[POWERPC] CPM: Rename commproc to cpm1 and cpm2_common.c to cpm2.c
Rename commproc.[ch] to cpm1.[ch] to be more consistent with cpm2. Also
rename cpm2_common.c to cpm2.c as suggested by Scott Wood. Adjust the
includes accordingly.
Signed-off-by: Jochen Friedrich <jochen@scram.de>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
diff --git a/arch/powerpc/sysdev/cpm2.c b/arch/powerpc/sysdev/cpm2.c
new file mode 100644
index 0000000..7be7112
--- /dev/null
+++ b/arch/powerpc/sysdev/cpm2.c
@@ -0,0 +1,469 @@
+/*
+ * General Purpose functions for the global management of the
+ * 8260 Communication Processor Module.
+ * Copyright (c) 1999-2001 Dan Malek <dan@embeddedalley.com>
+ * Copyright (c) 2000 MontaVista Software, Inc (source@mvista.com)
+ * 2.3.99 Updates
+ *
+ * 2006 (c) MontaVista Software, Inc.
+ * Vitaly Bordug <vbordug@ru.mvista.com>
+ * Merged to arch/powerpc from arch/ppc/syslib/cpm2_common.c
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/*
+ *
+ * In addition to the individual control of the communication
+ * channels, there are a few functions that globally affect the
+ * communication processor.
+ *
+ * Buffer descriptors must be allocated from the dual ported memory
+ * space. The allocator for that is here. When the communication
+ * process is reset, we reclaim the memory available. There is
+ * currently no deallocator for this memory.
+ */
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mpc8260.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/cpm2.h>
+#include <asm/rheap.h>
+#include <asm/fs_pd.h>
+
+#include <sysdev/fsl_soc.h>
+
+#ifndef CONFIG_PPC_CPM_NEW_BINDING
+static void cpm2_dpinit(void);
+#endif
+
+cpm_cpm2_t __iomem *cpmp; /* Pointer to comm processor space */
+
+/* We allocate this here because it is used almost exclusively for
+ * the communication processor devices.
+ */
+cpm2_map_t __iomem *cpm2_immr;
+
+#define CPM_MAP_SIZE (0x40000) /* 256k - the PQ3 reserve this amount
+ of space for CPM as it is larger
+ than on PQ2 */
+
+void __init cpm2_reset(void)
+{
+#ifdef CONFIG_PPC_85xx
+ cpm2_immr = ioremap(CPM_MAP_ADDR, CPM_MAP_SIZE);
+#else
+ cpm2_immr = ioremap(get_immrbase(), CPM_MAP_SIZE);
+#endif
+
+ /* Reclaim the DP memory for our use.
+ */
+#ifdef CONFIG_PPC_CPM_NEW_BINDING
+ cpm_muram_init();
+#else
+ cpm2_dpinit();
+#endif
+
+ /* Tell everyone where the comm processor resides.
+ */
+ cpmp = &cpm2_immr->im_cpm;
+}
+
+static DEFINE_SPINLOCK(cmd_lock);
+
+#define MAX_CR_CMD_LOOPS 10000
+
+int cpm_command(u32 command, u8 opcode)
+{
+ int i, ret;
+ unsigned long flags;
+
+ spin_lock_irqsave(&cmd_lock, flags);
+
+ ret = 0;
+ out_be32(&cpmp->cp_cpcr, command | opcode | CPM_CR_FLG);
+ for (i = 0; i < MAX_CR_CMD_LOOPS; i++)
+ if ((in_be32(&cpmp->cp_cpcr) & CPM_CR_FLG) == 0)
+ goto out;
+
+ printk(KERN_ERR "%s(): Not able to issue CPM command\n", __FUNCTION__);
+ ret = -EIO;
+out:
+ spin_unlock_irqrestore(&cmd_lock, flags);
+ return ret;
+}
+EXPORT_SYMBOL(cpm_command);
+
+/* Set a baud rate generator. This needs lots of work. There are
+ * eight BRGs, which can be connected to the CPM channels or output
+ * as clocks. The BRGs are in two different block of internal
+ * memory mapped space.
+ * The baud rate clock is the system clock divided by something.
+ * It was set up long ago during the initial boot phase and is
+ * is given to us.
+ * Baud rate clocks are zero-based in the driver code (as that maps
+ * to port numbers). Documentation uses 1-based numbering.
+ */
+#define BRG_INT_CLK (get_brgfreq())
+#define BRG_UART_CLK (BRG_INT_CLK/16)
+
+/* This function is used by UARTS, or anything else that uses a 16x
+ * oversampled clock.
+ */
+void
+cpm_setbrg(uint brg, uint rate)
+{
+ u32 __iomem *bp;
+
+ /* This is good enough to get SMCs running.....
+ */
+ if (brg < 4) {
+ bp = cpm2_map_size(im_brgc1, 16);
+ } else {
+ bp = cpm2_map_size(im_brgc5, 16);
+ brg -= 4;
+ }
+ bp += brg;
+ out_be32(bp, (((BRG_UART_CLK / rate) - 1) << 1) | CPM_BRG_EN);
+
+ cpm2_unmap(bp);
+}
+
+/* This function is used to set high speed synchronous baud rate
+ * clocks.
+ */
+void
+cpm2_fastbrg(uint brg, uint rate, int div16)
+{
+ u32 __iomem *bp;
+ u32 val;
+
+ if (brg < 4) {
+ bp = cpm2_map_size(im_brgc1, 16);
+ } else {
+ bp = cpm2_map_size(im_brgc5, 16);
+ brg -= 4;
+ }
+ bp += brg;
+ val = ((BRG_INT_CLK / rate) << 1) | CPM_BRG_EN;
+ if (div16)
+ val |= CPM_BRG_DIV16;
+
+ out_be32(bp, val);
+ cpm2_unmap(bp);
+}
+
+int cpm2_clk_setup(enum cpm_clk_target target, int clock, int mode)
+{
+ int ret = 0;
+ int shift;
+ int i, bits = 0;
+ cpmux_t __iomem *im_cpmux;
+ u32 __iomem *reg;
+ u32 mask = 7;
+
+ u8 clk_map[][3] = {
+ {CPM_CLK_FCC1, CPM_BRG5, 0},
+ {CPM_CLK_FCC1, CPM_BRG6, 1},
+ {CPM_CLK_FCC1, CPM_BRG7, 2},
+ {CPM_CLK_FCC1, CPM_BRG8, 3},
+ {CPM_CLK_FCC1, CPM_CLK9, 4},
+ {CPM_CLK_FCC1, CPM_CLK10, 5},
+ {CPM_CLK_FCC1, CPM_CLK11, 6},
+ {CPM_CLK_FCC1, CPM_CLK12, 7},
+ {CPM_CLK_FCC2, CPM_BRG5, 0},
+ {CPM_CLK_FCC2, CPM_BRG6, 1},
+ {CPM_CLK_FCC2, CPM_BRG7, 2},
+ {CPM_CLK_FCC2, CPM_BRG8, 3},
+ {CPM_CLK_FCC2, CPM_CLK13, 4},
+ {CPM_CLK_FCC2, CPM_CLK14, 5},
+ {CPM_CLK_FCC2, CPM_CLK15, 6},
+ {CPM_CLK_FCC2, CPM_CLK16, 7},
+ {CPM_CLK_FCC3, CPM_BRG5, 0},
+ {CPM_CLK_FCC3, CPM_BRG6, 1},
+ {CPM_CLK_FCC3, CPM_BRG7, 2},
+ {CPM_CLK_FCC3, CPM_BRG8, 3},
+ {CPM_CLK_FCC3, CPM_CLK13, 4},
+ {CPM_CLK_FCC3, CPM_CLK14, 5},
+ {CPM_CLK_FCC3, CPM_CLK15, 6},
+ {CPM_CLK_FCC3, CPM_CLK16, 7},
+ {CPM_CLK_SCC1, CPM_BRG1, 0},
+ {CPM_CLK_SCC1, CPM_BRG2, 1},
+ {CPM_CLK_SCC1, CPM_BRG3, 2},
+ {CPM_CLK_SCC1, CPM_BRG4, 3},
+ {CPM_CLK_SCC1, CPM_CLK11, 4},
+ {CPM_CLK_SCC1, CPM_CLK12, 5},
+ {CPM_CLK_SCC1, CPM_CLK3, 6},
+ {CPM_CLK_SCC1, CPM_CLK4, 7},
+ {CPM_CLK_SCC2, CPM_BRG1, 0},
+ {CPM_CLK_SCC2, CPM_BRG2, 1},
+ {CPM_CLK_SCC2, CPM_BRG3, 2},
+ {CPM_CLK_SCC2, CPM_BRG4, 3},
+ {CPM_CLK_SCC2, CPM_CLK11, 4},
+ {CPM_CLK_SCC2, CPM_CLK12, 5},
+ {CPM_CLK_SCC2, CPM_CLK3, 6},
+ {CPM_CLK_SCC2, CPM_CLK4, 7},
+ {CPM_CLK_SCC3, CPM_BRG1, 0},
+ {CPM_CLK_SCC3, CPM_BRG2, 1},
+ {CPM_CLK_SCC3, CPM_BRG3, 2},
+ {CPM_CLK_SCC3, CPM_BRG4, 3},
+ {CPM_CLK_SCC3, CPM_CLK5, 4},
+ {CPM_CLK_SCC3, CPM_CLK6, 5},
+ {CPM_CLK_SCC3, CPM_CLK7, 6},
+ {CPM_CLK_SCC3, CPM_CLK8, 7},
+ {CPM_CLK_SCC4, CPM_BRG1, 0},
+ {CPM_CLK_SCC4, CPM_BRG2, 1},
+ {CPM_CLK_SCC4, CPM_BRG3, 2},
+ {CPM_CLK_SCC4, CPM_BRG4, 3},
+ {CPM_CLK_SCC4, CPM_CLK5, 4},
+ {CPM_CLK_SCC4, CPM_CLK6, 5},
+ {CPM_CLK_SCC4, CPM_CLK7, 6},
+ {CPM_CLK_SCC4, CPM_CLK8, 7},
+ };
+
+ im_cpmux = cpm2_map(im_cpmux);
+
+ switch (target) {
+ case CPM_CLK_SCC1:
+ reg = &im_cpmux->cmx_scr;
+ shift = 24;
+ case CPM_CLK_SCC2:
+ reg = &im_cpmux->cmx_scr;
+ shift = 16;
+ break;
+ case CPM_CLK_SCC3:
+ reg = &im_cpmux->cmx_scr;
+ shift = 8;
+ break;
+ case CPM_CLK_SCC4:
+ reg = &im_cpmux->cmx_scr;
+ shift = 0;
+ break;
+ case CPM_CLK_FCC1:
+ reg = &im_cpmux->cmx_fcr;
+ shift = 24;
+ break;
+ case CPM_CLK_FCC2:
+ reg = &im_cpmux->cmx_fcr;
+ shift = 16;
+ break;
+ case CPM_CLK_FCC3:
+ reg = &im_cpmux->cmx_fcr;
+ shift = 8;
+ break;
+ default:
+ printk(KERN_ERR "cpm2_clock_setup: invalid clock target\n");
+ return -EINVAL;
+ }
+
+ if (mode == CPM_CLK_RX)
+ shift += 3;
+
+ for (i = 0; i < ARRAY_SIZE(clk_map); i++) {
+ if (clk_map[i][0] == target && clk_map[i][1] == clock) {
+ bits = clk_map[i][2];
+ break;
+ }
+ }
+ if (i == ARRAY_SIZE(clk_map))
+ ret = -EINVAL;
+
+ bits <<= shift;
+ mask <<= shift;
+
+ out_be32(reg, (in_be32(reg) & ~mask) | bits);
+
+ cpm2_unmap(im_cpmux);
+ return ret;
+}
+
+int cpm2_smc_clk_setup(enum cpm_clk_target target, int clock)
+{
+ int ret = 0;
+ int shift;
+ int i, bits = 0;
+ cpmux_t __iomem *im_cpmux;
+ u8 __iomem *reg;
+ u8 mask = 3;
+
+ u8 clk_map[][3] = {
+ {CPM_CLK_SMC1, CPM_BRG1, 0},
+ {CPM_CLK_SMC1, CPM_BRG7, 1},
+ {CPM_CLK_SMC1, CPM_CLK7, 2},
+ {CPM_CLK_SMC1, CPM_CLK9, 3},
+ {CPM_CLK_SMC2, CPM_BRG2, 0},
+ {CPM_CLK_SMC2, CPM_BRG8, 1},
+ {CPM_CLK_SMC2, CPM_CLK4, 2},
+ {CPM_CLK_SMC2, CPM_CLK15, 3},
+ };
+
+ im_cpmux = cpm2_map(im_cpmux);
+
+ switch (target) {
+ case CPM_CLK_SMC1:
+ reg = &im_cpmux->cmx_smr;
+ mask = 3;
+ shift = 4;
+ break;
+ case CPM_CLK_SMC2:
+ reg = &im_cpmux->cmx_smr;
+ mask = 3;
+ shift = 0;
+ break;
+ default:
+ printk(KERN_ERR "cpm2_smc_clock_setup: invalid clock target\n");
+ return -EINVAL;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(clk_map); i++) {
+ if (clk_map[i][0] == target && clk_map[i][1] == clock) {
+ bits = clk_map[i][2];
+ break;
+ }
+ }
+ if (i == ARRAY_SIZE(clk_map))
+ ret = -EINVAL;
+
+ bits <<= shift;
+ mask <<= shift;
+
+ out_8(reg, (in_8(reg) & ~mask) | bits);
+
+ cpm2_unmap(im_cpmux);
+ return ret;
+}
+
+#ifndef CONFIG_PPC_CPM_NEW_BINDING
+/*
+ * dpalloc / dpfree bits.
+ */
+static spinlock_t cpm_dpmem_lock;
+/* 16 blocks should be enough to satisfy all requests
+ * until the memory subsystem goes up... */
+static rh_block_t cpm_boot_dpmem_rh_block[16];
+static rh_info_t cpm_dpmem_info;
+static u8 __iomem *im_dprambase;
+
+static void cpm2_dpinit(void)
+{
+ spin_lock_init(&cpm_dpmem_lock);
+
+ /* initialize the info header */
+ rh_init(&cpm_dpmem_info, 1,
+ sizeof(cpm_boot_dpmem_rh_block) /
+ sizeof(cpm_boot_dpmem_rh_block[0]),
+ cpm_boot_dpmem_rh_block);
+
+ im_dprambase = cpm2_immr;
+
+ /* Attach the usable dpmem area */
+ /* XXX: This is actually crap. CPM_DATAONLY_BASE and
+ * CPM_DATAONLY_SIZE is only a subset of the available dpram. It
+ * varies with the processor and the microcode patches activated.
+ * But the following should be at least safe.
+ */
+ rh_attach_region(&cpm_dpmem_info, CPM_DATAONLY_BASE, CPM_DATAONLY_SIZE);
+}
+
+/* This function returns an index into the DPRAM area.
+ */
+unsigned long cpm_dpalloc(uint size, uint align)
+{
+ unsigned long start;
+ unsigned long flags;
+
+ spin_lock_irqsave(&cpm_dpmem_lock, flags);
+ cpm_dpmem_info.alignment = align;
+ start = rh_alloc(&cpm_dpmem_info, size, "commproc");
+ spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
+
+ return (uint)start;
+}
+EXPORT_SYMBOL(cpm_dpalloc);
+
+int cpm_dpfree(unsigned long offset)
+{
+ int ret;
+ unsigned long flags;
+
+ spin_lock_irqsave(&cpm_dpmem_lock, flags);
+ ret = rh_free(&cpm_dpmem_info, offset);
+ spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL(cpm_dpfree);
+
+/* not sure if this is ever needed */
+unsigned long cpm_dpalloc_fixed(unsigned long offset, uint size, uint align)
+{
+ unsigned long start;
+ unsigned long flags;
+
+ spin_lock_irqsave(&cpm_dpmem_lock, flags);
+ cpm_dpmem_info.alignment = align;
+ start = rh_alloc_fixed(&cpm_dpmem_info, offset, size, "commproc");
+ spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
+
+ return start;
+}
+EXPORT_SYMBOL(cpm_dpalloc_fixed);
+
+void cpm_dpdump(void)
+{
+ rh_dump(&cpm_dpmem_info);
+}
+EXPORT_SYMBOL(cpm_dpdump);
+
+void *cpm_dpram_addr(unsigned long offset)
+{
+ return (void *)(im_dprambase + offset);
+}
+EXPORT_SYMBOL(cpm_dpram_addr);
+#endif /* !CONFIG_PPC_CPM_NEW_BINDING */
+
+struct cpm2_ioports {
+ u32 dir, par, sor, odr, dat;
+ u32 res[3];
+};
+
+void cpm2_set_pin(int port, int pin, int flags)
+{
+ struct cpm2_ioports __iomem *iop =
+ (struct cpm2_ioports __iomem *)&cpm2_immr->im_ioport;
+
+ pin = 1 << (31 - pin);
+
+ if (flags & CPM_PIN_OUTPUT)
+ setbits32(&iop[port].dir, pin);
+ else
+ clrbits32(&iop[port].dir, pin);
+
+ if (!(flags & CPM_PIN_GPIO))
+ setbits32(&iop[port].par, pin);
+ else
+ clrbits32(&iop[port].par, pin);
+
+ if (flags & CPM_PIN_SECONDARY)
+ setbits32(&iop[port].sor, pin);
+ else
+ clrbits32(&iop[port].sor, pin);
+
+ if (flags & CPM_PIN_OPENDRAIN)
+ setbits32(&iop[port].odr, pin);
+ else
+ clrbits32(&iop[port].odr, pin);
+}