sh_eth: add device tree support
Add support of the device tree probing for the Renesas SH-Mobile SoCs
documenting the device tree binding as necessary.
This work is loosely based on the original patch by Nobuhiro Iwamatsu
<nobuhiro.iwamatsu.yj@renesas.com>.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c
index 88b40b5..b1e6554 100644
--- a/drivers/net/ethernet/renesas/sh_eth.c
+++ b/drivers/net/ethernet/renesas/sh_eth.c
@@ -1,8 +1,8 @@
/* SuperH Ethernet device driver
*
* Copyright (C) 2006-2012 Nobuhiro Iwamatsu
- * Copyright (C) 2008-2013 Renesas Solutions Corp.
- * Copyright (C) 2013 Cogent Embedded, Inc.
+ * Copyright (C) 2008-2014 Renesas Solutions Corp.
+ * Copyright (C) 2013-2014 Cogent Embedded, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
@@ -27,6 +27,10 @@
#include <linux/platform_device.h>
#include <linux/mdio-bitbang.h>
#include <linux/netdevice.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
+#include <linux/of_net.h>
#include <linux/phy.h>
#include <linux/cache.h>
#include <linux/io.h>
@@ -2710,6 +2714,54 @@
.ndo_change_mtu = eth_change_mtu,
};
+#ifdef CONFIG_OF
+static struct sh_eth_plat_data *sh_eth_parse_dt(struct device *dev)
+{
+ struct device_node *np = dev->of_node;
+ struct sh_eth_plat_data *pdata;
+ struct device_node *phy;
+ const char *mac_addr;
+
+ pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return NULL;
+
+ pdata->phy_interface = of_get_phy_mode(np);
+
+ phy = of_parse_phandle(np, "phy-handle", 0);
+ if (of_property_read_u32(phy, "reg", &pdata->phy))
+ return NULL;
+ pdata->phy_irq = irq_of_parse_and_map(phy, 0);
+
+ mac_addr = of_get_mac_address(np);
+ if (mac_addr)
+ memcpy(pdata->mac_addr, mac_addr, ETH_ALEN);
+
+ pdata->no_ether_link =
+ of_property_read_bool(np, "renesas,no-ether-link");
+ pdata->ether_link_active_low =
+ of_property_read_bool(np, "renesas,ether-link-active-low");
+
+ return pdata;
+}
+
+static const struct of_device_id sh_eth_match_table[] = {
+ { .compatible = "renesas,gether-r8a7740", .data = &r8a7740_data },
+ { .compatible = "renesas,ether-r8a7778", .data = &r8a777x_data },
+ { .compatible = "renesas,ether-r8a7779", .data = &r8a777x_data },
+ { .compatible = "renesas,ether-r8a7790", .data = &r8a779x_data },
+ { .compatible = "renesas,ether-r8a7791", .data = &r8a779x_data },
+ { .compatible = "renesas,ether-r7s72100", .data = &r7s72100_data },
+ { }
+};
+MODULE_DEVICE_TABLE(of, sh_eth_match_table);
+#else
+static inline struct sh_eth_plat_data *sh_eth_parse_dt(struct device *dev)
+{
+ return NULL;
+}
+#endif
+
static int sh_eth_drv_probe(struct platform_device *pdev)
{
int ret, devno = 0;
@@ -2763,6 +2815,8 @@
pm_runtime_enable(&pdev->dev);
pm_runtime_resume(&pdev->dev);
+ if (pdev->dev.of_node)
+ pd = sh_eth_parse_dt(&pdev->dev);
if (!pd) {
dev_err(&pdev->dev, "no platform data\n");
ret = -EINVAL;
@@ -2778,7 +2832,15 @@
mdp->ether_link_active_low = pd->ether_link_active_low;
/* set cpu data */
- mdp->cd = (struct sh_eth_cpu_data *)id->driver_data;
+ if (id) {
+ mdp->cd = (struct sh_eth_cpu_data *)id->driver_data;
+ } else {
+ const struct of_device_id *match;
+
+ match = of_match_device(of_match_ptr(sh_eth_match_table),
+ &pdev->dev);
+ mdp->cd = (struct sh_eth_cpu_data *)match->data;
+ }
mdp->reg_offset = sh_eth_get_register_offset(mdp->cd->register_type);
sh_eth_set_default_cpu_data(mdp->cd);
@@ -2920,6 +2982,7 @@
.driver = {
.name = CARDNAME,
.pm = SH_ETH_PM_OPS,
+ .of_match_table = of_match_ptr(sh_eth_match_table),
},
};