk->thread.fpu.hard.fp_regs[m+1];
+ | tsk->thread.xstate->hardfpu.fp_regs[m+1];
if ((hx & 0x7fffffff) >= 0x00100000)
llx = denormal_muld(lly, llx);
else
llx = denormal_muld(llx, lly);
- tsk->thread.fpu.hard.fp_regs[n] = llx >> 32;
- tsk->thread.fpu.hard.fp_regs[n+1] = llx & 0xffffffff;
+ tsk->thread.xstate->hardfpu.fp_regs[n] = llx >> 32;
+ tsk->thread.xstate->hardfpu.fp_regs[n+1] = llx & 0xffffffff;
} else if ((fpscr & FPSCR_FPU_ERROR)
&& (!prec && ((hx & 0x7fffffff) < 0x00800000
|| (hy & 0x7fffffff) < 0x00800000))) {
@@ -536,7 +501,7 @@
hx = denormal_mulf(hy, hx);
else
hx = denormal_mulf(hx, hy);
- tsk->thread.fpu.hard.fp_regs[n] = hx;
+ tsk->thread.xstate->hardfpu.fp_regs[n] = hx;
} else
return 0;
@@ -550,9 +515,9 @@
n = (finsn >> 8) & 0xf;
m = (finsn >> 4) & 0xf;
- hx = tsk->thread.fpu.hard.fp_regs[n];
- hy = tsk->thread.fpu.hard.fp_regs[m];
- fpscr = tsk->thread.fpu.hard.fpscr;
+ hx = tsk->thread.xstate->hardfpu.fp_regs[n];
+ hy = tsk->thread.xstate->hardfpu.fp_regs[m];
+ fpscr = tsk->thread.xstate->hardfpu.fpscr;
prec = fpscr & (1 << 19);
if ((fpscr & FPSCR_FPU_ERROR)
@@ -562,15 +527,15 @@
/* FPU error because of denormal */
llx = ((long long) hx << 32)
- | tsk->thread.fpu.hard.fp_regs[n+1];
+ | tsk->thread.xstate->hardfpu.fp_regs[n+1];
lly = ((long long) hy << 32)
- | tsk->thread.fpu.hard.fp_regs[m+1];
+ | tsk->thread.xstate->hardfpu.fp_regs[m+1];
if ((finsn & 0xf00f) == 0xf000)
llx = denormal_addd(llx, lly);
else
llx = denormal_addd(llx, lly ^ (1LL << 63));
- tsk->thread.fpu.hard.fp_regs[n] = llx >> 32;
- tsk->thread.fpu.hard.fp_regs[n+1] = llx & 0xffffffff;
+ tsk->thread.xstate->hardfpu.fp_regs[n] = llx >> 32;
+ tsk->thread.xstate->hardfpu.fp_regs[n+1] = llx & 0xffffffff;
} else if ((fpscr & FPSCR_FPU_ERROR)
&& (!prec && ((hx & 0x7fffffff) < 0x00800000
|| (hy & 0x7fffffff) < 0x00800000))) {
@@ -579,7 +544,7 @@
hx = denormal_addf(hx, hy);
else
hx = denormal_addf(hx, hy ^ 0x80000000);
- tsk->thread.fpu.hard.fp_regs[n] = hx;
+ tsk->thread.xstate->hardfpu.fp_regs[n] = hx;
} else
return 0;
@@ -597,7 +562,7 @@
__unlazy_fpu(tsk, regs);
if (ieee_fpe_handler(regs)) {
- tsk->thread.fpu.hard.fpscr &=
+ tsk->thread.xstate->hardfpu.fpscr &=
~(FPSCR_CAUSE_MASK | FPSCR_FLAG_MASK);
grab_fpu(regs);
restore_fpu(tsk);
@@ -607,33 +572,3 @@
force_sig(SIGFPE, tsk);
}
-
-void fpu_state_restore(struct pt_regs *regs)
-{
- struct task_struct *tsk = current;
-
- grab_fpu(regs);
- if (unlikely(!user_mode(regs))) {
- printk(KERN_ERR "BUG: FPU is used in kernel mode.\n");
- BUG();
- return;
- }
-
- if (likely(used_math())) {
- /* Using the FPU again. */
- restore_fpu(tsk);
- } else {
- /* First time FPU user. */
- fpu_init();
- set_used_math();
- }
- task_thread_info(tsk)->status |= TS_USEDFPU;
- tsk->fpu_counter++;
-}
-
-BUILD_TRAP_HANDLER(fpu_state_restore)
-{
- TRAP_HANDLER_DECL;
-
- fpu_state_restore(regs);
-}
diff --git a/arch/sh/kernel/cpu/sh3/clock-sh3.c b/arch/sh/kernel/cpu/sh3/clock-sh3.c
index 27b8738..b78384a 100644
--- a/arch/sh/kernel/cpu/sh3/clock-sh3.c
+++ b/arch/sh/kernel/cpu/sh3/clock-sh3.c
@@ -28,7 +28,7 @@
static void master_clk_init(struct clk *clk)
{
- int frqcr = ctrl_inw(FRQCR);
+ int frqcr = __raw_readw(FRQCR);
int idx = ((frqcr & 0x2000) >> 11) | (frqcr & 0x0003);
clk->rate *= pfc_divisors[idx];
@@ -40,7 +40,7 @@
static unsigned long module_clk_recalc(struct clk *clk)
{
- int frqcr = ctrl_inw(FRQCR);
+ int frqcr = __raw_readw(FRQCR);
int idx = ((frqcr & 0x2000) >> 11) | (frqcr & 0x0003);
return clk->parent->rate / pfc_divisors[idx];
@@ -52,7 +52,7 @@
static unsigned long bus_clk_recalc(struct clk *clk)
{
- int frqcr = ctrl_inw(FRQCR);
+ int frqcr = __raw_readw(FRQCR);
int idx = ((frqcr & 0x8000) >> 13) | ((frqcr & 0x0030) >> 4);
return clk->parent->rate / stc_multipliers[idx];
@@ -64,7 +64,7 @@
static unsigned long cpu_clk_recalc(struct clk *clk)
{
- int frqcr = ctrl_inw(FRQCR);
+ int frqcr = __raw_readw(FRQCR);
int idx = ((frqcr & 0x4000) >> 12) | ((frqcr & 0x000c) >> 2);
return clk->parent->rate / ifc_divisors[idx];
diff --git a/arch/sh/kernel/cpu/sh3/clock-sh7705.c b/arch/sh/kernel/cpu/sh3/clock-sh7705.c
index 0ca8f2c..0ecea14 100644
--- a/arch/sh/kernel/cpu/sh3/clock-sh7705.c
+++ b/arch/sh/kernel/cpu/sh3/clock-sh7705.c
@@ -32,7 +32,7 @@
static void master_clk_init(struct clk *clk)
{
- clk->rate *= pfc_divisors[ctrl_inw(FRQCR) & 0x0003];
+ clk->rate *= pfc_divisors[__raw_readw(FRQCR) & 0x0003];
}
static struct clk_ops sh7705_master_clk_ops = {
@@ -41,7 +41,7 @@
static unsigned long module_clk_recalc(struct clk *clk)
{
- int idx = ctrl_inw(FRQCR) & 0x0003;
+ int idx = __raw_readw(FRQCR) & 0x0003;
return clk->parent->rate / pfc_divisors[idx];
}
@@ -51,7 +51,7 @@
static unsigned long bus_clk_recalc(struct clk *clk)
{
- int idx = (ctrl_inw(FRQCR) & 0x0300) >> 8;
+ int idx = (__raw_readw(FRQCR) & 0x0300) >> 8;
return clk->parent->rate / stc_multipliers[idx];
}
@@ -61,7 +61,7 @@
static unsigned long cpu_clk_recalc(struct clk *clk)
{
- int idx = (ctrl_inw(FRQCR) & 0x0030) >> 4;
+ int idx = (__raw_readw(FRQCR) & 0x0030) >> 4;
return clk->parent->rate / ifc_divisors[idx];
}
diff --git a/arch/sh/kernel/cpu/sh3/clock-sh7706.c b/arch/sh/kernel/cpu/sh3/clock-sh7706.c
index 4bf7887..6f9ff8b 100644
--- a/arch/sh/kernel/cpu/sh3/clock-sh7706.c
+++ b/arch/sh/kernel/cpu/sh3/clock-sh7706.c
@@ -24,7 +24,7 @@
static void master_clk_init(struct clk *clk)
{
- int frqcr = ctrl_inw(FRQCR);
+ int frqcr = __raw_readw(FRQCR);
int idx = ((frqcr & 0x2000) >> 11) | (frqcr & 0x0003);
clk->rate *= pfc_divisors[idx];
@@ -36,7 +36,7 @@
static unsigned long module_clk_recalc(struct clk *clk)
{
- int frqcr = ctrl_inw(FRQCR);
+ int frqcr = __raw_readw(FRQCR);
int idx = ((frqcr & 0x2000) >> 11) | (frqcr & 0x0003);
return clk->parent->rate / pfc_divisors[idx];
@@ -48,7 +48,7 @@
static unsigned long bus_clk_recalc(struct clk *clk)
{
- int frqcr = ctrl_inw(FRQCR);
+ int frqcr = __raw_readw(FRQCR);
int idx = ((frqcr & 0x8000) >> 13) | ((frqcr & 0x0030) >> 4);
return clk->parent->rate / stc_multipliers[idx];
@@ -60,7 +60,7 @@
static unsigned long cpu_clk_recalc(struct clk *clk)
{
- int frqcr = ctrl_inw(FRQCR);
+ int frqcr = __raw_readw(FRQCR);
int idx = ((frqcr & 0x4000) >> 12) | ((frqcr & 0x000c) >> 2);
return clk->parent->rate / ifc_divisors[idx];
diff --git a/arch/sh/kernel/cpu/sh3/clock-sh7709.c b/arch/sh/kernel/cpu/sh3/clock-sh7709.c
index e874950..f302ba0 100644
--- a/arch/sh/kernel/cpu/sh3/clock-sh7709.c
+++ b/arch/sh/kernel/cpu/sh3/clock-sh7709.c
@@ -24,7 +24,7 @@
static void master_clk_init(struct clk *clk)
{
- int frqcr = ctrl_inw(FRQCR);
+ int frqcr = __raw_readw(FRQCR);
int idx = ((frqcr & 0x2000) >> 11) | (frqcr & 0x0003);
clk->rate *= pfc_divisors[idx];
@@ -36,7 +36,7 @@
static unsigned long module_clk_recalc(struct clk *clk)
{
- int frqcr = ctrl_inw(FRQCR);
+ int frqcr = __raw_readw(FRQCR);
int idx = ((frqcr & 0x2000) >> 11) | (frqcr & 0x0003);
return clk->parent->rate / pfc_divisors[idx];
@@ -48,7 +48,7 @@
static unsigned long bus_clk_recalc(struct clk *clk)
{
- int frqcr = ctrl_inw(FRQCR);
+ int frqcr = __raw_readw(FRQCR);
int idx = (frqcr & 0x0080) ?
((frqcr & 0x8000) >> 13) | ((frqcr & 0x0030) >> 4) : 1;
@@ -61,7 +61,7 @@
static unsigned long cpu_clk_recalc(struct clk *clk)
{
- int frqcr = ctrl_inw(FRQCR);
+ int frqcr = __raw_readw(FRQCR);
int idx = ((frqcr & 0x4000) >> 12) | ((frqcr & 0x000c) >> 2);
return clk->parent->rate / ifc_divisors[idx];
diff --git a/arch/sh/kernel/cpu/sh3/clock-sh7710.c b/arch/sh/kernel/cpu/sh3/clock-sh7710.c
index 030a58b..29a87d8 100644
--- a/arch/sh/kernel/cpu/sh3/clock-sh7710.c
+++ b/arch/sh/kernel/cpu/sh3/clock-sh7710.c
@@ -26,7 +26,7 @@
static void master_clk_init(struct clk *clk)
{
- clk->rate *= md_table[ctrl_inw(FRQCR) & 0x0007];
+ clk->rate *= md_table[__raw_readw(FRQCR) & 0x0007];
}
static struct clk_ops sh7710_master_clk_ops = {
@@ -35,7 +35,7 @@
static unsigned long module_clk_recalc(struct clk *clk)
{
- int idx = (ctrl_inw(FRQCR) & 0x0007);
+ int idx = (__raw_readw(FRQCR) & 0x0007);
return clk->parent->rate / md_table[idx];
}
@@ -45,7 +45,7 @@
static unsigned long bus_clk_recalc(struct clk *clk)
{
- int idx = (ctrl_inw(FRQCR) & 0x0700) >> 8;
+ int idx = (__raw_readw(FRQCR) & 0x0700) >> 8;
return clk->parent->rate / md_table[idx];
}
@@ -55,7 +55,7 @@
static unsigned long cpu_clk_recalc(struct clk *clk)
{
- int idx = (ctrl_inw(FRQCR) & 0x0070) >> 4;
+ int idx = (__raw_readw(FRQCR) & 0x0070) >> 4;
return clk->parent->rate / md_table[idx];
}
diff --git a/arch/sh/kernel/cpu/sh3/clock-sh7712.c b/arch/sh/kernel/cpu/sh3/clock-sh7712.c
index 6428ee6c..b0d0c52 100644
--- a/arch/sh/kernel/cpu/sh3/clock-sh7712.c
+++ b/arch/sh/kernel/cpu/sh3/clock-sh7712.c
@@ -23,7 +23,7 @@
static void master_clk_init(struct clk *clk)
{
- int frqcr = ctrl_inw(FRQCR);
+ int frqcr = __raw_readw(FRQCR);
int idx = (frqcr & 0x0300) >> 8;
clk->rate *= multipliers[idx];
@@ -35,7 +35,7 @@
static unsigned long module_clk_recalc(struct clk *clk)
{
- int frqcr = ctrl_inw(FRQCR);
+ int frqcr = __raw_readw(FRQCR);
int idx = frqcr & 0x0007;
return clk->parent->rate / divisors[idx];
@@ -47,7 +47,7 @@
static unsigned long cpu_clk_recalc(struct clk *clk)
{
- int frqcr = ctrl_inw(FRQCR);
+ int frqcr = __raw_readw(FRQCR);
int idx = (frqcr & 0x0030) >> 4;
return clk->parent->rate / divisors[idx];
diff --git a/arch/sh/kernel/cpu/sh3/ex.S b/arch/sh/kernel/cpu/sh3/ex.S
index 46610c3..99b4d02 100644
--- a/arch/sh/kernel/cpu/sh3/ex.S
+++ b/arch/sh/kernel/cpu/sh3/ex.S
@@ -49,7 +49,7 @@
.long exception_error ! reserved_instruction (filled by trap_init) /* 180 */
.long exception_error ! illegal_slot_instruction (filled by trap_init) /*1A0*/
.long nmi_trap_handler /* 1C0 */ ! Allow trap to debugger
- .long break_point_trap /* 1E0 */
+ .long breakpoint_trap_handler /* 1E0 */
/*
* Pad the remainder of the table out, exceptions residing in far
diff --git a/arch/sh/kernel/cpu/sh3/probe.c b/arch/sh/kernel/cpu/sh3/probe.c
index f9c7df6..295ec4c 100644
--- a/arch/sh/kernel/cpu/sh3/probe.c
+++ b/arch/sh/kernel/cpu/sh3/probe.c
@@ -16,7 +16,7 @@
#include <asm/cache.h>
#include <asm/io.h>
-int __uses_jump_to_uncached detect_cpu_and_cache_system(void)
+int detect_cpu_and_cache_system(void)
{
unsigned long addr0, addr1, data0, data1, data2, data3;
@@ -30,23 +30,23 @@
addr1 = CACHE_OC_ADDRESS_ARRAY + (1 << 12);
/* First, write back & invalidate */
- data0 = ctrl_inl(addr0);
- ctrl_outl(data0&~(SH_CACHE_VALID|SH_CACHE_UPDATED), addr0);
- data1 = ctrl_inl(addr1);
- ctrl_outl(data1&~(SH_CACHE_VALID|SH_CACHE_UPDATED), addr1);
+ data0 = __raw_readl(addr0);
+ __raw_writel(data0&~(SH_CACHE_VALID|SH_CACHE_UPDATED), addr0);
+ data1 = __raw_readl(addr1);
+ __raw_writel(data1&~(SH_CACHE_VALID|SH_CACHE_UPDATED), addr1);
/* Next, check if there's shadow or not */
- data0 = ctrl_inl(addr0);
+ data0 = __raw_readl(addr0);
data0 ^= SH_CACHE_VALID;
- ctrl_outl(data0, addr0);
- data1 = ctrl_inl(addr1);
+ __raw_writel(data0, addr0);
+ data1 = __raw_readl(addr1);
data2 = data1 ^ SH_CACHE_VALID;
- ctrl_outl(data2, addr1);
- data3 = ctrl_inl(addr0);
+ __raw_writel(data2, addr1);
+ data3 = __raw_readl(addr0);
/* Lastly, invaliate them. */
- ctrl_outl(data0&~SH_CACHE_VALID, addr0);
- ctrl_outl(data2&~SH_CACHE_VALID, addr1);
+ __raw_writel(data0&~SH_CACHE_VALID, addr0);
+ __raw_writel(data2&~SH_CACHE_VALID, addr1);
back_to_cached();
@@ -94,9 +94,9 @@
boot_cpu_data.dcache.way_incr = (1 << 13);
boot_cpu_data.dcache.entry_mask = 0x1ff0;
boot_cpu_data.dcache.sets = 512;
- ctrl_outl(CCR_CACHE_32KB, CCR3_REG);
+ __raw_writel(CCR_CACHE_32KB, CCR3_REG);
#else
- ctrl_outl(CCR_CACHE_16KB, CCR3_REG);
+ __raw_writel(CCR_CACHE_16KB, CCR3_REG);
#endif
#endif
}
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh3.c b/arch/sh/kernel/cpu/sh3/setup-sh3.c
index c988468..53be70b 100644
--- a/arch/sh/kernel/cpu/sh3/setup-sh3.c
+++ b/arch/sh/kernel/cpu/sh3/setup-sh3.c
@@ -58,7 +58,7 @@
void __init plat_irq_setup_pins(int mode)
{
if (mode == IRQ_MODE_IRQ) {
- ctrl_outw(ctrl_inw(INTC_ICR1) & ~INTC_ICR1_IRQLVL, INTC_ICR1);
+ __raw_writew(__raw_readw(INTC_ICR1) & ~INTC_ICR1_IRQLVL, INTC_ICR1);
register_intc_controller(&intc_desc_irq0123);
return;
}
diff --git a/arch/sh/kernel/cpu/sh4/clock-sh4-202.c b/arch/sh/kernel/cpu/sh4/clock-sh4-202.c
index 21421e3..6b80850 100644
--- a/arch/sh/kernel/cpu/sh4/clock-sh4-202.c
+++ b/arch/sh/kernel/cpu/sh4/clock-sh4-202.c
@@ -23,7 +23,7 @@
static unsigned long emi_clk_recalc(struct clk *clk)
{
- int idx = ctrl_inl(CPG2_FRQCR3) & 0x0007;
+ int idx = __raw_readl(CPG2_FRQCR3) & 0x0007;
return clk->parent->rate / frqcr3_divisors[idx];
}
@@ -52,7 +52,7 @@
static unsigned long femi_clk_recalc(struct clk *clk)
{
- int idx = (ctrl_inl(CPG2_FRQCR3) >> 3) & 0x0007;
+ int idx = (__raw_readl(CPG2_FRQCR3) >> 3) & 0x0007;
return clk->parent->rate / frqcr3_divisors[idx];
}
@@ -92,7 +92,7 @@
static unsigned long shoc_clk_recalc(struct clk *clk)
{
- int idx = (ctrl_inl(CPG2_FRQCR3) >> 6) & 0x0007;
+ int idx = (__raw_readl(CPG2_FRQCR3) >> 6) & 0x0007;
return clk->parent->rate / frqcr3_divisors[idx];
}
@@ -122,10 +122,10 @@
tmp = frqcr3_lookup(clk, rate);
- frqcr3 = ctrl_inl(CPG2_FRQCR3);
+ frqcr3 = __raw_readl(CPG2_FRQCR3);
frqcr3 &= ~(0x0007 << 6);
frqcr3 |= tmp << 6;
- ctrl_outl(frqcr3, CPG2_FRQCR3);
+ __raw_writel(frqcr3, CPG2_FRQCR3);
clk->rate = clk->parent->rate / frqcr3_divisors[tmp];
diff --git a/arch/sh/kernel/cpu/sh4/clock-sh4.c b/arch/sh/kernel/cpu/sh4/clock-sh4.c
index 73294d9..5add75c 100644
--- a/arch/sh/kernel/cpu/sh4/clock-sh4.c
+++ b/arch/sh/kernel/cpu/sh4/clock-sh4.c
@@ -28,7 +28,7 @@
static void master_clk_init(struct clk *clk)
{
- clk->rate *= pfc_divisors[ctrl_inw(FRQCR) & 0x0007];
+ clk->rate *= pfc_divisors[__raw_readw(FRQCR) & 0x0007];
}
static struct clk_ops sh4_master_clk_ops = {
@@ -37,7 +37,7 @@
static unsigned long module_clk_recalc(struct clk *clk)
{
- int idx = (ctrl_inw(FRQCR) & 0x0007);
+ int idx = (__raw_readw(FRQCR) & 0x0007);
return clk->parent->rate / pfc_divisors[idx];
}
@@ -47,7 +47,7 @@
static unsigned long bus_clk_recalc(struct clk *clk)
{
- int idx = (ctrl_inw(FRQCR) >> 3) & 0x0007;
+ int idx = (__raw_readw(FRQCR) >> 3) & 0x0007;
return clk->parent->rate / bfc_divisors[idx];
}
@@ -57,7 +57,7 @@
static unsigned long cpu_clk_recalc(struct clk *clk)
{
- int idx = (ctrl_inw(FRQCR) >> 6) & 0x0007;
+ int idx = (__raw_readw(FRQCR) >> 6) & 0x0007;
return clk->parent->rate / ifc_divisors[idx];
}
diff --git a/arch/sh/kernel/cpu/sh4/fpu.c b/arch/sh/kernel/cpu/sh4/fpu.c
index e97857a..447482d 100644
--- a/arch/sh/kernel/cpu/sh4/fpu.c
+++ b/arch/sh/kernel/cpu/sh4/fpu.c
@@ -85,14 +85,14 @@
"fmov.s fr1, @-%0\n\t"
"fmov.s fr0, @-%0\n\t"
"lds %3, fpscr\n\t":"=r" (dummy)
- :"0"((char *)(&tsk->thread.fpu.hard.status)),
+ :"0"((char *)(&tsk->thread.xstate->hardfpu.status)),
"r"(FPSCR_RCHG), "r"(FPSCR_INIT)
:"memory");
disable_fpu();
}
-static void restore_fpu(struct task_struct *tsk)
+void restore_fpu(struct task_struct *tsk)
{
unsigned long dummy;
@@ -135,62 +135,11 @@
"lds.l @%0+, fpscr\n\t"
"lds.l @%0+, fpul\n\t"
:"=r" (dummy)
- :"0"(&tsk->thread.fpu), "r"(FPSCR_RCHG)
+ :"0" (tsk->thread.xstate), "r" (FPSCR_RCHG)
:"memory");
disable_fpu();
}
-/*
- * Load the FPU with signalling NANS. This bit pattern we're using
- * has the property that no matter wether considered as single or as
- * double precision represents signaling NANS.
- */
-
-static void fpu_init(void)
-{
- enable_fpu();
- asm volatile ( "lds %0, fpul\n\t"
- "lds %1, fpscr\n\t"
- "fsts fpul, fr0\n\t"
- "fsts fpul, fr1\n\t"
- "fsts fpul, fr2\n\t"
- "fsts fpul, fr3\n\t"
- "fsts fpul, fr4\n\t"
- "fsts fpul, fr5\n\t"
- "fsts fpul, fr6\n\t"
- "fsts fpul, fr7\n\t"
- "fsts fpul, fr8\n\t"
- "fsts fpul, fr9\n\t"
- "fsts fpul, fr10\n\t"
- "fsts fpul, fr11\n\t"
- "fsts fpul, fr12\n\t"
- "fsts fpul, fr13\n\t"
- "fsts fpul, fr14\n\t"
- "fsts fpul, fr15\n\t"
- "frchg\n\t"
- "fsts fpul, fr0\n\t"
- "fsts fpul, fr1\n\t"
- "fsts fpul, fr2\n\t"
- "fsts fpul, fr3\n\t"
- "fsts fpul, fr4\n\t"
- "fsts fpul, fr5\n\t"
- "fsts fpul, fr6\n\t"
- "fsts fpul, fr7\n\t"
- "fsts fpul, fr8\n\t"
- "fsts fpul, fr9\n\t"
- "fsts fpul, fr10\n\t"
- "fsts fpul, fr11\n\t"
- "fsts fpul, fr12\n\t"
- "fsts fpul, fr13\n\t"
- "fsts fpul, fr14\n\t"
- "fsts fpul, fr15\n\t"
- "frchg\n\t"
- "lds %2, fpscr\n\t"
- : /* no output */
- :"r" (0), "r"(FPSCR_RCHG), "r"(FPSCR_INIT));
- disable_fpu();
-}
-
/**
* denormal_to_double - Given denormalized float number,
* store double float
@@ -282,9 +231,9 @@
/* fcnvsd */
struct task_struct *tsk = current;
- if ((tsk->thread.fpu.hard.fpscr & FPSCR_CAUSE_ERROR))
+ if ((tsk->thread.xstate->hardfpu.fpscr & FPSCR_CAUSE_ERROR))
/* FPU error */
- denormal_to_double(&tsk->thread.fpu.hard,
+ denormal_to_double(&tsk->thread.xstate->hardfpu,
(finsn >> 8) & 0xf);
else
return 0;
@@ -300,9 +249,9 @@
n = (finsn >> 8) & 0xf;
m = (finsn >> 4) & 0xf;
- hx = tsk->thread.fpu.hard.fp_regs[n];
- hy = tsk->thread.fpu.hard.fp_regs[m];
- fpscr = tsk->thread.fpu.hard.fpscr;
+ hx = tsk->thread.xstate->hardfpu.fp_regs[n];
+ hy = tsk->thread.xstate->hardfpu.fp_regs[m];
+ fpscr = tsk->thread.xstate->hardfpu.fpscr;
prec = fpscr & FPSCR_DBL_PRECISION;
if ((fpscr & FPSCR_CAUSE_ERROR)
@@ -312,18 +261,18 @@
/* FPU error because of denormal (doubles) */
llx = ((long long)hx << 32)
- | tsk->thread.fpu.hard.fp_regs[n + 1];
+ | tsk->thread.xstate->hardfpu.fp_regs[n + 1];
lly = ((long long)hy << 32)
- | tsk->thread.fpu.hard.fp_regs[m + 1];
+ | tsk->thread.xstate->hardfpu.fp_regs[m + 1];
llx = float64_mul(llx, lly);
- tsk->thread.fpu.hard.fp_regs[n] = llx >> 32;
- tsk->thread.fpu.hard.fp_regs[n + 1] = llx & 0xffffffff;
+ tsk->thread.xstate->hardfpu.fp_regs[n] = llx >> 32;
+ tsk->thread.xstate->hardfpu.fp_regs[n + 1] = llx & 0xffffffff;
} else if ((fpscr & FPSCR_CAUSE_ERROR)
&& (!prec && ((hx & 0x7fffffff) < 0x00800000
|| (hy & 0x7fffffff) < 0x00800000))) {
/* FPU error because of denormal (floats) */
hx = float32_mul(hx, hy);
- tsk->thread.fpu.hard.fp_regs[n] = hx;
+ tsk->thread.xstate->hardfpu.fp_regs[n] = hx;
} else
return 0;
@@ -338,9 +287,9 @@
n = (finsn >> 8) & 0xf;
m = (finsn >> 4) & 0xf;
- hx = tsk->thread.fpu.hard.fp_regs[n];
- hy = tsk->thread.fpu.hard.fp_regs[m];
- fpscr = tsk->thread.fpu.hard.fpscr;
+ hx = tsk->thread.xstate->hardfpu.fp_regs[n];
+ hy = tsk->thread.xstate->hardfpu.fp_regs[m];
+ fpscr = tsk->thread.xstate->hardfpu.fpscr;
prec = fpscr & FPSCR_DBL_PRECISION;
if ((fpscr & FPSCR_CAUSE_ERROR)
@@ -350,15 +299,15 @@
/* FPU error because of denormal (doubles) */
llx = ((long long)hx << 32)
- | tsk->thread.fpu.hard.fp_regs[n + 1];
+ | tsk->thread.xstate->hardfpu.fp_regs[n + 1];
lly = ((long long)hy << 32)
- | tsk->thread.fpu.hard.fp_regs[m + 1];
+ | tsk->thread.xstate->hardfpu.fp_regs[m + 1];
if ((finsn & 0xf00f) == 0xf000)
llx = float64_add(llx, lly);
else
llx = float64_sub(llx, lly);
- tsk->thread.fpu.hard.fp_regs[n] = llx >> 32;
- tsk->thread.fpu.hard.fp_regs[n + 1] = llx & 0xffffffff;
+ tsk->thread.xstate->hardfpu.fp_regs[n] = llx >> 32;
+ tsk->thread.xstate->hardfpu.fp_regs[n + 1] = llx & 0xffffffff;
} else if ((fpscr & FPSCR_CAUSE_ERROR)
&& (!prec && ((hx & 0x7fffffff) < 0x00800000
|| (hy & 0x7fffffff) < 0x00800000))) {
@@ -367,7 +316,7 @@
hx = float32_add(hx, hy);
else
hx = float32_sub(hx, hy);
- tsk->thread.fpu.hard.fp_regs[n] = hx;
+ tsk->thread.xstate->hardfpu.fp_regs[n] = hx;
} else
return 0;
@@ -382,9 +331,9 @@
n = (finsn >> 8) & 0xf;
m = (finsn >> 4) & 0xf;
- hx = tsk->thread.fpu.hard.fp_regs[n];
- hy = tsk->thread.fpu.hard.fp_regs[m];
- fpscr = tsk->thread.fpu.hard.fpscr;
+ hx = tsk->thread.xstate->hardfpu.fp_regs[n];
+ hy = tsk->thread.xstate->hardfpu.fp_regs[m];
+ fpscr = tsk->thread.xstate->hardfpu.fpscr;
prec = fpscr & FPSCR_DBL_PRECISION;
if ((fpscr & FPSCR_CAUSE_ERROR)
@@ -394,20 +343,20 @@
/* FPU error because of denormal (doubles) */
llx = ((long long)hx << 32)
- | tsk->thread.fpu.hard.fp_regs[n + 1];
+ | tsk->thread.xstate->hardfpu.fp_regs[n + 1];
lly = ((long long)hy << 32)
- | tsk->thread.fpu.hard.fp_regs[m + 1];
+ | tsk->thread.xstate->hardfpu.fp_regs[m + 1];
llx = float64_div(llx, lly);
- tsk->thread.fpu.hard.fp_regs[n] = llx >> 32;
- tsk->thread.fpu.hard.fp_regs[n + 1] = llx & 0xffffffff;
+ tsk->thread.xstate->hardfpu.fp_regs[n] = llx >> 32;
+ tsk->thread.xstate->hardfpu.fp_regs[n + 1] = llx & 0xffffffff;
} else if ((fpscr & FPSCR_CAUSE_ERROR)
&& (!prec && ((hx & 0x7fffffff) < 0x00800000
|| (hy & 0x7fffffff) < 0x00800000))) {
/* FPU error because of denormal (floats) */
hx = float32_div(hx, hy);
- tsk->thread.fpu.hard.fp_regs[n] = hx;
+ tsk->thread.xstate->hardfpu.fp_regs[n] = hx;
} else
return 0;
@@ -420,17 +369,17 @@
unsigned int hx;
m = (finsn >> 8) & 0x7;
- hx = tsk->thread.fpu.hard.fp_regs[m];
+ hx = tsk->thread.xstate->hardfpu.fp_regs[m];
- if ((tsk->thread.fpu.hard.fpscr & FPSCR_CAUSE_ERROR)
+ if ((tsk->thread.xstate->hardfpu.fpscr & FPSCR_CAUSE_ERROR)
&& ((hx & 0x7fffffff) < 0x00100000)) {
/* subnormal double to float conversion */
long long llx;
- llx = ((long long)tsk->thread.fpu.hard.fp_regs[m] << 32)
- | tsk->thread.fpu.hard.fp_regs[m + 1];
+ llx = ((long long)tsk->thread.xstate->hardfpu.fp_regs[m] << 32)
+ | tsk->thread.xstate->hardfpu.fp_regs[m + 1];
- tsk->thread.fpu.hard.fpul = float64_to_float32(llx);
+ tsk->thread.xstate->hardfpu.fpul = float64_to_float32(llx);
} else
return 0;
@@ -449,7 +398,7 @@
int float_rounding_mode(void)
{
struct task_struct *tsk = current;
- int roundingMode = FPSCR_ROUNDING_MODE(tsk->thread.fpu.hard.fpscr);
+ int roundingMode = FPSCR_ROUNDING_MODE(tsk->thread.xstate->hardfpu.fpscr);
return roundingMode;
}
@@ -461,16 +410,16 @@
__unlazy_fpu(tsk, regs);
fpu_exception_flags = 0;
if (ieee_fpe_handler(regs)) {
- tsk->thread.fpu.hard.fpscr &=
+ tsk->thread.xstate->hardfpu.fpscr &=
~(FPSCR_CAUSE_MASK | FPSCR_FLAG_MASK);
- tsk->thread.fpu.hard.fpscr |= fpu_exception_flags;
+ tsk->thread.xstate->hardfpu.fpscr |= fpu_exception_flags;
/* Set the FPSCR flag as well as cause bits - simply
* replicate the cause */
- tsk->thread.fpu.hard.fpscr |= (fpu_exception_flags >> 10);
+ tsk->thread.xstate->hardfpu.fpscr |= (fpu_exception_flags >> 10);
grab_fpu(regs);
restore_fpu(tsk);
task_thread_info(tsk)->status |= TS_USEDFPU;
- if ((((tsk->thread.fpu.hard.fpscr & FPSCR_ENABLE_MASK) >> 7) &
+ if ((((tsk->thread.xstate->hardfpu.fpscr & FPSCR_ENABLE_MASK) >> 7) &
(fpu_exception_flags >> 2)) == 0) {
return;
}
@@ -478,33 +427,3 @@
force_sig(SIGFPE, tsk);
}
-
-void fpu_state_restore(struct pt_regs *regs)
-{
- struct task_struct *tsk = current;
-
- grab_fpu(regs);
- if (unlikely(!user_mode(regs))) {
- printk(KERN_ERR "BUG: FPU is used in kernel mode.\n");
- BUG();
- return;
- }
-
- if (likely(used_math())) {
- /* Using the FPU again. */
- restore_fpu(tsk);
- } else {
- /* First time FPU user. */
- fpu_init();
- set_used_math();
- }
- task_thread_info(tsk)->status |= TS_USEDFPU;
- tsk->fpu_counter++;
-}
-
-BUILD_TRAP_HANDLER(fpu_state_restore)
-{
- TRAP_HANDLER_DECL;
-
- fpu_state_restore(regs);
-}
diff --git a/arch/sh/kernel/cpu/sh4/probe.c b/arch/sh/kernel/cpu/sh4/probe.c
index d36f0c4..822977a 100644
--- a/arch/sh/kernel/cpu/sh4/probe.c
+++ b/arch/sh/kernel/cpu/sh4/probe.c
@@ -28,9 +28,9 @@
[9] = (1 << 16)
};
- pvr = (ctrl_inl(CCN_PVR) >> 8) & 0xffffff;
- prr = (ctrl_inl(CCN_PRR) >> 4) & 0xff;
- cvr = (ctrl_inl(CCN_CVR));
+ pvr = (__raw_readl(CCN_PVR) >> 8) & 0xffffff;
+ prr = (__raw_readl(CCN_PRR) >> 4) & 0xff;
+ cvr = (__raw_readl(CCN_CVR));
/*
* Setup some sane SH-4 defaults for the icache
@@ -71,11 +71,11 @@
boot_cpu_data.dcache.ways = 4;
} else {
/* And some SH-4 defaults.. */
- boot_cpu_data.flags |= CPU_HAS_PTEA;
+ boot_cpu_data.flags |= CPU_HAS_PTEA | CPU_HAS_FPU;
boot_cpu_data.family = CPU_FAMILY_SH4;
}
- /* FPU detection works for everyone */
+ /* FPU detection works for almost everyone */
if ((cvr & 0x20000000))
boot_cpu_data.flags |= CPU_HAS_FPU;
@@ -124,6 +124,7 @@
boot_cpu_data.type = CPU_SH7785;
break;
case 0x4004:
+ case 0x4005:
boot_cpu_data.type = CPU_SH7786;
boot_cpu_data.flags |= CPU_HAS_PTEAEX | CPU_HAS_L2_CACHE;
break;
@@ -160,6 +161,7 @@
break;
case 0x700:
boot_cpu_data.type = CPU_SH4_501;
+ boot_cpu_data.flags &= ~CPU_HAS_FPU;
boot_cpu_data.icache.ways = 2;
boot_cpu_data.dcache.ways = 2;
break;
@@ -227,7 +229,7 @@
* Size calculation is much more sensible
* than it is for the L1.
*
- * Sizes are 128KB, 258KB, 512KB, and 1MB.
+ * Sizes are 128KB, 256KB, 512KB, and 1MB.
*/
size = (cvr & 0xf) << 17;
diff --git a/arch/sh/kernel/cpu/sh4/setup-sh4-202.c b/arch/sh/kernel/cpu/sh4/setup-sh4-202.c
index 4b73371..b9b7e10 100644
--- a/arch/sh/kernel/cpu/sh4/setup-sh4-202.c
+++ b/arch/sh/kernel/cpu/sh4/setup-sh4-202.c
@@ -198,7 +198,7 @@
{
switch (mode) {
case IRQ_MODE_IRQ: /* individual interrupt mode for IRL3-0 */
- ctrl_outw(ctrl_inw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR);
+ __raw_writew(__raw_readw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR);
register_intc_controller(&intc_desc_irlm);
break;
default:
diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7750.c b/arch/sh/kernel/cpu/sh4/setup-sh7750.c
index b2a9df1..ffd79e5 100644
--- a/arch/sh/kernel/cpu/sh4/setup-sh7750.c
+++ b/arch/sh/kernel/cpu/sh4/setup-sh7750.c
@@ -442,7 +442,7 @@
switch (mode) {
case IRQ_MODE_IRQ: /* individual interrupt mode for IRL3-0 */
- ctrl_outw(ctrl_inw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR);
+ __raw_writew(__raw_readw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR);
register_intc_controller(&intc_desc_irlm);
break;
default:
diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7760.c b/arch/sh/kernel/cpu/sh4/setup-sh7760.c
index 5b74cc0..a16eb36 100644
--- a/arch/sh/kernel/cpu/sh4/setup-sh7760.c
+++ b/arch/sh/kernel/cpu/sh4/setup-sh7760.c
@@ -319,7 +319,7 @@
{
switch (mode) {
case IRQ_MODE_IRQ:
- ctrl_outw(ctrl_inw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR);
+ __raw_writew(__raw_readw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR);
register_intc_controller(&intc_desc_irq);
break;
default:
diff --git a/arch/sh/kernel/cpu/sh4/sq.c b/arch/sh/kernel/cpu/sh4/sq.c
index 8a8a993..fc065f9 100644
--- a/arch/sh/kernel/cpu/sh4/sq.c
+++ b/arch/sh/kernel/cpu/sh4/sq.c
@@ -43,9 +43,9 @@
#define store_queue_barrier() \
do { \
- (void)ctrl_inl(P4SEG_STORE_QUE); \
- ctrl_outl(0, P4SEG_STORE_QUE + 0); \
- ctrl_outl(0, P4SEG_STORE_QUE + 8); \
+ (void)__raw_readl(P4SEG_STORE_QUE); \
+ __raw_writel(0, P4SEG_STORE_QUE + 0); \
+ __raw_writel(0, P4SEG_STORE_QUE + 8); \
} while (0);
/**
@@ -100,7 +100,7 @@
spin_unlock_irq(&sq_mapping_lock);
}
-static int __sq_remap(struct sq_mapping *map, unsigned long flags)
+static int __sq_remap(struct sq_mapping *map, pgprot_t prot)
{
#if defined(CONFIG_MMU)
struct vm_struct *vma;
@@ -113,7 +113,7 @@
if (ioremap_page_range((unsigned long)vma->addr,
(unsigned long)vma->addr + map->size,
- vma->phys_addr, __pgprot(flags))) {
+ vma->phys_addr, prot)) {
vunmap(vma->addr);
return -EAGAIN;
}
@@ -123,8 +123,8 @@
* straightforward, as we can just load up each queue's QACR with
* the physical address appropriately masked.
*/
- ctrl_outl(((map->addr >> 26) << 2) & 0x1c, SQ_QACR0);
- ctrl_outl(((map->addr >> 26) << 2) & 0x1c, SQ_QACR1);
+ __raw_writel(((map->addr >> 26) << 2) & 0x1c, SQ_QACR0);
+ __raw_writel(((map->addr >> 26) << 2) & 0x1c, SQ_QACR1);
#endif
return 0;
@@ -135,14 +135,14 @@
* @phys: Physical address of mapping.
* @size: Length of mapping.
* @name: User invoking mapping.
- * @flags: Protection flags.
+ * @prot: Protection bits.
*
* Remaps the physical address @phys through the next available store queue
* address of @size length. @name is logged at boot time as well as through
* the sysfs interface.
*/
unsigned long sq_remap(unsigned long phys, unsigned int size,
- const char *name, unsigned long flags)
+ const char *name, pgprot_t prot)
{
struct sq_mapping *map;
unsigned long end;
@@ -177,7 +177,7 @@
map->sq_addr = P4SEG_STORE_QUE + (page << PAGE_SHIFT);
- ret = __sq_remap(map, pgprot_val(PAGE_KERNEL_NOCACHE) | flags);
+ ret = __sq_remap(map, prot);
if (unlikely(ret != 0))
goto out;
@@ -309,8 +309,7 @@
return -EIO;
if (likely(len)) {
- int ret = sq_remap(base, len, "Userspace",
- pgprot_val(PAGE_SHARED));
+ int ret = sq_remap(base, len, "Userspace", PAGE_SHARED);
if (ret < 0)
return ret;
} else
diff --git a/arch/sh/kernel/cpu/sh4a/Makefile b/arch/sh/kernel/cpu/sh4a/Makefile
index 33bab47..b144e8a 100644
--- a/arch/sh/kernel/cpu/sh4a/Makefile
+++ b/arch/sh/kernel/cpu/sh4a/Makefile
@@ -41,7 +41,8 @@
pinmux-$(CONFIG_CPU_SUBTYPE_SH7785) := pinmux-sh7785.o
pinmux-$(CONFIG_CPU_SUBTYPE_SH7786) := pinmux-sh7786.o
-obj-y += $(clock-y)
-obj-$(CONFIG_SMP) += $(smp-y)
-obj-$(CONFIG_GENERIC_GPIO) += $(pinmux-y)
-obj-$(CONFIG_PERF_EVENTS) += perf_event.o
+obj-y += $(clock-y)
+obj-$(CONFIG_SMP) += $(smp-y)
+obj-$(CONFIG_GENERIC_GPIO) += $(pinmux-y)
+obj-$(CONFIG_PERF_EVENTS) += perf_event.o
+obj-$(CONFIG_HAVE_HW_BREAKPOINT) += ubc.o
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7343.c b/arch/sh/kernel/cpu/sh4a/clock-sh7343.c
index 0ee3ee8..2c16df3 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7343.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7343.c
@@ -107,13 +107,17 @@
static int multipliers[] = { 1, 2, 1, 2, 1, 1, 1, 1, 1, 1, 1, 1, 1 };
static int divisors[] = { 1, 3, 2, 5, 3, 4, 5, 6, 8, 10, 12, 16, 20 };
-static struct clk_div_mult_table div4_table = {
+static struct clk_div_mult_table div4_div_mult_table = {
.divisors = divisors,
.nr_divisors = ARRAY_SIZE(divisors),
.multipliers = multipliers,
.nr_multipliers = ARRAY_SIZE(multipliers),
};
+static struct clk_div4_table div4_table = {
+ .div_mult_table = &div4_div_mult_table,
+};
+
enum { DIV4_I, DIV4_U, DIV4_SH, DIV4_B, DIV4_B3, DIV4_P,
DIV4_SIUA, DIV4_SIUB, DIV4_NR };
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7366.c b/arch/sh/kernel/cpu/sh4a/clock-sh7366.c
index a95ebab..91588d2 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7366.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7366.c
@@ -110,13 +110,17 @@
static int multipliers[] = { 1, 2, 1, 2, 1, 1, 1, 1, 1, 1, 1, 1, 1 };
static int divisors[] = { 1, 3, 2, 5, 3, 4, 5, 6, 8, 10, 12, 16, 20 };
-static struct clk_div_mult_table div4_table = {
+static struct clk_div_mult_table div4_div_mult_table = {
.divisors = divisors,
.nr_divisors = ARRAY_SIZE(divisors),
.multipliers = multipliers,
.nr_multipliers = ARRAY_SIZE(multipliers),
};
+static struct clk_div4_table div4_table = {
+ .div_mult_table = &div4_div_mult_table,
+};
+
enum { DIV4_I, DIV4_U, DIV4_SH, DIV4_B, DIV4_B3, DIV4_P,
DIV4_SIUA, DIV4_SIUB, DIV4_NR };
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7722.c b/arch/sh/kernel/cpu/sh4a/clock-sh7722.c
index ea38b55..15db6d5 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7722.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7722.c
@@ -110,19 +110,22 @@
static int multipliers[] = { 1, 2, 1, 2, 1, 1, 1, 1, 1, 1, 1, 1, 1 };
static int divisors[] = { 1, 3, 2, 5, 3, 4, 5, 6, 8, 10, 12, 16, 20 };
-static struct clk_div_mult_table div4_table = {
+static struct clk_div_mult_table div4_div_mult_table = {
.divisors = divisors,
.nr_divisors = ARRAY_SIZE(divisors),
.multipliers = multipliers,
.nr_multipliers = ARRAY_SIZE(multipliers),
};
-enum { DIV4_I, DIV4_U, DIV4_SH, DIV4_B, DIV4_B3, DIV4_P,
- DIV4_SIUA, DIV4_SIUB, DIV4_IRDA, DIV4_NR };
+static struct clk_div4_table div4_table = {
+ .div_mult_table = &div4_div_mult_table,
+};
#define DIV4(_str, _reg, _bit, _mask, _flags) \
SH_CLK_DIV4(_str, &pll_clk, _reg, _bit, _mask, _flags)
+enum { DIV4_I, DIV4_U, DIV4_SH, DIV4_B, DIV4_B3, DIV4_P, DIV4_NR };
+
struct clk div4_clks[DIV4_NR] = {
[DIV4_I] = DIV4("cpu_clk", FRQCR, 20, 0x1fef, CLK_ENABLE_ON_INIT),
[DIV4_U] = DIV4("umem_clk", FRQCR, 16, 0x1fff, CLK_ENABLE_ON_INIT),
@@ -130,9 +133,19 @@
[DIV4_B] = DIV4("bus_clk", FRQCR, 8, 0x1fff, CLK_ENABLE_ON_INIT),
[DIV4_B3] = DIV4("b3_clk", FRQCR, 4, 0x1fff, CLK_ENABLE_ON_INIT),
[DIV4_P] = DIV4("peripheral_clk", FRQCR, 0, 0x1fff, 0),
+};
+
+enum { DIV4_IRDA, DIV4_ENABLE_NR };
+
+struct clk div4_enable_clks[DIV4_ENABLE_NR] = {
+ [DIV4_IRDA] = DIV4("irda_clk", IRDACLKCR, 0, 0x1fff, 0),
+};
+
+enum { DIV4_SIUA, DIV4_SIUB, DIV4_REPARENT_NR };
+
+struct clk div4_reparent_clks[DIV4_REPARENT_NR] = {
[DIV4_SIUA] = DIV4("siua_clk", SCLKACR, 0, 0x1fff, 0),
[DIV4_SIUB] = DIV4("siub_clk", SCLKBCR, 0, 0x1fff, 0),
- [DIV4_IRDA] = DIV4("irda_clk", IRDACLKCR, 0, 0x1fff, 0),
};
struct clk div6_clks[] = {
@@ -189,6 +202,14 @@
ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
if (!ret)
+ ret = sh_clk_div4_enable_register(div4_enable_clks,
+ DIV4_ENABLE_NR, &div4_table);
+
+ if (!ret)
+ ret = sh_clk_div4_reparent_register(div4_reparent_clks,
+ DIV4_REPARENT_NR, &div4_table);
+
+ if (!ret)
ret = sh_clk_div6_register(div6_clks, ARRAY_SIZE(div6_clks));
if (!ret)
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7723.c b/arch/sh/kernel/cpu/sh4a/clock-sh7723.c
index 20a31c2..50babe0 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7723.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7723.c
@@ -110,15 +110,18 @@
static int multipliers[] = { 1, 2, 1, 2, 1, 1, 1, 1, 1, 1, 1, 1, 1 };
static int divisors[] = { 1, 3, 2, 5, 3, 4, 5, 6, 8, 10, 12, 16, 20 };
-static struct clk_div_mult_table div4_table = {
+static struct clk_div_mult_table div4_div_mult_table = {
.divisors = divisors,
.nr_divisors = ARRAY_SIZE(divisors),
.multipliers = multipliers,
.nr_multipliers = ARRAY_SIZE(multipliers),
};
-enum { DIV4_I, DIV4_U, DIV4_SH, DIV4_B, DIV4_B3, DIV4_P,
- DIV4_SIUA, DIV4_SIUB, DIV4_IRDA, DIV4_NR };
+static struct clk_div4_table div4_table = {
+ .div_mult_table = &div4_div_mult_table,
+};
+
+enum { DIV4_I, DIV4_U, DIV4_SH, DIV4_B, DIV4_B3, DIV4_P, DIV4_NR };
#define DIV4(_str, _reg, _bit, _mask, _flags) \
SH_CLK_DIV4(_str, &pll_clk, _reg, _bit, _mask, _flags)
@@ -130,11 +133,20 @@
[DIV4_B] = DIV4("bus_clk", FRQCR, 8, 0x0dbf, CLK_ENABLE_ON_INIT),
[DIV4_B3] = DIV4("b3_clk", FRQCR, 4, 0x0db4, CLK_ENABLE_ON_INIT),
[DIV4_P] = DIV4("peripheral_clk", FRQCR, 0, 0x0dbf, 0),
- [DIV4_SIUA] = DIV4("siua_clk", SCLKACR, 0, 0x0dbf, 0),
- [DIV4_SIUB] = DIV4("siub_clk", SCLKBCR, 0, 0x0dbf, 0),
+};
+
+enum { DIV4_IRDA, DIV4_ENABLE_NR };
+
+struct clk div4_enable_clks[DIV4_ENABLE_NR] = {
[DIV4_IRDA] = DIV4("irda_clk", IRDACLKCR, 0, 0x0dbf, 0),
};
+enum { DIV4_SIUA, DIV4_SIUB, DIV4_REPARENT_NR };
+
+struct clk div4_reparent_clks[DIV4_REPARENT_NR] = {
+ [DIV4_SIUA] = DIV4("siua_clk", SCLKACR, 0, 0x0dbf, 0),
+ [DIV4_SIUB] = DIV4("siub_clk", SCLKBCR, 0, 0x0dbf, 0),
+};
struct clk div6_clks[] = {
SH_CLK_DIV6("video_clk", &pll_clk, VCLKCR, 0),
};
@@ -216,6 +228,14 @@
ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
if (!ret)
+ ret = sh_clk_div4_enable_register(div4_enable_clks,
+ DIV4_ENABLE_NR, &div4_table);
+
+ if (!ret)
+ ret = sh_clk_div4_reparent_register(div4_reparent_clks,
+ DIV4_REPARENT_NR, &div4_table);
+
+ if (!ret)
ret = sh_clk_div6_register(div6_clks, ARRAY_SIZE(div6_clks));
if (!ret)
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c
index 9db7438..6707061 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c
@@ -127,13 +127,28 @@
&div3_clk,
};
+static void div4_kick(struct clk *clk)
+{
+ unsigned long value;
+
+ /* set KICK bit in FRQCRA to update hardware setting */
+ value = __raw_readl(FRQCRA);
+ value |= (1 << 31);
+ __raw_writel(value, FRQCRA);
+}
+
static int divisors[] = { 2, 3, 4, 6, 8, 12, 16, 0, 24, 32, 36, 48, 0, 72 };
-static struct clk_div_mult_table div4_table = {
+static struct clk_div_mult_table div4_div_mult_table = {
.divisors = divisors,
.nr_divisors = ARRAY_SIZE(divisors),
};
+static struct clk_div4_table div4_table = {
+ .div_mult_table = &div4_div_mult_table,
+ .kick = div4_kick,
+};
+
enum { DIV4_I, DIV4_SH, DIV4_B, DIV4_P, DIV4_M1, DIV4_NR };
#define DIV4(_str, _reg, _bit, _mask, _flags) \
@@ -144,7 +159,7 @@
[DIV4_SH] = DIV4("shyway_clk", FRQCRA, 12, 0x2f7c, CLK_ENABLE_ON_INIT),
[DIV4_B] = DIV4("bus_clk", FRQCRA, 8, 0x2f7c, CLK_ENABLE_ON_INIT),
[DIV4_P] = DIV4("peripheral_clk", FRQCRA, 0, 0x2f7c, 0),
- [DIV4_M1] = DIV4("vpu_clk", FRQCRB, 4, 0x2f7c, 0),
+ [DIV4_M1] = DIV4("vpu_clk", FRQCRB, 4, 0x2f7c, CLK_ENABLE_ON_INIT),
};
struct clk div6_clks[] = {
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7757.c b/arch/sh/kernel/cpu/sh4a/clock-sh7757.c
index ddc235c..86aae60 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7757.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7757.c
@@ -35,7 +35,7 @@
static void module_clk_recalc(struct clk *clk)
{
- int idx = ctrl_inl(FRQCR) & 0x0000000f;
+ int idx = __raw_readl(FRQCR) & 0x0000000f;
clk->rate = clk->parent->rate / p1fc_divisors[idx];
}
@@ -45,7 +45,7 @@
static void bus_clk_recalc(struct clk *clk)
{
- int idx = (ctrl_inl(FRQCR) >> 8) & 0x0000000f;
+ int idx = (__raw_readl(FRQCR) >> 8) & 0x0000000f;
clk->rate = clk->parent->rate / bfc_divisors[idx];
}
@@ -55,7 +55,7 @@
static void cpu_clk_recalc(struct clk *clk)
{
- int idx = (ctrl_inl(FRQCR) >> 20) & 0x0000000f;
+ int idx = (__raw_readl(FRQCR) >> 20) & 0x0000000f;
clk->rate = clk->parent->rate / ifc_divisors[idx];
}
@@ -78,7 +78,7 @@
static void shyway_clk_recalc(struct clk *clk)
{
- int idx = (ctrl_inl(FRQCR) >> 12) & 0x0000000f;
+ int idx = (__raw_readl(FRQCR) >> 12) & 0x0000000f;
clk->rate = clk->parent->rate / sfc_divisors[idx];
}
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7763.c b/arch/sh/kernel/cpu/sh4a/clock-sh7763.c
index 370cd47..9f40116 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7763.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7763.c
@@ -22,7 +22,7 @@
static void master_clk_init(struct clk *clk)
{
- clk->rate *= p0fc_divisors[(ctrl_inl(FRQCR) >> 4) & 0x07];
+ clk->rate *= p0fc_divisors[(__raw_readl(FRQCR) >> 4) & 0x07];
}
static struct clk_ops sh7763_master_clk_ops = {
@@ -31,7 +31,7 @@
static unsigned long module_clk_recalc(struct clk *clk)
{
- int idx = ((ctrl_inl(FRQCR) >> 4) & 0x07);
+ int idx = ((__raw_readl(FRQCR) >> 4) & 0x07);
return clk->parent->rate / p0fc_divisors[idx];
}
@@ -41,7 +41,7 @@
static unsigned long bus_clk_recalc(struct clk *clk)
{
- int idx = ((ctrl_inl(FRQCR) >> 16) & 0x07);
+ int idx = ((__raw_readl(FRQCR) >> 16) & 0x07);
return clk->parent->rate / bfc_divisors[idx];
}
@@ -68,7 +68,7 @@
static unsigned long shyway_clk_recalc(struct clk *clk)
{
- int idx = ((ctrl_inl(FRQCR) >> 20) & 0x07);
+ int idx = ((__raw_readl(FRQCR) >> 20) & 0x07);
return clk->parent->rate / cfc_divisors[idx];
}
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7770.c b/arch/sh/kernel/cpu/sh4a/clock-sh7770.c
index e0b8967..9e33543 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7770.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7770.c
@@ -21,7 +21,7 @@
static void master_clk_init(struct clk *clk)
{
- clk->rate *= pfc_divisors[(ctrl_inl(FRQCR) >> 28) & 0x000f];
+ clk->rate *= pfc_divisors[(__raw_readl(FRQCR) >> 28) & 0x000f];
}
static struct clk_ops sh7770_master_clk_ops = {
@@ -30,7 +30,7 @@
static unsigned long module_clk_recalc(struct clk *clk)
{
- int idx = ((ctrl_inl(FRQCR) >> 28) & 0x000f);
+ int idx = ((__raw_readl(FRQCR) >> 28) & 0x000f);
return clk->parent->rate / pfc_divisors[idx];
}
@@ -40,7 +40,7 @@
static unsigned long bus_clk_recalc(struct clk *clk)
{
- int idx = (ctrl_inl(FRQCR) & 0x000f);
+ int idx = (__raw_readl(FRQCR) & 0x000f);
return clk->parent->rate / bfc_divisors[idx];
}
@@ -50,7 +50,7 @@
static unsigned long cpu_clk_recalc(struct clk *clk)
{
- int idx = ((ctrl_inl(FRQCR) >> 24) & 0x000f);
+ int idx = ((__raw_readl(FRQCR) >> 24) & 0x000f);
return clk->parent->rate / ifc_divisors[idx];
}
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7780.c b/arch/sh/kernel/cpu/sh4a/clock-sh7780.c
index a249d82..150963a 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7780.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7780.c
@@ -22,7 +22,7 @@
static void master_clk_init(struct clk *clk)
{
- clk->rate *= pfc_divisors[ctrl_inl(FRQCR) & 0x0003];
+ clk->rate *= pfc_divisors[__raw_readl(FRQCR) & 0x0003];
}
static struct clk_ops sh7780_master_clk_ops = {
@@ -31,7 +31,7 @@
static unsigned long module_clk_recalc(struct clk *clk)
{
- int idx = (ctrl_inl(FRQCR) & 0x0003);
+ int idx = (__raw_readl(FRQCR) & 0x0003);
return clk->parent->rate / pfc_divisors[idx];
}
@@ -41,7 +41,7 @@
static unsigned long bus_clk_recalc(struct clk *clk)
{
- int idx = ((ctrl_inl(FRQCR) >> 16) & 0x0007);
+ int idx = ((__raw_readl(FRQCR) >> 16) & 0x0007);
return clk->parent->rate / bfc_divisors[idx];
}
@@ -51,7 +51,7 @@
static unsigned long cpu_clk_recalc(struct clk *clk)
{
- int idx = ((ctrl_inl(FRQCR) >> 24) & 0x0001);
+ int idx = ((__raw_readl(FRQCR) >> 24) & 0x0001);
return clk->parent->rate / ifc_divisors[idx];
}
@@ -74,7 +74,7 @@
static unsigned long shyway_clk_recalc(struct clk *clk)
{
- int idx = ((ctrl_inl(FRQCR) >> 20) & 0x0007);
+ int idx = ((__raw_readl(FRQCR) >> 20) & 0x0007);
return clk->parent->rate / cfc_divisors[idx];
}
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7785.c b/arch/sh/kernel/cpu/sh4a/clock-sh7785.c
index 73abfbf..d997f0a 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7785.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7785.c
@@ -57,11 +57,15 @@
static unsigned int div2[] = { 1, 2, 4, 6, 8, 12, 16, 18,
24, 32, 36, 48 };
-static struct clk_div_mult_table div4_table = {
+static struct clk_div_mult_table div4_div_mult_table = {
.divisors = div2,
.nr_divisors = ARRAY_SIZE(div2),
};
+static struct clk_div4_table div4_table = {
+ .div_mult_table = &div4_div_mult_table,
+};
+
enum { DIV4_I, DIV4_U, DIV4_SH, DIV4_B, DIV4_DDR, DIV4_GA,
DIV4_DU, DIV4_P, DIV4_NR };
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7786.c b/arch/sh/kernel/cpu/sh4a/clock-sh7786.c
index a0e8869..af69fd4 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7786.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7786.c
@@ -3,11 +3,7 @@
*
* SH7786 support for the clock framework
*
- * Copyright (C) 2008, 2009 Renesas Solutions Corp.
- * Kuninori Morimoto <morimoto.kuninori@renesas.com>
- *
- * Based on SH7785
- * Copyright (C) 2007 Paul Mundt
+ * Copyright (C) 2010 Paul Mundt
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
@@ -15,127 +11,127 @@
*/
#include <linux/init.h>
#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/io.h>
#include <asm/clock.h>
#include <asm/freq.h>
-#include <asm/io.h>
-
-static int ifc_divisors[] = { 1, 2, 4, 1 };
-static int sfc_divisors[] = { 1, 1, 4, 1 };
-static int bfc_divisors[] = { 1, 1, 1, 1, 1, 12, 16, 1,
- 24, 32, 1, 1, 1, 1, 1, 1 };
-static int mfc_divisors[] = { 1, 1, 4, 1 };
-static int pfc_divisors[] = { 1, 1, 1, 1, 1, 1, 16, 1,
- 24, 32, 1, 48, 1, 1, 1, 1 };
-
-static void master_clk_init(struct clk *clk)
-{
- clk->rate *= pfc_divisors[ctrl_inl(FRQMR1) & 0x000f];
-}
-
-static struct clk_ops sh7786_master_clk_ops = {
- .init = master_clk_init,
-};
-
-static unsigned long module_clk_recalc(struct clk *clk)
-{
- int idx = (ctrl_inl(FRQMR1) & 0x000f);
- return clk->parent->rate / pfc_divisors[idx];
-}
-
-static struct clk_ops sh7786_module_clk_ops = {
- .recalc = module_clk_recalc,
-};
-
-static unsigned long bus_clk_recalc(struct clk *clk)
-{
- int idx = ((ctrl_inl(FRQMR1) >> 16) & 0x000f);
- return clk->parent->rate / bfc_divisors[idx];
-}
-
-static struct clk_ops sh7786_bus_clk_ops = {
- .recalc = bus_clk_recalc,
-};
-
-static unsigned long cpu_clk_recalc(struct clk *clk)
-{
- int idx = ((ctrl_inl(FRQMR1) >> 28) & 0x0003);
- return clk->parent->rate / ifc_divisors[idx];
-}
-
-static struct clk_ops sh7786_cpu_clk_ops = {
- .recalc = cpu_clk_recalc,
-};
-
-static struct clk_ops *sh7786_clk_ops[] = {
- &sh7786_master_clk_ops,
- &sh7786_module_clk_ops,
- &sh7786_bus_clk_ops,
- &sh7786_cpu_clk_ops,
-};
-
-void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
-{
- if (idx < ARRAY_SIZE(sh7786_clk_ops))
- *ops = sh7786_clk_ops[idx];
-}
-
-static unsigned long shyway_clk_recalc(struct clk *clk)
-{
- int idx = ((ctrl_inl(FRQMR1) >> 20) & 0x0003);
- return clk->parent->rate / sfc_divisors[idx];
-}
-
-static struct clk_ops sh7786_shyway_clk_ops = {
- .recalc = shyway_clk_recalc,
-};
-
-static struct clk sh7786_shyway_clk = {
- .name = "shyway_clk",
- .flags = CLK_ENABLE_ON_INIT,
- .ops = &sh7786_shyway_clk_ops,
-};
-
-static unsigned long ddr_clk_recalc(struct clk *clk)
-{
- int idx = ((ctrl_inl(FRQMR1) >> 12) & 0x0003);
- return clk->parent->rate / mfc_divisors[idx];
-}
-
-static struct clk_ops sh7786_ddr_clk_ops = {
- .recalc = ddr_clk_recalc,
-};
-
-static struct clk sh7786_ddr_clk = {
- .name = "ddr_clk",
- .flags = CLK_ENABLE_ON_INIT,
- .ops = &sh7786_ddr_clk_ops,
-};
/*
- * Additional SH7786-specific on-chip clocks that aren't already part of the
- * clock framework
+ * Default rate for the root input clock, reset this with clk_set_rate()
+ * from the platform code.
*/
-static struct clk *sh7786_onchip_clocks[] = {
- &sh7786_shyway_clk,
- &sh7786_ddr_clk,
+static struct clk extal_clk = {
+ .name = "extal",
+ .id = -1,
+ .rate = 33333333,
+};
+
+static unsigned long pll_recalc(struct clk *clk)
+{
+ int multiplier;
+
+ /*
+ * Clock modes 0, 1, and 2 use an x64 multiplier against PLL1,
+ * while modes 3, 4, and 5 use an x32.
+ */
+ multiplier = (sh_mv.mv_mode_pins() & 0xf) < 3 ? 64 : 32;
+
+ return clk->parent->rate * multiplier;
+}
+
+static struct clk_ops pll_clk_ops = {
+ .recalc = pll_recalc,
+};
+
+static struct clk pll_clk = {
+ .name = "pll_clk",
+ .id = -1,
+ .ops = &pll_clk_ops,
+ .parent = &extal_clk,
+ .flags = CLK_ENABLE_ON_INIT,
+};
+
+static struct clk *clks[] = {
+ &extal_clk,
+ &pll_clk,
+};
+
+static unsigned int div2[] = { 1, 2, 4, 6, 8, 12, 16, 18,
+ 24, 32, 36, 48 };
+
+static struct clk_div_mult_table div4_div_mult_table = {
+ .divisors = div2,
+ .nr_divisors = ARRAY_SIZE(div2),
+};
+
+static struct clk_div4_table div4_table = {
+ .div_mult_table = &div4_div_mult_table,
+};
+
+enum { DIV4_I, DIV4_SH, DIV4_B, DIV4_DDR, DIV4_DU, DIV4_P, DIV4_NR };
+
+#define DIV4(_str, _bit, _mask, _flags) \
+ SH_CLK_DIV4(_str, &pll_clk, FRQMR1, _bit, _mask, _flags)
+
+struct clk div4_clks[DIV4_NR] = {
+ [DIV4_P] = DIV4("peripheral_clk", 0, 0x0b40, 0),
+ [DIV4_DU] = DIV4("du_clk", 4, 0x0010, 0),
+ [DIV4_DDR] = DIV4("ddr_clk", 12, 0x0002, CLK_ENABLE_ON_INIT),
+ [DIV4_B] = DIV4("bus_clk", 16, 0x0360, CLK_ENABLE_ON_INIT),
+ [DIV4_SH] = DIV4("shyway_clk", 20, 0x0002, CLK_ENABLE_ON_INIT),
+ [DIV4_I] = DIV4("cpu_clk", 28, 0x0006, CLK_ENABLE_ON_INIT),
+};
+
+#define MSTPCR0 0xffc40030
+#define MSTPCR1 0xffc40034
+
+static struct clk mstp_clks[] = {
+ /* MSTPCR0 */
+ SH_CLK_MSTP32("scif_fck", 5, &div4_clks[DIV4_P], MSTPCR0, 29, 0),
+ SH_CLK_MSTP32("scif_fck", 4, &div4_clks[DIV4_P], MSTPCR0, 28, 0),
+ SH_CLK_MSTP32("scif_fck", 3, &div4_clks[DIV4_P], MSTPCR0, 27, 0),
+ SH_CLK_MSTP32("scif_fck", 2, &div4_clks[DIV4_P], MSTPCR0, 26, 0),
+ SH_CLK_MSTP32("scif_fck", 1, &div4_clks[DIV4_P], MSTPCR0, 25, 0),
+ SH_CLK_MSTP32("scif_fck", 0, &div4_clks[DIV4_P], MSTPCR0, 24, 0),
+ SH_CLK_MSTP32("ssi_fck", 3, &div4_clks[DIV4_P], MSTPCR0, 23, 0),
+ SH_CLK_MSTP32("ssi_fck", 2, &div4_clks[DIV4_P], MSTPCR0, 22, 0),
+ SH_CLK_MSTP32("ssi_fck", 1, &div4_clks[DIV4_P], MSTPCR0, 21, 0),
+ SH_CLK_MSTP32("ssi_fck", 0, &div4_clks[DIV4_P], MSTPCR0, 20, 0),
+ SH_CLK_MSTP32("hac_fck", 1, &div4_clks[DIV4_P], MSTPCR0, 17, 0),
+ SH_CLK_MSTP32("hac_fck", 0, &div4_clks[DIV4_P], MSTPCR0, 16, 0),
+ SH_CLK_MSTP32("i2c_fck", 1, &div4_clks[DIV4_P], MSTPCR0, 15, 0),
+ SH_CLK_MSTP32("i2c_fck", 0, &div4_clks[DIV4_P], MSTPCR0, 14, 0),
+ SH_CLK_MSTP32("tmu9_11_fck", -1, &div4_clks[DIV4_P], MSTPCR0, 11, 0),
+ SH_CLK_MSTP32("tmu678_fck", -1, &div4_clks[DIV4_P], MSTPCR0, 10, 0),
+ SH_CLK_MSTP32("tmu345_fck", -1, &div4_clks[DIV4_P], MSTPCR0, 9, 0),
+ SH_CLK_MSTP32("tmu012_fck", -1, &div4_clks[DIV4_P], MSTPCR0, 8, 0),
+ SH_CLK_MSTP32("sdif_fck", 1, &div4_clks[DIV4_P], MSTPCR0, 5, 0),
+ SH_CLK_MSTP32("sdif_fck", 0, &div4_clks[DIV4_P], MSTPCR0, 4, 0),
+ SH_CLK_MSTP32("hspi_fck", -1, &div4_clks[DIV4_P], MSTPCR0, 2, 0),
+
+ /* MSTPCR1 */
+ SH_CLK_MSTP32("usb_fck", -1, NULL, MSTPCR1, 12, 0),
+ SH_CLK_MSTP32("pcie_fck", 2, NULL, MSTPCR1, 10, 0),
+ SH_CLK_MSTP32("pcie_fck", 1, NULL, MSTPCR1, 9, 0),
+ SH_CLK_MSTP32("pcie_fck", 0, NULL, MSTPCR1, 8, 0),
+ SH_CLK_MSTP32("dmac_11_6_fck", -1, NULL, MSTPCR1, 5, 0),
+ SH_CLK_MSTP32("dmac_5_0_fck", -1, NULL, MSTPCR1, 4, 0),
+ SH_CLK_MSTP32("du_fck", -1, NULL, MSTPCR1, 3, 0),
+ SH_CLK_MSTP32("ether_fck", -1, NULL, MSTPCR1, 2, 0),
};
int __init arch_clk_init(void)
{
- struct clk *clk;
int i, ret = 0;
- cpg_clk_init();
+ for (i = 0; i < ARRAY_SIZE(clks); i++)
+ ret |= clk_register(clks[i]);
- clk = clk_get(NULL, "master_clk");
- for (i = 0; i < ARRAY_SIZE(sh7786_onchip_clocks); i++) {
- struct clk *clkp = sh7786_onchip_clocks[i];
-
- clkp->parent = clk;
- ret |= clk_register(clkp);
- }
-
- clk_put(clk);
+ if (!ret)
+ ret = sh_clk_div4_register(div4_clks, ARRAY_SIZE(div4_clks),
+ &div4_table);
+ if (!ret)
+ ret = sh_clk_mstp32_register(mstp_clks, ARRAY_SIZE(mstp_clks));
return ret;
}
diff --git a/arch/sh/kernel/cpu/sh4a/clock-shx3.c b/arch/sh/kernel/cpu/sh4a/clock-shx3.c
index 23c27d3..e75c57b 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-shx3.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-shx3.c
@@ -33,7 +33,7 @@
static void master_clk_init(struct clk *clk)
{
- clk->rate *= pfc_divisors[(ctrl_inl(FRQCR) >> PFC_POS) & PFC_MSK];
+ clk->rate *= pfc_divisors[(__raw_readl(FRQCR) >> PFC_POS) & PFC_MSK];
}
static struct clk_ops shx3_master_clk_ops = {
@@ -42,7 +42,7 @@
static unsigned long module_clk_recalc(struct clk *clk)
{
- int idx = ((ctrl_inl(FRQCR) >> PFC_POS) & PFC_MSK);
+ int idx = ((__raw_readl(FRQCR) >> PFC_POS) & PFC_MSK);
return clk->parent->rate / pfc_divisors[idx];
}
@@ -52,7 +52,7 @@
static unsigned long bus_clk_recalc(struct clk *clk)
{
- int idx = ((ctrl_inl(FRQCR) >> BFC_POS) & BFC_MSK);
+ int idx = ((__raw_readl(FRQCR) >> BFC_POS) & BFC_MSK);
return clk->parent->rate / bfc_divisors[idx];
}
@@ -62,7 +62,7 @@
static unsigned long cpu_clk_recalc(struct clk *clk)
{
- int idx = ((ctrl_inl(FRQCR) >> IFC_POS) & IFC_MSK);
+ int idx = ((__raw_readl(FRQCR) >> IFC_POS) & IFC_MSK);
return clk->parent->rate / ifc_divisors[idx];
}
@@ -85,7 +85,7 @@
static unsigned long shyway_clk_recalc(struct clk *clk)
{
- int idx = ((ctrl_inl(FRQCR) >> CFC_POS) & CFC_MSK);
+ int idx = ((__raw_readl(FRQCR) >> CFC_POS) & CFC_MSK);
return clk->parent->rate / cfc_divisors[idx];
}
diff --git a/arch/sh/kernel/cpu/sh4a/pinmux-sh7722.c b/arch/sh/kernel/cpu/sh4a/pinmux-sh7722.c
index cb9d07b..0688a750 100644
--- a/arch/sh/kernel/cpu/sh4a/pinmux-sh7722.c
+++ b/arch/sh/kernel/cpu/sh4a/pinmux-sh7722.c
@@ -278,6 +278,7 @@
HIZA8_LCDC, HIZA8_HIZ,
HIZA7_LCDC, HIZA7_HIZ,
HIZA6_LCDC, HIZA6_HIZ,
+ HIZB4_SIUA, HIZB4_HIZ,
HIZB1_VIO, HIZB1_HIZ,
HIZB0_VIO, HIZB0_HIZ,
HIZC15_IRQ7, HIZC15_HIZ,
@@ -546,7 +547,7 @@
PINMUX_DATA(VIO_VD2_MARK, PSE3_VIO, MSELB9_VIO2,
HIZB0_VIO, FOE_VIO_VD2),
PINMUX_DATA(VIO_HD2_MARK, PSE3_VIO, MSELB9_VIO2,
- HIZB1_VIO, HIZB1_VIO, FCE_VIO_HD2),
+ HIZB1_VIO, FCE_VIO_HD2),
PINMUX_DATA(VIO_CLK2_MARK, PSE3_VIO, MSELB9_VIO2,
HIZB1_VIO, FRB_VIO_CLK2),
@@ -658,14 +659,14 @@
PINMUX_DATA(SDHICLK_MARK, SDHICLK),
/* SIU - Port A */
- PINMUX_DATA(SIUAOLR_MARK, PSC13_SIUAOLR, SIUAOLR_SIOF1_SYNC),
- PINMUX_DATA(SIUAOBT_MARK, PSC14_SIUAOBT, SIUAOBT_SIOF1_SCK),
- PINMUX_DATA(SIUAISLD_MARK, PSC15_SIUAISLD, SIUAISLD_SIOF1_RXD),
- PINMUX_DATA(SIUAILR_MARK, PSC11_SIUAILR, SIUAILR_SIOF1_SS2),
- PINMUX_DATA(SIUAIBT_MARK, PSC12_SIUAIBT, SIUAIBT_SIOF1_SS1),
- PINMUX_DATA(SIUAOSLD_MARK, PSB0_SIUAOSLD, SIUAOSLD_SIOF1_TXD),
- PINMUX_DATA(SIUMCKA_MARK, PSE11_SIUMCKA_SIOF1_MCK, PSB1_SIUMCKA, PTK0),
- PINMUX_DATA(SIUFCKA_MARK, PSE11_SIUFCKA, PTK0),
+ PINMUX_DATA(SIUAOLR_MARK, PSC13_SIUAOLR, HIZB4_SIUA, SIUAOLR_SIOF1_SYNC),
+ PINMUX_DATA(SIUAOBT_MARK, PSC14_SIUAOBT, HIZB4_SIUA, SIUAOBT_SIOF1_SCK),
+ PINMUX_DATA(SIUAISLD_MARK, PSC15_SIUAISLD, HIZB4_SIUA, SIUAISLD_SIOF1_RXD),
+ PINMUX_DATA(SIUAILR_MARK, PSC11_SIUAILR, HIZB4_SIUA, SIUAILR_SIOF1_SS2),
+ PINMUX_DATA(SIUAIBT_MARK, PSC12_SIUAIBT, HIZB4_SIUA, SIUAIBT_SIOF1_SS1),
+ PINMUX_DATA(SIUAOSLD_MARK, PSB0_SIUAOSLD, HIZB4_SIUA, SIUAOSLD_SIOF1_TXD),
+ PINMUX_DATA(SIUMCKA_MARK, PSE11_SIUMCKA_SIOF1_MCK, HIZB4_SIUA, PSB1_SIUMCKA, PTK0),
+ PINMUX_DATA(SIUFCKA_MARK, PSE11_SIUFCKA, HIZB4_SIUA, PTK0),
/* SIU - Port B */
PINMUX_DATA(SIUBOLR_MARK, PSB11_SIUBOLR, SIOSTRB1_SIUBOLR),
@@ -1612,7 +1613,7 @@
0, 0,
0, 0,
0, 0,
- 0, 0,
+ HIZB4_SIUA, HIZB4_HIZ,
0, 0,
0, 0,
HIZB1_VIO, HIZB1_HIZ,
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
index b5335b5..ef3f978 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
@@ -446,6 +446,8 @@
enum {
UNUSED=0,
+ ENABLED,
+ DISABLED,
/* interrupt sources */
IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
@@ -461,7 +463,6 @@
SCIF0, SCIF1, SCIF2, SIOF0, SIOF1, SIO,
FLCTL_FLSTEI, FLCTL_FLENDI, FLCTL_FLTREQ0I, FLCTL_FLTREQ1I,
I2C_ALI, I2C_TACKI, I2C_WAITI, I2C_DTEI,
- SDHI0, SDHI1, SDHI2, SDHI3,
CMT, TSIF, SIU, TWODG,
TMU0, TMU1, TMU2,
IRDA, JPU, LCDC,
@@ -494,8 +495,8 @@
INTC_VECT(FLCTL_FLTREQ0I, 0xdc0), INTC_VECT(FLCTL_FLTREQ1I, 0xde0),
INTC_VECT(I2C_ALI, 0xe00), INTC_VECT(I2C_TACKI, 0xe20),
INTC_VECT(I2C_WAITI, 0xe40), INTC_VECT(I2C_DTEI, 0xe60),
- INTC_VECT(SDHI0, 0xe80), INTC_VECT(SDHI1, 0xea0),
- INTC_VECT(SDHI2, 0xec0), INTC_VECT(SDHI3, 0xee0),
+ INTC_VECT(SDHI, 0xe80), INTC_VECT(SDHI, 0xea0),
+ INTC_VECT(SDHI, 0xec0), INTC_VECT(SDHI, 0xee0),
INTC_VECT(CMT, 0xf00), INTC_VECT(TSIF, 0xf20),
INTC_VECT(SIU, 0xf80), INTC_VECT(TWODG, 0xfa0),
INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
@@ -513,7 +514,6 @@
INTC_GROUP(FLCTL, FLCTL_FLSTEI, FLCTL_FLENDI,
FLCTL_FLTREQ0I, FLCTL_FLTREQ1I),
INTC_GROUP(I2C, I2C_ALI, I2C_TACKI, I2C_WAITI, I2C_DTEI),
- INTC_GROUP(SDHI, SDHI0, SDHI1, SDHI2, SDHI3),
};
static struct intc_mask_reg mask_registers[] __initdata = {
@@ -535,7 +535,7 @@
{ I2C_DTEI, I2C_WAITI, I2C_TACKI, I2C_ALI,
FLCTL_FLTREQ1I, FLCTL_FLTREQ0I, FLCTL_FLENDI, FLCTL_FLSTEI } },
{ 0xa40800a0, 0xa40800e0, 8, /* IMR8 / IMCR8 */
- { SDHI3, SDHI2, SDHI1, SDHI0, 0, 0, TWODG, SIU } },
+ { DISABLED, DISABLED, ENABLED, ENABLED, 0, 0, TWODG, SIU } },
{ 0xa40800a4, 0xa40800e4, 8, /* IMR9 / IMCR9 */
{ 0, 0, 0, CMT, 0, USB_USBI1, USB_USBI0, } },
{ 0xa40800a8, 0xa40800e8, 8, /* IMR10 / IMCR10 */
@@ -573,9 +573,13 @@
{ IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
};
-static DECLARE_INTC_DESC_ACK(intc_desc, "sh7722", vectors, groups,
- mask_registers, prio_registers, sense_registers,
- ack_registers);
+static struct intc_desc intc_desc __initdata = {
+ .name = "sh7722",
+ .force_enable = ENABLED,
+ .force_disable = DISABLED,
+ .hw = INTC_HW_DESC(vectors, groups, mask_registers,
+ prio_registers, sense_registers, ack_registers),
+};
void __init plat_irq_setup(void)
{
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
index 772b926..85c61f6 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
@@ -592,14 +592,17 @@
#define RAMCR_CACHE_L2FC 0x0002
#define RAMCR_CACHE_L2E 0x0001
#define L2_CACHE_ENABLE (RAMCR_CACHE_L2E|RAMCR_CACHE_L2FC)
-void __uses_jump_to_uncached l2_cache_init(void)
+
+void l2_cache_init(void)
{
/* Enable L2 cache */
- ctrl_outl(L2_CACHE_ENABLE, RAMCR);
+ __raw_writel(L2_CACHE_ENABLE, RAMCR);
}
enum {
UNUSED=0,
+ ENABLED,
+ DISABLED,
/* interrupt sources */
IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
@@ -622,7 +625,6 @@
SCIFA_SCIFA1,
FLCTL_FLSTEI,FLCTL_FLTENDI,FLCTL_FLTREQ0I,FLCTL_FLTREQ1I,
I2C_ALI,I2C_TACKI,I2C_WAITI,I2C_DTEI,
- SDHI0_SDHII0,SDHI0_SDHII1,SDHI0_SDHII2,
CMT_CMTI,
TSIF_TSIFI,
SIU_SIUI,
@@ -630,7 +632,6 @@
TMU0_TUNI0, TMU0_TUNI1, TMU0_TUNI2,
IRDA_IRDAI,
ATAPI_ATAPII,
- SDHI1_SDHII0,SDHI1_SDHII1,SDHI1_SDHII2,
VEU2H1_VEU2HI,
LCDC_LCDCI,
TMU1_TUNI0,TMU1_TUNI1,TMU1_TUNI2,
@@ -701,9 +702,9 @@
INTC_VECT(I2C_WAITI,0xE40),
INTC_VECT(I2C_DTEI,0xE60),
- INTC_VECT(SDHI0_SDHII0,0xE80),
- INTC_VECT(SDHI0_SDHII1,0xEA0),
- INTC_VECT(SDHI0_SDHII2,0xEC0),
+ INTC_VECT(SDHI0, 0xE80),
+ INTC_VECT(SDHI0, 0xEA0),
+ INTC_VECT(SDHI0, 0xEC0),
INTC_VECT(CMT_CMTI,0xF00),
INTC_VECT(TSIF_TSIFI,0xF20),
@@ -717,9 +718,9 @@
INTC_VECT(IRDA_IRDAI,0x480),
INTC_VECT(ATAPI_ATAPII,0x4A0),
- INTC_VECT(SDHI1_SDHII0,0x4E0),
- INTC_VECT(SDHI1_SDHII1,0x500),
- INTC_VECT(SDHI1_SDHII2,0x520),
+ INTC_VECT(SDHI1, 0x4E0),
+ INTC_VECT(SDHI1, 0x500),
+ INTC_VECT(SDHI1, 0x520),
INTC_VECT(VEU2H1_VEU2HI,0x560),
INTC_VECT(LCDC_LCDCI,0x580),
@@ -738,15 +739,14 @@
INTC_GROUP(FLCTL,FLCTL_FLSTEI,FLCTL_FLTENDI,FLCTL_FLTREQ0I,FLCTL_FLTREQ1I),
INTC_GROUP(I2C,I2C_ALI,I2C_TACKI,I2C_WAITI,I2C_DTEI),
INTC_GROUP(_2DG, _2DG_TRI,_2DG_INI,_2DG_CEI),
- INTC_GROUP(SDHI1, SDHI1_SDHII0,SDHI1_SDHII1,SDHI1_SDHII2),
INTC_GROUP(RTC, RTC_ATI,RTC_PRI,RTC_CUI),
INTC_GROUP(DMAC1B, DMAC1B_DEI4,DMAC1B_DEI5,DMAC1B_DADERR),
- INTC_GROUP(SDHI0,SDHI0_SDHII0,SDHI0_SDHII1,SDHI0_SDHII2),
};
static struct intc_mask_reg mask_registers[] __initdata = {
{ 0xa4080080, 0xa40800c0, 8, /* IMR0 / IMCR0 */
- { 0, TMU1_TUNI2,TMU1_TUNI1,TMU1_TUNI0,0,SDHI1_SDHII2,SDHI1_SDHII1,SDHI1_SDHII0} },
+ { 0, TMU1_TUNI2, TMU1_TUNI1, TMU1_TUNI0,
+ 0, DISABLED, ENABLED, ENABLED } },
{ 0xa4080084, 0xa40800c4, 8, /* IMR1 / IMCR1 */
{ VIO_VOUI, VIO_VEU2HI,VIO_BEUI,VIO_CEUI,DMAC0A_DEI3,DMAC0A_DEI2,DMAC0A_DEI1,DMAC0A_DEI0 } },
{ 0xa4080088, 0xa40800c8, 8, /* IMR2 / IMCR2 */
@@ -763,7 +763,8 @@
{ I2C_DTEI, I2C_WAITI, I2C_TACKI, I2C_ALI,
FLCTL_FLTREQ1I, FLCTL_FLTREQ0I, FLCTL_FLTENDI, FLCTL_FLSTEI } },
{ 0xa40800a0, 0xa40800e0, 8, /* IMR8 / IMCR8 */
- { 0,SDHI0_SDHII2,SDHI0_SDHII1,SDHI0_SDHII0,0,0,SCIFA_SCIFA2,SIU_SIUI } },
+ { 0, DISABLED, ENABLED, ENABLED,
+ 0, 0, SCIFA_SCIFA2, SIU_SIUI } },
{ 0xa40800a4, 0xa40800e4, 8, /* IMR9 / IMCR9 */
{ 0, 0, 0, CMT_CMTI, 0, 0, USB_USI0,0 } },
{ 0xa40800a8, 0xa40800e8, 8, /* IMR10 / IMCR10 */
@@ -803,9 +804,13 @@
{ IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
};
-static DECLARE_INTC_DESC_ACK(intc_desc, "sh7723", vectors, groups,
- mask_registers, prio_registers, sense_registers,
- ack_registers);
+static struct intc_desc intc_desc __initdata = {
+ .name = "sh7723",
+ .force_enable = ENABLED,
+ .force_disable = DISABLED,
+ .hw = INTC_HW_DESC(vectors, groups, mask_registers,
+ prio_registers, sense_registers, ack_registers),
+};
void __init plat_irq_setup(void)
{
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c
index d32f96c..31e3451 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c
@@ -714,14 +714,17 @@
#define RAMCR_CACHE_L2FC 0x0002
#define RAMCR_CACHE_L2E 0x0001
#define L2_CACHE_ENABLE (RAMCR_CACHE_L2E|RAMCR_CACHE_L2FC)
-void __uses_jump_to_uncached l2_cache_init(void)
+
+void l2_cache_init(void)
{
/* Enable L2 cache */
- ctrl_outl(L2_CACHE_ENABLE, RAMCR);
+ __raw_writel(L2_CACHE_ENABLE, RAMCR);
}
enum {
UNUSED = 0,
+ ENABLED,
+ DISABLED,
/* interrupt sources */
IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
@@ -750,14 +753,12 @@
ETHI,
I2C1_ALI, I2C1_TACKI, I2C1_WAITI, I2C1_DTEI,
I2C0_ALI, I2C0_TACKI, I2C0_WAITI, I2C0_DTEI,
- SDHI0_SDHII0, SDHI0_SDHII1, SDHI0_SDHII2, SDHI0_SDHII3,
CMT,
TSIF,
FSI,
SCIFA5,
TMU0_TUNI0, TMU0_TUNI1, TMU0_TUNI2,
IRDA,
- SDHI1_SDHII0, SDHI1_SDHII1, SDHI1_SDHII2,
JPU,
_2DDMAC,
MMC_MMC2I, MMC_MMC3I,
@@ -839,10 +840,10 @@
INTC_VECT(I2C0_WAITI, 0xE40),
INTC_VECT(I2C0_DTEI, 0xE60),
- INTC_VECT(SDHI0_SDHII0, 0xE80),
- INTC_VECT(SDHI0_SDHII1, 0xEA0),
- INTC_VECT(SDHI0_SDHII2, 0xEC0),
- INTC_VECT(SDHI0_SDHII3, 0xEE0),
+ INTC_VECT(SDHI0, 0xE80),
+ INTC_VECT(SDHI0, 0xEA0),
+ INTC_VECT(SDHI0, 0xEC0),
+ INTC_VECT(SDHI0, 0xEE0),
INTC_VECT(CMT, 0xF00),
INTC_VECT(TSIF, 0xF20),
@@ -855,9 +856,9 @@
INTC_VECT(IRDA, 0x480),
- INTC_VECT(SDHI1_SDHII0, 0x4E0),
- INTC_VECT(SDHI1_SDHII1, 0x500),
- INTC_VECT(SDHI1_SDHII2, 0x520),
+ INTC_VECT(SDHI1, 0x4E0),
+ INTC_VECT(SDHI1, 0x500),
+ INTC_VECT(SDHI1, 0x520),
INTC_VECT(JPU, 0x560),
INTC_VECT(_2DDMAC, 0x4A0),
@@ -883,8 +884,6 @@
INTC_GROUP(DMAC0B, DMAC0B_DEI4, DMAC0B_DEI5, DMAC0B_DADERR),
INTC_GROUP(I2C0, I2C0_ALI, I2C0_TACKI, I2C0_WAITI, I2C0_DTEI),
INTC_GROUP(I2C1, I2C1_ALI, I2C1_TACKI, I2C1_WAITI, I2C1_DTEI),
- INTC_GROUP(SDHI0, SDHI0_SDHII0, SDHI0_SDHII1, SDHI0_SDHII2, SDHI0_SDHII3),
- INTC_GROUP(SDHI1, SDHI1_SDHII0, SDHI1_SDHII1, SDHI1_SDHII2),
INTC_GROUP(SPU, SPU_SPUI0, SPU_SPUI1),
INTC_GROUP(MMCIF, MMC_MMC2I, MMC_MMC3I),
};
@@ -892,7 +891,7 @@
static struct intc_mask_reg mask_registers[] __initdata = {
{ 0xa4080080, 0xa40800c0, 8, /* IMR0 / IMCR0 */
{ 0, TMU1_TUNI2, TMU1_TUNI1, TMU1_TUNI0,
- 0, SDHI1_SDHII2, SDHI1_SDHII1, SDHI1_SDHII0 } },
+ 0, DISABLED, ENABLED, ENABLED } },
{ 0xa4080084, 0xa40800c4, 8, /* IMR1 / IMCR1 */
{ VIO_VOU, VIO_VEU1, VIO_BEU0, VIO_CEU0,
DMAC0A_DEI3, DMAC0A_DEI2, DMAC0A_DEI1, DMAC0A_DEI0 } },
@@ -914,7 +913,7 @@
{ I2C0_DTEI, I2C0_WAITI, I2C0_TACKI, I2C0_ALI,
I2C1_DTEI, I2C1_WAITI, I2C1_TACKI, I2C1_ALI } },
{ 0xa40800a0, 0xa40800e0, 8, /* IMR8 / IMCR8 */
- { SDHI0_SDHII3, SDHI0_SDHII2, SDHI0_SDHII1, SDHI0_SDHII0,
+ { DISABLED, DISABLED, ENABLED, ENABLED,
0, 0, SCIFA5, FSI } },
{ 0xa40800a4, 0xa40800e4, 8, /* IMR9 / IMCR9 */
{ 0, 0, 0, CMT, 0, USB1, USB0, 0 } },
@@ -961,9 +960,13 @@
{ IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
};
-static DECLARE_INTC_DESC_ACK(intc_desc, "sh7724", vectors, groups,
- mask_registers, prio_registers, sense_registers,
- ack_registers);
+static struct intc_desc intc_desc __initdata = {
+ .name = "sh7724",
+ .force_enable = ENABLED,
+ .force_disable = DISABLED,
+ .hw = INTC_HW_DESC(vectors, groups, mask_registers,
+ prio_registers, sense_registers, ack_registers),
+};
void __init plat_irq_setup(void)
{
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7757.c b/arch/sh/kernel/cpu/sh4a/setup-sh7757.c
index 37e32ef..e75edf5 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7757.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7757.c
@@ -487,17 +487,17 @@
void __init plat_irq_setup(void)
{
/* disable IRQ3-0 + IRQ7-4 */
- ctrl_outl(0xff000000, INTC_INTMSK0);
+ __raw_writel(0xff000000, INTC_INTMSK0);
/* disable IRL3-0 + IRL7-4 */
- ctrl_outl(0xc0000000, INTC_INTMSK1);
- ctrl_outl(0xfffefffe, INTC_INTMSK2);
+ __raw_writel(0xc0000000, INTC_INTMSK1);
+ __raw_writel(0xfffefffe, INTC_INTMSK2);
/* select IRL mode for IRL3-0 + IRL7-4 */
- ctrl_outl(ctrl_inl(INTC_ICR0) & ~0x00c00000, INTC_ICR0);
+ __raw_writel(__raw_readl(INTC_ICR0) & ~0x00c00000, INTC_ICR0);
/* disable holding function, ie enable "SH-4 Mode" */
- ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00200000, INTC_ICR0);
+ __raw_writel(__raw_readl(INTC_ICR0) | 0x00200000, INTC_ICR0);
register_intc_controller(&intc_desc);
}
@@ -507,32 +507,32 @@
switch (mode) {
case IRQ_MODE_IRQ7654:
/* select IRQ mode for IRL7-4 */
- ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00400000, INTC_ICR0);
+ __raw_writel(__raw_readl(INTC_ICR0) | 0x00400000, INTC_ICR0);
register_intc_controller(&intc_desc_irq4567);
break;
case IRQ_MODE_IRQ3210:
/* select IRQ mode for IRL3-0 */
- ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00800000, INTC_ICR0);
+ __raw_writel(__raw_readl(INTC_ICR0) | 0x00800000, INTC_ICR0);
register_intc_controller(&intc_desc_irq0123);
break;
case IRQ_MODE_IRL7654:
/* enable IRL7-4 but don't provide any masking */
- ctrl_outl(0x40000000, INTC_INTMSKCLR1);
- ctrl_outl(0x0000fffe, INTC_INTMSKCLR2);
+ __raw_writel(0x40000000, INTC_INTMSKCLR1);
+ __raw_writel(0x0000fffe, INTC_INTMSKCLR2);
break;
case IRQ_MODE_IRL3210:
/* enable IRL0-3 but don't provide any masking */
- ctrl_outl(0x80000000, INTC_INTMSKCLR1);
- ctrl_outl(0xfffe0000, INTC_INTMSKCLR2);
+ __raw_writel(0x80000000, INTC_INTMSKCLR1);
+ __raw_writel(0xfffe0000, INTC_INTMSKCLR2);
break;
case IRQ_MODE_IRL7654_MASK:
/* enable IRL7-4 and mask using cpu intc controller */
- ctrl_outl(0x40000000, INTC_INTMSKCLR1);
+ __raw_writel(0x40000000, INTC_INTMSKCLR1);
register_intc_controller(&intc_desc_irl4567);
break;
case IRQ_MODE_IRL3210_MASK:
/* enable IRL0-3 and mask using cpu intc controller */
- ctrl_outl(0x80000000, INTC_INTMSKCLR1);
+ __raw_writel(0x80000000, INTC_INTMSKCLR1);
register_intc_controller(&intc_desc_irl0123);
break;
default:
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
index 6aba26f..7f6b0a5 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
@@ -538,11 +538,11 @@
void __init plat_irq_setup(void)
{
/* disable IRQ7-0 */
- ctrl_outl(0xff000000, INTC_INTMSK0);
+ __raw_writel(0xff000000, INTC_INTMSK0);
/* disable IRL3-0 + IRL7-4 */
- ctrl_outl(0xc0000000, INTC_INTMSK1);
- ctrl_outl(0xfffefffe, INTC_INTMSK2);
+ __raw_writel(0xc0000000, INTC_INTMSK1);
+ __raw_writel(0xfffefffe, INTC_INTMSK2);
register_intc_controller(&intc_desc);
}
@@ -552,27 +552,27 @@
switch (mode) {
case IRQ_MODE_IRQ:
/* select IRQ mode for IRL3-0 + IRL7-4 */
- ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00c00000, INTC_ICR0);
+ __raw_writel(__raw_readl(INTC_ICR0) | 0x00c00000, INTC_ICR0);
register_intc_controller(&intc_irq_desc);
break;
case IRQ_MODE_IRL7654:
/* enable IRL7-4 but don't provide any masking */
- ctrl_outl(0x40000000, INTC_INTMSKCLR1);
- ctrl_outl(0x0000fffe, INTC_INTMSKCLR2);
+ __raw_writel(0x40000000, INTC_INTMSKCLR1);
+ __raw_writel(0x0000fffe, INTC_INTMSKCLR2);
break;
case IRQ_MODE_IRL3210:
/* enable IRL0-3 but don't provide any masking */
- ctrl_outl(0x80000000, INTC_INTMSKCLR1);
- ctrl_outl(0xfffe0000, INTC_INTMSKCLR2);
+ __raw_writel(0x80000000, INTC_INTMSKCLR1);
+ __raw_writel(0xfffe0000, INTC_INTMSKCLR2);
break;
case IRQ_MODE_IRL7654_MASK:
/* enable IRL7-4 and mask using cpu intc controller */
- ctrl_outl(0x40000000, INTC_INTMSKCLR1);
+ __raw_writel(0x40000000, INTC_INTMSKCLR1);
register_intc_controller(&intc_irl7654_desc);
break;
case IRQ_MODE_IRL3210_MASK:
/* enable IRL0-3 and mask using cpu intc controller */
- ctrl_outl(0x80000000, INTC_INTMSKCLR1);
+ __raw_writel(0x80000000, INTC_INTMSKCLR1);
register_intc_controller(&intc_irl3210_desc);
break;
default:
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7770.c b/arch/sh/kernel/cpu/sh4a/setup-sh7770.c
index c1643bc..86d681e 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7770.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7770.c
@@ -694,17 +694,17 @@
void __init plat_irq_setup(void)
{
/* disable IRQ7-0 */
- ctrl_outl(0xff000000, INTC_INTMSK0);
+ __raw_writel(0xff000000, INTC_INTMSK0);
/* disable IRL3-0 + IRL7-4 */
- ctrl_outl(0xc0000000, INTC_INTMSK1);
- ctrl_outl(0xfffefffe, INTC_INTMSK2);
+ __raw_writel(0xc0000000, INTC_INTMSK1);
+ __raw_writel(0xfffefffe, INTC_INTMSK2);
/* select IRL mode for IRL3-0 + IRL7-4 */
- ctrl_outl(ctrl_inl(INTC_ICR0) & ~0x00c00000, INTC_ICR0);
+ __raw_writel(__raw_readl(INTC_ICR0) & ~0x00c00000, INTC_ICR0);
/* disable holding function, ie enable "SH-4 Mode" */
- ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00200000, INTC_ICR0);
+ __raw_writel(__raw_readl(INTC_ICR0) | 0x00200000, INTC_ICR0);
register_intc_controller(&intc_desc);
}
@@ -714,27 +714,27 @@
switch (mode) {
case IRQ_MODE_IRQ:
/* select IRQ mode for IRL3-0 + IRL7-4 */
- ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00c00000, INTC_ICR0);
+ __raw_writel(__raw_readl(INTC_ICR0) | 0x00c00000, INTC_ICR0);
register_intc_controller(&intc_irq_desc);
break;
case IRQ_MODE_IRL7654:
/* enable IRL7-4 but don't provide any masking */
- ctrl_outl(0x40000000, INTC_INTMSKCLR1);
- ctrl_outl(0x0000fffe, INTC_INTMSKCLR2);
+ __raw_writel(0x40000000, INTC_INTMSKCLR1);
+ __raw_writel(0x0000fffe, INTC_INTMSKCLR2);
break;
case IRQ_MODE_IRL3210:
/* enable IRL0-3 but don't provide any masking */
- ctrl_outl(0x80000000, INTC_INTMSKCLR1);
- ctrl_outl(0xfffe0000, INTC_INTMSKCLR2);
+ __raw_writel(0x80000000, INTC_INTMSKCLR1);
+ __raw_writel(0xfffe0000, INTC_INTMSKCLR2);
break;
case IRQ_MODE_IRL7654_MASK:
/* enable IRL7-4 and mask using cpu intc controller */
- ctrl_outl(0x40000000, INTC_INTMSKCLR1);
+ __raw_writel(0x40000000, INTC_INTMSKCLR1);
register_intc_controller(&intc_irl7654_desc);
break;
case IRQ_MODE_IRL3210_MASK:
/* enable IRL0-3 and mask using cpu intc controller */
- ctrl_outl(0x80000000, INTC_INTMSKCLR1);
+ __raw_writel(0x80000000, INTC_INTMSKCLR1);
register_intc_controller(&intc_irl3210_desc);
break;
default:
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
index c310558..f8f2161 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
@@ -461,17 +461,17 @@
void __init plat_irq_setup(void)
{
/* disable IRQ7-0 */
- ctrl_outl(0xff000000, INTC_INTMSK0);
+ __raw_writel(0xff000000, INTC_INTMSK0);
/* disable IRL3-0 + IRL7-4 */
- ctrl_outl(0xc0000000, INTC_INTMSK1);
- ctrl_outl(0xfffefffe, INTC_INTMSK2);
+ __raw_writel(0xc0000000, INTC_INTMSK1);
+ __raw_writel(0xfffefffe, INTC_INTMSK2);
/* select IRL mode for IRL3-0 + IRL7-4 */
- ctrl_outl(ctrl_inl(INTC_ICR0) & ~0x00c00000, INTC_ICR0);
+ __raw_writel(__raw_readl(INTC_ICR0) & ~0x00c00000, INTC_ICR0);
/* disable holding function, ie enable "SH-4 Mode" */
- ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00200000, INTC_ICR0);
+ __raw_writel(__raw_readl(INTC_ICR0) | 0x00200000, INTC_ICR0);
register_intc_controller(&intc_desc);
}
@@ -481,27 +481,27 @@
switch (mode) {
case IRQ_MODE_IRQ:
/* select IRQ mode for IRL3-0 + IRL7-4 */
- ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00c00000, INTC_ICR0);
+ __raw_writel(__raw_readl(INTC_ICR0) | 0x00c00000, INTC_ICR0);
register_intc_controller(&intc_irq_desc);
break;
case IRQ_MODE_IRL7654:
/* enable IRL7-4 but don't provide any masking */
- ctrl_outl(0x40000000, INTC_INTMSKCLR1);
- ctrl_outl(0x0000fffe, INTC_INTMSKCLR2);
+ __raw_writel(0x40000000, INTC_INTMSKCLR1);
+ __raw_writel(0x0000fffe, INTC_INTMSKCLR2);
break;
case IRQ_MODE_IRL3210:
/* enable IRL0-3 but don't provide any masking */
- ctrl_outl(0x80000000, INTC_INTMSKCLR1);
- ctrl_outl(0xfffe0000, INTC_INTMSKCLR2);
+ __raw_writel(0x80000000, INTC_INTMSKCLR1);
+ __raw_writel(0xfffe0000, INTC_INTMSKCLR2);
break;
case IRQ_MODE_IRL7654_MASK:
/* enable IRL7-4 and mask using cpu intc controller */
- ctrl_outl(0x40000000, INTC_INTMSKCLR1);
+ __raw_writel(0x40000000, INTC_INTMSKCLR1);
register_intc_controller(&intc_irl7654_desc);
break;
case IRQ_MODE_IRL3210_MASK:
/* enable IRL0-3 and mask using cpu intc controller */
- ctrl_outl(0x80000000, INTC_INTMSKCLR1);
+ __raw_writel(0x80000000, INTC_INTMSKCLR1);
register_intc_controller(&intc_irl3210_desc);
break;
default:
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c
index f685b9b..23448d8 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c
@@ -541,17 +541,17 @@
void __init plat_irq_setup(void)
{
/* disable IRQ3-0 + IRQ7-4 */
- ctrl_outl(0xff000000, INTC_INTMSK0);
+ __raw_writel(0xff000000, INTC_INTMSK0);
/* disable IRL3-0 + IRL7-4 */
- ctrl_outl(0xc0000000, INTC_INTMSK1);
- ctrl_outl(0xfffefffe, INTC_INTMSK2);
+ __raw_writel(0xc0000000, INTC_INTMSK1);
+ __raw_writel(0xfffefffe, INTC_INTMSK2);
/* select IRL mode for IRL3-0 + IRL7-4 */
- ctrl_outl(ctrl_inl(INTC_ICR0) & ~0x00c00000, INTC_ICR0);
+ __raw_writel(__raw_readl(INTC_ICR0) & ~0x00c00000, INTC_ICR0);
/* disable holding function, ie enable "SH-4 Mode" */
- ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00200000, INTC_ICR0);
+ __raw_writel(__raw_readl(INTC_ICR0) | 0x00200000, INTC_ICR0);
register_intc_controller(&intc_desc);
}
@@ -561,32 +561,32 @@
switch (mode) {
case IRQ_MODE_IRQ7654:
/* select IRQ mode for IRL7-4 */
- ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00400000, INTC_ICR0);
+ __raw_writel(__raw_readl(INTC_ICR0) | 0x00400000, INTC_ICR0);
register_intc_controller(&intc_desc_irq4567);
break;
case IRQ_MODE_IRQ3210:
/* select IRQ mode for IRL3-0 */
- ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00800000, INTC_ICR0);
+ __raw_writel(__raw_readl(INTC_ICR0) | 0x00800000, INTC_ICR0);
register_intc_controller(&intc_desc_irq0123);
break;
case IRQ_MODE_IRL7654:
/* enable IRL7-4 but don't provide any masking */
- ctrl_outl(0x40000000, INTC_INTMSKCLR1);
- ctrl_outl(0x0000fffe, INTC_INTMSKCLR2);
+ __raw_writel(0x40000000, INTC_INTMSKCLR1);
+ __raw_writel(0x0000fffe, INTC_INTMSKCLR2);
break;
case IRQ_MODE_IRL3210:
/* enable IRL0-3 but don't provide any masking */
- ctrl_outl(0x80000000, INTC_INTMSKCLR1);
- ctrl_outl(0xfffe0000, INTC_INTMSKCLR2);
+ __raw_writel(0x80000000, INTC_INTMSKCLR1);
+ __raw_writel(0xfffe0000, INTC_INTMSKCLR2);
break;
case IRQ_MODE_IRL7654_MASK:
/* enable IRL7-4 and mask using cpu intc controller */
- ctrl_outl(0x40000000, INTC_INTMSKCLR1);
+ __raw_writel(0x40000000, INTC_INTMSKCLR1);
register_intc_controller(&intc_desc_irl4567);
break;
case IRQ_MODE_IRL3210_MASK:
/* enable IRL0-3 and mask using cpu intc controller */
- ctrl_outl(0x80000000, INTC_INTMSKCLR1);
+ __raw_writel(0x80000000, INTC_INTMSKCLR1);
register_intc_controller(&intc_desc_irl0123);
break;
default:
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c
index 7167348..7e58532 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c
@@ -867,14 +867,14 @@
void __init plat_irq_setup(void)
{
/* disable IRQ3-0 + IRQ7-4 */
- ctrl_outl(0xff000000, INTC_INTMSK0);
+ __raw_writel(0xff000000, INTC_INTMSK0);
/* disable IRL3-0 + IRL7-4 */
- ctrl_outl(0xc0000000, INTC_INTMSK1);
- ctrl_outl(0xfffefffe, INTC_INTMSK2);
+ __raw_writel(0xc0000000, INTC_INTMSK1);
+ __raw_writel(0xfffefffe, INTC_INTMSK2);
/* select IRL mode for IRL3-0 + IRL7-4 */
- ctrl_outl(ctrl_inl(INTC_ICR0) & ~0x00c00000, INTC_ICR0);
+ __raw_writel(__raw_readl(INTC_ICR0) & ~0x00c00000, INTC_ICR0);
register_intc_controller(&intc_desc);
}
@@ -884,32 +884,32 @@
switch (mode) {
case IRQ_MODE_IRQ7654:
/* select IRQ mode for IRL7-4 */
- ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00400000, INTC_ICR0);
+ __raw_writel(__raw_readl(INTC_ICR0) | 0x00400000, INTC_ICR0);
register_intc_controller(&intc_desc_irq4567);
break;
case IRQ_MODE_IRQ3210:
/* select IRQ mode for IRL3-0 */
- ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00800000, INTC_ICR0);
+ __raw_writel(__raw_readl(INTC_ICR0) | 0x00800000, INTC_ICR0);
register_intc_controller(&intc_desc_irq0123);
break;
case IRQ_MODE_IRL7654:
/* enable IRL7-4 but don't provide any masking */
- ctrl_outl(0x40000000, INTC_INTMSKCLR1);
- ctrl_outl(0x0000fffe, INTC_INTMSKCLR2);
+ __raw_writel(0x40000000, INTC_INTMSKCLR1);
+ __raw_writel(0x0000fffe, INTC_INTMSKCLR2);
break;
case IRQ_MODE_IRL3210:
/* enable IRL0-3 but don't provide any masking */
- ctrl_outl(0x80000000, INTC_INTMSKCLR1);
- ctrl_outl(0xfffe0000, INTC_INTMSKCLR2);
+ __raw_writel(0x80000000, INTC_INTMSKCLR1);
+ __raw_writel(0xfffe0000, INTC_INTMSKCLR2);
break;
case IRQ_MODE_IRL7654_MASK:
/* enable IRL7-4 and mask using cpu intc controller */
- ctrl_outl(0x40000000, INTC_INTMSKCLR1);
+ __raw_writel(0x40000000, INTC_INTMSKCLR1);
register_intc_controller(&intc_desc_irl4567);
break;
case IRQ_MODE_IRL3210_MASK:
/* enable IRL0-3 and mask using cpu intc controller */
- ctrl_outl(0x80000000, INTC_INTMSKCLR1);
+ __raw_writel(0x80000000, INTC_INTMSKCLR1);
register_intc_controller(&intc_desc_irl0123);
break;
default:
diff --git a/arch/sh/kernel/cpu/sh4a/smp-shx3.c b/arch/sh/kernel/cpu/sh4a/smp-shx3.c
index 5863e0c..11bf4c1 100644
--- a/arch/sh/kernel/cpu/sh4a/smp-shx3.c
+++ b/arch/sh/kernel/cpu/sh4a/smp-shx3.c
@@ -78,7 +78,10 @@
void plat_start_cpu(unsigned int cpu, unsigned long entry_point)
{
- __raw_writel(entry_point, RESET_REG(cpu));
+ if (__in_29bit_mode())
+ __raw_writel(entry_point, RESET_REG(cpu));
+ else
+ __raw_writel(virt_to_phys(entry_point), RESET_REG(cpu));
if (!(__raw_readl(STBCR_REG(cpu)) & STBCR_MSTP))
__raw_writel(STBCR_MSTP, STBCR_REG(cpu));
diff --git a/arch/sh/kernel/cpu/sh4a/ubc.c b/arch/sh/kernel/cpu/sh4a/ubc.c
new file mode 100644
index 0000000..efb2745
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh4a/ubc.c
@@ -0,0 +1,133 @@
+/*
+ * arch/sh/kernel/cpu/sh4a/ubc.c
+ *
+ * On-chip UBC support for SH-4A CPUs.
+ *
+ * Copyright (C) 2009 - 2010 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <asm/hw_breakpoint.h>
+
+#define UBC_CBR(idx) (0xff200000 + (0x20 * idx))
+#define UBC_CRR(idx) (0xff200004 + (0x20 * idx))
+#define UBC_CAR(idx) (0xff200008 + (0x20 * idx))
+#define UBC_CAMR(idx) (0xff20000c + (0x20 * idx))
+
+#define UBC_CCMFR 0xff200600
+#define UBC_CBCR 0xff200620
+
+/* CRR */
+#define UBC_CRR_PCB (1 << 1)
+#define UBC_CRR_BIE (1 << 0)
+
+/* CBR */
+#define UBC_CBR_CE (1 << 0)
+
+static struct sh_ubc sh4a_ubc;
+
+static void sh4a_ubc_enable(struct arch_hw_breakpoint *info, int idx)
+{
+ __raw_writel(UBC_CBR_CE | info->len | info->type, UBC_CBR(idx));
+ __raw_writel(info->address, UBC_CAR(idx));
+}
+
+static void sh4a_ubc_disable(struct arch_hw_breakpoint *info, int idx)
+{
+ __raw_writel(0, UBC_CBR(idx));
+ __raw_writel(0, UBC_CAR(idx));
+}
+
+static void sh4a_ubc_enable_all(unsigned long mask)
+{
+ int i;
+
+ for (i = 0; i < sh4a_ubc.num_events; i++)
+ if (mask & (1 << i))
+ __raw_writel(__raw_readl(UBC_CBR(i)) | UBC_CBR_CE,
+ UBC_CBR(i));
+}
+
+static void sh4a_ubc_disable_all(void)
+{
+ int i;
+
+ for (i = 0; i < sh4a_ubc.num_events; i++)
+ __raw_writel(__raw_readl(UBC_CBR(i)) & ~UBC_CBR_CE,
+ UBC_CBR(i));
+}
+
+static unsigned long sh4a_ubc_active_mask(void)
+{
+ unsigned long active = 0;
+ int i;
+
+ for (i = 0; i < sh4a_ubc.num_events; i++)
+ if (__raw_readl(UBC_CBR(i)) & UBC_CBR_CE)
+ active |= (1 << i);
+
+ return active;
+}
+
+static unsigned long sh4a_ubc_triggered_mask(void)
+{
+ return __raw_readl(UBC_CCMFR);
+}
+
+static void sh4a_ubc_clear_triggered_mask(unsigned long mask)
+{
+ __raw_writel(__raw_readl(UBC_CCMFR) & ~mask, UBC_CCMFR);
+}
+
+static struct sh_ubc sh4a_ubc = {
+ .name = "SH-4A",
+ .num_events = 2,
+ .trap_nr = 0x1e0,
+ .enable = sh4a_ubc_enable,
+ .disable = sh4a_ubc_disable,
+ .enable_all = sh4a_ubc_enable_all,
+ .disable_all = sh4a_ubc_disable_all,
+ .active_mask = sh4a_ubc_active_mask,
+ .triggered_mask = sh4a_ubc_triggered_mask,
+ .clear_triggered_mask = sh4a_ubc_clear_triggered_mask,
+};
+
+static int __init sh4a_ubc_init(void)
+{
+ struct clk *ubc_iclk = clk_get(NULL, "ubc0");
+ int i;
+
+ /*
+ * The UBC MSTP bit is optional, as not all platforms will have
+ * it. Just ignore it if we can't find it.
+ */
+ if (IS_ERR(ubc_iclk))
+ ubc_iclk = NULL;
+
+ clk_enable(ubc_iclk);
+
+ __raw_writel(0, UBC_CBCR);
+
+ for (i = 0; i < sh4a_ubc.num_events; i++) {
+ __raw_writel(0, UBC_CAMR(i));
+ __raw_writel(0, UBC_CBR(i));
+
+ __raw_writel(UBC_CRR_BIE | UBC_CRR_PCB, UBC_CRR(i));
+
+ /* dummy read for write posting */
+ (void)__raw_readl(UBC_CRR(i));
+ }
+
+ clk_disable(ubc_iclk);
+
+ sh4a_ubc.clk = ubc_iclk;
+
+ return register_sh_ubc(&sh4a_ubc);
+}
+arch_initcall(sh4a_ubc_init);
diff --git a/arch/sh/kernel/cpu/sh5/clock-sh5.c b/arch/sh/kernel/cpu/sh5/clock-sh5.c
index 7f864eb..9cfc19b 100644
--- a/arch/sh/kernel/cpu/sh5/clock-sh5.c
+++ b/arch/sh/kernel/cpu/sh5/clock-sh5.c
@@ -24,7 +24,7 @@
static void master_clk_init(struct clk *clk)
{
- int idx = (ctrl_inl(cprc_base + 0x00) >> 6) & 0x0007;
+ int idx = (__raw_readl(cprc_base + 0x00) >> 6) & 0x0007;
clk->rate *= ifc_table[idx];
}
@@ -34,7 +34,7 @@
static unsigned long module_clk_recalc(struct clk *clk)
{
- int idx = (ctrl_inw(cprc_base) >> 12) & 0x0007;
+ int idx = (__raw_readw(cprc_base) >> 12) & 0x0007;
return clk->parent->rate / ifc_table[idx];
}
@@ -44,7 +44,7 @@
static unsigned long bus_clk_recalc(struct clk *clk)
{
- int idx = (ctrl_inw(cprc_base) >> 3) & 0x0007;
+ int idx = (__raw_readw(cprc_base) >> 3) & 0x0007;
return clk->parent->rate / ifc_table[idx];
}
@@ -54,7 +54,7 @@
static unsigned long cpu_clk_recalc(struct clk *clk)
{
- int idx = (ctrl_inw(cprc_base) & 0x0007);
+ int idx = (__raw_readw(cprc_base) & 0x0007);
return clk->parent->rate / ifc_table[idx];
}
diff --git a/arch/sh/kernel/cpu/sh5/entry.S b/arch/sh/kernel/cpu/sh5/entry.S
index 8f13f73..6b80295 100644
--- a/arch/sh/kernel/cpu/sh5/entry.S
+++ b/arch/sh/kernel/cpu/sh5/entry.S
@@ -187,7 +187,7 @@
.rept 6
.long do_exception_error /* 0x880 - 0x920 */
.endr
- .long do_software_break_point /* 0x940 */
+ .long breakpoint_trap_handler /* 0x940 */
.long do_exception_error /* 0x960 */
.long do_single_step /* 0x980 */
@@ -1124,7 +1124,7 @@
pta its_IRQ, tr0
beqi/l r4, EVENT_INTERRUPT, tr0
#ifdef CONFIG_SH_FPU
- movi do_fpu_state_restore, r6
+ movi fpu_state_restore_trap_handler, r6
#else
movi do_exception_error, r6
#endif
@@ -1135,7 +1135,7 @@
pta its_IRQ, tr0
beqi/l r4, EVENT_INTERRUPT, tr0
#ifdef CONFIG_SH_FPU
- movi do_fpu_state_restore, r6
+ movi fpu_state_restore_trap_handler, r6
#else
movi do_exception_error, r6
#endif
diff --git a/arch/sh/kernel/cpu/sh5/fpu.c b/arch/sh/kernel/cpu/sh5/fpu.c
index 4648cce..4b3bb35 100644
--- a/arch/sh/kernel/cpu/sh5/fpu.c
+++ b/arch/sh/kernel/cpu/sh5/fpu.c
@@ -15,24 +15,6 @@
#include <linux/sched.h>
#include <linux/signal.h>
#include <asm/processor.h>
-#include <asm/user.h>
-#include <asm/io.h>
-#include <asm/fpu.h>
-
-/*
- * Initially load the FPU with signalling NANS. This bit pattern
- * has the property that no matter whether considered as single or as
- * double precision, it still represents a signalling NAN.
- */
-#define sNAN64 0xFFFFFFFFFFFFFFFFULL
-#define sNAN32 0xFFFFFFFFUL
-
-static union sh_fpu_union init_fpuregs = {
- .hard = {
- .fp_regs = { [0 ... 63] = sNAN32 },
- .fpscr = FPSCR_INIT
- }
-};
void save_fpu(struct task_struct *tsk)
{
@@ -72,12 +54,11 @@
"fgetscr fr63\n\t"
"fst.s %0, (32*8), fr63\n\t"
: /* no output */
- : "r" (&tsk->thread.fpu.hard)
+ : "r" (&tsk->thread.xstate->hardfpu)
: "memory");
}
-static inline void
-fpload(struct sh_fpu_hard_struct *fpregs)
+void restore_fpu(struct task_struct *tsk)
{
asm volatile("fld.p %0, (0*8), fp0\n\t"
"fld.p %0, (1*8), fp2\n\t"
@@ -116,16 +97,11 @@
"fld.p %0, (31*8), fp62\n\t"
: /* no output */
- : "r" (fpregs) );
+ : "r" (&tsk->thread.xstate->hardfpu)
+ : "memory");
}
-void fpinit(struct sh_fpu_hard_struct *fpregs)
-{
- *fpregs = init_fpuregs.hard;
-}
-
-asmlinkage void
-do_fpu_error(unsigned long ex, struct pt_regs *regs)
+asmlinkage void do_fpu_error(unsigned long ex, struct pt_regs *regs)
{
struct task_struct *tsk = current;
@@ -133,35 +109,6 @@
tsk->thread.trap_no = 11;
tsk->thread.error_code = 0;
+
force_sig(SIGFPE, tsk);
}
-
-
-asmlinkage void
-do_fpu_state_restore(unsigned long ex, struct pt_regs *regs)
-{
- void die(const char *str, struct pt_regs *regs, long err);
-
- if (! user_mode(regs))
- die("FPU used in kernel", regs, ex);
-
- regs->sr &= ~SR_FD;
-
- if (last_task_used_math == current)
- return;
-
- enable_fpu();
- if (last_task_used_math != NULL)
- /* Other processes fpu state, save away */
- save_fpu(last_task_used_math);
-
- last_task_used_math = current;
- if (used_math()) {
- fpload(¤t->thread.fpu.hard);
- } else {
- /* First time FPU user. */
- fpload(&init_fpuregs.hard);
- set_used_math();
- }
- disable_fpu();
-}
diff --git a/arch/sh/kernel/cpu/shmobile/pm.c b/arch/sh/kernel/cpu/shmobile/pm.c
index ca029a4..e559687 100644
--- a/arch/sh/kernel/cpu/shmobile/pm.c
+++ b/arch/sh/kernel/cpu/shmobile/pm.c
@@ -33,7 +33,8 @@
#define SUSP_MODE_SLEEP (SUSP_SH_SLEEP)
#define SUSP_MODE_SLEEP_SF (SUSP_SH_SLEEP | SUSP_SH_SF)
#define SUSP_MODE_STANDBY_SF (SUSP_SH_STANDBY | SUSP_SH_SF)
-#define SUSP_MODE_RSTANDBY (SUSP_SH_RSTANDBY | SUSP_SH_MMU | SUSP_SH_SF)
+#define SUSP_MODE_RSTANDBY_SF \
+ (SUSP_SH_RSTANDBY | SUSP_SH_MMU | SUSP_SH_REGS | SUSP_SH_SF)
/*
* U-standby mode is unsupported since it needs bootloader hacks
*/
diff --git a/arch/sh/kernel/cpu/shmobile/sleep.S b/arch/sh/kernel/cpu/shmobile/sleep.S
index e9dd7fa..e6aac65 100644
--- a/arch/sh/kernel/cpu/shmobile/sleep.S
+++ b/arch/sh/kernel/cpu/shmobile/sleep.S
@@ -48,8 +48,48 @@
stc sr, r0
mov.l r0, @(SH_SLEEP_SR, r5)
- /* save sp */
+ /* save general purpose registers to stack if needed */
+ mov.l @(SH_SLEEP_MODE, r5), r0
+ tst #SUSP_SH_REGS, r0
+ bt skip_regs_save
+
+ sts.l pr, @-r15
+ mov.l r14, @-r15
+ mov.l r13, @-r15
+ mov.l r12, @-r15
+ mov.l r11, @-r15
+ mov.l r10, @-r15
+ mov.l r9, @-r15
+ mov.l r8, @-r15
+
+ /* make sure bank0 is selected, save low registers */
+ mov.l rb_bit, r9
+ not r9, r9
+ bsr set_sr
+ mov #0, r10
+
+ bsr save_low_regs
+ nop
+
+ /* switch to bank 1, save low registers */
+ mov.l rb_bit, r10
+ bsr set_sr
+ mov #-1, r9
+
+ bsr save_low_regs
+ nop
+
+ /* switch back to bank 0 */
+ mov.l rb_bit, r9
+ not r9, r9
+ bsr set_sr
+ mov #0, r10
+
+skip_regs_save:
+
+ /* save sp, also set to internal ram */
mov.l r15, @(SH_SLEEP_SP, r5)
+ mov r5, r15
/* save stbcr */
bsr save_register
@@ -60,7 +100,7 @@
tst #SUSP_SH_MMU, r0
bt skip_mmu_save_disable
- /* save mmu state */
+ /* save mmu state */
bsr save_register
mov #SH_SLEEP_REG_PTEH, r0
@@ -177,6 +217,29 @@
mov.l @(r0, r5), r0
rts
nop
+
+set_sr:
+ stc sr, r8
+ and r9, r8
+ or r10, r8
+ ldc r8, sr
+ rts
+ nop
+
+save_low_regs:
+ mov.l r7, @-r15
+ mov.l r6, @-r15
+ mov.l r5, @-r15
+ mov.l r4, @-r15
+ mov.l r3, @-r15
+ mov.l r2, @-r15
+ mov.l r1, @-r15
+ rts
+ mov.l r0, @-r15
+
+ .balign 4
+rb_bit: .long 0x20000000 ! RB=1
+
ENTRY(sh_mobile_sleep_enter_end)
.balign 4
@@ -270,6 +333,40 @@
icbi @r0
skip_restore_mmu:
+
+ /* restore general purpose registers if needed */
+ mov.l @(SH_SLEEP_MODE, r5), r0
+ tst #SUSP_SH_REGS, r0
+ bt skip_restore_regs
+
+ /* switch to bank 1, restore low registers */
+ mov.l _rb_bit, r10
+ bsr _set_sr
+ mov #-1, r9
+
+ bsr restore_low_regs
+ nop
+
+ /* switch to bank0, restore low registers */
+ mov.l _rb_bit, r9
+ not r9, r9
+ bsr _set_sr
+ mov #0, r10
+
+ bsr restore_low_regs
+ nop
+
+ /* restore the rest of the registers */
+ mov.l @r15+, r8
+ mov.l @r15+, r9
+ mov.l @r15+, r10
+ mov.l @r15+, r11
+ mov.l @r15+, r12
+ mov.l @r15+, r13
+ mov.l @r15+, r14
+ lds.l @r15+, pr
+
+skip_restore_regs:
rte
nop
@@ -283,6 +380,26 @@
rts
nop
+_set_sr:
+ stc sr, r8
+ and r9, r8
+ or r10, r8
+ ldc r8, sr
+ rts
+ nop
+
+restore_low_regs:
+ mov.l @r15+, r0
+ mov.l @r15+, r1
+ mov.l @r15+, r2
+ mov.l @r15+, r3
+ mov.l @r15+, r4
+ mov.l @r15+, r5
+ mov.l @r15+, r6
+ rts
+ mov.l @r15+, r7
+
.balign 4
+_rb_bit: .long 0x20000000 ! RB=1
1: .long ~0x7ff
ENTRY(sh_mobile_sleep_resume_end)
diff --git a/arch/sh/kernel/debugtraps.S b/arch/sh/kernel/debugtraps.S
index 5917413..7a1b46f 100644
--- a/arch/sh/kernel/debugtraps.S
+++ b/arch/sh/kernel/debugtraps.S
@@ -13,7 +13,6 @@
#include <linux/linkage.h>
#if !defined(CONFIG_KGDB)
-#define breakpoint_trap_handler debug_trap_handler
#define singlestep_trap_handler debug_trap_handler
#endif
diff --git a/arch/sh/kernel/dwarf.c b/arch/sh/kernel/dwarf.c
index e511680..bd1c497 100644
--- a/arch/sh/kernel/dwarf.c
+++ b/arch/sh/kernel/dwarf.c
@@ -39,10 +39,10 @@
static struct kmem_cache *dwarf_reg_cachep;
static mempool_t *dwarf_reg_pool;
-static LIST_HEAD(dwarf_cie_list);
+static struct rb_root cie_root;
static DEFINE_SPINLOCK(dwarf_cie_lock);
-static LIST_HEAD(dwarf_fde_list);
+static struct rb_root fde_root;
static DEFINE_SPINLOCK(dwarf_fde_lock);
static struct dwarf_cie *cached_cie;
@@ -301,7 +301,8 @@
*/
static struct dwarf_cie *dwarf_lookup_cie(unsigned long cie_ptr)
{
- struct dwarf_cie *cie;
+ struct rb_node **rb_node = &cie_root.rb_node;
+ struct dwarf_cie *cie = NULL;
unsigned long flags;
spin_lock_irqsave(&dwarf_cie_lock, flags);
@@ -315,16 +316,24 @@
goto out;
}
- list_for_each_entry(cie, &dwarf_cie_list, link) {
- if (cie->cie_pointer == cie_ptr) {
- cached_cie = cie;
- break;
+ while (*rb_node) {
+ struct dwarf_cie *cie_tmp;
+
+ cie_tmp = rb_entry(*rb_node, struct dwarf_cie, node);
+ BUG_ON(!cie_tmp);
+
+ if (cie_ptr == cie_tmp->cie_pointer) {
+ cie = cie_tmp;
+ cached_cie = cie_tmp;
+ goto out;
+ } else {
+ if (cie_ptr < cie_tmp->cie_pointer)
+ rb_node = &(*rb_node)->rb_left;
+ else
+ rb_node = &(*rb_node)->rb_right;
}
}
- /* Couldn't find the entry in the list. */
- if (&cie->link == &dwarf_cie_list)
- cie = NULL;
out:
spin_unlock_irqrestore(&dwarf_cie_lock, flags);
return cie;
@@ -336,25 +345,34 @@
*/
struct dwarf_fde *dwarf_lookup_fde(unsigned long pc)
{
- struct dwarf_fde *fde;
+ struct rb_node **rb_node = &fde_root.rb_node;
+ struct dwarf_fde *fde = NULL;
unsigned long flags;
spin_lock_irqsave(&dwarf_fde_lock, flags);
- list_for_each_entry(fde, &dwarf_fde_list, link) {
- unsigned long start, end;
+ while (*rb_node) {
+ struct dwarf_fde *fde_tmp;
+ unsigned long tmp_start, tmp_end;
- start = fde->initial_location;
- end = fde->initial_location + fde->address_range;
+ fde_tmp = rb_entry(*rb_node, struct dwarf_fde, node);
+ BUG_ON(!fde_tmp);
- if (pc >= start && pc < end)
- break;
+ tmp_start = fde_tmp->initial_location;
+ tmp_end = fde_tmp->initial_location + fde_tmp->address_range;
+
+ if (pc < tmp_start) {
+ rb_node = &(*rb_node)->rb_left;
+ } else {
+ if (pc < tmp_end) {
+ fde = fde_tmp;
+ goto out;
+ } else
+ rb_node = &(*rb_node)->rb_right;
+ }
}
- /* Couldn't find the entry in the list. */
- if (&fde->link == &dwarf_fde_list)
- fde = NULL;
-
+out:
spin_unlock_irqrestore(&dwarf_fde_lock, flags);
return fde;
@@ -552,8 +570,8 @@
* on the callstack. Each of the lower (older) stack frames are
* linked via the "prev" member.
*/
-struct dwarf_frame * dwarf_unwind_stack(unsigned long pc,
- struct dwarf_frame *prev)
+struct dwarf_frame *dwarf_unwind_stack(unsigned long pc,
+ struct dwarf_frame *prev)
{
struct dwarf_frame *frame;
struct dwarf_cie *cie;
@@ -708,6 +726,8 @@
static int dwarf_parse_cie(void *entry, void *p, unsigned long len,
unsigned char *end, struct module *mod)
{
+ struct rb_node **rb_node = &cie_root.rb_node;
+ struct rb_node *parent;
struct dwarf_cie *cie;
unsigned long flags;
int count;
@@ -802,11 +822,30 @@
cie->initial_instructions = p;
cie->instructions_end = end;
- cie->mod = mod;
-
/* Add to list */
spin_lock_irqsave(&dwarf_cie_lock, flags);
- list_add_tail(&cie->link, &dwarf_cie_list);
+
+ while (*rb_node) {
+ struct dwarf_cie *cie_tmp;
+
+ cie_tmp = rb_entry(*rb_node, struct dwarf_cie, node);
+
+ parent = *rb_node;
+
+ if (cie->cie_pointer < cie_tmp->cie_pointer)
+ rb_node = &parent->rb_left;
+ else if (cie->cie_pointer >= cie_tmp->cie_pointer)
+ rb_node = &parent->rb_right;
+ else
+ WARN_ON(1);
+ }
+
+ rb_link_node(&cie->node, parent, rb_node);
+ rb_insert_color(&cie->node, &cie_root);
+
+ if (mod != NULL)
+ list_add_tail(&cie->link, &mod->arch.cie_list);
+
spin_unlock_irqrestore(&dwarf_cie_lock, flags);
return 0;
@@ -816,6 +855,8 @@
void *start, unsigned long len,
unsigned char *end, struct module *mod)
{
+ struct rb_node **rb_node = &fde_root.rb_node;
+ struct rb_node *parent;
struct dwarf_fde *fde;
struct dwarf_cie *cie;
unsigned long flags;
@@ -863,11 +904,38 @@
fde->instructions = p;
fde->end = end;
- fde->mod = mod;
-
/* Add to list. */
spin_lock_irqsave(&dwarf_fde_lock, flags);
- list_add_tail(&fde->link, &dwarf_fde_list);
+
+ while (*rb_node) {
+ struct dwarf_fde *fde_tmp;
+ unsigned long tmp_start, tmp_end;
+ unsigned long start, end;
+
+ fde_tmp = rb_entry(*rb_node, struct dwarf_fde, node);
+
+ start = fde->initial_location;
+ end = fde->initial_location + fde->address_range;
+
+ tmp_start = fde_tmp->initial_location;
+ tmp_end = fde_tmp->initial_location + fde_tmp->address_range;
+
+ parent = *rb_node;
+
+ if (start < tmp_start)
+ rb_node = &parent->rb_left;
+ else if (start >= tmp_end)
+ rb_node = &parent->rb_right;
+ else
+ WARN_ON(1);
+ }
+
+ rb_link_node(&fde->node, parent, rb_node);
+ rb_insert_color(&fde->node, &fde_root);
+
+ if (mod != NULL)
+ list_add_tail(&fde->link, &mod->arch.fde_list);
+
spin_unlock_irqrestore(&dwarf_fde_lock, flags);
return 0;
@@ -912,19 +980,29 @@
static void dwarf_unwinder_cleanup(void)
{
- struct dwarf_cie *cie, *cie_tmp;
- struct dwarf_fde *fde, *fde_tmp;
+ struct rb_node **fde_rb_node = &fde_root.rb_node;
+ struct rb_node **cie_rb_node = &cie_root.rb_node;
/*
* Deallocate all the memory allocated for the DWARF unwinder.
* Traverse all the FDE/CIE lists and remove and free all the
* memory associated with those data structures.
*/
- list_for_each_entry_safe(cie, cie_tmp, &dwarf_cie_list, link)
- kfree(cie);
+ while (*fde_rb_node) {
+ struct dwarf_fde *fde;
- list_for_each_entry_safe(fde, fde_tmp, &dwarf_fde_list, link)
+ fde = rb_entry(*fde_rb_node, struct dwarf_fde, node);
+ rb_erase(*fde_rb_node, &fde_root);
kfree(fde);
+ }
+
+ while (*cie_rb_node) {
+ struct dwarf_cie *cie;
+
+ cie = rb_entry(*cie_rb_node, struct dwarf_cie, node);
+ rb_erase(*cie_rb_node, &cie_root);
+ kfree(cie);
+ }
kmem_cache_destroy(dwarf_reg_cachep);
kmem_cache_destroy(dwarf_frame_cachep);
@@ -1024,6 +1102,8 @@
/* Did we find the .eh_frame section? */
if (i != hdr->e_shnum) {
+ INIT_LIST_HEAD(&me->arch.cie_list);
+ INIT_LIST_HEAD(&me->arch.fde_list);
err = dwarf_parse_section((char *)start, (char *)end, me);
if (err) {
printk(KERN_WARNING "%s: failed to parse DWARF info\n",
@@ -1044,38 +1124,26 @@
*/
void module_dwarf_cleanup(struct module *mod)
{
- struct dwarf_fde *fde;
- struct dwarf_cie *cie;
+ struct dwarf_fde *fde, *ftmp;
+ struct dwarf_cie *cie, *ctmp;
unsigned long flags;
spin_lock_irqsave(&dwarf_cie_lock, flags);
-again_cie:
- list_for_each_entry(cie, &dwarf_cie_list, link) {
- if (cie->mod == mod)
- break;
- }
-
- if (&cie->link != &dwarf_cie_list) {
+ list_for_each_entry_safe(cie, ctmp, &mod->arch.cie_list, link) {
list_del(&cie->link);
+ rb_erase(&cie->node, &cie_root);
kfree(cie);
- goto again_cie;
}
spin_unlock_irqrestore(&dwarf_cie_lock, flags);
spin_lock_irqsave(&dwarf_fde_lock, flags);
-again_fde:
- list_for_each_entry(fde, &dwarf_fde_list, link) {
- if (fde->mod == mod)
- break;
- }
-
- if (&fde->link != &dwarf_fde_list) {
+ list_for_each_entry_safe(fde, ftmp, &mod->arch.fde_list, link) {
list_del(&fde->link);
+ rb_erase(&fde->node, &fde_root);
kfree(fde);
- goto again_fde;
}
spin_unlock_irqrestore(&dwarf_fde_lock, flags);
@@ -1094,8 +1162,6 @@
static int __init dwarf_unwinder_init(void)
{
int err;
- INIT_LIST_HEAD(&dwarf_cie_list);
- INIT_LIST_HEAD(&dwarf_fde_list);
dwarf_frame_cachep = kmem_cache_create("dwarf_frames",
sizeof(struct dwarf_frame), 0,
diff --git a/arch/sh/kernel/early_printk.c b/arch/sh/kernel/early_printk.c
deleted file mode 100644
index f8bb50c..0000000
--- a/arch/sh/kernel/early_printk.c
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * arch/sh/kernel/early_printk.c
- *
- * Copyright (C) 1999, 2000 Niibe Yutaka
- * Copyright (C) 2002 M. R. Brown
- * Copyright (C) 2004 - 2007 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/console.h>
-#include <linux/tty.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/delay.h>
-
-#include <asm/sh_bios.h>
-
-/*
- * Print a string through the BIOS
- */
-static void sh_console_write(struct console *co, const char *s,
- unsigned count)
-{
- sh_bios_console_write(s, count);
-}
-
-/*
- * Setup initial baud/bits/parity. We do two things here:
- * - construct a cflag setting for the first rs_open()
- * - initialize the serial port
- * Return non-zero if we didn't find a serial port.
- */
-static int __init sh_console_setup(struct console *co, char *options)
-{
- int cflag = CREAD | HUPCL | CLOCAL;
-
- /*
- * Now construct a cflag setting.
- * TODO: this is a totally bogus cflag, as we have
- * no idea what serial settings the BIOS is using, or
- * even if its using the serial port at all.
- */
- cflag |= B115200 | CS8 | /*no parity*/0;
-
- co->cflag = cflag;
-
- return 0;
-}
-
-static struct console bios_console = {
- .name = "bios",
- .write = sh_console_write,
- .setup = sh_console_setup,
- .flags = CON_PRINTBUFFER,
- .index = -1,
-};
-
-static struct console *early_console;
-
-static int __init setup_early_printk(char *buf)
-{
- int keep_early = 0;
-
- if (!buf)
- return 0;
-
- if (strstr(buf, "keep"))
- keep_early = 1;
-
- if (!strncmp(buf, "bios", 4))
- early_console = &bios_console;
-
- if (likely(early_console)) {
- if (keep_early)
- early_console->flags &= ~CON_BOOT;
- else
- early_console->flags |= CON_BOOT;
- register_console(early_console);
- }
-
- return 0;
-}
-early_param("earlyprintk", setup_early_printk);
diff --git a/arch/sh/kernel/head_32.S b/arch/sh/kernel/head_32.S
index 1151ecd..fe0b743 100644
--- a/arch/sh/kernel/head_32.S
+++ b/arch/sh/kernel/head_32.S
@@ -3,6 +3,7 @@
* arch/sh/kernel/head.S
*
* Copyright (C) 1999, 2000 Niibe Yutaka & Kaz Kojima
+ * Copyright (C) 2010 Matt Fleming
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
@@ -13,6 +14,8 @@
#include <linux/init.h>
#include <linux/linkage.h>
#include <asm/thread_info.h>
+#include <asm/mmu.h>
+#include <cpu/mmu_context.h>
#ifdef CONFIG_CPU_SH4A
#define SYNCO() synco
@@ -33,7 +36,7 @@
.long 1 /* LOADER_TYPE */
.long 0x00000000 /* INITRD_START */
.long 0x00000000 /* INITRD_SIZE */
-#if defined(CONFIG_32BIT) && defined(CONFIG_PMB_FIXED)
+#ifdef CONFIG_32BIT
.long 0x53453f00 + 32 /* "SE?" = 32 bit */
#else
.long 0x53453f00 + 29 /* "SE?" = 29 bit */
@@ -82,6 +85,209 @@
ldc r0, r7_bank ! ... and initial thread_info
#endif
+#ifdef CONFIG_PMB
+/*
+ * Reconfigure the initial PMB mappings setup by the hardware.
+ *
+ * When we boot in 32-bit MMU mode there are 2 PMB entries already
+ * setup for us.
+ *
+ * Entry VPN PPN V SZ C UB WT
+ * ---------------------------------------------------------------
+ * 0 0x80000000 0x00000000 1 512MB 1 0 1
+ * 1 0xA0000000 0x00000000 1 512MB 0 0 0
+ *
+ * But we reprogram them here because we want complete control over
+ * our address space and the initial mappings may not map PAGE_OFFSET
+ * to __MEMORY_START (or even map all of our RAM).
+ *
+ * Once we've setup cached and uncached mappings we clear the rest of the
+ * PMB entries. This clearing also deals with the fact that PMB entries
+ * can persist across reboots. The PMB could have been left in any state
+ * when the reboot occurred, so to be safe we clear all entries and start
+ * with with a clean slate.
+ *
+ * The uncached mapping is constructed using the smallest possible
+ * mapping with a single unbufferable page. Only the kernel text needs to
+ * be covered via the uncached mapping so that certain functions can be
+ * run uncached.
+ *
+ * Drivers and the like that have previously abused the 1:1 identity
+ * mapping are unsupported in 32-bit mode and must specify their caching
+ * preference when page tables are constructed.
+ *
+ * This frees up the P2 space for more nefarious purposes.
+ *
+ * Register utilization is as follows:
+ *
+ * r0 = PMB_DATA data field
+ * r1 = PMB_DATA address field
+ * r2 = PMB_ADDR data field
+ * r3 = PMB_ADDR address field
+ * r4 = PMB_E_SHIFT
+ * r5 = remaining amount of RAM to map
+ * r6 = PMB mapping size we're trying to use
+ * r7 = cached_to_uncached
+ * r8 = scratch register
+ * r9 = scratch register
+ * r10 = number of PMB entries we've setup
+ */
+
+ mov.l .LMMUCR, r1 /* Flush the TLB */
+ mov.l @r1, r0
+ or #MMUCR_TI, r0
+ mov.l r0, @r1
+
+ mov.l .LMEMORY_SIZE, r5
+
+ mov #PMB_E_SHIFT, r0
+ mov #0x1, r4
+ shld r0, r4
+
+ mov.l .LFIRST_DATA_ENTRY, r0
+ mov.l .LPMB_DATA, r1
+ mov.l .LFIRST_ADDR_ENTRY, r2
+ mov.l .LPMB_ADDR, r3
+
+ /*
+ * First we need to walk the PMB and figure out if there are any
+ * existing mappings that match the initial mappings VPN/PPN.
+ * If these have already been established by the bootloader, we
+ * don't bother setting up new entries here, and let the late PMB
+ * initialization take care of things instead.
+ *
+ * Note that we may need to coalesce and merge entries in order
+ * to reclaim more available PMB slots, which is much more than
+ * we want to do at this early stage.
+ */
+ mov #0, r10
+ mov #NR_PMB_ENTRIES, r9
+
+ mov r1, r7 /* temporary PMB_DATA iter */
+
+.Lvalidate_existing_mappings:
+
+ mov.l @r7, r8
+ and r0, r8
+ cmp/eq r0, r8 /* Check for valid __MEMORY_START mappings */
+ bt .Lpmb_done
+
+ add #1, r10 /* Increment the loop counter */
+ cmp/eq r9, r10
+ bf/s .Lvalidate_existing_mappings
+ add r4, r7 /* Increment to the next PMB_DATA entry */
+
+ /*
+ * If we've fallen through, continue with setting up the initial
+ * mappings.
+ */
+
+ mov r5, r7 /* cached_to_uncached */
+ mov #0, r10
+
+#ifdef CONFIG_UNCACHED_MAPPING
+ /*
+ * Uncached mapping
+ */
+ mov #(PMB_SZ_16M >> 2), r9
+ shll2 r9
+
+ mov #(PMB_UB >> 8), r8
+ shll8 r8
+
+ or r0, r8
+ or r9, r8
+ mov.l r8, @r1
+ mov r2, r8
+ add r7, r8
+ mov.l r8, @r3
+
+ add r4, r1
+ add r4, r3
+ add #1, r10
+#endif
+
+/*
+ * Iterate over all of the available sizes from largest to
+ * smallest for constructing the cached mapping.
+ */
+#define __PMB_ITER_BY_SIZE(size) \
+.L##size: \
+ mov #(size >> 4), r6; \
+ shll16 r6; \
+ shll8 r6; \
+ \
+ cmp/hi r5, r6; \
+ bt 9999f; \
+ \
+ mov #(PMB_SZ_##size##M >> 2), r9; \
+ shll2 r9; \
+ \
+ /* \
+ * Cached mapping \
+ */ \
+ mov #PMB_C, r8; \
+ or r0, r8; \
+ or r9, r8; \
+ mov.l r8, @r1; \
+ mov.l r2, @r3; \
+ \
+ /* Increment to the next PMB_DATA entry */ \
+ add r4, r1; \
+ /* Increment to the next PMB_ADDR entry */ \
+ add r4, r3; \
+ /* Increment number of PMB entries */ \
+ add #1, r10; \
+ \
+ sub r6, r5; \
+ add r6, r0; \
+ add r6, r2; \
+ \
+ bra .L##size; \
+9999:
+
+ __PMB_ITER_BY_SIZE(512)
+ __PMB_ITER_BY_SIZE(128)
+ __PMB_ITER_BY_SIZE(64)
+ __PMB_ITER_BY_SIZE(16)
+
+#ifdef CONFIG_UNCACHED_MAPPING
+ /*
+ * Now that we can access it, update cached_to_uncached and
+ * uncached_size.
+ */
+ mov.l .Lcached_to_uncached, r0
+ mov.l r7, @r0
+
+ mov.l .Luncached_size, r0
+ mov #1, r7
+ shll16 r7
+ shll8 r7
+ mov.l r7, @r0
+#endif
+
+ /*
+ * Clear the remaining PMB entries.
+ *
+ * r3 = entry to begin clearing from
+ * r10 = number of entries we've setup so far
+ */
+ mov #0, r1
+ mov #NR_PMB_ENTRIES, r0
+
+.Lagain:
+ mov.l r1, @r3 /* Clear PMB_ADDR entry */
+ add #1, r10 /* Increment the loop counter */
+ cmp/eq r0, r10
+ bf/s .Lagain
+ add r4, r3 /* Increment to the next PMB_ADDR entry */
+
+ mov.l 6f, r0
+ icbi @r0
+
+.Lpmb_done:
+#endif /* CONFIG_PMB */
+
#ifndef CONFIG_SH_NO_BSS_INIT
/*
* Don't clear BSS if running on slow platforms such as an RTL simulation,
@@ -131,3 +337,16 @@
5: .long start_kernel
6: .long sh_cpu_init
7: .long init_thread_union
+
+#ifdef CONFIG_PMB
+.LPMB_ADDR: .long PMB_ADDR
+.LPMB_DATA: .long PMB_DATA
+.LFIRST_ADDR_ENTRY: .long PAGE_OFFSET | PMB_V
+.LFIRST_DATA_ENTRY: .long __MEMORY_START | PMB_V
+.LMMUCR: .long MMUCR
+.LMEMORY_SIZE: .long __MEMORY_SIZE
+#ifdef CONFIG_UNCACHED_MAPPING
+.Lcached_to_uncached: .long cached_to_uncached
+.Luncached_size: .long uncached_size
+#endif
+#endif
diff --git a/arch/sh/kernel/head_64.S b/arch/sh/kernel/head_64.S
index 3ea7658..defd851 100644
--- a/arch/sh/kernel/head_64.S
+++ b/arch/sh/kernel/head_64.S
@@ -220,7 +220,6 @@
add.l r22, r63, r22 /* Sign extend */
putcfg r21, 0, r22 /* Set MMUDR[0].PTEH */
-#ifdef CONFIG_EARLY_PRINTK
/*
* Setup a DTLB translation for SCIF phys.
*/
@@ -231,7 +230,6 @@
movi 0xfa03, r22 /* 0xfa030000, fixed SCIF virt */
shori 0x0003, r22
putcfg r21, 0, r22 /* PTEH last */
-#endif
/*
* Set cache behaviours.
diff --git a/arch/sh/kernel/hw_breakpoint.c b/arch/sh/kernel/hw_breakpoint.c
new file mode 100644
index 0000000..e2f1753
--- /dev/null
+++ b/arch/sh/kernel/hw_breakpoint.c
@@ -0,0 +1,463 @@
+/*
+ * arch/sh/kernel/hw_breakpoint.c
+ *
+ * Unified kernel/user-space hardware breakpoint facility for the on-chip UBC.
+ *
+ * Copyright (C) 2009 - 2010 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/perf_event.h>
+#include <linux/hw_breakpoint.h>
+#include <linux/percpu.h>
+#include <linux/kallsyms.h>
+#include <linux/notifier.h>
+#include <linux/kprobes.h>
+#include <linux/kdebug.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <asm/hw_breakpoint.h>
+#include <asm/mmu_context.h>
+#include <asm/ptrace.h>
+
+/*
+ * Stores the breakpoints currently in use on each breakpoint address
+ * register for each cpus
+ */
+static DEFINE_PER_CPU(struct perf_event *, bp_per_reg[HBP_NUM]);
+
+/*
+ * A dummy placeholder for early accesses until the CPUs get a chance to
+ * register their UBCs later in the boot process.
+ */
+static struct sh_ubc ubc_dummy = { .num_events = 0 };
+
+static struct sh_ubc *sh_ubc __read_mostly = &ubc_dummy;
+
+/*
+ * Install a perf counter breakpoint.
+ *
+ * We seek a free UBC channel and use it for this breakpoint.
+ *
+ * Atomic: we hold the counter->ctx->lock and we only handle variables
+ * and registers local to this cpu.
+ */
+int arch_install_hw_breakpoint(struct perf_event *bp)
+{
+ struct arch_hw_breakpoint *info = counter_arch_bp(bp);
+ int i;
+
+ for (i = 0; i < sh_ubc->num_events; i++) {
+ struct perf_event **slot = &__get_cpu_var(bp_per_reg[i]);
+
+ if (!*slot) {
+ *slot = bp;
+ break;
+ }
+ }
+
+ if (WARN_ONCE(i == sh_ubc->num_events, "Can't find any breakpoint slot"))
+ return -EBUSY;
+
+ clk_enable(sh_ubc->clk);
+ sh_ubc->enable(info, i);
+
+ return 0;
+}
+
+/*
+ * Uninstall the breakpoint contained in the given counter.
+ *
+ * First we search the debug address register it uses and then we disable
+ * it.
+ *
+ * Atomic: we hold the counter->ctx->lock and we only handle variables
+ * and registers local to this cpu.
+ */
+void arch_uninstall_hw_breakpoint(struct perf_event *bp)
+{
+ struct arch_hw_breakpoint *info = counter_arch_bp(bp);
+ int i;
+
+ for (i = 0; i < sh_ubc->num_events; i++) {
+ struct perf_event **slot = &__get_cpu_var(bp_per_reg[i]);
+
+ if (*slot == bp) {
+ *slot = NULL;
+ break;
+ }
+ }
+
+ if (WARN_ONCE(i == sh_ubc->num_events, "Can't find any breakpoint slot"))
+ return;
+
+ sh_ubc->disable(info, i);
+ clk_disable(sh_ubc->clk);
+}
+
+static int get_hbp_len(u16 hbp_len)
+{
+ unsigned int len_in_bytes = 0;
+
+ switch (hbp_len) {
+ case SH_BREAKPOINT_LEN_1:
+ len_in_bytes = 1;
+ break;
+ case SH_BREAKPOINT_LEN_2:
+ len_in_bytes = 2;
+ break;
+ case SH_BREAKPOINT_LEN_4:
+ len_in_bytes = 4;
+ break;
+ case SH_BREAKPOINT_LEN_8:
+ len_in_bytes = 8;
+ break;
+ }
+ return len_in_bytes;
+}
+
+/*
+ * Check for virtual address in user space.
+ */
+int arch_check_va_in_userspace(unsigned long va, u16 hbp_len)
+{
+ unsigned int len;
+
+ len = get_hbp_len(hbp_len);
+
+ return (va <= TASK_SIZE - len);
+}
+
+/*
+ * Check for virtual address in kernel space.
+ */
+static int arch_check_va_in_kernelspace(unsigned long va, u8 hbp_len)
+{
+ unsigned int len;
+
+ len = get_hbp_len(hbp_len);
+
+ return (va >= TASK_SIZE) && ((va + len - 1) >= TASK_SIZE);
+}
+
+/*
+ * Store a breakpoint's encoded address, length, and type.
+ */
+static int arch_store_info(struct perf_event *bp)
+{
+ struct arch_hw_breakpoint *info = counter_arch_bp(bp);
+
+ /*
+ * User-space requests will always have the address field populated
+ * For kernel-addresses, either the address or symbol name can be
+ * specified.
+ */
+ if (info->name)
+ info->address = (unsigned long)kallsyms_lookup_name(info->name);
+ if (info->address)
+ return 0;
+
+ return -EINVAL;
+}
+
+int arch_bp_generic_fields(int sh_len, int sh_type,
+ int *gen_len, int *gen_type)
+{
+ /* Len */
+ switch (sh_len) {
+ case SH_BREAKPOINT_LEN_1:
+ *gen_len = HW_BREAKPOINT_LEN_1;
+ break;
+ case SH_BREAKPOINT_LEN_2:
+ *gen_len = HW_BREAKPOINT_LEN_2;
+ break;
+ case SH_BREAKPOINT_LEN_4:
+ *gen_len = HW_BREAKPOINT_LEN_4;
+ break;
+ case SH_BREAKPOINT_LEN_8:
+ *gen_len = HW_BREAKPOINT_LEN_8;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* Type */
+ switch (sh_type) {
+ case SH_BREAKPOINT_READ:
+ *gen_type = HW_BREAKPOINT_R;
+ case SH_BREAKPOINT_WRITE:
+ *gen_type = HW_BREAKPOINT_W;
+ break;
+ case SH_BREAKPOINT_RW:
+ *gen_type = HW_BREAKPOINT_W | HW_BREAKPOINT_R;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int arch_build_bp_info(struct perf_event *bp)
+{
+ struct arch_hw_breakpoint *info = counter_arch_bp(bp);
+
+ info->address = bp->attr.bp_addr;
+
+ /* Len */
+ switch (bp->attr.bp_len) {
+ case HW_BREAKPOINT_LEN_1:
+ info->len = SH_BREAKPOINT_LEN_1;
+ break;
+ case HW_BREAKPOINT_LEN_2:
+ info->len = SH_BREAKPOINT_LEN_2;
+ break;
+ case HW_BREAKPOINT_LEN_4:
+ info->len = SH_BREAKPOINT_LEN_4;
+ break;
+ case HW_BREAKPOINT_LEN_8:
+ info->len = SH_BREAKPOINT_LEN_8;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* Type */
+ switch (bp->attr.bp_type) {
+ case HW_BREAKPOINT_R:
+ info->type = SH_BREAKPOINT_READ;
+ break;
+ case HW_BREAKPOINT_W:
+ info->type = SH_BREAKPOINT_WRITE;
+ break;
+ case HW_BREAKPOINT_W | HW_BREAKPOINT_R:
+ info->type = SH_BREAKPOINT_RW;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/*
+ * Validate the arch-specific HW Breakpoint register settings
+ */
+int arch_validate_hwbkpt_settings(struct perf_event *bp,
+ struct task_struct *tsk)
+{
+ struct arch_hw_breakpoint *info = counter_arch_bp(bp);
+ unsigned int align;
+ int ret;
+
+ ret = arch_build_bp_info(bp);
+ if (ret)
+ return ret;
+
+ ret = -EINVAL;
+
+ switch (info->len) {
+ case SH_BREAKPOINT_LEN_1:
+ align = 0;
+ break;
+ case SH_BREAKPOINT_LEN_2:
+ align = 1;
+ break;
+ case SH_BREAKPOINT_LEN_4:
+ align = 3;
+ break;
+ case SH_BREAKPOINT_LEN_8:
+ align = 7;
+ break;
+ default:
+ return ret;
+ }
+
+ ret = arch_store_info(bp);
+
+ if (ret < 0)
+ return ret;
+
+ /*
+ * Check that the low-order bits of the address are appropriate
+ * for the alignment implied by len.
+ */
+ if (info->address & align)
+ return -EINVAL;
+
+ /* Check that the virtual address is in the proper range */
+ if (tsk) {
+ if (!arch_check_va_in_userspace(info->address, info->len))
+ return -EFAULT;
+ } else {
+ if (!arch_check_va_in_kernelspace(info->address, info->len))
+ return -EFAULT;
+ }
+
+ return 0;
+}
+
+/*
+ * Release the user breakpoints used by ptrace
+ */
+void flush_ptrace_hw_breakpoint(struct task_struct *tsk)
+{
+ int i;
+ struct thread_struct *t = &tsk->thread;
+
+ for (i = 0; i < sh_ubc->num_events; i++) {
+ unregister_hw_breakpoint(t->ptrace_bps[i]);
+ t->ptrace_bps[i] = NULL;
+ }
+}
+
+static int __kprobes hw_breakpoint_handler(struct die_args *args)
+{
+ int cpu, i, rc = NOTIFY_STOP;
+ struct perf_event *bp;
+ unsigned int cmf, resume_mask;
+
+ /*
+ * Do an early return if none of the channels triggered.
+ */
+ cmf = sh_ubc->triggered_mask();
+ if (unlikely(!cmf))
+ return NOTIFY_DONE;
+
+ /*
+ * By default, resume all of the active channels.
+ */
+ resume_mask = sh_ubc->active_mask();
+
+ /*
+ * Disable breakpoints during exception handling.
+ */
+ sh_ubc->disable_all();
+
+ cpu = get_cpu();
+ for (i = 0; i < sh_ubc->num_events; i++) {
+ unsigned long event_mask = (1 << i);
+
+ if (likely(!(cmf & event_mask)))
+ continue;
+
+ /*
+ * The counter may be concurrently released but that can only
+ * occur from a call_rcu() path. We can then safely fetch
+ * the breakpoint, use its callback, touch its counter
+ * while we are in an rcu_read_lock() path.
+ */
+ rcu_read_lock();
+
+ bp = per_cpu(bp_per_reg[i], cpu);
+ if (bp)
+ rc = NOTIFY_DONE;
+
+ /*
+ * Reset the condition match flag to denote completion of
+ * exception handling.
+ */
+ sh_ubc->clear_triggered_mask(event_mask);
+
+ /*
+ * bp can be NULL due to concurrent perf counter
+ * removing.
+ */
+ if (!bp) {
+ rcu_read_unlock();
+ break;
+ }
+
+ /*
+ * Don't restore the channel if the breakpoint is from
+ * ptrace, as it always operates in one-shot mode.
+ */
+ if (bp->overflow_handler == ptrace_triggered)
+ resume_mask &= ~(1 << i);
+
+ perf_bp_event(bp, args->regs);
+
+ /* Deliver the signal to userspace */
+ if (arch_check_va_in_userspace(bp->attr.bp_addr,
+ bp->attr.bp_len)) {
+ siginfo_t info;
+
+ info.si_signo = args->signr;
+ info.si_errno = notifier_to_errno(rc);
+ info.si_code = TRAP_HWBKPT;
+
+ force_sig_info(args->signr, &info, current);
+ }
+
+ rcu_read_unlock();
+ }
+
+ if (cmf == 0)
+ rc = NOTIFY_DONE;
+
+ sh_ubc->enable_all(resume_mask);
+
+ put_cpu();
+
+ return rc;
+}
+
+BUILD_TRAP_HANDLER(breakpoint)
+{
+ unsigned long ex = lookup_exception_vector();
+ TRAP_HANDLER_DECL;
+
+ notify_die(DIE_BREAKPOINT, "breakpoint", regs, 0, ex, SIGTRAP);
+}
+
+/*
+ * Handle debug exception notifications.
+ */
+int __kprobes hw_breakpoint_exceptions_notify(struct notifier_block *unused,
+ unsigned long val, void *data)
+{
+ struct die_args *args = data;
+
+ if (val != DIE_BREAKPOINT)
+ return NOTIFY_DONE;
+
+ /*
+ * If the breakpoint hasn't been triggered by the UBC, it's
+ * probably from a debugger, so don't do anything more here.
+ *
+ * This also permits the UBC interface clock to remain off for
+ * non-UBC breakpoints, as we don't need to check the triggered
+ * or active channel masks.
+ */
+ if (args->trapnr != sh_ubc->trap_nr)
+ return NOTIFY_DONE;
+
+ return hw_breakpoint_handler(data);
+}
+
+void hw_breakpoint_pmu_read(struct perf_event *bp)
+{
+ /* TODO */
+}
+
+void hw_breakpoint_pmu_unthrottle(struct perf_event *bp)
+{
+ /* TODO */
+}
+
+int register_sh_ubc(struct sh_ubc *ubc)
+{
+ /* Bail if it's already assigned */
+ if (sh_ubc != &ubc_dummy)
+ return -EBUSY;
+ sh_ubc = ubc;
+
+ pr_info("HW Breakpoints: %s UBC support registered\n", ubc->name);
+
+ WARN_ON(ubc->num_events > HBP_NUM);
+
+ return 0;
+}
diff --git a/arch/sh/kernel/idle.c b/arch/sh/kernel/idle.c
index 6b3d706..0fd7b41 100644
--- a/arch/sh/kernel/idle.c
+++ b/arch/sh/kernel/idle.c
@@ -20,10 +20,9 @@
#include <asm/system.h>
#include <asm/atomic.h>
-static int hlt_counter;
void (*pm_idle)(void) = NULL;
-void (*pm_power_off)(void);
-EXPORT_SYMBOL(pm_power_off);
+
+static int hlt_counter;
static int __init nohlt_setup(char *__unused)
{
@@ -131,6 +130,15 @@
{
}
+void stop_this_cpu(void *unused)
+{
+ local_irq_disable();
+ cpu_clear(smp_processor_id(), cpu_online_map);
+
+ for (;;)
+ cpu_sleep();
+}
+
/*
* cpu_idle_wait - Used to ensure that all the CPUs discard old value of
* pm_idle and update to new pm_idle value. Required while changing pm_idle
diff --git a/arch/sh/kernel/io_trapped.c b/arch/sh/kernel/io_trapped.c
index 69be603..4a8bb4e 100644
--- a/arch/sh/kernel/io_trapped.c
+++ b/arch/sh/kernel/io_trapped.c
@@ -184,31 +184,31 @@
switch (src_len) {
case 1:
- tmp = ctrl_inb(src_addr);
+ tmp = __raw_readb(src_addr);
break;
case 2:
- tmp = ctrl_inw(src_addr);
+ tmp = __raw_readw(src_addr);
break;
case 4:
- tmp = ctrl_inl(src_addr);
+ tmp = __raw_readl(src_addr);
break;
case 8:
- tmp = ctrl_inq(src_addr);
+ tmp = __raw_readq(src_addr);
break;
}
switch (dst_len) {
case 1:
- ctrl_outb(tmp, dst_addr);
+ __raw_writeb(tmp, dst_addr);
break;
case 2:
- ctrl_outw(tmp, dst_addr);
+ __raw_writew(tmp, dst_addr);
break;
case 4:
- ctrl_outl(tmp, dst_addr);
+ __raw_writel(tmp, dst_addr);
break;
case 8:
- ctrl_outq(tmp, dst_addr);
+ __raw_writeq(tmp, dst_addr);
break;
}
@@ -271,6 +271,8 @@
insn_size_t instruction;
int tmp;
+ if (trapped_io_disable)
+ return 0;
if (!lookup_tiop(address))
return 0;
diff --git a/arch/sh/kernel/kgdb.c b/arch/sh/kernel/kgdb.c
index 3e532d0..70c6965 100644
--- a/arch/sh/kernel/kgdb.c
+++ b/arch/sh/kernel/kgdb.c
@@ -1,7 +1,7 @@
/*
* SuperH KGDB support
*
- * Copyright (C) 2008 Paul Mundt
+ * Copyright (C) 2008 - 2009 Paul Mundt
*
* Single stepping taken from the old stub by Henry Bell and Jeremy Siegel.
*
@@ -251,24 +251,60 @@
local_irq_restore(flags);
}
+static int __kgdb_notify(struct die_args *args, unsigned long cmd)
+{
+ int ret;
-BUILD_TRAP_HANDLER(breakpoint)
+ switch (cmd) {
+ case DIE_BREAKPOINT:
+ /*
+ * This means a user thread is single stepping
+ * a system call which should be ignored
+ */
+ if (test_thread_flag(TIF_SINGLESTEP))
+ return NOTIFY_DONE;
+
+ ret = kgdb_handle_exception(args->trapnr & 0xff, args->signr,
+ args->err, args->regs);
+ if (ret)
+ return NOTIFY_DONE;
+
+ break;
+ }
+
+ return NOTIFY_STOP;
+}
+
+static int
+kgdb_notify(struct notifier_block *self, unsigned long cmd, void *ptr)
{
unsigned long flags;
- TRAP_HANDLER_DECL;
+ int ret;
local_irq_save(flags);
- kgdb_handle_exception(vec >> 2, SIGTRAP, 0, regs);
+ ret = __kgdb_notify(ptr, cmd);
local_irq_restore(flags);
+
+ return ret;
}
+static struct notifier_block kgdb_notifier = {
+ .notifier_call = kgdb_notify,
+
+ /*
+ * Lowest-prio notifier priority, we want to be notified last:
+ */
+ .priority = -INT_MAX,
+};
+
int kgdb_arch_init(void)
{
- return 0;
+ return register_die_notifier(&kgdb_notifier);
}
void kgdb_arch_exit(void)
{
+ unregister_die_notifier(&kgdb_notifier);
}
struct kgdb_arch arch_kgdb_ops = {
diff --git a/arch/sh/kernel/machine_kexec.c b/arch/sh/kernel/machine_kexec.c
index 76f2802..7672141 100644
--- a/arch/sh/kernel/machine_kexec.c
+++ b/arch/sh/kernel/machine_kexec.c
@@ -21,6 +21,8 @@
#include <asm/mmu_context.h>
#include <asm/io.h>
#include <asm/cacheflush.h>
+#include <asm/sh_bios.h>
+#include <asm/reboot.h>
typedef void (*relocate_new_kernel_t)(unsigned long indirection_page,
unsigned long reboot_code_buffer,
@@ -28,15 +30,11 @@
extern const unsigned char relocate_new_kernel[];
extern const unsigned int relocate_new_kernel_size;
-extern void *gdb_vbr_vector;
extern void *vbr_base;
-void machine_shutdown(void)
+void native_machine_crash_shutdown(struct pt_regs *regs)
{
-}
-
-void machine_crash_shutdown(struct pt_regs *regs)
-{
+ /* Nothing to do for UP, but definitely broken for SMP.. */
}
/*
@@ -117,11 +115,7 @@
kexec_info(image);
flush_cache_all();
-#if defined(CONFIG_SH_STANDARD_BIOS)
- asm volatile("ldc %0, vbr" :
- : "r" (((unsigned long) gdb_vbr_vector) - 0x100)
- : "memory");
-#endif
+ sh_bios_vbr_reload();
/* now call it */
rnk = (relocate_new_kernel_t) reboot_code_buffer;
diff --git a/arch/sh/kernel/process.c b/arch/sh/kernel/process.c
new file mode 100644
index 0000000..81add9b
--- /dev/null
+++ b/arch/sh/kernel/process.c
@@ -0,0 +1,100 @@
+#include <linux/mm.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+
+struct kmem_cache *task_xstate_cachep = NULL;
+unsigned int xstate_size;
+
+int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
+{
+ *dst = *src;
+
+ if (src->thread.xstate) {
+ dst->thread.xstate = kmem_cache_alloc(task_xstate_cachep,
+ GFP_KERNEL);
+ if (!dst->thread.xstate)
+ return -ENOMEM;
+ memcpy(dst->thread.xstate, src->thread.xstate, xstate_size);
+ }
+
+ return 0;
+}
+
+void free_thread_xstate(struct task_struct *tsk)
+{
+ if (tsk->thread.xstate) {
+ kmem_cache_free(task_xstate_cachep, tsk->thread.xstate);
+ tsk->thread.xstate = NULL;
+ }
+}
+
+#if THREAD_SHIFT < PAGE_SHIFT
+static struct kmem_cache *thread_info_cache;
+
+struct thread_info *alloc_thread_info(struct task_struct *tsk)
+{
+ struct thread_info *ti;
+
+ ti = kmem_cache_alloc(thread_info_cache, GFP_KERNEL);
+ if (unlikely(ti == NULL))
+ return NULL;
+#ifdef CONFIG_DEBUG_STACK_USAGE
+ memset(ti, 0, THREAD_SIZE);
+#endif
+ return ti;
+}
+
+void free_thread_info(struct thread_info *ti)
+{
+ free_thread_xstate(ti->task);
+ kmem_cache_free(thread_info_cache, ti);
+}
+
+void thread_info_cache_init(void)
+{
+ thread_info_cache = kmem_cache_create("thread_info", THREAD_SIZE,
+ THREAD_SIZE, SLAB_PANIC, NULL);
+}
+#else
+struct thread_info *alloc_thread_info(struct task_struct *tsk)
+{
+#ifdef CONFIG_DEBUG_STACK_USAGE
+ gfp_t mask = GFP_KERNEL | __GFP_ZERO;
+#else
+ gfp_t mask = GFP_KERNEL;
+#endif
+ return (struct thread_info *)__get_free_pages(mask, THREAD_SIZE_ORDER);
+}
+
+void free_thread_info(struct thread_info *ti)
+{
+ free_thread_xstate(ti->task);
+ free_pages((unsigned long)ti, THREAD_SIZE_ORDER);
+}
+#endif /* THREAD_SHIFT < PAGE_SHIFT */
+
+void arch_task_cache_init(void)
+{
+ if (!xstate_size)
+ return;
+
+ task_xstate_cachep = kmem_cache_create("task_xstate", xstate_size,
+ __alignof__(union thread_xstate),
+ SLAB_PANIC | SLAB_NOTRACK, NULL);
+}
+
+#ifdef CONFIG_SH_FPU_EMU
+# define HAVE_SOFTFP 1
+#else
+# define HAVE_SOFTFP 0
+#endif
+
+void init_thread_xstate(void)
+{
+ if (boot_cpu_data.flags & CPU_HAS_FPU)
+ xstate_size = sizeof(struct sh_fpu_hard_struct);
+ else if (HAVE_SOFTFP)
+ xstate_size = sizeof(struct sh_fpu_soft_struct);
+ else
+ xstate_size = 0;
+}
diff --git a/arch/sh/kernel/process_32.c b/arch/sh/kernel/process_32.c
index d8af889..3cb88f1 100644
--- a/arch/sh/kernel/process_32.c
+++ b/arch/sh/kernel/process_32.c
@@ -16,65 +16,15 @@
#include <linux/module.h>
#include <linux/mm.h>
#include <linux/elfcore.h>
-#include <linux/pm.h>
#include <linux/kallsyms.h>
-#include <linux/kexec.h>
-#include <linux/kdebug.h>
-#include <linux/tick.h>
-#include <linux/reboot.h>
#include <linux/fs.h>
#include <linux/ftrace.h>
-#include <linux/preempt.h>
+#include <linux/hw_breakpoint.h>
#include <asm/uaccess.h>
#include <asm/mmu_context.h>
-#include <asm/pgalloc.h>
#include <asm/system.h>
-#include <asm/ubc.h>
#include <asm/fpu.h>
#include <asm/syscalls.h>
-#include <asm/watchdog.h>
-
-int ubc_usercnt = 0;
-
-#ifdef CONFIG_32BIT
-static void watchdog_trigger_immediate(void)
-{
- sh_wdt_write_cnt(0xFF);
- sh_wdt_write_csr(0xC2);
-}
-
-void machine_restart(char * __unused)
-{
- local_irq_disable();
-
- /* Use watchdog timer to trigger reset */
- watchdog_trigger_immediate();
-
- while (1)
- cpu_sleep();
-}
-#else
-void machine_restart(char * __unused)
-{
- /* SR.BL=1 and invoke address error to let CPU reset (manual reset) */
- asm volatile("ldc %0, sr\n\t"
- "mov.l @%1, %0" : : "r" (0x10000000), "r" (0x80000001));
-}
-#endif
-
-void machine_halt(void)
-{
- local_irq_disable();
-
- while (1)
- cpu_sleep();
-}
-
-void machine_power_off(void)
-{
- if (pm_power_off)
- pm_power_off();
-}
void show_regs(struct pt_regs * regs)
{
@@ -91,7 +41,7 @@
printk("PC : %08lx SP : %08lx SR : %08lx ",
regs->pc, regs->regs[15], regs->sr);
#ifdef CONFIG_MMU
- printk("TEA : %08x\n", ctrl_inl(MMU_TEA));
+ printk("TEA : %08x\n", __raw_readl(MMU_TEA));
#else
printk("\n");
#endif
@@ -147,21 +97,34 @@
}
EXPORT_SYMBOL(kernel_thread);
+void start_thread(struct pt_regs *regs, unsigned long new_pc,
+ unsigned long new_sp)
+{
+ set_fs(USER_DS);
+
+ regs->pr = 0;
+ regs->sr = SR_FD;
+ regs->pc = new_pc;
+ regs->regs[15] = new_sp;
+
+ free_thread_xstate(current);
+}
+EXPORT_SYMBOL(start_thread);
+
/*
* Free current thread data structures etc..
*/
void exit_thread(void)
{
- if (current->thread.ubc_pc) {
- current->thread.ubc_pc = 0;
- ubc_usercnt -= 1;
- }
}
void flush_thread(void)
{
-#if defined(CONFIG_SH_FPU)
struct task_struct *tsk = current;
+
+ flush_ptrace_hw_breakpoint(tsk);
+
+#if defined(CONFIG_SH_FPU)
/* Forget lazy FPU state */
clear_fpu(tsk, task_pt_regs(tsk));
clear_used_math();
@@ -209,11 +172,10 @@
{
struct thread_info *ti = task_thread_info(p);
struct pt_regs *childregs;
-#if defined(CONFIG_SH_DSP)
- struct task_struct *tsk = current;
-#endif
#if defined(CONFIG_SH_DSP)
+ struct task_struct *tsk = current;
+
if (is_dsp_enabled(tsk)) {
/* We can use the __save_dsp or just copy the struct:
* __save_dsp(p);
@@ -244,53 +206,11 @@
p->thread.sp = (unsigned long) childregs;
p->thread.pc = (unsigned long) ret_from_fork;
- p->thread.ubc_pc = 0;
+ memset(p->thread.ptrace_bps, 0, sizeof(p->thread.ptrace_bps));
return 0;
}
-/* Tracing by user break controller. */
-static void ubc_set_tracing(int asid, unsigned long pc)
-{
-#if defined(CONFIG_CPU_SH4A)
- unsigned long val;
-
- val = (UBC_CBR_ID_INST | UBC_CBR_RW_READ | UBC_CBR_CE);
- val |= (UBC_CBR_AIE | UBC_CBR_AIV_SET(asid));
-
- ctrl_outl(val, UBC_CBR0);
- ctrl_outl(pc, UBC_CAR0);
- ctrl_outl(0x0, UBC_CAMR0);
- ctrl_outl(0x0, UBC_CBCR);
-
- val = (UBC_CRR_RES | UBC_CRR_PCB | UBC_CRR_BIE);
- ctrl_outl(val, UBC_CRR0);
-
- /* Read UBC register that we wrote last, for checking update */
- val = ctrl_inl(UBC_CRR0);
-
-#else /* CONFIG_CPU_SH4A */
- ctrl_outl(pc, UBC_BARA);
-
-#ifdef CONFIG_MMU
- ctrl_outb(asid, UBC_BASRA);
-#endif
-
- ctrl_outl(0, UBC_BAMRA);
-
- if (current_cpu_data.type == CPU_SH7729 ||
- current_cpu_data.type == CPU_SH7710 ||
- current_cpu_data.type == CPU_SH7712 ||
- current_cpu_data.type == CPU_SH7203){
- ctrl_outw(BBR_INST | BBR_READ | BBR_CPU, UBC_BBRA);
- ctrl_outl(BRCR_PCBA | BRCR_PCTE, UBC_BRCR);
- } else {
- ctrl_outw(BBR_INST | BBR_READ, UBC_BBRA);
- ctrl_outw(BRCR_PCBA, UBC_BRCR);
- }
-#endif /* CONFIG_CPU_SH4A */
-}
-
/*
* switch_to(x,y) should switch tasks from x to y.
*
@@ -304,7 +224,7 @@
/* we're going to use this soon, after a few expensive things */
if (next->fpu_counter > 5)
- prefetch(&next_t->fpu.hard);
+ prefetch(next_t->xstate);
#ifdef CONFIG_MMU
/*
@@ -316,32 +236,13 @@
: "r" (task_thread_info(next)));
#endif
- /* If no tasks are using the UBC, we're done */
- if (ubc_usercnt == 0)
- /* If no tasks are using the UBC, we're done */;
- else if (next->thread.ubc_pc && next->mm) {
- int asid = 0;
-#ifdef CONFIG_MMU
- asid |= cpu_asid(smp_processor_id(), next->mm);
-#endif
- ubc_set_tracing(asid, next->thread.ubc_pc);
- } else {
-#if defined(CONFIG_CPU_SH4A)
- ctrl_outl(UBC_CBR_INIT, UBC_CBR0);
- ctrl_outl(UBC_CRR_INIT, UBC_CRR0);
-#else
- ctrl_outw(0, UBC_BBRA);
- ctrl_outw(0, UBC_BBRB);
-#endif
- }
-
/*
* If the task has used fpu the last 5 timeslices, just do a full
* restore of the math state immediately to avoid the trap; the
* chances of needing FPU soon are obviously high now
*/
if (next->fpu_counter > 5)
- fpu_state_restore(task_pt_regs(next));
+ __fpu_state_restore();
return prev;
}
@@ -434,20 +335,3 @@
return pc;
}
-
-asmlinkage void break_point_trap(void)
-{
- /* Clear tracing. */
-#if defined(CONFIG_CPU_SH4A)
- ctrl_outl(UBC_CBR_INIT, UBC_CBR0);
- ctrl_outl(UBC_CRR_INIT, UBC_CRR0);
-#else
- ctrl_outw(0, UBC_BBRA);
- ctrl_outw(0, UBC_BBRB);
- ctrl_outl(0, UBC_BRCR);
-#endif
- current->thread.ubc_pc = 0;
- ubc_usercnt -= 1;
-
- force_sig(SIGTRAP, current);
-}
diff --git a/arch/sh/kernel/process_64.c b/arch/sh/kernel/process_64.c
index ec79faf..c90957a 100644
--- a/arch/sh/kernel/process_64.c
+++ b/arch/sh/kernel/process_64.c
@@ -32,30 +32,7 @@
struct task_struct *last_task_used_math = NULL;
-void machine_restart(char * __unused)
-{
- extern void phys_stext(void);
-
- phys_stext();
-}
-
-void machine_halt(void)
-{
- for (;;);
-}
-
-void machine_power_off(void)
-{
- __asm__ __volatile__ (
- "sleep\n\t"
- "synci\n\t"
- "nop;nop;nop;nop\n\t"
- );
-
- panic("Unexpected wakeup!\n");
-}
-
-void show_regs(struct pt_regs * regs)
+void show_regs(struct pt_regs *regs)
{
unsigned long long ah, al, bh, bl, ch, cl;
@@ -410,7 +387,7 @@
regs->sr |= SR_FD;
}
- memcpy(fpu, &tsk->thread.fpu.hard, sizeof(*fpu));
+ memcpy(fpu, &tsk->thread.xstate->hardfpu, sizeof(*fpu));
}
return fpvalid;
diff --git a/arch/sh/kernel/ptrace_32.c b/arch/sh/kernel/ptrace_32.c
index 9be35f3..c625cda 100644
--- a/arch/sh/kernel/ptrace_32.c
+++ b/arch/sh/kernel/ptrace_32.c
@@ -2,7 +2,7 @@
* SuperH process tracing
*
* Copyright (C) 1999, 2000 Kaz Kojima & Niibe Yutaka
- * Copyright (C) 2002 - 2008 Paul Mundt
+ * Copyright (C) 2002 - 2009 Paul Mundt
*
* Audit support by Yuichi Nakamura <ynakam@hitachisoft.jp>
*
@@ -26,6 +26,7 @@
#include <linux/tracehook.h>
#include <linux/elf.h>
#include <linux/regset.h>
+#include <linux/hw_breakpoint.h>
#include <asm/uaccess.h>
#include <asm/pgtable.h>
#include <asm/system.h>
@@ -63,33 +64,64 @@
return 0;
}
+void ptrace_triggered(struct perf_event *bp, int nmi,
+ struct perf_sample_data *data, struct pt_regs *regs)
+{
+ struct perf_event_attr attr;
+
+ /*
+ * Disable the breakpoint request here since ptrace has defined a
+ * one-shot behaviour for breakpoint exceptions.
+ */
+ attr = bp->attr;
+ attr.disabled = true;
+ modify_user_hw_breakpoint(bp, &attr);
+}
+
+static int set_single_step(struct task_struct *tsk, unsigned long addr)
+{
+ struct thread_struct *thread = &tsk->thread;
+ struct perf_event *bp;
+ struct perf_event_attr attr;
+
+ bp = thread->ptrace_bps[0];
+ if (!bp) {
+ hw_breakpoint_init(&attr);
+
+ attr.bp_addr = addr;
+ attr.bp_len = HW_BREAKPOINT_LEN_2;
+ attr.bp_type = HW_BREAKPOINT_R;
+
+ bp = register_user_hw_breakpoint(&attr, ptrace_triggered, tsk);
+ if (IS_ERR(bp))
+ return PTR_ERR(bp);
+
+ thread->ptrace_bps[0] = bp;
+ } else {
+ int err;
+
+ attr = bp->attr;
+ attr.bp_addr = addr;
+ err = modify_user_hw_breakpoint(bp, &attr);
+ if (unlikely(err))
+ return err;
+ }
+
+ return 0;
+}
+
void user_enable_single_step(struct task_struct *child)
{
- /* Next scheduling will set up UBC */
- if (child->thread.ubc_pc == 0)
- ubc_usercnt += 1;
-
- child->thread.ubc_pc = get_stack_long(child,
- offsetof(struct pt_regs, pc));
+ unsigned long pc = get_stack_long(child, offsetof(struct pt_regs, pc));
set_tsk_thread_flag(child, TIF_SINGLESTEP);
+
+ set_single_step(child, pc);
}
void user_disable_single_step(struct task_struct *child)
{
clear_tsk_thread_flag(child, TIF_SINGLESTEP);
-
- /*
- * Ensure the UBC is not programmed at the next context switch.
- *
- * Normally this is not needed but there are sequences such as
- * singlestep, signal delivery, and continue that leave the
- * ubc_pc non-zero leading to spurious SIGTRAPs.
- */
- if (child->thread.ubc_pc != 0) {
- ubc_usercnt -= 1;
- child->thread.ubc_pc = 0;
- }
}
/*
@@ -163,10 +195,10 @@
if ((boot_cpu_data.flags & CPU_HAS_FPU))
return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
- &target->thread.fpu.hard, 0, -1);
+ &target->thread.xstate->hardfpu, 0, -1);
return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
- &target->thread.fpu.soft, 0, -1);
+ &target->thread.xstate->softfpu, 0, -1);
}
static int fpregs_set(struct task_struct *target,
@@ -184,10 +216,10 @@
if ((boot_cpu_data.flags & CPU_HAS_FPU))
return user_regset_copyin(&pos, &count, &kbuf, &ubuf,
- &target->thread.fpu.hard, 0, -1);
+ &target->thread.xstate->hardfpu, 0, -1);
return user_regset_copyin(&pos, &count, &kbuf, &ubuf,
- &target->thread.fpu.soft, 0, -1);
+ &target->thread.xstate->softfpu, 0, -1);
}
static int fpregs_active(struct task_struct *target,
@@ -333,7 +365,7 @@
else
tmp = 0;
} else
- tmp = ((long *)&child->thread.fpu)
+ tmp = ((long *)child->thread.xstate)
[(addr - (long)&dummy->fpu) >> 2];
} else if (addr == (long) &dummy->u_fpvalid)
tmp = !!tsk_used_math(child);
@@ -362,7 +394,7 @@
else if (addr >= (long) &dummy->fpu &&
addr < (long) &dummy->u_fpvalid) {
set_stopped_child_used_math(child);
- ((long *)&child->thread.fpu)
+ ((long *)child->thread.xstate)
[(addr - (long)&dummy->fpu) >> 2] = data;
ret = 0;
} else if (addr == (long) &dummy->u_fpvalid) {
diff --git a/arch/sh/kernel/ptrace_64.c b/arch/sh/kernel/ptrace_64.c
index b063eb8..5fd644d 100644
--- a/arch/sh/kernel/ptrace_64.c
+++ b/arch/sh/kernel/ptrace_64.c
@@ -88,7 +88,7 @@
regs->sr |= SR_FD;
}
- tmp = ((long *)&task->thread.fpu)[addr / sizeof(unsigned long)];
+ tmp = ((long *)task->thread.xstate)[addr / sizeof(unsigned long)];
return tmp;
}
@@ -114,8 +114,7 @@
regs = (struct pt_regs*)((unsigned char *)task + THREAD_SIZE) - 1;
if (!tsk_used_math(task)) {
- fpinit(&task->thread.fpu.hard);
- set_stopped_child_used_math(task);
+ init_fpu(task);
} else if (last_task_used_math == task) {
enable_fpu();
save_fpu(task);
@@ -124,7 +123,7 @@
regs->sr |= SR_FD;
}
- ((long *)&task->thread.fpu)[addr / sizeof(unsigned long)] = data;
+ ((long *)task->thread.xstate)[addr / sizeof(unsigned long)] = data;
return 0;
}
@@ -226,7 +225,7 @@
return ret;
return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
- &target->thread.fpu.hard, 0, -1);
+ &target->thread.xstate->hardfpu, 0, -1);
}
static int fpregs_set(struct task_struct *target,
@@ -243,7 +242,7 @@
set_stopped_child_used_math(target);
return user_regset_copyin(&pos, &count, &kbuf, &ubuf,
- &target->thread.fpu.hard, 0, -1);
+ &target->thread.xstate->hardfpu, 0, -1);
}
static int fpregs_active(struct task_struct *target,
@@ -486,9 +485,10 @@
}
/* Called with interrupts disabled */
-asmlinkage void do_software_break_point(unsigned long long vec,
- struct pt_regs *regs)
+BUILD_TRAP_HANDLER(breakpoint)
{
+ TRAP_HANDLER_DECL;
+
/* We need to forward step the PC, to counteract the backstep done
in signal.c. */
local_irq_enable();
diff --git a/arch/sh/kernel/reboot.c b/arch/sh/kernel/reboot.c
new file mode 100644
index 0000000..b1fca66
--- /dev/null
+++ b/arch/sh/kernel/reboot.c
@@ -0,0 +1,98 @@
+#include <linux/pm.h>
+#include <linux/kexec.h>
+#include <linux/kernel.h>
+#include <linux/reboot.h>
+#include <linux/module.h>
+#ifdef CONFIG_SUPERH32
+#include <asm/watchdog.h>
+#endif
+#include <asm/addrspace.h>
+#include <asm/reboot.h>
+#include <asm/system.h>
+
+void (*pm_power_off)(void);
+EXPORT_SYMBOL(pm_power_off);
+
+#ifdef CONFIG_SUPERH32
+static void watchdog_trigger_immediate(void)
+{
+ sh_wdt_write_cnt(0xFF);
+ sh_wdt_write_csr(0xC2);
+}
+#endif
+
+static void native_machine_restart(char * __unused)
+{
+ local_irq_disable();
+
+ /* Address error with SR.BL=1 first. */
+ trigger_address_error();
+
+#ifdef CONFIG_SUPERH32
+ /* If that fails or is unsupported, go for the watchdog next. */
+ watchdog_trigger_immediate();
+#endif
+
+ /*
+ * Give up and sleep.
+ */
+ while (1)
+ cpu_sleep();
+}
+
+static void native_machine_shutdown(void)
+{
+ smp_send_stop();
+}
+
+static void native_machine_power_off(void)
+{
+ if (pm_power_off)
+ pm_power_off();
+}
+
+static void native_machine_halt(void)
+{
+ /* stop other cpus */
+ machine_shutdown();
+
+ /* stop this cpu */
+ stop_this_cpu(NULL);
+}
+
+struct machine_ops machine_ops = {
+ .power_off = native_machine_power_off,
+ .shutdown = native_machine_shutdown,
+ .restart = native_machine_restart,
+ .halt = native_machine_halt,
+#ifdef CONFIG_KEXEC
+ .crash_shutdown = native_machine_crash_shutdown,
+#endif
+};
+
+void machine_power_off(void)
+{
+ machine_ops.power_off();
+}
+
+void machine_shutdown(void)
+{
+ machine_ops.shutdown();
+}
+
+void machine_restart(char *cmd)
+{
+ machine_ops.restart(cmd);
+}
+
+void machine_halt(void)
+{
+ machine_ops.halt();
+}
+
+#ifdef CONFIG_KEXEC
+void machine_crash_shutdown(struct pt_regs *regs)
+{
+ machine_ops.crash_shutdown(regs);
+}
+#endif
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index 8b0e697..3459e70 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -421,6 +421,8 @@
parse_early_param();
+ uncached_init();
+
plat_early_device_setup();
/* Let earlyprintk output early console messages */
@@ -449,17 +451,15 @@
#ifdef CONFIG_DUMMY_CONSOLE
conswitchp = &dummy_con;
#endif
+ paging_init();
+ pmb_init();
+
+ ioremap_fixed_init();
/* Perform the machine specific initialisation */
if (likely(sh_mv.mv_setup))
sh_mv.mv_setup(cmdline_p);
- paging_init();
-
-#ifdef CONFIG_PMB_ENABLE
- pmb_init();
-#endif
-
#ifdef CONFIG_SMP
plat_smp_setup();
#endif
diff --git a/arch/sh/kernel/sh_bios.c b/arch/sh/kernel/sh_bios.c
index c852f78..47475cc 100644
--- a/arch/sh/kernel/sh_bios.c
+++ b/arch/sh/kernel/sh_bios.c
@@ -1,19 +1,30 @@
/*
- * linux/arch/sh/kernel/sh_bios.c
* C interface for trapping into the standard LinuxSH BIOS.
*
* Copyright (C) 2000 Greg Banks, Mitch Davis
+ * Copyright (C) 1999, 2000 Niibe Yutaka
+ * Copyright (C) 2002 M. R. Brown
+ * Copyright (C) 2004 - 2010 Paul Mundt
*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
*/
#include <linux/module.h>
+#include <linux/console.h>
+#include <linux/tty.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/delay.h>
#include <asm/sh_bios.h>
#define BIOS_CALL_CONSOLE_WRITE 0
#define BIOS_CALL_ETH_NODE_ADDR 10
#define BIOS_CALL_SHUTDOWN 11
-#define BIOS_CALL_CHAR_OUT 0x1f /* TODO: hack */
#define BIOS_CALL_GDB_DETACH 0xff
+void *gdb_vbr_vector = NULL;
+
static inline long sh_bios_call(long func, long arg0, long arg1, long arg2,
long arg3)
{
@@ -23,6 +34,9 @@
register long r6 __asm__("r6") = arg2;
register long r7 __asm__("r7") = arg3;
+ if (!gdb_vbr_vector)
+ return -ENOSYS;
+
__asm__ __volatile__("trapa #0x3f":"=z"(r0)
:"0"(r0), "r"(r4), "r"(r5), "r"(r6), "r"(r7)
:"memory");
@@ -34,11 +48,6 @@
sh_bios_call(BIOS_CALL_CONSOLE_WRITE, (long)buf, (long)len, 0, 0);
}
-void sh_bios_char_out(char ch)
-{
- sh_bios_call(BIOS_CALL_CHAR_OUT, ch, 0, 0, 0);
-}
-
void sh_bios_gdb_detach(void)
{
sh_bios_call(BIOS_CALL_GDB_DETACH, 0, 0, 0, 0);
@@ -55,3 +64,109 @@
{
sh_bios_call(BIOS_CALL_SHUTDOWN, how, 0, 0, 0);
}
+
+/*
+ * Read the old value of the VBR register to initialise the vector
+ * through which debug and BIOS traps are delegated by the Linux trap
+ * handler.
+ */
+void sh_bios_vbr_init(void)
+{
+ unsigned long vbr;
+
+ if (unlikely(gdb_vbr_vector))
+ return;
+
+ __asm__ __volatile__ ("stc vbr, %0" : "=r" (vbr));
+
+ if (vbr) {
+ gdb_vbr_vector = (void *)(vbr + 0x100);
+ printk(KERN_NOTICE "Setting GDB trap vector to %p\n",
+ gdb_vbr_vector);
+ } else
+ printk(KERN_NOTICE "SH-BIOS not detected\n");
+}
+
+/**
+ * sh_bios_vbr_reload - Re-load the system VBR from the BIOS vector.
+ *
+ * This can be used by save/restore code to reinitialize the system VBR
+ * from the fixed BIOS VBR. A no-op if no BIOS VBR is known.
+ */
+void sh_bios_vbr_reload(void)
+{
+ if (gdb_vbr_vector)
+ __asm__ __volatile__ (
+ "ldc %0, vbr"
+ :
+ : "r" (((unsigned long) gdb_vbr_vector) - 0x100)
+ : "memory"
+ );
+}
+
+/*
+ * Print a string through the BIOS
+ */
+static void sh_console_write(struct console *co, const char *s,
+ unsigned count)
+{
+ sh_bios_console_write(s, count);
+}
+
+/*
+ * Setup initial baud/bits/parity. We do two things here:
+ * - construct a cflag setting for the first rs_open()
+ * - initialize the serial port
+ * Return non-zero if we didn't find a serial port.
+ */
+static int __init sh_console_setup(struct console *co, char *options)
+{
+ int cflag = CREAD | HUPCL | CLOCAL;
+
+ /*
+ * Now construct a cflag setting.
+ * TODO: this is a totally bogus cflag, as we have
+ * no idea what serial settings the BIOS is using, or
+ * even if its using the serial port at all.
+ */
+ cflag |= B115200 | CS8 | /*no parity*/0;
+
+ co->cflag = cflag;
+
+ return 0;
+}
+
+static struct console bios_console = {
+ .name = "bios",
+ .write = sh_console_write,
+ .setup = sh_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+};
+
+static struct console *early_console;
+
+static int __init setup_early_printk(char *buf)
+{
+ int keep_early = 0;
+
+ if (!buf)
+ return 0;
+
+ if (strstr(buf, "keep"))
+ keep_early = 1;
+
+ if (!strncmp(buf, "bios", 4))
+ early_console = &bios_console;
+
+ if (likely(early_console)) {
+ if (keep_early)
+ early_console->flags &= ~CON_BOOT;
+ else
+ early_console->flags |= CON_BOOT;
+ register_console(early_console);
+ }
+
+ return 0;
+}
+early_param("earlyprintk", setup_early_printk);
diff --git a/arch/sh/kernel/signal_32.c b/arch/sh/kernel/signal_32.c
index 12815ce..579cd2c 100644
--- a/arch/sh/kernel/signal_32.c
+++ b/arch/sh/kernel/signal_32.c
@@ -150,7 +150,7 @@
return 0;
set_used_math();
- return __copy_from_user(&tsk->thread.fpu.hard, &sc->sc_fpregs[0],
+ return __copy_from_user(&tsk->thread.xstate->hardfpu, &sc->sc_fpregs[0],
sizeof(long)*(16*2+2));
}
@@ -175,7 +175,7 @@
clear_used_math();
unlazy_fpu(tsk, regs);
- return __copy_to_user(&sc->sc_fpregs[0], &tsk->thread.fpu.hard,
+ return __copy_to_user(&sc->sc_fpregs[0], &tsk->thread.xstate->hardfpu,
sizeof(long)*(16*2+2));
}
#endif /* CONFIG_SH_FPU */
@@ -528,7 +528,7 @@
/* fallthrough */
case -ERESTARTNOINTR:
regs->regs[0] = save_r0;
- regs->pc -= instruction_size(ctrl_inw(regs->pc - 4));
+ regs->pc -= instruction_size(__raw_readw(regs->pc - 4));
break;
}
}
@@ -626,9 +626,9 @@
regs->regs[0] == -ERESTARTSYS ||
regs->regs[0] == -ERESTARTNOINTR) {
regs->regs[0] = save_r0;
- regs->pc -= instruction_size(ctrl_inw(regs->pc - 4));
+ regs->pc -= instruction_size(__raw_readw(regs->pc - 4));
} else if (regs->regs[0] == -ERESTART_RESTARTBLOCK) {
- regs->pc -= instruction_size(ctrl_inw(regs->pc - 4));
+ regs->pc -= instruction_size(__raw_readw(regs->pc - 4));
regs->regs[3] = __NR_restart_syscall;
}
}
diff --git a/arch/sh/kernel/signal_64.c b/arch/sh/kernel/signal_64.c
index 580e97d..5a9f1f1 100644
--- a/arch/sh/kernel/signal_64.c
+++ b/arch/sh/kernel/signal_64.c
@@ -297,7 +297,7 @@
regs->sr |= SR_FD;
}
- err |= __copy_from_user(¤t->thread.fpu.hard, &sc->sc_fpregs[0],
+ err |= __copy_from_user(¤t->thread.xstate->hardfpu, &sc->sc_fpregs[0],
(sizeof(long long) * 32) + (sizeof(int) * 1));
return err;
@@ -322,7 +322,7 @@
regs->sr |= SR_FD;
}
- err |= __copy_to_user(&sc->sc_fpregs[0], ¤t->thread.fpu.hard,
+ err |= __copy_to_user(&sc->sc_fpregs[0], ¤t->thread.xstate->hardfpu,
(sizeof(long long) * 32) + (sizeof(int) * 1));
clear_used_math();
diff --git a/arch/sh/kernel/smp.c b/arch/sh/kernel/smp.c
index 983e079..e124cf7 100644
--- a/arch/sh/kernel/smp.c
+++ b/arch/sh/kernel/smp.c
@@ -161,15 +161,6 @@
plat_send_ipi(cpu, SMP_MSG_RESCHEDULE);
}
-static void stop_this_cpu(void *unused)
-{
- cpu_clear(smp_processor_id(), cpu_online_map);
- local_irq_disable();
-
- for (;;)
- cpu_relax();
-}
-
void smp_send_stop(void)
{
smp_call_function(stop_this_cpu, 0, 0);
diff --git a/arch/sh/kernel/traps.c b/arch/sh/kernel/traps.c
index 7b03633..0830c2a 100644
--- a/arch/sh/kernel/traps.c
+++ b/arch/sh/kernel/traps.c
@@ -58,7 +58,7 @@
TRAP_HANDLER_DECL;
/* Rewind */
- regs->pc -= instruction_size(ctrl_inw(regs->pc - 4));
+ regs->pc -= instruction_size(__raw_readw(regs->pc - 4));
if (notify_die(DIE_TRAP, "debug trap", regs, 0, vec & 0xff,
SIGTRAP) == NOTIFY_STOP)
@@ -75,7 +75,7 @@
TRAP_HANDLER_DECL;
/* Rewind */
- regs->pc -= instruction_size(ctrl_inw(regs->pc - 4));
+ regs->pc -= instruction_size(__raw_readw(regs->pc - 4));
if (notify_die(DIE_TRAP, "bug trap", regs, 0, TRAPA_BUG_OPCODE & 0xff,
SIGTRAP) == NOTIFY_STOP)
diff --git a/arch/sh/kernel/traps_32.c b/arch/sh/kernel/traps_32.c
index 86639be..c3d86fa 100644
--- a/arch/sh/kernel/traps_32.c
+++ b/arch/sh/kernel/traps_32.c
@@ -24,11 +24,10 @@
#include <linux/kdebug.h>
#include <linux/kexec.h>
#include <linux/limits.h>
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
#include <linux/sysfs.h>
+#include <linux/uaccess.h>
#include <asm/system.h>
-#include <asm/uaccess.h>
+#include <asm/alignment.h>
#include <asm/fpu.h>
#include <asm/kprobes.h>
@@ -47,73 +46,6 @@
#define TRAP_ILLEGAL_SLOT_INST 13
#endif
-static unsigned long se_user;
-static unsigned long se_sys;
-static unsigned long se_half;
-static unsigned long se_word;
-static unsigned long se_dword;
-static unsigned long se_multi;
-/* bitfield: 1: warn 2: fixup 4: signal -> combinations 2|4 && 1|2|4 are not
- valid! */
-static int se_usermode = 3;
-/* 0: no warning 1: print a warning message, disabled by default */
-static int se_kernmode_warn;
-
-#ifdef CONFIG_PROC_FS
-static const char *se_usermode_action[] = {
- "ignored",
- "warn",
- "fixup",
- "fixup+warn",
- "signal",
- "signal+warn"
-};
-
-static int alignment_proc_show(struct seq_file *m, void *v)
-{
- seq_printf(m, "User:\t\t%lu\n", se_user);
- seq_printf(m, "System:\t\t%lu\n", se_sys);
- seq_printf(m, "Half:\t\t%lu\n", se_half);
- seq_printf(m, "Word:\t\t%lu\n", se_word);
- seq_printf(m, "DWord:\t\t%lu\n", se_dword);
- seq_printf(m, "Multi:\t\t%lu\n", se_multi);
- seq_printf(m, "User faults:\t%i (%s)\n", se_usermode,
- se_usermode_action[se_usermode]);
- seq_printf(m, "Kernel faults:\t%i (fixup%s)\n", se_kernmode_warn,
- se_kernmode_warn ? "+warn" : "");
- return 0;
-}
-
-static int alignment_proc_open(struct inode *inode, struct file *file)
-{
- return single_open(file, alignment_proc_show, NULL);
-}
-
-static ssize_t alignment_proc_write(struct file *file,
- const char __user *buffer, size_t count, loff_t *pos)
-{
- int *data = PDE(file->f_path.dentry->d_inode)->data;
- char mode;
-
- if (count > 0) {
- if (get_user(mode, buffer))
- return -EFAULT;
- if (mode >= '0' && mode <= '5')
- *data = mode - '0';
- }
- return count;
-}
-
-static const struct file_operations alignment_proc_fops = {
- .owner = THIS_MODULE,
- .open = alignment_proc_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
- .write = alignment_proc_write,
-};
-#endif
-
static void dump_mem(const char *str, unsigned long bottom, unsigned long top)
{
unsigned long p;
@@ -265,10 +197,10 @@
count = 1<<(instruction&3);
switch (count) {
- case 1: se_half += 1; break;
- case 2: se_word += 1; break;
- case 4: se_dword += 1; break;
- case 8: se_multi += 1; break; /* ??? */
+ case 1: inc_unaligned_byte_access(); break;
+ case 2: inc_unaligned_word_access(); break;
+ case 4: inc_unaligned_dword_access(); break;
+ case 8: inc_unaligned_multi_access(); break;
}
ret = -EFAULT;
@@ -452,18 +384,8 @@
rm = regs->regs[index];
/* shout about fixups */
- if (!expected) {
- if (user_mode(regs) && (se_usermode & 1) && printk_ratelimit())
- pr_notice("Fixing up unaligned userspace access "
- "in \"%s\" pid=%d pc=0x%p ins=0x%04hx\n",
- current->comm, task_pid_nr(current),
- (void *)regs->pc, instruction);
- else if (se_kernmode_warn && printk_ratelimit())
- pr_notice("Fixing up unaligned kernel access "
- "in \"%s\" pid=%d pc=0x%p ins=0x%04hx\n",
- current->comm, task_pid_nr(current),
- (void *)regs->pc, instruction);
- }
+ if (!expected)
+ unaligned_fixups_notify(current, instruction, regs);
ret = -EFAULT;
switch (instruction&0xF000) {
@@ -616,10 +538,10 @@
if (user_mode(regs)) {
int si_code = BUS_ADRERR;
+ unsigned int user_action;
local_irq_enable();
-
- se_user += 1;
+ inc_unaligned_user_access();
set_fs(USER_DS);
if (copy_from_user(&instruction, (insn_size_t *)(regs->pc & ~1),
@@ -630,16 +552,12 @@
set_fs(oldfs);
/* shout about userspace fixups */
- if (se_usermode & 1)
- printk(KERN_NOTICE "Unaligned userspace access "
- "in \"%s\" pid=%d pc=0x%p ins=0x%04hx\n",
- current->comm, current->pid, (void *)regs->pc,
- instruction);
+ unaligned_fixups_notify(current, instruction, regs);
- if (se_usermode & 2)
+ user_action = unaligned_user_action();
+ if (user_action & UM_FIXUP)
goto fixup;
-
- if (se_usermode & 4)
+ if (user_action & UM_SIGNAL)
goto uspace_segv;
else {
/* ignore */
@@ -659,7 +577,7 @@
&user_mem_access, 0);
set_fs(oldfs);
- if (tmp==0)
+ if (tmp == 0)
return; /* sorted */
uspace_segv:
printk(KERN_NOTICE "Sending SIGBUS to \"%s\" due to unaligned "
@@ -672,7 +590,7 @@
info.si_addr = (void __user *)address;
force_sig_info(SIGBUS, &info, current);
} else {
- se_sys += 1;
+ inc_unaligned_kernel_access();
if (regs->pc & 1)
die("unaligned program counter", regs, error_code);
@@ -687,11 +605,7 @@
die("insn faulting in do_address_error", regs, 0);
}
- if (se_kernmode_warn)
- printk(KERN_NOTICE "Unaligned kernel access "
- "on behalf of \"%s\" pid=%d pc=0x%p ins=0x%04hx\n",
- current->comm, current->pid, (void *)regs->pc,
- instruction);
+ unaligned_fixups_notify(current, instruction, regs);
handle_unaligned_access(instruction, regs,
&user_mem_access, 0);
@@ -876,35 +790,10 @@
die_if_kernel("exception", regs, ex);
}
-#if defined(CONFIG_SH_STANDARD_BIOS)
-void *gdb_vbr_vector;
-
-static inline void __init gdb_vbr_init(void)
-{
- register unsigned long vbr;
-
- /*
- * Read the old value of the VBR register to initialise
- * the vector through which debug and BIOS traps are
- * delegated by the Linux trap handler.
- */
- asm volatile("stc vbr, %0" : "=r" (vbr));
-
- gdb_vbr_vector = (void *)(vbr + 0x100);
- printk("Setting GDB trap vector to 0x%08lx\n",
- (unsigned long)gdb_vbr_vector);
-}
-#endif
-
void __cpuinit per_cpu_trap_init(void)
{
extern void *vbr_base;
-#ifdef CONFIG_SH_STANDARD_BIOS
- if (raw_smp_processor_id() == 0)
- gdb_vbr_init();
-#endif
-
/* NOTE: The VBR value should be at P1
(or P2, virtural "fixed" address space).
It's definitely should not in physical address. */
@@ -956,11 +845,8 @@
#endif
#ifdef TRAP_UBC
- set_exception_table_vec(TRAP_UBC, break_point_trap);
+ set_exception_table_vec(TRAP_UBC, breakpoint_trap_handler);
#endif
-
- /* Setup VBR for boot cpu */
- per_cpu_trap_init();
}
void show_stack(struct task_struct *tsk, unsigned long *sp)
@@ -985,34 +871,3 @@
show_stack(NULL, NULL);
}
EXPORT_SYMBOL(dump_stack);
-
-#ifdef CONFIG_PROC_FS
-/*
- * This needs to be done after sysctl_init, otherwise sys/ will be
- * overwritten. Actually, this shouldn't be in sys/ at all since
- * it isn't a sysctl, and it doesn't contain sysctl information.
- * We now locate it in /proc/cpu/alignment instead.
- */
-static int __init alignment_init(void)
-{
- struct proc_dir_entry *dir, *res;
-
- dir = proc_mkdir("cpu", NULL);
- if (!dir)
- return -ENOMEM;
-
- res = proc_create_data("alignment", S_IWUSR | S_IRUGO, dir,
- &alignment_proc_fops, &se_usermode);
- if (!res)
- return -ENOMEM;
-
- res = proc_create_data("kernel_alignment", S_IWUSR | S_IRUGO, dir,
- &alignment_proc_fops, &se_kernmode_warn);
- if (!res)
- return -ENOMEM;
-
- return 0;
-}
-
-fs_initcall(alignment_init);
-#endif
diff --git a/arch/sh/kernel/traps_64.c b/arch/sh/kernel/traps_64.c
index d86f531..e3f92eb 100644
--- a/arch/sh/kernel/traps_64.c
+++ b/arch/sh/kernel/traps_64.c
@@ -611,19 +611,19 @@
switch (width_shift) {
case 2:
- current->thread.fpu.hard.fp_regs[destreg] = buflo;
+ current->thread.xstate->hardfpu.fp_regs[destreg] = buflo;
break;
case 3:
if (do_paired_load) {
- current->thread.fpu.hard.fp_regs[destreg] = buflo;
- current->thread.fpu.hard.fp_regs[destreg+1] = bufhi;
+ current->thread.xstate->hardfpu.fp_regs[destreg] = buflo;
+ current->thread.xstate->hardfpu.fp_regs[destreg+1] = bufhi;
} else {
#if defined(CONFIG_CPU_LITTLE_ENDIAN)
- current->thread.fpu.hard.fp_regs[destreg] = bufhi;
- current->thread.fpu.hard.fp_regs[destreg+1] = buflo;
+ current->thread.xstate->hardfpu.fp_regs[destreg] = bufhi;
+ current->thread.xstate->hardfpu.fp_regs[destreg+1] = buflo;
#else
- current->thread.fpu.hard.fp_regs[destreg] = buflo;
- current->thread.fpu.hard.fp_regs[destreg+1] = bufhi;
+ current->thread.xstate->hardfpu.fp_regs[destreg] = buflo;
+ current->thread.xstate->hardfpu.fp_regs[destreg+1] = bufhi;
#endif
}
break;
@@ -681,19 +681,19 @@
switch (width_shift) {
case 2:
- buflo = current->thread.fpu.hard.fp_regs[srcreg];
+ buflo = current->thread.xstate->hardfpu.fp_regs[srcreg];
break;
case 3:
if (do_paired_load) {
- buflo = current->thread.fpu.hard.fp_regs[srcreg];
- bufhi = current->thread.fpu.hard.fp_regs[srcreg+1];
+ buflo = current->thread.xstate->hardfpu.fp_regs[srcreg];
+ bufhi = current->thread.xstate->hardfpu.fp_regs[srcreg+1];
} else {
#if defined(CONFIG_CPU_LITTLE_ENDIAN)
- bufhi = current->thread.fpu.hard.fp_regs[srcreg];
- buflo = current->thread.fpu.hard.fp_regs[srcreg+1];
+ bufhi = current->thread.xstate->hardfpu.fp_regs[srcreg];
+ buflo = current->thread.xstate->hardfpu.fp_regs[srcreg+1];
#else
- buflo = current->thread.fpu.hard.fp_regs[srcreg];
- bufhi = current->thread.fpu.hard.fp_regs[srcreg+1];
+ buflo = current->thread.xstate->hardfpu.fp_regs[srcreg];
+ bufhi = current->thread.xstate->hardfpu.fp_regs[srcreg+1];
#endif
}
break;
diff --git a/arch/sh/kernel/vmlinux.lds.S b/arch/sh/kernel/vmlinux.lds.S
index a1e4ec2..7f8a709 100644
--- a/arch/sh/kernel/vmlinux.lds.S
+++ b/arch/sh/kernel/vmlinux.lds.S
@@ -3,7 +3,7 @@
* Written by Niibe Yutaka and Paul Mundt
*/
#ifdef CONFIG_SUPERH64
-#define LOAD_OFFSET CONFIG_PAGE_OFFSET
+#define LOAD_OFFSET PAGE_OFFSET
OUTPUT_ARCH(sh:sh5)
#else
#define LOAD_OFFSET 0
@@ -14,17 +14,16 @@
#include <asm/cache.h>
#include <asm/vmlinux.lds.h>
+#ifdef CONFIG_PMB
+ #define MEMORY_OFFSET 0
+#else
+ #define MEMORY_OFFSET __MEMORY_START
+#endif
+
ENTRY(_start)
SECTIONS
{
-#ifdef CONFIG_PMB_FIXED
- . = CONFIG_PAGE_OFFSET + (CONFIG_MEMORY_START & 0x1fffffff) +
- CONFIG_ZERO_PAGE_OFFSET;
-#elif defined(CONFIG_32BIT)
- . = CONFIG_PAGE_OFFSET + CONFIG_ZERO_PAGE_OFFSET;
-#else
- . = CONFIG_PAGE_OFFSET + CONFIG_MEMORY_START + CONFIG_ZERO_PAGE_OFFSET;
-#endif
+ . = PAGE_OFFSET + MEMORY_OFFSET + CONFIG_ZERO_PAGE_OFFSET;
_text = .; /* Text and read-only data */
@@ -35,12 +34,7 @@
.text : AT(ADDR(.text) - LOAD_OFFSET) {
HEAD_TEXT
TEXT_TEXT
-
-#ifdef CONFIG_SUPERH64
- *(.text64)
- *(.text..SHmedia32)
-#endif
-
+ EXTRA_TEXT
SCHED_TEXT
LOCK_TEXT
KPROBES_TEXT
@@ -51,24 +45,12 @@
} = 0x0009
EXCEPTION_TABLE(16)
-
NOTES
+
+ _sdata = .;
RO_DATA(PAGE_SIZE)
-
- /*
- * Code which must be executed uncached and the associated data
- */
- . = ALIGN(PAGE_SIZE);
- .uncached : AT(ADDR(.uncached) - LOAD_OFFSET) {
- __uncached_start = .;
- *(.uncached.text)
- *(.uncached.data)
- __uncached_end = .;
- }
-
RW_DATA_SECTION(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE)
-
- _edata = .; /* End of data section */
+ _edata = .;
DWARF_EH_FRAME
diff --git a/arch/sh/math-emu/math.c b/arch/sh/math-emu/math.c
index d6c15ca..1fcdb12 100644
--- a/arch/sh/math-emu/math.c
+++ b/arch/sh/math-emu/math.c
@@ -471,10 +471,10 @@
* denormal_to_double - Given denormalized float number,
* store double float
*
- * @fpu: Pointer to sh_fpu_hard structure
+ * @fpu: Pointer to sh_fpu_soft structure
* @n: Index to FP register
*/
-static void denormal_to_double(struct sh_fpu_hard_struct *fpu, int n)
+static void denormal_to_double(struct sh_fpu_soft_struct *fpu, int n)
{
unsigned long du, dl;
unsigned long x = fpu->fpul;
@@ -552,11 +552,11 @@
if ((finsn & 0xf1ff) == 0xf0ad) { /* fcnvsd */
struct task_struct *tsk = current;
- if ((tsk->thread.fpu.hard.fpscr & (1 << 17))) {
+ if ((tsk->thread.xstate->softfpu.fpscr & (1 << 17))) {
/* FPU error */
- denormal_to_double (&tsk->thread.fpu.hard,
+ denormal_to_double (&tsk->thread.xstate->softfpu,
(finsn >> 8) & 0xf);
- tsk->thread.fpu.hard.fpscr &=
+ tsk->thread.xstate->softfpu.fpscr &=
~(FPSCR_CAUSE_MASK | FPSCR_FLAG_MASK);
task_thread_info(tsk)->status |= TS_USEDFPU;
} else {
@@ -617,7 +617,7 @@
int do_fpu_inst(unsigned short inst, struct pt_regs *regs)
{
struct task_struct *tsk = current;
- struct sh_fpu_soft_struct *fpu = &(tsk->thread.fpu.soft);
+ struct sh_fpu_soft_struct *fpu = &(tsk->thread.xstate->softfpu);
if (!(task_thread_info(tsk)->status & TS_USEDFPU)) {
/* initialize once. */
diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig
index 986a71b..1445ca6 100644
--- a/arch/sh/mm/Kconfig
+++ b/arch/sh/mm/Kconfig
@@ -75,52 +75,25 @@
config 29BIT
def_bool !32BIT
depends on SUPERH32
+ select UNCACHED_MAPPING
config 32BIT
bool
default y if CPU_SH5
-config PMB_ENABLE
+config PMB
bool "Support 32-bit physical addressing through PMB"
depends on MMU && EXPERIMENTAL && CPU_SH4A && !CPU_SH4AL_DSP
- help
- If you say Y here, physical addressing will be extended to
- 32-bits through the SH-4A PMB. If this is not set, legacy
- 29-bit physical addressing will be used.
-
-choice
- prompt "PMB handling type"
- depends on PMB_ENABLE
- default PMB_FIXED
-
-config PMB
- bool "PMB"
- depends on MMU && EXPERIMENTAL && CPU_SH4A && !CPU_SH4AL_DSP
- help
- If you say Y here, physical addressing will be extended to
- 32-bits through the SH-4A PMB. If this is not set, legacy
- 29-bit physical addressing will be used.
-
-config PMB_FIXED
- bool "fixed PMB"
- depends on MMU && EXPERIMENTAL && CPU_SH4A && !CPU_SH4AL_DSP
select 32BIT
+ select UNCACHED_MAPPING
help
- If this option is enabled, fixed PMB mappings are inherited
- from the boot loader, and the kernel does not attempt dynamic
- management. This is the closest to legacy 29-bit physical mode,
- and allows systems to support up to 512MiB of system memory.
-
-endchoice
+ If you say Y here, physical addressing will be extended to
+ 32-bits through the SH-4A PMB. If this is not set, legacy
+ 29-bit physical addressing will be used.
config X2TLB
- bool "Enable extended TLB mode"
- depends on (CPU_SHX2 || CPU_SHX3) && MMU && EXPERIMENTAL
- help
- Selecting this option will enable the extended mode of the SH-X2
- TLB. For legacy SH-X behaviour and interoperability, say N. For
- all of the fun new features and a willingless to submit bug reports,
- say Y.
+ def_bool y
+ depends on (CPU_SHX2 || CPU_SHX3) && MMU
config VSYSCALL
bool "Support vsyscall page"
@@ -188,14 +161,19 @@
def_bool y
depends on MEMORY_HOTPLUG
+config IOREMAP_FIXED
+ def_bool y
+ depends on X2TLB || SUPERH64
+
+config UNCACHED_MAPPING
+ bool
+
choice
prompt "Kernel page size"
- default PAGE_SIZE_8KB if X2TLB
default PAGE_SIZE_4KB
config PAGE_SIZE_4KB
bool "4kB"
- depends on !MMU || !X2TLB
help
This is the default page size used by all SuperH CPUs.
diff --git a/arch/sh/mm/Makefile b/arch/sh/mm/Makefile
index 8a70535..3dc8a8a 100644
--- a/arch/sh/mm/Makefile
+++ b/arch/sh/mm/Makefile
@@ -2,7 +2,7 @@
# Makefile for the Linux SuperH-specific parts of the memory manager.
#
-obj-y := cache.o init.o consistent.o mmap.o
+obj-y := alignment.o cache.o init.o consistent.o mmap.o
cacheops-$(CONFIG_CPU_SH2) := cache-sh2.o
cacheops-$(CONFIG_CPU_SH2A) := cache-sh2a.o
@@ -15,7 +15,7 @@
mmu-y := nommu.o extable_32.o
mmu-$(CONFIG_MMU) := extable_$(BITS).o fault_$(BITS).o \
- ioremap_$(BITS).o kmap.o tlbflush_$(BITS).o
+ ioremap.o kmap.o pgtable.o tlbflush_$(BITS).o
obj-y += $(mmu-y)
obj-$(CONFIG_DEBUG_FS) += asids-debugfs.o
@@ -26,15 +26,17 @@
ifdef CONFIG_MMU
tlb-$(CONFIG_CPU_SH3) := tlb-sh3.o
-tlb-$(CONFIG_CPU_SH4) := tlb-sh4.o
+tlb-$(CONFIG_CPU_SH4) := tlb-sh4.o tlb-urb.o
tlb-$(CONFIG_CPU_SH5) := tlb-sh5.o
-tlb-$(CONFIG_CPU_HAS_PTEAEX) := tlb-pteaex.o
+tlb-$(CONFIG_CPU_HAS_PTEAEX) := tlb-pteaex.o tlb-urb.o
obj-y += $(tlb-y)
endif
obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
-obj-$(CONFIG_PMB_ENABLE) += pmb.o
+obj-$(CONFIG_PMB) += pmb.o
obj-$(CONFIG_NUMA) += numa.o
+obj-$(CONFIG_IOREMAP_FIXED) += ioremap_fixed.o
+obj-$(CONFIG_UNCACHED_MAPPING) += uncached.o
# Special flags for fault_64.o. This puts restrictions on the number of
# caller-save registers that the compiler can target when building this file.
diff --git a/arch/sh/mm/alignment.c b/arch/sh/mm/alignment.c
new file mode 100644
index 0000000..b2595b8
--- /dev/null
+++ b/arch/sh/mm/alignment.c
@@ -0,0 +1,189 @@
+/*
+ * Alignment access counters and corresponding user-space interfaces.
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Copyright (C) 2009 - 2010 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/seq_file.h>
+#include <linux/proc_fs.h>
+#include <linux/uaccess.h>
+#include <asm/alignment.h>
+#include <asm/processor.h>
+
+static unsigned long se_user;
+static unsigned long se_sys;
+static unsigned long se_half;
+static unsigned long se_word;
+static unsigned long se_dword;
+static unsigned long se_multi;
+/* bitfield: 1: warn 2: fixup 4: signal -> combinations 2|4 && 1|2|4 are not
+ valid! */
+static int se_usermode = UM_WARN | UM_FIXUP;
+/* 0: no warning 1: print a warning message, disabled by default */
+static int se_kernmode_warn;
+
+core_param(alignment, se_usermode, int, 0600);
+
+void inc_unaligned_byte_access(void)
+{
+ se_half++;
+}
+
+void inc_unaligned_word_access(void)
+{
+ se_word++;
+}
+
+void inc_unaligned_dword_access(void)
+{
+ se_dword++;
+}
+
+void inc_unaligned_multi_access(void)
+{
+ se_multi++;
+}
+
+void inc_unaligned_user_access(void)
+{
+ se_user++;
+}
+
+void inc_unaligned_kernel_access(void)
+{
+ se_sys++;
+}
+
+/*
+ * This defaults to the global policy which can be set from the command
+ * line, while processes can overload their preferences via prctl().
+ */
+unsigned int unaligned_user_action(void)
+{
+ unsigned int action = se_usermode;
+
+ if (current->thread.flags & SH_THREAD_UAC_SIGBUS) {
+ action &= ~UM_FIXUP;
+ action |= UM_SIGNAL;
+ }
+
+ if (current->thread.flags & SH_THREAD_UAC_NOPRINT)
+ action &= ~UM_WARN;
+
+ return action;
+}
+
+int get_unalign_ctl(struct task_struct *tsk, unsigned long addr)
+{
+ return put_user(tsk->thread.flags & SH_THREAD_UAC_MASK,
+ (unsigned int __user *)addr);
+}
+
+int set_unalign_ctl(struct task_struct *tsk, unsigned int val)
+{
+ tsk->thread.flags = (tsk->thread.flags & ~SH_THREAD_UAC_MASK) |
+ (val & SH_THREAD_UAC_MASK);
+ return 0;
+}
+
+void unaligned_fixups_notify(struct task_struct *tsk, insn_size_t insn,
+ struct pt_regs *regs)
+{
+ if (user_mode(regs) && (se_usermode & UM_WARN) && printk_ratelimit())
+ pr_notice("Fixing up unaligned userspace access "
+ "in \"%s\" pid=%d pc=0x%p ins=0x%04hx\n",
+ tsk->comm, task_pid_nr(tsk),
+ (void *)instruction_pointer(regs), insn);
+ else if (se_kernmode_warn && printk_ratelimit())
+ pr_notice("Fixing up unaligned kernel access "
+ "in \"%s\" pid=%d pc=0x%p ins=0x%04hx\n",
+ tsk->comm, task_pid_nr(tsk),
+ (void *)instruction_pointer(regs), insn);
+}
+
+static const char *se_usermode_action[] = {
+ "ignored",
+ "warn",
+ "fixup",
+ "fixup+warn",
+ "signal",
+ "signal+warn"
+};
+
+static int alignment_proc_show(struct seq_file *m, void *v)
+{
+ seq_printf(m, "User:\t\t%lu\n", se_user);
+ seq_printf(m, "System:\t\t%lu\n", se_sys);
+ seq_printf(m, "Half:\t\t%lu\n", se_half);
+ seq_printf(m, "Word:\t\t%lu\n", se_word);
+ seq_printf(m, "DWord:\t\t%lu\n", se_dword);
+ seq_printf(m, "Multi:\t\t%lu\n", se_multi);
+ seq_printf(m, "User faults:\t%i (%s)\n", se_usermode,
+ se_usermode_action[se_usermode]);
+ seq_printf(m, "Kernel faults:\t%i (fixup%s)\n", se_kernmode_warn,
+ se_kernmode_warn ? "+warn" : "");
+ return 0;
+}
+
+static int alignment_proc_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, alignment_proc_show, NULL);
+}
+
+static ssize_t alignment_proc_write(struct file *file,
+ const char __user *buffer, size_t count, loff_t *pos)
+{
+ int *data = PDE(file->f_path.dentry->d_inode)->data;
+ char mode;
+
+ if (count > 0) {
+ if (get_user(mode, buffer))
+ return -EFAULT;
+ if (mode >= '0' && mode <= '5')
+ *data = mode - '0';
+ }
+ return count;
+}
+
+static const struct file_operations alignment_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = alignment_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .write = alignment_proc_write,
+};
+
+/*
+ * This needs to be done after sysctl_init, otherwise sys/ will be
+ * overwritten. Actually, this shouldn't be in sys/ at all since
+ * it isn't a sysctl, and it doesn't contain sysctl information.
+ * We now locate it in /proc/cpu/alignment instead.
+ */
+static int __init alignment_init(void)
+{
+ struct proc_dir_entry *dir, *res;
+
+ dir = proc_mkdir("cpu", NULL);
+ if (!dir)
+ return -ENOMEM;
+
+ res = proc_create_data("alignment", S_IWUSR | S_IRUGO, dir,
+ &alignment_proc_fops, &se_usermode);
+ if (!res)
+ return -ENOMEM;
+
+ res = proc_create_data("kernel_alignment", S_IWUSR | S_IRUGO, dir,
+ &alignment_proc_fops, &se_kernmode_warn);
+ if (!res)
+ return -ENOMEM;
+
+ return 0;
+}
+fs_initcall(alignment_init);
diff --git a/arch/sh/mm/cache-debugfs.c b/arch/sh/mm/cache-debugfs.c
index 5ba067b..690ed01 100644
--- a/arch/sh/mm/cache-debugfs.c
+++ b/arch/sh/mm/cache-debugfs.c
@@ -22,8 +22,7 @@
CACHE_TYPE_UNIFIED,
};
-static int __uses_jump_to_uncached cache_seq_show(struct seq_file *file,
- void *iter)
+static int cache_seq_show(struct seq_file *file, void *iter)
{
unsigned int cache_type = (unsigned int)file->private;
struct cache_info *cache;
@@ -37,7 +36,7 @@
*/
jump_to_uncached();
- ccr = ctrl_inl(CCR);
+ ccr = __raw_readl(CCR);
if ((ccr & CCR_CACHE_ENABLE) == 0) {
back_to_cached();
@@ -90,7 +89,7 @@
for (addr = addrstart, line = 0;
addr < addrstart + waysize;
addr += cache->linesz, line++) {
- unsigned long data = ctrl_inl(addr);
+ unsigned long data = __raw_readl(addr);
/* Check the V bit, ignore invalid cachelines */
if ((data & 1) == 0)
diff --git a/arch/sh/mm/cache-sh2.c b/arch/sh/mm/cache-sh2.c
index 699a71f..defcf71 100644
--- a/arch/sh/mm/cache-sh2.c
+++ b/arch/sh/mm/cache-sh2.c
@@ -28,10 +28,10 @@
unsigned long addr = CACHE_OC_ADDRESS_ARRAY | (v & 0x00000ff0);
int way;
for (way = 0; way < 4; way++) {
- unsigned long data = ctrl_inl(addr | (way << 12));
+ unsigned long data = __raw_readl(addr | (way << 12));
if ((data & CACHE_PHYSADDR_MASK) == (v & CACHE_PHYSADDR_MASK)) {
data &= ~SH_CACHE_UPDATED;
- ctrl_outl(data, addr | (way << 12));
+ __raw_writel(data, addr | (way << 12));
}
}
}
@@ -47,7 +47,7 @@
& ~(L1_CACHE_BYTES-1);
for (v = begin; v < end; v+=L1_CACHE_BYTES)
- ctrl_outl((v & CACHE_PHYSADDR_MASK),
+ __raw_writel((v & CACHE_PHYSADDR_MASK),
CACHE_OC_ADDRESS_ARRAY | (v & 0x00000ff0) | 0x00000008);
}
@@ -63,9 +63,9 @@
local_irq_save(flags);
jump_to_uncached();
- ccr = ctrl_inl(CCR);
+ ccr = __raw_readl(CCR);
ccr |= CCR_CACHE_INVALIDATE;
- ctrl_outl(ccr, CCR);
+ __raw_writel(ccr, CCR);
back_to_cached();
local_irq_restore(flags);
@@ -78,7 +78,7 @@
& ~(L1_CACHE_BYTES-1);
for (v = begin; v < end; v+=L1_CACHE_BYTES)
- ctrl_outl((v & CACHE_PHYSADDR_MASK),
+ __raw_writel((v & CACHE_PHYSADDR_MASK),
CACHE_OC_ADDRESS_ARRAY | (v & 0x00000ff0) | 0x00000008);
#endif
}
diff --git a/arch/sh/mm/cache-sh2a.c b/arch/sh/mm/cache-sh2a.c
index 975899d..1f51225 100644
--- a/arch/sh/mm/cache-sh2a.c
+++ b/arch/sh/mm/cache-sh2a.c
@@ -32,10 +32,10 @@
unsigned long addr = CACHE_OC_ADDRESS_ARRAY | (v & 0x000007f0);
int way;
for (way = 0; way < 4; way++) {
- unsigned long data = ctrl_inl(addr | (way << 11));
+ unsigned long data = __raw_readl(addr | (way << 11));
if ((data & CACHE_PHYSADDR_MASK) == (v & CACHE_PHYSADDR_MASK)) {
data &= ~SH_CACHE_UPDATED;
- ctrl_outl(data, addr | (way << 11));
+ __raw_writel(data, addr | (way << 11));
}
}
}
@@ -58,7 +58,7 @@
jump_to_uncached();
for (v = begin; v < end; v+=L1_CACHE_BYTES) {
- ctrl_outl((v & CACHE_PHYSADDR_MASK),
+ __raw_writel((v & CACHE_PHYSADDR_MASK),
CACHE_OC_ADDRESS_ARRAY | (v & 0x000007f0) | 0x00000008);
}
back_to_cached();
@@ -78,17 +78,17 @@
jump_to_uncached();
#ifdef CONFIG_CACHE_WRITEBACK
- ctrl_outl(ctrl_inl(CCR) | CCR_OCACHE_INVALIDATE, CCR);
+ __raw_writel(__raw_readl(CCR) | CCR_OCACHE_INVALIDATE, CCR);
/* I-cache invalidate */
for (v = begin; v < end; v+=L1_CACHE_BYTES) {
- ctrl_outl((v & CACHE_PHYSADDR_MASK),
+ __raw_writel((v & CACHE_PHYSADDR_MASK),
CACHE_IC_ADDRESS_ARRAY | (v & 0x000007f0) | 0x00000008);
}
#else
for (v = begin; v < end; v+=L1_CACHE_BYTES) {
- ctrl_outl((v & CACHE_PHYSADDR_MASK),
+ __raw_writel((v & CACHE_PHYSADDR_MASK),
CACHE_IC_ADDRESS_ARRAY | (v & 0x000007f0) | 0x00000008);
- ctrl_outl((v & CACHE_PHYSADDR_MASK),
+ __raw_writel((v & CACHE_PHYSADDR_MASK),
CACHE_OC_ADDRESS_ARRAY | (v & 0x000007f0) | 0x00000008);
}
#endif
@@ -115,14 +115,14 @@
int way;
/* O-Cache writeback */
for (way = 0; way < 4; way++) {
- unsigned long data = ctrl_inl(CACHE_OC_ADDRESS_ARRAY | addr | (way << 11));
+ unsigned long data = __raw_readl(CACHE_OC_ADDRESS_ARRAY | addr | (way << 11));
if ((data & CACHE_PHYSADDR_MASK) == (v & CACHE_PHYSADDR_MASK)) {
data &= ~SH_CACHE_UPDATED;
- ctrl_outl(data, CACHE_OC_ADDRESS_ARRAY | addr | (way << 11));
+ __raw_writel(data, CACHE_OC_ADDRESS_ARRAY | addr | (way << 11));
}
}
/* I-Cache invalidate */
- ctrl_outl(addr,
+ __raw_writel(addr,
CACHE_IC_ADDRESS_ARRAY | addr | 0x00000008);
}
diff --git a/arch/sh/mm/cache-sh3.c b/arch/sh/mm/cache-sh3.c
index faef80c..e37523f 100644
--- a/arch/sh/mm/cache-sh3.c
+++ b/arch/sh/mm/cache-sh3.c
@@ -50,12 +50,12 @@
p = __pa(v);
addr = addrstart | (v & current_cpu_data.dcache.entry_mask);
local_irq_save(flags);
- data = ctrl_inl(addr);
+ data = __raw_readl(addr);
if ((data & CACHE_PHYSADDR_MASK) ==
(p & CACHE_PHYSADDR_MASK)) {
data &= ~SH_CACHE_UPDATED;
- ctrl_outl(data, addr);
+ __raw_writel(data, addr);
local_irq_restore(flags);
break;
}
@@ -86,7 +86,7 @@
data = (v & 0xfffffc00); /* _Virtual_ address, ~U, ~V */
addr = CACHE_OC_ADDRESS_ARRAY |
(v & current_cpu_data.dcache.entry_mask) | SH_CACHE_ASSOC;
- ctrl_outl(data, addr);
+ __raw_writel(data, addr);
}
}
diff --git a/arch/sh/mm/cache-sh4.c b/arch/sh/mm/cache-sh4.c
index 560ddb6..2cfae81 100644
--- a/arch/sh/mm/cache-sh4.c
+++ b/arch/sh/mm/cache-sh4.c
@@ -36,7 +36,7 @@
* Called from kernel/module.c:sys_init_module and routine for a.out format,
* signal handler code and kprobes code
*/
-static void __uses_jump_to_uncached sh4_flush_icache_range(void *args)
+static void sh4_flush_icache_range(void *args)
{
struct flusher_data *data = args;
unsigned long start, end;
@@ -109,6 +109,7 @@
static void sh4_flush_dcache_page(void *arg)
{
struct page *page = arg;
+ unsigned long addr = (unsigned long)page_address(page);
#ifndef CONFIG_SMP
struct address_space *mapping = page_mapping(page);
@@ -116,22 +117,14 @@
set_bit(PG_dcache_dirty, &page->flags);
else
#endif
- {
- unsigned long phys = page_to_phys(page);
- unsigned long addr = CACHE_OC_ADDRESS_ARRAY;
- int i, n;
-
- /* Loop all the D-cache */
- n = boot_cpu_data.dcache.n_aliases;
- for (i = 0; i < n; i++, addr += PAGE_SIZE)
- flush_cache_one(addr, phys);
- }
+ flush_cache_one(CACHE_OC_ADDRESS_ARRAY |
+ (addr & shm_align_mask), page_to_phys(page));
wmb();
}
/* TODO: Selective icache invalidation through IC address array.. */
-static void __uses_jump_to_uncached flush_icache_all(void)
+static void flush_icache_all(void)
{
unsigned long flags, ccr;
@@ -139,9 +132,9 @@
jump_to_uncached();
/* Flush I-cache */
- ccr = ctrl_inl(CCR);
+ ccr = __raw_readl(CCR);
ccr |= CCR_CACHE_ICI;
- ctrl_outl(ccr, CCR);
+ __raw_writel(ccr, CCR);
/*
* back_to_cached() will take care of the barrier for us, don't add
@@ -384,9 +377,9 @@
void __init sh4_cache_init(void)
{
printk("PVR=%08x CVR=%08x PRR=%08x\n",
- ctrl_inl(CCN_PVR),
- ctrl_inl(CCN_CVR),
- ctrl_inl(CCN_PRR));
+ __raw_readl(CCN_PVR),
+ __raw_readl(CCN_CVR),
+ __raw_readl(CCN_PRR));
local_flush_icache_range = sh4_flush_icache_range;
local_flush_dcache_page = sh4_flush_dcache_page;
diff --git a/arch/sh/mm/cache-sh7705.c b/arch/sh/mm/cache-sh7705.c
index f527fb7..f498da1 100644
--- a/arch/sh/mm/cache-sh7705.c
+++ b/arch/sh/mm/cache-sh7705.c
@@ -48,10 +48,10 @@
unsigned long data;
int v = SH_CACHE_UPDATED | SH_CACHE_VALID;
- data = ctrl_inl(addr);
+ data = __raw_readl(addr);
if ((data & v) == v)
- ctrl_outl(data & ~v, addr);
+ __raw_writel(data & ~v, addr);
}
@@ -78,7 +78,7 @@
/*
* Writeback&Invalidate the D-cache of the page
*/
-static void __uses_jump_to_uncached __flush_dcache_page(unsigned long phys)
+static void __flush_dcache_page(unsigned long phys)
{
unsigned long ways, waysize, addrstart;
unsigned long flags;
@@ -115,10 +115,10 @@
addr += current_cpu_data.dcache.linesz) {
unsigned long data;
- data = ctrl_inl(addr) & (0x1ffffC00 | SH_CACHE_VALID);
+ data = __raw_readl(addr) & (0x1ffffC00 | SH_CACHE_VALID);
if (data == phys) {
data &= ~(SH_CACHE_VALID | SH_CACHE_UPDATED);
- ctrl_outl(data, addr);
+ __raw_writel(data, addr);
}
}
@@ -144,7 +144,7 @@
__flush_dcache_page(__pa(page_address(page)));
}
-static void __uses_jump_to_uncached sh7705_flush_cache_all(void *args)
+static void sh7705_flush_cache_all(void *args)
{
unsigned long flags;
diff --git a/arch/sh/mm/cache.c b/arch/sh/mm/cache.c
index b8607fa..0f4095d 100644
--- a/arch/sh/mm/cache.c
+++ b/arch/sh/mm/cache.c
@@ -2,7 +2,7 @@
* arch/sh/mm/cache.c
*
* Copyright (C) 1999, 2000, 2002 Niibe Yutaka
- * Copyright (C) 2002 - 2009 Paul Mundt
+ * Copyright (C) 2002 - 2010 Paul Mundt
*
* Released under the terms of the GNU GPL v2.0.
*/
@@ -41,8 +41,17 @@
int wait)
{
preempt_disable();
- smp_call_function(func, info, wait);
+
+ /*
+ * It's possible that this gets called early on when IRQs are
+ * still disabled due to ioremapping by the boot CPU, so don't
+ * even attempt IPIs unless there are other CPUs online.
+ */
+ if (num_online_cpus() > 1)
+ smp_call_function(func, info, wait);
+
func(info);
+
preempt_enable();
}
diff --git a/arch/sh/mm/fault_32.c b/arch/sh/mm/fault_32.c
index 4753010..28e2283 100644
--- a/arch/sh/mm/fault_32.c
+++ b/arch/sh/mm/fault_32.c
@@ -53,6 +53,9 @@
if (!pud_present(*pud_k))
return NULL;
+ if (!pud_present(*pud))
+ set_pud(pud, *pud_k);
+
pmd = pmd_offset(pud, address);
pmd_k = pmd_offset(pud_k, address);
if (!pmd_present(*pmd_k))
diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c
index 432acd0..68028e8 100644
--- a/arch/sh/mm/init.c
+++ b/arch/sh/mm/init.c
@@ -21,25 +21,13 @@
#include <asm/cacheflush.h>
#include <asm/sections.h>
#include <asm/cache.h>
+#include <asm/sizes.h>
DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
pgd_t swapper_pg_dir[PTRS_PER_PGD];
-#ifdef CONFIG_SUPERH32
-/*
- * Handle trivial transitions between cached and uncached
- * segments, making use of the 1:1 mapping relationship in
- * 512MB lowmem.
- *
- * This is the offset of the uncached section from its cached alias.
- * Default value only valid in 29 bit mode, in 32bit mode will be
- * overridden in pmb_init.
- */
-unsigned long cached_to_uncached = P2SEG - P1SEG;
-#endif
-
#ifdef CONFIG_MMU
-static void set_pte_phys(unsigned long addr, unsigned long phys, pgprot_t prot)
+static pte_t *__get_pte_phys(unsigned long addr)
{
pgd_t *pgd;
pud_t *pud;
@@ -49,22 +37,30 @@
pgd = pgd_offset_k(addr);
if (pgd_none(*pgd)) {
pgd_ERROR(*pgd);
- return;
+ return NULL;
}
pud = pud_alloc(NULL, pgd, addr);
if (unlikely(!pud)) {
pud_ERROR(*pud);
- return;
+ return NULL;
}
pmd = pmd_alloc(NULL, pud, addr);
if (unlikely(!pmd)) {
pmd_ERROR(*pmd);
- return;
+ return NULL;
}
pte = pte_offset_kernel(pmd, addr);
+ return pte;
+}
+
+static void set_pte_phys(unsigned long addr, unsigned long phys, pgprot_t prot)
+{
+ pte_t *pte;
+
+ pte = __get_pte_phys(addr);
if (!pte_none(*pte)) {
pte_ERROR(*pte);
return;
@@ -72,23 +68,24 @@
set_pte(pte, pfn_pte(phys >> PAGE_SHIFT, prot));
local_flush_tlb_one(get_asid(), addr);
+
+ if (pgprot_val(prot) & _PAGE_WIRED)
+ tlb_wire_entry(NULL, addr, *pte);
}
-/*
- * As a performance optimization, other platforms preserve the fixmap mapping
- * across a context switch, we don't presently do this, but this could be done
- * in a similar fashion as to the wired TLB interface that sh64 uses (by way
- * of the memory mapped UTLB configuration) -- this unfortunately forces us to
- * give up a TLB entry for each mapping we want to preserve. While this may be
- * viable for a small number of fixmaps, it's not particularly useful for
- * everything and needs to be carefully evaluated. (ie, we may want this for
- * the vsyscall page).
- *
- * XXX: Perhaps add a _PAGE_WIRED flag or something similar that we can pass
- * in at __set_fixmap() time to determine the appropriate behavior to follow.
- *
- * -- PFM.
- */
+static void clear_pte_phys(unsigned long addr, pgprot_t prot)
+{
+ pte_t *pte;
+
+ pte = __get_pte_phys(addr);
+
+ if (pgprot_val(prot) & _PAGE_WIRED)
+ tlb_unwire_entry();
+
+ set_pte(pte, pfn_pte(0, __pgprot(0)));
+ local_flush_tlb_one(get_asid(), addr);
+}
+
void __set_fixmap(enum fixed_addresses idx, unsigned long phys, pgprot_t prot)
{
unsigned long address = __fix_to_virt(idx);
@@ -101,6 +98,18 @@
set_pte_phys(address, phys, prot);
}
+void __clear_fixmap(enum fixed_addresses idx, pgprot_t prot)
+{
+ unsigned long address = __fix_to_virt(idx);
+
+ if (idx >= __end_of_fixed_addresses) {
+ BUG();
+ return;
+ }
+
+ clear_pte_phys(address, prot);
+}
+
void __init page_table_range_init(unsigned long start, unsigned long end,
pgd_t *pgd_base)
{
@@ -120,7 +129,13 @@
for ( ; (i < PTRS_PER_PGD) && (vaddr != end); pgd++, i++) {
pud = (pud_t *)pgd;
for ( ; (j < PTRS_PER_PUD) && (vaddr != end); pud++, j++) {
+#ifdef __PAGETABLE_PMD_FOLDED
pmd = (pmd_t *)pud;
+#else
+ pmd = (pmd_t *)alloc_bootmem_low_pages(PAGE_SIZE);
+ pud_populate(&init_mm, pud, pmd);
+ pmd += k;
+#endif
for (; (k < PTRS_PER_PMD) && (vaddr != end); pmd++, k++) {
if (pmd_none(*pmd)) {
pte = (pte_t *) alloc_bootmem_low_pages(PAGE_SIZE);
@@ -182,9 +197,6 @@
}
free_area_init_nodes(max_zone_pfns);
-
- /* Set up the uncached fixmap */
- set_fixmap_nocache(FIX_UNCACHED, __pa(&__uncached_start));
}
/*
@@ -195,6 +207,8 @@
no_iommu_init();
}
+unsigned int mem_init_done = 0;
+
void __init mem_init(void)
{
int codesize, datasize, initsize;
@@ -231,6 +245,8 @@
memset(empty_zero_page, 0, PAGE_SIZE);
__flush_wback_region(empty_zero_page, PAGE_SIZE);
+ vsyscall_init();
+
codesize = (unsigned long) &_etext - (unsigned long) &_text;
datasize = (unsigned long) &_edata - (unsigned long) &_etext;
initsize = (unsigned long) &__init_end - (unsigned long) &__init_begin;
@@ -243,8 +259,48 @@
datasize >> 10,
initsize >> 10);
- /* Initialize the vDSO */
- vsyscall_init();
+ printk(KERN_INFO "virtual kernel memory layout:\n"
+ " fixmap : 0x%08lx - 0x%08lx (%4ld kB)\n"
+#ifdef CONFIG_HIGHMEM
+ " pkmap : 0x%08lx - 0x%08lx (%4ld kB)\n"
+#endif
+ " vmalloc : 0x%08lx - 0x%08lx (%4ld MB)\n"
+ " lowmem : 0x%08lx - 0x%08lx (%4ld MB) (cached)\n"
+#ifdef CONFIG_UNCACHED_MAPPING
+ " : 0x%08lx - 0x%08lx (%4ld MB) (uncached)\n"
+#endif
+ " .init : 0x%08lx - 0x%08lx (%4ld kB)\n"
+ " .data : 0x%08lx - 0x%08lx (%4ld kB)\n"
+ " .text : 0x%08lx - 0x%08lx (%4ld kB)\n",
+ FIXADDR_START, FIXADDR_TOP,
+ (FIXADDR_TOP - FIXADDR_START) >> 10,
+
+#ifdef CONFIG_HIGHMEM
+ PKMAP_BASE, PKMAP_BASE+LAST_PKMAP*PAGE_SIZE,
+ (LAST_PKMAP*PAGE_SIZE) >> 10,
+#endif
+
+ (unsigned long)VMALLOC_START, VMALLOC_END,
+ (VMALLOC_END - VMALLOC_START) >> 20,
+
+ (unsigned long)memory_start, (unsigned long)high_memory,
+ ((unsigned long)high_memory - (unsigned long)memory_start) >> 20,
+
+#ifdef CONFIG_UNCACHED_MAPPING
+ uncached_start, uncached_end, uncached_size >> 20,
+#endif
+
+ (unsigned long)&__init_begin, (unsigned long)&__init_end,
+ ((unsigned long)&__init_end -
+ (unsigned long)&__init_begin) >> 10,
+
+ (unsigned long)&_etext, (unsigned long)&_edata,
+ ((unsigned long)&_edata - (unsigned long)&_etext) >> 10,
+
+ (unsigned long)&_text, (unsigned long)&_etext,
+ ((unsigned long)&_etext - (unsigned long)&_text) >> 10);
+
+ mem_init_done = 1;
}
void free_initmem(void)
@@ -277,35 +333,6 @@
}
#endif
-#if THREAD_SHIFT < PAGE_SHIFT
-static struct kmem_cache *thread_info_cache;
-
-struct thread_info *alloc_thread_info(struct task_struct *tsk)
-{
- struct thread_info *ti;
-
- ti = kmem_cache_alloc(thread_info_cache, GFP_KERNEL);
- if (unlikely(ti == NULL))
- return NULL;
-#ifdef CONFIG_DEBUG_STACK_USAGE
- memset(ti, 0, THREAD_SIZE);
-#endif
- return ti;
-}
-
-void free_thread_info(struct thread_info *ti)
-{
- kmem_cache_free(thread_info_cache, ti);
-}
-
-void thread_info_cache_init(void)
-{
- thread_info_cache = kmem_cache_create("thread_info", THREAD_SIZE,
- THREAD_SIZE, 0, NULL);
- BUG_ON(thread_info_cache == NULL);
-}
-#endif /* THREAD_SHIFT < PAGE_SHIFT */
-
#ifdef CONFIG_MEMORY_HOTPLUG
int arch_add_memory(int nid, u64 start, u64 size)
{
@@ -336,10 +363,3 @@
#endif
#endif /* CONFIG_MEMORY_HOTPLUG */
-
-#ifdef CONFIG_PMB
-int __in_29bit_mode(void)
-{
- return !(ctrl_inl(PMB_PASCR) & PASCR_SE);
-}
-#endif /* CONFIG_PMB */
diff --git a/arch/sh/mm/ioremap_32.c b/arch/sh/mm/ioremap.c
similarity index 78%
rename from arch/sh/mm/ioremap_32.c
rename to arch/sh/mm/ioremap.c
index 2141bef..c68d2d7 100644
--- a/arch/sh/mm/ioremap_32.c
+++ b/arch/sh/mm/ioremap.c
@@ -1,13 +1,13 @@
/*
* arch/sh/mm/ioremap.c
*
+ * (C) Copyright 1995 1996 Linus Torvalds
+ * (C) Copyright 2005 - 2010 Paul Mundt
+ *
* Re-map IO memory to kernel address space so that we can access it.
* This is needed for high PCI addresses that aren't mapped in the
* 640k-1MB IO memory area on PC's
*
- * (C) Copyright 1995 1996 Linus Torvalds
- * (C) Copyright 2005, 2006 Paul Mundt
- *
* This file is subject to the terms and conditions of the GNU General
* Public License. See the file "COPYING" in the main directory of this
* archive for more details.
@@ -33,12 +33,12 @@
* have to convert them into an offset in a page-aligned mapping, but the
* caller shouldn't need to know that small detail.
*/
-void __iomem *__ioremap_caller(unsigned long phys_addr, unsigned long size,
- unsigned long flags, void *caller)
+void __iomem * __init_refok
+__ioremap_caller(unsigned long phys_addr, unsigned long size,
+ pgprot_t pgprot, void *caller)
{
struct vm_struct *area;
unsigned long offset, last_addr, addr, orig_addr;
- pgprot_t pgprot;
/* Don't allow wraparound or zero size */
last_addr = phys_addr + size - 1;
@@ -46,18 +46,6 @@
return NULL;
/*
- * If we're in the fixed PCI memory range, mapping through page
- * tables is not only pointless, but also fundamentally broken.
- * Just return the physical address instead.
- *
- * For boards that map a small PCI memory aperture somewhere in
- * P1/P2 space, ioremap() will already do the right thing,
- * and we'll never get this far.
- */
- if (is_pci_memory_fixed_range(phys_addr, size))
- return (void __iomem *)phys_addr;
-
- /*
* Mappings have to be page-aligned
*/
offset = phys_addr & ~PAGE_MASK;
@@ -65,6 +53,12 @@
size = PAGE_ALIGN(last_addr+1) - phys_addr;
/*
+ * If we can't yet use the regular approach, go the fixmap route.
+ */
+ if (!mem_init_done)
+ return ioremap_fixed(phys_addr, offset, size, pgprot);
+
+ /*
* Ok, go for it..
*/
area = get_vm_area_caller(size, VM_IOREMAP, caller);
@@ -84,8 +78,9 @@
* PMB entries are all pre-faulted.
*/
if (unlikely(phys_addr >= P1SEG)) {
- unsigned long mapped = pmb_remap(addr, phys_addr, size, flags);
+ unsigned long mapped;
+ mapped = pmb_remap(addr, phys_addr, size, pgprot);
if (likely(mapped)) {
addr += mapped;
phys_addr += mapped;
@@ -94,7 +89,6 @@
}
#endif
- pgprot = __pgprot(pgprot_val(PAGE_KERNEL_NOCACHE) | flags);
if (likely(size))
if (ioremap_page_range(addr, addr + size, phys_addr, pgprot)) {
vunmap((void *)orig_addr);
@@ -105,15 +99,38 @@
}
EXPORT_SYMBOL(__ioremap_caller);
+/*
+ * Simple checks for non-translatable mappings.
+ */
+static inline int iomapping_nontranslatable(unsigned long offset)
+{
+#ifdef CONFIG_29BIT
+ /*
+ * In 29-bit mode this includes the fixed P1/P2 areas, as well as
+ * parts of P3.
+ */
+ if (PXSEG(offset) < P3SEG || offset >= P3_ADDR_MAX)
+ return 1;
+#endif
+
+ return 0;
+}
+
void __iounmap(void __iomem *addr)
{
unsigned long vaddr = (unsigned long __force)addr;
- unsigned long seg = PXSEG(vaddr);
struct vm_struct *p;
- if (seg < P3SEG || vaddr >= P3_ADDR_MAX)
+ /*
+ * Nothing to do if there is no translatable mapping.
+ */
+ if (iomapping_nontranslatable(vaddr))
return;
- if (is_pci_memory_fixed_range(vaddr, 0))
+
+ /*
+ * There's no VMA if it's from an early fixed mapping.
+ */
+ if (iounmap_fixed(addr) == 0)
return;
#ifdef CONFIG_PMB
diff --git a/arch/sh/mm/ioremap_64.c b/arch/sh/mm/ioremap_64.c
deleted file mode 100644
index ef43465..0000000
--- a/arch/sh/mm/ioremap_64.c
+++ /dev/null
@@ -1,326 +0,0 @@
-/*
- * arch/sh/mm/ioremap_64.c
- *
- * Copyright (C) 2000, 2001 Paolo Alberelli
- * Copyright (C) 2003 - 2007 Paul Mundt
- *
- * Mostly derived from arch/sh/mm/ioremap.c which, in turn is mostly
- * derived from arch/i386/mm/ioremap.c .
- *
- * (C) Copyright 1995 1996 Linus Torvalds
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/vmalloc.h>
-#include <linux/ioport.h>
-#include <linux/module.h>
-#include <linux/mm.h>
-#include <linux/io.h>
-#include <linux/bootmem.h>
-#include <linux/proc_fs.h>
-#include <linux/slab.h>
-#include <asm/page.h>
-#include <asm/pgalloc.h>
-#include <asm/addrspace.h>
-#include <asm/cacheflush.h>
-#include <asm/tlbflush.h>
-#include <asm/mmu.h>
-
-static struct resource shmedia_iomap = {
- .name = "shmedia_iomap",
- .start = IOBASE_VADDR + PAGE_SIZE,
- .end = IOBASE_END - 1,
-};
-
-static void shmedia_mapioaddr(unsigned long pa, unsigned long va,
- unsigned long flags);
-static void shmedia_unmapioaddr(unsigned long vaddr);
-static void __iomem *shmedia_ioremap(struct resource *res, u32 pa,
- int sz, unsigned long flags);
-
-/*
- * We have the same problem as the SPARC, so lets have the same comment:
- * Our mini-allocator...
- * Boy this is gross! We need it because we must map I/O for
- * timers and interrupt controller before the kmalloc is available.
- */
-
-#define XNMLN 15
-#define XNRES 10
-
-struct xresource {
- struct resource xres; /* Must be first */
- int xflag; /* 1 == used */
- char xname[XNMLN+1];
-};
-
-static struct xresource xresv[XNRES];
-
-static struct xresource *xres_alloc(void)
-{
- struct xresource *xrp;
- int n;
-
- xrp = xresv;
- for (n = 0; n < XNRES; n++) {
- if (xrp->xflag == 0) {
- xrp->xflag = 1;
- return xrp;
- }
- xrp++;
- }
- return NULL;
-}
-
-static void xres_free(struct xresource *xrp)
-{
- xrp->xflag = 0;
-}
-
-static struct resource *shmedia_find_resource(struct resource *root,
- unsigned long vaddr)
-{
- struct resource *res;
-
- for (res = root->child; res; res = res->sibling)
- if (res->start <= vaddr && res->end >= vaddr)
- return res;
-
- return NULL;
-}
-
-static void __iomem *shmedia_alloc_io(unsigned long phys, unsigned long size,
- const char *name, unsigned long flags)
-{
- struct xresource *xres;
- struct resource *res;
- char *tack;
- int tlen;
-
- if (name == NULL)
- name = "???";
-
- xres = xres_alloc();
- if (xres != 0) {
- tack = xres->xname;
- res = &xres->xres;
- } else {
- printk_once(KERN_NOTICE "%s: done with statics, "
- "switching to kmalloc\n", __func__);
- tlen = strlen(name);
- tack = kmalloc(sizeof(struct resource) + tlen + 1, GFP_KERNEL);
- if (!tack)
- return NULL;
- memset(tack, 0, sizeof(struct resource));
- res = (struct resource *) tack;
- tack += sizeof(struct resource);
- }
-
- strncpy(tack, name, XNMLN);
- tack[XNMLN] = 0;
- res->name = tack;
-
- return shmedia_ioremap(res, phys, size, flags);
-}
-
-static void __iomem *shmedia_ioremap(struct resource *res, u32 pa, int sz,
- unsigned long flags)
-{
- unsigned long offset = ((unsigned long) pa) & (~PAGE_MASK);
- unsigned long round_sz = (offset + sz + PAGE_SIZE-1) & PAGE_MASK;
- unsigned long va;
- unsigned int psz;
-
- if (allocate_resource(&shmedia_iomap, res, round_sz,
- shmedia_iomap.start, shmedia_iomap.end,
- PAGE_SIZE, NULL, NULL) != 0) {
- panic("alloc_io_res(%s): cannot occupy\n",
- (res->name != NULL) ? res->name : "???");
- }
-
- va = res->start;
- pa &= PAGE_MASK;
-
- psz = (res->end - res->start + (PAGE_SIZE - 1)) / PAGE_SIZE;
-
- for (psz = res->end - res->start + 1; psz != 0; psz -= PAGE_SIZE) {
- shmedia_mapioaddr(pa, va, flags);
- va += PAGE_SIZE;
- pa += PAGE_SIZE;
- }
-
- return (void __iomem *)(unsigned long)(res->start + offset);
-}
-
-static void shmedia_free_io(struct resource *res)
-{
- unsigned long len = res->end - res->start + 1;
-
- BUG_ON((len & (PAGE_SIZE - 1)) != 0);
-
- while (len) {
- len -= PAGE_SIZE;
- shmedia_unmapioaddr(res->start + len);
- }
-
- release_resource(res);
-}
-
-static __init_refok void *sh64_get_page(void)
-{
- void *page;
-
- if (slab_is_available())
- page = (void *)get_zeroed_page(GFP_KERNEL);
- else
- page = alloc_bootmem_pages(PAGE_SIZE);
-
- if (!page || ((unsigned long)page & ~PAGE_MASK))
- panic("sh64_get_page: Out of memory already?\n");
-
- return page;
-}
-
-static void shmedia_mapioaddr(unsigned long pa, unsigned long va,
- unsigned long flags)
-{
- pgd_t *pgdp;
- pud_t *pudp;
- pmd_t *pmdp;
- pte_t *ptep, pte;
- pgprot_t prot;
-
- pr_debug("shmedia_mapiopage pa %08lx va %08lx\n", pa, va);
-
- if (!flags)
- flags = 1; /* 1 = CB0-1 device */
-
- pgdp = pgd_offset_k(va);
- if (pgd_none(*pgdp) || !pgd_present(*pgdp)) {
- pudp = (pud_t *)sh64_get_page();
- set_pgd(pgdp, __pgd((unsigned long)pudp | _KERNPG_TABLE));
- }
-
- pudp = pud_offset(pgdp, va);
- if (pud_none(*pudp) || !pud_present(*pudp)) {
- pmdp = (pmd_t *)sh64_get_page();
- set_pud(pudp, __pud((unsigned long)pmdp | _KERNPG_TABLE));
- }
-
- pmdp = pmd_offset(pudp, va);
- if (pmd_none(*pmdp) || !pmd_present(*pmdp)) {
- ptep = (pte_t *)sh64_get_page();
- set_pmd(pmdp, __pmd((unsigned long)ptep + _PAGE_TABLE));
- }
-
- prot = __pgprot(_PAGE_PRESENT | _PAGE_READ | _PAGE_WRITE |
- _PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_SHARED | flags);
-
- pte = pfn_pte(pa >> PAGE_SHIFT, prot);
- ptep = pte_offset_kernel(pmdp, va);
-
- if (!pte_none(*ptep) &&
- pte_val(*ptep) != pte_val(pte))
- pte_ERROR(*ptep);
-
- set_pte(ptep, pte);
-
- flush_tlb_kernel_range(va, PAGE_SIZE);
-}
-
-static void shmedia_unmapioaddr(unsigned long vaddr)
-{
- pgd_t *pgdp;
- pud_t *pudp;
- pmd_t *pmdp;
- pte_t *ptep;
-
- pgdp = pgd_offset_k(vaddr);
- if (pgd_none(*pgdp) || pgd_bad(*pgdp))
- return;
-
- pudp = pud_offset(pgdp, vaddr);
- if (pud_none(*pudp) || pud_bad(*pudp))
- return;
-
- pmdp = pmd_offset(pudp, vaddr);
- if (pmd_none(*pmdp) || pmd_bad(*pmdp))
- return;
-
- ptep = pte_offset_kernel(pmdp, vaddr);
-
- if (pte_none(*ptep) || !pte_present(*ptep))
- return;
-
- clear_page((void *)ptep);
- pte_clear(&init_mm, vaddr, ptep);
-}
-
-void __iomem *__ioremap_caller(unsigned long offset, unsigned long size,
- unsigned long flags, void *caller)
-{
- char name[14];
-
- sprintf(name, "phys_%08x", (u32)offset);
- return shmedia_alloc_io(offset, size, name, flags);
-}
-EXPORT_SYMBOL(__ioremap_caller);
-
-void __iounmap(void __iomem *virtual)
-{
- unsigned long vaddr = (unsigned long)virtual & PAGE_MASK;
- struct resource *res;
- unsigned int psz;
-
- res = shmedia_find_resource(&shmedia_iomap, vaddr);
- if (!res) {
- printk(KERN_ERR "%s: Failed to free 0x%08lx\n",
- __func__, vaddr);
- return;
- }
-
- psz = (res->end - res->start + (PAGE_SIZE - 1)) / PAGE_SIZE;
-
- shmedia_free_io(res);
-
- if ((char *)res >= (char *)xresv &&
- (char *)res < (char *)&xresv[XNRES]) {
- xres_free((struct xresource *)res);
- } else {
- kfree(res);
- }
-}
-EXPORT_SYMBOL(__iounmap);
-
-static int
-ioremap_proc_info(char *buf, char **start, off_t fpos, int length, int *eof,
- void *data)
-{
- char *p = buf, *e = buf + length;
- struct resource *r;
- const char *nm;
-
- for (r = ((struct resource *)data)->child; r != NULL; r = r->sibling) {
- if (p + 32 >= e) /* Better than nothing */
- break;
- nm = r->name;
- if (nm == NULL)
- nm = "???";
-
- p += sprintf(p, "%08lx-%08lx: %s\n",
- (unsigned long)r->start,
- (unsigned long)r->end, nm);
- }
-
- return p-buf;
-}
-
-static int __init register_proc_onchip(void)
-{
- create_proc_read_entry("io_map", 0, 0, ioremap_proc_info,
- &shmedia_iomap);
- return 0;
-}
-late_initcall(register_proc_onchip);
diff --git a/arch/sh/mm/ioremap_fixed.c b/arch/sh/mm/ioremap_fixed.c
new file mode 100644
index 0000000..0b78b1e
--- /dev/null
+++ b/arch/sh/mm/ioremap_fixed.c
@@ -0,0 +1,128 @@
+/*
+ * Re-map IO memory to kernel address space so that we can access it.
+ *
+ * These functions should only be used when it is necessary to map a
+ * physical address space into the kernel address space before ioremap()
+ * can be used, e.g. early in boot before paging_init().
+ *
+ * Copyright (C) 2009 Matt Fleming
+ */
+
+#include <linux/vmalloc.h>
+#include <linux/ioport.h>
+#include <linux/module.h>
+#include <linux/mm.h>
+#include <linux/io.h>
+#include <linux/bootmem.h>
+#include <linux/proc_fs.h>
+#include <linux/slab.h>
+#include <asm/fixmap.h>
+#include <asm/page.h>
+#include <asm/pgalloc.h>
+#include <asm/addrspace.h>
+#include <asm/cacheflush.h>
+#include <asm/tlbflush.h>
+#include <asm/mmu.h>
+#include <asm/mmu_context.h>
+
+struct ioremap_map {
+ void __iomem *addr;
+ unsigned long size;
+ unsigned long fixmap_addr;
+};
+
+static struct ioremap_map ioremap_maps[FIX_N_IOREMAPS];
+
+void __init ioremap_fixed_init(void)
+{
+ struct ioremap_map *map;
+ int i;
+
+ for (i = 0; i < FIX_N_IOREMAPS; i++) {
+ map = &ioremap_maps[i];
+ map->fixmap_addr = __fix_to_virt(FIX_IOREMAP_BEGIN + i);
+ }
+}
+
+void __init __iomem *
+ioremap_fixed(resource_size_t phys_addr, unsigned long offset,
+ unsigned long size, pgprot_t prot)
+{
+ enum fixed_addresses idx0, idx;
+ struct ioremap_map *map;
+ unsigned int nrpages;
+ int i, slot;
+
+ slot = -1;
+ for (i = 0; i < FIX_N_IOREMAPS; i++) {
+ map = &ioremap_maps[i];
+ if (!map->addr) {
+ map->size = size;
+ slot = i;
+ break;
+ }
+ }
+
+ if (slot < 0)
+ return NULL;
+
+ /*
+ * Mappings have to fit in the FIX_IOREMAP area.
+ */
+ nrpages = size >> PAGE_SHIFT;
+ if (nrpages > FIX_N_IOREMAPS)
+ return NULL;
+
+ /*
+ * Ok, go for it..
+ */
+ idx0 = FIX_IOREMAP_BEGIN + slot;
+ idx = idx0;
+ while (nrpages > 0) {
+ pgprot_val(prot) |= _PAGE_WIRED;
+ __set_fixmap(idx, phys_addr, prot);
+ phys_addr += PAGE_SIZE;
+ idx++;
+ --nrpages;
+ }
+
+ map->addr = (void __iomem *)(offset + map->fixmap_addr);
+ return map->addr;
+}
+
+int iounmap_fixed(void __iomem *addr)
+{
+ enum fixed_addresses idx;
+ struct ioremap_map *map;
+ unsigned int nrpages;
+ int i, slot;
+
+ slot = -1;
+ for (i = 0; i < FIX_N_IOREMAPS; i++) {
+ map = &ioremap_maps[i];
+ if (map->addr == addr) {
+ slot = i;
+ break;
+ }
+ }
+
+ /*
+ * If we don't match, it's not for us.
+ */
+ if (slot < 0)
+ return -EINVAL;
+
+ nrpages = map->size >> PAGE_SHIFT;
+
+ idx = FIX_IOREMAP_BEGIN + slot + nrpages - 1;
+ while (nrpages > 0) {
+ __clear_fixmap(idx, __pgprot(_PAGE_WIRED));
+ --idx;
+ --nrpages;
+ }
+
+ map->size = 0;
+ map->addr = NULL;
+
+ return 0;
+}
diff --git a/arch/sh/mm/nommu.c b/arch/sh/mm/nommu.c
index ac16c05..7694f50 100644
--- a/arch/sh/mm/nommu.c
+++ b/arch/sh/mm/nommu.c
@@ -94,3 +94,7 @@
void __set_fixmap(enum fixed_addresses idx, unsigned long phys, pgprot_t prot)
{
}
+
+void pgtable_cache_init(void)
+{
+}
diff --git a/arch/sh/mm/pgtable.c b/arch/sh/mm/pgtable.c
new file mode 100644
index 0000000..6f21fb1
--- /dev/null
+++ b/arch/sh/mm/pgtable.c
@@ -0,0 +1,56 @@
+#include <linux/mm.h>
+
+#define PGALLOC_GFP GFP_KERNEL | __GFP_REPEAT | __GFP_ZERO
+
+static struct kmem_cache *pgd_cachep;
+#if PAGETABLE_LEVELS > 2
+static struct kmem_cache *pmd_cachep;
+#endif
+
+void pgd_ctor(void *x)
+{
+ pgd_t *pgd = x;
+
+ memcpy(pgd + USER_PTRS_PER_PGD,
+ swapper_pg_dir + USER_PTRS_PER_PGD,
+ (PTRS_PER_PGD - USER_PTRS_PER_PGD) * sizeof(pgd_t));
+}
+
+void pgtable_cache_init(void)
+{
+ pgd_cachep = kmem_cache_create("pgd_cache",
+ PTRS_PER_PGD * (1<<PTE_MAGNITUDE),
+ PAGE_SIZE, SLAB_PANIC, pgd_ctor);
+#if PAGETABLE_LEVELS > 2
+ pmd_cachep = kmem_cache_create("pmd_cache",
+ PTRS_PER_PMD * (1<<PTE_MAGNITUDE),
+ PAGE_SIZE, SLAB_PANIC, NULL);
+#endif
+}
+
+pgd_t *pgd_alloc(struct mm_struct *mm)
+{
+ return kmem_cache_alloc(pgd_cachep, PGALLOC_GFP);
+}
+
+void pgd_free(struct mm_struct *mm, pgd_t *pgd)
+{
+ kmem_cache_free(pgd_cachep, pgd);
+}
+
+#if PAGETABLE_LEVELS > 2
+void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd)
+{
+ set_pud(pud, __pud((unsigned long)pmd));
+}
+
+pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long address)
+{
+ return kmem_cache_alloc(pmd_cachep, PGALLOC_GFP);
+}
+
+void pmd_free(struct mm_struct *mm, pmd_t *pmd)
+{
+ kmem_cache_free(pmd_cachep, pmd);
+}
+#endif /* PAGETABLE_LEVELS > 2 */
diff --git a/arch/sh/mm/pmb.c b/arch/sh/mm/pmb.c
index 280f6a1..198bcff 100644
--- a/arch/sh/mm/pmb.c
+++ b/arch/sh/mm/pmb.c
@@ -3,11 +3,8 @@
*
* Privileged Space Mapping Buffer (PMB) Support.
*
- * Copyright (C) 2005, 2006, 2007 Paul Mundt
- *
- * P1/P2 Section mapping definitions from map32.h, which was:
- *
- * Copyright 2003 (c) Lineo Solutions,Inc.
+ * Copyright (C) 2005 - 2010 Paul Mundt
+ * Copyright (C) 2010 Matt Fleming
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
@@ -24,47 +21,67 @@
#include <linux/fs.h>
#include <linux/seq_file.h>
#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/spinlock.h>
+#include <linux/rwlock.h>
+#include <asm/sizes.h>
#include <asm/system.h>
#include <asm/uaccess.h>
#include <asm/pgtable.h>
+#include <asm/page.h>
#include <asm/mmu.h>
-#include <asm/io.h>
#include <asm/mmu_context.h>
-#define NR_PMB_ENTRIES 16
+struct pmb_entry;
-static void __pmb_unmap(struct pmb_entry *);
+struct pmb_entry {
+ unsigned long vpn;
+ unsigned long ppn;
+ unsigned long flags;
+ unsigned long size;
+ spinlock_t lock;
+
+ /*
+ * 0 .. NR_PMB_ENTRIES for specific entry selection, or
+ * PMB_NO_ENTRY to search for a free one
+ */
+ int entry;
+
+ /* Adjacent entry link for contiguous multi-entry mappings */
+ struct pmb_entry *link;
+};
+
+static void pmb_unmap_entry(struct pmb_entry *, int depth);
+
+static DEFINE_RWLOCK(pmb_rwlock);
static struct pmb_entry pmb_entry_list[NR_PMB_ENTRIES];
-static unsigned long pmb_map;
+static DECLARE_BITMAP(pmb_map, NR_PMB_ENTRIES);
-static inline unsigned long mk_pmb_entry(unsigned int entry)
+static __always_inline unsigned long mk_pmb_entry(unsigned int entry)
{
return (entry & PMB_E_MASK) << PMB_E_SHIFT;
}
-static inline unsigned long mk_pmb_addr(unsigned int entry)
+static __always_inline unsigned long mk_pmb_addr(unsigned int entry)
{
return mk_pmb_entry(entry) | PMB_ADDR;
}
-static inline unsigned long mk_pmb_data(unsigned int entry)
+static __always_inline unsigned long mk_pmb_data(unsigned int entry)
{
return mk_pmb_entry(entry) | PMB_DATA;
}
static int pmb_alloc_entry(void)
{
- unsigned int pos;
+ int pos;
-repeat:
- pos = find_first_zero_bit(&pmb_map, NR_PMB_ENTRIES);
-
- if (unlikely(pos > NR_PMB_ENTRIES))
- return -ENOSPC;
-
- if (test_and_set_bit(pos, &pmb_map))
- goto repeat;
+ pos = find_first_zero_bit(pmb_map, NR_PMB_ENTRIES);
+ if (pos >= 0 && pos < NR_PMB_ENTRIES)
+ __set_bit(pos, pmb_map);
+ else
+ pos = -ENOSPC;
return pos;
}
@@ -73,21 +90,34 @@
unsigned long flags, int entry)
{
struct pmb_entry *pmbe;
+ unsigned long irqflags;
+ void *ret = NULL;
int pos;
+ write_lock_irqsave(&pmb_rwlock, irqflags);
+
if (entry == PMB_NO_ENTRY) {
pos = pmb_alloc_entry();
- if (pos < 0)
- return ERR_PTR(pos);
+ if (unlikely(pos < 0)) {
+ ret = ERR_PTR(pos);
+ goto out;
+ }
} else {
- if (test_bit(entry, &pmb_map))
- return ERR_PTR(-ENOSPC);
+ if (__test_and_set_bit(entry, pmb_map)) {
+ ret = ERR_PTR(-ENOSPC);
+ goto out;
+ }
+
pos = entry;
}
+ write_unlock_irqrestore(&pmb_rwlock, irqflags);
+
pmbe = &pmb_entry_list[pos];
- if (!pmbe)
- return ERR_PTR(-ENOMEM);
+
+ memset(pmbe, 0, sizeof(struct pmb_entry));
+
+ spin_lock_init(&pmbe->lock);
pmbe->vpn = vpn;
pmbe->ppn = ppn;
@@ -95,101 +125,113 @@
pmbe->entry = pos;
return pmbe;
+
+out:
+ write_unlock_irqrestore(&pmb_rwlock, irqflags);
+ return ret;
}
static void pmb_free(struct pmb_entry *pmbe)
{
- int pos = pmbe->entry;
+ __clear_bit(pmbe->entry, pmb_map);
- pmbe->vpn = 0;
- pmbe->ppn = 0;
- pmbe->flags = 0;
- pmbe->entry = 0;
-
- clear_bit(pos, &pmb_map);
+ pmbe->entry = PMB_NO_ENTRY;
+ pmbe->link = NULL;
}
/*
- * Must be in P2 for __set_pmb_entry()
+ * Ensure that the PMB entries match our cache configuration.
+ *
+ * When we are in 32-bit address extended mode, CCR.CB becomes
+ * invalid, so care must be taken to manually adjust cacheable
+ * translations.
*/
-static void __set_pmb_entry(unsigned long vpn, unsigned long ppn,
- unsigned long flags, int pos)
+static __always_inline unsigned long pmb_cache_flags(void)
{
- ctrl_outl(vpn | PMB_V, mk_pmb_addr(pos));
+ unsigned long flags = 0;
-#ifdef CONFIG_CACHE_WRITETHROUGH
- /*
- * When we are in 32-bit address extended mode, CCR.CB becomes
- * invalid, so care must be taken to manually adjust cacheable
- * translations.
- */
- if (likely(flags & PMB_C))
- flags |= PMB_WT;
+#if defined(CONFIG_CACHE_WRITETHROUGH)
+ flags |= PMB_C | PMB_WT | PMB_UB;
+#elif defined(CONFIG_CACHE_WRITEBACK)
+ flags |= PMB_C;
#endif
- ctrl_outl(ppn | flags | PMB_V, mk_pmb_data(pos));
+ return flags;
}
-static void __uses_jump_to_uncached set_pmb_entry(struct pmb_entry *pmbe)
+/*
+ * Must be run uncached.
+ */
+static void __set_pmb_entry(struct pmb_entry *pmbe)
{
- jump_to_uncached();
- __set_pmb_entry(pmbe->vpn, pmbe->ppn, pmbe->flags, pmbe->entry);
- back_to_cached();
+ writel_uncached(pmbe->vpn | PMB_V, mk_pmb_addr(pmbe->entry));
+ writel_uncached(pmbe->ppn | pmbe->flags | PMB_V,
+ mk_pmb_data(pmbe->entry));
}
-static void __uses_jump_to_uncached clear_pmb_entry(struct pmb_entry *pmbe)
+static void __clear_pmb_entry(struct pmb_entry *pmbe)
{
- unsigned int entry = pmbe->entry;
- unsigned long addr;
+ unsigned long addr, data;
+ unsigned long addr_val, data_val;
- if (unlikely(entry >= NR_PMB_ENTRIES))
- return;
+ addr = mk_pmb_addr(pmbe->entry);
+ data = mk_pmb_data(pmbe->entry);
- jump_to_uncached();
+ addr_val = __raw_readl(addr);
+ data_val = __raw_readl(data);
/* Clear V-bit */
- addr = mk_pmb_addr(entry);
- ctrl_outl(ctrl_inl(addr) & ~PMB_V, addr);
-
- addr = mk_pmb_data(entry);
- ctrl_outl(ctrl_inl(addr) & ~PMB_V, addr);
-
- back_to_cached();
+ writel_uncached(addr_val & ~PMB_V, addr);
+ writel_uncached(data_val & ~PMB_V, data);
}
+static void set_pmb_entry(struct pmb_entry *pmbe)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&pmbe->lock, flags);
+ __set_pmb_entry(pmbe);
+ spin_unlock_irqrestore(&pmbe->lock, flags);
+}
static struct {
unsigned long size;
int flag;
} pmb_sizes[] = {
- { .size = 0x20000000, .flag = PMB_SZ_512M, },
- { .size = 0x08000000, .flag = PMB_SZ_128M, },
- { .size = 0x04000000, .flag = PMB_SZ_64M, },
- { .size = 0x01000000, .flag = PMB_SZ_16M, },
+ { .size = SZ_512M, .flag = PMB_SZ_512M, },
+ { .size = SZ_128M, .flag = PMB_SZ_128M, },
+ { .size = SZ_64M, .flag = PMB_SZ_64M, },
+ { .size = SZ_16M, .flag = PMB_SZ_16M, },
};
long pmb_remap(unsigned long vaddr, unsigned long phys,
- unsigned long size, unsigned long flags)
+ unsigned long size, pgprot_t prot)
{
struct pmb_entry *pmbp, *pmbe;
unsigned long wanted;
int pmb_flags, i;
long err;
+ u64 flags;
+
+ flags = pgprot_val(prot);
+
+ pmb_flags = PMB_WT | PMB_UB;
/* Convert typical pgprot value to the PMB equivalent */
if (flags & _PAGE_CACHABLE) {
- if (flags & _PAGE_WT)
- pmb_flags = PMB_WT;
- else
- pmb_flags = PMB_C;
- } else
- pmb_flags = PMB_WT | PMB_UB;
+ pmb_flags |= PMB_C;
+
+ if ((flags & _PAGE_WT) == 0)
+ pmb_flags &= ~(PMB_WT | PMB_UB);
+ }
pmbp = NULL;
wanted = size;
again:
for (i = 0; i < ARRAY_SIZE(pmb_sizes); i++) {
+ unsigned long flags;
+
if (size < pmb_sizes[i].size)
continue;
@@ -200,18 +242,25 @@
goto out;
}
- set_pmb_entry(pmbe);
+ spin_lock_irqsave(&pmbe->lock, flags);
+
+ __set_pmb_entry(pmbe);
phys += pmb_sizes[i].size;
vaddr += pmb_sizes[i].size;
size -= pmb_sizes[i].size;
+ pmbe->size = pmb_sizes[i].size;
+
/*
* Link adjacent entries that span multiple PMB entries
* for easier tear-down.
*/
- if (likely(pmbp))
+ if (likely(pmbp)) {
+ spin_lock(&pmbp->lock);
pmbp->link = pmbe;
+ spin_unlock(&pmbp->lock);
+ }
pmbp = pmbe;
@@ -221,16 +270,17 @@
* pmb_sizes[i].size again.
*/
i--;
+
+ spin_unlock_irqrestore(&pmbe->lock, flags);
}
- if (size >= 0x1000000)
+ if (size >= SZ_16M)
goto again;
return wanted - size;
out:
- if (pmbp)
- __pmb_unmap(pmbp);
+ pmb_unmap_entry(pmbp, NR_PMB_ENTRIES);
return err;
}
@@ -240,24 +290,52 @@
struct pmb_entry *pmbe = NULL;
int i;
+ read_lock(&pmb_rwlock);
+
for (i = 0; i < ARRAY_SIZE(pmb_entry_list); i++) {
- if (test_bit(i, &pmb_map)) {
+ if (test_bit(i, pmb_map)) {
pmbe = &pmb_entry_list[i];
if (pmbe->vpn == addr)
break;
}
}
- if (unlikely(!pmbe))
- return;
+ read_unlock(&pmb_rwlock);
- __pmb_unmap(pmbe);
+ pmb_unmap_entry(pmbe, NR_PMB_ENTRIES);
}
-static void __pmb_unmap(struct pmb_entry *pmbe)
+static bool pmb_can_merge(struct pmb_entry *a, struct pmb_entry *b)
{
- BUG_ON(!test_bit(pmbe->entry, &pmb_map));
+ return (b->vpn == (a->vpn + a->size)) &&
+ (b->ppn == (a->ppn + a->size)) &&
+ (b->flags == a->flags);
+}
+static bool pmb_size_valid(unsigned long size)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(pmb_sizes); i++)
+ if (pmb_sizes[i].size == size)
+ return true;
+
+ return false;
+}
+
+static int pmb_size_to_flags(unsigned long size)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(pmb_sizes); i++)
+ if (pmb_sizes[i].size == size)
+ return pmb_sizes[i].flag;
+
+ return 0;
+}
+
+static void __pmb_unmap_entry(struct pmb_entry *pmbe, int depth)
+{
do {
struct pmb_entry *pmblink = pmbe;
@@ -268,102 +346,312 @@
* this entry in pmb_alloc() (even if we haven't filled
* it yet).
*
- * Therefore, calling clear_pmb_entry() is safe as no
+ * Therefore, calling __clear_pmb_entry() is safe as no
* other mapping can be using that slot.
*/
- clear_pmb_entry(pmbe);
+ __clear_pmb_entry(pmbe);
pmbe = pmblink->link;
pmb_free(pmblink);
- } while (pmbe);
+ } while (pmbe && --depth);
}
-#ifdef CONFIG_PMB
-int __uses_jump_to_uncached pmb_init(void)
+static void pmb_unmap_entry(struct pmb_entry *pmbe, int depth)
{
- unsigned int i;
- long size, ret;
+ unsigned long flags;
- jump_to_uncached();
+ if (unlikely(!pmbe))
+ return;
- /*
- * Insert PMB entries for the P1 and P2 areas so that, after
- * we've switched the MMU to 32-bit mode, the semantics of P1
- * and P2 are the same as in 29-bit mode, e.g.
- *
- * P1 - provides a cached window onto physical memory
- * P2 - provides an uncached window onto physical memory
- */
- size = __MEMORY_START + __MEMORY_SIZE;
-
- ret = pmb_remap(P1SEG, 0x00000000, size, PMB_C);
- BUG_ON(ret != size);
-
- ret = pmb_remap(P2SEG, 0x00000000, size, PMB_WT | PMB_UB);
- BUG_ON(ret != size);
-
- ctrl_outl(0, PMB_IRMCR);
-
- /* PMB.SE and UB[7] */
- ctrl_outl(PASCR_SE | (1 << 7), PMB_PASCR);
-
- /* Flush out the TLB */
- i = ctrl_inl(MMUCR);
- i |= MMUCR_TI;
- ctrl_outl(i, MMUCR);
-
- back_to_cached();
-
- return 0;
+ write_lock_irqsave(&pmb_rwlock, flags);
+ __pmb_unmap_entry(pmbe, depth);
+ write_unlock_irqrestore(&pmb_rwlock, flags);
}
-#else
-int __uses_jump_to_uncached pmb_init(void)
+
+static __always_inline unsigned int pmb_ppn_in_range(unsigned long ppn)
+{
+ return ppn >= __pa(memory_start) && ppn < __pa(memory_end);
+}
+
+static void __init pmb_notify(void)
{
int i;
- unsigned long addr, data;
- jump_to_uncached();
+ pr_info("PMB: boot mappings:\n");
- for (i = 0; i < PMB_ENTRY_MAX; i++) {
+ read_lock(&pmb_rwlock);
+
+ for (i = 0; i < ARRAY_SIZE(pmb_entry_list); i++) {
struct pmb_entry *pmbe;
- unsigned long vpn, ppn, flags;
- addr = PMB_DATA + (i << PMB_E_SHIFT);
- data = ctrl_inl(addr);
- if (!(data & PMB_V))
+ if (!test_bit(i, pmb_map))
continue;
- if (data & PMB_C) {
-#if defined(CONFIG_CACHE_WRITETHROUGH)
- data |= PMB_WT;
-#elif defined(CONFIG_CACHE_WRITEBACK)
- data &= ~PMB_WT;
-#else
- data &= ~(PMB_C | PMB_WT);
-#endif
- }
- ctrl_outl(data, addr);
+ pmbe = &pmb_entry_list[i];
- ppn = data & PMB_PFN_MASK;
-
- flags = data & (PMB_C | PMB_WT | PMB_UB);
- flags |= data & PMB_SZ_MASK;
-
- addr = PMB_ADDR + (i << PMB_E_SHIFT);
- data = ctrl_inl(addr);
-
- vpn = data & PMB_PFN_MASK;
-
- pmbe = pmb_alloc(vpn, ppn, flags, i);
- WARN_ON(IS_ERR(pmbe));
+ pr_info(" 0x%08lx -> 0x%08lx [ %4ldMB %2scached ]\n",
+ pmbe->vpn >> PAGE_SHIFT, pmbe->ppn >> PAGE_SHIFT,
+ pmbe->size >> 20, (pmbe->flags & PMB_C) ? "" : "un");
}
- back_to_cached();
-
- return 0;
+ read_unlock(&pmb_rwlock);
}
-#endif /* CONFIG_PMB */
+
+/*
+ * Sync our software copy of the PMB mappings with those in hardware. The
+ * mappings in the hardware PMB were either set up by the bootloader or
+ * very early on by the kernel.
+ */
+static void __init pmb_synchronize(void)
+{
+ struct pmb_entry *pmbp = NULL;
+ int i, j;
+
+ /*
+ * Run through the initial boot mappings, log the established
+ * ones, and blow away anything that falls outside of the valid
+ * PPN range. Specifically, we only care about existing mappings
+ * that impact the cached/uncached sections.
+ *
+ * Note that touching these can be a bit of a minefield; the boot
+ * loader can establish multi-page mappings with the same caching
+ * attributes, so we need to ensure that we aren't modifying a
+ * mapping that we're presently executing from, or may execute
+ * from in the case of straddling page boundaries.
+ *
+ * In the future we will have to tidy up after the boot loader by
+ * jumping between the cached and uncached mappings and tearing
+ * down alternating mappings while executing from the other.
+ */
+ for (i = 0; i < NR_PMB_ENTRIES; i++) {
+ unsigned long addr, data;
+ unsigned long addr_val, data_val;
+ unsigned long ppn, vpn, flags;
+ unsigned long irqflags;
+ unsigned int size;
+ struct pmb_entry *pmbe;
+
+ addr = mk_pmb_addr(i);
+ data = mk_pmb_data(i);
+
+ addr_val = __raw_readl(addr);
+ data_val = __raw_readl(data);
+
+ /*
+ * Skip over any bogus entries
+ */
+ if (!(data_val & PMB_V) || !(addr_val & PMB_V))
+ continue;
+
+ ppn = data_val & PMB_PFN_MASK;
+ vpn = addr_val & PMB_PFN_MASK;
+
+ /*
+ * Only preserve in-range mappings.
+ */
+ if (!pmb_ppn_in_range(ppn)) {
+ /*
+ * Invalidate anything out of bounds.
+ */
+ writel_uncached(addr_val & ~PMB_V, addr);
+ writel_uncached(data_val & ~PMB_V, data);
+ continue;
+ }
+
+ /*
+ * Update the caching attributes if necessary
+ */
+ if (data_val & PMB_C) {
+ data_val &= ~PMB_CACHE_MASK;
+ data_val |= pmb_cache_flags();
+
+ writel_uncached(data_val, data);
+ }
+
+ size = data_val & PMB_SZ_MASK;
+ flags = size | (data_val & PMB_CACHE_MASK);
+
+ pmbe = pmb_alloc(vpn, ppn, flags, i);
+ if (IS_ERR(pmbe)) {
+ WARN_ON_ONCE(1);
+ continue;
+ }
+
+ spin_lock_irqsave(&pmbe->lock, irqflags);
+
+ for (j = 0; j < ARRAY_SIZE(pmb_sizes); j++)
+ if (pmb_sizes[j].flag == size)
+ pmbe->size = pmb_sizes[j].size;
+
+ if (pmbp) {
+ spin_lock(&pmbp->lock);
+
+ /*
+ * Compare the previous entry against the current one to
+ * see if the entries span a contiguous mapping. If so,
+ * setup the entry links accordingly. Compound mappings
+ * are later coalesced.
+ */
+ if (pmb_can_merge(pmbp, pmbe))
+ pmbp->link = pmbe;
+
+ spin_unlock(&pmbp->lock);
+ }
+
+ pmbp = pmbe;
+
+ spin_unlock_irqrestore(&pmbe->lock, irqflags);
+ }
+}
+
+static void __init pmb_merge(struct pmb_entry *head)
+{
+ unsigned long span, newsize;
+ struct pmb_entry *tail;
+ int i = 1, depth = 0;
+
+ span = newsize = head->size;
+
+ tail = head->link;
+ while (tail) {
+ span += tail->size;
+
+ if (pmb_size_valid(span)) {
+ newsize = span;
+ depth = i;
+ }
+
+ /* This is the end of the line.. */
+ if (!tail->link)
+ break;
+
+ tail = tail->link;
+ i++;
+ }
+
+ /*
+ * The merged page size must be valid.
+ */
+ if (!pmb_size_valid(newsize))
+ return;
+
+ head->flags &= ~PMB_SZ_MASK;
+ head->flags |= pmb_size_to_flags(newsize);
+
+ head->size = newsize;
+
+ __pmb_unmap_entry(head->link, depth);
+ __set_pmb_entry(head);
+}
+
+static void __init pmb_coalesce(void)
+{
+ unsigned long flags;
+ int i;
+
+ write_lock_irqsave(&pmb_rwlock, flags);
+
+ for (i = 0; i < ARRAY_SIZE(pmb_entry_list); i++) {
+ struct pmb_entry *pmbe;
+
+ if (!test_bit(i, pmb_map))
+ continue;
+
+ pmbe = &pmb_entry_list[i];
+
+ /*
+ * We're only interested in compound mappings
+ */
+ if (!pmbe->link)
+ continue;
+
+ /*
+ * Nothing to do if it already uses the largest possible
+ * page size.
+ */
+ if (pmbe->size == SZ_512M)
+ continue;
+
+ pmb_merge(pmbe);
+ }
+
+ write_unlock_irqrestore(&pmb_rwlock, flags);
+}
+
+#ifdef CONFIG_UNCACHED_MAPPING
+static void __init pmb_resize(void)
+{
+ int i;
+
+ /*
+ * If the uncached mapping was constructed by the kernel, it will
+ * already be a reasonable size.
+ */
+ if (uncached_size == SZ_16M)
+ return;
+
+ read_lock(&pmb_rwlock);
+
+ for (i = 0; i < ARRAY_SIZE(pmb_entry_list); i++) {
+ struct pmb_entry *pmbe;
+ unsigned long flags;
+
+ if (!test_bit(i, pmb_map))
+ continue;
+
+ pmbe = &pmb_entry_list[i];
+
+ if (pmbe->vpn != uncached_start)
+ continue;
+
+ /*
+ * Found it, now resize it.
+ */
+ spin_lock_irqsave(&pmbe->lock, flags);
+
+ pmbe->size = SZ_16M;
+ pmbe->flags &= ~PMB_SZ_MASK;
+ pmbe->flags |= pmb_size_to_flags(pmbe->size);
+
+ uncached_resize(pmbe->size);
+
+ __set_pmb_entry(pmbe);
+
+ spin_unlock_irqrestore(&pmbe->lock, flags);
+ }
+
+ read_lock(&pmb_rwlock);
+}
+#endif
+
+void __init pmb_init(void)
+{
+ /* Synchronize software state */
+ pmb_synchronize();
+
+ /* Attempt to combine compound mappings */
+ pmb_coalesce();
+
+#ifdef CONFIG_UNCACHED_MAPPING
+ /* Resize initial mappings, if necessary */
+ pmb_resize();
+#endif
+
+ /* Log them */
+ pmb_notify();
+
+ writel_uncached(0, PMB_IRMCR);
+
+ /* Flush out the TLB */
+ __raw_writel(__raw_readl(MMUCR) | MMUCR_TI, MMUCR);
+ ctrl_barrier();
+}
+
+bool __in_29bit_mode(void)
+{
+ return (__raw_readl(PMB_PASCR) & PASCR_SE) == 0;
+}
static int pmb_seq_show(struct seq_file *file, void *iter)
{
@@ -378,8 +666,8 @@
unsigned int size;
char *sz_str = NULL;
- addr = ctrl_inl(mk_pmb_addr(i));
- data = ctrl_inl(mk_pmb_data(i));
+ addr = __raw_readl(mk_pmb_addr(i));
+ data = __raw_readl(mk_pmb_data(i));
size = data & PMB_SZ_MASK;
sz_str = (size == PMB_SZ_16M) ? " 16MB":
@@ -437,14 +725,21 @@
if (state.event == PM_EVENT_ON &&
prev_state.event == PM_EVENT_FREEZE) {
struct pmb_entry *pmbe;
+
+ read_lock(&pmb_rwlock);
+
for (i = 0; i < ARRAY_SIZE(pmb_entry_list); i++) {
- if (test_bit(i, &pmb_map)) {
+ if (test_bit(i, pmb_map)) {
pmbe = &pmb_entry_list[i];
set_pmb_entry(pmbe);
}
}
+
+ read_unlock(&pmb_rwlock);
}
+
prev_state = state;
+
return 0;
}
@@ -462,6 +757,5 @@
{
return sysdev_driver_register(&cpu_sysdev_class, &pmb_sysdev_driver);
}
-
subsys_initcall(pmb_sysdev_init);
#endif
diff --git a/arch/sh/mm/tlb-pteaex.c b/arch/sh/mm/tlb-pteaex.c
index 409b7c2..32dc674 100644
--- a/arch/sh/mm/tlb-pteaex.c
+++ b/arch/sh/mm/tlb-pteaex.c
@@ -68,8 +68,7 @@
* in extended mode, the legacy 8-bit ASID field in address array 1 has
* undefined behaviour.
*/
-void __uses_jump_to_uncached local_flush_tlb_one(unsigned long asid,
- unsigned long page)
+void local_flush_tlb_one(unsigned long asid, unsigned long page)
{
jump_to_uncached();
__raw_writel(page, MMU_UTLB_ADDRESS_ARRAY | MMU_PAGE_ASSOC_BIT);
diff --git a/arch/sh/mm/tlb-sh3.c b/arch/sh/mm/tlb-sh3.c
index ace8e6d..4f5f7cb 100644
--- a/arch/sh/mm/tlb-sh3.c
+++ b/arch/sh/mm/tlb-sh3.c
@@ -41,14 +41,14 @@
/* Set PTEH register */
vpn = (address & MMU_VPN_MASK) | get_asid();
- ctrl_outl(vpn, MMU_PTEH);
+ __raw_writel(vpn, MMU_PTEH);
pteval = pte_val(pte);
/* Set PTEL register */
pteval &= _PAGE_FLAGS_HARDWARE_MASK; /* drop software flags */
/* conveniently, we want all the software flags to be 0 anyway */
- ctrl_outl(pteval, MMU_PTEL);
+ __raw_writel(pteval, MMU_PTEL);
/* Load the TLB */
asm volatile("ldtlb": /* no output */ : /* no input */ : "memory");
@@ -75,5 +75,5 @@
}
for (i = 0; i < ways; i++)
- ctrl_outl(data, addr + (i << 8));
+ __raw_writel(data, addr + (i << 8));
}
diff --git a/arch/sh/mm/tlb-sh4.c b/arch/sh/mm/tlb-sh4.c
index 8cf550e..ccac77f 100644
--- a/arch/sh/mm/tlb-sh4.c
+++ b/arch/sh/mm/tlb-sh4.c
@@ -29,7 +29,7 @@
/* Set PTEH register */
vpn = (address & MMU_VPN_MASK) | get_asid();
- ctrl_outl(vpn, MMU_PTEH);
+ __raw_writel(vpn, MMU_PTEH);
pteval = pte.pte_low;
@@ -41,13 +41,13 @@
* the protection bits (with the exception of the compat-mode SZ
* and PR bits, which are cleared) being written out in PTEL.
*/
- ctrl_outl(pte.pte_high, MMU_PTEA);
+ __raw_writel(pte.pte_high, MMU_PTEA);
#else
if (cpu_data->flags & CPU_HAS_PTEA) {
/* The last 3 bits and the first one of pteval contains
* the PTEA timing control and space attribute bits
*/
- ctrl_outl(copy_ptea_attributes(pteval), MMU_PTEA);
+ __raw_writel(copy_ptea_attributes(pteval), MMU_PTEA);
}
#endif
@@ -57,15 +57,14 @@
pteval |= _PAGE_WT;
#endif
/* conveniently, we want all the software flags to be 0 anyway */
- ctrl_outl(pteval, MMU_PTEL);
+ __raw_writel(pteval, MMU_PTEL);
/* Load the TLB */
asm volatile("ldtlb": /* no output */ : /* no input */ : "memory");
local_irq_restore(flags);
}
-void __uses_jump_to_uncached local_flush_tlb_one(unsigned long asid,
- unsigned long page)
+void local_flush_tlb_one(unsigned long asid, unsigned long page)
{
unsigned long addr, data;
@@ -78,6 +77,6 @@
addr = MMU_UTLB_ADDRESS_ARRAY | MMU_PAGE_ASSOC_BIT;
data = page | asid; /* VALID bit is off */
jump_to_uncached();
- ctrl_outl(data, addr);
+ __raw_writel(data, addr);
back_to_cached();
}
diff --git a/arch/sh/mm/tlb-sh5.c b/arch/sh/mm/tlb-sh5.c
index fdb64e4..f27dbe1 100644
--- a/arch/sh/mm/tlb-sh5.c
+++ b/arch/sh/mm/tlb-sh5.c
@@ -143,3 +143,42 @@
*/
void sh64_teardown_tlb_slot(unsigned long long config_addr)
__attribute__ ((alias("__flush_tlb_slot")));
+
+static int dtlb_entry;
+static unsigned long long dtlb_entries[64];
+
+void tlb_wire_entry(struct vm_area_struct *vma, unsigned long addr, pte_t pte)
+{
+ unsigned long long entry;
+ unsigned long paddr, flags;
+
+ BUG_ON(dtlb_entry == ARRAY_SIZE(dtlb_entries));
+
+ local_irq_save(flags);
+
+ entry = sh64_get_wired_dtlb_entry();
+ dtlb_entries[dtlb_entry++] = entry;
+
+ paddr = pte_val(pte) & _PAGE_FLAGS_HARDWARE_MASK;
+ paddr &= ~PAGE_MASK;
+
+ sh64_setup_tlb_slot(entry, addr, get_asid(), paddr);
+
+ local_irq_restore(flags);
+}
+
+void tlb_unwire_entry(void)
+{
+ unsigned long long entry;
+ unsigned long flags;
+
+ BUG_ON(!dtlb_entry);
+
+ local_irq_save(flags);
+ entry = dtlb_entries[dtlb_entry--];
+
+ sh64_teardown_tlb_slot(entry);
+ sh64_put_wired_dtlb_entry(entry);
+
+ local_irq_restore(flags);
+}
diff --git a/arch/sh/mm/tlb-urb.c b/arch/sh/mm/tlb-urb.c
new file mode 100644
index 0000000..bb5b909
--- /dev/null
+++ b/arch/sh/mm/tlb-urb.c
@@ -0,0 +1,81 @@
+/*
+ * arch/sh/mm/tlb-urb.c
+ *
+ * TLB entry wiring helpers for URB-equipped parts.
+ *
+ * Copyright (C) 2010 Matt Fleming
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/mm.h>
+#include <linux/io.h>
+#include <asm/tlb.h>
+#include <asm/mmu_context.h>
+
+/*
+ * Load the entry for 'addr' into the TLB and wire the entry.
+ */
+void tlb_wire_entry(struct vm_area_struct *vma, unsigned long addr, pte_t pte)
+{
+ unsigned long status, flags;
+ int urb;
+
+ local_irq_save(flags);
+
+ /* Load the entry into the TLB */
+ __update_tlb(vma, addr, pte);
+
+ /* ... and wire it up. */
+ status = __raw_readl(MMUCR);
+ urb = (status & MMUCR_URB) >> MMUCR_URB_SHIFT;
+ status &= ~MMUCR_URB;
+
+ /*
+ * Make sure we're not trying to wire the last TLB entry slot.
+ */
+ BUG_ON(!--urb);
+
+ urb = urb % MMUCR_URB_NENTRIES;
+
+ status |= (urb << MMUCR_URB_SHIFT);
+ __raw_writel(status, MMUCR);
+ ctrl_barrier();
+
+ local_irq_restore(flags);
+}
+
+/*
+ * Unwire the last wired TLB entry.
+ *
+ * It should also be noted that it is not possible to wire and unwire
+ * TLB entries in an arbitrary order. If you wire TLB entry N, followed
+ * by entry N+1, you must unwire entry N+1 first, then entry N. In this
+ * respect, it works like a stack or LIFO queue.
+ */
+void tlb_unwire_entry(void)
+{
+ unsigned long status, flags;
+ int urb;
+
+ local_irq_save(flags);
+
+ status = __raw_readl(MMUCR);
+ urb = (status & MMUCR_URB) >> MMUCR_URB_SHIFT;
+ status &= ~MMUCR_URB;
+
+ /*
+ * Make sure we're not trying to unwire a TLB entry when none
+ * have been wired.
+ */
+ BUG_ON(urb++ == MMUCR_URB_NENTRIES);
+
+ urb = urb % MMUCR_URB_NENTRIES;
+
+ status |= (urb << MMUCR_URB_SHIFT);
+ __raw_writel(status, MMUCR);
+ ctrl_barrier();
+
+ local_irq_restore(flags);
+}
diff --git a/arch/sh/mm/tlbflush_32.c b/arch/sh/mm/tlbflush_32.c
index 6f45c1f..004bb3f 100644
--- a/arch/sh/mm/tlbflush_32.c
+++ b/arch/sh/mm/tlbflush_32.c
@@ -132,9 +132,9 @@
* It's same position, bit #2.
*/
local_irq_save(flags);
- status = ctrl_inl(MMUCR);
+ status = __raw_readl(MMUCR);
status |= 0x04;
- ctrl_outl(status, MMUCR);
+ __raw_writel(status, MMUCR);
ctrl_barrier();
local_irq_restore(flags);
}
diff --git a/arch/sh/mm/tlbflush_64.c b/arch/sh/mm/tlbflush_64.c
index de0b0e88..706da1d 100644
--- a/arch/sh/mm/tlbflush_64.c
+++ b/arch/sh/mm/tlbflush_64.c
@@ -36,7 +36,7 @@
static inline void print_prots(pgprot_t prot)
{
- printk("prot is 0x%08lx\n",pgprot_val(prot));
+ printk("prot is 0x%016llx\n",pgprot_val(prot));
printk("%s %s %s %s %s\n",PPROT(_PAGE_SHARED),PPROT(_PAGE_READ),
PPROT(_PAGE_EXECUTE),PPROT(_PAGE_WRITE),PPROT(_PAGE_USER));
diff --git a/arch/sh/mm/uncached.c b/arch/sh/mm/uncached.c
new file mode 100644
index 0000000..cf20a5c
--- /dev/null
+++ b/arch/sh/mm/uncached.c
@@ -0,0 +1,34 @@
+#include <linux/init.h>
+#include <asm/sizes.h>
+#include <asm/page.h>
+
+/*
+ * This is the offset of the uncached section from its cached alias.
+ *
+ * Legacy platforms handle trivial transitions between cached and
+ * uncached segments by making use of the 1:1 mapping relationship in
+ * 512MB lowmem, others via a special uncached mapping.
+ *
+ * Default value only valid in 29 bit mode, in 32bit mode this will be
+ * updated by the early PMB initialization code.
+ */
+unsigned long cached_to_uncached = SZ_512M;
+unsigned long uncached_size = SZ_512M;
+unsigned long uncached_start, uncached_end;
+
+int virt_addr_uncached(unsigned long kaddr)
+{
+ return (kaddr >= uncached_start) && (kaddr < uncached_end);
+}
+
+void __init uncached_init(void)
+{
+ uncached_start = memory_end;
+ uncached_end = uncached_start + uncached_size;
+}
+
+void __init uncached_resize(unsigned long size)
+{
+ uncached_size = size;
+ uncached_end = uncached_start + uncached_size;
+}
diff --git a/arch/sh/tools/mach-types b/arch/sh/tools/mach-types
index 6639b25..b25aa55 100644
--- a/arch/sh/tools/mach-types
+++ b/arch/sh/tools/mach-types
@@ -32,6 +32,7 @@
SNAPGEAR SH_SECUREEDGE5410
EDOSK7705 SH_EDOSK7705
EDOSK7760 SH_EDOSK7760
+SDK7786 SH_SDK7786
SH4202_MICRODEV SH_SH4202_MICRODEV
SH03 SH_SH03
LANDISK SH_LANDISK
diff --git a/arch/sparc/kernel/devices.c b/arch/sparc/kernel/devices.c
index b171ae8..b062de9 100644
--- a/arch/sparc/kernel/devices.c
+++ b/arch/sparc/kernel/devices.c
@@ -59,7 +59,7 @@
cur_inst = 0;
for_each_node_by_type(dp, "cpu") {
- int err = check_cpu_node(dp->node, &cur_inst,
+ int err = check_cpu_node(dp->phandle, &cur_inst,
compare, compare_arg,
prom_node, mid);
if (!err) {
diff --git a/arch/sparc/kernel/of_device_32.c b/arch/sparc/kernel/of_device_32.c
index 53a58b3..da527b33 100644
--- a/arch/sparc/kernel/of_device_32.c
+++ b/arch/sparc/kernel/of_device_32.c
@@ -433,7 +433,7 @@
if (!parent)
dev_set_name(&op->dev, "root");
else
- dev_set_name(&op->dev, "%08x", dp->node);
+ dev_set_name(&op->dev, "%08x", dp->phandle);
if (of_device_register(op)) {
printk("%s: Could not register of device.\n",
diff --git a/arch/sparc/kernel/of_device_64.c b/arch/sparc/kernel/of_device_64.c
index 0a6f2d1..b3d4cb5 100644
--- a/arch/sparc/kernel/of_device_64.c
+++ b/arch/sparc/kernel/of_device_64.c
@@ -676,7 +676,7 @@
if (!parent)
dev_set_name(&op->dev, "root");
else
- dev_set_name(&op->dev, "%08x", dp->node);
+ dev_set_name(&op->dev, "%08x", dp->phandle);
if (of_device_register(op)) {
printk("%s: Could not register of device.\n",
diff --git a/arch/sparc/kernel/pci.c b/arch/sparc/kernel/pci.c
index 592b03d..37b66c6 100644
--- a/arch/sparc/kernel/pci.c
+++ b/arch/sparc/kernel/pci.c
@@ -722,9 +722,10 @@
{
}
-void pcibios_align_resource(void *data, struct resource *res,
- resource_size_t size, resource_size_t align)
+resource_size_t pcibios_align_resource(void *data, const struct resource *res,
+ resource_size_t size, resource_size_t align)
{
+ return res->start;
}
int pcibios_enable_device(struct pci_dev *dev, int mask)
diff --git a/arch/sparc/kernel/pcic.c b/arch/sparc/kernel/pcic.c
index 4e2724e..75e88c00 100644
--- a/arch/sparc/kernel/pcic.c
+++ b/arch/sparc/kernel/pcic.c
@@ -768,9 +768,10 @@
return str;
}
-void pcibios_align_resource(void *data, struct resource *res,
- resource_size_t size, resource_size_t align)
+resource_size_t pcibios_align_resource(void *data, const struct resource *res,
+ resource_size_t size, resource_size_t align)
{
+ return res->start;
}
int pcibios_enable_device(struct pci_dev *pdev, int mask)
diff --git a/arch/sparc/kernel/prom.h b/arch/sparc/kernel/prom.h
index 453397f..a8591ef 100644
--- a/arch/sparc/kernel/prom.h
+++ b/arch/sparc/kernel/prom.h
@@ -4,9 +4,6 @@
#include <linux/spinlock.h>
#include <asm/prom.h>
-extern struct device_node *allnodes; /* temporary while merging */
-extern rwlock_t devtree_lock; /* temporary while merging */
-
extern void * prom_early_alloc(unsigned long size);
extern void irq_trans_init(struct device_node *dp);
diff --git a/arch/sparc/kernel/prom_common.c b/arch/sparc/kernel/prom_common.c
index d80a65d..57ac9e2 100644
--- a/arch/sparc/kernel/prom_common.c
+++ b/arch/sparc/kernel/prom_common.c
@@ -37,18 +37,6 @@
char *of_console_options;
EXPORT_SYMBOL(of_console_options);
-struct device_node *of_find_node_by_phandle(phandle handle)
-{
- struct device_node *np;
-
- for (np = allnodes; np; np = np->allnext)
- if (np->node == handle)
- break;
-
- return np;
-}
-EXPORT_SYMBOL(of_find_node_by_phandle);
-
int of_getintprop_default(struct device_node *np, const char *name, int def)
{
struct property *prop;
@@ -89,7 +77,7 @@
void *old_val = prop->value;
int ret;
- ret = prom_setprop(dp->node, name, val, len);
+ ret = prom_setprop(dp->phandle, name, val, len);
err = -EINVAL;
if (ret >= 0) {
@@ -236,7 +224,7 @@
dp->name = get_one_property(node, "name");
dp->type = get_one_property(node, "device_type");
- dp->node = node;
+ dp->phandle = node;
dp->properties = build_prop_list(node);
@@ -313,7 +301,7 @@
nextp = &allnodes->allnext;
allnodes->child = prom_build_tree(allnodes,
- prom_getchild(allnodes->node),
+ prom_getchild(allnodes->phandle),
&nextp);
of_console_init();
diff --git a/arch/sparc/kernel/smp_64.c b/arch/sparc/kernel/smp_64.c
index aa36223..eb14844 100644
--- a/arch/sparc/kernel/smp_64.c
+++ b/arch/sparc/kernel/smp_64.c
@@ -370,7 +370,7 @@
} else {
struct device_node *dp = of_find_node_by_cpuid(cpu);
- prom_startcpu(dp->node, entry, cookie);
+ prom_startcpu(dp->phandle, entry, cookie);
}
for (timeout = 0; timeout < 50000; timeout++) {
diff --git a/arch/x86/include/asm/pci_x86.h b/arch/x86/include/asm/pci_x86.h
index b4bf9a9..05b58cc 100644
--- a/arch/x86/include/asm/pci_x86.h
+++ b/arch/x86/include/asm/pci_x86.h
@@ -29,6 +29,7 @@
#define PCI_CHECK_ENABLE_AMD_MMCONF 0x20000
#define PCI_HAS_IO_ECS 0x40000
#define PCI_NOASSIGN_ROMS 0x80000
+#define PCI_ROOT_NO_CRS 0x100000
extern unsigned int pci_probe;
extern unsigned long pirq_table_addr;
diff --git a/arch/x86/mm/kmemcheck/kmemcheck.c b/arch/x86/mm/kmemcheck/kmemcheck.c
index 8cc18334..b3b531a 100644
--- a/arch/x86/mm/kmemcheck/kmemcheck.c
+++ b/arch/x86/mm/kmemcheck/kmemcheck.c
@@ -337,7 +337,7 @@
if (!shadow)
return true;
- status = kmemcheck_shadow_test(shadow, size);
+ status = kmemcheck_shadow_test_all(shadow, size);
return status == KMEMCHECK_SHADOW_INITIALIZED;
}
diff --git a/arch/x86/mm/kmemcheck/shadow.c b/arch/x86/mm/kmemcheck/shadow.c
index 3f66b82..aec1242 100644
--- a/arch/x86/mm/kmemcheck/shadow.c
+++ b/arch/x86/mm/kmemcheck/shadow.c
@@ -125,12 +125,12 @@
enum kmemcheck_shadow kmemcheck_shadow_test(void *shadow, unsigned int size)
{
+#ifdef CONFIG_KMEMCHECK_PARTIAL_OK
uint8_t *x;
unsigned int i;
x = shadow;
-#ifdef CONFIG_KMEMCHECK_PARTIAL_OK
/*
* Make sure _some_ bytes are initialized. Gcc frequently generates
* code to access neighboring bytes.
@@ -139,13 +139,25 @@
if (x[i] == KMEMCHECK_SHADOW_INITIALIZED)
return x[i];
}
+
+ return x[0];
#else
+ return kmemcheck_shadow_test_all(shadow, size);
+#endif
+}
+
+enum kmemcheck_shadow kmemcheck_shadow_test_all(void *shadow, unsigned int size)
+{
+ uint8_t *x;
+ unsigned int i;
+
+ x = shadow;
+
/* All bytes must be initialized. */
for (i = 0; i < size; ++i) {
if (x[i] != KMEMCHECK_SHADOW_INITIALIZED)
return x[i];
}
-#endif
return x[0];
}
diff --git a/arch/x86/mm/kmemcheck/shadow.h b/arch/x86/mm/kmemcheck/shadow.h
index af46d9a..ff0b2f7 100644
--- a/arch/x86/mm/kmemcheck/shadow.h
+++ b/arch/x86/mm/kmemcheck/shadow.h
@@ -11,6 +11,8 @@
void *kmemcheck_shadow_lookup(unsigned long address);
enum kmemcheck_shadow kmemcheck_shadow_test(void *shadow, unsigned int size);
+enum kmemcheck_shadow kmemcheck_shadow_test_all(void *shadow,
+ unsigned int size);
void kmemcheck_shadow_set(void *shadow, unsigned int size);
#endif
diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c
index 959e548..5f11ff6 100644
--- a/arch/x86/pci/acpi.c
+++ b/arch/x86/pci/acpi.c
@@ -15,6 +15,51 @@
int busnum;
};
+static bool pci_use_crs = true;
+
+static int __init set_use_crs(const struct dmi_system_id *id)
+{
+ pci_use_crs = true;
+ return 0;
+}
+
+static const struct dmi_system_id pci_use_crs_table[] __initconst = {
+ /* http://bugzilla.kernel.org/show_bug.cgi?id=14183 */
+ {
+ .callback = set_use_crs,
+ .ident = "IBM System x3800",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "IBM"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "x3800"),
+ },
+ },
+ {}
+};
+
+void __init pci_acpi_crs_quirks(void)
+{
+ int year;
+
+ if (dmi_get_date(DMI_BIOS_DATE, &year, NULL, NULL) && year < 2008)
+ pci_use_crs = false;
+
+ dmi_check_system(pci_use_crs_table);
+
+ /*
+ * If the user specifies "pci=use_crs" or "pci=nocrs" explicitly, that
+ * takes precedence over anything we figured out above.
+ */
+ if (pci_probe & PCI_ROOT_NO_CRS)
+ pci_use_crs = false;
+ else if (pci_probe & PCI_USE__CRS)
+ pci_use_crs = true;
+
+ printk(KERN_INFO "PCI: %s host bridge windows from ACPI; "
+ "if necessary, use \"pci=%s\" and report a bug\n",
+ pci_use_crs ? "Using" : "Ignoring",
+ pci_use_crs ? "nocrs" : "use_crs");
+}
+
static acpi_status
resource_to_addr(struct acpi_resource *resource,
struct acpi_resource_address64 *addr)
@@ -45,20 +90,6 @@
return AE_OK;
}
-static int
-bus_has_transparent_bridge(struct pci_bus *bus)
-{
- struct pci_dev *dev;
-
- list_for_each_entry(dev, &bus->devices, bus_list) {
- u16 class = dev->class >> 8;
-
- if (class == PCI_CLASS_BRIDGE_PCI && dev->transparent)
- return true;
- }
- return false;
-}
-
static void
align_resource(struct acpi_device *bridge, struct resource *res)
{
@@ -92,12 +123,8 @@
acpi_status status;
unsigned long flags;
struct resource *root;
- int max_root_bus_resources = PCI_BUS_NUM_RESOURCES;
u64 start, end;
- if (bus_has_transparent_bridge(info->bus))
- max_root_bus_resources -= 3;
-
status = resource_to_addr(acpi_res, &addr);
if (!ACPI_SUCCESS(status))
return AE_OK;
@@ -115,15 +142,6 @@
start = addr.minimum + addr.translation_offset;
end = start + addr.address_length - 1;
- if (info->res_num >= max_root_bus_resources) {
- if (pci_probe & PCI_USE__CRS)
- printk(KERN_WARNING "PCI: Failed to allocate "
- "0x%lx-0x%lx from %s for %s due to _CRS "
- "returning more than %d resource descriptors\n",
- (unsigned long) start, (unsigned long) end,
- root->name, info->name, max_root_bus_resources);
- return AE_OK;
- }
res = &info->res[info->res_num];
res->name = info->name;
@@ -133,7 +151,7 @@
res->child = NULL;
align_resource(info->bridge, res);
- if (!(pci_probe & PCI_USE__CRS)) {
+ if (!pci_use_crs) {
dev_printk(KERN_DEBUG, &info->bridge->dev,
"host bridge window %pR (ignored)\n", res);
return AE_OK;
@@ -143,7 +161,7 @@
dev_err(&info->bridge->dev,
"can't allocate host bridge window %pR\n", res);
} else {
- info->bus->resource[info->res_num] = res;
+ pci_bus_add_resource(info->bus, res, 0);
info->res_num++;
if (addr.translation_offset)
dev_info(&info->bridge->dev, "host bridge window %pR "
@@ -164,10 +182,8 @@
struct pci_root_info info;
size_t size;
- if (!(pci_probe & PCI_USE__CRS))
- dev_info(&device->dev,
- "ignoring host bridge windows from ACPI; "
- "boot with \"pci=use_crs\" to use them\n");
+ if (pci_use_crs)
+ pci_bus_remove_resources(bus);
info.bridge = device;
info.bus = bus;
diff --git a/arch/x86/pci/bus_numa.c b/arch/x86/pci/bus_numa.c
index f939d60..12d54ff 100644
--- a/arch/x86/pci/bus_numa.c
+++ b/arch/x86/pci/bus_numa.c
@@ -36,13 +36,14 @@
printk(KERN_DEBUG "PCI: peer root bus %02x res updated from pci conf\n",
b->number);
+ pci_bus_remove_resources(b);
info = &pci_root_info[i];
for (j = 0; j < info->res_num; j++) {
struct resource *res;
struct resource *root;
res = &info->res[j];
- b->resource[j] = res;
+ pci_bus_add_resource(b, res, 0);
if (res->flags & IORESOURCE_IO)
root = &ioport_resource;
else
diff --git a/arch/x86/pci/bus_numa.h b/arch/x86/pci/bus_numa.h
index adbc23fe..731b64e 100644
--- a/arch/x86/pci/bus_numa.h
+++ b/arch/x86/pci/bus_numa.h
@@ -2,8 +2,7 @@
/*
* sub bus (transparent) will use entres from 3 to store extra from
- * root, so need to make sure we have enough slot there, Should we
- * increase PCI_BUS_NUM_RESOURCES?
+ * root, so need to make sure we have enough slot there.
*/
#define RES_NUM 16
struct pci_root_info {
diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c
index d2552c6..3736176 100644
--- a/arch/x86/pci/common.c
+++ b/arch/x86/pci/common.c
@@ -520,6 +520,9 @@
} else if (!strcmp(str, "use_crs")) {
pci_probe |= PCI_USE__CRS;
return NULL;
+ } else if (!strcmp(str, "nocrs")) {
+ pci_probe |= PCI_ROOT_NO_CRS;
+ return NULL;
} else if (!strcmp(str, "earlydump")) {
pci_early_dump_regs = 1;
return NULL;
diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c
index 5dc9e8c..5a8fbf8 100644
--- a/arch/x86/pci/i386.c
+++ b/arch/x86/pci/i386.c
@@ -60,22 +60,20 @@
* but we want to try to avoid allocating at 0x2900-0x2bff
* which might have be mirrored at 0x0100-0x03ff..
*/
-void
-pcibios_align_resource(void *data, struct resource *res,
+resource_size_t
+pcibios_align_resource(void *data, const struct resource *res,
resource_size_t size, resource_size_t align)
{
struct pci_dev *dev = data;
+ resource_size_t start = res->start;
if (res->flags & IORESOURCE_IO) {
- resource_size_t start = res->start;
-
if (skip_isa_ioresource_align(dev))
- return;
- if (start & 0x300) {
+ return start;
+ if (start & 0x300)
start = (start + 0x3ff) & ~0x3ff;
- res->start = start;
- }
}
+ return start;
}
EXPORT_SYMBOL(pcibios_align_resource);
diff --git a/arch/x86/pci/irq.c b/arch/x86/pci/irq.c
index 0696d50..b02f6d8 100644
--- a/arch/x86/pci/irq.c
+++ b/arch/x86/pci/irq.c
@@ -590,6 +590,8 @@
case PCI_DEVICE_ID_INTEL_ICH10_1:
case PCI_DEVICE_ID_INTEL_ICH10_2:
case PCI_DEVICE_ID_INTEL_ICH10_3:
+ case PCI_DEVICE_ID_INTEL_CPT_LPC1:
+ case PCI_DEVICE_ID_INTEL_CPT_LPC2:
r->name = "PIIX/ICH";
r->get = pirq_piix_get;
r->set = pirq_piix_set;
diff --git a/arch/x86/pci/mmconfig-shared.c b/arch/x86/pci/mmconfig-shared.c
index b19d1e54..8f3f9a5 100644
--- a/arch/x86/pci/mmconfig-shared.c
+++ b/arch/x86/pci/mmconfig-shared.c
@@ -303,22 +303,17 @@
{
struct pci_mmcfg_region *cfg, *cfgx;
- /* last one*/
- cfg = list_entry(pci_mmcfg_list.prev, typeof(*cfg), list);
- if (cfg)
- if (cfg->end_bus < cfg->start_bus)
- cfg->end_bus = 255;
-
- if (list_is_singular(&pci_mmcfg_list))
- return;
-
- /* don't overlap please */
+ /* Fixup overlaps */
list_for_each_entry(cfg, &pci_mmcfg_list, list) {
if (cfg->end_bus < cfg->start_bus)
cfg->end_bus = 255;
+ /* Don't access the list head ! */
+ if (cfg->list.next == &pci_mmcfg_list)
+ break;
+
cfgx = list_entry(cfg->list.next, typeof(*cfg), list);
- if (cfg != cfgx && cfg->end_bus >= cfgx->start_bus)
+ if (cfg->end_bus >= cfgx->start_bus)
cfg->end_bus = cfgx->start_bus - 1;
}
}
diff --git a/arch/xtensa/kernel/pci.c b/arch/xtensa/kernel/pci.c
index b7c0734..cd10269 100644
--- a/arch/xtensa/kernel/pci.c
+++ b/arch/xtensa/kernel/pci.c
@@ -69,26 +69,25 @@
* but we want to try to avoid allocating at 0x2900-0x2bff
* which might have be mirrored at 0x0100-0x03ff..
*/
-void
-pcibios_align_resource(void *data, struct resource *res, resource_size_t size,
- resource_size_t align)
+resource_size_t
+pcibios_align_resource(void *data, const struct resource *res,
+ resource_size_t size, resource_size_t align)
{
struct pci_dev *dev = data;
+ resource_size_t start = res->start;
if (res->flags & IORESOURCE_IO) {
- resource_size_t start = res->start;
-
if (size > 0x100) {
printk(KERN_ERR "PCI: I/O Region %s/%d too large"
" (%ld bytes)\n", pci_name(dev),
dev->resource - res, size);
}
- if (start & 0x300) {
+ if (start & 0x300)
start = (start + 0x3ff) & ~0x3ff;
- res->start = start;
- }
}
+
+ return start;
}
int
diff --git a/crypto/Kconfig b/crypto/Kconfig
index 81c185a..6a2e295 100644
--- a/crypto/Kconfig
+++ b/crypto/Kconfig
@@ -114,6 +114,16 @@
help
These are 'Null' algorithms, used by IPsec, which do nothing.
+config CRYPTO_PCRYPT
+ tristate "Parallel crypto engine (EXPERIMENTAL)"
+ depends on SMP && EXPERIMENTAL
+ select PADATA
+ select CRYPTO_MANAGER
+ select CRYPTO_AEAD
+ help
+ This converts an arbitrary crypto algorithm into a parallel
+ algorithm that executes in kernel threads.
+
config CRYPTO_WORKQUEUE
tristate
diff --git a/crypto/Makefile b/crypto/Makefile
index 9e8f619..d7e6441 100644
--- a/crypto/Makefile
+++ b/crypto/Makefile
@@ -56,6 +56,7 @@
obj-$(CONFIG_CRYPTO_CTR) += ctr.o
obj-$(CONFIG_CRYPTO_GCM) += gcm.o
obj-$(CONFIG_CRYPTO_CCM) += ccm.o
+obj-$(CONFIG_CRYPTO_PCRYPT) += pcrypt.o
obj-$(CONFIG_CRYPTO_CRYPTD) += cryptd.o
obj-$(CONFIG_CRYPTO_DES) += des_generic.o
obj-$(CONFIG_CRYPTO_FCRYPT) += fcrypt.o
diff --git a/crypto/ablkcipher.c b/crypto/ablkcipher.c
index f6f0833..fe980da 100644
--- a/crypto/ablkcipher.c
+++ b/crypto/ablkcipher.c
@@ -1,6 +1,6 @@
/*
* Asynchronous block chaining cipher operations.
- *
+ *
* This is the asynchronous version of blkcipher.c indicating completion
* via a callback.
*
@@ -8,7 +8,7 @@
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
+ * Software Foundation; either version 2 of the License, or (at your option)
* any later version.
*
*/
diff --git a/crypto/aead.c b/crypto/aead.c
index 0a55da7..6729e8f 100644
--- a/crypto/aead.c
+++ b/crypto/aead.c
@@ -1,13 +1,13 @@
/*
* AEAD: Authenticated Encryption with Associated Data
- *
+ *
* This file provides API support for AEAD algorithms.
*
* Copyright (c) 2007 Herbert Xu <herbert@gondor.apana.org.au>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
+ * Software Foundation; either version 2 of the License, or (at your option)
* any later version.
*
*/
diff --git a/crypto/aes_generic.c b/crypto/aes_generic.c
index e78b7ee..a68c73d 100644
--- a/crypto/aes_generic.c
+++ b/crypto/aes_generic.c
@@ -1,4 +1,4 @@
-/*
+/*
* Cryptographic API.
*
* AES Cipher Algorithm.
@@ -1127,7 +1127,7 @@
#define star_x(x) (((x) & 0x7f7f7f7f) << 1) ^ ((((x) & 0x80808080) >> 7) * 0x1b)
-#define imix_col(y,x) do { \
+#define imix_col(y, x) do { \
u = star_x(x); \
v = star_x(u); \
w = star_x(v); \
diff --git a/crypto/algapi.c b/crypto/algapi.c
index f149b1c..3e4524e 100644
--- a/crypto/algapi.c
+++ b/crypto/algapi.c
@@ -230,7 +230,7 @@
list_add(&alg->cra_list, &crypto_alg_list);
list_add(&larval->alg.cra_list, &crypto_alg_list);
-out:
+out:
return larval;
free_larval:
@@ -388,7 +388,7 @@
{
int ret;
LIST_HEAD(list);
-
+
down_write(&crypto_alg_sem);
ret = crypto_remove_alg(alg, &list);
up_write(&crypto_alg_sem);
diff --git a/crypto/anubis.c b/crypto/anubis.c
index e42c3a8..77530d5 100644
--- a/crypto/anubis.c
+++ b/crypto/anubis.c
@@ -469,14 +469,13 @@
u32 kappa[ANUBIS_MAX_N];
u32 inter[ANUBIS_MAX_N];
- switch (key_len)
- {
+ switch (key_len) {
case 16: case 20: case 24: case 28:
case 32: case 36: case 40:
break;
default:
*flags |= CRYPTO_TFM_RES_BAD_KEY_LEN;
- return - EINVAL;
+ return -EINVAL;
}
ctx->key_len = key_len * 8;
@@ -530,23 +529,24 @@
/*
* compute kappa^{r+1} from kappa^r:
*/
- if (r == R) {
+ if (r == R)
break;
- }
for (i = 0; i < N; i++) {
int j = i;
inter[i] = T0[(kappa[j--] >> 24) ];
- if (j < 0) j = N - 1;
+ if (j < 0)
+ j = N - 1;
inter[i] ^= T1[(kappa[j--] >> 16) & 0xff];
- if (j < 0) j = N - 1;
+ if (j < 0)
+ j = N - 1;
inter[i] ^= T2[(kappa[j--] >> 8) & 0xff];
- if (j < 0) j = N - 1;
+ if (j < 0)
+ j = N - 1;
inter[i] ^= T3[(kappa[j ] ) & 0xff];
}
kappa[0] = inter[0] ^ rc[r];
- for (i = 1; i < N; i++) {
+ for (i = 1; i < N; i++)
kappa[i] = inter[i];
- }
}
/*
@@ -690,7 +690,7 @@
static int __init anubis_mod_init(void)
{
int ret = 0;
-
+
ret = crypto_register_alg(&anubis_alg);
return ret;
}
diff --git a/crypto/api.c b/crypto/api.c
index 798526d..033a714 100644
--- a/crypto/api.c
+++ b/crypto/api.c
@@ -10,7 +10,7 @@
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
+ * Software Foundation; either version 2 of the License, or (at your option)
* any later version.
*
*/
@@ -288,11 +288,11 @@
case CRYPTO_ALG_TYPE_COMPRESS:
return crypto_init_compress_ops(tfm);
-
+
default:
break;
}
-
+
BUG();
return -EINVAL;
}
@@ -315,10 +315,9 @@
case CRYPTO_ALG_TYPE_COMPRESS:
crypto_exit_compress_ops(tfm);
break;
-
+
default:
BUG();
-
}
}
@@ -593,12 +592,12 @@
{
int ret = 0;
struct crypto_alg *alg = crypto_alg_mod_lookup(name, type, mask);
-
+
if (!IS_ERR(alg)) {
crypto_mod_put(alg);
ret = 1;
}
-
+
return ret;
}
EXPORT_SYMBOL_GPL(crypto_has_alg);
diff --git a/crypto/authenc.c b/crypto/authenc.c
index 4d6f49a..1887090 100644
--- a/crypto/authenc.c
+++ b/crypto/authenc.c
@@ -194,7 +194,7 @@
scatterwalk_map_and_copy(ihash, areq_ctx->sg, areq_ctx->cryptlen,
authsize, 0);
- err = memcmp(ihash, ahreq->result, authsize) ? -EBADMSG: 0;
+ err = memcmp(ihash, ahreq->result, authsize) ? -EBADMSG : 0;
if (err)
goto out;
@@ -231,7 +231,7 @@
scatterwalk_map_and_copy(ihash, areq_ctx->sg, areq_ctx->cryptlen,
authsize, 0);
- err = memcmp(ihash, ahreq->result, authsize) ? -EBADMSG: 0;
+ err = memcmp(ihash, ahreq->result, authsize) ? -EBADMSG : 0;
if (err)
goto out;
@@ -464,7 +464,7 @@
ihash = ohash + authsize;
scatterwalk_map_and_copy(ihash, areq_ctx->sg, areq_ctx->cryptlen,
authsize, 0);
- return memcmp(ihash, ohash, authsize) ? -EBADMSG: 0;
+ return memcmp(ihash, ohash, authsize) ? -EBADMSG : 0;
}
static int crypto_authenc_iverify(struct aead_request *req, u8 *iv,
@@ -557,11 +557,11 @@
ctx->auth = auth;
ctx->enc = enc;
-
+
tfm->crt_aead.reqsize = max_t(unsigned int,
crypto_ahash_reqsize(auth) + ctx->reqoff +
sizeof(struct authenc_request_ctx) +
- sizeof(struct ahash_request),
+ sizeof(struct ahash_request),
sizeof(struct skcipher_givcrypt_request) +
crypto_ablkcipher_reqsize(enc) +
crypto_ablkcipher_ivsize(enc));
diff --git a/crypto/blowfish.c b/crypto/blowfish.c
index 6f5b487..a67d52e 100644
--- a/crypto/blowfish.c
+++ b/crypto/blowfish.c
@@ -1,4 +1,4 @@
-/*
+/*
* Cryptographic API.
*
* Blowfish Cipher Algorithm, by Bruce Schneier.
@@ -299,7 +299,7 @@
0xb74e6132, 0xce77e25b, 0x578fdfe3, 0x3ac372e6,
};
-/*
+/*
* Round loop unrolling macros, S is a pointer to a S-Box array
* organized in 4 unsigned longs at a row.
*/
@@ -315,7 +315,7 @@
/*
* The blowfish encipher, processes 64-bit blocks.
- * NOTE: This function MUSTN'T respect endianess
+ * NOTE: This function MUSTN'T respect endianess
*/
static void encrypt_block(struct bf_ctx *bctx, u32 *dst, u32 *src)
{
@@ -395,7 +395,7 @@
out_blk[1] = cpu_to_be32(yl);
}
-/*
+/*
* Calculates the blowfish S and P boxes for encryption and decryption.
*/
static int bf_setkey(struct crypto_tfm *tfm, const u8 *key, unsigned int keylen)
@@ -417,10 +417,10 @@
/* Actual subkey generation */
for (j = 0, i = 0; i < 16 + 2; i++) {
- temp = (((u32 )key[j] << 24) |
- ((u32 )key[(j + 1) % keylen] << 16) |
- ((u32 )key[(j + 2) % keylen] << 8) |
- ((u32 )key[(j + 3) % keylen]));
+ temp = (((u32)key[j] << 24) |
+ ((u32)key[(j + 1) % keylen] << 16) |
+ ((u32)key[(j + 2) % keylen] << 8) |
+ ((u32)key[(j + 3) % keylen]));
P[i] = P[i] ^ temp;
j = (j + 4) % keylen;
@@ -444,7 +444,7 @@
S[count + 1] = data[1];
}
}
-
+
/* Bruce says not to bother with the weak key check. */
return 0;
}
diff --git a/crypto/camellia.c b/crypto/camellia.c
index 964635d..64cff46 100644
--- a/crypto/camellia.c
+++ b/crypto/camellia.c
@@ -39,271 +39,271 @@
#include <asm/unaligned.h>
static const u32 camellia_sp1110[256] = {
- 0x70707000,0x82828200,0x2c2c2c00,0xececec00,
- 0xb3b3b300,0x27272700,0xc0c0c000,0xe5e5e500,
- 0xe4e4e400,0x85858500,0x57575700,0x35353500,
- 0xeaeaea00,0x0c0c0c00,0xaeaeae00,0x41414100,
- 0x23232300,0xefefef00,0x6b6b6b00,0x93939300,
- 0x45454500,0x19191900,0xa5a5a500,0x21212100,
- 0xededed00,0x0e0e0e00,0x4f4f4f00,0x4e4e4e00,
- 0x1d1d1d00,0x65656500,0x92929200,0xbdbdbd00,
- 0x86868600,0xb8b8b800,0xafafaf00,0x8f8f8f00,
- 0x7c7c7c00,0xebebeb00,0x1f1f1f00,0xcecece00,
- 0x3e3e3e00,0x30303000,0xdcdcdc00,0x5f5f5f00,
- 0x5e5e5e00,0xc5c5c500,0x0b0b0b00,0x1a1a1a00,
- 0xa6a6a600,0xe1e1e100,0x39393900,0xcacaca00,
- 0xd5d5d500,0x47474700,0x5d5d5d00,0x3d3d3d00,
- 0xd9d9d900,0x01010100,0x5a5a5a00,0xd6d6d600,
- 0x51515100,0x56565600,0x6c6c6c00,0x4d4d4d00,
- 0x8b8b8b00,0x0d0d0d00,0x9a9a9a00,0x66666600,
- 0xfbfbfb00,0xcccccc00,0xb0b0b000,0x2d2d2d00,
- 0x74747400,0x12121200,0x2b2b2b00,0x20202000,
- 0xf0f0f000,0xb1b1b100,0x84848400,0x99999900,
- 0xdfdfdf00,0x4c4c4c00,0xcbcbcb00,0xc2c2c200,
- 0x34343400,0x7e7e7e00,0x76767600,0x05050500,
- 0x6d6d6d00,0xb7b7b700,0xa9a9a900,0x31313100,
- 0xd1d1d100,0x17171700,0x04040400,0xd7d7d700,
- 0x14141400,0x58585800,0x3a3a3a00,0x61616100,
- 0xdedede00,0x1b1b1b00,0x11111100,0x1c1c1c00,
- 0x32323200,0x0f0f0f00,0x9c9c9c00,0x16161600,
- 0x53535300,0x18181800,0xf2f2f200,0x22222200,
- 0xfefefe00,0x44444400,0xcfcfcf00,0xb2b2b200,
- 0xc3c3c300,0xb5b5b500,0x7a7a7a00,0x91919100,
- 0x24242400,0x08080800,0xe8e8e800,0xa8a8a800,
- 0x60606000,0xfcfcfc00,0x69696900,0x50505000,
- 0xaaaaaa00,0xd0d0d000,0xa0a0a000,0x7d7d7d00,
- 0xa1a1a100,0x89898900,0x62626200,0x97979700,
- 0x54545400,0x5b5b5b00,0x1e1e1e00,0x95959500,
- 0xe0e0e000,0xffffff00,0x64646400,0xd2d2d200,
- 0x10101000,0xc4c4c400,0x00000000,0x48484800,
- 0xa3a3a300,0xf7f7f700,0x75757500,0xdbdbdb00,
- 0x8a8a8a00,0x03030300,0xe6e6e600,0xdadada00,
- 0x09090900,0x3f3f3f00,0xdddddd00,0x94949400,
- 0x87878700,0x5c5c5c00,0x83838300,0x02020200,
- 0xcdcdcd00,0x4a4a4a00,0x90909000,0x33333300,
- 0x73737300,0x67676700,0xf6f6f600,0xf3f3f300,
- 0x9d9d9d00,0x7f7f7f00,0xbfbfbf00,0xe2e2e200,
- 0x52525200,0x9b9b9b00,0xd8d8d800,0x26262600,
- 0xc8c8c800,0x37373700,0xc6c6c600,0x3b3b3b00,
- 0x81818100,0x96969600,0x6f6f6f00,0x4b4b4b00,
- 0x13131300,0xbebebe00,0x63636300,0x2e2e2e00,
- 0xe9e9e900,0x79797900,0xa7a7a700,0x8c8c8c00,
- 0x9f9f9f00,0x6e6e6e00,0xbcbcbc00,0x8e8e8e00,
- 0x29292900,0xf5f5f500,0xf9f9f900,0xb6b6b600,
- 0x2f2f2f00,0xfdfdfd00,0xb4b4b400,0x59595900,
- 0x78787800,0x98989800,0x06060600,0x6a6a6a00,
- 0xe7e7e700,0x46464600,0x71717100,0xbababa00,
- 0xd4d4d400,0x25252500,0xababab00,0x42424200,
- 0x88888800,0xa2a2a200,0x8d8d8d00,0xfafafa00,
- 0x72727200,0x07070700,0xb9b9b900,0x55555500,
- 0xf8f8f800,0xeeeeee00,0xacacac00,0x0a0a0a00,
- 0x36363600,0x49494900,0x2a2a2a00,0x68686800,
- 0x3c3c3c00,0x38383800,0xf1f1f100,0xa4a4a400,
- 0x40404000,0x28282800,0xd3d3d300,0x7b7b7b00,
- 0xbbbbbb00,0xc9c9c900,0x43434300,0xc1c1c100,
- 0x15151500,0xe3e3e300,0xadadad00,0xf4f4f400,
- 0x77777700,0xc7c7c700,0x80808000,0x9e9e9e00,
+ 0x70707000, 0x82828200, 0x2c2c2c00, 0xececec00,
+ 0xb3b3b300, 0x27272700, 0xc0c0c000, 0xe5e5e500,
+ 0xe4e4e400, 0x85858500, 0x57575700, 0x35353500,
+ 0xeaeaea00, 0x0c0c0c00, 0xaeaeae00, 0x41414100,
+ 0x23232300, 0xefefef00, 0x6b6b6b00, 0x93939300,
+ 0x45454500, 0x19191900, 0xa5a5a500, 0x21212100,
+ 0xededed00, 0x0e0e0e00, 0x4f4f4f00, 0x4e4e4e00,
+ 0x1d1d1d00, 0x65656500, 0x92929200, 0xbdbdbd00,
+ 0x86868600, 0xb8b8b800, 0xafafaf00, 0x8f8f8f00,
+ 0x7c7c7c00, 0xebebeb00, 0x1f1f1f00, 0xcecece00,
+ 0x3e3e3e00, 0x30303000, 0xdcdcdc00, 0x5f5f5f00,
+ 0x5e5e5e00, 0xc5c5c500, 0x0b0b0b00, 0x1a1a1a00,
+ 0xa6a6a600, 0xe1e1e100, 0x39393900, 0xcacaca00,
+ 0xd5d5d500, 0x47474700, 0x5d5d5d00, 0x3d3d3d00,
+ 0xd9d9d900, 0x01010100, 0x5a5a5a00, 0xd6d6d600,
+ 0x51515100, 0x56565600, 0x6c6c6c00, 0x4d4d4d00,
+ 0x8b8b8b00, 0x0d0d0d00, 0x9a9a9a00, 0x66666600,
+ 0xfbfbfb00, 0xcccccc00, 0xb0b0b000, 0x2d2d2d00,
+ 0x74747400, 0x12121200, 0x2b2b2b00, 0x20202000,
+ 0xf0f0f000, 0xb1b1b100, 0x84848400, 0x99999900,
+ 0xdfdfdf00, 0x4c4c4c00, 0xcbcbcb00, 0xc2c2c200,
+ 0x34343400, 0x7e7e7e00, 0x76767600, 0x05050500,
+ 0x6d6d6d00, 0xb7b7b700, 0xa9a9a900, 0x31313100,
+ 0xd1d1d100, 0x17171700, 0x04040400, 0xd7d7d700,
+ 0x14141400, 0x58585800, 0x3a3a3a00, 0x61616100,
+ 0xdedede00, 0x1b1b1b00, 0x11111100, 0x1c1c1c00,
+ 0x32323200, 0x0f0f0f00, 0x9c9c9c00, 0x16161600,
+ 0x53535300, 0x18181800, 0xf2f2f200, 0x22222200,
+ 0xfefefe00, 0x44444400, 0xcfcfcf00, 0xb2b2b200,
+ 0xc3c3c300, 0xb5b5b500, 0x7a7a7a00, 0x91919100,
+ 0x24242400, 0x08080800, 0xe8e8e800, 0xa8a8a800,
+ 0x60606000, 0xfcfcfc00, 0x69696900, 0x50505000,
+ 0xaaaaaa00, 0xd0d0d000, 0xa0a0a000, 0x7d7d7d00,
+ 0xa1a1a100, 0x89898900, 0x62626200, 0x97979700,
+ 0x54545400, 0x5b5b5b00, 0x1e1e1e00, 0x95959500,
+ 0xe0e0e000, 0xffffff00, 0x64646400, 0xd2d2d200,
+ 0x10101000, 0xc4c4c400, 0x00000000, 0x48484800,
+ 0xa3a3a300, 0xf7f7f700, 0x75757500, 0xdbdbdb00,
+ 0x8a8a8a00, 0x03030300, 0xe6e6e600, 0xdadada00,
+ 0x09090900, 0x3f3f3f00, 0xdddddd00, 0x94949400,
+ 0x87878700, 0x5c5c5c00, 0x83838300, 0x02020200,
+ 0xcdcdcd00, 0x4a4a4a00, 0x90909000, 0x33333300,
+ 0x73737300, 0x67676700, 0xf6f6f600, 0xf3f3f300,
+ 0x9d9d9d00, 0x7f7f7f00, 0xbfbfbf00, 0xe2e2e200,
+ 0x52525200, 0x9b9b9b00, 0xd8d8d800, 0x26262600,
+ 0xc8c8c800, 0x37373700, 0xc6c6c600, 0x3b3b3b00,
+ 0x81818100, 0x96969600, 0x6f6f6f00, 0x4b4b4b00,
+ 0x13131300, 0xbebebe00, 0x63636300, 0x2e2e2e00,
+ 0xe9e9e900, 0x79797900, 0xa7a7a700, 0x8c8c8c00,
+ 0x9f9f9f00, 0x6e6e6e00, 0xbcbcbc00, 0x8e8e8e00,
+ 0x29292900, 0xf5f5f500, 0xf9f9f900, 0xb6b6b600,
+ 0x2f2f2f00, 0xfdfdfd00, 0xb4b4b400, 0x59595900,
+ 0x78787800, 0x98989800, 0x06060600, 0x6a6a6a00,
+ 0xe7e7e700, 0x46464600, 0x71717100, 0xbababa00,
+ 0xd4d4d400, 0x25252500, 0xababab00, 0x42424200,
+ 0x88888800, 0xa2a2a200, 0x8d8d8d00, 0xfafafa00,
+ 0x72727200, 0x07070700, 0xb9b9b900, 0x55555500,
+ 0xf8f8f800, 0xeeeeee00, 0xacacac00, 0x0a0a0a00,
+ 0x36363600, 0x49494900, 0x2a2a2a00, 0x68686800,
+ 0x3c3c3c00, 0x38383800, 0xf1f1f100, 0xa4a4a400,
+ 0x40404000, 0x28282800, 0xd3d3d300, 0x7b7b7b00,
+ 0xbbbbbb00, 0xc9c9c900, 0x43434300, 0xc1c1c100,
+ 0x15151500, 0xe3e3e300, 0xadadad00, 0xf4f4f400,
+ 0x77777700, 0xc7c7c700, 0x80808000, 0x9e9e9e00,
};
static const u32 camellia_sp0222[256] = {
- 0x00e0e0e0,0x00050505,0x00585858,0x00d9d9d9,
- 0x00676767,0x004e4e4e,0x00818181,0x00cbcbcb,
- 0x00c9c9c9,0x000b0b0b,0x00aeaeae,0x006a6a6a,
- 0x00d5d5d5,0x00181818,0x005d5d5d,0x00828282,
- 0x00464646,0x00dfdfdf,0x00d6d6d6,0x00272727,
- 0x008a8a8a,0x00323232,0x004b4b4b,0x00424242,
- 0x00dbdbdb,0x001c1c1c,0x009e9e9e,0x009c9c9c,
- 0x003a3a3a,0x00cacaca,0x00252525,0x007b7b7b,
- 0x000d0d0d,0x00717171,0x005f5f5f,0x001f1f1f,
- 0x00f8f8f8,0x00d7d7d7,0x003e3e3e,0x009d9d9d,
- 0x007c7c7c,0x00606060,0x00b9b9b9,0x00bebebe,
- 0x00bcbcbc,0x008b8b8b,0x00161616,0x00343434,
- 0x004d4d4d,0x00c3c3c3,0x00727272,0x00959595,
- 0x00ababab,0x008e8e8e,0x00bababa,0x007a7a7a,
- 0x00b3b3b3,0x00020202,0x00b4b4b4,0x00adadad,
- 0x00a2a2a2,0x00acacac,0x00d8d8d8,0x009a9a9a,
- 0x00171717,0x001a1a1a,0x00353535,0x00cccccc,
- 0x00f7f7f7,0x00999999,0x00616161,0x005a5a5a,
- 0x00e8e8e8,0x00242424,0x00565656,0x00404040,
- 0x00e1e1e1,0x00636363,0x00090909,0x00333333,
- 0x00bfbfbf,0x00989898,0x00979797,0x00858585,
- 0x00686868,0x00fcfcfc,0x00ececec,0x000a0a0a,
- 0x00dadada,0x006f6f6f,0x00535353,0x00626262,
- 0x00a3a3a3,0x002e2e2e,0x00080808,0x00afafaf,
- 0x00282828,0x00b0b0b0,0x00747474,0x00c2c2c2,
- 0x00bdbdbd,0x00363636,0x00222222,0x00383838,
- 0x00646464,0x001e1e1e,0x00393939,0x002c2c2c,
- 0x00a6a6a6,0x00303030,0x00e5e5e5,0x00444444,
- 0x00fdfdfd,0x00888888,0x009f9f9f,0x00656565,
- 0x00878787,0x006b6b6b,0x00f4f4f4,0x00232323,
- 0x00484848,0x00101010,0x00d1d1d1,0x00515151,
- 0x00c0c0c0,0x00f9f9f9,0x00d2d2d2,0x00a0a0a0,
- 0x00555555,0x00a1a1a1,0x00414141,0x00fafafa,
- 0x00434343,0x00131313,0x00c4c4c4,0x002f2f2f,
- 0x00a8a8a8,0x00b6b6b6,0x003c3c3c,0x002b2b2b,
- 0x00c1c1c1,0x00ffffff,0x00c8c8c8,0x00a5a5a5,
- 0x00202020,0x00898989,0x00000000,0x00909090,
- 0x00474747,0x00efefef,0x00eaeaea,0x00b7b7b7,
- 0x00151515,0x00060606,0x00cdcdcd,0x00b5b5b5,
- 0x00121212,0x007e7e7e,0x00bbbbbb,0x00292929,
- 0x000f0f0f,0x00b8b8b8,0x00070707,0x00040404,
- 0x009b9b9b,0x00949494,0x00212121,0x00666666,
- 0x00e6e6e6,0x00cecece,0x00ededed,0x00e7e7e7,
- 0x003b3b3b,0x00fefefe,0x007f7f7f,0x00c5c5c5,
- 0x00a4a4a4,0x00373737,0x00b1b1b1,0x004c4c4c,
- 0x00919191,0x006e6e6e,0x008d8d8d,0x00767676,
- 0x00030303,0x002d2d2d,0x00dedede,0x00969696,
- 0x00262626,0x007d7d7d,0x00c6c6c6,0x005c5c5c,
- 0x00d3d3d3,0x00f2f2f2,0x004f4f4f,0x00191919,
- 0x003f3f3f,0x00dcdcdc,0x00797979,0x001d1d1d,
- 0x00525252,0x00ebebeb,0x00f3f3f3,0x006d6d6d,
- 0x005e5e5e,0x00fbfbfb,0x00696969,0x00b2b2b2,
- 0x00f0f0f0,0x00313131,0x000c0c0c,0x00d4d4d4,
- 0x00cfcfcf,0x008c8c8c,0x00e2e2e2,0x00757575,
- 0x00a9a9a9,0x004a4a4a,0x00575757,0x00848484,
- 0x00111111,0x00454545,0x001b1b1b,0x00f5f5f5,
- 0x00e4e4e4,0x000e0e0e,0x00737373,0x00aaaaaa,
- 0x00f1f1f1,0x00dddddd,0x00595959,0x00141414,
- 0x006c6c6c,0x00929292,0x00545454,0x00d0d0d0,
- 0x00787878,0x00707070,0x00e3e3e3,0x00494949,
- 0x00808080,0x00505050,0x00a7a7a7,0x00f6f6f6,
- 0x00777777,0x00939393,0x00868686,0x00838383,
- 0x002a2a2a,0x00c7c7c7,0x005b5b5b,0x00e9e9e9,
- 0x00eeeeee,0x008f8f8f,0x00010101,0x003d3d3d,
+ 0x00e0e0e0, 0x00050505, 0x00585858, 0x00d9d9d9,
+ 0x00676767, 0x004e4e4e, 0x00818181, 0x00cbcbcb,
+ 0x00c9c9c9, 0x000b0b0b, 0x00aeaeae, 0x006a6a6a,
+ 0x00d5d5d5, 0x00181818, 0x005d5d5d, 0x00828282,
+ 0x00464646, 0x00dfdfdf, 0x00d6d6d6, 0x00272727,
+ 0x008a8a8a, 0x00323232, 0x004b4b4b, 0x00424242,
+ 0x00dbdbdb, 0x001c1c1c, 0x009e9e9e, 0x009c9c9c,
+ 0x003a3a3a, 0x00cacaca, 0x00252525, 0x007b7b7b,
+ 0x000d0d0d, 0x00717171, 0x005f5f5f, 0x001f1f1f,
+ 0x00f8f8f8, 0x00d7d7d7, 0x003e3e3e, 0x009d9d9d,
+ 0x007c7c7c, 0x00606060, 0x00b9b9b9, 0x00bebebe,
+ 0x00bcbcbc, 0x008b8b8b, 0x00161616, 0x00343434,
+ 0x004d4d4d, 0x00c3c3c3, 0x00727272, 0x00959595,
+ 0x00ababab, 0x008e8e8e, 0x00bababa, 0x007a7a7a,
+ 0x00b3b3b3, 0x00020202, 0x00b4b4b4, 0x00adadad,
+ 0x00a2a2a2, 0x00acacac, 0x00d8d8d8, 0x009a9a9a,
+ 0x00171717, 0x001a1a1a, 0x00353535, 0x00cccccc,
+ 0x00f7f7f7, 0x00999999, 0x00616161, 0x005a5a5a,
+ 0x00e8e8e8, 0x00242424, 0x00565656, 0x00404040,
+ 0x00e1e1e1, 0x00636363, 0x00090909, 0x00333333,
+ 0x00bfbfbf, 0x00989898, 0x00979797, 0x00858585,
+ 0x00686868, 0x00fcfcfc, 0x00ececec, 0x000a0a0a,
+ 0x00dadada, 0x006f6f6f, 0x00535353, 0x00626262,
+ 0x00a3a3a3, 0x002e2e2e, 0x00080808, 0x00afafaf,
+ 0x00282828, 0x00b0b0b0, 0x00747474, 0x00c2c2c2,
+ 0x00bdbdbd, 0x00363636, 0x00222222, 0x00383838,
+ 0x00646464, 0x001e1e1e, 0x00393939, 0x002c2c2c,
+ 0x00a6a6a6, 0x00303030, 0x00e5e5e5, 0x00444444,
+ 0x00fdfdfd, 0x00888888, 0x009f9f9f, 0x00656565,
+ 0x00878787, 0x006b6b6b, 0x00f4f4f4, 0x00232323,
+ 0x00484848, 0x00101010, 0x00d1d1d1, 0x00515151,
+ 0x00c0c0c0, 0x00f9f9f9, 0x00d2d2d2, 0x00a0a0a0,
+ 0x00555555, 0x00a1a1a1, 0x00414141, 0x00fafafa,
+ 0x00434343, 0x00131313, 0x00c4c4c4, 0x002f2f2f,
+ 0x00a8a8a8, 0x00b6b6b6, 0x003c3c3c, 0x002b2b2b,
+ 0x00c1c1c1, 0x00ffffff, 0x00c8c8c8, 0x00a5a5a5,
+ 0x00202020, 0x00898989, 0x00000000, 0x00909090,
+ 0x00474747, 0x00efefef, 0x00eaeaea, 0x00b7b7b7,
+ 0x00151515, 0x00060606, 0x00cdcdcd, 0x00b5b5b5,
+ 0x00121212, 0x007e7e7e, 0x00bbbbbb, 0x00292929,
+ 0x000f0f0f, 0x00b8b8b8, 0x00070707, 0x00040404,
+ 0x009b9b9b, 0x00949494, 0x00212121, 0x00666666,
+ 0x00e6e6e6, 0x00cecece, 0x00ededed, 0x00e7e7e7,
+ 0x003b3b3b, 0x00fefefe, 0x007f7f7f, 0x00c5c5c5,
+ 0x00a4a4a4, 0x00373737, 0x00b1b1b1, 0x004c4c4c,
+ 0x00919191, 0x006e6e6e, 0x008d8d8d, 0x00767676,
+ 0x00030303, 0x002d2d2d, 0x00dedede, 0x00969696,
+ 0x00262626, 0x007d7d7d, 0x00c6c6c6, 0x005c5c5c,
+ 0x00d3d3d3, 0x00f2f2f2, 0x004f4f4f, 0x00191919,
+ 0x003f3f3f, 0x00dcdcdc, 0x00797979, 0x001d1d1d,
+ 0x00525252, 0x00ebebeb, 0x00f3f3f3, 0x006d6d6d,
+ 0x005e5e5e, 0x00fbfbfb, 0x00696969, 0x00b2b2b2,
+ 0x00f0f0f0, 0x00313131, 0x000c0c0c, 0x00d4d4d4,
+ 0x00cfcfcf, 0x008c8c8c, 0x00e2e2e2, 0x00757575,
+ 0x00a9a9a9, 0x004a4a4a, 0x00575757, 0x00848484,
+ 0x00111111, 0x00454545, 0x001b1b1b, 0x00f5f5f5,
+ 0x00e4e4e4, 0x000e0e0e, 0x00737373, 0x00aaaaaa,
+ 0x00f1f1f1, 0x00dddddd, 0x00595959, 0x00141414,
+ 0x006c6c6c, 0x00929292, 0x00545454, 0x00d0d0d0,
+ 0x00787878, 0x00707070, 0x00e3e3e3, 0x00494949,
+ 0x00808080, 0x00505050, 0x00a7a7a7, 0x00f6f6f6,
+ 0x00777777, 0x00939393, 0x00868686, 0x00838383,
+ 0x002a2a2a, 0x00c7c7c7, 0x005b5b5b, 0x00e9e9e9,
+ 0x00eeeeee, 0x008f8f8f, 0x00010101, 0x003d3d3d,
};
static const u32 camellia_sp3033[256] = {
- 0x38003838,0x41004141,0x16001616,0x76007676,
- 0xd900d9d9,0x93009393,0x60006060,0xf200f2f2,
- 0x72007272,0xc200c2c2,0xab00abab,0x9a009a9a,
- 0x75007575,0x06000606,0x57005757,0xa000a0a0,
- 0x91009191,0xf700f7f7,0xb500b5b5,0xc900c9c9,
- 0xa200a2a2,0x8c008c8c,0xd200d2d2,0x90009090,
- 0xf600f6f6,0x07000707,0xa700a7a7,0x27002727,
- 0x8e008e8e,0xb200b2b2,0x49004949,0xde00dede,
- 0x43004343,0x5c005c5c,0xd700d7d7,0xc700c7c7,
- 0x3e003e3e,0xf500f5f5,0x8f008f8f,0x67006767,
- 0x1f001f1f,0x18001818,0x6e006e6e,0xaf00afaf,
- 0x2f002f2f,0xe200e2e2,0x85008585,0x0d000d0d,
- 0x53005353,0xf000f0f0,0x9c009c9c,0x65006565,
- 0xea00eaea,0xa300a3a3,0xae00aeae,0x9e009e9e,
- 0xec00ecec,0x80008080,0x2d002d2d,0x6b006b6b,
- 0xa800a8a8,0x2b002b2b,0x36003636,0xa600a6a6,
- 0xc500c5c5,0x86008686,0x4d004d4d,0x33003333,
- 0xfd00fdfd,0x66006666,0x58005858,0x96009696,
- 0x3a003a3a,0x09000909,0x95009595,0x10001010,
- 0x78007878,0xd800d8d8,0x42004242,0xcc00cccc,
- 0xef00efef,0x26002626,0xe500e5e5,0x61006161,
- 0x1a001a1a,0x3f003f3f,0x3b003b3b,0x82008282,
- 0xb600b6b6,0xdb00dbdb,0xd400d4d4,0x98009898,
- 0xe800e8e8,0x8b008b8b,0x02000202,0xeb00ebeb,
- 0x0a000a0a,0x2c002c2c,0x1d001d1d,0xb000b0b0,
- 0x6f006f6f,0x8d008d8d,0x88008888,0x0e000e0e,
- 0x19001919,0x87008787,0x4e004e4e,0x0b000b0b,
- 0xa900a9a9,0x0c000c0c,0x79007979,0x11001111,
- 0x7f007f7f,0x22002222,0xe700e7e7,0x59005959,
- 0xe100e1e1,0xda00dada,0x3d003d3d,0xc800c8c8,
- 0x12001212,0x04000404,0x74007474,0x54005454,
- 0x30003030,0x7e007e7e,0xb400b4b4,0x28002828,
- 0x55005555,0x68006868,0x50005050,0xbe00bebe,
- 0xd000d0d0,0xc400c4c4,0x31003131,0xcb00cbcb,
- 0x2a002a2a,0xad00adad,0x0f000f0f,0xca00caca,
- 0x70007070,0xff00ffff,0x32003232,0x69006969,
- 0x08000808,0x62006262,0x00000000,0x24002424,
- 0xd100d1d1,0xfb00fbfb,0xba00baba,0xed00eded,
- 0x45004545,0x81008181,0x73007373,0x6d006d6d,
- 0x84008484,0x9f009f9f,0xee00eeee,0x4a004a4a,
- 0xc300c3c3,0x2e002e2e,0xc100c1c1,0x01000101,
- 0xe600e6e6,0x25002525,0x48004848,0x99009999,
- 0xb900b9b9,0xb300b3b3,0x7b007b7b,0xf900f9f9,
- 0xce00cece,0xbf00bfbf,0xdf00dfdf,0x71007171,
- 0x29002929,0xcd00cdcd,0x6c006c6c,0x13001313,
- 0x64006464,0x9b009b9b,0x63006363,0x9d009d9d,
- 0xc000c0c0,0x4b004b4b,0xb700b7b7,0xa500a5a5,
- 0x89008989,0x5f005f5f,0xb100b1b1,0x17001717,
- 0xf400f4f4,0xbc00bcbc,0xd300d3d3,0x46004646,
- 0xcf00cfcf,0x37003737,0x5e005e5e,0x47004747,
- 0x94009494,0xfa00fafa,0xfc00fcfc,0x5b005b5b,
- 0x97009797,0xfe00fefe,0x5a005a5a,0xac00acac,
- 0x3c003c3c,0x4c004c4c,0x03000303,0x35003535,
- 0xf300f3f3,0x23002323,0xb800b8b8,0x5d005d5d,
- 0x6a006a6a,0x92009292,0xd500d5d5,0x21002121,
- 0x44004444,0x51005151,0xc600c6c6,0x7d007d7d,
- 0x39003939,0x83008383,0xdc00dcdc,0xaa00aaaa,
- 0x7c007c7c,0x77007777,0x56005656,0x05000505,
- 0x1b001b1b,0xa400a4a4,0x15001515,0x34003434,
- 0x1e001e1e,0x1c001c1c,0xf800f8f8,0x52005252,
- 0x20002020,0x14001414,0xe900e9e9,0xbd00bdbd,
- 0xdd00dddd,0xe400e4e4,0xa100a1a1,0xe000e0e0,
- 0x8a008a8a,0xf100f1f1,0xd600d6d6,0x7a007a7a,
- 0xbb00bbbb,0xe300e3e3,0x40004040,0x4f004f4f,
+ 0x38003838, 0x41004141, 0x16001616, 0x76007676,
+ 0xd900d9d9, 0x93009393, 0x60006060, 0xf200f2f2,
+ 0x72007272, 0xc200c2c2, 0xab00abab, 0x9a009a9a,
+ 0x75007575, 0x06000606, 0x57005757, 0xa000a0a0,
+ 0x91009191, 0xf700f7f7, 0xb500b5b5, 0xc900c9c9,
+ 0xa200a2a2, 0x8c008c8c, 0xd200d2d2, 0x90009090,
+ 0xf600f6f6, 0x07000707, 0xa700a7a7, 0x27002727,
+ 0x8e008e8e, 0xb200b2b2, 0x49004949, 0xde00dede,
+ 0x43004343, 0x5c005c5c, 0xd700d7d7, 0xc700c7c7,
+ 0x3e003e3e, 0xf500f5f5, 0x8f008f8f, 0x67006767,
+ 0x1f001f1f, 0x18001818, 0x6e006e6e, 0xaf00afaf,
+ 0x2f002f2f, 0xe200e2e2, 0x85008585, 0x0d000d0d,
+ 0x53005353, 0xf000f0f0, 0x9c009c9c, 0x65006565,
+ 0xea00eaea, 0xa300a3a3, 0xae00aeae, 0x9e009e9e,
+ 0xec00ecec, 0x80008080, 0x2d002d2d, 0x6b006b6b,
+ 0xa800a8a8, 0x2b002b2b, 0x36003636, 0xa600a6a6,
+ 0xc500c5c5, 0x86008686, 0x4d004d4d, 0x33003333,
+ 0xfd00fdfd, 0x66006666, 0x58005858, 0x96009696,
+ 0x3a003a3a, 0x09000909, 0x95009595, 0x10001010,
+ 0x78007878, 0xd800d8d8, 0x42004242, 0xcc00cccc,
+ 0xef00efef, 0x26002626, 0xe500e5e5, 0x61006161,
+ 0x1a001a1a, 0x3f003f3f, 0x3b003b3b, 0x82008282,
+ 0xb600b6b6, 0xdb00dbdb, 0xd400d4d4, 0x98009898,
+ 0xe800e8e8, 0x8b008b8b, 0x02000202, 0xeb00ebeb,
+ 0x0a000a0a, 0x2c002c2c, 0x1d001d1d, 0xb000b0b0,
+ 0x6f006f6f, 0x8d008d8d, 0x88008888, 0x0e000e0e,
+ 0x19001919, 0x87008787, 0x4e004e4e, 0x0b000b0b,
+ 0xa900a9a9, 0x0c000c0c, 0x79007979, 0x11001111,
+ 0x7f007f7f, 0x22002222, 0xe700e7e7, 0x59005959,
+ 0xe100e1e1, 0xda00dada, 0x3d003d3d, 0xc800c8c8,
+ 0x12001212, 0x04000404, 0x74007474, 0x54005454,
+ 0x30003030, 0x7e007e7e, 0xb400b4b4, 0x28002828,
+ 0x55005555, 0x68006868, 0x50005050, 0xbe00bebe,
+ 0xd000d0d0, 0xc400c4c4, 0x31003131, 0xcb00cbcb,
+ 0x2a002a2a, 0xad00adad, 0x0f000f0f, 0xca00caca,
+ 0x70007070, 0xff00ffff, 0x32003232, 0x69006969,
+ 0x08000808, 0x62006262, 0x00000000, 0x24002424,
+ 0xd100d1d1, 0xfb00fbfb, 0xba00baba, 0xed00eded,
+ 0x45004545, 0x81008181, 0x73007373, 0x6d006d6d,
+ 0x84008484, 0x9f009f9f, 0xee00eeee, 0x4a004a4a,
+ 0xc300c3c3, 0x2e002e2e, 0xc100c1c1, 0x01000101,
+ 0xe600e6e6, 0x25002525, 0x48004848, 0x99009999,
+ 0xb900b9b9, 0xb300b3b3, 0x7b007b7b, 0xf900f9f9,
+ 0xce00cece, 0xbf00bfbf, 0xdf00dfdf, 0x71007171,
+ 0x29002929, 0xcd00cdcd, 0x6c006c6c, 0x13001313,
+ 0x64006464, 0x9b009b9b, 0x63006363, 0x9d009d9d,
+ 0xc000c0c0, 0x4b004b4b, 0xb700b7b7, 0xa500a5a5,
+ 0x89008989, 0x5f005f5f, 0xb100b1b1, 0x17001717,
+ 0xf400f4f4, 0xbc00bcbc, 0xd300d3d3, 0x46004646,
+ 0xcf00cfcf, 0x37003737, 0x5e005e5e, 0x47004747,
+ 0x94009494, 0xfa00fafa, 0xfc00fcfc, 0x5b005b5b,
+ 0x97009797, 0xfe00fefe, 0x5a005a5a, 0xac00acac,
+ 0x3c003c3c, 0x4c004c4c, 0x03000303, 0x35003535,
+ 0xf300f3f3, 0x23002323, 0xb800b8b8, 0x5d005d5d,
+ 0x6a006a6a, 0x92009292, 0xd500d5d5, 0x21002121,
+ 0x44004444, 0x51005151, 0xc600c6c6, 0x7d007d7d,
+ 0x39003939, 0x83008383, 0xdc00dcdc, 0xaa00aaaa,
+ 0x7c007c7c, 0x77007777, 0x56005656, 0x05000505,
+ 0x1b001b1b, 0xa400a4a4, 0x15001515, 0x34003434,
+ 0x1e001e1e, 0x1c001c1c, 0xf800f8f8, 0x52005252,
+ 0x20002020, 0x14001414, 0xe900e9e9, 0xbd00bdbd,
+ 0xdd00dddd, 0xe400e4e4, 0xa100a1a1, 0xe000e0e0,
+ 0x8a008a8a, 0xf100f1f1, 0xd600d6d6, 0x7a007a7a,
+ 0xbb00bbbb, 0xe300e3e3, 0x40004040, 0x4f004f4f,
};
static const u32 camellia_sp4404[256] = {
- 0x70700070,0x2c2c002c,0xb3b300b3,0xc0c000c0,
- 0xe4e400e4,0x57570057,0xeaea00ea,0xaeae00ae,
- 0x23230023,0x6b6b006b,0x45450045,0xa5a500a5,
- 0xeded00ed,0x4f4f004f,0x1d1d001d,0x92920092,
- 0x86860086,0xafaf00af,0x7c7c007c,0x1f1f001f,
- 0x3e3e003e,0xdcdc00dc,0x5e5e005e,0x0b0b000b,
- 0xa6a600a6,0x39390039,0xd5d500d5,0x5d5d005d,
- 0xd9d900d9,0x5a5a005a,0x51510051,0x6c6c006c,
- 0x8b8b008b,0x9a9a009a,0xfbfb00fb,0xb0b000b0,
- 0x74740074,0x2b2b002b,0xf0f000f0,0x84840084,
- 0xdfdf00df,0xcbcb00cb,0x34340034,0x76760076,
- 0x6d6d006d,0xa9a900a9,0xd1d100d1,0x04040004,
- 0x14140014,0x3a3a003a,0xdede00de,0x11110011,
- 0x32320032,0x9c9c009c,0x53530053,0xf2f200f2,
- 0xfefe00fe,0xcfcf00cf,0xc3c300c3,0x7a7a007a,
- 0x24240024,0xe8e800e8,0x60600060,0x69690069,
- 0xaaaa00aa,0xa0a000a0,0xa1a100a1,0x62620062,
- 0x54540054,0x1e1e001e,0xe0e000e0,0x64640064,
- 0x10100010,0x00000000,0xa3a300a3,0x75750075,
- 0x8a8a008a,0xe6e600e6,0x09090009,0xdddd00dd,
- 0x87870087,0x83830083,0xcdcd00cd,0x90900090,
- 0x73730073,0xf6f600f6,0x9d9d009d,0xbfbf00bf,
- 0x52520052,0xd8d800d8,0xc8c800c8,0xc6c600c6,
- 0x81810081,0x6f6f006f,0x13130013,0x63630063,
- 0xe9e900e9,0xa7a700a7,0x9f9f009f,0xbcbc00bc,
- 0x29290029,0xf9f900f9,0x2f2f002f,0xb4b400b4,
- 0x78780078,0x06060006,0xe7e700e7,0x71710071,
- 0xd4d400d4,0xabab00ab,0x88880088,0x8d8d008d,
- 0x72720072,0xb9b900b9,0xf8f800f8,0xacac00ac,
- 0x36360036,0x2a2a002a,0x3c3c003c,0xf1f100f1,
- 0x40400040,0xd3d300d3,0xbbbb00bb,0x43430043,
- 0x15150015,0xadad00ad,0x77770077,0x80800080,
- 0x82820082,0xecec00ec,0x27270027,0xe5e500e5,
- 0x85850085,0x35350035,0x0c0c000c,0x41410041,
- 0xefef00ef,0x93930093,0x19190019,0x21210021,
- 0x0e0e000e,0x4e4e004e,0x65650065,0xbdbd00bd,
- 0xb8b800b8,0x8f8f008f,0xebeb00eb,0xcece00ce,
- 0x30300030,0x5f5f005f,0xc5c500c5,0x1a1a001a,
- 0xe1e100e1,0xcaca00ca,0x47470047,0x3d3d003d,
- 0x01010001,0xd6d600d6,0x56560056,0x4d4d004d,
- 0x0d0d000d,0x66660066,0xcccc00cc,0x2d2d002d,
- 0x12120012,0x20200020,0xb1b100b1,0x99990099,
- 0x4c4c004c,0xc2c200c2,0x7e7e007e,0x05050005,
- 0xb7b700b7,0x31310031,0x17170017,0xd7d700d7,
- 0x58580058,0x61610061,0x1b1b001b,0x1c1c001c,
- 0x0f0f000f,0x16160016,0x18180018,0x22220022,
- 0x44440044,0xb2b200b2,0xb5b500b5,0x91910091,
- 0x08080008,0xa8a800a8,0xfcfc00fc,0x50500050,
- 0xd0d000d0,0x7d7d007d,0x89890089,0x97970097,
- 0x5b5b005b,0x95950095,0xffff00ff,0xd2d200d2,
- 0xc4c400c4,0x48480048,0xf7f700f7,0xdbdb00db,
- 0x03030003,0xdada00da,0x3f3f003f,0x94940094,
- 0x5c5c005c,0x02020002,0x4a4a004a,0x33330033,
- 0x67670067,0xf3f300f3,0x7f7f007f,0xe2e200e2,
- 0x9b9b009b,0x26260026,0x37370037,0x3b3b003b,
- 0x96960096,0x4b4b004b,0xbebe00be,0x2e2e002e,
- 0x79790079,0x8c8c008c,0x6e6e006e,0x8e8e008e,
- 0xf5f500f5,0xb6b600b6,0xfdfd00fd,0x59590059,
- 0x98980098,0x6a6a006a,0x46460046,0xbaba00ba,
- 0x25250025,0x42420042,0xa2a200a2,0xfafa00fa,
- 0x07070007,0x55550055,0xeeee00ee,0x0a0a000a,
- 0x49490049,0x68680068,0x38380038,0xa4a400a4,
- 0x28280028,0x7b7b007b,0xc9c900c9,0xc1c100c1,
- 0xe3e300e3,0xf4f400f4,0xc7c700c7,0x9e9e009e,
+ 0x70700070, 0x2c2c002c, 0xb3b300b3, 0xc0c000c0,
+ 0xe4e400e4, 0x57570057, 0xeaea00ea, 0xaeae00ae,
+ 0x23230023, 0x6b6b006b, 0x45450045, 0xa5a500a5,
+ 0xeded00ed, 0x4f4f004f, 0x1d1d001d, 0x92920092,
+ 0x86860086, 0xafaf00af, 0x7c7c007c, 0x1f1f001f,
+ 0x3e3e003e, 0xdcdc00dc, 0x5e5e005e, 0x0b0b000b,
+ 0xa6a600a6, 0x39390039, 0xd5d500d5, 0x5d5d005d,
+ 0xd9d900d9, 0x5a5a005a, 0x51510051, 0x6c6c006c,
+ 0x8b8b008b, 0x9a9a009a, 0xfbfb00fb, 0xb0b000b0,
+ 0x74740074, 0x2b2b002b, 0xf0f000f0, 0x84840084,
+ 0xdfdf00df, 0xcbcb00cb, 0x34340034, 0x76760076,
+ 0x6d6d006d, 0xa9a900a9, 0xd1d100d1, 0x04040004,
+ 0x14140014, 0x3a3a003a, 0xdede00de, 0x11110011,
+ 0x32320032, 0x9c9c009c, 0x53530053, 0xf2f200f2,
+ 0xfefe00fe, 0xcfcf00cf, 0xc3c300c3, 0x7a7a007a,
+ 0x24240024, 0xe8e800e8, 0x60600060, 0x69690069,
+ 0xaaaa00aa, 0xa0a000a0, 0xa1a100a1, 0x62620062,
+ 0x54540054, 0x1e1e001e, 0xe0e000e0, 0x64640064,
+ 0x10100010, 0x00000000, 0xa3a300a3, 0x75750075,
+ 0x8a8a008a, 0xe6e600e6, 0x09090009, 0xdddd00dd,
+ 0x87870087, 0x83830083, 0xcdcd00cd, 0x90900090,
+ 0x73730073, 0xf6f600f6, 0x9d9d009d, 0xbfbf00bf,
+ 0x52520052, 0xd8d800d8, 0xc8c800c8, 0xc6c600c6,
+ 0x81810081, 0x6f6f006f, 0x13130013, 0x63630063,
+ 0xe9e900e9, 0xa7a700a7, 0x9f9f009f, 0xbcbc00bc,
+ 0x29290029, 0xf9f900f9, 0x2f2f002f, 0xb4b400b4,
+ 0x78780078, 0x06060006, 0xe7e700e7, 0x71710071,
+ 0xd4d400d4, 0xabab00ab, 0x88880088, 0x8d8d008d,
+ 0x72720072, 0xb9b900b9, 0xf8f800f8, 0xacac00ac,
+ 0x36360036, 0x2a2a002a, 0x3c3c003c, 0xf1f100f1,
+ 0x40400040, 0xd3d300d3, 0xbbbb00bb, 0x43430043,
+ 0x15150015, 0xadad00ad, 0x77770077, 0x80800080,
+ 0x82820082, 0xecec00ec, 0x27270027, 0xe5e500e5,
+ 0x85850085, 0x35350035, 0x0c0c000c, 0x41410041,
+ 0xefef00ef, 0x93930093, 0x19190019, 0x21210021,
+ 0x0e0e000e, 0x4e4e004e, 0x65650065, 0xbdbd00bd,
+ 0xb8b800b8, 0x8f8f008f, 0xebeb00eb, 0xcece00ce,
+ 0x30300030, 0x5f5f005f, 0xc5c500c5, 0x1a1a001a,
+ 0xe1e100e1, 0xcaca00ca, 0x47470047, 0x3d3d003d,
+ 0x01010001, 0xd6d600d6, 0x56560056, 0x4d4d004d,
+ 0x0d0d000d, 0x66660066, 0xcccc00cc, 0x2d2d002d,
+ 0x12120012, 0x20200020, 0xb1b100b1, 0x99990099,
+ 0x4c4c004c, 0xc2c200c2, 0x7e7e007e, 0x05050005,
+ 0xb7b700b7, 0x31310031, 0x17170017, 0xd7d700d7,
+ 0x58580058, 0x61610061, 0x1b1b001b, 0x1c1c001c,
+ 0x0f0f000f, 0x16160016, 0x18180018, 0x22220022,
+ 0x44440044, 0xb2b200b2, 0xb5b500b5, 0x91910091,
+ 0x08080008, 0xa8a800a8, 0xfcfc00fc, 0x50500050,
+ 0xd0d000d0, 0x7d7d007d, 0x89890089, 0x97970097,
+ 0x5b5b005b, 0x95950095, 0xffff00ff, 0xd2d200d2,
+ 0xc4c400c4, 0x48480048, 0xf7f700f7, 0xdbdb00db,
+ 0x03030003, 0xdada00da, 0x3f3f003f, 0x94940094,
+ 0x5c5c005c, 0x02020002, 0x4a4a004a, 0x33330033,
+ 0x67670067, 0xf3f300f3, 0x7f7f007f, 0xe2e200e2,
+ 0x9b9b009b, 0x26260026, 0x37370037, 0x3b3b003b,
+ 0x96960096, 0x4b4b004b, 0xbebe00be, 0x2e2e002e,
+ 0x79790079, 0x8c8c008c, 0x6e6e006e, 0x8e8e008e,
+ 0xf5f500f5, 0xb6b600b6, 0xfdfd00fd, 0x59590059,
+ 0x98980098, 0x6a6a006a, 0x46460046, 0xbaba00ba,
+ 0x25250025, 0x42420042, 0xa2a200a2, 0xfafa00fa,
+ 0x07070007, 0x55550055, 0xeeee00ee, 0x0a0a000a,
+ 0x49490049, 0x68680068, 0x38380038, 0xa4a400a4,
+ 0x28280028, 0x7b7b007b, 0xc9c900c9, 0xc1c100c1,
+ 0xe3e300e3, 0xf4f400f4, 0xc7c700c7, 0x9e9e009e,
};
@@ -344,7 +344,7 @@
lr = (lr << bits) + (rl >> (32 - bits)); \
rl = (rl << bits) + (rr >> (32 - bits)); \
rr = (rr << bits) + (w0 >> (32 - bits)); \
- } while(0)
+ } while (0)
#define ROLDQo32(ll, lr, rl, rr, w0, w1, bits) \
do { \
@@ -354,7 +354,7 @@
lr = (rl << (bits - 32)) + (rr >> (64 - bits)); \
rl = (rr << (bits - 32)) + (w0 >> (64 - bits)); \
rr = (w0 << (bits - 32)) + (w1 >> (64 - bits)); \
- } while(0)
+ } while (0)
#define CAMELLIA_F(xl, xr, kl, kr, yl, yr, il, ir, t0, t1) \
do { \
@@ -373,7 +373,7 @@
yl ^= yr; \
yr = ror32(yr, 8); \
yr ^= yl; \
- } while(0)
+ } while (0)
#define SUBKEY_L(INDEX) (subkey[(INDEX)*2])
#define SUBKEY_R(INDEX) (subkey[(INDEX)*2 + 1])
@@ -835,7 +835,7 @@
static void camellia_setup192(const unsigned char *key, u32 *subkey)
{
unsigned char kk[32];
- u32 krll, krlr, krrl,krrr;
+ u32 krll, krlr, krrl, krrr;
memcpy(kk, key, 24);
memcpy((unsigned char *)&krll, key+16, 4);
@@ -865,7 +865,7 @@
t1 |= lr; \
ll ^= t1; \
rr ^= rol32(t3, 1); \
- } while(0)
+ } while (0)
#define CAMELLIA_ROUNDSM(xl, xr, kl, kr, yl, yr, il, ir) \
do { \
@@ -881,12 +881,12 @@
ir ^= il ^ kr; \
yl ^= ir; \
yr ^= ror32(il, 8) ^ ir; \
- } while(0)
+ } while (0)
/* max = 24: 128bit encrypt, max = 32: 256bit encrypt */
static void camellia_do_encrypt(const u32 *subkey, u32 *io, unsigned max)
{
- u32 il,ir,t0,t1; /* temporary variables */
+ u32 il, ir, t0, t1; /* temporary variables */
/* pre whitening but absorb kw2 */
io[0] ^= SUBKEY_L(0);
@@ -894,30 +894,30 @@
/* main iteration */
#define ROUNDS(i) do { \
- CAMELLIA_ROUNDSM(io[0],io[1], \
- SUBKEY_L(i + 2),SUBKEY_R(i + 2), \
- io[2],io[3],il,ir); \
- CAMELLIA_ROUNDSM(io[2],io[3], \
- SUBKEY_L(i + 3),SUBKEY_R(i + 3), \
- io[0],io[1],il,ir); \
- CAMELLIA_ROUNDSM(io[0],io[1], \
- SUBKEY_L(i + 4),SUBKEY_R(i + 4), \
- io[2],io[3],il,ir); \
- CAMELLIA_ROUNDSM(io[2],io[3], \
- SUBKEY_L(i + 5),SUBKEY_R(i + 5), \
- io[0],io[1],il,ir); \
- CAMELLIA_ROUNDSM(io[0],io[1], \
- SUBKEY_L(i + 6),SUBKEY_R(i + 6), \
- io[2],io[3],il,ir); \
- CAMELLIA_ROUNDSM(io[2],io[3], \
- SUBKEY_L(i + 7),SUBKEY_R(i + 7), \
- io[0],io[1],il,ir); \
+ CAMELLIA_ROUNDSM(io[0], io[1], \
+ SUBKEY_L(i + 2), SUBKEY_R(i + 2), \
+ io[2], io[3], il, ir); \
+ CAMELLIA_ROUNDSM(io[2], io[3], \
+ SUBKEY_L(i + 3), SUBKEY_R(i + 3), \
+ io[0], io[1], il, ir); \
+ CAMELLIA_ROUNDSM(io[0], io[1], \
+ SUBKEY_L(i + 4), SUBKEY_R(i + 4), \
+ io[2], io[3], il, ir); \
+ CAMELLIA_ROUNDSM(io[2], io[3], \
+ SUBKEY_L(i + 5), SUBKEY_R(i + 5), \
+ io[0], io[1], il, ir); \
+ CAMELLIA_ROUNDSM(io[0], io[1], \
+ SUBKEY_L(i + 6), SUBKEY_R(i + 6), \
+ io[2], io[3], il, ir); \
+ CAMELLIA_ROUNDSM(io[2], io[3], \
+ SUBKEY_L(i + 7), SUBKEY_R(i + 7), \
+ io[0], io[1], il, ir); \
} while (0)
#define FLS(i) do { \
- CAMELLIA_FLS(io[0],io[1],io[2],io[3], \
- SUBKEY_L(i + 0),SUBKEY_R(i + 0), \
- SUBKEY_L(i + 1),SUBKEY_R(i + 1), \
- t0,t1,il,ir); \
+ CAMELLIA_FLS(io[0], io[1], io[2], io[3], \
+ SUBKEY_L(i + 0), SUBKEY_R(i + 0), \
+ SUBKEY_L(i + 1), SUBKEY_R(i + 1), \
+ t0, t1, il, ir); \
} while (0)
ROUNDS(0);
@@ -941,7 +941,7 @@
static void camellia_do_decrypt(const u32 *subkey, u32 *io, unsigned i)
{
- u32 il,ir,t0,t1; /* temporary variables */
+ u32 il, ir, t0, t1; /* temporary variables */
/* pre whitening but absorb kw2 */
io[0] ^= SUBKEY_L(i);
@@ -949,30 +949,30 @@
/* main iteration */
#define ROUNDS(i) do { \
- CAMELLIA_ROUNDSM(io[0],io[1], \
- SUBKEY_L(i + 7),SUBKEY_R(i + 7), \
- io[2],io[3],il,ir); \
- CAMELLIA_ROUNDSM(io[2],io[3], \
- SUBKEY_L(i + 6),SUBKEY_R(i + 6), \
- io[0],io[1],il,ir); \
- CAMELLIA_ROUNDSM(io[0],io[1], \
- SUBKEY_L(i + 5),SUBKEY_R(i + 5), \
- io[2],io[3],il,ir); \
- CAMELLIA_ROUNDSM(io[2],io[3], \
- SUBKEY_L(i + 4),SUBKEY_R(i + 4), \
- io[0],io[1],il,ir); \
- CAMELLIA_ROUNDSM(io[0],io[1], \
- SUBKEY_L(i + 3),SUBKEY_R(i + 3), \
- io[2],io[3],il,ir); \
- CAMELLIA_ROUNDSM(io[2],io[3], \
- SUBKEY_L(i + 2),SUBKEY_R(i + 2), \
- io[0],io[1],il,ir); \
+ CAMELLIA_ROUNDSM(io[0], io[1], \
+ SUBKEY_L(i + 7), SUBKEY_R(i + 7), \
+ io[2], io[3], il, ir); \
+ CAMELLIA_ROUNDSM(io[2], io[3], \
+ SUBKEY_L(i + 6), SUBKEY_R(i + 6), \
+ io[0], io[1], il, ir); \
+ CAMELLIA_ROUNDSM(io[0], io[1], \
+ SUBKEY_L(i + 5), SUBKEY_R(i + 5), \
+ io[2], io[3], il, ir); \
+ CAMELLIA_ROUNDSM(io[2], io[3], \
+ SUBKEY_L(i + 4), SUBKEY_R(i + 4), \
+ io[0], io[1], il, ir); \
+ CAMELLIA_ROUNDSM(io[0], io[1], \
+ SUBKEY_L(i + 3), SUBKEY_R(i + 3), \
+ io[2], io[3], il, ir); \
+ CAMELLIA_ROUNDSM(io[2], io[3], \
+ SUBKEY_L(i + 2), SUBKEY_R(i + 2), \
+ io[0], io[1], il, ir); \
} while (0)
#define FLS(i) do { \
- CAMELLIA_FLS(io[0],io[1],io[2],io[3], \
- SUBKEY_L(i + 1),SUBKEY_R(i + 1), \
- SUBKEY_L(i + 0),SUBKEY_R(i + 0), \
- t0,t1,il,ir); \
+ CAMELLIA_FLS(io[0], io[1], io[2], io[3], \
+ SUBKEY_L(i + 1), SUBKEY_R(i + 1), \
+ SUBKEY_L(i + 0), SUBKEY_R(i + 0), \
+ t0, t1, il, ir); \
} while (0)
if (i == 32) {
diff --git a/crypto/cast5.c b/crypto/cast5.c
index 8cbe28f..a1d2294 100644
--- a/crypto/cast5.c
+++ b/crypto/cast5.c
@@ -569,12 +569,12 @@
0xeaee6801, 0x8db2a283, 0xea8bf59e
};
-#define F1(D,m,r) ( (I = ((m) + (D))), (I=rol32(I,(r))), \
- (((s1[I >> 24] ^ s2[(I>>16)&0xff]) - s3[(I>>8)&0xff]) + s4[I&0xff]) )
-#define F2(D,m,r) ( (I = ((m) ^ (D))), (I=rol32(I,(r))), \
- (((s1[I >> 24] - s2[(I>>16)&0xff]) + s3[(I>>8)&0xff]) ^ s4[I&0xff]) )
-#define F3(D,m,r) ( (I = ((m) - (D))), (I=rol32(I,(r))), \
- (((s1[I >> 24] + s2[(I>>16)&0xff]) ^ s3[(I>>8)&0xff]) - s4[I&0xff]) )
+#define F1(D, m, r) ((I = ((m) + (D))), (I = rol32(I, (r))), \
+ (((s1[I >> 24] ^ s2[(I>>16)&0xff]) - s3[(I>>8)&0xff]) + s4[I&0xff]))
+#define F2(D, m, r) ((I = ((m) ^ (D))), (I = rol32(I, (r))), \
+ (((s1[I >> 24] - s2[(I>>16)&0xff]) + s3[(I>>8)&0xff]) ^ s4[I&0xff]))
+#define F3(D, m, r) ((I = ((m) - (D))), (I = rol32(I, (r))), \
+ (((s1[I >> 24] + s2[(I>>16)&0xff]) ^ s3[(I>>8)&0xff]) - s4[I&0xff]))
static void cast5_encrypt(struct crypto_tfm *tfm, u8 *outbuf, const u8 *inbuf)
@@ -694,7 +694,7 @@
dst[1] = cpu_to_be32(l);
}
-static void key_schedule(u32 * x, u32 * z, u32 * k)
+static void key_schedule(u32 *x, u32 *z, u32 *k)
{
#define xi(i) ((x[(i)/4] >> (8*(3-((i)%4)))) & 0xff)
diff --git a/crypto/cast6.c b/crypto/cast6.c
index 007d02b..e0c15a6 100644
--- a/crypto/cast6.c
+++ b/crypto/cast6.c
@@ -11,7 +11,7 @@
* under the terms of GNU General Public License as published by the Free
* Software Foundation; either version 2 of the License, or (at your option)
* any later version.
- *
+ *
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
@@ -35,12 +35,12 @@
u8 Kr[12][4];
};
-#define F1(D,r,m) ( (I = ((m) + (D))), (I=rol32(I,(r))), \
- (((s1[I >> 24] ^ s2[(I>>16)&0xff]) - s3[(I>>8)&0xff]) + s4[I&0xff]) )
-#define F2(D,r,m) ( (I = ((m) ^ (D))), (I=rol32(I,(r))), \
- (((s1[I >> 24] - s2[(I>>16)&0xff]) + s3[(I>>8)&0xff]) ^ s4[I&0xff]) )
-#define F3(D,r,m) ( (I = ((m) - (D))), (I=rol32(I,(r))), \
- (((s1[I >> 24] + s2[(I>>16)&0xff]) ^ s3[(I>>8)&0xff]) - s4[I&0xff]) )
+#define F1(D, r, m) ((I = ((m) + (D))), (I = rol32(I, (r))), \
+ (((s1[I >> 24] ^ s2[(I>>16)&0xff]) - s3[(I>>8)&0xff]) + s4[I&0xff]))
+#define F2(D, r, m) ((I = ((m) ^ (D))), (I = rol32(I, (r))), \
+ (((s1[I >> 24] - s2[(I>>16)&0xff]) + s3[(I>>8)&0xff]) ^ s4[I&0xff]))
+#define F3(D, r, m) ((I = ((m) - (D))), (I = rol32(I, (r))), \
+ (((s1[I >> 24] + s2[(I>>16)&0xff]) ^ s3[(I>>8)&0xff]) - s4[I&0xff]))
static const u32 s1[256] = {
0x30fb40d4, 0x9fa0ff0b, 0x6beccd2f, 0x3f258c7a, 0x1e213f2f,
@@ -312,7 +312,7 @@
static const u32 Tm[24][8] = {
{ 0x5a827999, 0xc95c653a, 0x383650db, 0xa7103c7c, 0x15ea281d,
- 0x84c413be, 0xf39dff5f, 0x6277eb00 } ,
+ 0x84c413be, 0xf39dff5f, 0x6277eb00 } ,
{ 0xd151d6a1, 0x402bc242, 0xaf05ade3, 0x1ddf9984, 0x8cb98525,
0xfb9370c6, 0x6a6d5c67, 0xd9474808 } ,
{ 0x482133a9, 0xb6fb1f4a, 0x25d50aeb, 0x94aef68c, 0x0388e22d,
@@ -369,7 +369,8 @@
};
/* forward octave */
-static void W(u32 *key, unsigned int i) {
+static void W(u32 *key, unsigned int i)
+{
u32 I;
key[6] ^= F1(key[7], Tr[i % 4][0], Tm[i][0]);
key[5] ^= F2(key[6], Tr[i % 4][1], Tm[i][1]);
@@ -377,7 +378,7 @@
key[3] ^= F1(key[4], Tr[i % 4][3], Tm[i][3]);
key[2] ^= F2(key[3], Tr[i % 4][4], Tm[i][4]);
key[1] ^= F3(key[2], Tr[i % 4][5], Tm[i][5]);
- key[0] ^= F1(key[1], Tr[i % 4][6], Tm[i][6]);
+ key[0] ^= F1(key[1], Tr[i % 4][6], Tm[i][6]);
key[7] ^= F2(key[0], Tr[i % 4][7], Tm[i][7]);
}
@@ -393,11 +394,11 @@
if (key_len % 4 != 0) {
*flags |= CRYPTO_TFM_RES_BAD_KEY_LEN;
return -EINVAL;
- }
+ }
- memset (p_key, 0, 32);
- memcpy (p_key, in_key, key_len);
-
+ memset(p_key, 0, 32);
+ memcpy(p_key, in_key, key_len);
+
key[0] = be32_to_cpu(p_key[0]); /* A */
key[1] = be32_to_cpu(p_key[1]); /* B */
key[2] = be32_to_cpu(p_key[2]); /* C */
@@ -406,18 +407,16 @@
key[5] = be32_to_cpu(p_key[5]); /* F */
key[6] = be32_to_cpu(p_key[6]); /* G */
key[7] = be32_to_cpu(p_key[7]); /* H */
-
-
for (i = 0; i < 12; i++) {
- W (key, 2 * i);
- W (key, 2 * i + 1);
-
+ W(key, 2 * i);
+ W(key, 2 * i + 1);
+
c->Kr[i][0] = key[0] & 0x1f;
c->Kr[i][1] = key[2] & 0x1f;
c->Kr[i][2] = key[4] & 0x1f;
c->Kr[i][3] = key[6] & 0x1f;
-
+
c->Km[i][0] = key[7];
c->Km[i][1] = key[5];
c->Km[i][2] = key[3];
@@ -428,21 +427,23 @@
}
/*forward quad round*/
-static void Q (u32 * block, u8 * Kr, u32 * Km) {
+static void Q(u32 *block, u8 *Kr, u32 *Km)
+{
u32 I;
block[2] ^= F1(block[3], Kr[0], Km[0]);
block[1] ^= F2(block[2], Kr[1], Km[1]);
block[0] ^= F3(block[1], Kr[2], Km[2]);
- block[3] ^= F1(block[0], Kr[3], Km[3]);
+ block[3] ^= F1(block[0], Kr[3], Km[3]);
}
/*reverse quad round*/
-static void QBAR (u32 * block, u8 * Kr, u32 * Km) {
+static void QBAR(u32 *block, u8 *Kr, u32 *Km)
+{
u32 I;
- block[3] ^= F1(block[0], Kr[3], Km[3]);
- block[0] ^= F3(block[1], Kr[2], Km[2]);
- block[1] ^= F2(block[2], Kr[1], Km[1]);
- block[2] ^= F1(block[3], Kr[0], Km[0]);
+ block[3] ^= F1(block[0], Kr[3], Km[3]);
+ block[0] ^= F3(block[1], Kr[2], Km[2]);
+ block[1] ^= F2(block[2], Kr[1], Km[1]);
+ block[2] ^= F1(block[3], Kr[0], Km[0]);
}
static void cast6_encrypt(struct crypto_tfm *tfm, u8 *outbuf, const u8 *inbuf)
@@ -451,64 +452,65 @@
const __be32 *src = (const __be32 *)inbuf;
__be32 *dst = (__be32 *)outbuf;
u32 block[4];
- u32 * Km;
- u8 * Kr;
+ u32 *Km;
+ u8 *Kr;
block[0] = be32_to_cpu(src[0]);
block[1] = be32_to_cpu(src[1]);
block[2] = be32_to_cpu(src[2]);
block[3] = be32_to_cpu(src[3]);
- Km = c->Km[0]; Kr = c->Kr[0]; Q (block, Kr, Km);
- Km = c->Km[1]; Kr = c->Kr[1]; Q (block, Kr, Km);
- Km = c->Km[2]; Kr = c->Kr[2]; Q (block, Kr, Km);
- Km = c->Km[3]; Kr = c->Kr[3]; Q (block, Kr, Km);
- Km = c->Km[4]; Kr = c->Kr[4]; Q (block, Kr, Km);
- Km = c->Km[5]; Kr = c->Kr[5]; Q (block, Kr, Km);
- Km = c->Km[6]; Kr = c->Kr[6]; QBAR (block, Kr, Km);
- Km = c->Km[7]; Kr = c->Kr[7]; QBAR (block, Kr, Km);
- Km = c->Km[8]; Kr = c->Kr[8]; QBAR (block, Kr, Km);
- Km = c->Km[9]; Kr = c->Kr[9]; QBAR (block, Kr, Km);
- Km = c->Km[10]; Kr = c->Kr[10]; QBAR (block, Kr, Km);
- Km = c->Km[11]; Kr = c->Kr[11]; QBAR (block, Kr, Km);
+ Km = c->Km[0]; Kr = c->Kr[0]; Q(block, Kr, Km);
+ Km = c->Km[1]; Kr = c->Kr[1]; Q(block, Kr, Km);
+ Km = c->Km[2]; Kr = c->Kr[2]; Q(block, Kr, Km);
+ Km = c->Km[3]; Kr = c->Kr[3]; Q(block, Kr, Km);
+ Km = c->Km[4]; Kr = c->Kr[4]; Q(block, Kr, Km);
+ Km = c->Km[5]; Kr = c->Kr[5]; Q(block, Kr, Km);
+ Km = c->Km[6]; Kr = c->Kr[6]; QBAR(block, Kr, Km);
+ Km = c->Km[7]; Kr = c->Kr[7]; QBAR(block, Kr, Km);
+ Km = c->Km[8]; Kr = c->Kr[8]; QBAR(block, Kr, Km);
+ Km = c->Km[9]; Kr = c->Kr[9]; QBAR(block, Kr, Km);
+ Km = c->Km[10]; Kr = c->Kr[10]; QBAR(block, Kr, Km);
+ Km = c->Km[11]; Kr = c->Kr[11]; QBAR(block, Kr, Km);
dst[0] = cpu_to_be32(block[0]);
dst[1] = cpu_to_be32(block[1]);
dst[2] = cpu_to_be32(block[2]);
dst[3] = cpu_to_be32(block[3]);
-}
+}
-static void cast6_decrypt(struct crypto_tfm *tfm, u8 *outbuf, const u8 *inbuf) {
- struct cast6_ctx * c = crypto_tfm_ctx(tfm);
+static void cast6_decrypt(struct crypto_tfm *tfm, u8 *outbuf, const u8 *inbuf)
+{
+ struct cast6_ctx *c = crypto_tfm_ctx(tfm);
const __be32 *src = (const __be32 *)inbuf;
__be32 *dst = (__be32 *)outbuf;
u32 block[4];
- u32 * Km;
- u8 * Kr;
+ u32 *Km;
+ u8 *Kr;
block[0] = be32_to_cpu(src[0]);
block[1] = be32_to_cpu(src[1]);
block[2] = be32_to_cpu(src[2]);
block[3] = be32_to_cpu(src[3]);
- Km = c->Km[11]; Kr = c->Kr[11]; Q (block, Kr, Km);
- Km = c->Km[10]; Kr = c->Kr[10]; Q (block, Kr, Km);
- Km = c->Km[9]; Kr = c->Kr[9]; Q (block, Kr, Km);
- Km = c->Km[8]; Kr = c->Kr[8]; Q (block, Kr, Km);
- Km = c->Km[7]; Kr = c->Kr[7]; Q (block, Kr, Km);
- Km = c->Km[6]; Kr = c->Kr[6]; Q (block, Kr, Km);
- Km = c->Km[5]; Kr = c->Kr[5]; QBAR (block, Kr, Km);
- Km = c->Km[4]; Kr = c->Kr[4]; QBAR (block, Kr, Km);
- Km = c->Km[3]; Kr = c->Kr[3]; QBAR (block, Kr, Km);
- Km = c->Km[2]; Kr = c->Kr[2]; QBAR (block, Kr, Km);
- Km = c->Km[1]; Kr = c->Kr[1]; QBAR (block, Kr, Km);
- Km = c->Km[0]; Kr = c->Kr[0]; QBAR (block, Kr, Km);
-
+ Km = c->Km[11]; Kr = c->Kr[11]; Q(block, Kr, Km);
+ Km = c->Km[10]; Kr = c->Kr[10]; Q(block, Kr, Km);
+ Km = c->Km[9]; Kr = c->Kr[9]; Q(block, Kr, Km);
+ Km = c->Km[8]; Kr = c->Kr[8]; Q(block, Kr, Km);
+ Km = c->Km[7]; Kr = c->Kr[7]; Q(block, Kr, Km);
+ Km = c->Km[6]; Kr = c->Kr[6]; Q(block, Kr, Km);
+ Km = c->Km[5]; Kr = c->Kr[5]; QBAR(block, Kr, Km);
+ Km = c->Km[4]; Kr = c->Kr[4]; QBAR(block, Kr, Km);
+ Km = c->Km[3]; Kr = c->Kr[3]; QBAR(block, Kr, Km);
+ Km = c->Km[2]; Kr = c->Kr[2]; QBAR(block, Kr, Km);
+ Km = c->Km[1]; Kr = c->Kr[1]; QBAR(block, Kr, Km);
+ Km = c->Km[0]; Kr = c->Kr[0]; QBAR(block, Kr, Km);
+
dst[0] = cpu_to_be32(block[0]);
dst[1] = cpu_to_be32(block[1]);
dst[2] = cpu_to_be32(block[2]);
dst[3] = cpu_to_be32(block[3]);
-}
+}
static struct crypto_alg alg = {
.cra_name = "cast6",
diff --git a/crypto/cipher.c b/crypto/cipher.c
index 9a1a731..39541e0 100644
--- a/crypto/cipher.c
+++ b/crypto/cipher.c
@@ -8,7 +8,7 @@
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
+ * Software Foundation; either version 2 of the License, or (at your option)
* any later version.
*
*/
diff --git a/crypto/compress.c b/crypto/compress.c
index 1ee3570..c33f076 100644
--- a/crypto/compress.c
+++ b/crypto/compress.c
@@ -7,7 +7,7 @@
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
+ * Software Foundation; either version 2 of the License, or (at your option)
* any later version.
*
*/
@@ -39,7 +39,7 @@
ops->cot_compress = crypto_compress;
ops->cot_decompress = crypto_decompress;
-
+
return 0;
}
diff --git a/crypto/crc32c.c b/crypto/crc32c.c
index 973bc2c..de9e55c 100644
--- a/crypto/crc32c.c
+++ b/crypto/crc32c.c
@@ -1,4 +1,4 @@
-/*
+/*
* Cryptographic API.
*
* CRC32C chksum
@@ -30,7 +30,7 @@
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
+ * Software Foundation; either version 2 of the License, or (at your option)
* any later version.
*
*/
@@ -142,7 +142,7 @@
}
/*
- * Steps through buffer one byte at at time, calculates reflected
+ * Steps through buffer one byte at at time, calculates reflected
* crc using table.
*/
diff --git a/crypto/crypto_null.c b/crypto/crypto_null.c
index cb71c91..07a8a96 100644
--- a/crypto/crypto_null.c
+++ b/crypto/crypto_null.c
@@ -1,11 +1,11 @@
-/*
+/*
* Cryptographic API.
*
* Null algorithms, aka Much Ado About Nothing.
*
* These are needed for IPsec, and may be useful in general for
* testing & debugging.
- *
+ *
* The null cipher is compliant with RFC2410.
*
* Copyright (c) 2002 James Morris <jmorris@intercode.com.au>
@@ -163,7 +163,7 @@
static int __init crypto_null_mod_init(void)
{
int ret = 0;
-
+
ret = crypto_register_alg(&cipher_null);
if (ret < 0)
goto out;
@@ -180,7 +180,7 @@
if (ret < 0)
goto out_unregister_digest;
-out:
+out:
return ret;
out_unregister_digest:
diff --git a/crypto/deflate.c b/crypto/deflate.c
index 9128da4..463dc85 100644
--- a/crypto/deflate.c
+++ b/crypto/deflate.c
@@ -1,14 +1,14 @@
-/*
+/*
* Cryptographic API.
*
* Deflate algorithm (RFC 1951), implemented here primarily for use
* by IPCOMP (RFC 3173 & RFC 2394).
*
* Copyright (c) 2003 James Morris <jmorris@intercode.com.au>
- *
+ *
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
+ * Software Foundation; either version 2 of the License, or (at your option)
* any later version.
*
* FIXME: deflate transforms will require up to a total of about 436k of kernel
@@ -49,7 +49,7 @@
struct z_stream_s *stream = &ctx->comp_stream;
stream->workspace = vmalloc(zlib_deflate_workspacesize());
- if (!stream->workspace ) {
+ if (!stream->workspace) {
ret = -ENOMEM;
goto out;
}
@@ -61,7 +61,7 @@
ret = -EINVAL;
goto out_free;
}
-out:
+out:
return ret;
out_free:
vfree(stream->workspace);
@@ -74,7 +74,7 @@
struct z_stream_s *stream = &ctx->decomp_stream;
stream->workspace = kzalloc(zlib_inflate_workspacesize(), GFP_KERNEL);
- if (!stream->workspace ) {
+ if (!stream->workspace) {
ret = -ENOMEM;
goto out;
}
@@ -106,7 +106,7 @@
{
struct deflate_ctx *ctx = crypto_tfm_ctx(tfm);
int ret;
-
+
ret = deflate_comp_init(ctx);
if (ret)
goto out;
@@ -153,11 +153,11 @@
out:
return ret;
}
-
+
static int deflate_decompress(struct crypto_tfm *tfm, const u8 *src,
unsigned int slen, u8 *dst, unsigned int *dlen)
{
-
+
int ret = 0;
struct deflate_ctx *dctx = crypto_tfm_ctx(tfm);
struct z_stream_s *stream = &dctx->decomp_stream;
@@ -182,7 +182,7 @@
if (ret == Z_OK && !stream->avail_in && stream->avail_out) {
u8 zerostuff = 0;
stream->next_in = &zerostuff;
- stream->avail_in = 1;
+ stream->avail_in = 1;
ret = zlib_inflate(stream, Z_FINISH);
}
if (ret != Z_STREAM_END) {
diff --git a/crypto/des_generic.c b/crypto/des_generic.c
index 5bd3ee3..249f903 100644
--- a/crypto/des_generic.c
+++ b/crypto/des_generic.c
@@ -869,8 +869,7 @@
if (unlikely(!((K[0] ^ K[2]) | (K[1] ^ K[3])) ||
!((K[2] ^ K[4]) | (K[3] ^ K[5]))) &&
- (*flags & CRYPTO_TFM_REQ_WEAK_KEY))
- {
+ (*flags & CRYPTO_TFM_REQ_WEAK_KEY)) {
*flags |= CRYPTO_TFM_RES_WEAK_KEY;
return -EINVAL;
}
diff --git a/crypto/ecb.c b/crypto/ecb.c
index a46838e..935cfef 100644
--- a/crypto/ecb.c
+++ b/crypto/ecb.c
@@ -55,7 +55,7 @@
do {
fn(crypto_cipher_tfm(tfm), wdst, wsrc);
-
+
wsrc += bsize;
wdst += bsize;
} while ((nbytes -= bsize) >= bsize);
diff --git a/crypto/fcrypt.c b/crypto/fcrypt.c
index b82d61f..c33107e 100644
--- a/crypto/fcrypt.c
+++ b/crypto/fcrypt.c
@@ -60,13 +60,13 @@
u32 t = lo & ((1 << n) - 1); \
lo = (lo >> n) | ((hi & ((1 << n) - 1)) << (32 - n)); \
hi = (hi >> n) | (t << (24-n)); \
-} while(0)
+} while (0)
/* Rotate right one 64 bit number as a 56 bit number */
#define ror56_64(k, n) \
do { \
k = (k >> n) | ((k & ((1 << n) - 1)) << (56 - n)); \
-} while(0)
+} while (0)
/*
* Sboxes for Feistel network derived from
@@ -228,7 +228,7 @@
union lc4 { __be32 l; u8 c[4]; } u; \
u.l = sched ^ R; \
L ^= sbox0[u.c[0]] ^ sbox1[u.c[1]] ^ sbox2[u.c[2]] ^ sbox3[u.c[3]]; \
-} while(0)
+} while (0)
/*
* encryptor
diff --git a/crypto/gcm.c b/crypto/gcm.c
index c654713..2f5fbba 100644
--- a/crypto/gcm.c
+++ b/crypto/gcm.c
@@ -37,6 +37,19 @@
u8 nonce[4];
};
+struct crypto_rfc4543_ctx {
+ struct crypto_aead *child;
+ u8 nonce[4];
+};
+
+struct crypto_rfc4543_req_ctx {
+ u8 auth_tag[16];
+ struct scatterlist cipher[1];
+ struct scatterlist payload[2];
+ struct scatterlist assoc[2];
+ struct aead_request subreq;
+};
+
struct crypto_gcm_ghash_ctx {
unsigned int cryptlen;
struct scatterlist *src;
@@ -1047,6 +1060,272 @@
.module = THIS_MODULE,
};
+static inline struct crypto_rfc4543_req_ctx *crypto_rfc4543_reqctx(
+ struct aead_request *req)
+{
+ unsigned long align = crypto_aead_alignmask(crypto_aead_reqtfm(req));
+
+ return (void *)PTR_ALIGN((u8 *)aead_request_ctx(req), align + 1);
+}
+
+static int crypto_rfc4543_setkey(struct crypto_aead *parent, const u8 *key,
+ unsigned int keylen)
+{
+ struct crypto_rfc4543_ctx *ctx = crypto_aead_ctx(parent);
+ struct crypto_aead *child = ctx->child;
+ int err;
+
+ if (keylen < 4)
+ return -EINVAL;
+
+ keylen -= 4;
+ memcpy(ctx->nonce, key + keylen, 4);
+
+ crypto_aead_clear_flags(child, CRYPTO_TFM_REQ_MASK);
+ crypto_aead_set_flags(child, crypto_aead_get_flags(parent) &
+ CRYPTO_TFM_REQ_MASK);
+ err = crypto_aead_setkey(child, key, keylen);
+ crypto_aead_set_flags(parent, crypto_aead_get_flags(child) &
+ CRYPTO_TFM_RES_MASK);
+
+ return err;
+}
+
+static int crypto_rfc4543_setauthsize(struct crypto_aead *parent,
+ unsigned int authsize)
+{
+ struct crypto_rfc4543_ctx *ctx = crypto_aead_ctx(parent);
+
+ if (authsize != 16)
+ return -EINVAL;
+
+ return crypto_aead_setauthsize(ctx->child, authsize);
+}
+
+/* this is the same as crypto_authenc_chain */
+static void crypto_rfc4543_chain(struct scatterlist *head,
+ struct scatterlist *sg, int chain)
+{
+ if (chain) {
+ head->length += sg->length;
+ sg = scatterwalk_sg_next(sg);
+ }
+
+ if (sg)
+ scatterwalk_sg_chain(head, 2, sg);
+ else
+ sg_mark_end(head);
+}
+
+static struct aead_request *crypto_rfc4543_crypt(struct aead_request *req,
+ int enc)
+{
+ struct crypto_aead *aead = crypto_aead_reqtfm(req);
+ struct crypto_rfc4543_ctx *ctx = crypto_aead_ctx(aead);
+ struct crypto_rfc4543_req_ctx *rctx = crypto_rfc4543_reqctx(req);
+ struct aead_request *subreq = &rctx->subreq;
+ struct scatterlist *dst = req->dst;
+ struct scatterlist *cipher = rctx->cipher;
+ struct scatterlist *payload = rctx->payload;
+ struct scatterlist *assoc = rctx->assoc;
+ unsigned int authsize = crypto_aead_authsize(aead);
+ unsigned int assoclen = req->assoclen;
+ struct page *dstp;
+ u8 *vdst;
+ u8 *iv = PTR_ALIGN((u8 *)(rctx + 1) + crypto_aead_reqsize(ctx->child),
+ crypto_aead_alignmask(ctx->child) + 1);
+
+ memcpy(iv, ctx->nonce, 4);
+ memcpy(iv + 4, req->iv, 8);
+
+ /* construct cipher/plaintext */
+ if (enc)
+ memset(rctx->auth_tag, 0, authsize);
+ else
+ scatterwalk_map_and_copy(rctx->auth_tag, dst,
+ req->cryptlen - authsize,
+ authsize, 0);
+
+ sg_init_one(cipher, rctx->auth_tag, authsize);
+
+ /* construct the aad */
+ dstp = sg_page(dst);
+ vdst = PageHighMem(dstp) ? NULL : page_address(dstp) + dst->offset;
+
+ sg_init_table(payload, 2);
+ sg_set_buf(payload, req->iv, 8);
+ crypto_rfc4543_chain(payload, dst, vdst == req->iv + 8);
+ assoclen += 8 + req->cryptlen - (enc ? 0 : authsize);
+
+ sg_init_table(assoc, 2);
+ sg_set_page(assoc, sg_page(req->assoc), req->assoc->length,
+ req->assoc->offset);
+ crypto_rfc4543_chain(assoc, payload, 0);
+
+ aead_request_set_tfm(subreq, ctx->child);
+ aead_request_set_callback(subreq, req->base.flags, req->base.complete,
+ req->base.data);
+ aead_request_set_crypt(subreq, cipher, cipher, enc ? 0 : authsize, iv);
+ aead_request_set_assoc(subreq, assoc, assoclen);
+
+ return subreq;
+}
+
+static int crypto_rfc4543_encrypt(struct aead_request *req)
+{
+ struct crypto_aead *aead = crypto_aead_reqtfm(req);
+ struct crypto_rfc4543_req_ctx *rctx = crypto_rfc4543_reqctx(req);
+ struct aead_request *subreq;
+ int err;
+
+ subreq = crypto_rfc4543_crypt(req, 1);
+ err = crypto_aead_encrypt(subreq);
+ if (err)
+ return err;
+
+ scatterwalk_map_and_copy(rctx->auth_tag, req->dst, req->cryptlen,
+ crypto_aead_authsize(aead), 1);
+
+ return 0;
+}
+
+static int crypto_rfc4543_decrypt(struct aead_request *req)
+{
+ req = crypto_rfc4543_crypt(req, 0);
+
+ return crypto_aead_decrypt(req);
+}
+
+static int crypto_rfc4543_init_tfm(struct crypto_tfm *tfm)
+{
+ struct crypto_instance *inst = (void *)tfm->__crt_alg;
+ struct crypto_aead_spawn *spawn = crypto_instance_ctx(inst);
+ struct crypto_rfc4543_ctx *ctx = crypto_tfm_ctx(tfm);
+ struct crypto_aead *aead;
+ unsigned long align;
+
+ aead = crypto_spawn_aead(spawn);
+ if (IS_ERR(aead))
+ return PTR_ERR(aead);
+
+ ctx->child = aead;
+
+ align = crypto_aead_alignmask(aead);
+ align &= ~(crypto_tfm_ctx_alignment() - 1);
+ tfm->crt_aead.reqsize = sizeof(struct crypto_rfc4543_req_ctx) +
+ ALIGN(crypto_aead_reqsize(aead),
+ crypto_tfm_ctx_alignment()) +
+ align + 16;
+
+ return 0;
+}
+
+static void crypto_rfc4543_exit_tfm(struct crypto_tfm *tfm)
+{
+ struct crypto_rfc4543_ctx *ctx = crypto_tfm_ctx(tfm);
+
+ crypto_free_aead(ctx->child);
+}
+
+static struct crypto_instance *crypto_rfc4543_alloc(struct rtattr **tb)
+{
+ struct crypto_attr_type *algt;
+ struct crypto_instance *inst;
+ struct crypto_aead_spawn *spawn;
+ struct crypto_alg *alg;
+ const char *ccm_name;
+ int err;
+
+ algt = crypto_get_attr_type(tb);
+ err = PTR_ERR(algt);
+ if (IS_ERR(algt))
+ return ERR_PTR(err);
+
+ if ((algt->type ^ CRYPTO_ALG_TYPE_AEAD) & algt->mask)
+ return ERR_PTR(-EINVAL);
+
+ ccm_name = crypto_attr_alg_name(tb[1]);
+ err = PTR_ERR(ccm_name);
+ if (IS_ERR(ccm_name))
+ return ERR_PTR(err);
+
+ inst = kzalloc(sizeof(*inst) + sizeof(*spawn), GFP_KERNEL);
+ if (!inst)
+ return ERR_PTR(-ENOMEM);
+
+ spawn = crypto_instance_ctx(inst);
+ crypto_set_aead_spawn(spawn, inst);
+ err = crypto_grab_aead(spawn, ccm_name, 0,
+ crypto_requires_sync(algt->type, algt->mask));
+ if (err)
+ goto out_free_inst;
+
+ alg = crypto_aead_spawn_alg(spawn);
+
+ err = -EINVAL;
+
+ /* We only support 16-byte blocks. */
+ if (alg->cra_aead.ivsize != 16)
+ goto out_drop_alg;
+
+ /* Not a stream cipher? */
+ if (alg->cra_blocksize != 1)
+ goto out_drop_alg;
+
+ err = -ENAMETOOLONG;
+ if (snprintf(inst->alg.cra_name, CRYPTO_MAX_ALG_NAME,
+ "rfc4543(%s)", alg->cra_name) >= CRYPTO_MAX_ALG_NAME ||
+ snprintf(inst->alg.cra_driver_name, CRYPTO_MAX_ALG_NAME,
+ "rfc4543(%s)", alg->cra_driver_name) >=
+ CRYPTO_MAX_ALG_NAME)
+ goto out_drop_alg;
+
+ inst->alg.cra_flags = CRYPTO_ALG_TYPE_AEAD;
+ inst->alg.cra_flags |= alg->cra_flags & CRYPTO_ALG_ASYNC;
+ inst->alg.cra_priority = alg->cra_priority;
+ inst->alg.cra_blocksize = 1;
+ inst->alg.cra_alignmask = alg->cra_alignmask;
+ inst->alg.cra_type = &crypto_nivaead_type;
+
+ inst->alg.cra_aead.ivsize = 8;
+ inst->alg.cra_aead.maxauthsize = 16;
+
+ inst->alg.cra_ctxsize = sizeof(struct crypto_rfc4543_ctx);
+
+ inst->alg.cra_init = crypto_rfc4543_init_tfm;
+ inst->alg.cra_exit = crypto_rfc4543_exit_tfm;
+
+ inst->alg.cra_aead.setkey = crypto_rfc4543_setkey;
+ inst->alg.cra_aead.setauthsize = crypto_rfc4543_setauthsize;
+ inst->alg.cra_aead.encrypt = crypto_rfc4543_encrypt;
+ inst->alg.cra_aead.decrypt = crypto_rfc4543_decrypt;
+
+ inst->alg.cra_aead.geniv = "seqiv";
+
+out:
+ return inst;
+
+out_drop_alg:
+ crypto_drop_aead(spawn);
+out_free_inst:
+ kfree(inst);
+ inst = ERR_PTR(err);
+ goto out;
+}
+
+static void crypto_rfc4543_free(struct crypto_instance *inst)
+{
+ crypto_drop_spawn(crypto_instance_ctx(inst));
+ kfree(inst);
+}
+
+static struct crypto_template crypto_rfc4543_tmpl = {
+ .name = "rfc4543",
+ .alloc = crypto_rfc4543_alloc,
+ .free = crypto_rfc4543_free,
+ .module = THIS_MODULE,
+};
+
static int __init crypto_gcm_module_init(void)
{
int err;
@@ -1067,8 +1346,14 @@
if (err)
goto out_undo_gcm;
+ err = crypto_register_template(&crypto_rfc4543_tmpl);
+ if (err)
+ goto out_undo_rfc4106;
+
return 0;
+out_undo_rfc4106:
+ crypto_unregister_template(&crypto_rfc4106_tmpl);
out_undo_gcm:
crypto_unregister_template(&crypto_gcm_tmpl);
out_undo_base:
@@ -1081,6 +1366,7 @@
static void __exit crypto_gcm_module_exit(void)
{
kfree(gcm_zeroes);
+ crypto_unregister_template(&crypto_rfc4543_tmpl);
crypto_unregister_template(&crypto_rfc4106_tmpl);
crypto_unregister_template(&crypto_gcm_tmpl);
crypto_unregister_template(&crypto_gcm_base_tmpl);
@@ -1094,3 +1380,4 @@
MODULE_AUTHOR("Mikko Herranen <mh1@iki.fi>");
MODULE_ALIAS("gcm_base");
MODULE_ALIAS("rfc4106");
+MODULE_ALIAS("rfc4543");
diff --git a/crypto/md5.c b/crypto/md5.c
index 83eb529..9fda213 100644
--- a/crypto/md5.c
+++ b/crypto/md5.c
@@ -16,17 +16,13 @@
*
*/
#include <crypto/internal/hash.h>
+#include <crypto/md5.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/string.h>
#include <linux/types.h>
#include <asm/byteorder.h>
-#define MD5_DIGEST_SIZE 16
-#define MD5_HMAC_BLOCK_SIZE 64
-#define MD5_BLOCK_WORDS 16
-#define MD5_HASH_WORDS 4
-
#define F1(x, y, z) (z ^ (x & (y ^ z)))
#define F2(x, y, z) F1(z, x, y)
#define F3(x, y, z) (x ^ y ^ z)
@@ -35,12 +31,6 @@
#define MD5STEP(f, w, x, y, z, in, s) \
(w += f(x, y, z) + in, w = (w<<s | w>>(32-s)) + x)
-struct md5_ctx {
- u32 hash[MD5_HASH_WORDS];
- u32 block[MD5_BLOCK_WORDS];
- u64 byte_count;
-};
-
static void md5_transform(u32 *hash, u32 const *in)
{
u32 a, b, c, d;
@@ -141,7 +131,7 @@
}
}
-static inline void md5_transform_helper(struct md5_ctx *ctx)
+static inline void md5_transform_helper(struct md5_state *ctx)
{
le32_to_cpu_array(ctx->block, sizeof(ctx->block) / sizeof(u32));
md5_transform(ctx->hash, ctx->block);
@@ -149,7 +139,7 @@
static int md5_init(struct shash_desc *desc)
{
- struct md5_ctx *mctx = shash_desc_ctx(desc);
+ struct md5_state *mctx = shash_desc_ctx(desc);
mctx->hash[0] = 0x67452301;
mctx->hash[1] = 0xefcdab89;
@@ -162,7 +152,7 @@
static int md5_update(struct shash_desc *desc, const u8 *data, unsigned int len)
{
- struct md5_ctx *mctx = shash_desc_ctx(desc);
+ struct md5_state *mctx = shash_desc_ctx(desc);
const u32 avail = sizeof(mctx->block) - (mctx->byte_count & 0x3f);
mctx->byte_count += len;
@@ -194,7 +184,7 @@
static int md5_final(struct shash_desc *desc, u8 *out)
{
- struct md5_ctx *mctx = shash_desc_ctx(desc);
+ struct md5_state *mctx = shash_desc_ctx(desc);
const unsigned int offset = mctx->byte_count & 0x3f;
char *p = (char *)mctx->block + offset;
int padding = 56 - (offset + 1);
@@ -220,12 +210,30 @@
return 0;
}
+static int md5_export(struct shash_desc *desc, void *out)
+{
+ struct md5_state *ctx = shash_desc_ctx(desc);
+
+ memcpy(out, ctx, sizeof(*ctx));
+ return 0;
+}
+
+static int md5_import(struct shash_desc *desc, const void *in)
+{
+ struct md5_state *ctx = shash_desc_ctx(desc);
+
+ memcpy(ctx, in, sizeof(*ctx));
+ return 0;
+}
+
static struct shash_alg alg = {
.digestsize = MD5_DIGEST_SIZE,
.init = md5_init,
.update = md5_update,
.final = md5_final,
- .descsize = sizeof(struct md5_ctx),
+ .export = md5_export,
+ .import = md5_import,
+ .descsize = sizeof(struct md5_state),
.base = {
.cra_name = "md5",
.cra_flags = CRYPTO_ALG_TYPE_SHASH,
diff --git a/crypto/pcrypt.c b/crypto/pcrypt.c
new file mode 100644
index 0000000..8020124
--- /dev/null
+++ b/crypto/pcrypt.c
@@ -0,0 +1,445 @@
+/*
+ * pcrypt - Parallel crypto wrapper.
+ *
+ * Copyright (C) 2009 secunet Security Networks AG
+ * Copyright (C) 2009 Steffen Klassert <steffen.klassert@secunet.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <crypto/algapi.h>
+#include <crypto/internal/aead.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <crypto/pcrypt.h>
+
+static struct padata_instance *pcrypt_enc_padata;
+static struct padata_instance *pcrypt_dec_padata;
+static struct workqueue_struct *encwq;
+static struct workqueue_struct *decwq;
+
+struct pcrypt_instance_ctx {
+ struct crypto_spawn spawn;
+ unsigned int tfm_count;
+};
+
+struct pcrypt_aead_ctx {
+ struct crypto_aead *child;
+ unsigned int cb_cpu;
+};
+
+static int pcrypt_do_parallel(struct padata_priv *padata, unsigned int *cb_cpu,
+ struct padata_instance *pinst)
+{
+ unsigned int cpu_index, cpu, i;
+
+ cpu = *cb_cpu;
+
+ if (cpumask_test_cpu(cpu, cpu_active_mask))
+ goto out;
+
+ cpu_index = cpu % cpumask_weight(cpu_active_mask);
+
+ cpu = cpumask_first(cpu_active_mask);
+ for (i = 0; i < cpu_index; i++)
+ cpu = cpumask_next(cpu, cpu_active_mask);
+
+ *cb_cpu = cpu;
+
+out:
+ return padata_do_parallel(pinst, padata, cpu);
+}
+
+static int pcrypt_aead_setkey(struct crypto_aead *parent,
+ const u8 *key, unsigned int keylen)
+{
+ struct pcrypt_aead_ctx *ctx = crypto_aead_ctx(parent);
+
+ return crypto_aead_setkey(ctx->child, key, keylen);
+}
+
+static int pcrypt_aead_setauthsize(struct crypto_aead *parent,
+ unsigned int authsize)
+{
+ struct pcrypt_aead_ctx *ctx = crypto_aead_ctx(parent);
+
+ return crypto_aead_setauthsize(ctx->child, authsize);
+}
+
+static void pcrypt_aead_serial(struct padata_priv *padata)
+{
+ struct pcrypt_request *preq = pcrypt_padata_request(padata);
+ struct aead_request *req = pcrypt_request_ctx(preq);
+
+ aead_request_complete(req->base.data, padata->info);
+}
+
+static void pcrypt_aead_giv_serial(struct padata_priv *padata)
+{
+ struct pcrypt_request *preq = pcrypt_padata_request(padata);
+ struct aead_givcrypt_request *req = pcrypt_request_ctx(preq);
+
+ aead_request_complete(req->areq.base.data, padata->info);
+}
+
+static void pcrypt_aead_done(struct crypto_async_request *areq, int err)
+{
+ struct aead_request *req = areq->data;
+ struct pcrypt_request *preq = aead_request_ctx(req);
+ struct padata_priv *padata = pcrypt_request_padata(preq);
+
+ padata->info = err;
+ req->base.flags &= ~CRYPTO_TFM_REQ_MAY_SLEEP;
+
+ padata_do_serial(padata);
+}
+
+static void pcrypt_aead_enc(struct padata_priv *padata)
+{
+ struct pcrypt_request *preq = pcrypt_padata_request(padata);
+ struct aead_request *req = pcrypt_request_ctx(preq);
+
+ padata->info = crypto_aead_encrypt(req);
+
+ if (padata->info == -EINPROGRESS)
+ return;
+
+ padata_do_serial(padata);
+}
+
+static int pcrypt_aead_encrypt(struct aead_request *req)
+{
+ int err;
+ struct pcrypt_request *preq = aead_request_ctx(req);
+ struct aead_request *creq = pcrypt_request_ctx(preq);
+ struct padata_priv *padata = pcrypt_request_padata(preq);
+ struct crypto_aead *aead = crypto_aead_reqtfm(req);
+ struct pcrypt_aead_ctx *ctx = crypto_aead_ctx(aead);
+ u32 flags = aead_request_flags(req);
+
+ memset(padata, 0, sizeof(struct padata_priv));
+
+ padata->parallel = pcrypt_aead_enc;
+ padata->serial = pcrypt_aead_serial;
+
+ aead_request_set_tfm(creq, ctx->child);
+ aead_request_set_callback(creq, flags & ~CRYPTO_TFM_REQ_MAY_SLEEP,
+ pcrypt_aead_done, req);
+ aead_request_set_crypt(creq, req->src, req->dst,
+ req->cryptlen, req->iv);
+ aead_request_set_assoc(creq, req->assoc, req->assoclen);
+
+ err = pcrypt_do_parallel(padata, &ctx->cb_cpu, pcrypt_enc_padata);
+ if (err)
+ return err;
+ else
+ err = crypto_aead_encrypt(creq);
+
+ return err;
+}
+
+static void pcrypt_aead_dec(struct padata_priv *padata)
+{
+ struct pcrypt_request *preq = pcrypt_padata_request(padata);
+ struct aead_request *req = pcrypt_request_ctx(preq);
+
+ padata->info = crypto_aead_decrypt(req);
+
+ if (padata->info == -EINPROGRESS)
+ return;
+
+ padata_do_serial(padata);
+}
+
+static int pcrypt_aead_decrypt(struct aead_request *req)
+{
+ int err;
+ struct pcrypt_request *preq = aead_request_ctx(req);
+ struct aead_request *creq = pcrypt_request_ctx(preq);
+ struct padata_priv *padata = pcrypt_request_padata(preq);
+ struct crypto_aead *aead = crypto_aead_reqtfm(req);
+ struct pcrypt_aead_ctx *ctx = crypto_aead_ctx(aead);
+ u32 flags = aead_request_flags(req);
+
+ memset(padata, 0, sizeof(struct padata_priv));
+
+ padata->parallel = pcrypt_aead_dec;
+ padata->serial = pcrypt_aead_serial;
+
+ aead_request_set_tfm(creq, ctx->child);
+ aead_request_set_callback(creq, flags & ~CRYPTO_TFM_REQ_MAY_SLEEP,
+ pcrypt_aead_done, req);
+ aead_request_set_crypt(creq, req->src, req->dst,
+ req->cryptlen, req->iv);
+ aead_request_set_assoc(creq, req->assoc, req->assoclen);
+
+ err = pcrypt_do_parallel(padata, &ctx->cb_cpu, pcrypt_dec_padata);
+ if (err)
+ return err;
+ else
+ err = crypto_aead_decrypt(creq);
+
+ return err;
+}
+
+static void pcrypt_aead_givenc(struct padata_priv *padata)
+{
+ struct pcrypt_request *preq = pcrypt_padata_request(padata);
+ struct aead_givcrypt_request *req = pcrypt_request_ctx(preq);
+
+ padata->info = crypto_aead_givencrypt(req);
+
+ if (padata->info == -EINPROGRESS)
+ return;
+
+ padata_do_serial(padata);
+}
+
+static int pcrypt_aead_givencrypt(struct aead_givcrypt_request *req)
+{
+ int err;
+ struct aead_request *areq = &req->areq;
+ struct pcrypt_request *preq = aead_request_ctx(areq);
+ struct aead_givcrypt_request *creq = pcrypt_request_ctx(preq);
+ struct padata_priv *padata = pcrypt_request_padata(preq);
+ struct crypto_aead *aead = aead_givcrypt_reqtfm(req);
+ struct pcrypt_aead_ctx *ctx = crypto_aead_ctx(aead);
+ u32 flags = aead_request_flags(areq);
+
+ memset(padata, 0, sizeof(struct padata_priv));
+
+ padata->parallel = pcrypt_aead_givenc;
+ padata->serial = pcrypt_aead_giv_serial;
+
+ aead_givcrypt_set_tfm(creq, ctx->child);
+ aead_givcrypt_set_callback(creq, flags & ~CRYPTO_TFM_REQ_MAY_SLEEP,
+ pcrypt_aead_done, areq);
+ aead_givcrypt_set_crypt(creq, areq->src, areq->dst,
+ areq->cryptlen, areq->iv);
+ aead_givcrypt_set_assoc(creq, areq->assoc, areq->assoclen);
+ aead_givcrypt_set_giv(creq, req->giv, req->seq);
+
+ err = pcrypt_do_parallel(padata, &ctx->cb_cpu, pcrypt_enc_padata);
+ if (err)
+ return err;
+ else
+ err = crypto_aead_givencrypt(creq);
+
+ return err;
+}
+
+static int pcrypt_aead_init_tfm(struct crypto_tfm *tfm)
+{
+ int cpu, cpu_index;
+ struct crypto_instance *inst = crypto_tfm_alg_instance(tfm);
+ struct pcrypt_instance_ctx *ictx = crypto_instance_ctx(inst);
+ struct pcrypt_aead_ctx *ctx = crypto_tfm_ctx(tfm);
+ struct crypto_aead *cipher;
+
+ ictx->tfm_count++;
+
+ cpu_index = ictx->tfm_count % cpumask_weight(cpu_active_mask);
+
+ ctx->cb_cpu = cpumask_first(cpu_active_mask);
+ for (cpu = 0; cpu < cpu_index; cpu++)
+ ctx->cb_cpu = cpumask_next(ctx->cb_cpu, cpu_active_mask);
+
+ cipher = crypto_spawn_aead(crypto_instance_ctx(inst));
+
+ if (IS_ERR(cipher))
+ return PTR_ERR(cipher);
+
+ ctx->child = cipher;
+ tfm->crt_aead.reqsize = sizeof(struct pcrypt_request)
+ + sizeof(struct aead_givcrypt_request)
+ + crypto_aead_reqsize(cipher);
+
+ return 0;
+}
+
+static void pcrypt_aead_exit_tfm(struct crypto_tfm *tfm)
+{
+ struct pcrypt_aead_ctx *ctx = crypto_tfm_ctx(tfm);
+
+ crypto_free_aead(ctx->child);
+}
+
+static struct crypto_instance *pcrypt_alloc_instance(struct crypto_alg *alg)
+{
+ struct crypto_instance *inst;
+ struct pcrypt_instance_ctx *ctx;
+ int err;
+
+ inst = kzalloc(sizeof(*inst) + sizeof(*ctx), GFP_KERNEL);
+ if (!inst) {
+ inst = ERR_PTR(-ENOMEM);
+ goto out;
+ }
+
+ err = -ENAMETOOLONG;
+ if (snprintf(inst->alg.cra_driver_name, CRYPTO_MAX_ALG_NAME,
+ "pcrypt(%s)", alg->cra_driver_name) >= CRYPTO_MAX_ALG_NAME)
+ goto out_free_inst;
+
+ memcpy(inst->alg.cra_name, alg->cra_name, CRYPTO_MAX_ALG_NAME);
+
+ ctx = crypto_instance_ctx(inst);
+ err = crypto_init_spawn(&ctx->spawn, alg, inst,
+ CRYPTO_ALG_TYPE_MASK);
+ if (err)
+ goto out_free_inst;
+
+ inst->alg.cra_priority = alg->cra_priority + 100;
+ inst->alg.cra_blocksize = alg->cra_blocksize;
+ inst->alg.cra_alignmask = alg->cra_alignmask;
+
+out:
+ return inst;
+
+out_free_inst:
+ kfree(inst);
+ inst = ERR_PTR(err);
+ goto out;
+}
+
+static struct crypto_instance *pcrypt_alloc_aead(struct rtattr **tb)
+{
+ struct crypto_instance *inst;
+ struct crypto_alg *alg;
+ struct crypto_attr_type *algt;
+
+ algt = crypto_get_attr_type(tb);
+
+ alg = crypto_get_attr_alg(tb, algt->type,
+ (algt->mask & CRYPTO_ALG_TYPE_MASK));
+ if (IS_ERR(alg))
+ return ERR_CAST(alg);
+
+ inst = pcrypt_alloc_instance(alg);
+ if (IS_ERR(inst))
+ goto out_put_alg;
+
+ inst->alg.cra_flags = CRYPTO_ALG_TYPE_AEAD | CRYPTO_ALG_ASYNC;
+ inst->alg.cra_type = &crypto_aead_type;
+
+ inst->alg.cra_aead.ivsize = alg->cra_aead.ivsize;
+ inst->alg.cra_aead.geniv = alg->cra_aead.geniv;
+ inst->alg.cra_aead.maxauthsize = alg->cra_aead.maxauthsize;
+
+ inst->alg.cra_ctxsize = sizeof(struct pcrypt_aead_ctx);
+
+ inst->alg.cra_init = pcrypt_aead_init_tfm;
+ inst->alg.cra_exit = pcrypt_aead_exit_tfm;
+
+ inst->alg.cra_aead.setkey = pcrypt_aead_setkey;
+ inst->alg.cra_aead.setauthsize = pcrypt_aead_setauthsize;
+ inst->alg.cra_aead.encrypt = pcrypt_aead_encrypt;
+ inst->alg.cra_aead.decrypt = pcrypt_aead_decrypt;
+ inst->alg.cra_aead.givencrypt = pcrypt_aead_givencrypt;
+
+out_put_alg:
+ crypto_mod_put(alg);
+ return inst;
+}
+
+static struct crypto_instance *pcrypt_alloc(struct rtattr **tb)
+{
+ struct crypto_attr_type *algt;
+
+ algt = crypto_get_attr_type(tb);
+ if (IS_ERR(algt))
+ return ERR_CAST(algt);
+
+ switch (algt->type & algt->mask & CRYPTO_ALG_TYPE_MASK) {
+ case CRYPTO_ALG_TYPE_AEAD:
+ return pcrypt_alloc_aead(tb);
+ }
+
+ return ERR_PTR(-EINVAL);
+}
+
+static void pcrypt_free(struct crypto_instance *inst)
+{
+ struct pcrypt_instance_ctx *ctx = crypto_instance_ctx(inst);
+
+ crypto_drop_spawn(&ctx->spawn);
+ kfree(inst);
+}
+
+static struct crypto_template pcrypt_tmpl = {
+ .name = "pcrypt",
+ .alloc = pcrypt_alloc,
+ .free = pcrypt_free,
+ .module = THIS_MODULE,
+};
+
+static int __init pcrypt_init(void)
+{
+ encwq = create_workqueue("pencrypt");
+ if (!encwq)
+ goto err;
+
+ decwq = create_workqueue("pdecrypt");
+ if (!decwq)
+ goto err_destroy_encwq;
+
+
+ pcrypt_enc_padata = padata_alloc(cpu_possible_mask, encwq);
+ if (!pcrypt_enc_padata)
+ goto err_destroy_decwq;
+
+ pcrypt_dec_padata = padata_alloc(cpu_possible_mask, decwq);
+ if (!pcrypt_dec_padata)
+ goto err_free_padata;
+
+ padata_start(pcrypt_enc_padata);
+ padata_start(pcrypt_dec_padata);
+
+ return crypto_register_template(&pcrypt_tmpl);
+
+err_free_padata:
+ padata_free(pcrypt_enc_padata);
+
+err_destroy_decwq:
+ destroy_workqueue(decwq);
+
+err_destroy_encwq:
+ destroy_workqueue(encwq);
+
+err:
+ return -ENOMEM;
+}
+
+static void __exit pcrypt_exit(void)
+{
+ padata_stop(pcrypt_enc_padata);
+ padata_stop(pcrypt_dec_padata);
+
+ destroy_workqueue(encwq);
+ destroy_workqueue(decwq);
+
+ padata_free(pcrypt_enc_padata);
+ padata_free(pcrypt_dec_padata);
+
+ crypto_unregister_template(&pcrypt_tmpl);
+}
+
+module_init(pcrypt_init);
+module_exit(pcrypt_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Steffen Klassert <steffen.klassert@secunet.com>");
+MODULE_DESCRIPTION("Parallel crypto wrapper");
diff --git a/crypto/testmgr.c b/crypto/testmgr.c
index 7620bfc..c494d76 100644
--- a/crypto/testmgr.c
+++ b/crypto/testmgr.c
@@ -1477,9 +1477,54 @@
return err;
}
+static int alg_test_null(const struct alg_test_desc *desc,
+ const char *driver, u32 type, u32 mask)
+{
+ return 0;
+}
+
/* Please keep this list sorted by algorithm name. */
static const struct alg_test_desc alg_test_descs[] = {
{
+ .alg = "__driver-cbc-aes-aesni",
+ .test = alg_test_null,
+ .suite = {
+ .cipher = {
+ .enc = {
+ .vecs = NULL,
+ .count = 0
+ },
+ .dec = {
+ .vecs = NULL,
+ .count = 0
+ }
+ }
+ }
+ }, {
+ .alg = "__driver-ecb-aes-aesni",
+ .test = alg_test_null,
+ .suite = {
+ .cipher = {
+ .enc = {
+ .vecs = NULL,
+ .count = 0
+ },
+ .dec = {
+ .vecs = NULL,
+ .count = 0
+ }
+ }
+ }
+ }, {
+ .alg = "__ghash-pclmulqdqni",
+ .test = alg_test_null,
+ .suite = {
+ .hash = {
+ .vecs = NULL,
+ .count = 0
+ }
+ }
+ }, {
.alg = "ansi_cprng",
.test = alg_test_cprng,
.fips_allowed = 1,
@@ -1623,6 +1668,30 @@
}
}
}, {
+ .alg = "cryptd(__driver-ecb-aes-aesni)",
+ .test = alg_test_null,
+ .suite = {
+ .cipher = {
+ .enc = {
+ .vecs = NULL,
+ .count = 0
+ },
+ .dec = {
+ .vecs = NULL,
+ .count = 0
+ }
+ }
+ }
+ }, {
+ .alg = "cryptd(__ghash-pclmulqdqni)",
+ .test = alg_test_null,
+ .suite = {
+ .hash = {
+ .vecs = NULL,
+ .count = 0
+ }
+ }
+ }, {
.alg = "ctr(aes)",
.test = alg_test_skcipher,
.fips_allowed = 1,
@@ -1669,6 +1738,21 @@
}
}
}, {
+ .alg = "ecb(__aes-aesni)",
+ .test = alg_test_null,
+ .suite = {
+ .cipher = {
+ .enc = {
+ .vecs = NULL,
+ .count = 0
+ },
+ .dec = {
+ .vecs = NULL,
+ .count = 0
+ }
+ }
+ }
+ }, {
.alg = "ecb(aes)",
.test = alg_test_skcipher,
.fips_allowed = 1,
diff --git a/drivers/acpi/acpica/acevents.h b/drivers/acpi/acpica/acevents.h
index 0bba148..4ced54f 100644
--- a/drivers/acpi/acpica/acevents.h
+++ b/drivers/acpi/acpica/acevents.h
@@ -76,12 +76,9 @@
* evgpe - GPE handling and dispatch
*/
acpi_status
-acpi_ev_update_gpe_enable_masks(struct acpi_gpe_event_info *gpe_event_info,
- u8 type);
+acpi_ev_update_gpe_enable_masks(struct acpi_gpe_event_info *gpe_event_info);
-acpi_status
-acpi_ev_enable_gpe(struct acpi_gpe_event_info *gpe_event_info,
- u8 write_to_hardware);
+acpi_status acpi_ev_enable_gpe(struct acpi_gpe_event_info *gpe_event_info);
acpi_status acpi_ev_disable_gpe(struct acpi_gpe_event_info *gpe_event_info);
@@ -122,9 +119,6 @@
u32 acpi_ev_gpe_detect(struct acpi_gpe_xrupt_info *gpe_xrupt_list);
acpi_status
-acpi_ev_set_gpe_type(struct acpi_gpe_event_info *gpe_event_info, u8 type);
-
-acpi_status
acpi_ev_check_for_wake_only_gpe(struct acpi_gpe_event_info *gpe_event_info);
acpi_status acpi_ev_gpe_initialize(void);
diff --git a/drivers/acpi/acpica/aclocal.h b/drivers/acpi/acpica/aclocal.h
index 81e64f47..13cb80c 100644
--- a/drivers/acpi/acpica/aclocal.h
+++ b/drivers/acpi/acpica/aclocal.h
@@ -426,6 +426,8 @@
struct acpi_gpe_register_info *register_info; /* Backpointer to register info */
u8 flags; /* Misc info about this GPE */
u8 gpe_number; /* This GPE */
+ u8 runtime_count;
+ u8 wakeup_count;
};
/* Information about a GPE register pair, one per each status/enable pair in an array */
diff --git a/drivers/acpi/acpica/acobject.h b/drivers/acpi/acpica/acobject.h
index 64062b1..07f6e2e 100644
--- a/drivers/acpi/acpica/acobject.h
+++ b/drivers/acpi/acpica/acobject.h
@@ -287,8 +287,10 @@
struct acpi_object_notify_handler {
ACPI_OBJECT_COMMON_HEADER struct acpi_namespace_node *node; /* Parent device */
+ u32 handler_type;
acpi_notify_handler handler;
void *context;
+ struct acpi_object_notify_handler *next;
};
struct acpi_object_addr_handler {
diff --git a/drivers/acpi/acpica/evgpe.c b/drivers/acpi/acpica/evgpe.c
index afacf44..0b45346 100644
--- a/drivers/acpi/acpica/evgpe.c
+++ b/drivers/acpi/acpica/evgpe.c
@@ -54,54 +54,9 @@
/*******************************************************************************
*
- * FUNCTION: acpi_ev_set_gpe_type
- *
- * PARAMETERS: gpe_event_info - GPE to set
- * Type - New type
- *
- * RETURN: Status
- *
- * DESCRIPTION: Sets the new type for the GPE (wake, run, or wake/run)
- *
- ******************************************************************************/
-
-acpi_status
-acpi_ev_set_gpe_type(struct acpi_gpe_event_info *gpe_event_info, u8 type)
-{
- acpi_status status;
-
- ACPI_FUNCTION_TRACE(ev_set_gpe_type);
-
- /* Validate type and update register enable masks */
-
- switch (type) {
- case ACPI_GPE_TYPE_WAKE:
- case ACPI_GPE_TYPE_RUNTIME:
- case ACPI_GPE_TYPE_WAKE_RUN:
- break;
-
- default:
- return_ACPI_STATUS(AE_BAD_PARAMETER);
- }
-
- /* Disable the GPE if currently enabled */
-
- status = acpi_ev_disable_gpe(gpe_event_info);
-
- /* Clear the type bits and insert the new Type */
-
- gpe_event_info->flags &= ~ACPI_GPE_TYPE_MASK;
- gpe_event_info->flags |= type;
- return_ACPI_STATUS(status);
-}
-
-/*******************************************************************************
- *
* FUNCTION: acpi_ev_update_gpe_enable_masks
*
* PARAMETERS: gpe_event_info - GPE to update
- * Type - What to do: ACPI_GPE_DISABLE or
- * ACPI_GPE_ENABLE
*
* RETURN: Status
*
@@ -110,8 +65,7 @@
******************************************************************************/
acpi_status
-acpi_ev_update_gpe_enable_masks(struct acpi_gpe_event_info *gpe_event_info,
- u8 type)
+acpi_ev_update_gpe_enable_masks(struct acpi_gpe_event_info *gpe_event_info)
{
struct acpi_gpe_register_info *gpe_register_info;
u8 register_bit;
@@ -127,37 +81,14 @@
(1 <<
(gpe_event_info->gpe_number - gpe_register_info->base_gpe_number));
- /* 1) Disable case. Simply clear all enable bits */
+ ACPI_CLEAR_BIT(gpe_register_info->enable_for_wake, register_bit);
+ ACPI_CLEAR_BIT(gpe_register_info->enable_for_run, register_bit);
- if (type == ACPI_GPE_DISABLE) {
- ACPI_CLEAR_BIT(gpe_register_info->enable_for_wake,
- register_bit);
- ACPI_CLEAR_BIT(gpe_register_info->enable_for_run, register_bit);
- return_ACPI_STATUS(AE_OK);
- }
-
- /* 2) Enable case. Set/Clear the appropriate enable bits */
-
- switch (gpe_event_info->flags & ACPI_GPE_TYPE_MASK) {
- case ACPI_GPE_TYPE_WAKE:
- ACPI_SET_BIT(gpe_register_info->enable_for_wake, register_bit);
- ACPI_CLEAR_BIT(gpe_register_info->enable_for_run, register_bit);
- break;
-
- case ACPI_GPE_TYPE_RUNTIME:
- ACPI_CLEAR_BIT(gpe_register_info->enable_for_wake,
- register_bit);
+ if (gpe_event_info->runtime_count)
ACPI_SET_BIT(gpe_register_info->enable_for_run, register_bit);
- break;
- case ACPI_GPE_TYPE_WAKE_RUN:
+ if (gpe_event_info->wakeup_count)
ACPI_SET_BIT(gpe_register_info->enable_for_wake, register_bit);
- ACPI_SET_BIT(gpe_register_info->enable_for_run, register_bit);
- break;
-
- default:
- return_ACPI_STATUS(AE_BAD_PARAMETER);
- }
return_ACPI_STATUS(AE_OK);
}
@@ -167,8 +98,6 @@
* FUNCTION: acpi_ev_enable_gpe
*
* PARAMETERS: gpe_event_info - GPE to enable
- * write_to_hardware - Enable now, or just mark data structs
- * (WAKE GPEs should be deferred)
*
* RETURN: Status
*
@@ -176,9 +105,7 @@
*
******************************************************************************/
-acpi_status
-acpi_ev_enable_gpe(struct acpi_gpe_event_info *gpe_event_info,
- u8 write_to_hardware)
+acpi_status acpi_ev_enable_gpe(struct acpi_gpe_event_info *gpe_event_info)
{
acpi_status status;
@@ -186,47 +113,20 @@
/* Make sure HW enable masks are updated */
- status =
- acpi_ev_update_gpe_enable_masks(gpe_event_info, ACPI_GPE_ENABLE);
- if (ACPI_FAILURE(status)) {
+ status = acpi_ev_update_gpe_enable_masks(gpe_event_info);
+ if (ACPI_FAILURE(status))
return_ACPI_STATUS(status);
- }
/* Mark wake-enabled or HW enable, or both */
- switch (gpe_event_info->flags & ACPI_GPE_TYPE_MASK) {
- case ACPI_GPE_TYPE_WAKE:
+ if (gpe_event_info->runtime_count) {
+ /* Clear the GPE (of stale events), then enable it */
+ status = acpi_hw_clear_gpe(gpe_event_info);
+ if (ACPI_FAILURE(status))
+ return_ACPI_STATUS(status);
- ACPI_SET_BIT(gpe_event_info->flags, ACPI_GPE_WAKE_ENABLED);
- break;
-
- case ACPI_GPE_TYPE_WAKE_RUN:
-
- ACPI_SET_BIT(gpe_event_info->flags, ACPI_GPE_WAKE_ENABLED);
-
- /*lint -fallthrough */
-
- case ACPI_GPE_TYPE_RUNTIME:
-
- ACPI_SET_BIT(gpe_event_info->flags, ACPI_GPE_RUN_ENABLED);
-
- if (write_to_hardware) {
-
- /* Clear the GPE (of stale events), then enable it */
-
- status = acpi_hw_clear_gpe(gpe_event_info);
- if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
- }
-
- /* Enable the requested runtime GPE */
-
- status = acpi_hw_write_gpe_enable_reg(gpe_event_info);
- }
- break;
-
- default:
- return_ACPI_STATUS(AE_BAD_PARAMETER);
+ /* Enable the requested runtime GPE */
+ status = acpi_hw_write_gpe_enable_reg(gpe_event_info);
}
return_ACPI_STATUS(AE_OK);
@@ -252,34 +152,9 @@
/* Make sure HW enable masks are updated */
- status =
- acpi_ev_update_gpe_enable_masks(gpe_event_info, ACPI_GPE_DISABLE);
- if (ACPI_FAILURE(status)) {
+ status = acpi_ev_update_gpe_enable_masks(gpe_event_info);
+ if (ACPI_FAILURE(status))
return_ACPI_STATUS(status);
- }
-
- /* Clear the appropriate enabled flags for this GPE */
-
- switch (gpe_event_info->flags & ACPI_GPE_TYPE_MASK) {
- case ACPI_GPE_TYPE_WAKE:
- ACPI_CLEAR_BIT(gpe_event_info->flags, ACPI_GPE_WAKE_ENABLED);
- break;
-
- case ACPI_GPE_TYPE_WAKE_RUN:
- ACPI_CLEAR_BIT(gpe_event_info->flags, ACPI_GPE_WAKE_ENABLED);
-
- /* fallthrough */
-
- case ACPI_GPE_TYPE_RUNTIME:
-
- /* Disable the requested runtime GPE */
-
- ACPI_CLEAR_BIT(gpe_event_info->flags, ACPI_GPE_RUN_ENABLED);
- break;
-
- default:
- break;
- }
/*
* Even if we don't know the GPE type, make sure that we always
@@ -521,7 +396,7 @@
/* Set the GPE flags for return to enabled state */
- (void)acpi_ev_enable_gpe(gpe_event_info, FALSE);
+ (void)acpi_ev_update_gpe_enable_masks(gpe_event_info);
/*
* Take a snapshot of the GPE info for this level - we copy the info to
diff --git a/drivers/acpi/acpica/evgpeblk.c b/drivers/acpi/acpica/evgpeblk.c
index 2479209..3d4c4ac 100644
--- a/drivers/acpi/acpica/evgpeblk.c
+++ b/drivers/acpi/acpica/evgpeblk.c
@@ -258,7 +258,6 @@
u32 gpe_number;
char name[ACPI_NAME_SIZE + 1];
u8 type;
- acpi_status status;
ACPI_FUNCTION_TRACE(ev_save_method_info);
@@ -325,26 +324,20 @@
/*
* Now we can add this information to the gpe_event_info block for use
- * during dispatch of this GPE. Default type is RUNTIME, although this may
- * change when the _PRW methods are executed later.
+ * during dispatch of this GPE.
*/
gpe_event_info =
&gpe_block->event_info[gpe_number - gpe_block->block_base_number];
- gpe_event_info->flags = (u8)
- (type | ACPI_GPE_DISPATCH_METHOD | ACPI_GPE_TYPE_RUNTIME);
+ gpe_event_info->flags = (u8) (type | ACPI_GPE_DISPATCH_METHOD);
gpe_event_info->dispatch.method_node =
(struct acpi_namespace_node *)obj_handle;
- /* Update enable mask, but don't enable the HW GPE as of yet */
-
- status = acpi_ev_enable_gpe(gpe_event_info, FALSE);
-
ACPI_DEBUG_PRINT((ACPI_DB_LOAD,
"Registered GPE method %s as GPE number 0x%.2X\n",
name, gpe_number));
- return_ACPI_STATUS(status);
+ return_ACPI_STATUS(AE_OK);
}
/*******************************************************************************
@@ -454,20 +447,7 @@
gpe_block->
block_base_number];
- /* Mark GPE for WAKE-ONLY but WAKE_DISABLED */
-
- gpe_event_info->flags &=
- ~(ACPI_GPE_WAKE_ENABLED | ACPI_GPE_RUN_ENABLED);
-
- status =
- acpi_ev_set_gpe_type(gpe_event_info, ACPI_GPE_TYPE_WAKE);
- if (ACPI_FAILURE(status)) {
- goto cleanup;
- }
-
- status =
- acpi_ev_update_gpe_enable_masks(gpe_event_info,
- ACPI_GPE_DISABLE);
+ gpe_event_info->flags |= ACPI_GPE_CAN_WAKE;
}
cleanup:
@@ -989,7 +969,6 @@
acpi_ev_initialize_gpe_block(struct acpi_namespace_node *gpe_device,
struct acpi_gpe_block_info *gpe_block)
{
- acpi_status status;
struct acpi_gpe_event_info *gpe_event_info;
struct acpi_gpe_walk_info gpe_info;
u32 wake_gpe_count;
@@ -1019,42 +998,50 @@
gpe_info.gpe_block = gpe_block;
gpe_info.gpe_device = gpe_device;
- status =
- acpi_ns_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
+ acpi_ns_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
ACPI_UINT32_MAX, ACPI_NS_WALK_UNLOCK,
acpi_ev_match_prw_and_gpe, NULL,
&gpe_info, NULL);
}
/*
- * Enable all GPEs in this block that have these attributes:
- * 1) are "runtime" or "run/wake" GPEs, and
- * 2) have a corresponding _Lxx or _Exx method
- *
- * Any other GPEs within this block must be enabled via the
- * acpi_enable_gpe() external interface.
+ * Enable all GPEs that have a corresponding method and aren't
+ * capable of generating wakeups. Any other GPEs within this block
+ * must be enabled via the acpi_enable_gpe() interface.
*/
wake_gpe_count = 0;
gpe_enabled_count = 0;
+ if (gpe_device == acpi_gbl_fadt_gpe_device)
+ gpe_device = NULL;
for (i = 0; i < gpe_block->register_count; i++) {
- for (j = 0; j < 8; j++) {
+ for (j = 0; j < ACPI_GPE_REGISTER_WIDTH; j++) {
+ acpi_status status;
+ acpi_size gpe_index;
+ int gpe_number;
/* Get the info block for this particular GPE */
+ gpe_index = (acpi_size)i * ACPI_GPE_REGISTER_WIDTH + j;
+ gpe_event_info = &gpe_block->event_info[gpe_index];
- gpe_event_info = &gpe_block->event_info[((acpi_size) i *
- ACPI_GPE_REGISTER_WIDTH)
- + j];
-
- if (((gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) ==
- ACPI_GPE_DISPATCH_METHOD) &&
- (gpe_event_info->flags & ACPI_GPE_TYPE_RUNTIME)) {
- gpe_enabled_count++;
- }
-
- if (gpe_event_info->flags & ACPI_GPE_TYPE_WAKE) {
+ if (gpe_event_info->flags & ACPI_GPE_CAN_WAKE) {
wake_gpe_count++;
+ if (acpi_gbl_leave_wake_gpes_disabled)
+ continue;
}
+
+ if (!(gpe_event_info->flags & ACPI_GPE_DISPATCH_METHOD))
+ continue;
+
+ gpe_number = gpe_index + gpe_block->block_base_number;
+ status = acpi_enable_gpe(gpe_device, gpe_number,
+ ACPI_GPE_TYPE_RUNTIME);
+ if (ACPI_FAILURE(status))
+ ACPI_ERROR((AE_INFO,
+ "Failed to enable GPE %02X\n",
+ gpe_number));
+ else
+ gpe_enabled_count++;
}
}
@@ -1062,15 +1049,7 @@
"Found %u Wake, Enabled %u Runtime GPEs in this block\n",
wake_gpe_count, gpe_enabled_count));
- /* Enable all valid runtime GPEs found above */
-
- status = acpi_hw_enable_runtime_gpe_block(NULL, gpe_block, NULL);
- if (ACPI_FAILURE(status)) {
- ACPI_ERROR((AE_INFO, "Could not enable GPEs in GpeBlock %p",
- gpe_block));
- }
-
- return_ACPI_STATUS(status);
+ return_ACPI_STATUS(AE_OK);
}
/*******************************************************************************
diff --git a/drivers/acpi/acpica/evmisc.c b/drivers/acpi/acpica/evmisc.c
index ce224e1..8f0fac6 100644
--- a/drivers/acpi/acpica/evmisc.c
+++ b/drivers/acpi/acpica/evmisc.c
@@ -259,9 +259,15 @@
handler_obj = notify_info->notify.handler_obj;
if (handler_obj) {
- handler_obj->notify.handler(notify_info->notify.node,
- notify_info->notify.value,
- handler_obj->notify.context);
+ struct acpi_object_notify_handler *notifier;
+
+ notifier = &handler_obj->notify;
+ while (notifier) {
+ notifier->handler(notify_info->notify.node,
+ notify_info->notify.value,
+ notifier->context);
+ notifier = notifier->next;
+ }
}
/* All done with the info object */
diff --git a/drivers/acpi/acpica/evxface.c b/drivers/acpi/acpica/evxface.c
index 2fe0809..474e2ca 100644
--- a/drivers/acpi/acpica/evxface.c
+++ b/drivers/acpi/acpica/evxface.c
@@ -218,6 +218,72 @@
/*******************************************************************************
*
+ * FUNCTION: acpi_populate_handler_object
+ *
+ * PARAMETERS: handler_obj - Handler object to populate
+ * handler_type - The type of handler:
+ * ACPI_SYSTEM_NOTIFY: system_handler (00-7f)
+ * ACPI_DEVICE_NOTIFY: driver_handler (80-ff)
+ * ACPI_ALL_NOTIFY: both system and device
+ * handler - Address of the handler
+ * context - Value passed to the handler on each GPE
+ * next - Address of a handler object to link to
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Populate a handler object.
+ *
+ ******************************************************************************/
+static void
+acpi_populate_handler_object(struct acpi_object_notify_handler *handler_obj,
+ u32 handler_type,
+ acpi_notify_handler handler, void *context,
+ struct acpi_object_notify_handler *next)
+{
+ handler_obj->handler_type = handler_type;
+ handler_obj->handler = handler;
+ handler_obj->context = context;
+ handler_obj->next = next;
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_add_handler_object
+ *
+ * PARAMETERS: parent_obj - Parent of the new object
+ * handler - Address of the handler
+ * context - Value passed to the handler on each GPE
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Create a new handler object and populate it.
+ *
+ ******************************************************************************/
+static acpi_status
+acpi_add_handler_object(struct acpi_object_notify_handler *parent_obj,
+ acpi_notify_handler handler, void *context)
+{
+ struct acpi_object_notify_handler *handler_obj;
+
+ /* The parent must not be a defice notify handler object. */
+ if (parent_obj->handler_type & ACPI_DEVICE_NOTIFY)
+ return AE_BAD_PARAMETER;
+
+ handler_obj = ACPI_ALLOCATE_ZEROED(sizeof(*handler_obj));
+ if (!handler_obj)
+ return AE_NO_MEMORY;
+
+ acpi_populate_handler_object(handler_obj,
+ ACPI_SYSTEM_NOTIFY,
+ handler, context,
+ parent_obj->next);
+ parent_obj->next = handler_obj;
+
+ return AE_OK;
+}
+
+/*******************************************************************************
+ *
* FUNCTION: acpi_install_notify_handler
*
* PARAMETERS: Device - The device for which notifies will be handled
@@ -316,15 +382,32 @@
obj_desc = acpi_ns_get_attached_object(node);
if (obj_desc) {
- /* Object exists - make sure there's no handler */
+ /* Object exists. */
- if (((handler_type & ACPI_SYSTEM_NOTIFY) &&
- obj_desc->common_notify.system_notify) ||
- ((handler_type & ACPI_DEVICE_NOTIFY) &&
- obj_desc->common_notify.device_notify)) {
+ /* For a device notify, make sure there's no handler. */
+ if ((handler_type & ACPI_DEVICE_NOTIFY) &&
+ obj_desc->common_notify.device_notify) {
status = AE_ALREADY_EXISTS;
goto unlock_and_exit;
}
+
+ /* System notifies may have more handlers installed. */
+ notify_obj = obj_desc->common_notify.system_notify;
+
+ if ((handler_type & ACPI_SYSTEM_NOTIFY) && notify_obj) {
+ struct acpi_object_notify_handler *parent_obj;
+
+ if (handler_type & ACPI_DEVICE_NOTIFY) {
+ status = AE_ALREADY_EXISTS;
+ goto unlock_and_exit;
+ }
+
+ parent_obj = ¬ify_obj->notify;
+ status = acpi_add_handler_object(parent_obj,
+ handler,
+ context);
+ goto unlock_and_exit;
+ }
} else {
/* Create a new object */
@@ -356,9 +439,10 @@
goto unlock_and_exit;
}
- notify_obj->notify.node = node;
- notify_obj->notify.handler = handler;
- notify_obj->notify.context = context;
+ acpi_populate_handler_object(¬ify_obj->notify,
+ handler_type,
+ handler, context,
+ NULL);
if (handler_type & ACPI_SYSTEM_NOTIFY) {
obj_desc->common_notify.system_notify = notify_obj;
@@ -418,6 +502,10 @@
goto exit;
}
+
+ /* Make sure all deferred tasks are completed */
+ acpi_os_wait_events_complete(NULL);
+
status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
if (ACPI_FAILURE(status)) {
goto exit;
@@ -445,15 +533,6 @@
goto unlock_and_exit;
}
- /* Make sure all deferred tasks are completed */
-
- (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
- acpi_os_wait_events_complete(NULL);
- status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
- if (ACPI_FAILURE(status)) {
- goto exit;
- }
-
if (handler_type & ACPI_SYSTEM_NOTIFY) {
acpi_gbl_system_notify.node = NULL;
acpi_gbl_system_notify.handler = NULL;
@@ -488,28 +567,60 @@
/* Object exists - make sure there's an existing handler */
if (handler_type & ACPI_SYSTEM_NOTIFY) {
+ struct acpi_object_notify_handler *handler_obj;
+ struct acpi_object_notify_handler *parent_obj;
+
notify_obj = obj_desc->common_notify.system_notify;
if (!notify_obj) {
status = AE_NOT_EXIST;
goto unlock_and_exit;
}
- if (notify_obj->notify.handler != handler) {
+ handler_obj = ¬ify_obj->notify;
+ parent_obj = NULL;
+ while (handler_obj->handler != handler) {
+ if (handler_obj->next) {
+ parent_obj = handler_obj;
+ handler_obj = handler_obj->next;
+ } else {
+ break;
+ }
+ }
+
+ if (handler_obj->handler != handler) {
status = AE_BAD_PARAMETER;
goto unlock_and_exit;
}
- /* Make sure all deferred tasks are completed */
- (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
- acpi_os_wait_events_complete(NULL);
- status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
- if (ACPI_FAILURE(status)) {
- goto exit;
+ /*
+ * Remove the handler. There are three possible cases.
+ * First, we may need to remove a non-embedded object.
+ * Second, we may need to remove the embedded object's
+ * handler data, while non-embedded objects exist.
+ * Finally, we may need to remove the embedded object
+ * entirely along with its container.
+ */
+ if (parent_obj) {
+ /* Non-embedded object is being removed. */
+ parent_obj->next = handler_obj->next;
+ ACPI_FREE(handler_obj);
+ } else if (notify_obj->notify.next) {
+ /*
+ * The handler matches the embedded object, but
+ * there are more handler objects in the list.
+ * Replace the embedded object's data with the
+ * first next object's data and remove that
+ * object.
+ */
+ parent_obj = ¬ify_obj->notify;
+ handler_obj = notify_obj->notify.next;
+ *parent_obj = *handler_obj;
+ ACPI_FREE(handler_obj);
+ } else {
+ /* No more handler objects in the list. */
+ obj_desc->common_notify.system_notify = NULL;
+ acpi_ut_remove_reference(notify_obj);
}
-
- /* Remove the handler */
- obj_desc->common_notify.system_notify = NULL;
- acpi_ut_remove_reference(notify_obj);
}
if (handler_type & ACPI_DEVICE_NOTIFY) {
@@ -523,14 +634,6 @@
status = AE_BAD_PARAMETER;
goto unlock_and_exit;
}
- /* Make sure all deferred tasks are completed */
-
- (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
- acpi_os_wait_events_complete(NULL);
- status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
- if (ACPI_FAILURE(status)) {
- goto exit;
- }
/* Remove the handler */
obj_desc->common_notify.device_notify = NULL;
@@ -617,13 +720,6 @@
handler->context = context;
handler->method_node = gpe_event_info->dispatch.method_node;
- /* Disable the GPE before installing the handler */
-
- status = acpi_ev_disable_gpe(gpe_event_info);
- if (ACPI_FAILURE(status)) {
- goto unlock_and_exit;
- }
-
/* Install the handler */
flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
@@ -707,13 +803,6 @@
goto unlock_and_exit;
}
- /* Disable the GPE before removing the handler */
-
- status = acpi_ev_disable_gpe(gpe_event_info);
- if (ACPI_FAILURE(status)) {
- goto unlock_and_exit;
- }
-
/* Make sure all deferred tasks are completed */
(void)acpi_ut_release_mutex(ACPI_MTX_EVENTS);
diff --git a/drivers/acpi/acpica/evxfevnt.c b/drivers/acpi/acpica/evxfevnt.c
index eed7a38..124c157 100644
--- a/drivers/acpi/acpica/evxfevnt.c
+++ b/drivers/acpi/acpica/evxfevnt.c
@@ -201,67 +201,25 @@
/*******************************************************************************
*
- * FUNCTION: acpi_set_gpe_type
+ * FUNCTION: acpi_set_gpe
*
* PARAMETERS: gpe_device - Parent GPE Device
* gpe_number - GPE level within the GPE block
- * Type - New GPE type
- *
- * RETURN: Status
- *
- * DESCRIPTION: Set the type of an individual GPE
- *
- ******************************************************************************/
-acpi_status acpi_set_gpe_type(acpi_handle gpe_device, u32 gpe_number, u8 type)
-{
- acpi_status status = AE_OK;
- struct acpi_gpe_event_info *gpe_event_info;
-
- ACPI_FUNCTION_TRACE(acpi_set_gpe_type);
-
- /* Ensure that we have a valid GPE number */
-
- gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number);
- if (!gpe_event_info) {
- status = AE_BAD_PARAMETER;
- goto unlock_and_exit;
- }
-
- if ((gpe_event_info->flags & ACPI_GPE_TYPE_MASK) == type) {
- return_ACPI_STATUS(AE_OK);
- }
-
- /* Set the new type (will disable GPE if currently enabled) */
-
- status = acpi_ev_set_gpe_type(gpe_event_info, type);
-
- unlock_and_exit:
- return_ACPI_STATUS(status);
-}
-
-ACPI_EXPORT_SYMBOL(acpi_set_gpe_type)
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_enable_gpe
- *
- * PARAMETERS: gpe_device - Parent GPE Device
- * gpe_number - GPE level within the GPE block
- * Flags - Just enable, or also wake enable?
+ * action - Enable or disable
* Called from ISR or not
*
* RETURN: Status
*
- * DESCRIPTION: Enable an ACPI event (general purpose)
+ * DESCRIPTION: Enable or disable an ACPI event (general purpose)
*
******************************************************************************/
-acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number)
+acpi_status acpi_set_gpe(acpi_handle gpe_device, u32 gpe_number, u8 action)
{
acpi_status status = AE_OK;
acpi_cpu_flags flags;
struct acpi_gpe_event_info *gpe_event_info;
- ACPI_FUNCTION_TRACE(acpi_enable_gpe);
+ ACPI_FUNCTION_TRACE(acpi_set_gpe);
flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
@@ -273,15 +231,90 @@
goto unlock_and_exit;
}
- /* Perform the enable */
+ /* Perform the action */
- status = acpi_ev_enable_gpe(gpe_event_info, TRUE);
+ switch (action) {
+ case ACPI_GPE_ENABLE:
+ status = acpi_ev_enable_gpe(gpe_event_info);
+ break;
+
+ case ACPI_GPE_DISABLE:
+ status = acpi_ev_disable_gpe(gpe_event_info);
+ break;
+
+ default:
+ ACPI_ERROR((AE_INFO, "Invalid action\n"));
+ status = AE_BAD_PARAMETER;
+ break;
+ }
unlock_and_exit:
acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
return_ACPI_STATUS(status);
}
+ACPI_EXPORT_SYMBOL(acpi_set_gpe)
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_enable_gpe
+ *
+ * PARAMETERS: gpe_device - Parent GPE Device
+ * gpe_number - GPE level within the GPE block
+ * type - Purpose the GPE will be used for
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Take a reference to a GPE and enable it if necessary
+ *
+ ******************************************************************************/
+acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number, u8 type)
+{
+ acpi_status status = AE_OK;
+ acpi_cpu_flags flags;
+ struct acpi_gpe_event_info *gpe_event_info;
+
+ ACPI_FUNCTION_TRACE(acpi_enable_gpe);
+
+ if (type & ~ACPI_GPE_TYPE_WAKE_RUN)
+ return_ACPI_STATUS(AE_BAD_PARAMETER);
+
+ flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
+
+ /* Ensure that we have a valid GPE number */
+
+ gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number);
+ if (!gpe_event_info) {
+ status = AE_BAD_PARAMETER;
+ goto unlock_and_exit;
+ }
+
+ if (type & ACPI_GPE_TYPE_RUNTIME) {
+ if (++gpe_event_info->runtime_count == 1) {
+ status = acpi_ev_enable_gpe(gpe_event_info);
+ if (ACPI_FAILURE(status))
+ gpe_event_info->runtime_count--;
+ }
+ }
+
+ if (type & ACPI_GPE_TYPE_WAKE) {
+ if (!(gpe_event_info->flags & ACPI_GPE_CAN_WAKE)) {
+ status = AE_BAD_PARAMETER;
+ goto unlock_and_exit;
+ }
+
+ /*
+ * Wake-up GPEs are only enabled right prior to putting the
+ * system into a sleep state.
+ */
+ if (++gpe_event_info->wakeup_count == 1)
+ acpi_ev_update_gpe_enable_masks(gpe_event_info);
+ }
+
+unlock_and_exit:
+ acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
+ return_ACPI_STATUS(status);
+}
ACPI_EXPORT_SYMBOL(acpi_enable_gpe)
/*******************************************************************************
@@ -290,15 +323,14 @@
*
* PARAMETERS: gpe_device - Parent GPE Device
* gpe_number - GPE level within the GPE block
- * Flags - Just disable, or also wake disable?
- * Called from ISR or not
+ * type - Purpose the GPE won't be used for any more
*
* RETURN: Status
*
- * DESCRIPTION: Disable an ACPI event (general purpose)
+ * DESCRIPTION: Release a reference to a GPE and disable it if necessary
*
******************************************************************************/
-acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number)
+acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number, u8 type)
{
acpi_status status = AE_OK;
acpi_cpu_flags flags;
@@ -306,6 +338,9 @@
ACPI_FUNCTION_TRACE(acpi_disable_gpe);
+ if (type & ~ACPI_GPE_TYPE_WAKE_RUN)
+ return_ACPI_STATUS(AE_BAD_PARAMETER);
+
flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
/* Ensure that we have a valid GPE number */
@@ -315,13 +350,24 @@
goto unlock_and_exit;
}
- status = acpi_ev_disable_gpe(gpe_event_info);
+ if ((type & ACPI_GPE_TYPE_RUNTIME) && gpe_event_info->runtime_count) {
+ if (--gpe_event_info->runtime_count == 0)
+ status = acpi_ev_disable_gpe(gpe_event_info);
+ }
+
+ if ((type & ACPI_GPE_TYPE_WAKE) && gpe_event_info->wakeup_count) {
+ /*
+ * Wake-up GPEs are not enabled after leaving system sleep
+ * states, so we don't need to disable them here.
+ */
+ if (--gpe_event_info->wakeup_count == 0)
+ acpi_ev_update_gpe_enable_masks(gpe_event_info);
+ }
unlock_and_exit:
acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
return_ACPI_STATUS(status);
}
-
ACPI_EXPORT_SYMBOL(acpi_disable_gpe)
/*******************************************************************************
diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
index 8a95e83..f53fbe3 100644
--- a/drivers/acpi/button.c
+++ b/drivers/acpi/button.c
@@ -422,11 +422,10 @@
if (device->wakeup.flags.valid) {
/* Button's GPE is run-wake GPE */
- acpi_set_gpe_type(device->wakeup.gpe_device,
- device->wakeup.gpe_number,
- ACPI_GPE_TYPE_WAKE_RUN);
acpi_enable_gpe(device->wakeup.gpe_device,
- device->wakeup.gpe_number);
+ device->wakeup.gpe_number,
+ ACPI_GPE_TYPE_WAKE_RUN);
+ device->wakeup.run_wake_count++;
device->wakeup.state.enabled = 1;
}
@@ -446,6 +445,14 @@
{
struct acpi_button *button = acpi_driver_data(device);
+ if (device->wakeup.flags.valid) {
+ acpi_disable_gpe(device->wakeup.gpe_device,
+ device->wakeup.gpe_number,
+ ACPI_GPE_TYPE_WAKE_RUN);
+ device->wakeup.run_wake_count--;
+ device->wakeup.state.enabled = 0;
+ }
+
acpi_button_remove_fs(device);
input_unregister_device(button->input);
kfree(button);
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index d6471bb..27e0b92 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -307,7 +307,11 @@
pr_debug(PREFIX "transaction start\n");
/* disable GPE during transaction if storm is detected */
if (test_bit(EC_FLAGS_GPE_STORM, &ec->flags)) {
- acpi_disable_gpe(NULL, ec->gpe);
+ /*
+ * It has to be disabled at the hardware level regardless of the
+ * GPE reference counting, so that it doesn't trigger.
+ */
+ acpi_set_gpe(NULL, ec->gpe, ACPI_GPE_DISABLE);
}
status = acpi_ec_transaction_unlocked(ec, t);
@@ -316,8 +320,12 @@
ec_check_sci_sync(ec, acpi_ec_read_status(ec));
if (test_bit(EC_FLAGS_GPE_STORM, &ec->flags)) {
msleep(1);
- /* it is safe to enable GPE outside of transaction */
- acpi_enable_gpe(NULL, ec->gpe);
+ /*
+ * It is safe to enable the GPE outside of the transaction. Use
+ * acpi_set_gpe() for that, since we used it to disable the GPE
+ * above.
+ */
+ acpi_set_gpe(NULL, ec->gpe, ACPI_GPE_ENABLE);
} else if (t->irq_count > ACPI_EC_STORM_THRESHOLD) {
pr_info(PREFIX "GPE storm detected, "
"transactions will use polling mode\n");
@@ -788,8 +796,8 @@
&acpi_ec_gpe_handler, ec);
if (ACPI_FAILURE(status))
return -ENODEV;
- acpi_set_gpe_type(NULL, ec->gpe, ACPI_GPE_TYPE_RUNTIME);
- acpi_enable_gpe(NULL, ec->gpe);
+
+ acpi_enable_gpe(NULL, ec->gpe, ACPI_GPE_TYPE_RUNTIME);
status = acpi_install_address_space_handler(ec->handle,
ACPI_ADR_SPACE_EC,
&acpi_ec_space_handler,
@@ -806,6 +814,7 @@
} else {
acpi_remove_gpe_handler(NULL, ec->gpe,
&acpi_ec_gpe_handler);
+ acpi_disable_gpe(NULL, ec->gpe, ACPI_GPE_TYPE_RUNTIME);
return -ENODEV;
}
}
@@ -816,6 +825,7 @@
static void ec_remove_handlers(struct acpi_ec *ec)
{
+ acpi_disable_gpe(NULL, ec->gpe, ACPI_GPE_TYPE_RUNTIME);
if (ACPI_FAILURE(acpi_remove_address_space_handler(ec->handle,
ACPI_ADR_SPACE_EC, &acpi_ec_space_handler)))
pr_err(PREFIX "failed to remove space handler\n");
@@ -1057,16 +1067,16 @@
static int acpi_ec_suspend(struct acpi_device *device, pm_message_t state)
{
struct acpi_ec *ec = acpi_driver_data(device);
- /* Stop using GPE */
- acpi_disable_gpe(NULL, ec->gpe);
+ /* Stop using the GPE, but keep it reference counted. */
+ acpi_set_gpe(NULL, ec->gpe, ACPI_GPE_DISABLE);
return 0;
}
static int acpi_ec_resume(struct acpi_device *device)
{
struct acpi_ec *ec = acpi_driver_data(device);
- /* Enable use of GPE back */
- acpi_enable_gpe(NULL, ec->gpe);
+ /* Enable the GPE again, but don't reference count it once more. */
+ acpi_set_gpe(NULL, ec->gpe, ACPI_GPE_ENABLE);
return 0;
}
diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h
index cb28e05..9c4c962 100644
--- a/drivers/acpi/internal.h
+++ b/drivers/acpi/internal.h
@@ -36,8 +36,6 @@
int acpi_power_init(void);
int acpi_device_sleep_wake(struct acpi_device *dev,
int enable, int sleep_state, int dev_state);
-int acpi_enable_wakeup_device_power(struct acpi_device *dev, int sleep_state);
-int acpi_disable_wakeup_device_power(struct acpi_device *dev);
int acpi_power_get_inferred_state(struct acpi_device *device);
int acpi_power_transition(struct acpi_device *device, int state);
extern int acpi_power_nocheck;
diff --git a/drivers/acpi/pci_bind.c b/drivers/acpi/pci_bind.c
index a5a77b7..2ef0409 100644
--- a/drivers/acpi/pci_bind.c
+++ b/drivers/acpi/pci_bind.c
@@ -26,7 +26,9 @@
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/pci.h>
+#include <linux/pci-acpi.h>
#include <linux/acpi.h>
+#include <linux/pm_runtime.h>
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
@@ -38,7 +40,13 @@
struct pci_dev *dev;
dev = acpi_get_pci_dev(device->handle);
- if (!dev || !dev->subordinate)
+ if (!dev)
+ goto out;
+
+ device_set_run_wake(&dev->dev, false);
+ pci_acpi_remove_pm_notifier(device);
+
+ if (!dev->subordinate)
goto out;
acpi_pci_irq_del_prt(dev->subordinate);
@@ -62,6 +70,10 @@
if (!dev)
return 0;
+ pci_acpi_add_pm_notifier(device, dev);
+ if (device->wakeup.flags.run_wake)
+ device_set_run_wake(&dev->dev, true);
+
/*
* Install the 'bind' function to facilitate callbacks for
* children of the P2P bridge.
diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c
index 64f55b6..d724736 100644
--- a/drivers/acpi/pci_root.c
+++ b/drivers/acpi/pci_root.c
@@ -30,6 +30,7 @@
#include <linux/proc_fs.h>
#include <linux/spinlock.h>
#include <linux/pm.h>
+#include <linux/pm_runtime.h>
#include <linux/pci.h>
#include <linux/pci-acpi.h>
#include <linux/acpi.h>
@@ -528,6 +529,10 @@
if (flags != base_flags)
acpi_pci_osc_support(root, flags);
+ pci_acpi_add_bus_pm_notifier(device, root->bus);
+ if (device->wakeup.flags.run_wake)
+ device_set_run_wake(root->bus->bridge, true);
+
return 0;
end:
@@ -549,6 +554,9 @@
{
struct acpi_pci_root *root = acpi_driver_data(device);
+ device_set_run_wake(root->bus->bridge, false);
+ pci_acpi_remove_bus_pm_notifier(device);
+
kfree(root);
return 0;
}
@@ -558,6 +566,7 @@
if (acpi_pci_disabled)
return 0;
+ pci_acpi_crs_quirks();
if (acpi_bus_register_driver(&acpi_pci_root_driver) < 0)
return -ENODEV;
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index 3e00967..fb7fc24 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -741,19 +741,40 @@
return AE_OK;
}
-static int acpi_bus_get_wakeup_device_flags(struct acpi_device *device)
+static void acpi_bus_set_run_wake_flags(struct acpi_device *device)
{
- acpi_status status = 0;
- struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
- union acpi_object *package = NULL;
- int psw_error;
-
struct acpi_device_id button_device_ids[] = {
{"PNP0C0D", 0},
{"PNP0C0C", 0},
{"PNP0C0E", 0},
{"", 0},
};
+ acpi_status status;
+ acpi_event_status event_status;
+
+ device->wakeup.run_wake_count = 0;
+ device->wakeup.flags.notifier_present = 0;
+
+ /* Power button, Lid switch always enable wakeup */
+ if (!acpi_match_device_ids(device, button_device_ids)) {
+ device->wakeup.flags.run_wake = 1;
+ device->wakeup.flags.always_enabled = 1;
+ return;
+ }
+
+ status = acpi_get_gpe_status(NULL, device->wakeup.gpe_number,
+ ACPI_NOT_ISR, &event_status);
+ if (status == AE_OK)
+ device->wakeup.flags.run_wake =
+ !!(event_status & ACPI_EVENT_FLAG_HANDLE);
+}
+
+static int acpi_bus_get_wakeup_device_flags(struct acpi_device *device)
+{
+ acpi_status status = 0;
+ struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+ union acpi_object *package = NULL;
+ int psw_error;
/* _PRW */
status = acpi_evaluate_object(device->handle, "_PRW", NULL, &buffer);
@@ -773,6 +794,7 @@
device->wakeup.flags.valid = 1;
device->wakeup.prepare_count = 0;
+ acpi_bus_set_run_wake_flags(device);
/* Call _PSW/_DSW object to disable its ability to wake the sleeping
* system for the ACPI device with the _PRW object.
* The _PSW object is depreciated in ACPI 3.0 and is replaced by _DSW.
@@ -784,10 +806,6 @@
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"error in _DSW or _PSW evaluation\n"));
- /* Power button, Lid switch always enable wakeup */
- if (!acpi_match_device_ids(device, button_device_ids))
- device->wakeup.flags.run_wake = 1;
-
end:
if (ACPI_FAILURE(status))
device->flags.wake_capable = 0;
diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c
index 79d33d9..3bde594 100644
--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -745,9 +745,18 @@
return -ENODEV;
}
- error = enable ?
- acpi_enable_wakeup_device_power(adev, acpi_target_sleep_state) :
- acpi_disable_wakeup_device_power(adev);
+ if (enable) {
+ error = acpi_enable_wakeup_device_power(adev,
+ acpi_target_sleep_state);
+ if (!error)
+ acpi_enable_gpe(adev->wakeup.gpe_device,
+ adev->wakeup.gpe_number,
+ ACPI_GPE_TYPE_WAKE);
+ } else {
+ acpi_disable_gpe(adev->wakeup.gpe_device, adev->wakeup.gpe_number,
+ ACPI_GPE_TYPE_WAKE);
+ error = acpi_disable_wakeup_device_power(adev);
+ }
if (!error)
dev_info(dev, "wake-up capability %s by ACPI\n",
enable ? "enabled" : "disabled");
diff --git a/drivers/acpi/system.c b/drivers/acpi/system.c
index d112829..a206a12 100644
--- a/drivers/acpi/system.c
+++ b/drivers/acpi/system.c
@@ -387,10 +387,10 @@
if (index < num_gpes) {
if (!strcmp(buf, "disable\n") &&
(status & ACPI_EVENT_FLAG_ENABLED))
- result = acpi_disable_gpe(handle, index);
+ result = acpi_set_gpe(handle, index, ACPI_GPE_DISABLE);
else if (!strcmp(buf, "enable\n") &&
!(status & ACPI_EVENT_FLAG_ENABLED))
- result = acpi_enable_gpe(handle, index);
+ result = acpi_set_gpe(handle, index, ACPI_GPE_ENABLE);
else if (!strcmp(buf, "clear\n") &&
(status & ACPI_EVENT_FLAG_SET))
result = acpi_clear_gpe(handle, index, ACPI_NOT_ISR);
diff --git a/drivers/acpi/wakeup.c b/drivers/acpi/wakeup.c
index e0ee0c0..4b9d339 100644
--- a/drivers/acpi/wakeup.c
+++ b/drivers/acpi/wakeup.c
@@ -21,12 +21,12 @@
ACPI_MODULE_NAME("wakeup_devices")
/**
- * acpi_enable_wakeup_device_prep - prepare wakeup devices
- * @sleep_state: ACPI state
- * Enable all wakup devices power if the devices' wakeup level
- * is higher than requested sleep level
+ * acpi_enable_wakeup_device_prep - Prepare wake-up devices.
+ * @sleep_state: ACPI system sleep state.
+ *
+ * Enable all wake-up devices' power, unless the requested system sleep state is
+ * too deep.
*/
-
void acpi_enable_wakeup_device_prep(u8 sleep_state)
{
struct list_head *node, *next;
@@ -36,9 +36,8 @@
struct acpi_device,
wakeup_list);
- if (!dev->wakeup.flags.valid ||
- !dev->wakeup.state.enabled ||
- (sleep_state > (u32) dev->wakeup.sleep_state))
+ if (!dev->wakeup.flags.valid || !dev->wakeup.state.enabled
+ || (sleep_state > (u32) dev->wakeup.sleep_state))
continue;
acpi_enable_wakeup_device_power(dev, sleep_state);
@@ -46,9 +45,12 @@
}
/**
- * acpi_enable_wakeup_device - enable wakeup devices
- * @sleep_state: ACPI state
- * Enable all wakup devices's GPE
+ * acpi_enable_wakeup_device - Enable wake-up device GPEs.
+ * @sleep_state: ACPI system sleep state.
+ *
+ * Enable all wake-up devices' GPEs, with the assumption that
+ * acpi_disable_all_gpes() was executed before, so we don't need to disable any
+ * GPEs here.
*/
void acpi_enable_wakeup_device(u8 sleep_state)
{
@@ -65,29 +67,22 @@
if (!dev->wakeup.flags.valid)
continue;
- /* If users want to disable run-wake GPE,
- * we only disable it for wake and leave it for runtime
- */
if ((!dev->wakeup.state.enabled && !dev->wakeup.prepare_count)
- || sleep_state > (u32) dev->wakeup.sleep_state) {
- if (dev->wakeup.flags.run_wake) {
- /* set_gpe_type will disable GPE, leave it like that */
- acpi_set_gpe_type(dev->wakeup.gpe_device,
- dev->wakeup.gpe_number,
- ACPI_GPE_TYPE_RUNTIME);
- }
+ || sleep_state > (u32) dev->wakeup.sleep_state)
continue;
- }
- if (!dev->wakeup.flags.run_wake)
- acpi_enable_gpe(dev->wakeup.gpe_device,
- dev->wakeup.gpe_number);
+
+ /* The wake-up power should have been enabled already. */
+ acpi_set_gpe(dev->wakeup.gpe_device, dev->wakeup.gpe_number,
+ ACPI_GPE_ENABLE);
}
}
/**
- * acpi_disable_wakeup_device - disable devices' wakeup capability
- * @sleep_state: ACPI state
- * Disable all wakup devices's GPE and wakeup capability
+ * acpi_disable_wakeup_device - Disable devices' wakeup capability.
+ * @sleep_state: ACPI system sleep state.
+ *
+ * This function only affects devices with wakeup.state.enabled set, which means
+ * that it reverses the changes made by acpi_enable_wakeup_device_prep().
*/
void acpi_disable_wakeup_device(u8 sleep_state)
{
@@ -97,30 +92,11 @@
struct acpi_device *dev =
container_of(node, struct acpi_device, wakeup_list);
- if (!dev->wakeup.flags.valid)
+ if (!dev->wakeup.flags.valid || !dev->wakeup.state.enabled
+ || (sleep_state > (u32) dev->wakeup.sleep_state))
continue;
- if ((!dev->wakeup.state.enabled && !dev->wakeup.prepare_count)
- || sleep_state > (u32) dev->wakeup.sleep_state) {
- if (dev->wakeup.flags.run_wake) {
- acpi_set_gpe_type(dev->wakeup.gpe_device,
- dev->wakeup.gpe_number,
- ACPI_GPE_TYPE_WAKE_RUN);
- /* Re-enable it, since set_gpe_type will disable it */
- acpi_enable_gpe(dev->wakeup.gpe_device,
- dev->wakeup.gpe_number);
- }
- continue;
- }
-
acpi_disable_wakeup_device_power(dev);
- /* Never disable run-wake GPE */
- if (!dev->wakeup.flags.run_wake) {
- acpi_disable_gpe(dev->wakeup.gpe_device,
- dev->wakeup.gpe_number);
- acpi_clear_gpe(dev->wakeup.gpe_device,
- dev->wakeup.gpe_number, ACPI_NOT_ISR);
- }
}
}
@@ -134,13 +110,11 @@
struct acpi_device,
wakeup_list);
/* In case user doesn't load button driver */
- if (!dev->wakeup.flags.run_wake || dev->wakeup.state.enabled)
+ if (!dev->wakeup.flags.always_enabled ||
+ dev->wakeup.state.enabled)
continue;
- acpi_set_gpe_type(dev->wakeup.gpe_device,
- dev->wakeup.gpe_number,
- ACPI_GPE_TYPE_WAKE_RUN);
- acpi_enable_gpe(dev->wakeup.gpe_device,
- dev->wakeup.gpe_number);
+ acpi_enable_gpe(dev->wakeup.gpe_device, dev->wakeup.gpe_number,
+ ACPI_GPE_TYPE_WAKE);
dev->wakeup.state.enabled = 1;
}
mutex_unlock(&acpi_device_lock);
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index b343903..a6a736a 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -3082,8 +3082,16 @@
ahci_save_initial_config(pdev, hpriv);
/* prepare host */
- if (hpriv->cap & HOST_CAP_NCQ)
- pi.flags |= ATA_FLAG_NCQ | ATA_FLAG_FPDMA_AA;
+ if (hpriv->cap & HOST_CAP_NCQ) {
+ pi.flags |= ATA_FLAG_NCQ;
+ /* Auto-activate optimization is supposed to be supported on
+ all AHCI controllers indicating NCQ support, but it seems
+ to be broken at least on some NVIDIA MCP79 chipsets.
+ Until we get info on which NVIDIA chipsets don't have this
+ issue, if any, disable AA on all NVIDIA AHCIs. */
+ if (pdev->vendor != PCI_VENDOR_ID_NVIDIA)
+ pi.flags |= ATA_FLAG_FPDMA_AA;
+ }
if (hpriv->cap & HOST_CAP_PMP)
pi.flags |= ATA_FLAG_PMP;
diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
index 51042f0ba7..7eff828 100644
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -243,10 +243,12 @@
static int __devinit virtblk_probe(struct virtio_device *vdev)
{
struct virtio_blk *vblk;
+ struct request_queue *q;
int err;
u64 cap;
- u32 v;
- u32 blk_size, sg_elems;
+ u32 v, blk_size, sg_elems, opt_io_size;
+ u16 min_io_size;
+ u8 physical_block_exp, alignment_offset;
if (index_to_minor(index) >= 1 << MINORBITS)
return -ENOSPC;
@@ -293,13 +295,13 @@
goto out_mempool;
}
- vblk->disk->queue = blk_init_queue(do_virtblk_request, &vblk->lock);
- if (!vblk->disk->queue) {
+ q = vblk->disk->queue = blk_init_queue(do_virtblk_request, &vblk->lock);
+ if (!q) {
err = -ENOMEM;
goto out_put_disk;
}
- vblk->disk->queue->queuedata = vblk;
+ q->queuedata = vblk;
if (index < 26) {
sprintf(vblk->disk->disk_name, "vd%c", 'a' + index % 26);
@@ -323,10 +325,10 @@
/* If barriers are supported, tell block layer that queue is ordered */
if (virtio_has_feature(vdev, VIRTIO_BLK_F_FLUSH))
- blk_queue_ordered(vblk->disk->queue, QUEUE_ORDERED_DRAIN_FLUSH,
+ blk_queue_ordered(q, QUEUE_ORDERED_DRAIN_FLUSH,
virtblk_prepare_flush);
else if (virtio_has_feature(vdev, VIRTIO_BLK_F_BARRIER))
- blk_queue_ordered(vblk->disk->queue, QUEUE_ORDERED_TAG, NULL);
+ blk_queue_ordered(q, QUEUE_ORDERED_TAG, NULL);
/* If disk is read-only in the host, the guest should obey */
if (virtio_has_feature(vdev, VIRTIO_BLK_F_RO))
@@ -345,14 +347,14 @@
set_capacity(vblk->disk, cap);
/* We can handle whatever the host told us to handle. */
- blk_queue_max_phys_segments(vblk->disk->queue, vblk->sg_elems-2);
- blk_queue_max_hw_segments(vblk->disk->queue, vblk->sg_elems-2);
+ blk_queue_max_phys_segments(q, vblk->sg_elems-2);
+ blk_queue_max_hw_segments(q, vblk->sg_elems-2);
/* No need to bounce any requests */
- blk_queue_bounce_limit(vblk->disk->queue, BLK_BOUNCE_ANY);
+ blk_queue_bounce_limit(q, BLK_BOUNCE_ANY);
/* No real sector limit. */
- blk_queue_max_sectors(vblk->disk->queue, -1U);
+ blk_queue_max_sectors(q, -1U);
/* Host can optionally specify maximum segment size and number of
* segments. */
@@ -360,16 +362,45 @@
offsetof(struct virtio_blk_config, size_max),
&v);
if (!err)
- blk_queue_max_segment_size(vblk->disk->queue, v);
+ blk_queue_max_segment_size(q, v);
else
- blk_queue_max_segment_size(vblk->disk->queue, -1U);
+ blk_queue_max_segment_size(q, -1U);
/* Host can optionally specify the block size of the device */
err = virtio_config_val(vdev, VIRTIO_BLK_F_BLK_SIZE,
offsetof(struct virtio_blk_config, blk_size),
&blk_size);
if (!err)
- blk_queue_logical_block_size(vblk->disk->queue, blk_size);
+ blk_queue_logical_block_size(q, blk_size);
+ else
+ blk_size = queue_logical_block_size(q);
+
+ /* Use topology information if available */
+ err = virtio_config_val(vdev, VIRTIO_BLK_F_TOPOLOGY,
+ offsetof(struct virtio_blk_config, physical_block_exp),
+ &physical_block_exp);
+ if (!err && physical_block_exp)
+ blk_queue_physical_block_size(q,
+ blk_size * (1 << physical_block_exp));
+
+ err = virtio_config_val(vdev, VIRTIO_BLK_F_TOPOLOGY,
+ offsetof(struct virtio_blk_config, alignment_offset),
+ &alignment_offset);
+ if (!err && alignment_offset)
+ blk_queue_alignment_offset(q, blk_size * alignment_offset);
+
+ err = virtio_config_val(vdev, VIRTIO_BLK_F_TOPOLOGY,
+ offsetof(struct virtio_blk_config, min_io_size),
+ &min_io_size);
+ if (!err && min_io_size)
+ blk_queue_io_min(q, blk_size * min_io_size);
+
+ err = virtio_config_val(vdev, VIRTIO_BLK_F_TOPOLOGY,
+ offsetof(struct virtio_blk_config, opt_io_size),
+ &opt_io_size);
+ if (!err && opt_io_size)
+ blk_queue_io_opt(q, blk_size * opt_io_size);
+
add_disk(vblk->disk);
return 0;
@@ -412,7 +443,7 @@
static unsigned int features[] = {
VIRTIO_BLK_F_BARRIER, VIRTIO_BLK_F_SEG_MAX, VIRTIO_BLK_F_SIZE_MAX,
VIRTIO_BLK_F_GEOMETRY, VIRTIO_BLK_F_RO, VIRTIO_BLK_F_BLK_SIZE,
- VIRTIO_BLK_F_SCSI, VIRTIO_BLK_F_FLUSH
+ VIRTIO_BLK_F_SCSI, VIRTIO_BLK_F_FLUSH, VIRTIO_BLK_F_TOPOLOGY
};
/*
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index e023682..3141dd3 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -666,6 +666,14 @@
help
Virtio console for use with lguest and other hypervisors.
+ Also serves as a general-purpose serial device for data
+ transfer between the guest and host. Character devices at
+ /dev/vportNpn will be created when corresponding ports are
+ found, where N is the device number and n is the port number
+ within that device. If specified by the host, a sysfs
+ attribute called 'name' will be populated with a name for
+ the port which can be used by udev scripts to create a
+ symlink to the device.
config HVCS
tristate "IBM Hypervisor Virtual Console Server support"
diff --git a/drivers/char/hvc_beat.c b/drivers/char/hvc_beat.c
index 0afc8b8..5fe4631 100644
--- a/drivers/char/hvc_beat.c
+++ b/drivers/char/hvc_beat.c
@@ -84,7 +84,7 @@
return cnt;
}
-static struct hv_ops hvc_beat_get_put_ops = {
+static const struct hv_ops hvc_beat_get_put_ops = {
.get_chars = hvc_beat_get_chars,
.put_chars = hvc_beat_put_chars,
};
@@ -99,7 +99,7 @@
static int __init hvc_beat_console_init(void)
{
- if (hvc_beat_useit && machine_is_compatible("Beat")) {
+ if (hvc_beat_useit && of_machine_is_compatible("Beat")) {
hvc_instantiate(0, 0, &hvc_beat_get_put_ops);
}
return 0;
diff --git a/drivers/char/hvc_console.c b/drivers/char/hvc_console.c
index 416d342..d8dac58 100644
--- a/drivers/char/hvc_console.c
+++ b/drivers/char/hvc_console.c
@@ -125,7 +125,7 @@
* console interfaces but can still be used as a tty device. This has to be
* static because kmalloc will not work during early console init.
*/
-static struct hv_ops *cons_ops[MAX_NR_HVC_CONSOLES];
+static const struct hv_ops *cons_ops[MAX_NR_HVC_CONSOLES];
static uint32_t vtermnos[MAX_NR_HVC_CONSOLES] =
{[0 ... MAX_NR_HVC_CONSOLES - 1] = -1};
@@ -247,7 +247,7 @@
* vty adapters do NOT get an hvc_instantiate() callback since they
* appear after early console init.
*/
-int hvc_instantiate(uint32_t vtermno, int index, struct hv_ops *ops)
+int hvc_instantiate(uint32_t vtermno, int index, const struct hv_ops *ops)
{
struct hvc_struct *hp;
@@ -749,7 +749,8 @@
};
struct hvc_struct __devinit *hvc_alloc(uint32_t vtermno, int data,
- struct hv_ops *ops, int outbuf_size)
+ const struct hv_ops *ops,
+ int outbuf_size)
{
struct hvc_struct *hp;
int i;
diff --git a/drivers/char/hvc_console.h b/drivers/char/hvc_console.h
index 10950ca..52ddf4d 100644
--- a/drivers/char/hvc_console.h
+++ b/drivers/char/hvc_console.h
@@ -55,7 +55,7 @@
int outbuf_size;
int n_outbuf;
uint32_t vtermno;
- struct hv_ops *ops;
+ const struct hv_ops *ops;
int irq_requested;
int data;
struct winsize ws;
@@ -76,11 +76,12 @@
};
/* Register a vterm and a slot index for use as a console (console_init) */
-extern int hvc_instantiate(uint32_t vtermno, int index, struct hv_ops *ops);
+extern int hvc_instantiate(uint32_t vtermno, int index,
+ const struct hv_ops *ops);
/* register a vterm for hvc tty operation (module_init or hotplug add) */
extern struct hvc_struct * __devinit hvc_alloc(uint32_t vtermno, int data,
- struct hv_ops *ops, int outbuf_size);
+ const struct hv_ops *ops, int outbuf_size);
/* remove a vterm from hvc tty operation (module_exit or hotplug remove) */
extern int hvc_remove(struct hvc_struct *hp);
diff --git a/drivers/char/hvc_iseries.c b/drivers/char/hvc_iseries.c
index 936d05b..fd02426 100644
--- a/drivers/char/hvc_iseries.c
+++ b/drivers/char/hvc_iseries.c
@@ -197,7 +197,7 @@
return sent;
}
-static struct hv_ops hvc_get_put_ops = {
+static const struct hv_ops hvc_get_put_ops = {
.get_chars = get_chars,
.put_chars = put_chars,
.notifier_add = notifier_add_irq,
diff --git a/drivers/char/hvc_iucv.c b/drivers/char/hvc_iucv.c
index fe62bd0..21681a8 100644
--- a/drivers/char/hvc_iucv.c
+++ b/drivers/char/hvc_iucv.c
@@ -922,7 +922,7 @@
/* HVC operations */
-static struct hv_ops hvc_iucv_ops = {
+static const struct hv_ops hvc_iucv_ops = {
.get_chars = hvc_iucv_get_chars,
.put_chars = hvc_iucv_put_chars,
.notifier_add = hvc_iucv_notifier_add,
diff --git a/drivers/char/hvc_rtas.c b/drivers/char/hvc_rtas.c
index 88590d0..61c4a61 100644
--- a/drivers/char/hvc_rtas.c
+++ b/drivers/char/hvc_rtas.c
@@ -71,7 +71,7 @@
return i;
}
-static struct hv_ops hvc_rtas_get_put_ops = {
+static const struct hv_ops hvc_rtas_get_put_ops = {
.get_chars = hvc_rtas_read_console,
.put_chars = hvc_rtas_write_console,
};
diff --git a/drivers/char/hvc_udbg.c b/drivers/char/hvc_udbg.c
index bd63ba8..b0957e6 100644
--- a/drivers/char/hvc_udbg.c
+++ b/drivers/char/hvc_udbg.c
@@ -58,7 +58,7 @@
return i;
}
-static struct hv_ops hvc_udbg_ops = {
+static const struct hv_ops hvc_udbg_ops = {
.get_chars = hvc_udbg_get,
.put_chars = hvc_udbg_put,
};
diff --git a/drivers/char/hvc_vio.c b/drivers/char/hvc_vio.c
index 10be343..27370e9 100644
--- a/drivers/char/hvc_vio.c
+++ b/drivers/char/hvc_vio.c
@@ -77,7 +77,7 @@
return got;
}
-static struct hv_ops hvc_get_put_ops = {
+static const struct hv_ops hvc_get_put_ops = {
.get_chars = filtered_get_chars,
.put_chars = hvc_put_chars,
.notifier_add = notifier_add_irq,
diff --git a/drivers/char/hvc_xen.c b/drivers/char/hvc_xen.c
index b1a7163..60446f8 100644
--- a/drivers/char/hvc_xen.c
+++ b/drivers/char/hvc_xen.c
@@ -122,7 +122,7 @@
return recv;
}
-static struct hv_ops hvc_ops = {
+static const struct hv_ops hvc_ops = {
.get_chars = read_console,
.put_chars = write_console,
.notifier_add = notifier_add_irq,
diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig
index 8706026..6ea1014 100644
--- a/drivers/char/hw_random/Kconfig
+++ b/drivers/char/hw_random/Kconfig
@@ -186,3 +186,15 @@
module will be called mxc-rnga.
If unsure, say Y.
+
+config HW_RANDOM_NOMADIK
+ tristate "ST-Ericsson Nomadik Random Number Generator support"
+ depends on HW_RANDOM && PLAT_NOMADIK
+ ---help---
+ This driver provides kernel-side support for the Random Number
+ Generator hardware found on ST-Ericsson SoCs (8815 and 8500).
+
+ To compile this driver as a module, choose M here: the
+ module will be called nomadik-rng.
+
+ If unsure, say Y.
diff --git a/drivers/char/hw_random/Makefile b/drivers/char/hw_random/Makefile
index 5eeb130..4273308 100644
--- a/drivers/char/hw_random/Makefile
+++ b/drivers/char/hw_random/Makefile
@@ -18,3 +18,4 @@
obj-$(CONFIG_HW_RANDOM_TX4939) += tx4939-rng.o
obj-$(CONFIG_HW_RANDOM_MXC_RNGA) += mxc-rnga.o
obj-$(CONFIG_HW_RANDOM_OCTEON) += octeon-rng.o
+obj-$(CONFIG_HW_RANDOM_NOMADIK) += nomadik-rng.o
diff --git a/drivers/char/hw_random/nomadik-rng.c b/drivers/char/hw_random/nomadik-rng.c
new file mode 100644
index 0000000..a8b4c40
--- /dev/null
+++ b/drivers/char/hw_random/nomadik-rng.c
@@ -0,0 +1,103 @@
+/*
+ * Nomadik RNG support
+ * Copyright 2009 Alessandro Rubini
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/amba/bus.h>
+#include <linux/hw_random.h>
+#include <linux/io.h>
+
+static int nmk_rng_read(struct hwrng *rng, void *data, size_t max, bool wait)
+{
+ void __iomem *base = (void __iomem *)rng->priv;
+
+ /*
+ * The register is 32 bits and gives 16 random bits (low half).
+ * A subsequent read will delay the core for 400ns, so we just read
+ * once and accept the very unlikely very small delay, even if wait==0.
+ */
+ *(u16 *)data = __raw_readl(base + 8) & 0xffff;
+ return 2;
+}
+
+/* we have at most one RNG per machine, granted */
+static struct hwrng nmk_rng = {
+ .name = "nomadik",
+ .read = nmk_rng_read,
+};
+
+static int nmk_rng_probe(struct amba_device *dev, struct amba_id *id)
+{
+ void __iomem *base;
+ int ret;
+
+ ret = amba_request_regions(dev, dev->dev.init_name);
+ if (ret)
+ return ret;
+ ret = -ENOMEM;
+ base = ioremap(dev->res.start, resource_size(&dev->res));
+ if (!base)
+ goto out_release;
+ nmk_rng.priv = (unsigned long)base;
+ ret = hwrng_register(&nmk_rng);
+ if (ret)
+ goto out_unmap;
+ return 0;
+
+out_unmap:
+ iounmap(base);
+out_release:
+ amba_release_regions(dev);
+ return ret;
+}
+
+static int nmk_rng_remove(struct amba_device *dev)
+{
+ void __iomem *base = (void __iomem *)nmk_rng.priv;
+ hwrng_unregister(&nmk_rng);
+ iounmap(base);
+ amba_release_regions(dev);
+ return 0;
+}
+
+static struct amba_id nmk_rng_ids[] = {
+ {
+ .id = 0x000805e1,
+ .mask = 0x000fffff, /* top bits are rev and cfg: accept all */
+ },
+ {0, 0},
+};
+
+static struct amba_driver nmk_rng_driver = {
+ .drv = {
+ .owner = THIS_MODULE,
+ .name = "rng",
+ },
+ .probe = nmk_rng_probe,
+ .remove = nmk_rng_remove,
+ .id_table = nmk_rng_ids,
+};
+
+static int __init nmk_rng_init(void)
+{
+ return amba_driver_register(&nmk_rng_driver);
+}
+
+static void __devexit nmk_rng_exit(void)
+{
+ amba_driver_unregister(&nmk_rng_driver);
+}
+
+module_init(nmk_rng_init);
+module_exit(nmk_rng_exit);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c
index a035ae3..213373b 100644
--- a/drivers/char/virtio_console.c
+++ b/drivers/char/virtio_console.c
@@ -1,18 +1,6 @@
-/*D:300
- * The Guest console driver
- *
- * Writing console drivers is one of the few remaining Dark Arts in Linux.
- * Fortunately for us, the path of virtual consoles has been well-trodden by
- * the PowerPC folks, who wrote "hvc_console.c" to generically support any
- * virtual console. We use that infrastructure which only requires us to write
- * the basic put_chars and get_chars functions and call the right register
- * functions.
- :*/
-
-/*M:002 The console can be flooded: while the Guest is processing input the
- * Host can send more. Buffering in the Host could alleviate this, but it is a
- * difficult problem in general. :*/
-/* Copyright (C) 2006, 2007 Rusty Russell, IBM Corporation
+/*
+ * Copyright (C) 2006, 2007, 2009 Rusty Russell, IBM Corporation
+ * Copyright (C) 2009, 2010 Red Hat, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -28,142 +16,694 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#include <linux/cdev.h>
+#include <linux/debugfs.h>
+#include <linux/device.h>
#include <linux/err.h>
+#include <linux/fs.h>
#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/poll.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
#include <linux/virtio.h>
#include <linux/virtio_console.h>
+#include <linux/wait.h>
+#include <linux/workqueue.h>
#include "hvc_console.h"
-/*D:340 These represent our input and output console queues, and the virtio
- * operations for them. */
-static struct virtqueue *in_vq, *out_vq;
-static struct virtio_device *vdev;
-
-/* This is our input buffer, and how much data is left in it. */
-static unsigned int in_len;
-static char *in, *inbuf;
-
-/* The operations for our console. */
-static struct hv_ops virtio_cons;
-
-/* The hvc device */
-static struct hvc_struct *hvc;
-
-/*D:310 The put_chars() callback is pretty straightforward.
+/*
+ * This is a global struct for storing common data for all the devices
+ * this driver handles.
*
- * We turn the characters into a scatter-gather list, add it to the output
- * queue and then kick the Host. Then we sit here waiting for it to finish:
- * inefficient in theory, but in practice implementations will do it
- * immediately (lguest's Launcher does). */
-static int put_chars(u32 vtermno, const char *buf, int count)
+ * Mainly, it has a linked list for all the consoles in one place so
+ * that callbacks from hvc for get_chars(), put_chars() work properly
+ * across multiple devices and multiple ports per device.
+ */
+struct ports_driver_data {
+ /* Used for registering chardevs */
+ struct class *class;
+
+ /* Used for exporting per-port information to debugfs */
+ struct dentry *debugfs_dir;
+
+ /* Number of devices this driver is handling */
+ unsigned int index;
+
+ /*
+ * This is used to keep track of the number of hvc consoles
+ * spawned by this driver. This number is given as the first
+ * argument to hvc_alloc(). To correctly map an initial
+ * console spawned via hvc_instantiate to the console being
+ * hooked up via hvc_alloc, we need to pass the same vtermno.
+ *
+ * We also just assume the first console being initialised was
+ * the first one that got used as the initial console.
+ */
+ unsigned int next_vtermno;
+
+ /* All the console devices handled by this driver */
+ struct list_head consoles;
+};
+static struct ports_driver_data pdrvdata;
+
+DEFINE_SPINLOCK(pdrvdata_lock);
+
+/* This struct holds information that's relevant only for console ports */
+struct console {
+ /* We'll place all consoles in a list in the pdrvdata struct */
+ struct list_head list;
+
+ /* The hvc device associated with this console port */
+ struct hvc_struct *hvc;
+
+ /*
+ * This number identifies the number that we used to register
+ * with hvc in hvc_instantiate() and hvc_alloc(); this is the
+ * number passed on by the hvc callbacks to us to
+ * differentiate between the other console ports handled by
+ * this driver
+ */
+ u32 vtermno;
+};
+
+struct port_buffer {
+ char *buf;
+
+ /* size of the buffer in *buf above */
+ size_t size;
+
+ /* used length of the buffer */
+ size_t len;
+ /* offset in the buf from which to consume data */
+ size_t offset;
+};
+
+/*
+ * This is a per-device struct that stores data common to all the
+ * ports for that device (vdev->priv).
+ */
+struct ports_device {
+ /*
+ * Workqueue handlers where we process deferred work after
+ * notification
+ */
+ struct work_struct control_work;
+ struct work_struct config_work;
+
+ struct list_head ports;
+
+ /* To protect the list of ports */
+ spinlock_t ports_lock;
+
+ /* To protect the vq operations for the control channel */
+ spinlock_t cvq_lock;
+
+ /* The current config space is stored here */
+ struct virtio_console_config config;
+
+ /* The virtio device we're associated with */
+ struct virtio_device *vdev;
+
+ /*
+ * A couple of virtqueues for the control channel: one for
+ * guest->host transfers, one for host->guest transfers
+ */
+ struct virtqueue *c_ivq, *c_ovq;
+
+ /* Array of per-port IO virtqueues */
+ struct virtqueue **in_vqs, **out_vqs;
+
+ /* Used for numbering devices for sysfs and debugfs */
+ unsigned int drv_index;
+
+ /* Major number for this device. Ports will be created as minors. */
+ int chr_major;
+};
+
+/* This struct holds the per-port data */
+struct port {
+ /* Next port in the list, head is in the ports_device */
+ struct list_head list;
+
+ /* Pointer to the parent virtio_console device */
+ struct ports_device *portdev;
+
+ /* The current buffer from which data has to be fed to readers */
+ struct port_buffer *inbuf;
+
+ /*
+ * To protect the operations on the in_vq associated with this
+ * port. Has to be a spinlock because it can be called from
+ * interrupt context (get_char()).
+ */
+ spinlock_t inbuf_lock;
+
+ /* The IO vqs for this port */
+ struct virtqueue *in_vq, *out_vq;
+
+ /* File in the debugfs directory that exposes this port's information */
+ struct dentry *debugfs_file;
+
+ /*
+ * The entries in this struct will be valid if this port is
+ * hooked up to an hvc console
+ */
+ struct console cons;
+
+ /* Each port associates with a separate char device */
+ struct cdev cdev;
+ struct device *dev;
+
+ /* A waitqueue for poll() or blocking read operations */
+ wait_queue_head_t waitqueue;
+
+ /* The 'name' of the port that we expose via sysfs properties */
+ char *name;
+
+ /* The 'id' to identify the port with the Host */
+ u32 id;
+
+ /* Is the host device open */
+ bool host_connected;
+
+ /* We should allow only one process to open a port */
+ bool guest_connected;
+};
+
+/* This is the very early arch-specified put chars function. */
+static int (*early_put_chars)(u32, const char *, int);
+
+static struct port *find_port_by_vtermno(u32 vtermno)
{
- struct scatterlist sg[1];
+ struct port *port;
+ struct console *cons;
+ unsigned long flags;
+
+ spin_lock_irqsave(&pdrvdata_lock, flags);
+ list_for_each_entry(cons, &pdrvdata.consoles, list) {
+ if (cons->vtermno == vtermno) {
+ port = container_of(cons, struct port, cons);
+ goto out;
+ }
+ }
+ port = NULL;
+out:
+ spin_unlock_irqrestore(&pdrvdata_lock, flags);
+ return port;
+}
+
+static struct port *find_port_by_id(struct ports_device *portdev, u32 id)
+{
+ struct port *port;
+ unsigned long flags;
+
+ spin_lock_irqsave(&portdev->ports_lock, flags);
+ list_for_each_entry(port, &portdev->ports, list)
+ if (port->id == id)
+ goto out;
+ port = NULL;
+out:
+ spin_unlock_irqrestore(&portdev->ports_lock, flags);
+
+ return port;
+}
+
+static struct port *find_port_by_vq(struct ports_device *portdev,
+ struct virtqueue *vq)
+{
+ struct port *port;
+ unsigned long flags;
+
+ spin_lock_irqsave(&portdev->ports_lock, flags);
+ list_for_each_entry(port, &portdev->ports, list)
+ if (port->in_vq == vq || port->out_vq == vq)
+ goto out;
+ port = NULL;
+out:
+ spin_unlock_irqrestore(&portdev->ports_lock, flags);
+ return port;
+}
+
+static bool is_console_port(struct port *port)
+{
+ if (port->cons.hvc)
+ return true;
+ return false;
+}
+
+static inline bool use_multiport(struct ports_device *portdev)
+{
+ /*
+ * This condition can be true when put_chars is called from
+ * early_init
+ */
+ if (!portdev->vdev)
+ return 0;
+ return portdev->vdev->features[0] & (1 << VIRTIO_CONSOLE_F_MULTIPORT);
+}
+
+static void free_buf(struct port_buffer *buf)
+{
+ kfree(buf->buf);
+ kfree(buf);
+}
+
+static struct port_buffer *alloc_buf(size_t buf_size)
+{
+ struct port_buffer *buf;
+
+ buf = kmalloc(sizeof(*buf), GFP_KERNEL);
+ if (!buf)
+ goto fail;
+ buf->buf = kzalloc(buf_size, GFP_KERNEL);
+ if (!buf->buf)
+ goto free_buf;
+ buf->len = 0;
+ buf->offset = 0;
+ buf->size = buf_size;
+ return buf;
+
+free_buf:
+ kfree(buf);
+fail:
+ return NULL;
+}
+
+/* Callers should take appropriate locks */
+static void *get_inbuf(struct port *port)
+{
+ struct port_buffer *buf;
+ struct virtqueue *vq;
unsigned int len;
- /* This is a convenient routine to initialize a single-elem sg list */
- sg_init_one(sg, buf, count);
-
- /* add_buf wants a token to identify this buffer: we hand it any
- * non-NULL pointer, since there's only ever one buffer. */
- if (out_vq->vq_ops->add_buf(out_vq, sg, 1, 0, (void *)1) >= 0) {
- /* Tell Host to go! */
- out_vq->vq_ops->kick(out_vq);
- /* Chill out until it's done with the buffer. */
- while (!out_vq->vq_ops->get_buf(out_vq, &len))
- cpu_relax();
+ vq = port->in_vq;
+ buf = vq->vq_ops->get_buf(vq, &len);
+ if (buf) {
+ buf->len = len;
+ buf->offset = 0;
}
-
- /* We're expected to return the amount of data we wrote: all of it. */
- return count;
+ return buf;
}
-/* Create a scatter-gather list representing our input buffer and put it in the
- * queue. */
-static void add_inbuf(void)
+/*
+ * Create a scatter-gather list representing our input buffer and put
+ * it in the queue.
+ *
+ * Callers should take appropriate locks.
+ */
+static int add_inbuf(struct virtqueue *vq, struct port_buffer *buf)
{
struct scatterlist sg[1];
- sg_init_one(sg, inbuf, PAGE_SIZE);
+ int ret;
- /* We should always be able to add one buffer to an empty queue. */
- if (in_vq->vq_ops->add_buf(in_vq, sg, 0, 1, inbuf) < 0)
- BUG();
- in_vq->vq_ops->kick(in_vq);
+ sg_init_one(sg, buf->buf, buf->size);
+
+ ret = vq->vq_ops->add_buf(vq, sg, 0, 1, buf);
+ vq->vq_ops->kick(vq);
+ return ret;
}
-/*D:350 get_chars() is the callback from the hvc_console infrastructure when
- * an interrupt is received.
+/* Discard any unread data this port has. Callers lockers. */
+static void discard_port_data(struct port *port)
+{
+ struct port_buffer *buf;
+ struct virtqueue *vq;
+ unsigned int len;
+ int ret;
+
+ vq = port->in_vq;
+ if (port->inbuf)
+ buf = port->inbuf;
+ else
+ buf = vq->vq_ops->get_buf(vq, &len);
+
+ ret = 0;
+ while (buf) {
+ if (add_inbuf(vq, buf) < 0) {
+ ret++;
+ free_buf(buf);
+ }
+ buf = vq->vq_ops->get_buf(vq, &len);
+ }
+ port->inbuf = NULL;
+ if (ret)
+ dev_warn(port->dev, "Errors adding %d buffers back to vq\n",
+ ret);
+}
+
+static bool port_has_data(struct port *port)
+{
+ unsigned long flags;
+ bool ret;
+
+ spin_lock_irqsave(&port->inbuf_lock, flags);
+ if (port->inbuf) {
+ ret = true;
+ goto out;
+ }
+ port->inbuf = get_inbuf(port);
+ if (port->inbuf) {
+ ret = true;
+ goto out;
+ }
+ ret = false;
+out:
+ spin_unlock_irqrestore(&port->inbuf_lock, flags);
+ return ret;
+}
+
+static ssize_t send_control_msg(struct port *port, unsigned int event,
+ unsigned int value)
+{
+ struct scatterlist sg[1];
+ struct virtio_console_control cpkt;
+ struct virtqueue *vq;
+ int len;
+
+ if (!use_multiport(port->portdev))
+ return 0;
+
+ cpkt.id = port->id;
+ cpkt.event = event;
+ cpkt.value = value;
+
+ vq = port->portdev->c_ovq;
+
+ sg_init_one(sg, &cpkt, sizeof(cpkt));
+ if (vq->vq_ops->add_buf(vq, sg, 1, 0, &cpkt) >= 0) {
+ vq->vq_ops->kick(vq);
+ while (!vq->vq_ops->get_buf(vq, &len))
+ cpu_relax();
+ }
+ return 0;
+}
+
+static ssize_t send_buf(struct port *port, void *in_buf, size_t in_count)
+{
+ struct scatterlist sg[1];
+ struct virtqueue *out_vq;
+ ssize_t ret;
+ unsigned int len;
+
+ out_vq = port->out_vq;
+
+ sg_init_one(sg, in_buf, in_count);
+ ret = out_vq->vq_ops->add_buf(out_vq, sg, 1, 0, in_buf);
+
+ /* Tell Host to go! */
+ out_vq->vq_ops->kick(out_vq);
+
+ if (ret < 0) {
+ len = 0;
+ goto fail;
+ }
+
+ /*
+ * Wait till the host acknowledges it pushed out the data we
+ * sent. Also ensure we return to userspace the number of
+ * bytes that were successfully consumed by the host.
+ */
+ while (!out_vq->vq_ops->get_buf(out_vq, &len))
+ cpu_relax();
+fail:
+ /* We're expected to return the amount of data we wrote */
+ return len;
+}
+
+/*
+ * Give out the data that's requested from the buffer that we have
+ * queued up.
+ */
+static ssize_t fill_readbuf(struct port *port, char *out_buf, size_t out_count,
+ bool to_user)
+{
+ struct port_buffer *buf;
+ unsigned long flags;
+
+ if (!out_count || !port_has_data(port))
+ return 0;
+
+ buf = port->inbuf;
+ out_count = min(out_count, buf->len - buf->offset);
+
+ if (to_user) {
+ ssize_t ret;
+
+ ret = copy_to_user(out_buf, buf->buf + buf->offset, out_count);
+ if (ret)
+ return -EFAULT;
+ } else {
+ memcpy(out_buf, buf->buf + buf->offset, out_count);
+ }
+
+ buf->offset += out_count;
+
+ if (buf->offset == buf->len) {
+ /*
+ * We're done using all the data in this buffer.
+ * Re-queue so that the Host can send us more data.
+ */
+ spin_lock_irqsave(&port->inbuf_lock, flags);
+ port->inbuf = NULL;
+
+ if (add_inbuf(port->in_vq, buf) < 0)
+ dev_warn(port->dev, "failed add_buf\n");
+
+ spin_unlock_irqrestore(&port->inbuf_lock, flags);
+ }
+ /* Return the number of bytes actually copied */
+ return out_count;
+}
+
+/* The condition that must be true for polling to end */
+static bool wait_is_over(struct port *port)
+{
+ return port_has_data(port) || !port->host_connected;
+}
+
+static ssize_t port_fops_read(struct file *filp, char __user *ubuf,
+ size_t count, loff_t *offp)
+{
+ struct port *port;
+ ssize_t ret;
+
+ port = filp->private_data;
+
+ if (!port_has_data(port)) {
+ /*
+ * If nothing's connected on the host just return 0 in
+ * case of list_empty; this tells the userspace app
+ * that there's no connection
+ */
+ if (!port->host_connected)
+ return 0;
+ if (filp->f_flags & O_NONBLOCK)
+ return -EAGAIN;
+
+ ret = wait_event_interruptible(port->waitqueue,
+ wait_is_over(port));
+ if (ret < 0)
+ return ret;
+ }
+ /*
+ * We could've received a disconnection message while we were
+ * waiting for more data.
+ *
+ * This check is not clubbed in the if() statement above as we
+ * might receive some data as well as the host could get
+ * disconnected after we got woken up from our wait. So we
+ * really want to give off whatever data we have and only then
+ * check for host_connected.
+ */
+ if (!port_has_data(port) && !port->host_connected)
+ return 0;
+
+ return fill_readbuf(port, ubuf, count, true);
+}
+
+static ssize_t port_fops_write(struct file *filp, const char __user *ubuf,
+ size_t count, loff_t *offp)
+{
+ struct port *port;
+ char *buf;
+ ssize_t ret;
+
+ port = filp->private_data;
+
+ count = min((size_t)(32 * 1024), count);
+
+ buf = kmalloc(count, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ ret = copy_from_user(buf, ubuf, count);
+ if (ret) {
+ ret = -EFAULT;
+ goto free_buf;
+ }
+
+ ret = send_buf(port, buf, count);
+free_buf:
+ kfree(buf);
+ return ret;
+}
+
+static unsigned int port_fops_poll(struct file *filp, poll_table *wait)
+{
+ struct port *port;
+ unsigned int ret;
+
+ port = filp->private_data;
+ poll_wait(filp, &port->waitqueue, wait);
+
+ ret = 0;
+ if (port->inbuf)
+ ret |= POLLIN | POLLRDNORM;
+ if (port->host_connected)
+ ret |= POLLOUT;
+ if (!port->host_connected)
+ ret |= POLLHUP;
+
+ return ret;
+}
+
+static int port_fops_release(struct inode *inode, struct file *filp)
+{
+ struct port *port;
+
+ port = filp->private_data;
+
+ /* Notify host of port being closed */
+ send_control_msg(port, VIRTIO_CONSOLE_PORT_OPEN, 0);
+
+ spin_lock_irq(&port->inbuf_lock);
+ port->guest_connected = false;
+
+ discard_port_data(port);
+
+ spin_unlock_irq(&port->inbuf_lock);
+
+ return 0;
+}
+
+static int port_fops_open(struct inode *inode, struct file *filp)
+{
+ struct cdev *cdev = inode->i_cdev;
+ struct port *port;
+
+ port = container_of(cdev, struct port, cdev);
+ filp->private_data = port;
+
+ /*
+ * Don't allow opening of console port devices -- that's done
+ * via /dev/hvc
+ */
+ if (is_console_port(port))
+ return -ENXIO;
+
+ /* Allow only one process to open a particular port at a time */
+ spin_lock_irq(&port->inbuf_lock);
+ if (port->guest_connected) {
+ spin_unlock_irq(&port->inbuf_lock);
+ return -EMFILE;
+ }
+
+ port->guest_connected = true;
+ spin_unlock_irq(&port->inbuf_lock);
+
+ /* Notify host of port being opened */
+ send_control_msg(filp->private_data, VIRTIO_CONSOLE_PORT_OPEN, 1);
+
+ return 0;
+}
+
+/*
+ * The file operations that we support: programs in the guest can open
+ * a console device, read from it, write to it, poll for data and
+ * close it. The devices are at
+ * /dev/vport<device number>p<port number>
+ */
+static const struct file_operations port_fops = {
+ .owner = THIS_MODULE,
+ .open = port_fops_open,
+ .read = port_fops_read,
+ .write = port_fops_write,
+ .poll = port_fops_poll,
+ .release = port_fops_release,
+};
+
+/*
+ * The put_chars() callback is pretty straightforward.
*
- * Most of the code deals with the fact that the hvc_console() infrastructure
- * only asks us for 16 bytes at a time. We keep in_offset and in_used fields
- * for partially-filled buffers. */
+ * We turn the characters into a scatter-gather list, add it to the
+ * output queue and then kick the Host. Then we sit here waiting for
+ * it to finish: inefficient in theory, but in practice
+ * implementations will do it immediately (lguest's Launcher does).
+ */
+static int put_chars(u32 vtermno, const char *buf, int count)
+{
+ struct port *port;
+
+ port = find_port_by_vtermno(vtermno);
+ if (!port)
+ return 0;
+
+ if (unlikely(early_put_chars))
+ return early_put_chars(vtermno, buf, count);
+
+ return send_buf(port, (void *)buf, count);
+}
+
+/*
+ * get_chars() is the callback from the hvc_console infrastructure
+ * when an interrupt is received.
+ *
+ * We call out to fill_readbuf that gets us the required data from the
+ * buffers that are queued up.
+ */
static int get_chars(u32 vtermno, char *buf, int count)
{
+ struct port *port;
+
+ port = find_port_by_vtermno(vtermno);
+ if (!port)
+ return 0;
+
/* If we don't have an input queue yet, we can't get input. */
- BUG_ON(!in_vq);
+ BUG_ON(!port->in_vq);
- /* No buffer? Try to get one. */
- if (!in_len) {
- in = in_vq->vq_ops->get_buf(in_vq, &in_len);
- if (!in)
- return 0;
- }
-
- /* You want more than we have to give? Well, try wanting less! */
- if (in_len < count)
- count = in_len;
-
- /* Copy across to their buffer and increment offset. */
- memcpy(buf, in, count);
- in += count;
- in_len -= count;
-
- /* Finished? Re-register buffer so Host will use it again. */
- if (in_len == 0)
- add_inbuf();
-
- return count;
-}
-/*:*/
-
-/*D:320 Console drivers are initialized very early so boot messages can go out,
- * so we do things slightly differently from the generic virtio initialization
- * of the net and block drivers.
- *
- * At this stage, the console is output-only. It's too early to set up a
- * virtqueue, so we let the drivers do some boutique early-output thing. */
-int __init virtio_cons_early_init(int (*put_chars)(u32, const char *, int))
-{
- virtio_cons.put_chars = put_chars;
- return hvc_instantiate(0, 0, &virtio_cons);
+ return fill_readbuf(port, buf, count, false);
}
-/*
- * virtio console configuration. This supports:
- * - console resize
- */
-static void virtcons_apply_config(struct virtio_device *dev)
+static void resize_console(struct port *port)
{
+ struct virtio_device *vdev;
struct winsize ws;
- if (virtio_has_feature(dev, VIRTIO_CONSOLE_F_SIZE)) {
- dev->config->get(dev,
- offsetof(struct virtio_console_config, cols),
- &ws.ws_col, sizeof(u16));
- dev->config->get(dev,
- offsetof(struct virtio_console_config, rows),
- &ws.ws_row, sizeof(u16));
- hvc_resize(hvc, ws);
+ vdev = port->portdev->vdev;
+ if (virtio_has_feature(vdev, VIRTIO_CONSOLE_F_SIZE)) {
+ vdev->config->get(vdev,
+ offsetof(struct virtio_console_config, cols),
+ &ws.ws_col, sizeof(u16));
+ vdev->config->get(vdev,
+ offsetof(struct virtio_console_config, rows),
+ &ws.ws_row, sizeof(u16));
+ hvc_resize(port->cons.hvc, ws);
}
}
-/*
- * we support only one console, the hvc struct is a global var
- * We set the configuration at this point, since we now have a tty
- */
+/* We set the configuration at this point, since we now have a tty */
static int notifier_add_vio(struct hvc_struct *hp, int data)
{
+ struct port *port;
+
+ port = find_port_by_vtermno(hp->vtermno);
+ if (!port)
+ return -EINVAL;
+
hp->irq_requested = 1;
- virtcons_apply_config(vdev);
+ resize_console(port);
return 0;
}
@@ -173,79 +713,797 @@
hp->irq_requested = 0;
}
-static void hvc_handle_input(struct virtqueue *vq)
+/* The operations for console ports. */
+static const struct hv_ops hv_ops = {
+ .get_chars = get_chars,
+ .put_chars = put_chars,
+ .notifier_add = notifier_add_vio,
+ .notifier_del = notifier_del_vio,
+ .notifier_hangup = notifier_del_vio,
+};
+
+/*
+ * Console drivers are initialized very early so boot messages can go
+ * out, so we do things slightly differently from the generic virtio
+ * initialization of the net and block drivers.
+ *
+ * At this stage, the console is output-only. It's too early to set
+ * up a virtqueue, so we let the drivers do some boutique early-output
+ * thing.
+ */
+int __init virtio_cons_early_init(int (*put_chars)(u32, const char *, int))
{
- if (hvc_poll(hvc))
+ early_put_chars = put_chars;
+ return hvc_instantiate(0, 0, &hv_ops);
+}
+
+int init_port_console(struct port *port)
+{
+ int ret;
+
+ /*
+ * The Host's telling us this port is a console port. Hook it
+ * up with an hvc console.
+ *
+ * To set up and manage our virtual console, we call
+ * hvc_alloc().
+ *
+ * The first argument of hvc_alloc() is the virtual console
+ * number. The second argument is the parameter for the
+ * notification mechanism (like irq number). We currently
+ * leave this as zero, virtqueues have implicit notifications.
+ *
+ * The third argument is a "struct hv_ops" containing the
+ * put_chars() get_chars(), notifier_add() and notifier_del()
+ * pointers. The final argument is the output buffer size: we
+ * can do any size, so we put PAGE_SIZE here.
+ */
+ port->cons.vtermno = pdrvdata.next_vtermno;
+
+ port->cons.hvc = hvc_alloc(port->cons.vtermno, 0, &hv_ops, PAGE_SIZE);
+ if (IS_ERR(port->cons.hvc)) {
+ ret = PTR_ERR(port->cons.hvc);
+ dev_err(port->dev,
+ "error %d allocating hvc for port\n", ret);
+ port->cons.hvc = NULL;
+ return ret;
+ }
+ spin_lock_irq(&pdrvdata_lock);
+ pdrvdata.next_vtermno++;
+ list_add_tail(&port->cons.list, &pdrvdata.consoles);
+ spin_unlock_irq(&pdrvdata_lock);
+ port->guest_connected = true;
+
+ /* Notify host of port being opened */
+ send_control_msg(port, VIRTIO_CONSOLE_PORT_OPEN, 1);
+
+ return 0;
+}
+
+static ssize_t show_port_name(struct device *dev,
+ struct device_attribute *attr, char *buffer)
+{
+ struct port *port;
+
+ port = dev_get_drvdata(dev);
+
+ return sprintf(buffer, "%s\n", port->name);
+}
+
+static DEVICE_ATTR(name, S_IRUGO, show_port_name, NULL);
+
+static struct attribute *port_sysfs_entries[] = {
+ &dev_attr_name.attr,
+ NULL
+};
+
+static struct attribute_group port_attribute_group = {
+ .name = NULL, /* put in device directory */
+ .attrs = port_sysfs_entries,
+};
+
+static int debugfs_open(struct inode *inode, struct file *filp)
+{
+ filp->private_data = inode->i_private;
+ return 0;
+}
+
+static ssize_t debugfs_read(struct file *filp, char __user *ubuf,
+ size_t count, loff_t *offp)
+{
+ struct port *port;
+ char *buf;
+ ssize_t ret, out_offset, out_count;
+
+ out_count = 1024;
+ buf = kmalloc(out_count, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ port = filp->private_data;
+ out_offset = 0;
+ out_offset += snprintf(buf + out_offset, out_count,
+ "name: %s\n", port->name ? port->name : "");
+ out_offset += snprintf(buf + out_offset, out_count - out_offset,
+ "guest_connected: %d\n", port->guest_connected);
+ out_offset += snprintf(buf + out_offset, out_count - out_offset,
+ "host_connected: %d\n", port->host_connected);
+ out_offset += snprintf(buf + out_offset, out_count - out_offset,
+ "is_console: %s\n",
+ is_console_port(port) ? "yes" : "no");
+ out_offset += snprintf(buf + out_offset, out_count - out_offset,
+ "console_vtermno: %u\n", port->cons.vtermno);
+
+ ret = simple_read_from_buffer(ubuf, count, offp, buf, out_offset);
+ kfree(buf);
+ return ret;
+}
+
+static const struct file_operations port_debugfs_ops = {
+ .owner = THIS_MODULE,
+ .open = debugfs_open,
+ .read = debugfs_read,
+};
+
+/* Remove all port-specific data. */
+static int remove_port(struct port *port)
+{
+ struct port_buffer *buf;
+
+ spin_lock_irq(&port->portdev->ports_lock);
+ list_del(&port->list);
+ spin_unlock_irq(&port->portdev->ports_lock);
+
+ if (is_console_port(port)) {
+ spin_lock_irq(&pdrvdata_lock);
+ list_del(&port->cons.list);
+ spin_unlock_irq(&pdrvdata_lock);
+ hvc_remove(port->cons.hvc);
+ }
+ if (port->guest_connected)
+ send_control_msg(port, VIRTIO_CONSOLE_PORT_OPEN, 0);
+
+ sysfs_remove_group(&port->dev->kobj, &port_attribute_group);
+ device_destroy(pdrvdata.class, port->dev->devt);
+ cdev_del(&port->cdev);
+
+ /* Remove unused data this port might have received. */
+ discard_port_data(port);
+
+ /* Remove buffers we queued up for the Host to send us data in. */
+ while ((buf = port->in_vq->vq_ops->detach_unused_buf(port->in_vq)))
+ free_buf(buf);
+
+ kfree(port->name);
+
+ debugfs_remove(port->debugfs_file);
+
+ kfree(port);
+ return 0;
+}
+
+/* Any private messages that the Host and Guest want to share */
+static void handle_control_message(struct ports_device *portdev,
+ struct port_buffer *buf)
+{
+ struct virtio_console_control *cpkt;
+ struct port *port;
+ size_t name_size;
+ int err;
+
+ cpkt = (struct virtio_console_control *)(buf->buf + buf->offset);
+
+ port = find_port_by_id(portdev, cpkt->id);
+ if (!port) {
+ /* No valid header at start of buffer. Drop it. */
+ dev_dbg(&portdev->vdev->dev,
+ "Invalid index %u in control packet\n", cpkt->id);
+ return;
+ }
+
+ switch (cpkt->event) {
+ case VIRTIO_CONSOLE_CONSOLE_PORT:
+ if (!cpkt->value)
+ break;
+ if (is_console_port(port))
+ break;
+
+ init_port_console(port);
+ /*
+ * Could remove the port here in case init fails - but
+ * have to notify the host first.
+ */
+ break;
+ case VIRTIO_CONSOLE_RESIZE:
+ if (!is_console_port(port))
+ break;
+ port->cons.hvc->irq_requested = 1;
+ resize_console(port);
+ break;
+ case VIRTIO_CONSOLE_PORT_OPEN:
+ port->host_connected = cpkt->value;
+ wake_up_interruptible(&port->waitqueue);
+ break;
+ case VIRTIO_CONSOLE_PORT_NAME:
+ /*
+ * Skip the size of the header and the cpkt to get the size
+ * of the name that was sent
+ */
+ name_size = buf->len - buf->offset - sizeof(*cpkt) + 1;
+
+ port->name = kmalloc(name_size, GFP_KERNEL);
+ if (!port->name) {
+ dev_err(port->dev,
+ "Not enough space to store port name\n");
+ break;
+ }
+ strncpy(port->name, buf->buf + buf->offset + sizeof(*cpkt),
+ name_size - 1);
+ port->name[name_size - 1] = 0;
+
+ /*
+ * Since we only have one sysfs attribute, 'name',
+ * create it only if we have a name for the port.
+ */
+ err = sysfs_create_group(&port->dev->kobj,
+ &port_attribute_group);
+ if (err)
+ dev_err(port->dev,
+ "Error %d creating sysfs device attributes\n",
+ err);
+
+ break;
+ case VIRTIO_CONSOLE_PORT_REMOVE:
+ /*
+ * Hot unplug the port. We don't decrement nr_ports
+ * since we don't want to deal with extra complexities
+ * of using the lowest-available port id: We can just
+ * pick up the nr_ports number as the id and not have
+ * userspace send it to us. This helps us in two
+ * ways:
+ *
+ * - We don't need to have a 'port_id' field in the
+ * config space when a port is hot-added. This is a
+ * good thing as we might queue up multiple hotplug
+ * requests issued in our workqueue.
+ *
+ * - Another way to deal with this would have been to
+ * use a bitmap of the active ports and select the
+ * lowest non-active port from that map. That
+ * bloats the already tight config space and we
+ * would end up artificially limiting the
+ * max. number of ports to sizeof(bitmap). Right
+ * now we can support 2^32 ports (as the port id is
+ * stored in a u32 type).
+ *
+ */
+ remove_port(port);
+ break;
+ }
+}
+
+static void control_work_handler(struct work_struct *work)
+{
+ struct ports_device *portdev;
+ struct virtqueue *vq;
+ struct port_buffer *buf;
+ unsigned int len;
+
+ portdev = container_of(work, struct ports_device, control_work);
+ vq = portdev->c_ivq;
+
+ spin_lock(&portdev->cvq_lock);
+ while ((buf = vq->vq_ops->get_buf(vq, &len))) {
+ spin_unlock(&portdev->cvq_lock);
+
+ buf->len = len;
+ buf->offset = 0;
+
+ handle_control_message(portdev, buf);
+
+ spin_lock(&portdev->cvq_lock);
+ if (add_inbuf(portdev->c_ivq, buf) < 0) {
+ dev_warn(&portdev->vdev->dev,
+ "Error adding buffer to queue\n");
+ free_buf(buf);
+ }
+ }
+ spin_unlock(&portdev->cvq_lock);
+}
+
+static void in_intr(struct virtqueue *vq)
+{
+ struct port *port;
+ unsigned long flags;
+
+ port = find_port_by_vq(vq->vdev->priv, vq);
+ if (!port)
+ return;
+
+ spin_lock_irqsave(&port->inbuf_lock, flags);
+ if (!port->inbuf)
+ port->inbuf = get_inbuf(port);
+
+ /*
+ * Don't queue up data when port is closed. This condition
+ * can be reached when a console port is not yet connected (no
+ * tty is spawned) and the host sends out data to console
+ * ports. For generic serial ports, the host won't
+ * (shouldn't) send data till the guest is connected.
+ */
+ if (!port->guest_connected)
+ discard_port_data(port);
+
+ spin_unlock_irqrestore(&port->inbuf_lock, flags);
+
+ wake_up_interruptible(&port->waitqueue);
+
+ if (is_console_port(port) && hvc_poll(port->cons.hvc))
hvc_kick();
}
-/*D:370 Once we're further in boot, we get probed like any other virtio device.
- * At this stage we set up the output virtqueue.
- *
- * To set up and manage our virtual console, we call hvc_alloc(). Since we
- * never remove the console device we never need this pointer again.
- *
- * Finally we put our input buffer in the input queue, ready to receive. */
-static int __devinit virtcons_probe(struct virtio_device *dev)
+static void control_intr(struct virtqueue *vq)
{
- vq_callback_t *callbacks[] = { hvc_handle_input, NULL};
- const char *names[] = { "input", "output" };
- struct virtqueue *vqs[2];
+ struct ports_device *portdev;
+
+ portdev = vq->vdev->priv;
+ schedule_work(&portdev->control_work);
+}
+
+static void config_intr(struct virtio_device *vdev)
+{
+ struct ports_device *portdev;
+
+ portdev = vdev->priv;
+ if (use_multiport(portdev)) {
+ /* Handle port hot-add */
+ schedule_work(&portdev->config_work);
+ }
+ /*
+ * We'll use this way of resizing only for legacy support.
+ * For newer userspace (VIRTIO_CONSOLE_F_MULTPORT+), use
+ * control messages to indicate console size changes so that
+ * it can be done per-port
+ */
+ resize_console(find_port_by_id(portdev, 0));
+}
+
+static unsigned int fill_queue(struct virtqueue *vq, spinlock_t *lock)
+{
+ struct port_buffer *buf;
+ unsigned int ret;
int err;
- vdev = dev;
+ ret = 0;
+ do {
+ buf = alloc_buf(PAGE_SIZE);
+ if (!buf)
+ break;
- /* This is the scratch page we use to receive console input */
- inbuf = kmalloc(PAGE_SIZE, GFP_KERNEL);
- if (!inbuf) {
+ spin_lock_irq(lock);
+ err = add_inbuf(vq, buf);
+ if (err < 0) {
+ spin_unlock_irq(lock);
+ free_buf(buf);
+ break;
+ }
+ ret++;
+ spin_unlock_irq(lock);
+ } while (err > 0);
+
+ return ret;
+}
+
+static int add_port(struct ports_device *portdev, u32 id)
+{
+ char debugfs_name[16];
+ struct port *port;
+ struct port_buffer *buf;
+ dev_t devt;
+ int err;
+
+ port = kmalloc(sizeof(*port), GFP_KERNEL);
+ if (!port) {
err = -ENOMEM;
goto fail;
}
- /* Find the queues. */
- /* FIXME: This is why we want to wean off hvc: we do nothing
- * when input comes in. */
- err = vdev->config->find_vqs(vdev, 2, vqs, callbacks, names);
- if (err)
- goto free;
+ port->portdev = portdev;
+ port->id = id;
- in_vq = vqs[0];
- out_vq = vqs[1];
+ port->name = NULL;
+ port->inbuf = NULL;
+ port->cons.hvc = NULL;
- /* Start using the new console output. */
- virtio_cons.get_chars = get_chars;
- virtio_cons.put_chars = put_chars;
- virtio_cons.notifier_add = notifier_add_vio;
- virtio_cons.notifier_del = notifier_del_vio;
- virtio_cons.notifier_hangup = notifier_del_vio;
+ port->host_connected = port->guest_connected = false;
- /* The first argument of hvc_alloc() is the virtual console number, so
- * we use zero. The second argument is the parameter for the
- * notification mechanism (like irq number). We currently leave this
- * as zero, virtqueues have implicit notifications.
- *
- * The third argument is a "struct hv_ops" containing the put_chars()
- * get_chars(), notifier_add() and notifier_del() pointers.
- * The final argument is the output buffer size: we can do any size,
- * so we put PAGE_SIZE here. */
- hvc = hvc_alloc(0, 0, &virtio_cons, PAGE_SIZE);
- if (IS_ERR(hvc)) {
- err = PTR_ERR(hvc);
- goto free_vqs;
+ port->in_vq = portdev->in_vqs[port->id];
+ port->out_vq = portdev->out_vqs[port->id];
+
+ cdev_init(&port->cdev, &port_fops);
+
+ devt = MKDEV(portdev->chr_major, id);
+ err = cdev_add(&port->cdev, devt, 1);
+ if (err < 0) {
+ dev_err(&port->portdev->vdev->dev,
+ "Error %d adding cdev for port %u\n", err, id);
+ goto free_port;
+ }
+ port->dev = device_create(pdrvdata.class, &port->portdev->vdev->dev,
+ devt, port, "vport%up%u",
+ port->portdev->drv_index, id);
+ if (IS_ERR(port->dev)) {
+ err = PTR_ERR(port->dev);
+ dev_err(&port->portdev->vdev->dev,
+ "Error %d creating device for port %u\n",
+ err, id);
+ goto free_cdev;
}
- /* Register the input buffer the first time. */
- add_inbuf();
+ spin_lock_init(&port->inbuf_lock);
+ init_waitqueue_head(&port->waitqueue);
+
+ /* Fill the in_vq with buffers so the host can send us data. */
+ err = fill_queue(port->in_vq, &port->inbuf_lock);
+ if (!err) {
+ dev_err(port->dev, "Error allocating inbufs\n");
+ err = -ENOMEM;
+ goto free_device;
+ }
+
+ /*
+ * If we're not using multiport support, this has to be a console port
+ */
+ if (!use_multiport(port->portdev)) {
+ err = init_port_console(port);
+ if (err)
+ goto free_inbufs;
+ }
+
+ spin_lock_irq(&portdev->ports_lock);
+ list_add_tail(&port->list, &port->portdev->ports);
+ spin_unlock_irq(&portdev->ports_lock);
+
+ /*
+ * Tell the Host we're set so that it can send us various
+ * configuration parameters for this port (eg, port name,
+ * caching, whether this is a console port, etc.)
+ */
+ send_control_msg(port, VIRTIO_CONSOLE_PORT_READY, 1);
+
+ if (pdrvdata.debugfs_dir) {
+ /*
+ * Finally, create the debugfs file that we can use to
+ * inspect a port's state at any time
+ */
+ sprintf(debugfs_name, "vport%up%u",
+ port->portdev->drv_index, id);
+ port->debugfs_file = debugfs_create_file(debugfs_name, 0444,
+ pdrvdata.debugfs_dir,
+ port,
+ &port_debugfs_ops);
+ }
+ return 0;
+
+free_inbufs:
+ while ((buf = port->in_vq->vq_ops->detach_unused_buf(port->in_vq)))
+ free_buf(buf);
+free_device:
+ device_destroy(pdrvdata.class, port->dev->devt);
+free_cdev:
+ cdev_del(&port->cdev);
+free_port:
+ kfree(port);
+fail:
+ return err;
+}
+
+/*
+ * The workhandler for config-space updates.
+ *
+ * This is called when ports are hot-added.
+ */
+static void config_work_handler(struct work_struct *work)
+{
+ struct virtio_console_config virtconconf;
+ struct ports_device *portdev;
+ struct virtio_device *vdev;
+ int err;
+
+ portdev = container_of(work, struct ports_device, config_work);
+
+ vdev = portdev->vdev;
+ vdev->config->get(vdev,
+ offsetof(struct virtio_console_config, nr_ports),
+ &virtconconf.nr_ports,
+ sizeof(virtconconf.nr_ports));
+
+ if (portdev->config.nr_ports == virtconconf.nr_ports) {
+ /*
+ * Port 0 got hot-added. Since we already did all the
+ * other initialisation for it, just tell the Host
+ * that the port is ready if we find the port. In
+ * case the port was hot-removed earlier, we call
+ * add_port to add the port.
+ */
+ struct port *port;
+
+ port = find_port_by_id(portdev, 0);
+ if (!port)
+ add_port(portdev, 0);
+ else
+ send_control_msg(port, VIRTIO_CONSOLE_PORT_READY, 1);
+ return;
+ }
+ if (virtconconf.nr_ports > portdev->config.max_nr_ports) {
+ dev_warn(&vdev->dev,
+ "More ports specified (%u) than allowed (%u)",
+ portdev->config.nr_ports + 1,
+ portdev->config.max_nr_ports);
+ return;
+ }
+ if (virtconconf.nr_ports < portdev->config.nr_ports)
+ return;
+
+ /* Hot-add ports */
+ while (virtconconf.nr_ports - portdev->config.nr_ports) {
+ err = add_port(portdev, portdev->config.nr_ports);
+ if (err)
+ break;
+ portdev->config.nr_ports++;
+ }
+}
+
+static int init_vqs(struct ports_device *portdev)
+{
+ vq_callback_t **io_callbacks;
+ char **io_names;
+ struct virtqueue **vqs;
+ u32 i, j, nr_ports, nr_queues;
+ int err;
+
+ nr_ports = portdev->config.max_nr_ports;
+ nr_queues = use_multiport(portdev) ? (nr_ports + 1) * 2 : 2;
+
+ vqs = kmalloc(nr_queues * sizeof(struct virtqueue *), GFP_KERNEL);
+ if (!vqs) {
+ err = -ENOMEM;
+ goto fail;
+ }
+ io_callbacks = kmalloc(nr_queues * sizeof(vq_callback_t *), GFP_KERNEL);
+ if (!io_callbacks) {
+ err = -ENOMEM;
+ goto free_vqs;
+ }
+ io_names = kmalloc(nr_queues * sizeof(char *), GFP_KERNEL);
+ if (!io_names) {
+ err = -ENOMEM;
+ goto free_callbacks;
+ }
+ portdev->in_vqs = kmalloc(nr_ports * sizeof(struct virtqueue *),
+ GFP_KERNEL);
+ if (!portdev->in_vqs) {
+ err = -ENOMEM;
+ goto free_names;
+ }
+ portdev->out_vqs = kmalloc(nr_ports * sizeof(struct virtqueue *),
+ GFP_KERNEL);
+ if (!portdev->out_vqs) {
+ err = -ENOMEM;
+ goto free_invqs;
+ }
+
+ /*
+ * For backward compat (newer host but older guest), the host
+ * spawns a console port first and also inits the vqs for port
+ * 0 before others.
+ */
+ j = 0;
+ io_callbacks[j] = in_intr;
+ io_callbacks[j + 1] = NULL;
+ io_names[j] = "input";
+ io_names[j + 1] = "output";
+ j += 2;
+
+ if (use_multiport(portdev)) {
+ io_callbacks[j] = control_intr;
+ io_callbacks[j + 1] = NULL;
+ io_names[j] = "control-i";
+ io_names[j + 1] = "control-o";
+
+ for (i = 1; i < nr_ports; i++) {
+ j += 2;
+ io_callbacks[j] = in_intr;
+ io_callbacks[j + 1] = NULL;
+ io_names[j] = "input";
+ io_names[j + 1] = "output";
+ }
+ }
+ /* Find the queues. */
+ err = portdev->vdev->config->find_vqs(portdev->vdev, nr_queues, vqs,
+ io_callbacks,
+ (const char **)io_names);
+ if (err)
+ goto free_outvqs;
+
+ j = 0;
+ portdev->in_vqs[0] = vqs[0];
+ portdev->out_vqs[0] = vqs[1];
+ j += 2;
+ if (use_multiport(portdev)) {
+ portdev->c_ivq = vqs[j];
+ portdev->c_ovq = vqs[j + 1];
+
+ for (i = 1; i < nr_ports; i++) {
+ j += 2;
+ portdev->in_vqs[i] = vqs[j];
+ portdev->out_vqs[i] = vqs[j + 1];
+ }
+ }
+ kfree(io_callbacks);
+ kfree(io_names);
+ kfree(vqs);
+
+ return 0;
+
+free_names:
+ kfree(io_names);
+free_callbacks:
+ kfree(io_callbacks);
+free_outvqs:
+ kfree(portdev->out_vqs);
+free_invqs:
+ kfree(portdev->in_vqs);
+free_vqs:
+ kfree(vqs);
+fail:
+ return err;
+}
+
+static const struct file_operations portdev_fops = {
+ .owner = THIS_MODULE,
+};
+
+/*
+ * Once we're further in boot, we get probed like any other virtio
+ * device.
+ *
+ * If the host also supports multiple console ports, we check the
+ * config space to see how many ports the host has spawned. We
+ * initialize each port found.
+ */
+static int __devinit virtcons_probe(struct virtio_device *vdev)
+{
+ struct ports_device *portdev;
+ u32 i;
+ int err;
+ bool multiport;
+
+ portdev = kmalloc(sizeof(*portdev), GFP_KERNEL);
+ if (!portdev) {
+ err = -ENOMEM;
+ goto fail;
+ }
+
+ /* Attach this portdev to this virtio_device, and vice-versa. */
+ portdev->vdev = vdev;
+ vdev->priv = portdev;
+
+ spin_lock_irq(&pdrvdata_lock);
+ portdev->drv_index = pdrvdata.index++;
+ spin_unlock_irq(&pdrvdata_lock);
+
+ portdev->chr_major = register_chrdev(0, "virtio-portsdev",
+ &portdev_fops);
+ if (portdev->chr_major < 0) {
+ dev_err(&vdev->dev,
+ "Error %d registering chrdev for device %u\n",
+ portdev->chr_major, portdev->drv_index);
+ err = portdev->chr_major;
+ goto free;
+ }
+
+ multiport = false;
+ portdev->config.nr_ports = 1;
+ portdev->config.max_nr_ports = 1;
+ if (virtio_has_feature(vdev, VIRTIO_CONSOLE_F_MULTIPORT)) {
+ multiport = true;
+ vdev->features[0] |= 1 << VIRTIO_CONSOLE_F_MULTIPORT;
+
+ vdev->config->get(vdev, offsetof(struct virtio_console_config,
+ nr_ports),
+ &portdev->config.nr_ports,
+ sizeof(portdev->config.nr_ports));
+ vdev->config->get(vdev, offsetof(struct virtio_console_config,
+ max_nr_ports),
+ &portdev->config.max_nr_ports,
+ sizeof(portdev->config.max_nr_ports));
+ if (portdev->config.nr_ports > portdev->config.max_nr_ports) {
+ dev_warn(&vdev->dev,
+ "More ports (%u) specified than allowed (%u). Will init %u ports.",
+ portdev->config.nr_ports,
+ portdev->config.max_nr_ports,
+ portdev->config.max_nr_ports);
+
+ portdev->config.nr_ports = portdev->config.max_nr_ports;
+ }
+ }
+
+ /* Let the Host know we support multiple ports.*/
+ vdev->config->finalize_features(vdev);
+
+ err = init_vqs(portdev);
+ if (err < 0) {
+ dev_err(&vdev->dev, "Error %d initializing vqs\n", err);
+ goto free_chrdev;
+ }
+
+ spin_lock_init(&portdev->ports_lock);
+ INIT_LIST_HEAD(&portdev->ports);
+
+ if (multiport) {
+ spin_lock_init(&portdev->cvq_lock);
+ INIT_WORK(&portdev->control_work, &control_work_handler);
+ INIT_WORK(&portdev->config_work, &config_work_handler);
+
+ err = fill_queue(portdev->c_ivq, &portdev->cvq_lock);
+ if (!err) {
+ dev_err(&vdev->dev,
+ "Error allocating buffers for control queue\n");
+ err = -ENOMEM;
+ goto free_vqs;
+ }
+ }
+
+ for (i = 0; i < portdev->config.nr_ports; i++)
+ add_port(portdev, i);
+
+ /* Start using the new console output. */
+ early_put_chars = NULL;
return 0;
free_vqs:
vdev->config->del_vqs(vdev);
+ kfree(portdev->in_vqs);
+ kfree(portdev->out_vqs);
+free_chrdev:
+ unregister_chrdev(portdev->chr_major, "virtio-portsdev");
free:
- kfree(inbuf);
+ kfree(portdev);
fail:
return err;
}
+static void virtcons_remove(struct virtio_device *vdev)
+{
+ struct ports_device *portdev;
+ struct port *port, *port2;
+ struct port_buffer *buf;
+ unsigned int len;
+
+ portdev = vdev->priv;
+
+ cancel_work_sync(&portdev->control_work);
+ cancel_work_sync(&portdev->config_work);
+
+ list_for_each_entry_safe(port, port2, &portdev->ports, list)
+ remove_port(port);
+
+ unregister_chrdev(portdev->chr_major, "virtio-portsdev");
+
+ while ((buf = portdev->c_ivq->vq_ops->get_buf(portdev->c_ivq, &len)))
+ free_buf(buf);
+
+ while ((buf = portdev->c_ivq->vq_ops->detach_unused_buf(portdev->c_ivq)))
+ free_buf(buf);
+
+ vdev->config->del_vqs(vdev);
+ kfree(portdev->in_vqs);
+ kfree(portdev->out_vqs);
+
+ kfree(portdev);
+}
+
static struct virtio_device_id id_table[] = {
{ VIRTIO_ID_CONSOLE, VIRTIO_DEV_ANY_ID },
{ 0 },
@@ -253,6 +1511,7 @@
static unsigned int features[] = {
VIRTIO_CONSOLE_F_SIZE,
+ VIRTIO_CONSOLE_F_MULTIPORT,
};
static struct virtio_driver virtio_console = {
@@ -262,14 +1521,41 @@
.driver.owner = THIS_MODULE,
.id_table = id_table,
.probe = virtcons_probe,
- .config_changed = virtcons_apply_config,
+ .remove = virtcons_remove,
+ .config_changed = config_intr,
};
static int __init init(void)
{
+ int err;
+
+ pdrvdata.class = class_create(THIS_MODULE, "virtio-ports");
+ if (IS_ERR(pdrvdata.class)) {
+ err = PTR_ERR(pdrvdata.class);
+ pr_err("Error %d creating virtio-ports class\n", err);
+ return err;
+ }
+
+ pdrvdata.debugfs_dir = debugfs_create_dir("virtio-ports", NULL);
+ if (!pdrvdata.debugfs_dir) {
+ pr_warning("Error %ld creating debugfs dir for virtio-ports\n",
+ PTR_ERR(pdrvdata.debugfs_dir));
+ }
+ INIT_LIST_HEAD(&pdrvdata.consoles);
+
return register_virtio_driver(&virtio_console);
}
+
+static void __exit fini(void)
+{
+ unregister_virtio_driver(&virtio_console);
+
+ class_destroy(pdrvdata.class);
+ if (pdrvdata.debugfs_dir)
+ debugfs_remove_recursive(pdrvdata.debugfs_dir);
+}
module_init(init);
+module_exit(fini);
MODULE_DEVICE_TABLE(virtio, id_table);
MODULE_DESCRIPTION("Virtio console driver");
diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c
index 6b3e0c2..6fe4f77 100644
--- a/drivers/clocksource/sh_cmt.c
+++ b/drivers/clocksource/sh_cmt.c
@@ -603,18 +603,13 @@
p->irqaction.handler = sh_cmt_interrupt;
p->irqaction.dev_id = p;
p->irqaction.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL;
- ret = setup_irq(irq, &p->irqaction);
- if (ret) {
- pr_err("sh_cmt: failed to request irq %d\n", irq);
- goto err1;
- }
/* get hold of clock */
p->clk = clk_get(&p->pdev->dev, cfg->clk);
if (IS_ERR(p->clk)) {
pr_err("sh_cmt: cannot get clock \"%s\"\n", cfg->clk);
ret = PTR_ERR(p->clk);
- goto err2;
+ goto err1;
}
if (resource_size(res) == 6) {
@@ -627,14 +622,25 @@
p->clear_bits = ~0xc000;
}
- return sh_cmt_register(p, cfg->name,
- cfg->clockevent_rating,
- cfg->clocksource_rating);
- err2:
- remove_irq(irq, &p->irqaction);
- err1:
+ ret = sh_cmt_register(p, cfg->name,
+ cfg->clockevent_rating,
+ cfg->clocksource_rating);
+ if (ret) {
+ pr_err("sh_cmt: registration failed\n");
+ goto err1;
+ }
+
+ ret = setup_irq(irq, &p->irqaction);
+ if (ret) {
+ pr_err("sh_cmt: failed to request irq %d\n", irq);
+ goto err1;
+ }
+
+ return 0;
+
+err1:
iounmap(p->mapbase);
- err0:
+err0:
return ret;
}
diff --git a/drivers/clocksource/sh_mtu2.c b/drivers/clocksource/sh_mtu2.c
index 973e714..4c8a759 100644
--- a/drivers/clocksource/sh_mtu2.c
+++ b/drivers/clocksource/sh_mtu2.c
@@ -221,15 +221,15 @@
ced->cpumask = cpumask_of(0);
ced->set_mode = sh_mtu2_clock_event_mode;
+ pr_info("sh_mtu2: %s used for clock events\n", ced->name);
+ clockevents_register_device(ced);
+
ret = setup_irq(p->irqaction.irq, &p->irqaction);
if (ret) {
pr_err("sh_mtu2: failed to request irq %d\n",
p->irqaction.irq);
return;
}
-
- pr_info("sh_mtu2: %s used for clock events\n", ced->name);
- clockevents_register_device(ced);
}
static int sh_mtu2_register(struct sh_mtu2_priv *p, char *name,
diff --git a/drivers/clocksource/sh_tmu.c b/drivers/clocksource/sh_tmu.c
index 93c2322..961f5b5 100644
--- a/drivers/clocksource/sh_tmu.c
+++ b/drivers/clocksource/sh_tmu.c
@@ -323,15 +323,15 @@
ced->set_next_event = sh_tmu_clock_event_next;
ced->set_mode = sh_tmu_clock_event_mode;
+ pr_info("sh_tmu: %s used for clock events\n", ced->name);
+ clockevents_register_device(ced);
+
ret = setup_irq(p->irqaction.irq, &p->irqaction);
if (ret) {
pr_err("sh_tmu: failed to request irq %d\n",
p->irqaction.irq);
return;
}
-
- pr_info("sh_tmu: %s used for clock events\n", ced->name);
- clockevents_register_device(ced);
}
static int sh_tmu_register(struct sh_tmu_priv *p, char *name,
diff --git a/drivers/crypto/amcc/crypto4xx_core.c b/drivers/crypto/amcc/crypto4xx_core.c
index 46e899a..1c3849f 100644
--- a/drivers/crypto/amcc/crypto4xx_core.c
+++ b/drivers/crypto/amcc/crypto4xx_core.c
@@ -1274,7 +1274,7 @@
return 0;
}
-static struct of_device_id crypto4xx_match[] = {
+static const struct of_device_id crypto4xx_match[] = {
{ .compatible = "amcc,ppc4xx-crypto",},
{ },
};
diff --git a/drivers/crypto/geode-aes.c b/drivers/crypto/geode-aes.c
index 48011629..c7a5a43 100644
--- a/drivers/crypto/geode-aes.c
+++ b/drivers/crypto/geode-aes.c
@@ -135,13 +135,13 @@
/*
* The requested key size is not supported by HW, do a fallback
*/
- op->fallback.blk->base.crt_flags &= ~CRYPTO_TFM_REQ_MASK;
- op->fallback.blk->base.crt_flags |= (tfm->crt_flags & CRYPTO_TFM_REQ_MASK);
+ op->fallback.cip->base.crt_flags &= ~CRYPTO_TFM_REQ_MASK;
+ op->fallback.cip->base.crt_flags |= (tfm->crt_flags & CRYPTO_TFM_REQ_MASK);
ret = crypto_cipher_setkey(op->fallback.cip, key, len);
if (ret) {
tfm->crt_flags &= ~CRYPTO_TFM_RES_MASK;
- tfm->crt_flags |= (op->fallback.blk->base.crt_flags & CRYPTO_TFM_RES_MASK);
+ tfm->crt_flags |= (op->fallback.cip->base.crt_flags & CRYPTO_TFM_RES_MASK);
}
return ret;
}
@@ -263,7 +263,7 @@
if (IS_ERR(op->fallback.cip)) {
printk(KERN_ERR "Error allocating fallback algo %s\n", name);
- return PTR_ERR(op->fallback.blk);
+ return PTR_ERR(op->fallback.cip);
}
return 0;
diff --git a/drivers/crypto/talitos.c b/drivers/crypto/talitos.c
index c47ffe8..fd529d6 100644
--- a/drivers/crypto/talitos.c
+++ b/drivers/crypto/talitos.c
@@ -1958,7 +1958,7 @@
return err;
}
-static struct of_device_id talitos_match[] = {
+static const struct of_device_id talitos_match[] = {
{
.compatible = "fsl,sec2.0",
},
diff --git a/drivers/dma/shdma.c b/drivers/dma/shdma.c
index d10cc89..b75ce8b 100644
--- a/drivers/dma/shdma.c
+++ b/drivers/dma/shdma.c
@@ -48,23 +48,20 @@
*/
#define RS_DEFAULT (RS_DUAL)
+/* A bitmask with bits enough for enum sh_dmae_slave_chan_id */
+static unsigned long sh_dmae_slave_used[BITS_TO_LONGS(SHDMA_SLAVE_NUMBER)];
+
static void sh_dmae_chan_ld_cleanup(struct sh_dmae_chan *sh_chan, bool all);
#define SH_DMAC_CHAN_BASE(id) (dma_base_addr[id])
static void sh_dmae_writel(struct sh_dmae_chan *sh_dc, u32 data, u32 reg)
{
- ctrl_outl(data, (SH_DMAC_CHAN_BASE(sh_dc->id) + reg));
+ ctrl_outl(data, SH_DMAC_CHAN_BASE(sh_dc->id) + reg);
}
static u32 sh_dmae_readl(struct sh_dmae_chan *sh_dc, u32 reg)
{
- return ctrl_inl((SH_DMAC_CHAN_BASE(sh_dc->id) + reg));
-}
-
-static void dmae_init(struct sh_dmae_chan *sh_chan)
-{
- u32 chcr = RS_DEFAULT; /* default is DUAL mode */
- sh_dmae_writel(sh_chan, chcr, CHCR);
+ return ctrl_inl(SH_DMAC_CHAN_BASE(sh_dc->id) + reg);
}
/*
@@ -95,27 +92,30 @@
return 0;
}
-static int dmae_is_busy(struct sh_dmae_chan *sh_chan)
+static bool dmae_is_busy(struct sh_dmae_chan *sh_chan)
{
u32 chcr = sh_dmae_readl(sh_chan, CHCR);
- if (chcr & CHCR_DE) {
- if (!(chcr & CHCR_TE))
- return -EBUSY; /* working */
- }
- return 0; /* waiting */
+
+ if ((chcr & (CHCR_DE | CHCR_TE)) == CHCR_DE)
+ return true; /* working */
+
+ return false; /* waiting */
}
-static inline unsigned int calc_xmit_shift(struct sh_dmae_chan *sh_chan)
+static unsigned int ts_shift[] = TS_SHIFT;
+static inline unsigned int calc_xmit_shift(u32 chcr)
{
- u32 chcr = sh_dmae_readl(sh_chan, CHCR);
- return ts_shift[(chcr & CHCR_TS_MASK) >> CHCR_TS_SHIFT];
+ int cnt = ((chcr & CHCR_TS_LOW_MASK) >> CHCR_TS_LOW_SHIFT) |
+ ((chcr & CHCR_TS_HIGH_MASK) >> CHCR_TS_HIGH_SHIFT);
+
+ return ts_shift[cnt];
}
static void dmae_set_reg(struct sh_dmae_chan *sh_chan, struct sh_dmae_regs *hw)
{
sh_dmae_writel(sh_chan, hw->sar, SAR);
sh_dmae_writel(sh_chan, hw->dar, DAR);
- sh_dmae_writel(sh_chan, hw->tcr >> calc_xmit_shift(sh_chan), TCR);
+ sh_dmae_writel(sh_chan, hw->tcr >> sh_chan->xmit_shift, TCR);
}
static void dmae_start(struct sh_dmae_chan *sh_chan)
@@ -123,7 +123,7 @@
u32 chcr = sh_dmae_readl(sh_chan, CHCR);
chcr |= CHCR_DE | CHCR_IE;
- sh_dmae_writel(sh_chan, chcr, CHCR);
+ sh_dmae_writel(sh_chan, chcr & ~CHCR_TE, CHCR);
}
static void dmae_halt(struct sh_dmae_chan *sh_chan)
@@ -134,55 +134,50 @@
sh_dmae_writel(sh_chan, chcr, CHCR);
}
+static void dmae_init(struct sh_dmae_chan *sh_chan)
+{
+ u32 chcr = RS_DEFAULT; /* default is DUAL mode */
+ sh_chan->xmit_shift = calc_xmit_shift(chcr);
+ sh_dmae_writel(sh_chan, chcr, CHCR);
+}
+
static int dmae_set_chcr(struct sh_dmae_chan *sh_chan, u32 val)
{
- int ret = dmae_is_busy(sh_chan);
/* When DMA was working, can not set data to CHCR */
- if (ret)
- return ret;
+ if (dmae_is_busy(sh_chan))
+ return -EBUSY;
+ sh_chan->xmit_shift = calc_xmit_shift(val);
sh_dmae_writel(sh_chan, val, CHCR);
+
return 0;
}
-#define DMARS1_ADDR 0x04
-#define DMARS2_ADDR 0x08
-#define DMARS_SHIFT 8
-#define DMARS_CHAN_MSK 0x01
+#define DMARS_SHIFT 8
+#define DMARS_CHAN_MSK 0x01
static int dmae_set_dmars(struct sh_dmae_chan *sh_chan, u16 val)
{
u32 addr;
int shift = 0;
- int ret = dmae_is_busy(sh_chan);
- if (ret)
- return ret;
+
+ if (dmae_is_busy(sh_chan))
+ return -EBUSY;
if (sh_chan->id & DMARS_CHAN_MSK)
shift = DMARS_SHIFT;
- switch (sh_chan->id) {
- /* DMARS0 */
- case 0:
- case 1:
- addr = SH_DMARS_BASE;
- break;
- /* DMARS1 */
- case 2:
- case 3:
- addr = (SH_DMARS_BASE + DMARS1_ADDR);
- break;
- /* DMARS2 */
- case 4:
- case 5:
- addr = (SH_DMARS_BASE + DMARS2_ADDR);
- break;
- default:
+ if (sh_chan->id < 6)
+ /* DMA0RS0 - DMA0RS2 */
+ addr = SH_DMARS_BASE0 + (sh_chan->id / 2) * 4;
+#ifdef SH_DMARS_BASE1
+ else if (sh_chan->id < 12)
+ /* DMA1RS0 - DMA1RS2 */
+ addr = SH_DMARS_BASE1 + ((sh_chan->id - 6) / 2) * 4;
+#endif
+ else
return -EINVAL;
- }
- ctrl_outw((val << shift) |
- (ctrl_inw(addr) & (shift ? 0xFF00 : 0x00FF)),
- addr);
+ ctrl_outw((val << shift) | (ctrl_inw(addr) & (0xFF00 >> shift)), addr);
return 0;
}
@@ -250,10 +245,53 @@
return NULL;
}
+static struct sh_dmae_slave_config *sh_dmae_find_slave(
+ struct sh_dmae_chan *sh_chan, enum sh_dmae_slave_chan_id slave_id)
+{
+ struct dma_device *dma_dev = sh_chan->common.device;
+ struct sh_dmae_device *shdev = container_of(dma_dev,
+ struct sh_dmae_device, common);
+ struct sh_dmae_pdata *pdata = &shdev->pdata;
+ int i;
+
+ if ((unsigned)slave_id >= SHDMA_SLAVE_NUMBER)
+ return NULL;
+
+ for (i = 0; i < pdata->config_num; i++)
+ if (pdata->config[i].slave_id == slave_id)
+ return pdata->config + i;
+
+ return NULL;
+}
+
static int sh_dmae_alloc_chan_resources(struct dma_chan *chan)
{
struct sh_dmae_chan *sh_chan = to_sh_chan(chan);
struct sh_desc *desc;
+ struct sh_dmae_slave *param = chan->private;
+
+ /*
+ * This relies on the guarantee from dmaengine that alloc_chan_resources
+ * never runs concurrently with itself or free_chan_resources.
+ */
+ if (param) {
+ struct sh_dmae_slave_config *cfg;
+
+ cfg = sh_dmae_find_slave(sh_chan, param->slave_id);
+ if (!cfg)
+ return -EINVAL;
+
+ if (test_and_set_bit(param->slave_id, sh_dmae_slave_used))
+ return -EBUSY;
+
+ param->config = cfg;
+
+ dmae_set_dmars(sh_chan, cfg->mid_rid);
+ dmae_set_chcr(sh_chan, cfg->chcr);
+ } else {
+ if ((sh_dmae_readl(sh_chan, CHCR) & 0x700) != 0x400)
+ dmae_set_chcr(sh_chan, RS_DEFAULT);
+ }
spin_lock_bh(&sh_chan->desc_lock);
while (sh_chan->descs_allocated < NR_DESCS_PER_CHANNEL) {
@@ -286,10 +324,18 @@
struct sh_desc *desc, *_desc;
LIST_HEAD(list);
+ dmae_halt(sh_chan);
+
/* Prepared and not submitted descriptors can still be on the queue */
if (!list_empty(&sh_chan->ld_queue))
sh_dmae_chan_ld_cleanup(sh_chan, true);
+ if (chan->private) {
+ /* The caller is holding dma_list_mutex */
+ struct sh_dmae_slave *param = chan->private;
+ clear_bit(param->slave_id, sh_dmae_slave_used);
+ }
+
spin_lock_bh(&sh_chan->desc_lock);
list_splice_init(&sh_chan->ld_free, &list);
@@ -301,23 +347,97 @@
kfree(desc);
}
-static struct dma_async_tx_descriptor *sh_dmae_prep_memcpy(
- struct dma_chan *chan, dma_addr_t dma_dest, dma_addr_t dma_src,
- size_t len, unsigned long flags)
+/**
+ * sh_dmae_add_desc - get, set up and return one transfer descriptor
+ * @sh_chan: DMA channel
+ * @flags: DMA transfer flags
+ * @dest: destination DMA address, incremented when direction equals
+ * DMA_FROM_DEVICE or DMA_BIDIRECTIONAL
+ * @src: source DMA address, incremented when direction equals
+ * DMA_TO_DEVICE or DMA_BIDIRECTIONAL
+ * @len: DMA transfer length
+ * @first: if NULL, set to the current descriptor and cookie set to -EBUSY
+ * @direction: needed for slave DMA to decide which address to keep constant,
+ * equals DMA_BIDIRECTIONAL for MEMCPY
+ * Returns 0 or an error
+ * Locks: called with desc_lock held
+ */
+static struct sh_desc *sh_dmae_add_desc(struct sh_dmae_chan *sh_chan,
+ unsigned long flags, dma_addr_t *dest, dma_addr_t *src, size_t *len,
+ struct sh_desc **first, enum dma_data_direction direction)
{
- struct sh_dmae_chan *sh_chan;
- struct sh_desc *first = NULL, *prev = NULL, *new;
+ struct sh_desc *new;
size_t copy_size;
+
+ if (!*len)
+ return NULL;
+
+ /* Allocate the link descriptor from the free list */
+ new = sh_dmae_get_desc(sh_chan);
+ if (!new) {
+ dev_err(sh_chan->dev, "No free link descriptor available\n");
+ return NULL;
+ }
+
+ copy_size = min(*len, (size_t)SH_DMA_TCR_MAX + 1);
+
+ new->hw.sar = *src;
+ new->hw.dar = *dest;
+ new->hw.tcr = copy_size;
+
+ if (!*first) {
+ /* First desc */
+ new->async_tx.cookie = -EBUSY;
+ *first = new;
+ } else {
+ /* Other desc - invisible to the user */
+ new->async_tx.cookie = -EINVAL;
+ }
+
+ dev_dbg(sh_chan->dev,
+ "chaining (%u/%u)@%x -> %x with %p, cookie %d, shift %d\n",
+ copy_size, *len, *src, *dest, &new->async_tx,
+ new->async_tx.cookie, sh_chan->xmit_shift);
+
+ new->mark = DESC_PREPARED;
+ new->async_tx.flags = flags;
+ new->direction = direction;
+
+ *len -= copy_size;
+ if (direction == DMA_BIDIRECTIONAL || direction == DMA_TO_DEVICE)
+ *src += copy_size;
+ if (direction == DMA_BIDIRECTIONAL || direction == DMA_FROM_DEVICE)
+ *dest += copy_size;
+
+ return new;
+}
+
+/*
+ * sh_dmae_prep_sg - prepare transfer descriptors from an SG list
+ *
+ * Common routine for public (MEMCPY) and slave DMA. The MEMCPY case is also
+ * converted to scatter-gather to guarantee consistent locking and a correct
+ * list manipulation. For slave DMA direction carries the usual meaning, and,
+ * logically, the SG list is RAM and the addr variable contains slave address,
+ * e.g., the FIFO I/O register. For MEMCPY direction equals DMA_BIDIRECTIONAL
+ * and the SG list contains only one element and points at the source buffer.
+ */
+static struct dma_async_tx_descriptor *sh_dmae_prep_sg(struct sh_dmae_chan *sh_chan,
+ struct scatterlist *sgl, unsigned int sg_len, dma_addr_t *addr,
+ enum dma_data_direction direction, unsigned long flags)
+{
+ struct scatterlist *sg;
+ struct sh_desc *first = NULL, *new = NULL /* compiler... */;
LIST_HEAD(tx_list);
- int chunks = (len + SH_DMA_TCR_MAX) / (SH_DMA_TCR_MAX + 1);
+ int chunks = 0;
+ int i;
- if (!chan)
+ if (!sg_len)
return NULL;
- if (!len)
- return NULL;
-
- sh_chan = to_sh_chan(chan);
+ for_each_sg(sgl, sg, sg_len, i)
+ chunks += (sg_dma_len(sg) + SH_DMA_TCR_MAX) /
+ (SH_DMA_TCR_MAX + 1);
/* Have to lock the whole loop to protect against concurrent release */
spin_lock_bh(&sh_chan->desc_lock);
@@ -333,49 +453,32 @@
* only during this function, then they are immediately spliced
* back onto the free list in form of a chain
*/
- do {
- /* Allocate the link descriptor from the free list */
- new = sh_dmae_get_desc(sh_chan);
- if (!new) {
- dev_err(sh_chan->dev,
- "No free memory for link descriptor\n");
- list_for_each_entry(new, &tx_list, node)
- new->mark = DESC_IDLE;
- list_splice(&tx_list, &sh_chan->ld_free);
- spin_unlock_bh(&sh_chan->desc_lock);
- return NULL;
- }
+ for_each_sg(sgl, sg, sg_len, i) {
+ dma_addr_t sg_addr = sg_dma_address(sg);
+ size_t len = sg_dma_len(sg);
- copy_size = min(len, (size_t)SH_DMA_TCR_MAX + 1);
+ if (!len)
+ goto err_get_desc;
- new->hw.sar = dma_src;
- new->hw.dar = dma_dest;
- new->hw.tcr = copy_size;
- if (!first) {
- /* First desc */
- new->async_tx.cookie = -EBUSY;
- first = new;
- } else {
- /* Other desc - invisible to the user */
- new->async_tx.cookie = -EINVAL;
- }
+ do {
+ dev_dbg(sh_chan->dev, "Add SG #%d@%p[%d], dma %llx\n",
+ i, sg, len, (unsigned long long)sg_addr);
- dev_dbg(sh_chan->dev,
- "chaining %u of %u with %p, dst %x, cookie %d\n",
- copy_size, len, &new->async_tx, dma_dest,
- new->async_tx.cookie);
+ if (direction == DMA_FROM_DEVICE)
+ new = sh_dmae_add_desc(sh_chan, flags,
+ &sg_addr, addr, &len, &first,
+ direction);
+ else
+ new = sh_dmae_add_desc(sh_chan, flags,
+ addr, &sg_addr, &len, &first,
+ direction);
+ if (!new)
+ goto err_get_desc;
- new->mark = DESC_PREPARED;
- new->async_tx.flags = flags;
- new->chunks = chunks--;
-
- prev = new;
- len -= copy_size;
- dma_src += copy_size;
- dma_dest += copy_size;
- /* Insert the link descriptor to the LD ring */
- list_add_tail(&new->node, &tx_list);
- } while (len);
+ new->chunks = chunks--;
+ list_add_tail(&new->node, &tx_list);
+ } while (len);
+ }
if (new != first)
new->async_tx.cookie = -ENOSPC;
@@ -386,6 +489,77 @@
spin_unlock_bh(&sh_chan->desc_lock);
return &first->async_tx;
+
+err_get_desc:
+ list_for_each_entry(new, &tx_list, node)
+ new->mark = DESC_IDLE;
+ list_splice(&tx_list, &sh_chan->ld_free);
+
+ spin_unlock_bh(&sh_chan->desc_lock);
+
+ return NULL;
+}
+
+static struct dma_async_tx_descriptor *sh_dmae_prep_memcpy(
+ struct dma_chan *chan, dma_addr_t dma_dest, dma_addr_t dma_src,
+ size_t len, unsigned long flags)
+{
+ struct sh_dmae_chan *sh_chan;
+ struct scatterlist sg;
+
+ if (!chan || !len)
+ return NULL;
+
+ chan->private = NULL;
+
+ sh_chan = to_sh_chan(chan);
+
+ sg_init_table(&sg, 1);
+ sg_set_page(&sg, pfn_to_page(PFN_DOWN(dma_src)), len,
+ offset_in_page(dma_src));
+ sg_dma_address(&sg) = dma_src;
+ sg_dma_len(&sg) = len;
+
+ return sh_dmae_prep_sg(sh_chan, &sg, 1, &dma_dest, DMA_BIDIRECTIONAL,
+ flags);
+}
+
+static struct dma_async_tx_descriptor *sh_dmae_prep_slave_sg(
+ struct dma_chan *chan, struct scatterlist *sgl, unsigned int sg_len,
+ enum dma_data_direction direction, unsigned long flags)
+{
+ struct sh_dmae_slave *param;
+ struct sh_dmae_chan *sh_chan;
+
+ if (!chan)
+ return NULL;
+
+ sh_chan = to_sh_chan(chan);
+ param = chan->private;
+
+ /* Someone calling slave DMA on a public channel? */
+ if (!param || !sg_len) {
+ dev_warn(sh_chan->dev, "%s: bad parameter: %p, %d, %d\n",
+ __func__, param, sg_len, param ? param->slave_id : -1);
+ return NULL;
+ }
+
+ /*
+ * if (param != NULL), this is a successfully requested slave channel,
+ * therefore param->config != NULL too.
+ */
+ return sh_dmae_prep_sg(sh_chan, sgl, sg_len, ¶m->config->addr,
+ direction, flags);
+}
+
+static void sh_dmae_terminate_all(struct dma_chan *chan)
+{
+ struct sh_dmae_chan *sh_chan = to_sh_chan(chan);
+
+ if (!chan)
+ return;
+
+ sh_dmae_chan_ld_cleanup(sh_chan, true);
}
static dma_async_tx_callback __ld_cleanup(struct sh_dmae_chan *sh_chan, bool all)
@@ -419,7 +593,11 @@
cookie = tx->cookie;
if (desc->mark == DESC_COMPLETED && desc->chunks == 1) {
- BUG_ON(sh_chan->completed_cookie != desc->cookie - 1);
+ if (sh_chan->completed_cookie != desc->cookie - 1)
+ dev_dbg(sh_chan->dev,
+ "Completing cookie %d, expected %d\n",
+ desc->cookie,
+ sh_chan->completed_cookie + 1);
sh_chan->completed_cookie = desc->cookie;
}
@@ -492,7 +670,7 @@
return;
}
- /* Find the first un-transfer desciptor */
+ /* Find the first not transferred desciptor */
list_for_each_entry(sd, &sh_chan->ld_queue, node)
if (sd->mark == DESC_SUBMITTED) {
/* Get the ld start address from ld_queue */
@@ -559,7 +737,7 @@
/* IRQ Multi */
if (shdev->pdata.mode & SHDMA_MIX_IRQ) {
- int cnt = 0;
+ int __maybe_unused cnt = 0;
switch (irq) {
#if defined(DMTE6_IRQ) && defined(DMAE1_IRQ)
case DMTE6_IRQ:
@@ -596,11 +774,14 @@
struct sh_dmae_chan *sh_chan = (struct sh_dmae_chan *)data;
struct sh_desc *desc;
u32 sar_buf = sh_dmae_readl(sh_chan, SAR);
+ u32 dar_buf = sh_dmae_readl(sh_chan, DAR);
spin_lock(&sh_chan->desc_lock);
list_for_each_entry(desc, &sh_chan->ld_queue, node) {
- if ((desc->hw.sar + desc->hw.tcr) == sar_buf &&
- desc->mark == DESC_SUBMITTED) {
+ if (desc->mark == DESC_SUBMITTED &&
+ ((desc->direction == DMA_FROM_DEVICE &&
+ (desc->hw.dar + desc->hw.tcr) == dar_buf) ||
+ (desc->hw.sar + desc->hw.tcr) == sar_buf)) {
dev_dbg(sh_chan->dev, "done #%d@%p dst %u\n",
desc->async_tx.cookie, &desc->async_tx,
desc->hw.dar);
@@ -673,7 +854,7 @@
}
snprintf(new_sh_chan->dev_id, sizeof(new_sh_chan->dev_id),
- "sh-dmae%d", new_sh_chan->id);
+ "sh-dmae%d", new_sh_chan->id);
/* set up channel irq */
err = request_irq(irq, &sh_dmae_interrupt, irqflags,
@@ -684,11 +865,6 @@
goto err_no_irq;
}
- /* CHCR register control function */
- new_sh_chan->set_chcr = dmae_set_chcr;
- /* DMARS register control function */
- new_sh_chan->set_dmars = dmae_set_dmars;
-
shdev->chan[id] = new_sh_chan;
return 0;
@@ -759,12 +935,19 @@
INIT_LIST_HEAD(&shdev->common.channels);
dma_cap_set(DMA_MEMCPY, shdev->common.cap_mask);
+ dma_cap_set(DMA_SLAVE, shdev->common.cap_mask);
+
shdev->common.device_alloc_chan_resources
= sh_dmae_alloc_chan_resources;
shdev->common.device_free_chan_resources = sh_dmae_free_chan_resources;
shdev->common.device_prep_dma_memcpy = sh_dmae_prep_memcpy;
shdev->common.device_is_tx_complete = sh_dmae_is_complete;
shdev->common.device_issue_pending = sh_dmae_memcpy_issue_pending;
+
+ /* Compulsory for DMA_SLAVE fields */
+ shdev->common.device_prep_slave_sg = sh_dmae_prep_slave_sg;
+ shdev->common.device_terminate_all = sh_dmae_terminate_all;
+
shdev->common.dev = &pdev->dev;
/* Default transfer size of 32 bytes requires 32-byte alignment */
shdev->common.copy_align = 5;
diff --git a/drivers/dma/shdma.h b/drivers/dma/shdma.h
index 108f1cf..7e227f3 100644
--- a/drivers/dma/shdma.h
+++ b/drivers/dma/shdma.h
@@ -29,6 +29,7 @@
struct sh_dmae_regs hw;
struct list_head node;
struct dma_async_tx_descriptor async_tx;
+ enum dma_data_direction direction;
dma_cookie_t cookie;
int chunks;
int mark;
@@ -45,13 +46,9 @@
struct device *dev; /* Channel device */
struct tasklet_struct tasklet; /* Tasklet */
int descs_allocated; /* desc count */
+ int xmit_shift; /* log_2(bytes_per_xfer) */
int id; /* Raw id of this channel */
char dev_id[16]; /* unique name per DMAC of channel */
-
- /* Set chcr */
- int (*set_chcr)(struct sh_dmae_chan *sh_chan, u32 regs);
- /* Set DMA resource */
- int (*set_dmars)(struct sh_dmae_chan *sh_chan, u16 res);
};
struct sh_dmae_device {
diff --git a/drivers/firmware/iscsi_ibft.c b/drivers/firmware/iscsi_ibft.c
index 051d1eb..f82bcda 100644
--- a/drivers/firmware/iscsi_ibft.c
+++ b/drivers/firmware/iscsi_ibft.c
@@ -381,7 +381,7 @@
void *ibft_loc = entry->header;
char *str = buf;
char *mac;
- int val;
+ __be32 val;
if (!nic)
return 0;
@@ -397,10 +397,8 @@
str += sprintf_ipaddr(str, nic->ip_addr);
break;
case ibft_eth_subnet_mask:
- val = ~((1 << (32-nic->subnet_mask_prefix))-1);
- str += sprintf(str, NIPQUAD_FMT,
- (u8)(val >> 24), (u8)(val >> 16),
- (u8)(val >> 8), (u8)(val));
+ val = cpu_to_be32(~((1 << (32-nic->subnet_mask_prefix))-1));
+ str += sprintf(str, "%pI4", &val);
break;
case ibft_eth_origin:
str += sprintf(str, "%d\n", nic->origin);
diff --git a/drivers/gpu/drm/radeon/radeon_combios.c b/drivers/gpu/drm/radeon/radeon_combios.c
index e7b1944..22d4761 100644
--- a/drivers/gpu/drm/radeon/radeon_combios.c
+++ b/drivers/gpu/drm/radeon/radeon_combios.c
@@ -1279,47 +1279,47 @@
rdev->mode_info.connector_table = radeon_connector_table;
if (rdev->mode_info.connector_table == CT_NONE) {
#ifdef CONFIG_PPC_PMAC
- if (machine_is_compatible("PowerBook3,3")) {
+ if (of_machine_is_compatible("PowerBook3,3")) {
/* powerbook with VGA */
rdev->mode_info.connector_table = CT_POWERBOOK_VGA;
- } else if (machine_is_compatible("PowerBook3,4") ||
- machine_is_compatible("PowerBook3,5")) {
+ } else if (of_machine_is_compatible("PowerBook3,4") ||
+ of_machine_is_compatible("PowerBook3,5")) {
/* powerbook with internal tmds */
rdev->mode_info.connector_table = CT_POWERBOOK_INTERNAL;
- } else if (machine_is_compatible("PowerBook5,1") ||
- machine_is_compatible("PowerBook5,2") ||
- machine_is_compatible("PowerBook5,3") ||
- machine_is_compatible("PowerBook5,4") ||
- machine_is_compatible("PowerBook5,5")) {
+ } else if (of_machine_is_compatible("PowerBook5,1") ||
+ of_machine_is_compatible("PowerBook5,2") ||
+ of_machine_is_compatible("PowerBook5,3") ||
+ of_machine_is_compatible("PowerBook5,4") ||
+ of_machine_is_compatible("PowerBook5,5")) {
/* powerbook with external single link tmds (sil164) */
rdev->mode_info.connector_table = CT_POWERBOOK_EXTERNAL;
- } else if (machine_is_compatible("PowerBook5,6")) {
+ } else if (of_machine_is_compatible("PowerBook5,6")) {
/* powerbook with external dual or single link tmds */
rdev->mode_info.connector_table = CT_POWERBOOK_EXTERNAL;
- } else if (machine_is_compatible("PowerBook5,7") ||
- machine_is_compatible("PowerBook5,8") ||
- machine_is_compatible("PowerBook5,9")) {
+ } else if (of_machine_is_compatible("PowerBook5,7") ||
+ of_machine_is_compatible("PowerBook5,8") ||
+ of_machine_is_compatible("PowerBook5,9")) {
/* PowerBook6,2 ? */
/* powerbook with external dual link tmds (sil1178?) */
rdev->mode_info.connector_table = CT_POWERBOOK_EXTERNAL;
- } else if (machine_is_compatible("PowerBook4,1") ||
- machine_is_compatible("PowerBook4,2") ||
- machine_is_compatible("PowerBook4,3") ||
- machine_is_compatible("PowerBook6,3") ||
- machine_is_compatible("PowerBook6,5") ||
- machine_is_compatible("PowerBook6,7")) {
+ } else if (of_machine_is_compatible("PowerBook4,1") ||
+ of_machine_is_compatible("PowerBook4,2") ||
+ of_machine_is_compatible("PowerBook4,3") ||
+ of_machine_is_compatible("PowerBook6,3") ||
+ of_machine_is_compatible("PowerBook6,5") ||
+ of_machine_is_compatible("PowerBook6,7")) {
/* ibook */
rdev->mode_info.connector_table = CT_IBOOK;
- } else if (machine_is_compatible("PowerMac4,4")) {
+ } else if (of_machine_is_compatible("PowerMac4,4")) {
/* emac */
rdev->mode_info.connector_table = CT_EMAC;
- } else if (machine_is_compatible("PowerMac10,1")) {
+ } else if (of_machine_is_compatible("PowerMac10,1")) {
/* mini with internal tmds */
rdev->mode_info.connector_table = CT_MINI_INTERNAL;
- } else if (machine_is_compatible("PowerMac10,2")) {
+ } else if (of_machine_is_compatible("PowerMac10,2")) {
/* mini with external tmds */
rdev->mode_info.connector_table = CT_MINI_EXTERNAL;
- } else if (machine_is_compatible("PowerMac12,1")) {
+ } else if (of_machine_is_compatible("PowerMac12,1")) {
/* PowerMac8,1 ? */
/* imac g5 isight */
rdev->mode_info.connector_table = CT_IMAC_G5_ISIGHT;
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index 24d90ea..71d4c07 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -55,6 +55,12 @@
menu "Special HID drivers"
depends on HID
+config HID_3M_PCT
+ tristate "3M PCT"
+ depends on USB_HID
+ ---help---
+ Support for 3M PCT touch screens.
+
config HID_A4TECH
tristate "A4 tech" if EMBEDDED
depends on USB_HID
@@ -183,6 +189,23 @@
Say Y here if you want to enable force feedback support for Logitech
Rumblepad 2 devices.
+config LOGIG940_FF
+ bool "Logitech Flight System G940 force feedback support"
+ depends on HID_LOGITECH
+ select INPUT_FF_MEMLESS
+ help
+ Say Y here if you want to enable force feedback support for Logitech
+ Flight System G940 devices.
+
+config HID_MAGICMOUSE
+ tristate "Apple MagicMouse multi-touch support"
+ depends on BT_HIDP
+ ---help---
+ Support for the Apple Magic Mouse multi-touch.
+
+ Say Y here if you want support for the multi-touch features of the
+ Apple Wireless "Magic" Mouse.
+
config HID_MICROSOFT
tristate "Microsoft" if EMBEDDED
depends on USB_HID
@@ -190,6 +213,12 @@
---help---
Support for Microsoft devices that are not fully compliant with HID standard.
+config HID_MOSART
+ tristate "MosArt"
+ depends on USB_HID
+ ---help---
+ Support for MosArt dual-touch panels.
+
config HID_MONTEREY
tristate "Monterey" if EMBEDDED
depends on USB_HID
@@ -198,11 +227,17 @@
Support for Monterey Genius KB29E.
config HID_NTRIG
- tristate "NTrig" if EMBEDDED
+ tristate "NTrig"
+ depends on USB_HID
+ ---help---
+ Support for N-Trig touch screen.
+
+config HID_ORTEK
+ tristate "Ortek" if EMBEDDED
depends on USB_HID
default !EMBEDDED
---help---
- Support for N-Trig touch screen.
+ Support for Ortek WKB-2000 wireless keyboard + mouse trackpad.
config HID_PANTHERLORD
tristate "Pantherlord support" if EMBEDDED
@@ -227,6 +262,12 @@
---help---
Support for Petalynx Maxter remote control.
+config HID_QUANTA
+ tristate "Quanta Optical Touch"
+ depends on USB_HID
+ ---help---
+ Support for Quanta Optical Touch dual-touch panels.
+
config HID_SAMSUNG
tristate "Samsung" if EMBEDDED
depends on USB_HID
@@ -241,6 +282,12 @@
---help---
Support for Sony PS3 controller.
+config HID_STANTUM
+ tristate "Stantum"
+ depends on USB_HID
+ ---help---
+ Support for Stantum multitouch panel.
+
config HID_SUNPLUS
tristate "Sunplus" if EMBEDDED
depends on USB_HID
@@ -305,9 +352,8 @@
Rumble Force or Force Feedback Wheel.
config HID_WACOM
- tristate "Wacom Bluetooth devices support" if EMBEDDED
+ tristate "Wacom Bluetooth devices support"
depends on BT_HIDP
- default !EMBEDDED
---help---
Support for Wacom Graphire Bluetooth tablet.
diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile
index 0de2dff..0b2618f 100644
--- a/drivers/hid/Makefile
+++ b/drivers/hid/Makefile
@@ -18,7 +18,11 @@
ifdef CONFIG_LOGIRUMBLEPAD2_FF
hid-logitech-objs += hid-lg2ff.o
endif
+ifdef CONFIG_LOGIG940_FF
+ hid-logitech-objs += hid-lg3ff.o
+endif
+obj-$(CONFIG_HID_3M_PCT) += hid-3m-pct.o
obj-$(CONFIG_HID_A4TECH) += hid-a4tech.o
obj-$(CONFIG_HID_APPLE) += hid-apple.o
obj-$(CONFIG_HID_BELKIN) += hid-belkin.o
@@ -31,14 +35,19 @@
obj-$(CONFIG_HID_KENSINGTON) += hid-kensington.o
obj-$(CONFIG_HID_KYE) += hid-kye.o
obj-$(CONFIG_HID_LOGITECH) += hid-logitech.o
+obj-$(CONFIG_HID_MAGICMOUSE) += hid-magicmouse.o
obj-$(CONFIG_HID_MICROSOFT) += hid-microsoft.o
obj-$(CONFIG_HID_MONTEREY) += hid-monterey.o
+obj-$(CONFIG_HID_MOSART) += hid-mosart.o
obj-$(CONFIG_HID_NTRIG) += hid-ntrig.o
+obj-$(CONFIG_HID_ORTEK) += hid-ortek.o
+obj-$(CONFIG_HID_QUANTA) += hid-quanta.o
obj-$(CONFIG_HID_PANTHERLORD) += hid-pl.o
obj-$(CONFIG_HID_PETALYNX) += hid-petalynx.o
obj-$(CONFIG_HID_SAMSUNG) += hid-samsung.o
obj-$(CONFIG_HID_SMARTJOYPLUS) += hid-sjoy.o
obj-$(CONFIG_HID_SONY) += hid-sony.o
+obj-$(CONFIG_HID_STANTUM) += hid-stantum.o
obj-$(CONFIG_HID_SUNPLUS) += hid-sunplus.o
obj-$(CONFIG_HID_GREENASIA) += hid-gaff.o
obj-$(CONFIG_HID_THRUSTMASTER) += hid-tmff.o
diff --git a/drivers/hid/hid-3m-pct.c b/drivers/hid/hid-3m-pct.c
new file mode 100644
index 0000000..2370aef
--- /dev/null
+++ b/drivers/hid/hid-3m-pct.c
@@ -0,0 +1,290 @@
+/*
+ * HID driver for 3M PCT multitouch panels
+ *
+ * Copyright (c) 2009 Stephane Chatty <chatty@enac.fr>
+ *
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <linux/device.h>
+#include <linux/hid.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+
+MODULE_AUTHOR("Stephane Chatty <chatty@enac.fr>");
+MODULE_DESCRIPTION("3M PCT multitouch panels");
+MODULE_LICENSE("GPL");
+
+#include "hid-ids.h"
+
+struct mmm_finger {
+ __s32 x, y;
+ __u8 rank;
+ bool touch, valid;
+};
+
+struct mmm_data {
+ struct mmm_finger f[10];
+ __u8 curid, num;
+ bool touch, valid;
+};
+
+static int mmm_input_mapping(struct hid_device *hdev, struct hid_input *hi,
+ struct hid_field *field, struct hid_usage *usage,
+ unsigned long **bit, int *max)
+{
+ switch (usage->hid & HID_USAGE_PAGE) {
+
+ case HID_UP_BUTTON:
+ return -1;
+
+ case HID_UP_GENDESK:
+ switch (usage->hid) {
+ case HID_GD_X:
+ hid_map_usage(hi, usage, bit, max,
+ EV_ABS, ABS_MT_POSITION_X);
+ /* touchscreen emulation */
+ input_set_abs_params(hi->input, ABS_X,
+ field->logical_minimum,
+ field->logical_maximum, 0, 0);
+ return 1;
+ case HID_GD_Y:
+ hid_map_usage(hi, usage, bit, max,
+ EV_ABS, ABS_MT_POSITION_Y);
+ /* touchscreen emulation */
+ input_set_abs_params(hi->input, ABS_Y,
+ field->logical_minimum,
+ field->logical_maximum, 0, 0);
+ return 1;
+ }
+ return 0;
+
+ case HID_UP_DIGITIZER:
+ switch (usage->hid) {
+ /* we do not want to map these: no input-oriented meaning */
+ case 0x14:
+ case 0x23:
+ case HID_DG_INPUTMODE:
+ case HID_DG_DEVICEINDEX:
+ case HID_DG_CONTACTCOUNT:
+ case HID_DG_CONTACTMAX:
+ case HID_DG_INRANGE:
+ case HID_DG_CONFIDENCE:
+ return -1;
+ case HID_DG_TIPSWITCH:
+ /* touchscreen emulation */
+ hid_map_usage(hi, usage, bit, max, EV_KEY, BTN_TOUCH);
+ return 1;
+ case HID_DG_CONTACTID:
+ hid_map_usage(hi, usage, bit, max,
+ EV_ABS, ABS_MT_TRACKING_ID);
+ return 1;
+ }
+ /* let hid-input decide for the others */
+ return 0;
+
+ case 0xff000000:
+ /* we do not want to map these: no input-oriented meaning */
+ return -1;
+ }
+
+ return 0;
+}
+
+static int mmm_input_mapped(struct hid_device *hdev, struct hid_input *hi,
+ struct hid_field *field, struct hid_usage *usage,
+ unsigned long **bit, int *max)
+{
+ if (usage->type == EV_KEY || usage->type == EV_ABS)
+ clear_bit(usage->code, *bit);
+
+ return 0;
+}
+
+/*
+ * this function is called when a whole packet has been received and processed,
+ * so that it can decide what to send to the input layer.
+ */
+static void mmm_filter_event(struct mmm_data *md, struct input_dev *input)
+{
+ struct mmm_finger *oldest = 0;
+ bool pressed = false, released = false;
+ int i;
+
+ /*
+ * we need to iterate on all fingers to decide if we have a press
+ * or a release event in our touchscreen emulation.
+ */
+ for (i = 0; i < 10; ++i) {
+ struct mmm_finger *f = &md->f[i];
+ if (!f->valid) {
+ /* this finger is just placeholder data, ignore */
+ } else if (f->touch) {
+ /* this finger is on the screen */
+ input_event(input, EV_ABS, ABS_MT_TRACKING_ID, i);
+ input_event(input, EV_ABS, ABS_MT_POSITION_X, f->x);
+ input_event(input, EV_ABS, ABS_MT_POSITION_Y, f->y);
+ input_mt_sync(input);
+ /*
+ * touchscreen emulation: maintain the age rank
+ * of this finger, decide if we have a press
+ */
+ if (f->rank == 0) {
+ f->rank = ++(md->num);
+ if (f->rank == 1)
+ pressed = true;
+ }
+ if (f->rank == 1)
+ oldest = f;
+ } else {
+ /* this finger took off the screen */
+ /* touchscreen emulation: maintain age rank of others */
+ int j;
+
+ for (j = 0; j < 10; ++j) {
+ struct mmm_finger *g = &md->f[j];
+ if (g->rank > f->rank) {
+ g->rank--;
+ if (g->rank == 1)
+ oldest = g;
+ }
+ }
+ f->rank = 0;
+ --(md->num);
+ if (md->num == 0)
+ released = true;
+ }
+ f->valid = 0;
+ }
+
+ /* touchscreen emulation */
+ if (oldest) {
+ if (pressed)
+ input_event(input, EV_KEY, BTN_TOUCH, 1);
+ input_event(input, EV_ABS, ABS_X, oldest->x);
+ input_event(input, EV_ABS, ABS_Y, oldest->y);
+ } else if (released) {
+ input_event(input, EV_KEY, BTN_TOUCH, 0);
+ }
+}
+
+/*
+ * this function is called upon all reports
+ * so that we can accumulate contact point information,
+ * and call input_mt_sync after each point.
+ */
+static int mmm_event(struct hid_device *hid, struct hid_field *field,
+ struct hid_usage *usage, __s32 value)
+{
+ struct mmm_data *md = hid_get_drvdata(hid);
+ /*
+ * strangely, this function can be called before
+ * field->hidinput is initialized!
+ */
+ if (hid->claimed & HID_CLAIMED_INPUT) {
+ struct input_dev *input = field->hidinput->input;
+ switch (usage->hid) {
+ case HID_DG_TIPSWITCH:
+ md->touch = value;
+ break;
+ case HID_DG_CONFIDENCE:
+ md->valid = value;
+ break;
+ case HID_DG_CONTACTID:
+ if (md->valid) {
+ md->curid = value;
+ md->f[value].touch = md->touch;
+ md->f[value].valid = 1;
+ }
+ break;
+ case HID_GD_X:
+ if (md->valid)
+ md->f[md->curid].x = value;
+ break;
+ case HID_GD_Y:
+ if (md->valid)
+ md->f[md->curid].y = value;
+ break;
+ case HID_DG_CONTACTCOUNT:
+ mmm_filter_event(md, input);
+ break;
+ }
+ }
+
+ /* we have handled the hidinput part, now remains hiddev */
+ if (hid->claimed & HID_CLAIMED_HIDDEV && hid->hiddev_hid_event)
+ hid->hiddev_hid_event(hid, field, usage, value);
+
+ return 1;
+}
+
+static int mmm_probe(struct hid_device *hdev, const struct hid_device_id *id)
+{
+ int ret;
+ struct mmm_data *md;
+
+ md = kzalloc(sizeof(struct mmm_data), GFP_KERNEL);
+ if (!md) {
+ dev_err(&hdev->dev, "cannot allocate 3M data\n");
+ return -ENOMEM;
+ }
+ hid_set_drvdata(hdev, md);
+
+ ret = hid_parse(hdev);
+ if (!ret)
+ ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
+
+ if (ret)
+ kfree(md);
+ return ret;
+}
+
+static void mmm_remove(struct hid_device *hdev)
+{
+ hid_hw_stop(hdev);
+ kfree(hid_get_drvdata(hdev));
+ hid_set_drvdata(hdev, NULL);
+}
+
+static const struct hid_device_id mmm_devices[] = {
+ { HID_USB_DEVICE(USB_VENDOR_ID_3M, USB_DEVICE_ID_3M1968) },
+ { }
+};
+MODULE_DEVICE_TABLE(hid, mmm_devices);
+
+static const struct hid_usage_id mmm_grabbed_usages[] = {
+ { HID_ANY_ID, HID_ANY_ID, HID_ANY_ID },
+ { HID_ANY_ID - 1, HID_ANY_ID - 1, HID_ANY_ID - 1}
+};
+
+static struct hid_driver mmm_driver = {
+ .name = "3m-pct",
+ .id_table = mmm_devices,
+ .probe = mmm_probe,
+ .remove = mmm_remove,
+ .input_mapping = mmm_input_mapping,
+ .input_mapped = mmm_input_mapped,
+ .usage_table = mmm_grabbed_usages,
+ .event = mmm_event,
+};
+
+static int __init mmm_init(void)
+{
+ return hid_register_driver(&mmm_driver);
+}
+
+static void __exit mmm_exit(void)
+{
+ hid_unregister_driver(&mmm_driver);
+}
+
+module_init(mmm_init);
+module_exit(mmm_exit);
+MODULE_LICENSE("GPL");
+
diff --git a/drivers/hid/hid-apple.c b/drivers/hid/hid-apple.c
index 5b4d66d..78286b1 100644
--- a/drivers/hid/hid-apple.c
+++ b/drivers/hid/hid-apple.c
@@ -40,6 +40,11 @@
MODULE_PARM_DESC(fnmode, "Mode of fn key on Apple keyboards (0 = disabled, "
"[1] = fkeyslast, 2 = fkeysfirst)");
+static unsigned int iso_layout = 1;
+module_param(iso_layout, uint, 0644);
+MODULE_PARM_DESC(iso_layout, "Enable/Disable hardcoded ISO-layout of the keyboard. "
+ "(0 = disabled, [1] = enabled)");
+
struct apple_sc {
unsigned long quirks;
unsigned int fn_on;
@@ -199,11 +204,13 @@
}
}
- if (asc->quirks & APPLE_ISO_KEYBOARD) {
- trans = apple_find_translation(apple_iso_keyboard, usage->code);
- if (trans) {
- input_event(input, usage->type, trans->to, value);
- return 1;
+ if (iso_layout) {
+ if (asc->quirks & APPLE_ISO_KEYBOARD) {
+ trans = apple_find_translation(apple_iso_keyboard, usage->code);
+ if (trans) {
+ input_event(input, usage->type, trans->to, value);
+ return 1;
+ }
}
}
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index eabe5f8..368fbb0 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -4,7 +4,7 @@
* Copyright (c) 1999 Andreas Gal
* Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz>
* Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc
- * Copyright (c) 2006-2007 Jiri Kosina
+ * Copyright (c) 2006-2010 Jiri Kosina
*/
/*
@@ -51,7 +51,7 @@
* Register a new report for a device.
*/
-static struct hid_report *hid_register_report(struct hid_device *device, unsigned type, unsigned id)
+struct hid_report *hid_register_report(struct hid_device *device, unsigned type, unsigned id)
{
struct hid_report_enum *report_enum = device->report_enum + type;
struct hid_report *report;
@@ -75,6 +75,7 @@
return report;
}
+EXPORT_SYMBOL_GPL(hid_register_report);
/*
* Register a new field for this report.
@@ -387,7 +388,8 @@
__u32 data;
unsigned n;
- if (item->size == 0) {
+ /* Local delimiter could have value 0, which allows size to be 0 */
+ if (item->size == 0 && item->tag != HID_LOCAL_ITEM_TAG_DELIMITER) {
dbg_hid("item data expected for local item\n");
return -1;
}
@@ -1248,11 +1250,13 @@
/* a list of devices for which there is a specialized driver on HID bus */
static const struct hid_device_id hid_blacklist[] = {
+ { HID_USB_DEVICE(USB_VENDOR_ID_3M, USB_DEVICE_ID_3M1968) },
{ HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_WCP32PU) },
{ HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_X5_005D) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ATV_IRCONTROL) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_IRCONTROL4) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_MIGHTYMOUSE) },
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_MAGICMOUSE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_ANSI) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_ISO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER_ANSI) },
@@ -1324,6 +1328,7 @@
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_WINGMAN_F3D) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_WINGMAN_FFG ) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_FORCE3D_PRO) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_FLIGHT_SYSTEM_G940) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_MOMO_WHEEL) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_MOMO_WHEEL2) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_G25_WHEEL) },
@@ -1337,10 +1342,15 @@
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_WIRELESS_OPTICAL_DESKTOP_3_0) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MONTEREY, USB_DEVICE_ID_GENIUS_KB29E) },
{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_ORTEK, USB_DEVICE_ID_ORTEK_WKB2000) },
{ HID_USB_DEVICE(USB_VENDOR_ID_PETALYNX, USB_DEVICE_ID_PETALYNX_MAXTER_REMOTE) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_PIXART_IMAGING_INC_OPTICAL_TOUCH_SCREEN) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SAMSUNG, USB_DEVICE_ID_SAMSUNG_IR_REMOTE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER) },
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_VAIO_VGX_MOUSE) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_STANTUM, USB_DEVICE_ID_MTP) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SUNPLUS, USB_DEVICE_ID_SUNPLUS_WDESKTOP) },
{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb300) },
{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb304) },
@@ -1543,8 +1553,9 @@
{ HID_USB_DEVICE(USB_VENDOR_ID_AIPTEK, USB_DEVICE_ID_AIPTEK_24) },
{ HID_USB_DEVICE(USB_VENDOR_ID_AIRCABLE, USB_DEVICE_ID_AIRCABLE1) },
{ HID_USB_DEVICE(USB_VENDOR_ID_ALCOR, USB_DEVICE_ID_ALCOR_USBRS232) },
- { HID_USB_DEVICE(USB_VENDOR_ID_ASUS, USB_DEVICE_ID_ASUS_LCM)},
- { HID_USB_DEVICE(USB_VENDOR_ID_ASUS, USB_DEVICE_ID_ASUS_LCM2)},
+ { HID_USB_DEVICE(USB_VENDOR_ID_ASUS, USB_DEVICE_ID_ASUS_T91MT)},
+ { HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK, USB_DEVICE_ID_ASUSTEK_LCM)},
+ { HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK, USB_DEVICE_ID_ASUSTEK_LCM2)},
{ HID_USB_DEVICE(USB_VENDOR_ID_AVERMEDIA, USB_DEVICE_ID_AVER_FM_MR800) },
{ HID_USB_DEVICE(USB_VENDOR_ID_BERKSHIRE, USB_DEVICE_ID_BERKSHIRE_PCWD) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CIDC, 0x0103) },
@@ -1661,8 +1672,6 @@
{ HID_USB_DEVICE(USB_VENDOR_ID_PANJIT, 0x0004) },
{ HID_USB_DEVICE(USB_VENDOR_ID_PHILIPS, USB_DEVICE_ID_PHILIPS_IEEE802154_DONGLE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_POWERCOM, USB_DEVICE_ID_POWERCOM_UPS) },
- { HID_USB_DEVICE(USB_VENDOR_ID_TENX, USB_DEVICE_ID_TENX_IBUDDY1) },
- { HID_USB_DEVICE(USB_VENDOR_ID_TENX, USB_DEVICE_ID_TENX_IBUDDY2) },
{ HID_USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_LABPRO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_GOTEMP) },
{ HID_USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_SKIP) },
diff --git a/drivers/hid/hid-debug.c b/drivers/hid/hid-debug.c
index 6abd036..cd4ece6 100644
--- a/drivers/hid/hid-debug.c
+++ b/drivers/hid/hid-debug.c
@@ -864,13 +864,13 @@
[EV_SND] = sounds, [EV_REP] = repeats,
};
-void hid_resolv_event(__u8 type, __u16 code, struct seq_file *f) {
-
+static void hid_resolv_event(__u8 type, __u16 code, struct seq_file *f)
+{
seq_printf(f, "%s.%s", events[type] ? events[type] : "?",
names[type] ? (names[type][code] ? names[type][code] : "?") : "?");
}
-void hid_dump_input_mapping(struct hid_device *hid, struct seq_file *f)
+static void hid_dump_input_mapping(struct hid_device *hid, struct seq_file *f)
{
int i, j, k;
struct hid_report *report;
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 010368e..72c05f9 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -18,6 +18,9 @@
#ifndef HID_IDS_H_FILE
#define HID_IDS_H_FILE
+#define USB_VENDOR_ID_3M 0x0596
+#define USB_DEVICE_ID_3M1968 0x0500
+
#define USB_VENDOR_ID_A4TECH 0x09da
#define USB_DEVICE_ID_A4TECH_WCP32PU 0x0006
#define USB_DEVICE_ID_A4TECH_X5_005D 0x000a
@@ -56,6 +59,7 @@
#define USB_VENDOR_ID_APPLE 0x05ac
#define USB_DEVICE_ID_APPLE_MIGHTYMOUSE 0x0304
+#define USB_DEVICE_ID_APPLE_MAGICMOUSE 0x030d
#define USB_DEVICE_ID_APPLE_FOUNTAIN_ANSI 0x020e
#define USB_DEVICE_ID_APPLE_FOUNTAIN_ISO 0x020f
#define USB_DEVICE_ID_APPLE_GEYSER_ANSI 0x0214
@@ -96,9 +100,12 @@
#define USB_DEVICE_ID_APPLE_ATV_IRCONTROL 0x8241
#define USB_DEVICE_ID_APPLE_IRCONTROL4 0x8242
-#define USB_VENDOR_ID_ASUS 0x0b05
-#define USB_DEVICE_ID_ASUS_LCM 0x1726
-#define USB_DEVICE_ID_ASUS_LCM2 0x175b
+#define USB_VENDOR_ID_ASUS 0x0486
+#define USB_DEVICE_ID_ASUS_T91MT 0x0185
+
+#define USB_VENDOR_ID_ASUSTEK 0x0b05
+#define USB_DEVICE_ID_ASUSTEK_LCM 0x1726
+#define USB_DEVICE_ID_ASUSTEK_LCM2 0x175b
#define USB_VENDOR_ID_ATEN 0x0557
#define USB_DEVICE_ID_ATEN_UC100KM 0x2004
@@ -169,6 +176,9 @@
#define USB_VENDOR_ID_ESSENTIAL_REALITY 0x0d7f
#define USB_DEVICE_ID_ESSENTIAL_REALITY_P5 0x0100
+#define USB_VENDOR_ID_ETURBOTOUCH 0x22b9
+#define USB_DEVICE_ID_ETURBOTOUCH 0x0006
+
#define USB_VENDOR_ID_ETT 0x0664
#define USB_DEVICE_ID_TC5UH 0x0309
@@ -303,6 +313,7 @@
#define USB_DEVICE_ID_LOGITECH_RUMBLEPAD2_2 0xc219
#define USB_DEVICE_ID_LOGITECH_WINGMAN_F3D 0xc283
#define USB_DEVICE_ID_LOGITECH_FORCE3D_PRO 0xc286
+#define USB_DEVICE_ID_LOGITECH_FLIGHT_SYSTEM_G940 0xc287
#define USB_DEVICE_ID_LOGITECH_WHEEL 0xc294
#define USB_DEVICE_ID_LOGITECH_WINGMAN_FFG 0xc293
#define USB_DEVICE_ID_LOGITECH_MOMO_WHEEL 0xc295
@@ -365,6 +376,9 @@
#define USB_VENDOR_ID_ONTRAK 0x0a07
#define USB_DEVICE_ID_ONTRAK_ADU100 0x0064
+#define USB_VENDOR_ID_ORTEK 0x05a4
+#define USB_DEVICE_ID_ORTEK_WKB2000 0x2000
+
#define USB_VENDOR_ID_PANJIT 0x134c
#define USB_VENDOR_ID_PANTHERLORD 0x0810
@@ -382,9 +396,16 @@
#define USB_VENDOR_ID_POWERCOM 0x0d9f
#define USB_DEVICE_ID_POWERCOM_UPS 0x0002
+#define USB_VENDOR_ID_PRODIGE 0x05af
+#define USB_DEVICE_ID_PRODIGE_CORDLESS 0x3062
+
#define USB_VENDOR_ID_SAITEK 0x06a3
#define USB_DEVICE_ID_SAITEK_RUMBLEPAD 0xff17
+#define USB_VENDOR_ID_QUANTA 0x0408
+#define USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH 0x3000
+#define USB_DEVICE_ID_PIXART_IMAGING_INC_OPTICAL_TOUCH_SCREEN 0x3001
+
#define USB_VENDOR_ID_SAMSUNG 0x0419
#define USB_DEVICE_ID_SAMSUNG_IR_REMOTE 0x0001
@@ -396,18 +417,20 @@
#define USB_DEVICE_ID_SOUNDGRAPH_IMON_FIRST 0x0034
#define USB_DEVICE_ID_SOUNDGRAPH_IMON_LAST 0x0046
+#define USB_VENDOR_ID_STANTUM 0x1f87
+#define USB_DEVICE_ID_MTP 0x0002
+
#define USB_VENDOR_ID_SUN 0x0430
#define USB_DEVICE_ID_RARITAN_KVM_DONGLE 0xcdab
#define USB_VENDOR_ID_SUNPLUS 0x04fc
#define USB_DEVICE_ID_SUNPLUS_WDESKTOP 0x05d8
-#define USB_VENDOR_ID_TENX 0x1130
-#define USB_DEVICE_ID_TENX_IBUDDY1 0x0001
-#define USB_DEVICE_ID_TENX_IBUDDY2 0x0002
-
#define USB_VENDOR_ID_THRUSTMASTER 0x044f
+#define USB_VENDOR_ID_TOUCHPACK 0x1bfd
+#define USB_DEVICE_ID_TOUCHPACK_RTS 0x1688
+
#define USB_VENDOR_ID_TOPMAX 0x0663
#define USB_DEVICE_ID_TOPMAX_COBRAPAD 0x0103
diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c
index 5862b0f..79d9edd 100644
--- a/drivers/hid/hid-input.c
+++ b/drivers/hid/hid-input.c
@@ -1,6 +1,6 @@
/*
* Copyright (c) 2000-2001 Vojtech Pavlik
- * Copyright (c) 2006-2007 Jiri Kosina
+ * Copyright (c) 2006-2010 Jiri Kosina
*
* HID to Linux Input mapping
*/
@@ -193,12 +193,17 @@
break;
case HID_UP_BUTTON:
- code = ((usage->hid - 1) & 0xf);
+ code = ((usage->hid - 1) & HID_USAGE);
switch (field->application) {
case HID_GD_MOUSE:
case HID_GD_POINTER: code += 0x110; break;
- case HID_GD_JOYSTICK: code += 0x120; break;
+ case HID_GD_JOYSTICK:
+ if (code <= 0xf)
+ code += BTN_JOYSTICK;
+ else
+ code += BTN_TRIGGER_HAPPY;
+ break;
case HID_GD_GAMEPAD: code += 0x130; break;
default:
switch (field->physical) {
@@ -400,6 +405,7 @@
case 0x192: map_key_clear(KEY_CALC); break;
case 0x194: map_key_clear(KEY_FILE); break;
case 0x196: map_key_clear(KEY_WWW); break;
+ case 0x199: map_key_clear(KEY_CHAT); break;
case 0x19c: map_key_clear(KEY_LOGOFF); break;
case 0x19e: map_key_clear(KEY_COFFEE); break;
case 0x1a6: map_key_clear(KEY_HELP); break;
diff --git a/drivers/hid/hid-lg.c b/drivers/hid/hid-lg.c
index 9fcd3d0..3677c90 100644
--- a/drivers/hid/hid-lg.c
+++ b/drivers/hid/hid-lg.c
@@ -34,6 +34,7 @@
#define LG_FF 0x200
#define LG_FF2 0x400
#define LG_RDESC_REL_ABS 0x800
+#define LG_FF3 0x1000
/*
* Certain Logitech keyboards send in report #3 keys which are far
@@ -266,7 +267,7 @@
goto err_free;
}
- if (quirks & (LG_FF | LG_FF2))
+ if (quirks & (LG_FF | LG_FF2 | LG_FF3))
connect_mask &= ~HID_CONNECT_FF;
ret = hid_hw_start(hdev, connect_mask);
@@ -279,6 +280,8 @@
lgff_init(hdev);
if (quirks & LG_FF2)
lg2ff_init(hdev);
+ if (quirks & LG_FF3)
+ lg3ff_init(hdev);
return 0;
err_free:
@@ -331,6 +334,8 @@
.driver_data = LG_FF },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_RUMBLEPAD2),
.driver_data = LG_FF2 },
+ { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_FLIGHT_SYSTEM_G940),
+ .driver_data = LG_FF3 },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_SPACENAVIGATOR),
.driver_data = LG_RDESC_REL_ABS },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_SPACETRAVELLER),
diff --git a/drivers/hid/hid-lg.h b/drivers/hid/hid-lg.h
index bf31592..ce2ac86 100644
--- a/drivers/hid/hid-lg.h
+++ b/drivers/hid/hid-lg.h
@@ -13,4 +13,10 @@
static inline int lg2ff_init(struct hid_device *hdev) { return -1; }
#endif
+#ifdef CONFIG_LOGIG940_FF
+int lg3ff_init(struct hid_device *hdev);
+#else
+static inline int lg3ff_init(struct hid_device *hdev) { return -1; }
+#endif
+
#endif
diff --git a/drivers/hid/hid-lg3ff.c b/drivers/hid/hid-lg3ff.c
new file mode 100644
index 0000000..4002832
--- /dev/null
+++ b/drivers/hid/hid-lg3ff.c
@@ -0,0 +1,176 @@
+/*
+ * Force feedback support for Logitech Flight System G940
+ *
+ * Copyright (c) 2009 Gary Stein <LordCnidarian@gmail.com>
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+
+#include <linux/input.h>
+#include <linux/usb.h>
+#include <linux/hid.h>
+
+#include "usbhid/usbhid.h"
+#include "hid-lg.h"
+
+/*
+ * G940 Theory of Operation (from experimentation)
+ *
+ * There are 63 fields (only 3 of them currently used)
+ * 0 - seems to be command field
+ * 1 - 30 deal with the x axis
+ * 31 -60 deal with the y axis
+ *
+ * Field 1 is x axis constant force
+ * Field 31 is y axis constant force
+ *
+ * other interesting fields 1,2,3,4 on x axis
+ * (same for 31,32,33,34 on y axis)
+ *
+ * 0 0 127 127 makes the joystick autocenter hard
+ *
+ * 127 0 127 127 makes the joystick loose on the right,
+ * but stops all movemnt left
+ *
+ * -127 0 -127 -127 makes the joystick loose on the left,
+ * but stops all movement right
+ *
+ * 0 0 -127 -127 makes the joystick rattle very hard
+ *
+ * I'm sure these are effects that I don't know enough about them
+ */
+
+struct lg3ff_device {
+ struct hid_report *report;
+};
+
+static int hid_lg3ff_play(struct input_dev *dev, void *data,
+ struct ff_effect *effect)
+{
+ struct hid_device *hid = input_get_drvdata(dev);
+ struct list_head *report_list = &hid->report_enum[HID_OUTPUT_REPORT].report_list;
+ struct hid_report *report = list_entry(report_list->next, struct hid_report, list);
+ int x, y;
+
+/*
+ * Maxusage should always be 63 (maximum fields)
+ * likely a better way to ensure this data is clean
+ */
+ memset(report->field[0]->value, 0, sizeof(__s32)*report->field[0]->maxusage);
+
+ switch (effect->type) {
+ case FF_CONSTANT:
+/*
+ * Already clamped in ff_memless
+ * 0 is center (different then other logitech)
+ */
+ x = effect->u.ramp.start_level;
+ y = effect->u.ramp.end_level;
+
+ /* send command byte */
+ report->field[0]->value[0] = 0x51;
+
+/*
+ * Sign backwards from other Force3d pro
+ * which get recast here in two's complement 8 bits
+ */
+ report->field[0]->value[1] = (unsigned char)(-x);
+ report->field[0]->value[31] = (unsigned char)(-y);
+
+ usbhid_submit_report(hid, report, USB_DIR_OUT);
+ break;
+ }
+ return 0;
+}
+static void hid_lg3ff_set_autocenter(struct input_dev *dev, u16 magnitude)
+{
+ struct hid_device *hid = input_get_drvdata(dev);
+ struct list_head *report_list = &hid->report_enum[HID_OUTPUT_REPORT].report_list;
+ struct hid_report *report = list_entry(report_list->next, struct hid_report, list);
+
+/*
+ * Auto Centering probed from device
+ * NOTE: deadman's switch on G940 must be covered
+ * for effects to work
+ */
+ report->field[0]->value[0] = 0x51;
+ report->field[0]->value[1] = 0x00;
+ report->field[0]->value[2] = 0x00;
+ report->field[0]->value[3] = 0x7F;
+ report->field[0]->value[4] = 0x7F;
+ report->field[0]->value[31] = 0x00;
+ report->field[0]->value[32] = 0x00;
+ report->field[0]->value[33] = 0x7F;
+ report->field[0]->value[34] = 0x7F;
+
+ usbhid_submit_report(hid, report, USB_DIR_OUT);
+}
+
+
+static const signed short ff3_joystick_ac[] = {
+ FF_CONSTANT,
+ FF_AUTOCENTER,
+ -1
+};
+
+int lg3ff_init(struct hid_device *hid)
+{
+ struct hid_input *hidinput = list_entry(hid->inputs.next, struct hid_input, list);
+ struct list_head *report_list = &hid->report_enum[HID_OUTPUT_REPORT].report_list;
+ struct input_dev *dev = hidinput->input;
+ struct hid_report *report;
+ struct hid_field *field;
+ const signed short *ff_bits = ff3_joystick_ac;
+ int error;
+ int i;
+
+ /* Find the report to use */
+ if (list_empty(report_list)) {
+ err_hid("No output report found");
+ return -1;
+ }
+
+ /* Check that the report looks ok */
+ report = list_entry(report_list->next, struct hid_report, list);
+ if (!report) {
+ err_hid("NULL output report");
+ return -1;
+ }
+
+ field = report->field[0];
+ if (!field) {
+ err_hid("NULL field");
+ return -1;
+ }
+
+ /* Assume single fixed device G940 */
+ for (i = 0; ff_bits[i] >= 0; i++)
+ set_bit(ff_bits[i], dev->ffbit);
+
+ error = input_ff_create_memless(dev, NULL, hid_lg3ff_play);
+ if (error)
+ return error;
+
+ if (test_bit(FF_AUTOCENTER, dev->ffbit))
+ dev->ff->set_autocenter = hid_lg3ff_set_autocenter;
+
+ dev_info(&hid->dev, "Force feedback for Logitech Flight System G940 by "
+ "Gary Stein <LordCnidarian@gmail.com>\n");
+ return 0;
+}
+
diff --git a/drivers/hid/hid-lgff.c b/drivers/hid/hid-lgff.c
index 987abeb..61142b7 100644
--- a/drivers/hid/hid-lgff.c
+++ b/drivers/hid/hid-lgff.c
@@ -67,6 +67,7 @@
{ 0x046d, 0xc219, ff_rumble },
{ 0x046d, 0xc283, ff_joystick },
{ 0x046d, 0xc286, ff_joystick_ac },
+ { 0x046d, 0xc287, ff_joystick_ac },
{ 0x046d, 0xc293, ff_joystick },
{ 0x046d, 0xc294, ff_wheel },
{ 0x046d, 0xc295, ff_joystick },
diff --git a/drivers/hid/hid-magicmouse.c b/drivers/hid/hid-magicmouse.c
new file mode 100644
index 0000000..4a3a94f
--- /dev/null
+++ b/drivers/hid/hid-magicmouse.c
@@ -0,0 +1,449 @@
+/*
+ * Apple "Magic" Wireless Mouse driver
+ *
+ * Copyright (c) 2010 Michael Poole <mdpoole@troilus.org>
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <linux/device.h>
+#include <linux/hid.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+
+#include "hid-ids.h"
+
+static bool emulate_3button = true;
+module_param(emulate_3button, bool, 0644);
+MODULE_PARM_DESC(emulate_3button, "Emulate a middle button");
+
+static int middle_button_start = -350;
+static int middle_button_stop = +350;
+
+static bool emulate_scroll_wheel = true;
+module_param(emulate_scroll_wheel, bool, 0644);
+MODULE_PARM_DESC(emulate_scroll_wheel, "Emulate a scroll wheel");
+
+static bool report_touches = true;
+module_param(report_touches, bool, 0644);
+MODULE_PARM_DESC(report_touches, "Emit touch records (otherwise, only use them for emulation)");
+
+static bool report_undeciphered;
+module_param(report_undeciphered, bool, 0644);
+MODULE_PARM_DESC(report_undeciphered, "Report undeciphered multi-touch state field using a MSC_RAW event");
+
+#define TOUCH_REPORT_ID 0x29
+/* These definitions are not precise, but they're close enough. (Bits
+ * 0x03 seem to indicate the aspect ratio of the touch, bits 0x70 seem
+ * to be some kind of bit mask -- 0x20 may be a near-field reading,
+ * and 0x40 is actual contact, and 0x10 may be a start/stop or change
+ * indication.)
+ */
+#define TOUCH_STATE_MASK 0xf0
+#define TOUCH_STATE_NONE 0x00
+#define TOUCH_STATE_START 0x30
+#define TOUCH_STATE_DRAG 0x40
+
+/**
+ * struct magicmouse_sc - Tracks Magic Mouse-specific data.
+ * @input: Input device through which we report events.
+ * @quirks: Currently unused.
+ * @last_timestamp: Timestamp from most recent (18-bit) touch report
+ * (units of milliseconds over short windows, but seems to
+ * increase faster when there are no touches).
+ * @delta_time: 18-bit difference between the two most recent touch
+ * reports from the mouse.
+ * @ntouches: Number of touches in most recent touch report.
+ * @scroll_accel: Number of consecutive scroll motions.
+ * @scroll_jiffies: Time of last scroll motion.
+ * @touches: Most recent data for a touch, indexed by tracking ID.
+ * @tracking_ids: Mapping of current touch input data to @touches.
+ */
+struct magicmouse_sc {
+ struct input_dev *input;
+ unsigned long quirks;
+
+ int last_timestamp;
+ int delta_time;
+ int ntouches;
+ int scroll_accel;
+ unsigned long scroll_jiffies;
+
+ struct {
+ short x;
+ short y;
+ short scroll_y;
+ u8 size;
+ } touches[16];
+ int tracking_ids[16];
+};
+
+static int magicmouse_firm_touch(struct magicmouse_sc *msc)
+{
+ int touch = -1;
+ int ii;
+
+ /* If there is only one "firm" touch, set touch to its
+ * tracking ID.
+ */
+ for (ii = 0; ii < msc->ntouches; ii++) {
+ int idx = msc->tracking_ids[ii];
+ if (msc->touches[idx].size < 8) {
+ /* Ignore this touch. */
+ } else if (touch >= 0) {
+ touch = -1;
+ break;
+ } else {
+ touch = idx;
+ }
+ }
+
+ return touch;
+}
+
+static void magicmouse_emit_buttons(struct magicmouse_sc *msc, int state)
+{
+ int last_state = test_bit(BTN_LEFT, msc->input->key) << 0 |
+ test_bit(BTN_RIGHT, msc->input->key) << 1 |
+ test_bit(BTN_MIDDLE, msc->input->key) << 2;
+
+ if (emulate_3button) {
+ int id;
+
+ /* If some button was pressed before, keep it held
+ * down. Otherwise, if there's exactly one firm
+ * touch, use that to override the mouse's guess.
+ */
+ if (state == 0) {
+ /* The button was released. */
+ } else if (last_state != 0) {
+ state = last_state;
+ } else if ((id = magicmouse_firm_touch(msc)) >= 0) {
+ int x = msc->touches[id].x;
+ if (x < middle_button_start)
+ state = 1;
+ else if (x > middle_button_stop)
+ state = 2;
+ else
+ state = 4;
+ } /* else: we keep the mouse's guess */
+
+ input_report_key(msc->input, BTN_MIDDLE, state & 4);
+ }
+
+ input_report_key(msc->input, BTN_LEFT, state & 1);
+ input_report_key(msc->input, BTN_RIGHT, state & 2);
+
+ if (state != last_state)
+ msc->scroll_accel = 0;
+}
+
+static void magicmouse_emit_touch(struct magicmouse_sc *msc, int raw_id, u8 *tdata)
+{
+ struct input_dev *input = msc->input;
+ __s32 x_y = tdata[0] << 8 | tdata[1] << 16 | tdata[2] << 24;
+ int misc = tdata[5] | tdata[6] << 8;
+ int id = (misc >> 6) & 15;
+ int x = x_y << 12 >> 20;
+ int y = -(x_y >> 20);
+
+ /* Store tracking ID and other fields. */
+ msc->tracking_ids[raw_id] = id;
+ msc->touches[id].x = x;
+ msc->touches[id].y = y;
+ msc->touches[id].size = misc & 63;
+
+ /* If requested, emulate a scroll wheel by detecting small
+ * vertical touch motions along the middle of the mouse.
+ */
+ if (emulate_scroll_wheel &&
+ middle_button_start < x && x < middle_button_stop) {
+ static const int accel_profile[] = {
+ 256, 228, 192, 160, 128, 96, 64, 32,
+ };
+ unsigned long now = jiffies;
+ int step = msc->touches[id].scroll_y - y;
+
+ /* Reset acceleration after half a second. */
+ if (time_after(now, msc->scroll_jiffies + HZ / 2))
+ msc->scroll_accel = 0;
+
+ /* Calculate and apply the scroll motion. */
+ switch (tdata[7] & TOUCH_STATE_MASK) {
+ case TOUCH_STATE_START:
+ msc->touches[id].scroll_y = y;
+ msc->scroll_accel = min_t(int, msc->scroll_accel + 1,
+ ARRAY_SIZE(accel_profile) - 1);
+ break;
+ case TOUCH_STATE_DRAG:
+ step = step / accel_profile[msc->scroll_accel];
+ if (step != 0) {
+ msc->touches[id].scroll_y = y;
+ msc->scroll_jiffies = now;
+ input_report_rel(input, REL_WHEEL, step);
+ }
+ break;
+ }
+ }
+
+ /* Generate the input events for this touch. */
+ if (report_touches) {
+ int orientation = (misc >> 10) - 32;
+
+ input_report_abs(input, ABS_MT_TRACKING_ID, id);
+ input_report_abs(input, ABS_MT_TOUCH_MAJOR, tdata[3]);
+ input_report_abs(input, ABS_MT_TOUCH_MINOR, tdata[4]);
+ input_report_abs(input, ABS_MT_ORIENTATION, orientation);
+ input_report_abs(input, ABS_MT_POSITION_X, x);
+ input_report_abs(input, ABS_MT_POSITION_Y, y);
+
+ if (report_undeciphered)
+ input_event(input, EV_MSC, MSC_RAW, tdata[7]);
+
+ input_mt_sync(input);
+ }
+}
+
+static int magicmouse_raw_event(struct hid_device *hdev,
+ struct hid_report *report, u8 *data, int size)
+{
+ struct magicmouse_sc *msc = hid_get_drvdata(hdev);
+ struct input_dev *input = msc->input;
+ int x, y, ts, ii, clicks;
+
+ switch (data[0]) {
+ case 0x10:
+ if (size != 6)
+ return 0;
+ x = (__s16)(data[2] | data[3] << 8);
+ y = (__s16)(data[4] | data[5] << 8);
+ clicks = data[1];
+ break;
+ case TOUCH_REPORT_ID:
+ /* Expect six bytes of prefix, and N*8 bytes of touch data. */
+ if (size < 6 || ((size - 6) % 8) != 0)
+ return 0;
+ ts = data[3] >> 6 | data[4] << 2 | data[5] << 10;
+ msc->delta_time = (ts - msc->last_timestamp) & 0x3ffff;
+ msc->last_timestamp = ts;
+ msc->ntouches = (size - 6) / 8;
+ for (ii = 0; ii < msc->ntouches; ii++)
+ magicmouse_emit_touch(msc, ii, data + ii * 8 + 6);
+ /* When emulating three-button mode, it is important
+ * to have the current touch information before
+ * generating a click event.
+ */
+ x = (signed char)data[1];
+ y = (signed char)data[2];
+ clicks = data[3];
+ break;
+ case 0x20: /* Theoretically battery status (0-100), but I have
+ * never seen it -- maybe it is only upon request.
+ */
+ case 0x60: /* Unknown, maybe laser on/off. */
+ case 0x61: /* Laser reflection status change.
+ * data[1]: 0 = spotted, 1 = lost
+ */
+ default:
+ return 0;
+ }
+
+ magicmouse_emit_buttons(msc, clicks & 3);
+ input_report_rel(input, REL_X, x);
+ input_report_rel(input, REL_Y, y);
+ input_sync(input);
+ return 1;
+}
+
+static int magicmouse_input_open(struct input_dev *dev)
+{
+ struct hid_device *hid = input_get_drvdata(dev);
+
+ return hid->ll_driver->open(hid);
+}
+
+static void magicmouse_input_close(struct input_dev *dev)
+{
+ struct hid_device *hid = input_get_drvdata(dev);
+
+ hid->ll_driver->close(hid);
+}
+
+static void magicmouse_setup_input(struct input_dev *input, struct hid_device *hdev)
+{
+ input_set_drvdata(input, hdev);
+ input->event = hdev->ll_driver->hidinput_input_event;
+ input->open = magicmouse_input_open;
+ input->close = magicmouse_input_close;
+
+ input->name = hdev->name;
+ input->phys = hdev->phys;
+ input->uniq = hdev->uniq;
+ input->id.bustype = hdev->bus;
+ input->id.vendor = hdev->vendor;
+ input->id.product = hdev->product;
+ input->id.version = hdev->version;
+ input->dev.parent = hdev->dev.parent;
+
+ __set_bit(EV_KEY, input->evbit);
+ __set_bit(BTN_LEFT, input->keybit);
+ __set_bit(BTN_RIGHT, input->keybit);
+ if (emulate_3button)
+ __set_bit(BTN_MIDDLE, input->keybit);
+ __set_bit(BTN_TOOL_FINGER, input->keybit);
+
+ __set_bit(EV_REL, input->evbit);
+ __set_bit(REL_X, input->relbit);
+ __set_bit(REL_Y, input->relbit);
+ if (emulate_scroll_wheel)
+ __set_bit(REL_WHEEL, input->relbit);
+
+ if (report_touches) {
+ __set_bit(EV_ABS, input->evbit);
+
+ input_set_abs_params(input, ABS_MT_TRACKING_ID, 0, 15, 0, 0);
+ input_set_abs_params(input, ABS_MT_TOUCH_MAJOR, 0, 255, 4, 0);
+ input_set_abs_params(input, ABS_MT_TOUCH_MINOR, 0, 255, 4, 0);
+ input_set_abs_params(input, ABS_MT_ORIENTATION, -32, 31, 1, 0);
+ input_set_abs_params(input, ABS_MT_POSITION_X, -1100, 1358,
+ 4, 0);
+ /* Note: Touch Y position from the device is inverted relative
+ * to how pointer motion is reported (and relative to how USB
+ * HID recommends the coordinates work). This driver keeps
+ * the origin at the same position, and just uses the additive
+ * inverse of the reported Y.
+ */
+ input_set_abs_params(input, ABS_MT_POSITION_Y, -1589, 2047,
+ 4, 0);
+ }
+
+ if (report_undeciphered) {
+ __set_bit(EV_MSC, input->evbit);
+ __set_bit(MSC_RAW, input->mscbit);
+ }
+}
+
+static int magicmouse_probe(struct hid_device *hdev,
+ const struct hid_device_id *id)
+{
+ __u8 feature_1[] = { 0xd7, 0x01 };
+ __u8 feature_2[] = { 0xf8, 0x01, 0x32 };
+ struct input_dev *input;
+ struct magicmouse_sc *msc;
+ struct hid_report *report;
+ int ret;
+
+ msc = kzalloc(sizeof(*msc), GFP_KERNEL);
+ if (msc == NULL) {
+ dev_err(&hdev->dev, "can't alloc magicmouse descriptor\n");
+ return -ENOMEM;
+ }
+
+ msc->quirks = id->driver_data;
+ hid_set_drvdata(hdev, msc);
+
+ ret = hid_parse(hdev);
+ if (ret) {
+ dev_err(&hdev->dev, "magicmouse hid parse failed\n");
+ goto err_free;
+ }
+
+ ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
+ if (ret) {
+ dev_err(&hdev->dev, "magicmouse hw start failed\n");
+ goto err_free;
+ }
+
+ report = hid_register_report(hdev, HID_INPUT_REPORT, TOUCH_REPORT_ID);
+ if (!report) {
+ dev_err(&hdev->dev, "unable to register touch report\n");
+ ret = -ENOMEM;
+ goto err_stop_hw;
+ }
+ report->size = 6;
+
+ ret = hdev->hid_output_raw_report(hdev, feature_1, sizeof(feature_1),
+ HID_FEATURE_REPORT);
+ if (ret != sizeof(feature_1)) {
+ dev_err(&hdev->dev, "unable to request touch data (1:%d)\n",
+ ret);
+ goto err_stop_hw;
+ }
+ ret = hdev->hid_output_raw_report(hdev, feature_2,
+ sizeof(feature_2), HID_FEATURE_REPORT);
+ if (ret != sizeof(feature_2)) {
+ dev_err(&hdev->dev, "unable to request touch data (2:%d)\n",
+ ret);
+ goto err_stop_hw;
+ }
+
+ input = input_allocate_device();
+ if (!input) {
+ dev_err(&hdev->dev, "can't alloc input device\n");
+ ret = -ENOMEM;
+ goto err_stop_hw;
+ }
+ magicmouse_setup_input(input, hdev);
+
+ ret = input_register_device(input);
+ if (ret) {
+ dev_err(&hdev->dev, "input device registration failed\n");
+ goto err_input;
+ }
+ msc->input = input;
+
+ return 0;
+err_input:
+ input_free_device(input);
+err_stop_hw:
+ hid_hw_stop(hdev);
+err_free:
+ kfree(msc);
+ return ret;
+}
+
+static void magicmouse_remove(struct hid_device *hdev)
+{
+ hid_hw_stop(hdev);
+ kfree(hid_get_drvdata(hdev));
+}
+
+static const struct hid_device_id magic_mice[] = {
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_MAGICMOUSE),
+ .driver_data = 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(hid, magic_mice);
+
+static struct hid_driver magicmouse_driver = {
+ .name = "magicmouse",
+ .id_table = magic_mice,
+ .probe = magicmouse_probe,
+ .remove = magicmouse_remove,
+ .raw_event = magicmouse_raw_event,
+};
+
+static int __init magicmouse_init(void)
+{
+ int ret;
+
+ ret = hid_register_driver(&magicmouse_driver);
+ if (ret)
+ printk(KERN_ERR "can't register magicmouse driver\n");
+
+ return ret;
+}
+
+static void __exit magicmouse_exit(void)
+{
+ hid_unregister_driver(&magicmouse_driver);
+}
+
+module_init(magicmouse_init);
+module_exit(magicmouse_exit);
+MODULE_LICENSE("GPL");
diff --git a/drivers/hid/hid-mosart.c b/drivers/hid/hid-mosart.c
new file mode 100644
index 0000000..c871816
--- /dev/null
+++ b/drivers/hid/hid-mosart.c
@@ -0,0 +1,273 @@
+/*
+ * HID driver for the multitouch panel on the ASUS EeePC T91MT
+ *
+ * Copyright (c) 2009-2010 Stephane Chatty <chatty@enac.fr>
+ * Copyright (c) 2010 Teemu Tuominen <teemu.tuominen@cybercom.com>
+ *
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <linux/device.h>
+#include <linux/hid.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include "usbhid/usbhid.h"
+
+MODULE_AUTHOR("Stephane Chatty <chatty@enac.fr>");
+MODULE_DESCRIPTION("MosArt dual-touch panel");
+MODULE_LICENSE("GPL");
+
+#include "hid-ids.h"
+
+struct mosart_data {
+ __u16 x, y;
+ __u8 id;
+ bool valid; /* valid finger data, or just placeholder? */
+ bool first; /* is this the first finger in this frame? */
+ bool activity_now; /* at least one active finger in this frame? */
+ bool activity; /* at least one active finger previously? */
+};
+
+static int mosart_input_mapping(struct hid_device *hdev, struct hid_input *hi,
+ struct hid_field *field, struct hid_usage *usage,
+ unsigned long **bit, int *max)
+{
+ switch (usage->hid & HID_USAGE_PAGE) {
+
+ case HID_UP_GENDESK:
+ switch (usage->hid) {
+ case HID_GD_X:
+ hid_map_usage(hi, usage, bit, max,
+ EV_ABS, ABS_MT_POSITION_X);
+ /* touchscreen emulation */
+ input_set_abs_params(hi->input, ABS_X,
+ field->logical_minimum,
+ field->logical_maximum, 0, 0);
+ return 1;
+ case HID_GD_Y:
+ hid_map_usage(hi, usage, bit, max,
+ EV_ABS, ABS_MT_POSITION_Y);
+ /* touchscreen emulation */
+ input_set_abs_params(hi->input, ABS_Y,
+ field->logical_minimum,
+ field->logical_maximum, 0, 0);
+ return 1;
+ }
+ return 0;
+
+ case HID_UP_DIGITIZER:
+ switch (usage->hid) {
+ case HID_DG_CONFIDENCE:
+ case HID_DG_TIPSWITCH:
+ case HID_DG_INPUTMODE:
+ case HID_DG_DEVICEINDEX:
+ case HID_DG_CONTACTCOUNT:
+ case HID_DG_CONTACTMAX:
+ case HID_DG_TIPPRESSURE:
+ case HID_DG_WIDTH:
+ case HID_DG_HEIGHT:
+ return -1;
+ case HID_DG_INRANGE:
+ /* touchscreen emulation */
+ hid_map_usage(hi, usage, bit, max, EV_KEY, BTN_TOUCH);
+ return 1;
+
+ case HID_DG_CONTACTID:
+ hid_map_usage(hi, usage, bit, max,
+ EV_ABS, ABS_MT_TRACKING_ID);
+ return 1;
+
+ }
+ return 0;
+
+ case 0xff000000:
+ /* ignore HID features */
+ return -1;
+ }
+
+ return 0;
+}
+
+static int mosart_input_mapped(struct hid_device *hdev, struct hid_input *hi,
+ struct hid_field *field, struct hid_usage *usage,
+ unsigned long **bit, int *max)
+{
+ if (usage->type == EV_KEY || usage->type == EV_ABS)
+ clear_bit(usage->code, *bit);
+
+ return 0;
+}
+
+/*
+ * this function is called when a whole finger has been parsed,
+ * so that it can decide what to send to the input layer.
+ */
+static void mosart_filter_event(struct mosart_data *td, struct input_dev *input)
+{
+ td->first = !td->first; /* touchscreen emulation */
+
+ if (!td->valid) {
+ /*
+ * touchscreen emulation: if no finger in this frame is valid
+ * and there previously was finger activity, this is a release
+ */
+ if (!td->first && !td->activity_now && td->activity) {
+ input_event(input, EV_KEY, BTN_TOUCH, 0);
+ td->activity = false;
+ }
+ return;
+ }
+
+ input_event(input, EV_ABS, ABS_MT_TRACKING_ID, td->id);
+ input_event(input, EV_ABS, ABS_MT_POSITION_X, td->x);
+ input_event(input, EV_ABS, ABS_MT_POSITION_Y, td->y);
+
+ input_mt_sync(input);
+ td->valid = false;
+
+ /* touchscreen emulation: if first active finger in this frame... */
+ if (!td->activity_now) {
+ /* if there was no previous activity, emit touch event */
+ if (!td->activity) {
+ input_event(input, EV_KEY, BTN_TOUCH, 1);
+ td->activity = true;
+ }
+ td->activity_now = true;
+ /* and in any case this is our preferred finger */
+ input_event(input, EV_ABS, ABS_X, td->x);
+ input_event(input, EV_ABS, ABS_Y, td->y);
+ }
+}
+
+
+static int mosart_event(struct hid_device *hid, struct hid_field *field,
+ struct hid_usage *usage, __s32 value)
+{
+ struct mosart_data *td = hid_get_drvdata(hid);
+
+ if (hid->claimed & HID_CLAIMED_INPUT) {
+ struct input_dev *input = field->hidinput->input;
+ switch (usage->hid) {
+ case HID_DG_INRANGE:
+ td->valid = !!value;
+ break;
+ case HID_GD_X:
+ td->x = value;
+ break;
+ case HID_GD_Y:
+ td->y = value;
+ mosart_filter_event(td, input);
+ break;
+ case HID_DG_CONTACTID:
+ td->id = value;
+ break;
+ case HID_DG_CONTACTCOUNT:
+ /* touch emulation: this is the last field in a frame */
+ td->first = false;
+ td->activity_now = false;
+ break;
+ case HID_DG_CONFIDENCE:
+ case HID_DG_TIPSWITCH:
+ /* avoid interference from generic hidinput handling */
+ break;
+
+ default:
+ /* fallback to the generic hidinput handling */
+ return 0;
+ }
+ }
+
+ /* we have handled the hidinput part, now remains hiddev */
+ if (hid->claimed & HID_CLAIMED_HIDDEV && hid->hiddev_hid_event)
+ hid->hiddev_hid_event(hid, field, usage, value);
+
+ return 1;
+}
+
+static int mosart_probe(struct hid_device *hdev, const struct hid_device_id *id)
+{
+ int ret;
+ struct mosart_data *td;
+
+
+ td = kmalloc(sizeof(struct mosart_data), GFP_KERNEL);
+ if (!td) {
+ dev_err(&hdev->dev, "cannot allocate MosArt data\n");
+ return -ENOMEM;
+ }
+ td->valid = false;
+ td->activity = false;
+ td->activity_now = false;
+ td->first = false;
+ hid_set_drvdata(hdev, td);
+
+ /* currently, it's better to have one evdev device only */
+#if 0
+ hdev->quirks |= HID_QUIRK_MULTI_INPUT;
+#endif
+
+ ret = hid_parse(hdev);
+ if (ret == 0)
+ ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
+
+ if (ret == 0) {
+ struct hid_report_enum *re = hdev->report_enum
+ + HID_FEATURE_REPORT;
+ struct hid_report *r = re->report_id_hash[7];
+
+ r->field[0]->value[0] = 0x02;
+ usbhid_submit_report(hdev, r, USB_DIR_OUT);
+ } else
+ kfree(td);
+
+ return ret;
+}
+
+static void mosart_remove(struct hid_device *hdev)
+{
+ hid_hw_stop(hdev);
+ kfree(hid_get_drvdata(hdev));
+ hid_set_drvdata(hdev, NULL);
+}
+
+static const struct hid_device_id mosart_devices[] = {
+ { HID_USB_DEVICE(USB_VENDOR_ID_ASUS, USB_DEVICE_ID_ASUS_T91MT) },
+ { }
+};
+MODULE_DEVICE_TABLE(hid, mosart_devices);
+
+static const struct hid_usage_id mosart_grabbed_usages[] = {
+ { HID_ANY_ID, HID_ANY_ID, HID_ANY_ID },
+ { HID_ANY_ID - 1, HID_ANY_ID - 1, HID_ANY_ID - 1}
+};
+
+static struct hid_driver mosart_driver = {
+ .name = "mosart",
+ .id_table = mosart_devices,
+ .probe = mosart_probe,
+ .remove = mosart_remove,
+ .input_mapping = mosart_input_mapping,
+ .input_mapped = mosart_input_mapped,
+ .usage_table = mosart_grabbed_usages,
+ .event = mosart_event,
+};
+
+static int __init mosart_init(void)
+{
+ return hid_register_driver(&mosart_driver);
+}
+
+static void __exit mosart_exit(void)
+{
+ hid_unregister_driver(&mosart_driver);
+}
+
+module_init(mosart_init);
+module_exit(mosart_exit);
+
diff --git a/drivers/hid/hid-ntrig.c b/drivers/hid/hid-ntrig.c
index 49ce69d..3234c729 100644
--- a/drivers/hid/hid-ntrig.c
+++ b/drivers/hid/hid-ntrig.c
@@ -25,11 +25,16 @@
EV_KEY, (c))
struct ntrig_data {
- __s32 x, y, id, w, h;
- char reading_a_point, found_contact_id;
- char pen_active;
- char finger_active;
- char inverted;
+ /* Incoming raw values for a single contact */
+ __u16 x, y, w, h;
+ __u16 id;
+ __u8 confidence;
+
+ bool reading_mt;
+ __u8 first_contact_confidence;
+
+ __u8 mt_footer[4];
+ __u8 mt_foot_count;
};
/*
@@ -42,8 +47,11 @@
struct hid_field *field, struct hid_usage *usage,
unsigned long **bit, int *max)
{
- switch (usage->hid & HID_USAGE_PAGE) {
+ /* No special mappings needed for the pen and single touch */
+ if (field->physical)
+ return 0;
+ switch (usage->hid & HID_USAGE_PAGE) {
case HID_UP_GENDESK:
switch (usage->hid) {
case HID_GD_X:
@@ -66,18 +74,12 @@
case HID_UP_DIGITIZER:
switch (usage->hid) {
/* we do not want to map these for now */
- case HID_DG_CONTACTID: /* value is useless */
+ case HID_DG_CONTACTID: /* Not trustworthy, squelch for now */
case HID_DG_INPUTMODE:
case HID_DG_DEVICEINDEX:
- case HID_DG_CONTACTCOUNT:
case HID_DG_CONTACTMAX:
return -1;
- /* original mapping by Rafi Rubin */
- case HID_DG_CONFIDENCE:
- nt_map_key_clear(BTN_TOOL_DOUBLETAP);
- return 1;
-
/* width/height mapped on TouchMajor/TouchMinor/Orientation */
case HID_DG_WIDTH:
hid_map_usage(hi, usage, bit, max,
@@ -104,6 +106,10 @@
struct hid_field *field, struct hid_usage *usage,
unsigned long **bit, int *max)
{
+ /* No special mappings needed for the pen and single touch */
+ if (field->physical)
+ return 0;
+
if (usage->type == EV_KEY || usage->type == EV_REL
|| usage->type == EV_ABS)
clear_bit(usage->code, *bit);
@@ -123,31 +129,30 @@
struct input_dev *input = field->hidinput->input;
struct ntrig_data *nd = hid_get_drvdata(hid);
+ /* No special handling needed for the pen */
+ if (field->application == HID_DG_PEN)
+ return 0;
+
if (hid->claimed & HID_CLAIMED_INPUT) {
switch (usage->hid) {
-
- case HID_DG_INRANGE:
- if (field->application & 0x3)
- nd->pen_active = (value != 0);
- else
- nd->finger_active = (value != 0);
- return 0;
-
- case HID_DG_INVERT:
- nd->inverted = value;
- return 0;
-
+ case 0xff000001:
+ /* Tag indicating the start of a multitouch group */
+ nd->reading_mt = 1;
+ nd->first_contact_confidence = 0;
+ break;
+ case HID_DG_CONFIDENCE:
+ nd->confidence = value;
+ break;
case HID_GD_X:
nd->x = value;
- nd->reading_a_point = 1;
+ /* Clear the contact footer */
+ nd->mt_foot_count = 0;
break;
case HID_GD_Y:
nd->y = value;
break;
case HID_DG_CONTACTID:
nd->id = value;
- /* we receive this only when in multitouch mode */
- nd->found_contact_id = 1;
break;
case HID_DG_WIDTH:
nd->w = value;
@@ -159,35 +164,13 @@
* report received in a finger event. We want
* to emit a normal (X, Y) position
*/
- if (!nd->found_contact_id) {
- if (nd->pen_active && nd->finger_active) {
- input_report_key(input, BTN_TOOL_DOUBLETAP, 0);
- input_report_key(input, BTN_TOOL_DOUBLETAP, 1);
- }
+ if (!nd->reading_mt) {
+ input_report_key(input, BTN_TOOL_DOUBLETAP,
+ (nd->confidence != 0));
input_event(input, EV_ABS, ABS_X, nd->x);
input_event(input, EV_ABS, ABS_Y, nd->y);
}
break;
- case HID_DG_TIPPRESSURE:
- /*
- * when in single touch mode, this is the last
- * report received in a pen event. We want
- * to emit a normal (X, Y) position
- */
- if (! nd->found_contact_id) {
- if (nd->pen_active && nd->finger_active) {
- input_report_key(input,
- nd->inverted ? BTN_TOOL_RUBBER : BTN_TOOL_PEN
- , 0);
- input_report_key(input,
- nd->inverted ? BTN_TOOL_RUBBER : BTN_TOOL_PEN
- , 1);
- }
- input_event(input, EV_ABS, ABS_X, nd->x);
- input_event(input, EV_ABS, ABS_Y, nd->y);
- input_event(input, EV_ABS, ABS_PRESSURE, value);
- }
- break;
case 0xff000002:
/*
* we receive this when the device is in multitouch
@@ -195,10 +178,34 @@
* this usage tells if the contact point is real
* or a placeholder
*/
- if (!nd->reading_a_point || value != 1)
+
+ /* Shouldn't get more than 4 footer packets, so skip */
+ if (nd->mt_foot_count >= 4)
break;
+
+ nd->mt_footer[nd->mt_foot_count++] = value;
+
+ /* if the footer isn't complete break */
+ if (nd->mt_foot_count != 4)
+ break;
+
+ /* Pen activity signal, trigger end of touch. */
+ if (nd->mt_footer[2]) {
+ nd->confidence = 0;
+ break;
+ }
+
+ /* If the contact was invalid */
+ if (!(nd->confidence && nd->mt_footer[0])
+ || nd->w <= 250
+ || nd->h <= 190) {
+ nd->confidence = 0;
+ break;
+ }
+
/* emit a normal (X, Y) for the first point only */
if (nd->id == 0) {
+ nd->first_contact_confidence = nd->confidence;
input_event(input, EV_ABS, ABS_X, nd->x);
input_event(input, EV_ABS, ABS_Y, nd->y);
}
@@ -220,8 +227,39 @@
ABS_MT_TOUCH_MINOR, nd->w);
}
input_mt_sync(field->hidinput->input);
- nd->reading_a_point = 0;
- nd->found_contact_id = 0;
+ break;
+
+ case HID_DG_CONTACTCOUNT: /* End of a multitouch group */
+ if (!nd->reading_mt)
+ break;
+
+ nd->reading_mt = 0;
+
+ if (nd->first_contact_confidence) {
+ switch (value) {
+ case 0: /* for single touch devices */
+ case 1:
+ input_report_key(input,
+ BTN_TOOL_DOUBLETAP, 1);
+ break;
+ case 2:
+ input_report_key(input,
+ BTN_TOOL_TRIPLETAP, 1);
+ break;
+ case 3:
+ default:
+ input_report_key(input,
+ BTN_TOOL_QUADTAP, 1);
+ }
+ input_report_key(input, BTN_TOUCH, 1);
+ } else {
+ input_report_key(input,
+ BTN_TOOL_DOUBLETAP, 0);
+ input_report_key(input,
+ BTN_TOOL_TRIPLETAP, 0);
+ input_report_key(input,
+ BTN_TOOL_QUADTAP, 0);
+ }
break;
default:
@@ -231,8 +269,8 @@
}
/* we have handled the hidinput part, now remains hiddev */
- if (hid->claimed & HID_CLAIMED_HIDDEV && hid->hiddev_hid_event)
- hid->hiddev_hid_event(hid, field, usage, value);
+ if ((hid->claimed & HID_CLAIMED_HIDDEV) && hid->hiddev_hid_event)
+ hid->hiddev_hid_event(hid, field, usage, value);
return 1;
}
@@ -241,23 +279,67 @@
{
int ret;
struct ntrig_data *nd;
+ struct hid_input *hidinput;
+ struct input_dev *input;
+
+ if (id->driver_data)
+ hdev->quirks |= HID_QUIRK_MULTI_INPUT;
nd = kmalloc(sizeof(struct ntrig_data), GFP_KERNEL);
if (!nd) {
dev_err(&hdev->dev, "cannot allocate N-Trig data\n");
return -ENOMEM;
}
- nd->reading_a_point = 0;
- nd->found_contact_id = 0;
+
+ nd->reading_mt = 0;
hid_set_drvdata(hdev, nd);
ret = hid_parse(hdev);
- if (!ret)
- ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
+ if (ret) {
+ dev_err(&hdev->dev, "parse failed\n");
+ goto err_free;
+ }
- if (ret)
- kfree (nd);
+ ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT & ~HID_CONNECT_FF);
+ if (ret) {
+ dev_err(&hdev->dev, "hw start failed\n");
+ goto err_free;
+ }
+
+ list_for_each_entry(hidinput, &hdev->inputs, list) {
+ input = hidinput->input;
+ switch (hidinput->report->field[0]->application) {
+ case HID_DG_PEN:
+ input->name = "N-Trig Pen";
+ break;
+ case HID_DG_TOUCHSCREEN:
+ __clear_bit(BTN_TOOL_PEN, input->keybit);
+ /*
+ * A little something special to enable
+ * two and three finger taps.
+ */
+ __set_bit(BTN_TOOL_DOUBLETAP, input->keybit);
+ __set_bit(BTN_TOOL_TRIPLETAP, input->keybit);
+ __set_bit(BTN_TOOL_QUADTAP, input->keybit);
+ /*
+ * The physical touchscreen (single touch)
+ * input has a value for physical, whereas
+ * the multitouch only has logical input
+ * fields.
+ */
+ input->name =
+ (hidinput->report->field[0]
+ ->physical) ?
+ "N-Trig Touchscreen" :
+ "N-Trig MultiTouch";
+ break;
+ }
+ }
+
+ return 0;
+err_free:
+ kfree(nd);
return ret;
}
@@ -276,7 +358,7 @@
static const struct hid_usage_id ntrig_grabbed_usages[] = {
{ HID_ANY_ID, HID_ANY_ID, HID_ANY_ID },
- { HID_ANY_ID - 1, HID_ANY_ID - 1, HID_ANY_ID - 1}
+ { HID_ANY_ID - 1, HID_ANY_ID - 1, HID_ANY_ID - 1 }
};
static struct hid_driver ntrig_driver = {
diff --git a/drivers/hid/hid-ortek.c b/drivers/hid/hid-ortek.c
new file mode 100644
index 0000000..aa9a960
--- /dev/null
+++ b/drivers/hid/hid-ortek.c
@@ -0,0 +1,56 @@
+/*
+ * HID driver for Ortek WKB-2000 (wireless keyboard + mouse trackpad).
+ * Fixes LogicalMaximum error in USB report description, see
+ * http://bugzilla.kernel.org/show_bug.cgi?id=14787
+ *
+ * Copyright (c) 2010 Johnathon Harris <jmharris@gmail.com>
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <linux/device.h>
+#include <linux/hid.h>
+#include <linux/module.h>
+
+#include "hid-ids.h"
+
+static void ortek_report_fixup(struct hid_device *hdev, __u8 *rdesc,
+ unsigned int rsize)
+{
+ if (rsize >= 56 && rdesc[54] == 0x25 && rdesc[55] == 0x01) {
+ dev_info(&hdev->dev, "Fixing up Ortek WKB-2000 "
+ "report descriptor.\n");
+ rdesc[55] = 0x92;
+ }
+}
+
+static const struct hid_device_id ortek_devices[] = {
+ { HID_USB_DEVICE(USB_VENDOR_ID_ORTEK, USB_DEVICE_ID_ORTEK_WKB2000) },
+ { }
+};
+MODULE_DEVICE_TABLE(hid, ortek_devices);
+
+static struct hid_driver ortek_driver = {
+ .name = "ortek",
+ .id_table = ortek_devices,
+ .report_fixup = ortek_report_fixup
+};
+
+static int __init ortek_init(void)
+{
+ return hid_register_driver(&ortek_driver);
+}
+
+static void __exit ortek_exit(void)
+{
+ hid_unregister_driver(&ortek_driver);
+}
+
+module_init(ortek_init);
+module_exit(ortek_exit);
+MODULE_LICENSE("GPL");
diff --git a/drivers/hid/hid-quanta.c b/drivers/hid/hid-quanta.c
new file mode 100644
index 0000000..01dd51c
--- /dev/null
+++ b/drivers/hid/hid-quanta.c
@@ -0,0 +1,260 @@
+/*
+ * HID driver for Quanta Optical Touch dual-touch panels
+ *
+ * Copyright (c) 2009-2010 Stephane Chatty <chatty@enac.fr>
+ *
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <linux/device.h>
+#include <linux/hid.h>
+#include <linux/module.h>
+
+MODULE_AUTHOR("Stephane Chatty <chatty@enac.fr>");
+MODULE_DESCRIPTION("Quanta dual-touch panel");
+MODULE_LICENSE("GPL");
+
+#include "hid-ids.h"
+
+struct quanta_data {
+ __u16 x, y;
+ __u8 id;
+ bool valid; /* valid finger data, or just placeholder? */
+ bool first; /* is this the first finger in this frame? */
+ bool activity_now; /* at least one active finger in this frame? */
+ bool activity; /* at least one active finger previously? */
+};
+
+static int quanta_input_mapping(struct hid_device *hdev, struct hid_input *hi,
+ struct hid_field *field, struct hid_usage *usage,
+ unsigned long **bit, int *max)
+{
+ switch (usage->hid & HID_USAGE_PAGE) {
+
+ case HID_UP_GENDESK:
+ switch (usage->hid) {
+ case HID_GD_X:
+ hid_map_usage(hi, usage, bit, max,
+ EV_ABS, ABS_MT_POSITION_X);
+ /* touchscreen emulation */
+ input_set_abs_params(hi->input, ABS_X,
+ field->logical_minimum,
+ field->logical_maximum, 0, 0);
+ return 1;
+ case HID_GD_Y:
+ hid_map_usage(hi, usage, bit, max,
+ EV_ABS, ABS_MT_POSITION_Y);
+ /* touchscreen emulation */
+ input_set_abs_params(hi->input, ABS_Y,
+ field->logical_minimum,
+ field->logical_maximum, 0, 0);
+ return 1;
+ }
+ return 0;
+
+ case HID_UP_DIGITIZER:
+ switch (usage->hid) {
+ case HID_DG_CONFIDENCE:
+ case HID_DG_TIPSWITCH:
+ case HID_DG_INPUTMODE:
+ case HID_DG_DEVICEINDEX:
+ case HID_DG_CONTACTCOUNT:
+ case HID_DG_CONTACTMAX:
+ case HID_DG_TIPPRESSURE:
+ case HID_DG_WIDTH:
+ case HID_DG_HEIGHT:
+ return -1;
+ case HID_DG_INRANGE:
+ /* touchscreen emulation */
+ hid_map_usage(hi, usage, bit, max, EV_KEY, BTN_TOUCH);
+ return 1;
+ case HID_DG_CONTACTID:
+ hid_map_usage(hi, usage, bit, max,
+ EV_ABS, ABS_MT_TRACKING_ID);
+ return 1;
+ }
+ return 0;
+
+ case 0xff000000:
+ /* ignore vendor-specific features */
+ return -1;
+ }
+
+ return 0;
+}
+
+static int quanta_input_mapped(struct hid_device *hdev, struct hid_input *hi,
+ struct hid_field *field, struct hid_usage *usage,
+ unsigned long **bit, int *max)
+{
+ if (usage->type == EV_KEY || usage->type == EV_ABS)
+ clear_bit(usage->code, *bit);
+
+ return 0;
+}
+
+/*
+ * this function is called when a whole finger has been parsed,
+ * so that it can decide what to send to the input layer.
+ */
+static void quanta_filter_event(struct quanta_data *td, struct input_dev *input)
+{
+
+ td->first = !td->first; /* touchscreen emulation */
+
+ if (!td->valid) {
+ /*
+ * touchscreen emulation: if no finger in this frame is valid
+ * and there previously was finger activity, this is a release
+ */
+ if (!td->first && !td->activity_now && td->activity) {
+ input_event(input, EV_KEY, BTN_TOUCH, 0);
+ td->activity = false;
+ }
+ return;
+ }
+
+ input_event(input, EV_ABS, ABS_MT_TRACKING_ID, td->id);
+ input_event(input, EV_ABS, ABS_MT_POSITION_X, td->x);
+ input_event(input, EV_ABS, ABS_MT_POSITION_Y, td->y);
+
+ input_mt_sync(input);
+ td->valid = false;
+
+ /* touchscreen emulation: if first active finger in this frame... */
+ if (!td->activity_now) {
+ /* if there was no previous activity, emit touch event */
+ if (!td->activity) {
+ input_event(input, EV_KEY, BTN_TOUCH, 1);
+ td->activity = true;
+ }
+ td->activity_now = true;
+ /* and in any case this is our preferred finger */
+ input_event(input, EV_ABS, ABS_X, td->x);
+ input_event(input, EV_ABS, ABS_Y, td->y);
+ }
+}
+
+
+static int quanta_event(struct hid_device *hid, struct hid_field *field,
+ struct hid_usage *usage, __s32 value)
+{
+ struct quanta_data *td = hid_get_drvdata(hid);
+
+ if (hid->claimed & HID_CLAIMED_INPUT) {
+ struct input_dev *input = field->hidinput->input;
+
+ switch (usage->hid) {
+ case HID_DG_INRANGE:
+ td->valid = !!value;
+ break;
+ case HID_GD_X:
+ td->x = value;
+ break;
+ case HID_GD_Y:
+ td->y = value;
+ quanta_filter_event(td, input);
+ break;
+ case HID_DG_CONTACTID:
+ td->id = value;
+ break;
+ case HID_DG_CONTACTCOUNT:
+ /* touch emulation: this is the last field in a frame */
+ td->first = false;
+ td->activity_now = false;
+ break;
+ case HID_DG_CONFIDENCE:
+ case HID_DG_TIPSWITCH:
+ /* avoid interference from generic hidinput handling */
+ break;
+
+ default:
+ /* fallback to the generic hidinput handling */
+ return 0;
+ }
+ }
+
+ /* we have handled the hidinput part, now remains hiddev */
+ if (hid->claimed & HID_CLAIMED_HIDDEV && hid->hiddev_hid_event)
+ hid->hiddev_hid_event(hid, field, usage, value);
+
+ return 1;
+}
+
+static int quanta_probe(struct hid_device *hdev, const struct hid_device_id *id)
+{
+ int ret;
+ struct quanta_data *td;
+
+ td = kmalloc(sizeof(struct quanta_data), GFP_KERNEL);
+ if (!td) {
+ dev_err(&hdev->dev, "cannot allocate Quanta Touch data\n");
+ return -ENOMEM;
+ }
+ td->valid = false;
+ td->activity = false;
+ td->activity_now = false;
+ td->first = false;
+ hid_set_drvdata(hdev, td);
+
+ ret = hid_parse(hdev);
+ if (!ret)
+ ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
+
+ if (ret)
+ kfree(td);
+
+ return ret;
+}
+
+static void quanta_remove(struct hid_device *hdev)
+{
+ hid_hw_stop(hdev);
+ kfree(hid_get_drvdata(hdev));
+ hid_set_drvdata(hdev, NULL);
+}
+
+static const struct hid_device_id quanta_devices[] = {
+ { HID_USB_DEVICE(USB_VENDOR_ID_QUANTA,
+ USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_QUANTA,
+ USB_DEVICE_ID_PIXART_IMAGING_INC_OPTICAL_TOUCH_SCREEN) },
+ { }
+};
+MODULE_DEVICE_TABLE(hid, quanta_devices);
+
+static const struct hid_usage_id quanta_grabbed_usages[] = {
+ { HID_ANY_ID, HID_ANY_ID, HID_ANY_ID },
+ { HID_ANY_ID - 1, HID_ANY_ID - 1, HID_ANY_ID - 1}
+};
+
+static struct hid_driver quanta_driver = {
+ .name = "quanta-touch",
+ .id_table = quanta_devices,
+ .probe = quanta_probe,
+ .remove = quanta_remove,
+ .input_mapping = quanta_input_mapping,
+ .input_mapped = quanta_input_mapped,
+ .usage_table = quanta_grabbed_usages,
+ .event = quanta_event,
+};
+
+static int __init quanta_init(void)
+{
+ return hid_register_driver(&quanta_driver);
+}
+
+static void __exit quanta_exit(void)
+{
+ hid_unregister_driver(&quanta_driver);
+}
+
+module_init(quanta_init);
+module_exit(quanta_exit);
+
diff --git a/drivers/hid/hid-sony.c b/drivers/hid/hid-sony.c
index 4e84502..9bf00d7 100644
--- a/drivers/hid/hid-sony.c
+++ b/drivers/hid/hid-sony.c
@@ -48,7 +48,7 @@
* to "operational". Without this, the ps3 controller will not report any
* events.
*/
-static int sony_set_operational(struct hid_device *hdev)
+static int sony_set_operational_usb(struct hid_device *hdev)
{
struct usb_interface *intf = to_usb_interface(hdev->dev.parent);
struct usb_device *dev = interface_to_usbdev(intf);
@@ -73,6 +73,12 @@
return ret;
}
+static int sony_set_operational_bt(struct hid_device *hdev)
+{
+ unsigned char buf[] = { 0x53, 0xf4, 0x42, 0x03, 0x00, 0x00 };
+ return hdev->hid_output_raw_report(hdev, buf, sizeof(buf), HID_FEATURE_REPORT);
+}
+
static int sony_probe(struct hid_device *hdev, const struct hid_device_id *id)
{
int ret;
@@ -81,7 +87,7 @@
sc = kzalloc(sizeof(*sc), GFP_KERNEL);
if (sc == NULL) {
- dev_err(&hdev->dev, "can't alloc apple descriptor\n");
+ dev_err(&hdev->dev, "can't alloc sony descriptor\n");
return -ENOMEM;
}
@@ -101,7 +107,17 @@
goto err_free;
}
- ret = sony_set_operational(hdev);
+ switch (hdev->bus) {
+ case BUS_USB:
+ ret = sony_set_operational_usb(hdev);
+ break;
+ case BUS_BLUETOOTH:
+ ret = sony_set_operational_bt(hdev);
+ break;
+ default:
+ ret = 0;
+ }
+
if (ret < 0)
goto err_stop;
@@ -121,6 +137,7 @@
static const struct hid_device_id sony_devices[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER) },
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_VAIO_VGX_MOUSE),
.driver_data = VAIO_RDESC_CONSTANT },
{ }
diff --git a/drivers/hid/hid-stantum.c b/drivers/hid/hid-stantum.c
new file mode 100644
index 0000000..2e592a0
--- /dev/null
+++ b/drivers/hid/hid-stantum.c
@@ -0,0 +1,283 @@
+/*
+ * HID driver for Stantum multitouch panels
+ *
+ * Copyright (c) 2009 Stephane Chatty <chatty@enac.fr>
+ *
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <linux/device.h>
+#include <linux/hid.h>
+#include <linux/module.h>
+
+MODULE_AUTHOR("Stephane Chatty <chatty@enac.fr>");
+MODULE_DESCRIPTION("Stantum HID multitouch panels");
+MODULE_LICENSE("GPL");
+
+#include "hid-ids.h"
+
+struct stantum_data {
+ __s32 x, y, z, w, h; /* x, y, pressure, width, height */
+ __u16 id; /* touch id */
+ bool valid; /* valid finger data, or just placeholder? */
+ bool first; /* first finger in the HID packet? */
+ bool activity; /* at least one active finger so far? */
+};
+
+static int stantum_input_mapping(struct hid_device *hdev, struct hid_input *hi,
+ struct hid_field *field, struct hid_usage *usage,
+ unsigned long **bit, int *max)
+{
+ switch (usage->hid & HID_USAGE_PAGE) {
+
+ case HID_UP_GENDESK:
+ switch (usage->hid) {
+ case HID_GD_X:
+ hid_map_usage(hi, usage, bit, max,
+ EV_ABS, ABS_MT_POSITION_X);
+ /* touchscreen emulation */
+ input_set_abs_params(hi->input, ABS_X,
+ field->logical_minimum,
+ field->logical_maximum, 0, 0);
+ return 1;
+ case HID_GD_Y:
+ hid_map_usage(hi, usage, bit, max,
+ EV_ABS, ABS_MT_POSITION_Y);
+ /* touchscreen emulation */
+ input_set_abs_params(hi->input, ABS_Y,
+ field->logical_minimum,
+ field->logical_maximum, 0, 0);
+ return 1;
+ }
+ return 0;
+
+ case HID_UP_DIGITIZER:
+ switch (usage->hid) {
+ case HID_DG_INRANGE:
+ case HID_DG_CONFIDENCE:
+ case HID_DG_INPUTMODE:
+ case HID_DG_DEVICEINDEX:
+ case HID_DG_CONTACTCOUNT:
+ case HID_DG_CONTACTMAX:
+ return -1;
+
+ case HID_DG_TIPSWITCH:
+ /* touchscreen emulation */
+ hid_map_usage(hi, usage, bit, max, EV_KEY, BTN_TOUCH);
+ return 1;
+
+ case HID_DG_WIDTH:
+ hid_map_usage(hi, usage, bit, max,
+ EV_ABS, ABS_MT_TOUCH_MAJOR);
+ return 1;
+ case HID_DG_HEIGHT:
+ hid_map_usage(hi, usage, bit, max,
+ EV_ABS, ABS_MT_TOUCH_MINOR);
+ input_set_abs_params(hi->input, ABS_MT_ORIENTATION,
+ 1, 1, 0, 0);
+ return 1;
+ case HID_DG_TIPPRESSURE:
+ hid_map_usage(hi, usage, bit, max,
+ EV_ABS, ABS_MT_PRESSURE);
+ return 1;
+
+ case HID_DG_CONTACTID:
+ hid_map_usage(hi, usage, bit, max,
+ EV_ABS, ABS_MT_TRACKING_ID);
+ return 1;
+
+ }
+ return 0;
+
+ case 0xff000000:
+ /* no input-oriented meaning */
+ return -1;
+ }
+
+ return 0;
+}
+
+static int stantum_input_mapped(struct hid_device *hdev, struct hid_input *hi,
+ struct hid_field *field, struct hid_usage *usage,
+ unsigned long **bit, int *max)
+{
+ if (usage->type == EV_KEY || usage->type == EV_ABS)
+ clear_bit(usage->code, *bit);
+
+ return 0;
+}
+
+/*
+ * this function is called when a whole finger has been parsed,
+ * so that it can decide what to send to the input layer.
+ */
+static void stantum_filter_event(struct stantum_data *sd,
+ struct input_dev *input)
+{
+ bool wide;
+
+ if (!sd->valid) {
+ /*
+ * touchscreen emulation: if the first finger is not valid and
+ * there previously was finger activity, this is a release
+ */
+ if (sd->first && sd->activity) {
+ input_event(input, EV_KEY, BTN_TOUCH, 0);
+ sd->activity = false;
+ }
+ return;
+ }
+
+ input_event(input, EV_ABS, ABS_MT_TRACKING_ID, sd->id);
+ input_event(input, EV_ABS, ABS_MT_POSITION_X, sd->x);
+ input_event(input, EV_ABS, ABS_MT_POSITION_Y, sd->y);
+
+ wide = (sd->w > sd->h);
+ input_event(input, EV_ABS, ABS_MT_ORIENTATION, wide);
+ input_event(input, EV_ABS, ABS_MT_TOUCH_MAJOR, wide ? sd->w : sd->h);
+ input_event(input, EV_ABS, ABS_MT_TOUCH_MINOR, wide ? sd->h : sd->w);
+
+ input_event(input, EV_ABS, ABS_MT_PRESSURE, sd->z);
+
+ input_mt_sync(input);
+ sd->valid = false;
+
+ /* touchscreen emulation */
+ if (sd->first) {
+ if (!sd->activity) {
+ input_event(input, EV_KEY, BTN_TOUCH, 1);
+ sd->activity = true;
+ }
+ input_event(input, EV_ABS, ABS_X, sd->x);
+ input_event(input, EV_ABS, ABS_Y, sd->y);
+ }
+ sd->first = false;
+}
+
+
+static int stantum_event(struct hid_device *hid, struct hid_field *field,
+ struct hid_usage *usage, __s32 value)
+{
+ struct stantum_data *sd = hid_get_drvdata(hid);
+
+ if (hid->claimed & HID_CLAIMED_INPUT) {
+ struct input_dev *input = field->hidinput->input;
+
+ switch (usage->hid) {
+ case HID_DG_INRANGE:
+ /* this is the last field in a finger */
+ stantum_filter_event(sd, input);
+ break;
+ case HID_DG_WIDTH:
+ sd->w = value;
+ break;
+ case HID_DG_HEIGHT:
+ sd->h = value;
+ break;
+ case HID_GD_X:
+ sd->x = value;
+ break;
+ case HID_GD_Y:
+ sd->y = value;
+ break;
+ case HID_DG_TIPPRESSURE:
+ sd->z = value;
+ break;
+ case HID_DG_CONTACTID:
+ sd->id = value;
+ break;
+ case HID_DG_CONFIDENCE:
+ sd->valid = !!value;
+ break;
+ case 0xff000002:
+ /* this comes only before the first finger */
+ sd->first = true;
+ break;
+
+ default:
+ /* ignore the others */
+ return 1;
+ }
+ }
+
+ /* we have handled the hidinput part, now remains hiddev */
+ if (hid->claimed & HID_CLAIMED_HIDDEV && hid->hiddev_hid_event)
+ hid->hiddev_hid_event(hid, field, usage, value);
+
+ return 1;
+}
+
+static int stantum_probe(struct hid_device *hdev,
+ const struct hid_device_id *id)
+{
+ int ret;
+ struct stantum_data *sd;
+
+ sd = kmalloc(sizeof(struct stantum_data), GFP_KERNEL);
+ if (!sd) {
+ dev_err(&hdev->dev, "cannot allocate Stantum data\n");
+ return -ENOMEM;
+ }
+ sd->valid = false;
+ sd->first = false;
+ sd->activity = false;
+ hid_set_drvdata(hdev, sd);
+
+ ret = hid_parse(hdev);
+ if (!ret)
+ ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
+
+ if (ret)
+ kfree(sd);
+
+ return ret;
+}
+
+static void stantum_remove(struct hid_device *hdev)
+{
+ hid_hw_stop(hdev);
+ kfree(hid_get_drvdata(hdev));
+ hid_set_drvdata(hdev, NULL);
+}
+
+static const struct hid_device_id stantum_devices[] = {
+ { HID_USB_DEVICE(USB_VENDOR_ID_STANTUM, USB_DEVICE_ID_MTP) },
+ { }
+};
+MODULE_DEVICE_TABLE(hid, stantum_devices);
+
+static const struct hid_usage_id stantum_grabbed_usages[] = {
+ { HID_ANY_ID, HID_ANY_ID, HID_ANY_ID },
+ { HID_ANY_ID - 1, HID_ANY_ID - 1, HID_ANY_ID - 1}
+};
+
+static struct hid_driver stantum_driver = {
+ .name = "stantum",
+ .id_table = stantum_devices,
+ .probe = stantum_probe,
+ .remove = stantum_remove,
+ .input_mapping = stantum_input_mapping,
+ .input_mapped = stantum_input_mapped,
+ .usage_table = stantum_grabbed_usages,
+ .event = stantum_event,
+};
+
+static int __init stantum_init(void)
+{
+ return hid_register_driver(&stantum_driver);
+}
+
+static void __exit stantum_exit(void)
+{
+ hid_unregister_driver(&stantum_driver);
+}
+
+module_init(stantum_init);
+module_exit(stantum_exit);
+
diff --git a/drivers/hid/hid-wacom.c b/drivers/hid/hid-wacom.c
index 12dcda5..8d3b46f 100644
--- a/drivers/hid/hid-wacom.c
+++ b/drivers/hid/hid-wacom.c
@@ -156,7 +156,9 @@
struct hid_input *hidinput;
struct input_dev *input;
struct wacom_data *wdata;
+ char rep_data[2];
int ret;
+ int limit;
wdata = kzalloc(sizeof(*wdata), GFP_KERNEL);
if (wdata == NULL) {
@@ -166,6 +168,7 @@
hid_set_drvdata(hdev, wdata);
+ /* Parse the HID report now */
ret = hid_parse(hdev);
if (ret) {
dev_err(&hdev->dev, "parse failed\n");
@@ -178,6 +181,31 @@
goto err_free;
}
+ /*
+ * Note that if the raw queries fail, it's not a hard failure and it
+ * is safe to continue
+ */
+
+ /* Set Wacom mode2 */
+ rep_data[0] = 0x03; rep_data[1] = 0x00;
+ limit = 3;
+ do {
+ ret = hdev->hid_output_raw_report(hdev, rep_data, 2,
+ HID_FEATURE_REPORT);
+ } while (ret < 0 && limit-- > 0);
+ if (ret < 0)
+ dev_warn(&hdev->dev, "failed to poke device #1, %d\n", ret);
+
+ /* 0x06 - high reporting speed, 0x05 - low speed */
+ rep_data[0] = 0x06; rep_data[1] = 0x00;
+ limit = 3;
+ do {
+ ret = hdev->hid_output_raw_report(hdev, rep_data, 2,
+ HID_FEATURE_REPORT);
+ } while (ret < 0 && limit-- > 0);
+ if (ret < 0)
+ dev_warn(&hdev->dev, "failed to poke device #2, %d\n", ret);
+
hidinput = list_entry(hdev->inputs.next, struct hid_input, list);
input = hidinput->input;
diff --git a/drivers/hid/hidraw.c b/drivers/hid/hidraw.c
index cdd1369..d044767 100644
--- a/drivers/hid/hidraw.c
+++ b/drivers/hid/hidraw.c
@@ -134,7 +134,7 @@
goto out;
}
- ret = dev->hid_output_raw_report(dev, buf, count);
+ ret = dev->hid_output_raw_report(dev, buf, count, HID_OUTPUT_REPORT);
out:
kfree(buf);
return ret;
diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c
index e2997a8..56d06cd 100644
--- a/drivers/hid/usbhid/hid-core.c
+++ b/drivers/hid/usbhid/hid-core.c
@@ -5,7 +5,7 @@
* Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz>
* Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc
* Copyright (c) 2007-2008 Oliver Neukum
- * Copyright (c) 2006-2009 Jiri Kosina
+ * Copyright (c) 2006-2010 Jiri Kosina
*/
/*
@@ -316,6 +316,7 @@
err_hid("usb_submit_urb(out) failed");
return -1;
}
+ usbhid->last_out = jiffies;
} else {
/*
* queue work to wake up the device.
@@ -377,6 +378,7 @@
err_hid("usb_submit_urb(ctrl) failed");
return -1;
}
+ usbhid->last_ctrl = jiffies;
} else {
/*
* queue work to wake up the device.
@@ -512,9 +514,20 @@
usbhid->out[usbhid->outhead].report = report;
usbhid->outhead = head;
- if (!test_and_set_bit(HID_OUT_RUNNING, &usbhid->iofl))
+ if (!test_and_set_bit(HID_OUT_RUNNING, &usbhid->iofl)) {
if (hid_submit_out(hid))
clear_bit(HID_OUT_RUNNING, &usbhid->iofl);
+ } else {
+ /*
+ * the queue is known to run
+ * but an earlier request may be stuck
+ * we may need to time out
+ * no race because this is called under
+ * spinlock
+ */
+ if (time_after(jiffies, usbhid->last_out + HZ * 5))
+ usb_unlink_urb(usbhid->urbout);
+ }
return;
}
@@ -535,9 +548,20 @@
usbhid->ctrl[usbhid->ctrlhead].dir = dir;
usbhid->ctrlhead = head;
- if (!test_and_set_bit(HID_CTRL_RUNNING, &usbhid->iofl))
+ if (!test_and_set_bit(HID_CTRL_RUNNING, &usbhid->iofl)) {
if (hid_submit_ctrl(hid))
clear_bit(HID_CTRL_RUNNING, &usbhid->iofl);
+ } else {
+ /*
+ * the queue is known to run
+ * but an earlier request may be stuck
+ * we may need to time out
+ * no race because this is called under
+ * spinlock
+ */
+ if (time_after(jiffies, usbhid->last_ctrl + HZ * 5))
+ usb_unlink_urb(usbhid->urbctrl);
+ }
}
void usbhid_submit_report(struct hid_device *hid, struct hid_report *report, unsigned char dir)
@@ -774,7 +798,8 @@
return 0;
}
-static int usbhid_output_raw_report(struct hid_device *hid, __u8 *buf, size_t count)
+static int usbhid_output_raw_report(struct hid_device *hid, __u8 *buf, size_t count,
+ unsigned char report_type)
{
struct usbhid_device *usbhid = hid->driver_data;
struct usb_device *dev = hid_to_usb_dev(hid);
@@ -785,7 +810,7 @@
ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
HID_REQ_SET_REPORT,
USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
- ((HID_OUTPUT_REPORT + 1) << 8) | *buf,
+ ((report_type + 1) << 8) | *buf,
interface->desc.bInterfaceNumber, buf + 1, count - 1,
USB_CTRL_SET_TIMEOUT);
@@ -981,9 +1006,6 @@
spin_lock_init(&usbhid->lock);
- usbhid->intf = intf;
- usbhid->ifnum = interface->desc.bInterfaceNumber;
-
usbhid->urbctrl = usb_alloc_urb(0, GFP_KERNEL);
if (!usbhid->urbctrl) {
ret = -ENOMEM;
@@ -1154,6 +1176,8 @@
hid->driver_data = usbhid;
usbhid->hid = hid;
+ usbhid->intf = intf;
+ usbhid->ifnum = interface->desc.bInterfaceNumber;
ret = hid_add_device(hid);
if (ret) {
@@ -1342,7 +1366,7 @@
#endif /* CONFIG_PM */
-static struct usb_device_id hid_usb_ids [] = {
+static const struct usb_device_id hid_usb_ids[] = {
{ .match_flags = USB_DEVICE_ID_MATCH_INT_CLASS,
.bInterfaceClass = USB_INTERFACE_CLASS_HID },
{ } /* Terminating entry */
diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c
index 38773dc..7844280 100644
--- a/drivers/hid/usbhid/hid-quirks.c
+++ b/drivers/hid/usbhid/hid-quirks.c
@@ -43,8 +43,10 @@
{ USB_VENDOR_ID_AFATECH, USB_DEVICE_ID_AFATECH_AF9016, HID_QUIRK_FULLSPEED_INTERVAL },
+ { USB_VENDOR_ID_ETURBOTOUCH, USB_DEVICE_ID_ETURBOTOUCH, HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_PANTHERLORD, USB_DEVICE_ID_PANTHERLORD_TWIN_USB_JOYSTICK, HID_QUIRK_MULTI_INPUT | HID_QUIRK_SKIP_OUTPUT_REPORTS },
{ USB_VENDOR_ID_PLAYDOTCOM, USB_DEVICE_ID_PLAYDOTCOM_EMS_USBII, HID_QUIRK_MULTI_INPUT },
+ { USB_VENDOR_ID_TOUCHPACK, USB_DEVICE_ID_TOUCHPACK_RTS, HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_UC100KM, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_CS124U, HID_QUIRK_NOGET },
@@ -57,6 +59,7 @@
{ USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_3AXIS_5BUTTON_STICK, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_DMI, USB_DEVICE_ID_DMI_ENC, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_ELO, USB_DEVICE_ID_ELO_TS2700, HID_QUIRK_NOGET },
+ { USB_VENDOR_ID_PRODIGE, USB_DEVICE_ID_PRODIGE_CORDLESS, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_SUN, USB_DEVICE_ID_RARITAN_KVM_DONGLE, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_TURBOX, USB_DEVICE_ID_TURBOX_KEYBOARD, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_PF1209, HID_QUIRK_MULTI_INPUT },
diff --git a/drivers/hid/usbhid/usbhid.h b/drivers/hid/usbhid/usbhid.h
index 08f505c..ec20400 100644
--- a/drivers/hid/usbhid/usbhid.h
+++ b/drivers/hid/usbhid/usbhid.h
@@ -80,12 +80,14 @@
unsigned char ctrlhead, ctrltail; /* Control fifo head & tail */
char *ctrlbuf; /* Control buffer */
dma_addr_t ctrlbuf_dma; /* Control buffer dma */
+ unsigned long last_ctrl; /* record of last output for timeouts */
struct urb *urbout; /* Output URB */
struct hid_output_fifo out[HID_CONTROL_FIFO_SIZE]; /* Output pipe fifo */
unsigned char outhead, outtail; /* Output pipe fifo head & tail */
char *outbuf; /* Output buffer */
dma_addr_t outbuf_dma; /* Output buffer dma */
+ unsigned long last_out; /* record of last output for timeouts */
spinlock_t lock; /* fifo spinlock */
unsigned long iofl; /* I/O flags (CTRL_RUNNING, OUT_RUNNING) */
diff --git a/drivers/isdn/hisax/Kconfig b/drivers/isdn/hisax/Kconfig
index 3464ebc..452fde9 100644
--- a/drivers/isdn/hisax/Kconfig
+++ b/drivers/isdn/hisax/Kconfig
@@ -109,7 +109,7 @@
config HISAX_TELESPCI
bool "Teles PCI"
- depends on PCI && PCI_LEGACY && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV))
+ depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV))
help
This enables HiSax support for the Teles PCI.
See <file:Documentation/isdn/README.HiSax> on how to configure it.
@@ -237,7 +237,7 @@
config HISAX_NETJET
bool "NETjet card"
- depends on PCI && PCI_LEGACY && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV))
+ depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV))
help
This enables HiSax support for the NetJet from Traverse
Technologies.
@@ -248,7 +248,7 @@
config HISAX_NETJET_U
bool "NETspider U card"
- depends on PCI && PCI_LEGACY && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV))
+ depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV))
help
This enables HiSax support for the Netspider U interface ISDN card
from Traverse Technologies.
@@ -287,7 +287,7 @@
config HISAX_BKM_A4T
bool "Telekom A4T card"
- depends on PCI && PCI_LEGACY
+ depends on PCI
help
This enables HiSax support for the Telekom A4T card.
@@ -297,7 +297,7 @@
config HISAX_SCT_QUADRO
bool "Scitel Quadro card"
- depends on PCI && PCI_LEGACY
+ depends on PCI
help
This enables HiSax support for the Scitel Quadro card.
@@ -316,7 +316,7 @@
config HISAX_HFC_PCI
bool "HFC PCI-Bus cards"
- depends on PCI && PCI_LEGACY && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV))
+ depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV))
help
This enables HiSax support for the HFC-S PCI 2BDS0 based cards.
@@ -325,7 +325,7 @@
config HISAX_W6692
bool "Winbond W6692 based cards"
- depends on PCI && PCI_LEGACY
+ depends on PCI
help
This enables HiSax support for Winbond W6692 based PCI ISDN cards.
@@ -341,7 +341,7 @@
config HISAX_ENTERNOW_PCI
bool "Formula-n enter:now PCI card"
- depends on HISAX_NETJET && PCI && PCI_LEGACY && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV))
+ depends on HISAX_NETJET && PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV))
help
This enables HiSax support for the Formula-n enter:now PCI
ISDN card.
@@ -412,7 +412,7 @@
config HISAX_FRITZ_PCIPNP
tristate "AVM Fritz!Card PCI/PCIv2/PnP support (EXPERIMENTAL)"
- depends on PCI && PCI_LEGACY && EXPERIMENTAL
+ depends on PCI && EXPERIMENTAL
help
This enables the driver for the AVM Fritz!Card PCI,
Fritz!Card PCI v2 and Fritz!Card PnP.
diff --git a/drivers/isdn/hisax/avm_pci.c b/drivers/isdn/hisax/avm_pci.c
index 7cabc5a..14295a1 100644
--- a/drivers/isdn/hisax/avm_pci.c
+++ b/drivers/isdn/hisax/avm_pci.c
@@ -822,7 +822,7 @@
#endif /* __ISAPNP__ */
-#ifndef CONFIG_PCI_LEGACY
+#ifndef CONFIG_PCI
static int __devinit avm_pci_setup(struct IsdnCardState *cs)
{
@@ -835,7 +835,7 @@
static int __devinit avm_pci_setup(struct IsdnCardState *cs)
{
- if ((dev_avm = pci_find_device(PCI_VENDOR_ID_AVM,
+ if ((dev_avm = hisax_find_pci_device(PCI_VENDOR_ID_AVM,
PCI_DEVICE_ID_AVM_A1, dev_avm))) {
if (pci_enable_device(dev_avm))
@@ -864,7 +864,7 @@
return (1);
}
-#endif /* CONFIG_PCI_LEGACY */
+#endif /* CONFIG_PCI */
int __devinit
setup_avm_pcipnp(struct IsdnCard *card)
diff --git a/drivers/isdn/hisax/bkm_a4t.c b/drivers/isdn/hisax/bkm_a4t.c
index 9ca2ee5..9f2009c 100644
--- a/drivers/isdn/hisax/bkm_a4t.c
+++ b/drivers/isdn/hisax/bkm_a4t.c
@@ -340,7 +340,7 @@
} else
return (0);
- while ((dev_a4t = pci_find_device(PCI_VENDOR_ID_ZORAN,
+ while ((dev_a4t = hisax_find_pci_device(PCI_VENDOR_ID_ZORAN,
PCI_DEVICE_ID_ZORAN_36120, dev_a4t))) {
ret = a4t_pci_probe(dev_a4t, cs, &found, &pci_memaddr);
if (!ret)
diff --git a/drivers/isdn/hisax/bkm_a8.c b/drivers/isdn/hisax/bkm_a8.c
index e1ff471..e775706 100644
--- a/drivers/isdn/hisax/bkm_a8.c
+++ b/drivers/isdn/hisax/bkm_a8.c
@@ -301,7 +301,7 @@
(sub_vendor_id != PCI_VENDOR_ID_BERKOM)))
return (0);
if (cs->subtyp == SCT_1) {
- while ((dev_a8 = pci_find_device(PCI_VENDOR_ID_PLX,
+ while ((dev_a8 = hisax_find_pci_device(PCI_VENDOR_ID_PLX,
PCI_DEVICE_ID_PLX_9050, dev_a8))) {
sub_vendor_id = dev_a8->subsystem_vendor;
diff --git a/drivers/isdn/hisax/diva.c b/drivers/isdn/hisax/diva.c
index 0b0c2e5..780da9b 100644
--- a/drivers/isdn/hisax/diva.c
+++ b/drivers/isdn/hisax/diva.c
@@ -1148,7 +1148,7 @@
#endif /* ISAPNP */
-#ifdef CONFIG_PCI_LEGACY
+#ifdef CONFIG_PCI
static struct pci_dev *dev_diva __devinitdata = NULL;
static struct pci_dev *dev_diva_u __devinitdata = NULL;
static struct pci_dev *dev_diva201 __devinitdata = NULL;
@@ -1159,21 +1159,21 @@
struct IsdnCardState *cs = card->cs;
cs->subtyp = 0;
- if ((dev_diva = pci_find_device(PCI_VENDOR_ID_EICON,
+ if ((dev_diva = hisax_find_pci_device(PCI_VENDOR_ID_EICON,
PCI_DEVICE_ID_EICON_DIVA20, dev_diva))) {
if (pci_enable_device(dev_diva))
return(0);
cs->subtyp = DIVA_PCI;
cs->irq = dev_diva->irq;
cs->hw.diva.cfg_reg = pci_resource_start(dev_diva, 2);
- } else if ((dev_diva_u = pci_find_device(PCI_VENDOR_ID_EICON,
+ } else if ((dev_diva_u = hisax_find_pci_device(PCI_VENDOR_ID_EICON,
PCI_DEVICE_ID_EICON_DIVA20_U, dev_diva_u))) {
if (pci_enable_device(dev_diva_u))
return(0);
cs->subtyp = DIVA_PCI;
cs->irq = dev_diva_u->irq;
cs->hw.diva.cfg_reg = pci_resource_start(dev_diva_u, 2);
- } else if ((dev_diva201 = pci_find_device(PCI_VENDOR_ID_EICON,
+ } else if ((dev_diva201 = hisax_find_pci_device(PCI_VENDOR_ID_EICON,
PCI_DEVICE_ID_EICON_DIVA201, dev_diva201))) {
if (pci_enable_device(dev_diva201))
return(0);
@@ -1183,7 +1183,7 @@
(ulong) ioremap(pci_resource_start(dev_diva201, 0), 4096);
cs->hw.diva.cfg_reg =
(ulong) ioremap(pci_resource_start(dev_diva201, 1), 4096);
- } else if ((dev_diva202 = pci_find_device(PCI_VENDOR_ID_EICON,
+ } else if ((dev_diva202 = hisax_find_pci_device(PCI_VENDOR_ID_EICON,
PCI_DEVICE_ID_EICON_DIVA202, dev_diva202))) {
if (pci_enable_device(dev_diva202))
return(0);
@@ -1229,14 +1229,14 @@
return (1); /* card found */
}
-#else /* if !CONFIG_PCI_LEGACY */
+#else /* if !CONFIG_PCI */
static int __devinit setup_diva_pci(struct IsdnCard *card)
{
return (-1); /* card not found; continue search */
}
-#endif /* CONFIG_PCI_LEGACY */
+#endif /* CONFIG_PCI */
int __devinit
setup_diva(struct IsdnCard *card)
diff --git a/drivers/isdn/hisax/elsa.c b/drivers/isdn/hisax/elsa.c
index aa29d1c..23c41fc 100644
--- a/drivers/isdn/hisax/elsa.c
+++ b/drivers/isdn/hisax/elsa.c
@@ -1025,7 +1025,7 @@
cs->irq);
}
-#ifdef CONFIG_PCI_LEGACY
+#ifdef CONFIG_PCI
static struct pci_dev *dev_qs1000 __devinitdata = NULL;
static struct pci_dev *dev_qs3000 __devinitdata = NULL;
@@ -1035,7 +1035,7 @@
struct IsdnCardState *cs = card->cs;
cs->subtyp = 0;
- if ((dev_qs1000 = pci_find_device(PCI_VENDOR_ID_ELSA,
+ if ((dev_qs1000 = hisax_find_pci_device(PCI_VENDOR_ID_ELSA,
PCI_DEVICE_ID_ELSA_MICROLINK, dev_qs1000))) {
if (pci_enable_device(dev_qs1000))
return(0);
@@ -1043,7 +1043,7 @@
cs->irq = dev_qs1000->irq;
cs->hw.elsa.cfg = pci_resource_start(dev_qs1000, 1);
cs->hw.elsa.base = pci_resource_start(dev_qs1000, 3);
- } else if ((dev_qs3000 = pci_find_device(PCI_VENDOR_ID_ELSA,
+ } else if ((dev_qs3000 = hisax_find_pci_device(PCI_VENDOR_ID_ELSA,
PCI_DEVICE_ID_ELSA_QS3000, dev_qs3000))) {
if (pci_enable_device(dev_qs3000))
return(0);
@@ -1093,7 +1093,7 @@
{
return (1);
}
-#endif /* CONFIG_PCI_LEGACY */
+#endif /* CONFIG_PCI */
static int __devinit
setup_elsa_common(struct IsdnCard *card)
diff --git a/drivers/isdn/hisax/enternow_pci.c b/drivers/isdn/hisax/enternow_pci.c
index 39f421e..26264ab 100644
--- a/drivers/isdn/hisax/enternow_pci.c
+++ b/drivers/isdn/hisax/enternow_pci.c
@@ -406,7 +406,7 @@
for ( ;; )
{
- if ((dev_netjet = pci_find_device(PCI_VENDOR_ID_TIGERJET,
+ if ((dev_netjet = hisax_find_pci_device(PCI_VENDOR_ID_TIGERJET,
PCI_DEVICE_ID_TIGERJET_300, dev_netjet))) {
ret = en_pci_probe(dev_netjet, cs);
if (!ret)
diff --git a/drivers/isdn/hisax/gazel.c b/drivers/isdn/hisax/gazel.c
index 0ea3b46..353982f 100644
--- a/drivers/isdn/hisax/gazel.c
+++ b/drivers/isdn/hisax/gazel.c
@@ -531,7 +531,7 @@
return (0);
}
-#ifdef CONFIG_PCI_LEGACY
+#ifdef CONFIG_PCI
static struct pci_dev *dev_tel __devinitdata = NULL;
static int __devinit
@@ -546,7 +546,7 @@
found = 0;
seekcard = PCI_DEVICE_ID_PLX_R685;
for (nbseek = 0; nbseek < 4; nbseek++) {
- if ((dev_tel = pci_find_device(PCI_VENDOR_ID_PLX,
+ if ((dev_tel = hisax_find_pci_device(PCI_VENDOR_ID_PLX,
seekcard, dev_tel))) {
if (pci_enable_device(dev_tel))
return 1;
@@ -620,7 +620,7 @@
return (0);
}
-#endif /* CONFIG_PCI_LEGACY */
+#endif /* CONFIG_PCI */
int __devinit
setup_gazel(struct IsdnCard *card)
@@ -640,7 +640,7 @@
return (0);
} else {
-#ifdef CONFIG_PCI_LEGACY
+#ifdef CONFIG_PCI
if (setup_gazelpci(cs))
return (0);
#else
diff --git a/drivers/isdn/hisax/hfc_pci.c b/drivers/isdn/hisax/hfc_pci.c
index 1091473..917cc84 100644
--- a/drivers/isdn/hisax/hfc_pci.c
+++ b/drivers/isdn/hisax/hfc_pci.c
@@ -1658,7 +1658,7 @@
i = 0;
while (id_list[i].vendor_id) {
- tmp_hfcpci = pci_find_device(id_list[i].vendor_id,
+ tmp_hfcpci = hisax_find_pci_device(id_list[i].vendor_id,
id_list[i].device_id,
dev_hfcpci);
i++;
diff --git a/drivers/isdn/hisax/hisax.h b/drivers/isdn/hisax/hisax.h
index 0685c19..832a878 100644
--- a/drivers/isdn/hisax/hisax.h
+++ b/drivers/isdn/hisax/hisax.h
@@ -1323,3 +1323,26 @@
char *HiSax_getrev(const char *revision);
int TeiNew(void);
void TeiFree(void);
+
+#ifdef CONFIG_PCI
+
+#include <linux/pci.h>
+
+/* adaptation wrapper for old usage
+ * WARNING! This is unfit for use in a PCI hotplug environment,
+ * as the returned PCI device can disappear at any moment in time.
+ * Callers should be converted to use pci_get_device() instead.
+ */
+static inline struct pci_dev *hisax_find_pci_device(unsigned int vendor,
+ unsigned int device,
+ struct pci_dev *from)
+{
+ struct pci_dev *pdev;
+
+ pci_dev_get(from);
+ pdev = pci_get_subsys(vendor, device, PCI_ANY_ID, PCI_ANY_ID, from);
+ pci_dev_put(pdev);
+ return pdev;
+}
+
+#endif
diff --git a/drivers/isdn/hisax/niccy.c b/drivers/isdn/hisax/niccy.c
index ef00633..ccaa6e1 100644
--- a/drivers/isdn/hisax/niccy.c
+++ b/drivers/isdn/hisax/niccy.c
@@ -297,12 +297,12 @@
return 0;
}
} else {
-#ifdef CONFIG_PCI_LEGACY
+#ifdef CONFIG_PCI
static struct pci_dev *niccy_dev __devinitdata;
u_int pci_ioaddr;
cs->subtyp = 0;
- if ((niccy_dev = pci_find_device(PCI_VENDOR_ID_SATSAGEM,
+ if ((niccy_dev = hisax_find_pci_device(PCI_VENDOR_ID_SATSAGEM,
PCI_DEVICE_ID_SATSAGEM_NICCY,
niccy_dev))) {
if (pci_enable_device(niccy_dev))
@@ -354,7 +354,7 @@
printk(KERN_WARNING "Niccy: io0 0 and NO_PCI_BIOS\n");
printk(KERN_WARNING "Niccy: unable to config NICCY PCI\n");
return 0;
-#endif /* CONFIG_PCI_LEGACY */
+#endif /* CONFIG_PCI */
}
printk(KERN_INFO "HiSax: NICCY %s config irq:%d data:0x%X ale:0x%X\n",
(cs->subtyp == 1) ? "PnP" : "PCI",
diff --git a/drivers/isdn/hisax/nj_s.c b/drivers/isdn/hisax/nj_s.c
index 8d36ccc..2344e7b 100644
--- a/drivers/isdn/hisax/nj_s.c
+++ b/drivers/isdn/hisax/nj_s.c
@@ -276,7 +276,7 @@
for ( ;; )
{
- if ((dev_netjet = pci_find_device(PCI_VENDOR_ID_TIGERJET,
+ if ((dev_netjet = hisax_find_pci_device(PCI_VENDOR_ID_TIGERJET,
PCI_DEVICE_ID_TIGERJET_300, dev_netjet))) {
ret = njs_pci_probe(dev_netjet, cs);
if (!ret)
diff --git a/drivers/isdn/hisax/nj_u.c b/drivers/isdn/hisax/nj_u.c
index d306c94..095e974 100644
--- a/drivers/isdn/hisax/nj_u.c
+++ b/drivers/isdn/hisax/nj_u.c
@@ -240,7 +240,7 @@
for ( ;; )
{
- if ((dev_netjet = pci_find_device(PCI_VENDOR_ID_TIGERJET,
+ if ((dev_netjet = hisax_find_pci_device(PCI_VENDOR_ID_TIGERJET,
PCI_DEVICE_ID_TIGERJET_300, dev_netjet))) {
ret = nju_pci_probe(dev_netjet, cs);
if (!ret)
diff --git a/drivers/isdn/hisax/sedlbauer.c b/drivers/isdn/hisax/sedlbauer.c
index 5569a52..69dfc8d 100644
--- a/drivers/isdn/hisax/sedlbauer.c
+++ b/drivers/isdn/hisax/sedlbauer.c
@@ -598,7 +598,7 @@
}
#endif /* __ISAPNP__ */
-#ifdef CONFIG_PCI_LEGACY
+#ifdef CONFIG_PCI
static struct pci_dev *dev_sedl __devinitdata = NULL;
static int __devinit
@@ -607,7 +607,7 @@
struct IsdnCardState *cs = card->cs;
u16 sub_vendor_id, sub_id;
- if ((dev_sedl = pci_find_device(PCI_VENDOR_ID_TIGERJET,
+ if ((dev_sedl = hisax_find_pci_device(PCI_VENDOR_ID_TIGERJET,
PCI_DEVICE_ID_TIGERJET_100, dev_sedl))) {
if (pci_enable_device(dev_sedl))
return(0);
@@ -673,7 +673,7 @@
return (1);
}
-#endif /* CONFIG_PCI_LEGACY */
+#endif /* CONFIG_PCI */
int __devinit
setup_sedlbauer(struct IsdnCard *card)
diff --git a/drivers/isdn/hisax/telespci.c b/drivers/isdn/hisax/telespci.c
index 28b08de..b85ceb3 100644
--- a/drivers/isdn/hisax/telespci.c
+++ b/drivers/isdn/hisax/telespci.c
@@ -300,7 +300,7 @@
if (cs->typ != ISDN_CTYPE_TELESPCI)
return (0);
- if ((dev_tel = pci_find_device (PCI_VENDOR_ID_ZORAN, PCI_DEVICE_ID_ZORAN_36120, dev_tel))) {
+ if ((dev_tel = hisax_find_pci_device (PCI_VENDOR_ID_ZORAN, PCI_DEVICE_ID_ZORAN_36120, dev_tel))) {
if (pci_enable_device(dev_tel))
return(0);
cs->irq = dev_tel->irq;
diff --git a/drivers/isdn/hisax/w6692.c b/drivers/isdn/hisax/w6692.c
index c4d862c..9d6e864 100644
--- a/drivers/isdn/hisax/w6692.c
+++ b/drivers/isdn/hisax/w6692.c
@@ -1007,7 +1007,7 @@
return (0);
while (id_list[id_idx].vendor_id) {
- dev_w6692 = pci_find_device(id_list[id_idx].vendor_id,
+ dev_w6692 = hisax_find_pci_device(id_list[id_idx].vendor_id,
id_list[id_idx].device_id,
dev_w6692);
if (dev_w6692) {
diff --git a/drivers/macintosh/adb.c b/drivers/macintosh/adb.c
index 23741cec..d840a10 100644
--- a/drivers/macintosh/adb.c
+++ b/drivers/macintosh/adb.c
@@ -322,8 +322,8 @@
adb_controller = NULL;
} else {
#ifdef CONFIG_PPC
- if (machine_is_compatible("AAPL,PowerBook1998") ||
- machine_is_compatible("PowerBook1,1"))
+ if (of_machine_is_compatible("AAPL,PowerBook1998") ||
+ of_machine_is_compatible("PowerBook1,1"))
sleepy_trackpad = 1;
#endif /* CONFIG_PPC */
diff --git a/drivers/macintosh/therm_pm72.c b/drivers/macintosh/therm_pm72.c
index 454bc50..5738d8b 100644
--- a/drivers/macintosh/therm_pm72.c
+++ b/drivers/macintosh/therm_pm72.c
@@ -1899,7 +1899,7 @@
*/
if (rackmac)
cpu_pid_type = CPU_PID_TYPE_RACKMAC;
- else if (machine_is_compatible("PowerMac7,3")
+ else if (of_machine_is_compatible("PowerMac7,3")
&& (cpu_count > 1)
&& fcu_fans[CPUA_PUMP_RPM_INDEX].id != FCU_FAN_ABSENT_ID
&& fcu_fans[CPUB_PUMP_RPM_INDEX].id != FCU_FAN_ABSENT_ID) {
@@ -2234,10 +2234,10 @@
{
struct device_node *np;
- rackmac = machine_is_compatible("RackMac3,1");
+ rackmac = of_machine_is_compatible("RackMac3,1");
- if (!machine_is_compatible("PowerMac7,2") &&
- !machine_is_compatible("PowerMac7,3") &&
+ if (!of_machine_is_compatible("PowerMac7,2") &&
+ !of_machine_is_compatible("PowerMac7,3") &&
!rackmac)
return -ENODEV;
diff --git a/drivers/macintosh/therm_windtunnel.c b/drivers/macintosh/therm_windtunnel.c
index ba48fd7..7fb8b4d 100644
--- a/drivers/macintosh/therm_windtunnel.c
+++ b/drivers/macintosh/therm_windtunnel.c
@@ -490,7 +490,7 @@
info = of_get_property(np, "thermal-info", NULL);
of_node_put(np);
- if( !info || !machine_is_compatible("PowerMac3,6") )
+ if( !info || !of_machine_is_compatible("PowerMac3,6") )
return -ENODEV;
if( info->id != 3 ) {
diff --git a/drivers/macintosh/via-pmu-backlight.c b/drivers/macintosh/via-pmu-backlight.c
index a348bb0..4f3c447 100644
--- a/drivers/macintosh/via-pmu-backlight.c
+++ b/drivers/macintosh/via-pmu-backlight.c
@@ -150,13 +150,13 @@
/* Special case for the old PowerBook since I can't test on it */
autosave =
- machine_is_compatible("AAPL,3400/2400") ||
- machine_is_compatible("AAPL,3500");
+ of_machine_is_compatible("AAPL,3400/2400") ||
+ of_machine_is_compatible("AAPL,3500");
if (!autosave &&
!pmac_has_backlight_type("pmu") &&
- !machine_is_compatible("AAPL,PowerBook1998") &&
- !machine_is_compatible("PowerBook1,1"))
+ !of_machine_is_compatible("AAPL,PowerBook1998") &&
+ !of_machine_is_compatible("PowerBook1,1"))
return;
snprintf(name, sizeof(name), "pmubl");
diff --git a/drivers/macintosh/via-pmu.c b/drivers/macintosh/via-pmu.c
index db379c3..4276484 100644
--- a/drivers/macintosh/via-pmu.c
+++ b/drivers/macintosh/via-pmu.c
@@ -463,8 +463,8 @@
#endif
#ifdef CONFIG_PPC32
- if (machine_is_compatible("AAPL,3400/2400") ||
- machine_is_compatible("AAPL,3500")) {
+ if (of_machine_is_compatible("AAPL,3400/2400") ||
+ of_machine_is_compatible("AAPL,3500")) {
int mb = pmac_call_feature(PMAC_FTR_GET_MB_INFO,
NULL, PMAC_MB_INFO_MODEL, 0);
pmu_battery_count = 1;
@@ -472,8 +472,8 @@
pmu_batteries[0].flags |= PMU_BATT_TYPE_COMET;
else
pmu_batteries[0].flags |= PMU_BATT_TYPE_HOOPER;
- } else if (machine_is_compatible("AAPL,PowerBook1998") ||
- machine_is_compatible("PowerBook1,1")) {
+ } else if (of_machine_is_compatible("AAPL,PowerBook1998") ||
+ of_machine_is_compatible("PowerBook1,1")) {
pmu_battery_count = 2;
pmu_batteries[0].flags |= PMU_BATT_TYPE_SMART;
pmu_batteries[1].flags |= PMU_BATT_TYPE_SMART;
diff --git a/drivers/macintosh/windfarm_core.c b/drivers/macintosh/windfarm_core.c
index 075b4d9..437f55c 100644
--- a/drivers/macintosh/windfarm_core.c
+++ b/drivers/macintosh/windfarm_core.c
@@ -468,9 +468,9 @@
DBG("wf: core loaded\n");
/* Don't register on old machines that use therm_pm72 for now */
- if (machine_is_compatible("PowerMac7,2") ||
- machine_is_compatible("PowerMac7,3") ||
- machine_is_compatible("RackMac3,1"))
+ if (of_machine_is_compatible("PowerMac7,2") ||
+ of_machine_is_compatible("PowerMac7,3") ||
+ of_machine_is_compatible("RackMac3,1"))
return -ENODEV;
platform_device_register(&wf_platform_device);
return 0;
diff --git a/drivers/macintosh/windfarm_cpufreq_clamp.c b/drivers/macintosh/windfarm_cpufreq_clamp.c
index 900aade..1a77a7c 100644
--- a/drivers/macintosh/windfarm_cpufreq_clamp.c
+++ b/drivers/macintosh/windfarm_cpufreq_clamp.c
@@ -76,9 +76,9 @@
struct wf_control *clamp;
/* Don't register on old machines that use therm_pm72 for now */
- if (machine_is_compatible("PowerMac7,2") ||
- machine_is_compatible("PowerMac7,3") ||
- machine_is_compatible("RackMac3,1"))
+ if (of_machine_is_compatible("PowerMac7,2") ||
+ of_machine_is_compatible("PowerMac7,3") ||
+ of_machine_is_compatible("RackMac3,1"))
return -ENODEV;
clamp = kmalloc(sizeof(struct wf_control), GFP_KERNEL);
diff --git a/drivers/macintosh/windfarm_lm75_sensor.c b/drivers/macintosh/windfarm_lm75_sensor.c
index ed6426a..d8257d3 100644
--- a/drivers/macintosh/windfarm_lm75_sensor.c
+++ b/drivers/macintosh/windfarm_lm75_sensor.c
@@ -239,9 +239,9 @@
static int __init wf_lm75_sensor_init(void)
{
/* Don't register on old machines that use therm_pm72 for now */
- if (machine_is_compatible("PowerMac7,2") ||
- machine_is_compatible("PowerMac7,3") ||
- machine_is_compatible("RackMac3,1"))
+ if (of_machine_is_compatible("PowerMac7,2") ||
+ of_machine_is_compatible("PowerMac7,3") ||
+ of_machine_is_compatible("RackMac3,1"))
return -ENODEV;
return i2c_add_driver(&wf_lm75_driver);
}
diff --git a/drivers/macintosh/windfarm_max6690_sensor.c b/drivers/macintosh/windfarm_max6690_sensor.c
index a67b349..b486eb9 100644
--- a/drivers/macintosh/windfarm_max6690_sensor.c
+++ b/drivers/macintosh/windfarm_max6690_sensor.c
@@ -188,9 +188,9 @@
static int __init wf_max6690_sensor_init(void)
{
/* Don't register on old machines that use therm_pm72 for now */
- if (machine_is_compatible("PowerMac7,2") ||
- machine_is_compatible("PowerMac7,3") ||
- machine_is_compatible("RackMac3,1"))
+ if (of_machine_is_compatible("PowerMac7,2") ||
+ of_machine_is_compatible("PowerMac7,3") ||
+ of_machine_is_compatible("RackMac3,1"))
return -ENODEV;
return i2c_add_driver(&wf_max6690_driver);
}
diff --git a/drivers/macintosh/windfarm_pm112.c b/drivers/macintosh/windfarm_pm112.c
index 73d695d..e0ee807 100644
--- a/drivers/macintosh/windfarm_pm112.c
+++ b/drivers/macintosh/windfarm_pm112.c
@@ -676,7 +676,7 @@
{
struct device_node *cpu;
- if (!machine_is_compatible("PowerMac11,2"))
+ if (!of_machine_is_compatible("PowerMac11,2"))
return -ENODEV;
/* Count the number of CPU cores */
diff --git a/drivers/macintosh/windfarm_pm121.c b/drivers/macintosh/windfarm_pm121.c
index 66ec4fb1..947d4af 100644
--- a/drivers/macintosh/windfarm_pm121.c
+++ b/drivers/macintosh/windfarm_pm121.c
@@ -1008,7 +1008,7 @@
{
int rc = -ENODEV;
- if (machine_is_compatible("PowerMac12,1"))
+ if (of_machine_is_compatible("PowerMac12,1"))
rc = pm121_init_pm();
if (rc == 0) {
diff --git a/drivers/macintosh/windfarm_pm81.c b/drivers/macintosh/windfarm_pm81.c
index abbe206..565d5b2 100644
--- a/drivers/macintosh/windfarm_pm81.c
+++ b/drivers/macintosh/windfarm_pm81.c
@@ -779,8 +779,8 @@
{
int rc = -ENODEV;
- if (machine_is_compatible("PowerMac8,1") ||
- machine_is_compatible("PowerMac8,2"))
+ if (of_machine_is_compatible("PowerMac8,1") ||
+ of_machine_is_compatible("PowerMac8,2"))
rc = wf_init_pm();
if (rc == 0) {
diff --git a/drivers/macintosh/windfarm_pm91.c b/drivers/macintosh/windfarm_pm91.c
index 764c525..bea9916 100644
--- a/drivers/macintosh/windfarm_pm91.c
+++ b/drivers/macintosh/windfarm_pm91.c
@@ -711,7 +711,7 @@
{
int rc = -ENODEV;
- if (machine_is_compatible("PowerMac9,1"))
+ if (of_machine_is_compatible("PowerMac9,1"))
rc = wf_init_pm();
if (rc == 0) {
diff --git a/drivers/macintosh/windfarm_smu_sensors.c b/drivers/macintosh/windfarm_smu_sensors.c
index 9c567b9..3c19350 100644
--- a/drivers/macintosh/windfarm_smu_sensors.c
+++ b/drivers/macintosh/windfarm_smu_sensors.c
@@ -363,9 +363,9 @@
* I yet have to figure out what's up with 8,2 and will have to
* adjust for later, unless we can 100% trust the SDB partition...
*/
- if ((machine_is_compatible("PowerMac8,1") ||
- machine_is_compatible("PowerMac8,2") ||
- machine_is_compatible("PowerMac9,1")) &&
+ if ((of_machine_is_compatible("PowerMac8,1") ||
+ of_machine_is_compatible("PowerMac8,2") ||
+ of_machine_is_compatible("PowerMac9,1")) &&
cpuvcp_version >= 2) {
pow->quadratic = 1;
DBG("windfarm: CPU Power using quadratic transform\n");
diff --git a/drivers/media/IR/Makefile b/drivers/media/IR/Makefile
index df5ddb4..171890e 100644
--- a/drivers/media/IR/Makefile
+++ b/drivers/media/IR/Makefile
@@ -1,5 +1,5 @@
ir-common-objs := ir-functions.o ir-keymaps.o
-ir-core-objs := ir-keytable.o
+ir-core-objs := ir-keytable.o ir-sysfs.o
obj-$(CONFIG_IR_CORE) += ir-core.o
obj-$(CONFIG_VIDEO_IR) += ir-common.o
diff --git a/drivers/media/IR/ir-functions.c b/drivers/media/IR/ir-functions.c
index 776a136..ab06919 100644
--- a/drivers/media/IR/ir-functions.c
+++ b/drivers/media/IR/ir-functions.c
@@ -52,7 +52,7 @@
/* -------------------------------------------------------------------------- */
int ir_input_init(struct input_dev *dev, struct ir_input_state *ir,
- int ir_type)
+ const u64 ir_type)
{
ir->ir_type = ir_type;
diff --git a/drivers/media/IR/ir-keymaps.c b/drivers/media/IR/ir-keymaps.c
index 9bbe6b1..0efdefe 100644
--- a/drivers/media/IR/ir-keymaps.c
+++ b/drivers/media/IR/ir-keymaps.c
@@ -3393,3 +3393,102 @@
};
EXPORT_SYMBOL_GPL(ir_codes_nec_terratec_cinergy_xs_table);
+
+/* Leadtek Winfast TV USB II Deluxe remote
+ Magnus Alm <magnus.alm@gmail.com>
+ */
+static struct ir_scancode ir_codes_winfast_usbii_deluxe[] = {
+ { 0x62, KEY_0},
+ { 0x75, KEY_1},
+ { 0x76, KEY_2},
+ { 0x77, KEY_3},
+ { 0x79, KEY_4},
+ { 0x7a, KEY_5},
+ { 0x7b, KEY_6},
+ { 0x7d, KEY_7},
+ { 0x7e, KEY_8},
+ { 0x7f, KEY_9},
+
+ { 0x38, KEY_CAMERA}, /* SNAPSHOT */
+ { 0x37, KEY_RECORD}, /* RECORD */
+ { 0x35, KEY_TIME}, /* TIMESHIFT */
+
+ { 0x74, KEY_VOLUMEUP}, /* VOLUMEUP */
+ { 0x78, KEY_VOLUMEDOWN}, /* VOLUMEDOWN */
+ { 0x64, KEY_MUTE}, /* MUTE */
+
+ { 0x21, KEY_CHANNEL}, /* SURF */
+ { 0x7c, KEY_CHANNELUP}, /* CHANNELUP */
+ { 0x60, KEY_CHANNELDOWN}, /* CHANNELDOWN */
+ { 0x61, KEY_LAST}, /* LAST CHANNEL (RECALL) */
+
+ { 0x72, KEY_VIDEO}, /* INPUT MODES (TV/FM) */
+
+ { 0x70, KEY_POWER2}, /* TV ON/OFF */
+
+ { 0x39, KEY_CYCLEWINDOWS}, /* MINIMIZE (BOSS) */
+ { 0x3a, KEY_NEW}, /* PIP */
+ { 0x73, KEY_ZOOM}, /* FULLSECREEN */
+
+ { 0x66, KEY_INFO}, /* OSD (DISPLAY) */
+
+ { 0x31, KEY_DOT}, /* '.' */
+ { 0x63, KEY_ENTER}, /* ENTER */
+
+};
+struct ir_scancode_table ir_codes_winfast_usbii_deluxe_table = {
+ .scan = ir_codes_winfast_usbii_deluxe,
+ .size = ARRAY_SIZE(ir_codes_winfast_usbii_deluxe),
+};
+EXPORT_SYMBOL_GPL(ir_codes_winfast_usbii_deluxe_table);
+
+/* Kworld 315U
+ */
+static struct ir_scancode ir_codes_kworld_315u[] = {
+ { 0x6143, KEY_POWER },
+ { 0x6101, KEY_TUNER }, /* source */
+ { 0x610b, KEY_ZOOM },
+ { 0x6103, KEY_POWER2 }, /* shutdown */
+
+ { 0x6104, KEY_1 },
+ { 0x6108, KEY_2 },
+ { 0x6102, KEY_3 },
+ { 0x6109, KEY_CHANNELUP },
+
+ { 0x610f, KEY_4 },
+ { 0x6105, KEY_5 },
+ { 0x6106, KEY_6 },
+ { 0x6107, KEY_CHANNELDOWN },
+
+ { 0x610c, KEY_7 },
+ { 0x610d, KEY_8 },
+ { 0x610a, KEY_9 },
+ { 0x610e, KEY_VOLUMEUP },
+
+ { 0x6110, KEY_LAST },
+ { 0x6111, KEY_0 },
+ { 0x6112, KEY_ENTER },
+ { 0x6113, KEY_VOLUMEDOWN },
+
+ { 0x6114, KEY_RECORD },
+ { 0x6115, KEY_STOP },
+ { 0x6116, KEY_PLAY },
+ { 0x6117, KEY_MUTE },
+
+ { 0x6118, KEY_UP },
+ { 0x6119, KEY_DOWN },
+ { 0x611a, KEY_LEFT },
+ { 0x611b, KEY_RIGHT },
+
+ { 0x611c, KEY_RED },
+ { 0x611d, KEY_GREEN },
+ { 0x611e, KEY_YELLOW },
+ { 0x611f, KEY_BLUE },
+};
+
+struct ir_scancode_table ir_codes_kworld_315u_table = {
+ .scan = ir_codes_kworld_315u,
+ .size = ARRAY_SIZE(ir_codes_kworld_315u),
+ .ir_type = IR_TYPE_NEC,
+};
+EXPORT_SYMBOL_GPL(ir_codes_kworld_315u_table);
diff --git a/drivers/media/IR/ir-keytable.c b/drivers/media/IR/ir-keytable.c
index b521ed9..0903f53 100644
--- a/drivers/media/IR/ir-keytable.c
+++ b/drivers/media/IR/ir-keytable.c
@@ -65,7 +65,7 @@
* In order to reduce the quantity of table resizes, it has a minimum
* table size of IR_TAB_MIN_SIZE.
*/
-int ir_roundup_tablesize(int n_elems)
+static int ir_roundup_tablesize(int n_elems)
{
size_t size;
@@ -81,7 +81,6 @@
return n_elems;
}
-EXPORT_SYMBOL_GPL(ir_roundup_tablesize);
/**
* ir_copy_table() - copies a keytable, discarding the unused entries
@@ -89,9 +88,11 @@
* @origin: origin table
*
* Copies all entries where the keycode is not KEY_UNKNOWN/KEY_RESERVED
+ * Also copies table size and table protocol.
+ * NOTE: It shouldn't copy the lock field
*/
-int ir_copy_table(struct ir_scancode_table *destin,
+static int ir_copy_table(struct ir_scancode_table *destin,
const struct ir_scancode_table *origin)
{
int i, j = 0;
@@ -105,12 +106,12 @@
j++;
}
destin->size = j;
+ destin->ir_type = origin->ir_type;
IR_dprintk(1, "Copied %d scancodes to the new keycode table\n", destin->size);
return 0;
}
-EXPORT_SYMBOL_GPL(ir_copy_table);
/**
* ir_getkeycode() - get a keycode at the evdev scancode ->keycode table
@@ -184,18 +185,14 @@
int newsize = rc_tab->size - 1;
int resize = ir_is_resize_needed(rc_tab, newsize);
struct ir_scancode *oldkeymap = rc_tab->scan;
- struct ir_scancode *newkeymap;
+ struct ir_scancode *newkeymap = NULL;
- if (resize) {
+ if (resize)
newkeymap = kzalloc(ir_roundup_tablesize(newsize) *
sizeof(*newkeymap), GFP_ATOMIC);
- /* There's no memory for resize. Keep the old table */
- if (!newkeymap)
- resize = 0;
- }
-
- if (!resize) {
+ /* There's no memory for resize. Keep the old table */
+ if (!resize || !newkeymap) {
newkeymap = oldkeymap;
/* We'll modify the live table. Lock it */
@@ -399,12 +396,14 @@
* @input_dev: the struct input_dev descriptor of the device
* @rc_tab: the struct ir_scancode_table table of scancode/keymap
*
- * This routine is used to initialize the input infrastructure to work with
- * an IR.
- * It should be called before registering the IR device.
+ * This routine is used to initialize the input infrastructure
+ * to work with an IR.
+ * It will register the input/evdev interface for the device and
+ * register the syfs code for IR class
*/
int ir_input_register(struct input_dev *input_dev,
- struct ir_scancode_table *rc_tab)
+ const struct ir_scancode_table *rc_tab,
+ const struct ir_dev_props *props)
{
struct ir_input_dev *ir_dev;
struct ir_scancode *keymap = rc_tab->scan;
@@ -417,19 +416,22 @@
if (!ir_dev)
return -ENOMEM;
- spin_lock_init(&rc_tab->lock);
+ spin_lock_init(&ir_dev->rc_tab.lock);
ir_dev->rc_tab.size = ir_roundup_tablesize(rc_tab->size);
ir_dev->rc_tab.scan = kzalloc(ir_dev->rc_tab.size *
sizeof(struct ir_scancode), GFP_KERNEL);
- if (!ir_dev->rc_tab.scan)
+ if (!ir_dev->rc_tab.scan) {
+ kfree(ir_dev);
return -ENOMEM;
+ }
IR_dprintk(1, "Allocated space for %d keycode entries (%zd bytes)\n",
ir_dev->rc_tab.size,
ir_dev->rc_tab.size * sizeof(ir_dev->rc_tab.scan));
ir_copy_table(&ir_dev->rc_tab, rc_tab);
+ ir_dev->props = props;
/* set the bits for the keys */
IR_dprintk(1, "key map size: %d\n", rc_tab->size);
@@ -447,16 +449,31 @@
input_set_drvdata(input_dev, ir_dev);
rc = input_register_device(input_dev);
+ if (rc < 0)
+ goto err;
+
+ rc = ir_register_class(input_dev);
if (rc < 0) {
- kfree(rc_tab->scan);
- kfree(ir_dev);
- input_set_drvdata(input_dev, NULL);
+ input_unregister_device(input_dev);
+ goto err;
}
+ return 0;
+
+err:
+ kfree(rc_tab->scan);
+ kfree(ir_dev);
+ input_set_drvdata(input_dev, NULL);
return rc;
}
EXPORT_SYMBOL_GPL(ir_input_register);
+/**
+ * ir_input_unregister() - unregisters IR and frees resources
+ * @input_dev: the struct input_dev descriptor of the device
+
+ * This routine is used to free memory and de-register interfaces.
+ */
void ir_input_unregister(struct input_dev *dev)
{
struct ir_input_dev *ir_dev = input_get_drvdata(dev);
@@ -472,6 +489,8 @@
kfree(rc_tab->scan);
rc_tab->scan = NULL;
+ ir_unregister_class(dev);
+
kfree(ir_dev);
input_unregister_device(dev);
}
diff --git a/drivers/media/IR/ir-sysfs.c b/drivers/media/IR/ir-sysfs.c
new file mode 100644
index 0000000..bf5fbcd
--- /dev/null
+++ b/drivers/media/IR/ir-sysfs.c
@@ -0,0 +1,211 @@
+/* ir-register.c - handle IR scancode->keycode tables
+ *
+ * Copyright (C) 2009 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/input.h>
+#include <linux/device.h>
+#include <media/ir-core.h>
+
+#define IRRCV_NUM_DEVICES 256
+
+/* bit array to represent IR sysfs device number */
+static unsigned long ir_core_dev_number;
+
+/* class for /sys/class/irrcv */
+static struct class *ir_input_class;
+
+/**
+ * show_protocol() - shows the current IR protocol
+ * @d: the device descriptor
+ * @mattr: the device attribute struct (unused)
+ * @buf: a pointer to the output buffer
+ *
+ * This routine is a callback routine for input read the IR protocol type.
+ * it is trigged by reading /sys/class/irrcv/irrcv?/current_protocol.
+ * It returns the protocol name, as understood by the driver.
+ */
+static ssize_t show_protocol(struct device *d,
+ struct device_attribute *mattr, char *buf)
+{
+ char *s;
+ struct ir_input_dev *ir_dev = dev_get_drvdata(d);
+ u64 ir_type = ir_dev->rc_tab.ir_type;
+
+ IR_dprintk(1, "Current protocol is %lld\n", (long long)ir_type);
+
+ /* FIXME: doesn't support multiple protocols at the same time */
+ if (ir_type == IR_TYPE_UNKNOWN)
+ s = "Unknown";
+ else if (ir_type == IR_TYPE_RC5)
+ s = "RC-5";
+ else if (ir_type == IR_TYPE_PD)
+ s = "Pulse/distance";
+ else if (ir_type == IR_TYPE_NEC)
+ s = "NEC";
+ else
+ s = "Other";
+
+ return sprintf(buf, "%s\n", s);
+}
+
+/**
+ * store_protocol() - shows the current IR protocol
+ * @d: the device descriptor
+ * @mattr: the device attribute struct (unused)
+ * @buf: a pointer to the input buffer
+ * @len: length of the input buffer
+ *
+ * This routine is a callback routine for changing the IR protocol type.
+ * it is trigged by reading /sys/class/irrcv/irrcv?/current_protocol.
+ * It changes the IR the protocol name, if the IR type is recognized
+ * by the driver.
+ * If an unknown protocol name is used, returns -EINVAL.
+ */
+static ssize_t store_protocol(struct device *d,
+ struct device_attribute *mattr,
+ const char *data,
+ size_t len)
+{
+ struct ir_input_dev *ir_dev = dev_get_drvdata(d);
+ u64 ir_type = IR_TYPE_UNKNOWN;
+ int rc = -EINVAL;
+ unsigned long flags;
+ char *buf;
+
+ buf = strsep((char **) &data, "\n");
+
+ if (!strcasecmp(buf, "rc-5"))
+ ir_type = IR_TYPE_RC5;
+ else if (!strcasecmp(buf, "pd"))
+ ir_type = IR_TYPE_PD;
+ else if (!strcasecmp(buf, "nec"))
+ ir_type = IR_TYPE_NEC;
+
+ if (ir_type == IR_TYPE_UNKNOWN) {
+ IR_dprintk(1, "Error setting protocol to %lld\n",
+ (long long)ir_type);
+ return -EINVAL;
+ }
+
+ if (ir_dev->props && ir_dev->props->change_protocol)
+ rc = ir_dev->props->change_protocol(ir_dev->props->priv,
+ ir_type);
+
+ if (rc < 0) {
+ IR_dprintk(1, "Error setting protocol to %lld\n",
+ (long long)ir_type);
+ return -EINVAL;
+ }
+
+ spin_lock_irqsave(&ir_dev->rc_tab.lock, flags);
+ ir_dev->rc_tab.ir_type = ir_type;
+ spin_unlock_irqrestore(&ir_dev->rc_tab.lock, flags);
+
+ IR_dprintk(1, "Current protocol is %lld\n",
+ (long long)ir_type);
+
+ return len;
+}
+
+/*
+ * Static device attribute struct with the sysfs attributes for IR's
+ */
+static DEVICE_ATTR(current_protocol, S_IRUGO | S_IWUSR,
+ show_protocol, store_protocol);
+
+static struct attribute *ir_dev_attrs[] = {
+ &dev_attr_current_protocol.attr,
+ NULL,
+};
+
+/**
+ * ir_register_class() - creates the sysfs for /sys/class/irrcv/irrcv?
+ * @input_dev: the struct input_dev descriptor of the device
+ *
+ * This routine is used to register the syfs code for IR class
+ */
+int ir_register_class(struct input_dev *input_dev)
+{
+ int rc;
+ struct kobject *kobj;
+
+ struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
+ int devno = find_first_zero_bit(&ir_core_dev_number,
+ IRRCV_NUM_DEVICES);
+
+ if (unlikely(devno < 0))
+ return devno;
+
+ ir_dev->attr.attrs = ir_dev_attrs;
+ ir_dev->class_dev = device_create(ir_input_class, NULL,
+ input_dev->dev.devt, ir_dev,
+ "irrcv%d", devno);
+ kobj = &ir_dev->class_dev->kobj;
+
+ printk(KERN_WARNING "Creating IR device %s\n", kobject_name(kobj));
+ rc = sysfs_create_group(kobj, &ir_dev->attr);
+ if (unlikely(rc < 0)) {
+ device_destroy(ir_input_class, input_dev->dev.devt);
+ return -ENOMEM;
+ }
+
+ ir_dev->devno = devno;
+ set_bit(devno, &ir_core_dev_number);
+
+ return 0;
+};
+
+/**
+ * ir_unregister_class() - removes the sysfs for sysfs for
+ * /sys/class/irrcv/irrcv?
+ * @input_dev: the struct input_dev descriptor of the device
+ *
+ * This routine is used to unregister the syfs code for IR class
+ */
+void ir_unregister_class(struct input_dev *input_dev)
+{
+ struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
+ struct kobject *kobj;
+
+ clear_bit(ir_dev->devno, &ir_core_dev_number);
+
+ kobj = &ir_dev->class_dev->kobj;
+
+ sysfs_remove_group(kobj, &ir_dev->attr);
+ device_destroy(ir_input_class, input_dev->dev.devt);
+
+ kfree(ir_dev->attr.name);
+}
+
+/*
+ * Init/exit code for the module. Basically, creates/removes /sys/class/irrcv
+ */
+
+static int __init ir_core_init(void)
+{
+ ir_input_class = class_create(THIS_MODULE, "irrcv");
+ if (IS_ERR(ir_input_class)) {
+ printk(KERN_ERR "ir_core: unable to register irrcv class\n");
+ return PTR_ERR(ir_input_class);
+ }
+
+ return 0;
+}
+
+static void __exit ir_core_exit(void)
+{
+ class_destroy(ir_input_class);
+}
+
+module_init(ir_core_init);
+module_exit(ir_core_exit);
diff --git a/drivers/media/common/saa7146_fops.c b/drivers/media/common/saa7146_fops.c
index 7364b964..fd8e1f4 100644
--- a/drivers/media/common/saa7146_fops.c
+++ b/drivers/media/common/saa7146_fops.c
@@ -423,14 +423,15 @@
}
}
+int saa7146_vv_devinit(struct saa7146_dev *dev)
+{
+ return v4l2_device_register(&dev->pci->dev, &dev->v4l2_dev);
+}
+EXPORT_SYMBOL_GPL(saa7146_vv_devinit);
+
int saa7146_vv_init(struct saa7146_dev* dev, struct saa7146_ext_vv *ext_vv)
{
struct saa7146_vv *vv;
- int err;
-
- err = v4l2_device_register(&dev->pci->dev, &dev->v4l2_dev);
- if (err)
- return err;
vv = kzalloc(sizeof(struct saa7146_vv), GFP_KERNEL);
if (vv == NULL) {
diff --git a/drivers/media/common/tuners/tuner-types.c b/drivers/media/common/tuners/tuner-types.c
index 2b876f3..d9aaaca 100644
--- a/drivers/media/common/tuners/tuner-types.c
+++ b/drivers/media/common/tuners/tuner-types.c
@@ -1337,6 +1337,22 @@
},
};
+/* ---------------------- TUNER_SONY_BTF_PXN01Z ------------------------ */
+
+static struct tuner_range tuner_sony_btf_pxn01z_ranges[] = {
+ { 16 * 137.25 /*MHz*/, 0x8e, 0x01, },
+ { 16 * 367.25 /*MHz*/, 0x8e, 0x02, },
+ { 16 * 999.99 , 0x8e, 0x04, },
+};
+
+static struct tuner_params tuner_sony_btf_pxn01z_params[] = {
+ {
+ .type = TUNER_PARAM_TYPE_NTSC,
+ .ranges = tuner_sony_btf_pxn01z_ranges,
+ .count = ARRAY_SIZE(tuner_sony_btf_pxn01z_ranges),
+ },
+};
+
/* --------------------------------------------------------------------- */
struct tunertype tuners[] = {
@@ -1805,6 +1821,11 @@
.name = "NXP TDA18271",
/* see tda18271-fe.c for details */
},
+ [TUNER_SONY_BTF_PXN01Z] = {
+ .name = "Sony BTF-Pxn01Z",
+ .params = tuner_sony_btf_pxn01z_params,
+ .count = ARRAY_SIZE(tuner_sony_btf_pxn01z_params),
+ },
};
EXPORT_SYMBOL(tuners);
diff --git a/drivers/media/common/tuners/tuner-xc2028.c b/drivers/media/common/tuners/tuner-xc2028.c
index f270e60..be51c29 100644
--- a/drivers/media/common/tuners/tuner-xc2028.c
+++ b/drivers/media/common/tuners/tuner-xc2028.c
@@ -917,30 +917,68 @@
* that xc2028 will be in a safe state.
* Maybe this might also be needed for DTV.
*/
- if (new_mode == T_ANALOG_TV)
+ if (new_mode == T_ANALOG_TV) {
rc = send_seq(priv, {0x00, 0x00});
- /*
- * Digital modes require an offset to adjust to the
- * proper frequency.
- * Analog modes require offset = 0
- */
- if (new_mode == T_DIGITAL_TV) {
- /* Sets the offset according with firmware */
+ /* Analog modes require offset = 0 */
+ } else {
+ /*
+ * Digital modes require an offset to adjust to the
+ * proper frequency. The offset depends on what
+ * firmware version is used.
+ */
+
+ /*
+ * Adjust to the center frequency. This is calculated by the
+ * formula: offset = 1.25MHz - BW/2
+ * For DTV 7/8, the firmware uses BW = 8000, so it needs a
+ * further adjustment to get the frequency center on VHF
+ */
if (priv->cur_fw.type & DTV6)
offset = 1750000;
else if (priv->cur_fw.type & DTV7)
offset = 2250000;
else /* DTV8 or DTV78 */
offset = 2750000;
-
- /*
- * We must adjust the offset by 500kHz when
- * tuning a 7MHz VHF channel with DTV78 firmware
- * (used in Australia, Italy and Germany)
- */
if ((priv->cur_fw.type & DTV78) && freq < 470000000)
offset -= 500000;
+
+ /*
+ * xc3028 additional "magic"
+ * Depending on the firmware version, it needs some adjustments
+ * to properly centralize the frequency. This seems to be
+ * needed to compensate the SCODE table adjustments made by
+ * newer firmwares
+ */
+
+#if 1
+ /*
+ * The proper adjustment would be to do it at s-code table.
+ * However, this didn't work, as reported by
+ * Robert Lowery <rglowery@exemail.com.au>
+ */
+
+ if (priv->cur_fw.type & DTV7)
+ offset += 500000;
+
+#else
+ /*
+ * Still need tests for XC3028L (firmware 3.2 or upper)
+ * So, for now, let's just comment the per-firmware
+ * version of this change. Reports with xc3028l working
+ * with and without the lines bellow are welcome
+ */
+
+ if (priv->firm_version < 0x0302) {
+ if (priv->cur_fw.type & DTV7)
+ offset += 500000;
+ } else {
+ if (priv->cur_fw.type & DTV7)
+ offset -= 300000;
+ else if (type != ATSC) /* DVB @6MHz, DTV 8 and DTV 7/8 */
+ offset += 200000;
+ }
+#endif
}
div = (freq - offset + DIV / 2) / DIV;
@@ -1097,17 +1135,24 @@
/* All S-code tables need a 200kHz shift */
if (priv->ctrl.demod) {
- demod = priv->ctrl.demod + 200;
+ demod = priv->ctrl.demod;
+
+ /*
+ * Newer firmwares require a 200 kHz offset only for ATSC
+ */
+ if (type == ATSC || priv->firm_version < 0x0302)
+ demod += 200;
/*
* The DTV7 S-code table needs a 700 kHz shift.
- * Thanks to Terry Wu <terrywu2009@gmail.com> for reporting this
*
* DTV7 is only used in Australia. Germany or Italy may also
* use this firmware after initialization, but a tune to a UHF
* channel should then cause DTV78 to be used.
+ *
+ * Unfortunately, on real-field tests, the s-code offset
+ * didn't work as expected, as reported by
+ * Robert Lowery <rglowery@exemail.com.au>
*/
- if (type & DTV7)
- demod += 500;
}
return generic_set_freq(fe, p->frequency,
diff --git a/drivers/media/dvb/Kconfig b/drivers/media/dvb/Kconfig
index cf8f65f..161ccfd 100644
--- a/drivers/media/dvb/Kconfig
+++ b/drivers/media/dvb/Kconfig
@@ -76,6 +76,10 @@
depends on DVB_CORE && PCI && I2C
source "drivers/media/dvb/mantis/Kconfig"
+comment "Supported nGene Adapters"
+ depends on DVB_CORE && PCI && I2C
+ source "drivers/media/dvb/ngene/Kconfig"
+
comment "Supported DVB Frontends"
depends on DVB_CORE
source "drivers/media/dvb/frontends/Kconfig"
diff --git a/drivers/media/dvb/Makefile b/drivers/media/dvb/Makefile
index c12922c..a1a0875 100644
--- a/drivers/media/dvb/Makefile
+++ b/drivers/media/dvb/Makefile
@@ -14,6 +14,7 @@
siano/ \
dm1105/ \
pt1/ \
- mantis/
+ mantis/ \
+ ngene/
obj-$(CONFIG_DVB_FIREDTV) += firewire/
diff --git a/drivers/media/dvb/bt8xx/bt878.c b/drivers/media/dvb/bt8xx/bt878.c
index a24c125..99d6209 100644
--- a/drivers/media/dvb/bt8xx/bt878.c
+++ b/drivers/media/dvb/bt8xx/bt878.c
@@ -576,43 +576,30 @@
.remove = __devexit_p(bt878_remove),
};
-static int bt878_pci_driver_registered;
-
/*******************************/
/* Module management functions */
/*******************************/
-static int bt878_init_module(void)
+static int __init bt878_init_module(void)
{
bt878_num = 0;
- bt878_pci_driver_registered = 0;
printk(KERN_INFO "bt878: AUDIO driver version %d.%d.%d loaded\n",
(BT878_VERSION_CODE >> 16) & 0xff,
(BT878_VERSION_CODE >> 8) & 0xff,
BT878_VERSION_CODE & 0xff);
-/*
- bt878_check_chipset();
-*/
- /* later we register inside of bt878_find_audio_dma()
- * because we may want to ignore certain cards */
- bt878_pci_driver_registered = 1;
+
return pci_register_driver(&bt878_pci_driver);
}
-static void bt878_cleanup_module(void)
+static void __exit bt878_cleanup_module(void)
{
- if (bt878_pci_driver_registered) {
- bt878_pci_driver_registered = 0;
- pci_unregister_driver(&bt878_pci_driver);
- }
- return;
+ pci_unregister_driver(&bt878_pci_driver);
}
module_init(bt878_init_module);
module_exit(bt878_cleanup_module);
-//MODULE_AUTHOR("XXX");
MODULE_LICENSE("GPL");
/*
diff --git a/drivers/media/dvb/bt8xx/dst.c b/drivers/media/dvb/bt8xx/dst.c
index 91353a6..8b0cde3 100644
--- a/drivers/media/dvb/bt8xx/dst.c
+++ b/drivers/media/dvb/bt8xx/dst.c
@@ -1352,8 +1352,7 @@
return retval;
}
if ((state->type_flags & DST_TYPE_HAS_VLF) &&
- !(state->dst_type == DST_TYPE_IS_CABLE) &&
- !(state->dst_type == DST_TYPE_IS_ATSC)) {
+ !(state->dst_type == DST_TYPE_IS_ATSC)) {
if (state->rx_tuna[9] != dst_check_sum(&state->rx_tuna[0], 9)) {
dprintk(verbose, DST_INFO, 1, "checksum failure ? ");
@@ -1820,8 +1819,13 @@
.frequency_max = 858000000,
.symbol_rate_min = 1000000,
.symbol_rate_max = 45000000,
- /* . symbol_rate_tolerance = ???,*/
- .caps = FE_CAN_FEC_AUTO | FE_CAN_QAM_AUTO
+ .caps = FE_CAN_FEC_AUTO |
+ FE_CAN_QAM_AUTO |
+ FE_CAN_QAM_16 |
+ FE_CAN_QAM_32 |
+ FE_CAN_QAM_64 |
+ FE_CAN_QAM_128 |
+ FE_CAN_QAM_256
},
.release = dst_release,
diff --git a/drivers/media/dvb/dm1105/Kconfig b/drivers/media/dvb/dm1105/Kconfig
index de3eeb0..6952392 100644
--- a/drivers/media/dvb/dm1105/Kconfig
+++ b/drivers/media/dvb/dm1105/Kconfig
@@ -8,6 +8,7 @@
select DVB_STB6000 if !DVB_FE_CUSTOMISE
select DVB_CX24116 if !DVB_FE_CUSTOMISE
select DVB_SI21XX if !DVB_FE_CUSTOMISE
+ select DVB_DS3000 if !DVB_FE_CUSTOMISE
select VIDEO_IR
help
Support for cards based on the SDMC DM1105 PCI chip like
diff --git a/drivers/media/dvb/dm1105/dm1105.c b/drivers/media/dvb/dm1105/dm1105.c
index f0f483a..383cca3 100644
--- a/drivers/media/dvb/dm1105/dm1105.c
+++ b/drivers/media/dvb/dm1105/dm1105.c
@@ -43,6 +43,7 @@
#include "si21xx.h"
#include "cx24116.h"
#include "z0194a.h"
+#include "ds3000.h"
#define UNSET (-1U)
@@ -269,7 +270,7 @@
u32 ir_command;
};
-struct dm1105dvb {
+struct dm1105_dev {
/* pci */
struct pci_dev *pdev;
u8 __iomem *io_mem;
@@ -308,31 +309,47 @@
spinlock_t lock;
};
-#define dm_io_mem(reg) ((unsigned long)(&dm1105dvb->io_mem[reg]))
+#define dm_io_mem(reg) ((unsigned long)(&dev->io_mem[reg]))
+
+#define dm_readb(reg) inb(dm_io_mem(reg))
+#define dm_writeb(reg, value) outb((value), (dm_io_mem(reg)))
+
+#define dm_readw(reg) inw(dm_io_mem(reg))
+#define dm_writew(reg, value) outw((value), (dm_io_mem(reg)))
+
+#define dm_readl(reg) inl(dm_io_mem(reg))
+#define dm_writel(reg, value) outl((value), (dm_io_mem(reg)))
+
+#define dm_andorl(reg, mask, value) \
+ outl((inl(dm_io_mem(reg)) & ~(mask)) |\
+ ((value) & (mask)), (dm_io_mem(reg)))
+
+#define dm_setl(reg, bit) dm_andorl((reg), (bit), (bit))
+#define dm_clearl(reg, bit) dm_andorl((reg), (bit), 0)
static int dm1105_i2c_xfer(struct i2c_adapter *i2c_adap,
struct i2c_msg *msgs, int num)
{
- struct dm1105dvb *dm1105dvb ;
+ struct dm1105_dev *dev ;
int addr, rc, i, j, k, len, byte, data;
u8 status;
- dm1105dvb = i2c_adap->algo_data;
+ dev = i2c_adap->algo_data;
for (i = 0; i < num; i++) {
- outb(0x00, dm_io_mem(DM1105_I2CCTR));
+ dm_writeb(DM1105_I2CCTR, 0x00);
if (msgs[i].flags & I2C_M_RD) {
/* read bytes */
addr = msgs[i].addr << 1;
addr |= 1;
- outb(addr, dm_io_mem(DM1105_I2CDAT));
+ dm_writeb(DM1105_I2CDAT, addr);
for (byte = 0; byte < msgs[i].len; byte++)
- outb(0, dm_io_mem(DM1105_I2CDAT + byte + 1));
+ dm_writeb(DM1105_I2CDAT + byte + 1, 0);
- outb(0x81 + msgs[i].len, dm_io_mem(DM1105_I2CCTR));
+ dm_writeb(DM1105_I2CCTR, 0x81 + msgs[i].len);
for (j = 0; j < 55; j++) {
mdelay(10);
- status = inb(dm_io_mem(DM1105_I2CSTS));
+ status = dm_readb(DM1105_I2CSTS);
if ((status & 0xc0) == 0x40)
break;
}
@@ -340,56 +357,54 @@
return -1;
for (byte = 0; byte < msgs[i].len; byte++) {
- rc = inb(dm_io_mem(DM1105_I2CDAT + byte + 1));
+ rc = dm_readb(DM1105_I2CDAT + byte + 1);
if (rc < 0)
goto err;
msgs[i].buf[byte] = rc;
}
- } else {
- if ((msgs[i].buf[0] == 0xf7) && (msgs[i].addr == 0x55)) {
- /* prepaired for cx24116 firmware */
- /* Write in small blocks */
- len = msgs[i].len - 1;
- k = 1;
- do {
- outb(msgs[i].addr << 1, dm_io_mem(DM1105_I2CDAT));
- outb(0xf7, dm_io_mem(DM1105_I2CDAT + 1));
- for (byte = 0; byte < (len > 48 ? 48 : len); byte++) {
- data = msgs[i].buf[k+byte];
- outb(data, dm_io_mem(DM1105_I2CDAT + byte + 2));
- }
- outb(0x82 + (len > 48 ? 48 : len), dm_io_mem(DM1105_I2CCTR));
- for (j = 0; j < 25; j++) {
- mdelay(10);
- status = inb(dm_io_mem(DM1105_I2CSTS));
- if ((status & 0xc0) == 0x40)
- break;
- }
-
- if (j >= 25)
- return -1;
-
- k += 48;
- len -= 48;
- } while (len > 0);
- } else {
- /* write bytes */
- outb(msgs[i].addr<<1, dm_io_mem(DM1105_I2CDAT));
- for (byte = 0; byte < msgs[i].len; byte++) {
- data = msgs[i].buf[byte];
- outb(data, dm_io_mem(DM1105_I2CDAT + byte + 1));
+ } else if ((msgs[i].buf[0] == 0xf7) && (msgs[i].addr == 0x55)) {
+ /* prepaired for cx24116 firmware */
+ /* Write in small blocks */
+ len = msgs[i].len - 1;
+ k = 1;
+ do {
+ dm_writeb(DM1105_I2CDAT, msgs[i].addr << 1);
+ dm_writeb(DM1105_I2CDAT + 1, 0xf7);
+ for (byte = 0; byte < (len > 48 ? 48 : len); byte++) {
+ data = msgs[i].buf[k + byte];
+ dm_writeb(DM1105_I2CDAT + byte + 2, data);
}
- outb(0x81 + msgs[i].len, dm_io_mem(DM1105_I2CCTR));
+ dm_writeb(DM1105_I2CCTR, 0x82 + (len > 48 ? 48 : len));
for (j = 0; j < 25; j++) {
mdelay(10);
- status = inb(dm_io_mem(DM1105_I2CSTS));
+ status = dm_readb(DM1105_I2CSTS);
if ((status & 0xc0) == 0x40)
break;
}
if (j >= 25)
return -1;
+
+ k += 48;
+ len -= 48;
+ } while (len > 0);
+ } else {
+ /* write bytes */
+ dm_writeb(DM1105_I2CDAT, msgs[i].addr << 1);
+ for (byte = 0; byte < msgs[i].len; byte++) {
+ data = msgs[i].buf[byte];
+ dm_writeb(DM1105_I2CDAT + byte + 1, data);
}
+ dm_writeb(DM1105_I2CCTR, 0x81 + msgs[i].len);
+ for (j = 0; j < 25; j++) {
+ mdelay(10);
+ status = dm_readb(DM1105_I2CSTS);
+ if ((status & 0xc0) == 0x40)
+ break;
+ }
+
+ if (j >= 25)
+ return -1;
}
}
return num;
@@ -407,22 +422,22 @@
.functionality = functionality,
};
-static inline struct dm1105dvb *feed_to_dm1105dvb(struct dvb_demux_feed *feed)
+static inline struct dm1105_dev *feed_to_dm1105_dev(struct dvb_demux_feed *feed)
{
- return container_of(feed->demux, struct dm1105dvb, demux);
+ return container_of(feed->demux, struct dm1105_dev, demux);
}
-static inline struct dm1105dvb *frontend_to_dm1105dvb(struct dvb_frontend *fe)
+static inline struct dm1105_dev *frontend_to_dm1105_dev(struct dvb_frontend *fe)
{
- return container_of(fe->dvb, struct dm1105dvb, dvb_adapter);
+ return container_of(fe->dvb, struct dm1105_dev, dvb_adapter);
}
-static int dm1105dvb_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
+static int dm1105_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
{
- struct dm1105dvb *dm1105dvb = frontend_to_dm1105dvb(fe);
+ struct dm1105_dev *dev = frontend_to_dm1105_dev(fe);
u32 lnb_mask, lnb_13v, lnb_18v, lnb_off;
- switch (dm1105dvb->boardnr) {
+ switch (dev->boardnr) {
case DM1105_BOARD_AXESS_DM05:
lnb_mask = DM05_LNB_MASK;
lnb_off = DM05_LNB_OFF;
@@ -438,62 +453,67 @@
lnb_18v = DM1105_LNB_18V;
}
- outl(lnb_mask, dm_io_mem(DM1105_GPIOCTR));
+ dm_writel(DM1105_GPIOCTR, lnb_mask);
if (voltage == SEC_VOLTAGE_18)
- outl(lnb_18v , dm_io_mem(DM1105_GPIOVAL));
+ dm_writel(DM1105_GPIOVAL, lnb_18v);
else if (voltage == SEC_VOLTAGE_13)
- outl(lnb_13v, dm_io_mem(DM1105_GPIOVAL));
+ dm_writel(DM1105_GPIOVAL, lnb_13v);
else
- outl(lnb_off, dm_io_mem(DM1105_GPIOVAL));
+ dm_writel(DM1105_GPIOVAL, lnb_off);
return 0;
}
-static void dm1105dvb_set_dma_addr(struct dm1105dvb *dm1105dvb)
+static void dm1105_set_dma_addr(struct dm1105_dev *dev)
{
- outl(cpu_to_le32(dm1105dvb->dma_addr), dm_io_mem(DM1105_STADR));
+ dm_writel(DM1105_STADR, cpu_to_le32(dev->dma_addr));
}
-static int __devinit dm1105dvb_dma_map(struct dm1105dvb *dm1105dvb)
+static int __devinit dm1105_dma_map(struct dm1105_dev *dev)
{
- dm1105dvb->ts_buf = pci_alloc_consistent(dm1105dvb->pdev, 6*DM1105_DMA_BYTES, &dm1105dvb->dma_addr);
+ dev->ts_buf = pci_alloc_consistent(dev->pdev,
+ 6 * DM1105_DMA_BYTES,
+ &dev->dma_addr);
- return !dm1105dvb->ts_buf;
+ return !dev->ts_buf;
}
-static void dm1105dvb_dma_unmap(struct dm1105dvb *dm1105dvb)
+static void dm1105_dma_unmap(struct dm1105_dev *dev)
{
- pci_free_consistent(dm1105dvb->pdev, 6*DM1105_DMA_BYTES, dm1105dvb->ts_buf, dm1105dvb->dma_addr);
+ pci_free_consistent(dev->pdev,
+ 6 * DM1105_DMA_BYTES,
+ dev->ts_buf,
+ dev->dma_addr);
}
-static void dm1105dvb_enable_irqs(struct dm1105dvb *dm1105dvb)
+static void dm1105_enable_irqs(struct dm1105_dev *dev)
{
- outb(INTMAK_ALLMASK, dm_io_mem(DM1105_INTMAK));
- outb(1, dm_io_mem(DM1105_CR));
+ dm_writeb(DM1105_INTMAK, INTMAK_ALLMASK);
+ dm_writeb(DM1105_CR, 1);
}
-static void dm1105dvb_disable_irqs(struct dm1105dvb *dm1105dvb)
+static void dm1105_disable_irqs(struct dm1105_dev *dev)
{
- outb(INTMAK_IRM, dm_io_mem(DM1105_INTMAK));
- outb(0, dm_io_mem(DM1105_CR));
+ dm_writeb(DM1105_INTMAK, INTMAK_IRM);
+ dm_writeb(DM1105_CR, 0);
}
-static int dm1105dvb_start_feed(struct dvb_demux_feed *f)
+static int dm1105_start_feed(struct dvb_demux_feed *f)
{
- struct dm1105dvb *dm1105dvb = feed_to_dm1105dvb(f);
+ struct dm1105_dev *dev = feed_to_dm1105_dev(f);
- if (dm1105dvb->full_ts_users++ == 0)
- dm1105dvb_enable_irqs(dm1105dvb);
+ if (dev->full_ts_users++ == 0)
+ dm1105_enable_irqs(dev);
return 0;
}
-static int dm1105dvb_stop_feed(struct dvb_demux_feed *f)
+static int dm1105_stop_feed(struct dvb_demux_feed *f)
{
- struct dm1105dvb *dm1105dvb = feed_to_dm1105dvb(f);
+ struct dm1105_dev *dev = feed_to_dm1105_dev(f);
- if (--dm1105dvb->full_ts_users == 0)
- dm1105dvb_disable_irqs(dm1105dvb);
+ if (--dev->full_ts_users == 0)
+ dm1105_disable_irqs(dev);
return 0;
}
@@ -517,68 +537,64 @@
/* work handler */
static void dm1105_dmx_buffer(struct work_struct *work)
{
- struct dm1105dvb *dm1105dvb =
- container_of(work, struct dm1105dvb, work);
+ struct dm1105_dev *dev = container_of(work, struct dm1105_dev, work);
unsigned int nbpackets;
- u32 oldwrp = dm1105dvb->wrp;
- u32 nextwrp = dm1105dvb->nextwrp;
+ u32 oldwrp = dev->wrp;
+ u32 nextwrp = dev->nextwrp;
- if (!((dm1105dvb->ts_buf[oldwrp] == 0x47) &&
- (dm1105dvb->ts_buf[oldwrp + 188] == 0x47) &&
- (dm1105dvb->ts_buf[oldwrp + 188 * 2] == 0x47))) {
- dm1105dvb->PacketErrorCount++;
+ if (!((dev->ts_buf[oldwrp] == 0x47) &&
+ (dev->ts_buf[oldwrp + 188] == 0x47) &&
+ (dev->ts_buf[oldwrp + 188 * 2] == 0x47))) {
+ dev->PacketErrorCount++;
/* bad packet found */
- if ((dm1105dvb->PacketErrorCount >= 2) &&
- (dm1105dvb->dmarst == 0)) {
- outb(1, dm_io_mem(DM1105_RST));
- dm1105dvb->wrp = 0;
- dm1105dvb->PacketErrorCount = 0;
- dm1105dvb->dmarst = 0;
+ if ((dev->PacketErrorCount >= 2) &&
+ (dev->dmarst == 0)) {
+ dm_writeb(DM1105_RST, 1);
+ dev->wrp = 0;
+ dev->PacketErrorCount = 0;
+ dev->dmarst = 0;
return;
}
}
if (nextwrp < oldwrp) {
- memcpy(dm1105dvb->ts_buf + dm1105dvb->buffer_size,
- dm1105dvb->ts_buf, nextwrp);
- nbpackets = ((dm1105dvb->buffer_size - oldwrp) + nextwrp) / 188;
+ memcpy(dev->ts_buf + dev->buffer_size, dev->ts_buf, nextwrp);
+ nbpackets = ((dev->buffer_size - oldwrp) + nextwrp) / 188;
} else
nbpackets = (nextwrp - oldwrp) / 188;
- dm1105dvb->wrp = nextwrp;
- dvb_dmx_swfilter_packets(&dm1105dvb->demux,
- &dm1105dvb->ts_buf[oldwrp], nbpackets);
+ dev->wrp = nextwrp;
+ dvb_dmx_swfilter_packets(&dev->demux, &dev->ts_buf[oldwrp], nbpackets);
}
-static irqreturn_t dm1105dvb_irq(int irq, void *dev_id)
+static irqreturn_t dm1105_irq(int irq, void *dev_id)
{
- struct dm1105dvb *dm1105dvb = dev_id;
+ struct dm1105_dev *dev = dev_id;
/* Read-Write INSTS Ack's Interrupt for DM1105 chip 16.03.2008 */
- unsigned int intsts = inb(dm_io_mem(DM1105_INTSTS));
- outb(intsts, dm_io_mem(DM1105_INTSTS));
+ unsigned int intsts = dm_readb(DM1105_INTSTS);
+ dm_writeb(DM1105_INTSTS, intsts);
switch (intsts) {
case INTSTS_TSIRQ:
case (INTSTS_TSIRQ | INTSTS_IR):
- dm1105dvb->nextwrp = inl(dm_io_mem(DM1105_WRP)) -
- inl(dm_io_mem(DM1105_STADR));
- queue_work(dm1105dvb->wq, &dm1105dvb->work);
+ dev->nextwrp = dm_readl(DM1105_WRP) - dm_readl(DM1105_STADR);
+ queue_work(dev->wq, &dev->work);
break;
case INTSTS_IR:
- dm1105dvb->ir.ir_command = inl(dm_io_mem(DM1105_IRCODE));
- schedule_work(&dm1105dvb->ir.work);
+ dev->ir.ir_command = dm_readl(DM1105_IRCODE);
+ schedule_work(&dev->ir.work);
break;
}
return IRQ_HANDLED;
}
-int __devinit dm1105_ir_init(struct dm1105dvb *dm1105)
+int __devinit dm1105_ir_init(struct dm1105_dev *dm1105)
{
struct input_dev *input_dev;
struct ir_scancode_table *ir_codes = &ir_codes_dm1105_nec_table;
- int ir_type = IR_TYPE_OTHER;
+ u64 ir_type = IR_TYPE_OTHER;
int err = -ENOMEM;
input_dev = input_allocate_device();
@@ -611,51 +627,51 @@
INIT_WORK(&dm1105->ir.work, dm1105_emit_key);
- err = ir_input_register(input_dev, ir_codes);
+ err = ir_input_register(input_dev, ir_codes, NULL);
return err;
}
-void __devexit dm1105_ir_exit(struct dm1105dvb *dm1105)
+void __devexit dm1105_ir_exit(struct dm1105_dev *dm1105)
{
ir_input_unregister(dm1105->ir.input_dev);
}
-static int __devinit dm1105dvb_hw_init(struct dm1105dvb *dm1105dvb)
+static int __devinit dm1105_hw_init(struct dm1105_dev *dev)
{
- dm1105dvb_disable_irqs(dm1105dvb);
+ dm1105_disable_irqs(dev);
- outb(0, dm_io_mem(DM1105_HOST_CTR));
+ dm_writeb(DM1105_HOST_CTR, 0);
/*DATALEN 188,*/
- outb(188, dm_io_mem(DM1105_DTALENTH));
+ dm_writeb(DM1105_DTALENTH, 188);
/*TS_STRT TS_VALP MSBFIRST TS_MODE ALPAS TSPES*/
- outw(0xc10a, dm_io_mem(DM1105_TSCTR));
+ dm_writew(DM1105_TSCTR, 0xc10a);
/* map DMA and set address */
- dm1105dvb_dma_map(dm1105dvb);
- dm1105dvb_set_dma_addr(dm1105dvb);
+ dm1105_dma_map(dev);
+ dm1105_set_dma_addr(dev);
/* big buffer */
- outl(5*DM1105_DMA_BYTES, dm_io_mem(DM1105_RLEN));
- outb(47, dm_io_mem(DM1105_INTCNT));
+ dm_writel(DM1105_RLEN, 5 * DM1105_DMA_BYTES);
+ dm_writeb(DM1105_INTCNT, 47);
/* IR NEC mode enable */
- outb((DM1105_IR_EN | DM1105_SYS_CHK), dm_io_mem(DM1105_IRCTR));
- outb(0, dm_io_mem(DM1105_IRMODE));
- outw(0, dm_io_mem(DM1105_SYSTEMCODE));
+ dm_writeb(DM1105_IRCTR, (DM1105_IR_EN | DM1105_SYS_CHK));
+ dm_writeb(DM1105_IRMODE, 0);
+ dm_writew(DM1105_SYSTEMCODE, 0);
return 0;
}
-static void dm1105dvb_hw_exit(struct dm1105dvb *dm1105dvb)
+static void dm1105_hw_exit(struct dm1105_dev *dev)
{
- dm1105dvb_disable_irqs(dm1105dvb);
+ dm1105_disable_irqs(dev);
/* IR disable */
- outb(0, dm_io_mem(DM1105_IRCTR));
- outb(INTMAK_NONEMASK, dm_io_mem(DM1105_INTMAK));
+ dm_writeb(DM1105_IRCTR, 0);
+ dm_writeb(DM1105_INTMAK, INTMAK_NONEMASK);
- dm1105dvb_dma_unmap(dm1105dvb);
+ dm1105_dma_unmap(dev);
}
static struct stv0299_config sharp_z0194a_config = {
@@ -685,70 +701,79 @@
.demod_address = 0x55,
};
-static int __devinit frontend_init(struct dm1105dvb *dm1105dvb)
+static struct ds3000_config dvbworld_ds3000_config = {
+ .demod_address = 0x68,
+};
+
+static int __devinit frontend_init(struct dm1105_dev *dev)
{
int ret;
- switch (dm1105dvb->boardnr) {
+ switch (dev->boardnr) {
case DM1105_BOARD_DVBWORLD_2004:
- dm1105dvb->fe = dvb_attach(
+ dev->fe = dvb_attach(
cx24116_attach, &serit_sp2633_config,
- &dm1105dvb->i2c_adap);
- if (dm1105dvb->fe)
- dm1105dvb->fe->ops.set_voltage = dm1105dvb_set_voltage;
+ &dev->i2c_adap);
+ if (dev->fe) {
+ dev->fe->ops.set_voltage = dm1105_set_voltage;
+ break;
+ }
+
+ dev->fe = dvb_attach(
+ ds3000_attach, &dvbworld_ds3000_config,
+ &dev->i2c_adap);
+ if (dev->fe)
+ dev->fe->ops.set_voltage = dm1105_set_voltage;
break;
case DM1105_BOARD_DVBWORLD_2002:
case DM1105_BOARD_AXESS_DM05:
default:
- dm1105dvb->fe = dvb_attach(
+ dev->fe = dvb_attach(
stv0299_attach, &sharp_z0194a_config,
- &dm1105dvb->i2c_adap);
- if (dm1105dvb->fe) {
- dm1105dvb->fe->ops.set_voltage =
- dm1105dvb_set_voltage;
- dvb_attach(dvb_pll_attach, dm1105dvb->fe, 0x60,
- &dm1105dvb->i2c_adap, DVB_PLL_OPERA1);
+ &dev->i2c_adap);
+ if (dev->fe) {
+ dev->fe->ops.set_voltage = dm1105_set_voltage;
+ dvb_attach(dvb_pll_attach, dev->fe, 0x60,
+ &dev->i2c_adap, DVB_PLL_OPERA1);
break;
}
- dm1105dvb->fe = dvb_attach(
+ dev->fe = dvb_attach(
stv0288_attach, &earda_config,
- &dm1105dvb->i2c_adap);
- if (dm1105dvb->fe) {
- dm1105dvb->fe->ops.set_voltage =
- dm1105dvb_set_voltage;
- dvb_attach(stb6000_attach, dm1105dvb->fe, 0x61,
- &dm1105dvb->i2c_adap);
+ &dev->i2c_adap);
+ if (dev->fe) {
+ dev->fe->ops.set_voltage = dm1105_set_voltage;
+ dvb_attach(stb6000_attach, dev->fe, 0x61,
+ &dev->i2c_adap);
break;
}
- dm1105dvb->fe = dvb_attach(
+ dev->fe = dvb_attach(
si21xx_attach, &serit_config,
- &dm1105dvb->i2c_adap);
- if (dm1105dvb->fe)
- dm1105dvb->fe->ops.set_voltage =
- dm1105dvb_set_voltage;
+ &dev->i2c_adap);
+ if (dev->fe)
+ dev->fe->ops.set_voltage = dm1105_set_voltage;
}
- if (!dm1105dvb->fe) {
- dev_err(&dm1105dvb->pdev->dev, "could not attach frontend\n");
+ if (!dev->fe) {
+ dev_err(&dev->pdev->dev, "could not attach frontend\n");
return -ENODEV;
}
- ret = dvb_register_frontend(&dm1105dvb->dvb_adapter, dm1105dvb->fe);
+ ret = dvb_register_frontend(&dev->dvb_adapter, dev->fe);
if (ret < 0) {
- if (dm1105dvb->fe->ops.release)
- dm1105dvb->fe->ops.release(dm1105dvb->fe);
- dm1105dvb->fe = NULL;
+ if (dev->fe->ops.release)
+ dev->fe->ops.release(dev->fe);
+ dev->fe = NULL;
return ret;
}
return 0;
}
-static void __devinit dm1105dvb_read_mac(struct dm1105dvb *dm1105dvb, u8 *mac)
+static void __devinit dm1105_read_mac(struct dm1105_dev *dev, u8 *mac)
{
static u8 command[1] = { 0x28 };
@@ -766,47 +791,47 @@
},
};
- dm1105_i2c_xfer(&dm1105dvb->i2c_adap, msg , 2);
- dev_info(&dm1105dvb->pdev->dev, "MAC %pM\n", mac);
+ dm1105_i2c_xfer(&dev->i2c_adap, msg , 2);
+ dev_info(&dev->pdev->dev, "MAC %pM\n", mac);
}
static int __devinit dm1105_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
- struct dm1105dvb *dm1105dvb;
+ struct dm1105_dev *dev;
struct dvb_adapter *dvb_adapter;
struct dvb_demux *dvbdemux;
struct dmx_demux *dmx;
int ret = -ENOMEM;
int i;
- dm1105dvb = kzalloc(sizeof(struct dm1105dvb), GFP_KERNEL);
- if (!dm1105dvb)
+ dev = kzalloc(sizeof(struct dm1105_dev), GFP_KERNEL);
+ if (!dev)
return -ENOMEM;
/* board config */
- dm1105dvb->nr = dm1105_devcount;
- dm1105dvb->boardnr = UNSET;
- if (card[dm1105dvb->nr] < ARRAY_SIZE(dm1105_boards))
- dm1105dvb->boardnr = card[dm1105dvb->nr];
- for (i = 0; UNSET == dm1105dvb->boardnr &&
+ dev->nr = dm1105_devcount;
+ dev->boardnr = UNSET;
+ if (card[dev->nr] < ARRAY_SIZE(dm1105_boards))
+ dev->boardnr = card[dev->nr];
+ for (i = 0; UNSET == dev->boardnr &&
i < ARRAY_SIZE(dm1105_subids); i++)
if (pdev->subsystem_vendor ==
dm1105_subids[i].subvendor &&
pdev->subsystem_device ==
dm1105_subids[i].subdevice)
- dm1105dvb->boardnr = dm1105_subids[i].card;
+ dev->boardnr = dm1105_subids[i].card;
- if (UNSET == dm1105dvb->boardnr) {
- dm1105dvb->boardnr = DM1105_BOARD_UNKNOWN;
+ if (UNSET == dev->boardnr) {
+ dev->boardnr = DM1105_BOARD_UNKNOWN;
dm1105_card_list(pdev);
}
dm1105_devcount++;
- dm1105dvb->pdev = pdev;
- dm1105dvb->buffer_size = 5 * DM1105_DMA_BYTES;
- dm1105dvb->PacketErrorCount = 0;
- dm1105dvb->dmarst = 0;
+ dev->pdev = pdev;
+ dev->buffer_size = 5 * DM1105_DMA_BYTES;
+ dev->PacketErrorCount = 0;
+ dev->dmarst = 0;
ret = pci_enable_device(pdev);
if (ret < 0)
@@ -822,47 +847,47 @@
if (ret < 0)
goto err_pci_disable_device;
- dm1105dvb->io_mem = pci_iomap(pdev, 0, pci_resource_len(pdev, 0));
- if (!dm1105dvb->io_mem) {
+ dev->io_mem = pci_iomap(pdev, 0, pci_resource_len(pdev, 0));
+ if (!dev->io_mem) {
ret = -EIO;
goto err_pci_release_regions;
}
- spin_lock_init(&dm1105dvb->lock);
- pci_set_drvdata(pdev, dm1105dvb);
+ spin_lock_init(&dev->lock);
+ pci_set_drvdata(pdev, dev);
- ret = dm1105dvb_hw_init(dm1105dvb);
+ ret = dm1105_hw_init(dev);
if (ret < 0)
goto err_pci_iounmap;
/* i2c */
- i2c_set_adapdata(&dm1105dvb->i2c_adap, dm1105dvb);
- strcpy(dm1105dvb->i2c_adap.name, DRIVER_NAME);
- dm1105dvb->i2c_adap.owner = THIS_MODULE;
- dm1105dvb->i2c_adap.class = I2C_CLASS_TV_DIGITAL;
- dm1105dvb->i2c_adap.dev.parent = &pdev->dev;
- dm1105dvb->i2c_adap.algo = &dm1105_algo;
- dm1105dvb->i2c_adap.algo_data = dm1105dvb;
- ret = i2c_add_adapter(&dm1105dvb->i2c_adap);
+ i2c_set_adapdata(&dev->i2c_adap, dev);
+ strcpy(dev->i2c_adap.name, DRIVER_NAME);
+ dev->i2c_adap.owner = THIS_MODULE;
+ dev->i2c_adap.class = I2C_CLASS_TV_DIGITAL;
+ dev->i2c_adap.dev.parent = &pdev->dev;
+ dev->i2c_adap.algo = &dm1105_algo;
+ dev->i2c_adap.algo_data = dev;
+ ret = i2c_add_adapter(&dev->i2c_adap);
if (ret < 0)
- goto err_dm1105dvb_hw_exit;
+ goto err_dm1105_hw_exit;
/* dvb */
- ret = dvb_register_adapter(&dm1105dvb->dvb_adapter, DRIVER_NAME,
+ ret = dvb_register_adapter(&dev->dvb_adapter, DRIVER_NAME,
THIS_MODULE, &pdev->dev, adapter_nr);
if (ret < 0)
goto err_i2c_del_adapter;
- dvb_adapter = &dm1105dvb->dvb_adapter;
+ dvb_adapter = &dev->dvb_adapter;
- dm1105dvb_read_mac(dm1105dvb, dvb_adapter->proposed_mac);
+ dm1105_read_mac(dev, dvb_adapter->proposed_mac);
- dvbdemux = &dm1105dvb->demux;
+ dvbdemux = &dev->demux;
dvbdemux->filternum = 256;
dvbdemux->feednum = 256;
- dvbdemux->start_feed = dm1105dvb_start_feed;
- dvbdemux->stop_feed = dm1105dvb_stop_feed;
+ dvbdemux->start_feed = dm1105_start_feed;
+ dvbdemux->stop_feed = dm1105_stop_feed;
dvbdemux->dmx.capabilities = (DMX_TS_FILTERING |
DMX_SECTION_FILTERING | DMX_MEMORY_BASED_FILTERING);
ret = dvb_dmx_init(dvbdemux);
@@ -870,113 +895,113 @@
goto err_dvb_unregister_adapter;
dmx = &dvbdemux->dmx;
- dm1105dvb->dmxdev.filternum = 256;
- dm1105dvb->dmxdev.demux = dmx;
- dm1105dvb->dmxdev.capabilities = 0;
+ dev->dmxdev.filternum = 256;
+ dev->dmxdev.demux = dmx;
+ dev->dmxdev.capabilities = 0;
- ret = dvb_dmxdev_init(&dm1105dvb->dmxdev, dvb_adapter);
+ ret = dvb_dmxdev_init(&dev->dmxdev, dvb_adapter);
if (ret < 0)
goto err_dvb_dmx_release;
- dm1105dvb->hw_frontend.source = DMX_FRONTEND_0;
+ dev->hw_frontend.source = DMX_FRONTEND_0;
- ret = dmx->add_frontend(dmx, &dm1105dvb->hw_frontend);
+ ret = dmx->add_frontend(dmx, &dev->hw_frontend);
if (ret < 0)
goto err_dvb_dmxdev_release;
- dm1105dvb->mem_frontend.source = DMX_MEMORY_FE;
+ dev->mem_frontend.source = DMX_MEMORY_FE;
- ret = dmx->add_frontend(dmx, &dm1105dvb->mem_frontend);
+ ret = dmx->add_frontend(dmx, &dev->mem_frontend);
if (ret < 0)
goto err_remove_hw_frontend;
- ret = dmx->connect_frontend(dmx, &dm1105dvb->hw_frontend);
+ ret = dmx->connect_frontend(dmx, &dev->hw_frontend);
if (ret < 0)
goto err_remove_mem_frontend;
- ret = frontend_init(dm1105dvb);
+ ret = frontend_init(dev);
if (ret < 0)
goto err_disconnect_frontend;
- dvb_net_init(dvb_adapter, &dm1105dvb->dvbnet, dmx);
- dm1105_ir_init(dm1105dvb);
+ dvb_net_init(dvb_adapter, &dev->dvbnet, dmx);
+ dm1105_ir_init(dev);
- INIT_WORK(&dm1105dvb->work, dm1105_dmx_buffer);
- sprintf(dm1105dvb->wqn, "%s/%d", dvb_adapter->name, dvb_adapter->num);
- dm1105dvb->wq = create_singlethread_workqueue(dm1105dvb->wqn);
- if (!dm1105dvb->wq)
+ INIT_WORK(&dev->work, dm1105_dmx_buffer);
+ sprintf(dev->wqn, "%s/%d", dvb_adapter->name, dvb_adapter->num);
+ dev->wq = create_singlethread_workqueue(dev->wqn);
+ if (!dev->wq)
goto err_dvb_net;
- ret = request_irq(pdev->irq, dm1105dvb_irq, IRQF_SHARED,
- DRIVER_NAME, dm1105dvb);
+ ret = request_irq(pdev->irq, dm1105_irq, IRQF_SHARED,
+ DRIVER_NAME, dev);
if (ret < 0)
goto err_workqueue;
return 0;
err_workqueue:
- destroy_workqueue(dm1105dvb->wq);
+ destroy_workqueue(dev->wq);
err_dvb_net:
- dvb_net_release(&dm1105dvb->dvbnet);
+ dvb_net_release(&dev->dvbnet);
err_disconnect_frontend:
dmx->disconnect_frontend(dmx);
err_remove_mem_frontend:
- dmx->remove_frontend(dmx, &dm1105dvb->mem_frontend);
+ dmx->remove_frontend(dmx, &dev->mem_frontend);
err_remove_hw_frontend:
- dmx->remove_frontend(dmx, &dm1105dvb->hw_frontend);
+ dmx->remove_frontend(dmx, &dev->hw_frontend);
err_dvb_dmxdev_release:
- dvb_dmxdev_release(&dm1105dvb->dmxdev);
+ dvb_dmxdev_release(&dev->dmxdev);
err_dvb_dmx_release:
dvb_dmx_release(dvbdemux);
err_dvb_unregister_adapter:
dvb_unregister_adapter(dvb_adapter);
err_i2c_del_adapter:
- i2c_del_adapter(&dm1105dvb->i2c_adap);
-err_dm1105dvb_hw_exit:
- dm1105dvb_hw_exit(dm1105dvb);
+ i2c_del_adapter(&dev->i2c_adap);
+err_dm1105_hw_exit:
+ dm1105_hw_exit(dev);
err_pci_iounmap:
- pci_iounmap(pdev, dm1105dvb->io_mem);
+ pci_iounmap(pdev, dev->io_mem);
err_pci_release_regions:
pci_release_regions(pdev);
err_pci_disable_device:
pci_disable_device(pdev);
err_kfree:
pci_set_drvdata(pdev, NULL);
- kfree(dm1105dvb);
+ kfree(dev);
return ret;
}
static void __devexit dm1105_remove(struct pci_dev *pdev)
{
- struct dm1105dvb *dm1105dvb = pci_get_drvdata(pdev);
- struct dvb_adapter *dvb_adapter = &dm1105dvb->dvb_adapter;
- struct dvb_demux *dvbdemux = &dm1105dvb->demux;
+ struct dm1105_dev *dev = pci_get_drvdata(pdev);
+ struct dvb_adapter *dvb_adapter = &dev->dvb_adapter;
+ struct dvb_demux *dvbdemux = &dev->demux;
struct dmx_demux *dmx = &dvbdemux->dmx;
- dm1105_ir_exit(dm1105dvb);
+ dm1105_ir_exit(dev);
dmx->close(dmx);
- dvb_net_release(&dm1105dvb->dvbnet);
- if (dm1105dvb->fe)
- dvb_unregister_frontend(dm1105dvb->fe);
+ dvb_net_release(&dev->dvbnet);
+ if (dev->fe)
+ dvb_unregister_frontend(dev->fe);
dmx->disconnect_frontend(dmx);
- dmx->remove_frontend(dmx, &dm1105dvb->mem_frontend);
- dmx->remove_frontend(dmx, &dm1105dvb->hw_frontend);
- dvb_dmxdev_release(&dm1105dvb->dmxdev);
+ dmx->remove_frontend(dmx, &dev->mem_frontend);
+ dmx->remove_frontend(dmx, &dev->hw_frontend);
+ dvb_dmxdev_release(&dev->dmxdev);
dvb_dmx_release(dvbdemux);
dvb_unregister_adapter(dvb_adapter);
- if (&dm1105dvb->i2c_adap)
- i2c_del_adapter(&dm1105dvb->i2c_adap);
+ if (&dev->i2c_adap)
+ i2c_del_adapter(&dev->i2c_adap);
- dm1105dvb_hw_exit(dm1105dvb);
+ dm1105_hw_exit(dev);
synchronize_irq(pdev->irq);
- free_irq(pdev->irq, dm1105dvb);
- pci_iounmap(pdev, dm1105dvb->io_mem);
+ free_irq(pdev->irq, dev);
+ pci_iounmap(pdev, dev->io_mem);
pci_release_regions(pdev);
pci_disable_device(pdev);
pci_set_drvdata(pdev, NULL);
dm1105_devcount--;
- kfree(dm1105dvb);
+ kfree(dev);
}
static struct pci_device_id dm1105_id_table[] __devinitdata = {
diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c
index 0746122..55ea260 100644
--- a/drivers/media/dvb/dvb-core/dvb_frontend.c
+++ b/drivers/media/dvb/dvb-core/dvb_frontend.c
@@ -1199,8 +1199,6 @@
{
int r = 0;
- dtv_property_dump(tvp);
-
/* Allow the frontend to validate incoming properties */
if (fe->ops.get_property)
r = fe->ops.get_property(fe, tvp);
@@ -1323,6 +1321,8 @@
r = -1;
}
+ dtv_property_dump(tvp);
+
return r;
}
@@ -1488,7 +1488,7 @@
struct dvb_frontend_private *fepriv = fe->frontend_priv;
int err = -EOPNOTSUPP;
- dprintk ("%s\n", __func__);
+ dprintk("%s (%d)\n", __func__, _IOC_NR(cmd));
if (fepriv->exit)
return -ENODEV;
@@ -1536,8 +1536,7 @@
if ((tvps->num == 0) || (tvps->num > DTV_IOCTL_MAX_MSGS))
return -EINVAL;
- tvp = (struct dtv_property *) kmalloc(tvps->num *
- sizeof(struct dtv_property), GFP_KERNEL);
+ tvp = kmalloc(tvps->num * sizeof(struct dtv_property), GFP_KERNEL);
if (!tvp) {
err = -ENOMEM;
goto out;
@@ -1569,8 +1568,7 @@
if ((tvps->num == 0) || (tvps->num > DTV_IOCTL_MAX_MSGS))
return -EINVAL;
- tvp = (struct dtv_property *) kmalloc(tvps->num *
- sizeof(struct dtv_property), GFP_KERNEL);
+ tvp = kmalloc(tvps->num * sizeof(struct dtv_property), GFP_KERNEL);
if (!tvp) {
err = -ENOMEM;
goto out;
diff --git a/drivers/media/dvb/dvb-core/dvb_net.c b/drivers/media/dvb/dvb-core/dvb_net.c
index 8b8558f..b11533f 100644
--- a/drivers/media/dvb/dvb-core/dvb_net.c
+++ b/drivers/media/dvb/dvb-core/dvb_net.c
@@ -504,6 +504,7 @@
"bytes left in TS. Resyncing.\n", ts_remain);
priv->ule_sndu_len = 0;
priv->need_pusi = 1;
+ ts += TS_SZ;
continue;
}
diff --git a/drivers/media/dvb/dvb-core/dvb_ringbuffer.c b/drivers/media/dvb/dvb-core/dvb_ringbuffer.c
index 584bbd1..a5712cd 100644
--- a/drivers/media/dvb/dvb-core/dvb_ringbuffer.c
+++ b/drivers/media/dvb/dvb-core/dvb_ringbuffer.c
@@ -89,6 +89,7 @@
rbuf->pread = rbuf->pwrite;
rbuf->error = 0;
}
+EXPORT_SYMBOL(dvb_ringbuffer_flush);
void dvb_ringbuffer_reset(struct dvb_ringbuffer *rbuf)
{
diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig
index 465295b..e5f91f1 100644
--- a/drivers/media/dvb/dvb-usb/Kconfig
+++ b/drivers/media/dvb/dvb-usb/Kconfig
@@ -336,3 +336,11 @@
select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMISE
help
Say Y here to support the E3C EC168 DVB-T USB2.0 receiver.
+
+config DVB_USB_AZ6027
+ tristate "Azurewave DVB-S/S2 USB2.0 AZ6027 support"
+ depends on DVB_USB
+ select DVB_STB0899 if !DVB_FE_CUSTOMISE
+ select DVB_STB6100 if !DVB_FE_CUSTOMISE
+ help
+ Say Y here to support the AZ6027 device
diff --git a/drivers/media/dvb/dvb-usb/Makefile b/drivers/media/dvb/dvb-usb/Makefile
index 72c92cb..1a192453 100644
--- a/drivers/media/dvb/dvb-usb/Makefile
+++ b/drivers/media/dvb/dvb-usb/Makefile
@@ -85,6 +85,9 @@
dvb-usb-ec168-objs = ec168.o
obj-$(CONFIG_DVB_USB_EC168) += dvb-usb-ec168.o
+dvb-usb-az6027-objs = az6027.o
+obj-$(CONFIG_DVB_USB_AZ6027) += dvb-usb-az6027.o
+
EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/
# due to tuner-xc3028
EXTRA_CFLAGS += -Idrivers/media/common/tuners
diff --git a/drivers/media/dvb/dvb-usb/af9015.c b/drivers/media/dvb/dvb-usb/af9015.c
index 8b60a60..d797538 100644
--- a/drivers/media/dvb/dvb-usb/af9015.c
+++ b/drivers/media/dvb/dvb-usb/af9015.c
@@ -21,6 +21,8 @@
*
*/
+#include <linux/hash.h>
+
#include "af9015.h"
#include "af9013.h"
#include "mt2060.h"
@@ -553,26 +555,45 @@
return ret;
}
-/* dump eeprom */
-static int af9015_eeprom_dump(struct dvb_usb_device *d)
+/* hash (and dump) eeprom */
+static int af9015_eeprom_hash(struct usb_device *udev)
{
- u8 reg, val;
+ static const unsigned int eeprom_size = 256;
+ unsigned int reg;
+ int ret;
+ u8 val, *eeprom;
+ struct req_t req = {READ_I2C, AF9015_I2C_EEPROM, 0, 0, 1, 1, &val};
- for (reg = 0; ; reg++) {
- if (reg % 16 == 0) {
- if (reg)
- deb_info(KERN_CONT "\n");
- deb_info(KERN_DEBUG "%02x:", reg);
- }
- if (af9015_read_reg_i2c(d, AF9015_I2C_EEPROM, reg, &val) == 0)
- deb_info(KERN_CONT " %02x", val);
- else
- deb_info(KERN_CONT " --");
- if (reg == 0xff)
- break;
+ eeprom = kmalloc(eeprom_size, GFP_KERNEL);
+ if (eeprom == NULL)
+ return -ENOMEM;
+
+ for (reg = 0; reg < eeprom_size; reg++) {
+ req.addr = reg;
+ ret = af9015_rw_udev(udev, &req);
+ if (ret)
+ goto free;
+ eeprom[reg] = val;
}
- deb_info(KERN_CONT "\n");
- return 0;
+
+ if (dvb_usb_af9015_debug & 0x01)
+ print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, eeprom,
+ eeprom_size);
+
+ BUG_ON(eeprom_size % 4);
+
+ af9015_config.eeprom_sum = 0;
+ for (reg = 0; reg < eeprom_size / sizeof(u32); reg++) {
+ af9015_config.eeprom_sum *= GOLDEN_RATIO_PRIME_32;
+ af9015_config.eeprom_sum += le32_to_cpu(((u32 *)eeprom)[reg]);
+ }
+
+ deb_info("%s: eeprom sum=%.8x\n", __func__, af9015_config.eeprom_sum);
+
+ ret = 0;
+free:
+ kfree(eeprom);
+ return ret;
}
static int af9015_download_ir_table(struct dvb_usb_device *d)
@@ -711,12 +732,132 @@
return ret;
}
+struct af9015_setup {
+ unsigned int id;
+ struct dvb_usb_rc_key *rc_key_map;
+ unsigned int rc_key_map_size;
+ u8 *ir_table;
+ unsigned int ir_table_size;
+};
+
+static const struct af9015_setup *af9015_setup_match(unsigned int id,
+ const struct af9015_setup *table)
+{
+ for (; table->rc_key_map; table++)
+ if (table->id == id)
+ return table;
+ return NULL;
+}
+
+static const struct af9015_setup af9015_setup_modparam[] = {
+ { AF9015_REMOTE_A_LINK_DTU_M,
+ af9015_rc_keys_a_link, ARRAY_SIZE(af9015_rc_keys_a_link),
+ af9015_ir_table_a_link, ARRAY_SIZE(af9015_ir_table_a_link) },
+ { AF9015_REMOTE_MSI_DIGIVOX_MINI_II_V3,
+ af9015_rc_keys_msi, ARRAY_SIZE(af9015_rc_keys_msi),
+ af9015_ir_table_msi, ARRAY_SIZE(af9015_ir_table_msi) },
+ { AF9015_REMOTE_MYGICTV_U718,
+ af9015_rc_keys_mygictv, ARRAY_SIZE(af9015_rc_keys_mygictv),
+ af9015_ir_table_mygictv, ARRAY_SIZE(af9015_ir_table_mygictv) },
+ { AF9015_REMOTE_DIGITTRADE_DVB_T,
+ af9015_rc_keys_digittrade, ARRAY_SIZE(af9015_rc_keys_digittrade),
+ af9015_ir_table_digittrade, ARRAY_SIZE(af9015_ir_table_digittrade) },
+ { AF9015_REMOTE_AVERMEDIA_KS,
+ af9015_rc_keys_avermedia, ARRAY_SIZE(af9015_rc_keys_avermedia),
+ af9015_ir_table_avermedia_ks, ARRAY_SIZE(af9015_ir_table_avermedia_ks) },
+ { }
+};
+
+/* don't add new entries here anymore, use hashes instead */
+static const struct af9015_setup af9015_setup_usbids[] = {
+ { USB_VID_LEADTEK,
+ af9015_rc_keys_leadtek, ARRAY_SIZE(af9015_rc_keys_leadtek),
+ af9015_ir_table_leadtek, ARRAY_SIZE(af9015_ir_table_leadtek) },
+ { USB_VID_VISIONPLUS,
+ af9015_rc_keys_twinhan, ARRAY_SIZE(af9015_rc_keys_twinhan),
+ af9015_ir_table_twinhan, ARRAY_SIZE(af9015_ir_table_twinhan) },
+ { USB_VID_KWORLD_2, /* TODO: use correct rc keys */
+ af9015_rc_keys_twinhan, ARRAY_SIZE(af9015_rc_keys_twinhan),
+ af9015_ir_table_kworld, ARRAY_SIZE(af9015_ir_table_kworld) },
+ { USB_VID_AVERMEDIA,
+ af9015_rc_keys_avermedia, ARRAY_SIZE(af9015_rc_keys_avermedia),
+ af9015_ir_table_avermedia, ARRAY_SIZE(af9015_ir_table_avermedia) },
+ { USB_VID_MSI_2,
+ af9015_rc_keys_msi_digivox_iii, ARRAY_SIZE(af9015_rc_keys_msi_digivox_iii),
+ af9015_ir_table_msi_digivox_iii, ARRAY_SIZE(af9015_ir_table_msi_digivox_iii) },
+ { }
+};
+
+static const struct af9015_setup af9015_setup_hashes[] = {
+ { 0xb8feb708,
+ af9015_rc_keys_msi, ARRAY_SIZE(af9015_rc_keys_msi),
+ af9015_ir_table_msi, ARRAY_SIZE(af9015_ir_table_msi) },
+ { 0xa3703d00,
+ af9015_rc_keys_a_link, ARRAY_SIZE(af9015_rc_keys_a_link),
+ af9015_ir_table_a_link, ARRAY_SIZE(af9015_ir_table_a_link) },
+ { 0x9b7dc64e,
+ af9015_rc_keys_mygictv, ARRAY_SIZE(af9015_rc_keys_mygictv),
+ af9015_ir_table_mygictv, ARRAY_SIZE(af9015_ir_table_mygictv) },
+ { }
+};
+
+static void af9015_set_remote_config(struct usb_device *udev,
+ struct dvb_usb_device_properties *props)
+{
+ const struct af9015_setup *table = NULL;
+
+ if (dvb_usb_af9015_remote) {
+ /* load remote defined as module param */
+ table = af9015_setup_match(dvb_usb_af9015_remote,
+ af9015_setup_modparam);
+ } else {
+ u16 vendor = le16_to_cpu(udev->descriptor.idVendor);
+
+ table = af9015_setup_match(af9015_config.eeprom_sum,
+ af9015_setup_hashes);
+
+ if (!table && vendor == USB_VID_AFATECH) {
+ /* Check USB manufacturer and product strings and try
+ to determine correct remote in case of chip vendor
+ reference IDs are used.
+ DO NOT ADD ANYTHING NEW HERE. Use hashes instead.
+ */
+ char manufacturer[10];
+ memset(manufacturer, 0, sizeof(manufacturer));
+ usb_string(udev, udev->descriptor.iManufacturer,
+ manufacturer, sizeof(manufacturer));
+ if (!strcmp("MSI", manufacturer)) {
+ /* iManufacturer 1 MSI
+ iProduct 2 MSI K-VOX */
+ table = af9015_setup_match(
+ AF9015_REMOTE_MSI_DIGIVOX_MINI_II_V3,
+ af9015_setup_modparam);
+ } else if (udev->descriptor.idProduct ==
+ cpu_to_le16(USB_PID_TREKSTOR_DVBT)) {
+ table = &(const struct af9015_setup){ 0,
+ af9015_rc_keys_trekstor,
+ ARRAY_SIZE(af9015_rc_keys_trekstor),
+ af9015_ir_table_trekstor,
+ ARRAY_SIZE(af9015_ir_table_trekstor)
+ };
+ }
+ } else if (!table)
+ table = af9015_setup_match(vendor, af9015_setup_usbids);
+ }
+
+ if (table) {
+ props->rc_key_map = table->rc_key_map;
+ props->rc_key_map_size = table->rc_key_map_size;
+ af9015_config.ir_table = table->ir_table;
+ af9015_config.ir_table_size = table->ir_table_size;
+ }
+}
+
static int af9015_read_config(struct usb_device *udev)
{
int ret;
u8 val, i, offset = 0;
struct req_t req = {READ_I2C, AF9015_I2C_EEPROM, 0, 0, 1, 1, &val};
- char manufacturer[10];
/* IR remote controller */
req.addr = AF9015_EEPROM_IR_MODE;
@@ -728,158 +869,18 @@
}
if (ret)
goto error;
+
+ ret = af9015_eeprom_hash(udev);
+ if (ret)
+ goto error;
+
deb_info("%s: IR mode:%d\n", __func__, val);
for (i = 0; i < af9015_properties_count; i++) {
if (val == AF9015_IR_MODE_DISABLED) {
af9015_properties[i].rc_key_map = NULL;
af9015_properties[i].rc_key_map_size = 0;
- } else if (dvb_usb_af9015_remote) {
- /* load remote defined as module param */
- switch (dvb_usb_af9015_remote) {
- case AF9015_REMOTE_A_LINK_DTU_M:
- af9015_properties[i].rc_key_map =
- af9015_rc_keys_a_link;
- af9015_properties[i].rc_key_map_size =
- ARRAY_SIZE(af9015_rc_keys_a_link);
- af9015_config.ir_table = af9015_ir_table_a_link;
- af9015_config.ir_table_size =
- ARRAY_SIZE(af9015_ir_table_a_link);
- break;
- case AF9015_REMOTE_MSI_DIGIVOX_MINI_II_V3:
- af9015_properties[i].rc_key_map =
- af9015_rc_keys_msi;
- af9015_properties[i].rc_key_map_size =
- ARRAY_SIZE(af9015_rc_keys_msi);
- af9015_config.ir_table = af9015_ir_table_msi;
- af9015_config.ir_table_size =
- ARRAY_SIZE(af9015_ir_table_msi);
- break;
- case AF9015_REMOTE_MYGICTV_U718:
- af9015_properties[i].rc_key_map =
- af9015_rc_keys_mygictv;
- af9015_properties[i].rc_key_map_size =
- ARRAY_SIZE(af9015_rc_keys_mygictv);
- af9015_config.ir_table =
- af9015_ir_table_mygictv;
- af9015_config.ir_table_size =
- ARRAY_SIZE(af9015_ir_table_mygictv);
- break;
- case AF9015_REMOTE_DIGITTRADE_DVB_T:
- af9015_properties[i].rc_key_map =
- af9015_rc_keys_digittrade;
- af9015_properties[i].rc_key_map_size =
- ARRAY_SIZE(af9015_rc_keys_digittrade);
- af9015_config.ir_table =
- af9015_ir_table_digittrade;
- af9015_config.ir_table_size =
- ARRAY_SIZE(af9015_ir_table_digittrade);
- break;
- case AF9015_REMOTE_AVERMEDIA_KS:
- af9015_properties[i].rc_key_map =
- af9015_rc_keys_avermedia;
- af9015_properties[i].rc_key_map_size =
- ARRAY_SIZE(af9015_rc_keys_avermedia);
- af9015_config.ir_table =
- af9015_ir_table_avermedia_ks;
- af9015_config.ir_table_size =
- ARRAY_SIZE(af9015_ir_table_avermedia_ks);
- break;
- }
- } else {
- switch (le16_to_cpu(udev->descriptor.idVendor)) {
- case USB_VID_LEADTEK:
- af9015_properties[i].rc_key_map =
- af9015_rc_keys_leadtek;
- af9015_properties[i].rc_key_map_size =
- ARRAY_SIZE(af9015_rc_keys_leadtek);
- af9015_config.ir_table =
- af9015_ir_table_leadtek;
- af9015_config.ir_table_size =
- ARRAY_SIZE(af9015_ir_table_leadtek);
- break;
- case USB_VID_VISIONPLUS:
- af9015_properties[i].rc_key_map =
- af9015_rc_keys_twinhan;
- af9015_properties[i].rc_key_map_size =
- ARRAY_SIZE(af9015_rc_keys_twinhan);
- af9015_config.ir_table =
- af9015_ir_table_twinhan;
- af9015_config.ir_table_size =
- ARRAY_SIZE(af9015_ir_table_twinhan);
- break;
- case USB_VID_KWORLD_2:
- /* TODO: use correct rc keys */
- af9015_properties[i].rc_key_map =
- af9015_rc_keys_twinhan;
- af9015_properties[i].rc_key_map_size =
- ARRAY_SIZE(af9015_rc_keys_twinhan);
- af9015_config.ir_table = af9015_ir_table_kworld;
- af9015_config.ir_table_size =
- ARRAY_SIZE(af9015_ir_table_kworld);
- break;
- /* Check USB manufacturer and product strings and try
- to determine correct remote in case of chip vendor
- reference IDs are used. */
- case USB_VID_AFATECH:
- memset(manufacturer, 0, sizeof(manufacturer));
- usb_string(udev, udev->descriptor.iManufacturer,
- manufacturer, sizeof(manufacturer));
- if (!strcmp("Geniatech", manufacturer)) {
- /* iManufacturer 1 Geniatech
- iProduct 2 AF9015 */
- af9015_properties[i].rc_key_map =
- af9015_rc_keys_mygictv;
- af9015_properties[i].rc_key_map_size =
- ARRAY_SIZE(af9015_rc_keys_mygictv);
- af9015_config.ir_table =
- af9015_ir_table_mygictv;
- af9015_config.ir_table_size =
- ARRAY_SIZE(af9015_ir_table_mygictv);
- } else if (!strcmp("MSI", manufacturer)) {
- /* iManufacturer 1 MSI
- iProduct 2 MSI K-VOX */
- af9015_properties[i].rc_key_map =
- af9015_rc_keys_msi;
- af9015_properties[i].rc_key_map_size =
- ARRAY_SIZE(af9015_rc_keys_msi);
- af9015_config.ir_table =
- af9015_ir_table_msi;
- af9015_config.ir_table_size =
- ARRAY_SIZE(af9015_ir_table_msi);
- } else if (udev->descriptor.idProduct ==
- cpu_to_le16(USB_PID_TREKSTOR_DVBT)) {
- af9015_properties[i].rc_key_map =
- af9015_rc_keys_trekstor;
- af9015_properties[i].rc_key_map_size =
- ARRAY_SIZE(af9015_rc_keys_trekstor);
- af9015_config.ir_table =
- af9015_ir_table_trekstor;
- af9015_config.ir_table_size =
- ARRAY_SIZE(af9015_ir_table_trekstor);
- }
- break;
- case USB_VID_AVERMEDIA:
- af9015_properties[i].rc_key_map =
- af9015_rc_keys_avermedia;
- af9015_properties[i].rc_key_map_size =
- ARRAY_SIZE(af9015_rc_keys_avermedia);
- af9015_config.ir_table =
- af9015_ir_table_avermedia;
- af9015_config.ir_table_size =
- ARRAY_SIZE(af9015_ir_table_avermedia);
- break;
- case USB_VID_MSI_2:
- af9015_properties[i].rc_key_map =
- af9015_rc_keys_msi_digivox_iii;
- af9015_properties[i].rc_key_map_size =
- ARRAY_SIZE(af9015_rc_keys_msi_digivox_iii);
- af9015_config.ir_table =
- af9015_ir_table_msi_digivox_iii;
- af9015_config.ir_table_size =
- ARRAY_SIZE(af9015_ir_table_msi_digivox_iii);
- break;
- }
- }
+ } else
+ af9015_set_remote_config(udev, &af9015_properties[i]);
}
/* TS mode - one or two receivers */
@@ -1001,6 +1002,9 @@
af9015_af9013_config[i].gpio[1] = AF9013_GPIO_LO;
af9015_af9013_config[i].rf_spec_inv = 1;
break;
+ case AF9013_TUNER_TDA18218:
+ warn("tuner NXP TDA18218 not supported yet");
+ return -ENODEV;
default:
warn("tuner id:%d not supported, please report!", val);
return -ENODEV;
@@ -1125,11 +1129,6 @@
deb_info("%s: init I2C\n", __func__);
ret = af9015_i2c_init(adap->dev);
-
- /* dump eeprom (debug) */
- ret = af9015_eeprom_dump(adap->dev);
- if (ret)
- return ret;
} else {
/* select I2C adapter */
i2c_adap = &state->i2c_adap;
@@ -1295,6 +1294,8 @@
/* 25 */{USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_399U_2)},
{USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_PC160_T)},
{USB_DEVICE(USB_VID_KWORLD_2, USB_PID_SVEON_STV20)},
+ {USB_DEVICE(USB_VID_KWORLD_2, USB_PID_TINYTWIN_2)},
+ {USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV2000DS)},
{0},
};
MODULE_DEVICE_TABLE(usb, af9015_usb_table);
@@ -1381,7 +1382,8 @@
},
{
.name = "DigitalNow TinyTwin DVB-T Receiver",
- .cold_ids = {&af9015_usb_table[5], NULL},
+ .cold_ids = {&af9015_usb_table[5],
+ &af9015_usb_table[28], NULL},
.warm_ids = {NULL},
},
{
@@ -1566,7 +1568,7 @@
.i2c_algo = &af9015_i2c_algo,
- .num_device_descs = 6, /* max 9 */
+ .num_device_descs = 7, /* max 9 */
.devices = {
{
.name = "AverMedia AVerTV Volar GPS 805 (A805)",
@@ -1600,6 +1602,11 @@
.cold_ids = {&af9015_usb_table[27], NULL},
.warm_ids = {NULL},
},
+ {
+ .name = "Leadtek WinFast DTV2000DS",
+ .cold_ids = {&af9015_usb_table[29], NULL},
+ .warm_ids = {NULL},
+ },
}
},
};
diff --git a/drivers/media/dvb/dvb-usb/af9015.h b/drivers/media/dvb/dvb-usb/af9015.h
index 931c851..ef36b18 100644
--- a/drivers/media/dvb/dvb-usb/af9015.h
+++ b/drivers/media/dvb/dvb-usb/af9015.h
@@ -107,6 +107,7 @@
u16 mt2060_if1[2];
u16 firmware_size;
u16 firmware_checksum;
+ u32 eeprom_sum;
u8 *ir_table;
u16 ir_table_size;
};
diff --git a/drivers/media/dvb/dvb-usb/az6027.c b/drivers/media/dvb/dvb-usb/az6027.c
new file mode 100644
index 0000000..d7290b2
--- /dev/null
+++ b/drivers/media/dvb/dvb-usb/az6027.c
@@ -0,0 +1,1151 @@
+/* DVB USB compliant Linux driver for the AZUREWAVE DVB-S/S2 USB2.0 (AZ6027)
+ * receiver.
+ *
+ * Copyright (C) 2009 Adams.Xu <adams.xu@azwave.com.cn>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation, version 2.
+ *
+ * see Documentation/dvb/README.dvb-usb for more information
+ */
+#include "az6027.h"
+
+#include "stb0899_drv.h"
+#include "stb0899_reg.h"
+#include "stb0899_cfg.h"
+
+#include "stb6100.h"
+#include "stb6100_cfg.h"
+#include "dvb_ca_en50221.h"
+
+int dvb_usb_az6027_debug;
+module_param_named(debug, dvb_usb_az6027_debug, int, 0644);
+MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2,rc=4 (or-able))." DVB_USB_DEBUG_STATUS);
+
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+struct az6027_device_state {
+ struct dvb_ca_en50221 ca;
+ struct mutex ca_mutex;
+ u8 power_state;
+};
+
+static const struct stb0899_s1_reg az6027_stb0899_s1_init_1[] = {
+
+ /* 0x0000000b, SYSREG */
+ { STB0899_DEV_ID , 0x30 },
+ { STB0899_DISCNTRL1 , 0x32 },
+ { STB0899_DISCNTRL2 , 0x80 },
+ { STB0899_DISRX_ST0 , 0x04 },
+ { STB0899_DISRX_ST1 , 0x00 },
+ { STB0899_DISPARITY , 0x00 },
+ { STB0899_DISFIFO , 0x00 },
+ { STB0899_DISSTATUS , 0x20 },
+ { STB0899_DISF22 , 0x99 },
+ { STB0899_DISF22RX , 0xa8 },
+ /* SYSREG ? */
+ { STB0899_ACRPRESC , 0x11 },
+ { STB0899_ACRDIV1 , 0x0a },
+ { STB0899_ACRDIV2 , 0x05 },
+ { STB0899_DACR1 , 0x00 },
+ { STB0899_DACR2 , 0x00 },
+ { STB0899_OUTCFG , 0x00 },
+ { STB0899_MODECFG , 0x00 },
+ { STB0899_IRQSTATUS_3 , 0xfe },
+ { STB0899_IRQSTATUS_2 , 0x03 },
+ { STB0899_IRQSTATUS_1 , 0x7c },
+ { STB0899_IRQSTATUS_0 , 0xf4 },
+ { STB0899_IRQMSK_3 , 0xf3 },
+ { STB0899_IRQMSK_2 , 0xfc },
+ { STB0899_IRQMSK_1 , 0xff },
+ { STB0899_IRQMSK_0 , 0xff },
+ { STB0899_IRQCFG , 0x00 },
+ { STB0899_I2CCFG , 0x88 },
+ { STB0899_I2CRPT , 0x58 },
+ { STB0899_IOPVALUE5 , 0x00 },
+ { STB0899_IOPVALUE4 , 0x33 },
+ { STB0899_IOPVALUE3 , 0x6d },
+ { STB0899_IOPVALUE2 , 0x90 },
+ { STB0899_IOPVALUE1 , 0x60 },
+ { STB0899_IOPVALUE0 , 0x00 },
+ { STB0899_GPIO00CFG , 0x82 },
+ { STB0899_GPIO01CFG , 0x82 },
+ { STB0899_GPIO02CFG , 0x82 },
+ { STB0899_GPIO03CFG , 0x82 },
+ { STB0899_GPIO04CFG , 0x82 },
+ { STB0899_GPIO05CFG , 0x82 },
+ { STB0899_GPIO06CFG , 0x82 },
+ { STB0899_GPIO07CFG , 0x82 },
+ { STB0899_GPIO08CFG , 0x82 },
+ { STB0899_GPIO09CFG , 0x82 },
+ { STB0899_GPIO10CFG , 0x82 },
+ { STB0899_GPIO11CFG , 0x82 },
+ { STB0899_GPIO12CFG , 0x82 },
+ { STB0899_GPIO13CFG , 0x82 },
+ { STB0899_GPIO14CFG , 0x82 },
+ { STB0899_GPIO15CFG , 0x82 },
+ { STB0899_GPIO16CFG , 0x82 },
+ { STB0899_GPIO17CFG , 0x82 },
+ { STB0899_GPIO18CFG , 0x82 },
+ { STB0899_GPIO19CFG , 0x82 },
+ { STB0899_GPIO20CFG , 0x82 },
+ { STB0899_SDATCFG , 0xb8 },
+ { STB0899_SCLTCFG , 0xba },
+ { STB0899_AGCRFCFG , 0x1c }, /* 0x11 */
+ { STB0899_GPIO22 , 0x82 }, /* AGCBB2CFG */
+ { STB0899_GPIO21 , 0x91 }, /* AGCBB1CFG */
+ { STB0899_DIRCLKCFG , 0x82 },
+ { STB0899_CLKOUT27CFG , 0x7e },
+ { STB0899_STDBYCFG , 0x82 },
+ { STB0899_CS0CFG , 0x82 },
+ { STB0899_CS1CFG , 0x82 },
+ { STB0899_DISEQCOCFG , 0x20 },
+ { STB0899_GPIO32CFG , 0x82 },
+ { STB0899_GPIO33CFG , 0x82 },
+ { STB0899_GPIO34CFG , 0x82 },
+ { STB0899_GPIO35CFG , 0x82 },
+ { STB0899_GPIO36CFG , 0x82 },
+ { STB0899_GPIO37CFG , 0x82 },
+ { STB0899_GPIO38CFG , 0x82 },
+ { STB0899_GPIO39CFG , 0x82 },
+ { STB0899_NCOARSE , 0x17 }, /* 0x15 = 27 Mhz Clock, F/3 = 198MHz, F/6 = 99MHz */
+ { STB0899_SYNTCTRL , 0x02 }, /* 0x00 = CLK from CLKI, 0x02 = CLK from XTALI */
+ { STB0899_FILTCTRL , 0x00 },
+ { STB0899_SYSCTRL , 0x01 },
+ { STB0899_STOPCLK1 , 0x20 },
+ { STB0899_STOPCLK2 , 0x00 },
+ { STB0899_INTBUFSTATUS , 0x00 },
+ { STB0899_INTBUFCTRL , 0x0a },
+ { 0xffff , 0xff },
+};
+
+static const struct stb0899_s1_reg az6027_stb0899_s1_init_3[] = {
+ { STB0899_DEMOD , 0x00 },
+ { STB0899_RCOMPC , 0xc9 },
+ { STB0899_AGC1CN , 0x01 },
+ { STB0899_AGC1REF , 0x10 },
+ { STB0899_RTC , 0x23 },
+ { STB0899_TMGCFG , 0x4e },
+ { STB0899_AGC2REF , 0x34 },
+ { STB0899_TLSR , 0x84 },
+ { STB0899_CFD , 0xf7 },
+ { STB0899_ACLC , 0x87 },
+ { STB0899_BCLC , 0x94 },
+ { STB0899_EQON , 0x41 },
+ { STB0899_LDT , 0xf1 },
+ { STB0899_LDT2 , 0xe3 },
+ { STB0899_EQUALREF , 0xb4 },
+ { STB0899_TMGRAMP , 0x10 },
+ { STB0899_TMGTHD , 0x30 },
+ { STB0899_IDCCOMP , 0xfd },
+ { STB0899_QDCCOMP , 0xff },
+ { STB0899_POWERI , 0x0c },
+ { STB0899_POWERQ , 0x0f },
+ { STB0899_RCOMP , 0x6c },
+ { STB0899_AGCIQIN , 0x80 },
+ { STB0899_AGC2I1 , 0x06 },
+ { STB0899_AGC2I2 , 0x00 },
+ { STB0899_TLIR , 0x30 },
+ { STB0899_RTF , 0x7f },
+ { STB0899_DSTATUS , 0x00 },
+ { STB0899_LDI , 0xbc },
+ { STB0899_CFRM , 0xea },
+ { STB0899_CFRL , 0x31 },
+ { STB0899_NIRM , 0x2b },
+ { STB0899_NIRL , 0x80 },
+ { STB0899_ISYMB , 0x1d },
+ { STB0899_QSYMB , 0xa6 },
+ { STB0899_SFRH , 0x2f },
+ { STB0899_SFRM , 0x68 },
+ { STB0899_SFRL , 0x40 },
+ { STB0899_SFRUPH , 0x2f },
+ { STB0899_SFRUPM , 0x68 },
+ { STB0899_SFRUPL , 0x40 },
+ { STB0899_EQUAI1 , 0x02 },
+ { STB0899_EQUAQ1 , 0xff },
+ { STB0899_EQUAI2 , 0x04 },
+ { STB0899_EQUAQ2 , 0x05 },
+ { STB0899_EQUAI3 , 0x02 },
+ { STB0899_EQUAQ3 , 0xfd },
+ { STB0899_EQUAI4 , 0x03 },
+ { STB0899_EQUAQ4 , 0x07 },
+ { STB0899_EQUAI5 , 0x08 },
+ { STB0899_EQUAQ5 , 0xf5 },
+ { STB0899_DSTATUS2 , 0x00 },
+ { STB0899_VSTATUS , 0x00 },
+ { STB0899_VERROR , 0x86 },
+ { STB0899_IQSWAP , 0x2a },
+ { STB0899_ECNT1M , 0x00 },
+ { STB0899_ECNT1L , 0x00 },
+ { STB0899_ECNT2M , 0x00 },
+ { STB0899_ECNT2L , 0x00 },
+ { STB0899_ECNT3M , 0x0a },
+ { STB0899_ECNT3L , 0xad },
+ { STB0899_FECAUTO1 , 0x06 },
+ { STB0899_FECM , 0x01 },
+ { STB0899_VTH12 , 0xb0 },
+ { STB0899_VTH23 , 0x7a },
+ { STB0899_VTH34 , 0x58 },
+ { STB0899_VTH56 , 0x38 },
+ { STB0899_VTH67 , 0x34 },
+ { STB0899_VTH78 , 0x24 },
+ { STB0899_PRVIT , 0xff },
+ { STB0899_VITSYNC , 0x19 },
+ { STB0899_RSULC , 0xb1 }, /* DVB = 0xb1, DSS = 0xa1 */
+ { STB0899_TSULC , 0x42 },
+ { STB0899_RSLLC , 0x41 },
+ { STB0899_TSLPL , 0x12 },
+ { STB0899_TSCFGH , 0x0c },
+ { STB0899_TSCFGM , 0x00 },
+ { STB0899_TSCFGL , 0x00 },
+ { STB0899_TSOUT , 0x69 }, /* 0x0d for CAM */
+ { STB0899_RSSYNCDEL , 0x00 },
+ { STB0899_TSINHDELH , 0x02 },
+ { STB0899_TSINHDELM , 0x00 },
+ { STB0899_TSINHDELL , 0x00 },
+ { STB0899_TSLLSTKM , 0x1b },
+ { STB0899_TSLLSTKL , 0xb3 },
+ { STB0899_TSULSTKM , 0x00 },
+ { STB0899_TSULSTKL , 0x00 },
+ { STB0899_PCKLENUL , 0xbc },
+ { STB0899_PCKLENLL , 0xcc },
+ { STB0899_RSPCKLEN , 0xbd },
+ { STB0899_TSSTATUS , 0x90 },
+ { STB0899_ERRCTRL1 , 0xb6 },
+ { STB0899_ERRCTRL2 , 0x95 },
+ { STB0899_ERRCTRL3 , 0x8d },
+ { STB0899_DMONMSK1 , 0x27 },
+ { STB0899_DMONMSK0 , 0x03 },
+ { STB0899_DEMAPVIT , 0x5c },
+ { STB0899_PLPARM , 0x19 },
+ { STB0899_PDELCTRL , 0x48 },
+ { STB0899_PDELCTRL2 , 0x00 },
+ { STB0899_BBHCTRL1 , 0x00 },
+ { STB0899_BBHCTRL2 , 0x00 },
+ { STB0899_HYSTTHRESH , 0x77 },
+ { STB0899_MATCSTM , 0x00 },
+ { STB0899_MATCSTL , 0x00 },
+ { STB0899_UPLCSTM , 0x00 },
+ { STB0899_UPLCSTL , 0x00 },
+ { STB0899_DFLCSTM , 0x00 },
+ { STB0899_DFLCSTL , 0x00 },
+ { STB0899_SYNCCST , 0x00 },
+ { STB0899_SYNCDCSTM , 0x00 },
+ { STB0899_SYNCDCSTL , 0x00 },
+ { STB0899_ISI_ENTRY , 0x00 },
+ { STB0899_ISI_BIT_EN , 0x00 },
+ { STB0899_MATSTRM , 0xf0 },
+ { STB0899_MATSTRL , 0x02 },
+ { STB0899_UPLSTRM , 0x45 },
+ { STB0899_UPLSTRL , 0x60 },
+ { STB0899_DFLSTRM , 0xe3 },
+ { STB0899_DFLSTRL , 0x00 },
+ { STB0899_SYNCSTR , 0x47 },
+ { STB0899_SYNCDSTRM , 0x05 },
+ { STB0899_SYNCDSTRL , 0x18 },
+ { STB0899_CFGPDELSTATUS1 , 0x19 },
+ { STB0899_CFGPDELSTATUS2 , 0x2b },
+ { STB0899_BBFERRORM , 0x00 },
+ { STB0899_BBFERRORL , 0x01 },
+ { STB0899_UPKTERRORM , 0x00 },
+ { STB0899_UPKTERRORL , 0x00 },
+ { 0xffff , 0xff },
+};
+
+
+
+struct stb0899_config az6027_stb0899_config = {
+ .init_dev = az6027_stb0899_s1_init_1,
+ .init_s2_demod = stb0899_s2_init_2,
+ .init_s1_demod = az6027_stb0899_s1_init_3,
+ .init_s2_fec = stb0899_s2_init_4,
+ .init_tst = stb0899_s1_init_5,
+
+ .demod_address = 0xd0, /* 0x68, 0xd0 >> 1 */
+
+ .xtal_freq = 27000000,
+ .inversion = IQ_SWAP_ON, /* 1 */
+
+ .lo_clk = 76500000,
+ .hi_clk = 99000000,
+
+ .esno_ave = STB0899_DVBS2_ESNO_AVE,
+ .esno_quant = STB0899_DVBS2_ESNO_QUANT,
+ .avframes_coarse = STB0899_DVBS2_AVFRAMES_COARSE,
+ .avframes_fine = STB0899_DVBS2_AVFRAMES_FINE,
+ .miss_threshold = STB0899_DVBS2_MISS_THRESHOLD,
+ .uwp_threshold_acq = STB0899_DVBS2_UWP_THRESHOLD_ACQ,
+ .uwp_threshold_track = STB0899_DVBS2_UWP_THRESHOLD_TRACK,
+ .uwp_threshold_sof = STB0899_DVBS2_UWP_THRESHOLD_SOF,
+ .sof_search_timeout = STB0899_DVBS2_SOF_SEARCH_TIMEOUT,
+
+ .btr_nco_bits = STB0899_DVBS2_BTR_NCO_BITS,
+ .btr_gain_shift_offset = STB0899_DVBS2_BTR_GAIN_SHIFT_OFFSET,
+ .crl_nco_bits = STB0899_DVBS2_CRL_NCO_BITS,
+ .ldpc_max_iter = STB0899_DVBS2_LDPC_MAX_ITER,
+
+ .tuner_get_frequency = stb6100_get_frequency,
+ .tuner_set_frequency = stb6100_set_frequency,
+ .tuner_set_bandwidth = stb6100_set_bandwidth,
+ .tuner_get_bandwidth = stb6100_get_bandwidth,
+ .tuner_set_rfsiggain = NULL,
+};
+
+struct stb6100_config az6027_stb6100_config = {
+ .tuner_address = 0xc0,
+ .refclock = 27000000,
+};
+
+
+/* check for mutex FIXME */
+int az6027_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 *b, int blen)
+{
+ int ret = -1;
+ if (mutex_lock_interruptible(&d->usb_mutex))
+ return -EAGAIN;
+
+ ret = usb_control_msg(d->udev,
+ usb_rcvctrlpipe(d->udev, 0),
+ req,
+ USB_TYPE_VENDOR | USB_DIR_IN,
+ value,
+ index,
+ b,
+ blen,
+ 2000);
+
+ if (ret < 0) {
+ warn("usb in operation failed. (%d)", ret);
+ ret = -EIO;
+ } else
+ ret = 0;
+
+ deb_xfer("in: req. %02x, val: %04x, ind: %04x, buffer: ", req, value, index);
+ debug_dump(b, blen, deb_xfer);
+
+ mutex_unlock(&d->usb_mutex);
+ return ret;
+}
+
+static int az6027_usb_out_op(struct dvb_usb_device *d,
+ u8 req,
+ u16 value,
+ u16 index,
+ u8 *b,
+ int blen)
+{
+ int ret;
+
+ deb_xfer("out: req. %02x, val: %04x, ind: %04x, buffer: ", req, value, index);
+ debug_dump(b, blen, deb_xfer);
+
+ if (mutex_lock_interruptible(&d->usb_mutex))
+ return -EAGAIN;
+
+ ret = usb_control_msg(d->udev,
+ usb_sndctrlpipe(d->udev, 0),
+ req,
+ USB_TYPE_VENDOR | USB_DIR_OUT,
+ value,
+ index,
+ b,
+ blen,
+ 2000);
+
+ if (ret != blen) {
+ warn("usb out operation failed. (%d)", ret);
+ mutex_unlock(&d->usb_mutex);
+ return -EIO;
+ } else{
+ mutex_unlock(&d->usb_mutex);
+ return 0;
+ }
+}
+
+static int az6027_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
+{
+ int ret;
+ u8 req;
+ u16 value;
+ u16 index;
+ int blen;
+
+ deb_info("%s %d", __func__, onoff);
+
+ req = 0xBC;
+ value = onoff;
+ index = 0;
+ blen = 0;
+
+ ret = az6027_usb_out_op(adap->dev, req, value, index, NULL, blen);
+ if (ret != 0)
+ warn("usb out operation failed. (%d)", ret);
+
+ return ret;
+}
+
+/* keys for the enclosed remote control */
+static struct dvb_usb_rc_key az6027_rc_keys[] = {
+ { 0x01, KEY_1 },
+ { 0x02, KEY_2 },
+};
+
+/* remote control stuff (does not work with my box) */
+static int az6027_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
+{
+ return 0;
+}
+
+/*
+int az6027_power_ctrl(struct dvb_usb_device *d, int onoff)
+{
+ u8 v = onoff;
+ return az6027_usb_out_op(d,0xBC,v,3,NULL,1);
+}
+*/
+
+static int az6027_ci_read_attribute_mem(struct dvb_ca_en50221 *ca,
+ int slot,
+ int address)
+{
+ struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data;
+ struct az6027_device_state *state = (struct az6027_device_state *)d->priv;
+
+ int ret;
+ u8 req;
+ u16 value;
+ u16 index;
+ int blen;
+ u8 b[12];
+
+ if (slot != 0)
+ return -EINVAL;
+
+ mutex_lock(&state->ca_mutex);
+
+ req = 0xC1;
+ value = address;
+ index = 0;
+ blen = 1;
+
+ ret = az6027_usb_in_op(d, req, value, index, b, blen);
+ if (ret < 0) {
+ warn("usb in operation failed. (%d)", ret);
+ ret = -EINVAL;
+ } else {
+ ret = b[0];
+ }
+
+ mutex_unlock(&state->ca_mutex);
+ return ret;
+}
+
+static int az6027_ci_write_attribute_mem(struct dvb_ca_en50221 *ca,
+ int slot,
+ int address,
+ u8 value)
+{
+ struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data;
+ struct az6027_device_state *state = (struct az6027_device_state *)d->priv;
+
+ int ret;
+ u8 req;
+ u16 value1;
+ u16 index;
+ int blen;
+
+ deb_info("%s %d", __func__, slot);
+ if (slot != 0)
+ return -EINVAL;
+
+ mutex_lock(&state->ca_mutex);
+ req = 0xC2;
+ value1 = address;
+ index = value;
+ blen = 0;
+
+ ret = az6027_usb_out_op(d, req, value1, index, NULL, blen);
+ if (ret != 0)
+ warn("usb out operation failed. (%d)", ret);
+
+ mutex_unlock(&state->ca_mutex);
+ return ret;
+}
+
+static int az6027_ci_read_cam_control(struct dvb_ca_en50221 *ca,
+ int slot,
+ u8 address)
+{
+ struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data;
+ struct az6027_device_state *state = (struct az6027_device_state *)d->priv;
+
+ int ret;
+ u8 req;
+ u16 value;
+ u16 index;
+ int blen;
+ u8 b[12];
+
+ if (slot != 0)
+ return -EINVAL;
+
+ mutex_lock(&state->ca_mutex);
+
+ req = 0xC3;
+ value = address;
+ index = 0;
+ blen = 2;
+
+ ret = az6027_usb_in_op(d, req, value, index, b, blen);
+ if (ret < 0) {
+ warn("usb in operation failed. (%d)", ret);
+ ret = -EINVAL;
+ } else {
+ if (b[0] == 0)
+ warn("Read CI IO error");
+
+ ret = b[1];
+ deb_info("read cam data = %x from 0x%x", b[1], value);
+ }
+
+ mutex_unlock(&state->ca_mutex);
+ return ret;
+}
+
+static int az6027_ci_write_cam_control(struct dvb_ca_en50221 *ca,
+ int slot,
+ u8 address,
+ u8 value)
+{
+ struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data;
+ struct az6027_device_state *state = (struct az6027_device_state *)d->priv;
+
+ int ret;
+ u8 req;
+ u16 value1;
+ u16 index;
+ int blen;
+
+ if (slot != 0)
+ return -EINVAL;
+
+ mutex_lock(&state->ca_mutex);
+ req = 0xC4;
+ value1 = address;
+ index = value;
+ blen = 0;
+
+ ret = az6027_usb_out_op(d, req, value1, index, NULL, blen);
+ if (ret != 0) {
+ warn("usb out operation failed. (%d)", ret);
+ goto failed;
+ }
+
+failed:
+ mutex_unlock(&state->ca_mutex);
+ return ret;
+}
+
+static int CI_CamReady(struct dvb_ca_en50221 *ca, int slot)
+{
+ struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data;
+
+ int ret;
+ u8 req;
+ u16 value;
+ u16 index;
+ int blen;
+ u8 b[12];
+
+ req = 0xC8;
+ value = 0;
+ index = 0;
+ blen = 1;
+
+ ret = az6027_usb_in_op(d, req, value, index, b, blen);
+ if (ret < 0) {
+ warn("usb in operation failed. (%d)", ret);
+ ret = -EIO;
+ } else{
+ ret = b[0];
+ }
+ return ret;
+}
+
+static int az6027_ci_slot_reset(struct dvb_ca_en50221 *ca, int slot)
+{
+ struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data;
+ struct az6027_device_state *state = (struct az6027_device_state *)d->priv;
+
+ int ret, i;
+ u8 req;
+ u16 value;
+ u16 index;
+ int blen;
+
+ mutex_lock(&state->ca_mutex);
+
+ req = 0xC6;
+ value = 1;
+ index = 0;
+ blen = 0;
+
+ ret = az6027_usb_out_op(d, req, value, index, NULL, blen);
+ if (ret != 0) {
+ warn("usb out operation failed. (%d)", ret);
+ goto failed;
+ }
+
+ msleep(500);
+ req = 0xC6;
+ value = 0;
+ index = 0;
+ blen = 0;
+
+ ret = az6027_usb_out_op(d, req, value, index, NULL, blen);
+ if (ret != 0) {
+ warn("usb out operation failed. (%d)", ret);
+ goto failed;
+ }
+
+ for (i = 0; i < 15; i++) {
+ msleep(100);
+
+ if (CI_CamReady(ca, slot)) {
+ deb_info("CAM Ready");
+ break;
+ }
+ }
+ msleep(5000);
+
+failed:
+ mutex_unlock(&state->ca_mutex);
+ return ret;
+}
+
+static int az6027_ci_slot_shutdown(struct dvb_ca_en50221 *ca, int slot)
+{
+ return 0;
+}
+
+static int az6027_ci_slot_ts_enable(struct dvb_ca_en50221 *ca, int slot)
+{
+ struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data;
+ struct az6027_device_state *state = (struct az6027_device_state *)d->priv;
+
+ int ret;
+ u8 req;
+ u16 value;
+ u16 index;
+ int blen;
+
+ deb_info("%s", __func__);
+ mutex_lock(&state->ca_mutex);
+ req = 0xC7;
+ value = 1;
+ index = 0;
+ blen = 0;
+
+ ret = az6027_usb_out_op(d, req, value, index, NULL, blen);
+ if (ret != 0) {
+ warn("usb out operation failed. (%d)", ret);
+ goto failed;
+ }
+
+failed:
+ mutex_unlock(&state->ca_mutex);
+ return ret;
+}
+
+static int az6027_ci_poll_slot_status(struct dvb_ca_en50221 *ca, int slot, int open)
+{
+ struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data;
+ struct az6027_device_state *state = (struct az6027_device_state *)d->priv;
+ int ret;
+ u8 req;
+ u16 value;
+ u16 index;
+ int blen;
+ u8 b[12];
+
+ mutex_lock(&state->ca_mutex);
+
+ req = 0xC5;
+ value = 0;
+ index = 0;
+ blen = 1;
+
+ ret = az6027_usb_in_op(d, req, value, index, b, blen);
+ if (ret < 0) {
+ warn("usb in operation failed. (%d)", ret);
+ ret = -EIO;
+ } else
+ ret = 0;
+
+ if (b[0] == 0) {
+ ret = 0;
+
+ } else if (b[0] == 1) {
+ ret = DVB_CA_EN50221_POLL_CAM_PRESENT |
+ DVB_CA_EN50221_POLL_CAM_READY;
+ }
+
+ mutex_unlock(&state->ca_mutex);
+ return ret;
+}
+
+
+static void az6027_ci_uninit(struct dvb_usb_device *d)
+{
+ struct az6027_device_state *state;
+
+ deb_info("%s", __func__);
+
+ if (NULL == d)
+ return;
+
+ state = (struct az6027_device_state *)d->priv;
+ if (NULL == state)
+ return;
+
+ if (NULL == state->ca.data)
+ return;
+
+ dvb_ca_en50221_release(&state->ca);
+
+ memset(&state->ca, 0, sizeof(state->ca));
+}
+
+
+static int az6027_ci_init(struct dvb_usb_adapter *a)
+{
+ struct dvb_usb_device *d = a->dev;
+ struct az6027_device_state *state = (struct az6027_device_state *)d->priv;
+ int ret;
+
+ deb_info("%s", __func__);
+
+ mutex_init(&state->ca_mutex);
+
+ state->ca.owner = THIS_MODULE;
+ state->ca.read_attribute_mem = az6027_ci_read_attribute_mem;
+ state->ca.write_attribute_mem = az6027_ci_write_attribute_mem;
+ state->ca.read_cam_control = az6027_ci_read_cam_control;
+ state->ca.write_cam_control = az6027_ci_write_cam_control;
+ state->ca.slot_reset = az6027_ci_slot_reset;
+ state->ca.slot_shutdown = az6027_ci_slot_shutdown;
+ state->ca.slot_ts_enable = az6027_ci_slot_ts_enable;
+ state->ca.poll_slot_status = az6027_ci_poll_slot_status;
+ state->ca.data = d;
+
+ ret = dvb_ca_en50221_init(&a->dvb_adap,
+ &state->ca,
+ 0, /* flags */
+ 1);/* n_slots */
+ if (ret != 0) {
+ err("Cannot initialize CI: Error %d.", ret);
+ memset(&state->ca, 0, sizeof(state->ca));
+ return ret;
+ }
+
+ deb_info("CI initialized.");
+
+ return 0;
+}
+
+/*
+static int az6027_read_mac_addr(struct dvb_usb_device *d, u8 mac[6])
+{
+ az6027_usb_in_op(d, 0xb7, 6, 0, &mac[0], 6);
+ return 0;
+}
+*/
+
+static int az6027_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
+{
+
+ u8 buf;
+ int ret;
+ struct dvb_usb_adapter *adap = fe->dvb->priv;
+
+ struct i2c_msg i2c_msg = {
+ .addr = 0x99,
+ .flags = 0,
+ .buf = &buf,
+ .len = 1
+ };
+
+ /*
+ * 2 --18v
+ * 1 --13v
+ * 0 --off
+ */
+ switch (voltage) {
+ case SEC_VOLTAGE_13:
+ buf = 1;
+ ret = i2c_transfer(&adap->dev->i2c_adap, &i2c_msg, 1);
+ break;
+
+ case SEC_VOLTAGE_18:
+ buf = 2;
+ ret = i2c_transfer(&adap->dev->i2c_adap, &i2c_msg, 1);
+ break;
+
+ case SEC_VOLTAGE_OFF:
+ buf = 0;
+ ret = i2c_transfer(&adap->dev->i2c_adap, &i2c_msg, 1);
+ break;
+
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+
+static int az6027_frontend_poweron(struct dvb_usb_adapter *adap)
+{
+ int ret;
+ u8 req;
+ u16 value;
+ u16 index;
+ int blen;
+
+ req = 0xBC;
+ value = 1; /* power on */
+ index = 3;
+ blen = 0;
+
+ ret = az6027_usb_out_op(adap->dev, req, value, index, NULL, blen);
+ if (ret != 0)
+ return -EIO;
+
+ return 0;
+}
+static int az6027_frontend_reset(struct dvb_usb_adapter *adap)
+{
+ int ret;
+ u8 req;
+ u16 value;
+ u16 index;
+ int blen;
+
+ /* reset demodulator */
+ req = 0xC0;
+ value = 1; /* high */
+ index = 3;
+ blen = 0;
+
+ ret = az6027_usb_out_op(adap->dev, req, value, index, NULL, blen);
+ if (ret != 0)
+ return -EIO;
+
+ req = 0xC0;
+ value = 0; /* low */
+ index = 3;
+ blen = 0;
+ msleep_interruptible(200);
+
+ ret = az6027_usb_out_op(adap->dev, req, value, index, NULL, blen);
+ if (ret != 0)
+ return -EIO;
+
+ msleep_interruptible(200);
+
+ req = 0xC0;
+ value = 1; /*high */
+ index = 3;
+ blen = 0;
+
+ ret = az6027_usb_out_op(adap->dev, req, value, index, NULL, blen);
+ if (ret != 0)
+ return -EIO;
+
+ msleep_interruptible(200);
+ return 0;
+}
+
+static int az6027_frontend_tsbypass(struct dvb_usb_adapter *adap, int onoff)
+{
+ int ret;
+ u8 req;
+ u16 value;
+ u16 index;
+ int blen;
+
+ /* TS passthrough */
+ req = 0xC7;
+ value = onoff;
+ index = 0;
+ blen = 0;
+
+ ret = az6027_usb_out_op(adap->dev, req, value, index, NULL, blen);
+ if (ret != 0)
+ return -EIO;
+
+ return 0;
+}
+
+static int az6027_frontend_attach(struct dvb_usb_adapter *adap)
+{
+
+ az6027_frontend_poweron(adap);
+ az6027_frontend_reset(adap);
+
+ deb_info("adap = %p, dev = %p\n", adap, adap->dev);
+ adap->fe = stb0899_attach(&az6027_stb0899_config, &adap->dev->i2c_adap);
+
+ if (adap->fe) {
+ deb_info("found STB0899 DVB-S/DVB-S2 frontend @0x%02x", az6027_stb0899_config.demod_address);
+ if (stb6100_attach(adap->fe, &az6027_stb6100_config, &adap->dev->i2c_adap)) {
+ deb_info("found STB6100 DVB-S/DVB-S2 frontend @0x%02x", az6027_stb6100_config.tuner_address);
+ adap->fe->ops.set_voltage = az6027_set_voltage;
+ az6027_ci_init(adap);
+ } else {
+ adap->fe = NULL;
+ }
+ } else
+ warn("no front-end attached\n");
+
+ az6027_frontend_tsbypass(adap, 0);
+
+ return 0;
+}
+
+static struct dvb_usb_device_properties az6027_properties;
+
+static void az6027_usb_disconnect(struct usb_interface *intf)
+{
+ struct dvb_usb_device *d = usb_get_intfdata(intf);
+ az6027_ci_uninit(d);
+ dvb_usb_device_exit(intf);
+}
+
+
+static int az6027_usb_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ return dvb_usb_device_init(intf,
+ &az6027_properties,
+ THIS_MODULE,
+ NULL,
+ adapter_nr);
+}
+
+/* I2C */
+static int az6027_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], int num)
+{
+ struct dvb_usb_device *d = i2c_get_adapdata(adap);
+ int i = 0, j = 0, len = 0;
+ int ret;
+ u16 index;
+ u16 value;
+ int length;
+ u8 req;
+ u8 data[256];
+
+ if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
+ return -EAGAIN;
+
+ if (num > 2)
+ warn("more than 2 i2c messages at a time is not handled yet. TODO.");
+
+ for (i = 0; i < num; i++) {
+
+ if (msg[i].addr == 0x99) {
+ req = 0xBE;
+ index = 0;
+ value = msg[i].buf[0] & 0x00ff;
+ length = 1;
+ az6027_usb_out_op(d, req, value, index, data, length);
+ }
+
+ if (msg[i].addr == 0xd0) {
+ /* write/read request */
+ if (i + 1 < num && (msg[i + 1].flags & I2C_M_RD)) {
+ req = 0xB9;
+ index = (((msg[i].buf[0] << 8) & 0xff00) | (msg[i].buf[1] & 0x00ff));
+ value = msg[i].addr + (msg[i].len << 8);
+ length = msg[i + 1].len + 6;
+ ret = az6027_usb_in_op(d, req, value, index, data, length);
+ len = msg[i + 1].len;
+ for (j = 0; j < len; j++)
+ msg[i + 1].buf[j] = data[j + 5];
+
+ i++;
+ } else {
+
+ if (msg[i].addr == 0xd0) {
+ /* demod 16bit addr */
+ req = 0xBD;
+ index = (((msg[i].buf[0] << 8) & 0xff00) | (msg[i].buf[1] & 0x00ff));
+ value = msg[i].addr + (2 << 8);
+ length = msg[i].len - 2;
+ len = msg[i].len - 2;
+ for (j = 0; j < len; j++)
+ data[j] = msg[i].buf[j + 2];
+
+ }
+ az6027_usb_out_op(d, req, value, index, data, length);
+ }
+ }
+
+ if (msg[i].addr == 0xc0) {
+ if (msg[i].flags & I2C_M_RD) {
+
+ req = 0xB9;
+ index = 0x0;
+ value = msg[i].addr;
+ length = msg[i].len + 6;
+ ret = az6027_usb_in_op(d, req, value, index, data, length);
+ len = msg[i].len;
+ for (j = 0; j < len; j++)
+ msg[i].buf[j] = data[j + 5];
+
+ } else {
+
+ req = 0xBD;
+ index = msg[i].buf[0] & 0x00FF;
+ value = msg[i].addr + (1 << 8);
+ length = msg[i].len - 1;
+ len = msg[i].len - 1;
+
+ for (j = 0; j < len; j++)
+ data[j] = msg[i].buf[j + 1];
+
+ az6027_usb_out_op(d, req, value, index, data, length);
+ }
+ }
+ }
+ mutex_unlock(&d->i2c_mutex);
+
+ return i;
+}
+
+
+static u32 az6027_i2c_func(struct i2c_adapter *adapter)
+{
+ return I2C_FUNC_I2C;
+}
+
+static struct i2c_algorithm az6027_i2c_algo = {
+ .master_xfer = az6027_i2c_xfer,
+ .functionality = az6027_i2c_func,
+};
+
+int az6027_identify_state(struct usb_device *udev,
+ struct dvb_usb_device_properties *props,
+ struct dvb_usb_device_description **desc,
+ int *cold)
+{
+ u8 b[16];
+ s16 ret = usb_control_msg(udev,
+ usb_rcvctrlpipe(udev, 0),
+ 0xb7,
+ USB_TYPE_VENDOR | USB_DIR_IN,
+ 6,
+ 0,
+ b,
+ 6,
+ USB_CTRL_GET_TIMEOUT);
+
+ *cold = ret <= 0;
+
+ deb_info("cold: %d\n", *cold);
+ return 0;
+}
+
+
+static struct usb_device_id az6027_usb_table[] = {
+ { USB_DEVICE(USB_VID_AZUREWAVE, USB_PID_AZUREWAVE_AZ6027) },
+ { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_DVBS2CI) },
+ { USB_DEVICE(USB_VID_TECHNISAT, USB_PID_TECHNISAT_USB2_HDCI) },
+ { },
+};
+
+MODULE_DEVICE_TABLE(usb, az6027_usb_table);
+
+static struct dvb_usb_device_properties az6027_properties = {
+ .caps = DVB_USB_IS_AN_I2C_ADAPTER,
+ .usb_ctrl = CYPRESS_FX2,
+ .firmware = "dvb-usb-az6027-03.fw",
+ .no_reconnect = 1,
+
+ .size_of_priv = sizeof(struct az6027_device_state),
+ .identify_state = az6027_identify_state,
+ .num_adapters = 1,
+ .adapter = {
+ {
+ .streaming_ctrl = az6027_streaming_ctrl,
+ .frontend_attach = az6027_frontend_attach,
+
+ /* parameter for the MPEG2-data transfer */
+ .stream = {
+ .type = USB_BULK,
+ .count = 10,
+ .endpoint = 0x02,
+ .u = {
+ .bulk = {
+ .buffersize = 4096,
+ }
+ }
+ },
+ }
+ },
+/*
+ .power_ctrl = az6027_power_ctrl,
+ .read_mac_address = az6027_read_mac_addr,
+ */
+ .rc_key_map = az6027_rc_keys,
+ .rc_key_map_size = ARRAY_SIZE(az6027_rc_keys),
+ .rc_interval = 400,
+ .rc_query = az6027_rc_query,
+ .i2c_algo = &az6027_i2c_algo,
+
+ .num_device_descs = 1,
+ .devices = {
+ {
+ .name = "AZUREWAVE DVB-S/S2 USB2.0 (AZ6027)",
+ .cold_ids = { &az6027_usb_table[0], NULL },
+ .warm_ids = { NULL },
+ },
+ { NULL },
+ }
+};
+
+/* usb specific object needed to register this driver with the usb subsystem */
+static struct usb_driver az6027_usb_driver = {
+ .name = "dvb_usb_az6027",
+ .probe = az6027_usb_probe,
+ .disconnect = az6027_usb_disconnect,
+ .id_table = az6027_usb_table,
+};
+
+/* module stuff */
+static int __init az6027_usb_module_init(void)
+{
+ int result;
+
+ result = usb_register(&az6027_usb_driver);
+ if (result) {
+ err("usb_register failed. (%d)", result);
+ return result;
+ }
+
+ return 0;
+}
+
+static void __exit az6027_usb_module_exit(void)
+{
+ /* deregister this driver from the USB subsystem */
+ usb_deregister(&az6027_usb_driver);
+}
+
+module_init(az6027_usb_module_init);
+module_exit(az6027_usb_module_exit);
+
+MODULE_AUTHOR("Adams Xu <Adams.xu@azwave.com.cn>");
+MODULE_DESCRIPTION("Driver for AZUREWAVE DVB-S/S2 USB2.0 (AZ6027)");
+MODULE_VERSION("1.0");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/dvb-usb/az6027.h b/drivers/media/dvb/dvb-usb/az6027.h
new file mode 100644
index 0000000..f3afe17
--- /dev/null
+++ b/drivers/media/dvb/dvb-usb/az6027.h
@@ -0,0 +1,14 @@
+#ifndef _DVB_USB_VP6027_H_
+#define _DVB_USB_VP6027_H_
+
+#define DVB_USB_LOG_PREFIX "az6027"
+#include "dvb-usb.h"
+
+
+extern int dvb_usb_az6027_debug;
+#define deb_info(args...) dprintk(dvb_usb_az6027_debug, 0x01, args)
+#define deb_xfer(args...) dprintk(dvb_usb_az6027_debug, 0x02, args)
+#define deb_rc(args...) dprintk(dvb_usb_az6027_debug, 0x04, args)
+#define deb_fe(args...) dprintk(dvb_usb_az6027_debug, 0x08, args)
+
+#endif
diff --git a/drivers/media/dvb/dvb-usb/cxusb.c b/drivers/media/dvb/dvb-usb/cxusb.c
index 05fb28e9..a7b8405 100644
--- a/drivers/media/dvb/dvb-usb/cxusb.c
+++ b/drivers/media/dvb/dvb-usb/cxusb.c
@@ -1184,6 +1184,9 @@
.osc_clk_freq = 30400, /* in kHz */
.if_freq = 0, /* zero IF */
.zif_swap_iq = 1,
+ .agc_min = 0x2E,
+ .agc_max = 0x90,
+ .agc_hold_loop = 0,
};
static int cxusb_mygica_d689_frontend_attach(struct dvb_usb_adapter *adap)
diff --git a/drivers/media/dvb/dvb-usb/dib0700.h b/drivers/media/dvb/dvb-usb/dib0700.h
index 495a905..83fc24a 100644
--- a/drivers/media/dvb/dvb-usb/dib0700.h
+++ b/drivers/media/dvb/dvb-usb/dib0700.h
@@ -42,7 +42,6 @@
u16 mt2060_if1[2];
u8 rc_toggle;
u8 rc_counter;
- u8 rc_func_version;
u8 is_dib7000pc;
u8 fw_use_new_i2c_api;
u8 disable_streaming_master_mode;
diff --git a/drivers/media/dvb/dvb-usb/dib0700_core.c b/drivers/media/dvb/dvb-usb/dib0700_core.c
index 0d3c9a9..4f961d2d 100644
--- a/drivers/media/dvb/dvb-usb/dib0700_core.c
+++ b/drivers/media/dvb/dvb-usb/dib0700_core.c
@@ -471,14 +471,209 @@
return dib0700_ctrl_wr(adap->dev, b, 4);
}
+/* Number of keypresses to ignore before start repeating */
+#define RC_REPEAT_DELAY_V1_20 10
+
+/* This is the structure of the RC response packet starting in firmware 1.20 */
+struct dib0700_rc_response {
+ u8 report_id;
+ u8 data_state;
+ u16 system;
+ u8 data;
+ u8 not_data;
+};
+#define RC_MSG_SIZE_V1_20 6
+
+static void dib0700_rc_urb_completion(struct urb *purb)
+{
+ struct dvb_usb_device *d = purb->context;
+ struct dvb_usb_rc_key *keymap;
+ struct dib0700_state *st;
+ struct dib0700_rc_response poll_reply;
+ u8 *buf;
+ int found = 0;
+ u32 event;
+ int state;
+ int i;
+
+ deb_info("%s()\n", __func__);
+ if (d == NULL)
+ return;
+
+ if (d->rc_input_dev == NULL) {
+ /* This will occur if disable_rc_polling=1 */
+ usb_free_urb(purb);
+ return;
+ }
+
+ keymap = d->props.rc_key_map;
+ st = d->priv;
+ buf = (u8 *)purb->transfer_buffer;
+
+ if (purb->status < 0) {
+ deb_info("discontinuing polling\n");
+ usb_free_urb(purb);
+ return;
+ }
+
+ if (purb->actual_length != RC_MSG_SIZE_V1_20) {
+ deb_info("malformed rc msg size=%d\n", purb->actual_length);
+ goto resubmit;
+ }
+
+ /* Set initial results in case we exit the function early */
+ event = 0;
+ state = REMOTE_NO_KEY_PRESSED;
+
+ deb_data("IR raw %02X %02X %02X %02X %02X %02X (len %d)\n", buf[0],
+ buf[1], buf[2], buf[3], buf[4], buf[5], purb->actual_length);
+
+ switch (dvb_usb_dib0700_ir_proto) {
+ case 0:
+ /* NEC Protocol */
+ poll_reply.report_id = 0;
+ poll_reply.data_state = 1;
+ poll_reply.system = buf[2];
+ poll_reply.data = buf[4];
+ poll_reply.not_data = buf[5];
+
+ /* NEC protocol sends repeat code as 0 0 0 FF */
+ if ((poll_reply.system == 0x00) && (poll_reply.data == 0x00)
+ && (poll_reply.not_data == 0xff)) {
+ poll_reply.data_state = 2;
+ break;
+ }
+ break;
+ default:
+ /* RC5 Protocol */
+ poll_reply.report_id = buf[0];
+ poll_reply.data_state = buf[1];
+ poll_reply.system = (buf[2] << 8) | buf[3];
+ poll_reply.data = buf[4];
+ poll_reply.not_data = buf[5];
+ break;
+ }
+
+ if ((poll_reply.data + poll_reply.not_data) != 0xff) {
+ /* Key failed integrity check */
+ err("key failed integrity check: %04x %02x %02x",
+ poll_reply.system,
+ poll_reply.data, poll_reply.not_data);
+ goto resubmit;
+ }
+
+ deb_data("rid=%02x ds=%02x sm=%04x d=%02x nd=%02x\n",
+ poll_reply.report_id, poll_reply.data_state,
+ poll_reply.system, poll_reply.data, poll_reply.not_data);
+
+ /* Find the key in the map */
+ for (i = 0; i < d->props.rc_key_map_size; i++) {
+ if (rc5_custom(&keymap[i]) == (poll_reply.system & 0xff) &&
+ rc5_data(&keymap[i]) == poll_reply.data) {
+ event = keymap[i].event;
+ found = 1;
+ break;
+ }
+ }
+
+ if (found == 0) {
+ err("Unknown remote controller key: %04x %02x %02x",
+ poll_reply.system, poll_reply.data, poll_reply.not_data);
+ d->last_event = 0;
+ goto resubmit;
+ }
+
+ if (poll_reply.data_state == 1) {
+ /* New key hit */
+ st->rc_counter = 0;
+ event = keymap[i].event;
+ state = REMOTE_KEY_PRESSED;
+ d->last_event = keymap[i].event;
+ } else if (poll_reply.data_state == 2) {
+ /* Key repeated */
+ st->rc_counter++;
+
+ /* prevents unwanted double hits */
+ if (st->rc_counter > RC_REPEAT_DELAY_V1_20) {
+ event = d->last_event;
+ state = REMOTE_KEY_PRESSED;
+ st->rc_counter = RC_REPEAT_DELAY_V1_20;
+ }
+ } else {
+ err("Unknown data state [%d]", poll_reply.data_state);
+ }
+
+ switch (state) {
+ case REMOTE_NO_KEY_PRESSED:
+ break;
+ case REMOTE_KEY_PRESSED:
+ deb_info("key pressed\n");
+ d->last_event = event;
+ case REMOTE_KEY_REPEAT:
+ deb_info("key repeated\n");
+ input_event(d->rc_input_dev, EV_KEY, event, 1);
+ input_sync(d->rc_input_dev);
+ input_event(d->rc_input_dev, EV_KEY, d->last_event, 0);
+ input_sync(d->rc_input_dev);
+ break;
+ default:
+ break;
+ }
+
+resubmit:
+ /* Clean the buffer before we requeue */
+ memset(purb->transfer_buffer, 0, RC_MSG_SIZE_V1_20);
+
+ /* Requeue URB */
+ usb_submit_urb(purb, GFP_ATOMIC);
+}
+
int dib0700_rc_setup(struct dvb_usb_device *d)
{
+ struct dib0700_state *st = d->priv;
u8 rc_setup[3] = {REQUEST_SET_RC, dvb_usb_dib0700_ir_proto, 0};
- int i = dib0700_ctrl_wr(d, rc_setup, 3);
+ struct urb *purb;
+ int ret;
+ int i;
+
+ if (d->props.rc_key_map == NULL)
+ return 0;
+
+ /* Set the IR mode */
+ i = dib0700_ctrl_wr(d, rc_setup, 3);
if (i<0) {
err("ir protocol setup failed");
return -1;
}
+
+ if (st->fw_version < 0x10200)
+ return 0;
+
+ /* Starting in firmware 1.20, the RC info is provided on a bulk pipe */
+ purb = usb_alloc_urb(0, GFP_KERNEL);
+ if (purb == NULL) {
+ err("rc usb alloc urb failed\n");
+ return -1;
+ }
+
+ purb->transfer_buffer = kzalloc(RC_MSG_SIZE_V1_20, GFP_KERNEL);
+ if (purb->transfer_buffer == NULL) {
+ err("rc kzalloc failed\n");
+ usb_free_urb(purb);
+ return -1;
+ }
+
+ purb->status = -EINPROGRESS;
+ usb_fill_bulk_urb(purb, d->udev, usb_rcvbulkpipe(d->udev, 1),
+ purb->transfer_buffer, RC_MSG_SIZE_V1_20,
+ dib0700_rc_urb_completion, d);
+
+ ret = usb_submit_urb(purb, GFP_ATOMIC);
+ if (ret != 0) {
+ err("rc submit urb failed\n");
+ return -1;
+ }
+
return 0;
}
diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c
index 44972d0..34eab05 100644
--- a/drivers/media/dvb/dvb-usb/dib0700_devices.c
+++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c
@@ -472,20 +472,25 @@
/* Number of keypresses to ignore before start repeating */
#define RC_REPEAT_DELAY 6
-#define RC_REPEAT_DELAY_V1_20 10
-
-
-/* Used by firmware versions < 1.20 (deprecated) */
-static int dib0700_rc_query_legacy(struct dvb_usb_device *d, u32 *event,
- int *state)
+static int dib0700_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
{
u8 key[4];
int i;
struct dvb_usb_rc_key *keymap = d->props.rc_key_map;
struct dib0700_state *st = d->priv;
+
*event = 0;
*state = REMOTE_NO_KEY_PRESSED;
+
+ if (st->fw_version >= 0x10200) {
+ /* For 1.20 firmware , We need to keep the RC polling
+ callback so we can reuse the input device setup in
+ dvb-usb-remote.c. However, the actual work is being done
+ in the bulk URB completion handler. */
+ return 0;
+ }
+
i=dib0700_ctrl_rd(d,rc_request,2,key,4);
if (i<=0) {
err("RC Query Failed");
@@ -557,149 +562,6 @@
return 0;
}
-/* This is the structure of the RC response packet starting in firmware 1.20 */
-struct dib0700_rc_response {
- u8 report_id;
- u8 data_state;
- u16 system;
- u8 data;
- u8 not_data;
-};
-
-/* This supports the new IR response format for firmware v1.20 */
-static int dib0700_rc_query_v1_20(struct dvb_usb_device *d, u32 *event,
- int *state)
-{
- struct dvb_usb_rc_key *keymap = d->props.rc_key_map;
- struct dib0700_state *st = d->priv;
- struct dib0700_rc_response poll_reply;
- u8 buf[6];
- int i;
- int status;
- int actlen;
- int found = 0;
-
- /* Set initial results in case we exit the function early */
- *event = 0;
- *state = REMOTE_NO_KEY_PRESSED;
-
- /* Firmware v1.20 provides RC data via bulk endpoint 1 */
- status = usb_bulk_msg(d->udev, usb_rcvbulkpipe(d->udev, 1), buf,
- sizeof(buf), &actlen, 50);
- if (status < 0) {
- /* No data available (meaning no key press) */
- return 0;
- }
-
-
- switch (dvb_usb_dib0700_ir_proto) {
- case 0:
- poll_reply.report_id = 0;
- poll_reply.data_state = 1;
- poll_reply.system = buf[2];
- poll_reply.data = buf[4];
- poll_reply.not_data = buf[5];
-
- /* NEC protocol sends repeat code as 0 0 0 FF */
- if ((poll_reply.system == 0x00) && (poll_reply.data == 0x00)
- && (poll_reply.not_data == 0xff)) {
- poll_reply.data_state = 2;
- break;
- }
- break;
- default:
- if (actlen != sizeof(buf)) {
- /* We didn't get back the 6 byte message we expected */
- err("Unexpected RC response size [%d]", actlen);
- return -1;
- }
-
- poll_reply.report_id = buf[0];
- poll_reply.data_state = buf[1];
- poll_reply.system = (buf[2] << 8) | buf[3];
- poll_reply.data = buf[4];
- poll_reply.not_data = buf[5];
-
- break;
- }
-
- if ((poll_reply.data + poll_reply.not_data) != 0xff) {
- /* Key failed integrity check */
- err("key failed integrity check: %04x %02x %02x",
- poll_reply.system,
- poll_reply.data, poll_reply.not_data);
- return -1;
- }
-
-
- /* Find the key in the map */
- for (i = 0; i < d->props.rc_key_map_size; i++) {
- if (rc5_custom(&keymap[i]) == (poll_reply.system & 0xff) &&
- rc5_data(&keymap[i]) == poll_reply.data) {
- *event = keymap[i].event;
- found = 1;
- break;
- }
- }
-
- if (found == 0) {
- err("Unknown remote controller key: %04x %02x %02x",
- poll_reply.system,
- poll_reply.data, poll_reply.not_data);
- d->last_event = 0;
- return 0;
- }
-
- if (poll_reply.data_state == 1) {
- /* New key hit */
- st->rc_counter = 0;
- *event = keymap[i].event;
- *state = REMOTE_KEY_PRESSED;
- d->last_event = keymap[i].event;
- } else if (poll_reply.data_state == 2) {
- /* Key repeated */
- st->rc_counter++;
-
- /* prevents unwanted double hits */
- if (st->rc_counter > RC_REPEAT_DELAY_V1_20) {
- *event = d->last_event;
- *state = REMOTE_KEY_PRESSED;
- st->rc_counter = RC_REPEAT_DELAY_V1_20;
- }
- } else {
- err("Unknown data state [%d]", poll_reply.data_state);
- }
-
- return 0;
-}
-
-static int dib0700_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
-{
- struct dib0700_state *st = d->priv;
-
- /* Because some people may have improperly named firmware files,
- let's figure out whether to use the new firmware call or the legacy
- call based on the firmware version embedded in the file */
- if (st->rc_func_version == 0) {
- u32 hwver, romver, ramver, fwtype;
- int ret = dib0700_get_version(d, &hwver, &romver, &ramver,
- &fwtype);
- if (ret < 0) {
- err("Could not determine version info");
- return -1;
- }
- if (ramver < 0x10200)
- st->rc_func_version = 1;
- else
- st->rc_func_version = 2;
- }
-
- if (st->rc_func_version == 2)
- return dib0700_rc_query_v1_20(d, event, state);
- else
- return dib0700_rc_query_legacy(d, event, state);
-}
-
static struct dvb_usb_rc_key dib0700_rc_keys[] = {
/* Key codes for the tiny Pinnacle remote*/
{ 0x0700, KEY_MUTE },
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
index bc3581d..ae8b57a 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
@@ -64,6 +64,8 @@
#define USB_VID_HUMAX_COEX 0x10b9
#define USB_VID_774 0x7a69
#define USB_VID_EVOLUTEPC 0x1e59
+#define USB_VID_AZUREWAVE 0x13d3
+#define USB_VID_TECHNISAT 0x14f7
/* Product IDs */
#define USB_PID_ADSTECH_USB2_COLD 0xa333
@@ -138,6 +140,7 @@
#define USB_PID_TWINHAN_VP7021_COLD 0x3207
#define USB_PID_TWINHAN_VP7021_WARM 0x3208
#define USB_PID_TINYTWIN 0x3226
+#define USB_PID_TINYTWIN_2 0xe402
#define USB_PID_DNTV_TINYUSB2_COLD 0x3223
#define USB_PID_DNTV_TINYUSB2_WARM 0x3224
#define USB_PID_ULTIMA_TVBOX_COLD 0x8105
@@ -209,6 +212,7 @@
#define USB_PID_PINNACLE_PCTV71E 0x022b
#define USB_PID_PINNACLE_PCTV72E 0x0236
#define USB_PID_PINNACLE_PCTV73E 0x0237
+#define USB_PID_PINNACLE_PCTV310E 0x3211
#define USB_PID_PINNACLE_PCTV801E 0x023a
#define USB_PID_PINNACLE_PCTV801E_SE 0x023b
#define USB_PID_PINNACLE_PCTV73A 0x0243
@@ -248,6 +252,7 @@
#define USB_PID_DIGIVOX_MINI_SL_WARM 0xe361
#define USB_PID_GRANDTEC_DVBT_USB2_COLD 0x0bc6
#define USB_PID_GRANDTEC_DVBT_USB2_WARM 0x0bc7
+#define USB_PID_WINFAST_DTV2000DS 0x6a04
#define USB_PID_WINFAST_DTV_DONGLE_COLD 0x6025
#define USB_PID_WINFAST_DTV_DONGLE_WARM 0x6026
#define USB_PID_WINFAST_DTV_DONGLE_STK7700P 0x6f00
@@ -290,5 +295,7 @@
#define USB_PID_FRIIO_WHITE 0x0001
#define USB_PID_TVWAY_PLUS 0x0002
#define USB_PID_SVEON_STV20 0xe39d
-
+#define USB_PID_AZUREWAVE_AZ6027 0x3275
+#define USB_PID_TERRATEC_DVBS2CI 0x3275
+#define USB_PID_TECHNISAT_USB2_HDCI 0x0002
#endif
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-init.c b/drivers/media/dvb/dvb-usb/dvb-usb-init.c
index e331db8..5d91f70 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-init.c
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-init.c
@@ -243,7 +243,7 @@
d = kzalloc(sizeof(struct dvb_usb_device),GFP_KERNEL);
if (d == NULL) {
err("no memory for 'struct dvb_usb_device'");
- return ret;
+ return -ENOMEM;
}
d->udev = udev;
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-remote.c b/drivers/media/dvb/dvb-usb/dvb-usb-remote.c
index 6b5ded9..a03ef7e 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-remote.c
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-remote.c
@@ -107,6 +107,7 @@
case REMOTE_KEY_REPEAT:
deb_rc("key repeated\n");
input_event(d->rc_input_dev, EV_KEY, event, 1);
+ input_sync(d->rc_input_dev);
input_event(d->rc_input_dev, EV_KEY, d->last_event, 0);
input_sync(d->rc_input_dev);
break;
diff --git a/drivers/media/dvb/dvb-usb/dw2102.c b/drivers/media/dvb/dvb-usb/dw2102.c
index 64132c0..accc655 100644
--- a/drivers/media/dvb/dvb-usb/dw2102.c
+++ b/drivers/media/dvb/dvb-usb/dw2102.c
@@ -1,6 +1,7 @@
/* DVB USB framework compliant Linux driver for the
* DVBWorld DVB-S 2101, 2102, DVB-S2 2104, DVB-C 3101,
-* TeVii S600, S630, S650 Cards
+* TeVii S600, S630, S650,
+* Prof 1100, 7500 Cards
* Copyright (C) 2008,2009 Igor M. Liplianin (liplianin@me.by)
*
* This program is free software; you can redistribute it and/or modify it
@@ -469,11 +470,13 @@
int num)
{
struct dvb_usb_device *d = i2c_get_adapdata(adap);
+ struct usb_device *udev;
int ret = 0;
int len, i, j;
if (!d)
return -ENODEV;
+ udev = d->udev;
if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
return -EAGAIN;
@@ -488,8 +491,13 @@
}
case (DW2102_VOLTAGE_CTRL): {
u8 obuf[2];
+
+ obuf[0] = 1;
+ obuf[1] = msg[j].buf[1];/* off-on */
+ ret = dw210x_op_rw(d->udev, 0x8a, 0, 0,
+ obuf, 2, DW210X_WRITE_MSG);
obuf[0] = 3;
- obuf[1] = msg[j].buf[0];
+ obuf[1] = msg[j].buf[0];/* 13v-18v */
ret = dw210x_op_rw(d->udev, 0x8a, 0, 0,
obuf, 2, DW210X_WRITE_MSG);
break;
@@ -527,6 +535,17 @@
i += 16;
len -= 16;
} while (len > 0);
+ } else if ((udev->descriptor.idProduct == 0x7500)
+ && (j < (num - 1))) {
+ /* write register addr before read */
+ u8 obuf[msg[j].len + 2];
+ obuf[0] = msg[j + 1].len;
+ obuf[1] = (msg[j].addr << 1);
+ memcpy(obuf + 2, msg[j].buf, msg[j].len);
+ ret = dw210x_op_rw(d->udev, 0x92, 0, 0,
+ obuf, msg[j].len + 2,
+ DW210X_WRITE_MSG);
+ break;
} else {
/* write registers */
u8 obuf[msg[j].len + 2];
@@ -651,18 +670,25 @@
static int dw210x_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
{
- static u8 command_13v[1] = {0x00};
- static u8 command_18v[1] = {0x01};
- struct i2c_msg msg[] = {
- {.addr = DW2102_VOLTAGE_CTRL, .flags = 0,
- .buf = command_13v, .len = 1},
+ static u8 command_13v[] = {0x00, 0x01};
+ static u8 command_18v[] = {0x01, 0x01};
+ static u8 command_off[] = {0x00, 0x00};
+ struct i2c_msg msg = {
+ .addr = DW2102_VOLTAGE_CTRL,
+ .flags = 0,
+ .buf = command_off,
+ .len = 2,
};
struct dvb_usb_adapter *udev_adap =
(struct dvb_usb_adapter *)(fe->dvb->priv);
if (voltage == SEC_VOLTAGE_18)
- msg[0].buf = command_18v;
- i2c_transfer(&udev_adap->dev->i2c_adap, msg, 1);
+ msg.buf = command_18v;
+ else if (voltage == SEC_VOLTAGE_13)
+ msg.buf = command_13v;
+
+ i2c_transfer(&udev_adap->dev->i2c_adap, &msg, 1);
+
return 0;
}
@@ -735,6 +761,18 @@
.clk_div = 1,
};
+static struct stv0900_config prof_7500_stv0900_config = {
+ .demod_address = 0x6a,
+ .demod_mode = 0,
+ .xtal = 27000000,
+ .clkmode = 3,/* 0-CLKI, 2-XTALI, else AUTO */
+ .diseqc_mode = 2,/* 2/3 PWM */
+ .tun1_maddress = 0,/* 0x60 */
+ .tun1_adc = 0,/* 2 Vpp */
+ .path1_mode = 3,
+ .tun1_type = 3,
+};
+
static int dw2104_frontend_attach(struct dvb_usb_adapter *d)
{
struct dvb_tuner_ops *tuner_ops = NULL;
@@ -882,6 +920,19 @@
return -EIO;
}
+static int prof_7500_frontend_attach(struct dvb_usb_adapter *d)
+{
+ d->fe = dvb_attach(stv0900_attach, &prof_7500_stv0900_config,
+ &d->dev->i2c_adap, 0);
+ if (d->fe == NULL)
+ return -EIO;
+ d->fe->ops.set_voltage = dw210x_set_voltage;
+
+ info("Attached STV0900+STB6100A!\n");
+
+ return 0;
+}
+
static int dw2102_tuner_attach(struct dvb_usb_adapter *adap)
{
dvb_attach(dvb_pll_attach, adap->fe, 0x60,
@@ -1073,6 +1124,7 @@
{USB_DEVICE(0x9022, USB_PID_TEVII_S630)},
{USB_DEVICE(0x3011, USB_PID_PROF_1100)},
{USB_DEVICE(0x9022, USB_PID_TEVII_S660)},
+ {USB_DEVICE(0x3034, 0x7500)},
{ }
};
@@ -1387,9 +1439,30 @@
}
};
+struct dvb_usb_device_properties *p7500;
+static struct dvb_usb_device_description d7500 = {
+ "Prof 7500 USB DVB-S2",
+ {&dw2102_table[9], NULL},
+ {NULL},
+};
+
static int dw2102_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
+
+ p7500 = kzalloc(sizeof(struct dvb_usb_device_properties), GFP_KERNEL);
+ if (!p7500)
+ return -ENOMEM;
+ /* copy default structure */
+ memcpy(p7500, &s6x0_properties,
+ sizeof(struct dvb_usb_device_properties));
+ /* fill only different fields */
+ p7500->firmware = "dvb-usb-p7500.fw";
+ p7500->devices[0] = d7500;
+ p7500->rc_key_map = tbs_rc_keys;
+ p7500->rc_key_map_size = ARRAY_SIZE(tbs_rc_keys);
+ p7500->adapter->frontend_attach = prof_7500_frontend_attach;
+
if (0 == dvb_usb_device_init(intf, &dw2102_properties,
THIS_MODULE, NULL, adapter_nr) ||
0 == dvb_usb_device_init(intf, &dw2104_properties,
@@ -1397,6 +1470,8 @@
0 == dvb_usb_device_init(intf, &dw3101_properties,
THIS_MODULE, NULL, adapter_nr) ||
0 == dvb_usb_device_init(intf, &s6x0_properties,
+ THIS_MODULE, NULL, adapter_nr) ||
+ 0 == dvb_usb_device_init(intf, p7500,
THIS_MODULE, NULL, adapter_nr))
return 0;
@@ -1431,6 +1506,6 @@
MODULE_DESCRIPTION("Driver for DVBWorld DVB-S 2101, 2102, DVB-S2 2104,"
" DVB-C 3101 USB2.0,"
" TeVii S600, S630, S650, S660 USB2.0,"
- " Prof 1100 USB2.0 devices");
+ " Prof 1100, 7500 USB2.0 devices");
MODULE_VERSION("0.1");
MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/dvb-usb/friio-fe.c b/drivers/media/dvb/dvb-usb/friio-fe.c
index ebb7b9f..d14bd22 100644
--- a/drivers/media/dvb/dvb-usb/friio-fe.c
+++ b/drivers/media/dvb/dvb-usb/friio-fe.c
@@ -366,7 +366,7 @@
{0x76, 0x0C},
};
-const static int init_code_len = sizeof(init_code) / sizeof(u8[2]);
+static const int init_code_len = sizeof(init_code) / sizeof(u8[2]);
static int jdvbt90502_init(struct dvb_frontend *fe)
{
diff --git a/drivers/media/dvb/dvb-usb/m920x.c b/drivers/media/dvb/dvb-usb/m920x.c
index ef9b7be..737ffa3 100644
--- a/drivers/media/dvb/dvb-usb/m920x.c
+++ b/drivers/media/dvb/dvb-usb/m920x.c
@@ -16,6 +16,9 @@
#include "qt1010.h"
#include "tda1004x.h"
#include "tda827x.h"
+
+#include <media/tuner.h>
+#include "tuner-simple.h"
#include <asm/unaligned.h>
/* debug */
@@ -158,11 +161,14 @@
case 0x93:
case 0x92:
+ case 0x83: /* pinnacle PCTV310e */
+ case 0x82:
m->rep_count = 0;
*state = REMOTE_KEY_PRESSED;
goto unlock;
case 0x91:
+ case 0x81: /* pinnacle PCTV310e */
/* prevent immediate auto-repeat */
if (++m->rep_count > 2)
*state = REMOTE_KEY_REPEAT;
@@ -546,6 +552,14 @@
return 0;
}
+static int m920x_fmd1216me_tuner_attach(struct dvb_usb_adapter *adap)
+{
+ dvb_attach(simple_tuner_attach, adap->fe,
+ &adap->dev->i2c_adap, 0x61,
+ TUNER_PHILIPS_FMD1216ME_MK3);
+ return 0;
+}
+
/* device-specific initialization */
static struct m920x_inits megasky_rc_init [] = {
{ M9206_RC_INIT2, 0xa8 },
@@ -562,6 +576,18 @@
{ } /* terminating entry */
};
+static struct m920x_inits pinnacle310e_init[] = {
+ /* without these the tuner don't work */
+ { 0xff20, 0x9b },
+ { 0xff22, 0x70 },
+
+ /* rc settings */
+ { 0xff50, 0x80 },
+ { M9206_RC_INIT1, 0x00 },
+ { M9206_RC_INIT2, 0xff },
+ { } /* terminating entry */
+};
+
/* ir keymaps */
static struct dvb_usb_rc_key megasky_rc_keys [] = {
{ 0x0012, KEY_POWER },
@@ -602,11 +628,68 @@
{ 0x001e, KEY_VOLUMEUP },
};
+static struct dvb_usb_rc_key pinnacle310e_rc_keys[] = {
+ { 0x16, KEY_POWER },
+ { 0x17, KEY_FAVORITES },
+ { 0x0f, KEY_TEXT },
+ { 0x48, KEY_MEDIA }, /* preview */
+ { 0x1c, KEY_EPG },
+ { 0x04, KEY_LIST }, /* record list */
+ { 0x03, KEY_1 },
+ { 0x01, KEY_2 },
+ { 0x06, KEY_3 },
+ { 0x09, KEY_4 },
+ { 0x1d, KEY_5 },
+ { 0x1f, KEY_6 },
+ { 0x0d, KEY_7 },
+ { 0x19, KEY_8 },
+ { 0x1b, KEY_9 },
+ { 0x15, KEY_0 },
+ { 0x0c, KEY_CANCEL },
+ { 0x4a, KEY_CLEAR },
+ { 0x13, KEY_BACK },
+ { 0x00, KEY_TAB },
+ { 0x4b, KEY_UP },
+ { 0x4e, KEY_LEFT },
+ { 0x52, KEY_RIGHT },
+ { 0x51, KEY_DOWN },
+ { 0x4f, KEY_ENTER }, /* could also be KEY_OK */
+ { 0x1e, KEY_VOLUMEUP },
+ { 0x0a, KEY_VOLUMEDOWN },
+ { 0x05, KEY_CHANNELUP },
+ { 0x02, KEY_CHANNELDOWN },
+ { 0x11, KEY_RECORD },
+ { 0x14, KEY_PLAY },
+ { 0x4c, KEY_PAUSE },
+ { 0x1a, KEY_STOP },
+ { 0x40, KEY_REWIND },
+ { 0x12, KEY_FASTFORWARD },
+ { 0x41, KEY_PREVIOUSSONG }, /* Replay */
+ { 0x42, KEY_NEXTSONG }, /* Skip */
+ { 0x54, KEY_CAMERA }, /* Capture */
+/* { 0x50, KEY_SAP }, */ /* Sap */
+ { 0x47, KEY_CYCLEWINDOWS }, /* Pip */
+ { 0x4d, KEY_SCREEN }, /* FullScreen */
+ { 0x08, KEY_SUBTITLE },
+ { 0x0e, KEY_MUTE },
+/* { 0x49, KEY_LR }, */ /* L/R */
+ { 0x07, KEY_SLEEP }, /* Hibernate */
+ { 0x08, KEY_MEDIA }, /* A/V */
+ { 0x0e, KEY_MENU }, /* Recall */
+ { 0x45, KEY_ZOOMIN },
+ { 0x46, KEY_ZOOMOUT },
+ { 0x18, KEY_TV }, /* Red */
+ { 0x53, KEY_VCR }, /* Green */
+ { 0x5e, KEY_SAT }, /* Yellow */
+ { 0x5f, KEY_PLAYER }, /* Blue */
+};
+
/* DVB USB Driver stuff */
static struct dvb_usb_device_properties megasky_properties;
static struct dvb_usb_device_properties digivox_mini_ii_properties;
static struct dvb_usb_device_properties tvwalkertwin_properties;
static struct dvb_usb_device_properties dposh_properties;
+static struct dvb_usb_device_properties pinnacle_pctv310e_properties;
static int m920x_probe(struct usb_interface *intf,
const struct usb_device_id *id)
@@ -652,6 +735,13 @@
goto found;
}
+ ret = dvb_usb_device_init(intf, &pinnacle_pctv310e_properties,
+ THIS_MODULE, &d, adapter_nr);
+ if (ret == 0) {
+ rc_init_seq = pinnacle310e_init;
+ goto found;
+ }
+
return ret;
} else {
/* Another interface on a multi-tuner device */
@@ -682,6 +772,7 @@
USB_PID_LIFEVIEW_TV_WALKER_TWIN_WARM) },
{ USB_DEVICE(USB_VID_DPOSH, USB_PID_DPOSH_M9206_COLD) },
{ USB_DEVICE(USB_VID_DPOSH, USB_PID_DPOSH_M9206_WARM) },
+ { USB_DEVICE(USB_VID_VISIONPLUS, USB_PID_PINNACLE_PCTV310E) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE (usb, m920x_table);
@@ -895,6 +986,56 @@
}
};
+static struct dvb_usb_device_properties pinnacle_pctv310e_properties = {
+ .caps = DVB_USB_IS_AN_I2C_ADAPTER,
+
+ .usb_ctrl = DEVICE_SPECIFIC,
+ .download_firmware = NULL,
+
+ .rc_interval = 100,
+ .rc_key_map = pinnacle310e_rc_keys,
+ .rc_key_map_size = ARRAY_SIZE(pinnacle310e_rc_keys),
+ .rc_query = m920x_rc_query,
+
+ .size_of_priv = sizeof(struct m920x_state),
+
+ .identify_state = m920x_identify_state,
+ .num_adapters = 1,
+ .adapter = {{
+ .caps = DVB_USB_ADAP_HAS_PID_FILTER |
+ DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+
+ .pid_filter_count = 8,
+ .pid_filter = m920x_pid_filter,
+ .pid_filter_ctrl = m920x_pid_filter_ctrl,
+
+ .frontend_attach = m920x_mt352_frontend_attach,
+ .tuner_attach = m920x_fmd1216me_tuner_attach,
+
+ .stream = {
+ .type = USB_ISOC,
+ .count = 5,
+ .endpoint = 0x84,
+ .u = {
+ .isoc = {
+ .framesperurb = 128,
+ .framesize = 564,
+ .interval = 1,
+ }
+ }
+ },
+ } },
+ .i2c_algo = &m920x_i2c_algo,
+
+ .num_device_descs = 1,
+ .devices = {
+ { "Pinnacle PCTV 310e",
+ { &m920x_table[6], NULL },
+ { NULL },
+ }
+ }
+};
+
static struct usb_driver m920x_driver = {
.name = "dvb_usb_m920x",
.probe = m920x_probe,
diff --git a/drivers/media/dvb/dvb-usb/m920x.h b/drivers/media/dvb/dvb-usb/m920x.h
index 3753289..3c06151 100644
--- a/drivers/media/dvb/dvb-usb/m920x.h
+++ b/drivers/media/dvb/dvb-usb/m920x.h
@@ -18,7 +18,7 @@
#define M9206_FW 0x30
#define M9206_MAX_FILTERS 8
-#define M9206_MAX_ADAPTERS 2
+#define M9206_MAX_ADAPTERS 4
/*
sequences found in logs:
diff --git a/drivers/media/dvb/dvb-usb/opera1.c b/drivers/media/dvb/dvb-usb/opera1.c
index d4e2309..83055769 100644
--- a/drivers/media/dvb/dvb-usb/opera1.c
+++ b/drivers/media/dvb/dvb-usb/opera1.c
@@ -138,7 +138,7 @@
(msg[i].addr<<1)|(msg[i].flags&I2C_M_RD?0x01:0),
msg[i].buf,
msg[i].len
- )!= msg[i].len)) {
+ )) != msg[i].len) {
break;
}
if (dvb_usb_opera1_debug & 0x10)
diff --git a/drivers/media/dvb/firewire/firedtv-1394.c b/drivers/media/dvb/firewire/firedtv-1394.c
index 7c5459c2..c3e0ec2 100644
--- a/drivers/media/dvb/firewire/firedtv-1394.c
+++ b/drivers/media/dvb/firewire/firedtv-1394.c
@@ -90,13 +90,14 @@
return container_of(fdtv->device, struct unit_directory, device)->ne;
}
-static int node_lock(struct firedtv *fdtv, u64 addr, __be32 data[])
+static int node_lock(struct firedtv *fdtv, u64 addr, void *data)
{
+ quadlet_t *d = data;
int ret;
- ret = hpsb_node_lock(node_of(fdtv), addr, EXTCODE_COMPARE_SWAP,
- (__force quadlet_t *)&data[1], (__force quadlet_t)data[0]);
- data[0] = data[1];
+ ret = hpsb_node_lock(node_of(fdtv), addr,
+ EXTCODE_COMPARE_SWAP, &d[1], d[0]);
+ d[0] = d[1];
return ret;
}
@@ -192,9 +193,13 @@
int kv_len, err;
void *kv_str;
- kv_len = (ud->model_name_kv->value.leaf.len - 2) * sizeof(quadlet_t);
- kv_str = CSR1212_TEXTUAL_DESCRIPTOR_LEAF_DATA(ud->model_name_kv);
-
+ if (ud->model_name_kv) {
+ kv_len = (ud->model_name_kv->value.leaf.len - 2) * 4;
+ kv_str = CSR1212_TEXTUAL_DESCRIPTOR_LEAF_DATA(ud->model_name_kv);
+ } else {
+ kv_len = 0;
+ kv_str = NULL;
+ }
fdtv = fdtv_alloc(dev, &fdtv_1394_backend, kv_str, kv_len);
if (!fdtv)
return -ENOMEM;
diff --git a/drivers/media/dvb/firewire/firedtv-avc.c b/drivers/media/dvb/firewire/firedtv-avc.c
index 50c42a4..1b31beb 100644
--- a/drivers/media/dvb/firewire/firedtv-avc.c
+++ b/drivers/media/dvb/firewire/firedtv-avc.c
@@ -74,7 +74,6 @@
#define EN50221_TAG_CA_INFO 0x9f8031
struct avc_command_frame {
- int length;
u8 ctype;
u8 subunit;
u8 opcode;
@@ -82,13 +81,27 @@
};
struct avc_response_frame {
- int length;
u8 response;
u8 subunit;
u8 opcode;
u8 operand[509];
};
+#define LAST_OPERAND (509 - 1)
+
+static inline void clear_operands(struct avc_command_frame *c, int from, int to)
+{
+ memset(&c->operand[from], 0, to - from + 1);
+}
+
+static void pad_operands(struct avc_command_frame *c, int from)
+{
+ int to = ALIGN(from, 4);
+
+ if (from <= to && to <= LAST_OPERAND)
+ clear_operands(c, from, to);
+}
+
#define AVC_DEBUG_READ_DESCRIPTOR 0x0001
#define AVC_DEBUG_DSIT 0x0002
#define AVC_DEBUG_DSD 0x0004
@@ -202,78 +215,65 @@
16, 1, msg, length, false);
}
-static int __avc_write(struct firedtv *fdtv,
- const struct avc_command_frame *c, struct avc_response_frame *r)
+static int avc_write(struct firedtv *fdtv)
{
int err, retry;
- if (r)
- fdtv->avc_reply_received = false;
+ fdtv->avc_reply_received = false;
for (retry = 0; retry < 6; retry++) {
if (unlikely(avc_debug))
- debug_fcp(&c->ctype, c->length);
+ debug_fcp(fdtv->avc_data, fdtv->avc_data_length);
err = fdtv->backend->write(fdtv, FCP_COMMAND_REGISTER,
- (void *)&c->ctype, c->length);
+ fdtv->avc_data, fdtv->avc_data_length);
if (err) {
- fdtv->avc_reply_received = true;
dev_err(fdtv->device, "FCP command write failed\n");
+
return err;
}
- if (!r)
- return 0;
-
/*
* AV/C specs say that answers should be sent within 150 ms.
* Time out after 200 ms.
*/
if (wait_event_timeout(fdtv->avc_wait,
fdtv->avc_reply_received,
- msecs_to_jiffies(200)) != 0) {
- r->length = fdtv->response_length;
- memcpy(&r->response, fdtv->response, r->length);
-
+ msecs_to_jiffies(200)) != 0)
return 0;
- }
}
dev_err(fdtv->device, "FCP response timed out\n");
+
return -ETIMEDOUT;
}
-static int avc_write(struct firedtv *fdtv,
- const struct avc_command_frame *c, struct avc_response_frame *r)
+static bool is_register_rc(struct avc_response_frame *r)
{
- int ret;
-
- if (mutex_lock_interruptible(&fdtv->avc_mutex))
- return -EINTR;
-
- ret = __avc_write(fdtv, c, r);
-
- mutex_unlock(&fdtv->avc_mutex);
- return ret;
+ return r->opcode == AVC_OPCODE_VENDOR &&
+ r->operand[0] == SFE_VENDOR_DE_COMPANYID_0 &&
+ r->operand[1] == SFE_VENDOR_DE_COMPANYID_1 &&
+ r->operand[2] == SFE_VENDOR_DE_COMPANYID_2 &&
+ r->operand[3] == SFE_VENDOR_OPCODE_REGISTER_REMOTE_CONTROL;
}
int avc_recv(struct firedtv *fdtv, void *data, size_t length)
{
- struct avc_response_frame *r =
- data - offsetof(struct avc_response_frame, response);
+ struct avc_response_frame *r = data;
if (unlikely(avc_debug))
debug_fcp(data, length);
- if (length >= 8 &&
- r->operand[0] == SFE_VENDOR_DE_COMPANYID_0 &&
- r->operand[1] == SFE_VENDOR_DE_COMPANYID_1 &&
- r->operand[2] == SFE_VENDOR_DE_COMPANYID_2 &&
- r->operand[3] == SFE_VENDOR_OPCODE_REGISTER_REMOTE_CONTROL) {
- if (r->response == AVC_RESPONSE_CHANGED) {
- fdtv_handle_rc(fdtv,
- r->operand[4] << 8 | r->operand[5]);
+ if (length >= 8 && is_register_rc(r)) {
+ switch (r->response) {
+ case AVC_RESPONSE_CHANGED:
+ fdtv_handle_rc(fdtv, r->operand[4] << 8 | r->operand[5]);
schedule_work(&fdtv->remote_ctrl_work);
- } else if (r->response != AVC_RESPONSE_INTERIM) {
+ break;
+ case AVC_RESPONSE_INTERIM:
+ if (is_register_rc((void *)fdtv->avc_data))
+ goto wake;
+ break;
+ default:
dev_info(fdtv->device,
"remote control result = %d\n", r->response);
}
@@ -285,9 +285,9 @@
return -EIO;
}
- memcpy(fdtv->response, data, length);
- fdtv->response_length = length;
-
+ memcpy(fdtv->avc_data, data, length);
+ fdtv->avc_data_length = length;
+wake:
fdtv->avc_reply_received = true;
wake_up(&fdtv->avc_wait);
@@ -318,10 +318,11 @@
* tuning command for setting the relative LNB frequency
* (not supported by the AVC standard)
*/
-static void avc_tuner_tuneqpsk(struct firedtv *fdtv,
- struct dvb_frontend_parameters *params,
- struct avc_command_frame *c)
+static int avc_tuner_tuneqpsk(struct firedtv *fdtv,
+ struct dvb_frontend_parameters *params)
{
+ struct avc_command_frame *c = (void *)fdtv->avc_data;
+
c->opcode = AVC_OPCODE_VENDOR;
c->operand[0] = SFE_VENDOR_DE_COMPANYID_0;
@@ -370,16 +371,18 @@
c->operand[13] = 0x1;
c->operand[14] = 0xff;
c->operand[15] = 0xff;
- c->length = 20;
+
+ return 16;
} else {
- c->length = 16;
+ return 13;
}
}
-static void avc_tuner_dsd_dvb_c(struct firedtv *fdtv,
- struct dvb_frontend_parameters *params,
- struct avc_command_frame *c)
+static int avc_tuner_dsd_dvb_c(struct firedtv *fdtv,
+ struct dvb_frontend_parameters *params)
{
+ struct avc_command_frame *c = (void *)fdtv->avc_data;
+
c->opcode = AVC_OPCODE_DSD;
c->operand[0] = 0; /* source plug */
@@ -440,15 +443,14 @@
c->operand[20] = 0x00;
c->operand[21] = 0x00;
- /* Add PIDs to filter */
- c->length = ALIGN(22 + add_pid_filter(fdtv, &c->operand[22]) + 3, 4);
+ return 22 + add_pid_filter(fdtv, &c->operand[22]);
}
-static void avc_tuner_dsd_dvb_t(struct firedtv *fdtv,
- struct dvb_frontend_parameters *params,
- struct avc_command_frame *c)
+static int avc_tuner_dsd_dvb_t(struct firedtv *fdtv,
+ struct dvb_frontend_parameters *params)
{
struct dvb_ofdm_parameters *ofdm = ¶ms->u.ofdm;
+ struct avc_command_frame *c = (void *)fdtv->avc_data;
c->opcode = AVC_OPCODE_DSD;
@@ -543,55 +545,58 @@
c->operand[15] = 0x00; /* network_ID[0] */
c->operand[16] = 0x00; /* network_ID[1] */
- /* Add PIDs to filter */
- c->length = ALIGN(17 + add_pid_filter(fdtv, &c->operand[17]) + 3, 4);
+ return 17 + add_pid_filter(fdtv, &c->operand[17]);
}
int avc_tuner_dsd(struct firedtv *fdtv,
struct dvb_frontend_parameters *params)
{
- char buffer[sizeof(struct avc_command_frame)];
- struct avc_command_frame *c = (void *)buffer;
- struct avc_response_frame *r = (void *)buffer; /* FIXME: unused */
+ struct avc_command_frame *c = (void *)fdtv->avc_data;
+ int pos, ret;
- memset(c, 0, sizeof(*c));
+ mutex_lock(&fdtv->avc_mutex);
c->ctype = AVC_CTYPE_CONTROL;
c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
switch (fdtv->type) {
case FIREDTV_DVB_S:
- case FIREDTV_DVB_S2: avc_tuner_tuneqpsk(fdtv, params, c); break;
- case FIREDTV_DVB_C: avc_tuner_dsd_dvb_c(fdtv, params, c); break;
- case FIREDTV_DVB_T: avc_tuner_dsd_dvb_t(fdtv, params, c); break;
+ case FIREDTV_DVB_S2: pos = avc_tuner_tuneqpsk(fdtv, params); break;
+ case FIREDTV_DVB_C: pos = avc_tuner_dsd_dvb_c(fdtv, params); break;
+ case FIREDTV_DVB_T: pos = avc_tuner_dsd_dvb_t(fdtv, params); break;
default:
BUG();
}
+ pad_operands(c, pos);
- if (avc_write(fdtv, c, r) < 0)
- return -EIO;
-
- msleep(500);
+ fdtv->avc_data_length = ALIGN(3 + pos, 4);
+ ret = avc_write(fdtv);
#if 0
- /* FIXME: */
- /* u8 *status was an out-parameter of avc_tuner_dsd, unused by caller */
+ /*
+ * FIXME:
+ * u8 *status was an out-parameter of avc_tuner_dsd, unused by caller.
+ * Check for AVC_RESPONSE_ACCEPTED here instead?
+ */
if (status)
*status = r->operand[2];
#endif
- return 0;
+ mutex_unlock(&fdtv->avc_mutex);
+
+ if (ret == 0)
+ msleep(500);
+
+ return ret;
}
int avc_tuner_set_pids(struct firedtv *fdtv, unsigned char pidc, u16 pid[])
{
- char buffer[sizeof(struct avc_command_frame)];
- struct avc_command_frame *c = (void *)buffer;
- struct avc_response_frame *r = (void *)buffer; /* FIXME: unused */
- int pos, k;
+ struct avc_command_frame *c = (void *)fdtv->avc_data;
+ int ret, pos, k;
if (pidc > 16 && pidc != 0xff)
return -EINVAL;
- memset(c, 0, sizeof(*c));
+ mutex_lock(&fdtv->avc_mutex);
c->ctype = AVC_CTYPE_CONTROL;
c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
@@ -614,24 +619,27 @@
c->operand[pos++] = 0x00; /* tableID */
c->operand[pos++] = 0x00; /* filter_length */
}
+ pad_operands(c, pos);
- c->length = ALIGN(3 + pos, 4);
+ fdtv->avc_data_length = ALIGN(3 + pos, 4);
+ ret = avc_write(fdtv);
- if (avc_write(fdtv, c, r) < 0)
- return -EIO;
+ /* FIXME: check response code? */
- msleep(50);
- return 0;
+ mutex_unlock(&fdtv->avc_mutex);
+
+ if (ret == 0)
+ msleep(50);
+
+ return ret;
}
int avc_tuner_get_ts(struct firedtv *fdtv)
{
- char buffer[sizeof(struct avc_command_frame)];
- struct avc_command_frame *c = (void *)buffer;
- struct avc_response_frame *r = (void *)buffer; /* FIXME: unused */
- int sl;
+ struct avc_command_frame *c = (void *)fdtv->avc_data;
+ int ret, sl;
- memset(c, 0, sizeof(*c));
+ mutex_lock(&fdtv->avc_mutex);
c->ctype = AVC_CTYPE_CONTROL;
c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
@@ -646,26 +654,33 @@
c->operand[4] = 0x00; /* antenna number */
c->operand[5] = 0x0; /* system_specific_search_flags */
c->operand[6] = sl; /* system_specific_multiplex selection_length */
- c->operand[7] = 0x00; /* valid_flags [0] */
- c->operand[8] = 0x00; /* valid_flags [1] */
- c->operand[7 + sl] = 0x00; /* nr_of_dsit_sel_specs (always 0) */
+ /*
+ * operand[7]: valid_flags[0]
+ * operand[8]: valid_flags[1]
+ * operand[7 + sl]: nr_of_dsit_sel_specs (always 0)
+ */
+ clear_operands(c, 7, 24);
- c->length = fdtv->type == FIREDTV_DVB_T ? 24 : 28;
+ fdtv->avc_data_length = fdtv->type == FIREDTV_DVB_T ? 24 : 28;
+ ret = avc_write(fdtv);
- if (avc_write(fdtv, c, r) < 0)
- return -EIO;
+ /* FIXME: check response code? */
- msleep(250);
- return 0;
+ mutex_unlock(&fdtv->avc_mutex);
+
+ if (ret == 0)
+ msleep(250);
+
+ return ret;
}
int avc_identify_subunit(struct firedtv *fdtv)
{
- char buffer[sizeof(struct avc_command_frame)];
- struct avc_command_frame *c = (void *)buffer;
- struct avc_response_frame *r = (void *)buffer;
+ struct avc_command_frame *c = (void *)fdtv->avc_data;
+ struct avc_response_frame *r = (void *)fdtv->avc_data;
+ int ret;
- memset(c, 0, sizeof(*c));
+ mutex_lock(&fdtv->avc_mutex);
c->ctype = AVC_CTYPE_CONTROL;
c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
@@ -678,31 +693,34 @@
c->operand[4] = 0x08; /* length lowbyte */
c->operand[5] = 0x00; /* offset highbyte */
c->operand[6] = 0x0d; /* offset lowbyte */
+ clear_operands(c, 7, 8); /* padding */
- c->length = 12;
-
- if (avc_write(fdtv, c, r) < 0)
- return -EIO;
+ fdtv->avc_data_length = 12;
+ ret = avc_write(fdtv);
+ if (ret < 0)
+ goto out;
if ((r->response != AVC_RESPONSE_STABLE &&
r->response != AVC_RESPONSE_ACCEPTED) ||
(r->operand[3] << 8) + r->operand[4] != 8) {
dev_err(fdtv->device, "cannot read subunit identifier\n");
- return -EINVAL;
+ ret = -EINVAL;
}
- return 0;
+out:
+ mutex_unlock(&fdtv->avc_mutex);
+
+ return ret;
}
#define SIZEOF_ANTENNA_INPUT_INFO 22
int avc_tuner_status(struct firedtv *fdtv, struct firedtv_tuner_status *stat)
{
- char buffer[sizeof(struct avc_command_frame)];
- struct avc_command_frame *c = (void *)buffer;
- struct avc_response_frame *r = (void *)buffer;
- int length;
+ struct avc_command_frame *c = (void *)fdtv->avc_data;
+ struct avc_response_frame *r = (void *)fdtv->avc_data;
+ int length, ret;
- memset(c, 0, sizeof(*c));
+ mutex_lock(&fdtv->avc_mutex);
c->ctype = AVC_CTYPE_CONTROL;
c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
@@ -710,27 +728,30 @@
c->operand[0] = DESCRIPTOR_TUNER_STATUS;
c->operand[1] = 0xff; /* read_result_status */
- c->operand[2] = 0x00; /* reserved */
- c->operand[3] = 0; /* SIZEOF_ANTENNA_INPUT_INFO >> 8; */
- c->operand[4] = 0; /* SIZEOF_ANTENNA_INPUT_INFO & 0xff; */
- c->operand[5] = 0x00;
- c->operand[6] = 0x00;
+ /*
+ * operand[2]: reserved
+ * operand[3]: SIZEOF_ANTENNA_INPUT_INFO >> 8
+ * operand[4]: SIZEOF_ANTENNA_INPUT_INFO & 0xff
+ */
+ clear_operands(c, 2, 31);
- c->length = 12;
-
- if (avc_write(fdtv, c, r) < 0)
- return -EIO;
+ fdtv->avc_data_length = 12;
+ ret = avc_write(fdtv);
+ if (ret < 0)
+ goto out;
if (r->response != AVC_RESPONSE_STABLE &&
r->response != AVC_RESPONSE_ACCEPTED) {
dev_err(fdtv->device, "cannot read tuner status\n");
- return -EINVAL;
+ ret = -EINVAL;
+ goto out;
}
length = r->operand[9];
if (r->operand[1] != 0x10 || length != SIZEOF_ANTENNA_INPUT_INFO) {
dev_err(fdtv->device, "got invalid tuner status\n");
- return -EINVAL;
+ ret = -EINVAL;
+ goto out;
}
stat->active_system = r->operand[10];
@@ -766,20 +787,21 @@
stat->ca_dvb_flag = r->operand[31] >> 3 & 1;
stat->ca_error_flag = r->operand[31] >> 2 & 1;
stat->ca_initialization_status = r->operand[31] >> 1 & 1;
+out:
+ mutex_unlock(&fdtv->avc_mutex);
- return 0;
+ return ret;
}
int avc_lnb_control(struct firedtv *fdtv, char voltage, char burst,
char conttone, char nrdiseq,
struct dvb_diseqc_master_cmd *diseqcmd)
{
- char buffer[sizeof(struct avc_command_frame)];
- struct avc_command_frame *c = (void *)buffer;
- struct avc_response_frame *r = (void *)buffer;
- int i, j, k;
+ struct avc_command_frame *c = (void *)fdtv->avc_data;
+ struct avc_response_frame *r = (void *)fdtv->avc_data;
+ int pos, j, k, ret;
- memset(c, 0, sizeof(*c));
+ mutex_lock(&fdtv->avc_mutex);
c->ctype = AVC_CTYPE_CONTROL;
c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
@@ -789,41 +811,41 @@
c->operand[1] = SFE_VENDOR_DE_COMPANYID_1;
c->operand[2] = SFE_VENDOR_DE_COMPANYID_2;
c->operand[3] = SFE_VENDOR_OPCODE_LNB_CONTROL;
-
c->operand[4] = voltage;
c->operand[5] = nrdiseq;
- i = 6;
-
+ pos = 6;
for (j = 0; j < nrdiseq; j++) {
- c->operand[i++] = diseqcmd[j].msg_len;
+ c->operand[pos++] = diseqcmd[j].msg_len;
for (k = 0; k < diseqcmd[j].msg_len; k++)
- c->operand[i++] = diseqcmd[j].msg[k];
+ c->operand[pos++] = diseqcmd[j].msg[k];
}
+ c->operand[pos++] = burst;
+ c->operand[pos++] = conttone;
+ pad_operands(c, pos);
- c->operand[i++] = burst;
- c->operand[i++] = conttone;
-
- c->length = ALIGN(3 + i, 4);
-
- if (avc_write(fdtv, c, r) < 0)
- return -EIO;
+ fdtv->avc_data_length = ALIGN(3 + pos, 4);
+ ret = avc_write(fdtv);
+ if (ret < 0)
+ goto out;
if (r->response != AVC_RESPONSE_ACCEPTED) {
dev_err(fdtv->device, "LNB control failed\n");
- return -EINVAL;
+ ret = -EINVAL;
}
+out:
+ mutex_unlock(&fdtv->avc_mutex);
- return 0;
+ return ret;
}
int avc_register_remote_control(struct firedtv *fdtv)
{
- char buffer[sizeof(struct avc_command_frame)];
- struct avc_command_frame *c = (void *)buffer;
+ struct avc_command_frame *c = (void *)fdtv->avc_data;
+ int ret;
- memset(c, 0, sizeof(*c));
+ mutex_lock(&fdtv->avc_mutex);
c->ctype = AVC_CTYPE_NOTIFY;
c->subunit = AVC_SUBUNIT_TYPE_UNIT | 7;
@@ -833,10 +855,16 @@
c->operand[1] = SFE_VENDOR_DE_COMPANYID_1;
c->operand[2] = SFE_VENDOR_DE_COMPANYID_2;
c->operand[3] = SFE_VENDOR_OPCODE_REGISTER_REMOTE_CONTROL;
+ c->operand[4] = 0; /* padding */
- c->length = 8;
+ fdtv->avc_data_length = 8;
+ ret = avc_write(fdtv);
- return avc_write(fdtv, c, NULL);
+ /* FIXME: check response code? */
+
+ mutex_unlock(&fdtv->avc_mutex);
+
+ return ret;
}
void avc_remote_ctrl_work(struct work_struct *work)
@@ -851,11 +879,10 @@
#if 0 /* FIXME: unused */
int avc_tuner_host2ca(struct firedtv *fdtv)
{
- char buffer[sizeof(struct avc_command_frame)];
- struct avc_command_frame *c = (void *)buffer;
- struct avc_response_frame *r = (void *)buffer; /* FIXME: unused */
+ struct avc_command_frame *c = (void *)fdtv->avc_data;
+ int ret;
- memset(c, 0, sizeof(*c));
+ mutex_lock(&fdtv->avc_mutex);
c->ctype = AVC_CTYPE_CONTROL;
c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
@@ -867,15 +894,16 @@
c->operand[3] = SFE_VENDOR_OPCODE_HOST2CA;
c->operand[4] = 0; /* slot */
c->operand[5] = SFE_VENDOR_TAG_CA_APPLICATION_INFO; /* ca tag */
- c->operand[6] = 0; /* more/last */
- c->operand[7] = 0; /* length */
+ clear_operands(c, 6, 8);
- c->length = 12;
+ fdtv->avc_data_length = 12;
+ ret = avc_write(fdtv);
- if (avc_write(fdtv, c, r) < 0)
- return -EIO;
+ /* FIXME: check response code? */
- return 0;
+ mutex_unlock(&fdtv->avc_mutex);
+
+ return ret;
}
#endif
@@ -906,12 +934,11 @@
int avc_ca_app_info(struct firedtv *fdtv, char *app_info, unsigned int *len)
{
- char buffer[sizeof(struct avc_command_frame)];
- struct avc_command_frame *c = (void *)buffer;
- struct avc_response_frame *r = (void *)buffer;
- int pos;
+ struct avc_command_frame *c = (void *)fdtv->avc_data;
+ struct avc_response_frame *r = (void *)fdtv->avc_data;
+ int pos, ret;
- memset(c, 0, sizeof(*c));
+ mutex_lock(&fdtv->avc_mutex);
c->ctype = AVC_CTYPE_STATUS;
c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
@@ -923,11 +950,12 @@
c->operand[3] = SFE_VENDOR_OPCODE_CA2HOST;
c->operand[4] = 0; /* slot */
c->operand[5] = SFE_VENDOR_TAG_CA_APPLICATION_INFO; /* ca tag */
+ clear_operands(c, 6, LAST_OPERAND);
- c->length = 12;
-
- if (avc_write(fdtv, c, r) < 0)
- return -EIO;
+ fdtv->avc_data_length = 12;
+ ret = avc_write(fdtv);
+ if (ret < 0)
+ goto out;
/* FIXME: check response code and validate response data */
@@ -939,18 +967,19 @@
app_info[4] = 0x01;
memcpy(&app_info[5], &r->operand[pos], 5 + r->operand[pos + 4]);
*len = app_info[3] + 4;
+out:
+ mutex_unlock(&fdtv->avc_mutex);
- return 0;
+ return ret;
}
int avc_ca_info(struct firedtv *fdtv, char *app_info, unsigned int *len)
{
- char buffer[sizeof(struct avc_command_frame)];
- struct avc_command_frame *c = (void *)buffer;
- struct avc_response_frame *r = (void *)buffer;
- int pos;
+ struct avc_command_frame *c = (void *)fdtv->avc_data;
+ struct avc_response_frame *r = (void *)fdtv->avc_data;
+ int pos, ret;
- memset(c, 0, sizeof(*c));
+ mutex_lock(&fdtv->avc_mutex);
c->ctype = AVC_CTYPE_STATUS;
c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
@@ -962,11 +991,14 @@
c->operand[3] = SFE_VENDOR_OPCODE_CA2HOST;
c->operand[4] = 0; /* slot */
c->operand[5] = SFE_VENDOR_TAG_CA_APPLICATION_INFO; /* ca tag */
+ clear_operands(c, 6, LAST_OPERAND);
- c->length = 12;
+ fdtv->avc_data_length = 12;
+ ret = avc_write(fdtv);
+ if (ret < 0)
+ goto out;
- if (avc_write(fdtv, c, r) < 0)
- return -EIO;
+ /* FIXME: check response code and validate response data */
pos = get_ca_object_pos(r);
app_info[0] = (EN50221_TAG_CA_INFO >> 16) & 0xff;
@@ -976,17 +1008,18 @@
app_info[4] = r->operand[pos + 0];
app_info[5] = r->operand[pos + 1];
*len = app_info[3] + 4;
+out:
+ mutex_unlock(&fdtv->avc_mutex);
- return 0;
+ return ret;
}
int avc_ca_reset(struct firedtv *fdtv)
{
- char buffer[sizeof(struct avc_command_frame)];
- struct avc_command_frame *c = (void *)buffer;
- struct avc_response_frame *r = (void *)buffer; /* FIXME: unused */
+ struct avc_command_frame *c = (void *)fdtv->avc_data;
+ int ret;
- memset(c, 0, sizeof(*c));
+ mutex_lock(&fdtv->avc_mutex);
c->ctype = AVC_CTYPE_CONTROL;
c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
@@ -1002,19 +1035,20 @@
c->operand[7] = 1; /* length */
c->operand[8] = 0; /* force hardware reset */
- c->length = 12;
+ fdtv->avc_data_length = 12;
+ ret = avc_write(fdtv);
- if (avc_write(fdtv, c, r) < 0)
- return -EIO;
+ /* FIXME: check response code? */
- return 0;
+ mutex_unlock(&fdtv->avc_mutex);
+
+ return ret;
}
int avc_ca_pmt(struct firedtv *fdtv, char *msg, int length)
{
- char buffer[sizeof(struct avc_command_frame)];
- struct avc_command_frame *c = (void *)buffer;
- struct avc_response_frame *r = (void *)buffer;
+ struct avc_command_frame *c = (void *)fdtv->avc_data;
+ struct avc_response_frame *r = (void *)fdtv->avc_data;
int list_management;
int program_info_length;
int pmt_cmd_id;
@@ -1022,11 +1056,12 @@
int write_pos;
int es_info_length;
int crc32_csum;
+ int ret;
if (unlikely(avc_debug & AVC_DEBUG_APPLICATION_PMT))
debug_pmt(msg, length);
- memset(c, 0, sizeof(*c));
+ mutex_lock(&fdtv->avc_mutex);
c->ctype = AVC_CTYPE_CONTROL;
c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
@@ -1058,7 +1093,7 @@
c->operand[12] = 0x02; /* Table id=2 */
c->operand[13] = 0x80; /* Section syntax + length */
- /* c->operand[14] = XXXprogram_info_length + 12; */
+
c->operand[15] = msg[1]; /* Program number */
c->operand[16] = msg[2];
c->operand[17] = 0x01; /* Version number=0 + current/next=1 */
@@ -1106,12 +1141,7 @@
write_pos += es_info_length;
}
}
-
- /* CRC */
- c->operand[write_pos++] = 0x00;
- c->operand[write_pos++] = 0x00;
- c->operand[write_pos++] = 0x00;
- c->operand[write_pos++] = 0x00;
+ write_pos += 4; /* CRC */
c->operand[7] = 0x82;
c->operand[8] = (write_pos - 10) >> 8;
@@ -1123,28 +1153,31 @@
c->operand[write_pos - 3] = (crc32_csum >> 16) & 0xff;
c->operand[write_pos - 2] = (crc32_csum >> 8) & 0xff;
c->operand[write_pos - 1] = (crc32_csum >> 0) & 0xff;
+ pad_operands(c, write_pos);
- c->length = ALIGN(3 + write_pos, 4);
-
- if (avc_write(fdtv, c, r) < 0)
- return -EIO;
+ fdtv->avc_data_length = ALIGN(3 + write_pos, 4);
+ ret = avc_write(fdtv);
+ if (ret < 0)
+ goto out;
if (r->response != AVC_RESPONSE_ACCEPTED) {
dev_err(fdtv->device,
"CA PMT failed with response 0x%x\n", r->response);
- return -EFAULT;
+ ret = -EFAULT;
}
+out:
+ mutex_unlock(&fdtv->avc_mutex);
- return 0;
+ return ret;
}
int avc_ca_get_time_date(struct firedtv *fdtv, int *interval)
{
- char buffer[sizeof(struct avc_command_frame)];
- struct avc_command_frame *c = (void *)buffer;
- struct avc_response_frame *r = (void *)buffer;
+ struct avc_command_frame *c = (void *)fdtv->avc_data;
+ struct avc_response_frame *r = (void *)fdtv->avc_data;
+ int ret;
- memset(c, 0, sizeof(*c));
+ mutex_lock(&fdtv->avc_mutex);
c->ctype = AVC_CTYPE_STATUS;
c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
@@ -1156,28 +1189,28 @@
c->operand[3] = SFE_VENDOR_OPCODE_CA2HOST;
c->operand[4] = 0; /* slot */
c->operand[5] = SFE_VENDOR_TAG_CA_DATE_TIME; /* ca tag */
- c->operand[6] = 0; /* more/last */
- c->operand[7] = 0; /* length */
+ clear_operands(c, 6, LAST_OPERAND);
- c->length = 12;
-
- if (avc_write(fdtv, c, r) < 0)
- return -EIO;
+ fdtv->avc_data_length = 12;
+ ret = avc_write(fdtv);
+ if (ret < 0)
+ goto out;
/* FIXME: check response code and validate response data */
*interval = r->operand[get_ca_object_pos(r)];
+out:
+ mutex_unlock(&fdtv->avc_mutex);
- return 0;
+ return ret;
}
int avc_ca_enter_menu(struct firedtv *fdtv)
{
- char buffer[sizeof(struct avc_command_frame)];
- struct avc_command_frame *c = (void *)buffer;
- struct avc_response_frame *r = (void *)buffer; /* FIXME: unused */
+ struct avc_command_frame *c = (void *)fdtv->avc_data;
+ int ret;
- memset(c, 0, sizeof(*c));
+ mutex_lock(&fdtv->avc_mutex);
c->ctype = AVC_CTYPE_STATUS;
c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
@@ -1189,24 +1222,25 @@
c->operand[3] = SFE_VENDOR_OPCODE_HOST2CA;
c->operand[4] = 0; /* slot */
c->operand[5] = SFE_VENDOR_TAG_CA_ENTER_MENU;
- c->operand[6] = 0; /* more/last */
- c->operand[7] = 0; /* length */
+ clear_operands(c, 6, 8);
- c->length = 12;
+ fdtv->avc_data_length = 12;
+ ret = avc_write(fdtv);
- if (avc_write(fdtv, c, r) < 0)
- return -EIO;
+ /* FIXME: check response code? */
- return 0;
+ mutex_unlock(&fdtv->avc_mutex);
+
+ return ret;
}
int avc_ca_get_mmi(struct firedtv *fdtv, char *mmi_object, unsigned int *len)
{
- char buffer[sizeof(struct avc_command_frame)];
- struct avc_command_frame *c = (void *)buffer;
- struct avc_response_frame *r = (void *)buffer;
+ struct avc_command_frame *c = (void *)fdtv->avc_data;
+ struct avc_response_frame *r = (void *)fdtv->avc_data;
+ int ret;
- memset(c, 0, sizeof(*c));
+ mutex_lock(&fdtv->avc_mutex);
c->ctype = AVC_CTYPE_STATUS;
c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
@@ -1218,20 +1252,21 @@
c->operand[3] = SFE_VENDOR_OPCODE_CA2HOST;
c->operand[4] = 0; /* slot */
c->operand[5] = SFE_VENDOR_TAG_CA_MMI;
- c->operand[6] = 0; /* more/last */
- c->operand[7] = 0; /* length */
+ clear_operands(c, 6, LAST_OPERAND);
- c->length = 12;
-
- if (avc_write(fdtv, c, r) < 0)
- return -EIO;
+ fdtv->avc_data_length = 12;
+ ret = avc_write(fdtv);
+ if (ret < 0)
+ goto out;
/* FIXME: check response code and validate response data */
*len = get_ca_object_length(r);
memcpy(mmi_object, &r->operand[get_ca_object_pos(r)], *len);
+out:
+ mutex_unlock(&fdtv->avc_mutex);
- return 0;
+ return ret;
}
#define CMP_OUTPUT_PLUG_CONTROL_REG_0 0xfffff0000904ULL
@@ -1240,14 +1275,14 @@
{
int ret;
- if (mutex_lock_interruptible(&fdtv->avc_mutex))
- return -EINTR;
+ mutex_lock(&fdtv->avc_mutex);
ret = fdtv->backend->read(fdtv, addr, data);
if (ret < 0)
dev_err(fdtv->device, "CMP: read I/O error\n");
mutex_unlock(&fdtv->avc_mutex);
+
return ret;
}
@@ -1255,14 +1290,19 @@
{
int ret;
- if (mutex_lock_interruptible(&fdtv->avc_mutex))
- return -EINTR;
+ mutex_lock(&fdtv->avc_mutex);
- ret = fdtv->backend->lock(fdtv, addr, data);
+ /* data[] is stack-allocated and should not be DMA-mapped. */
+ memcpy(fdtv->avc_data, data, 8);
+
+ ret = fdtv->backend->lock(fdtv, addr, fdtv->avc_data);
if (ret < 0)
dev_err(fdtv->device, "CMP: lock I/O error\n");
+ else
+ memcpy(data, fdtv->avc_data, 8);
mutex_unlock(&fdtv->avc_mutex);
+
return ret;
}
diff --git a/drivers/media/dvb/firewire/firedtv-dvb.c b/drivers/media/dvb/firewire/firedtv-dvb.c
index fc9996c..079e8c5 100644
--- a/drivers/media/dvb/firewire/firedtv-dvb.c
+++ b/drivers/media/dvb/firewire/firedtv-dvb.c
@@ -277,7 +277,6 @@
mutex_init(&fdtv->avc_mutex);
init_waitqueue_head(&fdtv->avc_wait);
- fdtv->avc_reply_received = true;
mutex_init(&fdtv->demux_mutex);
INIT_WORK(&fdtv->remote_ctrl_work, avc_remote_ctrl_work);
diff --git a/drivers/media/dvb/firewire/firedtv-fw.c b/drivers/media/dvb/firewire/firedtv-fw.c
index 6223bf0..7a3de16 100644
--- a/drivers/media/dvb/firewire/firedtv-fw.c
+++ b/drivers/media/dvb/firewire/firedtv-fw.c
@@ -41,7 +41,7 @@
return rcode != RCODE_COMPLETE ? -EIO : 0;
}
-static int node_lock(struct firedtv *fdtv, u64 addr, __be32 data[])
+static int node_lock(struct firedtv *fdtv, u64 addr, void *data)
{
return node_req(fdtv, addr, data, 8, TCODE_LOCK_COMPARE_SWAP);
}
diff --git a/drivers/media/dvb/firewire/firedtv.h b/drivers/media/dvb/firewire/firedtv.h
index 35080db..78cc28f 100644
--- a/drivers/media/dvb/firewire/firedtv.h
+++ b/drivers/media/dvb/firewire/firedtv.h
@@ -73,7 +73,7 @@
struct firedtv;
struct firedtv_backend {
- int (*lock)(struct firedtv *fdtv, u64 addr, __be32 data[]);
+ int (*lock)(struct firedtv *fdtv, u64 addr, void *data);
int (*read)(struct firedtv *fdtv, u64 addr, void *data);
int (*write)(struct firedtv *fdtv, u64 addr, void *data, size_t len);
int (*start_iso)(struct firedtv *fdtv);
@@ -114,8 +114,8 @@
unsigned long channel_active;
u16 channel_pid[16];
- size_t response_length;
- u8 response[512];
+ int avc_data_length;
+ u8 avc_data[512];
};
/* firedtv-1394.c */
diff --git a/drivers/media/dvb/frontends/af9013.h b/drivers/media/dvb/frontends/af9013.h
index 28b90c9..e90fa92 100644
--- a/drivers/media/dvb/frontends/af9013.h
+++ b/drivers/media/dvb/frontends/af9013.h
@@ -44,6 +44,7 @@
AF9013_TUNER_MT2060_2 = 147, /* Microtune */
AF9013_TUNER_TDA18271 = 156, /* NXP */
AF9013_TUNER_QT1010A = 162, /* Quantek */
+ AF9013_TUNER_TDA18218 = 179, /* NXP */
};
/* AF9013/5 GPIOs (mostly guessed)
diff --git a/drivers/media/dvb/frontends/atbm8830.c b/drivers/media/dvb/frontends/atbm8830.c
index 59881a5..43aac2f 100644
--- a/drivers/media/dvb/frontends/atbm8830.c
+++ b/drivers/media/dvb/frontends/atbm8830.c
@@ -170,6 +170,19 @@
return 0;
}
+static int set_agc_config(struct atbm_state *priv,
+ u8 min, u8 max, u8 hold_loop)
+{
+ /* no effect if both min and max are zero */
+ if (!min && !max)
+ return 0;
+
+ atbm8830_write_reg(priv, REG_AGC_MIN, min);
+ atbm8830_write_reg(priv, REG_AGC_MAX, max);
+ atbm8830_write_reg(priv, REG_AGC_HOLD_LOOP, hold_loop);
+
+ return 0;
+}
static int set_static_channel_mode(struct atbm_state *priv)
{
@@ -227,6 +240,9 @@
/*Set IF frequency*/
set_if_freq(priv, cfg->if_freq);
+ /*Set AGC Config*/
+ set_agc_config(priv, cfg->agc_min, cfg->agc_max,
+ cfg->agc_hold_loop);
/*Set static channel mode*/
set_static_channel_mode(priv);
diff --git a/drivers/media/dvb/frontends/dib0090.c b/drivers/media/dvb/frontends/dib0090.c
index 6145527..7eac178 100644
--- a/drivers/media/dvb/frontends/dib0090.c
+++ b/drivers/media/dvb/frontends/dib0090.c
@@ -283,7 +283,7 @@
return 0;
}
-extern void dib0090_dcc_freq(struct dvb_frontend *fe, u8 fast)
+void dib0090_dcc_freq(struct dvb_frontend *fe, u8 fast)
{
struct dib0090_state *state = fe->tuner_priv;
if (fast)
diff --git a/drivers/media/dvb/frontends/dib8000.c b/drivers/media/dvb/frontends/dib8000.c
index 6f6fa29..2aa97dd6 100644
--- a/drivers/media/dvb/frontends/dib8000.c
+++ b/drivers/media/dvb/frontends/dib8000.c
@@ -1999,6 +1999,8 @@
struct dib8000_state *state = fe->demodulator_priv;
int time, ret;
+ fe->dtv_property_cache.delivery_system = SYS_ISDBT;
+
dib8000_set_output_mode(state, OUTMODE_HIGH_Z);
if (fe->ops.tuner_ops.set_params)
diff --git a/drivers/media/dvb/frontends/dibx000_common.c b/drivers/media/dvb/frontends/dibx000_common.c
index e6f3d73..980e02f 100644
--- a/drivers/media/dvb/frontends/dibx000_common.c
+++ b/drivers/media/dvb/frontends/dibx000_common.c
@@ -174,7 +174,7 @@
EXPORT_SYMBOL(dibx000_exit_i2c_master);
-u32 systime()
+u32 systime(void)
{
struct timespec t;
diff --git a/drivers/media/dvb/frontends/lnbp21.c b/drivers/media/dvb/frontends/lnbp21.c
index b181bf0..13437259 100644
--- a/drivers/media/dvb/frontends/lnbp21.c
+++ b/drivers/media/dvb/frontends/lnbp21.c
@@ -158,7 +158,8 @@
/* override frontend ops */
fe->ops.set_voltage = lnbp21_set_voltage;
fe->ops.enable_high_lnb_voltage = lnbp21_enable_high_lnb_voltage;
- fe->ops.set_tone = lnbp21_set_tone;
+ if (!(override_clear & LNBH24_TEN)) /*22kHz logic controlled by demod*/
+ fe->ops.set_tone = lnbp21_set_tone;
printk(KERN_INFO "LNBx2x attached on addr=%x\n", lnbp21->i2c_addr);
return fe;
diff --git a/drivers/media/dvb/frontends/si21xx.c b/drivers/media/dvb/frontends/si21xx.c
index 9552a22..d21a327 100644
--- a/drivers/media/dvb/frontends/si21xx.c
+++ b/drivers/media/dvb/frontends/si21xx.c
@@ -97,8 +97,6 @@
#define LNB_SUPPLY_CTRL_REG_4 0xce
#define LNB_SUPPLY_STATUS_REG 0xcf
-#define FALSE 0
-#define TRUE 1
#define FAIL -1
#define PASS 0
@@ -718,7 +716,7 @@
int fine_tune_freq;
unsigned char sample_rate = 0;
/* boolean */
- unsigned int inband_interferer_ind;
+ bool inband_interferer_ind;
/* INTERMEDIATE VALUES */
int icoarse_tune_freq; /* MHz */
@@ -728,15 +726,8 @@
unsigned int x1;
unsigned int x2;
int i;
- unsigned int inband_interferer_div2[ALLOWABLE_FS_COUNT] = {
- FALSE, FALSE, FALSE, FALSE, FALSE,
- FALSE, FALSE, FALSE, FALSE, FALSE
- };
- unsigned int inband_interferer_div4[ALLOWABLE_FS_COUNT] = {
- FALSE, FALSE, FALSE, FALSE, FALSE,
- FALSE, FALSE, FALSE, FALSE, FALSE
- };
-
+ bool inband_interferer_div2[ALLOWABLE_FS_COUNT];
+ bool inband_interferer_div4[ALLOWABLE_FS_COUNT];
int status;
/* allowable sample rates for ADC in MHz */
@@ -762,7 +753,7 @@
}
for (i = 0; i < ALLOWABLE_FS_COUNT; ++i)
- inband_interferer_div2[i] = inband_interferer_div4[i] = FALSE;
+ inband_interferer_div2[i] = inband_interferer_div4[i] = false;
if_limit_high = -700000;
if_limit_low = -100000;
@@ -798,7 +789,7 @@
if (((band_low < x1) && (x1 < band_high)) ||
((band_low < x2) && (x2 < band_high)))
- inband_interferer_div4[i] = TRUE;
+ inband_interferer_div4[i] = true;
}
@@ -811,25 +802,28 @@
if (((band_low < x1) && (x1 < band_high)) ||
((band_low < x2) && (x2 < band_high)))
- inband_interferer_div2[i] = TRUE;
+ inband_interferer_div2[i] = true;
}
- inband_interferer_ind = TRUE;
- for (i = 0; i < ALLOWABLE_FS_COUNT; ++i)
- inband_interferer_ind &= inband_interferer_div2[i] |
- inband_interferer_div4[i];
+ inband_interferer_ind = true;
+ for (i = 0; i < ALLOWABLE_FS_COUNT; ++i) {
+ if (inband_interferer_div2[i] || inband_interferer_div4[i]) {
+ inband_interferer_ind = false;
+ break;
+ }
+ }
if (inband_interferer_ind) {
for (i = 0; i < ALLOWABLE_FS_COUNT; ++i) {
- if (inband_interferer_div2[i] == FALSE) {
+ if (!inband_interferer_div2[i]) {
sample_rate = (u8) afs[i];
break;
}
}
} else {
for (i = 0; i < ALLOWABLE_FS_COUNT; ++i) {
- if ((inband_interferer_div2[i] |
- inband_interferer_div4[i]) == FALSE) {
+ if ((inband_interferer_div2[i] ||
+ !inband_interferer_div4[i])) {
sample_rate = (u8) afs[i];
break;
}
diff --git a/drivers/media/dvb/frontends/stv0900.h b/drivers/media/dvb/frontends/stv0900.h
index 29c3fa8..e3e35d1 100644
--- a/drivers/media/dvb/frontends/stv0900.h
+++ b/drivers/media/dvb/frontends/stv0900.h
@@ -49,6 +49,8 @@
u8 tun2_maddress;
u8 tun1_adc;/* 1 for stv6110, 2 for stb6100 */
u8 tun2_adc;
+ u8 tun1_type;/* for now 3 for stb6100 auto, else - software */
+ u8 tun2_type;
/* Set device param to start dma */
int (*set_ts_params)(struct dvb_frontend *fe, int is_punctured);
};
diff --git a/drivers/media/dvb/frontends/stv0900_core.c b/drivers/media/dvb/frontends/stv0900_core.c
index 8762c86..01f8f1f 100644
--- a/drivers/media/dvb/frontends/stv0900_core.c
+++ b/drivers/media/dvb/frontends/stv0900_core.c
@@ -177,7 +177,7 @@
return buf;
}
-void extract_mask_pos(u32 label, u8 *mask, u8 *pos)
+static void extract_mask_pos(u32 label, u8 *mask, u8 *pos)
{
u8 position = 0, i = 0;
@@ -218,7 +218,7 @@
return val;
}
-enum fe_stv0900_error stv0900_initialize(struct stv0900_internal *intp)
+static enum fe_stv0900_error stv0900_initialize(struct stv0900_internal *intp)
{
s32 i;
@@ -282,7 +282,7 @@
return STV0900_NO_ERROR;
}
-u32 stv0900_get_mclk_freq(struct stv0900_internal *intp, u32 ext_clk)
+static u32 stv0900_get_mclk_freq(struct stv0900_internal *intp, u32 ext_clk)
{
u32 mclk = 90000000, div = 0, ad_div = 0;
@@ -296,7 +296,7 @@
return mclk;
}
-enum fe_stv0900_error stv0900_set_mclk(struct stv0900_internal *intp, u32 mclk)
+static enum fe_stv0900_error stv0900_set_mclk(struct stv0900_internal *intp, u32 mclk)
{
u32 m_div, clk_sel;
@@ -334,7 +334,7 @@
return STV0900_NO_ERROR;
}
-u32 stv0900_get_err_count(struct stv0900_internal *intp, int cntr,
+static u32 stv0900_get_err_count(struct stv0900_internal *intp, int cntr,
enum fe_stv0900_demod_num demod)
{
u32 lsb, msb, hsb, err_val;
@@ -567,6 +567,46 @@
}
}
+u32 stv0900_get_freq_auto(struct stv0900_internal *intp, int demod)
+{
+ u32 freq, round;
+ /* Formulat :
+ Tuner_Frequency(MHz) = Regs / 64
+ Tuner_granularity(MHz) = Regs / 2048
+ real_Tuner_Frequency = Tuner_Frequency(MHz) - Tuner_granularity(MHz)
+ */
+ freq = (stv0900_get_bits(intp, TUN_RFFREQ2) << 10) +
+ (stv0900_get_bits(intp, TUN_RFFREQ1) << 2) +
+ stv0900_get_bits(intp, TUN_RFFREQ0);
+
+ freq = (freq * 1000) / 64;
+
+ round = (stv0900_get_bits(intp, TUN_RFRESTE1) >> 2) +
+ stv0900_get_bits(intp, TUN_RFRESTE0);
+
+ round = (round * 1000) / 2048;
+
+ return freq + round;
+}
+
+void stv0900_set_tuner_auto(struct stv0900_internal *intp, u32 Frequency,
+ u32 Bandwidth, int demod)
+{
+ u32 tunerFrequency;
+ /* Formulat:
+ Tuner_frequency_reg= Frequency(MHz)*64
+ */
+ tunerFrequency = (Frequency * 64) / 1000;
+
+ stv0900_write_bits(intp, TUN_RFFREQ2, (tunerFrequency >> 10));
+ stv0900_write_bits(intp, TUN_RFFREQ1, (tunerFrequency >> 2) & 0xff);
+ stv0900_write_bits(intp, TUN_RFFREQ0, (tunerFrequency & 0x03));
+ /* Low Pass Filter = BW /2 (MHz)*/
+ stv0900_write_bits(intp, TUN_BW, Bandwidth / 2000000);
+ /* Tuner Write trig */
+ stv0900_write_reg(intp, TNRLD, 1);
+}
+
static s32 stv0900_get_rf_level(struct stv0900_internal *intp,
const struct stv0900_table *lookup,
enum fe_stv0900_demod_num demod)
@@ -1329,7 +1369,6 @@
enum fe_stv0900_error error = STV0900_NO_ERROR;
enum fe_stv0900_error demodError = STV0900_NO_ERROR;
struct stv0900_internal *intp = NULL;
-
int selosci, i;
struct stv0900_inode *temp_int = find_inode(state->i2c_adap,
@@ -1345,7 +1384,14 @@
} else {
state->internal = kmalloc(sizeof(struct stv0900_internal),
GFP_KERNEL);
+ if (state->internal == NULL)
+ return STV0900_INVALID_HANDLE;
temp_int = append_internal(state->internal);
+ if (temp_int == NULL) {
+ kfree(state->internal);
+ state->internal = NULL;
+ return STV0900_INVALID_HANDLE;
+ }
state->internal->dmds_used = 1;
state->internal->i2c_adap = state->i2c_adap;
state->internal->i2c_addr = state->config->demod_address;
@@ -1371,11 +1417,6 @@
return error;
}
- if (state->internal == NULL) {
- error = STV0900_INVALID_HANDLE;
- return error;
- }
-
intp = state->internal;
intp->demod_mode = p_init->demod_mode;
@@ -1404,6 +1445,27 @@
stv0900_write_bits(intp, F0900_P1_RST_HWARE, 0);
}
+ intp->tuner_type[0] = p_init->tuner1_type;
+ intp->tuner_type[1] = p_init->tuner2_type;
+ /* tuner init */
+ switch (p_init->tuner1_type) {
+ case 3: /*FE_AUTO_STB6100:*/
+ stv0900_write_reg(intp, R0900_P1_TNRCFG, 0x3c);
+ stv0900_write_reg(intp, R0900_P1_TNRCFG2, 0x86);
+ stv0900_write_reg(intp, R0900_P1_TNRCFG3, 0x18);
+ stv0900_write_reg(intp, R0900_P1_TNRXTAL, 27); /* 27MHz */
+ stv0900_write_reg(intp, R0900_P1_TNRSTEPS, 0x05);
+ stv0900_write_reg(intp, R0900_P1_TNRGAIN, 0x17);
+ stv0900_write_reg(intp, R0900_P1_TNRADJ, 0x1f);
+ stv0900_write_reg(intp, R0900_P1_TNRCTL2, 0x0);
+ stv0900_write_bits(intp, F0900_P1_TUN_TYPE, 3);
+ break;
+ /* case FE_SW_TUNER: */
+ default:
+ stv0900_write_bits(intp, F0900_P1_TUN_TYPE, 6);
+ break;
+ }
+
stv0900_write_bits(intp, F0900_P1_TUN_MADDRESS, p_init->tun1_maddress);
switch (p_init->tuner1_adc) {
case 1:
@@ -1413,6 +1475,27 @@
break;
}
+ stv0900_write_reg(intp, R0900_P1_TNRLD, 1); /* hw tuner */
+
+ /* tuner init */
+ switch (p_init->tuner2_type) {
+ case 3: /*FE_AUTO_STB6100:*/
+ stv0900_write_reg(intp, R0900_P2_TNRCFG, 0x3c);
+ stv0900_write_reg(intp, R0900_P2_TNRCFG2, 0x86);
+ stv0900_write_reg(intp, R0900_P2_TNRCFG3, 0x18);
+ stv0900_write_reg(intp, R0900_P2_TNRXTAL, 27); /* 27MHz */
+ stv0900_write_reg(intp, R0900_P2_TNRSTEPS, 0x05);
+ stv0900_write_reg(intp, R0900_P2_TNRGAIN, 0x17);
+ stv0900_write_reg(intp, R0900_P2_TNRADJ, 0x1f);
+ stv0900_write_reg(intp, R0900_P2_TNRCTL2, 0x0);
+ stv0900_write_bits(intp, F0900_P2_TUN_TYPE, 3);
+ break;
+ /* case FE_SW_TUNER: */
+ default:
+ stv0900_write_bits(intp, F0900_P2_TUN_TYPE, 6);
+ break;
+ }
+
stv0900_write_bits(intp, F0900_P2_TUN_MADDRESS, p_init->tun2_maddress);
switch (p_init->tuner2_adc) {
case 1:
@@ -1422,6 +1505,8 @@
break;
}
+ stv0900_write_reg(intp, R0900_P2_TNRLD, 1); /* hw tuner */
+
stv0900_write_bits(intp, F0900_P1_TUN_IQSWAP, p_init->tun1_iq_inv);
stv0900_write_bits(intp, F0900_P2_TUN_IQSWAP, p_init->tun2_iq_inv);
stv0900_set_mclk(intp, 135000000);
@@ -1824,10 +1909,12 @@
init_params.tun1_maddress = config->tun1_maddress;
init_params.tun1_iq_inv = STV0900_IQ_NORMAL;
init_params.tuner1_adc = config->tun1_adc;
+ init_params.tuner1_type = config->tun1_type;
init_params.path2_ts_clock = config->path2_mode;
init_params.ts_config = config->ts_config_regs;
init_params.tun2_maddress = config->tun2_maddress;
init_params.tuner2_adc = config->tun2_adc;
+ init_params.tuner2_type = config->tun2_type;
init_params.tun2_iq_inv = STV0900_IQ_SWAPPED;
err_stv0900 = stv0900_init_internal(&state->frontend,
diff --git a/drivers/media/dvb/frontends/stv0900_priv.h b/drivers/media/dvb/frontends/stv0900_priv.h
index d8ba8a9..b62b0f0 100644
--- a/drivers/media/dvb/frontends/stv0900_priv.h
+++ b/drivers/media/dvb/frontends/stv0900_priv.h
@@ -247,6 +247,7 @@
u8 tun1_maddress;
int tuner1_adc;
+ int tuner1_type;
/* IQ from the tuner1 to the demod */
enum stv0900_iq_inversion tun1_iq_inv;
@@ -254,6 +255,7 @@
u8 tun2_maddress;
int tuner2_adc;
+ int tuner2_type;
/* IQ from the tuner2 to the demod */
enum stv0900_iq_inversion tun2_iq_inv;
@@ -309,6 +311,8 @@
s32 bw[2];
s32 symbol_rate[2];
s32 srch_range[2];
+ /* for software/auto tuner */
+ int tuner_type[2];
/* algorithm for search Blind, Cold or Warm*/
enum fe_stv0900_search_algo srch_algo[2];
@@ -394,4 +398,11 @@
fe_stv0900_tracking_standard stv0900_get_standard(struct dvb_frontend *fe,
enum fe_stv0900_demod_num demod);
+extern u32
+stv0900_get_freq_auto(struct stv0900_internal *intp, int demod);
+
+extern void
+stv0900_set_tuner_auto(struct stv0900_internal *intp, u32 Frequency,
+ u32 Bandwidth, int demod);
+
#endif
diff --git a/drivers/media/dvb/frontends/stv0900_reg.h b/drivers/media/dvb/frontends/stv0900_reg.h
index 7b8edf1..731afe9 100644
--- a/drivers/media/dvb/frontends/stv0900_reg.h
+++ b/drivers/media/dvb/frontends/stv0900_reg.h
@@ -3174,17 +3174,21 @@
#define R0900_P1_TNRRF1 0xf4e9
#define TNRRF1 REGx(R0900_P1_TNRRF1)
#define F0900_P1_TUN_RFFREQ2 0xf4e900ff
+#define TUN_RFFREQ2 FLDx(F0900_P1_TUN_RFFREQ2)
/*P1_TNRRF0*/
#define R0900_P1_TNRRF0 0xf4ea
#define TNRRF0 REGx(R0900_P1_TNRRF0)
#define F0900_P1_TUN_RFFREQ1 0xf4ea00ff
+#define TUN_RFFREQ1 FLDx(F0900_P1_TUN_RFFREQ1)
/*P1_TNRBW*/
#define R0900_P1_TNRBW 0xf4eb
#define TNRBW REGx(R0900_P1_TNRBW)
#define F0900_P1_TUN_RFFREQ0 0xf4eb00c0
+#define TUN_RFFREQ0 FLDx(F0900_P1_TUN_RFFREQ0)
#define F0900_P1_TUN_BW 0xf4eb003f
+#define TUN_BW FLDx(F0900_P1_TUN_BW)
/*P1_TNRADJ*/
#define R0900_P1_TNRADJ 0xf4ec
@@ -3234,11 +3238,13 @@
#define F0900_P1_TUN_I2CLOCKED 0xf4f60010
#define F0900_P1_TUN_PROGDONE 0xf4f6000c
#define F0900_P1_TUN_RFRESTE1 0xf4f60003
+#define TUN_RFRESTE1 FLDx(F0900_P1_TUN_RFRESTE1)
/*P1_TNRRESTE*/
#define R0900_P1_TNRRESTE 0xf4f7
#define TNRRESTE REGx(R0900_P1_TNRRESTE)
#define F0900_P1_TUN_RFRESTE0 0xf4f700ff
+#define TUN_RFRESTE0 FLDx(F0900_P1_TUN_RFRESTE0)
/*P1_SMAPCOEF7*/
#define R0900_P1_SMAPCOEF7 0xf500
diff --git a/drivers/media/dvb/frontends/stv0900_sw.c b/drivers/media/dvb/frontends/stv0900_sw.c
index b8da87f..ba0709b 100644
--- a/drivers/media/dvb/frontends/stv0900_sw.c
+++ b/drivers/media/dvb/frontends/stv0900_sw.c
@@ -193,7 +193,7 @@
return lock;
}
-int stv0900_sw_algo(struct stv0900_internal *intp,
+static int stv0900_sw_algo(struct stv0900_internal *intp,
enum fe_stv0900_demod_num demod)
{
int lock = FALSE,
@@ -606,7 +606,12 @@
tuner_freq -= (current_step * currier_step);
if (intp->chip_id <= 0x20) {
- stv0900_set_tuner(fe, tuner_freq, intp->bw[d]);
+ if (intp->tuner_type[d] == 3)
+ stv0900_set_tuner_auto(intp, tuner_freq,
+ intp->bw[d], demod);
+ else
+ stv0900_set_tuner(fe, tuner_freq, intp->bw[d]);
+
stv0900_write_reg(intp, DMDISTATE, 0x1c);
stv0900_write_reg(intp, CFRINIT1, 0);
stv0900_write_reg(intp, CFRINIT0, 0);
@@ -790,7 +795,7 @@
return prate;
}
-void stv0900_set_dvbs1_track_car_loop(struct stv0900_internal *intp,
+static void stv0900_set_dvbs1_track_car_loop(struct stv0900_internal *intp,
enum fe_stv0900_demod_num demod,
u32 srate)
{
@@ -976,8 +981,16 @@
intp->rolloff) + 10000000;
if ((intp->chip_id >= 0x20) || (blind_tun_sw == 1)) {
- if (intp->srch_algo[demod] != STV0900_WARM_START)
- stv0900_set_bandwidth(fe, intp->bw[demod]);
+ if (intp->srch_algo[demod] != STV0900_WARM_START) {
+ if (intp->tuner_type[demod] == 3)
+ stv0900_set_tuner_auto(intp,
+ intp->freq[demod],
+ intp->bw[demod],
+ demod);
+ else
+ stv0900_set_bandwidth(fe,
+ intp->bw[demod]);
+ }
}
if ((intp->srch_algo[demod] == STV0900_BLIND_SEARCH) ||
@@ -1202,7 +1215,11 @@
}
result->standard = stv0900_get_standard(fe, d);
- result->frequency = stv0900_get_tuner_freq(fe);
+ if (intp->tuner_type[demod] == 3)
+ result->frequency = stv0900_get_freq_auto(intp, d);
+ else
+ result->frequency = stv0900_get_tuner_freq(fe);
+
offsetFreq = stv0900_get_carr_freq(intp, intp->mclk, d) / 1000;
result->frequency += offsetFreq;
result->symbol_rate = stv0900_get_symbol_rate(intp, intp->mclk, d);
@@ -1213,6 +1230,9 @@
result->pilot = stv0900_get_bits(intp, DEMOD_TYPE) & 0x01;
result->frame_len = ((u32)stv0900_get_bits(intp, DEMOD_TYPE)) >> 1;
result->rolloff = stv0900_get_bits(intp, ROLLOFF_STATUS);
+
+ dprintk("%s: modcode=0x%x \n", __func__, result->modcode);
+
switch (result->standard) {
case STV0900_DVBS2_STANDARD:
result->spectrum = stv0900_get_bits(intp, SPECINV_DEMOD);
@@ -1239,7 +1259,11 @@
if ((intp->srch_algo[d] == STV0900_BLIND_SEARCH) ||
(intp->symbol_rate[d] < 10000000)) {
offsetFreq = result->frequency - intp->freq[d];
- intp->freq[d] = stv0900_get_tuner_freq(fe);
+ if (intp->tuner_type[demod] == 3)
+ intp->freq[d] = stv0900_get_freq_auto(intp, d);
+ else
+ intp->freq[d] = stv0900_get_tuner_freq(fe);
+
if (ABS(offsetFreq) <= ((intp->srch_range[d] / 2000) + 500))
range = STV0900_RANGEOK;
else if (ABS(offsetFreq) <=
@@ -1481,7 +1505,12 @@
else
tuner_freq -= (current_step * currier_step);
- stv0900_set_tuner(fe, tuner_freq, intp->bw[demod]);
+ if (intp->tuner_type[demod] == 3)
+ stv0900_set_tuner_auto(intp, tuner_freq,
+ intp->bw[demod], demod);
+ else
+ stv0900_set_tuner(fe, tuner_freq,
+ intp->bw[demod]);
}
}
@@ -1608,7 +1637,8 @@
agc2_int = stv0900_blind_check_agc2_min_level(intp, demod);
- if (agc2_int > STV0900_BLIND_SEARCH_AGC2_TH)
+ dprintk("%s agc2_int=%d agc2_th=%d \n", __func__, agc2_int, agc2_th);
+ if (agc2_int > agc2_th)
return FALSE;
if (intp->chip_id == 0x10)
@@ -1875,7 +1905,11 @@
}
- stv0900_set_tuner(fe, intp->freq[demod], intp->bw[demod]);
+ if (intp->tuner_type[demod] == 3)
+ stv0900_set_tuner_auto(intp, intp->freq[demod],
+ intp->bw[demod], demod);
+ else
+ stv0900_set_tuner(fe, intp->freq[demod], intp->bw[demod]);
agc1_power = MAKEWORD(stv0900_get_bits(intp, AGCIQ_VALUE1),
stv0900_get_bits(intp, AGCIQ_VALUE0));
diff --git a/drivers/media/dvb/frontends/stv090x.c b/drivers/media/dvb/frontends/stv090x.c
index 1573466..c52c335 100644
--- a/drivers/media/dvb/frontends/stv090x.c
+++ b/drivers/media/dvb/frontends/stv090x.c
@@ -37,7 +37,82 @@
static unsigned int verbose;
module_param(verbose, int, 0644);
-struct mutex demod_lock;
+/* internal params node */
+struct stv090x_dev {
+ /* pointer for internal params, one for each pair of demods */
+ struct stv090x_internal *internal;
+ struct stv090x_dev *next_dev;
+};
+
+/* first internal params */
+static struct stv090x_dev *stv090x_first_dev;
+
+/* find chip by i2c adapter and i2c address */
+static struct stv090x_dev *find_dev(struct i2c_adapter *i2c_adap,
+ u8 i2c_addr)
+{
+ struct stv090x_dev *temp_dev = stv090x_first_dev;
+
+ /*
+ Search of the last stv0900 chip or
+ find it by i2c adapter and i2c address */
+ while ((temp_dev != NULL) &&
+ ((temp_dev->internal->i2c_adap != i2c_adap) ||
+ (temp_dev->internal->i2c_addr != i2c_addr))) {
+
+ temp_dev = temp_dev->next_dev;
+ }
+
+ return temp_dev;
+}
+
+/* deallocating chip */
+static void remove_dev(struct stv090x_internal *internal)
+{
+ struct stv090x_dev *prev_dev = stv090x_first_dev;
+ struct stv090x_dev *del_dev = find_dev(internal->i2c_adap,
+ internal->i2c_addr);
+
+ if (del_dev != NULL) {
+ if (del_dev == stv090x_first_dev) {
+ stv090x_first_dev = del_dev->next_dev;
+ } else {
+ while (prev_dev->next_dev != del_dev)
+ prev_dev = prev_dev->next_dev;
+
+ prev_dev->next_dev = del_dev->next_dev;
+ }
+
+ kfree(del_dev);
+ }
+}
+
+/* allocating new chip */
+static struct stv090x_dev *append_internal(struct stv090x_internal *internal)
+{
+ struct stv090x_dev *new_dev;
+ struct stv090x_dev *temp_dev;
+
+ new_dev = kmalloc(sizeof(struct stv090x_dev), GFP_KERNEL);
+ if (new_dev != NULL) {
+ new_dev->internal = internal;
+ new_dev->next_dev = NULL;
+
+ /* append to list */
+ if (stv090x_first_dev == NULL) {
+ stv090x_first_dev = new_dev;
+ } else {
+ temp_dev = stv090x_first_dev;
+ while (temp_dev->next_dev != NULL)
+ temp_dev = temp_dev->next_dev;
+
+ temp_dev->next_dev = new_dev;
+ }
+ }
+
+ return new_dev;
+}
+
/* DVBS1 and DSS C/N Lookup table */
static const struct stv090x_tab stv090x_s1cn_tab[] = {
@@ -683,6 +758,9 @@
struct stv090x_state *state = fe->demodulator_priv;
u32 reg;
+ if (enable)
+ mutex_lock(&state->internal->tuner_lock);
+
reg = STV090x_READ_DEMOD(state, I2CRPT);
if (enable) {
dprintk(FE_DEBUG, 1, "Enable Gate");
@@ -696,9 +774,14 @@
if ((STV090x_WRITE_DEMOD(state, I2CRPT, reg)) < 0)
goto err;
}
+
+ if (!enable)
+ mutex_unlock(&state->internal->tuner_lock);
+
return 0;
err:
dprintk(FE_ERROR, 1, "I/O error");
+ mutex_unlock(&state->internal->tuner_lock);
return -1;
}
@@ -755,13 +838,13 @@
if (srate > 60000000) {
sym = (srate << 4); /* SR * 2^16 / master_clk */
- sym /= (state->mclk >> 12);
+ sym /= (state->internal->mclk >> 12);
} else if (srate > 6000000) {
sym = (srate << 6);
- sym /= (state->mclk >> 10);
+ sym /= (state->internal->mclk >> 10);
} else {
sym = (srate << 9);
- sym /= (state->mclk >> 7);
+ sym /= (state->internal->mclk >> 7);
}
if (STV090x_WRITE_DEMOD(state, SFRINIT1, (sym >> 8) & 0x7f) < 0) /* MSB */
@@ -782,13 +865,13 @@
srate = 105 * (srate / 100);
if (srate > 60000000) {
sym = (srate << 4); /* SR * 2^16 / master_clk */
- sym /= (state->mclk >> 12);
+ sym /= (state->internal->mclk >> 12);
} else if (srate > 6000000) {
sym = (srate << 6);
- sym /= (state->mclk >> 10);
+ sym /= (state->internal->mclk >> 10);
} else {
sym = (srate << 9);
- sym /= (state->mclk >> 7);
+ sym /= (state->internal->mclk >> 7);
}
if (sym < 0x7fff) {
@@ -816,13 +899,13 @@
srate = 95 * (srate / 100);
if (srate > 60000000) {
sym = (srate << 4); /* SR * 2^16 / master_clk */
- sym /= (state->mclk >> 12);
+ sym /= (state->internal->mclk >> 12);
} else if (srate > 6000000) {
sym = (srate << 6);
- sym /= (state->mclk >> 10);
+ sym /= (state->internal->mclk >> 10);
} else {
sym = (srate << 9);
- sym /= (state->mclk >> 7);
+ sym /= (state->internal->mclk >> 7);
}
if (STV090x_WRITE_DEMOD(state, SFRLOW1, ((sym >> 8) & 0x7f)) < 0) /* MSB */
@@ -1103,21 +1186,21 @@
switch (state->demod) {
case STV090x_DEMODULATOR_0:
- mutex_lock(&demod_lock);
+ mutex_lock(&state->internal->demod_lock);
reg = stv090x_read_reg(state, STV090x_STOPCLK2);
STV090x_SETFIELD(reg, STOP_CLKVIT1_FIELD, enable);
if (stv090x_write_reg(state, STV090x_STOPCLK2, reg) < 0)
goto err;
- mutex_unlock(&demod_lock);
+ mutex_unlock(&state->internal->demod_lock);
break;
case STV090x_DEMODULATOR_1:
- mutex_lock(&demod_lock);
+ mutex_lock(&state->internal->demod_lock);
reg = stv090x_read_reg(state, STV090x_STOPCLK2);
STV090x_SETFIELD(reg, STOP_CLKVIT2_FIELD, enable);
if (stv090x_write_reg(state, STV090x_STOPCLK2, reg) < 0)
goto err;
- mutex_unlock(&demod_lock);
+ mutex_unlock(&state->internal->demod_lock);
break;
default:
@@ -1126,14 +1209,14 @@
}
return 0;
err:
- mutex_unlock(&demod_lock);
+ mutex_unlock(&state->internal->demod_lock);
dprintk(FE_ERROR, 1, "I/O error");
return -1;
}
static int stv090x_dvbs_track_crl(struct stv090x_state *state)
{
- if (state->dev_ver >= 0x30) {
+ if (state->internal->dev_ver >= 0x30) {
/* Set ACLC BCLC optimised value vs SR */
if (state->srate >= 15000000) {
if (STV090x_WRITE_DEMOD(state, ACLC, 0x2b) < 0)
@@ -1215,7 +1298,7 @@
if (STV090x_WRITE_DEMOD(state, BCLC, 0x09) < 0)
goto err;
- if (state->dev_ver <= 0x20) {
+ if (state->internal->dev_ver <= 0x20) {
/* enable S2 carrier loop */
if (STV090x_WRITE_DEMOD(state, CAR2CFG, 0x26) < 0)
goto err;
@@ -1246,6 +1329,10 @@
default:
/* enable DVB-S2 and DVB-S2 in Auto MODE */
reg = STV090x_READ_DEMOD(state, DMDCFGMD);
+ STV090x_SETFIELD_Px(reg, DVBS1_ENABLE_FIELD, 0);
+ STV090x_SETFIELD_Px(reg, DVBS2_ENABLE_FIELD, 0);
+ if (STV090x_WRITE_DEMOD(state, DMDCFGMD, reg) < 0)
+ goto err;
STV090x_SETFIELD_Px(reg, DVBS1_ENABLE_FIELD, 1);
STV090x_SETFIELD_Px(reg, DVBS2_ENABLE_FIELD, 1);
if (STV090x_WRITE_DEMOD(state, DMDCFGMD, reg) < 0)
@@ -1257,7 +1344,7 @@
if (stv090x_dvbs_track_crl(state) < 0)
goto err;
- if (state->dev_ver <= 0x20) {
+ if (state->internal->dev_ver <= 0x20) {
/* enable S2 carrier loop */
if (STV090x_WRITE_DEMOD(state, CAR2CFG, 0x26) < 0)
goto err;
@@ -1304,7 +1391,7 @@
if (STV090x_WRITE_DEMOD(state, DMDISTATE, reg) < 0)
goto err;
- if (state->dev_ver <= 0x20) {
+ if (state->internal->dev_ver <= 0x20) {
if (state->srate <= 5000000) {
if (STV090x_WRITE_DEMOD(state, CARCFG, 0x44) < 0)
goto err;
@@ -1348,7 +1435,7 @@
* CFR max = +1MHz
*/
freq_abs = 1000 << 16;
- freq_abs /= (state->mclk / 1000);
+ freq_abs /= (state->internal->mclk / 1000);
freq = (s16) freq_abs;
} else {
/* COLD Start
@@ -1358,7 +1445,7 @@
*/
freq_abs = (state->search_range / 2000) + 600;
freq_abs = freq_abs << 16;
- freq_abs /= (state->mclk / 1000);
+ freq_abs /= (state->internal->mclk / 1000);
freq = (s16) freq_abs;
}
@@ -1381,7 +1468,7 @@
if (STV090x_WRITE_DEMOD(state, CFRINIT0, 0) < 0)
goto err;
- if (state->dev_ver >= 0x20) {
+ if (state->internal->dev_ver >= 0x20) {
if (STV090x_WRITE_DEMOD(state, EQUALCFG, 0x41) < 0)
goto err;
if (STV090x_WRITE_DEMOD(state, FFECFG, 0x41) < 0)
@@ -1418,10 +1505,10 @@
if (STV090x_WRITE_DEMOD(state, RTC, 0x88) < 0)
goto err;
- if (state->dev_ver >= 0x20) {
+ if (state->internal->dev_ver >= 0x20) {
/*Frequency offset detector setting*/
if (state->srate < 2000000) {
- if (state->dev_ver <= 0x20) {
+ if (state->internal->dev_ver <= 0x20) {
/* Cut 2 */
if (STV090x_WRITE_DEMOD(state, CARFREQ, 0x39) < 0)
goto err;
@@ -1512,7 +1599,7 @@
steps = 1;
dir = 1;
- freq_step = (1000000 * 256) / (state->mclk / 256);
+ freq_step = (1000000 * 256) / (state->internal->mclk / 256);
freq_init = 0;
for (i = 0; i < steps; i++) {
@@ -1583,7 +1670,7 @@
u32 srate_coarse = 0, agc2 = 0, car_step = 1200, reg;
u32 agc2th;
- if (state->dev_ver >= 0x30)
+ if (state->internal->dev_ver >= 0x30)
agc2th = 0x2e00;
else
agc2th = 0x1f00;
@@ -1619,13 +1706,13 @@
if (STV090x_WRITE_DEMOD(state, AGC2REF, 0x50) < 0)
goto err;
- if (state->dev_ver >= 0x30) {
+ if (state->internal->dev_ver >= 0x30) {
if (STV090x_WRITE_DEMOD(state, CARFREQ, 0x99) < 0)
goto err;
if (STV090x_WRITE_DEMOD(state, SFRSTEP, 0x98) < 0)
goto err;
- } else if (state->dev_ver >= 0x20) {
+ } else if (state->internal->dev_ver >= 0x20) {
if (STV090x_WRITE_DEMOD(state, CARFREQ, 0x6a) < 0)
goto err;
if (STV090x_WRITE_DEMOD(state, SFRSTEP, 0x95) < 0)
@@ -1677,7 +1764,7 @@
STV090x_READ_DEMOD(state, AGC2I0);
}
agc2 /= 10;
- srate_coarse = stv090x_get_srate(state, state->mclk);
+ srate_coarse = stv090x_get_srate(state, state->internal->mclk);
cur_step++;
dir *= -1;
if ((tmg_cpt >= 5) && (agc2 < agc2th) &&
@@ -1695,12 +1782,12 @@
if (state->config->tuner_set_frequency) {
if (state->config->tuner_set_frequency(fe, freq) < 0)
- goto err;
+ goto err_gateoff;
}
if (state->config->tuner_set_bandwidth) {
if (state->config->tuner_set_bandwidth(fe, state->tuner_bw) < 0)
- goto err;
+ goto err_gateoff;
}
if (stv090x_i2c_gate_ctrl(fe, 0) < 0)
@@ -1713,7 +1800,7 @@
if (state->config->tuner_get_status) {
if (state->config->tuner_get_status(fe, ®) < 0)
- goto err;
+ goto err_gateoff;
}
if (reg)
@@ -1729,9 +1816,12 @@
if (!tmg_lock)
srate_coarse = 0;
else
- srate_coarse = stv090x_get_srate(state, state->mclk);
+ srate_coarse = stv090x_get_srate(state, state->internal->mclk);
return srate_coarse;
+
+err_gateoff:
+ stv090x_i2c_gate_ctrl(fe, 0);
err:
dprintk(FE_ERROR, 1, "I/O error");
return -1;
@@ -1741,7 +1831,7 @@
{
u32 srate_coarse, freq_coarse, sym, reg;
- srate_coarse = stv090x_get_srate(state, state->mclk);
+ srate_coarse = stv090x_get_srate(state, state->internal->mclk);
freq_coarse = STV090x_READ_DEMOD(state, CFR2) << 8;
freq_coarse |= STV090x_READ_DEMOD(state, CFR1);
sym = 13 * (srate_coarse / 10); /* SFRUP = SFR + 30% */
@@ -1767,10 +1857,10 @@
if (STV090x_WRITE_DEMOD(state, AGC2REF, 0x38) < 0)
goto err;
- if (state->dev_ver >= 0x30) {
+ if (state->internal->dev_ver >= 0x30) {
if (STV090x_WRITE_DEMOD(state, CARFREQ, 0x79) < 0)
goto err;
- } else if (state->dev_ver >= 0x20) {
+ } else if (state->internal->dev_ver >= 0x20) {
if (STV090x_WRITE_DEMOD(state, CARFREQ, 0x49) < 0)
goto err;
}
@@ -1778,20 +1868,20 @@
if (srate_coarse > 3000000) {
sym = 13 * (srate_coarse / 10); /* SFRUP = SFR + 30% */
sym = (sym / 1000) * 65536;
- sym /= (state->mclk / 1000);
+ sym /= (state->internal->mclk / 1000);
if (STV090x_WRITE_DEMOD(state, SFRUP1, (sym >> 8) & 0x7f) < 0)
goto err;
if (STV090x_WRITE_DEMOD(state, SFRUP0, sym & 0xff) < 0)
goto err;
sym = 10 * (srate_coarse / 13); /* SFRLOW = SFR - 30% */
sym = (sym / 1000) * 65536;
- sym /= (state->mclk / 1000);
+ sym /= (state->internal->mclk / 1000);
if (STV090x_WRITE_DEMOD(state, SFRLOW1, (sym >> 8) & 0x7f) < 0)
goto err;
if (STV090x_WRITE_DEMOD(state, SFRLOW0, sym & 0xff) < 0)
goto err;
sym = (srate_coarse / 1000) * 65536;
- sym /= (state->mclk / 1000);
+ sym /= (state->internal->mclk / 1000);
if (STV090x_WRITE_DEMOD(state, SFRINIT1, (sym >> 8) & 0xff) < 0)
goto err;
if (STV090x_WRITE_DEMOD(state, SFRINIT0, sym & 0xff) < 0)
@@ -1799,20 +1889,20 @@
} else {
sym = 13 * (srate_coarse / 10); /* SFRUP = SFR + 30% */
sym = (sym / 100) * 65536;
- sym /= (state->mclk / 100);
+ sym /= (state->internal->mclk / 100);
if (STV090x_WRITE_DEMOD(state, SFRUP1, (sym >> 8) & 0x7f) < 0)
goto err;
if (STV090x_WRITE_DEMOD(state, SFRUP0, sym & 0xff) < 0)
goto err;
sym = 10 * (srate_coarse / 14); /* SFRLOW = SFR - 30% */
sym = (sym / 100) * 65536;
- sym /= (state->mclk / 100);
+ sym /= (state->internal->mclk / 100);
if (STV090x_WRITE_DEMOD(state, SFRLOW1, (sym >> 8) & 0x7f) < 0)
goto err;
if (STV090x_WRITE_DEMOD(state, SFRLOW0, sym & 0xff) < 0)
goto err;
sym = (srate_coarse / 100) * 65536;
- sym /= (state->mclk / 100);
+ sym /= (state->internal->mclk / 100);
if (STV090x_WRITE_DEMOD(state, SFRINIT1, (sym >> 8) & 0xff) < 0)
goto err;
if (STV090x_WRITE_DEMOD(state, SFRINIT0, sym & 0xff) < 0)
@@ -1874,18 +1964,19 @@
u32 agc2, reg, srate_coarse;
s32 cpt_fail, agc2_ovflw, i;
u8 k_ref, k_max, k_min;
- int coarse_fail, lock;
+ int coarse_fail = 0;
+ int lock;
k_max = 110;
k_min = 10;
agc2 = stv090x_get_agc2_min_level(state);
- if (agc2 > STV090x_SEARCH_AGC2_TH(state->dev_ver)) {
+ if (agc2 > STV090x_SEARCH_AGC2_TH(state->internal->dev_ver)) {
lock = 0;
} else {
- if (state->dev_ver <= 0x20) {
+ if (state->internal->dev_ver <= 0x20) {
if (STV090x_WRITE_DEMOD(state, CARCFG, 0xc4) < 0)
goto err;
} else {
@@ -1897,7 +1988,7 @@
if (STV090x_WRITE_DEMOD(state, RTCS2, 0x44) < 0)
goto err;
- if (state->dev_ver >= 0x20) {
+ if (state->internal->dev_ver >= 0x20) {
if (STV090x_WRITE_DEMOD(state, EQUALCFG, 0x41) < 0)
goto err;
if (STV090x_WRITE_DEMOD(state, FFECFG, 0x41) < 0)
@@ -1956,7 +2047,7 @@
u32 reg;
s32 tmg_cpt = 0, i;
u8 freq, tmg_thh, tmg_thl;
- int tmg_lock;
+ int tmg_lock = 0;
freq = STV090x_READ_DEMOD(state, CARFREQ);
tmg_thh = STV090x_READ_DEMOD(state, TMGTHRISE);
@@ -2080,12 +2171,12 @@
if (state->config->tuner_set_frequency) {
if (state->config->tuner_set_frequency(fe, freq) < 0)
- goto err;
+ goto err_gateoff;
}
if (state->config->tuner_set_bandwidth) {
if (state->config->tuner_set_bandwidth(fe, state->tuner_bw) < 0)
- goto err;
+ goto err_gateoff;
}
if (stv090x_i2c_gate_ctrl(fe, 0) < 0)
@@ -2098,7 +2189,7 @@
if (state->config->tuner_get_status) {
if (state->config->tuner_get_status(fe, ®) < 0)
- goto err;
+ goto err_gateoff;
}
if (reg)
@@ -2129,6 +2220,8 @@
return lock;
+err_gateoff:
+ stv090x_i2c_gate_ctrl(fe, 0);
err:
dprintk(FE_ERROR, 1, "I/O error");
return -1;
@@ -2142,13 +2235,13 @@
car_max = state->search_range / 1000;
car_max += car_max / 10;
car_max = 65536 * (car_max / 2);
- car_max /= (state->mclk / 1000);
+ car_max /= (state->internal->mclk / 1000);
if (car_max > 0x4000)
car_max = 0x4000 ; /* maxcarrier should be<= +-1/4 Mclk */
inc = srate;
- inc /= state->mclk / 1000;
+ inc /= state->internal->mclk / 1000;
inc *= 256;
inc *= 256;
inc /= 1000;
@@ -2209,7 +2302,7 @@
car_max += (car_max / 10); /* 10% margin */
car_max = (65536 * car_max / 2);
- car_max /= state->mclk / 1000;
+ car_max /= state->internal->mclk / 1000;
if (car_max > 0x4000)
car_max = 0x4000;
@@ -2234,7 +2327,7 @@
car_max = state->search_range / 1000;
car_max += (car_max / 10);
car_max = (65536 * car_max / 2);
- car_max /= (state->mclk / 1000);
+ car_max /= (state->internal->mclk / 1000);
if (car_max > 0x4000)
car_max = 0x4000;
@@ -2304,7 +2397,7 @@
case STV090x_SEARCH_DVBS1:
case STV090x_SEARCH_DSS:
/* accelerate the frequency detector */
- if (state->dev_ver >= 0x20) {
+ if (state->internal->dev_ver >= 0x20) {
if (STV090x_WRITE_DEMOD(state, CARFREQ, 0x3B) < 0)
goto err;
}
@@ -2315,7 +2408,7 @@
break;
case STV090x_SEARCH_DVBS2:
- if (state->dev_ver >= 0x20) {
+ if (state->internal->dev_ver >= 0x20) {
if (STV090x_WRITE_DEMOD(state, CORRELABS, 0x79) < 0)
goto err;
}
@@ -2328,7 +2421,7 @@
case STV090x_SEARCH_AUTO:
default:
/* accelerate the frequency detector */
- if (state->dev_ver >= 0x20) {
+ if (state->internal->dev_ver >= 0x20) {
if (STV090x_WRITE_DEMOD(state, CARFREQ, 0x3b) < 0)
goto err;
if (STV090x_WRITE_DEMOD(state, CORRELABS, 0x79) < 0)
@@ -2350,7 +2443,7 @@
/*run the SW search 2 times maximum*/
if (lock || no_signal || (trials == 2)) {
/*Check if the demod is not losing lock in DVBS2*/
- if (state->dev_ver >= 0x20) {
+ if (state->internal->dev_ver >= 0x20) {
if (STV090x_WRITE_DEMOD(state, CARFREQ, 0x49) < 0)
goto err;
if (STV090x_WRITE_DEMOD(state, CORRELABS, 0x9e) < 0)
@@ -2372,7 +2465,7 @@
/*FALSE lock, The demod is loosing lock */
lock = 0;
if (trials < 2) {
- if (state->dev_ver >= 0x20) {
+ if (state->internal->dev_ver >= 0x20) {
if (STV090x_WRITE_DEMOD(state, CORRELABS, 0x79) < 0)
goto err;
}
@@ -2422,11 +2515,11 @@
derot |= STV090x_READ_DEMOD(state, CFR0);
derot = comp2(derot, 24);
- int_1 = state->mclk >> 12;
+ int_1 = mclk >> 12;
int_2 = derot >> 12;
/* carrier_frequency = MasterClock * Reg / 2^24 */
- tmp_1 = state->mclk % 0x1000;
+ tmp_1 = mclk % 0x1000;
tmp_2 = derot % 0x1000;
derot = (int_1 * int_2) +
@@ -2502,13 +2595,13 @@
if (state->config->tuner_get_frequency) {
if (state->config->tuner_get_frequency(fe, &state->frequency) < 0)
- goto err;
+ goto err_gateoff;
}
if (stv090x_i2c_gate_ctrl(fe, 0) < 0)
goto err;
- offst_freq = stv090x_get_car_freq(state, state->mclk) / 1000;
+ offst_freq = stv090x_get_car_freq(state, state->internal->mclk) / 1000;
state->frequency += offst_freq;
if (stv090x_get_viterbi(state) < 0)
@@ -2530,7 +2623,7 @@
if (state->config->tuner_get_frequency) {
if (state->config->tuner_get_frequency(fe, &state->frequency) < 0)
- goto err;
+ goto err_gateoff;
}
if (stv090x_i2c_gate_ctrl(fe, 0) < 0)
@@ -2550,6 +2643,9 @@
}
return STV090x_OUTOFRANGE;
+
+err_gateoff:
+ stv090x_i2c_gate_ctrl(fe, 0);
err:
dprintk(FE_ERROR, 1, "I/O error");
return -1;
@@ -2579,7 +2675,7 @@
s32 i;
struct stv090x_long_frame_crloop *car_loop, *car_loop_qpsk_low, *car_loop_apsk_low;
- if (state->dev_ver == 0x20) {
+ if (state->internal->dev_ver == 0x20) {
car_loop = stv090x_s2_crl_cut20;
car_loop_qpsk_low = stv090x_s2_lowqpsk_crl_cut20;
car_loop_apsk_low = stv090x_s2_apsk_crl_cut20;
@@ -2700,7 +2796,7 @@
break;
}
- if (state->dev_ver >= 0x30) {
+ if (state->internal->dev_ver >= 0x30) {
/* Cut 3.0 and up */
short_crl = stv090x_s2_short_crl_cut30;
} else {
@@ -2732,7 +2828,7 @@
s32 srate, pilots, aclc, f_1, f_0, i = 0, blind_tune = 0;
u32 reg;
- srate = stv090x_get_srate(state, state->mclk);
+ srate = stv090x_get_srate(state, state->internal->mclk);
srate += stv090x_get_tmgoffst(state, srate);
switch (state->delsys) {
@@ -2751,7 +2847,7 @@
if (STV090x_WRITE_DEMOD(state, DEMOD, reg) < 0)
goto err;
- if (state->dev_ver >= 0x30) {
+ if (state->internal->dev_ver >= 0x30) {
if (stv090x_get_viterbi(state) < 0)
goto err;
@@ -2868,7 +2964,7 @@
goto err;
}
- if (state->dev_ver >= 0x20) {
+ if (state->internal->dev_ver >= 0x20) {
if ((state->search_mode == STV090x_SEARCH_DVBS1) ||
(state->search_mode == STV090x_SEARCH_DSS) ||
(state->search_mode == STV090x_SEARCH_AUTO)) {
@@ -2890,7 +2986,8 @@
if (STV090x_WRITE_DEMOD(state, SFRLOW1, 0x80) < 0)
goto err;
- if ((state->dev_ver >= 0x20) || (blind_tune == 1) || (state->srate < 10000000)) {
+ if ((state->internal->dev_ver >= 0x20) || (blind_tune == 1) ||
+ (state->srate < 10000000)) {
/* update initial carrier freq with the found freq offset */
if (STV090x_WRITE_DEMOD(state, CFRINIT1, f_1) < 0)
goto err;
@@ -2898,7 +2995,7 @@
goto err;
state->tuner_bw = stv090x_car_width(srate, state->rolloff) + 10000000;
- if ((state->dev_ver >= 0x20) || (blind_tune == 1)) {
+ if ((state->internal->dev_ver >= 0x20) || (blind_tune == 1)) {
if (state->algo != STV090x_WARM_SEARCH) {
@@ -2907,7 +3004,7 @@
if (state->config->tuner_set_bandwidth) {
if (state->config->tuner_set_bandwidth(fe, state->tuner_bw) < 0)
- goto err;
+ goto err_gateoff;
}
if (stv090x_i2c_gate_ctrl(fe, 0) < 0)
@@ -2950,7 +3047,7 @@
}
- if (state->dev_ver >= 0x20) {
+ if (state->internal->dev_ver >= 0x20) {
if (STV090x_WRITE_DEMOD(state, CARFREQ, 0x49) < 0)
goto err;
}
@@ -2959,6 +3056,9 @@
stv090x_set_vit_thtracq(state);
return 0;
+
+err_gateoff:
+ stv090x_i2c_gate_ctrl(fe, 0);
err:
dprintk(FE_ERROR, 1, "I/O error");
return -1;
@@ -3026,7 +3126,7 @@
{
u32 reg;
- if (state->dev_ver <= 0x20) {
+ if (state->internal->dev_ver <= 0x20) {
/* rolloff to auto mode if DVBS2 */
reg = STV090x_READ_DEMOD(state, DEMOD);
STV090x_SETFIELD_Px(reg, MANUAL_SXROLLOFF_FIELD, 0x00);
@@ -3062,7 +3162,7 @@
if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x5c) < 0) /* Demod stop */
goto err;
- if (state->dev_ver >= 0x20) {
+ if (state->internal->dev_ver >= 0x20) {
if (state->srate > 5000000) {
if (STV090x_WRITE_DEMOD(state, CORRELABS, 0x9e) < 0)
goto err;
@@ -3102,7 +3202,7 @@
if (STV090x_WRITE_DEMOD(state, AGC2REF, 0x38) < 0)
goto err;
- if (state->dev_ver >= 0x20) {
+ if (state->internal->dev_ver >= 0x20) {
if (STV090x_WRITE_DEMOD(state, KREFTMG, 0x5a) < 0)
goto err;
if (state->algo == STV090x_COLD_SEARCH)
@@ -3120,9 +3220,11 @@
if (stv090x_set_srate(state, state->srate) < 0)
goto err;
- if (stv090x_set_max_srate(state, state->mclk, state->srate) < 0)
+ if (stv090x_set_max_srate(state, state->internal->mclk,
+ state->srate) < 0)
goto err;
- if (stv090x_set_min_srate(state, state->mclk, state->srate) < 0)
+ if (stv090x_set_min_srate(state, state->internal->mclk,
+ state->srate) < 0)
goto err;
if (state->srate >= 10000000)
@@ -3136,18 +3238,21 @@
goto err;
if (state->config->tuner_set_bbgain) {
- if (state->config->tuner_set_bbgain(fe, 10) < 0) /* 10dB */
- goto err;
+ reg = state->config->tuner_bbgain;
+ if (reg == 0)
+ reg = 10; /* default: 10dB */
+ if (state->config->tuner_set_bbgain(fe, reg) < 0)
+ goto err_gateoff;
}
if (state->config->tuner_set_frequency) {
if (state->config->tuner_set_frequency(fe, state->frequency) < 0)
- goto err;
+ goto err_gateoff;
}
if (state->config->tuner_set_bandwidth) {
if (state->config->tuner_set_bandwidth(fe, state->tuner_bw) < 0)
- goto err;
+ goto err_gateoff;
}
if (stv090x_i2c_gate_ctrl(fe, 0) < 0)
@@ -3155,22 +3260,22 @@
msleep(50);
- if (stv090x_i2c_gate_ctrl(fe, 1) < 0)
- goto err;
-
if (state->config->tuner_get_status) {
- if (state->config->tuner_get_status(fe, ®) < 0)
+ if (stv090x_i2c_gate_ctrl(fe, 1) < 0)
goto err;
+ if (state->config->tuner_get_status(fe, ®) < 0)
+ goto err_gateoff;
+ if (stv090x_i2c_gate_ctrl(fe, 0) < 0)
+ goto err;
+
+ if (reg)
+ dprintk(FE_DEBUG, 1, "Tuner phase locked");
+ else {
+ dprintk(FE_DEBUG, 1, "Tuner unlocked");
+ return STV090x_NOCARRIER;
+ }
}
- if (reg)
- dprintk(FE_DEBUG, 1, "Tuner phase locked");
- else
- dprintk(FE_DEBUG, 1, "Tuner unlocked");
-
- if (stv090x_i2c_gate_ctrl(fe, 0) < 0)
- goto err;
-
msleep(10);
agc1_power = MAKEWORD16(STV090x_READ_DEMOD(state, AGCIQIN1),
STV090x_READ_DEMOD(state, AGCIQIN0));
@@ -3194,7 +3299,7 @@
reg = STV090x_READ_DEMOD(state, DEMOD);
STV090x_SETFIELD_Px(reg, SPECINV_CONTROL_FIELD, state->inversion);
- if (state->dev_ver <= 0x20) {
+ if (state->internal->dev_ver <= 0x20) {
/* rolloff to auto mode if DVBS2 */
STV090x_SETFIELD_Px(reg, MANUAL_SXROLLOFF_FIELD, 1);
} else {
@@ -3238,7 +3343,7 @@
if ((lock) && (signal_state == STV090x_RANGEOK)) { /* signal within Range */
stv090x_optimize_track(state);
- if (state->dev_ver >= 0x20) {
+ if (state->internal->dev_ver >= 0x20) {
/* >= Cut 2.0 :release TS reset after
* demod lock and optimized Tracking
*/
@@ -3293,6 +3398,8 @@
}
return signal_state;
+err_gateoff:
+ stv090x_i2c_gate_ctrl(fe, 0);
err:
dprintk(FE_ERROR, 1, "I/O error");
return -1;
@@ -3303,6 +3410,9 @@
struct stv090x_state *state = fe->demodulator_priv;
struct dtv_frontend_properties *props = &fe->dtv_property_cache;
+ if (p->frequency == 0)
+ return DVBFE_ALGO_SEARCH_INVALID;
+
state->delsys = props->delivery_system;
state->frequency = p->frequency;
state->srate = p->u.qpsk.symbol_rate;
@@ -3353,7 +3463,8 @@
if (STV090x_GETFIELD_Px(reg, PKTDELIN_LOCK_FIELD)) {
reg = STV090x_READ_DEMOD(state, TSSTATUS);
if (STV090x_GETFIELD_Px(reg, TSFIFO_LINEOK_FIELD)) {
- *status = FE_HAS_CARRIER |
+ *status = FE_HAS_SIGNAL |
+ FE_HAS_CARRIER |
FE_HAS_VITERBI |
FE_HAS_SYNC |
FE_HAS_LOCK;
@@ -3370,7 +3481,11 @@
if (STV090x_GETFIELD_Px(reg, LOCKEDVIT_FIELD)) {
reg = STV090x_READ_DEMOD(state, TSSTATUS);
if (STV090x_GETFIELD_Px(reg, TSFIFO_LINEOK_FIELD)) {
- *status = FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK;
+ *status = FE_HAS_SIGNAL |
+ FE_HAS_CARRIER |
+ FE_HAS_VITERBI |
+ FE_HAS_SYNC |
+ FE_HAS_LOCK;
}
}
}
@@ -3770,6 +3885,15 @@
{
struct stv090x_state *state = fe->demodulator_priv;
+ state->internal->num_used--;
+ if (state->internal->num_used <= 0) {
+
+ dprintk(FE_ERROR, 1, "Actually removing");
+
+ remove_dev(state->internal);
+ kfree(state->internal);
+ }
+
kfree(state);
}
@@ -3901,10 +4025,10 @@
if (stv090x_write_reg(state, STV090x_NCOARSE, reg) < 0)
goto err;
- state->mclk = stv090x_get_mclk(state);
+ state->internal->mclk = stv090x_get_mclk(state);
/*Set the DiseqC frequency to 22KHz */
- div = state->mclk / 704000;
+ div = state->internal->mclk / 704000;
if (STV090x_WRITE_DEMOD(state, F22TX, div) < 0)
goto err;
if (STV090x_WRITE_DEMOD(state, F22RX, div) < 0)
@@ -3920,7 +4044,7 @@
{
u32 reg;
- if (state->dev_ver >= 0x20) {
+ if (state->internal->dev_ver >= 0x20) {
switch (state->config->ts1_mode) {
case STV090x_TSMODE_PARALLEL_PUNCTURED:
case STV090x_TSMODE_DVBCI:
@@ -4092,6 +4216,71 @@
default:
break;
}
+
+ if (state->config->ts1_clk > 0) {
+ u32 speed;
+
+ switch (state->config->ts1_mode) {
+ case STV090x_TSMODE_PARALLEL_PUNCTURED:
+ case STV090x_TSMODE_DVBCI:
+ default:
+ speed = state->internal->mclk /
+ (state->config->ts1_clk / 4);
+ if (speed < 0x08)
+ speed = 0x08;
+ if (speed > 0xFF)
+ speed = 0xFF;
+ break;
+ case STV090x_TSMODE_SERIAL_PUNCTURED:
+ case STV090x_TSMODE_SERIAL_CONTINUOUS:
+ speed = state->internal->mclk /
+ (state->config->ts1_clk / 32);
+ if (speed < 0x20)
+ speed = 0x20;
+ if (speed > 0xFF)
+ speed = 0xFF;
+ break;
+ }
+ reg = stv090x_read_reg(state, STV090x_P1_TSCFGM);
+ STV090x_SETFIELD_Px(reg, TSFIFO_MANSPEED_FIELD, 3);
+ if (stv090x_write_reg(state, STV090x_P1_TSCFGM, reg) < 0)
+ goto err;
+ if (stv090x_write_reg(state, STV090x_P1_TSSPEED, speed) < 0)
+ goto err;
+ }
+
+ if (state->config->ts2_clk > 0) {
+ u32 speed;
+
+ switch (state->config->ts2_mode) {
+ case STV090x_TSMODE_PARALLEL_PUNCTURED:
+ case STV090x_TSMODE_DVBCI:
+ default:
+ speed = state->internal->mclk /
+ (state->config->ts2_clk / 4);
+ if (speed < 0x08)
+ speed = 0x08;
+ if (speed > 0xFF)
+ speed = 0xFF;
+ break;
+ case STV090x_TSMODE_SERIAL_PUNCTURED:
+ case STV090x_TSMODE_SERIAL_CONTINUOUS:
+ speed = state->internal->mclk /
+ (state->config->ts2_clk / 32);
+ if (speed < 0x20)
+ speed = 0x20;
+ if (speed > 0xFF)
+ speed = 0xFF;
+ break;
+ }
+ reg = stv090x_read_reg(state, STV090x_P2_TSCFGM);
+ STV090x_SETFIELD_Px(reg, TSFIFO_MANSPEED_FIELD, 3);
+ if (stv090x_write_reg(state, STV090x_P2_TSCFGM, reg) < 0)
+ goto err;
+ if (stv090x_write_reg(state, STV090x_P2_TSSPEED, speed) < 0)
+ goto err;
+ }
+
reg = stv090x_read_reg(state, STV090x_P2_TSCFGH);
STV090x_SETFIELD_Px(reg, RST_HWARE_FIELD, 0x01);
if (stv090x_write_reg(state, STV090x_P2_TSCFGH, reg) < 0)
@@ -4120,6 +4309,15 @@
const struct stv090x_config *config = state->config;
u32 reg;
+ if (state->internal->mclk == 0) {
+ stv090x_set_mclk(state, 135000000, config->xtal); /* 135 Mhz */
+ msleep(5);
+ if (stv090x_write_reg(state, STV090x_SYNTCTRL,
+ 0x20 | config->clk_mode) < 0)
+ goto err;
+ stv090x_get_mclk(state);
+ }
+
if (stv090x_wakeup(fe) < 0) {
dprintk(FE_ERROR, 1, "Error waking device");
goto err;
@@ -4142,12 +4340,12 @@
if (config->tuner_set_mode) {
if (config->tuner_set_mode(fe, TUNER_WAKE) < 0)
- goto err;
+ goto err_gateoff;
}
if (config->tuner_init) {
if (config->tuner_init(fe) < 0)
- goto err;
+ goto err_gateoff;
}
if (stv090x_i2c_gate_ctrl(fe, 0) < 0)
@@ -4157,6 +4355,9 @@
goto err;
return 0;
+
+err_gateoff:
+ stv090x_i2c_gate_ctrl(fe, 0);
err:
dprintk(FE_ERROR, 1, "I/O error");
return -1;
@@ -4188,16 +4389,26 @@
}
/* STV090x init */
- if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x5c) < 0) /* Stop Demod */
+
+ /* Stop Demod */
+ if (stv090x_write_reg(state, STV090x_P1_DMDISTATE, 0x5c) < 0)
+ goto err;
+ if (stv090x_write_reg(state, STV090x_P2_DMDISTATE, 0x5c) < 0)
goto err;
msleep(5);
- if (STV090x_WRITE_DEMOD(state, TNRCFG, 0x6c) < 0) /* check register ! (No Tuner Mode) */
+ /* Set No Tuner Mode */
+ if (stv090x_write_reg(state, STV090x_P1_TNRCFG, 0x6c) < 0)
+ goto err;
+ if (stv090x_write_reg(state, STV090x_P2_TNRCFG, 0x6c) < 0)
goto err;
+ /* I2C repeater OFF */
STV090x_SETFIELD_Px(reg, ENARPT_LEVEL_FIELD, config->repeater_level);
- if (STV090x_WRITE_DEMOD(state, I2CRPT, reg) < 0) /* repeater OFF */
+ if (stv090x_write_reg(state, STV090x_P1_I2CRPT, reg) < 0)
+ goto err;
+ if (stv090x_write_reg(state, STV090x_P2_I2CRPT, reg) < 0)
goto err;
if (stv090x_write_reg(state, STV090x_NCOARSE, 0x13) < 0) /* set PLL divider */
@@ -4216,8 +4427,8 @@
goto err;
}
- state->dev_ver = stv090x_read_reg(state, STV090x_MID);
- if (state->dev_ver >= 0x20) {
+ state->internal->dev_ver = stv090x_read_reg(state, STV090x_MID);
+ if (state->internal->dev_ver >= 0x20) {
if (stv090x_write_reg(state, STV090x_TSGENERAL, 0x0c) < 0)
goto err;
@@ -4228,28 +4439,36 @@
goto err;
}
- } else if (state->dev_ver < 0x20) {
+ } else if (state->internal->dev_ver < 0x20) {
dprintk(FE_ERROR, 1, "ERROR: Unsupported Cut: 0x%02x!",
- state->dev_ver);
+ state->internal->dev_ver);
goto err;
- } else if (state->dev_ver > 0x30) {
+ } else if (state->internal->dev_ver > 0x30) {
/* we shouldn't bail out from here */
dprintk(FE_ERROR, 1, "INFO: Cut: 0x%02x probably incomplete support!",
- state->dev_ver);
+ state->internal->dev_ver);
}
+ /* ADC1 range */
+ reg = stv090x_read_reg(state, STV090x_TSTTNR1);
+ STV090x_SETFIELD(reg, ADC1_INMODE_FIELD,
+ (config->adc1_range == STV090x_ADC_1Vpp) ? 0 : 1);
+ if (stv090x_write_reg(state, STV090x_TSTTNR1, reg) < 0)
+ goto err;
+
+ /* ADC2 range */
+ reg = stv090x_read_reg(state, STV090x_TSTTNR3);
+ STV090x_SETFIELD(reg, ADC2_INMODE_FIELD,
+ (config->adc2_range == STV090x_ADC_1Vpp) ? 0 : 1);
+ if (stv090x_write_reg(state, STV090x_TSTTNR3, reg) < 0)
+ goto err;
+
if (stv090x_write_reg(state, STV090x_TSTRES0, 0x80) < 0)
goto err;
if (stv090x_write_reg(state, STV090x_TSTRES0, 0x00) < 0)
goto err;
- stv090x_set_mclk(state, 135000000, config->xtal); /* 135 Mhz */
- msleep(5);
- if (stv090x_write_reg(state, STV090x_SYNTCTRL, 0x20 | config->clk_mode) < 0)
- goto err;
- stv090x_get_mclk(state);
-
return 0;
err:
dprintk(FE_ERROR, 1, "I/O error");
@@ -4299,6 +4518,7 @@
enum stv090x_demodulator demod)
{
struct stv090x_state *state = NULL;
+ struct stv090x_dev *temp_int;
state = kzalloc(sizeof (struct stv090x_state), GFP_KERNEL);
if (state == NULL)
@@ -4314,8 +4534,32 @@
state->device = config->device;
state->rolloff = STV090x_RO_35; /* default */
- if (state->demod == STV090x_DEMODULATOR_0)
- mutex_init(&demod_lock);
+ temp_int = find_dev(state->i2c,
+ state->config->address);
+
+ if ((temp_int != NULL) && (state->demod_mode == STV090x_DUAL)) {
+ state->internal = temp_int->internal;
+ state->internal->num_used++;
+ dprintk(FE_INFO, 1, "Found Internal Structure!");
+ dprintk(FE_ERROR, 1, "Attaching %s demodulator(%d) Cut=0x%02x",
+ state->device == STV0900 ? "STV0900" : "STV0903",
+ demod,
+ state->internal->dev_ver);
+ return &state->frontend;
+ } else {
+ state->internal = kmalloc(sizeof(struct stv090x_internal),
+ GFP_KERNEL);
+ temp_int = append_internal(state->internal);
+ state->internal->num_used = 1;
+ state->internal->mclk = 0;
+ state->internal->dev_ver = 0;
+ state->internal->i2c_adap = state->i2c;
+ state->internal->i2c_addr = state->config->address;
+ dprintk(FE_INFO, 1, "Create New Internal Structure!");
+ }
+
+ mutex_init(&state->internal->demod_lock);
+ mutex_init(&state->internal->tuner_lock);
if (stv090x_sleep(&state->frontend) < 0) {
dprintk(FE_ERROR, 1, "Error putting device to sleep");
@@ -4331,10 +4575,10 @@
goto error;
}
- dprintk(FE_ERROR, 1, "Attaching %s demodulator(%d) Cut=0x%02x\n",
+ dprintk(FE_ERROR, 1, "Attaching %s demodulator(%d) Cut=0x%02x",
state->device == STV0900 ? "STV0900" : "STV0903",
demod,
- state->dev_ver);
+ state->internal->dev_ver);
return &state->frontend;
diff --git a/drivers/media/dvb/frontends/stv090x.h b/drivers/media/dvb/frontends/stv090x.h
index b133807..30f01a6 100644
--- a/drivers/media/dvb/frontends/stv090x.h
+++ b/drivers/media/dvb/frontends/stv090x.h
@@ -60,6 +60,11 @@
STV090x_RPTLEVEL_2 = 7,
};
+enum stv090x_adc_range {
+ STV090x_ADC_2Vpp = 0,
+ STV090x_ADC_1Vpp = 1
+};
+
struct stv090x_config {
enum stv090x_device device;
enum stv090x_mode demod_mode;
@@ -68,13 +73,17 @@
u32 xtal; /* default: 8000000 */
u8 address; /* default: 0x68 */
- u32 ref_clk; /* default: 16000000 FIXME to tuner config */
-
u8 ts1_mode;
u8 ts2_mode;
+ u32 ts1_clk;
+ u32 ts2_clk;
enum stv090x_i2crpt repeater_level;
+ u8 tuner_bbgain; /* default: 10db */
+ enum stv090x_adc_range adc1_range; /* default: 2Vpp */
+ enum stv090x_adc_range adc2_range; /* default: 2Vpp */
+
bool diseqc_envelope_mode;
int (*tuner_init) (struct dvb_frontend *fe);
diff --git a/drivers/media/dvb/frontends/stv090x_priv.h b/drivers/media/dvb/frontends/stv090x_priv.h
index 5921a8d..5b780c8 100644
--- a/drivers/media/dvb/frontends/stv090x_priv.h
+++ b/drivers/media/dvb/frontends/stv090x_priv.h
@@ -230,11 +230,23 @@
s32 read;
};
+struct stv090x_internal {
+ struct i2c_adapter *i2c_adap;
+ u8 i2c_addr;
+
+ struct mutex demod_lock; /* Lock access to shared register */
+ struct mutex tuner_lock; /* Lock access to tuners */
+ s32 mclk; /* Masterclock Divider factor */
+ u32 dev_ver;
+
+ int num_used;
+};
+
struct stv090x_state {
enum stv090x_device device;
enum stv090x_demodulator demod;
enum stv090x_mode demod_mode;
- u32 dev_ver;
+ struct stv090x_internal *internal;
struct i2c_adapter *i2c;
const struct stv090x_config *config;
@@ -256,11 +268,8 @@
u32 frequency;
u32 srate;
- s32 mclk; /* Masterclock Divider factor */
s32 tuner_bw;
- u32 tuner_refclk;
-
s32 search_range;
s32 DemodTimeout;
diff --git a/drivers/media/dvb/frontends/stv6110x.c b/drivers/media/dvb/frontends/stv6110x.c
index bcfcb65..f931ed0 100644
--- a/drivers/media/dvb/frontends/stv6110x.c
+++ b/drivers/media/dvb/frontends/stv6110x.c
@@ -35,8 +35,6 @@
module_param(verbose, int, 0644);
MODULE_PARM_DESC(verbose, "Set Verbosity level");
-static u8 stv6110x_regs[] = {0x07, 0x11, 0xdc, 0x85, 0x17, 0x01, 0xe6, 0x1e};
-
static int stv6110x_read_reg(struct stv6110x_state *stv6110x, u8 reg, u8 *data)
{
int ret;
@@ -58,12 +56,23 @@
return 0;
}
-static int stv6110x_write_reg(struct stv6110x_state *stv6110x, u8 reg, u8 data)
+static int stv6110x_write_regs(struct stv6110x_state *stv6110x, int start, u8 data[], int len)
{
int ret;
const struct stv6110x_config *config = stv6110x->config;
- u8 buf[] = { reg, data };
- struct i2c_msg msg = { .addr = config->addr, .flags = 0, . buf = buf, .len = 2 };
+ u8 buf[len + 1];
+ struct i2c_msg msg = {
+ .addr = config->addr,
+ .flags = 0,
+ .buf = buf,
+ .len = len + 1
+ };
+
+ if (start + len > 8)
+ return -EINVAL;
+
+ buf[0] = start;
+ memcpy(&buf[1], data, len);
ret = i2c_transfer(stv6110x->i2c, &msg, 1);
if (ret != 1) {
@@ -74,18 +83,21 @@
return 0;
}
+static int stv6110x_write_reg(struct stv6110x_state *stv6110x, u8 reg, u8 data)
+{
+ return stv6110x_write_regs(stv6110x, reg, &data, 1);
+}
+
static int stv6110x_init(struct dvb_frontend *fe)
{
struct stv6110x_state *stv6110x = fe->tuner_priv;
int ret;
- u8 i;
- for (i = 0; i < ARRAY_SIZE(stv6110x_regs); i++) {
- ret = stv6110x_write_reg(stv6110x, i, stv6110x_regs[i]);
- if (ret < 0) {
- dprintk(FE_ERROR, 1, "Initialization failed");
- return -1;
- }
+ ret = stv6110x_write_regs(stv6110x, 0, stv6110x->regs,
+ ARRAY_SIZE(stv6110x->regs));
+ if (ret < 0) {
+ dprintk(FE_ERROR, 1, "Initialization failed");
+ return -1;
}
return 0;
@@ -98,23 +110,23 @@
s32 pVal, pCalc, rDivOpt = 0, pCalcOpt = 1000;
u8 i;
- STV6110x_SETFIELD(stv6110x_regs[STV6110x_CTRL1], CTRL1_K, (REFCLOCK_MHz - 16));
+ STV6110x_SETFIELD(stv6110x->regs[STV6110x_CTRL1], CTRL1_K, (REFCLOCK_MHz - 16));
if (frequency <= 1023000) {
- STV6110x_SETFIELD(stv6110x_regs[STV6110x_TNG1], TNG1_DIV4SEL, 1);
- STV6110x_SETFIELD(stv6110x_regs[STV6110x_TNG1], TNG1_PRESC32_ON, 0);
+ STV6110x_SETFIELD(stv6110x->regs[STV6110x_TNG1], TNG1_DIV4SEL, 1);
+ STV6110x_SETFIELD(stv6110x->regs[STV6110x_TNG1], TNG1_PRESC32_ON, 0);
pVal = 40;
} else if (frequency <= 1300000) {
- STV6110x_SETFIELD(stv6110x_regs[STV6110x_TNG1], TNG1_DIV4SEL, 1);
- STV6110x_SETFIELD(stv6110x_regs[STV6110x_TNG1], TNG1_PRESC32_ON, 1);
+ STV6110x_SETFIELD(stv6110x->regs[STV6110x_TNG1], TNG1_DIV4SEL, 1);
+ STV6110x_SETFIELD(stv6110x->regs[STV6110x_TNG1], TNG1_PRESC32_ON, 1);
pVal = 40;
} else if (frequency <= 2046000) {
- STV6110x_SETFIELD(stv6110x_regs[STV6110x_TNG1], TNG1_DIV4SEL, 0);
- STV6110x_SETFIELD(stv6110x_regs[STV6110x_TNG1], TNG1_PRESC32_ON, 0);
+ STV6110x_SETFIELD(stv6110x->regs[STV6110x_TNG1], TNG1_DIV4SEL, 0);
+ STV6110x_SETFIELD(stv6110x->regs[STV6110x_TNG1], TNG1_PRESC32_ON, 0);
pVal = 20;
} else {
- STV6110x_SETFIELD(stv6110x_regs[STV6110x_TNG1], TNG1_DIV4SEL, 0);
- STV6110x_SETFIELD(stv6110x_regs[STV6110x_TNG1], TNG1_PRESC32_ON, 1);
+ STV6110x_SETFIELD(stv6110x->regs[STV6110x_TNG1], TNG1_DIV4SEL, 0);
+ STV6110x_SETFIELD(stv6110x->regs[STV6110x_TNG1], TNG1_PRESC32_ON, 1);
pVal = 20;
}
@@ -130,21 +142,21 @@
divider = (frequency * R_DIV(rDivOpt) * pVal) / REFCLOCK_kHz;
divider = (divider + 5) / 10;
- STV6110x_SETFIELD(stv6110x_regs[STV6110x_TNG1], TNG1_R_DIV, rDivOpt);
- STV6110x_SETFIELD(stv6110x_regs[STV6110x_TNG1], TNG1_N_DIV_11_8, MSB(divider));
- STV6110x_SETFIELD(stv6110x_regs[STV6110x_TNG0], TNG0_N_DIV_7_0, LSB(divider));
+ STV6110x_SETFIELD(stv6110x->regs[STV6110x_TNG1], TNG1_R_DIV, rDivOpt);
+ STV6110x_SETFIELD(stv6110x->regs[STV6110x_TNG1], TNG1_N_DIV_11_8, MSB(divider));
+ STV6110x_SETFIELD(stv6110x->regs[STV6110x_TNG0], TNG0_N_DIV_7_0, LSB(divider));
/* VCO Auto calibration */
- STV6110x_SETFIELD(stv6110x_regs[STV6110x_STAT1], STAT1_CALVCO_STRT, 1);
+ STV6110x_SETFIELD(stv6110x->regs[STV6110x_STAT1], STAT1_CALVCO_STRT, 1);
- stv6110x_write_reg(stv6110x, STV6110x_CTRL1, stv6110x_regs[STV6110x_CTRL1]);
- stv6110x_write_reg(stv6110x, STV6110x_TNG1, stv6110x_regs[STV6110x_TNG1]);
- stv6110x_write_reg(stv6110x, STV6110x_TNG0, stv6110x_regs[STV6110x_TNG0]);
- stv6110x_write_reg(stv6110x, STV6110x_STAT1, stv6110x_regs[STV6110x_STAT1]);
+ stv6110x_write_reg(stv6110x, STV6110x_CTRL1, stv6110x->regs[STV6110x_CTRL1]);
+ stv6110x_write_reg(stv6110x, STV6110x_TNG1, stv6110x->regs[STV6110x_TNG1]);
+ stv6110x_write_reg(stv6110x, STV6110x_TNG0, stv6110x->regs[STV6110x_TNG0]);
+ stv6110x_write_reg(stv6110x, STV6110x_STAT1, stv6110x->regs[STV6110x_STAT1]);
for (i = 0; i < TRIALS; i++) {
- stv6110x_read_reg(stv6110x, STV6110x_STAT1, &stv6110x_regs[STV6110x_STAT1]);
- if (!STV6110x_GETFIELD(STAT1_CALVCO_STRT, stv6110x_regs[STV6110x_STAT1]))
+ stv6110x_read_reg(stv6110x, STV6110x_STAT1, &stv6110x->regs[STV6110x_STAT1]);
+ if (!STV6110x_GETFIELD(STAT1_CALVCO_STRT, stv6110x->regs[STV6110x_STAT1]))
break;
msleep(1);
}
@@ -156,14 +168,14 @@
{
struct stv6110x_state *stv6110x = fe->tuner_priv;
- stv6110x_read_reg(stv6110x, STV6110x_TNG1, &stv6110x_regs[STV6110x_TNG1]);
- stv6110x_read_reg(stv6110x, STV6110x_TNG0, &stv6110x_regs[STV6110x_TNG0]);
+ stv6110x_read_reg(stv6110x, STV6110x_TNG1, &stv6110x->regs[STV6110x_TNG1]);
+ stv6110x_read_reg(stv6110x, STV6110x_TNG0, &stv6110x->regs[STV6110x_TNG0]);
- *frequency = (MAKEWORD16(STV6110x_GETFIELD(TNG1_N_DIV_11_8, stv6110x_regs[STV6110x_TNG1]),
- STV6110x_GETFIELD(TNG0_N_DIV_7_0, stv6110x_regs[STV6110x_TNG0]))) * REFCLOCK_kHz;
+ *frequency = (MAKEWORD16(STV6110x_GETFIELD(TNG1_N_DIV_11_8, stv6110x->regs[STV6110x_TNG1]),
+ STV6110x_GETFIELD(TNG0_N_DIV_7_0, stv6110x->regs[STV6110x_TNG0]))) * REFCLOCK_kHz;
- *frequency /= (1 << (STV6110x_GETFIELD(TNG1_R_DIV, stv6110x_regs[STV6110x_TNG1]) +
- STV6110x_GETFIELD(TNG1_DIV4SEL, stv6110x_regs[STV6110x_TNG1])));
+ *frequency /= (1 << (STV6110x_GETFIELD(TNG1_R_DIV, stv6110x->regs[STV6110x_TNG1]) +
+ STV6110x_GETFIELD(TNG1_DIV4SEL, stv6110x->regs[STV6110x_TNG1])));
*frequency >>= 2;
@@ -179,27 +191,27 @@
halfbw = bandwidth >> 1;
if (halfbw > 36000000)
- STV6110x_SETFIELD(stv6110x_regs[STV6110x_CTRL3], CTRL3_CF, 31); /* LPF */
+ STV6110x_SETFIELD(stv6110x->regs[STV6110x_CTRL3], CTRL3_CF, 31); /* LPF */
else if (halfbw < 5000000)
- STV6110x_SETFIELD(stv6110x_regs[STV6110x_CTRL3], CTRL3_CF, 0); /* LPF */
+ STV6110x_SETFIELD(stv6110x->regs[STV6110x_CTRL3], CTRL3_CF, 0); /* LPF */
else
- STV6110x_SETFIELD(stv6110x_regs[STV6110x_CTRL3], CTRL3_CF, ((halfbw / 1000000) - 5)); /* LPF */
+ STV6110x_SETFIELD(stv6110x->regs[STV6110x_CTRL3], CTRL3_CF, ((halfbw / 1000000) - 5)); /* LPF */
- STV6110x_SETFIELD(stv6110x_regs[STV6110x_CTRL3], CTRL3_RCCLK_OFF, 0x0); /* cal. clk activated */
- STV6110x_SETFIELD(stv6110x_regs[STV6110x_STAT1], STAT1_CALRC_STRT, 0x1); /* LPF auto cal */
+ STV6110x_SETFIELD(stv6110x->regs[STV6110x_CTRL3], CTRL3_RCCLK_OFF, 0x0); /* cal. clk activated */
+ STV6110x_SETFIELD(stv6110x->regs[STV6110x_STAT1], STAT1_CALRC_STRT, 0x1); /* LPF auto cal */
- stv6110x_write_reg(stv6110x, STV6110x_CTRL3, stv6110x_regs[STV6110x_CTRL3]);
- stv6110x_write_reg(stv6110x, STV6110x_STAT1, stv6110x_regs[STV6110x_STAT1]);
+ stv6110x_write_reg(stv6110x, STV6110x_CTRL3, stv6110x->regs[STV6110x_CTRL3]);
+ stv6110x_write_reg(stv6110x, STV6110x_STAT1, stv6110x->regs[STV6110x_STAT1]);
for (i = 0; i < TRIALS; i++) {
- stv6110x_read_reg(stv6110x, STV6110x_STAT1, &stv6110x_regs[STV6110x_STAT1]);
- if (!STV6110x_GETFIELD(STAT1_CALRC_STRT, stv6110x_regs[STV6110x_STAT1]))
+ stv6110x_read_reg(stv6110x, STV6110x_STAT1, &stv6110x->regs[STV6110x_STAT1]);
+ if (!STV6110x_GETFIELD(STAT1_CALRC_STRT, stv6110x->regs[STV6110x_STAT1]))
break;
msleep(1);
}
- STV6110x_SETFIELD(stv6110x_regs[STV6110x_CTRL3], CTRL3_RCCLK_OFF, 0x1); /* cal. done */
- stv6110x_write_reg(stv6110x, STV6110x_CTRL3, stv6110x_regs[STV6110x_CTRL3]);
+ STV6110x_SETFIELD(stv6110x->regs[STV6110x_CTRL3], CTRL3_RCCLK_OFF, 0x1); /* cal. done */
+ stv6110x_write_reg(stv6110x, STV6110x_CTRL3, stv6110x->regs[STV6110x_CTRL3]);
return 0;
}
@@ -208,8 +220,8 @@
{
struct stv6110x_state *stv6110x = fe->tuner_priv;
- stv6110x_read_reg(stv6110x, STV6110x_CTRL3, &stv6110x_regs[STV6110x_CTRL3]);
- *bandwidth = (STV6110x_GETFIELD(CTRL3_CF, stv6110x_regs[STV6110x_CTRL3]) + 5) * 2000000;
+ stv6110x_read_reg(stv6110x, STV6110x_CTRL3, &stv6110x->regs[STV6110x_CTRL3]);
+ *bandwidth = (STV6110x_GETFIELD(CTRL3_CF, stv6110x->regs[STV6110x_CTRL3]) + 5) * 2000000;
return 0;
}
@@ -222,20 +234,20 @@
switch (refclock) {
default:
case 1:
- STV6110x_SETFIELD(stv6110x_regs[STV6110x_CTRL2], CTRL2_CO_DIV, 0);
+ STV6110x_SETFIELD(stv6110x->regs[STV6110x_CTRL2], CTRL2_CO_DIV, 0);
break;
case 2:
- STV6110x_SETFIELD(stv6110x_regs[STV6110x_CTRL2], CTRL2_CO_DIV, 1);
+ STV6110x_SETFIELD(stv6110x->regs[STV6110x_CTRL2], CTRL2_CO_DIV, 1);
break;
case 4:
- STV6110x_SETFIELD(stv6110x_regs[STV6110x_CTRL2], CTRL2_CO_DIV, 2);
+ STV6110x_SETFIELD(stv6110x->regs[STV6110x_CTRL2], CTRL2_CO_DIV, 2);
break;
case 8:
case 0:
- STV6110x_SETFIELD(stv6110x_regs[STV6110x_CTRL2], CTRL2_CO_DIV, 3);
+ STV6110x_SETFIELD(stv6110x->regs[STV6110x_CTRL2], CTRL2_CO_DIV, 3);
break;
}
- stv6110x_write_reg(stv6110x, STV6110x_CTRL2, stv6110x_regs[STV6110x_CTRL2]);
+ stv6110x_write_reg(stv6110x, STV6110x_CTRL2, stv6110x->regs[STV6110x_CTRL2]);
return 0;
}
@@ -244,8 +256,8 @@
{
struct stv6110x_state *stv6110x = fe->tuner_priv;
- stv6110x_read_reg(stv6110x, STV6110x_CTRL2, &stv6110x_regs[STV6110x_CTRL2]);
- *gain = 2 * STV6110x_GETFIELD(CTRL2_BBGAIN, stv6110x_regs[STV6110x_CTRL2]);
+ stv6110x_read_reg(stv6110x, STV6110x_CTRL2, &stv6110x->regs[STV6110x_CTRL2]);
+ *gain = 2 * STV6110x_GETFIELD(CTRL2_BBGAIN, stv6110x->regs[STV6110x_CTRL2]);
return 0;
}
@@ -254,8 +266,8 @@
{
struct stv6110x_state *stv6110x = fe->tuner_priv;
- STV6110x_SETFIELD(stv6110x_regs[STV6110x_CTRL2], CTRL2_BBGAIN, gain / 2);
- stv6110x_write_reg(stv6110x, STV6110x_CTRL2, stv6110x_regs[STV6110x_CTRL2]);
+ STV6110x_SETFIELD(stv6110x->regs[STV6110x_CTRL2], CTRL2_BBGAIN, gain / 2);
+ stv6110x_write_reg(stv6110x, STV6110x_CTRL2, stv6110x->regs[STV6110x_CTRL2]);
return 0;
}
@@ -267,19 +279,19 @@
switch (mode) {
case TUNER_SLEEP:
- STV6110x_SETFIELD(stv6110x_regs[STV6110x_CTRL1], CTRL1_SYN, 0);
- STV6110x_SETFIELD(stv6110x_regs[STV6110x_CTRL1], CTRL1_RX, 0);
- STV6110x_SETFIELD(stv6110x_regs[STV6110x_CTRL1], CTRL1_LPT, 0);
+ STV6110x_SETFIELD(stv6110x->regs[STV6110x_CTRL1], CTRL1_SYN, 0);
+ STV6110x_SETFIELD(stv6110x->regs[STV6110x_CTRL1], CTRL1_RX, 0);
+ STV6110x_SETFIELD(stv6110x->regs[STV6110x_CTRL1], CTRL1_LPT, 0);
break;
case TUNER_WAKE:
- STV6110x_SETFIELD(stv6110x_regs[STV6110x_CTRL1], CTRL1_SYN, 1);
- STV6110x_SETFIELD(stv6110x_regs[STV6110x_CTRL1], CTRL1_RX, 1);
- STV6110x_SETFIELD(stv6110x_regs[STV6110x_CTRL1], CTRL1_LPT, 1);
+ STV6110x_SETFIELD(stv6110x->regs[STV6110x_CTRL1], CTRL1_SYN, 1);
+ STV6110x_SETFIELD(stv6110x->regs[STV6110x_CTRL1], CTRL1_RX, 1);
+ STV6110x_SETFIELD(stv6110x->regs[STV6110x_CTRL1], CTRL1_LPT, 1);
break;
}
- ret = stv6110x_write_reg(stv6110x, STV6110x_CTRL1, stv6110x_regs[STV6110x_CTRL1]);
+ ret = stv6110x_write_reg(stv6110x, STV6110x_CTRL1, stv6110x->regs[STV6110x_CTRL1]);
if (ret < 0) {
dprintk(FE_ERROR, 1, "I/O Error");
return -EIO;
@@ -297,9 +309,9 @@
{
struct stv6110x_state *stv6110x = fe->tuner_priv;
- stv6110x_read_reg(stv6110x, STV6110x_STAT1, &stv6110x_regs[STV6110x_STAT1]);
+ stv6110x_read_reg(stv6110x, STV6110x_STAT1, &stv6110x->regs[STV6110x_STAT1]);
- if (STV6110x_GETFIELD(STAT1_LOCK, stv6110x_regs[STV6110x_STAT1]))
+ if (STV6110x_GETFIELD(STAT1_LOCK, stv6110x->regs[STV6110x_STAT1]))
*status = TUNER_PHASELOCKED;
else
*status = 0;
@@ -349,6 +361,8 @@
struct i2c_adapter *i2c)
{
struct stv6110x_state *stv6110x;
+ u8 default_regs[] = {0x07, 0x11, 0xdc, 0x85, 0x17, 0x01, 0xe6, 0x1e};
+ int ret;
stv6110x = kzalloc(sizeof (struct stv6110x_state), GFP_KERNEL);
if (stv6110x == NULL)
@@ -357,6 +371,44 @@
stv6110x->i2c = i2c;
stv6110x->config = config;
stv6110x->devctl = &stv6110x_ctl;
+ memcpy(stv6110x->regs, default_regs, 8);
+
+ /* setup divider */
+ switch (stv6110x->config->clk_div) {
+ default:
+ case 1:
+ STV6110x_SETFIELD(stv6110x->regs[STV6110x_CTRL2], CTRL2_CO_DIV, 0);
+ break;
+ case 2:
+ STV6110x_SETFIELD(stv6110x->regs[STV6110x_CTRL2], CTRL2_CO_DIV, 1);
+ break;
+ case 4:
+ STV6110x_SETFIELD(stv6110x->regs[STV6110x_CTRL2], CTRL2_CO_DIV, 2);
+ break;
+ case 8:
+ case 0:
+ STV6110x_SETFIELD(stv6110x->regs[STV6110x_CTRL2], CTRL2_CO_DIV, 3);
+ break;
+ }
+
+ if (fe->ops.i2c_gate_ctrl) {
+ ret = fe->ops.i2c_gate_ctrl(fe, 1);
+ if (ret < 0)
+ goto error;
+ }
+
+ ret = stv6110x_write_regs(stv6110x, 0, stv6110x->regs,
+ ARRAY_SIZE(stv6110x->regs));
+ if (ret < 0) {
+ dprintk(FE_ERROR, 1, "Initialization failed");
+ goto error;
+ }
+
+ if (fe->ops.i2c_gate_ctrl) {
+ ret = fe->ops.i2c_gate_ctrl(fe, 0);
+ if (ret < 0)
+ goto error;
+ }
fe->tuner_priv = stv6110x;
fe->ops.tuner_ops = stv6110x_ops;
diff --git a/drivers/media/dvb/frontends/stv6110x.h b/drivers/media/dvb/frontends/stv6110x.h
index a382570..2429ae6 100644
--- a/drivers/media/dvb/frontends/stv6110x.h
+++ b/drivers/media/dvb/frontends/stv6110x.h
@@ -26,6 +26,7 @@
struct stv6110x_config {
u8 addr;
u32 refclk;
+ u8 clk_div; /* divisor value for the output clock */
};
enum tuner_mode {
diff --git a/drivers/media/dvb/frontends/stv6110x_priv.h b/drivers/media/dvb/frontends/stv6110x_priv.h
index 7260da6..0ec936a 100644
--- a/drivers/media/dvb/frontends/stv6110x_priv.h
+++ b/drivers/media/dvb/frontends/stv6110x_priv.h
@@ -68,6 +68,7 @@
struct stv6110x_state {
struct i2c_adapter *i2c;
const struct stv6110x_config *config;
+ u8 regs[8];
struct stv6110x_devctl *devctl;
};
diff --git a/drivers/media/dvb/frontends/tda665x.c b/drivers/media/dvb/frontends/tda665x.c
index 87d5273..c44fefe 100644
--- a/drivers/media/dvb/frontends/tda665x.c
+++ b/drivers/media/dvb/frontends/tda665x.c
@@ -133,7 +133,7 @@
frequency += config->ref_divider >> 1;
frequency /= config->ref_divider;
- buf[0] = (u8) (frequency & 0x7f00) >> 8;
+ buf[0] = (u8) ((frequency & 0x7f00) >> 8);
buf[1] = (u8) (frequency & 0x00ff) >> 0;
buf[2] = 0x80 | 0x40 | 0x02;
buf[3] = 0x00;
diff --git a/drivers/media/dvb/frontends/tda8261.c b/drivers/media/dvb/frontends/tda8261.c
index 320c3c3..614afce 100644
--- a/drivers/media/dvb/frontends/tda8261.c
+++ b/drivers/media/dvb/frontends/tda8261.c
@@ -39,7 +39,7 @@
{
const struct tda8261_config *config = state->config;
int err = 0;
- struct i2c_msg msg = { .addr = config->addr, .flags = I2C_M_RD,.buf = buf, .len = 2 };
+ struct i2c_msg msg = { .addr = config->addr, .flags = I2C_M_RD,.buf = buf, .len = 1 };
if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1)
printk("%s: read error, err=%d\n", __func__, err);
diff --git a/drivers/media/dvb/frontends/zl10036.c b/drivers/media/dvb/frontends/zl10036.c
index 4e814ff..34c5de4 100644
--- a/drivers/media/dvb/frontends/zl10036.c
+++ b/drivers/media/dvb/frontends/zl10036.c
@@ -411,7 +411,7 @@
state->bf = 0xff;
if (!state->config->rf_loop_enable)
- zl10036_init_tab[1][2] |= 0x01;
+ zl10036_init_tab[1][0] |= 0x01;
deb_info("%s\n", __func__);
diff --git a/drivers/media/dvb/frontends/zl10039.c b/drivers/media/dvb/frontends/zl10039.c
index 11b29cb..c085e58 100644
--- a/drivers/media/dvb/frontends/zl10039.c
+++ b/drivers/media/dvb/frontends/zl10039.c
@@ -287,7 +287,6 @@
break;
default:
dprintk("Chip ID=%x does not match a known type\n", state->id);
- break;
goto error;
}
diff --git a/drivers/media/dvb/mantis/mantis_hif.c b/drivers/media/dvb/mantis/mantis_hif.c
index 7477dac..5772ebb 100644
--- a/drivers/media/dvb/mantis/mantis_hif.c
+++ b/drivers/media/dvb/mantis/mantis_hif.c
@@ -22,8 +22,6 @@
#include <linux/signal.h>
#include <linux/sched.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
#include <linux/interrupt.h>
#include "dmxdev.h"
diff --git a/drivers/media/dvb/mantis/mantis_input.c b/drivers/media/dvb/mantis/mantis_input.c
index 6a9df77..4675a3b 100644
--- a/drivers/media/dvb/mantis/mantis_input.c
+++ b/drivers/media/dvb/mantis/mantis_input.c
@@ -126,7 +126,7 @@
rc->id.version = 1;
rc->dev = mantis->pdev->dev;
- err = ir_input_register(rc, &ir_mantis);
+ err = ir_input_register(rc, &ir_mantis, NULL);
if (err) {
dprintk(MANTIS_ERROR, 1, "IR device registration failed, ret = %d", err);
input_free_device(rc);
diff --git a/drivers/media/dvb/mantis/mantis_pci.c b/drivers/media/dvb/mantis/mantis_pci.c
index 6c7534a..59feeb8 100644
--- a/drivers/media/dvb/mantis/mantis_pci.c
+++ b/drivers/media/dvb/mantis/mantis_pci.c
@@ -41,11 +41,6 @@
#include "dvb_frontend.h"
#include "dvb_net.h"
-#include <asm/irq.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-
#include "mantis_common.h"
#include "mantis_reg.h"
#include "mantis_pci.h"
diff --git a/drivers/media/dvb/ngene/Kconfig b/drivers/media/dvb/ngene/Kconfig
new file mode 100644
index 0000000..3ec8e6f
--- /dev/null
+++ b/drivers/media/dvb/ngene/Kconfig
@@ -0,0 +1,9 @@
+config DVB_NGENE
+ tristate "Micronas nGene support"
+ depends on DVB_CORE && PCI && I2C
+ select DVB_LNBP21 if !DVB_FE_CUSTOMISE
+ select DVB_STV6110x if !DVB_FE_CUSTOMISE
+ select DVB_STV090x if !DVB_FE_CUSTOMISE
+ ---help---
+ Support for Micronas PCI express cards with nGene bridge.
+
diff --git a/drivers/media/dvb/ngene/Makefile b/drivers/media/dvb/ngene/Makefile
new file mode 100644
index 0000000..40435ca
--- /dev/null
+++ b/drivers/media/dvb/ngene/Makefile
@@ -0,0 +1,11 @@
+#
+# Makefile for the nGene device driver
+#
+
+ngene-objs := ngene-core.o
+
+obj-$(CONFIG_DVB_NGENE) += ngene.o
+
+EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core/
+EXTRA_CFLAGS += -Idrivers/media/dvb/frontends/
+
diff --git a/drivers/media/dvb/ngene/ngene-core.c b/drivers/media/dvb/ngene/ngene-core.c
new file mode 100644
index 0000000..0150dfe
--- /dev/null
+++ b/drivers/media/dvb/ngene/ngene-core.c
@@ -0,0 +1,2024 @@
+/*
+ * ngene.c: nGene PCIe bridge driver
+ *
+ * Copyright (C) 2005-2007 Micronas
+ *
+ * Copyright (C) 2008-2009 Ralph Metzler <rjkm@metzlerbros.de>
+ * Modifications for new nGene firmware,
+ * support for EEPROM-copying,
+ * support for new dual DVB-S2 card prototype
+ *
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 only, as published by the Free Software Foundation.
+ *
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA
+ * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/poll.h>
+#include <linux/io.h>
+#include <asm/div64.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/smp_lock.h>
+#include <linux/timer.h>
+#include <linux/version.h>
+#include <linux/byteorder/generic.h>
+#include <linux/firmware.h>
+#include <linux/vmalloc.h>
+
+#include "ngene.h"
+
+#include "stv6110x.h"
+#include "stv090x.h"
+#include "lnbh24.h"
+
+static int one_adapter = 1;
+module_param(one_adapter, int, 0444);
+MODULE_PARM_DESC(one_adapter, "Use only one adapter.");
+
+
+static int debug;
+module_param(debug, int, 0444);
+MODULE_PARM_DESC(debug, "Print debugging information.");
+
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+#define COMMAND_TIMEOUT_WORKAROUND
+
+#define dprintk if (debug) printk
+
+#define DEVICE_NAME "ngene"
+
+#define ngwriteb(dat, adr) writeb((dat), (char *)(dev->iomem + (adr)))
+#define ngwritel(dat, adr) writel((dat), (char *)(dev->iomem + (adr)))
+#define ngwriteb(dat, adr) writeb((dat), (char *)(dev->iomem + (adr)))
+#define ngreadl(adr) readl(dev->iomem + (adr))
+#define ngreadb(adr) readb(dev->iomem + (adr))
+#define ngcpyto(adr, src, count) memcpy_toio((char *) \
+ (dev->iomem + (adr)), (src), (count))
+#define ngcpyfrom(dst, adr, count) memcpy_fromio((dst), (char *) \
+ (dev->iomem + (adr)), (count))
+
+/****************************************************************************/
+/* nGene interrupt handler **************************************************/
+/****************************************************************************/
+
+static void event_tasklet(unsigned long data)
+{
+ struct ngene *dev = (struct ngene *)data;
+
+ while (dev->EventQueueReadIndex != dev->EventQueueWriteIndex) {
+ struct EVENT_BUFFER Event =
+ dev->EventQueue[dev->EventQueueReadIndex];
+ dev->EventQueueReadIndex =
+ (dev->EventQueueReadIndex + 1) & (EVENT_QUEUE_SIZE - 1);
+
+ if ((Event.UARTStatus & 0x01) && (dev->TxEventNotify))
+ dev->TxEventNotify(dev, Event.TimeStamp);
+ if ((Event.UARTStatus & 0x02) && (dev->RxEventNotify))
+ dev->RxEventNotify(dev, Event.TimeStamp,
+ Event.RXCharacter);
+ }
+}
+
+static void demux_tasklet(unsigned long data)
+{
+ struct ngene_channel *chan = (struct ngene_channel *)data;
+ struct SBufferHeader *Cur = chan->nextBuffer;
+
+ spin_lock_irq(&chan->state_lock);
+
+ while (Cur->ngeneBuffer.SR.Flags & 0x80) {
+ if (chan->mode & NGENE_IO_TSOUT) {
+ u32 Flags = chan->DataFormatFlags;
+ if (Cur->ngeneBuffer.SR.Flags & 0x20)
+ Flags |= BEF_OVERFLOW;
+ if (chan->pBufferExchange) {
+ if (!chan->pBufferExchange(chan,
+ Cur->Buffer1,
+ chan->Capture1Length,
+ Cur->ngeneBuffer.SR.
+ Clock, Flags)) {
+ /*
+ We didn't get data
+ Clear in service flag to make sure we
+ get called on next interrupt again.
+ leave fill/empty (0x80) flag alone
+ to avoid hardware running out of
+ buffers during startup, we hold only
+ in run state ( the source may be late
+ delivering data )
+ */
+
+ if (chan->HWState == HWSTATE_RUN) {
+ Cur->ngeneBuffer.SR.Flags &=
+ ~0x40;
+ break;
+ /* Stop proccessing stream */
+ }
+ } else {
+ /* We got a valid buffer,
+ so switch to run state */
+ chan->HWState = HWSTATE_RUN;
+ }
+ } else {
+ printk(KERN_ERR DEVICE_NAME ": OOPS\n");
+ if (chan->HWState == HWSTATE_RUN) {
+ Cur->ngeneBuffer.SR.Flags &= ~0x40;
+ break; /* Stop proccessing stream */
+ }
+ }
+ if (chan->AudioDTOUpdated) {
+ printk(KERN_INFO DEVICE_NAME
+ ": Update AudioDTO = %d\n",
+ chan->AudioDTOValue);
+ Cur->ngeneBuffer.SR.DTOUpdate =
+ chan->AudioDTOValue;
+ chan->AudioDTOUpdated = 0;
+ }
+ } else {
+ if (chan->HWState == HWSTATE_RUN) {
+ u32 Flags = 0;
+ if (Cur->ngeneBuffer.SR.Flags & 0x01)
+ Flags |= BEF_EVEN_FIELD;
+ if (Cur->ngeneBuffer.SR.Flags & 0x20)
+ Flags |= BEF_OVERFLOW;
+ if (chan->pBufferExchange)
+ chan->pBufferExchange(chan,
+ Cur->Buffer1,
+ chan->
+ Capture1Length,
+ Cur->ngeneBuffer.
+ SR.Clock, Flags);
+ if (chan->pBufferExchange2)
+ chan->pBufferExchange2(chan,
+ Cur->Buffer2,
+ chan->
+ Capture2Length,
+ Cur->ngeneBuffer.
+ SR.Clock, Flags);
+ } else if (chan->HWState != HWSTATE_STOP)
+ chan->HWState = HWSTATE_RUN;
+ }
+ Cur->ngeneBuffer.SR.Flags = 0x00;
+ Cur = Cur->Next;
+ }
+ chan->nextBuffer = Cur;
+
+ spin_unlock_irq(&chan->state_lock);
+}
+
+static irqreturn_t irq_handler(int irq, void *dev_id)
+{
+ struct ngene *dev = (struct ngene *)dev_id;
+ u32 icounts = 0;
+ irqreturn_t rc = IRQ_NONE;
+ u32 i = MAX_STREAM;
+ u8 *tmpCmdDoneByte;
+
+ if (dev->BootFirmware) {
+ icounts = ngreadl(NGENE_INT_COUNTS);
+ if (icounts != dev->icounts) {
+ ngwritel(0, FORCE_NMI);
+ dev->cmd_done = 1;
+ wake_up(&dev->cmd_wq);
+ dev->icounts = icounts;
+ rc = IRQ_HANDLED;
+ }
+ return rc;
+ }
+
+ ngwritel(0, FORCE_NMI);
+
+ spin_lock(&dev->cmd_lock);
+ tmpCmdDoneByte = dev->CmdDoneByte;
+ if (tmpCmdDoneByte &&
+ (*tmpCmdDoneByte ||
+ (dev->ngenetohost[0] == 1 && dev->ngenetohost[1] != 0))) {
+ dev->CmdDoneByte = NULL;
+ dev->cmd_done = 1;
+ wake_up(&dev->cmd_wq);
+ rc = IRQ_HANDLED;
+ }
+ spin_unlock(&dev->cmd_lock);
+
+ if (dev->EventBuffer->EventStatus & 0x80) {
+ u8 nextWriteIndex =
+ (dev->EventQueueWriteIndex + 1) &
+ (EVENT_QUEUE_SIZE - 1);
+ if (nextWriteIndex != dev->EventQueueReadIndex) {
+ dev->EventQueue[dev->EventQueueWriteIndex] =
+ *(dev->EventBuffer);
+ dev->EventQueueWriteIndex = nextWriteIndex;
+ } else {
+ printk(KERN_ERR DEVICE_NAME ": event overflow\n");
+ dev->EventQueueOverflowCount += 1;
+ dev->EventQueueOverflowFlag = 1;
+ }
+ dev->EventBuffer->EventStatus &= ~0x80;
+ tasklet_schedule(&dev->event_tasklet);
+ rc = IRQ_HANDLED;
+ }
+
+ while (i > 0) {
+ i--;
+ spin_lock(&dev->channel[i].state_lock);
+ /* if (dev->channel[i].State>=KSSTATE_RUN) { */
+ if (dev->channel[i].nextBuffer) {
+ if ((dev->channel[i].nextBuffer->
+ ngeneBuffer.SR.Flags & 0xC0) == 0x80) {
+ dev->channel[i].nextBuffer->
+ ngeneBuffer.SR.Flags |= 0x40;
+ tasklet_schedule(
+ &dev->channel[i].demux_tasklet);
+ rc = IRQ_HANDLED;
+ }
+ }
+ spin_unlock(&dev->channel[i].state_lock);
+ }
+
+ /* Request might have been processed by a previous call. */
+ return IRQ_HANDLED;
+}
+
+/****************************************************************************/
+/* nGene command interface **************************************************/
+/****************************************************************************/
+
+static void dump_command_io(struct ngene *dev)
+{
+ u8 buf[8], *b;
+
+ ngcpyfrom(buf, HOST_TO_NGENE, 8);
+ printk(KERN_ERR "host_to_ngene (%04x): %02x %02x %02x %02x %02x %02x %02x %02x\n",
+ HOST_TO_NGENE, buf[0], buf[1], buf[2], buf[3],
+ buf[4], buf[5], buf[6], buf[7]);
+
+ ngcpyfrom(buf, NGENE_TO_HOST, 8);
+ printk(KERN_ERR "ngene_to_host (%04x): %02x %02x %02x %02x %02x %02x %02x %02x\n",
+ NGENE_TO_HOST, buf[0], buf[1], buf[2], buf[3],
+ buf[4], buf[5], buf[6], buf[7]);
+
+ b = dev->hosttongene;
+ printk(KERN_ERR "dev->hosttongene (%p): %02x %02x %02x %02x %02x %02x %02x %02x\n",
+ b, b[0], b[1], b[2], b[3], b[4], b[5], b[6], b[7]);
+
+ b = dev->ngenetohost;
+ printk(KERN_ERR "dev->ngenetohost (%p): %02x %02x %02x %02x %02x %02x %02x %02x\n",
+ b, b[0], b[1], b[2], b[3], b[4], b[5], b[6], b[7]);
+}
+
+static int ngene_command_mutex(struct ngene *dev, struct ngene_command *com)
+{
+ int ret;
+ u8 *tmpCmdDoneByte;
+
+ dev->cmd_done = 0;
+
+ if (com->cmd.hdr.Opcode == CMD_FWLOAD_PREPARE) {
+ dev->BootFirmware = 1;
+ dev->icounts = ngreadl(NGENE_INT_COUNTS);
+ ngwritel(0, NGENE_COMMAND);
+ ngwritel(0, NGENE_COMMAND_HI);
+ ngwritel(0, NGENE_STATUS);
+ ngwritel(0, NGENE_STATUS_HI);
+ ngwritel(0, NGENE_EVENT);
+ ngwritel(0, NGENE_EVENT_HI);
+ } else if (com->cmd.hdr.Opcode == CMD_FWLOAD_FINISH) {
+ u64 fwio = dev->PAFWInterfaceBuffer;
+
+ ngwritel(fwio & 0xffffffff, NGENE_COMMAND);
+ ngwritel(fwio >> 32, NGENE_COMMAND_HI);
+ ngwritel((fwio + 256) & 0xffffffff, NGENE_STATUS);
+ ngwritel((fwio + 256) >> 32, NGENE_STATUS_HI);
+ ngwritel((fwio + 512) & 0xffffffff, NGENE_EVENT);
+ ngwritel((fwio + 512) >> 32, NGENE_EVENT_HI);
+ }
+
+ memcpy(dev->FWInterfaceBuffer, com->cmd.raw8, com->in_len + 2);
+
+ if (dev->BootFirmware)
+ ngcpyto(HOST_TO_NGENE, com->cmd.raw8, com->in_len + 2);
+
+ spin_lock_irq(&dev->cmd_lock);
+ tmpCmdDoneByte = dev->ngenetohost + com->out_len;
+ if (!com->out_len)
+ tmpCmdDoneByte++;
+ *tmpCmdDoneByte = 0;
+ dev->ngenetohost[0] = 0;
+ dev->ngenetohost[1] = 0;
+ dev->CmdDoneByte = tmpCmdDoneByte;
+ spin_unlock_irq(&dev->cmd_lock);
+
+ /* Notify 8051. */
+ ngwritel(1, FORCE_INT);
+
+ ret = wait_event_timeout(dev->cmd_wq, dev->cmd_done == 1, 2 * HZ);
+ if (!ret) {
+ /*ngwritel(0, FORCE_NMI);*/
+
+ printk(KERN_ERR DEVICE_NAME
+ ": Command timeout cmd=%02x prev=%02x\n",
+ com->cmd.hdr.Opcode, dev->prev_cmd);
+ dump_command_io(dev);
+ return -1;
+ }
+ if (com->cmd.hdr.Opcode == CMD_FWLOAD_FINISH)
+ dev->BootFirmware = 0;
+
+ dev->prev_cmd = com->cmd.hdr.Opcode;
+
+ if (!com->out_len)
+ return 0;
+
+ memcpy(com->cmd.raw8, dev->ngenetohost, com->out_len);
+
+ return 0;
+}
+
+static int ngene_command(struct ngene *dev, struct ngene_command *com)
+{
+ int result;
+
+ down(&dev->cmd_mutex);
+ result = ngene_command_mutex(dev, com);
+ up(&dev->cmd_mutex);
+ return result;
+}
+
+
+static int ngene_command_i2c_read(struct ngene *dev, u8 adr,
+ u8 *out, u8 outlen, u8 *in, u8 inlen, int flag)
+{
+ struct ngene_command com;
+
+ com.cmd.hdr.Opcode = CMD_I2C_READ;
+ com.cmd.hdr.Length = outlen + 3;
+ com.cmd.I2CRead.Device = adr << 1;
+ memcpy(com.cmd.I2CRead.Data, out, outlen);
+ com.cmd.I2CRead.Data[outlen] = inlen;
+ com.cmd.I2CRead.Data[outlen + 1] = 0;
+ com.in_len = outlen + 3;
+ com.out_len = inlen + 1;
+
+ if (ngene_command(dev, &com) < 0)
+ return -EIO;
+
+ if ((com.cmd.raw8[0] >> 1) != adr)
+ return -EIO;
+
+ if (flag)
+ memcpy(in, com.cmd.raw8, inlen + 1);
+ else
+ memcpy(in, com.cmd.raw8 + 1, inlen);
+ return 0;
+}
+
+static int ngene_command_i2c_write(struct ngene *dev, u8 adr,
+ u8 *out, u8 outlen)
+{
+ struct ngene_command com;
+
+
+ com.cmd.hdr.Opcode = CMD_I2C_WRITE;
+ com.cmd.hdr.Length = outlen + 1;
+ com.cmd.I2CRead.Device = adr << 1;
+ memcpy(com.cmd.I2CRead.Data, out, outlen);
+ com.in_len = outlen + 1;
+ com.out_len = 1;
+
+ if (ngene_command(dev, &com) < 0)
+ return -EIO;
+
+ if (com.cmd.raw8[0] == 1)
+ return -EIO;
+
+ return 0;
+}
+
+static int ngene_command_load_firmware(struct ngene *dev,
+ u8 *ngene_fw, u32 size)
+{
+#define FIRSTCHUNK (1024)
+ u32 cleft;
+ struct ngene_command com;
+
+ com.cmd.hdr.Opcode = CMD_FWLOAD_PREPARE;
+ com.cmd.hdr.Length = 0;
+ com.in_len = 0;
+ com.out_len = 0;
+
+ ngene_command(dev, &com);
+
+ cleft = (size + 3) & ~3;
+ if (cleft > FIRSTCHUNK) {
+ ngcpyto(PROGRAM_SRAM + FIRSTCHUNK, ngene_fw + FIRSTCHUNK,
+ cleft - FIRSTCHUNK);
+ cleft = FIRSTCHUNK;
+ }
+ ngcpyto(DATA_FIFO_AREA, ngene_fw, cleft);
+
+ memset(&com, 0, sizeof(struct ngene_command));
+ com.cmd.hdr.Opcode = CMD_FWLOAD_FINISH;
+ com.cmd.hdr.Length = 4;
+ com.cmd.FWLoadFinish.Address = DATA_FIFO_AREA;
+ com.cmd.FWLoadFinish.Length = (unsigned short)cleft;
+ com.in_len = 4;
+ com.out_len = 0;
+
+ return ngene_command(dev, &com);
+}
+
+
+static int ngene_command_config_buf(struct ngene *dev, u8 config)
+{
+ struct ngene_command com;
+
+ com.cmd.hdr.Opcode = CMD_CONFIGURE_BUFFER;
+ com.cmd.hdr.Length = 1;
+ com.cmd.ConfigureBuffers.config = config;
+ com.in_len = 1;
+ com.out_len = 0;
+
+ if (ngene_command(dev, &com) < 0)
+ return -EIO;
+ return 0;
+}
+
+static int ngene_command_config_free_buf(struct ngene *dev, u8 *config)
+{
+ struct ngene_command com;
+
+ com.cmd.hdr.Opcode = CMD_CONFIGURE_FREE_BUFFER;
+ com.cmd.hdr.Length = 6;
+ memcpy(&com.cmd.ConfigureBuffers.config, config, 6);
+ com.in_len = 6;
+ com.out_len = 0;
+
+ if (ngene_command(dev, &com) < 0)
+ return -EIO;
+
+ return 0;
+}
+
+static int ngene_command_gpio_set(struct ngene *dev, u8 select, u8 level)
+{
+ struct ngene_command com;
+
+ com.cmd.hdr.Opcode = CMD_SET_GPIO_PIN;
+ com.cmd.hdr.Length = 1;
+ com.cmd.SetGpioPin.select = select | (level << 7);
+ com.in_len = 1;
+ com.out_len = 0;
+
+ return ngene_command(dev, &com);
+}
+
+
+/*
+ 02000640 is sample on rising edge.
+ 02000740 is sample on falling edge.
+ 02000040 is ignore "valid" signal
+
+ 0: FD_CTL1 Bit 7,6 must be 0,1
+ 7 disable(fw controlled)
+ 6 0-AUX,1-TS
+ 5 0-par,1-ser
+ 4 0-lsb/1-msb
+ 3,2 reserved
+ 1,0 0-no sync, 1-use ext. start, 2-use 0x47, 3-both
+ 1: FD_CTL2 has 3-valid must be hi, 2-use valid, 1-edge
+ 2: FD_STA is read-only. 0-sync
+ 3: FD_INSYNC is number of 47s to trigger "in sync".
+ 4: FD_OUTSYNC is number of 47s to trigger "out of sync".
+ 5: FD_MAXBYTE1 is low-order of bytes per packet.
+ 6: FD_MAXBYTE2 is high-order of bytes per packet.
+ 7: Top byte is unused.
+*/
+
+/****************************************************************************/
+
+static u8 TSFeatureDecoderSetup[8 * 4] = {
+ 0x42, 0x00, 0x00, 0x02, 0x02, 0xbc, 0x00, 0x00,
+ 0x40, 0x06, 0x00, 0x02, 0x02, 0xbc, 0x00, 0x00, /* DRXH */
+ 0x71, 0x07, 0x00, 0x02, 0x02, 0xbc, 0x00, 0x00, /* DRXHser */
+ 0x72, 0x06, 0x00, 0x02, 0x02, 0xbc, 0x00, 0x00, /* S2ser */
+};
+
+/* Set NGENE I2S Config to 16 bit packed */
+static u8 I2SConfiguration[] = {
+ 0x00, 0x10, 0x00, 0x00,
+ 0x80, 0x10, 0x00, 0x00,
+};
+
+static u8 SPDIFConfiguration[10] = {
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
+};
+
+/* Set NGENE I2S Config to transport stream compatible mode */
+
+static u8 TS_I2SConfiguration[4] = { 0x3E, 0x1A, 0x00, 0x00 }; /*3e 18 00 00 ?*/
+
+static u8 TS_I2SOutConfiguration[4] = { 0x80, 0x20, 0x00, 0x00 };
+
+static u8 ITUDecoderSetup[4][16] = {
+ {0x1c, 0x13, 0x01, 0x68, 0x3d, 0x90, 0x14, 0x20, /* SDTV */
+ 0x00, 0x00, 0x01, 0xb0, 0x9c, 0x00, 0x00, 0x00},
+ {0x9c, 0x03, 0x23, 0xC0, 0x60, 0x0E, 0x13, 0x00,
+ 0x00, 0x00, 0x00, 0x01, 0xB0, 0x00, 0x00, 0x00},
+ {0x9f, 0x00, 0x23, 0xC0, 0x60, 0x0F, 0x13, 0x00, /* HDTV 1080i50 */
+ 0x00, 0x00, 0x00, 0x01, 0xB0, 0x00, 0x00, 0x00},
+ {0x9c, 0x01, 0x23, 0xC0, 0x60, 0x0E, 0x13, 0x00, /* HDTV 1080i60 */
+ 0x00, 0x00, 0x00, 0x01, 0xB0, 0x00, 0x00, 0x00},
+};
+
+/*
+ * 50 48 60 gleich
+ * 27p50 9f 00 22 80 42 69 18 ...
+ * 27p60 93 00 22 80 82 69 1c ...
+ */
+
+/* Maxbyte to 1144 (for raw data) */
+static u8 ITUFeatureDecoderSetup[8] = {
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x04, 0x00
+};
+
+static void FillTSBuffer(void *Buffer, int Length, u32 Flags)
+{
+ u32 *ptr = Buffer;
+
+ memset(Buffer, 0xff, Length);
+ while (Length > 0) {
+ if (Flags & DF_SWAP32)
+ *ptr = 0x471FFF10;
+ else
+ *ptr = 0x10FF1F47;
+ ptr += (188 / 4);
+ Length -= 188;
+ }
+}
+
+
+static void flush_buffers(struct ngene_channel *chan)
+{
+ u8 val;
+
+ do {
+ msleep(1);
+ spin_lock_irq(&chan->state_lock);
+ val = chan->nextBuffer->ngeneBuffer.SR.Flags & 0x80;
+ spin_unlock_irq(&chan->state_lock);
+ } while (val);
+}
+
+static void clear_buffers(struct ngene_channel *chan)
+{
+ struct SBufferHeader *Cur = chan->nextBuffer;
+
+ do {
+ memset(&Cur->ngeneBuffer.SR, 0, sizeof(Cur->ngeneBuffer.SR));
+ if (chan->mode & NGENE_IO_TSOUT)
+ FillTSBuffer(Cur->Buffer1,
+ chan->Capture1Length,
+ chan->DataFormatFlags);
+ Cur = Cur->Next;
+ } while (Cur != chan->nextBuffer);
+
+ if (chan->mode & NGENE_IO_TSOUT) {
+ chan->nextBuffer->ngeneBuffer.SR.DTOUpdate =
+ chan->AudioDTOValue;
+ chan->AudioDTOUpdated = 0;
+
+ Cur = chan->TSIdleBuffer.Head;
+
+ do {
+ memset(&Cur->ngeneBuffer.SR, 0,
+ sizeof(Cur->ngeneBuffer.SR));
+ FillTSBuffer(Cur->Buffer1,
+ chan->Capture1Length,
+ chan->DataFormatFlags);
+ Cur = Cur->Next;
+ } while (Cur != chan->TSIdleBuffer.Head);
+ }
+}
+
+static int ngene_command_stream_control(struct ngene *dev, u8 stream,
+ u8 control, u8 mode, u8 flags)
+{
+ struct ngene_channel *chan = &dev->channel[stream];
+ struct ngene_command com;
+ u16 BsUVI = ((stream & 1) ? 0x9400 : 0x9300);
+ u16 BsSDI = ((stream & 1) ? 0x9600 : 0x9500);
+ u16 BsSPI = ((stream & 1) ? 0x9800 : 0x9700);
+ u16 BsSDO = 0x9B00;
+
+ /* down(&dev->stream_mutex); */
+ while (down_trylock(&dev->stream_mutex)) {
+ printk(KERN_INFO DEVICE_NAME ": SC locked\n");
+ msleep(1);
+ }
+ memset(&com, 0, sizeof(com));
+ com.cmd.hdr.Opcode = CMD_CONTROL;
+ com.cmd.hdr.Length = sizeof(struct FW_STREAM_CONTROL) - 2;
+ com.cmd.StreamControl.Stream = stream | (control ? 8 : 0);
+ if (chan->mode & NGENE_IO_TSOUT)
+ com.cmd.StreamControl.Stream |= 0x07;
+ com.cmd.StreamControl.Control = control |
+ (flags & SFLAG_ORDER_LUMA_CHROMA);
+ com.cmd.StreamControl.Mode = mode;
+ com.in_len = sizeof(struct FW_STREAM_CONTROL);
+ com.out_len = 0;
+
+ dprintk(KERN_INFO DEVICE_NAME
+ ": Stream=%02x, Control=%02x, Mode=%02x\n",
+ com.cmd.StreamControl.Stream, com.cmd.StreamControl.Control,
+ com.cmd.StreamControl.Mode);
+
+ chan->Mode = mode;
+
+ if (!(control & 0x80)) {
+ spin_lock_irq(&chan->state_lock);
+ if (chan->State == KSSTATE_RUN) {
+ chan->State = KSSTATE_ACQUIRE;
+ chan->HWState = HWSTATE_STOP;
+ spin_unlock_irq(&chan->state_lock);
+ if (ngene_command(dev, &com) < 0) {
+ up(&dev->stream_mutex);
+ return -1;
+ }
+ /* clear_buffers(chan); */
+ flush_buffers(chan);
+ up(&dev->stream_mutex);
+ return 0;
+ }
+ spin_unlock_irq(&chan->state_lock);
+ up(&dev->stream_mutex);
+ return 0;
+ }
+
+ if (mode & SMODE_AUDIO_CAPTURE) {
+ com.cmd.StreamControl.CaptureBlockCount =
+ chan->Capture1Length / AUDIO_BLOCK_SIZE;
+ com.cmd.StreamControl.Buffer_Address = chan->RingBuffer.PAHead;
+ } else if (mode & SMODE_TRANSPORT_STREAM) {
+ com.cmd.StreamControl.CaptureBlockCount =
+ chan->Capture1Length / TS_BLOCK_SIZE;
+ com.cmd.StreamControl.MaxLinesPerField =
+ chan->Capture1Length / TS_BLOCK_SIZE;
+ com.cmd.StreamControl.Buffer_Address =
+ chan->TSRingBuffer.PAHead;
+ if (chan->mode & NGENE_IO_TSOUT) {
+ com.cmd.StreamControl.BytesPerVBILine =
+ chan->Capture1Length / TS_BLOCK_SIZE;
+ com.cmd.StreamControl.Stream |= 0x07;
+ }
+ } else {
+ com.cmd.StreamControl.BytesPerVideoLine = chan->nBytesPerLine;
+ com.cmd.StreamControl.MaxLinesPerField = chan->nLines;
+ com.cmd.StreamControl.MinLinesPerField = 100;
+ com.cmd.StreamControl.Buffer_Address = chan->RingBuffer.PAHead;
+
+ if (mode & SMODE_VBI_CAPTURE) {
+ com.cmd.StreamControl.MaxVBILinesPerField =
+ chan->nVBILines;
+ com.cmd.StreamControl.MinVBILinesPerField = 0;
+ com.cmd.StreamControl.BytesPerVBILine =
+ chan->nBytesPerVBILine;
+ }
+ if (flags & SFLAG_COLORBAR)
+ com.cmd.StreamControl.Stream |= 0x04;
+ }
+
+ spin_lock_irq(&chan->state_lock);
+ if (mode & SMODE_AUDIO_CAPTURE) {
+ chan->nextBuffer = chan->RingBuffer.Head;
+ if (mode & SMODE_AUDIO_SPDIF) {
+ com.cmd.StreamControl.SetupDataLen =
+ sizeof(SPDIFConfiguration);
+ com.cmd.StreamControl.SetupDataAddr = BsSPI;
+ memcpy(com.cmd.StreamControl.SetupData,
+ SPDIFConfiguration, sizeof(SPDIFConfiguration));
+ } else {
+ com.cmd.StreamControl.SetupDataLen = 4;
+ com.cmd.StreamControl.SetupDataAddr = BsSDI;
+ memcpy(com.cmd.StreamControl.SetupData,
+ I2SConfiguration +
+ 4 * dev->card_info->i2s[stream], 4);
+ }
+ } else if (mode & SMODE_TRANSPORT_STREAM) {
+ chan->nextBuffer = chan->TSRingBuffer.Head;
+ if (stream >= STREAM_AUDIOIN1) {
+ if (chan->mode & NGENE_IO_TSOUT) {
+ com.cmd.StreamControl.SetupDataLen =
+ sizeof(TS_I2SOutConfiguration);
+ com.cmd.StreamControl.SetupDataAddr = BsSDO;
+ memcpy(com.cmd.StreamControl.SetupData,
+ TS_I2SOutConfiguration,
+ sizeof(TS_I2SOutConfiguration));
+ } else {
+ com.cmd.StreamControl.SetupDataLen =
+ sizeof(TS_I2SConfiguration);
+ com.cmd.StreamControl.SetupDataAddr = BsSDI;
+ memcpy(com.cmd.StreamControl.SetupData,
+ TS_I2SConfiguration,
+ sizeof(TS_I2SConfiguration));
+ }
+ } else {
+ com.cmd.StreamControl.SetupDataLen = 8;
+ com.cmd.StreamControl.SetupDataAddr = BsUVI + 0x10;
+ memcpy(com.cmd.StreamControl.SetupData,
+ TSFeatureDecoderSetup +
+ 8 * dev->card_info->tsf[stream], 8);
+ }
+ } else {
+ chan->nextBuffer = chan->RingBuffer.Head;
+ com.cmd.StreamControl.SetupDataLen =
+ 16 + sizeof(ITUFeatureDecoderSetup);
+ com.cmd.StreamControl.SetupDataAddr = BsUVI;
+ memcpy(com.cmd.StreamControl.SetupData,
+ ITUDecoderSetup[chan->itumode], 16);
+ memcpy(com.cmd.StreamControl.SetupData + 16,
+ ITUFeatureDecoderSetup, sizeof(ITUFeatureDecoderSetup));
+ }
+ clear_buffers(chan);
+ chan->State = KSSTATE_RUN;
+ if (mode & SMODE_TRANSPORT_STREAM)
+ chan->HWState = HWSTATE_RUN;
+ else
+ chan->HWState = HWSTATE_STARTUP;
+ spin_unlock_irq(&chan->state_lock);
+
+ if (ngene_command(dev, &com) < 0) {
+ up(&dev->stream_mutex);
+ return -1;
+ }
+ up(&dev->stream_mutex);
+ return 0;
+}
+
+
+/****************************************************************************/
+/* I2C **********************************************************************/
+/****************************************************************************/
+
+static void ngene_i2c_set_bus(struct ngene *dev, int bus)
+{
+ if (!(dev->card_info->i2c_access & 2))
+ return;
+ if (dev->i2c_current_bus == bus)
+ return;
+
+ switch (bus) {
+ case 0:
+ ngene_command_gpio_set(dev, 3, 0);
+ ngene_command_gpio_set(dev, 2, 1);
+ break;
+
+ case 1:
+ ngene_command_gpio_set(dev, 2, 0);
+ ngene_command_gpio_set(dev, 3, 1);
+ break;
+ }
+ dev->i2c_current_bus = bus;
+}
+
+static int ngene_i2c_master_xfer(struct i2c_adapter *adapter,
+ struct i2c_msg msg[], int num)
+{
+ struct ngene_channel *chan =
+ (struct ngene_channel *)i2c_get_adapdata(adapter);
+ struct ngene *dev = chan->dev;
+
+ down(&dev->i2c_switch_mutex);
+ ngene_i2c_set_bus(dev, chan->number);
+
+ if (num == 2 && msg[1].flags & I2C_M_RD && !(msg[0].flags & I2C_M_RD))
+ if (!ngene_command_i2c_read(dev, msg[0].addr,
+ msg[0].buf, msg[0].len,
+ msg[1].buf, msg[1].len, 0))
+ goto done;
+
+ if (num == 1 && !(msg[0].flags & I2C_M_RD))
+ if (!ngene_command_i2c_write(dev, msg[0].addr,
+ msg[0].buf, msg[0].len))
+ goto done;
+ if (num == 1 && (msg[0].flags & I2C_M_RD))
+ if (!ngene_command_i2c_read(dev, msg[0].addr, 0, 0,
+ msg[0].buf, msg[0].len, 0))
+ goto done;
+
+ up(&dev->i2c_switch_mutex);
+ return -EIO;
+
+done:
+ up(&dev->i2c_switch_mutex);
+ return num;
+}
+
+
+static u32 ngene_i2c_functionality(struct i2c_adapter *adap)
+{
+ return I2C_FUNC_SMBUS_EMUL;
+}
+
+static struct i2c_algorithm ngene_i2c_algo = {
+ .master_xfer = ngene_i2c_master_xfer,
+ .functionality = ngene_i2c_functionality,
+};
+
+static int ngene_i2c_init(struct ngene *dev, int dev_nr)
+{
+ struct i2c_adapter *adap = &(dev->channel[dev_nr].i2c_adapter);
+
+ i2c_set_adapdata(adap, &(dev->channel[dev_nr]));
+ adap->class = I2C_CLASS_TV_DIGITAL | I2C_CLASS_TV_ANALOG;
+
+ strcpy(adap->name, "nGene");
+
+ adap->algo = &ngene_i2c_algo;
+ adap->algo_data = (void *)&(dev->channel[dev_nr]);
+ adap->dev.parent = &dev->pci_dev->dev;
+
+ return i2c_add_adapter(adap);
+}
+
+
+/****************************************************************************/
+/* DVB functions and API interface ******************************************/
+/****************************************************************************/
+
+static void swap_buffer(u32 *p, u32 len)
+{
+ while (len) {
+ *p = swab32(*p);
+ p++;
+ len -= 4;
+ }
+}
+
+
+static void *tsin_exchange(void *priv, void *buf, u32 len, u32 clock, u32 flags)
+{
+ struct ngene_channel *chan = priv;
+
+
+#ifdef COMMAND_TIMEOUT_WORKAROUND
+ if (chan->users > 0)
+#endif
+ dvb_dmx_swfilter(&chan->demux, buf, len);
+ return 0;
+}
+
+u8 fill_ts[188] = { 0x47, 0x1f, 0xff, 0x10 };
+
+static void *tsout_exchange(void *priv, void *buf, u32 len,
+ u32 clock, u32 flags)
+{
+ struct ngene_channel *chan = priv;
+ struct ngene *dev = chan->dev;
+ u32 alen;
+
+ alen = dvb_ringbuffer_avail(&dev->tsout_rbuf);
+ alen -= alen % 188;
+
+ if (alen < len)
+ FillTSBuffer(buf + alen, len - alen, flags);
+ else
+ alen = len;
+ dvb_ringbuffer_read(&dev->tsout_rbuf, buf, alen);
+ if (flags & DF_SWAP32)
+ swap_buffer((u32 *)buf, alen);
+ wake_up_interruptible(&dev->tsout_rbuf.queue);
+ return buf;
+}
+
+
+static void set_transfer(struct ngene_channel *chan, int state)
+{
+ u8 control = 0, mode = 0, flags = 0;
+ struct ngene *dev = chan->dev;
+ int ret;
+
+ /*
+ printk(KERN_INFO DEVICE_NAME ": st %d\n", state);
+ msleep(100);
+ */
+
+ if (state) {
+ if (chan->running) {
+ printk(KERN_INFO DEVICE_NAME ": already running\n");
+ return;
+ }
+ } else {
+ if (!chan->running) {
+ printk(KERN_INFO DEVICE_NAME ": already stopped\n");
+ return;
+ }
+ }
+
+ if (dev->card_info->switch_ctrl)
+ dev->card_info->switch_ctrl(chan, 1, state ^ 1);
+
+ if (state) {
+ spin_lock_irq(&chan->state_lock);
+
+ /* printk(KERN_INFO DEVICE_NAME ": lock=%08x\n",
+ ngreadl(0x9310)); */
+ dvb_ringbuffer_flush(&dev->tsout_rbuf);
+ control = 0x80;
+ if (chan->mode & (NGENE_IO_TSIN | NGENE_IO_TSOUT)) {
+ chan->Capture1Length = 512 * 188;
+ mode = SMODE_TRANSPORT_STREAM;
+ }
+ if (chan->mode & NGENE_IO_TSOUT) {
+ chan->pBufferExchange = tsout_exchange;
+ /* 0x66666666 = 50MHz *2^33 /250MHz */
+ chan->AudioDTOValue = 0x66666666;
+ /* set_dto(chan, 38810700+1000); */
+ /* set_dto(chan, 19392658); */
+ }
+ if (chan->mode & NGENE_IO_TSIN)
+ chan->pBufferExchange = tsin_exchange;
+ /* ngwritel(0, 0x9310); */
+ spin_unlock_irq(&chan->state_lock);
+ } else
+ ;/* printk(KERN_INFO DEVICE_NAME ": lock=%08x\n",
+ ngreadl(0x9310)); */
+
+ ret = ngene_command_stream_control(dev, chan->number,
+ control, mode, flags);
+ if (!ret)
+ chan->running = state;
+ else
+ printk(KERN_ERR DEVICE_NAME ": set_transfer %d failed\n",
+ state);
+ if (!state) {
+ spin_lock_irq(&chan->state_lock);
+ chan->pBufferExchange = 0;
+ dvb_ringbuffer_flush(&dev->tsout_rbuf);
+ spin_unlock_irq(&chan->state_lock);
+ }
+}
+
+static int ngene_start_feed(struct dvb_demux_feed *dvbdmxfeed)
+{
+ struct dvb_demux *dvbdmx = dvbdmxfeed->demux;
+ struct ngene_channel *chan = dvbdmx->priv;
+
+ if (chan->users == 0) {
+#ifdef COMMAND_TIMEOUT_WORKAROUND
+ if (!chan->running)
+#endif
+ set_transfer(chan, 1);
+ /* msleep(10); */
+ }
+
+ return ++chan->users;
+}
+
+static int ngene_stop_feed(struct dvb_demux_feed *dvbdmxfeed)
+{
+ struct dvb_demux *dvbdmx = dvbdmxfeed->demux;
+ struct ngene_channel *chan = dvbdmx->priv;
+
+ if (--chan->users)
+ return chan->users;
+
+#ifndef COMMAND_TIMEOUT_WORKAROUND
+ set_transfer(chan, 0);
+#endif
+
+ return 0;
+}
+
+
+
+static int my_dvb_dmx_ts_card_init(struct dvb_demux *dvbdemux, char *id,
+ int (*start_feed)(struct dvb_demux_feed *),
+ int (*stop_feed)(struct dvb_demux_feed *),
+ void *priv)
+{
+ dvbdemux->priv = priv;
+
+ dvbdemux->filternum = 256;
+ dvbdemux->feednum = 256;
+ dvbdemux->start_feed = start_feed;
+ dvbdemux->stop_feed = stop_feed;
+ dvbdemux->write_to_decoder = 0;
+ dvbdemux->dmx.capabilities = (DMX_TS_FILTERING |
+ DMX_SECTION_FILTERING |
+ DMX_MEMORY_BASED_FILTERING);
+ return dvb_dmx_init(dvbdemux);
+}
+
+static int my_dvb_dmxdev_ts_card_init(struct dmxdev *dmxdev,
+ struct dvb_demux *dvbdemux,
+ struct dmx_frontend *hw_frontend,
+ struct dmx_frontend *mem_frontend,
+ struct dvb_adapter *dvb_adapter)
+{
+ int ret;
+
+ dmxdev->filternum = 256;
+ dmxdev->demux = &dvbdemux->dmx;
+ dmxdev->capabilities = 0;
+ ret = dvb_dmxdev_init(dmxdev, dvb_adapter);
+ if (ret < 0)
+ return ret;
+
+ hw_frontend->source = DMX_FRONTEND_0;
+ dvbdemux->dmx.add_frontend(&dvbdemux->dmx, hw_frontend);
+ mem_frontend->source = DMX_MEMORY_FE;
+ dvbdemux->dmx.add_frontend(&dvbdemux->dmx, mem_frontend);
+ return dvbdemux->dmx.connect_frontend(&dvbdemux->dmx, hw_frontend);
+}
+
+
+/****************************************************************************/
+/* nGene hardware init and release functions ********************************/
+/****************************************************************************/
+
+static void free_ringbuffer(struct ngene *dev, struct SRingBufferDescriptor *rb)
+{
+ struct SBufferHeader *Cur = rb->Head;
+ u32 j;
+
+ if (!Cur)
+ return;
+
+ for (j = 0; j < rb->NumBuffers; j++, Cur = Cur->Next) {
+ if (Cur->Buffer1)
+ pci_free_consistent(dev->pci_dev,
+ rb->Buffer1Length,
+ Cur->Buffer1,
+ Cur->scList1->Address);
+
+ if (Cur->Buffer2)
+ pci_free_consistent(dev->pci_dev,
+ rb->Buffer2Length,
+ Cur->Buffer2,
+ Cur->scList2->Address);
+ }
+
+ if (rb->SCListMem)
+ pci_free_consistent(dev->pci_dev, rb->SCListMemSize,
+ rb->SCListMem, rb->PASCListMem);
+
+ pci_free_consistent(dev->pci_dev, rb->MemSize, rb->Head, rb->PAHead);
+}
+
+static void free_idlebuffer(struct ngene *dev,
+ struct SRingBufferDescriptor *rb,
+ struct SRingBufferDescriptor *tb)
+{
+ int j;
+ struct SBufferHeader *Cur = tb->Head;
+
+ if (!rb->Head)
+ return;
+ free_ringbuffer(dev, rb);
+ for (j = 0; j < tb->NumBuffers; j++, Cur = Cur->Next) {
+ Cur->Buffer2 = 0;
+ Cur->scList2 = 0;
+ Cur->ngeneBuffer.Address_of_first_entry_2 = 0;
+ Cur->ngeneBuffer.Number_of_entries_2 = 0;
+ }
+}
+
+static void free_common_buffers(struct ngene *dev)
+{
+ u32 i;
+ struct ngene_channel *chan;
+
+ for (i = STREAM_VIDEOIN1; i < MAX_STREAM; i++) {
+ chan = &dev->channel[i];
+ free_idlebuffer(dev, &chan->TSIdleBuffer, &chan->TSRingBuffer);
+ free_ringbuffer(dev, &chan->RingBuffer);
+ free_ringbuffer(dev, &chan->TSRingBuffer);
+ }
+
+ if (dev->OverflowBuffer)
+ pci_free_consistent(dev->pci_dev,
+ OVERFLOW_BUFFER_SIZE,
+ dev->OverflowBuffer, dev->PAOverflowBuffer);
+
+ if (dev->FWInterfaceBuffer)
+ pci_free_consistent(dev->pci_dev,
+ 4096,
+ dev->FWInterfaceBuffer,
+ dev->PAFWInterfaceBuffer);
+}
+
+/****************************************************************************/
+/* Ring buffer handling *****************************************************/
+/****************************************************************************/
+
+static int create_ring_buffer(struct pci_dev *pci_dev,
+ struct SRingBufferDescriptor *descr, u32 NumBuffers)
+{
+ dma_addr_t tmp;
+ struct SBufferHeader *Head;
+ u32 i;
+ u32 MemSize = SIZEOF_SBufferHeader * NumBuffers;
+ u64 PARingBufferHead;
+ u64 PARingBufferCur;
+ u64 PARingBufferNext;
+ struct SBufferHeader *Cur, *Next;
+
+ descr->Head = 0;
+ descr->MemSize = 0;
+ descr->PAHead = 0;
+ descr->NumBuffers = 0;
+
+ if (MemSize < 4096)
+ MemSize = 4096;
+
+ Head = pci_alloc_consistent(pci_dev, MemSize, &tmp);
+ PARingBufferHead = tmp;
+
+ if (!Head)
+ return -ENOMEM;
+
+ memset(Head, 0, MemSize);
+
+ PARingBufferCur = PARingBufferHead;
+ Cur = Head;
+
+ for (i = 0; i < NumBuffers - 1; i++) {
+ Next = (struct SBufferHeader *)
+ (((u8 *) Cur) + SIZEOF_SBufferHeader);
+ PARingBufferNext = PARingBufferCur + SIZEOF_SBufferHeader;
+ Cur->Next = Next;
+ Cur->ngeneBuffer.Next = PARingBufferNext;
+ Cur = Next;
+ PARingBufferCur = PARingBufferNext;
+ }
+ /* Last Buffer points back to first one */
+ Cur->Next = Head;
+ Cur->ngeneBuffer.Next = PARingBufferHead;
+
+ descr->Head = Head;
+ descr->MemSize = MemSize;
+ descr->PAHead = PARingBufferHead;
+ descr->NumBuffers = NumBuffers;
+
+ return 0;
+}
+
+static int AllocateRingBuffers(struct pci_dev *pci_dev,
+ dma_addr_t of,
+ struct SRingBufferDescriptor *pRingBuffer,
+ u32 Buffer1Length, u32 Buffer2Length)
+{
+ dma_addr_t tmp;
+ u32 i, j;
+ int status = 0;
+ u32 SCListMemSize = pRingBuffer->NumBuffers
+ * ((Buffer2Length != 0) ? (NUM_SCATTER_GATHER_ENTRIES * 2) :
+ NUM_SCATTER_GATHER_ENTRIES)
+ * sizeof(struct HW_SCATTER_GATHER_ELEMENT);
+
+ u64 PASCListMem;
+ struct HW_SCATTER_GATHER_ELEMENT *SCListEntry;
+ u64 PASCListEntry;
+ struct SBufferHeader *Cur;
+ void *SCListMem;
+
+ if (SCListMemSize < 4096)
+ SCListMemSize = 4096;
+
+ SCListMem = pci_alloc_consistent(pci_dev, SCListMemSize, &tmp);
+
+ PASCListMem = tmp;
+ if (SCListMem == NULL)
+ return -ENOMEM;
+
+ memset(SCListMem, 0, SCListMemSize);
+
+ pRingBuffer->SCListMem = SCListMem;
+ pRingBuffer->PASCListMem = PASCListMem;
+ pRingBuffer->SCListMemSize = SCListMemSize;
+ pRingBuffer->Buffer1Length = Buffer1Length;
+ pRingBuffer->Buffer2Length = Buffer2Length;
+
+ SCListEntry = SCListMem;
+ PASCListEntry = PASCListMem;
+ Cur = pRingBuffer->Head;
+
+ for (i = 0; i < pRingBuffer->NumBuffers; i += 1, Cur = Cur->Next) {
+ u64 PABuffer;
+
+ void *Buffer = pci_alloc_consistent(pci_dev, Buffer1Length,
+ &tmp);
+ PABuffer = tmp;
+
+ if (Buffer == NULL)
+ return -ENOMEM;
+
+ Cur->Buffer1 = Buffer;
+
+ SCListEntry->Address = PABuffer;
+ SCListEntry->Length = Buffer1Length;
+
+ Cur->scList1 = SCListEntry;
+ Cur->ngeneBuffer.Address_of_first_entry_1 = PASCListEntry;
+ Cur->ngeneBuffer.Number_of_entries_1 =
+ NUM_SCATTER_GATHER_ENTRIES;
+
+ SCListEntry += 1;
+ PASCListEntry += sizeof(struct HW_SCATTER_GATHER_ELEMENT);
+
+#if NUM_SCATTER_GATHER_ENTRIES > 1
+ for (j = 0; j < NUM_SCATTER_GATHER_ENTRIES - 1; j += 1) {
+ SCListEntry->Address = of;
+ SCListEntry->Length = OVERFLOW_BUFFER_SIZE;
+ SCListEntry += 1;
+ PASCListEntry +=
+ sizeof(struct HW_SCATTER_GATHER_ELEMENT);
+ }
+#endif
+
+ if (!Buffer2Length)
+ continue;
+
+ Buffer = pci_alloc_consistent(pci_dev, Buffer2Length, &tmp);
+ PABuffer = tmp;
+
+ if (Buffer == NULL)
+ return -ENOMEM;
+
+ Cur->Buffer2 = Buffer;
+
+ SCListEntry->Address = PABuffer;
+ SCListEntry->Length = Buffer2Length;
+
+ Cur->scList2 = SCListEntry;
+ Cur->ngeneBuffer.Address_of_first_entry_2 = PASCListEntry;
+ Cur->ngeneBuffer.Number_of_entries_2 =
+ NUM_SCATTER_GATHER_ENTRIES;
+
+ SCListEntry += 1;
+ PASCListEntry += sizeof(struct HW_SCATTER_GATHER_ELEMENT);
+
+#if NUM_SCATTER_GATHER_ENTRIES > 1
+ for (j = 0; j < NUM_SCATTER_GATHER_ENTRIES - 1; j++) {
+ SCListEntry->Address = of;
+ SCListEntry->Length = OVERFLOW_BUFFER_SIZE;
+ SCListEntry += 1;
+ PASCListEntry +=
+ sizeof(struct HW_SCATTER_GATHER_ELEMENT);
+ }
+#endif
+
+ }
+
+ return status;
+}
+
+static int FillTSIdleBuffer(struct SRingBufferDescriptor *pIdleBuffer,
+ struct SRingBufferDescriptor *pRingBuffer)
+{
+ int status = 0;
+
+ /* Copy pointer to scatter gather list in TSRingbuffer
+ structure for buffer 2
+ Load number of buffer
+ */
+ u32 n = pRingBuffer->NumBuffers;
+
+ /* Point to first buffer entry */
+ struct SBufferHeader *Cur = pRingBuffer->Head;
+ int i;
+ /* Loop thru all buffer and set Buffer 2 pointers to TSIdlebuffer */
+ for (i = 0; i < n; i++) {
+ Cur->Buffer2 = pIdleBuffer->Head->Buffer1;
+ Cur->scList2 = pIdleBuffer->Head->scList1;
+ Cur->ngeneBuffer.Address_of_first_entry_2 =
+ pIdleBuffer->Head->ngeneBuffer.
+ Address_of_first_entry_1;
+ Cur->ngeneBuffer.Number_of_entries_2 =
+ pIdleBuffer->Head->ngeneBuffer.Number_of_entries_1;
+ Cur = Cur->Next;
+ }
+ return status;
+}
+
+static u32 RingBufferSizes[MAX_STREAM] = {
+ RING_SIZE_VIDEO,
+ RING_SIZE_VIDEO,
+ RING_SIZE_AUDIO,
+ RING_SIZE_AUDIO,
+ RING_SIZE_AUDIO,
+};
+
+static u32 Buffer1Sizes[MAX_STREAM] = {
+ MAX_VIDEO_BUFFER_SIZE,
+ MAX_VIDEO_BUFFER_SIZE,
+ MAX_AUDIO_BUFFER_SIZE,
+ MAX_AUDIO_BUFFER_SIZE,
+ MAX_AUDIO_BUFFER_SIZE
+};
+
+static u32 Buffer2Sizes[MAX_STREAM] = {
+ MAX_VBI_BUFFER_SIZE,
+ MAX_VBI_BUFFER_SIZE,
+ 0,
+ 0,
+ 0
+};
+
+
+static int AllocCommonBuffers(struct ngene *dev)
+{
+ int status = 0, i;
+
+ dev->FWInterfaceBuffer = pci_alloc_consistent(dev->pci_dev, 4096,
+ &dev->PAFWInterfaceBuffer);
+ if (!dev->FWInterfaceBuffer)
+ return -ENOMEM;
+ dev->hosttongene = dev->FWInterfaceBuffer;
+ dev->ngenetohost = dev->FWInterfaceBuffer + 256;
+ dev->EventBuffer = dev->FWInterfaceBuffer + 512;
+
+ dev->OverflowBuffer = pci_alloc_consistent(dev->pci_dev,
+ OVERFLOW_BUFFER_SIZE,
+ &dev->PAOverflowBuffer);
+ if (!dev->OverflowBuffer)
+ return -ENOMEM;
+ memset(dev->OverflowBuffer, 0, OVERFLOW_BUFFER_SIZE);
+
+ for (i = STREAM_VIDEOIN1; i < MAX_STREAM; i++) {
+ int type = dev->card_info->io_type[i];
+
+ dev->channel[i].State = KSSTATE_STOP;
+
+ if (type & (NGENE_IO_TV | NGENE_IO_HDTV | NGENE_IO_AIN)) {
+ status = create_ring_buffer(dev->pci_dev,
+ &dev->channel[i].RingBuffer,
+ RingBufferSizes[i]);
+ if (status < 0)
+ break;
+
+ if (type & (NGENE_IO_TV | NGENE_IO_AIN)) {
+ status = AllocateRingBuffers(dev->pci_dev,
+ dev->
+ PAOverflowBuffer,
+ &dev->channel[i].
+ RingBuffer,
+ Buffer1Sizes[i],
+ Buffer2Sizes[i]);
+ if (status < 0)
+ break;
+ } else if (type & NGENE_IO_HDTV) {
+ status = AllocateRingBuffers(dev->pci_dev,
+ dev->
+ PAOverflowBuffer,
+ &dev->channel[i].
+ RingBuffer,
+ MAX_HDTV_BUFFER_SIZE,
+ 0);
+ if (status < 0)
+ break;
+ }
+ }
+
+ if (type & (NGENE_IO_TSIN | NGENE_IO_TSOUT)) {
+
+ status = create_ring_buffer(dev->pci_dev,
+ &dev->channel[i].
+ TSRingBuffer, RING_SIZE_TS);
+ if (status < 0)
+ break;
+
+ status = AllocateRingBuffers(dev->pci_dev,
+ dev->PAOverflowBuffer,
+ &dev->channel[i].
+ TSRingBuffer,
+ MAX_TS_BUFFER_SIZE, 0);
+ if (status)
+ break;
+ }
+
+ if (type & NGENE_IO_TSOUT) {
+ status = create_ring_buffer(dev->pci_dev,
+ &dev->channel[i].
+ TSIdleBuffer, 1);
+ if (status < 0)
+ break;
+ status = AllocateRingBuffers(dev->pci_dev,
+ dev->PAOverflowBuffer,
+ &dev->channel[i].
+ TSIdleBuffer,
+ MAX_TS_BUFFER_SIZE, 0);
+ if (status)
+ break;
+ FillTSIdleBuffer(&dev->channel[i].TSIdleBuffer,
+ &dev->channel[i].TSRingBuffer);
+ }
+ }
+ return status;
+}
+
+static void ngene_release_buffers(struct ngene *dev)
+{
+ if (dev->iomem)
+ iounmap(dev->iomem);
+ free_common_buffers(dev);
+ vfree(dev->tsout_buf);
+ vfree(dev->ain_buf);
+ vfree(dev->vin_buf);
+ vfree(dev);
+}
+
+static int ngene_get_buffers(struct ngene *dev)
+{
+ if (AllocCommonBuffers(dev))
+ return -ENOMEM;
+ if (dev->card_info->io_type[4] & NGENE_IO_TSOUT) {
+ dev->tsout_buf = vmalloc(TSOUT_BUF_SIZE);
+ if (!dev->tsout_buf)
+ return -ENOMEM;
+ dvb_ringbuffer_init(&dev->tsout_rbuf,
+ dev->tsout_buf, TSOUT_BUF_SIZE);
+ }
+ if (dev->card_info->io_type[2] & NGENE_IO_AIN) {
+ dev->ain_buf = vmalloc(AIN_BUF_SIZE);
+ if (!dev->ain_buf)
+ return -ENOMEM;
+ dvb_ringbuffer_init(&dev->ain_rbuf, dev->ain_buf, AIN_BUF_SIZE);
+ }
+ if (dev->card_info->io_type[0] & NGENE_IO_HDTV) {
+ dev->vin_buf = vmalloc(VIN_BUF_SIZE);
+ if (!dev->vin_buf)
+ return -ENOMEM;
+ dvb_ringbuffer_init(&dev->vin_rbuf, dev->vin_buf, VIN_BUF_SIZE);
+ }
+ dev->iomem = ioremap(pci_resource_start(dev->pci_dev, 0),
+ pci_resource_len(dev->pci_dev, 0));
+ if (!dev->iomem)
+ return -ENOMEM;
+
+ return 0;
+}
+
+static void ngene_init(struct ngene *dev)
+{
+ int i;
+
+ tasklet_init(&dev->event_tasklet, event_tasklet, (unsigned long)dev);
+
+ memset_io(dev->iomem + 0xc000, 0x00, 0x220);
+ memset_io(dev->iomem + 0xc400, 0x00, 0x100);
+
+ for (i = 0; i < MAX_STREAM; i++) {
+ dev->channel[i].dev = dev;
+ dev->channel[i].number = i;
+ }
+
+ dev->fw_interface_version = 0;
+
+ ngwritel(0, NGENE_INT_ENABLE);
+
+ dev->icounts = ngreadl(NGENE_INT_COUNTS);
+
+ dev->device_version = ngreadl(DEV_VER) & 0x0f;
+ printk(KERN_INFO DEVICE_NAME ": Device version %d\n",
+ dev->device_version);
+}
+
+static int ngene_load_firm(struct ngene *dev)
+{
+ u32 size;
+ const struct firmware *fw = NULL;
+ u8 *ngene_fw;
+ char *fw_name;
+ int err, version;
+
+ version = dev->card_info->fw_version;
+
+ switch (version) {
+ default:
+ case 15:
+ version = 15;
+ size = 23466;
+ fw_name = "ngene_15.fw";
+ break;
+ case 16:
+ size = 23498;
+ fw_name = "ngene_16.fw";
+ break;
+ case 17:
+ size = 24446;
+ fw_name = "ngene_17.fw";
+ break;
+ }
+
+ if (request_firmware(&fw, fw_name, &dev->pci_dev->dev) < 0) {
+ printk(KERN_ERR DEVICE_NAME
+ ": Could not load firmware file %s.\n", fw_name);
+ printk(KERN_INFO DEVICE_NAME
+ ": Copy %s to your hotplug directory!\n", fw_name);
+ return -1;
+ }
+ if (size != fw->size) {
+ printk(KERN_ERR DEVICE_NAME
+ ": Firmware %s has invalid size!", fw_name);
+ err = -1;
+ } else {
+ printk(KERN_INFO DEVICE_NAME
+ ": Loading firmware file %s.\n", fw_name);
+ ngene_fw = (u8 *) fw->data;
+ err = ngene_command_load_firmware(dev, ngene_fw, size);
+ }
+
+ release_firmware(fw);
+
+ return err;
+}
+
+static void ngene_stop(struct ngene *dev)
+{
+ down(&dev->cmd_mutex);
+ i2c_del_adapter(&(dev->channel[0].i2c_adapter));
+ i2c_del_adapter(&(dev->channel[1].i2c_adapter));
+ ngwritel(0, NGENE_INT_ENABLE);
+ ngwritel(0, NGENE_COMMAND);
+ ngwritel(0, NGENE_COMMAND_HI);
+ ngwritel(0, NGENE_STATUS);
+ ngwritel(0, NGENE_STATUS_HI);
+ ngwritel(0, NGENE_EVENT);
+ ngwritel(0, NGENE_EVENT_HI);
+ free_irq(dev->pci_dev->irq, dev);
+}
+
+static int ngene_start(struct ngene *dev)
+{
+ int stat;
+ int i;
+
+ pci_set_master(dev->pci_dev);
+ ngene_init(dev);
+
+ stat = request_irq(dev->pci_dev->irq, irq_handler,
+ IRQF_SHARED, "nGene",
+ (void *)dev);
+ if (stat < 0)
+ return stat;
+
+ init_waitqueue_head(&dev->cmd_wq);
+ init_waitqueue_head(&dev->tx_wq);
+ init_waitqueue_head(&dev->rx_wq);
+ sema_init(&dev->cmd_mutex, 1);
+ sema_init(&dev->stream_mutex, 1);
+ sema_init(&dev->pll_mutex, 1);
+ sema_init(&dev->i2c_switch_mutex, 1);
+ spin_lock_init(&dev->cmd_lock);
+ for (i = 0; i < MAX_STREAM; i++)
+ spin_lock_init(&dev->channel[i].state_lock);
+ ngwritel(1, TIMESTAMPS);
+
+ ngwritel(1, NGENE_INT_ENABLE);
+
+ stat = ngene_load_firm(dev);
+ if (stat < 0)
+ goto fail;
+
+ stat = ngene_i2c_init(dev, 0);
+ if (stat < 0)
+ goto fail;
+
+ stat = ngene_i2c_init(dev, 1);
+ if (stat < 0)
+ goto fail;
+
+ if (dev->card_info->fw_version == 17) {
+ u8 tsin4_config[6] = {
+ 3072 / 64, 3072 / 64, 0, 3072 / 64, 3072 / 64, 0};
+ u8 default_config[6] = {
+ 4096 / 64, 4096 / 64, 0, 2048 / 64, 2048 / 64, 0};
+ u8 *bconf = default_config;
+
+ if (dev->card_info->io_type[3] == NGENE_IO_TSIN)
+ bconf = tsin4_config;
+ dprintk(KERN_DEBUG DEVICE_NAME ": FW 17 buffer config\n");
+ stat = ngene_command_config_free_buf(dev, bconf);
+ } else {
+ int bconf = BUFFER_CONFIG_4422;
+ if (dev->card_info->io_type[3] == NGENE_IO_TSIN)
+ bconf = BUFFER_CONFIG_3333;
+ stat = ngene_command_config_buf(dev, bconf);
+ }
+ return stat;
+fail:
+ ngwritel(0, NGENE_INT_ENABLE);
+ free_irq(dev->pci_dev->irq, dev);
+ return stat;
+}
+
+
+
+/****************************************************************************/
+/* Switch control (I2C gates, etc.) *****************************************/
+/****************************************************************************/
+
+
+/****************************************************************************/
+/* Demod/tuner attachment ***************************************************/
+/****************************************************************************/
+
+static int tuner_attach_stv6110(struct ngene_channel *chan)
+{
+ struct stv090x_config *feconf = (struct stv090x_config *)
+ chan->dev->card_info->fe_config[chan->number];
+ struct stv6110x_config *tunerconf = (struct stv6110x_config *)
+ chan->dev->card_info->tuner_config[chan->number];
+ struct stv6110x_devctl *ctl;
+
+ ctl = dvb_attach(stv6110x_attach, chan->fe, tunerconf,
+ &chan->i2c_adapter);
+ if (ctl == NULL) {
+ printk(KERN_ERR DEVICE_NAME ": No STV6110X found!\n");
+ return -ENODEV;
+ }
+
+ feconf->tuner_init = ctl->tuner_init;
+ feconf->tuner_set_mode = ctl->tuner_set_mode;
+ feconf->tuner_set_frequency = ctl->tuner_set_frequency;
+ feconf->tuner_get_frequency = ctl->tuner_get_frequency;
+ feconf->tuner_set_bandwidth = ctl->tuner_set_bandwidth;
+ feconf->tuner_get_bandwidth = ctl->tuner_get_bandwidth;
+ feconf->tuner_set_bbgain = ctl->tuner_set_bbgain;
+ feconf->tuner_get_bbgain = ctl->tuner_get_bbgain;
+ feconf->tuner_set_refclk = ctl->tuner_set_refclk;
+ feconf->tuner_get_status = ctl->tuner_get_status;
+
+ return 0;
+}
+
+
+static int demod_attach_stv0900(struct ngene_channel *chan)
+{
+ struct stv090x_config *feconf = (struct stv090x_config *)
+ chan->dev->card_info->fe_config[chan->number];
+
+ chan->fe = dvb_attach(stv090x_attach,
+ feconf,
+ &chan->i2c_adapter,
+ chan->number == 0 ? STV090x_DEMODULATOR_0 :
+ STV090x_DEMODULATOR_1);
+ if (chan->fe == NULL) {
+ printk(KERN_ERR DEVICE_NAME ": No STV0900 found!\n");
+ return -ENODEV;
+ }
+
+ if (!dvb_attach(lnbh24_attach, chan->fe, &chan->i2c_adapter, 0,
+ 0, chan->dev->card_info->lnb[chan->number])) {
+ printk(KERN_ERR DEVICE_NAME ": No LNBH24 found!\n");
+ dvb_frontend_detach(chan->fe);
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+/****************************************************************************/
+/****************************************************************************/
+/****************************************************************************/
+
+static void release_channel(struct ngene_channel *chan)
+{
+ struct dvb_demux *dvbdemux = &chan->demux;
+ struct ngene *dev = chan->dev;
+ struct ngene_info *ni = dev->card_info;
+ int io = ni->io_type[chan->number];
+
+#ifdef COMMAND_TIMEOUT_WORKAROUND
+ if (chan->running)
+ set_transfer(chan, 0);
+#endif
+
+ tasklet_kill(&chan->demux_tasklet);
+
+ if (io & (NGENE_IO_TSIN | NGENE_IO_TSOUT)) {
+ if (chan->fe) {
+ dvb_unregister_frontend(chan->fe);
+ dvb_frontend_detach(chan->fe);
+ chan->fe = 0;
+ }
+ dvbdemux->dmx.close(&dvbdemux->dmx);
+ dvbdemux->dmx.remove_frontend(&dvbdemux->dmx,
+ &chan->hw_frontend);
+ dvbdemux->dmx.remove_frontend(&dvbdemux->dmx,
+ &chan->mem_frontend);
+ dvb_dmxdev_release(&chan->dmxdev);
+ dvb_dmx_release(&chan->demux);
+
+ if (chan->number == 0 || !one_adapter)
+ dvb_unregister_adapter(&dev->adapter[chan->number]);
+ }
+}
+
+static int init_channel(struct ngene_channel *chan)
+{
+ int ret = 0, nr = chan->number;
+ struct dvb_adapter *adapter = NULL;
+ struct dvb_demux *dvbdemux = &chan->demux;
+ struct ngene *dev = chan->dev;
+ struct ngene_info *ni = dev->card_info;
+ int io = ni->io_type[nr];
+
+ tasklet_init(&chan->demux_tasklet, demux_tasklet, (unsigned long)chan);
+ chan->users = 0;
+ chan->type = io;
+ chan->mode = chan->type; /* for now only one mode */
+
+ if (io & (NGENE_IO_TSIN | NGENE_IO_TSOUT)) {
+ if (nr >= STREAM_AUDIOIN1)
+ chan->DataFormatFlags = DF_SWAP32;
+ if (nr == 0 || !one_adapter) {
+ adapter = &dev->adapter[nr];
+ ret = dvb_register_adapter(adapter, "nGene",
+ THIS_MODULE,
+ &chan->dev->pci_dev->dev,
+ adapter_nr);
+ if (ret < 0)
+ return ret;
+ } else {
+ adapter = &dev->adapter[0];
+ }
+
+ ret = my_dvb_dmx_ts_card_init(dvbdemux, "SW demux",
+ ngene_start_feed,
+ ngene_stop_feed, chan);
+ ret = my_dvb_dmxdev_ts_card_init(&chan->dmxdev, &chan->demux,
+ &chan->hw_frontend,
+ &chan->mem_frontend, adapter);
+ }
+
+ if (io & NGENE_IO_TSIN) {
+ chan->fe = NULL;
+ if (ni->demod_attach[nr])
+ ni->demod_attach[nr](chan);
+ if (chan->fe) {
+ if (dvb_register_frontend(adapter, chan->fe) < 0) {
+ if (chan->fe->ops.release)
+ chan->fe->ops.release(chan->fe);
+ chan->fe = NULL;
+ }
+ }
+ if (chan->fe && ni->tuner_attach[nr])
+ if (ni->tuner_attach[nr] (chan) < 0) {
+ printk(KERN_ERR DEVICE_NAME
+ ": Tuner attach failed on channel %d!\n",
+ nr);
+ }
+ }
+ return ret;
+}
+
+static int init_channels(struct ngene *dev)
+{
+ int i, j;
+
+ for (i = 0; i < MAX_STREAM; i++) {
+ if (init_channel(&dev->channel[i]) < 0) {
+ for (j = i - 1; j >= 0; j--)
+ release_channel(&dev->channel[j]);
+ return -1;
+ }
+ }
+ return 0;
+}
+
+/****************************************************************************/
+/* device probe/remove calls ************************************************/
+/****************************************************************************/
+
+static void __devexit ngene_remove(struct pci_dev *pdev)
+{
+ struct ngene *dev = (struct ngene *)pci_get_drvdata(pdev);
+ int i;
+
+ tasklet_kill(&dev->event_tasklet);
+ for (i = MAX_STREAM - 1; i >= 0; i--)
+ release_channel(&dev->channel[i]);
+ ngene_stop(dev);
+ ngene_release_buffers(dev);
+ pci_set_drvdata(pdev, 0);
+ pci_disable_device(pdev);
+}
+
+static int __devinit ngene_probe(struct pci_dev *pci_dev,
+ const struct pci_device_id *id)
+{
+ struct ngene *dev;
+ int stat = 0;
+
+ if (pci_enable_device(pci_dev) < 0)
+ return -ENODEV;
+
+ dev = vmalloc(sizeof(struct ngene));
+ if (dev == NULL) {
+ stat = -ENOMEM;
+ goto fail0;
+ }
+ memset(dev, 0, sizeof(struct ngene));
+
+ dev->pci_dev = pci_dev;
+ dev->card_info = (struct ngene_info *)id->driver_data;
+ printk(KERN_INFO DEVICE_NAME ": Found %s\n", dev->card_info->name);
+
+ pci_set_drvdata(pci_dev, dev);
+
+ /* Alloc buffers and start nGene */
+ stat = ngene_get_buffers(dev);
+ if (stat < 0)
+ goto fail1;
+ stat = ngene_start(dev);
+ if (stat < 0)
+ goto fail1;
+
+ dev->i2c_current_bus = -1;
+
+ /* Register DVB adapters and devices for both channels */
+ if (init_channels(dev) < 0)
+ goto fail2;
+
+ return 0;
+
+fail2:
+ ngene_stop(dev);
+fail1:
+ ngene_release_buffers(dev);
+fail0:
+ pci_disable_device(pci_dev);
+ pci_set_drvdata(pci_dev, 0);
+ return stat;
+}
+
+/****************************************************************************/
+/* Card configs *************************************************************/
+/****************************************************************************/
+
+static struct stv090x_config fe_cineS2 = {
+ .device = STV0900,
+ .demod_mode = STV090x_DUAL,
+ .clk_mode = STV090x_CLK_EXT,
+
+ .xtal = 27000000,
+ .address = 0x68,
+
+ .ts1_mode = STV090x_TSMODE_SERIAL_PUNCTURED,
+ .ts2_mode = STV090x_TSMODE_SERIAL_PUNCTURED,
+
+ .repeater_level = STV090x_RPTLEVEL_16,
+
+ .adc1_range = STV090x_ADC_1Vpp,
+ .adc2_range = STV090x_ADC_1Vpp,
+
+ .diseqc_envelope_mode = true,
+};
+
+static struct stv6110x_config tuner_cineS2_0 = {
+ .addr = 0x60,
+ .refclk = 27000000,
+ .clk_div = 1,
+};
+
+static struct stv6110x_config tuner_cineS2_1 = {
+ .addr = 0x63,
+ .refclk = 27000000,
+ .clk_div = 1,
+};
+
+static struct ngene_info ngene_info_cineS2 = {
+ .type = NGENE_SIDEWINDER,
+ .name = "Linux4Media cineS2 DVB-S2 Twin Tuner",
+ .io_type = {NGENE_IO_TSIN, NGENE_IO_TSIN},
+ .demod_attach = {demod_attach_stv0900, demod_attach_stv0900},
+ .tuner_attach = {tuner_attach_stv6110, tuner_attach_stv6110},
+ .fe_config = {&fe_cineS2, &fe_cineS2},
+ .tuner_config = {&tuner_cineS2_0, &tuner_cineS2_1},
+ .lnb = {0x0b, 0x08},
+ .tsf = {3, 3},
+ .fw_version = 15,
+};
+
+static struct ngene_info ngene_info_satixs2 = {
+ .type = NGENE_SIDEWINDER,
+ .name = "Mystique SaTiX-S2 Dual",
+ .io_type = {NGENE_IO_TSIN, NGENE_IO_TSIN},
+ .demod_attach = {demod_attach_stv0900, demod_attach_stv0900},
+ .tuner_attach = {tuner_attach_stv6110, tuner_attach_stv6110},
+ .fe_config = {&fe_cineS2, &fe_cineS2},
+ .tuner_config = {&tuner_cineS2_0, &tuner_cineS2_1},
+ .lnb = {0x0b, 0x08},
+ .tsf = {3, 3},
+ .fw_version = 15,
+};
+
+/****************************************************************************/
+
+
+
+/****************************************************************************/
+/* PCI Subsystem ID *********************************************************/
+/****************************************************************************/
+
+#define NGENE_ID(_subvend, _subdev, _driverdata) { \
+ .vendor = NGENE_VID, .device = NGENE_PID, \
+ .subvendor = _subvend, .subdevice = _subdev, \
+ .driver_data = (unsigned long) &_driverdata }
+
+/****************************************************************************/
+
+static const struct pci_device_id ngene_id_tbl[] __devinitdata = {
+ NGENE_ID(0x18c3, 0xabc3, ngene_info_cineS2),
+ NGENE_ID(0x18c3, 0xabc4, ngene_info_cineS2),
+ NGENE_ID(0x18c3, 0xdb01, ngene_info_satixs2),
+ {0}
+};
+MODULE_DEVICE_TABLE(pci, ngene_id_tbl);
+
+/****************************************************************************/
+/* Init/Exit ****************************************************************/
+/****************************************************************************/
+
+static pci_ers_result_t ngene_error_detected(struct pci_dev *dev,
+ enum pci_channel_state state)
+{
+ printk(KERN_ERR DEVICE_NAME ": PCI error\n");
+ if (state == pci_channel_io_perm_failure)
+ return PCI_ERS_RESULT_DISCONNECT;
+ if (state == pci_channel_io_frozen)
+ return PCI_ERS_RESULT_NEED_RESET;
+ return PCI_ERS_RESULT_CAN_RECOVER;
+}
+
+static pci_ers_result_t ngene_link_reset(struct pci_dev *dev)
+{
+ printk(KERN_INFO DEVICE_NAME ": link reset\n");
+ return 0;
+}
+
+static pci_ers_result_t ngene_slot_reset(struct pci_dev *dev)
+{
+ printk(KERN_INFO DEVICE_NAME ": slot reset\n");
+ return 0;
+}
+
+static void ngene_resume(struct pci_dev *dev)
+{
+ printk(KERN_INFO DEVICE_NAME ": resume\n");
+}
+
+static struct pci_error_handlers ngene_errors = {
+ .error_detected = ngene_error_detected,
+ .link_reset = ngene_link_reset,
+ .slot_reset = ngene_slot_reset,
+ .resume = ngene_resume,
+};
+
+static struct pci_driver ngene_pci_driver = {
+ .name = "ngene",
+ .id_table = ngene_id_tbl,
+ .probe = ngene_probe,
+ .remove = __devexit_p(ngene_remove),
+ .err_handler = &ngene_errors,
+};
+
+static __init int module_init_ngene(void)
+{
+ printk(KERN_INFO
+ "nGene PCIE bridge driver, Copyright (C) 2005-2007 Micronas\n");
+ return pci_register_driver(&ngene_pci_driver);
+}
+
+static __exit void module_exit_ngene(void)
+{
+ pci_unregister_driver(&ngene_pci_driver);
+}
+
+module_init(module_init_ngene);
+module_exit(module_exit_ngene);
+
+MODULE_DESCRIPTION("nGene");
+MODULE_AUTHOR("Micronas, Ralph Metzler, Manfred Voelkel");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/ngene/ngene.h b/drivers/media/dvb/ngene/ngene.h
new file mode 100644
index 0000000..a7eb298
--- /dev/null
+++ b/drivers/media/dvb/ngene/ngene.h
@@ -0,0 +1,859 @@
+/*
+ * ngene.h: nGene PCIe bridge driver
+ *
+ * Copyright (C) 2005-2007 Micronas
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 only, as published by the Free Software Foundation.
+ *
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA
+ * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef _NGENE_H_
+#define _NGENE_H_
+
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <asm/dma.h>
+#include <linux/scatterlist.h>
+
+#include <linux/dvb/frontend.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_ringbuffer.h"
+
+#define NGENE_VID 0x18c3
+#define NGENE_PID 0x0720
+
+#ifndef VIDEO_CAP_VC1
+#define VIDEO_CAP_AVC 128
+#define VIDEO_CAP_H264 128
+#define VIDEO_CAP_VC1 256
+#define VIDEO_CAP_WMV9 256
+#define VIDEO_CAP_MPEG4 512
+#endif
+
+enum STREAM {
+ STREAM_VIDEOIN1 = 0, /* ITU656 or TS Input */
+ STREAM_VIDEOIN2,
+ STREAM_AUDIOIN1, /* I2S or SPI Input */
+ STREAM_AUDIOIN2,
+ STREAM_AUDIOOUT,
+ MAX_STREAM
+};
+
+enum SMODE_BITS {
+ SMODE_AUDIO_SPDIF = 0x20,
+ SMODE_AVSYNC = 0x10,
+ SMODE_TRANSPORT_STREAM = 0x08,
+ SMODE_AUDIO_CAPTURE = 0x04,
+ SMODE_VBI_CAPTURE = 0x02,
+ SMODE_VIDEO_CAPTURE = 0x01
+};
+
+enum STREAM_FLAG_BITS {
+ SFLAG_CHROMA_FORMAT_2COMP = 0x01, /* Chroma Format : 2's complement */
+ SFLAG_CHROMA_FORMAT_OFFSET = 0x00, /* Chroma Format : Binary offset */
+ SFLAG_ORDER_LUMA_CHROMA = 0x02, /* Byte order: Y,Cb,Y,Cr */
+ SFLAG_ORDER_CHROMA_LUMA = 0x00, /* Byte order: Cb,Y,Cr,Y */
+ SFLAG_COLORBAR = 0x04, /* Select colorbar */
+};
+
+#define PROGRAM_ROM 0x0000
+#define PROGRAM_SRAM 0x1000
+#define PERIPHERALS0 0x8000
+#define PERIPHERALS1 0x9000
+#define SHARED_BUFFER 0xC000
+
+#define HOST_TO_NGENE (SHARED_BUFFER+0x0000)
+#define NGENE_TO_HOST (SHARED_BUFFER+0x0100)
+#define NGENE_COMMAND (SHARED_BUFFER+0x0200)
+#define NGENE_COMMAND_HI (SHARED_BUFFER+0x0204)
+#define NGENE_STATUS (SHARED_BUFFER+0x0208)
+#define NGENE_STATUS_HI (SHARED_BUFFER+0x020C)
+#define NGENE_EVENT (SHARED_BUFFER+0x0210)
+#define NGENE_EVENT_HI (SHARED_BUFFER+0x0214)
+#define VARIABLES (SHARED_BUFFER+0x0210)
+
+#define NGENE_INT_COUNTS (SHARED_BUFFER+0x0260)
+#define NGENE_INT_ENABLE (SHARED_BUFFER+0x0264)
+#define NGENE_VBI_LINE_COUNT (SHARED_BUFFER+0x0268)
+
+#define BUFFER_GP_XMIT (SHARED_BUFFER+0x0800)
+#define BUFFER_GP_RECV (SHARED_BUFFER+0x0900)
+#define EEPROM_AREA (SHARED_BUFFER+0x0A00)
+
+#define SG_V_IN_1 (SHARED_BUFFER+0x0A80)
+#define SG_VBI_1 (SHARED_BUFFER+0x0B00)
+#define SG_A_IN_1 (SHARED_BUFFER+0x0B80)
+#define SG_V_IN_2 (SHARED_BUFFER+0x0C00)
+#define SG_VBI_2 (SHARED_BUFFER+0x0C80)
+#define SG_A_IN_2 (SHARED_BUFFER+0x0D00)
+#define SG_V_OUT (SHARED_BUFFER+0x0D80)
+#define SG_A_OUT2 (SHARED_BUFFER+0x0E00)
+
+#define DATA_A_IN_1 (SHARED_BUFFER+0x0E80)
+#define DATA_A_IN_2 (SHARED_BUFFER+0x0F00)
+#define DATA_A_OUT (SHARED_BUFFER+0x0F80)
+#define DATA_V_IN_1 (SHARED_BUFFER+0x1000)
+#define DATA_V_IN_2 (SHARED_BUFFER+0x2000)
+#define DATA_V_OUT (SHARED_BUFFER+0x3000)
+
+#define DATA_FIFO_AREA (SHARED_BUFFER+0x1000)
+
+#define TIMESTAMPS 0xA000
+#define SCRATCHPAD 0xA080
+#define FORCE_INT 0xA088
+#define FORCE_NMI 0xA090
+#define INT_STATUS 0xA0A0
+
+#define DEV_VER 0x9004
+
+#define FW_DEBUG_DEFAULT (PROGRAM_SRAM+0x00FF)
+
+struct SG_ADDR {
+ u64 start;
+ u64 curr;
+ u16 curr_ptr;
+ u16 elements;
+ u32 pad[3];
+} __attribute__ ((__packed__));
+
+struct SHARED_MEMORY {
+ /* C000 */
+ u32 HostToNgene[64];
+
+ /* C100 */
+ u32 NgeneToHost[64];
+
+ /* C200 */
+ u64 NgeneCommand;
+ u64 NgeneStatus;
+ u64 NgeneEvent;
+
+ /* C210 */
+ u8 pad1[0xc260 - 0xc218];
+
+ /* C260 */
+ u32 IntCounts;
+ u32 IntEnable;
+
+ /* C268 */
+ u8 pad2[0xd000 - 0xc268];
+
+} __attribute__ ((__packed__));
+
+struct BUFFER_STREAM_RESULTS {
+ u32 Clock; /* Stream time in 100ns units */
+ u16 RemainingLines; /* Remaining lines in this field.
+ 0 for complete field */
+ u8 FieldCount; /* Video field number */
+ u8 Flags; /* Bit 7 = Done, Bit 6 = seen, Bit 5 = overflow,
+ Bit 0 = FieldID */
+ u16 BlockCount; /* Audio block count (unused) */
+ u8 Reserved[2];
+ u32 DTOUpdate;
+} __attribute__ ((__packed__));
+
+struct HW_SCATTER_GATHER_ELEMENT {
+ u64 Address;
+ u32 Length;
+ u32 Reserved;
+} __attribute__ ((__packed__));
+
+struct BUFFER_HEADER {
+ u64 Next;
+ struct BUFFER_STREAM_RESULTS SR;
+
+ u32 Number_of_entries_1;
+ u32 Reserved5;
+ u64 Address_of_first_entry_1;
+
+ u32 Number_of_entries_2;
+ u32 Reserved7;
+ u64 Address_of_first_entry_2;
+} __attribute__ ((__packed__));
+
+struct EVENT_BUFFER {
+ u32 TimeStamp;
+ u8 GPIOStatus;
+ u8 UARTStatus;
+ u8 RXCharacter;
+ u8 EventStatus;
+ u32 Reserved[2];
+} __attribute__ ((__packed__));
+
+/* Firmware commands. */
+
+enum OPCODES {
+ CMD_NOP = 0,
+ CMD_FWLOAD_PREPARE = 0x01,
+ CMD_FWLOAD_FINISH = 0x02,
+ CMD_I2C_READ = 0x03,
+ CMD_I2C_WRITE = 0x04,
+
+ CMD_I2C_WRITE_NOSTOP = 0x05,
+ CMD_I2C_CONTINUE_WRITE = 0x06,
+ CMD_I2C_CONTINUE_WRITE_NOSTOP = 0x07,
+
+ CMD_DEBUG_OUTPUT = 0x09,
+
+ CMD_CONTROL = 0x10,
+ CMD_CONFIGURE_BUFFER = 0x11,
+ CMD_CONFIGURE_FREE_BUFFER = 0x12,
+
+ CMD_SPI_READ = 0x13,
+ CMD_SPI_WRITE = 0x14,
+
+ CMD_MEM_READ = 0x20,
+ CMD_MEM_WRITE = 0x21,
+ CMD_SFR_READ = 0x22,
+ CMD_SFR_WRITE = 0x23,
+ CMD_IRAM_READ = 0x24,
+ CMD_IRAM_WRITE = 0x25,
+ CMD_SET_GPIO_PIN = 0x26,
+ CMD_SET_GPIO_INT = 0x27,
+ CMD_CONFIGURE_UART = 0x28,
+ CMD_WRITE_UART = 0x29,
+ MAX_CMD
+};
+
+enum RESPONSES {
+ OK = 0,
+ ERROR = 1
+};
+
+struct FW_HEADER {
+ u8 Opcode;
+ u8 Length;
+} __attribute__ ((__packed__));
+
+struct FW_I2C_WRITE {
+ struct FW_HEADER hdr;
+ u8 Device;
+ u8 Data[250];
+} __attribute__ ((__packed__));
+
+struct FW_I2C_CONTINUE_WRITE {
+ struct FW_HEADER hdr;
+ u8 Data[250];
+} __attribute__ ((__packed__));
+
+struct FW_I2C_READ {
+ struct FW_HEADER hdr;
+ u8 Device;
+ u8 Data[252]; /* followed by two bytes of read data count */
+} __attribute__ ((__packed__));
+
+struct FW_SPI_WRITE {
+ struct FW_HEADER hdr;
+ u8 ModeSelect;
+ u8 Data[250];
+} __attribute__ ((__packed__));
+
+struct FW_SPI_READ {
+ struct FW_HEADER hdr;
+ u8 ModeSelect;
+ u8 Data[252]; /* followed by two bytes of read data count */
+} __attribute__ ((__packed__));
+
+struct FW_FWLOAD_PREPARE {
+ struct FW_HEADER hdr;
+} __attribute__ ((__packed__));
+
+struct FW_FWLOAD_FINISH {
+ struct FW_HEADER hdr;
+ u16 Address; /* address of final block */
+ u16 Length;
+} __attribute__ ((__packed__));
+
+/*
+ * Meaning of FW_STREAM_CONTROL::Mode bits:
+ * Bit 7: Loopback PEXin to PEXout using TVOut channel
+ * Bit 6: AVLOOP
+ * Bit 5: Audio select; 0=I2S, 1=SPDIF
+ * Bit 4: AVSYNC
+ * Bit 3: Enable transport stream
+ * Bit 2: Enable audio capture
+ * Bit 1: Enable ITU-Video VBI capture
+ * Bit 0: Enable ITU-Video capture
+ *
+ * Meaning of FW_STREAM_CONTROL::Control bits (see UVI1_CTL)
+ * Bit 7: continuous capture
+ * Bit 6: capture one field
+ * Bit 5: capture one frame
+ * Bit 4: unused
+ * Bit 3: starting field; 0=odd, 1=even
+ * Bit 2: sample size; 0=8-bit, 1=10-bit
+ * Bit 1: data format; 0=UYVY, 1=YUY2
+ * Bit 0: resets buffer pointers
+*/
+
+enum FSC_MODE_BITS {
+ SMODE_LOOPBACK = 0x80,
+ SMODE_AVLOOP = 0x40,
+ _SMODE_AUDIO_SPDIF = 0x20,
+ _SMODE_AVSYNC = 0x10,
+ _SMODE_TRANSPORT_STREAM = 0x08,
+ _SMODE_AUDIO_CAPTURE = 0x04,
+ _SMODE_VBI_CAPTURE = 0x02,
+ _SMODE_VIDEO_CAPTURE = 0x01
+};
+
+
+/* Meaning of FW_STREAM_CONTROL::Stream bits:
+ * Bit 3: Audio sample count: 0 = relative, 1 = absolute
+ * Bit 2: color bar select; 1=color bars, 0=CV3 decoder
+ * Bits 1-0: stream select, UVI1, UVI2, TVOUT
+ */
+
+struct FW_STREAM_CONTROL {
+ struct FW_HEADER hdr;
+ u8 Stream; /* Stream number (UVI1, UVI2, TVOUT) */
+ u8 Control; /* Value written to UVI1_CTL */
+ u8 Mode; /* Controls clock source */
+ u8 SetupDataLen; /* Length of setup data, MSB=1 write
+ backwards */
+ u16 CaptureBlockCount; /* Blocks (a 256 Bytes) to capture per buffer
+ for TS and Audio */
+ u64 Buffer_Address; /* Address of first buffer header */
+ u16 BytesPerVideoLine;
+ u16 MaxLinesPerField;
+ u16 MinLinesPerField;
+ u16 Reserved_1;
+ u16 BytesPerVBILine;
+ u16 MaxVBILinesPerField;
+ u16 MinVBILinesPerField;
+ u16 SetupDataAddr; /* ngene relative address of setup data */
+ u8 SetupData[32]; /* setup data */
+} __attribute__((__packed__));
+
+#define AUDIO_BLOCK_SIZE 256
+#define TS_BLOCK_SIZE 256
+
+struct FW_MEM_READ {
+ struct FW_HEADER hdr;
+ u16 address;
+} __attribute__ ((__packed__));
+
+struct FW_MEM_WRITE {
+ struct FW_HEADER hdr;
+ u16 address;
+ u8 data;
+} __attribute__ ((__packed__));
+
+struct FW_SFR_IRAM_READ {
+ struct FW_HEADER hdr;
+ u8 address;
+} __attribute__ ((__packed__));
+
+struct FW_SFR_IRAM_WRITE {
+ struct FW_HEADER hdr;
+ u8 address;
+ u8 data;
+} __attribute__ ((__packed__));
+
+struct FW_SET_GPIO_PIN {
+ struct FW_HEADER hdr;
+ u8 select;
+} __attribute__ ((__packed__));
+
+struct FW_SET_GPIO_INT {
+ struct FW_HEADER hdr;
+ u8 select;
+} __attribute__ ((__packed__));
+
+struct FW_SET_DEBUGMODE {
+ struct FW_HEADER hdr;
+ u8 debug_flags;
+} __attribute__ ((__packed__));
+
+struct FW_CONFIGURE_BUFFERS {
+ struct FW_HEADER hdr;
+ u8 config;
+} __attribute__ ((__packed__));
+
+enum _BUFFER_CONFIGS {
+ /* 4k UVI1, 4k UVI2, 2k AUD1, 2k AUD2 (standard usage) */
+ BUFFER_CONFIG_4422 = 0,
+ /* 3k UVI1, 3k UVI2, 3k AUD1, 3k AUD2 (4x TS input usage) */
+ BUFFER_CONFIG_3333 = 1,
+ /* 8k UVI1, 0k UVI2, 2k AUD1, 2k I2SOut (HDTV decoder usage) */
+ BUFFER_CONFIG_8022 = 2,
+ BUFFER_CONFIG_FW17 = 255, /* Use new FW 17 command */
+};
+
+struct FW_CONFIGURE_FREE_BUFFERS {
+ struct FW_HEADER hdr;
+ u8 UVI1_BufferLength;
+ u8 UVI2_BufferLength;
+ u8 TVO_BufferLength;
+ u8 AUD1_BufferLength;
+ u8 AUD2_BufferLength;
+ u8 TVA_BufferLength;
+} __attribute__ ((__packed__));
+
+struct FW_CONFIGURE_UART {
+ struct FW_HEADER hdr;
+ u8 UartControl;
+} __attribute__ ((__packed__));
+
+enum _UART_CONFIG {
+ _UART_BAUDRATE_19200 = 0,
+ _UART_BAUDRATE_9600 = 1,
+ _UART_BAUDRATE_4800 = 2,
+ _UART_BAUDRATE_2400 = 3,
+ _UART_RX_ENABLE = 0x40,
+ _UART_TX_ENABLE = 0x80,
+};
+
+struct FW_WRITE_UART {
+ struct FW_HEADER hdr;
+ u8 Data[252];
+} __attribute__ ((__packed__));
+
+
+struct ngene_command {
+ u32 in_len;
+ u32 out_len;
+ union {
+ u32 raw[64];
+ u8 raw8[256];
+ struct FW_HEADER hdr;
+ struct FW_I2C_WRITE I2CWrite;
+ struct FW_I2C_CONTINUE_WRITE I2CContinueWrite;
+ struct FW_I2C_READ I2CRead;
+ struct FW_STREAM_CONTROL StreamControl;
+ struct FW_FWLOAD_PREPARE FWLoadPrepare;
+ struct FW_FWLOAD_FINISH FWLoadFinish;
+ struct FW_MEM_READ MemoryRead;
+ struct FW_MEM_WRITE MemoryWrite;
+ struct FW_SFR_IRAM_READ SfrIramRead;
+ struct FW_SFR_IRAM_WRITE SfrIramWrite;
+ struct FW_SPI_WRITE SPIWrite;
+ struct FW_SPI_READ SPIRead;
+ struct FW_SET_GPIO_PIN SetGpioPin;
+ struct FW_SET_GPIO_INT SetGpioInt;
+ struct FW_SET_DEBUGMODE SetDebugMode;
+ struct FW_CONFIGURE_BUFFERS ConfigureBuffers;
+ struct FW_CONFIGURE_FREE_BUFFERS ConfigureFreeBuffers;
+ struct FW_CONFIGURE_UART ConfigureUart;
+ struct FW_WRITE_UART WriteUart;
+ } cmd;
+} __attribute__ ((__packed__));
+
+#define NGENE_INTERFACE_VERSION 0x103
+#define MAX_VIDEO_BUFFER_SIZE (417792) /* 288*1440 rounded up to next page */
+#define MAX_AUDIO_BUFFER_SIZE (8192) /* Gives room for about 23msec@48KHz */
+#define MAX_VBI_BUFFER_SIZE (28672) /* 1144*18 rounded up to next page */
+#define MAX_TS_BUFFER_SIZE (98304) /* 512*188 rounded up to next page */
+#define MAX_HDTV_BUFFER_SIZE (2080768) /* 541*1920*2 rounded up to next page
+ Max: (1920x1080i60) */
+
+#define OVERFLOW_BUFFER_SIZE (8192)
+
+#define RING_SIZE_VIDEO 4
+#define RING_SIZE_AUDIO 8
+#define RING_SIZE_TS 8
+
+#define NUM_SCATTER_GATHER_ENTRIES 8
+
+#define MAX_DMA_LENGTH (((MAX_VIDEO_BUFFER_SIZE + MAX_VBI_BUFFER_SIZE) * \
+ RING_SIZE_VIDEO * 2) + \
+ (MAX_AUDIO_BUFFER_SIZE * RING_SIZE_AUDIO * 2) + \
+ (MAX_TS_BUFFER_SIZE * RING_SIZE_TS * 4) + \
+ (RING_SIZE_VIDEO * PAGE_SIZE * 2) + \
+ (RING_SIZE_AUDIO * PAGE_SIZE * 2) + \
+ (RING_SIZE_TS * PAGE_SIZE * 4) + \
+ 8 * PAGE_SIZE + OVERFLOW_BUFFER_SIZE + PAGE_SIZE)
+
+#define EVENT_QUEUE_SIZE 16
+
+/* Gathers the current state of a single channel. */
+
+struct SBufferHeader {
+ struct BUFFER_HEADER ngeneBuffer; /* Physical descriptor */
+ struct SBufferHeader *Next;
+ void *Buffer1;
+ struct HW_SCATTER_GATHER_ELEMENT *scList1;
+ void *Buffer2;
+ struct HW_SCATTER_GATHER_ELEMENT *scList2;
+};
+
+/* Sizeof SBufferHeader aligned to next 64 Bit boundary (hw restriction) */
+#define SIZEOF_SBufferHeader ((sizeof(struct SBufferHeader) + 63) & ~63)
+
+enum HWSTATE {
+ HWSTATE_STOP,
+ HWSTATE_STARTUP,
+ HWSTATE_RUN,
+ HWSTATE_PAUSE,
+};
+
+enum KSSTATE {
+ KSSTATE_STOP,
+ KSSTATE_ACQUIRE,
+ KSSTATE_PAUSE,
+ KSSTATE_RUN,
+};
+
+struct SRingBufferDescriptor {
+ struct SBufferHeader *Head; /* Points to first buffer in ring buffer
+ structure*/
+ u64 PAHead; /* Physical address of first buffer */
+ u32 MemSize; /* Memory size of allocated ring buffers
+ (needed for freeing) */
+ u32 NumBuffers; /* Number of buffers in the ring */
+ u32 Buffer1Length; /* Allocated length of Buffer 1 */
+ u32 Buffer2Length; /* Allocated length of Buffer 2 */
+ void *SCListMem; /* Memory to hold scatter gather lists for this
+ ring */
+ u64 PASCListMem; /* Physical address .. */
+ u32 SCListMemSize; /* Size of this memory */
+};
+
+enum STREAMMODEFLAGS {
+ StreamMode_NONE = 0, /* Stream not used */
+ StreamMode_ANALOG = 1, /* Analog: Stream 0,1 = Video, 2,3 = Audio */
+ StreamMode_TSIN = 2, /* Transport stream input (all) */
+ StreamMode_HDTV = 4, /* HDTV: Maximum 1920x1080p30,1920x1080i60
+ (only stream 0) */
+ StreamMode_TSOUT = 8, /* Transport stream output (only stream 3) */
+};
+
+
+enum BufferExchangeFlags {
+ BEF_EVEN_FIELD = 0x00000001,
+ BEF_CONTINUATION = 0x00000002,
+ BEF_MORE_DATA = 0x00000004,
+ BEF_OVERFLOW = 0x00000008,
+ DF_SWAP32 = 0x00010000,
+};
+
+typedef void *(IBufferExchange)(void *, void *, u32, u32, u32);
+
+struct MICI_STREAMINFO {
+ IBufferExchange *pExchange;
+ IBufferExchange *pExchangeVBI; /* Secondary (VBI, ancillary) */
+ u8 Stream;
+ u8 Flags;
+ u8 Mode;
+ u8 Reserved;
+ u16 nLinesVideo;
+ u16 nBytesPerLineVideo;
+ u16 nLinesVBI;
+ u16 nBytesPerLineVBI;
+ u32 CaptureLength; /* Used for audio and transport stream */
+};
+
+/****************************************************************************/
+/* STRUCTS ******************************************************************/
+/****************************************************************************/
+
+/* sound hardware definition */
+#define MIXER_ADDR_TVTUNER 0
+#define MIXER_ADDR_LAST 0
+
+struct ngene_channel;
+
+/*struct sound chip*/
+
+struct mychip {
+ struct ngene_channel *chan;
+ struct snd_card *card;
+ struct pci_dev *pci;
+ struct snd_pcm_substream *substream;
+ struct snd_pcm *pcm;
+ unsigned long port;
+ int irq;
+ spinlock_t mixer_lock;
+ spinlock_t lock;
+ int mixer_volume[MIXER_ADDR_LAST + 1][2];
+ int capture_source[MIXER_ADDR_LAST + 1][2];
+};
+
+#ifdef NGENE_V4L
+struct ngene_overlay {
+ int tvnorm;
+ struct v4l2_rect w;
+ enum v4l2_field field;
+ struct v4l2_clip *clips;
+ int nclips;
+ int setup_ok;
+};
+
+struct ngene_tvnorm {
+ int v4l2_id;
+ char *name;
+ u16 swidth, sheight; /* scaled standard width, height */
+ int tuner_norm;
+ int soundstd;
+};
+
+struct ngene_vopen {
+ struct ngene_channel *ch;
+ enum v4l2_priority prio;
+ int width;
+ int height;
+ int depth;
+ struct videobuf_queue vbuf_q;
+ struct videobuf_queue vbi;
+ int fourcc;
+ int picxcount;
+ int resources;
+ enum v4l2_buf_type type;
+ const struct ngene_format *fmt;
+
+ const struct ngene_format *ovfmt;
+ struct ngene_overlay ov;
+};
+#endif
+
+struct ngene_channel {
+ struct device device;
+ struct i2c_adapter i2c_adapter;
+
+ struct ngene *dev;
+ int number;
+ int type;
+ int mode;
+
+ struct dvb_frontend *fe;
+ struct dmxdev dmxdev;
+ struct dvb_demux demux;
+ struct dmx_frontend hw_frontend;
+ struct dmx_frontend mem_frontend;
+ int users;
+ struct video_device *v4l_dev;
+ struct tasklet_struct demux_tasklet;
+
+ struct SBufferHeader *nextBuffer;
+ enum KSSTATE State;
+ enum HWSTATE HWState;
+ u8 Stream;
+ u8 Flags;
+ u8 Mode;
+ IBufferExchange *pBufferExchange;
+ IBufferExchange *pBufferExchange2;
+
+ spinlock_t state_lock;
+ u16 nLines;
+ u16 nBytesPerLine;
+ u16 nVBILines;
+ u16 nBytesPerVBILine;
+ u16 itumode;
+ u32 Capture1Length;
+ u32 Capture2Length;
+ struct SRingBufferDescriptor RingBuffer;
+ struct SRingBufferDescriptor TSRingBuffer;
+ struct SRingBufferDescriptor TSIdleBuffer;
+
+ u32 DataFormatFlags;
+
+ int AudioDTOUpdated;
+ u32 AudioDTOValue;
+
+ int (*set_tone)(struct dvb_frontend *, fe_sec_tone_mode_t);
+ u8 lnbh;
+
+ /* stuff from analog driver */
+
+ int minor;
+ struct mychip *mychip;
+ struct snd_card *soundcard;
+ u8 *evenbuffer;
+ u8 dma_on;
+ int soundstreamon;
+ int audiomute;
+ int soundbuffisallocated;
+ int sndbuffflag;
+ int tun_rdy;
+ int dec_rdy;
+ int tun_dec_rdy;
+ int lastbufferflag;
+
+ struct ngene_tvnorm *tvnorms;
+ int tvnorm_num;
+ int tvnorm;
+
+#ifdef NGENE_V4L
+ int videousers;
+ struct v4l2_prio_state prio;
+ struct ngene_vopen init;
+ int resources;
+ struct v4l2_framebuffer fbuf;
+ struct ngene_buffer *screen; /* overlay */
+ struct list_head capture; /* video capture queue */
+ spinlock_t s_lock;
+ struct semaphore reslock;
+#endif
+
+ int running;
+};
+
+struct ngene;
+
+typedef void (rx_cb_t)(struct ngene *, u32, u8);
+typedef void (tx_cb_t)(struct ngene *, u32);
+
+struct ngene {
+ int nr;
+ struct pci_dev *pci_dev;
+ unsigned char *iomem;
+
+ /*struct i2c_adapter i2c_adapter;*/
+
+ u32 device_version;
+ u32 fw_interface_version;
+ u32 icounts;
+
+ u8 *CmdDoneByte;
+ int BootFirmware;
+ void *OverflowBuffer;
+ dma_addr_t PAOverflowBuffer;
+ void *FWInterfaceBuffer;
+ dma_addr_t PAFWInterfaceBuffer;
+ u8 *ngenetohost;
+ u8 *hosttongene;
+
+ struct EVENT_BUFFER EventQueue[EVENT_QUEUE_SIZE];
+ int EventQueueOverflowCount;
+ int EventQueueOverflowFlag;
+ struct tasklet_struct event_tasklet;
+ struct EVENT_BUFFER *EventBuffer;
+ int EventQueueWriteIndex;
+ int EventQueueReadIndex;
+
+ wait_queue_head_t cmd_wq;
+ int cmd_done;
+ struct semaphore cmd_mutex;
+ struct semaphore stream_mutex;
+ struct semaphore pll_mutex;
+ struct semaphore i2c_switch_mutex;
+ int i2c_current_channel;
+ int i2c_current_bus;
+ spinlock_t cmd_lock;
+
+ struct dvb_adapter adapter[MAX_STREAM];
+ struct ngene_channel channel[MAX_STREAM];
+
+ struct ngene_info *card_info;
+
+ tx_cb_t *TxEventNotify;
+ rx_cb_t *RxEventNotify;
+ int tx_busy;
+ wait_queue_head_t tx_wq;
+ wait_queue_head_t rx_wq;
+#define UART_RBUF_LEN 4096
+ u8 uart_rbuf[UART_RBUF_LEN];
+ int uart_rp, uart_wp;
+
+ u8 *tsout_buf;
+#define TSOUT_BUF_SIZE (512*188*8)
+ struct dvb_ringbuffer tsout_rbuf;
+
+ u8 *ain_buf;
+#define AIN_BUF_SIZE (128*1024)
+ struct dvb_ringbuffer ain_rbuf;
+
+
+ u8 *vin_buf;
+#define VIN_BUF_SIZE (4*1920*1080)
+ struct dvb_ringbuffer vin_rbuf;
+
+ unsigned long exp_val;
+ int prev_cmd;
+};
+
+struct ngene_info {
+ int type;
+#define NGENE_APP 0
+#define NGENE_TERRATEC 1
+#define NGENE_SIDEWINDER 2
+#define NGENE_RACER 3
+#define NGENE_VIPER 4
+#define NGENE_PYTHON 5
+#define NGENE_VBOX_V1 6
+#define NGENE_VBOX_V2 7
+
+ int fw_version;
+ char *name;
+
+ int io_type[MAX_STREAM];
+#define NGENE_IO_NONE 0
+#define NGENE_IO_TV 1
+#define NGENE_IO_HDTV 2
+#define NGENE_IO_TSIN 4
+#define NGENE_IO_TSOUT 8
+#define NGENE_IO_AIN 16
+
+ void *fe_config[4];
+ void *tuner_config[4];
+
+ int (*demod_attach[4])(struct ngene_channel *);
+ int (*tuner_attach[4])(struct ngene_channel *);
+
+ u8 avf[4];
+ u8 msp[4];
+ u8 demoda[4];
+ u8 lnb[4];
+ int i2c_access;
+ u8 ntsc;
+ u8 tsf[4];
+ u8 i2s[4];
+
+ int (*gate_ctrl)(struct dvb_frontend *, int);
+ int (*switch_ctrl)(struct ngene_channel *, int, int);
+};
+
+#ifdef NGENE_V4L
+struct ngene_format{
+ char *name;
+ int fourcc; /* video4linux 2 */
+ int btformat; /* BT848_COLOR_FMT_* */
+ int format;
+ int btswap; /* BT848_COLOR_CTL_* */
+ int depth; /* bit/pixel */
+ int flags;
+ int hshift, vshift; /* for planar modes */
+ int palette;
+};
+
+#define RESOURCE_OVERLAY 1
+#define RESOURCE_VIDEO 2
+#define RESOURCE_VBI 4
+
+struct ngene_buffer {
+ /* common v4l buffer stuff -- must be first */
+ struct videobuf_buffer vb;
+
+ /* ngene specific */
+ const struct ngene_format *fmt;
+ int tvnorm;
+ int btformat;
+ int btswap;
+};
+#endif
+
+
+#endif
+
+/* LocalWords: Endif
+ */
diff --git a/drivers/media/dvb/siano/sms-cards.c b/drivers/media/dvb/siano/sms-cards.c
index 1067b22..cff77e2 100644
--- a/drivers/media/dvb/siano/sms-cards.c
+++ b/drivers/media/dvb/siano/sms-cards.c
@@ -62,6 +62,7 @@
[SMS1XXX_BOARD_HAUPPAUGE_WINDHAM] = {
.name = "Hauppauge WinTV MiniStick",
.type = SMS_NOVA_B0,
+ .fw[DEVICE_MODE_ISDBT_BDA] = "sms1xxx-hcw-55xxx-isdbt-02.fw",
.fw[DEVICE_MODE_DVBT_BDA] = "sms1xxx-hcw-55xxx-dvbt-02.fw",
.board_cfg.leds_power = 26,
.board_cfg.led0 = 27,
diff --git a/drivers/media/dvb/siano/smscoreapi.c b/drivers/media/dvb/siano/smscoreapi.c
index ca758bc..4bfd345 100644
--- a/drivers/media/dvb/siano/smscoreapi.c
+++ b/drivers/media/dvb/siano/smscoreapi.c
@@ -1459,8 +1459,10 @@
if (!(coredev->device_flags & SMS_DEVICE_FAMILY2)) {
pMsg->xMsgHeader.msgType = MSG_SMS_GPIO_CONFIG_REQ;
if (GetGpioPinParams(PinNum, &TranslatedPinNum, &GroupNum,
- &groupCfg) != 0)
- return -EINVAL;
+ &groupCfg) != 0) {
+ rc = -EINVAL;
+ goto free;
+ }
pMsg->msgData[1] = TranslatedPinNum;
pMsg->msgData[2] = GroupNum;
@@ -1490,6 +1492,7 @@
else
sms_err("smscore_gpio_configure error");
}
+free:
kfree(buffer);
return rc;
diff --git a/drivers/media/dvb/siano/smscoreapi.h b/drivers/media/dvb/siano/smscoreapi.h
index eec18aa..8ecadec 100644
--- a/drivers/media/dvb/siano/smscoreapi.h
+++ b/drivers/media/dvb/siano/smscoreapi.h
@@ -212,6 +212,8 @@
#define MSG_SMS_DAB_CHANNEL 607
#define MSG_SMS_GET_PID_FILTER_LIST_REQ 608
#define MSG_SMS_GET_PID_FILTER_LIST_RES 609
+#define MSG_SMS_GET_STATISTICS_RES 616
+#define MSG_SMS_GET_STATISTICS_REQ 615
#define MSG_SMS_HO_PER_SLICES_IND 630
#define MSG_SMS_SET_ANTENNA_CONFIG_REQ 651
#define MSG_SMS_SET_ANTENNA_CONFIG_RES 652
@@ -339,7 +341,7 @@
/* Statistics information returned as response for
* SmsHostApiGetStatistics_Req */
-struct SMSHOSTLIB_STATISTICS_S {
+struct SMSHOSTLIB_STATISTICS_ST {
u32 Reserved; /* Reserved */
/* Common parameters */
@@ -424,6 +426,79 @@
u32 ReservedFields[10]; /* Reserved */
};
+struct SmsMsgStatisticsInfo_ST {
+ u32 RequestResult;
+
+ struct SMSHOSTLIB_STATISTICS_ST Stat;
+
+ /* Split the calc of the SNR in DAB */
+ u32 Signal; /* dB */
+ u32 Noise; /* dB */
+
+};
+
+struct SMSHOSTLIB_ISDBT_LAYER_STAT_ST {
+ /* Per-layer information */
+ u32 CodeRate; /* Code Rate from SMSHOSTLIB_CODE_RATE_ET,
+ * 255 means layer does not exist */
+ u32 Constellation; /* Constellation from SMSHOSTLIB_CONSTELLATION_ET,
+ * 255 means layer does not exist */
+ u32 BER; /* Post Viterbi BER [1E-5], 0xFFFFFFFF indicate N/A */
+ u32 BERErrorCount; /* Post Viterbi Error Bits Count */
+ u32 BERBitCount; /* Post Viterbi Total Bits Count */
+ u32 PreBER; /* Pre Viterbi BER [1E-5], 0xFFFFFFFF indicate N/A */
+ u32 TS_PER; /* Transport stream PER [%], 0xFFFFFFFF indicate N/A */
+ u32 ErrorTSPackets; /* Number of erroneous transport-stream packets */
+ u32 TotalTSPackets; /* Total number of transport-stream packets */
+ u32 TILdepthI; /* Time interleaver depth I parameter,
+ * 255 means layer does not exist */
+ u32 NumberOfSegments; /* Number of segments in layer A,
+ * 255 means layer does not exist */
+ u32 TMCCErrors; /* TMCC errors */
+};
+
+struct SMSHOSTLIB_STATISTICS_ISDBT_ST {
+ u32 StatisticsType; /* Enumerator identifying the type of the
+ * structure. Values are the same as
+ * SMSHOSTLIB_DEVICE_MODES_E
+ *
+ * This field MUST always be first in any
+ * statistics structure */
+
+ u32 FullSize; /* Total size of the structure returned by the modem.
+ * If the size requested by the host is smaller than
+ * FullSize, the struct will be truncated */
+
+ /* Common parameters */
+ u32 IsRfLocked; /* 0 - not locked, 1 - locked */
+ u32 IsDemodLocked; /* 0 - not locked, 1 - locked */
+ u32 IsExternalLNAOn; /* 0 - external LNA off, 1 - external LNA on */
+
+ /* Reception quality */
+ s32 SNR; /* dB */
+ s32 RSSI; /* dBm */
+ s32 InBandPwr; /* In band power in dBM */
+ s32 CarrierOffset; /* Carrier Offset in Hz */
+
+ /* Transmission parameters */
+ u32 Frequency; /* Frequency in Hz */
+ u32 Bandwidth; /* Bandwidth in MHz */
+ u32 TransmissionMode; /* ISDB-T transmission mode */
+ u32 ModemState; /* 0 - Acquisition, 1 - Locked */
+ u32 GuardInterval; /* Guard Interval, 1 divided by value */
+ u32 SystemType; /* ISDB-T system type (ISDB-T / ISDB-Tsb) */
+ u32 PartialReception; /* TRUE - partial reception, FALSE otherwise */
+ u32 NumOfLayers; /* Number of ISDB-T layers in the network */
+
+ /* Per-layer information */
+ /* Layers A, B and C */
+ struct SMSHOSTLIB_ISDBT_LAYER_STAT_ST LayerInfo[3];
+ /* Per-layer statistics, see SMSHOSTLIB_ISDBT_LAYER_STAT_ST */
+
+ /* Interface information */
+ u32 SmsToHostTxErrors; /* Total number of transmission errors. */
+};
+
struct PID_STATISTICS_DATA_S {
struct PID_BURST_S {
u32 size;
diff --git a/drivers/media/dvb/siano/smsdvb.c b/drivers/media/dvb/siano/smsdvb.c
index 68bf9fb..5f39398 100644
--- a/drivers/media/dvb/siano/smsdvb.c
+++ b/drivers/media/dvb/siano/smsdvb.c
@@ -116,6 +116,118 @@
}
}
+
+static void smsdvb_update_dvb_stats(struct RECEPTION_STATISTICS_S *pReceptionData,
+ struct SMSHOSTLIB_STATISTICS_ST *p)
+{
+ if (sms_dbg & 2) {
+ printk(KERN_DEBUG "Reserved = %d", p->Reserved);
+ printk(KERN_DEBUG "IsRfLocked = %d", p->IsRfLocked);
+ printk(KERN_DEBUG "IsDemodLocked = %d", p->IsDemodLocked);
+ printk(KERN_DEBUG "IsExternalLNAOn = %d", p->IsExternalLNAOn);
+ printk(KERN_DEBUG "SNR = %d", p->SNR);
+ printk(KERN_DEBUG "BER = %d", p->BER);
+ printk(KERN_DEBUG "FIB_CRC = %d", p->FIB_CRC);
+ printk(KERN_DEBUG "TS_PER = %d", p->TS_PER);
+ printk(KERN_DEBUG "MFER = %d", p->MFER);
+ printk(KERN_DEBUG "RSSI = %d", p->RSSI);
+ printk(KERN_DEBUG "InBandPwr = %d", p->InBandPwr);
+ printk(KERN_DEBUG "CarrierOffset = %d", p->CarrierOffset);
+ printk(KERN_DEBUG "Frequency = %d", p->Frequency);
+ printk(KERN_DEBUG "Bandwidth = %d", p->Bandwidth);
+ printk(KERN_DEBUG "TransmissionMode = %d", p->TransmissionMode);
+ printk(KERN_DEBUG "ModemState = %d", p->ModemState);
+ printk(KERN_DEBUG "GuardInterval = %d", p->GuardInterval);
+ printk(KERN_DEBUG "CodeRate = %d", p->CodeRate);
+ printk(KERN_DEBUG "LPCodeRate = %d", p->LPCodeRate);
+ printk(KERN_DEBUG "Hierarchy = %d", p->Hierarchy);
+ printk(KERN_DEBUG "Constellation = %d", p->Constellation);
+ printk(KERN_DEBUG "BurstSize = %d", p->BurstSize);
+ printk(KERN_DEBUG "BurstDuration = %d", p->BurstDuration);
+ printk(KERN_DEBUG "BurstCycleTime = %d", p->BurstCycleTime);
+ printk(KERN_DEBUG "CalculatedBurstCycleTime = %d", p->CalculatedBurstCycleTime);
+ printk(KERN_DEBUG "NumOfRows = %d", p->NumOfRows);
+ printk(KERN_DEBUG "NumOfPaddCols = %d", p->NumOfPaddCols);
+ printk(KERN_DEBUG "NumOfPunctCols = %d", p->NumOfPunctCols);
+ printk(KERN_DEBUG "ErrorTSPackets = %d", p->ErrorTSPackets);
+ printk(KERN_DEBUG "TotalTSPackets = %d", p->TotalTSPackets);
+ printk(KERN_DEBUG "NumOfValidMpeTlbs = %d", p->NumOfValidMpeTlbs);
+ printk(KERN_DEBUG "NumOfInvalidMpeTlbs = %d", p->NumOfInvalidMpeTlbs);
+ printk(KERN_DEBUG "NumOfCorrectedMpeTlbs = %d", p->NumOfCorrectedMpeTlbs);
+ printk(KERN_DEBUG "BERErrorCount = %d", p->BERErrorCount);
+ printk(KERN_DEBUG "BERBitCount = %d", p->BERBitCount);
+ printk(KERN_DEBUG "SmsToHostTxErrors = %d", p->SmsToHostTxErrors);
+ printk(KERN_DEBUG "PreBER = %d", p->PreBER);
+ printk(KERN_DEBUG "CellId = %d", p->CellId);
+ printk(KERN_DEBUG "DvbhSrvIndHP = %d", p->DvbhSrvIndHP);
+ printk(KERN_DEBUG "DvbhSrvIndLP = %d", p->DvbhSrvIndLP);
+ printk(KERN_DEBUG "NumMPEReceived = %d", p->NumMPEReceived);
+ }
+
+ pReceptionData->IsDemodLocked = p->IsDemodLocked;
+
+ pReceptionData->SNR = p->SNR;
+ pReceptionData->BER = p->BER;
+ pReceptionData->BERErrorCount = p->BERErrorCount;
+ pReceptionData->InBandPwr = p->InBandPwr;
+ pReceptionData->ErrorTSPackets = p->ErrorTSPackets;
+};
+
+
+static void smsdvb_update_isdbt_stats(struct RECEPTION_STATISTICS_S *pReceptionData,
+ struct SMSHOSTLIB_STATISTICS_ISDBT_ST *p)
+{
+ int i;
+
+ if (sms_dbg & 2) {
+ printk(KERN_DEBUG "IsRfLocked = %d", p->IsRfLocked);
+ printk(KERN_DEBUG "IsDemodLocked = %d", p->IsDemodLocked);
+ printk(KERN_DEBUG "IsExternalLNAOn = %d", p->IsExternalLNAOn);
+ printk(KERN_DEBUG "SNR = %d", p->SNR);
+ printk(KERN_DEBUG "RSSI = %d", p->RSSI);
+ printk(KERN_DEBUG "InBandPwr = %d", p->InBandPwr);
+ printk(KERN_DEBUG "CarrierOffset = %d", p->CarrierOffset);
+ printk(KERN_DEBUG "Frequency = %d", p->Frequency);
+ printk(KERN_DEBUG "Bandwidth = %d", p->Bandwidth);
+ printk(KERN_DEBUG "TransmissionMode = %d", p->TransmissionMode);
+ printk(KERN_DEBUG "ModemState = %d", p->ModemState);
+ printk(KERN_DEBUG "GuardInterval = %d", p->GuardInterval);
+ printk(KERN_DEBUG "SystemType = %d", p->SystemType);
+ printk(KERN_DEBUG "PartialReception = %d", p->PartialReception);
+ printk(KERN_DEBUG "NumOfLayers = %d", p->NumOfLayers);
+ printk(KERN_DEBUG "SmsToHostTxErrors = %d", p->SmsToHostTxErrors);
+
+ for (i = 0; i < 3; i++) {
+ printk(KERN_DEBUG "%d: CodeRate = %d", i, p->LayerInfo[i].CodeRate);
+ printk(KERN_DEBUG "%d: Constellation = %d", i, p->LayerInfo[i].Constellation);
+ printk(KERN_DEBUG "%d: BER = %d", i, p->LayerInfo[i].BER);
+ printk(KERN_DEBUG "%d: BERErrorCount = %d", i, p->LayerInfo[i].BERErrorCount);
+ printk(KERN_DEBUG "%d: BERBitCount = %d", i, p->LayerInfo[i].BERBitCount);
+ printk(KERN_DEBUG "%d: PreBER = %d", i, p->LayerInfo[i].PreBER);
+ printk(KERN_DEBUG "%d: TS_PER = %d", i, p->LayerInfo[i].TS_PER);
+ printk(KERN_DEBUG "%d: ErrorTSPackets = %d", i, p->LayerInfo[i].ErrorTSPackets);
+ printk(KERN_DEBUG "%d: TotalTSPackets = %d", i, p->LayerInfo[i].TotalTSPackets);
+ printk(KERN_DEBUG "%d: TILdepthI = %d", i, p->LayerInfo[i].TILdepthI);
+ printk(KERN_DEBUG "%d: NumberOfSegments = %d", i, p->LayerInfo[i].NumberOfSegments);
+ printk(KERN_DEBUG "%d: TMCCErrors = %d", i, p->LayerInfo[i].TMCCErrors);
+ }
+ }
+
+ pReceptionData->IsDemodLocked = p->IsDemodLocked;
+
+ pReceptionData->SNR = p->SNR;
+ pReceptionData->InBandPwr = p->InBandPwr;
+
+ pReceptionData->ErrorTSPackets = 0;
+ pReceptionData->BER = 0;
+ pReceptionData->BERErrorCount = 0;
+ for (i = 0; i < 3; i++) {
+ pReceptionData->BER += p->LayerInfo[i].BER;
+ pReceptionData->BERErrorCount += p->LayerInfo[i].BERErrorCount;
+ pReceptionData->ErrorTSPackets += p->LayerInfo[i].ErrorTSPackets;
+ }
+}
+
static int smsdvb_onresponse(void *context, struct smscore_buffer_t *cb)
{
struct smsdvb_client_t *client = (struct smsdvb_client_t *) context;
@@ -134,6 +246,7 @@
break;
case MSG_SMS_RF_TUNE_RES:
+ case MSG_SMS_ISDBT_TUNE_RES:
complete(&client->tune_done);
break;
@@ -217,6 +330,40 @@
is_status_update = true;
break;
}
+ case MSG_SMS_GET_STATISTICS_RES: {
+ union {
+ struct SMSHOSTLIB_STATISTICS_ISDBT_ST isdbt;
+ struct SmsMsgStatisticsInfo_ST dvb;
+ } *p = (void *) (phdr + 1);
+ struct RECEPTION_STATISTICS_S *pReceptionData =
+ &client->sms_stat_dvb.ReceptionData;
+
+ sms_info("MSG_SMS_GET_STATISTICS_RES");
+
+ is_status_update = true;
+
+ switch (smscore_get_device_mode(client->coredev)) {
+ case DEVICE_MODE_ISDBT:
+ case DEVICE_MODE_ISDBT_BDA:
+ smsdvb_update_isdbt_stats(pReceptionData, &p->isdbt);
+ break;
+ default:
+ smsdvb_update_dvb_stats(pReceptionData, &p->dvb.Stat);
+ }
+ if (!pReceptionData->IsDemodLocked) {
+ pReceptionData->SNR = 0;
+ pReceptionData->BER = 0;
+ pReceptionData->BERErrorCount = 0;
+ pReceptionData->InBandPwr = 0;
+ pReceptionData->ErrorTSPackets = 0;
+ }
+
+ complete(&client->tune_done);
+ break;
+ }
+ default:
+ sms_info("Unhandled message %d", phdr->msgType);
+
}
smscore_putbuffer(client->coredev, cb);
@@ -233,10 +380,10 @@
DVB3_EVENT_UNC_ERR);
} else {
- /*client->fe_status =
- (phdr->msgType == MSG_SMS_NO_SIGNAL_IND) ?
- 0 : FE_HAS_SIGNAL;*/
- client->fe_status = 0;
+ if (client->sms_stat_dvb.ReceptionData.IsRfLocked)
+ client->fe_status = FE_HAS_SIGNAL | FE_HAS_CARRIER;
+ else
+ client->fe_status = 0;
sms_board_dvb3_event(client, DVB3_EVENT_FE_UNLOCK);
}
}
@@ -325,6 +472,20 @@
0 : -ETIME;
}
+static int smsdvb_send_statistics_request(struct smsdvb_client_t *client)
+{
+ int rc;
+ struct SmsMsgHdr_ST Msg = { MSG_SMS_GET_STATISTICS_REQ,
+ DVBT_BDA_CONTROL_MSG_ID,
+ HIF_TASK,
+ sizeof(struct SmsMsgHdr_ST), 0 };
+
+ rc = smsdvb_sendrequest_and_wait(client, &Msg, sizeof(Msg),
+ &client->tune_done);
+
+ return rc;
+}
+
static inline int led_feedback(struct smsdvb_client_t *client)
{
if (client->fe_status & FE_HAS_LOCK)
@@ -337,33 +498,43 @@
static int smsdvb_read_status(struct dvb_frontend *fe, fe_status_t *stat)
{
+ int rc;
struct smsdvb_client_t *client;
client = container_of(fe, struct smsdvb_client_t, frontend);
+ rc = smsdvb_send_statistics_request(client);
+
*stat = client->fe_status;
led_feedback(client);
- return 0;
+ return rc;
}
static int smsdvb_read_ber(struct dvb_frontend *fe, u32 *ber)
{
+ int rc;
struct smsdvb_client_t *client;
client = container_of(fe, struct smsdvb_client_t, frontend);
+ rc = smsdvb_send_statistics_request(client);
+
*ber = client->sms_stat_dvb.ReceptionData.BER;
led_feedback(client);
- return 0;
+ return rc;
}
static int smsdvb_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
{
+ int rc;
+
struct smsdvb_client_t *client;
client = container_of(fe, struct smsdvb_client_t, frontend);
+ rc = smsdvb_send_statistics_request(client);
+
if (client->sms_stat_dvb.ReceptionData.InBandPwr < -95)
*strength = 0;
else if (client->sms_stat_dvb.ReceptionData.InBandPwr > -29)
@@ -375,31 +546,37 @@
led_feedback(client);
- return 0;
+ return rc;
}
static int smsdvb_read_snr(struct dvb_frontend *fe, u16 *snr)
{
+ int rc;
struct smsdvb_client_t *client;
client = container_of(fe, struct smsdvb_client_t, frontend);
+ rc = smsdvb_send_statistics_request(client);
+
*snr = client->sms_stat_dvb.ReceptionData.SNR;
led_feedback(client);
- return 0;
+ return rc;
}
static int smsdvb_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
{
+ int rc;
struct smsdvb_client_t *client;
client = container_of(fe, struct smsdvb_client_t, frontend);
+ rc = smsdvb_send_statistics_request(client);
+
*ucblocks = client->sms_stat_dvb.ReceptionData.ErrorTSPackets;
led_feedback(client);
- return 0;
+ return rc;
}
static int smsdvb_get_tune_settings(struct dvb_frontend *fe,
@@ -413,9 +590,10 @@
return 0;
}
-static int smsdvb_set_frontend(struct dvb_frontend *fe,
- struct dvb_frontend_parameters *fep)
+static int smsdvb_dvbt_set_frontend(struct dvb_frontend *fe,
+ struct dvb_frontend_parameters *p)
{
+ struct dtv_frontend_properties *c = &fe->dtv_property_cache;
struct smsdvb_client_t *client =
container_of(fe, struct smsdvb_client_t, frontend);
@@ -429,24 +607,33 @@
client->fe_status = FE_HAS_SIGNAL;
client->event_fe_state = -1;
client->event_unc_state = -1;
+ fe->dtv_property_cache.delivery_system = SYS_DVBT;
Msg.Msg.msgSrcId = DVBT_BDA_CONTROL_MSG_ID;
Msg.Msg.msgDstId = HIF_TASK;
Msg.Msg.msgFlags = 0;
Msg.Msg.msgType = MSG_SMS_RF_TUNE_REQ;
Msg.Msg.msgLength = sizeof(Msg);
- Msg.Data[0] = fep->frequency;
+ Msg.Data[0] = c->frequency;
Msg.Data[2] = 12000000;
- sms_debug("freq %d band %d",
- fep->frequency, fep->u.ofdm.bandwidth);
+ sms_info("%s: freq %d band %d", __func__, c->frequency,
+ c->bandwidth_hz);
- switch (fep->u.ofdm.bandwidth) {
- case BANDWIDTH_8_MHZ: Msg.Data[1] = BW_8_MHZ; break;
- case BANDWIDTH_7_MHZ: Msg.Data[1] = BW_7_MHZ; break;
- case BANDWIDTH_6_MHZ: Msg.Data[1] = BW_6_MHZ; break;
- case BANDWIDTH_AUTO: return -EOPNOTSUPP;
- default: return -EINVAL;
+ switch (c->bandwidth_hz / 1000000) {
+ case 8:
+ Msg.Data[1] = BW_8_MHZ;
+ break;
+ case 7:
+ Msg.Data[1] = BW_7_MHZ;
+ break;
+ case 6:
+ Msg.Data[1] = BW_6_MHZ;
+ break;
+ case 0:
+ return -EOPNOTSUPP;
+ default:
+ return -EINVAL;
}
/* Disable LNA, if any. An error is returned if no LNA is present */
ret = sms_board_lna_control(client->coredev, 0);
@@ -470,6 +657,90 @@
&client->tune_done);
}
+static int smsdvb_isdbt_set_frontend(struct dvb_frontend *fe,
+ struct dvb_frontend_parameters *p)
+{
+ struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+ struct smsdvb_client_t *client =
+ container_of(fe, struct smsdvb_client_t, frontend);
+
+ struct {
+ struct SmsMsgHdr_ST Msg;
+ u32 Data[4];
+ } Msg;
+
+ fe->dtv_property_cache.delivery_system = SYS_ISDBT;
+
+ Msg.Msg.msgSrcId = DVBT_BDA_CONTROL_MSG_ID;
+ Msg.Msg.msgDstId = HIF_TASK;
+ Msg.Msg.msgFlags = 0;
+ Msg.Msg.msgType = MSG_SMS_ISDBT_TUNE_REQ;
+ Msg.Msg.msgLength = sizeof(Msg);
+
+ if (c->isdbt_sb_segment_idx == -1)
+ c->isdbt_sb_segment_idx = 0;
+
+ switch (c->isdbt_sb_segment_count) {
+ case 3:
+ Msg.Data[1] = BW_ISDBT_3SEG;
+ break;
+ case 1:
+ Msg.Data[1] = BW_ISDBT_1SEG;
+ break;
+ case 0: /* AUTO */
+ switch (c->bandwidth_hz / 1000000) {
+ case 8:
+ case 7:
+ c->isdbt_sb_segment_count = 3;
+ Msg.Data[1] = BW_ISDBT_3SEG;
+ break;
+ case 6:
+ c->isdbt_sb_segment_count = 1;
+ Msg.Data[1] = BW_ISDBT_1SEG;
+ break;
+ default: /* Assumes 6 MHZ bw */
+ c->isdbt_sb_segment_count = 1;
+ c->bandwidth_hz = 6000;
+ Msg.Data[1] = BW_ISDBT_1SEG;
+ break;
+ }
+ break;
+ default:
+ sms_info("Segment count %d not supported", c->isdbt_sb_segment_count);
+ return -EINVAL;
+ }
+
+ Msg.Data[0] = c->frequency;
+ Msg.Data[2] = 12000000;
+ Msg.Data[3] = c->isdbt_sb_segment_idx;
+
+ sms_info("%s: freq %d segwidth %d segindex %d\n", __func__,
+ c->frequency, c->isdbt_sb_segment_count,
+ c->isdbt_sb_segment_idx);
+
+ return smsdvb_sendrequest_and_wait(client, &Msg, sizeof(Msg),
+ &client->tune_done);
+}
+
+static int smsdvb_set_frontend(struct dvb_frontend *fe,
+ struct dvb_frontend_parameters *fep)
+{
+ struct smsdvb_client_t *client =
+ container_of(fe, struct smsdvb_client_t, frontend);
+ struct smscore_device_t *coredev = client->coredev;
+
+ switch (smscore_get_device_mode(coredev)) {
+ case DEVICE_MODE_DVBT:
+ case DEVICE_MODE_DVBT_BDA:
+ return smsdvb_dvbt_set_frontend(fe, fep);
+ case DEVICE_MODE_ISDBT:
+ case DEVICE_MODE_ISDBT_BDA:
+ return smsdvb_isdbt_set_frontend(fe, fep);
+ default:
+ return -EINVAL;
+ }
+}
+
static int smsdvb_get_frontend(struct dvb_frontend *fe,
struct dvb_frontend_parameters *fep)
{
@@ -557,13 +828,6 @@
/* device removal handled by onremove callback */
if (!arrival)
return 0;
-
- if (smscore_get_device_mode(coredev) != DEVICE_MODE_DVBT_BDA) {
- sms_err("SMS Device mode is not set for "
- "DVB operation.");
- return 0;
- }
-
client = kzalloc(sizeof(struct smsdvb_client_t), GFP_KERNEL);
if (!client) {
sms_err("kmalloc() failed");
diff --git a/drivers/media/dvb/siano/smsir.c b/drivers/media/dvb/siano/smsir.c
index e3d776f..a56eac7 100644
--- a/drivers/media/dvb/siano/smsir.c
+++ b/drivers/media/dvb/siano/smsir.c
@@ -85,9 +85,9 @@
{ } /* Terminating entry */
};
-u32 ir_pos;
-u32 ir_word;
-u32 ir_toggle;
+static u32 ir_pos;
+static u32 ir_word;
+static u32 ir_toggle;
#define RC5_PUSH_BIT(dst, bit, pos) \
{ dst <<= 1; dst |= bit; pos++; }
diff --git a/drivers/media/dvb/ttpci/av7110_ir.c b/drivers/media/dvb/ttpci/av7110_ir.c
index 23a1c63..b070e88 100644
--- a/drivers/media/dvb/ttpci/av7110_ir.c
+++ b/drivers/media/dvb/ttpci/av7110_ir.c
@@ -268,8 +268,8 @@
/* /proc/av7110_ir interface */
-static int av7110_ir_write_proc(struct file *file, const char __user *buffer,
- unsigned long count, void *data)
+static ssize_t av7110_ir_proc_write(struct file *file, const char __user *buffer,
+ size_t count, loff_t *pos)
{
char *page;
u32 ir_config;
@@ -309,6 +309,10 @@
return count;
}
+static const struct file_operations av7110_ir_proc_fops = {
+ .owner = THIS_MODULE,
+ .write = av7110_ir_proc_write,
+};
/* interrupt handler */
static void ir_handler(struct av7110 *av7110, u32 ircom)
@@ -368,11 +372,9 @@
input_dev->timer.data = (unsigned long) &av7110->ir;
if (av_cnt == 1) {
- e = create_proc_entry("av7110_ir", S_IFREG | S_IRUGO | S_IWUSR, NULL);
- if (e) {
- e->write_proc = av7110_ir_write_proc;
+ e = proc_create("av7110_ir", S_IWUSR, NULL, &av7110_ir_proc_fops);
+ if (e)
e->size = 4 + 256 * sizeof(u16);
- }
}
tasklet_init(&av7110->ir.ir_tasklet, av7110_emit_key, (unsigned long) &av7110->ir);
diff --git a/drivers/media/dvb/ttpci/budget-ci.c b/drivers/media/dvb/ttpci/budget-ci.c
index 9782e05..49c2a81 100644
--- a/drivers/media/dvb/ttpci/budget-ci.c
+++ b/drivers/media/dvb/ttpci/budget-ci.c
@@ -254,7 +254,7 @@
budget_ci->ir.timer_keyup.function = msp430_ir_keyup;
budget_ci->ir.timer_keyup.data = (unsigned long) &budget_ci->ir;
budget_ci->ir.last_raw = 0xffff; /* An impossible value */
- error = ir_input_register(input_dev, ir_codes);
+ error = ir_input_register(input_dev, ir_codes, NULL);
if (error) {
printk(KERN_ERR "budget_ci: could not init driver for IR device (code %d)\n", error);
return error;
diff --git a/drivers/media/dvb/ttpci/budget.c b/drivers/media/dvb/ttpci/budget.c
index e48380c..9fdf26c 100644
--- a/drivers/media/dvb/ttpci/budget.c
+++ b/drivers/media/dvb/ttpci/budget.c
@@ -433,9 +433,8 @@
.demod_mode = STV090x_SINGLE,
.clk_mode = STV090x_CLK_EXT,
- .xtal = 27000000,
+ .xtal = 13500000,
.address = 0x68,
- .ref_clk = 27000000,
.ts1_mode = STV090x_TSMODE_DVBCI,
.ts2_mode = STV090x_TSMODE_SERIAL_CONTINUOUS,
@@ -457,6 +456,7 @@
static struct stv6110x_config tt1600_stv6110x_config = {
.addr = 0x60,
.refclk = 27000000,
+ .clk_div = 2,
};
static struct isl6423_config tt1600_isl6423_config = {
diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig
index 3f40f37..83567b8 100644
--- a/drivers/media/radio/Kconfig
+++ b/drivers/media/radio/Kconfig
@@ -417,6 +417,18 @@
Say Y here if TEA5764 have a 32768 Hz crystal in circuit, say N
here if TEA5764 reference frequency is connected in FREQIN.
+config RADIO_SAA7706H
+ tristate "SAA7706H Car Radio DSP"
+ depends on I2C && VIDEO_V4L2
+ ---help---
+ Say Y here if you want to use the SAA7706H Car radio Digital
+ Signal Processor, found for instance on the Russellville development
+ board. On the russellville the device is connected to internal
+ timberdale I2C bus.
+
+ To compile this driver as a module, choose M here: the
+ module will be called SAA7706H.
+
config RADIO_TEF6862
tristate "TEF6862 Car Radio Enhanced Selectivity Tuner"
depends on I2C && VIDEO_V4L2
@@ -429,4 +441,15 @@
To compile this driver as a module, choose M here: the
module will be called TEF6862.
+config RADIO_TIMBERDALE
+ tristate "Enable the Timberdale radio driver"
+ depends on MFD_TIMBERDALE && VIDEO_V4L2
+ depends on I2C # for RADIO_SAA7706H
+ select RADIO_TEF6862
+ select RADIO_SAA7706H
+ ---help---
+ This is a kind of umbrella driver for the Radio Tuner and DSP
+ found behind the Timberdale FPGA on the Russellville board.
+ Enabling this driver will automatically select the DSP and tuner.
+
endif # RADIO_ADAPTERS
diff --git a/drivers/media/radio/Makefile b/drivers/media/radio/Makefile
index 01922ad..f615583 100644
--- a/drivers/media/radio/Makefile
+++ b/drivers/media/radio/Makefile
@@ -23,6 +23,8 @@
obj-$(CONFIG_RADIO_SI470X) += si470x/
obj-$(CONFIG_USB_MR800) += radio-mr800.o
obj-$(CONFIG_RADIO_TEA5764) += radio-tea5764.o
+obj-$(CONFIG_RADIO_SAA7706H) += saa7706h.o
obj-$(CONFIG_RADIO_TEF6862) += tef6862.o
+obj-$(CONFIG_RADIO_TIMBERDALE) += radio-timb.o
EXTRA_CFLAGS += -Isound
diff --git a/drivers/media/radio/radio-timb.c b/drivers/media/radio/radio-timb.c
new file mode 100644
index 0000000..0de457f
--- /dev/null
+++ b/drivers/media/radio/radio-timb.c
@@ -0,0 +1,244 @@
+/*
+ * radio-timb.c Timberdale FPGA Radio driver
+ * Copyright (c) 2009 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/version.h>
+#include <linux/io.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-device.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <media/timb_radio.h>
+
+#define DRIVER_NAME "timb-radio"
+
+struct timbradio {
+ struct timb_radio_platform_data pdata;
+ struct v4l2_subdev *sd_tuner;
+ struct v4l2_subdev *sd_dsp;
+ struct video_device video_dev;
+ struct v4l2_device v4l2_dev;
+};
+
+
+static int timbradio_vidioc_querycap(struct file *file, void *priv,
+ struct v4l2_capability *v)
+{
+ strlcpy(v->driver, DRIVER_NAME, sizeof(v->driver));
+ strlcpy(v->card, "Timberdale Radio", sizeof(v->card));
+ snprintf(v->bus_info, sizeof(v->bus_info), "platform:"DRIVER_NAME);
+ v->version = KERNEL_VERSION(0, 0, 1);
+ v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO;
+ return 0;
+}
+
+static int timbradio_vidioc_g_tuner(struct file *file, void *priv,
+ struct v4l2_tuner *v)
+{
+ struct timbradio *tr = video_drvdata(file);
+ return v4l2_subdev_call(tr->sd_tuner, tuner, g_tuner, v);
+}
+
+static int timbradio_vidioc_s_tuner(struct file *file, void *priv,
+ struct v4l2_tuner *v)
+{
+ struct timbradio *tr = video_drvdata(file);
+ return v4l2_subdev_call(tr->sd_tuner, tuner, s_tuner, v);
+}
+
+static int timbradio_vidioc_g_input(struct file *filp, void *priv,
+ unsigned int *i)
+{
+ *i = 0;
+ return 0;
+}
+
+static int timbradio_vidioc_s_input(struct file *filp, void *priv,
+ unsigned int i)
+{
+ return i ? -EINVAL : 0;
+}
+
+static int timbradio_vidioc_g_audio(struct file *file, void *priv,
+ struct v4l2_audio *a)
+{
+ a->index = 0;
+ strlcpy(a->name, "Radio", sizeof(a->name));
+ a->capability = V4L2_AUDCAP_STEREO;
+ return 0;
+}
+
+static int timbradio_vidioc_s_audio(struct file *file, void *priv,
+ struct v4l2_audio *a)
+{
+ return a->index ? -EINVAL : 0;
+}
+
+static int timbradio_vidioc_s_frequency(struct file *file, void *priv,
+ struct v4l2_frequency *f)
+{
+ struct timbradio *tr = video_drvdata(file);
+ return v4l2_subdev_call(tr->sd_tuner, tuner, s_frequency, f);
+}
+
+static int timbradio_vidioc_g_frequency(struct file *file, void *priv,
+ struct v4l2_frequency *f)
+{
+ struct timbradio *tr = video_drvdata(file);
+ return v4l2_subdev_call(tr->sd_tuner, tuner, g_frequency, f);
+}
+
+static int timbradio_vidioc_queryctrl(struct file *file, void *priv,
+ struct v4l2_queryctrl *qc)
+{
+ struct timbradio *tr = video_drvdata(file);
+ return v4l2_subdev_call(tr->sd_dsp, core, queryctrl, qc);
+}
+
+static int timbradio_vidioc_g_ctrl(struct file *file, void *priv,
+ struct v4l2_control *ctrl)
+{
+ struct timbradio *tr = video_drvdata(file);
+ return v4l2_subdev_call(tr->sd_dsp, core, g_ctrl, ctrl);
+}
+
+static int timbradio_vidioc_s_ctrl(struct file *file, void *priv,
+ struct v4l2_control *ctrl)
+{
+ struct timbradio *tr = video_drvdata(file);
+ return v4l2_subdev_call(tr->sd_dsp, core, s_ctrl, ctrl);
+}
+
+static const struct v4l2_ioctl_ops timbradio_ioctl_ops = {
+ .vidioc_querycap = timbradio_vidioc_querycap,
+ .vidioc_g_tuner = timbradio_vidioc_g_tuner,
+ .vidioc_s_tuner = timbradio_vidioc_s_tuner,
+ .vidioc_g_frequency = timbradio_vidioc_g_frequency,
+ .vidioc_s_frequency = timbradio_vidioc_s_frequency,
+ .vidioc_g_input = timbradio_vidioc_g_input,
+ .vidioc_s_input = timbradio_vidioc_s_input,
+ .vidioc_g_audio = timbradio_vidioc_g_audio,
+ .vidioc_s_audio = timbradio_vidioc_s_audio,
+ .vidioc_queryctrl = timbradio_vidioc_queryctrl,
+ .vidioc_g_ctrl = timbradio_vidioc_g_ctrl,
+ .vidioc_s_ctrl = timbradio_vidioc_s_ctrl
+};
+
+static const struct v4l2_file_operations timbradio_fops = {
+ .owner = THIS_MODULE,
+ .ioctl = video_ioctl2,
+};
+
+static int __devinit timbradio_probe(struct platform_device *pdev)
+{
+ struct timb_radio_platform_data *pdata = pdev->dev.platform_data;
+ struct timbradio *tr;
+ int err;
+
+ if (!pdata) {
+ dev_err(&pdev->dev, "Platform data missing\n");
+ err = -EINVAL;
+ goto err;
+ }
+
+ tr = kzalloc(sizeof(*tr), GFP_KERNEL);
+ if (!tr) {
+ err = -ENOMEM;
+ goto err;
+ }
+
+ tr->pdata = *pdata;
+
+ strlcpy(tr->video_dev.name, "Timberdale Radio",
+ sizeof(tr->video_dev.name));
+ tr->video_dev.fops = &timbradio_fops;
+ tr->video_dev.ioctl_ops = &timbradio_ioctl_ops;
+ tr->video_dev.release = video_device_release_empty;
+ tr->video_dev.minor = -1;
+
+ strlcpy(tr->v4l2_dev.name, DRIVER_NAME, sizeof(tr->v4l2_dev.name));
+ err = v4l2_device_register(NULL, &tr->v4l2_dev);
+ if (err)
+ goto err_v4l2_dev;
+
+ tr->video_dev.v4l2_dev = &tr->v4l2_dev;
+
+ err = video_register_device(&tr->video_dev, VFL_TYPE_RADIO, -1);
+ if (err) {
+ dev_err(&pdev->dev, "Error reg video\n");
+ goto err_video_req;
+ }
+
+ video_set_drvdata(&tr->video_dev, tr);
+
+ platform_set_drvdata(pdev, tr);
+ return 0;
+
+err_video_req:
+ video_device_release_empty(&tr->video_dev);
+ v4l2_device_unregister(&tr->v4l2_dev);
+err_v4l2_dev:
+ kfree(tr);
+err:
+ dev_err(&pdev->dev, "Failed to register: %d\n", err);
+
+ return err;
+}
+
+static int __devexit timbradio_remove(struct platform_device *pdev)
+{
+ struct timbradio *tr = platform_get_drvdata(pdev);
+
+ video_unregister_device(&tr->video_dev);
+ video_device_release_empty(&tr->video_dev);
+
+ v4l2_device_unregister(&tr->v4l2_dev);
+
+ kfree(tr);
+
+ return 0;
+}
+
+static struct platform_driver timbradio_platform_driver = {
+ .driver = {
+ .name = DRIVER_NAME,
+ .owner = THIS_MODULE,
+ },
+ .probe = timbradio_probe,
+ .remove = timbradio_remove,
+};
+
+/*--------------------------------------------------------------------------*/
+
+static int __init timbradio_init(void)
+{
+ return platform_driver_register(&timbradio_platform_driver);
+}
+
+static void __exit timbradio_exit(void)
+{
+ platform_driver_unregister(&timbradio_platform_driver);
+}
+
+module_init(timbradio_init);
+module_exit(timbradio_exit);
+
+MODULE_DESCRIPTION("Timberdale Radio driver");
+MODULE_AUTHOR("Mocean Laboratories <info@mocean-labs.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:"DRIVER_NAME);
diff --git a/drivers/media/radio/saa7706h.c b/drivers/media/radio/saa7706h.c
new file mode 100644
index 0000000..5db5528
--- /dev/null
+++ b/drivers/media/radio/saa7706h.c
@@ -0,0 +1,451 @@
+/*
+ * saa7706.c Philips SAA7706H Car Radio DSP driver
+ * Copyright (c) 2009 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-chip-ident.h>
+
+#define DRIVER_NAME "saa7706h"
+
+/* the I2C memory map looks like this
+
+ $1C00 - $FFFF Not Used
+ $2200 - $3FFF Reserved YRAM (DSP2) space
+ $2000 - $21FF YRAM (DSP2)
+ $1FF0 - $1FFF Hardware Registers
+ $1280 - $1FEF Reserved XRAM (DSP2) space
+ $1000 - $127F XRAM (DSP2)
+ $0FFF DSP CONTROL
+ $0A00 - $0FFE Reserved
+ $0980 - $09FF Reserved YRAM (DSP1) space
+ $0800 - $097F YRAM (DSP1)
+ $0200 - $07FF Not Used
+ $0180 - $01FF Reserved XRAM (DSP1) space
+ $0000 - $017F XRAM (DSP1)
+*/
+
+#define SAA7706H_REG_CTRL 0x0fff
+#define SAA7706H_CTRL_BYP_PLL 0x0001
+#define SAA7706H_CTRL_PLL_DIV_MASK 0x003e
+#define SAA7706H_CTRL_PLL3_62975MHZ 0x003e
+#define SAA7706H_CTRL_DSP_TURBO 0x0040
+#define SAA7706H_CTRL_PC_RESET_DSP1 0x0080
+#define SAA7706H_CTRL_PC_RESET_DSP2 0x0100
+#define SAA7706H_CTRL_DSP1_ROM_EN_MASK 0x0600
+#define SAA7706H_CTRL_DSP1_FUNC_PROM 0x0000
+#define SAA7706H_CTRL_DSP2_ROM_EN_MASK 0x1800
+#define SAA7706H_CTRL_DSP2_FUNC_PROM 0x0000
+#define SAA7706H_CTRL_DIG_SIL_INTERPOL 0x8000
+
+#define SAA7706H_REG_EVALUATION 0x1ff0
+#define SAA7706H_EVAL_DISABLE_CHARGE_PUMP 0x000001
+#define SAA7706H_EVAL_DCS_CLOCK 0x000002
+#define SAA7706H_EVAL_GNDRC1_ENABLE 0x000004
+#define SAA7706H_EVAL_GNDRC2_ENABLE 0x000008
+
+#define SAA7706H_REG_CL_GEN1 0x1ff3
+#define SAA7706H_CL_GEN1_MIN_LOOPGAIN_MASK 0x00000f
+#define SAA7706H_CL_GEN1_LOOPGAIN_MASK 0x0000f0
+#define SAA7706H_CL_GEN1_COARSE_RATION 0xffff00
+
+#define SAA7706H_REG_CL_GEN2 0x1ff4
+#define SAA7706H_CL_GEN2_WSEDGE_FALLING 0x000001
+#define SAA7706H_CL_GEN2_STOP_VCO 0x000002
+#define SAA7706H_CL_GEN2_FRERUN 0x000004
+#define SAA7706H_CL_GEN2_ADAPTIVE 0x000008
+#define SAA7706H_CL_GEN2_FINE_RATIO_MASK 0x0ffff0
+
+#define SAA7706H_REG_CL_GEN4 0x1ff6
+#define SAA7706H_CL_GEN4_BYPASS_PLL1 0x001000
+#define SAA7706H_CL_GEN4_PLL1_DIV_MASK 0x03e000
+#define SAA7706H_CL_GEN4_DSP1_TURBO 0x040000
+
+#define SAA7706H_REG_SEL 0x1ff7
+#define SAA7706H_SEL_DSP2_SRCA_MASK 0x000007
+#define SAA7706H_SEL_DSP2_FMTA_MASK 0x000031
+#define SAA7706H_SEL_DSP2_SRCB_MASK 0x0001c0
+#define SAA7706H_SEL_DSP2_FMTB_MASK 0x000e00
+#define SAA7706H_SEL_DSP1_SRC_MASK 0x003000
+#define SAA7706H_SEL_DSP1_FMT_MASK 0x01c003
+#define SAA7706H_SEL_SPDIF2 0x020000
+#define SAA7706H_SEL_HOST_IO_FMT_MASK 0x1c0000
+#define SAA7706H_SEL_EN_HOST_IO 0x200000
+
+#define SAA7706H_REG_IAC 0x1ff8
+#define SAA7706H_REG_CLK_SET 0x1ff9
+#define SAA7706H_REG_CLK_COEFF 0x1ffa
+#define SAA7706H_REG_INPUT_SENS 0x1ffb
+#define SAA7706H_INPUT_SENS_RDS_VOL_MASK 0x0003f
+#define SAA7706H_INPUT_SENS_FM_VOL_MASK 0x00fc0
+#define SAA7706H_INPUT_SENS_FM_MPX 0x01000
+#define SAA7706H_INPUT_SENS_OFF_FILTER_A_EN 0x02000
+#define SAA7706H_INPUT_SENS_OFF_FILTER_B_EN 0x04000
+#define SAA7706H_REG_PHONE_NAV_AUDIO 0x1ffc
+#define SAA7706H_REG_IO_CONF_DSP2 0x1ffd
+#define SAA7706H_REG_STATUS_DSP2 0x1ffe
+#define SAA7706H_REG_PC_DSP2 0x1fff
+
+#define SAA7706H_DSP1_MOD0 0x0800
+#define SAA7706H_DSP1_ROM_VER 0x097f
+#define SAA7706H_DSP2_MPTR0 0x1000
+
+#define SAA7706H_DSP1_MODPNTR 0x0000
+
+#define SAA7706H_DSP2_XMEM_CONTLLCW 0x113e
+#define SAA7706H_DSP2_XMEM_BUSAMP 0x114a
+#define SAA7706H_DSP2_XMEM_FDACPNTR 0x11f9
+#define SAA7706H_DSP2_XMEM_IIS1PNTR 0x11fb
+
+#define SAA7706H_DSP2_YMEM_PVGA 0x212a
+#define SAA7706H_DSP2_YMEM_PVAT1 0x212b
+#define SAA7706H_DSP2_YMEM_PVAT 0x212c
+#define SAA7706H_DSP2_YMEM_ROM_VER 0x21ff
+
+#define SUPPORTED_DSP1_ROM_VER 0x667
+
+struct saa7706h_state {
+ struct v4l2_subdev sd;
+ unsigned muted;
+};
+
+static inline struct saa7706h_state *to_state(struct v4l2_subdev *sd)
+{
+ return container_of(sd, struct saa7706h_state, sd);
+}
+
+static int saa7706h_i2c_send(struct i2c_client *client, const u8 *data, int len)
+{
+ int err = i2c_master_send(client, data, len);
+ if (err == len)
+ return 0;
+ return err > 0 ? -EIO : err;
+}
+
+static int saa7706h_i2c_transfer(struct i2c_client *client,
+ struct i2c_msg *msgs, int num)
+{
+ int err = i2c_transfer(client->adapter, msgs, num);
+ if (err == num)
+ return 0;
+ return err > 0 ? -EIO : err;
+}
+
+static int saa7706h_set_reg24(struct v4l2_subdev *sd, u16 reg, u32 val)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ u8 buf[5];
+ int pos = 0;
+
+ buf[pos++] = reg >> 8;
+ buf[pos++] = reg;
+ buf[pos++] = val >> 16;
+ buf[pos++] = val >> 8;
+ buf[pos++] = val;
+
+ return saa7706h_i2c_send(client, buf, pos);
+}
+
+static int saa7706h_set_reg24_err(struct v4l2_subdev *sd, u16 reg, u32 val,
+ int *err)
+{
+ return *err ? *err : saa7706h_set_reg24(sd, reg, val);
+}
+
+static int saa7706h_set_reg16(struct v4l2_subdev *sd, u16 reg, u16 val)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ u8 buf[4];
+ int pos = 0;
+
+ buf[pos++] = reg >> 8;
+ buf[pos++] = reg;
+ buf[pos++] = val >> 8;
+ buf[pos++] = val;
+
+ return saa7706h_i2c_send(client, buf, pos);
+}
+
+static int saa7706h_set_reg16_err(struct v4l2_subdev *sd, u16 reg, u16 val,
+ int *err)
+{
+ return *err ? *err : saa7706h_set_reg16(sd, reg, val);
+}
+
+static int saa7706h_get_reg16(struct v4l2_subdev *sd, u16 reg)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ u8 buf[2];
+ int err;
+ u8 regaddr[] = {reg >> 8, reg};
+ struct i2c_msg msg[] = { {client->addr, 0, sizeof(regaddr), regaddr},
+ {client->addr, I2C_M_RD, sizeof(buf), buf} };
+
+ err = saa7706h_i2c_transfer(client, msg, ARRAY_SIZE(msg));
+ if (err)
+ return err;
+
+ return buf[0] << 8 | buf[1];
+}
+
+static int saa7706h_unmute(struct v4l2_subdev *sd)
+{
+ struct saa7706h_state *state = to_state(sd);
+ int err = 0;
+
+ err = saa7706h_set_reg16_err(sd, SAA7706H_REG_CTRL,
+ SAA7706H_CTRL_PLL3_62975MHZ | SAA7706H_CTRL_PC_RESET_DSP1 |
+ SAA7706H_CTRL_PC_RESET_DSP2, &err);
+
+ /* newer versions of the chip requires a small sleep after reset */
+ msleep(1);
+
+ err = saa7706h_set_reg16_err(sd, SAA7706H_REG_CTRL,
+ SAA7706H_CTRL_PLL3_62975MHZ, &err);
+
+ err = saa7706h_set_reg24_err(sd, SAA7706H_REG_EVALUATION, 0, &err);
+
+ err = saa7706h_set_reg24_err(sd, SAA7706H_REG_CL_GEN1, 0x040022, &err);
+
+ err = saa7706h_set_reg24_err(sd, SAA7706H_REG_CL_GEN2,
+ SAA7706H_CL_GEN2_WSEDGE_FALLING, &err);
+
+ err = saa7706h_set_reg24_err(sd, SAA7706H_REG_CL_GEN4, 0x024080, &err);
+
+ err = saa7706h_set_reg24_err(sd, SAA7706H_REG_SEL, 0x200080, &err);
+
+ err = saa7706h_set_reg24_err(sd, SAA7706H_REG_IAC, 0xf4caed, &err);
+
+ err = saa7706h_set_reg24_err(sd, SAA7706H_REG_CLK_SET, 0x124334, &err);
+
+ err = saa7706h_set_reg24_err(sd, SAA7706H_REG_CLK_COEFF, 0x004a1a,
+ &err);
+
+ err = saa7706h_set_reg24_err(sd, SAA7706H_REG_INPUT_SENS, 0x0071c7,
+ &err);
+
+ err = saa7706h_set_reg24_err(sd, SAA7706H_REG_PHONE_NAV_AUDIO,
+ 0x0e22ff, &err);
+
+ err = saa7706h_set_reg24_err(sd, SAA7706H_REG_IO_CONF_DSP2, 0x001ff8,
+ &err);
+
+ err = saa7706h_set_reg24_err(sd, SAA7706H_REG_STATUS_DSP2, 0x080003,
+ &err);
+
+ err = saa7706h_set_reg24_err(sd, SAA7706H_REG_PC_DSP2, 0x000004, &err);
+
+ err = saa7706h_set_reg16_err(sd, SAA7706H_DSP1_MOD0, 0x0c6c, &err);
+
+ err = saa7706h_set_reg24_err(sd, SAA7706H_DSP2_MPTR0, 0x000b4b, &err);
+
+ err = saa7706h_set_reg24_err(sd, SAA7706H_DSP1_MODPNTR, 0x000600, &err);
+
+ err = saa7706h_set_reg24_err(sd, SAA7706H_DSP1_MODPNTR, 0x0000c0, &err);
+
+ err = saa7706h_set_reg24_err(sd, SAA7706H_DSP2_XMEM_CONTLLCW, 0x000819,
+ &err);
+
+ err = saa7706h_set_reg24_err(sd, SAA7706H_DSP2_XMEM_CONTLLCW, 0x00085a,
+ &err);
+
+ err = saa7706h_set_reg24_err(sd, SAA7706H_DSP2_XMEM_BUSAMP, 0x7fffff,
+ &err);
+
+ err = saa7706h_set_reg24_err(sd, SAA7706H_DSP2_XMEM_FDACPNTR, 0x2000cb,
+ &err);
+
+ err = saa7706h_set_reg24_err(sd, SAA7706H_DSP2_XMEM_IIS1PNTR, 0x2000cb,
+ &err);
+
+ err = saa7706h_set_reg16_err(sd, SAA7706H_DSP2_YMEM_PVGA, 0x0f80, &err);
+
+ err = saa7706h_set_reg16_err(sd, SAA7706H_DSP2_YMEM_PVAT1, 0x0800,
+ &err);
+
+ err = saa7706h_set_reg16_err(sd, SAA7706H_DSP2_YMEM_PVAT, 0x0800, &err);
+
+ err = saa7706h_set_reg24_err(sd, SAA7706H_DSP2_XMEM_CONTLLCW, 0x000905,
+ &err);
+ if (!err)
+ state->muted = 0;
+ return err;
+}
+
+static int saa7706h_mute(struct v4l2_subdev *sd)
+{
+ struct saa7706h_state *state = to_state(sd);
+ int err;
+
+ err = saa7706h_set_reg16(sd, SAA7706H_REG_CTRL,
+ SAA7706H_CTRL_PLL3_62975MHZ | SAA7706H_CTRL_PC_RESET_DSP1 |
+ SAA7706H_CTRL_PC_RESET_DSP2);
+ if (!err)
+ state->muted = 1;
+ return err;
+}
+
+static int saa7706h_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc)
+{
+ switch (qc->id) {
+ case V4L2_CID_AUDIO_MUTE:
+ return v4l2_ctrl_query_fill(qc, 0, 1, 1, 1);
+ }
+ return -EINVAL;
+}
+
+static int saa7706h_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+{
+ struct saa7706h_state *state = to_state(sd);
+
+ switch (ctrl->id) {
+ case V4L2_CID_AUDIO_MUTE:
+ ctrl->value = state->muted;
+ return 0;
+ }
+ return -EINVAL;
+}
+
+static int saa7706h_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+{
+ switch (ctrl->id) {
+ case V4L2_CID_AUDIO_MUTE:
+ if (ctrl->value)
+ return saa7706h_mute(sd);
+ return saa7706h_unmute(sd);
+ }
+ return -EINVAL;
+}
+
+static int saa7706h_g_chip_ident(struct v4l2_subdev *sd,
+ struct v4l2_dbg_chip_ident *chip)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+ return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_SAA7706H, 0);
+}
+
+static const struct v4l2_subdev_core_ops saa7706h_core_ops = {
+ .g_chip_ident = saa7706h_g_chip_ident,
+ .queryctrl = saa7706h_queryctrl,
+ .g_ctrl = saa7706h_g_ctrl,
+ .s_ctrl = saa7706h_s_ctrl,
+};
+
+static const struct v4l2_subdev_ops saa7706h_ops = {
+ .core = &saa7706h_core_ops,
+};
+
+/*
+ * Generic i2c probe
+ * concerning the addresses: i2c wants 7 bit (without the r/w bit), so '>>1'
+ */
+
+static int __devinit saa7706h_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct saa7706h_state *state;
+ struct v4l2_subdev *sd;
+ int err;
+
+ /* Check if the adapter supports the needed features */
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+ return -EIO;
+
+ v4l_info(client, "chip found @ 0x%02x (%s)\n",
+ client->addr << 1, client->adapter->name);
+
+ state = kmalloc(sizeof(struct saa7706h_state), GFP_KERNEL);
+ if (state == NULL)
+ return -ENOMEM;
+ sd = &state->sd;
+ v4l2_i2c_subdev_init(sd, client, &saa7706h_ops);
+
+ /* check the rom versions */
+ err = saa7706h_get_reg16(sd, SAA7706H_DSP1_ROM_VER);
+ if (err < 0)
+ goto err;
+ if (err != SUPPORTED_DSP1_ROM_VER)
+ v4l2_warn(sd, "Unknown DSP1 ROM code version: 0x%x\n", err);
+
+ state->muted = 1;
+
+ /* startup in a muted state */
+ err = saa7706h_mute(sd);
+ if (err)
+ goto err;
+
+ return 0;
+
+err:
+ v4l2_device_unregister_subdev(sd);
+ kfree(to_state(sd));
+
+ printk(KERN_ERR DRIVER_NAME ": Failed to probe: %d\n", err);
+
+ return err;
+}
+
+static int __devexit saa7706h_remove(struct i2c_client *client)
+{
+ struct v4l2_subdev *sd = i2c_get_clientdata(client);
+
+ saa7706h_mute(sd);
+ v4l2_device_unregister_subdev(sd);
+ kfree(to_state(sd));
+ return 0;
+}
+
+static const struct i2c_device_id saa7706h_id[] = {
+ {DRIVER_NAME, 0},
+ {},
+};
+
+MODULE_DEVICE_TABLE(i2c, saa7706h_id);
+
+static struct i2c_driver saa7706h_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = DRIVER_NAME,
+ },
+ .probe = saa7706h_probe,
+ .remove = saa7706h_remove,
+ .id_table = saa7706h_id,
+};
+
+static __init int saa7706h_init(void)
+{
+ return i2c_add_driver(&saa7706h_driver);
+}
+
+static __exit void saa7706h_exit(void)
+{
+ i2c_del_driver(&saa7706h_driver);
+}
+
+module_init(saa7706h_init);
+module_exit(saa7706h_exit);
+
+MODULE_DESCRIPTION("SAA7706H Car Radio DSP driver");
+MODULE_AUTHOR("Mocean Laboratories");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/media/radio/si470x/radio-si470x-common.c b/drivers/media/radio/si470x/radio-si470x-common.c
index 4da0f15..47075fc 100644
--- a/drivers/media/radio/si470x/radio-si470x-common.c
+++ b/drivers/media/radio/si470x/radio-si470x-common.c
@@ -724,7 +724,7 @@
tuner->audmode = V4L2_TUNER_MODE_MONO;
/* min is worst, max is best; signal:0..0xffff; rssi: 0..0xff */
- /* measured in units of db쨉V in 1 db increments (max at ~75 db쨉V) */
+ /* measured in units of dbµV in 1 db increments (max at ~75 dbµV) */
tuner->signal = (radio->registers[STATUSRSSI] & STATUSRSSI_RSSI);
/* the ideal factor is 0xffff/75 = 873,8 */
tuner->signal = (tuner->signal * 873) + (8 * tuner->signal / 10);
diff --git a/drivers/media/radio/si470x/radio-si470x-usb.c b/drivers/media/radio/si470x/radio-si470x-usb.c
index a96e1b9..6f60841 100644
--- a/drivers/media/radio/si470x/radio-si470x-usb.c
+++ b/drivers/media/radio/si470x/radio-si470x-usb.c
@@ -590,8 +590,9 @@
video_unregister_device(radio->videodev);
kfree(radio->int_in_buffer);
kfree(radio->buffer);
+ mutex_unlock(&radio->disconnect_lock);
kfree(radio);
- goto unlock;
+ goto done;
}
/* cancel read processes */
@@ -601,7 +602,6 @@
retval = si470x_stop(radio);
usb_autopm_put_interface(radio->intf);
}
-unlock:
mutex_unlock(&radio->disconnect_lock);
done:
return retval;
@@ -842,9 +842,11 @@
kfree(radio->int_in_buffer);
video_unregister_device(radio->videodev);
kfree(radio->buffer);
+ mutex_unlock(&radio->disconnect_lock);
kfree(radio);
+ } else {
+ mutex_unlock(&radio->disconnect_lock);
}
- mutex_unlock(&radio->disconnect_lock);
}
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index 2f83be7..f8fc865 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -388,6 +388,15 @@
To compile this driver as a module, choose M here: the
module will be called tvp5150.
+config VIDEO_TVP7002
+ tristate "Texas Instruments TVP7002 video decoder"
+ depends on VIDEO_V4L2 && I2C
+ ---help---
+ Support for the Texas Instruments TVP7002 video decoder.
+
+ To compile this driver as a module, choose M here: the
+ module will be called tvp7002.
+
config VIDEO_VPX3220
tristate "vpx3220a, vpx3216b & vpx3214c video decoders"
depends on VIDEO_V4L2 && I2C
@@ -548,7 +557,6 @@
depends on ARCH_DAVINCI
help
Support for vpss system module for video driver
- default y
config VIDEO_VPFE_CAPTURE
tristate "VPFE Video Capture Driver"
@@ -592,6 +600,19 @@
To compile this driver as a module, choose M here: the
module will be called vpfe.
+config VIDEO_ISIF
+ tristate "ISIF HW module"
+ depends on ARCH_DAVINCI_DM365 && VIDEO_VPFE_CAPTURE
+ select VIDEO_VPSS_SYSTEM
+ default y
+ help
+ Enables ISIF hw module. This is the hardware module for
+ configuring ISIF in VPFE to capture Raw Bayer RGB data from
+ a image sensor or YUV data from a YUV source.
+
+ To compile this driver as a module, choose M here: the
+ module will be called vpfe.
+
source "drivers/media/video/bt8xx/Kconfig"
config VIDEO_PMS
@@ -638,9 +659,14 @@
information.
config VIDEO_CPIA
- tristate "CPiA Video For Linux"
+ tristate "CPiA Video For Linux (DEPRECATED)"
depends on VIDEO_V4L1
+ default n
---help---
+ This driver is DEPRECATED please use the gspca cpia1 module
+ instead. Note that you need atleast version 0.6.4 of libv4l for
+ the cpia1 gspca module.
+
This is the video4linux driver for cameras based on Vision's CPiA
(Colour Processor Interface ASIC), such as the Creative Labs Video
Blaster Webcam II. If you have one of these cameras, say Y here
@@ -944,6 +970,8 @@
source "drivers/media/video/em28xx/Kconfig"
+source "drivers/media/video/tlg2300/Kconfig"
+
source "drivers/media/video/cx231xx/Kconfig"
source "drivers/media/video/usbvision/Kconfig"
@@ -955,6 +983,7 @@
config VIDEO_OVCAMCHIP
tristate "OmniVision Camera Chip support (DEPRECATED)"
depends on I2C && VIDEO_V4L1
+ default n
---help---
This driver is DEPRECATED please use the gspca ov519 module
instead. Note that for the ov511 / ov518 support of the gspca module
@@ -971,6 +1000,7 @@
config USB_W9968CF
tristate "USB W996[87]CF JPEG Dual Mode Camera support (DEPRECATED)"
depends on VIDEO_V4L1 && I2C && VIDEO_OVCAMCHIP
+ default n
---help---
This driver is DEPRECATED please use the gspca ov519 module
instead. Note that for the w9968cf support of the gspca module
@@ -992,6 +1022,7 @@
config USB_OV511
tristate "USB OV511 Camera support (DEPRECATED)"
depends on VIDEO_V4L1
+ default n
---help---
This driver is DEPRECATED please use the gspca ov519 module
instead. Note that for the ov511 / ov518 support of the gspca module
@@ -1020,6 +1051,7 @@
config USB_STV680
tristate "USB STV680 (Pencam) Camera support (DEPRECATED)"
depends on VIDEO_V4L1
+ default n
---help---
This driver is DEPRECATED please use the gspca stv0680 module
instead. Note that for the gspca stv0680 module you need
diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
index 2af68ee..b88b617 100644
--- a/drivers/media/video/Makefile
+++ b/drivers/media/video/Makefile
@@ -56,6 +56,7 @@
obj-$(CONFIG_VIDEO_VINO) += indycam.o
obj-$(CONFIG_VIDEO_TVP5150) += tvp5150.o
obj-$(CONFIG_VIDEO_TVP514X) += tvp514x.o
+obj-$(CONFIG_VIDEO_TVP7002) += tvp7002.o
obj-$(CONFIG_VIDEO_MSP3400) += msp3400.o
obj-$(CONFIG_VIDEO_CS5345) += cs5345.o
obj-$(CONFIG_VIDEO_CS53L32A) += cs53l32a.o
@@ -99,6 +100,7 @@
obj-$(CONFIG_VIDEO_SAA7134) += saa7134/
obj-$(CONFIG_VIDEO_CX88) += cx88/
obj-$(CONFIG_VIDEO_EM28XX) += em28xx/
+obj-$(CONFIG_VIDEO_TLG2300) += tlg2300/
obj-$(CONFIG_VIDEO_CX231XX) += cx231xx/
obj-$(CONFIG_VIDEO_USBVISION) += usbvision/
obj-$(CONFIG_VIDEO_PVRUSB2) += pvrusb2/
diff --git a/drivers/media/video/bt819.c b/drivers/media/video/bt819.c
index 5bb0f9e..547e1a9 100644
--- a/drivers/media/video/bt819.c
+++ b/drivers/media/video/bt819.c
@@ -254,7 +254,7 @@
v4l2_err(sd, "no notify found!\n");
if (std & V4L2_STD_NTSC) {
- v4l2_subdev_notify(sd, BT819_FIFO_RESET_LOW, 0);
+ v4l2_subdev_notify(sd, BT819_FIFO_RESET_LOW, NULL);
bt819_setbit(decoder, 0x01, 0, 1);
bt819_setbit(decoder, 0x01, 1, 0);
bt819_setbit(decoder, 0x01, 5, 0);
@@ -263,7 +263,7 @@
/* bt819_setbit(decoder, 0x1a, 5, 1); */
timing = &timing_data[1];
} else if (std & V4L2_STD_PAL) {
- v4l2_subdev_notify(sd, BT819_FIFO_RESET_LOW, 0);
+ v4l2_subdev_notify(sd, BT819_FIFO_RESET_LOW, NULL);
bt819_setbit(decoder, 0x01, 0, 1);
bt819_setbit(decoder, 0x01, 1, 1);
bt819_setbit(decoder, 0x01, 5, 1);
@@ -288,7 +288,7 @@
bt819_write(decoder, 0x08, (timing->hscale >> 8) & 0xff);
bt819_write(decoder, 0x09, timing->hscale & 0xff);
decoder->norm = std;
- v4l2_subdev_notify(sd, BT819_FIFO_RESET_HIGH, 0);
+ v4l2_subdev_notify(sd, BT819_FIFO_RESET_HIGH, NULL);
return 0;
}
@@ -306,7 +306,7 @@
v4l2_err(sd, "no notify found!\n");
if (decoder->input != input) {
- v4l2_subdev_notify(sd, BT819_FIFO_RESET_LOW, 0);
+ v4l2_subdev_notify(sd, BT819_FIFO_RESET_LOW, NULL);
decoder->input = input;
/* select mode */
if (decoder->input == 0) {
@@ -316,7 +316,7 @@
bt819_setbit(decoder, 0x0b, 6, 1);
bt819_setbit(decoder, 0x1a, 1, 0);
}
- v4l2_subdev_notify(sd, BT819_FIFO_RESET_HIGH, 0);
+ v4l2_subdev_notify(sd, BT819_FIFO_RESET_HIGH, NULL);
}
return 0;
}
diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c
index ae08b07..cb46e8f 100644
--- a/drivers/media/video/bt8xx/bttv-driver.c
+++ b/drivers/media/video/bt8xx/bttv-driver.c
@@ -81,6 +81,7 @@
static int radio_nr[BTTV_MAX] = { [0 ... (BTTV_MAX-1)] = -1 };
static int vbi_nr[BTTV_MAX] = { [0 ... (BTTV_MAX-1)] = -1 };
static int debug_latency;
+static int disable_ir;
static unsigned int fdsr;
@@ -107,6 +108,7 @@
module_param(bttv_debug, int, 0644);
module_param(irq_debug, int, 0644);
module_param(debug_latency, int, 0644);
+module_param(disable_ir, int, 0444);
module_param(fdsr, int, 0444);
module_param(gbuffers, int, 0444);
@@ -139,6 +141,7 @@
MODULE_PARM_DESC(bttv_gpio,"log gpio changes, default is 0 (no)");
MODULE_PARM_DESC(bttv_debug,"debug messages, default is 0 (no)");
MODULE_PARM_DESC(irq_debug,"irq handler debug messages, default is 0 (no)");
+MODULE_PARM_DESC(disable_ir, "disable infrared remote support");
MODULE_PARM_DESC(gbuffers,"number of capture buffers. range 2-32, default 8");
MODULE_PARM_DESC(gbufsize,"size of the capture buffers, default is 0x208000");
MODULE_PARM_DESC(reset_crop,"reset cropping parameters at open(), default "
@@ -4461,8 +4464,10 @@
request_modules(btv);
}
- init_bttv_i2c_ir(btv);
- bttv_input_init(btv);
+ if (!disable_ir) {
+ init_bttv_i2c_ir(btv);
+ bttv_input_init(btv);
+ }
/* everything is fine */
bttv_num++;
diff --git a/drivers/media/video/bt8xx/bttv-input.c b/drivers/media/video/bt8xx/bttv-input.c
index 277a092..b320dbd 100644
--- a/drivers/media/video/bt8xx/bttv-input.c
+++ b/drivers/media/video/bt8xx/bttv-input.c
@@ -247,7 +247,7 @@
struct card_ir *ir;
struct ir_scancode_table *ir_codes = NULL;
struct input_dev *input_dev;
- int ir_type = IR_TYPE_OTHER;
+ u64 ir_type = IR_TYPE_OTHER;
int err = -ENOMEM;
if (!btv->has_remote)
@@ -389,7 +389,7 @@
bttv_ir_start(btv, ir);
/* all done */
- err = ir_input_register(btv->remote->dev, ir_codes);
+ err = ir_input_register(btv->remote->dev, ir_codes, NULL);
if (err)
goto err_out_stop;
diff --git a/drivers/media/video/cafe_ccic.c b/drivers/media/video/cafe_ccic.c
index 7bb9c1e..cbbf7e8 100644
--- a/drivers/media/video/cafe_ccic.c
+++ b/drivers/media/video/cafe_ccic.c
@@ -1907,7 +1907,6 @@
goto out_free;
mutex_init(&cam->s_mutex);
- mutex_lock(&cam->s_mutex);
spin_lock_init(&cam->dev_lock);
cam->state = S_NOTREADY;
cafe_set_config_needed(cam, 1);
@@ -1947,7 +1946,6 @@
* because the sensor could attach in this call chain, leading to
* unsightly deadlocks.
*/
- mutex_unlock(&cam->s_mutex); /* attach can deadlock */
ret = cafe_smbus_setup(cam);
if (ret)
goto out_freeirq;
@@ -1973,7 +1971,7 @@
cam->vdev.v4l2_dev = &cam->v4l2_dev;
ret = video_register_device(&cam->vdev, VFL_TYPE_GRABBER, -1);
if (ret)
- goto out_smbus;
+ goto out_unlock;
video_set_drvdata(&cam->vdev, cam);
/*
@@ -1988,6 +1986,8 @@
mutex_unlock(&cam->s_mutex);
return 0;
+out_unlock:
+ mutex_unlock(&cam->s_mutex);
out_smbus:
cafe_smbus_shutdown(cam);
out_freeirq:
diff --git a/drivers/media/video/cpia.c b/drivers/media/video/cpia.c
index 551ddf2..933ae4c 100644
--- a/drivers/media/video/cpia.c
+++ b/drivers/media/video/cpia.c
@@ -3737,9 +3737,6 @@
if (size > FRAME_NUM*CPIA_MAX_FRAME_SIZE)
return -EINVAL;
- if (!cam || !cam->ops)
- return -ENODEV;
-
/* make this _really_ smp-safe */
if (mutex_lock_interruptible(&cam->busy_lock))
return -EINTR;
diff --git a/drivers/media/video/cx18/Kconfig b/drivers/media/video/cx18/Kconfig
index e8a50a6..baf7e91 100644
--- a/drivers/media/video/cx18/Kconfig
+++ b/drivers/media/video/cx18/Kconfig
@@ -19,3 +19,14 @@
To compile this driver as a module, choose M here: the
module will be called cx18.
+
+config VIDEO_CX18_ALSA
+ tristate "Conexant 23418 DMA audio support"
+ depends on VIDEO_CX18 && SND && EXPERIMENTAL
+ select SND_PCM
+ ---help---
+ This is a video4linux driver for direct (DMA) audio on
+ Conexant 23418 based TV cards using ALSA.
+
+ To compile this driver as a module, choose M here: the
+ module will be called cx18-alsa.
diff --git a/drivers/media/video/cx18/Makefile b/drivers/media/video/cx18/Makefile
index f7bf0ed..2fadd9d 100644
--- a/drivers/media/video/cx18/Makefile
+++ b/drivers/media/video/cx18/Makefile
@@ -3,8 +3,10 @@
cx18-mailbox.o cx18-vbi.o cx18-audio.o cx18-video.o cx18-irq.o \
cx18-av-core.o cx18-av-audio.o cx18-av-firmware.o cx18-av-vbi.o cx18-scb.o \
cx18-dvb.o cx18-io.o
+cx18-alsa-objs := cx18-alsa-main.o cx18-alsa-pcm.o
obj-$(CONFIG_VIDEO_CX18) += cx18.o
+obj-$(CONFIG_VIDEO_CX18_ALSA) += cx18-alsa.o
EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core
EXTRA_CFLAGS += -Idrivers/media/dvb/frontends
diff --git a/drivers/media/video/cx18/cx18-alsa-main.c b/drivers/media/video/cx18/cx18-alsa-main.c
new file mode 100644
index 0000000..eb41d7e
--- /dev/null
+++ b/drivers/media/video/cx18/cx18-alsa-main.c
@@ -0,0 +1,293 @@
+/*
+ * ALSA interface to cx18 PCM capture streams
+ *
+ * Copyright (C) 2009 Andy Walls <awalls@radix.net>
+ * Copyright (C) 2009 Devin Heitmueller <dheitmueller@kernellabs.com>
+ *
+ * Portions of this work were sponsored by ONELAN Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+ * 02111-1307 USA
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/spinlock.h>
+
+#include <media/v4l2-device.h>
+
+#include <sound/core.h>
+#include <sound/initval.h>
+
+#include "cx18-driver.h"
+#include "cx18-version.h"
+#include "cx18-alsa.h"
+#include "cx18-alsa-mixer.h"
+#include "cx18-alsa-pcm.h"
+
+int cx18_alsa_debug;
+
+#define CX18_DEBUG_ALSA_INFO(fmt, arg...) \
+ do { \
+ if (cx18_alsa_debug & 2) \
+ printk(KERN_INFO "%s: " fmt, "cx18-alsa", ## arg); \
+ } while (0);
+
+module_param_named(debug, cx18_alsa_debug, int, 0644);
+MODULE_PARM_DESC(debug,
+ "Debug level (bitmask). Default: 0\n"
+ "\t\t\t 1/0x0001: warning\n"
+ "\t\t\t 2/0x0002: info\n");
+
+MODULE_AUTHOR("Andy Walls");
+MODULE_DESCRIPTION("CX23418 ALSA Interface");
+MODULE_SUPPORTED_DEVICE("CX23418 MPEG2 encoder");
+MODULE_LICENSE("GPL");
+
+MODULE_VERSION(CX18_VERSION);
+
+static inline
+struct snd_cx18_card *to_snd_cx18_card(struct v4l2_device *v4l2_dev)
+{
+ return to_cx18(v4l2_dev)->alsa;
+}
+
+static inline
+struct snd_cx18_card *p_to_snd_cx18_card(struct v4l2_device **v4l2_dev)
+{
+ return container_of(v4l2_dev, struct snd_cx18_card, v4l2_dev);
+}
+
+static void snd_cx18_card_free(struct snd_cx18_card *cxsc)
+{
+ if (cxsc == NULL)
+ return;
+
+ if (cxsc->v4l2_dev != NULL)
+ to_cx18(cxsc->v4l2_dev)->alsa = NULL;
+
+ /* FIXME - take any other stopping actions needed */
+
+ kfree(cxsc);
+}
+
+static void snd_cx18_card_private_free(struct snd_card *sc)
+{
+ if (sc == NULL)
+ return;
+ snd_cx18_card_free(sc->private_data);
+ sc->private_data = NULL;
+ sc->private_free = NULL;
+}
+
+static int snd_cx18_card_create(struct v4l2_device *v4l2_dev,
+ struct snd_card *sc,
+ struct snd_cx18_card **cxsc)
+{
+ *cxsc = kzalloc(sizeof(struct snd_cx18_card), GFP_KERNEL);
+ if (*cxsc == NULL)
+ return -ENOMEM;
+
+ (*cxsc)->v4l2_dev = v4l2_dev;
+ (*cxsc)->sc = sc;
+
+ sc->private_data = *cxsc;
+ sc->private_free = snd_cx18_card_private_free;
+
+ return 0;
+}
+
+static int snd_cx18_card_set_names(struct snd_cx18_card *cxsc)
+{
+ struct cx18 *cx = to_cx18(cxsc->v4l2_dev);
+ struct snd_card *sc = cxsc->sc;
+
+ /* sc->driver is used by alsa-lib's configurator: simple, unique */
+ strlcpy(sc->driver, "CX23418", sizeof(sc->driver));
+
+ /* sc->shortname is a symlink in /proc/asound: CX18-M -> cardN */
+ snprintf(sc->shortname, sizeof(sc->shortname), "CX18-%d",
+ cx->instance);
+
+ /* sc->longname is read from /proc/asound/cards */
+ snprintf(sc->longname, sizeof(sc->longname),
+ "CX23418 #%d %s TV/FM Radio/Line-In Capture",
+ cx->instance, cx->card_name);
+
+ return 0;
+}
+
+static int snd_cx18_init(struct v4l2_device *v4l2_dev)
+{
+ struct cx18 *cx = to_cx18(v4l2_dev);
+ struct snd_card *sc = NULL;
+ struct snd_cx18_card *cxsc;
+ int ret;
+
+ /* Numbrs steps from "Writing an ALSA Driver" by Takashi Iwai */
+
+ /* (1) Check and increment the device index */
+ /* This is a no-op for us. We'll use the cx->instance */
+
+ /* (2) Create a card instance */
+ ret = snd_card_create(SNDRV_DEFAULT_IDX1, /* use first available id */
+ SNDRV_DEFAULT_STR1, /* xid from end of shortname*/
+ THIS_MODULE, 0, &sc);
+ if (ret) {
+ CX18_ALSA_ERR("%s: snd_card_create() failed with err %d\n",
+ __func__, ret);
+ goto err_exit;
+ }
+
+ /* (3) Create a main component */
+ ret = snd_cx18_card_create(v4l2_dev, sc, &cxsc);
+ if (ret) {
+ CX18_ALSA_ERR("%s: snd_cx18_card_create() failed with err %d\n",
+ __func__, ret);
+ goto err_exit_free;
+ }
+
+ /* (4) Set the driver ID and name strings */
+ snd_cx18_card_set_names(cxsc);
+
+
+ ret = snd_cx18_pcm_create(cxsc);
+ if (ret) {
+ CX18_ALSA_ERR("%s: snd_cx18_pcm_create() failed with err %d\n",
+ __func__, ret);
+ goto err_exit_free;
+ }
+ /* FIXME - proc files */
+
+ /* (7) Set the driver data and return 0 */
+ /* We do this out of normal order for PCI drivers to avoid races */
+ cx->alsa = cxsc;
+
+ /* (6) Register the card instance */
+ ret = snd_card_register(sc);
+ if (ret) {
+ cx->alsa = NULL;
+ CX18_ALSA_ERR("%s: snd_card_register() failed with err %d\n",
+ __func__, ret);
+ goto err_exit_free;
+ }
+
+ return 0;
+
+err_exit_free:
+ if (sc != NULL)
+ snd_card_free(sc);
+err_exit:
+ return ret;
+}
+
+int cx18_alsa_load(struct cx18 *cx)
+{
+ struct v4l2_device *v4l2_dev = &cx->v4l2_dev;
+ struct cx18_stream *s;
+
+ if (v4l2_dev == NULL) {
+ printk(KERN_ERR "cx18-alsa: %s: struct v4l2_device * is NULL\n",
+ __func__);
+ return 0;
+ }
+
+ cx = to_cx18(v4l2_dev);
+ if (cx == NULL) {
+ printk(KERN_ERR "cx18-alsa cx is NULL\n");
+ return 0;
+ }
+
+ s = &cx->streams[CX18_ENC_STREAM_TYPE_PCM];
+ if (s->video_dev == NULL) {
+ CX18_DEBUG_ALSA_INFO("%s: PCM stream for card is disabled - "
+ "skipping\n", __func__);
+ return 0;
+ }
+
+ if (cx->alsa != NULL) {
+ CX18_ALSA_ERR("%s: struct snd_cx18_card * already exists\n",
+ __func__);
+ return 0;
+ }
+
+ if (snd_cx18_init(v4l2_dev)) {
+ CX18_ALSA_ERR("%s: failed to create struct snd_cx18_card\n",
+ __func__);
+ } else {
+ CX18_DEBUG_ALSA_INFO("%s: created cx18 ALSA interface instance "
+ "\n", __func__);
+ }
+ return 0;
+}
+
+static int __init cx18_alsa_init(void)
+{
+ printk(KERN_INFO "cx18-alsa: module loading...\n");
+ cx18_ext_init = &cx18_alsa_load;
+ return 0;
+}
+
+static void __exit snd_cx18_exit(struct snd_cx18_card *cxsc)
+{
+ struct cx18 *cx = to_cx18(cxsc->v4l2_dev);
+
+ /* FIXME - pointer checks & shutdown cxsc */
+
+ snd_card_free(cxsc->sc);
+ cx->alsa = NULL;
+}
+
+static int __exit cx18_alsa_exit_callback(struct device *dev, void *data)
+{
+ struct v4l2_device *v4l2_dev = dev_get_drvdata(dev);
+ struct snd_cx18_card *cxsc;
+
+ if (v4l2_dev == NULL) {
+ printk(KERN_ERR "cx18-alsa: %s: struct v4l2_device * is NULL\n",
+ __func__);
+ return 0;
+ }
+
+ cxsc = to_snd_cx18_card(v4l2_dev);
+ if (cxsc == NULL) {
+ CX18_ALSA_WARN("%s: struct snd_cx18_card * is NULL\n",
+ __func__);
+ return 0;
+ }
+
+ snd_cx18_exit(cxsc);
+ return 0;
+}
+
+static void __exit cx18_alsa_exit(void)
+{
+ struct device_driver *drv;
+ int ret;
+
+ printk(KERN_INFO "cx18-alsa: module unloading...\n");
+
+ drv = driver_find("cx18", &pci_bus_type);
+ ret = driver_for_each_device(drv, NULL, NULL, cx18_alsa_exit_callback);
+ put_driver(drv);
+
+ cx18_ext_init = NULL;
+ printk(KERN_INFO "cx18-alsa: module unload complete\n");
+}
+
+module_init(cx18_alsa_init);
+module_exit(cx18_alsa_exit);
diff --git a/drivers/media/video/cx18/cx18-alsa-mixer.c b/drivers/media/video/cx18/cx18-alsa-mixer.c
new file mode 100644
index 0000000..ef21114
--- /dev/null
+++ b/drivers/media/video/cx18/cx18-alsa-mixer.c
@@ -0,0 +1,175 @@
+/*
+ * ALSA mixer controls for the
+ * ALSA interface to cx18 PCM capture streams
+ *
+ * Copyright (C) 2009 Andy Walls <awalls@radix.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+ * 02111-1307 USA
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/spinlock.h>
+#include <linux/videodev2.h>
+
+#include <media/v4l2-device.h>
+
+#include <sound/core.h>
+#include <sound/control.h>
+#include <sound/tlv.h>
+
+#include "cx18-alsa.h"
+#include "cx18-driver.h"
+
+/*
+ * Note the cx18-av-core volume scale is funny, due to the alignment of the
+ * scale with another chip's range:
+ *
+ * v4l2_control value /512 indicated dB actual dB reg 0x8d4
+ * 0x0000 - 0x01ff 0 -119 -96 228
+ * 0x0200 - 0x02ff 1 -118 -96 228
+ * ...
+ * 0x2c00 - 0x2dff 22 -97 -96 228
+ * 0x2e00 - 0x2fff 23 -96 -96 228
+ * 0x3000 - 0x31ff 24 -95 -95 226
+ * ...
+ * 0xee00 - 0xefff 119 0 0 36
+ * ...
+ * 0xfe00 - 0xffff 127 +8 +8 20
+ */
+static inline int dB_to_cx18_av_vol(int dB)
+{
+ if (dB < -96)
+ dB = -96;
+ else if (dB > 8)
+ dB = 8;
+ return (dB + 119) << 9;
+}
+
+static inline int cx18_av_vol_to_dB(int v)
+{
+ if (v < (23 << 9))
+ v = (23 << 9);
+ else if (v > (127 << 9))
+ v = (127 << 9);
+ return (v >> 9) - 119;
+}
+
+static int snd_cx18_mixer_tv_vol_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+ uinfo->count = 1;
+ /* We're already translating values, just keep this control in dB */
+ uinfo->value.integer.min = -96;
+ uinfo->value.integer.max = 8;
+ uinfo->value.integer.step = 1;
+ return 0;
+}
+
+static int snd_cx18_mixer_tv_vol_get(struct snd_kcontrol *kctl,
+ struct snd_ctl_elem_value *uctl)
+{
+ struct snd_cx18_card *cxsc = snd_kcontrol_chip(kctl);
+ struct cx18 *cx = to_cx18(cxsc->v4l2_dev);
+ struct v4l2_control vctrl;
+ int ret;
+
+ vctrl.id = V4L2_CID_AUDIO_VOLUME;
+ vctrl.value = dB_to_cx18_av_vol(uctl->value.integer.value[0]);
+
+ snd_cx18_lock(cxsc);
+ ret = v4l2_subdev_call(cx->sd_av, core, g_ctrl, &vctrl);
+ snd_cx18_unlock(cxsc);
+
+ if (!ret)
+ uctl->value.integer.value[0] = cx18_av_vol_to_dB(vctrl.value);
+ return ret;
+}
+
+static int snd_cx18_mixer_tv_vol_put(struct snd_kcontrol *kctl,
+ struct snd_ctl_elem_value *uctl)
+{
+ struct snd_cx18_card *cxsc = snd_kcontrol_chip(kctl);
+ struct cx18 *cx = to_cx18(cxsc->v4l2_dev);
+ struct v4l2_control vctrl;
+ int ret;
+
+ vctrl.id = V4L2_CID_AUDIO_VOLUME;
+ vctrl.value = dB_to_cx18_av_vol(uctl->value.integer.value[0]);
+
+ snd_cx18_lock(cxsc);
+
+ /* Fetch current state */
+ ret = v4l2_subdev_call(cx->sd_av, core, g_ctrl, &vctrl);
+
+ if (ret ||
+ (cx18_av_vol_to_dB(vctrl.value) != uctl->value.integer.value[0])) {
+
+ /* Set, if needed */
+ vctrl.value = dB_to_cx18_av_vol(uctl->value.integer.value[0]);
+ ret = v4l2_subdev_call(cx->sd_av, core, s_ctrl, &vctrl);
+ if (!ret)
+ ret = 1; /* Indicate control was changed w/o error */
+ }
+ snd_cx18_unlock(cxsc);
+
+ return ret;
+}
+
+
+/* This is a bit of overkill, the slider is already in dB internally */
+static DECLARE_TLV_DB_SCALE(snd_cx18_mixer_tv_vol_db_scale, -9600, 100, 0);
+
+static struct snd_kcontrol_new snd_cx18_mixer_tv_vol __initdata = {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Analog TV Capture Volume",
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE |
+ SNDRV_CTL_ELEM_ACCESS_TLV_READ,
+ .info = snd_cx18_mixer_tv_volume_info,
+ .get = snd_cx18_mixer_tv_volume_get,
+ .put = snd_cx18_mixer_tv_volume_put,
+ .tlv.p = snd_cx18_mixer_tv_vol_db_scale
+};
+
+/* FIXME - add mute switch and balance, bass, treble sliders:
+ V4L2_CID_AUDIO_MUTE
+
+ V4L2_CID_AUDIO_BALANCE
+
+ V4L2_CID_AUDIO_BASS
+ V4L2_CID_AUDIO_TREBLE
+*/
+
+/* FIXME - add stereo, lang1, lang2, mono menu */
+/* FIXME - add CS5345 I2S volume for HVR-1600 */
+
+int __init snd_cx18_mixer_create(struct snd_cx18_card *cxsc)
+{
+ struct v4l2_device *v4l2_dev = cxsc->v4l2_dev;
+ struct snd_card *sc = cxsc->sc;
+ int ret;
+
+ strlcpy(sc->mixername, "CX23418 Mixer", sizeof(sc->mixername));
+
+ ret = snd_ctl_add(sc, snd_ctl_new1(snd_cx18_mixer_tv_vol, cxsc));
+ if (ret) {
+ CX18_ALSA_WARN("%s: failed to add %s control, err %d\n",
+ __func__, snd_cx18_mixer_tv_vol.name, ret);
+ }
+ return ret;
+}
diff --git a/drivers/media/video/cx18/cx18-alsa-mixer.h b/drivers/media/video/cx18/cx18-alsa-mixer.h
new file mode 100644
index 0000000..2d418db
--- /dev/null
+++ b/drivers/media/video/cx18/cx18-alsa-mixer.h
@@ -0,0 +1,23 @@
+/*
+ * ALSA mixer controls for the
+ * ALSA interface to cx18 PCM capture streams
+ *
+ * Copyright (C) 2009 Andy Walls <awalls@radix.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+ * 02111-1307 USA
+ */
+
+int __init snd_cx18_mixer_create(struct snd_cx18_card *cxsc);
diff --git a/drivers/media/video/cx18/cx18-alsa-pcm.c b/drivers/media/video/cx18/cx18-alsa-pcm.c
new file mode 100644
index 0000000..2bd312d
--- /dev/null
+++ b/drivers/media/video/cx18/cx18-alsa-pcm.c
@@ -0,0 +1,354 @@
+/*
+ * ALSA PCM device for the
+ * ALSA interface to cx18 PCM capture streams
+ *
+ * Copyright (C) 2009 Andy Walls <awalls@radix.net>
+ * Copyright (C) 2009 Devin Heitmueller <dheitmueller@kernellabs.com>
+ *
+ * Portions of this work were sponsored by ONELAN Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+ * 02111-1307 USA
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/vmalloc.h>
+
+#include <media/v4l2-device.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+
+#include "cx18-driver.h"
+#include "cx18-queue.h"
+#include "cx18-streams.h"
+#include "cx18-fileops.h"
+#include "cx18-alsa.h"
+
+static unsigned int pcm_debug;
+module_param(pcm_debug, int, 0644);
+MODULE_PARM_DESC(pcm_debug, "enable debug messages for pcm");
+
+#define dprintk(fmt, arg...) do { \
+ if (pcm_debug) \
+ printk(KERN_INFO "cx18-alsa-pcm %s: " fmt, \
+ __func__, ##arg); \
+ } while (0)
+
+static struct snd_pcm_hardware snd_cx18_hw_capture = {
+ .info = SNDRV_PCM_INFO_BLOCK_TRANSFER |
+ SNDRV_PCM_INFO_MMAP |
+ SNDRV_PCM_INFO_INTERLEAVED |
+ SNDRV_PCM_INFO_MMAP_VALID,
+
+ .formats = SNDRV_PCM_FMTBIT_S16_LE,
+
+ .rates = SNDRV_PCM_RATE_48000,
+
+ .rate_min = 48000,
+ .rate_max = 48000,
+ .channels_min = 2,
+ .channels_max = 2,
+ .buffer_bytes_max = 62720 * 8, /* just about the value in usbaudio.c */
+ .period_bytes_min = 64, /* 12544/2, */
+ .period_bytes_max = 12544,
+ .periods_min = 2,
+ .periods_max = 98, /* 12544, */
+};
+
+void cx18_alsa_announce_pcm_data(struct snd_cx18_card *cxsc, u8 *pcm_data,
+ size_t num_bytes)
+{
+ struct snd_pcm_substream *substream;
+ struct snd_pcm_runtime *runtime;
+ unsigned int oldptr;
+ unsigned int stride;
+ int period_elapsed = 0;
+ int length;
+
+ dprintk("cx18 alsa announce ptr=%p data=%p num_bytes=%zd\n", cxsc,
+ pcm_data, num_bytes);
+
+ substream = cxsc->capture_pcm_substream;
+ if (substream == NULL) {
+ dprintk("substream was NULL\n");
+ return;
+ }
+
+ runtime = substream->runtime;
+ if (runtime == NULL) {
+ dprintk("runtime was NULL\n");
+ return;
+ }
+
+ stride = runtime->frame_bits >> 3;
+ if (stride == 0) {
+ dprintk("stride is zero\n");
+ return;
+ }
+
+ length = num_bytes / stride;
+ if (length == 0) {
+ dprintk("%s: length was zero\n", __func__);
+ return;
+ }
+
+ if (runtime->dma_area == NULL) {
+ dprintk("dma area was NULL - ignoring\n");
+ return;
+ }
+
+ oldptr = cxsc->hwptr_done_capture;
+ if (oldptr + length >= runtime->buffer_size) {
+ unsigned int cnt =
+ runtime->buffer_size - oldptr;
+ memcpy(runtime->dma_area + oldptr * stride, pcm_data,
+ cnt * stride);
+ memcpy(runtime->dma_area, pcm_data + cnt * stride,
+ length * stride - cnt * stride);
+ } else {
+ memcpy(runtime->dma_area + oldptr * stride, pcm_data,
+ length * stride);
+ }
+ snd_pcm_stream_lock(substream);
+
+ cxsc->hwptr_done_capture += length;
+ if (cxsc->hwptr_done_capture >=
+ runtime->buffer_size)
+ cxsc->hwptr_done_capture -=
+ runtime->buffer_size;
+
+ cxsc->capture_transfer_done += length;
+ if (cxsc->capture_transfer_done >=
+ runtime->period_size) {
+ cxsc->capture_transfer_done -=
+ runtime->period_size;
+ period_elapsed = 1;
+ }
+
+ snd_pcm_stream_unlock(substream);
+
+ if (period_elapsed)
+ snd_pcm_period_elapsed(substream);
+}
+
+static int snd_cx18_pcm_capture_open(struct snd_pcm_substream *substream)
+{
+ struct snd_cx18_card *cxsc = snd_pcm_substream_chip(substream);
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct v4l2_device *v4l2_dev = cxsc->v4l2_dev;
+ struct cx18 *cx = to_cx18(v4l2_dev);
+ struct cx18_stream *s;
+ struct cx18_open_id item;
+ int ret;
+
+ /* Instruct the cx18 to start sending packets */
+ snd_cx18_lock(cxsc);
+ s = &cx->streams[CX18_ENC_STREAM_TYPE_PCM];
+
+ item.cx = cx;
+ item.type = s->type;
+ item.open_id = cx->open_id++;
+
+ /* See if the stream is available */
+ if (cx18_claim_stream(&item, item.type)) {
+ /* No, it's already in use */
+ snd_cx18_unlock(cxsc);
+ return -EBUSY;
+ }
+
+ if (test_bit(CX18_F_S_STREAMOFF, &s->s_flags) ||
+ test_and_set_bit(CX18_F_S_STREAMING, &s->s_flags)) {
+ /* We're already streaming. No additional action required */
+ snd_cx18_unlock(cxsc);
+ return 0;
+ }
+
+
+ runtime->hw = snd_cx18_hw_capture;
+ snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS);
+ cxsc->capture_pcm_substream = substream;
+ runtime->private_data = cx;
+
+ cx->pcm_announce_callback = cx18_alsa_announce_pcm_data;
+
+ /* Not currently streaming, so start it up */
+ set_bit(CX18_F_S_STREAMING, &s->s_flags);
+ ret = cx18_start_v4l2_encode_stream(s);
+ snd_cx18_unlock(cxsc);
+
+ return 0;
+}
+
+static int snd_cx18_pcm_capture_close(struct snd_pcm_substream *substream)
+{
+ struct snd_cx18_card *cxsc = snd_pcm_substream_chip(substream);
+ struct v4l2_device *v4l2_dev = cxsc->v4l2_dev;
+ struct cx18 *cx = to_cx18(v4l2_dev);
+ struct cx18_stream *s;
+ int ret;
+
+ /* Instruct the cx18 to stop sending packets */
+ snd_cx18_lock(cxsc);
+ s = &cx->streams[CX18_ENC_STREAM_TYPE_PCM];
+ ret = cx18_stop_v4l2_encode_stream(s, 0);
+ clear_bit(CX18_F_S_STREAMING, &s->s_flags);
+
+ cx18_release_stream(s);
+
+ cx->pcm_announce_callback = NULL;
+ snd_cx18_unlock(cxsc);
+
+ return 0;
+}
+
+static int snd_cx18_pcm_ioctl(struct snd_pcm_substream *substream,
+ unsigned int cmd, void *arg)
+{
+ return snd_pcm_lib_ioctl(substream, cmd, arg);
+}
+
+
+static int snd_pcm_alloc_vmalloc_buffer(struct snd_pcm_substream *subs,
+ size_t size)
+{
+ struct snd_pcm_runtime *runtime = subs->runtime;
+
+ dprintk("Allocating vbuffer\n");
+ if (runtime->dma_area) {
+ if (runtime->dma_bytes > size)
+ return 0;
+
+ vfree(runtime->dma_area);
+ }
+ runtime->dma_area = vmalloc(size);
+ if (!runtime->dma_area)
+ return -ENOMEM;
+
+ runtime->dma_bytes = size;
+
+ return 0;
+}
+
+static int snd_cx18_pcm_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ int ret;
+
+ dprintk("%s called\n", __func__);
+
+ ret = snd_pcm_alloc_vmalloc_buffer(substream,
+ params_buffer_bytes(params));
+ return 0;
+}
+
+static int snd_cx18_pcm_hw_free(struct snd_pcm_substream *substream)
+{
+ struct snd_cx18_card *cxsc = snd_pcm_substream_chip(substream);
+ unsigned long flags;
+
+ spin_lock_irqsave(&cxsc->slock, flags);
+ if (substream->runtime->dma_area) {
+ dprintk("freeing pcm capture region\n");
+ vfree(substream->runtime->dma_area);
+ substream->runtime->dma_area = NULL;
+ }
+ spin_unlock_irqrestore(&cxsc->slock, flags);
+
+ return 0;
+}
+
+static int snd_cx18_pcm_prepare(struct snd_pcm_substream *substream)
+{
+ struct snd_cx18_card *cxsc = snd_pcm_substream_chip(substream);
+
+ cxsc->hwptr_done_capture = 0;
+ cxsc->capture_transfer_done = 0;
+
+ return 0;
+}
+
+static int snd_cx18_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+ return 0;
+}
+
+static
+snd_pcm_uframes_t snd_cx18_pcm_pointer(struct snd_pcm_substream *substream)
+{
+ unsigned long flags;
+ snd_pcm_uframes_t hwptr_done;
+ struct snd_cx18_card *cxsc = snd_pcm_substream_chip(substream);
+
+ spin_lock_irqsave(&cxsc->slock, flags);
+ hwptr_done = cxsc->hwptr_done_capture;
+ spin_unlock_irqrestore(&cxsc->slock, flags);
+
+ return hwptr_done;
+}
+
+static struct page *snd_pcm_get_vmalloc_page(struct snd_pcm_substream *subs,
+ unsigned long offset)
+{
+ void *pageptr = subs->runtime->dma_area + offset;
+
+ return vmalloc_to_page(pageptr);
+}
+
+static struct snd_pcm_ops snd_cx18_pcm_capture_ops = {
+ .open = snd_cx18_pcm_capture_open,
+ .close = snd_cx18_pcm_capture_close,
+ .ioctl = snd_cx18_pcm_ioctl,
+ .hw_params = snd_cx18_pcm_hw_params,
+ .hw_free = snd_cx18_pcm_hw_free,
+ .prepare = snd_cx18_pcm_prepare,
+ .trigger = snd_cx18_pcm_trigger,
+ .pointer = snd_cx18_pcm_pointer,
+ .page = snd_pcm_get_vmalloc_page,
+};
+
+int snd_cx18_pcm_create(struct snd_cx18_card *cxsc)
+{
+ struct snd_pcm *sp;
+ struct snd_card *sc = cxsc->sc;
+ struct v4l2_device *v4l2_dev = cxsc->v4l2_dev;
+ struct cx18 *cx = to_cx18(v4l2_dev);
+ int ret;
+
+ ret = snd_pcm_new(sc, "CX23418 PCM",
+ 0, /* PCM device 0, the only one for this card */
+ 0, /* 0 playback substreams */
+ 1, /* 1 capture substream */
+ &sp);
+ if (ret) {
+ CX18_ALSA_ERR("%s: snd_cx18_pcm_create() failed with err %d\n",
+ __func__, ret);
+ goto err_exit;
+ }
+
+ spin_lock_init(&cxsc->slock);
+
+ snd_pcm_set_ops(sp, SNDRV_PCM_STREAM_CAPTURE,
+ &snd_cx18_pcm_capture_ops);
+ sp->info_flags = 0;
+ sp->private_data = cxsc;
+ strlcpy(sp->name, cx->card_name, sizeof(sp->name));
+
+ return 0;
+
+err_exit:
+ return ret;
+}
diff --git a/drivers/media/video/cx18/cx18-alsa-pcm.h b/drivers/media/video/cx18/cx18-alsa-pcm.h
new file mode 100644
index 0000000..325662c
--- /dev/null
+++ b/drivers/media/video/cx18/cx18-alsa-pcm.h
@@ -0,0 +1,27 @@
+/*
+ * ALSA PCM device for the
+ * ALSA interface to cx18 PCM capture streams
+ *
+ * Copyright (C) 2009 Andy Walls <awalls@radix.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+ * 02111-1307 USA
+ */
+
+int __init snd_cx18_pcm_create(struct snd_cx18_card *cxsc);
+
+/* Used by cx18-mailbox to announce the PCM data to the module */
+void cx18_alsa_announce_pcm_data(struct snd_cx18_card *card, u8 *pcm_data,
+ size_t num_bytes);
diff --git a/drivers/media/video/cx18/cx18-alsa.h b/drivers/media/video/cx18/cx18-alsa.h
new file mode 100644
index 0000000..88a1cde
--- /dev/null
+++ b/drivers/media/video/cx18/cx18-alsa.h
@@ -0,0 +1,75 @@
+/*
+ * ALSA interface to cx18 PCM capture streams
+ *
+ * Copyright (C) 2009 Andy Walls <awalls@radix.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+ * 02111-1307 USA
+ */
+
+struct snd_card;
+
+struct snd_cx18_card {
+ struct v4l2_device *v4l2_dev;
+ struct snd_card *sc;
+ unsigned int capture_transfer_done;
+ unsigned int hwptr_done_capture;
+ struct snd_pcm_substream *capture_pcm_substream;
+ spinlock_t slock;
+};
+
+extern int cx18_alsa_debug;
+
+/*
+ * File operations that manipulate the encoder or video or audio subdevices
+ * need to be serialized. Use the same lock we use for v4l2 file ops.
+ */
+static inline void snd_cx18_lock(struct snd_cx18_card *cxsc)
+{
+ struct cx18 *cx = to_cx18(cxsc->v4l2_dev);
+ mutex_lock(&cx->serialize_lock);
+}
+
+static inline void snd_cx18_unlock(struct snd_cx18_card *cxsc)
+{
+ struct cx18 *cx = to_cx18(cxsc->v4l2_dev);
+ mutex_unlock(&cx->serialize_lock);
+}
+
+#define CX18_ALSA_DBGFLG_WARN (1 << 0)
+#define CX18_ALSA_DBGFLG_WARN (1 << 0)
+#define CX18_ALSA_DBGFLG_INFO (1 << 1)
+
+#define CX18_ALSA_DEBUG(x, type, fmt, args...) \
+ do { \
+ if ((x) & cx18_alsa_debug) \
+ printk(KERN_INFO "%s-alsa: " type ": " fmt, \
+ v4l2_dev->name , ## args); \
+ } while (0)
+
+#define CX18_ALSA_DEBUG_WARN(fmt, args...) \
+ CX18_ALSA_DEBUG(CX18_ALSA_DBGFLG_WARN, "warning", fmt , ## args)
+
+#define CX18_ALSA_DEBUG_INFO(fmt, args...) \
+ CX18_ALSA_DEBUG(CX18_ALSA_DBGFLG_INFO, "info", fmt , ## args)
+
+#define CX18_ALSA_ERR(fmt, args...) \
+ printk(KERN_ERR "%s-alsa: " fmt, v4l2_dev->name , ## args)
+
+#define CX18_ALSA_WARN(fmt, args...) \
+ printk(KERN_WARNING "%s-alsa: " fmt, v4l2_dev->name , ## args)
+
+#define CX18_ALSA_INFO(fmt, args...) \
+ printk(KERN_INFO "%s-alsa: " fmt, v4l2_dev->name , ## args)
diff --git a/drivers/media/video/cx18/cx18-cards.c b/drivers/media/video/cx18/cx18-cards.c
index f11e47a..f808fb6 100644
--- a/drivers/media/video/cx18/cx18-cards.c
+++ b/drivers/media/video/cx18/cx18-cards.c
@@ -393,7 +393,7 @@
.gpio_init.direction = 0x7,
.gpio_audio_input = { .mask = 0x7,
.tuner = 0x6, .linein = 0x2, .radio = 0x2 },
- .xceive_pin = 15,
+ .xceive_pin = 1,
.pci_list = cx18_pci_leadtek_pvr2100,
.i2c = &cx18_i2c_std,
};
diff --git a/drivers/media/video/cx18/cx18-driver.c b/drivers/media/video/cx18/cx18-driver.c
index 7f65a47..c95a86b 100644
--- a/drivers/media/video/cx18/cx18-driver.c
+++ b/drivers/media/video/cx18/cx18-driver.c
@@ -47,6 +47,10 @@
setting this to 1 you ensure that radio0 is now also radio1. */
int cx18_first_minor;
+/* Callback for registering extensions */
+int (*cx18_ext_init)(struct cx18 *);
+EXPORT_SYMBOL(cx18_ext_init);
+
/* add your revision and whatnot here */
static struct pci_device_id cx18_pci_tbl[] __devinitdata = {
{PCI_VENDOR_ID_CX, PCI_DEVICE_ID_CX23418,
@@ -91,7 +95,7 @@
static int enc_ts_bufs = -1;
static int enc_mpg_bufs = -1;
-static int enc_idx_bufs = -1;
+static int enc_idx_bufs = CX18_MAX_FW_MDLS_PER_STREAM;
static int enc_yuv_bufs = -1;
static int enc_vbi_bufs = -1;
static int enc_pcm_bufs = -1;
@@ -196,14 +200,17 @@
"Number of encoder MPG buffers\n"
"\t\t\tDefault is computed from other enc_mpg_* parameters");
MODULE_PARM_DESC(enc_idx_buffers,
- "Encoder IDX buffer memory (MB). (enc_idx_bufs can override)\n"
- "\t\t\tDefault: " __stringify(CX18_DEFAULT_ENC_IDX_BUFFERS));
+ "(Deprecated) Encoder IDX buffer memory (MB)\n"
+ "\t\t\tIgnored, except 0 disables IDX buffer allocations\n"
+ "\t\t\tDefault: 1 [Enabled]");
MODULE_PARM_DESC(enc_idx_bufsize,
"Size of an encoder IDX buffer (kB)\n"
- "\t\t\tDefault: " __stringify(CX18_DEFAULT_ENC_IDX_BUFSIZE));
+ "\t\t\tAllowed values are multiples of 1.5 kB rounded up\n"
+ "\t\t\t(multiples of size required for 64 index entries)\n"
+ "\t\t\tDefault: 2");
MODULE_PARM_DESC(enc_idx_bufs,
"Number of encoder IDX buffers\n"
- "\t\t\tDefault is computed from other enc_idx_* parameters");
+ "\t\t\tDefault: " __stringify(CX18_MAX_FW_MDLS_PER_STREAM));
MODULE_PARM_DESC(enc_yuv_buffers,
"Encoder YUV buffer memory (MB). (enc_yuv_bufs can override)\n"
"\t\t\tDefault: " __stringify(CX18_DEFAULT_ENC_YUV_BUFFERS));
@@ -231,7 +238,8 @@
"Number of encoder PCM buffers\n"
"\t\t\tDefault is computed from other enc_pcm_* parameters");
-MODULE_PARM_DESC(cx18_first_minor, "Set device node number assigned to first card");
+MODULE_PARM_DESC(cx18_first_minor,
+ "Set device node number assigned to first card");
MODULE_AUTHOR("Hans Verkuil");
MODULE_DESCRIPTION("CX23418 driver");
@@ -240,6 +248,28 @@
MODULE_VERSION(CX18_VERSION);
+#if defined(CONFIG_MODULES) && defined(MODULE)
+static void request_module_async(struct work_struct *work)
+{
+ struct cx18 *dev = container_of(work, struct cx18, request_module_wk);
+
+ /* Make sure cx18-alsa module is loaded */
+ request_module("cx18-alsa");
+
+ /* Initialize cx18-alsa for this instance of the cx18 device */
+ if (cx18_ext_init != NULL)
+ cx18_ext_init(dev);
+}
+
+static void request_modules(struct cx18 *dev)
+{
+ INIT_WORK(&dev->request_module_wk, request_module_async);
+ schedule_work(&dev->request_module_wk);
+}
+#else
+#define request_modules(dev)
+#endif /* CONFIG_MODULES */
+
/* Generic utility functions */
int cx18_msleep_timeout(unsigned int msecs, int intr)
{
@@ -501,7 +531,12 @@
/*
* YUV is a special case where the stream_buf_size needs to be
* an integral multiple of 33.75 kB (storage for 32 screens
- * lines to maintain alignment in case of lost buffers
+ * lines to maintain alignment in case of lost buffers).
+ *
+ * IDX is a special case where the stream_buf_size should be
+ * an integral multiple of 1.5 kB (storage for 64 index entries
+ * to maintain alignment in case of lost buffers).
+ *
*/
if (i == CX18_ENC_STREAM_TYPE_YUV) {
cx->stream_buf_size[i] *= 1024;
@@ -511,15 +546,24 @@
if (cx->stream_buf_size[i] < CX18_UNIT_ENC_YUV_BUFSIZE)
cx->stream_buf_size[i] =
CX18_UNIT_ENC_YUV_BUFSIZE;
+ } else if (i == CX18_ENC_STREAM_TYPE_IDX) {
+ cx->stream_buf_size[i] *= 1024;
+ cx->stream_buf_size[i] -=
+ (cx->stream_buf_size[i] % CX18_UNIT_ENC_IDX_BUFSIZE);
+
+ if (cx->stream_buf_size[i] < CX18_UNIT_ENC_IDX_BUFSIZE)
+ cx->stream_buf_size[i] =
+ CX18_UNIT_ENC_IDX_BUFSIZE;
}
/*
- * YUV is a special case where the stream_buf_size is
+ * YUV and IDX are special cases where the stream_buf_size is
* now in bytes.
* VBI is a special case where the stream_buf_size is fixed
* and already in bytes
*/
if (i == CX18_ENC_STREAM_TYPE_VBI ||
- i == CX18_ENC_STREAM_TYPE_YUV) {
+ i == CX18_ENC_STREAM_TYPE_YUV ||
+ i == CX18_ENC_STREAM_TYPE_IDX) {
if (cx->stream_buffers[i] < 0) {
cx->stream_buffers[i] =
cx->options.megabytes[i] * 1024 * 1024
@@ -1032,6 +1076,10 @@
}
CX18_INFO("Initialized card: %s\n", cx->card_name);
+
+ /* Load cx18 submodules (cx18-alsa) */
+ request_modules(cx);
+
return 0;
free_streams:
@@ -1220,6 +1268,7 @@
kfree(cx);
}
+
/* define a pci_driver for card detection */
static struct pci_driver cx18_pci_driver = {
.name = "cx18",
@@ -1230,7 +1279,8 @@
static int __init module_start(void)
{
- printk(KERN_INFO "cx18: Start initialization, version %s\n", CX18_VERSION);
+ printk(KERN_INFO "cx18: Start initialization, version %s\n",
+ CX18_VERSION);
/* Validate parameters */
if (cx18_first_minor < 0 || cx18_first_minor >= CX18_MAX_CARDS) {
diff --git a/drivers/media/video/cx18/cx18-driver.h b/drivers/media/video/cx18/cx18-driver.h
index e3f7911..23ad6d5 100644
--- a/drivers/media/video/cx18/cx18-driver.h
+++ b/drivers/media/video/cx18/cx18-driver.h
@@ -126,10 +126,22 @@
#define CX18_625_LINE_ENC_YUV_BUFSIZE (CX18_UNIT_ENC_YUV_BUFSIZE * 576/32)
#define CX18_525_LINE_ENC_YUV_BUFSIZE (CX18_UNIT_ENC_YUV_BUFSIZE * 480/32)
+/* IDX buffer size should be a multiple of the index entry size from the chip */
+struct cx18_enc_idx_entry {
+ __le32 length;
+ __le32 offset_low;
+ __le32 offset_high;
+ __le32 flags;
+ __le32 pts_low;
+ __le32 pts_high;
+} __attribute__ ((packed));
+#define CX18_UNIT_ENC_IDX_BUFSIZE \
+ (sizeof(struct cx18_enc_idx_entry) * V4L2_ENC_IDX_ENTRIES)
+
/* DMA buffer, default size in kB allocated */
#define CX18_DEFAULT_ENC_TS_BUFSIZE 32
#define CX18_DEFAULT_ENC_MPG_BUFSIZE 32
-#define CX18_DEFAULT_ENC_IDX_BUFSIZE 32
+#define CX18_DEFAULT_ENC_IDX_BUFSIZE (CX18_UNIT_ENC_IDX_BUFSIZE * 1 / 1024 + 1)
#define CX18_DEFAULT_ENC_YUV_BUFSIZE (CX18_UNIT_ENC_YUV_BUFSIZE * 3 / 1024 + 1)
#define CX18_DEFAULT_ENC_PCM_BUFSIZE 4
@@ -234,16 +246,8 @@
#define CX18_WARN_DEV(dev, fmt, args...) v4l2_warn(dev, fmt , ## args)
#define CX18_INFO_DEV(dev, fmt, args...) v4l2_info(dev, fmt , ## args)
-/* Values for CX18_API_DEC_PLAYBACK_SPEED mpeg_frame_type_mask parameter: */
-#define MPEG_FRAME_TYPE_IFRAME 1
-#define MPEG_FRAME_TYPE_IFRAME_PFRAME 3
-#define MPEG_FRAME_TYPE_ALL 7
-
-#define CX18_MAX_PGM_INDEX (400)
-
extern int cx18_debug;
-
struct cx18_options {
int megabytes[CX18_MAX_STREAMS]; /* Size in megabytes of each stream */
int cardtype; /* force card type on load */
@@ -276,6 +280,18 @@
#define CX18_SLICED_TYPE_WSS_625 (5)
#define CX18_SLICED_TYPE_VPS (7)
+/**
+ * list_entry_is_past_end - check if a previous loop cursor is off list end
+ * @pos: the type * previously used as a loop cursor.
+ * @head: the head for your list.
+ * @member: the name of the list_struct within the struct.
+ *
+ * Check if the entry's list_head is the head of the list, thus it's not a
+ * real entry but was the loop cursor that walked past the end
+ */
+#define list_entry_is_past_end(pos, head, member) \
+ (&pos->member == (head))
+
struct cx18_buffer {
struct list_head list;
dma_addr_t dma_handle;
@@ -558,6 +574,10 @@
int stream_buffers[CX18_MAX_STREAMS]; /* # of buffers for each stream */
int stream_buf_size[CX18_MAX_STREAMS]; /* Stream buffer size */
struct cx18_stream streams[CX18_MAX_STREAMS]; /* Stream data */
+ struct snd_cx18_card *alsa; /* ALSA interface for PCM capture stream */
+ void (*pcm_announce_callback)(struct snd_cx18_card *card, u8 *pcm_data,
+ size_t num_bytes);
+
unsigned long i_flags; /* global cx18 flags */
atomic_t ana_capturing; /* count number of active analog capture streams */
atomic_t tot_capturing; /* total count number of active capture streams */
@@ -575,12 +595,6 @@
struct vbi_info vbi;
- u32 pgm_info_offset;
- u32 pgm_info_num;
- u32 pgm_info_write_idx;
- u32 pgm_info_read_idx;
- struct v4l2_enc_idx_entry pgm_info[CX18_MAX_PGM_INDEX];
-
u64 mpg_data_received;
u64 vbi_data_inserted;
@@ -623,6 +637,9 @@
u32 active_input;
v4l2_std_id std;
v4l2_std_id tuner_std; /* The norm of the tuner (fixed) */
+
+ /* Used for cx18-alsa module loading */
+ struct work_struct request_module_wk;
};
static inline struct cx18 *to_cx18(struct v4l2_device *v4l2_dev)
@@ -630,6 +647,9 @@
return container_of(v4l2_dev, struct cx18, v4l2_dev);
}
+/* cx18 extensions to be loaded */
+extern int (*cx18_ext_init)(struct cx18 *);
+
/* Globals */
extern int cx18_first_minor;
diff --git a/drivers/media/video/cx18/cx18-dvb.c b/drivers/media/video/cx18/cx18-dvb.c
index 71ad2d1..0ae2c2e 100644
--- a/drivers/media/video/cx18/cx18-dvb.c
+++ b/drivers/media/video/cx18/cx18-dvb.c
@@ -213,10 +213,14 @@
{
struct dvb_demux *demux = feed->demux;
struct cx18_stream *stream = (struct cx18_stream *) demux->priv;
- struct cx18 *cx = stream->cx;
+ struct cx18 *cx;
int ret;
u32 v;
+ if (!stream)
+ return -EINVAL;
+
+ cx = stream->cx;
CX18_DEBUG_INFO("Start feed: pid = 0x%x index = %d\n",
feed->pid, feed->index);
@@ -253,12 +257,10 @@
if (!demux->dmx.frontend)
return -EINVAL;
- if (!stream)
- return -EINVAL;
-
mutex_lock(&stream->dvb.feedlock);
if (stream->dvb.feeding++ == 0) {
CX18_DEBUG_INFO("Starting Transport DMA\n");
+ mutex_lock(&cx->serialize_lock);
set_bit(CX18_F_S_STREAMING, &stream->s_flags);
ret = cx18_start_v4l2_encode_stream(stream);
if (ret < 0) {
@@ -267,6 +269,7 @@
if (stream->dvb.feeding == 0)
clear_bit(CX18_F_S_STREAMING, &stream->s_flags);
}
+ mutex_unlock(&cx->serialize_lock);
} else
ret = 0;
mutex_unlock(&stream->dvb.feedlock);
@@ -279,17 +282,20 @@
{
struct dvb_demux *demux = feed->demux;
struct cx18_stream *stream = (struct cx18_stream *)demux->priv;
- struct cx18 *cx = stream->cx;
+ struct cx18 *cx;
int ret = -EINVAL;
- CX18_DEBUG_INFO("Stop feed: pid = 0x%x index = %d\n",
- feed->pid, feed->index);
-
if (stream) {
+ cx = stream->cx;
+ CX18_DEBUG_INFO("Stop feed: pid = 0x%x index = %d\n",
+ feed->pid, feed->index);
+
mutex_lock(&stream->dvb.feedlock);
if (--stream->dvb.feeding == 0) {
CX18_DEBUG_INFO("Stopping Transport DMA\n");
+ mutex_lock(&cx->serialize_lock);
ret = cx18_stop_v4l2_encode_stream(stream, 0);
+ mutex_unlock(&cx->serialize_lock);
} else
ret = 0;
mutex_unlock(&stream->dvb.feedlock);
diff --git a/drivers/media/video/cx18/cx18-fileops.c b/drivers/media/video/cx18/cx18-fileops.c
index c0885c6..863ce77 100644
--- a/drivers/media/video/cx18/cx18-fileops.c
+++ b/drivers/media/video/cx18/cx18-fileops.c
@@ -37,15 +37,21 @@
/* This function tries to claim the stream for a specific file descriptor.
If no one else is using this stream then the stream is claimed and
- associated VBI streams are also automatically claimed.
+ associated VBI and IDX streams are also automatically claimed.
Possible error returns: -EBUSY if someone else has claimed
the stream or 0 on success. */
-static int cx18_claim_stream(struct cx18_open_id *id, int type)
+int cx18_claim_stream(struct cx18_open_id *id, int type)
{
struct cx18 *cx = id->cx;
struct cx18_stream *s = &cx->streams[type];
- struct cx18_stream *s_vbi;
- int vbi_type;
+ struct cx18_stream *s_assoc;
+
+ /* Nothing should ever try to directly claim the IDX stream */
+ if (type == CX18_ENC_STREAM_TYPE_IDX) {
+ CX18_WARN("MPEG Index stream cannot be claimed "
+ "directly, but something tried.\n");
+ return -EINVAL;
+ }
if (test_and_set_bit(CX18_F_S_CLAIMED, &s->s_flags)) {
/* someone already claimed this stream */
@@ -67,32 +73,47 @@
}
s->id = id->open_id;
- /* CX18_ENC_STREAM_TYPE_MPG needs to claim CX18_ENC_STREAM_TYPE_VBI
- (provided VBI insertion is on and sliced VBI is selected), for all
- other streams we're done */
- if (type == CX18_ENC_STREAM_TYPE_MPG &&
- cx->vbi.insert_mpeg && !cx18_raw_vbi(cx)) {
- vbi_type = CX18_ENC_STREAM_TYPE_VBI;
- } else {
+ /*
+ * CX18_ENC_STREAM_TYPE_MPG needs to claim:
+ * CX18_ENC_STREAM_TYPE_VBI, if VBI insertion is on for sliced VBI, or
+ * CX18_ENC_STREAM_TYPE_IDX, if VBI insertion is off for sliced VBI
+ * (We don't yet fix up MPEG Index entries for our inserted packets).
+ *
+ * For all other streams we're done.
+ */
+ if (type != CX18_ENC_STREAM_TYPE_MPG)
return 0;
- }
- s_vbi = &cx->streams[vbi_type];
- set_bit(CX18_F_S_CLAIMED, &s_vbi->s_flags);
+ s_assoc = &cx->streams[CX18_ENC_STREAM_TYPE_IDX];
+ if (cx->vbi.insert_mpeg && !cx18_raw_vbi(cx))
+ s_assoc = &cx->streams[CX18_ENC_STREAM_TYPE_VBI];
+ else if (!cx18_stream_enabled(s_assoc))
+ return 0;
+
+ set_bit(CX18_F_S_CLAIMED, &s_assoc->s_flags);
/* mark that it is used internally */
- set_bit(CX18_F_S_INTERNAL_USE, &s_vbi->s_flags);
+ set_bit(CX18_F_S_INTERNAL_USE, &s_assoc->s_flags);
return 0;
}
+EXPORT_SYMBOL(cx18_claim_stream);
/* This function releases a previously claimed stream. It will take into
account associated VBI streams. */
-static void cx18_release_stream(struct cx18_stream *s)
+void cx18_release_stream(struct cx18_stream *s)
{
struct cx18 *cx = s->cx;
- struct cx18_stream *s_vbi;
+ struct cx18_stream *s_assoc;
s->id = -1;
+ if (s->type == CX18_ENC_STREAM_TYPE_IDX) {
+ /*
+ * The IDX stream is only used internally, and can
+ * only be indirectly unclaimed by unclaiming the MPG stream.
+ */
+ return;
+ }
+
if (s->type == CX18_ENC_STREAM_TYPE_VBI &&
test_bit(CX18_F_S_INTERNAL_USE, &s->s_flags)) {
/* this stream is still in use internally */
@@ -105,25 +126,36 @@
cx18_flush_queues(s);
- /* CX18_ENC_STREAM_TYPE_MPG needs to release CX18_ENC_STREAM_TYPE_VBI,
- for all other streams we're done */
- if (s->type == CX18_ENC_STREAM_TYPE_MPG)
- s_vbi = &cx->streams[CX18_ENC_STREAM_TYPE_VBI];
- else
+ /*
+ * CX18_ENC_STREAM_TYPE_MPG needs to release the
+ * CX18_ENC_STREAM_TYPE_VBI and/or CX18_ENC_STREAM_TYPE_IDX streams.
+ *
+ * For all other streams we're done.
+ */
+ if (s->type != CX18_ENC_STREAM_TYPE_MPG)
return;
- /* clear internal use flag */
- if (!test_and_clear_bit(CX18_F_S_INTERNAL_USE, &s_vbi->s_flags)) {
- /* was already cleared */
- return;
+ /* Unclaim the associated MPEG Index stream */
+ s_assoc = &cx->streams[CX18_ENC_STREAM_TYPE_IDX];
+ if (test_and_clear_bit(CX18_F_S_INTERNAL_USE, &s_assoc->s_flags)) {
+ clear_bit(CX18_F_S_CLAIMED, &s_assoc->s_flags);
+ cx18_flush_queues(s_assoc);
}
- if (s_vbi->id != -1) {
- /* VBI stream still claimed by a file descriptor */
- return;
+
+ /* Unclaim the associated VBI stream */
+ s_assoc = &cx->streams[CX18_ENC_STREAM_TYPE_VBI];
+ if (test_and_clear_bit(CX18_F_S_INTERNAL_USE, &s_assoc->s_flags)) {
+ if (s_assoc->id == -1) {
+ /*
+ * The VBI stream is not still claimed by a file
+ * descriptor, so completely unclaim it.
+ */
+ clear_bit(CX18_F_S_CLAIMED, &s_assoc->s_flags);
+ cx18_flush_queues(s_assoc);
+ }
}
- clear_bit(CX18_F_S_CLAIMED, &s_vbi->s_flags);
- cx18_flush_queues(s_vbi);
}
+EXPORT_SYMBOL(cx18_release_stream);
static void cx18_dualwatch(struct cx18 *cx)
{
@@ -177,9 +209,7 @@
*err = 0;
while (1) {
if (s->type == CX18_ENC_STREAM_TYPE_MPG) {
- /* Process pending program info updates and pending
- VBI data */
-
+ /* Process pending program updates and VBI data */
if (time_after(jiffies, cx->dualwatch_jiffies + msecs_to_jiffies(1000))) {
cx->dualwatch_jiffies = jiffies;
cx18_dualwatch(cx);
@@ -362,18 +392,6 @@
return len;
}
-/**
- * list_entry_is_past_end - check if a previous loop cursor is off list end
- * @pos: the type * previously used as a loop cursor.
- * @head: the head for your list.
- * @member: the name of the list_struct within the struct.
- *
- * Check if the entry's list_head is the head of the list, thus it's not a
- * real entry but was the loop cursor that walked past the end
- */
-#define list_entry_is_past_end(pos, head, member) \
- (&pos->member == (head))
-
static size_t cx18_copy_mdl_to_user(struct cx18_stream *s,
struct cx18_mdl *mdl, char __user *ubuf, size_t ucount)
{
@@ -498,6 +516,7 @@
struct cx18 *cx = id->cx;
struct cx18_stream *s = &cx->streams[id->type];
struct cx18_stream *s_vbi;
+ struct cx18_stream *s_idx;
if (s->type == CX18_ENC_STREAM_TYPE_RAD) {
/* you cannot read from these stream types. */
@@ -516,25 +535,33 @@
return 0;
}
- /* Start VBI capture if required */
+ /* Start associated VBI or IDX stream capture if required */
s_vbi = &cx->streams[CX18_ENC_STREAM_TYPE_VBI];
- if (s->type == CX18_ENC_STREAM_TYPE_MPG &&
- test_bit(CX18_F_S_INTERNAL_USE, &s_vbi->s_flags) &&
- !test_and_set_bit(CX18_F_S_STREAMING, &s_vbi->s_flags)) {
- /* Note: the CX18_ENC_STREAM_TYPE_VBI is claimed
- automatically when the MPG stream is claimed.
- We only need to start the VBI capturing. */
- if (cx18_start_v4l2_encode_stream(s_vbi)) {
- CX18_DEBUG_WARN("VBI capture start failed\n");
-
- /* Failure, clean up and return an error */
- clear_bit(CX18_F_S_STREAMING, &s_vbi->s_flags);
- clear_bit(CX18_F_S_STREAMING, &s->s_flags);
- /* also releases the associated VBI stream */
- cx18_release_stream(s);
- return -EIO;
+ s_idx = &cx->streams[CX18_ENC_STREAM_TYPE_IDX];
+ if (s->type == CX18_ENC_STREAM_TYPE_MPG) {
+ /*
+ * The VBI and IDX streams should have been claimed
+ * automatically, if for internal use, when the MPG stream was
+ * claimed. We only need to start these streams capturing.
+ */
+ if (test_bit(CX18_F_S_INTERNAL_USE, &s_idx->s_flags) &&
+ !test_and_set_bit(CX18_F_S_STREAMING, &s_idx->s_flags)) {
+ if (cx18_start_v4l2_encode_stream(s_idx)) {
+ CX18_DEBUG_WARN("IDX capture start failed\n");
+ clear_bit(CX18_F_S_STREAMING, &s_idx->s_flags);
+ goto start_failed;
+ }
+ CX18_DEBUG_INFO("IDX capture started\n");
}
- CX18_DEBUG_INFO("VBI insertion started\n");
+ if (test_bit(CX18_F_S_INTERNAL_USE, &s_vbi->s_flags) &&
+ !test_and_set_bit(CX18_F_S_STREAMING, &s_vbi->s_flags)) {
+ if (cx18_start_v4l2_encode_stream(s_vbi)) {
+ CX18_DEBUG_WARN("VBI capture start failed\n");
+ clear_bit(CX18_F_S_STREAMING, &s_vbi->s_flags);
+ goto start_failed;
+ }
+ CX18_DEBUG_INFO("VBI insertion started\n");
+ }
}
/* Tell the card to start capturing */
@@ -547,19 +574,29 @@
return 0;
}
- /* failure, clean up */
+start_failed:
CX18_DEBUG_WARN("Failed to start capturing for stream %s\n", s->name);
- /* Note: the CX18_ENC_STREAM_TYPE_VBI is released
- automatically when the MPG stream is released.
- We only need to stop the VBI capturing. */
- if (s->type == CX18_ENC_STREAM_TYPE_MPG &&
- test_bit(CX18_F_S_STREAMING, &s_vbi->s_flags)) {
- cx18_stop_v4l2_encode_stream(s_vbi, 0);
- clear_bit(CX18_F_S_STREAMING, &s_vbi->s_flags);
+ /*
+ * The associated VBI and IDX streams for internal use are released
+ * automatically when the MPG stream is released. We only need to stop
+ * the associated stream.
+ */
+ if (s->type == CX18_ENC_STREAM_TYPE_MPG) {
+ /* Stop the IDX stream which is always for internal use */
+ if (test_bit(CX18_F_S_STREAMING, &s_idx->s_flags)) {
+ cx18_stop_v4l2_encode_stream(s_idx, 0);
+ clear_bit(CX18_F_S_STREAMING, &s_idx->s_flags);
+ }
+ /* Stop the VBI stream, if only running for internal use */
+ if (test_bit(CX18_F_S_STREAMING, &s_vbi->s_flags) &&
+ !test_bit(CX18_F_S_APPL_IO, &s_vbi->s_flags)) {
+ cx18_stop_v4l2_encode_stream(s_vbi, 0);
+ clear_bit(CX18_F_S_STREAMING, &s_vbi->s_flags);
+ }
}
clear_bit(CX18_F_S_STREAMING, &s->s_flags);
- cx18_release_stream(s);
+ cx18_release_stream(s); /* Also releases associated streams */
return -EIO;
}
@@ -618,6 +655,8 @@
{
struct cx18 *cx = id->cx;
struct cx18_stream *s = &cx->streams[id->type];
+ struct cx18_stream *s_vbi = &cx->streams[CX18_ENC_STREAM_TYPE_VBI];
+ struct cx18_stream *s_idx = &cx->streams[CX18_ENC_STREAM_TYPE_IDX];
CX18_DEBUG_IOCTL("close() of %s\n", s->name);
@@ -625,17 +664,19 @@
/* Stop capturing */
if (test_bit(CX18_F_S_STREAMING, &s->s_flags)) {
- struct cx18_stream *s_vbi =
- &cx->streams[CX18_ENC_STREAM_TYPE_VBI];
-
CX18_DEBUG_INFO("close stopping capture\n");
- /* Special case: a running VBI capture for VBI insertion
- in the mpeg stream. Need to stop that too. */
- if (id->type == CX18_ENC_STREAM_TYPE_MPG &&
- test_bit(CX18_F_S_STREAMING, &s_vbi->s_flags) &&
- !test_bit(CX18_F_S_APPL_IO, &s_vbi->s_flags)) {
- CX18_DEBUG_INFO("close stopping embedded VBI capture\n");
- cx18_stop_v4l2_encode_stream(s_vbi, 0);
+ if (id->type == CX18_ENC_STREAM_TYPE_MPG) {
+ /* Stop internal use associated VBI and IDX streams */
+ if (test_bit(CX18_F_S_STREAMING, &s_vbi->s_flags) &&
+ !test_bit(CX18_F_S_APPL_IO, &s_vbi->s_flags)) {
+ CX18_DEBUG_INFO("close stopping embedded VBI "
+ "capture\n");
+ cx18_stop_v4l2_encode_stream(s_vbi, 0);
+ }
+ if (test_bit(CX18_F_S_STREAMING, &s_idx->s_flags)) {
+ CX18_DEBUG_INFO("close stopping IDX capture\n");
+ cx18_stop_v4l2_encode_stream(s_idx, 0);
+ }
}
if (id->type == CX18_ENC_STREAM_TYPE_VBI &&
test_bit(CX18_F_S_INTERNAL_USE, &s->s_flags))
diff --git a/drivers/media/video/cx18/cx18-fileops.h b/drivers/media/video/cx18/cx18-fileops.h
index 92e2d5d..5c8fcb8 100644
--- a/drivers/media/video/cx18/cx18-fileops.h
+++ b/drivers/media/video/cx18/cx18-fileops.h
@@ -34,3 +34,6 @@
void cx18_mute(struct cx18 *cx);
void cx18_unmute(struct cx18 *cx);
+/* Shared with cx18-alsa module */
+int cx18_claim_stream(struct cx18_open_id *id, int type);
+void cx18_release_stream(struct cx18_stream *s);
diff --git a/drivers/media/video/cx18/cx18-ioctl.c b/drivers/media/video/cx18/cx18-ioctl.c
index 3e4fc19..b81dd0e 100644
--- a/drivers/media/video/cx18/cx18-ioctl.c
+++ b/drivers/media/video/cx18/cx18-ioctl.c
@@ -775,10 +775,143 @@
return 0;
}
+static int _cx18_process_idx_data(struct cx18_buffer *buf,
+ struct v4l2_enc_idx *idx)
+{
+ int consumed, remaining;
+ struct v4l2_enc_idx_entry *e_idx;
+ struct cx18_enc_idx_entry *e_buf;
+
+ /* Frame type lookup: 1=I, 2=P, 4=B */
+ const int mapping[8] = {
+ -1, V4L2_ENC_IDX_FRAME_I, V4L2_ENC_IDX_FRAME_P,
+ -1, V4L2_ENC_IDX_FRAME_B, -1, -1, -1
+ };
+
+ /*
+ * Assumption here is that a buf holds an integral number of
+ * struct cx18_enc_idx_entry objects and is properly aligned.
+ * This is enforced by the module options on IDX buffer sizes.
+ */
+ remaining = buf->bytesused - buf->readpos;
+ consumed = 0;
+ e_idx = &idx->entry[idx->entries];
+ e_buf = (struct cx18_enc_idx_entry *) &buf->buf[buf->readpos];
+
+ while (remaining >= sizeof(struct cx18_enc_idx_entry) &&
+ idx->entries < V4L2_ENC_IDX_ENTRIES) {
+
+ e_idx->offset = (((u64) le32_to_cpu(e_buf->offset_high)) << 32)
+ | le32_to_cpu(e_buf->offset_low);
+
+ e_idx->pts = (((u64) (le32_to_cpu(e_buf->pts_high) & 1)) << 32)
+ | le32_to_cpu(e_buf->pts_low);
+
+ e_idx->length = le32_to_cpu(e_buf->length);
+
+ e_idx->flags = mapping[le32_to_cpu(e_buf->flags) & 0x7];
+
+ e_idx->reserved[0] = 0;
+ e_idx->reserved[1] = 0;
+
+ idx->entries++;
+ e_idx = &idx->entry[idx->entries];
+ e_buf++;
+
+ remaining -= sizeof(struct cx18_enc_idx_entry);
+ consumed += sizeof(struct cx18_enc_idx_entry);
+ }
+
+ /* Swallow any partial entries at the end, if there are any */
+ if (remaining > 0 && remaining < sizeof(struct cx18_enc_idx_entry))
+ consumed += remaining;
+
+ buf->readpos += consumed;
+ return consumed;
+}
+
+static int cx18_process_idx_data(struct cx18_stream *s, struct cx18_mdl *mdl,
+ struct v4l2_enc_idx *idx)
+{
+ if (s->type != CX18_ENC_STREAM_TYPE_IDX)
+ return -EINVAL;
+
+ if (mdl->curr_buf == NULL)
+ mdl->curr_buf = list_first_entry(&mdl->buf_list,
+ struct cx18_buffer, list);
+
+ if (list_entry_is_past_end(mdl->curr_buf, &mdl->buf_list, list)) {
+ /*
+ * For some reason we've exhausted the buffers, but the MDL
+ * object still said some data was unread.
+ * Fix that and bail out.
+ */
+ mdl->readpos = mdl->bytesused;
+ return 0;
+ }
+
+ list_for_each_entry_from(mdl->curr_buf, &mdl->buf_list, list) {
+
+ /* Skip any empty buffers in the MDL */
+ if (mdl->curr_buf->readpos >= mdl->curr_buf->bytesused)
+ continue;
+
+ mdl->readpos += _cx18_process_idx_data(mdl->curr_buf, idx);
+
+ /* exit when MDL drained or request satisfied */
+ if (idx->entries >= V4L2_ENC_IDX_ENTRIES ||
+ mdl->curr_buf->readpos < mdl->curr_buf->bytesused ||
+ mdl->readpos >= mdl->bytesused)
+ break;
+ }
+ return 0;
+}
+
static int cx18_g_enc_index(struct file *file, void *fh,
struct v4l2_enc_idx *idx)
{
- return -EINVAL;
+ struct cx18 *cx = ((struct cx18_open_id *)fh)->cx;
+ struct cx18_stream *s = &cx->streams[CX18_ENC_STREAM_TYPE_IDX];
+ s32 tmp;
+ struct cx18_mdl *mdl;
+
+ if (!cx18_stream_enabled(s)) /* Module options inhibited IDX stream */
+ return -EINVAL;
+
+ /* Compute the best case number of entries we can buffer */
+ tmp = s->buffers -
+ s->bufs_per_mdl * CX18_ENC_STREAM_TYPE_IDX_FW_MDL_MIN;
+ if (tmp <= 0)
+ tmp = 1;
+ tmp = tmp * s->buf_size / sizeof(struct cx18_enc_idx_entry);
+
+ /* Fill out the header of the return structure */
+ idx->entries = 0;
+ idx->entries_cap = tmp;
+ memset(idx->reserved, 0, sizeof(idx->reserved));
+
+ /* Pull IDX MDLs and buffers from q_full and populate the entries */
+ do {
+ mdl = cx18_dequeue(s, &s->q_full);
+ if (mdl == NULL) /* No more IDX data right now */
+ break;
+
+ /* Extract the Index entry data from the MDL and buffers */
+ cx18_process_idx_data(s, mdl, idx);
+ if (mdl->readpos < mdl->bytesused) {
+ /* We finished with data remaining, push the MDL back */
+ cx18_push(s, mdl, &s->q_full);
+ break;
+ }
+
+ /* We drained this MDL, schedule it to go to the firmware */
+ cx18_enqueue(s, mdl, &s->q_free);
+
+ } while (idx->entries < V4L2_ENC_IDX_ENTRIES);
+
+ /* Tell the work handler to send free IDX MDLs to the firmware */
+ cx18_stream_load_fw_queue(s);
+ return 0;
}
static int cx18_encoder_cmd(struct file *file, void *fh,
diff --git a/drivers/media/video/cx18/cx18-mailbox.c b/drivers/media/video/cx18/cx18-mailbox.c
index f231dd0..6dcce29 100644
--- a/drivers/media/video/cx18/cx18-mailbox.c
+++ b/drivers/media/video/cx18/cx18-mailbox.c
@@ -29,6 +29,7 @@
#include "cx18-mailbox.h"
#include "cx18-queue.h"
#include "cx18-streams.h"
+#include "cx18-alsa-pcm.h" /* FIXME make configurable */
static const char *rpu_str[] = { "APU", "CPU", "EPU", "HPU" };
@@ -157,6 +158,34 @@
}
}
+
+static void cx18_mdl_send_to_alsa(struct cx18 *cx, struct cx18_stream *s,
+ struct cx18_mdl *mdl)
+{
+ struct cx18_buffer *buf;
+
+ if (mdl->bytesused == 0)
+ return;
+
+ /* We ignore mdl and buf readpos accounting here - it doesn't matter */
+
+ /* The likely case */
+ if (list_is_singular(&mdl->buf_list)) {
+ buf = list_first_entry(&mdl->buf_list, struct cx18_buffer,
+ list);
+ if (buf->bytesused)
+ cx->pcm_announce_callback(cx->alsa, buf->buf,
+ buf->bytesused);
+ return;
+ }
+
+ list_for_each_entry(buf, &mdl->buf_list, list) {
+ if (buf->bytesused == 0)
+ break;
+ cx->pcm_announce_callback(cx->alsa, buf->buf, buf->bytesused);
+ }
+}
+
static void epu_dma_done(struct cx18 *cx, struct cx18_in_work_order *order)
{
u32 handle, mdl_ack_count, id;
@@ -223,11 +252,21 @@
CX18_DEBUG_HI_DMA("%s recv bytesused = %d\n",
s->name, mdl->bytesused);
- if (s->type != CX18_ENC_STREAM_TYPE_TS)
- cx18_enqueue(s, mdl, &s->q_full);
- else {
+ if (s->type == CX18_ENC_STREAM_TYPE_TS) {
cx18_mdl_send_to_dvb(s, mdl);
cx18_enqueue(s, mdl, &s->q_free);
+ } else if (s->type == CX18_ENC_STREAM_TYPE_PCM) {
+ /* Pass the data to cx18-alsa */
+ if (cx->pcm_announce_callback != NULL) {
+ cx18_mdl_send_to_alsa(cx, s, mdl);
+ cx18_enqueue(s, mdl, &s->q_free);
+ } else {
+ cx18_enqueue(s, mdl, &s->q_full);
+ }
+ } else {
+ cx18_enqueue(s, mdl, &s->q_full);
+ if (s->type == CX18_ENC_STREAM_TYPE_IDX)
+ cx18_stream_rotate_idx_mdls(cx);
}
}
/* Put as many MDLs as possible back into fw use */
diff --git a/drivers/media/video/cx18/cx18-queue.c b/drivers/media/video/cx18/cx18-queue.c
index 6330482..aefc8c8 100644
--- a/drivers/media/video/cx18/cx18-queue.c
+++ b/drivers/media/video/cx18/cx18-queue.c
@@ -419,6 +419,9 @@
{
struct cx18_mdl *mdl;
struct cx18_buffer *buf;
+ struct cx18 *cx = s->cx;
+
+ CX18_DEBUG_INFO("Deallocating buffers for %s stream\n", s->name);
/* move all buffers to buf_pool and all MDLs to q_idle */
cx18_unload_queues(s);
diff --git a/drivers/media/video/cx18/cx18-streams.c b/drivers/media/video/cx18/cx18-streams.c
index 987a930..054450f 100644
--- a/drivers/media/video/cx18/cx18-streams.c
+++ b/drivers/media/video/cx18/cx18-streams.c
@@ -319,11 +319,27 @@
/* Teardown all streams */
for (type = 0; type < CX18_MAX_STREAMS; type++) {
- if (cx->streams[type].dvb.enabled) {
- cx18_dvb_unregister(&cx->streams[type]);
- cx->streams[type].dvb.enabled = false;
+
+ /* No struct video_device, but can have buffers allocated */
+ if (type == CX18_ENC_STREAM_TYPE_TS) {
+ if (cx->streams[type].dvb.enabled) {
+ cx18_dvb_unregister(&cx->streams[type]);
+ cx->streams[type].dvb.enabled = false;
+ cx18_stream_free(&cx->streams[type]);
+ }
+ continue;
}
+ /* No struct video_device, but can have buffers allocated */
+ if (type == CX18_ENC_STREAM_TYPE_IDX) {
+ if (cx->stream_buffers[type] != 0) {
+ cx->stream_buffers[type] = 0;
+ cx18_stream_free(&cx->streams[type]);
+ }
+ continue;
+ }
+
+ /* If struct video_device exists, can have buffers allocated */
vdev = cx->streams[type].video_dev;
cx->streams[type].video_dev = NULL;
@@ -447,6 +463,32 @@
cx18_api(cx, CX18_CPU_SET_RAW_VBI_PARAM, 6, data);
}
+void cx18_stream_rotate_idx_mdls(struct cx18 *cx)
+{
+ struct cx18_stream *s = &cx->streams[CX18_ENC_STREAM_TYPE_IDX];
+ struct cx18_mdl *mdl;
+
+ if (!cx18_stream_enabled(s))
+ return;
+
+ /* Return if the firmware is not running low on MDLs */
+ if ((atomic_read(&s->q_free.depth) + atomic_read(&s->q_busy.depth)) >=
+ CX18_ENC_STREAM_TYPE_IDX_FW_MDL_MIN)
+ return;
+
+ /* Return if there are no MDLs to rotate back to the firmware */
+ if (atomic_read(&s->q_full.depth) < 2)
+ return;
+
+ /*
+ * Take the oldest IDX MDL still holding data, and discard its index
+ * entries by scheduling the MDL to go back to the firmware
+ */
+ mdl = cx18_dequeue(s, &s->q_full);
+ if (mdl != NULL)
+ cx18_enqueue(s, mdl, &s->q_free);
+}
+
static
struct cx18_queue *_cx18_stream_put_mdl_fw(struct cx18_stream *s,
struct cx18_mdl *mdl)
@@ -546,8 +588,9 @@
struct cx18 *cx = s->cx;
int captype = 0;
struct cx18_api_func_private priv;
+ struct cx18_stream *s_idx;
- if (s->video_dev == NULL && s->dvb.enabled == 0)
+ if (!cx18_stream_enabled(s))
return -EINVAL;
CX18_DEBUG_INFO("Start encoder stream %s\n", s->name);
@@ -561,6 +604,9 @@
cx->search_pack_header = 0;
break;
+ case CX18_ENC_STREAM_TYPE_IDX:
+ captype = CAPTURE_CHANNEL_TYPE_INDEX;
+ break;
case CX18_ENC_STREAM_TYPE_TS:
captype = CAPTURE_CHANNEL_TYPE_TS;
break;
@@ -635,11 +681,13 @@
cx18_vbi_setup(s);
/*
- * assign program index info.
- * Mask 7: select I/P/B, Num_req: 400 max
- * FIXME - currently we have this hardcoded as disabled
+ * Select to receive I, P, and B frame index entries, if the
+ * index stream is enabled. Otherwise disable index entry
+ * generation.
*/
- cx18_vapi_result(cx, data, CX18_CPU_SET_INDEXTABLE, 1, 0);
+ s_idx = &cx->streams[CX18_ENC_STREAM_TYPE_IDX];
+ cx18_vapi_result(cx, data, CX18_CPU_SET_INDEXTABLE, 2,
+ s->handle, cx18_stream_enabled(s_idx) ? 7 : 0);
/* Call out to the common CX2341x API setup for user controls */
priv.cx = cx;
@@ -697,6 +745,7 @@
atomic_inc(&cx->tot_capturing);
return 0;
}
+EXPORT_SYMBOL(cx18_start_v4l2_encode_stream);
void cx18_stop_all_captures(struct cx18 *cx)
{
@@ -705,7 +754,7 @@
for (i = CX18_MAX_STREAMS - 1; i >= 0; i--) {
struct cx18_stream *s = &cx->streams[i];
- if (s->video_dev == NULL && s->dvb.enabled == 0)
+ if (!cx18_stream_enabled(s))
continue;
if (test_bit(CX18_F_S_STREAMING, &s->s_flags))
cx18_stop_v4l2_encode_stream(s, 0);
@@ -717,7 +766,7 @@
struct cx18 *cx = s->cx;
unsigned long then;
- if (s->video_dev == NULL && s->dvb.enabled == 0)
+ if (!cx18_stream_enabled(s))
return -EINVAL;
/* This function assumes that you are allowed to stop the capture
@@ -762,6 +811,7 @@
return 0;
}
+EXPORT_SYMBOL(cx18_stop_v4l2_encode_stream);
u32 cx18_find_handle(struct cx18 *cx)
{
@@ -789,7 +839,7 @@
s = &cx->streams[i];
if (s->handle != handle)
continue;
- if (s->video_dev || s->dvb.enabled)
+ if (cx18_stream_enabled(s))
return s;
}
return NULL;
diff --git a/drivers/media/video/cx18/cx18-streams.h b/drivers/media/video/cx18/cx18-streams.h
index 4a01db5..0bff0fa 100644
--- a/drivers/media/video/cx18/cx18-streams.h
+++ b/drivers/media/video/cx18/cx18-streams.h
@@ -28,6 +28,16 @@
int cx18_streams_register(struct cx18 *cx);
void cx18_streams_cleanup(struct cx18 *cx, int unregister);
+#define CX18_ENC_STREAM_TYPE_IDX_FW_MDL_MIN (3)
+void cx18_stream_rotate_idx_mdls(struct cx18 *cx);
+
+static inline bool cx18_stream_enabled(struct cx18_stream *s)
+{
+ return s->video_dev || s->dvb.enabled ||
+ (s->type == CX18_ENC_STREAM_TYPE_IDX &&
+ s->cx->stream_buffers[CX18_ENC_STREAM_TYPE_IDX] != 0);
+}
+
/* Related to submission of mdls to firmware */
static inline void cx18_stream_load_fw_queue(struct cx18_stream *s)
{
diff --git a/drivers/media/video/cx18/cx18-version.h b/drivers/media/video/cx18/cx18-version.h
index 9c0b5bb..3e1aec4b 100644
--- a/drivers/media/video/cx18/cx18-version.h
+++ b/drivers/media/video/cx18/cx18-version.h
@@ -24,7 +24,7 @@
#define CX18_DRIVER_NAME "cx18"
#define CX18_DRIVER_VERSION_MAJOR 1
-#define CX18_DRIVER_VERSION_MINOR 3
+#define CX18_DRIVER_VERSION_MINOR 4
#define CX18_DRIVER_VERSION_PATCHLEVEL 0
#define CX18_VERSION __stringify(CX18_DRIVER_VERSION_MAJOR) "." __stringify(CX18_DRIVER_VERSION_MINOR) "." __stringify(CX18_DRIVER_VERSION_PATCHLEVEL)
diff --git a/drivers/media/video/cx18/cx23418.h b/drivers/media/video/cx18/cx23418.h
index 868806e..2c00980 100644
--- a/drivers/media/video/cx18/cx23418.h
+++ b/drivers/media/video/cx18/cx23418.h
@@ -191,7 +191,8 @@
#define CX18_CPU_SET_MEDIAN_CORING (CPU_CMD_MASK_CAPTURE | 0x000E)
/* Description: This command set the picture type mask for index file
- IN[0] - 0 = disable index file output
+ IN[0] - Task handle (ignored by firmware)
+ IN[1] - 0 = disable index file output
1 = output I picture
2 = P picture
4 = B picture
diff --git a/drivers/media/video/cx231xx/cx231xx-dvb.c b/drivers/media/video/cx231xx/cx231xx-dvb.c
index c5082a4..64e025e 100644
--- a/drivers/media/video/cx231xx/cx231xx-dvb.c
+++ b/drivers/media/video/cx231xx/cx231xx-dvb.c
@@ -464,9 +464,9 @@
/* define general-purpose callback pointer */
dvb->frontend->callback = cx231xx_tuner_callback;
- if (dvb_attach(xc5000_attach, dev->dvb->frontend,
+ if (!dvb_attach(xc5000_attach, dev->dvb->frontend,
&dev->i2c_bus[1].i2c_adap,
- &cnxt_rde250_tunerconfig) < 0) {
+ &cnxt_rde250_tunerconfig)) {
result = -EINVAL;
goto out_free;
}
@@ -486,9 +486,9 @@
/* define general-purpose callback pointer */
dvb->frontend->callback = cx231xx_tuner_callback;
- if (dvb_attach(xc5000_attach, dev->dvb->frontend,
+ if (!dvb_attach(xc5000_attach, dev->dvb->frontend,
&dev->i2c_bus[1].i2c_adap,
- &cnxt_rde250_tunerconfig) < 0) {
+ &cnxt_rde250_tunerconfig)) {
result = -EINVAL;
goto out_free;
}
diff --git a/drivers/media/video/cx231xx/cx231xx-input.c b/drivers/media/video/cx231xx/cx231xx-input.c
index 15826f9..c5771db 100644
--- a/drivers/media/video/cx231xx/cx231xx-input.c
+++ b/drivers/media/video/cx231xx/cx231xx-input.c
@@ -216,7 +216,7 @@
cx231xx_ir_start(ir);
/* all done */
- err = ir_input_register(ir->input, dev->board.ir_codes);
+ err = ir_input_register(ir->input, dev->board.ir_codes, NULL);
if (err)
goto err_out_stop;
diff --git a/drivers/media/video/cx23885/cx23885-417.c b/drivers/media/video/cx23885/cx23885-417.c
index 88c0d24..2ab97ad 100644
--- a/drivers/media/video/cx23885/cx23885-417.c
+++ b/drivers/media/video/cx23885/cx23885-417.c
@@ -681,7 +681,7 @@
case CX2341X_ENC_SET_VIDEO_ID:
return "SET_VIDEO_ID";
case CX2341X_ENC_SET_PCR_ID:
- return "SET_PCR_PID";
+ return "SET_PCR_ID";
case CX2341X_ENC_SET_FRAME_RATE:
return "SET_FRAME_RATE";
case CX2341X_ENC_SET_FRAME_SIZE:
@@ -693,7 +693,7 @@
case CX2341X_ENC_SET_ASPECT_RATIO:
return "SET_ASPECT_RATIO";
case CX2341X_ENC_SET_DNR_FILTER_MODE:
- return "SET_DNR_FILTER_PROPS";
+ return "SET_DNR_FILTER_MODE";
case CX2341X_ENC_SET_DNR_FILTER_PROPS:
return "SET_DNR_FILTER_PROPS";
case CX2341X_ENC_SET_CORING_LEVELS:
diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c
index 1ec4816..d639186 100644
--- a/drivers/media/video/cx23885/cx23885-cards.c
+++ b/drivers/media/video/cx23885/cx23885-cards.c
@@ -274,6 +274,31 @@
.portb = CX23885_MPEG_DVB,
.portc = CX23885_MPEG_DVB,
},
+ [CX23885_BOARD_LEADTEK_WINFAST_PXTV1200] = {
+ .name = "LEADTEK WinFast PxTV1200",
+ .porta = CX23885_ANALOG_VIDEO,
+ .tuner_type = TUNER_XC2028,
+ .tuner_addr = 0x61,
+ .input = {{
+ .type = CX23885_VMUX_TELEVISION,
+ .vmux = CX25840_VIN2_CH1 |
+ CX25840_VIN5_CH2 |
+ CX25840_NONE0_CH3,
+ }, {
+ .type = CX23885_VMUX_COMPOSITE1,
+ .vmux = CX25840_COMPOSITE1,
+ }, {
+ .type = CX23885_VMUX_SVIDEO,
+ .vmux = CX25840_SVIDEO_LUMA3 |
+ CX25840_SVIDEO_CHROMA4,
+ }, {
+ .type = CX23885_VMUX_COMPONENT,
+ .vmux = CX25840_VIN7_CH1 |
+ CX25840_VIN6_CH2 |
+ CX25840_VIN8_CH3 |
+ CX25840_COMPONENT_ON,
+ } },
+ },
};
const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
@@ -417,6 +442,10 @@
.subvendor = 0x14f1,
.subdevice = 0x8578,
.card = CX23885_BOARD_MYGICA_X8558PRO,
+ }, {
+ .subvendor = 0x107d,
+ .subdevice = 0x6f22,
+ .card = CX23885_BOARD_LEADTEK_WINFAST_PXTV1200,
},
};
const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);
@@ -617,6 +646,7 @@
case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H:
case CX23885_BOARD_COMPRO_VIDEOMATE_E650F:
case CX23885_BOARD_COMPRO_VIDEOMATE_E800:
+ case CX23885_BOARD_LEADTEK_WINFAST_PXTV1200:
/* Tuner Reset Command */
bitmask = 0x04;
break;
@@ -769,6 +799,7 @@
case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H:
case CX23885_BOARD_COMPRO_VIDEOMATE_E650F:
case CX23885_BOARD_COMPRO_VIDEOMATE_E800:
+ case CX23885_BOARD_LEADTEK_WINFAST_PXTV1200:
/* GPIO-2 xc3028 tuner reset */
/* The following GPIO's are on the internal AVCore (cx25840) */
@@ -1076,6 +1107,7 @@
case CX23885_BOARD_MYGICA_X8506:
case CX23885_BOARD_MAGICPRO_PROHDTVE2:
case CX23885_BOARD_HAUPPAUGE_HVR1290:
+ case CX23885_BOARD_LEADTEK_WINFAST_PXTV1200:
dev->sd_cx25840 = v4l2_i2c_new_subdev(&dev->v4l2_dev,
&dev->i2c_bus[2].i2c_adap,
"cx25840", "cx25840", 0x88 >> 1, NULL);
diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c
index e45d2df..939079d 100644
--- a/drivers/media/video/cx23885/cx23885-dvb.c
+++ b/drivers/media/video/cx23885/cx23885-dvb.c
@@ -542,6 +542,9 @@
.osc_clk_freq = 30400, /* in kHz */
.if_freq = 0, /* zero IF */
.zif_swap_iq = 1,
+ .agc_min = 0x2E,
+ .agc_max = 0xFF,
+ .agc_hold_loop = 0,
};
static struct max2165_config mygic_x8558pro_max2165_cfg1 = {
@@ -558,6 +561,9 @@
.osc_clk_freq = 30400, /* in kHz */
.if_freq = 0, /* zero IF */
.zif_swap_iq = 1,
+ .agc_min = 0x2E,
+ .agc_max = 0xFF,
+ .agc_hold_loop = 0,
};
static struct max2165_config mygic_x8558pro_max2165_cfg2 = {
@@ -994,15 +1000,8 @@
netup_get_card_info(&dev->i2c_bus[0].i2c_adap, &cinfo);
memcpy(port->frontends.adapter.proposed_mac,
cinfo.port[port->nr - 1].mac, 6);
- printk(KERN_INFO "NetUP Dual DVB-S2 CI card port%d MAC="
- "%02X:%02X:%02X:%02X:%02X:%02X\n",
- port->nr,
- port->frontends.adapter.proposed_mac[0],
- port->frontends.adapter.proposed_mac[1],
- port->frontends.adapter.proposed_mac[2],
- port->frontends.adapter.proposed_mac[3],
- port->frontends.adapter.proposed_mac[4],
- port->frontends.adapter.proposed_mac[5]);
+ printk(KERN_INFO "NetUP Dual DVB-S2 CI card port%d MAC=%pM\n",
+ port->nr, port->frontends.adapter.proposed_mac);
netup_ci_init(port);
break;
diff --git a/drivers/media/video/cx23885/cx23885-input.c b/drivers/media/video/cx23885/cx23885-input.c
index 768eec9..9c6620f 100644
--- a/drivers/media/video/cx23885/cx23885-input.c
+++ b/drivers/media/video/cx23885/cx23885-input.c
@@ -397,7 +397,7 @@
dev->ir_input = ir;
cx23885_input_ir_start(dev);
- ret = ir_input_register(ir->dev, ir_codes);
+ ret = ir_input_register(ir->dev, ir_codes, NULL);
if (ret)
goto err_out_stop;
diff --git a/drivers/media/video/cx23885/cx23885-video.c b/drivers/media/video/cx23885/cx23885-video.c
index 8934d61..2d3ac8b 100644
--- a/drivers/media/video/cx23885/cx23885-video.c
+++ b/drivers/media/video/cx23885/cx23885-video.c
@@ -36,6 +36,7 @@
#include <media/v4l2-common.h>
#include <media/v4l2-ioctl.h>
#include "cx23885-ioctl.h"
+#include "tuner-xc2028.h"
MODULE_DESCRIPTION("v4l2 driver module for cx23885 based TV cards");
MODULE_AUTHOR("Steven Toth <stoth@linuxtv.org>");
@@ -1505,6 +1506,18 @@
tun_setup.tuner_callback = cx23885_tuner_callback;
v4l2_subdev_call(sd, tuner, s_type_addr, &tun_setup);
+
+ if (dev->board == CX23885_BOARD_LEADTEK_WINFAST_PXTV1200) {
+ struct xc2028_ctrl ctrl = {
+ .fname = XC2028_DEFAULT_FIRMWARE,
+ .max_len = 64
+ };
+ struct v4l2_priv_tun_config cfg = {
+ .tuner = dev->tuner_type,
+ .priv = &ctrl
+ };
+ v4l2_subdev_call(sd, tuner, s_config, &cfg);
+ }
}
}
diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h
index 08b3f6b..0e3a98d2 100644
--- a/drivers/media/video/cx23885/cx23885.h
+++ b/drivers/media/video/cx23885/cx23885.h
@@ -81,6 +81,7 @@
#define CX23885_BOARD_COMPRO_VIDEOMATE_E800 25
#define CX23885_BOARD_HAUPPAUGE_HVR1290 26
#define CX23885_BOARD_MYGICA_X8558PRO 27
+#define CX23885_BOARD_LEADTEK_WINFAST_PXTV1200 28
#define GPIO_0 0x00000001
#define GPIO_1 0x00000002
diff --git a/drivers/media/video/cx25840/cx25840-core.c b/drivers/media/video/cx25840/cx25840-core.c
index 385ecd5..f2461cd 100644
--- a/drivers/media/video/cx25840/cx25840-core.c
+++ b/drivers/media/video/cx25840/cx25840-core.c
@@ -734,10 +734,8 @@
v4l_dbg(1, cx25840_debug, client, "vid_input 0x%x\n",
vid_input);
reg = vid_input & 0xff;
- if ((vid_input & CX25840_SVIDEO_ON) == CX25840_SVIDEO_ON)
- is_composite = 0;
- else if ((vid_input & CX25840_COMPONENT_ON) == 0)
- is_composite = 1;
+ is_composite = !is_component &&
+ ((vid_input & CX25840_SVIDEO_ON) != CX25840_SVIDEO_ON);
v4l_dbg(1, cx25840_debug, client, "mux cfg 0x%x comp=%d\n",
reg, is_composite);
@@ -1347,30 +1345,59 @@
}
#endif
+static int cx25840_s_audio_stream(struct v4l2_subdev *sd, int enable)
+{
+ struct cx25840_state *state = to_state(sd);
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ u8 v;
+
+ if (is_cx2583x(state) || is_cx2388x(state) || is_cx231xx(state))
+ return 0;
+
+ v4l_dbg(1, cx25840_debug, client, "%s audio output\n",
+ enable ? "enable" : "disable");
+
+ if (enable) {
+ v = cx25840_read(client, 0x115) | 0x80;
+ cx25840_write(client, 0x115, v);
+ v = cx25840_read(client, 0x116) | 0x03;
+ cx25840_write(client, 0x116, v);
+ } else {
+ v = cx25840_read(client, 0x115) & ~(0x80);
+ cx25840_write(client, 0x115, v);
+ v = cx25840_read(client, 0x116) & ~(0x03);
+ cx25840_write(client, 0x116, v);
+ }
+ return 0;
+}
+
static int cx25840_s_stream(struct v4l2_subdev *sd, int enable)
{
struct cx25840_state *state = to_state(sd);
struct i2c_client *client = v4l2_get_subdevdata(sd);
+ u8 v;
- v4l_dbg(1, cx25840_debug, client, "%s output\n",
+ v4l_dbg(1, cx25840_debug, client, "%s video output\n",
enable ? "enable" : "disable");
if (enable) {
if (is_cx2388x(state) || is_cx231xx(state)) {
- u8 v = (cx25840_read(client, 0x421) | 0x0b);
+ v = cx25840_read(client, 0x421) | 0x0b;
cx25840_write(client, 0x421, v);
} else {
- cx25840_write(client, 0x115,
- is_cx2583x(state) ? 0x0c : 0x8c);
- cx25840_write(client, 0x116,
- is_cx2583x(state) ? 0x04 : 0x07);
+ v = cx25840_read(client, 0x115) | 0x0c;
+ cx25840_write(client, 0x115, v);
+ v = cx25840_read(client, 0x116) | 0x04;
+ cx25840_write(client, 0x116, v);
}
} else {
if (is_cx2388x(state) || is_cx231xx(state)) {
- u8 v = cx25840_read(client, 0x421) & ~(0x0b);
+ v = cx25840_read(client, 0x421) & ~(0x0b);
cx25840_write(client, 0x421, v);
} else {
- cx25840_write(client, 0x115, 0x00);
- cx25840_write(client, 0x116, 0x00);
+ v = cx25840_read(client, 0x115) & ~(0x0c);
+ cx25840_write(client, 0x115, v);
+ v = cx25840_read(client, 0x116) & ~(0x04);
+ cx25840_write(client, 0x116, v);
}
}
return 0;
@@ -1601,6 +1628,7 @@
static const struct v4l2_subdev_audio_ops cx25840_audio_ops = {
.s_clock_freq = cx25840_s_clock_freq,
.s_routing = cx25840_s_audio_routing,
+ .s_stream = cx25840_s_audio_stream,
};
static const struct v4l2_subdev_video_ops cx25840_video_ops = {
diff --git a/drivers/media/video/cx88/cx88-alsa.c b/drivers/media/video/cx88/cx88-alsa.c
index 5a67445..64b350d 100644
--- a/drivers/media/video/cx88/cx88-alsa.c
+++ b/drivers/media/video/cx88/cx88-alsa.c
@@ -583,16 +583,18 @@
{
snd_cx88_card_t *chip = snd_kcontrol_chip(kcontrol);
struct cx88_core *core=chip->core;
- int v, b;
+ int left, right, v, b;
int changed = 0;
u32 old;
- b = value->value.integer.value[1] - value->value.integer.value[0];
+ left = value->value.integer.value[0] & 0x3f;
+ right = value->value.integer.value[1] & 0x3f;
+ b = right - left;
if (b < 0) {
- v = 0x3f - value->value.integer.value[0];
+ v = 0x3f - left;
b = (-b) | 0x40;
} else {
- v = 0x3f - value->value.integer.value[1];
+ v = 0x3f - right;
}
/* Do we really know this will always be called with IRQs on? */
spin_lock_irq(&chip->reg_lock);
diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c
index d844f2a..eaf0ee7d 100644
--- a/drivers/media/video/cx88/cx88-cards.c
+++ b/drivers/media/video/cx88/cx88-cards.c
@@ -1466,6 +1466,18 @@
.audioroute = 8,
},
},
+ [CX88_BOARD_SAMSUNG_SMT_7020] = {
+ .name = "Samsung SMT 7020 DVB-S",
+ .tuner_type = TUNER_ABSENT,
+ .radio_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .radio_addr = ADDR_UNSET,
+ .input = { {
+ .type = CX88_VMUX_DVB,
+ .vmux = 0,
+ } },
+ .mpeg = CX88_MPEG_DVB,
+ },
[CX88_BOARD_ADSTECH_PTV_390] = {
.name = "ADS Tech Instant Video PCI",
.tuner_type = TUNER_ABSENT,
@@ -2355,6 +2367,14 @@
.subvendor = 0x0070,
.subdevice = 0x1404,
.card = CX88_BOARD_HAUPPAUGE_HVR3000,
+ }, {
+ .subvendor = 0x18ac,
+ .subdevice = 0xdc00,
+ .card = CX88_BOARD_SAMSUNG_SMT_7020,
+ }, {
+ .subvendor = 0x18ac,
+ .subdevice = 0xdccd,
+ .card = CX88_BOARD_SAMSUNG_SMT_7020,
},{
.subvendor = 0x1461,
.subdevice = 0xc111, /* AverMedia M150-D */
@@ -2633,6 +2653,9 @@
case 98559: /* WinTV-HVR1100LP (Video no IR, Retail - Low Profile) */
/* known */
break;
+ case CX88_BOARD_SAMSUNG_SMT_7020:
+ cx_set(MO_GP0_IO, 0x008989FF);
+ break;
default:
warn_printk(core, "warning: unknown hauppauge model #%d\n",
tv.model);
diff --git a/drivers/media/video/cx88/cx88-dvb.c b/drivers/media/video/cx88/cx88-dvb.c
index b142969..94ab862 100644
--- a/drivers/media/video/cx88/cx88-dvb.c
+++ b/drivers/media/video/cx88/cx88-dvb.c
@@ -674,6 +674,194 @@
return 0;
}
+
+
+static u8 samsung_smt_7020_inittab[] = {
+ 0x01, 0x15,
+ 0x02, 0x00,
+ 0x03, 0x00,
+ 0x04, 0x7D,
+ 0x05, 0x0F,
+ 0x06, 0x02,
+ 0x07, 0x00,
+ 0x08, 0x60,
+
+ 0x0A, 0xC2,
+ 0x0B, 0x00,
+ 0x0C, 0x01,
+ 0x0D, 0x81,
+ 0x0E, 0x44,
+ 0x0F, 0x09,
+ 0x10, 0x3C,
+ 0x11, 0x84,
+ 0x12, 0xDA,
+ 0x13, 0x99,
+ 0x14, 0x8D,
+ 0x15, 0xCE,
+ 0x16, 0xE8,
+ 0x17, 0x43,
+ 0x18, 0x1C,
+ 0x19, 0x1B,
+ 0x1A, 0x1D,
+
+ 0x1C, 0x12,
+ 0x1D, 0x00,
+ 0x1E, 0x00,
+ 0x1F, 0x00,
+ 0x20, 0x00,
+ 0x21, 0x00,
+ 0x22, 0x00,
+ 0x23, 0x00,
+
+ 0x28, 0x02,
+ 0x29, 0x28,
+ 0x2A, 0x14,
+ 0x2B, 0x0F,
+ 0x2C, 0x09,
+ 0x2D, 0x05,
+
+ 0x31, 0x1F,
+ 0x32, 0x19,
+ 0x33, 0xFC,
+ 0x34, 0x13,
+ 0xff, 0xff,
+};
+
+
+static int samsung_smt_7020_tuner_set_params(struct dvb_frontend *fe,
+ struct dvb_frontend_parameters *params)
+{
+ struct cx8802_dev *dev = fe->dvb->priv;
+ u8 buf[4];
+ u32 div;
+ struct i2c_msg msg = {
+ .addr = 0x61,
+ .flags = 0,
+ .buf = buf,
+ .len = sizeof(buf) };
+
+ div = params->frequency / 125;
+
+ buf[0] = (div >> 8) & 0x7f;
+ buf[1] = div & 0xff;
+ buf[2] = 0x84; /* 0xC4 */
+ buf[3] = 0x00;
+
+ if (params->frequency < 1500000)
+ buf[3] |= 0x10;
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+
+ if (i2c_transfer(&dev->core->i2c_adap, &msg, 1) != 1)
+ return -EIO;
+
+ return 0;
+}
+
+static int samsung_smt_7020_set_tone(struct dvb_frontend *fe,
+ fe_sec_tone_mode_t tone)
+{
+ struct cx8802_dev *dev = fe->dvb->priv;
+ struct cx88_core *core = dev->core;
+
+ cx_set(MO_GP0_IO, 0x0800);
+
+ switch (tone) {
+ case SEC_TONE_ON:
+ cx_set(MO_GP0_IO, 0x08);
+ break;
+ case SEC_TONE_OFF:
+ cx_clear(MO_GP0_IO, 0x08);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int samsung_smt_7020_set_voltage(struct dvb_frontend *fe,
+ fe_sec_voltage_t voltage)
+{
+ struct cx8802_dev *dev = fe->dvb->priv;
+ struct cx88_core *core = dev->core;
+
+ u8 data;
+ struct i2c_msg msg = {
+ .addr = 8,
+ .flags = 0,
+ .buf = &data,
+ .len = sizeof(data) };
+
+ cx_set(MO_GP0_IO, 0x8000);
+
+ switch (voltage) {
+ case SEC_VOLTAGE_OFF:
+ break;
+ case SEC_VOLTAGE_13:
+ data = ISL6421_EN1 | ISL6421_LLC1;
+ cx_clear(MO_GP0_IO, 0x80);
+ break;
+ case SEC_VOLTAGE_18:
+ data = ISL6421_EN1 | ISL6421_LLC1 | ISL6421_VSEL1;
+ cx_clear(MO_GP0_IO, 0x80);
+ break;
+ default:
+ return -EINVAL;
+ };
+
+ return (i2c_transfer(&dev->core->i2c_adap, &msg, 1) == 1) ? 0 : -EIO;
+}
+
+static int samsung_smt_7020_stv0299_set_symbol_rate(struct dvb_frontend *fe,
+ u32 srate, u32 ratio)
+{
+ u8 aclk = 0;
+ u8 bclk = 0;
+
+ if (srate < 1500000) {
+ aclk = 0xb7;
+ bclk = 0x47;
+ } else if (srate < 3000000) {
+ aclk = 0xb7;
+ bclk = 0x4b;
+ } else if (srate < 7000000) {
+ aclk = 0xb7;
+ bclk = 0x4f;
+ } else if (srate < 14000000) {
+ aclk = 0xb7;
+ bclk = 0x53;
+ } else if (srate < 30000000) {
+ aclk = 0xb6;
+ bclk = 0x53;
+ } else if (srate < 45000000) {
+ aclk = 0xb4;
+ bclk = 0x51;
+ }
+
+ stv0299_writereg(fe, 0x13, aclk);
+ stv0299_writereg(fe, 0x14, bclk);
+ stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff);
+ stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff);
+ stv0299_writereg(fe, 0x21, ratio & 0xf0);
+
+ return 0;
+}
+
+
+static struct stv0299_config samsung_stv0299_config = {
+ .demod_address = 0x68,
+ .inittab = samsung_smt_7020_inittab,
+ .mclk = 88000000UL,
+ .invert = 0,
+ .skip_reinit = 0,
+ .lock_output = STV0299_LOCKOUTPUT_LK,
+ .volt13_op0_op1 = STV0299_VOLT13_OP1,
+ .min_delay_ms = 100,
+ .set_symbol_rate = samsung_smt_7020_stv0299_set_symbol_rate,
+};
+
static int dvb_register(struct cx8802_dev *dev)
{
struct cx88_core *core = dev->core;
@@ -1203,6 +1391,32 @@
}
break;
}
+ case CX88_BOARD_SAMSUNG_SMT_7020:
+ dev->ts_gen_cntrl = 0x08;
+
+ cx_set(MO_GP0_IO, 0x0101);
+
+ cx_clear(MO_GP0_IO, 0x01);
+ mdelay(100);
+ cx_set(MO_GP0_IO, 0x01);
+ mdelay(200);
+
+ fe0->dvb.frontend = dvb_attach(stv0299_attach,
+ &samsung_stv0299_config,
+ &dev->core->i2c_adap);
+ if (fe0->dvb.frontend) {
+ fe0->dvb.frontend->ops.tuner_ops.set_params =
+ samsung_smt_7020_tuner_set_params;
+ fe0->dvb.frontend->tuner_priv =
+ &dev->core->i2c_adap;
+ fe0->dvb.frontend->ops.set_voltage =
+ samsung_smt_7020_set_voltage;
+ fe0->dvb.frontend->ops.set_tone =
+ samsung_smt_7020_set_tone;
+ }
+
+ break;
+
default:
printk(KERN_ERR "%s/2: The frontend of your DVB/ATSC card isn't supported yet\n",
core->name);
diff --git a/drivers/media/video/cx88/cx88-input.c b/drivers/media/video/cx88/cx88-input.c
index f9fda18..de180d4 100644
--- a/drivers/media/video/cx88/cx88-input.c
+++ b/drivers/media/video/cx88/cx88-input.c
@@ -192,7 +192,7 @@
struct cx88_IR *ir;
struct input_dev *input_dev;
struct ir_scancode_table *ir_codes = NULL;
- int ir_type = IR_TYPE_OTHER;
+ u64 ir_type = IR_TYPE_OTHER;
int err = -ENOMEM;
ir = kzalloc(sizeof(*ir), GFP_KERNEL);
@@ -383,7 +383,7 @@
cx88_ir_start(core, ir);
/* all done */
- err = ir_input_register(ir->input, ir_codes);
+ err = ir_input_register(ir->input, ir_codes, NULL);
if (err)
goto err_out_stop;
diff --git a/drivers/media/video/cx88/cx88-mpeg.c b/drivers/media/video/cx88/cx88-mpeg.c
index bb51048..338af77 100644
--- a/drivers/media/video/cx88/cx88-mpeg.c
+++ b/drivers/media/video/cx88/cx88-mpeg.c
@@ -110,6 +110,9 @@
case CX88_BOARD_PCHDTV_HD5500:
cx_write(TS_SOP_STAT, 1<<13);
break;
+ case CX88_BOARD_SAMSUNG_SMT_7020:
+ cx_write(TS_SOP_STAT, 0x00);
+ break;
case CX88_BOARD_HAUPPAUGE_NOVASPLUS_S1:
case CX88_BOARD_HAUPPAUGE_NOVASE2_S1:
cx_write(MO_PINMUX_IO, 0x88); /* Enable MPEG parallel IO and video signal pins */
diff --git a/drivers/media/video/cx88/cx88.h b/drivers/media/video/cx88/cx88.h
index b1499bf..48b6c04 100644
--- a/drivers/media/video/cx88/cx88.h
+++ b/drivers/media/video/cx88/cx88.h
@@ -239,6 +239,7 @@
#define CX88_BOARD_WINFAST_DTV1800H 81
#define CX88_BOARD_WINFAST_DTV2000H_J 82
#define CX88_BOARD_PROF_7301 83
+#define CX88_BOARD_SAMSUNG_SMT_7020 84
enum cx88_itype {
CX88_VMUX_COMPOSITE1 = 1,
diff --git a/drivers/media/video/dabusb.c b/drivers/media/video/dabusb.c
index ee43876..9b413a3 100644
--- a/drivers/media/video/dabusb.c
+++ b/drivers/media/video/dabusb.c
@@ -913,6 +913,8 @@
MODULE_AUTHOR( DRIVER_AUTHOR );
MODULE_DESCRIPTION( DRIVER_DESC );
MODULE_LICENSE("GPL");
+MODULE_FIRMWARE("dabusb/firmware.fw");
+MODULE_FIRMWARE("dabusb/bitstream.bin");
module_param(buffers, int, 0);
MODULE_PARM_DESC (buffers, "Number of buffers (default=256)");
diff --git a/drivers/media/video/davinci/Makefile b/drivers/media/video/davinci/Makefile
index 1a8b8f3..a379557 100644
--- a/drivers/media/video/davinci/Makefile
+++ b/drivers/media/video/davinci/Makefile
@@ -15,3 +15,4 @@
obj-$(CONFIG_VIDEO_VPFE_CAPTURE) += vpfe_capture.o
obj-$(CONFIG_VIDEO_DM6446_CCDC) += dm644x_ccdc.o
obj-$(CONFIG_VIDEO_DM355_CCDC) += dm355_ccdc.o
+obj-$(CONFIG_VIDEO_ISIF) += isif.o
diff --git a/drivers/media/video/davinci/dm355_ccdc.c b/drivers/media/video/davinci/dm355_ccdc.c
index 3143900..c29ac88 100644
--- a/drivers/media/video/davinci/dm355_ccdc.c
+++ b/drivers/media/video/davinci/dm355_ccdc.c
@@ -37,8 +37,12 @@
#include <linux/platform_device.h>
#include <linux/uaccess.h>
#include <linux/videodev2.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
#include <media/davinci/dm355_ccdc.h>
#include <media/davinci/vpss.h>
+
#include "dm355_ccdc_regs.h"
#include "ccdc_hw_device.h"
@@ -46,67 +50,75 @@
MODULE_DESCRIPTION("CCDC Driver for DM355");
MODULE_AUTHOR("Texas Instruments");
-static struct device *dev;
-
-/* Object for CCDC raw mode */
-static struct ccdc_params_raw ccdc_hw_params_raw = {
- .pix_fmt = CCDC_PIXFMT_RAW,
- .frm_fmt = CCDC_FRMFMT_PROGRESSIVE,
- .win = CCDC_WIN_VGA,
- .fid_pol = VPFE_PINPOL_POSITIVE,
- .vd_pol = VPFE_PINPOL_POSITIVE,
- .hd_pol = VPFE_PINPOL_POSITIVE,
- .gain = {
- .r_ye = 256,
- .gb_g = 256,
- .gr_cy = 256,
- .b_mg = 256
+static struct ccdc_oper_config {
+ struct device *dev;
+ /* CCDC interface type */
+ enum vpfe_hw_if_type if_type;
+ /* Raw Bayer configuration */
+ struct ccdc_params_raw bayer;
+ /* YCbCr configuration */
+ struct ccdc_params_ycbcr ycbcr;
+ /* Master clock */
+ struct clk *mclk;
+ /* slave clock */
+ struct clk *sclk;
+ /* ccdc base address */
+ void __iomem *base_addr;
+} ccdc_cfg = {
+ /* Raw configurations */
+ .bayer = {
+ .pix_fmt = CCDC_PIXFMT_RAW,
+ .frm_fmt = CCDC_FRMFMT_PROGRESSIVE,
+ .win = CCDC_WIN_VGA,
+ .fid_pol = VPFE_PINPOL_POSITIVE,
+ .vd_pol = VPFE_PINPOL_POSITIVE,
+ .hd_pol = VPFE_PINPOL_POSITIVE,
+ .gain = {
+ .r_ye = 256,
+ .gb_g = 256,
+ .gr_cy = 256,
+ .b_mg = 256
+ },
+ .config_params = {
+ .datasft = 2,
+ .mfilt1 = CCDC_NO_MEDIAN_FILTER1,
+ .mfilt2 = CCDC_NO_MEDIAN_FILTER2,
+ .alaw = {
+ .gama_wd = 2,
+ },
+ .blk_clamp = {
+ .sample_pixel = 1,
+ .dc_sub = 25
+ },
+ .col_pat_field0 = {
+ .olop = CCDC_GREEN_BLUE,
+ .olep = CCDC_BLUE,
+ .elop = CCDC_RED,
+ .elep = CCDC_GREEN_RED
+ },
+ .col_pat_field1 = {
+ .olop = CCDC_GREEN_BLUE,
+ .olep = CCDC_BLUE,
+ .elop = CCDC_RED,
+ .elep = CCDC_GREEN_RED
+ },
+ },
},
- .config_params = {
- .datasft = 2,
- .data_sz = CCDC_DATA_10BITS,
- .mfilt1 = CCDC_NO_MEDIAN_FILTER1,
- .mfilt2 = CCDC_NO_MEDIAN_FILTER2,
- .alaw = {
- .gama_wd = 2,
- },
- .blk_clamp = {
- .sample_pixel = 1,
- .dc_sub = 25
- },
- .col_pat_field0 = {
- .olop = CCDC_GREEN_BLUE,
- .olep = CCDC_BLUE,
- .elop = CCDC_RED,
- .elep = CCDC_GREEN_RED
- },
- .col_pat_field1 = {
- .olop = CCDC_GREEN_BLUE,
- .olep = CCDC_BLUE,
- .elop = CCDC_RED,
- .elep = CCDC_GREEN_RED
- },
+ /* YCbCr configuration */
+ .ycbcr = {
+ .win = CCDC_WIN_PAL,
+ .pix_fmt = CCDC_PIXFMT_YCBCR_8BIT,
+ .frm_fmt = CCDC_FRMFMT_INTERLACED,
+ .fid_pol = VPFE_PINPOL_POSITIVE,
+ .vd_pol = VPFE_PINPOL_POSITIVE,
+ .hd_pol = VPFE_PINPOL_POSITIVE,
+ .bt656_enable = 1,
+ .pix_order = CCDC_PIXORDER_CBYCRY,
+ .buf_type = CCDC_BUFTYPE_FLD_INTERLEAVED
},
};
-/* Object for CCDC ycbcr mode */
-static struct ccdc_params_ycbcr ccdc_hw_params_ycbcr = {
- .win = CCDC_WIN_PAL,
- .pix_fmt = CCDC_PIXFMT_YCBCR_8BIT,
- .frm_fmt = CCDC_FRMFMT_INTERLACED,
- .fid_pol = VPFE_PINPOL_POSITIVE,
- .vd_pol = VPFE_PINPOL_POSITIVE,
- .hd_pol = VPFE_PINPOL_POSITIVE,
- .bt656_enable = 1,
- .pix_order = CCDC_PIXORDER_CBYCRY,
- .buf_type = CCDC_BUFTYPE_FLD_INTERLEAVED
-};
-
-static enum vpfe_hw_if_type ccdc_if_type;
-static void *__iomem ccdc_base_addr;
-static int ccdc_addr_size;
-
/* Raw Bayer formats */
static u32 ccdc_raw_bayer_pix_formats[] =
{V4L2_PIX_FMT_SBGGR8, V4L2_PIX_FMT_SBGGR16};
@@ -118,18 +130,12 @@
/* register access routines */
static inline u32 regr(u32 offset)
{
- return __raw_readl(ccdc_base_addr + offset);
+ return __raw_readl(ccdc_cfg.base_addr + offset);
}
static inline void regw(u32 val, u32 offset)
{
- __raw_writel(val, ccdc_base_addr + offset);
-}
-
-static void ccdc_set_ccdc_base(void *addr, int size)
-{
- ccdc_base_addr = addr;
- ccdc_addr_size = size;
+ __raw_writel(val, ccdc_cfg.base_addr + offset);
}
static void ccdc_enable(int en)
@@ -153,12 +159,12 @@
static void ccdc_config_gain_offset(void)
{
/* configure gain */
- regw(ccdc_hw_params_raw.gain.r_ye, RYEGAIN);
- regw(ccdc_hw_params_raw.gain.gr_cy, GRCYGAIN);
- regw(ccdc_hw_params_raw.gain.gb_g, GBGGAIN);
- regw(ccdc_hw_params_raw.gain.b_mg, BMGGAIN);
+ regw(ccdc_cfg.bayer.gain.r_ye, RYEGAIN);
+ regw(ccdc_cfg.bayer.gain.gr_cy, GRCYGAIN);
+ regw(ccdc_cfg.bayer.gain.gb_g, GBGGAIN);
+ regw(ccdc_cfg.bayer.gain.b_mg, BMGGAIN);
/* configure offset */
- regw(ccdc_hw_params_raw.ccdc_offset, OFFSET);
+ regw(ccdc_cfg.bayer.ccdc_offset, OFFSET);
}
/*
@@ -169,7 +175,7 @@
{
int i;
- dev_dbg(dev, "\nstarting ccdc_restore_defaults...");
+ dev_dbg(ccdc_cfg.dev, "\nstarting ccdc_restore_defaults...");
/* set all registers to zero */
for (i = 0; i <= CCDC_REG_LAST; i += 4)
regw(0, i);
@@ -180,30 +186,29 @@
regw(CULH_DEFAULT, CULH);
regw(CULV_DEFAULT, CULV);
/* Set default Gain and Offset */
- ccdc_hw_params_raw.gain.r_ye = GAIN_DEFAULT;
- ccdc_hw_params_raw.gain.gb_g = GAIN_DEFAULT;
- ccdc_hw_params_raw.gain.gr_cy = GAIN_DEFAULT;
- ccdc_hw_params_raw.gain.b_mg = GAIN_DEFAULT;
+ ccdc_cfg.bayer.gain.r_ye = GAIN_DEFAULT;
+ ccdc_cfg.bayer.gain.gb_g = GAIN_DEFAULT;
+ ccdc_cfg.bayer.gain.gr_cy = GAIN_DEFAULT;
+ ccdc_cfg.bayer.gain.b_mg = GAIN_DEFAULT;
ccdc_config_gain_offset();
regw(OUTCLIP_DEFAULT, OUTCLIP);
regw(LSCCFG2_DEFAULT, LSCCFG2);
/* select ccdc input */
if (vpss_select_ccdc_source(VPSS_CCDCIN)) {
- dev_dbg(dev, "\ncouldn't select ccdc input source");
+ dev_dbg(ccdc_cfg.dev, "\ncouldn't select ccdc input source");
return -EFAULT;
}
/* select ccdc clock */
if (vpss_enable_clock(VPSS_CCDC_CLOCK, 1) < 0) {
- dev_dbg(dev, "\ncouldn't enable ccdc clock");
+ dev_dbg(ccdc_cfg.dev, "\ncouldn't enable ccdc clock");
return -EFAULT;
}
- dev_dbg(dev, "\nEnd of ccdc_restore_defaults...");
+ dev_dbg(ccdc_cfg.dev, "\nEnd of ccdc_restore_defaults...");
return 0;
}
static int ccdc_open(struct device *device)
{
- dev = device;
return ccdc_restore_defaults();
}
@@ -226,7 +231,7 @@
int vert_start, vert_nr_lines;
int mid_img = 0;
- dev_dbg(dev, "\nStarting ccdc_setwin...");
+ dev_dbg(ccdc_cfg.dev, "\nStarting ccdc_setwin...");
/*
* ppc - per pixel count. indicates how many pixels per cell
@@ -260,45 +265,46 @@
regw(vert_start & CCDC_START_VER_ONE_MASK, SLV0);
regw(vert_start & CCDC_START_VER_TWO_MASK, SLV1);
regw(vert_nr_lines & CCDC_NUM_LINES_VER, NLV);
- dev_dbg(dev, "\nEnd of ccdc_setwin...");
+ dev_dbg(ccdc_cfg.dev, "\nEnd of ccdc_setwin...");
}
static int validate_ccdc_param(struct ccdc_config_params_raw *ccdcparam)
{
if (ccdcparam->datasft < CCDC_DATA_NO_SHIFT ||
ccdcparam->datasft > CCDC_DATA_SHIFT_6BIT) {
- dev_dbg(dev, "Invalid value of data shift\n");
+ dev_dbg(ccdc_cfg.dev, "Invalid value of data shift\n");
return -EINVAL;
}
if (ccdcparam->mfilt1 < CCDC_NO_MEDIAN_FILTER1 ||
ccdcparam->mfilt1 > CCDC_MEDIAN_FILTER1) {
- dev_dbg(dev, "Invalid value of median filter1\n");
+ dev_dbg(ccdc_cfg.dev, "Invalid value of median filter1\n");
return -EINVAL;
}
if (ccdcparam->mfilt2 < CCDC_NO_MEDIAN_FILTER2 ||
ccdcparam->mfilt2 > CCDC_MEDIAN_FILTER2) {
- dev_dbg(dev, "Invalid value of median filter2\n");
+ dev_dbg(ccdc_cfg.dev, "Invalid value of median filter2\n");
return -EINVAL;
}
if ((ccdcparam->med_filt_thres < 0) ||
(ccdcparam->med_filt_thres > CCDC_MED_FILT_THRESH)) {
- dev_dbg(dev, "Invalid value of median filter threshold\n");
+ dev_dbg(ccdc_cfg.dev,
+ "Invalid value of median filter thresold\n");
return -EINVAL;
}
if (ccdcparam->data_sz < CCDC_DATA_16BITS ||
ccdcparam->data_sz > CCDC_DATA_8BITS) {
- dev_dbg(dev, "Invalid value of data size\n");
+ dev_dbg(ccdc_cfg.dev, "Invalid value of data size\n");
return -EINVAL;
}
if (ccdcparam->alaw.enable) {
if (ccdcparam->alaw.gama_wd < CCDC_GAMMA_BITS_13_4 ||
ccdcparam->alaw.gama_wd > CCDC_GAMMA_BITS_09_0) {
- dev_dbg(dev, "Invalid value of ALAW\n");
+ dev_dbg(ccdc_cfg.dev, "Invalid value of ALAW\n");
return -EINVAL;
}
}
@@ -306,12 +312,14 @@
if (ccdcparam->blk_clamp.b_clamp_enable) {
if (ccdcparam->blk_clamp.sample_pixel < CCDC_SAMPLE_1PIXELS ||
ccdcparam->blk_clamp.sample_pixel > CCDC_SAMPLE_16PIXELS) {
- dev_dbg(dev, "Invalid value of sample pixel\n");
+ dev_dbg(ccdc_cfg.dev,
+ "Invalid value of sample pixel\n");
return -EINVAL;
}
if (ccdcparam->blk_clamp.sample_ln < CCDC_SAMPLE_1LINES ||
ccdcparam->blk_clamp.sample_ln > CCDC_SAMPLE_16LINES) {
- dev_dbg(dev, "Invalid value of sample lines\n");
+ dev_dbg(ccdc_cfg.dev,
+ "Invalid value of sample lines\n");
return -EINVAL;
}
}
@@ -325,18 +333,18 @@
int x;
/* only raw module parameters can be set through the IOCTL */
- if (ccdc_if_type != VPFE_RAW_BAYER)
+ if (ccdc_cfg.if_type != VPFE_RAW_BAYER)
return -EINVAL;
x = copy_from_user(&ccdc_raw_params, params, sizeof(ccdc_raw_params));
if (x) {
- dev_dbg(dev, "ccdc_set_params: error in copying ccdc"
+ dev_dbg(ccdc_cfg.dev, "ccdc_set_params: error in copying ccdc"
"params, %d\n", x);
return -EFAULT;
}
if (!validate_ccdc_param(&ccdc_raw_params)) {
- memcpy(&ccdc_hw_params_raw.config_params,
+ memcpy(&ccdc_cfg.bayer.config_params,
&ccdc_raw_params,
sizeof(ccdc_raw_params));
return 0;
@@ -347,11 +355,11 @@
/* This function will configure CCDC for YCbCr video capture */
static void ccdc_config_ycbcr(void)
{
- struct ccdc_params_ycbcr *params = &ccdc_hw_params_ycbcr;
+ struct ccdc_params_ycbcr *params = &ccdc_cfg.ycbcr;
u32 temp;
/* first set the CCDC power on defaults values in all registers */
- dev_dbg(dev, "\nStarting ccdc_config_ycbcr...");
+ dev_dbg(ccdc_cfg.dev, "\nStarting ccdc_config_ycbcr...");
ccdc_restore_defaults();
/* configure pixel format & video frame format */
@@ -403,7 +411,7 @@
regw(CCDC_SDOFST_FIELD_INTERLEAVED, SDOFST);
}
- dev_dbg(dev, "\nEnd of ccdc_config_ycbcr...\n");
+ dev_dbg(ccdc_cfg.dev, "\nEnd of ccdc_config_ycbcr...\n");
}
/*
@@ -483,7 +491,7 @@
*/
if (count) {
- dev_err(dev, "defect table write timeout !!!\n");
+ dev_err(ccdc_cfg.dev, "defect table write timeout !!!\n");
return -1;
}
return 0;
@@ -605,12 +613,12 @@
/* This function will configure CCDC for Raw mode image capture */
static int ccdc_config_raw(void)
{
- struct ccdc_params_raw *params = &ccdc_hw_params_raw;
+ struct ccdc_params_raw *params = &ccdc_cfg.bayer;
struct ccdc_config_params_raw *config_params =
- &ccdc_hw_params_raw.config_params;
+ &ccdc_cfg.bayer.config_params;
unsigned int val;
- dev_dbg(dev, "\nStarting ccdc_config_raw...");
+ dev_dbg(ccdc_cfg.dev, "\nStarting ccdc_config_raw...");
/* restore power on defaults to register */
ccdc_restore_defaults();
@@ -659,7 +667,7 @@
val |= (config_params->datasft & CCDC_DATASFT_MASK) <<
CCDC_DATASFT_SHIFT;
regw(val , MODESET);
- dev_dbg(dev, "\nWriting 0x%x to MODESET...\n", val);
+ dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to MODESET...\n", val);
/* Configure the Median Filter threshold */
regw((config_params->med_filt_thres) & CCDC_MED_FILT_THRESH, MEDFILT);
@@ -681,7 +689,7 @@
(config_params->mfilt2 << CCDC_MFILT2_SHIFT));
regw(val, GAMMAWD);
- dev_dbg(dev, "\nWriting 0x%x to GAMMAWD...\n", val);
+ dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to GAMMAWD...\n", val);
/* configure video window */
ccdc_setwin(¶ms->win, params->frm_fmt, 1);
@@ -706,7 +714,7 @@
/* Configure the Gain & offset control */
ccdc_config_gain_offset();
- dev_dbg(dev, "\nWriting %x to COLPTN...\n", val);
+ dev_dbg(ccdc_cfg.dev, "\nWriting %x to COLPTN...\n", val);
/* Configure DATAOFST register */
val = (config_params->data_offset.horz_offset & CCDC_DATAOFST_MASK) <<
@@ -726,7 +734,7 @@
CCDC_HSIZE_VAL_MASK;
/* adjust to multiple of 32 */
- dev_dbg(dev, "\nWriting 0x%x to HSIZE...\n",
+ dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to HSIZE...\n",
(((params->win.width) + 31) >> 5) &
CCDC_HSIZE_VAL_MASK);
} else {
@@ -734,7 +742,7 @@
val |= (((params->win.width * 2) + 31) >> 5) &
CCDC_HSIZE_VAL_MASK;
- dev_dbg(dev, "\nWriting 0x%x to HSIZE...\n",
+ dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to HSIZE...\n",
(((params->win.width * 2) + 31) >> 5) &
CCDC_HSIZE_VAL_MASK);
}
@@ -745,34 +753,34 @@
if (params->image_invert_enable) {
/* For interlace inverse mode */
regw(CCDC_SDOFST_INTERLACE_INVERSE, SDOFST);
- dev_dbg(dev, "\nWriting %x to SDOFST...\n",
+ dev_dbg(ccdc_cfg.dev, "\nWriting %x to SDOFST...\n",
CCDC_SDOFST_INTERLACE_INVERSE);
} else {
/* For interlace non inverse mode */
regw(CCDC_SDOFST_INTERLACE_NORMAL, SDOFST);
- dev_dbg(dev, "\nWriting %x to SDOFST...\n",
+ dev_dbg(ccdc_cfg.dev, "\nWriting %x to SDOFST...\n",
CCDC_SDOFST_INTERLACE_NORMAL);
}
} else if (params->frm_fmt == CCDC_FRMFMT_PROGRESSIVE) {
if (params->image_invert_enable) {
/* For progessive inverse mode */
regw(CCDC_SDOFST_PROGRESSIVE_INVERSE, SDOFST);
- dev_dbg(dev, "\nWriting %x to SDOFST...\n",
+ dev_dbg(ccdc_cfg.dev, "\nWriting %x to SDOFST...\n",
CCDC_SDOFST_PROGRESSIVE_INVERSE);
} else {
/* For progessive non inverse mode */
regw(CCDC_SDOFST_PROGRESSIVE_NORMAL, SDOFST);
- dev_dbg(dev, "\nWriting %x to SDOFST...\n",
+ dev_dbg(ccdc_cfg.dev, "\nWriting %x to SDOFST...\n",
CCDC_SDOFST_PROGRESSIVE_NORMAL);
}
}
- dev_dbg(dev, "\nend of ccdc_config_raw...");
+ dev_dbg(ccdc_cfg.dev, "\nend of ccdc_config_raw...");
return 0;
}
static int ccdc_configure(void)
{
- if (ccdc_if_type == VPFE_RAW_BAYER)
+ if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
return ccdc_config_raw();
else
ccdc_config_ycbcr();
@@ -781,23 +789,23 @@
static int ccdc_set_buftype(enum ccdc_buftype buf_type)
{
- if (ccdc_if_type == VPFE_RAW_BAYER)
- ccdc_hw_params_raw.buf_type = buf_type;
+ if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
+ ccdc_cfg.bayer.buf_type = buf_type;
else
- ccdc_hw_params_ycbcr.buf_type = buf_type;
+ ccdc_cfg.ycbcr.buf_type = buf_type;
return 0;
}
static enum ccdc_buftype ccdc_get_buftype(void)
{
- if (ccdc_if_type == VPFE_RAW_BAYER)
- return ccdc_hw_params_raw.buf_type;
- return ccdc_hw_params_ycbcr.buf_type;
+ if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
+ return ccdc_cfg.bayer.buf_type;
+ return ccdc_cfg.ycbcr.buf_type;
}
static int ccdc_enum_pix(u32 *pix, int i)
{
int ret = -EINVAL;
- if (ccdc_if_type == VPFE_RAW_BAYER) {
+ if (ccdc_cfg.if_type == VPFE_RAW_BAYER) {
if (i < ARRAY_SIZE(ccdc_raw_bayer_pix_formats)) {
*pix = ccdc_raw_bayer_pix_formats[i];
ret = 0;
@@ -813,20 +821,19 @@
static int ccdc_set_pixel_format(u32 pixfmt)
{
- struct ccdc_a_law *alaw =
- &ccdc_hw_params_raw.config_params.alaw;
+ struct ccdc_a_law *alaw = &ccdc_cfg.bayer.config_params.alaw;
- if (ccdc_if_type == VPFE_RAW_BAYER) {
- ccdc_hw_params_raw.pix_fmt = CCDC_PIXFMT_RAW;
+ if (ccdc_cfg.if_type == VPFE_RAW_BAYER) {
+ ccdc_cfg.bayer.pix_fmt = CCDC_PIXFMT_RAW;
if (pixfmt == V4L2_PIX_FMT_SBGGR8)
alaw->enable = 1;
else if (pixfmt != V4L2_PIX_FMT_SBGGR16)
return -EINVAL;
} else {
if (pixfmt == V4L2_PIX_FMT_YUYV)
- ccdc_hw_params_ycbcr.pix_order = CCDC_PIXORDER_YCBYCR;
+ ccdc_cfg.ycbcr.pix_order = CCDC_PIXORDER_YCBYCR;
else if (pixfmt == V4L2_PIX_FMT_UYVY)
- ccdc_hw_params_ycbcr.pix_order = CCDC_PIXORDER_CBYCRY;
+ ccdc_cfg.ycbcr.pix_order = CCDC_PIXORDER_CBYCRY;
else
return -EINVAL;
}
@@ -834,17 +841,16 @@
}
static u32 ccdc_get_pixel_format(void)
{
- struct ccdc_a_law *alaw =
- &ccdc_hw_params_raw.config_params.alaw;
+ struct ccdc_a_law *alaw = &ccdc_cfg.bayer.config_params.alaw;
u32 pixfmt;
- if (ccdc_if_type == VPFE_RAW_BAYER)
+ if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
if (alaw->enable)
pixfmt = V4L2_PIX_FMT_SBGGR8;
else
pixfmt = V4L2_PIX_FMT_SBGGR16;
else {
- if (ccdc_hw_params_ycbcr.pix_order == CCDC_PIXORDER_YCBYCR)
+ if (ccdc_cfg.ycbcr.pix_order == CCDC_PIXORDER_YCBYCR)
pixfmt = V4L2_PIX_FMT_YUYV;
else
pixfmt = V4L2_PIX_FMT_UYVY;
@@ -853,53 +859,53 @@
}
static int ccdc_set_image_window(struct v4l2_rect *win)
{
- if (ccdc_if_type == VPFE_RAW_BAYER)
- ccdc_hw_params_raw.win = *win;
+ if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
+ ccdc_cfg.bayer.win = *win;
else
- ccdc_hw_params_ycbcr.win = *win;
+ ccdc_cfg.ycbcr.win = *win;
return 0;
}
static void ccdc_get_image_window(struct v4l2_rect *win)
{
- if (ccdc_if_type == VPFE_RAW_BAYER)
- *win = ccdc_hw_params_raw.win;
+ if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
+ *win = ccdc_cfg.bayer.win;
else
- *win = ccdc_hw_params_ycbcr.win;
+ *win = ccdc_cfg.ycbcr.win;
}
static unsigned int ccdc_get_line_length(void)
{
struct ccdc_config_params_raw *config_params =
- &ccdc_hw_params_raw.config_params;
+ &ccdc_cfg.bayer.config_params;
unsigned int len;
- if (ccdc_if_type == VPFE_RAW_BAYER) {
+ if (ccdc_cfg.if_type == VPFE_RAW_BAYER) {
if ((config_params->alaw.enable) ||
(config_params->data_sz == CCDC_DATA_8BITS))
- len = ccdc_hw_params_raw.win.width;
+ len = ccdc_cfg.bayer.win.width;
else
- len = ccdc_hw_params_raw.win.width * 2;
+ len = ccdc_cfg.bayer.win.width * 2;
} else
- len = ccdc_hw_params_ycbcr.win.width * 2;
+ len = ccdc_cfg.ycbcr.win.width * 2;
return ALIGN(len, 32);
}
static int ccdc_set_frame_format(enum ccdc_frmfmt frm_fmt)
{
- if (ccdc_if_type == VPFE_RAW_BAYER)
- ccdc_hw_params_raw.frm_fmt = frm_fmt;
+ if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
+ ccdc_cfg.bayer.frm_fmt = frm_fmt;
else
- ccdc_hw_params_ycbcr.frm_fmt = frm_fmt;
+ ccdc_cfg.ycbcr.frm_fmt = frm_fmt;
return 0;
}
static enum ccdc_frmfmt ccdc_get_frame_format(void)
{
- if (ccdc_if_type == VPFE_RAW_BAYER)
- return ccdc_hw_params_raw.frm_fmt;
+ if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
+ return ccdc_cfg.bayer.frm_fmt;
else
- return ccdc_hw_params_ycbcr.frm_fmt;
+ return ccdc_cfg.ycbcr.frm_fmt;
}
static int ccdc_getfid(void)
@@ -916,14 +922,14 @@
static int ccdc_set_hw_if_params(struct vpfe_hw_if_param *params)
{
- ccdc_if_type = params->if_type;
+ ccdc_cfg.if_type = params->if_type;
switch (params->if_type) {
case VPFE_BT656:
case VPFE_YCBCR_SYNC_16:
case VPFE_YCBCR_SYNC_8:
- ccdc_hw_params_ycbcr.vd_pol = params->vdpol;
- ccdc_hw_params_ycbcr.hd_pol = params->hdpol;
+ ccdc_cfg.ycbcr.vd_pol = params->vdpol;
+ ccdc_cfg.ycbcr.hd_pol = params->hdpol;
break;
default:
/* TODO add support for raw bayer here */
@@ -938,7 +944,6 @@
.hw_ops = {
.open = ccdc_open,
.close = ccdc_close,
- .set_ccdc_base = ccdc_set_ccdc_base,
.enable = ccdc_enable,
.enable_out_to_sdram = ccdc_enable_output_to_sdram,
.set_hw_if_params = ccdc_set_hw_if_params,
@@ -959,19 +964,118 @@
},
};
+static int __init dm355_ccdc_probe(struct platform_device *pdev)
+{
+ void (*setup_pinmux)(void);
+ struct resource *res;
+ int status = 0;
+
+ /*
+ * first try to register with vpfe. If not correct platform, then we
+ * don't have to iomap
+ */
+ status = vpfe_register_ccdc_device(&ccdc_hw_dev);
+ if (status < 0)
+ return status;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ status = -ENODEV;
+ goto fail_nores;
+ }
+
+ res = request_mem_region(res->start, resource_size(res), res->name);
+ if (!res) {
+ status = -EBUSY;
+ goto fail_nores;
+ }
+
+ ccdc_cfg.base_addr = ioremap_nocache(res->start, resource_size(res));
+ if (!ccdc_cfg.base_addr) {
+ status = -ENOMEM;
+ goto fail_nomem;
+ }
+
+ /* Get and enable Master clock */
+ ccdc_cfg.mclk = clk_get(&pdev->dev, "master");
+ if (IS_ERR(ccdc_cfg.mclk)) {
+ status = PTR_ERR(ccdc_cfg.mclk);
+ goto fail_nomap;
+ }
+ if (clk_enable(ccdc_cfg.mclk)) {
+ status = -ENODEV;
+ goto fail_mclk;
+ }
+
+ /* Get and enable Slave clock */
+ ccdc_cfg.sclk = clk_get(&pdev->dev, "slave");
+ if (IS_ERR(ccdc_cfg.sclk)) {
+ status = PTR_ERR(ccdc_cfg.sclk);
+ goto fail_mclk;
+ }
+ if (clk_enable(ccdc_cfg.sclk)) {
+ status = -ENODEV;
+ goto fail_sclk;
+ }
+
+ /* Platform data holds setup_pinmux function ptr */
+ if (NULL == pdev->dev.platform_data) {
+ status = -ENODEV;
+ goto fail_sclk;
+ }
+ setup_pinmux = pdev->dev.platform_data;
+ /*
+ * setup Mux configuration for ccdc which may be different for
+ * different SoCs using this CCDC
+ */
+ setup_pinmux();
+ ccdc_cfg.dev = &pdev->dev;
+ printk(KERN_NOTICE "%s is registered with vpfe.\n", ccdc_hw_dev.name);
+ return 0;
+fail_sclk:
+ clk_put(ccdc_cfg.sclk);
+fail_mclk:
+ clk_put(ccdc_cfg.mclk);
+fail_nomap:
+ iounmap(ccdc_cfg.base_addr);
+fail_nomem:
+ release_mem_region(res->start, resource_size(res));
+fail_nores:
+ vpfe_unregister_ccdc_device(&ccdc_hw_dev);
+ return status;
+}
+
+static int dm355_ccdc_remove(struct platform_device *pdev)
+{
+ struct resource *res;
+
+ clk_put(ccdc_cfg.mclk);
+ clk_put(ccdc_cfg.sclk);
+ iounmap(ccdc_cfg.base_addr);
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (res)
+ release_mem_region(res->start, resource_size(res));
+ vpfe_unregister_ccdc_device(&ccdc_hw_dev);
+ return 0;
+}
+
+static struct platform_driver dm355_ccdc_driver = {
+ .driver = {
+ .name = "dm355_ccdc",
+ .owner = THIS_MODULE,
+ },
+ .remove = __devexit_p(dm355_ccdc_remove),
+ .probe = dm355_ccdc_probe,
+};
+
static int __init dm355_ccdc_init(void)
{
- printk(KERN_NOTICE "dm355_ccdc_init\n");
- if (vpfe_register_ccdc_device(&ccdc_hw_dev) < 0)
- return -1;
- printk(KERN_NOTICE "%s is registered with vpfe.\n",
- ccdc_hw_dev.name);
- return 0;
+ return platform_driver_register(&dm355_ccdc_driver);
}
static void __exit dm355_ccdc_exit(void)
{
- vpfe_unregister_ccdc_device(&ccdc_hw_dev);
+ platform_driver_unregister(&dm355_ccdc_driver);
}
module_init(dm355_ccdc_init);
diff --git a/drivers/media/video/davinci/dm644x_ccdc.c b/drivers/media/video/davinci/dm644x_ccdc.c
index d5fa193..0c394ca 100644
--- a/drivers/media/video/davinci/dm644x_ccdc.c
+++ b/drivers/media/video/davinci/dm644x_ccdc.c
@@ -37,8 +37,12 @@
#include <linux/platform_device.h>
#include <linux/uaccess.h>
#include <linux/videodev2.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
#include <media/davinci/dm644x_ccdc.h>
#include <media/davinci/vpss.h>
+
#include "dm644x_ccdc_regs.h"
#include "ccdc_hw_device.h"
@@ -46,32 +50,44 @@
MODULE_DESCRIPTION("CCDC Driver for DM6446");
MODULE_AUTHOR("Texas Instruments");
-static struct device *dev;
-
-/* Object for CCDC raw mode */
-static struct ccdc_params_raw ccdc_hw_params_raw = {
- .pix_fmt = CCDC_PIXFMT_RAW,
- .frm_fmt = CCDC_FRMFMT_PROGRESSIVE,
- .win = CCDC_WIN_VGA,
- .fid_pol = VPFE_PINPOL_POSITIVE,
- .vd_pol = VPFE_PINPOL_POSITIVE,
- .hd_pol = VPFE_PINPOL_POSITIVE,
- .config_params = {
- .data_sz = CCDC_DATA_10BITS,
+static struct ccdc_oper_config {
+ struct device *dev;
+ /* CCDC interface type */
+ enum vpfe_hw_if_type if_type;
+ /* Raw Bayer configuration */
+ struct ccdc_params_raw bayer;
+ /* YCbCr configuration */
+ struct ccdc_params_ycbcr ycbcr;
+ /* Master clock */
+ struct clk *mclk;
+ /* slave clock */
+ struct clk *sclk;
+ /* ccdc base address */
+ void __iomem *base_addr;
+} ccdc_cfg = {
+ /* Raw configurations */
+ .bayer = {
+ .pix_fmt = CCDC_PIXFMT_RAW,
+ .frm_fmt = CCDC_FRMFMT_PROGRESSIVE,
+ .win = CCDC_WIN_VGA,
+ .fid_pol = VPFE_PINPOL_POSITIVE,
+ .vd_pol = VPFE_PINPOL_POSITIVE,
+ .hd_pol = VPFE_PINPOL_POSITIVE,
+ .config_params = {
+ .data_sz = CCDC_DATA_10BITS,
+ },
},
-};
-
-/* Object for CCDC ycbcr mode */
-static struct ccdc_params_ycbcr ccdc_hw_params_ycbcr = {
- .pix_fmt = CCDC_PIXFMT_YCBCR_8BIT,
- .frm_fmt = CCDC_FRMFMT_INTERLACED,
- .win = CCDC_WIN_PAL,
- .fid_pol = VPFE_PINPOL_POSITIVE,
- .vd_pol = VPFE_PINPOL_POSITIVE,
- .hd_pol = VPFE_PINPOL_POSITIVE,
- .bt656_enable = 1,
- .pix_order = CCDC_PIXORDER_CBYCRY,
- .buf_type = CCDC_BUFTYPE_FLD_INTERLEAVED
+ .ycbcr = {
+ .pix_fmt = CCDC_PIXFMT_YCBCR_8BIT,
+ .frm_fmt = CCDC_FRMFMT_INTERLACED,
+ .win = CCDC_WIN_PAL,
+ .fid_pol = VPFE_PINPOL_POSITIVE,
+ .vd_pol = VPFE_PINPOL_POSITIVE,
+ .hd_pol = VPFE_PINPOL_POSITIVE,
+ .bt656_enable = 1,
+ .pix_order = CCDC_PIXORDER_CBYCRY,
+ .buf_type = CCDC_BUFTYPE_FLD_INTERLEAVED
+ },
};
#define CCDC_MAX_RAW_YUV_FORMATS 2
@@ -84,25 +100,15 @@
static u32 ccdc_raw_yuv_pix_formats[] =
{V4L2_PIX_FMT_UYVY, V4L2_PIX_FMT_YUYV};
-static void *__iomem ccdc_base_addr;
-static int ccdc_addr_size;
-static enum vpfe_hw_if_type ccdc_if_type;
-
/* register access routines */
static inline u32 regr(u32 offset)
{
- return __raw_readl(ccdc_base_addr + offset);
+ return __raw_readl(ccdc_cfg.base_addr + offset);
}
static inline void regw(u32 val, u32 offset)
{
- __raw_writel(val, ccdc_base_addr + offset);
-}
-
-static void ccdc_set_ccdc_base(void *addr, int size)
-{
- ccdc_base_addr = addr;
- ccdc_addr_size = size;
+ __raw_writel(val, ccdc_cfg.base_addr + offset);
}
static void ccdc_enable(int flag)
@@ -132,7 +138,7 @@
int vert_start, vert_nr_lines;
int val = 0, mid_img = 0;
- dev_dbg(dev, "\nStarting ccdc_setwin...");
+ dev_dbg(ccdc_cfg.dev, "\nStarting ccdc_setwin...");
/*
* ppc - per pixel count. indicates how many pixels per cell
* output to SDRAM. example, for ycbcr, it is one y and one c, so 2.
@@ -171,7 +177,7 @@
regw((vert_start << CCDC_VERT_START_SLV0_SHIFT) | vert_start,
CCDC_VERT_START);
regw(vert_nr_lines, CCDC_VERT_LINES);
- dev_dbg(dev, "\nEnd of ccdc_setwin...");
+ dev_dbg(ccdc_cfg.dev, "\nEnd of ccdc_setwin...");
}
static void ccdc_readregs(void)
@@ -179,39 +185,39 @@
unsigned int val = 0;
val = regr(CCDC_ALAW);
- dev_notice(dev, "\nReading 0x%x to ALAW...\n", val);
+ dev_notice(ccdc_cfg.dev, "\nReading 0x%x to ALAW...\n", val);
val = regr(CCDC_CLAMP);
- dev_notice(dev, "\nReading 0x%x to CLAMP...\n", val);
+ dev_notice(ccdc_cfg.dev, "\nReading 0x%x to CLAMP...\n", val);
val = regr(CCDC_DCSUB);
- dev_notice(dev, "\nReading 0x%x to DCSUB...\n", val);
+ dev_notice(ccdc_cfg.dev, "\nReading 0x%x to DCSUB...\n", val);
val = regr(CCDC_BLKCMP);
- dev_notice(dev, "\nReading 0x%x to BLKCMP...\n", val);
+ dev_notice(ccdc_cfg.dev, "\nReading 0x%x to BLKCMP...\n", val);
val = regr(CCDC_FPC_ADDR);
- dev_notice(dev, "\nReading 0x%x to FPC_ADDR...\n", val);
+ dev_notice(ccdc_cfg.dev, "\nReading 0x%x to FPC_ADDR...\n", val);
val = regr(CCDC_FPC);
- dev_notice(dev, "\nReading 0x%x to FPC...\n", val);
+ dev_notice(ccdc_cfg.dev, "\nReading 0x%x to FPC...\n", val);
val = regr(CCDC_FMTCFG);
- dev_notice(dev, "\nReading 0x%x to FMTCFG...\n", val);
+ dev_notice(ccdc_cfg.dev, "\nReading 0x%x to FMTCFG...\n", val);
val = regr(CCDC_COLPTN);
- dev_notice(dev, "\nReading 0x%x to COLPTN...\n", val);
+ dev_notice(ccdc_cfg.dev, "\nReading 0x%x to COLPTN...\n", val);
val = regr(CCDC_FMT_HORZ);
- dev_notice(dev, "\nReading 0x%x to FMT_HORZ...\n", val);
+ dev_notice(ccdc_cfg.dev, "\nReading 0x%x to FMT_HORZ...\n", val);
val = regr(CCDC_FMT_VERT);
- dev_notice(dev, "\nReading 0x%x to FMT_VERT...\n", val);
+ dev_notice(ccdc_cfg.dev, "\nReading 0x%x to FMT_VERT...\n", val);
val = regr(CCDC_HSIZE_OFF);
- dev_notice(dev, "\nReading 0x%x to HSIZE_OFF...\n", val);
+ dev_notice(ccdc_cfg.dev, "\nReading 0x%x to HSIZE_OFF...\n", val);
val = regr(CCDC_SDOFST);
- dev_notice(dev, "\nReading 0x%x to SDOFST...\n", val);
+ dev_notice(ccdc_cfg.dev, "\nReading 0x%x to SDOFST...\n", val);
val = regr(CCDC_VP_OUT);
- dev_notice(dev, "\nReading 0x%x to VP_OUT...\n", val);
+ dev_notice(ccdc_cfg.dev, "\nReading 0x%x to VP_OUT...\n", val);
val = regr(CCDC_SYN_MODE);
- dev_notice(dev, "\nReading 0x%x to SYN_MODE...\n", val);
+ dev_notice(ccdc_cfg.dev, "\nReading 0x%x to SYN_MODE...\n", val);
val = regr(CCDC_HORZ_INFO);
- dev_notice(dev, "\nReading 0x%x to HORZ_INFO...\n", val);
+ dev_notice(ccdc_cfg.dev, "\nReading 0x%x to HORZ_INFO...\n", val);
val = regr(CCDC_VERT_START);
- dev_notice(dev, "\nReading 0x%x to VERT_START...\n", val);
+ dev_notice(ccdc_cfg.dev, "\nReading 0x%x to VERT_START...\n", val);
val = regr(CCDC_VERT_LINES);
- dev_notice(dev, "\nReading 0x%x to VERT_LINES...\n", val);
+ dev_notice(ccdc_cfg.dev, "\nReading 0x%x to VERT_LINES...\n", val);
}
static int validate_ccdc_param(struct ccdc_config_params_raw *ccdcparam)
@@ -220,7 +226,7 @@
if ((ccdcparam->alaw.gama_wd > CCDC_GAMMA_BITS_09_0) ||
(ccdcparam->alaw.gama_wd < CCDC_GAMMA_BITS_15_6) ||
(ccdcparam->alaw.gama_wd < ccdcparam->data_sz)) {
- dev_dbg(dev, "\nInvalid data line select");
+ dev_dbg(ccdc_cfg.dev, "\nInvalid data line select");
return -1;
}
}
@@ -230,7 +236,7 @@
static int ccdc_update_raw_params(struct ccdc_config_params_raw *raw_params)
{
struct ccdc_config_params_raw *config_params =
- &ccdc_hw_params_raw.config_params;
+ &ccdc_cfg.bayer.config_params;
unsigned int *fpc_virtaddr = NULL;
unsigned int *fpc_physaddr = NULL;
@@ -266,7 +272,7 @@
FP_NUM_BYTES));
if (fpc_virtaddr == NULL) {
- dev_dbg(dev,
+ dev_dbg(ccdc_cfg.dev,
"\nUnable to allocate memory for FPC");
return -EFAULT;
}
@@ -279,7 +285,7 @@
if (copy_from_user(fpc_virtaddr,
(void __user *)raw_params->fault_pxl.fpc_table_addr,
config_params->fault_pxl.fp_num * FP_NUM_BYTES)) {
- dev_dbg(dev, "\n copy_from_user failed");
+ dev_dbg(ccdc_cfg.dev, "\n copy_from_user failed");
return -EFAULT;
}
config_params->fault_pxl.fpc_table_addr = (unsigned int)fpc_physaddr;
@@ -289,7 +295,7 @@
static int ccdc_close(struct device *dev)
{
struct ccdc_config_params_raw *config_params =
- &ccdc_hw_params_raw.config_params;
+ &ccdc_cfg.bayer.config_params;
unsigned int *fpc_physaddr = NULL, *fpc_virtaddr = NULL;
fpc_physaddr = (unsigned int *)config_params->fault_pxl.fpc_table_addr;
@@ -323,9 +329,8 @@
static int ccdc_open(struct device *device)
{
- dev = device;
ccdc_restore_defaults();
- if (ccdc_if_type == VPFE_RAW_BAYER)
+ if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
ccdc_enable_vport(1);
return 0;
}
@@ -341,12 +346,12 @@
struct ccdc_config_params_raw ccdc_raw_params;
int x;
- if (ccdc_if_type != VPFE_RAW_BAYER)
+ if (ccdc_cfg.if_type != VPFE_RAW_BAYER)
return -EINVAL;
x = copy_from_user(&ccdc_raw_params, params, sizeof(ccdc_raw_params));
if (x) {
- dev_dbg(dev, "ccdc_set_params: error in copying"
+ dev_dbg(ccdc_cfg.dev, "ccdc_set_params: error in copying"
"ccdc params, %d\n", x);
return -EFAULT;
}
@@ -364,10 +369,10 @@
*/
void ccdc_config_ycbcr(void)
{
- struct ccdc_params_ycbcr *params = &ccdc_hw_params_ycbcr;
+ struct ccdc_params_ycbcr *params = &ccdc_cfg.ycbcr;
u32 syn_mode;
- dev_dbg(dev, "\nStarting ccdc_config_ycbcr...");
+ dev_dbg(ccdc_cfg.dev, "\nStarting ccdc_config_ycbcr...");
/*
* first restore the CCDC registers to default values
* This is important since we assume default values to be set in
@@ -428,7 +433,7 @@
regw(CCDC_SDOFST_FIELD_INTERLEAVED, CCDC_SDOFST);
ccdc_sbl_reset();
- dev_dbg(dev, "\nEnd of ccdc_config_ycbcr...\n");
+ dev_dbg(ccdc_cfg.dev, "\nEnd of ccdc_config_ycbcr...\n");
ccdc_readregs();
}
@@ -440,9 +445,9 @@
/* configure DCSub */
val = (bclamp->dc_sub) & CCDC_BLK_DC_SUB_MASK;
regw(val, CCDC_DCSUB);
- dev_dbg(dev, "\nWriting 0x%x to DCSUB...\n", val);
+ dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to DCSUB...\n", val);
regw(CCDC_CLAMP_DEFAULT_VAL, CCDC_CLAMP);
- dev_dbg(dev, "\nWriting 0x0000 to CLAMP...\n");
+ dev_dbg(ccdc_cfg.dev, "\nWriting 0x0000 to CLAMP...\n");
return;
}
/*
@@ -457,10 +462,10 @@
((bclamp->sample_pixel & CCDC_BLK_SAMPLE_LN_MASK) <<
CCDC_BLK_SAMPLE_LN_SHIFT) | CCDC_BLK_CLAMP_ENABLE);
regw(val, CCDC_CLAMP);
- dev_dbg(dev, "\nWriting 0x%x to CLAMP...\n", val);
+ dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to CLAMP...\n", val);
/* If Black clamping is enable then make dcsub 0 */
regw(CCDC_DCSUB_DEFAULT_VAL, CCDC_DCSUB);
- dev_dbg(dev, "\nWriting 0x00000000 to DCSUB...\n");
+ dev_dbg(ccdc_cfg.dev, "\nWriting 0x00000000 to DCSUB...\n");
}
static void ccdc_config_black_compense(struct ccdc_black_compensation *bcomp)
@@ -490,17 +495,17 @@
/* Configure Fault pixel if needed */
regw(fpc->fpc_table_addr, CCDC_FPC_ADDR);
- dev_dbg(dev, "\nWriting 0x%x to FPC_ADDR...\n",
+ dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to FPC_ADDR...\n",
(fpc->fpc_table_addr));
/* Write the FPC params with FPC disable */
val = fpc->fp_num & CCDC_FPC_FPC_NUM_MASK;
regw(val, CCDC_FPC);
- dev_dbg(dev, "\nWriting 0x%x to FPC...\n", val);
+ dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to FPC...\n", val);
/* read the FPC register */
val = regr(CCDC_FPC) | CCDC_FPC_ENABLE;
regw(val, CCDC_FPC);
- dev_dbg(dev, "\nWriting 0x%x to FPC...\n", val);
+ dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to FPC...\n", val);
}
/*
@@ -509,13 +514,13 @@
*/
void ccdc_config_raw(void)
{
- struct ccdc_params_raw *params = &ccdc_hw_params_raw;
+ struct ccdc_params_raw *params = &ccdc_cfg.bayer;
struct ccdc_config_params_raw *config_params =
- &ccdc_hw_params_raw.config_params;
+ &ccdc_cfg.bayer.config_params;
unsigned int syn_mode = 0;
unsigned int val;
- dev_dbg(dev, "\nStarting ccdc_config_raw...");
+ dev_dbg(ccdc_cfg.dev, "\nStarting ccdc_config_raw...");
/* Reset CCDC */
ccdc_restore_defaults();
@@ -545,7 +550,7 @@
val = ((config_params->alaw.gama_wd &
CCDC_ALAW_GAMA_WD_MASK) | CCDC_ALAW_ENABLE);
regw(val, CCDC_ALAW);
- dev_dbg(dev, "\nWriting 0x%x to ALAW...\n", val);
+ dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to ALAW...\n", val);
}
/* Configure video window */
@@ -582,11 +587,11 @@
/* Write value in FMTCFG */
regw(val, CCDC_FMTCFG);
- dev_dbg(dev, "\nWriting 0x%x to FMTCFG...\n", val);
+ dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to FMTCFG...\n", val);
/* Configure the color pattern according to mt9t001 sensor */
regw(CCDC_COLPTN_VAL, CCDC_COLPTN);
- dev_dbg(dev, "\nWriting 0xBB11BB11 to COLPTN...\n");
+ dev_dbg(ccdc_cfg.dev, "\nWriting 0xBB11BB11 to COLPTN...\n");
/*
* Configure Data formatter(Video port) pixel selection
* (FMT_HORZ, FMT_VERT)
@@ -596,7 +601,7 @@
(params->win.width & CCDC_FMT_HORZ_FMTLNH_MASK);
regw(val, CCDC_FMT_HORZ);
- dev_dbg(dev, "\nWriting 0x%x to FMT_HORZ...\n", val);
+ dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to FMT_HORZ...\n", val);
val = (params->win.top & CCDC_FMT_VERT_FMTSLV_MASK)
<< CCDC_FMT_VERT_FMTSLV_SHIFT;
if (params->frm_fmt == CCDC_FRMFMT_PROGRESSIVE)
@@ -604,13 +609,13 @@
else
val |= (params->win.height >> 1) & CCDC_FMT_VERT_FMTLNV_MASK;
- dev_dbg(dev, "\nparams->win.height 0x%x ...\n",
+ dev_dbg(ccdc_cfg.dev, "\nparams->win.height 0x%x ...\n",
params->win.height);
regw(val, CCDC_FMT_VERT);
- dev_dbg(dev, "\nWriting 0x%x to FMT_VERT...\n", val);
+ dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to FMT_VERT...\n", val);
- dev_dbg(dev, "\nbelow regw(val, FMT_VERT)...");
+ dev_dbg(ccdc_cfg.dev, "\nbelow regw(val, FMT_VERT)...");
/*
* Configure Horizontal offset register. If pack 8 is enabled then
@@ -631,17 +636,17 @@
if (params->image_invert_enable) {
/* For intelace inverse mode */
regw(CCDC_INTERLACED_IMAGE_INVERT, CCDC_SDOFST);
- dev_dbg(dev, "\nWriting 0x4B6D to SDOFST...\n");
+ dev_dbg(ccdc_cfg.dev, "\nWriting 0x4B6D to SDOFST..\n");
}
else {
/* For intelace non inverse mode */
regw(CCDC_INTERLACED_NO_IMAGE_INVERT, CCDC_SDOFST);
- dev_dbg(dev, "\nWriting 0x0249 to SDOFST...\n");
+ dev_dbg(ccdc_cfg.dev, "\nWriting 0x0249 to SDOFST..\n");
}
} else if (params->frm_fmt == CCDC_FRMFMT_PROGRESSIVE) {
regw(CCDC_PROGRESSIVE_NO_IMAGE_INVERT, CCDC_SDOFST);
- dev_dbg(dev, "\nWriting 0x0000 to SDOFST...\n");
+ dev_dbg(ccdc_cfg.dev, "\nWriting 0x0000 to SDOFST...\n");
}
/*
@@ -662,18 +667,18 @@
val |= (params->win.left) & CCDC_VP_OUT_HORZ_ST_MASK;
regw(val, CCDC_VP_OUT);
- dev_dbg(dev, "\nWriting 0x%x to VP_OUT...\n", val);
+ dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to VP_OUT...\n", val);
regw(syn_mode, CCDC_SYN_MODE);
- dev_dbg(dev, "\nWriting 0x%x to SYN_MODE...\n", syn_mode);
+ dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to SYN_MODE...\n", syn_mode);
ccdc_sbl_reset();
- dev_dbg(dev, "\nend of ccdc_config_raw...");
+ dev_dbg(ccdc_cfg.dev, "\nend of ccdc_config_raw...");
ccdc_readregs();
}
static int ccdc_configure(void)
{
- if (ccdc_if_type == VPFE_RAW_BAYER)
+ if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
ccdc_config_raw();
else
ccdc_config_ycbcr();
@@ -682,24 +687,24 @@
static int ccdc_set_buftype(enum ccdc_buftype buf_type)
{
- if (ccdc_if_type == VPFE_RAW_BAYER)
- ccdc_hw_params_raw.buf_type = buf_type;
+ if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
+ ccdc_cfg.bayer.buf_type = buf_type;
else
- ccdc_hw_params_ycbcr.buf_type = buf_type;
+ ccdc_cfg.ycbcr.buf_type = buf_type;
return 0;
}
static enum ccdc_buftype ccdc_get_buftype(void)
{
- if (ccdc_if_type == VPFE_RAW_BAYER)
- return ccdc_hw_params_raw.buf_type;
- return ccdc_hw_params_ycbcr.buf_type;
+ if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
+ return ccdc_cfg.bayer.buf_type;
+ return ccdc_cfg.ycbcr.buf_type;
}
static int ccdc_enum_pix(u32 *pix, int i)
{
int ret = -EINVAL;
- if (ccdc_if_type == VPFE_RAW_BAYER) {
+ if (ccdc_cfg.if_type == VPFE_RAW_BAYER) {
if (i < ARRAY_SIZE(ccdc_raw_bayer_pix_formats)) {
*pix = ccdc_raw_bayer_pix_formats[i];
ret = 0;
@@ -715,17 +720,17 @@
static int ccdc_set_pixel_format(u32 pixfmt)
{
- if (ccdc_if_type == VPFE_RAW_BAYER) {
- ccdc_hw_params_raw.pix_fmt = CCDC_PIXFMT_RAW;
+ if (ccdc_cfg.if_type == VPFE_RAW_BAYER) {
+ ccdc_cfg.bayer.pix_fmt = CCDC_PIXFMT_RAW;
if (pixfmt == V4L2_PIX_FMT_SBGGR8)
- ccdc_hw_params_raw.config_params.alaw.enable = 1;
+ ccdc_cfg.bayer.config_params.alaw.enable = 1;
else if (pixfmt != V4L2_PIX_FMT_SBGGR16)
return -EINVAL;
} else {
if (pixfmt == V4L2_PIX_FMT_YUYV)
- ccdc_hw_params_ycbcr.pix_order = CCDC_PIXORDER_YCBYCR;
+ ccdc_cfg.ycbcr.pix_order = CCDC_PIXORDER_YCBYCR;
else if (pixfmt == V4L2_PIX_FMT_UYVY)
- ccdc_hw_params_ycbcr.pix_order = CCDC_PIXORDER_CBYCRY;
+ ccdc_cfg.ycbcr.pix_order = CCDC_PIXORDER_CBYCRY;
else
return -EINVAL;
}
@@ -734,17 +739,16 @@
static u32 ccdc_get_pixel_format(void)
{
- struct ccdc_a_law *alaw =
- &ccdc_hw_params_raw.config_params.alaw;
+ struct ccdc_a_law *alaw = &ccdc_cfg.bayer.config_params.alaw;
u32 pixfmt;
- if (ccdc_if_type == VPFE_RAW_BAYER)
+ if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
if (alaw->enable)
pixfmt = V4L2_PIX_FMT_SBGGR8;
else
pixfmt = V4L2_PIX_FMT_SBGGR16;
else {
- if (ccdc_hw_params_ycbcr.pix_order == CCDC_PIXORDER_YCBYCR)
+ if (ccdc_cfg.ycbcr.pix_order == CCDC_PIXORDER_YCBYCR)
pixfmt = V4L2_PIX_FMT_YUYV;
else
pixfmt = V4L2_PIX_FMT_UYVY;
@@ -754,53 +758,53 @@
static int ccdc_set_image_window(struct v4l2_rect *win)
{
- if (ccdc_if_type == VPFE_RAW_BAYER)
- ccdc_hw_params_raw.win = *win;
+ if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
+ ccdc_cfg.bayer.win = *win;
else
- ccdc_hw_params_ycbcr.win = *win;
+ ccdc_cfg.ycbcr.win = *win;
return 0;
}
static void ccdc_get_image_window(struct v4l2_rect *win)
{
- if (ccdc_if_type == VPFE_RAW_BAYER)
- *win = ccdc_hw_params_raw.win;
+ if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
+ *win = ccdc_cfg.bayer.win;
else
- *win = ccdc_hw_params_ycbcr.win;
+ *win = ccdc_cfg.ycbcr.win;
}
static unsigned int ccdc_get_line_length(void)
{
struct ccdc_config_params_raw *config_params =
- &ccdc_hw_params_raw.config_params;
+ &ccdc_cfg.bayer.config_params;
unsigned int len;
- if (ccdc_if_type == VPFE_RAW_BAYER) {
+ if (ccdc_cfg.if_type == VPFE_RAW_BAYER) {
if ((config_params->alaw.enable) ||
(config_params->data_sz == CCDC_DATA_8BITS))
- len = ccdc_hw_params_raw.win.width;
+ len = ccdc_cfg.bayer.win.width;
else
- len = ccdc_hw_params_raw.win.width * 2;
+ len = ccdc_cfg.bayer.win.width * 2;
} else
- len = ccdc_hw_params_ycbcr.win.width * 2;
+ len = ccdc_cfg.ycbcr.win.width * 2;
return ALIGN(len, 32);
}
static int ccdc_set_frame_format(enum ccdc_frmfmt frm_fmt)
{
- if (ccdc_if_type == VPFE_RAW_BAYER)
- ccdc_hw_params_raw.frm_fmt = frm_fmt;
+ if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
+ ccdc_cfg.bayer.frm_fmt = frm_fmt;
else
- ccdc_hw_params_ycbcr.frm_fmt = frm_fmt;
+ ccdc_cfg.ycbcr.frm_fmt = frm_fmt;
return 0;
}
static enum ccdc_frmfmt ccdc_get_frame_format(void)
{
- if (ccdc_if_type == VPFE_RAW_BAYER)
- return ccdc_hw_params_raw.frm_fmt;
+ if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
+ return ccdc_cfg.bayer.frm_fmt;
else
- return ccdc_hw_params_ycbcr.frm_fmt;
+ return ccdc_cfg.ycbcr.frm_fmt;
}
static int ccdc_getfid(void)
@@ -816,14 +820,14 @@
static int ccdc_set_hw_if_params(struct vpfe_hw_if_param *params)
{
- ccdc_if_type = params->if_type;
+ ccdc_cfg.if_type = params->if_type;
switch (params->if_type) {
case VPFE_BT656:
case VPFE_YCBCR_SYNC_16:
case VPFE_YCBCR_SYNC_8:
- ccdc_hw_params_ycbcr.vd_pol = params->vdpol;
- ccdc_hw_params_ycbcr.hd_pol = params->hdpol;
+ ccdc_cfg.ycbcr.vd_pol = params->vdpol;
+ ccdc_cfg.ycbcr.hd_pol = params->hdpol;
break;
default:
/* TODO add support for raw bayer here */
@@ -838,7 +842,6 @@
.hw_ops = {
.open = ccdc_open,
.close = ccdc_close,
- .set_ccdc_base = ccdc_set_ccdc_base,
.reset = ccdc_sbl_reset,
.enable = ccdc_enable,
.set_hw_if_params = ccdc_set_hw_if_params,
@@ -859,19 +862,105 @@
},
};
+static int __init dm644x_ccdc_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ int status = 0;
+
+ /*
+ * first try to register with vpfe. If not correct platform, then we
+ * don't have to iomap
+ */
+ status = vpfe_register_ccdc_device(&ccdc_hw_dev);
+ if (status < 0)
+ return status;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ status = -ENODEV;
+ goto fail_nores;
+ }
+
+ res = request_mem_region(res->start, resource_size(res), res->name);
+ if (!res) {
+ status = -EBUSY;
+ goto fail_nores;
+ }
+
+ ccdc_cfg.base_addr = ioremap_nocache(res->start, resource_size(res));
+ if (!ccdc_cfg.base_addr) {
+ status = -ENOMEM;
+ goto fail_nomem;
+ }
+
+ /* Get and enable Master clock */
+ ccdc_cfg.mclk = clk_get(&pdev->dev, "master");
+ if (IS_ERR(ccdc_cfg.mclk)) {
+ status = PTR_ERR(ccdc_cfg.mclk);
+ goto fail_nomap;
+ }
+ if (clk_enable(ccdc_cfg.mclk)) {
+ status = -ENODEV;
+ goto fail_mclk;
+ }
+
+ /* Get and enable Slave clock */
+ ccdc_cfg.sclk = clk_get(&pdev->dev, "slave");
+ if (IS_ERR(ccdc_cfg.sclk)) {
+ status = PTR_ERR(ccdc_cfg.sclk);
+ goto fail_mclk;
+ }
+ if (clk_enable(ccdc_cfg.sclk)) {
+ status = -ENODEV;
+ goto fail_sclk;
+ }
+ ccdc_cfg.dev = &pdev->dev;
+ printk(KERN_NOTICE "%s is registered with vpfe.\n", ccdc_hw_dev.name);
+ return 0;
+fail_sclk:
+ clk_put(ccdc_cfg.sclk);
+fail_mclk:
+ clk_put(ccdc_cfg.mclk);
+fail_nomap:
+ iounmap(ccdc_cfg.base_addr);
+fail_nomem:
+ release_mem_region(res->start, resource_size(res));
+fail_nores:
+ vpfe_unregister_ccdc_device(&ccdc_hw_dev);
+ return status;
+}
+
+static int dm644x_ccdc_remove(struct platform_device *pdev)
+{
+ struct resource *res;
+
+ clk_put(ccdc_cfg.mclk);
+ clk_put(ccdc_cfg.sclk);
+ iounmap(ccdc_cfg.base_addr);
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (res)
+ release_mem_region(res->start, resource_size(res));
+ vpfe_unregister_ccdc_device(&ccdc_hw_dev);
+ return 0;
+}
+
+static struct platform_driver dm644x_ccdc_driver = {
+ .driver = {
+ .name = "dm644x_ccdc",
+ .owner = THIS_MODULE,
+ },
+ .remove = __devexit_p(dm644x_ccdc_remove),
+ .probe = dm644x_ccdc_probe,
+};
+
static int __init dm644x_ccdc_init(void)
{
- printk(KERN_NOTICE "dm644x_ccdc_init\n");
- if (vpfe_register_ccdc_device(&ccdc_hw_dev) < 0)
- return -1;
- printk(KERN_NOTICE "%s is registered with vpfe.\n",
- ccdc_hw_dev.name);
- return 0;
+ return platform_driver_register(&dm644x_ccdc_driver);
}
static void __exit dm644x_ccdc_exit(void)
{
- vpfe_unregister_ccdc_device(&ccdc_hw_dev);
+ platform_driver_unregister(&dm644x_ccdc_driver);
}
module_init(dm644x_ccdc_init);
diff --git a/drivers/media/video/davinci/isif.c b/drivers/media/video/davinci/isif.c
new file mode 100644
index 0000000..29c29c6
--- /dev/null
+++ b/drivers/media/video/davinci/isif.c
@@ -0,0 +1,1172 @@
+/*
+ * Copyright (C) 2008-2009 Texas Instruments Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Image Sensor Interface (ISIF) driver
+ *
+ * This driver is for configuring the ISIF IP available on DM365 or any other
+ * TI SoCs. This is used for capturing yuv or bayer video or image data
+ * from a decoder or sensor. This IP is similar to the CCDC IP on DM355
+ * and DM6446, but with enhanced or additional ip blocks. The driver
+ * configures the ISIF upon commands from the vpfe bridge driver through
+ * ccdc_hw_device interface.
+ *
+ * TODO: 1) Raw bayer parameter settings and bayer capture
+ * 2) Add support for control ioctl
+ */
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
+#include <linux/videodev2.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <mach/mux.h>
+
+#include <media/davinci/isif.h>
+#include <media/davinci/vpss.h>
+
+#include "isif_regs.h"
+#include "ccdc_hw_device.h"
+
+/* Defaults for module configuration parameters */
+static struct isif_config_params_raw isif_config_defaults = {
+ .linearize = {
+ .en = 0,
+ .corr_shft = ISIF_NO_SHIFT,
+ .scale_fact = {1, 0},
+ },
+ .df_csc = {
+ .df_or_csc = 0,
+ .csc = {
+ .en = 0,
+ },
+ },
+ .dfc = {
+ .en = 0,
+ },
+ .bclamp = {
+ .en = 0,
+ },
+ .gain_offset = {
+ .gain = {
+ .r_ye = {1, 0},
+ .gr_cy = {1, 0},
+ .gb_g = {1, 0},
+ .b_mg = {1, 0},
+ },
+ },
+ .culling = {
+ .hcpat_odd = 0xff,
+ .hcpat_even = 0xff,
+ .vcpat = 0xff,
+ },
+ .compress = {
+ .alg = ISIF_ALAW,
+ },
+};
+
+/* ISIF operation configuration */
+static struct isif_oper_config {
+ struct device *dev;
+ enum vpfe_hw_if_type if_type;
+ struct isif_ycbcr_config ycbcr;
+ struct isif_params_raw bayer;
+ enum isif_data_pack data_pack;
+ /* Master clock */
+ struct clk *mclk;
+ /* ISIF base address */
+ void __iomem *base_addr;
+ /* ISIF Linear Table 0 */
+ void __iomem *linear_tbl0_addr;
+ /* ISIF Linear Table 1 */
+ void __iomem *linear_tbl1_addr;
+} isif_cfg = {
+ .ycbcr = {
+ .pix_fmt = CCDC_PIXFMT_YCBCR_8BIT,
+ .frm_fmt = CCDC_FRMFMT_INTERLACED,
+ .win = ISIF_WIN_NTSC,
+ .fid_pol = VPFE_PINPOL_POSITIVE,
+ .vd_pol = VPFE_PINPOL_POSITIVE,
+ .hd_pol = VPFE_PINPOL_POSITIVE,
+ .pix_order = CCDC_PIXORDER_CBYCRY,
+ .buf_type = CCDC_BUFTYPE_FLD_INTERLEAVED,
+ },
+ .bayer = {
+ .pix_fmt = CCDC_PIXFMT_RAW,
+ .frm_fmt = CCDC_FRMFMT_PROGRESSIVE,
+ .win = ISIF_WIN_VGA,
+ .fid_pol = VPFE_PINPOL_POSITIVE,
+ .vd_pol = VPFE_PINPOL_POSITIVE,
+ .hd_pol = VPFE_PINPOL_POSITIVE,
+ .gain = {
+ .r_ye = {1, 0},
+ .gr_cy = {1, 0},
+ .gb_g = {1, 0},
+ .b_mg = {1, 0},
+ },
+ .cfa_pat = ISIF_CFA_PAT_MOSAIC,
+ .data_msb = ISIF_BIT_MSB_11,
+ .config_params = {
+ .data_shift = ISIF_NO_SHIFT,
+ .col_pat_field0 = {
+ .olop = ISIF_GREEN_BLUE,
+ .olep = ISIF_BLUE,
+ .elop = ISIF_RED,
+ .elep = ISIF_GREEN_RED,
+ },
+ .col_pat_field1 = {
+ .olop = ISIF_GREEN_BLUE,
+ .olep = ISIF_BLUE,
+ .elop = ISIF_RED,
+ .elep = ISIF_GREEN_RED,
+ },
+ .test_pat_gen = 0,
+ },
+ },
+ .data_pack = ISIF_DATA_PACK8,
+};
+
+/* Raw Bayer formats */
+static const u32 isif_raw_bayer_pix_formats[] = {
+ V4L2_PIX_FMT_SBGGR8, V4L2_PIX_FMT_SBGGR16};
+
+/* Raw YUV formats */
+static const u32 isif_raw_yuv_pix_formats[] = {
+ V4L2_PIX_FMT_UYVY, V4L2_PIX_FMT_YUYV};
+
+/* register access routines */
+static inline u32 regr(u32 offset)
+{
+ return __raw_readl(isif_cfg.base_addr + offset);
+}
+
+static inline void regw(u32 val, u32 offset)
+{
+ __raw_writel(val, isif_cfg.base_addr + offset);
+}
+
+/* reg_modify() - read, modify and write register */
+static inline u32 reg_modify(u32 mask, u32 val, u32 offset)
+{
+ u32 new_val = (regr(offset) & ~mask) | (val & mask);
+
+ regw(new_val, offset);
+ return new_val;
+}
+
+static inline void regw_lin_tbl(u32 val, u32 offset, int i)
+{
+ if (!i)
+ __raw_writel(val, isif_cfg.linear_tbl0_addr + offset);
+ else
+ __raw_writel(val, isif_cfg.linear_tbl1_addr + offset);
+}
+
+static void isif_disable_all_modules(void)
+{
+ /* disable BC */
+ regw(0, CLAMPCFG);
+ /* disable vdfc */
+ regw(0, DFCCTL);
+ /* disable CSC */
+ regw(0, CSCCTL);
+ /* disable linearization */
+ regw(0, LINCFG0);
+ /* disable other modules here as they are supported */
+}
+
+static void isif_enable(int en)
+{
+ if (!en) {
+ /* Before disable isif, disable all ISIF modules */
+ isif_disable_all_modules();
+ /*
+ * wait for next VD. Assume lowest scan rate is 12 Hz. So
+ * 100 msec delay is good enough
+ */
+ msleep(100);
+ }
+ reg_modify(ISIF_SYNCEN_VDHDEN_MASK, en, SYNCEN);
+}
+
+static void isif_enable_output_to_sdram(int en)
+{
+ reg_modify(ISIF_SYNCEN_WEN_MASK, en << ISIF_SYNCEN_WEN_SHIFT, SYNCEN);
+}
+
+static void isif_config_culling(struct isif_cul *cul)
+{
+ u32 val;
+
+ /* Horizontal pattern */
+ val = (cul->hcpat_even << CULL_PAT_EVEN_LINE_SHIFT) | cul->hcpat_odd;
+ regw(val, CULH);
+
+ /* vertical pattern */
+ regw(cul->vcpat, CULV);
+
+ /* LPF */
+ reg_modify(ISIF_LPF_MASK << ISIF_LPF_SHIFT,
+ cul->en_lpf << ISIF_LPF_SHIFT, MODESET);
+}
+
+static void isif_config_gain_offset(void)
+{
+ struct isif_gain_offsets_adj *gain_off_p =
+ &isif_cfg.bayer.config_params.gain_offset;
+ u32 val;
+
+ val = (!!gain_off_p->gain_sdram_en << GAIN_SDRAM_EN_SHIFT) |
+ (!!gain_off_p->gain_ipipe_en << GAIN_IPIPE_EN_SHIFT) |
+ (!!gain_off_p->gain_h3a_en << GAIN_H3A_EN_SHIFT) |
+ (!!gain_off_p->offset_sdram_en << OFST_SDRAM_EN_SHIFT) |
+ (!!gain_off_p->offset_ipipe_en << OFST_IPIPE_EN_SHIFT) |
+ (!!gain_off_p->offset_h3a_en << OFST_H3A_EN_SHIFT);
+
+ reg_modify(GAIN_OFFSET_EN_MASK, val, CGAMMAWD);
+
+ val = (gain_off_p->gain.r_ye.integer << GAIN_INTEGER_SHIFT) |
+ gain_off_p->gain.r_ye.decimal;
+ regw(val, CRGAIN);
+
+ val = (gain_off_p->gain.gr_cy.integer << GAIN_INTEGER_SHIFT) |
+ gain_off_p->gain.gr_cy.decimal;
+ regw(val, CGRGAIN);
+
+ val = (gain_off_p->gain.gb_g.integer << GAIN_INTEGER_SHIFT) |
+ gain_off_p->gain.gb_g.decimal;
+ regw(val, CGBGAIN);
+
+ val = (gain_off_p->gain.b_mg.integer << GAIN_INTEGER_SHIFT) |
+ gain_off_p->gain.b_mg.decimal;
+ regw(val, CBGAIN);
+
+ regw(gain_off_p->offset, COFSTA);
+}
+
+static void isif_restore_defaults(void)
+{
+ enum vpss_ccdc_source_sel source = VPSS_CCDCIN;
+
+ dev_dbg(isif_cfg.dev, "\nstarting isif_restore_defaults...");
+ isif_cfg.bayer.config_params = isif_config_defaults;
+ /* Enable clock to ISIF, IPIPEIF and BL */
+ vpss_enable_clock(VPSS_CCDC_CLOCK, 1);
+ vpss_enable_clock(VPSS_IPIPEIF_CLOCK, 1);
+ vpss_enable_clock(VPSS_BL_CLOCK, 1);
+ /* Set default offset and gain */
+ isif_config_gain_offset();
+ vpss_select_ccdc_source(source);
+ dev_dbg(isif_cfg.dev, "\nEnd of isif_restore_defaults...");
+}
+
+static int isif_open(struct device *device)
+{
+ isif_restore_defaults();
+ return 0;
+}
+
+/* This function will configure the window size to be capture in ISIF reg */
+static void isif_setwin(struct v4l2_rect *image_win,
+ enum ccdc_frmfmt frm_fmt, int ppc)
+{
+ int horz_start, horz_nr_pixels;
+ int vert_start, vert_nr_lines;
+ int mid_img = 0;
+
+ dev_dbg(isif_cfg.dev, "\nStarting isif_setwin...");
+ /*
+ * ppc - per pixel count. indicates how many pixels per cell
+ * output to SDRAM. example, for ycbcr, it is one y and one c, so 2.
+ * raw capture this is 1
+ */
+ horz_start = image_win->left << (ppc - 1);
+ horz_nr_pixels = ((image_win->width) << (ppc - 1)) - 1;
+
+ /* Writing the horizontal info into the registers */
+ regw(horz_start & START_PX_HOR_MASK, SPH);
+ regw(horz_nr_pixels & NUM_PX_HOR_MASK, LNH);
+ vert_start = image_win->top;
+
+ if (frm_fmt == CCDC_FRMFMT_INTERLACED) {
+ vert_nr_lines = (image_win->height >> 1) - 1;
+ vert_start >>= 1;
+ /* To account for VD since line 0 doesn't have any data */
+ vert_start += 1;
+ } else {
+ /* To account for VD since line 0 doesn't have any data */
+ vert_start += 1;
+ vert_nr_lines = image_win->height - 1;
+ /* configure VDINT0 and VDINT1 */
+ mid_img = vert_start + (image_win->height / 2);
+ regw(mid_img, VDINT1);
+ }
+
+ regw(0, VDINT0);
+ regw(vert_start & START_VER_ONE_MASK, SLV0);
+ regw(vert_start & START_VER_TWO_MASK, SLV1);
+ regw(vert_nr_lines & NUM_LINES_VER, LNV);
+}
+
+static void isif_config_bclamp(struct isif_black_clamp *bc)
+{
+ u32 val;
+
+ /*
+ * DC Offset is always added to image data irrespective of bc enable
+ * status
+ */
+ regw(bc->dc_offset, CLDCOFST);
+
+ if (bc->en) {
+ val = bc->bc_mode_color << ISIF_BC_MODE_COLOR_SHIFT;
+
+ /* Enable BC and horizontal clamp caculation paramaters */
+ val = val | 1 | (bc->horz.mode << ISIF_HORZ_BC_MODE_SHIFT);
+
+ regw(val, CLAMPCFG);
+
+ if (bc->horz.mode != ISIF_HORZ_BC_DISABLE) {
+ /*
+ * Window count for calculation
+ * Base window selection
+ * pixel limit
+ * Horizontal size of window
+ * vertical size of the window
+ * Horizontal start position of the window
+ * Vertical start position of the window
+ */
+ val = bc->horz.win_count_calc |
+ ((!!bc->horz.base_win_sel_calc) <<
+ ISIF_HORZ_BC_WIN_SEL_SHIFT) |
+ ((!!bc->horz.clamp_pix_limit) <<
+ ISIF_HORZ_BC_PIX_LIMIT_SHIFT) |
+ (bc->horz.win_h_sz_calc <<
+ ISIF_HORZ_BC_WIN_H_SIZE_SHIFT) |
+ (bc->horz.win_v_sz_calc <<
+ ISIF_HORZ_BC_WIN_V_SIZE_SHIFT);
+ regw(val, CLHWIN0);
+
+ regw(bc->horz.win_start_h_calc, CLHWIN1);
+ regw(bc->horz.win_start_v_calc, CLHWIN2);
+ }
+
+ /* vertical clamp caculation paramaters */
+
+ /* Reset clamp value sel for previous line */
+ val |=
+ (bc->vert.reset_val_sel << ISIF_VERT_BC_RST_VAL_SEL_SHIFT) |
+ (bc->vert.line_ave_coef << ISIF_VERT_BC_LINE_AVE_COEF_SHIFT);
+ regw(val, CLVWIN0);
+
+ /* Optical Black horizontal start position */
+ regw(bc->vert.ob_start_h, CLVWIN1);
+ /* Optical Black vertical start position */
+ regw(bc->vert.ob_start_v, CLVWIN2);
+ /* Optical Black vertical size for calculation */
+ regw(bc->vert.ob_v_sz_calc, CLVWIN3);
+ /* Vertical start position for BC subtraction */
+ regw(bc->vert_start_sub, CLSV);
+ }
+}
+
+static void isif_config_linearization(struct isif_linearize *linearize)
+{
+ u32 val, i;
+
+ if (!linearize->en) {
+ regw(0, LINCFG0);
+ return;
+ }
+
+ /* shift value for correction & enable linearization (set lsb) */
+ val = (linearize->corr_shft << ISIF_LIN_CORRSFT_SHIFT) | 1;
+ regw(val, LINCFG0);
+
+ /* Scale factor */
+ val = ((!!linearize->scale_fact.integer) <<
+ ISIF_LIN_SCALE_FACT_INTEG_SHIFT) |
+ linearize->scale_fact.decimal;
+ regw(val, LINCFG1);
+
+ for (i = 0; i < ISIF_LINEAR_TAB_SIZE; i++) {
+ if (i % 2)
+ regw_lin_tbl(linearize->table[i], ((i >> 1) << 2), 1);
+ else
+ regw_lin_tbl(linearize->table[i], ((i >> 1) << 2), 0);
+ }
+}
+
+static int isif_config_dfc(struct isif_dfc *vdfc)
+{
+ /* initialize retries to loop for max ~ 250 usec */
+ u32 val, count, retries = loops_per_jiffy / (4000/HZ);
+ int i;
+
+ if (!vdfc->en)
+ return 0;
+
+ /* Correction mode */
+ val = (vdfc->corr_mode << ISIF_VDFC_CORR_MOD_SHIFT);
+
+ /* Correct whole line or partial */
+ if (vdfc->corr_whole_line)
+ val |= 1 << ISIF_VDFC_CORR_WHOLE_LN_SHIFT;
+
+ /* level shift value */
+ val |= vdfc->def_level_shift << ISIF_VDFC_LEVEL_SHFT_SHIFT;
+
+ regw(val, DFCCTL);
+
+ /* Defect saturation level */
+ regw(vdfc->def_sat_level, VDFSATLV);
+
+ regw(vdfc->table[0].pos_vert, DFCMEM0);
+ regw(vdfc->table[0].pos_horz, DFCMEM1);
+ if (vdfc->corr_mode == ISIF_VDFC_NORMAL ||
+ vdfc->corr_mode == ISIF_VDFC_HORZ_INTERPOL_IF_SAT) {
+ regw(vdfc->table[0].level_at_pos, DFCMEM2);
+ regw(vdfc->table[0].level_up_pixels, DFCMEM3);
+ regw(vdfc->table[0].level_low_pixels, DFCMEM4);
+ }
+
+ /* set DFCMARST and set DFCMWR */
+ val = regr(DFCMEMCTL) | (1 << ISIF_DFCMEMCTL_DFCMARST_SHIFT) | 1;
+ regw(val, DFCMEMCTL);
+
+ count = retries;
+ while (count && (regr(DFCMEMCTL) & 0x1))
+ count--;
+
+ if (!count) {
+ dev_dbg(isif_cfg.dev, "defect table write timeout !!!\n");
+ return -1;
+ }
+
+ for (i = 1; i < vdfc->num_vdefects; i++) {
+ regw(vdfc->table[i].pos_vert, DFCMEM0);
+ regw(vdfc->table[i].pos_horz, DFCMEM1);
+ if (vdfc->corr_mode == ISIF_VDFC_NORMAL ||
+ vdfc->corr_mode == ISIF_VDFC_HORZ_INTERPOL_IF_SAT) {
+ regw(vdfc->table[i].level_at_pos, DFCMEM2);
+ regw(vdfc->table[i].level_up_pixels, DFCMEM3);
+ regw(vdfc->table[i].level_low_pixels, DFCMEM4);
+ }
+ val = regr(DFCMEMCTL);
+ /* clear DFCMARST and set DFCMWR */
+ val &= ~BIT(ISIF_DFCMEMCTL_DFCMARST_SHIFT);
+ val |= 1;
+ regw(val, DFCMEMCTL);
+
+ count = retries;
+ while (count && (regr(DFCMEMCTL) & 0x1))
+ count--;
+
+ if (!count) {
+ dev_err(isif_cfg.dev,
+ "defect table write timeout !!!\n");
+ return -1;
+ }
+ }
+ if (vdfc->num_vdefects < ISIF_VDFC_TABLE_SIZE) {
+ /* Extra cycle needed */
+ regw(0, DFCMEM0);
+ regw(0x1FFF, DFCMEM1);
+ regw(1, DFCMEMCTL);
+ }
+
+ /* enable VDFC */
+ reg_modify((1 << ISIF_VDFC_EN_SHIFT), (1 << ISIF_VDFC_EN_SHIFT),
+ DFCCTL);
+ return 0;
+}
+
+static void isif_config_csc(struct isif_df_csc *df_csc)
+{
+ u32 val1 = 0, val2 = 0, i;
+
+ if (!df_csc->csc.en) {
+ regw(0, CSCCTL);
+ return;
+ }
+ for (i = 0; i < ISIF_CSC_NUM_COEFF; i++) {
+ if ((i % 2) == 0) {
+ /* CSCM - LSB */
+ val1 = (df_csc->csc.coeff[i].integer <<
+ ISIF_CSC_COEF_INTEG_SHIFT) |
+ df_csc->csc.coeff[i].decimal;
+ } else {
+
+ /* CSCM - MSB */
+ val2 = (df_csc->csc.coeff[i].integer <<
+ ISIF_CSC_COEF_INTEG_SHIFT) |
+ df_csc->csc.coeff[i].decimal;
+ val2 <<= ISIF_CSCM_MSB_SHIFT;
+ val2 |= val1;
+ regw(val2, (CSCM0 + ((i - 1) << 1)));
+ }
+ }
+
+ /* program the active area */
+ regw(df_csc->start_pix, FMTSPH);
+ /*
+ * one extra pixel as required for CSC. Actually number of
+ * pixel - 1 should be configured in this register. So we
+ * need to subtract 1 before writing to FMTSPH, but we will
+ * not do this since csc requires one extra pixel
+ */
+ regw(df_csc->num_pixels, FMTLNH);
+ regw(df_csc->start_line, FMTSLV);
+ /*
+ * one extra line as required for CSC. See reason documented for
+ * num_pixels
+ */
+ regw(df_csc->num_lines, FMTLNV);
+
+ /* Enable CSC */
+ regw(1, CSCCTL);
+}
+
+static int isif_config_raw(void)
+{
+ struct isif_params_raw *params = &isif_cfg.bayer;
+ struct isif_config_params_raw *module_params =
+ &isif_cfg.bayer.config_params;
+ struct vpss_pg_frame_size frame_size;
+ struct vpss_sync_pol sync;
+ u32 val;
+
+ dev_dbg(isif_cfg.dev, "\nStarting isif_config_raw..\n");
+
+ /*
+ * Configure CCDCFG register:-
+ * Set CCD Not to swap input since input is RAW data
+ * Set FID detection function to Latch at V-Sync
+ * Set WENLOG - isif valid area
+ * Set TRGSEL
+ * Set EXTRG
+ * Packed to 8 or 16 bits
+ */
+
+ val = ISIF_YCINSWP_RAW | ISIF_CCDCFG_FIDMD_LATCH_VSYNC |
+ ISIF_CCDCFG_WENLOG_AND | ISIF_CCDCFG_TRGSEL_WEN |
+ ISIF_CCDCFG_EXTRG_DISABLE | isif_cfg.data_pack;
+
+ dev_dbg(isif_cfg.dev, "Writing 0x%x to ...CCDCFG \n", val);
+ regw(val, CCDCFG);
+
+ /*
+ * Configure the vertical sync polarity(MODESET.VDPOL)
+ * Configure the horizontal sync polarity (MODESET.HDPOL)
+ * Configure frame id polarity (MODESET.FLDPOL)
+ * Configure data polarity
+ * Configure External WEN Selection
+ * Configure frame format(progressive or interlace)
+ * Configure pixel format (Input mode)
+ * Configure the data shift
+ */
+
+ val = ISIF_VDHDOUT_INPUT | (params->vd_pol << ISIF_VD_POL_SHIFT) |
+ (params->hd_pol << ISIF_HD_POL_SHIFT) |
+ (params->fid_pol << ISIF_FID_POL_SHIFT) |
+ (ISIF_DATAPOL_NORMAL << ISIF_DATAPOL_SHIFT) |
+ (ISIF_EXWEN_DISABLE << ISIF_EXWEN_SHIFT) |
+ (params->frm_fmt << ISIF_FRM_FMT_SHIFT) |
+ (params->pix_fmt << ISIF_INPUT_SHIFT) |
+ (params->config_params.data_shift << ISIF_DATASFT_SHIFT);
+
+ regw(val, MODESET);
+ dev_dbg(isif_cfg.dev, "Writing 0x%x to MODESET...\n", val);
+
+ /*
+ * Configure GAMMAWD register
+ * CFA pattern setting
+ */
+ val = params->cfa_pat << ISIF_GAMMAWD_CFA_SHIFT;
+
+ /* Gamma msb */
+ if (module_params->compress.alg == ISIF_ALAW)
+ val |= ISIF_ALAW_ENABLE;
+
+ val |= (params->data_msb << ISIF_ALAW_GAMA_WD_SHIFT);
+ regw(val, CGAMMAWD);
+
+ /* Configure DPCM compression settings */
+ if (module_params->compress.alg == ISIF_DPCM) {
+ val = BIT(ISIF_DPCM_EN_SHIFT) |
+ (module_params->compress.pred <<
+ ISIF_DPCM_PREDICTOR_SHIFT);
+ }
+
+ regw(val, MISC);
+
+ /* Configure Gain & Offset */
+ isif_config_gain_offset();
+
+ /* Configure Color pattern */
+ val = (params->config_params.col_pat_field0.olop) |
+ (params->config_params.col_pat_field0.olep << 2) |
+ (params->config_params.col_pat_field0.elop << 4) |
+ (params->config_params.col_pat_field0.elep << 6) |
+ (params->config_params.col_pat_field1.olop << 8) |
+ (params->config_params.col_pat_field1.olep << 10) |
+ (params->config_params.col_pat_field1.elop << 12) |
+ (params->config_params.col_pat_field1.elep << 14);
+ regw(val, CCOLP);
+ dev_dbg(isif_cfg.dev, "Writing %x to CCOLP ...\n", val);
+
+ /* Configure HSIZE register */
+ val = (!!params->horz_flip_en) << ISIF_HSIZE_FLIP_SHIFT;
+
+ /* calculate line offset in 32 bytes based on pack value */
+ if (isif_cfg.data_pack == ISIF_PACK_8BIT)
+ val |= ((params->win.width + 31) >> 5);
+ else if (isif_cfg.data_pack == ISIF_PACK_12BIT)
+ val |= (((params->win.width +
+ (params->win.width >> 2)) + 31) >> 5);
+ else
+ val |= (((params->win.width * 2) + 31) >> 5);
+ regw(val, HSIZE);
+
+ /* Configure SDOFST register */
+ if (params->frm_fmt == CCDC_FRMFMT_INTERLACED) {
+ if (params->image_invert_en) {
+ /* For interlace inverse mode */
+ regw(0x4B6D, SDOFST);
+ dev_dbg(isif_cfg.dev, "Writing 0x4B6D to SDOFST...\n");
+ } else {
+ /* For interlace non inverse mode */
+ regw(0x0B6D, SDOFST);
+ dev_dbg(isif_cfg.dev, "Writing 0x0B6D to SDOFST...\n");
+ }
+ } else if (params->frm_fmt == CCDC_FRMFMT_PROGRESSIVE) {
+ if (params->image_invert_en) {
+ /* For progressive inverse mode */
+ regw(0x4000, SDOFST);
+ dev_dbg(isif_cfg.dev, "Writing 0x4000 to SDOFST...\n");
+ } else {
+ /* For progressive non inverse mode */
+ regw(0x0000, SDOFST);
+ dev_dbg(isif_cfg.dev, "Writing 0x0000 to SDOFST...\n");
+ }
+ }
+
+ /* Configure video window */
+ isif_setwin(¶ms->win, params->frm_fmt, 1);
+
+ /* Configure Black Clamp */
+ isif_config_bclamp(&module_params->bclamp);
+
+ /* Configure Vertical Defection Pixel Correction */
+ if (isif_config_dfc(&module_params->dfc) < 0)
+ return -EFAULT;
+
+ if (!module_params->df_csc.df_or_csc)
+ /* Configure Color Space Conversion */
+ isif_config_csc(&module_params->df_csc);
+
+ isif_config_linearization(&module_params->linearize);
+
+ /* Configure Culling */
+ isif_config_culling(&module_params->culling);
+
+ /* Configure horizontal and vertical offsets(DFC,LSC,Gain) */
+ regw(module_params->horz_offset, DATAHOFST);
+ regw(module_params->vert_offset, DATAVOFST);
+
+ /* Setup test pattern if enabled */
+ if (params->config_params.test_pat_gen) {
+ /* Use the HD/VD pol settings from user */
+ sync.ccdpg_hdpol = params->hd_pol;
+ sync.ccdpg_vdpol = params->vd_pol;
+ dm365_vpss_set_sync_pol(sync);
+ frame_size.hlpfr = isif_cfg.bayer.win.width;
+ frame_size.pplen = isif_cfg.bayer.win.height;
+ dm365_vpss_set_pg_frame_size(frame_size);
+ vpss_select_ccdc_source(VPSS_PGLPBK);
+ }
+
+ dev_dbg(isif_cfg.dev, "\nEnd of isif_config_ycbcr...\n");
+ return 0;
+}
+
+static int isif_set_buftype(enum ccdc_buftype buf_type)
+{
+ if (isif_cfg.if_type == VPFE_RAW_BAYER)
+ isif_cfg.bayer.buf_type = buf_type;
+ else
+ isif_cfg.ycbcr.buf_type = buf_type;
+
+ return 0;
+
+}
+static enum ccdc_buftype isif_get_buftype(void)
+{
+ if (isif_cfg.if_type == VPFE_RAW_BAYER)
+ return isif_cfg.bayer.buf_type;
+
+ return isif_cfg.ycbcr.buf_type;
+}
+
+static int isif_enum_pix(u32 *pix, int i)
+{
+ int ret = -EINVAL;
+
+ if (isif_cfg.if_type == VPFE_RAW_BAYER) {
+ if (i < ARRAY_SIZE(isif_raw_bayer_pix_formats)) {
+ *pix = isif_raw_bayer_pix_formats[i];
+ ret = 0;
+ }
+ } else {
+ if (i < ARRAY_SIZE(isif_raw_yuv_pix_formats)) {
+ *pix = isif_raw_yuv_pix_formats[i];
+ ret = 0;
+ }
+ }
+
+ return ret;
+}
+
+static int isif_set_pixel_format(unsigned int pixfmt)
+{
+ if (isif_cfg.if_type == VPFE_RAW_BAYER) {
+ if (pixfmt == V4L2_PIX_FMT_SBGGR8) {
+ if ((isif_cfg.bayer.config_params.compress.alg !=
+ ISIF_ALAW) &&
+ (isif_cfg.bayer.config_params.compress.alg !=
+ ISIF_DPCM)) {
+ dev_dbg(isif_cfg.dev,
+ "Either configure A-Law or DPCM\n");
+ return -EINVAL;
+ }
+ isif_cfg.data_pack = ISIF_PACK_8BIT;
+ } else if (pixfmt == V4L2_PIX_FMT_SBGGR16) {
+ isif_cfg.bayer.config_params.compress.alg =
+ ISIF_NO_COMPRESSION;
+ isif_cfg.data_pack = ISIF_PACK_16BIT;
+ } else
+ return -EINVAL;
+ isif_cfg.bayer.pix_fmt = CCDC_PIXFMT_RAW;
+ } else {
+ if (pixfmt == V4L2_PIX_FMT_YUYV)
+ isif_cfg.ycbcr.pix_order = CCDC_PIXORDER_YCBYCR;
+ else if (pixfmt == V4L2_PIX_FMT_UYVY)
+ isif_cfg.ycbcr.pix_order = CCDC_PIXORDER_CBYCRY;
+ else
+ return -EINVAL;
+ isif_cfg.data_pack = ISIF_PACK_8BIT;
+ }
+ return 0;
+}
+
+static u32 isif_get_pixel_format(void)
+{
+ u32 pixfmt;
+
+ if (isif_cfg.if_type == VPFE_RAW_BAYER)
+ if (isif_cfg.bayer.config_params.compress.alg == ISIF_ALAW ||
+ isif_cfg.bayer.config_params.compress.alg == ISIF_DPCM)
+ pixfmt = V4L2_PIX_FMT_SBGGR8;
+ else
+ pixfmt = V4L2_PIX_FMT_SBGGR16;
+ else {
+ if (isif_cfg.ycbcr.pix_order == CCDC_PIXORDER_YCBYCR)
+ pixfmt = V4L2_PIX_FMT_YUYV;
+ else
+ pixfmt = V4L2_PIX_FMT_UYVY;
+ }
+ return pixfmt;
+}
+
+static int isif_set_image_window(struct v4l2_rect *win)
+{
+ if (isif_cfg.if_type == VPFE_RAW_BAYER) {
+ isif_cfg.bayer.win.top = win->top;
+ isif_cfg.bayer.win.left = win->left;
+ isif_cfg.bayer.win.width = win->width;
+ isif_cfg.bayer.win.height = win->height;
+ } else {
+ isif_cfg.ycbcr.win.top = win->top;
+ isif_cfg.ycbcr.win.left = win->left;
+ isif_cfg.ycbcr.win.width = win->width;
+ isif_cfg.ycbcr.win.height = win->height;
+ }
+ return 0;
+}
+
+static void isif_get_image_window(struct v4l2_rect *win)
+{
+ if (isif_cfg.if_type == VPFE_RAW_BAYER)
+ *win = isif_cfg.bayer.win;
+ else
+ *win = isif_cfg.ycbcr.win;
+}
+
+static unsigned int isif_get_line_length(void)
+{
+ unsigned int len;
+
+ if (isif_cfg.if_type == VPFE_RAW_BAYER) {
+ if (isif_cfg.data_pack == ISIF_PACK_8BIT)
+ len = ((isif_cfg.bayer.win.width));
+ else if (isif_cfg.data_pack == ISIF_PACK_12BIT)
+ len = (((isif_cfg.bayer.win.width * 2) +
+ (isif_cfg.bayer.win.width >> 2)));
+ else
+ len = (((isif_cfg.bayer.win.width * 2)));
+ } else
+ len = (((isif_cfg.ycbcr.win.width * 2)));
+ return ALIGN(len, 32);
+}
+
+static int isif_set_frame_format(enum ccdc_frmfmt frm_fmt)
+{
+ if (isif_cfg.if_type == VPFE_RAW_BAYER)
+ isif_cfg.bayer.frm_fmt = frm_fmt;
+ else
+ isif_cfg.ycbcr.frm_fmt = frm_fmt;
+ return 0;
+}
+static enum ccdc_frmfmt isif_get_frame_format(void)
+{
+ if (isif_cfg.if_type == VPFE_RAW_BAYER)
+ return isif_cfg.bayer.frm_fmt;
+ return isif_cfg.ycbcr.frm_fmt;
+}
+
+static int isif_getfid(void)
+{
+ return (regr(MODESET) >> 15) & 0x1;
+}
+
+/* misc operations */
+static void isif_setfbaddr(unsigned long addr)
+{
+ regw((addr >> 21) & 0x07ff, CADU);
+ regw((addr >> 5) & 0x0ffff, CADL);
+}
+
+static int isif_set_hw_if_params(struct vpfe_hw_if_param *params)
+{
+ isif_cfg.if_type = params->if_type;
+
+ switch (params->if_type) {
+ case VPFE_BT656:
+ case VPFE_BT656_10BIT:
+ case VPFE_YCBCR_SYNC_8:
+ isif_cfg.ycbcr.pix_fmt = CCDC_PIXFMT_YCBCR_8BIT;
+ isif_cfg.ycbcr.pix_order = CCDC_PIXORDER_CBYCRY;
+ break;
+ case VPFE_BT1120:
+ case VPFE_YCBCR_SYNC_16:
+ isif_cfg.ycbcr.pix_fmt = CCDC_PIXFMT_YCBCR_16BIT;
+ isif_cfg.ycbcr.pix_order = CCDC_PIXORDER_CBYCRY;
+ break;
+ case VPFE_RAW_BAYER:
+ isif_cfg.bayer.pix_fmt = CCDC_PIXFMT_RAW;
+ break;
+ default:
+ dev_dbg(isif_cfg.dev, "Invalid interface type\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/* This function will configure ISIF for YCbCr parameters. */
+static int isif_config_ycbcr(void)
+{
+ struct isif_ycbcr_config *params = &isif_cfg.ycbcr;
+ struct vpss_pg_frame_size frame_size;
+ u32 modeset = 0, ccdcfg = 0;
+ struct vpss_sync_pol sync;
+
+ dev_dbg(isif_cfg.dev, "\nStarting isif_config_ycbcr...");
+
+ /* configure pixel format or input mode */
+ modeset = modeset | (params->pix_fmt << ISIF_INPUT_SHIFT) |
+ (params->frm_fmt << ISIF_FRM_FMT_SHIFT) |
+ (params->fid_pol << ISIF_FID_POL_SHIFT) |
+ (params->hd_pol << ISIF_HD_POL_SHIFT) |
+ (params->vd_pol << ISIF_VD_POL_SHIFT);
+
+ /* pack the data to 8-bit ISIFCFG */
+ switch (isif_cfg.if_type) {
+ case VPFE_BT656:
+ if (params->pix_fmt != CCDC_PIXFMT_YCBCR_8BIT) {
+ dev_dbg(isif_cfg.dev, "Invalid pix_fmt(input mode)\n");
+ return -EINVAL;
+ }
+ modeset |= (VPFE_PINPOL_NEGATIVE << ISIF_VD_POL_SHIFT);
+ regw(3, REC656IF);
+ ccdcfg = ccdcfg | ISIF_DATA_PACK8 | ISIF_YCINSWP_YCBCR;
+ break;
+ case VPFE_BT656_10BIT:
+ if (params->pix_fmt != CCDC_PIXFMT_YCBCR_8BIT) {
+ dev_dbg(isif_cfg.dev, "Invalid pix_fmt(input mode)\n");
+ return -EINVAL;
+ }
+ /* setup BT.656, embedded sync */
+ regw(3, REC656IF);
+ /* enable 10 bit mode in ccdcfg */
+ ccdcfg = ccdcfg | ISIF_DATA_PACK8 | ISIF_YCINSWP_YCBCR |
+ ISIF_BW656_ENABLE;
+ break;
+ case VPFE_BT1120:
+ if (params->pix_fmt != CCDC_PIXFMT_YCBCR_16BIT) {
+ dev_dbg(isif_cfg.dev, "Invalid pix_fmt(input mode)\n");
+ return -EINVAL;
+ }
+ regw(3, REC656IF);
+ break;
+
+ case VPFE_YCBCR_SYNC_8:
+ ccdcfg |= ISIF_DATA_PACK8;
+ ccdcfg |= ISIF_YCINSWP_YCBCR;
+ if (params->pix_fmt != CCDC_PIXFMT_YCBCR_8BIT) {
+ dev_dbg(isif_cfg.dev, "Invalid pix_fmt(input mode)\n");
+ return -EINVAL;
+ }
+ break;
+ case VPFE_YCBCR_SYNC_16:
+ if (params->pix_fmt != CCDC_PIXFMT_YCBCR_16BIT) {
+ dev_dbg(isif_cfg.dev, "Invalid pix_fmt(input mode)\n");
+ return -EINVAL;
+ }
+ break;
+ default:
+ /* should never come here */
+ dev_dbg(isif_cfg.dev, "Invalid interface type\n");
+ return -EINVAL;
+ }
+
+ regw(modeset, MODESET);
+
+ /* Set up pix order */
+ ccdcfg |= params->pix_order << ISIF_PIX_ORDER_SHIFT;
+
+ regw(ccdcfg, CCDCFG);
+
+ /* configure video window */
+ if ((isif_cfg.if_type == VPFE_BT1120) ||
+ (isif_cfg.if_type == VPFE_YCBCR_SYNC_16))
+ isif_setwin(¶ms->win, params->frm_fmt, 1);
+ else
+ isif_setwin(¶ms->win, params->frm_fmt, 2);
+
+ /*
+ * configure the horizontal line offset
+ * this is done by rounding up width to a multiple of 16 pixels
+ * and multiply by two to account for y:cb:cr 4:2:2 data
+ */
+ regw(((((params->win.width * 2) + 31) & 0xffffffe0) >> 5), HSIZE);
+
+ /* configure the memory line offset */
+ if ((params->frm_fmt == CCDC_FRMFMT_INTERLACED) &&
+ (params->buf_type == CCDC_BUFTYPE_FLD_INTERLEAVED))
+ /* two fields are interleaved in memory */
+ regw(0x00000249, SDOFST);
+
+ /* Setup test pattern if enabled */
+ if (isif_cfg.bayer.config_params.test_pat_gen) {
+ sync.ccdpg_hdpol = params->hd_pol;
+ sync.ccdpg_vdpol = params->vd_pol;
+ dm365_vpss_set_sync_pol(sync);
+ dm365_vpss_set_pg_frame_size(frame_size);
+ }
+ return 0;
+}
+
+static int isif_configure(void)
+{
+ if (isif_cfg.if_type == VPFE_RAW_BAYER)
+ return isif_config_raw();
+ return isif_config_ycbcr();
+}
+
+static int isif_close(struct device *device)
+{
+ /* copy defaults to module params */
+ isif_cfg.bayer.config_params = isif_config_defaults;
+ return 0;
+}
+
+static struct ccdc_hw_device isif_hw_dev = {
+ .name = "ISIF",
+ .owner = THIS_MODULE,
+ .hw_ops = {
+ .open = isif_open,
+ .close = isif_close,
+ .enable = isif_enable,
+ .enable_out_to_sdram = isif_enable_output_to_sdram,
+ .set_hw_if_params = isif_set_hw_if_params,
+ .configure = isif_configure,
+ .set_buftype = isif_set_buftype,
+ .get_buftype = isif_get_buftype,
+ .enum_pix = isif_enum_pix,
+ .set_pixel_format = isif_set_pixel_format,
+ .get_pixel_format = isif_get_pixel_format,
+ .set_frame_format = isif_set_frame_format,
+ .get_frame_format = isif_get_frame_format,
+ .set_image_window = isif_set_image_window,
+ .get_image_window = isif_get_image_window,
+ .get_line_length = isif_get_line_length,
+ .setfbaddr = isif_setfbaddr,
+ .getfid = isif_getfid,
+ },
+};
+
+static int __init isif_probe(struct platform_device *pdev)
+{
+ void (*setup_pinmux)(void);
+ struct resource *res;
+ void *__iomem addr;
+ int status = 0, i;
+
+ /*
+ * first try to register with vpfe. If not correct platform, then we
+ * don't have to iomap
+ */
+ status = vpfe_register_ccdc_device(&isif_hw_dev);
+ if (status < 0)
+ return status;
+
+ /* Get and enable Master clock */
+ isif_cfg.mclk = clk_get(&pdev->dev, "master");
+ if (IS_ERR(isif_cfg.mclk)) {
+ status = PTR_ERR(isif_cfg.mclk);
+ goto fail_mclk;
+ }
+ if (clk_enable(isif_cfg.mclk)) {
+ status = -ENODEV;
+ goto fail_mclk;
+ }
+
+ /* Platform data holds setup_pinmux function ptr */
+ if (NULL == pdev->dev.platform_data) {
+ status = -ENODEV;
+ goto fail_mclk;
+ }
+ setup_pinmux = pdev->dev.platform_data;
+ /*
+ * setup Mux configuration for ccdc which may be different for
+ * different SoCs using this CCDC
+ */
+ setup_pinmux();
+
+ i = 0;
+ /* Get the ISIF base address, linearization table0 and table1 addr. */
+ while (i < 3) {
+ res = platform_get_resource(pdev, IORESOURCE_MEM, i);
+ if (!res) {
+ status = -ENODEV;
+ goto fail_nobase_res;
+ }
+ res = request_mem_region(res->start, resource_size(res),
+ res->name);
+ if (!res) {
+ status = -EBUSY;
+ goto fail_nobase_res;
+ }
+ addr = ioremap_nocache(res->start, resource_size(res));
+ if (!addr) {
+ status = -ENOMEM;
+ goto fail_base_iomap;
+ }
+ switch (i) {
+ case 0:
+ /* ISIF base address */
+ isif_cfg.base_addr = addr;
+ break;
+ case 1:
+ /* ISIF linear tbl0 address */
+ isif_cfg.linear_tbl0_addr = addr;
+ break;
+ default:
+ /* ISIF linear tbl0 address */
+ isif_cfg.linear_tbl1_addr = addr;
+ break;
+ }
+ i++;
+ }
+ isif_cfg.dev = &pdev->dev;
+
+ printk(KERN_NOTICE "%s is registered with vpfe.\n",
+ isif_hw_dev.name);
+ return 0;
+fail_base_iomap:
+ release_mem_region(res->start, resource_size(res));
+ i--;
+fail_nobase_res:
+ if (isif_cfg.base_addr)
+ iounmap(isif_cfg.base_addr);
+ if (isif_cfg.linear_tbl0_addr)
+ iounmap(isif_cfg.linear_tbl0_addr);
+
+ while (i >= 0) {
+ res = platform_get_resource(pdev, IORESOURCE_MEM, i);
+ release_mem_region(res->start, resource_size(res));
+ i--;
+ }
+fail_mclk:
+ clk_put(isif_cfg.mclk);
+ vpfe_unregister_ccdc_device(&isif_hw_dev);
+ return status;
+}
+
+static int isif_remove(struct platform_device *pdev)
+{
+ struct resource *res;
+ int i = 0;
+
+ iounmap(isif_cfg.base_addr);
+ iounmap(isif_cfg.linear_tbl0_addr);
+ iounmap(isif_cfg.linear_tbl1_addr);
+ while (i < 3) {
+ res = platform_get_resource(pdev, IORESOURCE_MEM, i);
+ if (res)
+ release_mem_region(res->start, resource_size(res));
+ i++;
+ }
+ vpfe_unregister_ccdc_device(&isif_hw_dev);
+ return 0;
+}
+
+static struct platform_driver isif_driver = {
+ .driver = {
+ .name = "isif",
+ .owner = THIS_MODULE,
+ },
+ .remove = __devexit_p(isif_remove),
+ .probe = isif_probe,
+};
+
+static int __init isif_init(void)
+{
+ return platform_driver_register(&isif_driver);
+}
+
+static void isif_exit(void)
+{
+ platform_driver_unregister(&isif_driver);
+}
+
+module_init(isif_init);
+module_exit(isif_exit);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/video/davinci/isif_regs.h b/drivers/media/video/davinci/isif_regs.h
new file mode 100644
index 0000000..f7b8893
--- /dev/null
+++ b/drivers/media/video/davinci/isif_regs.h
@@ -0,0 +1,269 @@
+/*
+ * Copyright (C) 2008-2009 Texas Instruments Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef _ISIF_REGS_H
+#define _ISIF_REGS_H
+
+/* ISIF registers relative offsets */
+#define SYNCEN 0x00
+#define MODESET 0x04
+#define HDW 0x08
+#define VDW 0x0c
+#define PPLN 0x10
+#define LPFR 0x14
+#define SPH 0x18
+#define LNH 0x1c
+#define SLV0 0x20
+#define SLV1 0x24
+#define LNV 0x28
+#define CULH 0x2c
+#define CULV 0x30
+#define HSIZE 0x34
+#define SDOFST 0x38
+#define CADU 0x3c
+#define CADL 0x40
+#define LINCFG0 0x44
+#define LINCFG1 0x48
+#define CCOLP 0x4c
+#define CRGAIN 0x50
+#define CGRGAIN 0x54
+#define CGBGAIN 0x58
+#define CBGAIN 0x5c
+#define COFSTA 0x60
+#define FLSHCFG0 0x64
+#define FLSHCFG1 0x68
+#define FLSHCFG2 0x6c
+#define VDINT0 0x70
+#define VDINT1 0x74
+#define VDINT2 0x78
+#define MISC 0x7c
+#define CGAMMAWD 0x80
+#define REC656IF 0x84
+#define CCDCFG 0x88
+/*****************************************************
+* Defect Correction registers
+*****************************************************/
+#define DFCCTL 0x8c
+#define VDFSATLV 0x90
+#define DFCMEMCTL 0x94
+#define DFCMEM0 0x98
+#define DFCMEM1 0x9c
+#define DFCMEM2 0xa0
+#define DFCMEM3 0xa4
+#define DFCMEM4 0xa8
+/****************************************************
+* Black Clamp registers
+****************************************************/
+#define CLAMPCFG 0xac
+#define CLDCOFST 0xb0
+#define CLSV 0xb4
+#define CLHWIN0 0xb8
+#define CLHWIN1 0xbc
+#define CLHWIN2 0xc0
+#define CLVRV 0xc4
+#define CLVWIN0 0xc8
+#define CLVWIN1 0xcc
+#define CLVWIN2 0xd0
+#define CLVWIN3 0xd4
+/****************************************************
+* Lense Shading Correction
+****************************************************/
+#define DATAHOFST 0xd8
+#define DATAVOFST 0xdc
+#define LSCHVAL 0xe0
+#define LSCVVAL 0xe4
+#define TWODLSCCFG 0xe8
+#define TWODLSCOFST 0xec
+#define TWODLSCINI 0xf0
+#define TWODLSCGRBU 0xf4
+#define TWODLSCGRBL 0xf8
+#define TWODLSCGROF 0xfc
+#define TWODLSCORBU 0x100
+#define TWODLSCORBL 0x104
+#define TWODLSCOROF 0x108
+#define TWODLSCIRQEN 0x10c
+#define TWODLSCIRQST 0x110
+/****************************************************
+* Data formatter
+****************************************************/
+#define FMTCFG 0x114
+#define FMTPLEN 0x118
+#define FMTSPH 0x11c
+#define FMTLNH 0x120
+#define FMTSLV 0x124
+#define FMTLNV 0x128
+#define FMTRLEN 0x12c
+#define FMTHCNT 0x130
+#define FMTAPTR_BASE 0x134
+/* Below macro for addresses FMTAPTR0 - FMTAPTR15 */
+#define FMTAPTR(i) (FMTAPTR_BASE + (i * 4))
+#define FMTPGMVF0 0x174
+#define FMTPGMVF1 0x178
+#define FMTPGMAPU0 0x17c
+#define FMTPGMAPU1 0x180
+#define FMTPGMAPS0 0x184
+#define FMTPGMAPS1 0x188
+#define FMTPGMAPS2 0x18c
+#define FMTPGMAPS3 0x190
+#define FMTPGMAPS4 0x194
+#define FMTPGMAPS5 0x198
+#define FMTPGMAPS6 0x19c
+#define FMTPGMAPS7 0x1a0
+/************************************************
+* Color Space Converter
+************************************************/
+#define CSCCTL 0x1a4
+#define CSCM0 0x1a8
+#define CSCM1 0x1ac
+#define CSCM2 0x1b0
+#define CSCM3 0x1b4
+#define CSCM4 0x1b8
+#define CSCM5 0x1bc
+#define CSCM6 0x1c0
+#define CSCM7 0x1c4
+#define OBWIN0 0x1c8
+#define OBWIN1 0x1cc
+#define OBWIN2 0x1d0
+#define OBWIN3 0x1d4
+#define OBVAL0 0x1d8
+#define OBVAL1 0x1dc
+#define OBVAL2 0x1e0
+#define OBVAL3 0x1e4
+#define OBVAL4 0x1e8
+#define OBVAL5 0x1ec
+#define OBVAL6 0x1f0
+#define OBVAL7 0x1f4
+#define CLKCTL 0x1f8
+
+/* Masks & Shifts below */
+#define START_PX_HOR_MASK 0x7FFF
+#define NUM_PX_HOR_MASK 0x7FFF
+#define START_VER_ONE_MASK 0x7FFF
+#define START_VER_TWO_MASK 0x7FFF
+#define NUM_LINES_VER 0x7FFF
+
+/* gain - offset masks */
+#define GAIN_INTEGER_SHIFT 9
+#define OFFSET_MASK 0xFFF
+#define GAIN_SDRAM_EN_SHIFT 12
+#define GAIN_IPIPE_EN_SHIFT 13
+#define GAIN_H3A_EN_SHIFT 14
+#define OFST_SDRAM_EN_SHIFT 8
+#define OFST_IPIPE_EN_SHIFT 9
+#define OFST_H3A_EN_SHIFT 10
+#define GAIN_OFFSET_EN_MASK 0x7700
+
+/* Culling */
+#define CULL_PAT_EVEN_LINE_SHIFT 8
+
+/* CCDCFG register */
+#define ISIF_YCINSWP_RAW (0x00 << 4)
+#define ISIF_YCINSWP_YCBCR (0x01 << 4)
+#define ISIF_CCDCFG_FIDMD_LATCH_VSYNC (0x00 << 6)
+#define ISIF_CCDCFG_WENLOG_AND (0x00 << 8)
+#define ISIF_CCDCFG_TRGSEL_WEN (0x00 << 9)
+#define ISIF_CCDCFG_EXTRG_DISABLE (0x00 << 10)
+#define ISIF_LATCH_ON_VSYNC_DISABLE (0x01 << 15)
+#define ISIF_LATCH_ON_VSYNC_ENABLE (0x00 << 15)
+#define ISIF_DATA_PACK_MASK 3
+#define ISIF_DATA_PACK16 0
+#define ISIF_DATA_PACK12 1
+#define ISIF_DATA_PACK8 2
+#define ISIF_PIX_ORDER_SHIFT 11
+#define ISIF_BW656_ENABLE (0x01 << 5)
+
+/* MODESET registers */
+#define ISIF_VDHDOUT_INPUT (0x00 << 0)
+#define ISIF_INPUT_SHIFT 12
+#define ISIF_RAW_INPUT_MODE 0
+#define ISIF_FID_POL_SHIFT 4
+#define ISIF_HD_POL_SHIFT 3
+#define ISIF_VD_POL_SHIFT 2
+#define ISIF_DATAPOL_NORMAL 0
+#define ISIF_DATAPOL_SHIFT 6
+#define ISIF_EXWEN_DISABLE 0
+#define ISIF_EXWEN_SHIFT 5
+#define ISIF_FRM_FMT_SHIFT 7
+#define ISIF_DATASFT_SHIFT 8
+#define ISIF_LPF_SHIFT 14
+#define ISIF_LPF_MASK 1
+
+/* GAMMAWD registers */
+#define ISIF_ALAW_GAMA_WD_MASK 0xF
+#define ISIF_ALAW_GAMA_WD_SHIFT 1
+#define ISIF_ALAW_ENABLE 1
+#define ISIF_GAMMAWD_CFA_SHIFT 5
+
+/* HSIZE registers */
+#define ISIF_HSIZE_FLIP_MASK 1
+#define ISIF_HSIZE_FLIP_SHIFT 12
+
+/* MISC registers */
+#define ISIF_DPCM_EN_SHIFT 12
+#define ISIF_DPCM_PREDICTOR_SHIFT 13
+
+/* Black clamp related */
+#define ISIF_BC_MODE_COLOR_SHIFT 4
+#define ISIF_HORZ_BC_MODE_SHIFT 1
+#define ISIF_HORZ_BC_WIN_SEL_SHIFT 5
+#define ISIF_HORZ_BC_PIX_LIMIT_SHIFT 6
+#define ISIF_HORZ_BC_WIN_H_SIZE_SHIFT 8
+#define ISIF_HORZ_BC_WIN_V_SIZE_SHIFT 12
+#define ISIF_VERT_BC_RST_VAL_SEL_SHIFT 4
+#define ISIF_VERT_BC_LINE_AVE_COEF_SHIFT 8
+
+/* VDFC registers */
+#define ISIF_VDFC_EN_SHIFT 4
+#define ISIF_VDFC_CORR_MOD_SHIFT 5
+#define ISIF_VDFC_CORR_WHOLE_LN_SHIFT 7
+#define ISIF_VDFC_LEVEL_SHFT_SHIFT 8
+#define ISIF_VDFC_POS_MASK 0x1FFF
+#define ISIF_DFCMEMCTL_DFCMARST_SHIFT 2
+
+/* CSC registers */
+#define ISIF_CSC_COEF_INTEG_MASK 7
+#define ISIF_CSC_COEF_DECIMAL_MASK 0x1f
+#define ISIF_CSC_COEF_INTEG_SHIFT 5
+#define ISIF_CSCM_MSB_SHIFT 8
+#define ISIF_DF_CSC_SPH_MASK 0x1FFF
+#define ISIF_DF_CSC_LNH_MASK 0x1FFF
+#define ISIF_DF_CSC_SLV_MASK 0x1FFF
+#define ISIF_DF_CSC_LNV_MASK 0x1FFF
+#define ISIF_DF_NUMLINES 0x7FFF
+#define ISIF_DF_NUMPIX 0x1FFF
+
+/* Offsets for LSC/DFC/Gain */
+#define ISIF_DATA_H_OFFSET_MASK 0x1FFF
+#define ISIF_DATA_V_OFFSET_MASK 0x1FFF
+
+/* Linearization */
+#define ISIF_LIN_CORRSFT_SHIFT 4
+#define ISIF_LIN_SCALE_FACT_INTEG_SHIFT 10
+
+
+/* Pattern registers */
+#define ISIF_PG_EN (1 << 3)
+#define ISIF_SEL_PG_SRC (3 << 4)
+#define ISIF_PG_VD_POL_SHIFT 0
+#define ISIF_PG_HD_POL_SHIFT 1
+
+/*random other junk*/
+#define ISIF_SYNCEN_VDHDEN_MASK (1 << 0)
+#define ISIF_SYNCEN_WEN_MASK (1 << 1)
+#define ISIF_SYNCEN_WEN_SHIFT 1
+
+#endif
diff --git a/drivers/media/video/davinci/vpfe_capture.c b/drivers/media/video/davinci/vpfe_capture.c
index de22bc9..885cd54 100644
--- a/drivers/media/video/davinci/vpfe_capture.c
+++ b/drivers/media/video/davinci/vpfe_capture.c
@@ -107,9 +107,6 @@
int vpfe_probed;
/* name of ccdc device */
char name[32];
- /* for storing mem maps for CCDC */
- int ccdc_addr_size;
- void *__iomem ccdc_addr;
};
/* data structures */
@@ -229,7 +226,6 @@
BUG_ON(!dev->hw_ops.set_image_window);
BUG_ON(!dev->hw_ops.get_image_window);
BUG_ON(!dev->hw_ops.get_line_length);
- BUG_ON(!dev->hw_ops.setfbaddr);
BUG_ON(!dev->hw_ops.getfid);
mutex_lock(&ccdc_lock);
@@ -240,25 +236,23 @@
* walk through it during vpfe probe
*/
printk(KERN_ERR "vpfe capture not initialized\n");
- ret = -1;
+ ret = -EFAULT;
goto unlock;
}
if (strcmp(dev->name, ccdc_cfg->name)) {
/* ignore this ccdc */
- ret = -1;
+ ret = -EINVAL;
goto unlock;
}
if (ccdc_dev) {
printk(KERN_ERR "ccdc already registered\n");
- ret = -1;
+ ret = -EINVAL;
goto unlock;
}
ccdc_dev = dev;
- dev->hw_ops.set_ccdc_base(ccdc_cfg->ccdc_addr,
- ccdc_cfg->ccdc_addr_size);
unlock:
mutex_unlock(&ccdc_lock);
return ret;
@@ -1786,61 +1780,6 @@
return vpfe_dev;
}
-static void vpfe_disable_clock(struct vpfe_device *vpfe_dev)
-{
- struct vpfe_config *vpfe_cfg = vpfe_dev->cfg;
-
- clk_disable(vpfe_cfg->vpssclk);
- clk_put(vpfe_cfg->vpssclk);
- clk_disable(vpfe_cfg->slaveclk);
- clk_put(vpfe_cfg->slaveclk);
- v4l2_info(vpfe_dev->pdev->driver,
- "vpfe vpss master & slave clocks disabled\n");
-}
-
-static int vpfe_enable_clock(struct vpfe_device *vpfe_dev)
-{
- struct vpfe_config *vpfe_cfg = vpfe_dev->cfg;
- int ret = -ENOENT;
-
- vpfe_cfg->vpssclk = clk_get(vpfe_dev->pdev, "vpss_master");
- if (NULL == vpfe_cfg->vpssclk) {
- v4l2_err(vpfe_dev->pdev->driver, "No clock defined for"
- "vpss_master\n");
- return ret;
- }
-
- if (clk_enable(vpfe_cfg->vpssclk)) {
- v4l2_err(vpfe_dev->pdev->driver,
- "vpfe vpss master clock not enabled\n");
- goto out;
- }
- v4l2_info(vpfe_dev->pdev->driver,
- "vpfe vpss master clock enabled\n");
-
- vpfe_cfg->slaveclk = clk_get(vpfe_dev->pdev, "vpss_slave");
- if (NULL == vpfe_cfg->slaveclk) {
- v4l2_err(vpfe_dev->pdev->driver,
- "No clock defined for vpss slave\n");
- goto out;
- }
-
- if (clk_enable(vpfe_cfg->slaveclk)) {
- v4l2_err(vpfe_dev->pdev->driver,
- "vpfe vpss slave clock not enabled\n");
- goto out;
- }
- v4l2_info(vpfe_dev->pdev->driver, "vpfe vpss slave clock enabled\n");
- return 0;
-out:
- if (vpfe_cfg->vpssclk)
- clk_put(vpfe_cfg->vpssclk);
- if (vpfe_cfg->slaveclk)
- clk_put(vpfe_cfg->slaveclk);
-
- return -1;
-}
-
/*
* vpfe_probe : This function creates device entries by register
* itself to the V4L2 driver and initializes fields of each
@@ -1870,7 +1809,7 @@
if (NULL == pdev->dev.platform_data) {
v4l2_err(pdev->dev.driver, "Unable to get vpfe config\n");
- ret = -ENOENT;
+ ret = -ENODEV;
goto probe_free_dev_mem;
}
@@ -1884,18 +1823,13 @@
goto probe_free_dev_mem;
}
- /* enable vpss clocks */
- ret = vpfe_enable_clock(vpfe_dev);
- if (ret)
- goto probe_free_dev_mem;
-
mutex_lock(&ccdc_lock);
/* Allocate memory for ccdc configuration */
ccdc_cfg = kmalloc(sizeof(struct ccdc_config), GFP_KERNEL);
if (NULL == ccdc_cfg) {
v4l2_err(pdev->dev.driver,
"Memory allocation failed for ccdc_cfg\n");
- goto probe_disable_clock;
+ goto probe_free_dev_mem;
}
strncpy(ccdc_cfg->name, vpfe_cfg->ccdc, 32);
@@ -1904,61 +1838,34 @@
if (!res1) {
v4l2_err(pdev->dev.driver,
"Unable to get interrupt for VINT0\n");
- ret = -ENOENT;
- goto probe_disable_clock;
+ ret = -ENODEV;
+ goto probe_free_ccdc_cfg_mem;
}
vpfe_dev->ccdc_irq0 = res1->start;
/* Get VINT1 irq resource */
- res1 = platform_get_resource(pdev,
- IORESOURCE_IRQ, 1);
+ res1 = platform_get_resource(pdev, IORESOURCE_IRQ, 1);
if (!res1) {
v4l2_err(pdev->dev.driver,
"Unable to get interrupt for VINT1\n");
- ret = -ENOENT;
- goto probe_disable_clock;
+ ret = -ENODEV;
+ goto probe_free_ccdc_cfg_mem;
}
vpfe_dev->ccdc_irq1 = res1->start;
- /* Get address base of CCDC */
- res1 = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res1) {
- v4l2_err(pdev->dev.driver,
- "Unable to get register address map\n");
- ret = -ENOENT;
- goto probe_disable_clock;
- }
-
- ccdc_cfg->ccdc_addr_size = res1->end - res1->start + 1;
- if (!request_mem_region(res1->start, ccdc_cfg->ccdc_addr_size,
- pdev->dev.driver->name)) {
- v4l2_err(pdev->dev.driver,
- "Failed request_mem_region for ccdc base\n");
- ret = -ENXIO;
- goto probe_disable_clock;
- }
- ccdc_cfg->ccdc_addr = ioremap_nocache(res1->start,
- ccdc_cfg->ccdc_addr_size);
- if (!ccdc_cfg->ccdc_addr) {
- v4l2_err(pdev->dev.driver, "Unable to ioremap ccdc addr\n");
- ret = -ENXIO;
- goto probe_out_release_mem1;
- }
-
ret = request_irq(vpfe_dev->ccdc_irq0, vpfe_isr, IRQF_DISABLED,
"vpfe_capture0", vpfe_dev);
if (0 != ret) {
v4l2_err(pdev->dev.driver, "Unable to request interrupt\n");
- goto probe_out_unmap1;
+ goto probe_free_ccdc_cfg_mem;
}
/* Allocate memory for video device */
vfd = video_device_alloc();
if (NULL == vfd) {
ret = -ENOMEM;
- v4l2_err(pdev->dev.driver,
- "Unable to alloc video device\n");
+ v4l2_err(pdev->dev.driver, "Unable to alloc video device\n");
goto probe_out_release_irq;
}
@@ -2073,12 +1980,7 @@
video_device_release(vpfe_dev->video_dev);
probe_out_release_irq:
free_irq(vpfe_dev->ccdc_irq0, vpfe_dev);
-probe_out_unmap1:
- iounmap(ccdc_cfg->ccdc_addr);
-probe_out_release_mem1:
- release_mem_region(res1->start, res1->end - res1->start + 1);
-probe_disable_clock:
- vpfe_disable_clock(vpfe_dev);
+probe_free_ccdc_cfg_mem:
mutex_unlock(&ccdc_lock);
kfree(ccdc_cfg);
probe_free_dev_mem:
@@ -2092,7 +1994,6 @@
static int __devexit vpfe_remove(struct platform_device *pdev)
{
struct vpfe_device *vpfe_dev = platform_get_drvdata(pdev);
- struct resource *res;
v4l2_info(pdev->dev.driver, "vpfe_remove\n");
@@ -2100,12 +2001,6 @@
kfree(vpfe_dev->sd);
v4l2_device_unregister(&vpfe_dev->v4l2_dev);
video_unregister_device(vpfe_dev->video_dev);
- mutex_lock(&ccdc_lock);
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- release_mem_region(res->start, res->end - res->start + 1);
- iounmap(ccdc_cfg->ccdc_addr);
- mutex_unlock(&ccdc_lock);
- vpfe_disable_clock(vpfe_dev);
kfree(vpfe_dev);
kfree(ccdc_cfg);
return 0;
diff --git a/drivers/media/video/davinci/vpss.c b/drivers/media/video/davinci/vpss.c
index 7ee72ec..7918680 100644
--- a/drivers/media/video/davinci/vpss.c
+++ b/drivers/media/video/davinci/vpss.c
@@ -15,7 +15,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
- * common vpss driver for all video drivers.
+ * common vpss system module platform driver for all video drivers.
*/
#include <linux/kernel.h>
#include <linux/sched.h>
@@ -35,12 +35,52 @@
/* DM644x defines */
#define DM644X_SBL_PCR_VPSS (4)
+#define DM355_VPSSBL_INTSEL 0x10
+#define DM355_VPSSBL_EVTSEL 0x14
/* vpss BL register offsets */
#define DM355_VPSSBL_CCDCMUX 0x1c
/* vpss CLK register offsets */
#define DM355_VPSSCLK_CLKCTRL 0x04
/* masks and shifts */
#define VPSS_HSSISEL_SHIFT 4
+/*
+ * VDINT0 - vpss_int0, VDINT1 - vpss_int1, H3A - vpss_int4,
+ * IPIPE_INT1_SDR - vpss_int5
+ */
+#define DM355_VPSSBL_INTSEL_DEFAULT 0xff83ff10
+/* VENCINT - vpss_int8 */
+#define DM355_VPSSBL_EVTSEL_DEFAULT 0x4
+
+#define DM365_ISP5_PCCR 0x04
+#define DM365_ISP5_INTSEL1 0x10
+#define DM365_ISP5_INTSEL2 0x14
+#define DM365_ISP5_INTSEL3 0x18
+#define DM365_ISP5_CCDCMUX 0x20
+#define DM365_ISP5_PG_FRAME_SIZE 0x28
+#define DM365_VPBE_CLK_CTRL 0x00
+/*
+ * vpss interrupts. VDINT0 - vpss_int0, VDINT1 - vpss_int1,
+ * AF - vpss_int3
+ */
+#define DM365_ISP5_INTSEL1_DEFAULT 0x0b1f0100
+/* AEW - vpss_int6, RSZ_INT_DMA - vpss_int5 */
+#define DM365_ISP5_INTSEL2_DEFAULT 0x1f0a0f1f
+/* VENC - vpss_int8 */
+#define DM365_ISP5_INTSEL3_DEFAULT 0x00000015
+
+/* masks and shifts for DM365*/
+#define DM365_CCDC_PG_VD_POL_SHIFT 0
+#define DM365_CCDC_PG_HD_POL_SHIFT 1
+
+#define CCD_SRC_SEL_MASK (BIT_MASK(5) | BIT_MASK(4))
+#define CCD_SRC_SEL_SHIFT 4
+
+/* Different SoC platforms supported by this driver */
+enum vpss_platform_type {
+ DM644X,
+ DM355,
+ DM365,
+};
/*
* vpss operations. Depends on platform. Not all functions are available
@@ -59,13 +99,9 @@
/* vpss configuration */
struct vpss_oper_config {
- __iomem void *vpss_bl_regs_base;
- __iomem void *vpss_regs_base;
- struct resource *r1;
- resource_size_t len1;
- struct resource *r2;
- resource_size_t len2;
- char vpss_name[32];
+ __iomem void *vpss_regs_base0;
+ __iomem void *vpss_regs_base1;
+ enum vpss_platform_type platform;
spinlock_t vpss_lock;
struct vpss_hw_ops hw_ops;
};
@@ -75,22 +111,46 @@
/* register access routines */
static inline u32 bl_regr(u32 offset)
{
- return __raw_readl(oper_cfg.vpss_bl_regs_base + offset);
+ return __raw_readl(oper_cfg.vpss_regs_base0 + offset);
}
static inline void bl_regw(u32 val, u32 offset)
{
- __raw_writel(val, oper_cfg.vpss_bl_regs_base + offset);
+ __raw_writel(val, oper_cfg.vpss_regs_base0 + offset);
}
static inline u32 vpss_regr(u32 offset)
{
- return __raw_readl(oper_cfg.vpss_regs_base + offset);
+ return __raw_readl(oper_cfg.vpss_regs_base1 + offset);
}
static inline void vpss_regw(u32 val, u32 offset)
{
- __raw_writel(val, oper_cfg.vpss_regs_base + offset);
+ __raw_writel(val, oper_cfg.vpss_regs_base1 + offset);
+}
+
+/* For DM365 only */
+static inline u32 isp5_read(u32 offset)
+{
+ return __raw_readl(oper_cfg.vpss_regs_base0 + offset);
+}
+
+/* For DM365 only */
+static inline void isp5_write(u32 val, u32 offset)
+{
+ __raw_writel(val, oper_cfg.vpss_regs_base0 + offset);
+}
+
+static void dm365_select_ccdc_source(enum vpss_ccdc_source_sel src_sel)
+{
+ u32 temp = isp5_read(DM365_ISP5_CCDCMUX) & ~CCD_SRC_SEL_MASK;
+
+ /* if we are using pattern generator, enable it */
+ if (src_sel == VPSS_PGLPBK || src_sel == VPSS_CCDCPG)
+ temp |= 0x08;
+
+ temp |= (src_sel << CCD_SRC_SEL_SHIFT);
+ isp5_write(temp, DM365_ISP5_CCDCMUX);
}
static void dm355_select_ccdc_source(enum vpss_ccdc_source_sel src_sel)
@@ -101,9 +161,9 @@
int vpss_select_ccdc_source(enum vpss_ccdc_source_sel src_sel)
{
if (!oper_cfg.hw_ops.select_ccdc_source)
- return -1;
+ return -EINVAL;
- dm355_select_ccdc_source(src_sel);
+ oper_cfg.hw_ops.select_ccdc_source(src_sel);
return 0;
}
EXPORT_SYMBOL(vpss_select_ccdc_source);
@@ -114,7 +174,7 @@
if (wbl_sel < VPSS_PCR_AEW_WBL_0 ||
wbl_sel > VPSS_PCR_CCDC_WBL_O)
- return -1;
+ return -EINVAL;
/* writing a 0 clear the overflow */
mask = ~(mask << wbl_sel);
@@ -126,7 +186,7 @@
int vpss_clear_wbl_overflow(enum vpss_wbl_sel wbl_sel)
{
if (!oper_cfg.hw_ops.clear_wbl_overflow)
- return -1;
+ return -EINVAL;
return oper_cfg.hw_ops.clear_wbl_overflow(wbl_sel);
}
@@ -166,7 +226,7 @@
default:
printk(KERN_ERR "dm355_enable_clock:"
" Invalid selector: %d\n", clock_sel);
- return -1;
+ return -EINVAL;
}
spin_lock_irqsave(&oper_cfg.vpss_lock, flags);
@@ -181,100 +241,221 @@
return 0;
}
+static int dm365_enable_clock(enum vpss_clock_sel clock_sel, int en)
+{
+ unsigned long flags;
+ u32 utemp, mask = 0x1, shift = 0, offset = DM365_ISP5_PCCR;
+ u32 (*read)(u32 offset) = isp5_read;
+ void(*write)(u32 val, u32 offset) = isp5_write;
+
+ switch (clock_sel) {
+ case VPSS_BL_CLOCK:
+ break;
+ case VPSS_CCDC_CLOCK:
+ shift = 1;
+ break;
+ case VPSS_H3A_CLOCK:
+ shift = 2;
+ break;
+ case VPSS_RSZ_CLOCK:
+ shift = 3;
+ break;
+ case VPSS_IPIPE_CLOCK:
+ shift = 4;
+ break;
+ case VPSS_IPIPEIF_CLOCK:
+ shift = 5;
+ break;
+ case VPSS_PCLK_INTERNAL:
+ shift = 6;
+ break;
+ case VPSS_PSYNC_CLOCK_SEL:
+ shift = 7;
+ break;
+ case VPSS_VPBE_CLOCK:
+ read = vpss_regr;
+ write = vpss_regw;
+ offset = DM365_VPBE_CLK_CTRL;
+ break;
+ case VPSS_VENC_CLOCK_SEL:
+ shift = 2;
+ read = vpss_regr;
+ write = vpss_regw;
+ offset = DM365_VPBE_CLK_CTRL;
+ break;
+ case VPSS_LDC_CLOCK:
+ shift = 3;
+ read = vpss_regr;
+ write = vpss_regw;
+ offset = DM365_VPBE_CLK_CTRL;
+ break;
+ case VPSS_FDIF_CLOCK:
+ shift = 4;
+ read = vpss_regr;
+ write = vpss_regw;
+ offset = DM365_VPBE_CLK_CTRL;
+ break;
+ case VPSS_OSD_CLOCK_SEL:
+ shift = 6;
+ read = vpss_regr;
+ write = vpss_regw;
+ offset = DM365_VPBE_CLK_CTRL;
+ break;
+ case VPSS_LDC_CLOCK_SEL:
+ shift = 7;
+ read = vpss_regr;
+ write = vpss_regw;
+ offset = DM365_VPBE_CLK_CTRL;
+ break;
+ default:
+ printk(KERN_ERR "dm365_enable_clock: Invalid selector: %d\n",
+ clock_sel);
+ return -1;
+ }
+
+ spin_lock_irqsave(&oper_cfg.vpss_lock, flags);
+ utemp = read(offset);
+ if (!en) {
+ mask = ~mask;
+ utemp &= (mask << shift);
+ } else
+ utemp |= (mask << shift);
+
+ write(utemp, offset);
+ spin_unlock_irqrestore(&oper_cfg.vpss_lock, flags);
+
+ return 0;
+}
+
int vpss_enable_clock(enum vpss_clock_sel clock_sel, int en)
{
if (!oper_cfg.hw_ops.enable_clock)
- return -1;
+ return -EINVAL;
return oper_cfg.hw_ops.enable_clock(clock_sel, en);
}
EXPORT_SYMBOL(vpss_enable_clock);
+void dm365_vpss_set_sync_pol(struct vpss_sync_pol sync)
+{
+ int val = 0;
+ val = isp5_read(DM365_ISP5_CCDCMUX);
+
+ val |= (sync.ccdpg_hdpol << DM365_CCDC_PG_HD_POL_SHIFT);
+ val |= (sync.ccdpg_vdpol << DM365_CCDC_PG_VD_POL_SHIFT);
+
+ isp5_write(val, DM365_ISP5_CCDCMUX);
+}
+EXPORT_SYMBOL(dm365_vpss_set_sync_pol);
+
+void dm365_vpss_set_pg_frame_size(struct vpss_pg_frame_size frame_size)
+{
+ int current_reg = ((frame_size.hlpfr >> 1) - 1) << 16;
+
+ current_reg |= (frame_size.pplen - 1);
+ isp5_write(current_reg, DM365_ISP5_PG_FRAME_SIZE);
+}
+EXPORT_SYMBOL(dm365_vpss_set_pg_frame_size);
+
static int __init vpss_probe(struct platform_device *pdev)
{
- int status, dm355 = 0;
+ struct resource *r1, *r2;
+ char *platform_name;
+ int status;
if (!pdev->dev.platform_data) {
dev_err(&pdev->dev, "no platform data\n");
return -ENOENT;
}
- strcpy(oper_cfg.vpss_name, pdev->dev.platform_data);
- if (!strcmp(oper_cfg.vpss_name, "dm355_vpss"))
- dm355 = 1;
- else if (strcmp(oper_cfg.vpss_name, "dm644x_vpss")) {
+ platform_name = pdev->dev.platform_data;
+ if (!strcmp(platform_name, "dm355_vpss"))
+ oper_cfg.platform = DM355;
+ else if (!strcmp(platform_name, "dm365_vpss"))
+ oper_cfg.platform = DM365;
+ else if (!strcmp(platform_name, "dm644x_vpss"))
+ oper_cfg.platform = DM644X;
+ else {
dev_err(&pdev->dev, "vpss driver not supported on"
" this platform\n");
return -ENODEV;
}
- dev_info(&pdev->dev, "%s vpss probed\n", oper_cfg.vpss_name);
- oper_cfg.r1 = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!oper_cfg.r1)
+ dev_info(&pdev->dev, "%s vpss probed\n", platform_name);
+ r1 = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!r1)
return -ENOENT;
- oper_cfg.len1 = oper_cfg.r1->end - oper_cfg.r1->start + 1;
-
- oper_cfg.r1 = request_mem_region(oper_cfg.r1->start, oper_cfg.len1,
- oper_cfg.r1->name);
- if (!oper_cfg.r1)
+ r1 = request_mem_region(r1->start, resource_size(r1), r1->name);
+ if (!r1)
return -EBUSY;
- oper_cfg.vpss_bl_regs_base = ioremap(oper_cfg.r1->start, oper_cfg.len1);
- if (!oper_cfg.vpss_bl_regs_base) {
+ oper_cfg.vpss_regs_base0 = ioremap(r1->start, resource_size(r1));
+ if (!oper_cfg.vpss_regs_base0) {
status = -EBUSY;
goto fail1;
}
- if (dm355) {
- oper_cfg.r2 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
- if (!oper_cfg.r2) {
+ if (oper_cfg.platform == DM355 || oper_cfg.platform == DM365) {
+ r2 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ if (!r2) {
status = -ENOENT;
goto fail2;
}
- oper_cfg.len2 = oper_cfg.r2->end - oper_cfg.r2->start + 1;
- oper_cfg.r2 = request_mem_region(oper_cfg.r2->start,
- oper_cfg.len2,
- oper_cfg.r2->name);
- if (!oper_cfg.r2) {
+ r2 = request_mem_region(r2->start, resource_size(r2), r2->name);
+ if (!r2) {
status = -EBUSY;
goto fail2;
}
- oper_cfg.vpss_regs_base = ioremap(oper_cfg.r2->start,
- oper_cfg.len2);
- if (!oper_cfg.vpss_regs_base) {
+ oper_cfg.vpss_regs_base1 = ioremap(r2->start,
+ resource_size(r2));
+ if (!oper_cfg.vpss_regs_base1) {
status = -EBUSY;
goto fail3;
}
}
- if (dm355) {
+ if (oper_cfg.platform == DM355) {
oper_cfg.hw_ops.enable_clock = dm355_enable_clock;
oper_cfg.hw_ops.select_ccdc_source = dm355_select_ccdc_source;
+ /* Setup vpss interrupts */
+ bl_regw(DM355_VPSSBL_INTSEL_DEFAULT, DM355_VPSSBL_INTSEL);
+ bl_regw(DM355_VPSSBL_EVTSEL_DEFAULT, DM355_VPSSBL_EVTSEL);
+ } else if (oper_cfg.platform == DM365) {
+ oper_cfg.hw_ops.enable_clock = dm365_enable_clock;
+ oper_cfg.hw_ops.select_ccdc_source = dm365_select_ccdc_source;
+ /* Setup vpss interrupts */
+ isp5_write(DM365_ISP5_INTSEL1_DEFAULT, DM365_ISP5_INTSEL1);
+ isp5_write(DM365_ISP5_INTSEL2_DEFAULT, DM365_ISP5_INTSEL2);
+ isp5_write(DM365_ISP5_INTSEL3_DEFAULT, DM365_ISP5_INTSEL3);
} else
oper_cfg.hw_ops.clear_wbl_overflow = dm644x_clear_wbl_overflow;
spin_lock_init(&oper_cfg.vpss_lock);
- dev_info(&pdev->dev, "%s vpss probe success\n", oper_cfg.vpss_name);
+ dev_info(&pdev->dev, "%s vpss probe success\n", platform_name);
return 0;
fail3:
- release_mem_region(oper_cfg.r2->start, oper_cfg.len2);
+ release_mem_region(r2->start, resource_size(r2));
fail2:
- iounmap(oper_cfg.vpss_bl_regs_base);
+ iounmap(oper_cfg.vpss_regs_base0);
fail1:
- release_mem_region(oper_cfg.r1->start, oper_cfg.len1);
+ release_mem_region(r1->start, resource_size(r1));
return status;
}
static int __devexit vpss_remove(struct platform_device *pdev)
{
- iounmap(oper_cfg.vpss_bl_regs_base);
- release_mem_region(oper_cfg.r1->start, oper_cfg.len1);
- if (!strcmp(oper_cfg.vpss_name, "dm355_vpss")) {
- iounmap(oper_cfg.vpss_regs_base);
- release_mem_region(oper_cfg.r2->start, oper_cfg.len2);
+ struct resource *res;
+
+ iounmap(oper_cfg.vpss_regs_base0);
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ release_mem_region(res->start, resource_size(res));
+ if (oper_cfg.platform == DM355 || oper_cfg.platform == DM365) {
+ iounmap(oper_cfg.vpss_regs_base1);
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ release_mem_region(res->start, resource_size(res));
}
return 0;
}
diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index 2510000..ecbcefb 100644
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -232,6 +232,12 @@
{ -1, -1, -1, -1},
};
+static struct em28xx_reg_seq dikom_dk300_digital[] = {
+ {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10},
+ {EM2880_R04_GPO, 0x08, 0xff, 10},
+ { -1, -1, -1, -1},
+};
+
/*
* Board definitions
@@ -461,21 +467,30 @@
.name = "Leadtek Winfast USB II Deluxe",
.valid = EM28XX_BOARD_NOT_VALIDATED,
.tuner_type = TUNER_PHILIPS_FM1216ME_MK3,
- .tda9887_conf = TDA9887_PRESENT,
+ .has_ir_i2c = 1,
+ .tvaudio_addr = 0x58,
+ .tda9887_conf = TDA9887_PRESENT |
+ TDA9887_PORT2_ACTIVE |
+ TDA9887_QSS,
.decoder = EM28XX_SAA711X,
+ .adecoder = EM28XX_TVAUDIO,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
- .vmux = SAA7115_COMPOSITE2,
- .amux = EM28XX_AMUX_VIDEO,
+ .vmux = SAA7115_COMPOSITE4,
+ .amux = EM28XX_AMUX_AUX,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
- .vmux = SAA7115_COMPOSITE0,
+ .vmux = SAA7115_COMPOSITE5,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
- .vmux = SAA7115_COMPOSITE0,
+ .vmux = SAA7115_SVIDEO3,
.amux = EM28XX_AMUX_LINE_IN,
} },
+ .radio = {
+ .type = EM28XX_RADIO,
+ .amux = EM28XX_AMUX_AUX,
+ }
},
[EM2820_BOARD_VIDEOLOGY_20K14XUSB] = {
.name = "Videology 20K14XUSB USB2.0",
@@ -730,11 +745,12 @@
[EM2880_BOARD_TERRATEC_HYBRID_XS_FR] = {
.name = "Terratec Hybrid XS Secam",
- .valid = EM28XX_BOARD_NOT_VALIDATED,
.has_msp34xx = 1,
.tuner_type = TUNER_XC2028,
.tuner_gpio = default_tuner_gpio,
.decoder = EM28XX_TVP5150,
+ .has_dvb = 1,
+ .dvb_gpio = default_digital,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
@@ -1265,6 +1281,7 @@
.decoder = EM28XX_SAA711X,
.has_dvb = 1,
.dvb_gpio = em2882_kworld_315u_digital,
+ .ir_codes = &ir_codes_kworld_315u_table,
.xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE,
/* Analog mode - still not ready */
@@ -1431,6 +1448,21 @@
.gpio = hauppauge_wintv_hvr_900_analog,
} },
},
+ [EM2882_BOARD_DIKOM_DK300] = {
+ .name = "Dikom DK300",
+ .tuner_type = TUNER_XC2028,
+ .tuner_gpio = default_tuner_gpio,
+ .decoder = EM28XX_TVP5150,
+ .mts_firmware = 1,
+ .has_dvb = 1,
+ .dvb_gpio = dikom_dk300_digital,
+ .input = { {
+ .type = EM28XX_VMUX_TELEVISION,
+ .vmux = TVP5150_COMPOSITE0,
+ .amux = EM28XX_AMUX_VIDEO,
+ .gpio = default_analog,
+ } },
+ },
[EM2883_BOARD_KWORLD_HYBRID_330U] = {
.name = "Kworld PlusTV HD Hybrid 330",
.tuner_type = TUNER_XC2028,
@@ -1751,6 +1783,7 @@
{0xcee44a99, EM2882_BOARD_EVGA_INDTUBE, TUNER_XC2028},
{0xb8846b20, EM2881_BOARD_PINNACLE_HYBRID_PRO, TUNER_XC2028},
{0x63f653bd, EM2870_BOARD_REDDO_DVB_C_USB_BOX, TUNER_ABSENT},
+ {0x4e913442, EM2882_BOARD_DIKOM_DK300, TUNER_XC2028},
};
/* I2C devicelist hash table for devices with generic USB IDs */
@@ -2103,6 +2136,7 @@
ctl->demod = XC3028_FE_DEFAULT;
break;
case EM2883_BOARD_KWORLD_HYBRID_330U:
+ case EM2882_BOARD_DIKOM_DK300:
ctl->demod = XC3028_FE_CHINA;
ctl->fname = XC2028_DEFAULT_FIRMWARE;
break;
@@ -2259,9 +2293,12 @@
/* ----------------------------------------------------------------------- */
void em28xx_register_i2c_ir(struct em28xx *dev)
{
+ /* Leadtek winfast tv USBII deluxe can find a non working IR-device */
+ /* at address 0x18, so if that address is needed for another board in */
+ /* the future, please put it after 0x1f. */
struct i2c_board_info info;
const unsigned short addr_list[] = {
- 0x30, 0x47, I2C_CLIENT_END
+ 0x1f, 0x30, 0x47, I2C_CLIENT_END
};
if (disable_ir)
@@ -2288,6 +2325,10 @@
dev->init_data.ir_codes = &ir_codes_rc5_hauppauge_new_table;
dev->init_data.get_key = em28xx_get_key_em_haup;
dev->init_data.name = "i2c IR (EM2840 Hauppauge)";
+ case EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE:
+ dev->init_data.ir_codes = &ir_codes_winfast_usbii_deluxe_table;;
+ dev->init_data.get_key = em28xx_get_key_winfast_usbii_deluxe;
+ dev->init_data.name = "i2c IR (EM2820 Winfast TV USBII Deluxe)";
break;
}
@@ -2381,6 +2422,31 @@
em28xx_gpio_set(dev, dev->board.tuner_gpio);
em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
break;
+
+/*
+ * The Dikom DK300 is detected as an Kworld VS-DVB-T 323UR.
+ *
+ * This occurs because they share identical USB vendor and
+ * product IDs.
+ *
+ * What we do here is look up the EEPROM hash of the Dikom
+ * and if it is found then we decide that we do not have
+ * a Kworld and reset the device to the Dikom instead.
+ *
+ * This solution is only valid if they do not share eeprom
+ * hash identities which has not been determined as yet.
+ */
+ case EM2882_BOARD_KWORLD_VS_DVBT:
+ if (!em28xx_hint_board(dev))
+ em28xx_set_model(dev);
+
+ /* In cases where we had to use a board hint, the call to
+ em28xx_set_mode() in em28xx_pre_card_setup() was a no-op,
+ so make the call now so the analog GPIOs are set properly
+ before probing the i2c bus. */
+ em28xx_gpio_set(dev, dev->board.tuner_gpio);
+ em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
+ break;
}
#if defined(CONFIG_MODULES) && defined(MODULE)
diff --git a/drivers/media/video/em28xx/em28xx-core.c b/drivers/media/video/em28xx/em28xx-core.c
index b311d45..5a37ecc 100644
--- a/drivers/media/video/em28xx/em28xx-core.c
+++ b/drivers/media/video/em28xx/em28xx-core.c
@@ -691,9 +691,15 @@
if (em28xx_vbi_supported(dev) == 1) {
vinctrl |= EM28XX_VINCTRL_VBI_RAW;
em28xx_write_reg(dev, EM28XX_R34_VBI_START_H, 0x00);
- em28xx_write_reg(dev, EM28XX_R35_VBI_START_V, 0x09);
- em28xx_write_reg(dev, EM28XX_R36_VBI_WIDTH, 0xb4);
- em28xx_write_reg(dev, EM28XX_R37_VBI_HEIGHT, 0x0c);
+ em28xx_write_reg(dev, EM28XX_R36_VBI_WIDTH, dev->vbi_width/4);
+ em28xx_write_reg(dev, EM28XX_R37_VBI_HEIGHT, dev->vbi_height);
+ if (dev->norm & V4L2_STD_525_60) {
+ /* NTSC */
+ em28xx_write_reg(dev, EM28XX_R35_VBI_START_V, 0x09);
+ } else if (dev->norm & V4L2_STD_625_50) {
+ /* PAL */
+ em28xx_write_reg(dev, EM28XX_R35_VBI_START_V, 0x07);
+ }
}
return em28xx_write_reg(dev, EM28XX_R11_VINCTRL, vinctrl);
@@ -760,6 +766,13 @@
width = norm_maxw(dev);
height = norm_maxh(dev);
+ /* Properly setup VBI */
+ dev->vbi_width = 720;
+ if (dev->norm & V4L2_STD_525_60)
+ dev->vbi_height = 12;
+ else
+ dev->vbi_height = 18;
+
if (!dev->progressive)
height >>= norm_maxh(dev);
diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/video/em28xx/em28xx-dvb.c
index cc0505e..1b96356 100644
--- a/drivers/media/video/em28xx/em28xx-dvb.c
+++ b/drivers/media/video/em28xx/em28xx-dvb.c
@@ -502,7 +502,9 @@
}
break;
case EM2880_BOARD_TERRATEC_HYBRID_XS:
+ case EM2880_BOARD_TERRATEC_HYBRID_XS_FR:
case EM2881_BOARD_PINNACLE_HYBRID_PRO:
+ case EM2882_BOARD_DIKOM_DK300:
dvb->frontend = dvb_attach(zl10353_attach,
&em28xx_zl10353_xc3028_no_i2c_gate,
&dev->i2c_adap);
@@ -606,6 +608,7 @@
if (dev->dvb) {
unregister_dvb(dev->dvb);
+ kfree(dev->dvb);
dev->dvb = NULL;
}
diff --git a/drivers/media/video/em28xx/em28xx-input.c b/drivers/media/video/em28xx/em28xx-input.c
index af0d935..1fb754e 100644
--- a/drivers/media/video/em28xx/em28xx-input.c
+++ b/drivers/media/video/em28xx/em28xx-input.c
@@ -75,6 +75,10 @@
unsigned int repeat_interval;
int (*get_key)(struct em28xx_IR *, struct em28xx_ir_poll_result *);
+
+ /* IR device properties */
+
+ struct ir_dev_props props;
};
/**********************************************************
@@ -180,6 +184,36 @@
return 1;
}
+int em28xx_get_key_winfast_usbii_deluxe(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
+{
+ unsigned char subaddr, keydetect, key;
+
+ struct i2c_msg msg[] = { { .addr = ir->c->addr, .flags = 0, .buf = &subaddr, .len = 1},
+
+ { .addr = ir->c->addr, .flags = I2C_M_RD, .buf = &keydetect, .len = 1} };
+
+ subaddr = 0x10;
+ if (2 != i2c_transfer(ir->c->adapter, msg, 2)) {
+ i2cdprintk("read error\n");
+ return -EIO;
+ }
+ if (keydetect == 0x00)
+ return 0;
+
+ subaddr = 0x00;
+ msg[1].buf = &key;
+ if (2 != i2c_transfer(ir->c->adapter, msg, 2)) {
+ i2cdprintk("read error\n");
+ return -EIO;
+ }
+ if (key == 0x00)
+ return 0;
+
+ *ir_key = key;
+ *ir_raw = key;
+ return 1;
+}
+
/**********************************************************
Poll based get keycode functions
**********************************************************/
@@ -336,35 +370,28 @@
cancel_delayed_work_sync(&ir->work);
}
-int em28xx_ir_init(struct em28xx *dev)
+int em28xx_ir_change_protocol(void *priv, u64 ir_type)
{
- struct em28xx_IR *ir;
- struct input_dev *input_dev;
- u8 ir_config;
- int err = -ENOMEM;
-
- if (dev->board.ir_codes == NULL) {
- /* No remote control support */
- return 0;
- }
-
- ir = kzalloc(sizeof(*ir), GFP_KERNEL);
- input_dev = input_allocate_device();
- if (!ir || !input_dev)
- goto err_out_free;
-
- ir->input = input_dev;
- ir_config = EM2874_IR_RC5;
+ int rc = 0;
+ struct em28xx_IR *ir = priv;
+ struct em28xx *dev = ir->dev;
+ u8 ir_config = EM2874_IR_RC5;
/* Adjust xclk based o IR table for RC5/NEC tables */
- if (dev->board.ir_codes->ir_type == IR_TYPE_RC5) {
+
+ dev->board.ir_codes->ir_type = IR_TYPE_OTHER;
+ if (ir_type == IR_TYPE_RC5) {
dev->board.xclk |= EM28XX_XCLK_IR_RC5_MODE;
ir->full_code = 1;
- } else if (dev->board.ir_codes->ir_type == IR_TYPE_NEC) {
+ } else if (ir_type == IR_TYPE_NEC) {
dev->board.xclk &= ~EM28XX_XCLK_IR_RC5_MODE;
ir_config = EM2874_IR_NEC;
ir->full_code = 1;
- }
+ } else
+ rc = -EINVAL;
+
+ dev->board.ir_codes->ir_type = ir_type;
+
em28xx_write_reg_bits(dev, EM28XX_R0F_XCLK, dev->board.xclk,
EM28XX_XCLK_IR_RC5_MODE);
@@ -380,9 +407,42 @@
break;
default:
printk("Unrecognized em28xx chip id: IR not supported\n");
- goto err_out_free;
+ rc = -EINVAL;
}
+ return rc;
+}
+
+int em28xx_ir_init(struct em28xx *dev)
+{
+ struct em28xx_IR *ir;
+ struct input_dev *input_dev;
+ int err = -ENOMEM;
+
+ if (dev->board.ir_codes == NULL) {
+ /* No remote control support */
+ return 0;
+ }
+
+ ir = kzalloc(sizeof(*ir), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!ir || !input_dev)
+ goto err_out_free;
+
+ /* record handles to ourself */
+ ir->dev = dev;
+ dev->ir = ir;
+
+ ir->input = input_dev;
+
+ /*
+ * em2874 supports more protocols. For now, let's just announce
+ * the two protocols that were already tested
+ */
+ ir->props.allowed_protos = IR_TYPE_RC5 | IR_TYPE_NEC;
+ ir->props.priv = ir;
+ ir->props.change_protocol = em28xx_ir_change_protocol;
+
/* This is how often we ask the chip for IR information */
ir->polling = 100; /* ms */
@@ -393,6 +453,8 @@
usb_make_path(dev->udev, ir->phys, sizeof(ir->phys));
strlcat(ir->phys, "/input0", sizeof(ir->phys));
+ /* Set IR protocol */
+ em28xx_ir_change_protocol(ir, dev->board.ir_codes->ir_type);
err = ir_input_init(input_dev, &ir->ir, IR_TYPE_OTHER);
if (err < 0)
goto err_out_free;
@@ -405,14 +467,13 @@
input_dev->id.product = le16_to_cpu(dev->udev->descriptor.idProduct);
input_dev->dev.parent = &dev->udev->dev;
- /* record handles to ourself */
- ir->dev = dev;
- dev->ir = ir;
+
em28xx_ir_start(ir);
/* all done */
- err = ir_input_register(ir->input, dev->board.ir_codes);
+ err = ir_input_register(ir->input, dev->board.ir_codes,
+ &ir->props);
if (err)
goto err_out_stop;
diff --git a/drivers/media/video/em28xx/em28xx-reg.h b/drivers/media/video/em28xx/em28xx-reg.h
index 058ac87..91e9055 100644
--- a/drivers/media/video/em28xx/em28xx-reg.h
+++ b/drivers/media/video/em28xx/em28xx-reg.h
@@ -173,8 +173,8 @@
/* em2874 IR config register (0x50) */
#define EM2874_IR_NEC 0x00
#define EM2874_IR_RC5 0x04
-#define EM2874_IR_RC5_MODE_0 0x08
-#define EM2874_IR_RC5_MODE_6A 0x0b
+#define EM2874_IR_RC6_MODE_0 0x08
+#define EM2874_IR_RC6_MODE_6A 0x0b
/* em2874 Transport Stream Enable Register (0x5f) */
#define EM2874_TS1_CAPTURE_ENABLE (1 << 0)
diff --git a/drivers/media/video/em28xx/em28xx-vbi.c b/drivers/media/video/em28xx/em28xx-vbi.c
index 94943e5..c7dce39 100644
--- a/drivers/media/video/em28xx/em28xx-vbi.c
+++ b/drivers/media/video/em28xx/em28xx-vbi.c
@@ -71,7 +71,11 @@
static int
vbi_setup(struct videobuf_queue *q, unsigned int *count, unsigned int *size)
{
- *size = 720 * 12 * 2;
+ struct em28xx_fh *fh = q->priv_data;
+ struct em28xx *dev = fh->dev;
+
+ *size = dev->vbi_width * dev->vbi_height * 2;
+
if (0 == *count)
*count = vbibufs;
if (*count < 2)
@@ -85,19 +89,18 @@
vbi_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb,
enum v4l2_field field)
{
+ struct em28xx_fh *fh = q->priv_data;
+ struct em28xx *dev = fh->dev;
struct em28xx_buffer *buf = container_of(vb, struct em28xx_buffer, vb);
int rc = 0;
- unsigned int size;
- size = 720 * 12 * 2;
-
- buf->vb.size = size;
+ buf->vb.size = dev->vbi_width * dev->vbi_height * 2;
if (0 != buf->vb.baddr && buf->vb.bsize < buf->vb.size)
return -EINVAL;
- buf->vb.width = 720;
- buf->vb.height = 12;
+ buf->vb.width = dev->vbi_width;
+ buf->vb.height = dev->vbi_height;
buf->vb.field = field;
if (VIDEOBUF_NEEDS_INIT == buf->vb.state) {
diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c
index 849b18c..ac2bd93 100644
--- a/drivers/media/video/em28xx/em28xx-video.c
+++ b/drivers/media/video/em28xx/em28xx-video.c
@@ -282,7 +282,7 @@
{
void *startwrite, *startread;
int offset;
- int bytesperline = 720;
+ int bytesperline = dev->vbi_width;
if (dev == NULL) {
em28xx_isocdbg("dev is null\n");
@@ -323,8 +323,8 @@
/* Make sure the bottom field populates the second half of the frame */
if (buf->top_field == 0) {
- startwrite += bytesperline * 0x0c;
- offset += bytesperline * 0x0c;
+ startwrite += bytesperline * dev->vbi_height;
+ offset += bytesperline * dev->vbi_height;
}
memcpy(startwrite, startread, len);
@@ -578,8 +578,7 @@
dev->cur_field = p[2];
}
- /* FIXME: get rid of hard-coded value */
- vbi_size = 720 * 0x0c;
+ vbi_size = dev->vbi_width * dev->vbi_height;
if (dev->capture_type == 0) {
if (dev->vbi_read >= vbi_size) {
@@ -1850,18 +1849,27 @@
static int vidioc_g_fmt_vbi_cap(struct file *file, void *priv,
struct v4l2_format *format)
{
- format->fmt.vbi.samples_per_line = 720;
+ struct em28xx_fh *fh = priv;
+ struct em28xx *dev = fh->dev;
+
+ format->fmt.vbi.samples_per_line = dev->vbi_width;
format->fmt.vbi.sample_format = V4L2_PIX_FMT_GREY;
format->fmt.vbi.offset = 0;
format->fmt.vbi.flags = 0;
+ format->fmt.vbi.sampling_rate = 6750000 * 4 / 2;
+ format->fmt.vbi.count[0] = dev->vbi_height;
+ format->fmt.vbi.count[1] = dev->vbi_height;
/* Varies by video standard (NTSC, PAL, etc.) */
- /* FIXME: hard-coded for NTSC support */
- format->fmt.vbi.sampling_rate = 6750000 * 4 / 2; /* FIXME: ??? */
- format->fmt.vbi.count[0] = 12;
- format->fmt.vbi.count[1] = 12;
- format->fmt.vbi.start[0] = 10;
- format->fmt.vbi.start[1] = 273;
+ if (dev->norm & V4L2_STD_525_60) {
+ /* NTSC */
+ format->fmt.vbi.start[0] = 10;
+ format->fmt.vbi.start[1] = 273;
+ } else if (dev->norm & V4L2_STD_625_50) {
+ /* PAL */
+ format->fmt.vbi.start[0] = 6;
+ format->fmt.vbi.start[1] = 318;
+ }
return 0;
}
@@ -1869,18 +1877,27 @@
static int vidioc_s_fmt_vbi_cap(struct file *file, void *priv,
struct v4l2_format *format)
{
- format->fmt.vbi.samples_per_line = 720;
+ struct em28xx_fh *fh = priv;
+ struct em28xx *dev = fh->dev;
+
+ format->fmt.vbi.samples_per_line = dev->vbi_width;
format->fmt.vbi.sample_format = V4L2_PIX_FMT_GREY;
format->fmt.vbi.offset = 0;
format->fmt.vbi.flags = 0;
+ format->fmt.vbi.sampling_rate = 6750000 * 4 / 2;
+ format->fmt.vbi.count[0] = dev->vbi_height;
+ format->fmt.vbi.count[1] = dev->vbi_height;
/* Varies by video standard (NTSC, PAL, etc.) */
- /* FIXME: hard-coded for NTSC support */
- format->fmt.vbi.sampling_rate = 6750000 * 4 / 2; /* FIXME: ??? */
- format->fmt.vbi.count[0] = 12;
- format->fmt.vbi.count[1] = 12;
- format->fmt.vbi.start[0] = 10;
- format->fmt.vbi.start[1] = 273;
+ if (dev->norm & V4L2_STD_525_60) {
+ /* NTSC */
+ format->fmt.vbi.start[0] = 10;
+ format->fmt.vbi.start[1] = 273;
+ } else if (dev->norm & V4L2_STD_625_50) {
+ /* PAL */
+ format->fmt.vbi.start[0] = 6;
+ format->fmt.vbi.start[1] = 318;
+ }
return 0;
}
@@ -1922,7 +1939,8 @@
At a minimum, it causes a crash in zvbi since it does
a memcpy based on the source buffer length */
int result = videobuf_querybuf(&fh->vb_vbiq, b);
- b->length = 17280;
+ b->length = dev->vbi_width * dev->vbi_height * 2;
+
return result;
}
}
diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h
index 80d9b4f..ba6fe5d 100644
--- a/drivers/media/video/em28xx/em28xx.h
+++ b/drivers/media/video/em28xx/em28xx.h
@@ -111,6 +111,7 @@
#define EM2861_BOARD_GADMEI_UTV330PLUS 72
#define EM2870_BOARD_REDDO_DVB_C_USB_BOX 73
#define EM2800_BOARD_VC211A 74
+#define EM2882_BOARD_DIKOM_DK300 75
/* Limits minimum and default number of buffers */
#define EM28XX_MIN_BUF 4
@@ -552,7 +553,8 @@
int capture_type;
int vbi_read;
unsigned char cur_field;
-
+ unsigned int vbi_width;
+ unsigned int vbi_height; /* lines per field */
struct work_struct request_module_wk;
@@ -693,6 +695,8 @@
int em28xx_get_key_em_haup(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw);
int em28xx_get_key_pinnacle_usb_grey(struct IR_i2c *ir, u32 *ir_key,
u32 *ir_raw);
+int em28xx_get_key_winfast_usbii_deluxe(struct IR_i2c *ir, u32 *ir_key,
+ u32 *ir_raw);
void em28xx_register_snapshot_button(struct em28xx *dev);
void em28xx_deregister_snapshot_button(struct em28xx *dev);
diff --git a/drivers/media/video/et61x251/Kconfig b/drivers/media/video/et61x251/Kconfig
index dcc1a03..87981b0 100644
--- a/drivers/media/video/et61x251/Kconfig
+++ b/drivers/media/video/et61x251/Kconfig
@@ -1,7 +1,11 @@
config USB_ET61X251
- tristate "USB ET61X[12]51 PC Camera Controller support"
+ tristate "USB ET61X[12]51 PC Camera Controller support (DEPRECATED)"
depends on VIDEO_V4L2
+ default n
---help---
+ This driver is DEPRECATED please use the gspca zc3xx module
+ instead.
+
Say Y here if you want support for cameras based on Etoms ET61X151
or ET61X251 PC Camera Controllers.
diff --git a/drivers/media/video/gspca/Kconfig b/drivers/media/video/gspca/Kconfig
index 609d65b..e0060c1 100644
--- a/drivers/media/video/gspca/Kconfig
+++ b/drivers/media/video/gspca/Kconfig
@@ -21,6 +21,15 @@
source "drivers/media/video/gspca/stv06xx/Kconfig"
source "drivers/media/video/gspca/gl860/Kconfig"
+config USB_GSPCA_BENQ
+ tristate "Benq USB Camera Driver"
+ depends on VIDEO_V4L2 && USB_GSPCA
+ help
+ Say Y here if you want support for the Benq DC E300 camera.
+
+ To compile this driver as a module, choose M here: the
+ module will be called gspca_benq.
+
config USB_GSPCA_CONEX
tristate "Conexant Camera Driver"
depends on VIDEO_V4L2 && USB_GSPCA
@@ -30,6 +39,17 @@
To compile this driver as a module, choose M here: the
module will be called gspca_conex.
+config USB_GSPCA_CPIA1
+ tristate "cpia CPiA (version 1) Camera Driver"
+ depends on VIDEO_V4L2 && USB_GSPCA
+ help
+ Say Y here if you want support for USB cameras based on the cpia
+ CPiA chip. Note that you need atleast version 0.6.4 of libv4l for
+ applications to understand the videoformat generated by this driver.
+
+ To compile this driver as a module, choose M here: the
+ module will be called gspca_cpia1.
+
config USB_GSPCA_ETOMS
tristate "Etoms USB Camera Driver"
depends on VIDEO_V4L2 && USB_GSPCA
@@ -86,15 +106,25 @@
module will be called gspca_ov519.
config USB_GSPCA_OV534
- tristate "OV534 USB Camera Driver"
+ tristate "OV534 OV772x USB Camera Driver"
depends on VIDEO_V4L2 && USB_GSPCA
help
- Say Y here if you want support for cameras based on the OV534 chip.
- (e.g. Sony Playstation EYE)
+ Say Y here if you want support for cameras based on the OV534 chip
+ and sensor OV772x (e.g. Sony Playstation EYE)
To compile this driver as a module, choose M here: the
module will be called gspca_ov534.
+config USB_GSPCA_OV534_9
+ tristate "OV534 OV965x USB Camera Driver"
+ depends on VIDEO_V4L2 && USB_GSPCA
+ help
+ Say Y here if you want support for cameras based on the OV534 chip
+ and sensor OV965x (e.g. Hercules Dualpix)
+
+ To compile this driver as a module, choose M here: the
+ module will be called gspca_ov534_9.
+
config USB_GSPCA_PAC207
tristate "Pixart PAC207 USB Camera Driver"
depends on VIDEO_V4L2 && USB_GSPCA
@@ -122,6 +152,16 @@
To compile this driver as a module, choose M here: the
module will be called gspca_pac7311.
+config USB_GSPCA_SN9C2028
+ tristate "SONIX Dual-Mode USB Camera Driver"
+ depends on VIDEO_V4L2 && USB_GSPCA
+ help
+ Say Y here if you want streaming support for Sonix SN9C2028 cameras.
+ These are supported as stillcams in libgphoto2/camlibs/sonix.
+
+ To compile this driver as a module, choose M here: the
+ module will be called gspca_sn9c2028.
+
config USB_GSPCA_SN9C20X
tristate "SN9C20X USB Camera Driver"
depends on VIDEO_V4L2 && USB_GSPCA
diff --git a/drivers/media/video/gspca/Makefile b/drivers/media/video/gspca/Makefile
index ff2c727..6e4cf1c 100644
--- a/drivers/media/video/gspca/Makefile
+++ b/drivers/media/video/gspca/Makefile
@@ -1,5 +1,7 @@
obj-$(CONFIG_USB_GSPCA) += gspca_main.o
+obj-$(CONFIG_USB_GSPCA_BENQ) += gspca_benq.o
obj-$(CONFIG_USB_GSPCA_CONEX) += gspca_conex.o
+obj-$(CONFIG_USB_GSPCA_CPIA1) += gspca_cpia1.o
obj-$(CONFIG_USB_GSPCA_ETOMS) += gspca_etoms.o
obj-$(CONFIG_USB_GSPCA_FINEPIX) += gspca_finepix.o
obj-$(CONFIG_USB_GSPCA_JEILINJ) += gspca_jeilinj.o
@@ -7,9 +9,11 @@
obj-$(CONFIG_USB_GSPCA_MR97310A) += gspca_mr97310a.o
obj-$(CONFIG_USB_GSPCA_OV519) += gspca_ov519.o
obj-$(CONFIG_USB_GSPCA_OV534) += gspca_ov534.o
+obj-$(CONFIG_USB_GSPCA_OV534_9) += gspca_ov534_9.o
obj-$(CONFIG_USB_GSPCA_PAC207) += gspca_pac207.o
obj-$(CONFIG_USB_GSPCA_PAC7302) += gspca_pac7302.o
obj-$(CONFIG_USB_GSPCA_PAC7311) += gspca_pac7311.o
+obj-$(CONFIG_USB_GSPCA_SN9C2028) += gspca_sn9c2028.o
obj-$(CONFIG_USB_GSPCA_SN9C20X) += gspca_sn9c20x.o
obj-$(CONFIG_USB_GSPCA_SONIXB) += gspca_sonixb.o
obj-$(CONFIG_USB_GSPCA_SONIXJ) += gspca_sonixj.o
@@ -30,7 +34,9 @@
obj-$(CONFIG_USB_GSPCA_ZC3XX) += gspca_zc3xx.o
gspca_main-objs := gspca.o
+gspca_benq-objs := benq.o
gspca_conex-objs := conex.o
+gspca_cpia1-objs := cpia1.o
gspca_etoms-objs := etoms.o
gspca_finepix-objs := finepix.o
gspca_jeilinj-objs := jeilinj.o
@@ -38,9 +44,11 @@
gspca_mr97310a-objs := mr97310a.o
gspca_ov519-objs := ov519.o
gspca_ov534-objs := ov534.o
+gspca_ov534_9-objs := ov534_9.o
gspca_pac207-objs := pac207.o
gspca_pac7302-objs := pac7302.o
gspca_pac7311-objs := pac7311.o
+gspca_sn9c2028-objs := sn9c2028.o
gspca_sn9c20x-objs := sn9c20x.o
gspca_sonixb-objs := sonixb.o
gspca_sonixj-objs := sonixj.o
diff --git a/drivers/media/video/gspca/benq.c b/drivers/media/video/gspca/benq.c
new file mode 100644
index 0000000..43ac4af
--- /dev/null
+++ b/drivers/media/video/gspca/benq.c
@@ -0,0 +1,322 @@
+/*
+ * Benq DC E300 subdriver
+ *
+ * Copyright (C) 2009 Jean-Francois Moine (http://moinejf.free.fr)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#define MODULE_NAME "benq"
+
+#include "gspca.h"
+
+MODULE_AUTHOR("Jean-Francois Moine <http://moinejf.free.fr>");
+MODULE_DESCRIPTION("Benq DC E300 USB Camera Driver");
+MODULE_LICENSE("GPL");
+
+/* specific webcam descriptor */
+struct sd {
+ struct gspca_dev gspca_dev; /* !! must be the first item */
+};
+
+/* V4L2 controls supported by the driver */
+static const struct ctrl sd_ctrls[] = {
+};
+
+static const struct v4l2_pix_format vga_mode[] = {
+ {320, 240, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+ .bytesperline = 320,
+ .sizeimage = 320 * 240 * 3 / 8 + 590,
+ .colorspace = V4L2_COLORSPACE_JPEG},
+};
+
+static void sd_isoc_irq(struct urb *urb);
+
+/* -- write a register -- */
+static void reg_w(struct gspca_dev *gspca_dev,
+ u16 value, u16 index)
+{
+ struct usb_device *dev = gspca_dev->dev;
+ int ret;
+
+ if (gspca_dev->usb_err < 0)
+ return;
+ ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+ 0x02,
+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ value,
+ index,
+ NULL,
+ 0,
+ 500);
+ if (ret < 0) {
+ PDEBUG(D_ERR, "reg_w err %d", ret);
+ gspca_dev->usb_err = ret;
+ }
+}
+
+/* this function is called at probe time */
+static int sd_config(struct gspca_dev *gspca_dev,
+ const struct usb_device_id *id)
+{
+ gspca_dev->cam.cam_mode = vga_mode;
+ gspca_dev->cam.nmodes = ARRAY_SIZE(vga_mode);
+ gspca_dev->cam.no_urb_create = 1;
+ gspca_dev->cam.reverse_alts = 1;
+ return 0;
+}
+
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
+{
+ return 0;
+}
+
+static int sd_isoc_init(struct gspca_dev *gspca_dev)
+{
+ int ret;
+
+ ret = usb_set_interface(gspca_dev->dev, gspca_dev->iface,
+ gspca_dev->nbalt - 1);
+ if (ret < 0) {
+ err("usb_set_interface failed");
+ return ret;
+ }
+/* reg_w(gspca_dev, 0x0003, 0x0002); */
+ return 0;
+}
+
+/* -- start the camera -- */
+static int sd_start(struct gspca_dev *gspca_dev)
+{
+ struct urb *urb;
+ int i, n;
+
+ /* create 4 URBs - 2 on endpoint 0x83 and 2 on 0x082 */
+#if MAX_NURBS < 4
+#error "Not enough URBs in the gspca table"
+#endif
+#define SD_PKT_SZ 64
+#define SD_NPKT 32
+ for (n = 0; n < 4; n++) {
+ urb = usb_alloc_urb(SD_NPKT, GFP_KERNEL);
+ if (!urb) {
+ err("usb_alloc_urb failed");
+ return -ENOMEM;
+ }
+ gspca_dev->urb[n] = urb;
+ urb->transfer_buffer = usb_buffer_alloc(gspca_dev->dev,
+ SD_PKT_SZ * SD_NPKT,
+ GFP_KERNEL,
+ &urb->transfer_dma);
+
+ if (urb->transfer_buffer == NULL) {
+ err("usb_buffer_alloc failed");
+ return -ENOMEM;
+ }
+ urb->dev = gspca_dev->dev;
+ urb->context = gspca_dev;
+ urb->transfer_buffer_length = SD_PKT_SZ * SD_NPKT;
+ urb->pipe = usb_rcvisocpipe(gspca_dev->dev,
+ n & 1 ? 0x82 : 0x83);
+ urb->transfer_flags = URB_ISO_ASAP
+ | URB_NO_TRANSFER_DMA_MAP;
+ urb->interval = 1;
+ urb->complete = sd_isoc_irq;
+ urb->number_of_packets = SD_NPKT;
+ for (i = 0; i < SD_NPKT; i++) {
+ urb->iso_frame_desc[i].length = SD_PKT_SZ;
+ urb->iso_frame_desc[i].offset = SD_PKT_SZ * i;
+ }
+ }
+
+ return gspca_dev->usb_err;
+}
+
+static void sd_stopN(struct gspca_dev *gspca_dev)
+{
+ reg_w(gspca_dev, 0x003c, 0x0003);
+ reg_w(gspca_dev, 0x003c, 0x0004);
+ reg_w(gspca_dev, 0x003c, 0x0005);
+ reg_w(gspca_dev, 0x003c, 0x0006);
+ reg_w(gspca_dev, 0x003c, 0x0007);
+ usb_set_interface(gspca_dev->dev, gspca_dev->iface, gspca_dev->nbalt - 1);
+}
+
+static void sd_pkt_scan(struct gspca_dev *gspca_dev,
+ u8 *data, /* isoc packet */
+ int len) /* iso packet length */
+{
+ /* unused */
+}
+
+/* reception of an URB */
+static void sd_isoc_irq(struct urb *urb)
+{
+ struct gspca_dev *gspca_dev = (struct gspca_dev *) urb->context;
+ struct urb *urb0;
+ u8 *data;
+ int i, st;
+
+ PDEBUG(D_PACK, "sd isoc irq");
+ if (!gspca_dev->streaming)
+ return;
+ if (urb->status != 0) {
+ if (urb->status == -ESHUTDOWN)
+ return; /* disconnection */
+#ifdef CONFIG_PM
+ if (gspca_dev->frozen)
+ return;
+#endif
+ PDEBUG(D_ERR|D_PACK, "urb status: %d", urb->status);
+ return;
+ }
+
+ /* if this is a control URN (ep 0x83), wait */
+ if (urb == gspca_dev->urb[0] || urb == gspca_dev->urb[2])
+ return;
+
+ /* scan both received URBs */
+ if (urb == gspca_dev->urb[1])
+ urb0 = gspca_dev->urb[0];
+ else
+ urb0 = gspca_dev->urb[2];
+ for (i = 0; i < urb->number_of_packets; i++) {
+
+ /* check the packet status and length */
+ if (urb0->iso_frame_desc[i].actual_length != SD_PKT_SZ
+ || urb->iso_frame_desc[i].actual_length != SD_PKT_SZ) {
+ PDEBUG(D_ERR, "ISOC bad lengths %d / %d",
+ urb0->iso_frame_desc[i].actual_length,
+ urb->iso_frame_desc[i].actual_length);
+ gspca_dev->last_packet_type = DISCARD_PACKET;
+ continue;
+ }
+ st = urb0->iso_frame_desc[i].status;
+ if (st == 0)
+ st = urb->iso_frame_desc[i].status;
+ if (st) {
+ PDEBUG(D_ERR,
+ "ISOC data error: [%d] status=%d",
+ i, st);
+ gspca_dev->last_packet_type = DISCARD_PACKET;
+ continue;
+ }
+
+ /*
+ * The images are received in URBs of different endpoints
+ * (0x83 and 0x82).
+ * Image pieces in URBs of ep 0x83 are continuated in URBs of
+ * ep 0x82 of the same index.
+ * The packets in the URBs of endpoint 0x83 start with:
+ * - 80 ba/bb 00 00 = start of image followed by 'ff d8'
+ * - 04 ba/bb oo oo = image piece
+ * where 'oo oo' is the image offset
+ (not cheked)
+ * - (other -> bad frame)
+ * The images are JPEG encoded with full header and
+ * normal ff escape.
+ * The end of image ('ff d9') may occur in any URB.
+ * (not cheked)
+ */
+ data = (u8 *) urb0->transfer_buffer
+ + urb0->iso_frame_desc[i].offset;
+ if (data[0] == 0x80 && (data[1] & 0xfe) == 0xba) {
+
+ /* new image */
+ gspca_frame_add(gspca_dev, LAST_PACKET,
+ NULL, 0);
+ gspca_frame_add(gspca_dev, FIRST_PACKET,
+ data + 4, SD_PKT_SZ - 4);
+ } else if (data[0] == 0x04 && (data[1] & 0xfe) == 0xba) {
+ gspca_frame_add(gspca_dev, INTER_PACKET,
+ data + 4, SD_PKT_SZ - 4);
+ } else {
+ gspca_dev->last_packet_type = DISCARD_PACKET;
+ continue;
+ }
+ data = (u8 *) urb->transfer_buffer
+ + urb->iso_frame_desc[i].offset;
+ gspca_frame_add(gspca_dev, INTER_PACKET,
+ data, SD_PKT_SZ);
+ }
+
+ /* resubmit the URBs */
+ st = usb_submit_urb(urb0, GFP_ATOMIC);
+ if (st < 0)
+ PDEBUG(D_ERR|D_PACK, "usb_submit_urb(0) ret %d", st);
+ st = usb_submit_urb(urb, GFP_ATOMIC);
+ if (st < 0)
+ PDEBUG(D_ERR|D_PACK, "usb_submit_urb() ret %d", st);
+}
+
+/* sub-driver description */
+static const struct sd_desc sd_desc = {
+ .name = MODULE_NAME,
+ .ctrls = sd_ctrls,
+ .nctrls = ARRAY_SIZE(sd_ctrls),
+ .config = sd_config,
+ .init = sd_init,
+ .isoc_init = sd_isoc_init,
+ .start = sd_start,
+ .stopN = sd_stopN,
+ .pkt_scan = sd_pkt_scan,
+};
+
+/* -- module initialisation -- */
+static const __devinitdata struct usb_device_id device_table[] = {
+ {USB_DEVICE(0x04a5, 0x3035)},
+ {}
+};
+MODULE_DEVICE_TABLE(usb, device_table);
+
+/* -- device connect -- */
+static int sd_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ return gspca_dev_probe(intf, id, &sd_desc, sizeof(struct sd),
+ THIS_MODULE);
+}
+
+static struct usb_driver sd_driver = {
+ .name = MODULE_NAME,
+ .id_table = device_table,
+ .probe = sd_probe,
+ .disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+ .suspend = gspca_suspend,
+ .resume = gspca_resume,
+#endif
+};
+
+/* -- module insert / remove -- */
+static int __init sd_mod_init(void)
+{
+ int ret;
+
+ ret = usb_register(&sd_driver);
+ if (ret < 0)
+ return ret;
+ info("registered");
+ return 0;
+}
+static void __exit sd_mod_exit(void)
+{
+ usb_deregister(&sd_driver);
+ info("deregistered");
+}
+
+module_init(sd_mod_init);
+module_exit(sd_mod_exit);
diff --git a/drivers/media/video/gspca/coarse_expo_autogain.h b/drivers/media/video/gspca/coarse_expo_autogain.h
new file mode 100644
index 0000000..1cb9d94
--- /dev/null
+++ b/drivers/media/video/gspca/coarse_expo_autogain.h
@@ -0,0 +1,116 @@
+/*
+ * Auto gain algorithm for camera's with a coarse exposure control
+ *
+ * Copyright (C) 2010 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+/* Autogain + exposure algorithm for cameras with a coarse exposure control
+ (usually this means we can only control the clockdiv to change exposure)
+ As changing the clockdiv so that the fps drops from 30 to 15 fps for
+ example, will lead to a huge exposure change (it effectively doubles),
+ this algorithm normally tries to only adjust the gain (between 40 and
+ 80 %) and if that does not help, only then changes exposure. This leads
+ to a much more stable image then using the knee algorithm which at
+ certain points of the knee graph will only try to adjust exposure,
+ which leads to oscilating as one exposure step is huge.
+
+ Note this assumes that the sd struct for the cam in question has
+ exp_too_high_cnt and exp_too_high_cnt int members for use by this function.
+
+ Returns 0 if no changes were made, 1 if the gain and or exposure settings
+ where changed. */
+static int gspca_coarse_grained_expo_autogain(struct gspca_dev *gspca_dev,
+ int avg_lum, int desired_avg_lum, int deadzone)
+{
+ int i, steps, gain, orig_gain, exposure, orig_exposure;
+ int gain_low, gain_high;
+ const struct ctrl *gain_ctrl = NULL;
+ const struct ctrl *exposure_ctrl = NULL;
+ struct sd *sd = (struct sd *) gspca_dev;
+ int retval = 0;
+
+ for (i = 0; i < gspca_dev->sd_desc->nctrls; i++) {
+ if (gspca_dev->ctrl_dis & (1 << i))
+ continue;
+ if (gspca_dev->sd_desc->ctrls[i].qctrl.id == V4L2_CID_GAIN)
+ gain_ctrl = &gspca_dev->sd_desc->ctrls[i];
+ if (gspca_dev->sd_desc->ctrls[i].qctrl.id == V4L2_CID_EXPOSURE)
+ exposure_ctrl = &gspca_dev->sd_desc->ctrls[i];
+ }
+ if (!gain_ctrl || !exposure_ctrl) {
+ PDEBUG(D_ERR, "Error: gspca_coarse_grained_expo_autogain "
+ "called on cam without gain or exposure");
+ return 0;
+ }
+
+ if (gain_ctrl->get(gspca_dev, &gain) ||
+ exposure_ctrl->get(gspca_dev, &exposure))
+ return 0;
+
+ orig_gain = gain;
+ orig_exposure = exposure;
+ gain_low =
+ (gain_ctrl->qctrl.maximum - gain_ctrl->qctrl.minimum) / 5 * 2;
+ gain_low += gain_ctrl->qctrl.minimum;
+ gain_high =
+ (gain_ctrl->qctrl.maximum - gain_ctrl->qctrl.minimum) / 5 * 4;
+ gain_high += gain_ctrl->qctrl.minimum;
+
+ /* If we are of a multiple of deadzone, do multiple steps to reach the
+ desired lumination fast (with the risc of a slight overshoot) */
+ steps = (desired_avg_lum - avg_lum) / deadzone;
+
+ PDEBUG(D_FRAM, "autogain: lum: %d, desired: %d, steps: %d",
+ avg_lum, desired_avg_lum, steps);
+
+ if ((gain + steps) > gain_high &&
+ sd->exposure < exposure_ctrl->qctrl.maximum) {
+ gain = gain_high;
+ sd->exp_too_low_cnt++;
+ } else if ((gain + steps) < gain_low &&
+ sd->exposure > exposure_ctrl->qctrl.minimum) {
+ gain = gain_low;
+ sd->exp_too_high_cnt++;
+ } else {
+ gain += steps;
+ if (gain > gain_ctrl->qctrl.maximum)
+ gain = gain_ctrl->qctrl.maximum;
+ else if (gain < gain_ctrl->qctrl.minimum)
+ gain = gain_ctrl->qctrl.minimum;
+ sd->exp_too_high_cnt = 0;
+ sd->exp_too_low_cnt = 0;
+ }
+
+ if (sd->exp_too_high_cnt > 3) {
+ exposure--;
+ sd->exp_too_high_cnt = 0;
+ } else if (sd->exp_too_low_cnt > 3) {
+ exposure++;
+ sd->exp_too_low_cnt = 0;
+ }
+
+ if (gain != orig_gain) {
+ gain_ctrl->set(gspca_dev, gain);
+ retval = 1;
+ }
+ if (exposure != orig_exposure) {
+ exposure_ctrl->set(gspca_dev, exposure);
+ retval = 1;
+ }
+
+ return retval;
+}
diff --git a/drivers/media/video/gspca/conex.c b/drivers/media/video/gspca/conex.c
index c98b5d6..19fe6b2 100644
--- a/drivers/media/video/gspca/conex.c
+++ b/drivers/media/video/gspca/conex.c
@@ -52,7 +52,7 @@
static int sd_setcolors(struct gspca_dev *gspca_dev, __s32 val);
static int sd_getcolors(struct gspca_dev *gspca_dev, __s32 *val);
-static struct ctrl sd_ctrls[] = {
+static const struct ctrl sd_ctrls[] = {
{
{
.id = V4L2_CID_BRIGHTNESS,
@@ -1032,7 +1032,7 @@
}
/* sub-driver description */
-static struct sd_desc sd_desc = {
+static const struct sd_desc sd_desc = {
.name = MODULE_NAME,
.ctrls = sd_ctrls,
.nctrls = ARRAY_SIZE(sd_ctrls),
diff --git a/drivers/media/video/gspca/cpia1.c b/drivers/media/video/gspca/cpia1.c
new file mode 100644
index 0000000..82945ed
--- /dev/null
+++ b/drivers/media/video/gspca/cpia1.c
@@ -0,0 +1,2022 @@
+/*
+ * cpia CPiA (1) gspca driver
+ *
+ * Copyright (C) 2010 Hans de Goede <hdgoede@redhat.com>
+ *
+ * This module is adapted from the in kernel v4l1 cpia driver which is :
+ *
+ * (C) Copyright 1999-2000 Peter Pregler
+ * (C) Copyright 1999-2000 Scott J. Bertin
+ * (C) Copyright 1999-2000 Johannes Erdfelt <johannes@erdfelt.com>
+ * (C) Copyright 2000 STMicroelectronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#define MODULE_NAME "cpia1"
+
+#include "gspca.h"
+
+MODULE_AUTHOR("Hans de Goede <hdgoede@redhat.com>");
+MODULE_DESCRIPTION("Vision CPiA");
+MODULE_LICENSE("GPL");
+
+/* constant value's */
+#define MAGIC_0 0x19
+#define MAGIC_1 0x68
+#define DATA_IN 0xC0
+#define DATA_OUT 0x40
+#define VIDEOSIZE_QCIF 0 /* 176x144 */
+#define VIDEOSIZE_CIF 1 /* 352x288 */
+#define SUBSAMPLE_420 0
+#define SUBSAMPLE_422 1
+#define YUVORDER_YUYV 0
+#define YUVORDER_UYVY 1
+#define NOT_COMPRESSED 0
+#define COMPRESSED 1
+#define NO_DECIMATION 0
+#define DECIMATION_ENAB 1
+#define EOI 0xff /* End Of Image */
+#define EOL 0xfd /* End Of Line */
+#define FRAME_HEADER_SIZE 64
+
+/* Image grab modes */
+#define CPIA_GRAB_SINGLE 0
+#define CPIA_GRAB_CONTINEOUS 1
+
+/* Compression parameters */
+#define CPIA_COMPRESSION_NONE 0
+#define CPIA_COMPRESSION_AUTO 1
+#define CPIA_COMPRESSION_MANUAL 2
+#define CPIA_COMPRESSION_TARGET_QUALITY 0
+#define CPIA_COMPRESSION_TARGET_FRAMERATE 1
+
+/* Return offsets for GetCameraState */
+#define SYSTEMSTATE 0
+#define GRABSTATE 1
+#define STREAMSTATE 2
+#define FATALERROR 3
+#define CMDERROR 4
+#define DEBUGFLAGS 5
+#define VPSTATUS 6
+#define ERRORCODE 7
+
+/* SystemState */
+#define UNINITIALISED_STATE 0
+#define PASS_THROUGH_STATE 1
+#define LO_POWER_STATE 2
+#define HI_POWER_STATE 3
+#define WARM_BOOT_STATE 4
+
+/* GrabState */
+#define GRAB_IDLE 0
+#define GRAB_ACTIVE 1
+#define GRAB_DONE 2
+
+/* StreamState */
+#define STREAM_NOT_READY 0
+#define STREAM_READY 1
+#define STREAM_OPEN 2
+#define STREAM_PAUSED 3
+#define STREAM_FINISHED 4
+
+/* Fatal Error, CmdError, and DebugFlags */
+#define CPIA_FLAG 1
+#define SYSTEM_FLAG 2
+#define INT_CTRL_FLAG 4
+#define PROCESS_FLAG 8
+#define COM_FLAG 16
+#define VP_CTRL_FLAG 32
+#define CAPTURE_FLAG 64
+#define DEBUG_FLAG 128
+
+/* VPStatus */
+#define VP_STATE_OK 0x00
+
+#define VP_STATE_FAILED_VIDEOINIT 0x01
+#define VP_STATE_FAILED_AECACBINIT 0x02
+#define VP_STATE_AEC_MAX 0x04
+#define VP_STATE_ACB_BMAX 0x08
+
+#define VP_STATE_ACB_RMIN 0x10
+#define VP_STATE_ACB_GMIN 0x20
+#define VP_STATE_ACB_RMAX 0x40
+#define VP_STATE_ACB_GMAX 0x80
+
+/* default (minimum) compensation values */
+#define COMP_RED 220
+#define COMP_GREEN1 214
+#define COMP_GREEN2 COMP_GREEN1
+#define COMP_BLUE 230
+
+/* exposure status */
+#define EXPOSURE_VERY_LIGHT 0
+#define EXPOSURE_LIGHT 1
+#define EXPOSURE_NORMAL 2
+#define EXPOSURE_DARK 3
+#define EXPOSURE_VERY_DARK 4
+
+#define CPIA_MODULE_CPIA (0 << 5)
+#define CPIA_MODULE_SYSTEM (1 << 5)
+#define CPIA_MODULE_VP_CTRL (5 << 5)
+#define CPIA_MODULE_CAPTURE (6 << 5)
+#define CPIA_MODULE_DEBUG (7 << 5)
+
+#define INPUT (DATA_IN << 8)
+#define OUTPUT (DATA_OUT << 8)
+
+#define CPIA_COMMAND_GetCPIAVersion (INPUT | CPIA_MODULE_CPIA | 1)
+#define CPIA_COMMAND_GetPnPID (INPUT | CPIA_MODULE_CPIA | 2)
+#define CPIA_COMMAND_GetCameraStatus (INPUT | CPIA_MODULE_CPIA | 3)
+#define CPIA_COMMAND_GotoHiPower (OUTPUT | CPIA_MODULE_CPIA | 4)
+#define CPIA_COMMAND_GotoLoPower (OUTPUT | CPIA_MODULE_CPIA | 5)
+#define CPIA_COMMAND_GotoSuspend (OUTPUT | CPIA_MODULE_CPIA | 7)
+#define CPIA_COMMAND_GotoPassThrough (OUTPUT | CPIA_MODULE_CPIA | 8)
+#define CPIA_COMMAND_ModifyCameraStatus (OUTPUT | CPIA_MODULE_CPIA | 10)
+
+#define CPIA_COMMAND_ReadVCRegs (INPUT | CPIA_MODULE_SYSTEM | 1)
+#define CPIA_COMMAND_WriteVCReg (OUTPUT | CPIA_MODULE_SYSTEM | 2)
+#define CPIA_COMMAND_ReadMCPorts (INPUT | CPIA_MODULE_SYSTEM | 3)
+#define CPIA_COMMAND_WriteMCPort (OUTPUT | CPIA_MODULE_SYSTEM | 4)
+#define CPIA_COMMAND_SetBaudRate (OUTPUT | CPIA_MODULE_SYSTEM | 5)
+#define CPIA_COMMAND_SetECPTiming (OUTPUT | CPIA_MODULE_SYSTEM | 6)
+#define CPIA_COMMAND_ReadIDATA (INPUT | CPIA_MODULE_SYSTEM | 7)
+#define CPIA_COMMAND_WriteIDATA (OUTPUT | CPIA_MODULE_SYSTEM | 8)
+#define CPIA_COMMAND_GenericCall (OUTPUT | CPIA_MODULE_SYSTEM | 9)
+#define CPIA_COMMAND_I2CStart (OUTPUT | CPIA_MODULE_SYSTEM | 10)
+#define CPIA_COMMAND_I2CStop (OUTPUT | CPIA_MODULE_SYSTEM | 11)
+#define CPIA_COMMAND_I2CWrite (OUTPUT | CPIA_MODULE_SYSTEM | 12)
+#define CPIA_COMMAND_I2CRead (INPUT | CPIA_MODULE_SYSTEM | 13)
+
+#define CPIA_COMMAND_GetVPVersion (INPUT | CPIA_MODULE_VP_CTRL | 1)
+#define CPIA_COMMAND_ResetFrameCounter (INPUT | CPIA_MODULE_VP_CTRL | 2)
+#define CPIA_COMMAND_SetColourParams (OUTPUT | CPIA_MODULE_VP_CTRL | 3)
+#define CPIA_COMMAND_SetExposure (OUTPUT | CPIA_MODULE_VP_CTRL | 4)
+#define CPIA_COMMAND_SetColourBalance (OUTPUT | CPIA_MODULE_VP_CTRL | 6)
+#define CPIA_COMMAND_SetSensorFPS (OUTPUT | CPIA_MODULE_VP_CTRL | 7)
+#define CPIA_COMMAND_SetVPDefaults (OUTPUT | CPIA_MODULE_VP_CTRL | 8)
+#define CPIA_COMMAND_SetApcor (OUTPUT | CPIA_MODULE_VP_CTRL | 9)
+#define CPIA_COMMAND_SetFlickerCtrl (OUTPUT | CPIA_MODULE_VP_CTRL | 10)
+#define CPIA_COMMAND_SetVLOffset (OUTPUT | CPIA_MODULE_VP_CTRL | 11)
+#define CPIA_COMMAND_GetColourParams (INPUT | CPIA_MODULE_VP_CTRL | 16)
+#define CPIA_COMMAND_GetColourBalance (INPUT | CPIA_MODULE_VP_CTRL | 17)
+#define CPIA_COMMAND_GetExposure (INPUT | CPIA_MODULE_VP_CTRL | 18)
+#define CPIA_COMMAND_SetSensorMatrix (OUTPUT | CPIA_MODULE_VP_CTRL | 19)
+#define CPIA_COMMAND_ColourBars (OUTPUT | CPIA_MODULE_VP_CTRL | 25)
+#define CPIA_COMMAND_ReadVPRegs (INPUT | CPIA_MODULE_VP_CTRL | 30)
+#define CPIA_COMMAND_WriteVPReg (OUTPUT | CPIA_MODULE_VP_CTRL | 31)
+
+#define CPIA_COMMAND_GrabFrame (OUTPUT | CPIA_MODULE_CAPTURE | 1)
+#define CPIA_COMMAND_UploadFrame (OUTPUT | CPIA_MODULE_CAPTURE | 2)
+#define CPIA_COMMAND_SetGrabMode (OUTPUT | CPIA_MODULE_CAPTURE | 3)
+#define CPIA_COMMAND_InitStreamCap (OUTPUT | CPIA_MODULE_CAPTURE | 4)
+#define CPIA_COMMAND_FiniStreamCap (OUTPUT | CPIA_MODULE_CAPTURE | 5)
+#define CPIA_COMMAND_StartStreamCap (OUTPUT | CPIA_MODULE_CAPTURE | 6)
+#define CPIA_COMMAND_EndStreamCap (OUTPUT | CPIA_MODULE_CAPTURE | 7)
+#define CPIA_COMMAND_SetFormat (OUTPUT | CPIA_MODULE_CAPTURE | 8)
+#define CPIA_COMMAND_SetROI (OUTPUT | CPIA_MODULE_CAPTURE | 9)
+#define CPIA_COMMAND_SetCompression (OUTPUT | CPIA_MODULE_CAPTURE | 10)
+#define CPIA_COMMAND_SetCompressionTarget (OUTPUT | CPIA_MODULE_CAPTURE | 11)
+#define CPIA_COMMAND_SetYUVThresh (OUTPUT | CPIA_MODULE_CAPTURE | 12)
+#define CPIA_COMMAND_SetCompressionParams (OUTPUT | CPIA_MODULE_CAPTURE | 13)
+#define CPIA_COMMAND_DiscardFrame (OUTPUT | CPIA_MODULE_CAPTURE | 14)
+#define CPIA_COMMAND_GrabReset (OUTPUT | CPIA_MODULE_CAPTURE | 15)
+
+#define CPIA_COMMAND_OutputRS232 (OUTPUT | CPIA_MODULE_DEBUG | 1)
+#define CPIA_COMMAND_AbortProcess (OUTPUT | CPIA_MODULE_DEBUG | 4)
+#define CPIA_COMMAND_SetDramPage (OUTPUT | CPIA_MODULE_DEBUG | 5)
+#define CPIA_COMMAND_StartDramUpload (OUTPUT | CPIA_MODULE_DEBUG | 6)
+#define CPIA_COMMAND_StartDummyDtream (OUTPUT | CPIA_MODULE_DEBUG | 8)
+#define CPIA_COMMAND_AbortStream (OUTPUT | CPIA_MODULE_DEBUG | 9)
+#define CPIA_COMMAND_DownloadDRAM (OUTPUT | CPIA_MODULE_DEBUG | 10)
+#define CPIA_COMMAND_Null (OUTPUT | CPIA_MODULE_DEBUG | 11)
+
+#define ROUND_UP_EXP_FOR_FLICKER 15
+
+/* Constants for automatic frame rate adjustment */
+#define MAX_EXP 302
+#define MAX_EXP_102 255
+#define LOW_EXP 140
+#define VERY_LOW_EXP 70
+#define TC 94
+#define EXP_ACC_DARK 50
+#define EXP_ACC_LIGHT 90
+#define HIGH_COMP_102 160
+#define MAX_COMP 239
+#define DARK_TIME 3
+#define LIGHT_TIME 3
+
+#define FIRMWARE_VERSION(x, y) (sd->params.version.firmwareVersion == (x) && \
+ sd->params.version.firmwareRevision == (y))
+
+/* Developer's Guide Table 5 p 3-34
+ * indexed by [mains][sensorFps.baserate][sensorFps.divisor]*/
+static u8 flicker_jumps[2][2][4] =
+{ { { 76, 38, 19, 9 }, { 92, 46, 23, 11 } },
+ { { 64, 32, 16, 8 }, { 76, 38, 19, 9} }
+};
+
+struct cam_params {
+ struct {
+ u8 firmwareVersion;
+ u8 firmwareRevision;
+ u8 vcVersion;
+ u8 vcRevision;
+ } version;
+ struct {
+ u16 vendor;
+ u16 product;
+ u16 deviceRevision;
+ } pnpID;
+ struct {
+ u8 vpVersion;
+ u8 vpRevision;
+ u16 cameraHeadID;
+ } vpVersion;
+ struct {
+ u8 systemState;
+ u8 grabState;
+ u8 streamState;
+ u8 fatalError;
+ u8 cmdError;
+ u8 debugFlags;
+ u8 vpStatus;
+ u8 errorCode;
+ } status;
+ struct {
+ u8 brightness;
+ u8 contrast;
+ u8 saturation;
+ } colourParams;
+ struct {
+ u8 gainMode;
+ u8 expMode;
+ u8 compMode;
+ u8 centreWeight;
+ u8 gain;
+ u8 fineExp;
+ u8 coarseExpLo;
+ u8 coarseExpHi;
+ u8 redComp;
+ u8 green1Comp;
+ u8 green2Comp;
+ u8 blueComp;
+ } exposure;
+ struct {
+ u8 balanceMode;
+ u8 redGain;
+ u8 greenGain;
+ u8 blueGain;
+ } colourBalance;
+ struct {
+ u8 divisor;
+ u8 baserate;
+ } sensorFps;
+ struct {
+ u8 gain1;
+ u8 gain2;
+ u8 gain4;
+ u8 gain8;
+ } apcor;
+ struct {
+ u8 disabled;
+ u8 flickerMode;
+ u8 coarseJump;
+ u8 allowableOverExposure;
+ } flickerControl;
+ struct {
+ u8 gain1;
+ u8 gain2;
+ u8 gain4;
+ u8 gain8;
+ } vlOffset;
+ struct {
+ u8 mode;
+ u8 decimation;
+ } compression;
+ struct {
+ u8 frTargeting;
+ u8 targetFR;
+ u8 targetQ;
+ } compressionTarget;
+ struct {
+ u8 yThreshold;
+ u8 uvThreshold;
+ } yuvThreshold;
+ struct {
+ u8 hysteresis;
+ u8 threshMax;
+ u8 smallStep;
+ u8 largeStep;
+ u8 decimationHysteresis;
+ u8 frDiffStepThresh;
+ u8 qDiffStepThresh;
+ u8 decimationThreshMod;
+ } compressionParams;
+ struct {
+ u8 videoSize; /* CIF/QCIF */
+ u8 subSample;
+ u8 yuvOrder;
+ } format;
+ struct { /* Intel QX3 specific data */
+ u8 qx3_detected; /* a QX3 is present */
+ u8 toplight; /* top light lit , R/W */
+ u8 bottomlight; /* bottom light lit, R/W */
+ u8 button; /* snapshot button pressed (R/O) */
+ u8 cradled; /* microscope is in cradle (R/O) */
+ } qx3;
+ struct {
+ u8 colStart; /* skip first 8*colStart pixels */
+ u8 colEnd; /* finish at 8*colEnd pixels */
+ u8 rowStart; /* skip first 4*rowStart lines */
+ u8 rowEnd; /* finish at 4*rowEnd lines */
+ } roi;
+ u8 ecpTiming;
+ u8 streamStartLine;
+};
+
+/* specific webcam descriptor */
+struct sd {
+ struct gspca_dev gspca_dev; /* !! must be the first item */
+ struct cam_params params; /* camera settings */
+
+ atomic_t cam_exposure;
+ atomic_t fps;
+ int exposure_count;
+ u8 exposure_status;
+ u8 mainsFreq; /* 0 = 50hz, 1 = 60hz */
+ u8 first_frame;
+ u8 freq;
+};
+
+/* V4L2 controls supported by the driver */
+static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_setcontrast(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getcontrast(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_setsaturation(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getsaturation(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_setfreq(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getfreq(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_setcomptarget(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getcomptarget(struct gspca_dev *gspca_dev, __s32 *val);
+
+static struct ctrl sd_ctrls[] = {
+ {
+ {
+ .id = V4L2_CID_BRIGHTNESS,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Brightness",
+ .minimum = 0,
+ .maximum = 100,
+ .step = 1,
+#define BRIGHTNESS_DEF 50
+ .default_value = BRIGHTNESS_DEF,
+ .flags = 0,
+ },
+ .set = sd_setbrightness,
+ .get = sd_getbrightness,
+ },
+ {
+ {
+ .id = V4L2_CID_CONTRAST,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Contrast",
+ .minimum = 0,
+ .maximum = 96,
+ .step = 8,
+#define CONTRAST_DEF 48
+ .default_value = CONTRAST_DEF,
+ },
+ .set = sd_setcontrast,
+ .get = sd_getcontrast,
+ },
+ {
+ {
+ .id = V4L2_CID_SATURATION,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Saturation",
+ .minimum = 0,
+ .maximum = 100,
+ .step = 1,
+#define SATURATION_DEF 50
+ .default_value = SATURATION_DEF,
+ },
+ .set = sd_setsaturation,
+ .get = sd_getsaturation,
+ },
+ {
+ {
+ .id = V4L2_CID_POWER_LINE_FREQUENCY,
+ .type = V4L2_CTRL_TYPE_MENU,
+ .name = "Light frequency filter",
+ .minimum = 0,
+ .maximum = 2, /* 0: 0, 1: 50Hz, 2:60Hz */
+ .step = 1,
+#define FREQ_DEF 1
+ .default_value = FREQ_DEF,
+ },
+ .set = sd_setfreq,
+ .get = sd_getfreq,
+ },
+ {
+ {
+#define V4L2_CID_COMP_TARGET V4L2_CID_PRIVATE_BASE
+ .id = V4L2_CID_COMP_TARGET,
+ .type = V4L2_CTRL_TYPE_MENU,
+ .name = "Compression Target",
+ .minimum = 0,
+ .maximum = 1,
+ .step = 1,
+#define COMP_TARGET_DEF CPIA_COMPRESSION_TARGET_QUALITY
+ .default_value = COMP_TARGET_DEF,
+ },
+ .set = sd_setcomptarget,
+ .get = sd_getcomptarget,
+ },
+};
+
+static const struct v4l2_pix_format mode[] = {
+ {160, 120, V4L2_PIX_FMT_CPIA1, V4L2_FIELD_NONE,
+ /* The sizeimage is trial and error, as with low framerates
+ the camera will pad out usb frames, making the image
+ data larger then strictly necessary */
+ .bytesperline = 160,
+ .sizeimage = 65536,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .priv = 3},
+ {176, 144, V4L2_PIX_FMT_CPIA1, V4L2_FIELD_NONE,
+ .bytesperline = 172,
+ .sizeimage = 65536,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .priv = 2},
+ {320, 240, V4L2_PIX_FMT_CPIA1, V4L2_FIELD_NONE,
+ .bytesperline = 320,
+ .sizeimage = 262144,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .priv = 1},
+ {352, 288, V4L2_PIX_FMT_CPIA1, V4L2_FIELD_NONE,
+ .bytesperline = 352,
+ .sizeimage = 262144,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .priv = 0},
+};
+
+/**********************************************************************
+ *
+ * General functions
+ *
+ **********************************************************************/
+
+static int cpia_usb_transferCmd(struct gspca_dev *gspca_dev, u8 *command)
+{
+ u8 requesttype;
+ unsigned int pipe;
+ int ret, databytes = command[6] | (command[7] << 8);
+ /* Sometimes we see spurious EPIPE errors */
+ int retries = 3;
+
+ if (command[0] == DATA_IN) {
+ pipe = usb_rcvctrlpipe(gspca_dev->dev, 0);
+ requesttype = USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE;
+ } else if (command[0] == DATA_OUT) {
+ pipe = usb_sndctrlpipe(gspca_dev->dev, 0);
+ requesttype = USB_TYPE_VENDOR | USB_RECIP_DEVICE;
+ } else {
+ PDEBUG(D_ERR, "Unexpected first byte of command: %x",
+ command[0]);
+ return -EINVAL;
+ }
+
+retry:
+ ret = usb_control_msg(gspca_dev->dev, pipe,
+ command[1],
+ requesttype,
+ command[2] | (command[3] << 8),
+ command[4] | (command[5] << 8),
+ gspca_dev->usb_buf, databytes, 1000);
+
+ if (ret < 0)
+ PDEBUG(D_ERR, "usb_control_msg %02x, error %d", command[1],
+ ret);
+
+ if (ret == -EPIPE && retries > 0) {
+ retries--;
+ goto retry;
+ }
+
+ return (ret < 0) ? ret : 0;
+}
+
+/* send an arbitrary command to the camera */
+static int do_command(struct gspca_dev *gspca_dev, u16 command,
+ u8 a, u8 b, u8 c, u8 d)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ int ret, datasize;
+ u8 cmd[8];
+
+ switch (command) {
+ case CPIA_COMMAND_GetCPIAVersion:
+ case CPIA_COMMAND_GetPnPID:
+ case CPIA_COMMAND_GetCameraStatus:
+ case CPIA_COMMAND_GetVPVersion:
+ case CPIA_COMMAND_GetColourParams:
+ case CPIA_COMMAND_GetColourBalance:
+ case CPIA_COMMAND_GetExposure:
+ datasize = 8;
+ break;
+ case CPIA_COMMAND_ReadMCPorts:
+ case CPIA_COMMAND_ReadVCRegs:
+ datasize = 4;
+ break;
+ default:
+ datasize = 0;
+ break;
+ }
+
+ cmd[0] = command >> 8;
+ cmd[1] = command & 0xff;
+ cmd[2] = a;
+ cmd[3] = b;
+ cmd[4] = c;
+ cmd[5] = d;
+ cmd[6] = datasize;
+ cmd[7] = 0;
+
+ ret = cpia_usb_transferCmd(gspca_dev, cmd);
+ if (ret)
+ return ret;
+
+ switch (command) {
+ case CPIA_COMMAND_GetCPIAVersion:
+ sd->params.version.firmwareVersion = gspca_dev->usb_buf[0];
+ sd->params.version.firmwareRevision = gspca_dev->usb_buf[1];
+ sd->params.version.vcVersion = gspca_dev->usb_buf[2];
+ sd->params.version.vcRevision = gspca_dev->usb_buf[3];
+ break;
+ case CPIA_COMMAND_GetPnPID:
+ sd->params.pnpID.vendor =
+ gspca_dev->usb_buf[0] | (gspca_dev->usb_buf[1] << 8);
+ sd->params.pnpID.product =
+ gspca_dev->usb_buf[2] | (gspca_dev->usb_buf[3] << 8);
+ sd->params.pnpID.deviceRevision =
+ gspca_dev->usb_buf[4] | (gspca_dev->usb_buf[5] << 8);
+ break;
+ case CPIA_COMMAND_GetCameraStatus:
+ sd->params.status.systemState = gspca_dev->usb_buf[0];
+ sd->params.status.grabState = gspca_dev->usb_buf[1];
+ sd->params.status.streamState = gspca_dev->usb_buf[2];
+ sd->params.status.fatalError = gspca_dev->usb_buf[3];
+ sd->params.status.cmdError = gspca_dev->usb_buf[4];
+ sd->params.status.debugFlags = gspca_dev->usb_buf[5];
+ sd->params.status.vpStatus = gspca_dev->usb_buf[6];
+ sd->params.status.errorCode = gspca_dev->usb_buf[7];
+ break;
+ case CPIA_COMMAND_GetVPVersion:
+ sd->params.vpVersion.vpVersion = gspca_dev->usb_buf[0];
+ sd->params.vpVersion.vpRevision = gspca_dev->usb_buf[1];
+ sd->params.vpVersion.cameraHeadID =
+ gspca_dev->usb_buf[2] | (gspca_dev->usb_buf[3] << 8);
+ break;
+ case CPIA_COMMAND_GetColourParams:
+ sd->params.colourParams.brightness = gspca_dev->usb_buf[0];
+ sd->params.colourParams.contrast = gspca_dev->usb_buf[1];
+ sd->params.colourParams.saturation = gspca_dev->usb_buf[2];
+ break;
+ case CPIA_COMMAND_GetColourBalance:
+ sd->params.colourBalance.redGain = gspca_dev->usb_buf[0];
+ sd->params.colourBalance.greenGain = gspca_dev->usb_buf[1];
+ sd->params.colourBalance.blueGain = gspca_dev->usb_buf[2];
+ break;
+ case CPIA_COMMAND_GetExposure:
+ sd->params.exposure.gain = gspca_dev->usb_buf[0];
+ sd->params.exposure.fineExp = gspca_dev->usb_buf[1];
+ sd->params.exposure.coarseExpLo = gspca_dev->usb_buf[2];
+ sd->params.exposure.coarseExpHi = gspca_dev->usb_buf[3];
+ sd->params.exposure.redComp = gspca_dev->usb_buf[4];
+ sd->params.exposure.green1Comp = gspca_dev->usb_buf[5];
+ sd->params.exposure.green2Comp = gspca_dev->usb_buf[6];
+ sd->params.exposure.blueComp = gspca_dev->usb_buf[7];
+ break;
+
+ case CPIA_COMMAND_ReadMCPorts:
+ if (!sd->params.qx3.qx3_detected)
+ break;
+ /* test button press */
+ sd->params.qx3.button = ((gspca_dev->usb_buf[1] & 0x02) == 0);
+ if (sd->params.qx3.button) {
+ /* button pressed - unlock the latch */
+ do_command(gspca_dev, CPIA_COMMAND_WriteMCPort,
+ 3, 0xDF, 0xDF, 0);
+ do_command(gspca_dev, CPIA_COMMAND_WriteMCPort,
+ 3, 0xFF, 0xFF, 0);
+ }
+
+ /* test whether microscope is cradled */
+ sd->params.qx3.cradled = ((gspca_dev->usb_buf[2] & 0x40) == 0);
+ break;
+ }
+
+ return 0;
+}
+
+/* send a command to the camera with an additional data transaction */
+static int do_command_extended(struct gspca_dev *gspca_dev, u16 command,
+ u8 a, u8 b, u8 c, u8 d,
+ u8 e, u8 f, u8 g, u8 h,
+ u8 i, u8 j, u8 k, u8 l)
+{
+ u8 cmd[8];
+
+ cmd[0] = command >> 8;
+ cmd[1] = command & 0xff;
+ cmd[2] = a;
+ cmd[3] = b;
+ cmd[4] = c;
+ cmd[5] = d;
+ cmd[6] = 8;
+ cmd[7] = 0;
+ gspca_dev->usb_buf[0] = e;
+ gspca_dev->usb_buf[1] = f;
+ gspca_dev->usb_buf[2] = g;
+ gspca_dev->usb_buf[3] = h;
+ gspca_dev->usb_buf[4] = i;
+ gspca_dev->usb_buf[5] = j;
+ gspca_dev->usb_buf[6] = k;
+ gspca_dev->usb_buf[7] = l;
+
+ return cpia_usb_transferCmd(gspca_dev, cmd);
+}
+
+/* find_over_exposure
+ * Finds a suitable value of OverExposure for use with SetFlickerCtrl
+ * Some calculation is required because this value changes with the brightness
+ * set with SetColourParameters
+ *
+ * Parameters: Brightness - last brightness value set with SetColourParameters
+ *
+ * Returns: OverExposure value to use with SetFlickerCtrl
+ */
+#define FLICKER_MAX_EXPOSURE 250
+#define FLICKER_ALLOWABLE_OVER_EXPOSURE 146
+#define FLICKER_BRIGHTNESS_CONSTANT 59
+static int find_over_exposure(int brightness)
+{
+ int MaxAllowableOverExposure, OverExposure;
+
+ MaxAllowableOverExposure = FLICKER_MAX_EXPOSURE - brightness -
+ FLICKER_BRIGHTNESS_CONSTANT;
+
+ if (MaxAllowableOverExposure < FLICKER_ALLOWABLE_OVER_EXPOSURE)
+ OverExposure = MaxAllowableOverExposure;
+ else
+ OverExposure = FLICKER_ALLOWABLE_OVER_EXPOSURE;
+
+ return OverExposure;
+}
+#undef FLICKER_MAX_EXPOSURE
+#undef FLICKER_ALLOWABLE_OVER_EXPOSURE
+#undef FLICKER_BRIGHTNESS_CONSTANT
+
+/* initialise cam_data structure */
+static void reset_camera_params(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ struct cam_params *params = &sd->params;
+
+ /* The following parameter values are the defaults from
+ * "Software Developer's Guide for CPiA Cameras". Any changes
+ * to the defaults are noted in comments. */
+ params->colourParams.brightness = BRIGHTNESS_DEF;
+ params->colourParams.contrast = CONTRAST_DEF;
+ params->colourParams.saturation = SATURATION_DEF;
+ params->exposure.gainMode = 4;
+ params->exposure.expMode = 2; /* AEC */
+ params->exposure.compMode = 1;
+ params->exposure.centreWeight = 1;
+ params->exposure.gain = 0;
+ params->exposure.fineExp = 0;
+ params->exposure.coarseExpLo = 185;
+ params->exposure.coarseExpHi = 0;
+ params->exposure.redComp = COMP_RED;
+ params->exposure.green1Comp = COMP_GREEN1;
+ params->exposure.green2Comp = COMP_GREEN2;
+ params->exposure.blueComp = COMP_BLUE;
+ params->colourBalance.balanceMode = 2; /* ACB */
+ params->colourBalance.redGain = 32;
+ params->colourBalance.greenGain = 6;
+ params->colourBalance.blueGain = 92;
+ params->apcor.gain1 = 0x18;
+ params->apcor.gain2 = 0x16;
+ params->apcor.gain4 = 0x24;
+ params->apcor.gain8 = 0x34;
+ params->flickerControl.flickerMode = 0;
+ params->flickerControl.disabled = 1;
+
+ params->flickerControl.coarseJump =
+ flicker_jumps[sd->mainsFreq]
+ [params->sensorFps.baserate]
+ [params->sensorFps.divisor];
+ params->flickerControl.allowableOverExposure =
+ find_over_exposure(params->colourParams.brightness);
+ params->vlOffset.gain1 = 20;
+ params->vlOffset.gain2 = 24;
+ params->vlOffset.gain4 = 26;
+ params->vlOffset.gain8 = 26;
+ params->compressionParams.hysteresis = 3;
+ params->compressionParams.threshMax = 11;
+ params->compressionParams.smallStep = 1;
+ params->compressionParams.largeStep = 3;
+ params->compressionParams.decimationHysteresis = 2;
+ params->compressionParams.frDiffStepThresh = 5;
+ params->compressionParams.qDiffStepThresh = 3;
+ params->compressionParams.decimationThreshMod = 2;
+ /* End of default values from Software Developer's Guide */
+
+ /* Set Sensor FPS to 15fps. This seems better than 30fps
+ * for indoor lighting. */
+ params->sensorFps.divisor = 1;
+ params->sensorFps.baserate = 1;
+
+ params->yuvThreshold.yThreshold = 6; /* From windows driver */
+ params->yuvThreshold.uvThreshold = 6; /* From windows driver */
+
+ params->format.subSample = SUBSAMPLE_420;
+ params->format.yuvOrder = YUVORDER_YUYV;
+
+ params->compression.mode = CPIA_COMPRESSION_AUTO;
+ params->compression.decimation = NO_DECIMATION;
+
+ params->compressionTarget.frTargeting = COMP_TARGET_DEF;
+ params->compressionTarget.targetFR = 15; /* From windows driver */
+ params->compressionTarget.targetQ = 5; /* From windows driver */
+
+ params->qx3.qx3_detected = 0;
+ params->qx3.toplight = 0;
+ params->qx3.bottomlight = 0;
+ params->qx3.button = 0;
+ params->qx3.cradled = 0;
+}
+
+static void printstatus(struct cam_params *params)
+{
+ PDEBUG(D_PROBE, "status: %02x %02x %02x %02x %02x %02x %02x %02x",
+ params->status.systemState, params->status.grabState,
+ params->status.streamState, params->status.fatalError,
+ params->status.cmdError, params->status.debugFlags,
+ params->status.vpStatus, params->status.errorCode);
+}
+
+static int goto_low_power(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ int ret;
+
+ ret = do_command(gspca_dev, CPIA_COMMAND_GotoLoPower, 0, 0, 0, 0);
+ if (ret)
+ return ret;
+
+ do_command(gspca_dev, CPIA_COMMAND_GetCameraStatus, 0, 0, 0, 0);
+ if (ret)
+ return ret;
+
+ if (sd->params.status.systemState != LO_POWER_STATE) {
+ if (sd->params.status.systemState != WARM_BOOT_STATE) {
+ PDEBUG(D_ERR,
+ "unexpected state after lo power cmd: %02x",
+ sd->params.status.systemState);
+ printstatus(&sd->params);
+ }
+ return -EIO;
+ }
+
+ PDEBUG(D_CONF, "camera now in LOW power state");
+ return 0;
+}
+
+static int goto_high_power(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ int ret;
+
+ ret = do_command(gspca_dev, CPIA_COMMAND_GotoHiPower, 0, 0, 0, 0);
+ if (ret)
+ return ret;
+
+ msleep_interruptible(40); /* windows driver does it too */
+
+ if (signal_pending(current))
+ return -EINTR;
+
+ do_command(gspca_dev, CPIA_COMMAND_GetCameraStatus, 0, 0, 0, 0);
+ if (ret)
+ return ret;
+
+ if (sd->params.status.systemState != HI_POWER_STATE) {
+ PDEBUG(D_ERR, "unexpected state after hi power cmd: %02x",
+ sd->params.status.systemState);
+ printstatus(&sd->params);
+ return -EIO;
+ }
+
+ PDEBUG(D_CONF, "camera now in HIGH power state");
+ return 0;
+}
+
+static int get_version_information(struct gspca_dev *gspca_dev)
+{
+ int ret;
+
+ /* GetCPIAVersion */
+ ret = do_command(gspca_dev, CPIA_COMMAND_GetCPIAVersion, 0, 0, 0, 0);
+ if (ret)
+ return ret;
+
+ /* GetPnPID */
+ return do_command(gspca_dev, CPIA_COMMAND_GetPnPID, 0, 0, 0, 0);
+}
+
+static int save_camera_state(struct gspca_dev *gspca_dev)
+{
+ int ret;
+
+ ret = do_command(gspca_dev, CPIA_COMMAND_GetColourBalance, 0, 0, 0, 0);
+ if (ret)
+ return ret;
+
+ return do_command(gspca_dev, CPIA_COMMAND_GetExposure, 0, 0, 0, 0);
+}
+
+int command_setformat(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ int ret;
+
+ ret = do_command(gspca_dev, CPIA_COMMAND_SetFormat,
+ sd->params.format.videoSize,
+ sd->params.format.subSample,
+ sd->params.format.yuvOrder, 0);
+ if (ret)
+ return ret;
+
+ return do_command(gspca_dev, CPIA_COMMAND_SetROI,
+ sd->params.roi.colStart, sd->params.roi.colEnd,
+ sd->params.roi.rowStart, sd->params.roi.rowEnd);
+}
+
+int command_setcolourparams(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ return do_command(gspca_dev, CPIA_COMMAND_SetColourParams,
+ sd->params.colourParams.brightness,
+ sd->params.colourParams.contrast,
+ sd->params.colourParams.saturation, 0);
+}
+
+int command_setapcor(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ return do_command(gspca_dev, CPIA_COMMAND_SetApcor,
+ sd->params.apcor.gain1,
+ sd->params.apcor.gain2,
+ sd->params.apcor.gain4,
+ sd->params.apcor.gain8);
+}
+
+int command_setvloffset(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ return do_command(gspca_dev, CPIA_COMMAND_SetVLOffset,
+ sd->params.vlOffset.gain1,
+ sd->params.vlOffset.gain2,
+ sd->params.vlOffset.gain4,
+ sd->params.vlOffset.gain8);
+}
+
+int command_setexposure(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ int ret;
+
+ ret = do_command_extended(gspca_dev, CPIA_COMMAND_SetExposure,
+ sd->params.exposure.gainMode,
+ 1,
+ sd->params.exposure.compMode,
+ sd->params.exposure.centreWeight,
+ sd->params.exposure.gain,
+ sd->params.exposure.fineExp,
+ sd->params.exposure.coarseExpLo,
+ sd->params.exposure.coarseExpHi,
+ sd->params.exposure.redComp,
+ sd->params.exposure.green1Comp,
+ sd->params.exposure.green2Comp,
+ sd->params.exposure.blueComp);
+ if (ret)
+ return ret;
+
+ if (sd->params.exposure.expMode != 1) {
+ ret = do_command_extended(gspca_dev, CPIA_COMMAND_SetExposure,
+ 0,
+ sd->params.exposure.expMode,
+ 0, 0,
+ sd->params.exposure.gain,
+ sd->params.exposure.fineExp,
+ sd->params.exposure.coarseExpLo,
+ sd->params.exposure.coarseExpHi,
+ 0, 0, 0, 0);
+ }
+
+ return ret;
+}
+
+int command_setcolourbalance(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ if (sd->params.colourBalance.balanceMode == 1) {
+ int ret;
+
+ ret = do_command(gspca_dev, CPIA_COMMAND_SetColourBalance,
+ 1,
+ sd->params.colourBalance.redGain,
+ sd->params.colourBalance.greenGain,
+ sd->params.colourBalance.blueGain);
+ if (ret)
+ return ret;
+
+ return do_command(gspca_dev, CPIA_COMMAND_SetColourBalance,
+ 3, 0, 0, 0);
+ }
+ if (sd->params.colourBalance.balanceMode == 2) {
+ return do_command(gspca_dev, CPIA_COMMAND_SetColourBalance,
+ 2, 0, 0, 0);
+ }
+ if (sd->params.colourBalance.balanceMode == 3) {
+ return do_command(gspca_dev, CPIA_COMMAND_SetColourBalance,
+ 3, 0, 0, 0);
+ }
+
+ return -EINVAL;
+}
+
+int command_setcompressiontarget(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ return do_command(gspca_dev, CPIA_COMMAND_SetCompressionTarget,
+ sd->params.compressionTarget.frTargeting,
+ sd->params.compressionTarget.targetFR,
+ sd->params.compressionTarget.targetQ, 0);
+}
+
+int command_setyuvtresh(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ return do_command(gspca_dev, CPIA_COMMAND_SetYUVThresh,
+ sd->params.yuvThreshold.yThreshold,
+ sd->params.yuvThreshold.uvThreshold, 0, 0);
+}
+
+int command_setcompressionparams(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ return do_command_extended(gspca_dev,
+ CPIA_COMMAND_SetCompressionParams,
+ 0, 0, 0, 0,
+ sd->params.compressionParams.hysteresis,
+ sd->params.compressionParams.threshMax,
+ sd->params.compressionParams.smallStep,
+ sd->params.compressionParams.largeStep,
+ sd->params.compressionParams.decimationHysteresis,
+ sd->params.compressionParams.frDiffStepThresh,
+ sd->params.compressionParams.qDiffStepThresh,
+ sd->params.compressionParams.decimationThreshMod);
+}
+
+int command_setcompression(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ return do_command(gspca_dev, CPIA_COMMAND_SetCompression,
+ sd->params.compression.mode,
+ sd->params.compression.decimation, 0, 0);
+}
+
+int command_setsensorfps(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ return do_command(gspca_dev, CPIA_COMMAND_SetSensorFPS,
+ sd->params.sensorFps.divisor,
+ sd->params.sensorFps.baserate, 0, 0);
+}
+
+int command_setflickerctrl(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ return do_command(gspca_dev, CPIA_COMMAND_SetFlickerCtrl,
+ sd->params.flickerControl.flickerMode,
+ sd->params.flickerControl.coarseJump,
+ sd->params.flickerControl.allowableOverExposure,
+ 0);
+}
+
+int command_setecptiming(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ return do_command(gspca_dev, CPIA_COMMAND_SetECPTiming,
+ sd->params.ecpTiming, 0, 0, 0);
+}
+
+int command_pause(struct gspca_dev *gspca_dev)
+{
+ return do_command(gspca_dev, CPIA_COMMAND_EndStreamCap, 0, 0, 0, 0);
+}
+
+int command_resume(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ return do_command(gspca_dev, CPIA_COMMAND_InitStreamCap,
+ 0, sd->params.streamStartLine, 0, 0);
+}
+
+int command_setlights(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ int ret, p1, p2;
+
+ if (!sd->params.qx3.qx3_detected)
+ return 0;
+
+ p1 = (sd->params.qx3.bottomlight == 0) << 1;
+ p2 = (sd->params.qx3.toplight == 0) << 3;
+
+ ret = do_command(gspca_dev, CPIA_COMMAND_WriteVCReg,
+ 0x90, 0x8F, 0x50, 0);
+ if (ret)
+ return ret;
+
+ return do_command(gspca_dev, CPIA_COMMAND_WriteMCPort, 2, 0,
+ p1 | p2 | 0xE0, 0);
+}
+
+static int set_flicker(struct gspca_dev *gspca_dev, int on, int apply)
+{
+ /* Everything in here is from the Windows driver */
+/* define for compgain calculation */
+#if 0
+#define COMPGAIN(base, curexp, newexp) \
+ (u8) ((((float) base - 128.0) * ((float) curexp / (float) newexp)) + 128.5)
+#define EXP_FROM_COMP(basecomp, curcomp, curexp) \
+ (u16)((float)curexp * (float)(u8)(curcomp + 128) / \
+ (float)(u8)(basecomp - 128))
+#else
+ /* equivalent functions without floating point math */
+#define COMPGAIN(base, curexp, newexp) \
+ (u8)(128 + (((u32)(2*(base-128)*curexp + newexp)) / (2 * newexp)))
+#define EXP_FROM_COMP(basecomp, curcomp, curexp) \
+ (u16)(((u32)(curexp * (u8)(curcomp + 128)) / (u8)(basecomp - 128)))
+#endif
+
+ struct sd *sd = (struct sd *) gspca_dev;
+ int currentexp = sd->params.exposure.coarseExpLo +
+ sd->params.exposure.coarseExpHi * 256;
+ int ret, startexp;
+
+ if (on) {
+ int cj = sd->params.flickerControl.coarseJump;
+ sd->params.flickerControl.flickerMode = 1;
+ sd->params.flickerControl.disabled = 0;
+ if (sd->params.exposure.expMode != 2) {
+ sd->params.exposure.expMode = 2;
+ sd->exposure_status = EXPOSURE_NORMAL;
+ }
+ currentexp = currentexp << sd->params.exposure.gain;
+ sd->params.exposure.gain = 0;
+ /* round down current exposure to nearest value */
+ startexp = (currentexp + ROUND_UP_EXP_FOR_FLICKER) / cj;
+ if (startexp < 1)
+ startexp = 1;
+ startexp = (startexp * cj) - 1;
+ if (FIRMWARE_VERSION(1, 2))
+ while (startexp > MAX_EXP_102)
+ startexp -= cj;
+ else
+ while (startexp > MAX_EXP)
+ startexp -= cj;
+ sd->params.exposure.coarseExpLo = startexp & 0xff;
+ sd->params.exposure.coarseExpHi = startexp >> 8;
+ if (currentexp > startexp) {
+ if (currentexp > (2 * startexp))
+ currentexp = 2 * startexp;
+ sd->params.exposure.redComp =
+ COMPGAIN(COMP_RED, currentexp, startexp);
+ sd->params.exposure.green1Comp =
+ COMPGAIN(COMP_GREEN1, currentexp, startexp);
+ sd->params.exposure.green2Comp =
+ COMPGAIN(COMP_GREEN2, currentexp, startexp);
+ sd->params.exposure.blueComp =
+ COMPGAIN(COMP_BLUE, currentexp, startexp);
+ } else {
+ sd->params.exposure.redComp = COMP_RED;
+ sd->params.exposure.green1Comp = COMP_GREEN1;
+ sd->params.exposure.green2Comp = COMP_GREEN2;
+ sd->params.exposure.blueComp = COMP_BLUE;
+ }
+ if (FIRMWARE_VERSION(1, 2))
+ sd->params.exposure.compMode = 0;
+ else
+ sd->params.exposure.compMode = 1;
+
+ sd->params.apcor.gain1 = 0x18;
+ sd->params.apcor.gain2 = 0x18;
+ sd->params.apcor.gain4 = 0x16;
+ sd->params.apcor.gain8 = 0x14;
+ } else {
+ sd->params.flickerControl.flickerMode = 0;
+ sd->params.flickerControl.disabled = 1;
+ /* Average equivalent coarse for each comp channel */
+ startexp = EXP_FROM_COMP(COMP_RED,
+ sd->params.exposure.redComp, currentexp);
+ startexp += EXP_FROM_COMP(COMP_GREEN1,
+ sd->params.exposure.green1Comp, currentexp);
+ startexp += EXP_FROM_COMP(COMP_GREEN2,
+ sd->params.exposure.green2Comp, currentexp);
+ startexp += EXP_FROM_COMP(COMP_BLUE,
+ sd->params.exposure.blueComp, currentexp);
+ startexp = startexp >> 2;
+ while (startexp > MAX_EXP && sd->params.exposure.gain <
+ sd->params.exposure.gainMode - 1) {
+ startexp = startexp >> 1;
+ ++sd->params.exposure.gain;
+ }
+ if (FIRMWARE_VERSION(1, 2) && startexp > MAX_EXP_102)
+ startexp = MAX_EXP_102;
+ if (startexp > MAX_EXP)
+ startexp = MAX_EXP;
+ sd->params.exposure.coarseExpLo = startexp & 0xff;
+ sd->params.exposure.coarseExpHi = startexp >> 8;
+ sd->params.exposure.redComp = COMP_RED;
+ sd->params.exposure.green1Comp = COMP_GREEN1;
+ sd->params.exposure.green2Comp = COMP_GREEN2;
+ sd->params.exposure.blueComp = COMP_BLUE;
+ sd->params.exposure.compMode = 1;
+ sd->params.apcor.gain1 = 0x18;
+ sd->params.apcor.gain2 = 0x16;
+ sd->params.apcor.gain4 = 0x24;
+ sd->params.apcor.gain8 = 0x34;
+ }
+ sd->params.vlOffset.gain1 = 20;
+ sd->params.vlOffset.gain2 = 24;
+ sd->params.vlOffset.gain4 = 26;
+ sd->params.vlOffset.gain8 = 26;
+
+ if (apply) {
+ ret = command_setexposure(gspca_dev);
+ if (ret)
+ return ret;
+
+ ret = command_setapcor(gspca_dev);
+ if (ret)
+ return ret;
+
+ ret = command_setvloffset(gspca_dev);
+ if (ret)
+ return ret;
+
+ ret = command_setflickerctrl(gspca_dev);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+#undef EXP_FROM_COMP
+#undef COMPGAIN
+}
+
+/* monitor the exposure and adjust the sensor frame rate if needed */
+static void monitor_exposure(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ u8 exp_acc, bcomp, gain, coarseL, cmd[8];
+ int ret, light_exp, dark_exp, very_dark_exp;
+ int old_exposure, new_exposure, framerate;
+ int setfps = 0, setexp = 0, setflicker = 0;
+
+ /* get necessary stats and register settings from camera */
+ /* do_command can't handle this, so do it ourselves */
+ cmd[0] = CPIA_COMMAND_ReadVPRegs >> 8;
+ cmd[1] = CPIA_COMMAND_ReadVPRegs & 0xff;
+ cmd[2] = 30;
+ cmd[3] = 4;
+ cmd[4] = 9;
+ cmd[5] = 8;
+ cmd[6] = 8;
+ cmd[7] = 0;
+ ret = cpia_usb_transferCmd(gspca_dev, cmd);
+ if (ret) {
+ PDEBUG(D_ERR, "ReadVPRegs(30,4,9,8) - failed: %d", ret);
+ return;
+ }
+ exp_acc = gspca_dev->usb_buf[0];
+ bcomp = gspca_dev->usb_buf[1];
+ gain = gspca_dev->usb_buf[2];
+ coarseL = gspca_dev->usb_buf[3];
+
+ light_exp = sd->params.colourParams.brightness +
+ TC - 50 + EXP_ACC_LIGHT;
+ if (light_exp > 255)
+ light_exp = 255;
+ dark_exp = sd->params.colourParams.brightness +
+ TC - 50 - EXP_ACC_DARK;
+ if (dark_exp < 0)
+ dark_exp = 0;
+ very_dark_exp = dark_exp / 2;
+
+ old_exposure = sd->params.exposure.coarseExpHi * 256 +
+ sd->params.exposure.coarseExpLo;
+
+ if (!sd->params.flickerControl.disabled) {
+ /* Flicker control on */
+ int max_comp = FIRMWARE_VERSION(1, 2) ? MAX_COMP :
+ HIGH_COMP_102;
+ bcomp += 128; /* decode */
+ if (bcomp >= max_comp && exp_acc < dark_exp) {
+ /* dark */
+ if (exp_acc < very_dark_exp) {
+ /* very dark */
+ if (sd->exposure_status == EXPOSURE_VERY_DARK)
+ ++sd->exposure_count;
+ else {
+ sd->exposure_status =
+ EXPOSURE_VERY_DARK;
+ sd->exposure_count = 1;
+ }
+ } else {
+ /* just dark */
+ if (sd->exposure_status == EXPOSURE_DARK)
+ ++sd->exposure_count;
+ else {
+ sd->exposure_status = EXPOSURE_DARK;
+ sd->exposure_count = 1;
+ }
+ }
+ } else if (old_exposure <= LOW_EXP || exp_acc > light_exp) {
+ /* light */
+ if (old_exposure <= VERY_LOW_EXP) {
+ /* very light */
+ if (sd->exposure_status == EXPOSURE_VERY_LIGHT)
+ ++sd->exposure_count;
+ else {
+ sd->exposure_status =
+ EXPOSURE_VERY_LIGHT;
+ sd->exposure_count = 1;
+ }
+ } else {
+ /* just light */
+ if (sd->exposure_status == EXPOSURE_LIGHT)
+ ++sd->exposure_count;
+ else {
+ sd->exposure_status = EXPOSURE_LIGHT;
+ sd->exposure_count = 1;
+ }
+ }
+ } else {
+ /* not dark or light */
+ sd->exposure_status = EXPOSURE_NORMAL;
+ }
+ } else {
+ /* Flicker control off */
+ if (old_exposure >= MAX_EXP && exp_acc < dark_exp) {
+ /* dark */
+ if (exp_acc < very_dark_exp) {
+ /* very dark */
+ if (sd->exposure_status == EXPOSURE_VERY_DARK)
+ ++sd->exposure_count;
+ else {
+ sd->exposure_status =
+ EXPOSURE_VERY_DARK;
+ sd->exposure_count = 1;
+ }
+ } else {
+ /* just dark */
+ if (sd->exposure_status == EXPOSURE_DARK)
+ ++sd->exposure_count;
+ else {
+ sd->exposure_status = EXPOSURE_DARK;
+ sd->exposure_count = 1;
+ }
+ }
+ } else if (old_exposure <= LOW_EXP || exp_acc > light_exp) {
+ /* light */
+ if (old_exposure <= VERY_LOW_EXP) {
+ /* very light */
+ if (sd->exposure_status == EXPOSURE_VERY_LIGHT)
+ ++sd->exposure_count;
+ else {
+ sd->exposure_status =
+ EXPOSURE_VERY_LIGHT;
+ sd->exposure_count = 1;
+ }
+ } else {
+ /* just light */
+ if (sd->exposure_status == EXPOSURE_LIGHT)
+ ++sd->exposure_count;
+ else {
+ sd->exposure_status = EXPOSURE_LIGHT;
+ sd->exposure_count = 1;
+ }
+ }
+ } else {
+ /* not dark or light */
+ sd->exposure_status = EXPOSURE_NORMAL;
+ }
+ }
+
+ framerate = atomic_read(&sd->fps);
+ if (framerate > 30 || framerate < 1)
+ framerate = 1;
+
+ if (!sd->params.flickerControl.disabled) {
+ /* Flicker control on */
+ if ((sd->exposure_status == EXPOSURE_VERY_DARK ||
+ sd->exposure_status == EXPOSURE_DARK) &&
+ sd->exposure_count >= DARK_TIME * framerate &&
+ sd->params.sensorFps.divisor < 3) {
+
+ /* dark for too long */
+ ++sd->params.sensorFps.divisor;
+ setfps = 1;
+
+ sd->params.flickerControl.coarseJump =
+ flicker_jumps[sd->mainsFreq]
+ [sd->params.sensorFps.baserate]
+ [sd->params.sensorFps.divisor];
+ setflicker = 1;
+
+ new_exposure = sd->params.flickerControl.coarseJump-1;
+ while (new_exposure < old_exposure / 2)
+ new_exposure +=
+ sd->params.flickerControl.coarseJump;
+ sd->params.exposure.coarseExpLo = new_exposure & 0xff;
+ sd->params.exposure.coarseExpHi = new_exposure >> 8;
+ setexp = 1;
+ sd->exposure_status = EXPOSURE_NORMAL;
+ PDEBUG(D_CONF, "Automatically decreasing sensor_fps");
+
+ } else if ((sd->exposure_status == EXPOSURE_VERY_LIGHT ||
+ sd->exposure_status == EXPOSURE_LIGHT) &&
+ sd->exposure_count >= LIGHT_TIME * framerate &&
+ sd->params.sensorFps.divisor > 0) {
+
+ /* light for too long */
+ int max_exp = FIRMWARE_VERSION(1, 2) ? MAX_EXP_102 :
+ MAX_EXP;
+ --sd->params.sensorFps.divisor;
+ setfps = 1;
+
+ sd->params.flickerControl.coarseJump =
+ flicker_jumps[sd->mainsFreq]
+ [sd->params.sensorFps.baserate]
+ [sd->params.sensorFps.divisor];
+ setflicker = 1;
+
+ new_exposure = sd->params.flickerControl.coarseJump-1;
+ while (new_exposure < 2 * old_exposure &&
+ new_exposure +
+ sd->params.flickerControl.coarseJump < max_exp)
+ new_exposure +=
+ sd->params.flickerControl.coarseJump;
+ sd->params.exposure.coarseExpLo = new_exposure & 0xff;
+ sd->params.exposure.coarseExpHi = new_exposure >> 8;
+ setexp = 1;
+ sd->exposure_status = EXPOSURE_NORMAL;
+ PDEBUG(D_CONF, "Automatically increasing sensor_fps");
+ }
+ } else {
+ /* Flicker control off */
+ if ((sd->exposure_status == EXPOSURE_VERY_DARK ||
+ sd->exposure_status == EXPOSURE_DARK) &&
+ sd->exposure_count >= DARK_TIME * framerate &&
+ sd->params.sensorFps.divisor < 3) {
+
+ /* dark for too long */
+ ++sd->params.sensorFps.divisor;
+ setfps = 1;
+
+ if (sd->params.exposure.gain > 0) {
+ --sd->params.exposure.gain;
+ setexp = 1;
+ }
+ sd->exposure_status = EXPOSURE_NORMAL;
+ PDEBUG(D_CONF, "Automatically decreasing sensor_fps");
+
+ } else if ((sd->exposure_status == EXPOSURE_VERY_LIGHT ||
+ sd->exposure_status == EXPOSURE_LIGHT) &&
+ sd->exposure_count >= LIGHT_TIME * framerate &&
+ sd->params.sensorFps.divisor > 0) {
+
+ /* light for too long */
+ --sd->params.sensorFps.divisor;
+ setfps = 1;
+
+ if (sd->params.exposure.gain <
+ sd->params.exposure.gainMode - 1) {
+ ++sd->params.exposure.gain;
+ setexp = 1;
+ }
+ sd->exposure_status = EXPOSURE_NORMAL;
+ PDEBUG(D_CONF, "Automatically increasing sensor_fps");
+ }
+ }
+
+ if (setexp)
+ command_setexposure(gspca_dev);
+
+ if (setfps)
+ command_setsensorfps(gspca_dev);
+
+ if (setflicker)
+ command_setflickerctrl(gspca_dev);
+}
+
+/*-----------------------------------------------------------------*/
+/* if flicker is switched off, this function switches it back on.It checks,
+ however, that conditions are suitable before restarting it.
+ This should only be called for firmware version 1.2.
+
+ It also adjust the colour balance when an exposure step is detected - as
+ long as flicker is running
+*/
+static void restart_flicker(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ int cam_exposure, old_exp;
+
+ if (!FIRMWARE_VERSION(1, 2))
+ return;
+
+ cam_exposure = atomic_read(&sd->cam_exposure);
+
+ if (sd->params.flickerControl.flickerMode == 0 ||
+ cam_exposure == 0)
+ return;
+
+ old_exp = sd->params.exposure.coarseExpLo +
+ sd->params.exposure.coarseExpHi*256;
+ /*
+ see how far away camera exposure is from a valid
+ flicker exposure value
+ */
+ cam_exposure %= sd->params.flickerControl.coarseJump;
+ if (!sd->params.flickerControl.disabled &&
+ cam_exposure <= sd->params.flickerControl.coarseJump - 3) {
+ /* Flicker control auto-disabled */
+ sd->params.flickerControl.disabled = 1;
+ }
+
+ if (sd->params.flickerControl.disabled &&
+ old_exp > sd->params.flickerControl.coarseJump +
+ ROUND_UP_EXP_FOR_FLICKER) {
+ /* exposure is now high enough to switch
+ flicker control back on */
+ set_flicker(gspca_dev, 1, 1);
+ }
+}
+
+/* this function is called at probe time */
+static int sd_config(struct gspca_dev *gspca_dev,
+ const struct usb_device_id *id)
+{
+ struct cam *cam;
+
+ reset_camera_params(gspca_dev);
+
+ PDEBUG(D_PROBE, "cpia CPiA camera detected (vid/pid 0x%04X:0x%04X)",
+ id->idVendor, id->idProduct);
+
+ cam = &gspca_dev->cam;
+ cam->cam_mode = mode;
+ cam->nmodes = ARRAY_SIZE(mode);
+
+ sd_setfreq(gspca_dev, FREQ_DEF);
+
+ return 0;
+}
+
+/* -- start the camera -- */
+static int sd_start(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ int priv, ret;
+
+ /* Start the camera in low power mode */
+ if (goto_low_power(gspca_dev)) {
+ if (sd->params.status.systemState != WARM_BOOT_STATE) {
+ PDEBUG(D_ERR, "unexpected systemstate: %02x",
+ sd->params.status.systemState);
+ printstatus(&sd->params);
+ return -ENODEV;
+ }
+
+ /* FIXME: this is just dirty trial and error */
+ ret = goto_high_power(gspca_dev);
+ if (ret)
+ return ret;
+
+ ret = do_command(gspca_dev, CPIA_COMMAND_DiscardFrame,
+ 0, 0, 0, 0);
+ if (ret)
+ return ret;
+
+ ret = goto_low_power(gspca_dev);
+ if (ret)
+ return ret;
+ }
+
+ /* procedure described in developer's guide p3-28 */
+
+ /* Check the firmware version. */
+ sd->params.version.firmwareVersion = 0;
+ get_version_information(gspca_dev);
+ if (sd->params.version.firmwareVersion != 1) {
+ PDEBUG(D_ERR, "only firmware version 1 is supported (got: %d)",
+ sd->params.version.firmwareVersion);
+ return -ENODEV;
+ }
+
+ /* A bug in firmware 1-02 limits gainMode to 2 */
+ if (sd->params.version.firmwareRevision <= 2 &&
+ sd->params.exposure.gainMode > 2) {
+ sd->params.exposure.gainMode = 2;
+ }
+
+ /* set QX3 detected flag */
+ sd->params.qx3.qx3_detected = (sd->params.pnpID.vendor == 0x0813 &&
+ sd->params.pnpID.product == 0x0001);
+
+ /* The fatal error checking should be done after
+ * the camera powers up (developer's guide p 3-38) */
+
+ /* Set streamState before transition to high power to avoid bug
+ * in firmware 1-02 */
+ ret = do_command(gspca_dev, CPIA_COMMAND_ModifyCameraStatus,
+ STREAMSTATE, 0, STREAM_NOT_READY, 0);
+ if (ret)
+ return ret;
+
+ /* GotoHiPower */
+ ret = goto_high_power(gspca_dev);
+ if (ret)
+ return ret;
+
+ /* Check the camera status */
+ ret = do_command(gspca_dev, CPIA_COMMAND_GetCameraStatus, 0, 0, 0, 0);
+ if (ret)
+ return ret;
+
+ if (sd->params.status.fatalError) {
+ PDEBUG(D_ERR, "fatal_error: %04x, vp_status: %04x",
+ sd->params.status.fatalError,
+ sd->params.status.vpStatus);
+ return -EIO;
+ }
+
+ /* VPVersion can't be retrieved before the camera is in HiPower,
+ * so get it here instead of in get_version_information. */
+ ret = do_command(gspca_dev, CPIA_COMMAND_GetVPVersion, 0, 0, 0, 0);
+ if (ret)
+ return ret;
+
+ /* Determine video mode settings */
+ sd->params.streamStartLine = 120;
+
+ priv = gspca_dev->cam.cam_mode[gspca_dev->curr_mode].priv;
+ if (priv & 0x01) { /* crop */
+ sd->params.roi.colStart = 2;
+ sd->params.roi.rowStart = 6;
+ } else {
+ sd->params.roi.colStart = 0;
+ sd->params.roi.rowStart = 0;
+ }
+
+ if (priv & 0x02) { /* quarter */
+ sd->params.format.videoSize = VIDEOSIZE_QCIF;
+ sd->params.roi.colStart /= 2;
+ sd->params.roi.rowStart /= 2;
+ sd->params.streamStartLine /= 2;
+ } else
+ sd->params.format.videoSize = VIDEOSIZE_CIF;
+
+ sd->params.roi.colEnd = sd->params.roi.colStart +
+ (gspca_dev->width >> 3);
+ sd->params.roi.rowEnd = sd->params.roi.rowStart +
+ (gspca_dev->height >> 2);
+
+ /* And now set the camera to a known state */
+ ret = do_command(gspca_dev, CPIA_COMMAND_SetGrabMode,
+ CPIA_GRAB_CONTINEOUS, 0, 0, 0);
+ if (ret)
+ return ret;
+ /* We start with compression disabled, as we need one uncompressed
+ frame to handle later compressed frames */
+ ret = do_command(gspca_dev, CPIA_COMMAND_SetCompression,
+ CPIA_COMPRESSION_NONE,
+ NO_DECIMATION, 0, 0);
+ if (ret)
+ return ret;
+ ret = command_setcompressiontarget(gspca_dev);
+ if (ret)
+ return ret;
+ ret = command_setcolourparams(gspca_dev);
+ if (ret)
+ return ret;
+ ret = command_setformat(gspca_dev);
+ if (ret)
+ return ret;
+ ret = command_setyuvtresh(gspca_dev);
+ if (ret)
+ return ret;
+ ret = command_setecptiming(gspca_dev);
+ if (ret)
+ return ret;
+ ret = command_setcompressionparams(gspca_dev);
+ if (ret)
+ return ret;
+ ret = command_setexposure(gspca_dev);
+ if (ret)
+ return ret;
+ ret = command_setcolourbalance(gspca_dev);
+ if (ret)
+ return ret;
+ ret = command_setsensorfps(gspca_dev);
+ if (ret)
+ return ret;
+ ret = command_setapcor(gspca_dev);
+ if (ret)
+ return ret;
+ ret = command_setflickerctrl(gspca_dev);
+ if (ret)
+ return ret;
+ ret = command_setvloffset(gspca_dev);
+ if (ret)
+ return ret;
+
+ /* Start stream */
+ ret = command_resume(gspca_dev);
+ if (ret)
+ return ret;
+
+ /* Wait 6 frames before turning compression on for the sensor to get
+ all settings and AEC/ACB to settle */
+ sd->first_frame = 6;
+ sd->exposure_status = EXPOSURE_NORMAL;
+ sd->exposure_count = 0;
+ atomic_set(&sd->cam_exposure, 0);
+ atomic_set(&sd->fps, 0);
+
+ return 0;
+}
+
+static void sd_stopN(struct gspca_dev *gspca_dev)
+{
+ command_pause(gspca_dev);
+
+ /* save camera state for later open (developers guide ch 3.5.3) */
+ save_camera_state(gspca_dev);
+
+ /* GotoLoPower */
+ goto_low_power(gspca_dev);
+
+ /* Update the camera status */
+ do_command(gspca_dev, CPIA_COMMAND_GetCameraStatus, 0, 0, 0, 0);
+}
+
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ int ret;
+
+ /* Start / Stop the camera to make sure we are talking to
+ a supported camera, and to get some information from it
+ to print. */
+ ret = sd_start(gspca_dev);
+ if (ret)
+ return ret;
+
+ sd_stopN(gspca_dev);
+
+ PDEBUG(D_PROBE, "CPIA Version: %d.%02d (%d.%d)",
+ sd->params.version.firmwareVersion,
+ sd->params.version.firmwareRevision,
+ sd->params.version.vcVersion,
+ sd->params.version.vcRevision);
+ PDEBUG(D_PROBE, "CPIA PnP-ID: %04x:%04x:%04x",
+ sd->params.pnpID.vendor, sd->params.pnpID.product,
+ sd->params.pnpID.deviceRevision);
+ PDEBUG(D_PROBE, "VP-Version: %d.%d %04x",
+ sd->params.vpVersion.vpVersion,
+ sd->params.vpVersion.vpRevision,
+ sd->params.vpVersion.cameraHeadID);
+
+ return 0;
+}
+
+static void sd_pkt_scan(struct gspca_dev *gspca_dev,
+ u8 *data,
+ int len)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ /* Check for SOF */
+ if (len >= 64 &&
+ data[0] == MAGIC_0 && data[1] == MAGIC_1 &&
+ data[16] == sd->params.format.videoSize &&
+ data[17] == sd->params.format.subSample &&
+ data[18] == sd->params.format.yuvOrder &&
+ data[24] == sd->params.roi.colStart &&
+ data[25] == sd->params.roi.colEnd &&
+ data[26] == sd->params.roi.rowStart &&
+ data[27] == sd->params.roi.rowEnd) {
+ struct gspca_frame *frame = gspca_get_i_frame(gspca_dev);
+
+ atomic_set(&sd->cam_exposure, data[39] * 2);
+ atomic_set(&sd->fps, data[41]);
+
+ if (frame == NULL) {
+ gspca_dev->last_packet_type = DISCARD_PACKET;
+ return;
+ }
+
+ /* Check for proper EOF for last frame */
+ if ((frame->data_end - frame->data) > 4 &&
+ frame->data_end[-4] == 0xff &&
+ frame->data_end[-3] == 0xff &&
+ frame->data_end[-2] == 0xff &&
+ frame->data_end[-1] == 0xff)
+ gspca_frame_add(gspca_dev, LAST_PACKET,
+ NULL, 0);
+
+ gspca_frame_add(gspca_dev, FIRST_PACKET, data, len);
+ return;
+ }
+
+ gspca_frame_add(gspca_dev, INTER_PACKET, data, len);
+}
+
+static void sd_dq_callback(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ /* Set the normal compression settings once we have captured a
+ few uncompressed frames (and AEC has hopefully settled) */
+ if (sd->first_frame) {
+ sd->first_frame--;
+ if (sd->first_frame == 0)
+ command_setcompression(gspca_dev);
+ }
+
+ /* Switch flicker control back on if it got turned off */
+ restart_flicker(gspca_dev);
+
+ /* If AEC is enabled, monitor the exposure and
+ adjust the sensor frame rate if needed */
+ if (sd->params.exposure.expMode == 2)
+ monitor_exposure(gspca_dev);
+
+ /* Update our knowledge of the camera state */
+ do_command(gspca_dev, CPIA_COMMAND_GetExposure, 0, 0, 0, 0);
+ if (sd->params.qx3.qx3_detected)
+ do_command(gspca_dev, CPIA_COMMAND_ReadMCPorts, 0, 0, 0, 0);
+}
+
+static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ int ret;
+
+ sd->params.colourParams.brightness = val;
+ sd->params.flickerControl.allowableOverExposure =
+ find_over_exposure(sd->params.colourParams.brightness);
+ if (gspca_dev->streaming) {
+ ret = command_setcolourparams(gspca_dev);
+ if (ret)
+ return ret;
+ return command_setflickerctrl(gspca_dev);
+ }
+ return 0;
+}
+
+static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ *val = sd->params.colourParams.brightness;
+ return 0;
+}
+
+static int sd_setcontrast(struct gspca_dev *gspca_dev, __s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->params.colourParams.contrast = val;
+ if (gspca_dev->streaming)
+ return command_setcolourparams(gspca_dev);
+
+ return 0;
+}
+
+static int sd_getcontrast(struct gspca_dev *gspca_dev, __s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ *val = sd->params.colourParams.contrast;
+ return 0;
+}
+
+static int sd_setsaturation(struct gspca_dev *gspca_dev, __s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->params.colourParams.saturation = val;
+ if (gspca_dev->streaming)
+ return command_setcolourparams(gspca_dev);
+
+ return 0;
+}
+
+static int sd_getsaturation(struct gspca_dev *gspca_dev, __s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ *val = sd->params.colourParams.saturation;
+ return 0;
+}
+
+static int sd_setfreq(struct gspca_dev *gspca_dev, __s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ int on;
+
+ switch (val) {
+ case 0: /* V4L2_CID_POWER_LINE_FREQUENCY_DISABLED */
+ on = 0;
+ break;
+ case 1: /* V4L2_CID_POWER_LINE_FREQUENCY_50HZ */
+ on = 1;
+ sd->mainsFreq = 0;
+ break;
+ case 2: /* V4L2_CID_POWER_LINE_FREQUENCY_60HZ */
+ on = 1;
+ sd->mainsFreq = 1;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ sd->freq = val;
+ sd->params.flickerControl.coarseJump =
+ flicker_jumps[sd->mainsFreq]
+ [sd->params.sensorFps.baserate]
+ [sd->params.sensorFps.divisor];
+
+ return set_flicker(gspca_dev, on, gspca_dev->streaming);
+}
+
+static int sd_getfreq(struct gspca_dev *gspca_dev, __s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ *val = sd->freq;
+ return 0;
+}
+
+static int sd_setcomptarget(struct gspca_dev *gspca_dev, __s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->params.compressionTarget.frTargeting = val;
+ if (gspca_dev->streaming)
+ return command_setcompressiontarget(gspca_dev);
+
+ return 0;
+}
+
+static int sd_getcomptarget(struct gspca_dev *gspca_dev, __s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ *val = sd->params.compressionTarget.frTargeting;
+ return 0;
+}
+
+static int sd_querymenu(struct gspca_dev *gspca_dev,
+ struct v4l2_querymenu *menu)
+{
+ switch (menu->id) {
+ case V4L2_CID_POWER_LINE_FREQUENCY:
+ switch (menu->index) {
+ case 0: /* V4L2_CID_POWER_LINE_FREQUENCY_DISABLED */
+ strcpy((char *) menu->name, "NoFliker");
+ return 0;
+ case 1: /* V4L2_CID_POWER_LINE_FREQUENCY_50HZ */
+ strcpy((char *) menu->name, "50 Hz");
+ return 0;
+ case 2: /* V4L2_CID_POWER_LINE_FREQUENCY_60HZ */
+ strcpy((char *) menu->name, "60 Hz");
+ return 0;
+ }
+ break;
+ case V4L2_CID_COMP_TARGET:
+ switch (menu->index) {
+ case CPIA_COMPRESSION_TARGET_QUALITY:
+ strcpy((char *) menu->name, "Quality");
+ return 0;
+ case CPIA_COMPRESSION_TARGET_FRAMERATE:
+ strcpy((char *) menu->name, "Framerate");
+ return 0;
+ }
+ break;
+ }
+ return -EINVAL;
+}
+
+/* sub-driver description */
+static const struct sd_desc sd_desc = {
+ .name = MODULE_NAME,
+ .ctrls = sd_ctrls,
+ .nctrls = ARRAY_SIZE(sd_ctrls),
+ .config = sd_config,
+ .init = sd_init,
+ .start = sd_start,
+ .stopN = sd_stopN,
+ .dq_callback = sd_dq_callback,
+ .pkt_scan = sd_pkt_scan,
+ .querymenu = sd_querymenu,
+};
+
+/* -- module initialisation -- */
+static const __devinitdata struct usb_device_id device_table[] = {
+ {USB_DEVICE(0x0553, 0x0002)},
+ {USB_DEVICE(0x0813, 0x0001)},
+ {}
+};
+MODULE_DEVICE_TABLE(usb, device_table);
+
+/* -- device connect -- */
+static int sd_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ return gspca_dev_probe(intf, id, &sd_desc, sizeof(struct sd),
+ THIS_MODULE);
+}
+
+static struct usb_driver sd_driver = {
+ .name = MODULE_NAME,
+ .id_table = device_table,
+ .probe = sd_probe,
+ .disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+ .suspend = gspca_suspend,
+ .resume = gspca_resume,
+#endif
+};
+
+/* -- module insert / remove -- */
+static int __init sd_mod_init(void)
+{
+ int ret;
+ ret = usb_register(&sd_driver);
+ if (ret < 0)
+ return ret;
+ PDEBUG(D_PROBE, "registered");
+ return 0;
+}
+static void __exit sd_mod_exit(void)
+{
+ usb_deregister(&sd_driver);
+ PDEBUG(D_PROBE, "deregistered");
+}
+
+module_init(sd_mod_init);
+module_exit(sd_mod_exit);
diff --git a/drivers/media/video/gspca/etoms.c b/drivers/media/video/gspca/etoms.c
index fdf4c0ec..ecd4d74 100644
--- a/drivers/media/video/gspca/etoms.c
+++ b/drivers/media/video/gspca/etoms.c
@@ -52,7 +52,7 @@
static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val);
static int sd_getautogain(struct gspca_dev *gspca_dev, __s32 *val);
-static struct ctrl sd_ctrls[] = {
+static const struct ctrl sd_ctrls[] = {
{
{
.id = V4L2_CID_BRIGHTNESS,
@@ -851,7 +851,7 @@
}
/* sub-driver description */
-static struct sd_desc sd_desc = {
+static const struct sd_desc sd_desc = {
.name = MODULE_NAME,
.ctrls = sd_ctrls,
.nctrls = ARRAY_SIZE(sd_ctrls),
diff --git a/drivers/media/video/gspca/gl860/gl860.c b/drivers/media/video/gspca/gl860/gl860.c
index 4878c8f..9e42476 100644
--- a/drivers/media/video/gspca/gl860/gl860.c
+++ b/drivers/media/video/gspca/gl860/gl860.c
@@ -161,7 +161,7 @@
/*==================== sud-driver structure initialisation =================*/
-static struct sd_desc sd_desc_mi1320 = {
+static const struct sd_desc sd_desc_mi1320 = {
.name = MODULE_NAME,
.ctrls = sd_ctrls_mi1320,
.nctrls = GL860_NCTRLS,
@@ -174,7 +174,7 @@
.dq_callback = sd_callback,
};
-static struct sd_desc sd_desc_mi2020 = {
+static const struct sd_desc sd_desc_mi2020 = {
.name = MODULE_NAME,
.ctrls = sd_ctrls_mi2020,
.nctrls = GL860_NCTRLS,
@@ -187,7 +187,7 @@
.dq_callback = sd_callback,
};
-static struct sd_desc sd_desc_mi2020b = {
+static const struct sd_desc sd_desc_mi2020b = {
.name = MODULE_NAME,
.ctrls = sd_ctrls_mi2020b,
.nctrls = GL860_NCTRLS,
@@ -200,7 +200,7 @@
.dq_callback = sd_callback,
};
-static struct sd_desc sd_desc_ov2640 = {
+static const struct sd_desc sd_desc_ov2640 = {
.name = MODULE_NAME,
.ctrls = sd_ctrls_ov2640,
.nctrls = GL860_NCTRLS,
@@ -213,7 +213,7 @@
.dq_callback = sd_callback,
};
-static struct sd_desc sd_desc_ov9655 = {
+static const struct sd_desc sd_desc_ov9655 = {
.name = MODULE_NAME,
.ctrls = sd_ctrls_ov9655,
.nctrls = GL860_NCTRLS,
diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c
index bd6214d..222af47 100644
--- a/drivers/media/video/gspca/gspca.c
+++ b/drivers/media/video/gspca/gspca.c
@@ -3,6 +3,9 @@
*
* Copyright (C) 2008-2009 Jean-Francois Moine (http://moinejf.free.fr)
*
+ * Camera button input handling by Márton Németh
+ * Copyright (C) 2009-2010 Márton Németh <nm127@freemail.hu>
+ *
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
@@ -37,6 +40,11 @@
#include "gspca.h"
+#ifdef CONFIG_INPUT
+#include <linux/input.h>
+#include <linux/usb/input.h>
+#endif
+
/* global values */
#define DEF_NURBS 3 /* default number of URBs */
#if DEF_NURBS > MAX_NURBS
@@ -47,7 +55,7 @@
MODULE_DESCRIPTION("GSPCA USB Camera Driver");
MODULE_LICENSE("GPL");
-#define DRIVER_VERSION_NUMBER KERNEL_VERSION(2, 8, 0)
+#define DRIVER_VERSION_NUMBER KERNEL_VERSION(2, 9, 0)
#ifdef GSPCA_DEBUG
int gspca_debug = D_ERR | D_PROBE;
@@ -104,15 +112,185 @@
.close = gspca_vm_close,
};
+/*
+ * Input and interrupt endpoint handling functions
+ */
+#ifdef CONFIG_INPUT
+static void int_irq(struct urb *urb)
+{
+ struct gspca_dev *gspca_dev = (struct gspca_dev *) urb->context;
+ int ret;
+
+ ret = urb->status;
+ switch (ret) {
+ case 0:
+ if (gspca_dev->sd_desc->int_pkt_scan(gspca_dev,
+ urb->transfer_buffer, urb->actual_length) < 0) {
+ PDEBUG(D_ERR, "Unknown packet received");
+ }
+ break;
+
+ case -ENOENT:
+ case -ECONNRESET:
+ case -ENODEV:
+ case -ESHUTDOWN:
+ /* Stop is requested either by software or hardware is gone,
+ * keep the ret value non-zero and don't resubmit later.
+ */
+ break;
+
+ default:
+ PDEBUG(D_ERR, "URB error %i, resubmitting", urb->status);
+ urb->status = 0;
+ ret = 0;
+ }
+
+ if (ret == 0) {
+ ret = usb_submit_urb(urb, GFP_ATOMIC);
+ if (ret < 0)
+ PDEBUG(D_ERR, "Resubmit URB failed with error %i", ret);
+ }
+}
+
+static int gspca_input_connect(struct gspca_dev *dev)
+{
+ struct input_dev *input_dev;
+ int err = 0;
+
+ dev->input_dev = NULL;
+ if (dev->sd_desc->int_pkt_scan || dev->sd_desc->other_input) {
+ input_dev = input_allocate_device();
+ if (!input_dev)
+ return -ENOMEM;
+
+ usb_make_path(dev->dev, dev->phys, sizeof(dev->phys));
+ strlcat(dev->phys, "/input0", sizeof(dev->phys));
+
+ input_dev->name = dev->sd_desc->name;
+ input_dev->phys = dev->phys;
+
+ usb_to_input_id(dev->dev, &input_dev->id);
+
+ input_dev->evbit[0] = BIT_MASK(EV_KEY);
+ input_dev->keybit[BIT_WORD(KEY_CAMERA)] = BIT_MASK(KEY_CAMERA);
+ input_dev->dev.parent = &dev->dev->dev;
+
+ err = input_register_device(input_dev);
+ if (err) {
+ PDEBUG(D_ERR, "Input device registration failed "
+ "with error %i", err);
+ input_dev->dev.parent = NULL;
+ input_free_device(input_dev);
+ } else {
+ dev->input_dev = input_dev;
+ }
+ }
+
+ return err;
+}
+
+static int alloc_and_submit_int_urb(struct gspca_dev *gspca_dev,
+ struct usb_endpoint_descriptor *ep)
+{
+ unsigned int buffer_len;
+ int interval;
+ struct urb *urb;
+ struct usb_device *dev;
+ void *buffer = NULL;
+ int ret = -EINVAL;
+
+ buffer_len = ep->wMaxPacketSize;
+ interval = ep->bInterval;
+ PDEBUG(D_PROBE, "found int in endpoint: 0x%x, "
+ "buffer_len=%u, interval=%u",
+ ep->bEndpointAddress, buffer_len, interval);
+
+ dev = gspca_dev->dev;
+
+ urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!urb) {
+ ret = -ENOMEM;
+ goto error;
+ }
+
+ buffer = usb_buffer_alloc(dev, ep->wMaxPacketSize,
+ GFP_KERNEL, &urb->transfer_dma);
+ if (!buffer) {
+ ret = -ENOMEM;
+ goto error_buffer;
+ }
+ usb_fill_int_urb(urb, dev,
+ usb_rcvintpipe(dev, ep->bEndpointAddress),
+ buffer, buffer_len,
+ int_irq, (void *)gspca_dev, interval);
+ gspca_dev->int_urb = urb;
+ ret = usb_submit_urb(urb, GFP_KERNEL);
+ if (ret < 0) {
+ PDEBUG(D_ERR, "submit URB failed with error %i", ret);
+ goto error_submit;
+ }
+ return ret;
+
+error_submit:
+ usb_buffer_free(dev,
+ urb->transfer_buffer_length,
+ urb->transfer_buffer,
+ urb->transfer_dma);
+error_buffer:
+ usb_free_urb(urb);
+error:
+ return ret;
+}
+
+static void gspca_input_create_urb(struct gspca_dev *gspca_dev)
+{
+ struct usb_interface *intf;
+ struct usb_host_interface *intf_desc;
+ struct usb_endpoint_descriptor *ep;
+ int i;
+
+ if (gspca_dev->sd_desc->int_pkt_scan) {
+ intf = usb_ifnum_to_if(gspca_dev->dev, gspca_dev->iface);
+ intf_desc = intf->cur_altsetting;
+ for (i = 0; i < intf_desc->desc.bNumEndpoints; i++) {
+ ep = &intf_desc->endpoint[i].desc;
+ if (usb_endpoint_dir_in(ep) &&
+ usb_endpoint_xfer_int(ep)) {
+
+ alloc_and_submit_int_urb(gspca_dev, ep);
+ break;
+ }
+ }
+ }
+}
+
+static void gspca_input_destroy_urb(struct gspca_dev *gspca_dev)
+{
+ struct urb *urb;
+
+ urb = gspca_dev->int_urb;
+ if (urb) {
+ gspca_dev->int_urb = NULL;
+ usb_kill_urb(urb);
+ usb_buffer_free(gspca_dev->dev,
+ urb->transfer_buffer_length,
+ urb->transfer_buffer,
+ urb->transfer_dma);
+ usb_free_urb(urb);
+ }
+}
+#else
+#define gspca_input_connect(gspca_dev) 0
+#define gspca_input_create_urb(gspca_dev)
+#define gspca_input_destroy_urb(gspca_dev)
+#endif
+
/* get the current input frame buffer */
struct gspca_frame *gspca_get_i_frame(struct gspca_dev *gspca_dev)
{
struct gspca_frame *frame;
- int i;
- i = gspca_dev->fr_i;
- i = gspca_dev->fr_queue[i];
- frame = &gspca_dev->frame[i];
+ frame = gspca_dev->cur_frame;
if ((frame->v4l2_buf.flags & BUF_ALL_FLAGS)
!= V4L2_BUF_FLAG_QUEUED)
return NULL;
@@ -486,11 +664,13 @@
i, ep->desc.bEndpointAddress);
gspca_dev->alt = i; /* memorize the current alt setting */
if (gspca_dev->nbalt > 1) {
+ gspca_input_destroy_urb(gspca_dev);
ret = usb_set_interface(gspca_dev->dev, gspca_dev->iface, i);
if (ret < 0) {
err("set alt %d err %d", i, ret);
- return NULL;
+ ep = NULL;
}
+ gspca_input_create_urb(gspca_dev);
}
return ep;
}
@@ -534,26 +714,22 @@
nurbs = 1;
}
- gspca_dev->nurbs = nurbs;
for (n = 0; n < nurbs; n++) {
urb = usb_alloc_urb(npkt, GFP_KERNEL);
if (!urb) {
err("usb_alloc_urb failed");
- destroy_urbs(gspca_dev);
return -ENOMEM;
}
+ gspca_dev->urb[n] = urb;
urb->transfer_buffer = usb_buffer_alloc(gspca_dev->dev,
bsize,
GFP_KERNEL,
&urb->transfer_dma);
if (urb->transfer_buffer == NULL) {
- usb_free_urb(urb);
- err("usb_buffer_urb failed");
- destroy_urbs(gspca_dev);
+ err("usb_buffer_alloc failed");
return -ENOMEM;
}
- gspca_dev->urb[n] = urb;
urb->dev = gspca_dev->dev;
urb->context = gspca_dev;
urb->transfer_buffer_length = bsize;
@@ -585,6 +761,7 @@
static int gspca_init_transfer(struct gspca_dev *gspca_dev)
{
struct usb_host_endpoint *ep;
+ struct urb *urb;
int n, ret;
if (mutex_lock_interruptible(&gspca_dev->usb_lock))
@@ -595,6 +772,8 @@
goto out;
}
+ gspca_dev->usb_err = 0;
+
/* set the higher alternate setting and
* loop until urb submit succeeds */
if (gspca_dev->cam.reverse_alts)
@@ -613,10 +792,15 @@
goto out;
}
for (;;) {
- PDEBUG(D_STREAM, "init transfer alt %d", gspca_dev->alt);
- ret = create_urbs(gspca_dev, ep);
- if (ret < 0)
- goto out;
+ if (!gspca_dev->cam.no_urb_create) {
+ PDEBUG(D_STREAM, "init transfer alt %d",
+ gspca_dev->alt);
+ ret = create_urbs(gspca_dev, ep);
+ if (ret < 0) {
+ destroy_urbs(gspca_dev);
+ goto out;
+ }
+ }
/* clear the bulk endpoint */
if (gspca_dev->cam.bulk)
@@ -636,8 +820,11 @@
break;
/* submit the URBs */
- for (n = 0; n < gspca_dev->nurbs; n++) {
- ret = usb_submit_urb(gspca_dev->urb[n], GFP_KERNEL);
+ for (n = 0; n < MAX_NURBS; n++) {
+ urb = gspca_dev->urb[n];
+ if (urb == NULL)
+ break;
+ ret = usb_submit_urb(urb, GFP_KERNEL);
if (ret < 0)
break;
}
@@ -694,7 +881,9 @@
if (gspca_dev->sd_desc->stopN)
gspca_dev->sd_desc->stopN(gspca_dev);
destroy_urbs(gspca_dev);
+ gspca_input_destroy_urb(gspca_dev);
gspca_set_alt0(gspca_dev);
+ gspca_input_create_urb(gspca_dev);
}
/* always call stop0 to free the subdriver's resources */
@@ -2060,11 +2249,12 @@
PDEBUG(D_ERR, "Too many config");
return -ENODEV;
}
+
+ /* the USB video interface must be the first one */
interface = &intf->cur_altsetting->desc;
- if (interface->bInterfaceNumber > 0) {
- PDEBUG(D_ERR, "intf != 0");
+ if (dev->config->desc.bNumInterfaces != 1 &&
+ interface->bInterfaceNumber != 0)
return -ENODEV;
- }
/* create the device */
if (dev_size < sizeof *gspca_dev)
@@ -2096,6 +2286,10 @@
goto out;
gspca_set_default_mode(gspca_dev);
+ ret = gspca_input_connect(gspca_dev);
+ if (ret)
+ goto out;
+
mutex_init(&gspca_dev->usb_lock);
mutex_init(&gspca_dev->read_lock);
mutex_init(&gspca_dev->queue_lock);
@@ -2116,8 +2310,15 @@
usb_set_intfdata(intf, gspca_dev);
PDEBUG(D_PROBE, "%s created", video_device_node_name(&gspca_dev->vdev));
+
+ gspca_input_create_urb(gspca_dev);
+
return 0;
out:
+#ifdef CONFIG_INPUT
+ if (gspca_dev->input_dev)
+ input_unregister_device(gspca_dev->input_dev);
+#endif
kfree(gspca_dev->usb_buf);
kfree(gspca_dev);
return ret;
@@ -2133,6 +2334,9 @@
void gspca_disconnect(struct usb_interface *intf)
{
struct gspca_dev *gspca_dev = usb_get_intfdata(intf);
+#ifdef CONFIG_INPUT
+ struct input_dev *input_dev;
+#endif
PDEBUG(D_PROBE, "%s disconnect",
video_device_node_name(&gspca_dev->vdev));
@@ -2144,6 +2348,15 @@
wake_up_interruptible(&gspca_dev->wq);
}
+#ifdef CONFIG_INPUT
+ gspca_input_destroy_urb(gspca_dev);
+ input_dev = gspca_dev->input_dev;
+ if (input_dev) {
+ gspca_dev->input_dev = NULL;
+ input_unregister_device(input_dev);
+ }
+#endif
+
/* the device is freed at exit of this function */
gspca_dev->dev = NULL;
mutex_unlock(&gspca_dev->usb_lock);
@@ -2169,6 +2382,7 @@
if (gspca_dev->sd_desc->stopN)
gspca_dev->sd_desc->stopN(gspca_dev);
destroy_urbs(gspca_dev);
+ gspca_input_destroy_urb(gspca_dev);
gspca_set_alt0(gspca_dev);
if (gspca_dev->sd_desc->stop0)
gspca_dev->sd_desc->stop0(gspca_dev);
@@ -2182,6 +2396,7 @@
gspca_dev->frozen = 0;
gspca_dev->sd_desc->init(gspca_dev);
+ gspca_input_create_urb(gspca_dev);
if (gspca_dev->streaming)
return gspca_init_transfer(gspca_dev);
return 0;
@@ -2205,6 +2420,8 @@
int retval = 0;
for (i = 0; i < gspca_dev->sd_desc->nctrls; i++) {
+ if (gspca_dev->ctrl_dis & (1 << i))
+ continue;
if (gspca_dev->sd_desc->ctrls[i].qctrl.id == V4L2_CID_GAIN)
gain_ctrl = &gspca_dev->sd_desc->ctrls[i];
if (gspca_dev->sd_desc->ctrls[i].qctrl.id == V4L2_CID_EXPOSURE)
diff --git a/drivers/media/video/gspca/gspca.h b/drivers/media/video/gspca/gspca.h
index 59c7941d..02c696a 100644
--- a/drivers/media/video/gspca/gspca.h
+++ b/drivers/media/video/gspca/gspca.h
@@ -48,26 +48,27 @@
/* used to list framerates supported by a camera mode (resolution) */
struct framerates {
- int *rates;
+ const u8 *rates;
int nrates;
};
/* device information - set at probe time */
struct cam {
- int bulk_size; /* buffer size when image transfer by bulk */
const struct v4l2_pix_format *cam_mode; /* size nmodes */
- char nmodes;
const struct framerates *mode_framerates; /* must have size nmode,
* just like cam_mode */
- __u8 bulk_nurbs; /* number of URBs in bulk mode
+ u32 bulk_size; /* buffer size when image transfer by bulk */
+ u32 input_flags; /* value for ENUM_INPUT status flags */
+ u8 nmodes; /* size of cam_mode */
+ u8 no_urb_create; /* don't create transfer URBs */
+ u8 bulk_nurbs; /* number of URBs in bulk mode
* - cannot be > MAX_NURBS
* - when 0 and bulk_size != 0 means
* 1 URB and submit done by subdriver */
u8 bulk; /* image transfer by 0:isoc / 1:bulk */
u8 npkt; /* number of packets in an ISOC message
* 0 is the default value: 32 packets */
- u32 input_flags; /* value for ENUM_INPUT status flags */
- char reverse_alts; /* Alt settings are in high to low order */
+ u8 reverse_alts; /* Alt settings are in high to low order */
};
struct gspca_dev;
@@ -90,6 +91,9 @@
typedef void (*cam_pkt_op) (struct gspca_dev *gspca_dev,
u8 *data,
int len);
+typedef int (*cam_int_pkt_op) (struct gspca_dev *gspca_dev,
+ u8 *data,
+ int len);
struct ctrl {
struct v4l2_queryctrl qctrl;
@@ -125,6 +129,12 @@
cam_reg_op get_register;
#endif
cam_ident_op get_chip_ident;
+#ifdef CONFIG_INPUT
+ cam_int_pkt_op int_pkt_scan;
+ /* other_input makes the gspca core create gspca_dev->input even when
+ int_pkt_scan is NULL, for cams with non interrupt driven buttons */
+ u8 other_input;
+#endif
};
/* packet types when moving from iso buf to frame buf */
@@ -147,6 +157,10 @@
struct module *module; /* subdriver handling the device */
struct usb_device *dev;
struct file *capt_file; /* file doing video capture */
+#ifdef CONFIG_INPUT
+ struct input_dev *input_dev;
+ char phys[64]; /* physical device path */
+#endif
struct cam cam; /* device information */
const struct sd_desc *sd_desc; /* subdriver description */
@@ -156,6 +170,9 @@
#define USB_BUF_SZ 64
__u8 *usb_buf; /* buffer for USB exchanges */
struct urb *urb[MAX_NURBS];
+#ifdef CONFIG_INPUT
+ struct urb *int_urb;
+#endif
__u8 *frbuf; /* buffer for nframes */
struct gspca_frame frame[GSPCA_MAX_FRAMES];
@@ -187,7 +204,6 @@
char users; /* number of opens */
char present; /* device connected */
char nbufread; /* number of buffers for read() */
- char nurbs; /* number of allocated URBs */
char memory; /* memory type (V4L2_MEMORY_xxx) */
__u8 iface; /* USB interface number */
__u8 alt; /* USB alternate setting */
diff --git a/drivers/media/video/gspca/m5602/m5602_mt9m111.c b/drivers/media/video/gspca/m5602/m5602_mt9m111.c
index 8d071df..c0722fa 100644
--- a/drivers/media/video/gspca/m5602/m5602_mt9m111.c
+++ b/drivers/media/video/gspca/m5602/m5602_mt9m111.c
@@ -48,7 +48,7 @@
}
};
-const static struct ctrl mt9m111_ctrls[] = {
+static const struct ctrl mt9m111_ctrls[] = {
#define VFLIP_IDX 0
{
{
@@ -171,7 +171,7 @@
return -ENODEV;
}
- info("Probing for a mt9m111 sensor");
+ PDEBUG(D_PROBE, "Probing for a mt9m111 sensor");
/* Do the preinit */
for (i = 0; i < ARRAY_SIZE(preinit_mt9m111); i++) {
diff --git a/drivers/media/video/gspca/m5602/m5602_ov7660.c b/drivers/media/video/gspca/m5602/m5602_ov7660.c
index 2a28b74..62c1cbf 100644
--- a/drivers/media/video/gspca/m5602/m5602_ov7660.c
+++ b/drivers/media/video/gspca/m5602/m5602_ov7660.c
@@ -33,7 +33,7 @@
static int ov7660_get_vflip(struct gspca_dev *gspca_dev, __s32 *val);
static int ov7660_set_vflip(struct gspca_dev *gspca_dev, __s32 val);
-const static struct ctrl ov7660_ctrls[] = {
+static const struct ctrl ov7660_ctrls[] = {
#define GAIN_IDX 1
{
{
diff --git a/drivers/media/video/gspca/m5602/m5602_ov7660.h b/drivers/media/video/gspca/m5602/m5602_ov7660.h
index f5588eb..4d9dcf2 100644
--- a/drivers/media/video/gspca/m5602/m5602_ov7660.h
+++ b/drivers/media/video/gspca/m5602/m5602_ov7660.h
@@ -94,7 +94,7 @@
int ov7660_stop(struct sd *sd);
void ov7660_disconnect(struct sd *sd);
-const static struct m5602_sensor ov7660 = {
+static const struct m5602_sensor ov7660 = {
.name = "ov7660",
.i2c_slave_id = 0x42,
.i2c_regW = 1,
diff --git a/drivers/media/video/gspca/m5602/m5602_ov9650.c b/drivers/media/video/gspca/m5602/m5602_ov9650.c
index 923cdd5..069ba00 100644
--- a/drivers/media/video/gspca/m5602/m5602_ov9650.c
+++ b/drivers/media/video/gspca/m5602/m5602_ov9650.c
@@ -307,7 +307,7 @@
return -ENODEV;
}
- info("Probing for an ov9650 sensor");
+ PDEBUG(D_PROBE, "Probing for an ov9650 sensor");
/* Run the pre-init before probing the sensor */
for (i = 0; i < ARRAY_SIZE(preinit_ov9650) && !err; i++) {
diff --git a/drivers/media/video/gspca/m5602/m5602_po1030.c b/drivers/media/video/gspca/m5602/m5602_po1030.c
index 8d74d80..925b87d 100644
--- a/drivers/media/video/gspca/m5602/m5602_po1030.c
+++ b/drivers/media/video/gspca/m5602/m5602_po1030.c
@@ -205,7 +205,7 @@
return -ENODEV;
}
- info("Probing for a po1030 sensor");
+ PDEBUG(D_PROBE, "Probing for a po1030 sensor");
/* Run the pre-init to actually probe the unit */
for (i = 0; i < ARRAY_SIZE(preinit_po1030); i++) {
diff --git a/drivers/media/video/gspca/m5602/m5602_s5k4aa.c b/drivers/media/video/gspca/m5602/m5602_s5k4aa.c
index 1b536f7d..da0a38c 100644
--- a/drivers/media/video/gspca/m5602/m5602_s5k4aa.c
+++ b/drivers/media/video/gspca/m5602/m5602_s5k4aa.c
@@ -248,7 +248,7 @@
return -ENODEV;
}
- info("Probing for a s5k4aa sensor");
+ PDEBUG(D_PROBE, "Probing for a s5k4aa sensor");
/* Preinit the sensor */
for (i = 0; i < ARRAY_SIZE(preinit_s5k4aa) && !err; i++) {
diff --git a/drivers/media/video/gspca/m5602/m5602_s5k83a.c b/drivers/media/video/gspca/m5602/m5602_s5k83a.c
index 6b89f33..fbd9154 100644
--- a/drivers/media/video/gspca/m5602/m5602_s5k83a.c
+++ b/drivers/media/video/gspca/m5602/m5602_s5k83a.c
@@ -143,7 +143,7 @@
return -ENODEV;
}
- info("Probing for a s5k83a sensor");
+ PDEBUG(D_PROBE, "Probing for a s5k83a sensor");
/* Preinit the sensor */
for (i = 0; i < ARRAY_SIZE(preinit_s5k83a) && !err; i++) {
diff --git a/drivers/media/video/gspca/mars.c b/drivers/media/video/gspca/mars.c
index 9cf8d68..3d9229e 100644
--- a/drivers/media/video/gspca/mars.c
+++ b/drivers/media/video/gspca/mars.c
@@ -54,7 +54,7 @@
static int sd_setsharpness(struct gspca_dev *gspca_dev, __s32 val);
static int sd_getsharpness(struct gspca_dev *gspca_dev, __s32 *val);
-static struct ctrl sd_ctrls[] = {
+static const struct ctrl sd_ctrls[] = {
{
{
.id = V4L2_CID_BRIGHTNESS,
diff --git a/drivers/media/video/gspca/mr97310a.c b/drivers/media/video/gspca/mr97310a.c
index 9154870..33744e7 100644
--- a/drivers/media/video/gspca/mr97310a.c
+++ b/drivers/media/video/gspca/mr97310a.c
@@ -57,6 +57,14 @@
#define MR97310A_GAIN_MAX 31
#define MR97310A_GAIN_DEFAULT 25
+#define MR97310A_CONTRAST_MIN 0
+#define MR97310A_CONTRAST_MAX 31
+#define MR97310A_CONTRAST_DEFAULT 23
+
+#define MR97310A_CS_GAIN_MIN 0
+#define MR97310A_CS_GAIN_MAX 0x7ff
+#define MR97310A_CS_GAIN_DEFAULT 0x110
+
#define MR97310A_MIN_CLOCKDIV_MIN 3
#define MR97310A_MIN_CLOCKDIV_MAX 8
#define MR97310A_MIN_CLOCKDIV_DEFAULT 3
@@ -82,7 +90,8 @@
int brightness;
u16 exposure;
- u8 gain;
+ u32 gain;
+ u8 contrast;
u8 min_clockdiv;
};
@@ -98,6 +107,8 @@
static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val);
static int sd_setexposure(struct gspca_dev *gspca_dev, __s32 val);
static int sd_getexposure(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_getcontrast(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_setcontrast(struct gspca_dev *gspca_dev, __s32 val);
static int sd_setgain(struct gspca_dev *gspca_dev, __s32 val);
static int sd_getgain(struct gspca_dev *gspca_dev, __s32 *val);
static int sd_setmin_clockdiv(struct gspca_dev *gspca_dev, __s32 val);
@@ -105,11 +116,13 @@
static void setbrightness(struct gspca_dev *gspca_dev);
static void setexposure(struct gspca_dev *gspca_dev);
static void setgain(struct gspca_dev *gspca_dev);
+static void setcontrast(struct gspca_dev *gspca_dev);
/* V4L2 controls supported by the driver */
-static struct ctrl sd_ctrls[] = {
+static const struct ctrl sd_ctrls[] = {
/* Separate brightness control description for Argus QuickClix as it has
- different limits from the other mr97310a cameras */
+ * different limits from the other mr97310a cameras, and separate gain
+ * control for Sakar CyberPix camera. */
{
#define NORM_BRIGHTNESS_IDX 0
{
@@ -171,7 +184,37 @@
.get = sd_getgain,
},
{
-#define MIN_CLOCKDIV_IDX 4
+#define SAKAR_CS_GAIN_IDX 4
+ {
+ .id = V4L2_CID_GAIN,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Gain",
+ .minimum = MR97310A_CS_GAIN_MIN,
+ .maximum = MR97310A_CS_GAIN_MAX,
+ .step = 1,
+ .default_value = MR97310A_CS_GAIN_DEFAULT,
+ .flags = 0,
+ },
+ .set = sd_setgain,
+ .get = sd_getgain,
+ },
+ {
+#define CONTRAST_IDX 5
+ {
+ .id = V4L2_CID_CONTRAST,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Contrast",
+ .minimum = MR97310A_CONTRAST_MIN,
+ .maximum = MR97310A_CONTRAST_MAX,
+ .step = 1,
+ .default_value = MR97310A_CONTRAST_DEFAULT,
+ .flags = 0,
+ },
+ .set = sd_setcontrast,
+ .get = sd_getcontrast,
+ },
+ {
+#define MIN_CLOCKDIV_IDX 6
{
.id = V4L2_CID_PRIVATE_BASE,
.type = V4L2_CTRL_TYPE_INTEGER,
@@ -327,7 +370,6 @@
if (err_code < 0)
return err_code;
- err_code = mr_write(gspca_dev, 1);
data[0] = 0x19;
data[1] = 0x51;
err_code = mr_write(gspca_dev, 2);
@@ -437,6 +479,7 @@
{
struct sd *sd = (struct sd *) gspca_dev;
struct cam *cam;
+ int gain_default = MR97310A_GAIN_DEFAULT;
int err_code;
cam = &gspca_dev->cam;
@@ -460,12 +503,14 @@
if (err_code < 0)
return err_code;
+ /* Now, the query for sensor type. */
+ err_code = cam_get_response16(gspca_dev, 0x07, 1);
+ if (err_code < 0)
+ return err_code;
+
if (id->idProduct == 0x0110 || id->idProduct == 0x010e) {
sd->cam_type = CAM_TYPE_CIF;
cam->nmodes--;
- err_code = cam_get_response16(gspca_dev, 0x06, 1);
- if (err_code < 0)
- return err_code;
/*
* All but one of the known CIF cameras share the same USB ID,
* but two different init routines are in use, and the control
@@ -473,12 +518,12 @@
* of the two known varieties is connected!
*
* A list of known CIF cameras follows. They all report either
- * 0002 for type 0 or 0003 for type 1.
+ * 0200 for type 0 or 0300 for type 1.
* If you have another to report, please do
*
* Name sd->sensor_type reported by
*
- * Sakar Spy-shot 0 T. Kilgore
+ * Sakar 56379 Spy-shot 0 T. Kilgore
* Innovage 0 T. Kilgore
* Vivitar Mini 0 H. De Goede
* Vivitar Mini 0 E. Rodriguez
@@ -487,7 +532,7 @@
* Philips dig. keych. 1 T. Kilgore
* Trust Spyc@m 100 1 A. Jacobs
*/
- switch (gspca_dev->usb_buf[1]) {
+ switch (gspca_dev->usb_buf[0]) {
case 2:
sd->sensor_type = 0;
break;
@@ -504,20 +549,19 @@
} else {
sd->cam_type = CAM_TYPE_VGA;
- err_code = cam_get_response16(gspca_dev, 0x07, 1);
- if (err_code < 0)
- return err_code;
-
/*
- * Here is a table of the responses to the previous command
- * from the known MR97310A VGA cameras.
+ * Here is a table of the responses to the query for sensor
+ * type, from the known MR97310A VGA cameras. Six different
+ * cameras of which five share the same USB ID.
*
* Name gspca_dev->usb_buf[] sd->sensor_type
* sd->do_lcd_stop
* Aiptek Pencam VGA+ 0300 0 1
- * ION digital 0350 0 1
+ * ION digital 0300 0 1
* Argus DC-1620 0450 1 0
* Argus QuickClix 0420 1 1
+ * Sakar 77379 Digital 0350 0 1
+ * Sakar 1638x CyberPix 0120 0 2
*
* Based upon these results, we assume default settings
* and then correct as necessary, as follows.
@@ -527,10 +571,12 @@
sd->sensor_type = 1;
sd->do_lcd_stop = 0;
sd->adj_colors = 0;
- if ((gspca_dev->usb_buf[0] != 0x03) &&
+ if (gspca_dev->usb_buf[0] == 0x01) {
+ sd->sensor_type = 2;
+ } else if ((gspca_dev->usb_buf[0] != 0x03) &&
(gspca_dev->usb_buf[0] != 0x04)) {
PDEBUG(D_ERR, "Unknown VGA Sensor id Byte 0: %02x",
- gspca_dev->usb_buf[1]);
+ gspca_dev->usb_buf[0]);
PDEBUG(D_ERR, "Defaults assumed, may not work");
PDEBUG(D_ERR, "Please report this");
}
@@ -560,7 +606,7 @@
PDEBUG(D_PROBE, "MR97310A VGA camera detected, sensor: %d",
sd->sensor_type);
}
- /* Stop streaming as we've started it to probe the sensor type. */
+ /* Stop streaming as we've started it only to probe the sensor type. */
sd_stopN(gspca_dev);
if (force_sensor_type != -1) {
@@ -574,9 +620,13 @@
/* No brightness for sensor_type 0 */
if (sd->sensor_type == 0)
gspca_dev->ctrl_dis = (1 << NORM_BRIGHTNESS_IDX) |
- (1 << ARGUS_QC_BRIGHTNESS_IDX);
+ (1 << ARGUS_QC_BRIGHTNESS_IDX) |
+ (1 << CONTRAST_IDX) |
+ (1 << SAKAR_CS_GAIN_IDX);
else
gspca_dev->ctrl_dis = (1 << ARGUS_QC_BRIGHTNESS_IDX) |
+ (1 << CONTRAST_IDX) |
+ (1 << SAKAR_CS_GAIN_IDX) |
(1 << MIN_CLOCKDIV_IDX);
} else {
/* All controls need to be disabled if VGA sensor_type is 0 */
@@ -585,17 +635,30 @@
(1 << ARGUS_QC_BRIGHTNESS_IDX) |
(1 << EXPOSURE_IDX) |
(1 << GAIN_IDX) |
+ (1 << CONTRAST_IDX) |
+ (1 << SAKAR_CS_GAIN_IDX) |
(1 << MIN_CLOCKDIV_IDX);
- else if (sd->do_lcd_stop)
+ else if (sd->sensor_type == 2) {
+ gspca_dev->ctrl_dis = (1 << NORM_BRIGHTNESS_IDX) |
+ (1 << ARGUS_QC_BRIGHTNESS_IDX) |
+ (1 << GAIN_IDX) |
+ (1 << MIN_CLOCKDIV_IDX);
+ gain_default = MR97310A_CS_GAIN_DEFAULT;
+ } else if (sd->do_lcd_stop)
/* Argus QuickClix has different brightness limits */
- gspca_dev->ctrl_dis = (1 << NORM_BRIGHTNESS_IDX);
+ gspca_dev->ctrl_dis = (1 << NORM_BRIGHTNESS_IDX) |
+ (1 << CONTRAST_IDX) |
+ (1 << SAKAR_CS_GAIN_IDX);
else
- gspca_dev->ctrl_dis = (1 << ARGUS_QC_BRIGHTNESS_IDX);
+ gspca_dev->ctrl_dis = (1 << ARGUS_QC_BRIGHTNESS_IDX) |
+ (1 << CONTRAST_IDX) |
+ (1 << SAKAR_CS_GAIN_IDX);
}
sd->brightness = MR97310A_BRIGHTNESS_DEFAULT;
sd->exposure = MR97310A_EXPOSURE_DEFAULT;
- sd->gain = MR97310A_GAIN_DEFAULT;
+ sd->gain = gain_default;
+ sd->contrast = MR97310A_CONTRAST_DEFAULT;
sd->min_clockdiv = MR97310A_MIN_CLOCKDIV_DEFAULT;
return 0;
@@ -697,6 +760,12 @@
{0x13, 0x00, {0x01}, 1},
{0, 0, {0}, 0}
};
+ /* Without this command the cam won't work with USB-UHCI */
+ gspca_dev->usb_buf[0] = 0x0a;
+ gspca_dev->usb_buf[1] = 0x00;
+ err_code = mr_write(gspca_dev, 2);
+ if (err_code < 0)
+ return err_code;
err_code = sensor_write_regs(gspca_dev, cif_sensor1_init_data,
ARRAY_SIZE(cif_sensor1_init_data));
}
@@ -717,6 +786,10 @@
data[5] = 0x00;
data[10] = 0x91;
}
+ if (sd->sensor_type == 2) {
+ data[5] = 0x00;
+ data[10] = 0x18;
+ }
switch (gspca_dev->width) {
case 160:
@@ -731,6 +804,10 @@
data[4] = 0x78; /* reg 3, V size/4 */
data[6] = 0x04; /* reg 5, H start */
data[8] = 0x03; /* reg 7, V start */
+ if (sd->sensor_type == 2) {
+ data[6] = 2;
+ data[8] = 1;
+ }
if (sd->do_lcd_stop)
data[8] = 0x04; /* Bayer tile shifted */
break;
@@ -753,7 +830,6 @@
return err_code;
if (!sd->sensor_type) {
- /* The only known sensor_type 0 cam is the Argus DC-1620 */
const struct sensor_w_data vga_sensor0_init_data[] = {
{0x01, 0x00, {0x0c, 0x00, 0x04}, 3},
{0x14, 0x00, {0x01, 0xe4, 0x02, 0x84}, 4},
@@ -764,7 +840,7 @@
};
err_code = sensor_write_regs(gspca_dev, vga_sensor0_init_data,
ARRAY_SIZE(vga_sensor0_init_data));
- } else { /* sd->sensor_type = 1 */
+ } else if (sd->sensor_type == 1) {
const struct sensor_w_data color_adj[] = {
{0x02, 0x00, {0x06, 0x59, 0x0c, 0x16, 0x00,
/* adjusted blue, green, red gain correct
@@ -802,6 +878,48 @@
err_code = sensor_write_regs(gspca_dev, vga_sensor1_init_data,
ARRAY_SIZE(vga_sensor1_init_data));
+ } else { /* sensor type == 2 */
+ const struct sensor_w_data vga_sensor2_init_data[] = {
+
+ {0x01, 0x00, {0x48}, 1},
+ {0x02, 0x00, {0x22}, 1},
+ /* Reg 3 msb and 4 is lsb of the exposure setting*/
+ {0x05, 0x00, {0x10}, 1},
+ {0x06, 0x00, {0x00}, 1},
+ {0x07, 0x00, {0x00}, 1},
+ {0x08, 0x00, {0x00}, 1},
+ {0x09, 0x00, {0x00}, 1},
+ /* The following are used in the gain control
+ * which is BTW completely borked in the OEM driver
+ * The values for each color go from 0 to 0x7ff
+ *{0x0a, 0x00, {0x01}, 1}, green1 gain msb
+ *{0x0b, 0x00, {0x10}, 1}, green1 gain lsb
+ *{0x0c, 0x00, {0x01}, 1}, red gain msb
+ *{0x0d, 0x00, {0x10}, 1}, red gain lsb
+ *{0x0e, 0x00, {0x01}, 1}, blue gain msb
+ *{0x0f, 0x00, {0x10}, 1}, blue gain lsb
+ *{0x10, 0x00, {0x01}, 1}, green2 gain msb
+ *{0x11, 0x00, {0x10}, 1}, green2 gain lsb
+ */
+ {0x12, 0x00, {0x00}, 1},
+ {0x13, 0x00, {0x04}, 1}, /* weird effect on colors */
+ {0x14, 0x00, {0x00}, 1},
+ {0x15, 0x00, {0x06}, 1},
+ {0x16, 0x00, {0x01}, 1},
+ {0x17, 0x00, {0xe2}, 1}, /* vertical alignment */
+ {0x18, 0x00, {0x02}, 1},
+ {0x19, 0x00, {0x82}, 1}, /* don't mess with */
+ {0x1a, 0x00, {0x00}, 1},
+ {0x1b, 0x00, {0x20}, 1},
+ /* {0x1c, 0x00, {0x17}, 1}, contrast control */
+ {0x1d, 0x00, {0x80}, 1}, /* moving causes a mess */
+ {0x1e, 0x00, {0x08}, 1}, /* moving jams the camera */
+ {0x1f, 0x00, {0x0c}, 1},
+ {0x20, 0x00, {0x00}, 1},
+ {0, 0, {0}, 0}
+ };
+ err_code = sensor_write_regs(gspca_dev, vga_sensor2_init_data,
+ ARRAY_SIZE(vga_sensor2_init_data));
}
return err_code;
}
@@ -834,6 +952,7 @@
return err_code;
setbrightness(gspca_dev);
+ setcontrast(gspca_dev);
setexposure(gspca_dev);
setgain(gspca_dev);
@@ -893,7 +1012,7 @@
static void setexposure(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
- int exposure;
+ int exposure = MR97310A_EXPOSURE_DEFAULT;
u8 buf[2];
if (gspca_dev->ctrl_dis & (1 << EXPOSURE_IDX))
@@ -905,6 +1024,11 @@
exposure = (sd->exposure * 9267) / 10000 + 300;
sensor_write1(gspca_dev, 3, exposure >> 4);
sensor_write1(gspca_dev, 4, exposure & 0x0f);
+ } else if (sd->sensor_type == 2) {
+ exposure = sd->exposure;
+ exposure >>= 3;
+ sensor_write1(gspca_dev, 3, exposure >> 8);
+ sensor_write1(gspca_dev, 4, exposure & 0xff);
} else {
/* We have both a clock divider and an exposure register.
We first calculate the clock divider, as that determines
@@ -943,17 +1067,34 @@
static void setgain(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
+ u8 gainreg;
- if (gspca_dev->ctrl_dis & (1 << GAIN_IDX))
+ if ((gspca_dev->ctrl_dis & (1 << GAIN_IDX)) &&
+ (gspca_dev->ctrl_dis & (1 << SAKAR_CS_GAIN_IDX)))
return;
- if (sd->cam_type == CAM_TYPE_CIF && sd->sensor_type == 1) {
+ if (sd->cam_type == CAM_TYPE_CIF && sd->sensor_type == 1)
sensor_write1(gspca_dev, 0x0e, sd->gain);
- } else {
+ else if (sd->cam_type == CAM_TYPE_VGA && sd->sensor_type == 2)
+ for (gainreg = 0x0a; gainreg < 0x11; gainreg += 2) {
+ sensor_write1(gspca_dev, gainreg, sd->gain >> 8);
+ sensor_write1(gspca_dev, gainreg + 1, sd->gain & 0xff);
+ }
+ else
sensor_write1(gspca_dev, 0x10, sd->gain);
- }
}
+static void setcontrast(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ if (gspca_dev->ctrl_dis & (1 << CONTRAST_IDX))
+ return;
+
+ sensor_write1(gspca_dev, 0x1c, sd->contrast);
+}
+
+
static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val)
{
struct sd *sd = (struct sd *) gspca_dev;
@@ -1008,6 +1149,25 @@
return 0;
}
+static int sd_setcontrast(struct gspca_dev *gspca_dev, __s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->contrast = val;
+ if (gspca_dev->streaming)
+ setcontrast(gspca_dev);
+ return 0;
+}
+
+
+static int sd_getcontrast(struct gspca_dev *gspca_dev, __s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ *val = sd->contrast;
+ return 0;
+}
+
static int sd_setmin_clockdiv(struct gspca_dev *gspca_dev, __s32 val)
{
struct sd *sd = (struct sd *) gspca_dev;
diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c
index b4f9657..bc4ced6 100644
--- a/drivers/media/video/gspca/ov519.c
+++ b/drivers/media/video/gspca/ov519.c
@@ -38,6 +38,7 @@
*/
#define MODULE_NAME "ov519"
+#include <linux/input.h>
#include "gspca.h"
MODULE_AUTHOR("Jean-Francois Moine <http://moinejf.free.fr>");
@@ -70,6 +71,9 @@
char invert_led;
#define BRIDGE_INVERT_LED 8
+ char snapshot_pressed;
+ char snapshot_needs_reset;
+
/* Determined by sensor type */
__u8 sif;
@@ -99,10 +103,12 @@
#define SEN_OV66308AF 5
#define SEN_OV7610 6
#define SEN_OV7620 7
-#define SEN_OV7640 8
-#define SEN_OV7670 9
-#define SEN_OV76BE 10
-#define SEN_OV8610 11
+#define SEN_OV7620AE 8
+#define SEN_OV7640 9
+#define SEN_OV7648 10
+#define SEN_OV7670 11
+#define SEN_OV76BE 12
+#define SEN_OV8610 13
u8 sensor_addr;
int sensor_width;
@@ -139,6 +145,7 @@
static void setfreq(struct sd *sd);
static const struct ctrl sd_ctrls[] = {
+#define BRIGHTNESS_IDX 0
{
{
.id = V4L2_CID_BRIGHTNESS,
@@ -153,6 +160,7 @@
.set = sd_setbrightness,
.get = sd_getbrightness,
},
+#define CONTRAST_IDX 1
{
{
.id = V4L2_CID_CONTRAST,
@@ -167,6 +175,7 @@
.set = sd_setcontrast,
.get = sd_getcontrast,
},
+#define COLOR_IDX 2
{
{
.id = V4L2_CID_SATURATION,
@@ -2554,7 +2563,7 @@
/* I don't know what's different about the 76BE yet. */
if (i2c_r(sd, 0x15) & 1) {
PDEBUG(D_PROBE, "Sensor is an OV7620AE");
- sd->sensor = SEN_OV7620;
+ sd->sensor = SEN_OV7620AE;
} else {
PDEBUG(D_PROBE, "Sensor is an OV76BE");
sd->sensor = SEN_OV76BE;
@@ -2588,7 +2597,7 @@
break;
case 0x48:
PDEBUG(D_PROBE, "Sensor is an OV7648");
- sd->sensor = SEN_OV7640; /* FIXME */
+ sd->sensor = SEN_OV7648;
break;
default:
PDEBUG(D_PROBE, "Unknown sensor: 0x76%x", low);
@@ -2680,6 +2689,36 @@
}
}
+static void sd_reset_snapshot(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ if (!sd->snapshot_needs_reset)
+ return;
+
+ /* Note it is important that we clear sd->snapshot_needs_reset,
+ before actually clearing the snapshot state in the bridge
+ otherwise we might race with the pkt_scan interrupt handler */
+ sd->snapshot_needs_reset = 0;
+
+ switch (sd->bridge) {
+ case BRIDGE_OV511:
+ case BRIDGE_OV511PLUS:
+ reg_w(sd, R51x_SYS_SNAP, 0x02);
+ reg_w(sd, R51x_SYS_SNAP, 0x00);
+ break;
+ case BRIDGE_OV518:
+ case BRIDGE_OV518PLUS:
+ reg_w(sd, R51x_SYS_SNAP, 0x02); /* Reset */
+ reg_w(sd, R51x_SYS_SNAP, 0x01); /* Enable */
+ break;
+ case BRIDGE_OV519:
+ reg_w(sd, R51x_SYS_RESET, 0x40);
+ reg_w(sd, R51x_SYS_RESET, 0x00);
+ break;
+ }
+}
+
static int ov51x_upload_quan_tables(struct sd *sd)
{
const unsigned char yQuanTable511[] = {
@@ -3115,7 +3154,11 @@
(1 << OV7670_FREQ_IDX);
}
sd->quality = QUALITY_DEF;
- if (sd->sensor == SEN_OV7640 || sd->sensor == SEN_OV7670)
+ if (sd->sensor == SEN_OV7640 ||
+ sd->sensor == SEN_OV7648)
+ gspca_dev->ctrl_dis |= (1 << AUTOBRIGHT_IDX) |
+ (1 << CONTRAST_IDX);
+ if (sd->sensor == SEN_OV7670)
gspca_dev->ctrl_dis |= 1 << AUTOBRIGHT_IDX;
/* OV8610 Frequency filter control should work but needs testing */
if (sd->sensor == SEN_OV8610)
@@ -3169,10 +3212,12 @@
return -EIO;
break;
case SEN_OV7620:
+ case SEN_OV7620AE:
if (write_i2c_regvals(sd, norm_7620, ARRAY_SIZE(norm_7620)))
return -EIO;
break;
case SEN_OV7640:
+ case SEN_OV7648:
if (write_i2c_regvals(sd, norm_7640, ARRAY_SIZE(norm_7640)))
return -EIO;
break;
@@ -3246,7 +3291,9 @@
/* Note once the FIXME's in mode_init_ov_sensor_regs() are fixed
for more sensors we need to do this for them too */
case SEN_OV7620:
+ case SEN_OV7620AE:
case SEN_OV7640:
+ case SEN_OV7648:
case SEN_OV76BE:
if (sd->gspca_dev.width == 320)
interlaced = 1;
@@ -3377,7 +3424,7 @@
if (sd->bridge == BRIDGE_OV518PLUS) {
switch (sd->sensor) {
- case SEN_OV7620:
+ case SEN_OV7620AE:
if (sd->gspca_dev.width == 320) {
reg_w(sd, 0x20, 0x00);
reg_w(sd, 0x21, 0x19);
@@ -3386,6 +3433,10 @@
reg_w(sd, 0x21, 0x1f);
}
break;
+ case SEN_OV7620:
+ reg_w(sd, 0x20, 0x00);
+ reg_w(sd, 0x21, 0x19);
+ break;
default:
reg_w(sd, 0x21, 0x19);
}
@@ -3488,7 +3539,8 @@
if (write_regvals(sd, mode_init_519,
ARRAY_SIZE(mode_init_519)))
return -EIO;
- if (sd->sensor == SEN_OV7640) {
+ if (sd->sensor == SEN_OV7640 ||
+ sd->sensor == SEN_OV7648) {
/* Select 8-bit input mode */
reg_w_mask(sd, OV519_R20_DFR, 0x10, 0x10);
}
@@ -3503,6 +3555,9 @@
if (sd->sensor == SEN_OV7670 &&
sd->gspca_dev.cam.cam_mode[sd->gspca_dev.curr_mode].priv)
reg_w(sd, OV519_R12_X_OFFSETL, 0x04);
+ else if (sd->sensor == SEN_OV7648 &&
+ sd->gspca_dev.cam.cam_mode[sd->gspca_dev.curr_mode].priv)
+ reg_w(sd, OV519_R12_X_OFFSETL, 0x01);
else
reg_w(sd, OV519_R12_X_OFFSETL, 0x00);
reg_w(sd, OV519_R13_X_OFFSETH, 0x00);
@@ -3520,6 +3575,7 @@
sd->clockdiv = 0;
switch (sd->sensor) {
case SEN_OV7640:
+ case SEN_OV7648:
switch (sd->frame_rate) {
default:
/* case 30: */
@@ -3649,6 +3705,7 @@
i2c_w_mask(sd, 0x12, 0x04, 0x06); /* AWB: 1 Test pattern: 0 */
break;
case SEN_OV7620:
+ case SEN_OV7620AE:
case SEN_OV76BE:
i2c_w_mask(sd, 0x14, qvga ? 0x20 : 0x00, 0x20);
i2c_w_mask(sd, 0x28, qvga ? 0x00 : 0x20, 0x20);
@@ -3663,13 +3720,16 @@
i2c_w(sd, 0x35, qvga ? 0x1e : 0x9e);
break;
case SEN_OV7640:
+ case SEN_OV7648:
i2c_w_mask(sd, 0x14, qvga ? 0x20 : 0x00, 0x20);
i2c_w_mask(sd, 0x28, qvga ? 0x00 : 0x20, 0x20);
-/* i2c_w(sd, 0x24, qvga ? 0x20 : 0x3a); */
-/* i2c_w(sd, 0x25, qvga ? 0x30 : 0x60); */
-/* i2c_w_mask(sd, 0x2d, qvga ? 0x40 : 0x00, 0x40); */
-/* i2c_w_mask(sd, 0x67, qvga ? 0xf0 : 0x90, 0xf0); */
-/* i2c_w_mask(sd, 0x74, qvga ? 0x20 : 0x00, 0x20); */
+ /* Setting this undocumented bit in qvga mode removes a very
+ annoying vertical shaking of the image */
+ i2c_w_mask(sd, 0x2d, qvga ? 0x40 : 0x00, 0x40);
+ /* Unknown */
+ i2c_w_mask(sd, 0x67, qvga ? 0xf0 : 0x90, 0xf0);
+ /* Allow higher automatic gain (to allow higher framerates) */
+ i2c_w_mask(sd, 0x74, qvga ? 0x20 : 0x00, 0x20);
i2c_w_mask(sd, 0x12, 0x04, 0x04); /* AWB: 1 */
break;
case SEN_OV7670:
@@ -3795,11 +3855,13 @@
}
break;
case SEN_OV7620:
+ case SEN_OV7620AE:
hwsbase = 0x2f; /* From 7620.SET (spec is wrong) */
hwebase = 0x2f;
vwsbase = vwebase = 0x05;
break;
case SEN_OV7640:
+ case SEN_OV7648:
hwsbase = 0x1a;
hwebase = 0x1a;
vwsbase = vwebase = 0x03;
@@ -3893,6 +3955,12 @@
setautobrightness(sd);
setfreq(sd);
+ /* Force clear snapshot state in case the snapshot button was
+ pressed while we weren't streaming */
+ sd->snapshot_needs_reset = 1;
+ sd_reset_snapshot(gspca_dev);
+ sd->snapshot_pressed = 0;
+
ret = ov51x_restart(sd);
if (ret < 0)
goto out;
@@ -3919,6 +3987,34 @@
w9968cf_stop0(sd);
}
+static void ov51x_handle_button(struct gspca_dev *gspca_dev, u8 state)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ if (sd->snapshot_pressed != state) {
+#ifdef CONFIG_INPUT
+ input_report_key(gspca_dev->input_dev, KEY_CAMERA, state);
+ input_sync(gspca_dev->input_dev);
+#endif
+ if (state)
+ sd->snapshot_needs_reset = 1;
+
+ sd->snapshot_pressed = state;
+ } else {
+ /* On the ov511 / ov519 we need to reset the button state
+ multiple times, as resetting does not work as long as the
+ button stays pressed */
+ switch (sd->bridge) {
+ case BRIDGE_OV511:
+ case BRIDGE_OV511PLUS:
+ case BRIDGE_OV519:
+ if (state)
+ sd->snapshot_needs_reset = 1;
+ break;
+ }
+ }
+}
+
static void ov511_pkt_scan(struct gspca_dev *gspca_dev,
u8 *in, /* isoc packet */
int len) /* iso packet length */
@@ -3940,6 +4036,7 @@
*/
if (!(in[0] | in[1] | in[2] | in[3] | in[4] | in[5] | in[6] | in[7]) &&
(in[8] & 0x08)) {
+ ov51x_handle_button(gspca_dev, (in[8] >> 2) & 1);
if (in[8] & 0x80) {
/* Frame end */
if ((in[9] + 1) * 8 != gspca_dev->width ||
@@ -3977,6 +4074,7 @@
/* A false positive here is likely, until OVT gives me
* the definitive SOF/EOF format */
if ((!(data[0] | data[1] | data[2] | data[3] | data[5])) && data[6]) {
+ ov51x_handle_button(gspca_dev, (data[6] >> 1) & 1);
gspca_frame_add(gspca_dev, LAST_PACKET, NULL, 0);
gspca_frame_add(gspca_dev, FIRST_PACKET, NULL, 0);
sd->packet_nr = 0;
@@ -4024,6 +4122,9 @@
if (data[0] == 0xff && data[1] == 0xff && data[2] == 0xff) {
switch (data[3]) {
case 0x50: /* start of frame */
+ /* Don't check the button state here, as the state
+ usually (always ?) changes at EOF and checking it
+ here leads to unnecessary snapshot state resets. */
#define HDRSZ 16
data += HDRSZ;
len -= HDRSZ;
@@ -4035,6 +4136,7 @@
gspca_dev->last_packet_type = DISCARD_PACKET;
return;
case 0x51: /* end of frame */
+ ov51x_handle_button(gspca_dev, data[11] & 1);
if (data[9] != 0)
gspca_dev->last_packet_type = DISCARD_PACKET;
gspca_frame_add(gspca_dev, LAST_PACKET,
@@ -4103,9 +4205,11 @@
case SEN_OV6630:
case SEN_OV66308AF:
case SEN_OV7640:
+ case SEN_OV7648:
i2c_w(sd, OV7610_REG_BRT, val);
break;
case SEN_OV7620:
+ case SEN_OV7620AE:
/* 7620 doesn't like manual changes when in auto mode */
if (!sd->autobrightness)
i2c_w(sd, OV7610_REG_BRT, val);
@@ -4142,7 +4246,8 @@
i2c_w(sd, 0x64, ctab[val >> 5]);
break;
}
- case SEN_OV7620: {
+ case SEN_OV7620:
+ case SEN_OV7620AE: {
static const __u8 ctab[] = {
0x01, 0x05, 0x09, 0x11, 0x15, 0x35, 0x37, 0x57,
0x5b, 0xa5, 0xa7, 0xc7, 0xc9, 0xcf, 0xef, 0xff
@@ -4152,10 +4257,6 @@
i2c_w(sd, 0x64, ctab[val >> 4]);
break;
}
- case SEN_OV7640:
- /* Use gain control instead. */
- i2c_w(sd, OV7610_REG_GAIN, val >> 2);
- break;
case SEN_OV7670:
/* check that this isn't just the same as ov7610 */
i2c_w(sd, OV7670_REG_CONTRAS, val >> 1);
@@ -4179,6 +4280,7 @@
i2c_w(sd, OV7610_REG_SAT, val);
break;
case SEN_OV7620:
+ case SEN_OV7620AE:
/* Use UV gamma control instead. Bits 0 & 7 are reserved. */
/* rc = ov_i2c_write(sd->dev, 0x62, (val >> 9) & 0x7e);
if (rc < 0)
@@ -4186,6 +4288,7 @@
i2c_w(sd, OV7610_REG_SAT, val);
break;
case SEN_OV7640:
+ case SEN_OV7648:
i2c_w(sd, OV7610_REG_SAT, val & 0xf0);
break;
case SEN_OV7670:
@@ -4198,7 +4301,8 @@
static void setautobrightness(struct sd *sd)
{
- if (sd->sensor == SEN_OV7640 || sd->sensor == SEN_OV7670 ||
+ if (sd->sensor == SEN_OV7640 || sd->sensor == SEN_OV7648 ||
+ sd->sensor == SEN_OV7670 ||
sd->sensor == SEN_OV2610 || sd->sensor == SEN_OV3610)
return;
@@ -4475,9 +4579,13 @@
.stopN = sd_stopN,
.stop0 = sd_stop0,
.pkt_scan = sd_pkt_scan,
+ .dq_callback = sd_reset_snapshot,
.querymenu = sd_querymenu,
.get_jcomp = sd_get_jcomp,
.set_jcomp = sd_set_jcomp,
+#ifdef CONFIG_INPUT
+ .other_input = 1,
+#endif
};
/* -- module initialisation -- */
@@ -4494,7 +4602,8 @@
.driver_info = BRIDGE_OV519 | BRIDGE_INVERT_LED },
{USB_DEVICE(0x045e, 0x028c), .driver_info = BRIDGE_OV519 },
{USB_DEVICE(0x054c, 0x0154), .driver_info = BRIDGE_OV519 },
- {USB_DEVICE(0x054c, 0x0155), .driver_info = BRIDGE_OV519 },
+ {USB_DEVICE(0x054c, 0x0155),
+ .driver_info = BRIDGE_OV519 | BRIDGE_INVERT_LED },
{USB_DEVICE(0x05a9, 0x0511), .driver_info = BRIDGE_OV511 },
{USB_DEVICE(0x05a9, 0x0518), .driver_info = BRIDGE_OV518 },
{USB_DEVICE(0x05a9, 0x0519), .driver_info = BRIDGE_OV519 },
diff --git a/drivers/media/video/gspca/ov534.c b/drivers/media/video/gspca/ov534.c
index 0a6b8f0..957e05e 100644
--- a/drivers/media/video/gspca/ov534.c
+++ b/drivers/media/video/gspca/ov534.c
@@ -1,5 +1,5 @@
/*
- * ov534 gspca driver
+ * ov534-ov772x gspca driver
*
* Copyright (C) 2008 Antonio Ospite <ospite@studenti.unina.it>
* Copyright (C) 2008 Jim Paris <jim@jtan.com>
@@ -68,12 +68,7 @@
s8 sharpness;
u8 hflip;
u8 vflip;
- u8 satur;
- u8 lightfreq;
- u8 sensor;
-#define SENSOR_OV772X 0
-#define SENSOR_OV965X 1
};
/* V4L2 controls supported by the driver */
@@ -101,12 +96,8 @@
static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val);
static int sd_setcontrast(struct gspca_dev *gspca_dev, __s32 val);
static int sd_getcontrast(struct gspca_dev *gspca_dev, __s32 *val);
-static int sd_setsatur(struct gspca_dev *gspca_dev, __s32 val);
-static int sd_getsatur(struct gspca_dev *gspca_dev, __s32 *val);
-static int sd_setfreq(struct gspca_dev *gspca_dev, __s32 val);
-static int sd_getfreq(struct gspca_dev *gspca_dev, __s32 *val);
-static struct ctrl sd_ctrls_ov772x[] = {
+static const struct ctrl sd_ctrls[] = {
{ /* 0 */
{
.id = V4L2_CID_BRIGHTNESS,
@@ -115,8 +106,8 @@
.minimum = 0,
.maximum = 255,
.step = 1,
-#define BRIGHTNESS_77_DEF 20
- .default_value = BRIGHTNESS_77_DEF,
+#define BRIGHTNESS_DEF 20
+ .default_value = BRIGHTNESS_DEF,
},
.set = sd_setbrightness,
.get = sd_getbrightness,
@@ -129,8 +120,8 @@
.minimum = 0,
.maximum = 255,
.step = 1,
-#define CONTRAST_77_DEF 37
- .default_value = CONTRAST_77_DEF,
+#define CONTRAST_DEF 37
+ .default_value = CONTRAST_DEF,
},
.set = sd_setcontrast,
.get = sd_getcontrast,
@@ -157,8 +148,8 @@
.minimum = 0,
.maximum = 255,
.step = 1,
-#define EXPO_77_DEF 120
- .default_value = EXPO_77_DEF,
+#define EXPO_DEF 120
+ .default_value = EXPO_DEF,
},
.set = sd_setexposure,
.get = sd_getexposure,
@@ -213,13 +204,13 @@
.minimum = 0,
.maximum = 1,
.step = 1,
-#define AUTOGAIN_77_DEF 0
- .default_value = AUTOGAIN_77_DEF,
+#define AUTOGAIN_DEF 0
+ .default_value = AUTOGAIN_DEF,
},
.set = sd_setautogain,
.get = sd_getautogain,
},
-#define AWB_77_IDX 8
+#define AWB_IDX 8
{ /* 8 */
{
.id = V4L2_CID_AUTO_WHITE_BALANCE,
@@ -242,8 +233,8 @@
.minimum = 0,
.maximum = 63,
.step = 1,
-#define SHARPNESS_77_DEF 0
- .default_value = SHARPNESS_77_DEF,
+#define SHARPNESS_DEF 0
+ .default_value = SHARPNESS_DEF,
},
.set = sd_setsharpness,
.get = sd_getsharpness,
@@ -277,107 +268,6 @@
.get = sd_getvflip,
},
};
-static struct ctrl sd_ctrls_ov965x[] = {
- { /* 0 */
- {
- .id = V4L2_CID_BRIGHTNESS,
- .type = V4L2_CTRL_TYPE_INTEGER,
- .name = "Brightness",
- .minimum = 0,
- .maximum = 15,
- .step = 1,
-#define BRIGHTNESS_96_DEF 7
- .default_value = BRIGHTNESS_96_DEF,
- },
- .set = sd_setbrightness,
- .get = sd_getbrightness,
- },
- { /* 1 */
- {
- .id = V4L2_CID_CONTRAST,
- .type = V4L2_CTRL_TYPE_INTEGER,
- .name = "Contrast",
- .minimum = 0,
- .maximum = 15,
- .step = 1,
-#define CONTRAST_96_DEF 3
- .default_value = CONTRAST_96_DEF,
- },
- .set = sd_setcontrast,
- .get = sd_getcontrast,
- },
- { /* 2 */
- {
- .id = V4L2_CID_AUTOGAIN,
- .type = V4L2_CTRL_TYPE_BOOLEAN,
- .name = "Autogain",
- .minimum = 0,
- .maximum = 1,
- .step = 1,
-#define AUTOGAIN_96_DEF 1
- .default_value = AUTOGAIN_96_DEF,
- },
- .set = sd_setautogain,
- .get = sd_getautogain,
- },
-#define EXPO_96_IDX 3
- { /* 3 */
- {
- .id = V4L2_CID_EXPOSURE,
- .type = V4L2_CTRL_TYPE_INTEGER,
- .name = "Exposure",
- .minimum = 0,
- .maximum = 3,
- .step = 1,
-#define EXPO_96_DEF 0
- .default_value = EXPO_96_DEF,
- },
- .set = sd_setexposure,
- .get = sd_getexposure,
- },
- { /* 4 */
- {
- .id = V4L2_CID_SHARPNESS,
- .type = V4L2_CTRL_TYPE_INTEGER,
- .name = "Sharpness",
- .minimum = -1, /* -1 = auto */
- .maximum = 4,
- .step = 1,
-#define SHARPNESS_96_DEF -1
- .default_value = SHARPNESS_96_DEF,
- },
- .set = sd_setsharpness,
- .get = sd_getsharpness,
- },
- { /* 5 */
- {
- .id = V4L2_CID_SATURATION,
- .type = V4L2_CTRL_TYPE_INTEGER,
- .name = "Saturation",
- .minimum = 0,
- .maximum = 4,
- .step = 1,
-#define SATUR_DEF 2
- .default_value = SATUR_DEF,
- },
- .set = sd_setsatur,
- .get = sd_getsatur,
- },
- {
- {
- .id = V4L2_CID_POWER_LINE_FREQUENCY,
- .type = V4L2_CTRL_TYPE_MENU,
- .name = "Light frequency filter",
- .minimum = 0,
- .maximum = 2, /* 0: 0, 1: 50Hz, 2:60Hz */
- .step = 1,
-#define FREQ_DEF 0
- .default_value = FREQ_DEF,
- },
- .set = sd_setfreq,
- .get = sd_getfreq,
- },
-};
static const struct v4l2_pix_format ov772x_mode[] = {
{320, 240, V4L2_PIX_FMT_YUYV, V4L2_FIELD_NONE,
@@ -392,35 +282,21 @@
.priv = 0},
};
-static const struct v4l2_pix_format ov965x_mode[] = {
- {320, 240, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
- .bytesperline = 320,
- .sizeimage = 320 * 240 * 3 / 8 + 590,
- .colorspace = V4L2_COLORSPACE_JPEG,
- .priv = 4},
- {640, 480, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
- .bytesperline = 640,
- .sizeimage = 640 * 480 * 3 / 8 + 590,
- .colorspace = V4L2_COLORSPACE_JPEG,
- .priv = 3},
- {800, 600, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
- .bytesperline = 800,
- .sizeimage = 800 * 600 * 3 / 8 + 590,
- .colorspace = V4L2_COLORSPACE_JPEG,
- .priv = 2},
- {1024, 768, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
- .bytesperline = 1024,
- .sizeimage = 1024 * 768 * 3 / 8 + 590,
- .colorspace = V4L2_COLORSPACE_JPEG,
- .priv = 1},
- {1280, 1024, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
- .bytesperline = 1280,
- .sizeimage = 1280 * 1024 * 3 / 8 + 590,
- .colorspace = V4L2_COLORSPACE_JPEG,
- .priv = 0},
+static const u8 qvga_rates[] = {125, 100, 75, 60, 50, 40, 30};
+static const u8 vga_rates[] = {60, 50, 40, 30, 15};
+
+static const struct framerates ov772x_framerates[] = {
+ { /* 320x240 */
+ .rates = qvga_rates,
+ .nrates = ARRAY_SIZE(qvga_rates),
+ },
+ { /* 640x480 */
+ .rates = vga_rates,
+ .nrates = ARRAY_SIZE(vga_rates),
+ },
};
-static const u8 bridge_init_ov772x[][2] = {
+static const u8 bridge_init[][2] = {
{ 0xc2, 0x0c },
{ 0x88, 0xf8 },
{ 0xc3, 0x69 },
@@ -478,7 +354,7 @@
{ 0xc1, 0x3c },
{ 0xc2, 0x0c },
};
-static const u8 sensor_init_ov772x[][2] = {
+static const u8 sensor_init[][2] = {
{ 0x12, 0x80 },
{ 0x11, 0x01 },
/*fixme: better have a delay?*/
@@ -571,7 +447,7 @@
{ 0x8e, 0x00 }, /* De-noise threshold */
{ 0x0c, 0xd0 }
};
-static const u8 bridge_start_ov772x_vga[][2] = {
+static const u8 bridge_start_vga[][2] = {
{0x1c, 0x00},
{0x1d, 0x40},
{0x1d, 0x02},
@@ -582,7 +458,7 @@
{0xc0, 0x50},
{0xc1, 0x3c},
};
-static const u8 sensor_start_ov772x_vga[][2] = {
+static const u8 sensor_start_vga[][2] = {
{0x12, 0x00},
{0x17, 0x26},
{0x18, 0xa0},
@@ -592,7 +468,7 @@
{0x2c, 0xf0},
{0x65, 0x20},
};
-static const u8 bridge_start_ov772x_qvga[][2] = {
+static const u8 bridge_start_qvga[][2] = {
{0x1c, 0x00},
{0x1d, 0x40},
{0x1d, 0x02},
@@ -603,7 +479,7 @@
{0xc0, 0x28},
{0xc1, 0x1e},
};
-static const u8 sensor_start_ov772x_qvga[][2] = {
+static const u8 sensor_start_qvga[][2] = {
{0x12, 0x40},
{0x17, 0x3f},
{0x18, 0x50},
@@ -614,571 +490,6 @@
{0x65, 0x2f},
};
-static const u8 bridge_init_ov965x[][2] = {
- {0x88, 0xf8},
- {0x89, 0xff},
- {0x76, 0x03},
- {0x92, 0x03},
- {0x95, 0x10},
- {0xe2, 0x00},
- {0xe7, 0x3e},
- {0x8d, 0x1c},
- {0x8e, 0x00},
- {0x8f, 0x00},
- {0x1f, 0x00},
- {0xc3, 0xf9},
- {0x89, 0xff},
- {0x88, 0xf8},
- {0x76, 0x03},
- {0x92, 0x01},
- {0x93, 0x18},
- {0x1c, 0x0a},
- {0x1d, 0x48},
- {0xc0, 0x50},
- {0xc1, 0x3c},
- {0x34, 0x05},
- {0xc2, 0x0c},
- {0xc3, 0xf9},
- {0x34, 0x05},
- {0xe7, 0x2e},
- {0x31, 0xf9},
- {0x35, 0x02},
- {0xd9, 0x10},
- {0x25, 0x42},
- {0x94, 0x11},
-};
-
-static const u8 sensor_init_ov965x[][2] = {
- {0x12, 0x80}, /* com7 - SSCB reset */
- {0x00, 0x00}, /* gain */
- {0x01, 0x80}, /* blue */
- {0x02, 0x80}, /* red */
- {0x03, 0x1b}, /* vref */
- {0x04, 0x03}, /* com1 - exposure low bits */
- {0x0b, 0x57}, /* ver */
- {0x0e, 0x61}, /* com5 */
- {0x0f, 0x42}, /* com6 */
- {0x11, 0x00}, /* clkrc */
- {0x12, 0x02}, /* com7 - 15fps VGA YUYV */
- {0x13, 0xe7}, /* com8 - everything (AGC, AWB and AEC) */
- {0x14, 0x28}, /* com9 */
- {0x16, 0x24}, /* reg16 */
- {0x17, 0x1d}, /* hstart*/
- {0x18, 0xbd}, /* hstop */
- {0x19, 0x01}, /* vstrt */
- {0x1a, 0x81}, /* vstop*/
- {0x1e, 0x04}, /* mvfp */
- {0x24, 0x3c}, /* aew */
- {0x25, 0x36}, /* aeb */
- {0x26, 0x71}, /* vpt */
- {0x27, 0x08}, /* bbias */
- {0x28, 0x08}, /* gbbias */
- {0x29, 0x15}, /* gr com */
- {0x2a, 0x00}, /* exhch */
- {0x2b, 0x00}, /* exhcl */
- {0x2c, 0x08}, /* rbias */
- {0x32, 0xff}, /* href */
- {0x33, 0x00}, /* chlf */
- {0x34, 0x3f}, /* aref1 */
- {0x35, 0x00}, /* aref2 */
- {0x36, 0xf8}, /* aref3 */
- {0x38, 0x72}, /* adc2 */
- {0x39, 0x57}, /* aref4 */
- {0x3a, 0x80}, /* tslb - yuyv */
- {0x3b, 0xc4}, /* com11 - night mode 1/4 frame rate */
- {0x3d, 0x99}, /* com13 */
- {0x3f, 0xc1}, /* edge */
- {0x40, 0xc0}, /* com15 */
- {0x41, 0x40}, /* com16 */
- {0x42, 0xc0}, /* com17 */
- {0x43, 0x0a}, /* rsvd */
- {0x44, 0xf0},
- {0x45, 0x46},
- {0x46, 0x62},
- {0x47, 0x2a},
- {0x48, 0x3c},
- {0x4a, 0xfc},
- {0x4b, 0xfc},
- {0x4c, 0x7f},
- {0x4d, 0x7f},
- {0x4e, 0x7f},
- {0x4f, 0x98}, /* matrix */
- {0x50, 0x98},
- {0x51, 0x00},
- {0x52, 0x28},
- {0x53, 0x70},
- {0x54, 0x98},
- {0x58, 0x1a}, /* matrix coef sign */
- {0x59, 0x85}, /* AWB control */
- {0x5a, 0xa9},
- {0x5b, 0x64},
- {0x5c, 0x84},
- {0x5d, 0x53},
- {0x5e, 0x0e},
- {0x5f, 0xf0}, /* AWB blue limit */
- {0x60, 0xf0}, /* AWB red limit */
- {0x61, 0xf0}, /* AWB green limit */
- {0x62, 0x00}, /* lcc1 */
- {0x63, 0x00}, /* lcc2 */
- {0x64, 0x02}, /* lcc3 */
- {0x65, 0x16}, /* lcc4 */
- {0x66, 0x01}, /* lcc5 */
- {0x69, 0x02}, /* hv */
- {0x6b, 0x5a}, /* dbvl */
- {0x6c, 0x04},
- {0x6d, 0x55},
- {0x6e, 0x00},
- {0x6f, 0x9d},
- {0x70, 0x21}, /* dnsth */
- {0x71, 0x78},
- {0x72, 0x00}, /* poidx */
- {0x73, 0x01}, /* pckdv */
- {0x74, 0x3a}, /* xindx */
- {0x75, 0x35}, /* yindx */
- {0x76, 0x01},
- {0x77, 0x02},
- {0x7a, 0x12}, /* gamma curve */
- {0x7b, 0x08},
- {0x7c, 0x16},
- {0x7d, 0x30},
- {0x7e, 0x5e},
- {0x7f, 0x72},
- {0x80, 0x82},
- {0x81, 0x8e},
- {0x82, 0x9a},
- {0x83, 0xa4},
- {0x84, 0xac},
- {0x85, 0xb8},
- {0x86, 0xc3},
- {0x87, 0xd6},
- {0x88, 0xe6},
- {0x89, 0xf2},
- {0x8a, 0x03},
- {0x8c, 0x89}, /* com19 */
- {0x14, 0x28}, /* com9 */
- {0x90, 0x7d},
- {0x91, 0x7b},
- {0x9d, 0x03}, /* lcc6 */
- {0x9e, 0x04}, /* lcc7 */
- {0x9f, 0x7a},
- {0xa0, 0x79},
- {0xa1, 0x40}, /* aechm */
- {0xa4, 0x50}, /* com21 */
- {0xa5, 0x68}, /* com26 */
- {0xa6, 0x4a}, /* AWB green */
- {0xa8, 0xc1}, /* refa8 */
- {0xa9, 0xef}, /* refa9 */
- {0xaa, 0x92},
- {0xab, 0x04},
- {0xac, 0x80}, /* black level control */
- {0xad, 0x80},
- {0xae, 0x80},
- {0xaf, 0x80},
- {0xb2, 0xf2},
- {0xb3, 0x20},
- {0xb4, 0x20}, /* ctrlb4 */
- {0xb5, 0x00},
- {0xb6, 0xaf},
- {0xbb, 0xae},
- {0xbc, 0x7f}, /* ADC channel offsets */
- {0xdb, 0x7f},
- {0xbe, 0x7f},
- {0xbf, 0x7f},
- {0xc0, 0xe2},
- {0xc1, 0xc0},
- {0xc2, 0x01},
- {0xc3, 0x4e},
- {0xc6, 0x85},
- {0xc7, 0x80}, /* com24 */
- {0xc9, 0xe0},
- {0xca, 0xe8},
- {0xcb, 0xf0},
- {0xcc, 0xd8},
- {0xcd, 0xf1},
- {0x4f, 0x98}, /* matrix */
- {0x50, 0x98},
- {0x51, 0x00},
- {0x52, 0x28},
- {0x53, 0x70},
- {0x54, 0x98},
- {0x58, 0x1a},
- {0xff, 0x41}, /* read 41, write ff 00 */
- {0x41, 0x40}, /* com16 */
-
- {0xc5, 0x03}, /* 60 Hz banding filter */
- {0x6a, 0x02}, /* 50 Hz banding filter */
-
- {0x12, 0x62}, /* com7 - 30fps VGA YUV */
- {0x36, 0xfa}, /* aref3 */
- {0x69, 0x0a}, /* hv */
- {0x8c, 0x89}, /* com22 */
- {0x14, 0x28}, /* com9 */
- {0x3e, 0x0c},
- {0x41, 0x40}, /* com16 */
- {0x72, 0x00},
- {0x73, 0x00},
- {0x74, 0x3a},
- {0x75, 0x35},
- {0x76, 0x01},
- {0xc7, 0x80},
- {0x03, 0x12}, /* vref */
- {0x17, 0x16}, /* hstart */
- {0x18, 0x02}, /* hstop */
- {0x19, 0x01}, /* vstrt */
- {0x1a, 0x3d}, /* vstop */
- {0x32, 0xff}, /* href */
- {0xc0, 0xaa},
-};
-
-static const u8 bridge_init_ov965x_2[][2] = {
- {0x94, 0xaa},
- {0xf1, 0x60},
- {0xe5, 0x04},
- {0xc0, 0x50},
- {0xc1, 0x3c},
- {0x8c, 0x00},
- {0x8d, 0x1c},
- {0x34, 0x05},
-
- {0xc2, 0x0c},
- {0xc3, 0xf9},
- {0xda, 0x01},
- {0x50, 0x00},
- {0x51, 0xa0},
- {0x52, 0x3c},
- {0x53, 0x00},
- {0x54, 0x00},
- {0x55, 0x00},
- {0x57, 0x00},
- {0x5c, 0x00},
- {0x5a, 0xa0},
- {0x5b, 0x78},
- {0x35, 0x02},
- {0xd9, 0x10},
- {0x94, 0x11},
-};
-
-static const u8 sensor_init_ov965x_2[][2] = {
- {0x3b, 0xc4},
- {0x1e, 0x04}, /* mvfp */
- {0x13, 0xe0}, /* com8 */
- {0x00, 0x00}, /* gain */
- {0x13, 0xe7}, /* com8 - everything (AGC, AWB and AEC) */
- {0x11, 0x03}, /* clkrc */
- {0x6b, 0x5a}, /* dblv */
- {0x6a, 0x05},
- {0xc5, 0x07},
- {0xa2, 0x4b},
- {0xa3, 0x3e},
- {0x2d, 0x00},
- {0xff, 0x42}, /* read 42, write ff 00 */
- {0x42, 0xc0}, /* com17 */
- {0x2d, 0x00},
- {0xff, 0x42}, /* read 42, write ff 00 */
- {0x42, 0xc1}, /* com17 */
-/* sharpness */
- {0x3f, 0x01},
- {0xff, 0x42}, /* read 42, write ff 00 */
- {0x42, 0xc1}, /* com17 */
-/* saturation */
- {0x4f, 0x98}, /* matrix */
- {0x50, 0x98},
- {0x51, 0x00},
- {0x52, 0x28},
- {0x53, 0x70},
- {0x54, 0x98},
- {0x58, 0x1a},
- {0xff, 0x41}, /* read 41, write ff 00 */
- {0x41, 0x40}, /* com16 */
-/* contrast */
- {0x56, 0x40},
-/* brightness */
- {0x55, 0x8f},
-/* expo */
- {0x10, 0x25}, /* aech - exposure high bits */
- {0xff, 0x13}, /* read 13, write ff 00 */
- {0x13, 0xe7}, /* com8 - everything (AGC, AWB and AEC) */
-};
-
-static const u8 sensor_start_ov965x_1_vga[][2] = { /* same for qvga */
- {0x12, 0x62}, /* com7 - 30fps VGA YUV */
- {0x36, 0xfa}, /* aref3 */
- {0x69, 0x0a}, /* hv */
- {0x8c, 0x89}, /* com22 */
- {0x14, 0x28}, /* com9 */
- {0x3e, 0x0c}, /* com14 */
- {0x41, 0x40}, /* com16 */
- {0x72, 0x00},
- {0x73, 0x00},
- {0x74, 0x3a},
- {0x75, 0x35},
- {0x76, 0x01},
- {0xc7, 0x80}, /* com24 */
- {0x03, 0x12}, /* vref */
- {0x17, 0x16}, /* hstart */
- {0x18, 0x02}, /* hstop */
- {0x19, 0x01}, /* vstrt */
- {0x1a, 0x3d}, /* vstop */
- {0x32, 0xff}, /* href */
- {0xc0, 0xaa},
-};
-
-static const u8 sensor_start_ov965x_1_svga[][2] = {
- {0x12, 0x02}, /* com7 - YUYV - VGA 15 full resolution */
- {0x36, 0xf8}, /* aref3 */
- {0x69, 0x02}, /* hv */
- {0x8c, 0x0d}, /* com22 */
- {0x3e, 0x0c}, /* com14 */
- {0x41, 0x40}, /* com16 */
- {0x72, 0x00},
- {0x73, 0x01},
- {0x74, 0x3a},
- {0x75, 0x35},
- {0x76, 0x01},
- {0xc7, 0x80}, /* com24 */
- {0x03, 0x1b}, /* vref */
- {0x17, 0x1d}, /* hstart */
- {0x18, 0xbd}, /* hstop */
- {0x19, 0x01}, /* vstrt */
- {0x1a, 0x81}, /* vstop */
- {0x32, 0xff}, /* href */
- {0xc0, 0xe2},
-};
-
-static const u8 sensor_start_ov965x_1_xga[][2] = {
- {0x12, 0x02}, /* com7 */
- {0x36, 0xf8}, /* aref3 */
- {0x69, 0x02}, /* hv */
- {0x8c, 0x89}, /* com22 */
- {0x14, 0x28}, /* com9 */
- {0x3e, 0x0c}, /* com14 */
- {0x41, 0x40}, /* com16 */
- {0x72, 0x00},
- {0x73, 0x01},
- {0x74, 0x3a},
- {0x75, 0x35},
- {0x76, 0x01},
- {0xc7, 0x80}, /* com24 */
- {0x03, 0x1b}, /* vref */
- {0x17, 0x1d}, /* hstart */
- {0x18, 0xbd}, /* hstop */
- {0x19, 0x01}, /* vstrt */
- {0x1a, 0x81}, /* vstop */
- {0x32, 0xff}, /* href */
- {0xc0, 0xe2},
-};
-
-static const u8 sensor_start_ov965x_1_sxga[][2] = {
- {0x12, 0x02}, /* com7 */
- {0x36, 0xf8}, /* aref3 */
- {0x69, 0x02}, /* hv */
- {0x8c, 0x89}, /* com22 */
- {0x14, 0x28}, /* com9 */
- {0x3e, 0x0c}, /* com14 */
- {0x41, 0x40}, /* com16 */
- {0x72, 0x00},
- {0x73, 0x01},
- {0x74, 0x3a},
- {0x75, 0x35},
- {0x76, 0x01},
- {0xc7, 0x80}, /* com24 */
- {0x03, 0x1b}, /* vref */
- {0x17, 0x1d}, /* hstart */
- {0x18, 0x02}, /* hstop */
- {0x19, 0x01}, /* vstrt */
- {0x1a, 0x81}, /* vstop */
- {0x32, 0xff}, /* href */
- {0xc0, 0xe2},
-};
-
-static const u8 bridge_start_ov965x_qvga[][2] = {
- {0x94, 0xaa},
- {0xf1, 0x60},
- {0xe5, 0x04},
- {0xc0, 0x50},
- {0xc1, 0x3c},
- {0x8c, 0x00},
- {0x8d, 0x1c},
- {0x34, 0x05},
-
- {0xc2, 0x4c},
- {0xc3, 0xf9},
- {0xda, 0x00},
- {0x50, 0x00},
- {0x51, 0xa0},
- {0x52, 0x78},
- {0x53, 0x00},
- {0x54, 0x00},
- {0x55, 0x00},
- {0x57, 0x00},
- {0x5c, 0x00},
- {0x5a, 0x50},
- {0x5b, 0x3c},
- {0x35, 0x02},
- {0xd9, 0x10},
- {0x94, 0x11},
-};
-
-static const u8 bridge_start_ov965x_vga[][2] = {
- {0x94, 0xaa},
- {0xf1, 0x60},
- {0xe5, 0x04},
- {0xc0, 0x50},
- {0xc1, 0x3c},
- {0x8c, 0x00},
- {0x8d, 0x1c},
- {0x34, 0x05},
- {0xc2, 0x0c},
- {0xc3, 0xf9},
- {0xda, 0x01},
- {0x50, 0x00},
- {0x51, 0xa0},
- {0x52, 0x3c},
- {0x53, 0x00},
- {0x54, 0x00},
- {0x55, 0x00},
- {0x57, 0x00},
- {0x5c, 0x00},
- {0x5a, 0xa0},
- {0x5b, 0x78},
- {0x35, 0x02},
- {0xd9, 0x10},
- {0x94, 0x11},
-};
-
-static const u8 bridge_start_ov965x_svga[][2] = {
- {0x94, 0xaa},
- {0xf1, 0x60},
- {0xe5, 0x04},
- {0xc0, 0xa0},
- {0xc1, 0x80},
- {0x8c, 0x00},
- {0x8d, 0x1c},
- {0x34, 0x05},
- {0xc2, 0x4c},
- {0xc3, 0xf9},
- {0x50, 0x00},
- {0x51, 0x40},
- {0x52, 0x00},
- {0x53, 0x00},
- {0x54, 0x00},
- {0x55, 0x88},
- {0x57, 0x00},
- {0x5c, 0x00},
- {0x5a, 0xc8},
- {0x5b, 0x96},
- {0x35, 0x02},
- {0xd9, 0x10},
- {0xda, 0x00},
- {0x94, 0x11},
-};
-
-static const u8 bridge_start_ov965x_xga[][2] = {
- {0x94, 0xaa},
- {0xf1, 0x60},
- {0xe5, 0x04},
- {0xc0, 0xa0},
- {0xc1, 0x80},
- {0x8c, 0x00},
- {0x8d, 0x1c},
- {0x34, 0x05},
- {0xc2, 0x4c},
- {0xc3, 0xf9},
- {0x50, 0x00},
- {0x51, 0x40},
- {0x52, 0x00},
- {0x53, 0x00},
- {0x54, 0x00},
- {0x55, 0x88},
- {0x57, 0x00},
- {0x5c, 0x01},
- {0x5a, 0x00},
- {0x5b, 0xc0},
- {0x35, 0x02},
- {0xd9, 0x10},
- {0xda, 0x01},
- {0x94, 0x11},
-};
-
-static const u8 bridge_start_ov965x_sxga[][2] = {
- {0x94, 0xaa},
- {0xf1, 0x60},
- {0xe5, 0x04},
- {0xc0, 0xa0},
- {0xc1, 0x80},
- {0x8c, 0x00},
- {0x8d, 0x1c},
- {0x34, 0x05},
- {0xc2, 0x0c},
- {0xc3, 0xf9},
- {0xda, 0x00},
- {0x35, 0x02},
- {0xd9, 0x10},
- {0x94, 0x11},
-};
-
-static const u8 sensor_start_ov965x_2_qvga[][2] = {
- {0x3b, 0xe4}, /* com11 - night mode 1/4 frame rate */
- {0x1e, 0x04}, /* mvfp */
- {0x13, 0xe0}, /* com8 */
- {0x00, 0x00},
- {0x13, 0xe7}, /* com8 - everything (AGC, AWB and AEC) */
- {0x11, 0x01}, /* clkrc */
- {0x6b, 0x5a}, /* dblv */
- {0x6a, 0x02}, /* 50 Hz banding filter */
- {0xc5, 0x03}, /* 60 Hz banding filter */
- {0xa2, 0x96}, /* bd50 */
- {0xa3, 0x7d}, /* bd60 */
-
- {0xff, 0x13}, /* read 13, write ff 00 */
- {0x13, 0xe7},
- {0x3a, 0x80}, /* tslb - yuyv */
-};
-
-static const u8 sensor_start_ov965x_2_vga[][2] = {
- {0x3b, 0xc4}, /* com11 - night mode 1/4 frame rate */
- {0x1e, 0x04}, /* mvfp */
- {0x13, 0xe0}, /* com8 */
- {0x00, 0x00},
- {0x13, 0xe7}, /* com8 - everything (AGC, AWB and AEC) */
- {0x11, 0x03}, /* clkrc */
- {0x6b, 0x5a}, /* dblv */
- {0x6a, 0x05}, /* 50 Hz banding filter */
- {0xc5, 0x07}, /* 60 Hz banding filter */
- {0xa2, 0x4b}, /* bd50 */
- {0xa3, 0x3e}, /* bd60 */
-
- {0x2d, 0x00}, /* advfl */
-};
-
-static const u8 sensor_start_ov965x_2_svga[][2] = { /* same for xga */
- {0x3b, 0xc4}, /* com11 - night mode 1/4 frame rate */
- {0x1e, 0x04}, /* mvfp */
- {0x13, 0xe0}, /* com8 */
- {0x00, 0x00},
- {0x13, 0xe7}, /* com8 - everything (AGC, AWB and AEC) */
- {0x11, 0x01}, /* clkrc */
- {0x6b, 0x5a}, /* dblv */
- {0x6a, 0x0c}, /* 50 Hz banding filter */
- {0xc5, 0x0f}, /* 60 Hz banding filter */
- {0xa2, 0x4e}, /* bd50 */
- {0xa3, 0x41}, /* bd60 */
-};
-
-static const u8 sensor_start_ov965x_2_sxga[][2] = {
- {0x13, 0xe0}, /* com8 */
- {0x00, 0x00},
- {0x13, 0xe7}, /* com8 - everything (AGC, AWB and AEC) */
- {0x3b, 0xc4}, /* com11 - night mode 1/4 frame rate */
- {0x1e, 0x04}, /* mvfp */
- {0x11, 0x01}, /* clkrc */
- {0x6b, 0x5a}, /* dblv */
- {0x6a, 0x0c}, /* 50 Hz banding filter */
- {0xc5, 0x0f}, /* 60 Hz banding filter */
- {0xa2, 0x4e}, /* bd50 */
- {0xa3, 0x41}, /* bd60 */
-};
-
static void ov534_reg_write(struct gspca_dev *gspca_dev, u16 reg, u8 val)
{
struct usb_device *udev = gspca_dev->dev;
@@ -1360,14 +671,14 @@
PDEBUG(D_PROBE, "frame_rate: %d", r->fps);
}
-static void setbrightness_77(struct gspca_dev *gspca_dev)
+static void setbrightness(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
sccb_reg_write(gspca_dev, 0x9B, sd->brightness);
}
-static void setcontrast_77(struct gspca_dev *gspca_dev)
+static void setcontrast(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
@@ -1401,7 +712,7 @@
sccb_reg_write(gspca_dev, 0x00, val);
}
-static void setexposure_77(struct gspca_dev *gspca_dev)
+static void setexposure(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
u8 val;
@@ -1432,7 +743,7 @@
sccb_reg_write(gspca_dev, 0x01, sd->hue);
}
-static void setautogain_77(struct gspca_dev *gspca_dev)
+static void setautogain(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
@@ -1457,7 +768,7 @@
sccb_reg_write(gspca_dev, 0x63, 0xaa); /* AWB off */
}
-static void setsharpness_77(struct gspca_dev *gspca_dev)
+static void setsharpness(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
u8 val;
@@ -1491,132 +802,6 @@
sccb_reg_read(gspca_dev, 0x0c) & 0x7f);
}
-/* ov965x specific controls */
-static void setbrightness_96(struct gspca_dev *gspca_dev)
-{
- struct sd *sd = (struct sd *) gspca_dev;
- u8 val;
-
- val = sd->brightness;
- if (val < 8)
- val = 15 - val; /* f .. 8 */
- else
- val = val - 8; /* 0 .. 7 */
- sccb_reg_write(gspca_dev, 0x55, /* brtn - brightness adjustment */
- 0x0f | (val << 4));
-}
-
-static void setcontrast_96(struct gspca_dev *gspca_dev)
-{
- struct sd *sd = (struct sd *) gspca_dev;
-
- sccb_reg_write(gspca_dev, 0x56, /* cnst1 - contrast 1 ctrl coeff */
- sd->contrast << 4);
-}
-
-static void setexposure_96(struct gspca_dev *gspca_dev)
-{
- struct sd *sd = (struct sd *) gspca_dev;
- u8 val;
- static const u8 expo[4] = {0x00, 0x25, 0x38, 0x5e};
-
- sccb_reg_write(gspca_dev, 0x10, /* aec[9:2] */
- expo[sd->exposure]);
- val = sccb_reg_read(gspca_dev, 0x13); /* com8 */
- sccb_reg_write(gspca_dev, 0xff, 0x00);
- sccb_reg_write(gspca_dev, 0x13, val);
- val = sccb_reg_read(gspca_dev, 0xa1); /* aech */
- sccb_reg_write(gspca_dev, 0xff, 0x00);
- sccb_reg_write(gspca_dev, 0xa1, val & 0xe0); /* aec[15:10] = 0 */
-}
-
-static void setsharpness_96(struct gspca_dev *gspca_dev)
-{
- struct sd *sd = (struct sd *) gspca_dev;
- s8 val;
-
- val = sd->sharpness;
- if (val < 0) { /* auto */
- val = sccb_reg_read(gspca_dev, 0x42); /* com17 */
- sccb_reg_write(gspca_dev, 0xff, 0x00);
- sccb_reg_write(gspca_dev, 0x42, val | 0x40);
- /* Edge enhancement strength auto adjust */
- return;
- }
- if (val != 0)
- val = 1 << (val - 1);
- sccb_reg_write(gspca_dev, 0x3f, /* edge - edge enhance. factor */
- val);
- val = sccb_reg_read(gspca_dev, 0x42); /* com17 */
- sccb_reg_write(gspca_dev, 0xff, 0x00);
- sccb_reg_write(gspca_dev, 0x42, val & 0xbf);
-}
-
-static void setautogain_96(struct gspca_dev *gspca_dev)
-{
- struct sd *sd = (struct sd *) gspca_dev;
- u8 val;
-
-/*fixme: should adjust agc/awb/aec by different controls */
- val = sd->autogain;
- val = sccb_reg_read(gspca_dev, 0x13); /* com8 */
- sccb_reg_write(gspca_dev, 0xff, 0x00);
- if (sd->autogain)
- val |= 0x05; /* agc & aec */
- else
- val &= 0xfa;
- sccb_reg_write(gspca_dev, 0x13, val);
-}
-
-static void setsatur(struct gspca_dev *gspca_dev)
-{
- struct sd *sd = (struct sd *) gspca_dev;
- u8 val1, val2, val3;
- static const u8 matrix[5][2] = {
- {0x14, 0x38},
- {0x1e, 0x54},
- {0x28, 0x70},
- {0x32, 0x8c},
- {0x48, 0x90}
- };
-
- val1 = matrix[sd->satur][0];
- val2 = matrix[sd->satur][1];
- val3 = val1 + val2;
- sccb_reg_write(gspca_dev, 0x4f, val3); /* matrix coeff */
- sccb_reg_write(gspca_dev, 0x50, val3);
- sccb_reg_write(gspca_dev, 0x51, 0x00);
- sccb_reg_write(gspca_dev, 0x52, val1);
- sccb_reg_write(gspca_dev, 0x53, val2);
- sccb_reg_write(gspca_dev, 0x54, val3);
- sccb_reg_write(gspca_dev, 0x58, 0x1a); /* mtxs - coeff signs */
- val1 = sccb_reg_read(gspca_dev, 0x41); /* com16 */
- sccb_reg_write(gspca_dev, 0xff, 0x00);
- sccb_reg_write(gspca_dev, 0x41, val1);
-}
-
-static void setfreq(struct gspca_dev *gspca_dev)
-{
- struct sd *sd = (struct sd *) gspca_dev;
- u8 val;
-
- val = sccb_reg_read(gspca_dev, 0x13); /* com8 */
- sccb_reg_write(gspca_dev, 0xff, 0x00);
- if (sd->lightfreq == 0) {
- sccb_reg_write(gspca_dev, 0x13, val & 0xdf);
- return;
- }
- sccb_reg_write(gspca_dev, 0x13, val | 0x20);
-
- val = sccb_reg_read(gspca_dev, 0x42); /* com17 */
- sccb_reg_write(gspca_dev, 0xff, 0x00);
- if (sd->lightfreq == 1)
- val |= 0x01;
- else
- val &= 0xfe;
- sccb_reg_write(gspca_dev, 0x42, val);
-}
-
/* this function is called at probe time */
static int sd_config(struct gspca_dev *gspca_dev,
const struct usb_device_id *id)
@@ -1624,77 +809,50 @@
struct sd *sd = (struct sd *) gspca_dev;
struct cam *cam;
- sd->sensor = id->driver_info;
-
cam = &gspca_dev->cam;
- if (sd->sensor == SENSOR_OV772X) {
- cam->cam_mode = ov772x_mode;
- cam->nmodes = ARRAY_SIZE(ov772x_mode);
+ cam->cam_mode = ov772x_mode;
+ cam->nmodes = ARRAY_SIZE(ov772x_mode);
+ cam->mode_framerates = ov772x_framerates;
- cam->bulk = 1;
- cam->bulk_size = 16384;
- cam->bulk_nurbs = 2;
- } else { /* ov965x */
- cam->cam_mode = ov965x_mode;
- cam->nmodes = ARRAY_SIZE(ov965x_mode);
- }
+ cam->bulk = 1;
+ cam->bulk_size = 16384;
+ cam->bulk_nurbs = 2;
sd->frame_rate = 30;
- if (sd->sensor == SENSOR_OV772X) {
- sd->brightness = BRIGHTNESS_77_DEF;
- sd->contrast = CONTRAST_77_DEF;
- sd->gain = GAIN_DEF;
- sd->exposure = EXPO_77_DEF;
- sd->redblc = RED_BALANCE_DEF;
- sd->blueblc = BLUE_BALANCE_DEF;
- sd->hue = HUE_DEF;
-#if AUTOGAIN_77_DEF != 0
- sd->autogain = AUTOGAIN_77_DEF;
+ sd->brightness = BRIGHTNESS_DEF;
+ sd->contrast = CONTRAST_DEF;
+ sd->gain = GAIN_DEF;
+ sd->exposure = EXPO_DEF;
+ sd->redblc = RED_BALANCE_DEF;
+ sd->blueblc = BLUE_BALANCE_DEF;
+ sd->hue = HUE_DEF;
+#if AUTOGAIN_DEF != 0
+ sd->autogain = AUTOGAIN_DEF;
#else
- gspca_dev->ctrl_inac |= (1 << AWB_77_IDX);
+ gspca_dev->ctrl_inac |= (1 << AWB_IDX);
#endif
#if AWB_DEF != 0
- sd->awb = AWB_DEF
+ sd->awb = AWB_DEF
#endif
-#if SHARPNESS_77_DEF != 0
- sd->sharpness = SHARPNESS_77_DEF;
+#if SHARPNESS_DEF != 0
+ sd->sharpness = SHARPNESS_DEF;
#endif
#if HFLIP_DEF != 0
- sd->hflip = HFLIP_DEF;
+ sd->hflip = HFLIP_DEF;
#endif
#if VFLIP_DEF != 0
- sd->vflip = VFLIP_DEF;
+ sd->vflip = VFLIP_DEF;
#endif
- } else {
- sd->brightness = BRIGHTNESS_96_DEF;
- sd->contrast = CONTRAST_96_DEF;
-#if AUTOGAIN_96_DEF != 0
- sd->autogain = AUTOGAIN_96_DEF;
- gspca_dev->ctrl_inac |= (1 << EXPO_96_IDX);
-#endif
-#if EXPO_96_DEF != 0
- sd->exposure = EXPO_96_DEF;
-#endif
-#if SHARPNESS_96_DEF != 0
- sd->sharpness = SHARPNESS_96_DEF;
-#endif
- sd->satur = SATUR_DEF;
- sd->lightfreq = FREQ_DEF;
- }
+
return 0;
}
/* this function is called at probe and resume time */
static int sd_init(struct gspca_dev *gspca_dev)
{
- struct sd *sd = (struct sd *) gspca_dev;
u16 sensor_id;
- static const u8 sensor_addr[2] = {
- 0x42, /* 0 SENSOR_OV772X */
- 0x60, /* 1 SENSOR_OV965X */
- };
/* reset bridge */
ov534_reg_write(gspca_dev, 0xe7, 0x3a);
@@ -1702,8 +860,7 @@
msleep(100);
/* initialize the sensor address */
- ov534_reg_write(gspca_dev, OV534_REG_ADDRESS,
- sensor_addr[sd->sensor]);
+ ov534_reg_write(gspca_dev, OV534_REG_ADDRESS, 0x42);
/* reset sensor */
sccb_reg_write(gspca_dev, 0x12, 0x80);
@@ -1717,64 +874,46 @@
PDEBUG(D_PROBE, "Sensor ID: %04x", sensor_id);
/* initialize */
- switch (sd->sensor) {
- case SENSOR_OV772X:
- reg_w_array(gspca_dev, bridge_init_ov772x,
- ARRAY_SIZE(bridge_init_ov772x));
- ov534_set_led(gspca_dev, 1);
- sccb_w_array(gspca_dev, sensor_init_ov772x,
- ARRAY_SIZE(sensor_init_ov772x));
- ov534_reg_write(gspca_dev, 0xe0, 0x09);
- ov534_set_led(gspca_dev, 0);
- set_frame_rate(gspca_dev);
- break;
- default:
-/* case SENSOR_OV965X: */
- reg_w_array(gspca_dev, bridge_init_ov965x,
- ARRAY_SIZE(bridge_init_ov965x));
- sccb_w_array(gspca_dev, sensor_init_ov965x,
- ARRAY_SIZE(sensor_init_ov965x));
- reg_w_array(gspca_dev, bridge_init_ov965x_2,
- ARRAY_SIZE(bridge_init_ov965x_2));
- sccb_w_array(gspca_dev, sensor_init_ov965x_2,
- ARRAY_SIZE(sensor_init_ov965x_2));
- ov534_reg_write(gspca_dev, 0xe0, 0x00);
- ov534_reg_write(gspca_dev, 0xe0, 0x01);
- ov534_set_led(gspca_dev, 0);
- ov534_reg_write(gspca_dev, 0xe0, 0x00);
- }
+ reg_w_array(gspca_dev, bridge_init,
+ ARRAY_SIZE(bridge_init));
+ ov534_set_led(gspca_dev, 1);
+ sccb_w_array(gspca_dev, sensor_init,
+ ARRAY_SIZE(sensor_init));
+ ov534_reg_write(gspca_dev, 0xe0, 0x09);
+ ov534_set_led(gspca_dev, 0);
+ set_frame_rate(gspca_dev);
return 0;
}
-static int sd_start_ov772x(struct gspca_dev *gspca_dev)
+static int sd_start(struct gspca_dev *gspca_dev)
{
int mode;
mode = gspca_dev->cam.cam_mode[gspca_dev->curr_mode].priv;
if (mode != 0) { /* 320x240 */
- reg_w_array(gspca_dev, bridge_start_ov772x_qvga,
- ARRAY_SIZE(bridge_start_ov772x_qvga));
- sccb_w_array(gspca_dev, sensor_start_ov772x_qvga,
- ARRAY_SIZE(sensor_start_ov772x_qvga));
+ reg_w_array(gspca_dev, bridge_start_qvga,
+ ARRAY_SIZE(bridge_start_qvga));
+ sccb_w_array(gspca_dev, sensor_start_qvga,
+ ARRAY_SIZE(sensor_start_qvga));
} else { /* 640x480 */
- reg_w_array(gspca_dev, bridge_start_ov772x_vga,
- ARRAY_SIZE(bridge_start_ov772x_vga));
- sccb_w_array(gspca_dev, sensor_start_ov772x_vga,
- ARRAY_SIZE(sensor_start_ov772x_vga));
+ reg_w_array(gspca_dev, bridge_start_vga,
+ ARRAY_SIZE(bridge_start_vga));
+ sccb_w_array(gspca_dev, sensor_start_vga,
+ ARRAY_SIZE(sensor_start_vga));
}
set_frame_rate(gspca_dev);
- setautogain_77(gspca_dev);
+ setautogain(gspca_dev);
setawb(gspca_dev);
setgain(gspca_dev);
setredblc(gspca_dev);
setblueblc(gspca_dev);
sethue(gspca_dev);
- setexposure_77(gspca_dev);
- setbrightness_77(gspca_dev);
- setcontrast_77(gspca_dev);
- setsharpness_77(gspca_dev);
+ setexposure(gspca_dev);
+ setbrightness(gspca_dev);
+ setcontrast(gspca_dev);
+ setsharpness(gspca_dev);
setvflip(gspca_dev);
sethflip(gspca_dev);
@@ -1783,81 +922,12 @@
return 0;
}
-static int sd_start_ov965x(struct gspca_dev *gspca_dev)
-{
- int mode;
-
- mode = gspca_dev->cam.cam_mode[gspca_dev->curr_mode].priv;
- switch (mode) {
- default:
-/* case 4: * 320x240 */
- sccb_w_array(gspca_dev, sensor_start_ov965x_1_vga,
- ARRAY_SIZE(sensor_start_ov965x_1_vga));
- reg_w_array(gspca_dev, bridge_start_ov965x_qvga,
- ARRAY_SIZE(bridge_start_ov965x_qvga));
- sccb_w_array(gspca_dev, sensor_start_ov965x_2_qvga,
- ARRAY_SIZE(sensor_start_ov965x_2_qvga));
- break;
- case 3: /* 640x480 */
- sccb_w_array(gspca_dev, sensor_start_ov965x_1_vga,
- ARRAY_SIZE(sensor_start_ov965x_1_vga));
- reg_w_array(gspca_dev, bridge_start_ov965x_vga,
- ARRAY_SIZE(bridge_start_ov965x_vga));
- sccb_w_array(gspca_dev, sensor_start_ov965x_2_vga,
- ARRAY_SIZE(sensor_start_ov965x_2_vga));
- break;
- case 2: /* 800x600 */
- sccb_w_array(gspca_dev, sensor_start_ov965x_1_svga,
- ARRAY_SIZE(sensor_start_ov965x_1_svga));
- reg_w_array(gspca_dev, bridge_start_ov965x_svga,
- ARRAY_SIZE(bridge_start_ov965x_svga));
- sccb_w_array(gspca_dev, sensor_start_ov965x_2_svga,
- ARRAY_SIZE(sensor_start_ov965x_2_svga));
- break;
- case 1: /* 1024x768 */
- sccb_w_array(gspca_dev, sensor_start_ov965x_1_xga,
- ARRAY_SIZE(sensor_start_ov965x_1_xga));
- reg_w_array(gspca_dev, bridge_start_ov965x_xga,
- ARRAY_SIZE(bridge_start_ov965x_xga));
- sccb_w_array(gspca_dev, sensor_start_ov965x_2_svga,
- ARRAY_SIZE(sensor_start_ov965x_2_svga));
- break;
- case 0: /* 1280x1024 */
- sccb_w_array(gspca_dev, sensor_start_ov965x_1_sxga,
- ARRAY_SIZE(sensor_start_ov965x_1_sxga));
- reg_w_array(gspca_dev, bridge_start_ov965x_sxga,
- ARRAY_SIZE(bridge_start_ov965x_sxga));
- sccb_w_array(gspca_dev, sensor_start_ov965x_2_sxga,
- ARRAY_SIZE(sensor_start_ov965x_2_sxga));
- break;
- }
- setfreq(gspca_dev);
- setautogain_96(gspca_dev);
- setbrightness_96(gspca_dev);
- setcontrast_96(gspca_dev);
- setexposure_96(gspca_dev);
- setsharpness_96(gspca_dev);
- setsatur(gspca_dev);
-
- ov534_reg_write(gspca_dev, 0xe0, 0x00);
- ov534_reg_write(gspca_dev, 0xe0, 0x00);
- ov534_set_led(gspca_dev, 1);
- return 0;
-}
-
-static void sd_stopN_ov772x(struct gspca_dev *gspca_dev)
+static void sd_stopN(struct gspca_dev *gspca_dev)
{
ov534_reg_write(gspca_dev, 0xe0, 0x09);
ov534_set_led(gspca_dev, 0);
}
-static void sd_stopN_ov965x(struct gspca_dev *gspca_dev)
-{
- ov534_reg_write(gspca_dev, 0xe0, 0x01);
- ov534_set_led(gspca_dev, 0);
- ov534_reg_write(gspca_dev, 0xe0, 0x00);
-}
-
/* Values for bmHeaderInfo (Video and Still Image Payload Headers, 2.4.3.3) */
#define UVC_STREAM_EOH (1 << 7)
#define UVC_STREAM_ERR (1 << 6)
@@ -1875,11 +945,9 @@
__u32 this_pts;
u16 this_fid;
int remaining_len = len;
- int payload_len;
- payload_len = gspca_dev->cam.bulk ? 2048 : 2040;
do {
- len = min(remaining_len, payload_len);
+ len = min(remaining_len, 2048);
/* Payloads are prefixed with a UVC-style header. We
consider a frame to start when the FID toggles, or the PTS
@@ -1918,7 +986,17 @@
data + 12, len - 12);
/* If this packet is marked as EOF, end the frame */
} else if (data[1] & UVC_STREAM_EOF) {
+ struct gspca_frame *frame;
+
sd->last_pts = 0;
+ frame = gspca_get_i_frame(gspca_dev);
+ if (frame == NULL)
+ goto discard;
+ if (frame->data_end - frame->data + (len - 12) !=
+ gspca_dev->width * gspca_dev->height * 2) {
+ PDEBUG(D_PACK, "wrong sized frame");
+ goto discard;
+ }
gspca_frame_add(gspca_dev, LAST_PACKET,
data + 12, len - 12);
} else {
@@ -1965,12 +1043,8 @@
struct sd *sd = (struct sd *) gspca_dev;
sd->exposure = val;
- if (gspca_dev->streaming) {
- if (sd->sensor == SENSOR_OV772X)
- setexposure_77(gspca_dev);
- else
- setexposure_96(gspca_dev);
- }
+ if (gspca_dev->streaming)
+ setexposure(gspca_dev);
return 0;
}
@@ -1987,12 +1061,8 @@
struct sd *sd = (struct sd *) gspca_dev;
sd->brightness = val;
- if (gspca_dev->streaming) {
- if (sd->sensor == SENSOR_OV772X)
- setbrightness_77(gspca_dev);
- else
- setbrightness_96(gspca_dev);
- }
+ if (gspca_dev->streaming)
+ setbrightness(gspca_dev);
return 0;
}
@@ -2009,12 +1079,8 @@
struct sd *sd = (struct sd *) gspca_dev;
sd->contrast = val;
- if (gspca_dev->streaming) {
- if (sd->sensor == SENSOR_OV772X)
- setcontrast_77(gspca_dev);
- else
- setcontrast_96(gspca_dev);
- }
+ if (gspca_dev->streaming)
+ setcontrast(gspca_dev);
return 0;
}
@@ -2026,41 +1092,6 @@
return 0;
}
-static int sd_setsatur(struct gspca_dev *gspca_dev, __s32 val)
-{
- struct sd *sd = (struct sd *) gspca_dev;
-
- sd->satur = val;
- if (gspca_dev->streaming)
- setsatur(gspca_dev);
- return 0;
-}
-
-static int sd_getsatur(struct gspca_dev *gspca_dev, __s32 *val)
-{
- struct sd *sd = (struct sd *) gspca_dev;
-
- *val = sd->satur;
- return 0;
-}
-static int sd_setfreq(struct gspca_dev *gspca_dev, __s32 val)
-{
- struct sd *sd = (struct sd *) gspca_dev;
-
- sd->lightfreq = val;
- if (gspca_dev->streaming)
- setfreq(gspca_dev);
- return 0;
-}
-
-static int sd_getfreq(struct gspca_dev *gspca_dev, __s32 *val)
-{
- struct sd *sd = (struct sd *) gspca_dev;
-
- *val = sd->lightfreq;
- return 0;
-}
-
static int sd_setredblc(struct gspca_dev *gspca_dev, __s32 val)
{
struct sd *sd = (struct sd *) gspca_dev;
@@ -2122,22 +1153,14 @@
sd->autogain = val;
if (gspca_dev->streaming) {
- if (sd->sensor == SENSOR_OV772X) {
- /* the auto white balance control works only
- * when auto gain is set */
- if (val)
- gspca_dev->ctrl_inac &= ~(1 << AWB_77_IDX);
- else
- gspca_dev->ctrl_inac |= (1 << AWB_77_IDX);
- setautogain_77(gspca_dev);
- } else {
- if (val)
- gspca_dev->ctrl_inac |= (1 << EXPO_96_IDX);
- else
- gspca_dev->ctrl_inac &= ~(1 << EXPO_96_IDX);
- setautogain_96(gspca_dev);
- }
+ /* the auto white balance control works only
+ * when auto gain is set */
+ if (val)
+ gspca_dev->ctrl_inac &= ~(1 << AWB_IDX);
+ else
+ gspca_dev->ctrl_inac |= (1 << AWB_IDX);
+ setautogain(gspca_dev);
}
return 0;
}
@@ -2173,12 +1196,8 @@
struct sd *sd = (struct sd *) gspca_dev;
sd->sharpness = val;
- if (gspca_dev->streaming) {
- if (sd->sensor == SENSOR_OV772X)
- setsharpness_77(gspca_dev);
- else
- setsharpness_96(gspca_dev);
- }
+ if (gspca_dev->streaming)
+ setsharpness(gspca_dev);
return 0;
}
@@ -2257,7 +1276,7 @@
/* Set requested framerate */
sd->frame_rate = tpf->denominator / tpf->numerator;
- if (gspca_dev->streaming && sd->sensor == SENSOR_OV772X)
+ if (gspca_dev->streaming)
set_frame_rate(gspca_dev);
/* Return the actual framerate */
@@ -2267,57 +1286,23 @@
return 0;
}
-static int sd_querymenu(struct gspca_dev *gspca_dev,
- struct v4l2_querymenu *menu)
-{
- switch (menu->id) {
- case V4L2_CID_POWER_LINE_FREQUENCY:
- switch (menu->index) {
- case 0: /* V4L2_CID_POWER_LINE_FREQUENCY_DISABLED */
- strcpy((char *) menu->name, "NoFliker");
- return 0;
- case 1: /* V4L2_CID_POWER_LINE_FREQUENCY_50HZ */
- strcpy((char *) menu->name, "50 Hz");
- return 0;
- case 2: /* V4L2_CID_POWER_LINE_FREQUENCY_60HZ */
- strcpy((char *) menu->name, "60 Hz");
- return 0;
- }
- break;
- }
- return -EINVAL;
-}
-
/* sub-driver description */
-static const struct sd_desc sd_desc_ov772x = {
+static const struct sd_desc sd_desc = {
.name = MODULE_NAME,
- .ctrls = sd_ctrls_ov772x,
- .nctrls = ARRAY_SIZE(sd_ctrls_ov772x),
+ .ctrls = sd_ctrls,
+ .nctrls = ARRAY_SIZE(sd_ctrls),
.config = sd_config,
.init = sd_init,
- .start = sd_start_ov772x,
- .stopN = sd_stopN_ov772x,
+ .start = sd_start,
+ .stopN = sd_stopN,
.pkt_scan = sd_pkt_scan,
.get_streamparm = sd_get_streamparm,
.set_streamparm = sd_set_streamparm,
};
-static const struct sd_desc sd_desc_ov965x = {
- .name = MODULE_NAME,
- .ctrls = sd_ctrls_ov965x,
- .nctrls = ARRAY_SIZE(sd_ctrls_ov965x),
- .config = sd_config,
- .init = sd_init,
- .start = sd_start_ov965x,
- .stopN = sd_stopN_ov965x,
- .pkt_scan = sd_pkt_scan,
- .querymenu = sd_querymenu,
-};
-
/* -- module initialisation -- */
static const __devinitdata struct usb_device_id device_table[] = {
- {USB_DEVICE(0x06f8, 0x3003), .driver_info = SENSOR_OV965X},
- {USB_DEVICE(0x1415, 0x2000), .driver_info = SENSOR_OV772X},
+ {USB_DEVICE(0x1415, 0x2000)},
{}
};
@@ -2326,11 +1311,7 @@
/* -- device connect -- */
static int sd_probe(struct usb_interface *intf, const struct usb_device_id *id)
{
- return gspca_dev_probe(intf, id,
- id->driver_info == SENSOR_OV772X
- ? &sd_desc_ov772x
- : &sd_desc_ov965x,
- sizeof(struct sd),
+ return gspca_dev_probe(intf, id, &sd_desc, sizeof(struct sd),
THIS_MODULE);
}
diff --git a/drivers/media/video/gspca/ov534_9.c b/drivers/media/video/gspca/ov534_9.c
new file mode 100644
index 0000000..bbe5a03
--- /dev/null
+++ b/drivers/media/video/gspca/ov534_9.c
@@ -0,0 +1,1477 @@
+/*
+ * ov534-ov965x gspca driver
+ *
+ * Copyright (C) 2009-2010 Jean-Francois Moine http://moinejf.free.fr
+ * Copyright (C) 2008 Antonio Ospite <ospite@studenti.unina.it>
+ * Copyright (C) 2008 Jim Paris <jim@jtan.com>
+ *
+ * Based on a prototype written by Mark Ferrell <majortrips@gmail.com>
+ * USB protocol reverse engineered by Jim Paris <jim@jtan.com>
+ * https://jim.sh/svn/jim/devl/playstation/ps3/eye/test/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#define MODULE_NAME "ov534_9"
+
+#include "gspca.h"
+
+#define OV534_REG_ADDRESS 0xf1 /* sensor address */
+#define OV534_REG_SUBADDR 0xf2
+#define OV534_REG_WRITE 0xf3
+#define OV534_REG_READ 0xf4
+#define OV534_REG_OPERATION 0xf5
+#define OV534_REG_STATUS 0xf6
+
+#define OV534_OP_WRITE_3 0x37
+#define OV534_OP_WRITE_2 0x33
+#define OV534_OP_READ_2 0xf9
+
+#define CTRL_TIMEOUT 500
+
+MODULE_AUTHOR("Jean-Francois Moine <moinejf@free.fr>");
+MODULE_DESCRIPTION("GSPCA/OV534_9 USB Camera Driver");
+MODULE_LICENSE("GPL");
+
+/* specific webcam descriptor */
+struct sd {
+ struct gspca_dev gspca_dev; /* !! must be the first item */
+ __u32 last_pts;
+ u8 last_fid;
+
+ u8 brightness;
+ u8 contrast;
+ u8 autogain;
+ u8 exposure;
+ s8 sharpness;
+ u8 satur;
+ u8 freq;
+};
+
+/* V4L2 controls supported by the driver */
+static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_setcontrast(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getcontrast(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getautogain(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_setexposure(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getexposure(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_setsharpness(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getsharpness(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_setsatur(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getsatur(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_setfreq(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getfreq(struct gspca_dev *gspca_dev, __s32 *val);
+
+static const struct ctrl sd_ctrls[] = {
+ { /* 0 */
+ {
+ .id = V4L2_CID_BRIGHTNESS,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Brightness",
+ .minimum = 0,
+ .maximum = 15,
+ .step = 1,
+#define BRIGHTNESS_DEF 7
+ .default_value = BRIGHTNESS_DEF,
+ },
+ .set = sd_setbrightness,
+ .get = sd_getbrightness,
+ },
+ { /* 1 */
+ {
+ .id = V4L2_CID_CONTRAST,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Contrast",
+ .minimum = 0,
+ .maximum = 15,
+ .step = 1,
+#define CONTRAST_DEF 3
+ .default_value = CONTRAST_DEF,
+ },
+ .set = sd_setcontrast,
+ .get = sd_getcontrast,
+ },
+ { /* 2 */
+ {
+ .id = V4L2_CID_AUTOGAIN,
+ .type = V4L2_CTRL_TYPE_BOOLEAN,
+ .name = "Autogain",
+ .minimum = 0,
+ .maximum = 1,
+ .step = 1,
+#define AUTOGAIN_DEF 1
+ .default_value = AUTOGAIN_DEF,
+ },
+ .set = sd_setautogain,
+ .get = sd_getautogain,
+ },
+#define EXPO_IDX 3
+ { /* 3 */
+ {
+ .id = V4L2_CID_EXPOSURE,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Exposure",
+ .minimum = 0,
+ .maximum = 3,
+ .step = 1,
+#define EXPO_DEF 0
+ .default_value = EXPO_DEF,
+ },
+ .set = sd_setexposure,
+ .get = sd_getexposure,
+ },
+ { /* 4 */
+ {
+ .id = V4L2_CID_SHARPNESS,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Sharpness",
+ .minimum = -1, /* -1 = auto */
+ .maximum = 4,
+ .step = 1,
+#define SHARPNESS_DEF -1
+ .default_value = SHARPNESS_DEF,
+ },
+ .set = sd_setsharpness,
+ .get = sd_getsharpness,
+ },
+ { /* 5 */
+ {
+ .id = V4L2_CID_SATURATION,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Saturation",
+ .minimum = 0,
+ .maximum = 4,
+ .step = 1,
+#define SATUR_DEF 2
+ .default_value = SATUR_DEF,
+ },
+ .set = sd_setsatur,
+ .get = sd_getsatur,
+ },
+ {
+ {
+ .id = V4L2_CID_POWER_LINE_FREQUENCY,
+ .type = V4L2_CTRL_TYPE_MENU,
+ .name = "Light frequency filter",
+ .minimum = 0,
+ .maximum = 2, /* 0: 0, 1: 50Hz, 2:60Hz */
+ .step = 1,
+#define FREQ_DEF 0
+ .default_value = FREQ_DEF,
+ },
+ .set = sd_setfreq,
+ .get = sd_getfreq,
+ },
+};
+
+static const struct v4l2_pix_format ov965x_mode[] = {
+#define QVGA_MODE 0
+ {320, 240, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+ .bytesperline = 320,
+ .sizeimage = 320 * 240 * 3 / 8 + 590,
+ .colorspace = V4L2_COLORSPACE_JPEG},
+#define VGA_MODE 1
+ {640, 480, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+ .bytesperline = 640,
+ .sizeimage = 640 * 480 * 3 / 8 + 590,
+ .colorspace = V4L2_COLORSPACE_JPEG},
+#define SVGA_MODE 2
+ {800, 600, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+ .bytesperline = 800,
+ .sizeimage = 800 * 600 * 3 / 8 + 590,
+ .colorspace = V4L2_COLORSPACE_JPEG},
+#define XGA_MODE 3
+ {1024, 768, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+ .bytesperline = 1024,
+ .sizeimage = 1024 * 768 * 3 / 8 + 590,
+ .colorspace = V4L2_COLORSPACE_JPEG},
+#define SXGA_MODE 4
+ {1280, 1024, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+ .bytesperline = 1280,
+ .sizeimage = 1280 * 1024 * 3 / 8 + 590,
+ .colorspace = V4L2_COLORSPACE_JPEG},
+};
+
+static const u8 bridge_init[][2] = {
+ {0x88, 0xf8},
+ {0x89, 0xff},
+ {0x76, 0x03},
+ {0x92, 0x03},
+ {0x95, 0x10},
+ {0xe2, 0x00},
+ {0xe7, 0x3e},
+ {0x8d, 0x1c},
+ {0x8e, 0x00},
+ {0x8f, 0x00},
+ {0x1f, 0x00},
+ {0xc3, 0xf9},
+ {0x89, 0xff},
+ {0x88, 0xf8},
+ {0x76, 0x03},
+ {0x92, 0x01},
+ {0x93, 0x18},
+ {0x1c, 0x0a},
+ {0x1d, 0x48},
+ {0xc0, 0x50},
+ {0xc1, 0x3c},
+ {0x34, 0x05},
+ {0xc2, 0x0c},
+ {0xc3, 0xf9},
+ {0x34, 0x05},
+ {0xe7, 0x2e},
+ {0x31, 0xf9},
+ {0x35, 0x02},
+ {0xd9, 0x10},
+ {0x25, 0x42},
+ {0x94, 0x11},
+};
+
+static const u8 sensor_init[][2] = {
+ {0x12, 0x80}, /* com7 - SSCB reset */
+ {0x00, 0x00}, /* gain */
+ {0x01, 0x80}, /* blue */
+ {0x02, 0x80}, /* red */
+ {0x03, 0x1b}, /* vref */
+ {0x04, 0x03}, /* com1 - exposure low bits */
+ {0x0b, 0x57}, /* ver */
+ {0x0e, 0x61}, /* com5 */
+ {0x0f, 0x42}, /* com6 */
+ {0x11, 0x00}, /* clkrc */
+ {0x12, 0x02}, /* com7 - 15fps VGA YUYV */
+ {0x13, 0xe7}, /* com8 - everything (AGC, AWB and AEC) */
+ {0x14, 0x28}, /* com9 */
+ {0x16, 0x24}, /* reg16 */
+ {0x17, 0x1d}, /* hstart*/
+ {0x18, 0xbd}, /* hstop */
+ {0x19, 0x01}, /* vstrt */
+ {0x1a, 0x81}, /* vstop*/
+ {0x1e, 0x04}, /* mvfp */
+ {0x24, 0x3c}, /* aew */
+ {0x25, 0x36}, /* aeb */
+ {0x26, 0x71}, /* vpt */
+ {0x27, 0x08}, /* bbias */
+ {0x28, 0x08}, /* gbbias */
+ {0x29, 0x15}, /* gr com */
+ {0x2a, 0x00}, /* exhch */
+ {0x2b, 0x00}, /* exhcl */
+ {0x2c, 0x08}, /* rbias */
+ {0x32, 0xff}, /* href */
+ {0x33, 0x00}, /* chlf */
+ {0x34, 0x3f}, /* aref1 */
+ {0x35, 0x00}, /* aref2 */
+ {0x36, 0xf8}, /* aref3 */
+ {0x38, 0x72}, /* adc2 */
+ {0x39, 0x57}, /* aref4 */
+ {0x3a, 0x80}, /* tslb - yuyv */
+ {0x3b, 0xc4}, /* com11 - night mode 1/4 frame rate */
+ {0x3d, 0x99}, /* com13 */
+ {0x3f, 0xc1}, /* edge */
+ {0x40, 0xc0}, /* com15 */
+ {0x41, 0x40}, /* com16 */
+ {0x42, 0xc0}, /* com17 */
+ {0x43, 0x0a}, /* rsvd */
+ {0x44, 0xf0},
+ {0x45, 0x46},
+ {0x46, 0x62},
+ {0x47, 0x2a},
+ {0x48, 0x3c},
+ {0x4a, 0xfc},
+ {0x4b, 0xfc},
+ {0x4c, 0x7f},
+ {0x4d, 0x7f},
+ {0x4e, 0x7f},
+ {0x4f, 0x98}, /* matrix */
+ {0x50, 0x98},
+ {0x51, 0x00},
+ {0x52, 0x28},
+ {0x53, 0x70},
+ {0x54, 0x98},
+ {0x58, 0x1a}, /* matrix coef sign */
+ {0x59, 0x85}, /* AWB control */
+ {0x5a, 0xa9},
+ {0x5b, 0x64},
+ {0x5c, 0x84},
+ {0x5d, 0x53},
+ {0x5e, 0x0e},
+ {0x5f, 0xf0}, /* AWB blue limit */
+ {0x60, 0xf0}, /* AWB red limit */
+ {0x61, 0xf0}, /* AWB green limit */
+ {0x62, 0x00}, /* lcc1 */
+ {0x63, 0x00}, /* lcc2 */
+ {0x64, 0x02}, /* lcc3 */
+ {0x65, 0x16}, /* lcc4 */
+ {0x66, 0x01}, /* lcc5 */
+ {0x69, 0x02}, /* hv */
+ {0x6b, 0x5a}, /* dbvl */
+ {0x6c, 0x04},
+ {0x6d, 0x55},
+ {0x6e, 0x00},
+ {0x6f, 0x9d},
+ {0x70, 0x21}, /* dnsth */
+ {0x71, 0x78},
+ {0x72, 0x00}, /* poidx */
+ {0x73, 0x01}, /* pckdv */
+ {0x74, 0x3a}, /* xindx */
+ {0x75, 0x35}, /* yindx */
+ {0x76, 0x01},
+ {0x77, 0x02},
+ {0x7a, 0x12}, /* gamma curve */
+ {0x7b, 0x08},
+ {0x7c, 0x16},
+ {0x7d, 0x30},
+ {0x7e, 0x5e},
+ {0x7f, 0x72},
+ {0x80, 0x82},
+ {0x81, 0x8e},
+ {0x82, 0x9a},
+ {0x83, 0xa4},
+ {0x84, 0xac},
+ {0x85, 0xb8},
+ {0x86, 0xc3},
+ {0x87, 0xd6},
+ {0x88, 0xe6},
+ {0x89, 0xf2},
+ {0x8a, 0x03},
+ {0x8c, 0x89}, /* com19 */
+ {0x14, 0x28}, /* com9 */
+ {0x90, 0x7d},
+ {0x91, 0x7b},
+ {0x9d, 0x03}, /* lcc6 */
+ {0x9e, 0x04}, /* lcc7 */
+ {0x9f, 0x7a},
+ {0xa0, 0x79},
+ {0xa1, 0x40}, /* aechm */
+ {0xa4, 0x50}, /* com21 */
+ {0xa5, 0x68}, /* com26 */
+ {0xa6, 0x4a}, /* AWB green */
+ {0xa8, 0xc1}, /* refa8 */
+ {0xa9, 0xef}, /* refa9 */
+ {0xaa, 0x92},
+ {0xab, 0x04},
+ {0xac, 0x80}, /* black level control */
+ {0xad, 0x80},
+ {0xae, 0x80},
+ {0xaf, 0x80},
+ {0xb2, 0xf2},
+ {0xb3, 0x20},
+ {0xb4, 0x20}, /* ctrlb4 */
+ {0xb5, 0x00},
+ {0xb6, 0xaf},
+ {0xbb, 0xae},
+ {0xbc, 0x7f}, /* ADC channel offsets */
+ {0xdb, 0x7f},
+ {0xbe, 0x7f},
+ {0xbf, 0x7f},
+ {0xc0, 0xe2},
+ {0xc1, 0xc0},
+ {0xc2, 0x01},
+ {0xc3, 0x4e},
+ {0xc6, 0x85},
+ {0xc7, 0x80}, /* com24 */
+ {0xc9, 0xe0},
+ {0xca, 0xe8},
+ {0xcb, 0xf0},
+ {0xcc, 0xd8},
+ {0xcd, 0xf1},
+ {0x4f, 0x98}, /* matrix */
+ {0x50, 0x98},
+ {0x51, 0x00},
+ {0x52, 0x28},
+ {0x53, 0x70},
+ {0x54, 0x98},
+ {0x58, 0x1a},
+ {0xff, 0x41}, /* read 41, write ff 00 */
+ {0x41, 0x40}, /* com16 */
+
+ {0xc5, 0x03}, /* 60 Hz banding filter */
+ {0x6a, 0x02}, /* 50 Hz banding filter */
+
+ {0x12, 0x62}, /* com7 - 30fps VGA YUV */
+ {0x36, 0xfa}, /* aref3 */
+ {0x69, 0x0a}, /* hv */
+ {0x8c, 0x89}, /* com22 */
+ {0x14, 0x28}, /* com9 */
+ {0x3e, 0x0c},
+ {0x41, 0x40}, /* com16 */
+ {0x72, 0x00},
+ {0x73, 0x00},
+ {0x74, 0x3a},
+ {0x75, 0x35},
+ {0x76, 0x01},
+ {0xc7, 0x80},
+ {0x03, 0x12}, /* vref */
+ {0x17, 0x16}, /* hstart */
+ {0x18, 0x02}, /* hstop */
+ {0x19, 0x01}, /* vstrt */
+ {0x1a, 0x3d}, /* vstop */
+ {0x32, 0xff}, /* href */
+ {0xc0, 0xaa},
+};
+
+static const u8 bridge_init_2[][2] = {
+ {0x94, 0xaa},
+ {0xf1, 0x60},
+ {0xe5, 0x04},
+ {0xc0, 0x50},
+ {0xc1, 0x3c},
+ {0x8c, 0x00},
+ {0x8d, 0x1c},
+ {0x34, 0x05},
+
+ {0xc2, 0x0c},
+ {0xc3, 0xf9},
+ {0xda, 0x01},
+ {0x50, 0x00},
+ {0x51, 0xa0},
+ {0x52, 0x3c},
+ {0x53, 0x00},
+ {0x54, 0x00},
+ {0x55, 0x00},
+ {0x57, 0x00},
+ {0x5c, 0x00},
+ {0x5a, 0xa0},
+ {0x5b, 0x78},
+ {0x35, 0x02},
+ {0xd9, 0x10},
+ {0x94, 0x11},
+};
+
+static const u8 sensor_init_2[][2] = {
+ {0x3b, 0xc4},
+ {0x1e, 0x04}, /* mvfp */
+ {0x13, 0xe0}, /* com8 */
+ {0x00, 0x00}, /* gain */
+ {0x13, 0xe7}, /* com8 - everything (AGC, AWB and AEC) */
+ {0x11, 0x03}, /* clkrc */
+ {0x6b, 0x5a}, /* dblv */
+ {0x6a, 0x05},
+ {0xc5, 0x07},
+ {0xa2, 0x4b},
+ {0xa3, 0x3e},
+ {0x2d, 0x00},
+ {0xff, 0x42}, /* read 42, write ff 00 */
+ {0x42, 0xc0}, /* com17 */
+ {0x2d, 0x00},
+ {0xff, 0x42}, /* read 42, write ff 00 */
+ {0x42, 0xc1}, /* com17 */
+/* sharpness */
+ {0x3f, 0x01},
+ {0xff, 0x42}, /* read 42, write ff 00 */
+ {0x42, 0xc1}, /* com17 */
+/* saturation */
+ {0x4f, 0x98}, /* matrix */
+ {0x50, 0x98},
+ {0x51, 0x00},
+ {0x52, 0x28},
+ {0x53, 0x70},
+ {0x54, 0x98},
+ {0x58, 0x1a},
+ {0xff, 0x41}, /* read 41, write ff 00 */
+ {0x41, 0x40}, /* com16 */
+/* contrast */
+ {0x56, 0x40},
+/* brightness */
+ {0x55, 0x8f},
+/* expo */
+ {0x10, 0x25}, /* aech - exposure high bits */
+ {0xff, 0x13}, /* read 13, write ff 00 */
+ {0x13, 0xe7}, /* com8 - everything (AGC, AWB and AEC) */
+};
+
+static const u8 sensor_start_1_vga[][2] = { /* same for qvga */
+ {0x12, 0x62}, /* com7 - 30fps VGA YUV */
+ {0x36, 0xfa}, /* aref3 */
+ {0x69, 0x0a}, /* hv */
+ {0x8c, 0x89}, /* com22 */
+ {0x14, 0x28}, /* com9 */
+ {0x3e, 0x0c}, /* com14 */
+ {0x41, 0x40}, /* com16 */
+ {0x72, 0x00},
+ {0x73, 0x00},
+ {0x74, 0x3a},
+ {0x75, 0x35},
+ {0x76, 0x01},
+ {0xc7, 0x80}, /* com24 */
+ {0x03, 0x12}, /* vref */
+ {0x17, 0x16}, /* hstart */
+ {0x18, 0x02}, /* hstop */
+ {0x19, 0x01}, /* vstrt */
+ {0x1a, 0x3d}, /* vstop */
+ {0x32, 0xff}, /* href */
+ {0xc0, 0xaa},
+};
+
+static const u8 sensor_start_1_svga[][2] = {
+ {0x12, 0x02}, /* com7 - YUYV - VGA 15 full resolution */
+ {0x36, 0xf8}, /* aref3 */
+ {0x69, 0x02}, /* hv */
+ {0x8c, 0x0d}, /* com22 */
+ {0x3e, 0x0c}, /* com14 */
+ {0x41, 0x40}, /* com16 */
+ {0x72, 0x00},
+ {0x73, 0x01},
+ {0x74, 0x3a},
+ {0x75, 0x35},
+ {0x76, 0x01},
+ {0xc7, 0x80}, /* com24 */
+ {0x03, 0x1b}, /* vref */
+ {0x17, 0x1d}, /* hstart */
+ {0x18, 0xbd}, /* hstop */
+ {0x19, 0x01}, /* vstrt */
+ {0x1a, 0x81}, /* vstop */
+ {0x32, 0xff}, /* href */
+ {0xc0, 0xe2},
+};
+
+static const u8 sensor_start_1_xga[][2] = {
+ {0x12, 0x02}, /* com7 */
+ {0x36, 0xf8}, /* aref3 */
+ {0x69, 0x02}, /* hv */
+ {0x8c, 0x89}, /* com22 */
+ {0x14, 0x28}, /* com9 */
+ {0x3e, 0x0c}, /* com14 */
+ {0x41, 0x40}, /* com16 */
+ {0x72, 0x00},
+ {0x73, 0x01},
+ {0x74, 0x3a},
+ {0x75, 0x35},
+ {0x76, 0x01},
+ {0xc7, 0x80}, /* com24 */
+ {0x03, 0x1b}, /* vref */
+ {0x17, 0x1d}, /* hstart */
+ {0x18, 0xbd}, /* hstop */
+ {0x19, 0x01}, /* vstrt */
+ {0x1a, 0x81}, /* vstop */
+ {0x32, 0xff}, /* href */
+ {0xc0, 0xe2},
+};
+
+static const u8 sensor_start_1_sxga[][2] = {
+ {0x12, 0x02}, /* com7 */
+ {0x36, 0xf8}, /* aref3 */
+ {0x69, 0x02}, /* hv */
+ {0x8c, 0x89}, /* com22 */
+ {0x14, 0x28}, /* com9 */
+ {0x3e, 0x0c}, /* com14 */
+ {0x41, 0x40}, /* com16 */
+ {0x72, 0x00},
+ {0x73, 0x01},
+ {0x74, 0x3a},
+ {0x75, 0x35},
+ {0x76, 0x01},
+ {0xc7, 0x80}, /* com24 */
+ {0x03, 0x1b}, /* vref */
+ {0x17, 0x1d}, /* hstart */
+ {0x18, 0x02}, /* hstop */
+ {0x19, 0x01}, /* vstrt */
+ {0x1a, 0x81}, /* vstop */
+ {0x32, 0xff}, /* href */
+ {0xc0, 0xe2},
+};
+
+static const u8 bridge_start_qvga[][2] = {
+ {0x94, 0xaa},
+ {0xf1, 0x60},
+ {0xe5, 0x04},
+ {0xc0, 0x50},
+ {0xc1, 0x3c},
+ {0x8c, 0x00},
+ {0x8d, 0x1c},
+ {0x34, 0x05},
+
+ {0xc2, 0x4c},
+ {0xc3, 0xf9},
+ {0xda, 0x00},
+ {0x50, 0x00},
+ {0x51, 0xa0},
+ {0x52, 0x78},
+ {0x53, 0x00},
+ {0x54, 0x00},
+ {0x55, 0x00},
+ {0x57, 0x00},
+ {0x5c, 0x00},
+ {0x5a, 0x50},
+ {0x5b, 0x3c},
+ {0x35, 0x02},
+ {0xd9, 0x10},
+ {0x94, 0x11},
+};
+
+static const u8 bridge_start_vga[][2] = {
+ {0x94, 0xaa},
+ {0xf1, 0x60},
+ {0xe5, 0x04},
+ {0xc0, 0x50},
+ {0xc1, 0x3c},
+ {0x8c, 0x00},
+ {0x8d, 0x1c},
+ {0x34, 0x05},
+ {0xc2, 0x0c},
+ {0xc3, 0xf9},
+ {0xda, 0x01},
+ {0x50, 0x00},
+ {0x51, 0xa0},
+ {0x52, 0x3c},
+ {0x53, 0x00},
+ {0x54, 0x00},
+ {0x55, 0x00},
+ {0x57, 0x00},
+ {0x5c, 0x00},
+ {0x5a, 0xa0},
+ {0x5b, 0x78},
+ {0x35, 0x02},
+ {0xd9, 0x10},
+ {0x94, 0x11},
+};
+
+static const u8 bridge_start_svga[][2] = {
+ {0x94, 0xaa},
+ {0xf1, 0x60},
+ {0xe5, 0x04},
+ {0xc0, 0xa0},
+ {0xc1, 0x80},
+ {0x8c, 0x00},
+ {0x8d, 0x1c},
+ {0x34, 0x05},
+ {0xc2, 0x4c},
+ {0xc3, 0xf9},
+ {0x50, 0x00},
+ {0x51, 0x40},
+ {0x52, 0x00},
+ {0x53, 0x00},
+ {0x54, 0x00},
+ {0x55, 0x88},
+ {0x57, 0x00},
+ {0x5c, 0x00},
+ {0x5a, 0xc8},
+ {0x5b, 0x96},
+ {0x35, 0x02},
+ {0xd9, 0x10},
+ {0xda, 0x00},
+ {0x94, 0x11},
+};
+
+static const u8 bridge_start_xga[][2] = {
+ {0x94, 0xaa},
+ {0xf1, 0x60},
+ {0xe5, 0x04},
+ {0xc0, 0xa0},
+ {0xc1, 0x80},
+ {0x8c, 0x00},
+ {0x8d, 0x1c},
+ {0x34, 0x05},
+ {0xc2, 0x4c},
+ {0xc3, 0xf9},
+ {0x50, 0x00},
+ {0x51, 0x40},
+ {0x52, 0x00},
+ {0x53, 0x00},
+ {0x54, 0x00},
+ {0x55, 0x88},
+ {0x57, 0x00},
+ {0x5c, 0x01},
+ {0x5a, 0x00},
+ {0x5b, 0xc0},
+ {0x35, 0x02},
+ {0xd9, 0x10},
+ {0xda, 0x01},
+ {0x94, 0x11},
+};
+
+static const u8 bridge_start_sxga[][2] = {
+ {0x94, 0xaa},
+ {0xf1, 0x60},
+ {0xe5, 0x04},
+ {0xc0, 0xa0},
+ {0xc1, 0x80},
+ {0x8c, 0x00},
+ {0x8d, 0x1c},
+ {0x34, 0x05},
+ {0xc2, 0x0c},
+ {0xc3, 0xf9},
+ {0xda, 0x00},
+ {0x35, 0x02},
+ {0xd9, 0x10},
+ {0x94, 0x11},
+};
+
+static const u8 sensor_start_2_qvga[][2] = {
+ {0x3b, 0xe4}, /* com11 - night mode 1/4 frame rate */
+ {0x1e, 0x04}, /* mvfp */
+ {0x13, 0xe0}, /* com8 */
+ {0x00, 0x00},
+ {0x13, 0xe7}, /* com8 - everything (AGC, AWB and AEC) */
+ {0x11, 0x01}, /* clkrc */
+ {0x6b, 0x5a}, /* dblv */
+ {0x6a, 0x02}, /* 50 Hz banding filter */
+ {0xc5, 0x03}, /* 60 Hz banding filter */
+ {0xa2, 0x96}, /* bd50 */
+ {0xa3, 0x7d}, /* bd60 */
+
+ {0xff, 0x13}, /* read 13, write ff 00 */
+ {0x13, 0xe7},
+ {0x3a, 0x80}, /* tslb - yuyv */
+};
+
+static const u8 sensor_start_2_vga[][2] = {
+ {0x3b, 0xc4}, /* com11 - night mode 1/4 frame rate */
+ {0x1e, 0x04}, /* mvfp */
+ {0x13, 0xe0}, /* com8 */
+ {0x00, 0x00},
+ {0x13, 0xe7}, /* com8 - everything (AGC, AWB and AEC) */
+ {0x11, 0x03}, /* clkrc */
+ {0x6b, 0x5a}, /* dblv */
+ {0x6a, 0x05}, /* 50 Hz banding filter */
+ {0xc5, 0x07}, /* 60 Hz banding filter */
+ {0xa2, 0x4b}, /* bd50 */
+ {0xa3, 0x3e}, /* bd60 */
+
+ {0x2d, 0x00}, /* advfl */
+};
+
+static const u8 sensor_start_2_svga[][2] = { /* same for xga */
+ {0x3b, 0xc4}, /* com11 - night mode 1/4 frame rate */
+ {0x1e, 0x04}, /* mvfp */
+ {0x13, 0xe0}, /* com8 */
+ {0x00, 0x00},
+ {0x13, 0xe7}, /* com8 - everything (AGC, AWB and AEC) */
+ {0x11, 0x01}, /* clkrc */
+ {0x6b, 0x5a}, /* dblv */
+ {0x6a, 0x0c}, /* 50 Hz banding filter */
+ {0xc5, 0x0f}, /* 60 Hz banding filter */
+ {0xa2, 0x4e}, /* bd50 */
+ {0xa3, 0x41}, /* bd60 */
+};
+
+static const u8 sensor_start_2_sxga[][2] = {
+ {0x13, 0xe0}, /* com8 */
+ {0x00, 0x00},
+ {0x13, 0xe7}, /* com8 - everything (AGC, AWB and AEC) */
+ {0x3b, 0xc4}, /* com11 - night mode 1/4 frame rate */
+ {0x1e, 0x04}, /* mvfp */
+ {0x11, 0x01}, /* clkrc */
+ {0x6b, 0x5a}, /* dblv */
+ {0x6a, 0x0c}, /* 50 Hz banding filter */
+ {0xc5, 0x0f}, /* 60 Hz banding filter */
+ {0xa2, 0x4e}, /* bd50 */
+ {0xa3, 0x41}, /* bd60 */
+};
+
+static void reg_w_i(struct gspca_dev *gspca_dev, u16 reg, u8 val)
+{
+ struct usb_device *udev = gspca_dev->dev;
+ int ret;
+
+ if (gspca_dev->usb_err < 0)
+ return;
+ gspca_dev->usb_buf[0] = val;
+ ret = usb_control_msg(udev,
+ usb_sndctrlpipe(udev, 0),
+ 0x01,
+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ 0x00, reg, gspca_dev->usb_buf, 1, CTRL_TIMEOUT);
+ if (ret < 0) {
+ PDEBUG(D_ERR, "reg_w failed %d", ret);
+ gspca_dev->usb_err = ret;
+ }
+}
+
+static void reg_w(struct gspca_dev *gspca_dev, u16 reg, u8 val)
+{
+ PDEBUG(D_USBO, "reg_w [%04x] = %02x", reg, val);
+ reg_w_i(gspca_dev, reg, val);
+}
+
+static u8 reg_r(struct gspca_dev *gspca_dev, u16 reg)
+{
+ struct usb_device *udev = gspca_dev->dev;
+ int ret;
+
+ if (gspca_dev->usb_err < 0)
+ return 0;
+ ret = usb_control_msg(udev,
+ usb_rcvctrlpipe(udev, 0),
+ 0x01,
+ USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ 0x00, reg, gspca_dev->usb_buf, 1, CTRL_TIMEOUT);
+ PDEBUG(D_USBI, "reg_r [%04x] -> %02x", reg, gspca_dev->usb_buf[0]);
+ if (ret < 0) {
+ PDEBUG(D_ERR, "reg_r err %d", ret);
+ gspca_dev->usb_err = ret;
+ }
+ return gspca_dev->usb_buf[0];
+}
+
+static int sccb_check_status(struct gspca_dev *gspca_dev)
+{
+ u8 data;
+ int i;
+
+ for (i = 0; i < 5; i++) {
+ data = reg_r(gspca_dev, OV534_REG_STATUS);
+
+ switch (data) {
+ case 0x00:
+ return 1;
+ case 0x04:
+ return 0;
+ case 0x03:
+ break;
+ default:
+ PDEBUG(D_USBI|D_USBO,
+ "sccb status 0x%02x, attempt %d/5",
+ data, i + 1);
+ }
+ }
+ return 0;
+}
+
+static void sccb_write(struct gspca_dev *gspca_dev, u8 reg, u8 val)
+{
+ PDEBUG(D_USBO, "sccb_write [%02x] = %02x", reg, val);
+ reg_w_i(gspca_dev, OV534_REG_SUBADDR, reg);
+ reg_w_i(gspca_dev, OV534_REG_WRITE, val);
+ reg_w_i(gspca_dev, OV534_REG_OPERATION, OV534_OP_WRITE_3);
+
+ if (!sccb_check_status(gspca_dev))
+ PDEBUG(D_ERR, "sccb_write failed");
+}
+
+static u8 sccb_read(struct gspca_dev *gspca_dev, u16 reg)
+{
+ reg_w(gspca_dev, OV534_REG_SUBADDR, reg);
+ reg_w(gspca_dev, OV534_REG_OPERATION, OV534_OP_WRITE_2);
+ if (!sccb_check_status(gspca_dev))
+ PDEBUG(D_ERR, "sccb_read failed 1");
+
+ reg_w(gspca_dev, OV534_REG_OPERATION, OV534_OP_READ_2);
+ if (!sccb_check_status(gspca_dev))
+ PDEBUG(D_ERR, "sccb_read failed 2");
+
+ return reg_r(gspca_dev, OV534_REG_READ);
+}
+
+/* output a bridge sequence (reg - val) */
+static void reg_w_array(struct gspca_dev *gspca_dev,
+ const u8 (*data)[2], int len)
+{
+ while (--len >= 0) {
+ reg_w(gspca_dev, (*data)[0], (*data)[1]);
+ data++;
+ }
+}
+
+/* output a sensor sequence (reg - val) */
+static void sccb_w_array(struct gspca_dev *gspca_dev,
+ const u8 (*data)[2], int len)
+{
+ while (--len >= 0) {
+ if ((*data)[0] != 0xff) {
+ sccb_write(gspca_dev, (*data)[0], (*data)[1]);
+ } else {
+ sccb_read(gspca_dev, (*data)[1]);
+ sccb_write(gspca_dev, 0xff, 0x00);
+ }
+ data++;
+ }
+}
+
+/* Two bits control LED: 0x21 bit 7 and 0x23 bit 7.
+ * (direction and output)? */
+static void set_led(struct gspca_dev *gspca_dev, int status)
+{
+ u8 data;
+
+ PDEBUG(D_CONF, "led status: %d", status);
+
+ data = reg_r(gspca_dev, 0x21);
+ data |= 0x80;
+ reg_w(gspca_dev, 0x21, data);
+
+ data = reg_r(gspca_dev, 0x23);
+ if (status)
+ data |= 0x80;
+ else
+ data &= ~0x80;
+
+ reg_w(gspca_dev, 0x23, data);
+
+ if (!status) {
+ data = reg_r(gspca_dev, 0x21);
+ data &= ~0x80;
+ reg_w(gspca_dev, 0x21, data);
+ }
+}
+
+static void setbrightness(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ u8 val;
+
+ val = sd->brightness;
+ if (val < 8)
+ val = 15 - val; /* f .. 8 */
+ else
+ val = val - 8; /* 0 .. 7 */
+ sccb_write(gspca_dev, 0x55, /* brtn - brightness adjustment */
+ 0x0f | (val << 4));
+}
+
+static void setcontrast(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sccb_write(gspca_dev, 0x56, /* cnst1 - contrast 1 ctrl coeff */
+ sd->contrast << 4);
+}
+
+static void setautogain(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ u8 val;
+
+/*fixme: should adjust agc/awb/aec by different controls */
+ val = sd->autogain;
+ val = sccb_read(gspca_dev, 0x13); /* com8 */
+ sccb_write(gspca_dev, 0xff, 0x00);
+ if (sd->autogain)
+ val |= 0x05; /* agc & aec */
+ else
+ val &= 0xfa;
+ sccb_write(gspca_dev, 0x13, val);
+}
+
+static void setexposure(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ u8 val;
+ static const u8 expo[4] = {0x00, 0x25, 0x38, 0x5e};
+
+ sccb_write(gspca_dev, 0x10, /* aec[9:2] */
+ expo[sd->exposure]);
+
+ val = sccb_read(gspca_dev, 0x13); /* com8 */
+ sccb_write(gspca_dev, 0xff, 0x00);
+ sccb_write(gspca_dev, 0x13, val);
+
+ val = sccb_read(gspca_dev, 0xa1); /* aech */
+ sccb_write(gspca_dev, 0xff, 0x00);
+ sccb_write(gspca_dev, 0xa1, val & 0xe0); /* aec[15:10] = 0 */
+}
+
+static void setsharpness(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ s8 val;
+
+ val = sd->sharpness;
+ if (val < 0) { /* auto */
+ val = sccb_read(gspca_dev, 0x42); /* com17 */
+ sccb_write(gspca_dev, 0xff, 0x00);
+ sccb_write(gspca_dev, 0x42, val | 0x40);
+ /* Edge enhancement strength auto adjust */
+ return;
+ }
+ if (val != 0)
+ val = 1 << (val - 1);
+ sccb_write(gspca_dev, 0x3f, /* edge - edge enhance. factor */
+ val);
+ val = sccb_read(gspca_dev, 0x42); /* com17 */
+ sccb_write(gspca_dev, 0xff, 0x00);
+ sccb_write(gspca_dev, 0x42, val & 0xbf);
+}
+
+static void setsatur(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ u8 val1, val2, val3;
+ static const u8 matrix[5][2] = {
+ {0x14, 0x38},
+ {0x1e, 0x54},
+ {0x28, 0x70},
+ {0x32, 0x8c},
+ {0x48, 0x90}
+ };
+
+ val1 = matrix[sd->satur][0];
+ val2 = matrix[sd->satur][1];
+ val3 = val1 + val2;
+ sccb_write(gspca_dev, 0x4f, val3); /* matrix coeff */
+ sccb_write(gspca_dev, 0x50, val3);
+ sccb_write(gspca_dev, 0x51, 0x00);
+ sccb_write(gspca_dev, 0x52, val1);
+ sccb_write(gspca_dev, 0x53, val2);
+ sccb_write(gspca_dev, 0x54, val3);
+ sccb_write(gspca_dev, 0x58, 0x1a); /* mtxs - coeff signs */
+
+ val1 = sccb_read(gspca_dev, 0x41); /* com16 */
+ sccb_write(gspca_dev, 0xff, 0x00);
+ sccb_write(gspca_dev, 0x41, val1);
+}
+
+static void setfreq(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ u8 val;
+
+ val = sccb_read(gspca_dev, 0x13); /* com8 */
+ sccb_write(gspca_dev, 0xff, 0x00);
+ if (sd->freq == 0) {
+ sccb_write(gspca_dev, 0x13, val & 0xdf);
+ return;
+ }
+ sccb_write(gspca_dev, 0x13, val | 0x20);
+
+ val = sccb_read(gspca_dev, 0x42); /* com17 */
+ sccb_write(gspca_dev, 0xff, 0x00);
+ if (sd->freq == 1)
+ val |= 0x01;
+ else
+ val &= 0xfe;
+ sccb_write(gspca_dev, 0x42, val);
+}
+
+/* this function is called at probe time */
+static int sd_config(struct gspca_dev *gspca_dev,
+ const struct usb_device_id *id)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ struct cam *cam;
+
+ cam = &gspca_dev->cam;
+
+ cam->cam_mode = ov965x_mode;
+ cam->nmodes = ARRAY_SIZE(ov965x_mode);
+
+ sd->brightness = BRIGHTNESS_DEF;
+ sd->contrast = CONTRAST_DEF;
+#if AUTOGAIN_DEF != 0
+ sd->autogain = AUTOGAIN_DEF;
+ gspca_dev->ctrl_inac |= (1 << EXPO_IDX);
+#endif
+#if EXPO_DEF != 0
+ sd->exposure = EXPO_DEF;
+#endif
+#if SHARPNESS_DEF != 0
+ sd->sharpness = SHARPNESS_DEF;
+#endif
+ sd->satur = SATUR_DEF;
+ sd->freq = FREQ_DEF;
+
+ return 0;
+}
+
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
+{
+ u16 sensor_id;
+
+ /* reset bridge */
+ reg_w(gspca_dev, 0xe7, 0x3a);
+ reg_w(gspca_dev, 0xe0, 0x08);
+ msleep(100);
+
+ /* initialize the sensor address */
+ reg_w(gspca_dev, OV534_REG_ADDRESS, 0x60);
+
+ /* reset sensor */
+ sccb_write(gspca_dev, 0x12, 0x80);
+ msleep(10);
+
+ /* probe the sensor */
+ sccb_read(gspca_dev, 0x0a);
+ sensor_id = sccb_read(gspca_dev, 0x0a) << 8;
+ sccb_read(gspca_dev, 0x0b);
+ sensor_id |= sccb_read(gspca_dev, 0x0b);
+ PDEBUG(D_PROBE, "Sensor ID: %04x", sensor_id);
+
+ /* initialize */
+ reg_w_array(gspca_dev, bridge_init,
+ ARRAY_SIZE(bridge_init));
+ sccb_w_array(gspca_dev, sensor_init,
+ ARRAY_SIZE(sensor_init));
+ reg_w_array(gspca_dev, bridge_init_2,
+ ARRAY_SIZE(bridge_init_2));
+ sccb_w_array(gspca_dev, sensor_init_2,
+ ARRAY_SIZE(sensor_init_2));
+ reg_w(gspca_dev, 0xe0, 0x00);
+ reg_w(gspca_dev, 0xe0, 0x01);
+ set_led(gspca_dev, 0);
+ reg_w(gspca_dev, 0xe0, 0x00);
+
+ return gspca_dev->usb_err;
+}
+
+static int sd_start(struct gspca_dev *gspca_dev)
+{
+ switch (gspca_dev->curr_mode) {
+ case QVGA_MODE: /* 320x240 */
+ sccb_w_array(gspca_dev, sensor_start_1_vga,
+ ARRAY_SIZE(sensor_start_1_vga));
+ reg_w_array(gspca_dev, bridge_start_qvga,
+ ARRAY_SIZE(bridge_start_qvga));
+ sccb_w_array(gspca_dev, sensor_start_2_qvga,
+ ARRAY_SIZE(sensor_start_2_qvga));
+ break;
+ case VGA_MODE: /* 640x480 */
+ sccb_w_array(gspca_dev, sensor_start_1_vga,
+ ARRAY_SIZE(sensor_start_1_vga));
+ reg_w_array(gspca_dev, bridge_start_vga,
+ ARRAY_SIZE(bridge_start_vga));
+ sccb_w_array(gspca_dev, sensor_start_2_vga,
+ ARRAY_SIZE(sensor_start_2_vga));
+ break;
+ case SVGA_MODE: /* 800x600 */
+ sccb_w_array(gspca_dev, sensor_start_1_svga,
+ ARRAY_SIZE(sensor_start_1_svga));
+ reg_w_array(gspca_dev, bridge_start_svga,
+ ARRAY_SIZE(bridge_start_svga));
+ sccb_w_array(gspca_dev, sensor_start_2_svga,
+ ARRAY_SIZE(sensor_start_2_svga));
+ break;
+ case XGA_MODE: /* 1024x768 */
+ sccb_w_array(gspca_dev, sensor_start_1_xga,
+ ARRAY_SIZE(sensor_start_1_xga));
+ reg_w_array(gspca_dev, bridge_start_xga,
+ ARRAY_SIZE(bridge_start_xga));
+ sccb_w_array(gspca_dev, sensor_start_2_svga,
+ ARRAY_SIZE(sensor_start_2_svga));
+ break;
+ default:
+/* case SXGA_MODE: * 1280x1024 */
+ sccb_w_array(gspca_dev, sensor_start_1_sxga,
+ ARRAY_SIZE(sensor_start_1_sxga));
+ reg_w_array(gspca_dev, bridge_start_sxga,
+ ARRAY_SIZE(bridge_start_sxga));
+ sccb_w_array(gspca_dev, sensor_start_2_sxga,
+ ARRAY_SIZE(sensor_start_2_sxga));
+ break;
+ }
+ setfreq(gspca_dev);
+ setautogain(gspca_dev);
+ setbrightness(gspca_dev);
+ setcontrast(gspca_dev);
+ setexposure(gspca_dev);
+ setsharpness(gspca_dev);
+ setsatur(gspca_dev);
+
+ reg_w(gspca_dev, 0xe0, 0x00);
+ reg_w(gspca_dev, 0xe0, 0x00);
+ set_led(gspca_dev, 1);
+ return gspca_dev->usb_err;
+}
+
+static void sd_stopN(struct gspca_dev *gspca_dev)
+{
+ reg_w(gspca_dev, 0xe0, 0x01);
+ set_led(gspca_dev, 0);
+ reg_w(gspca_dev, 0xe0, 0x00);
+}
+
+/* Values for bmHeaderInfo (Video and Still Image Payload Headers, 2.4.3.3) */
+#define UVC_STREAM_EOH (1 << 7)
+#define UVC_STREAM_ERR (1 << 6)
+#define UVC_STREAM_STI (1 << 5)
+#define UVC_STREAM_RES (1 << 4)
+#define UVC_STREAM_SCR (1 << 3)
+#define UVC_STREAM_PTS (1 << 2)
+#define UVC_STREAM_EOF (1 << 1)
+#define UVC_STREAM_FID (1 << 0)
+
+static void sd_pkt_scan(struct gspca_dev *gspca_dev,
+ u8 *data, int len)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ __u32 this_pts;
+ u8 this_fid;
+ int remaining_len = len;
+
+ do {
+ len = min(remaining_len, 2040);
+
+ /* Payloads are prefixed with a UVC-style header. We
+ consider a frame to start when the FID toggles, or the PTS
+ changes. A frame ends when EOF is set, and we've received
+ the correct number of bytes. */
+
+ /* Verify UVC header. Header length is always 12 */
+ if (data[0] != 12 || len < 12) {
+ PDEBUG(D_PACK, "bad header");
+ goto discard;
+ }
+
+ /* Check errors */
+ if (data[1] & UVC_STREAM_ERR) {
+ PDEBUG(D_PACK, "payload error");
+ goto discard;
+ }
+
+ /* Extract PTS and FID */
+ if (!(data[1] & UVC_STREAM_PTS)) {
+ PDEBUG(D_PACK, "PTS not present");
+ goto discard;
+ }
+ this_pts = (data[5] << 24) | (data[4] << 16)
+ | (data[3] << 8) | data[2];
+ this_fid = data[1] & UVC_STREAM_FID;
+
+ /* If PTS or FID has changed, start a new frame. */
+ if (this_pts != sd->last_pts || this_fid != sd->last_fid) {
+ if (gspca_dev->last_packet_type == INTER_PACKET)
+ gspca_frame_add(gspca_dev, LAST_PACKET,
+ NULL, 0);
+ sd->last_pts = this_pts;
+ sd->last_fid = this_fid;
+ gspca_frame_add(gspca_dev, FIRST_PACKET,
+ data + 12, len - 12);
+ /* If this packet is marked as EOF, end the frame */
+ } else if (data[1] & UVC_STREAM_EOF) {
+ sd->last_pts = 0;
+ gspca_frame_add(gspca_dev, LAST_PACKET,
+ data + 12, len - 12);
+ } else {
+
+ /* Add the data from this payload */
+ gspca_frame_add(gspca_dev, INTER_PACKET,
+ data + 12, len - 12);
+ }
+
+ /* Done this payload */
+ goto scan_next;
+
+discard:
+ /* Discard data until a new frame starts. */
+ gspca_dev->last_packet_type = DISCARD_PACKET;
+
+scan_next:
+ remaining_len -= len;
+ data += len;
+ } while (remaining_len > 0);
+}
+
+/* controls */
+static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->brightness = val;
+ if (gspca_dev->streaming)
+ setbrightness(gspca_dev);
+ return gspca_dev->usb_err;
+}
+
+static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ *val = sd->brightness;
+ return 0;
+}
+
+static int sd_setcontrast(struct gspca_dev *gspca_dev, __s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->contrast = val;
+ if (gspca_dev->streaming)
+ setcontrast(gspca_dev);
+ return gspca_dev->usb_err;
+}
+
+static int sd_getcontrast(struct gspca_dev *gspca_dev, __s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ *val = sd->contrast;
+ return 0;
+}
+
+static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->autogain = val;
+
+ if (gspca_dev->streaming) {
+ if (val)
+ gspca_dev->ctrl_inac |= (1 << EXPO_IDX);
+ else
+ gspca_dev->ctrl_inac &= ~(1 << EXPO_IDX);
+ setautogain(gspca_dev);
+ }
+ return gspca_dev->usb_err;
+}
+
+static int sd_getautogain(struct gspca_dev *gspca_dev, __s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ *val = sd->autogain;
+ return 0;
+}
+
+static int sd_setexposure(struct gspca_dev *gspca_dev, __s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->exposure = val;
+ if (gspca_dev->streaming)
+ setexposure(gspca_dev);
+ return gspca_dev->usb_err;
+}
+
+static int sd_getexposure(struct gspca_dev *gspca_dev, __s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ *val = sd->exposure;
+ return 0;
+}
+
+static int sd_setsharpness(struct gspca_dev *gspca_dev, __s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->sharpness = val;
+ if (gspca_dev->streaming)
+ setsharpness(gspca_dev);
+ return gspca_dev->usb_err;
+}
+
+static int sd_getsharpness(struct gspca_dev *gspca_dev, __s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ *val = sd->sharpness;
+ return 0;
+}
+
+static int sd_setsatur(struct gspca_dev *gspca_dev, __s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->satur = val;
+ if (gspca_dev->streaming)
+ setsatur(gspca_dev);
+ return gspca_dev->usb_err;
+}
+
+static int sd_getsatur(struct gspca_dev *gspca_dev, __s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ *val = sd->satur;
+ return 0;
+}
+static int sd_setfreq(struct gspca_dev *gspca_dev, __s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->freq = val;
+ if (gspca_dev->streaming)
+ setfreq(gspca_dev);
+ return gspca_dev->usb_err;
+}
+
+static int sd_getfreq(struct gspca_dev *gspca_dev, __s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ *val = sd->freq;
+ return 0;
+}
+
+static int sd_querymenu(struct gspca_dev *gspca_dev,
+ struct v4l2_querymenu *menu)
+{
+ switch (menu->id) {
+ case V4L2_CID_POWER_LINE_FREQUENCY:
+ switch (menu->index) {
+ case 0: /* V4L2_CID_POWER_LINE_FREQUENCY_DISABLED */
+ strcpy((char *) menu->name, "NoFliker");
+ return 0;
+ case 1: /* V4L2_CID_POWER_LINE_FREQUENCY_50HZ */
+ strcpy((char *) menu->name, "50 Hz");
+ return 0;
+ case 2: /* V4L2_CID_POWER_LINE_FREQUENCY_60HZ */
+ strcpy((char *) menu->name, "60 Hz");
+ return 0;
+ }
+ break;
+ }
+ return -EINVAL;
+}
+
+/* sub-driver description */
+static const struct sd_desc sd_desc = {
+ .name = MODULE_NAME,
+ .ctrls = sd_ctrls,
+ .nctrls = ARRAY_SIZE(sd_ctrls),
+ .config = sd_config,
+ .init = sd_init,
+ .start = sd_start,
+ .stopN = sd_stopN,
+ .pkt_scan = sd_pkt_scan,
+ .querymenu = sd_querymenu,
+};
+
+/* -- module initialisation -- */
+static const __devinitdata struct usb_device_id device_table[] = {
+ {USB_DEVICE(0x06f8, 0x3003)},
+ {}
+};
+
+MODULE_DEVICE_TABLE(usb, device_table);
+
+/* -- device connect -- */
+static int sd_probe(struct usb_interface *intf, const struct usb_device_id *id)
+{
+ return gspca_dev_probe(intf, id, &sd_desc, sizeof(struct sd),
+ THIS_MODULE);
+}
+
+static struct usb_driver sd_driver = {
+ .name = MODULE_NAME,
+ .id_table = device_table,
+ .probe = sd_probe,
+ .disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+ .suspend = gspca_suspend,
+ .resume = gspca_resume,
+#endif
+};
+
+/* -- module insert / remove -- */
+static int __init sd_mod_init(void)
+{
+ int ret;
+
+ ret = usb_register(&sd_driver);
+ if (ret < 0)
+ return ret;
+ PDEBUG(D_PROBE, "registered");
+ return 0;
+}
+
+static void __exit sd_mod_exit(void)
+{
+ usb_deregister(&sd_driver);
+ PDEBUG(D_PROBE, "deregistered");
+}
+
+module_init(sd_mod_init);
+module_exit(sd_mod_exit);
diff --git a/drivers/media/video/gspca/pac207.c b/drivers/media/video/gspca/pac207.c
index 4706a82..0c87c34 100644
--- a/drivers/media/video/gspca/pac207.c
+++ b/drivers/media/video/gspca/pac207.c
@@ -25,6 +25,7 @@
#define MODULE_NAME "pac207"
+#include <linux/input.h>
#include "gspca.h"
MODULE_AUTHOR("Hans de Goede <hdgoede@redhat.com>");
@@ -77,7 +78,7 @@
static int sd_setgain(struct gspca_dev *gspca_dev, __s32 val);
static int sd_getgain(struct gspca_dev *gspca_dev, __s32 *val);
-static struct ctrl sd_ctrls[] = {
+static const struct ctrl sd_ctrls[] = {
#define SD_BRIGHTNESS 0
{
{
@@ -495,6 +496,25 @@
return 0;
}
+#ifdef CONFIG_INPUT
+static int sd_int_pkt_scan(struct gspca_dev *gspca_dev,
+ u8 *data, /* interrupt packet data */
+ int len) /* interrput packet length */
+{
+ int ret = -EINVAL;
+
+ if (len == 2 && data[0] == 0x5a && data[1] == 0x5a) {
+ input_report_key(gspca_dev->input_dev, KEY_CAMERA, 1);
+ input_sync(gspca_dev->input_dev);
+ input_report_key(gspca_dev->input_dev, KEY_CAMERA, 0);
+ input_sync(gspca_dev->input_dev);
+ ret = 0;
+ }
+
+ return ret;
+}
+#endif
+
/* sub-driver description */
static const struct sd_desc sd_desc = {
.name = MODULE_NAME,
@@ -506,6 +526,9 @@
.stopN = sd_stopN,
.dq_callback = pac207_do_auto_gain,
.pkt_scan = sd_pkt_scan,
+#ifdef CONFIG_INPUT
+ .int_pkt_scan = sd_int_pkt_scan,
+#endif
};
/* -- module initialisation -- */
diff --git a/drivers/media/video/gspca/pac7302.c b/drivers/media/video/gspca/pac7302.c
index de0b66c..2a68220 100644
--- a/drivers/media/video/gspca/pac7302.c
+++ b/drivers/media/video/gspca/pac7302.c
@@ -4,7 +4,9 @@
*
* V4L2 by Jean-Francois Moine <http://moinejf.free.fr>
*
- * Separated from Pixart PAC7311 library by Márton Németh <nm127@freemail.hu>
+ * Separated from Pixart PAC7311 library by Márton Németh
+ * Camera button input handling by Márton Németh <nm127@freemail.hu>
+ * Copyright (C) 2009-2010 Márton Németh <nm127@freemail.hu>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -22,33 +24,26 @@
*/
/* Some documentation about various registers as determined by trial and error.
- When the register addresses differ between the 7202 and the 7311 the 2
- different addresses are written as 7302addr/7311addr, when one of the 2
- addresses is a - sign that register description is not valid for the
- matching IC.
Register page 1:
Address Description
- -/0x08 Unknown compressor related, must always be 8 except when not
- in 640x480 resolution and page 4 reg 2 <= 3 then set it to 9 !
- -/0x1b Auto white balance related, bit 0 is AWB enable (inverted)
- bits 345 seem to toggle per color gains on/off (inverted)
0x78 Global control, bit 6 controls the LED (inverted)
- -/0x80 JPEG compression ratio ? Best not touched
- Register page 3/4:
+ Register page 3:
Address Description
- 0x02 Clock divider 2-63, fps =~ 60 / val. Must be a multiple of 3 on
+ 0x02 Clock divider 3-63, fps = 90 / val. Must be a multiple of 3 on
the 7302, so one of 3, 6, 9, ..., except when between 6 and 12?
- -/0x0f Master gain 1-245, low value = high gain
- 0x10/- Master gain 0-31
- -/0x10 Another gain 0-15, limited influence (1-2x gain I guess)
+ 0x03 Variable framerate ctrl reg2==3: 0 -> ~30 fps, 255 -> ~22fps
+ 0x04 Another var framerate ctrl reg2==3, reg3==0: 0 -> ~30 fps,
+ 63 -> ~27 fps, the 2 msb's must always be 1 !!
+ 0x05 Another var framerate ctrl reg2==3, reg3==0, reg4==0xc0:
+ 1 -> ~30 fps, 2 -> ~20 fps
+ 0x0e Exposure bits 0-7, 0-448, 0 = use full frame time
+ 0x0f Exposure bit 8, 0-448, 448 = no exposure at all
+ 0x10 Master gain 0-31
0x21 Bitfield: 0-1 unused, 2-3 vflip/hflip, 4-5 unknown, 6-7 unused
- -/0x27 Seems to toggle various gains on / off, Setting bit 7 seems to
- completely disable the analog amplification block. Set to 0x68
- for max gain, 0x14 for minimal gain.
The registers are accessed in the following functions:
@@ -68,6 +63,7 @@
#define MODULE_NAME "pac7302"
+#include <linux/input.h>
#include <media/v4l2-chip-ident.h>
#include "gspca.h"
@@ -86,8 +82,8 @@
unsigned char red_balance;
unsigned char blue_balance;
unsigned char gain;
- unsigned char exposure;
unsigned char autogain;
+ unsigned short exposure;
__u8 hflip;
__u8 vflip;
u8 flags;
@@ -124,8 +120,7 @@
static int sd_setexposure(struct gspca_dev *gspca_dev, __s32 val);
static int sd_getexposure(struct gspca_dev *gspca_dev, __s32 *val);
-static struct ctrl sd_ctrls[] = {
-/* This control is pac7302 only */
+static const struct ctrl sd_ctrls[] = {
{
{
.id = V4L2_CID_BRIGHTNESS,
@@ -141,7 +136,6 @@
.set = sd_setbrightness,
.get = sd_getbrightness,
},
-/* This control is for both the 7302 and the 7311 */
{
{
.id = V4L2_CID_CONTRAST,
@@ -157,7 +151,6 @@
.set = sd_setcontrast,
.get = sd_getcontrast,
},
-/* This control is pac7302 only */
{
{
.id = V4L2_CID_SATURATION,
@@ -215,7 +208,6 @@
.set = sd_setbluebalance,
.get = sd_getbluebalance,
},
-/* All controls below are for both the 7302 and the 7311 */
{
{
.id = V4L2_CID_GAIN,
@@ -238,11 +230,10 @@
.type = V4L2_CTRL_TYPE_INTEGER,
.name = "Exposure",
.minimum = 0,
-#define EXPOSURE_MAX 255
- .maximum = EXPOSURE_MAX,
+ .maximum = 1023,
.step = 1,
-#define EXPOSURE_DEF 16 /* 32 ms / 30 fps */
-#define EXPOSURE_KNEE 50 /* 100 ms / 10 fps */
+#define EXPOSURE_DEF 66 /* 33 ms / 30 fps */
+#define EXPOSURE_KNEE 133 /* 66 ms / 15 fps */
.default_value = EXPOSURE_DEF,
},
.set = sd_setexposure,
@@ -301,7 +292,6 @@
};
#define LOAD_PAGE3 255
-#define LOAD_PAGE4 254
#define END_OF_SEQUENCE 0
/* pac 7302 */
@@ -379,7 +369,7 @@
#define SKIP 0xaa
/* page 3 - the value SKIP says skip the index - see reg_w_page() */
static const __u8 page3_7302[] = {
- 0x90, 0x40, 0x03, 0x50, 0xc2, 0x01, 0x14, 0x16,
+ 0x90, 0x40, 0x03, 0x00, 0xc0, 0x01, 0x14, 0x16,
0x14, 0x12, 0x00, 0x00, 0x00, 0x02, 0x33, 0x00,
0x0f, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x47, 0x01, 0xb3, 0x01, 0x00,
@@ -388,7 +378,7 @@
0xa4, 0xb8, 0xe0, 0x2a, 0xf6, 0x00, 0x00, 0x00,
0x00, 0x1e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0xfc, 0x00, 0xf2, 0x1f, 0x04, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0xc0, 0xc0, 0x10, 0x00, 0x00,
+ SKIP, 0x00, 0x00, 0xc0, 0xc0, 0x10, 0x00, 0x00,
0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x40, 0xff, 0x03, 0x19, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
@@ -401,12 +391,14 @@
0x00
};
-static int reg_w_buf(struct gspca_dev *gspca_dev,
+static void reg_w_buf(struct gspca_dev *gspca_dev,
__u8 index,
const char *buffer, int len)
{
int ret;
+ if (gspca_dev->usb_err < 0)
+ return;
memcpy(gspca_dev->usb_buf, buffer, len);
ret = usb_control_msg(gspca_dev->dev,
usb_sndctrlpipe(gspca_dev->dev, 0),
@@ -415,20 +407,23 @@
0, /* value */
index, gspca_dev->usb_buf, len,
500);
- if (ret < 0)
+ if (ret < 0) {
PDEBUG(D_ERR, "reg_w_buf(): "
"Failed to write registers to index 0x%x, error %i",
index, ret);
- return ret;
+ gspca_dev->usb_err = ret;
+ }
}
-static int reg_w(struct gspca_dev *gspca_dev,
+static void reg_w(struct gspca_dev *gspca_dev,
__u8 index,
__u8 value)
{
int ret;
+ if (gspca_dev->usb_err < 0)
+ return;
gspca_dev->usb_buf[0] = value;
ret = usb_control_msg(gspca_dev->dev,
usb_sndctrlpipe(gspca_dev->dev, 0),
@@ -436,32 +431,32 @@
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
0, index, gspca_dev->usb_buf, 1,
500);
- if (ret < 0)
+ if (ret < 0) {
PDEBUG(D_ERR, "reg_w(): "
"Failed to write register to index 0x%x, value 0x%x, error %i",
index, value, ret);
- return ret;
+ gspca_dev->usb_err = ret;
+ }
}
-static int reg_w_seq(struct gspca_dev *gspca_dev,
+static void reg_w_seq(struct gspca_dev *gspca_dev,
const __u8 *seq, int len)
{
- int ret = 0;
while (--len >= 0) {
- if (0 <= ret)
- ret = reg_w(gspca_dev, seq[0], seq[1]);
+ reg_w(gspca_dev, seq[0], seq[1]);
seq += 2;
}
- return ret;
}
/* load the beginning of a page */
-static int reg_w_page(struct gspca_dev *gspca_dev,
+static void reg_w_page(struct gspca_dev *gspca_dev,
const __u8 *page, int len)
{
int index;
int ret = 0;
+ if (gspca_dev->usb_err < 0)
+ return;
for (index = 0; index < len; index++) {
if (page[index] == SKIP) /* skip this index */
continue;
@@ -477,56 +472,47 @@
"Failed to write register to index 0x%x, "
"value 0x%x, error %i",
index, page[index], ret);
+ gspca_dev->usb_err = ret;
break;
}
}
- return ret;
}
/* output a variable sequence */
-static int reg_w_var(struct gspca_dev *gspca_dev,
+static void reg_w_var(struct gspca_dev *gspca_dev,
const __u8 *seq,
- const __u8 *page3, unsigned int page3_len,
- const __u8 *page4, unsigned int page4_len)
+ const __u8 *page3, unsigned int page3_len)
{
int index, len;
- int ret = 0;
for (;;) {
index = *seq++;
len = *seq++;
switch (len) {
case END_OF_SEQUENCE:
- return ret;
- case LOAD_PAGE4:
- ret = reg_w_page(gspca_dev, page4, page4_len);
- break;
+ return;
case LOAD_PAGE3:
- ret = reg_w_page(gspca_dev, page3, page3_len);
+ reg_w_page(gspca_dev, page3, page3_len);
break;
default:
if (len > USB_BUF_SZ) {
PDEBUG(D_ERR|D_STREAM,
"Incorrect variable sequence");
- return -EINVAL;
+ return;
}
while (len > 0) {
if (len < 8) {
- ret = reg_w_buf(gspca_dev,
+ reg_w_buf(gspca_dev,
index, seq, len);
- if (ret < 0)
- return ret;
seq += len;
break;
}
- ret = reg_w_buf(gspca_dev, index, seq, 8);
+ reg_w_buf(gspca_dev, index, seq, 8);
seq += 8;
index += 8;
len -= 8;
}
}
- if (ret < 0)
- return ret;
}
/* not reached */
}
@@ -560,11 +546,10 @@
}
/* This function is used by pac7302 only */
-static int setbrightcont(struct gspca_dev *gspca_dev)
+static void setbrightcont(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
int i, v;
- int ret;
static const __u8 max[10] =
{0x29, 0x33, 0x42, 0x5a, 0x6e, 0x80, 0x9f, 0xbb,
0xd4, 0xec};
@@ -572,7 +557,7 @@
{0x35, 0x33, 0x33, 0x2f, 0x2a, 0x25, 0x1e, 0x17,
0x11, 0x0b};
- ret = reg_w(gspca_dev, 0xff, 0x00); /* page 0 */
+ reg_w(gspca_dev, 0xff, 0x00); /* page 0 */
for (i = 0; i < 10; i++) {
v = max[i];
v += (sd->brightness - BRIGHTNESS_MAX)
@@ -582,136 +567,121 @@
v = 0;
else if (v > 0xff)
v = 0xff;
- if (0 <= ret)
- ret = reg_w(gspca_dev, 0xa2 + i, v);
+ reg_w(gspca_dev, 0xa2 + i, v);
}
- if (0 <= ret)
- ret = reg_w(gspca_dev, 0xdc, 0x01);
- return ret;
+ reg_w(gspca_dev, 0xdc, 0x01);
}
/* This function is used by pac7302 only */
-static int setcolors(struct gspca_dev *gspca_dev)
+static void setcolors(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
int i, v;
- int ret;
static const int a[9] =
{217, -212, 0, -101, 170, -67, -38, -315, 355};
static const int b[9] =
{19, 106, 0, 19, 106, 1, 19, 106, 1};
- ret = reg_w(gspca_dev, 0xff, 0x03); /* page 3 */
- if (0 <= ret)
- ret = reg_w(gspca_dev, 0x11, 0x01);
- if (0 <= ret)
- ret = reg_w(gspca_dev, 0xff, 0x00); /* page 0 */
+ reg_w(gspca_dev, 0xff, 0x03); /* page 3 */
+ reg_w(gspca_dev, 0x11, 0x01);
+ reg_w(gspca_dev, 0xff, 0x00); /* page 0 */
for (i = 0; i < 9; i++) {
v = a[i] * sd->colors / COLOR_MAX + b[i];
- if (0 <= ret)
- ret = reg_w(gspca_dev, 0x0f + 2 * i, (v >> 8) & 0x07);
- if (0 <= ret)
- ret = reg_w(gspca_dev, 0x0f + 2 * i + 1, v);
+ reg_w(gspca_dev, 0x0f + 2 * i, (v >> 8) & 0x07);
+ reg_w(gspca_dev, 0x0f + 2 * i + 1, v);
}
- if (0 <= ret)
- ret = reg_w(gspca_dev, 0xdc, 0x01);
+ reg_w(gspca_dev, 0xdc, 0x01);
PDEBUG(D_CONF|D_STREAM, "color: %i", sd->colors);
- return ret;
}
-static int setwhitebalance(struct gspca_dev *gspca_dev)
+static void setwhitebalance(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
- int ret;
- ret = reg_w(gspca_dev, 0xff, 0x00); /* page 0 */
- if (0 <= ret)
- ret = reg_w(gspca_dev, 0xc6, sd->white_balance);
+ reg_w(gspca_dev, 0xff, 0x00); /* page 0 */
+ reg_w(gspca_dev, 0xc6, sd->white_balance);
- if (0 <= ret)
- ret = reg_w(gspca_dev, 0xdc, 0x01);
+ reg_w(gspca_dev, 0xdc, 0x01);
PDEBUG(D_CONF|D_STREAM, "white_balance: %i", sd->white_balance);
- return ret;
}
-static int setredbalance(struct gspca_dev *gspca_dev)
+static void setredbalance(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
- int ret;
- ret = reg_w(gspca_dev, 0xff, 0x00); /* page 0 */
- if (0 <= ret)
- ret = reg_w(gspca_dev, 0xc5, sd->red_balance);
+ reg_w(gspca_dev, 0xff, 0x00); /* page 0 */
+ reg_w(gspca_dev, 0xc5, sd->red_balance);
- if (0 <= ret)
- ret = reg_w(gspca_dev, 0xdc, 0x01);
+ reg_w(gspca_dev, 0xdc, 0x01);
PDEBUG(D_CONF|D_STREAM, "red_balance: %i", sd->red_balance);
- return ret;
}
-static int setbluebalance(struct gspca_dev *gspca_dev)
+static void setbluebalance(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
- int ret;
- ret = reg_w(gspca_dev, 0xff, 0x00); /* page 0 */
- if (0 <= ret)
- ret = reg_w(gspca_dev, 0xc7, sd->blue_balance);
+ reg_w(gspca_dev, 0xff, 0x00); /* page 0 */
+ reg_w(gspca_dev, 0xc7, sd->blue_balance);
- if (0 <= ret)
- ret = reg_w(gspca_dev, 0xdc, 0x01);
+ reg_w(gspca_dev, 0xdc, 0x01);
PDEBUG(D_CONF|D_STREAM, "blue_balance: %i", sd->blue_balance);
- return ret;
}
-static int setgain(struct gspca_dev *gspca_dev)
+static void setgain(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
- int ret;
- ret = reg_w(gspca_dev, 0xff, 0x03); /* page 3 */
- if (0 <= ret)
- ret = reg_w(gspca_dev, 0x10, sd->gain >> 3);
+ reg_w(gspca_dev, 0xff, 0x03); /* page 3 */
+ reg_w(gspca_dev, 0x10, sd->gain >> 3);
/* load registers to sensor (Bit 0, auto clear) */
- if (0 <= ret)
- ret = reg_w(gspca_dev, 0x11, 0x01);
- return ret;
+ reg_w(gspca_dev, 0x11, 0x01);
}
-static int setexposure(struct gspca_dev *gspca_dev)
+static void setexposure(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
- int ret;
- __u8 reg;
+ __u8 clockdiv;
+ __u16 exposure;
- /* register 2 of frame 3/4 contains the clock divider configuring the
- no fps according to the formula: 60 / reg. sd->exposure is the
- desired exposure time in ms. */
- reg = 120 * sd->exposure / 1000;
- if (reg < 2)
- reg = 2;
- else if (reg > 63)
- reg = 63;
+ /* register 2 of frame 3 contains the clock divider configuring the
+ no fps according to the formula: 90 / reg. sd->exposure is the
+ desired exposure time in 0.5 ms. */
+ clockdiv = (90 * sd->exposure + 1999) / 2000;
- /* On the pac7302 reg2 MUST be a multiple of 3, so round it to
- the nearest multiple of 3, except when between 6 and 12? */
- if (reg < 6 || reg > 12)
- reg = ((reg + 1) / 3) * 3;
- ret = reg_w(gspca_dev, 0xff, 0x03); /* page 3 */
- if (0 <= ret)
- ret = reg_w(gspca_dev, 0x02, reg);
+ /* Note clockdiv = 3 also works, but when running at 30 fps, depending
+ on the scene being recorded, the camera switches to another
+ quantization table for certain JPEG blocks, and we don't know how
+ to decompress these blocks. So we cap the framerate at 15 fps */
+ if (clockdiv < 6)
+ clockdiv = 6;
+ else if (clockdiv > 63)
+ clockdiv = 63;
+
+ /* reg2 MUST be a multiple of 3, except when between 6 and 12?
+ Always round up, otherwise we cannot get the desired frametime
+ using the partial frame time exposure control */
+ if (clockdiv < 6 || clockdiv > 12)
+ clockdiv = ((clockdiv + 2) / 3) * 3;
+
+ /* frame exposure time in ms = 1000 * clockdiv / 90 ->
+ exposure = (sd->exposure / 2) * 448 / (1000 * clockdiv / 90) */
+ exposure = (sd->exposure * 45 * 448) / (1000 * clockdiv);
+ /* 0 = use full frametime, 448 = no exposure, reverse it */
+ exposure = 448 - exposure;
+
+ reg_w(gspca_dev, 0xff, 0x03); /* page 3 */
+ reg_w(gspca_dev, 0x02, clockdiv);
+ reg_w(gspca_dev, 0x0e, exposure & 0xff);
+ reg_w(gspca_dev, 0x0f, exposure >> 8);
/* load registers to sensor (Bit 0, auto clear) */
- if (0 <= ret)
- ret = reg_w(gspca_dev, 0x11, 0x01);
- return ret;
+ reg_w(gspca_dev, 0x11, 0x01);
}
-static int sethvflip(struct gspca_dev *gspca_dev)
+static void sethvflip(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
- int ret;
u8 data, hflip, vflip;
hflip = sd->hflip;
@@ -721,48 +691,37 @@
if (sd->flags & FL_VFLIP)
vflip = !vflip;
- ret = reg_w(gspca_dev, 0xff, 0x03); /* page 3 */
+ reg_w(gspca_dev, 0xff, 0x03); /* page 3 */
data = (hflip ? 0x08 : 0x00) | (vflip ? 0x04 : 0x00);
- if (0 <= ret)
- ret = reg_w(gspca_dev, 0x21, data);
+ reg_w(gspca_dev, 0x21, data);
+
/* load registers to sensor (Bit 0, auto clear) */
- if (0 <= ret)
- ret = reg_w(gspca_dev, 0x11, 0x01);
- return ret;
+ reg_w(gspca_dev, 0x11, 0x01);
}
/* this function is called at probe and resume time for pac7302 */
static int sd_init(struct gspca_dev *gspca_dev)
{
- return reg_w_seq(gspca_dev, init_7302, sizeof(init_7302)/2);
+ reg_w_seq(gspca_dev, init_7302, sizeof(init_7302)/2);
+ return gspca_dev->usb_err;
}
static int sd_start(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
- int ret = 0;
sd->sof_read = 0;
- ret = reg_w_var(gspca_dev, start_7302,
- page3_7302, sizeof(page3_7302),
- NULL, 0);
- if (0 <= ret)
- ret = setbrightcont(gspca_dev);
- if (0 <= ret)
- ret = setcolors(gspca_dev);
- if (0 <= ret)
- ret = setwhitebalance(gspca_dev);
- if (0 <= ret)
- ret = setredbalance(gspca_dev);
- if (0 <= ret)
- ret = setbluebalance(gspca_dev);
- if (0 <= ret)
- ret = setgain(gspca_dev);
- if (0 <= ret)
- ret = setexposure(gspca_dev);
- if (0 <= ret)
- ret = sethvflip(gspca_dev);
+ reg_w_var(gspca_dev, start_7302,
+ page3_7302, sizeof(page3_7302));
+ setbrightcont(gspca_dev);
+ setcolors(gspca_dev);
+ setwhitebalance(gspca_dev);
+ setredbalance(gspca_dev);
+ setbluebalance(gspca_dev);
+ setgain(gspca_dev);
+ setexposure(gspca_dev);
+ sethvflip(gspca_dev);
/* only resolution 640x480 is supported for pac7302 */
@@ -771,34 +730,27 @@
atomic_set(&sd->avg_lum, -1);
/* start stream */
- if (0 <= ret)
- ret = reg_w(gspca_dev, 0xff, 0x01);
- if (0 <= ret)
- ret = reg_w(gspca_dev, 0x78, 0x01);
+ reg_w(gspca_dev, 0xff, 0x01);
+ reg_w(gspca_dev, 0x78, 0x01);
- return ret;
+ return gspca_dev->usb_err;
}
static void sd_stopN(struct gspca_dev *gspca_dev)
{
- int ret;
/* stop stream */
- ret = reg_w(gspca_dev, 0xff, 0x01);
- if (0 <= ret)
- ret = reg_w(gspca_dev, 0x78, 0x00);
+ reg_w(gspca_dev, 0xff, 0x01);
+ reg_w(gspca_dev, 0x78, 0x00);
}
/* called on streamoff with alt 0 and on disconnect for pac7302 */
static void sd_stop0(struct gspca_dev *gspca_dev)
{
- int ret;
-
if (!gspca_dev->present)
return;
- ret = reg_w(gspca_dev, 0xff, 0x01);
- if (0 <= ret)
- ret = reg_w(gspca_dev, 0x78, 0x40);
+ reg_w(gspca_dev, 0xff, 0x01);
+ reg_w(gspca_dev, 0x78, 0x40);
}
/* Include pac common sof detection functions */
@@ -808,22 +760,13 @@
{
struct sd *sd = (struct sd *) gspca_dev;
int avg_lum = atomic_read(&sd->avg_lum);
- int desired_lum, deadzone;
+ int desired_lum;
+ const int deadzone = 30;
if (avg_lum == -1)
return;
- desired_lum = 270 + sd->brightness * 4;
- /* Hack hack, with the 7202 the first exposure step is
- pretty large, so if we're about to make the first
- exposure increase make the deadzone large to avoid
- oscilating */
- if (desired_lum > avg_lum && sd->gain == GAIN_DEF &&
- sd->exposure > EXPOSURE_DEF &&
- sd->exposure < 42)
- deadzone = 90;
- else
- deadzone = 30;
+ desired_lum = 270 + sd->brightness;
if (sd->autogain_ignore_frames > 0)
sd->autogain_ignore_frames--;
@@ -947,7 +890,7 @@
sd->brightness = val;
if (gspca_dev->streaming)
setbrightcont(gspca_dev);
- return 0;
+ return gspca_dev->usb_err;
}
static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val)
@@ -966,7 +909,7 @@
if (gspca_dev->streaming) {
setbrightcont(gspca_dev);
}
- return 0;
+ return gspca_dev->usb_err;
}
static int sd_getcontrast(struct gspca_dev *gspca_dev, __s32 *val)
@@ -984,7 +927,7 @@
sd->colors = val;
if (gspca_dev->streaming)
setcolors(gspca_dev);
- return 0;
+ return gspca_dev->usb_err;
}
static int sd_getcolors(struct gspca_dev *gspca_dev, __s32 *val)
@@ -998,14 +941,11 @@
static int sd_setwhitebalance(struct gspca_dev *gspca_dev, __s32 val)
{
struct sd *sd = (struct sd *) gspca_dev;
- int ret = 0;
sd->white_balance = val;
if (gspca_dev->streaming)
- ret = setwhitebalance(gspca_dev);
- if (0 <= ret)
- ret = 0;
- return ret;
+ setwhitebalance(gspca_dev);
+ return gspca_dev->usb_err;
}
static int sd_getwhitebalance(struct gspca_dev *gspca_dev, __s32 *val)
@@ -1019,14 +959,11 @@
static int sd_setredbalance(struct gspca_dev *gspca_dev, __s32 val)
{
struct sd *sd = (struct sd *) gspca_dev;
- int ret = 0;
sd->red_balance = val;
if (gspca_dev->streaming)
- ret = setredbalance(gspca_dev);
- if (0 <= ret)
- ret = 0;
- return ret;
+ setredbalance(gspca_dev);
+ return gspca_dev->usb_err;
}
static int sd_getredbalance(struct gspca_dev *gspca_dev, __s32 *val)
@@ -1040,14 +977,11 @@
static int sd_setbluebalance(struct gspca_dev *gspca_dev, __s32 val)
{
struct sd *sd = (struct sd *) gspca_dev;
- int ret = 0;
sd->blue_balance = val;
if (gspca_dev->streaming)
- ret = setbluebalance(gspca_dev);
- if (0 <= ret)
- ret = 0;
- return ret;
+ setbluebalance(gspca_dev);
+ return gspca_dev->usb_err;
}
static int sd_getbluebalance(struct gspca_dev *gspca_dev, __s32 *val)
@@ -1065,7 +999,7 @@
sd->gain = val;
if (gspca_dev->streaming)
setgain(gspca_dev);
- return 0;
+ return gspca_dev->usb_err;
}
static int sd_getgain(struct gspca_dev *gspca_dev, __s32 *val)
@@ -1083,7 +1017,7 @@
sd->exposure = val;
if (gspca_dev->streaming)
setexposure(gspca_dev);
- return 0;
+ return gspca_dev->usb_err;
}
static int sd_getexposure(struct gspca_dev *gspca_dev, __s32 *val)
@@ -1114,7 +1048,7 @@
}
}
- return 0;
+ return gspca_dev->usb_err;
}
static int sd_getautogain(struct gspca_dev *gspca_dev, __s32 *val)
@@ -1132,7 +1066,7 @@
sd->hflip = val;
if (gspca_dev->streaming)
sethvflip(gspca_dev);
- return 0;
+ return gspca_dev->usb_err;
}
static int sd_gethflip(struct gspca_dev *gspca_dev, __s32 *val)
@@ -1150,7 +1084,7 @@
sd->vflip = val;
if (gspca_dev->streaming)
sethvflip(gspca_dev);
- return 0;
+ return gspca_dev->usb_err;
}
static int sd_getvflip(struct gspca_dev *gspca_dev, __s32 *val)
@@ -1165,7 +1099,6 @@
static int sd_dbg_s_register(struct gspca_dev *gspca_dev,
struct v4l2_dbg_register *reg)
{
- int ret = -EINVAL;
__u8 index;
__u8 value;
@@ -1185,14 +1118,12 @@
/* Note that there shall be no access to other page
by any other function between the page swith and
the actual register write */
- ret = reg_w(gspca_dev, 0xff, 0x00); /* page 0 */
- if (0 <= ret)
- ret = reg_w(gspca_dev, index, value);
+ reg_w(gspca_dev, 0xff, 0x00); /* page 0 */
+ reg_w(gspca_dev, index, value);
- if (0 <= ret)
- ret = reg_w(gspca_dev, 0xdc, 0x01);
+ reg_w(gspca_dev, 0xdc, 0x01);
}
- return ret;
+ return gspca_dev->usb_err;
}
static int sd_chip_ident(struct gspca_dev *gspca_dev,
@@ -1210,8 +1141,39 @@
}
#endif
+#ifdef CONFIG_INPUT
+static int sd_int_pkt_scan(struct gspca_dev *gspca_dev,
+ u8 *data, /* interrupt packet data */
+ int len) /* interrput packet length */
+{
+ int ret = -EINVAL;
+ u8 data0, data1;
+
+ if (len == 2) {
+ data0 = data[0];
+ data1 = data[1];
+ if ((data0 == 0x00 && data1 == 0x11) ||
+ (data0 == 0x22 && data1 == 0x33) ||
+ (data0 == 0x44 && data1 == 0x55) ||
+ (data0 == 0x66 && data1 == 0x77) ||
+ (data0 == 0x88 && data1 == 0x99) ||
+ (data0 == 0xaa && data1 == 0xbb) ||
+ (data0 == 0xcc && data1 == 0xdd) ||
+ (data0 == 0xee && data1 == 0xff)) {
+ input_report_key(gspca_dev->input_dev, KEY_CAMERA, 1);
+ input_sync(gspca_dev->input_dev);
+ input_report_key(gspca_dev->input_dev, KEY_CAMERA, 0);
+ input_sync(gspca_dev->input_dev);
+ ret = 0;
+ }
+ }
+
+ return ret;
+}
+#endif
+
/* sub-driver description for pac7302 */
-static struct sd_desc sd_desc = {
+static const struct sd_desc sd_desc = {
.name = MODULE_NAME,
.ctrls = sd_ctrls,
.nctrls = ARRAY_SIZE(sd_ctrls),
@@ -1226,6 +1188,9 @@
.set_register = sd_dbg_s_register,
.get_chip_ident = sd_chip_ident,
#endif
+#ifdef CONFIG_INPUT
+ .int_pkt_scan = sd_int_pkt_scan,
+#endif
};
/* -- module initialisation -- */
diff --git a/drivers/media/video/gspca/pac7311.c b/drivers/media/video/gspca/pac7311.c
index 42cfcdf..44fed96 100644
--- a/drivers/media/video/gspca/pac7311.c
+++ b/drivers/media/video/gspca/pac7311.c
@@ -51,6 +51,7 @@
#define MODULE_NAME "pac7311"
+#include <linux/input.h>
#include "gspca.h"
MODULE_AUTHOR("Thomas Kaiser thomas@kaiser-linux.li");
@@ -88,7 +89,7 @@
static int sd_setexposure(struct gspca_dev *gspca_dev, __s32 val);
static int sd_getexposure(struct gspca_dev *gspca_dev, __s32 *val);
-static struct ctrl sd_ctrls[] = {
+static const struct ctrl sd_ctrls[] = {
/* This control is for both the 7302 and the 7311 */
{
{
@@ -200,7 +201,6 @@
.priv = 0},
};
-#define LOAD_PAGE3 255
#define LOAD_PAGE4 254
#define END_OF_SEQUENCE 0
@@ -259,12 +259,14 @@
0x23, 0x28, 0x04, 0x11, 0x00, 0x00
};
-static int reg_w_buf(struct gspca_dev *gspca_dev,
+static void reg_w_buf(struct gspca_dev *gspca_dev,
__u8 index,
const char *buffer, int len)
{
int ret;
+ if (gspca_dev->usb_err < 0)
+ return;
memcpy(gspca_dev->usb_buf, buffer, len);
ret = usb_control_msg(gspca_dev->dev,
usb_sndctrlpipe(gspca_dev->dev, 0),
@@ -273,20 +275,23 @@
0, /* value */
index, gspca_dev->usb_buf, len,
500);
- if (ret < 0)
+ if (ret < 0) {
PDEBUG(D_ERR, "reg_w_buf(): "
"Failed to write registers to index 0x%x, error %i",
index, ret);
- return ret;
+ gspca_dev->usb_err = ret;
+ }
}
-static int reg_w(struct gspca_dev *gspca_dev,
+static void reg_w(struct gspca_dev *gspca_dev,
__u8 index,
__u8 value)
{
int ret;
+ if (gspca_dev->usb_err < 0)
+ return;
gspca_dev->usb_buf[0] = value;
ret = usb_control_msg(gspca_dev->dev,
usb_sndctrlpipe(gspca_dev->dev, 0),
@@ -294,32 +299,32 @@
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
0, index, gspca_dev->usb_buf, 1,
500);
- if (ret < 0)
+ if (ret < 0) {
PDEBUG(D_ERR, "reg_w(): "
"Failed to write register to index 0x%x, value 0x%x, error %i",
index, value, ret);
- return ret;
+ gspca_dev->usb_err = ret;
+ }
}
-static int reg_w_seq(struct gspca_dev *gspca_dev,
+static void reg_w_seq(struct gspca_dev *gspca_dev,
const __u8 *seq, int len)
{
- int ret = 0;
while (--len >= 0) {
- if (0 <= ret)
- ret = reg_w(gspca_dev, seq[0], seq[1]);
+ reg_w(gspca_dev, seq[0], seq[1]);
seq += 2;
}
- return ret;
}
/* load the beginning of a page */
-static int reg_w_page(struct gspca_dev *gspca_dev,
+static void reg_w_page(struct gspca_dev *gspca_dev,
const __u8 *page, int len)
{
int index;
int ret = 0;
+ if (gspca_dev->usb_err < 0)
+ return;
for (index = 0; index < len; index++) {
if (page[index] == SKIP) /* skip this index */
continue;
@@ -335,56 +340,47 @@
"Failed to write register to index 0x%x, "
"value 0x%x, error %i",
index, page[index], ret);
+ gspca_dev->usb_err = ret;
break;
}
}
- return ret;
}
/* output a variable sequence */
-static int reg_w_var(struct gspca_dev *gspca_dev,
+static void reg_w_var(struct gspca_dev *gspca_dev,
const __u8 *seq,
- const __u8 *page3, unsigned int page3_len,
const __u8 *page4, unsigned int page4_len)
{
int index, len;
- int ret = 0;
for (;;) {
index = *seq++;
len = *seq++;
switch (len) {
case END_OF_SEQUENCE:
- return ret;
+ return;
case LOAD_PAGE4:
- ret = reg_w_page(gspca_dev, page4, page4_len);
- break;
- case LOAD_PAGE3:
- ret = reg_w_page(gspca_dev, page3, page3_len);
+ reg_w_page(gspca_dev, page4, page4_len);
break;
default:
if (len > USB_BUF_SZ) {
PDEBUG(D_ERR|D_STREAM,
"Incorrect variable sequence");
- return -EINVAL;
+ return;
}
while (len > 0) {
if (len < 8) {
- ret = reg_w_buf(gspca_dev,
+ reg_w_buf(gspca_dev,
index, seq, len);
- if (ret < 0)
- return ret;
seq += len;
break;
}
- ret = reg_w_buf(gspca_dev, index, seq, 8);
+ reg_w_buf(gspca_dev, index, seq, 8);
seq += 8;
index += 8;
len -= 8;
}
}
- if (ret < 0)
- return ret;
}
/* not reached */
}
@@ -412,46 +408,36 @@
}
/* This function is used by pac7311 only */
-static int setcontrast(struct gspca_dev *gspca_dev)
+static void setcontrast(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
- int ret;
- ret = reg_w(gspca_dev, 0xff, 0x04);
- if (0 <= ret)
- ret = reg_w(gspca_dev, 0x10, sd->contrast >> 4);
+ reg_w(gspca_dev, 0xff, 0x04);
+ reg_w(gspca_dev, 0x10, sd->contrast >> 4);
/* load registers to sensor (Bit 0, auto clear) */
- if (0 <= ret)
- ret = reg_w(gspca_dev, 0x11, 0x01);
- return ret;
+ reg_w(gspca_dev, 0x11, 0x01);
}
-static int setgain(struct gspca_dev *gspca_dev)
+static void setgain(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
int gain = GAIN_MAX - sd->gain;
- int ret;
if (gain < 1)
gain = 1;
else if (gain > 245)
gain = 245;
- ret = reg_w(gspca_dev, 0xff, 0x04); /* page 4 */
- if (0 <= ret)
- ret = reg_w(gspca_dev, 0x0e, 0x00);
- if (0 <= ret)
- ret = reg_w(gspca_dev, 0x0f, gain);
+ reg_w(gspca_dev, 0xff, 0x04); /* page 4 */
+ reg_w(gspca_dev, 0x0e, 0x00);
+ reg_w(gspca_dev, 0x0f, gain);
/* load registers to sensor (Bit 0, auto clear) */
- if (0 <= ret)
- ret = reg_w(gspca_dev, 0x11, 0x01);
- return ret;
+ reg_w(gspca_dev, 0x11, 0x01);
}
-static int setexposure(struct gspca_dev *gspca_dev)
+static void setexposure(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
- int ret;
__u8 reg;
/* register 2 of frame 3/4 contains the clock divider configuring the
@@ -463,94 +449,72 @@
else if (reg > 63)
reg = 63;
- ret = reg_w(gspca_dev, 0xff, 0x04); /* page 4 */
- if (0 <= ret)
- ret = reg_w(gspca_dev, 0x02, reg);
+ reg_w(gspca_dev, 0xff, 0x04); /* page 4 */
+ reg_w(gspca_dev, 0x02, reg);
+
/* Page 1 register 8 must always be 0x08 except when not in
640x480 mode and Page3/4 reg 2 <= 3 then it must be 9 */
- if (0 <= ret)
- ret = reg_w(gspca_dev, 0xff, 0x01);
+ reg_w(gspca_dev, 0xff, 0x01);
if (gspca_dev->cam.cam_mode[(int)gspca_dev->curr_mode].priv &&
reg <= 3) {
- if (0 <= ret)
- ret = reg_w(gspca_dev, 0x08, 0x09);
+ reg_w(gspca_dev, 0x08, 0x09);
} else {
- if (0 <= ret)
- ret = reg_w(gspca_dev, 0x08, 0x08);
+ reg_w(gspca_dev, 0x08, 0x08);
}
/* load registers to sensor (Bit 0, auto clear) */
- if (0 <= ret)
- ret = reg_w(gspca_dev, 0x11, 0x01);
- return ret;
+ reg_w(gspca_dev, 0x11, 0x01);
}
-static int sethvflip(struct gspca_dev *gspca_dev)
+static void sethvflip(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
- int ret;
__u8 data;
- ret = reg_w(gspca_dev, 0xff, 0x04); /* page 4 */
+ reg_w(gspca_dev, 0xff, 0x04); /* page 4 */
data = (sd->hflip ? 0x04 : 0x00) | (sd->vflip ? 0x08 : 0x00);
- if (0 <= ret)
- ret = reg_w(gspca_dev, 0x21, data);
+ reg_w(gspca_dev, 0x21, data);
+
/* load registers to sensor (Bit 0, auto clear) */
- if (0 <= ret)
- ret = reg_w(gspca_dev, 0x11, 0x01);
- return ret;
+ reg_w(gspca_dev, 0x11, 0x01);
}
/* this function is called at probe and resume time for pac7311 */
static int sd_init(struct gspca_dev *gspca_dev)
{
- return reg_w_seq(gspca_dev, init_7311, sizeof(init_7311)/2);
+ reg_w_seq(gspca_dev, init_7311, sizeof(init_7311)/2);
+ return gspca_dev->usb_err;
}
static int sd_start(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
- int ret;
sd->sof_read = 0;
- ret = reg_w_var(gspca_dev, start_7311,
- NULL, 0,
+ reg_w_var(gspca_dev, start_7311,
page4_7311, sizeof(page4_7311));
- if (0 <= ret)
- ret = setcontrast(gspca_dev);
- if (0 <= ret)
- ret = setgain(gspca_dev);
- if (0 <= ret)
- ret = setexposure(gspca_dev);
- if (0 <= ret)
- ret = sethvflip(gspca_dev);
+ setcontrast(gspca_dev);
+ setgain(gspca_dev);
+ setexposure(gspca_dev);
+ sethvflip(gspca_dev);
/* set correct resolution */
switch (gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv) {
case 2: /* 160x120 pac7311 */
- if (0 <= ret)
- ret = reg_w(gspca_dev, 0xff, 0x01);
- if (0 <= ret)
- ret = reg_w(gspca_dev, 0x17, 0x20);
- if (0 <= ret)
- ret = reg_w(gspca_dev, 0x87, 0x10);
+ reg_w(gspca_dev, 0xff, 0x01);
+ reg_w(gspca_dev, 0x17, 0x20);
+ reg_w(gspca_dev, 0x87, 0x10);
break;
case 1: /* 320x240 pac7311 */
- if (0 <= ret)
- ret = reg_w(gspca_dev, 0xff, 0x01);
- if (0 <= ret)
- ret = reg_w(gspca_dev, 0x17, 0x30);
- if (0 <= ret)
- ret = reg_w(gspca_dev, 0x87, 0x11);
+ reg_w(gspca_dev, 0xff, 0x01);
+ reg_w(gspca_dev, 0x17, 0x30);
+ reg_w(gspca_dev, 0x87, 0x11);
break;
case 0: /* 640x480 */
- if (0 <= ret)
- ret = reg_w(gspca_dev, 0xff, 0x01);
- if (0 <= ret)
- ret = reg_w(gspca_dev, 0x17, 0x00);
- if (0 <= ret)
- ret = reg_w(gspca_dev, 0x87, 0x12);
+ reg_w(gspca_dev, 0xff, 0x01);
+ reg_w(gspca_dev, 0x17, 0x00);
+ reg_w(gspca_dev, 0x87, 0x12);
break;
}
@@ -559,37 +523,24 @@
atomic_set(&sd->avg_lum, -1);
/* start stream */
- if (0 <= ret)
- ret = reg_w(gspca_dev, 0xff, 0x01);
- if (0 <= ret)
- ret = reg_w(gspca_dev, 0x78, 0x05);
+ reg_w(gspca_dev, 0xff, 0x01);
+ reg_w(gspca_dev, 0x78, 0x05);
- return ret;
+ return gspca_dev->usb_err;
}
static void sd_stopN(struct gspca_dev *gspca_dev)
{
- int ret;
-
- ret = reg_w(gspca_dev, 0xff, 0x04);
- if (0 <= ret)
- ret = reg_w(gspca_dev, 0x27, 0x80);
- if (0 <= ret)
- ret = reg_w(gspca_dev, 0x28, 0xca);
- if (0 <= ret)
- ret = reg_w(gspca_dev, 0x29, 0x53);
- if (0 <= ret)
- ret = reg_w(gspca_dev, 0x2a, 0x0e);
- if (0 <= ret)
- ret = reg_w(gspca_dev, 0xff, 0x01);
- if (0 <= ret)
- ret = reg_w(gspca_dev, 0x3e, 0x20);
- if (0 <= ret)
- ret = reg_w(gspca_dev, 0x78, 0x44); /* Bit_0=start stream, Bit_6=LED */
- if (0 <= ret)
- ret = reg_w(gspca_dev, 0x78, 0x44); /* Bit_0=start stream, Bit_6=LED */
- if (0 <= ret)
- ret = reg_w(gspca_dev, 0x78, 0x44); /* Bit_0=start stream, Bit_6=LED */
+ reg_w(gspca_dev, 0xff, 0x04);
+ reg_w(gspca_dev, 0x27, 0x80);
+ reg_w(gspca_dev, 0x28, 0xca);
+ reg_w(gspca_dev, 0x29, 0x53);
+ reg_w(gspca_dev, 0x2a, 0x0e);
+ reg_w(gspca_dev, 0xff, 0x01);
+ reg_w(gspca_dev, 0x3e, 0x20);
+ reg_w(gspca_dev, 0x78, 0x44); /* Bit_0=start stream, Bit_6=LED */
+ reg_w(gspca_dev, 0x78, 0x44); /* Bit_0=start stream, Bit_6=LED */
+ reg_w(gspca_dev, 0x78, 0x44); /* Bit_0=start stream, Bit_6=LED */
}
/* called on streamoff with alt 0 and on disconnect for 7311 */
@@ -734,7 +685,7 @@
if (gspca_dev->streaming) {
setcontrast(gspca_dev);
}
- return 0;
+ return gspca_dev->usb_err;
}
static int sd_getcontrast(struct gspca_dev *gspca_dev, __s32 *val)
@@ -752,7 +703,7 @@
sd->gain = val;
if (gspca_dev->streaming)
setgain(gspca_dev);
- return 0;
+ return gspca_dev->usb_err;
}
static int sd_getgain(struct gspca_dev *gspca_dev, __s32 *val)
@@ -770,7 +721,7 @@
sd->exposure = val;
if (gspca_dev->streaming)
setexposure(gspca_dev);
- return 0;
+ return gspca_dev->usb_err;
}
static int sd_getexposure(struct gspca_dev *gspca_dev, __s32 *val)
@@ -801,7 +752,7 @@
}
}
- return 0;
+ return gspca_dev->usb_err;
}
static int sd_getautogain(struct gspca_dev *gspca_dev, __s32 *val)
@@ -819,7 +770,7 @@
sd->hflip = val;
if (gspca_dev->streaming)
sethvflip(gspca_dev);
- return 0;
+ return gspca_dev->usb_err;
}
static int sd_gethflip(struct gspca_dev *gspca_dev, __s32 *val)
@@ -837,7 +788,7 @@
sd->vflip = val;
if (gspca_dev->streaming)
sethvflip(gspca_dev);
- return 0;
+ return gspca_dev->usb_err;
}
static int sd_getvflip(struct gspca_dev *gspca_dev, __s32 *val)
@@ -848,8 +799,39 @@
return 0;
}
+#ifdef CONFIG_INPUT
+static int sd_int_pkt_scan(struct gspca_dev *gspca_dev,
+ u8 *data, /* interrupt packet data */
+ int len) /* interrupt packet length */
+{
+ int ret = -EINVAL;
+ u8 data0, data1;
+
+ if (len == 2) {
+ data0 = data[0];
+ data1 = data[1];
+ if ((data0 == 0x00 && data1 == 0x11) ||
+ (data0 == 0x22 && data1 == 0x33) ||
+ (data0 == 0x44 && data1 == 0x55) ||
+ (data0 == 0x66 && data1 == 0x77) ||
+ (data0 == 0x88 && data1 == 0x99) ||
+ (data0 == 0xaa && data1 == 0xbb) ||
+ (data0 == 0xcc && data1 == 0xdd) ||
+ (data0 == 0xee && data1 == 0xff)) {
+ input_report_key(gspca_dev->input_dev, KEY_CAMERA, 1);
+ input_sync(gspca_dev->input_dev);
+ input_report_key(gspca_dev->input_dev, KEY_CAMERA, 0);
+ input_sync(gspca_dev->input_dev);
+ ret = 0;
+ }
+ }
+
+ return ret;
+}
+#endif
+
/* sub-driver description for pac7311 */
-static struct sd_desc sd_desc = {
+static const struct sd_desc sd_desc = {
.name = MODULE_NAME,
.ctrls = sd_ctrls,
.nctrls = ARRAY_SIZE(sd_ctrls),
@@ -860,6 +842,9 @@
.stop0 = sd_stop0,
.pkt_scan = sd_pkt_scan,
.dq_callback = do_autogain,
+#ifdef CONFIG_INPUT
+ .int_pkt_scan = sd_int_pkt_scan,
+#endif
};
/* -- module initialisation -- */
diff --git a/drivers/media/video/gspca/pac_common.h b/drivers/media/video/gspca/pac_common.h
index 20f67d9..8462a7c 100644
--- a/drivers/media/video/gspca/pac_common.h
+++ b/drivers/media/video/gspca/pac_common.h
@@ -24,11 +24,10 @@
*/
/* We calculate the autogain at the end of the transfer of a frame, at this
- moment a frame with the old settings is being transmitted, and a frame is
- being captured with the old settings. So if we adjust the autogain we must
- ignore atleast the 2 next frames for the new settings to come into effect
- before doing any other adjustments */
-#define PAC_AUTOGAIN_IGNORE_FRAMES 3
+ moment a frame with the old settings is being captured and transmitted. So
+ if we adjust the gain or exposure we must ignore atleast the next frame for
+ the new settings to come into effect before doing any other adjustments. */
+#define PAC_AUTOGAIN_IGNORE_FRAMES 2
static const unsigned char pac_sof_marker[5] =
{ 0xff, 0xff, 0x00, 0xff, 0x96 };
diff --git a/drivers/media/video/gspca/sn9c2028.c b/drivers/media/video/gspca/sn9c2028.c
new file mode 100644
index 0000000..dda5fd4
--- /dev/null
+++ b/drivers/media/video/gspca/sn9c2028.c
@@ -0,0 +1,757 @@
+/*
+ * SN9C2028 library
+ *
+ * Copyright (C) 2009 Theodore Kilgore <kilgota@auburn.edu>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#define MODULE_NAME "sn9c2028"
+
+#include "gspca.h"
+
+MODULE_AUTHOR("Theodore Kilgore");
+MODULE_DESCRIPTION("Sonix SN9C2028 USB Camera Driver");
+MODULE_LICENSE("GPL");
+
+/* specific webcam descriptor */
+struct sd {
+ struct gspca_dev gspca_dev; /* !! must be the first item */
+ u8 sof_read;
+ u16 model;
+};
+
+struct init_command {
+ unsigned char instruction[6];
+ unsigned char to_read; /* length to read. 0 means no reply requested */
+};
+
+/* V4L2 controls supported by the driver */
+static struct ctrl sd_ctrls[] = {
+};
+
+/* How to change the resolution of any of the VGA cams is unknown */
+static const struct v4l2_pix_format vga_mode[] = {
+ {640, 480, V4L2_PIX_FMT_SN9C2028, V4L2_FIELD_NONE,
+ .bytesperline = 640,
+ .sizeimage = 640 * 480 * 3 / 4,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .priv = 0},
+};
+
+/* No way to change the resolution of the CIF cams is known */
+static const struct v4l2_pix_format cif_mode[] = {
+ {352, 288, V4L2_PIX_FMT_SN9C2028, V4L2_FIELD_NONE,
+ .bytesperline = 352,
+ .sizeimage = 352 * 288 * 3 / 4,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .priv = 0},
+};
+
+/* the bytes to write are in gspca_dev->usb_buf */
+static int sn9c2028_command(struct gspca_dev *gspca_dev, u8 *command)
+{
+ int rc;
+
+ PDEBUG(D_USBO, "sending command %02x%02x%02x%02x%02x%02x", command[0],
+ command[1], command[2], command[3], command[4], command[5]);
+
+ memcpy(gspca_dev->usb_buf, command, 6);
+ rc = usb_control_msg(gspca_dev->dev,
+ usb_sndctrlpipe(gspca_dev->dev, 0),
+ USB_REQ_GET_CONFIGURATION,
+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
+ 2, 0, gspca_dev->usb_buf, 6, 500);
+ if (rc < 0) {
+ PDEBUG(D_ERR, "command write [%02x] error %d",
+ gspca_dev->usb_buf[0], rc);
+ return rc;
+ }
+
+ return 0;
+}
+
+static int sn9c2028_read1(struct gspca_dev *gspca_dev)
+{
+ int rc;
+
+ rc = usb_control_msg(gspca_dev->dev,
+ usb_rcvctrlpipe(gspca_dev->dev, 0),
+ USB_REQ_GET_STATUS,
+ USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
+ 1, 0, gspca_dev->usb_buf, 1, 500);
+ if (rc != 1) {
+ PDEBUG(D_ERR, "read1 error %d", rc);
+ return (rc < 0) ? rc : -EIO;
+ }
+ PDEBUG(D_USBI, "read1 response %02x", gspca_dev->usb_buf[0]);
+ return gspca_dev->usb_buf[0];
+}
+
+static int sn9c2028_read4(struct gspca_dev *gspca_dev, u8 *reading)
+{
+ int rc;
+ rc = usb_control_msg(gspca_dev->dev,
+ usb_rcvctrlpipe(gspca_dev->dev, 0),
+ USB_REQ_GET_STATUS,
+ USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
+ 4, 0, gspca_dev->usb_buf, 4, 500);
+ if (rc != 4) {
+ PDEBUG(D_ERR, "read4 error %d", rc);
+ return (rc < 0) ? rc : -EIO;
+ }
+ memcpy(reading, gspca_dev->usb_buf, 4);
+ PDEBUG(D_USBI, "read4 response %02x%02x%02x%02x", reading[0],
+ reading[1], reading[2], reading[3]);
+ return rc;
+}
+
+static int sn9c2028_long_command(struct gspca_dev *gspca_dev, u8 *command)
+{
+ int i, status;
+ __u8 reading[4];
+
+ status = sn9c2028_command(gspca_dev, command);
+ if (status < 0)
+ return status;
+
+ status = -1;
+ for (i = 0; i < 256 && status < 2; i++)
+ status = sn9c2028_read1(gspca_dev);
+ if (status != 2) {
+ PDEBUG(D_ERR, "long command status read error %d", status);
+ return (status < 0) ? status : -EIO;
+ }
+
+ memset(reading, 0, 4);
+ status = sn9c2028_read4(gspca_dev, reading);
+ if (status < 0)
+ return status;
+
+ /* in general, the first byte of the response is the first byte of
+ * the command, or'ed with 8 */
+ status = sn9c2028_read1(gspca_dev);
+ if (status < 0)
+ return status;
+
+ return 0;
+}
+
+static int sn9c2028_short_command(struct gspca_dev *gspca_dev, u8 *command)
+{
+ int err_code;
+
+ err_code = sn9c2028_command(gspca_dev, command);
+ if (err_code < 0)
+ return err_code;
+
+ err_code = sn9c2028_read1(gspca_dev);
+ if (err_code < 0)
+ return err_code;
+
+ return 0;
+}
+
+/* this function is called at probe time */
+static int sd_config(struct gspca_dev *gspca_dev,
+ const struct usb_device_id *id)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ struct cam *cam = &gspca_dev->cam;
+
+ PDEBUG(D_PROBE, "SN9C2028 camera detected (vid/pid 0x%04X:0x%04X)",
+ id->idVendor, id->idProduct);
+
+ sd->model = id->idProduct;
+
+ switch (sd->model) {
+ case 0x7005:
+ PDEBUG(D_PROBE, "Genius Smart 300 camera");
+ break;
+ case 0x8000:
+ PDEBUG(D_PROBE, "DC31VC");
+ break;
+ case 0x8001:
+ PDEBUG(D_PROBE, "Spy camera");
+ break;
+ case 0x8003:
+ PDEBUG(D_PROBE, "CIF camera");
+ break;
+ case 0x8008:
+ PDEBUG(D_PROBE, "Mini-Shotz ms-350 camera");
+ break;
+ case 0x800a:
+ PDEBUG(D_PROBE, "Vivitar 3350b type camera");
+ cam->input_flags = V4L2_IN_ST_VFLIP | V4L2_IN_ST_HFLIP;
+ break;
+ }
+
+ switch (sd->model) {
+ case 0x8000:
+ case 0x8001:
+ case 0x8003:
+ cam->cam_mode = cif_mode;
+ cam->nmodes = ARRAY_SIZE(cif_mode);
+ break;
+ default:
+ cam->cam_mode = vga_mode;
+ cam->nmodes = ARRAY_SIZE(vga_mode);
+ }
+ return 0;
+}
+
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
+{
+ int status = -1;
+
+ sn9c2028_read1(gspca_dev);
+ sn9c2028_read1(gspca_dev);
+ status = sn9c2028_read1(gspca_dev);
+
+ return (status < 0) ? status : 0;
+}
+
+static int run_start_commands(struct gspca_dev *gspca_dev,
+ struct init_command *cam_commands, int n)
+{
+ int i, err_code = -1;
+
+ for (i = 0; i < n; i++) {
+ switch (cam_commands[i].to_read) {
+ case 4:
+ err_code = sn9c2028_long_command(gspca_dev,
+ cam_commands[i].instruction);
+ break;
+ case 1:
+ err_code = sn9c2028_short_command(gspca_dev,
+ cam_commands[i].instruction);
+ break;
+ case 0:
+ err_code = sn9c2028_command(gspca_dev,
+ cam_commands[i].instruction);
+ break;
+ }
+ if (err_code < 0)
+ return err_code;
+ }
+ return 0;
+}
+
+static int start_spy_cam(struct gspca_dev *gspca_dev)
+{
+ struct init_command spy_start_commands[] = {
+ {{0x0c, 0x01, 0x00, 0x00, 0x00, 0x00}, 4},
+ {{0x13, 0x20, 0x01, 0x00, 0x00, 0x00}, 4},
+ {{0x13, 0x21, 0x01, 0x00, 0x00, 0x00}, 4},
+ {{0x13, 0x22, 0x01, 0x04, 0x00, 0x00}, 4},
+ {{0x13, 0x23, 0x01, 0x03, 0x00, 0x00}, 4},
+ {{0x13, 0x24, 0x01, 0x00, 0x00, 0x00}, 4},
+ {{0x13, 0x25, 0x01, 0x16, 0x00, 0x00}, 4}, /* width 352 */
+ {{0x13, 0x26, 0x01, 0x12, 0x00, 0x00}, 4}, /* height 288 */
+ /* {{0x13, 0x27, 0x01, 0x28, 0x00, 0x00}, 4}, */
+ {{0x13, 0x27, 0x01, 0x68, 0x00, 0x00}, 4},
+ {{0x13, 0x28, 0x01, 0x09, 0x00, 0x00}, 4}, /* red gain ?*/
+ /* {{0x13, 0x28, 0x01, 0x00, 0x00, 0x00}, 4}, */
+ {{0x13, 0x29, 0x01, 0x00, 0x00, 0x00}, 4},
+ /* {{0x13, 0x29, 0x01, 0x0c, 0x00, 0x00}, 4}, */
+ {{0x13, 0x2a, 0x01, 0x00, 0x00, 0x00}, 4},
+ {{0x13, 0x2b, 0x01, 0x00, 0x00, 0x00}, 4},
+ /* {{0x13, 0x2c, 0x01, 0x02, 0x00, 0x00}, 4}, */
+ {{0x13, 0x2c, 0x01, 0x02, 0x00, 0x00}, 4},
+ {{0x13, 0x2d, 0x01, 0x02, 0x00, 0x00}, 4},
+ /* {{0x13, 0x2e, 0x01, 0x09, 0x00, 0x00}, 4}, */
+ {{0x13, 0x2e, 0x01, 0x09, 0x00, 0x00}, 4},
+ {{0x13, 0x2f, 0x01, 0x07, 0x00, 0x00}, 4},
+ {{0x12, 0x34, 0x01, 0x00, 0x00, 0x00}, 4},
+ {{0x13, 0x34, 0x01, 0xa1, 0x00, 0x00}, 4},
+ {{0x13, 0x35, 0x01, 0x00, 0x00, 0x00}, 4},
+ {{0x11, 0x02, 0x06, 0x00, 0x00, 0x00}, 4},
+ {{0x11, 0x03, 0x13, 0x00, 0x00, 0x00}, 4}, /*don't mess with*/
+ /*{{0x11, 0x04, 0x06, 0x00, 0x00, 0x00}, 4}, observed */
+ {{0x11, 0x04, 0x00, 0x00, 0x00, 0x00}, 4}, /* brighter */
+ /*{{0x11, 0x05, 0x65, 0x00, 0x00, 0x00}, 4}, observed */
+ {{0x11, 0x05, 0x00, 0x00, 0x00, 0x00}, 4}, /* brighter */
+ {{0x11, 0x06, 0xb1, 0x00, 0x00, 0x00}, 4}, /* observed */
+ {{0x11, 0x07, 0x00, 0x00, 0x00, 0x00}, 4},
+ /*{{0x11, 0x08, 0x06, 0x00, 0x00, 0x00}, 4}, observed */
+ {{0x11, 0x08, 0x0b, 0x00, 0x00, 0x00}, 4},
+ {{0x11, 0x09, 0x01, 0x00, 0x00, 0x00}, 4},
+ {{0x11, 0x0a, 0x01, 0x00, 0x00, 0x00}, 4},
+ {{0x11, 0x0b, 0x01, 0x00, 0x00, 0x00}, 4},
+ {{0x11, 0x0c, 0x01, 0x00, 0x00, 0x00}, 4},
+ {{0x11, 0x0d, 0x00, 0x00, 0x00, 0x00}, 4},
+ {{0x11, 0x0e, 0x04, 0x00, 0x00, 0x00}, 4},
+ /* {{0x11, 0x0f, 0x00, 0x00, 0x00, 0x00}, 4}, */
+ /* brightness or gain. 0 is default. 4 is good
+ * indoors at night with incandescent lighting */
+ {{0x11, 0x0f, 0x04, 0x00, 0x00, 0x00}, 4},
+ {{0x11, 0x10, 0x06, 0x00, 0x00, 0x00}, 4}, /*hstart or hoffs*/
+ {{0x11, 0x11, 0x06, 0x00, 0x00, 0x00}, 4},
+ {{0x11, 0x12, 0x00, 0x00, 0x00, 0x00}, 4},
+ {{0x11, 0x14, 0x02, 0x00, 0x00, 0x00}, 4},
+ {{0x11, 0x13, 0x01, 0x00, 0x00, 0x00}, 4},
+ /* {{0x1b, 0x02, 0x06, 0x00, 0x00, 0x00}, 1}, observed */
+ {{0x1b, 0x02, 0x11, 0x00, 0x00, 0x00}, 1}, /* brighter */
+ /* {{0x1b, 0x13, 0x01, 0x00, 0x00, 0x00}, 1}, observed */
+ {{0x1b, 0x13, 0x11, 0x00, 0x00, 0x00}, 1},
+ {{0x20, 0x34, 0xa1, 0x00, 0x00, 0x00}, 1}, /* compresses */
+ /* Camera should start to capture now. */
+ };
+
+ return run_start_commands(gspca_dev, spy_start_commands,
+ ARRAY_SIZE(spy_start_commands));
+}
+
+static int start_cif_cam(struct gspca_dev *gspca_dev)
+{
+ struct init_command cif_start_commands[] = {
+ {{0x0c, 0x01, 0x00, 0x00, 0x00, 0x00}, 4},
+ /* The entire sequence below seems redundant */
+ /* {{0x13, 0x20, 0x01, 0x00, 0x00, 0x00}, 4},
+ {{0x13, 0x21, 0x01, 0x00, 0x00, 0x00}, 4},
+ {{0x13, 0x22, 0x01, 0x06, 0x00, 0x00}, 4},
+ {{0x13, 0x23, 0x01, 0x02, 0x00, 0x00}, 4},
+ {{0x13, 0x24, 0x01, 0x00, 0x00, 0x00}, 4},
+ {{0x13, 0x25, 0x01, 0x16, 0x00, 0x00}, 4}, width?
+ {{0x13, 0x26, 0x01, 0x12, 0x00, 0x00}, 4}, height?
+ {{0x13, 0x27, 0x01, 0x68, 0x00, 0x00}, 4}, subsample?
+ {{0x13, 0x28, 0x01, 0x00, 0x00, 0x00}, 4},
+ {{0x13, 0x29, 0x01, 0x20, 0x00, 0x00}, 4},
+ {{0x13, 0x2a, 0x01, 0x00, 0x00, 0x00}, 4},
+ {{0x13, 0x2b, 0x01, 0x00, 0x00, 0x00}, 4},
+ {{0x13, 0x2c, 0x01, 0x02, 0x00, 0x00}, 4},
+ {{0x13, 0x2d, 0x01, 0x03, 0x00, 0x00}, 4},
+ {{0x13, 0x2e, 0x01, 0x0f, 0x00, 0x00}, 4},
+ {{0x13, 0x2f, 0x01, 0x0c, 0x00, 0x00}, 4},
+ {{0x12, 0x34, 0x01, 0x00, 0x00, 0x00}, 4},
+ {{0x13, 0x34, 0x01, 0xa1, 0x00, 0x00}, 4},
+ {{0x13, 0x35, 0x01, 0x00, 0x00, 0x00}, 4},*/
+ {{0x1b, 0x21, 0x00, 0x00, 0x00, 0x00}, 1},
+ {{0x1b, 0x17, 0x00, 0x00, 0x00, 0x00}, 1},
+ {{0x1b, 0x19, 0x00, 0x00, 0x00, 0x00}, 1},
+ {{0x1b, 0x02, 0x06, 0x00, 0x00, 0x00}, 1},
+ {{0x1b, 0x03, 0x5a, 0x00, 0x00, 0x00}, 1},
+ {{0x1b, 0x04, 0x27, 0x00, 0x00, 0x00}, 1},
+ {{0x1b, 0x05, 0x01, 0x00, 0x00, 0x00}, 1},
+ {{0x1b, 0x12, 0x14, 0x00, 0x00, 0x00}, 1},
+ {{0x1b, 0x13, 0x00, 0x00, 0x00, 0x00}, 1},
+ {{0x1b, 0x14, 0x00, 0x00, 0x00, 0x00}, 1},
+ {{0x1b, 0x15, 0x00, 0x00, 0x00, 0x00}, 1},
+ {{0x1b, 0x16, 0x00, 0x00, 0x00, 0x00}, 1},
+ {{0x1b, 0x77, 0xa2, 0x00, 0x00, 0x00}, 1},
+ {{0x1b, 0x06, 0x0f, 0x00, 0x00, 0x00}, 1},
+ {{0x1b, 0x07, 0x14, 0x00, 0x00, 0x00}, 1},
+ {{0x1b, 0x08, 0x0f, 0x00, 0x00, 0x00}, 1},
+ {{0x1b, 0x09, 0x10, 0x00, 0x00, 0x00}, 1},
+ {{0x1b, 0x0e, 0x00, 0x00, 0x00, 0x00}, 1},
+ {{0x1b, 0x0f, 0x00, 0x00, 0x00, 0x00}, 1},
+ {{0x1b, 0x12, 0x07, 0x00, 0x00, 0x00}, 1},
+ {{0x1b, 0x10, 0x1f, 0x00, 0x00, 0x00}, 1},
+ {{0x1b, 0x11, 0x01, 0x00, 0x00, 0x00}, 1},
+ {{0x13, 0x25, 0x01, 0x16, 0x00, 0x00}, 1}, /* width/8 */
+ {{0x13, 0x26, 0x01, 0x12, 0x00, 0x00}, 1}, /* height/8 */
+ /* {{0x13, 0x27, 0x01, 0x68, 0x00, 0x00}, 4}, subsample?
+ * {{0x13, 0x28, 0x01, 0x1e, 0x00, 0x00}, 4}, does nothing
+ * {{0x13, 0x27, 0x01, 0x20, 0x00, 0x00}, 4}, */
+ /* {{0x13, 0x29, 0x01, 0x22, 0x00, 0x00}, 4},
+ * causes subsampling
+ * but not a change in the resolution setting! */
+ {{0x13, 0x2c, 0x01, 0x02, 0x00, 0x00}, 4},
+ {{0x13, 0x2d, 0x01, 0x01, 0x00, 0x00}, 4},
+ {{0x13, 0x2e, 0x01, 0x08, 0x00, 0x00}, 4},
+ {{0x13, 0x2f, 0x01, 0x06, 0x00, 0x00}, 4},
+ {{0x13, 0x28, 0x01, 0x00, 0x00, 0x00}, 4},
+ {{0x1b, 0x04, 0x6d, 0x00, 0x00, 0x00}, 1},
+ {{0x1b, 0x05, 0x03, 0x00, 0x00, 0x00}, 1},
+ {{0x20, 0x36, 0x06, 0x00, 0x00, 0x00}, 1},
+ {{0x1b, 0x0e, 0x01, 0x00, 0x00, 0x00}, 1},
+ {{0x12, 0x27, 0x01, 0x00, 0x00, 0x00}, 4},
+ {{0x1b, 0x0f, 0x00, 0x00, 0x00, 0x00}, 1},
+ {{0x20, 0x36, 0x05, 0x00, 0x00, 0x00}, 1},
+ {{0x1b, 0x10, 0x0f, 0x00, 0x00, 0x00}, 1},
+ {{0x1b, 0x02, 0x06, 0x00, 0x00, 0x00}, 1},
+ {{0x1b, 0x11, 0x01, 0x00, 0x00, 0x00}, 1},
+ {{0x20, 0x34, 0xa1, 0x00, 0x00, 0x00}, 1},/* use compression */
+ /* Camera should start to capture now. */
+ };
+
+ return run_start_commands(gspca_dev, cif_start_commands,
+ ARRAY_SIZE(cif_start_commands));
+}
+
+static int start_ms350_cam(struct gspca_dev *gspca_dev)
+{
+ struct init_command ms350_start_commands[] = {
+ {{0x0c, 0x01, 0x00, 0x00, 0x00, 0x00}, 4},
+ {{0x16, 0x01, 0x00, 0x00, 0x00, 0x00}, 4},
+ {{0x13, 0x20, 0x01, 0x00, 0x00, 0x00}, 4},
+ {{0x13, 0x21, 0x01, 0x00, 0x00, 0x00}, 4},
+ {{0x13, 0x22, 0x01, 0x04, 0x00, 0x00}, 4},
+ {{0x13, 0x23, 0x01, 0x03, 0x00, 0x00}, 4},
+ {{0x13, 0x24, 0x01, 0x00, 0x00, 0x00}, 4},
+ {{0x13, 0x25, 0x01, 0x16, 0x00, 0x00}, 4},
+ {{0x13, 0x26, 0x01, 0x12, 0x00, 0x00}, 4},
+ {{0x13, 0x27, 0x01, 0x28, 0x00, 0x00}, 4},
+ {{0x13, 0x28, 0x01, 0x09, 0x00, 0x00}, 4},
+ {{0x13, 0x29, 0x01, 0x00, 0x00, 0x00}, 4},
+ {{0x13, 0x2a, 0x01, 0x00, 0x00, 0x00}, 4},
+ {{0x13, 0x2b, 0x01, 0x00, 0x00, 0x00}, 4},
+ {{0x13, 0x2c, 0x01, 0x02, 0x00, 0x00}, 4},
+ {{0x13, 0x2d, 0x01, 0x03, 0x00, 0x00}, 4},
+ {{0x13, 0x2e, 0x01, 0x0f, 0x00, 0x00}, 4},
+ {{0x13, 0x2f, 0x01, 0x0c, 0x00, 0x00}, 4},
+ {{0x12, 0x34, 0x01, 0x00, 0x00, 0x00}, 4},
+ {{0x13, 0x34, 0x01, 0xa1, 0x00, 0x00}, 4},
+ {{0x13, 0x35, 0x01, 0x00, 0x00, 0x00}, 4},
+ {{0x11, 0x00, 0x01, 0x00, 0x00, 0x00}, 4},
+ {{0x11, 0x01, 0x70, 0x00, 0x00, 0x00}, 4},
+ {{0x11, 0x02, 0x05, 0x00, 0x00, 0x00}, 4},
+ {{0x11, 0x03, 0x5d, 0x00, 0x00, 0x00}, 4},
+ {{0x11, 0x04, 0x07, 0x00, 0x00, 0x00}, 4},
+ {{0x11, 0x05, 0x25, 0x00, 0x00, 0x00}, 4},
+ {{0x11, 0x06, 0x00, 0x00, 0x00, 0x00}, 4},
+ {{0x11, 0x07, 0x09, 0x00, 0x00, 0x00}, 4},
+ {{0x11, 0x08, 0x01, 0x00, 0x00, 0x00}, 4},
+ {{0x11, 0x09, 0x00, 0x00, 0x00, 0x00}, 4},
+ {{0x11, 0x0a, 0x00, 0x00, 0x00, 0x00}, 4},
+ {{0x11, 0x0b, 0x01, 0x00, 0x00, 0x00}, 4},
+ {{0x11, 0x0c, 0x00, 0x00, 0x00, 0x00}, 4},
+ {{0x11, 0x0d, 0x0c, 0x00, 0x00, 0x00}, 4},
+ {{0x11, 0x0e, 0x01, 0x00, 0x00, 0x00}, 4},
+ {{0x11, 0x0f, 0x00, 0x00, 0x00, 0x00}, 4},
+ {{0x11, 0x10, 0x00, 0x00, 0x00, 0x00}, 4},
+ {{0x11, 0x11, 0x00, 0x00, 0x00, 0x00}, 4},
+ {{0x11, 0x12, 0x00, 0x00, 0x00, 0x00}, 4},
+ {{0x11, 0x13, 0x63, 0x00, 0x00, 0x00}, 4},
+ {{0x11, 0x15, 0x70, 0x00, 0x00, 0x00}, 4},
+ {{0x11, 0x18, 0x00, 0x00, 0x00, 0x00}, 4},
+ {{0x11, 0x11, 0x01, 0x00, 0x00, 0x00}, 4},
+ {{0x13, 0x25, 0x01, 0x28, 0x00, 0x00}, 4}, /* width */
+ {{0x13, 0x26, 0x01, 0x1e, 0x00, 0x00}, 4}, /* height */
+ {{0x13, 0x28, 0x01, 0x09, 0x00, 0x00}, 4}, /* vstart? */
+ {{0x13, 0x27, 0x01, 0x28, 0x00, 0x00}, 4},
+ {{0x13, 0x29, 0x01, 0x40, 0x00, 0x00}, 4}, /* hstart? */
+ {{0x13, 0x2c, 0x01, 0x02, 0x00, 0x00}, 4},
+ {{0x13, 0x2d, 0x01, 0x03, 0x00, 0x00}, 4},
+ {{0x13, 0x2e, 0x01, 0x0f, 0x00, 0x00}, 4},
+ {{0x13, 0x2f, 0x01, 0x0c, 0x00, 0x00}, 4},
+ {{0x1b, 0x02, 0x05, 0x00, 0x00, 0x00}, 1},
+ {{0x1b, 0x11, 0x01, 0x00, 0x00, 0x00}, 1},
+ {{0x20, 0x18, 0x00, 0x00, 0x00, 0x00}, 1},
+ {{0x1b, 0x02, 0x0a, 0x00, 0x00, 0x00}, 1},
+ {{0x1b, 0x11, 0x01, 0x00, 0x00, 0x00}, 0},
+ /* Camera should start to capture now. */
+ };
+
+ return run_start_commands(gspca_dev, ms350_start_commands,
+ ARRAY_SIZE(ms350_start_commands));
+}
+
+static int start_genius_cam(struct gspca_dev *gspca_dev)
+{
+ struct init_command genius_start_commands[] = {
+ {{0x0c, 0x01, 0x00, 0x00, 0x00, 0x00}, 4},
+ {{0x16, 0x01, 0x00, 0x00, 0x00, 0x00}, 4},
+ {{0x10, 0x00, 0x00, 0x00, 0x00, 0x00}, 4},
+ {{0x13, 0x25, 0x01, 0x16, 0x00, 0x00}, 4},
+ {{0x13, 0x26, 0x01, 0x12, 0x00, 0x00}, 4},
+ /* "preliminary" width and height settings */
+ {{0x13, 0x28, 0x01, 0x0e, 0x00, 0x00}, 4},
+ {{0x13, 0x27, 0x01, 0x20, 0x00, 0x00}, 4},
+ {{0x13, 0x29, 0x01, 0x22, 0x00, 0x00}, 4},
+ {{0x13, 0x2c, 0x01, 0x02, 0x00, 0x00}, 4},
+ {{0x13, 0x2d, 0x01, 0x02, 0x00, 0x00}, 4},
+ {{0x13, 0x2e, 0x01, 0x09, 0x00, 0x00}, 4},
+ {{0x13, 0x2f, 0x01, 0x07, 0x00, 0x00}, 4},
+ {{0x11, 0x20, 0x00, 0x00, 0x00, 0x00}, 4},
+ {{0x11, 0x21, 0x2d, 0x00, 0x00, 0x00}, 4},
+ {{0x11, 0x22, 0x00, 0x00, 0x00, 0x00}, 4},
+ {{0x11, 0x23, 0x03, 0x00, 0x00, 0x00}, 4},
+ {{0x11, 0x10, 0x00, 0x00, 0x00, 0x00}, 4},
+ {{0x11, 0x11, 0x64, 0x00, 0x00, 0x00}, 4},
+ {{0x11, 0x12, 0x00, 0x00, 0x00, 0x00}, 4},
+ {{0x11, 0x13, 0x91, 0x00, 0x00, 0x00}, 4},
+ {{0x11, 0x14, 0x01, 0x00, 0x00, 0x00}, 4},
+ {{0x11, 0x15, 0x20, 0x00, 0x00, 0x00}, 4},
+ {{0x11, 0x16, 0x01, 0x00, 0x00, 0x00}, 4},
+ {{0x11, 0x17, 0x60, 0x00, 0x00, 0x00}, 4},
+ {{0x11, 0x20, 0x00, 0x00, 0x00, 0x00}, 4},
+ {{0x11, 0x21, 0x2d, 0x00, 0x00, 0x00}, 4},
+ {{0x11, 0x22, 0x00, 0x00, 0x00, 0x00}, 4},
+ {{0x11, 0x23, 0x03, 0x00, 0x00, 0x00}, 4},
+ {{0x11, 0x25, 0x00, 0x00, 0x00, 0x00}, 4},
+ {{0x11, 0x26, 0x02, 0x00, 0x00, 0x00}, 4},
+ {{0x11, 0x27, 0x88, 0x00, 0x00, 0x00}, 4},
+ {{0x11, 0x30, 0x38, 0x00, 0x00, 0x00}, 4},
+ {{0x11, 0x31, 0x2a, 0x00, 0x00, 0x00}, 4},
+ {{0x11, 0x32, 0x2a, 0x00, 0x00, 0x00}, 4},
+ {{0x11, 0x33, 0x2a, 0x00, 0x00, 0x00}, 4},
+ {{0x11, 0x34, 0x02, 0x00, 0x00, 0x00}, 4},
+ {{0x11, 0x5b, 0x0a, 0x00, 0x00, 0x00}, 4},
+ {{0x13, 0x25, 0x01, 0x28, 0x00, 0x00}, 4}, /* real width */
+ {{0x13, 0x26, 0x01, 0x1e, 0x00, 0x00}, 4}, /* real height */
+ {{0x13, 0x28, 0x01, 0x0e, 0x00, 0x00}, 4},
+ {{0x13, 0x27, 0x01, 0x20, 0x00, 0x00}, 4},
+ {{0x13, 0x29, 0x01, 0x62, 0x00, 0x00}, 4},
+ {{0x13, 0x2c, 0x01, 0x02, 0x00, 0x00}, 4},
+ {{0x13, 0x2d, 0x01, 0x03, 0x00, 0x00}, 4},
+ {{0x13, 0x2e, 0x01, 0x0f, 0x00, 0x00}, 4},
+ {{0x13, 0x2f, 0x01, 0x0c, 0x00, 0x00}, 4},
+ {{0x11, 0x20, 0x00, 0x00, 0x00, 0x00}, 4},
+ {{0x11, 0x21, 0x2a, 0x00, 0x00, 0x00}, 4},
+ {{0x11, 0x22, 0x00, 0x00, 0x00, 0x00}, 4},
+ {{0x11, 0x23, 0x28, 0x00, 0x00, 0x00}, 4},
+ {{0x11, 0x10, 0x00, 0x00, 0x00, 0x00}, 4},
+ {{0x11, 0x11, 0x04, 0x00, 0x00, 0x00}, 4},
+ {{0x11, 0x12, 0x00, 0x00, 0x00, 0x00}, 4},
+ {{0x11, 0x13, 0x03, 0x00, 0x00, 0x00}, 4},
+ {{0x11, 0x14, 0x01, 0x00, 0x00, 0x00}, 4},
+ {{0x11, 0x15, 0xe0, 0x00, 0x00, 0x00}, 4},
+ {{0x11, 0x16, 0x02, 0x00, 0x00, 0x00}, 4},
+ {{0x11, 0x17, 0x80, 0x00, 0x00, 0x00}, 4},
+ {{0x1c, 0x20, 0x00, 0x2a, 0x00, 0x00}, 1},
+ {{0x1c, 0x20, 0x00, 0x2a, 0x00, 0x00}, 1},
+ {{0x20, 0x34, 0xa1, 0x00, 0x00, 0x00}, 0}
+ /* Camera should start to capture now. */
+ };
+
+ return run_start_commands(gspca_dev, genius_start_commands,
+ ARRAY_SIZE(genius_start_commands));
+}
+
+static int start_vivitar_cam(struct gspca_dev *gspca_dev)
+{
+ struct init_command vivitar_start_commands[] = {
+ {{0x0c, 0x01, 0x00, 0x00, 0x00, 0x00}, 4},
+ {{0x13, 0x20, 0x01, 0x00, 0x00, 0x00}, 4},
+ {{0x13, 0x21, 0x01, 0x00, 0x00, 0x00}, 4},
+ {{0x13, 0x22, 0x01, 0x01, 0x00, 0x00}, 4},
+ {{0x13, 0x23, 0x01, 0x01, 0x00, 0x00}, 4},
+ {{0x13, 0x24, 0x01, 0x00, 0x00, 0x00}, 4},
+ {{0x13, 0x25, 0x01, 0x28, 0x00, 0x00}, 4},
+ {{0x13, 0x26, 0x01, 0x1e, 0x00, 0x00}, 4},
+ {{0x13, 0x27, 0x01, 0x20, 0x00, 0x00}, 4},
+ {{0x13, 0x28, 0x01, 0x0a, 0x00, 0x00}, 4},
+ /*
+ * Above is changed from OEM 0x0b. Fixes Bayer tiling.
+ * Presumably gives a vertical shift of one row.
+ */
+ {{0x13, 0x29, 0x01, 0x20, 0x00, 0x00}, 4},
+ /* Above seems to do horizontal shift. */
+ {{0x13, 0x2a, 0x01, 0x00, 0x00, 0x00}, 4},
+ {{0x13, 0x2b, 0x01, 0x00, 0x00, 0x00}, 4},
+ {{0x13, 0x2c, 0x01, 0x02, 0x00, 0x00}, 4},
+ {{0x13, 0x2d, 0x01, 0x03, 0x00, 0x00}, 4},
+ {{0x13, 0x2e, 0x01, 0x0f, 0x00, 0x00}, 4},
+ {{0x13, 0x2f, 0x01, 0x0c, 0x00, 0x00}, 4},
+ /* Above three commands seem to relate to brightness. */
+ {{0x12, 0x34, 0x01, 0x00, 0x00, 0x00}, 4},
+ {{0x13, 0x34, 0x01, 0xa1, 0x00, 0x00}, 4},
+ {{0x13, 0x35, 0x01, 0x00, 0x00, 0x00}, 4},
+ {{0x1b, 0x12, 0x80, 0x00, 0x00, 0x00}, 1},
+ {{0x1b, 0x01, 0x77, 0x00, 0x00, 0x00}, 1},
+ {{0x1b, 0x02, 0x3a, 0x00, 0x00, 0x00}, 1},
+ {{0x1b, 0x12, 0x78, 0x00, 0x00, 0x00}, 1},
+ {{0x1b, 0x13, 0x00, 0x00, 0x00, 0x00}, 1},
+ {{0x1b, 0x14, 0x80, 0x00, 0x00, 0x00}, 1},
+ {{0x1b, 0x15, 0x34, 0x00, 0x00, 0x00}, 1},
+ {{0x1b, 0x1b, 0x04, 0x00, 0x00, 0x00}, 1},
+ {{0x1b, 0x20, 0x44, 0x00, 0x00, 0x00}, 1},
+ {{0x1b, 0x23, 0xee, 0x00, 0x00, 0x00}, 1},
+ {{0x1b, 0x26, 0xa0, 0x00, 0x00, 0x00}, 1},
+ {{0x1b, 0x27, 0x9a, 0x00, 0x00, 0x00}, 1},
+ {{0x1b, 0x28, 0xa0, 0x00, 0x00, 0x00}, 1},
+ {{0x1b, 0x29, 0x30, 0x00, 0x00, 0x00}, 1},
+ {{0x1b, 0x2a, 0x80, 0x00, 0x00, 0x00}, 1},
+ {{0x1b, 0x2b, 0x00, 0x00, 0x00, 0x00}, 1},
+ {{0x1b, 0x2f, 0x3d, 0x00, 0x00, 0x00}, 1},
+ {{0x1b, 0x30, 0x24, 0x00, 0x00, 0x00}, 1},
+ {{0x1b, 0x32, 0x86, 0x00, 0x00, 0x00}, 1},
+ {{0x1b, 0x60, 0xa9, 0x00, 0x00, 0x00}, 1},
+ {{0x1b, 0x61, 0x42, 0x00, 0x00, 0x00}, 1},
+ {{0x1b, 0x65, 0x00, 0x00, 0x00, 0x00}, 1},
+ {{0x1b, 0x69, 0x38, 0x00, 0x00, 0x00}, 1},
+ {{0x1b, 0x6f, 0x88, 0x00, 0x00, 0x00}, 1},
+ {{0x1b, 0x70, 0x0b, 0x00, 0x00, 0x00}, 1},
+ {{0x1b, 0x71, 0x00, 0x00, 0x00, 0x00}, 1},
+ {{0x1b, 0x74, 0x21, 0x00, 0x00, 0x00}, 1},
+ {{0x1b, 0x75, 0x86, 0x00, 0x00, 0x00}, 1},
+ {{0x1b, 0x76, 0x00, 0x00, 0x00, 0x00}, 1},
+ {{0x1b, 0x7d, 0xf3, 0x00, 0x00, 0x00}, 1},
+ {{0x1b, 0x17, 0x1c, 0x00, 0x00, 0x00}, 1},
+ {{0x1b, 0x18, 0xc0, 0x00, 0x00, 0x00}, 1},
+ {{0x1b, 0x19, 0x05, 0x00, 0x00, 0x00}, 1},
+ {{0x1b, 0x1a, 0xf6, 0x00, 0x00, 0x00}, 1},
+ /* {{0x13, 0x25, 0x01, 0x28, 0x00, 0x00}, 4},
+ {{0x13, 0x26, 0x01, 0x1e, 0x00, 0x00}, 4},
+ {{0x13, 0x28, 0x01, 0x0b, 0x00, 0x00}, 4}, */
+ {{0x20, 0x36, 0x06, 0x00, 0x00, 0x00}, 1},
+ {{0x1b, 0x10, 0x26, 0x00, 0x00, 0x00}, 1},
+ {{0x12, 0x27, 0x01, 0x00, 0x00, 0x00}, 4},
+ {{0x1b, 0x76, 0x03, 0x00, 0x00, 0x00}, 1},
+ {{0x20, 0x36, 0x05, 0x00, 0x00, 0x00}, 1},
+ {{0x1b, 0x00, 0x3f, 0x00, 0x00, 0x00}, 1},
+ /* Above is brightness; OEM driver setting is 0x10 */
+ {{0x12, 0x27, 0x01, 0x00, 0x00, 0x00}, 4},
+ {{0x20, 0x29, 0x30, 0x00, 0x00, 0x00}, 1},
+ {{0x20, 0x34, 0xa1, 0x00, 0x00, 0x00}, 1}
+ };
+
+ return run_start_commands(gspca_dev, vivitar_start_commands,
+ ARRAY_SIZE(vivitar_start_commands));
+}
+
+static int sd_start(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ int err_code;
+
+ sd->sof_read = 0;
+
+ switch (sd->model) {
+ case 0x7005:
+ err_code = start_genius_cam(gspca_dev);
+ break;
+ case 0x8001:
+ err_code = start_spy_cam(gspca_dev);
+ break;
+ case 0x8003:
+ err_code = start_cif_cam(gspca_dev);
+ break;
+ case 0x8008:
+ err_code = start_ms350_cam(gspca_dev);
+ break;
+ case 0x800a:
+ err_code = start_vivitar_cam(gspca_dev);
+ break;
+ default:
+ PDEBUG(D_ERR, "Starting unknown camera, please report this");
+ return -ENXIO;
+ }
+
+ return err_code;
+}
+
+static void sd_stopN(struct gspca_dev *gspca_dev)
+{
+ int result;
+ __u8 data[6];
+
+ result = sn9c2028_read1(gspca_dev);
+ if (result < 0)
+ PDEBUG(D_ERR, "Camera Stop read failed");
+
+ memset(data, 0, 6);
+ data[0] = 0x14;
+ result = sn9c2028_command(gspca_dev, data);
+ if (result < 0)
+ PDEBUG(D_ERR, "Camera Stop command failed");
+}
+
+/* Include sn9c2028 sof detection functions */
+#include "sn9c2028.h"
+
+static void sd_pkt_scan(struct gspca_dev *gspca_dev,
+ __u8 *data, /* isoc packet */
+ int len) /* iso packet length */
+{
+ unsigned char *sof;
+
+ sof = sn9c2028_find_sof(gspca_dev, data, len);
+ if (sof) {
+ int n;
+
+ /* finish decoding current frame */
+ n = sof - data;
+ if (n > sizeof sn9c2028_sof_marker)
+ n -= sizeof sn9c2028_sof_marker;
+ else
+ n = 0;
+ gspca_frame_add(gspca_dev, LAST_PACKET, data, n);
+ /* Start next frame. */
+ gspca_frame_add(gspca_dev, FIRST_PACKET,
+ sn9c2028_sof_marker, sizeof sn9c2028_sof_marker);
+ len -= sof - data;
+ data = sof;
+ }
+ gspca_frame_add(gspca_dev, INTER_PACKET, data, len);
+}
+
+/* sub-driver description */
+static const struct sd_desc sd_desc = {
+ .name = MODULE_NAME,
+ .ctrls = sd_ctrls,
+ .nctrls = ARRAY_SIZE(sd_ctrls),
+ .config = sd_config,
+ .init = sd_init,
+ .start = sd_start,
+ .stopN = sd_stopN,
+ .pkt_scan = sd_pkt_scan,
+};
+
+/* -- module initialisation -- */
+static const __devinitdata struct usb_device_id device_table[] = {
+ {USB_DEVICE(0x0458, 0x7005)}, /* Genius Smart 300, version 2 */
+ /* The Genius Smart is untested. I can't find an owner ! */
+ /* {USB_DEVICE(0x0c45, 0x8000)}, DC31VC, Don't know this camera */
+ {USB_DEVICE(0x0c45, 0x8001)}, /* Wild Planet digital spy cam */
+ {USB_DEVICE(0x0c45, 0x8003)}, /* Several small CIF cameras */
+ /* {USB_DEVICE(0x0c45, 0x8006)}, Unknown VGA camera */
+ {USB_DEVICE(0x0c45, 0x8008)}, /* Mini-Shotz ms-350 */
+ {USB_DEVICE(0x0c45, 0x800a)}, /* Vivicam 3350B */
+ {}
+};
+MODULE_DEVICE_TABLE(usb, device_table);
+
+/* -- device connect -- */
+static int sd_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ return gspca_dev_probe(intf, id, &sd_desc, sizeof(struct sd),
+ THIS_MODULE);
+}
+
+static struct usb_driver sd_driver = {
+ .name = MODULE_NAME,
+ .id_table = device_table,
+ .probe = sd_probe,
+ .disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+ .suspend = gspca_suspend,
+ .resume = gspca_resume,
+#endif
+};
+
+/* -- module insert / remove -- */
+static int __init sd_mod_init(void)
+{
+ int ret;
+
+ ret = usb_register(&sd_driver);
+ if (ret < 0)
+ return ret;
+ PDEBUG(D_PROBE, "registered");
+ return 0;
+}
+
+static void __exit sd_mod_exit(void)
+{
+ usb_deregister(&sd_driver);
+ PDEBUG(D_PROBE, "deregistered");
+}
+
+module_init(sd_mod_init);
+module_exit(sd_mod_exit);
diff --git a/drivers/media/video/gspca/sn9c2028.h b/drivers/media/video/gspca/sn9c2028.h
new file mode 100644
index 0000000..8fd1d3e
--- /dev/null
+++ b/drivers/media/video/gspca/sn9c2028.h
@@ -0,0 +1,51 @@
+/*
+ * SN9C2028 common functions
+ *
+ * Copyright (C) 2009 Theodore Kilgore <kilgota@auburn,edu>
+ *
+ * Based closely upon the file gspca/pac_common.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+static const unsigned char sn9c2028_sof_marker[5] =
+ { 0xff, 0xff, 0x00, 0xc4, 0xc4 };
+
+static unsigned char *sn9c2028_find_sof(struct gspca_dev *gspca_dev,
+ unsigned char *m, int len)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ int i;
+
+ /* Search for the SOF marker (fixed part) in the header */
+ for (i = 0; i < len; i++) {
+ if (m[i] == sn9c2028_sof_marker[sd->sof_read]) {
+ sd->sof_read++;
+ if (sd->sof_read == sizeof(sn9c2028_sof_marker)) {
+ PDEBUG(D_FRAM,
+ "SOF found, bytes to analyze: %u."
+ " Frame starts at byte #%u",
+ len, i + 1);
+ sd->sof_read = 0;
+ return m + i + 1;
+ }
+ } else {
+ sd->sof_read = 0;
+ }
+ }
+
+ return NULL;
+}
diff --git a/drivers/media/video/gspca/sn9c20x.c b/drivers/media/video/gspca/sn9c20x.c
index 0ca1c06..4a1bc08 100644
--- a/drivers/media/video/gspca/sn9c20x.c
+++ b/drivers/media/video/gspca/sn9c20x.c
@@ -129,7 +129,7 @@
static int sd_setautoexposure(struct gspca_dev *gspca_dev, s32 val);
static int sd_getautoexposure(struct gspca_dev *gspca_dev, s32 *val);
-static struct ctrl sd_ctrls[] = {
+static const struct ctrl sd_ctrls[] = {
{
#define BRIGHTNESS_IDX 0
{
@@ -1506,36 +1506,36 @@
struct sd *sd = (struct sd *) gspca_dev;
s32 hue_coord, hue_index = 180 + sd->hue;
u8 cmatrix[21];
- memset(cmatrix, 0, 21);
+ memset(cmatrix, 0, sizeof cmatrix);
cmatrix[2] = (sd->contrast * 0x25 / 0x100) + 0x26;
cmatrix[0] = 0x13 + (cmatrix[2] - 0x26) * 0x13 / 0x25;
cmatrix[4] = 0x07 + (cmatrix[2] - 0x26) * 0x07 / 0x25;
cmatrix[18] = sd->brightness - 0x80;
hue_coord = (hsv_red_x[hue_index] * sd->saturation) >> 8;
- cmatrix[6] = (unsigned char)(hue_coord & 0xff);
- cmatrix[7] = (unsigned char)((hue_coord >> 8) & 0x0f);
+ cmatrix[6] = hue_coord;
+ cmatrix[7] = (hue_coord >> 8) & 0x0f;
hue_coord = (hsv_red_y[hue_index] * sd->saturation) >> 8;
- cmatrix[8] = (unsigned char)(hue_coord & 0xff);
- cmatrix[9] = (unsigned char)((hue_coord >> 8) & 0x0f);
+ cmatrix[8] = hue_coord;
+ cmatrix[9] = (hue_coord >> 8) & 0x0f;
hue_coord = (hsv_green_x[hue_index] * sd->saturation) >> 8;
- cmatrix[10] = (unsigned char)(hue_coord & 0xff);
- cmatrix[11] = (unsigned char)((hue_coord >> 8) & 0x0f);
+ cmatrix[10] = hue_coord;
+ cmatrix[11] = (hue_coord >> 8) & 0x0f;
hue_coord = (hsv_green_y[hue_index] * sd->saturation) >> 8;
- cmatrix[12] = (unsigned char)(hue_coord & 0xff);
- cmatrix[13] = (unsigned char)((hue_coord >> 8) & 0x0f);
+ cmatrix[12] = hue_coord;
+ cmatrix[13] = (hue_coord >> 8) & 0x0f;
hue_coord = (hsv_blue_x[hue_index] * sd->saturation) >> 8;
- cmatrix[14] = (unsigned char)(hue_coord & 0xff);
- cmatrix[15] = (unsigned char)((hue_coord >> 8) & 0x0f);
+ cmatrix[14] = hue_coord;
+ cmatrix[15] = (hue_coord >> 8) & 0x0f;
hue_coord = (hsv_blue_y[hue_index] * sd->saturation) >> 8;
- cmatrix[16] = (unsigned char)(hue_coord & 0xff);
- cmatrix[17] = (unsigned char)((hue_coord >> 8) & 0x0f);
+ cmatrix[16] = hue_coord;
+ cmatrix[17] = (hue_coord >> 8) & 0x0f;
return reg_w(gspca_dev, 0x10e1, cmatrix, 21);
}
@@ -2015,6 +2015,7 @@
default:
cam->cam_mode = vga_mode;
cam->nmodes = ARRAY_SIZE(vga_mode);
+ break;
}
sd->old_step = 0;
@@ -2319,7 +2320,7 @@
}
}
if (avg_lum > MAX_AVG_LUM) {
- if (sd->gain >= 1) {
+ if (sd->gain > 0) {
sd->gain--;
set_gain(gspca_dev);
}
@@ -2347,7 +2348,7 @@
{
struct sd *sd = (struct sd *) gspca_dev;
int avg_lum;
- static unsigned char frame_header[] =
+ static u8 frame_header[] =
{0xff, 0xff, 0x00, 0xc4, 0xc4, 0x96};
if (len == 64 && memcmp(data, frame_header, 6) == 0) {
avg_lum = ((data[35] >> 2) & 3) |
diff --git a/drivers/media/video/gspca/sonixb.c b/drivers/media/video/gspca/sonixb.c
index ddff2b5..785eeb4 100644
--- a/drivers/media/video/gspca/sonixb.c
+++ b/drivers/media/video/gspca/sonixb.c
@@ -42,6 +42,7 @@
#define MODULE_NAME "sonixb"
+#include <linux/input.h>
#include "gspca.h"
MODULE_AUTHOR("Michel Xhaard <mxhaard@users.sourceforge.net>");
@@ -53,9 +54,11 @@
struct gspca_dev gspca_dev; /* !! must be the first item */
atomic_t avg_lum;
int prev_avg_lum;
+ int exp_too_low_cnt;
+ int exp_too_high_cnt;
+ unsigned short exposure;
unsigned char gain;
- unsigned char exposure;
unsigned char brightness;
unsigned char autogain;
unsigned char autogain_ignore_frames;
@@ -73,8 +76,9 @@
#define SENSOR_OV7630 2
#define SENSOR_PAS106 3
#define SENSOR_PAS202 4
-#define SENSOR_TAS5110 5
-#define SENSOR_TAS5130CXX 6
+#define SENSOR_TAS5110C 5
+#define SENSOR_TAS5110D 6
+#define SENSOR_TAS5130CXX 7
__u8 reg11;
};
@@ -95,13 +99,15 @@
/* sensor_data flags */
#define F_GAIN 0x01 /* has gain */
#define F_SIF 0x02 /* sif or vga */
+#define F_COARSE_EXPO 0x04 /* exposure control is coarse */
/* priv field of struct v4l2_pix_format flags (do not use low nibble!) */
#define MODE_RAW 0x10 /* raw bayer mode */
#define MODE_REDUCED_SIF 0x20 /* vga mode (320x240 / 160x120) on sif cam */
/* ctrl_dis helper macros */
-#define NO_EXPO ((1 << EXPOSURE_IDX) | (1 << AUTOGAIN_IDX))
+#define NO_EXPO ((1 << EXPOSURE_IDX) | (1 << COARSE_EXPOSURE_IDX) | \
+ (1 << AUTOGAIN_IDX))
#define NO_FREQ (1 << FREQ_IDX)
#define NO_BRIGHTNESS (1 << BRIGHTNESS_IDX)
@@ -127,11 +133,10 @@
}
/* We calculate the autogain at the end of the transfer of a frame, at this
- moment a frame with the old settings is being transmitted, and a frame is
- being captured with the old settings. So if we adjust the autogain we must
- ignore atleast the 2 next frames for the new settings to come into effect
- before doing any other adjustments */
-#define AUTOGAIN_IGNORE_FRAMES 3
+ moment a frame with the old settings is being captured and transmitted. So
+ if we adjust the gain or exposure we must ignore atleast the next frame for
+ the new settings to come into effect before doing any other adjustments. */
+#define AUTOGAIN_IGNORE_FRAMES 1
/* V4L2 controls supported by the driver */
static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val);
@@ -145,7 +150,7 @@
static int sd_setfreq(struct gspca_dev *gspca_dev, __s32 val);
static int sd_getfreq(struct gspca_dev *gspca_dev, __s32 *val);
-static struct ctrl sd_ctrls[] = {
+static const struct ctrl sd_ctrls[] = {
#define BRIGHTNESS_IDX 0
{
{
@@ -171,7 +176,7 @@
.maximum = 255,
.step = 1,
#define GAIN_DEF 127
-#define GAIN_KNEE 200
+#define GAIN_KNEE 230
.default_value = GAIN_DEF,
},
.set = sd_setgain,
@@ -183,10 +188,10 @@
.id = V4L2_CID_EXPOSURE,
.type = V4L2_CTRL_TYPE_INTEGER,
.name = "Exposure",
-#define EXPOSURE_DEF 16 /* 32 ms / 30 fps */
-#define EXPOSURE_KNEE 50 /* 100 ms / 10 fps */
+#define EXPOSURE_DEF 66 /* 33 ms / 30 fps (except on PASXXX) */
+#define EXPOSURE_KNEE 200 /* 100 ms / 10 fps (except on PASXXX) */
.minimum = 0,
- .maximum = 255,
+ .maximum = 1023,
.step = 1,
.default_value = EXPOSURE_DEF,
.flags = 0,
@@ -194,7 +199,23 @@
.set = sd_setexposure,
.get = sd_getexposure,
},
-#define AUTOGAIN_IDX 3
+#define COARSE_EXPOSURE_IDX 3
+ {
+ {
+ .id = V4L2_CID_EXPOSURE,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Exposure",
+#define COARSE_EXPOSURE_DEF 2 /* 30 fps */
+ .minimum = 2,
+ .maximum = 15,
+ .step = 1,
+ .default_value = COARSE_EXPOSURE_DEF,
+ .flags = 0,
+ },
+ .set = sd_setexposure,
+ .get = sd_getexposure,
+ },
+#define AUTOGAIN_IDX 4
{
{
.id = V4L2_CID_AUTOGAIN,
@@ -210,7 +231,7 @@
.set = sd_setautogain,
.get = sd_getautogain,
},
-#define FREQ_IDX 4
+#define FREQ_IDX 5
{
{
.id = V4L2_CID_POWER_LINE_FREQUENCY,
@@ -219,7 +240,7 @@
.minimum = 0,
.maximum = 2, /* 0: 0, 1: 50Hz, 2:60Hz */
.step = 1,
-#define FREQ_DEF 1
+#define FREQ_DEF 0
.default_value = FREQ_DEF,
},
.set = sd_setfreq,
@@ -345,7 +366,7 @@
};
static const __u8 initOv7630_3[] = {
0x44, 0x44, 0x00, 0x1a, 0x20, 0x20, 0x20, 0x80, /* r01 .. r08 */
- 0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x04, /* r09 .. r10 */
+ 0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* r09 .. r10 */
0x00, 0x02, 0x01, 0x0a, /* r11 .. r14 */
0x28, 0x1e, /* H & V sizes r15 .. r16 */
0x68, 0x8f, MCK_INIT1, /* r17 .. r19 */
@@ -387,6 +408,30 @@
0x18, 0x10, 0x02, 0x02, 0x09, 0x07
};
/* compression 0x86 mckinit1 0x2b */
+
+/* "Known" PAS106B registers:
+ 0x02 clock divider
+ 0x03 Variable framerate bits 4-11
+ 0x04 Var framerate bits 0-3, one must leave the 4 msb's at 0 !!
+ The variable framerate control must never be set lower then 300,
+ which sets the framerate at 90 / reg02, otherwise vsync is lost.
+ 0x05 Shutter Time Line Offset, this can be used as an exposure control:
+ 0 = use full frame time, 255 = no exposure at all
+ Note this may never be larger then "var-framerate control" / 2 - 2.
+ When var-framerate control is < 514, no exposure is reached at the max
+ allowed value for the framerate control value, rather then at 255.
+ 0x06 Shutter Time Pixel Offset, like reg05 this influences exposure, but
+ only a very little bit, leave at 0xcd
+ 0x07 offset sign bit (bit0 1 > negative offset)
+ 0x08 offset
+ 0x09 Blue Gain
+ 0x0a Green1 Gain
+ 0x0b Green2 Gain
+ 0x0c Red Gain
+ 0x0e Global gain
+ 0x13 Write 1 to commit settings to sensor
+*/
+
static const __u8 pas106_sensor_init[][8] = {
/* Pixel Clock Divider 6 */
{ 0xa1, 0x40, 0x02, 0x04, 0x00, 0x00, 0x00, 0x14 },
@@ -433,37 +478,55 @@
0x44, 0x44, 0x21, 0x30, 0x00, 0x00, 0x00, 0x80, 0x40, 0x00, 0x00, 0x00,
0x00, 0x00,
0x00, 0x00, 0x00, 0x06, 0x03, 0x0a,
- 0x28, 0x1e, 0x28, 0x89, 0x20,
+ 0x28, 0x1e, 0x20, 0x89, 0x20,
0x00, 0x00, 0x02, 0x03, 0x0f, 0x0c
};
+
+/* "Known" PAS202BCB registers:
+ 0x02 clock divider
+ 0x04 Variable framerate bits 6-11 (*)
+ 0x05 Var framerate bits 0-5, one must leave the 2 msb's at 0 !!
+ 0x07 Blue Gain
+ 0x08 Green Gain
+ 0x09 Red Gain
+ 0x0b offset sign bit (bit0 1 > negative offset)
+ 0x0c offset
+ 0x0e Unknown image is slightly brighter when bit 0 is 0, if reg0f is 0 too,
+ leave at 1 otherwise we get a jump in our exposure control
+ 0x0f Exposure 0-255, 0 = use full frame time, 255 = no exposure at all
+ 0x10 Master gain 0 - 31
+ 0x11 write 1 to apply changes
+ (*) The variable framerate control must never be set lower then 500
+ which sets the framerate at 30 / reg02, otherwise vsync is lost.
+*/
static const __u8 pas202_sensor_init[][8] = {
- {0xa0, 0x40, 0x02, 0x03, 0x00, 0x00, 0x00, 0x10},
+ /* Set the clock divider to 4 -> 30 / 4 = 7.5 fps, we would like
+ to set it lower, but for some reason the bridge starts missing
+ vsync's then */
+ {0xa0, 0x40, 0x02, 0x04, 0x00, 0x00, 0x00, 0x10},
{0xd0, 0x40, 0x04, 0x07, 0x34, 0x00, 0x09, 0x10},
{0xd0, 0x40, 0x08, 0x01, 0x00, 0x00, 0x01, 0x10},
- {0xd0, 0x40, 0x0C, 0x00, 0x0C, 0x00, 0x32, 0x10},
+ {0xd0, 0x40, 0x0C, 0x00, 0x0C, 0x01, 0x32, 0x10},
{0xd0, 0x40, 0x10, 0x00, 0x01, 0x00, 0x63, 0x10},
{0xa0, 0x40, 0x15, 0x70, 0x01, 0x00, 0x63, 0x10},
{0xa0, 0x40, 0x18, 0x00, 0x01, 0x00, 0x63, 0x10},
{0xa0, 0x40, 0x11, 0x01, 0x01, 0x00, 0x63, 0x10},
{0xa0, 0x40, 0x03, 0x56, 0x01, 0x00, 0x63, 0x10},
{0xa0, 0x40, 0x11, 0x01, 0x01, 0x00, 0x63, 0x10},
- {0xb0, 0x40, 0x04, 0x07, 0x2a, 0x00, 0x63, 0x10},
- {0xb0, 0x40, 0x0e, 0x00, 0x3d, 0x00, 0x63, 0x10},
-
- {0xa0, 0x40, 0x11, 0x01, 0x3d, 0x00, 0x63, 0x16},
- {0xa0, 0x40, 0x10, 0x08, 0x3d, 0x00, 0x63, 0x15},
- {0xa0, 0x40, 0x02, 0x04, 0x3d, 0x00, 0x63, 0x16},
- {0xa0, 0x40, 0x11, 0x01, 0x3d, 0x00, 0x63, 0x16},
- {0xb0, 0x40, 0x0e, 0x00, 0x31, 0x00, 0x63, 0x16},
- {0xa0, 0x40, 0x11, 0x01, 0x31, 0x00, 0x63, 0x16},
- {0xa0, 0x40, 0x10, 0x0e, 0x31, 0x00, 0x63, 0x15},
- {0xa0, 0x40, 0x11, 0x01, 0x31, 0x00, 0x63, 0x16},
};
-static const __u8 initTas5110[] = {
+static const __u8 initTas5110c[] = {
0x44, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x11, 0x00, 0x00, 0x00,
0x00, 0x00,
- 0x00, 0x01, 0x00, 0x45, 0x09, 0x0a,
+ 0x00, 0x00, 0x00, 0x45, 0x09, 0x0a,
+ 0x16, 0x12, 0x60, 0x86, 0x2b,
+ 0x14, 0x0a, 0x02, 0x02, 0x09, 0x07
+};
+/* Same as above, except a different hstart */
+static const __u8 initTas5110d[] = {
+ 0x44, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x11, 0x00, 0x00, 0x00,
+ 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x41, 0x09, 0x0a,
0x16, 0x12, 0x60, 0x86, 0x2b,
0x14, 0x0a, 0x02, 0x02, 0x09, 0x07
};
@@ -476,7 +539,7 @@
static const __u8 initTas5130[] = {
0x04, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x11, 0x00, 0x00, 0x00,
0x00, 0x00,
- 0x00, 0x01, 0x00, 0x68, 0x0c, 0x0a,
+ 0x00, 0x00, 0x00, 0x68, 0x0c, 0x0a,
0x28, 0x1e, 0x60, COMP, MCK_INIT,
0x18, 0x10, 0x04, 0x03, 0x11, 0x0c
};
@@ -493,12 +556,14 @@
SENS(initOv6650, NULL, ov6650_sensor_init, NULL, NULL, F_GAIN|F_SIF, 0, 0x60),
SENS(initOv7630, initOv7630_3, ov7630_sensor_init, NULL, ov7630_sensor_init_3,
F_GAIN, 0, 0x21),
-SENS(initPas106, NULL, pas106_sensor_init, NULL, NULL, F_SIF, NO_EXPO|NO_FREQ,
+SENS(initPas106, NULL, pas106_sensor_init, NULL, NULL, F_GAIN|F_SIF, NO_FREQ,
0),
-SENS(initPas202, initPas202, pas202_sensor_init, NULL, NULL, 0,
- NO_EXPO|NO_FREQ, 0),
-SENS(initTas5110, NULL, tas5110_sensor_init, NULL, NULL, F_GAIN|F_SIF,
- NO_BRIGHTNESS|NO_FREQ, 0),
+SENS(initPas202, initPas202, pas202_sensor_init, NULL, NULL, F_GAIN,
+ NO_FREQ, 0),
+SENS(initTas5110c, NULL, tas5110_sensor_init, NULL, NULL,
+ F_GAIN|F_SIF|F_COARSE_EXPO, NO_BRIGHTNESS|NO_FREQ, 0),
+SENS(initTas5110d, NULL, tas5110_sensor_init, NULL, NULL,
+ F_GAIN|F_SIF|F_COARSE_EXPO, NO_BRIGHTNESS|NO_FREQ, 0),
SENS(initTas5130, NULL, tas5130_sensor_init, NULL, NULL, 0, NO_EXPO|NO_FREQ,
0),
};
@@ -587,42 +652,28 @@
goto err;
break;
}
- case SENSOR_PAS106: {
- __u8 i2c1[] =
- {0xa1, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x14};
-
- i2c1[3] = sd->brightness >> 3;
- i2c1[2] = 0x0e;
- if (i2c_w(gspca_dev, i2c1) < 0)
- goto err;
- i2c1[3] = 0x01;
- i2c1[2] = 0x13;
- if (i2c_w(gspca_dev, i2c1) < 0)
- goto err;
- break;
- }
+ case SENSOR_PAS106:
case SENSOR_PAS202: {
- /* __u8 i2cpexpo1[] =
- {0xb0, 0x40, 0x04, 0x07, 0x2a, 0x00, 0x63, 0x16}; */
- __u8 i2cpexpo[] =
- {0xb0, 0x40, 0x0e, 0x01, 0xab, 0x00, 0x63, 0x16};
- __u8 i2cp202[] =
- {0xa0, 0x40, 0x10, 0x0e, 0x31, 0x00, 0x63, 0x15};
- static __u8 i2cpdoit[] =
- {0xa0, 0x40, 0x11, 0x01, 0x31, 0x00, 0x63, 0x16};
+ __u8 i2cpbright[] =
+ {0xb0, 0x40, 0x0b, 0x00, 0x00, 0x00, 0x00, 0x16};
+ __u8 i2cpdoit[] =
+ {0xa0, 0x40, 0x11, 0x01, 0x00, 0x00, 0x00, 0x16};
- /* change reg 0x10 */
- i2cpexpo[4] = 0xff - sd->brightness;
-/* if(i2c_w(gspca_dev,i2cpexpo1) < 0)
- goto err; */
-/* if(i2c_w(gspca_dev,i2cpdoit) < 0)
- goto err; */
- if (i2c_w(gspca_dev, i2cpexpo) < 0)
- goto err;
- if (i2c_w(gspca_dev, i2cpdoit) < 0)
- goto err;
- i2cp202[3] = sd->brightness >> 3;
- if (i2c_w(gspca_dev, i2cp202) < 0)
+ /* PAS106 uses reg 7 and 8 instead of b and c */
+ if (sd->sensor == SENSOR_PAS106) {
+ i2cpbright[2] = 7;
+ i2cpdoit[2] = 0x13;
+ }
+
+ if (sd->brightness < 127) {
+ /* change reg 0x0b, signreg */
+ i2cpbright[3] = 0x01;
+ /* set reg 0x0c, offset */
+ i2cpbright[4] = 127 - sd->brightness;
+ } else
+ i2cpbright[4] = sd->brightness - 127;
+
+ if (i2c_w(gspca_dev, i2cpbright) < 0)
goto err;
if (i2c_w(gspca_dev, i2cpdoit) < 0)
goto err;
@@ -652,7 +703,8 @@
switch (sd->sensor) {
- case SENSOR_TAS5110: {
+ case SENSOR_TAS5110C:
+ case SENSOR_TAS5110D: {
__u8 i2c[] =
{0x30, 0x11, 0x02, 0x20, 0x70, 0x00, 0x00, 0x10};
@@ -674,6 +726,37 @@
goto err;
break;
}
+ case SENSOR_PAS106:
+ case SENSOR_PAS202: {
+ __u8 i2cpgain[] =
+ {0xa0, 0x40, 0x10, 0x00, 0x00, 0x00, 0x00, 0x15};
+ __u8 i2cpcolorgain[] =
+ {0xc0, 0x40, 0x07, 0x00, 0x00, 0x00, 0x00, 0x15};
+ __u8 i2cpdoit[] =
+ {0xa0, 0x40, 0x11, 0x01, 0x00, 0x00, 0x00, 0x16};
+
+ /* PAS106 uses different regs (and has split green gains) */
+ if (sd->sensor == SENSOR_PAS106) {
+ i2cpgain[2] = 0x0e;
+ i2cpcolorgain[0] = 0xd0;
+ i2cpcolorgain[2] = 0x09;
+ i2cpdoit[2] = 0x13;
+ }
+
+ i2cpgain[3] = sd->gain >> 3;
+ i2cpcolorgain[3] = sd->gain >> 4;
+ i2cpcolorgain[4] = sd->gain >> 4;
+ i2cpcolorgain[5] = sd->gain >> 4;
+ i2cpcolorgain[6] = sd->gain >> 4;
+
+ if (i2c_w(gspca_dev, i2cpgain) < 0)
+ goto err;
+ if (i2c_w(gspca_dev, i2cpcolorgain) < 0)
+ goto err;
+ if (i2c_w(gspca_dev, i2cpdoit) < 0)
+ goto err;
+ break;
+ }
}
return;
err:
@@ -684,19 +767,21 @@
{
struct sd *sd = (struct sd *) gspca_dev;
__u8 gain;
- __u8 rgb_value;
+ __u8 buf[2] = { 0, 0 };
+
+ if (sensor_data[sd->sensor].flags & F_GAIN) {
+ /* Use the sensor gain to do the actual gain */
+ setsensorgain(gspca_dev);
+ return;
+ }
gain = sd->gain >> 4;
/* red and blue gain */
- rgb_value = gain << 4 | gain;
- reg_w(gspca_dev, 0x10, &rgb_value, 1);
+ buf[0] = gain << 4 | gain;
/* green gain */
- rgb_value = gain;
- reg_w(gspca_dev, 0x11, &rgb_value, 1);
-
- if (sensor_data[sd->sensor].flags & F_GAIN)
- setsensorgain(gspca_dev);
+ buf[1] = gain;
+ reg_w(gspca_dev, 0x10, buf, 2);
}
static void setexposure(struct gspca_dev *gspca_dev)
@@ -704,17 +789,12 @@
struct sd *sd = (struct sd *) gspca_dev;
switch (sd->sensor) {
- case SENSOR_TAS5110: {
- __u8 reg;
-
+ case SENSOR_TAS5110C:
+ case SENSOR_TAS5110D: {
/* register 19's high nibble contains the sn9c10x clock divider
The high nibble configures the no fps according to the
formula: 60 / high_nibble. With a maximum of 30 fps */
- reg = 120 * sd->exposure / 1000;
- if (reg < 2)
- reg = 2;
- else if (reg > 15)
- reg = 15;
+ __u8 reg = sd->exposure;
reg = (reg << 4) | 0x0b;
reg_w(gspca_dev, 0x19, ®, 1);
break;
@@ -750,20 +830,21 @@
} else
reg10_max = 0x41;
- reg11 = (60 * sd->exposure + 999) / 1000;
+ reg11 = (15 * sd->exposure + 999) / 1000;
if (reg11 < 1)
reg11 = 1;
else if (reg11 > 16)
reg11 = 16;
- /* In 640x480, if the reg11 has less than 3, the image is
- unstable (not enough bandwidth). */
- if (gspca_dev->width == 640 && reg11 < 3)
- reg11 = 3;
+ /* In 640x480, if the reg11 has less than 4, the image is
+ unstable (the bridge goes into a higher compression mode
+ which we have not reverse engineered yet). */
+ if (gspca_dev->width == 640 && reg11 < 4)
+ reg11 = 4;
/* frame exposure time in ms = 1000 * reg11 / 30 ->
- reg10 = sd->exposure * 2 * reg10_max / (1000 * reg11 / 30) */
- reg10 = (sd->exposure * 60 * reg10_max) / (1000 * reg11);
+ reg10 = (sd->exposure / 2) * reg10_max / (1000 * reg11 / 30) */
+ reg10 = (sd->exposure * 15 * reg10_max) / (1000 * reg11);
/* Don't allow this to get below 10 when using autogain, the
steps become very large (relatively) when below 10 causing
@@ -786,10 +867,85 @@
if (i2c_w(gspca_dev, i2c) == 0)
sd->reg11 = reg11;
else
- PDEBUG(D_ERR, "i2c error exposure");
+ goto err;
+ break;
+ }
+ case SENSOR_PAS202: {
+ __u8 i2cpframerate[] =
+ {0xb0, 0x40, 0x04, 0x00, 0x00, 0x00, 0x00, 0x16};
+ __u8 i2cpexpo[] =
+ {0xa0, 0x40, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x16};
+ const __u8 i2cpdoit[] =
+ {0xa0, 0x40, 0x11, 0x01, 0x00, 0x00, 0x00, 0x16};
+ int framerate_ctrl;
+
+ /* The exposure knee for the autogain algorithm is 200
+ (100 ms / 10 fps on other sensors), for values below this
+ use the control for setting the partial frame expose time,
+ above that use variable framerate. This way we run at max
+ framerate (640x480@7.5 fps, 320x240@10fps) until the knee
+ is reached. Using the variable framerate control above 200
+ is better then playing around with both clockdiv + partial
+ frame exposure times (like we are doing with the ov chips),
+ as that sometimes leads to jumps in the exposure control,
+ which are bad for auto exposure. */
+ if (sd->exposure < 200) {
+ i2cpexpo[3] = 255 - (sd->exposure * 255) / 200;
+ framerate_ctrl = 500;
+ } else {
+ /* The PAS202's exposure control goes from 0 - 4095,
+ but anything below 500 causes vsync issues, so scale
+ our 200-1023 to 500-4095 */
+ framerate_ctrl = (sd->exposure - 200) * 1000 / 229 +
+ 500;
+ }
+
+ i2cpframerate[3] = framerate_ctrl >> 6;
+ i2cpframerate[4] = framerate_ctrl & 0x3f;
+ if (i2c_w(gspca_dev, i2cpframerate) < 0)
+ goto err;
+ if (i2c_w(gspca_dev, i2cpexpo) < 0)
+ goto err;
+ if (i2c_w(gspca_dev, i2cpdoit) < 0)
+ goto err;
+ break;
+ }
+ case SENSOR_PAS106: {
+ __u8 i2cpframerate[] =
+ {0xb1, 0x40, 0x03, 0x00, 0x00, 0x00, 0x00, 0x14};
+ __u8 i2cpexpo[] =
+ {0xa1, 0x40, 0x05, 0x00, 0x00, 0x00, 0x00, 0x14};
+ const __u8 i2cpdoit[] =
+ {0xa1, 0x40, 0x13, 0x01, 0x00, 0x00, 0x00, 0x14};
+ int framerate_ctrl;
+
+ /* For values below 150 use partial frame exposure, above
+ that use framerate ctrl */
+ if (sd->exposure < 150) {
+ i2cpexpo[3] = 150 - sd->exposure;
+ framerate_ctrl = 300;
+ } else {
+ /* The PAS106's exposure control goes from 0 - 4095,
+ but anything below 300 causes vsync issues, so scale
+ our 150-1023 to 300-4095 */
+ framerate_ctrl = (sd->exposure - 150) * 1000 / 230 +
+ 300;
+ }
+
+ i2cpframerate[3] = framerate_ctrl >> 4;
+ i2cpframerate[4] = framerate_ctrl & 0x0f;
+ if (i2c_w(gspca_dev, i2cpframerate) < 0)
+ goto err;
+ if (i2c_w(gspca_dev, i2cpexpo) < 0)
+ goto err;
+ if (i2c_w(gspca_dev, i2cpdoit) < 0)
+ goto err;
break;
}
}
+ return;
+err:
+ PDEBUG(D_ERR, "i2c error exposure");
}
static void setfreq(struct gspca_dev *gspca_dev)
@@ -823,30 +979,43 @@
}
}
+#include "coarse_expo_autogain.h"
+
static void do_autogain(struct gspca_dev *gspca_dev)
{
- int deadzone, desired_avg_lum;
+ int deadzone, desired_avg_lum, result;
struct sd *sd = (struct sd *) gspca_dev;
int avg_lum = atomic_read(&sd->avg_lum);
- if (avg_lum == -1)
+ if (avg_lum == -1 || !sd->autogain)
return;
+ if (sd->autogain_ignore_frames > 0) {
+ sd->autogain_ignore_frames--;
+ return;
+ }
+
/* SIF / VGA sensors have a different autoexposure area and thus
different avg_lum values for the same picture brightness */
if (sensor_data[sd->sensor].flags & F_SIF) {
- deadzone = 1000;
- desired_avg_lum = 7000;
+ deadzone = 500;
+ /* SIF sensors tend to overexpose, so keep this small */
+ desired_avg_lum = 5000;
} else {
- deadzone = 3000;
- desired_avg_lum = 23000;
+ deadzone = 1500;
+ desired_avg_lum = 18000;
}
- if (sd->autogain_ignore_frames > 0)
- sd->autogain_ignore_frames--;
- else if (gspca_auto_gain_n_exposure(gspca_dev, avg_lum,
- sd->brightness * desired_avg_lum / 127,
- deadzone, GAIN_KNEE, EXPOSURE_KNEE)) {
+ if (sensor_data[sd->sensor].flags & F_COARSE_EXPO)
+ result = gspca_coarse_grained_expo_autogain(gspca_dev, avg_lum,
+ sd->brightness * desired_avg_lum / 127,
+ deadzone);
+ else
+ result = gspca_auto_gain_n_exposure(gspca_dev, avg_lum,
+ sd->brightness * desired_avg_lum / 127,
+ deadzone, GAIN_KNEE, EXPOSURE_KNEE);
+
+ if (result) {
PDEBUG(D_FRAM, "autogain: gain changed: gain: %d expo: %d",
(int)sd->gain, (int)sd->exposure);
sd->autogain_ignore_frames = AUTOGAIN_IGNORE_FRAMES;
@@ -881,7 +1050,13 @@
sd->brightness = BRIGHTNESS_DEF;
sd->gain = GAIN_DEF;
- sd->exposure = EXPOSURE_DEF;
+ if (sensor_data[sd->sensor].flags & F_COARSE_EXPO) {
+ sd->exposure = COARSE_EXPOSURE_DEF;
+ gspca_dev->ctrl_dis |= (1 << EXPOSURE_IDX);
+ } else {
+ sd->exposure = EXPOSURE_DEF;
+ gspca_dev->ctrl_dis |= (1 << COARSE_EXPOSURE_IDX);
+ }
if (gspca_dev->ctrl_dis & (1 << AUTOGAIN_IDX))
sd->autogain = 0; /* Disable do_autogain callback */
else
@@ -917,9 +1092,6 @@
reg12_19[6] = sn9c10x[0x18 - 1] | (mode << 4);
/* Special cases where reg 17 and or 19 value depends on mode */
switch (sd->sensor) {
- case SENSOR_PAS202:
- reg12_19[5] = mode ? 0x24 : 0x20;
- break;
case SENSOR_TAS5130CXX:
/* probably not mode specific at all most likely the upper
nibble of 0x19 is exposure (clock divider) just as with
@@ -955,6 +1127,16 @@
sensor_data[sd->sensor].sensor_bridge_init_size[
sd->bridge]);
+ /* Mode specific sensor setup */
+ switch (sd->sensor) {
+ case SENSOR_PAS202: {
+ const __u8 i2cpclockdiv[] =
+ {0xa0, 0x40, 0x02, 0x03, 0x00, 0x00, 0x00, 0x10};
+ /* clockdiv from 4 to 3 (7.5 -> 10 fps) when in low res mode */
+ if (mode)
+ i2c_w(gspca_dev, i2cpclockdiv);
+ }
+ }
/* H_size V_size 0x28, 0x1e -> 640x480. 0x16, 0x12 -> 352x288 */
reg_w(gspca_dev, 0x15, ®12_19[3], 2);
/* compression register */
@@ -985,6 +1167,8 @@
sd->frames_to_drop = 0;
sd->autogain_ignore_frames = 0;
+ sd->exp_too_high_cnt = 0;
+ sd->exp_too_low_cnt = 0;
atomic_set(&sd->avg_lum, -1);
return 0;
}
@@ -1143,11 +1327,14 @@
struct sd *sd = (struct sd *) gspca_dev;
sd->autogain = val;
+ sd->exp_too_high_cnt = 0;
+ sd->exp_too_low_cnt = 0;
+
/* when switching to autogain set defaults to make sure
we are on a valid point of the autogain gain /
exposure knee graph, and give this change time to
take effect before doing autogain. */
- if (sd->autogain) {
+ if (sd->autogain && !(sensor_data[sd->sensor].flags & F_COARSE_EXPO)) {
sd->exposure = EXPOSURE_DEF;
sd->gain = GAIN_DEF;
if (gspca_dev->streaming) {
@@ -1207,6 +1394,25 @@
return -EINVAL;
}
+#ifdef CONFIG_INPUT
+static int sd_int_pkt_scan(struct gspca_dev *gspca_dev,
+ u8 *data, /* interrupt packet data */
+ int len) /* interrupt packet length */
+{
+ int ret = -EINVAL;
+
+ if (len == 1 && data[0] == 1) {
+ input_report_key(gspca_dev->input_dev, KEY_CAMERA, 1);
+ input_sync(gspca_dev->input_dev);
+ input_report_key(gspca_dev->input_dev, KEY_CAMERA, 0);
+ input_sync(gspca_dev->input_dev);
+ ret = 0;
+ }
+
+ return ret;
+}
+#endif
+
/* sub-driver description */
static const struct sd_desc sd_desc = {
.name = MODULE_NAME,
@@ -1219,6 +1425,9 @@
.pkt_scan = sd_pkt_scan,
.querymenu = sd_querymenu,
.dq_callback = do_autogain,
+#ifdef CONFIG_INPUT
+ .int_pkt_scan = sd_int_pkt_scan,
+#endif
};
/* -- module initialisation -- */
@@ -1227,21 +1436,21 @@
static const struct usb_device_id device_table[] __devinitconst = {
- {USB_DEVICE(0x0c45, 0x6001), SB(TAS5110, 102)}, /* TAS5110C1B */
- {USB_DEVICE(0x0c45, 0x6005), SB(TAS5110, 101)}, /* TAS5110C1B */
+ {USB_DEVICE(0x0c45, 0x6001), SB(TAS5110C, 102)}, /* TAS5110C1B */
+ {USB_DEVICE(0x0c45, 0x6005), SB(TAS5110C, 101)}, /* TAS5110C1B */
#if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE
- {USB_DEVICE(0x0c45, 0x6007), SB(TAS5110, 101)}, /* TAS5110D */
+ {USB_DEVICE(0x0c45, 0x6007), SB(TAS5110D, 101)}, /* TAS5110D */
+#endif
{USB_DEVICE(0x0c45, 0x6009), SB(PAS106, 101)},
{USB_DEVICE(0x0c45, 0x600d), SB(PAS106, 101)},
-#endif
{USB_DEVICE(0x0c45, 0x6011), SB(OV6650, 101)},
#if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE
{USB_DEVICE(0x0c45, 0x6019), SB(OV7630, 101)},
{USB_DEVICE(0x0c45, 0x6024), SB(TAS5130CXX, 102)},
{USB_DEVICE(0x0c45, 0x6025), SB(TAS5130CXX, 102)},
+#endif
{USB_DEVICE(0x0c45, 0x6028), SB(PAS202, 102)},
{USB_DEVICE(0x0c45, 0x6029), SB(PAS106, 102)},
-#endif
{USB_DEVICE(0x0c45, 0x602c), SB(OV7630, 102)},
{USB_DEVICE(0x0c45, 0x602d), SB(HV7131R, 102)},
#if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE
diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c
index 0bd36a0..83d5773 100644
--- a/drivers/media/video/gspca/sonixj.c
+++ b/drivers/media/video/gspca/sonixj.c
@@ -21,6 +21,7 @@
#define MODULE_NAME "sonixj"
+#include <linux/input.h>
#include "gspca.h"
#include "jpeg.h"
@@ -45,6 +46,7 @@
u8 red;
u8 gamma;
u8 vflip; /* ov7630/ov7648 only */
+ u8 sharpness;
u8 infrared; /* mt9v111 only */
u8 freq; /* ov76xx only */
u8 quality; /* image quality */
@@ -64,16 +66,17 @@
#define BRIDGE_SN9C110 2
#define BRIDGE_SN9C120 3
u8 sensor; /* Type of image sensor chip */
-#define SENSOR_HV7131R 0
-#define SENSOR_MI0360 1
-#define SENSOR_MO4000 2
-#define SENSOR_MT9V111 3
-#define SENSOR_OM6802 4
-#define SENSOR_OV7630 5
-#define SENSOR_OV7648 6
-#define SENSOR_OV7660 7
-#define SENSOR_PO1030 8
-#define SENSOR_SP80708 9
+#define SENSOR_ADCM1700 0
+#define SENSOR_HV7131R 1
+#define SENSOR_MI0360 2
+#define SENSOR_MO4000 3
+#define SENSOR_MT9V111 4
+#define SENSOR_OM6802 5
+#define SENSOR_OV7630 6
+#define SENSOR_OV7648 7
+#define SENSOR_OV7660 8
+#define SENSOR_PO1030 9
+#define SENSOR_SP80708 10
u8 i2c_addr;
u8 *jpeg_hdr;
@@ -96,12 +99,14 @@
static int sd_getautogain(struct gspca_dev *gspca_dev, __s32 *val);
static int sd_setvflip(struct gspca_dev *gspca_dev, __s32 val);
static int sd_getvflip(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_setsharpness(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getsharpness(struct gspca_dev *gspca_dev, __s32 *val);
static int sd_setinfrared(struct gspca_dev *gspca_dev, __s32 val);
static int sd_getinfrared(struct gspca_dev *gspca_dev, __s32 *val);
static int sd_setfreq(struct gspca_dev *gspca_dev, __s32 val);
static int sd_getfreq(struct gspca_dev *gspca_dev, __s32 *val);
-static struct ctrl sd_ctrls[] = {
+static const struct ctrl sd_ctrls[] = {
#define BRIGHTNESS_IDX 0
{
{
@@ -225,8 +230,23 @@
.set = sd_setvflip,
.get = sd_getvflip,
},
+#define SHARPNESS_IDX 8
+ {
+ {
+ .id = V4L2_CID_SHARPNESS,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Sharpness",
+ .minimum = 0,
+ .maximum = 255,
+ .step = 1,
+#define SHARPNESS_DEF 90
+ .default_value = SHARPNESS_DEF,
+ },
+ .set = sd_setsharpness,
+ .get = sd_getsharpness,
+ },
/* mt9v111 only */
-#define INFRARED_IDX 8
+#define INFRARED_IDX 9
{
{
.id = V4L2_CID_INFRARED,
@@ -242,7 +262,7 @@
.get = sd_getinfrared,
},
/* ov7630/ov7648/ov7660 only */
-#define FREQ_IDX 9
+#define FREQ_IDX 10
{
{
.id = V4L2_CID_POWER_LINE_FREQUENCY,
@@ -261,28 +281,37 @@
/* table of the disabled controls */
static __u32 ctrl_dis[] = {
+ (1 << INFRARED_IDX) | (1 << VFLIP_IDX) | (1 << FREQ_IDX) |
+ (1 << AUTOGAIN_IDX), /* SENSOR_ADCM1700 0 */
+ (1 << INFRARED_IDX) | (1 << FREQ_IDX),
+ /* SENSOR_HV7131R 1 */
(1 << INFRARED_IDX) | (1 << VFLIP_IDX) | (1 << FREQ_IDX),
- /* SENSOR_HV7131R 0 */
+ /* SENSOR_MI0360 2 */
(1 << INFRARED_IDX) | (1 << VFLIP_IDX) | (1 << FREQ_IDX),
- /* SENSOR_MI0360 1 */
- (1 << INFRARED_IDX) | (1 << VFLIP_IDX) | (1 << FREQ_IDX),
- /* SENSOR_MO4000 2 */
+ /* SENSOR_MO4000 3 */
(1 << VFLIP_IDX) | (1 << FREQ_IDX),
- /* SENSOR_MT9V111 3 */
+ /* SENSOR_MT9V111 4 */
(1 << INFRARED_IDX) | (1 << VFLIP_IDX) | (1 << FREQ_IDX),
- /* SENSOR_OM6802 4 */
+ /* SENSOR_OM6802 5 */
(1 << INFRARED_IDX),
- /* SENSOR_OV7630 5 */
+ /* SENSOR_OV7630 6 */
(1 << INFRARED_IDX),
- /* SENSOR_OV7648 6 */
+ /* SENSOR_OV7648 7 */
(1 << AUTOGAIN_IDX) | (1 << INFRARED_IDX) | (1 << VFLIP_IDX),
- /* SENSOR_OV7660 7 */
+ /* SENSOR_OV7660 8 */
(1 << AUTOGAIN_IDX) | (1 << INFRARED_IDX) | (1 << VFLIP_IDX) |
- (1 << FREQ_IDX), /* SENSOR_PO1030 8 */
+ (1 << FREQ_IDX), /* SENSOR_PO1030 9 */
(1 << AUTOGAIN_IDX) | (1 << INFRARED_IDX) | (1 << VFLIP_IDX) |
- (1 << FREQ_IDX), /* SENSOR_SP80708 9 */
+ (1 << FREQ_IDX), /* SENSOR_SP80708 10 */
};
+static const struct v4l2_pix_format cif_mode[] = {
+ {352, 288, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+ .bytesperline = 352,
+ .sizeimage = 352 * 288 * 4 / 8 + 590,
+ .colorspace = V4L2_COLORSPACE_JPEG,
+ .priv = 0},
+};
static const struct v4l2_pix_format vga_mode[] = {
{160, 120, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
.bytesperline = 160,
@@ -302,6 +331,17 @@
.priv = 0},
};
+static const u8 sn_adcm1700[0x1c] = {
+/* reg0 reg1 reg2 reg3 reg4 reg5 reg6 reg7 */
+ 0x00, 0x43, 0x60, 0x00, 0x1a, 0x00, 0x00, 0x00,
+/* reg8 reg9 rega regb regc regd rege regf */
+ 0x80, 0x51, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+/* reg10 reg11 reg12 reg13 reg14 reg15 reg16 reg17 */
+ 0x03, 0x00, 0x05, 0x01, 0x05, 0x16, 0x12, 0x42,
+/* reg18 reg19 reg1a reg1b */
+ 0x06, 0x00, 0x00, 0x00
+};
+
/*Data from sn9c102p+hv7131r */
static const u8 sn_hv7131[0x1c] = {
/* reg0 reg1 reg2 reg3 reg4 reg5 reg6 reg7 */
@@ -415,6 +455,7 @@
/* sequence specific to the sensors - !! index = SENSOR_xxx */
static const u8 *sn_tb[] = {
+ sn_adcm1700,
sn_hv7131,
sn_mi0360,
sn_mo4000,
@@ -432,6 +473,11 @@
0x00, 0x2d, 0x46, 0x5a, 0x6c, 0x7c, 0x8b, 0x99,
0xa6, 0xb2, 0xbf, 0xca, 0xd5, 0xe0, 0xeb, 0xf5, 0xff
};
+/* gamma for sensor ADCM1700 */
+static const u8 gamma_spec_0[17] = {
+ 0x0f, 0x39, 0x5a, 0x74, 0x86, 0x95, 0xa6, 0xb4,
+ 0xbd, 0xc4, 0xcc, 0xd4, 0xd5, 0xde, 0xe4, 0xed, 0xf5
+};
/* gamma for sensors HV7131R and MT9V111 */
static const u8 gamma_spec_1[17] = {
0x08, 0x3a, 0x52, 0x65, 0x75, 0x83, 0x91, 0x9d,
@@ -450,6 +496,42 @@
0x3e, 0x00, 0xcd, 0x0f, 0xf7, 0x0f, /* VR VG VB */
0x00, 0x00, 0x00 /* YUV offsets */
};
+static const u8 adcm1700_sensor_init[][8] = {
+ {0xa0, 0x51, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x10},
+ {0xb0, 0x51, 0x04, 0x08, 0x00, 0x00, 0x00, 0x10}, /* reset */
+ {0xdd, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00},
+ {0xb0, 0x51, 0x04, 0x00, 0x00, 0x00, 0x00, 0x10},
+ {0xdd, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00},
+ {0xb0, 0x51, 0x0c, 0xe0, 0x2e, 0x00, 0x00, 0x10},
+ {0xb0, 0x51, 0x10, 0x02, 0x02, 0x00, 0x00, 0x10},
+ {0xb0, 0x51, 0x14, 0x0e, 0x0e, 0x00, 0x00, 0x10},
+ {0xb0, 0x51, 0x1c, 0x00, 0x80, 0x00, 0x00, 0x10},
+ {0xb0, 0x51, 0x20, 0x01, 0x00, 0x00, 0x00, 0x10},
+ {0xdd, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00},
+ {0xb0, 0x51, 0x04, 0x04, 0x00, 0x00, 0x00, 0x10},
+ {0xdd, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00},
+ {0xb0, 0x51, 0x04, 0x01, 0x00, 0x00, 0x00, 0x10},
+ {0xa0, 0x51, 0xfe, 0x10, 0x00, 0x00, 0x00, 0x10},
+ {0xb0, 0x51, 0x14, 0x01, 0x00, 0x00, 0x00, 0x10},
+ {0xb0, 0x51, 0x32, 0x00, 0x00, 0x00, 0x00, 0x10},
+ {}
+};
+static const u8 adcm1700_sensor_param1[][8] = {
+ {0xb0, 0x51, 0x26, 0xf9, 0x01, 0x00, 0x00, 0x10}, /* exposure? */
+ {0xd0, 0x51, 0x1e, 0x8e, 0x8e, 0x8e, 0x8e, 0x10},
+
+ {0xa0, 0x51, 0xfe, 0x01, 0x00, 0x00, 0x00, 0x10},
+ {0xb0, 0x51, 0x00, 0x02, 0x00, 0x00, 0x00, 0x10},
+ {0xa0, 0x51, 0xfe, 0x10, 0x00, 0x00, 0x00, 0x10},
+ {0xb0, 0x51, 0x32, 0x00, 0x72, 0x00, 0x00, 0x10},
+ {0xd0, 0x51, 0x1e, 0xbe, 0xd7, 0xe8, 0xbe, 0x10}, /* exposure? */
+
+ {0xa0, 0x51, 0xfe, 0x01, 0x00, 0x00, 0x00, 0x10},
+ {0xb0, 0x51, 0x00, 0x02, 0x00, 0x00, 0x00, 0x10},
+ {0xa0, 0x51, 0xfe, 0x10, 0x00, 0x00, 0x00, 0x10},
+ {0xb0, 0x51, 0x32, 0x00, 0xa2, 0x00, 0x00, 0x10},
+ {}
+};
static const u8 hv7131r_sensor_init[][8] = {
{0xc1, 0x11, 0x01, 0x08, 0x01, 0x00, 0x00, 0x10},
{0xb1, 0x11, 0x34, 0x17, 0x7f, 0x00, 0x00, 0x10},
@@ -986,17 +1068,18 @@
{}
};
-static const u8 (*sensor_init[10])[8] = {
- hv7131r_sensor_init, /* HV7131R 0 */
- mi0360_sensor_init, /* MI0360 1 */
- mo4000_sensor_init, /* MO4000 2 */
- mt9v111_sensor_init, /* MT9V111 3 */
- om6802_sensor_init, /* OM6802 4 */
- ov7630_sensor_init, /* OV7630 5 */
- ov7648_sensor_init, /* OV7648 6 */
- ov7660_sensor_init, /* OV7660 7 */
- po1030_sensor_init, /* PO1030 8 */
- sp80708_sensor_init, /* SP80708 9 */
+static const u8 (*sensor_init[11])[8] = {
+ adcm1700_sensor_init, /* ADCM1700 0 */
+ hv7131r_sensor_init, /* HV7131R 1 */
+ mi0360_sensor_init, /* MI0360 2 */
+ mo4000_sensor_init, /* MO4000 3 */
+ mt9v111_sensor_init, /* MT9V111 4 */
+ om6802_sensor_init, /* OM6802 5 */
+ ov7630_sensor_init, /* OV7630 6 */
+ ov7648_sensor_init, /* OV7648 7 */
+ ov7660_sensor_init, /* OV7660 8 */
+ po1030_sensor_init, /* PO1030 9 */
+ sp80708_sensor_init, /* SP80708 10 */
};
/* read <len> bytes to gspca_dev->usb_buf */
@@ -1064,6 +1147,7 @@
PDEBUG(D_USBO, "i2c_w2 [%02x] = %02x", reg, val);
switch (sd->sensor) {
+ case SENSOR_ADCM1700:
case SENSOR_OM6802: /* i2c command = a0 (100 kHz) */
gspca_dev->usb_buf[0] = 0x80 | (2 << 4);
break;
@@ -1110,6 +1194,7 @@
u8 mode[8];
switch (sd->sensor) {
+ case SENSOR_ADCM1700:
case SENSOR_OM6802: /* i2c command = 90 (100 kHz) */
mode[0] = 0x80 | 0x10;
break;
@@ -1260,7 +1345,8 @@
{0x00, 0x40, 0x38, 0x30, 0x00, 0x20};
static const u8 regd4[] = {0x60, 0x00, 0x00};
- reg_w1(gspca_dev, 0xf1, 0x00);
+ /* sensor clock already enabled in sd_init */
+ /* reg_w1(gspca_dev, 0xf1, 0x00); */
reg_w1(gspca_dev, 0x01, sn9c1xx[1]);
/* configure gpio */
@@ -1284,6 +1370,12 @@
reg_w(gspca_dev, 0x03, &sn9c1xx[3], 0x0f);
switch (sd->sensor) {
+ case SENSOR_ADCM1700:
+ reg_w1(gspca_dev, 0x01, 0x43);
+ reg_w1(gspca_dev, 0x17, 0x62);
+ reg_w1(gspca_dev, 0x01, 0x42);
+ reg_w1(gspca_dev, 0x01, 0x42);
+ break;
case SENSOR_MT9V111:
reg_w1(gspca_dev, 0x01, 0x61);
reg_w1(gspca_dev, 0x17, 0x61);
@@ -1357,14 +1449,19 @@
struct sd *sd = (struct sd *) gspca_dev;
struct cam *cam;
- cam = &gspca_dev->cam;
- cam->cam_mode = vga_mode;
- cam->nmodes = ARRAY_SIZE(vga_mode);
- cam->npkt = 24; /* 24 packets per ISOC message */
-
sd->bridge = id->driver_info >> 16;
sd->sensor = id->driver_info;
+ cam = &gspca_dev->cam;
+ if (sd->sensor == SENSOR_ADCM1700) {
+ cam->cam_mode = cif_mode;
+ cam->nmodes = ARRAY_SIZE(cif_mode);
+ } else {
+ cam->cam_mode = vga_mode;
+ cam->nmodes = ARRAY_SIZE(vga_mode);
+ }
+ cam->npkt = 24; /* 24 packets per ISOC message */
+
sd->brightness = BRIGHTNESS_DEF;
sd->contrast = CONTRAST_DEF;
sd->colors = COLOR_DEF;
@@ -1374,6 +1471,14 @@
sd->autogain = AUTOGAIN_DEF;
sd->ag_cnt = -1;
sd->vflip = VFLIP_DEF;
+ switch (sd->sensor) {
+ case SENSOR_OM6802:
+ sd->sharpness = 0x10;
+ break;
+ default:
+ sd->sharpness = SHARPNESS_DEF;
+ break;
+ }
sd->infrared = INFRARED_DEF;
sd->freq = FREQ_DEF;
sd->quality = QUALITY_DEF;
@@ -1433,7 +1538,9 @@
break;
}
- reg_w1(gspca_dev, 0xf1, 0x01);
+ /* Note we do not disable the sensor clock here (power saving mode),
+ as that also disables the button on the cam. */
+ reg_w1(gspca_dev, 0xf1, 0x00);
/* set the i2c address */
sn9c1xx = sn_tb[sd->sensor];
@@ -1543,6 +1650,10 @@
k2 = ((int) sd->brightness - 0x8000) >> 10;
switch (sd->sensor) {
+ case SENSOR_ADCM1700:
+ if (k2 > 0x1f)
+ k2 = 0; /* only positive Y offset */
+ break;
case SENSOR_HV7131R:
expo = sd->brightness << 4;
if (expo > 0x002dc6c0)
@@ -1625,6 +1736,9 @@
};
switch (sd->sensor) {
+ case SENSOR_ADCM1700:
+ gamma_base = gamma_spec_0;
+ break;
case SENSOR_HV7131R:
case SENSOR_MT9V111:
gamma_base = gamma_spec_1;
@@ -1670,23 +1784,39 @@
sd->ag_cnt = -1;
}
-/* ov7630/ov7648 only */
+/* hv7131r/ov7630/ov7648 only */
static void setvflip(struct sd *sd)
{
u8 comn;
if (sd->gspca_dev.ctrl_dis & (1 << VFLIP_IDX))
return;
- if (sd->sensor == SENSOR_OV7630) {
+ switch (sd->sensor) {
+ case SENSOR_HV7131R:
+ comn = 0x18; /* clkdiv = 1, ablcen = 1 */
+ if (sd->vflip)
+ comn |= 0x01;
+ i2c_w1(&sd->gspca_dev, 0x01, comn); /* sctra */
+ break;
+ case SENSOR_OV7630:
comn = 0x02;
if (!sd->vflip)
comn |= 0x80;
- } else {
+ i2c_w1(&sd->gspca_dev, 0x75, comn);
+ break;
+ default:
+/* case SENSOR_OV7648: */
comn = 0x06;
if (sd->vflip)
comn |= 0x80;
+ i2c_w1(&sd->gspca_dev, 0x75, comn);
+ break;
}
- i2c_w1(&sd->gspca_dev, 0x75, comn);
+}
+
+static void setsharpness(struct sd *sd)
+{
+ reg_w1(&sd->gspca_dev, 0x99, sd->sharpness);
}
static void setinfrared(struct sd *sd)
@@ -1804,6 +1934,8 @@
int mode;
static const u8 C0[] = { 0x2d, 0x2d, 0x3a, 0x05, 0x04, 0x3f };
static const u8 CA[] = { 0x28, 0xd8, 0x14, 0xec };
+ static const u8 CA_adcm1700[] =
+ { 0x14, 0xec, 0x0a, 0xf6 };
static const u8 CE[] = { 0x32, 0xdd, 0x2d, 0xdd }; /* MI0360 */
static const u8 CE_ov76xx[] =
{ 0x32, 0xdd, 0x32, 0xdd };
@@ -1824,6 +1956,9 @@
i2c_w_seq(gspca_dev, sensor_init[sd->sensor]);
switch (sd->sensor) {
+ case SENSOR_ADCM1700:
+ reg2 = 0x60;
+ break;
case SENSOR_OM6802:
reg2 = 0x71;
break;
@@ -1842,17 +1977,28 @@
reg_w1(gspca_dev, 0x12, sn9c1xx[0x12]);
reg_w1(gspca_dev, 0x13, sn9c1xx[0x13]);
reg_w1(gspca_dev, 0x18, sn9c1xx[0x18]);
- reg_w1(gspca_dev, 0xd2, 0x6a); /* DC29 */
- reg_w1(gspca_dev, 0xd3, 0x50);
+ if (sd->sensor == SENSOR_ADCM1700) {
+ reg_w1(gspca_dev, 0xd2, 0x3a); /* AE_H_SIZE = 116 */
+ reg_w1(gspca_dev, 0xd3, 0x30); /* AE_V_SIZE = 96 */
+ } else {
+ reg_w1(gspca_dev, 0xd2, 0x6a); /* AE_H_SIZE = 212 */
+ reg_w1(gspca_dev, 0xd3, 0x50); /* AE_V_SIZE = 160 */
+ }
reg_w1(gspca_dev, 0xc6, 0x00);
reg_w1(gspca_dev, 0xc7, 0x00);
- reg_w1(gspca_dev, 0xc8, 0x50);
- reg_w1(gspca_dev, 0xc9, 0x3c);
+ if (sd->sensor == SENSOR_ADCM1700) {
+ reg_w1(gspca_dev, 0xc8, 0x2c); /* AW_H_STOP = 352 */
+ reg_w1(gspca_dev, 0xc9, 0x24); /* AW_V_STOP = 288 */
+ } else {
+ reg_w1(gspca_dev, 0xc8, 0x50); /* AW_H_STOP = 640 */
+ reg_w1(gspca_dev, 0xc9, 0x3c); /* AW_V_STOP = 480 */
+ }
reg_w1(gspca_dev, 0x18, sn9c1xx[0x18]);
switch (sd->sensor) {
case SENSOR_MT9V111:
reg17 = 0xe0;
break;
+ case SENSOR_ADCM1700:
case SENSOR_OV7630:
reg17 = 0xe2;
break;
@@ -1870,44 +2016,39 @@
break;
}
reg_w1(gspca_dev, 0x17, reg17);
-/* set reg1 was here */
- reg_w1(gspca_dev, 0x05, sn9c1xx[5]); /* red */
- reg_w1(gspca_dev, 0x07, sn9c1xx[7]); /* green */
- reg_w1(gspca_dev, 0x06, sn9c1xx[6]); /* blue */
+
+ reg_w1(gspca_dev, 0x05, 0x00); /* red */
+ reg_w1(gspca_dev, 0x07, 0x00); /* green */
+ reg_w1(gspca_dev, 0x06, 0x00); /* blue */
reg_w1(gspca_dev, 0x14, sn9c1xx[0x14]);
setgamma(gspca_dev);
+/*fixme: 8 times with all zeroes and 1 or 2 times with normal values */
for (i = 0; i < 8; i++)
reg_w(gspca_dev, 0x84, reg84, sizeof reg84);
switch (sd->sensor) {
- case SENSOR_MT9V111:
- reg_w1(gspca_dev, 0x9a, 0x07);
- reg_w1(gspca_dev, 0x99, 0x59);
- break;
- case SENSOR_OM6802:
- reg_w1(gspca_dev, 0x9a, 0x08);
- reg_w1(gspca_dev, 0x99, 0x10);
- break;
- case SENSOR_OV7648:
- reg_w1(gspca_dev, 0x9a, 0x0a);
- reg_w1(gspca_dev, 0x99, 0x60);
- break;
+ case SENSOR_ADCM1700:
case SENSOR_OV7660:
case SENSOR_SP80708:
reg_w1(gspca_dev, 0x9a, 0x05);
- reg_w1(gspca_dev, 0x99, 0x59);
+ break;
+ case SENSOR_MT9V111:
+ reg_w1(gspca_dev, 0x9a, 0x07);
+ break;
+ case SENSOR_OV7648:
+ reg_w1(gspca_dev, 0x9a, 0x0a);
break;
default:
reg_w1(gspca_dev, 0x9a, 0x08);
- reg_w1(gspca_dev, 0x99, 0x59);
break;
}
+ setsharpness(sd);
reg_w(gspca_dev, 0x84, reg84, sizeof reg84);
- reg_w1(gspca_dev, 0x05, sn9c1xx[5]); /* red */
- reg_w1(gspca_dev, 0x07, sn9c1xx[7]); /* green */
- reg_w1(gspca_dev, 0x06, sn9c1xx[6]); /* blue */
+ reg_w1(gspca_dev, 0x05, 0x20); /* red */
+ reg_w1(gspca_dev, 0x07, 0x20); /* green */
+ reg_w1(gspca_dev, 0x06, 0x20); /* blue */
init = NULL;
mode = gspca_dev->cam.cam_mode[gspca_dev->curr_mode].priv;
@@ -1917,6 +2058,11 @@
reg1 = 0x06; /* 640x480: clk 24Mhz, video trf enable */
reg17 = 0x61; /* 0x:20: enable sensor clock */
switch (sd->sensor) {
+ case SENSOR_ADCM1700:
+ init = adcm1700_sensor_param1;
+ reg1 = 0x46;
+ reg17 = 0xe2;
+ break;
case SENSOR_MO4000:
if (mode) {
/* reg1 = 0x46; * 320 clk 48Mhz 60fp/s */
@@ -1940,7 +2086,6 @@
reg17 = 0x64; /* 640 MCKSIZE */
break;
case SENSOR_OV7630:
- setvflip(sd);
reg17 = 0xe2;
reg1 = 0x44;
break;
@@ -1986,8 +2131,12 @@
}
reg_w(gspca_dev, 0xc0, C0, 6);
- reg_w(gspca_dev, 0xca, CA, 4);
+ if (sd->sensor == SENSOR_ADCM1700)
+ reg_w(gspca_dev, 0xca, CA_adcm1700, 4);
+ else
+ reg_w(gspca_dev, 0xca, CA, 4);
switch (sd->sensor) {
+ case SENSOR_ADCM1700:
case SENSOR_OV7630:
case SENSOR_OV7648:
case SENSOR_OV7660:
@@ -2008,11 +2157,7 @@
reg_w1(gspca_dev, 0x17, reg17);
reg_w1(gspca_dev, 0x01, reg1);
- switch (sd->sensor) {
- case SENSOR_OV7630:
- setvflip(sd);
- break;
- }
+ setvflip(sd);
setbrightness(gspca_dev);
setcontrast(gspca_dev);
setautogain(gspca_dev);
@@ -2056,7 +2201,8 @@
reg_w1(gspca_dev, 0x17, sn9c1xx[0x17]);
reg_w1(gspca_dev, 0x01, sn9c1xx[1]);
reg_w1(gspca_dev, 0x01, data);
- reg_w1(gspca_dev, 0xf1, 0x00);
+ /* Don't disable sensor clock as that disables the button on the cam */
+ /* reg_w1(gspca_dev, 0xf1, 0x01); */
}
static void sd_stop0(struct gspca_dev *gspca_dev)
@@ -2288,6 +2434,24 @@
return 0;
}
+static int sd_setsharpness(struct gspca_dev *gspca_dev, __s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->sharpness = val;
+ if (gspca_dev->streaming)
+ setsharpness(sd);
+ return 0;
+}
+
+static int sd_getsharpness(struct gspca_dev *gspca_dev, __s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ *val = sd->sharpness;
+ return 0;
+}
+
static int sd_setvflip(struct gspca_dev *gspca_dev, __s32 val)
{
struct sd *sd = (struct sd *) gspca_dev;
@@ -2391,6 +2555,25 @@
return -EINVAL;
}
+#ifdef CONFIG_INPUT
+static int sd_int_pkt_scan(struct gspca_dev *gspca_dev,
+ u8 *data, /* interrupt packet data */
+ int len) /* interrupt packet length */
+{
+ int ret = -EINVAL;
+
+ if (len == 1 && data[0] == 1) {
+ input_report_key(gspca_dev->input_dev, KEY_CAMERA, 1);
+ input_sync(gspca_dev->input_dev);
+ input_report_key(gspca_dev->input_dev, KEY_CAMERA, 0);
+ input_sync(gspca_dev->input_dev);
+ ret = 0;
+ }
+
+ return ret;
+}
+#endif
+
/* sub-driver description */
static const struct sd_desc sd_desc = {
.name = MODULE_NAME,
@@ -2406,6 +2589,9 @@
.get_jcomp = sd_get_jcomp,
.set_jcomp = sd_set_jcomp,
.querymenu = sd_querymenu,
+#ifdef CONFIG_INPUT
+ .int_pkt_scan = sd_int_pkt_scan,
+#endif
};
/* -- module initialisation -- */
@@ -2472,6 +2658,7 @@
/* {USB_DEVICE(0x0c45, 0x6142), BS(SN9C120, PO2030N)}, *sn9c120b*/
{USB_DEVICE(0x0c45, 0x6143), BS(SN9C120, SP80708)}, /*sn9c120b*/
{USB_DEVICE(0x0c45, 0x6148), BS(SN9C120, OM6802)}, /*sn9c120b*/
+ {USB_DEVICE(0x0c45, 0x614a), BS(SN9C120, ADCM1700)}, /*sn9c120b*/
{}
};
MODULE_DEVICE_TABLE(usb, device_table);
diff --git a/drivers/media/video/gspca/spca500.c b/drivers/media/video/gspca/spca500.c
index fe46868..b866c73 100644
--- a/drivers/media/video/gspca/spca500.c
+++ b/drivers/media/video/gspca/spca500.c
@@ -68,7 +68,7 @@
static int sd_setcolors(struct gspca_dev *gspca_dev, __s32 val);
static int sd_getcolors(struct gspca_dev *gspca_dev, __s32 *val);
-static struct ctrl sd_ctrls[] = {
+static const struct ctrl sd_ctrls[] = {
{
{
.id = V4L2_CID_BRIGHTNESS,
@@ -1047,7 +1047,7 @@
}
/* sub-driver description */
-static struct sd_desc sd_desc = {
+static const struct sd_desc sd_desc = {
.name = MODULE_NAME,
.ctrls = sd_ctrls,
.nctrls = ARRAY_SIZE(sd_ctrls),
diff --git a/drivers/media/video/gspca/spca501.c b/drivers/media/video/gspca/spca501.c
index 6761a30..c993339 100644
--- a/drivers/media/video/gspca/spca501.c
+++ b/drivers/media/video/gspca/spca501.c
@@ -59,7 +59,7 @@
static int sd_setred_balance(struct gspca_dev *gspca_dev, __s32 val);
static int sd_getred_balance(struct gspca_dev *gspca_dev, __s32 *val);
-static struct ctrl sd_ctrls[] = {
+static const struct ctrl sd_ctrls[] = {
#define MY_BRIGHTNESS 0
{
{
diff --git a/drivers/media/video/gspca/spca505.c b/drivers/media/video/gspca/spca505.c
index 0f9232f..c576eed 100644
--- a/drivers/media/video/gspca/spca505.c
+++ b/drivers/media/video/gspca/spca505.c
@@ -42,7 +42,7 @@
static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val);
static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val);
-static struct ctrl sd_ctrls[] = {
+static const struct ctrl sd_ctrls[] = {
{
{
.id = V4L2_CID_BRIGHTNESS,
diff --git a/drivers/media/video/gspca/spca506.c b/drivers/media/video/gspca/spca506.c
index 39257e4..89fec4c 100644
--- a/drivers/media/video/gspca/spca506.c
+++ b/drivers/media/video/gspca/spca506.c
@@ -51,7 +51,7 @@
static int sd_sethue(struct gspca_dev *gspca_dev, __s32 val);
static int sd_gethue(struct gspca_dev *gspca_dev, __s32 *val);
-static struct ctrl sd_ctrls[] = {
+static const struct ctrl sd_ctrls[] = {
#define SD_BRIGHTNESS 0
{
{
@@ -673,7 +673,7 @@
}
/* sub-driver description */
-static struct sd_desc sd_desc = {
+static const struct sd_desc sd_desc = {
.name = MODULE_NAME,
.ctrls = sd_ctrls,
.nctrls = ARRAY_SIZE(sd_ctrls),
diff --git a/drivers/media/video/gspca/spca508.c b/drivers/media/video/gspca/spca508.c
index 4d8e6cf..15b2eef 100644
--- a/drivers/media/video/gspca/spca508.c
+++ b/drivers/media/video/gspca/spca508.c
@@ -45,7 +45,7 @@
static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val);
static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val);
-static struct ctrl sd_ctrls[] = {
+static const struct ctrl sd_ctrls[] = {
{
{
.id = V4L2_CID_BRIGHTNESS,
diff --git a/drivers/media/video/gspca/spca561.c b/drivers/media/video/gspca/spca561.c
index 58c2f00..dc7f2b0 100644
--- a/drivers/media/video/gspca/spca561.c
+++ b/drivers/media/video/gspca/spca561.c
@@ -922,7 +922,7 @@
}
/* control tables */
-static struct ctrl sd_ctrls_12a[] = {
+static const struct ctrl sd_ctrls_12a[] = {
{
{
.id = V4L2_CID_HUE,
@@ -964,7 +964,7 @@
},
};
-static struct ctrl sd_ctrls_72a[] = {
+static const struct ctrl sd_ctrls_72a[] = {
{
{
.id = V4L2_CID_HUE,
diff --git a/drivers/media/video/gspca/sq905c.c b/drivers/media/video/gspca/sq905c.c
index d70b156..e646620 100644
--- a/drivers/media/video/gspca/sq905c.c
+++ b/drivers/media/video/gspca/sq905c.c
@@ -47,6 +47,7 @@
/* Commands. These go in the "value" slot. */
#define SQ905C_CLEAR 0xa0 /* clear everything */
+#define SQ905C_GET_ID 0x14f4 /* Read version number */
#define SQ905C_CAPTURE_LOW 0xa040 /* Starts capture at 160x120 */
#define SQ905C_CAPTURE_MED 0x1440 /* Starts capture at 320x240 */
#define SQ905C_CAPTURE_HI 0x2840 /* Starts capture at 320x240 */
@@ -101,6 +102,26 @@
return 0;
}
+static int sq905c_read(struct gspca_dev *gspca_dev, u16 command, u16 index,
+ int size)
+{
+ int ret;
+
+ ret = usb_control_msg(gspca_dev->dev,
+ usb_rcvctrlpipe(gspca_dev->dev, 0),
+ USB_REQ_SYNCH_FRAME, /* request */
+ USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ command, index, gspca_dev->usb_buf, size,
+ SQ905C_CMD_TIMEOUT);
+ if (ret < 0) {
+ PDEBUG(D_ERR, "%s: usb_control_msg failed (%d)",
+ __func__, ret);
+ return ret;
+ }
+
+ return 0;
+}
+
/* This function is called as a workqueue function and runs whenever the camera
* is streaming data. Because it is a workqueue function it is allowed to sleep
* so we can use synchronous USB calls. To avoid possible collisions with other
@@ -183,13 +204,34 @@
{
struct cam *cam = &gspca_dev->cam;
struct sd *dev = (struct sd *) gspca_dev;
+ int ret;
PDEBUG(D_PROBE,
"SQ9050 camera detected"
" (vid/pid 0x%04X:0x%04X)", id->idVendor, id->idProduct);
+
+ ret = sq905c_command(gspca_dev, SQ905C_GET_ID, 0);
+ if (ret < 0) {
+ PDEBUG(D_ERR, "Get version command failed");
+ return ret;
+ }
+
+ ret = sq905c_read(gspca_dev, 0xf5, 0, 20);
+ if (ret < 0) {
+ PDEBUG(D_ERR, "Reading version command failed");
+ return ret;
+ }
+ /* Note we leave out the usb id and the manufacturing date */
+ PDEBUG(D_PROBE,
+ "SQ9050 ID string: %02x - %02x %02x %02x %02x %02x %02x",
+ gspca_dev->usb_buf[3],
+ gspca_dev->usb_buf[14], gspca_dev->usb_buf[15],
+ gspca_dev->usb_buf[16], gspca_dev->usb_buf[17],
+ gspca_dev->usb_buf[18], gspca_dev->usb_buf[19]);
+
cam->cam_mode = sq905c_mode;
cam->nmodes = 2;
- if (id->idProduct == 0x9050)
+ if (gspca_dev->usb_buf[15] == 0)
cam->nmodes = 1;
/* We don't use the buffer gspca allocates so make it small. */
cam->bulk_size = 32;
@@ -258,6 +300,7 @@
static const __devinitdata struct usb_device_id device_table[] = {
{USB_DEVICE(0x2770, 0x905c)},
{USB_DEVICE(0x2770, 0x9050)},
+ {USB_DEVICE(0x2770, 0x9052)},
{USB_DEVICE(0x2770, 0x913d)},
{}
};
diff --git a/drivers/media/video/gspca/stk014.c b/drivers/media/video/gspca/stk014.c
index 2e29355..0fb5342 100644
--- a/drivers/media/video/gspca/stk014.c
+++ b/drivers/media/video/gspca/stk014.c
@@ -53,7 +53,7 @@
static int sd_setfreq(struct gspca_dev *gspca_dev, __s32 val);
static int sd_getfreq(struct gspca_dev *gspca_dev, __s32 *val);
-static struct ctrl sd_ctrls[] = {
+static const struct ctrl sd_ctrls[] = {
{
{
.id = V4L2_CID_BRIGHTNESS,
diff --git a/drivers/media/video/gspca/stv0680.c b/drivers/media/video/gspca/stv0680.c
index 2a69d7c..e50dd76 100644
--- a/drivers/media/video/gspca/stv0680.c
+++ b/drivers/media/video/gspca/stv0680.c
@@ -45,7 +45,7 @@
};
/* V4L2 controls supported by the driver */
-static struct ctrl sd_ctrls[] = {
+static const struct ctrl sd_ctrls[] = {
};
static int stv_sndctrl(struct gspca_dev *gspca_dev, int set, u8 req, u16 val,
@@ -53,24 +53,28 @@
{
int ret = -1;
u8 req_type = 0;
+ unsigned int pipe = 0;
switch (set) {
case 0: /* 0xc1 */
req_type = USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT;
+ pipe = usb_rcvctrlpipe(gspca_dev->dev, 0);
break;
case 1: /* 0x41 */
req_type = USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT;
+ pipe = usb_sndctrlpipe(gspca_dev->dev, 0);
break;
case 2: /* 0x80 */
req_type = USB_DIR_IN | USB_RECIP_DEVICE;
+ pipe = usb_rcvctrlpipe(gspca_dev->dev, 0);
break;
case 3: /* 0x40 */
req_type = USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE;
+ pipe = usb_sndctrlpipe(gspca_dev->dev, 0);
break;
}
- ret = usb_control_msg(gspca_dev->dev,
- usb_rcvctrlpipe(gspca_dev->dev, 0),
+ ret = usb_control_msg(gspca_dev->dev, pipe,
req, req_type,
val, 0, gspca_dev->usb_buf, size, 500);
@@ -138,6 +142,10 @@
struct sd *sd = (struct sd *) gspca_dev;
struct cam *cam = &gspca_dev->cam;
+ /* Give the camera some time to settle, otherwise initalization will
+ fail on hotplug, and yes it really needs a full second. */
+ msleep(1000);
+
/* ping camera to be sure STV0680 is present */
if (stv_sndctrl(gspca_dev, 0, 0x88, 0x5678, 0x02) != 0x02 ||
gspca_dev->usb_buf[0] != 0x56 || gspca_dev->usb_buf[1] != 0x78) {
@@ -169,6 +177,8 @@
PDEBUG(D_PROBE, "Camera supports CIF mode");
if (gspca_dev->usb_buf[7] & 0x02)
PDEBUG(D_PROBE, "Camera supports VGA mode");
+ if (gspca_dev->usb_buf[7] & 0x04)
+ PDEBUG(D_PROBE, "Camera supports QCIF mode");
if (gspca_dev->usb_buf[7] & 0x08)
PDEBUG(D_PROBE, "Camera supports QVGA mode");
diff --git a/drivers/media/video/gspca/stv06xx/stv06xx.c b/drivers/media/video/gspca/stv06xx/stv06xx.c
index 5d0241b..af73da3 100644
--- a/drivers/media/video/gspca/stv06xx/stv06xx.c
+++ b/drivers/media/video/gspca/stv06xx/stv06xx.c
@@ -27,6 +27,7 @@
* P/N 861040-0000: Sensor ST VV6410 ASIC STV0610 - QuickCam Web
*/
+#include <linux/input.h>
#include "stv06xx_sensor.h"
MODULE_AUTHOR("Erik Andrén");
@@ -219,6 +220,7 @@
info("Read 0x%x from address 0x%x", data, i);
}
+ info("Testing stv06xx bridge registers for writability");
for (i = 0x1400; i < 0x160f; i++) {
stv06xx_read_bridge(sd, i, &data);
buf = data;
@@ -229,7 +231,7 @@
info("Register 0x%x is read/write", i);
else if (data != buf)
info("Register 0x%x is read/write,"
- "but only partially", i);
+ " but only partially", i);
else
info("Register 0x%x is read-only", i);
@@ -426,6 +428,29 @@
}
}
+#ifdef CONFIG_INPUT
+static int sd_int_pkt_scan(struct gspca_dev *gspca_dev,
+ u8 *data, /* interrupt packet data */
+ int len) /* interrupt packet length */
+{
+ int ret = -EINVAL;
+
+ if (len == 1 && data[0] == 0x80) {
+ input_report_key(gspca_dev->input_dev, KEY_CAMERA, 1);
+ input_sync(gspca_dev->input_dev);
+ ret = 0;
+ }
+
+ if (len == 1 && data[0] == 0x88) {
+ input_report_key(gspca_dev->input_dev, KEY_CAMERA, 0);
+ input_sync(gspca_dev->input_dev);
+ ret = 0;
+ }
+
+ return ret;
+}
+#endif
+
static int stv06xx_config(struct gspca_dev *gspca_dev,
const struct usb_device_id *id);
@@ -436,7 +461,10 @@
.init = stv06xx_init,
.start = stv06xx_start,
.stopN = stv06xx_stopN,
- .pkt_scan = stv06xx_pkt_scan
+ .pkt_scan = stv06xx_pkt_scan,
+#ifdef CONFIG_INPUT
+ .int_pkt_scan = sd_int_pkt_scan,
+#endif
};
/* This function is called at probe time */
diff --git a/drivers/media/video/gspca/sunplus.c b/drivers/media/video/gspca/sunplus.c
index 306b7d7..0c786e0 100644
--- a/drivers/media/video/gspca/sunplus.c
+++ b/drivers/media/video/gspca/sunplus.c
@@ -67,7 +67,7 @@
static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val);
static int sd_getautogain(struct gspca_dev *gspca_dev, __s32 *val);
-static struct ctrl sd_ctrls[] = {
+static const struct ctrl sd_ctrls[] = {
{
{
.id = V4L2_CID_BRIGHTNESS,
@@ -267,142 +267,6 @@
{0x06, 0x0000, 0x0000},
{0x00, 0x0004, 0x2880},
{0x00, 0x0001, 0x2881},
-/* look like setting a qTable */
- {0x00, 0x0006, 0x2800},
- {0x00, 0x0004, 0x2801},
- {0x00, 0x0004, 0x2802},
- {0x00, 0x0006, 0x2803},
- {0x00, 0x000a, 0x2804},
- {0x00, 0x0010, 0x2805},
- {0x00, 0x0014, 0x2806},
- {0x00, 0x0018, 0x2807},
- {0x00, 0x0005, 0x2808},
- {0x00, 0x0005, 0x2809},
- {0x00, 0x0006, 0x280a},
- {0x00, 0x0008, 0x280b},
- {0x00, 0x000a, 0x280c},
- {0x00, 0x0017, 0x280d},
- {0x00, 0x0018, 0x280e},
- {0x00, 0x0016, 0x280f},
-
- {0x00, 0x0006, 0x2810},
- {0x00, 0x0005, 0x2811},
- {0x00, 0x0006, 0x2812},
- {0x00, 0x000a, 0x2813},
- {0x00, 0x0010, 0x2814},
- {0x00, 0x0017, 0x2815},
- {0x00, 0x001c, 0x2816},
- {0x00, 0x0016, 0x2817},
- {0x00, 0x0006, 0x2818},
- {0x00, 0x0007, 0x2819},
- {0x00, 0x0009, 0x281a},
- {0x00, 0x000c, 0x281b},
- {0x00, 0x0014, 0x281c},
- {0x00, 0x0023, 0x281d},
- {0x00, 0x0020, 0x281e},
- {0x00, 0x0019, 0x281f},
-
- {0x00, 0x0007, 0x2820},
- {0x00, 0x0009, 0x2821},
- {0x00, 0x000f, 0x2822},
- {0x00, 0x0016, 0x2823},
- {0x00, 0x001b, 0x2824},
- {0x00, 0x002c, 0x2825},
- {0x00, 0x0029, 0x2826},
- {0x00, 0x001f, 0x2827},
- {0x00, 0x000a, 0x2828},
- {0x00, 0x000e, 0x2829},
- {0x00, 0x0016, 0x282a},
- {0x00, 0x001a, 0x282b},
- {0x00, 0x0020, 0x282c},
- {0x00, 0x002a, 0x282d},
- {0x00, 0x002d, 0x282e},
- {0x00, 0x0025, 0x282f},
-
- {0x00, 0x0014, 0x2830},
- {0x00, 0x001a, 0x2831},
- {0x00, 0x001f, 0x2832},
- {0x00, 0x0023, 0x2833},
- {0x00, 0x0029, 0x2834},
- {0x00, 0x0030, 0x2835},
- {0x00, 0x0030, 0x2836},
- {0x00, 0x0028, 0x2837},
- {0x00, 0x001d, 0x2838},
- {0x00, 0x0025, 0x2839},
- {0x00, 0x0026, 0x283a},
- {0x00, 0x0027, 0x283b},
- {0x00, 0x002d, 0x283c},
- {0x00, 0x0028, 0x283d},
- {0x00, 0x0029, 0x283e},
- {0x00, 0x0028, 0x283f},
-
- {0x00, 0x0007, 0x2840},
- {0x00, 0x0007, 0x2841},
- {0x00, 0x000a, 0x2842},
- {0x00, 0x0013, 0x2843},
- {0x00, 0x0028, 0x2844},
- {0x00, 0x0028, 0x2845},
- {0x00, 0x0028, 0x2846},
- {0x00, 0x0028, 0x2847},
- {0x00, 0x0007, 0x2848},
- {0x00, 0x0008, 0x2849},
- {0x00, 0x000a, 0x284a},
- {0x00, 0x001a, 0x284b},
- {0x00, 0x0028, 0x284c},
- {0x00, 0x0028, 0x284d},
- {0x00, 0x0028, 0x284e},
- {0x00, 0x0028, 0x284f},
-
- {0x00, 0x000a, 0x2850},
- {0x00, 0x000a, 0x2851},
- {0x00, 0x0016, 0x2852},
- {0x00, 0x0028, 0x2853},
- {0x00, 0x0028, 0x2854},
- {0x00, 0x0028, 0x2855},
- {0x00, 0x0028, 0x2856},
- {0x00, 0x0028, 0x2857},
- {0x00, 0x0013, 0x2858},
- {0x00, 0x001a, 0x2859},
- {0x00, 0x0028, 0x285a},
- {0x00, 0x0028, 0x285b},
- {0x00, 0x0028, 0x285c},
- {0x00, 0x0028, 0x285d},
- {0x00, 0x0028, 0x285e},
- {0x00, 0x0028, 0x285f},
-
- {0x00, 0x0028, 0x2860},
- {0x00, 0x0028, 0x2861},
- {0x00, 0x0028, 0x2862},
- {0x00, 0x0028, 0x2863},
- {0x00, 0x0028, 0x2864},
- {0x00, 0x0028, 0x2865},
- {0x00, 0x0028, 0x2866},
- {0x00, 0x0028, 0x2867},
- {0x00, 0x0028, 0x2868},
- {0x00, 0x0028, 0x2869},
- {0x00, 0x0028, 0x286a},
- {0x00, 0x0028, 0x286b},
- {0x00, 0x0028, 0x286c},
- {0x00, 0x0028, 0x286d},
- {0x00, 0x0028, 0x286e},
- {0x00, 0x0028, 0x286f},
-
- {0x00, 0x0028, 0x2870},
- {0x00, 0x0028, 0x2871},
- {0x00, 0x0028, 0x2872},
- {0x00, 0x0028, 0x2873},
- {0x00, 0x0028, 0x2874},
- {0x00, 0x0028, 0x2875},
- {0x00, 0x0028, 0x2876},
- {0x00, 0x0028, 0x2877},
- {0x00, 0x0028, 0x2878},
- {0x00, 0x0028, 0x2879},
- {0x00, 0x0028, 0x287a},
- {0x00, 0x0028, 0x287b},
- {0x00, 0x0028, 0x287c},
- {0x00, 0x0028, 0x287d},
- {0x00, 0x0028, 0x287e},
- {0x00, 0x0028, 0x287f},
{0xa0, 0x0000, 0x0503},
};
@@ -622,6 +486,20 @@
PDEBUG(D_FRAM, "after wait 0x%04x", notdone);
}
+static void spca504_read_info(struct gspca_dev *gspca_dev)
+{
+ int i;
+ u8 info[6];
+
+ for (i = 0; i < 6; i++)
+ info[i] = reg_r_1(gspca_dev, i);
+ PDEBUG(D_STREAM,
+ "Read info: %d %d %d %d %d %d."
+ " Should be 1,0,2,2,0,0",
+ info[0], info[1], info[2],
+ info[3], info[4], info[5]);
+}
+
static void spca504A_acknowledged_command(struct gspca_dev *gspca_dev,
u8 req,
u16 idx, u16 val, u16 endcode, u8 count)
@@ -881,8 +759,6 @@
static int sd_init(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
- int i;
- u8 info[6];
switch (sd->bridge) {
case BRIDGE_SPCA504B:
@@ -924,15 +800,8 @@
/* case BRIDGE_SPCA504: */
PDEBUG(D_STREAM, "Opening SPCA504");
if (sd->subtype == AiptekMiniPenCam13) {
- /*****************************/
- for (i = 0; i < 6; i++)
- info[i] = reg_r_1(gspca_dev, i);
- PDEBUG(D_STREAM,
- "Read info: %d %d %d %d %d %d."
- " Should be 1,0,2,2,0,0",
- info[0], info[1], info[2],
- info[3], info[4], info[5]);
- /* spca504a aiptek */
+ spca504_read_info(gspca_dev);
+
/* Set AE AWB Banding Type 3-> 50Hz 2-> 60Hz */
spca504A_acknowledged_command(gspca_dev, 0x24,
8, 3, 0x9e, 1);
@@ -971,8 +840,6 @@
{
struct sd *sd = (struct sd *) gspca_dev;
int enable;
- int i;
- u8 info[6];
/* create the JPEG header */
sd->jpeg_hdr = kmalloc(JPEG_HDR_SZ, GFP_KERNEL);
@@ -1008,14 +875,8 @@
break;
case BRIDGE_SPCA504:
if (sd->subtype == AiptekMiniPenCam13) {
- for (i = 0; i < 6; i++)
- info[i] = reg_r_1(gspca_dev, i);
- PDEBUG(D_STREAM,
- "Read info: %d %d %d %d %d %d."
- " Should be 1,0,2,2,0,0",
- info[0], info[1], info[2],
- info[3], info[4], info[5]);
- /* spca504a aiptek */
+ spca504_read_info(gspca_dev);
+
/* Set AE AWB Banding Type 3-> 50Hz 2-> 60Hz */
spca504A_acknowledged_command(gspca_dev, 0x24,
8, 3, 0x9e, 1);
@@ -1026,13 +887,7 @@
0, 0, 0x9d, 1);
} else {
spca504_acknowledged_command(gspca_dev, 0x24, 8, 3);
- for (i = 0; i < 6; i++)
- info[i] = reg_r_1(gspca_dev, i);
- PDEBUG(D_STREAM,
- "Read info: %d %d %d %d %d %d."
- " Should be 1,0,2,2,0,0",
- info[0], info[1], info[2],
- info[3], info[4], info[5]);
+ spca504_read_info(gspca_dev);
spca504_acknowledged_command(gspca_dev, 0x24, 8, 3);
spca504_acknowledged_command(gspca_dev, 0x24, 0, 0);
}
@@ -1336,6 +1191,7 @@
{USB_DEVICE(0x04fc, 0x5330), BS(SPCA533, 0)},
{USB_DEVICE(0x04fc, 0x5360), BS(SPCA536, 0)},
{USB_DEVICE(0x04fc, 0xffff), BS(SPCA504B, 0)},
+ {USB_DEVICE(0x052b, 0x1507), BS(SPCA533, MegapixV4)},
{USB_DEVICE(0x052b, 0x1513), BS(SPCA533, MegapixV4)},
{USB_DEVICE(0x052b, 0x1803), BS(SPCA533, MegaImageVI)},
{USB_DEVICE(0x0546, 0x3155), BS(SPCA533, 0)},
diff --git a/drivers/media/video/gspca/t613.c b/drivers/media/video/gspca/t613.c
index 55ef6a74..668a753 100644
--- a/drivers/media/video/gspca/t613.c
+++ b/drivers/media/video/gspca/t613.c
@@ -52,6 +52,7 @@
#define SENSOR_OM6802 0
#define SENSOR_OTHER 1
#define SENSOR_TAS5130A 2
+#define SENSOR_LT168G 3 /* must verify if this is the actual model */
};
/* V4L2 controls supported by the driver */
@@ -78,7 +79,7 @@
static int sd_querymenu(struct gspca_dev *gspca_dev,
struct v4l2_querymenu *menu);
-static struct ctrl sd_ctrls[] = {
+static const struct ctrl sd_ctrls[] = {
{
{
.id = V4L2_CID_BRIGHTNESS,
@@ -306,6 +307,17 @@
0xbe, 0x36, 0xbf, 0xff, 0xc2, 0x88, 0xc5, 0xc8,
0xc6, 0xda
};
+static const u8 n4_lt168g[] = {
+ 0x66, 0x01, 0x7f, 0x00, 0x80, 0x7c, 0x81, 0x28,
+ 0x83, 0x44, 0x84, 0x20, 0x86, 0x20, 0x8a, 0x70,
+ 0x8b, 0x58, 0x8c, 0x88, 0x8d, 0xa0, 0x8e, 0xb3,
+ 0x8f, 0x24, 0xa1, 0xb0, 0xa2, 0x38, 0xa5, 0x20,
+ 0xa6, 0x4a, 0xa8, 0xe8, 0xaf, 0x38, 0xb0, 0x68,
+ 0xb1, 0x44, 0xb2, 0x88, 0xbb, 0x86, 0xbd, 0x40,
+ 0xbe, 0x26, 0xc1, 0x05, 0xc2, 0x88, 0xc5, 0xc0,
+ 0xda, 0x8e, 0xdb, 0xca, 0xdc, 0xa8, 0xdd, 0x8c,
+ 0xde, 0x44, 0xdf, 0x0c, 0xe9, 0x80
+};
static const struct additional_sensor_data sensor_data[] = {
{ /* 0: OM6802 */
@@ -380,6 +392,23 @@
.stream =
{0x0b, 0x04, 0x0a, 0x40},
},
+ { /* 3: LT168G */
+ .n3 = {0x61, 0xc2, 0x65, 0x68, 0x60, 0x00},
+ .n4 = n4_lt168g,
+ .n4sz = sizeof n4_lt168g,
+ .reg80 = 0x7c,
+ .reg8e = 0xb3,
+ .nset8 = {0xa8, 0xf0, 0xc6, 0xba, 0xc0, 0x00},
+ .data1 = {0xc0, 0x38, 0x08, 0x10, 0xc0, 0x30, 0x10, 0x40,
+ 0xb0, 0xf4},
+ .data2 = {0x40, 0x80, 0xc0, 0x50, 0xa0, 0xf0, 0x53, 0xa6,
+ 0xff},
+ .data3 = {0x40, 0x80, 0xc0, 0x50, 0xa0, 0xf0, 0x53, 0xa6,
+ 0xff},
+ .data4 = {0x66, 0x41, 0xa8, 0xf0},
+ .data5 = {0x0c, 0x03, 0xab, 0x4b, 0x81, 0x2b},
+ .stream = {0x0b, 0x04, 0x0a, 0x28},
+ },
};
#define MAX_EFFECTS 7
@@ -716,6 +745,10 @@
PDEBUG(D_PROBE, "sensor tas5130a");
sd->sensor = SENSOR_TAS5130A;
break;
+ case 0x0802:
+ PDEBUG(D_PROBE, "sensor lt168g");
+ sd->sensor = SENSOR_LT168G;
+ break;
case 0x0803:
PDEBUG(D_PROBE, "sensor 'other'");
sd->sensor = SENSOR_OTHER;
@@ -758,6 +791,13 @@
reg_w_buf(gspca_dev, sensor->n3, sizeof sensor->n3);
reg_w_buf(gspca_dev, sensor->n4, sensor->n4sz);
+ if (sd->sensor == SENSOR_LT168G) {
+ test_byte = reg_r(gspca_dev, 0x80);
+ PDEBUG(D_STREAM, "Reg 0x%02x = 0x%02x", 0x80,
+ test_byte);
+ reg_w(gspca_dev, 0x6c80);
+ }
+
reg_w_ixbuf(gspca_dev, 0xd0, sensor->data1, sizeof sensor->data1);
reg_w_ixbuf(gspca_dev, 0xc7, sensor->data2, sizeof sensor->data2);
reg_w_ixbuf(gspca_dev, 0xe0, sensor->data3, sizeof sensor->data3);
@@ -782,6 +822,13 @@
reg_w_buf(gspca_dev, sensor->nset8, sizeof sensor->nset8);
reg_w_buf(gspca_dev, sensor->stream, sizeof sensor->stream);
+ if (sd->sensor == SENSOR_LT168G) {
+ test_byte = reg_r(gspca_dev, 0x80);
+ PDEBUG(D_STREAM, "Reg 0x%02x = 0x%02x", 0x80,
+ test_byte);
+ reg_w(gspca_dev, 0x6c80);
+ }
+
reg_w_ixbuf(gspca_dev, 0xd0, sensor->data1, sizeof sensor->data1);
reg_w_ixbuf(gspca_dev, 0xc7, sensor->data2, sizeof sensor->data2);
reg_w_ixbuf(gspca_dev, 0xe0, sensor->data3, sizeof sensor->data3);
@@ -888,6 +935,8 @@
case SENSOR_OM6802:
om6802_sensor_init(gspca_dev);
break;
+ case SENSOR_LT168G:
+ break;
case SENSOR_OTHER:
break;
default:
diff --git a/drivers/media/video/gspca/tv8532.c b/drivers/media/video/gspca/tv8532.c
index b74a3b6..c7b6eb1 100644
--- a/drivers/media/video/gspca/tv8532.c
+++ b/drivers/media/video/gspca/tv8532.c
@@ -39,7 +39,7 @@
static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val);
static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val);
-static struct ctrl sd_ctrls[] = {
+static const struct ctrl sd_ctrls[] = {
{
{
.id = V4L2_CID_BRIGHTNESS,
diff --git a/drivers/media/video/gspca/vc032x.c b/drivers/media/video/gspca/vc032x.c
index 71921c8..4989f9a 100644
--- a/drivers/media/video/gspca/vc032x.c
+++ b/drivers/media/video/gspca/vc032x.c
@@ -32,10 +32,13 @@
struct sd {
struct gspca_dev gspca_dev; /* !! must be the first item */
+ u8 brightness;
+ u8 contrast;
+ u8 colors;
u8 hflip;
u8 vflip;
u8 lightfreq;
- u8 sharpness;
+ s8 sharpness;
u8 image_offset;
@@ -52,6 +55,7 @@
#define SENSOR_OV7670 6
#define SENSOR_PO1200 7
#define SENSOR_PO3130NC 8
+#define SENSOR_POxxxx 9
u8 flags;
#define FL_SAMSUNG 0x01 /* SamsungQ1 (2 sensors) */
#define FL_HFLIP 0x02 /* mirrored by default */
@@ -59,6 +63,12 @@
};
/* V4L2 controls supported by the driver */
+static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_setcontrast(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getcontrast(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_setcolors(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getcolors(struct gspca_dev *gspca_dev, __s32 *val);
static int sd_sethflip(struct gspca_dev *gspca_dev, __s32 val);
static int sd_gethflip(struct gspca_dev *gspca_dev, __s32 *val);
static int sd_setvflip(struct gspca_dev *gspca_dev, __s32 val);
@@ -68,9 +78,54 @@
static int sd_setsharpness(struct gspca_dev *gspca_dev, __s32 val);
static int sd_getsharpness(struct gspca_dev *gspca_dev, __s32 *val);
-static struct ctrl sd_ctrls[] = {
+static const struct ctrl sd_ctrls[] = {
+#define BRIGHTNESS_IDX 0
+ {
+ {
+ .id = V4L2_CID_BRIGHTNESS,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Brightness",
+ .minimum = 0,
+ .maximum = 255,
+ .step = 1,
+#define BRIGHTNESS_DEF 128
+ .default_value = BRIGHTNESS_DEF,
+ },
+ .set = sd_setbrightness,
+ .get = sd_getbrightness,
+ },
+#define CONTRAST_IDX 1
+ {
+ {
+ .id = V4L2_CID_CONTRAST,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Contrast",
+ .minimum = 0,
+ .maximum = 255,
+ .step = 1,
+#define CONTRAST_DEF 127
+ .default_value = CONTRAST_DEF,
+ },
+ .set = sd_setcontrast,
+ .get = sd_getcontrast,
+ },
+#define COLORS_IDX 2
+ {
+ {
+ .id = V4L2_CID_SATURATION,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Saturation",
+ .minimum = 1,
+ .maximum = 127,
+ .step = 1,
+#define COLOR_DEF 63
+ .default_value = COLOR_DEF,
+ },
+ .set = sd_setcolors,
+ .get = sd_getcolors,
+ },
/* next 2 controls work with some sensors only */
-#define HFLIP_IDX 0
+#define HFLIP_IDX 3
{
{
.id = V4L2_CID_HFLIP,
@@ -85,7 +140,7 @@
.set = sd_sethflip,
.get = sd_gethflip,
},
-#define VFLIP_IDX 1
+#define VFLIP_IDX 4
{
{
.id = V4L2_CID_VFLIP,
@@ -100,7 +155,7 @@
.set = sd_setvflip,
.get = sd_getvflip,
},
-#define LIGHTFREQ_IDX 2
+#define LIGHTFREQ_IDX 5
{
{
.id = V4L2_CID_POWER_LINE_FREQUENCY,
@@ -115,17 +170,16 @@
.set = sd_setfreq,
.get = sd_getfreq,
},
-/* po1200 only */
-#define SHARPNESS_IDX 3
+#define SHARPNESS_IDX 6
{
{
.id = V4L2_CID_SHARPNESS,
.type = V4L2_CTRL_TYPE_INTEGER,
.name = "Sharpness",
- .minimum = 0,
+ .minimum = -1,
.maximum = 2,
.step = 1,
-#define SHARPNESS_DEF 1
+#define SHARPNESS_DEF -1
.default_value = SHARPNESS_DEF,
},
.set = sd_setsharpness,
@@ -133,6 +187,42 @@
},
};
+/* table of the disabled controls */
+static u32 ctrl_dis[] = {
+/* SENSOR_HV7131R 0 */
+ (1 << BRIGHTNESS_IDX) | (1 << CONTRAST_IDX) | (1 << COLORS_IDX)
+ | (1 << HFLIP_IDX) | (1 << VFLIP_IDX) | (1 << LIGHTFREQ_IDX)
+ | (1 << SHARPNESS_IDX),
+/* SENSOR_MI0360 1 */
+ (1 << BRIGHTNESS_IDX) | (1 << CONTRAST_IDX) | (1 << COLORS_IDX)
+ | (1 << HFLIP_IDX) | (1 << VFLIP_IDX) | (1 << LIGHTFREQ_IDX)
+ | (1 << SHARPNESS_IDX),
+/* SENSOR_MI1310_SOC 2 */
+ (1 << BRIGHTNESS_IDX) | (1 << CONTRAST_IDX) | (1 << COLORS_IDX)
+ | (1 << LIGHTFREQ_IDX) | (1 << SHARPNESS_IDX),
+/* SENSOR_MI1320 3 */
+ (1 << BRIGHTNESS_IDX) | (1 << CONTRAST_IDX) | (1 << COLORS_IDX)
+ | (1 << LIGHTFREQ_IDX) | (1 << SHARPNESS_IDX),
+/* SENSOR_MI1320_SOC 4 */
+ (1 << BRIGHTNESS_IDX) | (1 << CONTRAST_IDX) | (1 << COLORS_IDX)
+ | (1 << LIGHTFREQ_IDX) | (1 << SHARPNESS_IDX),
+/* SENSOR_OV7660 5 */
+ (1 << BRIGHTNESS_IDX) | (1 << CONTRAST_IDX) | (1 << COLORS_IDX)
+ | (1 << LIGHTFREQ_IDX) | (1 << SHARPNESS_IDX),
+/* SENSOR_OV7670 6 */
+ (1 << BRIGHTNESS_IDX) | (1 << CONTRAST_IDX) | (1 << COLORS_IDX)
+ | (1 << SHARPNESS_IDX),
+/* SENSOR_PO1200 7 */
+ (1 << BRIGHTNESS_IDX) | (1 << CONTRAST_IDX) | (1 << COLORS_IDX)
+ | (1 << LIGHTFREQ_IDX),
+/* SENSOR_PO3130NC 8 */
+ (1 << BRIGHTNESS_IDX) | (1 << CONTRAST_IDX) | (1 << COLORS_IDX)
+ | (1 << HFLIP_IDX) | (1 << VFLIP_IDX) | (1 << LIGHTFREQ_IDX)
+ | (1 << SHARPNESS_IDX),
+/* SENSOR_POxxxx 9 */
+ (1 << HFLIP_IDX) | (1 << VFLIP_IDX) | (1 << LIGHTFREQ_IDX),
+};
+
static const struct v4l2_pix_format vc0321_mode[] = {
{320, 240, V4L2_PIX_FMT_YVYU, V4L2_FIELD_NONE,
.bytesperline = 320,
@@ -215,7 +305,7 @@
{0xb3, 0x15, 0x00, 0xcc},
{0xb3, 0x16, 0x02, 0xcc},
{0xb3, 0x17, 0x7f, 0xcc},
- {0xb3, 0x35, 0xdd, 0xcc},
+ {0xb3, 0x35, 0xdd, 0xcc}, /* i2c add: 5d */
{0xb3, 0x34, 0x02, 0xcc},
{0xb3, 0x00, 0x25, 0xcc},
{0xbc, 0x00, 0x71, 0xcc},
@@ -435,7 +525,7 @@
{0xb3, 0x08, 0x01, 0xcc},
{0xb3, 0x09, 0x0c, 0xcc},
{0xb3, 0x34, 0x02, 0xcc},
- {0xb3, 0x35, 0xdd, 0xcc},
+ {0xb3, 0x35, 0xdd, 0xcc}, /* i2c add: 5d */
{0xb3, 0x02, 0x00, 0xcc},
{0xb3, 0x03, 0x0a, 0xcc},
{0xb3, 0x04, 0x05, 0xcc},
@@ -860,7 +950,8 @@
{0xb0, 0x16, 0x03, 0xcc}, {0xb3, 0x05, 0x00, 0xcc},
{0xb3, 0x06, 0x00, 0xcc}, {0xb3, 0x08, 0x01, 0xcc},
{0xb3, 0x09, 0x0c, 0xcc}, {0xb3, 0x34, 0x02, 0xcc},
- {0xb3, 0x35, 0xc8, 0xcc}, {0xb3, 0x02, 0x00, 0xcc},
+ {0xb3, 0x35, 0xc8, 0xcc}, /* i2c add: 48 */
+ {0xb3, 0x02, 0x00, 0xcc},
{0xb3, 0x03, 0x0a, 0xcc}, {0xb3, 0x04, 0x05, 0xcc},
{0xb3, 0x20, 0x00, 0xcc}, {0xb3, 0x21, 0x00, 0xcc},
{0xb3, 0x22, 0x03, 0xcc}, {0xb3, 0x23, 0xc0, 0xcc},
@@ -901,7 +992,8 @@
{0xc3, 0x01, 0x03, 0xbb}, {0xc4, 0x00, 0x04, 0xbb},
{0xf0, 0x00, 0x00, 0xbb}, {0x05, 0x01, 0x13, 0xbb},
{0x06, 0x00, 0x11, 0xbb}, {0x07, 0x00, 0x85, 0xbb},
- {0x08, 0x00, 0x27, 0xbb}, {0x20, 0x01, 0x03, 0xbb},
+ {0x08, 0x00, 0x27, 0xbb},
+ {0x20, 0x01, 0x00, 0xbb}, /* h/v flips - was 03 */
{0x21, 0x80, 0x00, 0xbb}, {0x22, 0x0d, 0x0f, 0xbb},
{0x24, 0x80, 0x00, 0xbb}, {0x59, 0x00, 0xff, 0xbb},
{0xf0, 0x00, 0x02, 0xbb}, {0x39, 0x03, 0x0d, 0xbb},
@@ -1012,7 +1104,7 @@
{0xb3, 0x08, 0x01, 0xcc},
{0xb3, 0x09, 0x0c, 0xcc},
{0xb3, 0x34, 0x02, 0xcc},
- {0xb3, 0x35, 0xc8, 0xcc},
+ {0xb3, 0x35, 0xc8, 0xcc}, /* i2c add: 48 */
{0xb3, 0x02, 0x00, 0xcc},
{0xb3, 0x03, 0x0a, 0xcc},
{0xb3, 0x04, 0x05, 0xcc},
@@ -1359,7 +1451,8 @@
{0xb3, 0x23, 0xe8, 0xcc}, {0xb8, 0x08, 0xe8, 0xcc},
{0xb3, 0x14, 0x00, 0xcc}, {0xb3, 0x15, 0x00, 0xcc},
{0xb3, 0x16, 0x02, 0xcc}, {0xb3, 0x17, 0x7f, 0xcc},
- {0xb3, 0x34, 0x01, 0xcc}, {0xb3, 0x35, 0xf6, 0xcc},
+ {0xb3, 0x34, 0x01, 0xcc},
+ {0xb3, 0x35, 0xf6, 0xcc}, /* i2c add: 76 */
{0xb3, 0x00, 0x27, 0xcc}, {0xbc, 0x00, 0x71, 0xcc},
{0xb8, 0x00, 0x21, 0xcc}, {0xb8, 0x27, 0x20, 0xcc},
{0xb8, 0x01, 0x79, 0xcc}, {0xb8, 0x81, 0x09, 0xcc},
@@ -1561,7 +1654,7 @@
{0xb3, 0x16, 0x02, 0xcc},
{0xb3, 0x17, 0x7f, 0xcc},
{0xb3, 0x34, 0x01, 0xcc},
- {0xb3, 0x35, 0x91, 0xcc},
+ {0xb3, 0x35, 0x91, 0xcc}, /* i2c add: 11 */
{0xb3, 0x00, 0x27, 0xcc},
{0xbc, 0x00, 0x73, 0xcc},
{0xb8, 0x00, 0x23, 0xcc},
@@ -1747,7 +1840,8 @@
{0xb3, 0x23, 0xe0, 0xcc}, {0xb3, 0x1d, 0x01, 0xcc},
{0xb3, 0x1f, 0x02, 0xcc},
{0xb3, 0x34, 0x01, 0xcc},
- {0xb3, 0x35, 0xa1, 0xcc}, {0xb3, 0x00, 0x26, 0xcc},
+ {0xb3, 0x35, 0xa1, 0xcc}, /* i2c add: 21 */
+ {0xb3, 0x00, 0x26, 0xcc},
{0xb8, 0x00, 0x33, 0xcc}, /* 13 */
{0xb8, 0x01, 0x7d, 0xcc},
{0xbc, 0x00, 0x73, 0xcc}, {0xb8, 0x81, 0x09, 0xcc},
@@ -1883,7 +1977,8 @@
{0x00, 0x00, 0x10, 0xdd},
{0xb0, 0x04, 0x02, 0xcc}, {0x00, 0x00, 0x10, 0xdd},
{0xb3, 0x00, 0x66, 0xcc}, {0xb3, 0x00, 0x67, 0xcc},
- {0xb3, 0x35, 0xa1, 0xcc}, {0xb3, 0x34, 0x01, 0xcc},
+ {0xb3, 0x35, 0xa1, 0xcc}, /* i2c add: 21 */
+ {0xb3, 0x34, 0x01, 0xcc},
{0xb3, 0x05, 0x01, 0xcc}, {0xb3, 0x06, 0x01, 0xcc},
{0xb3, 0x08, 0x01, 0xcc}, {0xb3, 0x09, 0x0c, 0xcc},
{0xb3, 0x02, 0x02, 0xcc}, {0xb3, 0x03, 0x1f, 0xcc},
@@ -2181,7 +2276,7 @@
{0xb0, 0x54, 0x13, 0xcc},
{0xb3, 0x00, 0x67, 0xcc},
{0xb3, 0x34, 0x01, 0xcc},
- {0xb3, 0x35, 0xdc, 0xcc},
+ {0xb3, 0x35, 0xdc, 0xcc}, /* i2c add: 5c */
{0x00, 0x03, 0x00, 0xaa},
{0x00, 0x12, 0x05, 0xaa},
{0x00, 0x13, 0x02, 0xaa},
@@ -2408,6 +2503,251 @@
{0x00, 0xb6, 0x39, 0xaa},
{0x00, 0xb7, 0x24, 0xaa},
/*write 89 0400 1415*/
+ {}
+};
+
+static const u8 poxxxx_init_common[][4] = {
+ {0xb3, 0x00, 0x04, 0xcc},
+ {0x00, 0x00, 0x10, 0xdd},
+ {0xb3, 0x00, 0x64, 0xcc},
+ {0x00, 0x00, 0x10, 0xdd},
+ {0xb3, 0x00, 0x65, 0xcc},
+ {0x00, 0x00, 0x10, 0xdd},
+ {0xb3, 0x00, 0x67, 0xcc},
+ {0xb0, 0x03, 0x09, 0xcc},
+ {0xb3, 0x05, 0x00, 0xcc},
+ {0xb3, 0x06, 0x00, 0xcc},
+ {0xb3, 0x5c, 0x01, 0xcc},
+ {0xb3, 0x08, 0x01, 0xcc},
+ {0xb3, 0x09, 0x0c, 0xcc},
+ {0xb3, 0x34, 0x01, 0xcc},
+ {0xb3, 0x35, 0xf6, 0xcc}, /* i2c add: 76 */
+ {0xb3, 0x02, 0xb0, 0xcc},
+ {0xb3, 0x03, 0x18, 0xcc},
+ {0xb3, 0x04, 0x15, 0xcc},
+ {0xb3, 0x20, 0x00, 0xcc},
+ {0xb3, 0x21, 0x00, 0xcc},
+ {0xb3, 0x22, 0x04, 0xcc},
+ {0xb3, 0x23, 0x00, 0xcc},
+ {0xb3, 0x14, 0x00, 0xcc},
+ {0xb3, 0x15, 0x00, 0xcc},
+ {0xb3, 0x16, 0x04, 0xcc},
+ {0xb3, 0x17, 0xff, 0xcc},
+ {0xb3, 0x2c, 0x03, 0xcc},
+ {0xb3, 0x2d, 0x56, 0xcc},
+ {0xb3, 0x2e, 0x02, 0xcc},
+ {0xb3, 0x2f, 0x0a, 0xcc},
+ {0xb3, 0x40, 0x00, 0xcc},
+ {0xb3, 0x41, 0x34, 0xcc},
+ {0xb3, 0x42, 0x01, 0xcc},
+ {0xb3, 0x43, 0xe0, 0xcc},
+ {0xbc, 0x00, 0x71, 0xcc},
+ {0xbc, 0x01, 0x01, 0xcc},
+ {0xb3, 0x01, 0x41, 0xcc},
+ {0xb3, 0x4d, 0x00, 0xcc},
+ {0x00, 0x0b, 0x2a, 0xaa},
+ {0x00, 0x0e, 0x03, 0xaa},
+ {0x00, 0x0f, 0xea, 0xaa},
+ {0x00, 0x12, 0x08, 0xaa},
+ {0x00, 0x1e, 0x06, 0xaa},
+ {0x00, 0x21, 0x00, 0xaa},
+ {0x00, 0x31, 0x1f, 0xaa},
+ {0x00, 0x33, 0x38, 0xaa},
+ {0x00, 0x36, 0xc0, 0xaa},
+ {0x00, 0x37, 0xc8, 0xaa},
+ {0x00, 0x3b, 0x36, 0xaa},
+ {0x00, 0x4b, 0xfe, 0xaa},
+ {0x00, 0x4d, 0x2e, 0xaa},
+ {0x00, 0x51, 0x1c, 0xaa},
+ {0x00, 0x52, 0x01, 0xaa},
+ {0x00, 0x55, 0x0a, 0xaa},
+ {0x00, 0x56, 0x0a, 0xaa},
+ {0x00, 0x57, 0x07, 0xaa},
+ {0x00, 0x58, 0x07, 0xaa},
+ {0x00, 0x59, 0x04, 0xaa},
+ {0x00, 0x70, 0x68, 0xaa},
+ {0x00, 0x71, 0x04, 0xaa},
+ {0x00, 0x72, 0x10, 0xaa},
+ {0x00, 0x80, 0x71, 0xaa},
+ {0x00, 0x81, 0x08, 0xaa},
+ {0x00, 0x82, 0x00, 0xaa},
+ {0x00, 0x83, 0x55, 0xaa},
+ {0x00, 0x84, 0x06, 0xaa},
+ {0x00, 0x85, 0x06, 0xaa},
+ {0x00, 0x8b, 0x25, 0xaa},
+ {0x00, 0x8c, 0x00, 0xaa},
+ {0x00, 0x8d, 0x86, 0xaa},
+ {0x00, 0x8e, 0x82, 0xaa},
+ {0x00, 0x8f, 0x2d, 0xaa},
+ {0x00, 0x90, 0x8b, 0xaa},
+ {0x00, 0x91, 0x81, 0xaa},
+ {0x00, 0x92, 0x81, 0xaa},
+ {0x00, 0x93, 0x23, 0xaa},
+ {0x00, 0xa3, 0x2a, 0xaa},
+ {0x00, 0xa4, 0x03, 0xaa},
+ {0x00, 0xa5, 0xea, 0xaa},
+ {0x00, 0xb0, 0x68, 0xaa},
+ {0x00, 0xbc, 0x04, 0xaa},
+ {0x00, 0xbe, 0x3b, 0xaa},
+ {0x00, 0x4e, 0x40, 0xaa},
+ {0x00, 0x06, 0x04, 0xaa},
+ {0x00, 0x07, 0x03, 0xaa},
+ {0x00, 0xcd, 0x18, 0xaa},
+ {0x00, 0x28, 0x03, 0xaa},
+ {0x00, 0x29, 0xef, 0xaa},
+/* reinit on alt 2 (qvga) or alt7 (vga) */
+ {0xb3, 0x05, 0x00, 0xcc},
+ {0xb3, 0x06, 0x00, 0xcc},
+ {0xb8, 0x00, 0x01, 0xcc},
+
+ {0x00, 0x1d, 0x85, 0xaa},
+ {0x00, 0x1e, 0xc6, 0xaa},
+ {0x00, 0x00, 0x40, 0xdd},
+ {0x00, 0x1d, 0x05, 0xaa},
+
+ {0x00, 0xd6, 0x22, 0xaa}, /* gamma 0 */
+ {0x00, 0x73, 0x00, 0xaa},
+ {0x00, 0x74, 0x0a, 0xaa},
+ {0x00, 0x75, 0x16, 0xaa},
+ {0x00, 0x76, 0x25, 0xaa},
+ {0x00, 0x77, 0x34, 0xaa},
+ {0x00, 0x78, 0x49, 0xaa},
+ {0x00, 0x79, 0x5a, 0xaa},
+ {0x00, 0x7a, 0x7f, 0xaa},
+ {0x00, 0x7b, 0x9b, 0xaa},
+ {0x00, 0x7c, 0xba, 0xaa},
+ {0x00, 0x7d, 0xd4, 0xaa},
+ {0x00, 0x7e, 0xea, 0xaa},
+
+ {0x00, 0xd6, 0x62, 0xaa}, /* gamma 1 */
+ {0x00, 0x73, 0x00, 0xaa},
+ {0x00, 0x74, 0x0a, 0xaa},
+ {0x00, 0x75, 0x16, 0xaa},
+ {0x00, 0x76, 0x25, 0xaa},
+ {0x00, 0x77, 0x34, 0xaa},
+ {0x00, 0x78, 0x49, 0xaa},
+ {0x00, 0x79, 0x5a, 0xaa},
+ {0x00, 0x7a, 0x7f, 0xaa},
+ {0x00, 0x7b, 0x9b, 0xaa},
+ {0x00, 0x7c, 0xba, 0xaa},
+ {0x00, 0x7d, 0xd4, 0xaa},
+ {0x00, 0x7e, 0xea, 0xaa},
+
+ {0x00, 0xd6, 0xa2, 0xaa}, /* gamma 2 */
+ {0x00, 0x73, 0x00, 0xaa},
+ {0x00, 0x74, 0x0a, 0xaa},
+ {0x00, 0x75, 0x16, 0xaa},
+ {0x00, 0x76, 0x25, 0xaa},
+ {0x00, 0x77, 0x34, 0xaa},
+ {0x00, 0x78, 0x49, 0xaa},
+ {0x00, 0x79, 0x5a, 0xaa},
+ {0x00, 0x7a, 0x7f, 0xaa},
+ {0x00, 0x7b, 0x9b, 0xaa},
+ {0x00, 0x7c, 0xba, 0xaa},
+ {0x00, 0x7d, 0xd4, 0xaa},
+ {0x00, 0x7e, 0xea, 0xaa},
+
+ {0x00, 0xaa, 0xff, 0xaa}, /* back light comp */
+ {0x00, 0xc4, 0x03, 0xaa},
+ {0x00, 0xc5, 0x19, 0xaa},
+ {0x00, 0xc6, 0x03, 0xaa},
+ {0x00, 0xc7, 0x91, 0xaa},
+ {0x00, 0xc8, 0x01, 0xaa},
+ {0x00, 0xc9, 0xdd, 0xaa},
+ {0x00, 0xca, 0x02, 0xaa},
+ {0x00, 0xcb, 0x37, 0xaa},
+
+/* read d1 */
+ {0x00, 0xd1, 0x3c, 0xaa},
+ {0x00, 0xb8, 0x28, 0xaa},
+ {0x00, 0xb9, 0x1e, 0xaa},
+ {0x00, 0xb6, 0x14, 0xaa},
+ {0x00, 0xb7, 0x0f, 0xaa},
+ {0x00, 0x5c, 0x10, 0xaa},
+ {0x00, 0x5d, 0x18, 0xaa},
+ {0x00, 0x5e, 0x24, 0xaa},
+ {0x00, 0x5f, 0x24, 0xaa},
+ {0x00, 0x86, 0x1a, 0xaa},
+ {0x00, 0x60, 0x00, 0xaa},
+ {0x00, 0x61, 0x1b, 0xaa},
+ {0x00, 0x62, 0x30, 0xaa},
+ {0x00, 0x63, 0x40, 0xaa},
+ {0x00, 0x87, 0x1a, 0xaa},
+ {0x00, 0x64, 0x00, 0xaa},
+ {0x00, 0x65, 0x08, 0xaa},
+ {0x00, 0x66, 0x10, 0xaa},
+ {0x00, 0x67, 0x20, 0xaa},
+ {0x00, 0x88, 0x10, 0xaa},
+ {0x00, 0x68, 0x00, 0xaa},
+ {0x00, 0x69, 0x08, 0xaa},
+ {0x00, 0x6a, 0x0f, 0xaa},
+ {0x00, 0x6b, 0x0f, 0xaa},
+ {0x00, 0x89, 0x07, 0xaa},
+ {0x00, 0xd5, 0x4c, 0xaa},
+ {0x00, 0x0a, 0x00, 0xaa},
+ {0x00, 0x0b, 0x2a, 0xaa},
+ {0x00, 0x0e, 0x03, 0xaa},
+ {0x00, 0x0f, 0xea, 0xaa},
+ {0x00, 0xa2, 0x00, 0xaa},
+ {0x00, 0xa3, 0x2a, 0xaa},
+ {0x00, 0xa4, 0x03, 0xaa},
+ {0x00, 0xa5, 0xea, 0xaa},
+ {}
+};
+static const u8 poxxxx_initVGA[][4] = {
+ {0x00, 0x20, 0x11, 0xaa},
+ {0x00, 0x33, 0x38, 0xaa},
+ {0x00, 0xbb, 0x0d, 0xaa},
+ {0xb3, 0x22, 0x01, 0xcc},
+ {0xb3, 0x23, 0xe0, 0xcc},
+ {0xb3, 0x16, 0x02, 0xcc},
+ {0xb3, 0x17, 0x7f, 0xcc},
+ {0xb3, 0x02, 0xb0, 0xcc},
+ {0xb3, 0x06, 0x00, 0xcc},
+ {0xb3, 0x5c, 0x01, 0xcc},
+ {0x00, 0x04, 0x06, 0xaa},
+ {0x00, 0x05, 0x3f, 0xaa},
+ {0x00, 0x04, 0x00, 0xdd}, /* delay 1s */
+ {}
+};
+static const u8 poxxxx_initQVGA[][4] = {
+ {0x00, 0x20, 0x33, 0xaa},
+ {0x00, 0x33, 0x38, 0xaa},
+ {0x00, 0xbb, 0x0d, 0xaa},
+ {0xb3, 0x22, 0x00, 0xcc},
+ {0xb3, 0x23, 0xf0, 0xcc},
+ {0xb3, 0x16, 0x01, 0xcc},
+ {0xb3, 0x17, 0x3f, 0xcc},
+ {0xb3, 0x02, 0xb0, 0xcc},
+ {0xb3, 0x06, 0x01, 0xcc},
+ {0xb3, 0x5c, 0x00, 0xcc},
+ {0x00, 0x04, 0x06, 0xaa},
+ {0x00, 0x05, 0x3f, 0xaa},
+ {0x00, 0x04, 0x00, 0xdd}, /* delay 1s */
+ {}
+};
+static const u8 poxxxx_init_end_1[][4] = {
+ {0x00, 0x47, 0x25, 0xaa},
+ {0x00, 0x48, 0x80, 0xaa},
+ {0x00, 0x49, 0x1f, 0xaa},
+ {0x00, 0x4a, 0x40, 0xaa},
+ {0x00, 0x44, 0x40, 0xaa},
+ {0x00, 0xab, 0x4a, 0xaa},
+ {0x00, 0xb1, 0x00, 0xaa},
+ {0x00, 0xb2, 0x04, 0xaa},
+ {0x00, 0xb3, 0x08, 0xaa},
+ {0x00, 0xb4, 0x0b, 0xaa},
+ {0x00, 0xb5, 0x0d, 0xaa},
+ {0x00, 0x59, 0x7e, 0xaa}, /* sharpness */
+ {0x00, 0x16, 0x00, 0xaa}, /* white balance */
+ {0x00, 0x18, 0x00, 0xaa},
+ {}
+};
+static const u8 poxxxx_init_end_2[][4] = {
+ {0x00, 0x1d, 0x85, 0xaa},
+ {0x00, 0x1e, 0x06, 0xaa},
+ {0x00, 0x1d, 0x05, 0xaa},
+ {}
};
struct sensor_info {
@@ -2420,33 +2760,89 @@
u8 op;
};
-static const struct sensor_info sensor_info_data[] = {
-/* sensorId, I2cAdd, IdAdd, VpId, m1, m2, op */
+/* probe values */
+static const struct sensor_info vc0321_probe_data[] = {
+/* sensorId, I2cAdd, IdAdd, VpId, m1, m2, op */
+/* 0 OV9640 */
{-1, 0x80 | 0x30, 0x0a, 0x0000, 0x25, 0x24, 0x05},
+/* 1 ICM108T (may respond on IdAdd == 0x83 - tested in vc032x_probe_sensor) */
{-1, 0x80 | 0x20, 0x82, 0x0000, 0x24, 0x25, 0x01},
-/* (tested in vc032x_probe_sensor) */
-/* {-1, 0x80 | 0x20, 0x83, 0x0000, 0x24, 0x25, 0x01}, */
- {SENSOR_PO3130NC, 0x80 | 0x76, 0x00, 0x3130, 0x24, 0x25, 0x01},
- {SENSOR_MI1310_SOC, 0x80 | 0x5d, 0x00, 0x143a, 0x24, 0x25, 0x01},
-/* (tested in vc032x_probe_sensor) */
+/* 2 PO2130 (may detect PO3130NC - tested in vc032x_probe_sensor)*/
+ {-1, 0x80 | 0x76, 0x00, 0x0000, 0x24, 0x25, 0x01},
+/* 3 MI1310 */
+ {-1, 0x80 | 0x5d, 0x00, 0x0000, 0x24, 0x25, 0x01},
+/* 4 MI360 - tested in vc032x_probe_sensor */
/* {SENSOR_MI0360, 0x80 | 0x5d, 0x00, 0x8243, 0x24, 0x25, 0x01}, */
+/* 5 7131R */
{SENSOR_HV7131R, 0x80 | 0x11, 0x00, 0x0209, 0x24, 0x25, 0x01},
+/* 6 OV7649 */
{-1, 0x80 | 0x21, 0x0a, 0x0000, 0x21, 0x20, 0x05},
+/* 7 PAS302BCW */
{-1, 0x80 | 0x40, 0x00, 0x0000, 0x20, 0x22, 0x05},
+/* 8 OV7660 */
{SENSOR_OV7660, 0x80 | 0x21, 0x0a, 0x7660, 0x26, 0x26, 0x05},
-/* {SENSOR_PO3130NC, 0x80 | 0x76, 0x00, 0x0000, 0x24, 0x25, 0x01}, */
+/* 9 PO3130NC - (tested in vc032x_probe_sensor) */
+/* {SENSOR_PO3130NC, 0x80 | 0x76, 0x00, 0x3130, 0x24, 0x25, 0x01}, */
+/* 10 PO1030KC */
{-1, 0x80 | 0x6e, 0x00, 0x0000, 0x24, 0x25, 0x01},
-/* {SENSOR_MI1310_SOC, 0x80 | 0x5d, 0x00, 0x0000, 0x24, 0x25, 0x01}, */
-/* {-1, 0x80 | 0x30, 0x0a, 0x0000, 0x25, 0x24, 0x05}, */
+/* 11 MI1310_SOC */
+ {SENSOR_MI1310_SOC, 0x80 | 0x5d, 0x00, 0x143a, 0x24, 0x25, 0x01},
+/* 12 OV9650 */
+ {-1, 0x80 | 0x30, 0x0a, 0x0000, 0x25, 0x24, 0x05},
+/* 13 S5K532 */
{-1, 0x80 | 0x11, 0x39, 0x0000, 0x24, 0x25, 0x01},
+/* 14 MI360_SOC - ??? */
+/* 15 PO1200N */
{SENSOR_PO1200, 0x80 | 0x5c, 0x00, 0x1200, 0x67, 0x67, 0x01},
- {-1, 0x80 | 0x2d, 0x00, 0x0000, 0x65, 0x67, 0x01},
+/* 16 PO3030K */
+ {-1, 0x80 | 0x18, 0x00, 0x0000, 0x24, 0x25, 0x01},
+/* 17 PO2030 */
{-1, 0x80 | 0x6e, 0x00, 0x0000, 0x24, 0x25, 0x01},
+/* ?? */
+ {-1, 0x80 | 0x56, 0x01, 0x0000, 0x64, 0x67, 0x01},
+ {SENSOR_MI1320, 0x80 | 0x48, 0x00, 0x148c, 0x64, 0x65, 0x01},
+};
+static const struct sensor_info vc0323_probe_data[] = {
+/* sensorId, I2cAdd, IdAdd, VpId, m1, m2, op */
+/* 0 OV9640 */
+ {-1, 0x80 | 0x30, 0x0a, 0x0000, 0x25, 0x24, 0x05},
+/* 1 ICM108T (may respond on IdAdd == 0x83 - tested in vc032x_probe_sensor) */
+ {-1, 0x80 | 0x20, 0x82, 0x0000, 0x24, 0x25, 0x01},
+/* 2 PO2130 (may detect PO3130NC - tested in vc032x_probe_sensor)*/
+ {-1, 0x80 | 0x76, 0x00, 0x0000, 0x24, 0x25, 0x01},
+/* 3 MI1310 */
+ {-1, 0x80 | 0x5d, 0x00, 0x0000, 0x24, 0x25, 0x01},
+/* 4 MI360 - tested in vc032x_probe_sensor */
+/* {SENSOR_MI0360, 0x80 | 0x5d, 0x00, 0x8243, 0x24, 0x25, 0x01}, */
+/* 5 7131R */
+ {SENSOR_HV7131R, 0x80 | 0x11, 0x00, 0x0209, 0x24, 0x25, 0x01},
+/* 6 OV7649 */
+ {-1, 0x80 | 0x21, 0x0a, 0x0000, 0x21, 0x20, 0x05},
+/* 7 PAS302BCW */
+ {-1, 0x80 | 0x40, 0x00, 0x0000, 0x20, 0x22, 0x05},
+/* 8 OV7660 */
+ {SENSOR_OV7660, 0x80 | 0x21, 0x0a, 0x7660, 0x26, 0x26, 0x05},
+/* 9 PO3130NC - (tested in vc032x_probe_sensor) */
+/* {SENSOR_PO3130NC, 0x80 | 0x76, 0x00, 0x3130, 0x24, 0x25, 0x01}, */
+/* 10 PO1030KC */
+ {-1, 0x80 | 0x6e, 0x00, 0x0000, 0x24, 0x25, 0x01},
+/* 11 MI1310_SOC */
+ {SENSOR_MI1310_SOC, 0x80 | 0x5d, 0x00, 0x143a, 0x24, 0x25, 0x01},
+/* 12 OV9650 */
+ {-1, 0x80 | 0x30, 0x0a, 0x0000, 0x25, 0x24, 0x05},
+/* 13 S5K532 */
+ {-1, 0x80 | 0x11, 0x39, 0x0000, 0x24, 0x25, 0x01},
+/* 14 MI360_SOC - ??? */
+/* 15 PO1200N */
+ {SENSOR_PO1200, 0x80 | 0x5c, 0x00, 0x1200, 0x67, 0x67, 0x01},
+/* 16 ?? */
+ {-1, 0x80 | 0x2d, 0x00, 0x0000, 0x65, 0x67, 0x01},
+/* 17 PO2030 */
+ {-1, 0x80 | 0x6e, 0x00, 0x0000, 0x24, 0x25, 0x01},
+/* ?? */
{-1, 0x80 | 0x56, 0x01, 0x0000, 0x64, 0x67, 0x01},
{SENSOR_MI1320_SOC, 0x80 | 0x48, 0x00, 0x148c, 0x64, 0x67, 0x01},
-/*fixme: previously detected?*/
- {SENSOR_MI1320, 0x80 | 0x48, 0x00, 0x148c, 0x64, 0x65, 0x01},
-/*fixme: not in the ms-win probe - may be found before?*/
+/*fixme: not in the ms-win probe - may be found before? */
{SENSOR_OV7670, 0x80 | 0x21, 0x0a, 0x7673, 0x66, 0x67, 0x05},
};
@@ -2520,7 +2916,7 @@
{
struct sd *sd = (struct sd *) gspca_dev;
struct usb_device *dev = gspca_dev->dev;
- int i;
+ int i, n;
u16 value;
const struct sensor_info *ptsensor_info;
@@ -2531,9 +2927,16 @@
}
reg_r(gspca_dev, 0xa1, 0xbfcf, 1);
- PDEBUG(D_PROBE, "check sensor header %02x", gspca_dev->usb_buf[0]);
- for (i = 0; i < ARRAY_SIZE(sensor_info_data); i++) {
- ptsensor_info = &sensor_info_data[i];
+ PDEBUG(D_PROBE, "vc032%d check sensor header %02x",
+ sd->bridge == BRIDGE_VC0321 ? 1 : 3, gspca_dev->usb_buf[0]);
+ if (sd->bridge == BRIDGE_VC0321) {
+ ptsensor_info = vc0321_probe_data;
+ n = ARRAY_SIZE(vc0321_probe_data);
+ } else {
+ ptsensor_info = vc0323_probe_data;
+ n = ARRAY_SIZE(vc0323_probe_data);
+ }
+ for (i = 0; i < n; i++) {
reg_w(dev, 0xa0, 0x02, 0xb334);
reg_w(dev, 0xa0, ptsensor_info->m1, 0xb300);
reg_w(dev, 0xa0, ptsensor_info->m2, 0xb300);
@@ -2551,13 +2954,15 @@
return ptsensor_info->sensorId;
switch (value) {
+ case 0x3130:
+ return SENSOR_PO3130NC;
case 0x7673:
return SENSOR_OV7670;
case 0x8243:
return SENSOR_MI0360;
}
-/*fixme: should return here*/
}
+ ptsensor_info++;
}
return -1;
}
@@ -2619,7 +3024,7 @@
i2c_write(gspca_dev, data[i][0], &data[i][1], 2);
break;
case 0xdd:
- msleep(data[i][2] + 10);
+ msleep(data[i][1] * 256 + data[i][2] + 10);
break;
}
i++;
@@ -2646,12 +3051,17 @@
64, /* OV7670 6 */
128, /* PO1200 7 */
128, /* PO3130NC 8 */
+ 128, /* POxxxx 9 */
};
cam = &gspca_dev->cam;
sd->bridge = id->driver_info >> 8;
sd->flags = id->driver_info & 0xff;
- sensor = vc032x_probe_sensor(gspca_dev);
+ if (id->idVendor == 0x046d &&
+ (id->idProduct == 0x0892 || id->idProduct == 0x0896))
+ sensor = SENSOR_POxxxx;
+ else
+ sensor = vc032x_probe_sensor(gspca_dev);
switch (sensor) {
case -1:
PDEBUG(D_PROBE, "Unknown sensor...");
@@ -2684,6 +3094,9 @@
case SENSOR_PO3130NC:
PDEBUG(D_PROBE, "Find Sensor PO3130NC");
break;
+ case SENSOR_POxxxx:
+ PDEBUG(D_PROBE, "Sensor POxxxx");
+ break;
}
sd->sensor = sensor;
@@ -2712,27 +3125,18 @@
}
cam->npkt = npkt[sd->sensor];
+ sd->brightness = BRIGHTNESS_DEF;
+ sd->contrast = CONTRAST_DEF;
+ sd->colors = COLOR_DEF;
sd->hflip = HFLIP_DEF;
sd->vflip = VFLIP_DEF;
+ sd->lightfreq = FREQ_DEF;
+ sd->sharpness = SHARPNESS_DEF;
+
+ gspca_dev->ctrl_dis = ctrl_dis[sd->sensor];
+
if (sd->sensor == SENSOR_OV7670)
sd->flags |= FL_HFLIP | FL_VFLIP;
- sd->lightfreq = FREQ_DEF;
- if (sd->sensor != SENSOR_OV7670)
- gspca_dev->ctrl_dis = (1 << LIGHTFREQ_IDX);
- switch (sd->sensor) {
- case SENSOR_MI1310_SOC:
- case SENSOR_MI1320_SOC:
- case SENSOR_OV7660:
- case SENSOR_OV7670:
- case SENSOR_PO1200:
- break;
- default:
- gspca_dev->ctrl_dis = (1 << HFLIP_IDX)
- | (1 << VFLIP_IDX);
- break;
- }
-
- sd->sharpness = SHARPNESS_DEF;
if (sd->bridge == BRIDGE_VC0321) {
reg_r(gspca_dev, 0x8a, 0, 3);
@@ -2747,10 +3151,55 @@
/* this function is called at probe and resume time */
static int sd_init(struct gspca_dev *gspca_dev)
{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ if (sd->sensor == SENSOR_POxxxx) {
+ reg_r(gspca_dev, 0xa1, 0xb300, 1);
+ if (gspca_dev->usb_buf[0] != 0) {
+ reg_w(gspca_dev->dev, 0xa0, 0x26, 0xb300);
+ reg_w(gspca_dev->dev, 0xa0, 0x04, 0xb300);
+ reg_w(gspca_dev->dev, 0xa0, 0x00, 0xb300);
+ }
+ }
return 0;
}
-/* some sensors only */
+static void setbrightness(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ u8 data;
+
+ if (gspca_dev->ctrl_dis & (1 << BRIGHTNESS_IDX))
+ return;
+ data = sd->brightness;
+ if (data >= 0x80)
+ data &= 0x7f;
+ else
+ data = 0xff ^ data;
+ i2c_write(gspca_dev, 0x98, &data, 1);
+}
+
+static void setcontrast(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ if (gspca_dev->ctrl_dis & (1 << CONTRAST_IDX))
+ return;
+ i2c_write(gspca_dev, 0x99, &sd->contrast, 1);
+}
+
+static void setcolors(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ u8 data;
+
+ if (gspca_dev->ctrl_dis & (1 << COLORS_IDX))
+ return;
+ data = sd->colors - (sd->colors >> 3) - 1;
+ i2c_write(gspca_dev, 0x94, &data, 1);
+ i2c_write(gspca_dev, 0x95, &sd->colors, 1);
+}
+
static void sethvflip(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
@@ -2764,6 +3213,7 @@
vflip = !vflip;
switch (sd->sensor) {
case SENSOR_MI1310_SOC:
+ case SENSOR_MI1320:
case SENSOR_MI1320_SOC:
data[0] = data[1] = 0; /* select page 0 */
i2c_write(gspca_dev, 0xf0, data, 2);
@@ -2801,18 +3251,29 @@
usb_exchange(gspca_dev, ov7660_freq_tb[sd->lightfreq]);
}
-/* po1200 only */
static void setsharpness(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
u8 data;
- if (sd->sensor != SENSOR_PO1200)
- return;
- data = 0;
- i2c_write(gspca_dev, 0x03, &data, 1);
- data = 0xb5 + sd->sharpness * 3;
- i2c_write(gspca_dev, 0x61, &data, 1);
+ switch (sd->sensor) {
+ case SENSOR_PO1200:
+ data = 0;
+ i2c_write(gspca_dev, 0x03, &data, 1);
+ if (sd->sharpness < 0)
+ data = 0x6a;
+ else
+ data = 0xb5 + sd->sharpness * 3;
+ i2c_write(gspca_dev, 0x61, &data, 1);
+ break;
+ case SENSOR_POxxxx:
+ if (sd->sharpness < 0)
+ data = 0x7e; /* def = max */
+ else
+ data = 0x60 + sd->sharpness * 0x0f;
+ i2c_write(gspca_dev, 0x59, &data, 1);
+ break;
+ }
}
static int sd_start(struct gspca_dev *gspca_dev)
@@ -2922,12 +3383,27 @@
usb_exchange(gspca_dev, init);
init = po3130_rundata;
break;
- default:
-/* case SENSOR_PO1200: */
+ case SENSOR_PO1200:
GammaT = po1200_gamma;
MatrixT = po1200_matrix;
init = po1200_initVGA_data;
break;
+ default:
+/* case SENSOR_POxxxx: */
+ usb_exchange(gspca_dev, poxxxx_init_common);
+ if (mode)
+ init = poxxxx_initQVGA;
+ else
+ init = poxxxx_initVGA;
+ usb_exchange(gspca_dev, init);
+ reg_r(gspca_dev, 0x8c, 0x0000, 3);
+ reg_w(gspca_dev->dev, 0xa0,
+ gspca_dev->usb_buf[2] & 1 ? 0 : 1,
+ 0xb35c);
+ msleep(300);
+/*fixme: i2c read 04 and 05*/
+ init = poxxxx_init_end_1;
+ break;
}
usb_exchange(gspca_dev, init);
if (GammaT && MatrixT) {
@@ -2936,7 +3412,6 @@
put_tab_to_reg(gspca_dev, GammaT, 17, 0xb86c);
put_tab_to_reg(gspca_dev, MatrixT, 9, 0xb82c);
- /* set the led on 0x0892 0x0896 */
switch (sd->sensor) {
case SENSOR_PO1200:
case SENSOR_HV7131R:
@@ -2945,16 +3420,22 @@
case SENSOR_MI1310_SOC:
reg_w(gspca_dev->dev, 0x89, 0x058c, 0x0000);
break;
- default:
- if (!(sd->flags & FL_SAMSUNG))
- reg_w(gspca_dev->dev, 0x89, 0xffff, 0xfdff);
- break;
}
msleep(100);
setsharpness(gspca_dev);
sethvflip(gspca_dev);
setlightfreq(gspca_dev);
}
+ if (sd->sensor == SENSOR_POxxxx) {
+ setcolors(gspca_dev);
+ setbrightness(gspca_dev);
+ setcontrast(gspca_dev);
+
+ /* led on */
+ msleep(80);
+ reg_w(gspca_dev->dev, 0x89, 0xffff, 0xfdff);
+ usb_exchange(gspca_dev, poxxxx_init_end_2);
+ }
return 0;
}
@@ -2963,10 +3444,17 @@
struct usb_device *dev = gspca_dev->dev;
struct sd *sd = (struct sd *) gspca_dev;
- if (sd->sensor == SENSOR_MI1310_SOC)
+ switch (sd->sensor) {
+ case SENSOR_MI1310_SOC:
reg_w(dev, 0x89, 0x058c, 0x00ff);
- else if (!(sd->flags & FL_SAMSUNG))
- reg_w(dev, 0x89, 0xffff, 0xffff);
+ break;
+ case SENSOR_POxxxx:
+ return;
+ default:
+ if (!(sd->flags & FL_SAMSUNG))
+ reg_w(dev, 0x89, 0xffff, 0xffff);
+ break;
+ }
reg_w(dev, 0xa0, 0x01, 0xb301);
reg_w(dev, 0xa0, 0x09, 0xb003);
}
@@ -2984,6 +3472,12 @@
reg_w(dev, 0x89, 0x058c, 0x00ff);
else if (!(sd->flags & FL_SAMSUNG))
reg_w(dev, 0x89, 0xffff, 0xffff);
+
+ if (sd->sensor == SENSOR_POxxxx) {
+ reg_w(dev, 0xa0, 0x26, 0xb300);
+ reg_w(dev, 0xa0, 0x04, 0xb300);
+ reg_w(dev, 0xa0, 0x00, 0xb300);
+ }
}
static void sd_pkt_scan(struct gspca_dev *gspca_dev,
@@ -3020,6 +3514,60 @@
gspca_frame_add(gspca_dev, INTER_PACKET, data, len);
}
+static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->brightness = val;
+ if (gspca_dev->streaming)
+ setbrightness(gspca_dev);
+ return 0;
+}
+
+static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ *val = sd->brightness;
+ return 0;
+}
+
+static int sd_setcontrast(struct gspca_dev *gspca_dev, __s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->contrast = val;
+ if (gspca_dev->streaming)
+ setcontrast(gspca_dev);
+ return 0;
+}
+
+static int sd_getcontrast(struct gspca_dev *gspca_dev, __s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ *val = sd->contrast;
+ return 0;
+}
+
+static int sd_setcolors(struct gspca_dev *gspca_dev, __s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->colors = val;
+ if (gspca_dev->streaming)
+ setcolors(gspca_dev);
+ return 0;
+}
+
+static int sd_getcolors(struct gspca_dev *gspca_dev, __s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ *val = sd->colors;
+ return 0;
+}
+
static int sd_sethflip(struct gspca_dev *gspca_dev, __s32 val)
{
struct sd *sd = (struct sd *) gspca_dev;
diff --git a/drivers/media/video/gspca/zc3xx.c b/drivers/media/video/gspca/zc3xx.c
index 1a800fc..50986da 100644
--- a/drivers/media/video/gspca/zc3xx.c
+++ b/drivers/media/video/gspca/zc3xx.c
@@ -1,9 +1,8 @@
/*
- * Z-Star/Vimicro zc301/zc302p/vc30x library
- * Copyright (C) 2004 2005 2006 Michel Xhaard
- * mxhaard@magic.fr
+ * Z-Star/Vimicro zc301/zc302p/vc30x library
*
- * V4L2 by Jean-Francois Moine <http://moinejf.free.fr>
+ * Copyright (C) 2009-2010 Jean-Francois Moine <http://moinejf.free.fr>
+ * Copyright (C) 2004 2005 2006 Michel Xhaard mxhaard@magic.fr
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -22,10 +21,11 @@
#define MODULE_NAME "zc3xx"
+#include <linux/input.h>
#include "gspca.h"
#include "jpeg.h"
-MODULE_AUTHOR("Michel Xhaard <mxhaard@users.sourceforge.net>, "
+MODULE_AUTHOR("Jean-Francois Moine <http://moinejf.free.fr>, "
"Serge A. Suchkov <Serge.A.S@tochka.ru>");
MODULE_DESCRIPTION("GSPCA ZC03xx/VC3xx USB Camera Driver");
MODULE_LICENSE("GPL");
@@ -39,18 +39,18 @@
struct sd {
struct gspca_dev gspca_dev; /* !! must be the first item */
- __u8 brightness;
- __u8 contrast;
- __u8 gamma;
- __u8 autogain;
- __u8 lightfreq;
- __u8 sharpness;
+ u8 brightness;
+ u8 contrast;
+ u8 gamma;
+ u8 autogain;
+ u8 lightfreq;
+ u8 sharpness;
u8 quality; /* image quality */
#define QUALITY_MIN 40
#define QUALITY_MAX 60
#define QUALITY_DEF 50
- signed char sensor; /* Type of image sensor chip */
+ u8 sensor; /* Type of image sensor chip */
/* !! values used in different tables */
#define SENSOR_ADCM2700 0
#define SENSOR_CS2102 1
@@ -92,9 +92,8 @@
static int sd_setsharpness(struct gspca_dev *gspca_dev, __s32 val);
static int sd_getsharpness(struct gspca_dev *gspca_dev, __s32 *val);
-static struct ctrl sd_ctrls[] = {
+static const struct ctrl sd_ctrls[] = {
#define BRIGHTNESS_IDX 0
-#define SD_BRIGHTNESS 0
{
{
.id = V4L2_CID_BRIGHTNESS,
@@ -103,26 +102,26 @@
.minimum = 0,
.maximum = 255,
.step = 1,
- .default_value = 128,
+#define BRIGHTNESS_DEF 128
+ .default_value = BRIGHTNESS_DEF,
},
.set = sd_setbrightness,
.get = sd_getbrightness,
},
-#define SD_CONTRAST 1
{
{
.id = V4L2_CID_CONTRAST,
.type = V4L2_CTRL_TYPE_INTEGER,
.name = "Contrast",
.minimum = 0,
- .maximum = 256,
+ .maximum = 255,
.step = 1,
- .default_value = 128,
+#define CONTRAST_DEF 128
+ .default_value = CONTRAST_DEF,
},
.set = sd_setcontrast,
.get = sd_getcontrast,
},
-#define SD_GAMMA 2
{
{
.id = V4L2_CID_GAMMA,
@@ -136,7 +135,6 @@
.set = sd_setgamma,
.get = sd_getgamma,
},
-#define SD_AUTOGAIN 3
{
{
.id = V4L2_CID_AUTOGAIN,
@@ -145,13 +143,13 @@
.minimum = 0,
.maximum = 1,
.step = 1,
- .default_value = 1,
+#define AUTOGAIN_DEF 1
+ .default_value = AUTOGAIN_DEF,
},
.set = sd_setautogain,
.get = sd_getautogain,
},
#define LIGHTFREQ_IDX 4
-#define SD_FREQ 4
{
{
.id = V4L2_CID_POWER_LINE_FREQUENCY,
@@ -160,12 +158,12 @@
.minimum = 0,
.maximum = 2, /* 0: 0, 1: 50Hz, 2:60Hz */
.step = 1,
- .default_value = 1,
+#define FREQ_DEF 0
+ .default_value = FREQ_DEF,
},
.set = sd_setfreq,
.get = sd_getfreq,
},
-#define SD_SHARPNESS 5
{
{
.id = V4L2_CID_SHARPNESS,
@@ -174,7 +172,8 @@
.minimum = 0,
.maximum = 3,
.step = 1,
- .default_value = 2,
+#define SHARPNESS_DEF 2
+ .default_value = SHARPNESS_DEF,
},
.set = sd_setsharpness,
.get = sd_getsharpness,
@@ -194,6 +193,19 @@
.priv = 0},
};
+static const struct v4l2_pix_format broken_vga_mode[] = {
+ {320, 232, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+ .bytesperline = 320,
+ .sizeimage = 320 * 232 * 4 / 8 + 590,
+ .colorspace = V4L2_COLORSPACE_JPEG,
+ .priv = 1},
+ {640, 472, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+ .bytesperline = 640,
+ .sizeimage = 640 * 472 * 3 / 8 + 590,
+ .colorspace = V4L2_COLORSPACE_JPEG,
+ .priv = 0},
+};
+
static const struct v4l2_pix_format sif_mode[] = {
{176, 144, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
.bytesperline = 176,
@@ -209,9 +221,9 @@
/* usb exchanges */
struct usb_action {
- __u8 req;
- __u8 val;
- __u16 idx;
+ u8 req;
+ u8 val;
+ u16 idx;
};
static const struct usb_action adcm2700_Initial[] = {
@@ -421,7 +433,7 @@
{0xaa, 0xfe, 0x0010}, /* 00,fe,10,aa */
{}
};
-static const struct usb_action cs2102_Initial[] = { /* 320x240 */
+static const struct usb_action cs2102_InitialScale[] = { /* 320x240 */
{0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL},
{0xa0, 0x10, ZC3XX_R002_CLOCKSELECT},
{0xa0, 0x00, ZC3XX_R010_CMOSSENSORSELECT},
@@ -473,7 +485,7 @@
{}
};
-static const struct usb_action cs2102_InitialScale[] = { /* 640x480 */
+static const struct usb_action cs2102_Initial[] = { /* 640x480 */
{0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL},
{0xa0, 0x00, ZC3XX_R002_CLOCKSELECT},
{0xa0, 0x00, ZC3XX_R010_CMOSSENSORSELECT},
@@ -524,7 +536,7 @@
{0xa0, 0x00, 0x01ad},
{}
};
-static const struct usb_action cs2102_50HZ[] = {
+static const struct usb_action cs2102_50HZScale[] = {
{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
{0xaa, 0x23, 0x0001},
{0xaa, 0x24, 0x005f},
@@ -546,7 +558,7 @@
{0xa0, 0xff, ZC3XX_R020_HSYNC_3},
{}
};
-static const struct usb_action cs2102_50HZScale[] = {
+static const struct usb_action cs2102_50HZ[] = {
{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
{0xaa, 0x23, 0x0000},
{0xaa, 0x24, 0x00af},
@@ -568,7 +580,7 @@
{0xa0, 0xff, ZC3XX_R020_HSYNC_3},
{}
};
-static const struct usb_action cs2102_60HZ[] = {
+static const struct usb_action cs2102_60HZScale[] = {
{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
{0xaa, 0x23, 0x0001},
{0xaa, 0x24, 0x0055},
@@ -590,7 +602,7 @@
{0xa0, 0xff, ZC3XX_R020_HSYNC_3},
{}
};
-static const struct usb_action cs2102_60HZScale[] = {
+static const struct usb_action cs2102_60HZ[] = {
{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
{0xaa, 0x23, 0x0000},
{0xaa, 0x24, 0x00aa},
@@ -612,7 +624,7 @@
{0xa0, 0xff, ZC3XX_R020_HSYNC_3},
{}
};
-static const struct usb_action cs2102_NoFliker[] = {
+static const struct usb_action cs2102_NoFlikerScale[] = {
{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
{0xaa, 0x23, 0x0001},
{0xaa, 0x24, 0x005f},
@@ -634,7 +646,7 @@
{0xa0, 0xff, ZC3XX_R020_HSYNC_3},
{}
};
-static const struct usb_action cs2102_NoFlikerScale[] = {
+static const struct usb_action cs2102_NoFliker[] = {
{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
{0xaa, 0x23, 0x0000},
{0xaa, 0x24, 0x00af},
@@ -658,7 +670,7 @@
};
/* CS2102_KOCOM */
-static const struct usb_action cs2102K_Initial[] = {
+static const struct usb_action cs2102K_InitialScale[] = {
{0xa0, 0x11, ZC3XX_R002_CLOCKSELECT},
{0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},
{0xa0, 0x08, ZC3XX_R010_CMOSSENSORSELECT},
@@ -917,7 +929,7 @@
{}
};
-static const struct usb_action cs2102K_InitialScale[] = {
+static const struct usb_action cs2102K_Initial[] = {
{0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL},
{0xa0, 0x00, ZC3XX_R002_CLOCKSELECT},
{0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},
@@ -1495,7 +1507,7 @@
{}
};
-static const struct usb_action hdcs2020xb_Initial[] = {
+static const struct usb_action hdcs2020b_InitialScale[] = {
{0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL},
{0xa0, 0x11, ZC3XX_R002_CLOCKSELECT},
{0xa0, 0x03, ZC3XX_R008_CLOCKSETTING}, /* qtable 0x05 */
@@ -1627,7 +1639,7 @@
{0xa0, 0x40, ZC3XX_R118_BGAIN},
{}
};
-static const struct usb_action hdcs2020xb_InitialScale[] = {
+static const struct usb_action hdcs2020b_Initial[] = {
{0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL},
{0xa0, 0x00, ZC3XX_R002_CLOCKSELECT},
{0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},
@@ -1819,7 +1831,7 @@
{}
};
-static const struct usb_action hv7131bxx_Initial[] = { /* 320x240 */
+static const struct usb_action hv7131b_InitialScale[] = { /* 320x240 */
{0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL},
{0xa0, 0x10, ZC3XX_R002_CLOCKSELECT},
{0xa0, 0x00, ZC3XX_R010_CMOSSENSORSELECT},
@@ -1866,7 +1878,7 @@
{}
};
-static const struct usb_action hv7131bxx_InitialScale[] = { /* 640x480*/
+static const struct usb_action hv7131b_Initial[] = { /* 640x480*/
{0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL},
{0xa0, 0x00, ZC3XX_R002_CLOCKSELECT},
{0xa0, 0x00, ZC3XX_R010_CMOSSENSORSELECT},
@@ -2063,7 +2075,7 @@
{}
};
-static const struct usb_action hv7131cxx_Initial[] = {
+static const struct usb_action hv7131r_InitialScale[] = {
{0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL},
{0xa0, 0x10, ZC3XX_R002_CLOCKSELECT},
{0xa0, 0x01, ZC3XX_R010_CMOSSENSORSELECT},
@@ -2157,7 +2169,7 @@
{}
};
-static const struct usb_action hv7131cxx_InitialScale[] = {
+static const struct usb_action hv7131r_Initial[] = {
{0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL},
{0xa0, 0x00, ZC3XX_R002_CLOCKSELECT}, /* diff */
@@ -2259,7 +2271,7 @@
{}
};
-static const struct usb_action icm105axx_Initial[] = {
+static const struct usb_action icm105a_InitialScale[] = {
{0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL},
{0xa0, 0x10, ZC3XX_R002_CLOCKSELECT},
{0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},
@@ -2436,7 +2448,7 @@
{}
};
-static const struct usb_action icm105axx_InitialScale[] = {
+static const struct usb_action icm105a_Initial[] = {
{0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL},
{0xa0, 0x00, ZC3XX_R002_CLOCKSELECT},
{0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},
@@ -2615,7 +2627,7 @@
{0xa0, 0x40, ZC3XX_R118_BGAIN},
{}
};
-static const struct usb_action icm105a_50HZ[] = {
+static const struct usb_action icm105a_50HZScale[] = {
{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS}, /* 00,19,00,cc */
{0xaa, 0x0d, 0x0003}, /* 00,0d,03,aa */
{0xaa, 0x0c, 0x0020}, /* 00,0c,20,aa */
@@ -2646,7 +2658,7 @@
{0xa0, 0xff, ZC3XX_R020_HSYNC_3}, /* 00,20,ff,cc */
{}
};
-static const struct usb_action icm105a_50HZScale[] = {
+static const struct usb_action icm105a_50HZ[] = {
{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS}, /* 00,19,00,cc */
{0xaa, 0x0d, 0x0003}, /* 00,0d,03,aa */
{0xaa, 0x0c, 0x008c}, /* 00,0c,8c,aa */
@@ -2679,7 +2691,7 @@
{0xa0, 0xc0, ZC3XX_R1A8_DIGITALGAIN}, /* 01,a8,c0,cc */
{}
};
-static const struct usb_action icm105a_60HZ[] = {
+static const struct usb_action icm105a_60HZScale[] = {
{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS}, /* 00,19,00,cc */
{0xaa, 0x0d, 0x0003}, /* 00,0d,03,aa */
{0xaa, 0x0c, 0x0004}, /* 00,0c,04,aa */
@@ -2710,7 +2722,7 @@
{0xa0, 0xff, ZC3XX_R020_HSYNC_3}, /* 00,20,ff,cc */
{}
};
-static const struct usb_action icm105a_60HZScale[] = {
+static const struct usb_action icm105a_60HZ[] = {
{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS}, /* 00,19,00,cc */
{0xaa, 0x0d, 0x0003}, /* 00,0d,03,aa */
{0xaa, 0x0c, 0x0008}, /* 00,0c,08,aa */
@@ -2743,7 +2755,7 @@
{0xa0, 0xc0, ZC3XX_R1A8_DIGITALGAIN}, /* 01,a8,c0,cc */
{}
};
-static const struct usb_action icm105a_NoFliker[] = {
+static const struct usb_action icm105a_NoFlikerScale[] = {
{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS}, /* 00,19,00,cc */
{0xaa, 0x0d, 0x0003}, /* 00,0d,03,aa */
{0xaa, 0x0c, 0x0004}, /* 00,0c,04,aa */
@@ -2774,7 +2786,7 @@
{0xa0, 0xff, ZC3XX_R020_HSYNC_3}, /* 00,20,ff,cc */
{}
};
-static const struct usb_action icm105a_NoFlikerScale[] = {
+static const struct usb_action icm105a_NoFliker[] = {
{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS}, /* 00,19,00,cc */
{0xaa, 0x0d, 0x0003}, /* 00,0d,03,aa */
{0xaa, 0x0c, 0x0004}, /* 00,0c,04,aa */
@@ -2808,7 +2820,7 @@
{}
};
-static const struct usb_action MC501CB_InitialScale[] = {
+static const struct usb_action mc501cb_Initial[] = {
{0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL}, /* 00,00,01,cc */
{0xa0, 0x00, ZC3XX_R002_CLOCKSELECT}, /* 00,02,00,cc */
{0xa0, 0x01, ZC3XX_R010_CMOSSENSORSELECT}, /* 00,10,01,cc */
@@ -2928,7 +2940,7 @@
{}
};
-static const struct usb_action MC501CB_Initial[] = { /* 320x240 */
+static const struct usb_action mc501cb_InitialScale[] = { /* 320x240 */
{0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL}, /* 00,00,01,cc */
{0xa0, 0x10, ZC3XX_R002_CLOCKSELECT}, /* 00,02,10,cc */
{0xa0, 0x01, ZC3XX_R010_CMOSSENSORSELECT}, /* 00,10,01,cc */
@@ -3047,7 +3059,7 @@
{}
};
-static const struct usb_action MC501CB_50HZ[] = {
+static const struct usb_action mc501cb_50HZScale[] = {
{0xaa, 0x03, 0x0003}, /* 00,03,03,aa */
{0xaa, 0x10, 0x00fc}, /* 00,10,fc,aa */
{0xaa, 0x36, 0x001d}, /* 00,36,1D,aa */
@@ -3064,7 +3076,7 @@
{}
};
-static const struct usb_action MC501CB_50HZScale[] = {
+static const struct usb_action mc501cb_50HZ[] = {
{0xaa, 0x03, 0x0003}, /* 00,03,03,aa */
{0xaa, 0x10, 0x00fc}, /* 00,10,fc,aa */
{0xaa, 0x36, 0x003a}, /* 00,36,3A,aa */
@@ -3081,7 +3093,7 @@
{}
};
-static const struct usb_action MC501CB_60HZ[] = {
+static const struct usb_action mc501cb_60HZScale[] = {
{0xaa, 0x03, 0x0003}, /* 00,03,03,aa */
{0xaa, 0x10, 0x00fc}, /* 00,10,fc,aa */
{0xaa, 0x36, 0x0018}, /* 00,36,18,aa */
@@ -3098,7 +3110,7 @@
{}
};
-static const struct usb_action MC501CB_60HZScale[] = {
+static const struct usb_action mc501cb_60HZ[] = {
{0xaa, 0x03, 0x0003}, /* 00,03,03,aa */
{0xaa, 0x10, 0x00fc}, /* 00,10,fc,aa */
{0xaa, 0x36, 0x0030}, /* 00,36,30,aa */
@@ -3115,7 +3127,7 @@
{}
};
-static const struct usb_action MC501CB_NoFliker[] = {
+static const struct usb_action mc501cb_NoFlikerScale[] = {
{0xaa, 0x03, 0x0003}, /* 00,03,03,aa */
{0xaa, 0x10, 0x00fc}, /* 00,10,fc,aa */
{0xaa, 0x36, 0x0018}, /* 00,36,18,aa */
@@ -3132,7 +3144,7 @@
{}
};
-static const struct usb_action MC501CB_NoFlikerScale[] = {
+static const struct usb_action mc501cb_NoFliker[] = {
{0xaa, 0x03, 0x0003}, /* 00,03,03,aa */
{0xaa, 0x10, 0x00fc}, /* 00,10,fc,aa */
{0xaa, 0x36, 0x0030}, /* 00,36,30,aa */
@@ -3144,8 +3156,8 @@
{}
};
-/* from zs211.inf - HKR,%OV7620%,Initial - 640x480 */
-static const struct usb_action OV7620_mode0[] = {
+/* from zs211.inf */
+static const struct usb_action ov7620_Initial[] = { /* 640x480 */
{0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL}, /* 00,00,01,cc */
{0xa0, 0x40, ZC3XX_R002_CLOCKSELECT}, /* 00,02,40,cc */
{0xa0, 0x00, ZC3XX_R008_CLOCKSETTING}, /* 00,08,00,cc */
@@ -3214,9 +3226,7 @@
{0xa0, 0x50, ZC3XX_R1A8_DIGITALGAIN}, /* 01,a8,50,cc */
{}
};
-
-/* from zs211.inf - HKR,%OV7620%,InitialScale - 320x240 */
-static const struct usb_action OV7620_mode1[] = {
+static const struct usb_action ov7620_InitialScale[] = { /* 320x240 */
{0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL}, /* 00,00,01,cc */
{0xa0, 0x50, ZC3XX_R002_CLOCKSELECT}, /* 00,02,50,cc */
{0xa0, 0x03, ZC3XX_R008_CLOCKSETTING}, /* 00,08,00,cc */
@@ -3287,9 +3297,7 @@
{0xa0, 0x50, ZC3XX_R1A8_DIGITALGAIN}, /* 01,a8,50,cc */
{}
};
-
-/* from zs211.inf - HKR,%OV7620%\AE,50HZ */
-static const struct usb_action OV7620_50HZ[] = {
+static const struct usb_action ov7620_50HZ[] = {
{0xaa, 0x13, 0x00a3}, /* 00,13,a3,aa */
{0xdd, 0x00, 0x0100}, /* 00,01,00,dd */
{0xaa, 0x2b, 0x0096}, /* 00,2b,96,aa */
@@ -3307,9 +3315,7 @@
if mode0 (640x480) */
{}
};
-
-/* from zs211.inf - HKR,%OV7620%\AE,60HZ */
-static const struct usb_action OV7620_60HZ[] = {
+static const struct usb_action ov7620_60HZ[] = {
{0xaa, 0x13, 0x00a3}, /* 00,13,a3,aa */
/* (bug in zs211.inf) */
{0xdd, 0x00, 0x0100}, /* 00,01,00,dd */
@@ -3331,9 +3337,7 @@
{0xa1, 0x01, 0x0037}, */
{}
};
-
-/* from zs211.inf - HKR,%OV7620%\AE,NoFliker */
-static const struct usb_action OV7620_NoFliker[] = {
+static const struct usb_action ov7620_NoFliker[] = {
{0xaa, 0x13, 0x00a3}, /* 00,13,a3,aa */
/* (bug in zs211.inf) */
{0xdd, 0x00, 0x0100}, /* 00,01,00,dd */
@@ -3354,7 +3358,7 @@
{}
};
-static const struct usb_action ov7630c_Initial[] = {
+static const struct usb_action ov7630c_InitialScale[] = {
{0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL},
{0xa0, 0x10, ZC3XX_R002_CLOCKSELECT},
{0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL},
@@ -3511,7 +3515,7 @@
{}
};
-static const struct usb_action ov7630c_InitialScale[] = {
+static const struct usb_action ov7630c_Initial[] = {
{0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL},
{0xa0, 0x00, ZC3XX_R002_CLOCKSELECT},
{0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},
@@ -3682,7 +3686,7 @@
{}
};
-static const struct usb_action pas106b_Initial[] = { /* 176x144 */
+static const struct usb_action pas106b_InitialScale[] = { /* 176x144 */
/* JPEG control */
{0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},
/* Sream and Sensor specific */
@@ -3800,7 +3804,7 @@
{}
};
-static const struct usb_action pas106b_InitialScale[] = { /* 352x288 */
+static const struct usb_action pas106b_Initial[] = { /* 352x288 */
/* JPEG control */
{0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},
/* Sream and Sensor specific */
@@ -3972,10 +3976,10 @@
{}
};
-/* from usbvm31b.inf */
+/* from lvWIMv.inf 046d:08a2/:08aa 2007/06/03 */
static const struct usb_action pas202b_Initial[] = { /* 640x480 */
{0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL}, /* 00,00,01,cc */
- {0xa0, 0x00, ZC3XX_R008_CLOCKSETTING}, /* 00,08,00,cc */
+ {0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},
{0xa0, 0x0e, ZC3XX_R010_CMOSSENSORSELECT}, /* 00,10,0e,cc */
{0xa0, 0x00, ZC3XX_R002_CLOCKSELECT}, /* 00,02,00,cc */
{0xa0, 0x02, ZC3XX_R003_FRAMEWIDTHHIGH}, /* 00,03,02,cc */
@@ -4000,7 +4004,7 @@
{0xaa, 0x09, 0x0006}, /* 00,09,06,aa */
{0xaa, 0x0a, 0x0001}, /* 00,0a,01,aa */
{0xaa, 0x0b, 0x0001}, /* 00,0b,01,aa */
- {0xaa, 0x0c, 0x0008}, /* 00,0c,08,aa */
+ {0xaa, 0x0c, 0x0006},
{0xaa, 0x0d, 0x0000}, /* 00,0d,00,aa */
{0xaa, 0x10, 0x0000}, /* 00,10,00,aa */
{0xaa, 0x12, 0x0005}, /* 00,12,05,aa */
@@ -4019,13 +4023,13 @@
};
static const struct usb_action pas202b_InitialScale[] = { /* 320x240 */
{0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL}, /* 00,00,01,cc */
- {0xa0, 0x00, ZC3XX_R008_CLOCKSETTING}, /* 00,08,00,cc */
+ {0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},
{0xa0, 0x0e, ZC3XX_R010_CMOSSENSORSELECT}, /* 00,10,0e,cc */
{0xa0, 0x10, ZC3XX_R002_CLOCKSELECT}, /* 00,02,10,cc */
{0xa0, 0x02, ZC3XX_R003_FRAMEWIDTHHIGH}, /* 00,03,02,cc */
{0xa0, 0x80, ZC3XX_R004_FRAMEWIDTHLOW}, /* 00,04,80,cc */
{0xa0, 0x01, ZC3XX_R005_FRAMEHEIGHTHIGH}, /* 00,05,01,cc */
- {0xa0, 0xd0, ZC3XX_R006_FRAMEHEIGHTLOW}, /* 00,06,d0,cc */
+ {0xa0, 0xe0, ZC3XX_R006_FRAMEHEIGHTLOW},
{0xa0, 0x01, ZC3XX_R001_SYSTEMOPERATING}, /* 00,01,01,cc */
{0xa0, 0x03, ZC3XX_R012_VIDEOCONTROLFUNC}, /* 00,12,03,cc */
{0xa0, 0x01, ZC3XX_R012_VIDEOCONTROLFUNC}, /* 00,12,01,cc */
@@ -4035,7 +4039,7 @@
{0xa0, 0x08, ZC3XX_R11A_FIRSTYLOW}, /* 01,1a,08,cc */
{0xa0, 0x02, ZC3XX_R11C_FIRSTXLOW}, /* 01,1c,02,cc */
{0xa0, 0x01, ZC3XX_R09B_WINHEIGHTHIGH}, /* 00,9b,01,cc */
- {0xa0, 0xd8, ZC3XX_R09C_WINHEIGHTLOW}, /* 00,9c,d8,cc */
+ {0xa0, 0xe8, ZC3XX_R09C_WINHEIGHTLOW},
{0xa0, 0x02, ZC3XX_R09D_WINWIDTHHIGH}, /* 00,9d,02,cc */
{0xa0, 0x88, ZC3XX_R09E_WINWIDTHLOW}, /* 00,9e,88,cc */
{0xaa, 0x02, 0x0002}, /* 00,02,02,aa */
@@ -4044,7 +4048,7 @@
{0xaa, 0x09, 0x0006}, /* 00,09,06,aa */
{0xaa, 0x0a, 0x0001}, /* 00,0a,01,aa */
{0xaa, 0x0b, 0x0001}, /* 00,0b,01,aa */
- {0xaa, 0x0c, 0x0008}, /* 00,0c,08,aa */
+ {0xaa, 0x0c, 0x0006},
{0xaa, 0x0d, 0x0000}, /* 00,0d,00,aa */
{0xaa, 0x10, 0x0000}, /* 00,10,00,aa */
{0xaa, 0x12, 0x0005}, /* 00,12,05,aa */
@@ -4059,6 +4063,8 @@
{0xa0, 0x08, ZC3XX_R250_DEADPIXELSMODE}, /* 02,50,08,cc */
{0xa0, 0x08, ZC3XX_R301_EEPROMACCESS}, /* 03,01,08,cc */
{0xa0, 0x70, ZC3XX_R18D_YTARGET}, /* 01,8d,70,cc */
+ {0xa0, 0xff, ZC3XX_R097_WINYSTARTHIGH},
+ {0xa0, 0xfe, ZC3XX_R098_WINYSTARTLOW},
{}
};
static const struct usb_action pas202b_50HZ[] = {
@@ -4066,22 +4072,22 @@
{0xa0, 0x20, ZC3XX_R087_EXPTIMEMID}, /* 00,87,20,cc */
{0xa0, 0x21, ZC3XX_R088_EXPTIMELOW}, /* 00,88,21,cc */
{0xaa, 0x20, 0x0002}, /* 00,20,02,aa */
- {0xaa, 0x21, 0x0068}, /* 00,21,68,aa */
+ {0xaa, 0x21, 0x001b},
{0xaa, 0x03, 0x0044}, /* 00,03,44,aa */
- {0xaa, 0x04, 0x0009}, /* 00,04,09,aa */
- {0xaa, 0x05, 0x0028}, /* 00,05,28,aa */
+ {0xaa, 0x04, 0x0008},
+ {0xaa, 0x05, 0x001b},
{0xaa, 0x0e, 0x0001}, /* 00,0e,01,aa */
{0xaa, 0x0f, 0x0000}, /* 00,0f,00,aa */
- {0xa0, 0x14, ZC3XX_R1A9_DIGITALLIMITDIFF}, /* 01,a9,14,cc */
+ {0xa0, 0x1c, ZC3XX_R1A9_DIGITALLIMITDIFF},
{0xa0, 0x24, ZC3XX_R1AA_DIGITALGAINSTEP}, /* 01,aa,24,cc */
{0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH}, /* 01,90,00,cc */
- {0xa0, 0x07, ZC3XX_R191_EXPOSURELIMITMID}, /* 01,91,07,cc */
- {0xa0, 0xd2, ZC3XX_R192_EXPOSURELIMITLOW}, /* 01,92,d2,cc */
+ {0xa0, 0x02, ZC3XX_R191_EXPOSURELIMITMID},
+ {0xa0, 0x1b, ZC3XX_R192_EXPOSURELIMITLOW},
{0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH}, /* 01,95,00,cc */
{0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID}, /* 01,96,00,cc */
{0xa0, 0x4d, ZC3XX_R197_ANTIFLICKERLOW}, /* 01,97,4d,cc */
- {0xa0, 0x10, ZC3XX_R18C_AEFREEZE}, /* 01,8c,10,cc */
- {0xa0, 0x20, ZC3XX_R18F_AEUNFREEZE}, /* 01,8f,20,cc */
+ {0xa0, 0x0e, ZC3XX_R18C_AEFREEZE},
+ {0xa0, 0x1b, ZC3XX_R18F_AEUNFREEZE},
{0xa0, 0x44, ZC3XX_R01D_HSYNC_0}, /* 00,1d,44,cc */
{0xa0, 0x6f, ZC3XX_R01E_HSYNC_1}, /* 00,1e,6f,cc */
{0xa0, 0xad, ZC3XX_R01F_HSYNC_2}, /* 00,1f,ad,cc */
@@ -4094,23 +4100,23 @@
{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS}, /* 00,19,00,cc */
{0xa0, 0x20, ZC3XX_R087_EXPTIMEMID}, /* 00,87,20,cc */
{0xa0, 0x21, ZC3XX_R088_EXPTIMELOW}, /* 00,88,21,cc */
- {0xaa, 0x20, 0x0002}, /* 00,20,02,aa */
- {0xaa, 0x21, 0x006c}, /* 00,21,6c,aa */
+ {0xaa, 0x20, 0x0004},
+ {0xaa, 0x21, 0x003d},
{0xaa, 0x03, 0x0041}, /* 00,03,41,aa */
- {0xaa, 0x04, 0x0009}, /* 00,04,09,aa */
- {0xaa, 0x05, 0x002c}, /* 00,05,2c,aa */
+ {0xaa, 0x04, 0x0010},
+ {0xaa, 0x05, 0x003d},
{0xaa, 0x0e, 0x0001}, /* 00,0e,01,aa */
{0xaa, 0x0f, 0x0000}, /* 00,0f,00,aa */
- {0xa0, 0x14, ZC3XX_R1A9_DIGITALLIMITDIFF}, /* 01,a9,14,cc */
+ {0xa0, 0x1c, ZC3XX_R1A9_DIGITALLIMITDIFF},
{0xa0, 0x24, ZC3XX_R1AA_DIGITALGAINSTEP}, /* 01,aa,24,cc */
{0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH}, /* 01,90,00,cc */
- {0xa0, 0x0f, ZC3XX_R191_EXPOSURELIMITMID}, /* 01,91,0f,cc */
- {0xa0, 0xbe, ZC3XX_R192_EXPOSURELIMITLOW}, /* 01,92,be,cc */
+ {0xa0, 0x04, ZC3XX_R191_EXPOSURELIMITMID},
+ {0xa0, 0x3d, ZC3XX_R192_EXPOSURELIMITLOW},
{0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH}, /* 01,95,00,cc */
{0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID}, /* 01,96,00,cc */
{0xa0, 0x9b, ZC3XX_R197_ANTIFLICKERLOW}, /* 01,97,9b,cc */
- {0xa0, 0x10, ZC3XX_R18C_AEFREEZE}, /* 01,8c,10,cc */
- {0xa0, 0x20, ZC3XX_R18F_AEUNFREEZE}, /* 01,8f,20,cc */
+ {0xa0, 0x0e, ZC3XX_R18C_AEFREEZE},
+ {0xa0, 0x1b, ZC3XX_R18F_AEUNFREEZE},
{0xa0, 0x41, ZC3XX_R01D_HSYNC_0}, /* 00,1d,41,cc */
{0xa0, 0x6f, ZC3XX_R01E_HSYNC_1}, /* 00,1e,6f,cc */
{0xa0, 0xad, ZC3XX_R01F_HSYNC_2}, /* 00,1f,ad,cc */
@@ -4130,16 +4136,16 @@
{0xaa, 0x05, 0x0000}, /* 00,05,00,aa */
{0xaa, 0x0e, 0x0001}, /* 00,0e,01,aa */
{0xaa, 0x0f, 0x0000}, /* 00,0f,00,aa */
- {0xa0, 0x14, ZC3XX_R1A9_DIGITALLIMITDIFF}, /* 01,a9,14,cc */
+ {0xa0, 0x1c, ZC3XX_R1A9_DIGITALLIMITDIFF},
{0xa0, 0x24, ZC3XX_R1AA_DIGITALGAINSTEP}, /* 01,aa,24,cc */
{0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH}, /* 01,90,00,cc */
- {0xa0, 0x07, ZC3XX_R191_EXPOSURELIMITMID}, /* 01,91,07,cc */
- {0xa0, 0xc0, ZC3XX_R192_EXPOSURELIMITLOW}, /* 01,92,c0,cc */
+ {0xa0, 0x02, ZC3XX_R191_EXPOSURELIMITMID},
+ {0xa0, 0x00, ZC3XX_R192_EXPOSURELIMITLOW},
{0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH}, /* 01,95,00,cc */
{0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID}, /* 01,96,00,cc */
{0xa0, 0x40, ZC3XX_R197_ANTIFLICKERLOW}, /* 01,97,40,cc */
- {0xa0, 0x10, ZC3XX_R18C_AEFREEZE}, /* 01,8c,10,cc */
- {0xa0, 0x20, ZC3XX_R18F_AEUNFREEZE}, /* 01,8f,20,cc */
+ {0xa0, 0x0e, ZC3XX_R18C_AEFREEZE},
+ {0xa0, 0x1b, ZC3XX_R18F_AEUNFREEZE},
{0xa0, 0x45, ZC3XX_R01D_HSYNC_0}, /* 00,1d,45,cc */
{0xa0, 0x8e, ZC3XX_R01E_HSYNC_1}, /* 00,1e,8e,cc */
{0xa0, 0xc1, ZC3XX_R01F_HSYNC_2}, /* 00,1f,c1,cc */
@@ -4152,23 +4158,23 @@
{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS}, /* 00,19,00,cc */
{0xa0, 0x20, ZC3XX_R087_EXPTIMEMID}, /* 00,87,20,cc */
{0xa0, 0x21, ZC3XX_R088_EXPTIMELOW}, /* 00,88,21,cc */
- {0xaa, 0x20, 0x0002}, /* 00,20,02,aa */
- {0xaa, 0x21, 0x0004}, /* 00,21,04,aa */
+ {0xaa, 0x20, 0x0004},
+ {0xaa, 0x21, 0x0008},
{0xaa, 0x03, 0x0042}, /* 00,03,42,aa */
- {0xaa, 0x04, 0x0008}, /* 00,04,08,aa */
- {0xaa, 0x05, 0x0004}, /* 00,05,04,aa */
+ {0xaa, 0x04, 0x0010},
+ {0xaa, 0x05, 0x0008},
{0xaa, 0x0e, 0x0001}, /* 00,0e,01,aa */
{0xaa, 0x0f, 0x0000}, /* 00,0f,00,aa */
- {0xa0, 0x14, ZC3XX_R1A9_DIGITALLIMITDIFF}, /* 01,a9,14,cc */
+ {0xa0, 0x1c, ZC3XX_R1A9_DIGITALLIMITDIFF},
{0xa0, 0x24, ZC3XX_R1AA_DIGITALGAINSTEP}, /* 01,aa,24,cc */
{0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH}, /* 01,90,00,cc */
- {0xa0, 0x0f, ZC3XX_R191_EXPOSURELIMITMID}, /* 01,91,0f,cc */
- {0xa0, 0x9f, ZC3XX_R192_EXPOSURELIMITLOW}, /* 01,92,9f,cc */
+ {0xa0, 0x04, ZC3XX_R191_EXPOSURELIMITMID},
+ {0xa0, 0x08, ZC3XX_R192_EXPOSURELIMITLOW},
{0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH}, /* 01,95,00,cc */
{0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID}, /* 01,96,00,cc */
{0xa0, 0x81, ZC3XX_R197_ANTIFLICKERLOW}, /* 01,97,81,cc */
- {0xa0, 0x10, ZC3XX_R18C_AEFREEZE}, /* 01,8c,10,cc */
- {0xa0, 0x20, ZC3XX_R18F_AEUNFREEZE}, /* 01,8f,20,cc */
+ {0xa0, 0x0e, ZC3XX_R18C_AEFREEZE},
+ {0xa0, 0x1b, ZC3XX_R18F_AEUNFREEZE},
{0xa0, 0x42, ZC3XX_R01D_HSYNC_0}, /* 00,1d,42,cc */
{0xa0, 0x6f, ZC3XX_R01E_HSYNC_1}, /* 00,1e,6f,cc */
{0xa0, 0xaf, ZC3XX_R01F_HSYNC_2}, /* 00,1f,af,cc */
@@ -4182,22 +4188,22 @@
{0xa0, 0x20, ZC3XX_R087_EXPTIMEMID}, /* 00,87,20,cc */
{0xa0, 0x21, ZC3XX_R088_EXPTIMELOW}, /* 00,88,21,cc */
{0xaa, 0x20, 0x0002}, /* 00,20,02,aa */
- {0xaa, 0x21, 0x0020}, /* 00,21,20,aa */
+ {0xaa, 0x21, 0x0006},
{0xaa, 0x03, 0x0040}, /* 00,03,40,aa */
{0xaa, 0x04, 0x0008}, /* 00,04,08,aa */
- {0xaa, 0x05, 0x0020}, /* 00,05,20,aa */
+ {0xaa, 0x05, 0x0006},
{0xaa, 0x0e, 0x0001}, /* 00,0e,01,aa */
{0xaa, 0x0f, 0x0000}, /* 00,0f,00,aa */
{0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH}, /* 01,90,00,cc */
- {0xa0, 0x07, ZC3XX_R191_EXPOSURELIMITMID}, /* 01,91,07,cc */
- {0xa0, 0xf0, ZC3XX_R192_EXPOSURELIMITLOW}, /* 01,92,f0,cc */
+ {0xa0, 0x02, ZC3XX_R191_EXPOSURELIMITMID},
+ {0xa0, 0x06, ZC3XX_R192_EXPOSURELIMITLOW},
{0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH}, /* 01,95,00,cc */
{0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID}, /* 01,96,00,cc */
- {0xa0, 0x02, ZC3XX_R197_ANTIFLICKERLOW}, /* 01,97,02,cc */
+ {0xa0, 0x01, ZC3XX_R197_ANTIFLICKERLOW},
{0xa0, 0x10, ZC3XX_R18C_AEFREEZE}, /* 01,8c,10,cc */
{0xa0, 0x20, ZC3XX_R18F_AEUNFREEZE}, /* 01,8f,20,cc */
{0xa0, 0x00, ZC3XX_R1A9_DIGITALLIMITDIFF}, /* 01,a9,00,cc */
- {0xa0, 0x00, ZC3XX_R1AA_DIGITALGAINSTEP}, /* 01,aa,00,cc */
+ {0xa0, 0x24, ZC3XX_R1AA_DIGITALGAINSTEP},
{0xa0, 0x40, ZC3XX_R01D_HSYNC_0}, /* 00,1d,40,cc */
{0xa0, 0x60, ZC3XX_R01E_HSYNC_1}, /* 00,1e,60,cc */
{0xa0, 0x90, ZC3XX_R01F_HSYNC_2}, /* 00,1f,90,cc */
@@ -4210,23 +4216,23 @@
{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS}, /* 00,19,00,cc */
{0xa0, 0x20, ZC3XX_R087_EXPTIMEMID}, /* 00,87,20,cc */
{0xa0, 0x21, ZC3XX_R088_EXPTIMELOW}, /* 00,88,21,cc */
- {0xaa, 0x20, 0x0002}, /* 00,20,02,aa */
- {0xaa, 0x21, 0x0010}, /* 00,21,10,aa */
+ {0xaa, 0x20, 0x0004},
+ {0xaa, 0x21, 0x000c},
{0xaa, 0x03, 0x0040}, /* 00,03,40,aa */
- {0xaa, 0x04, 0x0008}, /* 00,04,08,aa */
- {0xaa, 0x05, 0x0010}, /* 00,05,10,aa */
+ {0xaa, 0x04, 0x0010},
+ {0xaa, 0x05, 0x000c},
{0xaa, 0x0e, 0x0001}, /* 00,0e,01,aa */
{0xaa, 0x0f, 0x0000}, /* 00,0f,00,aa */
{0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH}, /* 01,90,00,cc */
- {0xa0, 0x0f, ZC3XX_R191_EXPOSURELIMITMID}, /* 01,91,0f,cc */
- {0xa0, 0xf0, ZC3XX_R192_EXPOSURELIMITLOW}, /* 01,92,f0,cc */
+ {0xa0, 0x04, ZC3XX_R191_EXPOSURELIMITMID},
+ {0xa0, 0x0c, ZC3XX_R192_EXPOSURELIMITLOW},
{0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH}, /* 01,95,00,cc */
{0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID}, /* 01,96,00,cc */
{0xa0, 0x02, ZC3XX_R197_ANTIFLICKERLOW}, /* 01,97,02,cc */
{0xa0, 0x10, ZC3XX_R18C_AEFREEZE}, /* 01,8c,10,cc */
{0xa0, 0x20, ZC3XX_R18F_AEUNFREEZE}, /* 01,8f,20,cc */
{0xa0, 0x00, ZC3XX_R1A9_DIGITALLIMITDIFF}, /* 01,a9,00,cc */
- {0xa0, 0x00, ZC3XX_R1AA_DIGITALGAINSTEP}, /* 01,aa,00,cc */
+ {0xa0, 0x24, ZC3XX_R1AA_DIGITALGAINSTEP},
{0xa0, 0x40, ZC3XX_R01D_HSYNC_0}, /* 00,1d,40,cc */
{0xa0, 0x60, ZC3XX_R01E_HSYNC_1}, /* 00,1e,60,cc */
{0xa0, 0x90, ZC3XX_R01F_HSYNC_2}, /* 00,1f,90,cc */
@@ -4713,8 +4719,8 @@
{}
};
-/* from oem9.inf - HKR,%PO2030%,Initial - 640x480 - (close to CS2102) */
-static const struct usb_action PO2030_mode0[] = {
+/* from oem9.inf */
+static const struct usb_action po2030_Initial[] = { /* 640x480 */
{0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL}, /* 00,00,01,cc */
{0xa0, 0x04, ZC3XX_R002_CLOCKSELECT}, /* 00,02,04,cc */
{0xa0, 0x01, ZC3XX_R010_CMOSSENSORSELECT}, /* 00,10,01,cc */
@@ -4790,8 +4796,8 @@
{}
};
-/* from oem9.inf - HKR,%PO2030%,InitialScale - 320x240 */
-static const struct usb_action PO2030_mode1[] = {
+/* from oem9.inf */
+static const struct usb_action po2030_InitialScale[] = { /* 320x240 */
{0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL}, /* 00,00,01,cc */
{0xa0, 0x10, ZC3XX_R002_CLOCKSELECT}, /* 00,02,10,cc */
{0xa0, 0x01, ZC3XX_R010_CMOSSENSORSELECT}, /* 00,10,01,cc */
@@ -4867,7 +4873,7 @@
{}
};
-static const struct usb_action PO2030_50HZ[] = {
+static const struct usb_action po2030_50HZ[] = {
{0xaa, 0x8d, 0x0008}, /* 00,8d,08,aa */
{0xaa, 0x1a, 0x0001}, /* 00,1a,01,aa */
{0xaa, 0x1b, 0x000a}, /* 00,1b,0a,aa */
@@ -4889,7 +4895,7 @@
{}
};
-static const struct usb_action PO2030_60HZ[] = {
+static const struct usb_action po2030_60HZ[] = {
{0xaa, 0x8d, 0x0008}, /* 00,8d,08,aa */
{0xaa, 0x1a, 0x0000}, /* 00,1a,00,aa */
{0xaa, 0x1b, 0x00de}, /* 00,1b,de,aa */
@@ -4912,7 +4918,7 @@
{}
};
-static const struct usb_action PO2030_NoFliker[] = {
+static const struct usb_action po2030_NoFliker[] = {
{0xa0, 0x02, ZC3XX_R180_AUTOCORRECTENABLE}, /* 01,80,02,cc */
{0xaa, 0x8d, 0x000d}, /* 00,8d,0d,aa */
{0xaa, 0x1a, 0x0000}, /* 00,1a,00,aa */
@@ -4924,7 +4930,7 @@
};
/* TEST */
-static const struct usb_action tas5130CK_Initial[] = {
+static const struct usb_action tas5130cK_InitialScale[] = {
{0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL},
{0xa0, 0x01, 0x003b},
{0xa0, 0x0e, 0x003a},
@@ -5127,7 +5133,7 @@
{}
};
-static const struct usb_action tas5130CK_InitialScale[] = {
+static const struct usb_action tas5130cK_Initial[] = {
{0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL},
{0xa0, 0x01, 0x003b},
{0xa0, 0x0e, 0x003a},
@@ -5560,7 +5566,7 @@
{}
};
-static const struct usb_action tas5130c_vf0250_Initial[] = {
+static const struct usb_action tas5130c_vf0250_InitialScale[] = {
{0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL}, /* 00,00,01,cc, */
{0xa0, 0x02, ZC3XX_R008_CLOCKSETTING}, /* 00,08,02,cc, */
{0xa0, 0x01, ZC3XX_R010_CMOSSENSORSELECT}, /* 00,10,01,cc, */
@@ -5627,7 +5633,7 @@
{}
};
-static const struct usb_action tas5130c_vf0250_InitialScale[] = {
+static const struct usb_action tas5130c_vf0250_Initial[] = {
{0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL}, /* 00,00,01,cc, */
{0xa0, 0x02, ZC3XX_R008_CLOCKSETTING}, /* 00,08,02,cc, */
{0xa0, 0x01, ZC3XX_R010_CMOSSENSORSELECT}, /* 00,10,01,cc, */
@@ -5692,8 +5698,7 @@
{0xa0, 0x65, ZC3XX_R118_BGAIN}, /* 01,18,65,cc */
{}
};
-/* "50HZ" light frequency banding filter */
-static const struct usb_action tas5130c_vf0250_50HZ[] = {
+static const struct usb_action tas5130c_vf0250_50HZScale[] = {
{0xaa, 0x82, 0x0000}, /* 00,82,00,aa */
{0xaa, 0x83, 0x0001}, /* 00,83,01,aa */
{0xaa, 0x84, 0x00aa}, /* 00,84,aa,aa */
@@ -5717,8 +5722,7 @@
{}
};
-/* "50HZScale" light frequency banding filter */
-static const struct usb_action tas5130c_vf0250_50HZScale[] = {
+static const struct usb_action tas5130c_vf0250_50HZ[] = {
{0xaa, 0x82, 0x0000}, /* 00,82,00,aa */
{0xaa, 0x83, 0x0003}, /* 00,83,03,aa */
{0xaa, 0x84, 0x0054}, /* 00,84,54,aa */
@@ -5742,8 +5746,7 @@
{}
};
-/* "60HZ" light frequency banding filter */
-static const struct usb_action tas5130c_vf0250_60HZ[] = {
+static const struct usb_action tas5130c_vf0250_60HZScale[] = {
{0xaa, 0x82, 0x0000}, /* 00,82,00,aa */
{0xaa, 0x83, 0x0001}, /* 00,83,01,aa */
{0xaa, 0x84, 0x0062}, /* 00,84,62,aa */
@@ -5767,8 +5770,7 @@
{}
};
-/* "60HZScale" light frequency banding ilter */
-static const struct usb_action tas5130c_vf0250_60HZScale[] = {
+static const struct usb_action tas5130c_vf0250_60HZ[] = {
{0xaa, 0x82, 0x0000}, /* 00,82,00,aa */
{0xaa, 0x83, 0x0002}, /* 00,83,02,aa */
{0xaa, 0x84, 0x00c4}, /* 00,84,c4,aa */
@@ -5792,8 +5794,7 @@
{}
};
-/* "NoFliker" light frequency banding flter */
-static const struct usb_action tas5130c_vf0250_NoFliker[] = {
+static const struct usb_action tas5130c_vf0250_NoFlikerScale[] = {
{0xa0, 0x0c, ZC3XX_R100_OPERATIONMODE}, /* 01,00,0c,cc, */
{0xaa, 0x82, 0x0000}, /* 00,82,00,aa */
{0xaa, 0x83, 0x0000}, /* 00,83,00,aa */
@@ -5815,8 +5816,7 @@
{}
};
-/* "NoFlikerScale" light frequency banding filter */
-static const struct usb_action tas5130c_vf0250_NoFlikerScale[] = {
+static const struct usb_action tas5130c_vf0250_NoFliker[] = {
{0xa0, 0x0c, ZC3XX_R100_OPERATIONMODE}, /* 01,00,0c,cc, */
{0xaa, 0x82, 0x0000}, /* 00,82,00,aa */
{0xaa, 0x83, 0x0000}, /* 00,83,00,aa */
@@ -5839,7 +5839,7 @@
};
static u8 reg_r_i(struct gspca_dev *gspca_dev,
- __u16 index)
+ u16 index)
{
usb_control_msg(gspca_dev->dev,
usb_rcvctrlpipe(gspca_dev->dev, 0),
@@ -5852,7 +5852,7 @@
}
static u8 reg_r(struct gspca_dev *gspca_dev,
- __u16 index)
+ u16 index)
{
u8 ret;
@@ -5862,8 +5862,8 @@
}
static void reg_w_i(struct usb_device *dev,
- __u8 value,
- __u16 index)
+ u8 value,
+ u16 index)
{
usb_control_msg(dev,
usb_sndctrlpipe(dev, 0),
@@ -5874,18 +5874,18 @@
}
static void reg_w(struct usb_device *dev,
- __u8 value,
- __u16 index)
+ u8 value,
+ u16 index)
{
PDEBUG(D_USBO, "reg w [%04x] = %02x", index, value);
reg_w_i(dev, value, index);
}
-static __u16 i2c_read(struct gspca_dev *gspca_dev,
- __u8 reg)
+static u16 i2c_read(struct gspca_dev *gspca_dev,
+ u8 reg)
{
- __u8 retbyte;
- __u16 retval;
+ u8 retbyte;
+ u16 retval;
reg_w_i(gspca_dev->dev, reg, 0x0092);
reg_w_i(gspca_dev->dev, 0x02, 0x0090); /* <- read command */
@@ -5900,12 +5900,12 @@
return retval;
}
-static __u8 i2c_write(struct gspca_dev *gspca_dev,
- __u8 reg,
- __u8 valL,
- __u8 valH)
+static u8 i2c_write(struct gspca_dev *gspca_dev,
+ u8 reg,
+ u8 valL,
+ u8 valH)
{
- __u8 retbyte;
+ u8 retbyte;
reg_w_i(gspca_dev->dev, reg, 0x92);
reg_w_i(gspca_dev->dev, valL, 0x93);
@@ -5957,24 +5957,24 @@
{
struct sd *sd = (struct sd *) gspca_dev;
int i;
- const __u8 *matrix;
+ const u8 *matrix;
static const u8 adcm2700_matrix[9] =
/* {0x66, 0xed, 0xed, 0xed, 0x66, 0xed, 0xed, 0xed, 0x66}; */
/*ms-win*/
{0x74, 0xed, 0xed, 0xed, 0x74, 0xed, 0xed, 0xed, 0x74};
- static const __u8 gc0305_matrix[9] =
+ static const u8 gc0305_matrix[9] =
{0x50, 0xf8, 0xf8, 0xf8, 0x50, 0xf8, 0xf8, 0xf8, 0x50};
- static const __u8 ov7620_matrix[9] =
+ static const u8 ov7620_matrix[9] =
{0x58, 0xf4, 0xf4, 0xf4, 0x58, 0xf4, 0xf4, 0xf4, 0x58};
- static const __u8 pas202b_matrix[9] =
+ static const u8 pas202b_matrix[9] =
{0x4c, 0xf5, 0xff, 0xf9, 0x51, 0xf5, 0xfb, 0xed, 0x5f};
- static const __u8 po2030_matrix[9] =
+ static const u8 po2030_matrix[9] =
{0x60, 0xf0, 0xf0, 0xf0, 0x60, 0xf0, 0xf0, 0xf0, 0x60};
static const u8 tas5130c_matrix[9] =
{0x68, 0xec, 0xec, 0xec, 0x68, 0xec, 0xec, 0xec, 0x68};
- static const __u8 vf0250_matrix[9] =
+ static const u8 vf0250_matrix[9] =
{0x7b, 0xea, 0xea, 0xea, 0x7b, 0xea, 0xea, 0xea, 0x7b};
- static const __u8 *matrix_tb[SENSOR_MAX] = {
+ static const u8 *matrix_tb[SENSOR_MAX] = {
adcm2700_matrix, /* SENSOR_ADCM2700 0 */
ov7620_matrix, /* SENSOR_CS2102 1 */
NULL, /* SENSOR_CS2102K 2 */
@@ -6006,11 +6006,12 @@
static void setbrightness(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
- __u8 brightness;
+ u8 brightness;
switch (sd->sensor) {
case SENSOR_GC0305:
case SENSOR_OV7620:
+ case SENSOR_PAS202B:
case SENSOR_PO2030:
return;
}
@@ -6034,7 +6035,7 @@
struct sd *sd = (struct sd *) gspca_dev;
struct usb_device *dev = gspca_dev->dev;
int sharpness;
- static const __u8 sharpness_tb[][2] = {
+ static const u8 sharpness_tb[][2] = {
{0x02, 0x03},
{0x04, 0x07},
{0x08, 0x0f},
@@ -6053,118 +6054,69 @@
{
struct sd *sd = (struct sd *) gspca_dev;
struct usb_device *dev = gspca_dev->dev;
- const __u8 *Tgamma, *Tgradient;
- int g, i, k;
- static const __u8 kgamma_tb[16] = /* delta for contrast */
+ const u8 *Tgamma;
+ int g, i, k, adj, gp;
+ u8 gr[16];
+ static const u8 delta_tb[16] = /* delta for contrast */
{0x15, 0x0d, 0x0a, 0x09, 0x08, 0x08, 0x08, 0x08,
0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08};
- static const __u8 kgrad_tb[16] =
- {0x1b, 0x06, 0x03, 0x02, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x06, 0x04};
- static const __u8 Tgamma_1[16] =
+ static const u8 gamma_tb[6][16] = {
{0x00, 0x00, 0x03, 0x0d, 0x1b, 0x2e, 0x45, 0x5f,
- 0x79, 0x93, 0xab, 0xc1, 0xd4, 0xe5, 0xf3, 0xff};
- static const __u8 Tgradient_1[16] =
- {0x00, 0x01, 0x05, 0x0b, 0x10, 0x15, 0x18, 0x1a,
- 0x1a, 0x18, 0x16, 0x14, 0x12, 0x0f, 0x0d, 0x06};
- static const __u8 Tgamma_2[16] =
+ 0x79, 0x93, 0xab, 0xc1, 0xd4, 0xe5, 0xf3, 0xff},
{0x01, 0x0c, 0x1f, 0x3a, 0x53, 0x6d, 0x85, 0x9c,
- 0xb0, 0xc2, 0xd1, 0xde, 0xe9, 0xf2, 0xf9, 0xff};
- static const __u8 Tgradient_2[16] =
- {0x05, 0x0f, 0x16, 0x1a, 0x19, 0x19, 0x17, 0x15,
- 0x12, 0x10, 0x0e, 0x0b, 0x09, 0x08, 0x06, 0x03};
- static const __u8 Tgamma_3[16] =
+ 0xb0, 0xc2, 0xd1, 0xde, 0xe9, 0xf2, 0xf9, 0xff},
{0x04, 0x16, 0x30, 0x4e, 0x68, 0x81, 0x98, 0xac,
- 0xbe, 0xcd, 0xda, 0xe4, 0xed, 0xf5, 0xfb, 0xff};
- static const __u8 Tgradient_3[16] =
- {0x0c, 0x16, 0x1b, 0x1c, 0x19, 0x18, 0x15, 0x12,
- 0x10, 0x0d, 0x0b, 0x09, 0x08, 0x06, 0x05, 0x03};
- static const __u8 Tgamma_4[16] =
+ 0xbe, 0xcd, 0xda, 0xe4, 0xed, 0xf5, 0xfb, 0xff},
{0x13, 0x38, 0x59, 0x79, 0x92, 0xa7, 0xb9, 0xc8,
- 0xd4, 0xdf, 0xe7, 0xee, 0xf4, 0xf9, 0xfc, 0xff};
- static const __u8 Tgradient_4[16] =
- {0x26, 0x22, 0x20, 0x1c, 0x16, 0x13, 0x10, 0x0d,
- 0x0b, 0x09, 0x07, 0x06, 0x05, 0x04, 0x03, 0x02};
- static const __u8 Tgamma_5[16] =
+ 0xd4, 0xdf, 0xe7, 0xee, 0xf4, 0xf9, 0xfc, 0xff},
{0x20, 0x4b, 0x6e, 0x8d, 0xa3, 0xb5, 0xc5, 0xd2,
- 0xdc, 0xe5, 0xec, 0xf2, 0xf6, 0xfa, 0xfd, 0xff};
- static const __u8 Tgradient_5[16] =
- {0x37, 0x26, 0x20, 0x1a, 0x14, 0x10, 0x0e, 0x0b,
- 0x09, 0x07, 0x06, 0x05, 0x04, 0x03, 0x02, 0x02};
- static const __u8 Tgamma_6[16] = /* ?? was gamma 5 */
+ 0xdc, 0xe5, 0xec, 0xf2, 0xf6, 0xfa, 0xfd, 0xff},
{0x24, 0x44, 0x64, 0x84, 0x9d, 0xb2, 0xc4, 0xd3,
- 0xe0, 0xeb, 0xf4, 0xff, 0xff, 0xff, 0xff, 0xff};
- static const __u8 Tgradient_6[16] =
- {0x18, 0x20, 0x20, 0x1c, 0x16, 0x13, 0x10, 0x0e,
- 0x0b, 0x09, 0x07, 0x00, 0x00, 0x00, 0x00, 0x01};
- static const __u8 *gamma_tb[] = {
- NULL, Tgamma_1, Tgamma_2,
- Tgamma_3, Tgamma_4, Tgamma_5, Tgamma_6
+ 0xe0, 0xeb, 0xf4, 0xff, 0xff, 0xff, 0xff, 0xff},
};
- static const __u8 *gradient_tb[] = {
- NULL, Tgradient_1, Tgradient_2,
- Tgradient_3, Tgradient_4, Tgradient_5, Tgradient_6
- };
-#ifdef GSPCA_DEBUG
- __u8 v[16];
-#endif
- Tgamma = gamma_tb[sd->gamma];
- Tgradient = gradient_tb[sd->gamma];
+ Tgamma = gamma_tb[sd->gamma - 1];
- k = (sd->contrast - 128) /* -128 / 128 */
- * Tgamma[0];
- PDEBUG(D_CONF, "gamma:%d contrast:%d gamma coeff: %d/128",
- sd->gamma, sd->contrast, k);
+ k = ((int) sd->contrast - 128); /* -128 / 128 */
+ adj = 0;
+ gp = 0;
for (i = 0; i < 16; i++) {
- g = Tgamma[i] + kgamma_tb[i] * k / 128;
+ g = Tgamma[i] - delta_tb[i] * k / 128 - adj / 2;
if (g > 0xff)
g = 0xff;
else if (g <= 0)
g = 1;
reg_w(dev, g, 0x0120 + i); /* gamma */
-#ifdef GSPCA_DEBUG
- if (gspca_debug & D_CONF)
- v[i] = g;
-#endif
- }
- PDEBUG(D_CONF, "tb: %02x %02x %02x %02x %02x %02x %02x %02x",
- v[0], v[1], v[2], v[3], v[4], v[5], v[6], v[7]);
- PDEBUG(D_CONF, " %02x %02x %02x %02x %02x %02x %02x %02x",
- v[8], v[9], v[10], v[11], v[12], v[13], v[14], v[15]);
- for (i = 0; i < 16; i++) {
- g = Tgradient[i] - kgrad_tb[i] * k / 128;
- if (g > 0xff)
- g = 0xff;
- else if (g <= 0) {
- if (i != 15)
- g = 0;
+ if (k > 0)
+ adj--;
+ else
+ adj++;
+
+ if (i != 0) {
+ if (gp == 0)
+ gr[i - 1] = 0;
else
- g = 1;
+ gr[i - 1] = g - gp;
}
- reg_w(dev, g, 0x0130 + i); /* gradient */
-#ifdef GSPCA_DEBUG
- if (gspca_debug & D_CONF)
- v[i] = g;
-#endif
+ gp = g;
}
- PDEBUG(D_CONF, " %02x %02x %02x %02x %02x %02x %02x %02x",
- v[0], v[1], v[2], v[3], v[4], v[5], v[6], v[7]);
- PDEBUG(D_CONF, " %02x %02x %02x %02x %02x %02x %02x %02x",
- v[8], v[9], v[10], v[11], v[12], v[13], v[14], v[15]);
+ gr[15] = gr[14] / 2;
+ for (i = 0; i < 16; i++)
+ reg_w(dev, gr[i], 0x0130 + i); /* gradient */
}
static void setquality(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
struct usb_device *dev = gspca_dev->dev;
- __u8 frxt;
+ u8 frxt;
switch (sd->sensor) {
case SENSOR_ADCM2700:
case SENSOR_GC0305:
case SENSOR_HV7131B:
case SENSOR_OV7620:
+ case SENSOR_PAS202B:
case SENSOR_PO2030:
return;
}
@@ -6218,9 +6170,9 @@
hdcs2020b_50HZ, hdcs2020b_50HZ,
hdcs2020b_60HZ, hdcs2020b_60HZ},
/* SENSOR_HV7131B 5 */
- {hv7131b_NoFlikerScale, hv7131b_NoFliker,
- hv7131b_50HZScale, hv7131b_50HZ,
- hv7131b_60HZScale, hv7131b_60HZ},
+ {hv7131b_NoFliker, hv7131b_NoFlikerScale,
+ hv7131b_50HZ, hv7131b_50HZScale,
+ hv7131b_60HZ, hv7131b_60HZScale},
/* SENSOR_HV7131C 6 */
{NULL, NULL,
NULL, NULL,
@@ -6230,17 +6182,17 @@
icm105a_50HZ, icm105a_50HZScale,
icm105a_60HZ, icm105a_60HZScale},
/* SENSOR_MC501CB 8 */
- {MC501CB_NoFliker, MC501CB_NoFlikerScale,
- MC501CB_50HZ, MC501CB_50HZScale,
- MC501CB_60HZ, MC501CB_60HZScale},
+ {mc501cb_NoFliker, mc501cb_NoFlikerScale,
+ mc501cb_50HZ, mc501cb_50HZScale,
+ mc501cb_60HZ, mc501cb_60HZScale},
/* SENSOR_MI0360SOC 9 */
- {mi360soc_AENoFlikerScale, mi360soc_AENoFliker,
- mi360soc_AE50HZScale, mi360soc_AE50HZ,
- mi360soc_AE60HZScale, mi360soc_AE60HZ},
+ {mi360soc_AENoFliker, mi360soc_AENoFlikerScale,
+ mi360soc_AE50HZ, mi360soc_AE50HZScale,
+ mi360soc_AE60HZ, mi360soc_AE60HZScale},
/* SENSOR_OV7620 10 */
- {OV7620_NoFliker, OV7620_NoFliker,
- OV7620_50HZ, OV7620_50HZ,
- OV7620_60HZ, OV7620_60HZ},
+ {ov7620_NoFliker, ov7620_NoFliker,
+ ov7620_50HZ, ov7620_50HZ,
+ ov7620_60HZ, ov7620_60HZ},
/* SENSOR_OV7630C 11 */
{NULL, NULL,
NULL, NULL,
@@ -6258,17 +6210,17 @@
pb0330_50HZScale, pb0330_50HZ,
pb0330_60HZScale, pb0330_60HZ},
/* SENSOR_PO2030 15 */
- {PO2030_NoFliker, PO2030_NoFliker,
- PO2030_50HZ, PO2030_50HZ,
- PO2030_60HZ, PO2030_60HZ},
+ {po2030_NoFliker, po2030_NoFliker,
+ po2030_50HZ, po2030_50HZ,
+ po2030_60HZ, po2030_60HZ},
/* SENSOR_TAS5130CK 16 */
- {tas5130cxx_NoFlikerScale, tas5130cxx_NoFliker,
- tas5130cxx_50HZScale, tas5130cxx_50HZ,
- tas5130cxx_60HZScale, tas5130cxx_60HZ},
+ {tas5130cxx_NoFliker, tas5130cxx_NoFlikerScale,
+ tas5130cxx_50HZ, tas5130cxx_50HZScale,
+ tas5130cxx_60HZ, tas5130cxx_60HZScale},
/* SENSOR_TAS5130CXX 17 */
- {tas5130cxx_NoFlikerScale, tas5130cxx_NoFliker,
- tas5130cxx_50HZScale, tas5130cxx_50HZ,
- tas5130cxx_60HZScale, tas5130cxx_60HZ},
+ {tas5130cxx_NoFliker, tas5130cxx_NoFlikerScale,
+ tas5130cxx_50HZ, tas5130cxx_50HZScale,
+ tas5130cxx_60HZ, tas5130cxx_60HZScale},
/* SENSOR_TAS5130C_VF0250 18 */
{tas5130c_vf0250_NoFliker, tas5130c_vf0250_NoFlikerScale,
tas5130c_vf0250_50HZ, tas5130c_vf0250_50HZScale,
@@ -6277,9 +6229,9 @@
i = sd->lightfreq * 2;
mode = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv;
- if (!mode)
- i++; /* 640x480 */
- zc3_freq = freq_tb[(int) sd->sensor][i];
+ if (mode)
+ i++; /* 320x240 */
+ zc3_freq = freq_tb[sd->sensor][i];
if (zc3_freq != NULL) {
usb_exchange(gspca_dev, zc3_freq);
switch (sd->sensor) {
@@ -6297,6 +6249,9 @@
reg_w(gspca_dev->dev, 0x44, 0x0002);
}
break;
+ case SENSOR_PAS202B:
+ reg_w(gspca_dev->dev, 0x00, 0x01a7);
+ break;
}
}
return 0;
@@ -6305,7 +6260,7 @@
static void setautogain(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
- __u8 autoval;
+ u8 autoval;
if (sd->autogain)
autoval = 0x42;
@@ -6333,6 +6288,12 @@
reg_w(dev, 0x02, 0x003b);
reg_w(dev, 0x00, 0x0038);
break;
+ case SENSOR_PAS202B:
+ reg_w(dev, 0x03, 0x003b);
+ reg_w(dev, 0x0c, 0x003a);
+ reg_w(dev, 0x0b, 0x0039);
+ reg_w(dev, 0x0b, 0x0038);
+ break;
}
}
@@ -6349,7 +6310,7 @@
static int sif_probe(struct gspca_dev *gspca_dev)
{
- __u16 checkword;
+ u16 checkword;
start_2wr_probe(gspca_dev->dev, 0x0f); /* PAS106 */
reg_w(gspca_dev->dev, 0x08, 0x008d);
@@ -6392,6 +6353,7 @@
}
start_2wr_probe(dev, 0x08); /* HDCS2020 */
+ i2c_write(gspca_dev, 0x1c, 0x00, 0x00);
i2c_write(gspca_dev, 0x15, 0xaa, 0x00);
retword = i2c_read(gspca_dev, 0x15);
if (retword != 0)
@@ -6420,8 +6382,10 @@
i2c_write(gspca_dev, 0x03, 0xaa, 0x00);
msleep(50);
retword = i2c_read(gspca_dev, 0x03);
- if (retword != 0)
+ if (retword != 0) {
+ send_unknown(dev, SENSOR_PAS202B);
return 0x0e; /* PAS202BCB */
+ }
start_2wr_probe(dev, 0x02); /* TAS5130C */
i2c_write(gspca_dev, 0x01, 0xaa, 0x00);
@@ -6457,8 +6421,8 @@
}
struct sensor_by_chipset_revision {
- __u16 revision;
- __u8 internal_sensor_id;
+ u16 revision;
+ u8 internal_sensor_id;
};
static const struct sensor_by_chipset_revision chipset_revision_sensor[] = {
{0xc000, 0x12}, /* TAS5130C */
@@ -6467,6 +6431,7 @@
{0x8001, 0x13},
{0x8000, 0x14}, /* CS2102K */
{0x8400, 0x15}, /* TAS5130K */
+ {0xe400, 0x15},
};
static int vga_3wr_probe(struct gspca_dev *gspca_dev)
@@ -6474,7 +6439,7 @@
struct sd *sd = (struct sd *) gspca_dev;
struct usb_device *dev = gspca_dev->dev;
int i;
- __u8 retbyte;
+ u8 retbyte;
u16 retword;
/*fixme: lack of 8b=b3 (11,12)-> 10, 8b=e0 (14,15,16)-> 12 found in gspcav1*/
@@ -6622,8 +6587,7 @@
struct sd *sd = (struct sd *) gspca_dev;
struct cam *cam;
int sensor;
- int vga = 1; /* 1: vga, 0: sif */
- static const __u8 gamma[SENSOR_MAX] = {
+ static const u8 gamma[SENSOR_MAX] = {
4, /* SENSOR_ADCM2700 0 */
4, /* SENSOR_CS2102 1 */
5, /* SENSOR_CS2102K 2 */
@@ -6644,9 +6608,30 @@
3, /* SENSOR_TAS5130CXX 17 */
3, /* SENSOR_TAS5130C_VF0250 18 */
};
+ static const u8 mode_tb[SENSOR_MAX] = {
+ 2, /* SENSOR_ADCM2700 0 */
+ 1, /* SENSOR_CS2102 1 */
+ 1, /* SENSOR_CS2102K 2 */
+ 1, /* SENSOR_GC0305 3 */
+ 1, /* SENSOR_HDCS2020b 4 */
+ 1, /* SENSOR_HV7131B 5 */
+ 1, /* SENSOR_HV7131C 6 */
+ 1, /* SENSOR_ICM105A 7 */
+ 2, /* SENSOR_MC501CB 8 */
+ 1, /* SENSOR_MI0360SOC 9 */
+ 2, /* SENSOR_OV7620 10 */
+ 1, /* SENSOR_OV7630C 11 */
+ 0, /* SENSOR_PAS106 12 */
+ 1, /* SENSOR_PAS202B 13 */
+ 1, /* SENSOR_PB0330 14 */
+ 1, /* SENSOR_PO2030 15 */
+ 1, /* SENSOR_TAS5130CK 16 */
+ 1, /* SENSOR_TAS5130CXX 17 */
+ 1, /* SENSOR_TAS5130C_VF0250 18 */
+ };
/* define some sensors from the vendor/product */
- sd->sharpness = 2;
+ sd->sharpness = SHARPNESS_DEF;
sd->sensor = id->driver_info;
sensor = zcxx_probeSensor(gspca_dev);
if (sensor >= 0)
@@ -6671,8 +6656,21 @@
}
break;
case 0:
- PDEBUG(D_PROBE, "Find Sensor HV7131B");
- sd->sensor = SENSOR_HV7131B;
+ /* check the sensor type */
+ sensor = i2c_read(gspca_dev, 0x00);
+ PDEBUG(D_PROBE, "Sensor hv7131 type %d", sensor);
+ switch (sensor) {
+ case 0: /* hv7131b */
+ case 1: /* hv7131e */
+ PDEBUG(D_PROBE, "Find Sensor HV7131B");
+ sd->sensor = SENSOR_HV7131B;
+ break;
+ default:
+/* case 2: * hv7131r */
+ PDEBUG(D_PROBE, "Find Sensor HV7131R(c)");
+ sd->sensor = SENSOR_HV7131C;
+ break;
+ }
break;
case 0x02:
PDEBUG(D_PROBE, "Sensor TAS5130C");
@@ -6699,12 +6697,11 @@
case 0x0e:
PDEBUG(D_PROBE, "Find Sensor PAS202B");
sd->sensor = SENSOR_PAS202B;
- sd->sharpness = 1;
+/* sd->sharpness = 1; */
break;
case 0x0f:
PDEBUG(D_PROBE, "Find Sensor PAS106");
sd->sensor = SENSOR_PAS106;
- vga = 0; /* SIF */
break;
case 0x10:
case 0x12:
@@ -6770,31 +6767,38 @@
if (sensor < 0x20) {
if (sensor == -1 || sensor == 0x10 || sensor == 0x12)
reg_w(gspca_dev->dev, 0x02, 0x0010);
- else
- reg_w(gspca_dev->dev, sensor & 0x0f, 0x0010);
reg_r(gspca_dev, 0x0010);
}
cam = &gspca_dev->cam;
/*fixme:test*/
gspca_dev->nbalt--;
- if (vga) {
- cam->cam_mode = vga_mode;
- cam->nmodes = ARRAY_SIZE(vga_mode);
- } else {
+ switch (mode_tb[sd->sensor]) {
+ case 0:
cam->cam_mode = sif_mode;
cam->nmodes = ARRAY_SIZE(sif_mode);
+ break;
+ case 1:
+ cam->cam_mode = vga_mode;
+ cam->nmodes = ARRAY_SIZE(vga_mode);
+ break;
+ default:
+/* case 2: */
+ cam->cam_mode = broken_vga_mode;
+ cam->nmodes = ARRAY_SIZE(broken_vga_mode);
+ break;
}
- sd->brightness = sd_ctrls[SD_BRIGHTNESS].qctrl.default_value;
- sd->contrast = sd_ctrls[SD_CONTRAST].qctrl.default_value;
- sd->gamma = gamma[(int) sd->sensor];
- sd->autogain = sd_ctrls[SD_AUTOGAIN].qctrl.default_value;
- sd->lightfreq = sd_ctrls[SD_FREQ].qctrl.default_value;
+ sd->brightness = BRIGHTNESS_DEF;
+ sd->contrast = CONTRAST_DEF;
+ sd->gamma = gamma[sd->sensor];
+ sd->autogain = AUTOGAIN_DEF;
+ sd->lightfreq = FREQ_DEF;
sd->quality = QUALITY_DEF;
switch (sd->sensor) {
case SENSOR_GC0305:
case SENSOR_OV7620:
+ case SENSOR_PAS202B:
case SENSOR_PO2030:
gspca_dev->ctrl_dis = (1 << BRIGHTNESS_IDX);
break;
@@ -6805,14 +6809,13 @@
break;
}
- /* switch the led off */
- reg_w(gspca_dev->dev, 0x01, 0x0000);
return 0;
}
/* this function is called at probe and resume time */
static int sd_init(struct gspca_dev *gspca_dev)
{
+ /* switch off the led */
reg_w(gspca_dev->dev, 0x01, 0x0000);
return 0;
}
@@ -6821,28 +6824,27 @@
{
struct sd *sd = (struct sd *) gspca_dev;
struct usb_device *dev = gspca_dev->dev;
- const struct usb_action *zc3_init;
int mode;
static const struct usb_action *init_tb[SENSOR_MAX][2] = {
{adcm2700_Initial, adcm2700_InitialScale}, /* 0 */
- {cs2102_InitialScale, cs2102_Initial}, /* 1 */
- {cs2102K_InitialScale, cs2102K_Initial}, /* 2 */
+ {cs2102_Initial, cs2102_InitialScale}, /* 1 */
+ {cs2102K_Initial, cs2102K_InitialScale}, /* 2 */
{gc0305_Initial, gc0305_InitialScale}, /* 3 */
- {hdcs2020xb_InitialScale, hdcs2020xb_Initial}, /* 4 */
- {hv7131bxx_InitialScale, hv7131bxx_Initial}, /* 5 */
- {hv7131cxx_InitialScale, hv7131cxx_Initial}, /* 6 */
- {icm105axx_InitialScale, icm105axx_Initial}, /* 7 */
- {MC501CB_InitialScale, MC501CB_Initial}, /* 8 */
+ {hdcs2020b_Initial, hdcs2020b_InitialScale}, /* 4 */
+ {hv7131b_Initial, hv7131b_InitialScale}, /* 5 */
+ {hv7131r_Initial, hv7131r_InitialScale}, /* 6 */
+ {icm105a_Initial, icm105a_InitialScale}, /* 7 */
+ {mc501cb_Initial, mc501cb_InitialScale}, /* 8 */
{mi0360soc_Initial, mi0360soc_InitialScale}, /* 9 */
- {OV7620_mode0, OV7620_mode1}, /* 10 */
- {ov7630c_InitialScale, ov7630c_Initial}, /* 11 */
- {pas106b_InitialScale, pas106b_Initial}, /* 12 */
+ {ov7620_Initial, ov7620_InitialScale}, /* 10 */
+ {ov7630c_Initial, ov7630c_InitialScale}, /* 11 */
+ {pas106b_Initial, pas106b_InitialScale}, /* 12 */
{pas202b_Initial, pas202b_InitialScale}, /* 13 */
{pb0330_Initial, pb0330_InitialScale}, /* 14 */
- {PO2030_mode0, PO2030_mode1}, /* 15 */
- {tas5130CK_InitialScale, tas5130CK_Initial}, /* 16 */
+ {po2030_Initial, po2030_InitialScale}, /* 15 */
+ {tas5130cK_Initial, tas5130cK_InitialScale}, /* 16 */
{tas5130cxx_Initial, tas5130cxx_InitialScale}, /* 17 */
- {tas5130c_vf0250_InitialScale, tas5130c_vf0250_Initial},
+ {tas5130c_vf0250_Initial, tas5130c_vf0250_InitialScale},
/* 18 */
};
@@ -6854,8 +6856,7 @@
0x21); /* JPEG 422 */
jpeg_set_qual(sd->jpeg_hdr, sd->quality);
- mode = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv;
- zc3_init = init_tb[(int) sd->sensor][mode];
+ mode = gspca_dev->cam.cam_mode[gspca_dev->curr_mode].priv;
switch (sd->sensor) {
case SENSOR_HV7131C:
zcxx_probeSensor(gspca_dev);
@@ -6864,7 +6865,7 @@
usb_exchange(gspca_dev, pas106b_Initial_com);
break;
}
- usb_exchange(gspca_dev, zc3_init);
+ usb_exchange(gspca_dev, init_tb[sd->sensor][mode]);
switch (sd->sensor) {
case SENSOR_ADCM2700:
@@ -6883,6 +6884,11 @@
reg_w(dev, 0x02, 0x003b);
reg_w(dev, 0x00, 0x0038);
break;
+ case SENSOR_PAS202B:
+ reg_w(dev, 0x03, 0x003b);
+ reg_w(dev, 0x0c, 0x003a);
+ reg_w(dev, 0x0b, 0x0039);
+ break;
}
setmatrix(gspca_dev);
@@ -6961,13 +6967,13 @@
switch (sd->sensor) {
case SENSOR_PO2030:
msleep(50);
- reg_r(gspca_dev, 0x0008);
- reg_r(gspca_dev, 0x0007);
- /*fall thru*/
- case SENSOR_PAS202B:
reg_w(dev, 0x00, 0x0007); /* (from win traces) */
reg_w(dev, 0x02, ZC3XX_R008_CLOCKSETTING);
break;
+ case SENSOR_PAS202B:
+ reg_w(dev, 0x32, 0x0007); /* (from win traces) */
+ reg_w(dev, 0x02, ZC3XX_R008_CLOCKSETTING);
+ break;
}
return 0;
}
@@ -7165,6 +7171,22 @@
return 0;
}
+#ifdef CONFIG_INPUT
+static int sd_int_pkt_scan(struct gspca_dev *gspca_dev,
+ u8 *data, /* interrupt packet data */
+ int len) /* interrput packet length */
+{
+ if (len == 8 && data[4] == 1) {
+ input_report_key(gspca_dev->input_dev, KEY_CAMERA, 1);
+ input_sync(gspca_dev->input_dev);
+ input_report_key(gspca_dev->input_dev, KEY_CAMERA, 0);
+ input_sync(gspca_dev->input_dev);
+ }
+
+ return 0;
+}
+#endif
+
static const struct sd_desc sd_desc = {
.name = MODULE_NAME,
.ctrls = sd_ctrls,
@@ -7177,6 +7199,9 @@
.querymenu = sd_querymenu,
.get_jcomp = sd_get_jcomp,
.set_jcomp = sd_set_jcomp,
+#ifdef CONFIG_INPUT
+ .int_pkt_scan = sd_int_pkt_scan,
+#endif
};
static const __devinitdata struct usb_device_id device_table[] = {
diff --git a/drivers/media/video/hdpvr/hdpvr-core.c b/drivers/media/video/hdpvr/hdpvr-core.c
index 51f393d..2fc9865 100644
--- a/drivers/media/video/hdpvr/hdpvr-core.c
+++ b/drivers/media/video/hdpvr/hdpvr-core.c
@@ -39,12 +39,12 @@
module_param(hdpvr_debug, int, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(hdpvr_debug, "enable debugging output");
-uint default_video_input = HDPVR_VIDEO_INPUTS;
+static uint default_video_input = HDPVR_VIDEO_INPUTS;
module_param(default_video_input, uint, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(default_video_input, "default video input: 0=Component / "
"1=S-Video / 2=Composite");
-uint default_audio_input = HDPVR_AUDIO_INPUTS;
+static uint default_audio_input = HDPVR_AUDIO_INPUTS;
module_param(default_audio_input, uint, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(default_audio_input, "default audio input: 0=RCA back / "
"1=RCA front / 2=S/PDIF");
@@ -59,6 +59,7 @@
{ USB_DEVICE(HD_PVR_VENDOR_ID, HD_PVR_PRODUCT_ID) },
{ USB_DEVICE(HD_PVR_VENDOR_ID, HD_PVR_PRODUCT_ID1) },
{ USB_DEVICE(HD_PVR_VENDOR_ID, HD_PVR_PRODUCT_ID2) },
+ { USB_DEVICE(HD_PVR_VENDOR_ID, HD_PVR_PRODUCT_ID3) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, hdpvr_table);
diff --git a/drivers/media/video/hdpvr/hdpvr-video.c b/drivers/media/video/hdpvr/hdpvr-video.c
index fdd7820..196f82d 100644
--- a/drivers/media/video/hdpvr/hdpvr-video.c
+++ b/drivers/media/video/hdpvr/hdpvr-video.c
@@ -302,7 +302,8 @@
/* function expects dev->io_mutex to be hold by caller */
static int hdpvr_stop_streaming(struct hdpvr_device *dev)
{
- uint actual_length, c = 0;
+ int actual_length;
+ uint c = 0;
u8 *buf;
if (dev->status == STATUS_IDLE)
@@ -572,7 +573,7 @@
struct hdpvr_device *dev = video_drvdata(file);
strcpy(cap->driver, "hdpvr");
- strcpy(cap->card, "Haupauge HD PVR");
+ strcpy(cap->card, "Hauppauge HD PVR");
usb_make_path(dev->udev, cap->bus_info, sizeof(cap->bus_info));
cap->version = HDPVR_VERSION;
cap->capabilities = V4L2_CAP_VIDEO_CAPTURE |
diff --git a/drivers/media/video/hdpvr/hdpvr.h b/drivers/media/video/hdpvr/hdpvr.h
index 1edd875..49ae25d 100644
--- a/drivers/media/video/hdpvr/hdpvr.h
+++ b/drivers/media/video/hdpvr/hdpvr.h
@@ -30,6 +30,7 @@
#define HD_PVR_PRODUCT_ID 0x4900
#define HD_PVR_PRODUCT_ID1 0x4901
#define HD_PVR_PRODUCT_ID2 0x4902
+#define HD_PVR_PRODUCT_ID3 0x4982
#define UNSET (-1U)
diff --git a/drivers/media/video/hexium_gemini.c b/drivers/media/video/hexium_gemini.c
index 60d992e..e620a3a 100644
--- a/drivers/media/video/hexium_gemini.c
+++ b/drivers/media/video/hexium_gemini.c
@@ -352,9 +352,13 @@
static int hexium_attach(struct saa7146_dev *dev, struct saa7146_pci_extension_data *info)
{
struct hexium *hexium = (struct hexium *) dev->ext_priv;
+ int ret;
DEB_EE((".\n"));
+ ret = saa7146_vv_devinit(dev);
+ if (ret)
+ return ret;
hexium = kzalloc(sizeof(struct hexium), GFP_KERNEL);
if (NULL == hexium) {
printk("hexium_gemini: not enough kernel memory in hexium_attach().\n");
@@ -400,9 +404,10 @@
vv_data.ops.vidioc_enum_input = vidioc_enum_input;
vv_data.ops.vidioc_g_input = vidioc_g_input;
vv_data.ops.vidioc_s_input = vidioc_s_input;
- if (0 != saa7146_register_device(&hexium->video_dev, dev, "hexium gemini", VFL_TYPE_GRABBER)) {
+ ret = saa7146_register_device(&hexium->video_dev, dev, "hexium gemini", VFL_TYPE_GRABBER);
+ if (ret < 0) {
printk("hexium_gemini: cannot register capture v4l2 device. skipping.\n");
- return -1;
+ return ret;
}
printk("hexium_gemini: found 'hexium gemini' frame grabber-%d.\n", hexium_num);
diff --git a/drivers/media/video/hexium_orion.c b/drivers/media/video/hexium_orion.c
index 938a1f8..fe596a1 100644
--- a/drivers/media/video/hexium_orion.c
+++ b/drivers/media/video/hexium_orion.c
@@ -216,6 +216,10 @@
return -EFAULT;
}
+ err = saa7146_vv_devinit(dev);
+ if (err)
+ return err;
+
hexium = kzalloc(sizeof(struct hexium), GFP_KERNEL);
if (NULL == hexium) {
printk("hexium_orion: hexium_probe: not enough kernel memory.\n");
diff --git a/drivers/media/video/ir-kbd-i2c.c b/drivers/media/video/ir-kbd-i2c.c
index b86e353..da18d69 100644
--- a/drivers/media/video/ir-kbd-i2c.c
+++ b/drivers/media/video/ir-kbd-i2c.c
@@ -299,7 +299,7 @@
{
struct ir_scancode_table *ir_codes = NULL;
const char *name = NULL;
- int ir_type = 0;
+ u64 ir_type = 0;
struct IR_i2c *ir;
struct input_dev *input_dev;
struct i2c_adapter *adap = client->adapter;
@@ -331,6 +331,7 @@
ir_codes = &ir_codes_pv951_table;
break;
case 0x18:
+ case 0x1f:
case 0x1a:
name = "Hauppauge";
ir->get_key = get_key_haup;
@@ -446,7 +447,7 @@
input_dev->name = ir->name;
input_dev->phys = ir->phys;
- err = ir_input_register(ir->input, ir->ir_codes);
+ err = ir_input_register(ir->input, ir->ir_codes, NULL);
if (err)
goto err_out_free;
diff --git a/drivers/media/video/ivtv/ivtv-cards.c b/drivers/media/video/ivtv/ivtv-cards.c
index 79d0fe4..ca1fd32 100644
--- a/drivers/media/video/ivtv/ivtv-cards.c
+++ b/drivers/media/video/ivtv/ivtv-cards.c
@@ -1210,6 +1210,53 @@
.i2c = &ivtv_i2c_std,
};
+/* ------------------------------------------------------------------------- */
+/* Sony Kikyou */
+
+static const struct ivtv_card_pci_info ivtv_pci_kikyou[] = {
+ { PCI_DEVICE_ID_IVTV16, IVTV_PCI_ID_SONY, 0x813d },
+ { 0, 0, 0 }
+};
+
+static const struct ivtv_card ivtv_card_kikyou = {
+ .type = IVTV_CARD_KIKYOU,
+ .name = "Sony VAIO Giga Pocket (ENX Kikyou)",
+ .v4l2_capabilities = IVTV_CAP_ENCODER,
+ .hw_video = IVTV_HW_SAA7115,
+ .hw_audio = IVTV_HW_GPIO,
+ .hw_audio_ctrl = IVTV_HW_GPIO,
+ .hw_all = IVTV_HW_GPIO | IVTV_HW_SAA7115 | IVTV_HW_TUNER,
+ .video_inputs = {
+ { IVTV_CARD_INPUT_VID_TUNER, 0, IVTV_SAA71XX_COMPOSITE1 },
+ { IVTV_CARD_INPUT_COMPOSITE1, 1, IVTV_SAA71XX_COMPOSITE1 },
+ { IVTV_CARD_INPUT_SVIDEO1, 1, IVTV_SAA71XX_SVIDEO1 },
+ },
+ .audio_inputs = {
+ { IVTV_CARD_INPUT_AUD_TUNER, IVTV_GPIO_TUNER },
+ { IVTV_CARD_INPUT_LINE_IN1, IVTV_GPIO_LINE_IN },
+ { IVTV_CARD_INPUT_LINE_IN2, IVTV_GPIO_LINE_IN },
+ },
+ .gpio_init = { .direction = 0x03e1, .initial_value = 0x0320 },
+ .gpio_audio_input = { .mask = 0x0060,
+ .tuner = 0x0020,
+ .linein = 0x0000,
+ .radio = 0x0060 },
+ .gpio_audio_mute = { .mask = 0x0000,
+ .mute = 0x0000 }, /* 0x200? Disable for now. */
+ .gpio_audio_mode = { .mask = 0x0080,
+ .mono = 0x0000,
+ .stereo = 0x0000, /* SAP */
+ .lang1 = 0x0080,
+ .lang2 = 0x0000,
+ .both = 0x0080 },
+ .tuners = {
+ { .std = V4L2_STD_ALL, .tuner = TUNER_SONY_BTF_PXN01Z },
+ },
+ .pci_list = ivtv_pci_kikyou,
+ .i2c = &ivtv_i2c_std,
+};
+
+
static const struct ivtv_card *ivtv_card_list[] = {
&ivtv_card_pvr250,
&ivtv_card_pvr350,
@@ -1238,6 +1285,7 @@
&ivtv_card_aver_m104,
&ivtv_card_buffalo,
&ivtv_card_aver_ultra1500mce,
+ &ivtv_card_kikyou,
/* Variations of standard cards but with the same PCI IDs.
These cards must come last in this list. */
diff --git a/drivers/media/video/ivtv/ivtv-cards.h b/drivers/media/video/ivtv/ivtv-cards.h
index 6148827..78eca992 100644
--- a/drivers/media/video/ivtv/ivtv-cards.h
+++ b/drivers/media/video/ivtv/ivtv-cards.h
@@ -51,7 +51,8 @@
#define IVTV_CARD_AVER_M104 24 /* AverMedia M104 miniPCI card */
#define IVTV_CARD_BUFFALO_MV5L 25 /* Buffalo PC-MV5L/PCI card */
#define IVTV_CARD_AVER_ULTRA1500MCE 26 /* AVerMedia UltraTV 1500 MCE */
-#define IVTV_CARD_LAST 26
+#define IVTV_CARD_KIKYOU 27 /* Sony VAIO Giga Pocket (ENX Kikyou) */
+#define IVTV_CARD_LAST 27
/* Variants of existing cards but with the same PCI IDs. The driver
detects these based on other device information.
@@ -86,6 +87,7 @@
#define IVTV_PCI_ID_MELCO 0x1154
#define IVTV_PCI_ID_GOTVIEW1 0xffac
#define IVTV_PCI_ID_GOTVIEW2 0xffad
+#define IVTV_PCI_ID_SONY 0x104d
/* hardware flags, no gaps allowed */
#define IVTV_HW_CX25840 (1 << 0)
diff --git a/drivers/media/video/ivtv/ivtv-driver.c b/drivers/media/video/ivtv/ivtv-driver.c
index 347c334..9a25054 100644
--- a/drivers/media/video/ivtv/ivtv-driver.c
+++ b/drivers/media/video/ivtv/ivtv-driver.c
@@ -193,6 +193,7 @@
"\t\t\t25 = AverMedia M104 (not yet working)\n"
"\t\t\t26 = Buffalo PC-MV5L/PCI\n"
"\t\t\t27 = AVerMedia UltraTV 1500 MCE\n"
+ "\t\t\t28 = Sony VAIO Giga Pocket (ENX Kikyou)\n"
"\t\t\t 0 = Autodetect (default)\n"
"\t\t\t-1 = Ignore this card\n\t\t");
MODULE_PARM_DESC(pal, "Set PAL standard: BGH, DK, I, M, N, Nc, 60");
diff --git a/drivers/media/video/ivtv/ivtv-firmware.c b/drivers/media/video/ivtv/ivtv-firmware.c
index c1b7ec4..a71e8ba 100644
--- a/drivers/media/video/ivtv/ivtv-firmware.c
+++ b/drivers/media/video/ivtv/ivtv-firmware.c
@@ -258,7 +258,7 @@
IVTV_ERR("ivtv_init_mpeg_decoder failed to start playback\n");
return;
}
- ivtv_api_get_data(&itv->dec_mbox, IVTV_MBOX_DMA, data);
+ ivtv_api_get_data(&itv->dec_mbox, IVTV_MBOX_DMA, 2, data);
mem_offset = itv->dec_mem + data[1];
if ((readbytes = load_fw_direct(IVTV_DECODE_INIT_MPEG_FILENAME,
diff --git a/drivers/media/video/ivtv/ivtv-irq.c b/drivers/media/video/ivtv/ivtv-irq.c
index cd9db0b..12d36ca 100644
--- a/drivers/media/video/ivtv/ivtv-irq.c
+++ b/drivers/media/video/ivtv/ivtv-irq.c
@@ -562,7 +562,7 @@
u32 data[CX2341X_MBOX_MAX_DATA];
struct ivtv_stream *s;
- ivtv_api_get_data(&itv->enc_mbox, IVTV_MBOX_DMA_END, data);
+ ivtv_api_get_data(&itv->enc_mbox, IVTV_MBOX_DMA_END, 2, data);
IVTV_DEBUG_HI_IRQ("ENC DMA COMPLETE %x %d (%d)\n", data[0], data[1], itv->cur_dma_stream);
del_timer(&itv->dma_timer);
@@ -638,7 +638,7 @@
u32 data[CX2341X_MBOX_MAX_DATA];
del_timer(&itv->dma_timer);
- ivtv_api_get_data(&itv->enc_mbox, IVTV_MBOX_DMA_END, data);
+ ivtv_api_get_data(&itv->enc_mbox, IVTV_MBOX_DMA_END, 2, data);
IVTV_DEBUG_WARN("DMA ERROR %08x %08x %08x %d\n", data[0], data[1],
read_reg(IVTV_REG_DMASTATUS), itv->cur_dma_stream);
write_reg(read_reg(IVTV_REG_DMASTATUS) & 3, IVTV_REG_DMASTATUS);
@@ -669,7 +669,7 @@
struct ivtv_stream *s;
/* Get DMA destination and size arguments from card */
- ivtv_api_get_data(&itv->enc_mbox, IVTV_MBOX_DMA, data);
+ ivtv_api_get_data(&itv->enc_mbox, IVTV_MBOX_DMA, 7, data);
IVTV_DEBUG_HI_IRQ("ENC START CAP %d: %08x %08x\n", data[0], data[1], data[2]);
if (data[0] > 2 || data[1] == 0 || data[2] == 0) {
@@ -713,9 +713,9 @@
struct ivtv_stream *s;
/* YUV or MPG */
- ivtv_api_get_data(&itv->dec_mbox, IVTV_MBOX_DMA, data);
if (test_bit(IVTV_F_I_DEC_YUV, &itv->i_flags)) {
+ ivtv_api_get_data(&itv->dec_mbox, IVTV_MBOX_DMA, 2, data);
itv->dma_data_req_size =
1080 * ((itv->yuv_info.v4l2_src_h + 31) & ~31);
itv->dma_data_req_offset = data[1];
@@ -724,6 +724,7 @@
s = &itv->streams[IVTV_DEC_STREAM_TYPE_YUV];
}
else {
+ ivtv_api_get_data(&itv->dec_mbox, IVTV_MBOX_DMA, 3, data);
itv->dma_data_req_size = min_t(u32, data[2], 0x10000);
itv->dma_data_req_offset = data[1];
s = &itv->streams[IVTV_DEC_STREAM_TYPE_MPG];
@@ -940,9 +941,10 @@
ivtv_dma_enc_start(s);
break;
}
- if (i == IVTV_MAX_STREAMS && test_and_clear_bit(IVTV_F_I_UDMA_PENDING, &itv->i_flags)) {
+
+ if (i == IVTV_MAX_STREAMS &&
+ test_bit(IVTV_F_I_UDMA_PENDING, &itv->i_flags))
ivtv_udma_start(itv);
- }
}
if ((combo & IVTV_IRQ_DMA) && !test_bit(IVTV_F_I_PIO, &itv->i_flags)) {
diff --git a/drivers/media/video/ivtv/ivtv-mailbox.c b/drivers/media/video/ivtv/ivtv-mailbox.c
index 1b5c0ac..84577f6 100644
--- a/drivers/media/video/ivtv/ivtv-mailbox.c
+++ b/drivers/media/video/ivtv/ivtv-mailbox.c
@@ -369,10 +369,11 @@
}
/* This one is for stuff that can't sleep.. irq handlers, etc.. */
-void ivtv_api_get_data(struct ivtv_mailbox_data *mbdata, int mb, u32 data[])
+void ivtv_api_get_data(struct ivtv_mailbox_data *mbdata, int mb,
+ int argc, u32 data[])
{
+ volatile u32 __iomem *p = mbdata->mbox[mb].data;
int i;
-
- for (i = 0; i < CX2341X_MBOX_MAX_DATA; i++)
- data[i] = readl(&mbdata->mbox[mb].data[i]);
+ for (i = 0; i < argc; i++, p++)
+ data[i] = readl(p);
}
diff --git a/drivers/media/video/ivtv/ivtv-mailbox.h b/drivers/media/video/ivtv/ivtv-mailbox.h
index 6ef1209..8247662 100644
--- a/drivers/media/video/ivtv/ivtv-mailbox.h
+++ b/drivers/media/video/ivtv/ivtv-mailbox.h
@@ -24,7 +24,8 @@
#define IVTV_MBOX_DMA_END 8
#define IVTV_MBOX_DMA 9
-void ivtv_api_get_data(struct ivtv_mailbox_data *mbox, int mb, u32 data[]);
+void ivtv_api_get_data(struct ivtv_mailbox_data *mbdata, int mb,
+ int argc, u32 data[]);
int ivtv_api(struct ivtv *itv, int cmd, int args, u32 data[]);
int ivtv_vapi_result(struct ivtv *itv, u32 data[CX2341X_MBOX_MAX_DATA], int cmd, int args, ...);
int ivtv_vapi(struct ivtv *itv, int cmd, int args, ...);
diff --git a/drivers/media/video/ivtv/ivtv-streams.c b/drivers/media/video/ivtv/ivtv-streams.c
index e12c602..1f9387f 100644
--- a/drivers/media/video/ivtv/ivtv-streams.c
+++ b/drivers/media/video/ivtv/ivtv-streams.c
@@ -577,10 +577,14 @@
clear_bit(IVTV_F_I_EOS, &itv->i_flags);
/* Initialize Digitizer for Capture */
+ /* Avoid tinny audio problem - ensure audio clocks are going */
+ v4l2_subdev_call(itv->sd_audio, audio, s_stream, 1);
+ /* Avoid unpredictable PCI bus hang - disable video clocks */
v4l2_subdev_call(itv->sd_video, video, s_stream, 0);
- ivtv_msleep_timeout(300, 1);
+ ivtv_msleep_timeout(150, 1);
ivtv_vapi(itv, CX2341X_ENC_INITIALIZE_INPUT, 0);
v4l2_subdev_call(itv->sd_video, video, s_stream, 1);
+ ivtv_msleep_timeout(150, 1);
}
/* begin_capture */
diff --git a/drivers/media/video/ivtv/ivtv-udma.c b/drivers/media/video/ivtv/ivtv-udma.c
index d07ad6c..1daf1dd 100644
--- a/drivers/media/video/ivtv/ivtv-udma.c
+++ b/drivers/media/video/ivtv/ivtv-udma.c
@@ -213,6 +213,7 @@
write_reg_sync(read_reg(IVTV_REG_DMAXFER) | 0x01, IVTV_REG_DMAXFER);
set_bit(IVTV_F_I_DMA, &itv->i_flags);
set_bit(IVTV_F_I_UDMA, &itv->i_flags);
+ clear_bit(IVTV_F_I_UDMA_PENDING, &itv->i_flags);
}
void ivtv_udma_prepare(struct ivtv *itv)
diff --git a/drivers/media/video/mt9v022.c b/drivers/media/video/mt9v022.c
index 91df7ec..1a34d29 100644
--- a/drivers/media/video/mt9v022.c
+++ b/drivers/media/video/mt9v022.c
@@ -257,19 +257,18 @@
static unsigned long mt9v022_query_bus_param(struct soc_camera_device *icd)
{
struct soc_camera_link *icl = to_soc_camera_link(icd);
- unsigned int width_flag;
-
- if (icl->query_bus_param)
- width_flag = icl->query_bus_param(icl) &
- SOCAM_DATAWIDTH_MASK;
- else
- width_flag = SOCAM_DATAWIDTH_10;
-
- return SOCAM_PCLK_SAMPLE_RISING | SOCAM_PCLK_SAMPLE_FALLING |
+ unsigned int flags = SOCAM_MASTER | SOCAM_SLAVE |
+ SOCAM_PCLK_SAMPLE_RISING | SOCAM_PCLK_SAMPLE_FALLING |
SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_HSYNC_ACTIVE_LOW |
SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_LOW |
- SOCAM_DATA_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_SLAVE |
- width_flag;
+ SOCAM_DATA_ACTIVE_HIGH;
+
+ if (icl->query_bus_param)
+ flags |= icl->query_bus_param(icl) & SOCAM_DATAWIDTH_MASK;
+ else
+ flags |= SOCAM_DATAWIDTH_10;
+
+ return soc_camera_apply_sensor_flags(icl, flags);
}
static int mt9v022_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
diff --git a/drivers/media/video/mxb.c b/drivers/media/video/mxb.c
index c1fc6dc..9f01f14 100644
--- a/drivers/media/video/mxb.c
+++ b/drivers/media/video/mxb.c
@@ -169,7 +169,11 @@
static int mxb_probe(struct saa7146_dev *dev)
{
struct mxb *mxb = NULL;
+ int err;
+ err = saa7146_vv_devinit(dev);
+ if (err)
+ return err;
mxb = kzalloc(sizeof(struct mxb), GFP_KERNEL);
if (mxb == NULL) {
DEB_D(("not enough kernel memory.\n"));
@@ -294,7 +298,7 @@
/* select tuner-output on saa7111a */
i = 0;
saa7111a_call(mxb, video, s_routing, SAA7115_COMPOSITE0,
- SAA7111_FMT_CCIR | SAA7111_VBI_BYPASS, 0);
+ SAA7111_FMT_CCIR, 0);
/* select a tuner type */
tun_setup.mode_mask = T_ANALOG_TV;
@@ -518,8 +522,8 @@
return err;
/* switch video in saa7111a */
- if (saa7111a_call(mxb, video, s_routing, i, 0, 0))
- printk(KERN_ERR "VIDIOC_S_INPUT: could not address saa7111a #1.\n");
+ if (saa7111a_call(mxb, video, s_routing, i, SAA7111_FMT_CCIR, 0))
+ printk(KERN_ERR "VIDIOC_S_INPUT: could not address saa7111a.\n");
/* switch the audio-source only if necessary */
if (0 == mxb->cur_mute)
diff --git a/drivers/media/video/ov772x.c b/drivers/media/video/ov772x.c
index 3a45e94..7f8ece3 100644
--- a/drivers/media/video/ov772x.c
+++ b/drivers/media/video/ov772x.c
@@ -547,7 +547,6 @@
},
};
-
/*
* general function
*/
@@ -634,7 +633,12 @@
struct soc_camera_link *icl = to_soc_camera_link(icd);
unsigned long flags = SOCAM_PCLK_SAMPLE_RISING | SOCAM_MASTER |
SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_HSYNC_ACTIVE_HIGH |
- SOCAM_DATA_ACTIVE_HIGH | priv->info->buswidth;
+ SOCAM_DATA_ACTIVE_HIGH;
+
+ if (priv->info->flags & OV772X_FLAG_8BIT)
+ flags |= SOCAM_DATAWIDTH_8;
+ else
+ flags |= SOCAM_DATAWIDTH_10;
return soc_camera_apply_sensor_flags(icl, flags);
}
@@ -1040,15 +1044,6 @@
return -ENODEV;
/*
- * ov772x only use 8 or 10 bit bus width
- */
- if (SOCAM_DATAWIDTH_10 != priv->info->buswidth &&
- SOCAM_DATAWIDTH_8 != priv->info->buswidth) {
- dev_err(&client->dev, "bus width error\n");
- return -ENODEV;
- }
-
- /*
* check and show product ID and manufacturer ID
*/
pid = i2c_smbus_read_byte_data(client, PID);
@@ -1130,7 +1125,6 @@
const struct i2c_device_id *did)
{
struct ov772x_priv *priv;
- struct ov772x_camera_info *info;
struct soc_camera_device *icd = client->dev.platform_data;
struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
struct soc_camera_link *icl;
@@ -1145,8 +1139,6 @@
if (!icl || !icl->priv)
return -EINVAL;
- info = icl->priv;
-
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
dev_err(&adapter->dev,
"I2C-Adapter doesn't support "
@@ -1158,7 +1150,7 @@
if (!priv)
return -ENOMEM;
- priv->info = info;
+ priv->info = icl->priv;
v4l2_i2c_subdev_init(&priv->subdev, client, &ov772x_subdev_ops);
diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h b/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h
index de5485f..cb4057b 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h
+++ b/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h
@@ -233,8 +233,9 @@
int state_encoder_waitok; /* Encoder pre-wait done */
int state_encoder_runok; /* Encoder has run for >= .25 sec */
int state_decoder_run; /* Decoder is running */
+ int state_decoder_ready; /* Decoder is stabilized & streamable */
int state_usbstream_run; /* FX2 is streaming */
- int state_decoder_quiescent; /* Decoder idle for > 50msec */
+ int state_decoder_quiescent; /* Decoder idle for minimal interval */
int state_pipeline_config; /* Pipeline is configured */
int state_pipeline_req; /* Somebody wants to stream */
int state_pipeline_pause; /* Pipeline must be paused */
@@ -255,9 +256,16 @@
void (*state_func)(void *);
void *state_data;
- /* Timer for measuring decoder settling time */
+ /* Timer for measuring required decoder settling time before we're
+ allowed to fire it up again. */
struct timer_list quiescent_timer;
+ /* Timer for measuring decoder stabilization time, which is the
+ amount of time we need to let the decoder run before we can
+ trust its output (otherwise the encoder might see garbage and
+ then fail to start correctly). */
+ struct timer_list decoder_stabilization_timer;
+
/* Timer for measuring encoder pre-wait time */
struct timer_list encoder_wait_timer;
diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.c b/drivers/media/video/pvrusb2/pvrusb2-hdw.c
index 1bbdab0..712b300 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-hdw.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.c
@@ -48,11 +48,13 @@
before we are allowed to start it running. */
#define TIME_MSEC_DECODER_WAIT 50
+/* This defines a minimum interval that the decoder must be allowed to run
+ before we can safely begin using its streaming output. */
+#define TIME_MSEC_DECODER_STABILIZATION_WAIT 300
+
/* This defines a minimum interval that the encoder must remain quiet
- before we are allowed to configure it. I had this originally set to
- 50msec, but Martin Dauskardt <martin.dauskardt@gmx.de> reports that
- things work better when it's set to 100msec. */
-#define TIME_MSEC_ENCODER_WAIT 100
+ before we are allowed to configure it. */
+#define TIME_MSEC_ENCODER_WAIT 50
/* This defines the minimum interval that the encoder must successfully run
before we consider that the encoder has run at least once since its
@@ -334,6 +336,7 @@
static void pvr2_hdw_internal_find_stdenum(struct pvr2_hdw *hdw);
static void pvr2_hdw_internal_set_std_avail(struct pvr2_hdw *hdw);
static void pvr2_hdw_quiescent_timeout(unsigned long);
+static void pvr2_hdw_decoder_stabilization_timeout(unsigned long);
static void pvr2_hdw_encoder_wait_timeout(unsigned long);
static void pvr2_hdw_encoder_run_timeout(unsigned long);
static int pvr2_issue_simple_cmd(struct pvr2_hdw *,u32);
@@ -1705,6 +1708,7 @@
pvr2_trace(PVR2_TRACE_CHIPS, "subdev v4l2 stream=%s",
(enablefl ? "on" : "off"));
v4l2_device_call_all(&hdw->v4l2_dev, 0, video, s_stream, enablefl);
+ v4l2_device_call_all(&hdw->v4l2_dev, 0, audio, s_stream, enablefl);
if (hdw->decoder_client_id) {
/* We get here if the encoder has been noticed. Otherwise
we'll issue a warning to the user (which should
@@ -2461,6 +2465,11 @@
hdw->quiescent_timer.data = (unsigned long)hdw;
hdw->quiescent_timer.function = pvr2_hdw_quiescent_timeout;
+ init_timer(&hdw->decoder_stabilization_timer);
+ hdw->decoder_stabilization_timer.data = (unsigned long)hdw;
+ hdw->decoder_stabilization_timer.function =
+ pvr2_hdw_decoder_stabilization_timeout;
+
init_timer(&hdw->encoder_wait_timer);
hdw->encoder_wait_timer.data = (unsigned long)hdw;
hdw->encoder_wait_timer.function = pvr2_hdw_encoder_wait_timeout;
@@ -2674,6 +2683,7 @@
fail:
if (hdw) {
del_timer_sync(&hdw->quiescent_timer);
+ del_timer_sync(&hdw->decoder_stabilization_timer);
del_timer_sync(&hdw->encoder_run_timer);
del_timer_sync(&hdw->encoder_wait_timer);
if (hdw->workqueue) {
@@ -2741,6 +2751,7 @@
hdw->workqueue = NULL;
}
del_timer_sync(&hdw->quiescent_timer);
+ del_timer_sync(&hdw->decoder_stabilization_timer);
del_timer_sync(&hdw->encoder_run_timer);
del_timer_sync(&hdw->encoder_wait_timer);
if (hdw->fw_buffer) {
@@ -4452,7 +4463,7 @@
switch (hdw->pathway_state) {
case PVR2_PATHWAY_ANALOG:
- if (hdw->state_decoder_run) {
+ if (hdw->state_decoder_run && hdw->state_decoder_ready) {
/* In analog mode, if the decoder is running, then
run the encoder. */
return !0;
@@ -4519,6 +4530,17 @@
}
+/* Timeout function for decoder stabilization timer. */
+static void pvr2_hdw_decoder_stabilization_timeout(unsigned long data)
+{
+ struct pvr2_hdw *hdw = (struct pvr2_hdw *)data;
+ hdw->state_decoder_ready = !0;
+ trace_stbit("state_decoder_ready", hdw->state_decoder_ready);
+ hdw->state_stale = !0;
+ queue_work(hdw->workqueue, &hdw->workpoll);
+}
+
+
/* Timeout function for encoder wait timer. */
static void pvr2_hdw_encoder_wait_timeout(unsigned long data)
{
@@ -4557,8 +4579,13 @@
}
hdw->state_decoder_quiescent = 0;
hdw->state_decoder_run = 0;
- /* paranoia - solve race if timer just completed */
+ /* paranoia - solve race if timer(s) just completed */
del_timer_sync(&hdw->quiescent_timer);
+ /* Kill the stabilization timer, in case we're killing the
+ encoder before the previous stabilization interval has
+ been properly timed. */
+ del_timer_sync(&hdw->decoder_stabilization_timer);
+ hdw->state_decoder_ready = 0;
} else {
if (!hdw->state_decoder_quiescent) {
if (!timer_pending(&hdw->quiescent_timer)) {
@@ -4596,10 +4623,21 @@
if (hdw->flag_decoder_missed) return 0;
if (pvr2_decoder_enable(hdw,!0) < 0) return 0;
hdw->state_decoder_quiescent = 0;
+ hdw->state_decoder_ready = 0;
hdw->state_decoder_run = !0;
+ if (hdw->decoder_client_id == PVR2_CLIENT_ID_SAA7115) {
+ hdw->decoder_stabilization_timer.expires =
+ jiffies +
+ (HZ * TIME_MSEC_DECODER_STABILIZATION_WAIT /
+ 1000);
+ add_timer(&hdw->decoder_stabilization_timer);
+ } else {
+ hdw->state_decoder_ready = !0;
+ }
}
trace_stbit("state_decoder_quiescent",hdw->state_decoder_quiescent);
trace_stbit("state_decoder_run",hdw->state_decoder_run);
+ trace_stbit("state_decoder_ready", hdw->state_decoder_ready);
return !0;
}
@@ -4797,7 +4835,8 @@
buf,acnt,
"worker:%s%s%s%s%s%s%s",
(hdw->state_decoder_run ?
- " <decode:run>" :
+ (hdw->state_decoder_ready ?
+ "<decode:run>" : " <decode:start>") :
(hdw->state_decoder_quiescent ?
"" : " <decode:stop>")),
(hdw->state_decoder_quiescent ?
diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.h b/drivers/media/video/pvrusb2/pvrusb2-hdw.h
index 56e70ea..51d3009 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-hdw.h
+++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.h
@@ -306,6 +306,7 @@
int state_encoder_ok;
int state_encoder_run;
int state_decoder_run;
+ int state_decoder_ready;
int state_usbstream_run;
int state_decoder_quiescent;
int state_pipeline_config;
diff --git a/drivers/media/video/pxa_camera.c b/drivers/media/video/pxa_camera.c
index 294f860..322ac4e 100644
--- a/drivers/media/video/pxa_camera.c
+++ b/drivers/media/video/pxa_camera.c
@@ -898,18 +898,8 @@
static void pxa_camera_activate(struct pxa_camera_dev *pcdev)
{
- struct pxacamera_platform_data *pdata = pcdev->pdata;
- struct device *dev = pcdev->soc_host.v4l2_dev.dev;
u32 cicr4 = 0;
- dev_dbg(dev, "Registered platform device at %p data %p\n",
- pcdev, pdata);
-
- if (pdata && pdata->init) {
- dev_dbg(dev, "%s: Init gpios\n", __func__);
- pdata->init(dev);
- }
-
/* disable all interrupts */
__raw_writel(0x3ff, pcdev->base + CICR0);
diff --git a/drivers/media/video/rj54n1cb0c.c b/drivers/media/video/rj54n1cb0c.c
index 805226e..9277194 100644
--- a/drivers/media/video/rj54n1cb0c.c
+++ b/drivers/media/video/rj54n1cb0c.c
@@ -165,7 +165,7 @@
u8 val;
};
-const static struct rj54n1_reg_val bank_4[] = {
+static const struct rj54n1_reg_val bank_4[] = {
{0x417, 0},
{0x42c, 0},
{0x42d, 0xf0},
@@ -186,7 +186,7 @@
{0x4fe, 2},
};
-const static struct rj54n1_reg_val bank_5[] = {
+static const struct rj54n1_reg_val bank_5[] = {
{0x514, 0},
{0x516, 0},
{0x518, 0},
@@ -207,7 +207,7 @@
{0x5fe, 2},
};
-const static struct rj54n1_reg_val bank_7[] = {
+static const struct rj54n1_reg_val bank_7[] = {
{0x70a, 0},
{0x714, 0xff},
{0x715, 0xff},
@@ -215,7 +215,7 @@
{0x7FE, 2},
};
-const static struct rj54n1_reg_val bank_8[] = {
+static const struct rj54n1_reg_val bank_8[] = {
{0x800, 0x00},
{0x801, 0x01},
{0x802, 0x61},
@@ -403,12 +403,12 @@
{0x8FE, 2},
};
-const static struct rj54n1_reg_val bank_10[] = {
+static const struct rj54n1_reg_val bank_10[] = {
{0x10bf, 0x69}
};
/* Clock dividers - these are default register values, divider = register + 1 */
-const static struct rj54n1_clock_div clk_div = {
+static const struct rj54n1_clock_div clk_div = {
.ratio_tg = 3 /* default: 5 */,
.ratio_t = 4 /* default: 1 */,
.ratio_r = 4 /* default: 0 */,
diff --git a/drivers/media/video/saa7115.c b/drivers/media/video/saa7115.c
index 44873a0..c0a7f8a 100644
--- a/drivers/media/video/saa7115.c
+++ b/drivers/media/video/saa7115.c
@@ -104,6 +104,10 @@
if (id == V4L2_IDENT_SAA7111)
return reg < 0x20 && reg != 0x01 && reg != 0x0f &&
(reg < 0x13 || reg > 0x19) && reg != 0x1d && reg != 0x1e;
+ if (id == V4L2_IDENT_SAA7111A)
+ return reg < 0x20 && reg != 0x01 && reg != 0x0f &&
+ reg != 0x14 && reg != 0x18 && reg != 0x19 &&
+ reg != 0x1d && reg != 0x1e;
/* common for saa7113/4/5/8 */
if (unlikely((reg >= 0x3b && reg <= 0x3f) || reg == 0x5c || reg == 0x5f ||
@@ -954,8 +958,7 @@
011 NTSC N (3.58MHz) PAL M (3.58MHz)
100 reserved NTSC-Japan (3.58MHz)
*/
- if (state->ident == V4L2_IDENT_SAA7111 ||
- state->ident == V4L2_IDENT_SAA7113) {
+ if (state->ident <= V4L2_IDENT_SAA7113) {
u8 reg = saa711x_read(sd, R_0E_CHROMA_CNTL_1) & 0x8f;
if (std == V4L2_STD_PAL_M) {
@@ -1232,22 +1235,19 @@
u32 input, u32 output, u32 config)
{
struct saa711x_state *state = to_state(sd);
- u8 mask = (state->ident == V4L2_IDENT_SAA7111) ? 0xf8 : 0xf0;
+ u8 mask = (state->ident <= V4L2_IDENT_SAA7111A) ? 0xf8 : 0xf0;
v4l2_dbg(1, debug, sd, "decoder set input %d output %d\n",
input, output);
/* saa7111/3 does not have these inputs */
- if ((state->ident == V4L2_IDENT_SAA7113 ||
- state->ident == V4L2_IDENT_SAA7111) &&
+ if (state->ident <= V4L2_IDENT_SAA7113 &&
(input == SAA7115_COMPOSITE4 ||
input == SAA7115_COMPOSITE5)) {
return -EINVAL;
}
if (input > SAA7115_SVIDEO3)
return -EINVAL;
- if (output > SAA7115_IPORT_ON)
- return -EINVAL;
if (state->input == input && state->output == output)
return 0;
v4l2_dbg(1, debug, sd, "now setting %s input %s output\n",
@@ -1256,7 +1256,7 @@
state->input = input;
/* saa7111 has slightly different input numbering */
- if (state->ident == V4L2_IDENT_SAA7111) {
+ if (state->ident <= V4L2_IDENT_SAA7111A) {
if (input >= SAA7115_COMPOSITE4)
input -= 2;
/* saa7111 specific */
@@ -1292,7 +1292,7 @@
{
struct saa711x_state *state = to_state(sd);
- if (state->ident != V4L2_IDENT_SAA7111)
+ if (state->ident > V4L2_IDENT_SAA7111A)
return -EINVAL;
saa711x_write(sd, 0x11, (saa711x_read(sd, 0x11) & 0x7f) |
(val ? 0x80 : 0));
@@ -1596,6 +1596,10 @@
switch (chip_id) {
case '1':
state->ident = V4L2_IDENT_SAA7111;
+ if (saa711x_read(sd, R_00_CHIP_VERSION) & 0xf0) {
+ v4l_info(client, "saa7111a variant found\n");
+ state->ident = V4L2_IDENT_SAA7111A;
+ }
break;
case '3':
state->ident = V4L2_IDENT_SAA7113;
@@ -1612,7 +1616,7 @@
default:
state->ident = V4L2_IDENT_SAA7111;
v4l2_info(sd, "WARNING: Chip is not known - Falling back to saa7111\n");
-
+ break;
}
state->audclk_freq = 48000;
@@ -1623,6 +1627,7 @@
state->crystal_freq = SAA7115_FREQ_24_576_MHZ;
switch (state->ident) {
case V4L2_IDENT_SAA7111:
+ case V4L2_IDENT_SAA7111A:
saa711x_writeregs(sd, saa7111_init);
break;
case V4L2_IDENT_SAA7113:
@@ -1632,7 +1637,7 @@
state->crystal_freq = SAA7115_FREQ_32_11_MHZ;
saa711x_writeregs(sd, saa7115_init_auto_input);
}
- if (state->ident != V4L2_IDENT_SAA7111)
+ if (state->ident > V4L2_IDENT_SAA7111A)
saa711x_writeregs(sd, saa7115_init_misc);
saa711x_set_v4lstd(sd, V4L2_STD_NTSC);
diff --git a/drivers/media/video/saa7127.c b/drivers/media/video/saa7127.c
index 2fe7a70..250ef84 100644
--- a/drivers/media/video/saa7127.c
+++ b/drivers/media/video/saa7127.c
@@ -181,7 +181,7 @@
#define SAA7127_60HZ_DAC_CONTROL 0x15
static const struct i2c_reg_value saa7127_init_config_60hz[] = {
{ SAA7127_REG_BURST_START, 0x19 },
- /* BURST_END is also used as a chip ID in saa7127_detect_client */
+ /* BURST_END is also used as a chip ID in saa7127_probe */
{ SAA7127_REG_BURST_END, 0x1d },
{ SAA7127_REG_CHROMA_PHASE, 0xa3 },
{ SAA7127_REG_GAINU, 0x98 },
@@ -200,10 +200,10 @@
{ 0, 0 }
};
-#define SAA7127_50HZ_DAC_CONTROL 0x02
-static struct i2c_reg_value saa7127_init_config_50hz[] = {
+#define SAA7127_50HZ_PAL_DAC_CONTROL 0x02
+static struct i2c_reg_value saa7127_init_config_50hz_pal[] = {
{ SAA7127_REG_BURST_START, 0x21 },
- /* BURST_END is also used as a chip ID in saa7127_detect_client */
+ /* BURST_END is also used as a chip ID in saa7127_probe */
{ SAA7127_REG_BURST_END, 0x1d },
{ SAA7127_REG_CHROMA_PHASE, 0x3f },
{ SAA7127_REG_GAINU, 0x7d },
@@ -222,6 +222,28 @@
{ 0, 0 }
};
+#define SAA7127_50HZ_SECAM_DAC_CONTROL 0x08
+static struct i2c_reg_value saa7127_init_config_50hz_secam[] = {
+ { SAA7127_REG_BURST_START, 0x21 },
+ /* BURST_END is also used as a chip ID in saa7127_probe */
+ { SAA7127_REG_BURST_END, 0x1d },
+ { SAA7127_REG_CHROMA_PHASE, 0x3f },
+ { SAA7127_REG_GAINU, 0x6a },
+ { SAA7127_REG_GAINV, 0x81 },
+ { SAA7127_REG_BLACK_LEVEL, 0x33 },
+ { SAA7127_REG_BLANKING_LEVEL, 0x35 },
+ { SAA7127_REG_VBI_BLANKING, 0x35 },
+ { SAA7127_REG_DAC_CONTROL, 0x08 },
+ { SAA7127_REG_BURST_AMP, 0x2f },
+ { SAA7127_REG_SUBC3, 0xb2 },
+ { SAA7127_REG_SUBC2, 0x3b },
+ { SAA7127_REG_SUBC1, 0xa3 },
+ { SAA7127_REG_SUBC0, 0x28 },
+ { SAA7127_REG_MULTI, 0x90 },
+ { SAA7127_REG_CLOSED_CAPTION, 0x00 },
+ { 0, 0 }
+};
+
/*
**********************************************************************
*
@@ -463,10 +485,21 @@
v4l2_dbg(1, debug, sd, "Selecting 60 Hz video Standard\n");
inittab = saa7127_init_config_60hz;
state->reg_61 = SAA7127_60HZ_DAC_CONTROL;
+
+ } else if (state->ident == V4L2_IDENT_SAA7129 &&
+ (std & V4L2_STD_SECAM) &&
+ !(std & (V4L2_STD_625_50 & ~V4L2_STD_SECAM))) {
+
+ /* If and only if SECAM, with a SAA712[89] */
+ v4l2_dbg(1, debug, sd,
+ "Selecting 50 Hz SECAM video Standard\n");
+ inittab = saa7127_init_config_50hz_secam;
+ state->reg_61 = SAA7127_50HZ_SECAM_DAC_CONTROL;
+
} else {
- v4l2_dbg(1, debug, sd, "Selecting 50 Hz video Standard\n");
- inittab = saa7127_init_config_50hz;
- state->reg_61 = SAA7127_50HZ_DAC_CONTROL;
+ v4l2_dbg(1, debug, sd, "Selecting 50 Hz PAL video Standard\n");
+ inittab = saa7127_init_config_50hz_pal;
+ state->reg_61 = SAA7127_50HZ_PAL_DAC_CONTROL;
}
/* Write Table */
diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c
index 03f5727..297833f 100644
--- a/drivers/media/video/saa7134/saa7134-cards.c
+++ b/drivers/media/video/saa7134/saa7134-cards.c
@@ -4160,7 +4160,7 @@
.amux = LINE2,
},
},
- [SAA7134_BOARD_BEHOLD_505RDS] = {
+ [SAA7134_BOARD_BEHOLD_505RDS_MK5] = {
/* Beholder Intl. Ltd. 2008 */
/*Dmitry Belimov <d.belimov@gmail.com> */
.name = "Beholder BeholdTV 505 RDS",
@@ -5320,6 +5320,41 @@
.vmux = 8,
} },
},
+ [SAA7134_BOARD_BEHOLD_505RDS_MK3] = {
+ /* Beholder Intl. Ltd. 2008 */
+ /*Dmitry Belimov <d.belimov@gmail.com> */
+ .name = "Beholder BeholdTV 505 RDS",
+ .audio_clock = 0x00200000,
+ .tuner_type = TUNER_PHILIPS_FM1216ME_MK3,
+ .radio_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .radio_addr = ADDR_UNSET,
+ .rds_addr = 0x10,
+ .tda9887_conf = TDA9887_PRESENT,
+ .gpiomask = 0x00008000,
+ .inputs = {{
+ .name = name_tv,
+ .vmux = 3,
+ .amux = LINE2,
+ .tv = 1,
+ }, {
+ .name = name_comp1,
+ .vmux = 1,
+ .amux = LINE1,
+ }, {
+ .name = name_svideo,
+ .vmux = 8,
+ .amux = LINE1,
+ } },
+ .mute = {
+ .name = name_mute,
+ .amux = LINE1,
+ },
+ .radio = {
+ .name = name_radio,
+ .amux = LINE2,
+ },
+ },
};
@@ -6235,7 +6270,13 @@
.device = PCI_DEVICE_ID_PHILIPS_SAA7130,
.subvendor = 0x0000,
.subdevice = 0x505B,
- .driver_data = SAA7134_BOARD_BEHOLD_505RDS,
+ .driver_data = SAA7134_BOARD_BEHOLD_505RDS_MK5,
+ }, {
+ .vendor = PCI_VENDOR_ID_PHILIPS,
+ .device = PCI_DEVICE_ID_PHILIPS_SAA7130,
+ .subvendor = 0x0000,
+ .subdevice = 0x5051,
+ .driver_data = SAA7134_BOARD_BEHOLD_505RDS_MK3,
},{
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7130,
@@ -6792,7 +6833,8 @@
case SAA7134_BOARD_BEHOLD_407FM:
case SAA7134_BOARD_BEHOLD_409:
case SAA7134_BOARD_BEHOLD_505FM:
- case SAA7134_BOARD_BEHOLD_505RDS:
+ case SAA7134_BOARD_BEHOLD_505RDS_MK5:
+ case SAA7134_BOARD_BEHOLD_505RDS_MK3:
case SAA7134_BOARD_BEHOLD_507_9FM:
case SAA7134_BOARD_BEHOLD_507RDS_MK3:
case SAA7134_BOARD_BEHOLD_507RDS_MK5:
@@ -6953,8 +6995,8 @@
break;
case SAA7134_BOARD_VIDEOMATE_S350:
dev->has_remote = SAA7134_REMOTE_GPIO;
- saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x00008000, 0x00008000);
- saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x00008000, 0x00008000);
+ saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x0000C000, 0x0000C000);
+ saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x0000C000, 0x0000C000);
break;
}
return 0;
diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c
index f8e9859..9499000 100644
--- a/drivers/media/video/saa7134/saa7134-input.c
+++ b/drivers/media/video/saa7134/saa7134-input.c
@@ -460,7 +460,7 @@
int polling = 0;
int rc5_gpio = 0;
int nec_gpio = 0;
- int ir_type = IR_TYPE_OTHER;
+ u64 ir_type = IR_TYPE_OTHER;
int err;
if (dev->has_remote != SAA7134_REMOTE_GPIO)
@@ -568,7 +568,8 @@
case SAA7134_BOARD_BEHOLD_407FM:
case SAA7134_BOARD_BEHOLD_409:
case SAA7134_BOARD_BEHOLD_505FM:
- case SAA7134_BOARD_BEHOLD_505RDS:
+ case SAA7134_BOARD_BEHOLD_505RDS_MK5:
+ case SAA7134_BOARD_BEHOLD_505RDS_MK3:
case SAA7134_BOARD_BEHOLD_507_9FM:
case SAA7134_BOARD_BEHOLD_507RDS_MK3:
case SAA7134_BOARD_BEHOLD_507RDS_MK5:
@@ -728,7 +729,7 @@
dev->remote = ir;
saa7134_ir_start(dev, ir);
- err = ir_input_register(ir->dev, ir_codes);
+ err = ir_input_register(ir->dev, ir_codes, NULL);
if (err)
goto err_out_stop;
diff --git a/drivers/media/video/saa7134/saa7134-video.c b/drivers/media/video/saa7134/saa7134-video.c
index cb732640..31138d3 100644
--- a/drivers/media/video/saa7134/saa7134-video.c
+++ b/drivers/media/video/saa7134/saa7134-video.c
@@ -205,7 +205,7 @@
#define NORM_525_60 \
.h_start = 0, \
- .h_stop = 703, \
+ .h_stop = 719, \
.video_v_start = 23, \
.video_v_stop = 262, \
.vbi_v_start_0 = 10, \
diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h
index 53b7e0b..bf13096 100644
--- a/drivers/media/video/saa7134/saa7134.h
+++ b/drivers/media/video/saa7134/saa7134.h
@@ -282,7 +282,7 @@
#define SAA7134_BOARD_HAUPPAUGE_HVR1120 156
#define SAA7134_BOARD_AVERMEDIA_STUDIO_507UA 157
#define SAA7134_BOARD_AVERMEDIA_CARDBUS_501 158
-#define SAA7134_BOARD_BEHOLD_505RDS 159
+#define SAA7134_BOARD_BEHOLD_505RDS_MK5 159
#define SAA7134_BOARD_BEHOLD_507RDS_MK3 160
#define SAA7134_BOARD_BEHOLD_507RDS_MK5 161
#define SAA7134_BOARD_BEHOLD_607FM_MK5 162
@@ -299,6 +299,7 @@
#define SAA7134_BOARD_ZOLID_HYBRID_PCI 173
#define SAA7134_BOARD_ASUS_EUROPA_HYBRID 174
#define SAA7134_BOARD_LEADTEK_WINFAST_DTV1000S 175
+#define SAA7134_BOARD_BEHOLD_505RDS_MK3 176
#define SAA7134_MAXBOARDS 32
#define SAA7134_INPUT_MAX 8
diff --git a/drivers/media/video/saa7164/saa7164-api.c b/drivers/media/video/saa7164/saa7164-api.c
index 6f094a9..1d487c1 100644
--- a/drivers/media/video/saa7164/saa7164-api.c
+++ b/drivers/media/video/saa7164/saa7164-api.c
@@ -523,7 +523,7 @@
}
reglen = saa7164_i2caddr_to_reglen(bus, addr);
- if (unitid < 0) {
+ if (reglen < 0) {
printk(KERN_ERR
"%s() error, cannot translate regaddr to reglen\n",
__func__);
diff --git a/drivers/media/video/sh_mobile_ceu_camera.c b/drivers/media/video/sh_mobile_ceu_camera.c
index f09c714..fb88c63 100644
--- a/drivers/media/video/sh_mobile_ceu_camera.c
+++ b/drivers/media/video/sh_mobile_ceu_camera.c
@@ -1748,6 +1748,22 @@
icd);
}
+static int sh_mobile_ceu_get_parm(struct soc_camera_device *icd,
+ struct v4l2_streamparm *parm)
+{
+ struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
+
+ return v4l2_subdev_call(sd, video, g_parm, parm);
+}
+
+static int sh_mobile_ceu_set_parm(struct soc_camera_device *icd,
+ struct v4l2_streamparm *parm)
+{
+ struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
+
+ return v4l2_subdev_call(sd, video, s_parm, parm);
+}
+
static int sh_mobile_ceu_get_ctrl(struct soc_camera_device *icd,
struct v4l2_control *ctrl)
{
@@ -1808,6 +1824,8 @@
.try_fmt = sh_mobile_ceu_try_fmt,
.set_ctrl = sh_mobile_ceu_set_ctrl,
.get_ctrl = sh_mobile_ceu_get_ctrl,
+ .set_parm = sh_mobile_ceu_set_parm,
+ .get_parm = sh_mobile_ceu_get_parm,
.reqbufs = sh_mobile_ceu_reqbufs,
.poll = sh_mobile_ceu_poll,
.querycap = sh_mobile_ceu_querycap,
diff --git a/drivers/media/video/sn9c102/Kconfig b/drivers/media/video/sn9c102/Kconfig
index f71f272..6ebaf29 100644
--- a/drivers/media/video/sn9c102/Kconfig
+++ b/drivers/media/video/sn9c102/Kconfig
@@ -1,7 +1,10 @@
config USB_SN9C102
- tristate "USB SN9C1xx PC Camera Controller support"
+ tristate "USB SN9C1xx PC Camera Controller support (DEPRECATED)"
depends on VIDEO_V4L2
---help---
+ This driver is DEPRECATED please use the gspca sonixb and
+ sonixj modules instead.
+
Say Y here if you want support for cameras based on SONiX SN9C101,
SN9C102, SN9C103, SN9C105 and SN9C120 PC Camera Controllers.
diff --git a/drivers/media/video/sn9c102/sn9c102_devtable.h b/drivers/media/video/sn9c102/sn9c102_devtable.h
index 36ee43a..cc40d6b 100644
--- a/drivers/media/video/sn9c102/sn9c102_devtable.h
+++ b/drivers/media/video/sn9c102/sn9c102_devtable.h
@@ -45,20 +45,24 @@
{ SN9C102_USB_DEVICE(0x0c45, 0x6005, BRIDGE_SN9C102), },
#endif
{ SN9C102_USB_DEVICE(0x0c45, 0x6007, BRIDGE_SN9C102), },
+#if !defined CONFIG_USB_GSPCA && !defined CONFIG_USB_GSPCA_MODULE
{ SN9C102_USB_DEVICE(0x0c45, 0x6009, BRIDGE_SN9C102), },
{ SN9C102_USB_DEVICE(0x0c45, 0x600d, BRIDGE_SN9C102), },
/* { SN9C102_USB_DEVICE(0x0c45, 0x6011, BRIDGE_SN9C102), }, OV6650 */
+#endif
{ SN9C102_USB_DEVICE(0x0c45, 0x6019, BRIDGE_SN9C102), },
{ SN9C102_USB_DEVICE(0x0c45, 0x6024, BRIDGE_SN9C102), },
{ SN9C102_USB_DEVICE(0x0c45, 0x6025, BRIDGE_SN9C102), },
+#if !defined CONFIG_USB_GSPCA && !defined CONFIG_USB_GSPCA_MODULE
{ SN9C102_USB_DEVICE(0x0c45, 0x6028, BRIDGE_SN9C102), },
{ SN9C102_USB_DEVICE(0x0c45, 0x6029, BRIDGE_SN9C102), },
+#endif
{ SN9C102_USB_DEVICE(0x0c45, 0x602a, BRIDGE_SN9C102), },
{ SN9C102_USB_DEVICE(0x0c45, 0x602b, BRIDGE_SN9C102), },
#if !defined CONFIG_USB_GSPCA && !defined CONFIG_USB_GSPCA_MODULE
{ SN9C102_USB_DEVICE(0x0c45, 0x602c, BRIDGE_SN9C102), },
-#endif
/* { SN9C102_USB_DEVICE(0x0c45, 0x602d, BRIDGE_SN9C102), }, HV7131R */
+#endif
{ SN9C102_USB_DEVICE(0x0c45, 0x602e, BRIDGE_SN9C102), },
{ SN9C102_USB_DEVICE(0x0c45, 0x6030, BRIDGE_SN9C102), },
/* SN9C103 */
diff --git a/drivers/media/video/soc_camera.c b/drivers/media/video/soc_camera.c
index 6b3fbcca..80f6bfa 100644
--- a/drivers/media/video/soc_camera.c
+++ b/drivers/media/video/soc_camera.c
@@ -781,6 +781,32 @@
return ret;
}
+static int soc_camera_g_parm(struct file *file, void *fh,
+ struct v4l2_streamparm *a)
+{
+ struct soc_camera_file *icf = file->private_data;
+ struct soc_camera_device *icd = icf->icd;
+ struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+
+ if (ici->ops->get_parm)
+ return ici->ops->get_parm(icd, a);
+
+ return -ENOIOCTLCMD;
+}
+
+static int soc_camera_s_parm(struct file *file, void *fh,
+ struct v4l2_streamparm *a)
+{
+ struct soc_camera_file *icf = file->private_data;
+ struct soc_camera_device *icd = icf->icd;
+ struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+
+ if (ici->ops->set_parm)
+ return ici->ops->set_parm(icd, a);
+
+ return -ENOIOCTLCMD;
+}
+
static int soc_camera_g_chip_ident(struct file *file, void *fh,
struct v4l2_dbg_chip_ident *id)
{
@@ -846,10 +872,8 @@
struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
struct i2c_adapter *adap = i2c_get_adapter(icl->i2c_adapter_id);
struct v4l2_subdev *subdev;
- int ret;
if (!adap) {
- ret = -ENODEV;
dev_err(&icd->dev, "Cannot get I2C adapter #%d. No driver?\n",
icl->i2c_adapter_id);
goto ei2cga;
@@ -859,10 +883,8 @@
subdev = v4l2_i2c_new_subdev_board(&ici->v4l2_dev, adap,
icl->module_name, icl->board_info, NULL);
- if (!subdev) {
- ret = -ENOMEM;
+ if (!subdev)
goto ei2cnd;
- }
client = subdev->priv;
@@ -873,7 +895,7 @@
ei2cnd:
i2c_put_adapter(adap);
ei2cga:
- return ret;
+ return -ENODEV;
}
static void soc_camera_free_i2c(struct soc_camera_device *icd)
@@ -1260,6 +1282,8 @@
.vidioc_cropcap = soc_camera_cropcap,
.vidioc_g_crop = soc_camera_g_crop,
.vidioc_s_crop = soc_camera_s_crop,
+ .vidioc_g_parm = soc_camera_g_parm,
+ .vidioc_s_parm = soc_camera_s_parm,
.vidioc_g_chip_ident = soc_camera_g_chip_ident,
#ifdef CONFIG_VIDEO_ADV_DEBUG
.vidioc_g_register = soc_camera_g_register,
diff --git a/drivers/media/video/soc_mediabus.c b/drivers/media/video/soc_mediabus.c
index f8d5c87..8b63b65 100644
--- a/drivers/media/video/soc_mediabus.c
+++ b/drivers/media/video/soc_mediabus.c
@@ -24,91 +24,106 @@
.bits_per_sample = 8,
.packing = SOC_MBUS_PACKING_2X8_PADHI,
.order = SOC_MBUS_ORDER_LE,
- }, [MBUS_IDX(YVYU8_2X8_LE)] = {
+ },
+ [MBUS_IDX(YVYU8_2X8_LE)] = {
.fourcc = V4L2_PIX_FMT_YVYU,
.name = "YVYU",
.bits_per_sample = 8,
.packing = SOC_MBUS_PACKING_2X8_PADHI,
.order = SOC_MBUS_ORDER_LE,
- }, [MBUS_IDX(YUYV8_2X8_BE)] = {
+ },
+ [MBUS_IDX(YUYV8_2X8_BE)] = {
.fourcc = V4L2_PIX_FMT_UYVY,
.name = "UYVY",
.bits_per_sample = 8,
.packing = SOC_MBUS_PACKING_2X8_PADHI,
.order = SOC_MBUS_ORDER_LE,
- }, [MBUS_IDX(YVYU8_2X8_BE)] = {
+ },
+ [MBUS_IDX(YVYU8_2X8_BE)] = {
.fourcc = V4L2_PIX_FMT_VYUY,
.name = "VYUY",
.bits_per_sample = 8,
.packing = SOC_MBUS_PACKING_2X8_PADHI,
.order = SOC_MBUS_ORDER_LE,
- }, [MBUS_IDX(RGB555_2X8_PADHI_LE)] = {
+ },
+ [MBUS_IDX(RGB555_2X8_PADHI_LE)] = {
.fourcc = V4L2_PIX_FMT_RGB555,
.name = "RGB555",
.bits_per_sample = 8,
.packing = SOC_MBUS_PACKING_2X8_PADHI,
.order = SOC_MBUS_ORDER_LE,
- }, [MBUS_IDX(RGB555_2X8_PADHI_BE)] = {
+ },
+ [MBUS_IDX(RGB555_2X8_PADHI_BE)] = {
.fourcc = V4L2_PIX_FMT_RGB555X,
.name = "RGB555X",
.bits_per_sample = 8,
.packing = SOC_MBUS_PACKING_2X8_PADHI,
.order = SOC_MBUS_ORDER_LE,
- }, [MBUS_IDX(RGB565_2X8_LE)] = {
+ },
+ [MBUS_IDX(RGB565_2X8_LE)] = {
.fourcc = V4L2_PIX_FMT_RGB565,
.name = "RGB565",
.bits_per_sample = 8,
.packing = SOC_MBUS_PACKING_2X8_PADHI,
.order = SOC_MBUS_ORDER_LE,
- }, [MBUS_IDX(RGB565_2X8_BE)] = {
+ },
+ [MBUS_IDX(RGB565_2X8_BE)] = {
.fourcc = V4L2_PIX_FMT_RGB565X,
.name = "RGB565X",
.bits_per_sample = 8,
.packing = SOC_MBUS_PACKING_2X8_PADHI,
.order = SOC_MBUS_ORDER_LE,
- }, [MBUS_IDX(SBGGR8_1X8)] = {
+ },
+ [MBUS_IDX(SBGGR8_1X8)] = {
.fourcc = V4L2_PIX_FMT_SBGGR8,
.name = "Bayer 8 BGGR",
.bits_per_sample = 8,
.packing = SOC_MBUS_PACKING_NONE,
.order = SOC_MBUS_ORDER_LE,
- }, [MBUS_IDX(SBGGR10_1X10)] = {
+ },
+ [MBUS_IDX(SBGGR10_1X10)] = {
.fourcc = V4L2_PIX_FMT_SBGGR10,
.name = "Bayer 10 BGGR",
.bits_per_sample = 10,
.packing = SOC_MBUS_PACKING_EXTEND16,
.order = SOC_MBUS_ORDER_LE,
- }, [MBUS_IDX(GREY8_1X8)] = {
+ },
+ [MBUS_IDX(GREY8_1X8)] = {
.fourcc = V4L2_PIX_FMT_GREY,
.name = "Grey",
.bits_per_sample = 8,
.packing = SOC_MBUS_PACKING_NONE,
.order = SOC_MBUS_ORDER_LE,
- }, [MBUS_IDX(Y10_1X10)] = {
+ },
+ [MBUS_IDX(Y10_1X10)] = {
.fourcc = V4L2_PIX_FMT_Y10,
.name = "Grey 10bit",
.bits_per_sample = 10,
.packing = SOC_MBUS_PACKING_EXTEND16,
.order = SOC_MBUS_ORDER_LE,
- }, [MBUS_IDX(SBGGR10_2X8_PADHI_LE)] = {
+ },
+ [MBUS_IDX(SBGGR10_2X8_PADHI_LE)] = {
.fourcc = V4L2_PIX_FMT_SBGGR10,
.name = "Bayer 10 BGGR",
.bits_per_sample = 8,
.packing = SOC_MBUS_PACKING_2X8_PADHI,
.order = SOC_MBUS_ORDER_LE,
- }, [MBUS_IDX(SBGGR10_2X8_PADLO_LE)] = {
+ },
+ [MBUS_IDX(SBGGR10_2X8_PADLO_LE)] = {
.fourcc = V4L2_PIX_FMT_SBGGR10,
.name = "Bayer 10 BGGR",
.bits_per_sample = 8,
.packing = SOC_MBUS_PACKING_2X8_PADLO,
.order = SOC_MBUS_ORDER_LE,
- }, [MBUS_IDX(SBGGR10_2X8_PADHI_BE)] = {
+ },
+ [MBUS_IDX(SBGGR10_2X8_PADHI_BE)] = {
.fourcc = V4L2_PIX_FMT_SBGGR10,
.name = "Bayer 10 BGGR",
.bits_per_sample = 8,
.packing = SOC_MBUS_PACKING_2X8_PADHI,
.order = SOC_MBUS_ORDER_BE,
- }, [MBUS_IDX(SBGGR10_2X8_PADLO_BE)] = {
+ },
+ [MBUS_IDX(SBGGR10_2X8_PADLO_BE)] = {
.fourcc = V4L2_PIX_FMT_SBGGR10,
.name = "Bayer 10 BGGR",
.bits_per_sample = 8,
@@ -134,7 +149,8 @@
const struct soc_mbus_pixelfmt *soc_mbus_get_fmtdesc(
enum v4l2_mbus_pixelcode code)
{
- if ((unsigned int)(code - V4L2_MBUS_FMT_FIXED) > ARRAY_SIZE(mbus_fmt))
+ if (code - V4L2_MBUS_FMT_FIXED > ARRAY_SIZE(mbus_fmt) ||
+ code <= V4L2_MBUS_FMT_FIXED)
return NULL;
return mbus_fmt + code - V4L2_MBUS_FMT_FIXED - 1;
}
diff --git a/drivers/media/video/tlg2300/Kconfig b/drivers/media/video/tlg2300/Kconfig
new file mode 100644
index 0000000..2c29ec6
--- /dev/null
+++ b/drivers/media/video/tlg2300/Kconfig
@@ -0,0 +1,16 @@
+config VIDEO_TLG2300
+ tristate "Telegent TLG2300 USB video capture support"
+ depends on VIDEO_DEV && I2C && INPUT && SND && DVB_CORE
+ select VIDEO_TUNER
+ select VIDEO_TVEEPROM
+ select VIDEO_IR
+ select VIDEOBUF_VMALLOC
+ select SND_PCM
+ select VIDEOBUF_DVB
+
+ ---help---
+ This is a video4linux driver for Telegent tlg2300 based TV cards.
+ The driver supports V4L2, DVB-T and radio.
+
+ To compile this driver as a module, choose M here: the
+ module will be called poseidon
diff --git a/drivers/media/video/tlg2300/Makefile b/drivers/media/video/tlg2300/Makefile
new file mode 100644
index 0000000..81bb7fd
--- /dev/null
+++ b/drivers/media/video/tlg2300/Makefile
@@ -0,0 +1,9 @@
+poseidon-objs := pd-video.o pd-alsa.o pd-dvb.o pd-radio.o pd-main.o
+
+obj-$(CONFIG_VIDEO_TLG2300) += poseidon.o
+
+EXTRA_CFLAGS += -Idrivers/media/video
+EXTRA_CFLAGS += -Idrivers/media/common/tuners
+EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core
+EXTRA_CFLAGS += -Idrivers/media/dvb/frontends
+
diff --git a/drivers/media/video/tlg2300/pd-alsa.c b/drivers/media/video/tlg2300/pd-alsa.c
new file mode 100644
index 0000000..6f42621
--- /dev/null
+++ b/drivers/media/video/tlg2300/pd-alsa.c
@@ -0,0 +1,332 @@
+#include <linux/kernel.h>
+#include <linux/usb.h>
+#include <linux/init.h>
+#include <linux/sound.h>
+#include <linux/spinlock.h>
+#include <linux/soundcard.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+#include <linux/proc_fs.h>
+#include <linux/module.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/info.h>
+#include <sound/initval.h>
+#include <sound/control.h>
+#include <media/v4l2-common.h>
+#include "pd-common.h"
+#include "vendorcmds.h"
+
+static void complete_handler_audio(struct urb *urb);
+#define AUDIO_EP (0x83)
+#define AUDIO_BUF_SIZE (512)
+#define PERIOD_SIZE (1024 * 8)
+#define PERIOD_MIN (4)
+#define PERIOD_MAX PERIOD_MIN
+
+static struct snd_pcm_hardware snd_pd_hw_capture = {
+ .info = SNDRV_PCM_INFO_BLOCK_TRANSFER |
+ SNDRV_PCM_INFO_MMAP |
+ SNDRV_PCM_INFO_INTERLEAVED |
+ SNDRV_PCM_INFO_MMAP_VALID,
+
+ .formats = SNDRV_PCM_FMTBIT_S16_LE,
+ .rates = SNDRV_PCM_RATE_48000,
+
+ .rate_min = 48000,
+ .rate_max = 48000,
+ .channels_min = 2,
+ .channels_max = 2,
+ .buffer_bytes_max = PERIOD_SIZE * PERIOD_MIN,
+ .period_bytes_min = PERIOD_SIZE,
+ .period_bytes_max = PERIOD_SIZE,
+ .periods_min = PERIOD_MIN,
+ .periods_max = PERIOD_MAX,
+ /*
+ .buffer_bytes_max = 62720 * 8,
+ .period_bytes_min = 64,
+ .period_bytes_max = 12544,
+ .periods_min = 2,
+ .periods_max = 98
+ */
+};
+
+static int snd_pd_capture_open(struct snd_pcm_substream *substream)
+{
+ struct poseidon *p = snd_pcm_substream_chip(substream);
+ struct poseidon_audio *pa = &p->audio;
+ struct snd_pcm_runtime *runtime = substream->runtime;
+
+ if (!p)
+ return -ENODEV;
+ pa->users++;
+ pa->card_close = 0;
+ pa->capture_pcm_substream = substream;
+ runtime->private_data = p;
+
+ runtime->hw = snd_pd_hw_capture;
+ snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS);
+ usb_autopm_get_interface(p->interface);
+ kref_get(&p->kref);
+ return 0;
+}
+
+static int snd_pd_pcm_close(struct snd_pcm_substream *substream)
+{
+ struct poseidon *p = snd_pcm_substream_chip(substream);
+ struct poseidon_audio *pa = &p->audio;
+
+ pa->users--;
+ pa->card_close = 1;
+ usb_autopm_put_interface(p->interface);
+ kref_put(&p->kref, poseidon_delete);
+ return 0;
+}
+
+static int snd_pd_hw_capture_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *hw_params)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ unsigned int size;
+
+ size = params_buffer_bytes(hw_params);
+ if (runtime->dma_area) {
+ if (runtime->dma_bytes > size)
+ return 0;
+ vfree(runtime->dma_area);
+ }
+ runtime->dma_area = vmalloc(size);
+ if (!runtime->dma_area)
+ return -ENOMEM;
+ else
+ runtime->dma_bytes = size;
+ return 0;
+}
+
+static int audio_buf_free(struct poseidon *p)
+{
+ struct poseidon_audio *pa = &p->audio;
+ int i;
+
+ for (i = 0; i < AUDIO_BUFS; i++)
+ if (pa->urb_array[i])
+ usb_kill_urb(pa->urb_array[i]);
+ free_all_urb_generic(pa->urb_array, AUDIO_BUFS);
+ logpm();
+ return 0;
+}
+
+static int snd_pd_hw_capture_free(struct snd_pcm_substream *substream)
+{
+ struct poseidon *p = snd_pcm_substream_chip(substream);
+
+ logpm();
+ audio_buf_free(p);
+ return 0;
+}
+
+static int snd_pd_prepare(struct snd_pcm_substream *substream)
+{
+ return 0;
+}
+
+#define AUDIO_TRAILER_SIZE (16)
+static inline void handle_audio_data(struct urb *urb, int *period_elapsed)
+{
+ struct poseidon_audio *pa = urb->context;
+ struct snd_pcm_runtime *runtime = pa->capture_pcm_substream->runtime;
+
+ int stride = runtime->frame_bits >> 3;
+ int len = urb->actual_length / stride;
+ unsigned char *cp = urb->transfer_buffer;
+ unsigned int oldptr = pa->rcv_position;
+
+ if (urb->actual_length == AUDIO_BUF_SIZE - 4)
+ len -= (AUDIO_TRAILER_SIZE / stride);
+
+ /* do the copy */
+ if (oldptr + len >= runtime->buffer_size) {
+ unsigned int cnt = runtime->buffer_size - oldptr;
+
+ memcpy(runtime->dma_area + oldptr * stride, cp, cnt * stride);
+ memcpy(runtime->dma_area, (cp + cnt * stride),
+ (len * stride - cnt * stride));
+ } else
+ memcpy(runtime->dma_area + oldptr * stride, cp, len * stride);
+
+ /* update the statas */
+ snd_pcm_stream_lock(pa->capture_pcm_substream);
+ pa->rcv_position += len;
+ if (pa->rcv_position >= runtime->buffer_size)
+ pa->rcv_position -= runtime->buffer_size;
+
+ pa->copied_position += (len);
+ if (pa->copied_position >= runtime->period_size) {
+ pa->copied_position -= runtime->period_size;
+ *period_elapsed = 1;
+ }
+ snd_pcm_stream_unlock(pa->capture_pcm_substream);
+}
+
+static void complete_handler_audio(struct urb *urb)
+{
+ struct poseidon_audio *pa = urb->context;
+ struct snd_pcm_substream *substream = pa->capture_pcm_substream;
+ int period_elapsed = 0;
+ int ret;
+
+ if (1 == pa->card_close || pa->capture_stream != STREAM_ON)
+ return;
+
+ if (urb->status != 0) {
+ /*if (urb->status == -ESHUTDOWN)*/
+ return;
+ }
+
+ if (substream) {
+ if (urb->actual_length) {
+ handle_audio_data(urb, &period_elapsed);
+ if (period_elapsed)
+ snd_pcm_period_elapsed(substream);
+ }
+ }
+
+ ret = usb_submit_urb(urb, GFP_ATOMIC);
+ if (ret < 0)
+ log("audio urb failed (errcod = %i)", ret);
+ return;
+}
+
+static int fire_audio_urb(struct poseidon *p)
+{
+ int i, ret = 0;
+ struct poseidon_audio *pa = &p->audio;
+
+ alloc_bulk_urbs_generic(pa->urb_array, AUDIO_BUFS,
+ p->udev, AUDIO_EP,
+ AUDIO_BUF_SIZE, GFP_ATOMIC,
+ complete_handler_audio, pa);
+
+ for (i = 0; i < AUDIO_BUFS; i++) {
+ ret = usb_submit_urb(pa->urb_array[i], GFP_KERNEL);
+ if (ret)
+ log("urb err : %d", ret);
+ }
+ log();
+ return ret;
+}
+
+static int snd_pd_capture_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+ struct poseidon *p = snd_pcm_substream_chip(substream);
+ struct poseidon_audio *pa = &p->audio;
+
+ if (debug_mode)
+ log("cmd %d, audio stat : %d\n", cmd, pa->capture_stream);
+
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_RESUME:
+ case SNDRV_PCM_TRIGGER_START:
+ if (pa->capture_stream == STREAM_ON)
+ return 0;
+
+ pa->rcv_position = pa->copied_position = 0;
+ pa->capture_stream = STREAM_ON;
+
+ if (in_hibernation(p))
+ return 0;
+ fire_audio_urb(p);
+ return 0;
+
+ case SNDRV_PCM_TRIGGER_SUSPEND:
+ pa->capture_stream = STREAM_SUSPEND;
+ return 0;
+ case SNDRV_PCM_TRIGGER_STOP:
+ pa->capture_stream = STREAM_OFF;
+ return 0;
+ default:
+ return -EINVAL;
+ }
+}
+
+static snd_pcm_uframes_t
+snd_pd_capture_pointer(struct snd_pcm_substream *substream)
+{
+ struct poseidon *p = snd_pcm_substream_chip(substream);
+ struct poseidon_audio *pa = &p->audio;
+ return pa->rcv_position;
+}
+
+static struct page *snd_pcm_pd_get_page(struct snd_pcm_substream *subs,
+ unsigned long offset)
+{
+ void *pageptr = subs->runtime->dma_area + offset;
+ return vmalloc_to_page(pageptr);
+}
+
+static struct snd_pcm_ops pcm_capture_ops = {
+ .open = snd_pd_capture_open,
+ .close = snd_pd_pcm_close,
+ .ioctl = snd_pcm_lib_ioctl,
+ .hw_params = snd_pd_hw_capture_params,
+ .hw_free = snd_pd_hw_capture_free,
+ .prepare = snd_pd_prepare,
+ .trigger = snd_pd_capture_trigger,
+ .pointer = snd_pd_capture_pointer,
+ .page = snd_pcm_pd_get_page,
+};
+
+#ifdef CONFIG_PM
+int pm_alsa_suspend(struct poseidon *p)
+{
+ logpm(p);
+ audio_buf_free(p);
+ return 0;
+}
+
+int pm_alsa_resume(struct poseidon *p)
+{
+ logpm(p);
+ fire_audio_urb(p);
+ return 0;
+}
+#endif
+
+int poseidon_audio_init(struct poseidon *p)
+{
+ struct poseidon_audio *pa = &p->audio;
+ struct snd_card *card;
+ struct snd_pcm *pcm;
+ int ret;
+
+ ret = snd_card_create(-1, "Telegent", THIS_MODULE, 0, &card);
+ if (ret != 0)
+ return ret;
+
+ ret = snd_pcm_new(card, "poseidon audio", 0, 0, 1, &pcm);
+ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &pcm_capture_ops);
+ pcm->info_flags = 0;
+ pcm->private_data = p;
+ strcpy(pcm->name, "poseidon audio capture");
+
+ strcpy(card->driver, "ALSA driver");
+ strcpy(card->shortname, "poseidon Audio");
+ strcpy(card->longname, "poseidon ALSA Audio");
+
+ if (snd_card_register(card)) {
+ snd_card_free(card);
+ return -ENOMEM;
+ }
+ pa->card = card;
+ return 0;
+}
+
+int poseidon_audio_free(struct poseidon *p)
+{
+ struct poseidon_audio *pa = &p->audio;
+
+ if (pa->card)
+ snd_card_free(pa->card);
+ return 0;
+}
diff --git a/drivers/media/video/tlg2300/pd-common.h b/drivers/media/video/tlg2300/pd-common.h
new file mode 100644
index 0000000..46066bd
--- /dev/null
+++ b/drivers/media/video/tlg2300/pd-common.h
@@ -0,0 +1,282 @@
+#ifndef PD_COMMON_H
+#define PD_COMMON_H
+
+#include <linux/version.h>
+#include <linux/fs.h>
+#include <linux/wait.h>
+#include <linux/list.h>
+#include <linux/videodev2.h>
+#include <linux/semaphore.h>
+#include <linux/usb.h>
+#include <linux/poll.h>
+#include <media/videobuf-vmalloc.h>
+#include <media/v4l2-device.h>
+
+#include "dvb_frontend.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dmxdev.h"
+
+#define SBUF_NUM 8
+#define MAX_BUFFER_NUM 6
+#define PK_PER_URB 32
+#define ISO_PKT_SIZE 3072
+
+#define POSEIDON_STATE_NONE (0x0000)
+#define POSEIDON_STATE_ANALOG (0x0001)
+#define POSEIDON_STATE_FM (0x0002)
+#define POSEIDON_STATE_DVBT (0x0004)
+#define POSEIDON_STATE_VBI (0x0008)
+#define POSEIDON_STATE_DISCONNECT (0x0080)
+
+#define PM_SUSPEND_DELAY 3
+
+#define V4L_PAL_VBI_LINES 18
+#define V4L_NTSC_VBI_LINES 12
+#define V4L_PAL_VBI_FRAMESIZE (V4L_PAL_VBI_LINES * 1440 * 2)
+#define V4L_NTSC_VBI_FRAMESIZE (V4L_NTSC_VBI_LINES * 1440 * 2)
+
+#define TUNER_FREQ_MIN (45000000)
+#define TUNER_FREQ_MAX (862000000)
+
+struct vbi_data {
+ struct video_device *v_dev;
+ struct video_data *video;
+ struct front_face *front;
+
+ unsigned int copied;
+ unsigned int vbi_size; /* the whole size of two fields */
+ int users;
+};
+
+/*
+ * This is the running context of the video, it is useful for
+ * resume()
+ */
+struct running_context {
+ u32 freq; /* VIDIOC_S_FREQUENCY */
+ int audio_idx; /* VIDIOC_S_TUNER */
+ v4l2_std_id tvnormid; /* VIDIOC_S_STD */
+ int sig_index; /* VIDIOC_S_INPUT */
+ struct v4l2_pix_format pix; /* VIDIOC_S_FMT */
+};
+
+struct video_data {
+ /* v4l2 video device */
+ struct video_device *v_dev;
+
+ /* the working context */
+ struct running_context context;
+
+ /* for data copy */
+ int field_count;
+
+ char *dst;
+ int lines_copied;
+ int prev_left;
+
+ int lines_per_field;
+ int lines_size;
+
+ /* for communication */
+ u8 endpoint_addr;
+ struct urb *urb_array[SBUF_NUM];
+ struct vbi_data *vbi;
+ struct poseidon *pd;
+ struct front_face *front;
+
+ int is_streaming;
+ int users;
+
+ /* for bubble handler */
+ struct work_struct bubble_work;
+};
+
+enum pcm_stream_state {
+ STREAM_OFF,
+ STREAM_ON,
+ STREAM_SUSPEND,
+};
+
+#define AUDIO_BUFS (3)
+#define CAPTURE_STREAM_EN 1
+struct poseidon_audio {
+ struct urb *urb_array[AUDIO_BUFS];
+ unsigned int copied_position;
+ struct snd_pcm_substream *capture_pcm_substream;
+
+ unsigned int rcv_position;
+ struct snd_card *card;
+ int card_close;
+
+ int users;
+ int pm_state;
+ enum pcm_stream_state capture_stream;
+};
+
+struct radio_data {
+ __u32 fm_freq;
+ int users;
+ unsigned int is_radio_streaming;
+ int pre_emphasis;
+ struct video_device *fm_dev;
+};
+
+#define DVB_SBUF_NUM 4
+#define DVB_URB_BUF_SIZE 0x2000
+struct pd_dvb_adapter {
+ struct dvb_adapter dvb_adap;
+ struct dvb_frontend dvb_fe;
+ struct dmxdev dmxdev;
+ struct dvb_demux demux;
+
+ atomic_t users;
+ atomic_t active_feed;
+
+ /* data transfer */
+ s32 is_streaming;
+ struct urb *urb_array[DVB_SBUF_NUM];
+ struct poseidon *pd_device;
+ u8 ep_addr;
+ u8 reserved[3];
+
+ /* data for power resume*/
+ struct dvb_frontend_parameters fe_param;
+
+ /* for channel scanning */
+ int prev_freq;
+ int bandwidth;
+ unsigned long last_jiffies;
+};
+
+struct front_face {
+ /* use this field to distinguish VIDEO and VBI */
+ enum v4l2_buf_type type;
+
+ /* for host */
+ struct videobuf_queue q;
+
+ /* the bridge for host and device */
+ struct videobuf_buffer *curr_frame;
+
+ /* for device */
+ spinlock_t queue_lock;
+ struct list_head active;
+ struct poseidon *pd;
+};
+
+struct poseidon {
+ struct list_head device_list;
+
+ struct mutex lock;
+ struct kref kref;
+
+ /* for V4L2 */
+ struct v4l2_device v4l2_dev;
+
+ /* hardware info */
+ struct usb_device *udev;
+ struct usb_interface *interface;
+ int cur_transfer_mode;
+
+ struct video_data video_data; /* video */
+ struct vbi_data vbi_data; /* vbi */
+ struct poseidon_audio audio; /* audio (alsa) */
+ struct radio_data radio_data; /* FM */
+ struct pd_dvb_adapter dvb_data; /* DVB */
+
+ u32 state;
+ struct file *file_for_stream; /* the active stream*/
+
+#ifdef CONFIG_PM
+ int (*pm_suspend)(struct poseidon *);
+ int (*pm_resume)(struct poseidon *);
+ pm_message_t msg;
+
+ struct work_struct pm_work;
+ u8 portnum;
+#endif
+};
+
+struct poseidon_format {
+ char *name;
+ int fourcc; /* video4linux 2 */
+ int depth; /* bit/pixel */
+ int flags;
+};
+
+struct poseidon_tvnorm {
+ v4l2_std_id v4l2_id;
+ char name[12];
+ u32 tlg_tvnorm;
+};
+
+/* video */
+int pd_video_init(struct poseidon *);
+void pd_video_exit(struct poseidon *);
+int stop_all_video_stream(struct poseidon *);
+
+/* alsa audio */
+int poseidon_audio_init(struct poseidon *);
+int poseidon_audio_free(struct poseidon *);
+#ifdef CONFIG_PM
+int pm_alsa_suspend(struct poseidon *);
+int pm_alsa_resume(struct poseidon *);
+#endif
+
+/* dvb */
+int pd_dvb_usb_device_init(struct poseidon *);
+void pd_dvb_usb_device_exit(struct poseidon *);
+void pd_dvb_usb_device_cleanup(struct poseidon *);
+int pd_dvb_get_adapter_num(struct pd_dvb_adapter *);
+void dvb_stop_streaming(struct pd_dvb_adapter *);
+
+/* FM */
+int poseidon_fm_init(struct poseidon *);
+int poseidon_fm_exit(struct poseidon *);
+struct video_device *vdev_init(struct poseidon *, struct video_device *);
+
+/* vendor command ops */
+int send_set_req(struct poseidon*, u8, s32, s32*);
+int send_get_req(struct poseidon*, u8, s32, void*, s32*, s32);
+s32 set_tuner_mode(struct poseidon*, unsigned char);
+
+/* bulk urb alloc/free */
+int alloc_bulk_urbs_generic(struct urb **urb_array, int num,
+ struct usb_device *udev, u8 ep_addr,
+ int buf_size, gfp_t gfp_flags,
+ usb_complete_t complete_fn, void *context);
+void free_all_urb_generic(struct urb **urb_array, int num);
+
+/* misc */
+void poseidon_delete(struct kref *kref);
+void destroy_video_device(struct video_device **v_dev);
+extern int debug_mode;
+void set_debug_mode(struct video_device *vfd, int debug_mode);
+
+#ifdef CONFIG_PM
+#define in_hibernation(pd) (pd->msg.event == PM_EVENT_FREEZE)
+#else
+#define in_hibernation(pd) (0)
+#endif
+#define get_pm_count(p) (atomic_read(&(p)->interface->pm_usage_cnt))
+
+#define log(a, ...) printk(KERN_DEBUG "\t[ %s : %.3d ] "a"\n", \
+ __func__, __LINE__, ## __VA_ARGS__)
+
+/* for power management */
+#define logpm(pd) do {\
+ if (debug_mode & 0x10)\
+ log();\
+ } while (0)
+
+#define logs(f) do { \
+ if ((debug_mode & 0x4) && \
+ (f)->type == V4L2_BUF_TYPE_VBI_CAPTURE) \
+ log("type : VBI");\
+ \
+ if ((debug_mode & 0x8) && \
+ (f)->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) \
+ log("type : VIDEO");\
+ } while (0)
+#endif
diff --git a/drivers/media/video/tlg2300/pd-dvb.c b/drivers/media/video/tlg2300/pd-dvb.c
new file mode 100644
index 0000000..4133aee
--- /dev/null
+++ b/drivers/media/video/tlg2300/pd-dvb.c
@@ -0,0 +1,593 @@
+#include "pd-common.h"
+#include <linux/kernel.h>
+#include <linux/usb.h>
+#include <linux/dvb/dmx.h>
+#include <linux/delay.h>
+
+#include "vendorcmds.h"
+#include <linux/sched.h>
+#include <asm/atomic.h>
+
+static void dvb_urb_cleanup(struct pd_dvb_adapter *pd_dvb);
+
+static int dvb_bandwidth[][2] = {
+ { TLG_BW_8, BANDWIDTH_8_MHZ },
+ { TLG_BW_7, BANDWIDTH_7_MHZ },
+ { TLG_BW_6, BANDWIDTH_6_MHZ }
+};
+static int dvb_bandwidth_length = ARRAY_SIZE(dvb_bandwidth);
+
+static s32 dvb_start_streaming(struct pd_dvb_adapter *pd_dvb);
+static int poseidon_check_mode_dvbt(struct poseidon *pd)
+{
+ s32 ret = 0, cmd_status = 0;
+
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(HZ/4);
+
+ ret = usb_set_interface(pd->udev, 0, BULK_ALTERNATE_IFACE);
+ if (ret != 0)
+ return ret;
+
+ ret = set_tuner_mode(pd, TLG_MODE_CAPS_DVB_T);
+ if (ret)
+ return ret;
+
+ /* signal source */
+ ret = send_set_req(pd, SGNL_SRC_SEL, TLG_SIG_SRC_ANTENNA, &cmd_status);
+ if (ret|cmd_status)
+ return ret;
+
+ return 0;
+}
+
+/* acquire :
+ * 1 == open
+ * 0 == release
+ */
+static int poseidon_ts_bus_ctrl(struct dvb_frontend *fe, int acquire)
+{
+ struct poseidon *pd = fe->demodulator_priv;
+ struct pd_dvb_adapter *pd_dvb;
+ int ret = 0;
+
+ if (!pd)
+ return -ENODEV;
+
+ pd_dvb = container_of(fe, struct pd_dvb_adapter, dvb_fe);
+ if (acquire) {
+ mutex_lock(&pd->lock);
+ if (pd->state & POSEIDON_STATE_DISCONNECT) {
+ ret = -ENODEV;
+ goto open_out;
+ }
+
+ if (pd->state && !(pd->state & POSEIDON_STATE_DVBT)) {
+ ret = -EBUSY;
+ goto open_out;
+ }
+
+ usb_autopm_get_interface(pd->interface);
+ if (0 == pd->state) {
+ ret = poseidon_check_mode_dvbt(pd);
+ if (ret < 0) {
+ usb_autopm_put_interface(pd->interface);
+ goto open_out;
+ }
+ pd->state |= POSEIDON_STATE_DVBT;
+ pd_dvb->bandwidth = 0;
+ pd_dvb->prev_freq = 0;
+ }
+ atomic_inc(&pd_dvb->users);
+ kref_get(&pd->kref);
+open_out:
+ mutex_unlock(&pd->lock);
+ } else {
+ dvb_stop_streaming(pd_dvb);
+
+ if (atomic_dec_and_test(&pd_dvb->users)) {
+ mutex_lock(&pd->lock);
+ pd->state &= ~POSEIDON_STATE_DVBT;
+ mutex_unlock(&pd->lock);
+ }
+ kref_put(&pd->kref, poseidon_delete);
+ usb_autopm_put_interface(pd->interface);
+ }
+ return ret;
+}
+
+static void poseidon_fe_release(struct dvb_frontend *fe)
+{
+ struct poseidon *pd = fe->demodulator_priv;
+
+#ifdef CONFIG_PM
+ pd->pm_suspend = NULL;
+ pd->pm_resume = NULL;
+#endif
+}
+
+static s32 poseidon_fe_sleep(struct dvb_frontend *fe)
+{
+ return 0;
+}
+
+/*
+ * return true if we can satisfy the conditions, else return false.
+ */
+static bool check_scan_ok(__u32 freq, int bandwidth,
+ struct pd_dvb_adapter *adapter)
+{
+ if (bandwidth < 0)
+ return false;
+
+ if (adapter->prev_freq == freq
+ && adapter->bandwidth == bandwidth) {
+ long nl = jiffies - adapter->last_jiffies;
+ unsigned int msec ;
+
+ msec = jiffies_to_msecs(abs(nl));
+ return msec > 15000 ? true : false;
+ }
+ return true;
+}
+
+/*
+ * Check if the firmware delays too long for an invalid frequency.
+ */
+static int fw_delay_overflow(struct pd_dvb_adapter *adapter)
+{
+ long nl = jiffies - adapter->last_jiffies;
+ unsigned int msec ;
+
+ msec = jiffies_to_msecs(abs(nl));
+ return msec > 800 ? true : false;
+}
+
+static int poseidon_set_fe(struct dvb_frontend *fe,
+ struct dvb_frontend_parameters *fep)
+{
+ s32 ret = 0, cmd_status = 0;
+ s32 i, bandwidth = -1;
+ struct poseidon *pd = fe->demodulator_priv;
+ struct pd_dvb_adapter *pd_dvb = &pd->dvb_data;
+
+ if (in_hibernation(pd))
+ return -EBUSY;
+
+ mutex_lock(&pd->lock);
+ for (i = 0; i < dvb_bandwidth_length; i++)
+ if (fep->u.ofdm.bandwidth == dvb_bandwidth[i][1])
+ bandwidth = dvb_bandwidth[i][0];
+
+ if (check_scan_ok(fep->frequency, bandwidth, pd_dvb)) {
+ ret = send_set_req(pd, TUNE_FREQ_SELECT,
+ fep->frequency / 1000, &cmd_status);
+ if (ret | cmd_status) {
+ log("error line");
+ goto front_out;
+ }
+
+ ret = send_set_req(pd, DVBT_BANDW_SEL,
+ bandwidth, &cmd_status);
+ if (ret | cmd_status) {
+ log("error line");
+ goto front_out;
+ }
+
+ ret = send_set_req(pd, TAKE_REQUEST, 0, &cmd_status);
+ if (ret | cmd_status) {
+ log("error line");
+ goto front_out;
+ }
+
+ /* save the context for future */
+ memcpy(&pd_dvb->fe_param, fep, sizeof(*fep));
+ pd_dvb->bandwidth = bandwidth;
+ pd_dvb->prev_freq = fep->frequency;
+ pd_dvb->last_jiffies = jiffies;
+ }
+front_out:
+ mutex_unlock(&pd->lock);
+ return ret;
+}
+
+#ifdef CONFIG_PM
+static int pm_dvb_suspend(struct poseidon *pd)
+{
+ struct pd_dvb_adapter *pd_dvb = &pd->dvb_data;
+ dvb_stop_streaming(pd_dvb);
+ dvb_urb_cleanup(pd_dvb);
+ msleep(500);
+ return 0;
+}
+
+static int pm_dvb_resume(struct poseidon *pd)
+{
+ struct pd_dvb_adapter *pd_dvb = &pd->dvb_data;
+
+ poseidon_check_mode_dvbt(pd);
+ msleep(300);
+ poseidon_set_fe(&pd_dvb->dvb_fe, &pd_dvb->fe_param);
+
+ dvb_start_streaming(pd_dvb);
+ return 0;
+}
+#endif
+
+static s32 poseidon_fe_init(struct dvb_frontend *fe)
+{
+ struct poseidon *pd = fe->demodulator_priv;
+ struct pd_dvb_adapter *pd_dvb = &pd->dvb_data;
+
+#ifdef CONFIG_PM
+ pd->pm_suspend = pm_dvb_suspend;
+ pd->pm_resume = pm_dvb_resume;
+#endif
+ memset(&pd_dvb->fe_param, 0,
+ sizeof(struct dvb_frontend_parameters));
+ return 0;
+}
+
+static int poseidon_get_fe(struct dvb_frontend *fe,
+ struct dvb_frontend_parameters *fep)
+{
+ struct poseidon *pd = fe->demodulator_priv;
+ struct pd_dvb_adapter *pd_dvb = &pd->dvb_data;
+
+ memcpy(fep, &pd_dvb->fe_param, sizeof(*fep));
+ return 0;
+}
+
+static int poseidon_fe_get_tune_settings(struct dvb_frontend *fe,
+ struct dvb_frontend_tune_settings *tune)
+{
+ tune->min_delay_ms = 1000;
+ return 0;
+}
+
+static int poseidon_read_status(struct dvb_frontend *fe, fe_status_t *stat)
+{
+ struct poseidon *pd = fe->demodulator_priv;
+ s32 ret = -1, cmd_status;
+ struct tuner_dtv_sig_stat_s status = {};
+
+ if (in_hibernation(pd))
+ return -EBUSY;
+ mutex_lock(&pd->lock);
+
+ ret = send_get_req(pd, TUNER_STATUS, TLG_MODE_DVB_T,
+ &status, &cmd_status, sizeof(status));
+ if (ret | cmd_status) {
+ log("get tuner status error");
+ goto out;
+ }
+
+ if (debug_mode)
+ log("P : %d, L %d, LB :%d", status.sig_present,
+ status.sig_locked, status.sig_lock_busy);
+
+ if (status.sig_lock_busy) {
+ goto out;
+ } else if (status.sig_present || status.sig_locked) {
+ *stat |= FE_HAS_LOCK | FE_HAS_SIGNAL | FE_HAS_CARRIER
+ | FE_HAS_SYNC | FE_HAS_VITERBI;
+ } else {
+ if (fw_delay_overflow(&pd->dvb_data))
+ *stat |= FE_TIMEDOUT;
+ }
+out:
+ mutex_unlock(&pd->lock);
+ return ret;
+}
+
+static int poseidon_read_ber(struct dvb_frontend *fe, u32 *ber)
+{
+ struct poseidon *pd = fe->demodulator_priv;
+ struct tuner_ber_rate_s tlg_ber = {};
+ s32 ret = -1, cmd_status;
+
+ mutex_lock(&pd->lock);
+ ret = send_get_req(pd, TUNER_BER_RATE, 0,
+ &tlg_ber, &cmd_status, sizeof(tlg_ber));
+ if (ret | cmd_status)
+ goto out;
+ *ber = tlg_ber.ber_rate;
+out:
+ mutex_unlock(&pd->lock);
+ return ret;
+}
+
+static s32 poseidon_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
+{
+ struct poseidon *pd = fe->demodulator_priv;
+ struct tuner_dtv_sig_stat_s status = {};
+ s32 ret = 0, cmd_status;
+
+ mutex_lock(&pd->lock);
+ ret = send_get_req(pd, TUNER_STATUS, TLG_MODE_DVB_T,
+ &status, &cmd_status, sizeof(status));
+ if (ret | cmd_status)
+ goto out;
+ if ((status.sig_present || status.sig_locked) && !status.sig_strength)
+ *strength = 0xFFFF;
+ else
+ *strength = status.sig_strength;
+out:
+ mutex_unlock(&pd->lock);
+ return ret;
+}
+
+static int poseidon_read_snr(struct dvb_frontend *fe, u16 *snr)
+{
+ return 0;
+}
+
+static int poseidon_read_unc_blocks(struct dvb_frontend *fe, u32 *unc)
+{
+ *unc = 0;
+ return 0;
+}
+
+static struct dvb_frontend_ops poseidon_frontend_ops = {
+ .info = {
+ .name = "Poseidon DVB-T",
+ .type = FE_OFDM,
+ .frequency_min = 174000000,
+ .frequency_max = 862000000,
+ .frequency_stepsize = 62500,/* FIXME */
+ .caps = FE_CAN_INVERSION_AUTO |
+ FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
+ FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
+ FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 |
+ FE_CAN_QAM_AUTO | FE_CAN_TRANSMISSION_MODE_AUTO |
+ FE_CAN_GUARD_INTERVAL_AUTO |
+ FE_CAN_RECOVER |
+ FE_CAN_HIERARCHY_AUTO,
+ },
+
+ .release = poseidon_fe_release,
+
+ .init = poseidon_fe_init,
+ .sleep = poseidon_fe_sleep,
+
+ .set_frontend = poseidon_set_fe,
+ .get_frontend = poseidon_get_fe,
+ .get_tune_settings = poseidon_fe_get_tune_settings,
+
+ .read_status = poseidon_read_status,
+ .read_ber = poseidon_read_ber,
+ .read_signal_strength = poseidon_read_signal_strength,
+ .read_snr = poseidon_read_snr,
+ .read_ucblocks = poseidon_read_unc_blocks,
+
+ .ts_bus_ctrl = poseidon_ts_bus_ctrl,
+};
+
+static void dvb_urb_irq(struct urb *urb)
+{
+ struct pd_dvb_adapter *pd_dvb = urb->context;
+ int len = urb->transfer_buffer_length;
+ struct dvb_demux *demux = &pd_dvb->demux;
+ s32 ret;
+
+ if (!pd_dvb->is_streaming || urb->status) {
+ if (urb->status == -EPROTO)
+ goto resend;
+ return;
+ }
+
+ if (urb->actual_length == len)
+ dvb_dmx_swfilter(demux, urb->transfer_buffer, len);
+ else if (urb->actual_length == len - 4) {
+ int offset;
+ u8 *buf = urb->transfer_buffer;
+
+ /*
+ * The packet size is 512,
+ * last packet contains 456 bytes tsp data
+ */
+ for (offset = 456; offset < len; offset += 512) {
+ if (!strncmp(buf + offset, "DVHS", 4)) {
+ dvb_dmx_swfilter(demux, buf, offset);
+ if (len > offset + 52 + 4) {
+ /*16 bytes trailer + 36 bytes padding */
+ buf += offset + 52;
+ len -= offset + 52 + 4;
+ dvb_dmx_swfilter(demux, buf, len);
+ }
+ break;
+ }
+ }
+ }
+
+resend:
+ ret = usb_submit_urb(urb, GFP_ATOMIC);
+ if (ret)
+ log(" usb_submit_urb failed: error %d", ret);
+}
+
+static int dvb_urb_init(struct pd_dvb_adapter *pd_dvb)
+{
+ if (pd_dvb->urb_array[0])
+ return 0;
+
+ alloc_bulk_urbs_generic(pd_dvb->urb_array, DVB_SBUF_NUM,
+ pd_dvb->pd_device->udev, pd_dvb->ep_addr,
+ DVB_URB_BUF_SIZE, GFP_KERNEL,
+ dvb_urb_irq, pd_dvb);
+ return 0;
+}
+
+static void dvb_urb_cleanup(struct pd_dvb_adapter *pd_dvb)
+{
+ free_all_urb_generic(pd_dvb->urb_array, DVB_SBUF_NUM);
+}
+
+static s32 dvb_start_streaming(struct pd_dvb_adapter *pd_dvb)
+{
+ struct poseidon *pd = pd_dvb->pd_device;
+ int ret = 0;
+
+ if (pd->state & POSEIDON_STATE_DISCONNECT)
+ return -ENODEV;
+
+ mutex_lock(&pd->lock);
+ if (!pd_dvb->is_streaming) {
+ s32 i, cmd_status = 0;
+ /*
+ * Once upon a time, there was a difficult bug lying here.
+ * ret = send_set_req(pd, TAKE_REQUEST, 0, &cmd_status);
+ */
+
+ ret = send_set_req(pd, PLAY_SERVICE, 1, &cmd_status);
+ if (ret | cmd_status)
+ goto out;
+
+ ret = dvb_urb_init(pd_dvb);
+ if (ret < 0)
+ goto out;
+
+ pd_dvb->is_streaming = 1;
+ for (i = 0; i < DVB_SBUF_NUM; i++) {
+ ret = usb_submit_urb(pd_dvb->urb_array[i],
+ GFP_KERNEL);
+ if (ret) {
+ log(" submit urb error %d", ret);
+ goto out;
+ }
+ }
+ }
+out:
+ mutex_unlock(&pd->lock);
+ return ret;
+}
+
+void dvb_stop_streaming(struct pd_dvb_adapter *pd_dvb)
+{
+ struct poseidon *pd = pd_dvb->pd_device;
+
+ mutex_lock(&pd->lock);
+ if (pd_dvb->is_streaming) {
+ s32 i, ret, cmd_status = 0;
+
+ pd_dvb->is_streaming = 0;
+
+ for (i = 0; i < DVB_SBUF_NUM; i++)
+ if (pd_dvb->urb_array[i])
+ usb_kill_urb(pd_dvb->urb_array[i]);
+
+ ret = send_set_req(pd, PLAY_SERVICE, TLG_TUNE_PLAY_SVC_STOP,
+ &cmd_status);
+ if (ret | cmd_status)
+ log("error");
+ }
+ mutex_unlock(&pd->lock);
+}
+
+static int pd_start_feed(struct dvb_demux_feed *feed)
+{
+ struct pd_dvb_adapter *pd_dvb = feed->demux->priv;
+ int ret = 0;
+
+ if (!pd_dvb)
+ return -1;
+ if (atomic_inc_return(&pd_dvb->active_feed) == 1)
+ ret = dvb_start_streaming(pd_dvb);
+ return ret;
+}
+
+static int pd_stop_feed(struct dvb_demux_feed *feed)
+{
+ struct pd_dvb_adapter *pd_dvb = feed->demux->priv;
+
+ if (!pd_dvb)
+ return -1;
+ if (atomic_dec_and_test(&pd_dvb->active_feed))
+ dvb_stop_streaming(pd_dvb);
+ return 0;
+}
+
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+int pd_dvb_usb_device_init(struct poseidon *pd)
+{
+ struct pd_dvb_adapter *pd_dvb = &pd->dvb_data;
+ struct dvb_demux *dvbdemux;
+ int ret = 0;
+
+ pd_dvb->ep_addr = 0x82;
+ atomic_set(&pd_dvb->users, 0);
+ atomic_set(&pd_dvb->active_feed, 0);
+ pd_dvb->pd_device = pd;
+
+ ret = dvb_register_adapter(&pd_dvb->dvb_adap,
+ "Poseidon dvbt adapter",
+ THIS_MODULE,
+ NULL /* for hibernation correctly*/,
+ adapter_nr);
+ if (ret < 0)
+ goto error1;
+
+ /* register frontend */
+ pd_dvb->dvb_fe.demodulator_priv = pd;
+ memcpy(&pd_dvb->dvb_fe.ops, &poseidon_frontend_ops,
+ sizeof(struct dvb_frontend_ops));
+ ret = dvb_register_frontend(&pd_dvb->dvb_adap, &pd_dvb->dvb_fe);
+ if (ret < 0)
+ goto error2;
+
+ /* register demux device */
+ dvbdemux = &pd_dvb->demux;
+ dvbdemux->dmx.capabilities = DMX_TS_FILTERING | DMX_SECTION_FILTERING;
+ dvbdemux->priv = pd_dvb;
+ dvbdemux->feednum = dvbdemux->filternum = 64;
+ dvbdemux->start_feed = pd_start_feed;
+ dvbdemux->stop_feed = pd_stop_feed;
+ dvbdemux->write_to_decoder = NULL;
+
+ ret = dvb_dmx_init(dvbdemux);
+ if (ret < 0)
+ goto error3;
+
+ pd_dvb->dmxdev.filternum = pd_dvb->demux.filternum;
+ pd_dvb->dmxdev.demux = &pd_dvb->demux.dmx;
+ pd_dvb->dmxdev.capabilities = 0;
+
+ ret = dvb_dmxdev_init(&pd_dvb->dmxdev, &pd_dvb->dvb_adap);
+ if (ret < 0)
+ goto error3;
+ return 0;
+
+error3:
+ dvb_unregister_frontend(&pd_dvb->dvb_fe);
+error2:
+ dvb_unregister_adapter(&pd_dvb->dvb_adap);
+error1:
+ return ret;
+}
+
+void pd_dvb_usb_device_exit(struct poseidon *pd)
+{
+ struct pd_dvb_adapter *pd_dvb = &pd->dvb_data;
+
+ while (atomic_read(&pd_dvb->users) != 0
+ || atomic_read(&pd_dvb->active_feed) != 0) {
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(HZ);
+ }
+ dvb_dmxdev_release(&pd_dvb->dmxdev);
+ dvb_unregister_frontend(&pd_dvb->dvb_fe);
+ dvb_unregister_adapter(&pd_dvb->dvb_adap);
+ pd_dvb_usb_device_cleanup(pd);
+}
+
+void pd_dvb_usb_device_cleanup(struct poseidon *pd)
+{
+ struct pd_dvb_adapter *pd_dvb = &pd->dvb_data;
+
+ dvb_urb_cleanup(pd_dvb);
+}
+
+int pd_dvb_get_adapter_num(struct pd_dvb_adapter *pd_dvb)
+{
+ return pd_dvb->dvb_adap.num;
+}
diff --git a/drivers/media/video/tlg2300/pd-main.c b/drivers/media/video/tlg2300/pd-main.c
new file mode 100644
index 0000000..2cf0ebf
--- /dev/null
+++ b/drivers/media/video/tlg2300/pd-main.c
@@ -0,0 +1,539 @@
+/*
+ * device driver for Telegent tlg2300 based TV cards
+ *
+ * Author :
+ * Kang Yong <kangyong@telegent.com>
+ * Zhang Xiaobing <xbzhang@telegent.com>
+ * Huang Shijie <zyziii@telegent.com> or <shijie8@gmail.com>
+ *
+ * (c) 2009 Telegent Systems
+ * (c) 2010 Telegent Systems
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/kref.h>
+#include <linux/suspend.h>
+#include <linux/usb/quirks.h>
+#include <linux/ctype.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/firmware.h>
+#include <linux/smp_lock.h>
+
+#include "vendorcmds.h"
+#include "pd-common.h"
+
+#define VENDOR_ID 0x1B24
+#define PRODUCT_ID 0x4001
+static struct usb_device_id id_table[] = {
+ { USB_DEVICE_AND_INTERFACE_INFO(VENDOR_ID, PRODUCT_ID, 255, 1, 0) },
+ { USB_DEVICE_AND_INTERFACE_INFO(VENDOR_ID, PRODUCT_ID, 255, 1, 1) },
+ { },
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+int debug_mode;
+module_param(debug_mode, int, 0644);
+MODULE_PARM_DESC(debug_mode, "0 = disable, 1 = enable, 2 = verbose");
+
+const char *firmware_name = "tlg2300_firmware.bin";
+struct usb_driver poseidon_driver;
+static LIST_HEAD(pd_device_list);
+
+/*
+ * send set request to USB firmware.
+ */
+s32 send_set_req(struct poseidon *pd, u8 cmdid, s32 param, s32 *cmd_status)
+{
+ s32 ret;
+ s8 data[32] = {};
+ u16 lower_16, upper_16;
+
+ if (pd->state & POSEIDON_STATE_DISCONNECT)
+ return -ENODEV;
+
+ mdelay(30);
+
+ if (param == 0) {
+ upper_16 = lower_16 = 0;
+ } else {
+ /* send 32 bit param as two 16 bit param,little endian */
+ lower_16 = (unsigned short)(param & 0xffff);
+ upper_16 = (unsigned short)((param >> 16) & 0xffff);
+ }
+ ret = usb_control_msg(pd->udev,
+ usb_rcvctrlpipe(pd->udev, 0),
+ REQ_SET_CMD | cmdid,
+ USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ lower_16,
+ upper_16,
+ &data,
+ sizeof(*cmd_status),
+ USB_CTRL_GET_TIMEOUT);
+
+ if (!ret) {
+ return -ENXIO;
+ } else {
+ /* 1st 4 bytes into cmd_status */
+ memcpy((char *)cmd_status, &(data[0]), sizeof(*cmd_status));
+ }
+ return 0;
+}
+
+/*
+ * send get request to Poseidon firmware.
+ */
+s32 send_get_req(struct poseidon *pd, u8 cmdid, s32 param,
+ void *buf, s32 *cmd_status, s32 datalen)
+{
+ s32 ret;
+ s8 data[128] = {};
+ u16 lower_16, upper_16;
+
+ if (pd->state & POSEIDON_STATE_DISCONNECT)
+ return -ENODEV;
+
+ mdelay(30);
+ if (param == 0) {
+ upper_16 = lower_16 = 0;
+ } else {
+ /*send 32 bit param as two 16 bit param, little endian */
+ lower_16 = (unsigned short)(param & 0xffff);
+ upper_16 = (unsigned short)((param >> 16) & 0xffff);
+ }
+ ret = usb_control_msg(pd->udev,
+ usb_rcvctrlpipe(pd->udev, 0),
+ REQ_GET_CMD | cmdid,
+ USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ lower_16,
+ upper_16,
+ &data,
+ (datalen + sizeof(*cmd_status)),
+ USB_CTRL_GET_TIMEOUT);
+
+ if (ret < 0) {
+ return -ENXIO;
+ } else {
+ /* 1st 4 bytes into cmd_status, remaining data into cmd_data */
+ memcpy((char *)cmd_status, &data[0], sizeof(*cmd_status));
+ memcpy((char *)buf, &data[sizeof(*cmd_status)], datalen);
+ }
+ return 0;
+}
+
+static int pm_notifier_block(struct notifier_block *nb,
+ unsigned long event, void *dummy)
+{
+ struct poseidon *pd = NULL;
+ struct list_head *node, *next;
+
+ switch (event) {
+ case PM_POST_HIBERNATION:
+ list_for_each_safe(node, next, &pd_device_list) {
+ struct usb_device *udev;
+ struct usb_interface *iface;
+ int rc = 0;
+
+ pd = container_of(node, struct poseidon, device_list);
+ udev = pd->udev;
+ iface = pd->interface;
+
+ /* It will cause the system to reload the firmware */
+ rc = usb_lock_device_for_reset(udev, iface);
+ if (rc >= 0) {
+ usb_reset_device(udev);
+ usb_unlock_device(udev);
+ }
+ }
+ break;
+ default:
+ break;
+ }
+ log("event :%ld\n", event);
+ return 0;
+}
+
+static struct notifier_block pm_notifer = {
+ .notifier_call = pm_notifier_block,
+};
+
+int set_tuner_mode(struct poseidon *pd, unsigned char mode)
+{
+ s32 ret, cmd_status;
+
+ if (pd->state & POSEIDON_STATE_DISCONNECT)
+ return -ENODEV;
+
+ ret = send_set_req(pd, TUNE_MODE_SELECT, mode, &cmd_status);
+ if (ret || cmd_status)
+ return -ENXIO;
+ return 0;
+}
+
+void poseidon_delete(struct kref *kref)
+{
+ struct poseidon *pd = container_of(kref, struct poseidon, kref);
+
+ if (!pd)
+ return;
+ list_del_init(&pd->device_list);
+
+ pd_dvb_usb_device_cleanup(pd);
+ /* clean_audio_data(&pd->audio_data);*/
+
+ if (pd->udev) {
+ usb_put_dev(pd->udev);
+ pd->udev = NULL;
+ }
+ if (pd->interface) {
+ usb_put_intf(pd->interface);
+ pd->interface = NULL;
+ }
+ kfree(pd);
+ log();
+}
+
+static int firmware_download(struct usb_device *udev)
+{
+ int ret = 0, actual_length;
+ const struct firmware *fw = NULL;
+ void *fwbuf = NULL;
+ size_t fwlength = 0, offset;
+ size_t max_packet_size;
+
+ ret = request_firmware(&fw, firmware_name, &udev->dev);
+ if (ret) {
+ log("download err : %d", ret);
+ return ret;
+ }
+
+ fwlength = fw->size;
+
+ fwbuf = kzalloc(fwlength, GFP_KERNEL);
+ if (!fwbuf) {
+ ret = -ENOMEM;
+ goto out;
+ }
+ memcpy(fwbuf, fw->data, fwlength);
+
+ max_packet_size = udev->ep_out[0x1]->desc.wMaxPacketSize;
+ log("\t\t download size : %d", (int)max_packet_size);
+
+ for (offset = 0; offset < fwlength; offset += max_packet_size) {
+ actual_length = 0;
+ ret = usb_bulk_msg(udev,
+ usb_sndbulkpipe(udev, 0x01), /* ep 1 */
+ fwbuf + offset,
+ min(max_packet_size, fwlength - offset),
+ &actual_length,
+ HZ * 10);
+ if (ret)
+ break;
+ }
+ kfree(fwbuf);
+out:
+ release_firmware(fw);
+ return ret;
+}
+
+static inline struct poseidon *get_pd(struct usb_interface *intf)
+{
+ return usb_get_intfdata(intf);
+}
+
+#ifdef CONFIG_PM
+/* one-to-one map : poseidon{} <----> usb_device{}'s port */
+static inline void set_map_flags(struct poseidon *pd, struct usb_device *udev)
+{
+ pd->portnum = udev->portnum;
+}
+
+static inline int get_autopm_ref(struct poseidon *pd)
+{
+ return pd->video_data.users + pd->vbi_data.users + pd->audio.users
+ + atomic_read(&pd->dvb_data.users) + pd->radio_data.users;
+}
+
+/* fixup something for poseidon */
+static inline struct poseidon *fixup(struct poseidon *pd)
+{
+ int count;
+
+ /* old udev and interface have gone, so put back reference . */
+ count = get_autopm_ref(pd);
+ log("count : %d, ref count : %d", count, get_pm_count(pd));
+ while (count--)
+ usb_autopm_put_interface(pd->interface);
+ /*usb_autopm_set_interface(pd->interface); */
+
+ usb_put_dev(pd->udev);
+ usb_put_intf(pd->interface);
+ log("event : %d\n", pd->msg.event);
+ return pd;
+}
+
+static struct poseidon *find_old_poseidon(struct usb_device *udev)
+{
+ struct poseidon *pd;
+
+ list_for_each_entry(pd, &pd_device_list, device_list) {
+ if (pd->portnum == udev->portnum && in_hibernation(pd))
+ return fixup(pd);
+ }
+ return NULL;
+}
+
+/* Is the card working now ? */
+static inline int is_working(struct poseidon *pd)
+{
+ return get_pm_count(pd) > 0;
+}
+
+static int poseidon_suspend(struct usb_interface *intf, pm_message_t msg)
+{
+ struct poseidon *pd = get_pd(intf);
+
+ if (!pd)
+ return 0;
+ if (!is_working(pd)) {
+ if (get_pm_count(pd) <= 0 && !in_hibernation(pd)) {
+ pd->msg.event = PM_EVENT_AUTO_SUSPEND;
+ pd->pm_resume = NULL; /* a good guard */
+ printk(KERN_DEBUG "\n\t+ TLG2300 auto suspend +\n\n");
+ }
+ return 0;
+ }
+ pd->msg = msg; /* save it here */
+ logpm(pd);
+ return pd->pm_suspend ? pd->pm_suspend(pd) : 0;
+}
+
+static int poseidon_resume(struct usb_interface *intf)
+{
+ struct poseidon *pd = get_pd(intf);
+
+ if (!pd)
+ return 0;
+ printk(KERN_DEBUG "\n\t ++ TLG2300 resume ++\n\n");
+
+ if (!is_working(pd)) {
+ if (PM_EVENT_AUTO_SUSPEND == pd->msg.event)
+ pd->msg = PMSG_ON;
+ return 0;
+ }
+ if (in_hibernation(pd)) {
+ logpm(pd);
+ return 0;
+ }
+ logpm(pd);
+ return pd->pm_resume ? pd->pm_resume(pd) : 0;
+}
+
+static void hibernation_resume(struct work_struct *w)
+{
+ struct poseidon *pd = container_of(w, struct poseidon, pm_work);
+ int count;
+
+ pd->msg.event = 0; /* clear it here */
+ pd->state &= ~POSEIDON_STATE_DISCONNECT;
+
+ /* set the new interface's reference */
+ count = get_autopm_ref(pd);
+ while (count--)
+ usb_autopm_get_interface(pd->interface);
+
+ /* resume the context */
+ logpm(pd);
+ if (pd->pm_resume)
+ pd->pm_resume(pd);
+}
+#else /* CONFIG_PM is not enabled: */
+static inline struct poseidon *find_old_poseidon(struct usb_device *udev)
+{
+ return NULL;
+}
+
+static inline void set_map_flags(struct poseidon *pd, struct usb_device *udev)
+{
+}
+#endif
+
+static bool check_firmware(struct usb_device *udev, int *down_firmware)
+{
+ void *buf;
+ int ret;
+ struct cmd_firmware_vers_s *cmd_firm;
+
+ buf = kzalloc(sizeof(*cmd_firm) + sizeof(u32), GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+ ret = usb_control_msg(udev,
+ usb_rcvctrlpipe(udev, 0),
+ REQ_GET_CMD | GET_FW_ID,
+ USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ 0,
+ 0,
+ buf,
+ sizeof(*cmd_firm) + sizeof(u32),
+ USB_CTRL_GET_TIMEOUT);
+ kfree(buf);
+
+ if (ret < 0) {
+ *down_firmware = 1;
+ return firmware_download(udev);
+ }
+ return ret;
+}
+
+static int poseidon_probe(struct usb_interface *interface,
+ const struct usb_device_id *id)
+{
+ struct usb_device *udev = interface_to_usbdev(interface);
+ struct poseidon *pd = NULL;
+ int ret = 0;
+ int new_one = 0;
+
+ /* download firmware */
+ check_firmware(udev, &ret);
+ if (ret)
+ return 0;
+
+ /* Do I recovery from the hibernate ? */
+ pd = find_old_poseidon(udev);
+ if (!pd) {
+ pd = kzalloc(sizeof(*pd), GFP_KERNEL);
+ if (!pd)
+ return -ENOMEM;
+ kref_init(&pd->kref);
+ set_map_flags(pd, udev);
+ new_one = 1;
+ }
+
+ pd->udev = usb_get_dev(udev);
+ pd->interface = usb_get_intf(interface);
+ usb_set_intfdata(interface, pd);
+
+ if (new_one) {
+ struct device *dev = &interface->dev;
+
+ logpm(pd);
+ mutex_init(&pd->lock);
+
+ /* register v4l2 device */
+ snprintf(pd->v4l2_dev.name, sizeof(pd->v4l2_dev.name), "%s %s",
+ dev->driver->name, dev_name(dev));
+ ret = v4l2_device_register(NULL, &pd->v4l2_dev);
+
+ /* register devices in directory /dev */
+ ret = pd_video_init(pd);
+ poseidon_audio_init(pd);
+ poseidon_fm_init(pd);
+ pd_dvb_usb_device_init(pd);
+
+ INIT_LIST_HEAD(&pd->device_list);
+ list_add_tail(&pd->device_list, &pd_device_list);
+ }
+
+ device_init_wakeup(&udev->dev, 1);
+#ifdef CONFIG_PM
+ pd->udev->autosuspend_disabled = 0;
+ pd->udev->autosuspend_delay = HZ * PM_SUSPEND_DELAY;
+
+ if (in_hibernation(pd)) {
+ INIT_WORK(&pd->pm_work, hibernation_resume);
+ schedule_work(&pd->pm_work);
+ }
+#endif
+ return 0;
+}
+
+static void poseidon_disconnect(struct usb_interface *interface)
+{
+ struct poseidon *pd = get_pd(interface);
+
+ if (!pd)
+ return;
+ logpm(pd);
+ if (in_hibernation(pd))
+ return;
+
+ mutex_lock(&pd->lock);
+ pd->state |= POSEIDON_STATE_DISCONNECT;
+ mutex_unlock(&pd->lock);
+
+ /* stop urb transferring */
+ stop_all_video_stream(pd);
+ dvb_stop_streaming(&pd->dvb_data);
+
+ /*unregister v4l2 device */
+ v4l2_device_unregister(&pd->v4l2_dev);
+
+ lock_kernel();
+ {
+ pd_dvb_usb_device_exit(pd);
+ poseidon_fm_exit(pd);
+
+ poseidon_audio_free(pd);
+ pd_video_exit(pd);
+ }
+ unlock_kernel();
+
+ usb_set_intfdata(interface, NULL);
+ kref_put(&pd->kref, poseidon_delete);
+}
+
+struct usb_driver poseidon_driver = {
+ .name = "poseidon",
+ .probe = poseidon_probe,
+ .disconnect = poseidon_disconnect,
+ .id_table = id_table,
+#ifdef CONFIG_PM
+ .suspend = poseidon_suspend,
+ .resume = poseidon_resume,
+#endif
+ .supports_autosuspend = 1,
+};
+
+static int __init poseidon_init(void)
+{
+ int ret;
+
+ ret = usb_register(&poseidon_driver);
+ if (ret)
+ return ret;
+ register_pm_notifier(&pm_notifer);
+ return ret;
+}
+
+static void __exit poseidon_exit(void)
+{
+ log();
+ unregister_pm_notifier(&pm_notifer);
+ usb_deregister(&poseidon_driver);
+}
+
+module_init(poseidon_init);
+module_exit(poseidon_exit);
+
+MODULE_AUTHOR("Telegent Systems");
+MODULE_DESCRIPTION("For tlg2300-based USB device ");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/video/tlg2300/pd-radio.c b/drivers/media/video/tlg2300/pd-radio.c
new file mode 100644
index 0000000..755766b1
--- /dev/null
+++ b/drivers/media/video/tlg2300/pd-radio.c
@@ -0,0 +1,420 @@
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/bitmap.h>
+#include <linux/usb.h>
+#include <linux/i2c.h>
+#include <media/v4l2-dev.h>
+#include <linux/version.h>
+#include <linux/mm.h>
+#include <linux/mutex.h>
+#include <media/v4l2-ioctl.h>
+#include <linux/sched.h>
+
+#include "pd-common.h"
+#include "vendorcmds.h"
+
+static int set_frequency(struct poseidon *p, __u32 frequency);
+static int poseidon_fm_close(struct file *filp);
+static int poseidon_fm_open(struct file *filp);
+
+#define TUNER_FREQ_MIN_FM 76000000
+#define TUNER_FREQ_MAX_FM 108000000
+
+#define MAX_PREEMPHASIS (V4L2_PREEMPHASIS_75_uS + 1)
+static int preemphasis[MAX_PREEMPHASIS] = {
+ TLG_TUNE_ASTD_NONE, /* V4L2_PREEMPHASIS_DISABLED */
+ TLG_TUNE_ASTD_FM_EUR, /* V4L2_PREEMPHASIS_50_uS */
+ TLG_TUNE_ASTD_FM_US, /* V4L2_PREEMPHASIS_75_uS */
+};
+
+static int poseidon_check_mode_radio(struct poseidon *p)
+{
+ int ret;
+ u32 status;
+
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(HZ/2);
+ ret = usb_set_interface(p->udev, 0, BULK_ALTERNATE_IFACE);
+ if (ret < 0)
+ goto out;
+
+ ret = set_tuner_mode(p, TLG_MODE_FM_RADIO);
+ if (ret != 0)
+ goto out;
+
+ ret = send_set_req(p, SGNL_SRC_SEL, TLG_SIG_SRC_ANTENNA, &status);
+ ret = send_set_req(p, TUNER_AUD_ANA_STD,
+ p->radio_data.pre_emphasis, &status);
+ ret |= send_set_req(p, TUNER_AUD_MODE,
+ TLG_TUNE_TVAUDIO_MODE_STEREO, &status);
+ ret |= send_set_req(p, AUDIO_SAMPLE_RATE_SEL,
+ ATV_AUDIO_RATE_48K, &status);
+ ret |= send_set_req(p, TUNE_FREQ_SELECT, TUNER_FREQ_MIN_FM, &status);
+out:
+ return ret;
+}
+
+#ifdef CONFIG_PM
+static int pm_fm_suspend(struct poseidon *p)
+{
+ logpm(p);
+ pm_alsa_suspend(p);
+ usb_set_interface(p->udev, 0, 0);
+ msleep(300);
+ return 0;
+}
+
+static int pm_fm_resume(struct poseidon *p)
+{
+ logpm(p);
+ poseidon_check_mode_radio(p);
+ set_frequency(p, p->radio_data.fm_freq);
+ pm_alsa_resume(p);
+ return 0;
+}
+#endif
+
+static int poseidon_fm_open(struct file *filp)
+{
+ struct video_device *vfd = video_devdata(filp);
+ struct poseidon *p = video_get_drvdata(vfd);
+ int ret = 0;
+
+ if (!p)
+ return -1;
+
+ mutex_lock(&p->lock);
+ if (p->state & POSEIDON_STATE_DISCONNECT) {
+ ret = -ENODEV;
+ goto out;
+ }
+
+ if (p->state && !(p->state & POSEIDON_STATE_FM)) {
+ ret = -EBUSY;
+ goto out;
+ }
+
+ usb_autopm_get_interface(p->interface);
+ if (0 == p->state) {
+ /* default pre-emphasis */
+ if (p->radio_data.pre_emphasis == 0)
+ p->radio_data.pre_emphasis = TLG_TUNE_ASTD_FM_EUR;
+ set_debug_mode(vfd, debug_mode);
+
+ ret = poseidon_check_mode_radio(p);
+ if (ret < 0) {
+ usb_autopm_put_interface(p->interface);
+ goto out;
+ }
+ p->state |= POSEIDON_STATE_FM;
+ }
+ p->radio_data.users++;
+ kref_get(&p->kref);
+ filp->private_data = p;
+out:
+ mutex_unlock(&p->lock);
+ return ret;
+}
+
+static int poseidon_fm_close(struct file *filp)
+{
+ struct poseidon *p = filp->private_data;
+ struct radio_data *fm = &p->radio_data;
+ uint32_t status;
+
+ mutex_lock(&p->lock);
+ fm->users--;
+ if (0 == fm->users)
+ p->state &= ~POSEIDON_STATE_FM;
+
+ if (fm->is_radio_streaming && filp == p->file_for_stream) {
+ fm->is_radio_streaming = 0;
+ send_set_req(p, PLAY_SERVICE, TLG_TUNE_PLAY_SVC_STOP, &status);
+ }
+ usb_autopm_put_interface(p->interface);
+ mutex_unlock(&p->lock);
+
+ kref_put(&p->kref, poseidon_delete);
+ filp->private_data = NULL;
+ return 0;
+}
+
+static int vidioc_querycap(struct file *file, void *priv,
+ struct v4l2_capability *v)
+{
+ struct poseidon *p = file->private_data;
+
+ strlcpy(v->driver, "tele-radio", sizeof(v->driver));
+ strlcpy(v->card, "Telegent Poseidon", sizeof(v->card));
+ usb_make_path(p->udev, v->bus_info, sizeof(v->bus_info));
+ v->version = KERNEL_VERSION(0, 0, 1);
+ v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO;
+ return 0;
+}
+
+static const struct v4l2_file_operations poseidon_fm_fops = {
+ .owner = THIS_MODULE,
+ .open = poseidon_fm_open,
+ .release = poseidon_fm_close,
+ .ioctl = video_ioctl2,
+};
+
+int tlg_fm_vidioc_g_tuner(struct file *file, void *priv, struct v4l2_tuner *vt)
+{
+ struct tuner_fm_sig_stat_s fm_stat = {};
+ int ret, status, count = 5;
+ struct poseidon *p = file->private_data;
+
+ if (vt->index != 0)
+ return -EINVAL;
+
+ vt->type = V4L2_TUNER_RADIO;
+ vt->capability = V4L2_TUNER_CAP_STEREO;
+ vt->rangelow = TUNER_FREQ_MIN_FM / 62500;
+ vt->rangehigh = TUNER_FREQ_MAX_FM / 62500;
+ vt->rxsubchans = V4L2_TUNER_SUB_STEREO;
+ vt->audmode = V4L2_TUNER_MODE_STEREO;
+ vt->signal = 0;
+ vt->afc = 0;
+
+ mutex_lock(&p->lock);
+ ret = send_get_req(p, TUNER_STATUS, TLG_MODE_FM_RADIO,
+ &fm_stat, &status, sizeof(fm_stat));
+
+ while (fm_stat.sig_lock_busy && count-- && !ret) {
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(HZ);
+
+ ret = send_get_req(p, TUNER_STATUS, TLG_MODE_FM_RADIO,
+ &fm_stat, &status, sizeof(fm_stat));
+ }
+ mutex_unlock(&p->lock);
+
+ if (ret || status) {
+ vt->signal = 0;
+ } else if ((fm_stat.sig_present || fm_stat.sig_locked)
+ && fm_stat.sig_strength == 0) {
+ vt->signal = 0xffff;
+ } else
+ vt->signal = (fm_stat.sig_strength * 255 / 10) << 8;
+
+ return 0;
+}
+
+int fm_get_freq(struct file *file, void *priv, struct v4l2_frequency *argp)
+{
+ struct poseidon *p = file->private_data;
+
+ argp->frequency = p->radio_data.fm_freq;
+ return 0;
+}
+
+static int set_frequency(struct poseidon *p, __u32 frequency)
+{
+ __u32 freq ;
+ int ret, status;
+
+ mutex_lock(&p->lock);
+
+ ret = send_set_req(p, TUNER_AUD_ANA_STD,
+ p->radio_data.pre_emphasis, &status);
+
+ freq = (frequency * 125) * 500 / 1000;/* kHZ */
+ if (freq < TUNER_FREQ_MIN_FM/1000 || freq > TUNER_FREQ_MAX_FM/1000) {
+ ret = -EINVAL;
+ goto error;
+ }
+
+ ret = send_set_req(p, TUNE_FREQ_SELECT, freq, &status);
+ if (ret < 0)
+ goto error ;
+ ret = send_set_req(p, TAKE_REQUEST, 0, &status);
+
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(HZ/4);
+ if (!p->radio_data.is_radio_streaming) {
+ ret = send_set_req(p, TAKE_REQUEST, 0, &status);
+ ret = send_set_req(p, PLAY_SERVICE,
+ TLG_TUNE_PLAY_SVC_START, &status);
+ p->radio_data.is_radio_streaming = 1;
+ }
+ p->radio_data.fm_freq = frequency;
+error:
+ mutex_unlock(&p->lock);
+ return ret;
+}
+
+int fm_set_freq(struct file *file, void *priv, struct v4l2_frequency *argp)
+{
+ struct poseidon *p = file->private_data;
+
+ p->file_for_stream = file;
+#ifdef CONFIG_PM
+ p->pm_suspend = pm_fm_suspend;
+ p->pm_resume = pm_fm_resume;
+#endif
+ return set_frequency(p, argp->frequency);
+}
+
+int tlg_fm_vidioc_g_ctrl(struct file *file, void *priv,
+ struct v4l2_control *arg)
+{
+ return 0;
+}
+
+int tlg_fm_vidioc_g_exts_ctrl(struct file *file, void *fh,
+ struct v4l2_ext_controls *ctrls)
+{
+ struct poseidon *p = file->private_data;
+ int i;
+
+ if (ctrls->ctrl_class != V4L2_CTRL_CLASS_FM_TX)
+ return -EINVAL;
+
+ for (i = 0; i < ctrls->count; i++) {
+ struct v4l2_ext_control *ctrl = ctrls->controls + i;
+
+ if (ctrl->id != V4L2_CID_TUNE_PREEMPHASIS)
+ continue;
+
+ if (i < MAX_PREEMPHASIS)
+ ctrl->value = p->radio_data.pre_emphasis;
+ }
+ return 0;
+}
+
+int tlg_fm_vidioc_s_exts_ctrl(struct file *file, void *fh,
+ struct v4l2_ext_controls *ctrls)
+{
+ int i;
+
+ if (ctrls->ctrl_class != V4L2_CTRL_CLASS_FM_TX)
+ return -EINVAL;
+
+ for (i = 0; i < ctrls->count; i++) {
+ struct v4l2_ext_control *ctrl = ctrls->controls + i;
+
+ if (ctrl->id != V4L2_CID_TUNE_PREEMPHASIS)
+ continue;
+
+ if (ctrl->value >= 0 && ctrl->value < MAX_PREEMPHASIS) {
+ struct poseidon *p = file->private_data;
+ int pre_emphasis = preemphasis[ctrl->value];
+ u32 status;
+
+ send_set_req(p, TUNER_AUD_ANA_STD,
+ pre_emphasis, &status);
+ p->radio_data.pre_emphasis = pre_emphasis;
+ }
+ }
+ return 0;
+}
+
+int tlg_fm_vidioc_s_ctrl(struct file *file, void *priv,
+ struct v4l2_control *ctrl)
+{
+ return 0;
+}
+
+int tlg_fm_vidioc_queryctrl(struct file *file, void *priv,
+ struct v4l2_queryctrl *ctrl)
+{
+ if (!(ctrl->id & V4L2_CTRL_FLAG_NEXT_CTRL))
+ return -EINVAL;
+
+ ctrl->id &= ~V4L2_CTRL_FLAG_NEXT_CTRL;
+ if (ctrl->id != V4L2_CID_TUNE_PREEMPHASIS) {
+ /* return the next supported control */
+ ctrl->id = V4L2_CID_TUNE_PREEMPHASIS;
+ v4l2_ctrl_query_fill(ctrl, V4L2_PREEMPHASIS_DISABLED,
+ V4L2_PREEMPHASIS_75_uS, 1,
+ V4L2_PREEMPHASIS_50_uS);
+ ctrl->flags = V4L2_CTRL_FLAG_UPDATE;
+ return 0;
+ }
+ return -EINVAL;
+}
+
+int tlg_fm_vidioc_querymenu(struct file *file, void *fh,
+ struct v4l2_querymenu *qmenu)
+{
+ return v4l2_ctrl_query_menu(qmenu, NULL, NULL);
+}
+
+static int vidioc_s_tuner(struct file *file, void *priv, struct v4l2_tuner *vt)
+{
+ return vt->index > 0 ? -EINVAL : 0;
+}
+static int vidioc_s_audio(struct file *file, void *priv, struct v4l2_audio *va)
+{
+ return (va->index != 0) ? -EINVAL : 0;
+}
+
+static int vidioc_g_audio(struct file *file, void *priv, struct v4l2_audio *a)
+{
+ a->index = 0;
+ a->mode = 0;
+ a->capability = V4L2_AUDCAP_STEREO;
+ strcpy(a->name, "Radio");
+ return 0;
+}
+
+static int vidioc_s_input(struct file *filp, void *priv, u32 i)
+{
+ return (i != 0) ? -EINVAL : 0;
+}
+
+static int vidioc_g_input(struct file *filp, void *priv, u32 *i)
+{
+ return (*i != 0) ? -EINVAL : 0;
+}
+
+static const struct v4l2_ioctl_ops poseidon_fm_ioctl_ops = {
+ .vidioc_querycap = vidioc_querycap,
+ .vidioc_g_audio = vidioc_g_audio,
+ .vidioc_s_audio = vidioc_s_audio,
+ .vidioc_g_input = vidioc_g_input,
+ .vidioc_s_input = vidioc_s_input,
+ .vidioc_queryctrl = tlg_fm_vidioc_queryctrl,
+ .vidioc_querymenu = tlg_fm_vidioc_querymenu,
+ .vidioc_g_ctrl = tlg_fm_vidioc_g_ctrl,
+ .vidioc_s_ctrl = tlg_fm_vidioc_s_ctrl,
+ .vidioc_s_ext_ctrls = tlg_fm_vidioc_s_exts_ctrl,
+ .vidioc_g_ext_ctrls = tlg_fm_vidioc_g_exts_ctrl,
+ .vidioc_s_tuner = vidioc_s_tuner,
+ .vidioc_g_tuner = tlg_fm_vidioc_g_tuner,
+ .vidioc_g_frequency = fm_get_freq,
+ .vidioc_s_frequency = fm_set_freq,
+};
+
+static struct video_device poseidon_fm_template = {
+ .name = "Telegent-Radio",
+ .fops = &poseidon_fm_fops,
+ .minor = -1,
+ .release = video_device_release,
+ .ioctl_ops = &poseidon_fm_ioctl_ops,
+};
+
+int poseidon_fm_init(struct poseidon *p)
+{
+ struct video_device *fm_dev;
+
+ fm_dev = vdev_init(p, &poseidon_fm_template);
+ if (fm_dev == NULL)
+ return -1;
+
+ if (video_register_device(fm_dev, VFL_TYPE_RADIO, -1) < 0) {
+ video_device_release(fm_dev);
+ return -1;
+ }
+ p->radio_data.fm_dev = fm_dev;
+ return 0;
+}
+
+int poseidon_fm_exit(struct poseidon *p)
+{
+ destroy_video_device(&p->radio_data.fm_dev);
+ return 0;
+}
diff --git a/drivers/media/video/tlg2300/pd-video.c b/drivers/media/video/tlg2300/pd-video.c
new file mode 100644
index 0000000..becfba6
--- /dev/null
+++ b/drivers/media/video/tlg2300/pd-video.c
@@ -0,0 +1,1667 @@
+#include <linux/fs.h>
+#include <linux/vmalloc.h>
+#include <linux/videodev2.h>
+#include <linux/usb.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-dev.h>
+
+#include "pd-common.h"
+#include "vendorcmds.h"
+
+static int pm_video_suspend(struct poseidon *pd);
+static int pm_video_resume(struct poseidon *pd);
+static void iso_bubble_handler(struct work_struct *w);
+
+int usb_transfer_mode;
+module_param(usb_transfer_mode, int, 0644);
+MODULE_PARM_DESC(usb_transfer_mode, "0 = Bulk, 1 = Isochronous");
+
+static const struct poseidon_format poseidon_formats[] = {
+ { "YUV 422", V4L2_PIX_FMT_YUYV, 16, 0},
+ { "RGB565", V4L2_PIX_FMT_RGB565, 16, 0},
+};
+
+static const struct poseidon_tvnorm poseidon_tvnorms[] = {
+ { V4L2_STD_PAL_D, "PAL-D", TLG_TUNE_VSTD_PAL_D },
+ { V4L2_STD_PAL_B, "PAL-B", TLG_TUNE_VSTD_PAL_B },
+ { V4L2_STD_PAL_G, "PAL-G", TLG_TUNE_VSTD_PAL_G },
+ { V4L2_STD_PAL_H, "PAL-H", TLG_TUNE_VSTD_PAL_H },
+ { V4L2_STD_PAL_I, "PAL-I", TLG_TUNE_VSTD_PAL_I },
+ { V4L2_STD_PAL_M, "PAL-M", TLG_TUNE_VSTD_PAL_M },
+ { V4L2_STD_PAL_N, "PAL-N", TLG_TUNE_VSTD_PAL_N_COMBO },
+ { V4L2_STD_PAL_Nc, "PAL-Nc", TLG_TUNE_VSTD_PAL_N_COMBO },
+ { V4L2_STD_NTSC_M, "NTSC-M", TLG_TUNE_VSTD_NTSC_M },
+ { V4L2_STD_NTSC_M_JP, "NTSC-JP", TLG_TUNE_VSTD_NTSC_M_J },
+ { V4L2_STD_SECAM_B, "SECAM-B", TLG_TUNE_VSTD_SECAM_B },
+ { V4L2_STD_SECAM_D, "SECAM-D", TLG_TUNE_VSTD_SECAM_D },
+ { V4L2_STD_SECAM_G, "SECAM-G", TLG_TUNE_VSTD_SECAM_G },
+ { V4L2_STD_SECAM_H, "SECAM-H", TLG_TUNE_VSTD_SECAM_H },
+ { V4L2_STD_SECAM_K, "SECAM-K", TLG_TUNE_VSTD_SECAM_K },
+ { V4L2_STD_SECAM_K1, "SECAM-K1", TLG_TUNE_VSTD_SECAM_K1 },
+ { V4L2_STD_SECAM_L, "SECAM-L", TLG_TUNE_VSTD_SECAM_L },
+ { V4L2_STD_SECAM_LC, "SECAM-LC", TLG_TUNE_VSTD_SECAM_L1 },
+};
+static const unsigned int POSEIDON_TVNORMS = ARRAY_SIZE(poseidon_tvnorms);
+
+struct pd_audio_mode {
+ u32 tlg_audio_mode;
+ u32 v4l2_audio_sub;
+ u32 v4l2_audio_mode;
+};
+
+static const struct pd_audio_mode pd_audio_modes[] = {
+ { TLG_TUNE_TVAUDIO_MODE_MONO, V4L2_TUNER_SUB_MONO,
+ V4L2_TUNER_MODE_MONO },
+ { TLG_TUNE_TVAUDIO_MODE_STEREO, V4L2_TUNER_SUB_STEREO,
+ V4L2_TUNER_MODE_STEREO },
+ { TLG_TUNE_TVAUDIO_MODE_LANG_A, V4L2_TUNER_SUB_LANG1,
+ V4L2_TUNER_MODE_LANG1 },
+ { TLG_TUNE_TVAUDIO_MODE_LANG_B, V4L2_TUNER_SUB_LANG2,
+ V4L2_TUNER_MODE_LANG2 },
+ { TLG_TUNE_TVAUDIO_MODE_LANG_C, V4L2_TUNER_SUB_LANG1,
+ V4L2_TUNER_MODE_LANG1_LANG2 }
+};
+static const unsigned int POSEIDON_AUDIOMODS = ARRAY_SIZE(pd_audio_modes);
+
+struct pd_input {
+ char *name;
+ uint32_t tlg_src;
+};
+
+static const struct pd_input pd_inputs[] = {
+ { "TV Antenna", TLG_SIG_SRC_ANTENNA },
+ { "TV Cable", TLG_SIG_SRC_CABLE },
+ { "TV SVideo", TLG_SIG_SRC_SVIDEO },
+ { "TV Composite", TLG_SIG_SRC_COMPOSITE }
+};
+static const unsigned int POSEIDON_INPUTS = ARRAY_SIZE(pd_inputs);
+
+struct poseidon_control {
+ struct v4l2_queryctrl v4l2_ctrl;
+ enum cmd_custom_param_id vc_id;
+};
+
+static struct poseidon_control controls[] = {
+ {
+ { V4L2_CID_BRIGHTNESS, V4L2_CTRL_TYPE_INTEGER,
+ "brightness", 0, 10000, 1, 100, 0, },
+ CUST_PARM_ID_BRIGHTNESS_CTRL
+ }, {
+ { V4L2_CID_CONTRAST, V4L2_CTRL_TYPE_INTEGER,
+ "contrast", 0, 10000, 1, 100, 0, },
+ CUST_PARM_ID_CONTRAST_CTRL,
+ }, {
+ { V4L2_CID_HUE, V4L2_CTRL_TYPE_INTEGER,
+ "hue", 0, 10000, 1, 100, 0, },
+ CUST_PARM_ID_HUE_CTRL,
+ }, {
+ { V4L2_CID_SATURATION, V4L2_CTRL_TYPE_INTEGER,
+ "saturation", 0, 10000, 1, 100, 0, },
+ CUST_PARM_ID_SATURATION_CTRL,
+ },
+};
+
+struct video_std_to_audio_std {
+ v4l2_std_id video_std;
+ int audio_std;
+};
+
+static const struct video_std_to_audio_std video_to_audio_map[] = {
+ /* country : { 27, 32, 33, 34, 36, 44, 45, 46, 47, 48, 64,
+ 65, 86, 351, 352, 353, 354, 358, 372, 852, 972 } */
+ { (V4L2_STD_PAL_I | V4L2_STD_PAL_B | V4L2_STD_PAL_D |
+ V4L2_STD_SECAM_L | V4L2_STD_SECAM_D), TLG_TUNE_ASTD_NICAM },
+
+ /* country : { 1, 52, 54, 55, 886 } */
+ {V4L2_STD_NTSC_M | V4L2_STD_PAL_N | V4L2_STD_PAL_M, TLG_TUNE_ASTD_BTSC},
+
+ /* country : { 81 } */
+ { V4L2_STD_NTSC_M_JP, TLG_TUNE_ASTD_EIAJ },
+
+ /* other country : TLG_TUNE_ASTD_A2 */
+};
+static const unsigned int map_size = ARRAY_SIZE(video_to_audio_map);
+
+static int get_audio_std(v4l2_std_id v4l2_std)
+{
+ int i = 0;
+
+ for (; i < map_size; i++) {
+ if (v4l2_std & video_to_audio_map[i].video_std)
+ return video_to_audio_map[i].audio_std;
+ }
+ return TLG_TUNE_ASTD_A2;
+}
+
+static int vidioc_querycap(struct file *file, void *fh,
+ struct v4l2_capability *cap)
+{
+ struct front_face *front = fh;
+ struct poseidon *p = front->pd;
+
+ logs(front);
+
+ strcpy(cap->driver, "tele-video");
+ strcpy(cap->card, "Telegent Poseidon");
+ usb_make_path(p->udev, cap->bus_info, sizeof(cap->bus_info));
+ cap->version = KERNEL_VERSION(0, 0, 1);
+ cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_TUNER |
+ V4L2_CAP_AUDIO | V4L2_CAP_STREAMING |
+ V4L2_CAP_READWRITE | V4L2_CAP_VBI_CAPTURE;
+ return 0;
+}
+
+/*====================================================================*/
+static void init_copy(struct video_data *video, bool index)
+{
+ struct front_face *front = video->front;
+
+ video->field_count = index;
+ video->lines_copied = 0;
+ video->prev_left = 0 ;
+ video->dst = (char *)videobuf_to_vmalloc(front->curr_frame)
+ + index * video->lines_size;
+ video->vbi->copied = 0; /* set it here */
+}
+
+static bool get_frame(struct front_face *front, int *need_init)
+{
+ struct videobuf_buffer *vb = front->curr_frame;
+
+ if (vb)
+ return true;
+
+ spin_lock(&front->queue_lock);
+ if (!list_empty(&front->active)) {
+ vb = list_entry(front->active.next,
+ struct videobuf_buffer, queue);
+ if (need_init)
+ *need_init = 1;
+ front->curr_frame = vb;
+ list_del_init(&vb->queue);
+ }
+ spin_unlock(&front->queue_lock);
+
+ return !!vb;
+}
+
+/* check if the video's buffer is ready */
+static bool get_video_frame(struct front_face *front, struct video_data *video)
+{
+ int need_init = 0;
+ bool ret = true;
+
+ ret = get_frame(front, &need_init);
+ if (ret && need_init)
+ init_copy(video, 0);
+ return ret;
+}
+
+static void submit_frame(struct front_face *front)
+{
+ struct videobuf_buffer *vb = front->curr_frame;
+
+ if (vb == NULL)
+ return;
+
+ front->curr_frame = NULL;
+ vb->state = VIDEOBUF_DONE;
+ vb->field_count++;
+ do_gettimeofday(&vb->ts);
+
+ wake_up(&vb->done);
+}
+
+/*
+ * A frame is composed of two fields. If we receive all the two fields,
+ * call the submit_frame() to submit the whole frame to applications.
+ */
+static void end_field(struct video_data *video)
+{
+ /* logs(video->front); */
+ if (1 == video->field_count)
+ submit_frame(video->front);
+ else
+ init_copy(video, 1);
+}
+
+static void copy_video_data(struct video_data *video, char *src,
+ unsigned int count)
+{
+#define copy_data(len) \
+ do { \
+ if (++video->lines_copied > video->lines_per_field) \
+ goto overflow; \
+ memcpy(video->dst, src, len);\
+ video->dst += len + video->lines_size; \
+ src += len; \
+ count -= len; \
+ } while (0)
+
+ while (count && count >= video->lines_size) {
+ if (video->prev_left) {
+ copy_data(video->prev_left);
+ video->prev_left = 0;
+ continue;
+ }
+ copy_data(video->lines_size);
+ }
+ if (count && count < video->lines_size) {
+ memcpy(video->dst, src, count);
+
+ video->prev_left = video->lines_size - count;
+ video->dst += count;
+ }
+ return;
+
+overflow:
+ end_field(video);
+}
+
+static void check_trailer(struct video_data *video, char *src, int count)
+{
+ struct vbi_data *vbi = video->vbi;
+ int offset; /* trailer's offset */
+ char *buf;
+
+ offset = (video->context.pix.sizeimage / 2 + vbi->vbi_size / 2)
+ - (vbi->copied + video->lines_size * video->lines_copied);
+ if (video->prev_left)
+ offset -= (video->lines_size - video->prev_left);
+
+ if (offset > count || offset <= 0)
+ goto short_package;
+
+ buf = src + offset;
+
+ /* trailer : (VFHS) + U32 + U32 + field_num */
+ if (!strncmp(buf, "VFHS", 4)) {
+ int field_num = *((u32 *)(buf + 12));
+
+ if ((field_num & 1) ^ video->field_count) {
+ init_copy(video, video->field_count);
+ return;
+ }
+ copy_video_data(video, src, offset);
+ }
+short_package:
+ end_field(video);
+}
+
+/* ========== Check this more carefully! =========== */
+static inline void copy_vbi_data(struct vbi_data *vbi,
+ char *src, unsigned int count)
+{
+ struct front_face *front = vbi->front;
+
+ if (front && get_frame(front, NULL)) {
+ char *buf = videobuf_to_vmalloc(front->curr_frame);
+
+ if (vbi->video->field_count)
+ buf += (vbi->vbi_size / 2);
+ memcpy(buf + vbi->copied, src, count);
+ }
+ vbi->copied += count;
+}
+
+/*
+ * Copy the normal data (VBI or VIDEO) without the trailer.
+ * VBI is not interlaced, while VIDEO is interlaced.
+ */
+static inline void copy_vbi_video_data(struct video_data *video,
+ char *src, unsigned int count)
+{
+ struct vbi_data *vbi = video->vbi;
+ unsigned int vbi_delta = (vbi->vbi_size / 2) - vbi->copied;
+
+ if (vbi_delta >= count) {
+ copy_vbi_data(vbi, src, count);
+ } else {
+ if (vbi_delta) {
+ copy_vbi_data(vbi, src, vbi_delta);
+
+ /* we receive the two fields of the VBI*/
+ if (vbi->front && video->field_count)
+ submit_frame(vbi->front);
+ }
+ copy_video_data(video, src + vbi_delta, count - vbi_delta);
+ }
+}
+
+static void urb_complete_bulk(struct urb *urb)
+{
+ struct front_face *front = urb->context;
+ struct video_data *video = &front->pd->video_data;
+ char *src = (char *)urb->transfer_buffer;
+ int count = urb->actual_length;
+ int ret = 0;
+
+ if (!video->is_streaming || urb->status) {
+ if (urb->status == -EPROTO)
+ goto resend_it;
+ return;
+ }
+ if (!get_video_frame(front, video))
+ goto resend_it;
+
+ if (count == urb->transfer_buffer_length)
+ copy_vbi_video_data(video, src, count);
+ else
+ check_trailer(video, src, count);
+
+resend_it:
+ ret = usb_submit_urb(urb, GFP_ATOMIC);
+ if (ret)
+ log(" submit failed: error %d", ret);
+}
+
+/************************* for ISO *********************/
+#define GET_SUCCESS (0)
+#define GET_TRAILER (1)
+#define GET_TOO_MUCH_BUBBLE (2)
+#define GET_NONE (3)
+static int get_chunk(int start, struct urb *urb,
+ int *head, int *tail, int *bubble_err)
+{
+ struct usb_iso_packet_descriptor *pkt = NULL;
+ int ret = GET_SUCCESS;
+
+ for (*head = *tail = -1; start < urb->number_of_packets; start++) {
+ pkt = &urb->iso_frame_desc[start];
+
+ /* handle the bubble of the Hub */
+ if (-EOVERFLOW == pkt->status) {
+ if (++*bubble_err > urb->number_of_packets / 3)
+ return GET_TOO_MUCH_BUBBLE;
+ continue;
+ }
+
+ /* This is the gap */
+ if (pkt->status || pkt->actual_length <= 0
+ || pkt->actual_length > ISO_PKT_SIZE) {
+ if (*head != -1)
+ break;
+ continue;
+ }
+
+ /* a good isochronous packet */
+ if (pkt->actual_length == ISO_PKT_SIZE) {
+ if (*head == -1)
+ *head = start;
+ *tail = start;
+ continue;
+ }
+
+ /* trailer is here */
+ if (pkt->actual_length < ISO_PKT_SIZE) {
+ if (*head == -1) {
+ *head = start;
+ *tail = start;
+ return GET_TRAILER;
+ }
+ break;
+ }
+ }
+
+ if (*head == -1 && *tail == -1)
+ ret = GET_NONE;
+ return ret;
+}
+
+/*
+ * |__|------|___|-----|_______|
+ * ^ ^
+ * | |
+ * gap gap
+ */
+static void urb_complete_iso(struct urb *urb)
+{
+ struct front_face *front = urb->context;
+ struct video_data *video = &front->pd->video_data;
+ int bubble_err = 0, head = 0, tail = 0;
+ char *src = (char *)urb->transfer_buffer;
+ int ret = 0;
+
+ if (!video->is_streaming)
+ return;
+
+ do {
+ if (!get_video_frame(front, video))
+ goto out;
+
+ switch (get_chunk(head, urb, &head, &tail, &bubble_err)) {
+ case GET_SUCCESS:
+ copy_vbi_video_data(video, src + (head * ISO_PKT_SIZE),
+ (tail - head + 1) * ISO_PKT_SIZE);
+ break;
+ case GET_TRAILER:
+ check_trailer(video, src + (head * ISO_PKT_SIZE),
+ ISO_PKT_SIZE);
+ break;
+ case GET_NONE:
+ goto out;
+ case GET_TOO_MUCH_BUBBLE:
+ log("\t We got too much bubble");
+ schedule_work(&video->bubble_work);
+ return;
+ }
+ } while (head = tail + 1, head < urb->number_of_packets);
+
+out:
+ ret = usb_submit_urb(urb, GFP_ATOMIC);
+ if (ret)
+ log("usb_submit_urb err : %d", ret);
+}
+/*============================= [ end ] =====================*/
+
+static int prepare_iso_urb(struct video_data *video)
+{
+ struct usb_device *udev = video->pd->udev;
+ int i;
+
+ if (video->urb_array[0])
+ return 0;
+
+ for (i = 0; i < SBUF_NUM; i++) {
+ struct urb *urb;
+ void *mem;
+ int j;
+
+ urb = usb_alloc_urb(PK_PER_URB, GFP_KERNEL);
+ if (urb == NULL)
+ goto out;
+
+ video->urb_array[i] = urb;
+ mem = usb_buffer_alloc(udev,
+ ISO_PKT_SIZE * PK_PER_URB,
+ GFP_KERNEL,
+ &urb->transfer_dma);
+
+ urb->complete = urb_complete_iso; /* handler */
+ urb->dev = udev;
+ urb->context = video->front;
+ urb->pipe = usb_rcvisocpipe(udev,
+ video->endpoint_addr);
+ urb->interval = 1;
+ urb->transfer_flags = URB_ISO_ASAP | URB_NO_TRANSFER_DMA_MAP;
+ urb->number_of_packets = PK_PER_URB;
+ urb->transfer_buffer = mem;
+ urb->transfer_buffer_length = PK_PER_URB * ISO_PKT_SIZE;
+
+ for (j = 0; j < PK_PER_URB; j++) {
+ urb->iso_frame_desc[j].offset = ISO_PKT_SIZE * j;
+ urb->iso_frame_desc[j].length = ISO_PKT_SIZE;
+ }
+ }
+ return 0;
+out:
+ for (; i > 0; i--)
+ ;
+ return -ENOMEM;
+}
+
+/* return the succeeded number of the allocation */
+int alloc_bulk_urbs_generic(struct urb **urb_array, int num,
+ struct usb_device *udev, u8 ep_addr,
+ int buf_size, gfp_t gfp_flags,
+ usb_complete_t complete_fn, void *context)
+{
+ struct urb *urb;
+ void *mem;
+ int i;
+
+ for (i = 0; i < num; i++) {
+ urb = usb_alloc_urb(0, gfp_flags);
+ if (urb == NULL)
+ return i;
+
+ mem = usb_buffer_alloc(udev, buf_size, gfp_flags,
+ &urb->transfer_dma);
+ if (mem == NULL)
+ return i;
+
+ usb_fill_bulk_urb(urb, udev, usb_rcvbulkpipe(udev, ep_addr),
+ mem, buf_size, complete_fn, context);
+ urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+ urb_array[i] = urb;
+ }
+ return i;
+}
+
+void free_all_urb_generic(struct urb **urb_array, int num)
+{
+ int i;
+ struct urb *urb;
+
+ for (i = 0; i < num; i++) {
+ urb = urb_array[i];
+ if (urb) {
+ usb_buffer_free(urb->dev,
+ urb->transfer_buffer_length,
+ urb->transfer_buffer,
+ urb->transfer_dma);
+ usb_free_urb(urb);
+ urb_array[i] = NULL;
+ }
+ }
+}
+
+static int prepare_bulk_urb(struct video_data *video)
+{
+ if (video->urb_array[0])
+ return 0;
+
+ alloc_bulk_urbs_generic(video->urb_array, SBUF_NUM,
+ video->pd->udev, video->endpoint_addr,
+ 0x2000, GFP_KERNEL,
+ urb_complete_bulk, video->front);
+ return 0;
+}
+
+/* free the URBs */
+static void free_all_urb(struct video_data *video)
+{
+ free_all_urb_generic(video->urb_array, SBUF_NUM);
+}
+
+static void pd_buf_release(struct videobuf_queue *q, struct videobuf_buffer *vb)
+{
+ videobuf_vmalloc_free(vb);
+ vb->state = VIDEOBUF_NEEDS_INIT;
+}
+
+static void pd_buf_queue(struct videobuf_queue *q, struct videobuf_buffer *vb)
+{
+ struct front_face *front = q->priv_data;
+ vb->state = VIDEOBUF_QUEUED;
+ list_add_tail(&vb->queue, &front->active);
+}
+
+static int pd_buf_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb,
+ enum v4l2_field field)
+{
+ struct front_face *front = q->priv_data;
+ int rc;
+
+ switch (front->type) {
+ case V4L2_BUF_TYPE_VIDEO_CAPTURE:
+ if (VIDEOBUF_NEEDS_INIT == vb->state) {
+ struct v4l2_pix_format *pix;
+
+ pix = &front->pd->video_data.context.pix;
+ vb->size = pix->sizeimage; /* real frame size */
+ vb->width = pix->width;
+ vb->height = pix->height;
+ rc = videobuf_iolock(q, vb, NULL);
+ if (rc < 0)
+ return rc;
+ }
+ break;
+ case V4L2_BUF_TYPE_VBI_CAPTURE:
+ if (VIDEOBUF_NEEDS_INIT == vb->state) {
+ vb->size = front->pd->vbi_data.vbi_size;
+ rc = videobuf_iolock(q, vb, NULL);
+ if (rc < 0)
+ return rc;
+ }
+ break;
+ default:
+ return -EINVAL;
+ }
+ vb->field = field;
+ vb->state = VIDEOBUF_PREPARED;
+ return 0;
+}
+
+int fire_all_urb(struct video_data *video)
+{
+ int i, ret;
+
+ video->is_streaming = 1;
+
+ for (i = 0; i < SBUF_NUM; i++) {
+ ret = usb_submit_urb(video->urb_array[i], GFP_KERNEL);
+ if (ret)
+ log("(%d) failed: error %d", i, ret);
+ }
+ return ret;
+}
+
+static int start_video_stream(struct poseidon *pd)
+{
+ struct video_data *video = &pd->video_data;
+ s32 cmd_status;
+
+ send_set_req(pd, TAKE_REQUEST, 0, &cmd_status);
+ send_set_req(pd, PLAY_SERVICE, TLG_TUNE_PLAY_SVC_START, &cmd_status);
+
+ if (pd->cur_transfer_mode) {
+ prepare_iso_urb(video);
+ INIT_WORK(&video->bubble_work, iso_bubble_handler);
+ } else {
+ /* The bulk mode does not need a bubble handler */
+ prepare_bulk_urb(video);
+ }
+ fire_all_urb(video);
+ return 0;
+}
+
+static int pd_buf_setup(struct videobuf_queue *q, unsigned int *count,
+ unsigned int *size)
+{
+ struct front_face *front = q->priv_data;
+ struct poseidon *pd = front->pd;
+
+ switch (front->type) {
+ default:
+ return -EINVAL;
+ case V4L2_BUF_TYPE_VIDEO_CAPTURE: {
+ struct video_data *video = &pd->video_data;
+ struct v4l2_pix_format *pix = &video->context.pix;
+
+ *size = PAGE_ALIGN(pix->sizeimage);/* page aligned frame size */
+ if (*count < 4)
+ *count = 4;
+ if (1) {
+ /* same in different altersetting */
+ video->endpoint_addr = 0x82;
+ video->vbi = &pd->vbi_data;
+ video->vbi->video = video;
+ video->pd = pd;
+ video->lines_per_field = pix->height / 2;
+ video->lines_size = pix->width * 2;
+ video->front = front;
+ }
+ return start_video_stream(pd);
+ }
+
+ case V4L2_BUF_TYPE_VBI_CAPTURE: {
+ struct vbi_data *vbi = &pd->vbi_data;
+
+ *size = PAGE_ALIGN(vbi->vbi_size);
+ log("size : %d", *size);
+ if (*count == 0)
+ *count = 4;
+ }
+ break;
+ }
+ return 0;
+}
+
+static struct videobuf_queue_ops pd_video_qops = {
+ .buf_setup = pd_buf_setup,
+ .buf_prepare = pd_buf_prepare,
+ .buf_queue = pd_buf_queue,
+ .buf_release = pd_buf_release,
+};
+
+static int vidioc_enum_fmt(struct file *file, void *fh,
+ struct v4l2_fmtdesc *f)
+{
+ if (ARRAY_SIZE(poseidon_formats) <= f->index)
+ return -EINVAL;
+ f->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+ f->flags = 0;
+ f->pixelformat = poseidon_formats[f->index].fourcc;
+ strcpy(f->description, poseidon_formats[f->index].name);
+ return 0;
+}
+
+static int vidioc_g_fmt(struct file *file, void *fh, struct v4l2_format *f)
+{
+ struct front_face *front = fh;
+ struct poseidon *pd = front->pd;
+
+ logs(front);
+ f->fmt.pix = pd->video_data.context.pix;
+ return 0;
+}
+
+static int vidioc_try_fmt(struct file *file, void *fh,
+ struct v4l2_format *f)
+{
+ return 0;
+}
+
+/*
+ * VLC calls VIDIOC_S_STD before VIDIOC_S_FMT, while
+ * Mplayer calls them in the reverse order.
+ */
+static int pd_vidioc_s_fmt(struct poseidon *pd, struct v4l2_pix_format *pix)
+{
+ struct video_data *video = &pd->video_data;
+ struct running_context *context = &video->context;
+ struct v4l2_pix_format *pix_def = &context->pix;
+ s32 ret = 0, cmd_status = 0, vid_resol;
+
+ /* set the pixel format to firmware */
+ if (pix->pixelformat == V4L2_PIX_FMT_RGB565) {
+ vid_resol = TLG_TUNER_VID_FORMAT_RGB_565;
+ } else {
+ pix->pixelformat = V4L2_PIX_FMT_YUYV;
+ vid_resol = TLG_TUNER_VID_FORMAT_YUV;
+ }
+ ret = send_set_req(pd, VIDEO_STREAM_FMT_SEL,
+ vid_resol, &cmd_status);
+
+ /* set the resolution to firmware */
+ vid_resol = TLG_TUNE_VID_RES_720;
+ switch (pix->width) {
+ case 704:
+ vid_resol = TLG_TUNE_VID_RES_704;
+ break;
+ default:
+ pix->width = 720;
+ case 720:
+ break;
+ }
+ ret |= send_set_req(pd, VIDEO_ROSOLU_SEL,
+ vid_resol, &cmd_status);
+ if (ret || cmd_status) {
+ mutex_unlock(&pd->lock);
+ return -EBUSY;
+ }
+
+ pix_def->pixelformat = pix->pixelformat; /* save it */
+ pix->height = (context->tvnormid & V4L2_STD_525_60) ? 480 : 576;
+
+ /* Compare with the default setting */
+ if ((pix_def->width != pix->width)
+ || (pix_def->height != pix->height)) {
+ pix_def->width = pix->width;
+ pix_def->height = pix->height;
+ pix_def->bytesperline = pix->width * 2;
+ pix_def->sizeimage = pix->width * pix->height * 2;
+ }
+ *pix = *pix_def;
+
+ return 0;
+}
+
+static int vidioc_s_fmt(struct file *file, void *fh, struct v4l2_format *f)
+{
+ struct front_face *front = fh;
+ struct poseidon *pd = front->pd;
+
+ logs(front);
+ /* stop VBI here */
+ if (V4L2_BUF_TYPE_VIDEO_CAPTURE != f->type)
+ return -EINVAL;
+
+ mutex_lock(&pd->lock);
+ if (pd->file_for_stream == NULL)
+ pd->file_for_stream = file;
+ else if (file != pd->file_for_stream) {
+ mutex_unlock(&pd->lock);
+ return -EINVAL;
+ }
+
+ pd_vidioc_s_fmt(pd, &f->fmt.pix);
+ mutex_unlock(&pd->lock);
+ return 0;
+}
+
+static int vidioc_g_fmt_vbi(struct file *file, void *fh,
+ struct v4l2_format *v4l2_f)
+{
+ struct front_face *front = fh;
+ struct poseidon *pd = front->pd;
+ struct v4l2_vbi_format *vbi_fmt = &v4l2_f->fmt.vbi;
+
+ vbi_fmt->samples_per_line = 720 * 2;
+ vbi_fmt->sampling_rate = 6750000 * 4;
+ vbi_fmt->sample_format = V4L2_PIX_FMT_GREY;
+ vbi_fmt->offset = 64 * 4; /*FIXME: why offset */
+ if (pd->video_data.context.tvnormid & V4L2_STD_525_60) {
+ vbi_fmt->start[0] = 10;
+ vbi_fmt->start[1] = 264;
+ vbi_fmt->count[0] = V4L_NTSC_VBI_LINES;
+ vbi_fmt->count[1] = V4L_NTSC_VBI_LINES;
+ } else {
+ vbi_fmt->start[0] = 6;
+ vbi_fmt->start[1] = 314;
+ vbi_fmt->count[0] = V4L_PAL_VBI_LINES;
+ vbi_fmt->count[1] = V4L_PAL_VBI_LINES;
+ }
+ vbi_fmt->flags = V4L2_VBI_UNSYNC;
+ logs(front);
+ return 0;
+}
+
+static int set_std(struct poseidon *pd, v4l2_std_id *norm)
+{
+ struct video_data *video = &pd->video_data;
+ struct vbi_data *vbi = &pd->vbi_data;
+ struct running_context *context;
+ struct v4l2_pix_format *pix;
+ s32 i, ret = 0, cmd_status, param;
+ int height;
+
+ for (i = 0; i < POSEIDON_TVNORMS; i++) {
+ if (*norm & poseidon_tvnorms[i].v4l2_id) {
+ param = poseidon_tvnorms[i].tlg_tvnorm;
+ log("name : %s", poseidon_tvnorms[i].name);
+ goto found;
+ }
+ }
+ return -EINVAL;
+found:
+ mutex_lock(&pd->lock);
+ ret = send_set_req(pd, VIDEO_STD_SEL, param, &cmd_status);
+ if (ret || cmd_status)
+ goto out;
+
+ /* Set vbi size and check the height of the frame */
+ context = &video->context;
+ context->tvnormid = poseidon_tvnorms[i].v4l2_id;
+ if (context->tvnormid & V4L2_STD_525_60) {
+ vbi->vbi_size = V4L_NTSC_VBI_FRAMESIZE;
+ height = 480;
+ } else {
+ vbi->vbi_size = V4L_PAL_VBI_FRAMESIZE;
+ height = 576;
+ }
+
+ pix = &context->pix;
+ if (pix->height != height) {
+ pix->height = height;
+ pix->sizeimage = pix->width * pix->height * 2;
+ }
+
+out:
+ mutex_unlock(&pd->lock);
+ return ret;
+}
+
+int vidioc_s_std(struct file *file, void *fh, v4l2_std_id *norm)
+{
+ struct front_face *front = fh;
+ logs(front);
+ return set_std(front->pd, norm);
+}
+
+static int vidioc_enum_input(struct file *file, void *fh, struct v4l2_input *in)
+{
+ struct front_face *front = fh;
+
+ if (in->index < 0 || in->index >= POSEIDON_INPUTS)
+ return -EINVAL;
+ strcpy(in->name, pd_inputs[in->index].name);
+ in->type = V4L2_INPUT_TYPE_TUNER;
+
+ /*
+ * the audio input index mixed with this video input,
+ * Poseidon only have one audio/video, set to "0"
+ */
+ in->audioset = 0;
+ in->tuner = 0;
+ in->std = V4L2_STD_ALL;
+ in->status = 0;
+ logs(front);
+ return 0;
+}
+
+static int vidioc_g_input(struct file *file, void *fh, unsigned int *i)
+{
+ struct front_face *front = fh;
+ struct poseidon *pd = front->pd;
+ struct running_context *context = &pd->video_data.context;
+
+ logs(front);
+ *i = context->sig_index;
+ return 0;
+}
+
+/* We can support several inputs */
+static int vidioc_s_input(struct file *file, void *fh, unsigned int i)
+{
+ struct front_face *front = fh;
+ struct poseidon *pd = front->pd;
+ s32 ret, cmd_status;
+
+ if (i < 0 || i >= POSEIDON_INPUTS)
+ return -EINVAL;
+ ret = send_set_req(pd, SGNL_SRC_SEL,
+ pd_inputs[i].tlg_src, &cmd_status);
+ if (ret)
+ return ret;
+
+ pd->video_data.context.sig_index = i;
+ return 0;
+}
+
+static struct poseidon_control *check_control_id(__u32 id)
+{
+ struct poseidon_control *control = &controls[0];
+ int array_size = ARRAY_SIZE(controls);
+
+ for (; control < &controls[array_size]; control++)
+ if (control->v4l2_ctrl.id == id)
+ return control;
+ return NULL;
+}
+
+static int vidioc_queryctrl(struct file *file, void *fh,
+ struct v4l2_queryctrl *a)
+{
+ struct poseidon_control *control = NULL;
+
+ control = check_control_id(a->id);
+ if (!control)
+ return -EINVAL;
+
+ *a = control->v4l2_ctrl;
+ return 0;
+}
+
+static int vidioc_g_ctrl(struct file *file, void *fh, struct v4l2_control *ctrl)
+{
+ struct front_face *front = fh;
+ struct poseidon *pd = front->pd;
+ struct poseidon_control *control = NULL;
+ struct tuner_custom_parameter_s tuner_param;
+ s32 ret = 0, cmd_status;
+
+ control = check_control_id(ctrl->id);
+ if (!control)
+ return -EINVAL;
+
+ mutex_lock(&pd->lock);
+ ret = send_get_req(pd, TUNER_CUSTOM_PARAMETER, control->vc_id,
+ &tuner_param, &cmd_status, sizeof(tuner_param));
+ mutex_unlock(&pd->lock);
+
+ if (ret || cmd_status)
+ return -1;
+
+ ctrl->value = tuner_param.param_value;
+ return 0;
+}
+
+static int vidioc_s_ctrl(struct file *file, void *fh, struct v4l2_control *a)
+{
+ struct tuner_custom_parameter_s param = {0};
+ struct poseidon_control *control = NULL;
+ struct front_face *front = fh;
+ struct poseidon *pd = front->pd;
+ s32 ret = 0, cmd_status, params;
+
+ control = check_control_id(a->id);
+ if (!control)
+ return -EINVAL;
+
+ param.param_value = a->value;
+ param.param_id = control->vc_id;
+ params = *(s32 *)¶m; /* temp code */
+
+ mutex_lock(&pd->lock);
+ ret = send_set_req(pd, TUNER_CUSTOM_PARAMETER, params, &cmd_status);
+ ret = send_set_req(pd, TAKE_REQUEST, 0, &cmd_status);
+ mutex_unlock(&pd->lock);
+
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(HZ/4);
+ return ret;
+}
+
+/* Audio ioctls */
+static int vidioc_enumaudio(struct file *file, void *fh, struct v4l2_audio *a)
+{
+ if (0 != a->index)
+ return -EINVAL;
+ a->capability = V4L2_AUDCAP_STEREO;
+ strcpy(a->name, "USB audio in");
+ /*Poseidon have no AVL function.*/
+ a->mode = 0;
+ return 0;
+}
+
+int vidioc_g_audio(struct file *file, void *fh, struct v4l2_audio *a)
+{
+ a->index = 0;
+ a->capability = V4L2_AUDCAP_STEREO;
+ strcpy(a->name, "USB audio in");
+ a->mode = 0;
+ return 0;
+}
+
+int vidioc_s_audio(struct file *file, void *fh, struct v4l2_audio *a)
+{
+ return (0 == a->index) ? 0 : -EINVAL;
+}
+
+/* Tuner ioctls */
+static int vidioc_g_tuner(struct file *file, void *fh, struct v4l2_tuner *tuner)
+{
+ struct front_face *front = fh;
+ struct poseidon *pd = front->pd;
+ struct tuner_atv_sig_stat_s atv_stat;
+ s32 count = 5, ret, cmd_status;
+ int index;
+
+ if (0 != tuner->index)
+ return -EINVAL;
+
+ mutex_lock(&pd->lock);
+ ret = send_get_req(pd, TUNER_STATUS, TLG_MODE_ANALOG_TV,
+ &atv_stat, &cmd_status, sizeof(atv_stat));
+
+ while (atv_stat.sig_lock_busy && count-- && !ret) {
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(HZ);
+
+ ret = send_get_req(pd, TUNER_STATUS, TLG_MODE_ANALOG_TV,
+ &atv_stat, &cmd_status, sizeof(atv_stat));
+ }
+ mutex_unlock(&pd->lock);
+
+ if (debug_mode)
+ log("P:%d,S:%d", atv_stat.sig_present, atv_stat.sig_strength);
+
+ if (ret || cmd_status)
+ tuner->signal = 0;
+ else if (atv_stat.sig_present && !atv_stat.sig_strength)
+ tuner->signal = 0xFFFF;
+ else
+ tuner->signal = (atv_stat.sig_strength * 255 / 10) << 8;
+
+ strcpy(tuner->name, "Telegent Systems");
+ tuner->type = V4L2_TUNER_ANALOG_TV;
+ tuner->rangelow = TUNER_FREQ_MIN / 62500;
+ tuner->rangehigh = TUNER_FREQ_MAX / 62500;
+ tuner->capability = V4L2_TUNER_CAP_NORM | V4L2_TUNER_CAP_STEREO |
+ V4L2_TUNER_CAP_LANG1 | V4L2_TUNER_CAP_LANG2;
+ index = pd->video_data.context.audio_idx;
+ tuner->rxsubchans = pd_audio_modes[index].v4l2_audio_sub;
+ tuner->audmode = pd_audio_modes[index].v4l2_audio_mode;
+ tuner->afc = 0;
+ logs(front);
+ return 0;
+}
+
+static int pd_vidioc_s_tuner(struct poseidon *pd, int index)
+{
+ s32 ret = 0, cmd_status, param, audiomode;
+
+ mutex_lock(&pd->lock);
+ param = pd_audio_modes[index].tlg_audio_mode;
+ ret = send_set_req(pd, TUNER_AUD_MODE, param, &cmd_status);
+ audiomode = get_audio_std(pd->video_data.context.tvnormid);
+ ret |= send_set_req(pd, TUNER_AUD_ANA_STD, audiomode,
+ &cmd_status);
+ if (!ret)
+ pd->video_data.context.audio_idx = index;
+ mutex_unlock(&pd->lock);
+ return ret;
+}
+
+static int vidioc_s_tuner(struct file *file, void *fh, struct v4l2_tuner *a)
+{
+ struct front_face *front = fh;
+ struct poseidon *pd = front->pd;
+ int index;
+
+ if (0 != a->index)
+ return -EINVAL;
+ logs(front);
+ for (index = 0; index < POSEIDON_AUDIOMODS; index++)
+ if (a->audmode == pd_audio_modes[index].v4l2_audio_mode)
+ return pd_vidioc_s_tuner(pd, index);
+ return -EINVAL;
+}
+
+static int vidioc_g_frequency(struct file *file, void *fh,
+ struct v4l2_frequency *freq)
+{
+ struct front_face *front = fh;
+ struct poseidon *pd = front->pd;
+ struct running_context *context = &pd->video_data.context;
+
+ if (0 != freq->tuner)
+ return -EINVAL;
+ freq->frequency = context->freq;
+ freq->type = V4L2_TUNER_ANALOG_TV;
+ return 0;
+}
+
+static int set_frequency(struct poseidon *pd, __u32 frequency)
+{
+ s32 ret = 0, param, cmd_status;
+ struct running_context *context = &pd->video_data.context;
+
+ param = frequency * 62500 / 1000;
+ if (param < TUNER_FREQ_MIN/1000 || param > TUNER_FREQ_MAX / 1000)
+ return -EINVAL;
+
+ mutex_lock(&pd->lock);
+ ret = send_set_req(pd, TUNE_FREQ_SELECT, param, &cmd_status);
+ ret = send_set_req(pd, TAKE_REQUEST, 0, &cmd_status);
+
+ msleep(250); /* wait for a while until the hardware is ready. */
+ context->freq = frequency;
+ mutex_unlock(&pd->lock);
+ return ret;
+}
+
+static int vidioc_s_frequency(struct file *file, void *fh,
+ struct v4l2_frequency *freq)
+{
+ struct front_face *front = fh;
+ struct poseidon *pd = front->pd;
+
+ logs(front);
+#ifdef CONFIG_PM
+ pd->pm_suspend = pm_video_suspend;
+ pd->pm_resume = pm_video_resume;
+#endif
+ return set_frequency(pd, freq->frequency);
+}
+
+static int vidioc_reqbufs(struct file *file, void *fh,
+ struct v4l2_requestbuffers *b)
+{
+ struct front_face *front = file->private_data;
+ logs(front);
+ return videobuf_reqbufs(&front->q, b);
+}
+
+static int vidioc_querybuf(struct file *file, void *fh, struct v4l2_buffer *b)
+{
+ struct front_face *front = file->private_data;
+ logs(front);
+ return videobuf_querybuf(&front->q, b);
+}
+
+static int vidioc_qbuf(struct file *file, void *fh, struct v4l2_buffer *b)
+{
+ struct front_face *front = file->private_data;
+ return videobuf_qbuf(&front->q, b);
+}
+
+static int vidioc_dqbuf(struct file *file, void *fh, struct v4l2_buffer *b)
+{
+ struct front_face *front = file->private_data;
+ return videobuf_dqbuf(&front->q, b, file->f_flags & O_NONBLOCK);
+}
+
+/* Just stop the URBs, do not free the URBs */
+int usb_transfer_stop(struct video_data *video)
+{
+ if (video->is_streaming) {
+ int i;
+ s32 cmd_status;
+ struct poseidon *pd = video->pd;
+
+ video->is_streaming = 0;
+ for (i = 0; i < SBUF_NUM; ++i) {
+ if (video->urb_array[i])
+ usb_kill_urb(video->urb_array[i]);
+ }
+
+ send_set_req(pd, PLAY_SERVICE, TLG_TUNE_PLAY_SVC_STOP,
+ &cmd_status);
+ }
+ return 0;
+}
+
+int stop_all_video_stream(struct poseidon *pd)
+{
+ struct video_data *video = &pd->video_data;
+ struct vbi_data *vbi = &pd->vbi_data;
+
+ mutex_lock(&pd->lock);
+ if (video->is_streaming) {
+ struct front_face *front = video->front;
+
+ /* stop the URBs */
+ usb_transfer_stop(video);
+ free_all_urb(video);
+
+ /* stop the host side of VIDEO */
+ videobuf_stop(&front->q);
+ videobuf_mmap_free(&front->q);
+
+ /* stop the host side of VBI */
+ front = vbi->front;
+ if (front) {
+ videobuf_stop(&front->q);
+ videobuf_mmap_free(&front->q);
+ }
+ }
+ mutex_unlock(&pd->lock);
+ return 0;
+}
+
+/*
+ * The bubbles can seriously damage the video's quality,
+ * though it occurs in very rare situation.
+ */
+static void iso_bubble_handler(struct work_struct *w)
+{
+ struct video_data *video;
+ struct poseidon *pd;
+
+ video = container_of(w, struct video_data, bubble_work);
+ pd = video->pd;
+
+ mutex_lock(&pd->lock);
+ usb_transfer_stop(video);
+ msleep(500);
+ start_video_stream(pd);
+ mutex_unlock(&pd->lock);
+}
+
+
+static int vidioc_streamon(struct file *file, void *fh,
+ enum v4l2_buf_type type)
+{
+ struct front_face *front = fh;
+
+ logs(front);
+ if (unlikely(type != front->type))
+ return -EINVAL;
+ return videobuf_streamon(&front->q);
+}
+
+static int vidioc_streamoff(struct file *file, void *fh,
+ enum v4l2_buf_type type)
+{
+ struct front_face *front = file->private_data;
+
+ logs(front);
+ if (unlikely(type != front->type))
+ return -EINVAL;
+ return videobuf_streamoff(&front->q);
+}
+
+/* Set the firmware's default values : need altersetting */
+static int pd_video_checkmode(struct poseidon *pd)
+{
+ s32 ret = 0, cmd_status, audiomode;
+
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(HZ/2);
+
+ /* choose the altersetting */
+ ret = usb_set_interface(pd->udev, 0,
+ (pd->cur_transfer_mode ?
+ ISO_3K_BULK_ALTERNATE_IFACE :
+ BULK_ALTERNATE_IFACE));
+ if (ret < 0)
+ goto error;
+
+ /* set default parameters for PAL-D , with the VBI enabled*/
+ ret = set_tuner_mode(pd, TLG_MODE_ANALOG_TV);
+ ret |= send_set_req(pd, SGNL_SRC_SEL,
+ TLG_SIG_SRC_ANTENNA, &cmd_status);
+ ret |= send_set_req(pd, VIDEO_STD_SEL,
+ TLG_TUNE_VSTD_PAL_D, &cmd_status);
+ ret |= send_set_req(pd, VIDEO_STREAM_FMT_SEL,
+ TLG_TUNER_VID_FORMAT_YUV, &cmd_status);
+ ret |= send_set_req(pd, VIDEO_ROSOLU_SEL,
+ TLG_TUNE_VID_RES_720, &cmd_status);
+ ret |= send_set_req(pd, TUNE_FREQ_SELECT, TUNER_FREQ_MIN, &cmd_status);
+ ret |= send_set_req(pd, VBI_DATA_SEL, 1, &cmd_status);/* enable vbi */
+
+ /* set the audio */
+ audiomode = get_audio_std(pd->video_data.context.tvnormid);
+ ret |= send_set_req(pd, TUNER_AUD_ANA_STD, audiomode, &cmd_status);
+ ret |= send_set_req(pd, TUNER_AUD_MODE,
+ TLG_TUNE_TVAUDIO_MODE_STEREO, &cmd_status);
+ ret |= send_set_req(pd, AUDIO_SAMPLE_RATE_SEL,
+ ATV_AUDIO_RATE_48K, &cmd_status);
+error:
+ return ret;
+}
+
+#ifdef CONFIG_PM
+static int pm_video_suspend(struct poseidon *pd)
+{
+ /* stop audio */
+ pm_alsa_suspend(pd);
+
+ /* stop and free all the URBs */
+ usb_transfer_stop(&pd->video_data);
+ free_all_urb(&pd->video_data);
+
+ /* reset the interface */
+ usb_set_interface(pd->udev, 0, 0);
+ msleep(300);
+ return 0;
+}
+
+static int restore_v4l2_context(struct poseidon *pd,
+ struct running_context *context)
+{
+ struct front_face *front = pd->video_data.front;
+
+ pd_video_checkmode(pd);
+
+ set_std(pd, &context->tvnormid);
+ vidioc_s_input(NULL, front, context->sig_index);
+ pd_vidioc_s_tuner(pd, context->audio_idx);
+ pd_vidioc_s_fmt(pd, &context->pix);
+ set_frequency(pd, context->freq);
+ return 0;
+}
+
+static int pm_video_resume(struct poseidon *pd)
+{
+ struct video_data *video = &pd->video_data;
+
+ /* resume the video */
+ /* [1] restore the origin V4L2 parameters */
+ restore_v4l2_context(pd, &video->context);
+
+ /* [2] initiate video copy variables */
+ if (video->front->curr_frame)
+ init_copy(video, 0);
+
+ /* [3] fire urbs */
+ start_video_stream(pd);
+
+ /* resume the audio */
+ pm_alsa_resume(pd);
+ return 0;
+}
+#endif
+
+void set_debug_mode(struct video_device *vfd, int debug_mode)
+{
+ vfd->debug = 0;
+ if (debug_mode & 0x1)
+ vfd->debug = V4L2_DEBUG_IOCTL;
+ if (debug_mode & 0x2)
+ vfd->debug = V4L2_DEBUG_IOCTL | V4L2_DEBUG_IOCTL_ARG;
+}
+
+static void init_video_context(struct running_context *context)
+{
+ context->sig_index = 0;
+ context->audio_idx = 1; /* stereo */
+ context->tvnormid = V4L2_STD_PAL_D;
+ context->pix = (struct v4l2_pix_format) {
+ .width = 720,
+ .height = 576,
+ .pixelformat = V4L2_PIX_FMT_YUYV,
+ .field = V4L2_FIELD_INTERLACED,
+ .bytesperline = 720 * 2,
+ .sizeimage = 720 * 576 * 2,
+ .colorspace = V4L2_COLORSPACE_SMPTE170M,
+ .priv = 0
+ };
+}
+
+static int pd_video_open(struct file *file)
+{
+ struct video_device *vfd = video_devdata(file);
+ struct poseidon *pd = video_get_drvdata(vfd);
+ struct front_face *front = NULL;
+ int ret = -ENOMEM;
+
+ mutex_lock(&pd->lock);
+ usb_autopm_get_interface(pd->interface);
+
+ if (vfd->vfl_type == VFL_TYPE_GRABBER
+ && !(pd->state & POSEIDON_STATE_ANALOG)) {
+ front = kzalloc(sizeof(struct front_face), GFP_KERNEL);
+ if (!front)
+ goto out;
+
+ pd->cur_transfer_mode = usb_transfer_mode;/* bulk or iso */
+ init_video_context(&pd->video_data.context);
+
+ ret = pd_video_checkmode(pd);
+ if (ret < 0) {
+ kfree(front);
+ ret = -1;
+ goto out;
+ }
+
+ pd->state |= POSEIDON_STATE_ANALOG;
+ front->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+ pd->video_data.users++;
+ set_debug_mode(vfd, debug_mode);
+
+ videobuf_queue_vmalloc_init(&front->q, &pd_video_qops,
+ NULL, &front->queue_lock,
+ V4L2_BUF_TYPE_VIDEO_CAPTURE,
+ V4L2_FIELD_INTERLACED,/* video is interlacd */
+ sizeof(struct videobuf_buffer),/*it's enough*/
+ front);
+ } else if (vfd->vfl_type == VFL_TYPE_VBI
+ && !(pd->state & POSEIDON_STATE_VBI)) {
+ front = kzalloc(sizeof(struct front_face), GFP_KERNEL);
+ if (!front)
+ goto out;
+
+ pd->state |= POSEIDON_STATE_VBI;
+ front->type = V4L2_BUF_TYPE_VBI_CAPTURE;
+ pd->vbi_data.front = front;
+ pd->vbi_data.users++;
+
+ videobuf_queue_vmalloc_init(&front->q, &pd_video_qops,
+ NULL, &front->queue_lock,
+ V4L2_BUF_TYPE_VBI_CAPTURE,
+ V4L2_FIELD_NONE, /* vbi is NONE mode */
+ sizeof(struct videobuf_buffer),
+ front);
+ } else {
+ /* maybe add FM support here */
+ log("other ");
+ ret = -EINVAL;
+ goto out;
+ }
+
+ front->pd = pd;
+ front->curr_frame = NULL;
+ INIT_LIST_HEAD(&front->active);
+ spin_lock_init(&front->queue_lock);
+
+ file->private_data = front;
+ kref_get(&pd->kref);
+
+ mutex_unlock(&pd->lock);
+ return 0;
+out:
+ usb_autopm_put_interface(pd->interface);
+ mutex_unlock(&pd->lock);
+ return ret;
+}
+
+static int pd_video_release(struct file *file)
+{
+ struct front_face *front = file->private_data;
+ struct poseidon *pd = front->pd;
+ s32 cmd_status = 0;
+
+ logs(front);
+ mutex_lock(&pd->lock);
+
+ if (front->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) {
+ pd->state &= ~POSEIDON_STATE_ANALOG;
+
+ /* stop the device, and free the URBs */
+ usb_transfer_stop(&pd->video_data);
+ free_all_urb(&pd->video_data);
+
+ /* stop the firmware */
+ send_set_req(pd, PLAY_SERVICE, TLG_TUNE_PLAY_SVC_STOP,
+ &cmd_status);
+
+ pd->file_for_stream = NULL;
+ pd->video_data.users--;
+ } else if (front->type == V4L2_BUF_TYPE_VBI_CAPTURE) {
+ pd->state &= ~POSEIDON_STATE_VBI;
+ pd->vbi_data.front = NULL;
+ pd->vbi_data.users--;
+ }
+ videobuf_stop(&front->q);
+ videobuf_mmap_free(&front->q);
+
+ usb_autopm_put_interface(pd->interface);
+ mutex_unlock(&pd->lock);
+
+ kfree(front);
+ file->private_data = NULL;
+ kref_put(&pd->kref, poseidon_delete);
+ return 0;
+}
+
+static int pd_video_mmap(struct file *file, struct vm_area_struct *vma)
+{
+ struct front_face *front = file->private_data;
+ return videobuf_mmap_mapper(&front->q, vma);
+}
+
+unsigned int pd_video_poll(struct file *file, poll_table *table)
+{
+ struct front_face *front = file->private_data;
+ return videobuf_poll_stream(file, &front->q, table);
+}
+
+ssize_t pd_video_read(struct file *file, char __user *buffer,
+ size_t count, loff_t *ppos)
+{
+ struct front_face *front = file->private_data;
+ return videobuf_read_stream(&front->q, buffer, count, ppos,
+ 0, file->f_flags & O_NONBLOCK);
+}
+
+/* This struct works for both VIDEO and VBI */
+static const struct v4l2_file_operations pd_video_fops = {
+ .owner = THIS_MODULE,
+ .open = pd_video_open,
+ .release = pd_video_release,
+ .read = pd_video_read,
+ .poll = pd_video_poll,
+ .mmap = pd_video_mmap,
+ .ioctl = video_ioctl2, /* maybe changed in future */
+};
+
+static const struct v4l2_ioctl_ops pd_video_ioctl_ops = {
+ .vidioc_querycap = vidioc_querycap,
+
+ /* Video format */
+ .vidioc_g_fmt_vid_cap = vidioc_g_fmt,
+ .vidioc_enum_fmt_vid_cap = vidioc_enum_fmt,
+ .vidioc_s_fmt_vid_cap = vidioc_s_fmt,
+ .vidioc_g_fmt_vbi_cap = vidioc_g_fmt_vbi, /* VBI */
+ .vidioc_try_fmt_vid_cap = vidioc_try_fmt,
+
+ /* Input */
+ .vidioc_g_input = vidioc_g_input,
+ .vidioc_s_input = vidioc_s_input,
+ .vidioc_enum_input = vidioc_enum_input,
+
+ /* Audio ioctls */
+ .vidioc_enumaudio = vidioc_enumaudio,
+ .vidioc_g_audio = vidioc_g_audio,
+ .vidioc_s_audio = vidioc_s_audio,
+
+ /* Tuner ioctls */
+ .vidioc_g_tuner = vidioc_g_tuner,
+ .vidioc_s_tuner = vidioc_s_tuner,
+ .vidioc_s_std = vidioc_s_std,
+ .vidioc_g_frequency = vidioc_g_frequency,
+ .vidioc_s_frequency = vidioc_s_frequency,
+
+ /* Buffer handlers */
+ .vidioc_reqbufs = vidioc_reqbufs,
+ .vidioc_querybuf = vidioc_querybuf,
+ .vidioc_qbuf = vidioc_qbuf,
+ .vidioc_dqbuf = vidioc_dqbuf,
+
+ /* Stream on/off */
+ .vidioc_streamon = vidioc_streamon,
+ .vidioc_streamoff = vidioc_streamoff,
+
+ /* Control handling */
+ .vidioc_queryctrl = vidioc_queryctrl,
+ .vidioc_g_ctrl = vidioc_g_ctrl,
+ .vidioc_s_ctrl = vidioc_s_ctrl,
+};
+
+static struct video_device pd_video_template = {
+ .name = "Telegent-Video",
+ .fops = &pd_video_fops,
+ .minor = -1,
+ .release = video_device_release,
+ .tvnorms = V4L2_STD_ALL,
+ .ioctl_ops = &pd_video_ioctl_ops,
+};
+
+struct video_device *vdev_init(struct poseidon *pd, struct video_device *tmp)
+{
+ struct video_device *vfd;
+
+ vfd = video_device_alloc();
+ if (vfd == NULL)
+ return NULL;
+ *vfd = *tmp;
+ vfd->minor = -1;
+ vfd->v4l2_dev = &pd->v4l2_dev;
+ /*vfd->parent = &(pd->udev->dev); */
+ vfd->release = video_device_release;
+ video_set_drvdata(vfd, pd);
+ return vfd;
+}
+
+void destroy_video_device(struct video_device **v_dev)
+{
+ struct video_device *dev = *v_dev;
+
+ if (dev == NULL)
+ return;
+
+ if (video_is_registered(dev))
+ video_unregister_device(dev);
+ else
+ video_device_release(dev);
+ *v_dev = NULL;
+}
+
+void pd_video_exit(struct poseidon *pd)
+{
+ struct video_data *video = &pd->video_data;
+ struct vbi_data *vbi = &pd->vbi_data;
+
+ destroy_video_device(&video->v_dev);
+ destroy_video_device(&vbi->v_dev);
+ log();
+}
+
+int pd_video_init(struct poseidon *pd)
+{
+ struct video_data *video = &pd->video_data;
+ struct vbi_data *vbi = &pd->vbi_data;
+ int ret = -ENOMEM;
+
+ video->v_dev = vdev_init(pd, &pd_video_template);
+ if (video->v_dev == NULL)
+ goto out;
+
+ ret = video_register_device(video->v_dev, VFL_TYPE_GRABBER, -1);
+ if (ret != 0)
+ goto out;
+
+ /* VBI uses the same template as video */
+ vbi->v_dev = vdev_init(pd, &pd_video_template);
+ if (vbi->v_dev == NULL) {
+ ret = -ENOMEM;
+ goto out;
+ }
+ ret = video_register_device(vbi->v_dev, VFL_TYPE_VBI, -1);
+ if (ret != 0)
+ goto out;
+ log("register VIDEO/VBI devices");
+ return 0;
+out:
+ log("VIDEO/VBI devices register failed, : %d", ret);
+ pd_video_exit(pd);
+ return ret;
+}
+
diff --git a/drivers/media/video/tlg2300/vendorcmds.h b/drivers/media/video/tlg2300/vendorcmds.h
new file mode 100644
index 0000000..ba6f4ae
--- /dev/null
+++ b/drivers/media/video/tlg2300/vendorcmds.h
@@ -0,0 +1,243 @@
+#ifndef VENDOR_CMD_H_
+#define VENDOR_CMD_H_
+
+#define BULK_ALTERNATE_IFACE (2)
+#define ISO_3K_BULK_ALTERNATE_IFACE (1)
+#define REQ_SET_CMD (0X00)
+#define REQ_GET_CMD (0X80)
+
+enum tlg__analog_audio_standard {
+ TLG_TUNE_ASTD_NONE = 0x00000000,
+ TLG_TUNE_ASTD_A2 = 0x00000001,
+ TLG_TUNE_ASTD_NICAM = 0x00000002,
+ TLG_TUNE_ASTD_EIAJ = 0x00000004,
+ TLG_TUNE_ASTD_BTSC = 0x00000008,
+ TLG_TUNE_ASTD_FM_US = 0x00000010,
+ TLG_TUNE_ASTD_FM_EUR = 0x00000020,
+ TLG_TUNE_ASTD_ALL = 0x0000003f
+};
+
+/*
+ * identifiers for Custom Parameter messages.
+ * @typedef cmd_custom_param_id_t
+ */
+enum cmd_custom_param_id {
+ CUST_PARM_ID_NONE = 0x00,
+ CUST_PARM_ID_BRIGHTNESS_CTRL = 0x01,
+ CUST_PARM_ID_CONTRAST_CTRL = 0x02,
+ CUST_PARM_ID_HUE_CTRL = 0x03,
+ CUST_PARM_ID_SATURATION_CTRL = 0x04,
+ CUST_PARM_ID_AUDIO_SNR_THRESHOLD = 0x10,
+ CUST_PARM_ID_AUDIO_AGC_THRESHOLD = 0x11,
+ CUST_PARM_ID_MAX
+};
+
+struct tuner_custom_parameter_s {
+ uint16_t param_id; /* Parameter identifier */
+ uint16_t param_value; /* Parameter value */
+};
+
+struct tuner_ber_rate_s {
+ uint32_t ber_rate; /* BER sample rate in seconds */
+};
+
+struct tuner_atv_sig_stat_s {
+ uint32_t sig_present;
+ uint32_t sig_locked;
+ uint32_t sig_lock_busy;
+ uint32_t sig_strength; /* milliDb */
+ uint32_t tv_audio_chan; /* mono/stereo/sap*/
+ uint32_t mvision_stat; /* macrovision status */
+};
+
+struct tuner_dtv_sig_stat_s {
+ uint32_t sig_present; /* Boolean*/
+ uint32_t sig_locked; /* Boolean */
+ uint32_t sig_lock_busy; /* Boolean (Can this time-out?) */
+ uint32_t sig_strength; /* milliDb*/
+};
+
+struct tuner_fm_sig_stat_s {
+ uint32_t sig_present; /* Boolean*/
+ uint32_t sig_locked; /* Boolean */
+ uint32_t sig_lock_busy; /* Boolean */
+ uint32_t sig_stereo_mono;/* TBD*/
+ uint32_t sig_strength; /* milliDb*/
+};
+
+enum _tag_tlg_tune_srv_cmd {
+ TLG_TUNE_PLAY_SVC_START = 1,
+ TLG_TUNE_PLAY_SVC_STOP
+};
+
+enum _tag_tune_atv_audio_mode_caps {
+ TLG_TUNE_TVAUDIO_MODE_MONO = 0x00000001,
+ TLG_TUNE_TVAUDIO_MODE_STEREO = 0x00000002,
+ TLG_TUNE_TVAUDIO_MODE_LANG_A = 0x00000010,/* Primary language*/
+ TLG_TUNE_TVAUDIO_MODE_LANG_B = 0x00000020,/* 2nd avail language*/
+ TLG_TUNE_TVAUDIO_MODE_LANG_C = 0x00000040
+};
+
+
+enum _tag_tuner_atv_audio_rates {
+ ATV_AUDIO_RATE_NONE = 0x00,/* Audio not supported*/
+ ATV_AUDIO_RATE_32K = 0x01,/* Audio rate = 32 KHz*/
+ ATV_AUDIO_RATE_48K = 0x02, /* Audio rate = 48 KHz*/
+ ATV_AUDIO_RATE_31_25K = 0x04 /* Audio rate = 31.25KHz */
+};
+
+enum _tag_tune_atv_vid_res_caps {
+ TLG_TUNE_VID_RES_NONE = 0x00000000,
+ TLG_TUNE_VID_RES_720 = 0x00000001,
+ TLG_TUNE_VID_RES_704 = 0x00000002,
+ TLG_TUNE_VID_RES_360 = 0x00000004
+};
+
+enum _tag_tuner_analog_video_format {
+ TLG_TUNER_VID_FORMAT_YUV = 0x00000001,
+ TLG_TUNER_VID_FORMAT_YCRCB = 0x00000002,
+ TLG_TUNER_VID_FORMAT_RGB_565 = 0x00000004,
+};
+
+enum tlg_ext_audio_support {
+ TLG_EXT_AUDIO_NONE = 0x00,/* No external audio input supported */
+ TLG_EXT_AUDIO_LR = 0x01/* LR external audio inputs supported*/
+};
+
+enum {
+ TLG_MODE_NONE = 0x00, /* No Mode specified*/
+ TLG_MODE_ANALOG_TV = 0x01, /* Analog Television mode*/
+ TLG_MODE_ANALOG_TV_UNCOMP = 0x01, /* Analog Television mode*/
+ TLG_MODE_ANALOG_TV_COMP = 0x02, /* Analog TV mode (compressed)*/
+ TLG_MODE_FM_RADIO = 0x04, /* FM Radio mode*/
+ TLG_MODE_DVB_T = 0x08, /* Digital TV (DVB-T)*/
+};
+
+enum tlg_signal_sources_t {
+ TLG_SIG_SRC_NONE = 0x00,/* Signal source not specified */
+ TLG_SIG_SRC_ANTENNA = 0x01,/* Signal src is: Antenna */
+ TLG_SIG_SRC_CABLE = 0x02,/* Signal src is: Coax Cable*/
+ TLG_SIG_SRC_SVIDEO = 0x04,/* Signal src is: S_VIDEO */
+ TLG_SIG_SRC_COMPOSITE = 0x08 /* Signal src is: Composite Video */
+};
+
+enum tuner_analog_video_standard {
+ TLG_TUNE_VSTD_NONE = 0x00000000,
+ TLG_TUNE_VSTD_NTSC_M = 0x00000001,
+ TLG_TUNE_VSTD_NTSC_M_J = 0x00000002,/* Japan */
+ TLG_TUNE_VSTD_PAL_B = 0x00000010,
+ TLG_TUNE_VSTD_PAL_D = 0x00000020,
+ TLG_TUNE_VSTD_PAL_G = 0x00000040,
+ TLG_TUNE_VSTD_PAL_H = 0x00000080,
+ TLG_TUNE_VSTD_PAL_I = 0x00000100,
+ TLG_TUNE_VSTD_PAL_M = 0x00000200,
+ TLG_TUNE_VSTD_PAL_N = 0x00000400,
+ TLG_TUNE_VSTD_SECAM_B = 0x00001000,
+ TLG_TUNE_VSTD_SECAM_D = 0x00002000,
+ TLG_TUNE_VSTD_SECAM_G = 0x00004000,
+ TLG_TUNE_VSTD_SECAM_H = 0x00008000,
+ TLG_TUNE_VSTD_SECAM_K = 0x00010000,
+ TLG_TUNE_VSTD_SECAM_K1 = 0x00020000,
+ TLG_TUNE_VSTD_SECAM_L = 0x00040000,
+ TLG_TUNE_VSTD_SECAM_L1 = 0x00080000,
+ TLG_TUNE_VSTD_PAL_N_COMBO = 0x00100000
+};
+
+enum tlg_mode_caps {
+ TLG_MODE_CAPS_NONE = 0x00, /* No Mode specified */
+ TLG_MODE_CAPS_ANALOG_TV_UNCOMP = 0x01, /* Analog TV mode */
+ TLG_MODE_CAPS_ANALOG_TV_COMP = 0x02, /* Analog TV (compressed)*/
+ TLG_MODE_CAPS_FM_RADIO = 0x04, /* FM Radio mode */
+ TLG_MODE_CAPS_DVB_T = 0x08, /* Digital TV (DVB-T) */
+};
+
+enum poseidon_vendor_cmds {
+ LAST_CMD_STAT = 0x00,
+ GET_CHIP_ID = 0x01,
+ GET_FW_ID = 0x02,
+ PRODUCT_CAPS = 0x03,
+
+ TUNE_MODE_CAP_ATV = 0x10,
+ TUNE_MODE_CAP_ATVCOMP = 0X10,
+ TUNE_MODE_CAP_DVBT = 0x10,
+ TUNE_MODE_CAP_FM = 0x10,
+ TUNE_MODE_SELECT = 0x11,
+ TUNE_FREQ_SELECT = 0x12,
+ SGNL_SRC_SEL = 0x13,
+
+ VIDEO_STD_SEL = 0x14,
+ VIDEO_STREAM_FMT_SEL = 0x15,
+ VIDEO_ROSOLU_AVAIL = 0x16,
+ VIDEO_ROSOLU_SEL = 0x17,
+ VIDEO_CONT_PROTECT = 0x20,
+
+ VCR_TIMING_MODSEL = 0x21,
+ EXT_AUDIO_CAP = 0x22,
+ EXT_AUDIO_SEL = 0x23,
+ TEST_PATTERN_SEL = 0x24,
+ VBI_DATA_SEL = 0x25,
+ AUDIO_SAMPLE_RATE_CAP = 0x28,
+ AUDIO_SAMPLE_RATE_SEL = 0x29,
+ TUNER_AUD_MODE = 0x2a,
+ TUNER_AUD_MODE_AVAIL = 0x2b,
+ TUNER_AUD_ANA_STD = 0x2c,
+ TUNER_CUSTOM_PARAMETER = 0x2f,
+
+ DVBT_TUNE_MODE_SEL = 0x30,
+ DVBT_BANDW_CAP = 0x31,
+ DVBT_BANDW_SEL = 0x32,
+ DVBT_GUARD_INTERV_CAP = 0x33,
+ DVBT_GUARD_INTERV_SEL = 0x34,
+ DVBT_MODULATION_CAP = 0x35,
+ DVBT_MODULATION_SEL = 0x36,
+ DVBT_INNER_FEC_RATE_CAP = 0x37,
+ DVBT_INNER_FEC_RATE_SEL = 0x38,
+ DVBT_TRANS_MODE_CAP = 0x39,
+ DVBT_TRANS_MODE_SEL = 0x3a,
+ DVBT_SEARCH_RANG = 0x3c,
+
+ TUNER_SETUP_ANALOG = 0x40,
+ TUNER_SETUP_DIGITAL = 0x41,
+ TUNER_SETUP_FM_RADIO = 0x42,
+ TAKE_REQUEST = 0x43, /* Take effect of the command */
+ PLAY_SERVICE = 0x44, /* Play start or Play stop */
+ TUNER_STATUS = 0x45,
+ TUNE_PROP_DVBT = 0x46,
+ ERR_RATE_STATS = 0x47,
+ TUNER_BER_RATE = 0x48,
+
+ SCAN_CAPS = 0x50,
+ SCAN_SETUP = 0x51,
+ SCAN_SERVICE = 0x52,
+ SCAN_STATS = 0x53,
+
+ PID_SET = 0x58,
+ PID_UNSET = 0x59,
+ PID_LIST = 0x5a,
+
+ IRD_CAP = 0x60,
+ IRD_MODE_SEL = 0x61,
+ IRD_SETUP = 0x62,
+
+ PTM_MODE_CAP = 0x70,
+ PTM_MODE_SEL = 0x71,
+ PTM_SERVICE = 0x72,
+ TUNER_REG_SCRIPT = 0x73,
+ CMD_CHIP_RST = 0x74,
+};
+
+enum tlg_bw {
+ TLG_BW_5 = 5,
+ TLG_BW_6 = 6,
+ TLG_BW_7 = 7,
+ TLG_BW_8 = 8,
+ TLG_BW_12 = 12,
+ TLG_BW_15 = 15
+};
+
+struct cmd_firmware_vers_s {
+ uint8_t fw_rev_major;
+ uint8_t fw_rev_minor;
+ uint16_t fw_patch;
+};
+#endif /* VENDOR_CMD_H_ */
diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c
index 5b3eaa1..c4dab6c 100644
--- a/drivers/media/video/tuner-core.c
+++ b/drivers/media/video/tuner-core.c
@@ -1078,6 +1078,7 @@
goto register_client;
}
+ kfree(t);
return -ENODEV;
case 0x42:
case 0x43:
diff --git a/drivers/media/video/tveeprom.c b/drivers/media/video/tveeprom.c
index d533ea5..0a87749 100644
--- a/drivers/media/video/tveeprom.c
+++ b/drivers/media/video/tveeprom.c
@@ -680,10 +680,7 @@
tveeprom_info("Hauppauge model %d, rev %s, serial# %d\n",
tvee->model, tvee->rev_str, tvee->serial_number);
if (tvee->has_MAC_address == 1)
- tveeprom_info("MAC address is %02X-%02X-%02X-%02X-%02X-%02X\n",
- tvee->MAC_address[0], tvee->MAC_address[1],
- tvee->MAC_address[2], tvee->MAC_address[3],
- tvee->MAC_address[4], tvee->MAC_address[5]);
+ tveeprom_info("MAC address is %pM\n", tvee->MAC_address);
tveeprom_info("tuner model is %s (idx %d, type %d)\n",
t_name1, tuner1, tvee->tuner_type);
tveeprom_info("TV standards%s%s%s%s%s%s%s%s (eeprom 0x%02x)\n",
diff --git a/drivers/media/video/tvp7002.c b/drivers/media/video/tvp7002.c
new file mode 100644
index 0000000..5a878bc
--- /dev/null
+++ b/drivers/media/video/tvp7002.c
@@ -0,0 +1,1187 @@
+/* Texas Instruments Triple 8-/10-BIT 165-/110-MSPS Video and Graphics
+ * Digitizer with Horizontal PLL registers
+ *
+ * Copyright (C) 2009 Texas Instruments Inc
+ * Author: Santiago Nunez-Corrales <santiago.nunez@ridgerun.com>
+ *
+ * This code is partially based upon the TVP5150 driver
+ * written by Mauro Carvalho Chehab (mchehab@infradead.org),
+ * the TVP514x driver written by Vaibhav Hiremath <hvaibhav@ti.com>
+ * and the TVP7002 driver in the TI LSP 2.10.00.14. Revisions by
+ * Muralidharan Karicheri and Snehaprabha Narnakaje (TI).
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/videodev2.h>
+#include <media/tvp7002.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-chip-ident.h>
+#include <media/v4l2-common.h>
+#include "tvp7002_reg.h"
+
+MODULE_DESCRIPTION("TI TVP7002 Video and Graphics Digitizer driver");
+MODULE_AUTHOR("Santiago Nunez-Corrales <santiago.nunez@ridgerun.com>");
+MODULE_LICENSE("GPL");
+
+/* Module Name */
+#define TVP7002_MODULE_NAME "tvp7002"
+
+/* I2C retry attempts */
+#define I2C_RETRY_COUNT (5)
+
+/* End of registers */
+#define TVP7002_EOR 0x5c
+
+/* Read write definition for registers */
+#define TVP7002_READ 0
+#define TVP7002_WRITE 1
+#define TVP7002_RESERVED 2
+
+/* Interlaced vs progressive mask and shift */
+#define TVP7002_IP_SHIFT 5
+#define TVP7002_INPR_MASK (0x01 << TVP7002_IP_SHIFT)
+
+/* Shift for CPL and LPF registers */
+#define TVP7002_CL_SHIFT 8
+#define TVP7002_CL_MASK 0x0f
+
+/* Debug functions */
+static int debug;
+module_param(debug, bool, 0644);
+MODULE_PARM_DESC(debug, "Debug level (0-2)");
+
+/* Structure for register values */
+struct i2c_reg_value {
+ u8 reg;
+ u8 value;
+ u8 type;
+};
+
+/*
+ * Register default values (according to tvp7002 datasheet)
+ * In the case of read-only registers, the value (0xff) is
+ * never written. R/W functionality is controlled by the
+ * writable bit in the register struct definition.
+ */
+static const struct i2c_reg_value tvp7002_init_default[] = {
+ { TVP7002_CHIP_REV, 0xff, TVP7002_READ },
+ { TVP7002_HPLL_FDBK_DIV_MSBS, 0x67, TVP7002_WRITE },
+ { TVP7002_HPLL_FDBK_DIV_LSBS, 0x20, TVP7002_WRITE },
+ { TVP7002_HPLL_CRTL, 0xa0, TVP7002_WRITE },
+ { TVP7002_HPLL_PHASE_SEL, 0x80, TVP7002_WRITE },
+ { TVP7002_CLAMP_START, 0x32, TVP7002_WRITE },
+ { TVP7002_CLAMP_W, 0x20, TVP7002_WRITE },
+ { TVP7002_HSYNC_OUT_W, 0x60, TVP7002_WRITE },
+ { TVP7002_B_FINE_GAIN, 0x00, TVP7002_WRITE },
+ { TVP7002_G_FINE_GAIN, 0x00, TVP7002_WRITE },
+ { TVP7002_R_FINE_GAIN, 0x00, TVP7002_WRITE },
+ { TVP7002_B_FINE_OFF_MSBS, 0x80, TVP7002_WRITE },
+ { TVP7002_G_FINE_OFF_MSBS, 0x80, TVP7002_WRITE },
+ { TVP7002_R_FINE_OFF_MSBS, 0x80, TVP7002_WRITE },
+ { TVP7002_SYNC_CTL_1, 0x20, TVP7002_WRITE },
+ { TVP7002_HPLL_AND_CLAMP_CTL, 0x2e, TVP7002_WRITE },
+ { TVP7002_SYNC_ON_G_THRS, 0x5d, TVP7002_WRITE },
+ { TVP7002_SYNC_SEPARATOR_THRS, 0x47, TVP7002_WRITE },
+ { TVP7002_HPLL_PRE_COAST, 0x00, TVP7002_WRITE },
+ { TVP7002_HPLL_POST_COAST, 0x00, TVP7002_WRITE },
+ { TVP7002_SYNC_DETECT_STAT, 0xff, TVP7002_READ },
+ { TVP7002_OUT_FORMATTER, 0x47, TVP7002_WRITE },
+ { TVP7002_MISC_CTL_1, 0x01, TVP7002_WRITE },
+ { TVP7002_MISC_CTL_2, 0x00, TVP7002_WRITE },
+ { TVP7002_MISC_CTL_3, 0x01, TVP7002_WRITE },
+ { TVP7002_IN_MUX_SEL_1, 0x00, TVP7002_WRITE },
+ { TVP7002_IN_MUX_SEL_2, 0x67, TVP7002_WRITE },
+ { TVP7002_B_AND_G_COARSE_GAIN, 0x77, TVP7002_WRITE },
+ { TVP7002_R_COARSE_GAIN, 0x07, TVP7002_WRITE },
+ { TVP7002_FINE_OFF_LSBS, 0x00, TVP7002_WRITE },
+ { TVP7002_B_COARSE_OFF, 0x10, TVP7002_WRITE },
+ { TVP7002_G_COARSE_OFF, 0x10, TVP7002_WRITE },
+ { TVP7002_R_COARSE_OFF, 0x10, TVP7002_WRITE },
+ { TVP7002_HSOUT_OUT_START, 0x08, TVP7002_WRITE },
+ { TVP7002_MISC_CTL_4, 0x00, TVP7002_WRITE },
+ { TVP7002_B_DGTL_ALC_OUT_LSBS, 0xff, TVP7002_READ },
+ { TVP7002_G_DGTL_ALC_OUT_LSBS, 0xff, TVP7002_READ },
+ { TVP7002_R_DGTL_ALC_OUT_LSBS, 0xff, TVP7002_READ },
+ { TVP7002_AUTO_LVL_CTL_ENABLE, 0x80, TVP7002_WRITE },
+ { TVP7002_DGTL_ALC_OUT_MSBS, 0xff, TVP7002_READ },
+ { TVP7002_AUTO_LVL_CTL_FILTER, 0x53, TVP7002_WRITE },
+ { 0x29, 0x08, TVP7002_RESERVED },
+ { TVP7002_FINE_CLAMP_CTL, 0x07, TVP7002_WRITE },
+ /* PWR_CTL is controlled only by the probe and reset functions */
+ { TVP7002_PWR_CTL, 0x00, TVP7002_RESERVED },
+ { TVP7002_ADC_SETUP, 0x50, TVP7002_WRITE },
+ { TVP7002_COARSE_CLAMP_CTL, 0x00, TVP7002_WRITE },
+ { TVP7002_SOG_CLAMP, 0x80, TVP7002_WRITE },
+ { TVP7002_RGB_COARSE_CLAMP_CTL, 0x00, TVP7002_WRITE },
+ { TVP7002_SOG_COARSE_CLAMP_CTL, 0x04, TVP7002_WRITE },
+ { TVP7002_ALC_PLACEMENT, 0x5a, TVP7002_WRITE },
+ { 0x32, 0x18, TVP7002_RESERVED },
+ { 0x33, 0x60, TVP7002_RESERVED },
+ { TVP7002_MVIS_STRIPPER_W, 0xff, TVP7002_RESERVED },
+ { TVP7002_VSYNC_ALGN, 0x10, TVP7002_WRITE },
+ { TVP7002_SYNC_BYPASS, 0x00, TVP7002_WRITE },
+ { TVP7002_L_FRAME_STAT_LSBS, 0xff, TVP7002_READ },
+ { TVP7002_L_FRAME_STAT_MSBS, 0xff, TVP7002_READ },
+ { TVP7002_CLK_L_STAT_LSBS, 0xff, TVP7002_READ },
+ { TVP7002_CLK_L_STAT_MSBS, 0xff, TVP7002_READ },
+ { TVP7002_HSYNC_W, 0xff, TVP7002_READ },
+ { TVP7002_VSYNC_W, 0xff, TVP7002_READ },
+ { TVP7002_L_LENGTH_TOL, 0x03, TVP7002_WRITE },
+ { 0x3e, 0x60, TVP7002_RESERVED },
+ { TVP7002_VIDEO_BWTH_CTL, 0x01, TVP7002_WRITE },
+ { TVP7002_AVID_START_PIXEL_LSBS, 0x01, TVP7002_WRITE },
+ { TVP7002_AVID_START_PIXEL_MSBS, 0x2c, TVP7002_WRITE },
+ { TVP7002_AVID_STOP_PIXEL_LSBS, 0x06, TVP7002_WRITE },
+ { TVP7002_AVID_STOP_PIXEL_MSBS, 0x2c, TVP7002_WRITE },
+ { TVP7002_VBLK_F_0_START_L_OFF, 0x05, TVP7002_WRITE },
+ { TVP7002_VBLK_F_1_START_L_OFF, 0x00, TVP7002_WRITE },
+ { TVP7002_VBLK_F_0_DURATION, 0x1e, TVP7002_WRITE },
+ { TVP7002_VBLK_F_1_DURATION, 0x00, TVP7002_WRITE },
+ { TVP7002_FBIT_F_0_START_L_OFF, 0x00, TVP7002_WRITE },
+ { TVP7002_FBIT_F_1_START_L_OFF, 0x00, TVP7002_WRITE },
+ { TVP7002_YUV_Y_G_COEF_LSBS, 0xe3, TVP7002_WRITE },
+ { TVP7002_YUV_Y_G_COEF_MSBS, 0x16, TVP7002_WRITE },
+ { TVP7002_YUV_Y_B_COEF_LSBS, 0x4f, TVP7002_WRITE },
+ { TVP7002_YUV_Y_B_COEF_MSBS, 0x02, TVP7002_WRITE },
+ { TVP7002_YUV_Y_R_COEF_LSBS, 0xce, TVP7002_WRITE },
+ { TVP7002_YUV_Y_R_COEF_MSBS, 0x06, TVP7002_WRITE },
+ { TVP7002_YUV_U_G_COEF_LSBS, 0xab, TVP7002_WRITE },
+ { TVP7002_YUV_U_G_COEF_MSBS, 0xf3, TVP7002_WRITE },
+ { TVP7002_YUV_U_B_COEF_LSBS, 0x00, TVP7002_WRITE },
+ { TVP7002_YUV_U_B_COEF_MSBS, 0x10, TVP7002_WRITE },
+ { TVP7002_YUV_U_R_COEF_LSBS, 0x55, TVP7002_WRITE },
+ { TVP7002_YUV_U_R_COEF_MSBS, 0xfc, TVP7002_WRITE },
+ { TVP7002_YUV_V_G_COEF_LSBS, 0x78, TVP7002_WRITE },
+ { TVP7002_YUV_V_G_COEF_MSBS, 0xf1, TVP7002_WRITE },
+ { TVP7002_YUV_V_B_COEF_LSBS, 0x88, TVP7002_WRITE },
+ { TVP7002_YUV_V_B_COEF_MSBS, 0xfe, TVP7002_WRITE },
+ { TVP7002_YUV_V_R_COEF_LSBS, 0x00, TVP7002_WRITE },
+ { TVP7002_YUV_V_R_COEF_MSBS, 0x10, TVP7002_WRITE },
+ /* This signals end of register values */
+ { TVP7002_EOR, 0xff, TVP7002_RESERVED }
+};
+
+/* Register parameters for 480P */
+static const struct i2c_reg_value tvp7002_parms_480P[] = {
+ { TVP7002_HPLL_FDBK_DIV_MSBS, 0x35, TVP7002_WRITE },
+ { TVP7002_HPLL_FDBK_DIV_LSBS, 0x0a, TVP7002_WRITE },
+ { TVP7002_HPLL_CRTL, 0x02, TVP7002_WRITE },
+ { TVP7002_HPLL_PHASE_SEL, 0x14, TVP7002_WRITE },
+ { TVP7002_AVID_START_PIXEL_LSBS, 0x91, TVP7002_WRITE },
+ { TVP7002_AVID_START_PIXEL_MSBS, 0x00, TVP7002_WRITE },
+ { TVP7002_AVID_STOP_PIXEL_LSBS, 0x0B, TVP7002_WRITE },
+ { TVP7002_AVID_STOP_PIXEL_MSBS, 0x00, TVP7002_WRITE },
+ { TVP7002_VBLK_F_0_START_L_OFF, 0x03, TVP7002_WRITE },
+ { TVP7002_VBLK_F_1_START_L_OFF, 0x01, TVP7002_WRITE },
+ { TVP7002_VBLK_F_0_DURATION, 0x13, TVP7002_WRITE },
+ { TVP7002_VBLK_F_1_DURATION, 0x13, TVP7002_WRITE },
+ { TVP7002_ALC_PLACEMENT, 0x18, TVP7002_WRITE },
+ { TVP7002_CLAMP_START, 0x06, TVP7002_WRITE },
+ { TVP7002_CLAMP_W, 0x10, TVP7002_WRITE },
+ { TVP7002_HPLL_PRE_COAST, 0x03, TVP7002_WRITE },
+ { TVP7002_HPLL_POST_COAST, 0x03, TVP7002_WRITE },
+ { TVP7002_EOR, 0xff, TVP7002_RESERVED }
+};
+
+/* Register parameters for 576P */
+static const struct i2c_reg_value tvp7002_parms_576P[] = {
+ { TVP7002_HPLL_FDBK_DIV_MSBS, 0x36, TVP7002_WRITE },
+ { TVP7002_HPLL_FDBK_DIV_LSBS, 0x00, TVP7002_WRITE },
+ { TVP7002_HPLL_CRTL, 0x18, TVP7002_WRITE },
+ { TVP7002_HPLL_PHASE_SEL, 0x14, TVP7002_WRITE },
+ { TVP7002_AVID_START_PIXEL_LSBS, 0x9B, TVP7002_WRITE },
+ { TVP7002_AVID_START_PIXEL_MSBS, 0x00, TVP7002_WRITE },
+ { TVP7002_AVID_STOP_PIXEL_LSBS, 0x0F, TVP7002_WRITE },
+ { TVP7002_AVID_STOP_PIXEL_MSBS, 0x00, TVP7002_WRITE },
+ { TVP7002_VBLK_F_0_START_L_OFF, 0x00, TVP7002_WRITE },
+ { TVP7002_VBLK_F_1_START_L_OFF, 0x00, TVP7002_WRITE },
+ { TVP7002_VBLK_F_0_DURATION, 0x2D, TVP7002_WRITE },
+ { TVP7002_VBLK_F_1_DURATION, 0x00, TVP7002_WRITE },
+ { TVP7002_ALC_PLACEMENT, 0x18, TVP7002_WRITE },
+ { TVP7002_CLAMP_START, 0x06, TVP7002_WRITE },
+ { TVP7002_CLAMP_W, 0x10, TVP7002_WRITE },
+ { TVP7002_HPLL_PRE_COAST, 0x03, TVP7002_WRITE },
+ { TVP7002_HPLL_POST_COAST, 0x03, TVP7002_WRITE },
+ { TVP7002_EOR, 0xff, TVP7002_RESERVED }
+};
+
+/* Register parameters for 1080I60 */
+static const struct i2c_reg_value tvp7002_parms_1080I60[] = {
+ { TVP7002_HPLL_FDBK_DIV_MSBS, 0x89, TVP7002_WRITE },
+ { TVP7002_HPLL_FDBK_DIV_LSBS, 0x08, TVP7002_WRITE },
+ { TVP7002_HPLL_CRTL, 0x98, TVP7002_WRITE },
+ { TVP7002_HPLL_PHASE_SEL, 0x14, TVP7002_WRITE },
+ { TVP7002_AVID_START_PIXEL_LSBS, 0x06, TVP7002_WRITE },
+ { TVP7002_AVID_START_PIXEL_MSBS, 0x01, TVP7002_WRITE },
+ { TVP7002_AVID_STOP_PIXEL_LSBS, 0x8a, TVP7002_WRITE },
+ { TVP7002_AVID_STOP_PIXEL_MSBS, 0x08, TVP7002_WRITE },
+ { TVP7002_VBLK_F_0_START_L_OFF, 0x02, TVP7002_WRITE },
+ { TVP7002_VBLK_F_1_START_L_OFF, 0x02, TVP7002_WRITE },
+ { TVP7002_VBLK_F_0_DURATION, 0x16, TVP7002_WRITE },
+ { TVP7002_VBLK_F_1_DURATION, 0x17, TVP7002_WRITE },
+ { TVP7002_ALC_PLACEMENT, 0x5a, TVP7002_WRITE },
+ { TVP7002_CLAMP_START, 0x32, TVP7002_WRITE },
+ { TVP7002_CLAMP_W, 0x20, TVP7002_WRITE },
+ { TVP7002_HPLL_PRE_COAST, 0x01, TVP7002_WRITE },
+ { TVP7002_HPLL_POST_COAST, 0x00, TVP7002_WRITE },
+ { TVP7002_EOR, 0xff, TVP7002_RESERVED }
+};
+
+/* Register parameters for 1080P60 */
+static const struct i2c_reg_value tvp7002_parms_1080P60[] = {
+ { TVP7002_HPLL_FDBK_DIV_MSBS, 0x89, TVP7002_WRITE },
+ { TVP7002_HPLL_FDBK_DIV_LSBS, 0x08, TVP7002_WRITE },
+ { TVP7002_HPLL_CRTL, 0xE0, TVP7002_WRITE },
+ { TVP7002_HPLL_PHASE_SEL, 0x14, TVP7002_WRITE },
+ { TVP7002_AVID_START_PIXEL_LSBS, 0x06, TVP7002_WRITE },
+ { TVP7002_AVID_START_PIXEL_MSBS, 0x01, TVP7002_WRITE },
+ { TVP7002_AVID_STOP_PIXEL_LSBS, 0x8a, TVP7002_WRITE },
+ { TVP7002_AVID_STOP_PIXEL_MSBS, 0x08, TVP7002_WRITE },
+ { TVP7002_VBLK_F_0_START_L_OFF, 0x02, TVP7002_WRITE },
+ { TVP7002_VBLK_F_1_START_L_OFF, 0x02, TVP7002_WRITE },
+ { TVP7002_VBLK_F_0_DURATION, 0x16, TVP7002_WRITE },
+ { TVP7002_VBLK_F_1_DURATION, 0x17, TVP7002_WRITE },
+ { TVP7002_ALC_PLACEMENT, 0x5a, TVP7002_WRITE },
+ { TVP7002_CLAMP_START, 0x32, TVP7002_WRITE },
+ { TVP7002_CLAMP_W, 0x20, TVP7002_WRITE },
+ { TVP7002_HPLL_PRE_COAST, 0x01, TVP7002_WRITE },
+ { TVP7002_HPLL_POST_COAST, 0x00, TVP7002_WRITE },
+ { TVP7002_EOR, 0xff, TVP7002_RESERVED }
+};
+
+/* Register parameters for 1080I50 */
+static const struct i2c_reg_value tvp7002_parms_1080I50[] = {
+ { TVP7002_HPLL_FDBK_DIV_MSBS, 0xa5, TVP7002_WRITE },
+ { TVP7002_HPLL_FDBK_DIV_LSBS, 0x00, TVP7002_WRITE },
+ { TVP7002_HPLL_CRTL, 0x98, TVP7002_WRITE },
+ { TVP7002_HPLL_PHASE_SEL, 0x14, TVP7002_WRITE },
+ { TVP7002_AVID_START_PIXEL_LSBS, 0x06, TVP7002_WRITE },
+ { TVP7002_AVID_START_PIXEL_MSBS, 0x01, TVP7002_WRITE },
+ { TVP7002_AVID_STOP_PIXEL_LSBS, 0x8a, TVP7002_WRITE },
+ { TVP7002_AVID_STOP_PIXEL_MSBS, 0x08, TVP7002_WRITE },
+ { TVP7002_VBLK_F_0_START_L_OFF, 0x02, TVP7002_WRITE },
+ { TVP7002_VBLK_F_1_START_L_OFF, 0x02, TVP7002_WRITE },
+ { TVP7002_VBLK_F_0_DURATION, 0x16, TVP7002_WRITE },
+ { TVP7002_VBLK_F_1_DURATION, 0x17, TVP7002_WRITE },
+ { TVP7002_ALC_PLACEMENT, 0x5a, TVP7002_WRITE },
+ { TVP7002_CLAMP_START, 0x32, TVP7002_WRITE },
+ { TVP7002_CLAMP_W, 0x20, TVP7002_WRITE },
+ { TVP7002_HPLL_PRE_COAST, 0x01, TVP7002_WRITE },
+ { TVP7002_HPLL_POST_COAST, 0x00, TVP7002_WRITE },
+ { TVP7002_EOR, 0xff, TVP7002_RESERVED }
+};
+
+/* Register parameters for 720P60 */
+static const struct i2c_reg_value tvp7002_parms_720P60[] = {
+ { TVP7002_HPLL_FDBK_DIV_MSBS, 0x67, TVP7002_WRITE },
+ { TVP7002_HPLL_FDBK_DIV_LSBS, 0x02, TVP7002_WRITE },
+ { TVP7002_HPLL_CRTL, 0xa0, TVP7002_WRITE },
+ { TVP7002_HPLL_PHASE_SEL, 0x16, TVP7002_WRITE },
+ { TVP7002_AVID_START_PIXEL_LSBS, 0x47, TVP7002_WRITE },
+ { TVP7002_AVID_START_PIXEL_MSBS, 0x01, TVP7002_WRITE },
+ { TVP7002_AVID_STOP_PIXEL_LSBS, 0x4B, TVP7002_WRITE },
+ { TVP7002_AVID_STOP_PIXEL_MSBS, 0x06, TVP7002_WRITE },
+ { TVP7002_VBLK_F_0_START_L_OFF, 0x05, TVP7002_WRITE },
+ { TVP7002_VBLK_F_1_START_L_OFF, 0x00, TVP7002_WRITE },
+ { TVP7002_VBLK_F_0_DURATION, 0x2D, TVP7002_WRITE },
+ { TVP7002_VBLK_F_1_DURATION, 0x00, TVP7002_WRITE },
+ { TVP7002_ALC_PLACEMENT, 0x5a, TVP7002_WRITE },
+ { TVP7002_CLAMP_START, 0x32, TVP7002_WRITE },
+ { TVP7002_CLAMP_W, 0x20, TVP7002_WRITE },
+ { TVP7002_HPLL_PRE_COAST, 0x00, TVP7002_WRITE },
+ { TVP7002_HPLL_POST_COAST, 0x00, TVP7002_WRITE },
+ { TVP7002_EOR, 0xff, TVP7002_RESERVED }
+};
+
+/* Register parameters for 720P50 */
+static const struct i2c_reg_value tvp7002_parms_720P50[] = {
+ { TVP7002_HPLL_FDBK_DIV_MSBS, 0x7b, TVP7002_WRITE },
+ { TVP7002_HPLL_FDBK_DIV_LSBS, 0x0c, TVP7002_WRITE },
+ { TVP7002_HPLL_CRTL, 0x98, TVP7002_WRITE },
+ { TVP7002_HPLL_PHASE_SEL, 0x16, TVP7002_WRITE },
+ { TVP7002_AVID_START_PIXEL_LSBS, 0x47, TVP7002_WRITE },
+ { TVP7002_AVID_START_PIXEL_MSBS, 0x01, TVP7002_WRITE },
+ { TVP7002_AVID_STOP_PIXEL_LSBS, 0x4B, TVP7002_WRITE },
+ { TVP7002_AVID_STOP_PIXEL_MSBS, 0x06, TVP7002_WRITE },
+ { TVP7002_VBLK_F_0_START_L_OFF, 0x05, TVP7002_WRITE },
+ { TVP7002_VBLK_F_1_START_L_OFF, 0x00, TVP7002_WRITE },
+ { TVP7002_VBLK_F_0_DURATION, 0x2D, TVP7002_WRITE },
+ { TVP7002_VBLK_F_1_DURATION, 0x00, TVP7002_WRITE },
+ { TVP7002_ALC_PLACEMENT, 0x5a, TVP7002_WRITE },
+ { TVP7002_CLAMP_START, 0x32, TVP7002_WRITE },
+ { TVP7002_CLAMP_W, 0x20, TVP7002_WRITE },
+ { TVP7002_HPLL_PRE_COAST, 0x01, TVP7002_WRITE },
+ { TVP7002_HPLL_POST_COAST, 0x00, TVP7002_WRITE },
+ { TVP7002_EOR, 0xff, TVP7002_RESERVED }
+};
+
+/* Struct list for available formats */
+static const struct v4l2_fmtdesc tvp7002_fmt_list[] = {
+ {
+ .index = 0,
+ .type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
+ .flags = 0,
+ .description = "8-bit UYVY 4:2:2 Format",
+ .pixelformat = V4L2_PIX_FMT_UYVY,
+ },
+};
+
+#define NUM_FORMATS ARRAY_SIZE(tvp7002_fmt_list)
+
+/* Preset definition for handling device operation */
+struct tvp7002_preset_definition {
+ u32 preset;
+ const struct i2c_reg_value *p_settings;
+ enum v4l2_colorspace color_space;
+ enum v4l2_field scanmode;
+ u16 progressive;
+ u16 lines_per_frame;
+ u16 cpl_min;
+ u16 cpl_max;
+};
+
+/* Struct list for digital video presets */
+static const struct tvp7002_preset_definition tvp7002_presets[] = {
+ {
+ V4L2_DV_720P60,
+ tvp7002_parms_720P60,
+ V4L2_COLORSPACE_REC709,
+ V4L2_FIELD_NONE,
+ 1,
+ 0x2EE,
+ 135,
+ 153
+ },
+ {
+ V4L2_DV_1080I60,
+ tvp7002_parms_1080I60,
+ V4L2_COLORSPACE_REC709,
+ V4L2_FIELD_INTERLACED,
+ 0,
+ 0x465,
+ 181,
+ 205
+ },
+ {
+ V4L2_DV_1080I50,
+ tvp7002_parms_1080I50,
+ V4L2_COLORSPACE_REC709,
+ V4L2_FIELD_INTERLACED,
+ 0,
+ 0x465,
+ 217,
+ 245
+ },
+ {
+ V4L2_DV_720P50,
+ tvp7002_parms_720P50,
+ V4L2_COLORSPACE_REC709,
+ V4L2_FIELD_NONE,
+ 1,
+ 0x2EE,
+ 163,
+ 183
+ },
+ {
+ V4L2_DV_1080P60,
+ tvp7002_parms_1080P60,
+ V4L2_COLORSPACE_REC709,
+ V4L2_FIELD_NONE,
+ 1,
+ 0x465,
+ 90,
+ 102
+ },
+ {
+ V4L2_DV_480P59_94,
+ tvp7002_parms_480P,
+ V4L2_COLORSPACE_SMPTE170M,
+ V4L2_FIELD_NONE,
+ 1,
+ 0x20D,
+ 0xffff,
+ 0xffff
+ },
+ {
+ V4L2_DV_576P50,
+ tvp7002_parms_576P,
+ V4L2_COLORSPACE_SMPTE170M,
+ V4L2_FIELD_NONE,
+ 1,
+ 0x271,
+ 0xffff,
+ 0xffff
+ }
+};
+
+#define NUM_PRESETS ARRAY_SIZE(tvp7002_presets)
+
+/* Device definition */
+struct tvp7002 {
+ struct v4l2_subdev sd;
+ const struct tvp7002_config *pdata;
+
+ int ver;
+ int streaming;
+
+ struct v4l2_pix_format pix;
+ const struct tvp7002_preset_definition *current_preset;
+ u8 gain;
+};
+
+/*
+ * to_tvp7002 - Obtain device handler TVP7002
+ * @sd: ptr to v4l2_subdev struct
+ *
+ * Returns device handler tvp7002.
+ */
+static inline struct tvp7002 *to_tvp7002(struct v4l2_subdev *sd)
+{
+ return container_of(sd, struct tvp7002, sd);
+}
+
+/*
+ * tvp7002_read - Read a value from a register in an TVP7002
+ * @sd: ptr to v4l2_subdev struct
+ * @reg: TVP7002 register address
+ * @dst: pointer to 8-bit destination
+ *
+ * Returns value read if successful, or non-zero (-1) otherwise.
+ */
+static int tvp7002_read(struct v4l2_subdev *sd, u8 addr, u8 *dst)
+{
+ struct i2c_client *c = v4l2_get_subdevdata(sd);
+ int retry;
+ int error;
+
+ for (retry = 0; retry < I2C_RETRY_COUNT; retry++) {
+ error = i2c_smbus_read_byte_data(c, addr);
+
+ if (error >= 0) {
+ *dst = (u8)error;
+ return 0;
+ }
+
+ msleep_interruptible(10);
+ }
+ v4l2_err(sd, "TVP7002 read error %d\n", error);
+ return error;
+}
+
+/*
+ * tvp7002_read_err() - Read a register value with error code
+ * @sd: pointer to standard V4L2 sub-device structure
+ * @reg: destination register
+ * @val: value to be read
+ * @error: pointer to error value
+ *
+ * Read a value in a register and save error value in pointer.
+ * Also update the register table if successful
+ */
+static inline void tvp7002_read_err(struct v4l2_subdev *sd, u8 reg,
+ u8 *dst, int *err)
+{
+ if (!*err)
+ *err = tvp7002_read(sd, reg, dst);
+}
+
+/*
+ * tvp7002_write() - Write a value to a register in TVP7002
+ * @sd: ptr to v4l2_subdev struct
+ * @addr: TVP7002 register address
+ * @value: value to be written to the register
+ *
+ * Write a value to a register in an TVP7002 decoder device.
+ * Returns zero if successful, or non-zero otherwise.
+ */
+static int tvp7002_write(struct v4l2_subdev *sd, u8 addr, u8 value)
+{
+ struct i2c_client *c;
+ int retry;
+ int error;
+
+ c = v4l2_get_subdevdata(sd);
+
+ for (retry = 0; retry < I2C_RETRY_COUNT; retry++) {
+ error = i2c_smbus_write_byte_data(c, addr, value);
+
+ if (error >= 0)
+ return 0;
+
+ v4l2_warn(sd, "Write: retry ... %d\n", retry);
+ msleep_interruptible(10);
+ }
+ v4l2_err(sd, "TVP7002 write error %d\n", error);
+ return error;
+}
+
+/*
+ * tvp7002_write_err() - Write a register value with error code
+ * @sd: pointer to standard V4L2 sub-device structure
+ * @reg: destination register
+ * @val: value to be written
+ * @error: pointer to error value
+ *
+ * Write a value in a register and save error value in pointer.
+ * Also update the register table if successful
+ */
+static inline void tvp7002_write_err(struct v4l2_subdev *sd, u8 reg,
+ u8 val, int *err)
+{
+ if (!*err)
+ *err = tvp7002_write(sd, reg, val);
+}
+
+/*
+ * tvp7002_g_chip_ident() - Get chip identification number
+ * @sd: ptr to v4l2_subdev struct
+ * @chip: ptr to v4l2_dbg_chip_ident struct
+ *
+ * Obtains the chip's identification number.
+ * Returns zero or -EINVAL if read operation fails.
+ */
+static int tvp7002_g_chip_ident(struct v4l2_subdev *sd,
+ struct v4l2_dbg_chip_ident *chip)
+{
+ u8 rev;
+ int error;
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+ error = tvp7002_read(sd, TVP7002_CHIP_REV, &rev);
+
+ if (error < 0)
+ return error;
+
+ return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_TVP7002, rev);
+}
+
+/*
+ * tvp7002_write_inittab() - Write initialization values
+ * @sd: ptr to v4l2_subdev struct
+ * @regs: ptr to i2c_reg_value struct
+ *
+ * Write initialization values.
+ * Returns zero or -EINVAL if read operation fails.
+ */
+static int tvp7002_write_inittab(struct v4l2_subdev *sd,
+ const struct i2c_reg_value *regs)
+{
+ int error = 0;
+
+ /* Initialize the first (defined) registers */
+ while (TVP7002_EOR != regs->reg) {
+ if (TVP7002_WRITE == regs->type)
+ tvp7002_write_err(sd, regs->reg, regs->value, &error);
+ regs++;
+ }
+
+ return error;
+}
+
+/*
+ * tvp7002_s_dv_preset() - Set digital video preset
+ * @sd: ptr to v4l2_subdev struct
+ * @std: ptr to v4l2_dv_preset struct
+ *
+ * Set the digital video preset for a TVP7002 decoder device.
+ * Returns zero when successful or -EINVAL if register access fails.
+ */
+static int tvp7002_s_dv_preset(struct v4l2_subdev *sd,
+ struct v4l2_dv_preset *dv_preset)
+{
+ struct tvp7002 *device = to_tvp7002(sd);
+ u32 preset;
+ int i;
+
+ for (i = 0; i < NUM_PRESETS; i++) {
+ preset = tvp7002_presets[i].preset;
+ if (preset == dv_preset->preset) {
+ device->current_preset = &tvp7002_presets[i];
+ return tvp7002_write_inittab(sd, tvp7002_presets[i].p_settings);
+ }
+ }
+
+ return -EINVAL;
+}
+
+/*
+ * tvp7002_g_ctrl() - Get a control
+ * @sd: ptr to v4l2_subdev struct
+ * @ctrl: ptr to v4l2_control struct
+ *
+ * Get a control for a TVP7002 decoder device.
+ * Returns zero when successful or -EINVAL if register access fails.
+ */
+static int tvp7002_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+{
+ struct tvp7002 *device = to_tvp7002(sd);
+
+ switch (ctrl->id) {
+ case V4L2_CID_GAIN:
+ ctrl->value = device->gain;
+ return 0;
+ default:
+ return -EINVAL;
+ }
+}
+
+/*
+ * tvp7002_s_ctrl() - Set a control
+ * @sd: ptr to v4l2_subdev struct
+ * @ctrl: ptr to v4l2_control struct
+ *
+ * Set a control in TVP7002 decoder device.
+ * Returns zero when successful or -EINVAL if register access fails.
+ */
+static int tvp7002_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+{
+ struct tvp7002 *device = to_tvp7002(sd);
+ int error = 0;
+
+ switch (ctrl->id) {
+ case V4L2_CID_GAIN:
+ tvp7002_write_err(sd, TVP7002_R_FINE_GAIN,
+ ctrl->value & 0xff, &error);
+ tvp7002_write_err(sd, TVP7002_G_FINE_GAIN,
+ ctrl->value & 0xff, &error);
+ tvp7002_write_err(sd, TVP7002_B_FINE_GAIN,
+ ctrl->value & 0xff, &error);
+
+ if (error < 0)
+ return error;
+
+ /* Set only after knowing there is no error */
+ device->gain = ctrl->value & 0xff;
+ return 0;
+ default:
+ return -EINVAL;
+ }
+}
+
+/*
+ * tvp7002_queryctrl() - Query a control
+ * @sd: ptr to v4l2_subdev struct
+ * @ctrl: ptr to v4l2_queryctrl struct
+ *
+ * Query a control of a TVP7002 decoder device.
+ * Returns zero when successful or -EINVAL if register read fails.
+ */
+static int tvp7002_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc)
+{
+ switch (qc->id) {
+ case V4L2_CID_GAIN:
+ /*
+ * Gain is supported [0-255, default=0, step=1]
+ */
+ return v4l2_ctrl_query_fill(qc, 0, 255, 1, 0);
+ default:
+ return -EINVAL;
+ }
+}
+
+/*
+ * tvp7002_try_fmt_cap() - V4L2 decoder interface handler for try_fmt
+ * @sd: pointer to standard V4L2 sub-device structure
+ * @f: pointer to standard V4L2 VIDIOC_TRY_FMT ioctl structure
+ *
+ * Implement the VIDIOC_TRY_FMT ioctl for the CAPTURE buffer type. This
+ * ioctl is used to negotiate the image capture size and pixel format
+ * without actually making it take effect.
+ */
+static int tvp7002_try_fmt_cap(struct v4l2_subdev *sd, struct v4l2_format *f)
+{
+ struct tvp7002 *device = to_tvp7002(sd);
+ struct v4l2_dv_enum_preset e_preset;
+ struct v4l2_pix_format *pix;
+ int error = 0;
+
+ pix = &f->fmt.pix;
+
+ /* Calculate height and width based on current standard */
+ error = v4l_fill_dv_preset_info(device->current_preset->preset, &e_preset);
+ if (error)
+ return -EINVAL;
+
+ pix->width = e_preset.width;
+ pix->height = e_preset.height;
+ pix->pixelformat = V4L2_PIX_FMT_UYVY;
+ pix->field = device->current_preset->scanmode;
+ pix->bytesperline = pix->width * 2;
+ pix->sizeimage = pix->bytesperline * pix->height;
+ pix->colorspace = device->current_preset->color_space;
+ pix->priv = 0;
+
+ v4l2_dbg(1, debug, sd, "Try FMT: pixelformat - %s, bytesperline - %d"
+ "Width - %d, Height - %d", "8-bit UYVY 4:2:2 Format",
+ pix->bytesperline, pix->width, pix->height);
+ return error;
+}
+
+/*
+ * tvp7002_s_fmt() - V4L2 decoder interface handler for s_fmt
+ * @sd: pointer to standard V4L2 sub-device structure
+ * @f: pointer to standard V4L2 VIDIOC_S_FMT ioctl structure
+ *
+ * If the requested format is supported, configures the HW to use that
+ * format, returns error code if format not supported or HW can't be
+ * correctly configured.
+ */
+static int tvp7002_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *f)
+{
+ struct tvp7002 *decoder = to_tvp7002(sd);
+ int rval;
+
+ rval = tvp7002_try_fmt_cap(sd, f);
+ if (!rval)
+ decoder->pix = f->fmt.pix;
+ return rval;
+}
+
+/*
+ * tvp7002_g_fmt() - V4L2 decoder interface handler for tvp7002_g_fmt
+ * @sd: pointer to standard V4L2 sub-device structure
+ * @f: pointer to standard V4L2 v4l2_format structure
+ *
+ * Returns the decoder's current pixel format in the v4l2_format
+ * parameter.
+ */
+static int tvp7002_g_fmt(struct v4l2_subdev *sd, struct v4l2_format *f)
+{
+ struct tvp7002 *decoder = to_tvp7002(sd);
+
+ f->fmt.pix = decoder->pix;
+
+ v4l2_dbg(1, debug, sd, "Current FMT: bytesperline - %d"
+ "Width - %d, Height - %d",
+ decoder->pix.bytesperline,
+ decoder->pix.width, decoder->pix.height);
+ return 0;
+}
+
+/*
+ * tvp7002_query_dv_preset() - query DV preset
+ * @sd: pointer to standard V4L2 sub-device structure
+ * @std_id: standard V4L2 v4l2_dv_preset
+ *
+ * Returns the current DV preset by TVP7002. If no active input is
+ * detected, returns -EINVAL
+ */
+static int tvp7002_query_dv_preset(struct v4l2_subdev *sd,
+ struct v4l2_dv_preset *qpreset)
+{
+ const struct tvp7002_preset_definition *presets = tvp7002_presets;
+ struct v4l2_dv_enum_preset e_preset;
+ struct tvp7002 *device;
+ u8 progressive;
+ u32 lpfr;
+ u32 cpln;
+ int error = 0;
+ u8 lpf_lsb;
+ u8 lpf_msb;
+ u8 cpl_lsb;
+ u8 cpl_msb;
+ int index;
+
+ device = to_tvp7002(sd);
+
+ /* Read standards from device registers */
+ tvp7002_read_err(sd, TVP7002_L_FRAME_STAT_LSBS, &lpf_lsb, &error);
+ tvp7002_read_err(sd, TVP7002_L_FRAME_STAT_MSBS, &lpf_msb, &error);
+
+ if (error < 0)
+ return error;
+
+ tvp7002_read_err(sd, TVP7002_CLK_L_STAT_LSBS, &cpl_lsb, &error);
+ tvp7002_read_err(sd, TVP7002_CLK_L_STAT_MSBS, &cpl_msb, &error);
+
+ if (error < 0)
+ return error;
+
+ /* Get lines per frame, clocks per line and interlaced/progresive */
+ lpfr = lpf_lsb | ((TVP7002_CL_MASK & lpf_msb) << TVP7002_CL_SHIFT);
+ cpln = cpl_lsb | ((TVP7002_CL_MASK & cpl_msb) << TVP7002_CL_SHIFT);
+ progressive = (lpf_msb & TVP7002_INPR_MASK) >> TVP7002_IP_SHIFT;
+
+ /* Do checking of video modes */
+ for (index = 0; index < NUM_PRESETS; index++, presets++)
+ if (lpfr == presets->lines_per_frame &&
+ progressive == presets->progressive) {
+ if (presets->cpl_min == 0xffff)
+ break;
+ if (cpln >= presets->cpl_min && cpln <= presets->cpl_max)
+ break;
+ }
+
+ if (index == NUM_PRESETS) {
+ v4l2_err(sd, "querystd error, lpf = %x, cpl = %x\n",
+ lpfr, cpln);
+ return -EINVAL;
+ }
+
+ if (v4l_fill_dv_preset_info(presets->preset, &e_preset))
+ return -EINVAL;
+
+ /* Set values in found preset */
+ qpreset->preset = presets->preset;
+
+ /* Update lines per frame and clocks per line info */
+ v4l2_dbg(1, debug, sd, "Current preset: %d %d",
+ e_preset.width, e_preset.height);
+ return 0;
+}
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+/*
+ * tvp7002_g_register() - Get the value of a register
+ * @sd: ptr to v4l2_subdev struct
+ * @vreg: ptr to v4l2_dbg_register struct
+ *
+ * Get the value of a TVP7002 decoder device register.
+ * Returns zero when successful, -EINVAL if register read fails or
+ * access to I2C client fails, -EPERM if the call is not allowed
+ * by diabled CAP_SYS_ADMIN.
+ */
+static int tvp7002_g_register(struct v4l2_subdev *sd,
+ struct v4l2_dbg_register *reg)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ u8 val;
+ int ret;
+
+ if (!v4l2_chip_match_i2c_client(client, ®->match))
+ return -EINVAL;
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+
+ ret = tvp7002_read(sd, reg->reg & 0xff, &val);
+ reg->val = val;
+ return ret;
+}
+
+/*
+ * tvp7002_s_register() - set a control
+ * @sd: ptr to v4l2_subdev struct
+ * @ctrl: ptr to v4l2_control struct
+ *
+ * Get the value of a TVP7002 decoder device register.
+ * Returns zero when successful, -EINVAL if register read fails or
+ * -EPERM if call not allowed.
+ */
+static int tvp7002_s_register(struct v4l2_subdev *sd,
+ struct v4l2_dbg_register *reg)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+ if (!v4l2_chip_match_i2c_client(client, ®->match))
+ return -EINVAL;
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+
+ return tvp7002_write(sd, reg->reg & 0xff, reg->val & 0xff);
+}
+#endif
+
+/*
+ * tvp7002_enum_fmt() - Enum supported formats
+ * @sd: pointer to standard V4L2 sub-device structure
+ * @enable: pointer to format struct
+ *
+ * Enumerate supported formats.
+ */
+
+static int tvp7002_enum_fmt(struct v4l2_subdev *sd,
+ struct v4l2_fmtdesc *fmtdesc)
+{
+ /* Check requested format index is within range */
+ if (fmtdesc->index < 0 || fmtdesc->index >= NUM_FORMATS)
+ return -EINVAL;
+ *fmtdesc = tvp7002_fmt_list[fmtdesc->index];
+
+ return 0;
+}
+
+/*
+ * tvp7002_s_stream() - V4L2 decoder i/f handler for s_stream
+ * @sd: pointer to standard V4L2 sub-device structure
+ * @enable: streaming enable or disable
+ *
+ * Sets streaming to enable or disable, if possible.
+ */
+static int tvp7002_s_stream(struct v4l2_subdev *sd, int enable)
+{
+ struct tvp7002 *device = to_tvp7002(sd);
+ int error = 0;
+
+ if (device->streaming == enable)
+ return 0;
+
+ if (enable) {
+ /* Set output state on (low impedance means stream on) */
+ error = tvp7002_write(sd, TVP7002_MISC_CTL_2, 0x00);
+ device->streaming = enable;
+ } else {
+ /* Set output state off (high impedance means stream off) */
+ error = tvp7002_write(sd, TVP7002_MISC_CTL_2, 0x03);
+ if (error)
+ v4l2_dbg(1, debug, sd, "Unable to stop streaming\n");
+
+ device->streaming = enable;
+ }
+
+ return error;
+}
+
+/*
+ * tvp7002_log_status() - Print information about register settings
+ * @sd: ptr to v4l2_subdev struct
+ *
+ * Log register values of a TVP7002 decoder device.
+ * Returns zero or -EINVAL if read operation fails.
+ */
+static int tvp7002_log_status(struct v4l2_subdev *sd)
+{
+ const struct tvp7002_preset_definition *presets = tvp7002_presets;
+ struct tvp7002 *device = to_tvp7002(sd);
+ struct v4l2_dv_enum_preset e_preset;
+ struct v4l2_dv_preset detected;
+ int i;
+
+ detected.preset = V4L2_DV_INVALID;
+ /* Find my current standard*/
+ tvp7002_query_dv_preset(sd, &detected);
+
+ /* Print standard related code values */
+ for (i = 0; i < NUM_PRESETS; i++, presets++)
+ if (presets->preset == detected.preset)
+ break;
+
+ if (v4l_fill_dv_preset_info(device->current_preset->preset, &e_preset))
+ return -EINVAL;
+
+ v4l2_info(sd, "Selected DV Preset: %s\n", e_preset.name);
+ v4l2_info(sd, " Pixels per line: %u\n", e_preset.width);
+ v4l2_info(sd, " Lines per frame: %u\n\n", e_preset.height);
+ if (i == NUM_PRESETS) {
+ v4l2_info(sd, "Detected DV Preset: None\n");
+ } else {
+ if (v4l_fill_dv_preset_info(presets->preset, &e_preset))
+ return -EINVAL;
+ v4l2_info(sd, "Detected DV Preset: %s\n", e_preset.name);
+ v4l2_info(sd, " Pixels per line: %u\n", e_preset.width);
+ v4l2_info(sd, " Lines per frame: %u\n\n", e_preset.height);
+ }
+ v4l2_info(sd, "Streaming enabled: %s\n",
+ device->streaming ? "yes" : "no");
+
+ /* Print the current value of the gain control */
+ v4l2_info(sd, "Gain: %u\n", device->gain);
+
+ return 0;
+}
+
+/* V4L2 core operation handlers */
+static const struct v4l2_subdev_core_ops tvp7002_core_ops = {
+ .g_chip_ident = tvp7002_g_chip_ident,
+ .log_status = tvp7002_log_status,
+ .g_ctrl = tvp7002_g_ctrl,
+ .s_ctrl = tvp7002_s_ctrl,
+ .queryctrl = tvp7002_queryctrl,
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+ .g_register = tvp7002_g_register,
+ .s_register = tvp7002_s_register,
+#endif
+};
+
+/* Specific video subsystem operation handlers */
+static const struct v4l2_subdev_video_ops tvp7002_video_ops = {
+ .s_dv_preset = tvp7002_s_dv_preset,
+ .query_dv_preset = tvp7002_query_dv_preset,
+ .s_stream = tvp7002_s_stream,
+ .g_fmt = tvp7002_g_fmt,
+ .s_fmt = tvp7002_s_fmt,
+ .enum_fmt = tvp7002_enum_fmt,
+};
+
+/* V4L2 top level operation handlers */
+static const struct v4l2_subdev_ops tvp7002_ops = {
+ .core = &tvp7002_core_ops,
+ .video = &tvp7002_video_ops,
+};
+
+static struct tvp7002 tvp7002_dev = {
+ .streaming = 0,
+
+ .pix = {
+ .width = 1280,
+ .height = 720,
+ .pixelformat = V4L2_PIX_FMT_UYVY,
+ .field = V4L2_FIELD_NONE,
+ .bytesperline = 1280 * 2,
+ .sizeimage = 1280 * 2 * 720,
+ .colorspace = V4L2_COLORSPACE_REC709,
+ },
+
+ .current_preset = tvp7002_presets,
+ .gain = 0,
+};
+
+/*
+ * tvp7002_probe - Probe a TVP7002 device
+ * @sd: ptr to v4l2_subdev struct
+ * @ctrl: ptr to i2c_device_id struct
+ *
+ * Initialize the TVP7002 device
+ * Returns zero when successful, -EINVAL if register read fails or
+ * -EIO if i2c access is not available.
+ */
+static int tvp7002_probe(struct i2c_client *c, const struct i2c_device_id *id)
+{
+ struct v4l2_subdev *sd;
+ struct tvp7002 *device;
+ struct v4l2_dv_preset preset;
+ int polarity_a;
+ int polarity_b;
+ u8 revision;
+
+ int error;
+
+ /* Check if the adapter supports the needed features */
+ if (!i2c_check_functionality(c->adapter,
+ I2C_FUNC_SMBUS_READ_BYTE | I2C_FUNC_SMBUS_WRITE_BYTE_DATA))
+ return -EIO;
+
+ if (!c->dev.platform_data) {
+ v4l_err(c, "No platform data!!\n");
+ return -ENODEV;
+ }
+
+ device = kmalloc(sizeof(struct tvp7002), GFP_KERNEL);
+
+ if (!device)
+ return -ENOMEM;
+
+ *device = tvp7002_dev;
+ sd = &device->sd;
+ device->pdata = c->dev.platform_data;
+
+ /* Tell v4l2 the device is ready */
+ v4l2_i2c_subdev_init(sd, c, &tvp7002_ops);
+ v4l_info(c, "tvp7002 found @ 0x%02x (%s)\n",
+ c->addr, c->adapter->name);
+
+ error = tvp7002_read(sd, TVP7002_CHIP_REV, &revision);
+ if (error < 0)
+ goto found_error;
+
+ /* Get revision number */
+ v4l2_info(sd, "Rev. %02x detected.\n", revision);
+ if (revision != 0x02)
+ v4l2_info(sd, "Unknown revision detected.\n");
+
+ /* Initializes TVP7002 to its default values */
+ error = tvp7002_write_inittab(sd, tvp7002_init_default);
+
+ if (error < 0)
+ goto found_error;
+
+ /* Set polarity information after registers have been set */
+ polarity_a = 0x20 | device->pdata->hs_polarity << 5
+ | device->pdata->vs_polarity << 2;
+ error = tvp7002_write(sd, TVP7002_SYNC_CTL_1, polarity_a);
+ if (error < 0)
+ goto found_error;
+
+ polarity_b = 0x01 | device->pdata->fid_polarity << 2
+ | device->pdata->sog_polarity << 1
+ | device->pdata->clk_polarity;
+ error = tvp7002_write(sd, TVP7002_MISC_CTL_3, polarity_b);
+ if (error < 0)
+ goto found_error;
+
+ /* Set registers according to default video mode */
+ preset.preset = device->current_preset->preset;
+ error = tvp7002_s_dv_preset(sd, &preset);
+
+found_error:
+ if (error < 0)
+ kfree(device);
+
+ return error;
+}
+
+/*
+ * tvp7002_remove - Remove TVP7002 device support
+ * @c: ptr to i2c_client struct
+ *
+ * Reset the TVP7002 device
+ * Returns zero.
+ */
+static int tvp7002_remove(struct i2c_client *c)
+{
+ struct v4l2_subdev *sd = i2c_get_clientdata(c);
+ struct tvp7002 *device = to_tvp7002(sd);
+
+ v4l2_dbg(1, debug, sd, "Removing tvp7002 adapter"
+ "on address 0x%x\n", c->addr);
+
+ v4l2_device_unregister_subdev(sd);
+ kfree(device);
+ return 0;
+}
+
+/* I2C Device ID table */
+static const struct i2c_device_id tvp7002_id[] = {
+ { "tvp7002", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, tvp7002_id);
+
+/* I2C driver data */
+static struct i2c_driver tvp7002_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = TVP7002_MODULE_NAME,
+ },
+ .probe = tvp7002_probe,
+ .remove = tvp7002_remove,
+ .id_table = tvp7002_id,
+};
+
+/*
+ * tvp7002_init - Initialize driver via I2C interface
+ *
+ * Register the TVP7002 driver.
+ * Return 0 on success or error code on failure.
+ */
+static int __init tvp7002_init(void)
+{
+ return i2c_add_driver(&tvp7002_driver);
+}
+
+/*
+ * tvp7002_exit - Remove driver via I2C interface
+ *
+ * Unregister the TVP7002 driver.
+ * Returns nothing.
+ */
+static void __exit tvp7002_exit(void)
+{
+ i2c_del_driver(&tvp7002_driver);
+}
+
+module_init(tvp7002_init);
+module_exit(tvp7002_exit);
diff --git a/drivers/media/video/tvp7002_reg.h b/drivers/media/video/tvp7002_reg.h
new file mode 100644
index 0000000..0e34ca9
--- /dev/null
+++ b/drivers/media/video/tvp7002_reg.h
@@ -0,0 +1,150 @@
+/* Texas Instruments Triple 8-/10-BIT 165-/110-MSPS Video and Graphics
+ * Digitizer with Horizontal PLL registers
+ *
+ * Copyright (C) 2009 Texas Instruments Inc
+ * Author: Santiago Nunez-Corrales <santiago.nunez@ridgerun.com>
+ *
+ * This code is partially based upon the TVP5150 driver
+ * written by Mauro Carvalho Chehab (mchehab@infradead.org),
+ * the TVP514x driver written by Vaibhav Hiremath <hvaibhav@ti.com>
+ * and the TVP7002 driver in the TI LSP 2.10.00.14
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/* Naming conventions
+ * ------------------
+ *
+ * FDBK: Feedback
+ * DIV: Divider
+ * CTL: Control
+ * SEL: Select
+ * IN: Input
+ * OUT: Output
+ * R: Red
+ * G: Green
+ * B: Blue
+ * OFF: Offset
+ * THRS: Threshold
+ * DGTL: Digital
+ * LVL: Level
+ * PWR: Power
+ * MVIS: Macrovision
+ * W: Width
+ * H: Height
+ * ALGN: Alignment
+ * CLK: Clocks
+ * TOL: Tolerance
+ * BWTH: Bandwidth
+ * COEF: Coefficient
+ * STAT: Status
+ * AUTO: Automatic
+ * FLD: Field
+ * L: Line
+ */
+
+#define TVP7002_CHIP_REV 0x00
+#define TVP7002_HPLL_FDBK_DIV_MSBS 0x01
+#define TVP7002_HPLL_FDBK_DIV_LSBS 0x02
+#define TVP7002_HPLL_CRTL 0x03
+#define TVP7002_HPLL_PHASE_SEL 0x04
+#define TVP7002_CLAMP_START 0x05
+#define TVP7002_CLAMP_W 0x06
+#define TVP7002_HSYNC_OUT_W 0x07
+#define TVP7002_B_FINE_GAIN 0x08
+#define TVP7002_G_FINE_GAIN 0x09
+#define TVP7002_R_FINE_GAIN 0x0a
+#define TVP7002_B_FINE_OFF_MSBS 0x0b
+#define TVP7002_G_FINE_OFF_MSBS 0x0c
+#define TVP7002_R_FINE_OFF_MSBS 0x0d
+#define TVP7002_SYNC_CTL_1 0x0e
+#define TVP7002_HPLL_AND_CLAMP_CTL 0x0f
+#define TVP7002_SYNC_ON_G_THRS 0x10
+#define TVP7002_SYNC_SEPARATOR_THRS 0x11
+#define TVP7002_HPLL_PRE_COAST 0x12
+#define TVP7002_HPLL_POST_COAST 0x13
+#define TVP7002_SYNC_DETECT_STAT 0x14
+#define TVP7002_OUT_FORMATTER 0x15
+#define TVP7002_MISC_CTL_1 0x16
+#define TVP7002_MISC_CTL_2 0x17
+#define TVP7002_MISC_CTL_3 0x18
+#define TVP7002_IN_MUX_SEL_1 0x19
+#define TVP7002_IN_MUX_SEL_2 0x1a
+#define TVP7002_B_AND_G_COARSE_GAIN 0x1b
+#define TVP7002_R_COARSE_GAIN 0x1c
+#define TVP7002_FINE_OFF_LSBS 0x1d
+#define TVP7002_B_COARSE_OFF 0x1e
+#define TVP7002_G_COARSE_OFF 0x1f
+#define TVP7002_R_COARSE_OFF 0x20
+#define TVP7002_HSOUT_OUT_START 0x21
+#define TVP7002_MISC_CTL_4 0x22
+#define TVP7002_B_DGTL_ALC_OUT_LSBS 0x23
+#define TVP7002_G_DGTL_ALC_OUT_LSBS 0x24
+#define TVP7002_R_DGTL_ALC_OUT_LSBS 0x25
+#define TVP7002_AUTO_LVL_CTL_ENABLE 0x26
+#define TVP7002_DGTL_ALC_OUT_MSBS 0x27
+#define TVP7002_AUTO_LVL_CTL_FILTER 0x28
+/* Reserved 0x29*/
+#define TVP7002_FINE_CLAMP_CTL 0x2a
+#define TVP7002_PWR_CTL 0x2b
+#define TVP7002_ADC_SETUP 0x2c
+#define TVP7002_COARSE_CLAMP_CTL 0x2d
+#define TVP7002_SOG_CLAMP 0x2e
+#define TVP7002_RGB_COARSE_CLAMP_CTL 0x2f
+#define TVP7002_SOG_COARSE_CLAMP_CTL 0x30
+#define TVP7002_ALC_PLACEMENT 0x31
+/* Reserved 0x32 */
+/* Reserved 0x33 */
+#define TVP7002_MVIS_STRIPPER_W 0x34
+#define TVP7002_VSYNC_ALGN 0x35
+#define TVP7002_SYNC_BYPASS 0x36
+#define TVP7002_L_FRAME_STAT_LSBS 0x37
+#define TVP7002_L_FRAME_STAT_MSBS 0x38
+#define TVP7002_CLK_L_STAT_LSBS 0x39
+#define TVP7002_CLK_L_STAT_MSBS 0x3a
+#define TVP7002_HSYNC_W 0x3b
+#define TVP7002_VSYNC_W 0x3c
+#define TVP7002_L_LENGTH_TOL 0x3d
+/* Reserved 0x3e */
+#define TVP7002_VIDEO_BWTH_CTL 0x3f
+#define TVP7002_AVID_START_PIXEL_LSBS 0x40
+#define TVP7002_AVID_START_PIXEL_MSBS 0x41
+#define TVP7002_AVID_STOP_PIXEL_LSBS 0x42
+#define TVP7002_AVID_STOP_PIXEL_MSBS 0x43
+#define TVP7002_VBLK_F_0_START_L_OFF 0x44
+#define TVP7002_VBLK_F_1_START_L_OFF 0x45
+#define TVP7002_VBLK_F_0_DURATION 0x46
+#define TVP7002_VBLK_F_1_DURATION 0x47
+#define TVP7002_FBIT_F_0_START_L_OFF 0x48
+#define TVP7002_FBIT_F_1_START_L_OFF 0x49
+#define TVP7002_YUV_Y_G_COEF_LSBS 0x4a
+#define TVP7002_YUV_Y_G_COEF_MSBS 0x4b
+#define TVP7002_YUV_Y_B_COEF_LSBS 0x4c
+#define TVP7002_YUV_Y_B_COEF_MSBS 0x4d
+#define TVP7002_YUV_Y_R_COEF_LSBS 0x4e
+#define TVP7002_YUV_Y_R_COEF_MSBS 0x4f
+#define TVP7002_YUV_U_G_COEF_LSBS 0x50
+#define TVP7002_YUV_U_G_COEF_MSBS 0x51
+#define TVP7002_YUV_U_B_COEF_LSBS 0x52
+#define TVP7002_YUV_U_B_COEF_MSBS 0x53
+#define TVP7002_YUV_U_R_COEF_LSBS 0x54
+#define TVP7002_YUV_U_R_COEF_MSBS 0x55
+#define TVP7002_YUV_V_G_COEF_LSBS 0x56
+#define TVP7002_YUV_V_G_COEF_MSBS 0x57
+#define TVP7002_YUV_V_B_COEF_LSBS 0x58
+#define TVP7002_YUV_V_B_COEF_MSBS 0x59
+#define TVP7002_YUV_V_R_COEF_LSBS 0x5a
+#define TVP7002_YUV_V_R_COEF_MSBS 0x5b
+
diff --git a/drivers/media/video/tw9910.c b/drivers/media/video/tw9910.c
index 5b801a6..76be733 100644
--- a/drivers/media/video/tw9910.c
+++ b/drivers/media/video/tw9910.c
@@ -233,10 +233,10 @@
};
struct tw9910_priv {
- struct v4l2_subdev subdev;
- struct tw9910_video_info *info;
- const struct tw9910_scale_ctrl *scale;
- u32 revision;
+ struct v4l2_subdev subdev;
+ struct tw9910_video_info *info;
+ const struct tw9910_scale_ctrl *scale;
+ u32 revision;
};
static const struct tw9910_scale_ctrl tw9910_ntsc_scales[] = {
diff --git a/drivers/media/video/usbvision/usbvision-video.c b/drivers/media/video/usbvision/usbvision-video.c
index 1054546..7c17ec6 100644
--- a/drivers/media/video/usbvision/usbvision-video.c
+++ b/drivers/media/video/usbvision/usbvision-video.c
@@ -1487,7 +1487,7 @@
usbvision->vbi = usbvision_vdev_init(usbvision,
&usbvision_vbi_template,
"USBVision VBI");
- if (usbvision->vdev == NULL) {
+ if (usbvision->vbi == NULL) {
goto err_exit;
}
if (video_register_device(usbvision->vbi,
diff --git a/drivers/media/video/uvc/uvc_ctrl.c b/drivers/media/video/uvc/uvc_ctrl.c
index ec8ef8c..3b2e780 100644
--- a/drivers/media/video/uvc/uvc_ctrl.c
+++ b/drivers/media/video/uvc/uvc_ctrl.c
@@ -23,9 +23,13 @@
#include "uvcvideo.h"
-#define UVC_CTRL_NDATA 2
#define UVC_CTRL_DATA_CURRENT 0
#define UVC_CTRL_DATA_BACKUP 1
+#define UVC_CTRL_DATA_MIN 2
+#define UVC_CTRL_DATA_MAX 3
+#define UVC_CTRL_DATA_RES 4
+#define UVC_CTRL_DATA_DEF 5
+#define UVC_CTRL_DATA_LAST 6
/* ------------------------------------------------------------------------
* Controls
@@ -755,6 +759,49 @@
return ctrl;
}
+static int uvc_ctrl_populate_cache(struct uvc_video_chain *chain,
+ struct uvc_control *ctrl)
+{
+ int ret;
+
+ if (ctrl->info->flags & UVC_CONTROL_GET_DEF) {
+ ret = uvc_query_ctrl(chain->dev, UVC_GET_DEF, ctrl->entity->id,
+ chain->dev->intfnum, ctrl->info->selector,
+ uvc_ctrl_data(ctrl, UVC_CTRL_DATA_DEF),
+ ctrl->info->size);
+ if (ret < 0)
+ return ret;
+ }
+
+ if (ctrl->info->flags & UVC_CONTROL_GET_MIN) {
+ ret = uvc_query_ctrl(chain->dev, UVC_GET_MIN, ctrl->entity->id,
+ chain->dev->intfnum, ctrl->info->selector,
+ uvc_ctrl_data(ctrl, UVC_CTRL_DATA_MIN),
+ ctrl->info->size);
+ if (ret < 0)
+ return ret;
+ }
+ if (ctrl->info->flags & UVC_CONTROL_GET_MAX) {
+ ret = uvc_query_ctrl(chain->dev, UVC_GET_MAX, ctrl->entity->id,
+ chain->dev->intfnum, ctrl->info->selector,
+ uvc_ctrl_data(ctrl, UVC_CTRL_DATA_MAX),
+ ctrl->info->size);
+ if (ret < 0)
+ return ret;
+ }
+ if (ctrl->info->flags & UVC_CONTROL_GET_RES) {
+ ret = uvc_query_ctrl(chain->dev, UVC_GET_RES, ctrl->entity->id,
+ chain->dev->intfnum, ctrl->info->selector,
+ uvc_ctrl_data(ctrl, UVC_CTRL_DATA_RES),
+ ctrl->info->size);
+ if (ret < 0)
+ return ret;
+ }
+
+ ctrl->cached = 1;
+ return 0;
+}
+
int uvc_query_v4l2_ctrl(struct uvc_video_chain *chain,
struct v4l2_queryctrl *v4l2_ctrl)
{
@@ -762,17 +809,12 @@
struct uvc_control_mapping *mapping;
struct uvc_menu_info *menu;
unsigned int i;
- __u8 *data;
int ret;
ctrl = uvc_find_control(chain, v4l2_ctrl->id, &mapping);
if (ctrl == NULL)
return -EINVAL;
- data = kmalloc(ctrl->info->size, GFP_KERNEL);
- if (data == NULL)
- return -ENOMEM;
-
memset(v4l2_ctrl, 0, sizeof *v4l2_ctrl);
v4l2_ctrl->id = mapping->id;
v4l2_ctrl->type = mapping->v4l2_type;
@@ -782,14 +824,15 @@
if (!(ctrl->info->flags & UVC_CONTROL_SET_CUR))
v4l2_ctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY;
- if (ctrl->info->flags & UVC_CONTROL_GET_DEF) {
- ret = uvc_query_ctrl(chain->dev, UVC_GET_DEF, ctrl->entity->id,
- chain->dev->intfnum, ctrl->info->selector,
- data, ctrl->info->size);
+ if (!ctrl->cached) {
+ ret = uvc_ctrl_populate_cache(chain, ctrl);
if (ret < 0)
- goto out;
- v4l2_ctrl->default_value =
- mapping->get(mapping, UVC_GET_DEF, data);
+ return ret;
+ }
+
+ if (ctrl->info->flags & UVC_CONTROL_GET_DEF) {
+ v4l2_ctrl->default_value = mapping->get(mapping, UVC_GET_DEF,
+ uvc_ctrl_data(ctrl, UVC_CTRL_DATA_DEF));
}
switch (mapping->v4l2_type) {
@@ -806,56 +849,37 @@
}
}
- ret = 0;
- goto out;
+ return 0;
case V4L2_CTRL_TYPE_BOOLEAN:
v4l2_ctrl->minimum = 0;
v4l2_ctrl->maximum = 1;
v4l2_ctrl->step = 1;
- ret = 0;
- goto out;
+ return 0;
case V4L2_CTRL_TYPE_BUTTON:
v4l2_ctrl->minimum = 0;
v4l2_ctrl->maximum = 0;
v4l2_ctrl->step = 0;
- ret = 0;
- goto out;
+ return 0;
default:
break;
}
- if (ctrl->info->flags & UVC_CONTROL_GET_MIN) {
- ret = uvc_query_ctrl(chain->dev, UVC_GET_MIN, ctrl->entity->id,
- chain->dev->intfnum, ctrl->info->selector,
- data, ctrl->info->size);
- if (ret < 0)
- goto out;
- v4l2_ctrl->minimum = mapping->get(mapping, UVC_GET_MIN, data);
- }
- if (ctrl->info->flags & UVC_CONTROL_GET_MAX) {
- ret = uvc_query_ctrl(chain->dev, UVC_GET_MAX, ctrl->entity->id,
- chain->dev->intfnum, ctrl->info->selector,
- data, ctrl->info->size);
- if (ret < 0)
- goto out;
- v4l2_ctrl->maximum = mapping->get(mapping, UVC_GET_MAX, data);
- }
- if (ctrl->info->flags & UVC_CONTROL_GET_RES) {
- ret = uvc_query_ctrl(chain->dev, UVC_GET_RES, ctrl->entity->id,
- chain->dev->intfnum, ctrl->info->selector,
- data, ctrl->info->size);
- if (ret < 0)
- goto out;
- v4l2_ctrl->step = mapping->get(mapping, UVC_GET_RES, data);
- }
+ if (ctrl->info->flags & UVC_CONTROL_GET_MIN)
+ v4l2_ctrl->minimum = mapping->get(mapping, UVC_GET_MIN,
+ uvc_ctrl_data(ctrl, UVC_CTRL_DATA_MIN));
- ret = 0;
-out:
- kfree(data);
- return ret;
+ if (ctrl->info->flags & UVC_CONTROL_GET_MAX)
+ v4l2_ctrl->maximum = mapping->get(mapping, UVC_GET_MAX,
+ uvc_ctrl_data(ctrl, UVC_CTRL_DATA_MAX));
+
+ if (ctrl->info->flags & UVC_CONTROL_GET_RES)
+ v4l2_ctrl->step = mapping->get(mapping, UVC_GET_RES,
+ uvc_ctrl_data(ctrl, UVC_CTRL_DATA_RES));
+
+ return 0;
}
@@ -997,19 +1021,57 @@
{
struct uvc_control *ctrl;
struct uvc_control_mapping *mapping;
- s32 value = xctrl->value;
+ s32 value;
+ u32 step;
+ s32 min;
+ s32 max;
int ret;
ctrl = uvc_find_control(chain, xctrl->id, &mapping);
if (ctrl == NULL || (ctrl->info->flags & UVC_CONTROL_SET_CUR) == 0)
return -EINVAL;
- if (mapping->v4l2_type == V4L2_CTRL_TYPE_MENU) {
- if (value < 0 || value >= mapping->menu_count)
- return -EINVAL;
- value = mapping->menu_info[value].value;
+ /* Clamp out of range values. */
+ switch (mapping->v4l2_type) {
+ case V4L2_CTRL_TYPE_INTEGER:
+ if (!ctrl->cached) {
+ ret = uvc_ctrl_populate_cache(chain, ctrl);
+ if (ret < 0)
+ return ret;
+ }
+
+ min = mapping->get(mapping, UVC_GET_MIN,
+ uvc_ctrl_data(ctrl, UVC_CTRL_DATA_MIN));
+ max = mapping->get(mapping, UVC_GET_MAX,
+ uvc_ctrl_data(ctrl, UVC_CTRL_DATA_MAX));
+ step = mapping->get(mapping, UVC_GET_RES,
+ uvc_ctrl_data(ctrl, UVC_CTRL_DATA_RES));
+
+ xctrl->value = min + (xctrl->value - min + step/2) / step * step;
+ xctrl->value = clamp(xctrl->value, min, max);
+ value = xctrl->value;
+ break;
+
+ case V4L2_CTRL_TYPE_BOOLEAN:
+ xctrl->value = clamp(xctrl->value, 0, 1);
+ value = xctrl->value;
+ break;
+
+ case V4L2_CTRL_TYPE_MENU:
+ if (xctrl->value < 0 || xctrl->value >= mapping->menu_count)
+ return -ERANGE;
+ value = mapping->menu_info[xctrl->value].value;
+ break;
+
+ default:
+ value = xctrl->value;
+ break;
}
+ /* If the mapping doesn't span the whole UVC control, the current value
+ * needs to be loaded from the device to perform the read-modify-write
+ * operation.
+ */
if (!ctrl->loaded && (ctrl->info->size * 8) != mapping->size) {
if ((ctrl->info->flags & UVC_CONTROL_GET_CUR) == 0) {
memset(uvc_ctrl_data(ctrl, UVC_CTRL_DATA_CURRENT),
@@ -1027,6 +1089,7 @@
ctrl->loaded = 1;
}
+ /* Backup the current value in case we need to rollback later. */
if (!ctrl->dirty) {
memcpy(uvc_ctrl_data(ctrl, UVC_CTRL_DATA_BACKUP),
uvc_ctrl_data(ctrl, UVC_CTRL_DATA_CURRENT),
@@ -1080,10 +1143,8 @@
}
if (!found) {
- uvc_trace(UVC_TRACE_CONTROL,
- "Control " UVC_GUID_FORMAT "/%u not found.\n",
- UVC_GUID_ARGS(entity->extension.guidExtensionCode),
- xctrl->selector);
+ uvc_trace(UVC_TRACE_CONTROL, "Control %pUl/%u not found.\n",
+ entity->extension.guidExtensionCode, xctrl->selector);
return -EINVAL;
}
@@ -1159,9 +1220,9 @@
(ctrl->info->flags & UVC_CONTROL_RESTORE) == 0)
continue;
- printk(KERN_INFO "restoring control " UVC_GUID_FORMAT
- "/%u/%u\n", UVC_GUID_ARGS(ctrl->info->entity),
- ctrl->info->index, ctrl->info->selector);
+ printk(KERN_INFO "restoring control %pUl/%u/%u\n",
+ ctrl->info->entity, ctrl->info->index,
+ ctrl->info->selector);
ctrl->dirty = 1;
}
@@ -1215,47 +1276,43 @@
ret = uvc_query_ctrl(dev, UVC_GET_LEN, ctrl->entity->id,
dev->intfnum, info->selector, (__u8 *)&size, 2);
if (ret < 0) {
- uvc_trace(UVC_TRACE_CONTROL, "GET_LEN failed on "
- "control " UVC_GUID_FORMAT "/%u (%d).\n",
- UVC_GUID_ARGS(info->entity), info->selector,
- ret);
+ uvc_trace(UVC_TRACE_CONTROL,
+ "GET_LEN failed on control %pUl/%u (%d).\n",
+ info->entity, info->selector, ret);
return;
}
if (info->size != le16_to_cpu(size)) {
- uvc_trace(UVC_TRACE_CONTROL, "Control " UVC_GUID_FORMAT
- "/%u size doesn't match user supplied "
- "value.\n", UVC_GUID_ARGS(info->entity),
- info->selector);
+ uvc_trace(UVC_TRACE_CONTROL, "Control %pUl/%u size "
+ "doesn't match user supplied value.\n",
+ info->entity, info->selector);
return;
}
ret = uvc_query_ctrl(dev, UVC_GET_INFO, ctrl->entity->id,
dev->intfnum, info->selector, &inf, 1);
if (ret < 0) {
- uvc_trace(UVC_TRACE_CONTROL, "GET_INFO failed on "
- "control " UVC_GUID_FORMAT "/%u (%d).\n",
- UVC_GUID_ARGS(info->entity), info->selector,
- ret);
+ uvc_trace(UVC_TRACE_CONTROL,
+ "GET_INFO failed on control %pUl/%u (%d).\n",
+ info->entity, info->selector, ret);
return;
}
flags = info->flags;
if (((flags & UVC_CONTROL_GET_CUR) && !(inf & (1 << 0))) ||
((flags & UVC_CONTROL_SET_CUR) && !(inf & (1 << 1)))) {
- uvc_trace(UVC_TRACE_CONTROL, "Control "
- UVC_GUID_FORMAT "/%u flags don't match "
- "supported operations.\n",
- UVC_GUID_ARGS(info->entity), info->selector);
+ uvc_trace(UVC_TRACE_CONTROL, "Control %pUl/%u flags "
+ "don't match supported operations.\n",
+ info->entity, info->selector);
return;
}
}
ctrl->info = info;
- ctrl->data = kmalloc(ctrl->info->size * UVC_CTRL_NDATA, GFP_KERNEL);
- uvc_trace(UVC_TRACE_CONTROL, "Added control " UVC_GUID_FORMAT "/%u "
- "to device %s entity %u\n", UVC_GUID_ARGS(ctrl->info->entity),
- ctrl->info->selector, dev->udev->devpath, entity->id);
+ ctrl->data = kmalloc(ctrl->info->size * UVC_CTRL_DATA_LAST, GFP_KERNEL);
+ uvc_trace(UVC_TRACE_CONTROL, "Added control %pUl/%u to device %s "
+ "entity %u\n", ctrl->info->entity, ctrl->info->selector,
+ dev->udev->devpath, entity->id);
}
/*
@@ -1281,17 +1338,16 @@
continue;
if (ctrl->selector == info->selector) {
- uvc_trace(UVC_TRACE_CONTROL, "Control "
- UVC_GUID_FORMAT "/%u is already defined.\n",
- UVC_GUID_ARGS(info->entity), info->selector);
+ uvc_trace(UVC_TRACE_CONTROL,
+ "Control %pUl/%u is already defined.\n",
+ info->entity, info->selector);
ret = -EEXIST;
goto end;
}
if (ctrl->index == info->index) {
- uvc_trace(UVC_TRACE_CONTROL, "Control "
- UVC_GUID_FORMAT "/%u would overwrite index "
- "%d.\n", UVC_GUID_ARGS(info->entity),
- info->selector, info->index);
+ uvc_trace(UVC_TRACE_CONTROL,
+ "Control %pUl/%u would overwrite index %d.\n",
+ info->entity, info->selector, info->index);
ret = -EEXIST;
goto end;
}
@@ -1332,10 +1388,9 @@
continue;
if (info->size * 8 < mapping->size + mapping->offset) {
- uvc_trace(UVC_TRACE_CONTROL, "Mapping '%s' would "
- "overflow control " UVC_GUID_FORMAT "/%u\n",
- mapping->name, UVC_GUID_ARGS(info->entity),
- info->selector);
+ uvc_trace(UVC_TRACE_CONTROL,
+ "Mapping '%s' would overflow control %pUl/%u\n",
+ mapping->name, info->entity, info->selector);
ret = -EOVERFLOW;
goto end;
}
@@ -1354,9 +1409,9 @@
mapping->ctrl = info;
list_add_tail(&mapping->list, &info->mappings);
- uvc_trace(UVC_TRACE_CONTROL, "Adding mapping %s to control "
- UVC_GUID_FORMAT "/%u.\n", mapping->name,
- UVC_GUID_ARGS(info->entity), info->selector);
+ uvc_trace(UVC_TRACE_CONTROL,
+ "Adding mapping %s to control %pUl/%u.\n",
+ mapping->name, info->entity, info->selector);
ret = 0;
break;
@@ -1378,6 +1433,7 @@
struct usb_device_id id;
u8 index;
} blacklist[] = {
+ { { USB_DEVICE(0x13d3, 0x509b) }, 9 }, /* Gain */
{ { USB_DEVICE(0x1c4f, 0x3000) }, 6 }, /* WB Temperature */
{ { USB_DEVICE(0x5986, 0x0241) }, 2 }, /* Hue */
};
diff --git a/drivers/media/video/uvc/uvc_driver.c b/drivers/media/video/uvc/uvc_driver.c
index 391cccc..a814820 100644
--- a/drivers/media/video/uvc/uvc_driver.c
+++ b/drivers/media/video/uvc/uvc_driver.c
@@ -43,8 +43,9 @@
#define DRIVER_VERSION "v0.1.0"
#endif
+unsigned int uvc_clock_param = CLOCK_MONOTONIC;
unsigned int uvc_no_drop_param;
-static unsigned int uvc_quirks_param;
+static unsigned int uvc_quirks_param = -1;
unsigned int uvc_trace_param;
unsigned int uvc_timeout_param = UVC_CTRL_STREAMING_TIMEOUT;
@@ -59,6 +60,11 @@
.fcc = V4L2_PIX_FMT_YUYV,
},
{
+ .name = "YUV 4:2:2 (YUYV)",
+ .guid = UVC_GUID_FORMAT_YUY2_ISIGHT,
+ .fcc = V4L2_PIX_FMT_YUYV,
+ },
+ {
.name = "YUV 4:2:0 (NV12)",
.guid = UVC_GUID_FORMAT_NV12,
.fcc = V4L2_PIX_FMT_NV12,
@@ -309,11 +315,10 @@
sizeof format->name);
format->fcc = fmtdesc->fcc;
} else {
- uvc_printk(KERN_INFO, "Unknown video format "
- UVC_GUID_FORMAT "\n",
- UVC_GUID_ARGS(&buffer[5]));
- snprintf(format->name, sizeof format->name,
- UVC_GUID_FORMAT, UVC_GUID_ARGS(&buffer[5]));
+ uvc_printk(KERN_INFO, "Unknown video format %pUl\n",
+ &buffer[5]);
+ snprintf(format->name, sizeof(format->name), "%pUl\n",
+ &buffer[5]);
format->fcc = 0;
}
@@ -1750,7 +1755,8 @@
dev->udev = usb_get_dev(udev);
dev->intf = usb_get_intf(intf);
dev->intfnum = intf->cur_altsetting->desc.bInterfaceNumber;
- dev->quirks = id->driver_info | uvc_quirks_param;
+ dev->quirks = (uvc_quirks_param == -1)
+ ? id->driver_info : uvc_quirks_param;
if (udev->product != NULL)
strlcpy(dev->name, udev->product, sizeof dev->name);
@@ -1773,9 +1779,9 @@
le16_to_cpu(udev->descriptor.idVendor),
le16_to_cpu(udev->descriptor.idProduct));
- if (uvc_quirks_param != 0) {
- uvc_printk(KERN_INFO, "Forcing device quirks 0x%x by module "
- "parameter for testing purpose.\n", uvc_quirks_param);
+ if (dev->quirks != id->driver_info) {
+ uvc_printk(KERN_INFO, "Forcing device quirks to 0x%x by module "
+ "parameter for testing purpose.\n", dev->quirks);
uvc_printk(KERN_INFO, "Please report required quirks to the "
"linux-uvc-devel mailing list.\n");
}
@@ -1892,6 +1898,45 @@
}
/* ------------------------------------------------------------------------
+ * Module parameters
+ */
+
+static int uvc_clock_param_get(char *buffer, struct kernel_param *kp)
+{
+ if (uvc_clock_param == CLOCK_MONOTONIC)
+ return sprintf(buffer, "CLOCK_MONOTONIC");
+ else
+ return sprintf(buffer, "CLOCK_REALTIME");
+}
+
+static int uvc_clock_param_set(const char *val, struct kernel_param *kp)
+{
+ if (strncasecmp(val, "clock_", strlen("clock_")) == 0)
+ val += strlen("clock_");
+
+ if (strcasecmp(val, "monotonic") == 0)
+ uvc_clock_param = CLOCK_MONOTONIC;
+ else if (strcasecmp(val, "realtime") == 0)
+ uvc_clock_param = CLOCK_REALTIME;
+ else
+ return -EINVAL;
+
+ return 0;
+}
+
+module_param_call(clock, uvc_clock_param_set, uvc_clock_param_get,
+ &uvc_clock_param, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(clock, "Video buffers timestamp clock");
+module_param_named(nodrop, uvc_no_drop_param, uint, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(nodrop, "Don't drop incomplete frames");
+module_param_named(quirks, uvc_quirks_param, uint, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(quirks, "Forced device quirks");
+module_param_named(trace, uvc_trace_param, uint, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(trace, "Trace level bitmask");
+module_param_named(timeout, uvc_timeout_param, uint, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(timeout, "Streaming control requests timeout");
+
+/* ------------------------------------------------------------------------
* Driver initialization and cleanup
*/
@@ -2197,15 +2242,6 @@
module_init(uvc_init);
module_exit(uvc_cleanup);
-module_param_named(nodrop, uvc_no_drop_param, uint, S_IRUGO|S_IWUSR);
-MODULE_PARM_DESC(nodrop, "Don't drop incomplete frames");
-module_param_named(quirks, uvc_quirks_param, uint, S_IRUGO|S_IWUSR);
-MODULE_PARM_DESC(quirks, "Forced device quirks");
-module_param_named(trace, uvc_trace_param, uint, S_IRUGO|S_IWUSR);
-MODULE_PARM_DESC(trace, "Trace level bitmask");
-module_param_named(timeout, uvc_timeout_param, uint, S_IRUGO|S_IWUSR);
-MODULE_PARM_DESC(timeout, "Streaming control requests timeout");
-
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
diff --git a/drivers/media/video/uvc/uvc_queue.c b/drivers/media/video/uvc/uvc_queue.c
index ea11839..4a925a3 100644
--- a/drivers/media/video/uvc/uvc_queue.c
+++ b/drivers/media/video/uvc/uvc_queue.c
@@ -502,7 +502,6 @@
spin_unlock_irqrestore(&queue->irqlock, flags);
buf->buf.sequence = queue->sequence++;
- do_gettimeofday(&buf->buf.timestamp);
wake_up(&buf->wait);
return nextbuf;
diff --git a/drivers/media/video/uvc/uvc_v4l2.c b/drivers/media/video/uvc/uvc_v4l2.c
index 23239a4..43152aa 100644
--- a/drivers/media/video/uvc/uvc_v4l2.c
+++ b/drivers/media/video/uvc/uvc_v4l2.c
@@ -539,7 +539,7 @@
xctrl.id = ctrl->id;
xctrl.value = ctrl->value;
- uvc_ctrl_begin(chain);
+ ret = uvc_ctrl_begin(chain);
if (ret < 0)
return ret;
@@ -549,6 +549,8 @@
return ret;
}
ret = uvc_ctrl_commit(chain);
+ if (ret == 0)
+ ctrl->value = xctrl.value;
break;
}
diff --git a/drivers/media/video/uvc/uvc_video.c b/drivers/media/video/uvc/uvc_video.c
index 7dcf534..6b0666b 100644
--- a/drivers/media/video/uvc/uvc_video.c
+++ b/drivers/media/video/uvc/uvc_video.c
@@ -410,6 +410,8 @@
* when the EOF bit is set to force synchronisation on the next packet.
*/
if (buf->state != UVC_BUF_STATE_ACTIVE) {
+ struct timespec ts;
+
if (fid == stream->last_fid) {
uvc_trace(UVC_TRACE_FRAME, "Dropping payload (out of "
"sync).\n");
@@ -419,6 +421,14 @@
return -ENODATA;
}
+ if (uvc_clock_param == CLOCK_MONOTONIC)
+ ktime_get_ts(&ts);
+ else
+ ktime_get_real_ts(&ts);
+
+ buf->buf.timestamp.tv_sec = ts.tv_sec;
+ buf->buf.timestamp.tv_usec = ts.tv_nsec / NSEC_PER_USEC;
+
/* TODO: Handle PTS and SCR. */
buf->state = UVC_BUF_STATE_ACTIVE;
}
diff --git a/drivers/media/video/uvc/uvcvideo.h b/drivers/media/video/uvc/uvcvideo.h
index 2337585..2bba059 100644
--- a/drivers/media/video/uvc/uvcvideo.h
+++ b/drivers/media/video/uvc/uvcvideo.h
@@ -113,6 +113,9 @@
#define UVC_GUID_FORMAT_YUY2 \
{ 'Y', 'U', 'Y', '2', 0x00, 0x00, 0x10, 0x00, \
0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
+#define UVC_GUID_FORMAT_YUY2_ISIGHT \
+ { 'Y', 'U', 'Y', '2', 0x00, 0x00, 0x10, 0x00, \
+ 0x80, 0x00, 0x00, 0x00, 0x00, 0x38, 0x9b, 0x71}
#define UVC_GUID_FORMAT_NV12 \
{ 'N', 'V', '1', '2', 0x00, 0x00, 0x10, 0x00, \
0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
@@ -149,7 +152,7 @@
#define UVC_MAX_STATUS_SIZE 16
#define UVC_CTRL_CONTROL_TIMEOUT 300
-#define UVC_CTRL_STREAMING_TIMEOUT 3000
+#define UVC_CTRL_STREAMING_TIMEOUT 5000
/* Devices quirks */
#define UVC_QUIRK_STATUS_INTERVAL 0x00000001
@@ -242,7 +245,8 @@
uvc_control_info. */
__u8 dirty : 1,
loaded : 1,
- modified : 1;
+ modified : 1,
+ cached : 1;
__u8 *data;
};
@@ -533,6 +537,7 @@
#define UVC_WARN_MINMAX 0
#define UVC_WARN_PROBE_DEF 1
+extern unsigned int uvc_clock_param;
extern unsigned int uvc_no_drop_param;
extern unsigned int uvc_trace_param;
extern unsigned int uvc_timeout_param;
@@ -552,16 +557,6 @@
#define uvc_printk(level, msg...) \
printk(level "uvcvideo: " msg)
-#define UVC_GUID_FORMAT "%02x%02x%02x%02x-%02x%02x-%02x%02x-%02x%02x-" \
- "%02x%02x%02x%02x%02x%02x"
-#define UVC_GUID_ARGS(guid) \
- (guid)[3], (guid)[2], (guid)[1], (guid)[0], \
- (guid)[5], (guid)[4], \
- (guid)[7], (guid)[6], \
- (guid)[8], (guid)[9], \
- (guid)[10], (guid)[11], (guid)[12], \
- (guid)[13], (guid)[14], (guid)[15]
-
/* --------------------------------------------------------------------------
* Internal functions.
*/
diff --git a/drivers/media/video/v4l2-compat-ioctl32.c b/drivers/media/video/v4l2-compat-ioctl32.c
index c4150bd..f77f84b 100644
--- a/drivers/media/video/v4l2-compat-ioctl32.c
+++ b/drivers/media/video/v4l2-compat-ioctl32.c
@@ -288,7 +288,7 @@
static int put_v4l2_window32(struct v4l2_window *kp, struct v4l2_window32 __user *up)
{
- if (copy_to_user(&up->w, &kp->w, sizeof(up->w)) ||
+ if (copy_to_user(&up->w, &kp->w, sizeof(kp->w)) ||
put_user(kp->field, &up->field) ||
put_user(kp->chromakey, &up->chromakey) ||
put_user(kp->clipcount, &up->clipcount))
@@ -475,6 +475,9 @@
return -EFAULT;
switch (kp->memory) {
case V4L2_MEMORY_MMAP:
+ if (get_user(kp->length, &up->length) ||
+ get_user(kp->m.offset, &up->m.offset))
+ return -EFAULT;
break;
case V4L2_MEMORY_USERPTR:
{
diff --git a/drivers/media/video/videobuf-dma-sg.c b/drivers/media/video/videobuf-dma-sg.c
index fa78555..fcd045e 100644
--- a/drivers/media/video/videobuf-dma-sg.c
+++ b/drivers/media/video/videobuf-dma-sg.c
@@ -418,6 +418,8 @@
struct videobuf_buffer *vb;
vb = kzalloc(size+sizeof(*mem),GFP_KERNEL);
+ if (!vb)
+ return vb;
mem = vb->priv = ((char *)vb)+size;
mem->magic=MAGIC_SG_MEM;
diff --git a/drivers/media/video/videobuf-vmalloc.c b/drivers/media/video/videobuf-vmalloc.c
index d6e6a28..136e093 100644
--- a/drivers/media/video/videobuf-vmalloc.c
+++ b/drivers/media/video/videobuf-vmalloc.c
@@ -138,6 +138,8 @@
struct videobuf_buffer *vb;
vb = kzalloc(size+sizeof(*mem),GFP_KERNEL);
+ if (!vb)
+ return vb;
mem = vb->priv = ((char *)vb)+size;
mem->magic=MAGIC_VMAL_MEM;
diff --git a/drivers/media/video/vivi.c b/drivers/media/video/vivi.c
index 37632a0..cdbe703 100644
--- a/drivers/media/video/vivi.c
+++ b/drivers/media/video/vivi.c
@@ -1371,7 +1371,7 @@
/* Now that everything is fine, let's add it to device list */
list_add_tail(&dev->vivi_devlist, &vivi_devlist);
- if (video_nr >= 0)
+ if (video_nr != -1)
video_nr++;
dev->vfd = vfd;
diff --git a/drivers/media/video/zc0301/Kconfig b/drivers/media/video/zc0301/Kconfig
index edb0029..a7e610e 100644
--- a/drivers/media/video/zc0301/Kconfig
+++ b/drivers/media/video/zc0301/Kconfig
@@ -1,7 +1,11 @@
config USB_ZC0301
- tristate "USB ZC0301[P] Image Processor and Control Chip support"
+ tristate "USB ZC0301[P] webcam support (DEPRECATED)"
depends on VIDEO_V4L2
+ default n
---help---
+ This driver is DEPRECATED please use the gspca zc3xx module
+ instead.
+
Say Y here if you want support for cameras based on the ZC0301 or
ZC0301P Image Processors and Control Chips.
diff --git a/drivers/media/video/zoran/zoran_device.c b/drivers/media/video/zoran/zoran_device.c
index f6c2fb4..e6ad4b2 100644
--- a/drivers/media/video/zoran/zoran_device.c
+++ b/drivers/media/video/zoran/zoran_device.c
@@ -1196,7 +1196,8 @@
static void zoran_restart(struct zoran *zr)
{
/* Now the stat_comm buffer is ready for restart */
- int status = 0, mode;
+ unsigned int status = 0;
+ int mode;
if (zr->codec_mode == BUZ_MODE_MOTION_COMPRESS) {
decoder_call(zr, video, g_input_status, &status);
@@ -1228,7 +1229,7 @@
u32 astat,
u32 stat)
{
- int i, j;
+ int i;
/* This is JPEG error handling part */
if (zr->codec_mode != BUZ_MODE_MOTION_COMPRESS &&
@@ -1279,6 +1280,7 @@
/* Report error */
if (zr36067_debug > 1 && zr->num_errors <= 8) {
long frame;
+ int j;
frame = zr->jpg_pend[zr->jpg_dma_tail & BUZ_MASK_FRAME];
printk(KERN_ERR
diff --git a/drivers/media/video/zoran/zoran_driver.c b/drivers/media/video/zoran/zoran_driver.c
index 2ddffed..ec41303 100644
--- a/drivers/media/video/zoran/zoran_driver.c
+++ b/drivers/media/video/zoran/zoran_driver.c
@@ -324,7 +324,7 @@
/* Allocate fragment table for this buffer */
mem = (void *)get_zeroed_page(GFP_KERNEL);
- if (mem == 0) {
+ if (!mem) {
dprintk(1,
KERN_ERR
"%s: %s - get_zeroed_page (frag_tab) failed for buffer %d\n",
@@ -1444,7 +1444,7 @@
}
if (norm == V4L2_STD_ALL) {
- int status = 0;
+ unsigned int status = 0;
v4l2_std_id std = 0;
decoder_call(zr, video, querystd, &std);
diff --git a/drivers/media/video/zr364xx.c b/drivers/media/video/zr364xx.c
index f0eae83..3d4bac2 100644
--- a/drivers/media/video/zr364xx.c
+++ b/drivers/media/video/zr364xx.c
@@ -78,6 +78,7 @@
#define METHOD0 0
#define METHOD1 1
#define METHOD2 2
+#define METHOD3 3
/* Module parameters */
@@ -114,7 +115,7 @@
{USB_DEVICE(0x06d6, 0x003b), .driver_info = METHOD0 },
{USB_DEVICE(0x0a17, 0x004e), .driver_info = METHOD2 },
{USB_DEVICE(0x041e, 0x405d), .driver_info = METHOD2 },
- {USB_DEVICE(0x08ca, 0x2102), .driver_info = METHOD2 },
+ {USB_DEVICE(0x08ca, 0x2102), .driver_info = METHOD3 },
{USB_DEVICE(0x06d6, 0x003d), .driver_info = METHOD0 },
{} /* Terminating entry */
};
@@ -302,7 +303,7 @@
};
/* init table */
-static message *init[3] = { m0, m1, m2 };
+static message *init[4] = { m0, m1, m2, m2 };
/* JPEG static data in header (Huffman table, etc) */
@@ -967,6 +968,22 @@
m0d1[0] = mode;
m1[2].value = 0xf000 + mode;
m2[1].value = 0xf000 + mode;
+
+ /* special case for METHOD3, the modes are different */
+ if (cam->method == METHOD3) {
+ switch (mode) {
+ case 1:
+ m2[1].value = 0xf000 + 4;
+ break;
+ case 2:
+ m2[1].value = 0xf000 + 0;
+ break;
+ default:
+ m2[1].value = 0xf000 + 1;
+ break;
+ }
+ }
+
header2[437] = cam->height / 256;
header2[438] = cam->height % 256;
header2[439] = cam->width / 256;
@@ -1582,6 +1599,22 @@
m0d1[0] = mode;
m1[2].value = 0xf000 + mode;
m2[1].value = 0xf000 + mode;
+
+ /* special case for METHOD3, the modes are different */
+ if (cam->method == METHOD3) {
+ switch (mode) {
+ case 1:
+ m2[1].value = 0xf000 + 4;
+ break;
+ case 2:
+ m2[1].value = 0xf000 + 0;
+ break;
+ default:
+ m2[1].value = 0xf000 + 1;
+ break;
+ }
+ }
+
header2[437] = cam->height / 256;
header2[438] = cam->height % 256;
header2[439] = cam->width / 256;
diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
index 44d2037..5382b5a 100644
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@@ -126,8 +126,6 @@
* Public data...
*/
-static struct proc_dir_entry *mpt_proc_root_dir;
-
#define WHOINIT_UNKNOWN 0xAA
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
@@ -146,6 +144,9 @@
static MPT_RESETHANDLER MptResetHandlers[MPT_MAX_PROTOCOL_DRIVERS];
static struct mpt_pci_driver *MptDeviceDriverHandlers[MPT_MAX_PROTOCOL_DRIVERS];
+#ifdef CONFIG_PROC_FS
+static struct proc_dir_entry *mpt_proc_root_dir;
+#endif
/*
* Driver Callback Index's
diff --git a/drivers/message/fusion/mptbase.h b/drivers/message/fusion/mptbase.h
index b494867..9718c8f 100644
--- a/drivers/message/fusion/mptbase.h
+++ b/drivers/message/fusion/mptbase.h
@@ -76,8 +76,8 @@
#define COPYRIGHT "Copyright (c) 1999-2008 " MODULEAUTHOR
#endif
-#define MPT_LINUX_VERSION_COMMON "3.04.13"
-#define MPT_LINUX_PACKAGE_NAME "@(#)mptlinux-3.04.13"
+#define MPT_LINUX_VERSION_COMMON "3.04.14"
+#define MPT_LINUX_PACKAGE_NAME "@(#)mptlinux-3.04.14"
#define WHAT_MAGIC_STRING "@" "(" "#" ")"
#define show_mptmod_ver(s,ver) \
diff --git a/drivers/message/fusion/mptctl.c b/drivers/message/fusion/mptctl.c
index 352acd0..caa8f56 100644
--- a/drivers/message/fusion/mptctl.c
+++ b/drivers/message/fusion/mptctl.c
@@ -360,8 +360,8 @@
u16 iocstatus;
/* bus reset is only good for SCSI IO, RAID PASSTHRU */
- if (!(function == MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH) ||
- (function == MPI_FUNCTION_SCSI_IO_REQUEST)) {
+ if (!(function == MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH ||
+ function == MPI_FUNCTION_SCSI_IO_REQUEST)) {
dtmprintk(ioc, printk(MYIOC_s_WARN_FMT
"TaskMgmt, not SCSI_IO!!\n", ioc->name));
return -EPERM;
diff --git a/drivers/message/fusion/mptfc.c b/drivers/message/fusion/mptfc.c
index ebf6ae0..612ab3c 100644
--- a/drivers/message/fusion/mptfc.c
+++ b/drivers/message/fusion/mptfc.c
@@ -195,29 +195,34 @@
unsigned long flags;
int ready;
MPT_ADAPTER *ioc;
+ int loops = 40; /* seconds */
hd = shost_priv(SCpnt->device->host);
ioc = hd->ioc;
spin_lock_irqsave(shost->host_lock, flags);
- while ((ready = fc_remote_port_chkready(rport) >> 16) == DID_IMM_RETRY) {
+ while ((ready = fc_remote_port_chkready(rport) >> 16) == DID_IMM_RETRY
+ || (loops > 0 && ioc->active == 0)) {
spin_unlock_irqrestore(shost->host_lock, flags);
dfcprintk (ioc, printk(MYIOC_s_DEBUG_FMT
"mptfc_block_error_handler.%d: %d:%d, port status is "
- "DID_IMM_RETRY, deferring %s recovery.\n",
+ "%x, active flag %d, deferring %s recovery.\n",
ioc->name, ioc->sh->host_no,
- SCpnt->device->id, SCpnt->device->lun, caller));
+ SCpnt->device->id, SCpnt->device->lun,
+ ready, ioc->active, caller));
msleep(1000);
spin_lock_irqsave(shost->host_lock, flags);
+ loops --;
}
spin_unlock_irqrestore(shost->host_lock, flags);
- if (ready == DID_NO_CONNECT || !SCpnt->device->hostdata) {
+ if (ready == DID_NO_CONNECT || !SCpnt->device->hostdata
+ || ioc->active == 0) {
dfcprintk (ioc, printk(MYIOC_s_DEBUG_FMT
"%s.%d: %d:%d, failing recovery, "
- "port state %d, vdevice %p.\n", caller,
+ "port state %x, active %d, vdevice %p.\n", caller,
ioc->name, ioc->sh->host_no,
SCpnt->device->id, SCpnt->device->lun, ready,
- SCpnt->device->hostdata));
+ ioc->active, SCpnt->device->hostdata));
return FAILED;
}
dfcprintk (ioc, printk(MYIOC_s_DEBUG_FMT
diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c
index 83873e3..c20bbe4 100644
--- a/drivers/message/fusion/mptsas.c
+++ b/drivers/message/fusion/mptsas.c
@@ -1075,6 +1075,19 @@
return 0;
}
+static void
+mptsas_block_io_sdev(struct scsi_device *sdev, void *data)
+{
+ scsi_device_set_state(sdev, SDEV_BLOCK);
+}
+
+static void
+mptsas_block_io_starget(struct scsi_target *starget)
+{
+ if (starget)
+ starget_for_each_device(starget, NULL, mptsas_block_io_sdev);
+}
+
/**
* mptsas_target_reset_queue
*
@@ -1098,10 +1111,11 @@
id = sas_event_data->TargetID;
channel = sas_event_data->Bus;
- if (!(vtarget = mptsas_find_vtarget(ioc, channel, id)))
- return;
-
- vtarget->deleted = 1; /* block IO */
+ vtarget = mptsas_find_vtarget(ioc, channel, id);
+ if (vtarget) {
+ mptsas_block_io_starget(vtarget->starget);
+ vtarget->deleted = 1; /* block IO */
+ }
target_reset_list = kzalloc(sizeof(struct mptsas_target_reset_event),
GFP_ATOMIC);
@@ -1868,7 +1882,8 @@
if (ioc->sas_discovery_quiesce_io)
return SCSI_MLQUEUE_HOST_BUSY;
-// scsi_print_command(SCpnt);
+ if (ioc->debug_level & MPT_DEBUG_SCSI)
+ scsi_print_command(SCpnt);
return mptscsih_qcmd(SCpnt,done);
}
@@ -2686,6 +2701,187 @@
return error;
}
+struct rep_manu_request{
+ u8 smp_frame_type;
+ u8 function;
+ u8 reserved;
+ u8 request_length;
+};
+
+struct rep_manu_reply{
+ u8 smp_frame_type; /* 0x41 */
+ u8 function; /* 0x01 */
+ u8 function_result;
+ u8 response_length;
+ u16 expander_change_count;
+ u8 reserved0[2];
+ u8 sas_format:1;
+ u8 reserved1:7;
+ u8 reserved2[3];
+ u8 vendor_id[SAS_EXPANDER_VENDOR_ID_LEN];
+ u8 product_id[SAS_EXPANDER_PRODUCT_ID_LEN];
+ u8 product_rev[SAS_EXPANDER_PRODUCT_REV_LEN];
+ u8 component_vendor_id[SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN];
+ u16 component_id;
+ u8 component_revision_id;
+ u8 reserved3;
+ u8 vendor_specific[8];
+};
+
+/**
+ * mptsas_exp_repmanufacture_info -
+ * @ioc: per adapter object
+ * @sas_address: expander sas address
+ * @edev: the sas_expander_device object
+ *
+ * Fills in the sas_expander_device object when SMP port is created.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+static int
+mptsas_exp_repmanufacture_info(MPT_ADAPTER *ioc,
+ u64 sas_address, struct sas_expander_device *edev)
+{
+ MPT_FRAME_HDR *mf;
+ SmpPassthroughRequest_t *smpreq;
+ SmpPassthroughReply_t *smprep;
+ struct rep_manu_reply *manufacture_reply;
+ struct rep_manu_request *manufacture_request;
+ int ret;
+ int flagsLength;
+ unsigned long timeleft;
+ char *psge;
+ unsigned long flags;
+ void *data_out = NULL;
+ dma_addr_t data_out_dma = 0;
+ u32 sz;
+
+ spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
+ if (ioc->ioc_reset_in_progress) {
+ spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
+ printk(MYIOC_s_INFO_FMT "%s: host reset in progress!\n",
+ __func__, ioc->name);
+ return -EFAULT;
+ }
+ spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
+
+ ret = mutex_lock_interruptible(&ioc->sas_mgmt.mutex);
+ if (ret)
+ goto out;
+
+ mf = mpt_get_msg_frame(mptsasMgmtCtx, ioc);
+ if (!mf) {
+ ret = -ENOMEM;
+ goto out_unlock;
+ }
+
+ smpreq = (SmpPassthroughRequest_t *)mf;
+ memset(smpreq, 0, sizeof(*smpreq));
+
+ sz = sizeof(struct rep_manu_request) + sizeof(struct rep_manu_reply);
+
+ data_out = pci_alloc_consistent(ioc->pcidev, sz, &data_out_dma);
+ if (!data_out) {
+ printk(KERN_ERR "Memory allocation failure at %s:%d/%s()!\n",
+ __FILE__, __LINE__, __func__);
+ ret = -ENOMEM;
+ goto put_mf;
+ }
+
+ manufacture_request = data_out;
+ manufacture_request->smp_frame_type = 0x40;
+ manufacture_request->function = 1;
+ manufacture_request->reserved = 0;
+ manufacture_request->request_length = 0;
+
+ smpreq->Function = MPI_FUNCTION_SMP_PASSTHROUGH;
+ smpreq->PhysicalPort = 0xFF;
+ *((u64 *)&smpreq->SASAddress) = cpu_to_le64(sas_address);
+ smpreq->RequestDataLength = sizeof(struct rep_manu_request);
+
+ psge = (char *)
+ (((int *) mf) + (offsetof(SmpPassthroughRequest_t, SGL) / 4));
+
+ flagsLength = MPI_SGE_FLAGS_SIMPLE_ELEMENT |
+ MPI_SGE_FLAGS_SYSTEM_ADDRESS |
+ MPI_SGE_FLAGS_HOST_TO_IOC |
+ MPI_SGE_FLAGS_END_OF_BUFFER;
+ flagsLength = flagsLength << MPI_SGE_FLAGS_SHIFT;
+ flagsLength |= sizeof(struct rep_manu_request);
+
+ ioc->add_sge(psge, flagsLength, data_out_dma);
+ psge += ioc->SGE_size;
+
+ flagsLength = MPI_SGE_FLAGS_SIMPLE_ELEMENT |
+ MPI_SGE_FLAGS_SYSTEM_ADDRESS |
+ MPI_SGE_FLAGS_IOC_TO_HOST |
+ MPI_SGE_FLAGS_END_OF_BUFFER;
+ flagsLength = flagsLength << MPI_SGE_FLAGS_SHIFT;
+ flagsLength |= sizeof(struct rep_manu_reply);
+ ioc->add_sge(psge, flagsLength, data_out_dma +
+ sizeof(struct rep_manu_request));
+
+ INITIALIZE_MGMT_STATUS(ioc->sas_mgmt.status)
+ mpt_put_msg_frame(mptsasMgmtCtx, ioc, mf);
+
+ timeleft = wait_for_completion_timeout(&ioc->sas_mgmt.done, 10 * HZ);
+ if (!(ioc->sas_mgmt.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
+ ret = -ETIME;
+ mpt_free_msg_frame(ioc, mf);
+ mf = NULL;
+ if (ioc->sas_mgmt.status & MPT_MGMT_STATUS_DID_IOCRESET)
+ goto out_free;
+ if (!timeleft)
+ mpt_HardResetHandler(ioc, CAN_SLEEP);
+ goto out_free;
+ }
+
+ mf = NULL;
+
+ if (ioc->sas_mgmt.status & MPT_MGMT_STATUS_RF_VALID) {
+ u8 *tmp;
+
+ smprep = (SmpPassthroughReply_t *)ioc->sas_mgmt.reply;
+ if (le16_to_cpu(smprep->ResponseDataLength) !=
+ sizeof(struct rep_manu_reply))
+ goto out_free;
+
+ manufacture_reply = data_out + sizeof(struct rep_manu_request);
+ strncpy(edev->vendor_id, manufacture_reply->vendor_id,
+ SAS_EXPANDER_VENDOR_ID_LEN);
+ strncpy(edev->product_id, manufacture_reply->product_id,
+ SAS_EXPANDER_PRODUCT_ID_LEN);
+ strncpy(edev->product_rev, manufacture_reply->product_rev,
+ SAS_EXPANDER_PRODUCT_REV_LEN);
+ edev->level = manufacture_reply->sas_format;
+ if (manufacture_reply->sas_format) {
+ strncpy(edev->component_vendor_id,
+ manufacture_reply->component_vendor_id,
+ SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN);
+ tmp = (u8 *)&manufacture_reply->component_id;
+ edev->component_id = tmp[0] << 8 | tmp[1];
+ edev->component_revision_id =
+ manufacture_reply->component_revision_id;
+ }
+ } else {
+ printk(MYIOC_s_ERR_FMT
+ "%s: smp passthru reply failed to be returned\n",
+ ioc->name, __func__);
+ ret = -ENXIO;
+ }
+out_free:
+ if (data_out_dma)
+ pci_free_consistent(ioc->pcidev, sz, data_out, data_out_dma);
+put_mf:
+ if (mf)
+ mpt_free_msg_frame(ioc, mf);
+out_unlock:
+ CLEAR_MGMT_STATUS(ioc->sas_mgmt.status)
+ mutex_unlock(&ioc->sas_mgmt.mutex);
+out:
+ return ret;
+ }
+
static void
mptsas_parse_device_info(struct sas_identify *identify,
struct mptsas_devinfo *device_info)
@@ -2967,6 +3163,11 @@
goto out;
}
mptsas_set_rphy(ioc, phy_info, rphy);
+ if (identify.device_type == SAS_EDGE_EXPANDER_DEVICE ||
+ identify.device_type == SAS_FANOUT_EXPANDER_DEVICE)
+ mptsas_exp_repmanufacture_info(ioc,
+ identify.sas_address,
+ rphy_to_expander_device(rphy));
}
out:
diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c
index 81279b3..4a7d1af 100644
--- a/drivers/message/fusion/mptscsih.c
+++ b/drivers/message/fusion/mptscsih.c
@@ -1438,9 +1438,14 @@
&& (vdevice->vtarget->tflags & MPT_TARGET_FLAGS_Q_YES)
&& (SCpnt->device->tagged_supported)) {
scsictl = scsidir | MPI_SCSIIO_CONTROL_SIMPLEQ;
- } else {
+ if (SCpnt->request && SCpnt->request->ioprio) {
+ if (((SCpnt->request->ioprio & 0x7) == 1) ||
+ !(SCpnt->request->ioprio & 0x7))
+ scsictl |= MPI_SCSIIO_CONTROL_HEADOFQ;
+ }
+ } else
scsictl = scsidir | MPI_SCSIIO_CONTROL_UNTAGGED;
- }
+
/* Use the above information to set up the message frame
*/
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 8782978..413576a 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -348,6 +348,16 @@
read/write functions for the devices to get access to this chip.
This chip embeds various other multimedia funtionalities as well.
+config MFD_TIMBERDALE
+ tristate "Support for the Timberdale FPGA"
+ select MFD_CORE
+ depends on PCI && GPIOLIB
+ ---help---
+ This is the core driver for the timberdale FPGA. This device is a
+ multifunction device which exposes numerous platform devices.
+
+ The timberdale FPGA can be found on the Intel Atom development board
+ for in-vehicle infontainment, called Russellville.
endmenu
menu "Multimedia Capabilities Port drivers"
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index e09eb48..78295d6 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -54,5 +54,6 @@
obj-$(CONFIG_AB3100_CORE) += ab3100-core.o
obj-$(CONFIG_AB3100_OTP) += ab3100-otp.o
obj-$(CONFIG_AB4500_CORE) += ab4500-core.o
+obj-$(CONFIG_MFD_TIMBERDALE) += timberdale.o
obj-$(CONFIG_MFD_88PM8607) += 88pm8607.o
-obj-$(CONFIG_PMIC_ADP5520) += adp5520.o
\ No newline at end of file
+obj-$(CONFIG_PMIC_ADP5520) += adp5520.o
diff --git a/drivers/mfd/timberdale.c b/drivers/mfd/timberdale.c
new file mode 100644
index 0000000..1ed44d2
--- /dev/null
+++ b/drivers/mfd/timberdale.c
@@ -0,0 +1,727 @@
+/*
+ * timberdale.c timberdale FPGA MFD driver
+ * Copyright (c) 2009 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/* Supports:
+ * Timberdale FPGA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/msi.h>
+#include <linux/mfd/core.h>
+
+#include <linux/timb_gpio.h>
+
+#include <linux/i2c.h>
+#include <linux/i2c-ocores.h>
+#include <linux/i2c/tsc2007.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/xilinx_spi.h>
+#include <linux/spi/max7301.h>
+#include <linux/spi/mc33880.h>
+
+#include <media/timb_radio.h>
+
+#include "timberdale.h"
+
+#define DRIVER_NAME "timberdale"
+
+struct timberdale_device {
+ resource_size_t ctl_mapbase;
+ unsigned char __iomem *ctl_membase;
+ struct {
+ u32 major;
+ u32 minor;
+ u32 config;
+ } fw;
+};
+
+/*--------------------------------------------------------------------------*/
+
+static struct tsc2007_platform_data timberdale_tsc2007_platform_data = {
+ .model = 2003,
+ .x_plate_ohms = 100
+};
+
+static struct i2c_board_info timberdale_i2c_board_info[] = {
+ {
+ I2C_BOARD_INFO("tsc2007", 0x48),
+ .platform_data = &timberdale_tsc2007_platform_data,
+ .irq = IRQ_TIMBERDALE_TSC_INT
+ },
+};
+
+static __devinitdata struct ocores_i2c_platform_data
+timberdale_ocores_platform_data = {
+ .regstep = 4,
+ .clock_khz = 62500,
+ .devices = timberdale_i2c_board_info,
+ .num_devices = ARRAY_SIZE(timberdale_i2c_board_info)
+};
+
+const static __devinitconst struct resource timberdale_ocores_resources[] = {
+ {
+ .start = OCORESOFFSET,
+ .end = OCORESEND,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_TIMBERDALE_I2C,
+ .end = IRQ_TIMBERDALE_I2C,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+const struct max7301_platform_data timberdale_max7301_platform_data = {
+ .base = 200
+};
+
+const struct mc33880_platform_data timberdale_mc33880_platform_data = {
+ .base = 100
+};
+
+static struct spi_board_info timberdale_spi_16bit_board_info[] = {
+ {
+ .modalias = "max7301",
+ .max_speed_hz = 26000,
+ .chip_select = 2,
+ .mode = SPI_MODE_0,
+ .platform_data = &timberdale_max7301_platform_data
+ },
+};
+
+static struct spi_board_info timberdale_spi_8bit_board_info[] = {
+ {
+ .modalias = "mc33880",
+ .max_speed_hz = 4000,
+ .chip_select = 1,
+ .mode = SPI_MODE_1,
+ .platform_data = &timberdale_mc33880_platform_data
+ },
+};
+
+static __devinitdata struct xspi_platform_data timberdale_xspi_platform_data = {
+ .num_chipselect = 3,
+ .little_endian = true,
+ /* bits per word and devices will be filled in runtime depending
+ * on the HW config
+ */
+};
+
+const static __devinitconst struct resource timberdale_spi_resources[] = {
+ {
+ .start = SPIOFFSET,
+ .end = SPIEND,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_TIMBERDALE_SPI,
+ .end = IRQ_TIMBERDALE_SPI,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+const static __devinitconst struct resource timberdale_eth_resources[] = {
+ {
+ .start = ETHOFFSET,
+ .end = ETHEND,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_TIMBERDALE_ETHSW_IF,
+ .end = IRQ_TIMBERDALE_ETHSW_IF,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static __devinitdata struct timbgpio_platform_data
+ timberdale_gpio_platform_data = {
+ .gpio_base = 0,
+ .nr_pins = GPIO_NR_PINS,
+ .irq_base = 200,
+};
+
+const static __devinitconst struct resource timberdale_gpio_resources[] = {
+ {
+ .start = GPIOOFFSET,
+ .end = GPIOEND,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_TIMBERDALE_GPIO,
+ .end = IRQ_TIMBERDALE_GPIO,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+const static __devinitconst struct resource timberdale_mlogicore_resources[] = {
+ {
+ .start = MLCOREOFFSET,
+ .end = MLCOREEND,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_TIMBERDALE_MLCORE,
+ .end = IRQ_TIMBERDALE_MLCORE,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_TIMBERDALE_MLCORE_BUF,
+ .end = IRQ_TIMBERDALE_MLCORE_BUF,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+const static __devinitconst struct resource timberdale_uart_resources[] = {
+ {
+ .start = UARTOFFSET,
+ .end = UARTEND,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_TIMBERDALE_UART,
+ .end = IRQ_TIMBERDALE_UART,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+const static __devinitconst struct resource timberdale_uartlite_resources[] = {
+ {
+ .start = UARTLITEOFFSET,
+ .end = UARTLITEEND,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_TIMBERDALE_UARTLITE,
+ .end = IRQ_TIMBERDALE_UARTLITE,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+const static __devinitconst struct resource timberdale_radio_resources[] = {
+ {
+ .start = RDSOFFSET,
+ .end = RDSEND,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_TIMBERDALE_RDS,
+ .end = IRQ_TIMBERDALE_RDS,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static __devinitdata struct i2c_board_info timberdale_tef6868_i2c_board_info = {
+ I2C_BOARD_INFO("tef6862", 0x60)
+};
+
+static __devinitdata struct i2c_board_info timberdale_saa7706_i2c_board_info = {
+ I2C_BOARD_INFO("saa7706h", 0x1C)
+};
+
+static __devinitdata struct timb_radio_platform_data
+ timberdale_radio_platform_data = {
+ .i2c_adapter = 0,
+ .tuner = {
+ .module_name = "tef6862",
+ .info = &timberdale_tef6868_i2c_board_info
+ },
+ .dsp = {
+ .module_name = "saa7706h",
+ .info = &timberdale_saa7706_i2c_board_info
+ }
+};
+
+const static __devinitconst struct resource timberdale_dma_resources[] = {
+ {
+ .start = DMAOFFSET,
+ .end = DMAEND,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_TIMBERDALE_DMA,
+ .end = IRQ_TIMBERDALE_DMA,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static __devinitdata struct mfd_cell timberdale_cells_bar0_cfg0[] = {
+ {
+ .name = "timb-uart",
+ .num_resources = ARRAY_SIZE(timberdale_uart_resources),
+ .resources = timberdale_uart_resources,
+ },
+ {
+ .name = "timb-gpio",
+ .num_resources = ARRAY_SIZE(timberdale_gpio_resources),
+ .resources = timberdale_gpio_resources,
+ .platform_data = &timberdale_gpio_platform_data,
+ .data_size = sizeof(timberdale_gpio_platform_data),
+ },
+ {
+ .name = "timb-radio",
+ .num_resources = ARRAY_SIZE(timberdale_radio_resources),
+ .resources = timberdale_radio_resources,
+ .platform_data = &timberdale_radio_platform_data,
+ .data_size = sizeof(timberdale_radio_platform_data),
+ },
+ {
+ .name = "xilinx_spi",
+ .num_resources = ARRAY_SIZE(timberdale_spi_resources),
+ .resources = timberdale_spi_resources,
+ .platform_data = &timberdale_xspi_platform_data,
+ .data_size = sizeof(timberdale_xspi_platform_data),
+ },
+ {
+ .name = "ks8842",
+ .num_resources = ARRAY_SIZE(timberdale_eth_resources),
+ .resources = timberdale_eth_resources,
+ },
+ {
+ .name = "timb-dma",
+ .num_resources = ARRAY_SIZE(timberdale_dma_resources),
+ .resources = timberdale_dma_resources,
+ },
+};
+
+static __devinitdata struct mfd_cell timberdale_cells_bar0_cfg1[] = {
+ {
+ .name = "timb-uart",
+ .num_resources = ARRAY_SIZE(timberdale_uart_resources),
+ .resources = timberdale_uart_resources,
+ },
+ {
+ .name = "uartlite",
+ .num_resources = ARRAY_SIZE(timberdale_uartlite_resources),
+ .resources = timberdale_uartlite_resources,
+ },
+ {
+ .name = "timb-gpio",
+ .num_resources = ARRAY_SIZE(timberdale_gpio_resources),
+ .resources = timberdale_gpio_resources,
+ .platform_data = &timberdale_gpio_platform_data,
+ .data_size = sizeof(timberdale_gpio_platform_data),
+ },
+ {
+ .name = "timb-mlogicore",
+ .num_resources = ARRAY_SIZE(timberdale_mlogicore_resources),
+ .resources = timberdale_mlogicore_resources,
+ },
+ {
+ .name = "timb-radio",
+ .num_resources = ARRAY_SIZE(timberdale_radio_resources),
+ .resources = timberdale_radio_resources,
+ .platform_data = &timberdale_radio_platform_data,
+ .data_size = sizeof(timberdale_radio_platform_data),
+ },
+ {
+ .name = "xilinx_spi",
+ .num_resources = ARRAY_SIZE(timberdale_spi_resources),
+ .resources = timberdale_spi_resources,
+ .platform_data = &timberdale_xspi_platform_data,
+ .data_size = sizeof(timberdale_xspi_platform_data),
+ },
+ {
+ .name = "ks8842",
+ .num_resources = ARRAY_SIZE(timberdale_eth_resources),
+ .resources = timberdale_eth_resources,
+ },
+ {
+ .name = "timb-dma",
+ .num_resources = ARRAY_SIZE(timberdale_dma_resources),
+ .resources = timberdale_dma_resources,
+ },
+};
+
+static __devinitdata struct mfd_cell timberdale_cells_bar0_cfg2[] = {
+ {
+ .name = "timb-uart",
+ .num_resources = ARRAY_SIZE(timberdale_uart_resources),
+ .resources = timberdale_uart_resources,
+ },
+ {
+ .name = "timb-gpio",
+ .num_resources = ARRAY_SIZE(timberdale_gpio_resources),
+ .resources = timberdale_gpio_resources,
+ .platform_data = &timberdale_gpio_platform_data,
+ .data_size = sizeof(timberdale_gpio_platform_data),
+ },
+ {
+ .name = "timb-radio",
+ .num_resources = ARRAY_SIZE(timberdale_radio_resources),
+ .resources = timberdale_radio_resources,
+ .platform_data = &timberdale_radio_platform_data,
+ .data_size = sizeof(timberdale_radio_platform_data),
+ },
+ {
+ .name = "xilinx_spi",
+ .num_resources = ARRAY_SIZE(timberdale_spi_resources),
+ .resources = timberdale_spi_resources,
+ .platform_data = &timberdale_xspi_platform_data,
+ .data_size = sizeof(timberdale_xspi_platform_data),
+ },
+ {
+ .name = "timb-dma",
+ .num_resources = ARRAY_SIZE(timberdale_dma_resources),
+ .resources = timberdale_dma_resources,
+ },
+};
+
+static __devinitdata struct mfd_cell timberdale_cells_bar0_cfg3[] = {
+ {
+ .name = "timb-uart",
+ .num_resources = ARRAY_SIZE(timberdale_uart_resources),
+ .resources = timberdale_uart_resources,
+ },
+ {
+ .name = "ocores-i2c",
+ .num_resources = ARRAY_SIZE(timberdale_ocores_resources),
+ .resources = timberdale_ocores_resources,
+ .platform_data = &timberdale_ocores_platform_data,
+ .data_size = sizeof(timberdale_ocores_platform_data),
+ },
+ {
+ .name = "timb-gpio",
+ .num_resources = ARRAY_SIZE(timberdale_gpio_resources),
+ .resources = timberdale_gpio_resources,
+ .platform_data = &timberdale_gpio_platform_data,
+ .data_size = sizeof(timberdale_gpio_platform_data),
+ },
+ {
+ .name = "timb-radio",
+ .num_resources = ARRAY_SIZE(timberdale_radio_resources),
+ .resources = timberdale_radio_resources,
+ .platform_data = &timberdale_radio_platform_data,
+ .data_size = sizeof(timberdale_radio_platform_data),
+ },
+ {
+ .name = "xilinx_spi",
+ .num_resources = ARRAY_SIZE(timberdale_spi_resources),
+ .resources = timberdale_spi_resources,
+ .platform_data = &timberdale_xspi_platform_data,
+ .data_size = sizeof(timberdale_xspi_platform_data),
+ },
+ {
+ .name = "ks8842",
+ .num_resources = ARRAY_SIZE(timberdale_eth_resources),
+ .resources = timberdale_eth_resources,
+ },
+ {
+ .name = "timb-dma",
+ .num_resources = ARRAY_SIZE(timberdale_dma_resources),
+ .resources = timberdale_dma_resources,
+ },
+};
+
+static const __devinitconst struct resource timberdale_sdhc_resources[] = {
+ /* located in bar 1 and bar 2 */
+ {
+ .start = SDHC0OFFSET,
+ .end = SDHC0END,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_TIMBERDALE_SDHC,
+ .end = IRQ_TIMBERDALE_SDHC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static __devinitdata struct mfd_cell timberdale_cells_bar1[] = {
+ {
+ .name = "sdhci",
+ .num_resources = ARRAY_SIZE(timberdale_sdhc_resources),
+ .resources = timberdale_sdhc_resources,
+ },
+};
+
+static __devinitdata struct mfd_cell timberdale_cells_bar2[] = {
+ {
+ .name = "sdhci",
+ .num_resources = ARRAY_SIZE(timberdale_sdhc_resources),
+ .resources = timberdale_sdhc_resources,
+ },
+};
+
+static ssize_t show_fw_ver(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct timberdale_device *priv = pci_get_drvdata(pdev);
+
+ return sprintf(buf, "%d.%d.%d\n", priv->fw.major, priv->fw.minor,
+ priv->fw.config);
+}
+
+static DEVICE_ATTR(fw_ver, S_IRUGO, show_fw_ver, NULL);
+
+/*--------------------------------------------------------------------------*/
+
+static int __devinit timb_probe(struct pci_dev *dev,
+ const struct pci_device_id *id)
+{
+ struct timberdale_device *priv;
+ int err, i;
+ resource_size_t mapbase;
+ struct msix_entry *msix_entries = NULL;
+ u8 ip_setup;
+
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ pci_set_drvdata(dev, priv);
+
+ err = pci_enable_device(dev);
+ if (err)
+ goto err_enable;
+
+ mapbase = pci_resource_start(dev, 0);
+ if (!mapbase) {
+ dev_err(&dev->dev, "No resource\n");
+ goto err_start;
+ }
+
+ /* create a resource for the PCI master register */
+ priv->ctl_mapbase = mapbase + CHIPCTLOFFSET;
+ if (!request_mem_region(priv->ctl_mapbase, CHIPCTLSIZE, "timb-ctl")) {
+ dev_err(&dev->dev, "Failed to request ctl mem\n");
+ goto err_request;
+ }
+
+ priv->ctl_membase = ioremap(priv->ctl_mapbase, CHIPCTLSIZE);
+ if (!priv->ctl_membase) {
+ dev_err(&dev->dev, "ioremap failed for ctl mem\n");
+ goto err_ioremap;
+ }
+
+ /* read the HW config */
+ priv->fw.major = ioread32(priv->ctl_membase + TIMB_REV_MAJOR);
+ priv->fw.minor = ioread32(priv->ctl_membase + TIMB_REV_MINOR);
+ priv->fw.config = ioread32(priv->ctl_membase + TIMB_HW_CONFIG);
+
+ if (priv->fw.major > TIMB_SUPPORTED_MAJOR) {
+ dev_err(&dev->dev, "The driver supports an older "
+ "version of the FPGA, please update the driver to "
+ "support %d.%d\n", priv->fw.major, priv->fw.minor);
+ goto err_ioremap;
+ }
+ if (priv->fw.major < TIMB_SUPPORTED_MAJOR ||
+ priv->fw.minor < TIMB_REQUIRED_MINOR) {
+ dev_err(&dev->dev, "The FPGA image is too old (%d.%d), "
+ "please upgrade the FPGA to at least: %d.%d\n",
+ priv->fw.major, priv->fw.minor,
+ TIMB_SUPPORTED_MAJOR, TIMB_REQUIRED_MINOR);
+ goto err_ioremap;
+ }
+
+ msix_entries = kzalloc(TIMBERDALE_NR_IRQS * sizeof(*msix_entries),
+ GFP_KERNEL);
+ if (!msix_entries)
+ goto err_ioremap;
+
+ for (i = 0; i < TIMBERDALE_NR_IRQS; i++)
+ msix_entries[i].entry = i;
+
+ err = pci_enable_msix(dev, msix_entries, TIMBERDALE_NR_IRQS);
+ if (err) {
+ dev_err(&dev->dev,
+ "MSI-X init failed: %d, expected entries: %d\n",
+ err, TIMBERDALE_NR_IRQS);
+ goto err_msix;
+ }
+
+ err = device_create_file(&dev->dev, &dev_attr_fw_ver);
+ if (err)
+ goto err_create_file;
+
+ /* Reset all FPGA PLB peripherals */
+ iowrite32(0x1, priv->ctl_membase + TIMB_SW_RST);
+
+ /* update IRQ offsets in I2C board info */
+ for (i = 0; i < ARRAY_SIZE(timberdale_i2c_board_info); i++)
+ timberdale_i2c_board_info[i].irq =
+ msix_entries[timberdale_i2c_board_info[i].irq].vector;
+
+ /* Update the SPI configuration depending on the HW (8 or 16 bit) */
+ if (priv->fw.config & TIMB_HW_CONFIG_SPI_8BIT) {
+ timberdale_xspi_platform_data.bits_per_word = 8;
+ timberdale_xspi_platform_data.devices =
+ timberdale_spi_8bit_board_info;
+ timberdale_xspi_platform_data.num_devices =
+ ARRAY_SIZE(timberdale_spi_8bit_board_info);
+ } else {
+ timberdale_xspi_platform_data.bits_per_word = 16;
+ timberdale_xspi_platform_data.devices =
+ timberdale_spi_16bit_board_info;
+ timberdale_xspi_platform_data.num_devices =
+ ARRAY_SIZE(timberdale_spi_16bit_board_info);
+ }
+
+ ip_setup = priv->fw.config & TIMB_HW_VER_MASK;
+ switch (ip_setup) {
+ case TIMB_HW_VER0:
+ err = mfd_add_devices(&dev->dev, -1,
+ timberdale_cells_bar0_cfg0,
+ ARRAY_SIZE(timberdale_cells_bar0_cfg0),
+ &dev->resource[0], msix_entries[0].vector);
+ break;
+ case TIMB_HW_VER1:
+ err = mfd_add_devices(&dev->dev, -1,
+ timberdale_cells_bar0_cfg1,
+ ARRAY_SIZE(timberdale_cells_bar0_cfg1),
+ &dev->resource[0], msix_entries[0].vector);
+ break;
+ case TIMB_HW_VER2:
+ err = mfd_add_devices(&dev->dev, -1,
+ timberdale_cells_bar0_cfg2,
+ ARRAY_SIZE(timberdale_cells_bar0_cfg2),
+ &dev->resource[0], msix_entries[0].vector);
+ break;
+ case TIMB_HW_VER3:
+ err = mfd_add_devices(&dev->dev, -1,
+ timberdale_cells_bar0_cfg3,
+ ARRAY_SIZE(timberdale_cells_bar0_cfg3),
+ &dev->resource[0], msix_entries[0].vector);
+ break;
+ default:
+ dev_err(&dev->dev, "Uknown IP setup: %d.%d.%d\n",
+ priv->fw.major, priv->fw.minor, ip_setup);
+ err = -ENODEV;
+ goto err_mfd;
+ break;
+ }
+
+ if (err) {
+ dev_err(&dev->dev, "mfd_add_devices failed: %d\n", err);
+ goto err_mfd;
+ }
+
+ err = mfd_add_devices(&dev->dev, 0,
+ timberdale_cells_bar1, ARRAY_SIZE(timberdale_cells_bar1),
+ &dev->resource[1], msix_entries[0].vector);
+ if (err) {
+ dev_err(&dev->dev, "mfd_add_devices failed: %d\n", err);
+ goto err_mfd2;
+ }
+
+ /* only version 0 and 3 have the iNand routed to SDHCI */
+ if (((priv->fw.config & TIMB_HW_VER_MASK) == TIMB_HW_VER0) ||
+ ((priv->fw.config & TIMB_HW_VER_MASK) == TIMB_HW_VER3)) {
+ err = mfd_add_devices(&dev->dev, 1, timberdale_cells_bar2,
+ ARRAY_SIZE(timberdale_cells_bar2),
+ &dev->resource[2], msix_entries[0].vector);
+ if (err) {
+ dev_err(&dev->dev, "mfd_add_devices failed: %d\n", err);
+ goto err_mfd2;
+ }
+ }
+
+ kfree(msix_entries);
+
+ dev_info(&dev->dev,
+ "Found Timberdale Card. Rev: %d.%d, HW config: 0x%02x\n",
+ priv->fw.major, priv->fw.minor, priv->fw.config);
+
+ return 0;
+
+err_mfd2:
+ mfd_remove_devices(&dev->dev);
+err_mfd:
+ device_remove_file(&dev->dev, &dev_attr_fw_ver);
+err_create_file:
+ pci_disable_msix(dev);
+err_msix:
+ iounmap(priv->ctl_membase);
+err_ioremap:
+ release_mem_region(priv->ctl_mapbase, CHIPCTLSIZE);
+err_request:
+ pci_set_drvdata(dev, NULL);
+err_start:
+ pci_disable_device(dev);
+err_enable:
+ kfree(msix_entries);
+ kfree(priv);
+ pci_set_drvdata(dev, NULL);
+ return -ENODEV;
+}
+
+static void __devexit timb_remove(struct pci_dev *dev)
+{
+ struct timberdale_device *priv = pci_get_drvdata(dev);
+
+ mfd_remove_devices(&dev->dev);
+
+ device_remove_file(&dev->dev, &dev_attr_fw_ver);
+
+ iounmap(priv->ctl_membase);
+ release_mem_region(priv->ctl_mapbase, CHIPCTLSIZE);
+
+ pci_disable_msix(dev);
+ pci_disable_device(dev);
+ pci_set_drvdata(dev, NULL);
+ kfree(priv);
+}
+
+static struct pci_device_id timberdale_pci_tbl[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_TIMB, PCI_DEVICE_ID_TIMB) },
+ { 0 }
+};
+MODULE_DEVICE_TABLE(pci, timberdale_pci_tbl);
+
+static struct pci_driver timberdale_pci_driver = {
+ .name = DRIVER_NAME,
+ .id_table = timberdale_pci_tbl,
+ .probe = timb_probe,
+ .remove = __devexit_p(timb_remove),
+};
+
+static int __init timberdale_init(void)
+{
+ int err;
+
+ err = pci_register_driver(&timberdale_pci_driver);
+ if (err < 0) {
+ printk(KERN_ERR
+ "Failed to register PCI driver for %s device.\n",
+ timberdale_pci_driver.name);
+ return -ENODEV;
+ }
+
+ printk(KERN_INFO "Driver for %s has been successfully registered.\n",
+ timberdale_pci_driver.name);
+
+ return 0;
+}
+
+static void __exit timberdale_exit(void)
+{
+ pci_unregister_driver(&timberdale_pci_driver);
+
+ printk(KERN_INFO "Driver for %s has been successfully unregistered.\n",
+ timberdale_pci_driver.name);
+}
+
+module_init(timberdale_init);
+module_exit(timberdale_exit);
+
+MODULE_AUTHOR("Mocean Laboratories <info@mocean-labs.com>");
+MODULE_VERSION(DRV_VERSION);
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mfd/timberdale.h b/drivers/mfd/timberdale.h
new file mode 100644
index 0000000..8d27ffa
--- /dev/null
+++ b/drivers/mfd/timberdale.h
@@ -0,0 +1,130 @@
+/*
+ * timberdale.h timberdale FPGA MFD driver defines
+ * Copyright (c) 2009 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/* Supports:
+ * Timberdale FPGA
+ */
+
+#ifndef MFD_TIMBERDALE_H
+#define MFD_TIMBERDALE_H
+
+#define DRV_VERSION "0.1"
+
+/* This driver only support versions >= 3.8 and < 4.0 */
+#define TIMB_SUPPORTED_MAJOR 3
+
+/* This driver only support minor >= 8 */
+#define TIMB_REQUIRED_MINOR 8
+
+/* Registers of the control area */
+#define TIMB_REV_MAJOR 0x00
+#define TIMB_REV_MINOR 0x04
+#define TIMB_HW_CONFIG 0x08
+#define TIMB_SW_RST 0x40
+
+/* bits in the TIMB_HW_CONFIG register */
+#define TIMB_HW_CONFIG_SPI_8BIT 0x80
+
+#define TIMB_HW_VER_MASK 0x0f
+#define TIMB_HW_VER0 0x00
+#define TIMB_HW_VER1 0x01
+#define TIMB_HW_VER2 0x02
+#define TIMB_HW_VER3 0x03
+
+#define OCORESOFFSET 0x0
+#define OCORESEND 0x1f
+
+#define SPIOFFSET 0x80
+#define SPIEND 0xff
+
+#define UARTLITEOFFSET 0x100
+#define UARTLITEEND 0x10f
+
+#define RDSOFFSET 0x180
+#define RDSEND 0x183
+
+#define ETHOFFSET 0x300
+#define ETHEND 0x3ff
+
+#define GPIOOFFSET 0x400
+#define GPIOEND 0x7ff
+
+#define CHIPCTLOFFSET 0x800
+#define CHIPCTLEND 0x8ff
+#define CHIPCTLSIZE (CHIPCTLEND - CHIPCTLOFFSET)
+
+#define INTCOFFSET 0xc00
+#define INTCEND 0xfff
+#define INTCSIZE (INTCEND - INTCOFFSET)
+
+#define MOSTOFFSET 0x1000
+#define MOSTEND 0x13ff
+
+#define UARTOFFSET 0x1400
+#define UARTEND 0x17ff
+
+#define XIICOFFSET 0x1800
+#define XIICEND 0x19ff
+
+#define I2SOFFSET 0x1C00
+#define I2SEND 0x1fff
+
+#define LOGIWOFFSET 0x30000
+#define LOGIWEND 0x37fff
+
+#define MLCOREOFFSET 0x40000
+#define MLCOREEND 0x43fff
+
+#define DMAOFFSET 0x01000000
+#define DMAEND 0x013fffff
+
+/* SDHC0 is placed in PCI bar 1 */
+#define SDHC0OFFSET 0x00
+#define SDHC0END 0xff
+
+/* SDHC1 is placed in PCI bar 2 */
+#define SDHC1OFFSET 0x00
+#define SDHC1END 0xff
+
+#define PCI_VENDOR_ID_TIMB 0x10ee
+#define PCI_DEVICE_ID_TIMB 0xa123
+
+#define IRQ_TIMBERDALE_INIC 0
+#define IRQ_TIMBERDALE_MLB 1
+#define IRQ_TIMBERDALE_GPIO 2
+#define IRQ_TIMBERDALE_I2C 3
+#define IRQ_TIMBERDALE_UART 4
+#define IRQ_TIMBERDALE_DMA 5
+#define IRQ_TIMBERDALE_I2S 6
+#define IRQ_TIMBERDALE_TSC_INT 7
+#define IRQ_TIMBERDALE_SDHC 8
+#define IRQ_TIMBERDALE_ADV7180 9
+#define IRQ_TIMBERDALE_ETHSW_IF 10
+#define IRQ_TIMBERDALE_SPI 11
+#define IRQ_TIMBERDALE_UARTLITE 12
+#define IRQ_TIMBERDALE_MLCORE 13
+#define IRQ_TIMBERDALE_MLCORE_BUF 14
+#define IRQ_TIMBERDALE_RDS 15
+#define TIMBERDALE_NR_IRQS 16
+
+#define GPIO_PIN_ASCB 8
+#define GPIO_PIN_INIC_RST 14
+#define GPIO_PIN_BT_RST 15
+#define GPIO_NR_PINS 16
+
+#endif
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 677cd53..bb64656 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -457,10 +457,10 @@
config MTD_NAND_SH_FLCTL
tristate "Support for NAND on Renesas SuperH FLCTL"
- depends on MTD_NAND && SUPERH && CPU_SUBTYPE_SH7723
+ depends on MTD_NAND && SUPERH
help
Several Renesas SuperH CPU has FLCTL. This option enables support
- for NAND Flash using FLCTL. This driver support SH7723.
+ for NAND Flash using FLCTL.
config MTD_NAND_DAVINCI
tristate "Support NAND on DaVinci SoC"
diff --git a/drivers/mtd/nand/sh_flctl.c b/drivers/mtd/nand/sh_flctl.c
index 02bef21..1842df8 100644
--- a/drivers/mtd/nand/sh_flctl.c
+++ b/drivers/mtd/nand/sh_flctl.c
@@ -1,10 +1,10 @@
/*
* SuperH FLCTL nand controller
*
- * Copyright © 2008 Renesas Solutions Corp.
- * Copyright © 2008 Atom Create Engineering Co., Ltd.
+ * Copyright (c) 2008 Renesas Solutions Corp.
+ * Copyright (c) 2008 Atom Create Engineering Co., Ltd.
*
- * Based on fsl_elbc_nand.c, Copyright © 2006-2007 Freescale Semiconductor
+ * Based on fsl_elbc_nand.c, Copyright (c) 2006-2007 Freescale Semiconductor
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -75,6 +75,11 @@
writeb(TRSTRT, FLTRCR(flctl));
}
+static void timeout_error(struct sh_flctl *flctl, const char *str)
+{
+ dev_err(&flctl->pdev->dev, "Timeout occured in %s\n", str);
+}
+
static void wait_completion(struct sh_flctl *flctl)
{
uint32_t timeout = LOOP_TIMEOUT_MAX;
@@ -87,7 +92,7 @@
udelay(1);
}
- printk(KERN_ERR "wait_completion(): Timeout occured \n");
+ timeout_error(flctl, __func__);
writeb(0x0, FLTRCR(flctl));
}
@@ -100,6 +105,8 @@
addr = page_addr; /* ERASE1 */
} else if (page_addr != -1) {
/* SEQIN, READ0, etc.. */
+ if (flctl->chip.options & NAND_BUSWIDTH_16)
+ column >>= 1;
if (flctl->page_size) {
addr = column & 0x0FFF;
addr |= (page_addr & 0xff) << 16;
@@ -132,7 +139,7 @@
return;
udelay(1);
}
- printk(KERN_ERR "wait_rfifo_ready(): Timeout occured \n");
+ timeout_error(flctl, __func__);
}
static void wait_wfifo_ready(struct sh_flctl *flctl)
@@ -146,7 +153,7 @@
return;
udelay(1);
}
- printk(KERN_ERR "wait_wfifo_ready(): Timeout occured \n");
+ timeout_error(flctl, __func__);
}
static int wait_recfifo_ready(struct sh_flctl *flctl, int sector_number)
@@ -198,7 +205,7 @@
writel(0, FL4ECCCR(flctl));
}
- printk(KERN_ERR "wait_recfifo_ready(): Timeout occured \n");
+ timeout_error(flctl, __func__);
return 1; /* timeout */
}
@@ -214,7 +221,7 @@
return;
udelay(1);
}
- printk(KERN_ERR "wait_wecfifo_ready(): Timeout occured \n");
+ timeout_error(flctl, __func__);
}
static void read_datareg(struct sh_flctl *flctl, int offset)
@@ -275,7 +282,7 @@
static void set_cmd_regs(struct mtd_info *mtd, uint32_t cmd, uint32_t flcmcdr_val)
{
struct sh_flctl *flctl = mtd_to_flctl(mtd);
- uint32_t flcmncr_val = readl(FLCMNCR(flctl));
+ uint32_t flcmncr_val = readl(FLCMNCR(flctl)) & ~SEL_16BIT;
uint32_t flcmdcr_val, addr_len_bytes = 0;
/* Set SNAND bit if page size is 2048byte */
@@ -297,6 +304,8 @@
case NAND_CMD_READOOB:
addr_len_bytes = flctl->rw_ADRCNT;
flcmdcr_val |= CDSRC_E;
+ if (flctl->chip.options & NAND_BUSWIDTH_16)
+ flcmncr_val |= SEL_16BIT;
break;
case NAND_CMD_SEQIN:
/* This case is that cmd is READ0 or READ1 or READ00 */
@@ -305,6 +314,8 @@
case NAND_CMD_PAGEPROG:
addr_len_bytes = flctl->rw_ADRCNT;
flcmdcr_val |= DOCMD2_E | CDSRC_E | SELRW;
+ if (flctl->chip.options & NAND_BUSWIDTH_16)
+ flcmncr_val |= SEL_16BIT;
break;
case NAND_CMD_READID:
flcmncr_val &= ~SNAND_E;
@@ -523,6 +534,8 @@
set_addr(mtd, 0, page_addr);
flctl->read_bytes = mtd->writesize + mtd->oobsize;
+ if (flctl->chip.options & NAND_BUSWIDTH_16)
+ column >>= 1;
flctl->index += column;
goto read_normal_exit;
@@ -686,6 +699,18 @@
return data;
}
+static uint16_t flctl_read_word(struct mtd_info *mtd)
+{
+ struct sh_flctl *flctl = mtd_to_flctl(mtd);
+ int index = flctl->index;
+ uint16_t data;
+ uint16_t *buf = (uint16_t *)&flctl->done_buff[index];
+
+ data = *buf;
+ flctl->index += 2;
+ return data;
+}
+
static void flctl_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
{
int i;
@@ -769,38 +794,36 @@
return 0;
}
-static int __init flctl_probe(struct platform_device *pdev)
+static int __devinit flctl_probe(struct platform_device *pdev)
{
struct resource *res;
struct sh_flctl *flctl;
struct mtd_info *flctl_mtd;
struct nand_chip *nand;
struct sh_flctl_platform_data *pdata;
- int ret;
+ int ret = -ENXIO;
pdata = pdev->dev.platform_data;
if (pdata == NULL) {
- printk(KERN_ERR "sh_flctl platform_data not found.\n");
- return -ENODEV;
+ dev_err(&pdev->dev, "no platform data defined\n");
+ return -EINVAL;
}
flctl = kzalloc(sizeof(struct sh_flctl), GFP_KERNEL);
if (!flctl) {
- printk(KERN_ERR "Unable to allocate NAND MTD dev structure.\n");
+ dev_err(&pdev->dev, "failed to allocate driver data\n");
return -ENOMEM;
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
- printk(KERN_ERR "%s: resource not found.\n", __func__);
- ret = -ENODEV;
+ dev_err(&pdev->dev, "failed to get I/O memory\n");
goto err;
}
- flctl->reg = ioremap(res->start, res->end - res->start + 1);
+ flctl->reg = ioremap(res->start, resource_size(res));
if (flctl->reg == NULL) {
- printk(KERN_ERR "%s: ioremap error.\n", __func__);
- ret = -ENOMEM;
+ dev_err(&pdev->dev, "failed to remap I/O memory\n");
goto err;
}
@@ -808,6 +831,7 @@
flctl_mtd = &flctl->mtd;
nand = &flctl->chip;
flctl_mtd->priv = nand;
+ flctl->pdev = pdev;
flctl->hwecc = pdata->has_hwecc;
flctl_register_init(flctl, pdata->flcmncr_val);
@@ -825,6 +849,11 @@
nand->select_chip = flctl_select_chip;
nand->cmdfunc = flctl_cmdfunc;
+ if (pdata->flcmncr_val & SEL_16BIT) {
+ nand->options |= NAND_BUSWIDTH_16;
+ nand->read_word = flctl_read_word;
+ }
+
ret = nand_scan_ident(flctl_mtd, 1);
if (ret)
goto err;
@@ -846,7 +875,7 @@
return ret;
}
-static int __exit flctl_remove(struct platform_device *pdev)
+static int __devexit flctl_remove(struct platform_device *pdev)
{
struct sh_flctl *flctl = platform_get_drvdata(pdev);
diff --git a/drivers/net/mace.c b/drivers/net/mace.c
index d9fbad3..43aea91 100644
--- a/drivers/net/mace.c
+++ b/drivers/net/mace.c
@@ -206,7 +206,7 @@
mp->port_aaui = port_aaui;
else {
/* Apple Network Server uses the AAUI port */
- if (machine_is_compatible("AAPL,ShinerESB"))
+ if (of_machine_is_compatible("AAPL,ShinerESB"))
mp->port_aaui = 1;
else {
#ifdef CONFIG_MACE_AAUI_PORT
diff --git a/drivers/of/Kconfig b/drivers/of/Kconfig
index d2fa27c..7cecc8f 100644
--- a/drivers/of/Kconfig
+++ b/drivers/of/Kconfig
@@ -1,3 +1,11 @@
+config OF_FLATTREE
+ bool
+ depends on OF
+
+config OF_DYNAMIC
+ def_bool y
+ depends on OF && PPC_OF
+
config OF_DEVICE
def_bool y
depends on OF && (SPARC || PPC_OF || MICROBLAZE)
diff --git a/drivers/of/Makefile b/drivers/of/Makefile
index bdfb5f5..f232cc9 100644
--- a/drivers/of/Makefile
+++ b/drivers/of/Makefile
@@ -1,4 +1,5 @@
obj-y = base.o
+obj-$(CONFIG_OF_FLATTREE) += fdt.o
obj-$(CONFIG_OF_DEVICE) += device.o platform.o
obj-$(CONFIG_OF_GPIO) += gpio.o
obj-$(CONFIG_OF_I2C) += of_i2c.o
diff --git a/drivers/of/base.c b/drivers/of/base.c
index e6627b2..cb96888 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -20,8 +20,10 @@
#include <linux/module.h>
#include <linux/of.h>
#include <linux/spinlock.h>
+#include <linux/proc_fs.h>
struct device_node *allnodes;
+struct device_node *of_chosen;
/* use when traversing tree through the allnext, child, sibling,
* or parent members of struct device_node.
@@ -37,7 +39,7 @@
np = np->parent;
ip = of_get_property(np, "#address-cells", NULL);
if (ip)
- return *ip;
+ return be32_to_cpup(ip);
} while (np->parent);
/* No #address-cells property for the root node */
return OF_ROOT_NODE_ADDR_CELLS_DEFAULT;
@@ -53,13 +55,88 @@
np = np->parent;
ip = of_get_property(np, "#size-cells", NULL);
if (ip)
- return *ip;
+ return be32_to_cpup(ip);
} while (np->parent);
/* No #size-cells property for the root node */
return OF_ROOT_NODE_SIZE_CELLS_DEFAULT;
}
EXPORT_SYMBOL(of_n_size_cells);
+#if !defined(CONFIG_SPARC) /* SPARC doesn't do ref counting (yet) */
+/**
+ * of_node_get - Increment refcount of a node
+ * @node: Node to inc refcount, NULL is supported to
+ * simplify writing of callers
+ *
+ * Returns node.
+ */
+struct device_node *of_node_get(struct device_node *node)
+{
+ if (node)
+ kref_get(&node->kref);
+ return node;
+}
+EXPORT_SYMBOL(of_node_get);
+
+static inline struct device_node *kref_to_device_node(struct kref *kref)
+{
+ return container_of(kref, struct device_node, kref);
+}
+
+/**
+ * of_node_release - release a dynamically allocated node
+ * @kref: kref element of the node to be released
+ *
+ * In of_node_put() this function is passed to kref_put()
+ * as the destructor.
+ */
+static void of_node_release(struct kref *kref)
+{
+ struct device_node *node = kref_to_device_node(kref);
+ struct property *prop = node->properties;
+
+ /* We should never be releasing nodes that haven't been detached. */
+ if (!of_node_check_flag(node, OF_DETACHED)) {
+ pr_err("ERROR: Bad of_node_put() on %s\n", node->full_name);
+ dump_stack();
+ kref_init(&node->kref);
+ return;
+ }
+
+ if (!of_node_check_flag(node, OF_DYNAMIC))
+ return;
+
+ while (prop) {
+ struct property *next = prop->next;
+ kfree(prop->name);
+ kfree(prop->value);
+ kfree(prop);
+ prop = next;
+
+ if (!prop) {
+ prop = node->deadprops;
+ node->deadprops = NULL;
+ }
+ }
+ kfree(node->full_name);
+ kfree(node->data);
+ kfree(node);
+}
+
+/**
+ * of_node_put - Decrement refcount of a node
+ * @node: Node to dec refcount, NULL is supported to
+ * simplify writing of callers
+ *
+ */
+void of_node_put(struct device_node *node)
+{
+ if (node)
+ kref_put(&node->kref, of_node_release);
+}
+EXPORT_SYMBOL(of_node_put);
+#endif /* !CONFIG_SPARC */
+
struct property *of_find_property(const struct device_node *np,
const char *name,
int *lenp)
@@ -144,6 +221,27 @@
EXPORT_SYMBOL(of_device_is_compatible);
/**
+ * of_machine_is_compatible - Test root of device tree for a given compatible value
+ * @compat: compatible string to look for in root node's compatible property.
+ *
+ * Returns true if the root node has the given value in its
+ * compatible property.
+ */
+int of_machine_is_compatible(const char *compat)
+{
+ struct device_node *root;
+ int rc = 0;
+
+ root = of_find_node_by_path("/");
+ if (root) {
+ rc = of_device_is_compatible(root, compat);
+ of_node_put(root);
+ }
+ return rc;
+}
+EXPORT_SYMBOL(of_machine_is_compatible);
+
+/**
* of_device_is_available - check if a device is available for use
*
* @device: Node to check for availability
@@ -519,6 +617,27 @@
EXPORT_SYMBOL_GPL(of_modalias_node);
/**
+ * of_find_node_by_phandle - Find a node given a phandle
+ * @handle: phandle of the node to find
+ *
+ * Returns a node pointer with refcount incremented, use
+ * of_node_put() on it when done.
+ */
+struct device_node *of_find_node_by_phandle(phandle handle)
+{
+ struct device_node *np;
+
+ read_lock(&devtree_lock);
+ for (np = allnodes; np; np = np->allnext)
+ if (np->phandle == handle)
+ break;
+ of_node_get(np);
+ read_unlock(&devtree_lock);
+ return np;
+}
+EXPORT_SYMBOL(of_find_node_by_phandle);
+
+/**
* of_parse_phandle - Resolve a phandle property to a device_node pointer
* @np: Pointer to device node holding phandle property
* @phandle_name: Name of property holding a phandle value
@@ -578,8 +697,8 @@
const void **out_args)
{
int ret = -EINVAL;
- const u32 *list;
- const u32 *list_end;
+ const __be32 *list;
+ const __be32 *list_end;
int size;
int cur_index = 0;
struct device_node *node = NULL;
@@ -593,7 +712,7 @@
list_end = list + size / sizeof(*list);
while (list < list_end) {
- const u32 *cells;
+ const __be32 *cells;
const phandle *phandle;
phandle = list++;
@@ -617,7 +736,7 @@
goto err1;
}
- list += *cells;
+ list += be32_to_cpup(cells);
if (list > list_end) {
pr_debug("%s: insufficient arguments length\n",
np->full_name);
@@ -658,3 +777,190 @@
return ret;
}
EXPORT_SYMBOL(of_parse_phandles_with_args);
+
+/**
+ * prom_add_property - Add a property to a node
+ */
+int prom_add_property(struct device_node *np, struct property *prop)
+{
+ struct property **next;
+ unsigned long flags;
+
+ prop->next = NULL;
+ write_lock_irqsave(&devtree_lock, flags);
+ next = &np->properties;
+ while (*next) {
+ if (strcmp(prop->name, (*next)->name) == 0) {
+ /* duplicate ! don't insert it */
+ write_unlock_irqrestore(&devtree_lock, flags);
+ return -1;
+ }
+ next = &(*next)->next;
+ }
+ *next = prop;
+ write_unlock_irqrestore(&devtree_lock, flags);
+
+#ifdef CONFIG_PROC_DEVICETREE
+ /* try to add to proc as well if it was initialized */
+ if (np->pde)
+ proc_device_tree_add_prop(np->pde, prop);
+#endif /* CONFIG_PROC_DEVICETREE */
+
+ return 0;
+}
+
+/**
+ * prom_remove_property - Remove a property from a node.
+ *
+ * Note that we don't actually remove it, since we have given out
+ * who-knows-how-many pointers to the data using get-property.
+ * Instead we just move the property to the "dead properties"
+ * list, so it won't be found any more.
+ */
+int prom_remove_property(struct device_node *np, struct property *prop)
+{
+ struct property **next;
+ unsigned long flags;
+ int found = 0;
+
+ write_lock_irqsave(&devtree_lock, flags);
+ next = &np->properties;
+ while (*next) {
+ if (*next == prop) {
+ /* found the node */
+ *next = prop->next;
+ prop->next = np->deadprops;
+ np->deadprops = prop;
+ found = 1;
+ break;
+ }
+ next = &(*next)->next;
+ }
+ write_unlock_irqrestore(&devtree_lock, flags);
+
+ if (!found)
+ return -ENODEV;
+
+#ifdef CONFIG_PROC_DEVICETREE
+ /* try to remove the proc node as well */
+ if (np->pde)
+ proc_device_tree_remove_prop(np->pde, prop);
+#endif /* CONFIG_PROC_DEVICETREE */
+
+ return 0;
+}
+
+/*
+ * prom_update_property - Update a property in a node.
+ *
+ * Note that we don't actually remove it, since we have given out
+ * who-knows-how-many pointers to the data using get-property.
+ * Instead we just move the property to the "dead properties" list,
+ * and add the new property to the property list
+ */
+int prom_update_property(struct device_node *np,
+ struct property *newprop,
+ struct property *oldprop)
+{
+ struct property **next;
+ unsigned long flags;
+ int found = 0;
+
+ write_lock_irqsave(&devtree_lock, flags);
+ next = &np->properties;
+ while (*next) {
+ if (*next == oldprop) {
+ /* found the node */
+ newprop->next = oldprop->next;
+ *next = newprop;
+ oldprop->next = np->deadprops;
+ np->deadprops = oldprop;
+ found = 1;
+ break;
+ }
+ next = &(*next)->next;
+ }
+ write_unlock_irqrestore(&devtree_lock, flags);
+
+ if (!found)
+ return -ENODEV;
+
+#ifdef CONFIG_PROC_DEVICETREE
+ /* try to add to proc as well if it was initialized */
+ if (np->pde)
+ proc_device_tree_update_prop(np->pde, newprop, oldprop);
+#endif /* CONFIG_PROC_DEVICETREE */
+
+ return 0;
+}
+
+#if defined(CONFIG_OF_DYNAMIC)
+/*
+ * Support for dynamic device trees.
+ *
+ * On some platforms, the device tree can be manipulated at runtime.
+ * The routines in this section support adding, removing and changing
+ * device tree nodes.
+ */
+
+/**
+ * of_attach_node - Plug a device node into the tree and global list.
+ */
+void of_attach_node(struct device_node *np)
+{
+ unsigned long flags;
+
+ write_lock_irqsave(&devtree_lock, flags);
+ np->sibling = np->parent->child;
+ np->allnext = allnodes;
+ np->parent->child = np;
+ allnodes = np;
+ write_unlock_irqrestore(&devtree_lock, flags);
+}
+
+/**
+ * of_detach_node - "Unplug" a node from the device tree.
+ *
+ * The caller must hold a reference to the node. The memory associated with
+ * the node is not freed until its refcount goes to zero.
+ */
+void of_detach_node(struct device_node *np)
+{
+ struct device_node *parent;
+ unsigned long flags;
+
+ write_lock_irqsave(&devtree_lock, flags);
+
+ parent = np->parent;
+ if (!parent)
+ goto out_unlock;
+
+ if (allnodes == np)
+ allnodes = np->allnext;
+ else {
+ struct device_node *prev;
+ for (prev = allnodes;
+ prev->allnext != np;
+ prev = prev->allnext)
+ ;
+ prev->allnext = np->allnext;
+ }
+
+ if (parent->child == np)
+ parent->child = np->sibling;
+ else {
+ struct device_node *prevsib;
+ for (prevsib = np->parent->child;
+ prevsib->sibling != np;
+ prevsib = prevsib->sibling)
+ ;
+ prevsib->sibling = np->sibling;
+ }
+
+ of_node_set_flag(np, OF_DETACHED);
+
+out_unlock:
+ write_unlock_irqrestore(&devtree_lock, flags);
+}
+#endif /* defined(CONFIG_OF_DYNAMIC) */
+
diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c
new file mode 100644
index 0000000..406757a
--- /dev/null
+++ b/drivers/of/fdt.c
@@ -0,0 +1,590 @@
+/*
+ * Functions for working with the Flattened Device Tree data format
+ *
+ * Copyright 2009 Benjamin Herrenschmidt, IBM Corp
+ * benh@kernel.crashing.org
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/initrd.h>
+#include <linux/of.h>
+#include <linux/of_fdt.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+
+#ifdef CONFIG_PPC
+#include <asm/machdep.h>
+#endif /* CONFIG_PPC */
+
+#include <asm/page.h>
+
+int __initdata dt_root_addr_cells;
+int __initdata dt_root_size_cells;
+
+struct boot_param_header *initial_boot_params;
+
+char *find_flat_dt_string(u32 offset)
+{
+ return ((char *)initial_boot_params) +
+ be32_to_cpu(initial_boot_params->off_dt_strings) + offset;
+}
+
+/**
+ * of_scan_flat_dt - scan flattened tree blob and call callback on each.
+ * @it: callback function
+ * @data: context data pointer
+ *
+ * This function is used to scan the flattened device-tree, it is
+ * used to extract the memory information at boot before we can
+ * unflatten the tree
+ */
+int __init of_scan_flat_dt(int (*it)(unsigned long node,
+ const char *uname, int depth,
+ void *data),
+ void *data)
+{
+ unsigned long p = ((unsigned long)initial_boot_params) +
+ be32_to_cpu(initial_boot_params->off_dt_struct);
+ int rc = 0;
+ int depth = -1;
+
+ do {
+ u32 tag = be32_to_cpup((__be32 *)p);
+ char *pathp;
+
+ p += 4;
+ if (tag == OF_DT_END_NODE) {
+ depth--;
+ continue;
+ }
+ if (tag == OF_DT_NOP)
+ continue;
+ if (tag == OF_DT_END)
+ break;
+ if (tag == OF_DT_PROP) {
+ u32 sz = be32_to_cpup((__be32 *)p);
+ p += 8;
+ if (be32_to_cpu(initial_boot_params->version) < 0x10)
+ p = _ALIGN(p, sz >= 8 ? 8 : 4);
+ p += sz;
+ p = _ALIGN(p, 4);
+ continue;
+ }
+ if (tag != OF_DT_BEGIN_NODE) {
+ pr_err("Invalid tag %x in flat device tree!\n", tag);
+ return -EINVAL;
+ }
+ depth++;
+ pathp = (char *)p;
+ p = _ALIGN(p + strlen(pathp) + 1, 4);
+ if ((*pathp) == '/') {
+ char *lp, *np;
+ for (lp = NULL, np = pathp; *np; np++)
+ if ((*np) == '/')
+ lp = np+1;
+ if (lp != NULL)
+ pathp = lp;
+ }
+ rc = it(p, pathp, depth, data);
+ if (rc != 0)
+ break;
+ } while (1);
+
+ return rc;
+}
+
+/**
+ * of_get_flat_dt_root - find the root node in the flat blob
+ */
+unsigned long __init of_get_flat_dt_root(void)
+{
+ unsigned long p = ((unsigned long)initial_boot_params) +
+ be32_to_cpu(initial_boot_params->off_dt_struct);
+
+ while (be32_to_cpup((__be32 *)p) == OF_DT_NOP)
+ p += 4;
+ BUG_ON(be32_to_cpup((__be32 *)p) != OF_DT_BEGIN_NODE);
+ p += 4;
+ return _ALIGN(p + strlen((char *)p) + 1, 4);
+}
+
+/**
+ * of_get_flat_dt_prop - Given a node in the flat blob, return the property ptr
+ *
+ * This function can be used within scan_flattened_dt callback to get
+ * access to properties
+ */
+void *__init of_get_flat_dt_prop(unsigned long node, const char *name,
+ unsigned long *size)
+{
+ unsigned long p = node;
+
+ do {
+ u32 tag = be32_to_cpup((__be32 *)p);
+ u32 sz, noff;
+ const char *nstr;
+
+ p += 4;
+ if (tag == OF_DT_NOP)
+ continue;
+ if (tag != OF_DT_PROP)
+ return NULL;
+
+ sz = be32_to_cpup((__be32 *)p);
+ noff = be32_to_cpup((__be32 *)(p + 4));
+ p += 8;
+ if (be32_to_cpu(initial_boot_params->version) < 0x10)
+ p = _ALIGN(p, sz >= 8 ? 8 : 4);
+
+ nstr = find_flat_dt_string(noff);
+ if (nstr == NULL) {
+ pr_warning("Can't find property index name !\n");
+ return NULL;
+ }
+ if (strcmp(name, nstr) == 0) {
+ if (size)
+ *size = sz;
+ return (void *)p;
+ }
+ p += sz;
+ p = _ALIGN(p, 4);
+ } while (1);
+}
+
+/**
+ * of_flat_dt_is_compatible - Return true if given node has compat in compatible list
+ * @node: node to test
+ * @compat: compatible string to compare with compatible list.
+ */
+int __init of_flat_dt_is_compatible(unsigned long node, const char *compat)
+{
+ const char *cp;
+ unsigned long cplen, l;
+
+ cp = of_get_flat_dt_prop(node, "compatible", &cplen);
+ if (cp == NULL)
+ return 0;
+ while (cplen > 0) {
+ if (strncasecmp(cp, compat, strlen(compat)) == 0)
+ return 1;
+ l = strlen(cp) + 1;
+ cp += l;
+ cplen -= l;
+ }
+
+ return 0;
+}
+
+static void *__init unflatten_dt_alloc(unsigned long *mem, unsigned long size,
+ unsigned long align)
+{
+ void *res;
+
+ *mem = _ALIGN(*mem, align);
+ res = (void *)*mem;
+ *mem += size;
+
+ return res;
+}
+
+/**
+ * unflatten_dt_node - Alloc and populate a device_node from the flat tree
+ * @p: pointer to node in flat tree
+ * @dad: Parent struct device_node
+ * @allnextpp: pointer to ->allnext from last allocated device_node
+ * @fpsize: Size of the node path up at the current depth.
+ */
+unsigned long __init unflatten_dt_node(unsigned long mem,
+ unsigned long *p,
+ struct device_node *dad,
+ struct device_node ***allnextpp,
+ unsigned long fpsize)
+{
+ struct device_node *np;
+ struct property *pp, **prev_pp = NULL;
+ char *pathp;
+ u32 tag;
+ unsigned int l, allocl;
+ int has_name = 0;
+ int new_format = 0;
+
+ tag = be32_to_cpup((__be32 *)(*p));
+ if (tag != OF_DT_BEGIN_NODE) {
+ pr_err("Weird tag at start of node: %x\n", tag);
+ return mem;
+ }
+ *p += 4;
+ pathp = (char *)*p;
+ l = allocl = strlen(pathp) + 1;
+ *p = _ALIGN(*p + l, 4);
+
+ /* version 0x10 has a more compact unit name here instead of the full
+ * path. we accumulate the full path size using "fpsize", we'll rebuild
+ * it later. We detect this because the first character of the name is
+ * not '/'.
+ */
+ if ((*pathp) != '/') {
+ new_format = 1;
+ if (fpsize == 0) {
+ /* root node: special case. fpsize accounts for path
+ * plus terminating zero. root node only has '/', so
+ * fpsize should be 2, but we want to avoid the first
+ * level nodes to have two '/' so we use fpsize 1 here
+ */
+ fpsize = 1;
+ allocl = 2;
+ } else {
+ /* account for '/' and path size minus terminal 0
+ * already in 'l'
+ */
+ fpsize += l;
+ allocl = fpsize;
+ }
+ }
+
+ np = unflatten_dt_alloc(&mem, sizeof(struct device_node) + allocl,
+ __alignof__(struct device_node));
+ if (allnextpp) {
+ memset(np, 0, sizeof(*np));
+ np->full_name = ((char *)np) + sizeof(struct device_node);
+ if (new_format) {
+ char *fn = np->full_name;
+ /* rebuild full path for new format */
+ if (dad && dad->parent) {
+ strcpy(fn, dad->full_name);
+#ifdef DEBUG
+ if ((strlen(fn) + l + 1) != allocl) {
+ pr_debug("%s: p: %d, l: %d, a: %d\n",
+ pathp, (int)strlen(fn),
+ l, allocl);
+ }
+#endif
+ fn += strlen(fn);
+ }
+ *(fn++) = '/';
+ memcpy(fn, pathp, l);
+ } else
+ memcpy(np->full_name, pathp, l);
+ prev_pp = &np->properties;
+ **allnextpp = np;
+ *allnextpp = &np->allnext;
+ if (dad != NULL) {
+ np->parent = dad;
+ /* we temporarily use the next field as `last_child'*/
+ if (dad->next == NULL)
+ dad->child = np;
+ else
+ dad->next->sibling = np;
+ dad->next = np;
+ }
+ kref_init(&np->kref);
+ }
+ while (1) {
+ u32 sz, noff;
+ char *pname;
+
+ tag = be32_to_cpup((__be32 *)(*p));
+ if (tag == OF_DT_NOP) {
+ *p += 4;
+ continue;
+ }
+ if (tag != OF_DT_PROP)
+ break;
+ *p += 4;
+ sz = be32_to_cpup((__be32 *)(*p));
+ noff = be32_to_cpup((__be32 *)((*p) + 4));
+ *p += 8;
+ if (be32_to_cpu(initial_boot_params->version) < 0x10)
+ *p = _ALIGN(*p, sz >= 8 ? 8 : 4);
+
+ pname = find_flat_dt_string(noff);
+ if (pname == NULL) {
+ pr_info("Can't find property name in list !\n");
+ break;
+ }
+ if (strcmp(pname, "name") == 0)
+ has_name = 1;
+ l = strlen(pname) + 1;
+ pp = unflatten_dt_alloc(&mem, sizeof(struct property),
+ __alignof__(struct property));
+ if (allnextpp) {
+ /* We accept flattened tree phandles either in
+ * ePAPR-style "phandle" properties, or the
+ * legacy "linux,phandle" properties. If both
+ * appear and have different values, things
+ * will get weird. Don't do that. */
+ if ((strcmp(pname, "phandle") == 0) ||
+ (strcmp(pname, "linux,phandle") == 0)) {
+ if (np->phandle == 0)
+ np->phandle = *((u32 *)*p);
+ }
+ /* And we process the "ibm,phandle" property
+ * used in pSeries dynamic device tree
+ * stuff */
+ if (strcmp(pname, "ibm,phandle") == 0)
+ np->phandle = *((u32 *)*p);
+ pp->name = pname;
+ pp->length = sz;
+ pp->value = (void *)*p;
+ *prev_pp = pp;
+ prev_pp = &pp->next;
+ }
+ *p = _ALIGN((*p) + sz, 4);
+ }
+ /* with version 0x10 we may not have the name property, recreate
+ * it here from the unit name if absent
+ */
+ if (!has_name) {
+ char *p1 = pathp, *ps = pathp, *pa = NULL;
+ int sz;
+
+ while (*p1) {
+ if ((*p1) == '@')
+ pa = p1;
+ if ((*p1) == '/')
+ ps = p1 + 1;
+ p1++;
+ }
+ if (pa < ps)
+ pa = p1;
+ sz = (pa - ps) + 1;
+ pp = unflatten_dt_alloc(&mem, sizeof(struct property) + sz,
+ __alignof__(struct property));
+ if (allnextpp) {
+ pp->name = "name";
+ pp->length = sz;
+ pp->value = pp + 1;
+ *prev_pp = pp;
+ prev_pp = &pp->next;
+ memcpy(pp->value, ps, sz - 1);
+ ((char *)pp->value)[sz - 1] = 0;
+ pr_debug("fixed up name for %s -> %s\n", pathp,
+ (char *)pp->value);
+ }
+ }
+ if (allnextpp) {
+ *prev_pp = NULL;
+ np->name = of_get_property(np, "name", NULL);
+ np->type = of_get_property(np, "device_type", NULL);
+
+ if (!np->name)
+ np->name = "<NULL>";
+ if (!np->type)
+ np->type = "<NULL>";
+ }
+ while (tag == OF_DT_BEGIN_NODE) {
+ mem = unflatten_dt_node(mem, p, np, allnextpp, fpsize);
+ tag = be32_to_cpup((__be32 *)(*p));
+ }
+ if (tag != OF_DT_END_NODE) {
+ pr_err("Weird tag at end of node: %x\n", tag);
+ return mem;
+ }
+ *p += 4;
+ return mem;
+}
+
+#ifdef CONFIG_BLK_DEV_INITRD
+/**
+ * early_init_dt_check_for_initrd - Decode initrd location from flat tree
+ * @node: reference to node containing initrd location ('chosen')
+ */
+void __init early_init_dt_check_for_initrd(unsigned long node)
+{
+ unsigned long start, end, len;
+ __be32 *prop;
+
+ pr_debug("Looking for initrd properties... ");
+
+ prop = of_get_flat_dt_prop(node, "linux,initrd-start", &len);
+ if (!prop)
+ return;
+ start = of_read_ulong(prop, len/4);
+
+ prop = of_get_flat_dt_prop(node, "linux,initrd-end", &len);
+ if (!prop)
+ return;
+ end = of_read_ulong(prop, len/4);
+
+ early_init_dt_setup_initrd_arch(start, end);
+ pr_debug("initrd_start=0x%lx initrd_end=0x%lx\n", start, end);
+}
+#else
+inline void early_init_dt_check_for_initrd(unsigned long node)
+{
+}
+#endif /* CONFIG_BLK_DEV_INITRD */
+
+/**
+ * early_init_dt_scan_root - fetch the top level address and size cells
+ */
+int __init early_init_dt_scan_root(unsigned long node, const char *uname,
+ int depth, void *data)
+{
+ __be32 *prop;
+
+ if (depth != 0)
+ return 0;
+
+ dt_root_size_cells = OF_ROOT_NODE_SIZE_CELLS_DEFAULT;
+ dt_root_addr_cells = OF_ROOT_NODE_ADDR_CELLS_DEFAULT;
+
+ prop = of_get_flat_dt_prop(node, "#size-cells", NULL);
+ if (prop)
+ dt_root_size_cells = be32_to_cpup(prop);
+ pr_debug("dt_root_size_cells = %x\n", dt_root_size_cells);
+
+ prop = of_get_flat_dt_prop(node, "#address-cells", NULL);
+ if (prop)
+ dt_root_addr_cells = be32_to_cpup(prop);
+ pr_debug("dt_root_addr_cells = %x\n", dt_root_addr_cells);
+
+ /* break now */
+ return 1;
+}
+
+u64 __init dt_mem_next_cell(int s, __be32 **cellp)
+{
+ __be32 *p = *cellp;
+
+ *cellp = p + s;
+ return of_read_number(p, s);
+}
+
+/**
+ * early_init_dt_scan_memory - Look for an parse memory nodes
+ */
+int __init early_init_dt_scan_memory(unsigned long node, const char *uname,
+ int depth, void *data)
+{
+ char *type = of_get_flat_dt_prop(node, "device_type", NULL);
+ __be32 *reg, *endp;
+ unsigned long l;
+
+ /* We are scanning "memory" nodes only */
+ if (type == NULL) {
+ /*
+ * The longtrail doesn't have a device_type on the
+ * /memory node, so look for the node called /memory@0.
+ */
+ if (depth != 1 || strcmp(uname, "memory@0") != 0)
+ return 0;
+ } else if (strcmp(type, "memory") != 0)
+ return 0;
+
+ reg = of_get_flat_dt_prop(node, "linux,usable-memory", &l);
+ if (reg == NULL)
+ reg = of_get_flat_dt_prop(node, "reg", &l);
+ if (reg == NULL)
+ return 0;
+
+ endp = reg + (l / sizeof(__be32));
+
+ pr_debug("memory scan node %s, reg size %ld, data: %x %x %x %x,\n",
+ uname, l, reg[0], reg[1], reg[2], reg[3]);
+
+ while ((endp - reg) >= (dt_root_addr_cells + dt_root_size_cells)) {
+ u64 base, size;
+
+ base = dt_mem_next_cell(dt_root_addr_cells, ®);
+ size = dt_mem_next_cell(dt_root_size_cells, ®);
+
+ if (size == 0)
+ continue;
+ pr_debug(" - %llx , %llx\n", (unsigned long long)base,
+ (unsigned long long)size);
+
+ early_init_dt_add_memory_arch(base, size);
+ }
+
+ return 0;
+}
+
+int __init early_init_dt_scan_chosen(unsigned long node, const char *uname,
+ int depth, void *data)
+{
+ unsigned long l;
+ char *p;
+
+ pr_debug("search \"chosen\", depth: %d, uname: %s\n", depth, uname);
+
+ if (depth != 1 ||
+ (strcmp(uname, "chosen") != 0 && strcmp(uname, "chosen@0") != 0))
+ return 0;
+
+ early_init_dt_check_for_initrd(node);
+
+ /* Retreive command line */
+ p = of_get_flat_dt_prop(node, "bootargs", &l);
+ if (p != NULL && l > 0)
+ strlcpy(cmd_line, p, min((int)l, COMMAND_LINE_SIZE));
+
+#ifdef CONFIG_CMDLINE
+#ifndef CONFIG_CMDLINE_FORCE
+ if (p == NULL || l == 0 || (l == 1 && (*p) == 0))
+#endif
+ strlcpy(cmd_line, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
+#endif /* CONFIG_CMDLINE */
+
+ early_init_dt_scan_chosen_arch(node);
+
+ pr_debug("Command line is: %s\n", cmd_line);
+
+ /* break now */
+ return 1;
+}
+
+/**
+ * unflatten_device_tree - create tree of device_nodes from flat blob
+ *
+ * unflattens the device-tree passed by the firmware, creating the
+ * tree of struct device_node. It also fills the "name" and "type"
+ * pointers of the nodes so the normal device-tree walking functions
+ * can be used.
+ */
+void __init unflatten_device_tree(void)
+{
+ unsigned long start, mem, size;
+ struct device_node **allnextp = &allnodes;
+
+ pr_debug(" -> unflatten_device_tree()\n");
+
+ /* First pass, scan for size */
+ start = ((unsigned long)initial_boot_params) +
+ be32_to_cpu(initial_boot_params->off_dt_struct);
+ size = unflatten_dt_node(0, &start, NULL, NULL, 0);
+ size = (size | 3) + 1;
+
+ pr_debug(" size is %lx, allocating...\n", size);
+
+ /* Allocate memory for the expanded device tree */
+ mem = early_init_dt_alloc_memory_arch(size + 4,
+ __alignof__(struct device_node));
+ mem = (unsigned long) __va(mem);
+
+ ((__be32 *)mem)[size / 4] = cpu_to_be32(0xdeadbeef);
+
+ pr_debug(" unflattening %lx...\n", mem);
+
+ /* Second pass, do actual unflattening */
+ start = ((unsigned long)initial_boot_params) +
+ be32_to_cpu(initial_boot_params->off_dt_struct);
+ unflatten_dt_node(mem, &start, NULL, &allnextp, 0);
+ if (be32_to_cpup((__be32 *)start) != OF_DT_END)
+ pr_warning("Weird tag at end of tree: %08x\n", *((u32 *)start));
+ if (be32_to_cpu(((__be32 *)mem)[size / 4]) != 0xdeadbeef)
+ pr_warning("End of tree marker overwritten: %08x\n",
+ be32_to_cpu(((__be32 *)mem)[size / 4]));
+ *allnextp = NULL;
+
+ /* Get pointer to OF "/chosen" node for use everywhere */
+ of_chosen = of_find_node_by_path("/chosen");
+ if (of_chosen == NULL)
+ of_chosen = of_find_node_by_path("/chosen@0");
+
+ pr_debug(" <- unflatten_device_tree()\n");
+}
diff --git a/drivers/of/gpio.c b/drivers/of/gpio.c
index 6eea601..24c3606 100644
--- a/drivers/of/gpio.c
+++ b/drivers/of/gpio.c
@@ -36,7 +36,7 @@
struct of_gpio_chip *of_gc = NULL;
int size;
const void *gpio_spec;
- const u32 *gpio_cells;
+ const __be32 *gpio_cells;
ret = of_parse_phandles_with_args(np, "gpios", "#gpio-cells", index,
&gc, &gpio_spec);
@@ -55,7 +55,7 @@
gpio_cells = of_get_property(gc, "#gpio-cells", &size);
if (!gpio_cells || size != sizeof(*gpio_cells) ||
- *gpio_cells != of_gc->gpio_cells) {
+ be32_to_cpup(gpio_cells) != of_gc->gpio_cells) {
pr_debug("%s: wrong #gpio-cells for %s\n",
np->full_name, gc->full_name);
ret = -EINVAL;
@@ -127,7 +127,8 @@
int of_gpio_simple_xlate(struct of_gpio_chip *of_gc, struct device_node *np,
const void *gpio_spec, enum of_gpio_flags *flags)
{
- const u32 *gpio = gpio_spec;
+ const __be32 *gpio = gpio_spec;
+ const u32 n = be32_to_cpup(gpio);
/*
* We're discouraging gpio_cells < 2, since that way you'll have to
@@ -140,13 +141,13 @@
return -EINVAL;
}
- if (*gpio > of_gc->gc.ngpio)
+ if (n > of_gc->gc.ngpio)
return -EINVAL;
if (flags)
- *flags = gpio[1];
+ *flags = be32_to_cpu(gpio[1]);
- return *gpio;
+ return n;
}
EXPORT_SYMBOL(of_gpio_simple_xlate);
diff --git a/drivers/of/of_i2c.c b/drivers/of/of_i2c.c
index fa65a2b..a3a708e 100644
--- a/drivers/of/of_i2c.c
+++ b/drivers/of/of_i2c.c
@@ -25,7 +25,7 @@
for_each_child_of_node(adap_node, node) {
struct i2c_board_info info = {};
struct dev_archdata dev_ad = {};
- const u32 *addr;
+ const __be32 *addr;
int len;
if (of_modalias_node(node, info.type, sizeof(info.type)) < 0)
@@ -40,7 +40,7 @@
info.irq = irq_of_parse_and_map(node, 0);
- info.addr = *addr;
+ info.addr = be32_to_cpup(addr);
dev_archdata_set_node(&dev_ad, node);
info.archdata = &dev_ad;
diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c
index 4b22ba5..18ecae4 100644
--- a/drivers/of/of_mdio.c
+++ b/drivers/of/of_mdio.c
@@ -51,7 +51,7 @@
/* Loop over the child nodes and register a phy_device for each one */
for_each_child_of_node(np, child) {
- const u32 *addr;
+ const __be32 *addr;
int len;
/* A PHY must have a reg property in the range [0-31] */
@@ -68,7 +68,7 @@
mdio->irq[*addr] = PHY_POLL;
}
- phy = get_phy_device(mdio, *addr);
+ phy = get_phy_device(mdio, be32_to_cpup(addr));
if (!phy) {
dev_err(&mdio->dev, "error probing PHY at address %i\n",
*addr);
@@ -160,7 +160,7 @@
struct device_node *net_np;
char bus_id[MII_BUS_ID_SIZE + 3];
struct phy_device *phy;
- const u32 *phy_id;
+ const __be32 *phy_id;
int sz;
if (!dev->dev.parent)
@@ -174,7 +174,7 @@
if (!phy_id || sz < sizeof(*phy_id))
return NULL;
- sprintf(bus_id, PHY_ID_FMT, "0", phy_id[0]);
+ sprintf(bus_id, PHY_ID_FMT, "0", be32_to_cpu(phy_id[0]));
phy = phy_connect(dev, bus_id, hndlr, 0, iface);
return IS_ERR(phy) ? NULL : phy;
diff --git a/drivers/of/of_spi.c b/drivers/of/of_spi.c
index bed0ed6..f65f48b 100644
--- a/drivers/of/of_spi.c
+++ b/drivers/of/of_spi.c
@@ -23,7 +23,7 @@
{
struct spi_device *spi;
struct device_node *nc;
- const u32 *prop;
+ const __be32 *prop;
int rc;
int len;
@@ -54,7 +54,7 @@
spi_dev_put(spi);
continue;
}
- spi->chip_select = *prop;
+ spi->chip_select = be32_to_cpup(prop);
/* Mode (clock phase/polarity/etc.) */
if (of_find_property(nc, "spi-cpha", NULL))
@@ -72,7 +72,7 @@
spi_dev_put(spi);
continue;
}
- spi->max_speed_hz = *prop;
+ spi->max_speed_hz = be32_to_cpup(prop);
/* IRQ */
spi->irq = irq_of_parse_and_map(nc, 0);
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index b1ecefa..7858a11 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -21,17 +21,6 @@
If you don't know what to do here, say N.
-config PCI_LEGACY
- bool "Enable deprecated pci_find_* API"
- depends on PCI
- default y
- help
- Say Y here if you want to include support for the deprecated
- pci_find_device() API. Most drivers have been converted over
- to using the proper hotplug APIs, so this option serves to
- include/exclude only a few drivers that are still using this
- API.
-
config PCI_DEBUG
bool "PCI Debugging"
depends on PCI && DEBUG_KERNEL
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index 4df48d5..8674c1e 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -2,14 +2,13 @@
# Makefile for the PCI bus specific drivers.
#
-obj-y += access.o bus.o probe.o remove.o pci.o quirks.o \
+obj-y += access.o bus.o probe.o remove.o pci.o \
pci-driver.o search.o pci-sysfs.o rom.o setup-res.o \
irq.o
obj-$(CONFIG_PROC_FS) += proc.o
obj-$(CONFIG_SYSFS) += slot.o
-obj-$(CONFIG_PCI_LEGACY) += legacy.o
-CFLAGS_legacy.o += -Wno-deprecated-declarations
+obj-$(CONFIG_PCI_QUIRKS) += quirks.o
# Build PCI Express stuff if needed
obj-$(CONFIG_PCIEPORTBUS) += pcie/
diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c
index cef28a7..712250f 100644
--- a/drivers/pci/bus.c
+++ b/drivers/pci/bus.c
@@ -17,6 +17,52 @@
#include "pci.h"
+void pci_bus_add_resource(struct pci_bus *bus, struct resource *res,
+ unsigned int flags)
+{
+ struct pci_bus_resource *bus_res;
+
+ bus_res = kzalloc(sizeof(struct pci_bus_resource), GFP_KERNEL);
+ if (!bus_res) {
+ dev_err(&bus->dev, "can't add %pR resource\n", res);
+ return;
+ }
+
+ bus_res->res = res;
+ bus_res->flags = flags;
+ list_add_tail(&bus_res->list, &bus->resources);
+}
+
+struct resource *pci_bus_resource_n(const struct pci_bus *bus, int n)
+{
+ struct pci_bus_resource *bus_res;
+
+ if (n < PCI_BRIDGE_RESOURCE_NUM)
+ return bus->resource[n];
+
+ n -= PCI_BRIDGE_RESOURCE_NUM;
+ list_for_each_entry(bus_res, &bus->resources, list) {
+ if (n-- == 0)
+ return bus_res->res;
+ }
+ return NULL;
+}
+EXPORT_SYMBOL_GPL(pci_bus_resource_n);
+
+void pci_bus_remove_resources(struct pci_bus *bus)
+{
+ struct pci_bus_resource *bus_res, *tmp;
+ int i;
+
+ for (i = 0; i < PCI_BRIDGE_RESOURCE_NUM; i++)
+ bus->resource[i] = 0;
+
+ list_for_each_entry_safe(bus_res, tmp, &bus->resources, list) {
+ list_del(&bus_res->list);
+ kfree(bus_res);
+ }
+}
+
/**
* pci_bus_alloc_resource - allocate a resource from a parent bus
* @bus: PCI bus
@@ -36,11 +82,14 @@
pci_bus_alloc_resource(struct pci_bus *bus, struct resource *res,
resource_size_t size, resource_size_t align,
resource_size_t min, unsigned int type_mask,
- void (*alignf)(void *, struct resource *, resource_size_t,
- resource_size_t),
+ resource_size_t (*alignf)(void *,
+ const struct resource *,
+ resource_size_t,
+ resource_size_t),
void *alignf_data)
{
int i, ret = -ENOMEM;
+ struct resource *r;
resource_size_t max = -1;
type_mask |= IORESOURCE_IO | IORESOURCE_MEM;
@@ -49,8 +98,7 @@
if (!(res->flags & IORESOURCE_MEM_64))
max = PCIBIOS_MAX_MEM_32;
- for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) {
- struct resource *r = bus->resource[i];
+ pci_bus_for_each_resource(bus, r, i) {
if (!r)
continue;
diff --git a/drivers/pci/hotplug/acpiphp_core.c b/drivers/pci/hotplug/acpiphp_core.c
index 4dd7114..efa9f2d 100644
--- a/drivers/pci/hotplug/acpiphp_core.c
+++ b/drivers/pci/hotplug/acpiphp_core.c
@@ -332,8 +332,6 @@
slot->hotplug_slot->info->attention_status = 0;
slot->hotplug_slot->info->latch_status = acpiphp_get_latch_status(slot->acpi_slot);
slot->hotplug_slot->info->adapter_status = acpiphp_get_adapter_status(slot->acpi_slot);
- slot->hotplug_slot->info->max_bus_speed = PCI_SPEED_UNKNOWN;
- slot->hotplug_slot->info->cur_bus_speed = PCI_SPEED_UNKNOWN;
acpiphp_slot->slot = slot;
snprintf(name, SLOT_NAME_SIZE, "%llu", slot->acpi_slot->sun);
diff --git a/drivers/pci/hotplug/cpcihp_generic.c b/drivers/pci/hotplug/cpcihp_generic.c
index 148fb46..fb3f846 100644
--- a/drivers/pci/hotplug/cpcihp_generic.c
+++ b/drivers/pci/hotplug/cpcihp_generic.c
@@ -162,6 +162,7 @@
dev = pci_get_slot(bus, PCI_DEVFN(bridge_slot, 0));
if(!dev || dev->hdr_type != PCI_HEADER_TYPE_BRIDGE) {
err("Invalid bridge device %s", bridge);
+ pci_dev_put(dev);
return -EINVAL;
}
bus = dev->subordinate;
diff --git a/drivers/pci/hotplug/cpqphp.h b/drivers/pci/hotplug/cpqphp.h
index 9c6a9fd..d8ffc73 100644
--- a/drivers/pci/hotplug/cpqphp.h
+++ b/drivers/pci/hotplug/cpqphp.h
@@ -310,8 +310,6 @@
u8 first_slot;
u8 add_support;
u8 push_flag;
- enum pci_bus_speed speed;
- enum pci_bus_speed speed_capability;
u8 push_button; /* 0 = no pushbutton, 1 = pushbutton present */
u8 slot_switch_type; /* 0 = no switch, 1 = switch present */
u8 defeature_PHP; /* 0 = PHP not supported, 1 = PHP supported */
diff --git a/drivers/pci/hotplug/cpqphp_core.c b/drivers/pci/hotplug/cpqphp_core.c
index 075b4f4..f184d1d 100644
--- a/drivers/pci/hotplug/cpqphp_core.c
+++ b/drivers/pci/hotplug/cpqphp_core.c
@@ -583,30 +583,6 @@
return 0;
}
-static int get_max_bus_speed (struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value)
-{
- struct slot *slot = hotplug_slot->private;
- struct controller *ctrl = slot->ctrl;
-
- dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
-
- *value = ctrl->speed_capability;
-
- return 0;
-}
-
-static int get_cur_bus_speed (struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value)
-{
- struct slot *slot = hotplug_slot->private;
- struct controller *ctrl = slot->ctrl;
-
- dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
-
- *value = ctrl->speed;
-
- return 0;
-}
-
static struct hotplug_slot_ops cpqphp_hotplug_slot_ops = {
.set_attention_status = set_attention_status,
.enable_slot = process_SI,
@@ -616,8 +592,6 @@
.get_attention_status = get_attention_status,
.get_latch_status = get_latch_status,
.get_adapter_status = get_adapter_status,
- .get_max_bus_speed = get_max_bus_speed,
- .get_cur_bus_speed = get_cur_bus_speed,
};
#define SLOT_NAME_SIZE 10
@@ -629,6 +603,7 @@
struct slot *slot;
struct hotplug_slot *hotplug_slot;
struct hotplug_slot_info *hotplug_slot_info;
+ struct pci_bus *bus = ctrl->pci_bus;
u8 number_of_slots;
u8 slot_device;
u8 slot_number;
@@ -694,7 +669,7 @@
slot->capabilities |= PCISLOT_64_BIT_SUPPORTED;
if (is_slot66mhz(slot))
slot->capabilities |= PCISLOT_66_MHZ_SUPPORTED;
- if (ctrl->speed == PCI_SPEED_66MHz)
+ if (bus->cur_bus_speed == PCI_SPEED_66MHz)
slot->capabilities |= PCISLOT_66_MHZ_OPERATION;
ctrl_slot =
@@ -844,6 +819,7 @@
u32 rc;
struct controller *ctrl;
struct pci_func *func;
+ struct pci_bus *bus;
int err;
err = pci_enable_device(pdev);
@@ -852,6 +828,7 @@
pci_name(pdev), err);
return err;
}
+ bus = pdev->subordinate;
/* Need to read VID early b/c it's used to differentiate CPQ and INTC
* discovery
@@ -929,22 +906,22 @@
pci_read_config_byte(pdev, 0x41, &bus_cap);
if (bus_cap & 0x80) {
dbg("bus max supports 133MHz PCI-X\n");
- ctrl->speed_capability = PCI_SPEED_133MHz_PCIX;
+ bus->max_bus_speed = PCI_SPEED_133MHz_PCIX;
break;
}
if (bus_cap & 0x40) {
dbg("bus max supports 100MHz PCI-X\n");
- ctrl->speed_capability = PCI_SPEED_100MHz_PCIX;
+ bus->max_bus_speed = PCI_SPEED_100MHz_PCIX;
break;
}
if (bus_cap & 20) {
dbg("bus max supports 66MHz PCI-X\n");
- ctrl->speed_capability = PCI_SPEED_66MHz_PCIX;
+ bus->max_bus_speed = PCI_SPEED_66MHz_PCIX;
break;
}
if (bus_cap & 10) {
dbg("bus max supports 66MHz PCI\n");
- ctrl->speed_capability = PCI_SPEED_66MHz;
+ bus->max_bus_speed = PCI_SPEED_66MHz;
break;
}
@@ -955,7 +932,7 @@
case PCI_SUB_HPC_ID:
/* Original 6500/7000 implementation */
ctrl->slot_switch_type = 1;
- ctrl->speed_capability = PCI_SPEED_33MHz;
+ bus->max_bus_speed = PCI_SPEED_33MHz;
ctrl->push_button = 0;
ctrl->pci_config_space = 1;
ctrl->defeature_PHP = 1;
@@ -966,7 +943,7 @@
/* First Pushbutton implementation */
ctrl->push_flag = 1;
ctrl->slot_switch_type = 1;
- ctrl->speed_capability = PCI_SPEED_33MHz;
+ bus->max_bus_speed = PCI_SPEED_33MHz;
ctrl->push_button = 1;
ctrl->pci_config_space = 1;
ctrl->defeature_PHP = 1;
@@ -976,7 +953,7 @@
case PCI_SUB_HPC_ID_INTC:
/* Third party (6500/7000) */
ctrl->slot_switch_type = 1;
- ctrl->speed_capability = PCI_SPEED_33MHz;
+ bus->max_bus_speed = PCI_SPEED_33MHz;
ctrl->push_button = 0;
ctrl->pci_config_space = 1;
ctrl->defeature_PHP = 1;
@@ -987,7 +964,7 @@
/* First 66 Mhz implementation */
ctrl->push_flag = 1;
ctrl->slot_switch_type = 1;
- ctrl->speed_capability = PCI_SPEED_66MHz;
+ bus->max_bus_speed = PCI_SPEED_66MHz;
ctrl->push_button = 1;
ctrl->pci_config_space = 1;
ctrl->defeature_PHP = 1;
@@ -998,7 +975,7 @@
/* First PCI-X implementation, 100MHz */
ctrl->push_flag = 1;
ctrl->slot_switch_type = 1;
- ctrl->speed_capability = PCI_SPEED_100MHz_PCIX;
+ bus->max_bus_speed = PCI_SPEED_100MHz_PCIX;
ctrl->push_button = 1;
ctrl->pci_config_space = 1;
ctrl->defeature_PHP = 1;
@@ -1015,9 +992,9 @@
case PCI_VENDOR_ID_INTEL:
/* Check for speed capability (0=33, 1=66) */
if (subsystem_deviceid & 0x0001)
- ctrl->speed_capability = PCI_SPEED_66MHz;
+ bus->max_bus_speed = PCI_SPEED_66MHz;
else
- ctrl->speed_capability = PCI_SPEED_33MHz;
+ bus->max_bus_speed = PCI_SPEED_33MHz;
/* Check for push button */
if (subsystem_deviceid & 0x0002)
@@ -1079,7 +1056,7 @@
pdev->bus->number);
dbg("Hotplug controller capabilities:\n");
- dbg(" speed_capability %d\n", ctrl->speed_capability);
+ dbg(" speed_capability %d\n", bus->max_bus_speed);
dbg(" slot_switch_type %s\n", ctrl->slot_switch_type ?
"switch present" : "no switch");
dbg(" defeature_PHP %s\n", ctrl->defeature_PHP ?
@@ -1142,7 +1119,7 @@
}
/* Check for 66Mhz operation */
- ctrl->speed = get_controller_speed(ctrl);
+ bus->cur_bus_speed = get_controller_speed(ctrl);
/********************************************************
diff --git a/drivers/pci/hotplug/cpqphp_ctrl.c b/drivers/pci/hotplug/cpqphp_ctrl.c
index 0ff689a..e43908d 100644
--- a/drivers/pci/hotplug/cpqphp_ctrl.c
+++ b/drivers/pci/hotplug/cpqphp_ctrl.c
@@ -1130,12 +1130,13 @@
static u8 set_controller_speed(struct controller *ctrl, u8 adapter_speed, u8 hp_slot)
{
struct slot *slot;
+ struct pci_bus *bus = ctrl->pci_bus;
u8 reg;
u8 slot_power = readb(ctrl->hpc_reg + SLOT_POWER);
u16 reg16;
u32 leds = readl(ctrl->hpc_reg + LED_CONTROL);
- if (ctrl->speed == adapter_speed)
+ if (bus->cur_bus_speed == adapter_speed)
return 0;
/* We don't allow freq/mode changes if we find another adapter running
@@ -1152,7 +1153,7 @@
* lower speed/mode, we allow the new adapter to function at
* this rate if supported
*/
- if (ctrl->speed < adapter_speed)
+ if (bus->cur_bus_speed < adapter_speed)
return 0;
return 1;
@@ -1161,20 +1162,20 @@
/* If the controller doesn't support freq/mode changes and the
* controller is running at a higher mode, we bail
*/
- if ((ctrl->speed > adapter_speed) && (!ctrl->pcix_speed_capability))
+ if ((bus->cur_bus_speed > adapter_speed) && (!ctrl->pcix_speed_capability))
return 1;
/* But we allow the adapter to run at a lower rate if possible */
- if ((ctrl->speed < adapter_speed) && (!ctrl->pcix_speed_capability))
+ if ((bus->cur_bus_speed < adapter_speed) && (!ctrl->pcix_speed_capability))
return 0;
/* We try to set the max speed supported by both the adapter and
* controller
*/
- if (ctrl->speed_capability < adapter_speed) {
- if (ctrl->speed == ctrl->speed_capability)
+ if (bus->max_bus_speed < adapter_speed) {
+ if (bus->cur_bus_speed == bus->max_bus_speed)
return 0;
- adapter_speed = ctrl->speed_capability;
+ adapter_speed = bus->max_bus_speed;
}
writel(0x0L, ctrl->hpc_reg + LED_CONTROL);
@@ -1229,8 +1230,8 @@
pci_write_config_byte(ctrl->pci_dev, 0x43, reg);
/* Only if mode change...*/
- if (((ctrl->speed == PCI_SPEED_66MHz) && (adapter_speed == PCI_SPEED_66MHz_PCIX)) ||
- ((ctrl->speed == PCI_SPEED_66MHz_PCIX) && (adapter_speed == PCI_SPEED_66MHz)))
+ if (((bus->cur_bus_speed == PCI_SPEED_66MHz) && (adapter_speed == PCI_SPEED_66MHz_PCIX)) ||
+ ((bus->cur_bus_speed == PCI_SPEED_66MHz_PCIX) && (adapter_speed == PCI_SPEED_66MHz)))
set_SOGO(ctrl);
wait_for_ctrl_irq(ctrl);
@@ -1243,7 +1244,7 @@
set_SOGO(ctrl);
wait_for_ctrl_irq(ctrl);
- ctrl->speed = adapter_speed;
+ bus->cur_bus_speed = adapter_speed;
slot = cpqhp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
info("Successfully changed frequency/mode for adapter in slot %d\n",
@@ -1269,6 +1270,7 @@
*/
static u32 board_replaced(struct pci_func *func, struct controller *ctrl)
{
+ struct pci_bus *bus = ctrl->pci_bus;
u8 hp_slot;
u8 temp_byte;
u8 adapter_speed;
@@ -1309,7 +1311,7 @@
wait_for_ctrl_irq (ctrl);
adapter_speed = get_adapter_speed(ctrl, hp_slot);
- if (ctrl->speed != adapter_speed)
+ if (bus->cur_bus_speed != adapter_speed)
if (set_controller_speed(ctrl, adapter_speed, hp_slot))
rc = WRONG_BUS_FREQUENCY;
@@ -1426,6 +1428,7 @@
u32 temp_register = 0xFFFFFFFF;
u32 rc = 0;
struct pci_func *new_slot = NULL;
+ struct pci_bus *bus = ctrl->pci_bus;
struct slot *p_slot;
struct resource_lists res_lists;
@@ -1456,7 +1459,7 @@
wait_for_ctrl_irq (ctrl);
adapter_speed = get_adapter_speed(ctrl, hp_slot);
- if (ctrl->speed != adapter_speed)
+ if (bus->cur_bus_speed != adapter_speed)
if (set_controller_speed(ctrl, adapter_speed, hp_slot))
rc = WRONG_BUS_FREQUENCY;
diff --git a/drivers/pci/hotplug/ibmphp_core.c b/drivers/pci/hotplug/ibmphp_core.c
index 7485ffd..d934dd4 100644
--- a/drivers/pci/hotplug/ibmphp_core.c
+++ b/drivers/pci/hotplug/ibmphp_core.c
@@ -395,89 +395,40 @@
return rc;
}
-static int get_max_bus_speed(struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value)
+static int get_max_bus_speed(struct slot *slot)
{
- int rc = -ENODEV;
- struct slot *pslot;
+ int rc;
u8 mode = 0;
+ enum pci_bus_speed speed;
+ struct pci_bus *bus = slot->hotplug_slot->pci_slot->bus;
- debug("%s - Entry hotplug_slot[%p] pvalue[%p]\n", __func__,
- hotplug_slot, value);
+ debug("%s - Entry slot[%p]\n", __func__, slot);
ibmphp_lock_operations();
+ mode = slot->supported_bus_mode;
+ speed = slot->supported_speed;
+ ibmphp_unlock_operations();
- if (hotplug_slot) {
- pslot = hotplug_slot->private;
- if (pslot) {
- rc = 0;
- mode = pslot->supported_bus_mode;
- *value = pslot->supported_speed;
- switch (*value) {
- case BUS_SPEED_33:
- break;
- case BUS_SPEED_66:
- if (mode == BUS_MODE_PCIX)
- *value += 0x01;
- break;
- case BUS_SPEED_100:
- case BUS_SPEED_133:
- *value = pslot->supported_speed + 0x01;
- break;
- default:
- /* Note (will need to change): there would be soon 256, 512 also */
- rc = -ENODEV;
- }
- }
+ switch (speed) {
+ case BUS_SPEED_33:
+ break;
+ case BUS_SPEED_66:
+ if (mode == BUS_MODE_PCIX)
+ speed += 0x01;
+ break;
+ case BUS_SPEED_100:
+ case BUS_SPEED_133:
+ speed += 0x01;
+ break;
+ default:
+ /* Note (will need to change): there would be soon 256, 512 also */
+ rc = -ENODEV;
}
- ibmphp_unlock_operations();
- debug("%s - Exit rc[%d] value[%x]\n", __func__, rc, *value);
- return rc;
-}
+ if (!rc)
+ bus->max_bus_speed = speed;
-static int get_cur_bus_speed(struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value)
-{
- int rc = -ENODEV;
- struct slot *pslot;
- u8 mode = 0;
-
- debug("%s - Entry hotplug_slot[%p] pvalue[%p]\n", __func__,
- hotplug_slot, value);
-
- ibmphp_lock_operations();
-
- if (hotplug_slot) {
- pslot = hotplug_slot->private;
- if (pslot) {
- rc = get_cur_bus_info(&pslot);
- if (!rc) {
- mode = pslot->bus_on->current_bus_mode;
- *value = pslot->bus_on->current_speed;
- switch (*value) {
- case BUS_SPEED_33:
- break;
- case BUS_SPEED_66:
- if (mode == BUS_MODE_PCIX)
- *value += 0x01;
- else if (mode == BUS_MODE_PCI)
- ;
- else
- *value = PCI_SPEED_UNKNOWN;
- break;
- case BUS_SPEED_100:
- case BUS_SPEED_133:
- *value += 0x01;
- break;
- default:
- /* Note of change: there would also be 256, 512 soon */
- rc = -ENODEV;
- }
- }
- }
- }
-
- ibmphp_unlock_operations();
- debug("%s - Exit rc[%d] value[%x]\n", __func__, rc, *value);
+ debug("%s - Exit rc[%d] speed[%x]\n", __func__, rc, speed);
return rc;
}
@@ -572,6 +523,7 @@
if (slot_cur->bus_on->current_speed == 0xFF)
if (get_cur_bus_info(&slot_cur))
return -1;
+ get_max_bus_speed(slot_cur);
if (slot_cur->ctrl->options == 0xFF)
if (get_hpc_options(slot_cur, &slot_cur->ctrl->options))
@@ -655,6 +607,7 @@
int ibmphp_update_slot_info(struct slot *slot_cur)
{
struct hotplug_slot_info *info;
+ struct pci_bus *bus = slot_cur->hotplug_slot->pci_slot->bus;
int rc;
u8 bus_speed;
u8 mode;
@@ -700,8 +653,7 @@
bus_speed = PCI_SPEED_UNKNOWN;
}
- info->cur_bus_speed = bus_speed;
- info->max_bus_speed = slot_cur->hotplug_slot->info->max_bus_speed;
+ bus->cur_bus_speed = bus_speed;
// To do: bus_names
rc = pci_hp_change_slot_info(slot_cur->hotplug_slot, info);
@@ -1326,8 +1278,6 @@
.get_attention_status = get_attention_status,
.get_latch_status = get_latch_status,
.get_adapter_status = get_adapter_present,
- .get_max_bus_speed = get_max_bus_speed,
- .get_cur_bus_speed = get_cur_bus_speed,
/* .get_max_adapter_speed = get_max_adapter_speed,
.get_bus_name_status = get_bus_name,
*/
diff --git a/drivers/pci/hotplug/ibmphp_ebda.c b/drivers/pci/hotplug/ibmphp_ebda.c
index c1abac8..5becbdee 100644
--- a/drivers/pci/hotplug/ibmphp_ebda.c
+++ b/drivers/pci/hotplug/ibmphp_ebda.c
@@ -245,7 +245,7 @@
int __init ibmphp_access_ebda (void)
{
- u8 format, num_ctlrs, rio_complete, hs_complete;
+ u8 format, num_ctlrs, rio_complete, hs_complete, ebda_sz;
u16 ebda_seg, num_entries, next_offset, offset, blk_id, sub_addr, re, rc_id, re_id, base;
int rc = 0;
@@ -260,7 +260,16 @@
iounmap (io_mem);
debug ("returned ebda segment: %x\n", ebda_seg);
- io_mem = ioremap(ebda_seg<<4, 1024);
+ io_mem = ioremap(ebda_seg<<4, 1);
+ if (!io_mem)
+ return -ENOMEM;
+ ebda_sz = readb(io_mem);
+ iounmap(io_mem);
+ debug("ebda size: %d(KiB)\n", ebda_sz);
+ if (ebda_sz == 0)
+ return -ENOMEM;
+
+ io_mem = ioremap(ebda_seg<<4, (ebda_sz * 1024));
if (!io_mem )
return -ENOMEM;
next_offset = 0x180;
diff --git a/drivers/pci/hotplug/ibmphp_hpc.c b/drivers/pci/hotplug/ibmphp_hpc.c
index c7084f0..1aaf3f3 100644
--- a/drivers/pci/hotplug/ibmphp_hpc.c
+++ b/drivers/pci/hotplug/ibmphp_hpc.c
@@ -35,6 +35,7 @@
#include <linux/init.h>
#include <linux/mutex.h>
#include <linux/sched.h>
+#include <linux/semaphore.h>
#include <linux/kthread.h>
#include "ibmphp.h"
diff --git a/drivers/pci/hotplug/pci_hotplug_core.c b/drivers/pci/hotplug/pci_hotplug_core.c
index 38183a5..728b119 100644
--- a/drivers/pci/hotplug/pci_hotplug_core.c
+++ b/drivers/pci/hotplug/pci_hotplug_core.c
@@ -64,32 +64,6 @@
static LIST_HEAD(pci_hotplug_slot_list);
static DEFINE_MUTEX(pci_hp_mutex);
-/* these strings match up with the values in pci_bus_speed */
-static char *pci_bus_speed_strings[] = {
- "33 MHz PCI", /* 0x00 */
- "66 MHz PCI", /* 0x01 */
- "66 MHz PCI-X", /* 0x02 */
- "100 MHz PCI-X", /* 0x03 */
- "133 MHz PCI-X", /* 0x04 */
- NULL, /* 0x05 */
- NULL, /* 0x06 */
- NULL, /* 0x07 */
- NULL, /* 0x08 */
- "66 MHz PCI-X 266", /* 0x09 */
- "100 MHz PCI-X 266", /* 0x0a */
- "133 MHz PCI-X 266", /* 0x0b */
- NULL, /* 0x0c */
- NULL, /* 0x0d */
- NULL, /* 0x0e */
- NULL, /* 0x0f */
- NULL, /* 0x10 */
- "66 MHz PCI-X 533", /* 0x11 */
- "100 MHz PCI-X 533", /* 0x12 */
- "133 MHz PCI-X 533", /* 0x13 */
- "2.5 GT/s PCIe", /* 0x14 */
- "5.0 GT/s PCIe", /* 0x15 */
-};
-
#ifdef CONFIG_HOTPLUG_PCI_CPCI
extern int cpci_hotplug_init(int debug);
extern void cpci_hotplug_exit(void);
@@ -118,8 +92,6 @@
GET_STATUS(attention_status, u8)
GET_STATUS(latch_status, u8)
GET_STATUS(adapter_status, u8)
-GET_STATUS(max_bus_speed, enum pci_bus_speed)
-GET_STATUS(cur_bus_speed, enum pci_bus_speed)
static ssize_t power_read_file(struct pci_slot *slot, char *buf)
{
@@ -263,60 +235,6 @@
.show = presence_read_file,
};
-static char *unknown_speed = "Unknown bus speed";
-
-static ssize_t max_bus_speed_read_file(struct pci_slot *slot, char *buf)
-{
- char *speed_string;
- int retval;
- enum pci_bus_speed value;
-
- retval = get_max_bus_speed(slot->hotplug, &value);
- if (retval)
- goto exit;
-
- if (value == PCI_SPEED_UNKNOWN)
- speed_string = unknown_speed;
- else
- speed_string = pci_bus_speed_strings[value];
-
- retval = sprintf (buf, "%s\n", speed_string);
-
-exit:
- return retval;
-}
-
-static struct pci_slot_attribute hotplug_slot_attr_max_bus_speed = {
- .attr = {.name = "max_bus_speed", .mode = S_IFREG | S_IRUGO},
- .show = max_bus_speed_read_file,
-};
-
-static ssize_t cur_bus_speed_read_file(struct pci_slot *slot, char *buf)
-{
- char *speed_string;
- int retval;
- enum pci_bus_speed value;
-
- retval = get_cur_bus_speed(slot->hotplug, &value);
- if (retval)
- goto exit;
-
- if (value == PCI_SPEED_UNKNOWN)
- speed_string = unknown_speed;
- else
- speed_string = pci_bus_speed_strings[value];
-
- retval = sprintf (buf, "%s\n", speed_string);
-
-exit:
- return retval;
-}
-
-static struct pci_slot_attribute hotplug_slot_attr_cur_bus_speed = {
- .attr = {.name = "cur_bus_speed", .mode = S_IFREG | S_IRUGO},
- .show = cur_bus_speed_read_file,
-};
-
static ssize_t test_write_file(struct pci_slot *pci_slot, const char *buf,
size_t count)
{
@@ -391,26 +309,6 @@
return false;
}
-static bool has_max_bus_speed_file(struct pci_slot *pci_slot)
-{
- struct hotplug_slot *slot = pci_slot->hotplug;
- if ((!slot) || (!slot->ops))
- return false;
- if (slot->ops->get_max_bus_speed)
- return true;
- return false;
-}
-
-static bool has_cur_bus_speed_file(struct pci_slot *pci_slot)
-{
- struct hotplug_slot *slot = pci_slot->hotplug;
- if ((!slot) || (!slot->ops))
- return false;
- if (slot->ops->get_cur_bus_speed)
- return true;
- return false;
-}
-
static bool has_test_file(struct pci_slot *pci_slot)
{
struct hotplug_slot *slot = pci_slot->hotplug;
@@ -456,20 +354,6 @@
goto exit_adapter;
}
- if (has_max_bus_speed_file(slot)) {
- retval = sysfs_create_file(&slot->kobj,
- &hotplug_slot_attr_max_bus_speed.attr);
- if (retval)
- goto exit_max_speed;
- }
-
- if (has_cur_bus_speed_file(slot)) {
- retval = sysfs_create_file(&slot->kobj,
- &hotplug_slot_attr_cur_bus_speed.attr);
- if (retval)
- goto exit_cur_speed;
- }
-
if (has_test_file(slot)) {
retval = sysfs_create_file(&slot->kobj,
&hotplug_slot_attr_test.attr);
@@ -480,14 +364,6 @@
goto exit;
exit_test:
- if (has_cur_bus_speed_file(slot))
- sysfs_remove_file(&slot->kobj,
- &hotplug_slot_attr_cur_bus_speed.attr);
-exit_cur_speed:
- if (has_max_bus_speed_file(slot))
- sysfs_remove_file(&slot->kobj,
- &hotplug_slot_attr_max_bus_speed.attr);
-exit_max_speed:
if (has_adapter_file(slot))
sysfs_remove_file(&slot->kobj,
&hotplug_slot_attr_presence.attr);
@@ -523,14 +399,6 @@
sysfs_remove_file(&slot->kobj,
&hotplug_slot_attr_presence.attr);
- if (has_max_bus_speed_file(slot))
- sysfs_remove_file(&slot->kobj,
- &hotplug_slot_attr_max_bus_speed.attr);
-
- if (has_cur_bus_speed_file(slot))
- sysfs_remove_file(&slot->kobj,
- &hotplug_slot_attr_cur_bus_speed.attr);
-
if (has_test_file(slot))
sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_test.attr);
diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c
index 5674b20..920f820 100644
--- a/drivers/pci/hotplug/pciehp_core.c
+++ b/drivers/pci/hotplug/pciehp_core.c
@@ -69,8 +69,6 @@
static int get_attention_status (struct hotplug_slot *slot, u8 *value);
static int get_latch_status (struct hotplug_slot *slot, u8 *value);
static int get_adapter_status (struct hotplug_slot *slot, u8 *value);
-static int get_max_bus_speed (struct hotplug_slot *slot, enum pci_bus_speed *value);
-static int get_cur_bus_speed (struct hotplug_slot *slot, enum pci_bus_speed *value);
/**
* release_slot - free up the memory used by a slot
@@ -113,8 +111,6 @@
ops->disable_slot = disable_slot;
ops->get_power_status = get_power_status;
ops->get_adapter_status = get_adapter_status;
- ops->get_max_bus_speed = get_max_bus_speed;
- ops->get_cur_bus_speed = get_cur_bus_speed;
if (MRL_SENS(ctrl))
ops->get_latch_status = get_latch_status;
if (ATTN_LED(ctrl)) {
@@ -227,27 +223,6 @@
return pciehp_get_adapter_status(slot, value);
}
-static int get_max_bus_speed(struct hotplug_slot *hotplug_slot,
- enum pci_bus_speed *value)
-{
- struct slot *slot = hotplug_slot->private;
-
- ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n",
- __func__, slot_name(slot));
-
- return pciehp_get_max_link_speed(slot, value);
-}
-
-static int get_cur_bus_speed(struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value)
-{
- struct slot *slot = hotplug_slot->private;
-
- ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n",
- __func__, slot_name(slot));
-
- return pciehp_get_cur_link_speed(slot, value);
-}
-
static int pciehp_probe(struct pcie_device *dev)
{
int rc;
diff --git a/drivers/pci/hotplug/pciehp_ctrl.c b/drivers/pci/hotplug/pciehp_ctrl.c
index d6ac1b2..9a7f247 100644
--- a/drivers/pci/hotplug/pciehp_ctrl.c
+++ b/drivers/pci/hotplug/pciehp_ctrl.c
@@ -341,6 +341,7 @@
p_slot->state = POWERON_STATE;
break;
default:
+ kfree(info);
goto out;
}
queue_work(pciehp_wq, &info->work);
diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index 10040d5..40b48f5 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -492,6 +492,7 @@
u16 slot_cmd;
u16 cmd_mask;
u16 slot_status;
+ u16 lnk_status;
int retval = 0;
/* Clear sticky power-fault bit from previous power failures */
@@ -523,6 +524,14 @@
ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n", __func__,
pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL, slot_cmd);
+ retval = pciehp_readw(ctrl, PCI_EXP_LNKSTA, &lnk_status);
+ if (retval) {
+ ctrl_err(ctrl, "%s: Cannot read LNKSTA register\n",
+ __func__);
+ return retval;
+ }
+ pcie_update_link_speed(ctrl->pcie->port->subordinate, lnk_status);
+
return retval;
}
@@ -610,37 +619,6 @@
return IRQ_HANDLED;
}
-int pciehp_get_max_link_speed(struct slot *slot, enum pci_bus_speed *value)
-{
- struct controller *ctrl = slot->ctrl;
- enum pcie_link_speed lnk_speed;
- u32 lnk_cap;
- int retval = 0;
-
- retval = pciehp_readl(ctrl, PCI_EXP_LNKCAP, &lnk_cap);
- if (retval) {
- ctrl_err(ctrl, "%s: Cannot read LNKCAP register\n", __func__);
- return retval;
- }
-
- switch (lnk_cap & 0x000F) {
- case 1:
- lnk_speed = PCIE_2_5GB;
- break;
- case 2:
- lnk_speed = PCIE_5_0GB;
- break;
- default:
- lnk_speed = PCIE_LNK_SPEED_UNKNOWN;
- break;
- }
-
- *value = lnk_speed;
- ctrl_dbg(ctrl, "Max link speed = %d\n", lnk_speed);
-
- return retval;
-}
-
int pciehp_get_max_lnk_width(struct slot *slot,
enum pcie_link_width *value)
{
@@ -691,38 +669,6 @@
return retval;
}
-int pciehp_get_cur_link_speed(struct slot *slot, enum pci_bus_speed *value)
-{
- struct controller *ctrl = slot->ctrl;
- enum pcie_link_speed lnk_speed = PCI_SPEED_UNKNOWN;
- int retval = 0;
- u16 lnk_status;
-
- retval = pciehp_readw(ctrl, PCI_EXP_LNKSTA, &lnk_status);
- if (retval) {
- ctrl_err(ctrl, "%s: Cannot read LNKSTATUS register\n",
- __func__);
- return retval;
- }
-
- switch (lnk_status & PCI_EXP_LNKSTA_CLS) {
- case 1:
- lnk_speed = PCIE_2_5GB;
- break;
- case 2:
- lnk_speed = PCIE_5_0GB;
- break;
- default:
- lnk_speed = PCIE_LNK_SPEED_UNKNOWN;
- break;
- }
-
- *value = lnk_speed;
- ctrl_dbg(ctrl, "Current link speed = %d\n", lnk_speed);
-
- return retval;
-}
-
int pciehp_get_cur_lnk_width(struct slot *slot,
enum pcie_link_width *value)
{
diff --git a/drivers/pci/hotplug/pciehp_pci.c b/drivers/pci/hotplug/pciehp_pci.c
index 2173310..0a16444 100644
--- a/drivers/pci/hotplug/pciehp_pci.c
+++ b/drivers/pci/hotplug/pciehp_pci.c
@@ -53,17 +53,15 @@
busnr = pci_scan_bridge(parent, dev, busnr, pass);
if (!dev->subordinate)
return -1;
- pci_bus_size_bridges(dev->subordinate);
- pci_bus_assign_resources(parent);
- pci_enable_bridges(parent);
- pci_bus_add_devices(parent);
+
return 0;
}
int pciehp_configure_device(struct slot *p_slot)
{
struct pci_dev *dev;
- struct pci_bus *parent = p_slot->ctrl->pcie->port->subordinate;
+ struct pci_dev *bridge = p_slot->ctrl->pcie->port;
+ struct pci_bus *parent = bridge->subordinate;
int num, fn;
struct controller *ctrl = p_slot->ctrl;
@@ -96,12 +94,25 @@
(dev->hdr_type == PCI_HEADER_TYPE_CARDBUS)) {
pciehp_add_bridge(dev);
}
+ pci_dev_put(dev);
+ }
+
+ pci_assign_unassigned_bridge_resources(bridge);
+
+ for (fn = 0; fn < 8; fn++) {
+ dev = pci_get_slot(parent, PCI_DEVFN(0, fn));
+ if (!dev)
+ continue;
+ if ((dev->class >> 16) == PCI_BASE_CLASS_DISPLAY) {
+ pci_dev_put(dev);
+ continue;
+ }
pci_configure_slot(dev);
pci_dev_put(dev);
}
- pci_bus_assign_resources(parent);
pci_bus_add_devices(parent);
+
return 0;
}
diff --git a/drivers/pci/hotplug/rpaphp_core.c b/drivers/pci/hotplug/rpaphp_core.c
index c159223..dcaae72 100644
--- a/drivers/pci/hotplug/rpaphp_core.c
+++ b/drivers/pci/hotplug/rpaphp_core.c
@@ -130,10 +130,9 @@
return 0;
}
-static int get_max_bus_speed(struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value)
+static enum pci_bus_speed get_max_bus_speed(struct slot *slot)
{
- struct slot *slot = (struct slot *)hotplug_slot->private;
-
+ enum pci_bus_speed speed;
switch (slot->type) {
case 1:
case 2:
@@ -141,30 +140,30 @@
case 4:
case 5:
case 6:
- *value = PCI_SPEED_33MHz; /* speed for case 1-6 */
+ speed = PCI_SPEED_33MHz; /* speed for case 1-6 */
break;
case 7:
case 8:
- *value = PCI_SPEED_66MHz;
+ speed = PCI_SPEED_66MHz;
break;
case 11:
case 14:
- *value = PCI_SPEED_66MHz_PCIX;
+ speed = PCI_SPEED_66MHz_PCIX;
break;
case 12:
case 15:
- *value = PCI_SPEED_100MHz_PCIX;
+ speed = PCI_SPEED_100MHz_PCIX;
break;
case 13:
case 16:
- *value = PCI_SPEED_133MHz_PCIX;
+ speed = PCI_SPEED_133MHz_PCIX;
break;
default:
- *value = PCI_SPEED_UNKNOWN;
+ speed = PCI_SPEED_UNKNOWN;
break;
-
}
- return 0;
+
+ return speed;
}
static int get_children_props(struct device_node *dn, const int **drc_indexes,
@@ -408,6 +407,8 @@
slot->state = NOT_VALID;
return -EINVAL;
}
+
+ slot->bus->max_bus_speed = get_max_bus_speed(slot);
return 0;
}
@@ -429,7 +430,6 @@
.get_power_status = get_power_status,
.get_attention_status = get_attention_status,
.get_adapter_status = get_adapter_status,
- .get_max_bus_speed = get_max_bus_speed,
};
module_init(rpaphp_init);
diff --git a/drivers/pci/hotplug/shpchp.h b/drivers/pci/hotplug/shpchp.h
index 8e210cd7..d2627e1 100644
--- a/drivers/pci/hotplug/shpchp.h
+++ b/drivers/pci/hotplug/shpchp.h
@@ -333,8 +333,6 @@
int (*set_attention_status)(struct slot *slot, u8 status);
int (*get_latch_status)(struct slot *slot, u8 *status);
int (*get_adapter_status)(struct slot *slot, u8 *status);
- int (*get_max_bus_speed)(struct slot *slot, enum pci_bus_speed *speed);
- int (*get_cur_bus_speed)(struct slot *slot, enum pci_bus_speed *speed);
int (*get_adapter_speed)(struct slot *slot, enum pci_bus_speed *speed);
int (*get_mode1_ECC_cap)(struct slot *slot, u8 *mode);
int (*get_prog_int)(struct slot *slot, u8 *prog_int);
diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c
index 8a520a3..a506229 100644
--- a/drivers/pci/hotplug/shpchp_core.c
+++ b/drivers/pci/hotplug/shpchp_core.c
@@ -65,8 +65,6 @@
static int get_attention_status (struct hotplug_slot *slot, u8 *value);
static int get_latch_status (struct hotplug_slot *slot, u8 *value);
static int get_adapter_status (struct hotplug_slot *slot, u8 *value);
-static int get_max_bus_speed (struct hotplug_slot *slot, enum pci_bus_speed *value);
-static int get_cur_bus_speed (struct hotplug_slot *slot, enum pci_bus_speed *value);
static struct hotplug_slot_ops shpchp_hotplug_slot_ops = {
.set_attention_status = set_attention_status,
@@ -76,8 +74,6 @@
.get_attention_status = get_attention_status,
.get_latch_status = get_latch_status,
.get_adapter_status = get_adapter_status,
- .get_max_bus_speed = get_max_bus_speed,
- .get_cur_bus_speed = get_cur_bus_speed,
};
/**
@@ -279,37 +275,6 @@
return 0;
}
-static int get_max_bus_speed(struct hotplug_slot *hotplug_slot,
- enum pci_bus_speed *value)
-{
- struct slot *slot = get_slot(hotplug_slot);
- int retval;
-
- ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n",
- __func__, slot_name(slot));
-
- retval = slot->hpc_ops->get_max_bus_speed(slot, value);
- if (retval < 0)
- *value = PCI_SPEED_UNKNOWN;
-
- return 0;
-}
-
-static int get_cur_bus_speed (struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value)
-{
- struct slot *slot = get_slot(hotplug_slot);
- int retval;
-
- ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n",
- __func__, slot_name(slot));
-
- retval = slot->hpc_ops->get_cur_bus_speed(slot, value);
- if (retval < 0)
- *value = PCI_SPEED_UNKNOWN;
-
- return 0;
-}
-
static int is_shpc_capable(struct pci_dev *dev)
{
if ((dev->vendor == PCI_VENDOR_ID_AMD) || (dev->device ==
diff --git a/drivers/pci/hotplug/shpchp_ctrl.c b/drivers/pci/hotplug/shpchp_ctrl.c
index b8ab279..3bba0c0 100644
--- a/drivers/pci/hotplug/shpchp_ctrl.c
+++ b/drivers/pci/hotplug/shpchp_ctrl.c
@@ -285,17 +285,8 @@
return WRONG_BUS_FREQUENCY;
}
- rc = p_slot->hpc_ops->get_cur_bus_speed(p_slot, &bsp);
- if (rc) {
- ctrl_err(ctrl, "Can't get bus operation speed\n");
- return WRONG_BUS_FREQUENCY;
- }
-
- rc = p_slot->hpc_ops->get_max_bus_speed(p_slot, &msp);
- if (rc) {
- ctrl_err(ctrl, "Can't get max bus operation speed\n");
- msp = bsp;
- }
+ bsp = ctrl->pci_dev->bus->cur_bus_speed;
+ msp = ctrl->pci_dev->bus->max_bus_speed;
/* Check if there are other slots or devices on the same bus */
if (!list_empty(&ctrl->pci_dev->subordinate->devices))
@@ -462,6 +453,7 @@
p_slot->state = POWERON_STATE;
break;
default:
+ kfree(info);
goto out;
}
queue_work(shpchp_wq, &info->work);
diff --git a/drivers/pci/hotplug/shpchp_hpc.c b/drivers/pci/hotplug/shpchp_hpc.c
index 86dc398..5f5e8d2 100644
--- a/drivers/pci/hotplug/shpchp_hpc.c
+++ b/drivers/pci/hotplug/shpchp_hpc.c
@@ -660,6 +660,75 @@
return retval;
}
+static int shpc_get_cur_bus_speed(struct controller *ctrl)
+{
+ int retval = 0;
+ struct pci_bus *bus = ctrl->pci_dev->subordinate;
+ enum pci_bus_speed bus_speed = PCI_SPEED_UNKNOWN;
+ u16 sec_bus_reg = shpc_readw(ctrl, SEC_BUS_CONFIG);
+ u8 pi = shpc_readb(ctrl, PROG_INTERFACE);
+ u8 speed_mode = (pi == 2) ? (sec_bus_reg & 0xF) : (sec_bus_reg & 0x7);
+
+ if ((pi == 1) && (speed_mode > 4)) {
+ retval = -ENODEV;
+ goto out;
+ }
+
+ switch (speed_mode) {
+ case 0x0:
+ bus_speed = PCI_SPEED_33MHz;
+ break;
+ case 0x1:
+ bus_speed = PCI_SPEED_66MHz;
+ break;
+ case 0x2:
+ bus_speed = PCI_SPEED_66MHz_PCIX;
+ break;
+ case 0x3:
+ bus_speed = PCI_SPEED_100MHz_PCIX;
+ break;
+ case 0x4:
+ bus_speed = PCI_SPEED_133MHz_PCIX;
+ break;
+ case 0x5:
+ bus_speed = PCI_SPEED_66MHz_PCIX_ECC;
+ break;
+ case 0x6:
+ bus_speed = PCI_SPEED_100MHz_PCIX_ECC;
+ break;
+ case 0x7:
+ bus_speed = PCI_SPEED_133MHz_PCIX_ECC;
+ break;
+ case 0x8:
+ bus_speed = PCI_SPEED_66MHz_PCIX_266;
+ break;
+ case 0x9:
+ bus_speed = PCI_SPEED_100MHz_PCIX_266;
+ break;
+ case 0xa:
+ bus_speed = PCI_SPEED_133MHz_PCIX_266;
+ break;
+ case 0xb:
+ bus_speed = PCI_SPEED_66MHz_PCIX_533;
+ break;
+ case 0xc:
+ bus_speed = PCI_SPEED_100MHz_PCIX_533;
+ break;
+ case 0xd:
+ bus_speed = PCI_SPEED_133MHz_PCIX_533;
+ break;
+ default:
+ retval = -ENODEV;
+ break;
+ }
+
+ out:
+ bus->cur_bus_speed = bus_speed;
+ dbg("Current bus speed = %d\n", bus_speed);
+ return retval;
+}
+
+
static int hpc_set_bus_speed_mode(struct slot * slot, enum pci_bus_speed value)
{
int retval;
@@ -720,6 +789,8 @@
retval = shpc_write_cmd(slot, 0, cmd);
if (retval)
ctrl_err(ctrl, "%s: Write command failed!\n", __func__);
+ else
+ shpc_get_cur_bus_speed(ctrl);
return retval;
}
@@ -803,10 +874,10 @@
return IRQ_HANDLED;
}
-static int hpc_get_max_bus_speed (struct slot *slot, enum pci_bus_speed *value)
+static int shpc_get_max_bus_speed(struct controller *ctrl)
{
int retval = 0;
- struct controller *ctrl = slot->ctrl;
+ struct pci_bus *bus = ctrl->pci_dev->subordinate;
enum pci_bus_speed bus_speed = PCI_SPEED_UNKNOWN;
u8 pi = shpc_readb(ctrl, PROG_INTERFACE);
u32 slot_avail1 = shpc_readl(ctrl, SLOT_AVAIL1);
@@ -842,79 +913,12 @@
retval = -ENODEV;
}
- *value = bus_speed;
+ bus->max_bus_speed = bus_speed;
ctrl_dbg(ctrl, "Max bus speed = %d\n", bus_speed);
return retval;
}
-static int hpc_get_cur_bus_speed (struct slot *slot, enum pci_bus_speed *value)
-{
- int retval = 0;
- struct controller *ctrl = slot->ctrl;
- enum pci_bus_speed bus_speed = PCI_SPEED_UNKNOWN;
- u16 sec_bus_reg = shpc_readw(ctrl, SEC_BUS_CONFIG);
- u8 pi = shpc_readb(ctrl, PROG_INTERFACE);
- u8 speed_mode = (pi == 2) ? (sec_bus_reg & 0xF) : (sec_bus_reg & 0x7);
-
- if ((pi == 1) && (speed_mode > 4)) {
- *value = PCI_SPEED_UNKNOWN;
- return -ENODEV;
- }
-
- switch (speed_mode) {
- case 0x0:
- *value = PCI_SPEED_33MHz;
- break;
- case 0x1:
- *value = PCI_SPEED_66MHz;
- break;
- case 0x2:
- *value = PCI_SPEED_66MHz_PCIX;
- break;
- case 0x3:
- *value = PCI_SPEED_100MHz_PCIX;
- break;
- case 0x4:
- *value = PCI_SPEED_133MHz_PCIX;
- break;
- case 0x5:
- *value = PCI_SPEED_66MHz_PCIX_ECC;
- break;
- case 0x6:
- *value = PCI_SPEED_100MHz_PCIX_ECC;
- break;
- case 0x7:
- *value = PCI_SPEED_133MHz_PCIX_ECC;
- break;
- case 0x8:
- *value = PCI_SPEED_66MHz_PCIX_266;
- break;
- case 0x9:
- *value = PCI_SPEED_100MHz_PCIX_266;
- break;
- case 0xa:
- *value = PCI_SPEED_133MHz_PCIX_266;
- break;
- case 0xb:
- *value = PCI_SPEED_66MHz_PCIX_533;
- break;
- case 0xc:
- *value = PCI_SPEED_100MHz_PCIX_533;
- break;
- case 0xd:
- *value = PCI_SPEED_133MHz_PCIX_533;
- break;
- default:
- *value = PCI_SPEED_UNKNOWN;
- retval = -ENODEV;
- break;
- }
-
- ctrl_dbg(ctrl, "Current bus speed = %d\n", bus_speed);
- return retval;
-}
-
static struct hpc_ops shpchp_hpc_ops = {
.power_on_slot = hpc_power_on_slot,
.slot_enable = hpc_slot_enable,
@@ -926,8 +930,6 @@
.get_latch_status = hpc_get_latch_status,
.get_adapter_status = hpc_get_adapter_status,
- .get_max_bus_speed = hpc_get_max_bus_speed,
- .get_cur_bus_speed = hpc_get_cur_bus_speed,
.get_adapter_speed = hpc_get_adapter_speed,
.get_mode1_ECC_cap = hpc_get_mode1_ECC_cap,
.get_prog_int = hpc_get_prog_int,
@@ -1086,6 +1088,9 @@
}
ctrl_dbg(ctrl, "HPC at %s irq=%x\n", pci_name(pdev), pdev->irq);
+ shpc_get_max_bus_speed(ctrl);
+ shpc_get_cur_bus_speed(ctrl);
+
/*
* If this is the first controller to be initialized,
* initialize the shpchpd work queue
diff --git a/drivers/pci/hotplug/shpchp_sysfs.c b/drivers/pci/hotplug/shpchp_sysfs.c
index 29fa9d2..071b7dc 100644
--- a/drivers/pci/hotplug/shpchp_sysfs.c
+++ b/drivers/pci/hotplug/shpchp_sysfs.c
@@ -47,8 +47,7 @@
bus = pdev->subordinate;
out += sprintf(buf, "Free resources: memory\n");
- for (index = 0; index < PCI_BUS_NUM_RESOURCES; index++) {
- res = bus->resource[index];
+ pci_bus_for_each_resource(bus, res, index) {
if (res && (res->flags & IORESOURCE_MEM) &&
!(res->flags & IORESOURCE_PREFETCH)) {
out += sprintf(out, "start = %8.8llx, "
@@ -58,8 +57,7 @@
}
}
out += sprintf(out, "Free resources: prefetchable memory\n");
- for (index = 0; index < PCI_BUS_NUM_RESOURCES; index++) {
- res = bus->resource[index];
+ pci_bus_for_each_resource(bus, res, index) {
if (res && (res->flags & IORESOURCE_MEM) &&
(res->flags & IORESOURCE_PREFETCH)) {
out += sprintf(out, "start = %8.8llx, "
@@ -69,8 +67,7 @@
}
}
out += sprintf(out, "Free resources: IO\n");
- for (index = 0; index < PCI_BUS_NUM_RESOURCES; index++) {
- res = bus->resource[index];
+ pci_bus_for_each_resource(bus, res, index) {
if (res && (res->flags & IORESOURCE_IO)) {
out += sprintf(out, "start = %8.8llx, "
"length = %8.8llx\n",
diff --git a/drivers/pci/legacy.c b/drivers/pci/legacy.c
deleted file mode 100644
index 871f65c..0000000
--- a/drivers/pci/legacy.c
+++ /dev/null
@@ -1,34 +0,0 @@
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include "pci.h"
-
-/**
- * pci_find_device - begin or continue searching for a PCI device by vendor/device id
- * @vendor: PCI vendor id to match, or %PCI_ANY_ID to match all vendor ids
- * @device: PCI device id to match, or %PCI_ANY_ID to match all device ids
- * @from: Previous PCI device found in search, or %NULL for new search.
- *
- * Iterates through the list of known PCI devices. If a PCI device is found
- * with a matching @vendor and @device, a pointer to its device structure is
- * returned. Otherwise, %NULL is returned.
- * A new search is initiated by passing %NULL as the @from argument.
- * Otherwise if @from is not %NULL, searches continue from next device
- * on the global list.
- *
- * NOTE: Do not use this function any more; use pci_get_device() instead, as
- * the PCI device returned by this function can disappear at any moment in
- * time.
- */
-struct pci_dev *pci_find_device(unsigned int vendor, unsigned int device,
- struct pci_dev *from)
-{
- struct pci_dev *pdev;
-
- pci_dev_get(from);
- pdev = pci_get_subsys(vendor, device, PCI_ANY_ID, PCI_ANY_ID, from);
- pci_dev_put(pdev);
- return pdev;
-}
-EXPORT_SYMBOL(pci_find_device);
diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
index 7e28295..c0c7391 100644
--- a/drivers/pci/pci-acpi.c
+++ b/drivers/pci/pci-acpi.c
@@ -16,8 +16,144 @@
#include <acpi/acpi_bus.h>
#include <linux/pci-acpi.h>
+#include <linux/pm_runtime.h>
#include "pci.h"
+static DEFINE_MUTEX(pci_acpi_pm_notify_mtx);
+
+/**
+ * pci_acpi_wake_bus - Wake-up notification handler for root buses.
+ * @handle: ACPI handle of a device the notification is for.
+ * @event: Type of the signaled event.
+ * @context: PCI root bus to wake up devices on.
+ */
+static void pci_acpi_wake_bus(acpi_handle handle, u32 event, void *context)
+{
+ struct pci_bus *pci_bus = context;
+
+ if (event == ACPI_NOTIFY_DEVICE_WAKE && pci_bus)
+ pci_pme_wakeup_bus(pci_bus);
+}
+
+/**
+ * pci_acpi_wake_dev - Wake-up notification handler for PCI devices.
+ * @handle: ACPI handle of a device the notification is for.
+ * @event: Type of the signaled event.
+ * @context: PCI device object to wake up.
+ */
+static void pci_acpi_wake_dev(acpi_handle handle, u32 event, void *context)
+{
+ struct pci_dev *pci_dev = context;
+
+ if (event == ACPI_NOTIFY_DEVICE_WAKE && pci_dev) {
+ pci_check_pme_status(pci_dev);
+ pm_runtime_resume(&pci_dev->dev);
+ if (pci_dev->subordinate)
+ pci_pme_wakeup_bus(pci_dev->subordinate);
+ }
+}
+
+/**
+ * add_pm_notifier - Register PM notifier for given ACPI device.
+ * @dev: ACPI device to add the notifier for.
+ * @context: PCI device or bus to check for PME status if an event is signaled.
+ *
+ * NOTE: @dev need not be a run-wake or wake-up device to be a valid source of
+ * PM wake-up events. For example, wake-up events may be generated for bridges
+ * if one of the devices below the bridge is signaling PME, even if the bridge
+ * itself doesn't have a wake-up GPE associated with it.
+ */
+static acpi_status add_pm_notifier(struct acpi_device *dev,
+ acpi_notify_handler handler,
+ void *context)
+{
+ acpi_status status = AE_ALREADY_EXISTS;
+
+ mutex_lock(&pci_acpi_pm_notify_mtx);
+
+ if (dev->wakeup.flags.notifier_present)
+ goto out;
+
+ status = acpi_install_notify_handler(dev->handle,
+ ACPI_SYSTEM_NOTIFY,
+ handler, context);
+ if (ACPI_FAILURE(status))
+ goto out;
+
+ dev->wakeup.flags.notifier_present = true;
+
+ out:
+ mutex_unlock(&pci_acpi_pm_notify_mtx);
+ return status;
+}
+
+/**
+ * remove_pm_notifier - Unregister PM notifier from given ACPI device.
+ * @dev: ACPI device to remove the notifier from.
+ */
+static acpi_status remove_pm_notifier(struct acpi_device *dev,
+ acpi_notify_handler handler)
+{
+ acpi_status status = AE_BAD_PARAMETER;
+
+ mutex_lock(&pci_acpi_pm_notify_mtx);
+
+ if (!dev->wakeup.flags.notifier_present)
+ goto out;
+
+ status = acpi_remove_notify_handler(dev->handle,
+ ACPI_SYSTEM_NOTIFY,
+ handler);
+ if (ACPI_FAILURE(status))
+ goto out;
+
+ dev->wakeup.flags.notifier_present = false;
+
+ out:
+ mutex_unlock(&pci_acpi_pm_notify_mtx);
+ return status;
+}
+
+/**
+ * pci_acpi_add_bus_pm_notifier - Register PM notifier for given PCI bus.
+ * @dev: ACPI device to add the notifier for.
+ * @pci_bus: PCI bus to walk checking for PME status if an event is signaled.
+ */
+acpi_status pci_acpi_add_bus_pm_notifier(struct acpi_device *dev,
+ struct pci_bus *pci_bus)
+{
+ return add_pm_notifier(dev, pci_acpi_wake_bus, pci_bus);
+}
+
+/**
+ * pci_acpi_remove_bus_pm_notifier - Unregister PCI bus PM notifier.
+ * @dev: ACPI device to remove the notifier from.
+ */
+acpi_status pci_acpi_remove_bus_pm_notifier(struct acpi_device *dev)
+{
+ return remove_pm_notifier(dev, pci_acpi_wake_bus);
+}
+
+/**
+ * pci_acpi_add_pm_notifier - Register PM notifier for given PCI device.
+ * @dev: ACPI device to add the notifier for.
+ * @pci_dev: PCI device to check for the PME status if an event is signaled.
+ */
+acpi_status pci_acpi_add_pm_notifier(struct acpi_device *dev,
+ struct pci_dev *pci_dev)
+{
+ return add_pm_notifier(dev, pci_acpi_wake_dev, pci_dev);
+}
+
+/**
+ * pci_acpi_remove_pm_notifier - Unregister PCI device PM notifier.
+ * @dev: ACPI device to remove the notifier from.
+ */
+acpi_status pci_acpi_remove_pm_notifier(struct acpi_device *dev)
+{
+ return remove_pm_notifier(dev, pci_acpi_wake_dev);
+}
+
/*
* _SxD returns the D-state with the highest power
* (lowest D-state number) supported in the S-state "x".
@@ -131,12 +267,87 @@
return 0;
}
+/**
+ * acpi_dev_run_wake - Enable/disable wake-up for given device.
+ * @phys_dev: Device to enable/disable the platform to wake-up the system for.
+ * @enable: Whether enable or disable the wake-up functionality.
+ *
+ * Find the ACPI device object corresponding to @pci_dev and try to
+ * enable/disable the GPE associated with it.
+ */
+static int acpi_dev_run_wake(struct device *phys_dev, bool enable)
+{
+ struct acpi_device *dev;
+ acpi_handle handle;
+ int error = -ENODEV;
+
+ if (!device_run_wake(phys_dev))
+ return -EINVAL;
+
+ handle = DEVICE_ACPI_HANDLE(phys_dev);
+ if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &dev))) {
+ dev_dbg(phys_dev, "ACPI handle has no context in %s!\n",
+ __func__);
+ return -ENODEV;
+ }
+
+ if (enable) {
+ if (!dev->wakeup.run_wake_count++) {
+ acpi_enable_wakeup_device_power(dev, ACPI_STATE_S0);
+ acpi_enable_gpe(dev->wakeup.gpe_device,
+ dev->wakeup.gpe_number,
+ ACPI_GPE_TYPE_RUNTIME);
+ }
+ } else if (dev->wakeup.run_wake_count > 0) {
+ if (!--dev->wakeup.run_wake_count) {
+ acpi_disable_gpe(dev->wakeup.gpe_device,
+ dev->wakeup.gpe_number,
+ ACPI_GPE_TYPE_RUNTIME);
+ acpi_disable_wakeup_device_power(dev);
+ }
+ } else {
+ error = -EALREADY;
+ }
+
+ return error;
+}
+
+static void acpi_pci_propagate_run_wake(struct pci_bus *bus, bool enable)
+{
+ while (bus->parent) {
+ struct pci_dev *bridge = bus->self;
+
+ if (bridge->pme_interrupt)
+ return;
+ if (!acpi_dev_run_wake(&bridge->dev, enable))
+ return;
+ bus = bus->parent;
+ }
+
+ /* We have reached the root bus. */
+ if (bus->bridge)
+ acpi_dev_run_wake(bus->bridge, enable);
+}
+
+static int acpi_pci_run_wake(struct pci_dev *dev, bool enable)
+{
+ if (dev->pme_interrupt)
+ return 0;
+
+ if (!acpi_dev_run_wake(&dev->dev, enable))
+ return 0;
+
+ acpi_pci_propagate_run_wake(dev->bus, enable);
+ return 0;
+}
+
static struct pci_platform_pm_ops acpi_pci_platform_pm = {
.is_manageable = acpi_pci_power_manageable,
.set_state = acpi_pci_set_power_state,
.choose_state = acpi_pci_choose_state,
.can_wakeup = acpi_pci_can_wakeup,
.sleep_wake = acpi_pci_sleep_wake,
+ .run_wake = acpi_pci_run_wake,
};
/* ACPI bus type */
diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index e5d47be..f9a0aec 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -17,6 +17,7 @@
#include <linux/slab.h>
#include <linux/sched.h>
#include <linux/cpu.h>
+#include <linux/pm_runtime.h>
#include "pci.h"
struct pci_dynid {
@@ -404,6 +405,35 @@
pci_msix_shutdown(pci_dev);
}
+#ifdef CONFIG_PM_OPS
+
+/* Auxiliary functions used for system resume and run-time resume. */
+
+/**
+ * pci_restore_standard_config - restore standard config registers of PCI device
+ * @pci_dev: PCI device to handle
+ */
+static int pci_restore_standard_config(struct pci_dev *pci_dev)
+{
+ pci_update_current_state(pci_dev, PCI_UNKNOWN);
+
+ if (pci_dev->current_state != PCI_D0) {
+ int error = pci_set_power_state(pci_dev, PCI_D0);
+ if (error)
+ return error;
+ }
+
+ return pci_restore_state(pci_dev);
+}
+
+static void pci_pm_default_resume_early(struct pci_dev *pci_dev)
+{
+ pci_restore_standard_config(pci_dev);
+ pci_fixup_device(pci_fixup_resume_early, pci_dev);
+}
+
+#endif
+
#ifdef CONFIG_PM_SLEEP
/*
@@ -520,29 +550,6 @@
/* Auxiliary functions used by the new power management framework */
-/**
- * pci_restore_standard_config - restore standard config registers of PCI device
- * @pci_dev: PCI device to handle
- */
-static int pci_restore_standard_config(struct pci_dev *pci_dev)
-{
- pci_update_current_state(pci_dev, PCI_UNKNOWN);
-
- if (pci_dev->current_state != PCI_D0) {
- int error = pci_set_power_state(pci_dev, PCI_D0);
- if (error)
- return error;
- }
-
- return pci_restore_state(pci_dev);
-}
-
-static void pci_pm_default_resume_noirq(struct pci_dev *pci_dev)
-{
- pci_restore_standard_config(pci_dev);
- pci_fixup_device(pci_fixup_resume_early, pci_dev);
-}
-
static void pci_pm_default_resume(struct pci_dev *pci_dev)
{
pci_fixup_device(pci_fixup_resume, pci_dev);
@@ -581,6 +588,17 @@
struct device_driver *drv = dev->driver;
int error = 0;
+ /*
+ * PCI devices suspended at run time need to be resumed at this
+ * point, because in general it is necessary to reconfigure them for
+ * system suspend. Namely, if the device is supposed to wake up the
+ * system from the sleep state, we may need to reconfigure it for this
+ * purpose. In turn, if the device is not supposed to wake up the
+ * system from the sleep state, we'll have to prevent it from signaling
+ * wake-up.
+ */
+ pm_runtime_resume(dev);
+
if (drv && drv->pm && drv->pm->prepare)
error = drv->pm->prepare(dev);
@@ -595,6 +613,13 @@
drv->pm->complete(dev);
}
+#else /* !CONFIG_PM_SLEEP */
+
+#define pci_pm_prepare NULL
+#define pci_pm_complete NULL
+
+#endif /* !CONFIG_PM_SLEEP */
+
#ifdef CONFIG_SUSPEND
static int pci_pm_suspend(struct device *dev)
@@ -681,7 +706,7 @@
struct device_driver *drv = dev->driver;
int error = 0;
- pci_pm_default_resume_noirq(pci_dev);
+ pci_pm_default_resume_early(pci_dev);
if (pci_has_legacy_pm_support(pci_dev))
return pci_legacy_resume_early(dev);
@@ -879,7 +904,7 @@
struct device_driver *drv = dev->driver;
int error = 0;
- pci_pm_default_resume_noirq(pci_dev);
+ pci_pm_default_resume_early(pci_dev);
if (pci_has_legacy_pm_support(pci_dev))
return pci_legacy_resume_early(dev);
@@ -931,6 +956,84 @@
#endif /* !CONFIG_HIBERNATION */
+#ifdef CONFIG_PM_RUNTIME
+
+static int pci_pm_runtime_suspend(struct device *dev)
+{
+ struct pci_dev *pci_dev = to_pci_dev(dev);
+ const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+ pci_power_t prev = pci_dev->current_state;
+ int error;
+
+ if (!pm || !pm->runtime_suspend)
+ return -ENOSYS;
+
+ error = pm->runtime_suspend(dev);
+ suspend_report_result(pm->runtime_suspend, error);
+ if (error)
+ return error;
+
+ pci_fixup_device(pci_fixup_suspend, pci_dev);
+
+ if (!pci_dev->state_saved && pci_dev->current_state != PCI_D0
+ && pci_dev->current_state != PCI_UNKNOWN) {
+ WARN_ONCE(pci_dev->current_state != prev,
+ "PCI PM: State of device not saved by %pF\n",
+ pm->runtime_suspend);
+ return 0;
+ }
+
+ if (!pci_dev->state_saved)
+ pci_save_state(pci_dev);
+
+ pci_finish_runtime_suspend(pci_dev);
+
+ return 0;
+}
+
+static int pci_pm_runtime_resume(struct device *dev)
+{
+ struct pci_dev *pci_dev = to_pci_dev(dev);
+ const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+
+ if (!pm || !pm->runtime_resume)
+ return -ENOSYS;
+
+ pci_pm_default_resume_early(pci_dev);
+ __pci_enable_wake(pci_dev, PCI_D0, true, false);
+ pci_fixup_device(pci_fixup_resume, pci_dev);
+
+ return pm->runtime_resume(dev);
+}
+
+static int pci_pm_runtime_idle(struct device *dev)
+{
+ const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+
+ if (!pm)
+ return -ENOSYS;
+
+ if (pm->runtime_idle) {
+ int ret = pm->runtime_idle(dev);
+ if (ret)
+ return ret;
+ }
+
+ pm_runtime_suspend(dev);
+
+ return 0;
+}
+
+#else /* !CONFIG_PM_RUNTIME */
+
+#define pci_pm_runtime_suspend NULL
+#define pci_pm_runtime_resume NULL
+#define pci_pm_runtime_idle NULL
+
+#endif /* !CONFIG_PM_RUNTIME */
+
+#ifdef CONFIG_PM_OPS
+
const struct dev_pm_ops pci_dev_pm_ops = {
.prepare = pci_pm_prepare,
.complete = pci_pm_complete,
@@ -946,15 +1049,18 @@
.thaw_noirq = pci_pm_thaw_noirq,
.poweroff_noirq = pci_pm_poweroff_noirq,
.restore_noirq = pci_pm_restore_noirq,
+ .runtime_suspend = pci_pm_runtime_suspend,
+ .runtime_resume = pci_pm_runtime_resume,
+ .runtime_idle = pci_pm_runtime_idle,
};
#define PCI_PM_OPS_PTR (&pci_dev_pm_ops)
-#else /* !CONFIG_PM_SLEEP */
+#else /* !COMFIG_PM_OPS */
#define PCI_PM_OPS_PTR NULL
-#endif /* !CONFIG_PM_SLEEP */
+#endif /* !COMFIG_PM_OPS */
/**
* __pci_register_driver - register a new pci driver
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 315fea4..f4a2738 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -19,8 +19,8 @@
#include <linux/pci-aspm.h>
#include <linux/pm_wakeup.h>
#include <linux/interrupt.h>
-#include <asm/dma.h> /* isa_dma_bridge_buggy */
#include <linux/device.h>
+#include <linux/pm_runtime.h>
#include <asm/setup.h>
#include "pci.h"
@@ -29,6 +29,12 @@
};
EXPORT_SYMBOL_GPL(pci_power_names);
+int isa_dma_bridge_buggy;
+EXPORT_SYMBOL(isa_dma_bridge_buggy);
+
+int pci_pci_problems;
+EXPORT_SYMBOL(pci_pci_problems);
+
unsigned int pci_pm_d3_delay;
static void pci_dev_d3_sleep(struct pci_dev *dev)
@@ -380,10 +386,9 @@
{
const struct pci_bus *bus = dev->bus;
int i;
- struct resource *best = NULL;
+ struct resource *best = NULL, *r;
- for(i = 0; i < PCI_BUS_NUM_RESOURCES; i++) {
- struct resource *r = bus->resource[i];
+ pci_bus_for_each_resource(bus, r, i) {
if (!r)
continue;
if (res->start && !(res->start >= r->start && res->end <= r->end))
@@ -457,6 +462,12 @@
pci_platform_pm->sleep_wake(dev, enable) : -ENODEV;
}
+static inline int platform_pci_run_wake(struct pci_dev *dev, bool enable)
+{
+ return pci_platform_pm ?
+ pci_platform_pm->run_wake(dev, enable) : -ENODEV;
+}
+
/**
* pci_raw_set_power_state - Use PCI PM registers to set the power state of
* given PCI device
@@ -1190,6 +1201,66 @@
}
/**
+ * pci_check_pme_status - Check if given device has generated PME.
+ * @dev: Device to check.
+ *
+ * Check the PME status of the device and if set, clear it and clear PME enable
+ * (if set). Return 'true' if PME status and PME enable were both set or
+ * 'false' otherwise.
+ */
+bool pci_check_pme_status(struct pci_dev *dev)
+{
+ int pmcsr_pos;
+ u16 pmcsr;
+ bool ret = false;
+
+ if (!dev->pm_cap)
+ return false;
+
+ pmcsr_pos = dev->pm_cap + PCI_PM_CTRL;
+ pci_read_config_word(dev, pmcsr_pos, &pmcsr);
+ if (!(pmcsr & PCI_PM_CTRL_PME_STATUS))
+ return false;
+
+ /* Clear PME status. */
+ pmcsr |= PCI_PM_CTRL_PME_STATUS;
+ if (pmcsr & PCI_PM_CTRL_PME_ENABLE) {
+ /* Disable PME to avoid interrupt flood. */
+ pmcsr &= ~PCI_PM_CTRL_PME_ENABLE;
+ ret = true;
+ }
+
+ pci_write_config_word(dev, pmcsr_pos, pmcsr);
+
+ return ret;
+}
+
+/**
+ * pci_pme_wakeup - Wake up a PCI device if its PME Status bit is set.
+ * @dev: Device to handle.
+ * @ign: Ignored.
+ *
+ * Check if @dev has generated PME and queue a resume request for it in that
+ * case.
+ */
+static int pci_pme_wakeup(struct pci_dev *dev, void *ign)
+{
+ if (pci_check_pme_status(dev))
+ pm_request_resume(&dev->dev);
+ return 0;
+}
+
+/**
+ * pci_pme_wakeup_bus - Walk given bus and wake up devices on it, if necessary.
+ * @bus: Top bus of the subtree to walk.
+ */
+void pci_pme_wakeup_bus(struct pci_bus *bus)
+{
+ if (bus)
+ pci_walk_bus(bus, pci_pme_wakeup, NULL);
+}
+
+/**
* pci_pme_capable - check the capability of PCI device to generate PME#
* @dev: PCI device to handle.
* @state: PCI state from which device will issue PME#.
@@ -1230,9 +1301,10 @@
}
/**
- * pci_enable_wake - enable PCI device as wakeup event source
+ * __pci_enable_wake - enable PCI device as wakeup event source
* @dev: PCI device affected
* @state: PCI state from which device will issue wakeup events
+ * @runtime: True if the events are to be generated at run time
* @enable: True to enable event generation; false to disable
*
* This enables the device as a wakeup event source, or disables it.
@@ -1248,11 +1320,12 @@
* Error code depending on the platform is returned if both the platform and
* the native mechanism fail to enable the generation of wake-up events
*/
-int pci_enable_wake(struct pci_dev *dev, pci_power_t state, bool enable)
+int __pci_enable_wake(struct pci_dev *dev, pci_power_t state,
+ bool runtime, bool enable)
{
int ret = 0;
- if (enable && !device_may_wakeup(&dev->dev))
+ if (enable && !runtime && !device_may_wakeup(&dev->dev))
return -EINVAL;
/* Don't do the same thing twice in a row for one device. */
@@ -1272,19 +1345,24 @@
pci_pme_active(dev, true);
else
ret = 1;
- error = platform_pci_sleep_wake(dev, true);
+ error = runtime ? platform_pci_run_wake(dev, true) :
+ platform_pci_sleep_wake(dev, true);
if (ret)
ret = error;
if (!ret)
dev->wakeup_prepared = true;
} else {
- platform_pci_sleep_wake(dev, false);
+ if (runtime)
+ platform_pci_run_wake(dev, false);
+ else
+ platform_pci_sleep_wake(dev, false);
pci_pme_active(dev, false);
dev->wakeup_prepared = false;
}
return ret;
}
+EXPORT_SYMBOL(__pci_enable_wake);
/**
* pci_wake_from_d3 - enable/disable device to wake up from D3_hot or D3_cold
@@ -1394,6 +1472,66 @@
}
/**
+ * pci_finish_runtime_suspend - Carry out PCI-specific part of runtime suspend.
+ * @dev: PCI device being suspended.
+ *
+ * Prepare @dev to generate wake-up events at run time and put it into a low
+ * power state.
+ */
+int pci_finish_runtime_suspend(struct pci_dev *dev)
+{
+ pci_power_t target_state = pci_target_state(dev);
+ int error;
+
+ if (target_state == PCI_POWER_ERROR)
+ return -EIO;
+
+ __pci_enable_wake(dev, target_state, true, pci_dev_run_wake(dev));
+
+ error = pci_set_power_state(dev, target_state);
+
+ if (error)
+ __pci_enable_wake(dev, target_state, true, false);
+
+ return error;
+}
+
+/**
+ * pci_dev_run_wake - Check if device can generate run-time wake-up events.
+ * @dev: Device to check.
+ *
+ * Return true if the device itself is cabable of generating wake-up events
+ * (through the platform or using the native PCIe PME) or if the device supports
+ * PME and one of its upstream bridges can generate wake-up events.
+ */
+bool pci_dev_run_wake(struct pci_dev *dev)
+{
+ struct pci_bus *bus = dev->bus;
+
+ if (device_run_wake(&dev->dev))
+ return true;
+
+ if (!dev->pme_support)
+ return false;
+
+ while (bus->parent) {
+ struct pci_dev *bridge = bus->self;
+
+ if (device_run_wake(&bridge->dev))
+ return true;
+
+ bus = bus->parent;
+ }
+
+ /* We have reached the root bus. */
+ if (bus->bridge)
+ return device_run_wake(bus->bridge);
+
+ return false;
+}
+EXPORT_SYMBOL_GPL(pci_dev_run_wake);
+
+/**
* pci_pm_init - Initialize PM functions of given PCI device
* @dev: PCI device to handle.
*/
@@ -2871,7 +3009,6 @@
EXPORT_SYMBOL(pci_restore_state);
EXPORT_SYMBOL(pci_pme_capable);
EXPORT_SYMBOL(pci_pme_active);
-EXPORT_SYMBOL(pci_enable_wake);
EXPORT_SYMBOL(pci_wake_from_d3);
EXPORT_SYMBOL(pci_target_state);
EXPORT_SYMBOL(pci_prepare_to_sleep);
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index fbd0e3a..4eb10f4 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -35,6 +35,10 @@
*
* @sleep_wake: enables/disables the system wake up capability of given device
*
+ * @run_wake: enables/disables the platform to generate run-time wake-up events
+ * for given device (the device's wake-up capability has to be
+ * enabled by @sleep_wake for this feature to work)
+ *
* If given platform is generally capable of power managing PCI devices, all of
* these callbacks are mandatory.
*/
@@ -44,11 +48,16 @@
pci_power_t (*choose_state)(struct pci_dev *dev);
bool (*can_wakeup)(struct pci_dev *dev);
int (*sleep_wake)(struct pci_dev *dev, bool enable);
+ int (*run_wake)(struct pci_dev *dev, bool enable);
};
extern int pci_set_platform_pm(struct pci_platform_pm_ops *ops);
extern void pci_update_current_state(struct pci_dev *dev, pci_power_t state);
extern void pci_disable_enabled_device(struct pci_dev *dev);
+extern bool pci_check_pme_status(struct pci_dev *dev);
+extern int pci_finish_runtime_suspend(struct pci_dev *dev);
+extern int __pci_pme_wakeup(struct pci_dev *dev, void *ign);
+extern void pci_pme_wakeup_bus(struct pci_bus *bus);
extern void pci_pm_init(struct pci_dev *dev);
extern void platform_pci_wakeup_init(struct pci_dev *dev);
extern void pci_allocate_cap_save_buffers(struct pci_dev *dev);
@@ -319,6 +328,13 @@
int (*reset)(struct pci_dev *dev, int probe);
};
+#ifdef CONFIG_PCI_QUIRKS
extern int pci_dev_specific_reset(struct pci_dev *dev, int probe);
+#else
+static inline int pci_dev_specific_reset(struct pci_dev *dev, int probe)
+{
+ return -ENOTTY;
+}
+#endif
#endif /* DRIVERS_PCI_H */
diff --git a/drivers/pci/pcie/Kconfig b/drivers/pci/pcie/Kconfig
index 5a0c6ad..b8b494b 100644
--- a/drivers/pci/pcie/Kconfig
+++ b/drivers/pci/pcie/Kconfig
@@ -46,3 +46,7 @@
help
This enables PCI Express ASPM debug support. It will add per-device
interface to control ASPM.
+
+config PCIE_PME
+ def_bool y
+ depends on PCIEPORTBUS && PM_RUNTIME && EXPERIMENTAL && ACPI
diff --git a/drivers/pci/pcie/Makefile b/drivers/pci/pcie/Makefile
index 11f6bb1e..ea65454 100644
--- a/drivers/pci/pcie/Makefile
+++ b/drivers/pci/pcie/Makefile
@@ -11,3 +11,5 @@
# Build PCI Express AER if needed
obj-$(CONFIG_PCIEAER) += aer/
+
+obj-$(CONFIG_PCIE_PME) += pme/
diff --git a/drivers/pci/pcie/pme/Makefile b/drivers/pci/pcie/pme/Makefile
new file mode 100644
index 0000000..8b92380
--- /dev/null
+++ b/drivers/pci/pcie/pme/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for PCI-Express Root Port PME signaling driver
+#
+
+obj-$(CONFIG_PCIE_PME) += pmedriver.o
+
+pmedriver-objs := pcie_pme.o
+pmedriver-$(CONFIG_ACPI) += pcie_pme_acpi.o
diff --git a/drivers/pci/pcie/pme/pcie_pme.c b/drivers/pci/pcie/pme/pcie_pme.c
new file mode 100644
index 0000000..7b3cbff
--- /dev/null
+++ b/drivers/pci/pcie/pme/pcie_pme.c
@@ -0,0 +1,505 @@
+/*
+ * PCIe Native PME support
+ *
+ * Copyright (C) 2007 - 2009 Intel Corp
+ * Copyright (C) 2007 - 2009 Shaohua Li <shaohua.li@intel.com>
+ * Copyright (C) 2009 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License V2. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/pcieport_if.h>
+#include <linux/acpi.h>
+#include <linux/pci-acpi.h>
+#include <linux/pm_runtime.h>
+
+#include "../../pci.h"
+#include "pcie_pme.h"
+
+#define PCI_EXP_RTSTA_PME 0x10000 /* PME status */
+#define PCI_EXP_RTSTA_PENDING 0x20000 /* PME pending */
+
+/*
+ * If set, this switch will prevent the PCIe root port PME service driver from
+ * being registered. Consequently, the interrupt-based PCIe PME signaling will
+ * not be used by any PCIe root ports in that case.
+ */
+static bool pcie_pme_disabled;
+
+/*
+ * The PCI Express Base Specification 2.0, Section 6.1.8, states the following:
+ * "In order to maintain compatibility with non-PCI Express-aware system
+ * software, system power management logic must be configured by firmware to use
+ * the legacy mechanism of signaling PME by default. PCI Express-aware system
+ * software must notify the firmware prior to enabling native, interrupt-based
+ * PME signaling." However, if the platform doesn't provide us with a suitable
+ * notification mechanism or the notification fails, it is not clear whether or
+ * not we are supposed to use the interrupt-based PCIe PME signaling. The
+ * switch below can be used to indicate the desired behaviour. When set, it
+ * will make the kernel use the interrupt-based PCIe PME signaling regardless of
+ * the platform notification status, although the kernel will attempt to notify
+ * the platform anyway. When unset, it will prevent the kernel from using the
+ * the interrupt-based PCIe PME signaling if the platform notification fails,
+ * which is the default.
+ */
+static bool pcie_pme_force_enable;
+
+/*
+ * If this switch is set, MSI will not be used for PCIe PME signaling. This
+ * causes the PCIe port driver to use INTx interrupts only, but it turns out
+ * that using MSI for PCIe PME signaling doesn't play well with PCIe PME-based
+ * wake-up from system sleep states.
+ */
+bool pcie_pme_msi_disabled;
+
+static int __init pcie_pme_setup(char *str)
+{
+ if (!strcmp(str, "off"))
+ pcie_pme_disabled = true;
+ else if (!strcmp(str, "force"))
+ pcie_pme_force_enable = true;
+ else if (!strcmp(str, "nomsi"))
+ pcie_pme_msi_disabled = true;
+ return 1;
+}
+__setup("pcie_pme=", pcie_pme_setup);
+
+/**
+ * pcie_pme_platform_setup - Ensure that the kernel controls the PCIe PME.
+ * @srv: PCIe PME root port service to use for carrying out the check.
+ *
+ * Notify the platform that the native PCIe PME is going to be used and return
+ * 'true' if the control of the PCIe PME registers has been acquired from the
+ * platform.
+ */
+static bool pcie_pme_platform_setup(struct pcie_device *srv)
+{
+ if (!pcie_pme_platform_notify(srv))
+ return true;
+ return pcie_pme_force_enable;
+}
+
+struct pcie_pme_service_data {
+ spinlock_t lock;
+ struct pcie_device *srv;
+ struct work_struct work;
+ bool noirq; /* Don't enable the PME interrupt used by this service. */
+};
+
+/**
+ * pcie_pme_interrupt_enable - Enable/disable PCIe PME interrupt generation.
+ * @dev: PCIe root port or event collector.
+ * @enable: Enable or disable the interrupt.
+ */
+static void pcie_pme_interrupt_enable(struct pci_dev *dev, bool enable)
+{
+ int rtctl_pos;
+ u16 rtctl;
+
+ rtctl_pos = pci_pcie_cap(dev) + PCI_EXP_RTCTL;
+
+ pci_read_config_word(dev, rtctl_pos, &rtctl);
+ if (enable)
+ rtctl |= PCI_EXP_RTCTL_PMEIE;
+ else
+ rtctl &= ~PCI_EXP_RTCTL_PMEIE;
+ pci_write_config_word(dev, rtctl_pos, rtctl);
+}
+
+/**
+ * pcie_pme_clear_status - Clear root port PME interrupt status.
+ * @dev: PCIe root port or event collector.
+ */
+static void pcie_pme_clear_status(struct pci_dev *dev)
+{
+ int rtsta_pos;
+ u32 rtsta;
+
+ rtsta_pos = pci_pcie_cap(dev) + PCI_EXP_RTSTA;
+
+ pci_read_config_dword(dev, rtsta_pos, &rtsta);
+ rtsta |= PCI_EXP_RTSTA_PME;
+ pci_write_config_dword(dev, rtsta_pos, rtsta);
+}
+
+/**
+ * pcie_pme_walk_bus - Scan a PCI bus for devices asserting PME#.
+ * @bus: PCI bus to scan.
+ *
+ * Scan given PCI bus and all buses under it for devices asserting PME#.
+ */
+static bool pcie_pme_walk_bus(struct pci_bus *bus)
+{
+ struct pci_dev *dev;
+ bool ret = false;
+
+ list_for_each_entry(dev, &bus->devices, bus_list) {
+ /* Skip PCIe devices in case we started from a root port. */
+ if (!pci_is_pcie(dev) && pci_check_pme_status(dev)) {
+ pm_request_resume(&dev->dev);
+ ret = true;
+ }
+
+ if (dev->subordinate && pcie_pme_walk_bus(dev->subordinate))
+ ret = true;
+ }
+
+ return ret;
+}
+
+/**
+ * pcie_pme_from_pci_bridge - Check if PCIe-PCI bridge generated a PME.
+ * @bus: Secondary bus of the bridge.
+ * @devfn: Device/function number to check.
+ *
+ * PME from PCI devices under a PCIe-PCI bridge may be converted to an in-band
+ * PCIe PME message. In such that case the bridge should use the Requester ID
+ * of device/function number 0 on its secondary bus.
+ */
+static bool pcie_pme_from_pci_bridge(struct pci_bus *bus, u8 devfn)
+{
+ struct pci_dev *dev;
+ bool found = false;
+
+ if (devfn)
+ return false;
+
+ dev = pci_dev_get(bus->self);
+ if (!dev)
+ return false;
+
+ if (pci_is_pcie(dev) && dev->pcie_type == PCI_EXP_TYPE_PCI_BRIDGE) {
+ down_read(&pci_bus_sem);
+ if (pcie_pme_walk_bus(bus))
+ found = true;
+ up_read(&pci_bus_sem);
+ }
+
+ pci_dev_put(dev);
+ return found;
+}
+
+/**
+ * pcie_pme_handle_request - Find device that generated PME and handle it.
+ * @port: Root port or event collector that generated the PME interrupt.
+ * @req_id: PCIe Requester ID of the device that generated the PME.
+ */
+static void pcie_pme_handle_request(struct pci_dev *port, u16 req_id)
+{
+ u8 busnr = req_id >> 8, devfn = req_id & 0xff;
+ struct pci_bus *bus;
+ struct pci_dev *dev;
+ bool found = false;
+
+ /* First, check if the PME is from the root port itself. */
+ if (port->devfn == devfn && port->bus->number == busnr) {
+ if (pci_check_pme_status(port)) {
+ pm_request_resume(&port->dev);
+ found = true;
+ } else {
+ /*
+ * Apparently, the root port generated the PME on behalf
+ * of a non-PCIe device downstream. If this is done by
+ * a root port, the Requester ID field in its status
+ * register may contain either the root port's, or the
+ * source device's information (PCI Express Base
+ * Specification, Rev. 2.0, Section 6.1.9).
+ */
+ down_read(&pci_bus_sem);
+ found = pcie_pme_walk_bus(port->subordinate);
+ up_read(&pci_bus_sem);
+ }
+ goto out;
+ }
+
+ /* Second, find the bus the source device is on. */
+ bus = pci_find_bus(pci_domain_nr(port->bus), busnr);
+ if (!bus)
+ goto out;
+
+ /* Next, check if the PME is from a PCIe-PCI bridge. */
+ found = pcie_pme_from_pci_bridge(bus, devfn);
+ if (found)
+ goto out;
+
+ /* Finally, try to find the PME source on the bus. */
+ down_read(&pci_bus_sem);
+ list_for_each_entry(dev, &bus->devices, bus_list) {
+ pci_dev_get(dev);
+ if (dev->devfn == devfn) {
+ found = true;
+ break;
+ }
+ pci_dev_put(dev);
+ }
+ up_read(&pci_bus_sem);
+
+ if (found) {
+ /* The device is there, but we have to check its PME status. */
+ found = pci_check_pme_status(dev);
+ if (found)
+ pm_request_resume(&dev->dev);
+ pci_dev_put(dev);
+ } else if (devfn) {
+ /*
+ * The device is not there, but we can still try to recover by
+ * assuming that the PME was reported by a PCIe-PCI bridge that
+ * used devfn different from zero.
+ */
+ dev_dbg(&port->dev, "PME interrupt generated for "
+ "non-existent device %02x:%02x.%d\n",
+ busnr, PCI_SLOT(devfn), PCI_FUNC(devfn));
+ found = pcie_pme_from_pci_bridge(bus, 0);
+ }
+
+ out:
+ if (!found)
+ dev_dbg(&port->dev, "Spurious native PME interrupt!\n");
+}
+
+/**
+ * pcie_pme_work_fn - Work handler for PCIe PME interrupt.
+ * @work: Work structure giving access to service data.
+ */
+static void pcie_pme_work_fn(struct work_struct *work)
+{
+ struct pcie_pme_service_data *data =
+ container_of(work, struct pcie_pme_service_data, work);
+ struct pci_dev *port = data->srv->port;
+ int rtsta_pos;
+ u32 rtsta;
+
+ rtsta_pos = pci_pcie_cap(port) + PCI_EXP_RTSTA;
+
+ spin_lock_irq(&data->lock);
+
+ for (;;) {
+ if (data->noirq)
+ break;
+
+ pci_read_config_dword(port, rtsta_pos, &rtsta);
+ if (rtsta & PCI_EXP_RTSTA_PME) {
+ /*
+ * Clear PME status of the port. If there are other
+ * pending PMEs, the status will be set again.
+ */
+ pcie_pme_clear_status(port);
+
+ spin_unlock_irq(&data->lock);
+ pcie_pme_handle_request(port, rtsta & 0xffff);
+ spin_lock_irq(&data->lock);
+
+ continue;
+ }
+
+ /* No need to loop if there are no more PMEs pending. */
+ if (!(rtsta & PCI_EXP_RTSTA_PENDING))
+ break;
+
+ spin_unlock_irq(&data->lock);
+ cpu_relax();
+ spin_lock_irq(&data->lock);
+ }
+
+ if (!data->noirq)
+ pcie_pme_interrupt_enable(port, true);
+
+ spin_unlock_irq(&data->lock);
+}
+
+/**
+ * pcie_pme_irq - Interrupt handler for PCIe root port PME interrupt.
+ * @irq: Interrupt vector.
+ * @context: Interrupt context pointer.
+ */
+static irqreturn_t pcie_pme_irq(int irq, void *context)
+{
+ struct pci_dev *port;
+ struct pcie_pme_service_data *data;
+ int rtsta_pos;
+ u32 rtsta;
+ unsigned long flags;
+
+ port = ((struct pcie_device *)context)->port;
+ data = get_service_data((struct pcie_device *)context);
+
+ rtsta_pos = pci_pcie_cap(port) + PCI_EXP_RTSTA;
+
+ spin_lock_irqsave(&data->lock, flags);
+ pci_read_config_dword(port, rtsta_pos, &rtsta);
+
+ if (!(rtsta & PCI_EXP_RTSTA_PME)) {
+ spin_unlock_irqrestore(&data->lock, flags);
+ return IRQ_NONE;
+ }
+
+ pcie_pme_interrupt_enable(port, false);
+ spin_unlock_irqrestore(&data->lock, flags);
+
+ /* We don't use pm_wq, because it's freezable. */
+ schedule_work(&data->work);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * pcie_pme_set_native - Set the PME interrupt flag for given device.
+ * @dev: PCI device to handle.
+ * @ign: Ignored.
+ */
+static int pcie_pme_set_native(struct pci_dev *dev, void *ign)
+{
+ dev_info(&dev->dev, "Signaling PME through PCIe PME interrupt\n");
+
+ device_set_run_wake(&dev->dev, true);
+ dev->pme_interrupt = true;
+ return 0;
+}
+
+/**
+ * pcie_pme_mark_devices - Set the PME interrupt flag for devices below a port.
+ * @port: PCIe root port or event collector to handle.
+ *
+ * For each device below given root port, including the port itself (or for each
+ * root complex integrated endpoint if @port is a root complex event collector)
+ * set the flag indicating that it can signal run-time wake-up events via PCIe
+ * PME interrupts.
+ */
+static void pcie_pme_mark_devices(struct pci_dev *port)
+{
+ pcie_pme_set_native(port, NULL);
+ if (port->subordinate) {
+ pci_walk_bus(port->subordinate, pcie_pme_set_native, NULL);
+ } else {
+ struct pci_bus *bus = port->bus;
+ struct pci_dev *dev;
+
+ /* Check if this is a root port event collector. */
+ if (port->pcie_type != PCI_EXP_TYPE_RC_EC || !bus)
+ return;
+
+ down_read(&pci_bus_sem);
+ list_for_each_entry(dev, &bus->devices, bus_list)
+ if (pci_is_pcie(dev)
+ && dev->pcie_type == PCI_EXP_TYPE_RC_END)
+ pcie_pme_set_native(dev, NULL);
+ up_read(&pci_bus_sem);
+ }
+}
+
+/**
+ * pcie_pme_probe - Initialize PCIe PME service for given root port.
+ * @srv: PCIe service to initialize.
+ */
+static int pcie_pme_probe(struct pcie_device *srv)
+{
+ struct pci_dev *port;
+ struct pcie_pme_service_data *data;
+ int ret;
+
+ if (!pcie_pme_platform_setup(srv))
+ return -EACCES;
+
+ data = kzalloc(sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ spin_lock_init(&data->lock);
+ INIT_WORK(&data->work, pcie_pme_work_fn);
+ data->srv = srv;
+ set_service_data(srv, data);
+
+ port = srv->port;
+ pcie_pme_interrupt_enable(port, false);
+ pcie_pme_clear_status(port);
+
+ ret = request_irq(srv->irq, pcie_pme_irq, IRQF_SHARED, "PCIe PME", srv);
+ if (ret) {
+ kfree(data);
+ } else {
+ pcie_pme_mark_devices(port);
+ pcie_pme_interrupt_enable(port, true);
+ }
+
+ return ret;
+}
+
+/**
+ * pcie_pme_suspend - Suspend PCIe PME service device.
+ * @srv: PCIe service device to suspend.
+ */
+static int pcie_pme_suspend(struct pcie_device *srv)
+{
+ struct pcie_pme_service_data *data = get_service_data(srv);
+ struct pci_dev *port = srv->port;
+
+ spin_lock_irq(&data->lock);
+ pcie_pme_interrupt_enable(port, false);
+ pcie_pme_clear_status(port);
+ data->noirq = true;
+ spin_unlock_irq(&data->lock);
+
+ synchronize_irq(srv->irq);
+
+ return 0;
+}
+
+/**
+ * pcie_pme_resume - Resume PCIe PME service device.
+ * @srv - PCIe service device to resume.
+ */
+static int pcie_pme_resume(struct pcie_device *srv)
+{
+ struct pcie_pme_service_data *data = get_service_data(srv);
+ struct pci_dev *port = srv->port;
+
+ spin_lock_irq(&data->lock);
+ data->noirq = false;
+ pcie_pme_clear_status(port);
+ pcie_pme_interrupt_enable(port, true);
+ spin_unlock_irq(&data->lock);
+
+ return 0;
+}
+
+/**
+ * pcie_pme_remove - Prepare PCIe PME service device for removal.
+ * @srv - PCIe service device to resume.
+ */
+static void pcie_pme_remove(struct pcie_device *srv)
+{
+ pcie_pme_suspend(srv);
+ free_irq(srv->irq, srv);
+ kfree(get_service_data(srv));
+}
+
+static struct pcie_port_service_driver pcie_pme_driver = {
+ .name = "pcie_pme",
+ .port_type = PCI_EXP_TYPE_ROOT_PORT,
+ .service = PCIE_PORT_SERVICE_PME,
+
+ .probe = pcie_pme_probe,
+ .suspend = pcie_pme_suspend,
+ .resume = pcie_pme_resume,
+ .remove = pcie_pme_remove,
+};
+
+/**
+ * pcie_pme_service_init - Register the PCIe PME service driver.
+ */
+static int __init pcie_pme_service_init(void)
+{
+ return pcie_pme_disabled ?
+ -ENODEV : pcie_port_service_register(&pcie_pme_driver);
+}
+
+module_init(pcie_pme_service_init);
diff --git a/drivers/pci/pcie/pme/pcie_pme.h b/drivers/pci/pcie/pme/pcie_pme.h
new file mode 100644
index 0000000..b30d2b7
--- /dev/null
+++ b/drivers/pci/pcie/pme/pcie_pme.h
@@ -0,0 +1,28 @@
+/*
+ * drivers/pci/pcie/pme/pcie_pme.h
+ *
+ * PCI Express Root Port PME signaling support
+ *
+ * Copyright (C) 2009 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc.
+ */
+
+#ifndef _PCIE_PME_H_
+#define _PCIE_PME_H_
+
+struct pcie_device;
+
+#ifdef CONFIG_ACPI
+extern int pcie_pme_acpi_setup(struct pcie_device *srv);
+
+static inline int pcie_pme_platform_notify(struct pcie_device *srv)
+{
+ return pcie_pme_acpi_setup(srv);
+}
+#else /* !CONFIG_ACPI */
+static inline int pcie_pme_platform_notify(struct pcie_device *srv)
+{
+ return 0;
+}
+#endif /* !CONFIG_ACPI */
+
+#endif
diff --git a/drivers/pci/pcie/pme/pcie_pme_acpi.c b/drivers/pci/pcie/pme/pcie_pme_acpi.c
new file mode 100644
index 0000000..83ab228
--- /dev/null
+++ b/drivers/pci/pcie/pme/pcie_pme_acpi.c
@@ -0,0 +1,54 @@
+/*
+ * PCIe Native PME support, ACPI-related part
+ *
+ * Copyright (C) 2009 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License V2. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/acpi.h>
+#include <linux/pci-acpi.h>
+#include <linux/pcieport_if.h>
+
+/**
+ * pcie_pme_acpi_setup - Request the ACPI BIOS to release control over PCIe PME.
+ * @srv - PCIe PME service for a root port or event collector.
+ *
+ * Invoked when the PCIe bus type loads PCIe PME service driver. To avoid
+ * conflict with the BIOS PCIe support requires the BIOS to yield PCIe PME
+ * control to the kernel.
+ */
+int pcie_pme_acpi_setup(struct pcie_device *srv)
+{
+ acpi_status status = AE_NOT_FOUND;
+ struct pci_dev *port = srv->port;
+ acpi_handle handle;
+ int error = 0;
+
+ if (acpi_pci_disabled)
+ return -ENOSYS;
+
+ dev_info(&port->dev, "Requesting control of PCIe PME from ACPI BIOS\n");
+
+ handle = acpi_find_root_bridge_handle(port);
+ if (!handle)
+ return -EINVAL;
+
+ status = acpi_pci_osc_control_set(handle,
+ OSC_PCI_EXPRESS_PME_CONTROL |
+ OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL);
+ if (ACPI_FAILURE(status)) {
+ dev_info(&port->dev,
+ "Failed to receive control of PCIe PME service: %s\n",
+ (status == AE_SUPPORT || status == AE_NOT_FOUND) ?
+ "no _OSC support" : "ACPI _OSC failed");
+ error = -ENODEV;
+ }
+
+ return error;
+}
diff --git a/drivers/pci/pcie/portdrv.h b/drivers/pci/pcie/portdrv.h
index aaeb9d2..813a5c3 100644
--- a/drivers/pci/pcie/portdrv.h
+++ b/drivers/pci/pcie/portdrv.h
@@ -30,4 +30,21 @@
extern int __must_check pcie_port_bus_register(void);
extern void pcie_port_bus_unregister(void);
+#ifdef CONFIG_PCIE_PME
+extern bool pcie_pme_msi_disabled;
+
+static inline void pcie_pme_disable_msi(void)
+{
+ pcie_pme_msi_disabled = true;
+}
+
+static inline bool pcie_pme_no_msi(void)
+{
+ return pcie_pme_msi_disabled;
+}
+#else /* !CONFIG_PCIE_PME */
+static inline void pcie_pme_disable_msi(void) {}
+static inline bool pcie_pme_no_msi(void) { return false; }
+#endif /* !CONFIG_PCIE_PME */
+
#endif /* _PORTDRV_H_ */
diff --git a/drivers/pci/pcie/portdrv_core.c b/drivers/pci/pcie/portdrv_core.c
index b174188..0d34ff4 100644
--- a/drivers/pci/pcie/portdrv_core.c
+++ b/drivers/pci/pcie/portdrv_core.c
@@ -186,16 +186,24 @@
*/
static int init_service_irqs(struct pci_dev *dev, int *irqs, int mask)
{
- int i, irq;
+ int i, irq = -1;
+
+ /* We have to use INTx if MSI cannot be used for PCIe PME. */
+ if ((mask & PCIE_PORT_SERVICE_PME) && pcie_pme_no_msi()) {
+ if (dev->pin)
+ irq = dev->irq;
+ goto no_msi;
+ }
/* Try to use MSI-X if supported */
if (!pcie_port_enable_msix(dev, irqs, mask))
return 0;
+
/* We're not going to use MSI-X, so try MSI and fall back to INTx */
- irq = -1;
if (!pci_enable_msi(dev) || dev->pin)
irq = dev->irq;
+ no_msi:
for (i = 0; i < PCIE_PORT_DEVICE_MAXSERVICES; i++)
irqs[i] = irq;
irqs[PCIE_PORT_SERVICE_VC_SHIFT] = -1;
diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c
index 13c8972..127e8f1 100644
--- a/drivers/pci/pcie/portdrv_pci.c
+++ b/drivers/pci/pcie/portdrv_pci.c
@@ -15,6 +15,7 @@
#include <linux/slab.h>
#include <linux/pcieport_if.h>
#include <linux/aer.h>
+#include <linux/dmi.h>
#include "portdrv.h"
#include "aer/aerdrv.h"
@@ -273,10 +274,36 @@
.driver.pm = PCIE_PORTDRV_PM_OPS,
};
+static int __init dmi_pcie_pme_disable_msi(const struct dmi_system_id *d)
+{
+ pr_notice("%s detected: will not use MSI for PCIe PME signaling\n",
+ d->ident);
+ pcie_pme_disable_msi();
+ return 0;
+}
+
+static struct dmi_system_id __initdata pcie_portdrv_dmi_table[] = {
+ /*
+ * Boxes that should not use MSI for PCIe PME signaling.
+ */
+ {
+ .callback = dmi_pcie_pme_disable_msi,
+ .ident = "MSI Wind U-100",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR,
+ "MICRO-STAR INTERNATIONAL CO., LTD"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "U-100"),
+ },
+ },
+ {}
+};
+
static int __init pcie_portdrv_init(void)
{
int retval;
+ dmi_check_system(pcie_portdrv_dmi_table);
+
retval = pcie_port_bus_register();
if (retval) {
printk(KERN_WARNING "PCIE: bus_register error: %d\n", retval);
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 446e4a9..270d069 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -89,6 +89,7 @@
if (pci_bus->bridge)
put_device(pci_bus->bridge);
+ pci_bus_remove_resources(pci_bus);
kfree(pci_bus);
}
@@ -281,26 +282,12 @@
}
}
-void __devinit pci_read_bridge_bases(struct pci_bus *child)
+static void __devinit pci_read_bridge_io(struct pci_bus *child)
{
struct pci_dev *dev = child->self;
u8 io_base_lo, io_limit_lo;
- u16 mem_base_lo, mem_limit_lo;
unsigned long base, limit;
struct resource *res;
- int i;
-
- if (pci_is_root_bus(child)) /* It's a host bus, nothing to read */
- return;
-
- dev_info(&dev->dev, "PCI bridge to [bus %02x-%02x]%s\n",
- child->secondary, child->subordinate,
- dev->transparent ? " (subtractive decode)": "");
-
- if (dev->transparent) {
- for(i = 3; i < PCI_BUS_NUM_RESOURCES; i++)
- child->resource[i] = child->parent->resource[i - 3];
- }
res = child->resource[0];
pci_read_config_byte(dev, PCI_IO_BASE, &io_base_lo);
@@ -316,26 +303,50 @@
limit |= (io_limit_hi << 16);
}
- if (base <= limit) {
+ if (base && base <= limit) {
res->flags = (io_base_lo & PCI_IO_RANGE_TYPE_MASK) | IORESOURCE_IO;
if (!res->start)
res->start = base;
if (!res->end)
res->end = limit + 0xfff;
dev_printk(KERN_DEBUG, &dev->dev, " bridge window %pR\n", res);
+ } else {
+ dev_printk(KERN_DEBUG, &dev->dev,
+ " bridge window [io %04lx - %04lx] reg reading\n",
+ base, limit);
}
+}
+
+static void __devinit pci_read_bridge_mmio(struct pci_bus *child)
+{
+ struct pci_dev *dev = child->self;
+ u16 mem_base_lo, mem_limit_lo;
+ unsigned long base, limit;
+ struct resource *res;
res = child->resource[1];
pci_read_config_word(dev, PCI_MEMORY_BASE, &mem_base_lo);
pci_read_config_word(dev, PCI_MEMORY_LIMIT, &mem_limit_lo);
base = (mem_base_lo & PCI_MEMORY_RANGE_MASK) << 16;
limit = (mem_limit_lo & PCI_MEMORY_RANGE_MASK) << 16;
- if (base <= limit) {
+ if (base && base <= limit) {
res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) | IORESOURCE_MEM;
res->start = base;
res->end = limit + 0xfffff;
dev_printk(KERN_DEBUG, &dev->dev, " bridge window %pR\n", res);
+ } else {
+ dev_printk(KERN_DEBUG, &dev->dev,
+ " bridge window [mem 0x%08lx - 0x%08lx] reg reading\n",
+ base, limit + 0xfffff);
}
+}
+
+static void __devinit pci_read_bridge_mmio_pref(struct pci_bus *child)
+{
+ struct pci_dev *dev = child->self;
+ u16 mem_base_lo, mem_limit_lo;
+ unsigned long base, limit;
+ struct resource *res;
res = child->resource[2];
pci_read_config_word(dev, PCI_PREF_MEMORY_BASE, &mem_base_lo);
@@ -366,7 +377,7 @@
#endif
}
}
- if (base <= limit) {
+ if (base && base <= limit) {
res->flags = (mem_base_lo & PCI_PREF_RANGE_TYPE_MASK) |
IORESOURCE_MEM | IORESOURCE_PREFETCH;
if (res->flags & PCI_PREF_RANGE_TYPE_64)
@@ -374,6 +385,44 @@
res->start = base;
res->end = limit + 0xfffff;
dev_printk(KERN_DEBUG, &dev->dev, " bridge window %pR\n", res);
+ } else {
+ dev_printk(KERN_DEBUG, &dev->dev,
+ " bridge window [mem 0x%08lx - %08lx pref] reg reading\n",
+ base, limit + 0xfffff);
+ }
+}
+
+void __devinit pci_read_bridge_bases(struct pci_bus *child)
+{
+ struct pci_dev *dev = child->self;
+ struct resource *res;
+ int i;
+
+ if (pci_is_root_bus(child)) /* It's a host bus, nothing to read */
+ return;
+
+ dev_info(&dev->dev, "PCI bridge to [bus %02x-%02x]%s\n",
+ child->secondary, child->subordinate,
+ dev->transparent ? " (subtractive decode)" : "");
+
+ pci_bus_remove_resources(child);
+ for (i = 0; i < PCI_BRIDGE_RESOURCE_NUM; i++)
+ child->resource[i] = &dev->resource[PCI_BRIDGE_RESOURCES+i];
+
+ pci_read_bridge_io(child);
+ pci_read_bridge_mmio(child);
+ pci_read_bridge_mmio_pref(child);
+
+ if (dev->transparent) {
+ pci_bus_for_each_resource(child->parent, res, i) {
+ if (res) {
+ pci_bus_add_resource(child, res,
+ PCI_SUBTRACTIVE_DECODE);
+ dev_printk(KERN_DEBUG, &dev->dev,
+ " bridge window %pR (subtractive decode)\n",
+ res);
+ }
+ }
}
}
@@ -387,10 +436,147 @@
INIT_LIST_HEAD(&b->children);
INIT_LIST_HEAD(&b->devices);
INIT_LIST_HEAD(&b->slots);
+ INIT_LIST_HEAD(&b->resources);
+ b->max_bus_speed = PCI_SPEED_UNKNOWN;
+ b->cur_bus_speed = PCI_SPEED_UNKNOWN;
}
return b;
}
+static unsigned char pcix_bus_speed[] = {
+ PCI_SPEED_UNKNOWN, /* 0 */
+ PCI_SPEED_66MHz_PCIX, /* 1 */
+ PCI_SPEED_100MHz_PCIX, /* 2 */
+ PCI_SPEED_133MHz_PCIX, /* 3 */
+ PCI_SPEED_UNKNOWN, /* 4 */
+ PCI_SPEED_66MHz_PCIX_ECC, /* 5 */
+ PCI_SPEED_100MHz_PCIX_ECC, /* 6 */
+ PCI_SPEED_133MHz_PCIX_ECC, /* 7 */
+ PCI_SPEED_UNKNOWN, /* 8 */
+ PCI_SPEED_66MHz_PCIX_266, /* 9 */
+ PCI_SPEED_100MHz_PCIX_266, /* A */
+ PCI_SPEED_133MHz_PCIX_266, /* B */
+ PCI_SPEED_UNKNOWN, /* C */
+ PCI_SPEED_66MHz_PCIX_533, /* D */
+ PCI_SPEED_100MHz_PCIX_533, /* E */
+ PCI_SPEED_133MHz_PCIX_533 /* F */
+};
+
+static unsigned char pcie_link_speed[] = {
+ PCI_SPEED_UNKNOWN, /* 0 */
+ PCIE_SPEED_2_5GT, /* 1 */
+ PCIE_SPEED_5_0GT, /* 2 */
+ PCIE_SPEED_8_0GT, /* 3 */
+ PCI_SPEED_UNKNOWN, /* 4 */
+ PCI_SPEED_UNKNOWN, /* 5 */
+ PCI_SPEED_UNKNOWN, /* 6 */
+ PCI_SPEED_UNKNOWN, /* 7 */
+ PCI_SPEED_UNKNOWN, /* 8 */
+ PCI_SPEED_UNKNOWN, /* 9 */
+ PCI_SPEED_UNKNOWN, /* A */
+ PCI_SPEED_UNKNOWN, /* B */
+ PCI_SPEED_UNKNOWN, /* C */
+ PCI_SPEED_UNKNOWN, /* D */
+ PCI_SPEED_UNKNOWN, /* E */
+ PCI_SPEED_UNKNOWN /* F */
+};
+
+void pcie_update_link_speed(struct pci_bus *bus, u16 linksta)
+{
+ bus->cur_bus_speed = pcie_link_speed[linksta & 0xf];
+}
+EXPORT_SYMBOL_GPL(pcie_update_link_speed);
+
+static unsigned char agp_speeds[] = {
+ AGP_UNKNOWN,
+ AGP_1X,
+ AGP_2X,
+ AGP_4X,
+ AGP_8X
+};
+
+static enum pci_bus_speed agp_speed(int agp3, int agpstat)
+{
+ int index = 0;
+
+ if (agpstat & 4)
+ index = 3;
+ else if (agpstat & 2)
+ index = 2;
+ else if (agpstat & 1)
+ index = 1;
+ else
+ goto out;
+
+ if (agp3) {
+ index += 2;
+ if (index == 5)
+ index = 0;
+ }
+
+ out:
+ return agp_speeds[index];
+}
+
+
+static void pci_set_bus_speed(struct pci_bus *bus)
+{
+ struct pci_dev *bridge = bus->self;
+ int pos;
+
+ pos = pci_find_capability(bridge, PCI_CAP_ID_AGP);
+ if (!pos)
+ pos = pci_find_capability(bridge, PCI_CAP_ID_AGP3);
+ if (pos) {
+ u32 agpstat, agpcmd;
+
+ pci_read_config_dword(bridge, pos + PCI_AGP_STATUS, &agpstat);
+ bus->max_bus_speed = agp_speed(agpstat & 8, agpstat & 7);
+
+ pci_read_config_dword(bridge, pos + PCI_AGP_COMMAND, &agpcmd);
+ bus->cur_bus_speed = agp_speed(agpstat & 8, agpcmd & 7);
+ }
+
+ pos = pci_find_capability(bridge, PCI_CAP_ID_PCIX);
+ if (pos) {
+ u16 status;
+ enum pci_bus_speed max;
+ pci_read_config_word(bridge, pos + 2, &status);
+
+ if (status & 0x8000) {
+ max = PCI_SPEED_133MHz_PCIX_533;
+ } else if (status & 0x4000) {
+ max = PCI_SPEED_133MHz_PCIX_266;
+ } else if (status & 0x0002) {
+ if (((status >> 12) & 0x3) == 2) {
+ max = PCI_SPEED_133MHz_PCIX_ECC;
+ } else {
+ max = PCI_SPEED_133MHz_PCIX;
+ }
+ } else {
+ max = PCI_SPEED_66MHz_PCIX;
+ }
+
+ bus->max_bus_speed = max;
+ bus->cur_bus_speed = pcix_bus_speed[(status >> 6) & 0xf];
+
+ return;
+ }
+
+ pos = pci_find_capability(bridge, PCI_CAP_ID_EXP);
+ if (pos) {
+ u32 linkcap;
+ u16 linksta;
+
+ pci_read_config_dword(bridge, pos + PCI_EXP_LNKCAP, &linkcap);
+ bus->max_bus_speed = pcie_link_speed[linkcap & 0xf];
+
+ pci_read_config_word(bridge, pos + PCI_EXP_LNKSTA, &linksta);
+ pcie_update_link_speed(bus, linksta);
+ }
+}
+
+
static struct pci_bus *pci_alloc_child_bus(struct pci_bus *parent,
struct pci_dev *bridge, int busnr)
{
@@ -430,6 +616,8 @@
child->self = bridge;
child->bridge = get_device(&bridge->dev);
+ pci_set_bus_speed(child);
+
/* Set up default resource pointers and names.. */
for (i = 0; i < PCI_BRIDGE_RESOURCE_NUM; i++) {
child->resource[i] = &bridge->resource[PCI_BRIDGE_RESOURCES+i];
@@ -1081,6 +1269,45 @@
}
EXPORT_SYMBOL(pci_scan_single_device);
+static unsigned next_ari_fn(struct pci_dev *dev, unsigned fn)
+{
+ u16 cap;
+ unsigned pos, next_fn;
+
+ if (!dev)
+ return 0;
+
+ pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ARI);
+ if (!pos)
+ return 0;
+ pci_read_config_word(dev, pos + 4, &cap);
+ next_fn = cap >> 8;
+ if (next_fn <= fn)
+ return 0;
+ return next_fn;
+}
+
+static unsigned next_trad_fn(struct pci_dev *dev, unsigned fn)
+{
+ return (fn + 1) % 8;
+}
+
+static unsigned no_next_fn(struct pci_dev *dev, unsigned fn)
+{
+ return 0;
+}
+
+static int only_one_child(struct pci_bus *bus)
+{
+ struct pci_dev *parent = bus->self;
+ if (!parent || !pci_is_pcie(parent))
+ return 0;
+ if (parent->pcie_type == PCI_EXP_TYPE_ROOT_PORT ||
+ parent->pcie_type == PCI_EXP_TYPE_DOWNSTREAM)
+ return 1;
+ return 0;
+}
+
/**
* pci_scan_slot - scan a PCI slot on a bus for devices.
* @bus: PCI bus to scan
@@ -1094,21 +1321,30 @@
*/
int pci_scan_slot(struct pci_bus *bus, int devfn)
{
- int fn, nr = 0;
+ unsigned fn, nr = 0;
struct pci_dev *dev;
+ unsigned (*next_fn)(struct pci_dev *, unsigned) = no_next_fn;
+
+ if (only_one_child(bus) && (devfn > 0))
+ return 0; /* Already scanned the entire slot */
dev = pci_scan_single_device(bus, devfn);
- if (dev && !dev->is_added) /* new device? */
+ if (!dev)
+ return 0;
+ if (!dev->is_added)
nr++;
- if (dev && dev->multifunction) {
- for (fn = 1; fn < 8; fn++) {
- dev = pci_scan_single_device(bus, devfn + fn);
- if (dev) {
- if (!dev->is_added)
- nr++;
- dev->multifunction = 1;
- }
+ if (pci_ari_enabled(bus))
+ next_fn = next_ari_fn;
+ else if (dev->multifunction)
+ next_fn = next_trad_fn;
+
+ for (fn = next_fn(dev, 0); fn > 0; fn = next_fn(dev, fn)) {
+ dev = pci_scan_single_device(bus, devfn + fn);
+ if (dev) {
+ if (!dev->is_added)
+ nr++;
+ dev->multifunction = 1;
}
}
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index d58b940..790eb69 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -25,14 +25,9 @@
#include <linux/dmi.h>
#include <linux/pci-aspm.h>
#include <linux/ioport.h>
+#include <asm/dma.h> /* isa_dma_bridge_buggy */
#include "pci.h"
-int isa_dma_bridge_buggy;
-EXPORT_SYMBOL(isa_dma_bridge_buggy);
-int pci_pci_problems;
-EXPORT_SYMBOL(pci_pci_problems);
-
-#ifdef CONFIG_PCI_QUIRKS
/*
* This quirk function disables memory decoding and releases memory resources
* of the device specified by kernel's boot parameter 'pci=resource_alignment='.
@@ -2612,6 +2607,7 @@
}
pci_do_fixups(dev, start, end);
}
+EXPORT_SYMBOL(pci_fixup_device);
static int __init pci_apply_final_quirks(void)
{
@@ -2723,9 +2719,3 @@
return -ENOTTY;
}
-
-#else
-void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev) {}
-int pci_dev_specific_reset(struct pci_dev *dev, int probe) { return -ENOTTY; }
-#endif
-EXPORT_SYMBOL(pci_fixup_device);
diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index c48cd37..bf32f07 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -27,37 +27,83 @@
#include <linux/slab.h>
#include "pci.h"
-static void pbus_assign_resources_sorted(const struct pci_bus *bus)
-{
- struct pci_dev *dev;
+struct resource_list_x {
+ struct resource_list_x *next;
struct resource *res;
- struct resource_list head, *list, *tmp;
- int idx;
+ struct pci_dev *dev;
+ resource_size_t start;
+ resource_size_t end;
+ unsigned long flags;
+};
- head.next = NULL;
- list_for_each_entry(dev, &bus->devices, bus_list) {
- u16 class = dev->class >> 8;
+static void add_to_failed_list(struct resource_list_x *head,
+ struct pci_dev *dev, struct resource *res)
+{
+ struct resource_list_x *list = head;
+ struct resource_list_x *ln = list->next;
+ struct resource_list_x *tmp;
- /* Don't touch classless devices or host bridges or ioapics. */
- if (class == PCI_CLASS_NOT_DEFINED ||
- class == PCI_CLASS_BRIDGE_HOST)
- continue;
-
- /* Don't touch ioapic devices already enabled by firmware */
- if (class == PCI_CLASS_SYSTEM_PIC) {
- u16 command;
- pci_read_config_word(dev, PCI_COMMAND, &command);
- if (command & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY))
- continue;
- }
-
- pdev_sort_resources(dev, &head);
+ tmp = kmalloc(sizeof(*tmp), GFP_KERNEL);
+ if (!tmp) {
+ pr_warning("add_to_failed_list: kmalloc() failed!\n");
+ return;
}
- for (list = head.next; list;) {
+ tmp->next = ln;
+ tmp->res = res;
+ tmp->dev = dev;
+ tmp->start = res->start;
+ tmp->end = res->end;
+ tmp->flags = res->flags;
+ list->next = tmp;
+}
+
+static void free_failed_list(struct resource_list_x *head)
+{
+ struct resource_list_x *list, *tmp;
+
+ for (list = head->next; list;) {
+ tmp = list;
+ list = list->next;
+ kfree(tmp);
+ }
+
+ head->next = NULL;
+}
+
+static void __dev_sort_resources(struct pci_dev *dev,
+ struct resource_list *head)
+{
+ u16 class = dev->class >> 8;
+
+ /* Don't touch classless devices or host bridges or ioapics. */
+ if (class == PCI_CLASS_NOT_DEFINED || class == PCI_CLASS_BRIDGE_HOST)
+ return;
+
+ /* Don't touch ioapic devices already enabled by firmware */
+ if (class == PCI_CLASS_SYSTEM_PIC) {
+ u16 command;
+ pci_read_config_word(dev, PCI_COMMAND, &command);
+ if (command & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY))
+ return;
+ }
+
+ pdev_sort_resources(dev, head);
+}
+
+static void __assign_resources_sorted(struct resource_list *head,
+ struct resource_list_x *fail_head)
+{
+ struct resource *res;
+ struct resource_list *list, *tmp;
+ int idx;
+
+ for (list = head->next; list;) {
res = list->res;
idx = res - &list->dev->resource[0];
if (pci_assign_resource(list->dev, idx)) {
+ if (fail_head && !pci_is_root_bus(list->dev->bus))
+ add_to_failed_list(fail_head, list->dev, res);
res->start = 0;
res->end = 0;
res->flags = 0;
@@ -68,6 +114,30 @@
}
}
+static void pdev_assign_resources_sorted(struct pci_dev *dev,
+ struct resource_list_x *fail_head)
+{
+ struct resource_list head;
+
+ head.next = NULL;
+ __dev_sort_resources(dev, &head);
+ __assign_resources_sorted(&head, fail_head);
+
+}
+
+static void pbus_assign_resources_sorted(const struct pci_bus *bus,
+ struct resource_list_x *fail_head)
+{
+ struct pci_dev *dev;
+ struct resource_list head;
+
+ head.next = NULL;
+ list_for_each_entry(dev, &bus->devices, bus_list)
+ __dev_sort_resources(dev, &head);
+
+ __assign_resources_sorted(&head, fail_head);
+}
+
void pci_setup_cardbus(struct pci_bus *bus)
{
struct pci_dev *bridge = bus->self;
@@ -134,18 +204,12 @@
config space writes, so it's quite possible that an I/O window of
the bridge will have some undesirable address (e.g. 0) after the
first write. Ditto 64-bit prefetchable MMIO. */
-static void pci_setup_bridge(struct pci_bus *bus)
+static void pci_setup_bridge_io(struct pci_bus *bus)
{
struct pci_dev *bridge = bus->self;
struct resource *res;
struct pci_bus_region region;
- u32 l, bu, lu, io_upper16;
-
- if (pci_is_enabled(bridge))
- return;
-
- dev_info(&bridge->dev, "PCI bridge to [bus %02x-%02x]\n",
- bus->secondary, bus->subordinate);
+ u32 l, io_upper16;
/* Set up the top and bottom of the PCI I/O segment for this bus. */
res = bus->resource[0];
@@ -158,8 +222,7 @@
/* Set up upper 16 bits of I/O base/limit. */
io_upper16 = (region.end & 0xffff0000) | (region.start >> 16);
dev_info(&bridge->dev, " bridge window %pR\n", res);
- }
- else {
+ } else {
/* Clear upper 16 bits of I/O base/limit. */
io_upper16 = 0;
l = 0x00f0;
@@ -171,21 +234,35 @@
pci_write_config_dword(bridge, PCI_IO_BASE, l);
/* Update upper 16 bits of I/O base/limit. */
pci_write_config_dword(bridge, PCI_IO_BASE_UPPER16, io_upper16);
+}
- /* Set up the top and bottom of the PCI Memory segment
- for this bus. */
+static void pci_setup_bridge_mmio(struct pci_bus *bus)
+{
+ struct pci_dev *bridge = bus->self;
+ struct resource *res;
+ struct pci_bus_region region;
+ u32 l;
+
+ /* Set up the top and bottom of the PCI Memory segment for this bus. */
res = bus->resource[1];
pcibios_resource_to_bus(bridge, ®ion, res);
if (res->flags & IORESOURCE_MEM) {
l = (region.start >> 16) & 0xfff0;
l |= region.end & 0xfff00000;
dev_info(&bridge->dev, " bridge window %pR\n", res);
- }
- else {
+ } else {
l = 0x0000fff0;
dev_info(&bridge->dev, " bridge window [mem disabled]\n");
}
pci_write_config_dword(bridge, PCI_MEMORY_BASE, l);
+}
+
+static void pci_setup_bridge_mmio_pref(struct pci_bus *bus)
+{
+ struct pci_dev *bridge = bus->self;
+ struct resource *res;
+ struct pci_bus_region region;
+ u32 l, bu, lu;
/* Clear out the upper 32 bits of PREF limit.
If PCI_PREF_BASE_UPPER32 was non-zero, this temporarily
@@ -204,8 +281,7 @@
lu = upper_32_bits(region.end);
}
dev_info(&bridge->dev, " bridge window %pR\n", res);
- }
- else {
+ } else {
l = 0x0000fff0;
dev_info(&bridge->dev, " bridge window [mem pref disabled]\n");
}
@@ -214,10 +290,35 @@
/* Set the upper 32 bits of PREF base & limit. */
pci_write_config_dword(bridge, PCI_PREF_BASE_UPPER32, bu);
pci_write_config_dword(bridge, PCI_PREF_LIMIT_UPPER32, lu);
+}
+
+static void __pci_setup_bridge(struct pci_bus *bus, unsigned long type)
+{
+ struct pci_dev *bridge = bus->self;
+
+ dev_info(&bridge->dev, "PCI bridge to [bus %02x-%02x]\n",
+ bus->secondary, bus->subordinate);
+
+ if (type & IORESOURCE_IO)
+ pci_setup_bridge_io(bus);
+
+ if (type & IORESOURCE_MEM)
+ pci_setup_bridge_mmio(bus);
+
+ if (type & IORESOURCE_PREFETCH)
+ pci_setup_bridge_mmio_pref(bus);
pci_write_config_word(bridge, PCI_BRIDGE_CONTROL, bus->bridge_ctl);
}
+static void pci_setup_bridge(struct pci_bus *bus)
+{
+ unsigned long type = IORESOURCE_IO | IORESOURCE_MEM |
+ IORESOURCE_PREFETCH;
+
+ __pci_setup_bridge(bus, type);
+}
+
/* Check whether the bridge supports optional I/O and
prefetchable memory ranges. If not, the respective
base/limit registers must be read-only and read as 0. */
@@ -253,8 +354,11 @@
}
if (pmem) {
b_res[2].flags |= IORESOURCE_MEM | IORESOURCE_PREFETCH;
- if ((pmem & PCI_PREF_RANGE_TYPE_MASK) == PCI_PREF_RANGE_TYPE_64)
+ if ((pmem & PCI_PREF_RANGE_TYPE_MASK) ==
+ PCI_PREF_RANGE_TYPE_64) {
b_res[2].flags |= IORESOURCE_MEM_64;
+ b_res[2].flags |= PCI_PREF_RANGE_TYPE_64;
+ }
}
/* double check if bridge does support 64 bit pref */
@@ -283,8 +387,7 @@
unsigned long type_mask = IORESOURCE_IO | IORESOURCE_MEM |
IORESOURCE_PREFETCH;
- for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) {
- r = bus->resource[i];
+ pci_bus_for_each_resource(bus, r, i) {
if (r == &ioport_resource || r == &iomem_resource)
continue;
if (r && (r->flags & type_mask) == type && !r->parent)
@@ -301,7 +404,7 @@
{
struct pci_dev *dev;
struct resource *b_res = find_free_bus_resource(bus, IORESOURCE_IO);
- unsigned long size = 0, size1 = 0;
+ unsigned long size = 0, size1 = 0, old_size;
if (!b_res)
return;
@@ -326,12 +429,17 @@
}
if (size < min_size)
size = min_size;
+ old_size = resource_size(b_res);
+ if (old_size == 1)
+ old_size = 0;
/* To be fixed in 2.5: we should have sort of HAVE_ISA
flag in the struct pci_bus. */
#if defined(CONFIG_ISA) || defined(CONFIG_EISA)
size = (size & 0xff) + ((size & ~0xffUL) << 2);
#endif
size = ALIGN(size + size1, 4096);
+ if (size < old_size)
+ size = old_size;
if (!size) {
if (b_res->start || b_res->end)
dev_info(&bus->self->dev, "disabling bridge window "
@@ -352,7 +460,7 @@
unsigned long type, resource_size_t min_size)
{
struct pci_dev *dev;
- resource_size_t min_align, align, size;
+ resource_size_t min_align, align, size, old_size;
resource_size_t aligns[12]; /* Alignments from 1Mb to 2Gb */
int order, max_order;
struct resource *b_res = find_free_bus_resource(bus, type);
@@ -402,6 +510,11 @@
}
if (size < min_size)
size = min_size;
+ old_size = resource_size(b_res);
+ if (old_size == 1)
+ old_size = 0;
+ if (size < old_size)
+ size = old_size;
align = 0;
min_align = 0;
@@ -538,23 +651,25 @@
}
EXPORT_SYMBOL(pci_bus_size_bridges);
-void __ref pci_bus_assign_resources(const struct pci_bus *bus)
+static void __ref __pci_bus_assign_resources(const struct pci_bus *bus,
+ struct resource_list_x *fail_head)
{
struct pci_bus *b;
struct pci_dev *dev;
- pbus_assign_resources_sorted(bus);
+ pbus_assign_resources_sorted(bus, fail_head);
list_for_each_entry(dev, &bus->devices, bus_list) {
b = dev->subordinate;
if (!b)
continue;
- pci_bus_assign_resources(b);
+ __pci_bus_assign_resources(b, fail_head);
switch (dev->class >> 8) {
case PCI_CLASS_BRIDGE_PCI:
- pci_setup_bridge(b);
+ if (!pci_is_enabled(dev))
+ pci_setup_bridge(b);
break;
case PCI_CLASS_BRIDGE_CARDBUS:
@@ -568,15 +683,130 @@
}
}
}
+
+void __ref pci_bus_assign_resources(const struct pci_bus *bus)
+{
+ __pci_bus_assign_resources(bus, NULL);
+}
EXPORT_SYMBOL(pci_bus_assign_resources);
+static void __ref __pci_bridge_assign_resources(const struct pci_dev *bridge,
+ struct resource_list_x *fail_head)
+{
+ struct pci_bus *b;
+
+ pdev_assign_resources_sorted((struct pci_dev *)bridge, fail_head);
+
+ b = bridge->subordinate;
+ if (!b)
+ return;
+
+ __pci_bus_assign_resources(b, fail_head);
+
+ switch (bridge->class >> 8) {
+ case PCI_CLASS_BRIDGE_PCI:
+ pci_setup_bridge(b);
+ break;
+
+ case PCI_CLASS_BRIDGE_CARDBUS:
+ pci_setup_cardbus(b);
+ break;
+
+ default:
+ dev_info(&bridge->dev, "not setting up bridge for bus "
+ "%04x:%02x\n", pci_domain_nr(b), b->number);
+ break;
+ }
+}
+static void pci_bridge_release_resources(struct pci_bus *bus,
+ unsigned long type)
+{
+ int idx;
+ bool changed = false;
+ struct pci_dev *dev;
+ struct resource *r;
+ unsigned long type_mask = IORESOURCE_IO | IORESOURCE_MEM |
+ IORESOURCE_PREFETCH;
+
+ dev = bus->self;
+ for (idx = PCI_BRIDGE_RESOURCES; idx <= PCI_BRIDGE_RESOURCE_END;
+ idx++) {
+ r = &dev->resource[idx];
+ if ((r->flags & type_mask) != type)
+ continue;
+ if (!r->parent)
+ continue;
+ /*
+ * if there are children under that, we should release them
+ * all
+ */
+ release_child_resources(r);
+ if (!release_resource(r)) {
+ dev_printk(KERN_DEBUG, &dev->dev,
+ "resource %d %pR released\n", idx, r);
+ /* keep the old size */
+ r->end = resource_size(r) - 1;
+ r->start = 0;
+ r->flags = 0;
+ changed = true;
+ }
+ }
+
+ if (changed) {
+ /* avoiding touch the one without PREF */
+ if (type & IORESOURCE_PREFETCH)
+ type = IORESOURCE_PREFETCH;
+ __pci_setup_bridge(bus, type);
+ }
+}
+
+enum release_type {
+ leaf_only,
+ whole_subtree,
+};
+/*
+ * try to release pci bridge resources that is from leaf bridge,
+ * so we can allocate big new one later
+ */
+static void __ref pci_bus_release_bridge_resources(struct pci_bus *bus,
+ unsigned long type,
+ enum release_type rel_type)
+{
+ struct pci_dev *dev;
+ bool is_leaf_bridge = true;
+
+ list_for_each_entry(dev, &bus->devices, bus_list) {
+ struct pci_bus *b = dev->subordinate;
+ if (!b)
+ continue;
+
+ is_leaf_bridge = false;
+
+ if ((dev->class >> 8) != PCI_CLASS_BRIDGE_PCI)
+ continue;
+
+ if (rel_type == whole_subtree)
+ pci_bus_release_bridge_resources(b, type,
+ whole_subtree);
+ }
+
+ if (pci_is_root_bus(bus))
+ return;
+
+ if ((bus->self->class >> 8) != PCI_CLASS_BRIDGE_PCI)
+ return;
+
+ if ((rel_type == whole_subtree) || is_leaf_bridge)
+ pci_bridge_release_resources(bus, type);
+}
+
static void pci_bus_dump_res(struct pci_bus *bus)
{
- int i;
+ struct resource *res;
+ int i;
- for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) {
- struct resource *res = bus->resource[i];
- if (!res || !res->end)
+ pci_bus_for_each_resource(bus, res, i) {
+ if (!res || !res->end || !res->flags)
continue;
dev_printk(KERN_DEBUG, &bus->dev, "resource %d %pR\n", i, res);
@@ -600,11 +830,65 @@
}
}
+static int __init pci_bus_get_depth(struct pci_bus *bus)
+{
+ int depth = 0;
+ struct pci_dev *dev;
+
+ list_for_each_entry(dev, &bus->devices, bus_list) {
+ int ret;
+ struct pci_bus *b = dev->subordinate;
+ if (!b)
+ continue;
+
+ ret = pci_bus_get_depth(b);
+ if (ret + 1 > depth)
+ depth = ret + 1;
+ }
+
+ return depth;
+}
+static int __init pci_get_max_depth(void)
+{
+ int depth = 0;
+ struct pci_bus *bus;
+
+ list_for_each_entry(bus, &pci_root_buses, node) {
+ int ret;
+
+ ret = pci_bus_get_depth(bus);
+ if (ret > depth)
+ depth = ret;
+ }
+
+ return depth;
+}
+
+/*
+ * first try will not touch pci bridge res
+ * second and later try will clear small leaf bridge res
+ * will stop till to the max deepth if can not find good one
+ */
void __init
pci_assign_unassigned_resources(void)
{
struct pci_bus *bus;
+ int tried_times = 0;
+ enum release_type rel_type = leaf_only;
+ struct resource_list_x head, *list;
+ unsigned long type_mask = IORESOURCE_IO | IORESOURCE_MEM |
+ IORESOURCE_PREFETCH;
+ unsigned long failed_type;
+ int max_depth = pci_get_max_depth();
+ int pci_try_num;
+ head.next = NULL;
+
+ pci_try_num = max_depth + 1;
+ printk(KERN_DEBUG "PCI: max bus depth: %d pci_try_num: %d\n",
+ max_depth, pci_try_num);
+
+again:
/* Depth first, calculate sizes and alignments of all
subordinate buses. */
list_for_each_entry(bus, &pci_root_buses, node) {
@@ -612,12 +896,130 @@
}
/* Depth last, allocate resources and update the hardware. */
list_for_each_entry(bus, &pci_root_buses, node) {
- pci_bus_assign_resources(bus);
- pci_enable_bridges(bus);
+ __pci_bus_assign_resources(bus, &head);
}
+ tried_times++;
+
+ /* any device complain? */
+ if (!head.next)
+ goto enable_and_dump;
+ failed_type = 0;
+ for (list = head.next; list;) {
+ failed_type |= list->flags;
+ list = list->next;
+ }
+ /*
+ * io port are tight, don't try extra
+ * or if reach the limit, don't want to try more
+ */
+ failed_type &= type_mask;
+ if ((failed_type == IORESOURCE_IO) || (tried_times >= pci_try_num)) {
+ free_failed_list(&head);
+ goto enable_and_dump;
+ }
+
+ printk(KERN_DEBUG "PCI: No. %d try to assign unassigned res\n",
+ tried_times + 1);
+
+ /* third times and later will not check if it is leaf */
+ if ((tried_times + 1) > 2)
+ rel_type = whole_subtree;
+
+ /*
+ * Try to release leaf bridge's resources that doesn't fit resource of
+ * child device under that bridge
+ */
+ for (list = head.next; list;) {
+ bus = list->dev->bus;
+ pci_bus_release_bridge_resources(bus, list->flags & type_mask,
+ rel_type);
+ list = list->next;
+ }
+ /* restore size and flags */
+ for (list = head.next; list;) {
+ struct resource *res = list->res;
+
+ res->start = list->start;
+ res->end = list->end;
+ res->flags = list->flags;
+ if (list->dev->subordinate)
+ res->flags = 0;
+
+ list = list->next;
+ }
+ free_failed_list(&head);
+
+ goto again;
+
+enable_and_dump:
+ /* Depth last, update the hardware. */
+ list_for_each_entry(bus, &pci_root_buses, node)
+ pci_enable_bridges(bus);
/* dump the resource on buses */
list_for_each_entry(bus, &pci_root_buses, node) {
pci_bus_dump_resources(bus);
}
}
+
+void pci_assign_unassigned_bridge_resources(struct pci_dev *bridge)
+{
+ struct pci_bus *parent = bridge->subordinate;
+ int tried_times = 0;
+ struct resource_list_x head, *list;
+ int retval;
+ unsigned long type_mask = IORESOURCE_IO | IORESOURCE_MEM |
+ IORESOURCE_PREFETCH;
+
+ head.next = NULL;
+
+again:
+ pci_bus_size_bridges(parent);
+ __pci_bridge_assign_resources(bridge, &head);
+ retval = pci_reenable_device(bridge);
+ pci_set_master(bridge);
+ pci_enable_bridges(parent);
+
+ tried_times++;
+
+ if (!head.next)
+ return;
+
+ if (tried_times >= 2) {
+ /* still fail, don't need to try more */
+ free_failed_list(&head);
+ return;
+ }
+
+ printk(KERN_DEBUG "PCI: No. %d try to assign unassigned res\n",
+ tried_times + 1);
+
+ /*
+ * Try to release leaf bridge's resources that doesn't fit resource of
+ * child device under that bridge
+ */
+ for (list = head.next; list;) {
+ struct pci_bus *bus = list->dev->bus;
+ unsigned long flags = list->flags;
+
+ pci_bus_release_bridge_resources(bus, flags & type_mask,
+ whole_subtree);
+ list = list->next;
+ }
+ /* restore size and flags */
+ for (list = head.next; list;) {
+ struct resource *res = list->res;
+
+ res->start = list->start;
+ res->end = list->end;
+ res->flags = list->flags;
+ if (list->dev->subordinate)
+ res->flags = 0;
+
+ list = list->next;
+ }
+ free_failed_list(&head);
+
+ goto again;
+}
+EXPORT_SYMBOL_GPL(pci_assign_unassigned_bridge_resources);
diff --git a/drivers/pci/slot.c b/drivers/pci/slot.c
index 8c02b6c..49c9e6c 100644
--- a/drivers/pci/slot.c
+++ b/drivers/pci/slot.c
@@ -47,6 +47,55 @@
slot->number);
}
+/* these strings match up with the values in pci_bus_speed */
+static char *pci_bus_speed_strings[] = {
+ "33 MHz PCI", /* 0x00 */
+ "66 MHz PCI", /* 0x01 */
+ "66 MHz PCI-X", /* 0x02 */
+ "100 MHz PCI-X", /* 0x03 */
+ "133 MHz PCI-X", /* 0x04 */
+ NULL, /* 0x05 */
+ NULL, /* 0x06 */
+ NULL, /* 0x07 */
+ NULL, /* 0x08 */
+ "66 MHz PCI-X 266", /* 0x09 */
+ "100 MHz PCI-X 266", /* 0x0a */
+ "133 MHz PCI-X 266", /* 0x0b */
+ "Unknown AGP", /* 0x0c */
+ "1x AGP", /* 0x0d */
+ "2x AGP", /* 0x0e */
+ "4x AGP", /* 0x0f */
+ "8x AGP", /* 0x10 */
+ "66 MHz PCI-X 533", /* 0x11 */
+ "100 MHz PCI-X 533", /* 0x12 */
+ "133 MHz PCI-X 533", /* 0x13 */
+ "2.5 GT/s PCIe", /* 0x14 */
+ "5.0 GT/s PCIe", /* 0x15 */
+ "8.0 GT/s PCIe", /* 0x16 */
+};
+
+static ssize_t bus_speed_read(enum pci_bus_speed speed, char *buf)
+{
+ const char *speed_string;
+
+ if (speed < ARRAY_SIZE(pci_bus_speed_strings))
+ speed_string = pci_bus_speed_strings[speed];
+ else
+ speed_string = "Unknown";
+
+ return sprintf(buf, "%s\n", speed_string);
+}
+
+static ssize_t max_speed_read_file(struct pci_slot *slot, char *buf)
+{
+ return bus_speed_read(slot->bus->max_bus_speed, buf);
+}
+
+static ssize_t cur_speed_read_file(struct pci_slot *slot, char *buf)
+{
+ return bus_speed_read(slot->bus->cur_bus_speed, buf);
+}
+
static void pci_slot_release(struct kobject *kobj)
{
struct pci_dev *dev;
@@ -66,9 +115,15 @@
static struct pci_slot_attribute pci_slot_attr_address =
__ATTR(address, (S_IFREG | S_IRUGO), address_read_file, NULL);
+static struct pci_slot_attribute pci_slot_attr_max_speed =
+ __ATTR(max_bus_speed, (S_IFREG | S_IRUGO), max_speed_read_file, NULL);
+static struct pci_slot_attribute pci_slot_attr_cur_speed =
+ __ATTR(cur_bus_speed, (S_IFREG | S_IRUGO), cur_speed_read_file, NULL);
static struct attribute *pci_slot_default_attrs[] = {
&pci_slot_attr_address.attr,
+ &pci_slot_attr_max_speed.attr,
+ &pci_slot_attr_cur_speed.attr,
NULL,
};
diff --git a/drivers/pcmcia/rsrc_mgr.c b/drivers/pcmcia/rsrc_mgr.c
index 52db172..f8401a0 100644
--- a/drivers/pcmcia/rsrc_mgr.c
+++ b/drivers/pcmcia/rsrc_mgr.c
@@ -114,22 +114,21 @@
unsigned long offset;
};
-static void pcmcia_align(void *align_data, struct resource *res,
- unsigned long size, unsigned long align)
+static resource_size_t pcmcia_align(void *align_data,
+ const struct resource *res,
+ resource_size_t size, resource_size_t align)
{
struct pcmcia_align_data *data = align_data;
- unsigned long start;
+ resource_size_t start;
start = (res->start & ~data->mask) + data->offset;
if (start < res->start)
start += data->mask + 1;
- res->start = start;
#ifdef CONFIG_X86
if (res->flags & IORESOURCE_IO) {
if (start & 0x300) {
start = (start + 0x3ff) & ~0x3ff;
- res->start = start;
}
}
#endif
@@ -137,9 +136,11 @@
#ifdef CONFIG_M68K
if (res->flags & IORESOURCE_IO) {
if ((res->start + size - 1) >= 1024)
- res->start = res->end;
+ start = res->end;
}
#endif
+
+ return start;
}
diff --git a/drivers/pcmcia/rsrc_nonstatic.c b/drivers/pcmcia/rsrc_nonstatic.c
index 9b0dc43..c67638f 100644
--- a/drivers/pcmcia/rsrc_nonstatic.c
+++ b/drivers/pcmcia/rsrc_nonstatic.c
@@ -533,8 +533,8 @@
struct resource_map *map;
};
-static void
-pcmcia_common_align(void *align_data, struct resource *res,
+static resource_size_t
+pcmcia_common_align(void *align_data, const struct resource *res,
resource_size_t size, resource_size_t align)
{
struct pcmcia_align_data *data = align_data;
@@ -545,17 +545,18 @@
start = (res->start & ~data->mask) + data->offset;
if (start < res->start)
start += data->mask + 1;
- res->start = start;
+ return start;
}
-static void
-pcmcia_align(void *align_data, struct resource *res, resource_size_t size,
- resource_size_t align)
+static resource_size_t
+pcmcia_align(void *align_data, const struct resource *res,
+ resource_size_t size, resource_size_t align)
{
struct pcmcia_align_data *data = align_data;
struct resource_map *m;
+ resource_size_t start;
- pcmcia_common_align(data, res, size, align);
+ start = pcmcia_common_align(data, res, size, align);
for (m = data->map->next; m != data->map; m = m->next) {
unsigned long start = m->base;
@@ -567,8 +568,7 @@
* fit here.
*/
if (res->start < start) {
- res->start = start;
- pcmcia_common_align(data, res, size, align);
+ start = pcmcia_common_align(data, res, size, align);
}
/*
@@ -586,7 +586,9 @@
* If we failed to find something suitable, ensure we fail.
*/
if (m == data->map)
- res->start = res->end;
+ start = res->end;
+
+ return start;
}
/*
@@ -801,8 +803,7 @@
return -EINVAL;
#endif
- for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) {
- res = s->cb_dev->bus->resource[i];
+ pci_bus_for_each_resource(s->cb_dev->bus, res, i) {
if (!res)
continue;
diff --git a/drivers/pcmcia/yenta_socket.c b/drivers/pcmcia/yenta_socket.c
index e4d12ac..1f2039d 100644
--- a/drivers/pcmcia/yenta_socket.c
+++ b/drivers/pcmcia/yenta_socket.c
@@ -649,9 +649,10 @@
static int yenta_search_res(struct yenta_socket *socket, struct resource *res,
u32 min)
{
+ struct resource *root;
int i;
- for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) {
- struct resource *root = socket->dev->bus->resource[i];
+
+ pci_bus_for_each_resource(socket->dev->bus, root, i) {
if (!root)
continue;
diff --git a/drivers/s390/scsi/zfcp_aux.c b/drivers/s390/scsi/zfcp_aux.c
index 9d0c941..66d6c01 100644
--- a/drivers/s390/scsi/zfcp_aux.c
+++ b/drivers/s390/scsi/zfcp_aux.c
@@ -3,7 +3,7 @@
*
* Module interface and handling of zfcp data structures.
*
- * Copyright IBM Corporation 2002, 2009
+ * Copyright IBM Corporation 2002, 2010
*/
/*
@@ -32,6 +32,7 @@
#include <linux/seq_file.h>
#include "zfcp_ext.h"
#include "zfcp_fc.h"
+#include "zfcp_reqlist.h"
#define ZFCP_BUS_ID_SIZE 20
@@ -49,36 +50,6 @@
return kmem_cache_create(name, size, roundup_pow_of_two(size), 0, NULL);
}
-static int zfcp_reqlist_alloc(struct zfcp_adapter *adapter)
-{
- int idx;
-
- adapter->req_list = kcalloc(REQUEST_LIST_SIZE, sizeof(struct list_head),
- GFP_KERNEL);
- if (!adapter->req_list)
- return -ENOMEM;
-
- for (idx = 0; idx < REQUEST_LIST_SIZE; idx++)
- INIT_LIST_HEAD(&adapter->req_list[idx]);
- return 0;
-}
-
-/**
- * zfcp_reqlist_isempty - is the request list empty
- * @adapter: pointer to struct zfcp_adapter
- *
- * Returns: true if list is empty, false otherwise
- */
-int zfcp_reqlist_isempty(struct zfcp_adapter *adapter)
-{
- unsigned int idx;
-
- for (idx = 0; idx < REQUEST_LIST_SIZE; idx++)
- if (!list_empty(&adapter->req_list[idx]))
- return 0;
- return 1;
-}
-
static void __init zfcp_init_device_configure(char *busid, u64 wwpn, u64 lun)
{
struct ccw_device *cdev;
@@ -110,7 +81,7 @@
flush_work(&unit->scsi_work);
out_unit:
- put_device(&port->sysfs_device);
+ put_device(&port->dev);
out_port:
zfcp_ccw_adapter_put(adapter);
out_ccw_device:
@@ -255,7 +226,7 @@
read_lock_irqsave(&port->unit_list_lock, flags);
list_for_each_entry(unit, &port->unit_list, list)
if (unit->fcp_lun == fcp_lun) {
- if (!get_device(&unit->sysfs_device))
+ if (!get_device(&unit->dev))
unit = NULL;
read_unlock_irqrestore(&port->unit_list_lock, flags);
return unit;
@@ -280,7 +251,7 @@
read_lock_irqsave(&adapter->port_list_lock, flags);
list_for_each_entry(port, &adapter->port_list, list)
if (port->wwpn == wwpn) {
- if (!get_device(&port->sysfs_device))
+ if (!get_device(&port->dev))
port = NULL;
read_unlock_irqrestore(&adapter->port_list_lock, flags);
return port;
@@ -298,10 +269,9 @@
*/
static void zfcp_unit_release(struct device *dev)
{
- struct zfcp_unit *unit = container_of(dev, struct zfcp_unit,
- sysfs_device);
+ struct zfcp_unit *unit = container_of(dev, struct zfcp_unit, dev);
- put_device(&unit->port->sysfs_device);
+ put_device(&unit->port->dev);
kfree(unit);
}
@@ -318,11 +288,11 @@
struct zfcp_unit *unit;
int retval = -ENOMEM;
- get_device(&port->sysfs_device);
+ get_device(&port->dev);
unit = zfcp_get_unit_by_lun(port, fcp_lun);
if (unit) {
- put_device(&unit->sysfs_device);
+ put_device(&unit->dev);
retval = -EEXIST;
goto err_out;
}
@@ -333,10 +303,10 @@
unit->port = port;
unit->fcp_lun = fcp_lun;
- unit->sysfs_device.parent = &port->sysfs_device;
- unit->sysfs_device.release = zfcp_unit_release;
+ unit->dev.parent = &port->dev;
+ unit->dev.release = zfcp_unit_release;
- if (dev_set_name(&unit->sysfs_device, "0x%016llx",
+ if (dev_set_name(&unit->dev, "0x%016llx",
(unsigned long long) fcp_lun)) {
kfree(unit);
goto err_out;
@@ -353,13 +323,12 @@
unit->latencies.cmd.channel.min = 0xFFFFFFFF;
unit->latencies.cmd.fabric.min = 0xFFFFFFFF;
- if (device_register(&unit->sysfs_device)) {
- put_device(&unit->sysfs_device);
+ if (device_register(&unit->dev)) {
+ put_device(&unit->dev);
goto err_out;
}
- if (sysfs_create_group(&unit->sysfs_device.kobj,
- &zfcp_sysfs_unit_attrs))
+ if (sysfs_create_group(&unit->dev.kobj, &zfcp_sysfs_unit_attrs))
goto err_out_put;
write_lock_irq(&port->unit_list_lock);
@@ -371,9 +340,9 @@
return unit;
err_out_put:
- device_unregister(&unit->sysfs_device);
+ device_unregister(&unit->dev);
err_out:
- put_device(&port->sysfs_device);
+ put_device(&port->dev);
return ERR_PTR(retval);
}
@@ -539,7 +508,8 @@
if (zfcp_allocate_low_mem_buffers(adapter))
goto failed;
- if (zfcp_reqlist_alloc(adapter))
+ adapter->req_list = zfcp_reqlist_alloc();
+ if (!adapter->req_list)
goto failed;
if (zfcp_dbf_adapter_register(adapter))
@@ -560,8 +530,6 @@
INIT_LIST_HEAD(&adapter->erp_ready_head);
INIT_LIST_HEAD(&adapter->erp_running_head);
- spin_lock_init(&adapter->req_list_lock);
-
rwlock_init(&adapter->erp_lock);
rwlock_init(&adapter->abort_lock);
@@ -640,8 +608,7 @@
static void zfcp_port_release(struct device *dev)
{
- struct zfcp_port *port = container_of(dev, struct zfcp_port,
- sysfs_device);
+ struct zfcp_port *port = container_of(dev, struct zfcp_port, dev);
zfcp_ccw_adapter_put(port->adapter);
kfree(port);
@@ -669,7 +636,7 @@
port = zfcp_get_port_by_wwpn(adapter, wwpn);
if (port) {
- put_device(&port->sysfs_device);
+ put_device(&port->dev);
retval = -EEXIST;
goto err_out;
}
@@ -689,22 +656,21 @@
port->d_id = d_id;
port->wwpn = wwpn;
port->rport_task = RPORT_NONE;
- port->sysfs_device.parent = &adapter->ccw_device->dev;
- port->sysfs_device.release = zfcp_port_release;
+ port->dev.parent = &adapter->ccw_device->dev;
+ port->dev.release = zfcp_port_release;
- if (dev_set_name(&port->sysfs_device, "0x%016llx",
- (unsigned long long)wwpn)) {
+ if (dev_set_name(&port->dev, "0x%016llx", (unsigned long long)wwpn)) {
kfree(port);
goto err_out;
}
retval = -EINVAL;
- if (device_register(&port->sysfs_device)) {
- put_device(&port->sysfs_device);
+ if (device_register(&port->dev)) {
+ put_device(&port->dev);
goto err_out;
}
- if (sysfs_create_group(&port->sysfs_device.kobj,
+ if (sysfs_create_group(&port->dev.kobj,
&zfcp_sysfs_port_attrs))
goto err_out_put;
@@ -717,7 +683,7 @@
return port;
err_out_put:
- device_unregister(&port->sysfs_device);
+ device_unregister(&port->dev);
err_out:
zfcp_ccw_adapter_put(adapter);
return ERR_PTR(retval);
diff --git a/drivers/s390/scsi/zfcp_ccw.c b/drivers/s390/scsi/zfcp_ccw.c
index c22cb72..ce1cc7a 100644
--- a/drivers/s390/scsi/zfcp_ccw.c
+++ b/drivers/s390/scsi/zfcp_ccw.c
@@ -3,13 +3,14 @@
*
* Registration and callback for the s390 common I/O layer.
*
- * Copyright IBM Corporation 2002, 2009
+ * Copyright IBM Corporation 2002, 2010
*/
#define KMSG_COMPONENT "zfcp"
#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
#include "zfcp_ext.h"
+#include "zfcp_reqlist.h"
#define ZFCP_MODEL_PRIV 0x4
@@ -122,12 +123,10 @@
zfcp_ccw_adapter_put(adapter); /* put from zfcp_ccw_adapter_by_cdev */
list_for_each_entry_safe(unit, u, &unit_remove_lh, list)
- zfcp_device_unregister(&unit->sysfs_device,
- &zfcp_sysfs_unit_attrs);
+ zfcp_device_unregister(&unit->dev, &zfcp_sysfs_unit_attrs);
list_for_each_entry_safe(port, p, &port_remove_lh, list)
- zfcp_device_unregister(&port->sysfs_device,
- &zfcp_sysfs_port_attrs);
+ zfcp_device_unregister(&port->dev, &zfcp_sysfs_port_attrs);
zfcp_adapter_unregister(adapter);
}
@@ -162,7 +161,7 @@
}
/* initialize request counter */
- BUG_ON(!zfcp_reqlist_isempty(adapter));
+ BUG_ON(!zfcp_reqlist_isempty(adapter->req_list));
adapter->req_no = 0;
zfcp_erp_modify_adapter_status(adapter, "ccsonl1", NULL,
diff --git a/drivers/s390/scsi/zfcp_dbf.c b/drivers/s390/scsi/zfcp_dbf.c
index 7369c89..7a149fd 100644
--- a/drivers/s390/scsi/zfcp_dbf.c
+++ b/drivers/s390/scsi/zfcp_dbf.c
@@ -140,9 +140,9 @@
memcpy(response->fsf_status_qual,
fsf_status_qual, FSF_STATUS_QUALIFIER_SIZE);
response->fsf_req_status = fsf_req->status;
- response->sbal_first = fsf_req->queue_req.sbal_first;
- response->sbal_last = fsf_req->queue_req.sbal_last;
- response->sbal_response = fsf_req->queue_req.sbal_response;
+ response->sbal_first = fsf_req->qdio_req.sbal_first;
+ response->sbal_last = fsf_req->qdio_req.sbal_last;
+ response->sbal_response = fsf_req->qdio_req.sbal_response;
response->pool = fsf_req->pool != NULL;
response->erp_action = (unsigned long)fsf_req->erp_action;
@@ -576,7 +576,8 @@
struct zfcp_adapter *adapter = dbf->adapter;
zfcp_dbf_rec_target(id, ref, dbf, &adapter->status,
- &adapter->erp_counter, 0, 0, 0);
+ &adapter->erp_counter, 0, 0,
+ ZFCP_DBF_INVALID_LUN);
}
/**
@@ -590,8 +591,8 @@
struct zfcp_dbf *dbf = port->adapter->dbf;
zfcp_dbf_rec_target(id, ref, dbf, &port->status,
- &port->erp_counter, port->wwpn, port->d_id,
- 0);
+ &port->erp_counter, port->wwpn, port->d_id,
+ ZFCP_DBF_INVALID_LUN);
}
/**
@@ -642,10 +643,9 @@
r->u.trigger.ps = atomic_read(&port->status);
r->u.trigger.wwpn = port->wwpn;
}
- if (unit) {
+ if (unit)
r->u.trigger.us = atomic_read(&unit->status);
- r->u.trigger.fcp_lun = unit->fcp_lun;
- }
+ r->u.trigger.fcp_lun = unit ? unit->fcp_lun : ZFCP_DBF_INVALID_LUN;
debug_event(dbf->rec, action ? 1 : 4, r, sizeof(*r));
spin_unlock_irqrestore(&dbf->rec_lock, flags);
}
@@ -668,7 +668,7 @@
r->u.action.action = (unsigned long)erp_action;
r->u.action.status = erp_action->status;
r->u.action.step = erp_action->step;
- r->u.action.fsf_req = (unsigned long)erp_action->fsf_req;
+ r->u.action.fsf_req = erp_action->fsf_req_id;
debug_event(dbf->rec, 5, r, sizeof(*r));
spin_unlock_irqrestore(&dbf->rec_lock, flags);
}
diff --git a/drivers/s390/scsi/zfcp_dbf.h b/drivers/s390/scsi/zfcp_dbf.h
index 8b7fd9a..457e046 100644
--- a/drivers/s390/scsi/zfcp_dbf.h
+++ b/drivers/s390/scsi/zfcp_dbf.h
@@ -30,6 +30,8 @@
#define ZFCP_DBF_TAG_SIZE 4
#define ZFCP_DBF_ID_SIZE 7
+#define ZFCP_DBF_INVALID_LUN 0xFFFFFFFFFFFFFFFFull
+
struct zfcp_dbf_dump {
u8 tag[ZFCP_DBF_TAG_SIZE];
u32 total_size; /* size of total dump data */
@@ -192,10 +194,10 @@
struct zfcp_dbf_san_record_ct_response ct_resp;
struct zfcp_dbf_san_record_els els;
} u;
-#define ZFCP_DBF_SAN_MAX_PAYLOAD 1024
- u8 payload[32];
} __attribute__ ((packed));
+#define ZFCP_DBF_SAN_MAX_PAYLOAD 1024
+
struct zfcp_dbf_scsi_record {
u8 tag[ZFCP_DBF_TAG_SIZE];
u8 tag2[ZFCP_DBF_TAG_SIZE];
@@ -301,17 +303,31 @@
/**
* zfcp_dbf_scsi_result - trace event for SCSI command completion
- * @tag: tag indicating success or failure of SCSI command
- * @level: trace level applicable for this event
- * @adapter: adapter that has been used to issue the SCSI command
+ * @dbf: adapter dbf trace
* @scmd: SCSI command pointer
- * @fsf_req: request used to issue SCSI command (might be NULL)
+ * @req: FSF request used to issue SCSI command
*/
static inline
-void zfcp_dbf_scsi_result(const char *tag, int level, struct zfcp_dbf *dbf,
- struct scsi_cmnd *scmd, struct zfcp_fsf_req *fsf_req)
+void zfcp_dbf_scsi_result(struct zfcp_dbf *dbf, struct scsi_cmnd *scmd,
+ struct zfcp_fsf_req *req)
{
- zfcp_dbf_scsi("rslt", tag, level, dbf, scmd, fsf_req, 0);
+ if (scmd->result != 0)
+ zfcp_dbf_scsi("rslt", "erro", 3, dbf, scmd, req, 0);
+ else if (scmd->retries > 0)
+ zfcp_dbf_scsi("rslt", "retr", 4, dbf, scmd, req, 0);
+ else
+ zfcp_dbf_scsi("rslt", "norm", 6, dbf, scmd, req, 0);
+}
+
+/**
+ * zfcp_dbf_scsi_fail_send - trace event for failure to send SCSI command
+ * @dbf: adapter dbf trace
+ * @scmd: SCSI command pointer
+ */
+static inline
+void zfcp_dbf_scsi_fail_send(struct zfcp_dbf *dbf, struct scsi_cmnd *scmd)
+{
+ zfcp_dbf_scsi("rslt", "fail", 4, dbf, scmd, NULL, 0);
}
/**
diff --git a/drivers/s390/scsi/zfcp_def.h b/drivers/s390/scsi/zfcp_def.h
index e1b5b88..7131c7d 100644
--- a/drivers/s390/scsi/zfcp_def.h
+++ b/drivers/s390/scsi/zfcp_def.h
@@ -3,7 +3,7 @@
*
* Global definitions for the zfcp device driver.
*
- * Copyright IBM Corporation 2002, 2009
+ * Copyright IBM Corporation 2002, 2010
*/
#ifndef ZFCP_DEF_H
@@ -33,15 +33,13 @@
#include <scsi/scsi_transport_fc.h>
#include <scsi/scsi_bsg_fc.h>
#include <asm/ccwdev.h>
-#include <asm/qdio.h>
#include <asm/debug.h>
#include <asm/ebcdic.h>
#include <asm/sysinfo.h>
#include "zfcp_fsf.h"
+#include "zfcp_qdio.h"
-/********************* GENERAL DEFINES *********************************/
-
-#define REQUEST_LIST_SIZE 128
+struct zfcp_reqlist;
/********************* SCSI SPECIFIC DEFINES *********************************/
#define ZFCP_SCSI_ER_TIMEOUT (10*HZ)
@@ -129,12 +127,6 @@
mempool_t *qtcb_pool;
};
-struct zfcp_qdio_queue {
- struct qdio_buffer *sbal[QDIO_MAX_BUFFERS_PER_Q];
- u8 first; /* index of next free bfr in queue */
- atomic_t count; /* number of free buffers in queue */
-};
-
struct zfcp_erp_action {
struct list_head list;
int action; /* requested action code */
@@ -143,8 +135,7 @@
struct zfcp_unit *unit;
u32 status; /* recovery status */
u32 step; /* active step of this erp action */
- struct zfcp_fsf_req *fsf_req; /* fsf request currently pending
- for this action */
+ unsigned long fsf_req_id;
struct timer_list timer;
};
@@ -167,29 +158,6 @@
spinlock_t lock;
};
-/** struct zfcp_qdio - basic QDIO data structure
- * @resp_q: response queue
- * @req_q: request queue
- * @stat_lock: lock to protect req_q_util and req_q_time
- * @req_q_lock; lock to serialize access to request queue
- * @req_q_time: time of last fill level change
- * @req_q_util: used for accounting
- * @req_q_full: queue full incidents
- * @req_q_wq: used to wait for SBAL availability
- * @adapter: adapter used in conjunction with this QDIO structure
- */
-struct zfcp_qdio {
- struct zfcp_qdio_queue resp_q;
- struct zfcp_qdio_queue req_q;
- spinlock_t stat_lock;
- spinlock_t req_q_lock;
- unsigned long long req_q_time;
- u64 req_q_util;
- atomic_t req_q_full;
- wait_queue_head_t req_q_wq;
- struct zfcp_adapter *adapter;
-};
-
struct zfcp_adapter {
struct kref ref;
u64 peer_wwnn; /* P2P peer WWNN */
@@ -207,8 +175,7 @@
struct list_head port_list; /* remote port list */
rwlock_t port_list_lock; /* port list lock */
unsigned long req_no; /* unique FSF req number */
- struct list_head *req_list; /* list of pending reqs */
- spinlock_t req_list_lock; /* request list lock */
+ struct zfcp_reqlist *req_list;
u32 fsf_req_seq_no; /* FSF cmnd seq number */
rwlock_t abort_lock; /* Protects against SCSI
stack abort/command
@@ -241,7 +208,7 @@
};
struct zfcp_port {
- struct device sysfs_device; /* sysfs device */
+ struct device dev;
struct fc_rport *rport; /* rport of fc transport class */
struct list_head list; /* list of remote ports */
struct zfcp_adapter *adapter; /* adapter used to access port */
@@ -263,7 +230,7 @@
};
struct zfcp_unit {
- struct device sysfs_device; /* sysfs device */
+ struct device dev;
struct list_head list; /* list of logical units */
struct zfcp_port *port; /* remote port of unit */
atomic_t status; /* status of this logical unit */
@@ -277,33 +244,11 @@
};
/**
- * struct zfcp_queue_req - queue related values for a request
- * @sbal_number: number of free SBALs
- * @sbal_first: first SBAL for this request
- * @sbal_last: last SBAL for this request
- * @sbal_limit: last possible SBAL for this request
- * @sbale_curr: current SBALE at creation of this request
- * @sbal_response: SBAL used in interrupt
- * @qdio_outb_usage: usage of outbound queue
- * @qdio_inb_usage: usage of inbound queue
- */
-struct zfcp_queue_req {
- u8 sbal_number;
- u8 sbal_first;
- u8 sbal_last;
- u8 sbal_limit;
- u8 sbale_curr;
- u8 sbal_response;
- u16 qdio_outb_usage;
- u16 qdio_inb_usage;
-};
-
-/**
* struct zfcp_fsf_req - basic FSF request structure
* @list: list of FSF requests
* @req_id: unique request ID
* @adapter: adapter this request belongs to
- * @queue_req: queue related values
+ * @qdio_req: qdio queue related values
* @completion: used to signal the completion of the request
* @status: status of the request
* @fsf_command: FSF command issued
@@ -321,7 +266,7 @@
struct list_head list;
unsigned long req_id;
struct zfcp_adapter *adapter;
- struct zfcp_queue_req queue_req;
+ struct zfcp_qdio_req qdio_req;
struct completion completion;
u32 status;
u32 fsf_command;
@@ -352,45 +297,4 @@
#define ZFCP_SET 0x00000100
#define ZFCP_CLEAR 0x00000200
-/*
- * Helper functions for request ID management.
- */
-static inline int zfcp_reqlist_hash(unsigned long req_id)
-{
- return req_id % REQUEST_LIST_SIZE;
-}
-
-static inline void zfcp_reqlist_remove(struct zfcp_adapter *adapter,
- struct zfcp_fsf_req *fsf_req)
-{
- list_del(&fsf_req->list);
-}
-
-static inline struct zfcp_fsf_req *
-zfcp_reqlist_find(struct zfcp_adapter *adapter, unsigned long req_id)
-{
- struct zfcp_fsf_req *request;
- unsigned int idx;
-
- idx = zfcp_reqlist_hash(req_id);
- list_for_each_entry(request, &adapter->req_list[idx], list)
- if (request->req_id == req_id)
- return request;
- return NULL;
-}
-
-static inline struct zfcp_fsf_req *
-zfcp_reqlist_find_safe(struct zfcp_adapter *adapter, struct zfcp_fsf_req *req)
-{
- struct zfcp_fsf_req *request;
- unsigned int idx;
-
- for (idx = 0; idx < REQUEST_LIST_SIZE; idx++) {
- list_for_each_entry(request, &adapter->req_list[idx], list)
- if (request == req)
- return request;
- }
- return NULL;
-}
-
#endif /* ZFCP_DEF_H */
diff --git a/drivers/s390/scsi/zfcp_erp.c b/drivers/s390/scsi/zfcp_erp.c
index b51a11a..0be5e7e 100644
--- a/drivers/s390/scsi/zfcp_erp.c
+++ b/drivers/s390/scsi/zfcp_erp.c
@@ -3,7 +3,7 @@
*
* Error Recovery Procedures (ERP).
*
- * Copyright IBM Corporation 2002, 2009
+ * Copyright IBM Corporation 2002, 2010
*/
#define KMSG_COMPONENT "zfcp"
@@ -11,6 +11,7 @@
#include <linux/kthread.h>
#include "zfcp_ext.h"
+#include "zfcp_reqlist.h"
#define ZFCP_MAX_ERPS 3
@@ -174,7 +175,7 @@
switch (need) {
case ZFCP_ERP_ACTION_REOPEN_UNIT:
- if (!get_device(&unit->sysfs_device))
+ if (!get_device(&unit->dev))
return NULL;
atomic_set_mask(ZFCP_STATUS_COMMON_ERP_INUSE, &unit->status);
erp_action = &unit->erp_action;
@@ -184,7 +185,7 @@
case ZFCP_ERP_ACTION_REOPEN_PORT:
case ZFCP_ERP_ACTION_REOPEN_PORT_FORCED:
- if (!get_device(&port->sysfs_device))
+ if (!get_device(&port->dev))
return NULL;
zfcp_erp_action_dismiss_port(port);
atomic_set_mask(ZFCP_STATUS_COMMON_ERP_INUSE, &port->status);
@@ -478,26 +479,27 @@
static void zfcp_erp_strategy_check_fsfreq(struct zfcp_erp_action *act)
{
struct zfcp_adapter *adapter = act->adapter;
+ struct zfcp_fsf_req *req;
- if (!act->fsf_req)
+ if (!act->fsf_req_id)
return;
- spin_lock(&adapter->req_list_lock);
- if (zfcp_reqlist_find_safe(adapter, act->fsf_req) &&
- act->fsf_req->erp_action == act) {
+ spin_lock(&adapter->req_list->lock);
+ req = _zfcp_reqlist_find(adapter->req_list, act->fsf_req_id);
+ if (req && req->erp_action == act) {
if (act->status & (ZFCP_STATUS_ERP_DISMISSED |
ZFCP_STATUS_ERP_TIMEDOUT)) {
- act->fsf_req->status |= ZFCP_STATUS_FSFREQ_DISMISSED;
+ req->status |= ZFCP_STATUS_FSFREQ_DISMISSED;
zfcp_dbf_rec_action("erscf_1", act);
- act->fsf_req->erp_action = NULL;
+ req->erp_action = NULL;
}
if (act->status & ZFCP_STATUS_ERP_TIMEDOUT)
zfcp_dbf_rec_action("erscf_2", act);
- if (act->fsf_req->status & ZFCP_STATUS_FSFREQ_DISMISSED)
- act->fsf_req = NULL;
+ if (req->status & ZFCP_STATUS_FSFREQ_DISMISSED)
+ act->fsf_req_id = 0;
} else
- act->fsf_req = NULL;
- spin_unlock(&adapter->req_list_lock);
+ act->fsf_req_id = 0;
+ spin_unlock(&adapter->req_list->lock);
}
/**
@@ -1179,19 +1181,19 @@
switch (act->action) {
case ZFCP_ERP_ACTION_REOPEN_UNIT:
if ((result == ZFCP_ERP_SUCCEEDED) && !unit->device) {
- get_device(&unit->sysfs_device);
+ get_device(&unit->dev);
if (scsi_queue_work(unit->port->adapter->scsi_host,
&unit->scsi_work) <= 0)
- put_device(&unit->sysfs_device);
+ put_device(&unit->dev);
}
- put_device(&unit->sysfs_device);
+ put_device(&unit->dev);
break;
case ZFCP_ERP_ACTION_REOPEN_PORT_FORCED:
case ZFCP_ERP_ACTION_REOPEN_PORT:
if (result == ZFCP_ERP_SUCCEEDED)
zfcp_scsi_schedule_rport_register(port);
- put_device(&port->sysfs_device);
+ put_device(&port->dev);
break;
case ZFCP_ERP_ACTION_REOPEN_ADAPTER:
diff --git a/drivers/s390/scsi/zfcp_ext.h b/drivers/s390/scsi/zfcp_ext.h
index 66bdb34..8786a79 100644
--- a/drivers/s390/scsi/zfcp_ext.h
+++ b/drivers/s390/scsi/zfcp_ext.h
@@ -21,7 +21,6 @@
extern struct zfcp_port *zfcp_port_enqueue(struct zfcp_adapter *, u64, u32,
u32);
extern struct zfcp_unit *zfcp_unit_enqueue(struct zfcp_port *, u64);
-extern int zfcp_reqlist_isempty(struct zfcp_adapter *);
extern void zfcp_sg_free_table(struct scatterlist *, int);
extern int zfcp_sg_setup_table(struct scatterlist *, int);
extern void zfcp_device_unregister(struct device *,
@@ -144,13 +143,9 @@
/* zfcp_qdio.c */
extern int zfcp_qdio_setup(struct zfcp_adapter *);
extern void zfcp_qdio_destroy(struct zfcp_qdio *);
-extern int zfcp_qdio_send(struct zfcp_qdio *, struct zfcp_queue_req *);
-extern struct qdio_buffer_element
- *zfcp_qdio_sbale_req(struct zfcp_qdio *, struct zfcp_queue_req *);
-extern struct qdio_buffer_element
- *zfcp_qdio_sbale_curr(struct zfcp_qdio *, struct zfcp_queue_req *);
+extern int zfcp_qdio_send(struct zfcp_qdio *, struct zfcp_qdio_req *);
extern int zfcp_qdio_sbals_from_sg(struct zfcp_qdio *,
- struct zfcp_queue_req *, unsigned long,
+ struct zfcp_qdio_req *, unsigned long,
struct scatterlist *, int);
extern int zfcp_qdio_open(struct zfcp_qdio *);
extern void zfcp_qdio_close(struct zfcp_qdio *);
diff --git a/drivers/s390/scsi/zfcp_fc.c b/drivers/s390/scsi/zfcp_fc.c
index 271399f..5219670 100644
--- a/drivers/s390/scsi/zfcp_fc.c
+++ b/drivers/s390/scsi/zfcp_fc.c
@@ -3,7 +3,7 @@
*
* Fibre Channel related functions for the zfcp device driver.
*
- * Copyright IBM Corporation 2008, 2009
+ * Copyright IBM Corporation 2008, 2010
*/
#define KMSG_COMPONENT "zfcp"
@@ -316,7 +316,7 @@
zfcp_erp_port_reopen(port, 0, "fcgpn_3", NULL);
out:
- put_device(&port->sysfs_device);
+ put_device(&port->dev);
}
/**
@@ -325,9 +325,9 @@
*/
void zfcp_fc_trigger_did_lookup(struct zfcp_port *port)
{
- get_device(&port->sysfs_device);
+ get_device(&port->dev);
if (!queue_work(port->adapter->work_queue, &port->gid_pn_work))
- put_device(&port->sysfs_device);
+ put_device(&port->dev);
}
/**
@@ -389,7 +389,7 @@
zfcp_scsi_schedule_rport_register(port);
out:
atomic_clear_mask(ZFCP_STATUS_PORT_LINK_TEST, &port->status);
- put_device(&port->sysfs_device);
+ put_device(&port->dev);
kmem_cache_free(zfcp_data.adisc_cache, adisc);
}
@@ -436,7 +436,7 @@
container_of(work, struct zfcp_port, test_link_work);
int retval;
- get_device(&port->sysfs_device);
+ get_device(&port->dev);
port->rport_task = RPORT_DEL;
zfcp_scsi_rport_work(&port->rport_work);
@@ -455,7 +455,7 @@
zfcp_erp_port_forced_reopen(port, 0, "fcltwk1", NULL);
out:
- put_device(&port->sysfs_device);
+ put_device(&port->dev);
}
/**
@@ -468,9 +468,9 @@
*/
void zfcp_fc_test_link(struct zfcp_port *port)
{
- get_device(&port->sysfs_device);
+ get_device(&port->dev);
if (!queue_work(port->adapter->work_queue, &port->test_link_work))
- put_device(&port->sysfs_device);
+ put_device(&port->dev);
}
static void zfcp_free_sg_env(struct zfcp_fc_gpn_ft *gpn_ft, int buf_num)
@@ -617,8 +617,7 @@
list_for_each_entry_safe(port, tmp, &remove_lh, list) {
zfcp_erp_port_shutdown(port, 0, "fcegpf2", NULL);
- zfcp_device_unregister(&port->sysfs_device,
- &zfcp_sysfs_port_attrs);
+ zfcp_device_unregister(&port->dev, &zfcp_sysfs_port_attrs);
}
return ret;
@@ -731,7 +730,7 @@
return -EINVAL;
d_id = port->d_id;
- put_device(&port->sysfs_device);
+ put_device(&port->dev);
} else
d_id = ntoh24(job->request->rqst_data.h_els.port_id);
diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c
index e8fb4d9..6538742 100644
--- a/drivers/s390/scsi/zfcp_fsf.c
+++ b/drivers/s390/scsi/zfcp_fsf.c
@@ -3,7 +3,7 @@
*
* Implementation of FSF commands.
*
- * Copyright IBM Corporation 2002, 2009
+ * Copyright IBM Corporation 2002, 2010
*/
#define KMSG_COMPONENT "zfcp"
@@ -14,6 +14,8 @@
#include "zfcp_ext.h"
#include "zfcp_fc.h"
#include "zfcp_dbf.h"
+#include "zfcp_qdio.h"
+#include "zfcp_reqlist.h"
static void zfcp_fsf_request_timeout_handler(unsigned long data)
{
@@ -393,7 +395,7 @@
case FSF_PROT_LINK_DOWN:
zfcp_fsf_link_down_info_eval(req, "fspse_5",
&psq->link_down_info);
- /* FIXME: reopening adapter now? better wait for link up */
+ /* go through reopen to flush pending requests */
zfcp_erp_adapter_reopen(adapter, 0, "fspse_6", req);
break;
case FSF_PROT_REEST_QUEUE:
@@ -457,15 +459,10 @@
void zfcp_fsf_req_dismiss_all(struct zfcp_adapter *adapter)
{
struct zfcp_fsf_req *req, *tmp;
- unsigned long flags;
LIST_HEAD(remove_queue);
- unsigned int i;
BUG_ON(atomic_read(&adapter->status) & ZFCP_STATUS_ADAPTER_QDIOUP);
- spin_lock_irqsave(&adapter->req_list_lock, flags);
- for (i = 0; i < REQUEST_LIST_SIZE; i++)
- list_splice_init(&adapter->req_list[i], &remove_queue);
- spin_unlock_irqrestore(&adapter->req_list_lock, flags);
+ zfcp_reqlist_move(adapter->req_list, &remove_queue);
list_for_each_entry_safe(req, tmp, &remove_queue, list) {
list_del(&req->list);
@@ -495,8 +492,6 @@
fc_host_port_id(shost) = ntoh24(bottom->s_id);
fc_host_speed(shost) = bottom->fc_link_speed;
fc_host_supported_classes(shost) = FC_COS_CLASS2 | FC_COS_CLASS3;
- fc_host_supported_fc4s(shost)[2] = 1; /* FCP */
- fc_host_active_fc4s(shost)[2] = 1; /* FCP */
adapter->hydra_version = bottom->adapter_type;
adapter->timer_ticks = bottom->timer_interval;
@@ -619,6 +614,10 @@
fc_host_permanent_port_name(shost) = fc_host_port_name(shost);
fc_host_maxframe_size(shost) = bottom->maximum_frame_size;
fc_host_supported_speeds(shost) = bottom->supported_speed;
+ memcpy(fc_host_supported_fc4s(shost), bottom->supported_fc4_types,
+ FC_FC4_LIST_SIZE);
+ memcpy(fc_host_active_fc4s(shost), bottom->active_fc4_types,
+ FC_FC4_LIST_SIZE);
}
static void zfcp_fsf_exchange_port_data_handler(struct zfcp_fsf_req *req)
@@ -725,12 +724,12 @@
req->adapter = adapter;
req->fsf_command = fsf_cmd;
req->req_id = adapter->req_no;
- req->queue_req.sbal_number = 1;
- req->queue_req.sbal_first = req_q->first;
- req->queue_req.sbal_last = req_q->first;
- req->queue_req.sbale_curr = 1;
+ req->qdio_req.sbal_number = 1;
+ req->qdio_req.sbal_first = req_q->first;
+ req->qdio_req.sbal_last = req_q->first;
+ req->qdio_req.sbale_curr = 1;
- sbale = zfcp_qdio_sbale_req(qdio, &req->queue_req);
+ sbale = zfcp_qdio_sbale_req(qdio, &req->qdio_req);
sbale[0].addr = (void *) req->req_id;
sbale[0].flags |= SBAL_FLAGS0_COMMAND;
@@ -745,6 +744,7 @@
return ERR_PTR(-ENOMEM);
}
+ req->seq_no = adapter->fsf_req_seq_no;
req->qtcb->prefix.req_seq_no = adapter->fsf_req_seq_no;
req->qtcb->prefix.req_id = req->req_id;
req->qtcb->prefix.ulp_info = 26;
@@ -752,8 +752,6 @@
req->qtcb->prefix.qtcb_version = FSF_QTCB_CURRENT_VERSION;
req->qtcb->header.req_handle = req->req_id;
req->qtcb->header.fsf_command = req->fsf_command;
- req->seq_no = adapter->fsf_req_seq_no;
- req->qtcb->prefix.req_seq_no = adapter->fsf_req_seq_no;
sbale[1].addr = (void *) req->qtcb;
sbale[1].length = sizeof(struct fsf_qtcb);
}
@@ -770,25 +768,17 @@
{
struct zfcp_adapter *adapter = req->adapter;
struct zfcp_qdio *qdio = adapter->qdio;
- unsigned long flags;
- int idx;
- int with_qtcb = (req->qtcb != NULL);
+ int with_qtcb = (req->qtcb != NULL);
+ int req_id = req->req_id;
- /* put allocated FSF request into hash table */
- spin_lock_irqsave(&adapter->req_list_lock, flags);
- idx = zfcp_reqlist_hash(req->req_id);
- list_add_tail(&req->list, &adapter->req_list[idx]);
- spin_unlock_irqrestore(&adapter->req_list_lock, flags);
+ zfcp_reqlist_add(adapter->req_list, req);
- req->queue_req.qdio_outb_usage = atomic_read(&qdio->req_q.count);
+ req->qdio_req.qdio_outb_usage = atomic_read(&qdio->req_q.count);
req->issued = get_clock();
- if (zfcp_qdio_send(qdio, &req->queue_req)) {
+ if (zfcp_qdio_send(qdio, &req->qdio_req)) {
del_timer(&req->timer);
- spin_lock_irqsave(&adapter->req_list_lock, flags);
/* lookup request again, list might have changed */
- if (zfcp_reqlist_find_safe(adapter, req))
- zfcp_reqlist_remove(adapter, req);
- spin_unlock_irqrestore(&adapter->req_list_lock, flags);
+ zfcp_reqlist_find_rm(adapter->req_list, req_id);
zfcp_erp_adapter_reopen(adapter, 0, "fsrs__1", req);
return -EIO;
}
@@ -826,9 +816,9 @@
goto out;
}
- sbale = zfcp_qdio_sbale_req(qdio, &req->queue_req);
+ sbale = zfcp_qdio_sbale_req(qdio, &req->qdio_req);
sbale[2].flags |= SBAL_FLAGS_LAST_ENTRY;
- req->queue_req.sbale_curr = 2;
+ req->qdio_req.sbale_curr = 2;
sr_buf = mempool_alloc(adapter->pool.status_read_data, GFP_ATOMIC);
if (!sr_buf) {
@@ -837,7 +827,7 @@
}
memset(sr_buf, 0, sizeof(*sr_buf));
req->data = sr_buf;
- sbale = zfcp_qdio_sbale_curr(qdio, &req->queue_req);
+ sbale = zfcp_qdio_sbale_curr(qdio, &req->qdio_req);
sbale->addr = (void *) sr_buf;
sbale->length = sizeof(*sr_buf);
@@ -934,7 +924,7 @@
ZFCP_STATUS_COMMON_UNBLOCKED)))
goto out_error_free;
- sbale = zfcp_qdio_sbale_req(qdio, &req->queue_req);
+ sbale = zfcp_qdio_sbale_req(qdio, &req->qdio_req);
sbale[0].flags |= SBAL_FLAGS0_TYPE_READ;
sbale[1].flags |= SBAL_FLAGS_LAST_ENTRY;
@@ -1029,7 +1019,7 @@
{
struct zfcp_adapter *adapter = req->adapter;
struct qdio_buffer_element *sbale = zfcp_qdio_sbale_req(adapter->qdio,
- &req->queue_req);
+ &req->qdio_req);
u32 feat = adapter->adapter_features;
int bytes;
@@ -1047,15 +1037,15 @@
return 0;
}
- bytes = zfcp_qdio_sbals_from_sg(adapter->qdio, &req->queue_req,
+ bytes = zfcp_qdio_sbals_from_sg(adapter->qdio, &req->qdio_req,
SBAL_FLAGS0_TYPE_WRITE_READ,
sg_req, max_sbals);
if (bytes <= 0)
return -EIO;
req->qtcb->bottom.support.req_buf_length = bytes;
- req->queue_req.sbale_curr = ZFCP_LAST_SBALE_PER_SBAL;
+ req->qdio_req.sbale_curr = ZFCP_LAST_SBALE_PER_SBAL;
- bytes = zfcp_qdio_sbals_from_sg(adapter->qdio, &req->queue_req,
+ bytes = zfcp_qdio_sbals_from_sg(adapter->qdio, &req->qdio_req,
SBAL_FLAGS0_TYPE_WRITE_READ,
sg_resp, max_sbals);
req->qtcb->bottom.support.resp_buf_length = bytes;
@@ -1251,7 +1241,7 @@
}
req->status |= ZFCP_STATUS_FSFREQ_CLEANUP;
- sbale = zfcp_qdio_sbale_req(qdio, &req->queue_req);
+ sbale = zfcp_qdio_sbale_req(qdio, &req->qdio_req);
sbale[0].flags |= SBAL_FLAGS0_TYPE_READ;
sbale[1].flags |= SBAL_FLAGS_LAST_ENTRY;
@@ -1262,13 +1252,13 @@
FSF_FEATURE_UPDATE_ALERT;
req->erp_action = erp_action;
req->handler = zfcp_fsf_exchange_config_data_handler;
- erp_action->fsf_req = req;
+ erp_action->fsf_req_id = req->req_id;
zfcp_fsf_start_erp_timer(req);
retval = zfcp_fsf_req_send(req);
if (retval) {
zfcp_fsf_req_free(req);
- erp_action->fsf_req = NULL;
+ erp_action->fsf_req_id = 0;
}
out:
spin_unlock_bh(&qdio->req_q_lock);
@@ -1293,7 +1283,7 @@
goto out_unlock;
}
- sbale = zfcp_qdio_sbale_req(qdio, &req->queue_req);
+ sbale = zfcp_qdio_sbale_req(qdio, &req->qdio_req);
sbale[0].flags |= SBAL_FLAGS0_TYPE_READ;
sbale[1].flags |= SBAL_FLAGS_LAST_ENTRY;
req->handler = zfcp_fsf_exchange_config_data_handler;
@@ -1349,19 +1339,19 @@
}
req->status |= ZFCP_STATUS_FSFREQ_CLEANUP;
- sbale = zfcp_qdio_sbale_req(qdio, &req->queue_req);
+ sbale = zfcp_qdio_sbale_req(qdio, &req->qdio_req);
sbale[0].flags |= SBAL_FLAGS0_TYPE_READ;
sbale[1].flags |= SBAL_FLAGS_LAST_ENTRY;
req->handler = zfcp_fsf_exchange_port_data_handler;
req->erp_action = erp_action;
- erp_action->fsf_req = req;
+ erp_action->fsf_req_id = req->req_id;
zfcp_fsf_start_erp_timer(req);
retval = zfcp_fsf_req_send(req);
if (retval) {
zfcp_fsf_req_free(req);
- erp_action->fsf_req = NULL;
+ erp_action->fsf_req_id = 0;
}
out:
spin_unlock_bh(&qdio->req_q_lock);
@@ -1398,7 +1388,7 @@
if (data)
req->data = data;
- sbale = zfcp_qdio_sbale_req(qdio, &req->queue_req);
+ sbale = zfcp_qdio_sbale_req(qdio, &req->qdio_req);
sbale[0].flags |= SBAL_FLAGS0_TYPE_READ;
sbale[1].flags |= SBAL_FLAGS_LAST_ENTRY;
@@ -1484,7 +1474,7 @@
}
out:
- put_device(&port->sysfs_device);
+ put_device(&port->dev);
}
/**
@@ -1513,7 +1503,7 @@
}
req->status |= ZFCP_STATUS_FSFREQ_CLEANUP;
- sbale = zfcp_qdio_sbale_req(qdio, &req->queue_req);
+ sbale = zfcp_qdio_sbale_req(qdio, &req->qdio_req);
sbale[0].flags |= SBAL_FLAGS0_TYPE_READ;
sbale[1].flags |= SBAL_FLAGS_LAST_ENTRY;
@@ -1521,15 +1511,15 @@
hton24(req->qtcb->bottom.support.d_id, port->d_id);
req->data = port;
req->erp_action = erp_action;
- erp_action->fsf_req = req;
- get_device(&port->sysfs_device);
+ erp_action->fsf_req_id = req->req_id;
+ get_device(&port->dev);
zfcp_fsf_start_erp_timer(req);
retval = zfcp_fsf_req_send(req);
if (retval) {
zfcp_fsf_req_free(req);
- erp_action->fsf_req = NULL;
- put_device(&port->sysfs_device);
+ erp_action->fsf_req_id = 0;
+ put_device(&port->dev);
}
out:
spin_unlock_bh(&qdio->req_q_lock);
@@ -1583,7 +1573,7 @@
}
req->status |= ZFCP_STATUS_FSFREQ_CLEANUP;
- sbale = zfcp_qdio_sbale_req(qdio, &req->queue_req);
+ sbale = zfcp_qdio_sbale_req(qdio, &req->qdio_req);
sbale[0].flags |= SBAL_FLAGS0_TYPE_READ;
sbale[1].flags |= SBAL_FLAGS_LAST_ENTRY;
@@ -1591,13 +1581,13 @@
req->data = erp_action->port;
req->erp_action = erp_action;
req->qtcb->header.port_handle = erp_action->port->handle;
- erp_action->fsf_req = req;
+ erp_action->fsf_req_id = req->req_id;
zfcp_fsf_start_erp_timer(req);
retval = zfcp_fsf_req_send(req);
if (retval) {
zfcp_fsf_req_free(req);
- erp_action->fsf_req = NULL;
+ erp_action->fsf_req_id = 0;
}
out:
spin_unlock_bh(&qdio->req_q_lock);
@@ -1660,7 +1650,7 @@
}
req->status |= ZFCP_STATUS_FSFREQ_CLEANUP;
- sbale = zfcp_qdio_sbale_req(qdio, &req->queue_req);
+ sbale = zfcp_qdio_sbale_req(qdio, &req->qdio_req);
sbale[0].flags |= SBAL_FLAGS0_TYPE_READ;
sbale[1].flags |= SBAL_FLAGS_LAST_ENTRY;
@@ -1715,7 +1705,7 @@
}
req->status |= ZFCP_STATUS_FSFREQ_CLEANUP;
- sbale = zfcp_qdio_sbale_req(qdio, &req->queue_req);
+ sbale = zfcp_qdio_sbale_req(qdio, &req->qdio_req);
sbale[0].flags |= SBAL_FLAGS0_TYPE_READ;
sbale[1].flags |= SBAL_FLAGS_LAST_ENTRY;
@@ -1809,7 +1799,7 @@
}
req->status |= ZFCP_STATUS_FSFREQ_CLEANUP;
- sbale = zfcp_qdio_sbale_req(qdio, &req->queue_req);
+ sbale = zfcp_qdio_sbale_req(qdio, &req->qdio_req);
sbale[0].flags |= SBAL_FLAGS0_TYPE_READ;
sbale[1].flags |= SBAL_FLAGS_LAST_ENTRY;
@@ -1817,13 +1807,13 @@
req->qtcb->header.port_handle = erp_action->port->handle;
req->erp_action = erp_action;
req->handler = zfcp_fsf_close_physical_port_handler;
- erp_action->fsf_req = req;
+ erp_action->fsf_req_id = req->req_id;
zfcp_fsf_start_erp_timer(req);
retval = zfcp_fsf_req_send(req);
if (retval) {
zfcp_fsf_req_free(req);
- erp_action->fsf_req = NULL;
+ erp_action->fsf_req_id = 0;
}
out:
spin_unlock_bh(&qdio->req_q_lock);
@@ -1982,7 +1972,7 @@
}
req->status |= ZFCP_STATUS_FSFREQ_CLEANUP;
- sbale = zfcp_qdio_sbale_req(qdio, &req->queue_req);
+ sbale = zfcp_qdio_sbale_req(qdio, &req->qdio_req);
sbale[0].flags |= SBAL_FLAGS0_TYPE_READ;
sbale[1].flags |= SBAL_FLAGS_LAST_ENTRY;
@@ -1991,7 +1981,7 @@
req->handler = zfcp_fsf_open_unit_handler;
req->data = erp_action->unit;
req->erp_action = erp_action;
- erp_action->fsf_req = req;
+ erp_action->fsf_req_id = req->req_id;
if (!(adapter->connection_features & FSF_FEATURE_NPIV_MODE))
req->qtcb->bottom.support.option = FSF_OPEN_LUN_SUPPRESS_BOXING;
@@ -2000,7 +1990,7 @@
retval = zfcp_fsf_req_send(req);
if (retval) {
zfcp_fsf_req_free(req);
- erp_action->fsf_req = NULL;
+ erp_action->fsf_req_id = 0;
}
out:
spin_unlock_bh(&qdio->req_q_lock);
@@ -2068,7 +2058,7 @@
}
req->status |= ZFCP_STATUS_FSFREQ_CLEANUP;
- sbale = zfcp_qdio_sbale_req(qdio, &req->queue_req);
+ sbale = zfcp_qdio_sbale_req(qdio, &req->qdio_req);
sbale[0].flags |= SBAL_FLAGS0_TYPE_READ;
sbale[1].flags |= SBAL_FLAGS_LAST_ENTRY;
@@ -2077,13 +2067,13 @@
req->handler = zfcp_fsf_close_unit_handler;
req->data = erp_action->unit;
req->erp_action = erp_action;
- erp_action->fsf_req = req;
+ erp_action->fsf_req_id = req->req_id;
zfcp_fsf_start_erp_timer(req);
retval = zfcp_fsf_req_send(req);
if (retval) {
zfcp_fsf_req_free(req);
- erp_action->fsf_req = NULL;
+ erp_action->fsf_req_id = 0;
}
out:
spin_unlock_bh(&qdio->req_q_lock);
@@ -2111,8 +2101,8 @@
blktrc.magic = ZFCP_BLK_DRV_DATA_MAGIC;
if (req->status & ZFCP_STATUS_FSFREQ_ERROR)
blktrc.flags |= ZFCP_BLK_REQ_ERROR;
- blktrc.inb_usage = req->queue_req.qdio_inb_usage;
- blktrc.outb_usage = req->queue_req.qdio_outb_usage;
+ blktrc.inb_usage = req->qdio_req.qdio_inb_usage;
+ blktrc.outb_usage = req->qdio_req.qdio_outb_usage;
if (req->adapter->adapter_features & FSF_FEATURE_MEASUREMENT_DATA) {
blktrc.flags |= ZFCP_BLK_LAT_VALID;
@@ -2169,12 +2159,7 @@
zfcp_fsf_req_trace(req, scpnt);
skip_fsfstatus:
- if (scpnt->result != 0)
- zfcp_dbf_scsi_result("erro", 3, req->adapter->dbf, scpnt, req);
- else if (scpnt->retries > 0)
- zfcp_dbf_scsi_result("retr", 4, req->adapter->dbf, scpnt, req);
- else
- zfcp_dbf_scsi_result("norm", 6, req->adapter->dbf, scpnt, req);
+ zfcp_dbf_scsi_result(req->adapter->dbf, scpnt, req);
scpnt->host_scribble = NULL;
(scpnt->scsi_done) (scpnt);
@@ -2274,7 +2259,7 @@
else {
zfcp_fsf_send_fcp_command_task_handler(req);
req->unit = NULL;
- put_device(&unit->sysfs_device);
+ put_device(&unit->dev);
}
}
@@ -2312,7 +2297,7 @@
}
req->status |= ZFCP_STATUS_FSFREQ_CLEANUP;
- get_device(&unit->sysfs_device);
+ get_device(&unit->dev);
req->unit = unit;
req->data = scsi_cmnd;
req->handler = zfcp_fsf_send_fcp_command_handler;
@@ -2346,11 +2331,11 @@
fcp_cmnd = (struct fcp_cmnd *) &req->qtcb->bottom.io.fcp_cmnd;
zfcp_fc_scsi_to_fcp(fcp_cmnd, scsi_cmnd);
- real_bytes = zfcp_qdio_sbals_from_sg(qdio, &req->queue_req, sbtype,
+ real_bytes = zfcp_qdio_sbals_from_sg(qdio, &req->qdio_req, sbtype,
scsi_sglist(scsi_cmnd),
FSF_MAX_SBALS_PER_REQ);
if (unlikely(real_bytes < 0)) {
- if (req->queue_req.sbal_number >= FSF_MAX_SBALS_PER_REQ) {
+ if (req->qdio_req.sbal_number >= FSF_MAX_SBALS_PER_REQ) {
dev_err(&adapter->ccw_device->dev,
"Oversize data package, unit 0x%016Lx "
"on port 0x%016Lx closed\n",
@@ -2369,7 +2354,7 @@
goto out;
failed_scsi_cmnd:
- put_device(&unit->sysfs_device);
+ put_device(&unit->dev);
zfcp_fsf_req_free(req);
scsi_cmnd->host_scribble = NULL;
out:
@@ -2415,7 +2400,7 @@
req->qtcb->bottom.io.service_class = FSF_CLASS_3;
req->qtcb->bottom.io.fcp_cmnd_length = FCP_CMND_LEN;
- sbale = zfcp_qdio_sbale_req(qdio, &req->queue_req);
+ sbale = zfcp_qdio_sbale_req(qdio, &req->qdio_req);
sbale[0].flags |= SBAL_FLAGS0_TYPE_WRITE;
sbale[1].flags |= SBAL_FLAGS_LAST_ENTRY;
@@ -2478,14 +2463,14 @@
req->handler = zfcp_fsf_control_file_handler;
- sbale = zfcp_qdio_sbale_req(qdio, &req->queue_req);
+ sbale = zfcp_qdio_sbale_req(qdio, &req->qdio_req);
sbale[0].flags |= direction;
bottom = &req->qtcb->bottom.support;
bottom->operation_subtype = FSF_CFDC_OPERATION_SUBTYPE;
bottom->option = fsf_cfdc->option;
- bytes = zfcp_qdio_sbals_from_sg(qdio, &req->queue_req,
+ bytes = zfcp_qdio_sbals_from_sg(qdio, &req->qdio_req,
direction, fsf_cfdc->sg,
FSF_MAX_SBALS_PER_REQ);
if (bytes != ZFCP_CFDC_MAX_SIZE) {
@@ -2516,15 +2501,14 @@
struct qdio_buffer *sbal = qdio->resp_q.sbal[sbal_idx];
struct qdio_buffer_element *sbale;
struct zfcp_fsf_req *fsf_req;
- unsigned long flags, req_id;
+ unsigned long req_id;
int idx;
for (idx = 0; idx < QDIO_MAX_ELEMENTS_PER_BUFFER; idx++) {
sbale = &sbal->element[idx];
req_id = (unsigned long) sbale->addr;
- spin_lock_irqsave(&adapter->req_list_lock, flags);
- fsf_req = zfcp_reqlist_find(adapter, req_id);
+ fsf_req = zfcp_reqlist_find_rm(adapter->req_list, req_id);
if (!fsf_req)
/*
@@ -2534,11 +2518,8 @@
panic("error: unknown req_id (%lx) on adapter %s.\n",
req_id, dev_name(&adapter->ccw_device->dev));
- list_del(&fsf_req->list);
- spin_unlock_irqrestore(&adapter->req_list_lock, flags);
-
- fsf_req->queue_req.sbal_response = sbal_idx;
- fsf_req->queue_req.qdio_inb_usage =
+ fsf_req->qdio_req.sbal_response = sbal_idx;
+ fsf_req->qdio_req.qdio_inb_usage =
atomic_read(&qdio->resp_q.count);
zfcp_fsf_req_complete(fsf_req);
diff --git a/drivers/s390/scsi/zfcp_qdio.c b/drivers/s390/scsi/zfcp_qdio.c
index 6c5228b..71b97ff7 100644
--- a/drivers/s390/scsi/zfcp_qdio.c
+++ b/drivers/s390/scsi/zfcp_qdio.c
@@ -10,6 +10,7 @@
#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
#include "zfcp_ext.h"
+#include "zfcp_qdio.h"
#define QBUFF_PER_PAGE (PAGE_SIZE / sizeof(struct qdio_buffer))
@@ -28,12 +29,6 @@
return 0;
}
-static struct qdio_buffer_element *
-zfcp_qdio_sbale(struct zfcp_qdio_queue *q, int sbal_idx, int sbale_idx)
-{
- return &q->sbal[sbal_idx]->element[sbale_idx];
-}
-
static void zfcp_qdio_handler_error(struct zfcp_qdio *qdio, char *id)
{
struct zfcp_adapter *adapter = qdio->adapter;
@@ -106,7 +101,7 @@
if (unlikely(retval)) {
atomic_set(&queue->count, count);
- /* FIXME: Recover this with an adapter reopen? */
+ zfcp_erp_adapter_reopen(qdio->adapter, 0, "qdrpb_1", NULL);
} else {
queue->first += count;
queue->first %= QDIO_MAX_BUFFERS_PER_Q;
@@ -145,32 +140,8 @@
zfcp_qdio_resp_put_back(qdio, count);
}
-/**
- * zfcp_qdio_sbale_req - return ptr to SBALE of req_q for a struct zfcp_fsf_req
- * @qdio: pointer to struct zfcp_qdio
- * @q_rec: pointer to struct zfcp_queue_rec
- * Returns: pointer to qdio_buffer_element (SBALE) structure
- */
-struct qdio_buffer_element *zfcp_qdio_sbale_req(struct zfcp_qdio *qdio,
- struct zfcp_queue_req *q_req)
-{
- return zfcp_qdio_sbale(&qdio->req_q, q_req->sbal_last, 0);
-}
-
-/**
- * zfcp_qdio_sbale_curr - return curr SBALE on req_q for a struct zfcp_fsf_req
- * @fsf_req: pointer to struct fsf_req
- * Returns: pointer to qdio_buffer_element (SBALE) structure
- */
-struct qdio_buffer_element *zfcp_qdio_sbale_curr(struct zfcp_qdio *qdio,
- struct zfcp_queue_req *q_req)
-{
- return zfcp_qdio_sbale(&qdio->req_q, q_req->sbal_last,
- q_req->sbale_curr);
-}
-
static void zfcp_qdio_sbal_limit(struct zfcp_qdio *qdio,
- struct zfcp_queue_req *q_req, int max_sbals)
+ struct zfcp_qdio_req *q_req, int max_sbals)
{
int count = atomic_read(&qdio->req_q.count);
count = min(count, max_sbals);
@@ -179,7 +150,7 @@
}
static struct qdio_buffer_element *
-zfcp_qdio_sbal_chain(struct zfcp_qdio *qdio, struct zfcp_queue_req *q_req,
+zfcp_qdio_sbal_chain(struct zfcp_qdio *qdio, struct zfcp_qdio_req *q_req,
unsigned long sbtype)
{
struct qdio_buffer_element *sbale;
@@ -214,7 +185,7 @@
}
static struct qdio_buffer_element *
-zfcp_qdio_sbale_next(struct zfcp_qdio *qdio, struct zfcp_queue_req *q_req,
+zfcp_qdio_sbale_next(struct zfcp_qdio *qdio, struct zfcp_qdio_req *q_req,
unsigned int sbtype)
{
if (q_req->sbale_curr == ZFCP_LAST_SBALE_PER_SBAL)
@@ -224,7 +195,7 @@
}
static void zfcp_qdio_undo_sbals(struct zfcp_qdio *qdio,
- struct zfcp_queue_req *q_req)
+ struct zfcp_qdio_req *q_req)
{
struct qdio_buffer **sbal = qdio->req_q.sbal;
int first = q_req->sbal_first;
@@ -235,7 +206,7 @@
}
static int zfcp_qdio_fill_sbals(struct zfcp_qdio *qdio,
- struct zfcp_queue_req *q_req,
+ struct zfcp_qdio_req *q_req,
unsigned int sbtype, void *start_addr,
unsigned int total_length)
{
@@ -271,8 +242,7 @@
* @max_sbals: upper bound for number of SBALs to be used
* Returns: number of bytes, or error (negativ)
*/
-int zfcp_qdio_sbals_from_sg(struct zfcp_qdio *qdio,
- struct zfcp_queue_req *q_req,
+int zfcp_qdio_sbals_from_sg(struct zfcp_qdio *qdio, struct zfcp_qdio_req *q_req,
unsigned long sbtype, struct scatterlist *sg,
int max_sbals)
{
@@ -304,10 +274,10 @@
/**
* zfcp_qdio_send - set PCI flag in first SBALE and send req to QDIO
* @qdio: pointer to struct zfcp_qdio
- * @q_req: pointer to struct zfcp_queue_req
+ * @q_req: pointer to struct zfcp_qdio_req
* Returns: 0 on success, error otherwise
*/
-int zfcp_qdio_send(struct zfcp_qdio *qdio, struct zfcp_queue_req *q_req)
+int zfcp_qdio_send(struct zfcp_qdio *qdio, struct zfcp_qdio_req *q_req)
{
struct zfcp_qdio_queue *req_q = &qdio->req_q;
int first = q_req->sbal_first;
diff --git a/drivers/s390/scsi/zfcp_qdio.h b/drivers/s390/scsi/zfcp_qdio.h
new file mode 100644
index 0000000..8cca546
--- /dev/null
+++ b/drivers/s390/scsi/zfcp_qdio.h
@@ -0,0 +1,109 @@
+/*
+ * zfcp device driver
+ *
+ * Header file for zfcp qdio interface
+ *
+ * Copyright IBM Corporation 2010
+ */
+
+#ifndef ZFCP_QDIO_H
+#define ZFCP_QDIO_H
+
+#include <asm/qdio.h>
+
+/**
+ * struct zfcp_qdio_queue - qdio queue buffer, zfcp index and free count
+ * @sbal: qdio buffers
+ * @first: index of next free buffer in queue
+ * @count: number of free buffers in queue
+ */
+struct zfcp_qdio_queue {
+ struct qdio_buffer *sbal[QDIO_MAX_BUFFERS_PER_Q];
+ u8 first;
+ atomic_t count;
+};
+
+/**
+ * struct zfcp_qdio - basic qdio data structure
+ * @resp_q: response queue
+ * @req_q: request queue
+ * @stat_lock: lock to protect req_q_util and req_q_time
+ * @req_q_lock: lock to serialize access to request queue
+ * @req_q_time: time of last fill level change
+ * @req_q_util: used for accounting
+ * @req_q_full: queue full incidents
+ * @req_q_wq: used to wait for SBAL availability
+ * @adapter: adapter used in conjunction with this qdio structure
+ */
+struct zfcp_qdio {
+ struct zfcp_qdio_queue resp_q;
+ struct zfcp_qdio_queue req_q;
+ spinlock_t stat_lock;
+ spinlock_t req_q_lock;
+ unsigned long long req_q_time;
+ u64 req_q_util;
+ atomic_t req_q_full;
+ wait_queue_head_t req_q_wq;
+ struct zfcp_adapter *adapter;
+};
+
+/**
+ * struct zfcp_qdio_req - qdio queue related values for a request
+ * @sbal_number: number of free sbals
+ * @sbal_first: first sbal for this request
+ * @sbal_last: last sbal for this request
+ * @sbal_limit: last possible sbal for this request
+ * @sbale_curr: current sbale at creation of this request
+ * @sbal_response: sbal used in interrupt
+ * @qdio_outb_usage: usage of outbound queue
+ * @qdio_inb_usage: usage of inbound queue
+ */
+struct zfcp_qdio_req {
+ u8 sbal_number;
+ u8 sbal_first;
+ u8 sbal_last;
+ u8 sbal_limit;
+ u8 sbale_curr;
+ u8 sbal_response;
+ u16 qdio_outb_usage;
+ u16 qdio_inb_usage;
+};
+
+/**
+ * zfcp_qdio_sbale - return pointer to sbale in qdio queue
+ * @q: queue where to find sbal
+ * @sbal_idx: sbal index in queue
+ * @sbale_idx: sbale index in sbal
+ */
+static inline struct qdio_buffer_element *
+zfcp_qdio_sbale(struct zfcp_qdio_queue *q, int sbal_idx, int sbale_idx)
+{
+ return &q->sbal[sbal_idx]->element[sbale_idx];
+}
+
+/**
+ * zfcp_qdio_sbale_req - return pointer to sbale on req_q for a request
+ * @qdio: pointer to struct zfcp_qdio
+ * @q_rec: pointer to struct zfcp_qdio_req
+ * Returns: pointer to qdio_buffer_element (sbale) structure
+ */
+static inline struct qdio_buffer_element *
+zfcp_qdio_sbale_req(struct zfcp_qdio *qdio, struct zfcp_qdio_req *q_req)
+{
+ return zfcp_qdio_sbale(&qdio->req_q, q_req->sbal_last, 0);
+}
+
+/**
+ * zfcp_qdio_sbale_curr - return current sbale on req_q for a request
+ * @qdio: pointer to struct zfcp_qdio
+ * @fsf_req: pointer to struct zfcp_fsf_req
+ * Returns: pointer to qdio_buffer_element (sbale) structure
+ */
+static inline struct qdio_buffer_element *
+zfcp_qdio_sbale_curr(struct zfcp_qdio *qdio, struct zfcp_qdio_req *q_req)
+{
+ return zfcp_qdio_sbale(&qdio->req_q, q_req->sbal_last,
+ q_req->sbale_curr);
+}
+
+#endif /* ZFCP_QDIO_H */
diff --git a/drivers/s390/scsi/zfcp_reqlist.h b/drivers/s390/scsi/zfcp_reqlist.h
new file mode 100644
index 0000000..a72d1b7
--- /dev/null
+++ b/drivers/s390/scsi/zfcp_reqlist.h
@@ -0,0 +1,183 @@
+/*
+ * zfcp device driver
+ *
+ * Data structure and helper functions for tracking pending FSF
+ * requests.
+ *
+ * Copyright IBM Corporation 2009
+ */
+
+#ifndef ZFCP_REQLIST_H
+#define ZFCP_REQLIST_H
+
+/* number of hash buckets */
+#define ZFCP_REQ_LIST_BUCKETS 128
+
+/**
+ * struct zfcp_reqlist - Container for request list (reqlist)
+ * @lock: Spinlock for protecting the hash list
+ * @list: Array of hashbuckets, each is a list of requests in this bucket
+ */
+struct zfcp_reqlist {
+ spinlock_t lock;
+ struct list_head buckets[ZFCP_REQ_LIST_BUCKETS];
+};
+
+static inline int zfcp_reqlist_hash(unsigned long req_id)
+{
+ return req_id % ZFCP_REQ_LIST_BUCKETS;
+}
+
+/**
+ * zfcp_reqlist_alloc - Allocate and initialize reqlist
+ *
+ * Returns pointer to allocated reqlist on success, or NULL on
+ * allocation failure.
+ */
+static inline struct zfcp_reqlist *zfcp_reqlist_alloc(void)
+{
+ unsigned int i;
+ struct zfcp_reqlist *rl;
+
+ rl = kzalloc(sizeof(struct zfcp_reqlist), GFP_KERNEL);
+ if (!rl)
+ return NULL;
+
+ spin_lock_init(&rl->lock);
+
+ for (i = 0; i < ZFCP_REQ_LIST_BUCKETS; i++)
+ INIT_LIST_HEAD(&rl->buckets[i]);
+
+ return rl;
+}
+
+/**
+ * zfcp_reqlist_isempty - Check whether the request list empty
+ * @rl: pointer to reqlist
+ *
+ * Returns: 1 if list is empty, 0 if not
+ */
+static inline int zfcp_reqlist_isempty(struct zfcp_reqlist *rl)
+{
+ unsigned int i;
+
+ for (i = 0; i < ZFCP_REQ_LIST_BUCKETS; i++)
+ if (!list_empty(&rl->buckets[i]))
+ return 0;
+ return 1;
+}
+
+/**
+ * zfcp_reqlist_free - Free allocated memory for reqlist
+ * @rl: The reqlist where to free memory
+ */
+static inline void zfcp_reqlist_free(struct zfcp_reqlist *rl)
+{
+ /* sanity check */
+ BUG_ON(!zfcp_reqlist_isempty(rl));
+
+ kfree(rl);
+}
+
+static inline struct zfcp_fsf_req *
+_zfcp_reqlist_find(struct zfcp_reqlist *rl, unsigned long req_id)
+{
+ struct zfcp_fsf_req *req;
+ unsigned int i;
+
+ i = zfcp_reqlist_hash(req_id);
+ list_for_each_entry(req, &rl->buckets[i], list)
+ if (req->req_id == req_id)
+ return req;
+ return NULL;
+}
+
+/**
+ * zfcp_reqlist_find - Lookup FSF request by its request id
+ * @rl: The reqlist where to lookup the FSF request
+ * @req_id: The request id to look for
+ *
+ * Returns a pointer to the FSF request with the specified request id
+ * or NULL if there is no known FSF request with this id.
+ */
+static inline struct zfcp_fsf_req *
+zfcp_reqlist_find(struct zfcp_reqlist *rl, unsigned long req_id)
+{
+ unsigned long flags;
+ struct zfcp_fsf_req *req;
+
+ spin_lock_irqsave(&rl->lock, flags);
+ req = _zfcp_reqlist_find(rl, req_id);
+ spin_unlock_irqrestore(&rl->lock, flags);
+
+ return req;
+}
+
+/**
+ * zfcp_reqlist_find_rm - Lookup request by id and remove it from reqlist
+ * @rl: reqlist where to search and remove entry
+ * @req_id: The request id of the request to look for
+ *
+ * This functions tries to find the FSF request with the specified
+ * id and then removes it from the reqlist. The reqlist lock is held
+ * during both steps of the operation.
+ *
+ * Returns: Pointer to the FSF request if the request has been found,
+ * NULL if it has not been found.
+ */
+static inline struct zfcp_fsf_req *
+zfcp_reqlist_find_rm(struct zfcp_reqlist *rl, unsigned long req_id)
+{
+ unsigned long flags;
+ struct zfcp_fsf_req *req;
+
+ spin_lock_irqsave(&rl->lock, flags);
+ req = _zfcp_reqlist_find(rl, req_id);
+ if (req)
+ list_del(&req->list);
+ spin_unlock_irqrestore(&rl->lock, flags);
+
+ return req;
+}
+
+/**
+ * zfcp_reqlist_add - Add entry to reqlist
+ * @rl: reqlist where to add the entry
+ * @req: The entry to add
+ *
+ * The request id always increases. As an optimization new requests
+ * are added here with list_add_tail at the end of the bucket lists
+ * while old requests are looked up starting at the beginning of the
+ * lists.
+ */
+static inline void zfcp_reqlist_add(struct zfcp_reqlist *rl,
+ struct zfcp_fsf_req *req)
+{
+ unsigned int i;
+ unsigned long flags;
+
+ i = zfcp_reqlist_hash(req->req_id);
+
+ spin_lock_irqsave(&rl->lock, flags);
+ list_add_tail(&req->list, &rl->buckets[i]);
+ spin_unlock_irqrestore(&rl->lock, flags);
+}
+
+/**
+ * zfcp_reqlist_move - Move all entries from reqlist to simple list
+ * @rl: The zfcp_reqlist where to remove all entries
+ * @list: The list where to move all entries
+ */
+static inline void zfcp_reqlist_move(struct zfcp_reqlist *rl,
+ struct list_head *list)
+{
+ unsigned int i;
+ unsigned long flags;
+
+ spin_lock_irqsave(&rl->lock, flags);
+ for (i = 0; i < ZFCP_REQ_LIST_BUCKETS; i++)
+ list_splice_init(&rl->buckets[i], list);
+ spin_unlock_irqrestore(&rl->lock, flags);
+}
+
+#endif /* ZFCP_REQLIST_H */
diff --git a/drivers/s390/scsi/zfcp_scsi.c b/drivers/s390/scsi/zfcp_scsi.c
index 8e6fc68..c3c4178 100644
--- a/drivers/s390/scsi/zfcp_scsi.c
+++ b/drivers/s390/scsi/zfcp_scsi.c
@@ -3,7 +3,7 @@
*
* Interface to Linux SCSI midlayer.
*
- * Copyright IBM Corporation 2002, 2009
+ * Copyright IBM Corporation 2002, 2010
*/
#define KMSG_COMPONENT "zfcp"
@@ -15,6 +15,7 @@
#include "zfcp_ext.h"
#include "zfcp_dbf.h"
#include "zfcp_fc.h"
+#include "zfcp_reqlist.h"
static unsigned int default_depth = 32;
module_param_named(queue_depth, default_depth, uint, 0600);
@@ -43,7 +44,7 @@
{
struct zfcp_unit *unit = (struct zfcp_unit *) sdpnt->hostdata;
unit->device = NULL;
- put_device(&unit->sysfs_device);
+ put_device(&unit->dev);
}
static int zfcp_scsi_slave_configure(struct scsi_device *sdp)
@@ -59,10 +60,9 @@
{
struct zfcp_adapter *adapter =
(struct zfcp_adapter *) scpnt->device->host->hostdata[0];
+
set_host_byte(scpnt, result);
- if ((scpnt->device != NULL) && (scpnt->device->host != NULL))
- zfcp_dbf_scsi_result("fail", 4, adapter->dbf, scpnt, NULL);
- /* return directly */
+ zfcp_dbf_scsi_fail_send(adapter->dbf, scpnt);
scpnt->scsi_done(scpnt);
}
@@ -86,18 +86,10 @@
adapter = (struct zfcp_adapter *) scpnt->device->host->hostdata[0];
unit = scpnt->device->hostdata;
- BUG_ON(!adapter || (adapter != unit->port->adapter));
- BUG_ON(!scpnt->scsi_done);
-
- if (unlikely(!unit)) {
- zfcp_scsi_command_fail(scpnt, DID_NO_CONNECT);
- return 0;
- }
-
scsi_result = fc_remote_port_chkready(rport);
if (unlikely(scsi_result)) {
scpnt->result = scsi_result;
- zfcp_dbf_scsi_result("fail", 4, adapter->dbf, scpnt, NULL);
+ zfcp_dbf_scsi_fail_send(adapter->dbf, scpnt);
scpnt->scsi_done(scpnt);
return 0;
}
@@ -189,9 +181,7 @@
/* avoid race condition between late normal completion and abort */
write_lock_irqsave(&adapter->abort_lock, flags);
- spin_lock(&adapter->req_list_lock);
- old_req = zfcp_reqlist_find(adapter, old_reqid);
- spin_unlock(&adapter->req_list_lock);
+ old_req = zfcp_reqlist_find(adapter->req_list, old_reqid);
if (!old_req) {
write_unlock_irqrestore(&adapter->abort_lock, flags);
zfcp_dbf_scsi_abort("lte1", adapter->dbf, scpnt, NULL,
@@ -521,7 +511,7 @@
if (port) {
zfcp_erp_port_reopen(port, 0, "sctrpi1", NULL);
- put_device(&port->sysfs_device);
+ put_device(&port->dev);
}
}
@@ -563,23 +553,23 @@
void zfcp_scsi_schedule_rport_register(struct zfcp_port *port)
{
- get_device(&port->sysfs_device);
+ get_device(&port->dev);
port->rport_task = RPORT_ADD;
if (!queue_work(port->adapter->work_queue, &port->rport_work))
- put_device(&port->sysfs_device);
+ put_device(&port->dev);
}
void zfcp_scsi_schedule_rport_block(struct zfcp_port *port)
{
- get_device(&port->sysfs_device);
+ get_device(&port->dev);
port->rport_task = RPORT_DEL;
if (port->rport && queue_work(port->adapter->work_queue,
&port->rport_work))
return;
- put_device(&port->sysfs_device);
+ put_device(&port->dev);
}
void zfcp_scsi_schedule_rports_block(struct zfcp_adapter *adapter)
@@ -608,7 +598,7 @@
}
}
- put_device(&port->sysfs_device);
+ put_device(&port->dev);
}
@@ -626,7 +616,7 @@
scsilun_to_int((struct scsi_lun *)
&unit->fcp_lun), 0);
- put_device(&unit->sysfs_device);
+ put_device(&unit->dev);
}
struct fc_function_template zfcp_transport_functions = {
diff --git a/drivers/s390/scsi/zfcp_sysfs.c b/drivers/s390/scsi/zfcp_sysfs.c
index f539e00..a43035d 100644
--- a/drivers/s390/scsi/zfcp_sysfs.c
+++ b/drivers/s390/scsi/zfcp_sysfs.c
@@ -3,7 +3,7 @@
*
* sysfs attributes.
*
- * Copyright IBM Corporation 2008, 2009
+ * Copyright IBM Corporation 2008, 2010
*/
#define KMSG_COMPONENT "zfcp"
@@ -19,8 +19,7 @@
struct device_attribute *at,\
char *buf) \
{ \
- struct _feat_def *_feat = container_of(dev, struct _feat_def, \
- sysfs_device); \
+ struct _feat_def *_feat = container_of(dev, struct _feat_def, dev); \
\
return sprintf(buf, _format, _value); \
} \
@@ -87,8 +86,7 @@
struct device_attribute *attr, \
char *buf) \
{ \
- struct _feat_def *_feat = container_of(dev, struct _feat_def, \
- sysfs_device); \
+ struct _feat_def *_feat = container_of(dev, struct _feat_def, dev); \
\
if (atomic_read(&_feat->status) & ZFCP_STATUS_COMMON_ERP_FAILED) \
return sprintf(buf, "1\n"); \
@@ -99,12 +97,11 @@
struct device_attribute *attr,\
const char *buf, size_t count)\
{ \
- struct _feat_def *_feat = container_of(dev, struct _feat_def, \
- sysfs_device); \
+ struct _feat_def *_feat = container_of(dev, struct _feat_def, dev); \
unsigned long val; \
int retval = 0; \
\
- if (!(_feat && get_device(&_feat->sysfs_device))) \
+ if (!(_feat && get_device(&_feat->dev))) \
return -EBUSY; \
\
if (strict_strtoul(buf, 0, &val) || val != 0) { \
@@ -118,7 +115,7 @@
_reopen_id, NULL); \
zfcp_erp_wait(_adapter); \
out: \
- put_device(&_feat->sysfs_device); \
+ put_device(&_feat->dev); \
return retval ? retval : (ssize_t) count; \
} \
static ZFCP_DEV_ATTR(_feat, failed, S_IWUSR | S_IRUGO, \
@@ -224,10 +221,10 @@
list_del(&port->list);
write_unlock_irq(&adapter->port_list_lock);
- put_device(&port->sysfs_device);
+ put_device(&port->dev);
zfcp_erp_port_shutdown(port, 0, "syprs_1", NULL);
- zfcp_device_unregister(&port->sysfs_device, &zfcp_sysfs_port_attrs);
+ zfcp_device_unregister(&port->dev, &zfcp_sysfs_port_attrs);
out:
zfcp_ccw_adapter_put(adapter);
return retval ? retval : (ssize_t) count;
@@ -258,13 +255,12 @@
struct device_attribute *attr,
const char *buf, size_t count)
{
- struct zfcp_port *port = container_of(dev, struct zfcp_port,
- sysfs_device);
+ struct zfcp_port *port = container_of(dev, struct zfcp_port, dev);
struct zfcp_unit *unit;
u64 fcp_lun;
int retval = -EINVAL;
- if (!(port && get_device(&port->sysfs_device)))
+ if (!(port && get_device(&port->dev)))
return -EBUSY;
if (strict_strtoull(buf, 0, (unsigned long long *) &fcp_lun))
@@ -280,7 +276,7 @@
zfcp_erp_wait(unit->port->adapter);
flush_work(&unit->scsi_work);
out:
- put_device(&port->sysfs_device);
+ put_device(&port->dev);
return retval ? retval : (ssize_t) count;
}
static DEVICE_ATTR(unit_add, S_IWUSR, NULL, zfcp_sysfs_unit_add_store);
@@ -289,13 +285,12 @@
struct device_attribute *attr,
const char *buf, size_t count)
{
- struct zfcp_port *port = container_of(dev, struct zfcp_port,
- sysfs_device);
+ struct zfcp_port *port = container_of(dev, struct zfcp_port, dev);
struct zfcp_unit *unit;
u64 fcp_lun;
int retval = -EINVAL;
- if (!(port && get_device(&port->sysfs_device)))
+ if (!(port && get_device(&port->dev)))
return -EBUSY;
if (strict_strtoull(buf, 0, (unsigned long long *) &fcp_lun))
@@ -314,12 +309,12 @@
list_del(&unit->list);
write_unlock_irq(&port->unit_list_lock);
- put_device(&unit->sysfs_device);
+ put_device(&unit->dev);
zfcp_erp_unit_shutdown(unit, 0, "syurs_1", NULL);
- zfcp_device_unregister(&unit->sysfs_device, &zfcp_sysfs_unit_attrs);
+ zfcp_device_unregister(&unit->dev, &zfcp_sysfs_unit_attrs);
out:
- put_device(&port->sysfs_device);
+ put_device(&port->dev);
return retval ? retval : (ssize_t) count;
}
static DEVICE_ATTR(unit_remove, S_IWUSR, NULL, zfcp_sysfs_unit_remove_store);
diff --git a/drivers/sbus/char/openprom.c b/drivers/sbus/char/openprom.c
index 75ac19b..fc2f676 100644
--- a/drivers/sbus/char/openprom.c
+++ b/drivers/sbus/char/openprom.c
@@ -233,7 +233,7 @@
ph = 0;
if (dp)
- ph = dp->node;
+ ph = dp->phandle;
data->current_node = dp;
*((int *) op->oprom_array) = ph;
@@ -256,7 +256,7 @@
dp = pci_device_to_OF_node(pdev);
data->current_node = dp;
- *((int *)op->oprom_array) = dp->node;
+ *((int *)op->oprom_array) = dp->phandle;
op->oprom_size = sizeof(int);
err = copyout(argp, op, bufsize + sizeof(int));
@@ -273,7 +273,7 @@
dp = of_find_node_by_path(op->oprom_array);
if (dp)
- ph = dp->node;
+ ph = dp->phandle;
data->current_node = dp;
*((int *)op->oprom_array) = ph;
op->oprom_size = sizeof(int);
@@ -540,7 +540,7 @@
}
}
if (dp)
- nd = dp->node;
+ nd = dp->phandle;
if (copy_to_user(argp, &nd, sizeof(phandle)))
return -EFAULT;
@@ -570,7 +570,7 @@
case OPIOCGETOPTNODE:
BUILD_BUG_ON(sizeof(phandle) != sizeof(int));
- if (copy_to_user(argp, &options_node->node, sizeof(phandle)))
+ if (copy_to_user(argp, &options_node->phandle, sizeof(phandle)))
return -EFAULT;
return 0;
diff --git a/drivers/scsi/FlashPoint.c b/drivers/scsi/FlashPoint.c
index b898d38..e40cdfb 100644
--- a/drivers/scsi/FlashPoint.c
+++ b/drivers/scsi/FlashPoint.c
@@ -3924,7 +3924,7 @@
{
struct sccb_mgr_tar_info *currTar_Info;
- if ((p_sccb->TargID > MAX_SCSI_TAR) || (p_sccb->Lun > MAX_LUN)) {
+ if ((p_sccb->TargID >= MAX_SCSI_TAR) || (p_sccb->Lun >= MAX_LUN)) {
return;
}
currTar_Info = &FPT_sccbMgrTbl[p_card][p_sccb->TargID];
diff --git a/drivers/scsi/be2iscsi/be.h b/drivers/scsi/be2iscsi/be.h
index a93a504..136b49c 100644
--- a/drivers/scsi/be2iscsi/be.h
+++ b/drivers/scsi/be2iscsi/be.h
@@ -1,5 +1,5 @@
/**
- * Copyright (C) 2005 - 2009 ServerEngines
+ * Copyright (C) 2005 - 2010 ServerEngines
* All rights reserved.
*
* This program is free software; you can redistribute it and/or
@@ -24,6 +24,10 @@
#define FW_VER_LEN 32
#define MCC_Q_LEN 128
#define MCC_CQ_LEN 256
+#define MAX_MCC_CMD 16
+/* BladeEngine Generation numbers */
+#define BE_GEN2 2
+#define BE_GEN3 3
struct be_dma_mem {
void *va;
@@ -57,6 +61,11 @@
return q->dma_mem.va + q->head * q->entry_size;
}
+static inline void *queue_get_wrb(struct be_queue_info *q, unsigned int wrb_num)
+{
+ return q->dma_mem.va + wrb_num * q->entry_size;
+}
+
static inline void *queue_tail_node(struct be_queue_info *q)
{
return q->dma_mem.va + q->tail * q->entry_size;
@@ -104,15 +113,19 @@
spinlock_t mcc_lock; /* For serializing mcc cmds to BE card */
spinlock_t mcc_cq_lock;
- /* MCC Async callback */
- void (*async_cb) (void *adapter, bool link_up);
- void *adapter_ctxt;
+ wait_queue_head_t mcc_wait[MAX_MCC_CMD + 1];
+ unsigned int mcc_tag[MAX_MCC_CMD];
+ unsigned int mcc_numtag[MAX_MCC_CMD + 1];
+ unsigned short mcc_alloc_index;
+ unsigned short mcc_free_index;
+ unsigned int mcc_tag_available;
};
#include "be_cmds.h"
#define PAGE_SHIFT_4K 12
#define PAGE_SIZE_4K (1 << PAGE_SHIFT_4K)
+#define mcc_timeout 120000 /* 5s timeout */
/* Returns number of pages spanned by the data starting at the given addr */
#define PAGES_4K_SPANNED(_address, size) \
diff --git a/drivers/scsi/be2iscsi/be_cmds.c b/drivers/scsi/be2iscsi/be_cmds.c
index f008708..6709857 100644
--- a/drivers/scsi/be2iscsi/be_cmds.c
+++ b/drivers/scsi/be2iscsi/be_cmds.c
@@ -1,5 +1,5 @@
/**
- * Copyright (C) 2005 - 2009 ServerEngines
+ * Copyright (C) 2005 - 2010 ServerEngines
* All rights reserved.
*
* This program is free software; you can redistribute it and/or
@@ -19,7 +19,7 @@
#include "be_mgmt.h"
#include "be_main.h"
-static void be_mcc_notify(struct beiscsi_hba *phba)
+void be_mcc_notify(struct beiscsi_hba *phba)
{
struct be_queue_info *mccq = &phba->ctrl.mcc_obj.q;
u32 val = 0;
@@ -29,6 +29,52 @@
iowrite32(val, phba->db_va + DB_MCCQ_OFFSET);
}
+unsigned int alloc_mcc_tag(struct beiscsi_hba *phba)
+{
+ unsigned int tag = 0;
+ unsigned int num = 0;
+
+mcc_tag_rdy:
+ if (phba->ctrl.mcc_tag_available) {
+ tag = phba->ctrl.mcc_tag[phba->ctrl.mcc_alloc_index];
+ phba->ctrl.mcc_tag[phba->ctrl.mcc_alloc_index] = 0;
+ phba->ctrl.mcc_numtag[tag] = 0;
+ } else {
+ udelay(100);
+ num++;
+ if (num < mcc_timeout)
+ goto mcc_tag_rdy;
+ }
+ if (tag) {
+ phba->ctrl.mcc_tag_available--;
+ if (phba->ctrl.mcc_alloc_index == (MAX_MCC_CMD - 1))
+ phba->ctrl.mcc_alloc_index = 0;
+ else
+ phba->ctrl.mcc_alloc_index++;
+ }
+ return tag;
+}
+
+void free_mcc_tag(struct be_ctrl_info *ctrl, unsigned int tag)
+{
+ spin_lock(&ctrl->mbox_lock);
+ tag = tag & 0x000000FF;
+ ctrl->mcc_tag[ctrl->mcc_free_index] = tag;
+ if (ctrl->mcc_free_index == (MAX_MCC_CMD - 1))
+ ctrl->mcc_free_index = 0;
+ else
+ ctrl->mcc_free_index++;
+ ctrl->mcc_tag_available++;
+ spin_unlock(&ctrl->mbox_lock);
+}
+
+bool is_link_state_evt(u32 trailer)
+{
+ return (((trailer >> ASYNC_TRAILER_EVENT_CODE_SHIFT) &
+ ASYNC_TRAILER_EVENT_CODE_MASK) ==
+ ASYNC_EVENT_CODE_LINK_STATE);
+}
+
static inline bool be_mcc_compl_is_new(struct be_mcc_compl *compl)
{
if (compl->flags != 0) {
@@ -64,12 +110,30 @@
return 0;
}
-
-static inline bool is_link_state_evt(u32 trailer)
+int be_mcc_compl_process_isr(struct be_ctrl_info *ctrl,
+ struct be_mcc_compl *compl)
{
- return (((trailer >> ASYNC_TRAILER_EVENT_CODE_SHIFT) &
- ASYNC_TRAILER_EVENT_CODE_MASK) ==
- ASYNC_EVENT_CODE_LINK_STATE);
+ u16 compl_status, extd_status;
+ unsigned short tag;
+
+ be_dws_le_to_cpu(compl, 4);
+
+ compl_status = (compl->status >> CQE_STATUS_COMPL_SHIFT) &
+ CQE_STATUS_COMPL_MASK;
+ /* The ctrl.mcc_numtag[tag] is filled with
+ * [31] = valid, [30:24] = Rsvd, [23:16] = wrb, [15:8] = extd_status,
+ * [7:0] = compl_status
+ */
+ tag = (compl->tag0 & 0x000000FF);
+ extd_status = (compl->status >> CQE_STATUS_EXTD_SHIFT) &
+ CQE_STATUS_EXTD_MASK;
+
+ ctrl->mcc_numtag[tag] = 0x80000000;
+ ctrl->mcc_numtag[tag] |= (compl->tag0 & 0x00FF0000);
+ ctrl->mcc_numtag[tag] |= (extd_status & 0x000000FF) << 8;
+ ctrl->mcc_numtag[tag] |= (compl_status & 0x000000FF);
+ wake_up_interruptible(&ctrl->mcc_wait[tag]);
+ return 0;
}
static struct be_mcc_compl *be_mcc_compl_get(struct beiscsi_hba *phba)
@@ -89,7 +153,7 @@
iscsi_session_failure(cls_session->dd_data, ISCSI_ERR_CONN_FAILED);
}
-static void beiscsi_async_link_state_process(struct beiscsi_hba *phba,
+void beiscsi_async_link_state_process(struct beiscsi_hba *phba,
struct be_async_event_link_state *evt)
{
switch (evt->port_link_status) {
@@ -97,13 +161,13 @@
SE_DEBUG(DBG_LVL_1, "Link Down on Physical Port %d \n",
evt->physical_port);
phba->state |= BE_ADAPTER_LINK_DOWN;
+ iscsi_host_for_each_session(phba->shost,
+ be2iscsi_fail_session);
break;
case ASYNC_EVENT_LINK_UP:
phba->state = BE_ADAPTER_UP;
SE_DEBUG(DBG_LVL_1, "Link UP on Physical Port %d \n",
evt->physical_port);
- iscsi_host_for_each_session(phba->shost,
- be2iscsi_fail_session);
break;
default:
SE_DEBUG(DBG_LVL_1, "Unexpected Async Notification %d on"
@@ -162,7 +226,6 @@
/* Wait till no more pending mcc requests are present */
static int be_mcc_wait_compl(struct beiscsi_hba *phba)
{
-#define mcc_timeout 120000 /* 5s timeout */
int i, status;
for (i = 0; i < mcc_timeout; i++) {
status = beiscsi_process_mcc(phba);
@@ -372,9 +435,10 @@
BUG_ON(atomic_read(&mccq->used) >= mccq->len);
wrb = queue_head_node(mccq);
+ memset(wrb, 0, sizeof(*wrb));
+ wrb->tag0 = (mccq->head & 0x000000FF) << 16;
queue_head_inc(mccq);
atomic_inc(&mccq->used);
- memset(wrb, 0, sizeof(*wrb));
return wrb;
}
diff --git a/drivers/scsi/be2iscsi/be_cmds.h b/drivers/scsi/be2iscsi/be_cmds.h
index 5de8acb..49fcc78 100644
--- a/drivers/scsi/be2iscsi/be_cmds.h
+++ b/drivers/scsi/be2iscsi/be_cmds.h
@@ -1,5 +1,5 @@
/**
- * Copyright (C) 2005 - 2009 ServerEngines
+ * Copyright (C) 2005 - 2010 ServerEngines
* All rights reserved.
*
* This program is free software; you can redistribute it and/or
@@ -425,14 +425,20 @@
int be_poll_mcc(struct be_ctrl_info *ctrl);
unsigned char mgmt_check_supported_fw(struct be_ctrl_info *ctrl,
struct beiscsi_hba *phba);
-int be_cmd_get_mac_addr(struct beiscsi_hba *phba, u8 *mac_addr);
-
+unsigned int be_cmd_get_mac_addr(struct beiscsi_hba *phba);
+void free_mcc_tag(struct be_ctrl_info *ctrl, unsigned int tag);
/*ISCSI Functuions */
int be_cmd_fw_initialize(struct be_ctrl_info *ctrl);
struct be_mcc_wrb *wrb_from_mbox(struct be_dma_mem *mbox_mem);
struct be_mcc_wrb *wrb_from_mccq(struct beiscsi_hba *phba);
int be_mcc_notify_wait(struct beiscsi_hba *phba);
+void be_mcc_notify(struct beiscsi_hba *phba);
+unsigned int alloc_mcc_tag(struct beiscsi_hba *phba);
+void beiscsi_async_link_state_process(struct beiscsi_hba *phba,
+ struct be_async_event_link_state *evt);
+int be_mcc_compl_process_isr(struct be_ctrl_info *ctrl,
+ struct be_mcc_compl *compl);
int be_mbox_notify(struct be_ctrl_info *ctrl);
@@ -448,6 +454,8 @@
int be_cmd_wrbq_create(struct be_ctrl_info *ctrl, struct be_dma_mem *q_mem,
struct be_queue_info *wrbq);
+bool is_link_state_evt(u32 trailer);
+
struct be_default_pdu_context {
u32 dw[4];
} __packed;
diff --git a/drivers/scsi/be2iscsi/be_iscsi.c b/drivers/scsi/be2iscsi/be_iscsi.c
index d587b03..29a3aaf 100644
--- a/drivers/scsi/be2iscsi/be_iscsi.c
+++ b/drivers/scsi/be2iscsi/be_iscsi.c
@@ -1,5 +1,5 @@
/**
- * Copyright (C) 2005 - 2009 ServerEngines
+ * Copyright (C) 2005 - 2010 ServerEngines
* All rights reserved.
*
* This program is free software; you can redistribute it and/or
@@ -101,6 +101,7 @@
struct iscsi_session *sess = cls_session->dd_data;
struct beiscsi_session *beiscsi_sess = sess->dd_data;
+ SE_DEBUG(DBG_LVL_8, "In beiscsi_session_destroy\n");
pci_pool_destroy(beiscsi_sess->bhs_pool);
iscsi_session_teardown(cls_session);
}
@@ -224,6 +225,7 @@
struct beiscsi_conn *beiscsi_conn = conn->dd_data;
int len = 0;
+ SE_DEBUG(DBG_LVL_8, "In beiscsi_conn_get_param, param= %d\n", param);
beiscsi_ep = beiscsi_conn->ep;
if (!beiscsi_ep) {
SE_DEBUG(DBG_LVL_1,
@@ -254,6 +256,7 @@
struct iscsi_session *session = conn->session;
int ret;
+ SE_DEBUG(DBG_LVL_8, "In beiscsi_conn_set_param, param= %d\n", param);
ret = iscsi_set_param(cls_conn, param, buf, buflen);
if (ret)
return ret;
@@ -271,8 +274,8 @@
conn->max_recv_dlength = 65536;
break;
case ISCSI_PARAM_MAX_BURST:
- if (session->first_burst > 262144)
- session->first_burst = 262144;
+ if (session->max_burst > 262144)
+ session->max_burst = 262144;
break;
default:
return 0;
@@ -293,12 +296,41 @@
enum iscsi_host_param param, char *buf)
{
struct beiscsi_hba *phba = (struct beiscsi_hba *)iscsi_host_priv(shost);
+ struct be_cmd_resp_get_mac_addr *resp;
+ struct be_mcc_wrb *wrb;
+ unsigned int tag, wrb_num;
int len = 0;
+ unsigned short status, extd_status;
+ struct be_queue_info *mccq = &phba->ctrl.mcc_obj.q;
+ SE_DEBUG(DBG_LVL_8, "In beiscsi_get_host_param, param= %d\n", param);
switch (param) {
case ISCSI_HOST_PARAM_HWADDRESS:
- be_cmd_get_mac_addr(phba, phba->mac_address);
- len = sysfs_format_mac(buf, phba->mac_address, ETH_ALEN);
+ tag = be_cmd_get_mac_addr(phba);
+ if (!tag) {
+ SE_DEBUG(DBG_LVL_1, "be_cmd_get_mac_addr Failed \n");
+ return -1;
+ } else
+ wait_event_interruptible(phba->ctrl.mcc_wait[tag],
+ phba->ctrl.mcc_numtag[tag]);
+
+ wrb_num = (phba->ctrl.mcc_numtag[tag] & 0x00FF0000) >> 16;
+ extd_status = (phba->ctrl.mcc_numtag[tag] & 0x0000FF00) >> 8;
+ status = phba->ctrl.mcc_numtag[tag] & 0x000000FF;
+ if (status || extd_status) {
+ SE_DEBUG(DBG_LVL_1, "be_cmd_get_mac_addr Failed"
+ " status = %d extd_status = %d \n",
+ status, extd_status);
+ free_mcc_tag(&phba->ctrl, tag);
+ return -1;
+ } else {
+ wrb = queue_get_wrb(mccq, wrb_num);
+ free_mcc_tag(&phba->ctrl, tag);
+ resp = embedded_payload(wrb);
+ memcpy(phba->mac_address, resp->mac_address, ETH_ALEN);
+ len = sysfs_format_mac(buf, phba->mac_address,
+ ETH_ALEN);
+ }
break;
default:
return iscsi_host_get_param(shost, param, buf);
@@ -378,6 +410,7 @@
struct beiscsi_endpoint *beiscsi_ep;
struct beiscsi_offload_params params;
+ SE_DEBUG(DBG_LVL_8, "In beiscsi_conn_start\n");
memset(¶ms, 0, sizeof(struct beiscsi_offload_params));
beiscsi_ep = beiscsi_conn->ep;
if (!beiscsi_ep)
@@ -422,8 +455,14 @@
{
struct beiscsi_endpoint *beiscsi_ep = ep->dd_data;
struct beiscsi_hba *phba = beiscsi_ep->phba;
+ struct be_queue_info *mccq = &phba->ctrl.mcc_obj.q;
+ struct be_mcc_wrb *wrb;
+ struct tcp_connect_and_offload_out *ptcpcnct_out;
+ unsigned short status, extd_status;
+ unsigned int tag, wrb_num;
int ret = -1;
+ SE_DEBUG(DBG_LVL_8, "In beiscsi_open_conn\n");
beiscsi_ep->ep_cid = beiscsi_get_cid(phba);
if (beiscsi_ep->ep_cid == 0xFFFF) {
SE_DEBUG(DBG_LVL_1, "No free cid available\n");
@@ -431,15 +470,44 @@
}
SE_DEBUG(DBG_LVL_8, "In beiscsi_open_conn, ep_cid=%d ",
beiscsi_ep->ep_cid);
- phba->ep_array[beiscsi_ep->ep_cid] = ep;
- if (beiscsi_ep->ep_cid >
- (phba->fw_config.iscsi_cid_start + phba->params.cxns_per_ctrl)) {
+ phba->ep_array[beiscsi_ep->ep_cid -
+ phba->fw_config.iscsi_cid_start] = ep;
+ if (beiscsi_ep->ep_cid > (phba->fw_config.iscsi_cid_start +
+ phba->params.cxns_per_ctrl * 2)) {
SE_DEBUG(DBG_LVL_1, "Failed in allocate iscsi cid\n");
return ret;
}
beiscsi_ep->cid_vld = 0;
- return mgmt_open_connection(phba, dst_addr, beiscsi_ep);
+ tag = mgmt_open_connection(phba, dst_addr, beiscsi_ep);
+ if (!tag) {
+ SE_DEBUG(DBG_LVL_1,
+ "mgmt_invalidate_connection Failed for cid=%d \n",
+ beiscsi_ep->ep_cid);
+ } else {
+ wait_event_interruptible(phba->ctrl.mcc_wait[tag],
+ phba->ctrl.mcc_numtag[tag]);
+ }
+ wrb_num = (phba->ctrl.mcc_numtag[tag] & 0x00FF0000) >> 16;
+ extd_status = (phba->ctrl.mcc_numtag[tag] & 0x0000FF00) >> 8;
+ status = phba->ctrl.mcc_numtag[tag] & 0x000000FF;
+ if (status || extd_status) {
+ SE_DEBUG(DBG_LVL_1, "mgmt_open_connection Failed"
+ " status = %d extd_status = %d \n",
+ status, extd_status);
+ free_mcc_tag(&phba->ctrl, tag);
+ return -1;
+ } else {
+ wrb = queue_get_wrb(mccq, wrb_num);
+ free_mcc_tag(&phba->ctrl, tag);
+
+ ptcpcnct_out = embedded_payload(wrb);
+ beiscsi_ep = ep->dd_data;
+ beiscsi_ep->fw_handle = ptcpcnct_out->connection_handle;
+ beiscsi_ep->cid_vld = 1;
+ SE_DEBUG(DBG_LVL_8, "mgmt_open_connection Success\n");
+ }
+ return 0;
}
/**
@@ -459,14 +527,12 @@
* beiscsi_free_ep - free endpoint
* @ep: pointer to iscsi endpoint structure
*/
-static void beiscsi_free_ep(struct iscsi_endpoint *ep)
+static void beiscsi_free_ep(struct beiscsi_endpoint *beiscsi_ep)
{
- struct beiscsi_endpoint *beiscsi_ep = ep->dd_data;
struct beiscsi_hba *phba = beiscsi_ep->phba;
beiscsi_put_cid(phba, beiscsi_ep->ep_cid);
beiscsi_ep->phba = NULL;
- iscsi_destroy_endpoint(ep);
}
/**
@@ -495,9 +561,9 @@
return ERR_PTR(ret);
}
- if (phba->state) {
+ if (phba->state != BE_ADAPTER_UP) {
ret = -EBUSY;
- SE_DEBUG(DBG_LVL_1, "The Adapet state is Not UP \n");
+ SE_DEBUG(DBG_LVL_1, "The Adapter state is Not UP \n");
return ERR_PTR(ret);
}
@@ -509,9 +575,9 @@
beiscsi_ep = ep->dd_data;
beiscsi_ep->phba = phba;
-
+ beiscsi_ep->openiscsi_ep = ep;
if (beiscsi_open_conn(ep, NULL, dst_addr, non_blocking)) {
- SE_DEBUG(DBG_LVL_1, "Failed in allocate iscsi cid\n");
+ SE_DEBUG(DBG_LVL_1, "Failed in beiscsi_open_conn \n");
ret = -ENOMEM;
goto free_ep;
}
@@ -519,7 +585,7 @@
return ep;
free_ep:
- beiscsi_free_ep(ep);
+ beiscsi_free_ep(beiscsi_ep);
return ERR_PTR(ret);
}
@@ -546,20 +612,22 @@
* @ep: The iscsi endpoint
* @flag: The type of connection closure
*/
-static int beiscsi_close_conn(struct iscsi_endpoint *ep, int flag)
+static int beiscsi_close_conn(struct beiscsi_endpoint *beiscsi_ep, int flag)
{
int ret = 0;
- struct beiscsi_endpoint *beiscsi_ep = ep->dd_data;
+ unsigned int tag;
struct beiscsi_hba *phba = beiscsi_ep->phba;
- if (MGMT_STATUS_SUCCESS !=
- mgmt_upload_connection(phba, beiscsi_ep->ep_cid,
- CONNECTION_UPLOAD_GRACEFUL)) {
+ tag = mgmt_upload_connection(phba, beiscsi_ep->ep_cid, flag);
+ if (!tag) {
SE_DEBUG(DBG_LVL_8, "upload failed for cid 0x%x",
beiscsi_ep->ep_cid);
ret = -1;
+ } else {
+ wait_event_interruptible(phba->ctrl.mcc_wait[tag],
+ phba->ctrl.mcc_numtag[tag]);
+ free_mcc_tag(&phba->ctrl, tag);
}
-
return ret;
}
@@ -574,19 +642,17 @@
struct beiscsi_conn *beiscsi_conn;
struct beiscsi_endpoint *beiscsi_ep;
struct beiscsi_hba *phba;
- int flag = 0;
beiscsi_ep = ep->dd_data;
phba = beiscsi_ep->phba;
- SE_DEBUG(DBG_LVL_8, "In beiscsi_ep_disconnect\n");
+ SE_DEBUG(DBG_LVL_8, "In beiscsi_ep_disconnect for ep_cid = %d\n",
+ beiscsi_ep->ep_cid);
if (beiscsi_ep->conn) {
beiscsi_conn = beiscsi_ep->conn;
iscsi_suspend_queue(beiscsi_conn->conn);
- beiscsi_close_conn(ep, flag);
}
- beiscsi_free_ep(ep);
}
/**
@@ -619,23 +685,31 @@
struct iscsi_session *session = conn->session;
struct Scsi_Host *shost = iscsi_session_to_shost(session->cls_session);
struct beiscsi_hba *phba = iscsi_host_priv(shost);
- unsigned int status;
+ unsigned int tag;
unsigned short savecfg_flag = CMD_ISCSI_SESSION_SAVE_CFG_ON_FLASH;
- SE_DEBUG(DBG_LVL_8, "In beiscsi_conn_stop\n");
beiscsi_ep = beiscsi_conn->ep;
if (!beiscsi_ep) {
SE_DEBUG(DBG_LVL_8, "In beiscsi_conn_stop , no beiscsi_ep\n");
return;
}
- status = mgmt_invalidate_connection(phba, beiscsi_ep,
+ SE_DEBUG(DBG_LVL_8, "In beiscsi_conn_stop ep_cid = %d\n",
+ beiscsi_ep->ep_cid);
+ tag = mgmt_invalidate_connection(phba, beiscsi_ep,
beiscsi_ep->ep_cid, 1,
savecfg_flag);
- if (status != MGMT_STATUS_SUCCESS) {
+ if (!tag) {
SE_DEBUG(DBG_LVL_1,
"mgmt_invalidate_connection Failed for cid=%d \n",
beiscsi_ep->ep_cid);
+ } else {
+ wait_event_interruptible(phba->ctrl.mcc_wait[tag],
+ phba->ctrl.mcc_numtag[tag]);
+ free_mcc_tag(&phba->ctrl, tag);
}
+ beiscsi_close_conn(beiscsi_ep, CONNECTION_UPLOAD_GRACEFUL);
+ beiscsi_free_ep(beiscsi_ep);
+ iscsi_destroy_endpoint(beiscsi_ep->openiscsi_ep);
beiscsi_unbind_conn_to_cid(phba, beiscsi_ep->ep_cid);
iscsi_conn_stop(cls_conn, flag);
}
diff --git a/drivers/scsi/be2iscsi/be_iscsi.h b/drivers/scsi/be2iscsi/be_iscsi.h
index f92ffc5..1f512c2 100644
--- a/drivers/scsi/be2iscsi/be_iscsi.h
+++ b/drivers/scsi/be2iscsi/be_iscsi.h
@@ -1,5 +1,5 @@
/**
- * Copyright (C) 2005 - 2009 ServerEngines
+ * Copyright (C) 2005 - 2010 ServerEngines
* All rights reserved.
*
* This program is free software; you can redistribute it and/or
diff --git a/drivers/scsi/be2iscsi/be_main.c b/drivers/scsi/be2iscsi/be_main.c
index 1a557fa..7c22616 100644
--- a/drivers/scsi/be2iscsi/be_main.c
+++ b/drivers/scsi/be2iscsi/be_main.c
@@ -1,5 +1,5 @@
/**
- * Copyright (C) 2005 - 2009 ServerEngines
+ * Copyright (C) 2005 - 2010 ServerEngines
* All rights reserved.
*
* This program is free software; you can redistribute it and/or
@@ -40,7 +40,6 @@
static unsigned int be_iopoll_budget = 10;
static unsigned int be_max_phys_size = 64;
static unsigned int enable_msix = 1;
-static unsigned int ring_mode;
MODULE_DEVICE_TABLE(pci, beiscsi_pci_id_table);
MODULE_DESCRIPTION(DRV_DESC " " BUILD_STR);
@@ -62,10 +61,10 @@
/*------------------- PCI Driver operations and data ----------------- */
static DEFINE_PCI_DEVICE_TABLE(beiscsi_pci_id_table) = {
{ PCI_DEVICE(BE_VENDOR_ID, BE_DEVICE_ID1) },
+ { PCI_DEVICE(BE_VENDOR_ID, BE_DEVICE_ID2) },
{ PCI_DEVICE(BE_VENDOR_ID, OC_DEVICE_ID1) },
{ PCI_DEVICE(BE_VENDOR_ID, OC_DEVICE_ID2) },
{ PCI_DEVICE(BE_VENDOR_ID, OC_DEVICE_ID3) },
- { PCI_DEVICE(BE_VENDOR_ID, OC_DEVICE_ID4) },
{ 0 }
};
MODULE_DEVICE_TABLE(pci, beiscsi_pci_id_table);
@@ -112,6 +111,7 @@
memset(phba, 0, sizeof(*phba));
phba->shost = shost;
phba->pcidev = pci_dev_get(pcidev);
+ pci_set_drvdata(pcidev, phba);
if (iscsi_host_add(shost, &phba->pcidev->dev))
goto free_devices;
@@ -143,6 +143,7 @@
struct pci_dev *pcidev)
{
u8 __iomem *addr;
+ int pcicfg_reg;
addr = ioremap_nocache(pci_resource_start(pcidev, 2),
pci_resource_len(pcidev, 2));
@@ -159,13 +160,19 @@
phba->db_va = addr;
phba->db_pa.u.a64.address = pci_resource_start(pcidev, 4);
- addr = ioremap_nocache(pci_resource_start(pcidev, 1),
- pci_resource_len(pcidev, 1));
+ if (phba->generation == BE_GEN2)
+ pcicfg_reg = 1;
+ else
+ pcicfg_reg = 0;
+
+ addr = ioremap_nocache(pci_resource_start(pcidev, pcicfg_reg),
+ pci_resource_len(pcidev, pcicfg_reg));
+
if (addr == NULL)
goto pci_map_err;
phba->ctrl.pcicfg = addr;
phba->pci_va = addr;
- phba->pci_pa.u.a64.address = pci_resource_start(pcidev, 1);
+ phba->pci_pa.u.a64.address = pci_resource_start(pcidev, pcicfg_reg);
return 0;
pci_map_err:
@@ -230,29 +237,27 @@
static void beiscsi_get_params(struct beiscsi_hba *phba)
{
- phba->params.ios_per_ctrl = BE2_IO_DEPTH;
- phba->params.cxns_per_ctrl = BE2_MAX_SESSIONS;
- phba->params.asyncpdus_per_ctrl = BE2_ASYNCPDUS;
- phba->params.icds_per_ctrl = BE2_MAX_ICDS / 2;
+ phba->params.ios_per_ctrl = (phba->fw_config.iscsi_icd_count
+ - (phba->fw_config.iscsi_cid_count
+ + BE2_TMFS
+ + BE2_NOPOUT_REQ));
+ phba->params.cxns_per_ctrl = phba->fw_config.iscsi_cid_count;
+ phba->params.asyncpdus_per_ctrl = phba->fw_config.iscsi_cid_count;;
+ phba->params.icds_per_ctrl = phba->fw_config.iscsi_icd_count;;
phba->params.num_sge_per_io = BE2_SGE;
phba->params.defpdu_hdr_sz = BE2_DEFPDU_HDR_SZ;
phba->params.defpdu_data_sz = BE2_DEFPDU_DATA_SZ;
phba->params.eq_timer = 64;
phba->params.num_eq_entries =
- (((BE2_CMDS_PER_CXN * 2 + BE2_LOGOUTS + BE2_TMFS + BE2_ASYNCPDUS) /
- 512) + 1) * 512;
+ (((BE2_CMDS_PER_CXN * 2 + phba->fw_config.iscsi_cid_count * 2
+ + BE2_TMFS) / 512) + 1) * 512;
phba->params.num_eq_entries = (phba->params.num_eq_entries < 1024)
? 1024 : phba->params.num_eq_entries;
SE_DEBUG(DBG_LVL_8, "phba->params.num_eq_entries=%d \n",
- phba->params.num_eq_entries);
+ phba->params.num_eq_entries);
phba->params.num_cq_entries =
- (((BE2_CMDS_PER_CXN * 2 + BE2_LOGOUTS + BE2_TMFS + BE2_ASYNCPDUS) /
- 512) + 1) * 512;
- SE_DEBUG(DBG_LVL_8,
- "phba->params.num_cq_entries=%d BE2_CMDS_PER_CXN=%d"
- "BE2_LOGOUTS=%d BE2_TMFS=%d BE2_ASYNCPDUS=%d \n",
- phba->params.num_cq_entries, BE2_CMDS_PER_CXN,
- BE2_LOGOUTS, BE2_TMFS, BE2_ASYNCPDUS);
+ (((BE2_CMDS_PER_CXN * 2 + phba->fw_config.iscsi_cid_count * 2
+ + BE2_TMFS) / 512) + 1) * 512;
phba->params.wrbs_per_cxn = 256;
}
@@ -443,7 +448,7 @@
if (phba->todo_mcc_cq)
queue_work(phba->wq, &phba->work_cqs);
- if ((num_mcceq_processed) && (!num_ioeq_processed))
+ if ((num_mcceq_processed) && (!num_ioeq_processed))
hwi_ring_eq_db(phba, eq->id, 0,
(num_ioeq_processed +
num_mcceq_processed) , 1, 1);
@@ -561,6 +566,7 @@
SE_DEBUG(DBG_LVL_1, "In ISCSI_OP_REJECT\n");
break;
case ISCSI_OP_LOGIN_RSP:
+ case ISCSI_OP_TEXT_RSP:
task = conn->login_task;
io_task = task->dd_data;
login_hdr = (struct iscsi_hdr *)ppdu;
@@ -631,29 +637,29 @@
* alloc_wrb_handle - To allocate a wrb handle
* @phba: The hba pointer
* @cid: The cid to use for allocation
- * @index: index allocation and wrb index
*
* This happens under session_lock until submission to chip
*/
-struct wrb_handle *alloc_wrb_handle(struct beiscsi_hba *phba, unsigned int cid,
- int index)
+struct wrb_handle *alloc_wrb_handle(struct beiscsi_hba *phba, unsigned int cid)
{
struct hwi_wrb_context *pwrb_context;
struct hwi_controller *phwi_ctrlr;
- struct wrb_handle *pwrb_handle;
+ struct wrb_handle *pwrb_handle, *pwrb_handle_tmp;
phwi_ctrlr = phba->phwi_ctrlr;
pwrb_context = &phwi_ctrlr->wrb_context[cid];
- if (pwrb_context->wrb_handles_available) {
+ if (pwrb_context->wrb_handles_available >= 2) {
pwrb_handle = pwrb_context->pwrb_handle_base[
pwrb_context->alloc_index];
pwrb_context->wrb_handles_available--;
- pwrb_handle->nxt_wrb_index = pwrb_handle->wrb_index;
if (pwrb_context->alloc_index ==
(phba->params.wrbs_per_cxn - 1))
pwrb_context->alloc_index = 0;
else
pwrb_context->alloc_index++;
+ pwrb_handle_tmp = pwrb_context->pwrb_handle_base[
+ pwrb_context->alloc_index];
+ pwrb_handle->nxt_wrb_index = pwrb_handle_tmp->wrb_index;
} else
pwrb_handle = NULL;
return pwrb_handle;
@@ -671,9 +677,7 @@
free_wrb_handle(struct beiscsi_hba *phba, struct hwi_wrb_context *pwrb_context,
struct wrb_handle *pwrb_handle)
{
- if (!ring_mode)
- pwrb_context->pwrb_handle_base[pwrb_context->free_index] =
- pwrb_handle;
+ pwrb_context->pwrb_handle_base[pwrb_context->free_index] = pwrb_handle;
pwrb_context->wrb_handles_available++;
if (pwrb_context->free_index == (phba->params.wrbs_per_cxn - 1))
pwrb_context->free_index = 0;
@@ -790,6 +794,7 @@
memcpy(task->sc->sense_buffer, sense,
min_t(u16, sense_len, SCSI_SENSE_BUFFERSIZE));
}
+
if (io_task->cmd_bhs->iscsi_hdr.flags & ISCSI_FLAG_CMD_READ) {
if (psol->dw[offsetof(struct amap_sol_cqe, i_res_cnt) / 32]
& SOL_RES_CNT_MASK)
@@ -811,6 +816,7 @@
struct iscsi_conn *conn = beiscsi_conn->conn;
hdr = (struct iscsi_logout_rsp *)task->hdr;
+ hdr->opcode = ISCSI_OP_LOGOUT_RSP;
hdr->t2wait = 5;
hdr->t2retain = 0;
hdr->flags = ((psol->dw[offsetof(struct amap_sol_cqe, i_flags) / 32]
@@ -825,6 +831,9 @@
& SOL_EXP_CMD_SN_MASK) +
((psol->dw[offsetof(struct amap_sol_cqe, i_cmd_wnd)
/ 32] & SOL_CMD_WND_MASK) >> 24) - 1);
+ hdr->dlength[0] = 0;
+ hdr->dlength[1] = 0;
+ hdr->dlength[2] = 0;
hdr->hlength = 0;
hdr->itt = io_task->libiscsi_itt;
__iscsi_complete_pdu(conn, (struct iscsi_hdr *)hdr, NULL, 0);
@@ -839,6 +848,7 @@
struct beiscsi_io_task *io_task = task->dd_data;
hdr = (struct iscsi_tm_rsp *)task->hdr;
+ hdr->opcode = ISCSI_OP_SCSI_TMFUNC_RSP;
hdr->flags = ((psol->dw[offsetof(struct amap_sol_cqe, i_flags) / 32]
& SOL_FLAGS_MASK) >> 24) | 0x80;
hdr->response = (psol->dw[offsetof(struct amap_sol_cqe, i_resp) /
@@ -859,7 +869,6 @@
{
struct hwi_wrb_context *pwrb_context;
struct wrb_handle *pwrb_handle = NULL;
- struct sgl_handle *psgl_handle = NULL;
struct hwi_controller *phwi_ctrlr;
struct iscsi_task *task;
struct beiscsi_io_task *io_task;
@@ -867,22 +876,14 @@
struct iscsi_session *session = conn->session;
phwi_ctrlr = phba->phwi_ctrlr;
- if (ring_mode) {
- psgl_handle = phba->sgl_hndl_array[((psol->
- dw[offsetof(struct amap_sol_cqe_ring, icd_index) /
- 32] & SOL_ICD_INDEX_MASK) >> 6)];
- pwrb_context = &phwi_ctrlr->wrb_context[psgl_handle->cid];
- task = psgl_handle->task;
- pwrb_handle = NULL;
- } else {
- pwrb_context = &phwi_ctrlr->wrb_context[((psol->
+ pwrb_context = &phwi_ctrlr->wrb_context[((psol->
dw[offsetof(struct amap_sol_cqe, cid) / 32] &
- SOL_CID_MASK) >> 6)];
- pwrb_handle = pwrb_context->pwrb_handle_basestd[((psol->
+ SOL_CID_MASK) >> 6) -
+ phba->fw_config.iscsi_cid_start];
+ pwrb_handle = pwrb_context->pwrb_handle_basestd[((psol->
dw[offsetof(struct amap_sol_cqe, wrb_index) /
32] & SOL_WRB_INDEX_MASK) >> 16)];
- task = pwrb_handle->pio_handle;
- }
+ task = pwrb_handle->pio_handle;
io_task = task->dd_data;
spin_lock(&phba->mgmt_sgl_lock);
@@ -923,31 +924,23 @@
struct iscsi_wrb *pwrb = NULL;
struct hwi_controller *phwi_ctrlr;
struct iscsi_task *task;
- struct sgl_handle *psgl_handle = NULL;
unsigned int type;
struct iscsi_conn *conn = beiscsi_conn->conn;
struct iscsi_session *session = conn->session;
phwi_ctrlr = phba->phwi_ctrlr;
- if (ring_mode) {
- psgl_handle = phba->sgl_hndl_array[((psol->
- dw[offsetof(struct amap_sol_cqe_ring, icd_index) /
- 32] & SOL_ICD_INDEX_MASK) >> 6)];
- task = psgl_handle->task;
- type = psgl_handle->type;
- } else {
- pwrb_context = &phwi_ctrlr->
- wrb_context[((psol->dw[offsetof
+ pwrb_context = &phwi_ctrlr->wrb_context[((psol->dw[offsetof
(struct amap_sol_cqe, cid) / 32]
- & SOL_CID_MASK) >> 6)];
- pwrb_handle = pwrb_context->pwrb_handle_basestd[((psol->
+ & SOL_CID_MASK) >> 6) -
+ phba->fw_config.iscsi_cid_start];
+ pwrb_handle = pwrb_context->pwrb_handle_basestd[((psol->
dw[offsetof(struct amap_sol_cqe, wrb_index) /
32] & SOL_WRB_INDEX_MASK) >> 16)];
- task = pwrb_handle->pio_handle;
- pwrb = pwrb_handle->pwrb;
- type = (pwrb->dw[offsetof(struct amap_iscsi_wrb, type) / 32] &
- WRB_TYPE_MASK) >> 28;
- }
+ task = pwrb_handle->pio_handle;
+ pwrb = pwrb_handle->pwrb;
+ type = (pwrb->dw[offsetof(struct amap_iscsi_wrb, type) / 32] &
+ WRB_TYPE_MASK) >> 28;
+
spin_lock_bh(&session->lock);
switch (type) {
case HWH_TYPE_IO:
@@ -978,15 +971,7 @@
break;
default:
- if (ring_mode)
- shost_printk(KERN_WARNING, phba->shost,
- "In hwi_complete_cmd, unknown type = %d"
- "icd_index 0x%x CID 0x%x\n", type,
- ((psol->dw[offsetof(struct amap_sol_cqe_ring,
- icd_index) / 32] & SOL_ICD_INDEX_MASK) >> 6),
- psgl_handle->cid);
- else
- shost_printk(KERN_WARNING, phba->shost,
+ shost_printk(KERN_WARNING, phba->shost,
"In hwi_complete_cmd, unknown type = %d"
"wrb_index 0x%x CID 0x%x\n", type,
((psol->dw[offsetof(struct amap_iscsi_wrb,
@@ -1077,7 +1062,8 @@
WARN_ON(!pasync_handle);
- pasync_handle->cri = (unsigned short)beiscsi_conn->beiscsi_conn_cid;
+ pasync_handle->cri = (unsigned short)beiscsi_conn->beiscsi_conn_cid -
+ phba->fw_config.iscsi_cid_start;
pasync_handle->is_header = is_header;
pasync_handle->buffer_len = ((pdpdu_cqe->
dw[offsetof(struct amap_i_t_dpdu_cqe, dpl) / 32]
@@ -1327,9 +1313,10 @@
}
status = beiscsi_process_async_pdu(beiscsi_conn, phba,
- beiscsi_conn->beiscsi_conn_cid,
- phdr, hdr_len, pfirst_buffer,
- buf_len);
+ (beiscsi_conn->beiscsi_conn_cid -
+ phba->fw_config.iscsi_cid_start),
+ phdr, hdr_len, pfirst_buffer,
+ buf_len);
if (status == 0)
hwi_free_async_msg(phba, cri);
@@ -1422,6 +1409,48 @@
hwi_post_async_buffers(phba, pasync_handle->is_header);
}
+static void beiscsi_process_mcc_isr(struct beiscsi_hba *phba)
+{
+ struct be_queue_info *mcc_cq;
+ struct be_mcc_compl *mcc_compl;
+ unsigned int num_processed = 0;
+
+ mcc_cq = &phba->ctrl.mcc_obj.cq;
+ mcc_compl = queue_tail_node(mcc_cq);
+ mcc_compl->flags = le32_to_cpu(mcc_compl->flags);
+ while (mcc_compl->flags & CQE_FLAGS_VALID_MASK) {
+
+ if (num_processed >= 32) {
+ hwi_ring_cq_db(phba, mcc_cq->id,
+ num_processed, 0, 0);
+ num_processed = 0;
+ }
+ if (mcc_compl->flags & CQE_FLAGS_ASYNC_MASK) {
+ /* Interpret flags as an async trailer */
+ if (is_link_state_evt(mcc_compl->flags))
+ /* Interpret compl as a async link evt */
+ beiscsi_async_link_state_process(phba,
+ (struct be_async_event_link_state *) mcc_compl);
+ else
+ SE_DEBUG(DBG_LVL_1,
+ " Unsupported Async Event, flags"
+ " = 0x%08x \n", mcc_compl->flags);
+ } else if (mcc_compl->flags & CQE_FLAGS_COMPLETED_MASK) {
+ be_mcc_compl_process_isr(&phba->ctrl, mcc_compl);
+ atomic_dec(&phba->ctrl.mcc_obj.q.used);
+ }
+
+ mcc_compl->flags = 0;
+ queue_tail_inc(mcc_cq);
+ mcc_compl = queue_tail_node(mcc_cq);
+ mcc_compl->flags = le32_to_cpu(mcc_compl->flags);
+ num_processed++;
+ }
+
+ if (num_processed > 0)
+ hwi_ring_cq_db(phba, mcc_cq->id, num_processed, 1, 0);
+
+}
static unsigned int beiscsi_process_cq(struct be_eq_obj *pbe_eq)
{
@@ -1431,7 +1460,8 @@
unsigned int num_processed = 0;
unsigned int tot_nump = 0;
struct beiscsi_conn *beiscsi_conn;
- struct sgl_handle *psgl_handle = NULL;
+ struct beiscsi_endpoint *beiscsi_ep;
+ struct iscsi_endpoint *ep;
struct beiscsi_hba *phba;
cq = pbe_eq->cq;
@@ -1442,32 +1472,13 @@
CQE_VALID_MASK) {
be_dws_le_to_cpu(sol, sizeof(struct sol_cqe));
- if (ring_mode) {
- psgl_handle = phba->sgl_hndl_array[((sol->
- dw[offsetof(struct amap_sol_cqe_ring,
- icd_index) / 32] & SOL_ICD_INDEX_MASK)
- >> 6)];
- beiscsi_conn = phba->conn_table[psgl_handle->cid];
- if (!beiscsi_conn || !beiscsi_conn->ep) {
- shost_printk(KERN_WARNING, phba->shost,
- "Connection table empty for cid = %d\n",
- psgl_handle->cid);
- return 0;
- }
+ ep = phba->ep_array[(u32) ((sol->
+ dw[offsetof(struct amap_sol_cqe, cid) / 32] &
+ SOL_CID_MASK) >> 6) -
+ phba->fw_config.iscsi_cid_start];
- } else {
- beiscsi_conn = phba->conn_table[(u32) (sol->
- dw[offsetof(struct amap_sol_cqe, cid) / 32] &
- SOL_CID_MASK) >> 6];
-
- if (!beiscsi_conn || !beiscsi_conn->ep) {
- shost_printk(KERN_WARNING, phba->shost,
- "Connection table empty for cid = %d\n",
- (u32)(sol->dw[offsetof(struct amap_sol_cqe,
- cid) / 32] & SOL_CID_MASK) >> 6);
- return 0;
- }
- }
+ beiscsi_ep = ep->dd_data;
+ beiscsi_conn = beiscsi_ep->conn;
if (num_processed >= 32) {
hwi_ring_cq_db(phba, cq->id,
@@ -1511,21 +1522,13 @@
case CMD_CXN_KILLED_ITT_INVALID:
case CMD_CXN_KILLED_SEQ_OUTOFORDER:
case CMD_CXN_KILLED_INVALID_DATASN_RCVD:
- if (ring_mode) {
- SE_DEBUG(DBG_LVL_1,
- "CQ Error notification for cmd.. "
- "code %d cid 0x%x\n",
- sol->dw[offsetof(struct amap_sol_cqe, code) /
- 32] & CQE_CODE_MASK, psgl_handle->cid);
- } else {
- SE_DEBUG(DBG_LVL_1,
+ SE_DEBUG(DBG_LVL_1,
"CQ Error notification for cmd.. "
"code %d cid 0x%x\n",
sol->dw[offsetof(struct amap_sol_cqe, code) /
32] & CQE_CODE_MASK,
(sol->dw[offsetof(struct amap_sol_cqe, cid) /
32] & SOL_CID_MASK));
- }
break;
case UNSOL_DATA_DIGEST_ERROR_NOTIFY:
SE_DEBUG(DBG_LVL_1,
@@ -1547,37 +1550,23 @@
case CXN_KILLED_OVER_RUN_RESIDUAL:
case CXN_KILLED_UNDER_RUN_RESIDUAL:
case CXN_KILLED_CMND_DATA_NOT_ON_SAME_CONN:
- if (ring_mode) {
- SE_DEBUG(DBG_LVL_1, "CQ Error %d, reset CID "
- "0x%x...\n",
- sol->dw[offsetof(struct amap_sol_cqe, code) /
- 32] & CQE_CODE_MASK, psgl_handle->cid);
- } else {
- SE_DEBUG(DBG_LVL_1, "CQ Error %d, reset CID "
+ SE_DEBUG(DBG_LVL_1, "CQ Error %d, reset CID "
"0x%x...\n",
sol->dw[offsetof(struct amap_sol_cqe, code) /
32] & CQE_CODE_MASK,
- sol->dw[offsetof(struct amap_sol_cqe, cid) /
- 32] & CQE_CID_MASK);
- }
+ (sol->dw[offsetof(struct amap_sol_cqe, cid) /
+ 32] & CQE_CID_MASK));
iscsi_conn_failure(beiscsi_conn->conn,
ISCSI_ERR_CONN_FAILED);
break;
case CXN_KILLED_RST_SENT:
case CXN_KILLED_RST_RCVD:
- if (ring_mode) {
- SE_DEBUG(DBG_LVL_1, "CQ Error %d, reset"
- "received/sent on CID 0x%x...\n",
- sol->dw[offsetof(struct amap_sol_cqe, code) /
- 32] & CQE_CODE_MASK, psgl_handle->cid);
- } else {
- SE_DEBUG(DBG_LVL_1, "CQ Error %d, reset"
+ SE_DEBUG(DBG_LVL_1, "CQ Error %d, reset"
"received/sent on CID 0x%x...\n",
sol->dw[offsetof(struct amap_sol_cqe, code) /
32] & CQE_CODE_MASK,
- sol->dw[offsetof(struct amap_sol_cqe, cid) /
- 32] & CQE_CID_MASK);
- }
+ (sol->dw[offsetof(struct amap_sol_cqe, cid) /
+ 32] & CQE_CID_MASK));
iscsi_conn_failure(beiscsi_conn->conn,
ISCSI_ERR_CONN_FAILED);
break;
@@ -1586,8 +1575,8 @@
"received on CID 0x%x...\n",
sol->dw[offsetof(struct amap_sol_cqe, code) /
32] & CQE_CODE_MASK,
- sol->dw[offsetof(struct amap_sol_cqe, cid) /
- 32] & CQE_CID_MASK);
+ (sol->dw[offsetof(struct amap_sol_cqe, cid) /
+ 32] & CQE_CID_MASK));
break;
}
@@ -1604,7 +1593,7 @@
return tot_nump;
}
-static void beiscsi_process_all_cqs(struct work_struct *work)
+void beiscsi_process_all_cqs(struct work_struct *work)
{
unsigned long flags;
struct hwi_controller *phwi_ctrlr;
@@ -1624,6 +1613,7 @@
spin_lock_irqsave(&phba->isr_lock, flags);
phba->todo_mcc_cq = 0;
spin_unlock_irqrestore(&phba->isr_lock, flags);
+ beiscsi_process_mcc_isr(phba);
}
if (phba->todo_cq) {
@@ -1668,7 +1658,8 @@
io_task->bhs_pa.u.a32.address_hi);
l_sg = sg;
- for (index = 0; (index < num_sg) && (index < 2); index++, sg_next(sg)) {
+ for (index = 0; (index < num_sg) && (index < 2); index++,
+ sg = sg_next(sg)) {
if (index == 0) {
sg_len = sg_dma_len(sg);
addr = (u64) sg_dma_address(sg);
@@ -1679,11 +1670,7 @@
AMAP_SET_BITS(struct amap_iscsi_wrb, sge0_len, pwrb,
sg_len);
sge_len = sg_len;
- AMAP_SET_BITS(struct amap_iscsi_wrb, sge0_last, pwrb,
- 1);
} else {
- AMAP_SET_BITS(struct amap_iscsi_wrb, sge0_last, pwrb,
- 0);
AMAP_SET_BITS(struct amap_iscsi_wrb, sge1_r2t_offset,
pwrb, sge_len);
sg_len = sg_dma_len(sg);
@@ -1706,13 +1693,27 @@
AMAP_SET_BITS(struct amap_iscsi_sge, addr_lo, psgl,
io_task->bhs_pa.u.a32.address_lo);
- if (num_sg == 2)
- AMAP_SET_BITS(struct amap_iscsi_wrb, sge1_last, pwrb, 1);
+ if (num_sg == 1) {
+ AMAP_SET_BITS(struct amap_iscsi_wrb, sge0_last, pwrb,
+ 1);
+ AMAP_SET_BITS(struct amap_iscsi_wrb, sge1_last, pwrb,
+ 0);
+ } else if (num_sg == 2) {
+ AMAP_SET_BITS(struct amap_iscsi_wrb, sge0_last, pwrb,
+ 0);
+ AMAP_SET_BITS(struct amap_iscsi_wrb, sge1_last, pwrb,
+ 1);
+ } else {
+ AMAP_SET_BITS(struct amap_iscsi_wrb, sge0_last, pwrb,
+ 0);
+ AMAP_SET_BITS(struct amap_iscsi_wrb, sge1_last, pwrb,
+ 0);
+ }
sg = l_sg;
psgl++;
psgl++;
offset = 0;
- for (index = 0; index < num_sg; index++, sg_next(sg), psgl++) {
+ for (index = 0; index < num_sg; index++, sg = sg_next(sg), psgl++) {
sg_len = sg_dma_len(sg);
addr = (u64) sg_dma_address(sg);
AMAP_SET_BITS(struct amap_iscsi_sge, addr_lo, psgl,
@@ -2048,10 +2049,9 @@
}
idx = 0;
pwrb = mem_descr_wrb->mem_array[idx].virtual_address;
- num_cxn_wrb =
- ((mem_descr_wrb->mem_array[idx].size) / (sizeof(struct iscsi_wrb)) *
- phba->params.wrbs_per_cxn);
-
+ num_cxn_wrb = (mem_descr_wrb->mem_array[idx].size) /
+ ((sizeof(struct iscsi_wrb) *
+ phba->params.wrbs_per_cxn));
for (index = 0; index < phba->params.cxns_per_ctrl; index += 2) {
pwrb_context = &phwi_ctrlr->wrb_context[index];
if (num_cxn_wrb) {
@@ -2064,9 +2064,9 @@
} else {
idx++;
pwrb = mem_descr_wrb->mem_array[idx].virtual_address;
- num_cxn_wrb = ((mem_descr_wrb->mem_array[idx].size) /
- (sizeof(struct iscsi_wrb)) *
- phba->params.wrbs_per_cxn);
+ num_cxn_wrb = (mem_descr_wrb->mem_array[idx].size) /
+ ((sizeof(struct iscsi_wrb) *
+ phba->params.wrbs_per_cxn));
for (j = 0; j < phba->params.wrbs_per_cxn; j++) {
pwrb_handle = pwrb_context->pwrb_handle_base[j];
pwrb_handle->pwrb = pwrb;
@@ -2383,7 +2383,7 @@
&paddr);
if (!cq_vaddress)
goto create_cq_error;
- ret = be_fill_queue(cq, phba->params.icds_per_ctrl / 2,
+ ret = be_fill_queue(cq, phba->params.num_cq_entries,
sizeof(struct sol_cqe), cq_vaddress);
if (ret) {
shost_printk(KERN_ERR, phba->shost,
@@ -2634,7 +2634,8 @@
"wrbq create failed.");
return status;
}
- phwi_ctrlr->wrb_context[i].cid = phwi_context->be_wrbq[i].id;
+ phwi_ctrlr->wrb_context[i * 2].cid = phwi_context->be_wrbq[i].
+ id;
}
kfree(pwrb_arr);
return 0;
@@ -2803,17 +2804,6 @@
goto error;
}
- if (phba->fw_config.iscsi_features == 0x1)
- ring_mode = 1;
- else
- ring_mode = 0;
- status = mgmt_get_fw_config(ctrl, phba);
- if (status != 0) {
- shost_printk(KERN_ERR, phba->shost,
- "Error getting fw config\n");
- goto error;
- }
-
status = beiscsi_create_cqs(phba, phwi_context);
if (status != 0) {
shost_printk(KERN_ERR, phba->shost, "CQ not created\n");
@@ -2941,17 +2931,6 @@
phba->io_sgl_hndl_avbl = 0;
phba->eh_sgl_hndl_avbl = 0;
- if (ring_mode) {
- phba->sgl_hndl_array = kzalloc(sizeof(struct sgl_handle *) *
- phba->params.icds_per_ctrl,
- GFP_KERNEL);
- if (!phba->sgl_hndl_array) {
- shost_printk(KERN_ERR, phba->shost,
- "Mem Alloc Failed. Failing to load\n");
- return -ENOMEM;
- }
- }
-
mem_descr_sglh = phba->init_mem;
mem_descr_sglh += HWI_MEM_SGLH;
if (1 == mem_descr_sglh->num_elements) {
@@ -2959,8 +2938,6 @@
phba->params.ios_per_ctrl,
GFP_KERNEL);
if (!phba->io_sgl_hndl_base) {
- if (ring_mode)
- kfree(phba->sgl_hndl_array);
shost_printk(KERN_ERR, phba->shost,
"Mem Alloc Failed. Failing to load\n");
return -ENOMEM;
@@ -3032,7 +3009,7 @@
AMAP_SET_BITS(struct amap_iscsi_sge, addr_lo, pfrag, 0);
pfrag += phba->params.num_sge_per_io;
psgl_handle->sgl_index =
- phba->fw_config.iscsi_cid_start + arr_index++;
+ phba->fw_config.iscsi_icd_start + arr_index++;
}
idx++;
}
@@ -3047,7 +3024,7 @@
{
int i, new_cid;
- phba->cid_array = kmalloc(sizeof(void *) * phba->params.cxns_per_ctrl,
+ phba->cid_array = kzalloc(sizeof(void *) * phba->params.cxns_per_ctrl,
GFP_KERNEL);
if (!phba->cid_array) {
shost_printk(KERN_ERR, phba->shost,
@@ -3055,7 +3032,7 @@
"hba_setup_cid_tbls\n");
return -ENOMEM;
}
- phba->ep_array = kmalloc(sizeof(struct iscsi_endpoint *) *
+ phba->ep_array = kzalloc(sizeof(struct iscsi_endpoint *) *
phba->params.cxns_per_ctrl * 2, GFP_KERNEL);
if (!phba->ep_array) {
shost_printk(KERN_ERR, phba->shost,
@@ -3064,7 +3041,7 @@
kfree(phba->cid_array);
return -ENOMEM;
}
- new_cid = phba->fw_config.iscsi_icd_start;
+ new_cid = phba->fw_config.iscsi_cid_start;
for (i = 0; i < phba->params.cxns_per_ctrl; i++) {
phba->cid_array[i] = new_cid;
new_cid += 2;
@@ -3145,8 +3122,6 @@
if (hba_setup_cid_tbls(phba)) {
shost_printk(KERN_ERR, phba->shost,
"Failed in hba_setup_cid_tbls\n");
- if (ring_mode)
- kfree(phba->sgl_hndl_array);
kfree(phba->io_sgl_hndl_base);
kfree(phba->eh_sgl_hndl_base);
goto do_cleanup_ctrlr;
@@ -3166,6 +3141,7 @@
struct be_queue_info *eq;
struct be_eq_entry *eqe = NULL;
int i, eq_msix;
+ unsigned int num_processed;
phwi_ctrlr = phba->phwi_ctrlr;
phwi_context = phwi_ctrlr->phwi_ctxt;
@@ -3177,13 +3153,17 @@
for (i = 0; i < (phba->num_cpus + eq_msix); i++) {
eq = &phwi_context->be_eq[i].q;
eqe = queue_tail_node(eq);
-
+ num_processed = 0;
while (eqe->dw[offsetof(struct amap_eq_entry, valid) / 32]
& EQE_VALID_MASK) {
AMAP_SET_BITS(struct amap_eq_entry, valid, eqe, 0);
queue_tail_inc(eq);
eqe = queue_tail_node(eq);
+ num_processed++;
}
+
+ if (num_processed)
+ hwi_ring_eq_db(phba, eq->id, 1, num_processed, 1, 1);
}
}
@@ -3195,10 +3175,9 @@
if (mgmt_status)
shost_printk(KERN_WARNING, phba->shost,
"mgmt_epfw_cleanup FAILED \n");
- hwi_cleanup(phba);
+
hwi_purge_eq(phba);
- if (ring_mode)
- kfree(phba->sgl_hndl_array);
+ hwi_cleanup(phba);
kfree(phba->io_sgl_hndl_base);
kfree(phba->eh_sgl_hndl_base);
kfree(phba->cid_array);
@@ -3219,7 +3198,8 @@
* We can always use 0 here because it is reserved by libiscsi for
* login/startup related tasks.
*/
- pwrb_handle = alloc_wrb_handle(phba, beiscsi_conn->beiscsi_conn_cid, 0);
+ pwrb_handle = alloc_wrb_handle(phba, (beiscsi_conn->beiscsi_conn_cid -
+ phba->fw_config.iscsi_cid_start));
pwrb = (struct iscsi_target_context_update_wrb *)pwrb_handle->pwrb;
memset(pwrb, 0, sizeof(*pwrb));
AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb,
@@ -3283,8 +3263,7 @@
be_dws_le_to_cpu(pwrb, sizeof(struct iscsi_target_context_update_wrb));
doorbell |= beiscsi_conn->beiscsi_conn_cid & DB_WRB_POST_CID_MASK;
- if (!ring_mode)
- doorbell |= (pwrb_handle->wrb_index & DB_DEF_PDU_WRB_INDEX_MASK)
+ doorbell |= (pwrb_handle->wrb_index & DB_DEF_PDU_WRB_INDEX_MASK)
<< DB_DEF_PDU_WRB_INDEX_SHIFT;
doorbell |= 1 << DB_DEF_PDU_NUM_POSTED_SHIFT;
@@ -3328,8 +3307,9 @@
io_task->bhs_pa.u.a64.address = paddr;
io_task->libiscsi_itt = (itt_t)task->itt;
io_task->pwrb_handle = alloc_wrb_handle(phba,
- beiscsi_conn->beiscsi_conn_cid,
- task->itt);
+ beiscsi_conn->beiscsi_conn_cid -
+ phba->fw_config.iscsi_cid_start
+ );
io_task->conn = beiscsi_conn;
task->hdr = (struct iscsi_hdr *)&io_task->cmd_bhs->iscsi_hdr;
@@ -3343,7 +3323,7 @@
goto free_hndls;
} else {
io_task->scsi_cmnd = NULL;
- if ((task->hdr->opcode & ISCSI_OPCODE_MASK) == ISCSI_OP_LOGIN) {
+ if ((opcode & ISCSI_OPCODE_MASK) == ISCSI_OP_LOGIN) {
if (!beiscsi_conn->login_in_progress) {
spin_lock(&phba->mgmt_sgl_lock);
io_task->psgl_handle = (struct sgl_handle *)
@@ -3370,21 +3350,16 @@
itt = (itt_t) cpu_to_be32(((unsigned int)io_task->pwrb_handle->
wrb_index << 16) | (unsigned int)
(io_task->psgl_handle->sgl_index));
- if (ring_mode) {
- phba->sgl_hndl_array[io_task->psgl_handle->sgl_index -
- phba->fw_config.iscsi_cid_start] =
- io_task->psgl_handle;
- io_task->psgl_handle->task = task;
- io_task->psgl_handle->cid = beiscsi_conn->beiscsi_conn_cid;
- } else
- io_task->pwrb_handle->pio_handle = task;
+ io_task->pwrb_handle->pio_handle = task;
io_task->cmd_bhs->iscsi_hdr.itt = itt;
return 0;
free_hndls:
phwi_ctrlr = phba->phwi_ctrlr;
- pwrb_context = &phwi_ctrlr->wrb_context[beiscsi_conn->beiscsi_conn_cid];
+ pwrb_context = &phwi_ctrlr->wrb_context[
+ beiscsi_conn->beiscsi_conn_cid -
+ phba->fw_config.iscsi_cid_start];
free_wrb_handle(phba, pwrb_context, io_task->pwrb_handle);
io_task->pwrb_handle = NULL;
pci_pool_free(beiscsi_sess->bhs_pool, io_task->cmd_bhs,
@@ -3404,7 +3379,8 @@
struct hwi_controller *phwi_ctrlr;
phwi_ctrlr = phba->phwi_ctrlr;
- pwrb_context = &phwi_ctrlr->wrb_context[beiscsi_conn->beiscsi_conn_cid];
+ pwrb_context = &phwi_ctrlr->wrb_context[beiscsi_conn->beiscsi_conn_cid
+ - phba->fw_config.iscsi_cid_start];
if (io_task->pwrb_handle) {
free_wrb_handle(phba, pwrb_context, io_task->pwrb_handle);
io_task->pwrb_handle = NULL;
@@ -3460,18 +3436,12 @@
ISCSI_OPCODE_SCSI_DATA_OUT);
AMAP_SET_BITS(struct amap_pdu_data_out, final_bit,
&io_task->cmd_bhs->iscsi_data_pdu, 1);
- if (ring_mode)
- io_task->psgl_handle->type = INI_WR_CMD;
- else
- AMAP_SET_BITS(struct amap_iscsi_wrb, type, pwrb,
- INI_WR_CMD);
+ AMAP_SET_BITS(struct amap_iscsi_wrb, type, pwrb,
+ INI_WR_CMD);
AMAP_SET_BITS(struct amap_iscsi_wrb, dsp, pwrb, 1);
} else {
- if (ring_mode)
- io_task->psgl_handle->type = INI_RD_CMD;
- else
- AMAP_SET_BITS(struct amap_iscsi_wrb, type, pwrb,
- INI_RD_CMD);
+ AMAP_SET_BITS(struct amap_iscsi_wrb, type, pwrb,
+ INI_RD_CMD);
AMAP_SET_BITS(struct amap_iscsi_wrb, dsp, pwrb, 0);
}
memcpy(&io_task->cmd_bhs->iscsi_data_pdu.
@@ -3496,8 +3466,7 @@
be_dws_le_to_cpu(pwrb, sizeof(struct iscsi_wrb));
doorbell |= beiscsi_conn->beiscsi_conn_cid & DB_WRB_POST_CID_MASK;
- if (!ring_mode)
- doorbell |= (io_task->pwrb_handle->wrb_index &
+ doorbell |= (io_task->pwrb_handle->wrb_index &
DB_DEF_PDU_WRB_INDEX_MASK) << DB_DEF_PDU_WRB_INDEX_SHIFT;
doorbell |= 1 << DB_DEF_PDU_NUM_POSTED_SHIFT;
@@ -3519,49 +3488,46 @@
unsigned int doorbell = 0;
unsigned int i, cid;
struct iscsi_task *aborted_task;
+ unsigned int tag;
cid = beiscsi_conn->beiscsi_conn_cid;
pwrb = io_task->pwrb_handle->pwrb;
+ memset(pwrb, 0, sizeof(*pwrb));
AMAP_SET_BITS(struct amap_iscsi_wrb, cmdsn_itt, pwrb,
be32_to_cpu(task->cmdsn));
AMAP_SET_BITS(struct amap_iscsi_wrb, wrb_idx, pwrb,
io_task->pwrb_handle->wrb_index);
AMAP_SET_BITS(struct amap_iscsi_wrb, sgl_icd_idx, pwrb,
io_task->psgl_handle->sgl_index);
-
switch (task->hdr->opcode & ISCSI_OPCODE_MASK) {
case ISCSI_OP_LOGIN:
- if (ring_mode)
- io_task->psgl_handle->type = TGT_DM_CMD;
- else
- AMAP_SET_BITS(struct amap_iscsi_wrb, type, pwrb,
- TGT_DM_CMD);
+ AMAP_SET_BITS(struct amap_iscsi_wrb, type, pwrb,
+ TGT_DM_CMD);
AMAP_SET_BITS(struct amap_iscsi_wrb, dmsg, pwrb, 0);
AMAP_SET_BITS(struct amap_iscsi_wrb, cmdsn_itt, pwrb, 1);
hwi_write_buffer(pwrb, task);
break;
case ISCSI_OP_NOOP_OUT:
- if (ring_mode)
- io_task->psgl_handle->type = INI_RD_CMD;
+ AMAP_SET_BITS(struct amap_iscsi_wrb, type, pwrb,
+ INI_RD_CMD);
+ if (task->hdr->ttt == ISCSI_RESERVED_TAG)
+ AMAP_SET_BITS(struct amap_iscsi_wrb, dmsg, pwrb, 0);
else
- AMAP_SET_BITS(struct amap_iscsi_wrb, type, pwrb,
- INI_RD_CMD);
+ AMAP_SET_BITS(struct amap_iscsi_wrb, dmsg, pwrb, 1);
hwi_write_buffer(pwrb, task);
break;
case ISCSI_OP_TEXT:
- if (ring_mode)
- io_task->psgl_handle->type = INI_WR_CMD;
- else
- AMAP_SET_BITS(struct amap_iscsi_wrb, type, pwrb,
- INI_WR_CMD);
- AMAP_SET_BITS(struct amap_iscsi_wrb, dsp, pwrb, 1);
+ AMAP_SET_BITS(struct amap_iscsi_wrb, type, pwrb,
+ TGT_DM_CMD);
+ AMAP_SET_BITS(struct amap_iscsi_wrb, dmsg, pwrb, 0);
hwi_write_buffer(pwrb, task);
break;
case ISCSI_OP_SCSI_TMFUNC:
session = conn->session;
i = ((struct iscsi_tm *)task->hdr)->rtt;
phwi_ctrlr = phba->phwi_ctrlr;
- pwrb_context = &phwi_ctrlr->wrb_context[cid];
+ pwrb_context = &phwi_ctrlr->wrb_context[cid -
+ phba->fw_config.iscsi_cid_start];
pwrb_handle = pwrb_context->pwrb_handle_basestd[be32_to_cpu(i)
>> 16];
aborted_task = pwrb_handle->pio_handle;
@@ -3572,22 +3538,25 @@
if (!aborted_io_task->scsi_cmnd)
return 0;
- mgmt_invalidate_icds(phba,
+ tag = mgmt_invalidate_icds(phba,
aborted_io_task->psgl_handle->sgl_index,
cid);
- if (ring_mode)
- io_task->psgl_handle->type = INI_TMF_CMD;
- else
- AMAP_SET_BITS(struct amap_iscsi_wrb, type, pwrb,
- INI_TMF_CMD);
+ if (!tag) {
+ shost_printk(KERN_WARNING, phba->shost,
+ "mgmt_invalidate_icds could not be"
+ " submitted\n");
+ } else {
+ wait_event_interruptible(phba->ctrl.mcc_wait[tag],
+ phba->ctrl.mcc_numtag[tag]);
+ free_mcc_tag(&phba->ctrl, tag);
+ }
+ AMAP_SET_BITS(struct amap_iscsi_wrb, type, pwrb,
+ INI_TMF_CMD);
AMAP_SET_BITS(struct amap_iscsi_wrb, dmsg, pwrb, 0);
hwi_write_buffer(pwrb, task);
break;
case ISCSI_OP_LOGOUT:
AMAP_SET_BITS(struct amap_iscsi_wrb, dmsg, pwrb, 0);
- if (ring_mode)
- io_task->psgl_handle->type = HWH_TYPE_LOGOUT;
- else
AMAP_SET_BITS(struct amap_iscsi_wrb, type, pwrb,
HWH_TYPE_LOGOUT);
hwi_write_buffer(pwrb, task);
@@ -3600,14 +3569,13 @@
}
AMAP_SET_BITS(struct amap_iscsi_wrb, r2t_exp_dtl, pwrb,
- be32_to_cpu(task->data_count));
+ task->data_count);
AMAP_SET_BITS(struct amap_iscsi_wrb, ptr2nextwrb, pwrb,
io_task->pwrb_handle->nxt_wrb_index);
be_dws_le_to_cpu(pwrb, sizeof(struct iscsi_wrb));
doorbell |= cid & DB_WRB_POST_CID_MASK;
- if (!ring_mode)
- doorbell |= (io_task->pwrb_handle->wrb_index &
+ doorbell |= (io_task->pwrb_handle->wrb_index &
DB_DEF_PDU_WRB_INDEX_MASK) << DB_DEF_PDU_WRB_INDEX_SHIFT;
doorbell |= 1 << DB_DEF_PDU_NUM_POSTED_SHIFT;
iowrite32(doorbell, phba->db_va + DB_TXULP0_OFFSET);
@@ -3649,7 +3617,6 @@
return beiscsi_iotask(task, sg, num_sg, xferlen, writedir);
}
-
static void beiscsi_remove(struct pci_dev *pcidev)
{
struct beiscsi_hba *phba = NULL;
@@ -3734,7 +3701,20 @@
}
SE_DEBUG(DBG_LVL_8, " phba = %p \n", phba);
- pci_set_drvdata(pcidev, phba);
+ switch (pcidev->device) {
+ case BE_DEVICE_ID1:
+ case OC_DEVICE_ID1:
+ case OC_DEVICE_ID2:
+ phba->generation = BE_GEN2;
+ break;
+ case BE_DEVICE_ID2:
+ case OC_DEVICE_ID3:
+ phba->generation = BE_GEN3;
+ break;
+ default:
+ phba->generation = 0;
+ }
+
if (enable_msix)
num_cpus = find_num_cpus();
else
@@ -3754,7 +3734,15 @@
spin_lock_init(&phba->io_sgl_lock);
spin_lock_init(&phba->mgmt_sgl_lock);
spin_lock_init(&phba->isr_lock);
+ ret = mgmt_get_fw_config(&phba->ctrl, phba);
+ if (ret != 0) {
+ shost_printk(KERN_ERR, phba->shost,
+ "Error getting fw config\n");
+ goto free_port;
+ }
+ phba->shost->max_id = phba->fw_config.iscsi_cid_count;
beiscsi_get_params(phba);
+ phba->shost->can_queue = phba->params.ios_per_ctrl;
ret = beiscsi_init_port(phba);
if (ret < 0) {
shost_printk(KERN_ERR, phba->shost, "beiscsi_dev_probe-"
@@ -3762,6 +3750,15 @@
goto free_port;
}
+ for (i = 0; i < MAX_MCC_CMD ; i++) {
+ init_waitqueue_head(&phba->ctrl.mcc_wait[i + 1]);
+ phba->ctrl.mcc_tag[i] = i + 1;
+ phba->ctrl.mcc_numtag[i + 1] = 0;
+ phba->ctrl.mcc_tag_available++;
+ }
+
+ phba->ctrl.mcc_alloc_index = phba->ctrl.mcc_free_index = 0;
+
snprintf(phba->wq_name, sizeof(phba->wq_name), "beiscsi_q_irq%u",
phba->shost->host_no);
phba->wq = create_workqueue(phba->wq_name);
@@ -3836,7 +3833,7 @@
struct iscsi_transport beiscsi_iscsi_transport = {
.owner = THIS_MODULE,
.name = DRV_NAME,
- .caps = CAP_RECOVERY_L0 | CAP_HDRDGST |
+ .caps = CAP_RECOVERY_L0 | CAP_HDRDGST | CAP_TEXT_NEGO |
CAP_MULTI_R2T | CAP_DATADGST | CAP_DATA_PATH_OFFLOAD,
.param_mask = ISCSI_MAX_RECV_DLENGTH |
ISCSI_MAX_XMIT_DLENGTH |
@@ -3859,7 +3856,7 @@
ISCSI_USERNAME | ISCSI_PASSWORD |
ISCSI_USERNAME_IN | ISCSI_PASSWORD_IN |
ISCSI_FAST_ABORT | ISCSI_ABORT_TMO |
- ISCSI_LU_RESET_TMO | ISCSI_TGT_RESET_TMO |
+ ISCSI_LU_RESET_TMO |
ISCSI_PING_TMO | ISCSI_RECV_TMO |
ISCSI_IFACE_NAME | ISCSI_INITIATOR_NAME,
.host_param_mask = ISCSI_HOST_HWADDRESS | ISCSI_HOST_IPADDRESS |
@@ -3905,7 +3902,7 @@
SE_DEBUG(DBG_LVL_1,
"beiscsi_module_init - Unable to register beiscsi"
"transport.\n");
- ret = -ENOMEM;
+ return -ENOMEM;
}
SE_DEBUG(DBG_LVL_8, "In beiscsi_module_init, tt=%p \n",
&beiscsi_iscsi_transport);
@@ -3917,7 +3914,6 @@
"beiscsi pci driver.\n");
goto unregister_iscsi_transport;
}
- ring_mode = 0;
return 0;
unregister_iscsi_transport:
diff --git a/drivers/scsi/be2iscsi/be_main.h b/drivers/scsi/be2iscsi/be_main.h
index 25e6b20..c53a80a 100644
--- a/drivers/scsi/be2iscsi/be_main.h
+++ b/drivers/scsi/be2iscsi/be_main.h
@@ -1,5 +1,5 @@
/**
- * Copyright (C) 2005 - 2009 ServerEngines
+ * Copyright (C) 2005 - 2010 ServerEngines
* All rights reserved.
*
* This program is free software; you can redistribute it and/or
@@ -40,31 +40,29 @@
#define DRV_DESC BE_NAME " " "Driver"
#define BE_VENDOR_ID 0x19A2
+/* DEVICE ID's for BE2 */
#define BE_DEVICE_ID1 0x212
#define OC_DEVICE_ID1 0x702
#define OC_DEVICE_ID2 0x703
-#define OC_DEVICE_ID3 0x712
-#define OC_DEVICE_ID4 0x222
-#define BE2_MAX_SESSIONS 64
+/* DEVICE ID's for BE3 */
+#define BE_DEVICE_ID2 0x222
+#define OC_DEVICE_ID3 0x712
+
+#define BE2_IO_DEPTH 1024
+#define BE2_MAX_SESSIONS 256
#define BE2_CMDS_PER_CXN 128
-#define BE2_LOGOUTS BE2_MAX_SESSIONS
#define BE2_TMFS 16
#define BE2_NOPOUT_REQ 16
-#define BE2_ASYNCPDUS BE2_MAX_SESSIONS
-#define BE2_MAX_ICDS 2048
#define BE2_SGE 32
#define BE2_DEFPDU_HDR_SZ 64
#define BE2_DEFPDU_DATA_SZ 8192
-#define BE2_IO_DEPTH \
- (BE2_MAX_ICDS / 2 - (BE2_LOGOUTS + BE2_TMFS + BE2_NOPOUT_REQ))
#define MAX_CPUS 31
-#define BEISCSI_SGLIST_ELEMENTS BE2_SGE
+#define BEISCSI_SGLIST_ELEMENTS 30
-#define BEISCSI_MAX_CMNDS 1024 /* Max IO's per Ctrlr sht->can_queue */
#define BEISCSI_CMD_PER_LUN 128 /* scsi_host->cmd_per_lun */
-#define BEISCSI_MAX_SECTORS 2048 /* scsi_host->max_sectors */
+#define BEISCSI_MAX_SECTORS 256 /* scsi_host->max_sectors */
#define BEISCSI_MAX_CMD_LEN 16 /* scsi_host->max_cmd_len */
#define BEISCSI_NUM_MAX_LUN 256 /* scsi_host->max_lun */
@@ -330,6 +328,7 @@
struct workqueue_struct *wq; /* The actuak work queue */
struct work_struct work_cqs; /* The work being queued */
struct be_ctrl_info ctrl;
+ unsigned int generation;
};
struct beiscsi_session {
@@ -656,11 +655,12 @@
} __packed;
-struct wrb_handle *alloc_wrb_handle(struct beiscsi_hba *phba, unsigned int cid,
- int index);
+struct wrb_handle *alloc_wrb_handle(struct beiscsi_hba *phba, unsigned int cid);
void
free_mgmt_sgl_handle(struct beiscsi_hba *phba, struct sgl_handle *psgl_handle);
+void beiscsi_process_all_cqs(struct work_struct *work);
+
struct pdu_nop_out {
u32 dw[12];
};
@@ -802,7 +802,6 @@
struct be_ring default_pdu_hdr;
struct be_ring default_pdu_data;
struct hwi_context_memory *phwi_ctxt;
- unsigned short cq_errors[CXN_KILLED_CMND_DATA_NOT_ON_SAME_CONN];
};
enum hwh_type_enum {
diff --git a/drivers/scsi/be2iscsi/be_mgmt.c b/drivers/scsi/be2iscsi/be_mgmt.c
index 79c2bd5..317bcd0 100644
--- a/drivers/scsi/be2iscsi/be_mgmt.c
+++ b/drivers/scsi/be2iscsi/be_mgmt.c
@@ -1,5 +1,5 @@
/**
- * Copyright (C) 2005 - 2009 ServerEngines
+ * Copyright (C) 2005 - 2010 ServerEngines
* All rights reserved.
*
* This program is free software; you can redistribute it and/or
@@ -48,6 +48,14 @@
pfw_cfg->ulp[0].sq_base;
phba->fw_config.iscsi_cid_count =
pfw_cfg->ulp[0].sq_count;
+ if (phba->fw_config.iscsi_cid_count > (BE2_MAX_SESSIONS / 2)) {
+ SE_DEBUG(DBG_LVL_8,
+ "FW reported MAX CXNS as %d \t"
+ "Max Supported = %d.\n",
+ phba->fw_config.iscsi_cid_count,
+ BE2_MAX_SESSIONS);
+ phba->fw_config.iscsi_cid_count = BE2_MAX_SESSIONS / 2;
+ }
} else {
shost_printk(KERN_WARNING, phba->shost,
"Failed in mgmt_get_fw_config \n");
@@ -77,6 +85,7 @@
}
nonemb_cmd.size = sizeof(struct be_mgmt_controller_attributes);
req = nonemb_cmd.va;
+ memset(req, 0, sizeof(*req));
spin_lock(&ctrl->mbox_lock);
memset(wrb, 0, sizeof(*wrb));
be_wrb_hdr_prepare(wrb, sizeof(*req), false, 1);
@@ -140,10 +149,17 @@
{
struct be_dma_mem nonemb_cmd;
struct be_ctrl_info *ctrl = &phba->ctrl;
- struct be_mcc_wrb *wrb = wrb_from_mccq(phba);
- struct be_sge *sge = nonembedded_sgl(wrb);
+ struct be_mcc_wrb *wrb;
+ struct be_sge *sge;
struct invalidate_commands_params_in *req;
- int status = 0;
+ unsigned int tag = 0;
+
+ spin_lock(&ctrl->mbox_lock);
+ tag = alloc_mcc_tag(phba);
+ if (!tag) {
+ spin_unlock(&ctrl->mbox_lock);
+ return tag;
+ }
nonemb_cmd.va = pci_alloc_consistent(ctrl->pdev,
sizeof(struct invalidate_commands_params_in),
@@ -156,8 +172,10 @@
}
nonemb_cmd.size = sizeof(struct invalidate_commands_params_in);
req = nonemb_cmd.va;
- spin_lock(&ctrl->mbox_lock);
- memset(wrb, 0, sizeof(*wrb));
+ memset(req, 0, sizeof(*req));
+ wrb = wrb_from_mccq(phba);
+ sge = nonembedded_sgl(wrb);
+ wrb->tag0 |= tag;
be_wrb_hdr_prepare(wrb, sizeof(*req), false, 1);
be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_ISCSI,
@@ -172,14 +190,12 @@
sge->pa_lo = cpu_to_le32(nonemb_cmd.dma & 0xFFFFFFFF);
sge->len = cpu_to_le32(nonemb_cmd.size);
- status = be_mcc_notify_wait(phba);
- if (status)
- SE_DEBUG(DBG_LVL_1, "ICDS Invalidation Failed\n");
+ be_mcc_notify(phba);
spin_unlock(&ctrl->mbox_lock);
if (nonemb_cmd.va)
pci_free_consistent(ctrl->pdev, nonemb_cmd.size,
nonemb_cmd.va, nonemb_cmd.dma);
- return status;
+ return tag;
}
unsigned char mgmt_invalidate_connection(struct beiscsi_hba *phba,
@@ -189,13 +205,19 @@
unsigned short savecfg_flag)
{
struct be_ctrl_info *ctrl = &phba->ctrl;
- struct be_mcc_wrb *wrb = wrb_from_mccq(phba);
- struct iscsi_invalidate_connection_params_in *req =
- embedded_payload(wrb);
- int status = 0;
+ struct be_mcc_wrb *wrb;
+ struct iscsi_invalidate_connection_params_in *req;
+ unsigned int tag = 0;
spin_lock(&ctrl->mbox_lock);
- memset(wrb, 0, sizeof(*wrb));
+ tag = alloc_mcc_tag(phba);
+ if (!tag) {
+ spin_unlock(&ctrl->mbox_lock);
+ return tag;
+ }
+ wrb = wrb_from_mccq(phba);
+ wrb->tag0 |= tag;
+ req = embedded_payload(wrb);
be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_ISCSI_INI,
@@ -208,35 +230,37 @@
else
req->cleanup_type = CMD_ISCSI_CONNECTION_INVALIDATE;
req->save_cfg = savecfg_flag;
- status = be_mcc_notify_wait(phba);
- if (status)
- SE_DEBUG(DBG_LVL_1, "Invalidation Failed\n");
-
+ be_mcc_notify(phba);
spin_unlock(&ctrl->mbox_lock);
- return status;
+ return tag;
}
unsigned char mgmt_upload_connection(struct beiscsi_hba *phba,
unsigned short cid, unsigned int upload_flag)
{
struct be_ctrl_info *ctrl = &phba->ctrl;
- struct be_mcc_wrb *wrb = wrb_from_mccq(phba);
- struct tcp_upload_params_in *req = embedded_payload(wrb);
- int status = 0;
+ struct be_mcc_wrb *wrb;
+ struct tcp_upload_params_in *req;
+ unsigned int tag = 0;
spin_lock(&ctrl->mbox_lock);
- memset(wrb, 0, sizeof(*wrb));
+ tag = alloc_mcc_tag(phba);
+ if (!tag) {
+ spin_unlock(&ctrl->mbox_lock);
+ return tag;
+ }
+ wrb = wrb_from_mccq(phba);
+ req = embedded_payload(wrb);
+ wrb->tag0 |= tag;
be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
be_cmd_hdr_prepare(&req->hdr, CMD_COMMON_TCP_UPLOAD,
OPCODE_COMMON_TCP_UPLOAD, sizeof(*req));
req->id = (unsigned short)cid;
req->upload_type = (unsigned char)upload_flag;
- status = be_mcc_notify_wait(phba);
- if (status)
- SE_DEBUG(DBG_LVL_1, "mgmt_upload_connection Failed\n");
+ be_mcc_notify(phba);
spin_unlock(&ctrl->mbox_lock);
- return status;
+ return tag;
}
int mgmt_open_connection(struct beiscsi_hba *phba,
@@ -248,13 +272,13 @@
struct sockaddr_in *daddr_in = (struct sockaddr_in *)dst_addr;
struct sockaddr_in6 *daddr_in6 = (struct sockaddr_in6 *)dst_addr;
struct be_ctrl_info *ctrl = &phba->ctrl;
- struct be_mcc_wrb *wrb = wrb_from_mccq(phba);
- struct tcp_connect_and_offload_in *req = embedded_payload(wrb);
+ struct be_mcc_wrb *wrb;
+ struct tcp_connect_and_offload_in *req;
unsigned short def_hdr_id;
unsigned short def_data_id;
struct phys_addr template_address = { 0, 0 };
struct phys_addr *ptemplate_address;
- int status = 0;
+ unsigned int tag = 0;
unsigned int i;
unsigned short cid = beiscsi_ep->ep_cid;
@@ -266,7 +290,14 @@
ptemplate_address = &template_address;
ISCSI_GET_PDU_TEMPLATE_ADDRESS(phba, ptemplate_address);
spin_lock(&ctrl->mbox_lock);
- memset(wrb, 0, sizeof(*wrb));
+ tag = alloc_mcc_tag(phba);
+ if (!tag) {
+ spin_unlock(&ctrl->mbox_lock);
+ return tag;
+ }
+ wrb = wrb_from_mccq(phba);
+ req = embedded_payload(wrb);
+ wrb->tag0 |= tag;
be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_ISCSI,
@@ -311,46 +342,36 @@
req->do_offload = 1;
req->dataout_template_pa.lo = ptemplate_address->lo;
req->dataout_template_pa.hi = ptemplate_address->hi;
- status = be_mcc_notify_wait(phba);
- if (!status) {
- struct iscsi_endpoint *ep;
- struct tcp_connect_and_offload_out *ptcpcnct_out =
- embedded_payload(wrb);
-
- ep = phba->ep_array[ptcpcnct_out->cid];
- beiscsi_ep = ep->dd_data;
- beiscsi_ep->fw_handle = ptcpcnct_out->connection_handle;
- beiscsi_ep->cid_vld = 1;
- SE_DEBUG(DBG_LVL_8, "mgmt_open_connection Success\n");
- } else
- SE_DEBUG(DBG_LVL_1, "mgmt_open_connection Failed\n");
+ be_mcc_notify(phba);
spin_unlock(&ctrl->mbox_lock);
- return status;
+ return tag;
}
-int be_cmd_get_mac_addr(struct beiscsi_hba *phba, u8 *mac_addr)
+unsigned int be_cmd_get_mac_addr(struct beiscsi_hba *phba)
{
struct be_ctrl_info *ctrl = &phba->ctrl;
- struct be_mcc_wrb *wrb = wrb_from_mccq(phba);
- struct be_cmd_req_get_mac_addr *req = embedded_payload(wrb);
- int status;
+ struct be_mcc_wrb *wrb;
+ struct be_cmd_req_get_mac_addr *req;
+ unsigned int tag = 0;
SE_DEBUG(DBG_LVL_8, "In be_cmd_get_mac_addr\n");
spin_lock(&ctrl->mbox_lock);
- memset(wrb, 0, sizeof(*wrb));
+ tag = alloc_mcc_tag(phba);
+ if (!tag) {
+ spin_unlock(&ctrl->mbox_lock);
+ return tag;
+ }
+
+ wrb = wrb_from_mccq(phba);
+ req = embedded_payload(wrb);
+ wrb->tag0 |= tag;
be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_ISCSI,
OPCODE_COMMON_ISCSI_NTWK_GET_NIC_CONFIG,
sizeof(*req));
- status = be_mcc_notify_wait(phba);
- if (!status) {
- struct be_cmd_resp_get_mac_addr *resp = embedded_payload(wrb);
-
- memcpy(mac_addr, resp->mac_address, ETH_ALEN);
- }
-
+ be_mcc_notify(phba);
spin_unlock(&ctrl->mbox_lock);
- return status;
+ return tag;
}
diff --git a/drivers/scsi/be2iscsi/be_mgmt.h b/drivers/scsi/be2iscsi/be_mgmt.h
index 24eaff9..ecead6a 100644
--- a/drivers/scsi/be2iscsi/be_mgmt.h
+++ b/drivers/scsi/be2iscsi/be_mgmt.h
@@ -1,5 +1,5 @@
/**
- * Copyright (C) 2005 - 2009 ServerEngines
+ * Copyright (C) 2005 - 2010 ServerEngines
* All rights reserved.
*
* This program is free software; you can redistribute it and/or
@@ -231,6 +231,7 @@
struct beiscsi_hba *phba;
struct beiscsi_sess *sess;
struct beiscsi_conn *conn;
+ struct iscsi_endpoint *openiscsi_ep;
unsigned short ip_type;
char dst6_addr[ISCSI_ADDRESS_BUF_LEN];
unsigned long dst_addr;
@@ -249,7 +250,4 @@
unsigned short issue_reset,
unsigned short savecfg_flag);
-unsigned char mgmt_fw_cmd(struct be_ctrl_info *ctrl,
- struct beiscsi_hba *phba,
- char *buf, unsigned int len);
#endif
diff --git a/drivers/scsi/bnx2i/bnx2i_iscsi.c b/drivers/scsi/bnx2i/bnx2i_iscsi.c
index 33b2294..1c4d121 100644
--- a/drivers/scsi/bnx2i/bnx2i_iscsi.c
+++ b/drivers/scsi/bnx2i/bnx2i_iscsi.c
@@ -1426,8 +1426,8 @@
break;
case ISCSI_PARAM_CONN_ADDRESS:
if (bnx2i_conn->ep)
- len = sprintf(buf, NIPQUAD_FMT "\n",
- NIPQUAD(bnx2i_conn->ep->cm_sk->dst_ip));
+ len = sprintf(buf, "%pI4\n",
+ &bnx2i_conn->ep->cm_sk->dst_ip);
break;
default:
return iscsi_conn_get_param(cls_conn, param, buf);
@@ -1990,6 +1990,7 @@
.eh_abort_handler = iscsi_eh_abort,
.eh_device_reset_handler = iscsi_eh_device_reset,
.eh_target_reset_handler = iscsi_eh_target_reset,
+ .change_queue_depth = iscsi_change_queue_depth,
.can_queue = 1024,
.max_sectors = 127,
.cmd_per_lun = 32,
diff --git a/drivers/scsi/constants.c b/drivers/scsi/constants.c
index 9129bcf..cd05e04 100644
--- a/drivers/scsi/constants.c
+++ b/drivers/scsi/constants.c
@@ -219,18 +219,15 @@
break;
}
sa = (cdbp[8] << 8) + cdbp[9];
- name = get_sa_name(maint_in_arr, MAINT_IN_SZ, sa);
- if (name) {
+ name = get_sa_name(variable_length_arr, VARIABLE_LENGTH_SZ, sa);
+ if (name)
printk("%s", name);
- if ((cdb_len > 0) && (len != cdb_len))
- printk(", in_cdb_len=%d, ext_len=%d",
- len, cdb_len);
- } else {
+ else
printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa);
- if ((cdb_len > 0) && (len != cdb_len))
- printk(", in_cdb_len=%d, ext_len=%d",
- len, cdb_len);
- }
+
+ if ((cdb_len > 0) && (len != cdb_len))
+ printk(", in_cdb_len=%d, ext_len=%d", len, cdb_len);
+
break;
case MAINTENANCE_IN:
sa = cdbp[1] & 0x1f;
@@ -349,6 +346,9 @@
{
int k;
+ if (cmd->cmnd == NULL)
+ return;
+
scmd_printk(KERN_INFO, cmd, "CDB: ");
print_opcode_name(cmd->cmnd, cmd->cmd_len);
diff --git a/drivers/scsi/cxgb3i/cxgb3i_iscsi.c b/drivers/scsi/cxgb3i/cxgb3i_iscsi.c
index 969c831..412853c 100644
--- a/drivers/scsi/cxgb3i/cxgb3i_iscsi.c
+++ b/drivers/scsi/cxgb3i/cxgb3i_iscsi.c
@@ -591,8 +591,7 @@
cxgb3i_conn_max_recv_dlength(conn);
spin_lock_bh(&conn->session->lock);
- sprintf(conn->portal_address, NIPQUAD_FMT,
- NIPQUAD(c3cn->daddr.sin_addr.s_addr));
+ sprintf(conn->portal_address, "%pI4", &c3cn->daddr.sin_addr.s_addr);
conn->portal_port = ntohs(c3cn->daddr.sin_port);
spin_unlock_bh(&conn->session->lock);
@@ -709,6 +708,12 @@
{
struct cxgb3i_hba *hba = iscsi_host_priv(shost);
+ if (!hba->ndev) {
+ shost_printk(KERN_ERR, shost, "Could not set host param. "
+ "Netdev for host not set.\n");
+ return -ENODEV;
+ }
+
cxgb3i_api_debug("param %d, buf %s.\n", param, buf);
switch (param) {
@@ -739,6 +744,12 @@
struct cxgb3i_hba *hba = iscsi_host_priv(shost);
int len = 0;
+ if (!hba->ndev) {
+ shost_printk(KERN_ERR, shost, "Could not set host param. "
+ "Netdev for host not set.\n");
+ return -ENODEV;
+ }
+
cxgb3i_api_debug("hba %s, param %d.\n", hba->ndev->name, param);
switch (param) {
@@ -753,7 +764,7 @@
__be32 addr;
addr = cxgb3i_get_private_ipv4addr(hba->ndev);
- len = sprintf(buf, NIPQUAD_FMT, NIPQUAD(addr));
+ len = sprintf(buf, "%pI4", &addr);
break;
}
default:
diff --git a/drivers/scsi/cxgb3i/cxgb3i_offload.c b/drivers/scsi/cxgb3i/cxgb3i_offload.c
index 15a00e8..3e08c43 100644
--- a/drivers/scsi/cxgb3i/cxgb3i_offload.c
+++ b/drivers/scsi/cxgb3i/cxgb3i_offload.c
@@ -1675,10 +1675,11 @@
} else
c3cn->saddr.sin_addr.s_addr = sipv4;
- c3cn_conn_debug("c3cn 0x%p, %u.%u.%u.%u,%u-%u.%u.%u.%u,%u SYN_SENT.\n",
- c3cn, NIPQUAD(c3cn->saddr.sin_addr.s_addr),
+ c3cn_conn_debug("c3cn 0x%p, %pI4,%u-%pI4,%u SYN_SENT.\n",
+ c3cn,
+ &c3cn->saddr.sin_addr.s_addr,
ntohs(c3cn->saddr.sin_port),
- NIPQUAD(c3cn->daddr.sin_addr.s_addr),
+ &c3cn->daddr.sin_addr.s_addr,
ntohs(c3cn->daddr.sin_port));
c3cn_set_state(c3cn, C3CN_STATE_CONNECTING);
diff --git a/drivers/scsi/cxgb3i/cxgb3i_pdu.c b/drivers/scsi/cxgb3i/cxgb3i_pdu.c
index 1fe3b0f..9c38539 100644
--- a/drivers/scsi/cxgb3i/cxgb3i_pdu.c
+++ b/drivers/scsi/cxgb3i/cxgb3i_pdu.c
@@ -461,10 +461,8 @@
skb = skb_peek(&c3cn->receive_queue);
}
read_unlock(&c3cn->callback_lock);
- if (c3cn) {
- c3cn->copied_seq += read;
- cxgb3i_c3cn_rx_credits(c3cn, read);
- }
+ c3cn->copied_seq += read;
+ cxgb3i_c3cn_rx_credits(c3cn, read);
conn->rxdata_octets += read;
if (err) {
diff --git a/drivers/scsi/device_handler/scsi_dh_alua.c b/drivers/scsi/device_handler/scsi_dh_alua.c
index 4f0d013..bc9e94f 100644
--- a/drivers/scsi/device_handler/scsi_dh_alua.c
+++ b/drivers/scsi/device_handler/scsi_dh_alua.c
@@ -717,6 +717,8 @@
{"IBM", "2145" },
{"Pillar", "Axiom" },
{"Intel", "Multi-Flex"},
+ {"NETAPP", "LUN"},
+ {"AIX", "NVDISK"},
{NULL, NULL}
};
diff --git a/drivers/scsi/eata.c b/drivers/scsi/eata.c
index c7076ce..3c5abf7 100644
--- a/drivers/scsi/eata.c
+++ b/drivers/scsi/eata.c
@@ -1509,7 +1509,7 @@
char *cur = str;
int i = 1;
- while (cur && isdigit(*cur) && i <= MAX_INT_PARAM) {
+ while (cur && isdigit(*cur) && i < MAX_INT_PARAM) {
ints[i++] = simple_strtoul(cur, NULL, 0);
if ((cur = strchr(cur, ',')) != NULL)
diff --git a/drivers/scsi/esp_scsi.c b/drivers/scsi/esp_scsi.c
index a680e18..e2bc779 100644
--- a/drivers/scsi/esp_scsi.c
+++ b/drivers/scsi/esp_scsi.c
@@ -1449,9 +1449,6 @@
if (offset > 15)
goto do_reject;
- if (esp->flags & ESP_FLAG_DISABLE_SYNC)
- offset = 0;
-
if (offset) {
int one_clock;
@@ -2405,12 +2402,6 @@
struct esp_target_data *tp = &esp->target[dev->id];
int goal_tags, queue_depth;
- if (esp->flags & ESP_FLAG_DISABLE_SYNC) {
- /* Bypass async domain validation */
- dev->ppr = 0;
- dev->sdtr = 0;
- }
-
goal_tags = 0;
if (dev->tagged_supported) {
@@ -2660,7 +2651,10 @@
struct esp *esp = shost_priv(host);
struct esp_target_data *tp = &esp->target[target->id];
- tp->nego_goal_offset = offset;
+ if (esp->flags & ESP_FLAG_DISABLE_SYNC)
+ tp->nego_goal_offset = 0;
+ else
+ tp->nego_goal_offset = offset;
tp->flags |= ESP_TGT_CHECK_NEGO;
}
diff --git a/drivers/scsi/fnic/fnic.h b/drivers/scsi/fnic/fnic.h
index bb208a6..3966c71 100644
--- a/drivers/scsi/fnic/fnic.h
+++ b/drivers/scsi/fnic/fnic.h
@@ -36,7 +36,7 @@
#define DRV_NAME "fnic"
#define DRV_DESCRIPTION "Cisco FCoE HBA Driver"
-#define DRV_VERSION "1.0.0.1121"
+#define DRV_VERSION "1.4.0.98"
#define PFX DRV_NAME ": "
#define DFX DRV_NAME "%d: "
diff --git a/drivers/scsi/fnic/fnic_main.c b/drivers/scsi/fnic/fnic_main.c
index fe1b1031..507e26c 100644
--- a/drivers/scsi/fnic/fnic_main.c
+++ b/drivers/scsi/fnic/fnic_main.c
@@ -620,6 +620,8 @@
if (fnic->config.flags & VFCF_FIP_CAPABLE) {
shost_printk(KERN_INFO, fnic->lport->host,
"firmware supports FIP\n");
+ /* enable directed and multicast */
+ vnic_dev_packet_filter(fnic->vdev, 1, 1, 0, 0, 0);
vnic_dev_add_addr(fnic->vdev, FIP_ALL_ENODE_MACS);
vnic_dev_add_addr(fnic->vdev, fnic->ctlr.ctl_src_addr);
} else {
@@ -698,6 +700,8 @@
goto err_out_remove_scsi_host;
}
+ fc_lport_init_stats(lp);
+
fc_lport_config(lp);
if (fc_set_mfs(lp, fnic->config.maxdatafieldsize +
diff --git a/drivers/scsi/fnic/vnic_devcmd.h b/drivers/scsi/fnic/vnic_devcmd.h
index d62b906..7c9ccbd 100644
--- a/drivers/scsi/fnic/vnic_devcmd.h
+++ b/drivers/scsi/fnic/vnic_devcmd.h
@@ -94,7 +94,7 @@
CMD_STATS_DUMP = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 4),
/* set Rx packet filter: (u32)a0=filters (see CMD_PFILTER_*) */
- CMD_PACKET_FILTER = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 7),
+ CMD_PACKET_FILTER = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 7),
/* hang detection notification */
CMD_HANG_NOTIFY = _CMDC(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 8),
diff --git a/drivers/scsi/gdth.c b/drivers/scsi/gdth.c
index 9e8fce0..ba3c94c 100644
--- a/drivers/scsi/gdth.c
+++ b/drivers/scsi/gdth.c
@@ -140,40 +140,40 @@
#include "gdth.h"
static void gdth_delay(int milliseconds);
-static void gdth_eval_mapping(ulong32 size, ulong32 *cyls, int *heads, int *secs);
+static void gdth_eval_mapping(u32 size, u32 *cyls, int *heads, int *secs);
static irqreturn_t gdth_interrupt(int irq, void *dev_id);
static irqreturn_t __gdth_interrupt(gdth_ha_str *ha,
int gdth_from_wait, int* pIndex);
-static int gdth_sync_event(gdth_ha_str *ha, int service, unchar index,
+static int gdth_sync_event(gdth_ha_str *ha, int service, u8 index,
Scsi_Cmnd *scp);
static int gdth_async_event(gdth_ha_str *ha);
static void gdth_log_event(gdth_evt_data *dvr, char *buffer);
-static void gdth_putq(gdth_ha_str *ha, Scsi_Cmnd *scp, unchar priority);
+static void gdth_putq(gdth_ha_str *ha, Scsi_Cmnd *scp, u8 priority);
static void gdth_next(gdth_ha_str *ha);
-static int gdth_fill_raw_cmd(gdth_ha_str *ha, Scsi_Cmnd *scp, unchar b);
+static int gdth_fill_raw_cmd(gdth_ha_str *ha, Scsi_Cmnd *scp, u8 b);
static int gdth_special_cmd(gdth_ha_str *ha, Scsi_Cmnd *scp);
-static gdth_evt_str *gdth_store_event(gdth_ha_str *ha, ushort source,
- ushort idx, gdth_evt_data *evt);
+static gdth_evt_str *gdth_store_event(gdth_ha_str *ha, u16 source,
+ u16 idx, gdth_evt_data *evt);
static int gdth_read_event(gdth_ha_str *ha, int handle, gdth_evt_str *estr);
-static void gdth_readapp_event(gdth_ha_str *ha, unchar application,
+static void gdth_readapp_event(gdth_ha_str *ha, u8 application,
gdth_evt_str *estr);
static void gdth_clear_events(void);
static void gdth_copy_internal_data(gdth_ha_str *ha, Scsi_Cmnd *scp,
- char *buffer, ushort count);
+ char *buffer, u16 count);
static int gdth_internal_cache_cmd(gdth_ha_str *ha, Scsi_Cmnd *scp);
-static int gdth_fill_cache_cmd(gdth_ha_str *ha, Scsi_Cmnd *scp, ushort hdrive);
+static int gdth_fill_cache_cmd(gdth_ha_str *ha, Scsi_Cmnd *scp, u16 hdrive);
static void gdth_enable_int(gdth_ha_str *ha);
static int gdth_test_busy(gdth_ha_str *ha);
static int gdth_get_cmd_index(gdth_ha_str *ha);
static void gdth_release_event(gdth_ha_str *ha);
-static int gdth_wait(gdth_ha_str *ha, int index,ulong32 time);
-static int gdth_internal_cmd(gdth_ha_str *ha, unchar service, ushort opcode,
- ulong32 p1, ulong64 p2,ulong64 p3);
+static int gdth_wait(gdth_ha_str *ha, int index,u32 time);
+static int gdth_internal_cmd(gdth_ha_str *ha, u8 service, u16 opcode,
+ u32 p1, u64 p2,u64 p3);
static int gdth_search_drives(gdth_ha_str *ha);
-static int gdth_analyse_hdrive(gdth_ha_str *ha, ushort hdrive);
+static int gdth_analyse_hdrive(gdth_ha_str *ha, u16 hdrive);
static const char *gdth_ctr_name(gdth_ha_str *ha);
@@ -189,7 +189,7 @@
static void gdth_scsi_done(struct scsi_cmnd *scp);
#ifdef DEBUG_GDTH
-static unchar DebugState = DEBUG_GDTH;
+static u8 DebugState = DEBUG_GDTH;
#ifdef __SERIAL__
#define MAX_SERBUF 160
@@ -270,30 +270,30 @@
#endif
#ifdef GDTH_STATISTICS
-static ulong32 max_rq=0, max_index=0, max_sg=0;
+static u32 max_rq=0, max_index=0, max_sg=0;
#ifdef INT_COAL
-static ulong32 max_int_coal=0;
+static u32 max_int_coal=0;
#endif
-static ulong32 act_ints=0, act_ios=0, act_stats=0, act_rq=0;
+static u32 act_ints=0, act_ios=0, act_stats=0, act_rq=0;
static struct timer_list gdth_timer;
#endif
-#define PTR2USHORT(a) (ushort)(ulong)(a)
+#define PTR2USHORT(a) (u16)(unsigned long)(a)
#define GDTOFFSOF(a,b) (size_t)&(((a*)0)->b)
#define INDEX_OK(i,t) ((i)<ARRAY_SIZE(t))
#define BUS_L2P(a,b) ((b)>(a)->virt_bus ? (b-1):(b))
#ifdef CONFIG_ISA
-static unchar gdth_drq_tab[4] = {5,6,7,7}; /* DRQ table */
+static u8 gdth_drq_tab[4] = {5,6,7,7}; /* DRQ table */
#endif
#if defined(CONFIG_EISA) || defined(CONFIG_ISA)
-static unchar gdth_irq_tab[6] = {0,10,11,12,14,0}; /* IRQ table */
+static u8 gdth_irq_tab[6] = {0,10,11,12,14,0}; /* IRQ table */
#endif
-static unchar gdth_polling; /* polling if TRUE */
+static u8 gdth_polling; /* polling if TRUE */
static int gdth_ctr_count = 0; /* controller count */
static LIST_HEAD(gdth_instances); /* controller list */
-static unchar gdth_write_through = FALSE; /* write through */
+static u8 gdth_write_through = FALSE; /* write through */
static gdth_evt_str ebuffer[MAX_EVENTS]; /* event buffer */
static int elastidx;
static int eoldidx;
@@ -303,7 +303,7 @@
#define DOU 2 /* OUT data direction */
#define DNO DIN /* no data transfer */
#define DUN DIN /* unknown data direction */
-static unchar gdth_direction_tab[0x100] = {
+static u8 gdth_direction_tab[0x100] = {
DNO,DNO,DIN,DIN,DOU,DIN,DIN,DOU,DIN,DUN,DOU,DOU,DUN,DUN,DUN,DIN,
DNO,DIN,DIN,DOU,DIN,DOU,DNO,DNO,DOU,DNO,DIN,DNO,DIN,DOU,DNO,DUN,
DIN,DUN,DIN,DUN,DOU,DIN,DUN,DUN,DIN,DIN,DOU,DNO,DUN,DIN,DOU,DOU,
@@ -390,7 +390,7 @@
static struct gdth_cmndinfo *gdth_get_cmndinfo(gdth_ha_str *ha)
{
struct gdth_cmndinfo *priv = NULL;
- ulong flags;
+ unsigned long flags;
int i;
spin_lock_irqsave(&ha->smp_lock, flags);
@@ -493,7 +493,7 @@
return rval;
}
-static void gdth_eval_mapping(ulong32 size, ulong32 *cyls, int *heads, int *secs)
+static void gdth_eval_mapping(u32 size, u32 *cyls, int *heads, int *secs)
{
*cyls = size /HEADS/SECS;
if (*cyls <= MAXCYLS) {
@@ -514,9 +514,9 @@
/* controller search and initialization functions */
#ifdef CONFIG_EISA
-static int __init gdth_search_eisa(ushort eisa_adr)
+static int __init gdth_search_eisa(u16 eisa_adr)
{
- ulong32 id;
+ u32 id;
TRACE(("gdth_search_eisa() adr. %x\n",eisa_adr));
id = inl(eisa_adr+ID0REG);
@@ -533,13 +533,13 @@
#endif /* CONFIG_EISA */
#ifdef CONFIG_ISA
-static int __init gdth_search_isa(ulong32 bios_adr)
+static int __init gdth_search_isa(u32 bios_adr)
{
void __iomem *addr;
- ulong32 id;
+ u32 id;
TRACE(("gdth_search_isa() bios adr. %x\n",bios_adr));
- if ((addr = ioremap(bios_adr+BIOS_ID_OFFS, sizeof(ulong32))) != NULL) {
+ if ((addr = ioremap(bios_adr+BIOS_ID_OFFS, sizeof(u32))) != NULL) {
id = readl(addr);
iounmap(addr);
if (id == GDT2_ID) /* GDT2000 */
@@ -551,7 +551,7 @@
#ifdef CONFIG_PCI
-static bool gdth_search_vortex(ushort device)
+static bool gdth_search_vortex(u16 device)
{
if (device <= PCI_DEVICE_ID_VORTEX_GDT6555)
return true;
@@ -603,9 +603,9 @@
static int __devinit gdth_pci_init_one(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
- ushort vendor = pdev->vendor;
- ushort device = pdev->device;
- ulong base0, base1, base2;
+ u16 vendor = pdev->vendor;
+ u16 device = pdev->device;
+ unsigned long base0, base1, base2;
int rc;
gdth_pci_str gdth_pcistr;
gdth_ha_str *ha = NULL;
@@ -658,10 +658,10 @@
#endif /* CONFIG_PCI */
#ifdef CONFIG_EISA
-static int __init gdth_init_eisa(ushort eisa_adr,gdth_ha_str *ha)
+static int __init gdth_init_eisa(u16 eisa_adr,gdth_ha_str *ha)
{
- ulong32 retries,id;
- unchar prot_ver,eisacf,i,irq_found;
+ u32 retries,id;
+ u8 prot_ver,eisacf,i,irq_found;
TRACE(("gdth_init_eisa() adr. %x\n",eisa_adr));
@@ -688,7 +688,7 @@
return 0;
}
ha->bmic = eisa_adr;
- ha->brd_phys = (ulong32)eisa_adr >> 12;
+ ha->brd_phys = (u32)eisa_adr >> 12;
outl(0,eisa_adr+MAILBOXREG);
outl(0,eisa_adr+MAILBOXREG+4);
@@ -752,12 +752,12 @@
#endif /* CONFIG_EISA */
#ifdef CONFIG_ISA
-static int __init gdth_init_isa(ulong32 bios_adr,gdth_ha_str *ha)
+static int __init gdth_init_isa(u32 bios_adr,gdth_ha_str *ha)
{
register gdt2_dpram_str __iomem *dp2_ptr;
int i;
- unchar irq_drq,prot_ver;
- ulong32 retries;
+ u8 irq_drq,prot_ver;
+ u32 retries;
TRACE(("gdth_init_isa() bios adr. %x\n",bios_adr));
@@ -812,7 +812,7 @@
}
gdth_delay(1);
}
- prot_ver = (unchar)readl(&dp2_ptr->u.ic.S_Info[0]);
+ prot_ver = (u8)readl(&dp2_ptr->u.ic.S_Info[0]);
writeb(0, &dp2_ptr->u.ic.Status);
writeb(0xff, &dp2_ptr->io.irqdel);
if (prot_ver != PROTOCOL_VERSION) {
@@ -859,9 +859,9 @@
register gdt6_dpram_str __iomem *dp6_ptr;
register gdt6c_dpram_str __iomem *dp6c_ptr;
register gdt6m_dpram_str __iomem *dp6m_ptr;
- ulong32 retries;
- unchar prot_ver;
- ushort command;
+ u32 retries;
+ u8 prot_ver;
+ u16 command;
int i, found = FALSE;
TRACE(("gdth_init_pci()\n"));
@@ -871,7 +871,7 @@
else
ha->oem_id = OEM_ID_ICP;
ha->brd_phys = (pdev->bus->number << 8) | (pdev->devfn & 0xf8);
- ha->stype = (ulong32)pdev->device;
+ ha->stype = (u32)pdev->device;
ha->irq = pdev->irq;
ha->pdev = pdev;
@@ -891,7 +891,7 @@
found = FALSE;
for (i = 0xC8000; i < 0xE8000; i += 0x4000) {
iounmap(ha->brd);
- ha->brd = ioremap(i, sizeof(ushort));
+ ha->brd = ioremap(i, sizeof(u16));
if (ha->brd == NULL) {
printk("GDT-PCI: Initialization error (DPMEM remap error)\n");
return 0;
@@ -947,7 +947,7 @@
}
gdth_delay(1);
}
- prot_ver = (unchar)readl(&dp6_ptr->u.ic.S_Info[0]);
+ prot_ver = (u8)readl(&dp6_ptr->u.ic.S_Info[0]);
writeb(0, &dp6_ptr->u.ic.S_Status);
writeb(0xff, &dp6_ptr->io.irqdel);
if (prot_ver != PROTOCOL_VERSION) {
@@ -1000,7 +1000,7 @@
found = FALSE;
for (i = 0xC8000; i < 0xE8000; i += 0x4000) {
iounmap(ha->brd);
- ha->brd = ioremap(i, sizeof(ushort));
+ ha->brd = ioremap(i, sizeof(u16));
if (ha->brd == NULL) {
printk("GDT-PCI: Initialization error (DPMEM remap error)\n");
return 0;
@@ -1059,7 +1059,7 @@
}
gdth_delay(1);
}
- prot_ver = (unchar)readl(&dp6c_ptr->u.ic.S_Info[0]);
+ prot_ver = (u8)readl(&dp6c_ptr->u.ic.S_Info[0]);
writeb(0, &dp6c_ptr->u.ic.Status);
if (prot_ver != PROTOCOL_VERSION) {
printk("GDT-PCI: Illegal protocol version\n");
@@ -1128,7 +1128,7 @@
found = FALSE;
for (i = 0xC8000; i < 0xE8000; i += 0x4000) {
iounmap(ha->brd);
- ha->brd = ioremap(i, sizeof(ushort));
+ ha->brd = ioremap(i, sizeof(u16));
if (ha->brd == NULL) {
printk("GDT-PCI: Initialization error (DPMEM remap error)\n");
return 0;
@@ -1180,7 +1180,7 @@
}
gdth_delay(1);
}
- prot_ver = (unchar)readl(&dp6m_ptr->u.ic.S_Info[0]);
+ prot_ver = (u8)readl(&dp6m_ptr->u.ic.S_Info[0]);
writeb(0, &dp6m_ptr->u.ic.S_Status);
if (prot_ver != PROTOCOL_VERSION) {
printk("GDT-PCI: Illegal protocol version\n");
@@ -1223,7 +1223,7 @@
}
gdth_delay(1);
}
- prot_ver = (unchar)(readl(&dp6m_ptr->u.ic.S_Info[0]) >> 16);
+ prot_ver = (u8)(readl(&dp6m_ptr->u.ic.S_Info[0]) >> 16);
writeb(0, &dp6m_ptr->u.ic.S_Status);
if (prot_ver < 0x2b) /* FW < x.43: no 64-bit DMA support */
ha->dma64_support = 0;
@@ -1239,7 +1239,7 @@
static void __devinit gdth_enable_int(gdth_ha_str *ha)
{
- ulong flags;
+ unsigned long flags;
gdt2_dpram_str __iomem *dp2_ptr;
gdt6_dpram_str __iomem *dp6_ptr;
gdt6m_dpram_str __iomem *dp6m_ptr;
@@ -1274,14 +1274,14 @@
}
/* return IStatus if interrupt was from this card else 0 */
-static unchar gdth_get_status(gdth_ha_str *ha)
+static u8 gdth_get_status(gdth_ha_str *ha)
{
- unchar IStatus = 0;
+ u8 IStatus = 0;
TRACE(("gdth_get_status() irq %d ctr_count %d\n", ha->irq, gdth_ctr_count));
if (ha->type == GDT_EISA)
- IStatus = inb((ushort)ha->bmic + EDOORREG);
+ IStatus = inb((u16)ha->bmic + EDOORREG);
else if (ha->type == GDT_ISA)
IStatus =
readb(&((gdt2_dpram_str __iomem *)ha->brd)->u.ic.Cmd_Index);
@@ -1329,7 +1329,7 @@
if (ha->cmd_tab[i].cmnd == UNUSED_CMND) {
ha->cmd_tab[i].cmnd = ha->pccb->RequestBuffer;
ha->cmd_tab[i].service = ha->pccb->Service;
- ha->pccb->CommandIndex = (ulong32)i+2;
+ ha->pccb->CommandIndex = (u32)i+2;
return (i+2);
}
}
@@ -1362,7 +1362,7 @@
register gdt6c_dpram_str __iomem *dp6c_ptr;
gdt6_dpram_str __iomem *dp6_ptr;
gdt2_dpram_str __iomem *dp2_ptr;
- ushort cp_count,dp_offset,cmd_no;
+ u16 cp_count,dp_offset,cmd_no;
TRACE(("gdth_copy_command() hanum %d\n", ha->hanum));
@@ -1386,28 +1386,28 @@
dp2_ptr = ha->brd;
writew(dp_offset + DPMEM_COMMAND_OFFSET,
&dp2_ptr->u.ic.comm_queue[cmd_no].offset);
- writew((ushort)cmd_ptr->Service,
+ writew((u16)cmd_ptr->Service,
&dp2_ptr->u.ic.comm_queue[cmd_no].serv_id);
memcpy_toio(&dp2_ptr->u.ic.gdt_dpr_cmd[dp_offset],cmd_ptr,cp_count);
} else if (ha->type == GDT_PCI) {
dp6_ptr = ha->brd;
writew(dp_offset + DPMEM_COMMAND_OFFSET,
&dp6_ptr->u.ic.comm_queue[cmd_no].offset);
- writew((ushort)cmd_ptr->Service,
+ writew((u16)cmd_ptr->Service,
&dp6_ptr->u.ic.comm_queue[cmd_no].serv_id);
memcpy_toio(&dp6_ptr->u.ic.gdt_dpr_cmd[dp_offset],cmd_ptr,cp_count);
} else if (ha->type == GDT_PCINEW) {
dp6c_ptr = ha->brd;
writew(dp_offset + DPMEM_COMMAND_OFFSET,
&dp6c_ptr->u.ic.comm_queue[cmd_no].offset);
- writew((ushort)cmd_ptr->Service,
+ writew((u16)cmd_ptr->Service,
&dp6c_ptr->u.ic.comm_queue[cmd_no].serv_id);
memcpy_toio(&dp6c_ptr->u.ic.gdt_dpr_cmd[dp_offset],cmd_ptr,cp_count);
} else if (ha->type == GDT_PCIMPR) {
dp6m_ptr = ha->brd;
writew(dp_offset + DPMEM_COMMAND_OFFSET,
&dp6m_ptr->u.ic.comm_queue[cmd_no].offset);
- writew((ushort)cmd_ptr->Service,
+ writew((u16)cmd_ptr->Service,
&dp6m_ptr->u.ic.comm_queue[cmd_no].serv_id);
memcpy_toio(&dp6m_ptr->u.ic.gdt_dpr_cmd[dp_offset],cmd_ptr,cp_count);
}
@@ -1420,14 +1420,14 @@
#ifdef GDTH_STATISTICS
{
- ulong32 i,j;
+ u32 i,j;
for (i=0,j=0; j<GDTH_MAXCMDS; ++j) {
if (ha->cmd_tab[j].cmnd != UNUSED_CMND)
++i;
}
if (max_index < i) {
max_index = i;
- TRACE3(("GDT: max_index = %d\n",(ushort)i));
+ TRACE3(("GDT: max_index = %d\n",(u16)i));
}
}
#endif
@@ -1450,7 +1450,7 @@
}
}
-static int gdth_wait(gdth_ha_str *ha, int index, ulong32 time)
+static int gdth_wait(gdth_ha_str *ha, int index, u32 time)
{
int answer_found = FALSE;
int wait_index = 0;
@@ -1476,8 +1476,8 @@
}
-static int gdth_internal_cmd(gdth_ha_str *ha, unchar service, ushort opcode,
- ulong32 p1, ulong64 p2, ulong64 p3)
+static int gdth_internal_cmd(gdth_ha_str *ha, u8 service, u16 opcode,
+ u32 p1, u64 p2, u64 p3)
{
register gdth_cmd_str *cmd_ptr;
int retries,index;
@@ -1501,35 +1501,35 @@
if (service == CACHESERVICE) {
if (opcode == GDT_IOCTL) {
cmd_ptr->u.ioctl.subfunc = p1;
- cmd_ptr->u.ioctl.channel = (ulong32)p2;
- cmd_ptr->u.ioctl.param_size = (ushort)p3;
+ cmd_ptr->u.ioctl.channel = (u32)p2;
+ cmd_ptr->u.ioctl.param_size = (u16)p3;
cmd_ptr->u.ioctl.p_param = ha->scratch_phys;
} else {
if (ha->cache_feat & GDT_64BIT) {
- cmd_ptr->u.cache64.DeviceNo = (ushort)p1;
+ cmd_ptr->u.cache64.DeviceNo = (u16)p1;
cmd_ptr->u.cache64.BlockNo = p2;
} else {
- cmd_ptr->u.cache.DeviceNo = (ushort)p1;
- cmd_ptr->u.cache.BlockNo = (ulong32)p2;
+ cmd_ptr->u.cache.DeviceNo = (u16)p1;
+ cmd_ptr->u.cache.BlockNo = (u32)p2;
}
}
} else if (service == SCSIRAWSERVICE) {
if (ha->raw_feat & GDT_64BIT) {
cmd_ptr->u.raw64.direction = p1;
- cmd_ptr->u.raw64.bus = (unchar)p2;
- cmd_ptr->u.raw64.target = (unchar)p3;
- cmd_ptr->u.raw64.lun = (unchar)(p3 >> 8);
+ cmd_ptr->u.raw64.bus = (u8)p2;
+ cmd_ptr->u.raw64.target = (u8)p3;
+ cmd_ptr->u.raw64.lun = (u8)(p3 >> 8);
} else {
cmd_ptr->u.raw.direction = p1;
- cmd_ptr->u.raw.bus = (unchar)p2;
- cmd_ptr->u.raw.target = (unchar)p3;
- cmd_ptr->u.raw.lun = (unchar)(p3 >> 8);
+ cmd_ptr->u.raw.bus = (u8)p2;
+ cmd_ptr->u.raw.target = (u8)p3;
+ cmd_ptr->u.raw.lun = (u8)(p3 >> 8);
}
} else if (service == SCREENSERVICE) {
if (opcode == GDT_REALTIME) {
- *(ulong32 *)&cmd_ptr->u.screen.su.data[0] = p1;
- *(ulong32 *)&cmd_ptr->u.screen.su.data[4] = (ulong32)p2;
- *(ulong32 *)&cmd_ptr->u.screen.su.data[8] = (ulong32)p3;
+ *(u32 *)&cmd_ptr->u.screen.su.data[0] = p1;
+ *(u32 *)&cmd_ptr->u.screen.su.data[4] = (u32)p2;
+ *(u32 *)&cmd_ptr->u.screen.su.data[8] = (u32)p3;
}
}
ha->cmd_len = sizeof(gdth_cmd_str);
@@ -1555,9 +1555,9 @@
static int __devinit gdth_search_drives(gdth_ha_str *ha)
{
- ushort cdev_cnt, i;
+ u16 cdev_cnt, i;
int ok;
- ulong32 bus_no, drv_cnt, drv_no, j;
+ u32 bus_no, drv_cnt, drv_no, j;
gdth_getch_str *chn;
gdth_drlist_str *drl;
gdth_iochan_str *ioc;
@@ -1570,8 +1570,8 @@
#endif
#ifdef GDTH_RTC
- unchar rtc[12];
- ulong flags;
+ u8 rtc[12];
+ unsigned long flags;
#endif
TRACE(("gdth_search_drives() hanum %d\n", ha->hanum));
@@ -1584,7 +1584,7 @@
if (ok)
ha->screen_feat = GDT_64BIT;
}
- if (force_dma32 || (!ok && ha->status == (ushort)S_NOFUNC))
+ if (force_dma32 || (!ok && ha->status == (u16)S_NOFUNC))
ok = gdth_internal_cmd(ha, SCREENSERVICE, GDT_INIT, 0, 0, 0);
if (!ok) {
printk("GDT-HA %d: Initialization error screen service (code %d)\n",
@@ -1609,11 +1609,11 @@
rtc[j] = CMOS_READ(j);
} while (rtc[0] != CMOS_READ(0));
spin_unlock_irqrestore(&rtc_lock, flags);
- TRACE2(("gdth_search_drives(): RTC: %x/%x/%x\n",*(ulong32 *)&rtc[0],
- *(ulong32 *)&rtc[4], *(ulong32 *)&rtc[8]));
+ TRACE2(("gdth_search_drives(): RTC: %x/%x/%x\n",*(u32 *)&rtc[0],
+ *(u32 *)&rtc[4], *(u32 *)&rtc[8]));
/* 3. send to controller firmware */
- gdth_internal_cmd(ha, SCREENSERVICE, GDT_REALTIME, *(ulong32 *)&rtc[0],
- *(ulong32 *)&rtc[4], *(ulong32 *)&rtc[8]);
+ gdth_internal_cmd(ha, SCREENSERVICE, GDT_REALTIME, *(u32 *)&rtc[0],
+ *(u32 *)&rtc[4], *(u32 *)&rtc[8]);
#endif
/* unfreeze all IOs */
@@ -1627,7 +1627,7 @@
if (ok)
ha->cache_feat = GDT_64BIT;
}
- if (force_dma32 || (!ok && ha->status == (ushort)S_NOFUNC))
+ if (force_dma32 || (!ok && ha->status == (u16)S_NOFUNC))
ok = gdth_internal_cmd(ha, CACHESERVICE, GDT_INIT, LINUX_OS, 0, 0);
if (!ok) {
printk("GDT-HA %d: Initialization error cache service (code %d)\n",
@@ -1635,7 +1635,7 @@
return 0;
}
TRACE2(("gdth_search_drives(): CACHESERVICE initialized\n"));
- cdev_cnt = (ushort)ha->info;
+ cdev_cnt = (u16)ha->info;
ha->fw_vers = ha->service;
#ifdef INT_COAL
@@ -1644,7 +1644,7 @@
pmod = (gdth_perf_modes *)ha->pscratch;
pmod->version = 1;
pmod->st_mode = 1; /* enable one status buffer */
- *((ulong64 *)&pmod->st_buff_addr1) = ha->coal_stat_phys;
+ *((u64 *)&pmod->st_buff_addr1) = ha->coal_stat_phys;
pmod->st_buff_indx1 = COALINDEX;
pmod->st_buff_addr2 = 0;
pmod->st_buff_u_addr2 = 0;
@@ -1705,7 +1705,7 @@
else
ha->bus_id[bus_no] = 0xff;
}
- ha->bus_cnt = (unchar)bus_no;
+ ha->bus_cnt = (u8)bus_no;
}
TRACE2(("gdth_search_drives() %d channels\n",ha->bus_cnt));
@@ -1789,12 +1789,12 @@
/* logical drives */
if (gdth_internal_cmd(ha, CACHESERVICE, GDT_IOCTL, CACHE_DRV_CNT,
- INVALID_CHANNEL,sizeof(ulong32))) {
- drv_cnt = *(ulong32 *)ha->pscratch;
+ INVALID_CHANNEL,sizeof(u32))) {
+ drv_cnt = *(u32 *)ha->pscratch;
if (gdth_internal_cmd(ha, CACHESERVICE, GDT_IOCTL, CACHE_DRV_LIST,
- INVALID_CHANNEL,drv_cnt * sizeof(ulong32))) {
+ INVALID_CHANNEL,drv_cnt * sizeof(u32))) {
for (j = 0; j < drv_cnt; ++j) {
- drv_no = ((ulong32 *)ha->pscratch)[j];
+ drv_no = ((u32 *)ha->pscratch)[j];
if (drv_no < MAX_LDRIVES) {
ha->hdr[drv_no].is_logdrv = TRUE;
TRACE2(("Drive %d is log. drive\n",drv_no));
@@ -1838,7 +1838,7 @@
if (ok)
ha->raw_feat = GDT_64BIT;
}
- if (force_dma32 || (!ok && ha->status == (ushort)S_NOFUNC))
+ if (force_dma32 || (!ok && ha->status == (u16)S_NOFUNC))
ok = gdth_internal_cmd(ha, SCSIRAWSERVICE, GDT_INIT, 0, 0, 0);
if (!ok) {
printk("GDT-HA %d: Initialization error raw service (code %d)\n",
@@ -1854,7 +1854,7 @@
if (gdth_internal_cmd(ha, SCSIRAWSERVICE, GDT_GET_FEAT, 0, 0, 0)) {
TRACE2(("gdth_search_dr(): get feat RAWSERVICE %d\n",
ha->info));
- ha->raw_feat |= (ushort)ha->info;
+ ha->raw_feat |= (u16)ha->info;
}
}
@@ -1865,7 +1865,7 @@
if (gdth_internal_cmd(ha, CACHESERVICE, GDT_GET_FEAT, 0, 0, 0)) {
TRACE2(("gdth_search_dr(): get feat CACHESERV. %d\n",
ha->info));
- ha->cache_feat |= (ushort)ha->info;
+ ha->cache_feat |= (u16)ha->info;
}
}
@@ -1923,9 +1923,9 @@
return 1;
}
-static int gdth_analyse_hdrive(gdth_ha_str *ha, ushort hdrive)
+static int gdth_analyse_hdrive(gdth_ha_str *ha, u16 hdrive)
{
- ulong32 drv_cyls;
+ u32 drv_cyls;
int drv_hds, drv_secs;
TRACE(("gdth_analyse_hdrive() hanum %d drive %d\n", ha->hanum, hdrive));
@@ -1944,17 +1944,17 @@
} else {
drv_hds = ha->info2 & 0xff;
drv_secs = (ha->info2 >> 8) & 0xff;
- drv_cyls = (ulong32)ha->hdr[hdrive].size / drv_hds / drv_secs;
+ drv_cyls = (u32)ha->hdr[hdrive].size / drv_hds / drv_secs;
}
- ha->hdr[hdrive].heads = (unchar)drv_hds;
- ha->hdr[hdrive].secs = (unchar)drv_secs;
+ ha->hdr[hdrive].heads = (u8)drv_hds;
+ ha->hdr[hdrive].secs = (u8)drv_secs;
/* round size */
ha->hdr[hdrive].size = drv_cyls * drv_hds * drv_secs;
if (ha->cache_feat & GDT_64BIT) {
if (gdth_internal_cmd(ha, CACHESERVICE, GDT_X_INFO, hdrive, 0, 0)
&& ha->info2 != 0) {
- ha->hdr[hdrive].size = ((ulong64)ha->info2 << 32) | ha->info;
+ ha->hdr[hdrive].size = ((u64)ha->info2 << 32) | ha->info;
}
}
TRACE2(("gdth_search_dr() cdr. %d size %d hds %d scs %d\n",
@@ -1964,7 +1964,7 @@
if (gdth_internal_cmd(ha, CACHESERVICE, GDT_DEVTYPE, hdrive, 0, 0)) {
TRACE2(("gdth_search_dr() cache drive %d devtype %d\n",
hdrive,ha->info));
- ha->hdr[hdrive].devtype = (ushort)ha->info;
+ ha->hdr[hdrive].devtype = (u16)ha->info;
}
/* cluster info */
@@ -1972,14 +1972,14 @@
TRACE2(("gdth_search_dr() cache drive %d cluster info %d\n",
hdrive,ha->info));
if (!shared_access)
- ha->hdr[hdrive].cluster_type = (unchar)ha->info;
+ ha->hdr[hdrive].cluster_type = (u8)ha->info;
}
/* R/W attributes */
if (gdth_internal_cmd(ha, CACHESERVICE, GDT_RW_ATTRIBS, hdrive, 0, 0)) {
TRACE2(("gdth_search_dr() cache drive %d r/w attrib. %d\n",
hdrive,ha->info));
- ha->hdr[hdrive].rw_attribs = (unchar)ha->info;
+ ha->hdr[hdrive].rw_attribs = (u8)ha->info;
}
return 1;
@@ -1988,12 +1988,12 @@
/* command queueing/sending functions */
-static void gdth_putq(gdth_ha_str *ha, Scsi_Cmnd *scp, unchar priority)
+static void gdth_putq(gdth_ha_str *ha, Scsi_Cmnd *scp, u8 priority)
{
struct gdth_cmndinfo *cmndinfo = gdth_cmnd_priv(scp);
register Scsi_Cmnd *pscp;
register Scsi_Cmnd *nscp;
- ulong flags;
+ unsigned long flags;
TRACE(("gdth_putq() priority %d\n",priority));
spin_lock_irqsave(&ha->smp_lock, flags);
@@ -2023,7 +2023,7 @@
++flags;
if (max_rq < flags) {
max_rq = flags;
- TRACE3(("GDT: max_rq = %d\n",(ushort)max_rq));
+ TRACE3(("GDT: max_rq = %d\n",(u16)max_rq));
}
#endif
}
@@ -2032,9 +2032,9 @@
{
register Scsi_Cmnd *pscp;
register Scsi_Cmnd *nscp;
- unchar b, t, l, firsttime;
- unchar this_cmd, next_cmd;
- ulong flags = 0;
+ u8 b, t, l, firsttime;
+ u8 this_cmd, next_cmd;
+ unsigned long flags = 0;
int cmd_index;
TRACE(("gdth_next() hanum %d\n", ha->hanum));
@@ -2282,20 +2282,20 @@
* buffers, kmap_atomic() as needed.
*/
static void gdth_copy_internal_data(gdth_ha_str *ha, Scsi_Cmnd *scp,
- char *buffer, ushort count)
+ char *buffer, u16 count)
{
- ushort cpcount,i, max_sg = scsi_sg_count(scp);
- ushort cpsum,cpnow;
+ u16 cpcount,i, max_sg = scsi_sg_count(scp);
+ u16 cpsum,cpnow;
struct scatterlist *sl;
char *address;
- cpcount = min_t(ushort, count, scsi_bufflen(scp));
+ cpcount = min_t(u16, count, scsi_bufflen(scp));
if (cpcount) {
cpsum=0;
scsi_for_each_sg(scp, sl, max_sg, i) {
unsigned long flags;
- cpnow = (ushort)sl->length;
+ cpnow = (u16)sl->length;
TRACE(("copy_internal() now %d sum %d count %d %d\n",
cpnow, cpsum, cpcount, scsi_bufflen(scp)));
if (cpsum+cpnow > cpcount)
@@ -2325,7 +2325,7 @@
static int gdth_internal_cache_cmd(gdth_ha_str *ha, Scsi_Cmnd *scp)
{
- unchar t;
+ u8 t;
gdth_inq_data inq;
gdth_rdcap_data rdc;
gdth_sense_data sd;
@@ -2389,7 +2389,7 @@
case READ_CAPACITY:
TRACE2(("Read capacity hdrive %d\n",t));
- if (ha->hdr[t].size > (ulong64)0xffffffff)
+ if (ha->hdr[t].size > (u64)0xffffffff)
rdc.last_block_no = 0xffffffff;
else
rdc.last_block_no = cpu_to_be32(ha->hdr[t].size-1);
@@ -2425,12 +2425,12 @@
return 0;
}
-static int gdth_fill_cache_cmd(gdth_ha_str *ha, Scsi_Cmnd *scp, ushort hdrive)
+static int gdth_fill_cache_cmd(gdth_ha_str *ha, Scsi_Cmnd *scp, u16 hdrive)
{
register gdth_cmd_str *cmdp;
struct gdth_cmndinfo *cmndinfo = gdth_cmnd_priv(scp);
- ulong32 cnt, blockcnt;
- ulong64 no, blockno;
+ u32 cnt, blockcnt;
+ u64 no, blockno;
int i, cmd_index, read_write, sgcnt, mode64;
cmdp = ha->pccb;
@@ -2498,17 +2498,17 @@
if (read_write) {
if (scp->cmd_len == 16) {
- memcpy(&no, &scp->cmnd[2], sizeof(ulong64));
+ memcpy(&no, &scp->cmnd[2], sizeof(u64));
blockno = be64_to_cpu(no);
- memcpy(&cnt, &scp->cmnd[10], sizeof(ulong32));
+ memcpy(&cnt, &scp->cmnd[10], sizeof(u32));
blockcnt = be32_to_cpu(cnt);
} else if (scp->cmd_len == 10) {
- memcpy(&no, &scp->cmnd[2], sizeof(ulong32));
+ memcpy(&no, &scp->cmnd[2], sizeof(u32));
blockno = be32_to_cpu(no);
- memcpy(&cnt, &scp->cmnd[7], sizeof(ushort));
+ memcpy(&cnt, &scp->cmnd[7], sizeof(u16));
blockcnt = be16_to_cpu(cnt);
} else {
- memcpy(&no, &scp->cmnd[0], sizeof(ulong32));
+ memcpy(&no, &scp->cmnd[0], sizeof(u32));
blockno = be32_to_cpu(no) & 0x001fffffUL;
blockcnt= scp->cmnd[4]==0 ? 0x100 : scp->cmnd[4];
}
@@ -2516,7 +2516,7 @@
cmdp->u.cache64.BlockNo = blockno;
cmdp->u.cache64.BlockCnt = blockcnt;
} else {
- cmdp->u.cache.BlockNo = (ulong32)blockno;
+ cmdp->u.cache.BlockNo = (u32)blockno;
cmdp->u.cache.BlockCnt = blockcnt;
}
@@ -2528,12 +2528,12 @@
if (mode64) {
struct scatterlist *sl;
- cmdp->u.cache64.DestAddr= (ulong64)-1;
+ cmdp->u.cache64.DestAddr= (u64)-1;
cmdp->u.cache64.sg_canz = sgcnt;
scsi_for_each_sg(scp, sl, sgcnt, i) {
cmdp->u.cache64.sg_lst[i].sg_ptr = sg_dma_address(sl);
#ifdef GDTH_DMA_STATISTICS
- if (cmdp->u.cache64.sg_lst[i].sg_ptr > (ulong64)0xffffffff)
+ if (cmdp->u.cache64.sg_lst[i].sg_ptr > (u64)0xffffffff)
ha->dma64_cnt++;
else
ha->dma32_cnt++;
@@ -2555,8 +2555,8 @@
}
#ifdef GDTH_STATISTICS
- if (max_sg < (ulong32)sgcnt) {
- max_sg = (ulong32)sgcnt;
+ if (max_sg < (u32)sgcnt) {
+ max_sg = (u32)sgcnt;
TRACE3(("GDT: max_sg = %d\n",max_sg));
}
#endif
@@ -2572,7 +2572,7 @@
TRACE(("cache cmd: cmd %d blockno. %d, blockcnt %d\n",
cmdp->OpCode,cmdp->u.cache64.BlockNo,cmdp->u.cache64.BlockCnt));
ha->cmd_len = GDTOFFSOF(gdth_cmd_str,u.cache64.sg_lst) +
- (ushort)cmdp->u.cache64.sg_canz * sizeof(gdth_sg64_str);
+ (u16)cmdp->u.cache64.sg_canz * sizeof(gdth_sg64_str);
} else {
TRACE(("cache cmd: addr. %x sganz %x sgptr0 %x sglen0 %x\n",
cmdp->u.cache.DestAddr,cmdp->u.cache.sg_canz,
@@ -2581,7 +2581,7 @@
TRACE(("cache cmd: cmd %d blockno. %d, blockcnt %d\n",
cmdp->OpCode,cmdp->u.cache.BlockNo,cmdp->u.cache.BlockCnt));
ha->cmd_len = GDTOFFSOF(gdth_cmd_str,u.cache.sg_lst) +
- (ushort)cmdp->u.cache.sg_canz * sizeof(gdth_sg_str);
+ (u16)cmdp->u.cache.sg_canz * sizeof(gdth_sg_str);
}
if (ha->cmd_len & 3)
ha->cmd_len += (4 - (ha->cmd_len & 3));
@@ -2600,15 +2600,15 @@
return cmd_index;
}
-static int gdth_fill_raw_cmd(gdth_ha_str *ha, Scsi_Cmnd *scp, unchar b)
+static int gdth_fill_raw_cmd(gdth_ha_str *ha, Scsi_Cmnd *scp, u8 b)
{
register gdth_cmd_str *cmdp;
- ushort i;
+ u16 i;
dma_addr_t sense_paddr;
int cmd_index, sgcnt, mode64;
- unchar t,l;
+ u8 t,l;
struct page *page;
- ulong offset;
+ unsigned long offset;
struct gdth_cmndinfo *cmndinfo;
t = scp->device->id;
@@ -2654,7 +2654,7 @@
} else {
page = virt_to_page(scp->sense_buffer);
- offset = (ulong)scp->sense_buffer & ~PAGE_MASK;
+ offset = (unsigned long)scp->sense_buffer & ~PAGE_MASK;
sense_paddr = pci_map_page(ha->pdev,page,offset,
16,PCI_DMA_FROMDEVICE);
@@ -2703,12 +2703,12 @@
if (mode64) {
struct scatterlist *sl;
- cmdp->u.raw64.sdata = (ulong64)-1;
+ cmdp->u.raw64.sdata = (u64)-1;
cmdp->u.raw64.sg_ranz = sgcnt;
scsi_for_each_sg(scp, sl, sgcnt, i) {
cmdp->u.raw64.sg_lst[i].sg_ptr = sg_dma_address(sl);
#ifdef GDTH_DMA_STATISTICS
- if (cmdp->u.raw64.sg_lst[i].sg_ptr > (ulong64)0xffffffff)
+ if (cmdp->u.raw64.sg_lst[i].sg_ptr > (u64)0xffffffff)
ha->dma64_cnt++;
else
ha->dma32_cnt++;
@@ -2744,7 +2744,7 @@
cmdp->u.raw64.sg_lst[0].sg_len));
/* evaluate command size */
ha->cmd_len = GDTOFFSOF(gdth_cmd_str,u.raw64.sg_lst) +
- (ushort)cmdp->u.raw64.sg_ranz * sizeof(gdth_sg64_str);
+ (u16)cmdp->u.raw64.sg_ranz * sizeof(gdth_sg64_str);
} else {
TRACE(("raw cmd: addr. %x sganz %x sgptr0 %x sglen0 %x\n",
cmdp->u.raw.sdata,cmdp->u.raw.sg_ranz,
@@ -2752,7 +2752,7 @@
cmdp->u.raw.sg_lst[0].sg_len));
/* evaluate command size */
ha->cmd_len = GDTOFFSOF(gdth_cmd_str,u.raw.sg_lst) +
- (ushort)cmdp->u.raw.sg_ranz * sizeof(gdth_sg_str);
+ (u16)cmdp->u.raw.sg_ranz * sizeof(gdth_sg_str);
}
}
/* check space */
@@ -2802,7 +2802,7 @@
if (cmdp->OpCode == GDT_IOCTL) {
TRACE2(("IOCTL\n"));
ha->cmd_len =
- GDTOFFSOF(gdth_cmd_str,u.ioctl.p_param) + sizeof(ulong64);
+ GDTOFFSOF(gdth_cmd_str,u.ioctl.p_param) + sizeof(u64);
} else if (cmdp->Service == CACHESERVICE) {
TRACE2(("cache command %d\n",cmdp->OpCode));
if (ha->cache_feat & GDT_64BIT)
@@ -2840,8 +2840,8 @@
/* Controller event handling functions */
-static gdth_evt_str *gdth_store_event(gdth_ha_str *ha, ushort source,
- ushort idx, gdth_evt_data *evt)
+static gdth_evt_str *gdth_store_event(gdth_ha_str *ha, u16 source,
+ u16 idx, gdth_evt_data *evt)
{
gdth_evt_str *e;
struct timeval tv;
@@ -2890,7 +2890,7 @@
{
gdth_evt_str *e;
int eindex;
- ulong flags;
+ unsigned long flags;
TRACE2(("gdth_read_event() handle %d\n", handle));
spin_lock_irqsave(&ha->smp_lock, flags);
@@ -2919,12 +2919,12 @@
}
static void gdth_readapp_event(gdth_ha_str *ha,
- unchar application, gdth_evt_str *estr)
+ u8 application, gdth_evt_str *estr)
{
gdth_evt_str *e;
int eindex;
- ulong flags;
- unchar found = FALSE;
+ unsigned long flags;
+ u8 found = FALSE;
TRACE2(("gdth_readapp_event() app. %d\n", application));
spin_lock_irqsave(&ha->smp_lock, flags);
@@ -2969,9 +2969,9 @@
gdt2_dpram_str __iomem *dp2_ptr;
Scsi_Cmnd *scp;
int rval, i;
- unchar IStatus;
- ushort Service;
- ulong flags = 0;
+ u8 IStatus;
+ u16 Service;
+ unsigned long flags = 0;
#ifdef INT_COAL
int coalesced = FALSE;
int next = FALSE;
@@ -3018,7 +3018,7 @@
if (coalesced) {
/* For coalesced requests all status
information is found in the status buffer */
- IStatus = (unchar)(pcs->status & 0xff);
+ IStatus = (u8)(pcs->status & 0xff);
}
#endif
@@ -3197,7 +3197,7 @@
++act_int_coal;
if (act_int_coal > max_int_coal) {
max_int_coal = act_int_coal;
- printk("GDT: max_int_coal = %d\n",(ushort)max_int_coal);
+ printk("GDT: max_int_coal = %d\n",(u16)max_int_coal);
}
#endif
/* see if there is another status */
@@ -3225,12 +3225,12 @@
return __gdth_interrupt(ha, false, NULL);
}
-static int gdth_sync_event(gdth_ha_str *ha, int service, unchar index,
+static int gdth_sync_event(gdth_ha_str *ha, int service, u8 index,
Scsi_Cmnd *scp)
{
gdth_msg_str *msg;
gdth_cmd_str *cmdp;
- unchar b, t;
+ u8 b, t;
struct gdth_cmndinfo *cmndinfo = gdth_cmnd_priv(scp);
cmdp = ha->pccb;
@@ -3263,7 +3263,7 @@
cmdp->u.screen.su.msg.msg_addr = ha->msg_phys;
ha->cmd_offs_dpmem = 0;
ha->cmd_len = GDTOFFSOF(gdth_cmd_str,u.screen.su.msg.msg_addr)
- + sizeof(ulong64);
+ + sizeof(u64);
ha->cmd_cnt = 0;
gdth_copy_command(ha);
gdth_release_event(ha);
@@ -3297,7 +3297,7 @@
cmdp->u.screen.su.msg.msg_addr = ha->msg_phys;
ha->cmd_offs_dpmem = 0;
ha->cmd_len = GDTOFFSOF(gdth_cmd_str,u.screen.su.msg.msg_addr)
- + sizeof(ulong64);
+ + sizeof(u64);
ha->cmd_cnt = 0;
gdth_copy_command(ha);
gdth_release_event(ha);
@@ -3335,7 +3335,7 @@
cmndinfo->OpCode));
/* special commands GDT_CLUST_INFO/GDT_MOUNT ? */
if (cmndinfo->OpCode == GDT_CLUST_INFO) {
- ha->hdr[t].cluster_type = (unchar)ha->info;
+ ha->hdr[t].cluster_type = (u8)ha->info;
if (!(ha->hdr[t].cluster_type &
CLUSTER_MOUNTED)) {
/* NOT MOUNTED -> MOUNT */
@@ -3397,7 +3397,7 @@
ha->hdr[t].cluster_type &= ~CLUSTER_RESERVED;
}
memset((char*)scp->sense_buffer,0,16);
- if (ha->status == (ushort)S_CACHE_RESERV) {
+ if (ha->status == (u16)S_CACHE_RESERV) {
scp->result = (DID_OK << 16) | (RESERVATION_CONFLICT << 1);
} else {
scp->sense_buffer[0] = 0x70;
@@ -3614,16 +3614,16 @@
cmdp->u.screen.su.msg.msg_addr = ha->msg_phys;
ha->cmd_offs_dpmem = 0;
ha->cmd_len = GDTOFFSOF(gdth_cmd_str,u.screen.su.msg.msg_addr)
- + sizeof(ulong64);
+ + sizeof(u64);
ha->cmd_cnt = 0;
gdth_copy_command(ha);
if (ha->type == GDT_EISA)
- printk("[EISA slot %d] ",(ushort)ha->brd_phys);
+ printk("[EISA slot %d] ",(u16)ha->brd_phys);
else if (ha->type == GDT_ISA)
- printk("[DPMEM 0x%4X] ",(ushort)ha->brd_phys);
+ printk("[DPMEM 0x%4X] ",(u16)ha->brd_phys);
else
- printk("[PCI %d/%d] ",(ushort)(ha->brd_phys>>8),
- (ushort)((ha->brd_phys>>3)&0x1f));
+ printk("[PCI %d/%d] ",(u16)(ha->brd_phys>>8),
+ (u16)((ha->brd_phys>>3)&0x1f));
gdth_release_event(ha);
}
@@ -3640,7 +3640,7 @@
ha->dvr.eu.async.service = ha->service;
ha->dvr.eu.async.status = ha->status;
ha->dvr.eu.async.info = ha->info;
- *(ulong32 *)ha->dvr.eu.async.scsi_coord = ha->info2;
+ *(u32 *)ha->dvr.eu.async.scsi_coord = ha->info2;
}
gdth_store_event( ha, ES_ASYNC, ha->service, &ha->dvr );
gdth_log_event( &ha->dvr, NULL );
@@ -3648,8 +3648,8 @@
/* new host drive from expand? */
if (ha->service == CACHESERVICE && ha->status == 56) {
TRACE2(("gdth_async_event(): new host drive %d created\n",
- (ushort)ha->info));
- /* gdth_analyse_hdrive(hanum, (ushort)ha->info); */
+ (u16)ha->info));
+ /* gdth_analyse_hdrive(hanum, (u16)ha->info); */
}
}
return 1;
@@ -3680,13 +3680,13 @@
for (j=0,i=1; i < f[0]; i+=2) {
switch (f[i+1]) {
case 4:
- stack.b[j++] = *(ulong32*)&dvr->eu.stream[(int)f[i]];
+ stack.b[j++] = *(u32*)&dvr->eu.stream[(int)f[i]];
break;
case 2:
- stack.b[j++] = *(ushort*)&dvr->eu.stream[(int)f[i]];
+ stack.b[j++] = *(u16*)&dvr->eu.stream[(int)f[i]];
break;
case 1:
- stack.b[j++] = *(unchar*)&dvr->eu.stream[(int)f[i]];
+ stack.b[j++] = *(u8*)&dvr->eu.stream[(int)f[i]];
break;
default:
break;
@@ -3712,14 +3712,14 @@
}
#ifdef GDTH_STATISTICS
-static unchar gdth_timer_running;
+static u8 gdth_timer_running;
-static void gdth_timeout(ulong data)
+static void gdth_timeout(unsigned long data)
{
- ulong32 i;
+ u32 i;
Scsi_Cmnd *nscp;
gdth_ha_str *ha;
- ulong flags;
+ unsigned long flags;
if(unlikely(list_empty(&gdth_instances))) {
gdth_timer_running = 0;
@@ -3891,8 +3891,8 @@
{
gdth_ha_str *ha = shost_priv(scp->device->host);
struct gdth_cmndinfo *cmndinfo = gdth_cmnd_priv(scp);
- unchar b, t;
- ulong flags;
+ u8 b, t;
+ unsigned long flags;
enum blk_eh_timer_return retval = BLK_EH_NOT_HANDLED;
TRACE(("%s() cmd 0x%x\n", scp->cmnd[0], __func__));
@@ -3924,9 +3924,9 @@
{
gdth_ha_str *ha = shost_priv(scp->device->host);
int i;
- ulong flags;
+ unsigned long flags;
Scsi_Cmnd *cmnd;
- unchar b;
+ u8 b;
TRACE2(("gdth_eh_bus_reset()\n"));
@@ -3974,7 +3974,7 @@
static int gdth_bios_param(struct scsi_device *sdev,struct block_device *bdev,sector_t cap,int *ip)
{
- unchar b, t;
+ u8 b, t;
gdth_ha_str *ha = shost_priv(sdev->host);
struct scsi_device *sd;
unsigned capacity;
@@ -4062,7 +4062,7 @@
{
gdth_ioctl_event evt;
gdth_ha_str *ha;
- ulong flags;
+ unsigned long flags;
if (copy_from_user(&evt, arg, sizeof(gdth_ioctl_event)))
return -EFAULT;
@@ -4098,8 +4098,8 @@
static int ioc_lockdrv(void __user *arg)
{
gdth_ioctl_lockdrv ldrv;
- unchar i, j;
- ulong flags;
+ u8 i, j;
+ unsigned long flags;
gdth_ha_str *ha;
if (copy_from_user(&ldrv, arg, sizeof(gdth_ioctl_lockdrv)))
@@ -4165,7 +4165,7 @@
{
gdth_ioctl_general gen;
char *buf = NULL;
- ulong64 paddr;
+ u64 paddr;
gdth_ha_str *ha;
int rval;
@@ -4194,7 +4194,7 @@
gen.command.u.cache64.DeviceNo = gen.command.u.cache.DeviceNo;
/* addresses */
if (ha->cache_feat & SCATTER_GATHER) {
- gen.command.u.cache64.DestAddr = (ulong64)-1;
+ gen.command.u.cache64.DestAddr = (u64)-1;
gen.command.u.cache64.sg_canz = 1;
gen.command.u.cache64.sg_lst[0].sg_ptr = paddr;
gen.command.u.cache64.sg_lst[0].sg_len = gen.data_len;
@@ -4207,7 +4207,7 @@
if (ha->cache_feat & SCATTER_GATHER) {
gen.command.u.cache.DestAddr = 0xffffffff;
gen.command.u.cache.sg_canz = 1;
- gen.command.u.cache.sg_lst[0].sg_ptr = (ulong32)paddr;
+ gen.command.u.cache.sg_lst[0].sg_ptr = (u32)paddr;
gen.command.u.cache.sg_lst[0].sg_len = gen.data_len;
gen.command.u.cache.sg_lst[1].sg_len = 0;
} else {
@@ -4230,7 +4230,7 @@
gen.command.u.raw64.direction = gen.command.u.raw.direction;
/* addresses */
if (ha->raw_feat & SCATTER_GATHER) {
- gen.command.u.raw64.sdata = (ulong64)-1;
+ gen.command.u.raw64.sdata = (u64)-1;
gen.command.u.raw64.sg_ranz = 1;
gen.command.u.raw64.sg_lst[0].sg_ptr = paddr;
gen.command.u.raw64.sg_lst[0].sg_len = gen.data_len;
@@ -4244,14 +4244,14 @@
if (ha->raw_feat & SCATTER_GATHER) {
gen.command.u.raw.sdata = 0xffffffff;
gen.command.u.raw.sg_ranz = 1;
- gen.command.u.raw.sg_lst[0].sg_ptr = (ulong32)paddr;
+ gen.command.u.raw.sg_lst[0].sg_ptr = (u32)paddr;
gen.command.u.raw.sg_lst[0].sg_len = gen.data_len;
gen.command.u.raw.sg_lst[1].sg_len = 0;
} else {
gen.command.u.raw.sdata = paddr;
gen.command.u.raw.sg_ranz = 0;
}
- gen.command.u.raw.sense_data = (ulong32)paddr + gen.data_len;
+ gen.command.u.raw.sense_data = (u32)paddr + gen.data_len;
}
} else {
gdth_ioctl_free(ha, gen.data_len+gen.sense_len, buf, paddr);
@@ -4283,7 +4283,7 @@
gdth_ioctl_rescan *rsc;
gdth_cmd_str *cmd;
gdth_ha_str *ha;
- unchar i;
+ u8 i;
int rc = -ENOMEM;
u32 cluster_type = 0;
@@ -4335,11 +4335,11 @@
{
gdth_ioctl_rescan *rsc;
gdth_cmd_str *cmd;
- ushort i, status, hdr_cnt;
- ulong32 info;
+ u16 i, status, hdr_cnt;
+ u32 info;
int cyls, hds, secs;
int rc = -ENOMEM;
- ulong flags;
+ unsigned long flags;
gdth_ha_str *ha;
rsc = kmalloc(sizeof(*rsc), GFP_KERNEL);
@@ -4367,7 +4367,7 @@
status = __gdth_execute(ha->sdev, cmd, cmnd, 30, &info);
i = 0;
- hdr_cnt = (status == S_OK ? (ushort)info : 0);
+ hdr_cnt = (status == S_OK ? (u16)info : 0);
} else {
i = rsc->hdr_no;
hdr_cnt = i + 1;
@@ -4418,7 +4418,7 @@
status = __gdth_execute(ha->sdev, cmd, cmnd, 30, &info);
spin_lock_irqsave(&ha->smp_lock, flags);
- ha->hdr[i].devtype = (status == S_OK ? (ushort)info : 0);
+ ha->hdr[i].devtype = (status == S_OK ? (u16)info : 0);
spin_unlock_irqrestore(&ha->smp_lock, flags);
cmd->Service = CACHESERVICE;
@@ -4432,7 +4432,7 @@
spin_lock_irqsave(&ha->smp_lock, flags);
ha->hdr[i].cluster_type =
- ((status == S_OK && !shared_access) ? (ushort)info : 0);
+ ((status == S_OK && !shared_access) ? (u16)info : 0);
spin_unlock_irqrestore(&ha->smp_lock, flags);
rsc->hdr_list[i].cluster_type = ha->hdr[i].cluster_type;
@@ -4446,7 +4446,7 @@
status = __gdth_execute(ha->sdev, cmd, cmnd, 30, &info);
spin_lock_irqsave(&ha->smp_lock, flags);
- ha->hdr[i].rw_attribs = (status == S_OK ? (ushort)info : 0);
+ ha->hdr[i].rw_attribs = (status == S_OK ? (u16)info : 0);
spin_unlock_irqrestore(&ha->smp_lock, flags);
}
@@ -4466,7 +4466,7 @@
{
gdth_ha_str *ha;
Scsi_Cmnd *scp;
- ulong flags;
+ unsigned long flags;
char cmnd[MAX_COMMAND_SIZE];
void __user *argp = (void __user *)arg;
@@ -4495,9 +4495,9 @@
{
gdth_ioctl_osvers osv;
- osv.version = (unchar)(LINUX_VERSION_CODE >> 16);
- osv.subversion = (unchar)(LINUX_VERSION_CODE >> 8);
- osv.revision = (ushort)(LINUX_VERSION_CODE & 0xff);
+ osv.version = (u8)(LINUX_VERSION_CODE >> 16);
+ osv.subversion = (u8)(LINUX_VERSION_CODE >> 8);
+ osv.revision = (u16)(LINUX_VERSION_CODE & 0xff);
if (copy_to_user(argp, &osv, sizeof(gdth_ioctl_osvers)))
return -EFAULT;
break;
@@ -4512,10 +4512,10 @@
return -EFAULT;
if (ha->type == GDT_ISA || ha->type == GDT_EISA) {
- ctrt.type = (unchar)((ha->stype>>20) - 0x10);
+ ctrt.type = (u8)((ha->stype>>20) - 0x10);
} else {
if (ha->type != GDT_PCIMPR) {
- ctrt.type = (unchar)((ha->stype<<4) + 6);
+ ctrt.type = (u8)((ha->stype<<4) + 6);
} else {
ctrt.type =
(ha->oem_id == OEM_ID_INTEL ? 0xfd : 0xfe);
@@ -4546,7 +4546,7 @@
case GDTIOCTL_LOCKCHN:
{
gdth_ioctl_lockchn lchn;
- unchar i, j;
+ u8 i, j;
if (copy_from_user(&lchn, argp, sizeof(gdth_ioctl_lockchn)) ||
(NULL == (ha = gdth_find_ha(lchn.ionode))))
@@ -4670,7 +4670,7 @@
};
#ifdef CONFIG_ISA
-static int __init gdth_isa_probe_one(ulong32 isa_bios)
+static int __init gdth_isa_probe_one(u32 isa_bios)
{
struct Scsi_Host *shp;
gdth_ha_str *ha;
@@ -4802,7 +4802,7 @@
#endif /* CONFIG_ISA */
#ifdef CONFIG_EISA
-static int __init gdth_eisa_probe_one(ushort eisa_slot)
+static int __init gdth_eisa_probe_one(u16 eisa_slot)
{
struct Scsi_Host *shp;
gdth_ha_str *ha;
@@ -5120,7 +5120,7 @@
scsi_host_put(shp);
}
-static int gdth_halt(struct notifier_block *nb, ulong event, void *buf)
+static int gdth_halt(struct notifier_block *nb, unsigned long event, void *buf)
{
gdth_ha_str *ha;
@@ -5158,14 +5158,14 @@
if (probe_eisa_isa) {
/* scanning for controllers, at first: ISA controller */
#ifdef CONFIG_ISA
- ulong32 isa_bios;
+ u32 isa_bios;
for (isa_bios = 0xc8000UL; isa_bios <= 0xd8000UL;
isa_bios += 0x8000UL)
gdth_isa_probe_one(isa_bios);
#endif
#ifdef CONFIG_EISA
{
- ushort eisa_slot;
+ u16 eisa_slot;
for (eisa_slot = 0x1000; eisa_slot <= 0x8000;
eisa_slot += 0x1000)
gdth_eisa_probe_one(eisa_slot);
diff --git a/drivers/scsi/gdth.h b/drivers/scsi/gdth.h
index 1646444..120a062 100644
--- a/drivers/scsi/gdth.h
+++ b/drivers/scsi/gdth.h
@@ -321,524 +321,524 @@
/* screenservice message */
typedef struct {
- ulong32 msg_handle; /* message handle */
- ulong32 msg_len; /* size of message */
- ulong32 msg_alen; /* answer length */
- unchar msg_answer; /* answer flag */
- unchar msg_ext; /* more messages */
- unchar msg_reserved[2];
+ u32 msg_handle; /* message handle */
+ u32 msg_len; /* size of message */
+ u32 msg_alen; /* answer length */
+ u8 msg_answer; /* answer flag */
+ u8 msg_ext; /* more messages */
+ u8 msg_reserved[2];
char msg_text[MSGLEN+2]; /* the message text */
-} PACKED gdth_msg_str;
+} __attribute__((packed)) gdth_msg_str;
/* IOCTL data structures */
/* Status coalescing buffer for returning multiple requests per interrupt */
typedef struct {
- ulong32 status;
- ulong32 ext_status;
- ulong32 info0;
- ulong32 info1;
-} PACKED gdth_coal_status;
+ u32 status;
+ u32 ext_status;
+ u32 info0;
+ u32 info1;
+} __attribute__((packed)) gdth_coal_status;
/* performance mode data structure */
typedef struct {
- ulong32 version; /* The version of this IOCTL structure. */
- ulong32 st_mode; /* 0=dis., 1=st_buf_addr1 valid, 2=both */
- ulong32 st_buff_addr1; /* physical address of status buffer 1 */
- ulong32 st_buff_u_addr1; /* reserved for 64 bit addressing */
- ulong32 st_buff_indx1; /* reserved command idx. for this buffer */
- ulong32 st_buff_addr2; /* physical address of status buffer 1 */
- ulong32 st_buff_u_addr2; /* reserved for 64 bit addressing */
- ulong32 st_buff_indx2; /* reserved command idx. for this buffer */
- ulong32 st_buff_size; /* size of each buffer in bytes */
- ulong32 cmd_mode; /* 0 = mode disabled, 1 = cmd_buff_addr1 */
- ulong32 cmd_buff_addr1; /* physical address of cmd buffer 1 */
- ulong32 cmd_buff_u_addr1; /* reserved for 64 bit addressing */
- ulong32 cmd_buff_indx1; /* cmd buf addr1 unique identifier */
- ulong32 cmd_buff_addr2; /* physical address of cmd buffer 1 */
- ulong32 cmd_buff_u_addr2; /* reserved for 64 bit addressing */
- ulong32 cmd_buff_indx2; /* cmd buf addr1 unique identifier */
- ulong32 cmd_buff_size; /* size of each cmd bufer in bytes */
- ulong32 reserved1;
- ulong32 reserved2;
-} PACKED gdth_perf_modes;
+ u32 version; /* The version of this IOCTL structure. */
+ u32 st_mode; /* 0=dis., 1=st_buf_addr1 valid, 2=both */
+ u32 st_buff_addr1; /* physical address of status buffer 1 */
+ u32 st_buff_u_addr1; /* reserved for 64 bit addressing */
+ u32 st_buff_indx1; /* reserved command idx. for this buffer */
+ u32 st_buff_addr2; /* physical address of status buffer 1 */
+ u32 st_buff_u_addr2; /* reserved for 64 bit addressing */
+ u32 st_buff_indx2; /* reserved command idx. for this buffer */
+ u32 st_buff_size; /* size of each buffer in bytes */
+ u32 cmd_mode; /* 0 = mode disabled, 1 = cmd_buff_addr1 */
+ u32 cmd_buff_addr1; /* physical address of cmd buffer 1 */
+ u32 cmd_buff_u_addr1; /* reserved for 64 bit addressing */
+ u32 cmd_buff_indx1; /* cmd buf addr1 unique identifier */
+ u32 cmd_buff_addr2; /* physical address of cmd buffer 1 */
+ u32 cmd_buff_u_addr2; /* reserved for 64 bit addressing */
+ u32 cmd_buff_indx2; /* cmd buf addr1 unique identifier */
+ u32 cmd_buff_size; /* size of each cmd bufer in bytes */
+ u32 reserved1;
+ u32 reserved2;
+} __attribute__((packed)) gdth_perf_modes;
/* SCSI drive info */
typedef struct {
- unchar vendor[8]; /* vendor string */
- unchar product[16]; /* product string */
- unchar revision[4]; /* revision */
- ulong32 sy_rate; /* current rate for sync. tr. */
- ulong32 sy_max_rate; /* max. rate for sync. tr. */
- ulong32 no_ldrive; /* belongs to this log. drv.*/
- ulong32 blkcnt; /* number of blocks */
- ushort blksize; /* size of block in bytes */
- unchar available; /* flag: access is available */
- unchar init; /* medium is initialized */
- unchar devtype; /* SCSI devicetype */
- unchar rm_medium; /* medium is removable */
- unchar wp_medium; /* medium is write protected */
- unchar ansi; /* SCSI I/II or III? */
- unchar protocol; /* same as ansi */
- unchar sync; /* flag: sync. transfer enab. */
- unchar disc; /* flag: disconnect enabled */
- unchar queueing; /* flag: command queing enab. */
- unchar cached; /* flag: caching enabled */
- unchar target_id; /* target ID of device */
- unchar lun; /* LUN id of device */
- unchar orphan; /* flag: drive fragment */
- ulong32 last_error; /* sense key or drive state */
- ulong32 last_result; /* result of last command */
- ulong32 check_errors; /* err. in last surface check */
- unchar percent; /* progress for surface check */
- unchar last_check; /* IOCTRL operation */
- unchar res[2];
- ulong32 flags; /* from 1.19/2.19: raw reserv.*/
- unchar multi_bus; /* multi bus dev? (fibre ch.) */
- unchar mb_status; /* status: available? */
- unchar res2[2];
- unchar mb_alt_status; /* status on second bus */
- unchar mb_alt_bid; /* number of second bus */
- unchar mb_alt_tid; /* target id on second bus */
- unchar res3;
- unchar fc_flag; /* from 1.22/2.22: info valid?*/
- unchar res4;
- ushort fc_frame_size; /* frame size (bytes) */
+ u8 vendor[8]; /* vendor string */
+ u8 product[16]; /* product string */
+ u8 revision[4]; /* revision */
+ u32 sy_rate; /* current rate for sync. tr. */
+ u32 sy_max_rate; /* max. rate for sync. tr. */
+ u32 no_ldrive; /* belongs to this log. drv.*/
+ u32 blkcnt; /* number of blocks */
+ u16 blksize; /* size of block in bytes */
+ u8 available; /* flag: access is available */
+ u8 init; /* medium is initialized */
+ u8 devtype; /* SCSI devicetype */
+ u8 rm_medium; /* medium is removable */
+ u8 wp_medium; /* medium is write protected */
+ u8 ansi; /* SCSI I/II or III? */
+ u8 protocol; /* same as ansi */
+ u8 sync; /* flag: sync. transfer enab. */
+ u8 disc; /* flag: disconnect enabled */
+ u8 queueing; /* flag: command queing enab. */
+ u8 cached; /* flag: caching enabled */
+ u8 target_id; /* target ID of device */
+ u8 lun; /* LUN id of device */
+ u8 orphan; /* flag: drive fragment */
+ u32 last_error; /* sense key or drive state */
+ u32 last_result; /* result of last command */
+ u32 check_errors; /* err. in last surface check */
+ u8 percent; /* progress for surface check */
+ u8 last_check; /* IOCTRL operation */
+ u8 res[2];
+ u32 flags; /* from 1.19/2.19: raw reserv.*/
+ u8 multi_bus; /* multi bus dev? (fibre ch.) */
+ u8 mb_status; /* status: available? */
+ u8 res2[2];
+ u8 mb_alt_status; /* status on second bus */
+ u8 mb_alt_bid; /* number of second bus */
+ u8 mb_alt_tid; /* target id on second bus */
+ u8 res3;
+ u8 fc_flag; /* from 1.22/2.22: info valid?*/
+ u8 res4;
+ u16 fc_frame_size; /* frame size (bytes) */
char wwn[8]; /* world wide name */
-} PACKED gdth_diskinfo_str;
+} __attribute__((packed)) gdth_diskinfo_str;
/* get SCSI channel count */
typedef struct {
- ulong32 channel_no; /* number of channel */
- ulong32 drive_cnt; /* drive count */
- unchar siop_id; /* SCSI processor ID */
- unchar siop_state; /* SCSI processor state */
-} PACKED gdth_getch_str;
+ u32 channel_no; /* number of channel */
+ u32 drive_cnt; /* drive count */
+ u8 siop_id; /* SCSI processor ID */
+ u8 siop_state; /* SCSI processor state */
+} __attribute__((packed)) gdth_getch_str;
/* get SCSI drive numbers */
typedef struct {
- ulong32 sc_no; /* SCSI channel */
- ulong32 sc_cnt; /* sc_list[] elements */
- ulong32 sc_list[MAXID]; /* minor device numbers */
-} PACKED gdth_drlist_str;
+ u32 sc_no; /* SCSI channel */
+ u32 sc_cnt; /* sc_list[] elements */
+ u32 sc_list[MAXID]; /* minor device numbers */
+} __attribute__((packed)) gdth_drlist_str;
/* get grown/primary defect count */
typedef struct {
- unchar sddc_type; /* 0x08: grown, 0x10: prim. */
- unchar sddc_format; /* list entry format */
- unchar sddc_len; /* list entry length */
- unchar sddc_res;
- ulong32 sddc_cnt; /* entry count */
-} PACKED gdth_defcnt_str;
+ u8 sddc_type; /* 0x08: grown, 0x10: prim. */
+ u8 sddc_format; /* list entry format */
+ u8 sddc_len; /* list entry length */
+ u8 sddc_res;
+ u32 sddc_cnt; /* entry count */
+} __attribute__((packed)) gdth_defcnt_str;
/* disk statistics */
typedef struct {
- ulong32 bid; /* SCSI channel */
- ulong32 first; /* first SCSI disk */
- ulong32 entries; /* number of elements */
- ulong32 count; /* (R) number of init. el. */
- ulong32 mon_time; /* time stamp */
+ u32 bid; /* SCSI channel */
+ u32 first; /* first SCSI disk */
+ u32 entries; /* number of elements */
+ u32 count; /* (R) number of init. el. */
+ u32 mon_time; /* time stamp */
struct {
- unchar tid; /* target ID */
- unchar lun; /* LUN */
- unchar res[2];
- ulong32 blk_size; /* block size in bytes */
- ulong32 rd_count; /* bytes read */
- ulong32 wr_count; /* bytes written */
- ulong32 rd_blk_count; /* blocks read */
- ulong32 wr_blk_count; /* blocks written */
- ulong32 retries; /* retries */
- ulong32 reassigns; /* reassigns */
- } PACKED list[1];
-} PACKED gdth_dskstat_str;
+ u8 tid; /* target ID */
+ u8 lun; /* LUN */
+ u8 res[2];
+ u32 blk_size; /* block size in bytes */
+ u32 rd_count; /* bytes read */
+ u32 wr_count; /* bytes written */
+ u32 rd_blk_count; /* blocks read */
+ u32 wr_blk_count; /* blocks written */
+ u32 retries; /* retries */
+ u32 reassigns; /* reassigns */
+ } __attribute__((packed)) list[1];
+} __attribute__((packed)) gdth_dskstat_str;
/* IO channel header */
typedef struct {
- ulong32 version; /* version (-1UL: newest) */
- unchar list_entries; /* list entry count */
- unchar first_chan; /* first channel number */
- unchar last_chan; /* last channel number */
- unchar chan_count; /* (R) channel count */
- ulong32 list_offset; /* offset of list[0] */
-} PACKED gdth_iochan_header;
+ u32 version; /* version (-1UL: newest) */
+ u8 list_entries; /* list entry count */
+ u8 first_chan; /* first channel number */
+ u8 last_chan; /* last channel number */
+ u8 chan_count; /* (R) channel count */
+ u32 list_offset; /* offset of list[0] */
+} __attribute__((packed)) gdth_iochan_header;
/* get IO channel description */
typedef struct {
gdth_iochan_header hdr;
struct {
- ulong32 address; /* channel address */
- unchar type; /* type (SCSI, FCAL) */
- unchar local_no; /* local number */
- ushort features; /* channel features */
- } PACKED list[MAXBUS];
-} PACKED gdth_iochan_str;
+ u32 address; /* channel address */
+ u8 type; /* type (SCSI, FCAL) */
+ u8 local_no; /* local number */
+ u16 features; /* channel features */
+ } __attribute__((packed)) list[MAXBUS];
+} __attribute__((packed)) gdth_iochan_str;
/* get raw IO channel description */
typedef struct {
gdth_iochan_header hdr;
struct {
- unchar proc_id; /* processor id */
- unchar proc_defect; /* defect ? */
- unchar reserved[2];
- } PACKED list[MAXBUS];
-} PACKED gdth_raw_iochan_str;
+ u8 proc_id; /* processor id */
+ u8 proc_defect; /* defect ? */
+ u8 reserved[2];
+ } __attribute__((packed)) list[MAXBUS];
+} __attribute__((packed)) gdth_raw_iochan_str;
/* array drive component */
typedef struct {
- ulong32 al_controller; /* controller ID */
- unchar al_cache_drive; /* cache drive number */
- unchar al_status; /* cache drive state */
- unchar al_res[2];
-} PACKED gdth_arraycomp_str;
+ u32 al_controller; /* controller ID */
+ u8 al_cache_drive; /* cache drive number */
+ u8 al_status; /* cache drive state */
+ u8 al_res[2];
+} __attribute__((packed)) gdth_arraycomp_str;
/* array drive information */
typedef struct {
- unchar ai_type; /* array type (RAID0,4,5) */
- unchar ai_cache_drive_cnt; /* active cachedrives */
- unchar ai_state; /* array drive state */
- unchar ai_master_cd; /* master cachedrive */
- ulong32 ai_master_controller; /* ID of master controller */
- ulong32 ai_size; /* user capacity [sectors] */
- ulong32 ai_striping_size; /* striping size [sectors] */
- ulong32 ai_secsize; /* sector size [bytes] */
- ulong32 ai_err_info; /* failed cache drive */
- unchar ai_name[8]; /* name of the array drive */
- unchar ai_controller_cnt; /* number of controllers */
- unchar ai_removable; /* flag: removable */
- unchar ai_write_protected; /* flag: write protected */
- unchar ai_devtype; /* type: always direct access */
+ u8 ai_type; /* array type (RAID0,4,5) */
+ u8 ai_cache_drive_cnt; /* active cachedrives */
+ u8 ai_state; /* array drive state */
+ u8 ai_master_cd; /* master cachedrive */
+ u32 ai_master_controller; /* ID of master controller */
+ u32 ai_size; /* user capacity [sectors] */
+ u32 ai_striping_size; /* striping size [sectors] */
+ u32 ai_secsize; /* sector size [bytes] */
+ u32 ai_err_info; /* failed cache drive */
+ u8 ai_name[8]; /* name of the array drive */
+ u8 ai_controller_cnt; /* number of controllers */
+ u8 ai_removable; /* flag: removable */
+ u8 ai_write_protected; /* flag: write protected */
+ u8 ai_devtype; /* type: always direct access */
gdth_arraycomp_str ai_drives[35]; /* drive components: */
- unchar ai_drive_entries; /* number of drive components */
- unchar ai_protected; /* protection flag */
- unchar ai_verify_state; /* state of a parity verify */
- unchar ai_ext_state; /* extended array drive state */
- unchar ai_expand_state; /* array expand state (>=2.18)*/
- unchar ai_reserved[3];
-} PACKED gdth_arrayinf_str;
+ u8 ai_drive_entries; /* number of drive components */
+ u8 ai_protected; /* protection flag */
+ u8 ai_verify_state; /* state of a parity verify */
+ u8 ai_ext_state; /* extended array drive state */
+ u8 ai_expand_state; /* array expand state (>=2.18)*/
+ u8 ai_reserved[3];
+} __attribute__((packed)) gdth_arrayinf_str;
/* get array drive list */
typedef struct {
- ulong32 controller_no; /* controller no. */
- unchar cd_handle; /* master cachedrive */
- unchar is_arrayd; /* Flag: is array drive? */
- unchar is_master; /* Flag: is array master? */
- unchar is_parity; /* Flag: is parity drive? */
- unchar is_hotfix; /* Flag: is hotfix drive? */
- unchar res[3];
-} PACKED gdth_alist_str;
+ u32 controller_no; /* controller no. */
+ u8 cd_handle; /* master cachedrive */
+ u8 is_arrayd; /* Flag: is array drive? */
+ u8 is_master; /* Flag: is array master? */
+ u8 is_parity; /* Flag: is parity drive? */
+ u8 is_hotfix; /* Flag: is hotfix drive? */
+ u8 res[3];
+} __attribute__((packed)) gdth_alist_str;
typedef struct {
- ulong32 entries_avail; /* allocated entries */
- ulong32 entries_init; /* returned entries */
- ulong32 first_entry; /* first entry number */
- ulong32 list_offset; /* offset of following list */
+ u32 entries_avail; /* allocated entries */
+ u32 entries_init; /* returned entries */
+ u32 first_entry; /* first entry number */
+ u32 list_offset; /* offset of following list */
gdth_alist_str list[1]; /* list */
-} PACKED gdth_arcdl_str;
+} __attribute__((packed)) gdth_arcdl_str;
/* cache info/config IOCTL */
typedef struct {
- ulong32 version; /* firmware version */
- ushort state; /* cache state (on/off) */
- ushort strategy; /* cache strategy */
- ushort write_back; /* write back state (on/off) */
- ushort block_size; /* cache block size */
-} PACKED gdth_cpar_str;
+ u32 version; /* firmware version */
+ u16 state; /* cache state (on/off) */
+ u16 strategy; /* cache strategy */
+ u16 write_back; /* write back state (on/off) */
+ u16 block_size; /* cache block size */
+} __attribute__((packed)) gdth_cpar_str;
typedef struct {
- ulong32 csize; /* cache size */
- ulong32 read_cnt; /* read/write counter */
- ulong32 write_cnt;
- ulong32 tr_hits; /* hits */
- ulong32 sec_hits;
- ulong32 sec_miss; /* misses */
-} PACKED gdth_cstat_str;
+ u32 csize; /* cache size */
+ u32 read_cnt; /* read/write counter */
+ u32 write_cnt;
+ u32 tr_hits; /* hits */
+ u32 sec_hits;
+ u32 sec_miss; /* misses */
+} __attribute__((packed)) gdth_cstat_str;
typedef struct {
gdth_cpar_str cpar;
gdth_cstat_str cstat;
-} PACKED gdth_cinfo_str;
+} __attribute__((packed)) gdth_cinfo_str;
/* cache drive info */
typedef struct {
- unchar cd_name[8]; /* cache drive name */
- ulong32 cd_devtype; /* SCSI devicetype */
- ulong32 cd_ldcnt; /* number of log. drives */
- ulong32 cd_last_error; /* last error */
- unchar cd_initialized; /* drive is initialized */
- unchar cd_removable; /* media is removable */
- unchar cd_write_protected; /* write protected */
- unchar cd_flags; /* Pool Hot Fix? */
- ulong32 ld_blkcnt; /* number of blocks */
- ulong32 ld_blksize; /* blocksize */
- ulong32 ld_dcnt; /* number of disks */
- ulong32 ld_slave; /* log. drive index */
- ulong32 ld_dtype; /* type of logical drive */
- ulong32 ld_last_error; /* last error */
- unchar ld_name[8]; /* log. drive name */
- unchar ld_error; /* error */
-} PACKED gdth_cdrinfo_str;
+ u8 cd_name[8]; /* cache drive name */
+ u32 cd_devtype; /* SCSI devicetype */
+ u32 cd_ldcnt; /* number of log. drives */
+ u32 cd_last_error; /* last error */
+ u8 cd_initialized; /* drive is initialized */
+ u8 cd_removable; /* media is removable */
+ u8 cd_write_protected; /* write protected */
+ u8 cd_flags; /* Pool Hot Fix? */
+ u32 ld_blkcnt; /* number of blocks */
+ u32 ld_blksize; /* blocksize */
+ u32 ld_dcnt; /* number of disks */
+ u32 ld_slave; /* log. drive index */
+ u32 ld_dtype; /* type of logical drive */
+ u32 ld_last_error; /* last error */
+ u8 ld_name[8]; /* log. drive name */
+ u8 ld_error; /* error */
+} __attribute__((packed)) gdth_cdrinfo_str;
/* OEM string */
typedef struct {
- ulong32 ctl_version;
- ulong32 file_major_version;
- ulong32 file_minor_version;
- ulong32 buffer_size;
- ulong32 cpy_count;
- ulong32 ext_error;
- ulong32 oem_id;
- ulong32 board_id;
-} PACKED gdth_oem_str_params;
+ u32 ctl_version;
+ u32 file_major_version;
+ u32 file_minor_version;
+ u32 buffer_size;
+ u32 cpy_count;
+ u32 ext_error;
+ u32 oem_id;
+ u32 board_id;
+} __attribute__((packed)) gdth_oem_str_params;
typedef struct {
- unchar product_0_1_name[16];
- unchar product_4_5_name[16];
- unchar product_cluster_name[16];
- unchar product_reserved[16];
- unchar scsi_cluster_target_vendor_id[16];
- unchar cluster_raid_fw_name[16];
- unchar oem_brand_name[16];
- unchar oem_raid_type[16];
- unchar bios_type[13];
- unchar bios_title[50];
- unchar oem_company_name[37];
- ulong32 pci_id_1;
- ulong32 pci_id_2;
- unchar validation_status[80];
- unchar reserved_1[4];
- unchar scsi_host_drive_inquiry_vendor_id[16];
- unchar library_file_template[16];
- unchar reserved_2[16];
- unchar tool_name_1[32];
- unchar tool_name_2[32];
- unchar tool_name_3[32];
- unchar oem_contact_1[84];
- unchar oem_contact_2[84];
- unchar oem_contact_3[84];
-} PACKED gdth_oem_str;
+ u8 product_0_1_name[16];
+ u8 product_4_5_name[16];
+ u8 product_cluster_name[16];
+ u8 product_reserved[16];
+ u8 scsi_cluster_target_vendor_id[16];
+ u8 cluster_raid_fw_name[16];
+ u8 oem_brand_name[16];
+ u8 oem_raid_type[16];
+ u8 bios_type[13];
+ u8 bios_title[50];
+ u8 oem_company_name[37];
+ u32 pci_id_1;
+ u32 pci_id_2;
+ u8 validation_status[80];
+ u8 reserved_1[4];
+ u8 scsi_host_drive_inquiry_vendor_id[16];
+ u8 library_file_template[16];
+ u8 reserved_2[16];
+ u8 tool_name_1[32];
+ u8 tool_name_2[32];
+ u8 tool_name_3[32];
+ u8 oem_contact_1[84];
+ u8 oem_contact_2[84];
+ u8 oem_contact_3[84];
+} __attribute__((packed)) gdth_oem_str;
typedef struct {
gdth_oem_str_params params;
gdth_oem_str text;
-} PACKED gdth_oem_str_ioctl;
+} __attribute__((packed)) gdth_oem_str_ioctl;
/* board features */
typedef struct {
- unchar chaining; /* Chaining supported */
- unchar striping; /* Striping (RAID-0) supp. */
- unchar mirroring; /* Mirroring (RAID-1) supp. */
- unchar raid; /* RAID-4/5/10 supported */
-} PACKED gdth_bfeat_str;
+ u8 chaining; /* Chaining supported */
+ u8 striping; /* Striping (RAID-0) supp. */
+ u8 mirroring; /* Mirroring (RAID-1) supp. */
+ u8 raid; /* RAID-4/5/10 supported */
+} __attribute__((packed)) gdth_bfeat_str;
/* board info IOCTL */
typedef struct {
- ulong32 ser_no; /* serial no. */
- unchar oem_id[2]; /* OEM ID */
- ushort ep_flags; /* eprom flags */
- ulong32 proc_id; /* processor ID */
- ulong32 memsize; /* memory size (bytes) */
- unchar mem_banks; /* memory banks */
- unchar chan_type; /* channel type */
- unchar chan_count; /* channel count */
- unchar rdongle_pres; /* dongle present? */
- ulong32 epr_fw_ver; /* (eprom) firmware version */
- ulong32 upd_fw_ver; /* (update) firmware version */
- ulong32 upd_revision; /* update revision */
+ u32 ser_no; /* serial no. */
+ u8 oem_id[2]; /* OEM ID */
+ u16 ep_flags; /* eprom flags */
+ u32 proc_id; /* processor ID */
+ u32 memsize; /* memory size (bytes) */
+ u8 mem_banks; /* memory banks */
+ u8 chan_type; /* channel type */
+ u8 chan_count; /* channel count */
+ u8 rdongle_pres; /* dongle present? */
+ u32 epr_fw_ver; /* (eprom) firmware version */
+ u32 upd_fw_ver; /* (update) firmware version */
+ u32 upd_revision; /* update revision */
char type_string[16]; /* controller name */
char raid_string[16]; /* RAID firmware name */
- unchar update_pres; /* update present? */
- unchar xor_pres; /* XOR engine present? */
- unchar prom_type; /* ROM type (eprom/flash) */
- unchar prom_count; /* number of ROM devices */
- ulong32 dup_pres; /* duplexing module present? */
- ulong32 chan_pres; /* number of expansion chn. */
- ulong32 mem_pres; /* memory expansion inst. ? */
- unchar ft_bus_system; /* fault bus supported? */
- unchar subtype_valid; /* board_subtype valid? */
- unchar board_subtype; /* subtype/hardware level */
- unchar ramparity_pres; /* RAM parity check hardware? */
-} PACKED gdth_binfo_str;
+ u8 update_pres; /* update present? */
+ u8 xor_pres; /* XOR engine present? */
+ u8 prom_type; /* ROM type (eprom/flash) */
+ u8 prom_count; /* number of ROM devices */
+ u32 dup_pres; /* duplexing module present? */
+ u32 chan_pres; /* number of expansion chn. */
+ u32 mem_pres; /* memory expansion inst. ? */
+ u8 ft_bus_system; /* fault bus supported? */
+ u8 subtype_valid; /* board_subtype valid? */
+ u8 board_subtype; /* subtype/hardware level */
+ u8 ramparity_pres; /* RAM parity check hardware? */
+} __attribute__((packed)) gdth_binfo_str;
/* get host drive info */
typedef struct {
char name[8]; /* host drive name */
- ulong32 size; /* size (sectors) */
- unchar host_drive; /* host drive number */
- unchar log_drive; /* log. drive (master) */
- unchar reserved;
- unchar rw_attribs; /* r/w attribs */
- ulong32 start_sec; /* start sector */
-} PACKED gdth_hentry_str;
+ u32 size; /* size (sectors) */
+ u8 host_drive; /* host drive number */
+ u8 log_drive; /* log. drive (master) */
+ u8 reserved;
+ u8 rw_attribs; /* r/w attribs */
+ u32 start_sec; /* start sector */
+} __attribute__((packed)) gdth_hentry_str;
typedef struct {
- ulong32 entries; /* entry count */
- ulong32 offset; /* offset of entries */
- unchar secs_p_head; /* sectors/head */
- unchar heads_p_cyl; /* heads/cylinder */
- unchar reserved;
- unchar clust_drvtype; /* cluster drive type */
- ulong32 location; /* controller number */
+ u32 entries; /* entry count */
+ u32 offset; /* offset of entries */
+ u8 secs_p_head; /* sectors/head */
+ u8 heads_p_cyl; /* heads/cylinder */
+ u8 reserved;
+ u8 clust_drvtype; /* cluster drive type */
+ u32 location; /* controller number */
gdth_hentry_str entry[MAX_HDRIVES]; /* entries */
-} PACKED gdth_hget_str;
+} __attribute__((packed)) gdth_hget_str;
/* DPRAM structures */
/* interface area ISA/PCI */
typedef struct {
- unchar S_Cmd_Indx; /* special command */
- unchar volatile S_Status; /* status special command */
- ushort reserved1;
- ulong32 S_Info[4]; /* add. info special command */
- unchar volatile Sema0; /* command semaphore */
- unchar reserved2[3];
- unchar Cmd_Index; /* command number */
- unchar reserved3[3];
- ushort volatile Status; /* command status */
- ushort Service; /* service(for async.events) */
- ulong32 Info[2]; /* additional info */
+ u8 S_Cmd_Indx; /* special command */
+ u8 volatile S_Status; /* status special command */
+ u16 reserved1;
+ u32 S_Info[4]; /* add. info special command */
+ u8 volatile Sema0; /* command semaphore */
+ u8 reserved2[3];
+ u8 Cmd_Index; /* command number */
+ u8 reserved3[3];
+ u16 volatile Status; /* command status */
+ u16 Service; /* service(for async.events) */
+ u32 Info[2]; /* additional info */
struct {
- ushort offset; /* command offs. in the DPRAM*/
- ushort serv_id; /* service */
- } PACKED comm_queue[MAXOFFSETS]; /* command queue */
- ulong32 bios_reserved[2];
- unchar gdt_dpr_cmd[1]; /* commands */
-} PACKED gdt_dpr_if;
+ u16 offset; /* command offs. in the DPRAM*/
+ u16 serv_id; /* service */
+ } __attribute__((packed)) comm_queue[MAXOFFSETS]; /* command queue */
+ u32 bios_reserved[2];
+ u8 gdt_dpr_cmd[1]; /* commands */
+} __attribute__((packed)) gdt_dpr_if;
/* SRAM structure PCI controllers */
typedef struct {
- ulong32 magic; /* controller ID from BIOS */
- ushort need_deinit; /* switch betw. BIOS/driver */
- unchar switch_support; /* see need_deinit */
- unchar padding[9];
- unchar os_used[16]; /* OS code per service */
- unchar unused[28];
- unchar fw_magic; /* contr. ID from firmware */
-} PACKED gdt_pci_sram;
+ u32 magic; /* controller ID from BIOS */
+ u16 need_deinit; /* switch betw. BIOS/driver */
+ u8 switch_support; /* see need_deinit */
+ u8 padding[9];
+ u8 os_used[16]; /* OS code per service */
+ u8 unused[28];
+ u8 fw_magic; /* contr. ID from firmware */
+} __attribute__((packed)) gdt_pci_sram;
/* SRAM structure EISA controllers (but NOT GDT3000/3020) */
typedef struct {
- unchar os_used[16]; /* OS code per service */
- ushort need_deinit; /* switch betw. BIOS/driver */
- unchar switch_support; /* see need_deinit */
- unchar padding;
-} PACKED gdt_eisa_sram;
+ u8 os_used[16]; /* OS code per service */
+ u16 need_deinit; /* switch betw. BIOS/driver */
+ u8 switch_support; /* see need_deinit */
+ u8 padding;
+} __attribute__((packed)) gdt_eisa_sram;
/* DPRAM ISA controllers */
typedef struct {
union {
struct {
- unchar bios_used[0x3c00-32]; /* 15KB - 32Bytes BIOS */
- ulong32 magic; /* controller (EISA) ID */
- ushort need_deinit; /* switch betw. BIOS/driver */
- unchar switch_support; /* see need_deinit */
- unchar padding[9];
- unchar os_used[16]; /* OS code per service */
- } PACKED dp_sram;
- unchar bios_area[0x4000]; /* 16KB reserved for BIOS */
+ u8 bios_used[0x3c00-32]; /* 15KB - 32Bytes BIOS */
+ u32 magic; /* controller (EISA) ID */
+ u16 need_deinit; /* switch betw. BIOS/driver */
+ u8 switch_support; /* see need_deinit */
+ u8 padding[9];
+ u8 os_used[16]; /* OS code per service */
+ } __attribute__((packed)) dp_sram;
+ u8 bios_area[0x4000]; /* 16KB reserved for BIOS */
} bu;
union {
gdt_dpr_if ic; /* interface area */
- unchar if_area[0x3000]; /* 12KB for interface */
+ u8 if_area[0x3000]; /* 12KB for interface */
} u;
struct {
- unchar memlock; /* write protection DPRAM */
- unchar event; /* release event */
- unchar irqen; /* board interrupts enable */
- unchar irqdel; /* acknowledge board int. */
- unchar volatile Sema1; /* status semaphore */
- unchar rq; /* IRQ/DRQ configuration */
- } PACKED io;
-} PACKED gdt2_dpram_str;
+ u8 memlock; /* write protection DPRAM */
+ u8 event; /* release event */
+ u8 irqen; /* board interrupts enable */
+ u8 irqdel; /* acknowledge board int. */
+ u8 volatile Sema1; /* status semaphore */
+ u8 rq; /* IRQ/DRQ configuration */
+ } __attribute__((packed)) io;
+} __attribute__((packed)) gdt2_dpram_str;
/* DPRAM PCI controllers */
typedef struct {
union {
gdt_dpr_if ic; /* interface area */
- unchar if_area[0xff0-sizeof(gdt_pci_sram)];
+ u8 if_area[0xff0-sizeof(gdt_pci_sram)];
} u;
gdt_pci_sram gdt6sr; /* SRAM structure */
struct {
- unchar unused0[1];
- unchar volatile Sema1; /* command semaphore */
- unchar unused1[3];
- unchar irqen; /* board interrupts enable */
- unchar unused2[2];
- unchar event; /* release event */
- unchar unused3[3];
- unchar irqdel; /* acknowledge board int. */
- unchar unused4[3];
- } PACKED io;
-} PACKED gdt6_dpram_str;
+ u8 unused0[1];
+ u8 volatile Sema1; /* command semaphore */
+ u8 unused1[3];
+ u8 irqen; /* board interrupts enable */
+ u8 unused2[2];
+ u8 event; /* release event */
+ u8 unused3[3];
+ u8 irqdel; /* acknowledge board int. */
+ u8 unused4[3];
+ } __attribute__((packed)) io;
+} __attribute__((packed)) gdt6_dpram_str;
/* PLX register structure (new PCI controllers) */
typedef struct {
- unchar cfg_reg; /* DPRAM cfg.(2:below 1MB,0:anywhere)*/
- unchar unused1[0x3f];
- unchar volatile sema0_reg; /* command semaphore */
- unchar volatile sema1_reg; /* status semaphore */
- unchar unused2[2];
- ushort volatile status; /* command status */
- ushort service; /* service */
- ulong32 info[2]; /* additional info */
- unchar unused3[0x10];
- unchar ldoor_reg; /* PCI to local doorbell */
- unchar unused4[3];
- unchar volatile edoor_reg; /* local to PCI doorbell */
- unchar unused5[3];
- unchar control0; /* control0 register(unused) */
- unchar control1; /* board interrupts enable */
- unchar unused6[0x16];
-} PACKED gdt6c_plx_regs;
+ u8 cfg_reg; /* DPRAM cfg.(2:below 1MB,0:anywhere)*/
+ u8 unused1[0x3f];
+ u8 volatile sema0_reg; /* command semaphore */
+ u8 volatile sema1_reg; /* status semaphore */
+ u8 unused2[2];
+ u16 volatile status; /* command status */
+ u16 service; /* service */
+ u32 info[2]; /* additional info */
+ u8 unused3[0x10];
+ u8 ldoor_reg; /* PCI to local doorbell */
+ u8 unused4[3];
+ u8 volatile edoor_reg; /* local to PCI doorbell */
+ u8 unused5[3];
+ u8 control0; /* control0 register(unused) */
+ u8 control1; /* board interrupts enable */
+ u8 unused6[0x16];
+} __attribute__((packed)) gdt6c_plx_regs;
/* DPRAM new PCI controllers */
typedef struct {
union {
gdt_dpr_if ic; /* interface area */
- unchar if_area[0x4000-sizeof(gdt_pci_sram)];
+ u8 if_area[0x4000-sizeof(gdt_pci_sram)];
} u;
gdt_pci_sram gdt6sr; /* SRAM structure */
-} PACKED gdt6c_dpram_str;
+} __attribute__((packed)) gdt6c_dpram_str;
/* i960 register structure (PCI MPR controllers) */
typedef struct {
- unchar unused1[16];
- unchar volatile sema0_reg; /* command semaphore */
- unchar unused2;
- unchar volatile sema1_reg; /* status semaphore */
- unchar unused3;
- ushort volatile status; /* command status */
- ushort service; /* service */
- ulong32 info[2]; /* additional info */
- unchar ldoor_reg; /* PCI to local doorbell */
- unchar unused4[11];
- unchar volatile edoor_reg; /* local to PCI doorbell */
- unchar unused5[7];
- unchar edoor_en_reg; /* board interrupts enable */
- unchar unused6[27];
- ulong32 unused7[939];
- ulong32 severity;
+ u8 unused1[16];
+ u8 volatile sema0_reg; /* command semaphore */
+ u8 unused2;
+ u8 volatile sema1_reg; /* status semaphore */
+ u8 unused3;
+ u16 volatile status; /* command status */
+ u16 service; /* service */
+ u32 info[2]; /* additional info */
+ u8 ldoor_reg; /* PCI to local doorbell */
+ u8 unused4[11];
+ u8 volatile edoor_reg; /* local to PCI doorbell */
+ u8 unused5[7];
+ u8 edoor_en_reg; /* board interrupts enable */
+ u8 unused6[27];
+ u32 unused7[939];
+ u32 severity;
char evt_str[256]; /* event string */
-} PACKED gdt6m_i960_regs;
+} __attribute__((packed)) gdt6m_i960_regs;
/* DPRAM PCI MPR controllers */
typedef struct {
gdt6m_i960_regs i960r; /* 4KB i960 registers */
union {
gdt_dpr_if ic; /* interface area */
- unchar if_area[0x3000-sizeof(gdt_pci_sram)];
+ u8 if_area[0x3000-sizeof(gdt_pci_sram)];
} u;
gdt_pci_sram gdt6sr; /* SRAM structure */
-} PACKED gdt6m_dpram_str;
+} __attribute__((packed)) gdt6m_dpram_str;
/* PCI resources */
typedef struct {
struct pci_dev *pdev;
- ulong dpmem; /* DPRAM address */
- ulong io; /* IO address */
+ unsigned long dpmem; /* DPRAM address */
+ unsigned long io; /* IO address */
} gdth_pci_str;
@@ -846,93 +846,93 @@
typedef struct {
struct Scsi_Host *shost;
struct list_head list;
- ushort hanum;
- ushort oem_id; /* OEM */
- ushort type; /* controller class */
- ulong32 stype; /* subtype (PCI: device ID) */
- ushort fw_vers; /* firmware version */
- ushort cache_feat; /* feat. cache serv. (s/g,..)*/
- ushort raw_feat; /* feat. raw service (s/g,..)*/
- ushort screen_feat; /* feat. raw service (s/g,..)*/
- ushort bmic; /* BMIC address (EISA) */
+ u16 hanum;
+ u16 oem_id; /* OEM */
+ u16 type; /* controller class */
+ u32 stype; /* subtype (PCI: device ID) */
+ u16 fw_vers; /* firmware version */
+ u16 cache_feat; /* feat. cache serv. (s/g,..)*/
+ u16 raw_feat; /* feat. raw service (s/g,..)*/
+ u16 screen_feat; /* feat. raw service (s/g,..)*/
+ u16 bmic; /* BMIC address (EISA) */
void __iomem *brd; /* DPRAM address */
- ulong32 brd_phys; /* slot number/BIOS address */
+ u32 brd_phys; /* slot number/BIOS address */
gdt6c_plx_regs *plx; /* PLX regs (new PCI contr.) */
gdth_cmd_str cmdext;
gdth_cmd_str *pccb; /* address command structure */
- ulong32 ccb_phys; /* phys. address */
+ u32 ccb_phys; /* phys. address */
#ifdef INT_COAL
gdth_coal_status *coal_stat; /* buffer for coalescing int.*/
- ulong64 coal_stat_phys; /* phys. address */
+ u64 coal_stat_phys; /* phys. address */
#endif
char *pscratch; /* scratch (DMA) buffer */
- ulong64 scratch_phys; /* phys. address */
- unchar scratch_busy; /* in use? */
- unchar dma64_support; /* 64-bit DMA supported? */
+ u64 scratch_phys; /* phys. address */
+ u8 scratch_busy; /* in use? */
+ u8 dma64_support; /* 64-bit DMA supported? */
gdth_msg_str *pmsg; /* message buffer */
- ulong64 msg_phys; /* phys. address */
- unchar scan_mode; /* current scan mode */
- unchar irq; /* IRQ */
- unchar drq; /* DRQ (ISA controllers) */
- ushort status; /* command status */
- ushort service; /* service/firmware ver./.. */
- ulong32 info;
- ulong32 info2; /* additional info */
+ u64 msg_phys; /* phys. address */
+ u8 scan_mode; /* current scan mode */
+ u8 irq; /* IRQ */
+ u8 drq; /* DRQ (ISA controllers) */
+ u16 status; /* command status */
+ u16 service; /* service/firmware ver./.. */
+ u32 info;
+ u32 info2; /* additional info */
Scsi_Cmnd *req_first; /* top of request queue */
struct {
- unchar present; /* Flag: host drive present? */
- unchar is_logdrv; /* Flag: log. drive (master)? */
- unchar is_arraydrv; /* Flag: array drive? */
- unchar is_master; /* Flag: array drive master? */
- unchar is_parity; /* Flag: parity drive? */
- unchar is_hotfix; /* Flag: hotfix drive? */
- unchar master_no; /* number of master drive */
- unchar lock; /* drive locked? (hot plug) */
- unchar heads; /* mapping */
- unchar secs;
- ushort devtype; /* further information */
- ulong64 size; /* capacity */
- unchar ldr_no; /* log. drive no. */
- unchar rw_attribs; /* r/w attributes */
- unchar cluster_type; /* cluster properties */
- unchar media_changed; /* Flag:MOUNT/UNMOUNT occured */
- ulong32 start_sec; /* start sector */
+ u8 present; /* Flag: host drive present? */
+ u8 is_logdrv; /* Flag: log. drive (master)? */
+ u8 is_arraydrv; /* Flag: array drive? */
+ u8 is_master; /* Flag: array drive master? */
+ u8 is_parity; /* Flag: parity drive? */
+ u8 is_hotfix; /* Flag: hotfix drive? */
+ u8 master_no; /* number of master drive */
+ u8 lock; /* drive locked? (hot plug) */
+ u8 heads; /* mapping */
+ u8 secs;
+ u16 devtype; /* further information */
+ u64 size; /* capacity */
+ u8 ldr_no; /* log. drive no. */
+ u8 rw_attribs; /* r/w attributes */
+ u8 cluster_type; /* cluster properties */
+ u8 media_changed; /* Flag:MOUNT/UNMOUNT occured */
+ u32 start_sec; /* start sector */
} hdr[MAX_LDRIVES]; /* host drives */
struct {
- unchar lock; /* channel locked? (hot plug) */
- unchar pdev_cnt; /* physical device count */
- unchar local_no; /* local channel number */
- unchar io_cnt[MAXID]; /* current IO count */
- ulong32 address; /* channel address */
- ulong32 id_list[MAXID]; /* IDs of the phys. devices */
+ u8 lock; /* channel locked? (hot plug) */
+ u8 pdev_cnt; /* physical device count */
+ u8 local_no; /* local channel number */
+ u8 io_cnt[MAXID]; /* current IO count */
+ u32 address; /* channel address */
+ u32 id_list[MAXID]; /* IDs of the phys. devices */
} raw[MAXBUS]; /* SCSI channels */
struct {
Scsi_Cmnd *cmnd; /* pending request */
- ushort service; /* service */
+ u16 service; /* service */
} cmd_tab[GDTH_MAXCMDS]; /* table of pend. requests */
struct gdth_cmndinfo { /* per-command private info */
int index;
int internal_command; /* don't call scsi_done */
gdth_cmd_str *internal_cmd_str; /* crier for internal messages*/
dma_addr_t sense_paddr; /* sense dma-addr */
- unchar priority;
+ u8 priority;
int timeout_count; /* # of timeout calls */
volatile int wait_for_completion;
- ushort status;
- ulong32 info;
+ u16 status;
+ u32 info;
enum dma_data_direction dma_dir;
int phase; /* ???? */
int OpCode;
} cmndinfo[GDTH_MAXCMDS]; /* index==0 is free */
- unchar bus_cnt; /* SCSI bus count */
- unchar tid_cnt; /* Target ID count */
- unchar bus_id[MAXBUS]; /* IOP IDs */
- unchar virt_bus; /* number of virtual bus */
- unchar more_proc; /* more /proc info supported */
- ushort cmd_cnt; /* command count in DPRAM */
- ushort cmd_len; /* length of actual command */
- ushort cmd_offs_dpmem; /* actual offset in DPRAM */
- ushort ic_all_size; /* sizeof DPRAM interf. area */
+ u8 bus_cnt; /* SCSI bus count */
+ u8 tid_cnt; /* Target ID count */
+ u8 bus_id[MAXBUS]; /* IOP IDs */
+ u8 virt_bus; /* number of virtual bus */
+ u8 more_proc; /* more /proc info supported */
+ u16 cmd_cnt; /* command count in DPRAM */
+ u16 cmd_len; /* length of actual command */
+ u16 cmd_offs_dpmem; /* actual offset in DPRAM */
+ u16 ic_all_size; /* sizeof DPRAM interf. area */
gdth_cpar_str cpar; /* controller cache par. */
gdth_bfeat_str bfeat; /* controller features */
gdth_binfo_str binfo; /* controller info */
@@ -941,7 +941,7 @@
struct pci_dev *pdev;
char oem_name[8];
#ifdef GDTH_DMA_STATISTICS
- ulong dma32_cnt, dma64_cnt; /* statistics: DMA buffer */
+ unsigned long dma32_cnt, dma64_cnt; /* statistics: DMA buffer */
#endif
struct scsi_device *sdev;
} gdth_ha_str;
@@ -953,65 +953,65 @@
/* INQUIRY data format */
typedef struct {
- unchar type_qual;
- unchar modif_rmb;
- unchar version;
- unchar resp_aenc;
- unchar add_length;
- unchar reserved1;
- unchar reserved2;
- unchar misc;
- unchar vendor[8];
- unchar product[16];
- unchar revision[4];
-} PACKED gdth_inq_data;
+ u8 type_qual;
+ u8 modif_rmb;
+ u8 version;
+ u8 resp_aenc;
+ u8 add_length;
+ u8 reserved1;
+ u8 reserved2;
+ u8 misc;
+ u8 vendor[8];
+ u8 product[16];
+ u8 revision[4];
+} __attribute__((packed)) gdth_inq_data;
/* READ_CAPACITY data format */
typedef struct {
- ulong32 last_block_no;
- ulong32 block_length;
-} PACKED gdth_rdcap_data;
+ u32 last_block_no;
+ u32 block_length;
+} __attribute__((packed)) gdth_rdcap_data;
/* READ_CAPACITY (16) data format */
typedef struct {
- ulong64 last_block_no;
- ulong32 block_length;
-} PACKED gdth_rdcap16_data;
+ u64 last_block_no;
+ u32 block_length;
+} __attribute__((packed)) gdth_rdcap16_data;
/* REQUEST_SENSE data format */
typedef struct {
- unchar errorcode;
- unchar segno;
- unchar key;
- ulong32 info;
- unchar add_length;
- ulong32 cmd_info;
- unchar adsc;
- unchar adsq;
- unchar fruc;
- unchar key_spec[3];
-} PACKED gdth_sense_data;
+ u8 errorcode;
+ u8 segno;
+ u8 key;
+ u32 info;
+ u8 add_length;
+ u32 cmd_info;
+ u8 adsc;
+ u8 adsq;
+ u8 fruc;
+ u8 key_spec[3];
+} __attribute__((packed)) gdth_sense_data;
/* MODE_SENSE data format */
typedef struct {
struct {
- unchar data_length;
- unchar med_type;
- unchar dev_par;
- unchar bd_length;
- } PACKED hd;
+ u8 data_length;
+ u8 med_type;
+ u8 dev_par;
+ u8 bd_length;
+ } __attribute__((packed)) hd;
struct {
- unchar dens_code;
- unchar block_count[3];
- unchar reserved;
- unchar block_length[3];
- } PACKED bd;
-} PACKED gdth_modep_data;
+ u8 dens_code;
+ u8 block_count[3];
+ u8 reserved;
+ u8 block_length[3];
+ } __attribute__((packed)) bd;
+} __attribute__((packed)) gdth_modep_data;
/* stack frame */
typedef struct {
- ulong b[10]; /* 32/64 bit compiler ! */
-} PACKED gdth_stackframe;
+ unsigned long b[10]; /* 32/64 bit compiler ! */
+} __attribute__((packed)) gdth_stackframe;
/* function prototyping */
diff --git a/drivers/scsi/gdth_ioctl.h b/drivers/scsi/gdth_ioctl.h
index 783fae7..b004c61 100644
--- a/drivers/scsi/gdth_ioctl.h
+++ b/drivers/scsi/gdth_ioctl.h
@@ -32,109 +32,101 @@
#define MAX_HDRIVES MAX_LDRIVES /* max. host drive count */
#endif
-/* typedefs */
-#ifdef __KERNEL__
-typedef u32 ulong32;
-typedef u64 ulong64;
-#endif
-
-#define PACKED __attribute__((packed))
-
/* scatter/gather element */
typedef struct {
- ulong32 sg_ptr; /* address */
- ulong32 sg_len; /* length */
-} PACKED gdth_sg_str;
+ u32 sg_ptr; /* address */
+ u32 sg_len; /* length */
+} __attribute__((packed)) gdth_sg_str;
/* scatter/gather element - 64bit addresses */
typedef struct {
- ulong64 sg_ptr; /* address */
- ulong32 sg_len; /* length */
-} PACKED gdth_sg64_str;
+ u64 sg_ptr; /* address */
+ u32 sg_len; /* length */
+} __attribute__((packed)) gdth_sg64_str;
/* command structure */
typedef struct {
- ulong32 BoardNode; /* board node (always 0) */
- ulong32 CommandIndex; /* command number */
- ushort OpCode; /* the command (READ,..) */
+ u32 BoardNode; /* board node (always 0) */
+ u32 CommandIndex; /* command number */
+ u16 OpCode; /* the command (READ,..) */
union {
struct {
- ushort DeviceNo; /* number of cache drive */
- ulong32 BlockNo; /* block number */
- ulong32 BlockCnt; /* block count */
- ulong32 DestAddr; /* dest. addr. (if s/g: -1) */
- ulong32 sg_canz; /* s/g element count */
+ u16 DeviceNo; /* number of cache drive */
+ u32 BlockNo; /* block number */
+ u32 BlockCnt; /* block count */
+ u32 DestAddr; /* dest. addr. (if s/g: -1) */
+ u32 sg_canz; /* s/g element count */
gdth_sg_str sg_lst[GDTH_MAXSG]; /* s/g list */
- } PACKED cache; /* cache service cmd. str. */
+ } __attribute__((packed)) cache; /* cache service cmd. str. */
struct {
- ushort DeviceNo; /* number of cache drive */
- ulong64 BlockNo; /* block number */
- ulong32 BlockCnt; /* block count */
- ulong64 DestAddr; /* dest. addr. (if s/g: -1) */
- ulong32 sg_canz; /* s/g element count */
+ u16 DeviceNo; /* number of cache drive */
+ u64 BlockNo; /* block number */
+ u32 BlockCnt; /* block count */
+ u64 DestAddr; /* dest. addr. (if s/g: -1) */
+ u32 sg_canz; /* s/g element count */
gdth_sg64_str sg_lst[GDTH_MAXSG]; /* s/g list */
- } PACKED cache64; /* cache service cmd. str. */
+ } __attribute__((packed)) cache64; /* cache service cmd. str. */
struct {
- ushort param_size; /* size of p_param buffer */
- ulong32 subfunc; /* IOCTL function */
- ulong32 channel; /* device */
- ulong64 p_param; /* buffer */
- } PACKED ioctl; /* IOCTL command structure */
+ u16 param_size; /* size of p_param buffer */
+ u32 subfunc; /* IOCTL function */
+ u32 channel; /* device */
+ u64 p_param; /* buffer */
+ } __attribute__((packed)) ioctl; /* IOCTL command structure */
struct {
- ushort reserved;
+ u16 reserved;
union {
struct {
- ulong32 msg_handle; /* message handle */
- ulong64 msg_addr; /* message buffer address */
- } PACKED msg;
- unchar data[12]; /* buffer for rtc data, ... */
+ u32 msg_handle; /* message handle */
+ u64 msg_addr; /* message buffer address */
+ } __attribute__((packed)) msg;
+ u8 data[12]; /* buffer for rtc data, ... */
} su;
- } PACKED screen; /* screen service cmd. str. */
+ } __attribute__((packed)) screen; /* screen service cmd. str. */
struct {
- ushort reserved;
- ulong32 direction; /* data direction */
- ulong32 mdisc_time; /* disc. time (0: no timeout)*/
- ulong32 mcon_time; /* connect time(0: no to.) */
- ulong32 sdata; /* dest. addr. (if s/g: -1) */
- ulong32 sdlen; /* data length (bytes) */
- ulong32 clen; /* SCSI cmd. length(6,10,12) */
- unchar cmd[12]; /* SCSI command */
- unchar target; /* target ID */
- unchar lun; /* LUN */
- unchar bus; /* SCSI bus number */
- unchar priority; /* only 0 used */
- ulong32 sense_len; /* sense data length */
- ulong32 sense_data; /* sense data addr. */
- ulong32 link_p; /* linked cmds (not supp.) */
- ulong32 sg_ranz; /* s/g element count */
+ u16 reserved;
+ u32 direction; /* data direction */
+ u32 mdisc_time; /* disc. time (0: no timeout)*/
+ u32 mcon_time; /* connect time(0: no to.) */
+ u32 sdata; /* dest. addr. (if s/g: -1) */
+ u32 sdlen; /* data length (bytes) */
+ u32 clen; /* SCSI cmd. length(6,10,12) */
+ u8 cmd[12]; /* SCSI command */
+ u8 target; /* target ID */
+ u8 lun; /* LUN */
+ u8 bus; /* SCSI bus number */
+ u8 priority; /* only 0 used */
+ u32 sense_len; /* sense data length */
+ u32 sense_data; /* sense data addr. */
+ u32 link_p; /* linked cmds (not supp.) */
+ u32 sg_ranz; /* s/g element count */
gdth_sg_str sg_lst[GDTH_MAXSG]; /* s/g list */
- } PACKED raw; /* raw service cmd. struct. */
+ } __attribute__((packed)) raw; /* raw service cmd. struct. */
struct {
- ushort reserved;
- ulong32 direction; /* data direction */
- ulong32 mdisc_time; /* disc. time (0: no timeout)*/
- ulong32 mcon_time; /* connect time(0: no to.) */
- ulong64 sdata; /* dest. addr. (if s/g: -1) */
- ulong32 sdlen; /* data length (bytes) */
- ulong32 clen; /* SCSI cmd. length(6,..,16) */
- unchar cmd[16]; /* SCSI command */
- unchar target; /* target ID */
- unchar lun; /* LUN */
- unchar bus; /* SCSI bus number */
- unchar priority; /* only 0 used */
- ulong32 sense_len; /* sense data length */
- ulong64 sense_data; /* sense data addr. */
- ulong32 sg_ranz; /* s/g element count */
+ u16 reserved;
+ u32 direction; /* data direction */
+ u32 mdisc_time; /* disc. time (0: no timeout)*/
+ u32 mcon_time; /* connect time(0: no to.) */
+ u64 sdata; /* dest. addr. (if s/g: -1) */
+ u32 sdlen; /* data length (bytes) */
+ u32 clen; /* SCSI cmd. length(6,..,16) */
+ u8 cmd[16]; /* SCSI command */
+ u8 target; /* target ID */
+ u8 lun; /* LUN */
+ u8 bus; /* SCSI bus number */
+ u8 priority; /* only 0 used */
+ u32 sense_len; /* sense data length */
+ u64 sense_data; /* sense data addr. */
+ u32 sg_ranz; /* s/g element count */
gdth_sg64_str sg_lst[GDTH_MAXSG]; /* s/g list */
- } PACKED raw64; /* raw service cmd. struct. */
+ } __attribute__((packed)) raw64; /* raw service cmd. struct. */
} u;
/* additional variables */
- unchar Service; /* controller service */
- unchar reserved;
- ushort Status; /* command result */
- ulong32 Info; /* additional information */
+ u8 Service; /* controller service */
+ u8 reserved;
+ u16 Status; /* command result */
+ u32 Info; /* additional information */
void *RequestBuffer; /* request buffer */
-} PACKED gdth_cmd_str;
+} __attribute__((packed)) gdth_cmd_str;
/* controller event structure */
#define ES_ASYNC 1
@@ -142,129 +134,129 @@
#define ES_TEST 3
#define ES_SYNC 4
typedef struct {
- ushort size; /* size of structure */
+ u16 size; /* size of structure */
union {
char stream[16];
struct {
- ushort ionode;
- ushort service;
- ulong32 index;
- } PACKED driver;
+ u16 ionode;
+ u16 service;
+ u32 index;
+ } __attribute__((packed)) driver;
struct {
- ushort ionode;
- ushort service;
- ushort status;
- ulong32 info;
- unchar scsi_coord[3];
- } PACKED async;
+ u16 ionode;
+ u16 service;
+ u16 status;
+ u32 info;
+ u8 scsi_coord[3];
+ } __attribute__((packed)) async;
struct {
- ushort ionode;
- ushort service;
- ushort status;
- ulong32 info;
- ushort hostdrive;
- unchar scsi_coord[3];
- unchar sense_key;
- } PACKED sync;
+ u16 ionode;
+ u16 service;
+ u16 status;
+ u32 info;
+ u16 hostdrive;
+ u8 scsi_coord[3];
+ u8 sense_key;
+ } __attribute__((packed)) sync;
struct {
- ulong32 l1, l2, l3, l4;
- } PACKED test;
+ u32 l1, l2, l3, l4;
+ } __attribute__((packed)) test;
} eu;
- ulong32 severity;
- unchar event_string[256];
-} PACKED gdth_evt_data;
+ u32 severity;
+ u8 event_string[256];
+} __attribute__((packed)) gdth_evt_data;
typedef struct {
- ulong32 first_stamp;
- ulong32 last_stamp;
- ushort same_count;
- ushort event_source;
- ushort event_idx;
- unchar application;
- unchar reserved;
+ u32 first_stamp;
+ u32 last_stamp;
+ u16 same_count;
+ u16 event_source;
+ u16 event_idx;
+ u8 application;
+ u8 reserved;
gdth_evt_data event_data;
-} PACKED gdth_evt_str;
+} __attribute__((packed)) gdth_evt_str;
#ifdef GDTH_IOCTL_PROC
/* IOCTL structure (write) */
typedef struct {
- ulong32 magic; /* IOCTL magic */
- ushort ioctl; /* IOCTL */
- ushort ionode; /* controller number */
- ushort service; /* controller service */
- ushort timeout; /* timeout */
+ u32 magic; /* IOCTL magic */
+ u16 ioctl; /* IOCTL */
+ u16 ionode; /* controller number */
+ u16 service; /* controller service */
+ u16 timeout; /* timeout */
union {
struct {
- unchar command[512]; /* controller command */
- unchar data[1]; /* add. data */
+ u8 command[512]; /* controller command */
+ u8 data[1]; /* add. data */
} general;
struct {
- unchar lock; /* lock/unlock */
- unchar drive_cnt; /* drive count */
- ushort drives[MAX_HDRIVES];/* drives */
+ u8 lock; /* lock/unlock */
+ u8 drive_cnt; /* drive count */
+ u16 drives[MAX_HDRIVES];/* drives */
} lockdrv;
struct {
- unchar lock; /* lock/unlock */
- unchar channel; /* channel */
+ u8 lock; /* lock/unlock */
+ u8 channel; /* channel */
} lockchn;
struct {
int erase; /* erase event ? */
int handle;
- unchar evt[EVENT_SIZE]; /* event structure */
+ u8 evt[EVENT_SIZE]; /* event structure */
} event;
struct {
- unchar bus; /* SCSI bus */
- unchar target; /* target ID */
- unchar lun; /* LUN */
- unchar cmd_len; /* command length */
- unchar cmd[12]; /* SCSI command */
+ u8 bus; /* SCSI bus */
+ u8 target; /* target ID */
+ u8 lun; /* LUN */
+ u8 cmd_len; /* command length */
+ u8 cmd[12]; /* SCSI command */
} scsi;
struct {
- ushort hdr_no; /* host drive number */
- unchar flag; /* old meth./add/remove */
+ u16 hdr_no; /* host drive number */
+ u8 flag; /* old meth./add/remove */
} rescan;
} iu;
} gdth_iowr_str;
/* IOCTL structure (read) */
typedef struct {
- ulong32 size; /* buffer size */
- ulong32 status; /* IOCTL error code */
+ u32 size; /* buffer size */
+ u32 status; /* IOCTL error code */
union {
struct {
- unchar data[1]; /* data */
+ u8 data[1]; /* data */
} general;
struct {
- ushort version; /* driver version */
+ u16 version; /* driver version */
} drvers;
struct {
- unchar type; /* controller type */
- ushort info; /* slot etc. */
- ushort oem_id; /* OEM ID */
- ushort bios_ver; /* not used */
- ushort access; /* not used */
- ushort ext_type; /* extended type */
- ushort device_id; /* device ID */
- ushort sub_device_id; /* sub device ID */
+ u8 type; /* controller type */
+ u16 info; /* slot etc. */
+ u16 oem_id; /* OEM ID */
+ u16 bios_ver; /* not used */
+ u16 access; /* not used */
+ u16 ext_type; /* extended type */
+ u16 device_id; /* device ID */
+ u16 sub_device_id; /* sub device ID */
} ctrtype;
struct {
- unchar version; /* OS version */
- unchar subversion; /* OS subversion */
- ushort revision; /* revision */
+ u8 version; /* OS version */
+ u8 subversion; /* OS subversion */
+ u16 revision; /* revision */
} osvers;
struct {
- ushort count; /* controller count */
+ u16 count; /* controller count */
} ctrcnt;
struct {
int handle;
- unchar evt[EVENT_SIZE]; /* event structure */
+ u8 evt[EVENT_SIZE]; /* event structure */
} event;
struct {
- unchar bus; /* SCSI bus, 0xff: invalid */
- unchar target; /* target ID */
- unchar lun; /* LUN */
- unchar cluster_type; /* cluster properties */
+ u8 bus; /* SCSI bus, 0xff: invalid */
+ u8 target; /* target ID */
+ u8 lun; /* LUN */
+ u8 cluster_type; /* cluster properties */
} hdr_list[MAX_HDRIVES]; /* index is host drive number */
} iu;
} gdth_iord_str;
@@ -272,53 +264,53 @@
/* GDTIOCTL_GENERAL */
typedef struct {
- ushort ionode; /* controller number */
- ushort timeout; /* timeout */
- ulong32 info; /* error info */
- ushort status; /* status */
- ulong data_len; /* data buffer size */
- ulong sense_len; /* sense buffer size */
+ u16 ionode; /* controller number */
+ u16 timeout; /* timeout */
+ u32 info; /* error info */
+ u16 status; /* status */
+ unsigned long data_len; /* data buffer size */
+ unsigned long sense_len; /* sense buffer size */
gdth_cmd_str command; /* command */
} gdth_ioctl_general;
/* GDTIOCTL_LOCKDRV */
typedef struct {
- ushort ionode; /* controller number */
- unchar lock; /* lock/unlock */
- unchar drive_cnt; /* drive count */
- ushort drives[MAX_HDRIVES]; /* drives */
+ u16 ionode; /* controller number */
+ u8 lock; /* lock/unlock */
+ u8 drive_cnt; /* drive count */
+ u16 drives[MAX_HDRIVES]; /* drives */
} gdth_ioctl_lockdrv;
/* GDTIOCTL_LOCKCHN */
typedef struct {
- ushort ionode; /* controller number */
- unchar lock; /* lock/unlock */
- unchar channel; /* channel */
+ u16 ionode; /* controller number */
+ u8 lock; /* lock/unlock */
+ u8 channel; /* channel */
} gdth_ioctl_lockchn;
/* GDTIOCTL_OSVERS */
typedef struct {
- unchar version; /* OS version */
- unchar subversion; /* OS subversion */
- ushort revision; /* revision */
+ u8 version; /* OS version */
+ u8 subversion; /* OS subversion */
+ u16 revision; /* revision */
} gdth_ioctl_osvers;
/* GDTIOCTL_CTRTYPE */
typedef struct {
- ushort ionode; /* controller number */
- unchar type; /* controller type */
- ushort info; /* slot etc. */
- ushort oem_id; /* OEM ID */
- ushort bios_ver; /* not used */
- ushort access; /* not used */
- ushort ext_type; /* extended type */
- ushort device_id; /* device ID */
- ushort sub_device_id; /* sub device ID */
+ u16 ionode; /* controller number */
+ u8 type; /* controller type */
+ u16 info; /* slot etc. */
+ u16 oem_id; /* OEM ID */
+ u16 bios_ver; /* not used */
+ u16 access; /* not used */
+ u16 ext_type; /* extended type */
+ u16 device_id; /* device ID */
+ u16 sub_device_id; /* sub device ID */
} gdth_ioctl_ctrtype;
/* GDTIOCTL_EVENT */
typedef struct {
- ushort ionode;
+ u16 ionode;
int erase; /* erase event? */
int handle; /* event handle */
gdth_evt_str event;
@@ -326,22 +318,22 @@
/* GDTIOCTL_RESCAN/GDTIOCTL_HDRLIST */
typedef struct {
- ushort ionode; /* controller number */
- unchar flag; /* add/remove */
- ushort hdr_no; /* drive no. */
+ u16 ionode; /* controller number */
+ u8 flag; /* add/remove */
+ u16 hdr_no; /* drive no. */
struct {
- unchar bus; /* SCSI bus */
- unchar target; /* target ID */
- unchar lun; /* LUN */
- unchar cluster_type; /* cluster properties */
+ u8 bus; /* SCSI bus */
+ u8 target; /* target ID */
+ u8 lun; /* LUN */
+ u8 cluster_type; /* cluster properties */
} hdr_list[MAX_HDRIVES]; /* index is host drive number */
} gdth_ioctl_rescan;
/* GDTIOCTL_RESET_BUS/GDTIOCTL_RESET_DRV */
typedef struct {
- ushort ionode; /* controller number */
- ushort number; /* bus/host drive number */
- ushort status; /* status */
+ u16 ionode; /* controller number */
+ u16 number; /* bus/host drive number */
+ u16 status; /* status */
} gdth_ioctl_reset;
#endif
diff --git a/drivers/scsi/gdth_proc.c b/drivers/scsi/gdth_proc.c
index 1258da3..ffb2b21 100644
--- a/drivers/scsi/gdth_proc.c
+++ b/drivers/scsi/gdth_proc.c
@@ -43,7 +43,7 @@
int i, found;
gdth_cmd_str gdtcmd;
gdth_cpar_str *pcpar;
- ulong64 paddr;
+ u64 paddr;
char cmnd[MAX_COMMAND_SIZE];
memset(cmnd, 0xff, 12);
@@ -156,8 +156,8 @@
off_t begin = 0,pos = 0;
int id, i, j, k, sec, flag;
int no_mdrv = 0, drv_no, is_mirr;
- ulong32 cnt;
- ulong64 paddr;
+ u32 cnt;
+ u64 paddr;
int rc = -ENOMEM;
gdth_cmd_str *gdtcmd;
@@ -220,14 +220,14 @@
if (ha->more_proc)
sprintf(hrec, "%d.%02d.%02d-%c%03X",
- (unchar)(ha->binfo.upd_fw_ver>>24),
- (unchar)(ha->binfo.upd_fw_ver>>16),
- (unchar)(ha->binfo.upd_fw_ver),
+ (u8)(ha->binfo.upd_fw_ver>>24),
+ (u8)(ha->binfo.upd_fw_ver>>16),
+ (u8)(ha->binfo.upd_fw_ver),
ha->bfeat.raid ? 'R':'N',
ha->binfo.upd_revision);
else
- sprintf(hrec, "%d.%02d", (unchar)(ha->cpar.version>>8),
- (unchar)(ha->cpar.version));
+ sprintf(hrec, "%d.%02d", (u8)(ha->cpar.version>>8),
+ (u8)(ha->cpar.version));
size = sprintf(buffer+len,
" Driver Ver.: \t%-10s\tFirmware Ver.: \t%s\n",
@@ -281,7 +281,7 @@
pds->bid = ha->raw[i].local_no;
pds->first = 0;
pds->entries = ha->raw[i].pdev_cnt;
- cnt = (3*GDTH_SCRATCH/4 - 5 * sizeof(ulong32)) /
+ cnt = (3*GDTH_SCRATCH/4 - 5 * sizeof(u32)) /
sizeof(pds->list[0]);
if (pds->entries > cnt)
pds->entries = cnt;
@@ -604,7 +604,7 @@
size = sprintf(buffer+len,
" Capacity [MB]:\t%-6d \tStart Sector: \t%d\n",
- (ulong32)(ha->hdr[i].size/2048), ha->hdr[i].start_sec);
+ (u32)(ha->hdr[i].size/2048), ha->hdr[i].start_sec);
len += size; pos = begin + len;
if (pos < offset) {
len = 0;
@@ -664,9 +664,9 @@
}
static char *gdth_ioctl_alloc(gdth_ha_str *ha, int size, int scratch,
- ulong64 *paddr)
+ u64 *paddr)
{
- ulong flags;
+ unsigned long flags;
char *ret_val;
if (size == 0)
@@ -691,9 +691,9 @@
return ret_val;
}
-static void gdth_ioctl_free(gdth_ha_str *ha, int size, char *buf, ulong64 paddr)
+static void gdth_ioctl_free(gdth_ha_str *ha, int size, char *buf, u64 paddr)
{
- ulong flags;
+ unsigned long flags;
if (buf == ha->pscratch) {
spin_lock_irqsave(&ha->smp_lock, flags);
@@ -705,16 +705,16 @@
}
#ifdef GDTH_IOCTL_PROC
-static int gdth_ioctl_check_bin(gdth_ha_str *ha, ushort size)
+static int gdth_ioctl_check_bin(gdth_ha_str *ha, u16 size)
{
- ulong flags;
+ unsigned long flags;
int ret_val;
spin_lock_irqsave(&ha->smp_lock, flags);
ret_val = FALSE;
if (ha->scratch_busy) {
- if (((gdth_iord_str *)ha->pscratch)->size == (ulong32)size)
+ if (((gdth_iord_str *)ha->pscratch)->size == (u32)size)
ret_val = TRUE;
}
spin_unlock_irqrestore(&ha->smp_lock, flags);
@@ -724,11 +724,11 @@
static void gdth_wait_completion(gdth_ha_str *ha, int busnum, int id)
{
- ulong flags;
+ unsigned long flags;
int i;
Scsi_Cmnd *scp;
struct gdth_cmndinfo *cmndinfo;
- unchar b, t;
+ u8 b, t;
spin_lock_irqsave(&ha->smp_lock, flags);
@@ -738,8 +738,8 @@
b = scp->device->channel;
t = scp->device->id;
- if (!SPECIAL_SCP(scp) && t == (unchar)id &&
- b == (unchar)busnum) {
+ if (!SPECIAL_SCP(scp) && t == (u8)id &&
+ b == (u8)busnum) {
cmndinfo->wait_for_completion = 0;
spin_unlock_irqrestore(&ha->smp_lock, flags);
while (!cmndinfo->wait_for_completion)
diff --git a/drivers/scsi/gdth_proc.h b/drivers/scsi/gdth_proc.h
index 9b900cc..dab15f5 100644
--- a/drivers/scsi/gdth_proc.h
+++ b/drivers/scsi/gdth_proc.h
@@ -17,8 +17,8 @@
int length, gdth_ha_str *ha);
static char *gdth_ioctl_alloc(gdth_ha_str *ha, int size, int scratch,
- ulong64 *paddr);
-static void gdth_ioctl_free(gdth_ha_str *ha, int size, char *buf, ulong64 paddr);
+ u64 *paddr);
+static void gdth_ioctl_free(gdth_ha_str *ha, int size, char *buf, u64 paddr);
static void gdth_wait_completion(gdth_ha_str *ha, int busnum, int id);
#endif
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index bb96fdd..03697ba 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -52,7 +52,7 @@
#include "hpsa.h"
/* HPSA_DRIVER_VERSION must be 3 byte values (0-255) separated by '.' */
-#define HPSA_DRIVER_VERSION "1.0.0"
+#define HPSA_DRIVER_VERSION "2.0.1-3"
#define DRIVER_NAME "HP HPSA Driver (v " HPSA_DRIVER_VERSION ")"
/* How long to wait (in milliseconds) for board to go into simple mode */
@@ -77,9 +77,6 @@
/* define the PCI info for the cards we can control */
static const struct pci_device_id hpsa_pci_device_id[] = {
- {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSC, 0x103C, 0x3223},
- {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSC, 0x103C, 0x3234},
- {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSC, 0x103C, 0x323D},
{PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3241},
{PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3243},
{PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3245},
@@ -87,6 +84,9 @@
{PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3249},
{PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x324a},
{PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x324b},
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3233},
+#define PCI_DEVICE_ID_HP_CISSF 0x333f
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSF, 0x103C, 0x333F},
{PCI_VENDOR_ID_HP, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
PCI_CLASS_STORAGE_RAID << 8, 0xffff << 8, 0},
{0,}
@@ -99,9 +99,6 @@
* access = Address of the struct of function pointers
*/
static struct board_type products[] = {
- {0x3223103C, "Smart Array P800", &SA5_access},
- {0x3234103C, "Smart Array P400", &SA5_access},
- {0x323d103c, "Smart Array P700M", &SA5_access},
{0x3241103C, "Smart Array P212", &SA5_access},
{0x3243103C, "Smart Array P410", &SA5_access},
{0x3245103C, "Smart Array P410i", &SA5_access},
@@ -109,6 +106,8 @@
{0x3249103C, "Smart Array P812", &SA5_access},
{0x324a103C, "Smart Array P712m", &SA5_access},
{0x324b103C, "Smart Array P711m", &SA5_access},
+ {0x3233103C, "StorageWorks P1210m", &SA5_access},
+ {0x333F103C, "StorageWorks P1210m", &SA5_access},
{0xFFFF103C, "Unknown Smart Array", &SA5_access},
};
@@ -126,12 +125,15 @@
static void cmd_special_free(struct ctlr_info *h, struct CommandList *c);
static struct CommandList *cmd_alloc(struct ctlr_info *h);
static struct CommandList *cmd_special_alloc(struct ctlr_info *h);
-static void fill_cmd(struct CommandList *c, __u8 cmd, struct ctlr_info *h,
- void *buff, size_t size, __u8 page_code, unsigned char *scsi3addr,
+static void fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h,
+ void *buff, size_t size, u8 page_code, unsigned char *scsi3addr,
int cmd_type);
static int hpsa_scsi_queue_command(struct scsi_cmnd *cmd,
void (*done)(struct scsi_cmnd *));
+static void hpsa_scan_start(struct Scsi_Host *);
+static int hpsa_scan_finished(struct Scsi_Host *sh,
+ unsigned long elapsed_time);
static int hpsa_eh_device_reset_handler(struct scsi_cmnd *scsicmd);
static int hpsa_slave_alloc(struct scsi_device *sdev);
@@ -150,6 +152,11 @@
struct CommandList *c);
static void check_ioctl_unit_attention(struct ctlr_info *h,
struct CommandList *c);
+/* performant mode helper functions */
+static void calc_bucket_map(int *bucket, int num_buckets,
+ int nsgs, int *bucket_map);
+static void hpsa_put_ctlr_into_performant_mode(struct ctlr_info *h);
+static inline u32 next_command(struct ctlr_info *h);
static DEVICE_ATTR(raid_level, S_IRUGO, raid_level_show, NULL);
static DEVICE_ATTR(lunid, S_IRUGO, lunid_show, NULL);
@@ -173,10 +180,10 @@
.name = "hpsa",
.proc_name = "hpsa",
.queuecommand = hpsa_scsi_queue_command,
- .can_queue = 512,
+ .scan_start = hpsa_scan_start,
+ .scan_finished = hpsa_scan_finished,
.this_id = -1,
.sg_tablesize = MAXSGENTRIES,
- .cmd_per_lun = 512,
.use_clustering = ENABLE_CLUSTERING,
.eh_device_reset_handler = hpsa_eh_device_reset_handler,
.ioctl = hpsa_ioctl,
@@ -195,6 +202,12 @@
return (struct ctlr_info *) *priv;
}
+static inline struct ctlr_info *shost_to_hba(struct Scsi_Host *sh)
+{
+ unsigned long *priv = shost_priv(sh);
+ return (struct ctlr_info *) *priv;
+}
+
static struct task_struct *hpsa_scan_thread;
static DEFINE_MUTEX(hpsa_scan_mutex);
static LIST_HEAD(hpsa_scan_q);
@@ -312,7 +325,7 @@
h->busy_scanning = 1;
mutex_unlock(&hpsa_scan_mutex);
host_no = h->scsi_host ? h->scsi_host->host_no : -1;
- hpsa_update_scsi_devices(h, host_no);
+ hpsa_scan_start(h->scsi_host);
complete_all(&h->scan_wait);
mutex_lock(&hpsa_scan_mutex);
h->busy_scanning = 0;
@@ -379,8 +392,7 @@
{
struct ctlr_info *h;
struct Scsi_Host *shost = class_to_shost(dev);
- unsigned long *priv = shost_priv(shost);
- h = (struct ctlr_info *) *priv;
+ h = shost_to_hba(shost);
if (add_to_scan_list(h)) {
wake_up_process(hpsa_scan_thread);
wait_for_completion_interruptible(&h->scan_wait);
@@ -394,10 +406,44 @@
hlist_add_head(&c->list, list);
}
+static inline u32 next_command(struct ctlr_info *h)
+{
+ u32 a;
+
+ if (unlikely(h->transMethod != CFGTBL_Trans_Performant))
+ return h->access.command_completed(h);
+
+ if ((*(h->reply_pool_head) & 1) == (h->reply_pool_wraparound)) {
+ a = *(h->reply_pool_head); /* Next cmd in ring buffer */
+ (h->reply_pool_head)++;
+ h->commands_outstanding--;
+ } else {
+ a = FIFO_EMPTY;
+ }
+ /* Check for wraparound */
+ if (h->reply_pool_head == (h->reply_pool + h->max_commands)) {
+ h->reply_pool_head = h->reply_pool;
+ h->reply_pool_wraparound ^= 1;
+ }
+ return a;
+}
+
+/* set_performant_mode: Modify the tag for cciss performant
+ * set bit 0 for pull model, bits 3-1 for block fetch
+ * register number
+ */
+static void set_performant_mode(struct ctlr_info *h, struct CommandList *c)
+{
+ if (likely(h->transMethod == CFGTBL_Trans_Performant))
+ c->busaddr |= 1 | (h->blockFetchTable[c->Header.SGList] << 1);
+}
+
static void enqueue_cmd_and_start_io(struct ctlr_info *h,
struct CommandList *c)
{
unsigned long flags;
+
+ set_performant_mode(h, c);
spin_lock_irqsave(&h->lock, flags);
addQ(&h->reqQ, c);
h->Qdepth++;
@@ -422,6 +468,15 @@
return (scsi3addr[3] & 0xC0) == 0x40;
}
+static inline int is_scsi_rev_5(struct ctlr_info *h)
+{
+ if (!h->hba_inquiry_data)
+ return 0;
+ if ((h->hba_inquiry_data[2] & 0x07) == 5)
+ return 1;
+ return 0;
+}
+
static const char *raid_label[] = { "0", "4", "1(1+0)", "5", "5+1", "ADG",
"UNKNOWN"
};
@@ -431,7 +486,7 @@
struct device_attribute *attr, char *buf)
{
ssize_t l = 0;
- int rlevel;
+ unsigned char rlevel;
struct ctlr_info *h;
struct scsi_device *sdev;
struct hpsa_scsi_dev_t *hdev;
@@ -455,7 +510,7 @@
rlevel = hdev->raid_level;
spin_unlock_irqrestore(&h->lock, flags);
- if (rlevel < 0 || rlevel > RAID_UNKNOWN)
+ if (rlevel > RAID_UNKNOWN)
rlevel = RAID_UNKNOWN;
l = snprintf(buf, PAGE_SIZE, "RAID %s\n", raid_label[rlevel]);
return l;
@@ -620,6 +675,24 @@
return 0;
}
+/* Replace an entry from h->dev[] array. */
+static void hpsa_scsi_replace_entry(struct ctlr_info *h, int hostno,
+ int entry, struct hpsa_scsi_dev_t *new_entry,
+ struct hpsa_scsi_dev_t *added[], int *nadded,
+ struct hpsa_scsi_dev_t *removed[], int *nremoved)
+{
+ /* assumes h->devlock is held */
+ BUG_ON(entry < 0 || entry >= HPSA_MAX_SCSI_DEVS_PER_HBA);
+ removed[*nremoved] = h->dev[entry];
+ (*nremoved)++;
+ h->dev[entry] = new_entry;
+ added[*nadded] = new_entry;
+ (*nadded)++;
+ dev_info(&h->pdev->dev, "%s device c%db%dt%dl%d changed.\n",
+ scsi_device_type(new_entry->devtype), hostno, new_entry->bus,
+ new_entry->target, new_entry->lun);
+}
+
/* Remove an entry from h->dev[] array. */
static void hpsa_scsi_remove_entry(struct ctlr_info *h, int hostno, int entry,
struct hpsa_scsi_dev_t *removed[], int *nremoved)
@@ -628,8 +701,7 @@
int i;
struct hpsa_scsi_dev_t *sd;
- if (entry < 0 || entry >= HPSA_MAX_SCSI_DEVS_PER_HBA)
- BUG();
+ BUG_ON(entry < 0 || entry >= HPSA_MAX_SCSI_DEVS_PER_HBA);
sd = h->dev[entry];
removed[*nremoved] = h->dev[entry];
@@ -722,6 +794,8 @@
#define DEVICE_CHANGED 1
#define DEVICE_SAME 2
for (i = 0; i < haystack_size; i++) {
+ if (haystack[i] == NULL) /* previously removed. */
+ continue;
if (SCSI3ADDR_EQ(needle->scsi3addr, haystack[i]->scsi3addr)) {
*index = i;
if (device_is_the_same(needle, haystack[i]))
@@ -734,7 +808,7 @@
return DEVICE_NOT_FOUND;
}
-static int adjust_hpsa_scsi_table(struct ctlr_info *h, int hostno,
+static void adjust_hpsa_scsi_table(struct ctlr_info *h, int hostno,
struct hpsa_scsi_dev_t *sd[], int nsds)
{
/* sd contains scsi3 addresses and devtypes, and inquiry
@@ -779,12 +853,12 @@
continue; /* remove ^^^, hence i not incremented */
} else if (device_change == DEVICE_CHANGED) {
changes++;
- hpsa_scsi_remove_entry(h, hostno, i,
- removed, &nremoved);
- (void) hpsa_scsi_add_entry(h, hostno, sd[entry],
- added, &nadded);
- /* add can't fail, we just removed one. */
- sd[entry] = NULL; /* prevent it from being freed */
+ hpsa_scsi_replace_entry(h, hostno, i, sd[entry],
+ added, &nadded, removed, &nremoved);
+ /* Set it to NULL to prevent it from being freed
+ * at the bottom of hpsa_update_scsi_devices()
+ */
+ sd[entry] = NULL;
}
i++;
}
@@ -860,7 +934,6 @@
free_and_out:
kfree(added);
kfree(removed);
- return 0;
}
/*
@@ -900,7 +973,7 @@
static void hpsa_slave_destroy(struct scsi_device *sdev)
{
- return; /* nothing to do. */
+ /* nothing to do. */
}
static void hpsa_scsi_setup(struct ctlr_info *h)
@@ -908,11 +981,10 @@
h->ndevices = 0;
h->scsi_host = NULL;
spin_lock_init(&h->devlock);
- return;
}
static void complete_scsi_command(struct CommandList *cp,
- int timeout, __u32 tag)
+ int timeout, u32 tag)
{
struct scsi_cmnd *cmd;
struct ctlr_info *h;
@@ -987,7 +1059,6 @@
* required
*/
if ((asc == 0x04) && (ascq == 0x03)) {
- cmd->result = DID_NO_CONNECT << 16;
dev_warn(&h->pdev->dev, "cp %p "
"has check condition: unit "
"not ready, manual "
@@ -995,14 +1066,22 @@
break;
}
}
-
-
+ if (sense_key == ABORTED_COMMAND) {
+ /* Aborted command is retryable */
+ dev_warn(&h->pdev->dev, "cp %p "
+ "has check condition: aborted command: "
+ "ASC: 0x%x, ASCQ: 0x%x\n",
+ cp, asc, ascq);
+ cmd->result = DID_SOFT_ERROR << 16;
+ break;
+ }
/* Must be some other type of check condition */
dev_warn(&h->pdev->dev, "cp %p has check condition: "
"unknown type: "
"Sense: 0x%x, ASC: 0x%x, ASCQ: 0x%x, "
"Returning result: 0x%x, "
"cmd=[%02x %02x %02x %02x %02x "
+ "%02x %02x %02x %02x %02x %02x "
"%02x %02x %02x %02x %02x]\n",
cp, sense_key, asc, ascq,
cmd->result,
@@ -1010,7 +1089,10 @@
cmd->cmnd[2], cmd->cmnd[3],
cmd->cmnd[4], cmd->cmnd[5],
cmd->cmnd[6], cmd->cmnd[7],
- cmd->cmnd[8], cmd->cmnd[9]);
+ cmd->cmnd[8], cmd->cmnd[9],
+ cmd->cmnd[10], cmd->cmnd[11],
+ cmd->cmnd[12], cmd->cmnd[13],
+ cmd->cmnd[14], cmd->cmnd[15]);
break;
}
@@ -1086,7 +1168,7 @@
dev_warn(&h->pdev->dev, "cp %p reports abort failed\n", cp);
break;
case CMD_UNSOLICITED_ABORT:
- cmd->result = DID_ABORT << 16;
+ cmd->result = DID_RESET << 16;
dev_warn(&h->pdev->dev, "cp %p aborted do to an unsolicited "
"abort\n", cp);
break;
@@ -1119,9 +1201,11 @@
sh->max_cmd_len = MAX_COMMAND_SIZE;
sh->max_lun = HPSA_MAX_LUN;
sh->max_id = HPSA_MAX_LUN;
+ sh->can_queue = h->nr_cmds;
+ sh->cmd_per_lun = h->nr_cmds;
h->scsi_host = sh;
sh->hostdata[0] = (unsigned long) h;
- sh->irq = h->intr[SIMPLE_MODE_INT];
+ sh->irq = h->intr[PERF_MODE_INT];
sh->unique_id = sh->irq;
error = scsi_add_host(sh, &h->pdev->dev);
if (error)
@@ -1133,11 +1217,11 @@
dev_err(&h->pdev->dev, "hpsa_scsi_detect: scsi_add_host"
" failed for controller %d\n", h->ctlr);
scsi_host_put(sh);
- return -1;
+ return error;
fail:
dev_err(&h->pdev->dev, "hpsa_scsi_detect: scsi_host_alloc"
" failed for controller %d\n", h->ctlr);
- return -1;
+ return -ENOMEM;
}
static void hpsa_pci_unmap(struct pci_dev *pdev,
@@ -1160,7 +1244,7 @@
size_t buflen,
int data_direction)
{
- __u64 addr64;
+ u64 addr64;
if (buflen == 0 || data_direction == PCI_DMA_NONE) {
cp->Header.SGList = 0;
@@ -1168,14 +1252,14 @@
return;
}
- addr64 = (__u64) pci_map_single(pdev, buf, buflen, data_direction);
+ addr64 = (u64) pci_map_single(pdev, buf, buflen, data_direction);
cp->SG[0].Addr.lower =
- (__u32) (addr64 & (__u64) 0x00000000FFFFFFFF);
+ (u32) (addr64 & (u64) 0x00000000FFFFFFFF);
cp->SG[0].Addr.upper =
- (__u32) ((addr64 >> 32) & (__u64) 0x00000000FFFFFFFF);
+ (u32) ((addr64 >> 32) & (u64) 0x00000000FFFFFFFF);
cp->SG[0].Len = buflen;
- cp->Header.SGList = (__u8) 1; /* no. SGs contig in this cmd */
- cp->Header.SGTotal = (__u16) 1; /* total sgs in this cmd list */
+ cp->Header.SGList = (u8) 1; /* no. SGs contig in this cmd */
+ cp->Header.SGTotal = (u16) 1; /* total sgs in this cmd list */
}
static inline void hpsa_scsi_do_simple_cmd_core(struct ctlr_info *h,
@@ -1274,7 +1358,7 @@
if (c == NULL) { /* trouble... */
dev_warn(&h->pdev->dev, "cmd_special_alloc returned NULL!\n");
- return -1;
+ return -ENOMEM;
}
fill_cmd(c, HPSA_INQUIRY, h, buf, bufsize, page, scsi3addr, TYPE_CMD);
@@ -1366,9 +1450,8 @@
dev_err(&h->pdev->dev, "cmd_special_alloc returned NULL!\n");
return -1;
}
-
- memset(&scsi3addr[0], 0, 8); /* address the controller */
-
+ /* address the controller */
+ memset(scsi3addr, 0, sizeof(scsi3addr));
fill_cmd(c, logical ? HPSA_REPORT_LOG : HPSA_REPORT_PHYS, h,
buf, bufsize, 0, scsi3addr, TYPE_CMD);
if (extended_response)
@@ -1409,13 +1492,12 @@
unsigned char scsi3addr[], struct hpsa_scsi_dev_t *this_device)
{
#define OBDR_TAPE_INQ_SIZE 49
- unsigned char *inq_buff = NULL;
+ unsigned char *inq_buff;
- inq_buff = kmalloc(OBDR_TAPE_INQ_SIZE, GFP_KERNEL);
+ inq_buff = kzalloc(OBDR_TAPE_INQ_SIZE, GFP_KERNEL);
if (!inq_buff)
goto bail_out;
- memset(inq_buff, 0, OBDR_TAPE_INQ_SIZE);
/* Do an inquiry to the device to see what it is. */
if (hpsa_scsi_do_inquiry(h, scsi3addr, 0, inq_buff,
(unsigned char) OBDR_TAPE_INQ_SIZE) != 0) {
@@ -1485,32 +1567,51 @@
* in hpsa_find_target_lun, called by hpsa_scsi_add_entry.)
*/
static void figure_bus_target_lun(struct ctlr_info *h,
- __u8 *lunaddrbytes, int *bus, int *target, int *lun,
+ u8 *lunaddrbytes, int *bus, int *target, int *lun,
struct hpsa_scsi_dev_t *device)
{
-
- __u32 lunid;
+ u32 lunid;
if (is_logical_dev_addr_mode(lunaddrbytes)) {
/* logical device */
- memcpy(&lunid, lunaddrbytes, sizeof(lunid));
- lunid = le32_to_cpu(lunid);
-
- if (is_msa2xxx(h, device)) {
- *bus = 1;
- *target = (lunid >> 16) & 0x3fff;
- *lun = lunid & 0x00ff;
- } else {
+ if (unlikely(is_scsi_rev_5(h))) {
+ /* p1210m, logical drives lun assignments
+ * match SCSI REPORT LUNS data.
+ */
+ lunid = le32_to_cpu(*((__le32 *) lunaddrbytes));
*bus = 0;
- *lun = 0;
- *target = lunid & 0x3fff;
+ *target = 0;
+ *lun = (lunid & 0x3fff) + 1;
+ } else {
+ /* not p1210m... */
+ lunid = le32_to_cpu(*((__le32 *) lunaddrbytes));
+ if (is_msa2xxx(h, device)) {
+ /* msa2xxx way, put logicals on bus 1
+ * and match target/lun numbers box
+ * reports.
+ */
+ *bus = 1;
+ *target = (lunid >> 16) & 0x3fff;
+ *lun = lunid & 0x00ff;
+ } else {
+ /* Traditional smart array way. */
+ *bus = 0;
+ *lun = 0;
+ *target = lunid & 0x3fff;
+ }
}
} else {
/* physical device */
if (is_hba_lunid(lunaddrbytes))
- *bus = 3;
+ if (unlikely(is_scsi_rev_5(h))) {
+ *bus = 0; /* put p1210m ctlr at 0,0,0 */
+ *target = 0;
+ *lun = 0;
+ return;
+ } else
+ *bus = 3; /* traditional smartarray */
else
- *bus = 2;
+ *bus = 2; /* physical disk */
*target = -1;
*lun = -1; /* we will fill these in later. */
}
@@ -1529,7 +1630,7 @@
*/
static int add_msa2xxx_enclosure_device(struct ctlr_info *h,
struct hpsa_scsi_dev_t *tmpdevice,
- struct hpsa_scsi_dev_t *this_device, __u8 *lunaddrbytes,
+ struct hpsa_scsi_dev_t *this_device, u8 *lunaddrbytes,
int bus, int target, int lun, unsigned long lunzerobits[],
int *nmsa2xxx_enclosures)
{
@@ -1550,6 +1651,9 @@
if (is_hba_lunid(scsi3addr))
return 0; /* Don't add the RAID controller here. */
+ if (is_scsi_rev_5(h))
+ return 0; /* p1210m doesn't need to do this. */
+
#define MAX_MSA2XXX_ENCLOSURES 32
if (*nmsa2xxx_enclosures >= MAX_MSA2XXX_ENCLOSURES) {
dev_warn(&h->pdev->dev, "Maximum number of MSA2XXX "
@@ -1576,18 +1680,14 @@
*/
static int hpsa_gather_lun_info(struct ctlr_info *h,
int reportlunsize,
- struct ReportLUNdata *physdev, __u32 *nphysicals,
- struct ReportLUNdata *logdev, __u32 *nlogicals)
+ struct ReportLUNdata *physdev, u32 *nphysicals,
+ struct ReportLUNdata *logdev, u32 *nlogicals)
{
if (hpsa_scsi_do_report_phys_luns(h, physdev, reportlunsize, 0)) {
dev_err(&h->pdev->dev, "report physical LUNs failed.\n");
return -1;
}
- memcpy(nphysicals, &physdev->LUNListLength[0], sizeof(*nphysicals));
- *nphysicals = be32_to_cpu(*nphysicals) / 8;
-#ifdef DEBUG
- dev_info(&h->pdev->dev, "number of physical luns is %d\n", *nphysicals);
-#endif
+ *nphysicals = be32_to_cpu(*((__be32 *)physdev->LUNListLength)) / 8;
if (*nphysicals > HPSA_MAX_PHYS_LUN) {
dev_warn(&h->pdev->dev, "maximum physical LUNs (%d) exceeded."
" %d LUNs ignored.\n", HPSA_MAX_PHYS_LUN,
@@ -1598,11 +1698,7 @@
dev_err(&h->pdev->dev, "report logical LUNs failed.\n");
return -1;
}
- memcpy(nlogicals, &logdev->LUNListLength[0], sizeof(*nlogicals));
- *nlogicals = be32_to_cpu(*nlogicals) / 8;
-#ifdef DEBUG
- dev_info(&h->pdev->dev, "number of logical luns is %d\n", *nlogicals);
-#endif
+ *nlogicals = be32_to_cpu(*((__be32 *) logdev->LUNListLength)) / 8;
/* Reject Logicals in excess of our max capability. */
if (*nlogicals > HPSA_MAX_LUN) {
dev_warn(&h->pdev->dev,
@@ -1621,6 +1717,31 @@
return 0;
}
+u8 *figure_lunaddrbytes(struct ctlr_info *h, int raid_ctlr_position, int i,
+ int nphysicals, int nlogicals, struct ReportLUNdata *physdev_list,
+ struct ReportLUNdata *logdev_list)
+{
+ /* Helper function, figure out where the LUN ID info is coming from
+ * given index i, lists of physical and logical devices, where in
+ * the list the raid controller is supposed to appear (first or last)
+ */
+
+ int logicals_start = nphysicals + (raid_ctlr_position == 0);
+ int last_device = nphysicals + nlogicals + (raid_ctlr_position == 0);
+
+ if (i == raid_ctlr_position)
+ return RAID_CTLR_LUNID;
+
+ if (i < logicals_start)
+ return &physdev_list->LUN[i - (raid_ctlr_position == 0)][0];
+
+ if (i < last_device)
+ return &logdev_list->LUN[i - nphysicals -
+ (raid_ctlr_position == 0)][0];
+ BUG();
+ return NULL;
+}
+
static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno)
{
/* the idea here is we could get notified
@@ -1636,14 +1757,15 @@
struct ReportLUNdata *physdev_list = NULL;
struct ReportLUNdata *logdev_list = NULL;
unsigned char *inq_buff = NULL;
- __u32 nphysicals = 0;
- __u32 nlogicals = 0;
- __u32 ndev_allocated = 0;
+ u32 nphysicals = 0;
+ u32 nlogicals = 0;
+ u32 ndev_allocated = 0;
struct hpsa_scsi_dev_t **currentsd, *this_device, *tmpdevice;
int ncurrent = 0;
int reportlunsize = sizeof(*physdev_list) + HPSA_MAX_PHYS_LUN * 8;
int i, nmsa2xxx_enclosures, ndevs_to_allocate;
int bus, target, lun;
+ int raid_ctlr_position;
DECLARE_BITMAP(lunzerobits, HPSA_MAX_TARGETS_PER_CTLR);
currentsd = kzalloc(sizeof(*currentsd) * HPSA_MAX_SCSI_DEVS_PER_HBA,
@@ -1681,23 +1803,22 @@
ndev_allocated++;
}
+ if (unlikely(is_scsi_rev_5(h)))
+ raid_ctlr_position = 0;
+ else
+ raid_ctlr_position = nphysicals + nlogicals;
+
/* adjust our table of devices */
nmsa2xxx_enclosures = 0;
for (i = 0; i < nphysicals + nlogicals + 1; i++) {
- __u8 *lunaddrbytes;
+ u8 *lunaddrbytes;
/* Figure out where the LUN ID info is coming from */
- if (i < nphysicals)
- lunaddrbytes = &physdev_list->LUN[i][0];
- else
- if (i < nphysicals + nlogicals)
- lunaddrbytes =
- &logdev_list->LUN[i-nphysicals][0];
- else /* jam in the RAID controller at the end */
- lunaddrbytes = RAID_CTLR_LUNID;
-
+ lunaddrbytes = figure_lunaddrbytes(h, raid_ctlr_position,
+ i, nphysicals, nlogicals, physdev_list, logdev_list);
/* skip masked physical devices. */
- if (lunaddrbytes[3] & 0xC0 && i < nphysicals)
+ if (lunaddrbytes[3] & 0xC0 &&
+ i < nphysicals + (raid_ctlr_position == 0))
continue;
/* Get device type, vendor, model, device id */
@@ -1777,7 +1898,6 @@
kfree(inq_buff);
kfree(physdev_list);
kfree(logdev_list);
- return;
}
/* hpsa_scatter_gather takes a struct scsi_cmnd, (cmd), and does the pci
@@ -1790,7 +1910,7 @@
{
unsigned int len;
struct scatterlist *sg;
- __u64 addr64;
+ u64 addr64;
int use_sg, i;
BUG_ON(scsi_sg_count(cmd) > MAXSGENTRIES);
@@ -1803,20 +1923,20 @@
goto sglist_finished;
scsi_for_each_sg(cmd, sg, use_sg, i) {
- addr64 = (__u64) sg_dma_address(sg);
+ addr64 = (u64) sg_dma_address(sg);
len = sg_dma_len(sg);
cp->SG[i].Addr.lower =
- (__u32) (addr64 & (__u64) 0x00000000FFFFFFFF);
+ (u32) (addr64 & (u64) 0x00000000FFFFFFFF);
cp->SG[i].Addr.upper =
- (__u32) ((addr64 >> 32) & (__u64) 0x00000000FFFFFFFF);
+ (u32) ((addr64 >> 32) & (u64) 0x00000000FFFFFFFF);
cp->SG[i].Len = len;
cp->SG[i].Ext = 0; /* we are not chaining */
}
sglist_finished:
- cp->Header.SGList = (__u8) use_sg; /* no. SGs contig in this cmd */
- cp->Header.SGTotal = (__u16) use_sg; /* total sgs in this cmd list */
+ cp->Header.SGList = (u8) use_sg; /* no. SGs contig in this cmd */
+ cp->Header.SGTotal = (u16) use_sg; /* total sgs in this cmd list */
return 0;
}
@@ -1860,7 +1980,8 @@
c->scsi_cmd = cmd;
c->Header.ReplyQueue = 0; /* unused in simple mode */
memcpy(&c->Header.LUN.LunAddrBytes[0], &scsi3addr[0], 8);
- c->Header.Tag.lower = c->busaddr; /* Use k. address of cmd as tag */
+ c->Header.Tag.lower = (c->cmdindex << DIRECT_LOOKUP_SHIFT);
+ c->Header.Tag.lower |= DIRECT_LOOKUP_BIT;
/* Fill in the request block... */
@@ -1914,6 +2035,48 @@
return 0;
}
+static void hpsa_scan_start(struct Scsi_Host *sh)
+{
+ struct ctlr_info *h = shost_to_hba(sh);
+ unsigned long flags;
+
+ /* wait until any scan already in progress is finished. */
+ while (1) {
+ spin_lock_irqsave(&h->scan_lock, flags);
+ if (h->scan_finished)
+ break;
+ spin_unlock_irqrestore(&h->scan_lock, flags);
+ wait_event(h->scan_wait_queue, h->scan_finished);
+ /* Note: We don't need to worry about a race between this
+ * thread and driver unload because the midlayer will
+ * have incremented the reference count, so unload won't
+ * happen if we're in here.
+ */
+ }
+ h->scan_finished = 0; /* mark scan as in progress */
+ spin_unlock_irqrestore(&h->scan_lock, flags);
+
+ hpsa_update_scsi_devices(h, h->scsi_host->host_no);
+
+ spin_lock_irqsave(&h->scan_lock, flags);
+ h->scan_finished = 1; /* mark scan as finished. */
+ wake_up_all(&h->scan_wait_queue);
+ spin_unlock_irqrestore(&h->scan_lock, flags);
+}
+
+static int hpsa_scan_finished(struct Scsi_Host *sh,
+ unsigned long elapsed_time)
+{
+ struct ctlr_info *h = shost_to_hba(sh);
+ unsigned long flags;
+ int finished;
+
+ spin_lock_irqsave(&h->scan_lock, flags);
+ finished = h->scan_finished;
+ spin_unlock_irqrestore(&h->scan_lock, flags);
+ return finished;
+}
+
static void hpsa_unregister_scsi(struct ctlr_info *h)
{
/* we are being forcibly unloaded, and may not refuse. */
@@ -1926,7 +2089,6 @@
{
int rc;
- hpsa_update_scsi_devices(h, -1);
rc = hpsa_scsi_detect(h);
if (rc != 0)
dev_err(&h->pdev->dev, "hpsa_register_scsi: failed"
@@ -2003,14 +2165,14 @@
h = sdev_to_hba(scsicmd->device);
if (h == NULL) /* paranoia */
return FAILED;
- dev_warn(&h->pdev->dev, "resetting drive\n");
-
dev = scsicmd->device->hostdata;
if (!dev) {
dev_err(&h->pdev->dev, "hpsa_eh_device_reset_handler: "
"device lookup failed.\n");
return FAILED;
}
+ dev_warn(&h->pdev->dev, "resetting device %d:%d:%d:%d\n",
+ h->scsi_host->host_no, dev->bus, dev->target, dev->lun);
/* send a reset to the SCSI LUN which the command was sent to */
rc = hpsa_send_reset(h, dev->scsi3addr);
if (rc == 0 && wait_for_device_to_become_ready(h, dev->scsi3addr) == 0)
@@ -2053,8 +2215,8 @@
c->cmdindex = i;
INIT_HLIST_NODE(&c->list);
- c->busaddr = (__u32) cmd_dma_handle;
- temp64.val = (__u64) err_dma_handle;
+ c->busaddr = (u32) cmd_dma_handle;
+ temp64.val = (u64) err_dma_handle;
c->ErrDesc.Addr.lower = temp64.val32.lower;
c->ErrDesc.Addr.upper = temp64.val32.upper;
c->ErrDesc.Len = sizeof(*c->err_info);
@@ -2091,8 +2253,8 @@
memset(c->err_info, 0, sizeof(*c->err_info));
INIT_HLIST_NODE(&c->list);
- c->busaddr = (__u32) cmd_dma_handle;
- temp64.val = (__u64) err_dma_handle;
+ c->busaddr = (u32) cmd_dma_handle;
+ temp64.val = (u64) err_dma_handle;
c->ErrDesc.Addr.lower = temp64.val32.lower;
c->ErrDesc.Addr.upper = temp64.val32.upper;
c->ErrDesc.Len = sizeof(*c->err_info);
@@ -2125,50 +2287,6 @@
#ifdef CONFIG_COMPAT
-static int do_ioctl(struct scsi_device *dev, int cmd, void *arg)
-{
- int ret;
-
- lock_kernel();
- ret = hpsa_ioctl(dev, cmd, arg);
- unlock_kernel();
- return ret;
-}
-
-static int hpsa_ioctl32_passthru(struct scsi_device *dev, int cmd, void *arg);
-static int hpsa_ioctl32_big_passthru(struct scsi_device *dev,
- int cmd, void *arg);
-
-static int hpsa_compat_ioctl(struct scsi_device *dev, int cmd, void *arg)
-{
- switch (cmd) {
- case CCISS_GETPCIINFO:
- case CCISS_GETINTINFO:
- case CCISS_SETINTINFO:
- case CCISS_GETNODENAME:
- case CCISS_SETNODENAME:
- case CCISS_GETHEARTBEAT:
- case CCISS_GETBUSTYPES:
- case CCISS_GETFIRMVER:
- case CCISS_GETDRIVVER:
- case CCISS_REVALIDVOLS:
- case CCISS_DEREGDISK:
- case CCISS_REGNEWDISK:
- case CCISS_REGNEWD:
- case CCISS_RESCANDISK:
- case CCISS_GETLUNINFO:
- return do_ioctl(dev, cmd, arg);
-
- case CCISS_PASSTHRU32:
- return hpsa_ioctl32_passthru(dev, cmd, arg);
- case CCISS_BIG_PASSTHRU32:
- return hpsa_ioctl32_big_passthru(dev, cmd, arg);
-
- default:
- return -ENOIOCTLCMD;
- }
-}
-
static int hpsa_ioctl32_passthru(struct scsi_device *dev, int cmd, void *arg)
{
IOCTL32_Command_struct __user *arg32 =
@@ -2193,7 +2311,7 @@
if (err)
return -EFAULT;
- err = do_ioctl(dev, CCISS_PASSTHRU, (void *)p);
+ err = hpsa_ioctl(dev, CCISS_PASSTHRU, (void *)p);
if (err)
return err;
err |= copy_in_user(&arg32->error_info, &p->error_info,
@@ -2230,7 +2348,7 @@
if (err)
return -EFAULT;
- err = do_ioctl(dev, CCISS_BIG_PASSTHRU, (void *)p);
+ err = hpsa_ioctl(dev, CCISS_BIG_PASSTHRU, (void *)p);
if (err)
return err;
err |= copy_in_user(&arg32->error_info, &p->error_info,
@@ -2239,6 +2357,36 @@
return -EFAULT;
return err;
}
+
+static int hpsa_compat_ioctl(struct scsi_device *dev, int cmd, void *arg)
+{
+ switch (cmd) {
+ case CCISS_GETPCIINFO:
+ case CCISS_GETINTINFO:
+ case CCISS_SETINTINFO:
+ case CCISS_GETNODENAME:
+ case CCISS_SETNODENAME:
+ case CCISS_GETHEARTBEAT:
+ case CCISS_GETBUSTYPES:
+ case CCISS_GETFIRMVER:
+ case CCISS_GETDRIVVER:
+ case CCISS_REVALIDVOLS:
+ case CCISS_DEREGDISK:
+ case CCISS_REGNEWDISK:
+ case CCISS_REGNEWD:
+ case CCISS_RESCANDISK:
+ case CCISS_GETLUNINFO:
+ return hpsa_ioctl(dev, cmd, arg);
+
+ case CCISS_PASSTHRU32:
+ return hpsa_ioctl32_passthru(dev, cmd, arg);
+ case CCISS_BIG_PASSTHRU32:
+ return hpsa_ioctl32_big_passthru(dev, cmd, arg);
+
+ default:
+ return -ENOIOCTLCMD;
+ }
+}
#endif
static int hpsa_getpciinfo_ioctl(struct ctlr_info *h, void __user *argp)
@@ -2378,8 +2526,8 @@
BYTE sg_used = 0;
int status = 0;
int i;
- __u32 left;
- __u32 sz;
+ u32 left;
+ u32 sz;
BYTE __user *data_ptr;
if (!argp)
@@ -2527,7 +2675,7 @@
case CCISS_DEREGDISK:
case CCISS_REGNEWDISK:
case CCISS_REGNEWD:
- hpsa_update_scsi_devices(h, dev->host->host_no);
+ hpsa_scan_start(h->scsi_host);
return 0;
case CCISS_GETPCIINFO:
return hpsa_getpciinfo_ioctl(h, argp);
@@ -2542,8 +2690,8 @@
}
}
-static void fill_cmd(struct CommandList *c, __u8 cmd, struct ctlr_info *h,
- void *buff, size_t size, __u8 page_code, unsigned char *scsi3addr,
+static void fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h,
+ void *buff, size_t size, u8 page_code, unsigned char *scsi3addr,
int cmd_type)
{
int pci_dir = XFER_NONE;
@@ -2710,19 +2858,20 @@
return h->access.command_completed(h);
}
-static inline int interrupt_pending(struct ctlr_info *h)
+static inline bool interrupt_pending(struct ctlr_info *h)
{
return h->access.intr_pending(h);
}
static inline long interrupt_not_for_us(struct ctlr_info *h)
{
- return ((h->access.intr_pending(h) == 0) ||
- (h->interrupts_enabled == 0));
+ return !(h->msi_vector || h->msix_vector) &&
+ ((h->access.intr_pending(h) == 0) ||
+ (h->interrupts_enabled == 0));
}
-static inline int bad_tag(struct ctlr_info *h, __u32 tag_index,
- __u32 raw_tag)
+static inline int bad_tag(struct ctlr_info *h, u32 tag_index,
+ u32 raw_tag)
{
if (unlikely(tag_index >= h->nr_cmds)) {
dev_warn(&h->pdev->dev, "bad tag 0x%08x ignored.\n", raw_tag);
@@ -2731,7 +2880,7 @@
return 0;
}
-static inline void finish_cmd(struct CommandList *c, __u32 raw_tag)
+static inline void finish_cmd(struct CommandList *c, u32 raw_tag)
{
removeQ(c);
if (likely(c->cmd_type == CMD_SCSI))
@@ -2740,42 +2889,79 @@
complete(c->waiting);
}
+static inline u32 hpsa_tag_contains_index(u32 tag)
+{
+#define DIRECT_LOOKUP_BIT 0x10
+ return tag & DIRECT_LOOKUP_BIT;
+}
+
+static inline u32 hpsa_tag_to_index(u32 tag)
+{
+#define DIRECT_LOOKUP_SHIFT 5
+ return tag >> DIRECT_LOOKUP_SHIFT;
+}
+
+static inline u32 hpsa_tag_discard_error_bits(u32 tag)
+{
+#define HPSA_ERROR_BITS 0x03
+ return tag & ~HPSA_ERROR_BITS;
+}
+
+/* process completion of an indexed ("direct lookup") command */
+static inline u32 process_indexed_cmd(struct ctlr_info *h,
+ u32 raw_tag)
+{
+ u32 tag_index;
+ struct CommandList *c;
+
+ tag_index = hpsa_tag_to_index(raw_tag);
+ if (bad_tag(h, tag_index, raw_tag))
+ return next_command(h);
+ c = h->cmd_pool + tag_index;
+ finish_cmd(c, raw_tag);
+ return next_command(h);
+}
+
+/* process completion of a non-indexed command */
+static inline u32 process_nonindexed_cmd(struct ctlr_info *h,
+ u32 raw_tag)
+{
+ u32 tag;
+ struct CommandList *c = NULL;
+ struct hlist_node *tmp;
+
+ tag = hpsa_tag_discard_error_bits(raw_tag);
+ hlist_for_each_entry(c, tmp, &h->cmpQ, list) {
+ if ((c->busaddr & 0xFFFFFFE0) == (tag & 0xFFFFFFE0)) {
+ finish_cmd(c, raw_tag);
+ return next_command(h);
+ }
+ }
+ bad_tag(h, h->nr_cmds + 1, raw_tag);
+ return next_command(h);
+}
+
static irqreturn_t do_hpsa_intr(int irq, void *dev_id)
{
struct ctlr_info *h = dev_id;
- struct CommandList *c;
unsigned long flags;
- __u32 raw_tag, tag, tag_index;
- struct hlist_node *tmp;
+ u32 raw_tag;
if (interrupt_not_for_us(h))
return IRQ_NONE;
spin_lock_irqsave(&h->lock, flags);
- while (interrupt_pending(h)) {
- while ((raw_tag = get_next_completion(h)) != FIFO_EMPTY) {
- if (likely(HPSA_TAG_CONTAINS_INDEX(raw_tag))) {
- tag_index = HPSA_TAG_TO_INDEX(raw_tag);
- if (bad_tag(h, tag_index, raw_tag))
- return IRQ_HANDLED;
- c = h->cmd_pool + tag_index;
- finish_cmd(c, raw_tag);
- continue;
- }
- tag = HPSA_TAG_DISCARD_ERROR_BITS(raw_tag);
- c = NULL;
- hlist_for_each_entry(c, tmp, &h->cmpQ, list) {
- if (c->busaddr == tag) {
- finish_cmd(c, raw_tag);
- break;
- }
- }
- }
+ raw_tag = get_next_completion(h);
+ while (raw_tag != FIFO_EMPTY) {
+ if (hpsa_tag_contains_index(raw_tag))
+ raw_tag = process_indexed_cmd(h, raw_tag);
+ else
+ raw_tag = process_nonindexed_cmd(h, raw_tag);
}
spin_unlock_irqrestore(&h->lock, flags);
return IRQ_HANDLED;
}
-/* Send a message CDB to the firmware. */
+/* Send a message CDB to the firmwart. */
static __devinit int hpsa_message(struct pci_dev *pdev, unsigned char opcode,
unsigned char type)
{
@@ -2841,7 +3027,7 @@
for (i = 0; i < HPSA_MSG_SEND_RETRY_LIMIT; i++) {
tag = readl(vaddr + SA5_REPLY_PORT_OFFSET);
- if (HPSA_TAG_DISCARD_ERROR_BITS(tag) == paddr32)
+ if (hpsa_tag_discard_error_bits(tag) == paddr32)
break;
msleep(HPSA_MSG_SEND_RETRY_INTERVAL_MSECS);
}
@@ -3063,7 +3249,7 @@
*/
static void __devinit hpsa_interrupt_mode(struct ctlr_info *h,
- struct pci_dev *pdev, __u32 board_id)
+ struct pci_dev *pdev, u32 board_id)
{
#ifdef CONFIG_PCI_MSI
int err;
@@ -3107,22 +3293,22 @@
default_int_mode:
#endif /* CONFIG_PCI_MSI */
/* if we get here we're going to use the default interrupt mode */
- h->intr[SIMPLE_MODE_INT] = pdev->irq;
- return;
+ h->intr[PERF_MODE_INT] = pdev->irq;
}
static int hpsa_pci_init(struct ctlr_info *h, struct pci_dev *pdev)
{
ushort subsystem_vendor_id, subsystem_device_id, command;
- __u32 board_id, scratchpad = 0;
- __u64 cfg_offset;
- __u32 cfg_base_addr;
- __u64 cfg_base_addr_index;
+ u32 board_id, scratchpad = 0;
+ u64 cfg_offset;
+ u32 cfg_base_addr;
+ u64 cfg_base_addr_index;
+ u32 trans_offset;
int i, prod_index, err;
subsystem_vendor_id = pdev->subsystem_vendor;
subsystem_device_id = pdev->subsystem_device;
- board_id = (((__u32) (subsystem_device_id << 16) & 0xffff0000) |
+ board_id = (((u32) (subsystem_device_id << 16) & 0xffff0000) |
subsystem_vendor_id);
for (i = 0; i < ARRAY_SIZE(products); i++)
@@ -3199,7 +3385,7 @@
/* get the address index number */
cfg_base_addr = readl(h->vaddr + SA5_CTCFG_OFFSET);
- cfg_base_addr &= (__u32) 0x0000ffff;
+ cfg_base_addr &= (u32) 0x0000ffff;
cfg_base_addr_index = find_PCI_BAR_index(pdev, cfg_base_addr);
if (cfg_base_addr_index == -1) {
dev_warn(&pdev->dev, "cannot find cfg_base_addr_index\n");
@@ -3211,11 +3397,14 @@
h->cfgtable = remap_pci_mem(pci_resource_start(pdev,
cfg_base_addr_index) + cfg_offset,
sizeof(h->cfgtable));
+ /* Find performant mode table. */
+ trans_offset = readl(&(h->cfgtable->TransMethodOffset));
+ h->transtable = remap_pci_mem(pci_resource_start(pdev,
+ cfg_base_addr_index)+cfg_offset+trans_offset,
+ sizeof(*h->transtable));
+
h->board_id = board_id;
-
- /* Query controller for max supported commands: */
- h->max_commands = readl(&(h->cfgtable->CmdsOutMax));
-
+ h->max_commands = readl(&(h->cfgtable->MaxPerformantModeCommands));
h->product_name = products[prod_index].product_name;
h->access = *(products[prod_index].access);
/* Allow room for some ioctls */
@@ -3232,7 +3421,7 @@
#ifdef CONFIG_X86
{
/* Need to enable prefetch in the SCSI core for 6400 in x86 */
- __u32 prefetch;
+ u32 prefetch;
prefetch = readl(&(h->cfgtable->SCSI_Prefetch));
prefetch |= 0x100;
writel(prefetch, &(h->cfgtable->SCSI_Prefetch));
@@ -3244,7 +3433,7 @@
* physical memory.
*/
if (board_id == 0x3225103C) {
- __u32 dma_prefetch;
+ u32 dma_prefetch;
dma_prefetch = readl(h->vaddr + I2O_DMA1_CFG);
dma_prefetch |= 0x8000;
writel(dma_prefetch, h->vaddr + I2O_DMA1_CFG);
@@ -3286,10 +3475,26 @@
return err;
}
+static void __devinit hpsa_hba_inquiry(struct ctlr_info *h)
+{
+ int rc;
+
+#define HBA_INQUIRY_BYTE_COUNT 64
+ h->hba_inquiry_data = kmalloc(HBA_INQUIRY_BYTE_COUNT, GFP_KERNEL);
+ if (!h->hba_inquiry_data)
+ return;
+ rc = hpsa_scsi_do_inquiry(h, RAID_CTLR_LUNID, 0,
+ h->hba_inquiry_data, HBA_INQUIRY_BYTE_COUNT);
+ if (rc != 0) {
+ kfree(h->hba_inquiry_data);
+ h->hba_inquiry_data = NULL;
+ }
+}
+
static int __devinit hpsa_init_one(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
- int i;
+ int i, rc;
int dac;
struct ctlr_info *h;
@@ -3314,17 +3519,23 @@
}
}
- BUILD_BUG_ON(sizeof(struct CommandList) % 8);
+ /* Command structures must be aligned on a 32-byte boundary because
+ * the 5 lower bits of the address are used by the hardware. and by
+ * the driver. See comments in hpsa.h for more info.
+ */
+#define COMMANDLIST_ALIGNMENT 32
+ BUILD_BUG_ON(sizeof(struct CommandList) % COMMANDLIST_ALIGNMENT);
h = kzalloc(sizeof(*h), GFP_KERNEL);
if (!h)
- return -1;
+ return -ENOMEM;
h->busy_initializing = 1;
INIT_HLIST_HEAD(&h->cmpQ);
INIT_HLIST_HEAD(&h->reqQ);
mutex_init(&h->busy_shutting_down);
init_completion(&h->scan_wait);
- if (hpsa_pci_init(h, pdev) != 0)
+ rc = hpsa_pci_init(h, pdev);
+ if (rc != 0)
goto clean1;
sprintf(h->devname, "hpsa%d", number_of_controllers);
@@ -3333,27 +3544,32 @@
h->pdev = pdev;
/* configure PCI DMA stuff */
- if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64)))
+ rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(64));
+ if (rc == 0) {
dac = 1;
- else if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32)))
- dac = 0;
- else {
- dev_err(&pdev->dev, "no suitable DMA available\n");
- goto clean1;
+ } else {
+ rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (rc == 0) {
+ dac = 0;
+ } else {
+ dev_err(&pdev->dev, "no suitable DMA available\n");
+ goto clean1;
+ }
}
/* make sure the board interrupts are off */
h->access.set_intr_mask(h, HPSA_INTR_OFF);
- if (request_irq(h->intr[SIMPLE_MODE_INT], do_hpsa_intr,
- IRQF_DISABLED | IRQF_SHARED, h->devname, h)) {
+ rc = request_irq(h->intr[PERF_MODE_INT], do_hpsa_intr,
+ IRQF_DISABLED, h->devname, h);
+ if (rc) {
dev_err(&pdev->dev, "unable to get irq %d for %s\n",
- h->intr[SIMPLE_MODE_INT], h->devname);
+ h->intr[PERF_MODE_INT], h->devname);
goto clean2;
}
- dev_info(&pdev->dev, "%s: <0x%x> at PCI %s IRQ %d%s using DAC\n",
- h->devname, pdev->device, pci_name(pdev),
- h->intr[SIMPLE_MODE_INT], dac ? "" : " not");
+ dev_info(&pdev->dev, "%s: <0x%x> at IRQ %d%s using DAC\n",
+ h->devname, pdev->device,
+ h->intr[PERF_MODE_INT], dac ? "" : " not");
h->cmd_pool_bits =
kmalloc(((h->nr_cmds + BITS_PER_LONG -
@@ -3368,9 +3584,13 @@
|| (h->cmd_pool == NULL)
|| (h->errinfo_pool == NULL)) {
dev_err(&pdev->dev, "out of memory");
+ rc = -ENOMEM;
goto clean4;
}
spin_lock_init(&h->lock);
+ spin_lock_init(&h->scan_lock);
+ init_waitqueue_head(&h->scan_wait_queue);
+ h->scan_finished = 1; /* no scan currently in progress */
pci_set_drvdata(pdev, h);
memset(h->cmd_pool_bits, 0,
@@ -3382,6 +3602,8 @@
/* Turn the interrupts on so we can service requests */
h->access.set_intr_mask(h, HPSA_INTR_ON);
+ hpsa_put_ctlr_into_performant_mode(h);
+ hpsa_hba_inquiry(h);
hpsa_register_scsi(h); /* hook ourselves into SCSI subsystem */
h->busy_initializing = 0;
return 1;
@@ -3397,12 +3619,12 @@
h->nr_cmds * sizeof(struct ErrorInfo),
h->errinfo_pool,
h->errinfo_pool_dhandle);
- free_irq(h->intr[SIMPLE_MODE_INT], h);
+ free_irq(h->intr[PERF_MODE_INT], h);
clean2:
clean1:
h->busy_initializing = 0;
kfree(h);
- return -1;
+ return rc;
}
static void hpsa_flush_cache(struct ctlr_info *h)
@@ -3441,7 +3663,7 @@
*/
hpsa_flush_cache(h);
h->access.set_intr_mask(h, HPSA_INTR_OFF);
- free_irq(h->intr[2], h);
+ free_irq(h->intr[PERF_MODE_INT], h);
#ifdef CONFIG_PCI_MSI
if (h->msix_vector)
pci_disable_msix(h->pdev);
@@ -3470,7 +3692,11 @@
pci_free_consistent(h->pdev,
h->nr_cmds * sizeof(struct ErrorInfo),
h->errinfo_pool, h->errinfo_pool_dhandle);
+ pci_free_consistent(h->pdev, h->reply_pool_size,
+ h->reply_pool, h->reply_pool_dhandle);
kfree(h->cmd_pool_bits);
+ kfree(h->blockFetchTable);
+ kfree(h->hba_inquiry_data);
/*
* Deliberately omit pci_disable_device(): it does something nasty to
* Smart Array controllers that pci_enable_device does not undo
@@ -3502,6 +3728,129 @@
.resume = hpsa_resume,
};
+/* Fill in bucket_map[], given nsgs (the max number of
+ * scatter gather elements supported) and bucket[],
+ * which is an array of 8 integers. The bucket[] array
+ * contains 8 different DMA transfer sizes (in 16
+ * byte increments) which the controller uses to fetch
+ * commands. This function fills in bucket_map[], which
+ * maps a given number of scatter gather elements to one of
+ * the 8 DMA transfer sizes. The point of it is to allow the
+ * controller to only do as much DMA as needed to fetch the
+ * command, with the DMA transfer size encoded in the lower
+ * bits of the command address.
+ */
+static void calc_bucket_map(int bucket[], int num_buckets,
+ int nsgs, int *bucket_map)
+{
+ int i, j, b, size;
+
+ /* even a command with 0 SGs requires 4 blocks */
+#define MINIMUM_TRANSFER_BLOCKS 4
+#define NUM_BUCKETS 8
+ /* Note, bucket_map must have nsgs+1 entries. */
+ for (i = 0; i <= nsgs; i++) {
+ /* Compute size of a command with i SG entries */
+ size = i + MINIMUM_TRANSFER_BLOCKS;
+ b = num_buckets; /* Assume the biggest bucket */
+ /* Find the bucket that is just big enough */
+ for (j = 0; j < 8; j++) {
+ if (bucket[j] >= size) {
+ b = j;
+ break;
+ }
+ }
+ /* for a command with i SG entries, use bucket b. */
+ bucket_map[i] = b;
+ }
+}
+
+static void hpsa_put_ctlr_into_performant_mode(struct ctlr_info *h)
+{
+ u32 trans_support;
+ u64 trans_offset;
+ /* 5 = 1 s/g entry or 4k
+ * 6 = 2 s/g entry or 8k
+ * 8 = 4 s/g entry or 16k
+ * 10 = 6 s/g entry or 24k
+ */
+ int bft[8] = {5, 6, 8, 10, 12, 20, 28, 35}; /* for scatter/gathers */
+ int i = 0;
+ int l = 0;
+ unsigned long register_value;
+
+ trans_support = readl(&(h->cfgtable->TransportSupport));
+ if (!(trans_support & PERFORMANT_MODE))
+ return;
+
+ h->max_commands = readl(&(h->cfgtable->MaxPerformantModeCommands));
+ h->max_sg_entries = 32;
+ /* Performant mode ring buffer and supporting data structures */
+ h->reply_pool_size = h->max_commands * sizeof(u64);
+ h->reply_pool = pci_alloc_consistent(h->pdev, h->reply_pool_size,
+ &(h->reply_pool_dhandle));
+
+ /* Need a block fetch table for performant mode */
+ h->blockFetchTable = kmalloc(((h->max_sg_entries+1) *
+ sizeof(u32)), GFP_KERNEL);
+
+ if ((h->reply_pool == NULL)
+ || (h->blockFetchTable == NULL))
+ goto clean_up;
+
+ h->reply_pool_wraparound = 1; /* spec: init to 1 */
+
+ /* Controller spec: zero out this buffer. */
+ memset(h->reply_pool, 0, h->reply_pool_size);
+ h->reply_pool_head = h->reply_pool;
+
+ trans_offset = readl(&(h->cfgtable->TransMethodOffset));
+ bft[7] = h->max_sg_entries + 4;
+ calc_bucket_map(bft, ARRAY_SIZE(bft), 32, h->blockFetchTable);
+ for (i = 0; i < 8; i++)
+ writel(bft[i], &h->transtable->BlockFetch[i]);
+
+ /* size of controller ring buffer */
+ writel(h->max_commands, &h->transtable->RepQSize);
+ writel(1, &h->transtable->RepQCount);
+ writel(0, &h->transtable->RepQCtrAddrLow32);
+ writel(0, &h->transtable->RepQCtrAddrHigh32);
+ writel(h->reply_pool_dhandle, &h->transtable->RepQAddr0Low32);
+ writel(0, &h->transtable->RepQAddr0High32);
+ writel(CFGTBL_Trans_Performant,
+ &(h->cfgtable->HostWrite.TransportRequest));
+ writel(CFGTBL_ChangeReq, h->vaddr + SA5_DOORBELL);
+ /* under certain very rare conditions, this can take awhile.
+ * (e.g.: hot replace a failed 144GB drive in a RAID 5 set right
+ * as we enter this code.) */
+ for (l = 0; l < MAX_CONFIG_WAIT; l++) {
+ register_value = readl(h->vaddr + SA5_DOORBELL);
+ if (!(register_value & CFGTBL_ChangeReq))
+ break;
+ /* delay and try again */
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(10);
+ }
+ register_value = readl(&(h->cfgtable->TransportActive));
+ if (!(register_value & CFGTBL_Trans_Performant)) {
+ dev_warn(&h->pdev->dev, "unable to get board into"
+ " performant mode\n");
+ return;
+ }
+
+ /* Change the access methods to the performant access methods */
+ h->access = SA5_performant_access;
+ h->transMethod = CFGTBL_Trans_Performant;
+
+ return;
+
+clean_up:
+ if (h->reply_pool)
+ pci_free_consistent(h->pdev, h->reply_pool_size,
+ h->reply_pool, h->reply_pool_dhandle);
+ kfree(h->blockFetchTable);
+}
+
/*
* This is it. Register the PCI driver information for the cards we control
* the OS will call our registered routines when it finds one of our cards.
diff --git a/drivers/scsi/hpsa.h b/drivers/scsi/hpsa.h
index 6bd1949..a0502b3 100644
--- a/drivers/scsi/hpsa.h
+++ b/drivers/scsi/hpsa.h
@@ -33,7 +33,7 @@
struct CommandList *c);
void (*set_intr_mask)(struct ctlr_info *h, unsigned long val);
unsigned long (*fifo_full)(struct ctlr_info *h);
- unsigned long (*intr_pending)(struct ctlr_info *h);
+ bool (*intr_pending)(struct ctlr_info *h);
unsigned long (*command_completed)(struct ctlr_info *h);
};
@@ -55,19 +55,20 @@
char *product_name;
char firm_ver[4]; /* Firmware version */
struct pci_dev *pdev;
- __u32 board_id;
+ u32 board_id;
void __iomem *vaddr;
unsigned long paddr;
int nr_cmds; /* Number of commands allowed on this controller */
struct CfgTable __iomem *cfgtable;
+ int max_sg_entries;
int interrupts_enabled;
int major;
int max_commands;
int commands_outstanding;
int max_outstanding; /* Debug */
int usage_count; /* number of opens all all minor devices */
-# define DOORBELL_INT 0
-# define PERF_MODE_INT 1
+# define PERF_MODE_INT 0
+# define DOORBELL_INT 1
# define SIMPLE_MODE_INT 2
# define MEMQ_MODE_INT 3
unsigned int intr[4];
@@ -93,6 +94,9 @@
int nr_frees;
int busy_initializing;
int busy_scanning;
+ int scan_finished;
+ spinlock_t scan_lock;
+ wait_queue_head_t scan_wait_queue;
struct mutex busy_shutting_down;
struct list_head scan_list;
struct completion scan_wait;
@@ -102,6 +106,24 @@
int ndevices; /* number of used elements in .dev[] array. */
#define HPSA_MAX_SCSI_DEVS_PER_HBA 256
struct hpsa_scsi_dev_t *dev[HPSA_MAX_SCSI_DEVS_PER_HBA];
+ /*
+ * Performant mode tables.
+ */
+ u32 trans_support;
+ u32 trans_offset;
+ struct TransTable_struct *transtable;
+ unsigned long transMethod;
+
+ /*
+ * Performant mode completion buffer
+ */
+ u64 *reply_pool;
+ dma_addr_t reply_pool_dhandle;
+ u64 *reply_pool_head;
+ size_t reply_pool_size;
+ unsigned char reply_pool_wraparound;
+ u32 *blockFetchTable;
+ unsigned char *hba_inquiry_data;
};
#define HPSA_ABORT_MSG 0
#define HPSA_DEVICE_RESET_MSG 1
@@ -164,9 +186,16 @@
#define HPSA_FIRMWARE_READY 0xffff0000 /* value in scratchpad register */
#define HPSA_ERROR_BIT 0x02
-#define HPSA_TAG_CONTAINS_INDEX(tag) ((tag) & 0x04)
-#define HPSA_TAG_TO_INDEX(tag) ((tag) >> 3)
-#define HPSA_TAG_DISCARD_ERROR_BITS(tag) ((tag) & ~3)
+
+/* Performant mode flags */
+#define SA5_PERF_INTR_PENDING 0x04
+#define SA5_PERF_INTR_OFF 0x05
+#define SA5_OUTDB_STATUS_PERF_BIT 0x01
+#define SA5_OUTDB_CLEAR_PERF_BIT 0x01
+#define SA5_OUTDB_CLEAR 0xA0
+#define SA5_OUTDB_CLEAR_PERF_BIT 0x01
+#define SA5_OUTDB_STATUS 0x9C
+
#define HPSA_INTR_ON 1
#define HPSA_INTR_OFF 0
@@ -176,10 +205,8 @@
static void SA5_submit_command(struct ctlr_info *h,
struct CommandList *c)
{
-#ifdef HPSA_DEBUG
- printk(KERN_WARNING "hpsa: Sending %x - down to controller\n",
- c->busaddr);
-#endif /* HPSA_DEBUG */
+ dev_dbg(&h->pdev->dev, "Sending %x, tag = %x\n", c->busaddr,
+ c->Header.Tag.lower);
writel(c->busaddr, h->vaddr + SA5_REQUEST_PORT_OFFSET);
h->commands_outstanding++;
if (h->commands_outstanding > h->max_outstanding)
@@ -202,6 +229,52 @@
h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
}
}
+
+static void SA5_performant_intr_mask(struct ctlr_info *h, unsigned long val)
+{
+ if (val) { /* turn on interrupts */
+ h->interrupts_enabled = 1;
+ writel(0, h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
+ } else {
+ h->interrupts_enabled = 0;
+ writel(SA5_PERF_INTR_OFF,
+ h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
+ }
+}
+
+static unsigned long SA5_performant_completed(struct ctlr_info *h)
+{
+ unsigned long register_value = FIFO_EMPTY;
+
+ /* flush the controller write of the reply queue by reading
+ * outbound doorbell status register.
+ */
+ register_value = readl(h->vaddr + SA5_OUTDB_STATUS);
+ /* msi auto clears the interrupt pending bit. */
+ if (!(h->msi_vector || h->msix_vector)) {
+ writel(SA5_OUTDB_CLEAR_PERF_BIT, h->vaddr + SA5_OUTDB_CLEAR);
+ /* Do a read in order to flush the write to the controller
+ * (as per spec.)
+ */
+ register_value = readl(h->vaddr + SA5_OUTDB_STATUS);
+ }
+
+ if ((*(h->reply_pool_head) & 1) == (h->reply_pool_wraparound)) {
+ register_value = *(h->reply_pool_head);
+ (h->reply_pool_head)++;
+ h->commands_outstanding--;
+ } else {
+ register_value = FIFO_EMPTY;
+ }
+ /* Check for wraparound */
+ if (h->reply_pool_head == (h->reply_pool + h->max_commands)) {
+ h->reply_pool_head = h->reply_pool;
+ h->reply_pool_wraparound ^= 1;
+ }
+
+ return register_value;
+}
+
/*
* Returns true if fifo is full.
*
@@ -228,10 +301,10 @@
#ifdef HPSA_DEBUG
if (register_value != FIFO_EMPTY)
- printk(KERN_INFO "hpsa: Read %lx back from board\n",
+ dev_dbg(&h->pdev->dev, "Read %lx back from board\n",
register_value);
else
- printk(KERN_INFO "hpsa: FIFO Empty read\n");
+ dev_dbg(&h->pdev->dev, "hpsa: FIFO Empty read\n");
#endif
return register_value;
@@ -239,18 +312,28 @@
/*
* Returns true if an interrupt is pending..
*/
-static unsigned long SA5_intr_pending(struct ctlr_info *h)
+static bool SA5_intr_pending(struct ctlr_info *h)
{
unsigned long register_value =
readl(h->vaddr + SA5_INTR_STATUS);
-#ifdef HPSA_DEBUG
- printk(KERN_INFO "hpsa: intr_pending %lx\n", register_value);
-#endif /* HPSA_DEBUG */
- if (register_value & SA5_INTR_PENDING)
- return 1;
- return 0 ;
+ dev_dbg(&h->pdev->dev, "intr_pending %lx\n", register_value);
+ return register_value & SA5_INTR_PENDING;
}
+static bool SA5_performant_intr_pending(struct ctlr_info *h)
+{
+ unsigned long register_value = readl(h->vaddr + SA5_INTR_STATUS);
+
+ if (!register_value)
+ return false;
+
+ if (h->msi_vector || h->msix_vector)
+ return true;
+
+ /* Read outbound doorbell to flush */
+ register_value = readl(h->vaddr + SA5_OUTDB_STATUS);
+ return register_value & SA5_OUTDB_STATUS_PERF_BIT;
+}
static struct access_method SA5_access = {
SA5_submit_command,
@@ -260,14 +343,19 @@
SA5_completed,
};
+static struct access_method SA5_performant_access = {
+ SA5_submit_command,
+ SA5_performant_intr_mask,
+ SA5_fifo_full,
+ SA5_performant_intr_pending,
+ SA5_performant_completed,
+};
+
struct board_type {
- __u32 board_id;
+ u32 board_id;
char *product_name;
struct access_method *access;
};
-
-/* end of old hpsa_scsi.h file */
-
#endif /* HPSA_H */
diff --git a/drivers/scsi/hpsa_cmd.h b/drivers/scsi/hpsa_cmd.h
index 12d7138..3e0abdf 100644
--- a/drivers/scsi/hpsa_cmd.h
+++ b/drivers/scsi/hpsa_cmd.h
@@ -101,19 +101,20 @@
#define CFGTBL_AccCmds 0x00000001l
#define CFGTBL_Trans_Simple 0x00000002l
+#define CFGTBL_Trans_Performant 0x00000004l
#define CFGTBL_BusType_Ultra2 0x00000001l
#define CFGTBL_BusType_Ultra3 0x00000002l
#define CFGTBL_BusType_Fibre1G 0x00000100l
#define CFGTBL_BusType_Fibre2G 0x00000200l
struct vals32 {
- __u32 lower;
- __u32 upper;
+ u32 lower;
+ u32 upper;
};
union u64bit {
struct vals32 val32;
- __u64 val;
+ u64 val;
};
/* FIXME this is a per controller value (barf!) */
@@ -126,34 +127,34 @@
#define HPSA_INQUIRY 0x12
struct InquiryData {
- __u8 data_byte[36];
+ u8 data_byte[36];
};
#define HPSA_REPORT_LOG 0xc2 /* Report Logical LUNs */
#define HPSA_REPORT_PHYS 0xc3 /* Report Physical LUNs */
struct ReportLUNdata {
- __u8 LUNListLength[4];
- __u32 reserved;
- __u8 LUN[HPSA_MAX_LUN][8];
+ u8 LUNListLength[4];
+ u32 reserved;
+ u8 LUN[HPSA_MAX_LUN][8];
};
struct ReportExtendedLUNdata {
- __u8 LUNListLength[4];
- __u8 extended_response_flag;
- __u8 reserved[3];
- __u8 LUN[HPSA_MAX_LUN][24];
+ u8 LUNListLength[4];
+ u8 extended_response_flag;
+ u8 reserved[3];
+ u8 LUN[HPSA_MAX_LUN][24];
};
struct SenseSubsystem_info {
- __u8 reserved[36];
- __u8 portname[8];
- __u8 reserved1[1108];
+ u8 reserved[36];
+ u8 portname[8];
+ u8 reserved1[1108];
};
#define HPSA_READ_CAPACITY 0x25 /* Read Capacity */
struct ReadCapdata {
- __u8 total_size[4]; /* Total size in blocks */
- __u8 block_size[4]; /* Size of blocks in bytes */
+ u8 total_size[4]; /* Total size in blocks */
+ u8 block_size[4]; /* Size of blocks in bytes */
};
#if 0
@@ -174,112 +175,131 @@
/* Command List Structure */
union SCSI3Addr {
struct {
- __u8 Dev;
- __u8 Bus:6;
- __u8 Mode:2; /* b00 */
+ u8 Dev;
+ u8 Bus:6;
+ u8 Mode:2; /* b00 */
} PeripDev;
struct {
- __u8 DevLSB;
- __u8 DevMSB:6;
- __u8 Mode:2; /* b01 */
+ u8 DevLSB;
+ u8 DevMSB:6;
+ u8 Mode:2; /* b01 */
} LogDev;
struct {
- __u8 Dev:5;
- __u8 Bus:3;
- __u8 Targ:6;
- __u8 Mode:2; /* b10 */
+ u8 Dev:5;
+ u8 Bus:3;
+ u8 Targ:6;
+ u8 Mode:2; /* b10 */
} LogUnit;
};
struct PhysDevAddr {
- __u32 TargetId:24;
- __u32 Bus:6;
- __u32 Mode:2;
+ u32 TargetId:24;
+ u32 Bus:6;
+ u32 Mode:2;
/* 2 level target device addr */
union SCSI3Addr Target[2];
};
struct LogDevAddr {
- __u32 VolId:30;
- __u32 Mode:2;
- __u8 reserved[4];
+ u32 VolId:30;
+ u32 Mode:2;
+ u8 reserved[4];
};
union LUNAddr {
- __u8 LunAddrBytes[8];
+ u8 LunAddrBytes[8];
union SCSI3Addr SCSI3Lun[4];
struct PhysDevAddr PhysDev;
struct LogDevAddr LogDev;
};
struct CommandListHeader {
- __u8 ReplyQueue;
- __u8 SGList;
- __u16 SGTotal;
+ u8 ReplyQueue;
+ u8 SGList;
+ u16 SGTotal;
struct vals32 Tag;
union LUNAddr LUN;
};
struct RequestBlock {
- __u8 CDBLen;
+ u8 CDBLen;
struct {
- __u8 Type:3;
- __u8 Attribute:3;
- __u8 Direction:2;
+ u8 Type:3;
+ u8 Attribute:3;
+ u8 Direction:2;
} Type;
- __u16 Timeout;
- __u8 CDB[16];
+ u16 Timeout;
+ u8 CDB[16];
};
struct ErrDescriptor {
struct vals32 Addr;
- __u32 Len;
+ u32 Len;
};
struct SGDescriptor {
struct vals32 Addr;
- __u32 Len;
- __u32 Ext;
+ u32 Len;
+ u32 Ext;
};
union MoreErrInfo {
struct {
- __u8 Reserved[3];
- __u8 Type;
- __u32 ErrorInfo;
+ u8 Reserved[3];
+ u8 Type;
+ u32 ErrorInfo;
} Common_Info;
struct {
- __u8 Reserved[2];
- __u8 offense_size; /* size of offending entry */
- __u8 offense_num; /* byte # of offense 0-base */
- __u32 offense_value;
+ u8 Reserved[2];
+ u8 offense_size; /* size of offending entry */
+ u8 offense_num; /* byte # of offense 0-base */
+ u32 offense_value;
} Invalid_Cmd;
};
struct ErrorInfo {
- __u8 ScsiStatus;
- __u8 SenseLen;
- __u16 CommandStatus;
- __u32 ResidualCnt;
+ u8 ScsiStatus;
+ u8 SenseLen;
+ u16 CommandStatus;
+ u32 ResidualCnt;
union MoreErrInfo MoreErrInfo;
- __u8 SenseInfo[SENSEINFOBYTES];
+ u8 SenseInfo[SENSEINFOBYTES];
};
/* Command types */
#define CMD_IOCTL_PEND 0x01
#define CMD_SCSI 0x03
-struct ctlr_info; /* defined in hpsa.h */
-/* The size of this structure needs to be divisible by 8
- * od on all architectures, because the controller uses 2
- * lower bits of the address, and the driver uses 1 lower
- * bit (3 bits total.)
+/* This structure needs to be divisible by 32 for new
+ * indexing method and performant mode.
*/
+#define PAD32 32
+#define PAD64DIFF 0
+#define USEEXTRA ((sizeof(void *) - 4)/4)
+#define PADSIZE (PAD32 + PAD64DIFF * USEEXTRA)
+
+#define DIRECT_LOOKUP_SHIFT 5
+#define DIRECT_LOOKUP_BIT 0x10
+
+#define HPSA_ERROR_BIT 0x02
+struct ctlr_info; /* defined in hpsa.h */
+/* The size of this structure needs to be divisible by 32
+ * on all architectures because low 5 bits of the addresses
+ * are used as follows:
+ *
+ * bit 0: to device, used to indicate "performant mode" command
+ * from device, indidcates error status.
+ * bit 1-3: to device, indicates block fetch table entry for
+ * reducing DMA in fetching commands from host memory.
+ * bit 4: used to indicate whether tag is "direct lookup" (index),
+ * or a bus address.
+ */
+
struct CommandList {
struct CommandListHeader Header;
struct RequestBlock Request;
struct ErrDescriptor ErrDesc;
struct SGDescriptor SG[MAXSGENTRIES];
/* information associated with the command */
- __u32 busaddr; /* physical addr of this record */
+ u32 busaddr; /* physical addr of this record */
struct ErrorInfo *err_info; /* pointer to the allocated mem */
struct ctlr_info *h;
int cmd_type;
@@ -291,35 +311,63 @@
struct completion *waiting;
int retry_count;
void *scsi_cmd;
+
+/* on 64 bit architectures, to get this to be 32-byte-aligned
+ * it so happens we need no padding, on 32 bit systems,
+ * we need 8 bytes of padding. This does that.
+ */
+#define COMMANDLIST_PAD ((8 - sizeof(long))/4 * 8)
+ u8 pad[COMMANDLIST_PAD];
+
};
/* Configuration Table Structure */
struct HostWrite {
- __u32 TransportRequest;
- __u32 Reserved;
- __u32 CoalIntDelay;
- __u32 CoalIntCount;
+ u32 TransportRequest;
+ u32 Reserved;
+ u32 CoalIntDelay;
+ u32 CoalIntCount;
};
+#define SIMPLE_MODE 0x02
+#define PERFORMANT_MODE 0x04
+#define MEMQ_MODE 0x08
+
struct CfgTable {
- __u8 Signature[4];
- __u32 SpecValence;
- __u32 TransportSupport;
- __u32 TransportActive;
- struct HostWrite HostWrite;
- __u32 CmdsOutMax;
- __u32 BusTypes;
- __u32 Reserved;
- __u8 ServerName[16];
- __u32 HeartBeat;
- __u32 SCSI_Prefetch;
+ u8 Signature[4];
+ u32 SpecValence;
+ u32 TransportSupport;
+ u32 TransportActive;
+ struct HostWrite HostWrite;
+ u32 CmdsOutMax;
+ u32 BusTypes;
+ u32 TransMethodOffset;
+ u8 ServerName[16];
+ u32 HeartBeat;
+ u32 SCSI_Prefetch;
+ u32 MaxScatterGatherElements;
+ u32 MaxLogicalUnits;
+ u32 MaxPhysicalDevices;
+ u32 MaxPhysicalDrivesPerLogicalUnit;
+ u32 MaxPerformantModeCommands;
+};
+
+#define NUM_BLOCKFETCH_ENTRIES 8
+struct TransTable_struct {
+ u32 BlockFetch[NUM_BLOCKFETCH_ENTRIES];
+ u32 RepQSize;
+ u32 RepQCount;
+ u32 RepQCtrAddrLow32;
+ u32 RepQCtrAddrHigh32;
+ u32 RepQAddr0Low32;
+ u32 RepQAddr0High32;
};
struct hpsa_pci_info {
unsigned char bus;
unsigned char dev_fn;
unsigned short domain;
- __u32 board_id;
+ u32 board_id;
};
#pragma pack()
diff --git a/drivers/scsi/ibmmca.c b/drivers/scsi/ibmmca.c
index 9c1e6a5..9a4b69d 100644
--- a/drivers/scsi/ibmmca.c
+++ b/drivers/scsi/ibmmca.c
@@ -2336,7 +2336,7 @@
char *cur = str;
int i = 1;
- while (cur && isdigit(*cur) && i <= IM_MAX_HOSTS) {
+ while (cur && isdigit(*cur) && i < IM_MAX_HOSTS) {
ints[i++] = simple_strtoul(cur, NULL, 0);
if ((cur = strchr(cur, ',')) != NULL)
cur++;
diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c
index e475b79..e3a18e0 100644
--- a/drivers/scsi/ibmvscsi/ibmvscsi.c
+++ b/drivers/scsi/ibmvscsi/ibmvscsi.c
@@ -40,7 +40,7 @@
* (CRQ), which is just a buffer of 16 byte entries in the receiver's
* Senders cannot access the buffer directly, but send messages by
* making a hypervisor call and passing in the 16 bytes. The hypervisor
- * puts the message in the next 16 byte space in round-robbin fashion,
+ * puts the message in the next 16 byte space in round-robin fashion,
* turns on the high order bit of the message (the valid bit), and
* generates an interrupt to the receiver (if interrupts are turned on.)
* The receiver just turns off the valid bit when they have copied out
diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c
index 517da3f..8a89ba9 100644
--- a/drivers/scsi/iscsi_tcp.c
+++ b/drivers/scsi/iscsi_tcp.c
@@ -584,9 +584,10 @@
struct iscsi_conn *conn = cls_conn->dd_data;
struct iscsi_tcp_conn *tcp_conn = conn->dd_data;
struct iscsi_sw_tcp_conn *tcp_sw_conn = tcp_conn->dd_data;
+ struct socket *sock = tcp_sw_conn->sock;
/* userspace may have goofed up and not bound us */
- if (!tcp_sw_conn->sock)
+ if (!sock)
return;
/*
* Make sure our recv side is stopped.
@@ -597,6 +598,11 @@
set_bit(ISCSI_SUSPEND_BIT, &conn->suspend_rx);
write_unlock_bh(&tcp_sw_conn->sock->sk->sk_callback_lock);
+ if (sock->sk->sk_sleep && waitqueue_active(sock->sk->sk_sleep)) {
+ sock->sk->sk_err = EIO;
+ wake_up_interruptible(sock->sk->sk_sleep);
+ }
+
iscsi_conn_stop(cls_conn, flag);
iscsi_sw_tcp_release_conn(conn);
}
diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c
index c28a712..703eb6a 100644
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -1919,10 +1919,11 @@
static enum blk_eh_timer_return iscsi_eh_cmd_timed_out(struct scsi_cmnd *sc)
{
enum blk_eh_timer_return rc = BLK_EH_NOT_HANDLED;
- struct iscsi_task *task = NULL;
+ struct iscsi_task *task = NULL, *running_task;
struct iscsi_cls_session *cls_session;
struct iscsi_session *session;
struct iscsi_conn *conn;
+ int i;
cls_session = starget_to_session(scsi_target(sc->device));
session = cls_session->dd_data;
@@ -1947,8 +1948,15 @@
}
task = (struct iscsi_task *)sc->SCp.ptr;
- if (!task)
+ if (!task) {
+ /*
+ * Raced with completion. Just reset timer, and let it
+ * complete normally
+ */
+ rc = BLK_EH_RESET_TIMER;
goto done;
+ }
+
/*
* If we have sent (at least queued to the network layer) a pdu or
* recvd one for the task since the last timeout ask for
@@ -1956,10 +1964,10 @@
* we can check if it is the task or connection when we send the
* nop as a ping.
*/
- if (time_after_eq(task->last_xfer, task->last_timeout)) {
+ if (time_after(task->last_xfer, task->last_timeout)) {
ISCSI_DBG_EH(session, "Command making progress. Asking "
"scsi-ml for more time to complete. "
- "Last data recv at %lu. Last timeout was at "
+ "Last data xfer at %lu. Last timeout was at "
"%lu\n.", task->last_xfer, task->last_timeout);
task->have_checked_conn = false;
rc = BLK_EH_RESET_TIMER;
@@ -1977,6 +1985,43 @@
goto done;
}
+ for (i = 0; i < conn->session->cmds_max; i++) {
+ running_task = conn->session->cmds[i];
+ if (!running_task->sc || running_task == task ||
+ running_task->state != ISCSI_TASK_RUNNING)
+ continue;
+
+ /*
+ * Only check if cmds started before this one have made
+ * progress, or this could never fail
+ */
+ if (time_after(running_task->sc->jiffies_at_alloc,
+ task->sc->jiffies_at_alloc))
+ continue;
+
+ if (time_after(running_task->last_xfer, task->last_timeout)) {
+ /*
+ * This task has not made progress, but a task
+ * started before us has transferred data since
+ * we started/last-checked. We could be queueing
+ * too many tasks or the LU is bad.
+ *
+ * If the device is bad the cmds ahead of us on
+ * other devs will complete, and this loop will
+ * eventually fail starting the scsi eh.
+ */
+ ISCSI_DBG_EH(session, "Command has not made progress "
+ "but commands ahead of it have. "
+ "Asking scsi-ml for more time to "
+ "complete. Our last xfer vs running task "
+ "last xfer %lu/%lu. Last check %lu.\n",
+ task->last_xfer, running_task->last_xfer,
+ task->last_timeout);
+ rc = BLK_EH_RESET_TIMER;
+ goto done;
+ }
+ }
+
/* Assumes nop timeout is shorter than scsi cmd timeout */
if (task->have_checked_conn)
goto done;
diff --git a/drivers/scsi/libsrp.c b/drivers/scsi/libsrp.c
index ab19b3b..2277516 100644
--- a/drivers/scsi/libsrp.c
+++ b/drivers/scsi/libsrp.c
@@ -1,5 +1,5 @@
/*
- * SCSI RDAM Protocol lib functions
+ * SCSI RDMA Protocol lib functions
*
* Copyright (C) 2006 FUJITA Tomonori <tomof@acm.org>
*
@@ -328,7 +328,7 @@
int offset, err = 0;
u8 format;
- offset = cmd->add_cdb_len * 4;
+ offset = cmd->add_cdb_len & ~3;
dir = srp_cmd_direction(cmd);
if (dir == DMA_FROM_DEVICE)
@@ -366,7 +366,7 @@
{
struct srp_direct_buf *md;
struct srp_indirect_buf *id;
- int len = 0, offset = cmd->add_cdb_len * 4;
+ int len = 0, offset = cmd->add_cdb_len & ~3;
u8 fmt;
if (dir == DMA_TO_DEVICE)
@@ -440,6 +440,6 @@
}
EXPORT_SYMBOL_GPL(srp_cmd_queue);
-MODULE_DESCRIPTION("SCSI RDAM Protocol lib functions");
+MODULE_DESCRIPTION("SCSI RDMA Protocol lib functions");
MODULE_AUTHOR("FUJITA Tomonori");
MODULE_LICENSE("GPL");
diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index 1cc23a6..84b6964 100644
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2009 Emulex. All rights reserved. *
+ * Copyright (C) 2004-2010 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* Portions Copyright (C) 2004-2005 Christoph Hellwig *
@@ -315,6 +315,9 @@
#define FC_VPORT_NEEDS_REG_VPI 0x80000 /* Needs to have its vpi registered */
#define FC_RSCN_DEFERRED 0x100000 /* A deferred RSCN being processed */
#define FC_VPORT_NEEDS_INIT_VPI 0x200000 /* Need to INIT_VPI before FDISC */
+#define FC_VPORT_CVL_RCVD 0x400000 /* VLink failed due to CVL */
+#define FC_VFI_REGISTERED 0x800000 /* VFI is registered */
+#define FC_FDISC_COMPLETED 0x1000000/* FDISC completed */
uint32_t ct_flags;
#define FC_CT_RFF_ID 0x1 /* RFF_ID accepted by switch */
@@ -448,6 +451,8 @@
uint32_t ctxt_id;
uint32_t SID;
uint32_t oxid;
+ uint32_t flags;
+#define UNSOL_VALID 0x00000001
};
struct lpfc_hba {
@@ -499,6 +504,10 @@
(struct lpfc_hba *);
void (*lpfc_stop_port)
(struct lpfc_hba *);
+ int (*lpfc_hba_init_link)
+ (struct lpfc_hba *);
+ int (*lpfc_hba_down_link)
+ (struct lpfc_hba *);
/* SLI4 specific HBA data structure */
@@ -613,6 +622,7 @@
uint32_t cfg_enable_bg;
uint32_t cfg_log_verbose;
uint32_t cfg_aer_support;
+ uint32_t cfg_suppress_link_up;
lpfc_vpd_t vpd; /* vital product data */
@@ -790,7 +800,7 @@
uint16_t vlan_id;
struct list_head fcf_conn_rec_list;
- struct mutex ct_event_mutex; /* synchronize access to ct_ev_waiters */
+ spinlock_t ct_ev_lock; /* synchronize access to ct_ev_waiters */
struct list_head ct_ev_waiters;
struct unsol_rcv_ct_ctx ct_ctx[64];
uint32_t ctx_idx;
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index 91542f7..c992e83 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -482,6 +482,41 @@
}
/**
+ * lpfc_link_state_store - Transition the link_state on an HBA port
+ * @dev: class device that is converted into a Scsi_host.
+ * @attr: device attribute, not used.
+ * @buf: one or more lpfc_polling_flags values.
+ * @count: not used.
+ *
+ * Returns:
+ * -EINVAL if the buffer is not "up" or "down"
+ * return from link state change function if non-zero
+ * length of the buf on success
+ **/
+static ssize_t
+lpfc_link_state_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
+ struct lpfc_hba *phba = vport->phba;
+
+ int status = -EINVAL;
+
+ if ((strncmp(buf, "up", sizeof("up") - 1) == 0) &&
+ (phba->link_state == LPFC_LINK_DOWN))
+ status = phba->lpfc_hba_init_link(phba);
+ else if ((strncmp(buf, "down", sizeof("down") - 1) == 0) &&
+ (phba->link_state >= LPFC_LINK_UP))
+ status = phba->lpfc_hba_down_link(phba);
+
+ if (status == 0)
+ return strlen(buf);
+ else
+ return status;
+}
+
+/**
* lpfc_num_discovered_ports_show - Return sum of mapped and unmapped vports
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
@@ -1219,7 +1254,7 @@
struct Scsi_Host *shost = class_to_shost(dev);\
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;\
struct lpfc_hba *phba = vport->phba;\
- int val = 0;\
+ uint val = 0;\
val = phba->cfg_##attr;\
return snprintf(buf, PAGE_SIZE, "%d\n",\
phba->cfg_##attr);\
@@ -1247,7 +1282,7 @@
struct Scsi_Host *shost = class_to_shost(dev);\
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;\
struct lpfc_hba *phba = vport->phba;\
- int val = 0;\
+ uint val = 0;\
val = phba->cfg_##attr;\
return snprintf(buf, PAGE_SIZE, "%#x\n",\
phba->cfg_##attr);\
@@ -1274,7 +1309,7 @@
**/
#define lpfc_param_init(attr, default, minval, maxval) \
static int \
-lpfc_##attr##_init(struct lpfc_hba *phba, int val) \
+lpfc_##attr##_init(struct lpfc_hba *phba, uint val) \
{ \
if (val >= minval && val <= maxval) {\
phba->cfg_##attr = val;\
@@ -1309,7 +1344,7 @@
**/
#define lpfc_param_set(attr, default, minval, maxval) \
static int \
-lpfc_##attr##_set(struct lpfc_hba *phba, int val) \
+lpfc_##attr##_set(struct lpfc_hba *phba, uint val) \
{ \
if (val >= minval && val <= maxval) {\
phba->cfg_##attr = val;\
@@ -1350,7 +1385,7 @@
struct Scsi_Host *shost = class_to_shost(dev);\
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;\
struct lpfc_hba *phba = vport->phba;\
- int val=0;\
+ uint val = 0;\
if (!isdigit(buf[0]))\
return -EINVAL;\
if (sscanf(buf, "%i", &val) != 1)\
@@ -1382,7 +1417,7 @@
{ \
struct Scsi_Host *shost = class_to_shost(dev);\
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;\
- int val = 0;\
+ uint val = 0;\
val = vport->cfg_##attr;\
return snprintf(buf, PAGE_SIZE, "%d\n", vport->cfg_##attr);\
}
@@ -1409,7 +1444,7 @@
{ \
struct Scsi_Host *shost = class_to_shost(dev);\
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;\
- int val = 0;\
+ uint val = 0;\
val = vport->cfg_##attr;\
return snprintf(buf, PAGE_SIZE, "%#x\n", vport->cfg_##attr);\
}
@@ -1434,7 +1469,7 @@
**/
#define lpfc_vport_param_init(attr, default, minval, maxval) \
static int \
-lpfc_##attr##_init(struct lpfc_vport *vport, int val) \
+lpfc_##attr##_init(struct lpfc_vport *vport, uint val) \
{ \
if (val >= minval && val <= maxval) {\
vport->cfg_##attr = val;\
@@ -1466,7 +1501,7 @@
**/
#define lpfc_vport_param_set(attr, default, minval, maxval) \
static int \
-lpfc_##attr##_set(struct lpfc_vport *vport, int val) \
+lpfc_##attr##_set(struct lpfc_vport *vport, uint val) \
{ \
if (val >= minval && val <= maxval) {\
vport->cfg_##attr = val;\
@@ -1502,7 +1537,7 @@
{ \
struct Scsi_Host *shost = class_to_shost(dev);\
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;\
- int val=0;\
+ uint val = 0;\
if (!isdigit(buf[0]))\
return -EINVAL;\
if (sscanf(buf, "%i", &val) != 1)\
@@ -1515,22 +1550,22 @@
#define LPFC_ATTR(name, defval, minval, maxval, desc) \
-static int lpfc_##name = defval;\
-module_param(lpfc_##name, int, 0);\
+static uint lpfc_##name = defval;\
+module_param(lpfc_##name, uint, 0);\
MODULE_PARM_DESC(lpfc_##name, desc);\
lpfc_param_init(name, defval, minval, maxval)
#define LPFC_ATTR_R(name, defval, minval, maxval, desc) \
-static int lpfc_##name = defval;\
-module_param(lpfc_##name, int, 0);\
+static uint lpfc_##name = defval;\
+module_param(lpfc_##name, uint, 0);\
MODULE_PARM_DESC(lpfc_##name, desc);\
lpfc_param_show(name)\
lpfc_param_init(name, defval, minval, maxval)\
static DEVICE_ATTR(lpfc_##name, S_IRUGO , lpfc_##name##_show, NULL)
#define LPFC_ATTR_RW(name, defval, minval, maxval, desc) \
-static int lpfc_##name = defval;\
-module_param(lpfc_##name, int, 0);\
+static uint lpfc_##name = defval;\
+module_param(lpfc_##name, uint, 0);\
MODULE_PARM_DESC(lpfc_##name, desc);\
lpfc_param_show(name)\
lpfc_param_init(name, defval, minval, maxval)\
@@ -1540,16 +1575,16 @@
lpfc_##name##_show, lpfc_##name##_store)
#define LPFC_ATTR_HEX_R(name, defval, minval, maxval, desc) \
-static int lpfc_##name = defval;\
-module_param(lpfc_##name, int, 0);\
+static uint lpfc_##name = defval;\
+module_param(lpfc_##name, uint, 0);\
MODULE_PARM_DESC(lpfc_##name, desc);\
lpfc_param_hex_show(name)\
lpfc_param_init(name, defval, minval, maxval)\
static DEVICE_ATTR(lpfc_##name, S_IRUGO , lpfc_##name##_show, NULL)
#define LPFC_ATTR_HEX_RW(name, defval, minval, maxval, desc) \
-static int lpfc_##name = defval;\
-module_param(lpfc_##name, int, 0);\
+static uint lpfc_##name = defval;\
+module_param(lpfc_##name, uint, 0);\
MODULE_PARM_DESC(lpfc_##name, desc);\
lpfc_param_hex_show(name)\
lpfc_param_init(name, defval, minval, maxval)\
@@ -1559,22 +1594,22 @@
lpfc_##name##_show, lpfc_##name##_store)
#define LPFC_VPORT_ATTR(name, defval, minval, maxval, desc) \
-static int lpfc_##name = defval;\
-module_param(lpfc_##name, int, 0);\
+static uint lpfc_##name = defval;\
+module_param(lpfc_##name, uint, 0);\
MODULE_PARM_DESC(lpfc_##name, desc);\
lpfc_vport_param_init(name, defval, minval, maxval)
#define LPFC_VPORT_ATTR_R(name, defval, minval, maxval, desc) \
-static int lpfc_##name = defval;\
-module_param(lpfc_##name, int, 0);\
+static uint lpfc_##name = defval;\
+module_param(lpfc_##name, uint, 0);\
MODULE_PARM_DESC(lpfc_##name, desc);\
lpfc_vport_param_show(name)\
lpfc_vport_param_init(name, defval, minval, maxval)\
static DEVICE_ATTR(lpfc_##name, S_IRUGO , lpfc_##name##_show, NULL)
#define LPFC_VPORT_ATTR_RW(name, defval, minval, maxval, desc) \
-static int lpfc_##name = defval;\
-module_param(lpfc_##name, int, 0);\
+static uint lpfc_##name = defval;\
+module_param(lpfc_##name, uint, 0);\
MODULE_PARM_DESC(lpfc_##name, desc);\
lpfc_vport_param_show(name)\
lpfc_vport_param_init(name, defval, minval, maxval)\
@@ -1584,16 +1619,16 @@
lpfc_##name##_show, lpfc_##name##_store)
#define LPFC_VPORT_ATTR_HEX_R(name, defval, minval, maxval, desc) \
-static int lpfc_##name = defval;\
-module_param(lpfc_##name, int, 0);\
+static uint lpfc_##name = defval;\
+module_param(lpfc_##name, uint, 0);\
MODULE_PARM_DESC(lpfc_##name, desc);\
lpfc_vport_param_hex_show(name)\
lpfc_vport_param_init(name, defval, minval, maxval)\
static DEVICE_ATTR(lpfc_##name, S_IRUGO , lpfc_##name##_show, NULL)
#define LPFC_VPORT_ATTR_HEX_RW(name, defval, minval, maxval, desc) \
-static int lpfc_##name = defval;\
-module_param(lpfc_##name, int, 0);\
+static uint lpfc_##name = defval;\
+module_param(lpfc_##name, uint, 0);\
MODULE_PARM_DESC(lpfc_##name, desc);\
lpfc_vport_param_hex_show(name)\
lpfc_vport_param_init(name, defval, minval, maxval)\
@@ -1614,7 +1649,8 @@
static DEVICE_ATTR(portnum, S_IRUGO, lpfc_vportnum_show, NULL);
static DEVICE_ATTR(fwrev, S_IRUGO, lpfc_fwrev_show, NULL);
static DEVICE_ATTR(hdw, S_IRUGO, lpfc_hdw_show, NULL);
-static DEVICE_ATTR(link_state, S_IRUGO, lpfc_link_state_show, NULL);
+static DEVICE_ATTR(link_state, S_IRUGO | S_IWUSR, lpfc_link_state_show,
+ lpfc_link_state_store);
static DEVICE_ATTR(option_rom_version, S_IRUGO,
lpfc_option_rom_version_show, NULL);
static DEVICE_ATTR(num_discovered_ports, S_IRUGO,
@@ -1897,6 +1933,15 @@
lpfc_enable_npiv_show, NULL);
/*
+# lpfc_suppress_link_up: Bring link up at initialization
+# 0x0 = bring link up (issue MBX_INIT_LINK)
+# 0x1 = do NOT bring link up at initialization(MBX_INIT_LINK)
+# 0x2 = never bring up link
+# Default value is 0.
+*/
+LPFC_ATTR_R(suppress_link_up, 0, 0, 2, "Suppress Link Up at initialization");
+
+/*
# lpfc_nodev_tmo: If set, it will hold all I/O errors on devices that disappear
# until the timer expires. Value range is [0,255]. Default value is 30.
*/
@@ -3114,12 +3159,12 @@
/*
# lpfc_use_msi: Use MSI (Message Signaled Interrupts) in systems that
# support this feature
-# 0 = MSI disabled (default)
+# 0 = MSI disabled
# 1 = MSI enabled
-# 2 = MSI-X enabled
-# Value range is [0,2]. Default value is 0.
+# 2 = MSI-X enabled (default)
+# Value range is [0,2]. Default value is 2.
*/
-LPFC_ATTR_R(use_msi, 0, 0, 2, "Use Message Signaled Interrupts (1) or "
+LPFC_ATTR_R(use_msi, 2, 0, 2, "Use Message Signaled Interrupts (1) or "
"MSI-X (2), if possible");
/*
@@ -3278,6 +3323,7 @@
&dev_attr_lpfc_prot_sg_seg_cnt,
&dev_attr_lpfc_aer_support,
&dev_attr_lpfc_aer_state_cleanup,
+ &dev_attr_lpfc_suppress_link_up,
NULL,
};
@@ -4456,7 +4502,7 @@
lpfc_hba_queue_depth_init(phba, lpfc_hba_queue_depth);
lpfc_hba_log_verbose_init(phba, lpfc_log_verbose);
lpfc_aer_support_init(phba, lpfc_aer_support);
-
+ lpfc_suppress_link_up_init(phba, lpfc_suppress_link_up);
return;
}
diff --git a/drivers/scsi/lpfc/lpfc_bsg.c b/drivers/scsi/lpfc/lpfc_bsg.c
index a5d9048..f3f1bf1 100644
--- a/drivers/scsi/lpfc/lpfc_bsg.c
+++ b/drivers/scsi/lpfc/lpfc_bsg.c
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2009 Emulex. All rights reserved. *
+ * Copyright (C) 2009-2010 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* *
@@ -21,6 +21,7 @@
#include <linux/interrupt.h>
#include <linux/mempool.h>
#include <linux/pci.h>
+#include <linux/delay.h>
#include <scsi/scsi.h>
#include <scsi/scsi_host.h>
@@ -33,6 +34,7 @@
#include "lpfc_sli.h"
#include "lpfc_sli4.h"
#include "lpfc_nl.h"
+#include "lpfc_bsg.h"
#include "lpfc_disc.h"
#include "lpfc_scsi.h"
#include "lpfc.h"
@@ -41,14 +43,183 @@
#include "lpfc_vport.h"
#include "lpfc_version.h"
+struct lpfc_bsg_event {
+ struct list_head node;
+ struct kref kref;
+ wait_queue_head_t wq;
+
+ /* Event type and waiter identifiers */
+ uint32_t type_mask;
+ uint32_t req_id;
+ uint32_t reg_id;
+
+ /* next two flags are here for the auto-delete logic */
+ unsigned long wait_time_stamp;
+ int waiting;
+
+ /* seen and not seen events */
+ struct list_head events_to_get;
+ struct list_head events_to_see;
+
+ /* job waiting for this event to finish */
+ struct fc_bsg_job *set_job;
+};
+
+struct lpfc_bsg_iocb {
+ struct lpfc_iocbq *cmdiocbq;
+ struct lpfc_iocbq *rspiocbq;
+ struct lpfc_dmabuf *bmp;
+ struct lpfc_nodelist *ndlp;
+
+ /* job waiting for this iocb to finish */
+ struct fc_bsg_job *set_job;
+};
+
+struct lpfc_bsg_mbox {
+ LPFC_MBOXQ_t *pmboxq;
+ MAILBOX_t *mb;
+
+ /* job waiting for this mbox command to finish */
+ struct fc_bsg_job *set_job;
+};
+
+#define TYPE_EVT 1
+#define TYPE_IOCB 2
+#define TYPE_MBOX 3
+struct bsg_job_data {
+ uint32_t type;
+ union {
+ struct lpfc_bsg_event *evt;
+ struct lpfc_bsg_iocb iocb;
+ struct lpfc_bsg_mbox mbox;
+ } context_un;
+};
+
+struct event_data {
+ struct list_head node;
+ uint32_t type;
+ uint32_t immed_dat;
+ void *data;
+ uint32_t len;
+};
+
+#define BUF_SZ_4K 4096
+#define SLI_CT_ELX_LOOPBACK 0x10
+
+enum ELX_LOOPBACK_CMD {
+ ELX_LOOPBACK_XRI_SETUP,
+ ELX_LOOPBACK_DATA,
+};
+
+#define ELX_LOOPBACK_HEADER_SZ \
+ (size_t)(&((struct lpfc_sli_ct_request *)NULL)->un)
+
+struct lpfc_dmabufext {
+ struct lpfc_dmabuf dma;
+ uint32_t size;
+ uint32_t flag;
+};
+
/**
- * lpfc_bsg_rport_ct - send a CT command from a bsg request
- * @job: fc_bsg_job to handle
- */
-static int
-lpfc_bsg_rport_ct(struct fc_bsg_job *job)
+ * lpfc_bsg_send_mgmt_cmd_cmp - lpfc_bsg_send_mgmt_cmd's completion handler
+ * @phba: Pointer to HBA context object.
+ * @cmdiocbq: Pointer to command iocb.
+ * @rspiocbq: Pointer to response iocb.
+ *
+ * This function is the completion handler for iocbs issued using
+ * lpfc_bsg_send_mgmt_cmd function. This function is called by the
+ * ring event handler function without any lock held. This function
+ * can be called from both worker thread context and interrupt
+ * context. This function also can be called from another thread which
+ * cleans up the SLI layer objects.
+ * This function copies the contents of the response iocb to the
+ * response iocb memory object provided by the caller of
+ * lpfc_sli_issue_iocb_wait and then wakes up the thread which
+ * sleeps for the iocb completion.
+ **/
+static void
+lpfc_bsg_send_mgmt_cmd_cmp(struct lpfc_hba *phba,
+ struct lpfc_iocbq *cmdiocbq,
+ struct lpfc_iocbq *rspiocbq)
{
- struct Scsi_Host *shost = job->shost;
+ unsigned long iflags;
+ struct bsg_job_data *dd_data;
+ struct fc_bsg_job *job;
+ IOCB_t *rsp;
+ struct lpfc_dmabuf *bmp;
+ struct lpfc_nodelist *ndlp;
+ struct lpfc_bsg_iocb *iocb;
+ unsigned long flags;
+ int rc = 0;
+
+ spin_lock_irqsave(&phba->ct_ev_lock, flags);
+ dd_data = cmdiocbq->context1;
+ if (!dd_data) {
+ spin_unlock_irqrestore(&phba->ct_ev_lock, flags);
+ return;
+ }
+
+ iocb = &dd_data->context_un.iocb;
+ job = iocb->set_job;
+ job->dd_data = NULL; /* so timeout handler does not reply */
+
+ spin_lock_irqsave(&phba->hbalock, iflags);
+ cmdiocbq->iocb_flag |= LPFC_IO_WAKE;
+ if (cmdiocbq->context2 && rspiocbq)
+ memcpy(&((struct lpfc_iocbq *)cmdiocbq->context2)->iocb,
+ &rspiocbq->iocb, sizeof(IOCB_t));
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+
+ bmp = iocb->bmp;
+ rspiocbq = iocb->rspiocbq;
+ rsp = &rspiocbq->iocb;
+ ndlp = iocb->ndlp;
+
+ pci_unmap_sg(phba->pcidev, job->request_payload.sg_list,
+ job->request_payload.sg_cnt, DMA_TO_DEVICE);
+ pci_unmap_sg(phba->pcidev, job->reply_payload.sg_list,
+ job->reply_payload.sg_cnt, DMA_FROM_DEVICE);
+
+ if (rsp->ulpStatus) {
+ if (rsp->ulpStatus == IOSTAT_LOCAL_REJECT) {
+ switch (rsp->un.ulpWord[4] & 0xff) {
+ case IOERR_SEQUENCE_TIMEOUT:
+ rc = -ETIMEDOUT;
+ break;
+ case IOERR_INVALID_RPI:
+ rc = -EFAULT;
+ break;
+ default:
+ rc = -EACCES;
+ break;
+ }
+ } else
+ rc = -EACCES;
+ } else
+ job->reply->reply_payload_rcv_len =
+ rsp->un.genreq64.bdl.bdeSize;
+
+ lpfc_mbuf_free(phba, bmp->virt, bmp->phys);
+ lpfc_sli_release_iocbq(phba, rspiocbq);
+ lpfc_sli_release_iocbq(phba, cmdiocbq);
+ lpfc_nlp_put(ndlp);
+ kfree(bmp);
+ kfree(dd_data);
+ /* make error code available to userspace */
+ job->reply->result = rc;
+ /* complete the job back to userspace */
+ job->job_done(job);
+ spin_unlock_irqrestore(&phba->ct_ev_lock, flags);
+ return;
+}
+
+/**
+ * lpfc_bsg_send_mgmt_cmd - send a CT command from a bsg request
+ * @job: fc_bsg_job to handle
+ **/
+static int
+lpfc_bsg_send_mgmt_cmd(struct fc_bsg_job *job)
+{
struct lpfc_vport *vport = (struct lpfc_vport *)job->shost->hostdata;
struct lpfc_hba *phba = vport->phba;
struct lpfc_rport_data *rdata = job->rport->dd_data;
@@ -65,57 +236,60 @@
struct scatterlist *sgel = NULL;
int numbde;
dma_addr_t busaddr;
+ struct bsg_job_data *dd_data;
+ uint32_t creg_val;
int rc = 0;
/* in case no data is transferred */
job->reply->reply_payload_rcv_len = 0;
+ /* allocate our bsg tracking structure */
+ dd_data = kmalloc(sizeof(struct bsg_job_data), GFP_KERNEL);
+ if (!dd_data) {
+ lpfc_printf_log(phba, KERN_WARNING, LOG_LIBDFC,
+ "2733 Failed allocation of dd_data\n");
+ rc = -ENOMEM;
+ goto no_dd_data;
+ }
+
if (!lpfc_nlp_get(ndlp)) {
- job->reply->result = -ENODEV;
- return 0;
+ rc = -ENODEV;
+ goto no_ndlp;
+ }
+
+ bmp = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
+ if (!bmp) {
+ rc = -ENOMEM;
+ goto free_ndlp;
}
if (ndlp->nlp_flag & NLP_ELS_SND_MASK) {
rc = -ENODEV;
- goto free_ndlp_exit;
+ goto free_bmp;
}
- spin_lock_irq(shost->host_lock);
cmdiocbq = lpfc_sli_get_iocbq(phba);
if (!cmdiocbq) {
rc = -ENOMEM;
- spin_unlock_irq(shost->host_lock);
- goto free_ndlp_exit;
+ goto free_bmp;
}
- cmd = &cmdiocbq->iocb;
+ cmd = &cmdiocbq->iocb;
rspiocbq = lpfc_sli_get_iocbq(phba);
if (!rspiocbq) {
rc = -ENOMEM;
goto free_cmdiocbq;
}
- spin_unlock_irq(shost->host_lock);
rsp = &rspiocbq->iocb;
-
- bmp = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
- if (!bmp) {
- rc = -ENOMEM;
- spin_lock_irq(shost->host_lock);
- goto free_rspiocbq;
- }
-
- spin_lock_irq(shost->host_lock);
bmp->virt = lpfc_mbuf_alloc(phba, 0, &bmp->phys);
if (!bmp->virt) {
rc = -ENOMEM;
- goto free_bmp;
+ goto free_rspiocbq;
}
- spin_unlock_irq(shost->host_lock);
INIT_LIST_HEAD(&bmp->list);
bpl = (struct ulp_bde64 *) bmp->virt;
-
request_nseg = pci_map_sg(phba->pcidev, job->request_payload.sg_list,
job->request_payload.sg_cnt, DMA_TO_DEVICE);
for_each_sg(job->request_payload.sg_list, sgel, request_nseg, numbde) {
@@ -157,78 +331,152 @@
cmd->ulpContext = ndlp->nlp_rpi;
cmd->ulpOwner = OWN_CHIP;
cmdiocbq->vport = phba->pport;
- cmdiocbq->context1 = NULL;
- cmdiocbq->context2 = NULL;
+ cmdiocbq->context3 = bmp;
cmdiocbq->iocb_flag |= LPFC_IO_LIBDFC;
-
timeout = phba->fc_ratov * 2;
- job->dd_data = cmdiocbq;
+ cmd->ulpTimeout = timeout;
- rc = lpfc_sli_issue_iocb_wait(phba, LPFC_ELS_RING, cmdiocbq, rspiocbq,
- timeout + LPFC_DRVR_TIMEOUT);
+ cmdiocbq->iocb_cmpl = lpfc_bsg_send_mgmt_cmd_cmp;
+ cmdiocbq->context1 = dd_data;
+ cmdiocbq->context2 = rspiocbq;
+ dd_data->type = TYPE_IOCB;
+ dd_data->context_un.iocb.cmdiocbq = cmdiocbq;
+ dd_data->context_un.iocb.rspiocbq = rspiocbq;
+ dd_data->context_un.iocb.set_job = job;
+ dd_data->context_un.iocb.bmp = bmp;
+ dd_data->context_un.iocb.ndlp = ndlp;
- if (rc != IOCB_TIMEDOUT) {
- pci_unmap_sg(phba->pcidev, job->request_payload.sg_list,
- job->request_payload.sg_cnt, DMA_TO_DEVICE);
- pci_unmap_sg(phba->pcidev, job->reply_payload.sg_list,
- job->reply_payload.sg_cnt, DMA_FROM_DEVICE);
+ if (phba->cfg_poll & DISABLE_FCP_RING_INT) {
+ creg_val = readl(phba->HCregaddr);
+ creg_val |= (HC_R0INT_ENA << LPFC_FCP_RING);
+ writel(creg_val, phba->HCregaddr);
+ readl(phba->HCregaddr); /* flush */
}
- if (rc == IOCB_TIMEDOUT) {
- lpfc_sli_release_iocbq(phba, rspiocbq);
- rc = -EACCES;
- goto free_ndlp_exit;
- }
+ rc = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, cmdiocbq, 0);
- if (rc != IOCB_SUCCESS) {
- rc = -EACCES;
- goto free_outdmp;
- }
+ if (rc == IOCB_SUCCESS)
+ return 0; /* done for now */
- if (rsp->ulpStatus) {
- if (rsp->ulpStatus == IOSTAT_LOCAL_REJECT) {
- switch (rsp->un.ulpWord[4] & 0xff) {
- case IOERR_SEQUENCE_TIMEOUT:
- rc = -ETIMEDOUT;
- break;
- case IOERR_INVALID_RPI:
- rc = -EFAULT;
- break;
- default:
- rc = -EACCES;
- break;
- }
- goto free_outdmp;
- }
- } else
- job->reply->reply_payload_rcv_len =
- rsp->un.genreq64.bdl.bdeSize;
+ /* iocb failed so cleanup */
+ pci_unmap_sg(phba->pcidev, job->request_payload.sg_list,
+ job->request_payload.sg_cnt, DMA_TO_DEVICE);
+ pci_unmap_sg(phba->pcidev, job->reply_payload.sg_list,
+ job->reply_payload.sg_cnt, DMA_FROM_DEVICE);
-free_outdmp:
- spin_lock_irq(shost->host_lock);
lpfc_mbuf_free(phba, bmp->virt, bmp->phys);
-free_bmp:
- kfree(bmp);
+
free_rspiocbq:
lpfc_sli_release_iocbq(phba, rspiocbq);
free_cmdiocbq:
lpfc_sli_release_iocbq(phba, cmdiocbq);
- spin_unlock_irq(shost->host_lock);
-free_ndlp_exit:
+free_bmp:
+ kfree(bmp);
+free_ndlp:
lpfc_nlp_put(ndlp);
-
+no_ndlp:
+ kfree(dd_data);
+no_dd_data:
/* make error code available to userspace */
job->reply->result = rc;
+ job->dd_data = NULL;
+ return rc;
+}
+
+/**
+ * lpfc_bsg_rport_els_cmp - lpfc_bsg_rport_els's completion handler
+ * @phba: Pointer to HBA context object.
+ * @cmdiocbq: Pointer to command iocb.
+ * @rspiocbq: Pointer to response iocb.
+ *
+ * This function is the completion handler for iocbs issued using
+ * lpfc_bsg_rport_els_cmp function. This function is called by the
+ * ring event handler function without any lock held. This function
+ * can be called from both worker thread context and interrupt
+ * context. This function also can be called from other thread which
+ * cleans up the SLI layer objects.
+ * This function copies the contents of the response iocb to the
+ * response iocb memory object provided by the caller of
+ * lpfc_sli_issue_iocb_wait and then wakes up the thread which
+ * sleeps for the iocb completion.
+ **/
+static void
+lpfc_bsg_rport_els_cmp(struct lpfc_hba *phba,
+ struct lpfc_iocbq *cmdiocbq,
+ struct lpfc_iocbq *rspiocbq)
+{
+ struct bsg_job_data *dd_data;
+ struct fc_bsg_job *job;
+ IOCB_t *rsp;
+ struct lpfc_nodelist *ndlp;
+ struct lpfc_dmabuf *pbuflist = NULL;
+ struct fc_bsg_ctels_reply *els_reply;
+ uint8_t *rjt_data;
+ unsigned long flags;
+ int rc = 0;
+
+ spin_lock_irqsave(&phba->ct_ev_lock, flags);
+ dd_data = cmdiocbq->context1;
+ /* normal completion and timeout crossed paths, already done */
+ if (!dd_data) {
+ spin_unlock_irqrestore(&phba->hbalock, flags);
+ return;
+ }
+
+ cmdiocbq->iocb_flag |= LPFC_IO_WAKE;
+ if (cmdiocbq->context2 && rspiocbq)
+ memcpy(&((struct lpfc_iocbq *)cmdiocbq->context2)->iocb,
+ &rspiocbq->iocb, sizeof(IOCB_t));
+
+ job = dd_data->context_un.iocb.set_job;
+ cmdiocbq = dd_data->context_un.iocb.cmdiocbq;
+ rspiocbq = dd_data->context_un.iocb.rspiocbq;
+ rsp = &rspiocbq->iocb;
+ ndlp = dd_data->context_un.iocb.ndlp;
+
+ pci_unmap_sg(phba->pcidev, job->request_payload.sg_list,
+ job->request_payload.sg_cnt, DMA_TO_DEVICE);
+ pci_unmap_sg(phba->pcidev, job->reply_payload.sg_list,
+ job->reply_payload.sg_cnt, DMA_FROM_DEVICE);
+
+ if (job->reply->result == -EAGAIN)
+ rc = -EAGAIN;
+ else if (rsp->ulpStatus == IOSTAT_SUCCESS)
+ job->reply->reply_payload_rcv_len =
+ rsp->un.elsreq64.bdl.bdeSize;
+ else if (rsp->ulpStatus == IOSTAT_LS_RJT) {
+ job->reply->reply_payload_rcv_len =
+ sizeof(struct fc_bsg_ctels_reply);
+ /* LS_RJT data returned in word 4 */
+ rjt_data = (uint8_t *)&rsp->un.ulpWord[4];
+ els_reply = &job->reply->reply_data.ctels_reply;
+ els_reply->status = FC_CTELS_STATUS_REJECT;
+ els_reply->rjt_data.action = rjt_data[3];
+ els_reply->rjt_data.reason_code = rjt_data[2];
+ els_reply->rjt_data.reason_explanation = rjt_data[1];
+ els_reply->rjt_data.vendor_unique = rjt_data[0];
+ } else
+ rc = -EIO;
+
+ pbuflist = (struct lpfc_dmabuf *) cmdiocbq->context3;
+ lpfc_mbuf_free(phba, pbuflist->virt, pbuflist->phys);
+ lpfc_sli_release_iocbq(phba, rspiocbq);
+ lpfc_sli_release_iocbq(phba, cmdiocbq);
+ lpfc_nlp_put(ndlp);
+ kfree(dd_data);
+ /* make error code available to userspace */
+ job->reply->result = rc;
+ job->dd_data = NULL;
/* complete the job back to userspace */
job->job_done(job);
-
- return 0;
+ spin_unlock_irqrestore(&phba->ct_ev_lock, flags);
+ return;
}
/**
* lpfc_bsg_rport_els - send an ELS command from a bsg request
* @job: fc_bsg_job to handle
- */
+ **/
static int
lpfc_bsg_rport_els(struct fc_bsg_job *job)
{
@@ -236,7 +484,6 @@
struct lpfc_hba *phba = vport->phba;
struct lpfc_rport_data *rdata = job->rport->dd_data;
struct lpfc_nodelist *ndlp = rdata->pnode;
-
uint32_t elscmd;
uint32_t cmdsize;
uint32_t rspsize;
@@ -248,20 +495,30 @@
struct lpfc_dmabuf *prsp;
struct lpfc_dmabuf *pbuflist = NULL;
struct ulp_bde64 *bpl;
- int iocb_status;
int request_nseg;
int reply_nseg;
struct scatterlist *sgel = NULL;
int numbde;
dma_addr_t busaddr;
+ struct bsg_job_data *dd_data;
+ uint32_t creg_val;
int rc = 0;
/* in case no data is transferred */
job->reply->reply_payload_rcv_len = 0;
+ /* allocate our bsg tracking structure */
+ dd_data = kmalloc(sizeof(struct bsg_job_data), GFP_KERNEL);
+ if (!dd_data) {
+ lpfc_printf_log(phba, KERN_WARNING, LOG_LIBDFC,
+ "2735 Failed allocation of dd_data\n");
+ rc = -ENOMEM;
+ goto no_dd_data;
+ }
+
if (!lpfc_nlp_get(ndlp)) {
rc = -ENODEV;
- goto out;
+ goto free_dd_data;
}
elscmd = job->request->rqst_data.r_els.els_code;
@@ -271,24 +528,24 @@
if (!rspiocbq) {
lpfc_nlp_put(ndlp);
rc = -ENOMEM;
- goto out;
+ goto free_dd_data;
}
rsp = &rspiocbq->iocb;
rpi = ndlp->nlp_rpi;
- cmdiocbq = lpfc_prep_els_iocb(phba->pport, 1, cmdsize, 0, ndlp,
+ cmdiocbq = lpfc_prep_els_iocb(vport, 1, cmdsize, 0, ndlp,
ndlp->nlp_DID, elscmd);
-
if (!cmdiocbq) {
- lpfc_sli_release_iocbq(phba, rspiocbq);
- return -EIO;
+ rc = -EIO;
+ goto free_rspiocbq;
}
- job->dd_data = cmdiocbq;
+ /* prep els iocb set context1 to the ndlp, context2 to the command
+ * dmabuf, context3 holds the data dmabuf
+ */
pcmd = (struct lpfc_dmabuf *) cmdiocbq->context2;
prsp = (struct lpfc_dmabuf *) pcmd->list.next;
-
lpfc_mbuf_free(phba, pcmd->virt, pcmd->phys);
kfree(pcmd);
lpfc_mbuf_free(phba, prsp->virt, prsp->phys);
@@ -300,7 +557,6 @@
request_nseg = pci_map_sg(phba->pcidev, job->request_payload.sg_list,
job->request_payload.sg_cnt, DMA_TO_DEVICE);
-
for_each_sg(job->request_payload.sg_list, sgel, request_nseg, numbde) {
busaddr = sg_dma_address(sgel);
bpl->tus.f.bdeFlags = BUFF_TYPE_BDE_64;
@@ -322,7 +578,6 @@
bpl->addrHigh = cpu_to_le32(putPaddrHigh(busaddr));
bpl++;
}
-
cmdiocbq->iocb.un.elsreq64.bdl.bdeSize =
(request_nseg + reply_nseg) * sizeof(struct ulp_bde64);
cmdiocbq->iocb.ulpContext = rpi;
@@ -330,102 +585,62 @@
cmdiocbq->context1 = NULL;
cmdiocbq->context2 = NULL;
- iocb_status = lpfc_sli_issue_iocb_wait(phba, LPFC_ELS_RING, cmdiocbq,
- rspiocbq, (phba->fc_ratov * 2)
- + LPFC_DRVR_TIMEOUT);
+ cmdiocbq->iocb_cmpl = lpfc_bsg_rport_els_cmp;
+ cmdiocbq->context1 = dd_data;
+ cmdiocbq->context2 = rspiocbq;
+ dd_data->type = TYPE_IOCB;
+ dd_data->context_un.iocb.cmdiocbq = cmdiocbq;
+ dd_data->context_un.iocb.rspiocbq = rspiocbq;
+ dd_data->context_un.iocb.set_job = job;
+ dd_data->context_un.iocb.bmp = NULL;;
+ dd_data->context_un.iocb.ndlp = ndlp;
- /* release the new ndlp once the iocb completes */
- lpfc_nlp_put(ndlp);
- if (iocb_status != IOCB_TIMEDOUT) {
- pci_unmap_sg(phba->pcidev, job->request_payload.sg_list,
- job->request_payload.sg_cnt, DMA_TO_DEVICE);
- pci_unmap_sg(phba->pcidev, job->reply_payload.sg_list,
- job->reply_payload.sg_cnt, DMA_FROM_DEVICE);
+ if (phba->cfg_poll & DISABLE_FCP_RING_INT) {
+ creg_val = readl(phba->HCregaddr);
+ creg_val |= (HC_R0INT_ENA << LPFC_FCP_RING);
+ writel(creg_val, phba->HCregaddr);
+ readl(phba->HCregaddr); /* flush */
}
+ rc = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, cmdiocbq, 0);
+ lpfc_nlp_put(ndlp);
+ if (rc == IOCB_SUCCESS)
+ return 0; /* done for now */
- if (iocb_status == IOCB_SUCCESS) {
- if (rsp->ulpStatus == IOSTAT_SUCCESS) {
- job->reply->reply_payload_rcv_len =
- rsp->un.elsreq64.bdl.bdeSize;
- rc = 0;
- } else if (rsp->ulpStatus == IOSTAT_LS_RJT) {
- struct fc_bsg_ctels_reply *els_reply;
- /* LS_RJT data returned in word 4 */
- uint8_t *rjt_data = (uint8_t *)&rsp->un.ulpWord[4];
+ pci_unmap_sg(phba->pcidev, job->request_payload.sg_list,
+ job->request_payload.sg_cnt, DMA_TO_DEVICE);
+ pci_unmap_sg(phba->pcidev, job->reply_payload.sg_list,
+ job->reply_payload.sg_cnt, DMA_FROM_DEVICE);
- els_reply = &job->reply->reply_data.ctels_reply;
- job->reply->result = 0;
- els_reply->status = FC_CTELS_STATUS_REJECT;
- els_reply->rjt_data.action = rjt_data[0];
- els_reply->rjt_data.reason_code = rjt_data[1];
- els_reply->rjt_data.reason_explanation = rjt_data[2];
- els_reply->rjt_data.vendor_unique = rjt_data[3];
- } else
- rc = -EIO;
- } else
- rc = -EIO;
+ lpfc_mbuf_free(phba, pbuflist->virt, pbuflist->phys);
- if (iocb_status != IOCB_TIMEDOUT)
- lpfc_els_free_iocb(phba, cmdiocbq);
+ lpfc_sli_release_iocbq(phba, cmdiocbq);
+free_rspiocbq:
lpfc_sli_release_iocbq(phba, rspiocbq);
-out:
+free_dd_data:
+ kfree(dd_data);
+
+no_dd_data:
/* make error code available to userspace */
job->reply->result = rc;
- /* complete the job back to userspace */
- job->job_done(job);
-
- return 0;
+ job->dd_data = NULL;
+ return rc;
}
-struct lpfc_ct_event {
- struct list_head node;
- int ref;
- wait_queue_head_t wq;
-
- /* Event type and waiter identifiers */
- uint32_t type_mask;
- uint32_t req_id;
- uint32_t reg_id;
-
- /* next two flags are here for the auto-delete logic */
- unsigned long wait_time_stamp;
- int waiting;
-
- /* seen and not seen events */
- struct list_head events_to_get;
- struct list_head events_to_see;
-};
-
-struct event_data {
- struct list_head node;
- uint32_t type;
- uint32_t immed_dat;
- void *data;
- uint32_t len;
-};
-
-static struct lpfc_ct_event *
-lpfc_ct_event_new(int ev_reg_id, uint32_t ev_req_id)
-{
- struct lpfc_ct_event *evt = kzalloc(sizeof(*evt), GFP_KERNEL);
- if (!evt)
- return NULL;
-
- INIT_LIST_HEAD(&evt->events_to_get);
- INIT_LIST_HEAD(&evt->events_to_see);
- evt->req_id = ev_req_id;
- evt->reg_id = ev_reg_id;
- evt->wait_time_stamp = jiffies;
- init_waitqueue_head(&evt->wq);
-
- return evt;
-}
-
+/**
+ * lpfc_bsg_event_free - frees an allocated event structure
+ * @kref: Pointer to a kref.
+ *
+ * Called from kref_put. Back cast the kref into an event structure address.
+ * Free any events to get, delete associated nodes, free any events to see,
+ * free any data then free the event itself.
+ **/
static void
-lpfc_ct_event_free(struct lpfc_ct_event *evt)
+lpfc_bsg_event_free(struct kref *kref)
{
+ struct lpfc_bsg_event *evt = container_of(kref, struct lpfc_bsg_event,
+ kref);
struct event_data *ed;
list_del(&evt->node);
@@ -447,25 +662,82 @@
kfree(evt);
}
+/**
+ * lpfc_bsg_event_ref - increments the kref for an event
+ * @evt: Pointer to an event structure.
+ **/
static inline void
-lpfc_ct_event_ref(struct lpfc_ct_event *evt)
+lpfc_bsg_event_ref(struct lpfc_bsg_event *evt)
{
- evt->ref++;
+ kref_get(&evt->kref);
}
+/**
+ * lpfc_bsg_event_unref - Uses kref_put to free an event structure
+ * @evt: Pointer to an event structure.
+ **/
static inline void
-lpfc_ct_event_unref(struct lpfc_ct_event *evt)
+lpfc_bsg_event_unref(struct lpfc_bsg_event *evt)
{
- if (--evt->ref < 0)
- lpfc_ct_event_free(evt);
+ kref_put(&evt->kref, lpfc_bsg_event_free);
}
-#define SLI_CT_ELX_LOOPBACK 0x10
+/**
+ * lpfc_bsg_event_new - allocate and initialize a event structure
+ * @ev_mask: Mask of events.
+ * @ev_reg_id: Event reg id.
+ * @ev_req_id: Event request id.
+ **/
+static struct lpfc_bsg_event *
+lpfc_bsg_event_new(uint32_t ev_mask, int ev_reg_id, uint32_t ev_req_id)
+{
+ struct lpfc_bsg_event *evt = kzalloc(sizeof(*evt), GFP_KERNEL);
-enum ELX_LOOPBACK_CMD {
- ELX_LOOPBACK_XRI_SETUP,
- ELX_LOOPBACK_DATA,
-};
+ if (!evt)
+ return NULL;
+
+ INIT_LIST_HEAD(&evt->events_to_get);
+ INIT_LIST_HEAD(&evt->events_to_see);
+ evt->type_mask = ev_mask;
+ evt->req_id = ev_req_id;
+ evt->reg_id = ev_reg_id;
+ evt->wait_time_stamp = jiffies;
+ init_waitqueue_head(&evt->wq);
+ kref_init(&evt->kref);
+ return evt;
+}
+
+/**
+ * diag_cmd_data_free - Frees an lpfc dma buffer extension
+ * @phba: Pointer to HBA context object.
+ * @mlist: Pointer to an lpfc dma buffer extension.
+ **/
+static int
+diag_cmd_data_free(struct lpfc_hba *phba, struct lpfc_dmabufext *mlist)
+{
+ struct lpfc_dmabufext *mlast;
+ struct pci_dev *pcidev;
+ struct list_head head, *curr, *next;
+
+ if ((!mlist) || (!lpfc_is_link_up(phba) &&
+ (phba->link_flag & LS_LOOPBACK_MODE))) {
+ return 0;
+ }
+
+ pcidev = phba->pcidev;
+ list_add_tail(&head, &mlist->dma.list);
+
+ list_for_each_safe(curr, next, &head) {
+ mlast = list_entry(curr, struct lpfc_dmabufext , dma.list);
+ if (mlast->dma.virt)
+ dma_free_coherent(&pcidev->dev,
+ mlast->size,
+ mlast->dma.virt,
+ mlast->dma.phys);
+ kfree(mlast);
+ }
+ return 0;
+}
/**
* lpfc_bsg_ct_unsol_event - process an unsolicited CT command
@@ -474,9 +746,9 @@
* @piocbq:
*
* This function is called when an unsolicited CT command is received. It
- * forwards the event to any processes registerd to receive CT events.
- */
-void
+ * forwards the event to any processes registered to receive CT events.
+ **/
+int
lpfc_bsg_ct_unsol_event(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
struct lpfc_iocbq *piocbq)
{
@@ -484,7 +756,7 @@
uint32_t cmd;
uint32_t len;
struct lpfc_dmabuf *dmabuf = NULL;
- struct lpfc_ct_event *evt;
+ struct lpfc_bsg_event *evt;
struct event_data *evt_dat = NULL;
struct lpfc_iocbq *iocbq;
size_t offset = 0;
@@ -496,6 +768,9 @@
struct lpfc_dmabuf *bdeBuf2 = piocbq->context3;
struct lpfc_hbq_entry *hbqe;
struct lpfc_sli_ct_request *ct_req;
+ struct fc_bsg_job *job = NULL;
+ unsigned long flags;
+ int size = 0;
INIT_LIST_HEAD(&head);
list_add_tail(&head, &piocbq->list);
@@ -504,6 +779,10 @@
piocbq->iocb.un.cont64[0].tus.f.bdeSize == 0)
goto error_ct_unsol_exit;
+ if (phba->link_state == LPFC_HBA_ERROR ||
+ (!(phba->sli.sli_flag & LPFC_SLI_ACTIVE)))
+ goto error_ct_unsol_exit;
+
if (phba->sli3_options & LPFC_SLI3_HBQ_ENABLED)
dmabuf = bdeBuf1;
else {
@@ -511,7 +790,8 @@
piocbq->iocb.un.cont64[0].addrLow);
dmabuf = lpfc_sli_ringpostbuf_get(phba, pring, dma_addr);
}
-
+ if (dmabuf == NULL)
+ goto error_ct_unsol_exit;
ct_req = (struct lpfc_sli_ct_request *)dmabuf->virt;
evt_req_id = ct_req->FsType;
cmd = ct_req->CommandResponse.bits.CmdRsp;
@@ -519,24 +799,24 @@
if (!(phba->sli3_options & LPFC_SLI3_HBQ_ENABLED))
lpfc_sli_ringpostbuf_put(phba, pring, dmabuf);
- mutex_lock(&phba->ct_event_mutex);
+ spin_lock_irqsave(&phba->ct_ev_lock, flags);
list_for_each_entry(evt, &phba->ct_ev_waiters, node) {
- if (evt->req_id != evt_req_id)
+ if (!(evt->type_mask & FC_REG_CT_EVENT) ||
+ evt->req_id != evt_req_id)
continue;
- lpfc_ct_event_ref(evt);
-
+ lpfc_bsg_event_ref(evt);
+ spin_unlock_irqrestore(&phba->ct_ev_lock, flags);
evt_dat = kzalloc(sizeof(*evt_dat), GFP_KERNEL);
- if (!evt_dat) {
- lpfc_ct_event_unref(evt);
+ if (evt_dat == NULL) {
+ spin_lock_irqsave(&phba->ct_ev_lock, flags);
+ lpfc_bsg_event_unref(evt);
lpfc_printf_log(phba, KERN_WARNING, LOG_LIBDFC,
"2614 Memory allocation failed for "
"CT event\n");
break;
}
- mutex_unlock(&phba->ct_event_mutex);
-
if (phba->sli3_options & LPFC_SLI3_HBQ_ENABLED) {
/* take accumulated byte count from the last iocbq */
iocbq = list_entry(head.prev, typeof(*iocbq), list);
@@ -550,25 +830,25 @@
}
evt_dat->data = kzalloc(evt_dat->len, GFP_KERNEL);
- if (!evt_dat->data) {
+ if (evt_dat->data == NULL) {
lpfc_printf_log(phba, KERN_WARNING, LOG_LIBDFC,
"2615 Memory allocation failed for "
"CT event data, size %d\n",
evt_dat->len);
kfree(evt_dat);
- mutex_lock(&phba->ct_event_mutex);
- lpfc_ct_event_unref(evt);
- mutex_unlock(&phba->ct_event_mutex);
+ spin_lock_irqsave(&phba->ct_ev_lock, flags);
+ lpfc_bsg_event_unref(evt);
+ spin_unlock_irqrestore(&phba->ct_ev_lock, flags);
goto error_ct_unsol_exit;
}
list_for_each_entry(iocbq, &head, list) {
+ size = 0;
if (phba->sli3_options & LPFC_SLI3_HBQ_ENABLED) {
bdeBuf1 = iocbq->context2;
bdeBuf2 = iocbq->context3;
}
for (i = 0; i < iocbq->iocb.ulpBdeCount; i++) {
- int size = 0;
if (phba->sli3_options &
LPFC_SLI3_HBQ_ENABLED) {
if (i == 0) {
@@ -601,9 +881,11 @@
iocbq);
kfree(evt_dat->data);
kfree(evt_dat);
- mutex_lock(&phba->ct_event_mutex);
- lpfc_ct_event_unref(evt);
- mutex_unlock(&phba->ct_event_mutex);
+ spin_lock_irqsave(&phba->ct_ev_lock,
+ flags);
+ lpfc_bsg_event_unref(evt);
+ spin_unlock_irqrestore(
+ &phba->ct_ev_lock, flags);
goto error_ct_unsol_exit;
}
memcpy((char *)(evt_dat->data) + offset,
@@ -616,15 +898,24 @@
dmabuf);
} else {
switch (cmd) {
+ case ELX_LOOPBACK_DATA:
+ diag_cmd_data_free(phba,
+ (struct lpfc_dmabufext *)
+ dmabuf);
+ break;
case ELX_LOOPBACK_XRI_SETUP:
- if (!(phba->sli3_options &
- LPFC_SLI3_HBQ_ENABLED))
+ if ((phba->sli_rev ==
+ LPFC_SLI_REV2) ||
+ (phba->sli3_options &
+ LPFC_SLI3_HBQ_ENABLED
+ )) {
+ lpfc_in_buf_free(phba,
+ dmabuf);
+ } else {
lpfc_post_buffer(phba,
pring,
1);
- else
- lpfc_in_buf_free(phba,
- dmabuf);
+ }
break;
default:
if (!(phba->sli3_options &
@@ -638,7 +929,7 @@
}
}
- mutex_lock(&phba->ct_event_mutex);
+ spin_lock_irqsave(&phba->ct_ev_lock, flags);
if (phba->sli_rev == LPFC_SLI_REV4) {
evt_dat->immed_dat = phba->ctx_idx;
phba->ctx_idx = (phba->ctx_idx + 1) % 64;
@@ -651,122 +942,144 @@
evt_dat->type = FC_REG_CT_EVENT;
list_add(&evt_dat->node, &evt->events_to_see);
- wake_up_interruptible(&evt->wq);
- lpfc_ct_event_unref(evt);
- if (evt_req_id == SLI_CT_ELX_LOOPBACK)
+ if (evt_req_id == SLI_CT_ELX_LOOPBACK) {
+ wake_up_interruptible(&evt->wq);
+ lpfc_bsg_event_unref(evt);
break;
+ }
+
+ list_move(evt->events_to_see.prev, &evt->events_to_get);
+ lpfc_bsg_event_unref(evt);
+
+ job = evt->set_job;
+ evt->set_job = NULL;
+ if (job) {
+ job->reply->reply_payload_rcv_len = size;
+ /* make error code available to userspace */
+ job->reply->result = 0;
+ job->dd_data = NULL;
+ /* complete the job back to userspace */
+ spin_unlock_irqrestore(&phba->ct_ev_lock, flags);
+ job->job_done(job);
+ spin_lock_irqsave(&phba->ct_ev_lock, flags);
+ }
}
- mutex_unlock(&phba->ct_event_mutex);
+ spin_unlock_irqrestore(&phba->ct_ev_lock, flags);
error_ct_unsol_exit:
if (!list_empty(&head))
list_del(&head);
-
- return;
+ if (evt_req_id == SLI_CT_ELX_LOOPBACK)
+ return 0;
+ return 1;
}
/**
- * lpfc_bsg_set_event - process a SET_EVENT bsg vendor command
+ * lpfc_bsg_hba_set_event - process a SET_EVENT bsg vendor command
* @job: SET_EVENT fc_bsg_job
- */
+ **/
static int
-lpfc_bsg_set_event(struct fc_bsg_job *job)
+lpfc_bsg_hba_set_event(struct fc_bsg_job *job)
{
struct lpfc_vport *vport = (struct lpfc_vport *)job->shost->hostdata;
struct lpfc_hba *phba = vport->phba;
struct set_ct_event *event_req;
- struct lpfc_ct_event *evt;
+ struct lpfc_bsg_event *evt;
int rc = 0;
+ struct bsg_job_data *dd_data = NULL;
+ uint32_t ev_mask;
+ unsigned long flags;
if (job->request_len <
sizeof(struct fc_bsg_request) + sizeof(struct set_ct_event)) {
lpfc_printf_log(phba, KERN_WARNING, LOG_LIBDFC,
"2612 Received SET_CT_EVENT below minimum "
"size\n");
- return -EINVAL;
+ rc = -EINVAL;
+ goto job_error;
+ }
+
+ dd_data = kmalloc(sizeof(struct bsg_job_data), GFP_KERNEL);
+ if (dd_data == NULL) {
+ lpfc_printf_log(phba, KERN_WARNING, LOG_LIBDFC,
+ "2734 Failed allocation of dd_data\n");
+ rc = -ENOMEM;
+ goto job_error;
}
event_req = (struct set_ct_event *)
job->request->rqst_data.h_vendor.vendor_cmd;
-
- mutex_lock(&phba->ct_event_mutex);
+ ev_mask = ((uint32_t)(unsigned long)event_req->type_mask &
+ FC_REG_EVENT_MASK);
+ spin_lock_irqsave(&phba->ct_ev_lock, flags);
list_for_each_entry(evt, &phba->ct_ev_waiters, node) {
if (evt->reg_id == event_req->ev_reg_id) {
- lpfc_ct_event_ref(evt);
+ lpfc_bsg_event_ref(evt);
evt->wait_time_stamp = jiffies;
break;
}
}
- mutex_unlock(&phba->ct_event_mutex);
+ spin_unlock_irqrestore(&phba->ct_ev_lock, flags);
if (&evt->node == &phba->ct_ev_waiters) {
/* no event waiting struct yet - first call */
- evt = lpfc_ct_event_new(event_req->ev_reg_id,
+ evt = lpfc_bsg_event_new(ev_mask, event_req->ev_reg_id,
event_req->ev_req_id);
if (!evt) {
lpfc_printf_log(phba, KERN_WARNING, LOG_LIBDFC,
"2617 Failed allocation of event "
"waiter\n");
- return -ENOMEM;
+ rc = -ENOMEM;
+ goto job_error;
}
- mutex_lock(&phba->ct_event_mutex);
+ spin_lock_irqsave(&phba->ct_ev_lock, flags);
list_add(&evt->node, &phba->ct_ev_waiters);
- lpfc_ct_event_ref(evt);
- mutex_unlock(&phba->ct_event_mutex);
+ lpfc_bsg_event_ref(evt);
+ evt->wait_time_stamp = jiffies;
+ spin_unlock_irqrestore(&phba->ct_ev_lock, flags);
}
+ spin_lock_irqsave(&phba->ct_ev_lock, flags);
evt->waiting = 1;
- if (wait_event_interruptible(evt->wq,
- !list_empty(&evt->events_to_see))) {
- mutex_lock(&phba->ct_event_mutex);
- lpfc_ct_event_unref(evt); /* release ref */
- lpfc_ct_event_unref(evt); /* delete */
- mutex_unlock(&phba->ct_event_mutex);
- rc = -EINTR;
- goto set_event_out;
- }
+ dd_data->type = TYPE_EVT;
+ dd_data->context_un.evt = evt;
+ evt->set_job = job; /* for unsolicited command */
+ job->dd_data = dd_data; /* for fc transport timeout callback*/
+ spin_unlock_irqrestore(&phba->ct_ev_lock, flags);
+ return 0; /* call job done later */
- evt->wait_time_stamp = jiffies;
- evt->waiting = 0;
+job_error:
+ if (dd_data != NULL)
+ kfree(dd_data);
- mutex_lock(&phba->ct_event_mutex);
- list_move(evt->events_to_see.prev, &evt->events_to_get);
- lpfc_ct_event_unref(evt); /* release ref */
- mutex_unlock(&phba->ct_event_mutex);
-
-set_event_out:
- /* set_event carries no reply payload */
- job->reply->reply_payload_rcv_len = 0;
- /* make error code available to userspace */
- job->reply->result = rc;
- /* complete the job back to userspace */
- job->job_done(job);
-
- return 0;
+ job->dd_data = NULL;
+ return rc;
}
/**
- * lpfc_bsg_get_event - process a GET_EVENT bsg vendor command
+ * lpfc_bsg_hba_get_event - process a GET_EVENT bsg vendor command
* @job: GET_EVENT fc_bsg_job
- */
+ **/
static int
-lpfc_bsg_get_event(struct fc_bsg_job *job)
+lpfc_bsg_hba_get_event(struct fc_bsg_job *job)
{
struct lpfc_vport *vport = (struct lpfc_vport *)job->shost->hostdata;
struct lpfc_hba *phba = vport->phba;
struct get_ct_event *event_req;
struct get_ct_event_reply *event_reply;
- struct lpfc_ct_event *evt;
+ struct lpfc_bsg_event *evt;
struct event_data *evt_dat = NULL;
- int rc = 0;
+ unsigned long flags;
+ uint32_t rc = 0;
if (job->request_len <
sizeof(struct fc_bsg_request) + sizeof(struct get_ct_event)) {
lpfc_printf_log(phba, KERN_WARNING, LOG_LIBDFC,
"2613 Received GET_CT_EVENT request below "
"minimum size\n");
- return -EINVAL;
+ rc = -EINVAL;
+ goto job_error;
}
event_req = (struct get_ct_event *)
@@ -774,13 +1087,12 @@
event_reply = (struct get_ct_event_reply *)
job->reply->reply_data.vendor_reply.vendor_rsp;
-
- mutex_lock(&phba->ct_event_mutex);
+ spin_lock_irqsave(&phba->ct_ev_lock, flags);
list_for_each_entry(evt, &phba->ct_ev_waiters, node) {
if (evt->reg_id == event_req->ev_reg_id) {
if (list_empty(&evt->events_to_get))
break;
- lpfc_ct_event_ref(evt);
+ lpfc_bsg_event_ref(evt);
evt->wait_time_stamp = jiffies;
evt_dat = list_entry(evt->events_to_get.prev,
struct event_data, node);
@@ -788,45 +1100,1539 @@
break;
}
}
- mutex_unlock(&phba->ct_event_mutex);
+ spin_unlock_irqrestore(&phba->ct_ev_lock, flags);
- if (!evt_dat) {
+ /* The app may continue to ask for event data until it gets
+ * an error indicating that there isn't anymore
+ */
+ if (evt_dat == NULL) {
job->reply->reply_payload_rcv_len = 0;
rc = -ENOENT;
- goto error_get_event_exit;
+ goto job_error;
}
- if (evt_dat->len > job->reply_payload.payload_len) {
- evt_dat->len = job->reply_payload.payload_len;
- lpfc_printf_log(phba, KERN_WARNING, LOG_LIBDFC,
- "2618 Truncated event data at %d "
- "bytes\n",
- job->reply_payload.payload_len);
+ if (evt_dat->len > job->request_payload.payload_len) {
+ evt_dat->len = job->request_payload.payload_len;
+ lpfc_printf_log(phba, KERN_WARNING, LOG_LIBDFC,
+ "2618 Truncated event data at %d "
+ "bytes\n",
+ job->request_payload.payload_len);
}
+ event_reply->type = evt_dat->type;
event_reply->immed_data = evt_dat->immed_dat;
-
if (evt_dat->len > 0)
job->reply->reply_payload_rcv_len =
- sg_copy_from_buffer(job->reply_payload.sg_list,
- job->reply_payload.sg_cnt,
+ sg_copy_from_buffer(job->request_payload.sg_list,
+ job->request_payload.sg_cnt,
evt_dat->data, evt_dat->len);
else
job->reply->reply_payload_rcv_len = 0;
- rc = 0;
- if (evt_dat)
+ if (evt_dat) {
kfree(evt_dat->data);
- kfree(evt_dat);
- mutex_lock(&phba->ct_event_mutex);
- lpfc_ct_event_unref(evt);
- mutex_unlock(&phba->ct_event_mutex);
+ kfree(evt_dat);
+ }
-error_get_event_exit:
+ spin_lock_irqsave(&phba->ct_ev_lock, flags);
+ lpfc_bsg_event_unref(evt);
+ spin_unlock_irqrestore(&phba->ct_ev_lock, flags);
+ job->dd_data = NULL;
+ job->reply->result = 0;
+ job->job_done(job);
+ return 0;
+
+job_error:
+ job->dd_data = NULL;
+ job->reply->result = rc;
+ return rc;
+}
+
+/**
+ * lpfc_issue_ct_rsp_cmp - lpfc_issue_ct_rsp's completion handler
+ * @phba: Pointer to HBA context object.
+ * @cmdiocbq: Pointer to command iocb.
+ * @rspiocbq: Pointer to response iocb.
+ *
+ * This function is the completion handler for iocbs issued using
+ * lpfc_issue_ct_rsp_cmp function. This function is called by the
+ * ring event handler function without any lock held. This function
+ * can be called from both worker thread context and interrupt
+ * context. This function also can be called from other thread which
+ * cleans up the SLI layer objects.
+ * This function copy the contents of the response iocb to the
+ * response iocb memory object provided by the caller of
+ * lpfc_sli_issue_iocb_wait and then wakes up the thread which
+ * sleeps for the iocb completion.
+ **/
+static void
+lpfc_issue_ct_rsp_cmp(struct lpfc_hba *phba,
+ struct lpfc_iocbq *cmdiocbq,
+ struct lpfc_iocbq *rspiocbq)
+{
+ struct bsg_job_data *dd_data;
+ struct fc_bsg_job *job;
+ IOCB_t *rsp;
+ struct lpfc_dmabuf *bmp;
+ struct lpfc_nodelist *ndlp;
+ unsigned long flags;
+ int rc = 0;
+
+ spin_lock_irqsave(&phba->ct_ev_lock, flags);
+ dd_data = cmdiocbq->context1;
+ /* normal completion and timeout crossed paths, already done */
+ if (!dd_data) {
+ spin_unlock_irqrestore(&phba->hbalock, flags);
+ return;
+ }
+
+ job = dd_data->context_un.iocb.set_job;
+ bmp = dd_data->context_un.iocb.bmp;
+ rsp = &rspiocbq->iocb;
+ ndlp = dd_data->context_un.iocb.ndlp;
+
+ pci_unmap_sg(phba->pcidev, job->request_payload.sg_list,
+ job->request_payload.sg_cnt, DMA_TO_DEVICE);
+
+ if (rsp->ulpStatus) {
+ if (rsp->ulpStatus == IOSTAT_LOCAL_REJECT) {
+ switch (rsp->un.ulpWord[4] & 0xff) {
+ case IOERR_SEQUENCE_TIMEOUT:
+ rc = -ETIMEDOUT;
+ break;
+ case IOERR_INVALID_RPI:
+ rc = -EFAULT;
+ break;
+ default:
+ rc = -EACCES;
+ break;
+ }
+ } else
+ rc = -EACCES;
+ } else
+ job->reply->reply_payload_rcv_len =
+ rsp->un.genreq64.bdl.bdeSize;
+
+ lpfc_mbuf_free(phba, bmp->virt, bmp->phys);
+ lpfc_sli_release_iocbq(phba, cmdiocbq);
+ lpfc_nlp_put(ndlp);
+ kfree(bmp);
+ kfree(dd_data);
/* make error code available to userspace */
job->reply->result = rc;
+ job->dd_data = NULL;
/* complete the job back to userspace */
job->job_done(job);
+ spin_unlock_irqrestore(&phba->ct_ev_lock, flags);
+ return;
+}
+
+/**
+ * lpfc_issue_ct_rsp - issue a ct response
+ * @phba: Pointer to HBA context object.
+ * @job: Pointer to the job object.
+ * @tag: tag index value into the ports context exchange array.
+ * @bmp: Pointer to a dma buffer descriptor.
+ * @num_entry: Number of enties in the bde.
+ **/
+static int
+lpfc_issue_ct_rsp(struct lpfc_hba *phba, struct fc_bsg_job *job, uint32_t tag,
+ struct lpfc_dmabuf *bmp, int num_entry)
+{
+ IOCB_t *icmd;
+ struct lpfc_iocbq *ctiocb = NULL;
+ int rc = 0;
+ struct lpfc_nodelist *ndlp = NULL;
+ struct bsg_job_data *dd_data;
+ uint32_t creg_val;
+
+ /* allocate our bsg tracking structure */
+ dd_data = kmalloc(sizeof(struct bsg_job_data), GFP_KERNEL);
+ if (!dd_data) {
+ lpfc_printf_log(phba, KERN_WARNING, LOG_LIBDFC,
+ "2736 Failed allocation of dd_data\n");
+ rc = -ENOMEM;
+ goto no_dd_data;
+ }
+
+ /* Allocate buffer for command iocb */
+ ctiocb = lpfc_sli_get_iocbq(phba);
+ if (!ctiocb) {
+ rc = ENOMEM;
+ goto no_ctiocb;
+ }
+
+ icmd = &ctiocb->iocb;
+ icmd->un.xseq64.bdl.ulpIoTag32 = 0;
+ icmd->un.xseq64.bdl.addrHigh = putPaddrHigh(bmp->phys);
+ icmd->un.xseq64.bdl.addrLow = putPaddrLow(bmp->phys);
+ icmd->un.xseq64.bdl.bdeFlags = BUFF_TYPE_BLP_64;
+ icmd->un.xseq64.bdl.bdeSize = (num_entry * sizeof(struct ulp_bde64));
+ icmd->un.xseq64.w5.hcsw.Fctl = (LS | LA);
+ icmd->un.xseq64.w5.hcsw.Dfctl = 0;
+ icmd->un.xseq64.w5.hcsw.Rctl = FC_RCTL_DD_SOL_CTL;
+ icmd->un.xseq64.w5.hcsw.Type = FC_TYPE_CT;
+
+ /* Fill in rest of iocb */
+ icmd->ulpCommand = CMD_XMIT_SEQUENCE64_CX;
+ icmd->ulpBdeCount = 1;
+ icmd->ulpLe = 1;
+ icmd->ulpClass = CLASS3;
+ if (phba->sli_rev == LPFC_SLI_REV4) {
+ /* Do not issue unsol response if oxid not marked as valid */
+ if (!(phba->ct_ctx[tag].flags & UNSOL_VALID)) {
+ rc = IOCB_ERROR;
+ goto issue_ct_rsp_exit;
+ }
+ icmd->ulpContext = phba->ct_ctx[tag].oxid;
+ ndlp = lpfc_findnode_did(phba->pport, phba->ct_ctx[tag].SID);
+ if (!ndlp) {
+ lpfc_printf_log(phba, KERN_WARNING, LOG_ELS,
+ "2721 ndlp null for oxid %x SID %x\n",
+ icmd->ulpContext,
+ phba->ct_ctx[tag].SID);
+ rc = IOCB_ERROR;
+ goto issue_ct_rsp_exit;
+ }
+ icmd->un.ulpWord[3] = ndlp->nlp_rpi;
+ /* The exchange is done, mark the entry as invalid */
+ phba->ct_ctx[tag].flags &= ~UNSOL_VALID;
+ } else
+ icmd->ulpContext = (ushort) tag;
+
+ icmd->ulpTimeout = phba->fc_ratov * 2;
+
+ /* Xmit CT response on exchange <xid> */
+ lpfc_printf_log(phba, KERN_INFO, LOG_ELS,
+ "2722 Xmit CT response on exchange x%x Data: x%x x%x\n",
+ icmd->ulpContext, icmd->ulpIoTag, phba->link_state);
+
+ ctiocb->iocb_cmpl = NULL;
+ ctiocb->iocb_flag |= LPFC_IO_LIBDFC;
+ ctiocb->vport = phba->pport;
+ ctiocb->context3 = bmp;
+
+ ctiocb->iocb_cmpl = lpfc_issue_ct_rsp_cmp;
+ ctiocb->context1 = dd_data;
+ ctiocb->context2 = NULL;
+ dd_data->type = TYPE_IOCB;
+ dd_data->context_un.iocb.cmdiocbq = ctiocb;
+ dd_data->context_un.iocb.rspiocbq = NULL;
+ dd_data->context_un.iocb.set_job = job;
+ dd_data->context_un.iocb.bmp = bmp;
+ dd_data->context_un.iocb.ndlp = ndlp;
+
+ if (phba->cfg_poll & DISABLE_FCP_RING_INT) {
+ creg_val = readl(phba->HCregaddr);
+ creg_val |= (HC_R0INT_ENA << LPFC_FCP_RING);
+ writel(creg_val, phba->HCregaddr);
+ readl(phba->HCregaddr); /* flush */
+ }
+
+ rc = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, ctiocb, 0);
+
+ if (rc == IOCB_SUCCESS)
+ return 0; /* done for now */
+
+issue_ct_rsp_exit:
+ lpfc_sli_release_iocbq(phba, ctiocb);
+no_ctiocb:
+ kfree(dd_data);
+no_dd_data:
+ return rc;
+}
+
+/**
+ * lpfc_bsg_send_mgmt_rsp - process a SEND_MGMT_RESP bsg vendor command
+ * @job: SEND_MGMT_RESP fc_bsg_job
+ **/
+static int
+lpfc_bsg_send_mgmt_rsp(struct fc_bsg_job *job)
+{
+ struct lpfc_vport *vport = (struct lpfc_vport *)job->shost->hostdata;
+ struct lpfc_hba *phba = vport->phba;
+ struct send_mgmt_resp *mgmt_resp = (struct send_mgmt_resp *)
+ job->request->rqst_data.h_vendor.vendor_cmd;
+ struct ulp_bde64 *bpl;
+ struct lpfc_dmabuf *bmp = NULL;
+ struct scatterlist *sgel = NULL;
+ int request_nseg;
+ int numbde;
+ dma_addr_t busaddr;
+ uint32_t tag = mgmt_resp->tag;
+ unsigned long reqbfrcnt =
+ (unsigned long)job->request_payload.payload_len;
+ int rc = 0;
+
+ /* in case no data is transferred */
+ job->reply->reply_payload_rcv_len = 0;
+
+ if (!reqbfrcnt || (reqbfrcnt > (80 * BUF_SZ_4K))) {
+ rc = -ERANGE;
+ goto send_mgmt_rsp_exit;
+ }
+
+ bmp = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
+ if (!bmp) {
+ rc = -ENOMEM;
+ goto send_mgmt_rsp_exit;
+ }
+
+ bmp->virt = lpfc_mbuf_alloc(phba, 0, &bmp->phys);
+ if (!bmp->virt) {
+ rc = -ENOMEM;
+ goto send_mgmt_rsp_free_bmp;
+ }
+
+ INIT_LIST_HEAD(&bmp->list);
+ bpl = (struct ulp_bde64 *) bmp->virt;
+ request_nseg = pci_map_sg(phba->pcidev, job->request_payload.sg_list,
+ job->request_payload.sg_cnt, DMA_TO_DEVICE);
+ for_each_sg(job->request_payload.sg_list, sgel, request_nseg, numbde) {
+ busaddr = sg_dma_address(sgel);
+ bpl->tus.f.bdeFlags = BUFF_TYPE_BDE_64;
+ bpl->tus.f.bdeSize = sg_dma_len(sgel);
+ bpl->tus.w = cpu_to_le32(bpl->tus.w);
+ bpl->addrLow = cpu_to_le32(putPaddrLow(busaddr));
+ bpl->addrHigh = cpu_to_le32(putPaddrHigh(busaddr));
+ bpl++;
+ }
+
+ rc = lpfc_issue_ct_rsp(phba, job, tag, bmp, request_nseg);
+
+ if (rc == IOCB_SUCCESS)
+ return 0; /* done for now */
+
+ /* TBD need to handle a timeout */
+ pci_unmap_sg(phba->pcidev, job->request_payload.sg_list,
+ job->request_payload.sg_cnt, DMA_TO_DEVICE);
+ rc = -EACCES;
+ lpfc_mbuf_free(phba, bmp->virt, bmp->phys);
+
+send_mgmt_rsp_free_bmp:
+ kfree(bmp);
+send_mgmt_rsp_exit:
+ /* make error code available to userspace */
+ job->reply->result = rc;
+ job->dd_data = NULL;
+ return rc;
+}
+
+/**
+ * lpfc_bsg_diag_mode - process a LPFC_BSG_VENDOR_DIAG_MODE bsg vendor command
+ * @job: LPFC_BSG_VENDOR_DIAG_MODE
+ *
+ * This function is responsible for placing a port into diagnostic loopback
+ * mode in order to perform a diagnostic loopback test.
+ * All new scsi requests are blocked, a small delay is used to allow the
+ * scsi requests to complete then the link is brought down. If the link is
+ * is placed in loopback mode then scsi requests are again allowed
+ * so the scsi mid-layer doesn't give up on the port.
+ * All of this is done in-line.
+ */
+static int
+lpfc_bsg_diag_mode(struct fc_bsg_job *job)
+{
+ struct Scsi_Host *shost = job->shost;
+ struct lpfc_vport *vport = (struct lpfc_vport *)job->shost->hostdata;
+ struct lpfc_hba *phba = vport->phba;
+ struct diag_mode_set *loopback_mode;
+ struct lpfc_sli *psli = &phba->sli;
+ struct lpfc_sli_ring *pring = &psli->ring[LPFC_FCP_RING];
+ uint32_t link_flags;
+ uint32_t timeout;
+ struct lpfc_vport **vports;
+ LPFC_MBOXQ_t *pmboxq;
+ int mbxstatus;
+ int i = 0;
+ int rc = 0;
+
+ /* no data to return just the return code */
+ job->reply->reply_payload_rcv_len = 0;
+
+ if (job->request_len <
+ sizeof(struct fc_bsg_request) + sizeof(struct diag_mode_set)) {
+ lpfc_printf_log(phba, KERN_WARNING, LOG_LIBDFC,
+ "2738 Received DIAG MODE request below minimum "
+ "size\n");
+ rc = -EINVAL;
+ goto job_error;
+ }
+
+ loopback_mode = (struct diag_mode_set *)
+ job->request->rqst_data.h_vendor.vendor_cmd;
+ link_flags = loopback_mode->type;
+ timeout = loopback_mode->timeout;
+
+ if ((phba->link_state == LPFC_HBA_ERROR) ||
+ (psli->sli_flag & LPFC_BLOCK_MGMT_IO) ||
+ (!(psli->sli_flag & LPFC_SLI_ACTIVE))) {
+ rc = -EACCES;
+ goto job_error;
+ }
+
+ pmboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!pmboxq) {
+ rc = -ENOMEM;
+ goto job_error;
+ }
+
+ vports = lpfc_create_vport_work_array(phba);
+ if (vports) {
+ for (i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
+ shost = lpfc_shost_from_vport(vports[i]);
+ scsi_block_requests(shost);
+ }
+
+ lpfc_destroy_vport_work_array(phba, vports);
+ } else {
+ shost = lpfc_shost_from_vport(phba->pport);
+ scsi_block_requests(shost);
+ }
+
+ while (pring->txcmplq_cnt) {
+ if (i++ > 500) /* wait up to 5 seconds */
+ break;
+
+ msleep(10);
+ }
+
+ memset((void *)pmboxq, 0, sizeof(LPFC_MBOXQ_t));
+ pmboxq->u.mb.mbxCommand = MBX_DOWN_LINK;
+ pmboxq->u.mb.mbxOwner = OWN_HOST;
+
+ mbxstatus = lpfc_sli_issue_mbox_wait(phba, pmboxq, LPFC_MBOX_TMO);
+
+ if ((mbxstatus == MBX_SUCCESS) && (pmboxq->u.mb.mbxStatus == 0)) {
+ /* wait for link down before proceeding */
+ i = 0;
+ while (phba->link_state != LPFC_LINK_DOWN) {
+ if (i++ > timeout) {
+ rc = -ETIMEDOUT;
+ goto loopback_mode_exit;
+ }
+
+ msleep(10);
+ }
+
+ memset((void *)pmboxq, 0, sizeof(LPFC_MBOXQ_t));
+ if (link_flags == INTERNAL_LOOP_BACK)
+ pmboxq->u.mb.un.varInitLnk.link_flags = FLAGS_LOCAL_LB;
+ else
+ pmboxq->u.mb.un.varInitLnk.link_flags =
+ FLAGS_TOPOLOGY_MODE_LOOP;
+
+ pmboxq->u.mb.mbxCommand = MBX_INIT_LINK;
+ pmboxq->u.mb.mbxOwner = OWN_HOST;
+
+ mbxstatus = lpfc_sli_issue_mbox_wait(phba, pmboxq,
+ LPFC_MBOX_TMO);
+
+ if ((mbxstatus != MBX_SUCCESS) || (pmboxq->u.mb.mbxStatus))
+ rc = -ENODEV;
+ else {
+ phba->link_flag |= LS_LOOPBACK_MODE;
+ /* wait for the link attention interrupt */
+ msleep(100);
+
+ i = 0;
+ while (phba->link_state != LPFC_HBA_READY) {
+ if (i++ > timeout) {
+ rc = -ETIMEDOUT;
+ break;
+ }
+
+ msleep(10);
+ }
+ }
+
+ } else
+ rc = -ENODEV;
+
+loopback_mode_exit:
+ vports = lpfc_create_vport_work_array(phba);
+ if (vports) {
+ for (i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
+ shost = lpfc_shost_from_vport(vports[i]);
+ scsi_unblock_requests(shost);
+ }
+ lpfc_destroy_vport_work_array(phba, vports);
+ } else {
+ shost = lpfc_shost_from_vport(phba->pport);
+ scsi_unblock_requests(shost);
+ }
+
+ /*
+ * Let SLI layer release mboxq if mbox command completed after timeout.
+ */
+ if (mbxstatus != MBX_TIMEOUT)
+ mempool_free(pmboxq, phba->mbox_mem_pool);
+
+job_error:
+ /* make error code available to userspace */
+ job->reply->result = rc;
+ /* complete the job back to userspace if no error */
+ if (rc == 0)
+ job->job_done(job);
+ return rc;
+}
+
+/**
+ * lpfcdiag_loop_self_reg - obtains a remote port login id
+ * @phba: Pointer to HBA context object
+ * @rpi: Pointer to a remote port login id
+ *
+ * This function obtains a remote port login id so the diag loopback test
+ * can send and receive its own unsolicited CT command.
+ **/
+static int lpfcdiag_loop_self_reg(struct lpfc_hba *phba, uint16_t * rpi)
+{
+ LPFC_MBOXQ_t *mbox;
+ struct lpfc_dmabuf *dmabuff;
+ int status;
+
+ mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mbox)
+ return ENOMEM;
+
+ status = lpfc_reg_rpi(phba, 0, phba->pport->fc_myDID,
+ (uint8_t *)&phba->pport->fc_sparam, mbox, 0);
+ if (status) {
+ mempool_free(mbox, phba->mbox_mem_pool);
+ return ENOMEM;
+ }
+
+ dmabuff = (struct lpfc_dmabuf *) mbox->context1;
+ mbox->context1 = NULL;
+ status = lpfc_sli_issue_mbox_wait(phba, mbox, LPFC_MBOX_TMO);
+
+ if ((status != MBX_SUCCESS) || (mbox->u.mb.mbxStatus)) {
+ lpfc_mbuf_free(phba, dmabuff->virt, dmabuff->phys);
+ kfree(dmabuff);
+ if (status != MBX_TIMEOUT)
+ mempool_free(mbox, phba->mbox_mem_pool);
+ return ENODEV;
+ }
+
+ *rpi = mbox->u.mb.un.varWords[0];
+
+ lpfc_mbuf_free(phba, dmabuff->virt, dmabuff->phys);
+ kfree(dmabuff);
+ mempool_free(mbox, phba->mbox_mem_pool);
+ return 0;
+}
+
+/**
+ * lpfcdiag_loop_self_unreg - unregs from the rpi
+ * @phba: Pointer to HBA context object
+ * @rpi: Remote port login id
+ *
+ * This function unregisters the rpi obtained in lpfcdiag_loop_self_reg
+ **/
+static int lpfcdiag_loop_self_unreg(struct lpfc_hba *phba, uint16_t rpi)
+{
+ LPFC_MBOXQ_t *mbox;
+ int status;
+
+ /* Allocate mboxq structure */
+ mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (mbox == NULL)
+ return ENOMEM;
+
+ lpfc_unreg_login(phba, 0, rpi, mbox);
+ status = lpfc_sli_issue_mbox_wait(phba, mbox, LPFC_MBOX_TMO);
+
+ if ((status != MBX_SUCCESS) || (mbox->u.mb.mbxStatus)) {
+ if (status != MBX_TIMEOUT)
+ mempool_free(mbox, phba->mbox_mem_pool);
+ return EIO;
+ }
+
+ mempool_free(mbox, phba->mbox_mem_pool);
+ return 0;
+}
+
+/**
+ * lpfcdiag_loop_get_xri - obtains the transmit and receive ids
+ * @phba: Pointer to HBA context object
+ * @rpi: Remote port login id
+ * @txxri: Pointer to transmit exchange id
+ * @rxxri: Pointer to response exchabge id
+ *
+ * This function obtains the transmit and receive ids required to send
+ * an unsolicited ct command with a payload. A special lpfc FsType and CmdRsp
+ * flags are used to the unsolicted response handler is able to process
+ * the ct command sent on the same port.
+ **/
+static int lpfcdiag_loop_get_xri(struct lpfc_hba *phba, uint16_t rpi,
+ uint16_t *txxri, uint16_t * rxxri)
+{
+ struct lpfc_bsg_event *evt;
+ struct lpfc_iocbq *cmdiocbq, *rspiocbq;
+ IOCB_t *cmd, *rsp;
+ struct lpfc_dmabuf *dmabuf;
+ struct ulp_bde64 *bpl = NULL;
+ struct lpfc_sli_ct_request *ctreq = NULL;
+ int ret_val = 0;
+ unsigned long flags;
+
+ *txxri = 0;
+ *rxxri = 0;
+ evt = lpfc_bsg_event_new(FC_REG_CT_EVENT, current->pid,
+ SLI_CT_ELX_LOOPBACK);
+ if (!evt)
+ return ENOMEM;
+
+ spin_lock_irqsave(&phba->ct_ev_lock, flags);
+ list_add(&evt->node, &phba->ct_ev_waiters);
+ lpfc_bsg_event_ref(evt);
+ spin_unlock_irqrestore(&phba->ct_ev_lock, flags);
+
+ cmdiocbq = lpfc_sli_get_iocbq(phba);
+ rspiocbq = lpfc_sli_get_iocbq(phba);
+
+ dmabuf = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
+ if (dmabuf) {
+ dmabuf->virt = lpfc_mbuf_alloc(phba, 0, &dmabuf->phys);
+ INIT_LIST_HEAD(&dmabuf->list);
+ bpl = (struct ulp_bde64 *) dmabuf->virt;
+ memset(bpl, 0, sizeof(*bpl));
+ ctreq = (struct lpfc_sli_ct_request *)(bpl + 1);
+ bpl->addrHigh =
+ le32_to_cpu(putPaddrHigh(dmabuf->phys + sizeof(*bpl)));
+ bpl->addrLow =
+ le32_to_cpu(putPaddrLow(dmabuf->phys + sizeof(*bpl)));
+ bpl->tus.f.bdeFlags = 0;
+ bpl->tus.f.bdeSize = ELX_LOOPBACK_HEADER_SZ;
+ bpl->tus.w = le32_to_cpu(bpl->tus.w);
+ }
+
+ if (cmdiocbq == NULL || rspiocbq == NULL ||
+ dmabuf == NULL || bpl == NULL || ctreq == NULL) {
+ ret_val = ENOMEM;
+ goto err_get_xri_exit;
+ }
+
+ cmd = &cmdiocbq->iocb;
+ rsp = &rspiocbq->iocb;
+
+ memset(ctreq, 0, ELX_LOOPBACK_HEADER_SZ);
+
+ ctreq->RevisionId.bits.Revision = SLI_CT_REVISION;
+ ctreq->RevisionId.bits.InId = 0;
+ ctreq->FsType = SLI_CT_ELX_LOOPBACK;
+ ctreq->FsSubType = 0;
+ ctreq->CommandResponse.bits.CmdRsp = ELX_LOOPBACK_XRI_SETUP;
+ ctreq->CommandResponse.bits.Size = 0;
+
+
+ cmd->un.xseq64.bdl.addrHigh = putPaddrHigh(dmabuf->phys);
+ cmd->un.xseq64.bdl.addrLow = putPaddrLow(dmabuf->phys);
+ cmd->un.xseq64.bdl.bdeFlags = BUFF_TYPE_BLP_64;
+ cmd->un.xseq64.bdl.bdeSize = sizeof(*bpl);
+
+ cmd->un.xseq64.w5.hcsw.Fctl = LA;
+ cmd->un.xseq64.w5.hcsw.Dfctl = 0;
+ cmd->un.xseq64.w5.hcsw.Rctl = FC_RCTL_DD_UNSOL_CTL;
+ cmd->un.xseq64.w5.hcsw.Type = FC_TYPE_CT;
+
+ cmd->ulpCommand = CMD_XMIT_SEQUENCE64_CR;
+ cmd->ulpBdeCount = 1;
+ cmd->ulpLe = 1;
+ cmd->ulpClass = CLASS3;
+ cmd->ulpContext = rpi;
+
+ cmdiocbq->iocb_flag |= LPFC_IO_LIBDFC;
+ cmdiocbq->vport = phba->pport;
+
+ ret_val = lpfc_sli_issue_iocb_wait(phba, LPFC_ELS_RING, cmdiocbq,
+ rspiocbq,
+ (phba->fc_ratov * 2)
+ + LPFC_DRVR_TIMEOUT);
+ if (ret_val)
+ goto err_get_xri_exit;
+
+ *txxri = rsp->ulpContext;
+
+ evt->waiting = 1;
+ evt->wait_time_stamp = jiffies;
+ ret_val = wait_event_interruptible_timeout(
+ evt->wq, !list_empty(&evt->events_to_see),
+ ((phba->fc_ratov * 2) + LPFC_DRVR_TIMEOUT) * HZ);
+ if (list_empty(&evt->events_to_see))
+ ret_val = (ret_val) ? EINTR : ETIMEDOUT;
+ else {
+ ret_val = IOCB_SUCCESS;
+ spin_lock_irqsave(&phba->ct_ev_lock, flags);
+ list_move(evt->events_to_see.prev, &evt->events_to_get);
+ spin_unlock_irqrestore(&phba->ct_ev_lock, flags);
+ *rxxri = (list_entry(evt->events_to_get.prev,
+ typeof(struct event_data),
+ node))->immed_dat;
+ }
+ evt->waiting = 0;
+
+err_get_xri_exit:
+ spin_lock_irqsave(&phba->ct_ev_lock, flags);
+ lpfc_bsg_event_unref(evt); /* release ref */
+ lpfc_bsg_event_unref(evt); /* delete */
+ spin_unlock_irqrestore(&phba->ct_ev_lock, flags);
+
+ if (dmabuf) {
+ if (dmabuf->virt)
+ lpfc_mbuf_free(phba, dmabuf->virt, dmabuf->phys);
+ kfree(dmabuf);
+ }
+
+ if (cmdiocbq && (ret_val != IOCB_TIMEDOUT))
+ lpfc_sli_release_iocbq(phba, cmdiocbq);
+ if (rspiocbq)
+ lpfc_sli_release_iocbq(phba, rspiocbq);
+ return ret_val;
+}
+
+/**
+ * diag_cmd_data_alloc - fills in a bde struct with dma buffers
+ * @phba: Pointer to HBA context object
+ * @bpl: Pointer to 64 bit bde structure
+ * @size: Number of bytes to process
+ * @nocopydata: Flag to copy user data into the allocated buffer
+ *
+ * This function allocates page size buffers and populates an lpfc_dmabufext.
+ * If allowed the user data pointed to with indataptr is copied into the kernel
+ * memory. The chained list of page size buffers is returned.
+ **/
+static struct lpfc_dmabufext *
+diag_cmd_data_alloc(struct lpfc_hba *phba,
+ struct ulp_bde64 *bpl, uint32_t size,
+ int nocopydata)
+{
+ struct lpfc_dmabufext *mlist = NULL;
+ struct lpfc_dmabufext *dmp;
+ int cnt, offset = 0, i = 0;
+ struct pci_dev *pcidev;
+
+ pcidev = phba->pcidev;
+
+ while (size) {
+ /* We get chunks of 4K */
+ if (size > BUF_SZ_4K)
+ cnt = BUF_SZ_4K;
+ else
+ cnt = size;
+
+ /* allocate struct lpfc_dmabufext buffer header */
+ dmp = kmalloc(sizeof(struct lpfc_dmabufext), GFP_KERNEL);
+ if (!dmp)
+ goto out;
+
+ INIT_LIST_HEAD(&dmp->dma.list);
+
+ /* Queue it to a linked list */
+ if (mlist)
+ list_add_tail(&dmp->dma.list, &mlist->dma.list);
+ else
+ mlist = dmp;
+
+ /* allocate buffer */
+ dmp->dma.virt = dma_alloc_coherent(&pcidev->dev,
+ cnt,
+ &(dmp->dma.phys),
+ GFP_KERNEL);
+
+ if (!dmp->dma.virt)
+ goto out;
+
+ dmp->size = cnt;
+
+ if (nocopydata) {
+ bpl->tus.f.bdeFlags = 0;
+ pci_dma_sync_single_for_device(phba->pcidev,
+ dmp->dma.phys, LPFC_BPL_SIZE, PCI_DMA_TODEVICE);
+
+ } else {
+ memset((uint8_t *)dmp->dma.virt, 0, cnt);
+ bpl->tus.f.bdeFlags = BUFF_TYPE_BDE_64I;
+ }
+
+ /* build buffer ptr list for IOCB */
+ bpl->addrLow = le32_to_cpu(putPaddrLow(dmp->dma.phys));
+ bpl->addrHigh = le32_to_cpu(putPaddrHigh(dmp->dma.phys));
+ bpl->tus.f.bdeSize = (ushort) cnt;
+ bpl->tus.w = le32_to_cpu(bpl->tus.w);
+ bpl++;
+
+ i++;
+ offset += cnt;
+ size -= cnt;
+ }
+
+ mlist->flag = i;
+ return mlist;
+out:
+ diag_cmd_data_free(phba, mlist);
+ return NULL;
+}
+
+/**
+ * lpfcdiag_loop_post_rxbufs - post the receive buffers for an unsol CT cmd
+ * @phba: Pointer to HBA context object
+ * @rxxri: Receive exchange id
+ * @len: Number of data bytes
+ *
+ * This function allocates and posts a data buffer of sufficient size to recieve
+ * an unsolicted CT command.
+ **/
+static int lpfcdiag_loop_post_rxbufs(struct lpfc_hba *phba, uint16_t rxxri,
+ size_t len)
+{
+ struct lpfc_sli *psli = &phba->sli;
+ struct lpfc_sli_ring *pring = &psli->ring[LPFC_ELS_RING];
+ struct lpfc_iocbq *cmdiocbq;
+ IOCB_t *cmd = NULL;
+ struct list_head head, *curr, *next;
+ struct lpfc_dmabuf *rxbmp;
+ struct lpfc_dmabuf *dmp;
+ struct lpfc_dmabuf *mp[2] = {NULL, NULL};
+ struct ulp_bde64 *rxbpl = NULL;
+ uint32_t num_bde;
+ struct lpfc_dmabufext *rxbuffer = NULL;
+ int ret_val = 0;
+ int i = 0;
+
+ cmdiocbq = lpfc_sli_get_iocbq(phba);
+ rxbmp = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
+ if (rxbmp != NULL) {
+ rxbmp->virt = lpfc_mbuf_alloc(phba, 0, &rxbmp->phys);
+ INIT_LIST_HEAD(&rxbmp->list);
+ rxbpl = (struct ulp_bde64 *) rxbmp->virt;
+ rxbuffer = diag_cmd_data_alloc(phba, rxbpl, len, 0);
+ }
+
+ if (!cmdiocbq || !rxbmp || !rxbpl || !rxbuffer) {
+ ret_val = ENOMEM;
+ goto err_post_rxbufs_exit;
+ }
+
+ /* Queue buffers for the receive exchange */
+ num_bde = (uint32_t)rxbuffer->flag;
+ dmp = &rxbuffer->dma;
+
+ cmd = &cmdiocbq->iocb;
+ i = 0;
+
+ INIT_LIST_HEAD(&head);
+ list_add_tail(&head, &dmp->list);
+ list_for_each_safe(curr, next, &head) {
+ mp[i] = list_entry(curr, struct lpfc_dmabuf, list);
+ list_del(curr);
+
+ if (phba->sli3_options & LPFC_SLI3_HBQ_ENABLED) {
+ mp[i]->buffer_tag = lpfc_sli_get_buffer_tag(phba);
+ cmd->un.quexri64cx.buff.bde.addrHigh =
+ putPaddrHigh(mp[i]->phys);
+ cmd->un.quexri64cx.buff.bde.addrLow =
+ putPaddrLow(mp[i]->phys);
+ cmd->un.quexri64cx.buff.bde.tus.f.bdeSize =
+ ((struct lpfc_dmabufext *)mp[i])->size;
+ cmd->un.quexri64cx.buff.buffer_tag = mp[i]->buffer_tag;
+ cmd->ulpCommand = CMD_QUE_XRI64_CX;
+ cmd->ulpPU = 0;
+ cmd->ulpLe = 1;
+ cmd->ulpBdeCount = 1;
+ cmd->unsli3.que_xri64cx_ext_words.ebde_count = 0;
+
+ } else {
+ cmd->un.cont64[i].addrHigh = putPaddrHigh(mp[i]->phys);
+ cmd->un.cont64[i].addrLow = putPaddrLow(mp[i]->phys);
+ cmd->un.cont64[i].tus.f.bdeSize =
+ ((struct lpfc_dmabufext *)mp[i])->size;
+ cmd->ulpBdeCount = ++i;
+
+ if ((--num_bde > 0) && (i < 2))
+ continue;
+
+ cmd->ulpCommand = CMD_QUE_XRI_BUF64_CX;
+ cmd->ulpLe = 1;
+ }
+
+ cmd->ulpClass = CLASS3;
+ cmd->ulpContext = rxxri;
+
+ ret_val = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, cmdiocbq, 0);
+
+ if (ret_val == IOCB_ERROR) {
+ diag_cmd_data_free(phba,
+ (struct lpfc_dmabufext *)mp[0]);
+ if (mp[1])
+ diag_cmd_data_free(phba,
+ (struct lpfc_dmabufext *)mp[1]);
+ dmp = list_entry(next, struct lpfc_dmabuf, list);
+ ret_val = EIO;
+ goto err_post_rxbufs_exit;
+ }
+
+ lpfc_sli_ringpostbuf_put(phba, pring, mp[0]);
+ if (mp[1]) {
+ lpfc_sli_ringpostbuf_put(phba, pring, mp[1]);
+ mp[1] = NULL;
+ }
+
+ /* The iocb was freed by lpfc_sli_issue_iocb */
+ cmdiocbq = lpfc_sli_get_iocbq(phba);
+ if (!cmdiocbq) {
+ dmp = list_entry(next, struct lpfc_dmabuf, list);
+ ret_val = EIO;
+ goto err_post_rxbufs_exit;
+ }
+
+ cmd = &cmdiocbq->iocb;
+ i = 0;
+ }
+ list_del(&head);
+
+err_post_rxbufs_exit:
+
+ if (rxbmp) {
+ if (rxbmp->virt)
+ lpfc_mbuf_free(phba, rxbmp->virt, rxbmp->phys);
+ kfree(rxbmp);
+ }
+
+ if (cmdiocbq)
+ lpfc_sli_release_iocbq(phba, cmdiocbq);
+ return ret_val;
+}
+
+/**
+ * lpfc_bsg_diag_test - with a port in loopback issues a Ct cmd to itself
+ * @job: LPFC_BSG_VENDOR_DIAG_TEST fc_bsg_job
+ *
+ * This function receives a user data buffer to be transmitted and received on
+ * the same port, the link must be up and in loopback mode prior
+ * to being called.
+ * 1. A kernel buffer is allocated to copy the user data into.
+ * 2. The port registers with "itself".
+ * 3. The transmit and receive exchange ids are obtained.
+ * 4. The receive exchange id is posted.
+ * 5. A new els loopback event is created.
+ * 6. The command and response iocbs are allocated.
+ * 7. The cmd iocb FsType is set to elx loopback and the CmdRsp to looppback.
+ *
+ * This function is meant to be called n times while the port is in loopback
+ * so it is the apps responsibility to issue a reset to take the port out
+ * of loopback mode.
+ **/
+static int
+lpfc_bsg_diag_test(struct fc_bsg_job *job)
+{
+ struct lpfc_vport *vport = (struct lpfc_vport *)job->shost->hostdata;
+ struct lpfc_hba *phba = vport->phba;
+ struct diag_mode_test *diag_mode;
+ struct lpfc_bsg_event *evt;
+ struct event_data *evdat;
+ struct lpfc_sli *psli = &phba->sli;
+ uint32_t size;
+ uint32_t full_size;
+ size_t segment_len = 0, segment_offset = 0, current_offset = 0;
+ uint16_t rpi;
+ struct lpfc_iocbq *cmdiocbq, *rspiocbq;
+ IOCB_t *cmd, *rsp;
+ struct lpfc_sli_ct_request *ctreq;
+ struct lpfc_dmabuf *txbmp;
+ struct ulp_bde64 *txbpl = NULL;
+ struct lpfc_dmabufext *txbuffer = NULL;
+ struct list_head head;
+ struct lpfc_dmabuf *curr;
+ uint16_t txxri, rxxri;
+ uint32_t num_bde;
+ uint8_t *ptr = NULL, *rx_databuf = NULL;
+ int rc = 0;
+ unsigned long flags;
+ void *dataout = NULL;
+ uint32_t total_mem;
+
+ /* in case no data is returned return just the return code */
+ job->reply->reply_payload_rcv_len = 0;
+
+ if (job->request_len <
+ sizeof(struct fc_bsg_request) + sizeof(struct diag_mode_test)) {
+ lpfc_printf_log(phba, KERN_WARNING, LOG_LIBDFC,
+ "2739 Received DIAG TEST request below minimum "
+ "size\n");
+ rc = -EINVAL;
+ goto loopback_test_exit;
+ }
+
+ if (job->request_payload.payload_len !=
+ job->reply_payload.payload_len) {
+ rc = -EINVAL;
+ goto loopback_test_exit;
+ }
+
+ diag_mode = (struct diag_mode_test *)
+ job->request->rqst_data.h_vendor.vendor_cmd;
+
+ if ((phba->link_state == LPFC_HBA_ERROR) ||
+ (psli->sli_flag & LPFC_BLOCK_MGMT_IO) ||
+ (!(psli->sli_flag & LPFC_SLI_ACTIVE))) {
+ rc = -EACCES;
+ goto loopback_test_exit;
+ }
+
+ if (!lpfc_is_link_up(phba) || !(phba->link_flag & LS_LOOPBACK_MODE)) {
+ rc = -EACCES;
+ goto loopback_test_exit;
+ }
+
+ size = job->request_payload.payload_len;
+ full_size = size + ELX_LOOPBACK_HEADER_SZ; /* plus the header */
+
+ if ((size == 0) || (size > 80 * BUF_SZ_4K)) {
+ rc = -ERANGE;
+ goto loopback_test_exit;
+ }
+
+ if (size >= BUF_SZ_4K) {
+ /*
+ * Allocate memory for ioctl data. If buffer is bigger than 64k,
+ * then we allocate 64k and re-use that buffer over and over to
+ * xfer the whole block. This is because Linux kernel has a
+ * problem allocating more than 120k of kernel space memory. Saw
+ * problem with GET_FCPTARGETMAPPING...
+ */
+ if (size <= (64 * 1024))
+ total_mem = size;
+ else
+ total_mem = 64 * 1024;
+ } else
+ /* Allocate memory for ioctl data */
+ total_mem = BUF_SZ_4K;
+
+ dataout = kmalloc(total_mem, GFP_KERNEL);
+ if (dataout == NULL) {
+ rc = -ENOMEM;
+ goto loopback_test_exit;
+ }
+
+ ptr = dataout;
+ ptr += ELX_LOOPBACK_HEADER_SZ;
+ sg_copy_to_buffer(job->request_payload.sg_list,
+ job->request_payload.sg_cnt,
+ ptr, size);
+
+ rc = lpfcdiag_loop_self_reg(phba, &rpi);
+ if (rc) {
+ rc = -ENOMEM;
+ goto loopback_test_exit;
+ }
+
+ rc = lpfcdiag_loop_get_xri(phba, rpi, &txxri, &rxxri);
+ if (rc) {
+ lpfcdiag_loop_self_unreg(phba, rpi);
+ rc = -ENOMEM;
+ goto loopback_test_exit;
+ }
+
+ rc = lpfcdiag_loop_post_rxbufs(phba, rxxri, full_size);
+ if (rc) {
+ lpfcdiag_loop_self_unreg(phba, rpi);
+ rc = -ENOMEM;
+ goto loopback_test_exit;
+ }
+
+ evt = lpfc_bsg_event_new(FC_REG_CT_EVENT, current->pid,
+ SLI_CT_ELX_LOOPBACK);
+ if (!evt) {
+ lpfcdiag_loop_self_unreg(phba, rpi);
+ rc = -ENOMEM;
+ goto loopback_test_exit;
+ }
+
+ spin_lock_irqsave(&phba->ct_ev_lock, flags);
+ list_add(&evt->node, &phba->ct_ev_waiters);
+ lpfc_bsg_event_ref(evt);
+ spin_unlock_irqrestore(&phba->ct_ev_lock, flags);
+
+ cmdiocbq = lpfc_sli_get_iocbq(phba);
+ rspiocbq = lpfc_sli_get_iocbq(phba);
+ txbmp = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
+
+ if (txbmp) {
+ txbmp->virt = lpfc_mbuf_alloc(phba, 0, &txbmp->phys);
+ INIT_LIST_HEAD(&txbmp->list);
+ txbpl = (struct ulp_bde64 *) txbmp->virt;
+ if (txbpl)
+ txbuffer = diag_cmd_data_alloc(phba,
+ txbpl, full_size, 0);
+ }
+
+ if (!cmdiocbq || !rspiocbq || !txbmp || !txbpl || !txbuffer) {
+ rc = -ENOMEM;
+ goto err_loopback_test_exit;
+ }
+
+ cmd = &cmdiocbq->iocb;
+ rsp = &rspiocbq->iocb;
+
+ INIT_LIST_HEAD(&head);
+ list_add_tail(&head, &txbuffer->dma.list);
+ list_for_each_entry(curr, &head, list) {
+ segment_len = ((struct lpfc_dmabufext *)curr)->size;
+ if (current_offset == 0) {
+ ctreq = curr->virt;
+ memset(ctreq, 0, ELX_LOOPBACK_HEADER_SZ);
+ ctreq->RevisionId.bits.Revision = SLI_CT_REVISION;
+ ctreq->RevisionId.bits.InId = 0;
+ ctreq->FsType = SLI_CT_ELX_LOOPBACK;
+ ctreq->FsSubType = 0;
+ ctreq->CommandResponse.bits.CmdRsp = ELX_LOOPBACK_DATA;
+ ctreq->CommandResponse.bits.Size = size;
+ segment_offset = ELX_LOOPBACK_HEADER_SZ;
+ } else
+ segment_offset = 0;
+
+ BUG_ON(segment_offset >= segment_len);
+ memcpy(curr->virt + segment_offset,
+ ptr + current_offset,
+ segment_len - segment_offset);
+
+ current_offset += segment_len - segment_offset;
+ BUG_ON(current_offset > size);
+ }
+ list_del(&head);
+
+ /* Build the XMIT_SEQUENCE iocb */
+
+ num_bde = (uint32_t)txbuffer->flag;
+
+ cmd->un.xseq64.bdl.addrHigh = putPaddrHigh(txbmp->phys);
+ cmd->un.xseq64.bdl.addrLow = putPaddrLow(txbmp->phys);
+ cmd->un.xseq64.bdl.bdeFlags = BUFF_TYPE_BLP_64;
+ cmd->un.xseq64.bdl.bdeSize = (num_bde * sizeof(struct ulp_bde64));
+
+ cmd->un.xseq64.w5.hcsw.Fctl = (LS | LA);
+ cmd->un.xseq64.w5.hcsw.Dfctl = 0;
+ cmd->un.xseq64.w5.hcsw.Rctl = FC_RCTL_DD_UNSOL_CTL;
+ cmd->un.xseq64.w5.hcsw.Type = FC_TYPE_CT;
+
+ cmd->ulpCommand = CMD_XMIT_SEQUENCE64_CX;
+ cmd->ulpBdeCount = 1;
+ cmd->ulpLe = 1;
+ cmd->ulpClass = CLASS3;
+ cmd->ulpContext = txxri;
+
+ cmdiocbq->iocb_flag |= LPFC_IO_LIBDFC;
+ cmdiocbq->vport = phba->pport;
+
+ rc = lpfc_sli_issue_iocb_wait(phba, LPFC_ELS_RING, cmdiocbq, rspiocbq,
+ (phba->fc_ratov * 2) + LPFC_DRVR_TIMEOUT);
+
+ if ((rc != IOCB_SUCCESS) || (rsp->ulpStatus != IOCB_SUCCESS)) {
+ rc = -EIO;
+ goto err_loopback_test_exit;
+ }
+
+ evt->waiting = 1;
+ rc = wait_event_interruptible_timeout(
+ evt->wq, !list_empty(&evt->events_to_see),
+ ((phba->fc_ratov * 2) + LPFC_DRVR_TIMEOUT) * HZ);
+ evt->waiting = 0;
+ if (list_empty(&evt->events_to_see))
+ rc = (rc) ? -EINTR : -ETIMEDOUT;
+ else {
+ spin_lock_irqsave(&phba->ct_ev_lock, flags);
+ list_move(evt->events_to_see.prev, &evt->events_to_get);
+ evdat = list_entry(evt->events_to_get.prev,
+ typeof(*evdat), node);
+ spin_unlock_irqrestore(&phba->ct_ev_lock, flags);
+ rx_databuf = evdat->data;
+ if (evdat->len != full_size) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_LIBDFC,
+ "1603 Loopback test did not receive expected "
+ "data length. actual length 0x%x expected "
+ "length 0x%x\n",
+ evdat->len, full_size);
+ rc = -EIO;
+ } else if (rx_databuf == NULL)
+ rc = -EIO;
+ else {
+ rc = IOCB_SUCCESS;
+ /* skip over elx loopback header */
+ rx_databuf += ELX_LOOPBACK_HEADER_SZ;
+ job->reply->reply_payload_rcv_len =
+ sg_copy_from_buffer(job->reply_payload.sg_list,
+ job->reply_payload.sg_cnt,
+ rx_databuf, size);
+ job->reply->reply_payload_rcv_len = size;
+ }
+ }
+
+err_loopback_test_exit:
+ lpfcdiag_loop_self_unreg(phba, rpi);
+
+ spin_lock_irqsave(&phba->ct_ev_lock, flags);
+ lpfc_bsg_event_unref(evt); /* release ref */
+ lpfc_bsg_event_unref(evt); /* delete */
+ spin_unlock_irqrestore(&phba->ct_ev_lock, flags);
+
+ if (cmdiocbq != NULL)
+ lpfc_sli_release_iocbq(phba, cmdiocbq);
+
+ if (rspiocbq != NULL)
+ lpfc_sli_release_iocbq(phba, rspiocbq);
+
+ if (txbmp != NULL) {
+ if (txbpl != NULL) {
+ if (txbuffer != NULL)
+ diag_cmd_data_free(phba, txbuffer);
+ lpfc_mbuf_free(phba, txbmp->virt, txbmp->phys);
+ }
+ kfree(txbmp);
+ }
+
+loopback_test_exit:
+ kfree(dataout);
+ /* make error code available to userspace */
+ job->reply->result = rc;
+ job->dd_data = NULL;
+ /* complete the job back to userspace if no error */
+ if (rc == 0)
+ job->job_done(job);
+ return rc;
+}
+
+/**
+ * lpfc_bsg_get_dfc_rev - process a GET_DFC_REV bsg vendor command
+ * @job: GET_DFC_REV fc_bsg_job
+ **/
+static int
+lpfc_bsg_get_dfc_rev(struct fc_bsg_job *job)
+{
+ struct lpfc_vport *vport = (struct lpfc_vport *)job->shost->hostdata;
+ struct lpfc_hba *phba = vport->phba;
+ struct get_mgmt_rev *event_req;
+ struct get_mgmt_rev_reply *event_reply;
+ int rc = 0;
+
+ if (job->request_len <
+ sizeof(struct fc_bsg_request) + sizeof(struct get_mgmt_rev)) {
+ lpfc_printf_log(phba, KERN_WARNING, LOG_LIBDFC,
+ "2740 Received GET_DFC_REV request below "
+ "minimum size\n");
+ rc = -EINVAL;
+ goto job_error;
+ }
+
+ event_req = (struct get_mgmt_rev *)
+ job->request->rqst_data.h_vendor.vendor_cmd;
+
+ event_reply = (struct get_mgmt_rev_reply *)
+ job->reply->reply_data.vendor_reply.vendor_rsp;
+
+ if (job->reply_len <
+ sizeof(struct fc_bsg_request) + sizeof(struct get_mgmt_rev_reply)) {
+ lpfc_printf_log(phba, KERN_WARNING, LOG_LIBDFC,
+ "2741 Received GET_DFC_REV reply below "
+ "minimum size\n");
+ rc = -EINVAL;
+ goto job_error;
+ }
+
+ event_reply->info.a_Major = MANAGEMENT_MAJOR_REV;
+ event_reply->info.a_Minor = MANAGEMENT_MINOR_REV;
+job_error:
+ job->reply->result = rc;
+ if (rc == 0)
+ job->job_done(job);
+ return rc;
+}
+
+/**
+ * lpfc_bsg_wake_mbox_wait - lpfc_bsg_issue_mbox mbox completion handler
+ * @phba: Pointer to HBA context object.
+ * @pmboxq: Pointer to mailbox command.
+ *
+ * This is completion handler function for mailbox commands issued from
+ * lpfc_bsg_issue_mbox function. This function is called by the
+ * mailbox event handler function with no lock held. This function
+ * will wake up thread waiting on the wait queue pointed by context1
+ * of the mailbox.
+ **/
+void
+lpfc_bsg_wake_mbox_wait(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq)
+{
+ struct bsg_job_data *dd_data;
+ MAILBOX_t *pmb;
+ MAILBOX_t *mb;
+ struct fc_bsg_job *job;
+ uint32_t size;
+ unsigned long flags;
+
+ spin_lock_irqsave(&phba->ct_ev_lock, flags);
+ dd_data = pmboxq->context1;
+ if (!dd_data) {
+ spin_unlock_irqrestore(&phba->ct_ev_lock, flags);
+ return;
+ }
+
+ pmb = &dd_data->context_un.mbox.pmboxq->u.mb;
+ mb = dd_data->context_un.mbox.mb;
+ job = dd_data->context_un.mbox.set_job;
+ memcpy(mb, pmb, sizeof(*pmb));
+ size = job->request_payload.payload_len;
+ job->reply->reply_payload_rcv_len =
+ sg_copy_from_buffer(job->reply_payload.sg_list,
+ job->reply_payload.sg_cnt,
+ mb, size);
+ job->reply->result = 0;
+ dd_data->context_un.mbox.set_job = NULL;
+ job->dd_data = NULL;
+ job->job_done(job);
+ spin_unlock_irqrestore(&phba->ct_ev_lock, flags);
+ mempool_free(dd_data->context_un.mbox.pmboxq, phba->mbox_mem_pool);
+ kfree(mb);
+ kfree(dd_data);
+ return;
+}
+
+/**
+ * lpfc_bsg_check_cmd_access - test for a supported mailbox command
+ * @phba: Pointer to HBA context object.
+ * @mb: Pointer to a mailbox object.
+ * @vport: Pointer to a vport object.
+ *
+ * Some commands require the port to be offline, some may not be called from
+ * the application.
+ **/
+static int lpfc_bsg_check_cmd_access(struct lpfc_hba *phba,
+ MAILBOX_t *mb, struct lpfc_vport *vport)
+{
+ /* return negative error values for bsg job */
+ switch (mb->mbxCommand) {
+ /* Offline only */
+ case MBX_INIT_LINK:
+ case MBX_DOWN_LINK:
+ case MBX_CONFIG_LINK:
+ case MBX_CONFIG_RING:
+ case MBX_RESET_RING:
+ case MBX_UNREG_LOGIN:
+ case MBX_CLEAR_LA:
+ case MBX_DUMP_CONTEXT:
+ case MBX_RUN_DIAGS:
+ case MBX_RESTART:
+ case MBX_SET_MASK:
+ if (!(vport->fc_flag & FC_OFFLINE_MODE)) {
+ lpfc_printf_log(phba, KERN_WARNING, LOG_LIBDFC,
+ "2743 Command 0x%x is illegal in on-line "
+ "state\n",
+ mb->mbxCommand);
+ return -EPERM;
+ }
+ case MBX_WRITE_NV:
+ case MBX_WRITE_VPARMS:
+ case MBX_LOAD_SM:
+ case MBX_READ_NV:
+ case MBX_READ_CONFIG:
+ case MBX_READ_RCONFIG:
+ case MBX_READ_STATUS:
+ case MBX_READ_XRI:
+ case MBX_READ_REV:
+ case MBX_READ_LNK_STAT:
+ case MBX_DUMP_MEMORY:
+ case MBX_DOWN_LOAD:
+ case MBX_UPDATE_CFG:
+ case MBX_KILL_BOARD:
+ case MBX_LOAD_AREA:
+ case MBX_LOAD_EXP_ROM:
+ case MBX_BEACON:
+ case MBX_DEL_LD_ENTRY:
+ case MBX_SET_DEBUG:
+ case MBX_WRITE_WWN:
+ case MBX_SLI4_CONFIG:
+ case MBX_READ_EVENT_LOG_STATUS:
+ case MBX_WRITE_EVENT_LOG:
+ case MBX_PORT_CAPABILITIES:
+ case MBX_PORT_IOV_CONTROL:
+ break;
+ case MBX_SET_VARIABLE:
+ case MBX_RUN_BIU_DIAG64:
+ case MBX_READ_EVENT_LOG:
+ case MBX_READ_SPARM64:
+ case MBX_READ_LA:
+ case MBX_READ_LA64:
+ case MBX_REG_LOGIN:
+ case MBX_REG_LOGIN64:
+ case MBX_CONFIG_PORT:
+ case MBX_RUN_BIU_DIAG:
+ default:
+ lpfc_printf_log(phba, KERN_WARNING, LOG_LIBDFC,
+ "2742 Unknown Command 0x%x\n",
+ mb->mbxCommand);
+ return -EPERM;
+ }
+
+ return 0; /* ok */
+}
+
+/**
+ * lpfc_bsg_issue_mbox - issues a mailbox command on behalf of an app
+ * @phba: Pointer to HBA context object.
+ * @mb: Pointer to a mailbox object.
+ * @vport: Pointer to a vport object.
+ *
+ * Allocate a tracking object, mailbox command memory, get a mailbox
+ * from the mailbox pool, copy the caller mailbox command.
+ *
+ * If offline and the sli is active we need to poll for the command (port is
+ * being reset) and com-plete the job, otherwise issue the mailbox command and
+ * let our completion handler finish the command.
+ **/
+static uint32_t
+lpfc_bsg_issue_mbox(struct lpfc_hba *phba, struct fc_bsg_job *job,
+ struct lpfc_vport *vport)
+{
+ LPFC_MBOXQ_t *pmboxq;
+ MAILBOX_t *pmb;
+ MAILBOX_t *mb;
+ struct bsg_job_data *dd_data;
+ uint32_t size;
+ int rc = 0;
+
+ /* allocate our bsg tracking structure */
+ dd_data = kmalloc(sizeof(struct bsg_job_data), GFP_KERNEL);
+ if (!dd_data) {
+ lpfc_printf_log(phba, KERN_WARNING, LOG_LIBDFC,
+ "2727 Failed allocation of dd_data\n");
+ return -ENOMEM;
+ }
+
+ mb = kzalloc(PAGE_SIZE, GFP_KERNEL);
+ if (!mb) {
+ kfree(dd_data);
+ return -ENOMEM;
+ }
+
+ pmboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!pmboxq) {
+ kfree(dd_data);
+ kfree(mb);
+ return -ENOMEM;
+ }
+
+ size = job->request_payload.payload_len;
+ job->reply->reply_payload_rcv_len =
+ sg_copy_to_buffer(job->request_payload.sg_list,
+ job->request_payload.sg_cnt,
+ mb, size);
+
+ rc = lpfc_bsg_check_cmd_access(phba, mb, vport);
+ if (rc != 0) {
+ kfree(dd_data);
+ kfree(mb);
+ mempool_free(pmboxq, phba->mbox_mem_pool);
+ return rc; /* must be negative */
+ }
+
+ memset(pmboxq, 0, sizeof(LPFC_MBOXQ_t));
+ pmb = &pmboxq->u.mb;
+ memcpy(pmb, mb, sizeof(*pmb));
+ pmb->mbxOwner = OWN_HOST;
+ pmboxq->context1 = NULL;
+ pmboxq->vport = vport;
+
+ if ((vport->fc_flag & FC_OFFLINE_MODE) ||
+ (!(phba->sli.sli_flag & LPFC_SLI_ACTIVE))) {
+ rc = lpfc_sli_issue_mbox(phba, pmboxq, MBX_POLL);
+ if (rc != MBX_SUCCESS) {
+ if (rc != MBX_TIMEOUT) {
+ kfree(dd_data);
+ kfree(mb);
+ mempool_free(pmboxq, phba->mbox_mem_pool);
+ }
+ return (rc == MBX_TIMEOUT) ? -ETIME : -ENODEV;
+ }
+
+ memcpy(mb, pmb, sizeof(*pmb));
+ job->reply->reply_payload_rcv_len =
+ sg_copy_from_buffer(job->reply_payload.sg_list,
+ job->reply_payload.sg_cnt,
+ mb, size);
+ kfree(dd_data);
+ kfree(mb);
+ mempool_free(pmboxq, phba->mbox_mem_pool);
+ /* not waiting mbox already done */
+ return 0;
+ }
+
+ /* setup wake call as IOCB callback */
+ pmboxq->mbox_cmpl = lpfc_bsg_wake_mbox_wait;
+ /* setup context field to pass wait_queue pointer to wake function */
+ pmboxq->context1 = dd_data;
+ dd_data->type = TYPE_MBOX;
+ dd_data->context_un.mbox.pmboxq = pmboxq;
+ dd_data->context_un.mbox.mb = mb;
+ dd_data->context_un.mbox.set_job = job;
+ job->dd_data = dd_data;
+ rc = lpfc_sli_issue_mbox(phba, pmboxq, MBX_NOWAIT);
+ if ((rc != MBX_SUCCESS) && (rc != MBX_BUSY)) {
+ kfree(dd_data);
+ kfree(mb);
+ mempool_free(pmboxq, phba->mbox_mem_pool);
+ return -EIO;
+ }
+
+ return 1;
+}
+
+/**
+ * lpfc_bsg_mbox_cmd - process an fc bsg LPFC_BSG_VENDOR_MBOX command
+ * @job: MBOX fc_bsg_job for LPFC_BSG_VENDOR_MBOX.
+ **/
+static int
+lpfc_bsg_mbox_cmd(struct fc_bsg_job *job)
+{
+ struct lpfc_vport *vport = (struct lpfc_vport *)job->shost->hostdata;
+ struct lpfc_hba *phba = vport->phba;
+ int rc = 0;
+
+ /* in case no data is transferred */
+ job->reply->reply_payload_rcv_len = 0;
+ if (job->request_len <
+ sizeof(struct fc_bsg_request) + sizeof(struct dfc_mbox_req)) {
+ lpfc_printf_log(phba, KERN_WARNING, LOG_LIBDFC,
+ "2737 Received MBOX_REQ request below "
+ "minimum size\n");
+ rc = -EINVAL;
+ goto job_error;
+ }
+
+ if (job->request_payload.payload_len != PAGE_SIZE) {
+ rc = -EINVAL;
+ goto job_error;
+ }
+
+ if (phba->sli.sli_flag & LPFC_BLOCK_MGMT_IO) {
+ rc = -EAGAIN;
+ goto job_error;
+ }
+
+ rc = lpfc_bsg_issue_mbox(phba, job, vport);
+
+job_error:
+ if (rc == 0) {
+ /* job done */
+ job->reply->result = 0;
+ job->dd_data = NULL;
+ job->job_done(job);
+ } else if (rc == 1)
+ /* job submitted, will complete later*/
+ rc = 0; /* return zero, no error */
+ else {
+ /* some error occurred */
+ job->reply->result = rc;
+ job->dd_data = NULL;
+ }
return rc;
}
@@ -834,38 +2640,57 @@
/**
* lpfc_bsg_hst_vendor - process a vendor-specific fc_bsg_job
* @job: fc_bsg_job to handle
- */
+ **/
static int
lpfc_bsg_hst_vendor(struct fc_bsg_job *job)
{
int command = job->request->rqst_data.h_vendor.vendor_cmd[0];
+ int rc;
switch (command) {
case LPFC_BSG_VENDOR_SET_CT_EVENT:
- return lpfc_bsg_set_event(job);
+ rc = lpfc_bsg_hba_set_event(job);
break;
-
case LPFC_BSG_VENDOR_GET_CT_EVENT:
- return lpfc_bsg_get_event(job);
+ rc = lpfc_bsg_hba_get_event(job);
break;
-
+ case LPFC_BSG_VENDOR_SEND_MGMT_RESP:
+ rc = lpfc_bsg_send_mgmt_rsp(job);
+ break;
+ case LPFC_BSG_VENDOR_DIAG_MODE:
+ rc = lpfc_bsg_diag_mode(job);
+ break;
+ case LPFC_BSG_VENDOR_DIAG_TEST:
+ rc = lpfc_bsg_diag_test(job);
+ break;
+ case LPFC_BSG_VENDOR_GET_MGMT_REV:
+ rc = lpfc_bsg_get_dfc_rev(job);
+ break;
+ case LPFC_BSG_VENDOR_MBOX:
+ rc = lpfc_bsg_mbox_cmd(job);
+ break;
default:
- return -EINVAL;
+ rc = -EINVAL;
+ job->reply->reply_payload_rcv_len = 0;
+ /* make error code available to userspace */
+ job->reply->result = rc;
+ break;
}
+
+ return rc;
}
/**
* lpfc_bsg_request - handle a bsg request from the FC transport
* @job: fc_bsg_job to handle
- */
+ **/
int
lpfc_bsg_request(struct fc_bsg_job *job)
{
uint32_t msgcode;
- int rc = -EINVAL;
+ int rc;
msgcode = job->request->msgcode;
-
switch (msgcode) {
case FC_BSG_HST_VENDOR:
rc = lpfc_bsg_hst_vendor(job);
@@ -874,9 +2699,13 @@
rc = lpfc_bsg_rport_els(job);
break;
case FC_BSG_RPT_CT:
- rc = lpfc_bsg_rport_ct(job);
+ rc = lpfc_bsg_send_mgmt_cmd(job);
break;
default:
+ rc = -EINVAL;
+ job->reply->reply_payload_rcv_len = 0;
+ /* make error code available to userspace */
+ job->reply->result = rc;
break;
}
@@ -889,17 +2718,71 @@
*
* This function just aborts the job's IOCB. The aborted IOCB will return to
* the waiting function which will handle passing the error back to userspace
- */
+ **/
int
lpfc_bsg_timeout(struct fc_bsg_job *job)
{
struct lpfc_vport *vport = (struct lpfc_vport *)job->shost->hostdata;
struct lpfc_hba *phba = vport->phba;
- struct lpfc_iocbq *cmdiocb = (struct lpfc_iocbq *)job->dd_data;
+ struct lpfc_iocbq *cmdiocb;
+ struct lpfc_bsg_event *evt;
+ struct lpfc_bsg_iocb *iocb;
+ struct lpfc_bsg_mbox *mbox;
struct lpfc_sli_ring *pring = &phba->sli.ring[LPFC_ELS_RING];
+ struct bsg_job_data *dd_data;
+ unsigned long flags;
- if (cmdiocb)
+ spin_lock_irqsave(&phba->ct_ev_lock, flags);
+ dd_data = (struct bsg_job_data *)job->dd_data;
+ /* timeout and completion crossed paths if no dd_data */
+ if (!dd_data) {
+ spin_unlock_irqrestore(&phba->ct_ev_lock, flags);
+ return 0;
+ }
+
+ switch (dd_data->type) {
+ case TYPE_IOCB:
+ iocb = &dd_data->context_un.iocb;
+ cmdiocb = iocb->cmdiocbq;
+ /* hint to completion handler that the job timed out */
+ job->reply->result = -EAGAIN;
+ spin_unlock_irqrestore(&phba->ct_ev_lock, flags);
+ /* this will call our completion handler */
+ spin_lock_irq(&phba->hbalock);
lpfc_sli_issue_abort_iotag(phba, pring, cmdiocb);
+ spin_unlock_irq(&phba->hbalock);
+ break;
+ case TYPE_EVT:
+ evt = dd_data->context_un.evt;
+ /* this event has no job anymore */
+ evt->set_job = NULL;
+ job->dd_data = NULL;
+ job->reply->reply_payload_rcv_len = 0;
+ /* Return -EAGAIN which is our way of signallying the
+ * app to retry.
+ */
+ job->reply->result = -EAGAIN;
+ spin_unlock_irqrestore(&phba->ct_ev_lock, flags);
+ job->job_done(job);
+ break;
+ case TYPE_MBOX:
+ mbox = &dd_data->context_un.mbox;
+ /* this mbox has no job anymore */
+ mbox->set_job = NULL;
+ job->dd_data = NULL;
+ job->reply->reply_payload_rcv_len = 0;
+ job->reply->result = -EAGAIN;
+ spin_unlock_irqrestore(&phba->ct_ev_lock, flags);
+ job->job_done(job);
+ break;
+ default:
+ spin_unlock_irqrestore(&phba->ct_ev_lock, flags);
+ break;
+ }
+ /* scsi transport fc fc_bsg_job_timeout expects a zero return code,
+ * otherwise an error message will be displayed on the console
+ * so always return success (zero)
+ */
return 0;
}
diff --git a/drivers/scsi/lpfc/lpfc_bsg.h b/drivers/scsi/lpfc/lpfc_bsg.h
new file mode 100644
index 0000000..6c8f87e
--- /dev/null
+++ b/drivers/scsi/lpfc/lpfc_bsg.h
@@ -0,0 +1,98 @@
+/*******************************************************************
+ * This file is part of the Emulex Linux Device Driver for *
+ * Fibre Channel Host Bus Adapters. *
+ * Copyright (C) 2010 Emulex. All rights reserved. *
+ * EMULEX and SLI are trademarks of Emulex. *
+ * www.emulex.com *
+ * *
+ * This program is free software; you can redistribute it and/or *
+ * modify it under the terms of version 2 of the GNU General *
+ * Public License as published by the Free Software Foundation. *
+ * This program is distributed in the hope that it will be useful. *
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND *
+ * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, *
+ * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE *
+ * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
+ * TO BE LEGALLY INVALID. See the GNU General Public License for *
+ * more details, a copy of which can be found in the file COPYING *
+ * included with this package. *
+ *******************************************************************/
+/* bsg definitions
+ * No pointers to user data are allowed, all application buffers and sizes will
+ * derived through the bsg interface.
+ *
+ * These are the vendor unique structures passed in using the bsg
+ * FC_BSG_HST_VENDOR message code type.
+ */
+#define LPFC_BSG_VENDOR_SET_CT_EVENT 1
+#define LPFC_BSG_VENDOR_GET_CT_EVENT 2
+#define LPFC_BSG_VENDOR_SEND_MGMT_RESP 3
+#define LPFC_BSG_VENDOR_DIAG_MODE 4
+#define LPFC_BSG_VENDOR_DIAG_TEST 5
+#define LPFC_BSG_VENDOR_GET_MGMT_REV 6
+#define LPFC_BSG_VENDOR_MBOX 7
+
+struct set_ct_event {
+ uint32_t command;
+ uint32_t type_mask;
+ uint32_t ev_req_id;
+ uint32_t ev_reg_id;
+};
+
+struct get_ct_event {
+ uint32_t command;
+ uint32_t ev_reg_id;
+ uint32_t ev_req_id;
+};
+
+struct get_ct_event_reply {
+ uint32_t immed_data;
+ uint32_t type;
+};
+
+struct send_mgmt_resp {
+ uint32_t command;
+ uint32_t tag;
+};
+
+
+#define INTERNAL_LOOP_BACK 0x1 /* adapter short cuts the loop internally */
+#define EXTERNAL_LOOP_BACK 0x2 /* requires an external loopback plug */
+
+struct diag_mode_set {
+ uint32_t command;
+ uint32_t type;
+ uint32_t timeout;
+};
+
+struct diag_mode_test {
+ uint32_t command;
+};
+
+#define LPFC_WWNN_TYPE 0
+#define LPFC_WWPN_TYPE 1
+
+struct get_mgmt_rev {
+ uint32_t command;
+};
+
+#define MANAGEMENT_MAJOR_REV 1
+#define MANAGEMENT_MINOR_REV 0
+
+/* the MgmtRevInfo structure */
+struct MgmtRevInfo {
+ uint32_t a_Major;
+ uint32_t a_Minor;
+};
+
+struct get_mgmt_rev_reply {
+ struct MgmtRevInfo info;
+};
+
+struct dfc_mbox_req {
+ uint32_t command;
+ uint32_t inExtWLen;
+ uint32_t outExtWLen;
+ uint8_t mbOffset;
+};
+
diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h
index 650494d..6f0fb51 100644
--- a/drivers/scsi/lpfc/lpfc_crtn.h
+++ b/drivers/scsi/lpfc/lpfc_crtn.h
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2008 Emulex. All rights reserved. *
+ * Copyright (C) 2004-2010 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* *
@@ -44,18 +44,26 @@
void lpfc_unreg_login(struct lpfc_hba *, uint16_t, uint32_t, LPFC_MBOXQ_t *);
void lpfc_unreg_did(struct lpfc_hba *, uint16_t, uint32_t, LPFC_MBOXQ_t *);
void lpfc_reg_vpi(struct lpfc_vport *, LPFC_MBOXQ_t *);
+void lpfc_register_new_vport(struct lpfc_hba *, struct lpfc_vport *,
+ struct lpfc_nodelist *);
void lpfc_unreg_vpi(struct lpfc_hba *, uint16_t, LPFC_MBOXQ_t *);
void lpfc_init_link(struct lpfc_hba *, LPFC_MBOXQ_t *, uint32_t, uint32_t);
void lpfc_request_features(struct lpfc_hba *, struct lpfcMboxq *);
+void lpfc_supported_pages(struct lpfcMboxq *);
+void lpfc_sli4_params(struct lpfcMboxq *);
+int lpfc_pc_sli4_params_get(struct lpfc_hba *, LPFC_MBOXQ_t *);
struct lpfc_vport *lpfc_find_vport_by_did(struct lpfc_hba *, uint32_t);
void lpfc_cleanup_rcv_buffers(struct lpfc_vport *);
void lpfc_rcv_seq_check_edtov(struct lpfc_vport *);
void lpfc_cleanup_rpis(struct lpfc_vport *, int);
+void lpfc_cleanup_pending_mbox(struct lpfc_vport *);
int lpfc_linkdown(struct lpfc_hba *);
void lpfc_linkdown_port(struct lpfc_vport *);
void lpfc_port_link_failure(struct lpfc_vport *);
void lpfc_mbx_cmpl_read_la(struct lpfc_hba *, LPFC_MBOXQ_t *);
+void lpfc_init_vpi_cmpl(struct lpfc_hba *, LPFC_MBOXQ_t *);
+void lpfc_retry_pport_discovery(struct lpfc_hba *);
void lpfc_mbx_cmpl_reg_login(struct lpfc_hba *, LPFC_MBOXQ_t *);
void lpfc_mbx_cmpl_dflt_rpi(struct lpfc_hba *, LPFC_MBOXQ_t *);
@@ -73,6 +81,7 @@
int lpfc_can_disctmo(struct lpfc_vport *);
int lpfc_unreg_rpi(struct lpfc_vport *, struct lpfc_nodelist *);
void lpfc_unreg_all_rpis(struct lpfc_vport *);
+void lpfc_unreg_hba_rpis(struct lpfc_hba *);
void lpfc_unreg_default_rpis(struct lpfc_vport *);
void lpfc_issue_reg_vpi(struct lpfc_hba *, struct lpfc_vport *);
@@ -99,7 +108,7 @@
void lpfc_do_scr_ns_plogi(struct lpfc_hba *, struct lpfc_vport *);
int lpfc_check_sparm(struct lpfc_vport *, struct lpfc_nodelist *,
- struct serv_parm *, uint32_t);
+ struct serv_parm *, uint32_t, int);
int lpfc_els_abort(struct lpfc_hba *, struct lpfc_nodelist *);
void lpfc_more_plogi(struct lpfc_vport *);
void lpfc_more_adisc(struct lpfc_vport *);
@@ -197,6 +206,7 @@
void lpfc_unreg_fcfi(struct lpfcMboxq *, uint16_t);
void lpfc_resume_rpi(struct lpfcMboxq *, struct lpfc_nodelist *);
int lpfc_check_pending_fcoe_event(struct lpfc_hba *, uint8_t);
+void lpfc_issue_init_vpi(struct lpfc_vport *);
void lpfc_config_hbq(struct lpfc_hba *, uint32_t, struct lpfc_hbq_init *,
uint32_t , LPFC_MBOXQ_t *);
@@ -206,7 +216,11 @@
void lpfc_sli4_rb_free(struct lpfc_hba *, struct hbq_dmabuf *);
void lpfc_sli4_build_dflt_fcf_record(struct lpfc_hba *, struct fcf_record *,
uint16_t);
+void lpfc_unregister_fcf(struct lpfc_hba *);
+void lpfc_unregister_fcf_rescan(struct lpfc_hba *);
void lpfc_unregister_unused_fcf(struct lpfc_hba *);
+int lpfc_sli4_redisc_fcf_table(struct lpfc_hba *);
+void lpfc_fcf_redisc_wait_start_timer(struct lpfc_hba *);
int lpfc_mem_alloc(struct lpfc_hba *, int align);
void lpfc_mem_free(struct lpfc_hba *);
@@ -365,6 +379,8 @@
void lpfc_create_static_vport(struct lpfc_hba *);
void lpfc_stop_hba_timers(struct lpfc_hba *);
void lpfc_stop_port(struct lpfc_hba *);
+void __lpfc_sli4_stop_fcf_redisc_wait_timer(struct lpfc_hba *);
+void lpfc_sli4_stop_fcf_redisc_wait_timer(struct lpfc_hba *);
void lpfc_parse_fcoe_conf(struct lpfc_hba *, uint8_t *, uint32_t);
int lpfc_parse_vpd(struct lpfc_hba *, uint8_t *, int);
void lpfc_start_fdiscs(struct lpfc_hba *phba);
@@ -378,5 +394,5 @@
/* functions to support SGIOv4/bsg interface */
int lpfc_bsg_request(struct fc_bsg_job *);
int lpfc_bsg_timeout(struct fc_bsg_job *);
-void lpfc_bsg_ct_unsol_event(struct lpfc_hba *, struct lpfc_sli_ring *,
+int lpfc_bsg_ct_unsol_event(struct lpfc_hba *, struct lpfc_sli_ring *,
struct lpfc_iocbq *);
diff --git a/drivers/scsi/lpfc/lpfc_ct.c b/drivers/scsi/lpfc/lpfc_ct.c
index 0ebcd9b..c7e9219 100644
--- a/drivers/scsi/lpfc/lpfc_ct.c
+++ b/drivers/scsi/lpfc/lpfc_ct.c
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2009 Emulex. All rights reserved. *
+ * Copyright (C) 2004-2010 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* *
@@ -97,7 +97,8 @@
struct list_head head;
struct lpfc_dmabuf *bdeBuf;
- lpfc_bsg_ct_unsol_event(phba, pring, piocbq);
+ if (lpfc_bsg_ct_unsol_event(phba, pring, piocbq) == 0)
+ return;
if (unlikely(icmd->ulpStatus == IOSTAT_NEED_BUFFER)) {
lpfc_sli_hbqbuf_add_hbqs(phba, LPFC_ELS_HBQ);
@@ -181,7 +182,8 @@
uint32_t size;
/* Forward abort event to any process registered to receive ct event */
- lpfc_bsg_ct_unsol_event(phba, pring, piocbq);
+ if (lpfc_bsg_ct_unsol_event(phba, pring, piocbq) == 0)
+ return;
/* If there is no BDE associated with IOCB, there is nothing to do */
if (icmd->ulpBdeCount == 0)
@@ -1843,12 +1845,7 @@
c = (rev & 0x0000ff00) >> 8;
b4 = (rev & 0x000000ff);
- if (flag)
- sprintf(fwrevision, "%d.%d%d%c%d ", b1,
- b2, b3, c, b4);
- else
- sprintf(fwrevision, "%d.%d%d%c%d ", b1,
- b2, b3, c, b4);
+ sprintf(fwrevision, "%d.%d%d%c%d", b1, b2, b3, c, b4);
}
return;
}
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 2cc3968..08b6634 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -50,9 +50,6 @@
struct lpfc_nodelist *ndlp, uint8_t retry);
static int lpfc_issue_fabric_iocb(struct lpfc_hba *phba,
struct lpfc_iocbq *iocb);
-static void lpfc_register_new_vport(struct lpfc_hba *phba,
- struct lpfc_vport *vport,
- struct lpfc_nodelist *ndlp);
static int lpfc_max_els_tries = 3;
@@ -592,6 +589,15 @@
vport->fc_flag |= FC_VPORT_NEEDS_REG_VPI;
spin_unlock_irq(shost->host_lock);
}
+ /*
+ * If VPI is unreged, driver need to do INIT_VPI
+ * before re-registering
+ */
+ if (phba->sli_rev == LPFC_SLI_REV4) {
+ spin_lock_irq(shost->host_lock);
+ vport->fc_flag |= FC_VPORT_NEEDS_INIT_VPI;
+ spin_unlock_irq(shost->host_lock);
+ }
}
if (phba->sli_rev < LPFC_SLI_REV4) {
@@ -604,10 +610,13 @@
} else {
ndlp->nlp_type |= NLP_FABRIC;
lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE);
- if (vport->vpi_state & LPFC_VPI_REGISTERED) {
+ if ((!(vport->fc_flag & FC_VPORT_NEEDS_REG_VPI)) &&
+ (vport->vpi_state & LPFC_VPI_REGISTERED)) {
lpfc_start_fdiscs(phba);
lpfc_do_scr_ns_plogi(phba, vport);
- } else
+ } else if (vport->fc_flag & FC_VFI_REGISTERED)
+ lpfc_issue_init_vpi(vport);
+ else
lpfc_issue_reg_vfi(vport);
}
return 0;
@@ -804,6 +813,9 @@
irsp->ulpTimeout);
goto flogifail;
}
+ spin_lock_irq(shost->host_lock);
+ vport->fc_flag &= ~FC_VPORT_CVL_RCVD;
+ spin_unlock_irq(shost->host_lock);
/*
* The FLogI succeeded. Sync the data for the CPU before
@@ -2720,7 +2732,7 @@
if (did == FDMI_DID)
retry = 1;
- if ((cmd == ELS_CMD_FLOGI) &&
+ if (((cmd == ELS_CMD_FLOGI) || (cmd == ELS_CMD_FDISC)) &&
(phba->fc_topology != TOPOLOGY_LOOP) &&
!lpfc_error_lost_link(irsp)) {
/* FLOGI retry policy */
@@ -4385,7 +4397,7 @@
did = Fabric_DID;
- if ((lpfc_check_sparm(vport, ndlp, sp, CLASS3))) {
+ if ((lpfc_check_sparm(vport, ndlp, sp, CLASS3, 1))) {
/* For a FLOGI we accept, then if our portname is greater
* then the remote portname we initiate Nport login.
*/
@@ -5915,6 +5927,7 @@
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
struct lpfc_nodelist *ndlp = (struct lpfc_nodelist *) pmb->context2;
MAILBOX_t *mb = &pmb->u.mb;
+ int rc;
spin_lock_irq(shost->host_lock);
vport->fc_flag &= ~FC_VPORT_NEEDS_REG_VPI;
@@ -5936,6 +5949,26 @@
spin_unlock_irq(shost->host_lock);
lpfc_can_disctmo(vport);
break;
+ /* If reg_vpi fail with invalid VPI status, re-init VPI */
+ case 0x20:
+ spin_lock_irq(shost->host_lock);
+ vport->fc_flag |= FC_VPORT_NEEDS_REG_VPI;
+ spin_unlock_irq(shost->host_lock);
+ lpfc_init_vpi(phba, pmb, vport->vpi);
+ pmb->vport = vport;
+ pmb->mbox_cmpl = lpfc_init_vpi_cmpl;
+ rc = lpfc_sli_issue_mbox(phba, pmb,
+ MBX_NOWAIT);
+ if (rc == MBX_NOT_FINISHED) {
+ lpfc_printf_vlog(vport,
+ KERN_ERR, LOG_MBOX,
+ "2732 Failed to issue INIT_VPI"
+ " mailbox command\n");
+ } else {
+ lpfc_nlp_put(ndlp);
+ return;
+ }
+
default:
/* Try to recover from this error */
lpfc_mbx_unreg_vpi(vport);
@@ -5949,13 +5982,17 @@
break;
}
} else {
+ spin_lock_irq(shost->host_lock);
vport->vpi_state |= LPFC_VPI_REGISTERED;
- if (vport == phba->pport)
+ spin_unlock_irq(shost->host_lock);
+ if (vport == phba->pport) {
if (phba->sli_rev < LPFC_SLI_REV4)
lpfc_issue_fabric_reglogin(vport);
- else
- lpfc_issue_reg_vfi(vport);
- else
+ else {
+ lpfc_start_fdiscs(phba);
+ lpfc_do_scr_ns_plogi(phba, vport);
+ }
+ } else
lpfc_do_scr_ns_plogi(phba, vport);
}
@@ -5977,7 +6014,7 @@
* This routine registers the @vport as a new virtual port with a HBA.
* It is done through a registering vpi mailbox command.
**/
-static void
+void
lpfc_register_new_vport(struct lpfc_hba *phba, struct lpfc_vport *vport,
struct lpfc_nodelist *ndlp)
{
@@ -6018,6 +6055,78 @@
}
/**
+ * lpfc_retry_pport_discovery - Start timer to retry FLOGI.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine abort all pending discovery commands and
+ * start a timer to retry FLOGI for the physical port
+ * discovery.
+ **/
+void
+lpfc_retry_pport_discovery(struct lpfc_hba *phba)
+{
+ struct lpfc_vport **vports;
+ struct lpfc_nodelist *ndlp;
+ struct Scsi_Host *shost;
+ int i;
+ uint32_t link_state;
+
+ /* Treat this failure as linkdown for all vports */
+ link_state = phba->link_state;
+ lpfc_linkdown(phba);
+ phba->link_state = link_state;
+
+ vports = lpfc_create_vport_work_array(phba);
+
+ if (vports) {
+ for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
+ ndlp = lpfc_findnode_did(vports[i], Fabric_DID);
+ if (ndlp)
+ lpfc_cancel_retry_delay_tmo(vports[i], ndlp);
+ lpfc_els_flush_cmd(vports[i]);
+ }
+ lpfc_destroy_vport_work_array(phba, vports);
+ }
+
+ /* If fabric require FLOGI, then re-instantiate physical login */
+ ndlp = lpfc_findnode_did(phba->pport, Fabric_DID);
+ if (!ndlp)
+ return;
+
+
+ shost = lpfc_shost_from_vport(phba->pport);
+ mod_timer(&ndlp->nlp_delayfunc, jiffies + HZ);
+ spin_lock_irq(shost->host_lock);
+ ndlp->nlp_flag |= NLP_DELAY_TMO;
+ spin_unlock_irq(shost->host_lock);
+ ndlp->nlp_last_elscmd = ELS_CMD_FLOGI;
+ phba->pport->port_state = LPFC_FLOGI;
+ return;
+}
+
+/**
+ * lpfc_fabric_login_reqd - Check if FLOGI required.
+ * @phba: pointer to lpfc hba data structure.
+ * @cmdiocb: pointer to FDISC command iocb.
+ * @rspiocb: pointer to FDISC response iocb.
+ *
+ * This routine checks if a FLOGI is reguired for FDISC
+ * to succeed.
+ **/
+static int
+lpfc_fabric_login_reqd(struct lpfc_hba *phba,
+ struct lpfc_iocbq *cmdiocb,
+ struct lpfc_iocbq *rspiocb)
+{
+
+ if ((rspiocb->iocb.ulpStatus != IOSTAT_FABRIC_RJT) ||
+ (rspiocb->iocb.un.ulpWord[4] != RJT_LOGIN_REQUIRED))
+ return 0;
+ else
+ return 1;
+}
+
+/**
* lpfc_cmpl_els_fdisc - Completion function for fdisc iocb command
* @phba: pointer to lpfc hba data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
@@ -6066,6 +6175,12 @@
irsp->ulpStatus, irsp->un.ulpWord[4], vport->fc_prevDID);
if (irsp->ulpStatus) {
+
+ if (lpfc_fabric_login_reqd(phba, cmdiocb, rspiocb)) {
+ lpfc_retry_pport_discovery(phba);
+ goto out;
+ }
+
/* Check for retry */
if (lpfc_els_retry(phba, cmdiocb, rspiocb))
goto out;
@@ -6076,6 +6191,7 @@
goto fdisc_failed;
}
spin_lock_irq(shost->host_lock);
+ vport->fc_flag &= ~FC_VPORT_CVL_RCVD;
vport->fc_flag |= FC_FABRIC;
if (vport->phba->fc_topology == TOPOLOGY_LOOP)
vport->fc_flag |= FC_PUBLIC_LOOP;
@@ -6103,10 +6219,13 @@
lpfc_mbx_unreg_vpi(vport);
spin_lock_irq(shost->host_lock);
vport->fc_flag |= FC_VPORT_NEEDS_REG_VPI;
+ vport->fc_flag |= FC_VPORT_NEEDS_INIT_VPI;
spin_unlock_irq(shost->host_lock);
}
- if (vport->fc_flag & FC_VPORT_NEEDS_REG_VPI)
+ if (vport->fc_flag & FC_VPORT_NEEDS_INIT_VPI)
+ lpfc_issue_init_vpi(vport);
+ else if (vport->fc_flag & FC_VPORT_NEEDS_REG_VPI)
lpfc_register_new_vport(phba, vport, ndlp);
else
lpfc_do_scr_ns_plogi(phba, vport);
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index 2445e39..2359d0b 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -525,6 +525,8 @@
spin_unlock_irq(&phba->hbalock);
lpfc_sli_hbqbuf_add_hbqs(phba, LPFC_ELS_HBQ);
}
+ if (phba->fcf.fcf_flag & FCF_REDISC_EVT)
+ lpfc_sli4_fcf_redisc_event_proc(phba);
}
vports = lpfc_create_vport_work_array(phba);
@@ -706,6 +708,8 @@
void
lpfc_port_link_failure(struct lpfc_vport *vport)
{
+ lpfc_vport_set_state(vport, FC_VPORT_LINKDOWN);
+
/* Cleanup any outstanding received buffers */
lpfc_cleanup_rcv_buffers(vport);
@@ -752,12 +756,14 @@
lpfc_scsi_dev_block(phba);
spin_lock_irq(&phba->hbalock);
- phba->fcf.fcf_flag &= ~(FCF_AVAILABLE | FCF_DISCOVERED);
+ phba->fcf.fcf_flag &= ~(FCF_AVAILABLE | FCF_SCAN_DONE);
+ spin_unlock_irq(&phba->hbalock);
if (phba->link_state > LPFC_LINK_DOWN) {
phba->link_state = LPFC_LINK_DOWN;
+ spin_lock_irq(shost->host_lock);
phba->pport->fc_flag &= ~FC_LBIT;
+ spin_unlock_irq(shost->host_lock);
}
- spin_unlock_irq(&phba->hbalock);
vports = lpfc_create_vport_work_array(phba);
if (vports != NULL)
for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
@@ -1023,7 +1029,7 @@
return;
}
spin_lock_irqsave(&phba->hbalock, flags);
- phba->fcf.fcf_flag |= (FCF_DISCOVERED | FCF_IN_USE);
+ phba->fcf.fcf_flag |= (FCF_SCAN_DONE | FCF_IN_USE);
phba->hba_flag &= ~FCF_DISC_INPROGRESS;
spin_unlock_irqrestore(&phba->hbalock, flags);
if (vport->port_state != LPFC_FLOGI)
@@ -1045,25 +1051,23 @@
static uint32_t
lpfc_fab_name_match(uint8_t *fab_name, struct fcf_record *new_fcf_record)
{
- if ((fab_name[0] ==
- bf_get(lpfc_fcf_record_fab_name_0, new_fcf_record)) &&
- (fab_name[1] ==
- bf_get(lpfc_fcf_record_fab_name_1, new_fcf_record)) &&
- (fab_name[2] ==
- bf_get(lpfc_fcf_record_fab_name_2, new_fcf_record)) &&
- (fab_name[3] ==
- bf_get(lpfc_fcf_record_fab_name_3, new_fcf_record)) &&
- (fab_name[4] ==
- bf_get(lpfc_fcf_record_fab_name_4, new_fcf_record)) &&
- (fab_name[5] ==
- bf_get(lpfc_fcf_record_fab_name_5, new_fcf_record)) &&
- (fab_name[6] ==
- bf_get(lpfc_fcf_record_fab_name_6, new_fcf_record)) &&
- (fab_name[7] ==
- bf_get(lpfc_fcf_record_fab_name_7, new_fcf_record)))
- return 1;
- else
+ if (fab_name[0] != bf_get(lpfc_fcf_record_fab_name_0, new_fcf_record))
return 0;
+ if (fab_name[1] != bf_get(lpfc_fcf_record_fab_name_1, new_fcf_record))
+ return 0;
+ if (fab_name[2] != bf_get(lpfc_fcf_record_fab_name_2, new_fcf_record))
+ return 0;
+ if (fab_name[3] != bf_get(lpfc_fcf_record_fab_name_3, new_fcf_record))
+ return 0;
+ if (fab_name[4] != bf_get(lpfc_fcf_record_fab_name_4, new_fcf_record))
+ return 0;
+ if (fab_name[5] != bf_get(lpfc_fcf_record_fab_name_5, new_fcf_record))
+ return 0;
+ if (fab_name[6] != bf_get(lpfc_fcf_record_fab_name_6, new_fcf_record))
+ return 0;
+ if (fab_name[7] != bf_get(lpfc_fcf_record_fab_name_7, new_fcf_record))
+ return 0;
+ return 1;
}
/**
@@ -1078,30 +1082,28 @@
static uint32_t
lpfc_sw_name_match(uint8_t *sw_name, struct fcf_record *new_fcf_record)
{
- if ((sw_name[0] ==
- bf_get(lpfc_fcf_record_switch_name_0, new_fcf_record)) &&
- (sw_name[1] ==
- bf_get(lpfc_fcf_record_switch_name_1, new_fcf_record)) &&
- (sw_name[2] ==
- bf_get(lpfc_fcf_record_switch_name_2, new_fcf_record)) &&
- (sw_name[3] ==
- bf_get(lpfc_fcf_record_switch_name_3, new_fcf_record)) &&
- (sw_name[4] ==
- bf_get(lpfc_fcf_record_switch_name_4, new_fcf_record)) &&
- (sw_name[5] ==
- bf_get(lpfc_fcf_record_switch_name_5, new_fcf_record)) &&
- (sw_name[6] ==
- bf_get(lpfc_fcf_record_switch_name_6, new_fcf_record)) &&
- (sw_name[7] ==
- bf_get(lpfc_fcf_record_switch_name_7, new_fcf_record)))
- return 1;
- else
+ if (sw_name[0] != bf_get(lpfc_fcf_record_switch_name_0, new_fcf_record))
return 0;
+ if (sw_name[1] != bf_get(lpfc_fcf_record_switch_name_1, new_fcf_record))
+ return 0;
+ if (sw_name[2] != bf_get(lpfc_fcf_record_switch_name_2, new_fcf_record))
+ return 0;
+ if (sw_name[3] != bf_get(lpfc_fcf_record_switch_name_3, new_fcf_record))
+ return 0;
+ if (sw_name[4] != bf_get(lpfc_fcf_record_switch_name_4, new_fcf_record))
+ return 0;
+ if (sw_name[5] != bf_get(lpfc_fcf_record_switch_name_5, new_fcf_record))
+ return 0;
+ if (sw_name[6] != bf_get(lpfc_fcf_record_switch_name_6, new_fcf_record))
+ return 0;
+ if (sw_name[7] != bf_get(lpfc_fcf_record_switch_name_7, new_fcf_record))
+ return 0;
+ return 1;
}
/**
* lpfc_mac_addr_match - Check if the fcf mac address match.
- * @phba: pointer to lpfc hba data structure.
+ * @mac_addr: pointer to mac address.
* @new_fcf_record: pointer to fcf record.
*
* This routine compare the fcf record's mac address with HBA's
@@ -1109,85 +1111,115 @@
* returns 1 else return 0.
**/
static uint32_t
-lpfc_mac_addr_match(struct lpfc_hba *phba, struct fcf_record *new_fcf_record)
+lpfc_mac_addr_match(uint8_t *mac_addr, struct fcf_record *new_fcf_record)
{
- if ((phba->fcf.mac_addr[0] ==
- bf_get(lpfc_fcf_record_mac_0, new_fcf_record)) &&
- (phba->fcf.mac_addr[1] ==
- bf_get(lpfc_fcf_record_mac_1, new_fcf_record)) &&
- (phba->fcf.mac_addr[2] ==
- bf_get(lpfc_fcf_record_mac_2, new_fcf_record)) &&
- (phba->fcf.mac_addr[3] ==
- bf_get(lpfc_fcf_record_mac_3, new_fcf_record)) &&
- (phba->fcf.mac_addr[4] ==
- bf_get(lpfc_fcf_record_mac_4, new_fcf_record)) &&
- (phba->fcf.mac_addr[5] ==
- bf_get(lpfc_fcf_record_mac_5, new_fcf_record)))
- return 1;
- else
+ if (mac_addr[0] != bf_get(lpfc_fcf_record_mac_0, new_fcf_record))
return 0;
+ if (mac_addr[1] != bf_get(lpfc_fcf_record_mac_1, new_fcf_record))
+ return 0;
+ if (mac_addr[2] != bf_get(lpfc_fcf_record_mac_2, new_fcf_record))
+ return 0;
+ if (mac_addr[3] != bf_get(lpfc_fcf_record_mac_3, new_fcf_record))
+ return 0;
+ if (mac_addr[4] != bf_get(lpfc_fcf_record_mac_4, new_fcf_record))
+ return 0;
+ if (mac_addr[5] != bf_get(lpfc_fcf_record_mac_5, new_fcf_record))
+ return 0;
+ return 1;
+}
+
+static bool
+lpfc_vlan_id_match(uint16_t curr_vlan_id, uint16_t new_vlan_id)
+{
+ return (curr_vlan_id == new_vlan_id);
}
/**
* lpfc_copy_fcf_record - Copy fcf information to lpfc_hba.
- * @phba: pointer to lpfc hba data structure.
+ * @fcf: pointer to driver fcf record.
* @new_fcf_record: pointer to fcf record.
*
* This routine copies the FCF information from the FCF
* record to lpfc_hba data structure.
**/
static void
-lpfc_copy_fcf_record(struct lpfc_hba *phba, struct fcf_record *new_fcf_record)
+lpfc_copy_fcf_record(struct lpfc_fcf_rec *fcf_rec,
+ struct fcf_record *new_fcf_record)
{
- phba->fcf.fabric_name[0] =
+ /* Fabric name */
+ fcf_rec->fabric_name[0] =
bf_get(lpfc_fcf_record_fab_name_0, new_fcf_record);
- phba->fcf.fabric_name[1] =
+ fcf_rec->fabric_name[1] =
bf_get(lpfc_fcf_record_fab_name_1, new_fcf_record);
- phba->fcf.fabric_name[2] =
+ fcf_rec->fabric_name[2] =
bf_get(lpfc_fcf_record_fab_name_2, new_fcf_record);
- phba->fcf.fabric_name[3] =
+ fcf_rec->fabric_name[3] =
bf_get(lpfc_fcf_record_fab_name_3, new_fcf_record);
- phba->fcf.fabric_name[4] =
+ fcf_rec->fabric_name[4] =
bf_get(lpfc_fcf_record_fab_name_4, new_fcf_record);
- phba->fcf.fabric_name[5] =
+ fcf_rec->fabric_name[5] =
bf_get(lpfc_fcf_record_fab_name_5, new_fcf_record);
- phba->fcf.fabric_name[6] =
+ fcf_rec->fabric_name[6] =
bf_get(lpfc_fcf_record_fab_name_6, new_fcf_record);
- phba->fcf.fabric_name[7] =
+ fcf_rec->fabric_name[7] =
bf_get(lpfc_fcf_record_fab_name_7, new_fcf_record);
- phba->fcf.mac_addr[0] =
- bf_get(lpfc_fcf_record_mac_0, new_fcf_record);
- phba->fcf.mac_addr[1] =
- bf_get(lpfc_fcf_record_mac_1, new_fcf_record);
- phba->fcf.mac_addr[2] =
- bf_get(lpfc_fcf_record_mac_2, new_fcf_record);
- phba->fcf.mac_addr[3] =
- bf_get(lpfc_fcf_record_mac_3, new_fcf_record);
- phba->fcf.mac_addr[4] =
- bf_get(lpfc_fcf_record_mac_4, new_fcf_record);
- phba->fcf.mac_addr[5] =
- bf_get(lpfc_fcf_record_mac_5, new_fcf_record);
- phba->fcf.fcf_indx = bf_get(lpfc_fcf_record_fcf_index, new_fcf_record);
- phba->fcf.priority = new_fcf_record->fip_priority;
- phba->fcf.switch_name[0] =
+ /* Mac address */
+ fcf_rec->mac_addr[0] = bf_get(lpfc_fcf_record_mac_0, new_fcf_record);
+ fcf_rec->mac_addr[1] = bf_get(lpfc_fcf_record_mac_1, new_fcf_record);
+ fcf_rec->mac_addr[2] = bf_get(lpfc_fcf_record_mac_2, new_fcf_record);
+ fcf_rec->mac_addr[3] = bf_get(lpfc_fcf_record_mac_3, new_fcf_record);
+ fcf_rec->mac_addr[4] = bf_get(lpfc_fcf_record_mac_4, new_fcf_record);
+ fcf_rec->mac_addr[5] = bf_get(lpfc_fcf_record_mac_5, new_fcf_record);
+ /* FCF record index */
+ fcf_rec->fcf_indx = bf_get(lpfc_fcf_record_fcf_index, new_fcf_record);
+ /* FCF record priority */
+ fcf_rec->priority = new_fcf_record->fip_priority;
+ /* Switch name */
+ fcf_rec->switch_name[0] =
bf_get(lpfc_fcf_record_switch_name_0, new_fcf_record);
- phba->fcf.switch_name[1] =
+ fcf_rec->switch_name[1] =
bf_get(lpfc_fcf_record_switch_name_1, new_fcf_record);
- phba->fcf.switch_name[2] =
+ fcf_rec->switch_name[2] =
bf_get(lpfc_fcf_record_switch_name_2, new_fcf_record);
- phba->fcf.switch_name[3] =
+ fcf_rec->switch_name[3] =
bf_get(lpfc_fcf_record_switch_name_3, new_fcf_record);
- phba->fcf.switch_name[4] =
+ fcf_rec->switch_name[4] =
bf_get(lpfc_fcf_record_switch_name_4, new_fcf_record);
- phba->fcf.switch_name[5] =
+ fcf_rec->switch_name[5] =
bf_get(lpfc_fcf_record_switch_name_5, new_fcf_record);
- phba->fcf.switch_name[6] =
+ fcf_rec->switch_name[6] =
bf_get(lpfc_fcf_record_switch_name_6, new_fcf_record);
- phba->fcf.switch_name[7] =
+ fcf_rec->switch_name[7] =
bf_get(lpfc_fcf_record_switch_name_7, new_fcf_record);
}
/**
+ * lpfc_update_fcf_record - Update driver fcf record
+ * @phba: pointer to lpfc hba data structure.
+ * @fcf_rec: pointer to driver fcf record.
+ * @new_fcf_record: pointer to hba fcf record.
+ * @addr_mode: address mode to be set to the driver fcf record.
+ * @vlan_id: vlan tag to be set to the driver fcf record.
+ * @flag: flag bits to be set to the driver fcf record.
+ *
+ * This routine updates the driver FCF record from the new HBA FCF record
+ * together with the address mode, vlan_id, and other informations. This
+ * routine is called with the host lock held.
+ **/
+static void
+__lpfc_update_fcf_record(struct lpfc_hba *phba, struct lpfc_fcf_rec *fcf_rec,
+ struct fcf_record *new_fcf_record, uint32_t addr_mode,
+ uint16_t vlan_id, uint32_t flag)
+{
+ /* Copy the fields from the HBA's FCF record */
+ lpfc_copy_fcf_record(fcf_rec, new_fcf_record);
+ /* Update other fields of driver FCF record */
+ fcf_rec->addr_mode = addr_mode;
+ fcf_rec->vlan_id = vlan_id;
+ fcf_rec->flag |= (flag | RECORD_VALID);
+}
+
+/**
* lpfc_register_fcf - Register the FCF with hba.
* @phba: pointer to lpfc hba data structure.
*
@@ -1212,7 +1244,7 @@
/* The FCF is already registered, start discovery */
if (phba->fcf.fcf_flag & FCF_REGISTERED) {
- phba->fcf.fcf_flag |= (FCF_DISCOVERED | FCF_IN_USE);
+ phba->fcf.fcf_flag |= (FCF_SCAN_DONE | FCF_IN_USE);
phba->hba_flag &= ~FCF_DISC_INPROGRESS;
spin_unlock_irqrestore(&phba->hbalock, flags);
if (phba->pport->port_state != LPFC_FLOGI)
@@ -1250,6 +1282,7 @@
* @new_fcf_record: pointer to fcf record.
* @boot_flag: Indicates if this record used by boot bios.
* @addr_mode: The address mode to be used by this FCF
+ * @vlan_id: The vlan id to be used as vlan tagging by this FCF.
*
* This routine compare the fcf record with connect list obtained from the
* config region to decide if this FCF can be used for SAN discovery. It returns
@@ -1323,7 +1356,8 @@
return 1;
}
- list_for_each_entry(conn_entry, &phba->fcf_conn_rec_list, list) {
+ list_for_each_entry(conn_entry,
+ &phba->fcf_conn_rec_list, list) {
if (!(conn_entry->conn_rec.flags & FCFCNCT_VALID))
continue;
@@ -1470,6 +1504,7 @@
*/
spin_lock_irq(&phba->hbalock);
phba->hba_flag &= ~FCF_DISC_INPROGRESS;
+ phba->fcf.fcf_flag &= ~FCF_REDISC_FOV;
spin_unlock_irq(&phba->hbalock);
}
@@ -1524,11 +1559,12 @@
uint32_t shdr_status, shdr_add_status;
union lpfc_sli4_cfg_shdr *shdr;
struct fcf_record *new_fcf_record;
- int rc;
uint32_t boot_flag, addr_mode;
uint32_t next_fcf_index;
- unsigned long flags;
+ struct lpfc_fcf_rec *fcf_rec = NULL;
+ unsigned long iflags;
uint16_t vlan_id;
+ int rc;
/* If there is pending FCoE event restart FCF table scan */
if (lpfc_check_pending_fcoe_event(phba, 0)) {
@@ -1583,9 +1619,8 @@
sizeof(struct fcf_record));
bytep = virt_addr + sizeof(union lpfc_sli4_cfg_shdr);
- rc = lpfc_match_fcf_conn_list(phba, new_fcf_record,
- &boot_flag, &addr_mode,
- &vlan_id);
+ rc = lpfc_match_fcf_conn_list(phba, new_fcf_record, &boot_flag,
+ &addr_mode, &vlan_id);
/*
* If the fcf record does not match with connect list entries
* read the next entry.
@@ -1594,90 +1629,159 @@
goto read_next_fcf;
/*
* If this is not the first FCF discovery of the HBA, use last
- * FCF record for the discovery.
+ * FCF record for the discovery. The condition that a rescan
+ * matches the in-use FCF record: fabric name, switch name, mac
+ * address, and vlan_id.
*/
- spin_lock_irqsave(&phba->hbalock, flags);
+ spin_lock_irqsave(&phba->hbalock, iflags);
if (phba->fcf.fcf_flag & FCF_IN_USE) {
- if (lpfc_fab_name_match(phba->fcf.fabric_name,
+ if (lpfc_fab_name_match(phba->fcf.current_rec.fabric_name,
new_fcf_record) &&
- lpfc_sw_name_match(phba->fcf.switch_name,
+ lpfc_sw_name_match(phba->fcf.current_rec.switch_name,
new_fcf_record) &&
- lpfc_mac_addr_match(phba, new_fcf_record)) {
+ lpfc_mac_addr_match(phba->fcf.current_rec.mac_addr,
+ new_fcf_record) &&
+ lpfc_vlan_id_match(phba->fcf.current_rec.vlan_id,
+ vlan_id)) {
phba->fcf.fcf_flag |= FCF_AVAILABLE;
- spin_unlock_irqrestore(&phba->hbalock, flags);
+ if (phba->fcf.fcf_flag & FCF_REDISC_PEND)
+ /* Stop FCF redisc wait timer if pending */
+ __lpfc_sli4_stop_fcf_redisc_wait_timer(phba);
+ else if (phba->fcf.fcf_flag & FCF_REDISC_FOV)
+ /* If in fast failover, mark it's completed */
+ phba->fcf.fcf_flag &= ~FCF_REDISC_FOV;
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
goto out;
}
- spin_unlock_irqrestore(&phba->hbalock, flags);
- goto read_next_fcf;
+ /*
+ * Read next FCF record from HBA searching for the matching
+ * with in-use record only if not during the fast failover
+ * period. In case of fast failover period, it shall try to
+ * determine whether the FCF record just read should be the
+ * next candidate.
+ */
+ if (!(phba->fcf.fcf_flag & FCF_REDISC_FOV)) {
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+ goto read_next_fcf;
+ }
}
+ /*
+ * Update on failover FCF record only if it's in FCF fast-failover
+ * period; otherwise, update on current FCF record.
+ */
+ if (phba->fcf.fcf_flag & FCF_REDISC_FOV) {
+ /* Fast FCF failover only to the same fabric name */
+ if (lpfc_fab_name_match(phba->fcf.current_rec.fabric_name,
+ new_fcf_record))
+ fcf_rec = &phba->fcf.failover_rec;
+ else
+ goto read_next_fcf;
+ } else
+ fcf_rec = &phba->fcf.current_rec;
+
if (phba->fcf.fcf_flag & FCF_AVAILABLE) {
/*
- * If the current FCF record does not have boot flag
- * set and new fcf record has boot flag set, use the
- * new fcf record.
+ * If the driver FCF record does not have boot flag
+ * set and new hba fcf record has boot flag set, use
+ * the new hba fcf record.
*/
- if (boot_flag && !(phba->fcf.fcf_flag & FCF_BOOT_ENABLE)) {
- /* Use this FCF record */
- lpfc_copy_fcf_record(phba, new_fcf_record);
- phba->fcf.addr_mode = addr_mode;
- phba->fcf.fcf_flag |= FCF_BOOT_ENABLE;
- if (vlan_id != 0xFFFF) {
- phba->fcf.fcf_flag |= FCF_VALID_VLAN;
- phba->fcf.vlan_id = vlan_id;
- }
- spin_unlock_irqrestore(&phba->hbalock, flags);
+ if (boot_flag && !(fcf_rec->flag & BOOT_ENABLE)) {
+ /* Choose this FCF record */
+ __lpfc_update_fcf_record(phba, fcf_rec, new_fcf_record,
+ addr_mode, vlan_id, BOOT_ENABLE);
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
goto read_next_fcf;
}
/*
- * If the current FCF record has boot flag set and the
- * new FCF record does not have boot flag, read the next
- * FCF record.
+ * If the driver FCF record has boot flag set and the
+ * new hba FCF record does not have boot flag, read
+ * the next FCF record.
*/
- if (!boot_flag && (phba->fcf.fcf_flag & FCF_BOOT_ENABLE)) {
- spin_unlock_irqrestore(&phba->hbalock, flags);
+ if (!boot_flag && (fcf_rec->flag & BOOT_ENABLE)) {
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
goto read_next_fcf;
}
/*
- * If there is a record with lower priority value for
- * the current FCF, use that record.
+ * If the new hba FCF record has lower priority value
+ * than the driver FCF record, use the new record.
*/
- if (lpfc_fab_name_match(phba->fcf.fabric_name,
- new_fcf_record) &&
- (new_fcf_record->fip_priority < phba->fcf.priority)) {
- /* Use this FCF record */
- lpfc_copy_fcf_record(phba, new_fcf_record);
- phba->fcf.addr_mode = addr_mode;
- if (vlan_id != 0xFFFF) {
- phba->fcf.fcf_flag |= FCF_VALID_VLAN;
- phba->fcf.vlan_id = vlan_id;
- }
- spin_unlock_irqrestore(&phba->hbalock, flags);
- goto read_next_fcf;
+ if (lpfc_fab_name_match(fcf_rec->fabric_name, new_fcf_record) &&
+ (new_fcf_record->fip_priority < fcf_rec->priority)) {
+ /* Choose this FCF record */
+ __lpfc_update_fcf_record(phba, fcf_rec, new_fcf_record,
+ addr_mode, vlan_id, 0);
}
- spin_unlock_irqrestore(&phba->hbalock, flags);
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
goto read_next_fcf;
}
/*
- * This is the first available FCF record, use this
- * record.
+ * This is the first suitable FCF record, choose this record for
+ * initial best-fit FCF.
*/
- lpfc_copy_fcf_record(phba, new_fcf_record);
- phba->fcf.addr_mode = addr_mode;
- if (boot_flag)
- phba->fcf.fcf_flag |= FCF_BOOT_ENABLE;
- phba->fcf.fcf_flag |= FCF_AVAILABLE;
- if (vlan_id != 0xFFFF) {
- phba->fcf.fcf_flag |= FCF_VALID_VLAN;
- phba->fcf.vlan_id = vlan_id;
+ if (fcf_rec) {
+ __lpfc_update_fcf_record(phba, fcf_rec, new_fcf_record,
+ addr_mode, vlan_id, (boot_flag ?
+ BOOT_ENABLE : 0));
+ phba->fcf.fcf_flag |= FCF_AVAILABLE;
}
- spin_unlock_irqrestore(&phba->hbalock, flags);
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
goto read_next_fcf;
read_next_fcf:
lpfc_sli4_mbox_cmd_free(phba, mboxq);
- if (next_fcf_index == LPFC_FCOE_FCF_NEXT_NONE || next_fcf_index == 0)
- lpfc_register_fcf(phba);
- else
+ if (next_fcf_index == LPFC_FCOE_FCF_NEXT_NONE || next_fcf_index == 0) {
+ if (phba->fcf.fcf_flag & FCF_REDISC_FOV) {
+ /*
+ * Case of FCF fast failover scan
+ */
+
+ /*
+ * It has not found any suitable FCF record, cancel
+ * FCF scan inprogress, and do nothing
+ */
+ if (!(phba->fcf.failover_rec.flag & RECORD_VALID)) {
+ spin_lock_irqsave(&phba->hbalock, iflags);
+ phba->hba_flag &= ~FCF_DISC_INPROGRESS;
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+ return;
+ }
+ /*
+ * It has found a suitable FCF record that is not
+ * the same as in-use FCF record, unregister the
+ * in-use FCF record, replace the in-use FCF record
+ * with the new FCF record, mark FCF fast failover
+ * completed, and then start register the new FCF
+ * record.
+ */
+
+ /* unregister the current in-use FCF record */
+ lpfc_unregister_fcf(phba);
+ /* replace in-use record with the new record */
+ memcpy(&phba->fcf.current_rec,
+ &phba->fcf.failover_rec,
+ sizeof(struct lpfc_fcf_rec));
+ /* mark the FCF fast failover completed */
+ spin_lock_irqsave(&phba->hbalock, iflags);
+ phba->fcf.fcf_flag &= ~FCF_REDISC_FOV;
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+ /* Register to the new FCF record */
+ lpfc_register_fcf(phba);
+ } else {
+ /*
+ * In case of transaction period to fast FCF failover,
+ * do nothing when search to the end of the FCF table.
+ */
+ if ((phba->fcf.fcf_flag & FCF_REDISC_EVT) ||
+ (phba->fcf.fcf_flag & FCF_REDISC_PEND))
+ return;
+ /*
+ * Otherwise, initial scan or post linkdown rescan,
+ * register with the best fit FCF record found so
+ * far through the scanning process.
+ */
+ lpfc_register_fcf(phba);
+ }
+ } else
lpfc_sli4_read_fcf_record(phba, next_fcf_index);
return;
@@ -1695,10 +1799,13 @@
*
* This function handles completion of init vpi mailbox command.
*/
-static void
+void
lpfc_init_vpi_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
{
struct lpfc_vport *vport = mboxq->vport;
+ struct lpfc_nodelist *ndlp;
+ struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
+
if (mboxq->u.mb.mbxStatus) {
lpfc_printf_vlog(vport, KERN_ERR,
LOG_MBOX,
@@ -1708,9 +1815,23 @@
lpfc_vport_set_state(vport, FC_VPORT_FAILED);
return;
}
- spin_lock_irq(&phba->hbalock);
+ spin_lock_irq(shost->host_lock);
vport->fc_flag &= ~FC_VPORT_NEEDS_INIT_VPI;
- spin_unlock_irq(&phba->hbalock);
+ spin_unlock_irq(shost->host_lock);
+
+ /* If this port is physical port or FDISC is done, do reg_vpi */
+ if ((phba->pport == vport) || (vport->port_state == LPFC_FDISC)) {
+ ndlp = lpfc_findnode_did(vport, Fabric_DID);
+ if (!ndlp)
+ lpfc_printf_vlog(vport, KERN_ERR,
+ LOG_DISCOVERY,
+ "2731 Cannot find fabric "
+ "controller node\n");
+ else
+ lpfc_register_new_vport(phba, vport, ndlp);
+ mempool_free(mboxq, phba->mbox_mem_pool);
+ return;
+ }
if (phba->link_flag & LS_NPIV_FAB_SUPPORTED)
lpfc_initial_fdisc(vport);
@@ -1719,10 +1840,42 @@
lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
"2606 No NPIV Fabric support\n");
}
+ mempool_free(mboxq, phba->mbox_mem_pool);
return;
}
/**
+ * lpfc_issue_init_vpi - Issue init_vpi mailbox command.
+ * @vport: pointer to lpfc_vport data structure.
+ *
+ * This function issue a init_vpi mailbox command to initialize
+ * VPI for the vport.
+ */
+void
+lpfc_issue_init_vpi(struct lpfc_vport *vport)
+{
+ LPFC_MBOXQ_t *mboxq;
+ int rc;
+
+ mboxq = mempool_alloc(vport->phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mboxq) {
+ lpfc_printf_vlog(vport, KERN_ERR,
+ LOG_MBOX, "2607 Failed to allocate "
+ "init_vpi mailbox\n");
+ return;
+ }
+ lpfc_init_vpi(vport->phba, mboxq, vport->vpi);
+ mboxq->vport = vport;
+ mboxq->mbox_cmpl = lpfc_init_vpi_cmpl;
+ rc = lpfc_sli_issue_mbox(vport->phba, mboxq, MBX_NOWAIT);
+ if (rc == MBX_NOT_FINISHED) {
+ lpfc_printf_vlog(vport, KERN_ERR,
+ LOG_MBOX, "2608 Failed to issue init_vpi mailbox\n");
+ mempool_free(mboxq, vport->phba->mbox_mem_pool);
+ }
+}
+
+/**
* lpfc_start_fdiscs - send fdiscs for each vports on this port.
* @phba: pointer to lpfc hba data structure.
*
@@ -1734,8 +1887,6 @@
{
struct lpfc_vport **vports;
int i;
- LPFC_MBOXQ_t *mboxq;
- int rc;
vports = lpfc_create_vport_work_array(phba);
if (vports != NULL) {
@@ -1754,26 +1905,7 @@
continue;
}
if (vports[i]->fc_flag & FC_VPORT_NEEDS_INIT_VPI) {
- mboxq = mempool_alloc(phba->mbox_mem_pool,
- GFP_KERNEL);
- if (!mboxq) {
- lpfc_printf_vlog(vports[i], KERN_ERR,
- LOG_MBOX, "2607 Failed to allocate "
- "init_vpi mailbox\n");
- continue;
- }
- lpfc_init_vpi(phba, mboxq, vports[i]->vpi);
- mboxq->vport = vports[i];
- mboxq->mbox_cmpl = lpfc_init_vpi_cmpl;
- rc = lpfc_sli_issue_mbox(phba, mboxq,
- MBX_NOWAIT);
- if (rc == MBX_NOT_FINISHED) {
- lpfc_printf_vlog(vports[i], KERN_ERR,
- LOG_MBOX, "2608 Failed to issue "
- "init_vpi mailbox\n");
- mempool_free(mboxq,
- phba->mbox_mem_pool);
- }
+ lpfc_issue_init_vpi(vports[i]);
continue;
}
if (phba->link_flag & LS_NPIV_FAB_SUPPORTED)
@@ -1796,6 +1928,7 @@
{
struct lpfc_dmabuf *dmabuf = mboxq->context1;
struct lpfc_vport *vport = mboxq->vport;
+ struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
if (mboxq->u.mb.mbxStatus) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX,
@@ -1813,7 +1946,11 @@
goto fail_free_mem;
}
/* The VPI is implicitly registered when the VFI is registered */
+ spin_lock_irq(shost->host_lock);
vport->vpi_state |= LPFC_VPI_REGISTERED;
+ vport->fc_flag |= FC_VFI_REGISTERED;
+ vport->fc_flag &= ~FC_VPORT_NEEDS_REG_VPI;
+ spin_unlock_irq(shost->host_lock);
if (vport->port_state == LPFC_FABRIC_CFG_LINK) {
lpfc_start_fdiscs(phba);
@@ -2050,8 +2187,7 @@
return;
}
spin_unlock_irq(&phba->hbalock);
- rc = lpfc_sli4_read_fcf_record(phba,
- LPFC_FCOE_FCF_GET_FIRST);
+ rc = lpfc_sli4_read_fcf_record(phba, LPFC_FCOE_FCF_GET_FIRST);
if (rc)
goto out;
}
@@ -2139,10 +2275,12 @@
}
phba->fc_eventTag = la->eventTag;
+ spin_lock_irq(&phba->hbalock);
if (la->mm)
phba->sli.sli_flag |= LPFC_MENLO_MAINT;
else
phba->sli.sli_flag &= ~LPFC_MENLO_MAINT;
+ spin_unlock_irq(&phba->hbalock);
phba->link_events++;
if (la->attType == AT_LINK_UP && (!la->mm)) {
@@ -2271,10 +2409,10 @@
mb->mbxStatus);
break;
}
- spin_lock_irq(&phba->hbalock);
+ spin_lock_irq(shost->host_lock);
vport->vpi_state &= ~LPFC_VPI_REGISTERED;
vport->fc_flag |= FC_VPORT_NEEDS_REG_VPI;
- spin_unlock_irq(&phba->hbalock);
+ spin_unlock_irq(shost->host_lock);
vport->unreg_vpi_cmpl = VPORT_OK;
mempool_free(pmb, phba->mbox_mem_pool);
/*
@@ -2332,7 +2470,10 @@
goto out;
}
+ spin_lock_irq(shost->host_lock);
vport->vpi_state |= LPFC_VPI_REGISTERED;
+ vport->fc_flag &= ~FC_VPORT_NEEDS_REG_VPI;
+ spin_unlock_irq(shost->host_lock);
vport->num_disc_nodes = 0;
/* go thru NPR list and issue ELS PLOGIs */
if (vport->fc_npr_cnt)
@@ -3218,6 +3359,34 @@
return 0;
}
+/**
+ * lpfc_unreg_hba_rpis - Unregister rpis registered to the hba.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to unregister all the currently registered RPIs
+ * to the HBA.
+ **/
+void
+lpfc_unreg_hba_rpis(struct lpfc_hba *phba)
+{
+ struct lpfc_vport **vports;
+ struct lpfc_nodelist *ndlp;
+ struct Scsi_Host *shost;
+ int i;
+
+ vports = lpfc_create_vport_work_array(phba);
+ for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
+ shost = lpfc_shost_from_vport(vports[i]);
+ spin_lock_irq(shost->host_lock);
+ list_for_each_entry(ndlp, &vports[i]->fc_nodes, nlp_listp) {
+ if (ndlp->nlp_flag & NLP_RPI_VALID)
+ lpfc_unreg_rpi(vports[i], ndlp);
+ }
+ spin_unlock_irq(shost->host_lock);
+ }
+ lpfc_destroy_vport_work_array(phba, vports);
+}
+
void
lpfc_unreg_all_rpis(struct lpfc_vport *vport)
{
@@ -4448,6 +4617,195 @@
}
/**
+ * lpfc_unregister_fcf_prep - Unregister fcf record preparation
+ * @phba: Pointer to hba context object.
+ *
+ * This function prepare the HBA for unregistering the currently registered
+ * FCF from the HBA. It performs unregistering, in order, RPIs, VPIs, and
+ * VFIs.
+ */
+int
+lpfc_unregister_fcf_prep(struct lpfc_hba *phba)
+{
+ LPFC_MBOXQ_t *mbox;
+ struct lpfc_vport **vports;
+ struct lpfc_nodelist *ndlp;
+ struct Scsi_Host *shost;
+ int i, rc;
+
+ /* Unregister RPIs */
+ if (lpfc_fcf_inuse(phba))
+ lpfc_unreg_hba_rpis(phba);
+
+ /* At this point, all discovery is aborted */
+ phba->pport->port_state = LPFC_VPORT_UNKNOWN;
+
+ /* Unregister VPIs */
+ vports = lpfc_create_vport_work_array(phba);
+ if (vports && (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED))
+ for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
+ /* Stop FLOGI/FDISC retries */
+ ndlp = lpfc_findnode_did(vports[i], Fabric_DID);
+ if (ndlp)
+ lpfc_cancel_retry_delay_tmo(vports[i], ndlp);
+ lpfc_mbx_unreg_vpi(vports[i]);
+ shost = lpfc_shost_from_vport(vports[i]);
+ spin_lock_irq(shost->host_lock);
+ vports[i]->fc_flag |= FC_VPORT_NEEDS_INIT_VPI;
+ vports[i]->vpi_state &= ~LPFC_VPI_REGISTERED;
+ spin_unlock_irq(shost->host_lock);
+ }
+ lpfc_destroy_vport_work_array(phba, vports);
+
+ /* Cleanup any outstanding ELS commands */
+ lpfc_els_flush_all_cmd(phba);
+
+ /* Unregister VFI */
+ mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mbox) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY|LOG_MBOX,
+ "2556 UNREG_VFI mbox allocation failed"
+ "HBA state x%x\n", phba->pport->port_state);
+ return -ENOMEM;
+ }
+
+ lpfc_unreg_vfi(mbox, phba->pport);
+ mbox->vport = phba->pport;
+ mbox->mbox_cmpl = lpfc_unregister_vfi_cmpl;
+
+ rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT);
+ if (rc == MBX_NOT_FINISHED) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY|LOG_MBOX,
+ "2557 UNREG_VFI issue mbox failed rc x%x "
+ "HBA state x%x\n",
+ rc, phba->pport->port_state);
+ mempool_free(mbox, phba->mbox_mem_pool);
+ return -EIO;
+ }
+
+ shost = lpfc_shost_from_vport(phba->pport);
+ spin_lock_irq(shost->host_lock);
+ phba->pport->fc_flag &= ~FC_VFI_REGISTERED;
+ spin_unlock_irq(shost->host_lock);
+
+ return 0;
+}
+
+/**
+ * lpfc_sli4_unregister_fcf - Unregister currently registered FCF record
+ * @phba: Pointer to hba context object.
+ *
+ * This function issues synchronous unregister FCF mailbox command to HBA to
+ * unregister the currently registered FCF record. The driver does not reset
+ * the driver FCF usage state flags.
+ *
+ * Return 0 if successfully issued, none-zero otherwise.
+ */
+int
+lpfc_sli4_unregister_fcf(struct lpfc_hba *phba)
+{
+ LPFC_MBOXQ_t *mbox;
+ int rc;
+
+ mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mbox) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY|LOG_MBOX,
+ "2551 UNREG_FCFI mbox allocation failed"
+ "HBA state x%x\n", phba->pport->port_state);
+ return -ENOMEM;
+ }
+ lpfc_unreg_fcfi(mbox, phba->fcf.fcfi);
+ mbox->vport = phba->pport;
+ mbox->mbox_cmpl = lpfc_unregister_fcfi_cmpl;
+ rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT);
+
+ if (rc == MBX_NOT_FINISHED) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "2552 Unregister FCFI command failed rc x%x "
+ "HBA state x%x\n",
+ rc, phba->pport->port_state);
+ return -EINVAL;
+ }
+ return 0;
+}
+
+/**
+ * lpfc_unregister_fcf_rescan - Unregister currently registered fcf and rescan
+ * @phba: Pointer to hba context object.
+ *
+ * This function unregisters the currently reigstered FCF. This function
+ * also tries to find another FCF for discovery by rescan the HBA FCF table.
+ */
+void
+lpfc_unregister_fcf_rescan(struct lpfc_hba *phba)
+{
+ int rc;
+
+ /* Preparation for unregistering fcf */
+ rc = lpfc_unregister_fcf_prep(phba);
+ if (rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY,
+ "2748 Failed to prepare for unregistering "
+ "HBA's FCF record: rc=%d\n", rc);
+ return;
+ }
+
+ /* Now, unregister FCF record and reset HBA FCF state */
+ rc = lpfc_sli4_unregister_fcf(phba);
+ if (rc)
+ return;
+ /* Reset HBA FCF states after successful unregister FCF */
+ phba->fcf.fcf_flag = 0;
+
+ /*
+ * If driver is not unloading, check if there is any other
+ * FCF record that can be used for discovery.
+ */
+ if ((phba->pport->load_flag & FC_UNLOADING) ||
+ (phba->link_state < LPFC_LINK_UP))
+ return;
+
+ rc = lpfc_sli4_read_fcf_record(phba, LPFC_FCOE_FCF_GET_FIRST);
+
+ if (rc)
+ lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY|LOG_MBOX,
+ "2553 lpfc_unregister_unused_fcf failed "
+ "to read FCF record HBA state x%x\n",
+ phba->pport->port_state);
+}
+
+/**
+ * lpfc_unregister_fcf - Unregister the currently registered fcf record
+ * @phba: Pointer to hba context object.
+ *
+ * This function just unregisters the currently reigstered FCF. It does not
+ * try to find another FCF for discovery.
+ */
+void
+lpfc_unregister_fcf(struct lpfc_hba *phba)
+{
+ int rc;
+
+ /* Preparation for unregistering fcf */
+ rc = lpfc_unregister_fcf_prep(phba);
+ if (rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY,
+ "2749 Failed to prepare for unregistering "
+ "HBA's FCF record: rc=%d\n", rc);
+ return;
+ }
+
+ /* Now, unregister FCF record and reset HBA FCF state */
+ rc = lpfc_sli4_unregister_fcf(phba);
+ if (rc)
+ return;
+ /* Set proper HBA FCF states after successful unregister FCF */
+ spin_lock_irq(&phba->hbalock);
+ phba->fcf.fcf_flag &= ~FCF_REGISTERED;
+ spin_unlock_irq(&phba->hbalock);
+}
+
+/**
* lpfc_unregister_unused_fcf - Unregister FCF if all devices are disconnected.
* @phba: Pointer to hba context object.
*
@@ -4458,21 +4816,14 @@
void
lpfc_unregister_unused_fcf(struct lpfc_hba *phba)
{
- LPFC_MBOXQ_t *mbox;
- int rc;
- struct lpfc_vport **vports;
- int i;
-
- spin_lock_irq(&phba->hbalock);
/*
- * If HBA is not running in FIP mode or
- * If HBA does not support FCoE or
- * If FCF is not registered.
- * do nothing.
+ * If HBA is not running in FIP mode or if HBA does not support
+ * FCoE or if FCF is not registered, do nothing.
*/
+ spin_lock_irq(&phba->hbalock);
if (!(phba->hba_flag & HBA_FCOE_SUPPORT) ||
- !(phba->fcf.fcf_flag & FCF_REGISTERED) ||
- (!(phba->hba_flag & HBA_FIP_SUPPORT))) {
+ !(phba->fcf.fcf_flag & FCF_REGISTERED) ||
+ !(phba->hba_flag & HBA_FIP_SUPPORT)) {
spin_unlock_irq(&phba->hbalock);
return;
}
@@ -4481,91 +4832,7 @@
if (lpfc_fcf_inuse(phba))
return;
- /* At this point, all discovery is aborted */
- phba->pport->port_state = LPFC_VPORT_UNKNOWN;
-
- /* Unregister VPIs */
- vports = lpfc_create_vport_work_array(phba);
- if (vports &&
- (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED))
- for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
- lpfc_mbx_unreg_vpi(vports[i]);
- spin_lock_irq(&phba->hbalock);
- vports[i]->fc_flag |= FC_VPORT_NEEDS_INIT_VPI;
- vports[i]->vpi_state &= ~LPFC_VPI_REGISTERED;
- spin_unlock_irq(&phba->hbalock);
- }
- lpfc_destroy_vport_work_array(phba, vports);
-
- /* Unregister VFI */
- mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
- if (!mbox) {
- lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY|LOG_MBOX,
- "2556 UNREG_VFI mbox allocation failed"
- "HBA state x%x\n",
- phba->pport->port_state);
- return;
- }
-
- lpfc_unreg_vfi(mbox, phba->pport);
- mbox->vport = phba->pport;
- mbox->mbox_cmpl = lpfc_unregister_vfi_cmpl;
-
- rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT);
- if (rc == MBX_NOT_FINISHED) {
- lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY|LOG_MBOX,
- "2557 UNREG_VFI issue mbox failed rc x%x "
- "HBA state x%x\n",
- rc, phba->pport->port_state);
- mempool_free(mbox, phba->mbox_mem_pool);
- return;
- }
-
- /* Unregister FCF */
- mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
- if (!mbox) {
- lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY|LOG_MBOX,
- "2551 UNREG_FCFI mbox allocation failed"
- "HBA state x%x\n",
- phba->pport->port_state);
- return;
- }
-
- lpfc_unreg_fcfi(mbox, phba->fcf.fcfi);
- mbox->vport = phba->pport;
- mbox->mbox_cmpl = lpfc_unregister_fcfi_cmpl;
- rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT);
-
- if (rc == MBX_NOT_FINISHED) {
- lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY|LOG_MBOX,
- "2552 UNREG_FCFI issue mbox failed rc x%x "
- "HBA state x%x\n",
- rc, phba->pport->port_state);
- mempool_free(mbox, phba->mbox_mem_pool);
- return;
- }
-
- spin_lock_irq(&phba->hbalock);
- phba->fcf.fcf_flag &= ~(FCF_AVAILABLE | FCF_REGISTERED |
- FCF_DISCOVERED | FCF_BOOT_ENABLE | FCF_IN_USE |
- FCF_VALID_VLAN);
- spin_unlock_irq(&phba->hbalock);
-
- /*
- * If driver is not unloading, check if there is any other
- * FCF record that can be used for discovery.
- */
- if ((phba->pport->load_flag & FC_UNLOADING) ||
- (phba->link_state < LPFC_LINK_UP))
- return;
-
- rc = lpfc_sli4_read_fcf_record(phba, LPFC_FCOE_FCF_GET_FIRST);
-
- if (rc)
- lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY|LOG_MBOX,
- "2553 lpfc_unregister_unused_fcf failed to read FCF"
- " record HBA state x%x\n",
- phba->pport->port_state);
+ lpfc_unregister_fcf_rescan(phba);
}
/**
diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h
index c9faa1d..89ff7c0 100644
--- a/drivers/scsi/lpfc/lpfc_hw.h
+++ b/drivers/scsi/lpfc/lpfc_hw.h
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2009 Emulex. All rights reserved. *
+ * Copyright (C) 2004-2010 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* *
@@ -1346,6 +1346,9 @@
#define MBX_HEARTBEAT 0x31
#define MBX_WRITE_VPARMS 0x32
#define MBX_ASYNCEVT_ENABLE 0x33
+#define MBX_READ_EVENT_LOG_STATUS 0x37
+#define MBX_READ_EVENT_LOG 0x38
+#define MBX_WRITE_EVENT_LOG 0x39
#define MBX_PORT_CAPABILITIES 0x3B
#define MBX_PORT_IOV_CONTROL 0x3C
@@ -1465,17 +1468,13 @@
#define CMD_IOCB_LOGENTRY_CN 0x94
#define CMD_IOCB_LOGENTRY_ASYNC_CN 0x96
-/* Unhandled Data Security SLI Commands */
-#define DSSCMD_IWRITE64_CR 0xD8
-#define DSSCMD_IWRITE64_CX 0xD9
-#define DSSCMD_IREAD64_CR 0xDA
-#define DSSCMD_IREAD64_CX 0xDB
-#define DSSCMD_INVALIDATE_DEK 0xDC
-#define DSSCMD_SET_KEK 0xDD
-#define DSSCMD_GET_KEK_ID 0xDE
-#define DSSCMD_GEN_XFER 0xDF
+/* Data Security SLI Commands */
+#define DSSCMD_IWRITE64_CR 0xF8
+#define DSSCMD_IWRITE64_CX 0xF9
+#define DSSCMD_IREAD64_CR 0xFA
+#define DSSCMD_IREAD64_CX 0xFB
-#define CMD_MAX_IOCB_CMD 0xE6
+#define CMD_MAX_IOCB_CMD 0xFB
#define CMD_IOCB_MASK 0xff
#define MAX_MSG_DATA 28 /* max msg data in CMD_ADAPTER_MSG
diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h
index 8a2a1c5..820015f 100644
--- a/drivers/scsi/lpfc/lpfc_hw4.h
+++ b/drivers/scsi/lpfc/lpfc_hw4.h
@@ -52,35 +52,37 @@
uint32_t addr_hi;
};
-#define LPFC_SLIREV_CONF_WORD 0x58
struct lpfc_sli_intf {
uint32_t word0;
-#define lpfc_sli_intf_iftype_MASK 0x00000007
-#define lpfc_sli_intf_iftype_SHIFT 0
-#define lpfc_sli_intf_iftype_WORD word0
-#define lpfc_sli_intf_rev_MASK 0x0000000f
-#define lpfc_sli_intf_rev_SHIFT 4
-#define lpfc_sli_intf_rev_WORD word0
-#define LPFC_SLIREV_CONF_SLI4 4
-#define lpfc_sli_intf_family_MASK 0x000000ff
-#define lpfc_sli_intf_family_SHIFT 8
-#define lpfc_sli_intf_family_WORD word0
-#define lpfc_sli_intf_feat1_MASK 0x000000ff
-#define lpfc_sli_intf_feat1_SHIFT 16
-#define lpfc_sli_intf_feat1_WORD word0
-#define lpfc_sli_intf_feat2_MASK 0x0000001f
-#define lpfc_sli_intf_feat2_SHIFT 24
-#define lpfc_sli_intf_feat2_WORD word0
-#define lpfc_sli_intf_valid_MASK 0x00000007
-#define lpfc_sli_intf_valid_SHIFT 29
-#define lpfc_sli_intf_valid_WORD word0
+#define lpfc_sli_intf_valid_SHIFT 29
+#define lpfc_sli_intf_valid_MASK 0x00000007
+#define lpfc_sli_intf_valid_WORD word0
#define LPFC_SLI_INTF_VALID 6
+#define lpfc_sli_intf_featurelevel2_SHIFT 24
+#define lpfc_sli_intf_featurelevel2_MASK 0x0000001F
+#define lpfc_sli_intf_featurelevel2_WORD word0
+#define lpfc_sli_intf_featurelevel1_SHIFT 16
+#define lpfc_sli_intf_featurelevel1_MASK 0x000000FF
+#define lpfc_sli_intf_featurelevel1_WORD word0
+#define LPFC_SLI_INTF_FEATURELEVEL1_1 1
+#define LPFC_SLI_INTF_FEATURELEVEL1_2 2
+#define lpfc_sli_intf_sli_family_SHIFT 8
+#define lpfc_sli_intf_sli_family_MASK 0x000000FF
+#define lpfc_sli_intf_sli_family_WORD word0
+#define LPFC_SLI_INTF_FAMILY_BE2 0
+#define LPFC_SLI_INTF_FAMILY_BE3 1
+#define lpfc_sli_intf_slirev_SHIFT 4
+#define lpfc_sli_intf_slirev_MASK 0x0000000F
+#define lpfc_sli_intf_slirev_WORD word0
+#define LPFC_SLI_INTF_REV_SLI3 3
+#define LPFC_SLI_INTF_REV_SLI4 4
+#define lpfc_sli_intf_if_type_SHIFT 0
+#define lpfc_sli_intf_if_type_MASK 0x00000007
+#define lpfc_sli_intf_if_type_WORD word0
+#define LPFC_SLI_INTF_IF_TYPE_0 0
+#define LPFC_SLI_INTF_IF_TYPE_1 1
};
-#define LPFC_SLI4_BAR0 1
-#define LPFC_SLI4_BAR1 2
-#define LPFC_SLI4_BAR2 4
-
#define LPFC_SLI4_MBX_EMBED true
#define LPFC_SLI4_MBX_NEMBED false
@@ -161,6 +163,9 @@
#define LPFC_FP_DEF_IMAX 10000
#define LPFC_SP_DEF_IMAX 10000
+/* PORT_CAPABILITIES constants. */
+#define LPFC_MAX_SUPPORTED_PAGES 8
+
struct ulp_bde64 {
union ULP_BDE_TUS {
uint32_t w;
@@ -516,7 +521,7 @@
#define LPFC_UERR_STATUS_LO 0x00A0
#define LPFC_UE_MASK_HI 0x00AC
#define LPFC_UE_MASK_LO 0x00A8
-#define LPFC_SCRATCHPAD 0x0058
+#define LPFC_SLI_INTF 0x0058
/* BAR0 Registers */
#define LPFC_HST_STATE 0x00AC
@@ -576,19 +581,6 @@
#define LPFC_POST_STAGE_ARMFW_READY 0xC000
#define LPFC_POST_STAGE_ARMFW_UE 0xF000
-#define lpfc_scratchpad_slirev_SHIFT 4
-#define lpfc_scratchpad_slirev_MASK 0xF
-#define lpfc_scratchpad_slirev_WORD word0
-#define lpfc_scratchpad_chiptype_SHIFT 8
-#define lpfc_scratchpad_chiptype_MASK 0xFF
-#define lpfc_scratchpad_chiptype_WORD word0
-#define lpfc_scratchpad_featurelevel1_SHIFT 16
-#define lpfc_scratchpad_featurelevel1_MASK 0xFF
-#define lpfc_scratchpad_featurelevel1_WORD word0
-#define lpfc_scratchpad_featurelevel2_SHIFT 24
-#define lpfc_scratchpad_featurelevel2_MASK 0xFF
-#define lpfc_scratchpad_featurelevel2_WORD word0
-
/* BAR1 Registers */
#define LPFC_IMR_MASK_ALL 0xFFFFFFFF
#define LPFC_ISCR_CLEAR_ALL 0xFFFFFFFF
@@ -801,6 +793,7 @@
#define LPFC_MBOX_OPCODE_FCOE_ADD_FCF 0x09
#define LPFC_MBOX_OPCODE_FCOE_DELETE_FCF 0x0A
#define LPFC_MBOX_OPCODE_FCOE_POST_HDR_TEMPLATE 0x0B
+#define LPFC_MBOX_OPCODE_FCOE_REDISCOVER_FCF 0x10
/* Mailbox command structures */
struct eq_context {
@@ -1149,10 +1142,7 @@
this flag !! */
#define lpfc_sli4_sge_last_MASK 0x00000001
#define lpfc_sli4_sge_last_WORD word2
- uint32_t word3;
-#define lpfc_sli4_sge_len_SHIFT 0
-#define lpfc_sli4_sge_len_MASK 0x0001FFFF
-#define lpfc_sli4_sge_len_WORD word3
+ uint32_t sge_len;
};
struct fcf_record {
@@ -1301,6 +1291,19 @@
#define lpfc_mbx_del_fcf_tbl_index_WORD word10
};
+struct lpfc_mbx_redisc_fcf_tbl {
+ struct mbox_header header;
+ uint32_t word10;
+#define lpfc_mbx_redisc_fcf_count_SHIFT 0
+#define lpfc_mbx_redisc_fcf_count_MASK 0x0000FFFF
+#define lpfc_mbx_redisc_fcf_count_WORD word10
+ uint32_t resvd;
+ uint32_t word12;
+#define lpfc_mbx_redisc_fcf_index_SHIFT 0
+#define lpfc_mbx_redisc_fcf_index_MASK 0x0000FFFF
+#define lpfc_mbx_redisc_fcf_index_WORD word12
+};
+
struct lpfc_mbx_query_fw_cfg {
struct mbox_header header;
uint32_t config_number;
@@ -1834,6 +1837,177 @@
#define lpfc_mbx_rq_ftr_rsp_ifip_WORD word3
};
+struct lpfc_mbx_supp_pages {
+ uint32_t word1;
+#define qs_SHIFT 0
+#define qs_MASK 0x00000001
+#define qs_WORD word1
+#define wr_SHIFT 1
+#define wr_MASK 0x00000001
+#define wr_WORD word1
+#define pf_SHIFT 8
+#define pf_MASK 0x000000ff
+#define pf_WORD word1
+#define cpn_SHIFT 16
+#define cpn_MASK 0x000000ff
+#define cpn_WORD word1
+ uint32_t word2;
+#define list_offset_SHIFT 0
+#define list_offset_MASK 0x000000ff
+#define list_offset_WORD word2
+#define next_offset_SHIFT 8
+#define next_offset_MASK 0x000000ff
+#define next_offset_WORD word2
+#define elem_cnt_SHIFT 16
+#define elem_cnt_MASK 0x000000ff
+#define elem_cnt_WORD word2
+ uint32_t word3;
+#define pn_0_SHIFT 24
+#define pn_0_MASK 0x000000ff
+#define pn_0_WORD word3
+#define pn_1_SHIFT 16
+#define pn_1_MASK 0x000000ff
+#define pn_1_WORD word3
+#define pn_2_SHIFT 8
+#define pn_2_MASK 0x000000ff
+#define pn_2_WORD word3
+#define pn_3_SHIFT 0
+#define pn_3_MASK 0x000000ff
+#define pn_3_WORD word3
+ uint32_t word4;
+#define pn_4_SHIFT 24
+#define pn_4_MASK 0x000000ff
+#define pn_4_WORD word4
+#define pn_5_SHIFT 16
+#define pn_5_MASK 0x000000ff
+#define pn_5_WORD word4
+#define pn_6_SHIFT 8
+#define pn_6_MASK 0x000000ff
+#define pn_6_WORD word4
+#define pn_7_SHIFT 0
+#define pn_7_MASK 0x000000ff
+#define pn_7_WORD word4
+ uint32_t rsvd[27];
+#define LPFC_SUPP_PAGES 0
+#define LPFC_BLOCK_GUARD_PROFILES 1
+#define LPFC_SLI4_PARAMETERS 2
+};
+
+struct lpfc_mbx_sli4_params {
+ uint32_t word1;
+#define qs_SHIFT 0
+#define qs_MASK 0x00000001
+#define qs_WORD word1
+#define wr_SHIFT 1
+#define wr_MASK 0x00000001
+#define wr_WORD word1
+#define pf_SHIFT 8
+#define pf_MASK 0x000000ff
+#define pf_WORD word1
+#define cpn_SHIFT 16
+#define cpn_MASK 0x000000ff
+#define cpn_WORD word1
+ uint32_t word2;
+#define if_type_SHIFT 0
+#define if_type_MASK 0x00000007
+#define if_type_WORD word2
+#define sli_rev_SHIFT 4
+#define sli_rev_MASK 0x0000000f
+#define sli_rev_WORD word2
+#define sli_family_SHIFT 8
+#define sli_family_MASK 0x000000ff
+#define sli_family_WORD word2
+#define featurelevel_1_SHIFT 16
+#define featurelevel_1_MASK 0x000000ff
+#define featurelevel_1_WORD word2
+#define featurelevel_2_SHIFT 24
+#define featurelevel_2_MASK 0x0000001f
+#define featurelevel_2_WORD word2
+ uint32_t word3;
+#define fcoe_SHIFT 0
+#define fcoe_MASK 0x00000001
+#define fcoe_WORD word3
+#define fc_SHIFT 1
+#define fc_MASK 0x00000001
+#define fc_WORD word3
+#define nic_SHIFT 2
+#define nic_MASK 0x00000001
+#define nic_WORD word3
+#define iscsi_SHIFT 3
+#define iscsi_MASK 0x00000001
+#define iscsi_WORD word3
+#define rdma_SHIFT 4
+#define rdma_MASK 0x00000001
+#define rdma_WORD word3
+ uint32_t sge_supp_len;
+ uint32_t word5;
+#define if_page_sz_SHIFT 0
+#define if_page_sz_MASK 0x0000ffff
+#define if_page_sz_WORD word5
+#define loopbk_scope_SHIFT 24
+#define loopbk_scope_MASK 0x0000000f
+#define loopbk_scope_WORD word5
+#define rq_db_window_SHIFT 28
+#define rq_db_window_MASK 0x0000000f
+#define rq_db_window_WORD word5
+ uint32_t word6;
+#define eq_pages_SHIFT 0
+#define eq_pages_MASK 0x0000000f
+#define eq_pages_WORD word6
+#define eqe_size_SHIFT 8
+#define eqe_size_MASK 0x000000ff
+#define eqe_size_WORD word6
+ uint32_t word7;
+#define cq_pages_SHIFT 0
+#define cq_pages_MASK 0x0000000f
+#define cq_pages_WORD word7
+#define cqe_size_SHIFT 8
+#define cqe_size_MASK 0x000000ff
+#define cqe_size_WORD word7
+ uint32_t word8;
+#define mq_pages_SHIFT 0
+#define mq_pages_MASK 0x0000000f
+#define mq_pages_WORD word8
+#define mqe_size_SHIFT 8
+#define mqe_size_MASK 0x000000ff
+#define mqe_size_WORD word8
+#define mq_elem_cnt_SHIFT 16
+#define mq_elem_cnt_MASK 0x000000ff
+#define mq_elem_cnt_WORD word8
+ uint32_t word9;
+#define wq_pages_SHIFT 0
+#define wq_pages_MASK 0x0000ffff
+#define wq_pages_WORD word9
+#define wqe_size_SHIFT 8
+#define wqe_size_MASK 0x000000ff
+#define wqe_size_WORD word9
+ uint32_t word10;
+#define rq_pages_SHIFT 0
+#define rq_pages_MASK 0x0000ffff
+#define rq_pages_WORD word10
+#define rqe_size_SHIFT 8
+#define rqe_size_MASK 0x000000ff
+#define rqe_size_WORD word10
+ uint32_t word11;
+#define hdr_pages_SHIFT 0
+#define hdr_pages_MASK 0x0000000f
+#define hdr_pages_WORD word11
+#define hdr_size_SHIFT 8
+#define hdr_size_MASK 0x0000000f
+#define hdr_size_WORD word11
+#define hdr_pp_align_SHIFT 16
+#define hdr_pp_align_MASK 0x0000ffff
+#define hdr_pp_align_WORD word11
+ uint32_t word12;
+#define sgl_pages_SHIFT 0
+#define sgl_pages_MASK 0x0000000f
+#define sgl_pages_WORD word12
+#define sgl_pp_align_SHIFT 16
+#define sgl_pp_align_MASK 0x0000ffff
+#define sgl_pp_align_WORD word12
+ uint32_t rsvd_13_63[51];
+};
+
/* Mailbox Completion Queue Error Messages */
#define MB_CQE_STATUS_SUCCESS 0x0
#define MB_CQE_STATUS_INSUFFICIENT_PRIVILEGES 0x1
@@ -1863,6 +2037,7 @@
struct lpfc_mbx_read_fcf_tbl read_fcf_tbl;
struct lpfc_mbx_add_fcf_tbl_entry add_fcf_entry;
struct lpfc_mbx_del_fcf_tbl_entry del_fcf_entry;
+ struct lpfc_mbx_redisc_fcf_tbl redisc_fcf_tbl;
struct lpfc_mbx_reg_fcfi reg_fcfi;
struct lpfc_mbx_unreg_fcfi unreg_fcfi;
struct lpfc_mbx_mq_create mq_create;
@@ -1883,6 +2058,8 @@
struct lpfc_mbx_request_features req_ftrs;
struct lpfc_mbx_post_hdr_tmpl hdr_tmpl;
struct lpfc_mbx_query_fw_cfg query_fw_cfg;
+ struct lpfc_mbx_supp_pages supp_pages;
+ struct lpfc_mbx_sli4_params sli4_params;
struct lpfc_mbx_nop nop;
} un;
};
@@ -1959,6 +2136,9 @@
#define LPFC_ASYNC_LINK_FAULT_NONE 0x0
#define LPFC_ASYNC_LINK_FAULT_LOCAL 0x1
#define LPFC_ASYNC_LINK_FAULT_REMOTE 0x2
+#define lpfc_acqe_qos_link_speed_SHIFT 16
+#define lpfc_acqe_qos_link_speed_MASK 0x0000FFFF
+#define lpfc_acqe_qos_link_speed_WORD word1
uint32_t event_tag;
uint32_t trailer;
};
@@ -1976,6 +2156,7 @@
#define LPFC_FCOE_EVENT_TYPE_FCF_TABLE_FULL 0x2
#define LPFC_FCOE_EVENT_TYPE_FCF_DEAD 0x3
#define LPFC_FCOE_EVENT_TYPE_CVL 0x4
+#define LPFC_FCOE_EVENT_TYPE_FCF_PARAM_MOD 0x5
uint32_t event_tag;
uint32_t trailer;
};
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index b8eb1b6..d29ac7c 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2009 Emulex. All rights reserved. *
+ * Copyright (C) 2004-2010 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* Portions Copyright (C) 2004-2005 Christoph Hellwig *
@@ -544,7 +544,7 @@
mempool_free(pmb, phba->mbox_mem_pool);
return -EIO;
}
- } else {
+ } else if (phba->cfg_suppress_link_up == 0) {
lpfc_init_link(phba, pmb, phba->cfg_topology,
phba->cfg_link_speed);
pmb->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
@@ -603,6 +603,102 @@
}
/**
+ * lpfc_hba_init_link - Initialize the FC link
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine will issue the INIT_LINK mailbox command call.
+ * It is available to other drivers through the lpfc_hba data
+ * structure for use as a delayed link up mechanism with the
+ * module parameter lpfc_suppress_link_up.
+ *
+ * Return code
+ * 0 - success
+ * Any other value - error
+ **/
+int
+lpfc_hba_init_link(struct lpfc_hba *phba)
+{
+ struct lpfc_vport *vport = phba->pport;
+ LPFC_MBOXQ_t *pmb;
+ MAILBOX_t *mb;
+ int rc;
+
+ pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!pmb) {
+ phba->link_state = LPFC_HBA_ERROR;
+ return -ENOMEM;
+ }
+ mb = &pmb->u.mb;
+ pmb->vport = vport;
+
+ lpfc_init_link(phba, pmb, phba->cfg_topology,
+ phba->cfg_link_speed);
+ pmb->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
+ lpfc_set_loopback_flag(phba);
+ rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
+ if (rc != MBX_SUCCESS) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0498 Adapter failed to init, mbxCmd x%x "
+ "INIT_LINK, mbxStatus x%x\n",
+ mb->mbxCommand, mb->mbxStatus);
+ /* Clear all interrupt enable conditions */
+ writel(0, phba->HCregaddr);
+ readl(phba->HCregaddr); /* flush */
+ /* Clear all pending interrupts */
+ writel(0xffffffff, phba->HAregaddr);
+ readl(phba->HAregaddr); /* flush */
+ phba->link_state = LPFC_HBA_ERROR;
+ if (rc != MBX_BUSY)
+ mempool_free(pmb, phba->mbox_mem_pool);
+ return -EIO;
+ }
+ phba->cfg_suppress_link_up = 0;
+
+ return 0;
+}
+
+/**
+ * lpfc_hba_down_link - this routine downs the FC link
+ *
+ * This routine will issue the DOWN_LINK mailbox command call.
+ * It is available to other drivers through the lpfc_hba data
+ * structure for use to stop the link.
+ *
+ * Return code
+ * 0 - success
+ * Any other value - error
+ **/
+int
+lpfc_hba_down_link(struct lpfc_hba *phba)
+{
+ LPFC_MBOXQ_t *pmb;
+ int rc;
+
+ pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!pmb) {
+ phba->link_state = LPFC_HBA_ERROR;
+ return -ENOMEM;
+ }
+
+ lpfc_printf_log(phba,
+ KERN_ERR, LOG_INIT,
+ "0491 Adapter Link is disabled.\n");
+ lpfc_down_link(phba, pmb);
+ pmb->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
+ rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
+ if ((rc != MBX_SUCCESS) && (rc != MBX_BUSY)) {
+ lpfc_printf_log(phba,
+ KERN_ERR, LOG_INIT,
+ "2522 Adapter failed to issue DOWN_LINK"
+ " mbox command rc 0x%x\n", rc);
+
+ mempool_free(pmb, phba->mbox_mem_pool);
+ return -EIO;
+ }
+ return 0;
+}
+
+/**
* lpfc_hba_down_prep - Perform lpfc uninitialization prior to HBA reset
* @phba: pointer to lpfc HBA data structure.
*
@@ -2073,6 +2169,44 @@
}
/**
+ * __lpfc_sli4_stop_fcf_redisc_wait_timer - Stop FCF rediscovery wait timer
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine stops the SLI4 FCF rediscover wait timer if it's on. The
+ * caller of this routine should already hold the host lock.
+ **/
+void
+__lpfc_sli4_stop_fcf_redisc_wait_timer(struct lpfc_hba *phba)
+{
+ /* Clear pending FCF rediscovery wait timer */
+ phba->fcf.fcf_flag &= ~FCF_REDISC_PEND;
+ /* Now, try to stop the timer */
+ del_timer(&phba->fcf.redisc_wait);
+}
+
+/**
+ * lpfc_sli4_stop_fcf_redisc_wait_timer - Stop FCF rediscovery wait timer
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine stops the SLI4 FCF rediscover wait timer if it's on. It
+ * checks whether the FCF rediscovery wait timer is pending with the host
+ * lock held before proceeding with disabling the timer and clearing the
+ * wait timer pendig flag.
+ **/
+void
+lpfc_sli4_stop_fcf_redisc_wait_timer(struct lpfc_hba *phba)
+{
+ spin_lock_irq(&phba->hbalock);
+ if (!(phba->fcf.fcf_flag & FCF_REDISC_PEND)) {
+ /* FCF rediscovery timer already fired or stopped */
+ spin_unlock_irq(&phba->hbalock);
+ return;
+ }
+ __lpfc_sli4_stop_fcf_redisc_wait_timer(phba);
+ spin_unlock_irq(&phba->hbalock);
+}
+
+/**
* lpfc_stop_hba_timers - Stop all the timers associated with an HBA
* @phba: pointer to lpfc hba data structure.
*
@@ -2096,6 +2230,7 @@
break;
case LPFC_PCI_DEV_OC:
/* Stop any OneConnect device sepcific driver timers */
+ lpfc_sli4_stop_fcf_redisc_wait_timer(phba);
break;
default:
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
@@ -2228,6 +2363,7 @@
struct lpfc_vport *vport = phba->pport;
struct lpfc_nodelist *ndlp, *next_ndlp;
struct lpfc_vport **vports;
+ struct Scsi_Host *shost;
int i;
if (vport->fc_flag & FC_OFFLINE_MODE)
@@ -2241,11 +2377,15 @@
vports = lpfc_create_vport_work_array(phba);
if (vports != NULL) {
for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
- struct Scsi_Host *shost;
-
if (vports[i]->load_flag & FC_UNLOADING)
continue;
+ shost = lpfc_shost_from_vport(vports[i]);
+ spin_lock_irq(shost->host_lock);
vports[i]->vpi_state &= ~LPFC_VPI_REGISTERED;
+ vports[i]->fc_flag |= FC_VPORT_NEEDS_REG_VPI;
+ vports[i]->fc_flag &= ~FC_VFI_REGISTERED;
+ spin_unlock_irq(shost->host_lock);
+
shost = lpfc_shost_from_vport(vports[i]);
list_for_each_entry_safe(ndlp, next_ndlp,
&vports[i]->fc_nodes,
@@ -2401,7 +2541,8 @@
shost->this_id = -1;
shost->max_cmd_len = 16;
if (phba->sli_rev == LPFC_SLI_REV4) {
- shost->dma_boundary = LPFC_SLI4_MAX_SEGMENT_SIZE;
+ shost->dma_boundary =
+ phba->sli4_hba.pc_sli4_params.sge_supp_len;
shost->sg_tablesize = phba->cfg_sg_seg_cnt;
}
@@ -2650,8 +2791,6 @@
lpfc_stop_hba_timers(phba);
phba->pport->work_port_events = 0;
phba->sli4_hba.intr_enable = 0;
- /* Hard clear it for now, shall have more graceful way to wait later */
- phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
}
/**
@@ -2703,7 +2842,7 @@
del_fcf_record = &mboxq->u.mqe.un.del_fcf_entry;
bf_set(lpfc_mbx_del_fcf_tbl_count, del_fcf_record, 1);
bf_set(lpfc_mbx_del_fcf_tbl_index, del_fcf_record,
- phba->fcf.fcf_indx);
+ phba->fcf.current_rec.fcf_indx);
if (!phba->sli4_hba.intr_enable)
rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
@@ -2727,6 +2866,57 @@
}
/**
+ * lpfc_fcf_redisc_wait_start_timer - Start fcf rediscover wait timer
+ * @phba: Pointer to hba for which this call is being executed.
+ *
+ * This routine starts the timer waiting for the FCF rediscovery to complete.
+ **/
+void
+lpfc_fcf_redisc_wait_start_timer(struct lpfc_hba *phba)
+{
+ unsigned long fcf_redisc_wait_tmo =
+ (jiffies + msecs_to_jiffies(LPFC_FCF_REDISCOVER_WAIT_TMO));
+ /* Start fcf rediscovery wait period timer */
+ mod_timer(&phba->fcf.redisc_wait, fcf_redisc_wait_tmo);
+ spin_lock_irq(&phba->hbalock);
+ /* Allow action to new fcf asynchronous event */
+ phba->fcf.fcf_flag &= ~(FCF_AVAILABLE | FCF_SCAN_DONE);
+ /* Mark the FCF rediscovery pending state */
+ phba->fcf.fcf_flag |= FCF_REDISC_PEND;
+ spin_unlock_irq(&phba->hbalock);
+}
+
+/**
+ * lpfc_sli4_fcf_redisc_wait_tmo - FCF table rediscover wait timeout
+ * @ptr: Map to lpfc_hba data structure pointer.
+ *
+ * This routine is invoked when waiting for FCF table rediscover has been
+ * timed out. If new FCF record(s) has (have) been discovered during the
+ * wait period, a new FCF event shall be added to the FCOE async event
+ * list, and then worker thread shall be waked up for processing from the
+ * worker thread context.
+ **/
+void
+lpfc_sli4_fcf_redisc_wait_tmo(unsigned long ptr)
+{
+ struct lpfc_hba *phba = (struct lpfc_hba *)ptr;
+
+ /* Don't send FCF rediscovery event if timer cancelled */
+ spin_lock_irq(&phba->hbalock);
+ if (!(phba->fcf.fcf_flag & FCF_REDISC_PEND)) {
+ spin_unlock_irq(&phba->hbalock);
+ return;
+ }
+ /* Clear FCF rediscovery timer pending flag */
+ phba->fcf.fcf_flag &= ~FCF_REDISC_PEND;
+ /* FCF rediscovery event to worker thread */
+ phba->fcf.fcf_flag |= FCF_REDISC_EVT;
+ spin_unlock_irq(&phba->hbalock);
+ /* wake up worker thread */
+ lpfc_worker_wake_up(phba);
+}
+
+/**
* lpfc_sli4_fw_cfg_check - Read the firmware config and verify FCoE support
* @phba: pointer to lpfc hba data structure.
*
@@ -2978,6 +3168,8 @@
bf_get(lpfc_acqe_link_physical, acqe_link);
phba->sli4_hba.link_state.fault =
bf_get(lpfc_acqe_link_fault, acqe_link);
+ phba->sli4_hba.link_state.logical_speed =
+ bf_get(lpfc_acqe_qos_link_speed, acqe_link);
/* Invoke the lpfc_handle_latt mailbox command callback function */
lpfc_mbx_cmpl_read_la(phba, pmb);
@@ -3007,22 +3199,34 @@
struct lpfc_nodelist *ndlp;
struct Scsi_Host *shost;
uint32_t link_state;
+ int active_vlink_present;
+ struct lpfc_vport **vports;
+ int i;
phba->fc_eventTag = acqe_fcoe->event_tag;
phba->fcoe_eventtag = acqe_fcoe->event_tag;
switch (event_type) {
case LPFC_FCOE_EVENT_TYPE_NEW_FCF:
+ case LPFC_FCOE_EVENT_TYPE_FCF_PARAM_MOD:
lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY,
"2546 New FCF found index 0x%x tag 0x%x\n",
acqe_fcoe->index,
acqe_fcoe->event_tag);
- /*
- * If the current FCF is in discovered state, or
- * FCF discovery is in progress do nothing.
- */
spin_lock_irq(&phba->hbalock);
- if ((phba->fcf.fcf_flag & FCF_DISCOVERED) ||
- (phba->hba_flag & FCF_DISC_INPROGRESS)) {
+ if ((phba->fcf.fcf_flag & FCF_SCAN_DONE) ||
+ (phba->hba_flag & FCF_DISC_INPROGRESS)) {
+ /*
+ * If the current FCF is in discovered state or
+ * FCF discovery is in progress, do nothing.
+ */
+ spin_unlock_irq(&phba->hbalock);
+ break;
+ }
+ if (phba->fcf.fcf_flag & FCF_REDISC_EVT) {
+ /*
+ * If fast FCF failover rescan event is pending,
+ * do nothing.
+ */
spin_unlock_irq(&phba->hbalock);
break;
}
@@ -3049,7 +3253,7 @@
" tag 0x%x\n", acqe_fcoe->index,
acqe_fcoe->event_tag);
/* If the event is not for currently used fcf do nothing */
- if (phba->fcf.fcf_indx != acqe_fcoe->index)
+ if (phba->fcf.current_rec.fcf_indx != acqe_fcoe->index)
break;
/*
* Currently, driver support only one FCF - so treat this as
@@ -3074,14 +3278,58 @@
if (!ndlp)
break;
shost = lpfc_shost_from_vport(vport);
+ if (phba->pport->port_state <= LPFC_FLOGI)
+ break;
+ /* If virtual link is not yet instantiated ignore CVL */
+ if (vport->port_state <= LPFC_FDISC)
+ break;
+
lpfc_linkdown_port(vport);
- if (vport->port_type != LPFC_NPIV_PORT) {
+ lpfc_cleanup_pending_mbox(vport);
+ spin_lock_irq(shost->host_lock);
+ vport->fc_flag |= FC_VPORT_CVL_RCVD;
+ spin_unlock_irq(shost->host_lock);
+ active_vlink_present = 0;
+
+ vports = lpfc_create_vport_work_array(phba);
+ if (vports) {
+ for (i = 0; i <= phba->max_vports && vports[i] != NULL;
+ i++) {
+ if ((!(vports[i]->fc_flag &
+ FC_VPORT_CVL_RCVD)) &&
+ (vports[i]->port_state > LPFC_FDISC)) {
+ active_vlink_present = 1;
+ break;
+ }
+ }
+ lpfc_destroy_vport_work_array(phba, vports);
+ }
+
+ if (active_vlink_present) {
+ /*
+ * If there are other active VLinks present,
+ * re-instantiate the Vlink using FDISC.
+ */
mod_timer(&ndlp->nlp_delayfunc, jiffies + HZ);
spin_lock_irq(shost->host_lock);
ndlp->nlp_flag |= NLP_DELAY_TMO;
spin_unlock_irq(shost->host_lock);
- ndlp->nlp_last_elscmd = ELS_CMD_FLOGI;
- vport->port_state = LPFC_FLOGI;
+ ndlp->nlp_last_elscmd = ELS_CMD_FDISC;
+ vport->port_state = LPFC_FDISC;
+ } else {
+ /*
+ * Otherwise, we request port to rediscover
+ * the entire FCF table for a fast recovery
+ * from possible case that the current FCF
+ * is no longer valid.
+ */
+ rc = lpfc_sli4_redisc_fcf_table(phba);
+ if (rc)
+ /*
+ * Last resort will be re-try on the
+ * the current registered FCF entry.
+ */
+ lpfc_retry_pport_discovery(phba);
}
break;
default:
@@ -3158,6 +3406,34 @@
}
/**
+ * lpfc_sli4_fcf_redisc_event_proc - Process fcf table rediscovery event
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked by the worker thread to process FCF table
+ * rediscovery pending completion event.
+ **/
+void lpfc_sli4_fcf_redisc_event_proc(struct lpfc_hba *phba)
+{
+ int rc;
+
+ spin_lock_irq(&phba->hbalock);
+ /* Clear FCF rediscovery timeout event */
+ phba->fcf.fcf_flag &= ~FCF_REDISC_EVT;
+ /* Clear driver fast failover FCF record flag */
+ phba->fcf.failover_rec.flag = 0;
+ /* Set state for FCF fast failover */
+ phba->fcf.fcf_flag |= FCF_REDISC_FOV;
+ spin_unlock_irq(&phba->hbalock);
+
+ /* Scan FCF table from the first entry to re-discover SAN */
+ rc = lpfc_sli4_read_fcf_record(phba, LPFC_FCOE_FCF_GET_FIRST);
+ if (rc)
+ lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY,
+ "2747 Post FCF rediscovery read FCF record "
+ "failed 0x%x\n", rc);
+}
+
+/**
* lpfc_api_table_setup - Set up per hba pci-device group func api jump table
* @phba: pointer to lpfc hba data structure.
* @dev_grp: The HBA PCI-Device group number.
@@ -3442,8 +3718,10 @@
lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba)
{
struct lpfc_sli *psli;
- int rc;
- int i, hbq_count;
+ LPFC_MBOXQ_t *mboxq;
+ int rc, i, hbq_count, buf_size, dma_buf_size, max_buf_size;
+ uint8_t pn_page[LPFC_MAX_SUPPORTED_PAGES] = {0};
+ struct lpfc_mqe *mqe;
/* Before proceed, wait for POST done and device ready */
rc = lpfc_sli4_post_status_check(phba);
@@ -3472,6 +3750,11 @@
init_timer(&phba->eratt_poll);
phba->eratt_poll.function = lpfc_poll_eratt;
phba->eratt_poll.data = (unsigned long) phba;
+ /* FCF rediscover timer */
+ init_timer(&phba->fcf.redisc_wait);
+ phba->fcf.redisc_wait.function = lpfc_sli4_fcf_redisc_wait_tmo;
+ phba->fcf.redisc_wait.data = (unsigned long)phba;
+
/*
* We need to do a READ_CONFIG mailbox command here before
* calling lpfc_get_cfgparam. For VFs this will report the
@@ -3496,31 +3779,26 @@
* used to create the sg_dma_buf_pool must be dynamically calculated.
* 2 segments are added since the IOCB needs a command and response bde.
* To insure that the scsi sgl does not cross a 4k page boundary only
- * sgl sizes of 1k, 2k, 4k, and 8k are supported.
- * Table of sgl sizes and seg_cnt:
- * sgl size, sg_seg_cnt total seg
- * 1k 50 52
- * 2k 114 116
- * 4k 242 244
- * 8k 498 500
- * cmd(32) + rsp(160) + (52 * sizeof(sli4_sge)) = 1024
- * cmd(32) + rsp(160) + (116 * sizeof(sli4_sge)) = 2048
- * cmd(32) + rsp(160) + (244 * sizeof(sli4_sge)) = 4096
- * cmd(32) + rsp(160) + (500 * sizeof(sli4_sge)) = 8192
+ * sgl sizes of must be a power of 2.
*/
- if (phba->cfg_sg_seg_cnt <= LPFC_DEFAULT_SG_SEG_CNT)
- phba->cfg_sg_seg_cnt = 50;
- else if (phba->cfg_sg_seg_cnt <= 114)
- phba->cfg_sg_seg_cnt = 114;
- else if (phba->cfg_sg_seg_cnt <= 242)
- phba->cfg_sg_seg_cnt = 242;
+ buf_size = (sizeof(struct fcp_cmnd) + sizeof(struct fcp_rsp) +
+ ((phba->cfg_sg_seg_cnt + 2) * sizeof(struct sli4_sge)));
+ /* Feature Level 1 hardware is limited to 2 pages */
+ if ((bf_get(lpfc_sli_intf_featurelevel1, &phba->sli4_hba.sli_intf) ==
+ LPFC_SLI_INTF_FEATURELEVEL1_1))
+ max_buf_size = LPFC_SLI4_FL1_MAX_BUF_SIZE;
else
- phba->cfg_sg_seg_cnt = 498;
-
- phba->cfg_sg_dma_buf_size = sizeof(struct fcp_cmnd)
- + sizeof(struct fcp_rsp);
- phba->cfg_sg_dma_buf_size +=
- ((phba->cfg_sg_seg_cnt + 2) * sizeof(struct sli4_sge));
+ max_buf_size = LPFC_SLI4_MAX_BUF_SIZE;
+ for (dma_buf_size = LPFC_SLI4_MIN_BUF_SIZE;
+ dma_buf_size < max_buf_size && buf_size > dma_buf_size;
+ dma_buf_size = dma_buf_size << 1)
+ ;
+ if (dma_buf_size == max_buf_size)
+ phba->cfg_sg_seg_cnt = (dma_buf_size -
+ sizeof(struct fcp_cmnd) - sizeof(struct fcp_rsp) -
+ (2 * sizeof(struct sli4_sge))) /
+ sizeof(struct sli4_sge);
+ phba->cfg_sg_dma_buf_size = dma_buf_size;
/* Initialize buffer queue management fields */
hbq_count = lpfc_sli_hbq_count();
@@ -3638,6 +3916,43 @@
goto out_free_fcp_eq_hdl;
}
+ mboxq = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool,
+ GFP_KERNEL);
+ if (!mboxq) {
+ rc = -ENOMEM;
+ goto out_free_fcp_eq_hdl;
+ }
+
+ /* Get the Supported Pages. It is always available. */
+ lpfc_supported_pages(mboxq);
+ rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+ if (unlikely(rc)) {
+ rc = -EIO;
+ mempool_free(mboxq, phba->mbox_mem_pool);
+ goto out_free_fcp_eq_hdl;
+ }
+
+ mqe = &mboxq->u.mqe;
+ memcpy(&pn_page[0], ((uint8_t *)&mqe->un.supp_pages.word3),
+ LPFC_MAX_SUPPORTED_PAGES);
+ for (i = 0; i < LPFC_MAX_SUPPORTED_PAGES; i++) {
+ switch (pn_page[i]) {
+ case LPFC_SLI4_PARAMETERS:
+ phba->sli4_hba.pc_sli4_params.supported = 1;
+ break;
+ default:
+ break;
+ }
+ }
+
+ /* Read the port's SLI4 Parameters capabilities if supported. */
+ if (phba->sli4_hba.pc_sli4_params.supported)
+ rc = lpfc_pc_sli4_params_get(phba, mboxq);
+ mempool_free(mboxq, phba->mbox_mem_pool);
+ if (rc) {
+ rc = -EIO;
+ goto out_free_fcp_eq_hdl;
+ }
return rc;
out_free_fcp_eq_hdl:
@@ -3733,6 +4048,8 @@
int
lpfc_init_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp)
{
+ phba->lpfc_hba_init_link = lpfc_hba_init_link;
+ phba->lpfc_hba_down_link = lpfc_hba_down_link;
switch (dev_grp) {
case LPFC_PCI_DEV_LP:
phba->lpfc_hba_down_post = lpfc_hba_down_post_s3;
@@ -4291,7 +4608,7 @@
return NULL;
}
- mutex_init(&phba->ct_event_mutex);
+ spin_lock_init(&phba->ct_ev_lock);
INIT_LIST_HEAD(&phba->ct_ev_waiters);
return phba;
@@ -4641,7 +4958,7 @@
int
lpfc_sli4_post_status_check(struct lpfc_hba *phba)
{
- struct lpfc_register sta_reg, uerrlo_reg, uerrhi_reg, scratchpad;
+ struct lpfc_register sta_reg, uerrlo_reg, uerrhi_reg;
int i, port_error = -ENODEV;
if (!phba->sli4_hba.STAregaddr)
@@ -4677,14 +4994,21 @@
bf_get(lpfc_hst_state_port_status, &sta_reg));
/* Log device information */
- scratchpad.word0 = readl(phba->sli4_hba.SCRATCHPADregaddr);
- lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
- "2534 Device Info: ChipType=0x%x, SliRev=0x%x, "
- "FeatureL1=0x%x, FeatureL2=0x%x\n",
- bf_get(lpfc_scratchpad_chiptype, &scratchpad),
- bf_get(lpfc_scratchpad_slirev, &scratchpad),
- bf_get(lpfc_scratchpad_featurelevel1, &scratchpad),
- bf_get(lpfc_scratchpad_featurelevel2, &scratchpad));
+ phba->sli4_hba.sli_intf.word0 = readl(phba->sli4_hba.SLIINTFregaddr);
+ if (bf_get(lpfc_sli_intf_valid,
+ &phba->sli4_hba.sli_intf) == LPFC_SLI_INTF_VALID) {
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "2534 Device Info: ChipType=0x%x, SliRev=0x%x, "
+ "FeatureL1=0x%x, FeatureL2=0x%x\n",
+ bf_get(lpfc_sli_intf_sli_family,
+ &phba->sli4_hba.sli_intf),
+ bf_get(lpfc_sli_intf_slirev,
+ &phba->sli4_hba.sli_intf),
+ bf_get(lpfc_sli_intf_featurelevel1,
+ &phba->sli4_hba.sli_intf),
+ bf_get(lpfc_sli_intf_featurelevel2,
+ &phba->sli4_hba.sli_intf));
+ }
phba->sli4_hba.ue_mask_lo = readl(phba->sli4_hba.UEMASKLOregaddr);
phba->sli4_hba.ue_mask_hi = readl(phba->sli4_hba.UEMASKHIregaddr);
/* With uncoverable error, log the error message and return error */
@@ -4723,8 +5047,8 @@
LPFC_UE_MASK_LO;
phba->sli4_hba.UEMASKHIregaddr = phba->sli4_hba.conf_regs_memmap_p +
LPFC_UE_MASK_HI;
- phba->sli4_hba.SCRATCHPADregaddr = phba->sli4_hba.conf_regs_memmap_p +
- LPFC_SCRATCHPAD;
+ phba->sli4_hba.SLIINTFregaddr = phba->sli4_hba.conf_regs_memmap_p +
+ LPFC_SLI_INTF;
}
/**
@@ -5999,7 +6323,7 @@
spin_lock_irqsave(&phba->hbalock, flags);
/* Mark the FCFI is no longer registered */
phba->fcf.fcf_flag &=
- ~(FCF_AVAILABLE | FCF_REGISTERED | FCF_DISCOVERED);
+ ~(FCF_AVAILABLE | FCF_REGISTERED | FCF_SCAN_DONE);
spin_unlock_irqrestore(&phba->hbalock, flags);
}
}
@@ -6039,16 +6363,20 @@
/* Get the bus address of SLI4 device Bar0, Bar1, and Bar2 and the
* number of bytes required by each mapping. They are actually
- * mapping to the PCI BAR regions 1, 2, and 4 by the SLI4 device.
+ * mapping to the PCI BAR regions 0 or 1, 2, and 4 by the SLI4 device.
*/
- phba->pci_bar0_map = pci_resource_start(pdev, LPFC_SLI4_BAR0);
- bar0map_len = pci_resource_len(pdev, LPFC_SLI4_BAR0);
+ if (pci_resource_start(pdev, 0)) {
+ phba->pci_bar0_map = pci_resource_start(pdev, 0);
+ bar0map_len = pci_resource_len(pdev, 0);
+ } else {
+ phba->pci_bar0_map = pci_resource_start(pdev, 1);
+ bar0map_len = pci_resource_len(pdev, 1);
+ }
+ phba->pci_bar1_map = pci_resource_start(pdev, 2);
+ bar1map_len = pci_resource_len(pdev, 2);
- phba->pci_bar1_map = pci_resource_start(pdev, LPFC_SLI4_BAR1);
- bar1map_len = pci_resource_len(pdev, LPFC_SLI4_BAR1);
-
- phba->pci_bar2_map = pci_resource_start(pdev, LPFC_SLI4_BAR2);
- bar2map_len = pci_resource_len(pdev, LPFC_SLI4_BAR2);
+ phba->pci_bar2_map = pci_resource_start(pdev, 4);
+ bar2map_len = pci_resource_len(pdev, 4);
/* Map SLI4 PCI Config Space Register base to a kernel virtual addr */
phba->sli4_hba.conf_regs_memmap_p =
@@ -6793,6 +7121,73 @@
phba->pport->work_port_events = 0;
}
+ /**
+ * lpfc_pc_sli4_params_get - Get the SLI4_PARAMS port capabilities.
+ * @phba: Pointer to HBA context object.
+ * @mboxq: Pointer to the mailboxq memory for the mailbox command response.
+ *
+ * This function is called in the SLI4 code path to read the port's
+ * sli4 capabilities.
+ *
+ * This function may be be called from any context that can block-wait
+ * for the completion. The expectation is that this routine is called
+ * typically from probe_one or from the online routine.
+ **/
+int
+lpfc_pc_sli4_params_get(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
+{
+ int rc;
+ struct lpfc_mqe *mqe;
+ struct lpfc_pc_sli4_params *sli4_params;
+ uint32_t mbox_tmo;
+
+ rc = 0;
+ mqe = &mboxq->u.mqe;
+
+ /* Read the port's SLI4 Parameters port capabilities */
+ lpfc_sli4_params(mboxq);
+ if (!phba->sli4_hba.intr_enable)
+ rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+ else {
+ mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_PORT_CAPABILITIES);
+ rc = lpfc_sli_issue_mbox_wait(phba, mboxq, mbox_tmo);
+ }
+
+ if (unlikely(rc))
+ return 1;
+
+ sli4_params = &phba->sli4_hba.pc_sli4_params;
+ sli4_params->if_type = bf_get(if_type, &mqe->un.sli4_params);
+ sli4_params->sli_rev = bf_get(sli_rev, &mqe->un.sli4_params);
+ sli4_params->sli_family = bf_get(sli_family, &mqe->un.sli4_params);
+ sli4_params->featurelevel_1 = bf_get(featurelevel_1,
+ &mqe->un.sli4_params);
+ sli4_params->featurelevel_2 = bf_get(featurelevel_2,
+ &mqe->un.sli4_params);
+ sli4_params->proto_types = mqe->un.sli4_params.word3;
+ sli4_params->sge_supp_len = mqe->un.sli4_params.sge_supp_len;
+ sli4_params->if_page_sz = bf_get(if_page_sz, &mqe->un.sli4_params);
+ sli4_params->rq_db_window = bf_get(rq_db_window, &mqe->un.sli4_params);
+ sli4_params->loopbk_scope = bf_get(loopbk_scope, &mqe->un.sli4_params);
+ sli4_params->eq_pages_max = bf_get(eq_pages, &mqe->un.sli4_params);
+ sli4_params->eqe_size = bf_get(eqe_size, &mqe->un.sli4_params);
+ sli4_params->cq_pages_max = bf_get(cq_pages, &mqe->un.sli4_params);
+ sli4_params->cqe_size = bf_get(cqe_size, &mqe->un.sli4_params);
+ sli4_params->mq_pages_max = bf_get(mq_pages, &mqe->un.sli4_params);
+ sli4_params->mqe_size = bf_get(mqe_size, &mqe->un.sli4_params);
+ sli4_params->mq_elem_cnt = bf_get(mq_elem_cnt, &mqe->un.sli4_params);
+ sli4_params->wq_pages_max = bf_get(wq_pages, &mqe->un.sli4_params);
+ sli4_params->wqe_size = bf_get(wqe_size, &mqe->un.sli4_params);
+ sli4_params->rq_pages_max = bf_get(rq_pages, &mqe->un.sli4_params);
+ sli4_params->rqe_size = bf_get(rqe_size, &mqe->un.sli4_params);
+ sli4_params->hdr_pages_max = bf_get(hdr_pages, &mqe->un.sli4_params);
+ sli4_params->hdr_size = bf_get(hdr_size, &mqe->un.sli4_params);
+ sli4_params->hdr_pp_align = bf_get(hdr_pp_align, &mqe->un.sli4_params);
+ sli4_params->sgl_pages_max = bf_get(sgl_pages, &mqe->un.sli4_params);
+ sli4_params->sgl_pp_align = bf_get(sgl_pp_align, &mqe->un.sli4_params);
+ return rc;
+}
+
/**
* lpfc_pci_probe_one_s3 - PCI probe func to reg SLI-3 device to PCI subsystem.
* @pdev: pointer to PCI device
@@ -7134,6 +7529,12 @@
pci_set_power_state(pdev, PCI_D0);
pci_restore_state(pdev);
+ /*
+ * As the new kernel behavior of pci_restore_state() API call clears
+ * device saved_state flag, need to save the restored state again.
+ */
+ pci_save_state(pdev);
+
if (pdev->is_busmaster)
pci_set_master(pdev);
@@ -7317,6 +7718,13 @@
}
pci_restore_state(pdev);
+
+ /*
+ * As the new kernel behavior of pci_restore_state() API call clears
+ * device saved_state flag, need to save the restored state again.
+ */
+ pci_save_state(pdev);
+
if (pdev->is_busmaster)
pci_set_master(pdev);
@@ -7726,6 +8134,13 @@
/* Restore device state from PCI config space */
pci_set_power_state(pdev, PCI_D0);
pci_restore_state(pdev);
+
+ /*
+ * As the new kernel behavior of pci_restore_state() API call clears
+ * device saved_state flag, need to save the restored state again.
+ */
+ pci_save_state(pdev);
+
if (pdev->is_busmaster)
pci_set_master(pdev);
@@ -7845,11 +8260,11 @@
int rc;
struct lpfc_sli_intf intf;
- if (pci_read_config_dword(pdev, LPFC_SLIREV_CONF_WORD, &intf.word0))
+ if (pci_read_config_dword(pdev, LPFC_SLI_INTF, &intf.word0))
return -ENODEV;
if ((bf_get(lpfc_sli_intf_valid, &intf) == LPFC_SLI_INTF_VALID) &&
- (bf_get(lpfc_sli_intf_rev, &intf) == LPFC_SLIREV_CONF_SLI4))
+ (bf_get(lpfc_sli_intf_slirev, &intf) == LPFC_SLI_INTF_REV_SLI4))
rc = lpfc_pci_probe_one_s4(pdev, pid);
else
rc = lpfc_pci_probe_one_s3(pdev, pid);
diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c
index a9afd8b..6c4dce1 100644
--- a/drivers/scsi/lpfc/lpfc_mbox.c
+++ b/drivers/scsi/lpfc/lpfc_mbox.c
@@ -1707,7 +1707,8 @@
alloc_len - sizeof(union lpfc_sli4_cfg_shdr);
}
/* The sub-header is in DMA memory, which needs endian converstion */
- lpfc_sli_pcimem_bcopy(cfg_shdr, cfg_shdr,
+ if (cfg_shdr)
+ lpfc_sli_pcimem_bcopy(cfg_shdr, cfg_shdr,
sizeof(union lpfc_sli4_cfg_shdr));
return alloc_len;
@@ -1747,6 +1748,65 @@
}
/**
+ * lpfc_sli4_mbx_read_fcf_record - Allocate and construct read fcf mbox cmd
+ * @phba: pointer to lpfc hba data structure.
+ * @fcf_index: index to fcf table.
+ *
+ * This routine routine allocates and constructs non-embedded mailbox command
+ * for reading a FCF table entry refered by @fcf_index.
+ *
+ * Return: pointer to the mailbox command constructed if successful, otherwise
+ * NULL.
+ **/
+int
+lpfc_sli4_mbx_read_fcf_record(struct lpfc_hba *phba,
+ struct lpfcMboxq *mboxq,
+ uint16_t fcf_index)
+{
+ void *virt_addr;
+ dma_addr_t phys_addr;
+ uint8_t *bytep;
+ struct lpfc_mbx_sge sge;
+ uint32_t alloc_len, req_len;
+ struct lpfc_mbx_read_fcf_tbl *read_fcf;
+
+ if (!mboxq)
+ return -ENOMEM;
+
+ req_len = sizeof(struct fcf_record) +
+ sizeof(union lpfc_sli4_cfg_shdr) + 2 * sizeof(uint32_t);
+
+ /* Set up READ_FCF SLI4_CONFIG mailbox-ioctl command */
+ alloc_len = lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_FCOE,
+ LPFC_MBOX_OPCODE_FCOE_READ_FCF_TABLE, req_len,
+ LPFC_SLI4_MBX_NEMBED);
+
+ if (alloc_len < req_len) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX,
+ "0291 Allocated DMA memory size (x%x) is "
+ "less than the requested DMA memory "
+ "size (x%x)\n", alloc_len, req_len);
+ return -ENOMEM;
+ }
+
+ /* Get the first SGE entry from the non-embedded DMA memory. This
+ * routine only uses a single SGE.
+ */
+ lpfc_sli4_mbx_sge_get(mboxq, 0, &sge);
+ phys_addr = getPaddr(sge.pa_hi, sge.pa_lo);
+ virt_addr = mboxq->sge_array->addr[0];
+ read_fcf = (struct lpfc_mbx_read_fcf_tbl *)virt_addr;
+
+ /* Set up command fields */
+ bf_set(lpfc_mbx_read_fcf_tbl_indx, &read_fcf->u.request, fcf_index);
+ /* Perform necessary endian conversion */
+ bytep = virt_addr + sizeof(union lpfc_sli4_cfg_shdr);
+ lpfc_sli_pcimem_bcopy(bytep, bytep, sizeof(uint32_t));
+
+ return 0;
+}
+
+/**
* lpfc_request_features: Configure SLI4 REQUEST_FEATURES mailbox
* @mboxq: pointer to lpfc mbox command.
*
@@ -1946,13 +2006,14 @@
bf_set(lpfc_reg_fcfi_rq_id1, reg_fcfi, REG_FCF_INVALID_QID);
bf_set(lpfc_reg_fcfi_rq_id2, reg_fcfi, REG_FCF_INVALID_QID);
bf_set(lpfc_reg_fcfi_rq_id3, reg_fcfi, REG_FCF_INVALID_QID);
- bf_set(lpfc_reg_fcfi_info_index, reg_fcfi, phba->fcf.fcf_indx);
+ bf_set(lpfc_reg_fcfi_info_index, reg_fcfi,
+ phba->fcf.current_rec.fcf_indx);
/* reg_fcf addr mode is bit wise inverted value of fcf addr_mode */
- bf_set(lpfc_reg_fcfi_mam, reg_fcfi,
- (~phba->fcf.addr_mode) & 0x3);
- if (phba->fcf.fcf_flag & FCF_VALID_VLAN) {
+ bf_set(lpfc_reg_fcfi_mam, reg_fcfi, (~phba->fcf.addr_mode) & 0x3);
+ if (phba->fcf.current_rec.vlan_id != 0xFFFF) {
bf_set(lpfc_reg_fcfi_vv, reg_fcfi, 1);
- bf_set(lpfc_reg_fcfi_vlan_tag, reg_fcfi, phba->fcf.vlan_id);
+ bf_set(lpfc_reg_fcfi_vlan_tag, reg_fcfi,
+ phba->fcf.current_rec.vlan_id);
}
}
@@ -1992,3 +2053,41 @@
bf_set(lpfc_resume_rpi_ii, resume_rpi, RESUME_INDEX_RPI);
resume_rpi->event_tag = ndlp->phba->fc_eventTag;
}
+
+/**
+ * lpfc_supported_pages - Initialize the PORT_CAPABILITIES supported pages
+ * mailbox command.
+ * @mbox: pointer to lpfc mbox command to initialize.
+ *
+ * The PORT_CAPABILITIES supported pages mailbox command is issued to
+ * retrieve the particular feature pages supported by the port.
+ **/
+void
+lpfc_supported_pages(struct lpfcMboxq *mbox)
+{
+ struct lpfc_mbx_supp_pages *supp_pages;
+
+ memset(mbox, 0, sizeof(*mbox));
+ supp_pages = &mbox->u.mqe.un.supp_pages;
+ bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_PORT_CAPABILITIES);
+ bf_set(cpn, supp_pages, LPFC_SUPP_PAGES);
+}
+
+/**
+ * lpfc_sli4_params - Initialize the PORT_CAPABILITIES SLI4 Params
+ * mailbox command.
+ * @mbox: pointer to lpfc mbox command to initialize.
+ *
+ * The PORT_CAPABILITIES SLI4 parameters mailbox command is issued to
+ * retrieve the particular SLI4 features supported by the port.
+ **/
+void
+lpfc_sli4_params(struct lpfcMboxq *mbox)
+{
+ struct lpfc_mbx_sli4_params *sli4_params;
+
+ memset(mbox, 0, sizeof(*mbox));
+ sli4_params = &mbox->u.mqe.un.sli4_params;
+ bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_PORT_CAPABILITIES);
+ bf_set(cpn, sli4_params, LPFC_SLI4_PARAMETERS);
+}
diff --git a/drivers/scsi/lpfc/lpfc_nl.h b/drivers/scsi/lpfc/lpfc_nl.h
index d655ed3..f3cfbe2 100644
--- a/drivers/scsi/lpfc/lpfc_nl.h
+++ b/drivers/scsi/lpfc/lpfc_nl.h
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2008 Emulex. All rights reserved. *
+ * Copyright (C) 2010 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* *
@@ -177,23 +177,3 @@
uint32_t data;
};
-/* bsg definitions */
-#define LPFC_BSG_VENDOR_SET_CT_EVENT 1
-#define LPFC_BSG_VENDOR_GET_CT_EVENT 2
-
-struct set_ct_event {
- uint32_t command;
- uint32_t ev_req_id;
- uint32_t ev_reg_id;
-};
-
-struct get_ct_event {
- uint32_t command;
- uint32_t ev_reg_id;
- uint32_t ev_req_id;
-};
-
-struct get_ct_event_reply {
- uint32_t immed_data;
- uint32_t type;
-};
diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c
index 2ed6af1..d20ae6b 100644
--- a/drivers/scsi/lpfc/lpfc_nportdisc.c
+++ b/drivers/scsi/lpfc/lpfc_nportdisc.c
@@ -62,7 +62,7 @@
int
lpfc_check_sparm(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
- struct serv_parm * sp, uint32_t class)
+ struct serv_parm *sp, uint32_t class, int flogi)
{
volatile struct serv_parm *hsp = &vport->fc_sparam;
uint16_t hsp_value, ssp_value = 0;
@@ -75,49 +75,56 @@
* correcting the byte values.
*/
if (sp->cls1.classValid) {
- hsp_value = (hsp->cls1.rcvDataSizeMsb << 8) |
- hsp->cls1.rcvDataSizeLsb;
- ssp_value = (sp->cls1.rcvDataSizeMsb << 8) |
- sp->cls1.rcvDataSizeLsb;
- if (!ssp_value)
- goto bad_service_param;
- if (ssp_value > hsp_value) {
- sp->cls1.rcvDataSizeLsb = hsp->cls1.rcvDataSizeLsb;
- sp->cls1.rcvDataSizeMsb = hsp->cls1.rcvDataSizeMsb;
+ if (!flogi) {
+ hsp_value = ((hsp->cls1.rcvDataSizeMsb << 8) |
+ hsp->cls1.rcvDataSizeLsb);
+ ssp_value = ((sp->cls1.rcvDataSizeMsb << 8) |
+ sp->cls1.rcvDataSizeLsb);
+ if (!ssp_value)
+ goto bad_service_param;
+ if (ssp_value > hsp_value) {
+ sp->cls1.rcvDataSizeLsb =
+ hsp->cls1.rcvDataSizeLsb;
+ sp->cls1.rcvDataSizeMsb =
+ hsp->cls1.rcvDataSizeMsb;
+ }
}
- } else if (class == CLASS1) {
+ } else if (class == CLASS1)
goto bad_service_param;
- }
-
if (sp->cls2.classValid) {
- hsp_value = (hsp->cls2.rcvDataSizeMsb << 8) |
- hsp->cls2.rcvDataSizeLsb;
- ssp_value = (sp->cls2.rcvDataSizeMsb << 8) |
- sp->cls2.rcvDataSizeLsb;
- if (!ssp_value)
- goto bad_service_param;
- if (ssp_value > hsp_value) {
- sp->cls2.rcvDataSizeLsb = hsp->cls2.rcvDataSizeLsb;
- sp->cls2.rcvDataSizeMsb = hsp->cls2.rcvDataSizeMsb;
+ if (!flogi) {
+ hsp_value = ((hsp->cls2.rcvDataSizeMsb << 8) |
+ hsp->cls2.rcvDataSizeLsb);
+ ssp_value = ((sp->cls2.rcvDataSizeMsb << 8) |
+ sp->cls2.rcvDataSizeLsb);
+ if (!ssp_value)
+ goto bad_service_param;
+ if (ssp_value > hsp_value) {
+ sp->cls2.rcvDataSizeLsb =
+ hsp->cls2.rcvDataSizeLsb;
+ sp->cls2.rcvDataSizeMsb =
+ hsp->cls2.rcvDataSizeMsb;
+ }
}
- } else if (class == CLASS2) {
+ } else if (class == CLASS2)
goto bad_service_param;
- }
-
if (sp->cls3.classValid) {
- hsp_value = (hsp->cls3.rcvDataSizeMsb << 8) |
- hsp->cls3.rcvDataSizeLsb;
- ssp_value = (sp->cls3.rcvDataSizeMsb << 8) |
- sp->cls3.rcvDataSizeLsb;
- if (!ssp_value)
- goto bad_service_param;
- if (ssp_value > hsp_value) {
- sp->cls3.rcvDataSizeLsb = hsp->cls3.rcvDataSizeLsb;
- sp->cls3.rcvDataSizeMsb = hsp->cls3.rcvDataSizeMsb;
+ if (!flogi) {
+ hsp_value = ((hsp->cls3.rcvDataSizeMsb << 8) |
+ hsp->cls3.rcvDataSizeLsb);
+ ssp_value = ((sp->cls3.rcvDataSizeMsb << 8) |
+ sp->cls3.rcvDataSizeLsb);
+ if (!ssp_value)
+ goto bad_service_param;
+ if (ssp_value > hsp_value) {
+ sp->cls3.rcvDataSizeLsb =
+ hsp->cls3.rcvDataSizeLsb;
+ sp->cls3.rcvDataSizeMsb =
+ hsp->cls3.rcvDataSizeMsb;
+ }
}
- } else if (class == CLASS3) {
+ } else if (class == CLASS3)
goto bad_service_param;
- }
/*
* Preserve the upper four bits of the MSB from the PLOGI response.
@@ -247,7 +254,7 @@
int rc;
memset(&stat, 0, sizeof (struct ls_rjt));
- if (vport->port_state <= LPFC_FLOGI) {
+ if (vport->port_state <= LPFC_FDISC) {
/* Before responding to PLOGI, check for pt2pt mode.
* If we are pt2pt, with an outstanding FLOGI, abort
* the FLOGI and resend it first.
@@ -295,7 +302,7 @@
NULL);
return 0;
}
- if ((lpfc_check_sparm(vport, ndlp, sp, CLASS3) == 0)) {
+ if ((lpfc_check_sparm(vport, ndlp, sp, CLASS3, 0) == 0)) {
/* Reject this request because invalid parameters */
stat.un.b.lsRjtRsnCode = LSRJT_UNABLE_TPC;
stat.un.b.lsRjtRsnCodeExp = LSEXP_SPARM_OPTIONS;
@@ -831,7 +838,7 @@
"0142 PLOGI RSP: Invalid WWN.\n");
goto out;
}
- if (!lpfc_check_sparm(vport, ndlp, sp, CLASS3))
+ if (!lpfc_check_sparm(vport, ndlp, sp, CLASS3, 0))
goto out;
/* PLOGI chkparm OK */
lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS,
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index a246410..7f21b47 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -626,6 +626,7 @@
&phba->sli4_hba.lpfc_abts_scsi_buf_list, list) {
if (psb->cur_iocbq.sli4_xritag == xri) {
list_del(&psb->list);
+ psb->exch_busy = 0;
psb->status = IOSTAT_SUCCESS;
spin_unlock_irqrestore(
&phba->sli4_hba.abts_scsi_buf_list_lock,
@@ -688,11 +689,12 @@
list);
if (status) {
/* Put this back on the abort scsi list */
- psb->status = IOSTAT_LOCAL_REJECT;
- psb->result = IOERR_ABORT_REQUESTED;
+ psb->exch_busy = 1;
rc++;
- } else
+ } else {
+ psb->exch_busy = 0;
psb->status = IOSTAT_SUCCESS;
+ }
/* Put it back into the SCSI buffer list */
lpfc_release_scsi_buf_s4(phba, psb);
}
@@ -796,19 +798,17 @@
*/
sgl->addr_hi = cpu_to_le32(putPaddrHigh(pdma_phys_fcp_cmd));
sgl->addr_lo = cpu_to_le32(putPaddrLow(pdma_phys_fcp_cmd));
- bf_set(lpfc_sli4_sge_len, sgl, sizeof(struct fcp_cmnd));
bf_set(lpfc_sli4_sge_last, sgl, 0);
sgl->word2 = cpu_to_le32(sgl->word2);
- sgl->word3 = cpu_to_le32(sgl->word3);
+ sgl->sge_len = cpu_to_le32(sizeof(struct fcp_cmnd));
sgl++;
/* Setup the physical region for the FCP RSP */
sgl->addr_hi = cpu_to_le32(putPaddrHigh(pdma_phys_fcp_rsp));
sgl->addr_lo = cpu_to_le32(putPaddrLow(pdma_phys_fcp_rsp));
- bf_set(lpfc_sli4_sge_len, sgl, sizeof(struct fcp_rsp));
bf_set(lpfc_sli4_sge_last, sgl, 1);
sgl->word2 = cpu_to_le32(sgl->word2);
- sgl->word3 = cpu_to_le32(sgl->word3);
+ sgl->sge_len = cpu_to_le32(sizeof(struct fcp_rsp));
/*
* Since the IOCB for the FCP I/O is built into this
@@ -839,11 +839,12 @@
psb->cur_iocbq.sli4_xritag);
if (status) {
/* Put this back on the abort scsi list */
- psb->status = IOSTAT_LOCAL_REJECT;
- psb->result = IOERR_ABORT_REQUESTED;
+ psb->exch_busy = 1;
rc++;
- } else
+ } else {
+ psb->exch_busy = 0;
psb->status = IOSTAT_SUCCESS;
+ }
/* Put it back into the SCSI buffer list */
lpfc_release_scsi_buf_s4(phba, psb);
break;
@@ -857,11 +858,12 @@
list);
if (status) {
/* Put this back on the abort scsi list */
- psb->status = IOSTAT_LOCAL_REJECT;
- psb->result = IOERR_ABORT_REQUESTED;
+ psb->exch_busy = 1;
rc++;
- } else
+ } else {
+ psb->exch_busy = 0;
psb->status = IOSTAT_SUCCESS;
+ }
/* Put it back into the SCSI buffer list */
lpfc_release_scsi_buf_s4(phba, psb);
}
@@ -951,8 +953,7 @@
{
unsigned long iflag = 0;
- if (psb->status == IOSTAT_LOCAL_REJECT
- && psb->result == IOERR_ABORT_REQUESTED) {
+ if (psb->exch_busy) {
spin_lock_irqsave(&phba->sli4_hba.abts_scsi_buf_list_lock,
iflag);
psb->pCmd = NULL;
@@ -1869,7 +1870,6 @@
scsi_for_each_sg(scsi_cmnd, sgel, nseg, num_bde) {
physaddr = sg_dma_address(sgel);
dma_len = sg_dma_len(sgel);
- bf_set(lpfc_sli4_sge_len, sgl, sg_dma_len(sgel));
sgl->addr_lo = cpu_to_le32(putPaddrLow(physaddr));
sgl->addr_hi = cpu_to_le32(putPaddrHigh(physaddr));
if ((num_bde + 1) == nseg)
@@ -1878,7 +1878,7 @@
bf_set(lpfc_sli4_sge_last, sgl, 0);
bf_set(lpfc_sli4_sge_offset, sgl, dma_offset);
sgl->word2 = cpu_to_le32(sgl->word2);
- sgl->word3 = cpu_to_le32(sgl->word3);
+ sgl->sge_len = cpu_to_le32(dma_len);
dma_offset += dma_len;
sgl++;
}
@@ -2221,6 +2221,9 @@
lpfc_cmd->result = pIocbOut->iocb.un.ulpWord[4];
lpfc_cmd->status = pIocbOut->iocb.ulpStatus;
+ /* pick up SLI4 exhange busy status from HBA */
+ lpfc_cmd->exch_busy = pIocbOut->iocb_flag & LPFC_EXCHANGE_BUSY;
+
if (pnode && NLP_CHK_NODE_ACT(pnode))
atomic_dec(&pnode->cmd_pending);
@@ -2637,6 +2640,7 @@
}
phba->lpfc_get_scsi_buf = lpfc_get_scsi_buf;
phba->lpfc_rampdown_queue_depth = lpfc_rampdown_queue_depth;
+ phba->lpfc_scsi_cmd_iocb_cmpl = lpfc_scsi_cmd_iocb_cmpl;
return 0;
}
@@ -2695,6 +2699,13 @@
" port %s",
phba->Port);
}
+ len = strlen(lpfcinfobuf);
+ if (phba->sli4_hba.link_state.logical_speed) {
+ snprintf(lpfcinfobuf + len,
+ 384-len,
+ " Logical Link Speed: %d Mbps",
+ phba->sli4_hba.link_state.logical_speed * 10);
+ }
}
return lpfcinfobuf;
}
@@ -2990,6 +3001,7 @@
/* ABTS WQE must go to the same WQ as the WQE to be aborted */
abtsiocb->fcp_wqidx = iocb->fcp_wqidx;
+ abtsiocb->iocb_flag |= LPFC_USE_FCPWQIDX;
if (lpfc_is_link_up(phba))
icmd->ulpCommand = CMD_ABORT_XRI_CN;
diff --git a/drivers/scsi/lpfc/lpfc_scsi.h b/drivers/scsi/lpfc/lpfc_scsi.h
index 65dfc8b..5932273 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.h
+++ b/drivers/scsi/lpfc/lpfc_scsi.h
@@ -118,6 +118,7 @@
uint32_t timeout;
+ uint16_t exch_busy; /* SLI4 hba reported XB on complete WCQE */
uint16_t status; /* From IOCB Word 7- ulpStatus */
uint32_t result; /* From IOCB Word 4. */
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 589549b..35e3b96 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -580,10 +580,7 @@
else
sglq = __lpfc_clear_active_sglq(phba, iocbq->sli4_xritag);
if (sglq) {
- if (iocbq->iocb_flag & LPFC_DRIVER_ABORTED
- && ((iocbq->iocb.ulpStatus == IOSTAT_LOCAL_REJECT)
- && (iocbq->iocb.un.ulpWord[4]
- == IOERR_ABORT_REQUESTED))) {
+ if (iocbq->iocb_flag & LPFC_EXCHANGE_BUSY) {
spin_lock_irqsave(&phba->sli4_hba.abts_sgl_list_lock,
iflag);
list_add(&sglq->list,
@@ -764,10 +761,6 @@
case DSSCMD_IWRITE64_CX:
case DSSCMD_IREAD64_CR:
case DSSCMD_IREAD64_CX:
- case DSSCMD_INVALIDATE_DEK:
- case DSSCMD_SET_KEK:
- case DSSCMD_GET_KEK_ID:
- case DSSCMD_GEN_XFER:
type = LPFC_SOL_IOCB;
break;
case CMD_ABORT_XRI_CN:
@@ -1717,6 +1710,7 @@
struct lpfc_dmabuf *mp;
uint16_t rpi, vpi;
int rc;
+ struct lpfc_vport *vport = pmb->vport;
mp = (struct lpfc_dmabuf *) (pmb->context1);
@@ -1745,6 +1739,18 @@
return;
}
+ /* Unreg VPI, if the REG_VPI succeed after VLink failure */
+ if ((pmb->u.mb.mbxCommand == MBX_REG_VPI) &&
+ !(phba->pport->load_flag & FC_UNLOADING) &&
+ !pmb->u.mb.mbxStatus) {
+ lpfc_unreg_vpi(phba, pmb->u.mb.un.varRegVpi.vpi, pmb);
+ pmb->vport = vport;
+ pmb->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
+ rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
+ if (rc != MBX_NOT_FINISHED)
+ return;
+ }
+
if (bf_get(lpfc_mqe_command, &pmb->u.mqe) == MBX_SLI4_CONFIG)
lpfc_sli4_mbox_cmd_free(phba, pmb);
else
@@ -2228,9 +2234,15 @@
* All other are passed to the completion callback.
*/
if (pring->ringno == LPFC_ELS_RING) {
- if (cmdiocbp->iocb_flag & LPFC_DRIVER_ABORTED) {
+ if ((phba->sli_rev < LPFC_SLI_REV4) &&
+ (cmdiocbp->iocb_flag &
+ LPFC_DRIVER_ABORTED)) {
+ spin_lock_irqsave(&phba->hbalock,
+ iflag);
cmdiocbp->iocb_flag &=
~LPFC_DRIVER_ABORTED;
+ spin_unlock_irqrestore(&phba->hbalock,
+ iflag);
saveq->iocb.ulpStatus =
IOSTAT_LOCAL_REJECT;
saveq->iocb.un.ulpWord[4] =
@@ -2240,7 +2252,47 @@
* of DMAing payload, so don't free data
* buffer till after a hbeat.
*/
+ spin_lock_irqsave(&phba->hbalock,
+ iflag);
saveq->iocb_flag |= LPFC_DELAY_MEM_FREE;
+ spin_unlock_irqrestore(&phba->hbalock,
+ iflag);
+ }
+ if ((phba->sli_rev == LPFC_SLI_REV4) &&
+ (saveq->iocb_flag & LPFC_EXCHANGE_BUSY)) {
+ /* Set cmdiocb flag for the exchange
+ * busy so sgl (xri) will not be
+ * released until the abort xri is
+ * received from hba, clear the
+ * LPFC_DRIVER_ABORTED bit in case
+ * it was driver initiated abort.
+ */
+ spin_lock_irqsave(&phba->hbalock,
+ iflag);
+ cmdiocbp->iocb_flag &=
+ ~LPFC_DRIVER_ABORTED;
+ cmdiocbp->iocb_flag |=
+ LPFC_EXCHANGE_BUSY;
+ spin_unlock_irqrestore(&phba->hbalock,
+ iflag);
+ cmdiocbp->iocb.ulpStatus =
+ IOSTAT_LOCAL_REJECT;
+ cmdiocbp->iocb.un.ulpWord[4] =
+ IOERR_ABORT_REQUESTED;
+ /*
+ * For SLI4, irsiocb contains NO_XRI
+ * in sli_xritag, it shall not affect
+ * releasing sgl (xri) process.
+ */
+ saveq->iocb.ulpStatus =
+ IOSTAT_LOCAL_REJECT;
+ saveq->iocb.un.ulpWord[4] =
+ IOERR_SLI_ABORTED;
+ spin_lock_irqsave(&phba->hbalock,
+ iflag);
+ saveq->iocb_flag |= LPFC_DELAY_MEM_FREE;
+ spin_unlock_irqrestore(&phba->hbalock,
+ iflag);
}
}
(cmdiocbp->iocb_cmpl) (phba, cmdiocbp, saveq);
@@ -5687,19 +5739,19 @@
for (i = 0; i < numBdes; i++) {
/* Should already be byte swapped. */
- sgl->addr_hi = bpl->addrHigh;
- sgl->addr_lo = bpl->addrLow;
- /* swap the size field back to the cpu so we
- * can assign it to the sgl.
- */
- bde.tus.w = le32_to_cpu(bpl->tus.w);
- bf_set(lpfc_sli4_sge_len, sgl, bde.tus.f.bdeSize);
+ sgl->addr_hi = bpl->addrHigh;
+ sgl->addr_lo = bpl->addrLow;
+
if ((i+1) == numBdes)
bf_set(lpfc_sli4_sge_last, sgl, 1);
else
bf_set(lpfc_sli4_sge_last, sgl, 0);
sgl->word2 = cpu_to_le32(sgl->word2);
- sgl->word3 = cpu_to_le32(sgl->word3);
+ /* swap the size field back to the cpu so we
+ * can assign it to the sgl.
+ */
+ bde.tus.w = le32_to_cpu(bpl->tus.w);
+ sgl->sge_len = cpu_to_le32(bde.tus.f.bdeSize);
bpl++;
sgl++;
}
@@ -5712,11 +5764,10 @@
cpu_to_le32(icmd->un.genreq64.bdl.addrHigh);
sgl->addr_lo =
cpu_to_le32(icmd->un.genreq64.bdl.addrLow);
- bf_set(lpfc_sli4_sge_len, sgl,
- icmd->un.genreq64.bdl.bdeSize);
bf_set(lpfc_sli4_sge_last, sgl, 1);
sgl->word2 = cpu_to_le32(sgl->word2);
- sgl->word3 = cpu_to_le32(sgl->word3);
+ sgl->sge_len =
+ cpu_to_le32(icmd->un.genreq64.bdl.bdeSize);
}
return sglq->sli4_xritag;
}
@@ -5987,12 +6038,10 @@
else
bf_set(abort_cmd_ia, &wqe->abort_cmd, 0);
bf_set(abort_cmd_criteria, &wqe->abort_cmd, T_XRI_TAG);
- abort_tag = iocbq->iocb.un.acxri.abortIoTag;
wqe->words[5] = 0;
bf_set(lpfc_wqe_gen_ct, &wqe->generic,
((iocbq->iocb.ulpCt_h << 1) | iocbq->iocb.ulpCt_l));
abort_tag = iocbq->iocb.un.acxri.abortIoTag;
- wqe->generic.abort_tag = abort_tag;
/*
* The abort handler will send us CMD_ABORT_XRI_CN or
* CMD_CLOSE_XRI_CN and the fw only accepts CMD_ABORT_XRI_CX
@@ -6121,15 +6170,15 @@
if (lpfc_sli4_iocb2wqe(phba, piocb, &wqe))
return IOCB_ERROR;
- if (piocb->iocb_flag & LPFC_IO_FCP) {
+ if ((piocb->iocb_flag & LPFC_IO_FCP) ||
+ (piocb->iocb_flag & LPFC_USE_FCPWQIDX)) {
/*
* For FCP command IOCB, get a new WQ index to distribute
* WQE across the WQsr. On the other hand, for abort IOCB,
* it carries the same WQ index to the original command
* IOCB.
*/
- if ((piocb->iocb.ulpCommand != CMD_ABORT_XRI_CN) &&
- (piocb->iocb.ulpCommand != CMD_CLOSE_XRI_CN))
+ if (piocb->iocb_flag & LPFC_IO_FCP)
piocb->fcp_wqidx = lpfc_sli4_scmd_to_wqidx_distr(phba);
if (lpfc_sli4_wq_put(phba->sli4_hba.fcp_wq[piocb->fcp_wqidx],
&wqe))
@@ -7004,7 +7053,14 @@
abort_iocb->iocb.ulpContext != abort_context ||
(abort_iocb->iocb_flag & LPFC_DRIVER_ABORTED) == 0)
spin_unlock_irq(&phba->hbalock);
- else {
+ else if (phba->sli_rev < LPFC_SLI_REV4) {
+ /*
+ * leave the SLI4 aborted command on the txcmplq
+ * list and the command complete WCQE's XB bit
+ * will tell whether the SGL (XRI) can be released
+ * immediately or to the aborted SGL list for the
+ * following abort XRI from the HBA.
+ */
list_del_init(&abort_iocb->list);
pring->txcmplq_cnt--;
spin_unlock_irq(&phba->hbalock);
@@ -7013,11 +7069,13 @@
* payload, so don't free data buffer till after
* a hbeat.
*/
+ spin_lock_irq(&phba->hbalock);
abort_iocb->iocb_flag |= LPFC_DELAY_MEM_FREE;
-
abort_iocb->iocb_flag &= ~LPFC_DRIVER_ABORTED;
+ spin_unlock_irq(&phba->hbalock);
+
abort_iocb->iocb.ulpStatus = IOSTAT_LOCAL_REJECT;
- abort_iocb->iocb.un.ulpWord[4] = IOERR_SLI_ABORTED;
+ abort_iocb->iocb.un.ulpWord[4] = IOERR_ABORT_REQUESTED;
(abort_iocb->iocb_cmpl)(phba, abort_iocb, abort_iocb);
}
}
@@ -7106,7 +7164,7 @@
return 0;
/* This signals the response to set the correct status
- * before calling the completion handler.
+ * before calling the completion handler
*/
cmdiocb->iocb_flag |= LPFC_DRIVER_ABORTED;
@@ -7124,6 +7182,8 @@
/* ABTS WQE must go to the same WQ as the WQE to be aborted */
abtsiocbp->fcp_wqidx = cmdiocb->fcp_wqidx;
+ if (cmdiocb->iocb_flag & LPFC_IO_FCP)
+ abtsiocbp->iocb_flag |= LPFC_USE_FCPWQIDX;
if (phba->link_state >= LPFC_LINK_UP)
iabt->ulpCommand = CMD_ABORT_XRI_CN;
@@ -7330,6 +7390,8 @@
/* ABTS WQE must go to the same WQ as the WQE to be aborted */
abtsiocb->fcp_wqidx = iocbq->fcp_wqidx;
+ if (iocbq->iocb_flag & LPFC_IO_FCP)
+ abtsiocb->iocb_flag |= LPFC_USE_FCPWQIDX;
if (lpfc_is_link_up(phba))
abtsiocb->iocb.ulpCommand = CMD_ABORT_XRI_CN;
@@ -8359,11 +8421,24 @@
}
}
+/**
+ * lpfc_sli4_iocb_param_transfer - Transfer pIocbOut and cmpl status to pIocbIn
+ * @phba: pointer to lpfc hba data structure
+ * @pIocbIn: pointer to the rspiocbq
+ * @pIocbOut: pointer to the cmdiocbq
+ * @wcqe: pointer to the complete wcqe
+ *
+ * This routine transfers the fields of a command iocbq to a response iocbq
+ * by copying all the IOCB fields from command iocbq and transferring the
+ * completion status information from the complete wcqe.
+ **/
static void
-lpfc_sli4_iocb_param_transfer(struct lpfc_iocbq *pIocbIn,
+lpfc_sli4_iocb_param_transfer(struct lpfc_hba *phba,
+ struct lpfc_iocbq *pIocbIn,
struct lpfc_iocbq *pIocbOut,
struct lpfc_wcqe_complete *wcqe)
{
+ unsigned long iflags;
size_t offset = offsetof(struct lpfc_iocbq, iocb);
memcpy((char *)pIocbIn + offset, (char *)pIocbOut + offset,
@@ -8377,8 +8452,17 @@
wcqe->total_data_placed;
else
pIocbIn->iocb.un.ulpWord[4] = wcqe->parameter;
- else
+ else {
pIocbIn->iocb.un.ulpWord[4] = wcqe->parameter;
+ pIocbIn->iocb.un.genreq64.bdl.bdeSize = wcqe->total_data_placed;
+ }
+
+ /* Pick up HBA exchange busy condition */
+ if (bf_get(lpfc_wcqe_c_xb, wcqe)) {
+ spin_lock_irqsave(&phba->hbalock, iflags);
+ pIocbIn->iocb_flag |= LPFC_EXCHANGE_BUSY;
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+ }
}
/**
@@ -8419,7 +8503,7 @@
}
/* Fake the irspiocbq and copy necessary response information */
- lpfc_sli4_iocb_param_transfer(irspiocbq, cmdiocbq, wcqe);
+ lpfc_sli4_iocb_param_transfer(phba, irspiocbq, cmdiocbq, wcqe);
return irspiocbq;
}
@@ -8849,8 +8933,7 @@
int ecount = 0;
uint16_t cqid;
- if (bf_get(lpfc_eqe_major_code, eqe) != 0 ||
- bf_get(lpfc_eqe_minor_code, eqe) != 0) {
+ if (bf_get(lpfc_eqe_major_code, eqe) != 0) {
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
"0359 Not a valid slow-path completion "
"event: majorcode=x%x, minorcode=x%x\n",
@@ -8976,7 +9059,7 @@
}
/* Fake the irspiocb and copy necessary response information */
- lpfc_sli4_iocb_param_transfer(&irspiocbq, cmdiocbq, wcqe);
+ lpfc_sli4_iocb_param_transfer(phba, &irspiocbq, cmdiocbq, wcqe);
/* Pass the cmd_iocb and the rsp state to the upper layer */
(cmdiocbq->iocb_cmpl)(phba, cmdiocbq, &irspiocbq);
@@ -9082,8 +9165,7 @@
uint16_t cqid;
int ecount = 0;
- if (unlikely(bf_get(lpfc_eqe_major_code, eqe) != 0) ||
- unlikely(bf_get(lpfc_eqe_minor_code, eqe) != 0)) {
+ if (unlikely(bf_get(lpfc_eqe_major_code, eqe) != 0)) {
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
"0366 Not a valid fast-path completion "
"event: majorcode=x%x, minorcode=x%x\n",
@@ -11871,12 +11953,6 @@
{
int rc = 0, error;
LPFC_MBOXQ_t *mboxq;
- void *virt_addr;
- dma_addr_t phys_addr;
- uint8_t *bytep;
- struct lpfc_mbx_sge sge;
- uint32_t alloc_len, req_len;
- struct lpfc_mbx_read_fcf_tbl *read_fcf;
phba->fcoe_eventtag_at_fcf_scan = phba->fcoe_eventtag;
mboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
@@ -11887,43 +11963,19 @@
error = -ENOMEM;
goto fail_fcfscan;
}
-
- req_len = sizeof(struct fcf_record) +
- sizeof(union lpfc_sli4_cfg_shdr) + 2 * sizeof(uint32_t);
-
- /* Set up READ_FCF SLI4_CONFIG mailbox-ioctl command */
- alloc_len = lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_FCOE,
- LPFC_MBOX_OPCODE_FCOE_READ_FCF_TABLE, req_len,
- LPFC_SLI4_MBX_NEMBED);
-
- if (alloc_len < req_len) {
- lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "0291 Allocated DMA memory size (x%x) is "
- "less than the requested DMA memory "
- "size (x%x)\n", alloc_len, req_len);
- error = -ENOMEM;
+ /* Construct the read FCF record mailbox command */
+ rc = lpfc_sli4_mbx_read_fcf_record(phba, mboxq, fcf_index);
+ if (rc) {
+ error = -EINVAL;
goto fail_fcfscan;
}
-
- /* Get the first SGE entry from the non-embedded DMA memory. This
- * routine only uses a single SGE.
- */
- lpfc_sli4_mbx_sge_get(mboxq, 0, &sge);
- phys_addr = getPaddr(sge.pa_hi, sge.pa_lo);
- virt_addr = mboxq->sge_array->addr[0];
- read_fcf = (struct lpfc_mbx_read_fcf_tbl *)virt_addr;
-
- /* Set up command fields */
- bf_set(lpfc_mbx_read_fcf_tbl_indx, &read_fcf->u.request, fcf_index);
- /* Perform necessary endian conversion */
- bytep = virt_addr + sizeof(union lpfc_sli4_cfg_shdr);
- lpfc_sli_pcimem_bcopy(bytep, bytep, sizeof(uint32_t));
+ /* Issue the mailbox command asynchronously */
mboxq->vport = phba->pport;
mboxq->mbox_cmpl = lpfc_mbx_cmpl_read_fcf_record;
rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_NOWAIT);
- if (rc == MBX_NOT_FINISHED) {
+ if (rc == MBX_NOT_FINISHED)
error = -EIO;
- } else {
+ else {
spin_lock_irq(&phba->hbalock);
phba->hba_flag |= FCF_DISC_INPROGRESS;
spin_unlock_irq(&phba->hbalock);
@@ -11942,6 +11994,90 @@
}
/**
+ * lpfc_mbx_cmpl_redisc_fcf_table - completion routine for rediscover FCF table
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is the completion routine for the rediscover FCF table mailbox
+ * command. If the mailbox command returned failure, it will try to stop the
+ * FCF rediscover wait timer.
+ **/
+void
+lpfc_mbx_cmpl_redisc_fcf_table(struct lpfc_hba *phba, LPFC_MBOXQ_t *mbox)
+{
+ struct lpfc_mbx_redisc_fcf_tbl *redisc_fcf;
+ uint32_t shdr_status, shdr_add_status;
+
+ redisc_fcf = &mbox->u.mqe.un.redisc_fcf_tbl;
+
+ shdr_status = bf_get(lpfc_mbox_hdr_status,
+ &redisc_fcf->header.cfg_shdr.response);
+ shdr_add_status = bf_get(lpfc_mbox_hdr_add_status,
+ &redisc_fcf->header.cfg_shdr.response);
+ if (shdr_status || shdr_add_status) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "2746 Requesting for FCF rediscovery failed "
+ "status x%x add_status x%x\n",
+ shdr_status, shdr_add_status);
+ /*
+ * Request failed, last resort to re-try current
+ * registered FCF entry
+ */
+ lpfc_retry_pport_discovery(phba);
+ } else
+ /*
+ * Start FCF rediscovery wait timer for pending FCF
+ * before rescan FCF record table.
+ */
+ lpfc_fcf_redisc_wait_start_timer(phba);
+
+ mempool_free(mbox, phba->mbox_mem_pool);
+}
+
+/**
+ * lpfc_sli4_redisc_all_fcf - Request to rediscover entire FCF table by port.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to request for rediscovery of the entire FCF table
+ * by the port.
+ **/
+int
+lpfc_sli4_redisc_fcf_table(struct lpfc_hba *phba)
+{
+ LPFC_MBOXQ_t *mbox;
+ struct lpfc_mbx_redisc_fcf_tbl *redisc_fcf;
+ int rc, length;
+
+ mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mbox) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "2745 Failed to allocate mbox for "
+ "requesting FCF rediscover.\n");
+ return -ENOMEM;
+ }
+
+ length = (sizeof(struct lpfc_mbx_redisc_fcf_tbl) -
+ sizeof(struct lpfc_sli4_cfg_mhdr));
+ lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE,
+ LPFC_MBOX_OPCODE_FCOE_REDISCOVER_FCF,
+ length, LPFC_SLI4_MBX_EMBED);
+
+ redisc_fcf = &mbox->u.mqe.un.redisc_fcf_tbl;
+ /* Set count to 0 for invalidating the entire FCF database */
+ bf_set(lpfc_mbx_redisc_fcf_count, redisc_fcf, 0);
+
+ /* Issue the mailbox command asynchronously */
+ mbox->vport = phba->pport;
+ mbox->mbox_cmpl = lpfc_mbx_cmpl_redisc_fcf_table;
+ rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT);
+
+ if (rc == MBX_NOT_FINISHED) {
+ mempool_free(mbox, phba->mbox_mem_pool);
+ return -EIO;
+ }
+ return 0;
+}
+
+/**
* lpfc_sli_read_link_ste - Read region 23 to decide if link is disabled.
* @phba: pointer to lpfc hba data structure.
*
@@ -12069,3 +12205,48 @@
kfree(rgn23_data);
return;
}
+
+/**
+ * lpfc_cleanup_pending_mbox - Free up vport discovery mailbox commands.
+ * @vport: pointer to vport data structure.
+ *
+ * This function iterate through the mailboxq and clean up all REG_LOGIN
+ * and REG_VPI mailbox commands associated with the vport. This function
+ * is called when driver want to restart discovery of the vport due to
+ * a Clear Virtual Link event.
+ **/
+void
+lpfc_cleanup_pending_mbox(struct lpfc_vport *vport)
+{
+ struct lpfc_hba *phba = vport->phba;
+ LPFC_MBOXQ_t *mb, *nextmb;
+ struct lpfc_dmabuf *mp;
+
+ spin_lock_irq(&phba->hbalock);
+ list_for_each_entry_safe(mb, nextmb, &phba->sli.mboxq, list) {
+ if (mb->vport != vport)
+ continue;
+
+ if ((mb->u.mb.mbxCommand != MBX_REG_LOGIN64) &&
+ (mb->u.mb.mbxCommand != MBX_REG_VPI))
+ continue;
+
+ if (mb->u.mb.mbxCommand == MBX_REG_LOGIN64) {
+ mp = (struct lpfc_dmabuf *) (mb->context1);
+ if (mp) {
+ __lpfc_mbuf_free(phba, mp->virt, mp->phys);
+ kfree(mp);
+ }
+ }
+ list_del(&mb->list);
+ mempool_free(mb, phba->mbox_mem_pool);
+ }
+ mb = phba->sli.mbox_active;
+ if (mb && (mb->vport == vport)) {
+ if ((mb->u.mb.mbxCommand == MBX_REG_LOGIN64) ||
+ (mb->u.mb.mbxCommand == MBX_REG_VPI))
+ mb->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
+ }
+ spin_unlock_irq(&phba->hbalock);
+}
+
diff --git a/drivers/scsi/lpfc/lpfc_sli.h b/drivers/scsi/lpfc/lpfc_sli.h
index ba38de3..dfcf543 100644
--- a/drivers/scsi/lpfc/lpfc_sli.h
+++ b/drivers/scsi/lpfc/lpfc_sli.h
@@ -53,17 +53,19 @@
IOCB_t iocb; /* IOCB cmd */
uint8_t retry; /* retry counter for IOCB cmd - if needed */
- uint8_t iocb_flag;
+ uint16_t iocb_flag;
#define LPFC_IO_LIBDFC 1 /* libdfc iocb */
#define LPFC_IO_WAKE 2 /* High Priority Queue signal flag */
#define LPFC_IO_FCP 4 /* FCP command -- iocbq in scsi_buf */
#define LPFC_DRIVER_ABORTED 8 /* driver aborted this request */
#define LPFC_IO_FABRIC 0x10 /* Iocb send using fabric scheduler */
#define LPFC_DELAY_MEM_FREE 0x20 /* Defer free'ing of FC data */
-#define LPFC_FIP_ELS_ID_MASK 0xc0 /* ELS_ID range 0-3 */
-#define LPFC_FIP_ELS_ID_SHIFT 6
+#define LPFC_EXCHANGE_BUSY 0x40 /* SLI4 hba reported XB in response */
+#define LPFC_USE_FCPWQIDX 0x80 /* Submit to specified FCPWQ index */
- uint8_t abort_count;
+#define LPFC_FIP_ELS_ID_MASK 0xc000 /* ELS_ID range 0-3, non-shifted mask */
+#define LPFC_FIP_ELS_ID_SHIFT 14
+
uint8_t rsvd2;
uint32_t drvrTimeout; /* driver timeout in seconds */
uint32_t fcp_wqidx; /* index to FCP work queue */
diff --git a/drivers/scsi/lpfc/lpfc_sli4.h b/drivers/scsi/lpfc/lpfc_sli4.h
index 44e5f57..86308836 100644
--- a/drivers/scsi/lpfc/lpfc_sli4.h
+++ b/drivers/scsi/lpfc/lpfc_sli4.h
@@ -22,6 +22,10 @@
#define LPFC_RELEASE_NOTIFICATION_INTERVAL 32
#define LPFC_GET_QE_REL_INT 32
#define LPFC_RPI_LOW_WATER_MARK 10
+
+/* Amount of time in seconds for waiting FCF rediscovery to complete */
+#define LPFC_FCF_REDISCOVER_WAIT_TMO 2000 /* msec */
+
/* Number of SGL entries can be posted in a 4KB nonembedded mbox command */
#define LPFC_NEMBED_MBOX_SGL_CNT 254
@@ -126,24 +130,36 @@
uint8_t status;
uint8_t physical;
uint8_t fault;
+ uint16_t logical_speed;
+};
+
+struct lpfc_fcf_rec {
+ uint8_t fabric_name[8];
+ uint8_t switch_name[8];
+ uint8_t mac_addr[6];
+ uint16_t fcf_indx;
+ uint32_t priority;
+ uint16_t vlan_id;
+ uint32_t addr_mode;
+ uint32_t flag;
+#define BOOT_ENABLE 0x01
+#define RECORD_VALID 0x02
};
struct lpfc_fcf {
- uint8_t fabric_name[8];
- uint8_t switch_name[8];
- uint8_t mac_addr[6];
- uint16_t fcf_indx;
uint16_t fcfi;
uint32_t fcf_flag;
#define FCF_AVAILABLE 0x01 /* FCF available for discovery */
#define FCF_REGISTERED 0x02 /* FCF registered with FW */
-#define FCF_DISCOVERED 0x04 /* FCF discovery started */
-#define FCF_BOOT_ENABLE 0x08 /* Boot bios use this FCF */
-#define FCF_IN_USE 0x10 /* Atleast one discovery completed */
-#define FCF_VALID_VLAN 0x20 /* Use the vlan id specified */
- uint32_t priority;
+#define FCF_SCAN_DONE 0x04 /* FCF table scan done */
+#define FCF_IN_USE 0x08 /* Atleast one discovery completed */
+#define FCF_REDISC_PEND 0x10 /* FCF rediscovery pending */
+#define FCF_REDISC_EVT 0x20 /* FCF rediscovery event to worker thread */
+#define FCF_REDISC_FOV 0x40 /* Post FCF rediscovery fast failover */
uint32_t addr_mode;
- uint16_t vlan_id;
+ struct lpfc_fcf_rec current_rec;
+ struct lpfc_fcf_rec failover_rec;
+ struct timer_list redisc_wait;
};
#define LPFC_REGION23_SIGNATURE "RG23"
@@ -248,7 +264,10 @@
#define SLI4_CT_VFI 2
#define SLI4_CT_FCFI 3
-#define LPFC_SLI4_MAX_SEGMENT_SIZE 0x10000
+#define LPFC_SLI4_FL1_MAX_SEGMENT_SIZE 0x10000
+#define LPFC_SLI4_FL1_MAX_BUF_SIZE 0X2000
+#define LPFC_SLI4_MIN_BUF_SIZE 0x400
+#define LPFC_SLI4_MAX_BUF_SIZE 0x20000
/*
* SLI4 specific data structures
@@ -282,6 +301,42 @@
struct lpfc_hba *phba;
};
+/* Port Capabilities for SLI4 Parameters */
+struct lpfc_pc_sli4_params {
+ uint32_t supported;
+ uint32_t if_type;
+ uint32_t sli_rev;
+ uint32_t sli_family;
+ uint32_t featurelevel_1;
+ uint32_t featurelevel_2;
+ uint32_t proto_types;
+#define LPFC_SLI4_PROTO_FCOE 0x0000001
+#define LPFC_SLI4_PROTO_FC 0x0000002
+#define LPFC_SLI4_PROTO_NIC 0x0000004
+#define LPFC_SLI4_PROTO_ISCSI 0x0000008
+#define LPFC_SLI4_PROTO_RDMA 0x0000010
+ uint32_t sge_supp_len;
+ uint32_t if_page_sz;
+ uint32_t rq_db_window;
+ uint32_t loopbk_scope;
+ uint32_t eq_pages_max;
+ uint32_t eqe_size;
+ uint32_t cq_pages_max;
+ uint32_t cqe_size;
+ uint32_t mq_pages_max;
+ uint32_t mqe_size;
+ uint32_t mq_elem_cnt;
+ uint32_t wq_pages_max;
+ uint32_t wqe_size;
+ uint32_t rq_pages_max;
+ uint32_t rqe_size;
+ uint32_t hdr_pages_max;
+ uint32_t hdr_size;
+ uint32_t hdr_pp_align;
+ uint32_t sgl_pages_max;
+ uint32_t sgl_pp_align;
+};
+
/* SLI4 HBA data structure entries */
struct lpfc_sli4_hba {
void __iomem *conf_regs_memmap_p; /* Kernel memory mapped address for
@@ -295,7 +350,7 @@
void __iomem *UERRHIregaddr; /* Address to UERR_STATUS_HI register */
void __iomem *UEMASKLOregaddr; /* Address to UE_MASK_LO register */
void __iomem *UEMASKHIregaddr; /* Address to UE_MASK_HI register */
- void __iomem *SCRATCHPADregaddr; /* Address to scratchpad register */
+ void __iomem *SLIINTFregaddr; /* Address to SLI_INTF register */
/* BAR1 FCoE function CSR register memory map */
void __iomem *STAregaddr; /* Address to HST_STATE register */
void __iomem *ISRregaddr; /* Address to HST_ISR register */
@@ -310,6 +365,8 @@
uint32_t ue_mask_lo;
uint32_t ue_mask_hi;
+ struct lpfc_register sli_intf;
+ struct lpfc_pc_sli4_params pc_sli4_params;
struct msix_entry *msix_entries;
uint32_t cfg_eqn;
struct lpfc_fcp_eq_hdl *fcp_eq_hdl; /* FCP per-WQ handle */
@@ -406,6 +463,8 @@
void lpfc_sli4_mbx_sge_set(struct lpfcMboxq *, uint32_t, dma_addr_t, uint32_t);
void lpfc_sli4_mbx_sge_get(struct lpfcMboxq *, uint32_t,
struct lpfc_mbx_sge *);
+int lpfc_sli4_mbx_read_fcf_record(struct lpfc_hba *, struct lpfcMboxq *,
+ uint16_t);
void lpfc_sli4_hba_reset(struct lpfc_hba *);
struct lpfc_queue *lpfc_sli4_queue_alloc(struct lpfc_hba *, uint32_t,
@@ -448,6 +507,7 @@
void lpfc_sli4_free_rpi(struct lpfc_hba *, int);
void lpfc_sli4_remove_rpis(struct lpfc_hba *);
void lpfc_sli4_async_event_proc(struct lpfc_hba *);
+void lpfc_sli4_fcf_redisc_event_proc(struct lpfc_hba *);
int lpfc_sli4_resume_rpi(struct lpfc_nodelist *);
void lpfc_sli4_fcp_xri_abort_event_proc(struct lpfc_hba *);
void lpfc_sli4_els_xri_abort_event_proc(struct lpfc_hba *);
diff --git a/drivers/scsi/lpfc/lpfc_version.h b/drivers/scsi/lpfc/lpfc_version.h
index 792f722..ac276aa 100644
--- a/drivers/scsi/lpfc/lpfc_version.h
+++ b/drivers/scsi/lpfc/lpfc_version.h
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2009 Emulex. All rights reserved. *
+ * Copyright (C) 2004-2010 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* *
@@ -18,7 +18,7 @@
* included with this package. *
*******************************************************************/
-#define LPFC_DRIVER_VERSION "8.3.7"
+#define LPFC_DRIVER_VERSION "8.3.9"
#define LPFC_DRIVER_NAME "lpfc"
#define LPFC_SP_DRIVER_HANDLER_NAME "lpfc:sp"
#define LPFC_FP_DRIVER_HANDLER_NAME "lpfc:fp"
diff --git a/drivers/scsi/lpfc/lpfc_vport.c b/drivers/scsi/lpfc/lpfc_vport.c
index e3c7fa6..dc86e87 100644
--- a/drivers/scsi/lpfc/lpfc_vport.c
+++ b/drivers/scsi/lpfc/lpfc_vport.c
@@ -389,7 +389,7 @@
* by the port.
*/
if ((phba->sli_rev == LPFC_SLI_REV4) &&
- (pport->vpi_state & LPFC_VPI_REGISTERED)) {
+ (pport->fc_flag & FC_VFI_REGISTERED)) {
rc = lpfc_sli4_init_vpi(phba, vpi);
if (rc) {
lpfc_printf_log(phba, KERN_ERR, LOG_VPORT,
@@ -505,6 +505,7 @@
struct lpfc_vport *vport = *(struct lpfc_vport **)fc_vport->dd_data;
struct lpfc_hba *phba = vport->phba;
struct lpfc_nodelist *ndlp = NULL;
+ struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
if ((phba->link_state < LPFC_LINK_UP) ||
(phba->fc_topology == TOPOLOGY_LOOP)) {
@@ -512,10 +513,10 @@
return VPORT_OK;
}
- spin_lock_irq(&phba->hbalock);
+ spin_lock_irq(shost->host_lock);
vport->load_flag |= FC_LOADING;
vport->fc_flag |= FC_VPORT_NEEDS_REG_VPI;
- spin_unlock_irq(&phba->hbalock);
+ spin_unlock_irq(shost->host_lock);
/* Use the Physical nodes Fabric NDLP to determine if the link is
* up and ready to FDISC.
diff --git a/drivers/scsi/mac_esp.c b/drivers/scsi/mac_esp.c
index c24e86f..dd808ae 100644
--- a/drivers/scsi/mac_esp.c
+++ b/drivers/scsi/mac_esp.c
@@ -22,7 +22,6 @@
#include <asm/irq.h>
#include <asm/dma.h>
-
#include <asm/macints.h>
#include <asm/macintosh.h>
@@ -279,24 +278,27 @@
* Programmed IO routines follow.
*/
-static inline int mac_esp_wait_for_fifo(struct esp *esp)
+static inline unsigned int mac_esp_wait_for_fifo(struct esp *esp)
{
int i = 500000;
do {
- if (esp_read8(ESP_FFLAGS) & ESP_FF_FBYTES)
- return 0;
+ unsigned int fbytes = esp_read8(ESP_FFLAGS) & ESP_FF_FBYTES;
+
+ if (fbytes)
+ return fbytes;
udelay(2);
} while (--i);
printk(KERN_ERR PFX "FIFO is empty (sreg %02x)\n",
esp_read8(ESP_STATUS));
- return 1;
+ return 0;
}
static inline int mac_esp_wait_for_intr(struct esp *esp)
{
+ struct mac_esp_priv *mep = MAC_ESP_GET_PRIV(esp);
int i = 500000;
do {
@@ -308,6 +310,7 @@
} while (--i);
printk(KERN_ERR PFX "IRQ timeout (sreg %02x)\n", esp->sreg);
+ mep->error = 1;
return 1;
}
@@ -347,11 +350,10 @@
static void mac_esp_send_pio_cmd(struct esp *esp, u32 addr, u32 esp_count,
u32 dma_count, int write, u8 cmd)
{
- unsigned long flags;
struct mac_esp_priv *mep = MAC_ESP_GET_PRIV(esp);
u8 *fifo = esp->regs + ESP_FDATA * 16;
- local_irq_save(flags);
+ disable_irq(esp->host->irq);
cmd &= ~ESP_CMD_DMA;
mep->error = 0;
@@ -359,11 +361,35 @@
if (write) {
scsi_esp_cmd(esp, cmd);
- if (!mac_esp_wait_for_intr(esp)) {
- if (mac_esp_wait_for_fifo(esp))
- esp_count = 0;
- } else {
- esp_count = 0;
+ while (1) {
+ unsigned int n;
+
+ n = mac_esp_wait_for_fifo(esp);
+ if (!n)
+ break;
+
+ if (n > esp_count)
+ n = esp_count;
+ esp_count -= n;
+
+ MAC_ESP_PIO_LOOP("%2@,%0@+", n);
+
+ if (!esp_count)
+ break;
+
+ if (mac_esp_wait_for_intr(esp))
+ break;
+
+ if (((esp->sreg & ESP_STAT_PMASK) != ESP_DIP) &&
+ ((esp->sreg & ESP_STAT_PMASK) != ESP_MIP))
+ break;
+
+ esp->ireg = esp_read8(ESP_INTRPT);
+ if ((esp->ireg & (ESP_INTR_DC | ESP_INTR_BSERV)) !=
+ ESP_INTR_BSERV)
+ break;
+
+ scsi_esp_cmd(esp, ESP_CMD_TI);
}
} else {
scsi_esp_cmd(esp, ESP_CMD_FLUSH);
@@ -374,47 +400,24 @@
MAC_ESP_PIO_LOOP("%0@+,%2@", esp_count);
scsi_esp_cmd(esp, cmd);
- }
- while (esp_count) {
- unsigned int n;
+ while (esp_count) {
+ unsigned int n;
- if (mac_esp_wait_for_intr(esp)) {
- mep->error = 1;
- break;
- }
-
- if (esp->sreg & ESP_STAT_SPAM) {
- printk(KERN_ERR PFX "gross error\n");
- mep->error = 1;
- break;
- }
-
- n = esp_read8(ESP_FFLAGS) & ESP_FF_FBYTES;
-
- if (write) {
- if (n > esp_count)
- n = esp_count;
- esp_count -= n;
-
- MAC_ESP_PIO_LOOP("%2@,%0@+", n);
-
- if ((esp->sreg & ESP_STAT_PMASK) == ESP_STATP)
+ if (mac_esp_wait_for_intr(esp))
break;
- if (esp_count) {
- esp->ireg = esp_read8(ESP_INTRPT);
- if (esp->ireg & ESP_INTR_DC)
- break;
+ if (((esp->sreg & ESP_STAT_PMASK) != ESP_DOP) &&
+ ((esp->sreg & ESP_STAT_PMASK) != ESP_MOP))
+ break;
- scsi_esp_cmd(esp, ESP_CMD_TI);
- }
- } else {
esp->ireg = esp_read8(ESP_INTRPT);
- if (esp->ireg & ESP_INTR_DC)
+ if ((esp->ireg & (ESP_INTR_DC | ESP_INTR_BSERV)) !=
+ ESP_INTR_BSERV)
break;
- n = MAC_ESP_FIFO_SIZE - n;
+ n = MAC_ESP_FIFO_SIZE -
+ (esp_read8(ESP_FFLAGS) & ESP_FF_FBYTES);
if (n > esp_count)
n = esp_count;
@@ -429,7 +432,7 @@
}
}
- local_irq_restore(flags);
+ enable_irq(esp->host->irq);
}
static int mac_esp_irq_pending(struct esp *esp)
diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c
index d9b8ca5..409648f 100644
--- a/drivers/scsi/megaraid/megaraid_sas.c
+++ b/drivers/scsi/megaraid/megaraid_sas.c
@@ -10,7 +10,7 @@
* 2 of the License, or (at your option) any later version.
*
* FILE : megaraid_sas.c
- * Version : v00.00.04.12-rc1
+ * Version : v00.00.04.17.1-rc1
*
* Authors:
* (email-id : megaraidlinux@lsi.com)
@@ -843,6 +843,7 @@
pthru->lun = scp->device->lun;
pthru->cdb_len = scp->cmd_len;
pthru->timeout = 0;
+ pthru->pad_0 = 0;
pthru->flags = flags;
pthru->data_xfer_len = scsi_bufflen(scp);
@@ -874,6 +875,12 @@
pthru->sge_count = megasas_make_sgl32(instance, scp,
&pthru->sgl);
+ if (pthru->sge_count > instance->max_num_sge) {
+ printk(KERN_ERR "megasas: DCDB two many SGE NUM=%x\n",
+ pthru->sge_count);
+ return 0;
+ }
+
/*
* Sense info specific
*/
@@ -1000,6 +1007,12 @@
} else
ldio->sge_count = megasas_make_sgl32(instance, scp, &ldio->sgl);
+ if (ldio->sge_count > instance->max_num_sge) {
+ printk(KERN_ERR "megasas: build_ld_io: sge_count = %x\n",
+ ldio->sge_count);
+ return 0;
+ }
+
/*
* Sense info specific
*/
@@ -2250,6 +2263,7 @@
dcmd->sge_count = 1;
dcmd->flags = MFI_FRAME_DIR_READ;
dcmd->timeout = 0;
+ dcmd->pad_0 = 0;
dcmd->data_xfer_len = MEGASAS_MAX_PD * sizeof(struct MR_PD_LIST);
dcmd->opcode = MR_DCMD_PD_LIST_QUERY;
dcmd->sgl.sge32[0].phys_addr = ci_h;
@@ -2294,6 +2308,86 @@
return ret;
}
+/*
+ * megasas_get_ld_list_info - Returns FW's ld_list structure
+ * @instance: Adapter soft state
+ * @ld_list: ld_list structure
+ *
+ * Issues an internal command (DCMD) to get the FW's controller PD
+ * list structure. This information is mainly used to find out SYSTEM
+ * supported by the FW.
+ */
+static int
+megasas_get_ld_list(struct megasas_instance *instance)
+{
+ int ret = 0, ld_index = 0, ids = 0;
+ struct megasas_cmd *cmd;
+ struct megasas_dcmd_frame *dcmd;
+ struct MR_LD_LIST *ci;
+ dma_addr_t ci_h = 0;
+
+ cmd = megasas_get_cmd(instance);
+
+ if (!cmd) {
+ printk(KERN_DEBUG "megasas_get_ld_list: Failed to get cmd\n");
+ return -ENOMEM;
+ }
+
+ dcmd = &cmd->frame->dcmd;
+
+ ci = pci_alloc_consistent(instance->pdev,
+ sizeof(struct MR_LD_LIST),
+ &ci_h);
+
+ if (!ci) {
+ printk(KERN_DEBUG "Failed to alloc mem in get_ld_list\n");
+ megasas_return_cmd(instance, cmd);
+ return -ENOMEM;
+ }
+
+ memset(ci, 0, sizeof(*ci));
+ memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE);
+
+ dcmd->cmd = MFI_CMD_DCMD;
+ dcmd->cmd_status = 0xFF;
+ dcmd->sge_count = 1;
+ dcmd->flags = MFI_FRAME_DIR_READ;
+ dcmd->timeout = 0;
+ dcmd->data_xfer_len = sizeof(struct MR_LD_LIST);
+ dcmd->opcode = MR_DCMD_LD_GET_LIST;
+ dcmd->sgl.sge32[0].phys_addr = ci_h;
+ dcmd->sgl.sge32[0].length = sizeof(struct MR_LD_LIST);
+ dcmd->pad_0 = 0;
+
+ if (!megasas_issue_polled(instance, cmd)) {
+ ret = 0;
+ } else {
+ ret = -1;
+ }
+
+ /* the following function will get the instance PD LIST */
+
+ if ((ret == 0) && (ci->ldCount < MAX_LOGICAL_DRIVES)) {
+ memset(instance->ld_ids, 0xff, MEGASAS_MAX_LD_IDS);
+
+ for (ld_index = 0; ld_index < ci->ldCount; ld_index++) {
+ if (ci->ldList[ld_index].state != 0) {
+ ids = ci->ldList[ld_index].ref.targetId;
+ instance->ld_ids[ids] =
+ ci->ldList[ld_index].ref.targetId;
+ }
+ }
+ }
+
+ pci_free_consistent(instance->pdev,
+ sizeof(struct MR_LD_LIST),
+ ci,
+ ci_h);
+
+ megasas_return_cmd(instance, cmd);
+ return ret;
+}
+
/**
* megasas_get_controller_info - Returns FW's controller structure
* @instance: Adapter soft state
@@ -2339,6 +2433,7 @@
dcmd->sge_count = 1;
dcmd->flags = MFI_FRAME_DIR_READ;
dcmd->timeout = 0;
+ dcmd->pad_0 = 0;
dcmd->data_xfer_len = sizeof(struct megasas_ctrl_info);
dcmd->opcode = MR_DCMD_CTRL_GET_INFO;
dcmd->sgl.sge32[0].phys_addr = ci_h;
@@ -2590,6 +2685,9 @@
(MEGASAS_MAX_PD * sizeof(struct megasas_pd_list)));
megasas_get_pd_list(instance);
+ memset(instance->ld_ids, 0xff, MEGASAS_MAX_LD_IDS);
+ megasas_get_ld_list(instance);
+
ctrl_info = kmalloc(sizeof(struct megasas_ctrl_info), GFP_KERNEL);
/*
@@ -2714,6 +2812,7 @@
dcmd->sge_count = 1;
dcmd->flags = MFI_FRAME_DIR_READ;
dcmd->timeout = 0;
+ dcmd->pad_0 = 0;
dcmd->data_xfer_len = sizeof(struct megasas_evt_log_info);
dcmd->opcode = MR_DCMD_CTRL_EVENT_GET_INFO;
dcmd->sgl.sge32[0].phys_addr = el_info_h;
@@ -2828,6 +2927,7 @@
dcmd->sge_count = 1;
dcmd->flags = MFI_FRAME_DIR_READ;
dcmd->timeout = 0;
+ dcmd->pad_0 = 0;
dcmd->data_xfer_len = sizeof(struct megasas_evt_detail);
dcmd->opcode = MR_DCMD_CTRL_EVENT_WAIT;
dcmd->mbox.w[0] = seq_num;
@@ -3166,6 +3266,7 @@
dcmd->sge_count = 0;
dcmd->flags = MFI_FRAME_DIR_NONE;
dcmd->timeout = 0;
+ dcmd->pad_0 = 0;
dcmd->data_xfer_len = 0;
dcmd->opcode = MR_DCMD_CTRL_CACHE_FLUSH;
dcmd->mbox.b[0] = MR_FLUSH_CTRL_CACHE | MR_FLUSH_DISK_CACHE;
@@ -3205,6 +3306,7 @@
dcmd->sge_count = 0;
dcmd->flags = MFI_FRAME_DIR_NONE;
dcmd->timeout = 0;
+ dcmd->pad_0 = 0;
dcmd->data_xfer_len = 0;
dcmd->opcode = opcode;
@@ -3984,6 +4086,7 @@
struct Scsi_Host *host;
struct scsi_device *sdev1;
u16 pd_index = 0;
+ u16 ld_index = 0;
int i, j, doscan = 0;
u32 seq_num;
int error;
@@ -3999,8 +4102,124 @@
switch (instance->evt_detail->code) {
case MR_EVT_PD_INSERTED:
+ if (megasas_get_pd_list(instance) == 0) {
+ for (i = 0; i < MEGASAS_MAX_PD_CHANNELS; i++) {
+ for (j = 0;
+ j < MEGASAS_MAX_DEV_PER_CHANNEL;
+ j++) {
+
+ pd_index =
+ (i * MEGASAS_MAX_DEV_PER_CHANNEL) + j;
+
+ sdev1 =
+ scsi_device_lookup(host, i, j, 0);
+
+ if (instance->pd_list[pd_index].driveState
+ == MR_PD_STATE_SYSTEM) {
+ if (!sdev1) {
+ scsi_add_device(host, i, j, 0);
+ }
+
+ if (sdev1)
+ scsi_device_put(sdev1);
+ }
+ }
+ }
+ }
+ doscan = 0;
+ break;
+
case MR_EVT_PD_REMOVED:
+ if (megasas_get_pd_list(instance) == 0) {
+ megasas_get_pd_list(instance);
+ for (i = 0; i < MEGASAS_MAX_PD_CHANNELS; i++) {
+ for (j = 0;
+ j < MEGASAS_MAX_DEV_PER_CHANNEL;
+ j++) {
+
+ pd_index =
+ (i * MEGASAS_MAX_DEV_PER_CHANNEL) + j;
+
+ sdev1 =
+ scsi_device_lookup(host, i, j, 0);
+
+ if (instance->pd_list[pd_index].driveState
+ == MR_PD_STATE_SYSTEM) {
+ if (sdev1) {
+ scsi_device_put(sdev1);
+ }
+ } else {
+ if (sdev1) {
+ scsi_remove_device(sdev1);
+ scsi_device_put(sdev1);
+ }
+ }
+ }
+ }
+ }
+ doscan = 0;
+ break;
+
+ case MR_EVT_LD_OFFLINE:
+ case MR_EVT_LD_DELETED:
+ megasas_get_ld_list(instance);
+ for (i = 0; i < MEGASAS_MAX_LD_CHANNELS; i++) {
+ for (j = 0;
+ j < MEGASAS_MAX_DEV_PER_CHANNEL;
+ j++) {
+
+ ld_index =
+ (i * MEGASAS_MAX_DEV_PER_CHANNEL) + j;
+
+ sdev1 = scsi_device_lookup(host,
+ i + MEGASAS_MAX_LD_CHANNELS,
+ j,
+ 0);
+
+ if (instance->ld_ids[ld_index] != 0xff) {
+ if (sdev1) {
+ scsi_device_put(sdev1);
+ }
+ } else {
+ if (sdev1) {
+ scsi_remove_device(sdev1);
+ scsi_device_put(sdev1);
+ }
+ }
+ }
+ }
+ doscan = 0;
+ break;
+ case MR_EVT_LD_CREATED:
+ megasas_get_ld_list(instance);
+ for (i = 0; i < MEGASAS_MAX_LD_CHANNELS; i++) {
+ for (j = 0;
+ j < MEGASAS_MAX_DEV_PER_CHANNEL;
+ j++) {
+ ld_index =
+ (i * MEGASAS_MAX_DEV_PER_CHANNEL) + j;
+
+ sdev1 = scsi_device_lookup(host,
+ i+MEGASAS_MAX_LD_CHANNELS,
+ j, 0);
+
+ if (instance->ld_ids[ld_index] !=
+ 0xff) {
+ if (!sdev1) {
+ scsi_add_device(host,
+ i + 2,
+ j, 0);
+ }
+ }
+ if (sdev1) {
+ scsi_device_put(sdev1);
+ }
+ }
+ }
+ doscan = 0;
+ break;
case MR_EVT_CTRL_HOST_BUS_SCAN_REQUESTED:
+ case MR_EVT_FOREIGN_CFG_IMPORTED:
doscan = 1;
break;
default:
@@ -4035,6 +4254,31 @@
}
}
}
+
+ megasas_get_ld_list(instance);
+ for (i = 0; i < MEGASAS_MAX_LD_CHANNELS; i++) {
+ for (j = 0; j < MEGASAS_MAX_DEV_PER_CHANNEL; j++) {
+ ld_index =
+ (i * MEGASAS_MAX_DEV_PER_CHANNEL) + j;
+
+ sdev1 = scsi_device_lookup(host,
+ i+MEGASAS_MAX_LD_CHANNELS, j, 0);
+ if (instance->ld_ids[ld_index] != 0xff) {
+ if (!sdev1) {
+ scsi_add_device(host,
+ i+2,
+ j, 0);
+ } else {
+ scsi_device_put(sdev1);
+ }
+ } else {
+ if (sdev1) {
+ scsi_remove_device(sdev1);
+ scsi_device_put(sdev1);
+ }
+ }
+ }
+ }
}
if ( instance->aen_cmd != NULL ) {
diff --git a/drivers/scsi/megaraid/megaraid_sas.h b/drivers/scsi/megaraid/megaraid_sas.h
index 72b28e4..9d8b6bf 100644
--- a/drivers/scsi/megaraid/megaraid_sas.h
+++ b/drivers/scsi/megaraid/megaraid_sas.h
@@ -18,9 +18,9 @@
/*
* MegaRAID SAS Driver meta data
*/
-#define MEGASAS_VERSION "00.00.04.12-rc1"
-#define MEGASAS_RELDATE "Sep. 17, 2009"
-#define MEGASAS_EXT_VERSION "Thu Sep. 17 11:41:51 PST 2009"
+#define MEGASAS_VERSION "00.00.04.17.1-rc1"
+#define MEGASAS_RELDATE "Oct. 29, 2009"
+#define MEGASAS_EXT_VERSION "Thu. Oct. 29, 11:41:51 PST 2009"
/*
* Device IDs
@@ -117,6 +117,7 @@
#define MFI_CMD_STP 0x08
#define MR_DCMD_CTRL_GET_INFO 0x01010000
+#define MR_DCMD_LD_GET_LIST 0x03010000
#define MR_DCMD_CTRL_CACHE_FLUSH 0x01101000
#define MR_FLUSH_CTRL_CACHE 0x01
@@ -349,6 +350,32 @@
u8 driveState;
} __packed;
+ /*
+ * defines the logical drive reference structure
+ */
+union MR_LD_REF {
+ struct {
+ u8 targetId;
+ u8 reserved;
+ u16 seqNum;
+ };
+ u32 ref;
+} __packed;
+
+/*
+ * defines the logical drive list structure
+ */
+struct MR_LD_LIST {
+ u32 ldCount;
+ u32 reserved;
+ struct {
+ union MR_LD_REF ref;
+ u8 state;
+ u8 reserved[3];
+ u64 size;
+ } ldList[MAX_LOGICAL_DRIVES];
+} __packed;
+
/*
* SAS controller properties
*/
@@ -637,6 +664,8 @@
#define MEGASAS_MAX_LD 64
#define MEGASAS_MAX_PD (MEGASAS_MAX_PD_CHANNELS * \
MEGASAS_MAX_DEV_PER_CHANNEL)
+#define MEGASAS_MAX_LD_IDS (MEGASAS_MAX_LD_CHANNELS * \
+ MEGASAS_MAX_DEV_PER_CHANNEL)
#define MEGASAS_DBG_LVL 1
@@ -1187,6 +1216,7 @@
struct megasas_register_set __iomem *reg_set;
struct megasas_pd_list pd_list[MEGASAS_MAX_PD];
+ u8 ld_ids[MEGASAS_MAX_LD_IDS];
s8 init_id;
u16 max_num_sge;
diff --git a/drivers/scsi/mpt2sas/Kconfig b/drivers/scsi/mpt2sas/Kconfig
index 70c4c24..ba8e128 100644
--- a/drivers/scsi/mpt2sas/Kconfig
+++ b/drivers/scsi/mpt2sas/Kconfig
@@ -44,6 +44,7 @@
tristate "LSI MPT Fusion SAS 2.0 Device Driver"
depends on PCI && SCSI
select SCSI_SAS_ATTRS
+ select RAID_ATTRS
---help---
This driver supports PCI-Express SAS 6Gb/s Host Adapters.
diff --git a/drivers/scsi/mpt2sas/mpi/mpi2.h b/drivers/scsi/mpt2sas/mpi/mpi2.h
index 9141681..9958d84 100644
--- a/drivers/scsi/mpt2sas/mpi/mpi2.h
+++ b/drivers/scsi/mpt2sas/mpi/mpi2.h
@@ -8,7 +8,7 @@
* scatter/gather formats.
* Creation Date: June 21, 2006
*
- * mpi2.h Version: 02.00.13
+ * mpi2.h Version: 02.00.14
*
* Version History
* ---------------
@@ -53,6 +53,10 @@
* bytes reserved.
* Added RAID Accelerator functionality.
* 07-30-09 02.00.13 Bumped MPI2_HEADER_VERSION_UNIT.
+ * 10-28-09 02.00.14 Bumped MPI2_HEADER_VERSION_UNIT.
+ * Added MSI-x index mask and shift for Reply Post Host
+ * Index register.
+ * Added function code for Host Based Discovery Action.
* --------------------------------------------------------------------------
*/
@@ -78,7 +82,7 @@
#define MPI2_VERSION_02_00 (0x0200)
/* versioning for this MPI header set */
-#define MPI2_HEADER_VERSION_UNIT (0x0D)
+#define MPI2_HEADER_VERSION_UNIT (0x0E)
#define MPI2_HEADER_VERSION_DEV (0x00)
#define MPI2_HEADER_VERSION_UNIT_MASK (0xFF00)
#define MPI2_HEADER_VERSION_UNIT_SHIFT (8)
@@ -232,9 +236,12 @@
#define MPI2_REPLY_FREE_HOST_INDEX_OFFSET (0x00000048)
/*
- * Offset for the Reply Descriptor Post Queue
+ * Defines for the Reply Descriptor Post Queue
*/
#define MPI2_REPLY_POST_HOST_INDEX_OFFSET (0x0000006C)
+#define MPI2_REPLY_POST_HOST_INDEX_MASK (0x00FFFFFF)
+#define MPI2_RPHI_MSIX_INDEX_MASK (0xFF000000)
+#define MPI2_RPHI_MSIX_INDEX_SHIFT (24)
/*
* Defines for the HCBSize and address
@@ -497,12 +504,13 @@
#define MPI2_FUNCTION_TARGET_CMD_BUF_BASE_POST (0x24) /* Target Command Buffer Post Base */
#define MPI2_FUNCTION_TARGET_CMD_BUF_LIST_POST (0x25) /* Target Command Buffer Post List */
#define MPI2_FUNCTION_RAID_ACCELERATOR (0x2C) /* RAID Accelerator*/
+/* Host Based Discovery Action */
+#define MPI2_FUNCTION_HOST_BASED_DISCOVERY_ACTION (0x2F)
/* Doorbell functions */
#define MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET (0x40)
-/* #define MPI2_FUNCTION_IO_UNIT_RESET (0x41) */
#define MPI2_FUNCTION_HANDSHAKE (0x42)
diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h b/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h
index 1611c57..cf0ac9f 100644
--- a/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h
+++ b/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h
@@ -6,7 +6,7 @@
* Title: MPI Configuration messages and pages
* Creation Date: November 10, 2006
*
- * mpi2_cnfg.h Version: 02.00.12
+ * mpi2_cnfg.h Version: 02.00.13
*
* Version History
* ---------------
@@ -107,6 +107,8 @@
* to SAS Device Page 0 Flags field.
* Added PhyInfo defines for power condition.
* Added Ethernet configuration pages.
+ * 10-28-09 02.00.13 Added MPI2_IOUNITPAGE1_ENABLE_HOST_BASED_DISCOVERY.
+ * Added SAS PHY Page 4 structure and defines.
* --------------------------------------------------------------------------
*/
@@ -712,6 +714,7 @@
#define MPI2_IOUNITPAGE1_PAGEVERSION (0x04)
/* IO Unit Page 1 Flags defines */
+#define MPI2_IOUNITPAGE1_ENABLE_HOST_BASED_DISCOVERY (0x00000800)
#define MPI2_IOUNITPAGE1_MASK_SATA_WRITE_CACHE (0x00000600)
#define MPI2_IOUNITPAGE1_ENABLE_SATA_WRITE_CACHE (0x00000000)
#define MPI2_IOUNITPAGE1_DISABLE_SATA_WRITE_CACHE (0x00000200)
@@ -2291,6 +2294,26 @@
#define MPI2_SASPHY3_PAGEVERSION (0x00)
+/* SAS PHY Page 4 */
+
+typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_4 {
+ MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
+ U16 Reserved1; /* 0x08 */
+ U8 Reserved2; /* 0x0A */
+ U8 Flags; /* 0x0B */
+ U8 InitialFrame[28]; /* 0x0C */
+} MPI2_CONFIG_PAGE_SAS_PHY_4, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_PHY_4,
+ Mpi2SasPhyPage4_t, MPI2_POINTER pMpi2SasPhyPage4_t;
+
+#define MPI2_SASPHY4_PAGEVERSION (0x00)
+
+/* values for the Flags field */
+#define MPI2_SASPHY4_FLAGS_FRAME_VALID (0x02)
+#define MPI2_SASPHY4_FLAGS_SATA_FRAME (0x01)
+
+
+
+
/****************************************************************************
* SAS Port Config Pages
****************************************************************************/
diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_history.txt b/drivers/scsi/mpt2sas/mpi/mpi2_history.txt
index 65fcaa3..c4adf76 100644
--- a/drivers/scsi/mpt2sas/mpi/mpi2_history.txt
+++ b/drivers/scsi/mpt2sas/mpi/mpi2_history.txt
@@ -5,23 +5,24 @@
Copyright (c) 2000-2009 LSI Corporation.
---------------------------------------
- Header Set Release Version: 02.00.12
- Header Set Release Date: 05-06-09
+ Header Set Release Version: 02.00.14
+ Header Set Release Date: 10-28-09
---------------------------------------
Filename Current version Prior version
---------- --------------- -------------
- mpi2.h 02.00.12 02.00.11
- mpi2_cnfg.h 02.00.11 02.00.10
- mpi2_init.h 02.00.07 02.00.06
- mpi2_ioc.h 02.00.11 02.00.10
- mpi2_raid.h 02.00.03 02.00.03
- mpi2_sas.h 02.00.02 02.00.02
+ mpi2.h 02.00.14 02.00.13
+ mpi2_cnfg.h 02.00.13 02.00.12
+ mpi2_init.h 02.00.08 02.00.07
+ mpi2_ioc.h 02.00.13 02.00.12
+ mpi2_raid.h 02.00.04 02.00.04
+ mpi2_sas.h 02.00.03 02.00.02
mpi2_targ.h 02.00.03 02.00.03
- mpi2_tool.h 02.00.03 02.00.02
+ mpi2_tool.h 02.00.04 02.00.04
mpi2_type.h 02.00.00 02.00.00
- mpi2_ra.h 02.00.00
- mpi2_history.txt 02.00.11 02.00.12
+ mpi2_ra.h 02.00.00 02.00.00
+ mpi2_hbd.h 02.00.00
+ mpi2_history.txt 02.00.14 02.00.13
* Date Version Description
@@ -65,6 +66,11 @@
* MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR and made those
* bytes reserved.
* Added RAID Accelerator functionality.
+ * 07-30-09 02.00.13 Bumped MPI2_HEADER_VERSION_UNIT.
+ * 10-28-09 02.00.14 Bumped MPI2_HEADER_VERSION_UNIT.
+ * Added MSI-x index mask and shift for Reply Post Host
+ * Index register.
+ * Added function code for Host Based Discovery Action.
* --------------------------------------------------------------------------
mpi2_cnfg.h
@@ -155,6 +161,15 @@
* Added expander reduced functionality data to SAS
* Expander Page 0.
* Added SAS PHY Page 2 and SAS PHY Page 3.
+ * 07-30-09 02.00.12 Added IO Unit Page 7.
+ * Added new device ids.
+ * Added SAS IO Unit Page 5.
+ * Added partial and slumber power management capable flags
+ * to SAS Device Page 0 Flags field.
+ * Added PhyInfo defines for power condition.
+ * Added Ethernet configuration pages.
+ * 10-28-09 02.00.13 Added MPI2_IOUNITPAGE1_ENABLE_HOST_BASED_DISCOVERY.
+ * Added SAS PHY Page 4 structure and defines.
* --------------------------------------------------------------------------
mpi2_init.h
@@ -172,6 +187,10 @@
* Query Asynchronous Event.
* Defined two new bits in the SlotStatus field of the SCSI
* Enclosure Processor Request and Reply.
+ * 10-28-09 02.00.08 Added defines for decoding the ResponseInfo bytes for
+ * both SCSI IO Error Reply and SCSI Task Management Reply.
+ * Added ResponseInfo field to MPI2_SCSI_TASK_MANAGE_REPLY.
+ * Added MPI2_SCSITASKMGMT_RSP_TM_OVERLAPPED_TAG define.
* --------------------------------------------------------------------------
mpi2_ioc.h
@@ -246,6 +265,20 @@
* Added two new reason codes for SAS Device Status Change
* Event.
* Added new event: SAS PHY Counter.
+ * 07-30-09 02.00.12 Added GPIO Interrupt event define and structure.
+ * Added MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER define.
+ * Added new product id family for 2208.
+ * 10-28-09 02.00.13 Added HostMSIxVectors field to MPI2_IOC_INIT_REQUEST.
+ * Added MaxMSIxVectors field to MPI2_IOC_FACTS_REPLY.
+ * Added MinDevHandle field to MPI2_IOC_FACTS_REPLY.
+ * Added MPI2_IOCFACTS_CAPABILITY_HOST_BASED_DISCOVERY.
+ * Added MPI2_EVENT_HOST_BASED_DISCOVERY_PHY define.
+ * Added MPI2_EVENT_SAS_TOPO_ES_NO_EXPANDER define.
+ * Added Host Based Discovery Phy Event data.
+ * Added defines for ProductID Product field
+ * (MPI2_FW_HEADER_PID_).
+ * Modified values for SAS ProductID Family
+ * (MPI2_FW_HEADER_PID_FAMILY_).
* --------------------------------------------------------------------------
mpi2_raid.h
@@ -256,6 +289,8 @@
* 05-21-08 02.00.03 Added MPI2_RAID_VOL_CREATION_NUM_PHYSDISKS so that
* the PhysDisk array in MPI2_RAID_VOLUME_CREATION_STRUCT
* can be sized by the build environment.
+ * 07-30-09 02.00.04 Added proper define for the Use Default Settings bit of
+ * VolumeCreationFlags and marked the old one as obsolete.
* --------------------------------------------------------------------------
mpi2_sas.h
@@ -264,6 +299,8 @@
* Control Request.
* 10-02-08 02.00.02 Added Set IOC Parameter Operation to SAS IO Unit Control
* Request.
+ * 10-28-09 02.00.03 Changed the type of SGL in MPI2_SATA_PASSTHROUGH_REQUEST
+ * to MPI2_SGE_IO_UNION since it supports chained SGLs.
* --------------------------------------------------------------------------
mpi2_targ.h
@@ -283,6 +320,10 @@
* structures and defines.
* 02-29-08 02.00.02 Modified various names to make them 32-character unique.
* 05-06-09 02.00.03 Added ISTWI Read Write Tool and Diagnostic CLI Tool.
+ * 07-30-09 02.00.04 Added ExtendedType field to DiagnosticBufferPost request
+ * and reply messages.
+ * Added MPI2_DIAG_BUF_TYPE_EXTENDED.
+ * Incremented MPI2_DIAG_BUF_TYPE_COUNT.
* --------------------------------------------------------------------------
mpi2_type.h
@@ -293,20 +334,26 @@
* 05-06-09 02.00.00 Initial version.
* --------------------------------------------------------------------------
+mpi2_hbd.h
+ * 10-28-09 02.00.00 Initial version.
+ * --------------------------------------------------------------------------
+
+
mpi2_history.txt Parts list history
-Filename 02.00.12
----------- --------
-mpi2.h 02.00.12
-mpi2_cnfg.h 02.00.11
-mpi2_init.h 02.00.07
-mpi2_ioc.h 02.00.11
-mpi2_raid.h 02.00.03
-mpi2_sas.h 02.00.02
-mpi2_targ.h 02.00.03
-mpi2_tool.h 02.00.03
-mpi2_type.h 02.00.00
-mpi2_ra.h 02.00.00
+Filename 02.00.14 02.00.13 02.00.12
+---------- -------- -------- --------
+mpi2.h 02.00.14 02.00.13 02.00.12
+mpi2_cnfg.h 02.00.13 02.00.12 02.00.11
+mpi2_init.h 02.00.08 02.00.07 02.00.07
+mpi2_ioc.h 02.00.13 02.00.12 02.00.11
+mpi2_raid.h 02.00.04 02.00.04 02.00.03
+mpi2_sas.h 02.00.03 02.00.02 02.00.02
+mpi2_targ.h 02.00.03 02.00.03 02.00.03
+mpi2_tool.h 02.00.04 02.00.04 02.00.03
+mpi2_type.h 02.00.00 02.00.00 02.00.00
+mpi2_ra.h 02.00.00 02.00.00 02.00.00
+mpi2_hbd.h 02.00.00
Filename 02.00.11 02.00.10 02.00.09 02.00.08 02.00.07 02.00.06
---------- -------- -------- -------- -------- -------- --------
diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_init.h b/drivers/scsi/mpt2sas/mpi/mpi2_init.h
index 563e56d..6541945 100644
--- a/drivers/scsi/mpt2sas/mpi/mpi2_init.h
+++ b/drivers/scsi/mpt2sas/mpi/mpi2_init.h
@@ -6,7 +6,7 @@
* Title: MPI SCSI initiator mode messages and structures
* Creation Date: June 23, 2006
*
- * mpi2_init.h Version: 02.00.07
+ * mpi2_init.h Version: 02.00.08
*
* Version History
* ---------------
@@ -27,6 +27,10 @@
* Query Asynchronous Event.
* Defined two new bits in the SlotStatus field of the SCSI
* Enclosure Processor Request and Reply.
+ * 10-28-09 02.00.08 Added defines for decoding the ResponseInfo bytes for
+ * both SCSI IO Error Reply and SCSI Task Management Reply.
+ * Added ResponseInfo field to MPI2_SCSI_TASK_MANAGE_REPLY.
+ * Added MPI2_SCSITASKMGMT_RSP_TM_OVERLAPPED_TAG define.
* --------------------------------------------------------------------------
*/
@@ -254,6 +258,11 @@
#define MPI2_SCSI_STATE_AUTOSENSE_FAILED (0x02)
#define MPI2_SCSI_STATE_AUTOSENSE_VALID (0x01)
+/* masks and shifts for the ResponseInfo field */
+
+#define MPI2_SCSI_RI_MASK_REASONCODE (0x000000FF)
+#define MPI2_SCSI_RI_SHIFT_REASONCODE (0)
+
#define MPI2_SCSI_TASKTAG_UNKNOWN (0xFFFF)
@@ -327,6 +336,7 @@
U16 IOCStatus; /* 0x0E */
U32 IOCLogInfo; /* 0x10 */
U32 TerminationCount; /* 0x14 */
+ U32 ResponseInfo; /* 0x18 */
} MPI2_SCSI_TASK_MANAGE_REPLY,
MPI2_POINTER PTR_MPI2_SCSI_TASK_MANAGE_REPLY,
Mpi2SCSITaskManagementReply_t, MPI2_POINTER pMpi2SCSIManagementReply_t;
@@ -339,8 +349,20 @@
#define MPI2_SCSITASKMGMT_RSP_TM_FAILED (0x05)
#define MPI2_SCSITASKMGMT_RSP_TM_SUCCEEDED (0x08)
#define MPI2_SCSITASKMGMT_RSP_TM_INVALID_LUN (0x09)
+#define MPI2_SCSITASKMGMT_RSP_TM_OVERLAPPED_TAG (0x0A)
#define MPI2_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC (0x80)
+/* masks and shifts for the ResponseInfo field */
+
+#define MPI2_SCSITASKMGMT_RI_MASK_REASONCODE (0x000000FF)
+#define MPI2_SCSITASKMGMT_RI_SHIFT_REASONCODE (0)
+#define MPI2_SCSITASKMGMT_RI_MASK_ARI2 (0x0000FF00)
+#define MPI2_SCSITASKMGMT_RI_SHIFT_ARI2 (8)
+#define MPI2_SCSITASKMGMT_RI_MASK_ARI1 (0x00FF0000)
+#define MPI2_SCSITASKMGMT_RI_SHIFT_ARI1 (16)
+#define MPI2_SCSITASKMGMT_RI_MASK_ARI0 (0xFF000000)
+#define MPI2_SCSITASKMGMT_RI_SHIFT_ARI0 (24)
+
/****************************************************************************
* SCSI Enclosure Processor messages
diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_ioc.h b/drivers/scsi/mpt2sas/mpi/mpi2_ioc.h
index ea51ce8..7549384 100644
--- a/drivers/scsi/mpt2sas/mpi/mpi2_ioc.h
+++ b/drivers/scsi/mpt2sas/mpi/mpi2_ioc.h
@@ -6,7 +6,7 @@
* Title: MPI IOC, Port, Event, FW Download, and FW Upload messages
* Creation Date: October 11, 2006
*
- * mpi2_ioc.h Version: 02.00.12
+ * mpi2_ioc.h Version: 02.00.13
*
* Version History
* ---------------
@@ -87,6 +87,17 @@
* 07-30-09 02.00.12 Added GPIO Interrupt event define and structure.
* Added MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER define.
* Added new product id family for 2208.
+ * 10-28-09 02.00.13 Added HostMSIxVectors field to MPI2_IOC_INIT_REQUEST.
+ * Added MaxMSIxVectors field to MPI2_IOC_FACTS_REPLY.
+ * Added MinDevHandle field to MPI2_IOC_FACTS_REPLY.
+ * Added MPI2_IOCFACTS_CAPABILITY_HOST_BASED_DISCOVERY.
+ * Added MPI2_EVENT_HOST_BASED_DISCOVERY_PHY define.
+ * Added MPI2_EVENT_SAS_TOPO_ES_NO_EXPANDER define.
+ * Added Host Based Discovery Phy Event data.
+ * Added defines for ProductID Product field
+ * (MPI2_FW_HEADER_PID_).
+ * Modified values for SAS ProductID Family
+ * (MPI2_FW_HEADER_PID_FAMILY_).
* --------------------------------------------------------------------------
*/
@@ -119,8 +130,10 @@
U16 MsgVersion; /* 0x0C */
U16 HeaderVersion; /* 0x0E */
U32 Reserved5; /* 0x10 */
- U32 Reserved6; /* 0x14 */
- U16 Reserved7; /* 0x18 */
+ U16 Reserved6; /* 0x14 */
+ U8 Reserved7; /* 0x16 */
+ U8 HostMSIxVectors; /* 0x17 */
+ U16 Reserved8; /* 0x18 */
U16 SystemRequestFrameSize; /* 0x1A */
U16 ReplyDescriptorPostQueueDepth; /* 0x1C */
U16 ReplyFreeQueueDepth; /* 0x1E */
@@ -215,7 +228,7 @@
U8 MaxChainDepth; /* 0x14 */
U8 WhoInit; /* 0x15 */
U8 NumberOfPorts; /* 0x16 */
- U8 Reserved2; /* 0x17 */
+ U8 MaxMSIxVectors; /* 0x17 */
U16 RequestCredit; /* 0x18 */
U16 ProductID; /* 0x1A */
U32 IOCCapabilities; /* 0x1C */
@@ -233,7 +246,8 @@
U8 MaxVolumes; /* 0x37 */
U16 MaxDevHandle; /* 0x38 */
U16 MaxPersistentEntries; /* 0x3A */
- U32 Reserved4; /* 0x3C */
+ U16 MinDevHandle; /* 0x3C */
+ U16 Reserved4; /* 0x3E */
} MPI2_IOC_FACTS_REPLY, MPI2_POINTER PTR_MPI2_IOC_FACTS_REPLY,
Mpi2IOCFactsReply_t, MPI2_POINTER pMpi2IOCFactsReply_t;
@@ -269,6 +283,7 @@
/* ProductID field uses MPI2_FW_HEADER_PID_ */
/* IOCCapabilities */
+#define MPI2_IOCFACTS_CAPABILITY_HOST_BASED_DISCOVERY (0x00010000)
#define MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX (0x00008000)
#define MPI2_IOCFACTS_CAPABILITY_RAID_ACCELERATOR (0x00004000)
#define MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY (0x00002000)
@@ -453,6 +468,7 @@
#define MPI2_EVENT_LOG_ENTRY_ADDED (0x0021)
#define MPI2_EVENT_SAS_PHY_COUNTER (0x0022)
#define MPI2_EVENT_GPIO_INTERRUPT (0x0023)
+#define MPI2_EVENT_HOST_BASED_DISCOVERY_PHY (0x0024)
/* Log Entry Added Event data */
@@ -793,6 +809,7 @@
MPI2_POINTER pMpi2EventDataSasTopologyChangeList_t;
/* values for the ExpStatus field */
+#define MPI2_EVENT_SAS_TOPO_ES_NO_EXPANDER (0x00)
#define MPI2_EVENT_SAS_TOPO_ES_ADDED (0x01)
#define MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING (0x02)
#define MPI2_EVENT_SAS_TOPO_ES_RESPONDING (0x03)
@@ -878,6 +895,44 @@
* */
+/* Host Based Discovery Phy Event data */
+
+typedef struct _MPI2_EVENT_HBD_PHY_SAS {
+ U8 Flags; /* 0x00 */
+ U8 NegotiatedLinkRate; /* 0x01 */
+ U8 PhyNum; /* 0x02 */
+ U8 PhysicalPort; /* 0x03 */
+ U32 Reserved1; /* 0x04 */
+ U8 InitialFrame[28]; /* 0x08 */
+} MPI2_EVENT_HBD_PHY_SAS, MPI2_POINTER PTR_MPI2_EVENT_HBD_PHY_SAS,
+ Mpi2EventHbdPhySas_t, MPI2_POINTER pMpi2EventHbdPhySas_t;
+
+/* values for the Flags field */
+#define MPI2_EVENT_HBD_SAS_FLAGS_FRAME_VALID (0x02)
+#define MPI2_EVENT_HBD_SAS_FLAGS_SATA_FRAME (0x01)
+
+/* use MPI2_SAS_NEG_LINK_RATE_ defines from mpi2_cnfg.h for
+ * the NegotiatedLinkRate field */
+
+typedef union _MPI2_EVENT_HBD_DESCRIPTOR {
+ MPI2_EVENT_HBD_PHY_SAS Sas;
+} MPI2_EVENT_HBD_DESCRIPTOR, MPI2_POINTER PTR_MPI2_EVENT_HBD_DESCRIPTOR,
+ Mpi2EventHbdDescriptor_t, MPI2_POINTER pMpi2EventHbdDescriptor_t;
+
+typedef struct _MPI2_EVENT_DATA_HBD_PHY {
+ U8 DescriptorType; /* 0x00 */
+ U8 Reserved1; /* 0x01 */
+ U16 Reserved2; /* 0x02 */
+ U32 Reserved3; /* 0x04 */
+ MPI2_EVENT_HBD_DESCRIPTOR Descriptor; /* 0x08 */
+} MPI2_EVENT_DATA_HBD_PHY, MPI2_POINTER PTR_MPI2_EVENT_DATA_HBD_PHY,
+ Mpi2EventDataHbdPhy_t, MPI2_POINTER pMpi2EventDataMpi2EventDataHbdPhy_t;
+
+/* values for the DescriptorType field */
+#define MPI2_EVENT_HBD_DT_SAS (0x01)
+
+
+
/****************************************************************************
* EventAck message
****************************************************************************/
@@ -1126,13 +1181,17 @@
#define MPI2_FW_HEADER_PID_TYPE_MASK (0xF000)
#define MPI2_FW_HEADER_PID_TYPE_SAS (0x2000)
-#define MPI2_FW_HEADER_PID_PROD_MASK (0x0F00)
-#define MPI2_FW_HEADER_PID_PROD_A (0x0000)
+#define MPI2_FW_HEADER_PID_PROD_MASK (0x0F00)
+#define MPI2_FW_HEADER_PID_PROD_A (0x0000)
+#define MPI2_FW_HEADER_PID_PROD_MASK (0x0F00)
+#define MPI2_FW_HEADER_PID_PROD_TARGET_INITIATOR_SCSI (0x0200)
+#define MPI2_FW_HEADER_PID_PROD_IR_SCSI (0x0700)
+
#define MPI2_FW_HEADER_PID_FAMILY_MASK (0x00FF)
/* SAS */
-#define MPI2_FW_HEADER_PID_FAMILY_2108_SAS (0x0010)
-#define MPI2_FW_HEADER_PID_FAMILY_2208_SAS (0x0011)
+#define MPI2_FW_HEADER_PID_FAMILY_2108_SAS (0x0013)
+#define MPI2_FW_HEADER_PID_FAMILY_2208_SAS (0x0014)
/* use MPI2_IOCFACTS_PROTOCOL_ defines for ProtocolFlags field */
diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_sas.h b/drivers/scsi/mpt2sas/mpi/mpi2_sas.h
index 8a42b13..2d8aeed 100644
--- a/drivers/scsi/mpt2sas/mpi/mpi2_sas.h
+++ b/drivers/scsi/mpt2sas/mpi/mpi2_sas.h
@@ -6,7 +6,7 @@
* Title: MPI Serial Attached SCSI structures and definitions
* Creation Date: February 9, 2007
*
- * mpi2.h Version: 02.00.02
+ * mpi2.h Version: 02.00.03
*
* Version History
* ---------------
@@ -18,6 +18,8 @@
* Control Request.
* 10-02-08 02.00.02 Added Set IOC Parameter Operation to SAS IO Unit Control
* Request.
+ * 10-28-09 02.00.03 Changed the type of SGL in MPI2_SATA_PASSTHROUGH_REQUEST
+ * to MPI2_SGE_IO_UNION since it supports chained SGLs.
* --------------------------------------------------------------------------
*/
@@ -160,7 +162,7 @@
U32 Reserved4; /* 0x14 */
U32 DataLength; /* 0x18 */
U8 CommandFIS[20]; /* 0x1C */
- MPI2_SIMPLE_SGE_UNION SGL; /* 0x20 */
+ MPI2_SGE_IO_UNION SGL; /* 0x20 */
} MPI2_SATA_PASSTHROUGH_REQUEST, MPI2_POINTER PTR_MPI2_SATA_PASSTHROUGH_REQUEST,
Mpi2SataPassthroughRequest_t, MPI2_POINTER pMpi2SataPassthroughRequest_t;
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c
index 89d0240..88e6eeb 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.c
@@ -107,8 +107,7 @@
if (ret)
return ret;
- printk(KERN_INFO "setting logging_level(0x%08x)\n",
- mpt2sas_fwfault_debug);
+ printk(KERN_INFO "setting fwfault_debug(%d)\n", mpt2sas_fwfault_debug);
list_for_each_entry(ioc, &mpt2sas_ioc_list, list)
ioc->fwfault_debug = mpt2sas_fwfault_debug;
return 0;
@@ -1222,6 +1221,8 @@
u32 memap_sz;
u32 pio_sz;
int i, r = 0;
+ u64 pio_chip = 0;
+ u64 chip_phys = 0;
dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n",
ioc->name, __func__));
@@ -1255,12 +1256,13 @@
if (pci_resource_flags(pdev, i) & PCI_BASE_ADDRESS_SPACE_IO) {
if (pio_sz)
continue;
- ioc->pio_chip = pci_resource_start(pdev, i);
+ pio_chip = (u64)pci_resource_start(pdev, i);
pio_sz = pci_resource_len(pdev, i);
} else {
if (memap_sz)
continue;
ioc->chip_phys = pci_resource_start(pdev, i);
+ chip_phys = (u64)ioc->chip_phys;
memap_sz = pci_resource_len(pdev, i);
ioc->chip = ioremap(ioc->chip_phys, memap_sz);
if (ioc->chip == NULL) {
@@ -1280,10 +1282,10 @@
printk(MPT2SAS_INFO_FMT "%s: IRQ %d\n",
ioc->name, ((ioc->msix_enable) ? "PCI-MSI-X enabled" :
"IO-APIC enabled"), ioc->pci_irq);
- printk(MPT2SAS_INFO_FMT "iomem(0x%lx), mapped(0x%p), size(%d)\n",
- ioc->name, ioc->chip_phys, ioc->chip, memap_sz);
- printk(MPT2SAS_INFO_FMT "ioport(0x%lx), size(%d)\n",
- ioc->name, ioc->pio_chip, pio_sz);
+ printk(MPT2SAS_INFO_FMT "iomem(0x%016llx), mapped(0x%p), size(%d)\n",
+ ioc->name, (unsigned long long)chip_phys, ioc->chip, memap_sz);
+ printk(MPT2SAS_INFO_FMT "ioport(0x%016llx), size(%d)\n",
+ ioc->name, (unsigned long long)pio_chip, pio_sz);
return 0;
@@ -3573,6 +3575,8 @@
init_waitqueue_head(&ioc->reset_wq);
+ ioc->fwfault_debug = mpt2sas_fwfault_debug;
+
/* base internal command bits */
mutex_init(&ioc->base_cmds.mutex);
ioc->base_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.h b/drivers/scsi/mpt2sas/mpt2sas_base.h
index bb4f146..e18b054 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.h
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.h
@@ -69,10 +69,10 @@
#define MPT2SAS_DRIVER_NAME "mpt2sas"
#define MPT2SAS_AUTHOR "LSI Corporation <DL-MPTFusionLinux@lsi.com>"
#define MPT2SAS_DESCRIPTION "LSI MPT Fusion SAS 2.0 Device Driver"
-#define MPT2SAS_DRIVER_VERSION "03.100.03.00"
-#define MPT2SAS_MAJOR_VERSION 03
+#define MPT2SAS_DRIVER_VERSION "04.100.01.00"
+#define MPT2SAS_MAJOR_VERSION 04
#define MPT2SAS_MINOR_VERSION 100
-#define MPT2SAS_BUILD_VERSION 03
+#define MPT2SAS_BUILD_VERSION 01
#define MPT2SAS_RELEASE_VERSION 00
/*
@@ -323,6 +323,7 @@
* @device_info: bitfield provides detailed info about the hidden components
* @num_pds: number of hidden raid components
* @responding: used in _scsih_raid_device_mark_responding
+ * @percent_complete: resync percent complete
*/
struct _raid_device {
struct list_head list;
@@ -336,6 +337,7 @@
u32 device_info;
u8 num_pds;
u8 responding;
+ u8 percent_complete;
};
/**
@@ -464,7 +466,6 @@
* @pdev: pci pdev object
* @chip: memory mapped register space
* @chip_phys: physical addrss prior to mapping
- * @pio_chip: I/O mapped register space
* @logging_level: see mpt2sas_debug.h
* @fwfault_debug: debuging FW timeouts
* @ir_firmware: IR firmware present
@@ -587,8 +588,7 @@
char tmp_string[MPT_STRING_LENGTH];
struct pci_dev *pdev;
Mpi2SystemInterfaceRegs_t __iomem *chip;
- unsigned long chip_phys;
- unsigned long pio_chip;
+ resource_size_t chip_phys;
int logging_level;
int fwfault_debug;
u8 ir_firmware;
@@ -853,6 +853,8 @@
*mpi_reply, Mpi2IOUnitPage1_t *config_page);
int mpt2sas_config_get_sas_iounit_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
*mpi_reply, Mpi2SasIOUnitPage1_t *config_page, u16 sz);
+int mpt2sas_config_set_sas_iounit_pg1(struct MPT2SAS_ADAPTER *ioc,
+ Mpi2ConfigReply_t *mpi_reply, Mpi2SasIOUnitPage1_t *config_page, u16 sz);
int mpt2sas_config_get_ioc_pg8(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
*mpi_reply, Mpi2IOCPage8_t *config_page);
int mpt2sas_config_get_expander_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
diff --git a/drivers/scsi/mpt2sas/mpt2sas_config.c b/drivers/scsi/mpt2sas/mpt2sas_config.c
index 594a389..411c27d 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_config.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_config.c
@@ -324,7 +324,9 @@
if (r != 0)
goto out;
if (mpi_request->Action ==
- MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT) {
+ MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT ||
+ mpi_request->Action ==
+ MPI2_CONFIG_ACTION_PAGE_WRITE_NVRAM) {
ioc->base_add_sg_single(&mpi_request->PageBufferSGE,
MPT2_CONFIG_COMMON_WRITE_SGLFLAGS | mem.sz,
mem.page_dma);
@@ -882,7 +884,7 @@
}
/**
- * mpt2sas_config_get_sas_iounit_pg1 - obtain sas iounit page 0
+ * mpt2sas_config_get_sas_iounit_pg1 - obtain sas iounit page 1
* @ioc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
* @config_page: contents of the config page
@@ -907,7 +909,7 @@
mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT;
mpi_request.Header.PageNumber = 1;
- mpi_request.Header.PageVersion = MPI2_SASIOUNITPAGE0_PAGEVERSION;
+ mpi_request.Header.PageVersion = MPI2_SASIOUNITPAGE1_PAGEVERSION;
mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
@@ -922,6 +924,49 @@
}
/**
+ * mpt2sas_config_set_sas_iounit_pg1 - send sas iounit page 1
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * @sz: size of buffer passed in config_page
+ * Context: sleep.
+ *
+ * Calling function should call config_get_number_hba_phys prior to
+ * this function, so enough memory is allocated for config_page.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+int
+mpt2sas_config_set_sas_iounit_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
+ *mpi_reply, Mpi2SasIOUnitPage1_t *config_page, u16 sz)
+{
+ Mpi2ConfigRequest_t mpi_request;
+ int r;
+
+ memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+ mpi_request.Function = MPI2_FUNCTION_CONFIG;
+ mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+ mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
+ mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT;
+ mpi_request.Header.PageNumber = 1;
+ mpi_request.Header.PageVersion = MPI2_SASIOUNITPAGE1_PAGEVERSION;
+ mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
+ r = _config_request(ioc, &mpi_request, mpi_reply,
+ MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+ if (r)
+ goto out;
+
+ mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT;
+ _config_request(ioc, &mpi_request, mpi_reply,
+ MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sz);
+ mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_NVRAM;
+ r = _config_request(ioc, &mpi_request, mpi_reply,
+ MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sz);
+ out:
+ return r;
+}
+
+/**
* mpt2sas_config_get_expander_pg0 - obtain expander page 0
* @ioc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
diff --git a/drivers/scsi/mpt2sas/mpt2sas_ctl.c b/drivers/scsi/mpt2sas/mpt2sas_ctl.c
index 84a124f..fa9bf83 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_ctl.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_ctl.c
@@ -891,6 +891,7 @@
issue_host_reset:
if (issue_reset) {
+ ret = -ENODATA;
if ((mpi_request->Function == MPI2_FUNCTION_SCSI_IO_REQUEST ||
mpi_request->Function ==
MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH)) {
@@ -2202,14 +2203,10 @@
karg.data_out_size = karg32.data_out_size;
karg.max_sense_bytes = karg32.max_sense_bytes;
karg.data_sge_offset = karg32.data_sge_offset;
- memcpy(&karg.reply_frame_buf_ptr, &karg32.reply_frame_buf_ptr,
- sizeof(uint32_t));
- memcpy(&karg.data_in_buf_ptr, &karg32.data_in_buf_ptr,
- sizeof(uint32_t));
- memcpy(&karg.data_out_buf_ptr, &karg32.data_out_buf_ptr,
- sizeof(uint32_t));
- memcpy(&karg.sense_data_ptr, &karg32.sense_data_ptr,
- sizeof(uint32_t));
+ karg.reply_frame_buf_ptr = compat_ptr(karg32.reply_frame_buf_ptr);
+ karg.data_in_buf_ptr = compat_ptr(karg32.data_in_buf_ptr);
+ karg.data_out_buf_ptr = compat_ptr(karg32.data_out_buf_ptr);
+ karg.sense_data_ptr = compat_ptr(karg32.sense_data_ptr);
state = (file->f_flags & O_NONBLOCK) ? NON_BLOCKING : BLOCKING;
return _ctl_do_mpt_command(ioc, karg, &uarg->mf, state);
}
diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
index efabea1..c7ec3f1 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
@@ -52,6 +52,7 @@
#include <linux/delay.h>
#include <linux/pci.h>
#include <linux/interrupt.h>
+#include <linux/raid_class.h>
#include "mpt2sas_base.h"
@@ -133,6 +134,9 @@
void *event_data;
};
+/* raid transport support */
+static struct raid_template *mpt2sas_raid_template;
+
/**
* struct _scsi_io_transfer - scsi io transfer
* @handle: sas device handle (assigned by firmware)
@@ -1305,7 +1309,6 @@
struct MPT2SAS_DEVICE *sas_device_priv_data;
struct scsi_target *starget;
struct _raid_device *raid_device;
- struct _sas_device *sas_device;
unsigned long flags;
sas_device_priv_data = kzalloc(sizeof(struct scsi_device), GFP_KERNEL);
@@ -1332,21 +1335,8 @@
if (raid_device)
raid_device->sdev = sdev; /* raid is single lun */
spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
- } else {
- /* set TLR bit for SSP devices */
- if (!(ioc->facts.IOCCapabilities &
- MPI2_IOCFACTS_CAPABILITY_TLR))
- goto out;
- spin_lock_irqsave(&ioc->sas_device_lock, flags);
- sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc,
- sas_device_priv_data->sas_target->sas_address);
- spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
- if (sas_device && sas_device->device_info &
- MPI2_SAS_DEVICE_INFO_SSP_TARGET)
- sas_device_priv_data->flags |= MPT_DEVICE_TLR_ON;
}
- out:
return 0;
}
@@ -1419,6 +1409,140 @@
}
/**
+ * _scsih_is_raid - return boolean indicating device is raid volume
+ * @dev the device struct object
+ */
+static int
+_scsih_is_raid(struct device *dev)
+{
+ struct scsi_device *sdev = to_scsi_device(dev);
+
+ return (sdev->channel == RAID_CHANNEL) ? 1 : 0;
+}
+
+/**
+ * _scsih_get_resync - get raid volume resync percent complete
+ * @dev the device struct object
+ */
+static void
+_scsih_get_resync(struct device *dev)
+{
+ struct scsi_device *sdev = to_scsi_device(dev);
+ struct MPT2SAS_ADAPTER *ioc = shost_priv(sdev->host);
+ static struct _raid_device *raid_device;
+ unsigned long flags;
+ Mpi2RaidVolPage0_t vol_pg0;
+ Mpi2ConfigReply_t mpi_reply;
+ u32 volume_status_flags;
+ u8 percent_complete = 0;
+
+ spin_lock_irqsave(&ioc->raid_device_lock, flags);
+ raid_device = _scsih_raid_device_find_by_id(ioc, sdev->id,
+ sdev->channel);
+ spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
+
+ if (!raid_device)
+ goto out;
+
+ if (mpt2sas_config_get_raid_volume_pg0(ioc, &mpi_reply, &vol_pg0,
+ MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, raid_device->handle,
+ sizeof(Mpi2RaidVolPage0_t))) {
+ printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ goto out;
+ }
+
+ volume_status_flags = le32_to_cpu(vol_pg0.VolumeStatusFlags);
+ if (volume_status_flags & MPI2_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS)
+ percent_complete = raid_device->percent_complete;
+ out:
+ raid_set_resync(mpt2sas_raid_template, dev, percent_complete);
+}
+
+/**
+ * _scsih_get_state - get raid volume level
+ * @dev the device struct object
+ */
+static void
+_scsih_get_state(struct device *dev)
+{
+ struct scsi_device *sdev = to_scsi_device(dev);
+ struct MPT2SAS_ADAPTER *ioc = shost_priv(sdev->host);
+ static struct _raid_device *raid_device;
+ unsigned long flags;
+ Mpi2RaidVolPage0_t vol_pg0;
+ Mpi2ConfigReply_t mpi_reply;
+ u32 volstate;
+ enum raid_state state = RAID_STATE_UNKNOWN;
+
+ spin_lock_irqsave(&ioc->raid_device_lock, flags);
+ raid_device = _scsih_raid_device_find_by_id(ioc, sdev->id,
+ sdev->channel);
+ spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
+
+ if (!raid_device)
+ goto out;
+
+ if (mpt2sas_config_get_raid_volume_pg0(ioc, &mpi_reply, &vol_pg0,
+ MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, raid_device->handle,
+ sizeof(Mpi2RaidVolPage0_t))) {
+ printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ goto out;
+ }
+
+ volstate = le32_to_cpu(vol_pg0.VolumeStatusFlags);
+ if (volstate & MPI2_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS) {
+ state = RAID_STATE_RESYNCING;
+ goto out;
+ }
+
+ switch (vol_pg0.VolumeState) {
+ case MPI2_RAID_VOL_STATE_OPTIMAL:
+ case MPI2_RAID_VOL_STATE_ONLINE:
+ state = RAID_STATE_ACTIVE;
+ break;
+ case MPI2_RAID_VOL_STATE_DEGRADED:
+ state = RAID_STATE_DEGRADED;
+ break;
+ case MPI2_RAID_VOL_STATE_FAILED:
+ case MPI2_RAID_VOL_STATE_MISSING:
+ state = RAID_STATE_OFFLINE;
+ break;
+ }
+ out:
+ raid_set_state(mpt2sas_raid_template, dev, state);
+}
+
+/**
+ * _scsih_set_level - set raid level
+ * @sdev: scsi device struct
+ * @raid_device: raid_device object
+ */
+static void
+_scsih_set_level(struct scsi_device *sdev, struct _raid_device *raid_device)
+{
+ enum raid_level level = RAID_LEVEL_UNKNOWN;
+
+ switch (raid_device->volume_type) {
+ case MPI2_RAID_VOL_TYPE_RAID0:
+ level = RAID_LEVEL_0;
+ break;
+ case MPI2_RAID_VOL_TYPE_RAID10:
+ level = RAID_LEVEL_10;
+ break;
+ case MPI2_RAID_VOL_TYPE_RAID1E:
+ level = RAID_LEVEL_1E;
+ break;
+ case MPI2_RAID_VOL_TYPE_RAID1:
+ level = RAID_LEVEL_1;
+ break;
+ }
+
+ raid_set_level(mpt2sas_raid_template, &sdev->sdev_gendev, level);
+}
+
+/**
* _scsih_get_volume_capabilities - volume capabilities
* @ioc: per adapter object
* @sas_device: the raid_device object
@@ -1479,6 +1603,32 @@
}
/**
+ * _scsih_enable_tlr - setting TLR flags
+ * @ioc: per adapter object
+ * @sdev: scsi device struct
+ *
+ * Enabling Transaction Layer Retries for tape devices when
+ * vpd page 0x90 is present
+ *
+ */
+static void
+_scsih_enable_tlr(struct MPT2SAS_ADAPTER *ioc, struct scsi_device *sdev)
+{
+ /* only for TAPE */
+ if (sdev->type != TYPE_TAPE)
+ return;
+
+ if (!(ioc->facts.IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_TLR))
+ return;
+
+ sas_enable_tlr(sdev);
+ sdev_printk(KERN_INFO, sdev, "TLR %s\n",
+ sas_is_tlr_enabled(sdev) ? "Enabled" : "Disabled");
+ return;
+
+}
+
+/**
* _scsih_slave_configure - device configure routine.
* @sdev: scsi device struct
*
@@ -1574,6 +1724,8 @@
(unsigned long long)raid_device->wwid,
raid_device->num_pds, ds);
_scsih_change_queue_depth(sdev, qdepth, SCSI_QDEPTH_DEFAULT);
+ /* raid transport support */
+ _scsih_set_level(sdev, raid_device);
return 0;
}
@@ -1621,8 +1773,10 @@
_scsih_change_queue_depth(sdev, qdepth, SCSI_QDEPTH_DEFAULT);
- if (ssp_target)
+ if (ssp_target) {
sas_read_port_mode_page(sdev);
+ _scsih_enable_tlr(ioc, sdev);
+ }
return 0;
}
@@ -2908,8 +3062,9 @@
} else
mpi_control |= MPI2_SCSIIO_CONTROL_SIMPLEQ;
-
- if ((sas_device_priv_data->flags & MPT_DEVICE_TLR_ON))
+ /* Make sure Device is not raid volume */
+ if (!_scsih_is_raid(&scmd->device->sdev_gendev) &&
+ sas_is_tlr_enabled(scmd->device))
mpi_control |= MPI2_SCSIIO_CONTROL_TLR_ON;
smid = mpt2sas_base_get_smid_scsiio(ioc, ioc->scsi_io_cb_idx, scmd);
@@ -3298,10 +3453,12 @@
le32_to_cpu(mpi_reply->ResponseInfo) & 0xFF;
if (!sas_device_priv_data->tlr_snoop_check) {
sas_device_priv_data->tlr_snoop_check++;
- if ((sas_device_priv_data->flags & MPT_DEVICE_TLR_ON) &&
- response_code == MPI2_SCSITASKMGMT_RSP_INVALID_FRAME)
- sas_device_priv_data->flags &=
- ~MPT_DEVICE_TLR_ON;
+ if (!_scsih_is_raid(&scmd->device->sdev_gendev) &&
+ sas_is_tlr_enabled(scmd->device) &&
+ response_code == MPI2_SCSITASKMGMT_RSP_INVALID_FRAME) {
+ sas_disable_tlr(scmd->device);
+ sdev_printk(KERN_INFO, scmd->device, "TLR disabled\n");
+ }
}
xfer_cnt = le32_to_cpu(mpi_reply->TransferCount);
@@ -5170,11 +5327,33 @@
_scsih_sas_ir_operation_status_event(struct MPT2SAS_ADAPTER *ioc,
struct fw_event_work *fw_event)
{
+ Mpi2EventDataIrOperationStatus_t *event_data = fw_event->event_data;
+ static struct _raid_device *raid_device;
+ unsigned long flags;
+ u16 handle;
+
#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
_scsih_sas_ir_operation_status_event_debug(ioc,
- fw_event->event_data);
+ event_data);
#endif
+
+ /* code added for raid transport support */
+ if (event_data->RAIDOperation == MPI2_EVENT_IR_RAIDOP_RESYNC) {
+
+ handle = le16_to_cpu(event_data->VolDevHandle);
+
+ spin_lock_irqsave(&ioc->raid_device_lock, flags);
+ raid_device = _scsih_raid_device_find_by_handle(ioc, handle);
+ spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
+
+ if (!raid_device)
+ return;
+
+ if (event_data->RAIDOperation == MPI2_EVENT_IR_RAIDOP_RESYNC)
+ raid_device->percent_complete =
+ event_data->PercentComplete;
+ }
}
/**
@@ -5998,6 +6177,8 @@
struct _sas_port *mpt2sas_port;
struct _sas_device *sas_device;
struct _sas_node *expander_sibling;
+ struct _raid_device *raid_device, *next;
+ struct MPT2SAS_TARGET *sas_target_priv_data;
struct workqueue_struct *wq;
unsigned long flags;
@@ -6011,6 +6192,21 @@
if (wq)
destroy_workqueue(wq);
+ /* release all the volumes */
+ list_for_each_entry_safe(raid_device, next, &ioc->raid_device_list,
+ list) {
+ if (raid_device->starget) {
+ sas_target_priv_data =
+ raid_device->starget->hostdata;
+ sas_target_priv_data->deleted = 1;
+ scsi_remove_target(&raid_device->starget->dev);
+ }
+ printk(MPT2SAS_INFO_FMT "removing handle(0x%04x), wwid"
+ "(0x%016llx)\n", ioc->name, raid_device->handle,
+ (unsigned long long) raid_device->wwid);
+ _scsih_raid_device_remove(ioc, raid_device);
+ }
+
/* free ports attached to the sas_host */
retry_again:
list_for_each_entry(mpt2sas_port,
@@ -6373,6 +6569,13 @@
#endif
};
+/* raid transport support */
+static struct raid_function_template mpt2sas_raid_functions = {
+ .cookie = &scsih_driver_template,
+ .is_raid = _scsih_is_raid,
+ .get_resync = _scsih_get_resync,
+ .get_state = _scsih_get_state,
+};
/**
* _scsih_init - main entry point for this driver.
@@ -6392,6 +6595,12 @@
sas_attach_transport(&mpt2sas_transport_functions);
if (!mpt2sas_transport_template)
return -ENODEV;
+ /* raid transport support */
+ mpt2sas_raid_template = raid_class_attach(&mpt2sas_raid_functions);
+ if (!mpt2sas_raid_template) {
+ sas_release_transport(mpt2sas_transport_template);
+ return -ENODEV;
+ }
mpt2sas_base_initialize_callback_handler();
@@ -6426,8 +6635,11 @@
mpt2sas_ctl_init();
error = pci_register_driver(&scsih_driver);
- if (error)
+ if (error) {
+ /* raid transport support */
+ raid_class_release(mpt2sas_raid_template);
sas_release_transport(mpt2sas_transport_template);
+ }
return error;
}
@@ -6445,7 +6657,8 @@
pci_unregister_driver(&scsih_driver);
- sas_release_transport(mpt2sas_transport_template);
+ mpt2sas_ctl_exit();
+
mpt2sas_base_release_callback_handler(scsi_io_cb_idx);
mpt2sas_base_release_callback_handler(tm_cb_idx);
mpt2sas_base_release_callback_handler(base_cb_idx);
@@ -6457,7 +6670,10 @@
mpt2sas_base_release_callback_handler(tm_tr_cb_idx);
mpt2sas_base_release_callback_handler(tm_sas_control_cb_idx);
- mpt2sas_ctl_exit();
+ /* raid transport support */
+ raid_class_release(mpt2sas_raid_template);
+ sas_release_transport(mpt2sas_transport_template);
+
}
module_init(_scsih_init);
diff --git a/drivers/scsi/mpt2sas/mpt2sas_transport.c b/drivers/scsi/mpt2sas/mpt2sas_transport.c
index 3a82872..789f9ee 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_transport.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_transport.c
@@ -855,6 +855,17 @@
return shost_priv(shost);
}
+static struct _sas_phy *
+_transport_find_local_phy(struct MPT2SAS_ADAPTER *ioc, struct sas_phy *phy)
+{
+ int i;
+
+ for (i = 0; i < ioc->sas_hba.num_phys; i++)
+ if (ioc->sas_hba.phy[i].phy == phy)
+ return(&ioc->sas_hba.phy[i]);
+ return NULL;
+}
+
/**
* _transport_get_linkerrors -
* @phy: The sas phy object
@@ -870,14 +881,8 @@
struct _sas_phy *mpt2sas_phy;
Mpi2ConfigReply_t mpi_reply;
Mpi2SasPhyPage1_t phy_pg1;
- int i;
- for (i = 0, mpt2sas_phy = NULL; i < ioc->sas_hba.num_phys &&
- !mpt2sas_phy; i++) {
- if (ioc->sas_hba.phy[i].phy != phy)
- continue;
- mpt2sas_phy = &ioc->sas_hba.phy[i];
- }
+ mpt2sas_phy = _transport_find_local_phy(ioc, phy);
if (!mpt2sas_phy) /* this phy not on sas_host */
return -EINVAL;
@@ -971,14 +976,8 @@
struct _sas_phy *mpt2sas_phy;
Mpi2SasIoUnitControlReply_t mpi_reply;
Mpi2SasIoUnitControlRequest_t mpi_request;
- int i;
- for (i = 0, mpt2sas_phy = NULL; i < ioc->sas_hba.num_phys &&
- !mpt2sas_phy; i++) {
- if (ioc->sas_hba.phy[i].phy != phy)
- continue;
- mpt2sas_phy = &ioc->sas_hba.phy[i];
- }
+ mpt2sas_phy = _transport_find_local_phy(ioc, phy);
if (!mpt2sas_phy) /* this phy not on sas_host */
return -EINVAL;
@@ -1006,6 +1005,173 @@
}
/**
+ * _transport_phy_enable - enable/disable phys
+ * @phy: The sas phy object
+ * @enable: enable phy when true
+ *
+ * Only support sas_host direct attached phys.
+ * Returns 0 for success, non-zero for failure.
+ */
+static int
+_transport_phy_enable(struct sas_phy *phy, int enable)
+{
+ struct MPT2SAS_ADAPTER *ioc = phy_to_ioc(phy);
+ struct _sas_phy *mpt2sas_phy;
+ Mpi2SasIOUnitPage1_t *sas_iounit_pg1 = NULL;
+ Mpi2ConfigReply_t mpi_reply;
+ u16 ioc_status;
+ u16 sz;
+ int rc = 0;
+
+ mpt2sas_phy = _transport_find_local_phy(ioc, phy);
+
+ if (!mpt2sas_phy) /* this phy not on sas_host */
+ return -EINVAL;
+
+ /* sas_iounit page 1 */
+ sz = offsetof(Mpi2SasIOUnitPage1_t, PhyData) + (ioc->sas_hba.num_phys *
+ sizeof(Mpi2SasIOUnit1PhyData_t));
+ sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL);
+ if (!sas_iounit_pg1) {
+ printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ rc = -ENOMEM;
+ goto out;
+ }
+ if ((mpt2sas_config_get_sas_iounit_pg1(ioc, &mpi_reply,
+ sas_iounit_pg1, sz))) {
+ printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ rc = -ENXIO;
+ goto out;
+ }
+ ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+ MPI2_IOCSTATUS_MASK;
+ if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+ printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ rc = -EIO;
+ goto out;
+ }
+
+ if (enable)
+ sas_iounit_pg1->PhyData[mpt2sas_phy->phy_id].PhyFlags
+ &= ~MPI2_SASIOUNIT1_PHYFLAGS_PHY_DISABLE;
+ else
+ sas_iounit_pg1->PhyData[mpt2sas_phy->phy_id].PhyFlags
+ |= MPI2_SASIOUNIT1_PHYFLAGS_PHY_DISABLE;
+
+ mpt2sas_config_set_sas_iounit_pg1(ioc, &mpi_reply, sas_iounit_pg1, sz);
+
+ out:
+ kfree(sas_iounit_pg1);
+ return rc;
+}
+
+/**
+ * _transport_phy_speed - set phy min/max link rates
+ * @phy: The sas phy object
+ * @rates: rates defined in sas_phy_linkrates
+ *
+ * Only support sas_host direct attached phys.
+ * Returns 0 for success, non-zero for failure.
+ */
+static int
+_transport_phy_speed(struct sas_phy *phy, struct sas_phy_linkrates *rates)
+{
+ struct MPT2SAS_ADAPTER *ioc = phy_to_ioc(phy);
+ struct _sas_phy *mpt2sas_phy;
+ Mpi2SasIOUnitPage1_t *sas_iounit_pg1 = NULL;
+ Mpi2SasPhyPage0_t phy_pg0;
+ Mpi2ConfigReply_t mpi_reply;
+ u16 ioc_status;
+ u16 sz;
+ int i;
+ int rc = 0;
+
+ mpt2sas_phy = _transport_find_local_phy(ioc, phy);
+
+ if (!mpt2sas_phy) /* this phy not on sas_host */
+ return -EINVAL;
+
+ if (!rates->minimum_linkrate)
+ rates->minimum_linkrate = phy->minimum_linkrate;
+ else if (rates->minimum_linkrate < phy->minimum_linkrate_hw)
+ rates->minimum_linkrate = phy->minimum_linkrate_hw;
+
+ if (!rates->maximum_linkrate)
+ rates->maximum_linkrate = phy->maximum_linkrate;
+ else if (rates->maximum_linkrate > phy->maximum_linkrate_hw)
+ rates->maximum_linkrate = phy->maximum_linkrate_hw;
+
+ /* sas_iounit page 1 */
+ sz = offsetof(Mpi2SasIOUnitPage1_t, PhyData) + (ioc->sas_hba.num_phys *
+ sizeof(Mpi2SasIOUnit1PhyData_t));
+ sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL);
+ if (!sas_iounit_pg1) {
+ printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ rc = -ENOMEM;
+ goto out;
+ }
+ if ((mpt2sas_config_get_sas_iounit_pg1(ioc, &mpi_reply,
+ sas_iounit_pg1, sz))) {
+ printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ rc = -ENXIO;
+ goto out;
+ }
+ ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+ MPI2_IOCSTATUS_MASK;
+ if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+ printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ rc = -EIO;
+ goto out;
+ }
+
+ for (i = 0; i < ioc->sas_hba.num_phys; i++) {
+ if (mpt2sas_phy->phy_id != i) {
+ sas_iounit_pg1->PhyData[i].MaxMinLinkRate =
+ (ioc->sas_hba.phy[i].phy->minimum_linkrate +
+ (ioc->sas_hba.phy[i].phy->maximum_linkrate << 4));
+ } else {
+ sas_iounit_pg1->PhyData[i].MaxMinLinkRate =
+ (rates->minimum_linkrate +
+ (rates->maximum_linkrate << 4));
+ }
+ }
+
+ if (mpt2sas_config_set_sas_iounit_pg1(ioc, &mpi_reply, sas_iounit_pg1,
+ sz)) {
+ printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ rc = -ENXIO;
+ goto out;
+ }
+
+ /* link reset */
+ _transport_phy_reset(phy, 0);
+
+ /* read phy page 0, then update the rates in the sas transport phy */
+ if (!mpt2sas_config_get_phy_pg0(ioc, &mpi_reply, &phy_pg0,
+ mpt2sas_phy->phy_id)) {
+ phy->minimum_linkrate = _transport_convert_phy_link_rate(
+ phy_pg0.ProgrammedLinkRate & MPI2_SAS_PRATE_MIN_RATE_MASK);
+ phy->maximum_linkrate = _transport_convert_phy_link_rate(
+ phy_pg0.ProgrammedLinkRate >> 4);
+ phy->negotiated_linkrate = _transport_convert_phy_link_rate(
+ phy_pg0.NegotiatedLinkRate &
+ MPI2_SAS_NEG_LINK_RATE_MASK_PHYSICAL);
+ }
+
+ out:
+ kfree(sas_iounit_pg1);
+ return rc;
+}
+
+
+/**
* _transport_smp_handler - transport portal for smp passthru
* @shost: shost object
* @rphy: sas transport rphy object
@@ -1207,6 +1373,8 @@
.get_enclosure_identifier = _transport_get_enclosure_identifier,
.get_bay_identifier = _transport_get_bay_identifier,
.phy_reset = _transport_phy_reset,
+ .phy_enable = _transport_phy_enable,
+ .set_phy_speed = _transport_phy_speed,
.smp_handler = _transport_smp_handler,
};
diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c
index c2f1032..f80c1da8 100644
--- a/drivers/scsi/pm8001/pm8001_init.c
+++ b/drivers/scsi/pm8001/pm8001_init.c
@@ -654,7 +654,7 @@
}
chip = &pm8001_chips[ent->driver_data];
SHOST_TO_SAS_HA(shost) =
- kcalloc(1, sizeof(struct sas_ha_struct), GFP_KERNEL);
+ kzalloc(sizeof(struct sas_ha_struct), GFP_KERNEL);
if (!SHOST_TO_SAS_HA(shost)) {
rc = -ENOMEM;
goto err_out_free_host;
diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c
index 8371d91..49ac414 100644
--- a/drivers/scsi/qla1280.c
+++ b/drivers/scsi/qla1280.c
@@ -1640,8 +1640,10 @@
uint16_t mb[MAILBOX_REGISTER_COUNT], i;
int err;
+ spin_unlock_irq(ha->host->host_lock);
err = request_firmware(&fw, ql1280_board_tbl[ha->devnum].fwname,
&ha->pdev->dev);
+ spin_lock_irq(ha->host->host_lock);
if (err) {
printk(KERN_ERR "Failed to load image \"%s\" err %d\n",
ql1280_board_tbl[ha->devnum].fwname, err);
@@ -1699,8 +1701,10 @@
return -ENOMEM;
#endif
+ spin_unlock_irq(ha->host->host_lock);
err = request_firmware(&fw, ql1280_board_tbl[ha->devnum].fwname,
&ha->pdev->dev);
+ spin_lock_irq(ha->host->host_lock);
if (err) {
printk(KERN_ERR "Failed to load image \"%s\" err %d\n",
ql1280_board_tbl[ha->devnum].fwname, err);
diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index 3a9f5b2..90d1e06 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -11,7 +11,9 @@
#include <linux/delay.h>
static int qla24xx_vport_disable(struct fc_vport *, bool);
-
+static int qla84xx_reset(scsi_qla_host_t *, struct msg_echo_lb *, struct fc_bsg_job *);
+int qla84xx_reset_chip(scsi_qla_host_t *, uint16_t, uint16_t *);
+static int qla84xx_mgmt_cmd(scsi_qla_host_t *, struct msg_echo_lb *, struct fc_bsg_job *);
/* SYSFS attributes --------------------------------------------------------- */
static ssize_t
@@ -1168,6 +1170,28 @@
}
static ssize_t
+qla24xx_84xx_fw_version_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int rval = QLA_SUCCESS;
+ uint16_t status[2] = {0, 0};
+ scsi_qla_host_t *vha = shost_priv(class_to_shost(dev));
+ struct qla_hw_data *ha = vha->hw;
+
+ if (IS_QLA84XX(ha) && ha->cs84xx) {
+ if (ha->cs84xx->op_fw_version == 0) {
+ rval = qla84xx_verify_chip(vha, status);
+ }
+
+ if ((rval == QLA_SUCCESS) && (status[0] == 0))
+ return snprintf(buf, PAGE_SIZE, "%u\n",
+ (uint32_t)ha->cs84xx->op_fw_version);
+ }
+
+ return snprintf(buf, PAGE_SIZE, "\n");
+}
+
+static ssize_t
qla2x00_mpi_version_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
@@ -1281,6 +1305,8 @@
qla2x00_optrom_fcode_version_show, NULL);
static DEVICE_ATTR(optrom_fw_version, S_IRUGO, qla2x00_optrom_fw_version_show,
NULL);
+static DEVICE_ATTR(84xx_fw_version, S_IRUGO, qla24xx_84xx_fw_version_show,
+ NULL);
static DEVICE_ATTR(total_isp_aborts, S_IRUGO, qla2x00_total_isp_aborts_show,
NULL);
static DEVICE_ATTR(mpi_version, S_IRUGO, qla2x00_mpi_version_show, NULL);
@@ -1310,6 +1336,7 @@
&dev_attr_optrom_efi_version,
&dev_attr_optrom_fcode_version,
&dev_attr_optrom_fw_version,
+ &dev_attr_84xx_fw_version,
&dev_attr_total_isp_aborts,
&dev_attr_mpi_version,
&dev_attr_phy_version,
@@ -1504,8 +1531,6 @@
fcport->vha->hw->isp_ops->fabric_logout(fcport->vha,
fcport->loop_id, fcport->d_id.b.domain,
fcport->d_id.b.area, fcport->d_id.b.al_pa);
-
- qla2x00_abort_fcport_cmds(fcport);
}
static int
@@ -1795,6 +1820,581 @@
return 0;
}
+/* BSG support for ELS/CT pass through */
+inline srb_t *
+qla2x00_get_ctx_bsg_sp(scsi_qla_host_t *vha, fc_port_t *fcport, size_t size)
+{
+ srb_t *sp;
+ struct qla_hw_data *ha = vha->hw;
+ struct srb_bsg_ctx *ctx;
+
+ sp = mempool_alloc(ha->srb_mempool, GFP_KERNEL);
+ if (!sp)
+ goto done;
+ ctx = kzalloc(size, GFP_KERNEL);
+ if (!ctx) {
+ mempool_free(sp, ha->srb_mempool);
+ goto done;
+ }
+
+ memset(sp, 0, sizeof(*sp));
+ sp->fcport = fcport;
+ sp->ctx = ctx;
+done:
+ return sp;
+}
+
+static int
+qla2x00_process_els(struct fc_bsg_job *bsg_job)
+{
+ struct fc_rport *rport;
+ fc_port_t *fcport;
+ struct Scsi_Host *host;
+ scsi_qla_host_t *vha;
+ struct qla_hw_data *ha;
+ srb_t *sp;
+ const char *type;
+ int req_sg_cnt, rsp_sg_cnt;
+ int rval = (DRIVER_ERROR << 16);
+ uint16_t nextlid = 0;
+ struct srb_bsg *els;
+
+ /* Multiple SG's are not supported for ELS requests */
+ if (bsg_job->request_payload.sg_cnt > 1 ||
+ bsg_job->reply_payload.sg_cnt > 1) {
+ DEBUG2(printk(KERN_INFO
+ "multiple SG's are not supported for ELS requests"
+ " [request_sg_cnt: %x reply_sg_cnt: %x]\n",
+ bsg_job->request_payload.sg_cnt,
+ bsg_job->reply_payload.sg_cnt));
+ rval = -EPERM;
+ goto done;
+ }
+
+ /* ELS request for rport */
+ if (bsg_job->request->msgcode == FC_BSG_RPT_ELS) {
+ rport = bsg_job->rport;
+ fcport = *(fc_port_t **) rport->dd_data;
+ host = rport_to_shost(rport);
+ vha = shost_priv(host);
+ ha = vha->hw;
+ type = "FC_BSG_RPT_ELS";
+
+ /* make sure the rport is logged in,
+ * if not perform fabric login
+ */
+ if (qla2x00_fabric_login(vha, fcport, &nextlid)) {
+ DEBUG2(qla_printk(KERN_WARNING, ha,
+ "failed to login port %06X for ELS passthru\n",
+ fcport->d_id.b24));
+ rval = -EIO;
+ goto done;
+ }
+ } else {
+ host = bsg_job->shost;
+ vha = shost_priv(host);
+ ha = vha->hw;
+ type = "FC_BSG_HST_ELS_NOLOGIN";
+
+ /* Allocate a dummy fcport structure, since functions
+ * preparing the IOCB and mailbox command retrieves port
+ * specific information from fcport structure. For Host based
+ * ELS commands there will be no fcport structure allocated
+ */
+ fcport = qla2x00_alloc_fcport(vha, GFP_KERNEL);
+ if (!fcport) {
+ rval = -ENOMEM;
+ goto done;
+ }
+
+ /* Initialize all required fields of fcport */
+ fcport->vha = vha;
+ fcport->vp_idx = vha->vp_idx;
+ fcport->d_id.b.al_pa =
+ bsg_job->request->rqst_data.h_els.port_id[0];
+ fcport->d_id.b.area =
+ bsg_job->request->rqst_data.h_els.port_id[1];
+ fcport->d_id.b.domain =
+ bsg_job->request->rqst_data.h_els.port_id[2];
+ fcport->loop_id =
+ (fcport->d_id.b.al_pa == 0xFD) ?
+ NPH_FABRIC_CONTROLLER : NPH_F_PORT;
+ }
+
+ if (!vha->flags.online) {
+ DEBUG2(qla_printk(KERN_WARNING, ha,
+ "host not online\n"));
+ rval = -EIO;
+ goto done;
+ }
+
+ req_sg_cnt =
+ dma_map_sg(&ha->pdev->dev, bsg_job->request_payload.sg_list,
+ bsg_job->request_payload.sg_cnt, DMA_TO_DEVICE);
+ if (!req_sg_cnt) {
+ rval = -ENOMEM;
+ goto done_free_fcport;
+ }
+ rsp_sg_cnt = dma_map_sg(&ha->pdev->dev, bsg_job->reply_payload.sg_list,
+ bsg_job->reply_payload.sg_cnt, DMA_FROM_DEVICE);
+ if (!rsp_sg_cnt) {
+ rval = -ENOMEM;
+ goto done_free_fcport;
+ }
+
+ if ((req_sg_cnt != bsg_job->request_payload.sg_cnt) ||
+ (rsp_sg_cnt != bsg_job->reply_payload.sg_cnt))
+ {
+ DEBUG2(printk(KERN_INFO
+ "dma mapping resulted in different sg counts \
+ [request_sg_cnt: %x dma_request_sg_cnt: %x\
+ reply_sg_cnt: %x dma_reply_sg_cnt: %x]\n",
+ bsg_job->request_payload.sg_cnt, req_sg_cnt,
+ bsg_job->reply_payload.sg_cnt, rsp_sg_cnt));
+ rval = -EAGAIN;
+ goto done_unmap_sg;
+ }
+
+ /* Alloc SRB structure */
+ sp = qla2x00_get_ctx_bsg_sp(vha, fcport, sizeof(struct srb_bsg));
+ if (!sp) {
+ rval = -ENOMEM;
+ goto done_unmap_sg;
+ }
+
+ els = sp->ctx;
+ els->ctx.type =
+ (bsg_job->request->msgcode == FC_BSG_RPT_ELS ?
+ SRB_ELS_CMD_RPT : SRB_ELS_CMD_HST);
+ els->bsg_job = bsg_job;
+
+ DEBUG2(qla_printk(KERN_INFO, ha,
+ "scsi(%ld:%x): bsg rqst type: %s els type: %x - loop-id=%x "
+ "portid=%02x%02x%02x.\n", vha->host_no, sp->handle, type,
+ bsg_job->request->rqst_data.h_els.command_code,
+ fcport->loop_id, fcport->d_id.b.domain, fcport->d_id.b.area,
+ fcport->d_id.b.al_pa));
+
+ rval = qla2x00_start_sp(sp);
+ if (rval != QLA_SUCCESS) {
+ kfree(sp->ctx);
+ mempool_free(sp, ha->srb_mempool);
+ rval = -EIO;
+ goto done_unmap_sg;
+ }
+ return rval;
+
+done_unmap_sg:
+ dma_unmap_sg(&ha->pdev->dev, bsg_job->request_payload.sg_list,
+ bsg_job->request_payload.sg_cnt, DMA_TO_DEVICE);
+ dma_unmap_sg(&ha->pdev->dev, bsg_job->reply_payload.sg_list,
+ bsg_job->reply_payload.sg_cnt, DMA_FROM_DEVICE);
+ goto done_free_fcport;
+
+done_free_fcport:
+ if (bsg_job->request->msgcode == FC_BSG_HST_ELS_NOLOGIN)
+ kfree(fcport);
+done:
+ return rval;
+}
+
+static int
+qla2x00_process_ct(struct fc_bsg_job *bsg_job)
+{
+ srb_t *sp;
+ struct Scsi_Host *host = bsg_job->shost;
+ scsi_qla_host_t *vha = shost_priv(host);
+ struct qla_hw_data *ha = vha->hw;
+ int rval = (DRIVER_ERROR << 16);
+ int req_sg_cnt, rsp_sg_cnt;
+ uint16_t loop_id;
+ struct fc_port *fcport;
+ char *type = "FC_BSG_HST_CT";
+ struct srb_bsg *ct;
+
+ /* pass through is supported only for ISP 4Gb or higher */
+ if (!IS_FWI2_CAPABLE(ha)) {
+ DEBUG2(qla_printk(KERN_INFO, ha,
+ "scsi(%ld):Firmware is not capable to support FC "
+ "CT pass thru\n", vha->host_no));
+ rval = -EPERM;
+ goto done;
+ }
+
+ req_sg_cnt =
+ dma_map_sg(&ha->pdev->dev, bsg_job->request_payload.sg_list,
+ bsg_job->request_payload.sg_cnt, DMA_TO_DEVICE);
+ if (!req_sg_cnt) {
+ rval = -ENOMEM;
+ goto done;
+ }
+
+ rsp_sg_cnt = dma_map_sg(&ha->pdev->dev, bsg_job->reply_payload.sg_list,
+ bsg_job->reply_payload.sg_cnt, DMA_FROM_DEVICE);
+ if (!rsp_sg_cnt) {
+ rval = -ENOMEM;
+ goto done;
+ }
+
+ if ((req_sg_cnt != bsg_job->request_payload.sg_cnt) ||
+ (rsp_sg_cnt != bsg_job->reply_payload.sg_cnt))
+ {
+ DEBUG2(qla_printk(KERN_WARNING, ha,
+ "dma mapping resulted in different sg counts \
+ [request_sg_cnt: %x dma_request_sg_cnt: %x\
+ reply_sg_cnt: %x dma_reply_sg_cnt: %x]\n",
+ bsg_job->request_payload.sg_cnt, req_sg_cnt,
+ bsg_job->reply_payload.sg_cnt, rsp_sg_cnt));
+ rval = -EAGAIN;
+ goto done_unmap_sg;
+ }
+
+ if (!vha->flags.online) {
+ DEBUG2(qla_printk(KERN_WARNING, ha,
+ "host not online\n"));
+ rval = -EIO;
+ goto done_unmap_sg;
+ }
+
+ loop_id =
+ (bsg_job->request->rqst_data.h_ct.preamble_word1 & 0xFF000000)
+ >> 24;
+ switch (loop_id) {
+ case 0xFC:
+ loop_id = cpu_to_le16(NPH_SNS);
+ break;
+ case 0xFA:
+ loop_id = vha->mgmt_svr_loop_id;
+ break;
+ default:
+ DEBUG2(qla_printk(KERN_INFO, ha,
+ "Unknown loop id: %x\n", loop_id));
+ rval = -EINVAL;
+ goto done_unmap_sg;
+ }
+
+ /* Allocate a dummy fcport structure, since functions preparing the
+ * IOCB and mailbox command retrieves port specific information
+ * from fcport structure. For Host based ELS commands there will be
+ * no fcport structure allocated
+ */
+ fcport = qla2x00_alloc_fcport(vha, GFP_KERNEL);
+ if (!fcport)
+ {
+ rval = -ENOMEM;
+ goto done_unmap_sg;
+ }
+
+ /* Initialize all required fields of fcport */
+ fcport->vha = vha;
+ fcport->vp_idx = vha->vp_idx;
+ fcport->d_id.b.al_pa = bsg_job->request->rqst_data.h_ct.port_id[0];
+ fcport->d_id.b.area = bsg_job->request->rqst_data.h_ct.port_id[1];
+ fcport->d_id.b.domain = bsg_job->request->rqst_data.h_ct.port_id[2];
+ fcport->loop_id = loop_id;
+
+ /* Alloc SRB structure */
+ sp = qla2x00_get_ctx_bsg_sp(vha, fcport, sizeof(struct srb_bsg));
+ if (!sp) {
+ rval = -ENOMEM;
+ goto done_free_fcport;
+ }
+
+ ct = sp->ctx;
+ ct->ctx.type = SRB_CT_CMD;
+ ct->bsg_job = bsg_job;
+
+ DEBUG2(qla_printk(KERN_INFO, ha,
+ "scsi(%ld:%x): bsg rqst type: %s els type: %x - loop-id=%x "
+ "portid=%02x%02x%02x.\n", vha->host_no, sp->handle, type,
+ (bsg_job->request->rqst_data.h_ct.preamble_word2 >> 16),
+ fcport->loop_id, fcport->d_id.b.domain, fcport->d_id.b.area,
+ fcport->d_id.b.al_pa));
+
+ rval = qla2x00_start_sp(sp);
+ if (rval != QLA_SUCCESS) {
+ kfree(sp->ctx);
+ mempool_free(sp, ha->srb_mempool);
+ rval = -EIO;
+ goto done_free_fcport;
+ }
+ return rval;
+
+done_free_fcport:
+ kfree(fcport);
+done_unmap_sg:
+ dma_unmap_sg(&ha->pdev->dev, bsg_job->request_payload.sg_list,
+ bsg_job->request_payload.sg_cnt, DMA_TO_DEVICE);
+ dma_unmap_sg(&ha->pdev->dev, bsg_job->reply_payload.sg_list,
+ bsg_job->reply_payload.sg_cnt, DMA_FROM_DEVICE);
+done:
+ return rval;
+}
+
+static int
+qla2x00_process_vendor_specific(struct fc_bsg_job *bsg_job)
+{
+ struct Scsi_Host *host = bsg_job->shost;
+ scsi_qla_host_t *vha = shost_priv(host);
+ struct qla_hw_data *ha = vha->hw;
+ int rval;
+ uint8_t command_sent;
+ uint32_t vendor_cmd;
+ char *type;
+ struct msg_echo_lb elreq;
+ uint16_t response[MAILBOX_REGISTER_COUNT];
+ uint8_t* fw_sts_ptr;
+ uint8_t *req_data;
+ dma_addr_t req_data_dma;
+ uint32_t req_data_len;
+ uint8_t *rsp_data;
+ dma_addr_t rsp_data_dma;
+ uint32_t rsp_data_len;
+
+ if (test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) ||
+ test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) ||
+ test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) {
+ rval = -EBUSY;
+ goto done;
+ }
+
+ if (!vha->flags.online) {
+ DEBUG2(qla_printk(KERN_WARNING, ha,
+ "host not online\n"));
+ rval = -EIO;
+ goto done;
+ }
+
+ elreq.req_sg_cnt =
+ dma_map_sg(&ha->pdev->dev, bsg_job->request_payload.sg_list,
+ bsg_job->request_payload.sg_cnt, DMA_TO_DEVICE);
+ if (!elreq.req_sg_cnt) {
+ rval = -ENOMEM;
+ goto done;
+ }
+ elreq.rsp_sg_cnt =
+ dma_map_sg(&ha->pdev->dev, bsg_job->reply_payload.sg_list,
+ bsg_job->reply_payload.sg_cnt, DMA_FROM_DEVICE);
+ if (!elreq.rsp_sg_cnt) {
+ rval = -ENOMEM;
+ goto done;
+ }
+
+ if ((elreq.req_sg_cnt != bsg_job->request_payload.sg_cnt) ||
+ (elreq.rsp_sg_cnt != bsg_job->reply_payload.sg_cnt))
+ {
+ DEBUG2(printk(KERN_INFO
+ "dma mapping resulted in different sg counts \
+ [request_sg_cnt: %x dma_request_sg_cnt: %x\
+ reply_sg_cnt: %x dma_reply_sg_cnt: %x]\n",
+ bsg_job->request_payload.sg_cnt, elreq.req_sg_cnt,
+ bsg_job->reply_payload.sg_cnt, elreq.rsp_sg_cnt));
+ rval = -EAGAIN;
+ goto done_unmap_sg;
+ }
+ req_data_len = rsp_data_len = bsg_job->request_payload.payload_len;
+ req_data = dma_alloc_coherent(&ha->pdev->dev, req_data_len,
+ &req_data_dma, GFP_KERNEL);
+
+ rsp_data = dma_alloc_coherent(&ha->pdev->dev, rsp_data_len,
+ &rsp_data_dma, GFP_KERNEL);
+
+ /* Copy the request buffer in req_data now */
+ sg_copy_to_buffer(bsg_job->request_payload.sg_list,
+ bsg_job->request_payload.sg_cnt, req_data,
+ req_data_len);
+
+ elreq.send_dma = req_data_dma;
+ elreq.rcv_dma = rsp_data_dma;
+ elreq.transfer_size = req_data_len;
+
+ /* Vendor cmd : loopback or ECHO diagnostic
+ * Options:
+ * Loopback : Either internal or external loopback
+ * ECHO: ECHO ELS or Vendor specific FC4 link data
+ */
+ vendor_cmd = bsg_job->request->rqst_data.h_vendor.vendor_cmd[0];
+ elreq.options =
+ *(((uint32_t *)bsg_job->request->rqst_data.h_vendor.vendor_cmd)
+ + 1);
+
+ switch (bsg_job->request->rqst_data.h_vendor.vendor_cmd[0]) {
+ case QL_VND_LOOPBACK:
+ if (ha->current_topology != ISP_CFG_F) {
+ type = "FC_BSG_HST_VENDOR_LOOPBACK";
+
+ DEBUG2(qla_printk(KERN_INFO, ha,
+ "scsi(%ld) bsg rqst type: %s vendor rqst type: %x options: %x.\n",
+ vha->host_no, type, vendor_cmd, elreq.options));
+
+ command_sent = INT_DEF_LB_LOOPBACK_CMD;
+ rval = qla2x00_loopback_test(vha, &elreq, response);
+ if (IS_QLA81XX(ha)) {
+ if (response[0] == MBS_COMMAND_ERROR && response[1] == MBS_LB_RESET) {
+ DEBUG2(printk(KERN_ERR "%s(%ld): ABORTing "
+ "ISP\n", __func__, vha->host_no));
+ set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
+ qla2xxx_wake_dpc(vha);
+ }
+ }
+ } else {
+ type = "FC_BSG_HST_VENDOR_ECHO_DIAG";
+ DEBUG2(qla_printk(KERN_INFO, ha,
+ "scsi(%ld) bsg rqst type: %s vendor rqst type: %x options: %x.\n",
+ vha->host_no, type, vendor_cmd, elreq.options));
+
+ command_sent = INT_DEF_LB_ECHO_CMD;
+ rval = qla2x00_echo_test(vha, &elreq, response);
+ }
+ break;
+ case QLA84_RESET:
+ if (!IS_QLA84XX(vha->hw)) {
+ rval = -EINVAL;
+ DEBUG16(printk(
+ "%s(%ld): 8xxx exiting.\n",
+ __func__, vha->host_no));
+ return rval;
+ }
+ rval = qla84xx_reset(vha, &elreq, bsg_job);
+ break;
+ case QLA84_MGMT_CMD:
+ if (!IS_QLA84XX(vha->hw)) {
+ rval = -EINVAL;
+ DEBUG16(printk(
+ "%s(%ld): 8xxx exiting.\n",
+ __func__, vha->host_no));
+ return rval;
+ }
+ rval = qla84xx_mgmt_cmd(vha, &elreq, bsg_job);
+ break;
+ default:
+ rval = -ENOSYS;
+ }
+
+ if (rval != QLA_SUCCESS) {
+ DEBUG2(qla_printk(KERN_WARNING, ha,
+ "scsi(%ld) Vendor request %s failed\n", vha->host_no, type));
+ rval = 0;
+ bsg_job->reply->result = (DID_ERROR << 16);
+ bsg_job->reply->reply_payload_rcv_len = 0;
+ fw_sts_ptr = ((uint8_t*)bsg_job->req->sense) + sizeof(struct fc_bsg_reply);
+ memcpy( fw_sts_ptr, response, sizeof(response));
+ fw_sts_ptr += sizeof(response);
+ *fw_sts_ptr = command_sent;
+ } else {
+ DEBUG2(qla_printk(KERN_WARNING, ha,
+ "scsi(%ld) Vendor request %s completed\n", vha->host_no, type));
+ rval = bsg_job->reply->result = 0;
+ bsg_job->reply_len = sizeof(struct fc_bsg_reply) + sizeof(response) + sizeof(uint8_t);
+ bsg_job->reply->reply_payload_rcv_len = bsg_job->reply_payload.payload_len;
+ fw_sts_ptr = ((uint8_t*)bsg_job->req->sense) + sizeof(struct fc_bsg_reply);
+ memcpy(fw_sts_ptr, response, sizeof(response));
+ fw_sts_ptr += sizeof(response);
+ *fw_sts_ptr = command_sent;
+ sg_copy_from_buffer(bsg_job->reply_payload.sg_list,
+ bsg_job->reply_payload.sg_cnt, rsp_data,
+ rsp_data_len);
+ }
+ bsg_job->job_done(bsg_job);
+
+done_unmap_sg:
+
+ if(req_data)
+ dma_free_coherent(&ha->pdev->dev, req_data_len,
+ req_data, req_data_dma);
+ dma_unmap_sg(&ha->pdev->dev,
+ bsg_job->request_payload.sg_list,
+ bsg_job->request_payload.sg_cnt, DMA_TO_DEVICE);
+ dma_unmap_sg(&ha->pdev->dev,
+ bsg_job->reply_payload.sg_list,
+ bsg_job->reply_payload.sg_cnt, DMA_FROM_DEVICE);
+
+done:
+ return rval;
+}
+
+static int
+qla24xx_bsg_request(struct fc_bsg_job *bsg_job)
+{
+ int ret = -EINVAL;
+
+ switch (bsg_job->request->msgcode) {
+ case FC_BSG_RPT_ELS:
+ case FC_BSG_HST_ELS_NOLOGIN:
+ ret = qla2x00_process_els(bsg_job);
+ break;
+ case FC_BSG_HST_CT:
+ ret = qla2x00_process_ct(bsg_job);
+ break;
+ case FC_BSG_HST_VENDOR:
+ ret = qla2x00_process_vendor_specific(bsg_job);
+ break;
+ case FC_BSG_HST_ADD_RPORT:
+ case FC_BSG_HST_DEL_RPORT:
+ case FC_BSG_RPT_CT:
+ default:
+ DEBUG2(printk("qla2xxx: unsupported BSG request\n"));
+ break;
+ }
+ return ret;
+}
+
+static int
+qla24xx_bsg_timeout(struct fc_bsg_job *bsg_job)
+{
+ scsi_qla_host_t *vha = shost_priv(bsg_job->shost);
+ struct qla_hw_data *ha = vha->hw;
+ srb_t *sp;
+ int cnt, que;
+ unsigned long flags;
+ struct req_que *req;
+ struct srb_bsg *sp_bsg;
+
+ /* find the bsg job from the active list of commands */
+ spin_lock_irqsave(&ha->hardware_lock, flags);
+ for (que = 0; que < ha->max_req_queues; que++) {
+ req = ha->req_q_map[que];
+ if (!req)
+ continue;
+
+ for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++ ) {
+ sp = req->outstanding_cmds[cnt];
+
+ if (sp) {
+ sp_bsg = (struct srb_bsg*)sp->ctx;
+
+ if (((sp_bsg->ctx.type == SRB_CT_CMD) ||
+ (sp_bsg->ctx.type == SRB_ELS_CMD_RPT)
+ || ( sp_bsg->ctx.type == SRB_ELS_CMD_HST)) &&
+ (sp_bsg->bsg_job == bsg_job)) {
+ if (ha->isp_ops->abort_command(sp)) {
+ DEBUG2(qla_printk(KERN_INFO, ha,
+ "scsi(%ld): mbx abort_command failed\n", vha->host_no));
+ bsg_job->req->errors = bsg_job->reply->result = -EIO;
+ } else {
+ DEBUG2(qla_printk(KERN_INFO, ha,
+ "scsi(%ld): mbx abort_command success\n", vha->host_no));
+ bsg_job->req->errors = bsg_job->reply->result = 0;
+ }
+ goto done;
+ }
+ }
+ }
+ }
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
+ DEBUG2(qla_printk(KERN_INFO, ha,
+ "scsi(%ld) SRB not found to abort\n", vha->host_no));
+ bsg_job->req->errors = bsg_job->reply->result = -ENXIO;
+ return 0;
+
+done:
+ if (bsg_job->request->msgcode == FC_BSG_HST_CT)
+ kfree(sp->fcport);
+ kfree(sp->ctx);
+ mempool_free(sp, ha->srb_mempool);
+ return 0;
+}
+
struct fc_function_template qla2xxx_transport_functions = {
.show_host_node_name = 1,
@@ -1838,6 +2438,8 @@
.vport_create = qla24xx_vport_create,
.vport_disable = qla24xx_vport_disable,
.vport_delete = qla24xx_vport_delete,
+ .bsg_request = qla24xx_bsg_request,
+ .bsg_timeout = qla24xx_bsg_timeout,
};
struct fc_function_template qla2xxx_transport_vport_functions = {
@@ -1878,6 +2480,8 @@
.dev_loss_tmo_callbk = qla2x00_dev_loss_tmo_callbk,
.terminate_rport_io = qla2x00_terminate_rport_io,
.get_fc_host_stats = qla2x00_get_fc_host_stats,
+ .bsg_request = qla24xx_bsg_request,
+ .bsg_timeout = qla24xx_bsg_timeout,
};
void
@@ -1906,3 +2510,125 @@
speed = FC_PORTSPEED_1GBIT;
fc_host_supported_speeds(vha->host) = speed;
}
+static int
+qla84xx_reset(scsi_qla_host_t *ha, struct msg_echo_lb *mreq, struct fc_bsg_job *bsg_job)
+{
+ int ret = 0;
+ int cmd;
+ uint16_t cmd_status;
+
+ DEBUG16(printk("%s(%ld): entered.\n", __func__, ha->host_no));
+
+ cmd = (*((bsg_job->request->rqst_data.h_vendor.vendor_cmd) + 2))
+ == A84_RESET_FLAG_ENABLE_DIAG_FW ?
+ A84_ISSUE_RESET_DIAG_FW : A84_ISSUE_RESET_OP_FW;
+ ret = qla84xx_reset_chip(ha, cmd == A84_ISSUE_RESET_DIAG_FW,
+ &cmd_status);
+ return ret;
+}
+
+static int
+qla84xx_mgmt_cmd(scsi_qla_host_t *ha, struct msg_echo_lb *mreq, struct fc_bsg_job *bsg_job)
+{
+ struct access_chip_84xx *mn;
+ dma_addr_t mn_dma, mgmt_dma;
+ void *mgmt_b = NULL;
+ int ret = 0;
+ int rsp_hdr_len, len = 0;
+ struct qla84_msg_mgmt *ql84_mgmt;
+
+ ql84_mgmt = (struct qla84_msg_mgmt *) vmalloc(sizeof(struct qla84_msg_mgmt));
+ ql84_mgmt->cmd =
+ *((uint16_t *)(bsg_job->request->rqst_data.h_vendor.vendor_cmd + 2));
+ ql84_mgmt->mgmtp.u.mem.start_addr =
+ *((uint32_t *)(bsg_job->request->rqst_data.h_vendor.vendor_cmd + 3));
+ ql84_mgmt->len =
+ *((uint32_t *)(bsg_job->request->rqst_data.h_vendor.vendor_cmd + 4));
+ ql84_mgmt->mgmtp.u.config.id =
+ *((uint32_t *)(bsg_job->request->rqst_data.h_vendor.vendor_cmd + 5));
+ ql84_mgmt->mgmtp.u.config.param0 =
+ *((uint32_t *)(bsg_job->request->rqst_data.h_vendor.vendor_cmd + 6));
+ ql84_mgmt->mgmtp.u.config.param1 =
+ *((uint32_t *)(bsg_job->request->rqst_data.h_vendor.vendor_cmd + 7));
+ ql84_mgmt->mgmtp.u.info.type =
+ *((uint32_t *)(bsg_job->request->rqst_data.h_vendor.vendor_cmd + 8));
+ ql84_mgmt->mgmtp.u.info.context =
+ *((uint32_t *)(bsg_job->request->rqst_data.h_vendor.vendor_cmd + 9));
+
+ rsp_hdr_len = bsg_job->request_payload.payload_len;
+
+ mn = dma_pool_alloc(ha->hw->s_dma_pool, GFP_KERNEL, &mn_dma);
+ if (mn == NULL) {
+ DEBUG2(printk(KERN_ERR "%s: dma alloc for fw buffer "
+ "failed%lu\n", __func__, ha->host_no));
+ return -ENOMEM;
+ }
+
+ memset(mn, 0, sizeof (struct access_chip_84xx));
+
+ mn->entry_type = ACCESS_CHIP_IOCB_TYPE;
+ mn->entry_count = 1;
+
+ switch (ql84_mgmt->cmd) {
+ case QLA84_MGMT_READ_MEM:
+ mn->options = cpu_to_le16(ACO_DUMP_MEMORY);
+ mn->parameter1 = cpu_to_le32(ql84_mgmt->mgmtp.u.mem.start_addr);
+ break;
+ case QLA84_MGMT_WRITE_MEM:
+ mn->options = cpu_to_le16(ACO_LOAD_MEMORY);
+ mn->parameter1 = cpu_to_le32(ql84_mgmt->mgmtp.u.mem.start_addr);
+ break;
+ case QLA84_MGMT_CHNG_CONFIG:
+ mn->options = cpu_to_le16(ACO_CHANGE_CONFIG_PARAM);
+ mn->parameter1 = cpu_to_le32(ql84_mgmt->mgmtp.u.config.id);
+ mn->parameter2 = cpu_to_le32(ql84_mgmt->mgmtp.u.config.param0);
+ mn->parameter3 = cpu_to_le32(ql84_mgmt->mgmtp.u.config.param1);
+ break;
+ case QLA84_MGMT_GET_INFO:
+ mn->options = cpu_to_le16(ACO_REQUEST_INFO);
+ mn->parameter1 = cpu_to_le32(ql84_mgmt->mgmtp.u.info.type);
+ mn->parameter2 = cpu_to_le32(ql84_mgmt->mgmtp.u.info.context);
+ break;
+ default:
+ ret = -EIO;
+ goto exit_mgmt0;
+ }
+
+ if ((len == ql84_mgmt->len) &&
+ ql84_mgmt->cmd != QLA84_MGMT_CHNG_CONFIG) {
+ mgmt_b = dma_alloc_coherent(&ha->hw->pdev->dev, len,
+ &mgmt_dma, GFP_KERNEL);
+ if (mgmt_b == NULL) {
+ DEBUG2(printk(KERN_ERR "%s: dma alloc mgmt_b "
+ "failed%lu\n", __func__, ha->host_no));
+ ret = -ENOMEM;
+ goto exit_mgmt0;
+ }
+ mn->total_byte_cnt = cpu_to_le32(ql84_mgmt->len);
+ mn->dseg_count = cpu_to_le16(1);
+ mn->dseg_address[0] = cpu_to_le32(LSD(mgmt_dma));
+ mn->dseg_address[1] = cpu_to_le32(MSD(mgmt_dma));
+ mn->dseg_length = cpu_to_le32(len);
+
+ if (ql84_mgmt->cmd == QLA84_MGMT_WRITE_MEM) {
+ memcpy(mgmt_b, ql84_mgmt->payload, len);
+ }
+ }
+
+ ret = qla2x00_issue_iocb(ha, mn, mn_dma, 0);
+ if ((ret != QLA_SUCCESS) || (ql84_mgmt->cmd == QLA84_MGMT_WRITE_MEM)
+ || (ql84_mgmt->cmd == QLA84_MGMT_CHNG_CONFIG)) {
+ if (ret != QLA_SUCCESS)
+ DEBUG2(printk(KERN_ERR "%s(%lu): failed\n",
+ __func__, ha->host_no));
+ } else if ((ql84_mgmt->cmd == QLA84_MGMT_READ_MEM) ||
+ (ql84_mgmt->cmd == QLA84_MGMT_GET_INFO)) {
+ }
+
+ if (mgmt_b)
+ dma_free_coherent(&ha->hw->pdev->dev, len, mgmt_b, mgmt_dma);
+
+exit_mgmt0:
+ dma_pool_free(ha->hw->s_dma_pool, mn, mn_dma);
+ return ret;
+}
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index 1263d97..afa9561 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -31,6 +31,7 @@
#include <scsi/scsi_device.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_transport_fc.h>
+#include <scsi/scsi_bsg_fc.h>
#define QLA2XXX_DRIVER_NAME "qla2xxx"
@@ -228,6 +229,27 @@
uint16_t flags;
};
+struct srb_bsg_ctx {
+#define SRB_ELS_CMD_RPT 3
+#define SRB_ELS_CMD_HST 4
+#define SRB_CT_CMD 5
+ uint16_t type;
+};
+
+struct srb_bsg {
+ struct srb_bsg_ctx ctx;
+ struct fc_bsg_job *bsg_job;
+};
+
+struct msg_echo_lb {
+ dma_addr_t send_dma;
+ dma_addr_t rcv_dma;
+ uint16_t req_sg_cnt;
+ uint16_t rsp_sg_cnt;
+ uint16_t options;
+ uint32_t transfer_size;
+};
+
/*
* ISP I/O Register Set structure definitions.
*/
@@ -522,6 +544,8 @@
#define MBA_DISCARD_RND_FRAME 0x8048 /* discard RND frame due to error. */
#define MBA_REJECTED_FCP_CMD 0x8049 /* rejected FCP_CMD. */
+/* ISP mailbox loopback echo diagnostic error code */
+#define MBS_LB_RESET 0x17
/*
* Firmware options 1, 2, 3.
*/
@@ -2230,6 +2254,13 @@
int max_q_depth;
};
+/* Place holder for FW buffer parameters */
+struct qlfc_fw {
+ void *fw_buf;
+ dma_addr_t fw_dma;
+ uint32_t len;
+};
+
/*
* Qlogic host adapter specific data structure.
*/
@@ -2594,6 +2625,7 @@
struct qla_statistics qla_stats;
struct isp_operations *isp_ops;
struct workqueue_struct *wq;
+ struct qlfc_fw fw_buf;
};
/*
@@ -2766,4 +2798,127 @@
#define CMD_SP(Cmnd) ((Cmnd)->SCp.ptr)
+/*
+ * BSG Vendor specific commands
+ */
+
+#define QL_VND_LOOPBACK 0x01
+#define QLA84_RESET 0x02
+#define QLA84_UPDATE_FW 0x03
+#define QLA84_MGMT_CMD 0x04
+
+/* BSG definations for interpreting CommandSent field */
+#define INT_DEF_LB_LOOPBACK_CMD 0
+#define INT_DEF_LB_ECHO_CMD 1
+
+/* BSG Vendor specific definations */
+typedef struct _A84_RESET {
+ uint16_t Flags;
+ uint16_t Reserved;
+#define A84_RESET_FLAG_ENABLE_DIAG_FW 1
+} __attribute__((packed)) A84_RESET, *PA84_RESET;
+
+#define A84_ISSUE_WRITE_TYPE_CMD 0
+#define A84_ISSUE_READ_TYPE_CMD 1
+#define A84_CLEANUP_CMD 2
+#define A84_ISSUE_RESET_OP_FW 3
+#define A84_ISSUE_RESET_DIAG_FW 4
+#define A84_ISSUE_UPDATE_OPFW_CMD 5
+#define A84_ISSUE_UPDATE_DIAGFW_CMD 6
+
+struct qla84_mgmt_param {
+ union {
+ struct {
+ uint32_t start_addr;
+ } mem; /* for QLA84_MGMT_READ/WRITE_MEM */
+ struct {
+ uint32_t id;
+#define QLA84_MGMT_CONFIG_ID_UIF 1
+#define QLA84_MGMT_CONFIG_ID_FCOE_COS 2
+#define QLA84_MGMT_CONFIG_ID_PAUSE 3
+#define QLA84_MGMT_CONFIG_ID_TIMEOUTS 4
+
+ uint32_t param0;
+ uint32_t param1;
+ } config; /* for QLA84_MGMT_CHNG_CONFIG */
+
+ struct {
+ uint32_t type;
+#define QLA84_MGMT_INFO_CONFIG_LOG_DATA 1 /* Get Config Log Data */
+#define QLA84_MGMT_INFO_LOG_DATA 2 /* Get Log Data */
+#define QLA84_MGMT_INFO_PORT_STAT 3 /* Get Port Statistics */
+#define QLA84_MGMT_INFO_LIF_STAT 4 /* Get LIF Statistics */
+#define QLA84_MGMT_INFO_ASIC_STAT 5 /* Get ASIC Statistics */
+#define QLA84_MGMT_INFO_CONFIG_PARAMS 6 /* Get Config Parameters */
+#define QLA84_MGMT_INFO_PANIC_LOG 7 /* Get Panic Log */
+
+ uint32_t context;
+/*
+* context definitions for QLA84_MGMT_INFO_CONFIG_LOG_DATA
+*/
+#define IC_LOG_DATA_LOG_ID_DEBUG_LOG 0
+#define IC_LOG_DATA_LOG_ID_LEARN_LOG 1
+#define IC_LOG_DATA_LOG_ID_FC_ACL_INGRESS_LOG 2
+#define IC_LOG_DATA_LOG_ID_FC_ACL_EGRESS_LOG 3
+#define IC_LOG_DATA_LOG_ID_ETHERNET_ACL_INGRESS_LOG 4
+#define IC_LOG_DATA_LOG_ID_ETHERNET_ACL_EGRESS_LOG 5
+#define IC_LOG_DATA_LOG_ID_MESSAGE_TRANSMIT_LOG 6
+#define IC_LOG_DATA_LOG_ID_MESSAGE_RECEIVE_LOG 7
+#define IC_LOG_DATA_LOG_ID_LINK_EVENT_LOG 8
+#define IC_LOG_DATA_LOG_ID_DCX_LOG 9
+
+/*
+* context definitions for QLA84_MGMT_INFO_PORT_STAT
+*/
+#define IC_PORT_STATISTICS_PORT_NUMBER_ETHERNET_PORT0 0
+#define IC_PORT_STATISTICS_PORT_NUMBER_ETHERNET_PORT1 1
+#define IC_PORT_STATISTICS_PORT_NUMBER_NSL_PORT0 2
+#define IC_PORT_STATISTICS_PORT_NUMBER_NSL_PORT1 3
+#define IC_PORT_STATISTICS_PORT_NUMBER_FC_PORT0 4
+#define IC_PORT_STATISTICS_PORT_NUMBER_FC_PORT1 5
+
+
+/*
+* context definitions for QLA84_MGMT_INFO_LIF_STAT
+*/
+#define IC_LIF_STATISTICS_LIF_NUMBER_ETHERNET_PORT0 0
+#define IC_LIF_STATISTICS_LIF_NUMBER_ETHERNET_PORT1 1
+#define IC_LIF_STATISTICS_LIF_NUMBER_FC_PORT0 2
+#define IC_LIF_STATISTICS_LIF_NUMBER_FC_PORT1 3
+#define IC_LIF_STATISTICS_LIF_NUMBER_CPU 6
+
+ } info; /* for QLA84_MGMT_GET_INFO */
+ } u;
+};
+
+struct qla84_msg_mgmt {
+ uint16_t cmd;
+#define QLA84_MGMT_READ_MEM 0x00
+#define QLA84_MGMT_WRITE_MEM 0x01
+#define QLA84_MGMT_CHNG_CONFIG 0x02
+#define QLA84_MGMT_GET_INFO 0x03
+ uint16_t rsrvd;
+ struct qla84_mgmt_param mgmtp;/* parameters for cmd */
+ uint32_t len; /* bytes in payload following this struct */
+ uint8_t payload[0]; /* payload for cmd */
+};
+
+struct msg_update_fw {
+ /*
+ * diag_fw = 0 operational fw
+ * otherwise diagnostic fw
+ * offset, len, fw_len are present to overcome the current limitation
+ * of 128Kb xfer size. The fw is sent in smaller chunks. Each chunk
+ * specifies the byte "offset" where it fits in the fw buffer. The
+ * number of bytes in each chunk is specified in "len". "fw_len"
+ * is the total size of fw. The first chunk should start at offset = 0.
+ * When offset+len == fw_len, the fw is written to the HBA.
+ */
+ uint32_t diag_fw;
+ uint32_t offset;/* start offset */
+ uint32_t len; /* num bytes in cur xfer */
+ uint32_t fw_len; /* size of fw in bytes */
+ uint8_t fw_bytes[0];
+};
+
#endif
diff --git a/drivers/scsi/qla2xxx/qla_fw.h b/drivers/scsi/qla2xxx/qla_fw.h
index 66a8da5..cebf4f1 100644
--- a/drivers/scsi/qla2xxx/qla_fw.h
+++ b/drivers/scsi/qla2xxx/qla_fw.h
@@ -627,6 +627,39 @@
uint32_t rx_len; /* Data segment 1 length. */
};
+struct els_sts_entry_24xx {
+ uint8_t entry_type; /* Entry type. */
+ uint8_t entry_count; /* Entry count. */
+ uint8_t sys_define; /* System Defined. */
+ uint8_t entry_status; /* Entry Status. */
+
+ uint32_t handle; /* System handle. */
+
+ uint16_t comp_status;
+
+ uint16_t nport_handle; /* N_PORT handle. */
+
+ uint16_t reserved_1;
+
+ uint8_t vp_index;
+ uint8_t sof_type;
+
+ uint32_t rx_xchg_address; /* Receive exchange address. */
+ uint16_t reserved_2;
+
+ uint8_t opcode;
+ uint8_t reserved_3;
+
+ uint8_t port_id[3];
+ uint8_t reserved_4;
+
+ uint16_t reserved_5;
+
+ uint16_t control_flags; /* Control flags. */
+ uint32_t total_byte_count;
+ uint32_t error_subcode_1;
+ uint32_t error_subcode_2;
+};
/*
* ISP queue - Mailbox Command entry structure definition.
*/
diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index 8bc6f53..3a89bc5 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -60,6 +60,8 @@
extern int qla2x00_async_logout_done(struct scsi_qla_host *, fc_port_t *,
uint16_t *);
+extern fc_port_t *
+qla2x00_alloc_fcport(scsi_qla_host_t *, gfp_t );
/*
* Global Data in qla_os.c source file.
*/
@@ -76,6 +78,7 @@
extern int ql2xmaxqueues;
extern int ql2xmultique_tag;
extern int ql2xfwloadbin;
+extern int ql2xetsenable;
extern int qla2x00_loop_reset(scsi_qla_host_t *);
extern void qla2x00_abort_all_cmds(scsi_qla_host_t *, int);
@@ -94,7 +97,6 @@
extern int qla81xx_restart_mpi_firmware(scsi_qla_host_t *);
-extern void qla2x00_abort_fcport_cmds(fc_port_t *);
extern struct scsi_qla_host *qla2x00_create_host(struct scsi_host_template *,
struct qla_hw_data *);
extern void qla2x00_free_host(struct scsi_qla_host *);
@@ -154,6 +156,7 @@
int __qla2x00_marker(struct scsi_qla_host *, struct req_que *, struct rsp_que *,
uint16_t, uint16_t, uint8_t);
extern int qla2x00_start_sp(srb_t *);
+extern void qla2x00_ctx_sp_free(srb_t *);
/*
* Global Function Prototypes in qla_mbx.c source file.
@@ -426,6 +429,8 @@
extern void qla2x00_init_host_attr(scsi_qla_host_t *);
extern void qla2x00_alloc_sysfs_attr(scsi_qla_host_t *);
extern void qla2x00_free_sysfs_attr(scsi_qla_host_t *);
+extern int qla2x00_loopback_test(scsi_qla_host_t *, struct msg_echo_lb *, uint16_t *);
+extern int qla2x00_echo_test(scsi_qla_host_t *, struct msg_echo_lb *, uint16_t *);
/*
* Global Function Prototypes in qla_dfs.c source file.
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 3f8e849..a67b2ba 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -62,7 +62,7 @@
ctx->free(sp);
}
-static void
+void
qla2x00_ctx_sp_free(srb_t *sp)
{
struct srb_ctx *ctx = sp->ctx;
@@ -338,6 +338,16 @@
rval = qla2x00_init_rings(vha);
ha->flags.chip_reset_done = 1;
+ if (rval == QLA_SUCCESS && IS_QLA84XX(ha)) {
+ /* Issue verify 84xx FW IOCB to complete 84xx initialization */
+ rval = qla84xx_init_chip(vha);
+ if (rval != QLA_SUCCESS) {
+ qla_printk(KERN_ERR, ha,
+ "Unable to initialize ISP84XX.\n");
+ qla84xx_put_chip(vha);
+ }
+ }
+
return (rval);
}
@@ -2216,7 +2226,7 @@
*
* Returns a pointer to the allocated fcport, or NULL, if none available.
*/
-static fc_port_t *
+fc_port_t *
qla2x00_alloc_fcport(scsi_qla_host_t *vha, gfp_t flags)
{
fc_port_t *fcport;
@@ -2900,8 +2910,13 @@
if (qla2x00_is_reserved_id(vha, loop_id))
continue;
- if (atomic_read(&vha->loop_down_timer) || LOOP_TRANSITION(vha))
+ if (atomic_read(&vha->loop_down_timer) ||
+ LOOP_TRANSITION(vha)) {
+ atomic_set(&vha->loop_down_timer, 0);
+ set_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags);
+ set_bit(LOCAL_LOOP_UPDATE, &vha->dpc_flags);
break;
+ }
if (swl != NULL) {
if (last_dev) {
@@ -4877,6 +4892,15 @@
}
void
-qla81xx_update_fw_options(scsi_qla_host_t *ha)
+qla81xx_update_fw_options(scsi_qla_host_t *vha)
{
+ struct qla_hw_data *ha = vha->hw;
+
+ if (!ql2xetsenable)
+ return;
+
+ /* Enable ETS Burst. */
+ memset(ha->fw_options, 0, sizeof(ha->fw_options));
+ ha->fw_options[2] |= BIT_9;
+ qla2x00_set_fw_options(vha, ha->fw_options);
}
diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c
index c5ccac0..8299a98 100644
--- a/drivers/scsi/qla2xxx/qla_iocb.c
+++ b/drivers/scsi/qla2xxx/qla_iocb.c
@@ -1025,6 +1025,119 @@
/* Implicit: mbx->mbx10 = 0. */
}
+static void
+qla24xx_els_iocb(srb_t *sp, struct els_entry_24xx *els_iocb)
+{
+ struct fc_bsg_job *bsg_job = ((struct srb_bsg*)sp->ctx)->bsg_job;
+
+ els_iocb->entry_type = ELS_IOCB_TYPE;
+ els_iocb->entry_count = 1;
+ els_iocb->sys_define = 0;
+ els_iocb->entry_status = 0;
+ els_iocb->handle = sp->handle;
+ els_iocb->nport_handle = cpu_to_le16(sp->fcport->loop_id);
+ els_iocb->tx_dsd_count = __constant_cpu_to_le16(bsg_job->request_payload.sg_cnt);
+ els_iocb->vp_index = sp->fcport->vp_idx;
+ els_iocb->sof_type = EST_SOFI3;
+ els_iocb->rx_dsd_count = __constant_cpu_to_le16(bsg_job->reply_payload.sg_cnt);
+
+ els_iocb->opcode =(((struct srb_bsg*)sp->ctx)->ctx.type == SRB_ELS_CMD_RPT) ?
+ bsg_job->request->rqst_data.r_els.els_code : bsg_job->request->rqst_data.h_els.command_code;
+ els_iocb->port_id[0] = sp->fcport->d_id.b.al_pa;
+ els_iocb->port_id[1] = sp->fcport->d_id.b.area;
+ els_iocb->port_id[2] = sp->fcport->d_id.b.domain;
+ els_iocb->control_flags = 0;
+ els_iocb->rx_byte_count =
+ cpu_to_le32(bsg_job->reply_payload.payload_len);
+ els_iocb->tx_byte_count =
+ cpu_to_le32(bsg_job->request_payload.payload_len);
+
+ els_iocb->tx_address[0] = cpu_to_le32(LSD(sg_dma_address
+ (bsg_job->request_payload.sg_list)));
+ els_iocb->tx_address[1] = cpu_to_le32(MSD(sg_dma_address
+ (bsg_job->request_payload.sg_list)));
+ els_iocb->tx_len = cpu_to_le32(sg_dma_len
+ (bsg_job->request_payload.sg_list));
+
+ els_iocb->rx_address[0] = cpu_to_le32(LSD(sg_dma_address
+ (bsg_job->reply_payload.sg_list)));
+ els_iocb->rx_address[1] = cpu_to_le32(MSD(sg_dma_address
+ (bsg_job->reply_payload.sg_list)));
+ els_iocb->rx_len = cpu_to_le32(sg_dma_len
+ (bsg_job->reply_payload.sg_list));
+}
+
+static void
+qla24xx_ct_iocb(srb_t *sp, struct ct_entry_24xx *ct_iocb)
+{
+ uint16_t avail_dsds;
+ uint32_t *cur_dsd;
+ struct scatterlist *sg;
+ int index;
+ uint16_t tot_dsds;
+ scsi_qla_host_t *vha = sp->fcport->vha;
+ struct fc_bsg_job *bsg_job = ((struct srb_bsg*)sp->ctx)->bsg_job;
+ int loop_iterartion = 0;
+ int cont_iocb_prsnt = 0;
+ int entry_count = 1;
+
+ ct_iocb->entry_type = CT_IOCB_TYPE;
+ ct_iocb->entry_status = 0;
+ ct_iocb->sys_define = 0;
+ ct_iocb->handle = sp->handle;
+
+ ct_iocb->nport_handle = cpu_to_le16(sp->fcport->loop_id);
+ ct_iocb->vp_index = sp->fcport->vp_idx;
+ ct_iocb->comp_status = __constant_cpu_to_le16(0);
+
+ ct_iocb->cmd_dsd_count =
+ __constant_cpu_to_le16(bsg_job->request_payload.sg_cnt);
+ ct_iocb->timeout = 0;
+ ct_iocb->rsp_dsd_count =
+ __constant_cpu_to_le16(bsg_job->reply_payload.sg_cnt);
+ ct_iocb->rsp_byte_count =
+ cpu_to_le32(bsg_job->reply_payload.payload_len);
+ ct_iocb->cmd_byte_count =
+ cpu_to_le32(bsg_job->request_payload.payload_len);
+ ct_iocb->dseg_0_address[0] = cpu_to_le32(LSD(sg_dma_address
+ (bsg_job->request_payload.sg_list)));
+ ct_iocb->dseg_0_address[1] = cpu_to_le32(MSD(sg_dma_address
+ (bsg_job->request_payload.sg_list)));
+ ct_iocb->dseg_0_len = cpu_to_le32(sg_dma_len
+ (bsg_job->request_payload.sg_list));
+
+ avail_dsds = 1;
+ cur_dsd = (uint32_t *)ct_iocb->dseg_1_address;
+ index = 0;
+ tot_dsds = bsg_job->reply_payload.sg_cnt;
+
+ for_each_sg(bsg_job->reply_payload.sg_list, sg, tot_dsds, index) {
+ dma_addr_t sle_dma;
+ cont_a64_entry_t *cont_pkt;
+
+ /* Allocate additional continuation packets? */
+ if (avail_dsds == 0) {
+ /*
+ * Five DSDs are available in the Cont.
+ * Type 1 IOCB.
+ */
+ cont_pkt = qla2x00_prep_cont_type1_iocb(vha);
+ cur_dsd = (uint32_t *) cont_pkt->dseg_0_address;
+ avail_dsds = 5;
+ cont_iocb_prsnt = 1;
+ entry_count++;
+ }
+
+ sle_dma = sg_dma_address(sg);
+ *cur_dsd++ = cpu_to_le32(LSD(sle_dma));
+ *cur_dsd++ = cpu_to_le32(MSD(sle_dma));
+ *cur_dsd++ = cpu_to_le32(sg_dma_len(sg));
+ loop_iterartion++;
+ avail_dsds--;
+ }
+ ct_iocb->entry_count = entry_count;
+}
+
int
qla2x00_start_sp(srb_t *sp)
{
@@ -1052,6 +1165,13 @@
qla24xx_logout_iocb(sp, pkt):
qla2x00_logout_iocb(sp, pkt);
break;
+ case SRB_ELS_CMD_RPT:
+ case SRB_ELS_CMD_HST:
+ qla24xx_els_iocb(sp, pkt);
+ break;
+ case SRB_CT_CMD:
+ qla24xx_ct_iocb(sp, pkt);
+ break;
default:
break;
}
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index 6fc63b9..ab90329 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -8,6 +8,7 @@
#include <linux/delay.h>
#include <scsi/scsi_tcq.h>
+#include <scsi/scsi_bsg_fc.h>
static void qla2x00_mbx_completion(scsi_qla_host_t *, uint16_t);
static void qla2x00_process_completed_request(struct scsi_qla_host *,
@@ -881,7 +882,9 @@
index);
return NULL;
}
+
req->outstanding_cmds[index] = NULL;
+
done:
return sp;
}
@@ -982,6 +985,100 @@
}
static void
+qla24xx_els_ct_entry(scsi_qla_host_t *vha, struct req_que *req,
+ struct sts_entry_24xx *pkt, int iocb_type)
+{
+ const char func[] = "ELS_CT_IOCB";
+ const char *type;
+ struct qla_hw_data *ha = vha->hw;
+ srb_t *sp;
+ struct srb_bsg *sp_bsg;
+ struct fc_bsg_job *bsg_job;
+ uint16_t comp_status;
+ uint32_t fw_status[3];
+ uint8_t* fw_sts_ptr;
+
+ sp = qla2x00_get_sp_from_handle(vha, func, req, pkt);
+ if (!sp)
+ return;
+ sp_bsg = (struct srb_bsg*)sp->ctx;
+ bsg_job = sp_bsg->bsg_job;
+
+ type = NULL;
+ switch (sp_bsg->ctx.type) {
+ case SRB_ELS_CMD_RPT:
+ case SRB_ELS_CMD_HST:
+ type = "els";
+ break;
+ case SRB_CT_CMD:
+ type = "ct pass-through";
+ break;
+ default:
+ qla_printk(KERN_WARNING, ha,
+ "%s: Unrecognized SRB: (%p) type=%d.\n", func, sp,
+ sp_bsg->ctx.type);
+ return;
+ }
+
+ comp_status = fw_status[0] = le16_to_cpu(pkt->comp_status);
+ fw_status[1] = le16_to_cpu(((struct els_sts_entry_24xx*)pkt)->error_subcode_1);
+ fw_status[2] = le16_to_cpu(((struct els_sts_entry_24xx*)pkt)->error_subcode_2);
+
+ /* return FC_CTELS_STATUS_OK and leave the decoding of the ELS/CT
+ * fc payload to the caller
+ */
+ bsg_job->reply->reply_data.ctels_reply.status = FC_CTELS_STATUS_OK;
+ bsg_job->reply_len = sizeof(struct fc_bsg_reply) + sizeof(fw_status);
+
+ if (comp_status != CS_COMPLETE) {
+ if (comp_status == CS_DATA_UNDERRUN) {
+ bsg_job->reply->result = DID_OK << 16;
+ bsg_job->reply->reply_payload_rcv_len =
+ le16_to_cpu(((struct els_sts_entry_24xx*)pkt)->total_byte_count);
+
+ DEBUG2(qla_printk(KERN_WARNING, ha,
+ "scsi(%ld:0x%x): ELS-CT pass-through-%s error comp_status-status=0x%x "
+ "error subcode 1=0x%x error subcode 2=0x%x total_byte = 0x%x.\n",
+ vha->host_no, sp->handle, type, comp_status, fw_status[1], fw_status[2],
+ le16_to_cpu(((struct els_sts_entry_24xx*)pkt)->total_byte_count)));
+ fw_sts_ptr = ((uint8_t*)bsg_job->req->sense) + sizeof(struct fc_bsg_reply);
+ memcpy( fw_sts_ptr, fw_status, sizeof(fw_status));
+ }
+ else {
+ DEBUG2(qla_printk(KERN_WARNING, ha,
+ "scsi(%ld:0x%x): ELS-CT pass-through-%s error comp_status-status=0x%x "
+ "error subcode 1=0x%x error subcode 2=0x%x.\n",
+ vha->host_no, sp->handle, type, comp_status,
+ le16_to_cpu(((struct els_sts_entry_24xx*)pkt)->error_subcode_1),
+ le16_to_cpu(((struct els_sts_entry_24xx*)pkt)->error_subcode_2)));
+ bsg_job->reply->result = DID_ERROR << 16;
+ bsg_job->reply->reply_payload_rcv_len = 0;
+ fw_sts_ptr = ((uint8_t*)bsg_job->req->sense) + sizeof(struct fc_bsg_reply);
+ memcpy( fw_sts_ptr, fw_status, sizeof(fw_status));
+ }
+ DEBUG2(qla2x00_dump_buffer((uint8_t *)pkt, sizeof(*pkt)));
+ }
+ else {
+ bsg_job->reply->result = DID_OK << 16;;
+ bsg_job->reply->reply_payload_rcv_len = bsg_job->reply_payload.payload_len;
+ bsg_job->reply_len = 0;
+ }
+
+ dma_unmap_sg(&ha->pdev->dev,
+ bsg_job->request_payload.sg_list,
+ bsg_job->request_payload.sg_cnt, DMA_TO_DEVICE);
+ dma_unmap_sg(&ha->pdev->dev,
+ bsg_job->reply_payload.sg_list,
+ bsg_job->reply_payload.sg_cnt, DMA_FROM_DEVICE);
+ if ((sp_bsg->ctx.type == SRB_ELS_CMD_HST) ||
+ (sp_bsg->ctx.type == SRB_CT_CMD))
+ kfree(sp->fcport);
+ kfree(sp->ctx);
+ mempool_free(sp, ha->srb_mempool);
+ bsg_job->job_done(bsg_job);
+}
+
+static void
qla24xx_logio_entry(scsi_qla_host_t *vha, struct req_que *req,
struct logio_entry_24xx *logio)
{
@@ -1749,6 +1846,13 @@
qla24xx_logio_entry(vha, rsp->req,
(struct logio_entry_24xx *)pkt);
break;
+ case CT_IOCB_TYPE:
+ qla24xx_els_ct_entry(vha, rsp->req, pkt, CT_IOCB_TYPE);
+ clear_bit(MBX_INTERRUPT, &vha->hw->mbx_cmd_flags);
+ break;
+ case ELS_IOCB_TYPE:
+ qla24xx_els_ct_entry(vha, rsp->req, pkt, ELS_IOCB_TYPE);
+ break;
default:
/* Type Not Supported. */
DEBUG4(printk(KERN_WARNING
@@ -2049,7 +2153,6 @@
set_bit(MBX_INTERRUPT, &ha->mbx_cmd_flags);
complete(&ha->mbx_intr_comp);
}
-
return IRQ_HANDLED;
}
@@ -2255,10 +2358,11 @@
if (ha->flags.msix_enabled)
qla24xx_disable_msix(ha);
- else if (ha->flags.inta_enabled) {
+ else if (ha->flags.msi_enabled) {
free_irq(ha->pdev->irq, rsp);
pci_disable_msi(ha->pdev);
- }
+ } else
+ free_irq(ha->pdev->irq, rsp);
}
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index 056e4d4..6e53bdb 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -3636,6 +3636,157 @@
}
int
+qla2x00_loopback_test(scsi_qla_host_t *vha, struct msg_echo_lb *mreq, uint16_t *mresp)
+{
+ int rval;
+ mbx_cmd_t mc;
+ mbx_cmd_t *mcp = &mc;
+ uint32_t iter_cnt = 0x1;
+
+ DEBUG11(printk("scsi(%ld): entered.\n", vha->host_no));
+
+ memset(mcp->mb, 0 , sizeof(mcp->mb));
+ mcp->mb[0] = MBC_DIAGNOSTIC_LOOP_BACK;
+ mcp->mb[1] = mreq->options | BIT_6; // BIT_6 specifies 64 bit addressing
+
+ /* transfer count */
+ mcp->mb[10] = LSW(mreq->transfer_size);
+ mcp->mb[11] = MSW(mreq->transfer_size);
+
+ /* send data address */
+ mcp->mb[14] = LSW(mreq->send_dma);
+ mcp->mb[15] = MSW(mreq->send_dma);
+ mcp->mb[20] = LSW(MSD(mreq->send_dma));
+ mcp->mb[21] = MSW(MSD(mreq->send_dma));
+
+ /* recieve data address */
+ mcp->mb[16] = LSW(mreq->rcv_dma);
+ mcp->mb[17] = MSW(mreq->rcv_dma);
+ mcp->mb[6] = LSW(MSD(mreq->rcv_dma));
+ mcp->mb[7] = MSW(MSD(mreq->rcv_dma));
+
+ /* Iteration count */
+ mcp->mb[18] = LSW(iter_cnt);
+ mcp->mb[19] = MSW(iter_cnt);
+
+ mcp->out_mb = MBX_21|MBX_20|MBX_19|MBX_18|MBX_17|MBX_16|MBX_15|
+ MBX_14|MBX_13|MBX_12|MBX_11|MBX_10|MBX_7|MBX_6|MBX_1|MBX_0;
+ if (IS_QLA81XX(vha->hw))
+ mcp->out_mb |= MBX_2;
+ mcp->in_mb = MBX_19|MBX_18|MBX_3|MBX_2|MBX_1|MBX_0;
+
+ mcp->buf_size = mreq->transfer_size;
+ mcp->tov = MBX_TOV_SECONDS;
+ mcp->flags = MBX_DMA_OUT|MBX_DMA_IN|IOCTL_CMD;
+
+ rval = qla2x00_mailbox_command(vha, mcp);
+
+ if (rval != QLA_SUCCESS) {
+ DEBUG2(printk(KERN_WARNING
+ "(%ld): failed=%x mb[0]=0x%x "
+ "mb[1]=0x%x mb[2]=0x%x mb[3]=0x%x mb[18]=0x%x mb[19]=0x%x. \n", vha->host_no, rval,
+ mcp->mb[0], mcp->mb[1], mcp->mb[2], mcp->mb[3], mcp->mb[18], mcp->mb[19]));
+ } else {
+ DEBUG2(printk(KERN_WARNING
+ "scsi(%ld): done.\n", vha->host_no));
+ }
+
+ /* Copy mailbox information */
+ memcpy( mresp, mcp->mb, 64);
+ mresp[3] = mcp->mb[18];
+ mresp[4] = mcp->mb[19];
+ return rval;
+}
+
+int
+qla2x00_echo_test(scsi_qla_host_t *vha, struct msg_echo_lb *mreq, uint16_t *mresp)
+{
+ int rval;
+ mbx_cmd_t mc;
+ mbx_cmd_t *mcp = &mc;
+ struct qla_hw_data *ha = vha->hw;
+
+ DEBUG11(printk("scsi(%ld): entered.\n", vha->host_no));
+
+ memset(mcp->mb, 0 , sizeof(mcp->mb));
+ mcp->mb[0] = MBC_DIAGNOSTIC_ECHO;
+ mcp->mb[1] = mreq->options | BIT_6; /* BIT_6 specifies 64bit address */
+ if (IS_QLA81XX(ha))
+ mcp->mb[1] |= BIT_15;
+ mcp->mb[2] = IS_QLA81XX(ha) ? vha->fcoe_fcf_idx : 0;
+ mcp->mb[16] = LSW(mreq->rcv_dma);
+ mcp->mb[17] = MSW(mreq->rcv_dma);
+ mcp->mb[6] = LSW(MSD(mreq->rcv_dma));
+ mcp->mb[7] = MSW(MSD(mreq->rcv_dma));
+
+ mcp->mb[10] = LSW(mreq->transfer_size);
+
+ mcp->mb[14] = LSW(mreq->send_dma);
+ mcp->mb[15] = MSW(mreq->send_dma);
+ mcp->mb[20] = LSW(MSD(mreq->send_dma));
+ mcp->mb[21] = MSW(MSD(mreq->send_dma));
+
+ mcp->out_mb = MBX_21|MBX_20|MBX_17|MBX_16|MBX_15|
+ MBX_14|MBX_10|MBX_7|MBX_6|MBX_1|MBX_0;
+ if (IS_QLA81XX(ha))
+ mcp->out_mb |= MBX_2;
+
+ mcp->in_mb = MBX_0;
+ if (IS_QLA24XX_TYPE(ha) || IS_QLA25XX(ha) || IS_QLA81XX(ha))
+ mcp->in_mb |= MBX_1;
+ if (IS_QLA81XX(ha))
+ mcp->in_mb |= MBX_3;
+
+ mcp->tov = MBX_TOV_SECONDS;
+ mcp->flags = MBX_DMA_OUT|MBX_DMA_IN|IOCTL_CMD;
+ mcp->buf_size = mreq->transfer_size;
+
+ rval = qla2x00_mailbox_command(vha, mcp);
+
+ if (rval != QLA_SUCCESS) {
+ DEBUG2(printk(KERN_WARNING
+ "(%ld): failed=%x mb[0]=0x%x mb[1]=0x%x.\n",
+ vha->host_no, rval, mcp->mb[0], mcp->mb[1]));
+ } else {
+ DEBUG2(printk(KERN_WARNING
+ "scsi(%ld): done.\n", vha->host_no));
+ }
+
+ /* Copy mailbox information */
+ memcpy( mresp, mcp->mb, 32);
+ return rval;
+}
+int
+qla84xx_reset_chip(scsi_qla_host_t *ha, uint16_t enable_diagnostic,
+ uint16_t *cmd_status)
+{
+ int rval;
+ mbx_cmd_t mc;
+ mbx_cmd_t *mcp = &mc;
+
+ DEBUG16(printk("%s(%ld): enable_diag=%d entered.\n", __func__,
+ ha->host_no, enable_diagnostic));
+
+ mcp->mb[0] = MBC_ISP84XX_RESET;
+ mcp->mb[1] = enable_diagnostic;
+ mcp->out_mb = MBX_1|MBX_0;
+ mcp->in_mb = MBX_1|MBX_0;
+ mcp->tov = MBX_TOV_SECONDS;
+ mcp->flags = MBX_DMA_OUT|MBX_DMA_IN|IOCTL_CMD;
+ rval = qla2x00_mailbox_command(ha, mcp);
+
+ /* Return mailbox statuses. */
+ *cmd_status = mcp->mb[0];
+ if (rval != QLA_SUCCESS)
+ DEBUG16(printk("%s(%ld): failed=%x.\n", __func__, ha->host_no,
+ rval));
+ else
+ DEBUG16(printk("%s(%ld): done.\n", __func__, ha->host_no));
+
+ return rval;
+}
+
+int
qla2x00_write_ram_word(scsi_qla_host_t *vha, uint32_t risc_addr, uint32_t data)
{
int rval;
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 8529eb1..46720b2 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -107,6 +107,12 @@
" 1 -- load firmware from flash.\n"
" 0 -- use default semantics.\n");
+int ql2xetsenable;
+module_param(ql2xetsenable, int, S_IRUGO|S_IRUSR);
+MODULE_PARM_DESC(ql2xetsenable,
+ "Enables firmware ETS burst."
+ "Default is 0 - skip ETS enablement.");
+
/*
* SCSI host template entry points
*/
@@ -682,44 +688,6 @@
return (return_status);
}
-void
-qla2x00_abort_fcport_cmds(fc_port_t *fcport)
-{
- int cnt;
- unsigned long flags;
- srb_t *sp;
- scsi_qla_host_t *vha = fcport->vha;
- struct qla_hw_data *ha = vha->hw;
- struct req_que *req;
-
- spin_lock_irqsave(&ha->hardware_lock, flags);
- req = vha->req;
- for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) {
- sp = req->outstanding_cmds[cnt];
- if (!sp)
- continue;
- if (sp->fcport != fcport)
- continue;
- if (sp->ctx)
- continue;
-
- spin_unlock_irqrestore(&ha->hardware_lock, flags);
- if (ha->isp_ops->abort_command(sp)) {
- DEBUG2(qla_printk(KERN_WARNING, ha,
- "Abort failed -- %lx\n",
- sp->cmd->serial_number));
- } else {
- if (qla2x00_eh_wait_on_command(sp->cmd) !=
- QLA_SUCCESS)
- DEBUG2(qla_printk(KERN_WARNING, ha,
- "Abort failed while waiting -- %lx\n",
- sp->cmd->serial_number));
- }
- spin_lock_irqsave(&ha->hardware_lock, flags);
- }
- spin_unlock_irqrestore(&ha->hardware_lock, flags);
-}
-
/**************************************************************************
* qla2xxx_eh_abort
*
@@ -1095,6 +1063,20 @@
struct fc_port *fcport;
struct qla_hw_data *ha = vha->hw;
+ if (ha->flags.enable_target_reset) {
+ list_for_each_entry(fcport, &vha->vp_fcports, list) {
+ if (fcport->port_type != FCT_TARGET)
+ continue;
+
+ ret = ha->isp_ops->target_reset(fcport, 0, 0);
+ if (ret != QLA_SUCCESS) {
+ DEBUG2_3(printk("%s(%ld): bus_reset failed: "
+ "target_reset=%d d_id=%x.\n", __func__,
+ vha->host_no, ret, fcport->d_id.b24));
+ }
+ }
+ }
+
if (ha->flags.enable_lip_full_login && !IS_QLA81XX(ha)) {
ret = qla2x00_full_login_lip(vha);
if (ret != QLA_SUCCESS) {
@@ -1117,19 +1099,6 @@
qla2x00_wait_for_loop_ready(vha);
}
- if (ha->flags.enable_target_reset) {
- list_for_each_entry(fcport, &vha->vp_fcports, list) {
- if (fcport->port_type != FCT_TARGET)
- continue;
-
- ret = ha->isp_ops->target_reset(fcport, 0, 0);
- if (ret != QLA_SUCCESS) {
- DEBUG2_3(printk("%s(%ld): bus_reset failed: "
- "target_reset=%d d_id=%x.\n", __func__,
- vha->host_no, ret, fcport->d_id.b24));
- }
- }
- }
/* Issue marker command only when we are going to start the I/O */
vha->marker_needed = 1;
@@ -1160,8 +1129,19 @@
qla2x00_sp_compl(ha, sp);
} else {
ctx = sp->ctx;
- del_timer_sync(&ctx->timer);
- ctx->free(sp);
+ if (ctx->type == SRB_LOGIN_CMD || ctx->type == SRB_LOGOUT_CMD) {
+ del_timer_sync(&ctx->timer);
+ ctx->free(sp);
+ } else {
+ struct srb_bsg* sp_bsg = (struct srb_bsg*)sp->ctx;
+ if (sp_bsg->bsg_job->request->msgcode == FC_BSG_HST_CT)
+ kfree(sp->fcport);
+ sp_bsg->bsg_job->req->errors = 0;
+ sp_bsg->bsg_job->reply->result = res;
+ sp_bsg->bsg_job->job_done(sp_bsg->bsg_job);
+ kfree(sp->ctx);
+ mempool_free(sp, ha->srb_mempool);
+ }
}
}
}
@@ -1258,7 +1238,7 @@
qla2x00_adjust_sdev_qdepth_up(sdev, qdepth);
break;
default:
- return EOPNOTSUPP;
+ return -EOPNOTSUPP;
}
return sdev->queue_depth;
@@ -1818,7 +1798,6 @@
/* Set EEH reset type to fundamental if required by hba */
if ( IS_QLA24XX(ha) || IS_QLA25XX(ha) || IS_QLA81XX(ha)) {
pdev->needs_freset = 1;
- pci_save_state(pdev);
}
/* Configure PCI I/O space */
@@ -1970,11 +1949,15 @@
host->max_channel = MAX_BUSES - 1;
host->max_lun = MAX_LUNS;
host->transportt = qla2xxx_transport_template;
+ sht->vendor_id = (SCSI_NL_VID_TYPE_PCI | PCI_VENDOR_ID_QLOGIC);
/* Set up the irqs */
ret = qla2x00_request_irqs(ha, rsp);
if (ret)
goto probe_init_failed;
+
+ pci_save_state(pdev);
+
/* Alloc arrays of request and response ring ptrs */
que_init:
if (!qla2x00_alloc_queues(ha)) {
@@ -2176,6 +2159,8 @@
kfree(ha);
ha = NULL;
+ pci_disable_pcie_error_reporting(pdev);
+
pci_disable_device(pdev);
pci_set_drvdata(pdev, NULL);
}
@@ -3310,6 +3295,7 @@
return PCI_ERS_RESULT_CAN_RECOVER;
case pci_channel_io_frozen:
ha->flags.eeh_busy = 1;
+ qla2x00_free_irqs(vha);
pci_disable_device(pdev);
return PCI_ERS_RESULT_NEED_RESET;
case pci_channel_io_perm_failure:
@@ -3363,10 +3349,24 @@
pci_ers_result_t ret = PCI_ERS_RESULT_DISCONNECT;
scsi_qla_host_t *base_vha = pci_get_drvdata(pdev);
struct qla_hw_data *ha = base_vha->hw;
- int rc;
+ struct rsp_que *rsp;
+ int rc, retries = 10;
DEBUG17(qla_printk(KERN_WARNING, ha, "slot_reset\n"));
+ /* Workaround: qla2xxx driver which access hardware earlier
+ * needs error state to be pci_channel_io_online.
+ * Otherwise mailbox command timesout.
+ */
+ pdev->error_state = pci_channel_io_normal;
+
+ pci_restore_state(pdev);
+
+ /* pci_restore_state() clears the saved_state flag of the device
+ * save restored state which resets saved_state flag
+ */
+ pci_save_state(pdev);
+
if (ha->mem_only)
rc = pci_enable_device_mem(pdev);
else
@@ -3378,27 +3378,23 @@
return ret;
}
+ rsp = ha->rsp_q_map[0];
+ if (qla2x00_request_irqs(ha, rsp))
+ return ret;
+
if (ha->isp_ops->pci_config(base_vha))
return ret;
-#ifdef QL_DEBUG_LEVEL_17
- {
- uint8_t b;
- uint32_t i;
+ while (ha->flags.mbox_busy && retries--)
+ msleep(1000);
- printk("slot_reset_1: ");
- for (i = 0; i < 256; i++) {
- pci_read_config_byte(ha->pdev, i, &b);
- printk("%s%02x", (i%16) ? " " : "\n", b);
- }
- printk("\n");
- }
-#endif
set_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags);
if (qla2x00_abort_isp(base_vha) == QLA_SUCCESS)
ret = PCI_ERS_RESULT_RECOVERED;
clear_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags);
+ pci_cleanup_aer_uncorrect_error_status(pdev);
+
DEBUG17(qla_printk(KERN_WARNING, ha,
"slot_reset-return:ret=%x\n", ret));
@@ -3422,8 +3418,6 @@
}
ha->flags.eeh_busy = 0;
-
- pci_cleanup_aer_uncorrect_error_status(pdev);
}
static struct pci_error_handlers qla2xxx_err_handler = {
@@ -3536,4 +3530,3 @@
MODULE_FIRMWARE(FW_FILE_ISP2322);
MODULE_FIRMWARE(FW_FILE_ISP24XX);
MODULE_FIRMWARE(FW_FILE_ISP25XX);
-MODULE_FIRMWARE(FW_FILE_ISP81XX);
diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h
index ed36279..8d2fc2f 100644
--- a/drivers/scsi/qla2xxx/qla_version.h
+++ b/drivers/scsi/qla2xxx/qla_version.h
@@ -7,9 +7,9 @@
/*
* Driver version
*/
-#define QLA2XXX_VERSION "8.03.01-k10"
+#define QLA2XXX_VERSION "8.03.02-k1"
#define QLA_DRIVER_MAJOR_VER 8
#define QLA_DRIVER_MINOR_VER 3
-#define QLA_DRIVER_PATCH_VER 1
-#define QLA_DRIVER_BETA_VER 0
+#define QLA_DRIVER_PATCH_VER 2
+#define QLA_DRIVER_BETA_VER 1
diff --git a/drivers/scsi/qla4xxx/ql4_init.c b/drivers/scsi/qla4xxx/ql4_init.c
index af8c323..92329a4 100644
--- a/drivers/scsi/qla4xxx/ql4_init.c
+++ b/drivers/scsi/qla4xxx/ql4_init.c
@@ -844,10 +844,10 @@
DEBUG2(printk("scsi%ld: %s: Get EEProm parameters \n", ha->host_no,
__func__));
if (ql4xxx_lock_flash(ha) != QLA_SUCCESS)
- return (QLA_ERROR);
+ return QLA_ERROR;
if (ql4xxx_lock_nvram(ha) != QLA_SUCCESS) {
ql4xxx_unlock_flash(ha);
- return (QLA_ERROR);
+ return QLA_ERROR;
}
/* Get EEPRom Parameters from NVRAM and validate */
@@ -858,20 +858,18 @@
rd_nvram_word(ha, eeprom_ext_hw_conf_offset(ha));
spin_unlock_irqrestore(&ha->hardware_lock, flags);
} else {
- /*
- * QLogic adapters should always have a valid NVRAM.
- * If not valid, do not load.
- */
dev_warn(&ha->pdev->dev,
"scsi%ld: %s: EEProm checksum invalid. "
"Please update your EEPROM\n", ha->host_no,
__func__);
- /* set defaults */
+ /* Attempt to set defaults */
if (is_qla4010(ha))
extHwConfig.Asuint32_t = 0x1912;
else if (is_qla4022(ha) | is_qla4032(ha))
extHwConfig.Asuint32_t = 0x0023;
+ else
+ return QLA_ERROR;
}
DEBUG(printk("scsi%ld: %s: Setting extHwConfig to 0xFFFF%04x\n",
ha->host_no, __func__, extHwConfig.Asuint32_t));
@@ -884,7 +882,7 @@
ql4xxx_unlock_nvram(ha);
ql4xxx_unlock_flash(ha);
- return (QLA_SUCCESS);
+ return QLA_SUCCESS;
}
static void qla4x00_pci_config(struct scsi_qla_host *ha)
diff --git a/drivers/scsi/raid_class.c b/drivers/scsi/raid_class.c
index 8e5c169..bd88349 100644
--- a/drivers/scsi/raid_class.c
+++ b/drivers/scsi/raid_class.c
@@ -149,6 +149,7 @@
{ RAID_LEVEL_0, "raid0" },
{ RAID_LEVEL_1, "raid1" },
{ RAID_LEVEL_10, "raid10" },
+ { RAID_LEVEL_1E, "raid1e" },
{ RAID_LEVEL_3, "raid3" },
{ RAID_LEVEL_4, "raid4" },
{ RAID_LEVEL_5, "raid5" },
diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c
index a60da55..513661f 100644
--- a/drivers/scsi/scsi.c
+++ b/drivers/scsi/scsi.c
@@ -1026,55 +1026,39 @@
* responsible for calling kfree() on this pointer when it is no longer
* needed. If we cannot retrieve the VPD page this routine returns %NULL.
*/
-unsigned char *scsi_get_vpd_page(struct scsi_device *sdev, u8 page)
+int scsi_get_vpd_page(struct scsi_device *sdev, u8 page, unsigned char *buf,
+ int buf_len)
{
int i, result;
- unsigned int len;
- const unsigned int init_vpd_len = 255;
- unsigned char *buf = kmalloc(init_vpd_len, GFP_KERNEL);
-
- if (!buf)
- return NULL;
/* Ask for all the pages supported by this device */
- result = scsi_vpd_inquiry(sdev, buf, 0, init_vpd_len);
+ result = scsi_vpd_inquiry(sdev, buf, 0, buf_len);
if (result)
goto fail;
/* If the user actually wanted this page, we can skip the rest */
if (page == 0)
- return buf;
+ return -EINVAL;
- for (i = 0; i < buf[3]; i++)
+ for (i = 0; i < min((int)buf[3], buf_len - 4); i++)
if (buf[i + 4] == page)
goto found;
+
+ if (i < buf[3] && i > buf_len)
+ /* ran off the end of the buffer, give us benefit of doubt */
+ goto found;
/* The device claims it doesn't support the requested page */
goto fail;
found:
- result = scsi_vpd_inquiry(sdev, buf, page, 255);
+ result = scsi_vpd_inquiry(sdev, buf, page, buf_len);
if (result)
goto fail;
- /*
- * Some pages are longer than 255 bytes. The actual length of
- * the page is returned in the header.
- */
- len = ((buf[2] << 8) | buf[3]) + 4;
- if (len <= init_vpd_len)
- return buf;
-
- kfree(buf);
- buf = kmalloc(len, GFP_KERNEL);
- result = scsi_vpd_inquiry(sdev, buf, page, len);
- if (result)
- goto fail;
-
- return buf;
+ return 0;
fail:
- kfree(buf);
- return NULL;
+ return -EINVAL;
}
EXPORT_SYMBOL_GPL(scsi_get_vpd_page);
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index c664242..5697709 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -773,8 +773,14 @@
* we already took a copy of the original into rq->errors which
* is what gets returned to the user
*/
- if (sense_valid && sshdr.sense_key == RECOVERED_ERROR) {
- if (!(req->cmd_flags & REQ_QUIET))
+ if (sense_valid && (sshdr.sense_key == RECOVERED_ERROR)) {
+ /* if ATA PASS-THROUGH INFORMATION AVAILABLE skip
+ * print since caller wants ATA registers. Only occurs on
+ * SCSI ATA PASS_THROUGH commands when CK_COND=1
+ */
+ if ((sshdr.asc == 0x0) && (sshdr.ascq == 0x1d))
+ ;
+ else if (!(req->cmd_flags & REQ_QUIET))
scsi_print_sense("", cmd);
result = 0;
/* BLOCK_PC may have set error */
diff --git a/drivers/scsi/scsi_sas_internal.h b/drivers/scsi/scsi_sas_internal.h
index 998cb5b..6266a5d 100644
--- a/drivers/scsi/scsi_sas_internal.h
+++ b/drivers/scsi/scsi_sas_internal.h
@@ -5,7 +5,7 @@
#define SAS_PHY_ATTRS 17
#define SAS_PORT_ATTRS 1
#define SAS_RPORT_ATTRS 7
-#define SAS_END_DEV_ATTRS 3
+#define SAS_END_DEV_ATTRS 5
#define SAS_EXPANDER_ATTRS 7
struct sas_internal {
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index 012f73a..f697229 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -1339,8 +1339,10 @@
sdev = scsi_alloc_sdev(starget, 0, NULL);
if (!sdev)
return 0;
- if (scsi_device_get(sdev))
+ if (scsi_device_get(sdev)) {
+ __scsi_remove_device(sdev);
return 0;
+ }
}
sprintf(devname, "host %d channel %d id %d",
@@ -1907,10 +1909,9 @@
goto out;
sdev = scsi_alloc_sdev(starget, 0, NULL);
- if (sdev) {
- sdev->sdev_gendev.parent = get_device(&starget->dev);
+ if (sdev)
sdev->borken = 0;
- } else
+ else
scsi_target_reap(starget);
put_device(&starget->dev);
out:
diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index 5a06505..a4936c4 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -878,7 +878,8 @@
struct request_queue *rq = sdev->request_queue;
struct scsi_target *starget = sdev->sdev_target;
- if ((error = scsi_device_set_state(sdev, SDEV_RUNNING)) != 0)
+ error = scsi_device_set_state(sdev, SDEV_RUNNING);
+ if (error)
return error;
error = scsi_target_add(starget);
@@ -889,13 +890,13 @@
error = device_add(&sdev->sdev_gendev);
if (error) {
printk(KERN_INFO "error 1\n");
- goto out_remove;
+ return error;
}
error = device_add(&sdev->sdev_dev);
if (error) {
printk(KERN_INFO "error 2\n");
device_del(&sdev->sdev_gendev);
- goto out_remove;
+ return error;
}
transport_add_device(&sdev->sdev_gendev);
sdev->is_visible = 1;
@@ -910,14 +911,14 @@
else
error = device_create_file(&sdev->sdev_gendev, &dev_attr_queue_depth);
if (error)
- goto out_remove;
+ return error;
if (sdev->host->hostt->change_queue_type)
error = device_create_file(&sdev->sdev_gendev, &sdev_attr_queue_type_rw);
else
error = device_create_file(&sdev->sdev_gendev, &dev_attr_queue_type);
if (error)
- goto out_remove;
+ return error;
error = bsg_register_queue(rq, &sdev->sdev_gendev, NULL, NULL);
@@ -933,16 +934,11 @@
error = device_create_file(&sdev->sdev_gendev,
sdev->host->hostt->sdev_attrs[i]);
if (error)
- goto out_remove;
+ return error;
}
}
- return 0;
-
- out_remove:
- __scsi_remove_device(sdev);
return error;
-
}
void __scsi_remove_device(struct scsi_device *sdev)
diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c
index 653f22a..79660ee 100644
--- a/drivers/scsi/scsi_transport_fc.c
+++ b/drivers/scsi/scsi_transport_fc.c
@@ -475,7 +475,8 @@
"Maximum number of seconds that the FC transport should"
" insulate the loss of a remote port. Once this value is"
" exceeded, the scsi target is removed. Value should be"
- " between 1 and SCSI_DEVICE_BLOCK_MAX_TIMEOUT.");
+ " between 1 and SCSI_DEVICE_BLOCK_MAX_TIMEOUT if"
+ " fast_io_fail_tmo is not set.");
/*
* Netlink Infrastructure
@@ -842,9 +843,17 @@
(rport->port_state == FC_PORTSTATE_NOTPRESENT))
return -EBUSY;
val = simple_strtoul(buf, &cp, 0);
- if ((*cp && (*cp != '\n')) ||
- (val < 0) || (val > SCSI_DEVICE_BLOCK_MAX_TIMEOUT))
+ if ((*cp && (*cp != '\n')) || (val < 0))
return -EINVAL;
+
+ /*
+ * If fast_io_fail is off we have to cap
+ * dev_loss_tmo at SCSI_DEVICE_BLOCK_MAX_TIMEOUT
+ */
+ if (rport->fast_io_fail_tmo == -1 &&
+ val > SCSI_DEVICE_BLOCK_MAX_TIMEOUT)
+ return -EINVAL;
+
i->f->set_rport_dev_loss_tmo(rport, val);
return count;
}
@@ -925,9 +934,16 @@
rport->fast_io_fail_tmo = -1;
else {
val = simple_strtoul(buf, &cp, 0);
- if ((*cp && (*cp != '\n')) ||
- (val < 0) || (val >= rport->dev_loss_tmo))
+ if ((*cp && (*cp != '\n')) || (val < 0))
return -EINVAL;
+ /*
+ * Cap fast_io_fail by dev_loss_tmo or
+ * SCSI_DEVICE_BLOCK_MAX_TIMEOUT.
+ */
+ if ((val >= rport->dev_loss_tmo) ||
+ (val > SCSI_DEVICE_BLOCK_MAX_TIMEOUT))
+ return -EINVAL;
+
rport->fast_io_fail_tmo = val;
}
return count;
diff --git a/drivers/scsi/scsi_transport_sas.c b/drivers/scsi/scsi_transport_sas.c
index f27e52d..927e99c 100644
--- a/drivers/scsi/scsi_transport_sas.c
+++ b/drivers/scsi/scsi_transport_sas.c
@@ -155,6 +155,17 @@
sas_bitfield_name_search(linkspeed, sas_linkspeed_names)
sas_bitfield_name_set(linkspeed, sas_linkspeed_names)
+static struct sas_end_device *sas_sdev_to_rdev(struct scsi_device *sdev)
+{
+ struct sas_rphy *rphy = target_to_rphy(sdev->sdev_target);
+ struct sas_end_device *rdev;
+
+ BUG_ON(rphy->identify.device_type != SAS_END_DEVICE);
+
+ rdev = rphy_to_end_device(rphy);
+ return rdev;
+}
+
static void sas_smp_request(struct request_queue *q, struct Scsi_Host *shost,
struct sas_rphy *rphy)
{
@@ -358,6 +369,85 @@
}
EXPORT_SYMBOL(sas_remove_host);
+/**
+ * sas_tlr_supported - checking TLR bit in vpd 0x90
+ * @sdev: scsi device struct
+ *
+ * Check Transport Layer Retries are supported or not.
+ * If vpd page 0x90 is present, TRL is supported.
+ *
+ */
+unsigned int
+sas_tlr_supported(struct scsi_device *sdev)
+{
+ const int vpd_len = 32;
+ struct sas_end_device *rdev = sas_sdev_to_rdev(sdev);
+ char *buffer = kzalloc(vpd_len, GFP_KERNEL);
+ int ret = 0;
+
+ if (scsi_get_vpd_page(sdev, 0x90, buffer, vpd_len))
+ goto out;
+
+ /*
+ * Magic numbers: the VPD Protocol page (0x90)
+ * has a 4 byte header and then one entry per device port
+ * the TLR bit is at offset 8 on each port entry
+ * if we take the first port, that's at total offset 12
+ */
+ ret = buffer[12] & 0x01;
+
+ out:
+ kfree(buffer);
+ rdev->tlr_supported = ret;
+ return ret;
+
+}
+EXPORT_SYMBOL_GPL(sas_tlr_supported);
+
+/**
+ * sas_disable_tlr - setting TLR flags
+ * @sdev: scsi device struct
+ *
+ * Seting tlr_enabled flag to 0.
+ *
+ */
+void
+sas_disable_tlr(struct scsi_device *sdev)
+{
+ struct sas_end_device *rdev = sas_sdev_to_rdev(sdev);
+
+ rdev->tlr_enabled = 0;
+}
+EXPORT_SYMBOL_GPL(sas_disable_tlr);
+
+/**
+ * sas_enable_tlr - setting TLR flags
+ * @sdev: scsi device struct
+ *
+ * Seting tlr_enabled flag 1.
+ *
+ */
+void sas_enable_tlr(struct scsi_device *sdev)
+{
+ unsigned int tlr_supported = 0;
+ tlr_supported = sas_tlr_supported(sdev);
+
+ if (tlr_supported) {
+ struct sas_end_device *rdev = sas_sdev_to_rdev(sdev);
+
+ rdev->tlr_enabled = 1;
+ }
+
+ return;
+}
+EXPORT_SYMBOL_GPL(sas_enable_tlr);
+
+unsigned int sas_is_tlr_enabled(struct scsi_device *sdev)
+{
+ struct sas_end_device *rdev = sas_sdev_to_rdev(sdev);
+ return rdev->tlr_enabled;
+}
+EXPORT_SYMBOL_GPL(sas_is_tlr_enabled);
/*
* SAS Phy attributes
@@ -1146,15 +1236,10 @@
int sas_read_port_mode_page(struct scsi_device *sdev)
{
char *buffer = kzalloc(BUF_SIZE, GFP_KERNEL), *msdata;
- struct sas_rphy *rphy = target_to_rphy(sdev->sdev_target);
- struct sas_end_device *rdev;
+ struct sas_end_device *rdev = sas_sdev_to_rdev(sdev);
struct scsi_mode_data mode_data;
int res, error;
- BUG_ON(rphy->identify.device_type != SAS_END_DEVICE);
-
- rdev = rphy_to_end_device(rphy);
-
if (!buffer)
return -ENOMEM;
@@ -1207,6 +1292,10 @@
"%d\n", int);
sas_end_dev_simple_attr(initiator_response_timeout, initiator_response_timeout,
"%d\n", int);
+sas_end_dev_simple_attr(tlr_supported, tlr_supported,
+ "%d\n", int);
+sas_end_dev_simple_attr(tlr_enabled, tlr_enabled,
+ "%d\n", int);
static DECLARE_TRANSPORT_CLASS(sas_expander_class,
"sas_expander", NULL, NULL, NULL);
@@ -1733,6 +1822,8 @@
SETUP_END_DEV_ATTRIBUTE(end_dev_ready_led_meaning);
SETUP_END_DEV_ATTRIBUTE(end_dev_I_T_nexus_loss_timeout);
SETUP_END_DEV_ATTRIBUTE(end_dev_initiator_response_timeout);
+ SETUP_END_DEV_ATTRIBUTE(end_dev_tlr_supported);
+ SETUP_END_DEV_ATTRIBUTE(end_dev_tlr_enabled);
i->end_dev_attrs[count] = NULL;
count = 0;
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 255da53..1dd4d84 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -1196,19 +1196,10 @@
SCpnt->result = 0;
memset(SCpnt->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
break;
- case ABORTED_COMMAND:
- if (sshdr.asc == 0x10) { /* DIF: Disk detected corruption */
- scsi_print_result(SCpnt);
- scsi_print_sense("sd", SCpnt);
+ case ABORTED_COMMAND: /* DIF: Target detected corruption */
+ case ILLEGAL_REQUEST: /* DIX: Host detected corruption */
+ if (sshdr.asc == 0x10)
good_bytes = sd_completed_bytes(SCpnt);
- }
- break;
- case ILLEGAL_REQUEST:
- if (sshdr.asc == 0x10) { /* DIX: HBA detected corruption */
- scsi_print_result(SCpnt);
- scsi_print_sense("sd", SCpnt);
- good_bytes = sd_completed_bytes(SCpnt);
- }
break;
default:
break;
@@ -1218,8 +1209,19 @@
sd_dif_complete(SCpnt, good_bytes);
if (scsi_host_dif_capable(sdkp->device->host, sdkp->protection_type)
- == SD_DIF_TYPE2_PROTECTION && SCpnt->cmnd != SCpnt->request->cmd)
+ == SD_DIF_TYPE2_PROTECTION && SCpnt->cmnd != SCpnt->request->cmd) {
+
+ /* We have to print a failed command here as the
+ * extended CDB gets freed before scsi_io_completion()
+ * is called.
+ */
+ if (result)
+ scsi_print_command(SCpnt);
+
mempool_free(SCpnt->cmnd, sd_cdb_pool);
+ SCpnt->cmnd = NULL;
+ SCpnt->cmd_len = 0;
+ }
return good_bytes;
}
@@ -1946,13 +1948,13 @@
{
struct request_queue *q = sdkp->disk->queue;
unsigned int sector_sz = sdkp->device->sector_size;
- char *buffer;
+ const int vpd_len = 32;
+ unsigned char *buffer = kmalloc(vpd_len, GFP_KERNEL);
- /* Block Limits VPD */
- buffer = scsi_get_vpd_page(sdkp->device, 0xb0);
-
- if (buffer == NULL)
- return;
+ if (!buffer ||
+ /* Block Limits VPD */
+ scsi_get_vpd_page(sdkp->device, 0xb0, buffer, vpd_len))
+ goto out;
blk_queue_io_min(sdkp->disk->queue,
get_unaligned_be16(&buffer[6]) * sector_sz);
@@ -1984,6 +1986,7 @@
get_unaligned_be32(&buffer[32]) & ~(1 << 31);
}
+ out:
kfree(buffer);
}
@@ -1993,20 +1996,23 @@
*/
static void sd_read_block_characteristics(struct scsi_disk *sdkp)
{
- char *buffer;
+ unsigned char *buffer;
u16 rot;
+ const int vpd_len = 32;
- /* Block Device Characteristics VPD */
- buffer = scsi_get_vpd_page(sdkp->device, 0xb1);
+ buffer = kmalloc(vpd_len, GFP_KERNEL);
- if (buffer == NULL)
- return;
+ if (!buffer ||
+ /* Block Device Characteristics VPD */
+ scsi_get_vpd_page(sdkp->device, 0xb1, buffer, vpd_len))
+ goto out;
rot = get_unaligned_be16(&buffer[4]);
if (rot == 1)
queue_flag_set_unlocked(QUEUE_FLAG_NONROT, sdkp->disk->queue);
+ out:
kfree(buffer);
}
diff --git a/drivers/scsi/ses.c b/drivers/scsi/ses.c
index 55b034b..1d7a878 100644
--- a/drivers/scsi/ses.c
+++ b/drivers/scsi/ses.c
@@ -448,13 +448,17 @@
.addr = 0,
};
- buf = scsi_get_vpd_page(sdev, 0x83);
- if (!buf)
- return;
+ buf = kmalloc(INIT_ALLOC_SIZE, GFP_KERNEL);
+ if (!buf || scsi_get_vpd_page(sdev, 0x83, buf, INIT_ALLOC_SIZE))
+ goto free;
ses_enclosure_data_process(edev, to_scsi_device(edev->edev.parent), 0);
vpd_len = ((buf[2] << 8) | buf[3]) + 4;
+ kfree(buf);
+ buf = kmalloc(vpd_len, GFP_KERNEL);
+ if (!buf ||scsi_get_vpd_page(sdev, 0x83, buf, vpd_len))
+ goto free;
desc = buf + 4;
while (desc < buf + vpd_len) {
diff --git a/drivers/scsi/u14-34f.c b/drivers/scsi/u14-34f.c
index 54023d41..26e8e0e 100644
--- a/drivers/scsi/u14-34f.c
+++ b/drivers/scsi/u14-34f.c
@@ -1070,7 +1070,7 @@
char *cur = str;
int i = 1;
- while (cur && isdigit(*cur) && i <= MAX_INT_PARAM) {
+ while (cur && isdigit(*cur) && i < MAX_INT_PARAM) {
ints[i++] = simple_strtoul(cur, NULL, 0);
if ((cur = strchr(cur, ',')) != NULL) cur++;
diff --git a/drivers/scsi/vmw_pvscsi.c b/drivers/scsi/vmw_pvscsi.c
index d2604c8..e4ac582 100644
--- a/drivers/scsi/vmw_pvscsi.c
+++ b/drivers/scsi/vmw_pvscsi.c
@@ -1069,7 +1069,8 @@
free_pages((unsigned long)ctx->sgl, get_order(SGL_SIZE));
}
-static int pvscsi_setup_msix(const struct pvscsi_adapter *adapter, int *irq)
+static int pvscsi_setup_msix(const struct pvscsi_adapter *adapter,
+ unsigned int *irq)
{
struct msix_entry entry = { 0, PVSCSI_VECTOR_COMPLETION };
int ret;
diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c
index 683e66f..3e2ae48 100644
--- a/drivers/serial/pmac_zilog.c
+++ b/drivers/serial/pmac_zilog.c
@@ -2031,9 +2031,9 @@
/*
* XServe's default to 57600 bps
*/
- if (machine_is_compatible("RackMac1,1")
- || machine_is_compatible("RackMac1,2")
- || machine_is_compatible("MacRISC4"))
+ if (of_machine_is_compatible("RackMac1,1")
+ || of_machine_is_compatible("RackMac1,2")
+ || of_machine_is_compatible("MacRISC4"))
baud = 57600;
/*
diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h
index 0efcded..f7d2589 100644
--- a/drivers/serial/sh-sci.h
+++ b/drivers/serial/sh-sci.h
@@ -518,34 +518,6 @@
{
if (port->mapbase == 0xfffffe80)
return __raw_readb(SCPDR)&0x01 ? 1 : 0; /* SCI */
- if (port->mapbase == 0xa4000150)
- return __raw_readb(SCPDR)&0x10 ? 1 : 0; /* SCIF */
- if (port->mapbase == 0xa4000140)
- return __raw_readb(SCPDR)&0x04 ? 1 : 0; /* IRDA */
- return 1;
-}
-#elif defined(CONFIG_CPU_SUBTYPE_SH7705)
-static inline int sci_rxd_in(struct uart_port *port)
-{
- if (port->mapbase == SCIF0)
- return __raw_readb(SCPDR)&0x04 ? 1 : 0; /* IRDA */
- if (port->mapbase == SCIF2)
- return __raw_readb(SCPDR)&0x10 ? 1 : 0; /* SCIF */
- return 1;
-}
-#elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712)
-static inline int sci_rxd_in(struct uart_port *port)
-{
- return sci_in(port,SCxSR)&0x0010 ? 1 : 0;
-}
-#elif defined(CONFIG_CPU_SUBTYPE_SH7720) || \
- defined(CONFIG_CPU_SUBTYPE_SH7721)
-static inline int sci_rxd_in(struct uart_port *port)
-{
- if (port->mapbase == 0xa4430000)
- return sci_in(port, SCxSR) & 0x0003 ? 1 : 0;
- else if (port->mapbase == 0xa4438000)
- return sci_in(port, SCxSR) & 0x0003 ? 1 : 0;
return 1;
}
#elif defined(CONFIG_CPU_SUBTYPE_SH7750) || \
@@ -558,207 +530,17 @@
{
if (port->mapbase == 0xffe00000)
return __raw_readb(SCSPTR1)&0x01 ? 1 : 0; /* SCI */
- if (port->mapbase == 0xffe80000)
- return __raw_readw(SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */
return 1;
}
-#elif defined(CONFIG_CPU_SUBTYPE_SH4_202)
-static inline int sci_rxd_in(struct uart_port *port)
-{
- if (port->mapbase == 0xffe80000)
- return __raw_readw(SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */
- return 1;
-}
-#elif defined(CONFIG_CPU_SUBTYPE_SH7757)
-static inline int sci_rxd_in(struct uart_port *port)
-{
- if (port->mapbase == 0xfe4b0000)
- return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0;
- if (port->mapbase == 0xfe4c0000)
- return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0;
- if (port->mapbase == 0xfe4d0000)
- return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0;
-}
-#elif defined(CONFIG_CPU_SUBTYPE_SH7760)
-static inline int sci_rxd_in(struct uart_port *port)
-{
- if (port->mapbase == 0xfe600000)
- return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
- if (port->mapbase == 0xfe610000)
- return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
- if (port->mapbase == 0xfe620000)
- return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
- return 1;
-}
-#elif defined(CONFIG_CPU_SUBTYPE_SH7343)
-static inline int sci_rxd_in(struct uart_port *port)
-{
- if (port->mapbase == 0xffe00000)
- return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
- if (port->mapbase == 0xffe10000)
- return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
- if (port->mapbase == 0xffe20000)
- return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
- if (port->mapbase == 0xffe30000)
- return __raw_readw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */
- return 1;
-}
-#elif defined(CONFIG_CPU_SUBTYPE_SH7366)
-static inline int sci_rxd_in(struct uart_port *port)
-{
- if (port->mapbase == 0xffe00000)
- return __raw_readb(SCPDR0) & 0x0001 ? 1 : 0; /* SCIF0 */
- return 1;
-}
-#elif defined(CONFIG_CPU_SUBTYPE_SH7722)
-static inline int sci_rxd_in(struct uart_port *port)
-{
- if (port->mapbase == 0xffe00000)
- return __raw_readb(PSDR) & 0x02 ? 1 : 0; /* SCIF0 */
- if (port->mapbase == 0xffe10000)
- return __raw_readb(PADR) & 0x40 ? 1 : 0; /* SCIF1 */
- if (port->mapbase == 0xffe20000)
- return __raw_readb(PWDR) & 0x04 ? 1 : 0; /* SCIF2 */
-
- return 1;
-}
-#elif defined(CONFIG_CPU_SUBTYPE_SH7723)
-static inline int sci_rxd_in(struct uart_port *port)
-{
- if (port->mapbase == 0xffe00000)
- return __raw_readb(SCSPTR0) & 0x0008 ? 1 : 0; /* SCIF0 */
- if (port->mapbase == 0xffe10000)
- return __raw_readb(SCSPTR1) & 0x0020 ? 1 : 0; /* SCIF1 */
- if (port->mapbase == 0xffe20000)
- return __raw_readb(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF2 */
- if (port->mapbase == 0xa4e30000)
- return __raw_readb(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF3 */
- if (port->mapbase == 0xa4e40000)
- return __raw_readb(SCSPTR4) & 0x0001 ? 1 : 0; /* SCIF4 */
- if (port->mapbase == 0xa4e50000)
- return __raw_readb(SCSPTR5) & 0x0008 ? 1 : 0; /* SCIF5 */
- return 1;
-}
-#elif defined(CONFIG_CPU_SUBTYPE_SH7724)
-# define SCFSR 0x0010
-# define SCASSR 0x0014
-static inline int sci_rxd_in(struct uart_port *port)
-{
- if (port->type == PORT_SCIF)
- return __raw_readw((port->mapbase + SCFSR)) & SCIF_BRK ? 1 : 0;
- if (port->type == PORT_SCIFA)
- return __raw_readw((port->mapbase + SCASSR)) & SCIF_BRK ? 1 : 0;
- return 1;
-}
-#elif defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103)
-static inline int sci_rxd_in(struct uart_port *port)
-{
- return sci_in(port, SCSPTR)&0x0001 ? 1 : 0; /* SCIF */
-}
#elif defined(__H8300H__) || defined(__H8300S__)
static inline int sci_rxd_in(struct uart_port *port)
{
int ch = (port->mapbase - SMR0) >> 3;
return (H8300_SCI_DR(ch) & h8300_sci_pins[ch].rx) ? 1 : 0;
}
-#elif defined(CONFIG_CPU_SUBTYPE_SH7763)
+#else /* default case for non-SCI processors */
static inline int sci_rxd_in(struct uart_port *port)
{
- if (port->mapbase == 0xffe00000)
- return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
- if (port->mapbase == 0xffe08000)
- return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
- if (port->mapbase == 0xffe10000)
- return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF/IRDA */
-
- return 1;
-}
-#elif defined(CONFIG_CPU_SUBTYPE_SH7770)
-static inline int sci_rxd_in(struct uart_port *port)
-{
- if (port->mapbase == 0xff923000)
- return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
- if (port->mapbase == 0xff924000)
- return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
- if (port->mapbase == 0xff925000)
- return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
- return 1;
-}
-#elif defined(CONFIG_CPU_SUBTYPE_SH7780)
-static inline int sci_rxd_in(struct uart_port *port)
-{
- if (port->mapbase == 0xffe00000)
- return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
- if (port->mapbase == 0xffe10000)
- return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
- return 1;
-}
-#elif defined(CONFIG_CPU_SUBTYPE_SH7785) || \
- defined(CONFIG_CPU_SUBTYPE_SH7786)
-static inline int sci_rxd_in(struct uart_port *port)
-{
- if (port->mapbase == 0xffea0000)
- return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
- if (port->mapbase == 0xffeb0000)
- return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
- if (port->mapbase == 0xffec0000)
- return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
- if (port->mapbase == 0xffed0000)
- return __raw_readw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */
- if (port->mapbase == 0xffee0000)
- return __raw_readw(SCSPTR4) & 0x0001 ? 1 : 0; /* SCIF */
- if (port->mapbase == 0xffef0000)
- return __raw_readw(SCSPTR5) & 0x0001 ? 1 : 0; /* SCIF */
- return 1;
-}
-#elif defined(CONFIG_CPU_SUBTYPE_SH7201) || \
- defined(CONFIG_CPU_SUBTYPE_SH7203) || \
- defined(CONFIG_CPU_SUBTYPE_SH7206) || \
- defined(CONFIG_CPU_SUBTYPE_SH7263)
-static inline int sci_rxd_in(struct uart_port *port)
-{
- if (port->mapbase == 0xfffe8000)
- return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
- if (port->mapbase == 0xfffe8800)
- return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
- if (port->mapbase == 0xfffe9000)
- return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
- if (port->mapbase == 0xfffe9800)
- return __raw_readw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */
-#if defined(CONFIG_CPU_SUBTYPE_SH7201)
- if (port->mapbase == 0xfffeA000)
- return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
- if (port->mapbase == 0xfffeA800)
- return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
- if (port->mapbase == 0xfffeB000)
- return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
- if (port->mapbase == 0xfffeB800)
- return __raw_readw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */
-#endif
- return 1;
-}
-#elif defined(CONFIG_CPU_SUBTYPE_SH7619)
-static inline int sci_rxd_in(struct uart_port *port)
-{
- if (port->mapbase == 0xf8400000)
- return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
- if (port->mapbase == 0xf8410000)
- return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
- if (port->mapbase == 0xf8420000)
- return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
- return 1;
-}
-#elif defined(CONFIG_CPU_SUBTYPE_SHX3)
-static inline int sci_rxd_in(struct uart_port *port)
-{
- if (port->mapbase == 0xffc30000)
- return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
- if (port->mapbase == 0xffc40000)
- return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
- if (port->mapbase == 0xffc50000)
- return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
- if (port->mapbase == 0xffc60000)
- return __raw_readw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */
return 1;
}
#endif
diff --git a/drivers/sh/intc.c b/drivers/sh/intc.c
index d5d7f23..3a5a17d 100644
--- a/drivers/sh/intc.c
+++ b/drivers/sh/intc.c
@@ -259,6 +259,43 @@
}
}
+static void (*intc_enable_noprio_fns[])(unsigned long addr,
+ unsigned long handle,
+ void (*fn)(unsigned long,
+ unsigned long,
+ unsigned long),
+ unsigned int irq) = {
+ [MODE_ENABLE_REG] = intc_mode_field,
+ [MODE_MASK_REG] = intc_mode_zero,
+ [MODE_DUAL_REG] = intc_mode_field,
+ [MODE_PRIO_REG] = intc_mode_field,
+ [MODE_PCLR_REG] = intc_mode_field,
+};
+
+static void intc_enable_disable(struct intc_desc_int *d,
+ unsigned long handle, int do_enable)
+{
+ unsigned long addr;
+ unsigned int cpu;
+ void (*fn)(unsigned long, unsigned long,
+ void (*)(unsigned long, unsigned long, unsigned long),
+ unsigned int);
+
+ if (do_enable) {
+ for (cpu = 0; cpu < SMP_NR(d, _INTC_ADDR_E(handle)); cpu++) {
+ addr = INTC_REG(d, _INTC_ADDR_E(handle), cpu);
+ fn = intc_enable_noprio_fns[_INTC_MODE(handle)];
+ fn(addr, handle, intc_reg_fns[_INTC_FN(handle)], 0);
+ }
+ } else {
+ for (cpu = 0; cpu < SMP_NR(d, _INTC_ADDR_D(handle)); cpu++) {
+ addr = INTC_REG(d, _INTC_ADDR_D(handle), cpu);
+ fn = intc_disable_fns[_INTC_MODE(handle)];
+ fn(addr, handle, intc_reg_fns[_INTC_FN(handle)], 0);
+ }
+ }
+}
+
static int intc_set_wake(unsigned int irq, unsigned int on)
{
return 0; /* allow wakeup, but setup hardware in intc_suspend() */
@@ -400,11 +437,11 @@
static intc_enum __init intc_grp_id(struct intc_desc *desc,
intc_enum enum_id)
{
- struct intc_group *g = desc->groups;
+ struct intc_group *g = desc->hw.groups;
unsigned int i, j;
- for (i = 0; g && enum_id && i < desc->nr_groups; i++) {
- g = desc->groups + i;
+ for (i = 0; g && enum_id && i < desc->hw.nr_groups; i++) {
+ g = desc->hw.groups + i;
for (j = 0; g->enum_ids[j]; j++) {
if (g->enum_ids[j] != enum_id)
@@ -417,19 +454,21 @@
return 0;
}
-static unsigned int __init intc_mask_data(struct intc_desc *desc,
- struct intc_desc_int *d,
- intc_enum enum_id, int do_grps)
+static unsigned int __init _intc_mask_data(struct intc_desc *desc,
+ struct intc_desc_int *d,
+ intc_enum enum_id,
+ unsigned int *reg_idx,
+ unsigned int *fld_idx)
{
- struct intc_mask_reg *mr = desc->mask_regs;
- unsigned int i, j, fn, mode;
+ struct intc_mask_reg *mr = desc->hw.mask_regs;
+ unsigned int fn, mode;
unsigned long reg_e, reg_d;
- for (i = 0; mr && enum_id && i < desc->nr_mask_regs; i++) {
- mr = desc->mask_regs + i;
+ while (mr && enum_id && *reg_idx < desc->hw.nr_mask_regs) {
+ mr = desc->hw.mask_regs + *reg_idx;
- for (j = 0; j < ARRAY_SIZE(mr->enum_ids); j++) {
- if (mr->enum_ids[j] != enum_id)
+ for (; *fld_idx < ARRAY_SIZE(mr->enum_ids); (*fld_idx)++) {
+ if (mr->enum_ids[*fld_idx] != enum_id)
continue;
if (mr->set_reg && mr->clr_reg) {
@@ -455,29 +494,49 @@
intc_get_reg(d, reg_e),
intc_get_reg(d, reg_d),
1,
- (mr->reg_width - 1) - j);
+ (mr->reg_width - 1) - *fld_idx);
}
+
+ *fld_idx = 0;
+ (*reg_idx)++;
}
+ return 0;
+}
+
+static unsigned int __init intc_mask_data(struct intc_desc *desc,
+ struct intc_desc_int *d,
+ intc_enum enum_id, int do_grps)
+{
+ unsigned int i = 0;
+ unsigned int j = 0;
+ unsigned int ret;
+
+ ret = _intc_mask_data(desc, d, enum_id, &i, &j);
+ if (ret)
+ return ret;
+
if (do_grps)
return intc_mask_data(desc, d, intc_grp_id(desc, enum_id), 0);
return 0;
}
-static unsigned int __init intc_prio_data(struct intc_desc *desc,
- struct intc_desc_int *d,
- intc_enum enum_id, int do_grps)
+static unsigned int __init _intc_prio_data(struct intc_desc *desc,
+ struct intc_desc_int *d,
+ intc_enum enum_id,
+ unsigned int *reg_idx,
+ unsigned int *fld_idx)
{
- struct intc_prio_reg *pr = desc->prio_regs;
- unsigned int i, j, fn, mode, bit;
+ struct intc_prio_reg *pr = desc->hw.prio_regs;
+ unsigned int fn, n, mode, bit;
unsigned long reg_e, reg_d;
- for (i = 0; pr && enum_id && i < desc->nr_prio_regs; i++) {
- pr = desc->prio_regs + i;
+ while (pr && enum_id && *reg_idx < desc->hw.nr_prio_regs) {
+ pr = desc->hw.prio_regs + *reg_idx;
- for (j = 0; j < ARRAY_SIZE(pr->enum_ids); j++) {
- if (pr->enum_ids[j] != enum_id)
+ for (; *fld_idx < ARRAY_SIZE(pr->enum_ids); (*fld_idx)++) {
+ if (pr->enum_ids[*fld_idx] != enum_id)
continue;
if (pr->set_reg && pr->clr_reg) {
@@ -495,34 +554,79 @@
}
fn += (pr->reg_width >> 3) - 1;
+ n = *fld_idx + 1;
- BUG_ON((j + 1) * pr->field_width > pr->reg_width);
+ BUG_ON(n * pr->field_width > pr->reg_width);
- bit = pr->reg_width - ((j + 1) * pr->field_width);
+ bit = pr->reg_width - (n * pr->field_width);
return _INTC_MK(fn, mode,
intc_get_reg(d, reg_e),
intc_get_reg(d, reg_d),
pr->field_width, bit);
}
+
+ *fld_idx = 0;
+ (*reg_idx)++;
}
+ return 0;
+}
+
+static unsigned int __init intc_prio_data(struct intc_desc *desc,
+ struct intc_desc_int *d,
+ intc_enum enum_id, int do_grps)
+{
+ unsigned int i = 0;
+ unsigned int j = 0;
+ unsigned int ret;
+
+ ret = _intc_prio_data(desc, d, enum_id, &i, &j);
+ if (ret)
+ return ret;
+
if (do_grps)
return intc_prio_data(desc, d, intc_grp_id(desc, enum_id), 0);
return 0;
}
+static void __init intc_enable_disable_enum(struct intc_desc *desc,
+ struct intc_desc_int *d,
+ intc_enum enum_id, int enable)
+{
+ unsigned int i, j, data;
+
+ /* go through and enable/disable all mask bits */
+ i = j = 0;
+ do {
+ data = _intc_mask_data(desc, d, enum_id, &i, &j);
+ if (data)
+ intc_enable_disable(d, data, enable);
+ j++;
+ } while (data);
+
+ /* go through and enable/disable all priority fields */
+ i = j = 0;
+ do {
+ data = _intc_prio_data(desc, d, enum_id, &i, &j);
+ if (data)
+ intc_enable_disable(d, data, enable);
+
+ j++;
+ } while (data);
+}
+
static unsigned int __init intc_ack_data(struct intc_desc *desc,
struct intc_desc_int *d,
intc_enum enum_id)
{
- struct intc_mask_reg *mr = desc->ack_regs;
+ struct intc_mask_reg *mr = desc->hw.ack_regs;
unsigned int i, j, fn, mode;
unsigned long reg_e, reg_d;
- for (i = 0; mr && enum_id && i < desc->nr_ack_regs; i++) {
- mr = desc->ack_regs + i;
+ for (i = 0; mr && enum_id && i < desc->hw.nr_ack_regs; i++) {
+ mr = desc->hw.ack_regs + i;
for (j = 0; j < ARRAY_SIZE(mr->enum_ids); j++) {
if (mr->enum_ids[j] != enum_id)
@@ -549,11 +653,11 @@
struct intc_desc_int *d,
intc_enum enum_id)
{
- struct intc_sense_reg *sr = desc->sense_regs;
+ struct intc_sense_reg *sr = desc->hw.sense_regs;
unsigned int i, j, fn, bit;
- for (i = 0; sr && enum_id && i < desc->nr_sense_regs; i++) {
- sr = desc->sense_regs + i;
+ for (i = 0; sr && enum_id && i < desc->hw.nr_sense_regs; i++) {
+ sr = desc->hw.sense_regs + i;
for (j = 0; j < ARRAY_SIZE(sr->enum_ids); j++) {
if (sr->enum_ids[j] != enum_id)
@@ -656,7 +760,7 @@
/* irq should be disabled by default */
d->chip.mask(irq);
- if (desc->ack_regs)
+ if (desc->hw.ack_regs)
ack_handle[irq] = intc_ack_data(desc, d, enum_id);
}
@@ -684,6 +788,7 @@
void __init register_intc_controller(struct intc_desc *desc)
{
unsigned int i, k, smp;
+ struct intc_hw_desc *hw = &desc->hw;
struct intc_desc_int *d;
d = kzalloc(sizeof(*d), GFP_NOWAIT);
@@ -691,10 +796,10 @@
INIT_LIST_HEAD(&d->list);
list_add(&d->list, &intc_list);
- d->nr_reg = desc->mask_regs ? desc->nr_mask_regs * 2 : 0;
- d->nr_reg += desc->prio_regs ? desc->nr_prio_regs * 2 : 0;
- d->nr_reg += desc->sense_regs ? desc->nr_sense_regs : 0;
- d->nr_reg += desc->ack_regs ? desc->nr_ack_regs : 0;
+ d->nr_reg = hw->mask_regs ? hw->nr_mask_regs * 2 : 0;
+ d->nr_reg += hw->prio_regs ? hw->nr_prio_regs * 2 : 0;
+ d->nr_reg += hw->sense_regs ? hw->nr_sense_regs : 0;
+ d->nr_reg += hw->ack_regs ? hw->nr_ack_regs : 0;
d->reg = kzalloc(d->nr_reg * sizeof(*d->reg), GFP_NOWAIT);
#ifdef CONFIG_SMP
@@ -702,30 +807,31 @@
#endif
k = 0;
- if (desc->mask_regs) {
- for (i = 0; i < desc->nr_mask_regs; i++) {
- smp = IS_SMP(desc->mask_regs[i]);
- k += save_reg(d, k, desc->mask_regs[i].set_reg, smp);
- k += save_reg(d, k, desc->mask_regs[i].clr_reg, smp);
+ if (hw->mask_regs) {
+ for (i = 0; i < hw->nr_mask_regs; i++) {
+ smp = IS_SMP(hw->mask_regs[i]);
+ k += save_reg(d, k, hw->mask_regs[i].set_reg, smp);
+ k += save_reg(d, k, hw->mask_regs[i].clr_reg, smp);
}
}
- if (desc->prio_regs) {
- d->prio = kzalloc(desc->nr_vectors * sizeof(*d->prio), GFP_NOWAIT);
+ if (hw->prio_regs) {
+ d->prio = kzalloc(hw->nr_vectors * sizeof(*d->prio),
+ GFP_NOWAIT);
- for (i = 0; i < desc->nr_prio_regs; i++) {
- smp = IS_SMP(desc->prio_regs[i]);
- k += save_reg(d, k, desc->prio_regs[i].set_reg, smp);
- k += save_reg(d, k, desc->prio_regs[i].clr_reg, smp);
+ for (i = 0; i < hw->nr_prio_regs; i++) {
+ smp = IS_SMP(hw->prio_regs[i]);
+ k += save_reg(d, k, hw->prio_regs[i].set_reg, smp);
+ k += save_reg(d, k, hw->prio_regs[i].clr_reg, smp);
}
}
- if (desc->sense_regs) {
- d->sense = kzalloc(desc->nr_vectors * sizeof(*d->sense), GFP_NOWAIT);
+ if (hw->sense_regs) {
+ d->sense = kzalloc(hw->nr_vectors * sizeof(*d->sense),
+ GFP_NOWAIT);
- for (i = 0; i < desc->nr_sense_regs; i++) {
- k += save_reg(d, k, desc->sense_regs[i].reg, 0);
- }
+ for (i = 0; i < hw->nr_sense_regs; i++)
+ k += save_reg(d, k, hw->sense_regs[i].reg, 0);
}
d->chip.name = desc->name;
@@ -738,18 +844,26 @@
d->chip.set_type = intc_set_sense;
d->chip.set_wake = intc_set_wake;
- if (desc->ack_regs) {
- for (i = 0; i < desc->nr_ack_regs; i++)
- k += save_reg(d, k, desc->ack_regs[i].set_reg, 0);
+ if (hw->ack_regs) {
+ for (i = 0; i < hw->nr_ack_regs; i++)
+ k += save_reg(d, k, hw->ack_regs[i].set_reg, 0);
d->chip.mask_ack = intc_mask_ack;
}
+ /* disable bits matching force_disable before registering irqs */
+ if (desc->force_disable)
+ intc_enable_disable_enum(desc, d, desc->force_disable, 0);
+
+ /* disable bits matching force_enable before registering irqs */
+ if (desc->force_enable)
+ intc_enable_disable_enum(desc, d, desc->force_enable, 0);
+
BUG_ON(k > 256); /* _INTC_ADDR_E() and _INTC_ADDR_D() are 8 bits */
/* register the vectors one by one */
- for (i = 0; i < desc->nr_vectors; i++) {
- struct intc_vect *vect = desc->vectors + i;
+ for (i = 0; i < hw->nr_vectors; i++) {
+ struct intc_vect *vect = hw->vectors + i;
unsigned int irq = evt2irq(vect->vect);
struct irq_desc *irq_desc;
@@ -764,8 +878,8 @@
intc_register_irq(desc, d, vect->enum_id, irq);
- for (k = i + 1; k < desc->nr_vectors; k++) {
- struct intc_vect *vect2 = desc->vectors + k;
+ for (k = i + 1; k < hw->nr_vectors; k++) {
+ struct intc_vect *vect2 = hw->vectors + k;
unsigned int irq2 = evt2irq(vect2->vect);
if (vect->enum_id != vect2->enum_id)
@@ -785,11 +899,15 @@
vect2->enum_id = 0;
/* redirect this interrupts to the first one */
- set_irq_chip_and_handler_name(irq2, &d->chip,
- intc_redirect_irq, "redirect");
+ set_irq_chip(irq2, &dummy_irq_chip);
+ set_irq_chained_handler(irq2, intc_redirect_irq);
set_irq_data(irq2, (void *)irq);
}
}
+
+ /* enable bits matching force_enable after registering irqs */
+ if (desc->force_enable)
+ intc_enable_disable_enum(desc, d, desc->force_enable, 1);
}
static int intc_suspend(struct sys_device *dev, pm_message_t state)
@@ -872,7 +990,7 @@
/*
* Dynamic IRQ allocation and deallocation
*/
-static unsigned int create_irq_on_node(unsigned int irq_want, int node)
+unsigned int create_irq_nr(unsigned int irq_want, int node)
{
unsigned int irq = 0, new;
unsigned long flags;
@@ -881,24 +999,28 @@
spin_lock_irqsave(&vector_lock, flags);
/*
- * First try the wanted IRQ, then scan.
+ * First try the wanted IRQ
*/
- if (test_and_set_bit(irq_want, intc_irq_map)) {
+ if (test_and_set_bit(irq_want, intc_irq_map) == 0) {
+ new = irq_want;
+ } else {
+ /* .. then fall back to scanning. */
new = find_first_zero_bit(intc_irq_map, nr_irqs);
if (unlikely(new == nr_irqs))
goto out_unlock;
- desc = irq_to_desc_alloc_node(new, node);
- if (unlikely(!desc)) {
- pr_info("can't get irq_desc for %d\n", new);
- goto out_unlock;
- }
-
- desc = move_irq_desc(desc, node);
__set_bit(new, intc_irq_map);
- irq = new;
}
+ desc = irq_to_desc_alloc_node(new, node);
+ if (unlikely(!desc)) {
+ pr_info("can't get irq_desc for %d\n", new);
+ goto out_unlock;
+ }
+
+ desc = move_irq_desc(desc, node);
+ irq = new;
+
out_unlock:
spin_unlock_irqrestore(&vector_lock, flags);
@@ -913,7 +1035,7 @@
int nid = cpu_to_node(smp_processor_id());
int irq;
- irq = create_irq_on_node(NR_IRQS_LEGACY, nid);
+ irq = create_irq_nr(NR_IRQS_LEGACY, nid);
if (irq == 0)
irq = -1;
diff --git a/drivers/sh/pfc.c b/drivers/sh/pfc.c
index 082604e..cf0303ac 100644
--- a/drivers/sh/pfc.c
+++ b/drivers/sh/pfc.c
@@ -337,12 +337,39 @@
if (!enum_id)
break;
+ /* first check if this is a function enum */
in_range = enum_in_range(enum_id, &gpioc->function);
- if (!in_range && range) {
- in_range = enum_in_range(enum_id, range);
+ if (!in_range) {
+ /* not a function enum */
+ if (range) {
+ /*
+ * other range exists, so this pin is
+ * a regular GPIO pin that now is being
+ * bound to a specific direction.
+ *
+ * for this case we only allow function enums
+ * and the enums that match the other range.
+ */
+ in_range = enum_in_range(enum_id, range);
- if (in_range && enum_id == range->force)
- continue;
+ /*
+ * special case pass through for fixed
+ * input-only or output-only pins without
+ * function enum register association.
+ */
+ if (in_range && enum_id == range->force)
+ continue;
+ } else {
+ /*
+ * no other range exists, so this pin
+ * must then be of the function type.
+ *
+ * allow function type pins to select
+ * any combination of function/in/out
+ * in their MARK lists.
+ */
+ in_range = 1;
+ }
}
if (!in_range)
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index f55eb01..0fee95c 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -100,6 +100,23 @@
inexpensive battery powered microcontroller evaluation board.
This same cable can be used to flash new firmware.
+config SPI_COLDFIRE_QSPI
+ tristate "Freescale Coldfire QSPI controller"
+ depends on (M520x || M523x || M5249 || M527x || M528x || M532x)
+ help
+ This enables support for the Coldfire QSPI controller in master
+ mode.
+
+ This driver can also be built as a module. If so, the module
+ will be called coldfire_qspi.
+
+config SPI_DAVINCI
+ tristate "SPI controller driver for DaVinci/DA8xx SoC's"
+ depends on SPI_MASTER && ARCH_DAVINCI
+ select SPI_BITBANG
+ help
+ SPI master controller for DaVinci and DA8xx SPI modules.
+
config SPI_GPIO
tristate "GPIO-based bitbanging SPI Master"
depends on GENERIC_GPIO
@@ -308,7 +325,7 @@
#
config SPI_DESIGNWARE
- bool "DesignWare SPI controller core support"
+ tristate "DesignWare SPI controller core support"
depends on SPI_MASTER
help
general driver for SPI controller core from DesignWare
@@ -317,6 +334,10 @@
tristate "PCI interface driver for DW SPI core"
depends on SPI_DESIGNWARE && PCI
+config SPI_DW_MMIO
+ tristate "Memory-mapped io interface driver for DW SPI core"
+ depends on SPI_DESIGNWARE && HAVE_CLK
+
#
# There are lots of SPI device types, with sensors and memory
# being probably the most widely used ones.
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index f3d2810..d7d0f89 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -16,8 +16,11 @@
obj-$(CONFIG_SPI_BITBANG) += spi_bitbang.o
obj-$(CONFIG_SPI_AU1550) += au1550_spi.o
obj-$(CONFIG_SPI_BUTTERFLY) += spi_butterfly.o
+obj-$(CONFIG_SPI_COLDFIRE_QSPI) += coldfire_qspi.o
+obj-$(CONFIG_SPI_DAVINCI) += davinci_spi.o
obj-$(CONFIG_SPI_DESIGNWARE) += dw_spi.o
obj-$(CONFIG_SPI_DW_PCI) += dw_spi_pci.o
+obj-$(CONFIG_SPI_DW_MMIO) += dw_spi_mmio.o
obj-$(CONFIG_SPI_GPIO) += spi_gpio.o
obj-$(CONFIG_SPI_IMX) += spi_imx.o
obj-$(CONFIG_SPI_LM70_LLP) += spi_lm70llp.o
diff --git a/drivers/spi/coldfire_qspi.c b/drivers/spi/coldfire_qspi.c
new file mode 100644
index 0000000..59be3ef
--- /dev/null
+++ b/drivers/spi/coldfire_qspi.c
@@ -0,0 +1,640 @@
+/*
+ * Freescale/Motorola Coldfire Queued SPI driver
+ *
+ * Copyright 2010 Steven King <sfking@fdwdc.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/errno.h>
+#include <linux/platform_device.h>
+#include <linux/workqueue.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/spi/spi.h>
+
+#include <asm/coldfire.h>
+#include <asm/mcfqspi.h>
+
+#define DRIVER_NAME "mcfqspi"
+
+#define MCFQSPI_BUSCLK (MCF_BUSCLK / 2)
+
+#define MCFQSPI_QMR 0x00
+#define MCFQSPI_QMR_MSTR 0x8000
+#define MCFQSPI_QMR_CPOL 0x0200
+#define MCFQSPI_QMR_CPHA 0x0100
+#define MCFQSPI_QDLYR 0x04
+#define MCFQSPI_QDLYR_SPE 0x8000
+#define MCFQSPI_QWR 0x08
+#define MCFQSPI_QWR_HALT 0x8000
+#define MCFQSPI_QWR_WREN 0x4000
+#define MCFQSPI_QWR_CSIV 0x1000
+#define MCFQSPI_QIR 0x0C
+#define MCFQSPI_QIR_WCEFB 0x8000
+#define MCFQSPI_QIR_ABRTB 0x4000
+#define MCFQSPI_QIR_ABRTL 0x1000
+#define MCFQSPI_QIR_WCEFE 0x0800
+#define MCFQSPI_QIR_ABRTE 0x0400
+#define MCFQSPI_QIR_SPIFE 0x0100
+#define MCFQSPI_QIR_WCEF 0x0008
+#define MCFQSPI_QIR_ABRT 0x0004
+#define MCFQSPI_QIR_SPIF 0x0001
+#define MCFQSPI_QAR 0x010
+#define MCFQSPI_QAR_TXBUF 0x00
+#define MCFQSPI_QAR_RXBUF 0x10
+#define MCFQSPI_QAR_CMDBUF 0x20
+#define MCFQSPI_QDR 0x014
+#define MCFQSPI_QCR 0x014
+#define MCFQSPI_QCR_CONT 0x8000
+#define MCFQSPI_QCR_BITSE 0x4000
+#define MCFQSPI_QCR_DT 0x2000
+
+struct mcfqspi {
+ void __iomem *iobase;
+ int irq;
+ struct clk *clk;
+ struct mcfqspi_cs_control *cs_control;
+
+ wait_queue_head_t waitq;
+
+ struct work_struct work;
+ struct workqueue_struct *workq;
+ spinlock_t lock;
+ struct list_head msgq;
+};
+
+static void mcfqspi_wr_qmr(struct mcfqspi *mcfqspi, u16 val)
+{
+ writew(val, mcfqspi->iobase + MCFQSPI_QMR);
+}
+
+static void mcfqspi_wr_qdlyr(struct mcfqspi *mcfqspi, u16 val)
+{
+ writew(val, mcfqspi->iobase + MCFQSPI_QDLYR);
+}
+
+static u16 mcfqspi_rd_qdlyr(struct mcfqspi *mcfqspi)
+{
+ return readw(mcfqspi->iobase + MCFQSPI_QDLYR);
+}
+
+static void mcfqspi_wr_qwr(struct mcfqspi *mcfqspi, u16 val)
+{
+ writew(val, mcfqspi->iobase + MCFQSPI_QWR);
+}
+
+static void mcfqspi_wr_qir(struct mcfqspi *mcfqspi, u16 val)
+{
+ writew(val, mcfqspi->iobase + MCFQSPI_QIR);
+}
+
+static void mcfqspi_wr_qar(struct mcfqspi *mcfqspi, u16 val)
+{
+ writew(val, mcfqspi->iobase + MCFQSPI_QAR);
+}
+
+static void mcfqspi_wr_qdr(struct mcfqspi *mcfqspi, u16 val)
+{
+ writew(val, mcfqspi->iobase + MCFQSPI_QDR);
+}
+
+static u16 mcfqspi_rd_qdr(struct mcfqspi *mcfqspi)
+{
+ return readw(mcfqspi->iobase + MCFQSPI_QDR);
+}
+
+static void mcfqspi_cs_select(struct mcfqspi *mcfqspi, u8 chip_select,
+ bool cs_high)
+{
+ mcfqspi->cs_control->select(mcfqspi->cs_control, chip_select, cs_high);
+}
+
+static void mcfqspi_cs_deselect(struct mcfqspi *mcfqspi, u8 chip_select,
+ bool cs_high)
+{
+ mcfqspi->cs_control->deselect(mcfqspi->cs_control, chip_select, cs_high);
+}
+
+static int mcfqspi_cs_setup(struct mcfqspi *mcfqspi)
+{
+ return (mcfqspi->cs_control && mcfqspi->cs_control->setup) ?
+ mcfqspi->cs_control->setup(mcfqspi->cs_control) : 0;
+}
+
+static void mcfqspi_cs_teardown(struct mcfqspi *mcfqspi)
+{
+ if (mcfqspi->cs_control && mcfqspi->cs_control->teardown)
+ mcfqspi->cs_control->teardown(mcfqspi->cs_control);
+}
+
+static u8 mcfqspi_qmr_baud(u32 speed_hz)
+{
+ return clamp((MCFQSPI_BUSCLK + speed_hz - 1) / speed_hz, 2u, 255u);
+}
+
+static bool mcfqspi_qdlyr_spe(struct mcfqspi *mcfqspi)
+{
+ return mcfqspi_rd_qdlyr(mcfqspi) & MCFQSPI_QDLYR_SPE;
+}
+
+static irqreturn_t mcfqspi_irq_handler(int this_irq, void *dev_id)
+{
+ struct mcfqspi *mcfqspi = dev_id;
+
+ /* clear interrupt */
+ mcfqspi_wr_qir(mcfqspi, MCFQSPI_QIR_SPIFE | MCFQSPI_QIR_SPIF);
+ wake_up(&mcfqspi->waitq);
+
+ return IRQ_HANDLED;
+}
+
+static void mcfqspi_transfer_msg8(struct mcfqspi *mcfqspi, unsigned count,
+ const u8 *txbuf, u8 *rxbuf)
+{
+ unsigned i, n, offset = 0;
+
+ n = min(count, 16u);
+
+ mcfqspi_wr_qar(mcfqspi, MCFQSPI_QAR_CMDBUF);
+ for (i = 0; i < n; ++i)
+ mcfqspi_wr_qdr(mcfqspi, MCFQSPI_QCR_BITSE);
+
+ mcfqspi_wr_qar(mcfqspi, MCFQSPI_QAR_TXBUF);
+ if (txbuf)
+ for (i = 0; i < n; ++i)
+ mcfqspi_wr_qdr(mcfqspi, *txbuf++);
+ else
+ for (i = 0; i < count; ++i)
+ mcfqspi_wr_qdr(mcfqspi, 0);
+
+ count -= n;
+ if (count) {
+ u16 qwr = 0xf08;
+ mcfqspi_wr_qwr(mcfqspi, 0x700);
+ mcfqspi_wr_qdlyr(mcfqspi, MCFQSPI_QDLYR_SPE);
+
+ do {
+ wait_event(mcfqspi->waitq, !mcfqspi_qdlyr_spe(mcfqspi));
+ mcfqspi_wr_qwr(mcfqspi, qwr);
+ mcfqspi_wr_qdlyr(mcfqspi, MCFQSPI_QDLYR_SPE);
+ if (rxbuf) {
+ mcfqspi_wr_qar(mcfqspi,
+ MCFQSPI_QAR_RXBUF + offset);
+ for (i = 0; i < 8; ++i)
+ *rxbuf++ = mcfqspi_rd_qdr(mcfqspi);
+ }
+ n = min(count, 8u);
+ if (txbuf) {
+ mcfqspi_wr_qar(mcfqspi,
+ MCFQSPI_QAR_TXBUF + offset);
+ for (i = 0; i < n; ++i)
+ mcfqspi_wr_qdr(mcfqspi, *txbuf++);
+ }
+ qwr = (offset ? 0x808 : 0) + ((n - 1) << 8);
+ offset ^= 8;
+ count -= n;
+ } while (count);
+ wait_event(mcfqspi->waitq, !mcfqspi_qdlyr_spe(mcfqspi));
+ mcfqspi_wr_qwr(mcfqspi, qwr);
+ mcfqspi_wr_qdlyr(mcfqspi, MCFQSPI_QDLYR_SPE);
+ if (rxbuf) {
+ mcfqspi_wr_qar(mcfqspi, MCFQSPI_QAR_RXBUF + offset);
+ for (i = 0; i < 8; ++i)
+ *rxbuf++ = mcfqspi_rd_qdr(mcfqspi);
+ offset ^= 8;
+ }
+ } else {
+ mcfqspi_wr_qwr(mcfqspi, (n - 1) << 8);
+ mcfqspi_wr_qdlyr(mcfqspi, MCFQSPI_QDLYR_SPE);
+ }
+ wait_event(mcfqspi->waitq, !mcfqspi_qdlyr_spe(mcfqspi));
+ if (rxbuf) {
+ mcfqspi_wr_qar(mcfqspi, MCFQSPI_QAR_RXBUF + offset);
+ for (i = 0; i < n; ++i)
+ *rxbuf++ = mcfqspi_rd_qdr(mcfqspi);
+ }
+}
+
+static void mcfqspi_transfer_msg16(struct mcfqspi *mcfqspi, unsigned count,
+ const u16 *txbuf, u16 *rxbuf)
+{
+ unsigned i, n, offset = 0;
+
+ n = min(count, 16u);
+
+ mcfqspi_wr_qar(mcfqspi, MCFQSPI_QAR_CMDBUF);
+ for (i = 0; i < n; ++i)
+ mcfqspi_wr_qdr(mcfqspi, MCFQSPI_QCR_BITSE);
+
+ mcfqspi_wr_qar(mcfqspi, MCFQSPI_QAR_TXBUF);
+ if (txbuf)
+ for (i = 0; i < n; ++i)
+ mcfqspi_wr_qdr(mcfqspi, *txbuf++);
+ else
+ for (i = 0; i < count; ++i)
+ mcfqspi_wr_qdr(mcfqspi, 0);
+
+ count -= n;
+ if (count) {
+ u16 qwr = 0xf08;
+ mcfqspi_wr_qwr(mcfqspi, 0x700);
+ mcfqspi_wr_qdlyr(mcfqspi, MCFQSPI_QDLYR_SPE);
+
+ do {
+ wait_event(mcfqspi->waitq, !mcfqspi_qdlyr_spe(mcfqspi));
+ mcfqspi_wr_qwr(mcfqspi, qwr);
+ mcfqspi_wr_qdlyr(mcfqspi, MCFQSPI_QDLYR_SPE);
+ if (rxbuf) {
+ mcfqspi_wr_qar(mcfqspi,
+ MCFQSPI_QAR_RXBUF + offset);
+ for (i = 0; i < 8; ++i)
+ *rxbuf++ = mcfqspi_rd_qdr(mcfqspi);
+ }
+ n = min(count, 8u);
+ if (txbuf) {
+ mcfqspi_wr_qar(mcfqspi,
+ MCFQSPI_QAR_TXBUF + offset);
+ for (i = 0; i < n; ++i)
+ mcfqspi_wr_qdr(mcfqspi, *txbuf++);
+ }
+ qwr = (offset ? 0x808 : 0x000) + ((n - 1) << 8);
+ offset ^= 8;
+ count -= n;
+ } while (count);
+ wait_event(mcfqspi->waitq, !mcfqspi_qdlyr_spe(mcfqspi));
+ mcfqspi_wr_qwr(mcfqspi, qwr);
+ mcfqspi_wr_qdlyr(mcfqspi, MCFQSPI_QDLYR_SPE);
+ if (rxbuf) {
+ mcfqspi_wr_qar(mcfqspi, MCFQSPI_QAR_RXBUF + offset);
+ for (i = 0; i < 8; ++i)
+ *rxbuf++ = mcfqspi_rd_qdr(mcfqspi);
+ offset ^= 8;
+ }
+ } else {
+ mcfqspi_wr_qwr(mcfqspi, (n - 1) << 8);
+ mcfqspi_wr_qdlyr(mcfqspi, MCFQSPI_QDLYR_SPE);
+ }
+ wait_event(mcfqspi->waitq, !mcfqspi_qdlyr_spe(mcfqspi));
+ if (rxbuf) {
+ mcfqspi_wr_qar(mcfqspi, MCFQSPI_QAR_RXBUF + offset);
+ for (i = 0; i < n; ++i)
+ *rxbuf++ = mcfqspi_rd_qdr(mcfqspi);
+ }
+}
+
+static void mcfqspi_work(struct work_struct *work)
+{
+ struct mcfqspi *mcfqspi = container_of(work, struct mcfqspi, work);
+ unsigned long flags;
+
+ spin_lock_irqsave(&mcfqspi->lock, flags);
+ while (!list_empty(&mcfqspi->msgq)) {
+ struct spi_message *msg;
+ struct spi_device *spi;
+ struct spi_transfer *xfer;
+ int status = 0;
+
+ msg = container_of(mcfqspi->msgq.next, struct spi_message,
+ queue);
+
+ list_del_init(&mcfqspi->msgq);
+ spin_unlock_irqrestore(&mcfqspi->lock, flags);
+
+ spi = msg->spi;
+
+ list_for_each_entry(xfer, &msg->transfers, transfer_list) {
+ bool cs_high = spi->mode & SPI_CS_HIGH;
+ u16 qmr = MCFQSPI_QMR_MSTR;
+
+ if (xfer->bits_per_word)
+ qmr |= xfer->bits_per_word << 10;
+ else
+ qmr |= spi->bits_per_word << 10;
+ if (spi->mode & SPI_CPHA)
+ qmr |= MCFQSPI_QMR_CPHA;
+ if (spi->mode & SPI_CPOL)
+ qmr |= MCFQSPI_QMR_CPOL;
+ if (xfer->speed_hz)
+ qmr |= mcfqspi_qmr_baud(xfer->speed_hz);
+ else
+ qmr |= mcfqspi_qmr_baud(spi->max_speed_hz);
+ mcfqspi_wr_qmr(mcfqspi, qmr);
+
+ mcfqspi_cs_select(mcfqspi, spi->chip_select, cs_high);
+
+ mcfqspi_wr_qir(mcfqspi, MCFQSPI_QIR_SPIFE);
+ if ((xfer->bits_per_word ? xfer->bits_per_word :
+ spi->bits_per_word) == 8)
+ mcfqspi_transfer_msg8(mcfqspi, xfer->len,
+ xfer->tx_buf,
+ xfer->rx_buf);
+ else
+ mcfqspi_transfer_msg16(mcfqspi, xfer->len / 2,
+ xfer->tx_buf,
+ xfer->rx_buf);
+ mcfqspi_wr_qir(mcfqspi, 0);
+
+ if (xfer->delay_usecs)
+ udelay(xfer->delay_usecs);
+ if (xfer->cs_change) {
+ if (!list_is_last(&xfer->transfer_list,
+ &msg->transfers))
+ mcfqspi_cs_deselect(mcfqspi,
+ spi->chip_select,
+ cs_high);
+ } else {
+ if (list_is_last(&xfer->transfer_list,
+ &msg->transfers))
+ mcfqspi_cs_deselect(mcfqspi,
+ spi->chip_select,
+ cs_high);
+ }
+ msg->actual_length += xfer->len;
+ }
+ msg->status = status;
+ msg->complete(msg->context);
+
+ spin_lock_irqsave(&mcfqspi->lock, flags);
+ }
+ spin_unlock_irqrestore(&mcfqspi->lock, flags);
+}
+
+static int mcfqspi_transfer(struct spi_device *spi, struct spi_message *msg)
+{
+ struct mcfqspi *mcfqspi;
+ struct spi_transfer *xfer;
+ unsigned long flags;
+
+ mcfqspi = spi_master_get_devdata(spi->master);
+
+ list_for_each_entry(xfer, &msg->transfers, transfer_list) {
+ if (xfer->bits_per_word && ((xfer->bits_per_word < 8)
+ || (xfer->bits_per_word > 16))) {
+ dev_dbg(&spi->dev,
+ "%d bits per word is not supported\n",
+ xfer->bits_per_word);
+ goto fail;
+ }
+ if (xfer->speed_hz) {
+ u32 real_speed = MCFQSPI_BUSCLK /
+ mcfqspi_qmr_baud(xfer->speed_hz);
+ if (real_speed != xfer->speed_hz)
+ dev_dbg(&spi->dev,
+ "using speed %d instead of %d\n",
+ real_speed, xfer->speed_hz);
+ }
+ }
+ msg->status = -EINPROGRESS;
+ msg->actual_length = 0;
+
+ spin_lock_irqsave(&mcfqspi->lock, flags);
+ list_add_tail(&msg->queue, &mcfqspi->msgq);
+ queue_work(mcfqspi->workq, &mcfqspi->work);
+ spin_unlock_irqrestore(&mcfqspi->lock, flags);
+
+ return 0;
+fail:
+ msg->status = -EINVAL;
+ return -EINVAL;
+}
+
+static int mcfqspi_setup(struct spi_device *spi)
+{
+ if ((spi->bits_per_word < 8) || (spi->bits_per_word > 16)) {
+ dev_dbg(&spi->dev, "%d bits per word is not supported\n",
+ spi->bits_per_word);
+ return -EINVAL;
+ }
+ if (spi->chip_select >= spi->master->num_chipselect) {
+ dev_dbg(&spi->dev, "%d chip select is out of range\n",
+ spi->chip_select);
+ return -EINVAL;
+ }
+
+ mcfqspi_cs_deselect(spi_master_get_devdata(spi->master),
+ spi->chip_select, spi->mode & SPI_CS_HIGH);
+
+ dev_dbg(&spi->dev,
+ "bits per word %d, chip select %d, speed %d KHz\n",
+ spi->bits_per_word, spi->chip_select,
+ (MCFQSPI_BUSCLK / mcfqspi_qmr_baud(spi->max_speed_hz))
+ / 1000);
+
+ return 0;
+}
+
+static int __devinit mcfqspi_probe(struct platform_device *pdev)
+{
+ struct spi_master *master;
+ struct mcfqspi *mcfqspi;
+ struct resource *res;
+ struct mcfqspi_platform_data *pdata;
+ int status;
+
+ master = spi_alloc_master(&pdev->dev, sizeof(*mcfqspi));
+ if (master == NULL) {
+ dev_dbg(&pdev->dev, "spi_alloc_master failed\n");
+ return -ENOMEM;
+ }
+
+ mcfqspi = spi_master_get_devdata(master);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_dbg(&pdev->dev, "platform_get_resource failed\n");
+ status = -ENXIO;
+ goto fail0;
+ }
+
+ if (!request_mem_region(res->start, resource_size(res), pdev->name)) {
+ dev_dbg(&pdev->dev, "request_mem_region failed\n");
+ status = -EBUSY;
+ goto fail0;
+ }
+
+ mcfqspi->iobase = ioremap(res->start, resource_size(res));
+ if (!mcfqspi->iobase) {
+ dev_dbg(&pdev->dev, "ioremap failed\n");
+ status = -ENOMEM;
+ goto fail1;
+ }
+
+ mcfqspi->irq = platform_get_irq(pdev, 0);
+ if (mcfqspi->irq < 0) {
+ dev_dbg(&pdev->dev, "platform_get_irq failed\n");
+ status = -ENXIO;
+ goto fail2;
+ }
+
+ status = request_irq(mcfqspi->irq, mcfqspi_irq_handler, IRQF_DISABLED,
+ pdev->name, mcfqspi);
+ if (status) {
+ dev_dbg(&pdev->dev, "request_irq failed\n");
+ goto fail2;
+ }
+
+ mcfqspi->clk = clk_get(&pdev->dev, "qspi_clk");
+ if (IS_ERR(mcfqspi->clk)) {
+ dev_dbg(&pdev->dev, "clk_get failed\n");
+ status = PTR_ERR(mcfqspi->clk);
+ goto fail3;
+ }
+ clk_enable(mcfqspi->clk);
+
+ mcfqspi->workq = create_singlethread_workqueue(dev_name(master->dev.parent));
+ if (!mcfqspi->workq) {
+ dev_dbg(&pdev->dev, "create_workqueue failed\n");
+ status = -ENOMEM;
+ goto fail4;
+ }
+ INIT_WORK(&mcfqspi->work, mcfqspi_work);
+ spin_lock_init(&mcfqspi->lock);
+ INIT_LIST_HEAD(&mcfqspi->msgq);
+ init_waitqueue_head(&mcfqspi->waitq);
+
+ pdata = pdev->dev.platform_data;
+ if (!pdata) {
+ dev_dbg(&pdev->dev, "platform data is missing\n");
+ goto fail5;
+ }
+ master->bus_num = pdata->bus_num;
+ master->num_chipselect = pdata->num_chipselect;
+
+ mcfqspi->cs_control = pdata->cs_control;
+ status = mcfqspi_cs_setup(mcfqspi);
+ if (status) {
+ dev_dbg(&pdev->dev, "error initializing cs_control\n");
+ goto fail5;
+ }
+
+ master->mode_bits = SPI_CS_HIGH | SPI_CPOL | SPI_CPHA;
+ master->setup = mcfqspi_setup;
+ master->transfer = mcfqspi_transfer;
+
+ platform_set_drvdata(pdev, master);
+
+ status = spi_register_master(master);
+ if (status) {
+ dev_dbg(&pdev->dev, "spi_register_master failed\n");
+ goto fail6;
+ }
+ dev_info(&pdev->dev, "Coldfire QSPI bus driver\n");
+
+ return 0;
+
+fail6:
+ mcfqspi_cs_teardown(mcfqspi);
+fail5:
+ destroy_workqueue(mcfqspi->workq);
+fail4:
+ clk_disable(mcfqspi->clk);
+ clk_put(mcfqspi->clk);
+fail3:
+ free_irq(mcfqspi->irq, mcfqspi);
+fail2:
+ iounmap(mcfqspi->iobase);
+fail1:
+ release_mem_region(res->start, resource_size(res));
+fail0:
+ spi_master_put(master);
+
+ dev_dbg(&pdev->dev, "Coldfire QSPI probe failed\n");
+
+ return status;
+}
+
+static int __devexit mcfqspi_remove(struct platform_device *pdev)
+{
+ struct spi_master *master = platform_get_drvdata(pdev);
+ struct mcfqspi *mcfqspi = spi_master_get_devdata(master);
+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+ /* disable the hardware (set the baud rate to 0) */
+ mcfqspi_wr_qmr(mcfqspi, MCFQSPI_QMR_MSTR);
+
+ platform_set_drvdata(pdev, NULL);
+ mcfqspi_cs_teardown(mcfqspi);
+ destroy_workqueue(mcfqspi->workq);
+ clk_disable(mcfqspi->clk);
+ clk_put(mcfqspi->clk);
+ free_irq(mcfqspi->irq, mcfqspi);
+ iounmap(mcfqspi->iobase);
+ release_mem_region(res->start, resource_size(res));
+ spi_unregister_master(master);
+ spi_master_put(master);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+
+static int mcfqspi_suspend(struct device *dev)
+{
+ struct mcfqspi *mcfqspi = platform_get_drvdata(to_platform_device(dev));
+
+ clk_disable(mcfqspi->clk);
+
+ return 0;
+}
+
+static int mcfqspi_resume(struct device *dev)
+{
+ struct mcfqspi *mcfqspi = platform_get_drvdata(to_platform_device(dev));
+
+ clk_enable(mcfqspi->clk);
+
+ return 0;
+}
+
+static struct dev_pm_ops mcfqspi_dev_pm_ops = {
+ .suspend = mcfqspi_suspend,
+ .resume = mcfqspi_resume,
+};
+
+#define MCFQSPI_DEV_PM_OPS (&mcfqspi_dev_pm_ops)
+#else
+#define MCFQSPI_DEV_PM_OPS NULL
+#endif
+
+static struct platform_driver mcfqspi_driver = {
+ .driver.name = DRIVER_NAME,
+ .driver.owner = THIS_MODULE,
+ .driver.pm = MCFQSPI_DEV_PM_OPS,
+ .remove = __devexit_p(mcfqspi_remove),
+};
+
+static int __init mcfqspi_init(void)
+{
+ return platform_driver_probe(&mcfqspi_driver, mcfqspi_probe);
+}
+module_init(mcfqspi_init);
+
+static void __exit mcfqspi_exit(void)
+{
+ platform_driver_unregister(&mcfqspi_driver);
+}
+module_exit(mcfqspi_exit);
+
+MODULE_AUTHOR("Steven King <sfking@fdwdc.com>");
+MODULE_DESCRIPTION("Coldfire QSPI Controller Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRIVER_NAME);
diff --git a/drivers/spi/davinci_spi.c b/drivers/spi/davinci_spi.c
new file mode 100644
index 0000000..225ab60
--- /dev/null
+++ b/drivers/spi/davinci_spi.c
@@ -0,0 +1,1255 @@
+/*
+ * Copyright (C) 2009 Texas Instruments.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_bitbang.h>
+
+#include <mach/spi.h>
+#include <mach/edma.h>
+
+#define SPI_NO_RESOURCE ((resource_size_t)-1)
+
+#define SPI_MAX_CHIPSELECT 2
+
+#define CS_DEFAULT 0xFF
+
+#define SPI_BUFSIZ (SMP_CACHE_BYTES + 1)
+#define DAVINCI_DMA_DATA_TYPE_S8 0x01
+#define DAVINCI_DMA_DATA_TYPE_S16 0x02
+#define DAVINCI_DMA_DATA_TYPE_S32 0x04
+
+#define SPIFMT_PHASE_MASK BIT(16)
+#define SPIFMT_POLARITY_MASK BIT(17)
+#define SPIFMT_DISTIMER_MASK BIT(18)
+#define SPIFMT_SHIFTDIR_MASK BIT(20)
+#define SPIFMT_WAITENA_MASK BIT(21)
+#define SPIFMT_PARITYENA_MASK BIT(22)
+#define SPIFMT_ODD_PARITY_MASK BIT(23)
+#define SPIFMT_WDELAY_MASK 0x3f000000u
+#define SPIFMT_WDELAY_SHIFT 24
+#define SPIFMT_CHARLEN_MASK 0x0000001Fu
+
+/* SPIGCR1 */
+#define SPIGCR1_SPIENA_MASK 0x01000000u
+
+/* SPIPC0 */
+#define SPIPC0_DIFUN_MASK BIT(11) /* MISO */
+#define SPIPC0_DOFUN_MASK BIT(10) /* MOSI */
+#define SPIPC0_CLKFUN_MASK BIT(9) /* CLK */
+#define SPIPC0_SPIENA_MASK BIT(8) /* nREADY */
+#define SPIPC0_EN1FUN_MASK BIT(1)
+#define SPIPC0_EN0FUN_MASK BIT(0)
+
+#define SPIINT_MASKALL 0x0101035F
+#define SPI_INTLVL_1 0x000001FFu
+#define SPI_INTLVL_0 0x00000000u
+
+/* SPIDAT1 */
+#define SPIDAT1_CSHOLD_SHIFT 28
+#define SPIDAT1_CSNR_SHIFT 16
+#define SPIGCR1_CLKMOD_MASK BIT(1)
+#define SPIGCR1_MASTER_MASK BIT(0)
+#define SPIGCR1_LOOPBACK_MASK BIT(16)
+
+/* SPIBUF */
+#define SPIBUF_TXFULL_MASK BIT(29)
+#define SPIBUF_RXEMPTY_MASK BIT(31)
+
+/* Error Masks */
+#define SPIFLG_DLEN_ERR_MASK BIT(0)
+#define SPIFLG_TIMEOUT_MASK BIT(1)
+#define SPIFLG_PARERR_MASK BIT(2)
+#define SPIFLG_DESYNC_MASK BIT(3)
+#define SPIFLG_BITERR_MASK BIT(4)
+#define SPIFLG_OVRRUN_MASK BIT(6)
+#define SPIFLG_RX_INTR_MASK BIT(8)
+#define SPIFLG_TX_INTR_MASK BIT(9)
+#define SPIFLG_BUF_INIT_ACTIVE_MASK BIT(24)
+#define SPIFLG_MASK (SPIFLG_DLEN_ERR_MASK \
+ | SPIFLG_TIMEOUT_MASK | SPIFLG_PARERR_MASK \
+ | SPIFLG_DESYNC_MASK | SPIFLG_BITERR_MASK \
+ | SPIFLG_OVRRUN_MASK | SPIFLG_RX_INTR_MASK \
+ | SPIFLG_TX_INTR_MASK \
+ | SPIFLG_BUF_INIT_ACTIVE_MASK)
+
+#define SPIINT_DLEN_ERR_INTR BIT(0)
+#define SPIINT_TIMEOUT_INTR BIT(1)
+#define SPIINT_PARERR_INTR BIT(2)
+#define SPIINT_DESYNC_INTR BIT(3)
+#define SPIINT_BITERR_INTR BIT(4)
+#define SPIINT_OVRRUN_INTR BIT(6)
+#define SPIINT_RX_INTR BIT(8)
+#define SPIINT_TX_INTR BIT(9)
+#define SPIINT_DMA_REQ_EN BIT(16)
+#define SPIINT_ENABLE_HIGHZ BIT(24)
+
+#define SPI_T2CDELAY_SHIFT 16
+#define SPI_C2TDELAY_SHIFT 24
+
+/* SPI Controller registers */
+#define SPIGCR0 0x00
+#define SPIGCR1 0x04
+#define SPIINT 0x08
+#define SPILVL 0x0c
+#define SPIFLG 0x10
+#define SPIPC0 0x14
+#define SPIPC1 0x18
+#define SPIPC2 0x1c
+#define SPIPC3 0x20
+#define SPIPC4 0x24
+#define SPIPC5 0x28
+#define SPIPC6 0x2c
+#define SPIPC7 0x30
+#define SPIPC8 0x34
+#define SPIDAT0 0x38
+#define SPIDAT1 0x3c
+#define SPIBUF 0x40
+#define SPIEMU 0x44
+#define SPIDELAY 0x48
+#define SPIDEF 0x4c
+#define SPIFMT0 0x50
+#define SPIFMT1 0x54
+#define SPIFMT2 0x58
+#define SPIFMT3 0x5c
+#define TGINTVEC0 0x60
+#define TGINTVEC1 0x64
+
+struct davinci_spi_slave {
+ u32 cmd_to_write;
+ u32 clk_ctrl_to_write;
+ u32 bytes_per_word;
+ u8 active_cs;
+};
+
+/* We have 2 DMA channels per CS, one for RX and one for TX */
+struct davinci_spi_dma {
+ int dma_tx_channel;
+ int dma_rx_channel;
+ int dma_tx_sync_dev;
+ int dma_rx_sync_dev;
+ enum dma_event_q eventq;
+
+ struct completion dma_tx_completion;
+ struct completion dma_rx_completion;
+};
+
+/* SPI Controller driver's private data. */
+struct davinci_spi {
+ struct spi_bitbang bitbang;
+ struct clk *clk;
+
+ u8 version;
+ resource_size_t pbase;
+ void __iomem *base;
+ size_t region_size;
+ u32 irq;
+ struct completion done;
+
+ const void *tx;
+ void *rx;
+ u8 *tmp_buf;
+ int count;
+ struct davinci_spi_dma *dma_channels;
+ struct davinci_spi_platform_data *pdata;
+
+ void (*get_rx)(u32 rx_data, struct davinci_spi *);
+ u32 (*get_tx)(struct davinci_spi *);
+
+ struct davinci_spi_slave slave[SPI_MAX_CHIPSELECT];
+};
+
+static unsigned use_dma;
+
+static void davinci_spi_rx_buf_u8(u32 data, struct davinci_spi *davinci_spi)
+{
+ u8 *rx = davinci_spi->rx;
+
+ *rx++ = (u8)data;
+ davinci_spi->rx = rx;
+}
+
+static void davinci_spi_rx_buf_u16(u32 data, struct davinci_spi *davinci_spi)
+{
+ u16 *rx = davinci_spi->rx;
+
+ *rx++ = (u16)data;
+ davinci_spi->rx = rx;
+}
+
+static u32 davinci_spi_tx_buf_u8(struct davinci_spi *davinci_spi)
+{
+ u32 data;
+ const u8 *tx = davinci_spi->tx;
+
+ data = *tx++;
+ davinci_spi->tx = tx;
+ return data;
+}
+
+static u32 davinci_spi_tx_buf_u16(struct davinci_spi *davinci_spi)
+{
+ u32 data;
+ const u16 *tx = davinci_spi->tx;
+
+ data = *tx++;
+ davinci_spi->tx = tx;
+ return data;
+}
+
+static inline void set_io_bits(void __iomem *addr, u32 bits)
+{
+ u32 v = ioread32(addr);
+
+ v |= bits;
+ iowrite32(v, addr);
+}
+
+static inline void clear_io_bits(void __iomem *addr, u32 bits)
+{
+ u32 v = ioread32(addr);
+
+ v &= ~bits;
+ iowrite32(v, addr);
+}
+
+static inline void set_fmt_bits(void __iomem *addr, u32 bits, int cs_num)
+{
+ set_io_bits(addr + SPIFMT0 + (0x4 * cs_num), bits);
+}
+
+static inline void clear_fmt_bits(void __iomem *addr, u32 bits, int cs_num)
+{
+ clear_io_bits(addr + SPIFMT0 + (0x4 * cs_num), bits);
+}
+
+static void davinci_spi_set_dma_req(const struct spi_device *spi, int enable)
+{
+ struct davinci_spi *davinci_spi = spi_master_get_devdata(spi->master);
+
+ if (enable)
+ set_io_bits(davinci_spi->base + SPIINT, SPIINT_DMA_REQ_EN);
+ else
+ clear_io_bits(davinci_spi->base + SPIINT, SPIINT_DMA_REQ_EN);
+}
+
+/*
+ * Interface to control the chip select signal
+ */
+static void davinci_spi_chipselect(struct spi_device *spi, int value)
+{
+ struct davinci_spi *davinci_spi;
+ struct davinci_spi_platform_data *pdata;
+ u32 data1_reg_val = 0;
+
+ davinci_spi = spi_master_get_devdata(spi->master);
+ pdata = davinci_spi->pdata;
+
+ /*
+ * Board specific chip select logic decides the polarity and cs
+ * line for the controller
+ */
+ if (value == BITBANG_CS_INACTIVE) {
+ set_io_bits(davinci_spi->base + SPIDEF, CS_DEFAULT);
+
+ data1_reg_val |= CS_DEFAULT << SPIDAT1_CSNR_SHIFT;
+ iowrite32(data1_reg_val, davinci_spi->base + SPIDAT1);
+
+ while ((ioread32(davinci_spi->base + SPIBUF)
+ & SPIBUF_RXEMPTY_MASK) == 0)
+ cpu_relax();
+ }
+}
+
+/**
+ * davinci_spi_setup_transfer - This functions will determine transfer method
+ * @spi: spi device on which data transfer to be done
+ * @t: spi transfer in which transfer info is filled
+ *
+ * This function determines data transfer method (8/16/32 bit transfer).
+ * It will also set the SPI Clock Control register according to
+ * SPI slave device freq.
+ */
+static int davinci_spi_setup_transfer(struct spi_device *spi,
+ struct spi_transfer *t)
+{
+
+ struct davinci_spi *davinci_spi;
+ struct davinci_spi_platform_data *pdata;
+ u8 bits_per_word = 0;
+ u32 hz = 0, prescale;
+
+ davinci_spi = spi_master_get_devdata(spi->master);
+ pdata = davinci_spi->pdata;
+
+ if (t) {
+ bits_per_word = t->bits_per_word;
+ hz = t->speed_hz;
+ }
+
+ /* if bits_per_word is not set then set it default */
+ if (!bits_per_word)
+ bits_per_word = spi->bits_per_word;
+
+ /*
+ * Assign function pointer to appropriate transfer method
+ * 8bit, 16bit or 32bit transfer
+ */
+ if (bits_per_word <= 8 && bits_per_word >= 2) {
+ davinci_spi->get_rx = davinci_spi_rx_buf_u8;
+ davinci_spi->get_tx = davinci_spi_tx_buf_u8;
+ davinci_spi->slave[spi->chip_select].bytes_per_word = 1;
+ } else if (bits_per_word <= 16 && bits_per_word >= 2) {
+ davinci_spi->get_rx = davinci_spi_rx_buf_u16;
+ davinci_spi->get_tx = davinci_spi_tx_buf_u16;
+ davinci_spi->slave[spi->chip_select].bytes_per_word = 2;
+ } else
+ return -EINVAL;
+
+ if (!hz)
+ hz = spi->max_speed_hz;
+
+ clear_fmt_bits(davinci_spi->base, SPIFMT_CHARLEN_MASK,
+ spi->chip_select);
+ set_fmt_bits(davinci_spi->base, bits_per_word & 0x1f,
+ spi->chip_select);
+
+ prescale = ((clk_get_rate(davinci_spi->clk) / hz) - 1) & 0xff;
+
+ clear_fmt_bits(davinci_spi->base, 0x0000ff00, spi->chip_select);
+ set_fmt_bits(davinci_spi->base, prescale << 8, spi->chip_select);
+
+ return 0;
+}
+
+static void davinci_spi_dma_rx_callback(unsigned lch, u16 ch_status, void *data)
+{
+ struct spi_device *spi = (struct spi_device *)data;
+ struct davinci_spi *davinci_spi;
+ struct davinci_spi_dma *davinci_spi_dma;
+ struct davinci_spi_platform_data *pdata;
+
+ davinci_spi = spi_master_get_devdata(spi->master);
+ davinci_spi_dma = &(davinci_spi->dma_channels[spi->chip_select]);
+ pdata = davinci_spi->pdata;
+
+ if (ch_status == DMA_COMPLETE)
+ edma_stop(davinci_spi_dma->dma_rx_channel);
+ else
+ edma_clean_channel(davinci_spi_dma->dma_rx_channel);
+
+ complete(&davinci_spi_dma->dma_rx_completion);
+ /* We must disable the DMA RX request */
+ davinci_spi_set_dma_req(spi, 0);
+}
+
+static void davinci_spi_dma_tx_callback(unsigned lch, u16 ch_status, void *data)
+{
+ struct spi_device *spi = (struct spi_device *)data;
+ struct davinci_spi *davinci_spi;
+ struct davinci_spi_dma *davinci_spi_dma;
+ struct davinci_spi_platform_data *pdata;
+
+ davinci_spi = spi_master_get_devdata(spi->master);
+ davinci_spi_dma = &(davinci_spi->dma_channels[spi->chip_select]);
+ pdata = davinci_spi->pdata;
+
+ if (ch_status == DMA_COMPLETE)
+ edma_stop(davinci_spi_dma->dma_tx_channel);
+ else
+ edma_clean_channel(davinci_spi_dma->dma_tx_channel);
+
+ complete(&davinci_spi_dma->dma_tx_completion);
+ /* We must disable the DMA TX request */
+ davinci_spi_set_dma_req(spi, 0);
+}
+
+static int davinci_spi_request_dma(struct spi_device *spi)
+{
+ struct davinci_spi *davinci_spi;
+ struct davinci_spi_dma *davinci_spi_dma;
+ struct davinci_spi_platform_data *pdata;
+ struct device *sdev;
+ int r;
+
+ davinci_spi = spi_master_get_devdata(spi->master);
+ davinci_spi_dma = &davinci_spi->dma_channels[spi->chip_select];
+ pdata = davinci_spi->pdata;
+ sdev = davinci_spi->bitbang.master->dev.parent;
+
+ r = edma_alloc_channel(davinci_spi_dma->dma_rx_sync_dev,
+ davinci_spi_dma_rx_callback, spi,
+ davinci_spi_dma->eventq);
+ if (r < 0) {
+ dev_dbg(sdev, "Unable to request DMA channel for SPI RX\n");
+ return -EAGAIN;
+ }
+ davinci_spi_dma->dma_rx_channel = r;
+ r = edma_alloc_channel(davinci_spi_dma->dma_tx_sync_dev,
+ davinci_spi_dma_tx_callback, spi,
+ davinci_spi_dma->eventq);
+ if (r < 0) {
+ edma_free_channel(davinci_spi_dma->dma_rx_channel);
+ davinci_spi_dma->dma_rx_channel = -1;
+ dev_dbg(sdev, "Unable to request DMA channel for SPI TX\n");
+ return -EAGAIN;
+ }
+ davinci_spi_dma->dma_tx_channel = r;
+
+ return 0;
+}
+
+/**
+ * davinci_spi_setup - This functions will set default transfer method
+ * @spi: spi device on which data transfer to be done
+ *
+ * This functions sets the default transfer method.
+ */
+
+static int davinci_spi_setup(struct spi_device *spi)
+{
+ int retval;
+ struct davinci_spi *davinci_spi;
+ struct davinci_spi_dma *davinci_spi_dma;
+ struct device *sdev;
+
+ davinci_spi = spi_master_get_devdata(spi->master);
+ sdev = davinci_spi->bitbang.master->dev.parent;
+
+ /* if bits per word length is zero then set it default 8 */
+ if (!spi->bits_per_word)
+ spi->bits_per_word = 8;
+
+ davinci_spi->slave[spi->chip_select].cmd_to_write = 0;
+
+ if (use_dma && davinci_spi->dma_channels) {
+ davinci_spi_dma = &davinci_spi->dma_channels[spi->chip_select];
+
+ if ((davinci_spi_dma->dma_rx_channel == -1)
+ || (davinci_spi_dma->dma_tx_channel == -1)) {
+ retval = davinci_spi_request_dma(spi);
+ if (retval < 0)
+ return retval;
+ }
+ }
+
+ /*
+ * SPI in DaVinci and DA8xx operate between
+ * 600 KHz and 50 MHz
+ */
+ if (spi->max_speed_hz < 600000 || spi->max_speed_hz > 50000000) {
+ dev_dbg(sdev, "Operating frequency is not in acceptable "
+ "range\n");
+ return -EINVAL;
+ }
+
+ /*
+ * Set up SPIFMTn register, unique to this chipselect.
+ *
+ * NOTE: we could do all of these with one write. Also, some
+ * of the "version 2" features are found in chips that don't
+ * support all of them...
+ */
+ if (spi->mode & SPI_LSB_FIRST)
+ set_fmt_bits(davinci_spi->base, SPIFMT_SHIFTDIR_MASK,
+ spi->chip_select);
+ else
+ clear_fmt_bits(davinci_spi->base, SPIFMT_SHIFTDIR_MASK,
+ spi->chip_select);
+
+ if (spi->mode & SPI_CPOL)
+ set_fmt_bits(davinci_spi->base, SPIFMT_POLARITY_MASK,
+ spi->chip_select);
+ else
+ clear_fmt_bits(davinci_spi->base, SPIFMT_POLARITY_MASK,
+ spi->chip_select);
+
+ if (!(spi->mode & SPI_CPHA))
+ set_fmt_bits(davinci_spi->base, SPIFMT_PHASE_MASK,
+ spi->chip_select);
+ else
+ clear_fmt_bits(davinci_spi->base, SPIFMT_PHASE_MASK,
+ spi->chip_select);
+
+ /*
+ * Version 1 hardware supports two basic SPI modes:
+ * - Standard SPI mode uses 4 pins, with chipselect
+ * - 3 pin SPI is a 4 pin variant without CS (SPI_NO_CS)
+ * (distinct from SPI_3WIRE, with just one data wire;
+ * or similar variants without MOSI or without MISO)
+ *
+ * Version 2 hardware supports an optional handshaking signal,
+ * so it can support two more modes:
+ * - 5 pin SPI variant is standard SPI plus SPI_READY
+ * - 4 pin with enable is (SPI_READY | SPI_NO_CS)
+ */
+
+ if (davinci_spi->version == SPI_VERSION_2) {
+ clear_fmt_bits(davinci_spi->base, SPIFMT_WDELAY_MASK,
+ spi->chip_select);
+ set_fmt_bits(davinci_spi->base,
+ (davinci_spi->pdata->wdelay
+ << SPIFMT_WDELAY_SHIFT)
+ & SPIFMT_WDELAY_MASK,
+ spi->chip_select);
+
+ if (davinci_spi->pdata->odd_parity)
+ set_fmt_bits(davinci_spi->base,
+ SPIFMT_ODD_PARITY_MASK,
+ spi->chip_select);
+ else
+ clear_fmt_bits(davinci_spi->base,
+ SPIFMT_ODD_PARITY_MASK,
+ spi->chip_select);
+
+ if (davinci_spi->pdata->parity_enable)
+ set_fmt_bits(davinci_spi->base,
+ SPIFMT_PARITYENA_MASK,
+ spi->chip_select);
+ else
+ clear_fmt_bits(davinci_spi->base,
+ SPIFMT_PARITYENA_MASK,
+ spi->chip_select);
+
+ if (davinci_spi->pdata->wait_enable)
+ set_fmt_bits(davinci_spi->base,
+ SPIFMT_WAITENA_MASK,
+ spi->chip_select);
+ else
+ clear_fmt_bits(davinci_spi->base,
+ SPIFMT_WAITENA_MASK,
+ spi->chip_select);
+
+ if (davinci_spi->pdata->timer_disable)
+ set_fmt_bits(davinci_spi->base,
+ SPIFMT_DISTIMER_MASK,
+ spi->chip_select);
+ else
+ clear_fmt_bits(davinci_spi->base,
+ SPIFMT_DISTIMER_MASK,
+ spi->chip_select);
+ }
+
+ retval = davinci_spi_setup_transfer(spi, NULL);
+
+ return retval;
+}
+
+static void davinci_spi_cleanup(struct spi_device *spi)
+{
+ struct davinci_spi *davinci_spi = spi_master_get_devdata(spi->master);
+ struct davinci_spi_dma *davinci_spi_dma;
+
+ davinci_spi_dma = &davinci_spi->dma_channels[spi->chip_select];
+
+ if (use_dma && davinci_spi->dma_channels) {
+ davinci_spi_dma = &davinci_spi->dma_channels[spi->chip_select];
+
+ if ((davinci_spi_dma->dma_rx_channel != -1)
+ && (davinci_spi_dma->dma_tx_channel != -1)) {
+ edma_free_channel(davinci_spi_dma->dma_tx_channel);
+ edma_free_channel(davinci_spi_dma->dma_rx_channel);
+ }
+ }
+}
+
+static int davinci_spi_bufs_prep(struct spi_device *spi,
+ struct davinci_spi *davinci_spi)
+{
+ int op_mode = 0;
+
+ /*
+ * REVISIT unless devices disagree about SPI_LOOP or
+ * SPI_READY (SPI_NO_CS only allows one device!), this
+ * should not need to be done before each message...
+ * optimize for both flags staying cleared.
+ */
+
+ op_mode = SPIPC0_DIFUN_MASK
+ | SPIPC0_DOFUN_MASK
+ | SPIPC0_CLKFUN_MASK;
+ if (!(spi->mode & SPI_NO_CS))
+ op_mode |= 1 << spi->chip_select;
+ if (spi->mode & SPI_READY)
+ op_mode |= SPIPC0_SPIENA_MASK;
+
+ iowrite32(op_mode, davinci_spi->base + SPIPC0);
+
+ if (spi->mode & SPI_LOOP)
+ set_io_bits(davinci_spi->base + SPIGCR1,
+ SPIGCR1_LOOPBACK_MASK);
+ else
+ clear_io_bits(davinci_spi->base + SPIGCR1,
+ SPIGCR1_LOOPBACK_MASK);
+
+ return 0;
+}
+
+static int davinci_spi_check_error(struct davinci_spi *davinci_spi,
+ int int_status)
+{
+ struct device *sdev = davinci_spi->bitbang.master->dev.parent;
+
+ if (int_status & SPIFLG_TIMEOUT_MASK) {
+ dev_dbg(sdev, "SPI Time-out Error\n");
+ return -ETIMEDOUT;
+ }
+ if (int_status & SPIFLG_DESYNC_MASK) {
+ dev_dbg(sdev, "SPI Desynchronization Error\n");
+ return -EIO;
+ }
+ if (int_status & SPIFLG_BITERR_MASK) {
+ dev_dbg(sdev, "SPI Bit error\n");
+ return -EIO;
+ }
+
+ if (davinci_spi->version == SPI_VERSION_2) {
+ if (int_status & SPIFLG_DLEN_ERR_MASK) {
+ dev_dbg(sdev, "SPI Data Length Error\n");
+ return -EIO;
+ }
+ if (int_status & SPIFLG_PARERR_MASK) {
+ dev_dbg(sdev, "SPI Parity Error\n");
+ return -EIO;
+ }
+ if (int_status & SPIFLG_OVRRUN_MASK) {
+ dev_dbg(sdev, "SPI Data Overrun error\n");
+ return -EIO;
+ }
+ if (int_status & SPIFLG_TX_INTR_MASK) {
+ dev_dbg(sdev, "SPI TX intr bit set\n");
+ return -EIO;
+ }
+ if (int_status & SPIFLG_BUF_INIT_ACTIVE_MASK) {
+ dev_dbg(sdev, "SPI Buffer Init Active\n");
+ return -EBUSY;
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * davinci_spi_bufs - functions which will handle transfer data
+ * @spi: spi device on which data transfer to be done
+ * @t: spi transfer in which transfer info is filled
+ *
+ * This function will put data to be transferred into data register
+ * of SPI controller and then wait until the completion will be marked
+ * by the IRQ Handler.
+ */
+static int davinci_spi_bufs_pio(struct spi_device *spi, struct spi_transfer *t)
+{
+ struct davinci_spi *davinci_spi;
+ int int_status, count, ret;
+ u8 conv, tmp;
+ u32 tx_data, data1_reg_val;
+ u32 buf_val, flg_val;
+ struct davinci_spi_platform_data *pdata;
+
+ davinci_spi = spi_master_get_devdata(spi->master);
+ pdata = davinci_spi->pdata;
+
+ davinci_spi->tx = t->tx_buf;
+ davinci_spi->rx = t->rx_buf;
+
+ /* convert len to words based on bits_per_word */
+ conv = davinci_spi->slave[spi->chip_select].bytes_per_word;
+ davinci_spi->count = t->len / conv;
+
+ INIT_COMPLETION(davinci_spi->done);
+
+ ret = davinci_spi_bufs_prep(spi, davinci_spi);
+ if (ret)
+ return ret;
+
+ /* Enable SPI */
+ set_io_bits(davinci_spi->base + SPIGCR1, SPIGCR1_SPIENA_MASK);
+
+ iowrite32(0 | (pdata->c2tdelay << SPI_C2TDELAY_SHIFT) |
+ (pdata->t2cdelay << SPI_T2CDELAY_SHIFT),
+ davinci_spi->base + SPIDELAY);
+
+ count = davinci_spi->count;
+ data1_reg_val = pdata->cs_hold << SPIDAT1_CSHOLD_SHIFT;
+ tmp = ~(0x1 << spi->chip_select);
+
+ clear_io_bits(davinci_spi->base + SPIDEF, ~tmp);
+
+ data1_reg_val |= tmp << SPIDAT1_CSNR_SHIFT;
+
+ while ((ioread32(davinci_spi->base + SPIBUF)
+ & SPIBUF_RXEMPTY_MASK) == 0)
+ cpu_relax();
+
+ /* Determine the command to execute READ or WRITE */
+ if (t->tx_buf) {
+ clear_io_bits(davinci_spi->base + SPIINT, SPIINT_MASKALL);
+
+ while (1) {
+ tx_data = davinci_spi->get_tx(davinci_spi);
+
+ data1_reg_val &= ~(0xFFFF);
+ data1_reg_val |= (0xFFFF & tx_data);
+
+ buf_val = ioread32(davinci_spi->base + SPIBUF);
+ if ((buf_val & SPIBUF_TXFULL_MASK) == 0) {
+ iowrite32(data1_reg_val,
+ davinci_spi->base + SPIDAT1);
+
+ count--;
+ }
+ while (ioread32(davinci_spi->base + SPIBUF)
+ & SPIBUF_RXEMPTY_MASK)
+ cpu_relax();
+
+ /* getting the returned byte */
+ if (t->rx_buf) {
+ buf_val = ioread32(davinci_spi->base + SPIBUF);
+ davinci_spi->get_rx(buf_val, davinci_spi);
+ }
+ if (count <= 0)
+ break;
+ }
+ } else {
+ if (pdata->poll_mode) {
+ while (1) {
+ /* keeps the serial clock going */
+ if ((ioread32(davinci_spi->base + SPIBUF)
+ & SPIBUF_TXFULL_MASK) == 0)
+ iowrite32(data1_reg_val,
+ davinci_spi->base + SPIDAT1);
+
+ while (ioread32(davinci_spi->base + SPIBUF) &
+ SPIBUF_RXEMPTY_MASK)
+ cpu_relax();
+
+ flg_val = ioread32(davinci_spi->base + SPIFLG);
+ buf_val = ioread32(davinci_spi->base + SPIBUF);
+
+ davinci_spi->get_rx(buf_val, davinci_spi);
+
+ count--;
+ if (count <= 0)
+ break;
+ }
+ } else { /* Receive in Interrupt mode */
+ int i;
+
+ for (i = 0; i < davinci_spi->count; i++) {
+ set_io_bits(davinci_spi->base + SPIINT,
+ SPIINT_BITERR_INTR
+ | SPIINT_OVRRUN_INTR
+ | SPIINT_RX_INTR);
+
+ iowrite32(data1_reg_val,
+ davinci_spi->base + SPIDAT1);
+
+ while (ioread32(davinci_spi->base + SPIINT) &
+ SPIINT_RX_INTR)
+ cpu_relax();
+ }
+ iowrite32((data1_reg_val & 0x0ffcffff),
+ davinci_spi->base + SPIDAT1);
+ }
+ }
+
+ /*
+ * Check for bit error, desync error,parity error,timeout error and
+ * receive overflow errors
+ */
+ int_status = ioread32(davinci_spi->base + SPIFLG);
+
+ ret = davinci_spi_check_error(davinci_spi, int_status);
+ if (ret != 0)
+ return ret;
+
+ /* SPI Framework maintains the count only in bytes so convert back */
+ davinci_spi->count *= conv;
+
+ return t->len;
+}
+
+#define DAVINCI_DMA_DATA_TYPE_S8 0x01
+#define DAVINCI_DMA_DATA_TYPE_S16 0x02
+#define DAVINCI_DMA_DATA_TYPE_S32 0x04
+
+static int davinci_spi_bufs_dma(struct spi_device *spi, struct spi_transfer *t)
+{
+ struct davinci_spi *davinci_spi;
+ int int_status = 0;
+ int count, temp_count;
+ u8 conv = 1;
+ u8 tmp;
+ u32 data1_reg_val;
+ struct davinci_spi_dma *davinci_spi_dma;
+ int word_len, data_type, ret;
+ unsigned long tx_reg, rx_reg;
+ struct davinci_spi_platform_data *pdata;
+ struct device *sdev;
+
+ davinci_spi = spi_master_get_devdata(spi->master);
+ pdata = davinci_spi->pdata;
+ sdev = davinci_spi->bitbang.master->dev.parent;
+
+ davinci_spi_dma = &davinci_spi->dma_channels[spi->chip_select];
+
+ tx_reg = (unsigned long)davinci_spi->pbase + SPIDAT1;
+ rx_reg = (unsigned long)davinci_spi->pbase + SPIBUF;
+
+ davinci_spi->tx = t->tx_buf;
+ davinci_spi->rx = t->rx_buf;
+
+ /* convert len to words based on bits_per_word */
+ conv = davinci_spi->slave[spi->chip_select].bytes_per_word;
+ davinci_spi->count = t->len / conv;
+
+ INIT_COMPLETION(davinci_spi->done);
+
+ init_completion(&davinci_spi_dma->dma_rx_completion);
+ init_completion(&davinci_spi_dma->dma_tx_completion);
+
+ word_len = conv * 8;
+
+ if (word_len <= 8)
+ data_type = DAVINCI_DMA_DATA_TYPE_S8;
+ else if (word_len <= 16)
+ data_type = DAVINCI_DMA_DATA_TYPE_S16;
+ else if (word_len <= 32)
+ data_type = DAVINCI_DMA_DATA_TYPE_S32;
+ else
+ return -EINVAL;
+
+ ret = davinci_spi_bufs_prep(spi, davinci_spi);
+ if (ret)
+ return ret;
+
+ /* Put delay val if required */
+ iowrite32(0 | (pdata->c2tdelay << SPI_C2TDELAY_SHIFT) |
+ (pdata->t2cdelay << SPI_T2CDELAY_SHIFT),
+ davinci_spi->base + SPIDELAY);
+
+ count = davinci_spi->count; /* the number of elements */
+ data1_reg_val = pdata->cs_hold << SPIDAT1_CSHOLD_SHIFT;
+
+ /* CS default = 0xFF */
+ tmp = ~(0x1 << spi->chip_select);
+
+ clear_io_bits(davinci_spi->base + SPIDEF, ~tmp);
+
+ data1_reg_val |= tmp << SPIDAT1_CSNR_SHIFT;
+
+ /* disable all interrupts for dma transfers */
+ clear_io_bits(davinci_spi->base + SPIINT, SPIINT_MASKALL);
+ /* Disable SPI to write configuration bits in SPIDAT */
+ clear_io_bits(davinci_spi->base + SPIGCR1, SPIGCR1_SPIENA_MASK);
+ iowrite32(data1_reg_val, davinci_spi->base + SPIDAT1);
+ /* Enable SPI */
+ set_io_bits(davinci_spi->base + SPIGCR1, SPIGCR1_SPIENA_MASK);
+
+ while ((ioread32(davinci_spi->base + SPIBUF)
+ & SPIBUF_RXEMPTY_MASK) == 0)
+ cpu_relax();
+
+
+ if (t->tx_buf) {
+ t->tx_dma = dma_map_single(&spi->dev, (void *)t->tx_buf, count,
+ DMA_TO_DEVICE);
+ if (dma_mapping_error(&spi->dev, t->tx_dma)) {
+ dev_dbg(sdev, "Unable to DMA map a %d bytes"
+ " TX buffer\n", count);
+ return -ENOMEM;
+ }
+ temp_count = count;
+ } else {
+ /* We need TX clocking for RX transaction */
+ t->tx_dma = dma_map_single(&spi->dev,
+ (void *)davinci_spi->tmp_buf, count + 1,
+ DMA_TO_DEVICE);
+ if (dma_mapping_error(&spi->dev, t->tx_dma)) {
+ dev_dbg(sdev, "Unable to DMA map a %d bytes"
+ " TX tmp buffer\n", count);
+ return -ENOMEM;
+ }
+ temp_count = count + 1;
+ }
+
+ edma_set_transfer_params(davinci_spi_dma->dma_tx_channel,
+ data_type, temp_count, 1, 0, ASYNC);
+ edma_set_dest(davinci_spi_dma->dma_tx_channel, tx_reg, INCR, W8BIT);
+ edma_set_src(davinci_spi_dma->dma_tx_channel, t->tx_dma, INCR, W8BIT);
+ edma_set_src_index(davinci_spi_dma->dma_tx_channel, data_type, 0);
+ edma_set_dest_index(davinci_spi_dma->dma_tx_channel, 0, 0);
+
+ if (t->rx_buf) {
+ /* initiate transaction */
+ iowrite32(data1_reg_val, davinci_spi->base + SPIDAT1);
+
+ t->rx_dma = dma_map_single(&spi->dev, (void *)t->rx_buf, count,
+ DMA_FROM_DEVICE);
+ if (dma_mapping_error(&spi->dev, t->rx_dma)) {
+ dev_dbg(sdev, "Couldn't DMA map a %d bytes RX buffer\n",
+ count);
+ if (t->tx_buf != NULL)
+ dma_unmap_single(NULL, t->tx_dma,
+ count, DMA_TO_DEVICE);
+ return -ENOMEM;
+ }
+ edma_set_transfer_params(davinci_spi_dma->dma_rx_channel,
+ data_type, count, 1, 0, ASYNC);
+ edma_set_src(davinci_spi_dma->dma_rx_channel,
+ rx_reg, INCR, W8BIT);
+ edma_set_dest(davinci_spi_dma->dma_rx_channel,
+ t->rx_dma, INCR, W8BIT);
+ edma_set_src_index(davinci_spi_dma->dma_rx_channel, 0, 0);
+ edma_set_dest_index(davinci_spi_dma->dma_rx_channel,
+ data_type, 0);
+ }
+
+ if ((t->tx_buf) || (t->rx_buf))
+ edma_start(davinci_spi_dma->dma_tx_channel);
+
+ if (t->rx_buf)
+ edma_start(davinci_spi_dma->dma_rx_channel);
+
+ if ((t->rx_buf) || (t->tx_buf))
+ davinci_spi_set_dma_req(spi, 1);
+
+ if (t->tx_buf)
+ wait_for_completion_interruptible(
+ &davinci_spi_dma->dma_tx_completion);
+
+ if (t->rx_buf)
+ wait_for_completion_interruptible(
+ &davinci_spi_dma->dma_rx_completion);
+
+ dma_unmap_single(NULL, t->tx_dma, temp_count, DMA_TO_DEVICE);
+
+ if (t->rx_buf)
+ dma_unmap_single(NULL, t->rx_dma, count, DMA_FROM_DEVICE);
+
+ /*
+ * Check for bit error, desync error,parity error,timeout error and
+ * receive overflow errors
+ */
+ int_status = ioread32(davinci_spi->base + SPIFLG);
+
+ ret = davinci_spi_check_error(davinci_spi, int_status);
+ if (ret != 0)
+ return ret;
+
+ /* SPI Framework maintains the count only in bytes so convert back */
+ davinci_spi->count *= conv;
+
+ return t->len;
+}
+
+/**
+ * davinci_spi_irq - IRQ handler for DaVinci SPI
+ * @irq: IRQ number for this SPI Master
+ * @context_data: structure for SPI Master controller davinci_spi
+ */
+static irqreturn_t davinci_spi_irq(s32 irq, void *context_data)
+{
+ struct davinci_spi *davinci_spi = context_data;
+ u32 int_status, rx_data = 0;
+ irqreturn_t ret = IRQ_NONE;
+
+ int_status = ioread32(davinci_spi->base + SPIFLG);
+
+ while ((int_status & SPIFLG_RX_INTR_MASK)) {
+ if (likely(int_status & SPIFLG_RX_INTR_MASK)) {
+ ret = IRQ_HANDLED;
+
+ rx_data = ioread32(davinci_spi->base + SPIBUF);
+ davinci_spi->get_rx(rx_data, davinci_spi);
+
+ /* Disable Receive Interrupt */
+ iowrite32(~(SPIINT_RX_INTR | SPIINT_TX_INTR),
+ davinci_spi->base + SPIINT);
+ } else
+ (void)davinci_spi_check_error(davinci_spi, int_status);
+
+ int_status = ioread32(davinci_spi->base + SPIFLG);
+ }
+
+ return ret;
+}
+
+/**
+ * davinci_spi_probe - probe function for SPI Master Controller
+ * @pdev: platform_device structure which contains plateform specific data
+ */
+static int davinci_spi_probe(struct platform_device *pdev)
+{
+ struct spi_master *master;
+ struct davinci_spi *davinci_spi;
+ struct davinci_spi_platform_data *pdata;
+ struct resource *r, *mem;
+ resource_size_t dma_rx_chan = SPI_NO_RESOURCE;
+ resource_size_t dma_tx_chan = SPI_NO_RESOURCE;
+ resource_size_t dma_eventq = SPI_NO_RESOURCE;
+ int i = 0, ret = 0;
+
+ pdata = pdev->dev.platform_data;
+ if (pdata == NULL) {
+ ret = -ENODEV;
+ goto err;
+ }
+
+ master = spi_alloc_master(&pdev->dev, sizeof(struct davinci_spi));
+ if (master == NULL) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ dev_set_drvdata(&pdev->dev, master);
+
+ davinci_spi = spi_master_get_devdata(master);
+ if (davinci_spi == NULL) {
+ ret = -ENOENT;
+ goto free_master;
+ }
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (r == NULL) {
+ ret = -ENOENT;
+ goto free_master;
+ }
+
+ davinci_spi->pbase = r->start;
+ davinci_spi->region_size = resource_size(r);
+ davinci_spi->pdata = pdata;
+
+ mem = request_mem_region(r->start, davinci_spi->region_size,
+ pdev->name);
+ if (mem == NULL) {
+ ret = -EBUSY;
+ goto free_master;
+ }
+
+ davinci_spi->base = (struct davinci_spi_reg __iomem *)
+ ioremap(r->start, davinci_spi->region_size);
+ if (davinci_spi->base == NULL) {
+ ret = -ENOMEM;
+ goto release_region;
+ }
+
+ davinci_spi->irq = platform_get_irq(pdev, 0);
+ if (davinci_spi->irq <= 0) {
+ ret = -EINVAL;
+ goto unmap_io;
+ }
+
+ ret = request_irq(davinci_spi->irq, davinci_spi_irq, IRQF_DISABLED,
+ dev_name(&pdev->dev), davinci_spi);
+ if (ret)
+ goto unmap_io;
+
+ /* Allocate tmp_buf for tx_buf */
+ davinci_spi->tmp_buf = kzalloc(SPI_BUFSIZ, GFP_KERNEL);
+ if (davinci_spi->tmp_buf == NULL) {
+ ret = -ENOMEM;
+ goto irq_free;
+ }
+
+ davinci_spi->bitbang.master = spi_master_get(master);
+ if (davinci_spi->bitbang.master == NULL) {
+ ret = -ENODEV;
+ goto free_tmp_buf;
+ }
+
+ davinci_spi->clk = clk_get(&pdev->dev, NULL);
+ if (IS_ERR(davinci_spi->clk)) {
+ ret = -ENODEV;
+ goto put_master;
+ }
+ clk_enable(davinci_spi->clk);
+
+
+ master->bus_num = pdev->id;
+ master->num_chipselect = pdata->num_chipselect;
+ master->setup = davinci_spi_setup;
+ master->cleanup = davinci_spi_cleanup;
+
+ davinci_spi->bitbang.chipselect = davinci_spi_chipselect;
+ davinci_spi->bitbang.setup_transfer = davinci_spi_setup_transfer;
+
+ davinci_spi->version = pdata->version;
+ use_dma = pdata->use_dma;
+
+ davinci_spi->bitbang.flags = SPI_NO_CS | SPI_LSB_FIRST | SPI_LOOP;
+ if (davinci_spi->version == SPI_VERSION_2)
+ davinci_spi->bitbang.flags |= SPI_READY;
+
+ if (use_dma) {
+ r = platform_get_resource(pdev, IORESOURCE_DMA, 0);
+ if (r)
+ dma_rx_chan = r->start;
+ r = platform_get_resource(pdev, IORESOURCE_DMA, 1);
+ if (r)
+ dma_tx_chan = r->start;
+ r = platform_get_resource(pdev, IORESOURCE_DMA, 2);
+ if (r)
+ dma_eventq = r->start;
+ }
+
+ if (!use_dma ||
+ dma_rx_chan == SPI_NO_RESOURCE ||
+ dma_tx_chan == SPI_NO_RESOURCE ||
+ dma_eventq == SPI_NO_RESOURCE) {
+ davinci_spi->bitbang.txrx_bufs = davinci_spi_bufs_pio;
+ use_dma = 0;
+ } else {
+ davinci_spi->bitbang.txrx_bufs = davinci_spi_bufs_dma;
+ davinci_spi->dma_channels = kzalloc(master->num_chipselect
+ * sizeof(struct davinci_spi_dma), GFP_KERNEL);
+ if (davinci_spi->dma_channels == NULL) {
+ ret = -ENOMEM;
+ goto free_clk;
+ }
+
+ for (i = 0; i < master->num_chipselect; i++) {
+ davinci_spi->dma_channels[i].dma_rx_channel = -1;
+ davinci_spi->dma_channels[i].dma_rx_sync_dev =
+ dma_rx_chan;
+ davinci_spi->dma_channels[i].dma_tx_channel = -1;
+ davinci_spi->dma_channels[i].dma_tx_sync_dev =
+ dma_tx_chan;
+ davinci_spi->dma_channels[i].eventq = dma_eventq;
+ }
+ dev_info(&pdev->dev, "DaVinci SPI driver in EDMA mode\n"
+ "Using RX channel = %d , TX channel = %d and "
+ "event queue = %d", dma_rx_chan, dma_tx_chan,
+ dma_eventq);
+ }
+
+ davinci_spi->get_rx = davinci_spi_rx_buf_u8;
+ davinci_spi->get_tx = davinci_spi_tx_buf_u8;
+
+ init_completion(&davinci_spi->done);
+
+ /* Reset In/OUT SPI module */
+ iowrite32(0, davinci_spi->base + SPIGCR0);
+ udelay(100);
+ iowrite32(1, davinci_spi->base + SPIGCR0);
+
+ /* Clock internal */
+ if (davinci_spi->pdata->clk_internal)
+ set_io_bits(davinci_spi->base + SPIGCR1,
+ SPIGCR1_CLKMOD_MASK);
+ else
+ clear_io_bits(davinci_spi->base + SPIGCR1,
+ SPIGCR1_CLKMOD_MASK);
+
+ /* master mode default */
+ set_io_bits(davinci_spi->base + SPIGCR1, SPIGCR1_MASTER_MASK);
+
+ if (davinci_spi->pdata->intr_level)
+ iowrite32(SPI_INTLVL_1, davinci_spi->base + SPILVL);
+ else
+ iowrite32(SPI_INTLVL_0, davinci_spi->base + SPILVL);
+
+ ret = spi_bitbang_start(&davinci_spi->bitbang);
+ if (ret)
+ goto free_clk;
+
+ dev_info(&pdev->dev, "Controller at 0x%p \n", davinci_spi->base);
+
+ if (!pdata->poll_mode)
+ dev_info(&pdev->dev, "Operating in interrupt mode"
+ " using IRQ %d\n", davinci_spi->irq);
+
+ return ret;
+
+free_clk:
+ clk_disable(davinci_spi->clk);
+ clk_put(davinci_spi->clk);
+put_master:
+ spi_master_put(master);
+free_tmp_buf:
+ kfree(davinci_spi->tmp_buf);
+irq_free:
+ free_irq(davinci_spi->irq, davinci_spi);
+unmap_io:
+ iounmap(davinci_spi->base);
+release_region:
+ release_mem_region(davinci_spi->pbase, davinci_spi->region_size);
+free_master:
+ kfree(master);
+err:
+ return ret;
+}
+
+/**
+ * davinci_spi_remove - remove function for SPI Master Controller
+ * @pdev: platform_device structure which contains plateform specific data
+ *
+ * This function will do the reverse action of davinci_spi_probe function
+ * It will free the IRQ and SPI controller's memory region.
+ * It will also call spi_bitbang_stop to destroy the work queue which was
+ * created by spi_bitbang_start.
+ */
+static int __exit davinci_spi_remove(struct platform_device *pdev)
+{
+ struct davinci_spi *davinci_spi;
+ struct spi_master *master;
+
+ master = dev_get_drvdata(&pdev->dev);
+ davinci_spi = spi_master_get_devdata(master);
+
+ spi_bitbang_stop(&davinci_spi->bitbang);
+
+ clk_disable(davinci_spi->clk);
+ clk_put(davinci_spi->clk);
+ spi_master_put(master);
+ kfree(davinci_spi->tmp_buf);
+ free_irq(davinci_spi->irq, davinci_spi);
+ iounmap(davinci_spi->base);
+ release_mem_region(davinci_spi->pbase, davinci_spi->region_size);
+
+ return 0;
+}
+
+static struct platform_driver davinci_spi_driver = {
+ .driver.name = "spi_davinci",
+ .remove = __exit_p(davinci_spi_remove),
+};
+
+static int __init davinci_spi_init(void)
+{
+ return platform_driver_probe(&davinci_spi_driver, davinci_spi_probe);
+}
+module_init(davinci_spi_init);
+
+static void __exit davinci_spi_exit(void)
+{
+ platform_driver_unregister(&davinci_spi_driver);
+}
+module_exit(davinci_spi_exit);
+
+MODULE_DESCRIPTION("TI DaVinci SPI Master Controller Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/spi/dw_spi.c b/drivers/spi/dw_spi.c
index 31620fa..8ed38f1 100644
--- a/drivers/spi/dw_spi.c
+++ b/drivers/spi/dw_spi.c
@@ -152,6 +152,7 @@
#else
static inline int mrst_spi_debugfs_init(struct dw_spi *dws)
{
+ return 0;
}
static inline void mrst_spi_debugfs_remove(struct dw_spi *dws)
@@ -161,14 +162,14 @@
static void wait_till_not_busy(struct dw_spi *dws)
{
- unsigned long end = jiffies + usecs_to_jiffies(1000);
+ unsigned long end = jiffies + 1 + usecs_to_jiffies(1000);
while (time_before(jiffies, end)) {
if (!(dw_readw(dws, sr) & SR_BUSY))
return;
}
dev_err(&dws->master->dev,
- "DW SPI: Stutus keeps busy for 1000us after a read/write!\n");
+ "DW SPI: Status keeps busy for 1000us after a read/write!\n");
}
static void flush(struct dw_spi *dws)
@@ -358,6 +359,8 @@
static irqreturn_t interrupt_transfer(struct dw_spi *dws)
{
u16 irq_status, irq_mask = 0x3f;
+ u32 int_level = dws->fifo_len / 2;
+ u32 left;
irq_status = dw_readw(dws, isr) & irq_mask;
/* Error handling */
@@ -369,22 +372,23 @@
return IRQ_HANDLED;
}
- /* INT comes from tx */
- if (dws->tx && (irq_status & SPI_INT_TXEI)) {
- while (dws->tx < dws->tx_end)
+ if (irq_status & SPI_INT_TXEI) {
+ spi_mask_intr(dws, SPI_INT_TXEI);
+
+ left = (dws->tx_end - dws->tx) / dws->n_bytes;
+ left = (left > int_level) ? int_level : left;
+
+ while (left--)
dws->write(dws);
+ dws->read(dws);
- if (dws->tx == dws->tx_end) {
- spi_mask_intr(dws, SPI_INT_TXEI);
- transfer_complete(dws);
- }
- }
-
- /* INT comes from rx */
- if (dws->rx && (irq_status & SPI_INT_RXFI)) {
- if (dws->read(dws))
+ /* Re-enable the IRQ if there is still data left to tx */
+ if (dws->tx_end > dws->tx)
+ spi_umask_intr(dws, SPI_INT_TXEI);
+ else
transfer_complete(dws);
}
+
return IRQ_HANDLED;
}
@@ -404,12 +408,9 @@
/* Must be called inside pump_transfers() */
static void poll_transfer(struct dw_spi *dws)
{
- if (dws->tx) {
- while (dws->write(dws))
- dws->read(dws);
- }
+ while (dws->write(dws))
+ dws->read(dws);
- dws->read(dws);
transfer_complete(dws);
}
@@ -428,6 +429,7 @@
u8 bits = 0;
u8 imask = 0;
u8 cs_change = 0;
+ u16 txint_level = 0;
u16 clk_div = 0;
u32 speed = 0;
u32 cr0 = 0;
@@ -438,6 +440,9 @@
chip = dws->cur_chip;
spi = message->spi;
+ if (unlikely(!chip->clk_div))
+ chip->clk_div = dws->max_freq / chip->speed_hz;
+
if (message->state == ERROR_STATE) {
message->status = -EIO;
goto early_exit;
@@ -492,7 +497,7 @@
/* clk_div doesn't support odd number */
clk_div = dws->max_freq / speed;
- clk_div = (clk_div >> 1) << 1;
+ clk_div = (clk_div + 1) & 0xfffe;
chip->speed_hz = speed;
chip->clk_div = clk_div;
@@ -532,14 +537,35 @@
}
message->state = RUNNING_STATE;
+ /*
+ * Adjust transfer mode if necessary. Requires platform dependent
+ * chipselect mechanism.
+ */
+ if (dws->cs_control) {
+ if (dws->rx && dws->tx)
+ chip->tmode = 0x00;
+ else if (dws->rx)
+ chip->tmode = 0x02;
+ else
+ chip->tmode = 0x01;
+
+ cr0 &= ~(0x3 << SPI_MODE_OFFSET);
+ cr0 |= (chip->tmode << SPI_TMOD_OFFSET);
+ }
+
/* Check if current transfer is a DMA transaction */
dws->dma_mapped = map_dma_buffers(dws);
+ /*
+ * Interrupt mode
+ * we only need set the TXEI IRQ, as TX/RX always happen syncronizely
+ */
if (!dws->dma_mapped && !chip->poll_mode) {
- if (dws->rx)
- imask |= SPI_INT_RXFI;
- if (dws->tx)
- imask |= SPI_INT_TXEI;
+ int templen = dws->len / dws->n_bytes;
+ txint_level = dws->fifo_len / 2;
+ txint_level = (templen > txint_level) ? txint_level : templen;
+
+ imask |= SPI_INT_TXEI;
dws->transfer_handler = interrupt_transfer;
}
@@ -549,21 +575,23 @@
* 2. clk_div is changed
* 3. control value changes
*/
- if (dw_readw(dws, ctrl0) != cr0 || cs_change || clk_div) {
+ if (dw_readw(dws, ctrl0) != cr0 || cs_change || clk_div || imask) {
spi_enable_chip(dws, 0);
if (dw_readw(dws, ctrl0) != cr0)
dw_writew(dws, ctrl0, cr0);
- /* Set the interrupt mask, for poll mode just diable all int */
- spi_mask_intr(dws, 0xff);
- if (!chip->poll_mode)
- spi_umask_intr(dws, imask);
-
spi_set_clk(dws, clk_div ? clk_div : chip->clk_div);
spi_chip_sel(dws, spi->chip_select);
- spi_enable_chip(dws, 1);
+ /* Set the interrupt mask, for poll mode just diable all int */
+ spi_mask_intr(dws, 0xff);
+ if (imask)
+ spi_umask_intr(dws, imask);
+ if (txint_level)
+ dw_writew(dws, txfltr, txint_level);
+
+ spi_enable_chip(dws, 1);
if (cs_change)
dws->prev_chip = chip;
}
@@ -712,11 +740,11 @@
}
chip->bits_per_word = spi->bits_per_word;
+ if (!spi->max_speed_hz) {
+ dev_err(&spi->dev, "No max speed HZ parameter\n");
+ return -EINVAL;
+ }
chip->speed_hz = spi->max_speed_hz;
- if (chip->speed_hz)
- chip->clk_div = 25000000 / chip->speed_hz;
- else
- chip->clk_div = 8; /* default value */
chip->tmode = 0; /* Tx & Rx */
/* Default SPI mode is SCPOL = 0, SCPH = 0 */
@@ -735,7 +763,7 @@
kfree(chip);
}
-static int __init init_queue(struct dw_spi *dws)
+static int __devinit init_queue(struct dw_spi *dws)
{
INIT_LIST_HEAD(&dws->queue);
spin_lock_init(&dws->lock);
@@ -817,6 +845,22 @@
spi_mask_intr(dws, 0xff);
spi_enable_chip(dws, 1);
flush(dws);
+
+ /*
+ * Try to detect the FIFO depth if not set by interface driver,
+ * the depth could be from 2 to 256 from HW spec
+ */
+ if (!dws->fifo_len) {
+ u32 fifo;
+ for (fifo = 2; fifo <= 257; fifo++) {
+ dw_writew(dws, txfltr, fifo);
+ if (fifo != dw_readw(dws, txfltr))
+ break;
+ }
+
+ dws->fifo_len = (fifo == 257) ? 0 : fifo;
+ dw_writew(dws, txfltr, 0);
+ }
}
int __devinit dw_spi_add_host(struct dw_spi *dws)
@@ -913,6 +957,7 @@
/* Disconnect from the SPI framework */
spi_unregister_master(dws->master);
}
+EXPORT_SYMBOL(dw_spi_remove_host);
int dw_spi_suspend_host(struct dw_spi *dws)
{
diff --git a/drivers/spi/dw_spi_mmio.c b/drivers/spi/dw_spi_mmio.c
new file mode 100644
index 0000000..e35b45a
--- /dev/null
+++ b/drivers/spi/dw_spi_mmio.c
@@ -0,0 +1,147 @@
+/*
+ * dw_spi_mmio.c - Memory-mapped interface driver for DW SPI Core
+ *
+ * Copyright (c) 2010, Octasic semiconductor.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/spi/dw_spi.h>
+#include <linux/spi/spi.h>
+
+#define DRIVER_NAME "dw_spi_mmio"
+
+struct dw_spi_mmio {
+ struct dw_spi dws;
+ struct clk *clk;
+};
+
+static int __devinit dw_spi_mmio_probe(struct platform_device *pdev)
+{
+ struct dw_spi_mmio *dwsmmio;
+ struct dw_spi *dws;
+ struct resource *mem, *ioarea;
+ int ret;
+
+ dwsmmio = kzalloc(sizeof(struct dw_spi_mmio), GFP_KERNEL);
+ if (!dwsmmio) {
+ ret = -ENOMEM;
+ goto err_end;
+ }
+
+ dws = &dwsmmio->dws;
+
+ /* Get basic io resource and map it */
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!mem) {
+ dev_err(&pdev->dev, "no mem resource?\n");
+ ret = -EINVAL;
+ goto err_kfree;
+ }
+
+ ioarea = request_mem_region(mem->start, resource_size(mem),
+ pdev->name);
+ if (!ioarea) {
+ dev_err(&pdev->dev, "SPI region already claimed\n");
+ ret = -EBUSY;
+ goto err_kfree;
+ }
+
+ dws->regs = ioremap_nocache(mem->start, resource_size(mem));
+ if (!dws->regs) {
+ dev_err(&pdev->dev, "SPI region already mapped\n");
+ ret = -ENOMEM;
+ goto err_release_reg;
+ }
+
+ dws->irq = platform_get_irq(pdev, 0);
+ if (dws->irq < 0) {
+ dev_err(&pdev->dev, "no irq resource?\n");
+ ret = dws->irq; /* -ENXIO */
+ goto err_unmap;
+ }
+
+ dwsmmio->clk = clk_get(&pdev->dev, NULL);
+ if (!dwsmmio->clk) {
+ ret = -ENODEV;
+ goto err_irq;
+ }
+ clk_enable(dwsmmio->clk);
+
+ dws->parent_dev = &pdev->dev;
+ dws->bus_num = 0;
+ dws->num_cs = 4;
+ dws->max_freq = clk_get_rate(dwsmmio->clk);
+
+ ret = dw_spi_add_host(dws);
+ if (ret)
+ goto err_clk;
+
+ platform_set_drvdata(pdev, dwsmmio);
+ return 0;
+
+err_clk:
+ clk_disable(dwsmmio->clk);
+ clk_put(dwsmmio->clk);
+ dwsmmio->clk = NULL;
+err_irq:
+ free_irq(dws->irq, dws);
+err_unmap:
+ iounmap(dws->regs);
+err_release_reg:
+ release_mem_region(mem->start, resource_size(mem));
+err_kfree:
+ kfree(dwsmmio);
+err_end:
+ return ret;
+}
+
+static int __devexit dw_spi_mmio_remove(struct platform_device *pdev)
+{
+ struct dw_spi_mmio *dwsmmio = platform_get_drvdata(pdev);
+ struct resource *mem;
+
+ platform_set_drvdata(pdev, NULL);
+
+ clk_disable(dwsmmio->clk);
+ clk_put(dwsmmio->clk);
+ dwsmmio->clk = NULL;
+
+ free_irq(dwsmmio->dws.irq, &dwsmmio->dws);
+ dw_spi_remove_host(&dwsmmio->dws);
+ iounmap(dwsmmio->dws.regs);
+ kfree(dwsmmio);
+
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ release_mem_region(mem->start, resource_size(mem));
+ return 0;
+}
+
+static struct platform_driver dw_spi_mmio_driver = {
+ .remove = __devexit_p(dw_spi_mmio_remove),
+ .driver = {
+ .name = DRIVER_NAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init dw_spi_mmio_init(void)
+{
+ return platform_driver_probe(&dw_spi_mmio_driver, dw_spi_mmio_probe);
+}
+module_init(dw_spi_mmio_init);
+
+static void __exit dw_spi_mmio_exit(void)
+{
+ platform_driver_unregister(&dw_spi_mmio_driver);
+}
+module_exit(dw_spi_mmio_exit);
+
+MODULE_AUTHOR("Jean-Hugues Deschenes <jean-hugues.deschenes@octasic.com>");
+MODULE_DESCRIPTION("Memory-mapped I/O interface driver for DW SPI Core");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/spi/dw_spi_pci.c b/drivers/spi/dw_spi_pci.c
index 34ba691..1f0735f 100644
--- a/drivers/spi/dw_spi_pci.c
+++ b/drivers/spi/dw_spi_pci.c
@@ -73,6 +73,7 @@
dws->num_cs = 4;
dws->max_freq = 25000000; /* for Moorestwon */
dws->irq = pdev->irq;
+ dws->fifo_len = 40; /* FIFO has 40 words buffer */
ret = dw_spi_add_host(dws);
if (ret)
@@ -98,6 +99,7 @@
struct dw_spi_pci *dwpci = pci_get_drvdata(pdev);
pci_set_drvdata(pdev, NULL);
+ dw_spi_remove_host(&dwpci->dws);
iounmap(dwpci->dws.regs);
pci_release_region(pdev, 0);
kfree(dwpci);
diff --git a/drivers/spi/mpc52xx_psc_spi.c b/drivers/spi/mpc52xx_psc_spi.c
index f50c81d..0474786 100644
--- a/drivers/spi/mpc52xx_psc_spi.c
+++ b/drivers/spi/mpc52xx_psc_spi.c
@@ -503,7 +503,7 @@
return mpc52xx_psc_spi_do_remove(&op->dev);
}
-static struct of_device_id mpc52xx_psc_spi_of_match[] = {
+static const struct of_device_id mpc52xx_psc_spi_of_match[] = {
{ .compatible = "fsl,mpc5200-psc-spi", },
{ .compatible = "mpc5200-psc-spi", }, /* old */
{}
diff --git a/drivers/spi/mpc52xx_spi.c b/drivers/spi/mpc52xx_spi.c
index 45bfe64..6eab465 100644
--- a/drivers/spi/mpc52xx_spi.c
+++ b/drivers/spi/mpc52xx_spi.c
@@ -550,7 +550,7 @@
return 0;
}
-static struct of_device_id mpc52xx_spi_match[] __devinitdata = {
+static const struct of_device_id mpc52xx_spi_match[] __devinitconst = {
{ .compatible = "fsl,mpc5200-spi", },
{}
};
diff --git a/drivers/spi/spi_imx.c b/drivers/spi/spi_imx.c
index 1893f1e..0ddbbe4 100644
--- a/drivers/spi/spi_imx.c
+++ b/drivers/spi/spi_imx.c
@@ -469,7 +469,7 @@
struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master);
int gpio = spi_imx->chipselect[spi->chip_select];
- pr_debug("%s: mode %d, %u bpw, %d hz\n", __func__,
+ dev_dbg(&spi->dev, "%s: mode %d, %u bpw, %d hz\n", __func__,
spi->mode, spi->bits_per_word, spi->max_speed_hz);
if (gpio >= 0)
diff --git a/drivers/spi/spi_mpc8xxx.c b/drivers/spi/spi_mpc8xxx.c
index 1fb2a6e..4f0cc9d 100644
--- a/drivers/spi/spi_mpc8xxx.c
+++ b/drivers/spi/spi_mpc8xxx.c
@@ -365,7 +365,7 @@
if ((mpc8xxx_spi->spibrg / hz) > 64) {
cs->hw_mode |= SPMODE_DIV16;
- pm = mpc8xxx_spi->spibrg / (hz * 64);
+ pm = (mpc8xxx_spi->spibrg - 1) / (hz * 64) + 1;
WARN_ONCE(pm > 16, "%s: Requested speed is too low: %d Hz. "
"Will use %d Hz instead.\n", dev_name(&spi->dev),
@@ -373,7 +373,7 @@
if (pm > 16)
pm = 16;
} else
- pm = mpc8xxx_spi->spibrg / (hz * 4);
+ pm = (mpc8xxx_spi->spibrg - 1) / (hz * 4) + 1;
if (pm)
pm--;
@@ -1328,7 +1328,7 @@
static int __devinit plat_mpc8xxx_spi_probe(struct platform_device *pdev)
{
struct resource *mem;
- unsigned int irq;
+ int irq;
struct spi_master *master;
if (!pdev->dev.platform_data)
@@ -1339,7 +1339,7 @@
return -EINVAL;
irq = platform_get_irq(pdev, 0);
- if (!irq)
+ if (irq <= 0)
return -EINVAL;
master = mpc8xxx_spi_probe(&pdev->dev, mem, irq);
diff --git a/drivers/spi/spi_ppc4xx.c b/drivers/spi/spi_ppc4xx.c
index 140a18d..6d8d402 100644
--- a/drivers/spi/spi_ppc4xx.c
+++ b/drivers/spi/spi_ppc4xx.c
@@ -578,7 +578,7 @@
return 0;
}
-static struct of_device_id spi_ppc4xx_of_match[] = {
+static const struct of_device_id spi_ppc4xx_of_match[] = {
{ .compatible = "ibm,ppc4xx-spi", },
{},
};
diff --git a/drivers/spi/spi_s3c64xx.c b/drivers/spi/spi_s3c64xx.c
index 88a456d..9736581 100644
--- a/drivers/spi/spi_s3c64xx.c
+++ b/drivers/spi/spi_s3c64xx.c
@@ -28,7 +28,7 @@
#include <linux/spi/spi.h>
#include <mach/dma.h>
-#include <plat/spi.h>
+#include <plat/s3c64xx-spi.h>
/* Registers and bit-fields */
@@ -137,6 +137,7 @@
/**
* struct s3c64xx_spi_driver_data - Runtime info holder for SPI driver.
* @clk: Pointer to the spi clock.
+ * @src_clk: Pointer to the clock used to generate SPI signals.
* @master: Pointer to the SPI Protocol master.
* @workqueue: Work queue for the SPI xfer requests.
* @cntrlr_info: Platform specific data for the controller this driver manages.
@@ -157,10 +158,11 @@
struct s3c64xx_spi_driver_data {
void __iomem *regs;
struct clk *clk;
+ struct clk *src_clk;
struct platform_device *pdev;
struct spi_master *master;
struct workqueue_struct *workqueue;
- struct s3c64xx_spi_cntrlr_info *cntrlr_info;
+ struct s3c64xx_spi_info *cntrlr_info;
struct spi_device *tgl_spi;
struct work_struct work;
struct list_head queue;
@@ -180,7 +182,7 @@
static void flush_fifo(struct s3c64xx_spi_driver_data *sdd)
{
- struct s3c64xx_spi_cntrlr_info *sci = sdd->cntrlr_info;
+ struct s3c64xx_spi_info *sci = sdd->cntrlr_info;
void __iomem *regs = sdd->regs;
unsigned long loops;
u32 val;
@@ -225,7 +227,7 @@
struct spi_device *spi,
struct spi_transfer *xfer, int dma_mode)
{
- struct s3c64xx_spi_cntrlr_info *sci = sdd->cntrlr_info;
+ struct s3c64xx_spi_info *sci = sdd->cntrlr_info;
void __iomem *regs = sdd->regs;
u32 modecfg, chcfg;
@@ -298,19 +300,20 @@
if (sdd->tgl_spi != spi) { /* if last mssg on diff device */
/* Deselect the last toggled device */
cs = sdd->tgl_spi->controller_data;
- cs->set_level(spi->mode & SPI_CS_HIGH ? 0 : 1);
+ cs->set_level(cs->line,
+ spi->mode & SPI_CS_HIGH ? 0 : 1);
}
sdd->tgl_spi = NULL;
}
cs = spi->controller_data;
- cs->set_level(spi->mode & SPI_CS_HIGH ? 1 : 0);
+ cs->set_level(cs->line, spi->mode & SPI_CS_HIGH ? 1 : 0);
}
static int wait_for_xfer(struct s3c64xx_spi_driver_data *sdd,
struct spi_transfer *xfer, int dma_mode)
{
- struct s3c64xx_spi_cntrlr_info *sci = sdd->cntrlr_info;
+ struct s3c64xx_spi_info *sci = sdd->cntrlr_info;
void __iomem *regs = sdd->regs;
unsigned long val;
int ms;
@@ -384,12 +387,11 @@
if (sdd->tgl_spi == spi)
sdd->tgl_spi = NULL;
- cs->set_level(spi->mode & SPI_CS_HIGH ? 0 : 1);
+ cs->set_level(cs->line, spi->mode & SPI_CS_HIGH ? 0 : 1);
}
static void s3c64xx_spi_config(struct s3c64xx_spi_driver_data *sdd)
{
- struct s3c64xx_spi_cntrlr_info *sci = sdd->cntrlr_info;
void __iomem *regs = sdd->regs;
u32 val;
@@ -435,7 +437,7 @@
/* Configure Clock */
val = readl(regs + S3C64XX_SPI_CLK_CFG);
val &= ~S3C64XX_SPI_PSR_MASK;
- val |= ((clk_get_rate(sci->src_clk) / sdd->cur_speed / 2 - 1)
+ val |= ((clk_get_rate(sdd->src_clk) / sdd->cur_speed / 2 - 1)
& S3C64XX_SPI_PSR_MASK);
writel(val, regs + S3C64XX_SPI_CLK_CFG);
@@ -558,7 +560,7 @@
static void handle_msg(struct s3c64xx_spi_driver_data *sdd,
struct spi_message *msg)
{
- struct s3c64xx_spi_cntrlr_info *sci = sdd->cntrlr_info;
+ struct s3c64xx_spi_info *sci = sdd->cntrlr_info;
struct spi_device *spi = msg->spi;
struct s3c64xx_spi_csinfo *cs = spi->controller_data;
struct spi_transfer *xfer;
@@ -632,8 +634,8 @@
S3C64XX_SPI_DEACT(sdd);
if (status) {
- dev_err(&spi->dev, "I/O Error: \
- rx-%d tx-%d res:rx-%c tx-%c len-%d\n",
+ dev_err(&spi->dev, "I/O Error: "
+ "rx-%d tx-%d res:rx-%c tx-%c len-%d\n",
xfer->rx_buf ? 1 : 0, xfer->tx_buf ? 1 : 0,
(sdd->state & RXBUSY) ? 'f' : 'p',
(sdd->state & TXBUSY) ? 'f' : 'p',
@@ -786,7 +788,7 @@
{
struct s3c64xx_spi_csinfo *cs = spi->controller_data;
struct s3c64xx_spi_driver_data *sdd;
- struct s3c64xx_spi_cntrlr_info *sci;
+ struct s3c64xx_spi_info *sci;
struct spi_message *msg;
u32 psr, speed;
unsigned long flags;
@@ -831,17 +833,17 @@
}
/* Check if we can provide the requested rate */
- speed = clk_get_rate(sci->src_clk) / 2 / (0 + 1); /* Max possible */
+ speed = clk_get_rate(sdd->src_clk) / 2 / (0 + 1); /* Max possible */
if (spi->max_speed_hz > speed)
spi->max_speed_hz = speed;
- psr = clk_get_rate(sci->src_clk) / 2 / spi->max_speed_hz - 1;
+ psr = clk_get_rate(sdd->src_clk) / 2 / spi->max_speed_hz - 1;
psr &= S3C64XX_SPI_PSR_MASK;
if (psr == S3C64XX_SPI_PSR_MASK)
psr--;
- speed = clk_get_rate(sci->src_clk) / 2 / (psr + 1);
+ speed = clk_get_rate(sdd->src_clk) / 2 / (psr + 1);
if (spi->max_speed_hz < speed) {
if (psr+1 < S3C64XX_SPI_PSR_MASK) {
psr++;
@@ -851,7 +853,7 @@
}
}
- speed = clk_get_rate(sci->src_clk) / 2 / (psr + 1);
+ speed = clk_get_rate(sdd->src_clk) / 2 / (psr + 1);
if (spi->max_speed_hz >= speed)
spi->max_speed_hz = speed;
else
@@ -867,7 +869,7 @@
static void s3c64xx_spi_hwinit(struct s3c64xx_spi_driver_data *sdd, int channel)
{
- struct s3c64xx_spi_cntrlr_info *sci = sdd->cntrlr_info;
+ struct s3c64xx_spi_info *sci = sdd->cntrlr_info;
void __iomem *regs = sdd->regs;
unsigned int val;
@@ -902,7 +904,7 @@
{
struct resource *mem_res, *dmatx_res, *dmarx_res;
struct s3c64xx_spi_driver_data *sdd;
- struct s3c64xx_spi_cntrlr_info *sci;
+ struct s3c64xx_spi_info *sci;
struct spi_master *master;
int ret;
@@ -1000,18 +1002,15 @@
goto err4;
}
- if (sci->src_clk_nr == S3C64XX_SPI_SRCCLK_PCLK)
- sci->src_clk = sdd->clk;
- else
- sci->src_clk = clk_get(&pdev->dev, sci->src_clk_name);
- if (IS_ERR(sci->src_clk)) {
+ sdd->src_clk = clk_get(&pdev->dev, sci->src_clk_name);
+ if (IS_ERR(sdd->src_clk)) {
dev_err(&pdev->dev,
"Unable to acquire clock '%s'\n", sci->src_clk_name);
- ret = PTR_ERR(sci->src_clk);
+ ret = PTR_ERR(sdd->src_clk);
goto err5;
}
- if (sci->src_clk != sdd->clk && clk_enable(sci->src_clk)) {
+ if (clk_enable(sdd->src_clk)) {
dev_err(&pdev->dev, "Couldn't enable clock '%s'\n",
sci->src_clk_name);
ret = -EBUSY;
@@ -1040,11 +1039,10 @@
goto err8;
}
- dev_dbg(&pdev->dev, "Samsung SoC SPI Driver loaded for Bus SPI-%d \
- with %d Slaves attached\n",
+ dev_dbg(&pdev->dev, "Samsung SoC SPI Driver loaded for Bus SPI-%d "
+ "with %d Slaves attached\n",
pdev->id, master->num_chipselect);
- dev_dbg(&pdev->dev, "\tIOmem=[0x%x-0x%x]\
- \tDMA=[Rx-%d, Tx-%d]\n",
+ dev_dbg(&pdev->dev, "\tIOmem=[0x%x-0x%x]\tDMA=[Rx-%d, Tx-%d]\n",
mem_res->end, mem_res->start,
sdd->rx_dmach, sdd->tx_dmach);
@@ -1053,11 +1051,9 @@
err8:
destroy_workqueue(sdd->workqueue);
err7:
- if (sci->src_clk != sdd->clk)
- clk_disable(sci->src_clk);
+ clk_disable(sdd->src_clk);
err6:
- if (sci->src_clk != sdd->clk)
- clk_put(sci->src_clk);
+ clk_put(sdd->src_clk);
err5:
clk_disable(sdd->clk);
err4:
@@ -1078,7 +1074,6 @@
{
struct spi_master *master = spi_master_get(platform_get_drvdata(pdev));
struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master);
- struct s3c64xx_spi_cntrlr_info *sci = sdd->cntrlr_info;
struct resource *mem_res;
unsigned long flags;
@@ -1093,11 +1088,8 @@
destroy_workqueue(sdd->workqueue);
- if (sci->src_clk != sdd->clk)
- clk_disable(sci->src_clk);
-
- if (sci->src_clk != sdd->clk)
- clk_put(sci->src_clk);
+ clk_disable(sdd->src_clk);
+ clk_put(sdd->src_clk);
clk_disable(sdd->clk);
clk_put(sdd->clk);
@@ -1105,7 +1097,8 @@
iounmap((void *) sdd->regs);
mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- release_mem_region(mem_res->start, resource_size(mem_res));
+ if (mem_res != NULL)
+ release_mem_region(mem_res->start, resource_size(mem_res));
platform_set_drvdata(pdev, NULL);
spi_master_put(master);
@@ -1118,8 +1111,6 @@
{
struct spi_master *master = spi_master_get(platform_get_drvdata(pdev));
struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master);
- struct s3c64xx_spi_cntrlr_info *sci = sdd->cntrlr_info;
- struct s3c64xx_spi_csinfo *cs;
unsigned long flags;
spin_lock_irqsave(&sdd->lock, flags);
@@ -1130,9 +1121,7 @@
msleep(10);
/* Disable the clock */
- if (sci->src_clk != sdd->clk)
- clk_disable(sci->src_clk);
-
+ clk_disable(sdd->src_clk);
clk_disable(sdd->clk);
sdd->cur_speed = 0; /* Output Clock is stopped */
@@ -1144,15 +1133,13 @@
{
struct spi_master *master = spi_master_get(platform_get_drvdata(pdev));
struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master);
- struct s3c64xx_spi_cntrlr_info *sci = sdd->cntrlr_info;
+ struct s3c64xx_spi_info *sci = sdd->cntrlr_info;
unsigned long flags;
sci->cfg_gpio(pdev);
/* Enable the clock */
- if (sci->src_clk != sdd->clk)
- clk_enable(sci->src_clk);
-
+ clk_enable(sdd->src_clk);
clk_enable(sdd->clk);
s3c64xx_spi_hwinit(sdd, pdev->id);
diff --git a/drivers/spi/spi_sh_msiof.c b/drivers/spi/spi_sh_msiof.c
index 30973ec..d93b667 100644
--- a/drivers/spi/spi_sh_msiof.c
+++ b/drivers/spi/spi_sh_msiof.c
@@ -20,12 +20,12 @@
#include <linux/bitmap.h>
#include <linux/clk.h>
#include <linux/io.h>
+#include <linux/err.h>
#include <linux/spi/spi.h>
#include <linux/spi/spi_bitbang.h>
#include <linux/spi/sh_msiof.h>
-#include <asm/spi.h>
#include <asm/unaligned.h>
struct sh_msiof_spi_priv {
diff --git a/drivers/spi/spi_stmp.c b/drivers/spi/spi_stmp.c
index 2552bb3..fadff76 100644
--- a/drivers/spi/spi_stmp.c
+++ b/drivers/spi/spi_stmp.c
@@ -76,7 +76,7 @@
break; \
} \
cpu_relax(); \
- } while (time_before(end_jiffies, jiffies)); \
+ } while (time_before(jiffies, end_jiffies)); \
succeeded; \
})
diff --git a/drivers/spi/xilinx_spi.c b/drivers/spi/xilinx_spi.c
index 9f38637..1b47363 100644
--- a/drivers/spi/xilinx_spi.c
+++ b/drivers/spi/xilinx_spi.c
@@ -93,6 +93,26 @@
void (*rx_fn) (struct xilinx_spi *);
};
+static void xspi_write32(u32 val, void __iomem *addr)
+{
+ iowrite32(val, addr);
+}
+
+static unsigned int xspi_read32(void __iomem *addr)
+{
+ return ioread32(addr);
+}
+
+static void xspi_write32_be(u32 val, void __iomem *addr)
+{
+ iowrite32be(val, addr);
+}
+
+static unsigned int xspi_read32_be(void __iomem *addr)
+{
+ return ioread32be(addr);
+}
+
static void xspi_tx8(struct xilinx_spi *xspi)
{
xspi->write_fn(*xspi->tx_ptr, xspi->regs + XSPI_TXD_OFFSET);
@@ -374,11 +394,11 @@
xspi->mem = *mem;
xspi->irq = irq;
if (pdata->little_endian) {
- xspi->read_fn = ioread32;
- xspi->write_fn = iowrite32;
+ xspi->read_fn = xspi_read32;
+ xspi->write_fn = xspi_write32;
} else {
- xspi->read_fn = ioread32be;
- xspi->write_fn = iowrite32be;
+ xspi->read_fn = xspi_read32_be;
+ xspi->write_fn = xspi_write32_be;
}
xspi->bits_per_word = pdata->bits_per_word;
if (xspi->bits_per_word == 8) {
diff --git a/drivers/spi/xilinx_spi_of.c b/drivers/spi/xilinx_spi_of.c
index 71dc3ad..ed34a8d 100644
--- a/drivers/spi/xilinx_spi_of.c
+++ b/drivers/spi/xilinx_spi_of.c
@@ -99,7 +99,7 @@
return xilinx_spi_remove(op);
}
-static struct of_device_id xilinx_spi_of_match[] = {
+static const struct of_device_id xilinx_spi_of_match[] = {
{ .compatible = "xlnx,xps-spi-2.00.a", },
{ .compatible = "xlnx,xps-spi-2.00.b", },
{}
diff --git a/drivers/staging/go7007/s2250-board.c b/drivers/staging/go7007/s2250-board.c
index 8cf7f27..c324f6e 100644
--- a/drivers/staging/go7007/s2250-board.c
+++ b/drivers/staging/go7007/s2250-board.c
@@ -159,7 +159,7 @@
struct go7007 *go = i2c_get_adapdata(client->adapter);
struct go7007_usb *usb;
int rc;
- int dev_addr = client->addr;
+ int dev_addr = client->addr << 1; /* firmware wants 8-bit address */
u8 *buf;
if (go == NULL)
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index e9f9954..bbeeb92 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -78,7 +78,7 @@
MODULE_DESCRIPTION("USB Mass Storage driver for Linux");
MODULE_LICENSE("GPL");
-static unsigned int delay_use = 5;
+static unsigned int delay_use = 1;
module_param(delay_use, uint, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(delay_use, "seconds to delay before using a new device");
diff --git a/drivers/video/aty/aty128fb.c b/drivers/video/aty/aty128fb.c
index e4e4d43..9ee67d6 100644
--- a/drivers/video/aty/aty128fb.c
+++ b/drivers/video/aty/aty128fb.c
@@ -1931,22 +1931,22 @@
* PowerMac2,2 summer 2000 iMacs
* PowerMac4,1 january 2001 iMacs "flower power"
*/
- if (machine_is_compatible("PowerMac2,1") ||
- machine_is_compatible("PowerMac2,2") ||
- machine_is_compatible("PowerMac4,1"))
+ if (of_machine_is_compatible("PowerMac2,1") ||
+ of_machine_is_compatible("PowerMac2,2") ||
+ of_machine_is_compatible("PowerMac4,1"))
default_vmode = VMODE_1024_768_75;
/* iBook SE */
- if (machine_is_compatible("PowerBook2,2"))
+ if (of_machine_is_compatible("PowerBook2,2"))
default_vmode = VMODE_800_600_60;
/* PowerBook Firewire (Pismo), iBook Dual USB */
- if (machine_is_compatible("PowerBook3,1") ||
- machine_is_compatible("PowerBook4,1"))
+ if (of_machine_is_compatible("PowerBook3,1") ||
+ of_machine_is_compatible("PowerBook4,1"))
default_vmode = VMODE_1024_768_60;
/* PowerBook Titanium */
- if (machine_is_compatible("PowerBook3,2"))
+ if (of_machine_is_compatible("PowerBook3,2"))
default_vmode = VMODE_1152_768_60;
if (default_cmode > 16)
diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/aty/atyfb_base.c
index 1ddeb4c..e45ab8d 100644
--- a/drivers/video/aty/atyfb_base.c
+++ b/drivers/video/aty/atyfb_base.c
@@ -2439,7 +2439,7 @@
* The Apple iBook1 uses non-standard memory frequencies.
* We detect it and set the frequency manually.
*/
- if (machine_is_compatible("PowerBook2,1")) {
+ if (of_machine_is_compatible("PowerBook2,1")) {
par->pll_limits.mclk = 70;
par->pll_limits.xclk = 53;
}
@@ -2659,7 +2659,7 @@
FBINFO_HWACCEL_YPAN;
#ifdef CONFIG_PMAC_BACKLIGHT
- if (M64_HAS(G3_PB_1_1) && machine_is_compatible("PowerBook1,1")) {
+ if (M64_HAS(G3_PB_1_1) && of_machine_is_compatible("PowerBook1,1")) {
/*
* these bits let the 101 powerbook
* wake up from sleep -- paulus
@@ -2690,9 +2690,9 @@
if (M64_HAS(G3_PB_1024x768))
/* G3 PowerBook with 1024x768 LCD */
default_vmode = VMODE_1024_768_60;
- else if (machine_is_compatible("iMac"))
+ else if (of_machine_is_compatible("iMac"))
default_vmode = VMODE_1024_768_75;
- else if (machine_is_compatible("PowerBook2,1"))
+ else if (of_machine_is_compatible("PowerBook2,1"))
/* iBook with 800x600 LCD */
default_vmode = VMODE_800_600_60;
else
@@ -3104,7 +3104,7 @@
}
dp = pci_device_to_OF_node(pdev);
- if (node == dp->node) {
+ if (node == dp->phandle) {
struct fb_var_screeninfo *var = &default_var;
unsigned int N, P, Q, M, T, R;
u32 v_total, h_total;
diff --git a/drivers/video/aty/radeon_backlight.c b/drivers/video/aty/radeon_backlight.c
index 1a056ad..fa1198c 100644
--- a/drivers/video/aty/radeon_backlight.c
+++ b/drivers/video/aty/radeon_backlight.c
@@ -175,9 +175,9 @@
#ifdef CONFIG_PMAC_BACKLIGHT
pdata->negative = pdata->negative ||
- machine_is_compatible("PowerBook4,3") ||
- machine_is_compatible("PowerBook6,3") ||
- machine_is_compatible("PowerBook6,5");
+ of_machine_is_compatible("PowerBook4,3") ||
+ of_machine_is_compatible("PowerBook6,3") ||
+ of_machine_is_compatible("PowerBook6,5");
#endif
rinfo->info->bl_dev = bd;
diff --git a/drivers/video/pvr2fb.c b/drivers/video/pvr2fb.c
index 53f8f11..f997510 100644
--- a/drivers/video/pvr2fb.c
+++ b/drivers/video/pvr2fb.c
@@ -831,7 +831,7 @@
printk(KERN_NOTICE "fb%d: registering with SQ API\n", fb_info->node);
pvr2fb_map = sq_remap(fb_info->fix.smem_start, fb_info->fix.smem_len,
- fb_info->fix.id, pgprot_val(PAGE_SHARED));
+ fb_info->fix.id, PAGE_SHARED);
printk(KERN_NOTICE "fb%d: Mapped video memory to SQ addr 0x%lx\n",
fb_info->node, pvr2fb_map);
diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c
index a69830d..8d7653e 100644
--- a/drivers/video/sh_mobile_lcdcfb.c
+++ b/drivers/video/sh_mobile_lcdcfb.c
@@ -19,6 +19,7 @@
#include <linux/dma-mapping.h>
#include <linux/interrupt.h>
#include <linux/vmalloc.h>
+#include <linux/ioctl.h>
#include <video/sh_mobile_lcdc.h>
#include <asm/atomic.h>
@@ -106,6 +107,7 @@
#define LDRCNTR_SRC 0x00010000
#define LDRCNTR_MRS 0x00000002
#define LDRCNTR_MRC 0x00000001
+#define LDSR_MRS 0x00000100
struct sh_mobile_lcdc_priv;
struct sh_mobile_lcdc_chan {
@@ -122,8 +124,8 @@
struct scatterlist *sglist;
unsigned long frame_end;
unsigned long pan_offset;
- unsigned long new_pan_offset;
wait_queue_head_t frame_end_wait;
+ struct completion vsync_completion;
};
struct sh_mobile_lcdc_priv {
@@ -366,19 +368,8 @@
}
/* VSYNC End */
- if (ldintr & LDINTR_VES) {
- unsigned long ldrcntr = lcdc_read(priv, _LDRCNTR);
- /* Set the source address for the next refresh */
- lcdc_write_chan_mirror(ch, LDSA1R, ch->dma_handle +
- ch->new_pan_offset);
- if (lcdc_chan_is_sublcd(ch))
- lcdc_write(ch->lcdc, _LDRCNTR,
- ldrcntr ^ LDRCNTR_SRS);
- else
- lcdc_write(ch->lcdc, _LDRCNTR,
- ldrcntr ^ LDRCNTR_MRS);
- ch->pan_offset = ch->new_pan_offset;
- }
+ if (ldintr & LDINTR_VES)
+ complete(&ch->vsync_completion);
}
return IRQ_HANDLED;
@@ -767,25 +758,69 @@
struct fb_info *info)
{
struct sh_mobile_lcdc_chan *ch = info->par;
+ struct sh_mobile_lcdc_priv *priv = ch->lcdc;
+ unsigned long ldrcntr;
+ unsigned long new_pan_offset;
- if (info->var.xoffset == var->xoffset &&
- info->var.yoffset == var->yoffset)
- return 0; /* No change, do nothing */
-
- ch->new_pan_offset = (var->yoffset * info->fix.line_length) +
+ new_pan_offset = (var->yoffset * info->fix.line_length) +
(var->xoffset * (info->var.bits_per_pixel / 8));
- if (ch->new_pan_offset != ch->pan_offset) {
- unsigned long ldintr;
- ldintr = lcdc_read(ch->lcdc, _LDINTR);
- ldintr |= LDINTR_VEE;
- lcdc_write(ch->lcdc, _LDINTR, ldintr);
- sh_mobile_lcdc_deferred_io_touch(info);
- }
+ if (new_pan_offset == ch->pan_offset)
+ return 0; /* No change, do nothing */
+
+ ldrcntr = lcdc_read(priv, _LDRCNTR);
+
+ /* Set the source address for the next refresh */
+ lcdc_write_chan_mirror(ch, LDSA1R, ch->dma_handle + new_pan_offset);
+ if (lcdc_chan_is_sublcd(ch))
+ lcdc_write(ch->lcdc, _LDRCNTR, ldrcntr ^ LDRCNTR_SRS);
+ else
+ lcdc_write(ch->lcdc, _LDRCNTR, ldrcntr ^ LDRCNTR_MRS);
+
+ ch->pan_offset = new_pan_offset;
+
+ sh_mobile_lcdc_deferred_io_touch(info);
return 0;
}
+static int sh_mobile_wait_for_vsync(struct fb_info *info)
+{
+ struct sh_mobile_lcdc_chan *ch = info->par;
+ unsigned long ldintr;
+ int ret;
+
+ /* Enable VSync End interrupt */
+ ldintr = lcdc_read(ch->lcdc, _LDINTR);
+ ldintr |= LDINTR_VEE;
+ lcdc_write(ch->lcdc, _LDINTR, ldintr);
+
+ ret = wait_for_completion_interruptible_timeout(&ch->vsync_completion,
+ msecs_to_jiffies(100));
+ if (!ret)
+ return -ETIMEDOUT;
+
+ return 0;
+}
+
+static int sh_mobile_ioctl(struct fb_info *info, unsigned int cmd,
+ unsigned long arg)
+{
+ int retval;
+
+ switch (cmd) {
+ case FBIO_WAITFORVSYNC:
+ retval = sh_mobile_wait_for_vsync(info);
+ break;
+
+ default:
+ retval = -ENOIOCTLCMD;
+ break;
+ }
+ return retval;
+}
+
+
static struct fb_ops sh_mobile_lcdc_ops = {
.owner = THIS_MODULE,
.fb_setcolreg = sh_mobile_lcdc_setcolreg,
@@ -795,6 +830,7 @@
.fb_copyarea = sh_mobile_lcdc_copyarea,
.fb_imageblit = sh_mobile_lcdc_imageblit,
.fb_pan_display = sh_mobile_fb_pan_display,
+ .fb_ioctl = sh_mobile_ioctl,
};
static int sh_mobile_lcdc_set_bpp(struct fb_var_screeninfo *var, int bpp)
@@ -962,8 +998,8 @@
goto err1;
}
init_waitqueue_head(&priv->ch[i].frame_end_wait);
+ init_completion(&priv->ch[i].vsync_completion);
priv->ch[j].pan_offset = 0;
- priv->ch[j].new_pan_offset = 0;
switch (pdata->ch[i].chan) {
case LCDC_CHAN_MAINLCD:
diff --git a/drivers/virtio/virtio_balloon.c b/drivers/virtio/virtio_balloon.c
index 505be88..369f2ee 100644
--- a/drivers/virtio/virtio_balloon.c
+++ b/drivers/virtio/virtio_balloon.c
@@ -28,7 +28,7 @@
struct virtio_balloon
{
struct virtio_device *vdev;
- struct virtqueue *inflate_vq, *deflate_vq;
+ struct virtqueue *inflate_vq, *deflate_vq, *stats_vq;
/* Where the ballooning thread waits for config to change. */
wait_queue_head_t config_change;
@@ -49,6 +49,10 @@
/* The array of pfns we tell the Host about. */
unsigned int num_pfns;
u32 pfns[256];
+
+ /* Memory statistics */
+ int need_stats_update;
+ struct virtio_balloon_stat stats[VIRTIO_BALLOON_S_NR];
};
static struct virtio_device_id id_table[] = {
@@ -154,6 +158,72 @@
}
}
+static inline void update_stat(struct virtio_balloon *vb, int idx,
+ u16 tag, u64 val)
+{
+ BUG_ON(idx >= VIRTIO_BALLOON_S_NR);
+ vb->stats[idx].tag = tag;
+ vb->stats[idx].val = val;
+}
+
+#define pages_to_bytes(x) ((u64)(x) << PAGE_SHIFT)
+
+static void update_balloon_stats(struct virtio_balloon *vb)
+{
+ unsigned long events[NR_VM_EVENT_ITEMS];
+ struct sysinfo i;
+ int idx = 0;
+
+ all_vm_events(events);
+ si_meminfo(&i);
+
+ update_stat(vb, idx++, VIRTIO_BALLOON_S_SWAP_IN,
+ pages_to_bytes(events[PSWPIN]));
+ update_stat(vb, idx++, VIRTIO_BALLOON_S_SWAP_OUT,
+ pages_to_bytes(events[PSWPOUT]));
+ update_stat(vb, idx++, VIRTIO_BALLOON_S_MAJFLT, events[PGMAJFAULT]);
+ update_stat(vb, idx++, VIRTIO_BALLOON_S_MINFLT, events[PGFAULT]);
+ update_stat(vb, idx++, VIRTIO_BALLOON_S_MEMFREE,
+ pages_to_bytes(i.freeram));
+ update_stat(vb, idx++, VIRTIO_BALLOON_S_MEMTOT,
+ pages_to_bytes(i.totalram));
+}
+
+/*
+ * While most virtqueues communicate guest-initiated requests to the hypervisor,
+ * the stats queue operates in reverse. The driver initializes the virtqueue
+ * with a single buffer. From that point forward, all conversations consist of
+ * a hypervisor request (a call to this function) which directs us to refill
+ * the virtqueue with a fresh stats buffer. Since stats collection can sleep,
+ * we notify our kthread which does the actual work via stats_handle_request().
+ */
+static void stats_request(struct virtqueue *vq)
+{
+ struct virtio_balloon *vb;
+ unsigned int len;
+
+ vb = vq->vq_ops->get_buf(vq, &len);
+ if (!vb)
+ return;
+ vb->need_stats_update = 1;
+ wake_up(&vb->config_change);
+}
+
+static void stats_handle_request(struct virtio_balloon *vb)
+{
+ struct virtqueue *vq;
+ struct scatterlist sg;
+
+ vb->need_stats_update = 0;
+ update_balloon_stats(vb);
+
+ vq = vb->stats_vq;
+ sg_init_one(&sg, vb->stats, sizeof(vb->stats));
+ if (vq->vq_ops->add_buf(vq, &sg, 1, 0, vb) < 0)
+ BUG();
+ vq->vq_ops->kick(vq);
+}
+
static void virtballoon_changed(struct virtio_device *vdev)
{
struct virtio_balloon *vb = vdev->priv;
@@ -190,8 +260,11 @@
try_to_freeze();
wait_event_interruptible(vb->config_change,
(diff = towards_target(vb)) != 0
+ || vb->need_stats_update
|| kthread_should_stop()
|| freezing(current));
+ if (vb->need_stats_update)
+ stats_handle_request(vb);
if (diff > 0)
fill_balloon(vb, diff);
else if (diff < 0)
@@ -204,10 +277,10 @@
static int virtballoon_probe(struct virtio_device *vdev)
{
struct virtio_balloon *vb;
- struct virtqueue *vqs[2];
- vq_callback_t *callbacks[] = { balloon_ack, balloon_ack };
- const char *names[] = { "inflate", "deflate" };
- int err;
+ struct virtqueue *vqs[3];
+ vq_callback_t *callbacks[] = { balloon_ack, balloon_ack, stats_request };
+ const char *names[] = { "inflate", "deflate", "stats" };
+ int err, nvqs;
vdev->priv = vb = kmalloc(sizeof(*vb), GFP_KERNEL);
if (!vb) {
@@ -219,14 +292,31 @@
vb->num_pages = 0;
init_waitqueue_head(&vb->config_change);
vb->vdev = vdev;
+ vb->need_stats_update = 0;
- /* We expect two virtqueues. */
- err = vdev->config->find_vqs(vdev, 2, vqs, callbacks, names);
+ /* We expect two virtqueues: inflate and deflate,
+ * and optionally stat. */
+ nvqs = virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_STATS_VQ) ? 3 : 2;
+ err = vdev->config->find_vqs(vdev, nvqs, vqs, callbacks, names);
if (err)
goto out_free_vb;
vb->inflate_vq = vqs[0];
vb->deflate_vq = vqs[1];
+ if (virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_STATS_VQ)) {
+ struct scatterlist sg;
+ vb->stats_vq = vqs[2];
+
+ /*
+ * Prime this virtqueue with one buffer so the hypervisor can
+ * use it to signal us later.
+ */
+ sg_init_one(&sg, vb->stats, sizeof vb->stats);
+ if (vb->stats_vq->vq_ops->add_buf(vb->stats_vq,
+ &sg, 1, 0, vb) < 0)
+ BUG();
+ vb->stats_vq->vq_ops->kick(vb->stats_vq);
+ }
vb->thread = kthread_run(balloon, vb, "vballoon");
if (IS_ERR(vb->thread)) {
@@ -264,7 +354,10 @@
kfree(vb);
}
-static unsigned int features[] = { VIRTIO_BALLOON_F_MUST_TELL_HOST };
+static unsigned int features[] = {
+ VIRTIO_BALLOON_F_MUST_TELL_HOST,
+ VIRTIO_BALLOON_F_STATS_VQ,
+};
static struct virtio_driver virtio_balloon_driver = {
.feature_table = features,
diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c
index 28d9cf7..1d5191f 100644
--- a/drivers/virtio/virtio_pci.c
+++ b/drivers/virtio/virtio_pci.c
@@ -702,7 +702,7 @@
.name = "virtio-pci",
.id_table = virtio_pci_id_table,
.probe = virtio_pci_probe,
- .remove = virtio_pci_remove,
+ .remove = __devexit_p(virtio_pci_remove),
#ifdef CONFIG_PM
.suspend = virtio_pci_suspend,
.resume = virtio_pci_resume,
diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c
index fbd2ecd..0db906b 100644
--- a/drivers/virtio/virtio_ring.c
+++ b/drivers/virtio/virtio_ring.c
@@ -21,6 +21,24 @@
#include <linux/virtio_config.h>
#include <linux/device.h>
+/* virtio guest is communicating with a virtual "device" that actually runs on
+ * a host processor. Memory barriers are used to control SMP effects. */
+#ifdef CONFIG_SMP
+/* Where possible, use SMP barriers which are more lightweight than mandatory
+ * barriers, because mandatory barriers control MMIO effects on accesses
+ * through relaxed memory I/O windows (which virtio does not use). */
+#define virtio_mb() smp_mb()
+#define virtio_rmb() smp_rmb()
+#define virtio_wmb() smp_wmb()
+#else
+/* We must force memory ordering even if guest is UP since host could be
+ * running on another CPU, but SMP barriers are defined to barrier() in that
+ * configuration. So fall back to mandatory barriers instead. */
+#define virtio_mb() mb()
+#define virtio_rmb() rmb()
+#define virtio_wmb() wmb()
+#endif
+
#ifdef DEBUG
/* For development, we want to crash whenever the ring is screwed. */
#define BAD_RING(_vq, fmt, args...) \
@@ -36,10 +54,9 @@
panic("%s:in_use = %i\n", \
(_vq)->vq.name, (_vq)->in_use); \
(_vq)->in_use = __LINE__; \
- mb(); \
} while (0)
#define END_USE(_vq) \
- do { BUG_ON(!(_vq)->in_use); (_vq)->in_use = 0; mb(); } while(0)
+ do { BUG_ON(!(_vq)->in_use); (_vq)->in_use = 0; } while(0)
#else
#define BAD_RING(_vq, fmt, args...) \
do { \
@@ -221,13 +238,13 @@
START_USE(vq);
/* Descriptors and available array need to be set before we expose the
* new available array entries. */
- wmb();
+ virtio_wmb();
vq->vring.avail->idx += vq->num_added;
vq->num_added = 0;
/* Need to update avail index before checking if we should notify */
- mb();
+ virtio_mb();
if (!(vq->vring.used->flags & VRING_USED_F_NO_NOTIFY))
/* Prod other side to tell it about changes. */
@@ -286,7 +303,7 @@
}
/* Only get used array entries after they have been exposed by host. */
- rmb();
+ virtio_rmb();
i = vq->vring.used->ring[vq->last_used_idx%vq->vring.num].id;
*len = vq->vring.used->ring[vq->last_used_idx%vq->vring.num].len;
@@ -324,7 +341,7 @@
/* We optimistically turn back on interrupts, then check if there was
* more to do. */
vq->vring.avail->flags &= ~VRING_AVAIL_F_NO_INTERRUPT;
- mb();
+ virtio_mb();
if (unlikely(more_used(vq))) {
END_USE(vq);
return false;
@@ -334,6 +351,30 @@
return true;
}
+static void *vring_detach_unused_buf(struct virtqueue *_vq)
+{
+ struct vring_virtqueue *vq = to_vvq(_vq);
+ unsigned int i;
+ void *buf;
+
+ START_USE(vq);
+
+ for (i = 0; i < vq->vring.num; i++) {
+ if (!vq->data[i])
+ continue;
+ /* detach_buf clears data, so grab it now. */
+ buf = vq->data[i];
+ detach_buf(vq, i);
+ END_USE(vq);
+ return buf;
+ }
+ /* That should have freed everything. */
+ BUG_ON(vq->num_free != vq->vring.num);
+
+ END_USE(vq);
+ return NULL;
+}
+
irqreturn_t vring_interrupt(int irq, void *_vq)
{
struct vring_virtqueue *vq = to_vvq(_vq);
@@ -360,6 +401,7 @@
.kick = vring_kick,
.disable_cb = vring_disable_cb,
.enable_cb = vring_enable_cb,
+ .detach_unused_buf = vring_detach_unused_buf,
};
struct virtqueue *vring_new_virtqueue(unsigned int num,
@@ -406,8 +448,11 @@
/* Put everything in free lists. */
vq->num_free = num;
vq->free_head = 0;
- for (i = 0; i < num-1; i++)
+ for (i = 0; i < num-1; i++) {
vq->vring.desc[i].next = i+1;
+ vq->data[i] = NULL;
+ }
+ vq->data[i] = NULL;
return &vq->vq;
}
diff --git a/fs/proc/proc_devtree.c b/fs/proc/proc_devtree.c
index 123257b..f8650dc 100644
--- a/fs/proc/proc_devtree.c
+++ b/fs/proc/proc_devtree.c
@@ -10,16 +10,19 @@
#include <linux/seq_file.h>
#include <linux/stat.h>
#include <linux/string.h>
+#include <linux/of.h>
+#include <linux/module.h>
#include <asm/prom.h>
#include <asm/uaccess.h>
#include "internal.h"
-#ifndef HAVE_ARCH_DEVTREE_FIXUPS
static inline void set_node_proc_entry(struct device_node *np,
struct proc_dir_entry *de)
{
-}
+#ifdef HAVE_ARCH_DEVTREE_FIXUPS
+ np->pde = de;
#endif
+}
static struct proc_dir_entry *proc_device_tree;
diff --git a/fs/xfs/linux-2.6/xfs_buf.c b/fs/xfs/linux-2.6/xfs_buf.c
index d50df3a..6f76ba8 100644
--- a/fs/xfs/linux-2.6/xfs_buf.c
+++ b/fs/xfs/linux-2.6/xfs_buf.c
@@ -77,6 +77,27 @@
#define xfs_buf_deallocate(bp) \
kmem_zone_free(xfs_buf_zone, (bp));
+static inline int
+xfs_buf_is_vmapped(
+ struct xfs_buf *bp)
+{
+ /*
+ * Return true if the buffer is vmapped.
+ *
+ * The XBF_MAPPED flag is set if the buffer should be mapped, but the
+ * code is clever enough to know it doesn't have to map a single page,
+ * so the check has to be both for XBF_MAPPED and bp->b_page_count > 1.
+ */
+ return (bp->b_flags & XBF_MAPPED) && bp->b_page_count > 1;
+}
+
+static inline int
+xfs_buf_vmap_len(
+ struct xfs_buf *bp)
+{
+ return (bp->b_page_count * PAGE_SIZE) - bp->b_offset;
+}
+
/*
* Page Region interfaces.
*
@@ -315,7 +336,7 @@
if (bp->b_flags & (_XBF_PAGE_CACHE|_XBF_PAGES)) {
uint i;
- if ((bp->b_flags & XBF_MAPPED) && (bp->b_page_count > 1))
+ if (xfs_buf_is_vmapped(bp))
free_address(bp->b_addr - bp->b_offset);
for (i = 0; i < bp->b_page_count; i++) {
@@ -1236,6 +1257,9 @@
xfs_buf_ioerror(bp, -error);
+ if (!error && xfs_buf_is_vmapped(bp) && (bp->b_flags & XBF_READ))
+ invalidate_kernel_vmap_range(bp->b_addr, xfs_buf_vmap_len(bp));
+
do {
struct page *page = bvec->bv_page;
@@ -1345,6 +1369,10 @@
submit_io:
if (likely(bio->bi_size)) {
+ if (xfs_buf_is_vmapped(bp)) {
+ flush_kernel_vmap_range(bp->b_addr,
+ xfs_buf_vmap_len(bp));
+ }
submit_bio(rw, bio);
if (size)
goto next_chunk;
diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h
index 3cd9ccd..54508cc 100644
--- a/include/acpi/acpi_bus.h
+++ b/include/acpi/acpi_bus.h
@@ -242,6 +242,8 @@
struct acpi_device_wakeup_flags {
u8 valid:1; /* Can successfully enable wakeup? */
u8 run_wake:1; /* Run-Wake GPE devices */
+ u8 always_enabled:1; /* Run-wake devices that are always enabled */
+ u8 notifier_present:1; /* Wake-up notify handler has been installed */
};
struct acpi_device_wakeup_state {
@@ -256,6 +258,7 @@
struct acpi_device_wakeup_state state;
struct acpi_device_wakeup_flags flags;
int prepare_count;
+ int run_wake_count;
};
/* Device */
@@ -386,6 +389,9 @@
struct acpi_pci_root *acpi_pci_find_root(acpi_handle handle);
#define DEVICE_ACPI_HANDLE(dev) ((acpi_handle)((dev)->archdata.acpi_handle))
+int acpi_enable_wakeup_device_power(struct acpi_device *dev, int state);
+int acpi_disable_wakeup_device_power(struct acpi_device *dev);
+
#ifdef CONFIG_PM_SLEEP
int acpi_pm_device_sleep_state(struct device *, int *);
int acpi_pm_device_sleep_wake(struct device *, bool);
diff --git a/include/acpi/acpi_drivers.h b/include/acpi/acpi_drivers.h
index f4906f6..3a4767c 100644
--- a/include/acpi/acpi_drivers.h
+++ b/include/acpi/acpi_drivers.h
@@ -104,6 +104,7 @@
struct pci_bus *pci_acpi_scan_root(struct acpi_device *device, int domain,
int bus);
+void pci_acpi_crs_quirks(void);
/* --------------------------------------------------------------------------
Processor
diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h
index 86e9735..3988f93 100644
--- a/include/acpi/acpixf.h
+++ b/include/acpi/acpixf.h
@@ -281,11 +281,11 @@
/*
* GPE Interfaces
*/
-acpi_status acpi_set_gpe_type(acpi_handle gpe_device, u32 gpe_number, u8 type);
+acpi_status acpi_set_gpe(acpi_handle gpe_device, u32 gpe_number, u8 action);
-acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number);
+acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number, u8 type);
-acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number);
+acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number, u8 type);
acpi_status acpi_clear_gpe(acpi_handle gpe_device, u32 gpe_number, u32 flags);
diff --git a/include/acpi/actypes.h b/include/acpi/actypes.h
index 153f12d..73af408 100644
--- a/include/acpi/actypes.h
+++ b/include/acpi/actypes.h
@@ -668,15 +668,16 @@
/*
* GPE info flags - Per GPE
- * +-+-+-+---+---+-+
- * |7|6|5|4:3|2:1|0|
- * +-+-+-+---+---+-+
- * | | | | | |
- * | | | | | +--- Interrupt type: Edge or Level Triggered
- * | | | | +--- Type: Wake-only, Runtime-only, or wake/runtime
+ * +-+-+-+---+-+-+-+
+ * |7|6|5|4:3|2|1|0|
+ * +-+-+-+---+-+-+-+
+ * | | | | | | |
+ * | | | | | | +--- Interrupt type: Edge or Level Triggered
+ * | | | | | +--- GPE can wake the system
+ * | | | | +--- Unused
* | | | +--- Type of dispatch -- to method, handler, or none
- * | | +--- Enabled for runtime?
- * | +--- Enabled for wake?
+ * | | +--- Unused
+ * | +--- Unused
* +--- Unused
*/
#define ACPI_GPE_XRUPT_TYPE_MASK (u8) 0x01
@@ -687,22 +688,13 @@
#define ACPI_GPE_TYPE_WAKE_RUN (u8) 0x06
#define ACPI_GPE_TYPE_WAKE (u8) 0x02
#define ACPI_GPE_TYPE_RUNTIME (u8) 0x04 /* Default */
+#define ACPI_GPE_CAN_WAKE (u8) 0x02
#define ACPI_GPE_DISPATCH_MASK (u8) 0x18
#define ACPI_GPE_DISPATCH_HANDLER (u8) 0x08
#define ACPI_GPE_DISPATCH_METHOD (u8) 0x10
#define ACPI_GPE_DISPATCH_NOT_USED (u8) 0x00 /* Default */
-#define ACPI_GPE_RUN_ENABLE_MASK (u8) 0x20
-#define ACPI_GPE_RUN_ENABLED (u8) 0x20
-#define ACPI_GPE_RUN_DISABLED (u8) 0x00 /* Default */
-
-#define ACPI_GPE_WAKE_ENABLE_MASK (u8) 0x40
-#define ACPI_GPE_WAKE_ENABLED (u8) 0x40
-#define ACPI_GPE_WAKE_DISABLED (u8) 0x00 /* Default */
-
-#define ACPI_GPE_ENABLE_MASK (u8) 0x60 /* Both run/wake */
-
/*
* Flags for GPE and Lock interfaces
*/
diff --git a/include/crypto/md5.h b/include/crypto/md5.h
new file mode 100644
index 0000000..65f299b
--- /dev/null
+++ b/include/crypto/md5.h
@@ -0,0 +1,17 @@
+#ifndef _CRYPTO_MD5_H
+#define _CRYPTO_MD5_H
+
+#include <linux/types.h>
+
+#define MD5_DIGEST_SIZE 16
+#define MD5_HMAC_BLOCK_SIZE 64
+#define MD5_BLOCK_WORDS 16
+#define MD5_HASH_WORDS 4
+
+struct md5_state {
+ u32 hash[MD5_HASH_WORDS];
+ u32 block[MD5_BLOCK_WORDS];
+ u64 byte_count;
+};
+
+#endif
diff --git a/include/crypto/pcrypt.h b/include/crypto/pcrypt.h
new file mode 100644
index 0000000..d7d8bd8
--- /dev/null
+++ b/include/crypto/pcrypt.h
@@ -0,0 +1,51 @@
+/*
+ * pcrypt - Parallel crypto engine.
+ *
+ * Copyright (C) 2009 secunet Security Networks AG
+ * Copyright (C) 2009 Steffen Klassert <steffen.klassert@secunet.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#ifndef _CRYPTO_PCRYPT_H
+#define _CRYPTO_PCRYPT_H
+
+#include <linux/crypto.h>
+#include <linux/kernel.h>
+#include <linux/padata.h>
+
+struct pcrypt_request {
+ struct padata_priv padata;
+ void *data;
+ void *__ctx[] CRYPTO_MINALIGN_ATTR;
+};
+
+static inline void *pcrypt_request_ctx(struct pcrypt_request *req)
+{
+ return req->__ctx;
+}
+
+static inline
+struct padata_priv *pcrypt_request_padata(struct pcrypt_request *req)
+{
+ return &req->padata;
+}
+
+static inline
+struct pcrypt_request *pcrypt_padata_request(struct padata_priv *padata)
+{
+ return container_of(padata, struct pcrypt_request, padata);
+}
+
+#endif
diff --git a/include/linux/hid.h b/include/linux/hid.h
index 8709365..b1344ec 100644
--- a/include/linux/hid.h
+++ b/include/linux/hid.h
@@ -501,7 +501,7 @@
void (*hiddev_report_event) (struct hid_device *, struct hid_report *);
/* handler for raw output data, used by hidraw */
- int (*hid_output_raw_report) (struct hid_device *, __u8 *, size_t);
+ int (*hid_output_raw_report) (struct hid_device *, __u8 *, size_t, unsigned char);
/* debugging support via debugfs */
unsigned short debug;
@@ -663,7 +663,7 @@
/* Applications from HID Usage Tables 4/8/99 Version 1.1 */
/* We ignore a few input applications that are not widely used */
-#define IS_INPUT_APPLICATION(a) (((a >= 0x00010000) && (a <= 0x00010008)) || (a == 0x00010080) || (a == 0x000c0001) || (a == 0x000d0002))
+#define IS_INPUT_APPLICATION(a) (((a >= 0x00010000) && (a <= 0x00010008)) || (a == 0x00010080) || (a == 0x000c0001) || ((a >= 0x000d0002) && (a <= 0x000d0006)))
/* HID core API */
@@ -690,6 +690,7 @@
int hidinput_find_field(struct hid_device *hid, unsigned int type, unsigned int code, struct hid_field **field);
void hid_output_report(struct hid_report *report, __u8 *data);
struct hid_device *hid_allocate_device(void);
+struct hid_report *hid_register_report(struct hid_device *device, unsigned type, unsigned id);
int hid_parse_report(struct hid_device *hid, __u8 *start, unsigned size);
int hid_check_keys_pressed(struct hid_device *hid);
int hid_connect(struct hid_device *hid, unsigned int connect_mask);
diff --git a/include/linux/highmem.h b/include/linux/highmem.h
index ab2cc20..74152c0 100644
--- a/include/linux/highmem.h
+++ b/include/linux/highmem.h
@@ -17,6 +17,12 @@
static inline void flush_kernel_dcache_page(struct page *page)
{
}
+static inline void flush_kernel_vmap_range(void *vaddr, int size)
+{
+}
+static inline void invalidate_kernel_vmap_range(void *vaddr, int size)
+{
+}
#endif
#include <asm/kmap_types.h>
diff --git a/include/linux/input.h b/include/linux/input.h
index 663208a..f44ee91 100644
--- a/include/linux/input.h
+++ b/include/linux/input.h
@@ -598,6 +598,48 @@
#define KEY_CAMERA_FOCUS 0x210
+#define BTN_TRIGGER_HAPPY 0x2c0
+#define BTN_TRIGGER_HAPPY1 0x2c0
+#define BTN_TRIGGER_HAPPY2 0x2c1
+#define BTN_TRIGGER_HAPPY3 0x2c2
+#define BTN_TRIGGER_HAPPY4 0x2c3
+#define BTN_TRIGGER_HAPPY5 0x2c4
+#define BTN_TRIGGER_HAPPY6 0x2c5
+#define BTN_TRIGGER_HAPPY7 0x2c6
+#define BTN_TRIGGER_HAPPY8 0x2c7
+#define BTN_TRIGGER_HAPPY9 0x2c8
+#define BTN_TRIGGER_HAPPY10 0x2c9
+#define BTN_TRIGGER_HAPPY11 0x2ca
+#define BTN_TRIGGER_HAPPY12 0x2cb
+#define BTN_TRIGGER_HAPPY13 0x2cc
+#define BTN_TRIGGER_HAPPY14 0x2cd
+#define BTN_TRIGGER_HAPPY15 0x2ce
+#define BTN_TRIGGER_HAPPY16 0x2cf
+#define BTN_TRIGGER_HAPPY17 0x2d0
+#define BTN_TRIGGER_HAPPY18 0x2d1
+#define BTN_TRIGGER_HAPPY19 0x2d2
+#define BTN_TRIGGER_HAPPY20 0x2d3
+#define BTN_TRIGGER_HAPPY21 0x2d4
+#define BTN_TRIGGER_HAPPY22 0x2d5
+#define BTN_TRIGGER_HAPPY23 0x2d6
+#define BTN_TRIGGER_HAPPY24 0x2d7
+#define BTN_TRIGGER_HAPPY25 0x2d8
+#define BTN_TRIGGER_HAPPY26 0x2d9
+#define BTN_TRIGGER_HAPPY27 0x2da
+#define BTN_TRIGGER_HAPPY28 0x2db
+#define BTN_TRIGGER_HAPPY29 0x2dc
+#define BTN_TRIGGER_HAPPY30 0x2dd
+#define BTN_TRIGGER_HAPPY31 0x2de
+#define BTN_TRIGGER_HAPPY32 0x2df
+#define BTN_TRIGGER_HAPPY33 0x2e0
+#define BTN_TRIGGER_HAPPY34 0x2e1
+#define BTN_TRIGGER_HAPPY35 0x2e2
+#define BTN_TRIGGER_HAPPY36 0x2e3
+#define BTN_TRIGGER_HAPPY37 0x2e4
+#define BTN_TRIGGER_HAPPY38 0x2e5
+#define BTN_TRIGGER_HAPPY39 0x2e6
+#define BTN_TRIGGER_HAPPY40 0x2e7
+
/* We avoid low common keys in module aliases so they don't get huge. */
#define KEY_MIN_INTERESTING KEY_MUTE
#define KEY_MAX 0x2ff
diff --git a/include/linux/ioport.h b/include/linux/ioport.h
index 7129504..dda9841 100644
--- a/include/linux/ioport.h
+++ b/include/linux/ioport.h
@@ -112,6 +112,7 @@
extern int request_resource(struct resource *root, struct resource *new);
extern int release_resource(struct resource *new);
+void release_child_resources(struct resource *new);
extern void reserve_region_with_split(struct resource *root,
resource_size_t start, resource_size_t end,
const char *name);
@@ -120,8 +121,10 @@
extern int allocate_resource(struct resource *root, struct resource *new,
resource_size_t size, resource_size_t min,
resource_size_t max, resource_size_t align,
- void (*alignf)(void *, struct resource *,
- resource_size_t, resource_size_t),
+ resource_size_t (*alignf)(void *,
+ const struct resource *,
+ resource_size_t,
+ resource_size_t),
void *alignf_data);
int adjust_resource(struct resource *res, resource_size_t start,
resource_size_t size);
diff --git a/include/linux/mtd/sh_flctl.h b/include/linux/mtd/sh_flctl.h
index e77c1ce..ab77609 100644
--- a/include/linux/mtd/sh_flctl.h
+++ b/include/linux/mtd/sh_flctl.h
@@ -51,6 +51,8 @@
#define _4ECCCNTEN (0x1 << 24)
#define _4ECCEN (0x1 << 23)
#define _4ECCCORRECT (0x1 << 22)
+#define SHBUSSEL (0x1 << 20)
+#define SEL_16BIT (0x1 << 19)
#define SNAND_E (0x1 << 18) /* SNAND (0=512 1=2048)*/
#define QTSEL_E (0x1 << 17)
#define ENDIAN (0x1 << 16) /* 1 = little endian */
@@ -96,6 +98,7 @@
struct sh_flctl {
struct mtd_info mtd;
struct nand_chip chip;
+ struct platform_device *pdev;
void __iomem *reg;
uint8_t done_buff[2048 + 64]; /* max size 2048 + 64 */
diff --git a/include/linux/of.h b/include/linux/of.h
index e7facd8..f6d9cbc 100644
--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -19,6 +19,11 @@
#include <linux/bitops.h>
#include <linux/kref.h>
#include <linux/mod_devicetable.h>
+#include <linux/spinlock.h>
+
+#include <asm/byteorder.h>
+
+#ifdef CONFIG_OF
typedef u32 phandle;
typedef u32 ihandle;
@@ -39,10 +44,7 @@
struct device_node {
const char *name;
const char *type;
- phandle node;
-#if !defined(CONFIG_SPARC)
- phandle linux_phandle;
-#endif
+ phandle phandle;
char *full_name;
struct property *properties;
@@ -63,6 +65,11 @@
#endif
};
+/* Pointer for first entry in chain of all nodes. */
+extern struct device_node *allnodes;
+extern struct device_node *of_chosen;
+extern rwlock_t devtree_lock;
+
static inline int of_node_check_flag(struct device_node *n, unsigned long flag)
{
return test_bit(flag, &n->_flags);
@@ -73,12 +80,6 @@
set_bit(flag, &n->_flags);
}
-static inline void
-set_node_proc_entry(struct device_node *dn, struct proc_dir_entry *de)
-{
- dn->pde = de;
-}
-
extern struct device_node *of_find_all_nodes(struct device_node *prev);
#if defined(CONFIG_SPARC)
@@ -101,26 +102,36 @@
*/
/* Helper to read a big number; size is in cells (not bytes) */
-static inline u64 of_read_number(const u32 *cell, int size)
+static inline u64 of_read_number(const __be32 *cell, int size)
{
u64 r = 0;
while (size--)
- r = (r << 32) | *(cell++);
+ r = (r << 32) | be32_to_cpu(*(cell++));
return r;
}
/* Like of_read_number, but we want an unsigned long result */
-#ifdef CONFIG_PPC32
-static inline unsigned long of_read_ulong(const u32 *cell, int size)
+static inline unsigned long of_read_ulong(const __be32 *cell, int size)
{
- return cell[size-1];
+ /* toss away upper bits if unsigned long is smaller than u64 */
+ return of_read_number(cell, size);
}
-#else
-#define of_read_ulong(cell, size) of_read_number(cell, size)
-#endif
#include <asm/prom.h>
+/* Default #address and #size cells. Allow arch asm/prom.h to override */
+#if !defined(OF_ROOT_NODE_ADDR_CELLS_DEFAULT)
+#define OF_ROOT_NODE_ADDR_CELLS_DEFAULT 1
+#define OF_ROOT_NODE_SIZE_CELLS_DEFAULT 1
+#endif
+
+/* Default string compare functions, Allow arch asm/prom.h to override */
+#if !defined(of_compat_cmp)
+#define of_compat_cmp(s1, s2, l) strncasecmp((s1), (s2), (l))
+#define of_prop_cmp(s1, s2) strcmp((s1), (s2))
+#define of_node_cmp(s1, s2) strcasecmp((s1), (s2))
+#endif
+
/* flag descriptions */
#define OF_DYNAMIC 1 /* node and properties were allocated via kmalloc */
#define OF_DETACHED 2 /* node has been detached from the device tree */
@@ -187,4 +198,19 @@
const char *list_name, const char *cells_name, int index,
struct device_node **out_node, const void **out_args);
+extern int of_machine_is_compatible(const char *compat);
+
+extern int prom_add_property(struct device_node* np, struct property* prop);
+extern int prom_remove_property(struct device_node *np, struct property *prop);
+extern int prom_update_property(struct device_node *np,
+ struct property *newprop,
+ struct property *oldprop);
+
+#if defined(CONFIG_OF_DYNAMIC)
+/* For updating the device tree at runtime */
+extern void of_attach_node(struct device_node *);
+extern void of_detach_node(struct device_node *);
+#endif
+
+#endif /* CONFIG_OF */
#endif /* _LINUX_OF_H */
diff --git a/include/linux/of_fdt.h b/include/linux/of_fdt.h
index 41d432b..a1ca92c 100644
--- a/include/linux/of_fdt.h
+++ b/include/linux/of_fdt.h
@@ -42,45 +42,62 @@
* ends when size is 0
*/
struct boot_param_header {
- u32 magic; /* magic word OF_DT_HEADER */
- u32 totalsize; /* total size of DT block */
- u32 off_dt_struct; /* offset to structure */
- u32 off_dt_strings; /* offset to strings */
- u32 off_mem_rsvmap; /* offset to memory reserve map */
- u32 version; /* format version */
- u32 last_comp_version; /* last compatible version */
+ __be32 magic; /* magic word OF_DT_HEADER */
+ __be32 totalsize; /* total size of DT block */
+ __be32 off_dt_struct; /* offset to structure */
+ __be32 off_dt_strings; /* offset to strings */
+ __be32 off_mem_rsvmap; /* offset to memory reserve map */
+ __be32 version; /* format version */
+ __be32 last_comp_version; /* last compatible version */
/* version 2 fields below */
- u32 boot_cpuid_phys; /* Physical CPU id we're booting on */
+ __be32 boot_cpuid_phys; /* Physical CPU id we're booting on */
/* version 3 fields below */
- u32 dt_strings_size; /* size of the DT strings block */
+ __be32 dt_strings_size; /* size of the DT strings block */
/* version 17 fields below */
- u32 dt_struct_size; /* size of the DT structure block */
+ __be32 dt_struct_size; /* size of the DT structure block */
};
+/* TBD: Temporary export of fdt globals - remove when code fully merged */
+extern int __initdata dt_root_addr_cells;
+extern int __initdata dt_root_size_cells;
+extern struct boot_param_header *initial_boot_params;
+
/* For scanning the flat device-tree at boot time */
-extern int __init of_scan_flat_dt(int (*it)(unsigned long node,
- const char *uname, int depth,
- void *data),
- void *data);
-extern void __init *of_get_flat_dt_prop(unsigned long node, const char *name,
- unsigned long *size);
-extern int __init of_flat_dt_is_compatible(unsigned long node,
- const char *name);
-extern unsigned long __init of_get_flat_dt_root(void);
+extern char *find_flat_dt_string(u32 offset);
+extern int of_scan_flat_dt(int (*it)(unsigned long node, const char *uname,
+ int depth, void *data),
+ void *data);
+extern void *of_get_flat_dt_prop(unsigned long node, const char *name,
+ unsigned long *size);
+extern int of_flat_dt_is_compatible(unsigned long node, const char *name);
+extern unsigned long of_get_flat_dt_root(void);
+extern void early_init_dt_scan_chosen_arch(unsigned long node);
+extern int early_init_dt_scan_chosen(unsigned long node, const char *uname,
+ int depth, void *data);
+extern void early_init_dt_check_for_initrd(unsigned long node);
+extern int early_init_dt_scan_memory(unsigned long node, const char *uname,
+ int depth, void *data);
+extern void early_init_dt_add_memory_arch(u64 base, u64 size);
+extern u64 early_init_dt_alloc_memory_arch(u64 size, u64 align);
+extern u64 dt_mem_next_cell(int s, __be32 **cellp);
+
+/*
+ * If BLK_DEV_INITRD, the fdt early init code will call this function,
+ * to be provided by the arch code. start and end are specified as
+ * physical addresses.
+ */
+#ifdef CONFIG_BLK_DEV_INITRD
+extern void early_init_dt_setup_initrd_arch(unsigned long start,
+ unsigned long end);
+#endif
+
+/* Early flat tree scan hooks */
+extern int early_init_dt_scan_root(unsigned long node, const char *uname,
+ int depth, void *data);
/* Other Prototypes */
-extern void finish_device_tree(void);
extern void unflatten_device_tree(void);
extern void early_init_devtree(void *);
-extern int machine_is_compatible(const char *compat);
-extern void print_properties(struct device_node *node);
-extern int prom_n_intr_cells(struct device_node* np);
-extern void prom_get_irq_senses(unsigned char *senses, int off, int max);
-extern int prom_add_property(struct device_node* np, struct property* prop);
-extern int prom_remove_property(struct device_node *np, struct property *prop);
-extern int prom_update_property(struct device_node *np,
- struct property *newprop,
- struct property *oldprop);
#endif /* __ASSEMBLY__ */
#endif /* _LINUX_OF_FDT_H */
diff --git a/include/linux/padata.h b/include/linux/padata.h
new file mode 100644
index 0000000..51611da
--- /dev/null
+++ b/include/linux/padata.h
@@ -0,0 +1,88 @@
+/*
+ * padata.h - header for the padata parallelization interface
+ *
+ * Copyright (C) 2008, 2009 secunet Security Networks AG
+ * Copyright (C) 2008, 2009 Steffen Klassert <steffen.klassert@secunet.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#ifndef PADATA_H
+#define PADATA_H
+
+#include <linux/workqueue.h>
+#include <linux/spinlock.h>
+#include <linux/list.h>
+
+struct padata_priv {
+ struct list_head list;
+ struct parallel_data *pd;
+ int cb_cpu;
+ int seq_nr;
+ int info;
+ void (*parallel)(struct padata_priv *padata);
+ void (*serial)(struct padata_priv *padata);
+};
+
+struct padata_list {
+ struct list_head list;
+ spinlock_t lock;
+};
+
+struct padata_queue {
+ struct padata_list parallel;
+ struct padata_list reorder;
+ struct padata_list serial;
+ struct work_struct pwork;
+ struct work_struct swork;
+ struct parallel_data *pd;
+ atomic_t num_obj;
+ int cpu_index;
+};
+
+struct parallel_data {
+ struct padata_instance *pinst;
+ struct padata_queue *queue;
+ atomic_t seq_nr;
+ atomic_t reorder_objects;
+ atomic_t refcnt;
+ unsigned int max_seq_nr;
+ cpumask_var_t cpumask;
+ spinlock_t lock;
+};
+
+struct padata_instance {
+ struct notifier_block cpu_notifier;
+ struct workqueue_struct *wq;
+ struct parallel_data *pd;
+ cpumask_var_t cpumask;
+ struct mutex lock;
+ u8 flags;
+#define PADATA_INIT 1
+#define PADATA_RESET 2
+};
+
+extern struct padata_instance *padata_alloc(const struct cpumask *cpumask,
+ struct workqueue_struct *wq);
+extern void padata_free(struct padata_instance *pinst);
+extern int padata_do_parallel(struct padata_instance *pinst,
+ struct padata_priv *padata, int cb_cpu);
+extern void padata_do_serial(struct padata_priv *padata);
+extern int padata_set_cpumask(struct padata_instance *pinst,
+ cpumask_var_t cpumask);
+extern int padata_add_cpu(struct padata_instance *pinst, int cpu);
+extern int padata_remove_cpu(struct padata_instance *pinst, int cpu);
+extern void padata_start(struct padata_instance *pinst);
+extern void padata_stop(struct padata_instance *pinst);
+#endif
diff --git a/include/linux/pci-acpi.h b/include/linux/pci-acpi.h
index 93a7c08f..c8b6473 100644
--- a/include/linux/pci-acpi.h
+++ b/include/linux/pci-acpi.h
@@ -11,6 +11,13 @@
#include <linux/acpi.h>
#ifdef CONFIG_ACPI
+extern acpi_status pci_acpi_add_bus_pm_notifier(struct acpi_device *dev,
+ struct pci_bus *pci_bus);
+extern acpi_status pci_acpi_remove_bus_pm_notifier(struct acpi_device *dev);
+extern acpi_status pci_acpi_add_pm_notifier(struct acpi_device *dev,
+ struct pci_dev *pci_dev);
+extern acpi_status pci_acpi_remove_pm_notifier(struct acpi_device *dev);
+
static inline acpi_handle acpi_find_root_bridge_handle(struct pci_dev *pdev)
{
struct pci_bus *pbus = pdev->bus;
diff --git a/include/linux/pci.h b/include/linux/pci.h
index c1968f4..e19a696 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -187,6 +187,33 @@
PCI_BUS_FLAGS_NO_MMRBC = (__force pci_bus_flags_t) 2,
};
+/* Based on the PCI Hotplug Spec, but some values are made up by us */
+enum pci_bus_speed {
+ PCI_SPEED_33MHz = 0x00,
+ PCI_SPEED_66MHz = 0x01,
+ PCI_SPEED_66MHz_PCIX = 0x02,
+ PCI_SPEED_100MHz_PCIX = 0x03,
+ PCI_SPEED_133MHz_PCIX = 0x04,
+ PCI_SPEED_66MHz_PCIX_ECC = 0x05,
+ PCI_SPEED_100MHz_PCIX_ECC = 0x06,
+ PCI_SPEED_133MHz_PCIX_ECC = 0x07,
+ PCI_SPEED_66MHz_PCIX_266 = 0x09,
+ PCI_SPEED_100MHz_PCIX_266 = 0x0a,
+ PCI_SPEED_133MHz_PCIX_266 = 0x0b,
+ AGP_UNKNOWN = 0x0c,
+ AGP_1X = 0x0d,
+ AGP_2X = 0x0e,
+ AGP_4X = 0x0f,
+ AGP_8X = 0x10,
+ PCI_SPEED_66MHz_PCIX_533 = 0x11,
+ PCI_SPEED_100MHz_PCIX_533 = 0x12,
+ PCI_SPEED_133MHz_PCIX_533 = 0x13,
+ PCIE_SPEED_2_5GT = 0x14,
+ PCIE_SPEED_5_0GT = 0x15,
+ PCIE_SPEED_8_0GT = 0x16,
+ PCI_SPEED_UNKNOWN = 0xff,
+};
+
struct pci_cap_saved_state {
struct hlist_node next;
char cap_nr;
@@ -239,6 +266,7 @@
configuration space */
unsigned int pme_support:5; /* Bitmask of states from which PME#
can be generated */
+ unsigned int pme_interrupt:1;
unsigned int d1_support:1; /* Low power state D1 is supported */
unsigned int d2_support:1; /* Low power state D2 is supported */
unsigned int no_d1d2:1; /* Only allow D0 and D3 */
@@ -275,7 +303,8 @@
unsigned int msix_enabled:1;
unsigned int ari_enabled:1; /* ARI forwarding */
unsigned int is_managed:1;
- unsigned int is_pcie:1;
+ unsigned int is_pcie:1; /* Obsolete. Will be removed.
+ Use pci_is_pcie() instead */
unsigned int needs_freset:1; /* Dev requires fundamental reset */
unsigned int state_saved:1;
unsigned int is_physfn:1;
@@ -335,9 +364,26 @@
hlist_add_head(&new_cap->next, &pci_dev->saved_cap_space);
}
-#ifndef PCI_BUS_NUM_RESOURCES
-#define PCI_BUS_NUM_RESOURCES 16
-#endif
+/*
+ * The first PCI_BRIDGE_RESOURCE_NUM PCI bus resources (those that correspond
+ * to P2P or CardBus bridge windows) go in a table. Additional ones (for
+ * buses below host bridges or subtractive decode bridges) go in the list.
+ * Use pci_bus_for_each_resource() to iterate through all the resources.
+ */
+
+/*
+ * PCI_SUBTRACTIVE_DECODE means the bridge forwards the window implicitly
+ * and there's no way to program the bridge with the details of the window.
+ * This does not apply to ACPI _CRS windows, even with the _DEC subtractive-
+ * decode bit set, because they are explicit and can be programmed with _SRS.
+ */
+#define PCI_SUBTRACTIVE_DECODE 0x1
+
+struct pci_bus_resource {
+ struct list_head list;
+ struct resource *res;
+ unsigned int flags;
+};
#define PCI_REGION_FLAG_MASK 0x0fU /* These bits of resource flags tell us the PCI region flags */
@@ -348,8 +394,8 @@
struct list_head devices; /* list of devices on this bus */
struct pci_dev *self; /* bridge device as seen by parent */
struct list_head slots; /* list of slots on this bus */
- struct resource *resource[PCI_BUS_NUM_RESOURCES];
- /* address space routed to this bus */
+ struct resource *resource[PCI_BRIDGE_RESOURCE_NUM];
+ struct list_head resources; /* address space routed to this bus */
struct pci_ops *ops; /* configuration access functions */
void *sysdata; /* hook for sys-specific extension */
@@ -359,6 +405,8 @@
unsigned char primary; /* number of primary bridge */
unsigned char secondary; /* number of secondary bridge */
unsigned char subordinate; /* max number of subordinate buses */
+ unsigned char max_bus_speed; /* enum pci_bus_speed */
+ unsigned char cur_bus_speed; /* enum pci_bus_speed */
char name[48];
@@ -563,7 +611,8 @@
char *pcibios_setup(char *str);
/* Used only when drivers/pci/setup.c is used */
-void pcibios_align_resource(void *, struct resource *, resource_size_t,
+resource_size_t pcibios_align_resource(void *, const struct resource *,
+ resource_size_t,
resource_size_t);
void pcibios_update_irq(struct pci_dev *, int irq);
@@ -589,6 +638,7 @@
struct pci_ops *ops, void *sysdata);
struct pci_bus *pci_add_new_bus(struct pci_bus *parent, struct pci_dev *dev,
int busnr);
+void pcie_update_link_speed(struct pci_bus *bus, u16 link_status);
struct pci_slot *pci_create_slot(struct pci_bus *parent, int slot_nr,
const char *name,
struct hotplug_slot *hotplug);
@@ -615,12 +665,6 @@
/* Generic PCI functions exported to card drivers */
-#ifdef CONFIG_PCI_LEGACY
-struct pci_dev __deprecated *pci_find_device(unsigned int vendor,
- unsigned int device,
- struct pci_dev *from);
-#endif /* CONFIG_PCI_LEGACY */
-
enum pci_lost_interrupt_reason {
PCI_LOST_IRQ_NO_INFORMATION = 0,
PCI_LOST_IRQ_DISABLE_MSI,
@@ -750,11 +794,19 @@
pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state);
bool pci_pme_capable(struct pci_dev *dev, pci_power_t state);
void pci_pme_active(struct pci_dev *dev, bool enable);
-int pci_enable_wake(struct pci_dev *dev, pci_power_t state, bool enable);
+int __pci_enable_wake(struct pci_dev *dev, pci_power_t state,
+ bool runtime, bool enable);
int pci_wake_from_d3(struct pci_dev *dev, bool enable);
pci_power_t pci_target_state(struct pci_dev *dev);
int pci_prepare_to_sleep(struct pci_dev *dev);
int pci_back_from_sleep(struct pci_dev *dev);
+bool pci_dev_run_wake(struct pci_dev *dev);
+
+static inline int pci_enable_wake(struct pci_dev *dev, pci_power_t state,
+ bool enable)
+{
+ return __pci_enable_wake(dev, state, false, enable);
+}
/* For use by arch with custom probe code */
void set_pcie_port_type(struct pci_dev *pdev);
@@ -776,6 +828,7 @@
void pci_bus_size_bridges(struct pci_bus *bus);
int pci_claim_resource(struct pci_dev *, int);
void pci_assign_unassigned_resources(void);
+void pci_assign_unassigned_bridge_resources(struct pci_dev *bridge);
void pdev_enable_device(struct pci_dev *);
void pdev_sort_resources(struct pci_dev *, struct resource_list *);
int pci_enable_resources(struct pci_dev *, int mask);
@@ -793,12 +846,23 @@
void pci_release_selected_regions(struct pci_dev *, int);
/* drivers/pci/bus.c */
+void pci_bus_add_resource(struct pci_bus *bus, struct resource *res, unsigned int flags);
+struct resource *pci_bus_resource_n(const struct pci_bus *bus, int n);
+void pci_bus_remove_resources(struct pci_bus *bus);
+
+#define pci_bus_for_each_resource(bus, res, i) \
+ for (i = 0; \
+ (res = pci_bus_resource_n(bus, i)) || i < PCI_BRIDGE_RESOURCE_NUM; \
+ i++)
+
int __must_check pci_bus_alloc_resource(struct pci_bus *bus,
struct resource *res, resource_size_t size,
resource_size_t align, resource_size_t min,
unsigned int type_mask,
- void (*alignf)(void *, struct resource *,
- resource_size_t, resource_size_t),
+ resource_size_t (*alignf)(void *,
+ const struct resource *,
+ resource_size_t,
+ resource_size_t),
void *alignf_data);
void pci_enable_bridges(struct pci_bus *bus);
@@ -977,13 +1041,6 @@
_PCI_NOP_ALL(read, *)
_PCI_NOP_ALL(write,)
-static inline struct pci_dev *pci_find_device(unsigned int vendor,
- unsigned int device,
- struct pci_dev *from)
-{
- return NULL;
-}
-
static inline struct pci_dev *pci_get_device(unsigned int vendor,
unsigned int device,
struct pci_dev *from)
@@ -1241,8 +1298,12 @@
DECLARE_PCI_FIXUP_SECTION(.pci_fixup_suspend, \
suspend##vendor##device##hook, vendor, device, hook)
-
+#ifdef CONFIG_PCI_QUIRKS
void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev);
+#else
+static inline void pci_fixup_device(enum pci_fixup_pass pass,
+ struct pci_dev *dev) {}
+#endif
void __iomem *pcim_iomap(struct pci_dev *pdev, int bar, unsigned long maxlen);
void pcim_iounmap(struct pci_dev *pdev, void __iomem *addr);
diff --git a/include/linux/pci_hotplug.h b/include/linux/pci_hotplug.h
index 652ba797..5d09cba 100644
--- a/include/linux/pci_hotplug.h
+++ b/include/linux/pci_hotplug.h
@@ -28,26 +28,6 @@
#ifndef _PCI_HOTPLUG_H
#define _PCI_HOTPLUG_H
-
-/* These values come from the PCI Hotplug Spec */
-enum pci_bus_speed {
- PCI_SPEED_33MHz = 0x00,
- PCI_SPEED_66MHz = 0x01,
- PCI_SPEED_66MHz_PCIX = 0x02,
- PCI_SPEED_100MHz_PCIX = 0x03,
- PCI_SPEED_133MHz_PCIX = 0x04,
- PCI_SPEED_66MHz_PCIX_ECC = 0x05,
- PCI_SPEED_100MHz_PCIX_ECC = 0x06,
- PCI_SPEED_133MHz_PCIX_ECC = 0x07,
- PCI_SPEED_66MHz_PCIX_266 = 0x09,
- PCI_SPEED_100MHz_PCIX_266 = 0x0a,
- PCI_SPEED_133MHz_PCIX_266 = 0x0b,
- PCI_SPEED_66MHz_PCIX_533 = 0x11,
- PCI_SPEED_100MHz_PCIX_533 = 0x12,
- PCI_SPEED_133MHz_PCIX_533 = 0x13,
- PCI_SPEED_UNKNOWN = 0xff,
-};
-
/* These values come from the PCI Express Spec */
enum pcie_link_width {
PCIE_LNK_WIDTH_RESRV = 0x00,
@@ -61,12 +41,6 @@
PCIE_LNK_WIDTH_UNKNOWN = 0xFF,
};
-enum pcie_link_speed {
- PCIE_2_5GB = 0x14,
- PCIE_5_0GB = 0x15,
- PCIE_LNK_SPEED_UNKNOWN = 0xFF,
-};
-
/**
* struct hotplug_slot_ops -the callbacks that the hotplug pci core can use
* @owner: The module owner of this structure
@@ -89,12 +63,6 @@
* @get_adapter_status: Called to get see if an adapter is present in the slot or not.
* If this field is NULL, the value passed in the struct hotplug_slot_info
* will be used when this value is requested by a user.
- * @get_max_bus_speed: Called to get the max bus speed for a slot.
- * If this field is NULL, the value passed in the struct hotplug_slot_info
- * will be used when this value is requested by a user.
- * @get_cur_bus_speed: Called to get the current bus speed for a slot.
- * If this field is NULL, the value passed in the struct hotplug_slot_info
- * will be used when this value is requested by a user.
*
* The table of function pointers that is passed to the hotplug pci core by a
* hotplug pci driver. These functions are called by the hotplug pci core when
@@ -112,17 +80,14 @@
int (*get_attention_status) (struct hotplug_slot *slot, u8 *value);
int (*get_latch_status) (struct hotplug_slot *slot, u8 *value);
int (*get_adapter_status) (struct hotplug_slot *slot, u8 *value);
- int (*get_max_bus_speed) (struct hotplug_slot *slot, enum pci_bus_speed *value);
- int (*get_cur_bus_speed) (struct hotplug_slot *slot, enum pci_bus_speed *value);
};
/**
* struct hotplug_slot_info - used to notify the hotplug pci core of the state of the slot
- * @power: if power is enabled or not (1/0)
+ * @power_status: if power is enabled or not (1/0)
* @attention_status: if the attention light is enabled or not (1/0)
* @latch_status: if the latch (if any) is open or closed (1/0)
- * @adapter_present: if there is a pci board present in the slot or not (1/0)
- * @address: (domain << 16 | bus << 8 | dev)
+ * @adapter_status: if there is a pci board present in the slot or not (1/0)
*
* Used to notify the hotplug pci core of the status of a specific slot.
*/
@@ -131,8 +96,6 @@
u8 attention_status;
u8 latch_status;
u8 adapter_status;
- enum pci_bus_speed max_bus_speed;
- enum pci_bus_speed cur_bus_speed;
};
/**
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index cca8a04..0be8243 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2417,6 +2417,9 @@
#define PCI_DEVICE_ID_INTEL_82840_HB 0x1a21
#define PCI_DEVICE_ID_INTEL_82845_HB 0x1a30
#define PCI_DEVICE_ID_INTEL_IOAT 0x1a38
+#define PCI_DEVICE_ID_INTEL_CPT_SMBUS 0x1c22
+#define PCI_DEVICE_ID_INTEL_CPT_LPC1 0x1c42
+#define PCI_DEVICE_ID_INTEL_CPT_LPC2 0x1c43
#define PCI_DEVICE_ID_INTEL_82801AA_0 0x2410
#define PCI_DEVICE_ID_INTEL_82801AA_1 0x2411
#define PCI_DEVICE_ID_INTEL_82801AA_3 0x2413
diff --git a/include/linux/pfkeyv2.h b/include/linux/pfkeyv2.h
index 228b0b6..0b80c80 100644
--- a/include/linux/pfkeyv2.h
+++ b/include/linux/pfkeyv2.h
@@ -315,6 +315,7 @@
#define SADB_X_EALG_AES_GCM_ICV12 19
#define SADB_X_EALG_AES_GCM_ICV16 20
#define SADB_X_EALG_CAMELLIACBC 22
+#define SADB_X_EALG_NULL_AES_GMAC 23
#define SADB_EALG_MAX 253 /* last EALG */
/* private allocations should use 249-255 (RFC2407) */
#define SADB_X_EALG_SERPENTCBC 252 /* draft-ietf-ipsec-ciph-aes-cbc-00 */
diff --git a/include/linux/raid_class.h b/include/linux/raid_class.h
index 6b537f1..31e1ff6 100644
--- a/include/linux/raid_class.h
+++ b/include/linux/raid_class.h
@@ -32,6 +32,7 @@
RAID_LEVEL_0,
RAID_LEVEL_1,
RAID_LEVEL_10,
+ RAID_LEVEL_1E,
RAID_LEVEL_3,
RAID_LEVEL_4,
RAID_LEVEL_5,
diff --git a/include/linux/sh_intc.h b/include/linux/sh_intc.h
index 4ef246f..51d288d 100644
--- a/include/linux/sh_intc.h
+++ b/include/linux/sh_intc.h
@@ -45,7 +45,7 @@
#define INTC_SMP(stride, nr)
#endif
-struct intc_desc {
+struct intc_hw_desc {
struct intc_vect *vectors;
unsigned int nr_vectors;
struct intc_group *groups;
@@ -56,29 +56,40 @@
unsigned int nr_prio_regs;
struct intc_sense_reg *sense_regs;
unsigned int nr_sense_regs;
- char *name;
struct intc_mask_reg *ack_regs;
unsigned int nr_ack_regs;
};
#define _INTC_ARRAY(a) a, sizeof(a)/sizeof(*a)
+#define INTC_HW_DESC(vectors, groups, mask_regs, \
+ prio_regs, sense_regs, ack_regs) \
+{ \
+ _INTC_ARRAY(vectors), _INTC_ARRAY(groups), \
+ _INTC_ARRAY(mask_regs), _INTC_ARRAY(prio_regs), \
+ _INTC_ARRAY(sense_regs), _INTC_ARRAY(ack_regs), \
+}
+
+struct intc_desc {
+ char *name;
+ intc_enum force_enable;
+ intc_enum force_disable;
+ struct intc_hw_desc hw;
+};
+
#define DECLARE_INTC_DESC(symbol, chipname, vectors, groups, \
mask_regs, prio_regs, sense_regs) \
struct intc_desc symbol __initdata = { \
- _INTC_ARRAY(vectors), _INTC_ARRAY(groups), \
- _INTC_ARRAY(mask_regs), _INTC_ARRAY(prio_regs), \
- _INTC_ARRAY(sense_regs), \
- chipname, \
+ .name = chipname, \
+ .hw = INTC_HW_DESC(vectors, groups, mask_regs, \
+ prio_regs, sense_regs, NULL), \
}
#define DECLARE_INTC_DESC_ACK(symbol, chipname, vectors, groups, \
mask_regs, prio_regs, sense_regs, ack_regs) \
struct intc_desc symbol __initdata = { \
- _INTC_ARRAY(vectors), _INTC_ARRAY(groups), \
- _INTC_ARRAY(mask_regs), _INTC_ARRAY(prio_regs), \
- _INTC_ARRAY(sense_regs), \
- chipname, \
- _INTC_ARRAY(ack_regs), \
+ .name = chipname, \
+ .hw = INTC_HW_DESC(vectors, groups, mask_regs, \
+ prio_regs, sense_regs, ack_regs), \
}
void __init register_intc_controller(struct intc_desc *desc);
diff --git a/include/linux/spi/dw_spi.h b/include/linux/spi/dw_spi.h
index 51b3e77..cc813f9 100644
--- a/include/linux/spi/dw_spi.h
+++ b/include/linux/spi/dw_spi.h
@@ -90,6 +90,7 @@
unsigned long paddr;
u32 iolen;
int irq;
+ u32 fifo_len; /* depth of the FIFO buffer */
u32 max_freq; /* max bus freq supported */
u16 bus_num;
@@ -171,6 +172,10 @@
{
if (cs > dws->num_cs)
return;
+
+ if (dws->cs_control)
+ dws->cs_control(1);
+
dw_writel(dws, ser, 1 << cs);
}
diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h
index d4962a7..3793d16 100644
--- a/include/linux/videodev2.h
+++ b/include/linux/videodev2.h
@@ -350,6 +350,7 @@
#define V4L2_PIX_FMT_MPEG v4l2_fourcc('M', 'P', 'E', 'G') /* MPEG-1/2/4 */
/* Vendor-specific formats */
+#define V4L2_PIX_FMT_CPIA1 v4l2_fourcc('C', 'P', 'I', 'A') /* cpia1 YUV */
#define V4L2_PIX_FMT_WNVA v4l2_fourcc('W', 'N', 'V', 'A') /* Winnov hw compress */
#define V4L2_PIX_FMT_SN9C10X v4l2_fourcc('S', '9', '1', '0') /* SN9C10x compression */
#define V4L2_PIX_FMT_SN9C20X_I420 v4l2_fourcc('S', '9', '2', '0') /* SN9C20x YUV 4:2:0 */
@@ -362,6 +363,7 @@
#define V4L2_PIX_FMT_SPCA561 v4l2_fourcc('S', '5', '6', '1') /* compressed GBRG bayer */
#define V4L2_PIX_FMT_PAC207 v4l2_fourcc('P', '2', '0', '7') /* compressed BGGR bayer */
#define V4L2_PIX_FMT_MR97310A v4l2_fourcc('M', '3', '1', '0') /* compressed BGGR bayer */
+#define V4L2_PIX_FMT_SN9C2028 v4l2_fourcc('S', 'O', 'N', 'X') /* compressed GBRG bayer */
#define V4L2_PIX_FMT_SQ905C v4l2_fourcc('9', '0', '5', 'C') /* compressed RGGB bayer */
#define V4L2_PIX_FMT_PJPG v4l2_fourcc('P', 'J', 'P', 'G') /* Pixart 73xx JPEG */
#define V4L2_PIX_FMT_OV511 v4l2_fourcc('O', '5', '1', '1') /* ov511 JPEG */
diff --git a/include/linux/virtio.h b/include/linux/virtio.h
index 057a2e0..f508c65 100644
--- a/include/linux/virtio.h
+++ b/include/linux/virtio.h
@@ -51,6 +51,9 @@
* This re-enables callbacks; it returns "false" if there are pending
* buffers in the queue, to detect a possible race between the driver
* checking for more work, and enabling callbacks.
+ * @detach_unused_buf: detach first unused buffer
+ * vq: the struct virtqueue we're talking about.
+ * Returns NULL or the "data" token handed to add_buf
*
* Locking rules are straightforward: the driver is responsible for
* locking. No two operations may be invoked simultaneously, with the exception
@@ -71,6 +74,7 @@
void (*disable_cb)(struct virtqueue *vq);
bool (*enable_cb)(struct virtqueue *vq);
+ void *(*detach_unused_buf)(struct virtqueue *vq);
};
/**
diff --git a/include/linux/virtio_balloon.h b/include/linux/virtio_balloon.h
index 1418f04..a50ecd1 100644
--- a/include/linux/virtio_balloon.h
+++ b/include/linux/virtio_balloon.h
@@ -7,6 +7,7 @@
/* The feature bitmap for virtio balloon */
#define VIRTIO_BALLOON_F_MUST_TELL_HOST 0 /* Tell before reclaiming pages */
+#define VIRTIO_BALLOON_F_STATS_VQ 1 /* Memory Stats virtqueue */
/* Size of a PFN in the balloon interface. */
#define VIRTIO_BALLOON_PFN_SHIFT 12
@@ -18,4 +19,18 @@
/* Number of pages we've actually got in balloon. */
__le32 actual;
};
+
+#define VIRTIO_BALLOON_S_SWAP_IN 0 /* Amount of memory swapped in */
+#define VIRTIO_BALLOON_S_SWAP_OUT 1 /* Amount of memory swapped out */
+#define VIRTIO_BALLOON_S_MAJFLT 2 /* Number of major faults */
+#define VIRTIO_BALLOON_S_MINFLT 3 /* Number of minor faults */
+#define VIRTIO_BALLOON_S_MEMFREE 4 /* Total amount of free memory */
+#define VIRTIO_BALLOON_S_MEMTOT 5 /* Total amount of memory */
+#define VIRTIO_BALLOON_S_NR 6
+
+struct virtio_balloon_stat {
+ u16 tag;
+ u64 val;
+} __attribute__((packed));
+
#endif /* _LINUX_VIRTIO_BALLOON_H */
diff --git a/include/linux/virtio_blk.h b/include/linux/virtio_blk.h
index fd294c5..e52029e 100644
--- a/include/linux/virtio_blk.h
+++ b/include/linux/virtio_blk.h
@@ -15,6 +15,7 @@
#define VIRTIO_BLK_F_BLK_SIZE 6 /* Block size of disk is available*/
#define VIRTIO_BLK_F_SCSI 7 /* Supports scsi command passthru */
#define VIRTIO_BLK_F_FLUSH 9 /* Cache flush command support */
+#define VIRTIO_BLK_F_TOPOLOGY 10 /* Topology information is available */
struct virtio_blk_config {
/* The capacity (in 512-byte sectors). */
@@ -29,8 +30,20 @@
__u8 heads;
__u8 sectors;
} geometry;
+
/* block size of device (if VIRTIO_BLK_F_BLK_SIZE) */
__u32 blk_size;
+
+ /* the next 4 entries are guarded by VIRTIO_BLK_F_TOPOLOGY */
+ /* exponent for physical block per logical block. */
+ __u8 physical_block_exp;
+ /* alignment offset in logical blocks. */
+ __u8 alignment_offset;
+ /* minimum I/O size without performance penalty in logical blocks. */
+ __u16 min_io_size;
+ /* optimal sustained I/O size in logical blocks. */
+ __u32 opt_io_size;
+
} __attribute__((packed));
/*
diff --git a/include/linux/virtio_console.h b/include/linux/virtio_console.h
index fe88517..ae4f039 100644
--- a/include/linux/virtio_console.h
+++ b/include/linux/virtio_console.h
@@ -3,19 +3,45 @@
#include <linux/types.h>
#include <linux/virtio_ids.h>
#include <linux/virtio_config.h>
-/* This header, excluding the #ifdef __KERNEL__ part, is BSD licensed so
- * anyone can use the definitions to implement compatible drivers/servers. */
+/*
+ * This header, excluding the #ifdef __KERNEL__ part, is BSD licensed so
+ * anyone can use the definitions to implement compatible drivers/servers.
+ *
+ * Copyright (C) Red Hat, Inc., 2009, 2010
+ */
/* Feature bits */
#define VIRTIO_CONSOLE_F_SIZE 0 /* Does host provide console size? */
+#define VIRTIO_CONSOLE_F_MULTIPORT 1 /* Does host provide multiple ports? */
struct virtio_console_config {
/* colums of the screens */
__u16 cols;
/* rows of the screens */
__u16 rows;
+ /* max. number of ports this device can hold */
+ __u32 max_nr_ports;
+ /* number of ports added so far */
+ __u32 nr_ports;
} __attribute__((packed));
+/*
+ * A message that's passed between the Host and the Guest for a
+ * particular port.
+ */
+struct virtio_console_control {
+ __u32 id; /* Port number */
+ __u16 event; /* The kind of control event (see below) */
+ __u16 value; /* Extra information for the key */
+};
+
+/* Some events for control messages */
+#define VIRTIO_CONSOLE_PORT_READY 0
+#define VIRTIO_CONSOLE_CONSOLE_PORT 1
+#define VIRTIO_CONSOLE_RESIZE 2
+#define VIRTIO_CONSOLE_PORT_OPEN 3
+#define VIRTIO_CONSOLE_PORT_NAME 4
+#define VIRTIO_CONSOLE_PORT_REMOVE 5
#ifdef __KERNEL__
int __init virtio_cons_early_init(int (*put_chars)(u32, const char *, int));
diff --git a/include/media/davinci/isif.h b/include/media/davinci/isif.h
new file mode 100644
index 0000000..b0b74ad
--- /dev/null
+++ b/include/media/davinci/isif.h
@@ -0,0 +1,531 @@
+/*
+ * Copyright (C) 2008-2009 Texas Instruments Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * isif header file
+ */
+#ifndef _ISIF_H
+#define _ISIF_H
+
+#include <media/davinci/ccdc_types.h>
+#include <media/davinci/vpfe_types.h>
+
+/* isif float type S8Q8/U8Q8 */
+struct isif_float_8 {
+ /* 8 bit integer part */
+ __u8 integer;
+ /* 8 bit decimal part */
+ __u8 decimal;
+};
+
+/* isif float type U16Q16/S16Q16 */
+struct isif_float_16 {
+ /* 16 bit integer part */
+ __u16 integer;
+ /* 16 bit decimal part */
+ __u16 decimal;
+};
+
+/************************************************************************
+ * Vertical Defect Correction parameters
+ ***********************************************************************/
+/* Defect Correction (DFC) table entry */
+struct isif_vdfc_entry {
+ /* vertical position of defect */
+ __u16 pos_vert;
+ /* horizontal position of defect */
+ __u16 pos_horz;
+ /*
+ * Defect level of Vertical line defect position. This is subtracted
+ * from the data at the defect position
+ */
+ __u8 level_at_pos;
+ /*
+ * Defect level of the pixels upper than the vertical line defect.
+ * This is subtracted from the data
+ */
+ __u8 level_up_pixels;
+ /*
+ * Defect level of the pixels lower than the vertical line defect.
+ * This is subtracted from the data
+ */
+ __u8 level_low_pixels;
+};
+
+#define ISIF_VDFC_TABLE_SIZE 8
+struct isif_dfc {
+ /* enable vertical defect correction */
+ __u8 en;
+ /* Defect level subtraction. Just fed through if saturating */
+#define ISIF_VDFC_NORMAL 0
+ /*
+ * Defect level subtraction. Horizontal interpolation ((i-2)+(i+2))/2
+ * if data saturating
+ */
+#define ISIF_VDFC_HORZ_INTERPOL_IF_SAT 1
+ /* Horizontal interpolation (((i-2)+(i+2))/2) */
+#define ISIF_VDFC_HORZ_INTERPOL 2
+ /* one of the vertical defect correction modes above */
+ __u8 corr_mode;
+ /* 0 - whole line corrected, 1 - not pixels upper than the defect */
+ __u8 corr_whole_line;
+#define ISIF_VDFC_NO_SHIFT 0
+#define ISIF_VDFC_SHIFT_1 1
+#define ISIF_VDFC_SHIFT_2 2
+#define ISIF_VDFC_SHIFT_3 3
+#define ISIF_VDFC_SHIFT_4 4
+ /*
+ * defect level shift value. level_at_pos, level_upper_pos,
+ * and level_lower_pos can be shifted up by this value. Choose
+ * one of the values above
+ */
+ __u8 def_level_shift;
+ /* defect saturation level */
+ __u16 def_sat_level;
+ /* number of vertical defects. Max is ISIF_VDFC_TABLE_SIZE */
+ __u16 num_vdefects;
+ /* VDFC table ptr */
+ struct isif_vdfc_entry table[ISIF_VDFC_TABLE_SIZE];
+};
+
+struct isif_horz_bclamp {
+
+ /* Horizontal clamp disabled. Only vertical clamp value is subtracted */
+#define ISIF_HORZ_BC_DISABLE 0
+ /*
+ * Horizontal clamp value is calculated and subtracted from image data
+ * along with vertical clamp value
+ */
+#define ISIF_HORZ_BC_CLAMP_CALC_ENABLED 1
+ /*
+ * Horizontal clamp value calculated from previous image is subtracted
+ * from image data along with vertical clamp value.
+ */
+#define ISIF_HORZ_BC_CLAMP_NOT_UPDATED 2
+ /* horizontal clamp mode. One of the values above */
+ __u8 mode;
+ /*
+ * pixel value limit enable.
+ * 0 - limit disabled
+ * 1 - pixel value limited to 1023
+ */
+ __u8 clamp_pix_limit;
+ /* Select Most left window for bc calculation */
+#define ISIF_SEL_MOST_LEFT_WIN 0
+ /* Select Most right window for bc calculation */
+#define ISIF_SEL_MOST_RIGHT_WIN 1
+ /* Select most left or right window for clamp val calculation */
+ __u8 base_win_sel_calc;
+ /* Window count per color for calculation. range 1-32 */
+ __u8 win_count_calc;
+ /* Window start position - horizontal for calculation. 0 - 8191 */
+ __u16 win_start_h_calc;
+ /* Window start position - vertical for calculation 0 - 8191 */
+ __u16 win_start_v_calc;
+#define ISIF_HORZ_BC_SZ_H_2PIXELS 0
+#define ISIF_HORZ_BC_SZ_H_4PIXELS 1
+#define ISIF_HORZ_BC_SZ_H_8PIXELS 2
+#define ISIF_HORZ_BC_SZ_H_16PIXELS 3
+ /* Width of the sample window in pixels for calculation */
+ __u8 win_h_sz_calc;
+#define ISIF_HORZ_BC_SZ_V_32PIXELS 0
+#define ISIF_HORZ_BC_SZ_V_64PIXELS 1
+#define ISIF_HORZ_BC_SZ_V_128PIXELS 2
+#define ISIF_HORZ_BC_SZ_V_256PIXELS 3
+ /* Height of the sample window in pixels for calculation */
+ __u8 win_v_sz_calc;
+};
+
+/************************************************************************
+ * Black Clamp parameters
+ ***********************************************************************/
+struct isif_vert_bclamp {
+ /* Reset value used is the clamp value calculated */
+#define ISIF_VERT_BC_USE_HORZ_CLAMP_VAL 0
+ /* Reset value used is reset_clamp_val configured */
+#define ISIF_VERT_BC_USE_CONFIG_CLAMP_VAL 1
+ /* No update, previous image value is used */
+#define ISIF_VERT_BC_NO_UPDATE 2
+ /*
+ * Reset value selector for vertical clamp calculation. Use one of
+ * the above values
+ */
+ __u8 reset_val_sel;
+ /* U8Q8. Line average coefficient used in vertical clamp calculation */
+ __u8 line_ave_coef;
+ /* Height of the optical black region for calculation */
+ __u16 ob_v_sz_calc;
+ /* Optical black region start position - horizontal. 0 - 8191 */
+ __u16 ob_start_h;
+ /* Optical black region start position - vertical 0 - 8191 */
+ __u16 ob_start_v;
+};
+
+struct isif_black_clamp {
+ /*
+ * This offset value is added irrespective of the clamp enable status.
+ * S13
+ */
+ __u16 dc_offset;
+ /*
+ * Enable black/digital clamp value to be subtracted from the image data
+ */
+ __u8 en;
+ /*
+ * black clamp mode. same/separate clamp for 4 colors
+ * 0 - disable - same clamp value for all colors
+ * 1 - clamp value calculated separately for all colors
+ */
+ __u8 bc_mode_color;
+ /* Vrtical start position for bc subtraction */
+ __u16 vert_start_sub;
+ /* Black clamp for horizontal direction */
+ struct isif_horz_bclamp horz;
+ /* Black clamp for vertical direction */
+ struct isif_vert_bclamp vert;
+};
+
+/*************************************************************************
+** Color Space Convertion (CSC)
+*************************************************************************/
+#define ISIF_CSC_NUM_COEFF 16
+struct isif_color_space_conv {
+ /* Enable color space conversion */
+ __u8 en;
+ /*
+ * csc coeffient table. S8Q5, M00 at index 0, M01 at index 1, and
+ * so forth
+ */
+ struct isif_float_8 coeff[ISIF_CSC_NUM_COEFF];
+};
+
+
+/*************************************************************************
+** Black Compensation parameters
+*************************************************************************/
+struct isif_black_comp {
+ /* Comp for Red */
+ __s8 r_comp;
+ /* Comp for Gr */
+ __s8 gr_comp;
+ /* Comp for Blue */
+ __s8 b_comp;
+ /* Comp for Gb */
+ __s8 gb_comp;
+};
+
+/*************************************************************************
+** Gain parameters
+*************************************************************************/
+struct isif_gain {
+ /* Gain for Red or ye */
+ struct isif_float_16 r_ye;
+ /* Gain for Gr or cy */
+ struct isif_float_16 gr_cy;
+ /* Gain for Gb or g */
+ struct isif_float_16 gb_g;
+ /* Gain for Blue or mg */
+ struct isif_float_16 b_mg;
+};
+
+#define ISIF_LINEAR_TAB_SIZE 192
+/*************************************************************************
+** Linearization parameters
+*************************************************************************/
+struct isif_linearize {
+ /* Enable or Disable linearization of data */
+ __u8 en;
+ /* Shift value applied */
+ __u8 corr_shft;
+ /* scale factor applied U11Q10 */
+ struct isif_float_16 scale_fact;
+ /* Size of the linear table */
+ __u16 table[ISIF_LINEAR_TAB_SIZE];
+};
+
+/* Color patterns */
+#define ISIF_RED 0
+#define ISIF_GREEN_RED 1
+#define ISIF_GREEN_BLUE 2
+#define ISIF_BLUE 3
+struct isif_col_pat {
+ __u8 olop;
+ __u8 olep;
+ __u8 elop;
+ __u8 elep;
+};
+
+/*************************************************************************
+** Data formatter parameters
+*************************************************************************/
+struct isif_fmtplen {
+ /*
+ * number of program entries for SET0, range 1 - 16
+ * when fmtmode is ISIF_SPLIT, 1 - 8 when fmtmode is
+ * ISIF_COMBINE
+ */
+ __u16 plen0;
+ /*
+ * number of program entries for SET1, range 1 - 16
+ * when fmtmode is ISIF_SPLIT, 1 - 8 when fmtmode is
+ * ISIF_COMBINE
+ */
+ __u16 plen1;
+ /**
+ * number of program entries for SET2, range 1 - 16
+ * when fmtmode is ISIF_SPLIT, 1 - 8 when fmtmode is
+ * ISIF_COMBINE
+ */
+ __u16 plen2;
+ /**
+ * number of program entries for SET3, range 1 - 16
+ * when fmtmode is ISIF_SPLIT, 1 - 8 when fmtmode is
+ * ISIF_COMBINE
+ */
+ __u16 plen3;
+};
+
+struct isif_fmt_cfg {
+#define ISIF_SPLIT 0
+#define ISIF_COMBINE 1
+ /* Split or combine or line alternate */
+ __u8 fmtmode;
+ /* enable or disable line alternating mode */
+ __u8 ln_alter_en;
+#define ISIF_1LINE 0
+#define ISIF_2LINES 1
+#define ISIF_3LINES 2
+#define ISIF_4LINES 3
+ /* Split/combine line number */
+ __u8 lnum;
+ /* Address increment Range 1 - 16 */
+ __u8 addrinc;
+};
+
+struct isif_fmt_addr_ptr {
+ /* Initial address */
+ __u32 init_addr;
+ /* output line number */
+#define ISIF_1STLINE 0
+#define ISIF_2NDLINE 1
+#define ISIF_3RDLINE 2
+#define ISIF_4THLINE 3
+ __u8 out_line;
+};
+
+struct isif_fmtpgm_ap {
+ /* program address pointer */
+ __u8 pgm_aptr;
+ /* program address increment or decrement */
+ __u8 pgmupdt;
+};
+
+struct isif_data_formatter {
+ /* Enable/Disable data formatter */
+ __u8 en;
+ /* data formatter configuration */
+ struct isif_fmt_cfg cfg;
+ /* Formatter program entries length */
+ struct isif_fmtplen plen;
+ /* first pixel in a line fed to formatter */
+ __u16 fmtrlen;
+ /* HD interval for output line. Only valid when split line */
+ __u16 fmthcnt;
+ /* formatter address pointers */
+ struct isif_fmt_addr_ptr fmtaddr_ptr[16];
+ /* program enable/disable */
+ __u8 pgm_en[32];
+ /* program address pointers */
+ struct isif_fmtpgm_ap fmtpgm_ap[32];
+};
+
+struct isif_df_csc {
+ /* Color Space Conversion confguration, 0 - csc, 1 - df */
+ __u8 df_or_csc;
+ /* csc configuration valid if df_or_csc is 0 */
+ struct isif_color_space_conv csc;
+ /* data formatter configuration valid if df_or_csc is 1 */
+ struct isif_data_formatter df;
+ /* start pixel in a line at the input */
+ __u32 start_pix;
+ /* number of pixels in input line */
+ __u32 num_pixels;
+ /* start line at the input */
+ __u32 start_line;
+ /* number of lines at the input */
+ __u32 num_lines;
+};
+
+struct isif_gain_offsets_adj {
+ /* Gain adjustment per color */
+ struct isif_gain gain;
+ /* Offset adjustment */
+ __u16 offset;
+ /* Enable or Disable Gain adjustment for SDRAM data */
+ __u8 gain_sdram_en;
+ /* Enable or Disable Gain adjustment for IPIPE data */
+ __u8 gain_ipipe_en;
+ /* Enable or Disable Gain adjustment for H3A data */
+ __u8 gain_h3a_en;
+ /* Enable or Disable Gain adjustment for SDRAM data */
+ __u8 offset_sdram_en;
+ /* Enable or Disable Gain adjustment for IPIPE data */
+ __u8 offset_ipipe_en;
+ /* Enable or Disable Gain adjustment for H3A data */
+ __u8 offset_h3a_en;
+};
+
+struct isif_cul {
+ /* Horizontal Cull pattern for odd lines */
+ __u8 hcpat_odd;
+ /* Horizontal Cull pattern for even lines */
+ __u8 hcpat_even;
+ /* Vertical Cull pattern */
+ __u8 vcpat;
+ /* Enable or disable lpf. Apply when cull is enabled */
+ __u8 en_lpf;
+};
+
+struct isif_compress {
+#define ISIF_ALAW 0
+#define ISIF_DPCM 1
+#define ISIF_NO_COMPRESSION 2
+ /* Compression Algorithm used */
+ __u8 alg;
+ /* Choose Predictor1 for DPCM compression */
+#define ISIF_DPCM_PRED1 0
+ /* Choose Predictor2 for DPCM compression */
+#define ISIF_DPCM_PRED2 1
+ /* Predictor for DPCM compression */
+ __u8 pred;
+};
+
+/* all the stuff in this struct will be provided by userland */
+struct isif_config_params_raw {
+ /* Linearization parameters for image sensor data input */
+ struct isif_linearize linearize;
+ /* Data formatter or CSC */
+ struct isif_df_csc df_csc;
+ /* Defect Pixel Correction (DFC) confguration */
+ struct isif_dfc dfc;
+ /* Black/Digital Clamp configuration */
+ struct isif_black_clamp bclamp;
+ /* Gain, offset adjustments */
+ struct isif_gain_offsets_adj gain_offset;
+ /* Culling */
+ struct isif_cul culling;
+ /* A-Law and DPCM compression options */
+ struct isif_compress compress;
+ /* horizontal offset for Gain/LSC/DFC */
+ __u16 horz_offset;
+ /* vertical offset for Gain/LSC/DFC */
+ __u16 vert_offset;
+ /* color pattern for field 0 */
+ struct isif_col_pat col_pat_field0;
+ /* color pattern for field 1 */
+ struct isif_col_pat col_pat_field1;
+#define ISIF_NO_SHIFT 0
+#define ISIF_1BIT_SHIFT 1
+#define ISIF_2BIT_SHIFT 2
+#define ISIF_3BIT_SHIFT 3
+#define ISIF_4BIT_SHIFT 4
+#define ISIF_5BIT_SHIFT 5
+#define ISIF_6BIT_SHIFT 6
+ /* Data shift applied before storing to SDRAM */
+ __u8 data_shift;
+ /* enable input test pattern generation */
+ __u8 test_pat_gen;
+};
+
+#ifdef __KERNEL__
+struct isif_ycbcr_config {
+ /* isif pixel format */
+ enum ccdc_pixfmt pix_fmt;
+ /* isif frame format */
+ enum ccdc_frmfmt frm_fmt;
+ /* ISIF crop window */
+ struct v4l2_rect win;
+ /* field polarity */
+ enum vpfe_pin_pol fid_pol;
+ /* interface VD polarity */
+ enum vpfe_pin_pol vd_pol;
+ /* interface HD polarity */
+ enum vpfe_pin_pol hd_pol;
+ /* isif pix order. Only used for ycbcr capture */
+ enum ccdc_pixorder pix_order;
+ /* isif buffer type. Only used for ycbcr capture */
+ enum ccdc_buftype buf_type;
+};
+
+/* MSB of image data connected to sensor port */
+enum isif_data_msb {
+ ISIF_BIT_MSB_15,
+ ISIF_BIT_MSB_14,
+ ISIF_BIT_MSB_13,
+ ISIF_BIT_MSB_12,
+ ISIF_BIT_MSB_11,
+ ISIF_BIT_MSB_10,
+ ISIF_BIT_MSB_9,
+ ISIF_BIT_MSB_8,
+ ISIF_BIT_MSB_7
+};
+
+enum isif_cfa_pattern {
+ ISIF_CFA_PAT_MOSAIC,
+ ISIF_CFA_PAT_STRIPE
+};
+
+struct isif_params_raw {
+ /* isif pixel format */
+ enum ccdc_pixfmt pix_fmt;
+ /* isif frame format */
+ enum ccdc_frmfmt frm_fmt;
+ /* video window */
+ struct v4l2_rect win;
+ /* field polarity */
+ enum vpfe_pin_pol fid_pol;
+ /* interface VD polarity */
+ enum vpfe_pin_pol vd_pol;
+ /* interface HD polarity */
+ enum vpfe_pin_pol hd_pol;
+ /* buffer type. Applicable for interlaced mode */
+ enum ccdc_buftype buf_type;
+ /* Gain values */
+ struct isif_gain gain;
+ /* cfa pattern */
+ enum isif_cfa_pattern cfa_pat;
+ /* Data MSB position */
+ enum isif_data_msb data_msb;
+ /* Enable horizontal flip */
+ unsigned char horz_flip_en;
+ /* Enable image invert vertically */
+ unsigned char image_invert_en;
+
+ /* all the userland defined stuff*/
+ struct isif_config_params_raw config_params;
+};
+
+enum isif_data_pack {
+ ISIF_PACK_16BIT,
+ ISIF_PACK_12BIT,
+ ISIF_PACK_8BIT
+};
+
+#define ISIF_WIN_NTSC {0, 0, 720, 480}
+#define ISIF_WIN_VGA {0, 0, 640, 480}
+
+#endif
+#endif
diff --git a/include/media/davinci/vpss.h b/include/media/davinci/vpss.h
index fcdff74..c59cc02 100644
--- a/include/media/davinci/vpss.h
+++ b/include/media/davinci/vpss.h
@@ -29,7 +29,19 @@
/* selector for ccdc input selection on DM355 */
enum vpss_ccdc_source_sel {
VPSS_CCDCIN,
- VPSS_HSSIIN
+ VPSS_HSSIIN,
+ VPSS_PGLPBK, /* for DM365 only */
+ VPSS_CCDCPG /* for DM365 only */
+};
+
+struct vpss_sync_pol {
+ unsigned int ccdpg_hdpol:1;
+ unsigned int ccdpg_vdpol:1;
+};
+
+struct vpss_pg_frame_size {
+ short hlpfr;
+ short pplen;
};
/* Used for enable/diable VPSS Clock */
@@ -47,12 +59,38 @@
*/
VPSS_VENC_CLOCK_SEL,
VPSS_VPBE_CLOCK,
+ /* DM365 only clocks */
+ VPSS_IPIPEIF_CLOCK,
+ VPSS_RSZ_CLOCK,
+ VPSS_BL_CLOCK,
+ /*
+ * When using VPSS_PCLK_INTERNAL in vpss_enable_clock() api
+ * following applies:-
+ * en = 0 disable internal PCLK
+ * en = 1 enables internal PCLK
+ */
+ VPSS_PCLK_INTERNAL,
+ /*
+ * When using VPSS_PSYNC_CLOCK_SEL in vpss_enable_clock() api
+ * following applies:-
+ * en = 0 enables MMR clock
+ * en = 1 enables VPSS clock
+ */
+ VPSS_PSYNC_CLOCK_SEL,
+ VPSS_LDC_CLOCK_SEL,
+ VPSS_OSD_CLOCK_SEL,
+ VPSS_FDIF_CLOCK,
+ VPSS_LDC_CLOCK
};
/* select input to ccdc on dm355 */
int vpss_select_ccdc_source(enum vpss_ccdc_source_sel src_sel);
/* enable/disable a vpss clock, 0 - success, -1 - failure */
int vpss_enable_clock(enum vpss_clock_sel clock_sel, int en);
+/* set sync polarity, only for DM365*/
+void dm365_vpss_set_sync_pol(struct vpss_sync_pol);
+/* set the PG_FRAME_SIZE register, only for DM365 */
+void dm365_vpss_set_pg_frame_size(struct vpss_pg_frame_size);
/* wbl reset for dm644x */
enum vpss_wbl_sel {
@@ -65,5 +103,6 @@
VPSS_PCR_PREV_WBL_0,
VPSS_PCR_CCDC_WBL_O,
};
+/* clear wbl overflow flag for DM6446 */
int vpss_clear_wbl_overflow(enum vpss_wbl_sel wbl_sel);
#endif
diff --git a/include/media/ir-common.h b/include/media/ir-common.h
index 2c6af24..c662980 100644
--- a/include/media/ir-common.h
+++ b/include/media/ir-common.h
@@ -35,7 +35,7 @@
struct ir_input_state {
/* configuration */
- int ir_type;
+ u64 ir_type;
/* key info */
u32 ir_key; /* ir scancode */
@@ -84,7 +84,7 @@
/* Routines from ir-functions.c */
int ir_input_init(struct input_dev *dev, struct ir_input_state *ir,
- int ir_type);
+ const u64 ir_type);
void ir_input_nokey(struct input_dev *dev, struct ir_input_state *ir);
void ir_input_keydown(struct input_dev *dev, struct ir_input_state *ir,
u32 ir_key);
@@ -162,4 +162,6 @@
extern struct ir_scancode_table ir_codes_videomate_s350_table;
extern struct ir_scancode_table ir_codes_gadmei_rm008z_table;
extern struct ir_scancode_table ir_codes_nec_terratec_cinergy_xs_table;
+extern struct ir_scancode_table ir_codes_winfast_usbii_deluxe_table;
+extern struct ir_scancode_table ir_codes_kworld_315u_table;
#endif
diff --git a/include/media/ir-core.h b/include/media/ir-core.h
index 299d201..61c223b 100644
--- a/include/media/ir-core.h
+++ b/include/media/ir-core.h
@@ -21,13 +21,11 @@
#define IR_dprintk(level, fmt, arg...) if (ir_core_debug >= level) \
printk(KERN_DEBUG "%s: " fmt , __func__, ## arg)
-enum ir_type {
- IR_TYPE_UNKNOWN = 0,
- IR_TYPE_RC5 = 1,
- IR_TYPE_PD = 2, /* Pulse distance encoded IR */
- IR_TYPE_NEC = 3,
- IR_TYPE_OTHER = 99,
-};
+#define IR_TYPE_UNKNOWN 0
+#define IR_TYPE_RC5 (1 << 0) /* Philips RC5 protocol */
+#define IR_TYPE_PD (1 << 1) /* Pulse distance encoded IR */
+#define IR_TYPE_NEC (1 << 2)
+#define IR_TYPE_OTHER (((u64)1) << 63l)
struct ir_scancode {
u16 scancode;
@@ -37,26 +35,40 @@
struct ir_scancode_table {
struct ir_scancode *scan;
int size;
- enum ir_type ir_type;
+ u64 ir_type;
spinlock_t lock;
};
-struct ir_input_dev {
- struct input_dev *dev;
- struct ir_scancode_table rc_tab;
+struct ir_dev_props {
+ unsigned long allowed_protos;
+ void *priv;
+ int (*change_protocol)(void *priv, u64 ir_type);
};
+
+struct ir_input_dev {
+ struct input_dev *dev; /* Input device*/
+ struct ir_scancode_table rc_tab; /* scan/key table */
+ unsigned long devno; /* device number */
+ struct attribute_group attr; /* IR attributes */
+ struct device *class_dev; /* virtual class dev */
+ const struct ir_dev_props *props; /* Device properties */
+};
+#define to_ir_input_dev(_attr) container_of(_attr, struct ir_input_dev, attr)
+
/* Routines from ir-keytable.c */
u32 ir_g_keycode_from_table(struct input_dev *input_dev,
u32 scancode);
-int ir_set_keycode_table(struct input_dev *input_dev,
- struct ir_scancode_table *rc_tab);
-
-int ir_roundup_tablesize(int n_elems);
int ir_input_register(struct input_dev *dev,
- struct ir_scancode_table *ir_codes);
+ const struct ir_scancode_table *ir_codes,
+ const struct ir_dev_props *props);
void ir_input_unregister(struct input_dev *input_dev);
+/* Routines from ir-sysfs.c */
+
+int ir_register_class(struct input_dev *input_dev);
+void ir_unregister_class(struct input_dev *input_dev);
+
#endif
diff --git a/include/media/ir-kbd-i2c.h b/include/media/ir-kbd-i2c.h
index aaf65e8..9142936 100644
--- a/include/media/ir-kbd-i2c.h
+++ b/include/media/ir-kbd-i2c.h
@@ -36,7 +36,7 @@
struct IR_i2c_init_data {
struct ir_scancode_table *ir_codes;
const char *name;
- int type; /* IR_TYPE_RC5, IR_TYPE_PD, etc */
+ u64 type; /* IR_TYPE_RC5, IR_TYPE_PD, etc */
/*
* Specify either a function pointer or a value indicating one of
* ir_kbd_i2c's internal get_key functions
diff --git a/include/media/ov772x.h b/include/media/ov772x.h
index 14c77ef..548bf11 100644
--- a/include/media/ov772x.h
+++ b/include/media/ov772x.h
@@ -15,8 +15,9 @@
#include <media/soc_camera.h>
/* for flags */
-#define OV772X_FLAG_VFLIP 0x00000001 /* Vertical flip image */
-#define OV772X_FLAG_HFLIP 0x00000002 /* Horizontal flip image */
+#define OV772X_FLAG_VFLIP (1 << 0) /* Vertical flip image */
+#define OV772X_FLAG_HFLIP (1 << 1) /* Horizontal flip image */
+#define OV772X_FLAG_8BIT (1 << 2) /* default 10 bit */
/*
* for Edge ctrl
@@ -53,9 +54,8 @@
* ov772x camera info
*/
struct ov772x_camera_info {
- unsigned long buswidth;
- unsigned long flags;
- struct ov772x_edge_ctrl edgectrl;
+ unsigned long flags;
+ struct ov772x_edge_ctrl edgectrl;
};
#endif /* __OV772X_H__ */
diff --git a/include/media/saa7146_vv.h b/include/media/saa7146_vv.h
index 4aeff96..b9da1f5 100644
--- a/include/media/saa7146_vv.h
+++ b/include/media/saa7146_vv.h
@@ -188,6 +188,7 @@
void saa7146_dma_free(struct saa7146_dev* dev,struct videobuf_queue *q,
struct saa7146_buf *buf);
+int saa7146_vv_devinit(struct saa7146_dev *dev);
int saa7146_vv_init(struct saa7146_dev* dev, struct saa7146_ext_vv *ext_vv);
int saa7146_vv_release(struct saa7146_dev* dev);
diff --git a/include/media/soc_camera.h b/include/media/soc_camera.h
index dcc5b86..9d69f01b 100644
--- a/include/media/soc_camera.h
+++ b/include/media/soc_camera.h
@@ -81,6 +81,8 @@
int (*set_bus_param)(struct soc_camera_device *, __u32);
int (*get_ctrl)(struct soc_camera_device *, struct v4l2_control *);
int (*set_ctrl)(struct soc_camera_device *, struct v4l2_control *);
+ int (*get_parm)(struct soc_camera_device *, struct v4l2_streamparm *);
+ int (*set_parm)(struct soc_camera_device *, struct v4l2_streamparm *);
unsigned int (*poll)(struct file *, poll_table *);
const struct v4l2_queryctrl *controls;
int num_controls;
diff --git a/include/media/timb_radio.h b/include/media/timb_radio.h
new file mode 100644
index 0000000..fcd32a3
--- /dev/null
+++ b/include/media/timb_radio.h
@@ -0,0 +1,36 @@
+/*
+ * timb_radio.h Platform struct for the Timberdale radio driver
+ * Copyright (c) 2009 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _TIMB_RADIO_
+#define _TIMB_RADIO_ 1
+
+#include <linux/i2c.h>
+
+struct timb_radio_platform_data {
+ int i2c_adapter; /* I2C adapter where the tuner and dsp are attached */
+ struct {
+ const char *module_name;
+ struct i2c_board_info *info;
+ } tuner;
+ struct {
+ const char *module_name;
+ struct i2c_board_info *info;
+ } dsp;
+};
+
+#endif
diff --git a/include/media/tuner.h b/include/media/tuner.h
index 4d5b53f..5505c53 100644
--- a/include/media/tuner.h
+++ b/include/media/tuner.h
@@ -129,6 +129,7 @@
#define TUNER_PARTSNIC_PTI_5NF05 81
#define TUNER_PHILIPS_CU1216L 82
#define TUNER_NXP_TDA18271 83
+#define TUNER_SONY_BTF_PXN01Z 84
/* tv card specific */
#define TDA9887_PRESENT (1<<0)
diff --git a/include/media/tvp7002.h b/include/media/tvp7002.h
new file mode 100644
index 0000000..ee43534
--- /dev/null
+++ b/include/media/tvp7002.h
@@ -0,0 +1,56 @@
+/* Texas Instruments Triple 8-/10-BIT 165-/110-MSPS Video and Graphics
+ * Digitizer with Horizontal PLL registers
+ *
+ * Copyright (C) 2009 Texas Instruments Inc
+ * Author: Santiago Nunez-Corrales <santiago.nunez@ridgerun.com>
+ *
+ * This code is partially based upon the TVP5150 driver
+ * written by Mauro Carvalho Chehab (mchehab@infradead.org),
+ * the TVP514x driver written by Vaibhav Hiremath <hvaibhav@ti.com>
+ * and the TVP7002 driver in the TI LSP 2.10.00.14
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef _TVP7002_H_
+#define _TVP7002_H_
+
+/* Platform-dependent data
+ *
+ * clk_polarity:
+ * 0 -> data clocked out on rising edge of DATACLK signal
+ * 1 -> data clocked out on falling edge of DATACLK signal
+ * hs_polarity:
+ * 0 -> active low HSYNC output
+ * 1 -> active high HSYNC output
+ * sog_polarity:
+ * 0 -> normal operation
+ * 1 -> operation with polarity inverted
+ * vs_polarity:
+ * 0 -> active low VSYNC output
+ * 1 -> active high VSYNC output
+ * fid_polarity:
+ * 0 -> the field ID output is set to logic 1 for an odd
+ * field (field 1) and set to logic 0 for an even
+ * field (field 0).
+ * 1 -> operation with polarity inverted.
+ */
+struct tvp7002_config {
+ u8 clk_polarity;
+ u8 hs_polarity;
+ u8 vs_polarity;
+ u8 fid_polarity;
+ u8 sog_polarity;
+};
+#endif
diff --git a/include/media/tw9910.h b/include/media/tw9910.h
index 5e2895a..90bcf1f 100644
--- a/include/media/tw9910.h
+++ b/include/media/tw9910.h
@@ -30,8 +30,8 @@
};
struct tw9910_video_info {
- unsigned long buswidth;
- enum tw9910_mpout_pin mpout;
+ unsigned long buswidth;
+ enum tw9910_mpout_pin mpout;
};
diff --git a/include/media/v4l2-chip-ident.h b/include/media/v4l2-chip-ident.h
index 6cc107d..56abf21 100644
--- a/include/media/v4l2-chip-ident.h
+++ b/include/media/v4l2-chip-ident.h
@@ -39,6 +39,7 @@
/* module saa7115: reserved range 101-149 */
V4L2_IDENT_SAA7111 = 101,
+ V4L2_IDENT_SAA7111A = 102,
V4L2_IDENT_SAA7113 = 103,
V4L2_IDENT_SAA7114 = 104,
V4L2_IDENT_SAA7115 = 105,
@@ -134,6 +135,9 @@
/* modules tef6862: just ident 6862 */
V4L2_IDENT_TEF6862 = 6862,
+ /* module tvp7002: just ident 7002 */
+ V4L2_IDENT_TVP7002 = 7002,
+
/* module adv7170: just ident 7170 */
V4L2_IDENT_ADV7170 = 7170,
@@ -155,6 +159,9 @@
/* module adv7343: just ident 7343 */
V4L2_IDENT_ADV7343 = 7343,
+ /* module saa7706h: just ident 7706 */
+ V4L2_IDENT_SAA7706H = 7706,
+
/* module wm8739: just ident 8739 */
V4L2_IDENT_WM8739 = 8739,
diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h
index 9ba99cd..2bcdca0 100644
--- a/include/media/v4l2-subdev.h
+++ b/include/media/v4l2-subdev.h
@@ -180,6 +180,7 @@
int (*s_clock_freq)(struct v4l2_subdev *sd, u32 freq);
int (*s_i2s_clock_freq)(struct v4l2_subdev *sd, u32 freq);
int (*s_routing)(struct v4l2_subdev *sd, u32 input, u32 output, u32 config);
+ int (*s_stream)(struct v4l2_subdev *sd, int enable);
};
/*
diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h
index 7c44499..d80b6db 100644
--- a/include/scsi/scsi_device.h
+++ b/include/scsi/scsi_device.h
@@ -348,7 +348,8 @@
struct scsi_sense_hdr *);
extern int scsi_test_unit_ready(struct scsi_device *sdev, int timeout,
int retries, struct scsi_sense_hdr *sshdr);
-extern unsigned char *scsi_get_vpd_page(struct scsi_device *, u8 page);
+extern int scsi_get_vpd_page(struct scsi_device *, u8 page, unsigned char *buf,
+ int buf_len);
extern int scsi_device_set_state(struct scsi_device *sdev,
enum scsi_device_state state);
extern struct scsi_event *sdev_evt_alloc(enum scsi_device_event evt_type,
diff --git a/include/scsi/scsi_transport_sas.h b/include/scsi/scsi_transport_sas.h
index 61ad359..ffeebc3 100644
--- a/include/scsi/scsi_transport_sas.h
+++ b/include/scsi/scsi_transport_sas.h
@@ -107,6 +107,8 @@
struct sas_rphy rphy;
/* flags */
unsigned ready_led_meaning:1;
+ unsigned tlr_supported:1;
+ unsigned tlr_enabled:1;
/* parameters */
u16 I_T_nexus_loss_timeout;
u16 initiator_response_timeout;
@@ -181,6 +183,11 @@
extern void sas_phy_delete(struct sas_phy *);
extern int scsi_is_sas_phy(const struct device *);
+unsigned int sas_tlr_supported(struct scsi_device *);
+unsigned int sas_is_tlr_enabled(struct scsi_device *);
+void sas_disable_tlr(struct scsi_device *);
+void sas_enable_tlr(struct scsi_device *);
+
extern struct sas_rphy *sas_end_device_alloc(struct sas_port *);
extern struct sas_rphy *sas_expander_alloc(struct sas_port *, enum sas_device_type);
void sas_rphy_free(struct sas_rphy *);
diff --git a/include/video/sh_mobile_lcdc.h b/include/video/sh_mobile_lcdc.h
index 2882054..2cc893f 100644
--- a/include/video/sh_mobile_lcdc.h
+++ b/include/video/sh_mobile_lcdc.h
@@ -34,6 +34,8 @@
#define LCDC_FLAGS_HSCNT (1 << 3) /* Disable HSYNC during VBLANK */
#define LCDC_FLAGS_DWCNT (1 << 4) /* Disable dotclock during blanking */
+#define FBIO_WAITFORVSYNC _IOW('F', 0x20, __u32)
+
struct sh_mobile_lcdc_sys_bus_cfg {
unsigned long ldmt2r;
unsigned long ldmt3r;
diff --git a/init/Kconfig b/init/Kconfig
index d95ca7c..1510e17 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -1262,4 +1262,8 @@
config PREEMPT_NOTIFIERS
bool
+config PADATA
+ depends on SMP
+ bool
+
source "kernel/Kconfig.locks"
diff --git a/kernel/Makefile b/kernel/Makefile
index 864ff75..6aebdeb 100644
--- a/kernel/Makefile
+++ b/kernel/Makefile
@@ -100,6 +100,7 @@
obj-$(CONFIG_PERF_EVENTS) += perf_event.o
obj-$(CONFIG_HAVE_HW_BREAKPOINT) += hw_breakpoint.o
obj-$(CONFIG_USER_RETURN_NOTIFIER) += user-return-notifier.o
+obj-$(CONFIG_PADATA) += padata.o
ifneq ($(CONFIG_SCHED_OMIT_FRAME_POINTER),y)
# According to Alan Modra <alan@linuxcare.com.au>, the -fno-omit-frame-pointer is
diff --git a/kernel/padata.c b/kernel/padata.c
new file mode 100644
index 0000000..6f9bcb8
--- /dev/null
+++ b/kernel/padata.c
@@ -0,0 +1,690 @@
+/*
+ * padata.c - generic interface to process data streams in parallel
+ *
+ * Copyright (C) 2008, 2009 secunet Security Networks AG
+ * Copyright (C) 2008, 2009 Steffen Klassert <steffen.klassert@secunet.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/module.h>
+#include <linux/cpumask.h>
+#include <linux/err.h>
+#include <linux/cpu.h>
+#include <linux/padata.h>
+#include <linux/mutex.h>
+#include <linux/sched.h>
+#include <linux/rcupdate.h>
+
+#define MAX_SEQ_NR INT_MAX - NR_CPUS
+#define MAX_OBJ_NUM 10000 * NR_CPUS
+
+static int padata_index_to_cpu(struct parallel_data *pd, int cpu_index)
+{
+ int cpu, target_cpu;
+
+ target_cpu = cpumask_first(pd->cpumask);
+ for (cpu = 0; cpu < cpu_index; cpu++)
+ target_cpu = cpumask_next(target_cpu, pd->cpumask);
+
+ return target_cpu;
+}
+
+static int padata_cpu_hash(struct padata_priv *padata)
+{
+ int cpu_index;
+ struct parallel_data *pd;
+
+ pd = padata->pd;
+
+ /*
+ * Hash the sequence numbers to the cpus by taking
+ * seq_nr mod. number of cpus in use.
+ */
+ cpu_index = padata->seq_nr % cpumask_weight(pd->cpumask);
+
+ return padata_index_to_cpu(pd, cpu_index);
+}
+
+static void padata_parallel_worker(struct work_struct *work)
+{
+ struct padata_queue *queue;
+ struct parallel_data *pd;
+ struct padata_instance *pinst;
+ LIST_HEAD(local_list);
+
+ local_bh_disable();
+ queue = container_of(work, struct padata_queue, pwork);
+ pd = queue->pd;
+ pinst = pd->pinst;
+
+ spin_lock(&queue->parallel.lock);
+ list_replace_init(&queue->parallel.list, &local_list);
+ spin_unlock(&queue->parallel.lock);
+
+ while (!list_empty(&local_list)) {
+ struct padata_priv *padata;
+
+ padata = list_entry(local_list.next,
+ struct padata_priv, list);
+
+ list_del_init(&padata->list);
+
+ padata->parallel(padata);
+ }
+
+ local_bh_enable();
+}
+
+/*
+ * padata_do_parallel - padata parallelization function
+ *
+ * @pinst: padata instance
+ * @padata: object to be parallelized
+ * @cb_cpu: cpu the serialization callback function will run on,
+ * must be in the cpumask of padata.
+ *
+ * The parallelization callback function will run with BHs off.
+ * Note: Every object which is parallelized by padata_do_parallel
+ * must be seen by padata_do_serial.
+ */
+int padata_do_parallel(struct padata_instance *pinst,
+ struct padata_priv *padata, int cb_cpu)
+{
+ int target_cpu, err;
+ struct padata_queue *queue;
+ struct parallel_data *pd;
+
+ rcu_read_lock_bh();
+
+ pd = rcu_dereference(pinst->pd);
+
+ err = 0;
+ if (!(pinst->flags & PADATA_INIT))
+ goto out;
+
+ err = -EBUSY;
+ if ((pinst->flags & PADATA_RESET))
+ goto out;
+
+ if (atomic_read(&pd->refcnt) >= MAX_OBJ_NUM)
+ goto out;
+
+ err = -EINVAL;
+ if (!cpumask_test_cpu(cb_cpu, pd->cpumask))
+ goto out;
+
+ err = -EINPROGRESS;
+ atomic_inc(&pd->refcnt);
+ padata->pd = pd;
+ padata->cb_cpu = cb_cpu;
+
+ if (unlikely(atomic_read(&pd->seq_nr) == pd->max_seq_nr))
+ atomic_set(&pd->seq_nr, -1);
+
+ padata->seq_nr = atomic_inc_return(&pd->seq_nr);
+
+ target_cpu = padata_cpu_hash(padata);
+ queue = per_cpu_ptr(pd->queue, target_cpu);
+
+ spin_lock(&queue->parallel.lock);
+ list_add_tail(&padata->list, &queue->parallel.list);
+ spin_unlock(&queue->parallel.lock);
+
+ queue_work_on(target_cpu, pinst->wq, &queue->pwork);
+
+out:
+ rcu_read_unlock_bh();
+
+ return err;
+}
+EXPORT_SYMBOL(padata_do_parallel);
+
+static struct padata_priv *padata_get_next(struct parallel_data *pd)
+{
+ int cpu, num_cpus, empty, calc_seq_nr;
+ int seq_nr, next_nr, overrun, next_overrun;
+ struct padata_queue *queue, *next_queue;
+ struct padata_priv *padata;
+ struct padata_list *reorder;
+
+ empty = 0;
+ next_nr = -1;
+ next_overrun = 0;
+ next_queue = NULL;
+
+ num_cpus = cpumask_weight(pd->cpumask);
+
+ for_each_cpu(cpu, pd->cpumask) {
+ queue = per_cpu_ptr(pd->queue, cpu);
+ reorder = &queue->reorder;
+
+ /*
+ * Calculate the seq_nr of the object that should be
+ * next in this queue.
+ */
+ overrun = 0;
+ calc_seq_nr = (atomic_read(&queue->num_obj) * num_cpus)
+ + queue->cpu_index;
+
+ if (unlikely(calc_seq_nr > pd->max_seq_nr)) {
+ calc_seq_nr = calc_seq_nr - pd->max_seq_nr - 1;
+ overrun = 1;
+ }
+
+ if (!list_empty(&reorder->list)) {
+ padata = list_entry(reorder->list.next,
+ struct padata_priv, list);
+
+ seq_nr = padata->seq_nr;
+ BUG_ON(calc_seq_nr != seq_nr);
+ } else {
+ seq_nr = calc_seq_nr;
+ empty++;
+ }
+
+ if (next_nr < 0 || seq_nr < next_nr
+ || (next_overrun && !overrun)) {
+ next_nr = seq_nr;
+ next_overrun = overrun;
+ next_queue = queue;
+ }
+ }
+
+ padata = NULL;
+
+ if (empty == num_cpus)
+ goto out;
+
+ reorder = &next_queue->reorder;
+
+ if (!list_empty(&reorder->list)) {
+ padata = list_entry(reorder->list.next,
+ struct padata_priv, list);
+
+ if (unlikely(next_overrun)) {
+ for_each_cpu(cpu, pd->cpumask) {
+ queue = per_cpu_ptr(pd->queue, cpu);
+ atomic_set(&queue->num_obj, 0);
+ }
+ }
+
+ spin_lock(&reorder->lock);
+ list_del_init(&padata->list);
+ atomic_dec(&pd->reorder_objects);
+ spin_unlock(&reorder->lock);
+
+ atomic_inc(&next_queue->num_obj);
+
+ goto out;
+ }
+
+ if (next_nr % num_cpus == next_queue->cpu_index) {
+ padata = ERR_PTR(-ENODATA);
+ goto out;
+ }
+
+ padata = ERR_PTR(-EINPROGRESS);
+out:
+ return padata;
+}
+
+static void padata_reorder(struct parallel_data *pd)
+{
+ struct padata_priv *padata;
+ struct padata_queue *queue;
+ struct padata_instance *pinst = pd->pinst;
+
+try_again:
+ if (!spin_trylock_bh(&pd->lock))
+ goto out;
+
+ while (1) {
+ padata = padata_get_next(pd);
+
+ if (!padata || PTR_ERR(padata) == -EINPROGRESS)
+ break;
+
+ if (PTR_ERR(padata) == -ENODATA) {
+ spin_unlock_bh(&pd->lock);
+ goto out;
+ }
+
+ queue = per_cpu_ptr(pd->queue, padata->cb_cpu);
+
+ spin_lock(&queue->serial.lock);
+ list_add_tail(&padata->list, &queue->serial.list);
+ spin_unlock(&queue->serial.lock);
+
+ queue_work_on(padata->cb_cpu, pinst->wq, &queue->swork);
+ }
+
+ spin_unlock_bh(&pd->lock);
+
+ if (atomic_read(&pd->reorder_objects))
+ goto try_again;
+
+out:
+ return;
+}
+
+static void padata_serial_worker(struct work_struct *work)
+{
+ struct padata_queue *queue;
+ struct parallel_data *pd;
+ LIST_HEAD(local_list);
+
+ local_bh_disable();
+ queue = container_of(work, struct padata_queue, swork);
+ pd = queue->pd;
+
+ spin_lock(&queue->serial.lock);
+ list_replace_init(&queue->serial.list, &local_list);
+ spin_unlock(&queue->serial.lock);
+
+ while (!list_empty(&local_list)) {
+ struct padata_priv *padata;
+
+ padata = list_entry(local_list.next,
+ struct padata_priv, list);
+
+ list_del_init(&padata->list);
+
+ padata->serial(padata);
+ atomic_dec(&pd->refcnt);
+ }
+ local_bh_enable();
+}
+
+/*
+ * padata_do_serial - padata serialization function
+ *
+ * @padata: object to be serialized.
+ *
+ * padata_do_serial must be called for every parallelized object.
+ * The serialization callback function will run with BHs off.
+ */
+void padata_do_serial(struct padata_priv *padata)
+{
+ int cpu;
+ struct padata_queue *queue;
+ struct parallel_data *pd;
+
+ pd = padata->pd;
+
+ cpu = get_cpu();
+ queue = per_cpu_ptr(pd->queue, cpu);
+
+ spin_lock(&queue->reorder.lock);
+ atomic_inc(&pd->reorder_objects);
+ list_add_tail(&padata->list, &queue->reorder.list);
+ spin_unlock(&queue->reorder.lock);
+
+ put_cpu();
+
+ padata_reorder(pd);
+}
+EXPORT_SYMBOL(padata_do_serial);
+
+static struct parallel_data *padata_alloc_pd(struct padata_instance *pinst,
+ const struct cpumask *cpumask)
+{
+ int cpu, cpu_index, num_cpus;
+ struct padata_queue *queue;
+ struct parallel_data *pd;
+
+ cpu_index = 0;
+
+ pd = kzalloc(sizeof(struct parallel_data), GFP_KERNEL);
+ if (!pd)
+ goto err;
+
+ pd->queue = alloc_percpu(struct padata_queue);
+ if (!pd->queue)
+ goto err_free_pd;
+
+ if (!alloc_cpumask_var(&pd->cpumask, GFP_KERNEL))
+ goto err_free_queue;
+
+ for_each_possible_cpu(cpu) {
+ queue = per_cpu_ptr(pd->queue, cpu);
+
+ queue->pd = pd;
+
+ if (cpumask_test_cpu(cpu, cpumask)
+ && cpumask_test_cpu(cpu, cpu_active_mask)) {
+ queue->cpu_index = cpu_index;
+ cpu_index++;
+ } else
+ queue->cpu_index = -1;
+
+ INIT_LIST_HEAD(&queue->reorder.list);
+ INIT_LIST_HEAD(&queue->parallel.list);
+ INIT_LIST_HEAD(&queue->serial.list);
+ spin_lock_init(&queue->reorder.lock);
+ spin_lock_init(&queue->parallel.lock);
+ spin_lock_init(&queue->serial.lock);
+
+ INIT_WORK(&queue->pwork, padata_parallel_worker);
+ INIT_WORK(&queue->swork, padata_serial_worker);
+ atomic_set(&queue->num_obj, 0);
+ }
+
+ cpumask_and(pd->cpumask, cpumask, cpu_active_mask);
+
+ num_cpus = cpumask_weight(pd->cpumask);
+ pd->max_seq_nr = (MAX_SEQ_NR / num_cpus) * num_cpus - 1;
+
+ atomic_set(&pd->seq_nr, -1);
+ atomic_set(&pd->reorder_objects, 0);
+ atomic_set(&pd->refcnt, 0);
+ pd->pinst = pinst;
+ spin_lock_init(&pd->lock);
+
+ return pd;
+
+err_free_queue:
+ free_percpu(pd->queue);
+err_free_pd:
+ kfree(pd);
+err:
+ return NULL;
+}
+
+static void padata_free_pd(struct parallel_data *pd)
+{
+ free_cpumask_var(pd->cpumask);
+ free_percpu(pd->queue);
+ kfree(pd);
+}
+
+static void padata_replace(struct padata_instance *pinst,
+ struct parallel_data *pd_new)
+{
+ struct parallel_data *pd_old = pinst->pd;
+
+ pinst->flags |= PADATA_RESET;
+
+ rcu_assign_pointer(pinst->pd, pd_new);
+
+ synchronize_rcu();
+
+ while (atomic_read(&pd_old->refcnt) != 0)
+ yield();
+
+ flush_workqueue(pinst->wq);
+
+ padata_free_pd(pd_old);
+
+ pinst->flags &= ~PADATA_RESET;
+}
+
+/*
+ * padata_set_cpumask - set the cpumask that padata should use
+ *
+ * @pinst: padata instance
+ * @cpumask: the cpumask to use
+ */
+int padata_set_cpumask(struct padata_instance *pinst,
+ cpumask_var_t cpumask)
+{
+ struct parallel_data *pd;
+ int err = 0;
+
+ might_sleep();
+
+ mutex_lock(&pinst->lock);
+
+ pd = padata_alloc_pd(pinst, cpumask);
+ if (!pd) {
+ err = -ENOMEM;
+ goto out;
+ }
+
+ cpumask_copy(pinst->cpumask, cpumask);
+
+ padata_replace(pinst, pd);
+
+out:
+ mutex_unlock(&pinst->lock);
+
+ return err;
+}
+EXPORT_SYMBOL(padata_set_cpumask);
+
+static int __padata_add_cpu(struct padata_instance *pinst, int cpu)
+{
+ struct parallel_data *pd;
+
+ if (cpumask_test_cpu(cpu, cpu_active_mask)) {
+ pd = padata_alloc_pd(pinst, pinst->cpumask);
+ if (!pd)
+ return -ENOMEM;
+
+ padata_replace(pinst, pd);
+ }
+
+ return 0;
+}
+
+/*
+ * padata_add_cpu - add a cpu to the padata cpumask
+ *
+ * @pinst: padata instance
+ * @cpu: cpu to add
+ */
+int padata_add_cpu(struct padata_instance *pinst, int cpu)
+{
+ int err;
+
+ might_sleep();
+
+ mutex_lock(&pinst->lock);
+
+ cpumask_set_cpu(cpu, pinst->cpumask);
+ err = __padata_add_cpu(pinst, cpu);
+
+ mutex_unlock(&pinst->lock);
+
+ return err;
+}
+EXPORT_SYMBOL(padata_add_cpu);
+
+static int __padata_remove_cpu(struct padata_instance *pinst, int cpu)
+{
+ struct parallel_data *pd;
+
+ if (cpumask_test_cpu(cpu, cpu_online_mask)) {
+ pd = padata_alloc_pd(pinst, pinst->cpumask);
+ if (!pd)
+ return -ENOMEM;
+
+ padata_replace(pinst, pd);
+ }
+
+ return 0;
+}
+
+/*
+ * padata_remove_cpu - remove a cpu from the padata cpumask
+ *
+ * @pinst: padata instance
+ * @cpu: cpu to remove
+ */
+int padata_remove_cpu(struct padata_instance *pinst, int cpu)
+{
+ int err;
+
+ might_sleep();
+
+ mutex_lock(&pinst->lock);
+
+ cpumask_clear_cpu(cpu, pinst->cpumask);
+ err = __padata_remove_cpu(pinst, cpu);
+
+ mutex_unlock(&pinst->lock);
+
+ return err;
+}
+EXPORT_SYMBOL(padata_remove_cpu);
+
+/*
+ * padata_start - start the parallel processing
+ *
+ * @pinst: padata instance to start
+ */
+void padata_start(struct padata_instance *pinst)
+{
+ might_sleep();
+
+ mutex_lock(&pinst->lock);
+ pinst->flags |= PADATA_INIT;
+ mutex_unlock(&pinst->lock);
+}
+EXPORT_SYMBOL(padata_start);
+
+/*
+ * padata_stop - stop the parallel processing
+ *
+ * @pinst: padata instance to stop
+ */
+void padata_stop(struct padata_instance *pinst)
+{
+ might_sleep();
+
+ mutex_lock(&pinst->lock);
+ pinst->flags &= ~PADATA_INIT;
+ mutex_unlock(&pinst->lock);
+}
+EXPORT_SYMBOL(padata_stop);
+
+static int __cpuinit padata_cpu_callback(struct notifier_block *nfb,
+ unsigned long action, void *hcpu)
+{
+ int err;
+ struct padata_instance *pinst;
+ int cpu = (unsigned long)hcpu;
+
+ pinst = container_of(nfb, struct padata_instance, cpu_notifier);
+
+ switch (action) {
+ case CPU_ONLINE:
+ case CPU_ONLINE_FROZEN:
+ if (!cpumask_test_cpu(cpu, pinst->cpumask))
+ break;
+ mutex_lock(&pinst->lock);
+ err = __padata_add_cpu(pinst, cpu);
+ mutex_unlock(&pinst->lock);
+ if (err)
+ return NOTIFY_BAD;
+ break;
+
+ case CPU_DOWN_PREPARE:
+ case CPU_DOWN_PREPARE_FROZEN:
+ if (!cpumask_test_cpu(cpu, pinst->cpumask))
+ break;
+ mutex_lock(&pinst->lock);
+ err = __padata_remove_cpu(pinst, cpu);
+ mutex_unlock(&pinst->lock);
+ if (err)
+ return NOTIFY_BAD;
+ break;
+
+ case CPU_UP_CANCELED:
+ case CPU_UP_CANCELED_FROZEN:
+ if (!cpumask_test_cpu(cpu, pinst->cpumask))
+ break;
+ mutex_lock(&pinst->lock);
+ __padata_remove_cpu(pinst, cpu);
+ mutex_unlock(&pinst->lock);
+
+ case CPU_DOWN_FAILED:
+ case CPU_DOWN_FAILED_FROZEN:
+ if (!cpumask_test_cpu(cpu, pinst->cpumask))
+ break;
+ mutex_lock(&pinst->lock);
+ __padata_add_cpu(pinst, cpu);
+ mutex_unlock(&pinst->lock);
+ }
+
+ return NOTIFY_OK;
+}
+
+/*
+ * padata_alloc - allocate and initialize a padata instance
+ *
+ * @cpumask: cpumask that padata uses for parallelization
+ * @wq: workqueue to use for the allocated padata instance
+ */
+struct padata_instance *padata_alloc(const struct cpumask *cpumask,
+ struct workqueue_struct *wq)
+{
+ int err;
+ struct padata_instance *pinst;
+ struct parallel_data *pd;
+
+ pinst = kzalloc(sizeof(struct padata_instance), GFP_KERNEL);
+ if (!pinst)
+ goto err;
+
+ pd = padata_alloc_pd(pinst, cpumask);
+ if (!pd)
+ goto err_free_inst;
+
+ rcu_assign_pointer(pinst->pd, pd);
+
+ pinst->wq = wq;
+
+ cpumask_copy(pinst->cpumask, cpumask);
+
+ pinst->flags = 0;
+
+ pinst->cpu_notifier.notifier_call = padata_cpu_callback;
+ pinst->cpu_notifier.priority = 0;
+ err = register_hotcpu_notifier(&pinst->cpu_notifier);
+ if (err)
+ goto err_free_pd;
+
+ mutex_init(&pinst->lock);
+
+ return pinst;
+
+err_free_pd:
+ padata_free_pd(pd);
+err_free_inst:
+ kfree(pinst);
+err:
+ return NULL;
+}
+EXPORT_SYMBOL(padata_alloc);
+
+/*
+ * padata_free - free a padata instance
+ *
+ * @ padata_inst: padata instance to free
+ */
+void padata_free(struct padata_instance *pinst)
+{
+ padata_stop(pinst);
+
+ synchronize_rcu();
+
+ while (atomic_read(&pinst->pd->refcnt) != 0)
+ yield();
+
+ unregister_hotcpu_notifier(&pinst->cpu_notifier);
+ padata_free_pd(pinst->pd);
+ kfree(pinst);
+}
+EXPORT_SYMBOL(padata_free);
diff --git a/kernel/power/Kconfig b/kernel/power/Kconfig
index 91e09d3..4c9cffc 100644
--- a/kernel/power/Kconfig
+++ b/kernel/power/Kconfig
@@ -222,3 +222,8 @@
and the bus type drivers of the buses the devices are on are
responsible for the actual handling of the autosuspend requests and
wake-up events.
+
+config PM_OPS
+ bool
+ depends on PM_SLEEP || PM_RUNTIME
+ default y
diff --git a/kernel/resource.c b/kernel/resource.c
index af96c1e4..24e9e60 100644
--- a/kernel/resource.c
+++ b/kernel/resource.c
@@ -188,6 +188,36 @@
return -EINVAL;
}
+static void __release_child_resources(struct resource *r)
+{
+ struct resource *tmp, *p;
+ resource_size_t size;
+
+ p = r->child;
+ r->child = NULL;
+ while (p) {
+ tmp = p;
+ p = p->sibling;
+
+ tmp->parent = NULL;
+ tmp->sibling = NULL;
+ __release_child_resources(tmp);
+
+ printk(KERN_DEBUG "release child resource %pR\n", tmp);
+ /* need to restore size, and keep flags */
+ size = resource_size(tmp);
+ tmp->start = 0;
+ tmp->end = size - 1;
+ }
+}
+
+void release_child_resources(struct resource *r)
+{
+ write_lock(&resource_lock);
+ __release_child_resources(r);
+ write_unlock(&resource_lock);
+}
+
/**
* request_resource - request and reserve an I/O or memory resource
* @root: root resource descriptor
@@ -303,8 +333,10 @@
static int find_resource(struct resource *root, struct resource *new,
resource_size_t size, resource_size_t min,
resource_size_t max, resource_size_t align,
- void (*alignf)(void *, struct resource *,
- resource_size_t, resource_size_t),
+ resource_size_t (*alignf)(void *,
+ const struct resource *,
+ resource_size_t,
+ resource_size_t),
void *alignf_data)
{
struct resource *this = root->child;
@@ -330,7 +362,7 @@
tmp.end = max;
tmp.start = ALIGN(tmp.start, align);
if (alignf)
- alignf(alignf_data, &tmp, size, align);
+ tmp.start = alignf(alignf_data, &tmp, size, align);
if (tmp.start < tmp.end && tmp.end - tmp.start >= size - 1) {
new->start = tmp.start;
new->end = tmp.start + size - 1;
@@ -358,8 +390,10 @@
int allocate_resource(struct resource *root, struct resource *new,
resource_size_t size, resource_size_t min,
resource_size_t max, resource_size_t align,
- void (*alignf)(void *, struct resource *,
- resource_size_t, resource_size_t),
+ resource_size_t (*alignf)(void *,
+ const struct resource *,
+ resource_size_t,
+ resource_size_t),
void *alignf_data)
{
int err;
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 25c3ed5..d62e3cd 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -355,7 +355,7 @@
config DEBUG_KMEMLEAK
bool "Kernel memory leak detector"
depends on DEBUG_KERNEL && EXPERIMENTAL && !MEMORY_HOTPLUG && \
- (X86 || ARM || PPC || S390)
+ (X86 || ARM || PPC || S390 || SUPERH)
select DEBUG_FS if SYSFS
select STACKTRACE if STACKTRACE_SUPPORT
diff --git a/mm/Kconfig b/mm/Kconfig
index 17b8947..d34c2b9 100644
--- a/mm/Kconfig
+++ b/mm/Kconfig
@@ -195,7 +195,7 @@
config NR_QUICK
int
depends on QUICKLIST
- default "2" if SUPERH || AVR32
+ default "2" if AVR32
default "1"
config VIRT_TO_BUS
diff --git a/net/bluetooth/hidp/core.c b/net/bluetooth/hidp/core.c
index fc6ec1e..280529a 100644
--- a/net/bluetooth/hidp/core.c
+++ b/net/bluetooth/hidp/core.c
@@ -313,10 +313,21 @@
return hidp_queue_report(session, buf, rsize);
}
-static int hidp_output_raw_report(struct hid_device *hid, unsigned char *data, size_t count)
+static int hidp_output_raw_report(struct hid_device *hid, unsigned char *data, size_t count,
+ unsigned char report_type)
{
- if (hidp_send_ctrl_message(hid->driver_data,
- HIDP_TRANS_SET_REPORT | HIDP_DATA_RTYPE_FEATURE,
+ switch (report_type) {
+ case HID_FEATURE_REPORT:
+ report_type = HIDP_TRANS_SET_REPORT | HIDP_DATA_RTYPE_FEATURE;
+ break;
+ case HID_OUTPUT_REPORT:
+ report_type = HIDP_TRANS_DATA | HIDP_DATA_RTYPE_OUPUT;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (hidp_send_ctrl_message(hid->driver_data, report_type,
data, count))
return -ENOMEM;
return count;
diff --git a/net/xfrm/xfrm_algo.c b/net/xfrm/xfrm_algo.c
index 743c0134..8b4d6e3 100644
--- a/net/xfrm/xfrm_algo.c
+++ b/net/xfrm/xfrm_algo.c
@@ -125,6 +125,22 @@
.sadb_alg_maxbits = 256
}
},
+{
+ .name = "rfc4543(gcm(aes))",
+
+ .uinfo = {
+ .aead = {
+ .icv_truncbits = 128,
+ }
+ },
+
+ .desc = {
+ .sadb_alg_id = SADB_X_EALG_NULL_AES_GMAC,
+ .sadb_alg_ivlen = 8,
+ .sadb_alg_minbits = 128,
+ .sadb_alg_maxbits = 256
+ }
+},
};
static struct xfrm_algo_desc aalg_list[] = {
diff --git a/scripts/.gitignore b/scripts/.gitignore
index 52cab46a..c5d5db5 100644
--- a/scripts/.gitignore
+++ b/scripts/.gitignore
@@ -6,5 +6,4 @@
pnmtologo
bin2c
unifdef
-binoffset
ihex2fw
diff --git a/scripts/binoffset.c b/scripts/binoffset.c
deleted file mode 100644
index 1a2e39b..0000000
--- a/scripts/binoffset.c
+++ /dev/null
@@ -1,163 +0,0 @@
-/***************************************************************************
- * binoffset.c
- * (C) 2002 Randy Dunlap <rdunlap@xenotime.net>
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-# binoffset.c:
-# - searches a (binary) file for a specified (binary) pattern
-# - returns the offset of the located pattern or ~0 if not found
-# - exits with exit status 0 normally or non-0 if pattern is not found
-# or any other error occurs.
-
-****************************************************************/
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <errno.h>
-#include <unistd.h>
-#include <fcntl.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <sys/mman.h>
-
-#define VERSION "0.1"
-#define BUF_SIZE (16 * 1024)
-#define PAT_SIZE 100
-
-char *progname;
-char *inputname;
-int inputfd;
-unsigned int bix; /* buf index */
-unsigned char patterns [PAT_SIZE] = {0}; /* byte-sized pattern array */
-int pat_len; /* actual number of pattern bytes */
-unsigned char *madr; /* mmap address */
-size_t filesize;
-int num_matches = 0;
-off_t firstloc = 0;
-
-void usage (void)
-{
- fprintf (stderr, "%s ver. %s\n", progname, VERSION);
- fprintf (stderr, "usage: %s filename pattern_bytes\n",
- progname);
- fprintf (stderr, " [prints location of pattern_bytes in file]\n");
- exit (1);
-}
-
-void get_pattern (int pat_count, char *pats [])
-{
- int ix, err, tmp;
-
-#ifdef DEBUG
- fprintf (stderr,"get_pattern: count = %d\n", pat_count);
- for (ix = 0; ix < pat_count; ix++)
- fprintf (stderr, " pat # %d: [%s]\n", ix, pats[ix]);
-#endif
-
- for (ix = 0; ix < pat_count; ix++) {
- tmp = 0;
- err = sscanf (pats[ix], "%5i", &tmp);
- if (err != 1 || tmp > 0xff) {
- fprintf (stderr, "pattern or value error in pattern # %d [%s]\n",
- ix, pats[ix]);
- usage ();
- }
- patterns [ix] = tmp;
- }
- pat_len = pat_count;
-}
-
-void search_pattern (void)
-{
- for (bix = 0; bix < filesize; bix++) {
- if (madr[bix] == patterns[0]) {
- if (memcmp (&madr[bix], patterns, pat_len) == 0) {
- if (num_matches == 0)
- firstloc = bix;
- num_matches++;
- }
- }
- }
-}
-
-#ifdef NOTDEF
-size_t get_filesize (int fd)
-{
- off_t end_off = lseek (fd, 0, SEEK_END);
- lseek (fd, 0, SEEK_SET);
- return (size_t) end_off;
-}
-#endif
-
-size_t get_filesize (int fd)
-{
- int err;
- struct stat stat;
-
- err = fstat (fd, &stat);
- fprintf (stderr, "filesize: %ld\n", err < 0 ? (long)err : stat.st_size);
- if (err < 0)
- return err;
- return (size_t) stat.st_size;
-}
-
-int main (int argc, char *argv [])
-{
- progname = argv[0];
-
- if (argc < 3)
- usage ();
-
- get_pattern (argc - 2, argv + 2);
-
- inputname = argv[1];
-
- inputfd = open (inputname, O_RDONLY);
- if (inputfd == -1) {
- fprintf (stderr, "%s: cannot open '%s'\n",
- progname, inputname);
- exit (3);
- }
-
- filesize = get_filesize (inputfd);
-
- madr = mmap (0, filesize, PROT_READ, MAP_PRIVATE, inputfd, 0);
- if (madr == MAP_FAILED) {
- fprintf (stderr, "mmap error = %d\n", errno);
- close (inputfd);
- exit (4);
- }
-
- search_pattern ();
-
- if (munmap (madr, filesize))
- fprintf (stderr, "munmap error = %d\n", errno);
-
- if (close (inputfd))
- fprintf (stderr, "%s: error %d closing '%s'\n",
- progname, errno, inputname);
-
- fprintf (stderr, "number of pattern matches = %d\n", num_matches);
- if (num_matches == 0)
- firstloc = ~0;
- printf ("%ld\n", firstloc);
- fprintf (stderr, "%ld\n", firstloc);
-
- exit (num_matches ? 0 : 2);
-}
-
-/* end binoffset.c */
diff --git a/scripts/extract-ikconfig b/scripts/extract-ikconfig
index de233ff..37f30d3 100755
--- a/scripts/extract-ikconfig
+++ b/scripts/extract-ikconfig
@@ -1,92 +1,53 @@
#!/bin/sh
-# extracts .config info from a [b]zImage file
-# uses: binoffset (new), dd, zcat, strings, grep
-# $arg1 is [b]zImage filename
+# ----------------------------------------------------------------------
+# extract-ikconfig - Extract the .config file from a kernel image
+#
+# This will only work when the kernel was compiled with CONFIG_IKCONFIG.
+#
+# The obscure use of the "tr" filter is to work around older versions of
+# "grep" that report the byte offset of the line instead of the pattern.
+#
+# (c) 2009, Dick Streefland <dick@streefland.net>
+# Licensed under the terms of the GNU General Public License.
+# ----------------------------------------------------------------------
-binoffset="./scripts/binoffset"
-test -e $binoffset || cc -o $binoffset ./scripts/binoffset.c || exit 1
+gz1='\037\213\010'
+gz2='01'
+cf1='IKCFG_ST\037\213\010'
+cf2='0123456789'
-IKCFG_ST="0x49 0x4b 0x43 0x46 0x47 0x5f 0x53 0x54"
-IKCFG_ED="0x49 0x4b 0x43 0x46 0x47 0x5f 0x45 0x44"
-dump_config() {
- file="$1"
-
- start=`$binoffset $file $IKCFG_ST 2>/dev/null`
- [ "$?" != "0" ] && start="-1"
- if [ "$start" -eq "-1" ]; then
- return
- fi
- end=`$binoffset $file $IKCFG_ED 2>/dev/null`
- [ "$?" != "0" ] && end="-1"
- if [ "$end" -eq "-1" ]; then
- return
- fi
-
- start=`expr $start + 8`
- size=`expr $end - $start`
-
- dd if="$file" ibs=1 skip="$start" count="$size" 2>/dev/null | zcat
-
- clean_up
- exit 0
-}
-
-
-usage()
+dump_config()
{
- echo " usage: extract-ikconfig [b]zImage_filename"
-}
-
-clean_up()
-{
- if [ "$TMPFILE" != "" ]; then
- rm -f $TMPFILE
+ if pos=`tr "$cf1\n$cf2" "\n$cf2=" < "$1" | grep -abo "^$cf2"`
+ then
+ pos=${pos%%:*}
+ tail -c+$(($pos+8)) "$1" | zcat -q
+ exit 0
fi
}
-if [ $# -lt 1 ]
+# Check invocation:
+me=${0##*/}
+img=$1
+if [ $# -ne 1 -o ! -s "$img" ]
then
- usage
- exit 1
+ echo "Usage: $me <kernel-image>" >&2
+ exit 2
fi
-TMPFILE=`mktemp -t ikconfig-XXXXXX` || exit 1
-image="$1"
+# Initial attempt for uncompressed images or objects:
+dump_config "$img"
-# vmlinux: Attempt to dump the configuration from the file directly
-dump_config "$image"
+# That didn't work, so decompress and try again:
+tmp=/tmp/ikconfig$$
+trap "rm -f $tmp" 0
+for pos in `tr "$gz1\n$gz2" "\n$gz2=" < "$img" | grep -abo "^$gz2"`
+do
+ pos=${pos%%:*}
+ tail -c+$pos "$img" | zcat 2> /dev/null > $tmp
+ dump_config $tmp
+done
-GZHDR1="0x1f 0x8b 0x08 0x00"
-GZHDR2="0x1f 0x8b 0x08 0x08"
-
-ELFHDR="0x7f 0x45 0x4c 0x46"
-
-# vmlinux.gz: Check for a compressed images
-off=`$binoffset "$image" $GZHDR1 2>/dev/null`
-[ "$?" != "0" ] && off="-1"
-if [ "$off" -eq "-1" ]; then
- off=`$binoffset "$image" $GZHDR2 2>/dev/null`
- [ "$?" != "0" ] && off="-1"
-fi
-if [ "$off" -eq "0" ]; then
- zcat <"$image" >"$TMPFILE"
- dump_config "$TMPFILE"
-elif [ "$off" -ne "-1" ]; then
- (dd ibs="$off" skip=1 count=0 && dd bs=512k) <"$image" 2>/dev/null | \
- zcat >"$TMPFILE"
- dump_config "$TMPFILE"
-
-# check if this is simply an ELF file
-else
- off=`$binoffset "$image" $ELFHDR 2>/dev/null`
- [ "$?" != "0" ] && off="-1"
- if [ "$off" -eq "0" ]; then
- dump_config "$image"
- fi
-fi
-
-echo "ERROR: Unable to extract kernel configuration information."
-echo " This kernel image may not have the config info."
-
-clean_up
+# Bail out:
+echo "$me: Cannot find kernel config." >&2
exit 1
diff --git a/scripts/kconfig/Makefile b/scripts/kconfig/Makefile
index 999e8a7..186c466 100644
--- a/scripts/kconfig/Makefile
+++ b/scripts/kconfig/Makefile
@@ -30,8 +30,17 @@
$(Q)mkdir -p include/generated
$< -s $(Kconfig)
+# if no path is given, then use src directory to find file
+ifdef LSMOD
+LSMOD_F := $(LSMOD)
+ifeq ($(findstring /,$(LSMOD)),)
+ LSMOD_F := $(objtree)/$(LSMOD)
+endif
+endif
+
localmodconfig: $(obj)/streamline_config.pl $(obj)/conf
- $(Q)perl $< $(srctree) $(Kconfig) > .tmp.config
+ $(Q)mkdir -p include/generated
+ $(Q)perl $< $(srctree) $(Kconfig) $(LSMOD_F) > .tmp.config
$(Q)if [ -f .config ]; then \
cmp -s .tmp.config .config || \
(mv -f .config .config.old.1; \
@@ -45,7 +54,8 @@
$(Q)rm -f .tmp.config
localyesconfig: $(obj)/streamline_config.pl $(obj)/conf
- $(Q)perl $< $(srctree) $(Kconfig) > .tmp.config
+ $(Q)mkdir -p include/generated
+ $(Q)perl $< $(srctree) $(Kconfig) $(LSMOD_F) > .tmp.config
$(Q)sed -i s/=m/=y/ .tmp.config
$(Q)if [ -f .config ]; then \
cmp -s .tmp.config .config || \
diff --git a/scripts/kconfig/streamline_config.pl b/scripts/kconfig/streamline_config.pl
index 0d80082..afbd54a 100644
--- a/scripts/kconfig/streamline_config.pl
+++ b/scripts/kconfig/streamline_config.pl
@@ -113,6 +113,7 @@
# Get the build source and top level Kconfig file (passed in)
my $ksource = $ARGV[0];
my $kconfig = $ARGV[1];
+my $lsmod_file = $ARGV[2];
my @makefiles = `find $ksource -name Makefile`;
my %depends;
@@ -121,6 +122,8 @@
my %objects;
my $var;
my $cont = 0;
+my $iflevel = 0;
+my @ifdeps;
# prevent recursion
my %read_kconfigs;
@@ -146,6 +149,15 @@
$state = "NEW";
$config = $1;
+ for (my $i = 0; $i < $iflevel; $i++) {
+ if ($i) {
+ $depends{$config} .= " " . $ifdeps[$i];
+ } else {
+ $depends{$config} = $ifdeps[$i];
+ }
+ $state = "DEP";
+ }
+
# collect the depends for the config
} elsif ($state eq "NEW" && /^\s*depends\s+on\s+(.*)$/) {
$state = "DEP";
@@ -166,6 +178,21 @@
# note if the config has a prompt
$prompt{$config} = 1;
+ # Check for if statements
+ } elsif (/^if\s+(.*\S)\s*$/) {
+ my $deps = $1;
+ # remove beginning and ending non text
+ $deps =~ s/^[^a-zA-Z0-9_]*//;
+ $deps =~ s/[^a-zA-Z0-9_]*$//;
+
+ my @deps = split /[^a-zA-Z0-9_]+/, $deps;
+
+ $ifdeps[$iflevel++] = join ':', @deps;
+
+ } elsif (/^endif/) {
+
+ $iflevel-- if ($iflevel);
+
# stop on "help"
} elsif (/^\s*help\s*$/) {
$state = "NONE";
@@ -237,8 +264,36 @@
my %modules;
-# see what modules are loaded on this system
-open(LIN,"/sbin/lsmod|") || die "Cant lsmod";
+if (defined($lsmod_file)) {
+ if ( ! -f $lsmod_file) {
+ die "$lsmod_file not found";
+ }
+ if ( -x $lsmod_file) {
+ # the file is executable, run it
+ open(LIN, "$lsmod_file|");
+ } else {
+ # Just read the contents
+ open(LIN, "$lsmod_file");
+ }
+} else {
+
+ # see what modules are loaded on this system
+ my $lsmod;
+
+ foreach $dir ( ("/sbin", "/bin", "/usr/sbin", "/usr/bin") ) {
+ if ( -x "$dir/lsmod" ) {
+ $lsmod = "$dir/lsmod";
+ last;
+ }
+}
+ if (!defined($lsmod)) {
+ # try just the path
+ $lsmod = "lsmod";
+ }
+
+ open(LIN,"$lsmod|") || die "Can not call lsmod with $lsmod";
+}
+
while (<LIN>) {
next if (/^Module/); # Skip the first line.
if (/^(\S+)/) {
diff --git a/security/integrity/ima/ima_iint.c b/security/integrity/ima/ima_iint.c
index 0d83edc..2d4d05d 100644
--- a/security/integrity/ima/ima_iint.c
+++ b/security/integrity/ima/ima_iint.c
@@ -63,12 +63,11 @@
spin_lock(&ima_iint_lock);
rc = radix_tree_insert(&ima_iint_store, (unsigned long)inode, iint);
spin_unlock(&ima_iint_lock);
+ radix_tree_preload_end();
out:
if (rc < 0)
kmem_cache_free(iint_cache, iint);
- radix_tree_preload_end();
-
return rc;
}
diff --git a/security/selinux/ss/ebitmap.c b/security/selinux/ss/ebitmap.c
index 68c7348..04b6145 100644
--- a/security/selinux/ss/ebitmap.c
+++ b/security/selinux/ss/ebitmap.c
@@ -128,7 +128,7 @@
cmap_idx = delta / NETLBL_CATMAP_MAPSIZE;
cmap_sft = delta % NETLBL_CATMAP_MAPSIZE;
c_iter->bitmap[cmap_idx]
- |= e_iter->maps[cmap_idx] << cmap_sft;
+ |= e_iter->maps[i] << cmap_sft;
}
e_iter = e_iter->next;
}
diff --git a/sound/aoa/fabrics/layout.c b/sound/aoa/fabrics/layout.c
index 586965f..7a437da 100644
--- a/sound/aoa/fabrics/layout.c
+++ b/sound/aoa/fabrics/layout.c
@@ -768,7 +768,7 @@
"required property %s not present\n", propname);
return -ENODEV;
}
- if (*ref != codec->node->linux_phandle) {
+ if (*ref != codec->node->phandle) {
printk(KERN_INFO "snd-aoa-fabric-layout: "
"%s doesn't match!\n", propname);
return -ENODEV;
diff --git a/sound/ppc/awacs.c b/sound/ppc/awacs.c
index 2e15646..b366793 100644
--- a/sound/ppc/awacs.c
+++ b/sound/ppc/awacs.c
@@ -751,8 +751,8 @@
static void snd_pmac_awacs_resume(struct snd_pmac *chip)
{
- if (machine_is_compatible("PowerBook3,1")
- || machine_is_compatible("PowerBook3,2")) {
+ if (of_machine_is_compatible("PowerBook3,1")
+ || of_machine_is_compatible("PowerBook3,2")) {
msleep(100);
snd_pmac_awacs_write_reg(chip, 1,
chip->awacs_reg[1] & ~MASK_PAROUT);
@@ -780,16 +780,16 @@
}
#endif /* CONFIG_PM */
-#define IS_PM7500 (machine_is_compatible("AAPL,7500") \
- || machine_is_compatible("AAPL,8500") \
- || machine_is_compatible("AAPL,9500"))
-#define IS_PM5500 (machine_is_compatible("AAPL,e411"))
-#define IS_BEIGE (machine_is_compatible("AAPL,Gossamer"))
-#define IS_IMAC1 (machine_is_compatible("PowerMac2,1"))
-#define IS_IMAC2 (machine_is_compatible("PowerMac2,2") \
- || machine_is_compatible("PowerMac4,1"))
-#define IS_G4AGP (machine_is_compatible("PowerMac3,1"))
-#define IS_LOMBARD (machine_is_compatible("PowerBook1,1"))
+#define IS_PM7500 (of_machine_is_compatible("AAPL,7500") \
+ || of_machine_is_compatible("AAPL,8500") \
+ || of_machine_is_compatible("AAPL,9500"))
+#define IS_PM5500 (of_machine_is_compatible("AAPL,e411"))
+#define IS_BEIGE (of_machine_is_compatible("AAPL,Gossamer"))
+#define IS_IMAC1 (of_machine_is_compatible("PowerMac2,1"))
+#define IS_IMAC2 (of_machine_is_compatible("PowerMac2,2") \
+ || of_machine_is_compatible("PowerMac4,1"))
+#define IS_G4AGP (of_machine_is_compatible("PowerMac3,1"))
+#define IS_LOMBARD (of_machine_is_compatible("PowerBook1,1"))
static int imac1, imac2;
diff --git a/sound/ppc/burgundy.c b/sound/ppc/burgundy.c
index 0accfe4..1f72e1c 100644
--- a/sound/ppc/burgundy.c
+++ b/sound/ppc/burgundy.c
@@ -582,7 +582,7 @@
static void snd_pmac_burgundy_update_automute(struct snd_pmac *chip, int do_notify)
{
if (chip->auto_mute) {
- int imac = machine_is_compatible("iMac");
+ int imac = of_machine_is_compatible("iMac");
int reg, oreg;
reg = oreg = snd_pmac_burgundy_rcb(chip,
MASK_ADDR_BURGUNDY_MORE_OUTPUTENABLES);
@@ -620,7 +620,7 @@
*/
int __devinit snd_pmac_burgundy_init(struct snd_pmac *chip)
{
- int imac = machine_is_compatible("iMac");
+ int imac = of_machine_is_compatible("iMac");
int i, err;
/* Checks to see the chip is alive and kicking */
diff --git a/sound/ppc/pmac.c b/sound/ppc/pmac.c
index 7bc492e..8508117 100644
--- a/sound/ppc/pmac.c
+++ b/sound/ppc/pmac.c
@@ -922,11 +922,11 @@
}
/* it seems the Pismo & iBook can't byte-swap in hardware. */
- if (machine_is_compatible("PowerBook3,1") ||
- machine_is_compatible("PowerBook2,1"))
+ if (of_machine_is_compatible("PowerBook3,1") ||
+ of_machine_is_compatible("PowerBook2,1"))
chip->can_byte_swap = 0 ;
- if (machine_is_compatible("PowerBook2,1"))
+ if (of_machine_is_compatible("PowerBook2,1"))
chip->can_duplex = 0;
}
@@ -959,11 +959,11 @@
chip->control_mask = MASK_IEPC | MASK_IEE | 0x11; /* default */
/* check machine type */
- if (machine_is_compatible("AAPL,3400/2400")
- || machine_is_compatible("AAPL,3500"))
+ if (of_machine_is_compatible("AAPL,3400/2400")
+ || of_machine_is_compatible("AAPL,3500"))
chip->is_pbook_3400 = 1;
- else if (machine_is_compatible("PowerBook1,1")
- || machine_is_compatible("AAPL,PowerBook1998"))
+ else if (of_machine_is_compatible("PowerBook1,1")
+ || of_machine_is_compatible("AAPL,PowerBook1998"))
chip->is_pbook_G3 = 1;
chip->node = of_find_node_by_name(NULL, "awacs");
sound = of_node_get(chip->node);
@@ -1033,8 +1033,8 @@
}
if (of_device_is_compatible(sound, "tumbler")) {
chip->model = PMAC_TUMBLER;
- chip->can_capture = machine_is_compatible("PowerMac4,2")
- || machine_is_compatible("PowerBook4,1");
+ chip->can_capture = of_machine_is_compatible("PowerMac4,2")
+ || of_machine_is_compatible("PowerBook4,1");
chip->can_duplex = 0;
// chip->can_byte_swap = 0; /* FIXME: check this */
chip->num_freqs = ARRAY_SIZE(tumbler_freqs);
diff --git a/sound/soc/fsl/efika-audio-fabric.c b/sound/soc/fsl/efika-audio-fabric.c
index 3326e2a..1a5b8e0 100644
--- a/sound/soc/fsl/efika-audio-fabric.c
+++ b/sound/soc/fsl/efika-audio-fabric.c
@@ -55,7 +55,7 @@
struct platform_device *pdev;
int rc;
- if (!machine_is_compatible("bplan,efika"))
+ if (!of_machine_is_compatible("bplan,efika"))
return -ENODEV;
card.platform = &mpc5200_audio_dma_platform;
diff --git a/sound/soc/fsl/pcm030-audio-fabric.c b/sound/soc/fsl/pcm030-audio-fabric.c
index b928ef7..6644cba 100644
--- a/sound/soc/fsl/pcm030-audio-fabric.c
+++ b/sound/soc/fsl/pcm030-audio-fabric.c
@@ -55,7 +55,7 @@
struct platform_device *pdev;
int rc;
- if (!machine_is_compatible("phytec,pcm030"))
+ if (!of_machine_is_compatible("phytec,pcm030"))
return -ENODEV;
card.platform = &mpc5200_audio_dma_platform;