atiixp/cs5535/scc_pata: fix "idex=ata66" parameter handling
Don't override the cable type if the "idex=ata66" parameter was used.
While at it:
* atiixp.c: factor out cable detection to atiixp_cable_detect() from
init_hwif_atiixp().
* cs5535.c: pass 'ide_hwif_t *hwif' instead of 'struct pci_dev *dev' to
cs5535_cable_detect().
* scc_pata.c: factor out cable detection to scc_cable_detect() from
init_hwif_scc() and remove incorrect comment.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
diff --git a/drivers/ide/pci/atiixp.c b/drivers/ide/pci/atiixp.c
index b56274a..648fdf3 100644
--- a/drivers/ide/pci/atiixp.c
+++ b/drivers/ide/pci/atiixp.c
@@ -121,6 +121,19 @@
spin_unlock_irqrestore(&atiixp_lock, flags);
}
+static u8 __devinit atiixp_cable_detect(ide_hwif_t *hwif)
+{
+ struct pci_dev *pdev = to_pci_dev(hwif->dev);
+ u8 udma_mode = 0, ch = hwif->channel;
+
+ pci_read_config_byte(pdev, ATIIXP_IDE_UDMA_MODE + ch, &udma_mode);
+
+ if ((udma_mode & 0x07) >= 0x04 || (udma_mode & 0x70) >= 0x40)
+ return ATA_CBL_PATA80;
+ else
+ return ATA_CBL_PATA40;
+}
+
/**
* init_hwif_atiixp - fill in the hwif for the ATIIXP
* @hwif: IDE interface
@@ -131,21 +144,14 @@
static void __devinit init_hwif_atiixp(ide_hwif_t *hwif)
{
- struct pci_dev *pdev = to_pci_dev(hwif->dev);
- u8 udma_mode = 0, ch = hwif->channel;
-
hwif->set_pio_mode = &atiixp_set_pio_mode;
hwif->set_dma_mode = &atiixp_set_dma_mode;
if (!hwif->dma_base)
return;
- pci_read_config_byte(pdev, ATIIXP_IDE_UDMA_MODE + ch, &udma_mode);
-
- if ((udma_mode & 0x07) >= 0x04 || (udma_mode & 0x70) >= 0x40)
- hwif->cbl = ATA_CBL_PATA80;
- else
- hwif->cbl = ATA_CBL_PATA40;
+ if (hwif->cbl != ATA_CBL_PATA40_SHORT)
+ hwif->cbl = atiixp_cable_detect(hwif);
}
static const struct ide_port_info atiixp_pci_info[] __devinitdata = {