Merge branch 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
amd64-agp: fix crash at second module load
drm/radeon: fix regression with AA resolve checking
drm: drop commented out code and preceding comment
drm/vblank: Enable precise vblank timestamps for interlaced and doublescan modes.
drm/vblank: Use memory barriers optimized for atomic_t instead of generics.
drm/vblank: Use abs64(diff_ns) for s64 diff_ns instead of abs(diff_ns)
drm/radeon/kms: align height of fb allocation.
Revert "drm/radeon/kms: switch back to min->max pll post divider iteration"
diff --git a/arch/arm/mach-tegra/include/mach/kbc.h b/arch/arm/mach-tegra/include/mach/kbc.h
index 66ad276..04c7798 100644
--- a/arch/arm/mach-tegra/include/mach/kbc.h
+++ b/arch/arm/mach-tegra/include/mach/kbc.h
@@ -57,5 +57,6 @@
const struct matrix_keymap_data *keymap_data;
bool wakeup;
+ bool use_fn_map;
};
#endif
diff --git a/arch/cris/kernel/vmlinux.lds.S b/arch/cris/kernel/vmlinux.lds.S
index 4422189..c49be84 100644
--- a/arch/cris/kernel/vmlinux.lds.S
+++ b/arch/cris/kernel/vmlinux.lds.S
@@ -72,11 +72,6 @@
INIT_TEXT_SECTION(PAGE_SIZE)
.init.data : { INIT_DATA }
.init.setup : { INIT_SETUP(16) }
-#ifdef CONFIG_ETRAX_ARCH_V32
- __start___param = .;
- __param : { *(__param) }
- __stop___param = .;
-#endif
.initcall.init : {
INIT_CALLS
}
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index b605ff3..829a2a1 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -847,11 +847,15 @@
dev_err(dev->dev, "Arbitration lost\n");
err |= OMAP_I2C_STAT_AL;
}
+ /*
+ * ProDB0017052: Clear ARDY bit twice
+ */
if (stat & (OMAP_I2C_STAT_ARDY | OMAP_I2C_STAT_NACK |
OMAP_I2C_STAT_AL)) {
omap_i2c_ack_stat(dev, stat &
(OMAP_I2C_STAT_RRDY | OMAP_I2C_STAT_RDR |
- OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR));
+ OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR |
+ OMAP_I2C_STAT_ARDY));
omap_i2c_complete_cmd(dev, err);
return IRQ_HANDLED;
}
@@ -1137,12 +1141,41 @@
return 0;
}
+#ifdef CONFIG_SUSPEND
+static int omap_i2c_suspend(struct device *dev)
+{
+ if (!pm_runtime_suspended(dev))
+ if (dev->bus && dev->bus->pm && dev->bus->pm->runtime_suspend)
+ dev->bus->pm->runtime_suspend(dev);
+
+ return 0;
+}
+
+static int omap_i2c_resume(struct device *dev)
+{
+ if (!pm_runtime_suspended(dev))
+ if (dev->bus && dev->bus->pm && dev->bus->pm->runtime_resume)
+ dev->bus->pm->runtime_resume(dev);
+
+ return 0;
+}
+
+static struct dev_pm_ops omap_i2c_pm_ops = {
+ .suspend = omap_i2c_suspend,
+ .resume = omap_i2c_resume,
+};
+#define OMAP_I2C_PM_OPS (&omap_i2c_pm_ops)
+#else
+#define OMAP_I2C_PM_OPS NULL
+#endif
+
static struct platform_driver omap_i2c_driver = {
.probe = omap_i2c_probe,
.remove = omap_i2c_remove,
.driver = {
.name = "omap_i2c",
.owner = THIS_MODULE,
+ .pm = OMAP_I2C_PM_OPS,
},
};
diff --git a/drivers/i2c/busses/i2c-stu300.c b/drivers/i2c/busses/i2c-stu300.c
index 495be45..266135d 100644
--- a/drivers/i2c/busses/i2c-stu300.c
+++ b/drivers/i2c/busses/i2c-stu300.c
@@ -942,7 +942,7 @@
adap->owner = THIS_MODULE;
/* DDC class but actually often used for more generic I2C */
adap->class = I2C_CLASS_DDC;
- strncpy(adap->name, "ST Microelectronics DDC I2C adapter",
+ strlcpy(adap->name, "ST Microelectronics DDC I2C adapter",
sizeof(adap->name));
adap->nr = bus_nr;
adap->algo = &stu300_algo;
diff --git a/drivers/input/gameport/gameport.c b/drivers/input/gameport/gameport.c
index 23cf8fc..5b8f59d 100644
--- a/drivers/input/gameport/gameport.c
+++ b/drivers/input/gameport/gameport.c
@@ -360,7 +360,7 @@
event->owner = owner;
list_add_tail(&event->node, &gameport_event_list);
- schedule_work(&gameport_event_work);
+ queue_work(system_long_wq, &gameport_event_work);
out:
spin_unlock_irqrestore(&gameport_event_lock, flags);
diff --git a/drivers/input/keyboard/tegra-kbc.c b/drivers/input/keyboard/tegra-kbc.c
index ac471b7..99ce903 100644
--- a/drivers/input/keyboard/tegra-kbc.c
+++ b/drivers/input/keyboard/tegra-kbc.c
@@ -71,8 +71,9 @@
spinlock_t lock;
unsigned int repoll_dly;
unsigned long cp_dly_jiffies;
+ bool use_fn_map;
const struct tegra_kbc_platform_data *pdata;
- unsigned short keycode[KBC_MAX_KEY];
+ unsigned short keycode[KBC_MAX_KEY * 2];
unsigned short current_keys[KBC_MAX_KPENT];
unsigned int num_pressed_keys;
struct timer_list timer;
@@ -178,6 +179,40 @@
KEY(15, 5, KEY_F2),
KEY(15, 6, KEY_CAPSLOCK),
KEY(15, 7, KEY_F6),
+
+ /* Software Handled Function Keys */
+ KEY(20, 0, KEY_KP7),
+
+ KEY(21, 0, KEY_KP9),
+ KEY(21, 1, KEY_KP8),
+ KEY(21, 2, KEY_KP4),
+ KEY(21, 4, KEY_KP1),
+
+ KEY(22, 1, KEY_KPSLASH),
+ KEY(22, 2, KEY_KP6),
+ KEY(22, 3, KEY_KP5),
+ KEY(22, 4, KEY_KP3),
+ KEY(22, 5, KEY_KP2),
+ KEY(22, 7, KEY_KP0),
+
+ KEY(27, 1, KEY_KPASTERISK),
+ KEY(27, 3, KEY_KPMINUS),
+ KEY(27, 4, KEY_KPPLUS),
+ KEY(27, 5, KEY_KPDOT),
+
+ KEY(28, 5, KEY_VOLUMEUP),
+
+ KEY(29, 3, KEY_HOME),
+ KEY(29, 4, KEY_END),
+ KEY(29, 5, KEY_BRIGHTNESSDOWN),
+ KEY(29, 6, KEY_VOLUMEDOWN),
+ KEY(29, 7, KEY_BRIGHTNESSUP),
+
+ KEY(30, 0, KEY_NUMLOCK),
+ KEY(30, 1, KEY_SCROLLLOCK),
+ KEY(30, 2, KEY_MUTE),
+
+ KEY(31, 4, KEY_HELP),
};
static const struct matrix_keymap_data tegra_kbc_default_keymap_data = {
@@ -224,6 +259,7 @@
unsigned int i;
unsigned int num_down = 0;
unsigned long flags;
+ bool fn_keypress = false;
spin_lock_irqsave(&kbc->lock, flags);
for (i = 0; i < KBC_MAX_KPENT; i++) {
@@ -237,11 +273,28 @@
MATRIX_SCAN_CODE(row, col, KBC_ROW_SHIFT);
scancodes[num_down] = scancode;
- keycodes[num_down++] = kbc->keycode[scancode];
+ keycodes[num_down] = kbc->keycode[scancode];
+ /* If driver uses Fn map, do not report the Fn key. */
+ if ((keycodes[num_down] == KEY_FN) && kbc->use_fn_map)
+ fn_keypress = true;
+ else
+ num_down++;
}
val >>= 8;
}
+
+ /*
+ * If the platform uses Fn keymaps, translate keys on a Fn keypress.
+ * Function keycodes are KBC_MAX_KEY apart from the plain keycodes.
+ */
+ if (fn_keypress) {
+ for (i = 0; i < num_down; i++) {
+ scancodes[i] += KBC_MAX_KEY;
+ keycodes[i] = kbc->keycode[scancodes[i]];
+ }
+ }
+
spin_unlock_irqrestore(&kbc->lock, flags);
tegra_kbc_report_released_keys(kbc->idev,
@@ -594,8 +647,11 @@
input_dev->keycode = kbc->keycode;
input_dev->keycodesize = sizeof(kbc->keycode[0]);
- input_dev->keycodemax = ARRAY_SIZE(kbc->keycode);
+ input_dev->keycodemax = KBC_MAX_KEY;
+ if (pdata->use_fn_map)
+ input_dev->keycodemax *= 2;
+ kbc->use_fn_map = pdata->use_fn_map;
keymap_data = pdata->keymap_data ?: &tegra_kbc_default_keymap_data;
matrix_keypad_build_keymap(keymap_data, KBC_ROW_SHIFT,
input_dev->keycode, input_dev->keybit);
diff --git a/drivers/input/mouse/synaptics.h b/drivers/input/mouse/synaptics.h
index 25e5d04..7453938 100644
--- a/drivers/input/mouse/synaptics.h
+++ b/drivers/input/mouse/synaptics.h
@@ -51,6 +51,29 @@
#define SYN_EXT_CAP_REQUESTS(c) (((c) & 0x700000) >> 20)
#define SYN_CAP_MULTI_BUTTON_NO(ec) (((ec) & 0x00f000) >> 12)
#define SYN_CAP_PRODUCT_ID(ec) (((ec) & 0xff0000) >> 16)
+
+/*
+ * The following describes response for the 0x0c query.
+ *
+ * byte mask name meaning
+ * ---- ---- ------- ------------
+ * 1 0x01 adjustable threshold capacitive button sensitivity
+ * can be adjusted
+ * 1 0x02 report max query 0x0d gives max coord reported
+ * 1 0x04 clearpad sensor is ClearPad product
+ * 1 0x08 advanced gesture not particularly meaningful
+ * 1 0x10 clickpad bit 0 1-button ClickPad
+ * 1 0x60 multifinger mode identifies firmware finger counting
+ * (not reporting!) algorithm.
+ * Not particularly meaningful
+ * 1 0x80 covered pad W clipped to 14, 15 == pad mostly covered
+ * 2 0x01 clickpad bit 1 2-button ClickPad
+ * 2 0x02 deluxe LED controls touchpad support LED commands
+ * ala multimedia control bar
+ * 2 0x04 reduced filtering firmware does less filtering on
+ * position data, driver should watch
+ * for noise.
+ */
#define SYN_CAP_CLICKPAD(ex0c) ((ex0c) & 0x100000) /* 1-button ClickPad */
#define SYN_CAP_CLICKPAD2BTN(ex0c) ((ex0c) & 0x000100) /* 2-button ClickPad */
#define SYN_CAP_MAX_DIMENSIONS(ex0c) ((ex0c) & 0x020000)
diff --git a/drivers/input/serio/serio.c b/drivers/input/serio/serio.c
index 7c38d1f..ba70058 100644
--- a/drivers/input/serio/serio.c
+++ b/drivers/input/serio/serio.c
@@ -299,7 +299,7 @@
event->owner = owner;
list_add_tail(&event->node, &serio_event_list);
- schedule_work(&serio_event_work);
+ queue_work(system_long_wq, &serio_event_work);
out:
spin_unlock_irqrestore(&serio_event_lock, flags);
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index 44c5954..81ce6a8 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -48,6 +48,10 @@
{ USB_DEVICE(0x04b4, 0x0526), .driver_info =
USB_QUIRK_CONFIG_INTF_STRINGS },
+ /* Samsung Android phone modem - ID conflict with SPH-I500 */
+ { USB_DEVICE(0x04e8, 0x6601), .driver_info =
+ USB_QUIRK_CONFIG_INTF_STRINGS },
+
/* Roland SC-8820 */
{ USB_DEVICE(0x0582, 0x0007), .driver_info = USB_QUIRK_RESET_RESUME },
@@ -68,6 +72,10 @@
/* M-Systems Flash Disk Pioneers */
{ USB_DEVICE(0x08ec, 0x1000), .driver_info = USB_QUIRK_RESET_RESUME },
+ /* Keytouch QWERTY Panel keyboard */
+ { USB_DEVICE(0x0926, 0x3333), .driver_info =
+ USB_QUIRK_CONFIG_INTF_STRINGS },
+
/* X-Rite/Gretag-Macbeth Eye-One Pro display colorimeter */
{ USB_DEVICE(0x0971, 0x2000), .driver_info = USB_QUIRK_NO_SET_INTF },
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index d74a811..e6400be 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -488,6 +488,15 @@
unsigned set_address:1;
unsigned test_mode:1;
unsigned softconnect:1;
+
+ u8 address;
+ u8 test_mode_nr;
+ u16 ackpend; /* ep0 */
+ enum musb_g_ep0_state ep0_state;
+ struct usb_gadget g; /* the gadget */
+ struct usb_gadget_driver *gadget_driver; /* its driver */
+#endif
+
/*
* FIXME: Remove this flag.
*
@@ -501,14 +510,6 @@
*/
unsigned double_buffer_not_ok:1 __deprecated;
- u8 address;
- u8 test_mode_nr;
- u16 ackpend; /* ep0 */
- enum musb_g_ep0_state ep0_state;
- struct usb_gadget g; /* the gadget */
- struct usb_gadget_driver *gadget_driver; /* its driver */
-#endif
-
struct musb_hdrc_config *config;
#ifdef MUSB_CONFIG_PROC_FS
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index a3f1233..bc8badd 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -362,6 +362,7 @@
static int omap2430_musb_exit(struct musb *musb)
{
+ del_timer_sync(&musb_idle_timer);
omap2430_low_level_exit(musb);
otg_put_transceiver(musb->xceiv);
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index 7481ff8..0457813 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -301,6 +301,9 @@
{ USB_DEVICE(0x1199, 0x68A3), /* Sierra Wireless Direct IP modems */
.driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
},
+ { USB_DEVICE(0x0f3d, 0x68A3), /* Airprime/Sierra Wireless Direct IP modems */
+ .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
+ },
{ USB_DEVICE(0x413C, 0x08133) }, /* Dell Computer Corp. Wireless 5720 VZW Mobile Broadband (EVDO Rev-A) Minicard GPS Port */
{ }
diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c
index b004b2a..9c014e2 100644
--- a/drivers/usb/serial/usb_wwan.c
+++ b/drivers/usb/serial/usb_wwan.c
@@ -295,12 +295,15 @@
__func__, status, endpoint);
} else {
tty = tty_port_tty_get(&port->port);
- if (urb->actual_length) {
- tty_insert_flip_string(tty, data, urb->actual_length);
- tty_flip_buffer_push(tty);
- } else
- dbg("%s: empty read urb received", __func__);
- tty_kref_put(tty);
+ if (tty) {
+ if (urb->actual_length) {
+ tty_insert_flip_string(tty, data,
+ urb->actual_length);
+ tty_flip_buffer_push(tty);
+ } else
+ dbg("%s: empty read urb received", __func__);
+ tty_kref_put(tty);
+ }
/* Resubmit urb so we continue receiving */
if (status != -ESHUTDOWN) {
diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c
index 15a5d89..1c11959 100644
--- a/drivers/usb/serial/visor.c
+++ b/drivers/usb/serial/visor.c
@@ -27,6 +27,7 @@
#include <linux/uaccess.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>
+#include <linux/usb/cdc.h>
#include "visor.h"
/*
@@ -479,6 +480,17 @@
dbg("%s", __func__);
+ /*
+ * some Samsung Android phones in modem mode have the same ID
+ * as SPH-I500, but they are ACM devices, so dont bind to them
+ */
+ if (id->idVendor == SAMSUNG_VENDOR_ID &&
+ id->idProduct == SAMSUNG_SPH_I500_ID &&
+ serial->dev->descriptor.bDeviceClass == USB_CLASS_COMM &&
+ serial->dev->descriptor.bDeviceSubClass ==
+ USB_CDC_SUBCLASS_ACM)
+ return -ENODEV;
+
if (serial->dev->actconfig->desc.bConfigurationValue != 1) {
dev_err(&serial->dev->dev, "active config #%d != 1 ??\n",
serial->dev->actconfig->desc.bConfigurationValue);
diff --git a/fs/xfs/linux-2.6/xfs_discard.c b/fs/xfs/linux-2.6/xfs_discard.c
index 05201ae..d61611c 100644
--- a/fs/xfs/linux-2.6/xfs_discard.c
+++ b/fs/xfs/linux-2.6/xfs_discard.c
@@ -152,6 +152,8 @@
if (!capable(CAP_SYS_ADMIN))
return -XFS_ERROR(EPERM);
+ if (!blk_queue_discard(q))
+ return -XFS_ERROR(EOPNOTSUPP);
if (copy_from_user(&range, urange, sizeof(range)))
return -XFS_ERROR(EFAULT);
diff --git a/fs/xfs/xfs_fsops.c b/fs/xfs/xfs_fsops.c
index cec89dd..85668ef 100644
--- a/fs/xfs/xfs_fsops.c
+++ b/fs/xfs/xfs_fsops.c
@@ -53,6 +53,9 @@
xfs_fsop_geom_t *geo,
int new_version)
{
+
+ memset(geo, 0, sizeof(*geo));
+
geo->blocksize = mp->m_sb.sb_blocksize;
geo->rtextsize = mp->m_sb.sb_rextsize;
geo->agblocks = mp->m_sb.sb_agblocks;