ixgbe: Implement support for firmware-controlled PHYs
Implement support for devices that have firmware-controlled PHYs.
Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
index 8789f21..1758906 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
@@ -197,15 +197,17 @@ static int ixgbe_get_settings(struct net_device *netdev,
SUPPORTED_1000baseKX_Full :
SUPPORTED_1000baseT_Full;
if (supported_link & IXGBE_LINK_SPEED_100_FULL)
- ecmd->supported |= ixgbe_isbackplane(hw->phy.media_type) ?
- SUPPORTED_1000baseKX_Full :
- SUPPORTED_100baseT_Full;
+ ecmd->supported |= SUPPORTED_100baseT_Full;
+ if (supported_link & IXGBE_LINK_SPEED_10_FULL)
+ ecmd->supported |= SUPPORTED_10baseT_Full;
/* default advertised speed if phy.autoneg_advertised isn't set */
ecmd->advertising = ecmd->supported;
/* set the advertised speeds */
if (hw->phy.autoneg_advertised) {
ecmd->advertising = 0;
+ if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_10_FULL)
+ ecmd->advertising |= ADVERTISED_10baseT_Full;
if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_100_FULL)
ecmd->advertising |= ADVERTISED_100baseT_Full;
if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_10GB_FULL)
@@ -237,6 +239,7 @@ static int ixgbe_get_settings(struct net_device *netdev,
case ixgbe_phy_tn:
case ixgbe_phy_aq:
case ixgbe_phy_x550em_ext_t:
+ case ixgbe_phy_fw:
case ixgbe_phy_cu_unknown:
ecmd->supported |= SUPPORTED_TP;
ecmd->advertising |= ADVERTISED_TP;
@@ -346,6 +349,9 @@ static int ixgbe_get_settings(struct net_device *netdev,
case IXGBE_LINK_SPEED_100_FULL:
ethtool_cmd_speed_set(ecmd, SPEED_100);
break;
+ case IXGBE_LINK_SPEED_10_FULL:
+ ethtool_cmd_speed_set(ecmd, SPEED_10);
+ break;
default:
break;
}
@@ -394,6 +400,9 @@ static int ixgbe_set_settings(struct net_device *netdev,
if (ecmd->advertising & ADVERTISED_100baseT_Full)
advertised |= IXGBE_LINK_SPEED_100_FULL;
+ if (ecmd->advertising & ADVERTISED_10baseT_Full)
+ advertised |= IXGBE_LINK_SPEED_10_FULL;
+
if (old == advertised)
return err;
/* this sets the link speed and restarts auto-neg */
@@ -3173,6 +3182,9 @@ static int ixgbe_get_module_info(struct net_device *dev,
u8 sff8472_rev, addr_mode;
bool page_swap = false;
+ if (hw->phy.type == ixgbe_phy_fw)
+ return -ENXIO;
+
/* Check whether we support SFF-8472 or not */
status = hw->phy.ops.read_i2c_eeprom(hw,
IXGBE_SFF_SFF_8472_COMP,
@@ -3218,6 +3230,9 @@ static int ixgbe_get_module_eeprom(struct net_device *dev,
if (ee->len == 0)
return -EINVAL;
+ if (hw->phy.type == ixgbe_phy_fw)
+ return -ENXIO;
+
for (i = ee->offset; i < ee->offset + ee->len; i++) {
/* I2C reads can take long time */
if (test_bit(__IXGBE_IN_SFP_INIT, &adapter->state))
@@ -3237,6 +3252,136 @@ static int ixgbe_get_module_eeprom(struct net_device *dev,
return 0;
}
+static const struct {
+ ixgbe_link_speed mac_speed;
+ u32 supported;
+} ixgbe_ls_map[] = {
+ { IXGBE_LINK_SPEED_10_FULL, SUPPORTED_10baseT_Full },
+ { IXGBE_LINK_SPEED_100_FULL, SUPPORTED_100baseT_Full },
+ { IXGBE_LINK_SPEED_1GB_FULL, SUPPORTED_1000baseT_Full },
+ { IXGBE_LINK_SPEED_2_5GB_FULL, SUPPORTED_2500baseX_Full },
+ { IXGBE_LINK_SPEED_10GB_FULL, SUPPORTED_10000baseT_Full },
+};
+
+static const struct {
+ u32 lp_advertised;
+ u32 mac_speed;
+} ixgbe_lp_map[] = {
+ { FW_PHY_ACT_UD_2_100M_TX_EEE, SUPPORTED_100baseT_Full },
+ { FW_PHY_ACT_UD_2_1G_T_EEE, SUPPORTED_1000baseT_Full },
+ { FW_PHY_ACT_UD_2_10G_T_EEE, SUPPORTED_10000baseT_Full },
+ { FW_PHY_ACT_UD_2_1G_KX_EEE, SUPPORTED_1000baseKX_Full },
+ { FW_PHY_ACT_UD_2_10G_KX4_EEE, SUPPORTED_10000baseKX4_Full },
+ { FW_PHY_ACT_UD_2_10G_KR_EEE, SUPPORTED_10000baseKR_Full},
+};
+
+static int
+ixgbe_get_eee_fw(struct ixgbe_adapter *adapter, struct ethtool_eee *edata)
+{
+ u32 info[FW_PHY_ACT_DATA_COUNT] = { 0 };
+ struct ixgbe_hw *hw = &adapter->hw;
+ s32 rc;
+ u16 i;
+
+ rc = ixgbe_fw_phy_activity(hw, FW_PHY_ACT_UD_2, &info);
+ if (rc)
+ return rc;
+
+ edata->lp_advertised = 0;
+ for (i = 0; i < ARRAY_SIZE(ixgbe_lp_map); ++i) {
+ if (info[0] & ixgbe_lp_map[i].lp_advertised)
+ edata->lp_advertised |= ixgbe_lp_map[i].mac_speed;
+ }
+
+ edata->supported = 0;
+ for (i = 0; i < ARRAY_SIZE(ixgbe_ls_map); ++i) {
+ if (hw->phy.eee_speeds_supported & ixgbe_ls_map[i].mac_speed)
+ edata->supported |= ixgbe_ls_map[i].supported;
+ }
+
+ edata->advertised = 0;
+ for (i = 0; i < ARRAY_SIZE(ixgbe_ls_map); ++i) {
+ if (hw->phy.eee_speeds_advertised & ixgbe_ls_map[i].mac_speed)
+ edata->advertised |= ixgbe_ls_map[i].supported;
+ }
+
+ edata->eee_enabled = !!edata->advertised;
+ edata->tx_lpi_enabled = edata->eee_enabled;
+ if (edata->advertised & edata->lp_advertised)
+ edata->eee_active = true;
+
+ return 0;
+}
+
+static int ixgbe_get_eee(struct net_device *netdev, struct ethtool_eee *edata)
+{
+ struct ixgbe_adapter *adapter = netdev_priv(netdev);
+ struct ixgbe_hw *hw = &adapter->hw;
+
+ if (!(adapter->flags2 & IXGBE_FLAG2_EEE_CAPABLE))
+ return -EOPNOTSUPP;
+
+ if (hw->phy.eee_speeds_supported && hw->phy.type == ixgbe_phy_fw)
+ return ixgbe_get_eee_fw(adapter, edata);
+
+ return -EOPNOTSUPP;
+}
+
+static int ixgbe_set_eee(struct net_device *netdev, struct ethtool_eee *edata)
+{
+ struct ixgbe_adapter *adapter = netdev_priv(netdev);
+ struct ixgbe_hw *hw = &adapter->hw;
+ struct ethtool_eee eee_data;
+ s32 ret_val;
+
+ if (!(adapter->flags2 & IXGBE_FLAG2_EEE_CAPABLE))
+ return -EOPNOTSUPP;
+
+ memset(&eee_data, 0, sizeof(struct ethtool_eee));
+
+ ret_val = ixgbe_get_eee(netdev, &eee_data);
+ if (ret_val)
+ return ret_val;
+
+ if (eee_data.eee_enabled && !edata->eee_enabled) {
+ if (eee_data.tx_lpi_enabled != edata->tx_lpi_enabled) {
+ e_err(drv, "Setting EEE tx-lpi is not supported\n");
+ return -EINVAL;
+ }
+
+ if (eee_data.tx_lpi_timer != edata->tx_lpi_timer) {
+ e_err(drv,
+ "Setting EEE Tx LPI timer is not supported\n");
+ return -EINVAL;
+ }
+
+ if (eee_data.advertised != edata->advertised) {
+ e_err(drv,
+ "Setting EEE advertised speeds is not supported\n");
+ return -EINVAL;
+ }
+ }
+
+ if (eee_data.eee_enabled != edata->eee_enabled) {
+ if (edata->eee_enabled) {
+ adapter->flags2 |= IXGBE_FLAG2_EEE_ENABLED;
+ hw->phy.eee_speeds_advertised =
+ hw->phy.eee_speeds_supported;
+ } else {
+ adapter->flags2 &= ~IXGBE_FLAG2_EEE_ENABLED;
+ hw->phy.eee_speeds_advertised = 0;
+ }
+
+ /* reset link */
+ if (netif_running(netdev))
+ ixgbe_reinit_locked(adapter);
+ else
+ ixgbe_reset(adapter);
+ }
+
+ return 0;
+}
+
static const struct ethtool_ops ixgbe_ethtool_ops = {
.get_settings = ixgbe_get_settings,
.set_settings = ixgbe_set_settings,
@@ -3269,6 +3414,8 @@ static const struct ethtool_ops ixgbe_ethtool_ops = {
.get_rxfh_key_size = ixgbe_get_rxfh_key_size,
.get_rxfh = ixgbe_get_rxfh,
.set_rxfh = ixgbe_set_rxfh,
+ .get_eee = ixgbe_get_eee,
+ .set_eee = ixgbe_set_eee,
.get_channels = ixgbe_get_channels,
.set_channels = ixgbe_set_channels,
.get_ts_info = ixgbe_get_ts_info,