diff --git a/Documentation/arm/sunxi/README b/Documentation/arm/sunxi/README
index c7a0554..cd02433 100644
--- a/Documentation/arm/sunxi/README
+++ b/Documentation/arm/sunxi/README
@@ -31,6 +31,8 @@
         + User Manual
           http://dl.linux-sunxi.org/A13/A13%20User%20Manual%20-%20v1.2%20%282013-01-08%29.pdf
 
+      - Next Thing Co GR8 (sun5i)
+
     * Dual ARM Cortex-A7 based SoCs
       - Allwinner A20 (sun7i)
         + User Manual
diff --git a/Documentation/block/biodoc.txt b/Documentation/block/biodoc.txt
index bcdb2b4..918e1e0 100644
--- a/Documentation/block/biodoc.txt
+++ b/Documentation/block/biodoc.txt
@@ -115,7 +115,7 @@
 
 Various parameters that the generic i/o scheduler logic uses are set at
 a per-queue level (e.g maximum request size, maximum number of segments in
-a scatter-gather list, hardsect size)
+a scatter-gather list, logical block size)
 
 Some parameters that were earlier available as global arrays indexed by
 major/minor are now directly associated with the queue. Some of these may
@@ -156,7 +156,7 @@
 	blk_queue_max_segment_size(q, max_seg_size)
 		Maximum size of a clustered segment, 64kB default.
 
-	blk_queue_hardsect_size(q, hardsect_size)
+	blk_queue_logical_block_size(q, logical_block_size)
 		Lowest possible sector size that the hardware can operate
 		on, 512 bytes default.
 
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt
index 6ffe087..9c97de2 100644
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt
@@ -38,6 +38,10 @@
 Required root node properties:
 compatible = "raspberrypi,compute-module", "brcm,bcm2835";
 
+Raspberry Pi Zero
+Required root node properties:
+compatible = "raspberrypi,model-zero", "brcm,bcm2835";
+
 Generic BCM2835 board
 Required root node properties:
 compatible = "brcm,bcm2835";
diff --git a/Documentation/devicetree/bindings/arm/davinci.txt b/Documentation/devicetree/bindings/arm/davinci.txt
index cfaeda4..f0841ce 100644
--- a/Documentation/devicetree/bindings/arm/davinci.txt
+++ b/Documentation/devicetree/bindings/arm/davinci.txt
@@ -5,6 +5,10 @@
 Required root node properties:
     - compatible = "ti,da850-evm", "ti,da850";
 
+DA850/OMAP-L138/AM18x L138/C6748 Development Kit (LCDK) board
+Required root node properties:
+    - compatible = "ti,da850-lcdk", "ti,da850";
+
 EnBW AM1808 based CMC board
 Required root node properties:
     - compatible = "enbw,cmc", "ti,da850;
diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
index 83fe816..3f81575 100644
--- a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
+++ b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
@@ -175,38 +175,55 @@
 	};
 
 -----------------------------------------------------------------------
-Hisilicon HiP05 PCIe-SAS system controller
+Hisilicon HiP05/HiP06 PCIe-SAS sub system controller
 
 Required properties:
 - compatible : "hisilicon,pcie-sas-subctrl", "syscon";
 - reg : Register address and size
 
-The HiP05 PCIe-SAS system controller is shared by PCIe and SAS controllers in
-HiP05 Soc to implement some basic configurations.
+The PCIe-SAS sub system controller is shared by PCIe and SAS controllers in
+HiP05 or HiP06 Soc to implement some basic configurations.
 
 Example:
-	/* for HiP05 PCIe-SAS system */
-	pcie_sas: system_controller@0xb0000000 {
+	/* for HiP05 PCIe-SAS sub system */
+	pcie_sas: system_controller@b0000000 {
 		compatible = "hisilicon,pcie-sas-subctrl", "syscon";
 		reg = <0xb0000000 0x10000>;
 	};
 
-Hisilicon HiP05 PERISUB system controller
+Hisilicon HiP05/HiP06 PERI sub system controller
 
 Required properties:
-- compatible : "hisilicon,hip05-perisubc", "syscon";
+- compatible : "hisilicon,peri-subctrl", "syscon";
 - reg : Register address and size
 
-The HiP05 PERISUB system controller is shared by peripheral controllers in
-HiP05 Soc to implement some basic configurations. The peripheral
+The PERI sub system controller is shared by peripheral controllers in
+HiP05 or HiP06 Soc to implement some basic configurations. The peripheral
 controllers include mdio, ddr, iic, uart, timer and so on.
 
 Example:
-	/* for HiP05 perisub-ctrl-c system */
+	/* for HiP05 sub peri system */
 	peri_c_subctrl: syscon@80000000 {
-		compatible = "hisilicon,hip05-perisubc", "syscon";
+		compatible = "hisilicon,peri-subctrl", "syscon";
 		reg = <0x0 0x80000000 0x0 0x10000>;
 	};
+
+Hisilicon HiP05/HiP06 DSA sub system controller
+
+Required properties:
+- compatible : "hisilicon,dsa-subctrl", "syscon";
+- reg : Register address and size
+
+The DSA sub system controller is shared by peripheral controllers in
+HiP05 or HiP06 Soc to implement some basic configurations.
+
+Example:
+	/* for HiP05 dsa sub system */
+	pcie_sas: system_controller@a0000000 {
+		compatible = "hisilicon,dsa-subctrl", "syscon";
+		reg = <0xa0000000 0x10000>;
+	};
+
 -----------------------------------------------------------------------
 Hisilicon CPU controller
 
diff --git a/Documentation/devicetree/bindings/arm/marvell/armada-39x.txt b/Documentation/devicetree/bindings/arm/marvell/armada-39x.txt
index 53d4ff9..8946866 100644
--- a/Documentation/devicetree/bindings/arm/marvell/armada-39x.txt
+++ b/Documentation/devicetree/bindings/arm/marvell/armada-39x.txt
@@ -8,8 +8,19 @@
 
  - compatible: must contain "marvell,armada390"
 
-In addition, boards using the Marvell Armada 398 SoC shall have the
-following property before the previous one:
+In addition, boards using the Marvell Armada 395 SoC shall have the
+following property before the common "marvell,armada390" one:
+
+Required root node property:
+
+compatible: must contain "marvell,armada395"
+
+Example:
+
+compatible = "marvell,a395-gp", "marvell,armada395", "marvell,armada390";
+
+Boards using the Marvell Armada 398 SoC shall have the following
+property before the common "marvell,armada390" one:
 
 Required root node property:
 
diff --git a/Documentation/devicetree/bindings/arm/marvell/marvell,orion5x.txt b/Documentation/devicetree/bindings/arm/marvell/marvell,orion5x.txt
new file mode 100644
index 0000000..748a8f2
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/marvell/marvell,orion5x.txt
@@ -0,0 +1,25 @@
+Marvell Orion SoC Family Device Tree Bindings
+---------------------------------------------
+
+Boards with a SoC of the Marvell Orion family, eg 88f5181
+
+* Required root node properties:
+compatible: must contain "marvell,orion5x"
+
+In addition, the above compatible shall be extended with the specific
+SoC. Currently known SoC compatibles are:
+
+"marvell,orion5x-88f5181"
+"marvell,orion5x-88f5182"
+
+And in addition, the compatible shall be extended with the specific
+board. Currently known boards are:
+
+"buffalo,lsgl"
+"buffalo,lswsgl"
+"buffalo,lswtgl"
+"lacie,ethernet-disk-mini-v2"
+"lacie,d2-network"
+"marvell,rd-88f5182-nas"
+"maxtor,shared-storage-2"
+"netgear,wnr854t"
diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt
index 94b57f2..f53e2ee 100644
--- a/Documentation/devicetree/bindings/arm/omap/omap.txt
+++ b/Documentation/devicetree/bindings/arm/omap/omap.txt
@@ -180,3 +180,9 @@
 
 - DRA722 EVM: Software Development Board for DRA722
   compatible = "ti,dra72-evm", "ti,dra722", "ti,dra72", "ti,dra7"
+
+- DM3730 Logic PD Torpedo + Wireless: Commercial System on Module with WiFi and Bluetooth
+  compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap3630", "ti,omap3"
+
+- DM3730 Logic PD SOM-LV: Commercial System on Module with WiFi and Bluetooth
+  compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3630", "ti,omap3"
diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt
index 6668645..55f388f 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.txt
+++ b/Documentation/devicetree/bindings/arm/rockchip.txt
@@ -31,6 +31,10 @@
     or
       - compatible = "firefly,firefly-rk3288-beta", "rockchip,rk3288";
 
+- Firefly Firefly-RK3288 Reload board:
+    Required root node properties:
+      - compatible = "firefly,firefly-rk3288-reload", "rockchip,rk3288";
+
 - ChipSPARK PopMetal-RK3288 board:
     Required root node properties:
       - compatible = "chipspark,popmetal-rk3288", "rockchip,rk3288";
@@ -110,6 +114,14 @@
 - Rockchip RK3229 Evaluation board:
      - compatible = "rockchip,rk3229-evb", "rockchip,rk3229";
 
+- Rockchip RK3288 Fennec board:
+    Required root node properties:
+     - compatible = "rockchip,rk3288-fennec", "rockchip,rk3288";
+
 - Rockchip RK3399 evb:
     Required root node properties:
       - compatible = "rockchip,rk3399-evb", "rockchip,rk3399";
+
+- Tronsmart Orion R68 Meta
+    Required root node properties:
+      - compatible = "tronsmart,orion-r68-meta", "rockchip,rk3368";
diff --git a/Documentation/devicetree/bindings/arm/samsung/pmu.txt b/Documentation/devicetree/bindings/arm/samsung/pmu.txt
index 2d6356d..bf5fc59 100644
--- a/Documentation/devicetree/bindings/arm/samsung/pmu.txt
+++ b/Documentation/devicetree/bindings/arm/samsung/pmu.txt
@@ -10,6 +10,7 @@
 		   - "samsung,exynos5260-pmu" - for Exynos5260 SoC.
 		   - "samsung,exynos5410-pmu" - for Exynos5410 SoC,
 		   - "samsung,exynos5420-pmu" - for Exynos5420 SoC.
+		   - "samsung,exynos5433-pmu" - for Exynos5433 SoC.
 		   - "samsung,exynos7-pmu" - for Exynos7 SoC.
 		second value must be always "syscon".
 
diff --git a/Documentation/devicetree/bindings/arm/shmobile.txt b/Documentation/devicetree/bindings/arm/shmobile.txt
index 1df32d3..2f0b716 100644
--- a/Documentation/devicetree/bindings/arm/shmobile.txt
+++ b/Documentation/devicetree/bindings/arm/shmobile.txt
@@ -49,6 +49,8 @@
     compatible = "renesas,genmai", "renesas,r7s72100"
   - Gose
     compatible = "renesas,gose", "renesas,r8a7793"
+  - H3ULCB (RTP0RC7795SKB00010S)
+    compatible = "renesas,h3ulcb", "renesas,r8a7795";
   - Henninger
     compatible = "renesas,henninger", "renesas,r8a7791"
   - Koelsch (RTP0RC7791SEB00010S)
@@ -63,9 +65,13 @@
     compatible = "renesas,marzen", "renesas,r8a7779"
   - Porter (M2-LCDP)
     compatible = "renesas,porter", "renesas,r8a7791"
+  - RSKRZA1 (YR0K77210C000BE)
+    compatible = "renesas,rskrza1", "renesas,r7s72100"
   - Salvator-X (RTP0RC7795SIPB0010S)
     compatible = "renesas,salvator-x", "renesas,r8a7795";
   - Salvator-X
     compatible = "renesas,salvator-x", "renesas,r8a7796";
   - SILK (RTP0RC7794LCB00011S)
     compatible = "renesas,silk", "renesas,r8a7794"
+  - Wheat
+    compatible = "renesas,wheat", "renesas,r8a7792"
diff --git a/Documentation/devicetree/bindings/arm/sunxi.txt b/Documentation/devicetree/bindings/arm/sunxi.txt
index 7e79fcc..3975d0a 100644
--- a/Documentation/devicetree/bindings/arm/sunxi.txt
+++ b/Documentation/devicetree/bindings/arm/sunxi.txt
@@ -14,3 +14,4 @@
   allwinner,sun8i-a83t
   allwinner,sun8i-h3
   allwinner,sun9i-a80
+  nextthing,gr8
diff --git a/Documentation/devicetree/bindings/arm/technologic.txt b/Documentation/devicetree/bindings/arm/technologic.txt
index 8422988..33797ac 100644
--- a/Documentation/devicetree/bindings/arm/technologic.txt
+++ b/Documentation/devicetree/bindings/arm/technologic.txt
@@ -4,3 +4,9 @@
 TS-4800 board
 Required root node properties:
 	- compatible = "technologic,imx51-ts4800", "fsl,imx51";
+
+TS-4900 is a System-on-Module based on the Freescale i.MX6 System-on-Chip.
+It can be mounted on a carrier board providing additional peripheral connectors.
+Required root node properties:
+	- compatible = "technologic,imx6dl-ts4900", "fsl,imx6dl"
+	- compatible = "technologic,imx6q-ts4900", "fsl,imx6q"
diff --git a/Documentation/devicetree/bindings/arm/zte.txt b/Documentation/devicetree/bindings/arm/zte.txt
index 3ff5c9e..83369785 100644
--- a/Documentation/devicetree/bindings/arm/zte.txt
+++ b/Documentation/devicetree/bindings/arm/zte.txt
@@ -13,3 +13,27 @@
 
 Bus matrix required properties:
       - compatible = "zte,zx-bus-matrix"
+
+
+---------------------------------------
+-  ZX296718 SoC:
+    Required root node properties:
+      - compatible = "zte,zx296718"
+
+ZX296718 EVB board:
+      - "zte,zx296718-evb"
+
+System management required properties:
+      - compatible = "zte,zx296718-aon-sysctrl"
+      - compatible = "zte,zx296718-sysctrl"
+
+Example:
+aon_sysctrl: aon-sysctrl@116000 {
+	compatible = "zte,zx296718-aon-sysctrl", "syscon";
+	reg = <0x116000 0x1000>;
+};
+
+sysctrl: sysctrl@1463000 {
+	compatible = "zte,zx296718-sysctrl", "syscon";
+	reg = <0x1463000 0x1000>;
+};
diff --git a/Documentation/devicetree/bindings/bus/qcom,ebi2.txt b/Documentation/devicetree/bindings/bus/qcom,ebi2.txt
new file mode 100644
index 0000000..920681f
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/qcom,ebi2.txt
@@ -0,0 +1,138 @@
+Qualcomm External Bus Interface 2 (EBI2)
+
+The EBI2 contains two peripheral blocks: XMEM and LCDC. The XMEM handles any
+external memory (such as NAND or other memory-mapped peripherals) whereas
+LCDC handles LCD displays.
+
+As it says it connects devices to an external bus interface, meaning address
+lines (up to 9 address lines so can only address 1KiB external memory space),
+data lines (16 bits), OE (output enable), ADV (address valid, used on some
+NOR flash memories), WE (write enable). This on top of 6 different chip selects
+(CS0 thru CS5) so that in theory 6 different devices can be connected.
+
+Apparently this bus is clocked at 64MHz. It has dedicated pins on the package
+and the bus can only come out on these pins, however if some of the pins are
+unused they can be left unconnected or remuxed to be used as GPIO or in some
+cases other orthogonal functions as well.
+
+Also CS1 and CS2 has -A and -B signals. Why they have that is unclear to me.
+
+The chip selects have the following memory range assignments. This region of
+memory is referred to as "Chip Peripheral SS FPB0" and is 168MB big.
+
+Chip Select                     Physical address base
+CS0 GPIO134                     0x1a800000-0x1b000000 (8MB)
+CS1 GPIO39 (A) / GPIO123 (B)    0x1b000000-0x1b800000 (8MB)
+CS2 GPIO40 (A) / GPIO124 (B)    0x1b800000-0x1c000000 (8MB)
+CS3 GPIO133                     0x1d000000-0x25000000 (128 MB)
+CS4 GPIO132                     0x1c800000-0x1d000000 (8MB)
+CS5 GPIO131                     0x1c000000-0x1c800000 (8MB)
+
+The APQ8060 Qualcomm Application Processor User Guide, 80-N7150-14 Rev. A,
+August 6, 2012 contains some incomplete documentation of the EBI2.
+
+FIXME: the manual mentions "write precharge cycles" and "precharge cycles".
+We have not been able to figure out which bit fields these correspond to
+in the hardware, or what valid values exist. The current hypothesis is that
+this is something just used on the FAST chip selects and that the SLOW
+chip selects are understood fully. There is also a "byte device enable"
+flag somewhere for 8bit memories.
+
+FIXME: The chipselects have SLOW and FAST configuration registers. It's a bit
+unclear what this means, if they are mutually exclusive or can be used
+together, or if some chip selects are hardwired to be FAST and others are SLOW
+by design.
+
+The XMEM registers are totally undocumented but could be partially decoded
+because the Cypress AN49576 Antioch Westbridge apparently has suspiciously
+similar register layout, see: http://www.cypress.com/file/105771/download
+
+Required properties:
+- compatible: should be one of:
+  "qcom,msm8660-ebi2"
+  "qcom,apq8060-ebi2"
+- #address-cells: shoule be <2>: the first cell is the chipselect,
+  the second cell is the offset inside the memory range
+- #size-cells: should be <1>
+- ranges: should be set to:
+  ranges = <0 0x0 0x1a800000 0x00800000>,
+           <1 0x0 0x1b000000 0x00800000>,
+           <2 0x0 0x1b800000 0x00800000>,
+           <3 0x0 0x1d000000 0x08000000>,
+           <4 0x0 0x1c800000 0x00800000>,
+           <5 0x0 0x1c000000 0x00800000>;
+- reg: two ranges of registers: EBI2 config and XMEM config areas
+- reg-names: should be "ebi2", "xmem"
+- clocks: two clocks, EBI_2X and EBI
+- clock-names: shoule be "ebi2x", "ebi2"
+
+Optional subnodes:
+- Nodes inside the EBI2 will be considered device nodes.
+
+The following optional properties are properties that can be tagged onto
+any device subnode. We are assuming that there can be only ONE device per
+chipselect subnode, else the properties will become ambigous.
+
+Optional properties arrays for SLOW chip selects:
+- qcom,xmem-recovery-cycles: recovery cycles is the time the memory continues to
+  drive the data bus after OE is de-asserted, in order to avoid contention on
+  the data bus. They are inserted when reading one CS and switching to another
+  CS or read followed by write on the same CS. Valid values 0 thru 15. Minimum
+  value is actually 1, so a value of 0 will still yield 1 recovery cycle.
+- qcom,xmem-write-hold-cycles: write hold cycles, these are extra cycles
+  inserted after every write minimum 1. The data out is driven from the time
+  WE is asserted until CS is asserted. With a hold of 1 (value = 0), the CS
+  stays active for 1 extra cycle etc. Valid values 0 thru 15.
+- qcom,xmem-write-delta-cycles: initial latency for write cycles inserted for
+  the first write to a page or burst memory. Valid values 0 thru 255.
+- qcom,xmem-read-delta-cycles: initial latency for read cycles inserted for the
+  first read to a page or burst memory. Valid values 0 thru 255.
+- qcom,xmem-write-wait-cycles: number of wait cycles for every write access, 0=1
+  cycle. Valid values 0 thru 15.
+- qcom,xmem-read-wait-cycles: number of wait cycles for every read access, 0=1
+  cycle. Valid values 0 thru 15.
+
+Optional properties arrays for FAST chip selects:
+- qcom,xmem-address-hold-enable: this is a boolean property stating that we
+  shall hold the address for an extra cycle to meet hold time requirements
+  with ADV assertion.
+- qcom,xmem-adv-to-oe-recovery-cycles: the number of cycles elapsed before an OE
+  assertion, with respect to the cycle where ADV (address valid) is asserted.
+  2 means 2 cycles between ADV and OE. Valid values 0, 1, 2 or 3.
+- qcom,xmem-read-hold-cycles: the length in cycles of the first segment of a
+  read transfer. For a single read trandfer this will be the time from CS
+  assertion to OE assertion. Valid values 0 thru 15.
+
+
+Example:
+
+ebi2@1a100000 {
+	compatible = "qcom,apq8060-ebi2";
+	#address-cells = <2>;
+	#size-cells = <1>;
+	ranges = <0 0x0 0x1a800000 0x00800000>,
+		 <1 0x0 0x1b000000 0x00800000>,
+		 <2 0x0 0x1b800000 0x00800000>,
+		 <3 0x0 0x1d000000 0x08000000>,
+		 <4 0x0 0x1c800000 0x00800000>,
+		 <5 0x0 0x1c000000 0x00800000>;
+	reg = <0x1a100000 0x1000>, <0x1a110000 0x1000>;
+	reg-names = "ebi2", "xmem";
+	clocks = <&gcc EBI2_2X_CLK>, <&gcc EBI2_CLK>;
+	clock-names = "ebi2x", "ebi2";
+	/* Make sure to set up the pin control for the EBI2 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&foo_ebi2_pins>;
+
+	foo-ebi2@2,0 {
+		compatible = "foo";
+		reg = <2 0x0 0x100>;
+		(...)
+		qcom,xmem-recovery-cycles = <0>;
+		qcom,xmem-write-hold-cycles = <3>;
+		qcom,xmem-write-delta-cycles = <31>;
+		qcom,xmem-read-delta-cycles = <28>;
+		qcom,xmem-write-wait-cycles = <9>;
+		qcom,xmem-read-wait-cycles = <9>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt
index 670c2af..eb985a6 100644
--- a/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt
+++ b/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt
@@ -52,6 +52,7 @@
 	"marvell,dove-core-clock" - for Dove SoC core clocks
 	"marvell,kirkwood-core-clock" - for Kirkwood SoC (except mv88f6180)
 	"marvell,mv88f6180-core-clock" - for Kirkwood MV88f6180 SoC
+	"marvell,mv88f5181-core-clock" - for Orion MV88F5181 SoC
 	"marvell,mv88f5182-core-clock" - for Orion MV88F5182 SoC
 	"marvell,mv88f5281-core-clock" - for Orion MV88F5281 SoC
 	"marvell,mv88f6183-core-clock" - for Orion MV88F6183 SoC
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc.txt b/Documentation/devicetree/bindings/clock/qcom,gcc.txt
index 869a2f0..3cf4421 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc.txt
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc.txt
@@ -23,6 +23,11 @@
 
 Optional properties :
 - #power-domain-cells : shall contain 1
+- Qualcomm TSENS (thermal sensor device) on some devices can
+be part of GCC and hence the TSENS properties can also be
+part of the GCC/clock-controller node.
+For more details on the TSENS properties please refer
+Documentation/devicetree/bindings/thermal/qcom-tsens.txt
 
 Example:
 	clock-controller@900000 {
@@ -32,3 +37,14 @@
 		#reset-cells = <1>;
 		#power-domain-cells = <1>;
 	};
+
+Example of GCC with TSENS properties:
+	clock-controller@900000 {
+		compatible = "qcom,gcc-apq8064";
+		reg = <0x00900000 0x4000>;
+		nvmem-cells = <&tsens_calib>, <&tsens_backup>;
+		nvmem-cell-names = "calib", "calib_backup";
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+		#thermal-sensor-cells = <1>;
+	};
diff --git a/Documentation/devicetree/bindings/clock/st,stm32-rcc.txt b/Documentation/devicetree/bindings/clock/st,stm32-rcc.txt
index fee3205..c209de6 100644
--- a/Documentation/devicetree/bindings/clock/st,stm32-rcc.txt
+++ b/Documentation/devicetree/bindings/clock/st,stm32-rcc.txt
@@ -1,16 +1,16 @@
 STMicroelectronics STM32 Reset and Clock Controller
 ===================================================
 
-The RCC IP is both a reset and a clock controller. This documentation only
-describes the clock part.
+The RCC IP is both a reset and a clock controller.
 
-Please also refer to clock-bindings.txt in this directory for common clock
-controller binding usage.
+Please refer to clock-bindings.txt for common clock controller binding usage.
+Please also refer to reset.txt for common reset controller binding usage.
 
 Required properties:
 - compatible: Should be "st,stm32f42xx-rcc"
 - reg: should be register base and length as documented in the
   datasheet
+- #reset-cells: 1, see below
 - #clock-cells: 2, device nodes should specify the clock in their "clocks"
   property, containing a phandle to the clock device node, an index selecting
   between gated clocks and other clocks and an index specifying the clock to
@@ -19,6 +19,7 @@
 Example:
 
 	rcc: rcc@40023800 {
+		#reset-cells = <1>;
 		#clock-cells = <2>
 		compatible = "st,stm32f42xx-rcc", "st,stm32-rcc";
 		reg = <0x40023800 0x400>;
@@ -35,16 +36,23 @@
 It is calculated as: index = register_offset / 4 * 32 + bit_offset.
 Where bit_offset is the bit offset within the register (LSB is 0, MSB is 31).
 
+To simplify the usage and to share bit definition with the reset and clock
+drivers of the RCC IP, macros are available to generate the index in
+human-readble format.
+
+For STM32F4 series, the macro are available here:
+ - include/dt-bindings/mfd/stm32f4-rcc.h
+
 Example:
 
 	/* Gated clock, AHB1 bit 0 (GPIOA) */
 	... {
-		clocks = <&rcc 0 0>
+		clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOA)>
 	};
 
 	/* Gated clock, AHB2 bit 4 (CRYP) */
 	... {
-		clocks = <&rcc 0 36>
+		clocks = <&rcc 0 STM32F4_AHB2_CLOCK(CRYP)>
 	};
 
 Specifying other clocks
@@ -61,5 +69,25 @@
 
 	/* Misc clock, FCLK */
 	... {
-		clocks = <&rcc 1 1>
+		clocks = <&rcc 1 STM32F4_APB1_CLOCK(TIM2)>
+	};
+
+
+Specifying softreset control of devices
+=======================================
+
+Device nodes should specify the reset channel required in their "resets"
+property, containing a phandle to the reset device node and an index specifying
+which channel to use.
+The index is the bit number within the RCC registers bank, starting from RCC
+base address.
+It is calculated as: index = register_offset / 4 * 32 + bit_offset.
+Where bit_offset is the bit offset within the register.
+For example, for CRC reset:
+  crc = AHB1RSTR_offset / 4 * 32 + CRCRST_bit_offset = 0x10 / 4 * 32 + 12 = 140
+
+example:
+
+	timer2 {
+		resets	= <&rcc STM32F4_APB1_RESET(TIM2)>;
 	};
diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_hdmi.txt b/Documentation/devicetree/bindings/display/exynos/exynos_hdmi.txt
index a2ec4c1..6394ea9e 100644
--- a/Documentation/devicetree/bindings/display/exynos/exynos_hdmi.txt
+++ b/Documentation/devicetree/bindings/display/exynos/exynos_hdmi.txt
@@ -9,7 +9,7 @@
 - reg: physical base address of the hdmi and length of memory mapped
 	region.
 - interrupts: interrupt number to the cpu.
-- hpd-gpio: following information about the hotplug gpio pin.
+- hpd-gpios: following information about the hotplug gpio pin.
 	a) phandle of the gpio controller node.
 	b) pin number within the gpio controller.
 	c) optional flags and pull up/down.
@@ -56,7 +56,7 @@
 		compatible = "samsung,exynos4212-hdmi";
 		reg = <0x14530000 0x100000>;
 		interrupts = <0 95 0>;
-		hpd-gpio = <&gpx3 7 1>;
+		hpd-gpios = <&gpx3 7 1>;
 		ddc = <&hdmi_ddc_node>;
 		phy = <&hdmi_phy_node>;
 		samsung,syscon-phandle = <&pmu_system_controller>;
diff --git a/Documentation/devicetree/bindings/display/panel/tpo,tpg110.txt b/Documentation/devicetree/bindings/display/panel/tpo,tpg110.txt
new file mode 100644
index 0000000..f5e3c6f
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/tpo,tpg110.txt
@@ -0,0 +1,47 @@
+TPO TPG110 Panel
+================
+
+This binding builds on the DPI bindings, adding a few properties
+as a superset of a DPI. See panel-dpi.txt for the required DPI
+bindings.
+
+Required properties:
+- compatible : "tpo,tpg110"
+- grestb-gpios : panel reset GPIO
+- scen-gpios : serial control enable GPIO
+- scl-gpios : serial control clock line GPIO
+- sda-gpios : serial control data line GPIO
+
+Required nodes:
+- Video port for DPI input, see panel-dpi.txt
+- Panel timing for DPI setup, see panel-dpi.txt
+
+Example
+-------
+
+panel {
+	compatible = "tpo,tpg110", "panel-dpi";
+	grestb-gpios = <&stmpe_gpio44 5 GPIO_ACTIVE_LOW>;
+	scen-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+	scl-gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+	backlight = <&bl>;
+
+	port {
+		nomadik_clcd_panel: endpoint {
+			remote-endpoint = <&nomadik_clcd_pads>;
+		};
+	};
+
+	panel-timing {
+		clock-frequency = <33200000>;
+		hactive = <800>;
+		hback-porch = <216>;
+		hfront-porch = <40>;
+		hsync-len = <1>;
+		vactive = <480>;
+		vback-porch = <35>;
+		vfront-porch = <10>;
+		vsync-len = <1>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/firmware/meson/meson_sm.txt b/Documentation/devicetree/bindings/firmware/meson/meson_sm.txt
new file mode 100644
index 0000000..c248cd4
--- /dev/null
+++ b/Documentation/devicetree/bindings/firmware/meson/meson_sm.txt
@@ -0,0 +1,15 @@
+* Amlogic Secure Monitor
+
+In the Amlogic SoCs the Secure Monitor code is used to provide access to the
+NVMEM, enable JTAG, set USB boot, etc...
+
+Required properties for the secure monitor node:
+- compatible: Should be "amlogic,meson-gxbb-sm"
+
+Example:
+
+	firmware {
+		sm: secure-monitor {
+			compatible = "amlogic,meson-gxbb-sm";
+		};
+	};
diff --git a/Documentation/devicetree/bindings/media/meson-ir.txt b/Documentation/devicetree/bindings/media/meson-ir.txt
index 407848e..e7e3f3c 100644
--- a/Documentation/devicetree/bindings/media/meson-ir.txt
+++ b/Documentation/devicetree/bindings/media/meson-ir.txt
@@ -1,7 +1,10 @@
 * Amlogic Meson IR remote control receiver
 
 Required properties:
- - compatible	: should be "amlogic,meson6-ir"
+ - compatible	: depending on the platform this should be one of:
+		  - "amlogic,meson6-ir"
+		  - "amlogic,meson8b-ir"
+		  - "amlogic,meson-gxbb-ir"
  - reg		: physical base address and length of the device registers
  - interrupts	: a single specifier for the interrupt from the device
 
diff --git a/Documentation/devicetree/bindings/net/brcm,amac.txt b/Documentation/devicetree/bindings/net/brcm,amac.txt
new file mode 100644
index 0000000..ba5ecc1
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/brcm,amac.txt
@@ -0,0 +1,24 @@
+Broadcom AMAC Ethernet Controller Device Tree Bindings
+-------------------------------------------------------------
+
+Required properties:
+ - compatible:	"brcm,amac" or "brcm,nsp-amac"
+ - reg:		Address and length of the GMAC registers,
+		Address and length of the GMAC IDM registers
+ - reg-names:	Names of the registers.  Must have both "amac_base" and
+		"idm_base"
+ - interrupts:	Interrupt number
+
+Optional properties:
+- mac-address:	See ethernet.txt file in the same directory
+
+Examples:
+
+amac0: ethernet@18022000 {
+	compatible = "brcm,nsp-amac";
+	reg = <0x18022000 0x1000>,
+	      <0x18110000 0x1000>;
+	reg-names = "amac_base", "idm_base";
+	interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+	status = "disabled";
+};
diff --git a/Documentation/devicetree/bindings/net/brcm,bgmac-nsp.txt b/Documentation/devicetree/bindings/net/brcm,bgmac-nsp.txt
new file mode 100644
index 0000000..022946c
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/brcm,bgmac-nsp.txt
@@ -0,0 +1,24 @@
+Broadcom GMAC Ethernet Controller Device Tree Bindings
+-------------------------------------------------------------
+
+Required properties:
+ - compatible:	"brcm,bgmac-nsp"
+ - reg:		Address and length of the GMAC registers,
+		Address and length of the GMAC IDM registers
+ - reg-names:	Names of the registers.  Must have both "gmac_base" and
+		"idm_base"
+ - interrupts:	Interrupt number
+
+Optional properties:
+- mac-address:	See ethernet.txt file in the same directory
+
+Examples:
+
+gmac0: ethernet@18022000 {
+	compatible = "brcm,bgmac-nsp";
+	reg = <0x18022000 0x1000>,
+	      <0x18110000 0x1000>;
+	reg-names = "gmac_base", "idm_base";
+	interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+	status = "disabled";
+};
diff --git a/Documentation/devicetree/bindings/net/meson-dwmac.txt b/Documentation/devicetree/bindings/net/meson-dwmac.txt
index ec633d7..89e62dd 100644
--- a/Documentation/devicetree/bindings/net/meson-dwmac.txt
+++ b/Documentation/devicetree/bindings/net/meson-dwmac.txt
@@ -1,18 +1,32 @@
 * Amlogic Meson DWMAC Ethernet controller
 
 The device inherits all the properties of the dwmac/stmmac devices
-described in the file net/stmmac.txt with the following changes.
+described in the file stmmac.txt in the current directory with the
+following changes.
 
-Required properties:
+Required properties on all platforms:
 
-- compatible: should be "amlogic,meson6-dwmac" along with "snps,dwmac"
-	      and any applicable more detailed version number
-	      described in net/stmmac.txt
+- compatible:	Depending on the platform this should be one of:
+			- "amlogic,meson6-dwmac"
+			- "amlogic,meson8b-dwmac"
+			- "amlogic,meson-gxbb-dwmac"
+		Additionally "snps,dwmac" and any applicable more
+		detailed version number described in net/stmmac.txt
+		should be used.
 
-- reg: should contain a register range for the dwmac controller and
-       another one for the Amlogic specific configuration
+- reg:	The first register range should be the one of the DWMAC
+	controller. The second range is is for the Amlogic specific
+	configuration (for example the PRG_ETHERNET register range
+	on Meson8b and newer)
 
-Example:
+Required properties on Meson8b and newer:
+- clock-names:	Should contain the following:
+		- "stmmaceth" - see stmmac.txt
+		- "clkin0" - first parent clock of the internal mux
+		- "clkin1" - second parent clock of the internal mux
+
+
+Example for Meson6:
 
 	ethmac: ethernet@c9410000 {
 		compatible = "amlogic,meson6-dwmac", "snps,dwmac";
@@ -23,3 +37,18 @@
 		clocks = <&clk81>;
 		clock-names = "stmmaceth";
 	}
+
+Example for GXBB:
+	ethmac: ethernet@c9410000 {
+		compatible = "amlogic,meson-gxbb-dwmac", "snps,dwmac";
+		reg = <0x0 0xc9410000 0x0 0x10000>,
+			<0x0 0xc8834540 0x0 0x8>;
+		interrupts = <0 8 1>;
+		interrupt-names = "macirq";
+		clocks = <&clkc CLKID_ETH>,
+				<&clkc CLKID_FCLK_DIV2>,
+				<&clkc CLKID_MPLL2>;
+		clock-names = "stmmaceth", "clkin0", "clkin1";
+		phy-mode = "rgmii";
+		status = "disabled";
+	};
diff --git a/Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt b/Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt
new file mode 100644
index 0000000..fafd85b
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt
@@ -0,0 +1,39 @@
+= Amlogic eFuse device tree bindings =
+
+Required properties:
+- compatible: should be "amlogic,meson-gxbb-efuse"
+
+= Data cells =
+Are child nodes of eFuse, bindings of which as described in
+bindings/nvmem/nvmem.txt
+
+Example:
+
+	efuse: efuse {
+		compatible = "amlogic,meson-gxbb-efuse";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		sn: sn@14 {
+			reg = <0x14 0x10>;
+		};
+
+		eth_mac: eth_mac@34 {
+			reg = <0x34 0x10>;
+		};
+
+		bid: bid@46 {
+			reg = <0x46 0x30>;
+		};
+	};
+
+= Data consumers =
+Are device nodes which consume nvmem data cells.
+
+For example:
+
+	eth_mac {
+		...
+		nvmem-cells = <&eth_mac>;
+		nvmem-cell-names = "eth_mac";
+	};
diff --git a/Documentation/devicetree/bindings/perf/apm-xgene-pmu.txt b/Documentation/devicetree/bindings/perf/apm-xgene-pmu.txt
new file mode 100644
index 0000000..afb11cf
--- /dev/null
+++ b/Documentation/devicetree/bindings/perf/apm-xgene-pmu.txt
@@ -0,0 +1,112 @@
+* APM X-Gene SoC PMU bindings
+
+This is APM X-Gene SoC PMU (Performance Monitoring Unit) module.
+The following PMU devices are supported:
+
+  L3C			- L3 cache controller
+  IOB			- IO bridge
+  MCB			- Memory controller bridge
+  MC			- Memory controller
+
+The following section describes the SoC PMU DT node binding.
+
+Required properties:
+- compatible		: Shall be "apm,xgene-pmu" for revision 1 or
+                          "apm,xgene-pmu-v2" for revision 2.
+- regmap-csw		: Regmap of the CPU switch fabric (CSW) resource.
+- regmap-mcba		: Regmap of the MCB-A (memory bridge) resource.
+- regmap-mcbb		: Regmap of the MCB-B (memory bridge) resource.
+- reg			: First resource shall be the CPU bus PMU resource.
+- interrupts            : Interrupt-specifier for PMU IRQ.
+
+Required properties for L3C subnode:
+- compatible		: Shall be "apm,xgene-pmu-l3c".
+- reg			: First resource shall be the L3C PMU resource.
+
+Required properties for IOB subnode:
+- compatible		: Shall be "apm,xgene-pmu-iob".
+- reg			: First resource shall be the IOB PMU resource.
+
+Required properties for MCB subnode:
+- compatible		: Shall be "apm,xgene-pmu-mcb".
+- reg			: First resource shall be the MCB PMU resource.
+- enable-bit-index	: The bit indicates if the according MCB is enabled.
+
+Required properties for MC subnode:
+- compatible		: Shall be "apm,xgene-pmu-mc".
+- reg			: First resource shall be the MC PMU resource.
+- enable-bit-index	: The bit indicates if the according MC is enabled.
+
+Example:
+	csw: csw@7e200000 {
+		compatible = "apm,xgene-csw", "syscon";
+		reg = <0x0 0x7e200000 0x0 0x1000>;
+	};
+
+	mcba: mcba@7e700000 {
+		compatible = "apm,xgene-mcb", "syscon";
+		reg = <0x0 0x7e700000 0x0 0x1000>;
+	};
+
+	mcbb: mcbb@7e720000 {
+		compatible = "apm,xgene-mcb", "syscon";
+		reg = <0x0 0x7e720000 0x0 0x1000>;
+	};
+
+	pmu: pmu@78810000 {
+		compatible = "apm,xgene-pmu-v2";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		regmap-csw = <&csw>;
+		regmap-mcba = <&mcba>;
+		regmap-mcbb = <&mcbb>;
+		reg = <0x0 0x78810000 0x0 0x1000>;
+		interrupts = <0x0 0x22 0x4>;
+
+		pmul3c@7e610000 {
+			compatible = "apm,xgene-pmu-l3c";
+			reg = <0x0 0x7e610000 0x0 0x1000>;
+		};
+
+		pmuiob@7e940000 {
+			compatible = "apm,xgene-pmu-iob";
+			reg = <0x0 0x7e940000 0x0 0x1000>;
+		};
+
+		pmucmcb@7e710000 {
+			compatible = "apm,xgene-pmu-mcb";
+			reg = <0x0 0x7e710000 0x0 0x1000>;
+			enable-bit-index = <0>;
+		};
+
+		pmucmcb@7e730000 {
+			compatible = "apm,xgene-pmu-mcb";
+			reg = <0x0 0x7e730000 0x0 0x1000>;
+			enable-bit-index = <1>;
+		};
+
+		pmucmc@7e810000 {
+			compatible = "apm,xgene-pmu-mc";
+			reg = <0x0 0x7e810000 0x0 0x1000>;
+			enable-bit-index = <0>;
+		};
+
+		pmucmc@7e850000 {
+			compatible = "apm,xgene-pmu-mc";
+			reg = <0x0 0x7e850000 0x0 0x1000>;
+			enable-bit-index = <1>;
+		};
+
+		pmucmc@7e890000 {
+			compatible = "apm,xgene-pmu-mc";
+			reg = <0x0 0x7e890000 0x0 0x1000>;
+			enable-bit-index = <2>;
+		};
+
+		pmucmc@7e8d0000 {
+			compatible = "apm,xgene-pmu-mc";
+			reg = <0x0 0x7e8d0000 0x0 0x1000>;
+			enable-bit-index = <3>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/phy/meson-usb2-phy.txt b/Documentation/devicetree/bindings/phy/meson-usb2-phy.txt
new file mode 100644
index 0000000..9da5ea2
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/meson-usb2-phy.txt
@@ -0,0 +1,27 @@
+* Amlogic USB2 PHY
+
+Required properties:
+- compatible:	Depending on the platform this should be one of:
+	"amlogic,meson8b-usb2-phy"
+	"amlogic,meson-gxbb-usb2-phy"
+- reg:		The base address and length of the registers
+- #phys-cells:	should be 0 (see phy-bindings.txt in this directory)
+- clocks:	phandle and clock identifier for the phy clocks
+- clock-names:	"usb_general" and "usb"
+
+Optional properties:
+- resets:	reference to the reset controller
+- phy-supply:	see phy-bindings.txt in this directory
+
+
+Example:
+
+usb0_phy: usb_phy@0 {
+	compatible = "amlogic,meson-gxbb-usb2-phy";
+	#phy-cells = <0>;
+	reg = <0x0 0x0 0x0 0x20>;
+	resets = <&reset RESET_USB_OTG>;
+	clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB0>;
+	clock-names = "usb_general", "usb";
+	phy-supply = <&usb_vbus>;
+};
diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,orion-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,orion-pinctrl.txt
index 27570a3..ec8aa3c 100644
--- a/Documentation/devicetree/bindings/pinctrl/marvell,orion-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/marvell,orion-pinctrl.txt
@@ -4,7 +4,9 @@
 part and usage.
 
 Required properties:
-- compatible: "marvell,88f5181l-pinctrl", "marvell,88f5182-pinctrl",
+- compatible: "marvell,88f5181-pinctrl",
+              "marvell,88f5181l-pinctrl",
+              "marvell,88f5182-pinctrl",
               "marvell,88f5281-pinctrl"
 
 - reg: two register areas, the first one describing the first two
diff --git a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
index 6db16b9..d49e22d 100644
--- a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
@@ -229,6 +229,8 @@
 
 Example 1: A pin-controller node with pin groups.
 
+	#include <dt-bindings/pinctrl/samsung.h>
+
 	pinctrl_0: pinctrl@11400000 {
 		compatible = "samsung,exynos4210-pinctrl";
 		reg = <0x11400000 0x1000>;
@@ -238,53 +240,53 @@
 
 		uart0_data: uart0-data {
 			samsung,pins = "gpa0-0", "gpa0-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		uart0_fctl: uart0-fctl {
 			samsung,pins = "gpa0-2", "gpa0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		uart1_data: uart1-data {
 			samsung,pins = "gpa0-4", "gpa0-5";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		uart1_fctl: uart1-fctl {
 			samsung,pins = "gpa0-6", "gpa0-7";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		i2c2_bus: i2c2-bus {
 			samsung,pins = "gpa0-6", "gpa0-7";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		sd4_bus8: sd4-bus-width8 {
 			part-1 {
 				samsung,pins = "gpk0-3", "gpk0-4",
 						"gpk0-5", "gpk0-6";
-				samsung,pin-function = <3>;
-				samsung,pin-pud = <3>;
-				samsung,pin-drv = <3>;
+				samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+				samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+				samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 			};
 			part-2 {
 				samsung,pins = "gpk1-3", "gpk1-4",
 						"gpk1-5", "gpk1-6";
-				samsung,pin-function = <4>;
-				samsung,pin-pud = <4>;
-				samsung,pin-drv = <3>;
+				samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+				samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+				samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 			};
 		};
 	};
diff --git a/Documentation/devicetree/bindings/reset/st,stm32-rcc.txt b/Documentation/devicetree/bindings/reset/st,stm32-rcc.txt
new file mode 100644
index 0000000..01db343
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/st,stm32-rcc.txt
@@ -0,0 +1,6 @@
+STMicroelectronics STM32 Peripheral Reset Controller
+====================================================
+
+The RCC IP is both a reset and a clock controller.
+
+Please see Documentation/devicetree/bindings/clock/st,stm32-rcc.txt
diff --git a/Documentation/devicetree/bindings/reset/uniphier-reset.txt b/Documentation/devicetree/bindings/reset/uniphier-reset.txt
new file mode 100644
index 0000000..e6bbfcc
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/uniphier-reset.txt
@@ -0,0 +1,93 @@
+UniPhier reset controller
+
+
+System reset
+------------
+
+Required properties:
+- compatible: should be one of the following:
+    "socionext,uniphier-sld3-reset" - for PH1-sLD3 SoC.
+    "socionext,uniphier-ld4-reset"  - for PH1-LD4 SoC.
+    "socionext,uniphier-pro4-reset" - for PH1-Pro4 SoC.
+    "socionext,uniphier-sld8-reset" - for PH1-sLD8 SoC.
+    "socionext,uniphier-pro5-reset" - for PH1-Pro5 SoC.
+    "socionext,uniphier-pxs2-reset" - for ProXstream2/PH1-LD6b SoC.
+    "socionext,uniphier-ld11-reset" - for PH1-LD11 SoC.
+    "socionext,uniphier-ld20-reset" - for PH1-LD20 SoC.
+- #reset-cells: should be 1.
+
+Example:
+
+	sysctrl@61840000 {
+		compatible = "socionext,uniphier-ld20-sysctrl",
+			     "simple-mfd", "syscon";
+		reg = <0x61840000 0x4000>;
+
+		reset {
+			compatible = "socionext,uniphier-ld20-reset";
+			#reset-cells = <1>;
+		};
+
+		other nodes ...
+	};
+
+
+Media I/O (MIO) reset
+---------------------
+
+Required properties:
+- compatible: should be one of the following:
+    "socionext,uniphier-sld3-mio-reset" - for PH1-sLD3 SoC.
+    "socionext,uniphier-ld4-mio-reset"  - for PH1-LD4 SoC.
+    "socionext,uniphier-pro4-mio-reset" - for PH1-Pro4 SoC.
+    "socionext,uniphier-sld8-mio-reset" - for PH1-sLD8 SoC.
+    "socionext,uniphier-pro5-mio-reset" - for PH1-Pro5 SoC.
+    "socionext,uniphier-pxs2-mio-reset" - for ProXstream2/PH1-LD6b SoC.
+    "socionext,uniphier-ld11-mio-reset" - for PH1-LD11 SoC.
+    "socionext,uniphier-ld20-mio-reset" - for PH1-LD20 SoC.
+- #reset-cells: should be 1.
+
+Example:
+
+	mioctrl@59810000 {
+		compatible = "socionext,uniphier-ld20-mioctrl",
+			     "simple-mfd", "syscon";
+		reg = <0x59810000 0x800>;
+
+		reset {
+			compatible = "socionext,uniphier-ld20-mio-reset";
+			#reset-cells = <1>;
+		};
+
+		other nodes ...
+	};
+
+
+Peripheral reset
+----------------
+
+Required properties:
+- compatible: should be one of the following:
+    "socionext,uniphier-ld4-peri-reset"  - for PH1-LD4 SoC.
+    "socionext,uniphier-pro4-peri-reset" - for PH1-Pro4 SoC.
+    "socionext,uniphier-sld8-peri-reset" - for PH1-sLD8 SoC.
+    "socionext,uniphier-pro5-peri-reset" - for PH1-Pro5 SoC.
+    "socionext,uniphier-pxs2-peri-reset" - for ProXstream2/PH1-LD6b SoC.
+    "socionext,uniphier-ld11-peri-reset" - for PH1-LD11 SoC.
+    "socionext,uniphier-ld20-peri-reset" - for PH1-LD20 SoC.
+- #reset-cells: should be 1.
+
+Example:
+
+	perictrl@59820000 {
+		compatible = "socionext,uniphier-ld20-perictrl",
+			     "simple-mfd", "syscon";
+		reg = <0x59820000 0x200>;
+
+		reset {
+			compatible = "socionext,uniphier-ld20-peri-reset";
+			#reset-cells = <1>;
+		};
+
+		other nodes ...
+	};
diff --git a/Documentation/devicetree/bindings/usb/dwc2.txt b/Documentation/devicetree/bindings/usb/dwc2.txt
index 7d16ebf..455f2c3 100644
--- a/Documentation/devicetree/bindings/usb/dwc2.txt
+++ b/Documentation/devicetree/bindings/usb/dwc2.txt
@@ -10,6 +10,8 @@
   - "rockchip,rk3288-usb", "rockchip,rk3066-usb", "snps,dwc2": for rk3288 Soc;
   - "lantiq,arx100-usb": The DWC2 USB controller instance in Lantiq ARX SoCs;
   - "lantiq,xrx200-usb": The DWC2 USB controller instance in Lantiq XRX SoCs;
+  - "amlogic,meson8b-usb": The DWC2 USB controller instance in Amlogic Meson8b SoCs;
+  - "amlogic,meson-gxbb-usb": The DWC2 USB controller instance in Amlogic S905 SoCs;
   - snps,dwc2: A generic DWC2 USB controller with default parameters.
 - reg : Should contain 1 register range (address and length)
 - interrupts : Should contain 1 interrupt
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 77e985f..24c6f65 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -101,6 +101,7 @@
 fcs	Fairchild Semiconductor
 firefly	Firefly
 focaltech	FocalTech Systems Co.,Ltd
+friendlyarm	Guangzhou FriendlyARM Computer Tech Co., Ltd
 fsl	Freescale Semiconductor
 ge	General Electric Company
 geekbuying	GeekBuying
@@ -137,6 +138,7 @@
 intel	Intel Corporation
 intercontrol	Inter Control Group
 invensense	InvenSense Inc.
+inversepath	Inverse Path
 iom	Iomega Corporation
 isee	ISEE 2007 S.L.
 isil	Intersil
@@ -280,6 +282,7 @@
 toumaz	Toumaz
 tpk	TPK U.S.A. LLC
 tplink	TP-LINK Technologies Co., Ltd.
+tpo	TPO
 tronfy	Tronfy
 tronsmart	Tronsmart
 truly	Truly Semiconductors Limited
diff --git a/Documentation/perf/xgene-pmu.txt b/Documentation/perf/xgene-pmu.txt
new file mode 100644
index 0000000..d7cff44
--- /dev/null
+++ b/Documentation/perf/xgene-pmu.txt
@@ -0,0 +1,48 @@
+APM X-Gene SoC Performance Monitoring Unit (PMU)
+================================================
+
+X-Gene SoC PMU consists of various independent system device PMUs such as
+L3 cache(s), I/O bridge(s), memory controller bridge(s) and memory
+controller(s). These PMU devices are loosely architected to follow the
+same model as the PMU for ARM cores. The PMUs share the same top level
+interrupt and status CSR region.
+
+PMU (perf) driver
+-----------------
+
+The xgene-pmu driver registers several perf PMU drivers. Each of the perf
+driver provides description of its available events and configuration options
+in sysfs, see /sys/devices/<l3cX/iobX/mcbX/mcX>/.
+
+The "format" directory describes format of the config (event ID),
+config1 (agent ID) fields of the perf_event_attr structure. The "events"
+directory provides configuration templates for all supported event types that
+can be used with perf tool. For example, "l3c0/bank-fifo-full/" is an
+equivalent of "l3c0/config=0x0b/".
+
+Most of the SoC PMU has a specific list of agent ID used for monitoring
+performance of a specific datapath. For example, agents of a L3 cache can be
+a specific CPU or an I/O bridge. Each PMU has a set of 2 registers capable of
+masking the agents from which the request come from. If the bit with
+the bit number corresponding to the agent is set, the event is counted only if
+it is caused by a request from that agent. Each agent ID bit is inversely mapped
+to a corresponding bit in "config1" field. By default, the event will be
+counted for all agent requests (config1 = 0x0). For all the supported agents of
+each PMU, please refer to APM X-Gene User Manual.
+
+Each perf driver also provides a "cpumask" sysfs attribute, which contains a
+single CPU ID of the processor which will be used to handle all the PMU events.
+
+Example for perf tool use:
+
+ / # perf list | grep -e l3c -e iob -e mcb -e mc
+   l3c0/ackq-full/                                    [Kernel PMU event]
+ <...>
+   mcb1/mcb-csw-stall/                                [Kernel PMU event]
+
+ / # perf stat -a -e l3c0/read-miss/,mcb1/csw-write-request/ sleep 1
+
+ / # perf stat -a -e l3c0/read-miss,config1=0xfffffffffffffffe/ sleep 1
+
+The driver does not support sampling, therefore "perf record" will
+not work. Per-task (without "-a") perf sessions are not supported.
diff --git a/Documentation/powerpc/syscall64-abi.txt b/Documentation/powerpc/syscall64-abi.txt
new file mode 100644
index 0000000..fa716a0
--- /dev/null
+++ b/Documentation/powerpc/syscall64-abi.txt
@@ -0,0 +1,105 @@
+===============================================
+Power Architecture 64-bit Linux system call ABI
+===============================================
+
+syscall
+=======
+
+syscall calling sequence[*] matches the Power Architecture 64-bit ELF ABI
+specification C function calling sequence, including register preservation
+rules, with the following differences.
+
+[*] Some syscalls (typically low-level management functions) may have
+    different calling sequences (e.g., rt_sigreturn).
+
+Parameters and return value
+---------------------------
+The system call number is specified in r0.
+
+There is a maximum of 6 integer parameters to a syscall, passed in r3-r8.
+
+Both a return value and a return error code are returned. cr0.SO is the return
+error code, and r3 is the return value or error code. When cr0.SO is clear,
+the syscall succeeded and r3 is the return value. When cr0.SO is set, the
+syscall failed and r3 is the error code that generally corresponds to errno.
+
+Stack
+-----
+System calls do not modify the caller's stack frame. For example, the caller's
+stack frame LR and CR save fields are not used.
+
+Register preservation rules
+---------------------------
+Register preservation rules match the ELF ABI calling sequence with the
+following differences:
+
+r0:         Volatile.   (System call number.)
+r3:         Volatile.   (Parameter 1, and return value.)
+r4-r8:      Volatile.   (Parameters 2-6.)
+cr0:        Volatile    (cr0.SO is the return error condition)
+cr1, cr5-7: Nonvolatile.
+lr:         Nonvolatile.
+
+All floating point and vector data registers as well as control and status
+registers are nonvolatile.
+
+Invocation
+----------
+The syscall is performed with the sc instruction, and returns with execution
+continuing at the instruction following the sc instruction.
+
+Transactional Memory
+--------------------
+Syscall behavior can change if the processor is in transactional or suspended
+transaction state, and the syscall can affect the behavior of the transaction.
+
+If the processor is in suspended state when a syscall is made, the syscall
+will be performed as normal, and will return as normal. The syscall will be
+performed in suspended state, so its side effects will be persistent according
+to the usual transactional memory semantics. A syscall may or may not result
+in the transaction being doomed by hardware.
+
+If the processor is in transactional state when a syscall is made, then the
+behavior depends on the presence of PPC_FEATURE2_HTM_NOSC in the AT_HWCAP2 ELF
+auxiliary vector.
+
+- If present, which is the case for newer kernels, then the syscall will not
+  be performed and the transaction will be doomed by the kernel with the
+  failure code TM_CAUSE_SYSCALL | TM_CAUSE_PERSISTENT in the TEXASR SPR.
+
+- If not present (older kernels), then the kernel will suspend the
+  transactional state and the syscall will proceed as in the case of a
+  suspended state syscall, and will resume the transactional state before
+  returning to the caller. This case is not well defined or supported, so this
+  behavior should not be relied upon.
+
+
+vsyscall
+========
+
+vsyscall calling sequence matches the syscall calling sequence, with the
+following differences. Some vsyscalls may have different calling sequences.
+
+Parameters and return value
+---------------------------
+r0 is not used as an input. The vsyscall is selected by its address.
+
+Stack
+-----
+The vsyscall may or may not use the caller's stack frame save areas.
+
+Register preservation rules
+---------------------------
+r0: Volatile.
+cr1, cr5-7: Volatile.
+lr: Volatile.
+
+Invocation
+----------
+The vsyscall is performed with a branch-with-link instruction to the vsyscall
+function address.
+
+Transactional Memory
+--------------------
+vsyscalls will run in the same transactional state as the caller. A vsyscall
+may or may not result in the transaction being doomed by hardware.
diff --git a/MAINTAINERS b/MAINTAINERS
index 2556558..5327bbe 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -866,6 +866,13 @@
 F:	Documentation/devicetree/bindings/net/apm-xgene-enet.txt
 F:	Documentation/devicetree/bindings/net/apm-xgene-mdio.txt
 
+APPLIED MICRO (APM) X-GENE SOC PMU
+M:	Tai Nguyen <ttnguyen@apm.com>
+S:	Supported
+F:	drivers/perf/xgene_pmu.c
+F:	Documentation/perf/xgene-pmu.txt
+F:	Documentation/devicetree/bindings/perf/apm-xgene-pmu.txt
+
 APTINA CAMERA SENSOR PLL
 M:	Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
 L:	linux-media@vger.kernel.org
@@ -1003,6 +1010,7 @@
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 N:	sun[x456789]i
+F:	arch/arm/boot/dts/ntc-gr8*
 
 ARM/Allwinner SoC Clock Support
 M:	Emilio López <emilio@elopez.com.ar>
@@ -1459,6 +1467,7 @@
 ARM/OXNAS platform support
 M:	Neil Armstrong <narmstrong@baylibre.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+L:	linux-oxnas@lists.tuxfamily.org (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm/mach-oxnas/
 F:	arch/arm/boot/dts/oxnas*
@@ -1859,6 +1868,7 @@
 F:	drivers/clk/uniphier/
 F:	drivers/i2c/busses/i2c-uniphier*
 F:	drivers/pinctrl/uniphier/
+F:	drivers/reset/reset-uniphier.c
 F:	drivers/tty/serial/8250/8250_uniphier.c
 N:	uniphier
 
@@ -2472,6 +2482,7 @@
 S:	Maintained
 F:	block/
 F:	kernel/trace/blktrace.c
+F:	lib/sbitmap.c
 
 BLOCK2MTD DRIVER
 M:	Joern Engel <joern@lazybastard.org>
@@ -2595,6 +2606,13 @@
 F:	arch/arm/boot/dts/bcm5301x*.dtsi
 F:	arch/arm/boot/dts/bcm470*
 
+BROADCOM BCM53573 ARM ARCHITECTURE
+M:	Rafał Miłecki <rafal@milecki.pl>
+L:	linux-arm-kernel@lists.infradead.org
+S:	Maintained
+F:	arch/arm/boot/dts/bcm53573*
+F:	arch/arm/boot/dts/bcm47189*
+
 BROADCOM BCM63XX ARM ARCHITECTURE
 M:	Florian Fainelli <f.fainelli@gmail.com>
 M:	bcm-kernel-feedback-list@broadcom.com
@@ -3522,14 +3540,14 @@
 
 CXL (IBM Coherent Accelerator Processor Interface CAPI) DRIVER
 M:	Ian Munsie <imunsie@au1.ibm.com>
-M:	Michael Neuling <mikey@neuling.org>
+M:	Frederic Barrat <fbarrat@linux.vnet.ibm.com>
 L:	linuxppc-dev@lists.ozlabs.org
 S:	Supported
+F:	arch/powerpc/platforms/powernv/pci-cxl.c
 F:	drivers/misc/cxl/
 F:	include/misc/cxl*
 F:	include/uapi/misc/cxl.h
 F:	Documentation/powerpc/cxl.txt
-F:	Documentation/powerpc/cxl.txt
 F:	Documentation/ABI/testing/sysfs-class-cxl
 
 CXLFLASH (IBM Coherent Accelerator Processor Interface CAPI Flash) SCSI DRIVER
@@ -9435,6 +9453,8 @@
 L:	linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
 S:	Maintained
 F:	drivers/pinctrl/samsung/
+F:	include/dt-bindings/pinctrl/samsung.h
+F:	Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
 
 PIN CONTROLLER - SINGLE
 M:	Tony Lindgren <tony@atomide.com>
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index c297bc5..b5d529f 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -278,10 +278,9 @@
 			ARCH_INTEGRATOR || \
 			ARCH_IOP13XX || \
 			ARCH_KS8695 || \
-			(ARCH_REALVIEW && !REALVIEW_HIGH_PHYS_OFFSET)
+			ARCH_REALVIEW
 	default 0x10000000 if ARCH_OMAP1 || ARCH_RPC
 	default 0x20000000 if ARCH_S5PV210
-	default 0x70000000 if REALVIEW_HIGH_PHYS_OFFSET
 	default 0xc0000000 if ARCH_SA1100
 	help
 	  Please provide the physical address corresponding to the
@@ -337,6 +336,7 @@
 	select GENERIC_CLOCKEVENTS
 	select MIGHT_HAVE_PCI
 	select MULTI_IRQ_HANDLER
+	select PCI_DOMAINS if PCI
 	select SPARSE_IRQ
 	select USE_OF
 
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index a9693b6..d83f7c3 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -186,10 +186,11 @@
 	config DEBUG_BRCMSTB_UART
 		bool "Use BRCMSTB UART for low-level debug"
 		depends on ARCH_BRCMSTB
-		select DEBUG_UART_8250
 		help
 		  Say Y here if you want the debug print routines to direct
-		  their output to the first serial port on these devices.
+		  their output to the first serial port on these devices. The
+		  UART physical and virtual address is automatically provided
+		  based on the chip identification register value.
 
 		  If you have a Broadcom STB chip and would like early print
 		  messages to appear over the UART, select this option.
@@ -861,12 +862,12 @@
 		  via SCIF2 on Renesas R-Car H1 (R8A7779).
 
 	config DEBUG_RCAR_GEN2_SCIF0
-		bool "Kernel low-level debugging messages via SCIF0 on R8A7790/R8A7791/R8A7793"
-		depends on ARCH_R8A7790 || ARCH_R8A7791 || ARCH_R8A7793
+		bool "Kernel low-level debugging messages via SCIF0 on R8A7790/R8A7791/R8A7792/R8A7793"
+		depends on ARCH_R8A7790 || ARCH_R8A7791 || ARCH_R8A7792 || ARCH_R8A7793
 		help
 		  Say Y here if you want kernel low-level debugging support
-		  via SCIF0 on Renesas R-Car H2 (R8A7790), M2-W (R8A7791), or
-		  M2-N (R8A7793).
+		  via SCIF0 on Renesas R-Car H2 (R8A7790), M2-W (R8A7791), V2H
+		  (R8A7792), or M2-N (R8A7793).
 
 	config DEBUG_RCAR_GEN2_SCIF2
 		bool "Kernel low-level debugging messages via SCIF2 on R8A7794"
@@ -1430,6 +1431,7 @@
 	default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1
 	default "debug/bcm63xx.S" if DEBUG_BCM63XX_UART
 	default "debug/digicolor.S" if DEBUG_DIGICOLOR_UA0
+	default "debug/brcmstb.S" if DEBUG_BRCMSTB_UART
 	default "mach/debug-macro.S"
 
 # Compatibility options for PL01x
@@ -1520,7 +1522,6 @@
 	default 0xe6e60000 if DEBUG_RCAR_GEN2_SCIF0
 	default 0xe8008000 if DEBUG_R7S72100_SCIF2
 	default 0xf0000be0 if ARCH_EBSA110
-	default 0xf040ab00 if DEBUG_BRCMSTB_UART
 	default 0xf1012000 if DEBUG_MVEBU_UART0_ALTERNATE
 	default 0xf1012100 if DEBUG_MVEBU_UART1_ALTERNATE
 	default 0xf7fc9000 if DEBUG_BERLIN_UART
@@ -1604,7 +1605,6 @@
 	default 0xfb009000 if DEBUG_REALVIEW_STD_PORT
 	default 0xfb00c000 if DEBUG_AT91_SAMA5D4_USART3
 	default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT
-	default 0xfc40ab00 if DEBUG_BRCMSTB_UART
 	default 0xfc705000 if DEBUG_ZTE_ZX
 	default 0xfcfe8600 if DEBUG_BCM63XX_UART
 	default 0xfd000000 if DEBUG_SPEAR3XX || DEBUG_SPEAR13XX
@@ -1677,8 +1677,7 @@
 		DEBUG_ALPINE_UART0 || \
 		DEBUG_DAVINCI_DMx_UART0 || DEBUG_DAVINCI_DA8XX_UART1 || \
 		DEBUG_DAVINCI_DA8XX_UART2 || \
-		DEBUG_BCM_KONA_UART || DEBUG_RK32_UART2 || \
-		DEBUG_BRCMSTB_UART
+		DEBUG_BCM_KONA_UART || DEBUG_RK32_UART2
 
 config DEBUG_UART_8250_PALMCHIP
 	bool "8250 UART is Palmchip BK-310x"
@@ -1697,7 +1696,8 @@
 	bool
 	depends on ARCH_MULTIPLATFORM || PLAT_SAMSUNG || ARM_SINGLE_ARMV7M
 	default y if DEBUG_LL && !DEBUG_OMAP2PLUS_UART && \
-		     (!DEBUG_TEGRA_UART || !ZBOOT_ROM)
+		     (!DEBUG_TEGRA_UART || !ZBOOT_ROM) && \
+		     !DEBUG_BRCMSTB_UART
 	help
 	  This option influences the normal decompressor output for
 	  multiplatform kernels.  Normally, multiplatform kernels disable
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index faacd52..befcd26 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -69,7 +69,8 @@
 	bcm2835-rpi-b-rev2.dtb \
 	bcm2835-rpi-b-plus.dtb \
 	bcm2835-rpi-a-plus.dtb \
-	bcm2836-rpi-2-b.dtb
+	bcm2836-rpi-2-b.dtb \
+	bcm2835-rpi-zero.dtb
 dtb-$(CONFIG_ARCH_BCM_5301X) += \
 	bcm4708-asus-rt-ac56u.dtb \
 	bcm4708-asus-rt-ac68u.dtb \
@@ -102,8 +103,13 @@
 	bcm21664-garnet.dtb \
 	bcm23550-sparrow.dtb
 dtb-$(CONFIG_ARCH_BCM_NSP) += \
+	bcm958522er.dtb \
+	bcm958525er.dtb \
 	bcm958525xmc.dtb \
+	bcm958622hr.dtb \
+	bcm958623hr.dtb \
 	bcm958625hr.dtb \
+	bcm988312hr.dtb \
 	bcm958625k.dtb
 dtb-$(CONFIG_ARCH_BERLIN) += \
 	berlin2-sony-nsz-gs7.dtb \
@@ -114,6 +120,7 @@
 dtb-$(CONFIG_ARCH_CLPS711X) += \
 	ep7211-edb7211.dtb
 dtb-$(CONFIG_ARCH_DAVINCI) += \
+	da850-lcdk.dtb \
 	da850-enbw-cmc.dtb \
 	da850-evm.dtb
 dtb-$(CONFIG_ARCH_DIGICOLOR) += \
@@ -315,6 +322,7 @@
 	imx53-smd.dtb \
 	imx53-tx53-x03x.dtb \
 	imx53-tx53-x13x.dtb \
+	imx53-usbarmory.dtb \
 	imx53-voipac-bsb.dtb
 dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6dl-apf6dev.dtb \
@@ -330,6 +338,7 @@
 	imx6dl-gw54xx.dtb \
 	imx6dl-gw551x.dtb \
 	imx6dl-gw552x.dtb \
+	imx6dl-gw553x.dtb \
 	imx6dl-hummingboard.dtb \
 	imx6dl-nit6xlite.dtb \
 	imx6dl-nitrogen6x.dtb \
@@ -339,6 +348,7 @@
 	imx6dl-sabreauto.dtb \
 	imx6dl-sabrelite.dtb \
 	imx6dl-sabresd.dtb \
+	imx6dl-ts4900.dtb \
 	imx6dl-tx6dl-comtft.dtb \
 	imx6dl-tx6s-8034.dtb \
 	imx6dl-tx6s-8035.dtb \
@@ -368,6 +378,7 @@
 	imx6q-gw54xx.dtb \
 	imx6q-gw551x.dtb \
 	imx6q-gw552x.dtb \
+	imx6q-gw553x.dtb \
 	imx6q-h100.dtb \
 	imx6q-hummingboard.dtb \
 	imx6q-icore-rqs.dtb \
@@ -382,6 +393,7 @@
 	imx6q-sabresd.dtb \
 	imx6q-sbc6x.dtb \
 	imx6q-tbs2910.dtb \
+	imx6q-ts4900.dtb \
 	imx6q-tx6q-1010.dtb \
 	imx6q-tx6q-1010-comtft.dtb \
 	imx6q-tx6q-1020.dtb \
@@ -407,6 +419,7 @@
 	imx6sx-sdb.dtb
 dtb-$(CONFIG_SOC_IMX6UL) += \
 	imx6ul-14x14-evk.dtb \
+	imx6ul-geam-kit.dtb \
 	imx6ul-pico-hobbit.dtb \
 	imx6ul-tx6ul-0010.dtb \
 	imx6ul-tx6ul-0011.dtb \
@@ -417,7 +430,8 @@
 	imx7d-nitrogen7.dtb \
 	imx7d-sbc-imx7.dtb \
 	imx7d-sdb.dtb \
-	imx7s-colibri-eval-v3.dtb
+	imx7s-colibri-eval-v3.dtb \
+	imx7s-warp.dtb
 dtb-$(CONFIG_SOC_LS1021A) += \
 	ls1021a-qds.dtb \
 	ls1021a-twr.dtb
@@ -570,6 +584,7 @@
 	omap5-uevm.dtb
 dtb-$(CONFIG_SOC_DRA7XX) += \
 	am57xx-beagle-x15.dtb \
+	am57xx-beagle-x15-revb1.dtb \
 	am57xx-cl-som-am57x.dtb \
 	am57xx-sbc-am57x.dtb \
 	am572x-idk.dtb \
@@ -584,6 +599,7 @@
 	orion5x-linkstation-lswtgl.dtb \
 	orion5x-lswsgl.dtb \
 	orion5x-maxtor-shared-storage-2.dtb \
+	orion5x-netgear-wnr854t.dtb \
 	orion5x-rd88f5182-nas.dtb
 dtb-$(CONFIG_ARCH_PRIMA2) += \
 	prima2-evb.dtb
@@ -603,14 +619,19 @@
 	qcom-ipq8064-ap148.dtb \
 	qcom-msm8660-surf.dtb \
 	qcom-msm8960-cdp.dtb \
+	qcom-msm8974-lge-nexus5-hammerhead.dtb \
 	qcom-msm8974-sony-xperia-honami.dtb
 dtb-$(CONFIG_ARCH_REALVIEW) += \
 	arm-realview-pb1176.dtb \
 	arm-realview-pb11mp.dtb \
 	arm-realview-eb.dtb \
+	arm-realview-eb-bbrevd.dtb \
 	arm-realview-eb-11mp.dtb \
-	arm-realview-eb-11mp-revb.dtb \
+	arm-realview-eb-11mp-bbrevd.dtb \
+	arm-realview-eb-11mp-ctrevb.dtb \
+	arm-realview-eb-11mp-bbrevd-ctrevb.dtb \
 	arm-realview-eb-a9mp.dtb \
+	arm-realview-eb-a9mp-bbrevd.dtb \
 	arm-realview-pba8.dtb \
 	arm-realview-pbx-a9.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += \
@@ -624,8 +645,10 @@
 	rk3229-evb.dtb \
 	rk3288-evb-act8846.dtb \
 	rk3288-evb-rk808.dtb \
+	rk3288-fennec.dtb \
 	rk3288-firefly-beta.dtb \
 	rk3288-firefly.dtb \
+	rk3288-firefly-reload.dtb \
 	rk3288-miqi.dtb \
 	rk3288-popmetal.dtb \
 	rk3288-r89.dtb \
@@ -651,6 +674,7 @@
 dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \
 	emev2-kzm9d.dtb \
 	r7s72100-genmai.dtb \
+	r7s72100-rskrza1.dtb \
 	r8a73a4-ape6evm.dtb \
 	r8a7740-armadillo800eva.dtb \
 	r8a7778-bockw.dtb \
@@ -659,6 +683,7 @@
 	r8a7791-koelsch.dtb \
 	r8a7791-porter.dtb \
 	r8a7792-blanche.dtb \
+	r8a7792-wheat.dtb \
 	r8a7793-gose.dtb \
 	r8a7794-alt.dtb \
 	r8a7794-silk.dtb \
@@ -686,6 +711,7 @@
 dtb-$(CONFIG_ARCH_STI) += \
 	stih407-b2120.dtb \
 	stih410-b2120.dtb \
+	stih410-b2260.dtb \
 	stih415-b2000.dtb \
 	stih415-b2020.dtb \
 	stih416-b2000.dtb \
@@ -719,6 +745,7 @@
 	sun4i-a10-pcduino2.dtb \
 	sun4i-a10-pov-protab2-ips9.dtb
 dtb-$(CONFIG_MACH_SUN5I) += \
+	ntc-gr8-evb.dtb \
 	sun5i-a10s-auxtek-t003.dtb \
 	sun5i-a10s-auxtek-t004.dtb \
 	sun5i-a10s-mk802.dtb \
@@ -727,6 +754,7 @@
 	sun5i-a10s-wobo-i5.dtb \
 	sun5i-a13-difrnce-dit4350.dtb \
 	sun5i-a13-empire-electronix-d709.dtb \
+	sun5i-a13-empire-electronix-m712.dtb \
 	sun5i-a13-hsg-h702.dtb \
 	sun5i-a13-inet-98v-rev2.dtb \
 	sun5i-a13-olinuxino.dtb \
@@ -743,6 +771,7 @@
 	sun6i-a31-mele-a1000g-quad.dtb \
 	sun6i-a31s-colorfly-e708-q1.dtb \
 	sun6i-a31s-cs908.dtb \
+	sun6i-a31s-inet-q972.dtb \
 	sun6i-a31s-primo81.dtb \
 	sun6i-a31s-sina31s.dtb \
 	sun6i-a31s-sinovoip-bpi-m2.dtb \
@@ -782,16 +811,22 @@
 	sun8i-a23-q8-tablet.dtb \
 	sun8i-a33-et-q8-v1.6.dtb \
 	sun8i-a33-ga10h-v1.1.dtb \
+	sun8i-a33-inet-d978-rev2.dtb \
 	sun8i-a33-ippo-q8h-v1.2.dtb \
+	sun8i-a33-olinuxino.dtb \
 	sun8i-a33-q8-tablet.dtb \
 	sun8i-a33-sinlinx-sina33.dtb \
 	sun8i-a83t-allwinner-h8homlet-v2.dtb \
 	sun8i-a83t-cubietruck-plus.dtb \
 	sun8i-h3-bananapi-m2-plus.dtb \
+	sun8i-h3-nanopi-neo.dtb \
 	sun8i-h3-orangepi-2.dtb \
+	sun8i-h3-orangepi-lite.dtb \
 	sun8i-h3-orangepi-one.dtb \
 	sun8i-h3-orangepi-pc.dtb \
+	sun8i-h3-orangepi-pc-plus.dtb \
 	sun8i-h3-orangepi-plus.dtb \
+	sun8i-h3-orangepi-plus2e.dtb \
 	sun8i-r16-parrot.dtb
 dtb-$(CONFIG_MACH_SUN9I) += \
 	sun9i-a80-optimus.dtb \
@@ -836,15 +871,15 @@
 	ste-ccu8540.dtb \
 	ste-ccu9540.dtb
 dtb-$(CONFIG_ARCH_UNIPHIER) += \
-	uniphier-ph1-ld4-ref.dtb \
-	uniphier-ph1-ld6b-ref.dtb \
-	uniphier-ph1-pro4-ace.dtb \
-	uniphier-ph1-pro4-ref.dtb \
-	uniphier-ph1-pro4-sanji.dtb \
-	uniphier-ph1-sld3-ref.dtb \
-	uniphier-ph1-sld8-ref.dtb \
-	uniphier-proxstream2-gentil.dtb \
-	uniphier-proxstream2-vodka.dtb
+	uniphier-ld4-ref.dtb \
+	uniphier-ld6b-ref.dtb \
+	uniphier-pro4-ace.dtb \
+	uniphier-pro4-ref.dtb \
+	uniphier-pro4-sanji.dtb \
+	uniphier-pxs2-gentil.dtb \
+	uniphier-pxs2-vodka.dtb \
+	uniphier-sld3-ref.dtb \
+	uniphier-sld8-ref.dtb
 dtb-$(CONFIG_ARCH_VERSATILE) += \
 	versatile-ab.dtb \
 	versatile-pb.dtb
diff --git a/arch/arm/boot/dts/am335x-baltos.dtsi b/arch/arm/boot/dts/am335x-baltos.dtsi
index b689172..dd45d17 100644
--- a/arch/arm/boot/dts/am335x-baltos.dtsi
+++ b/arch/arm/boot/dts/am335x-baltos.dtsi
@@ -24,12 +24,12 @@
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
 
-	vbat: fixedregulator@0 {
+	vbat: fixedregulator0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vbat";
 		regulator-min-microvolt = <5000000>;
@@ -37,7 +37,7 @@
 		regulator-boot-on;
 	};
 
-	wl12xx_vmmc: fixedregulator@2 {
+	wl12xx_vmmc: fixedregulator2 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&wl12xx_gpio>;
 		compatible = "regulator-fixed";
diff --git a/arch/arm/boot/dts/am335x-base0033.dts b/arch/arm/boot/dts/am335x-base0033.dts
index 58a05f7..c2bee45 100644
--- a/arch/arm/boot/dts/am335x-base0033.dts
+++ b/arch/arm/boot/dts/am335x-base0033.dts
@@ -29,13 +29,13 @@
 
 		compatible = "gpio-leds";
 
-		led@0 {
+		led0 {
 			label = "base:red:user";
 			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;	/* gpio1_21 */
 			default-state = "off";
 		};
 
-		led@1 {
+		led1 {
 			label = "base:green:user";
 			gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;	/* gpio2_0 */
 			default-state = "off";
diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi
index e247c15..007b5e5 100644
--- a/arch/arm/boot/dts/am335x-bone-common.dtsi
+++ b/arch/arm/boot/dts/am335x-bone-common.dtsi
@@ -13,7 +13,7 @@
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
@@ -28,28 +28,28 @@
 
 		compatible = "gpio-leds";
 
-		led@2 {
+		led2 {
 			label = "beaglebone:green:heartbeat";
 			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 			default-state = "off";
 		};
 
-		led@3 {
+		led3 {
 			label = "beaglebone:green:mmc0";
 			gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "mmc0";
 			default-state = "off";
 		};
 
-		led@4 {
+		led4 {
 			label = "beaglebone:green:usr2";
 			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "cpu0";
 			default-state = "off";
 		};
 
-		led@5 {
+		led5 {
 			label = "beaglebone:green:usr3";
 			gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "mmc1";
@@ -57,7 +57,7 @@
 		};
 	};
 
-	vmmcsd_fixed: fixedregulator@0 {
+	vmmcsd_fixed: fixedregulator0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vmmcsd_fixed";
 		regulator-min-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts
index ca72167..55c0e95 100644
--- a/arch/arm/boot/dts/am335x-boneblack.dts
+++ b/arch/arm/boot/dts/am335x-boneblack.dts
@@ -33,17 +33,6 @@
 	status = "okay";
 };
 
-&cpu0_opp_table {
-	/*
-	 * All PG 2.0 silicon may not support 1GHz but some of the early
-	 * BeagleBone Blacks have PG 2.0 silicon which is guaranteed
-	 * to support 1GHz OPP so enable it for PG 2.0 on this board.
-	 */
-	oppnitro@1000000000 {
-		opp-supported-hw = <0x06 0x0100>;
-	};
-};
-
 &am33xx_pinmux {
 	nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins {
 		pinctrl-single,pins = <
diff --git a/arch/arm/boot/dts/am335x-chilisom.dtsi b/arch/arm/boot/dts/am335x-chilisom.dtsi
index 1d64735..f9ee585 100644
--- a/arch/arm/boot/dts/am335x-chilisom.dtsi
+++ b/arch/arm/boot/dts/am335x-chilisom.dtsi
@@ -19,7 +19,7 @@
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x20000000>; /* 512 MB */
 	};
diff --git a/arch/arm/boot/dts/am335x-cm-t335.dts b/arch/arm/boot/dts/am335x-cm-t335.dts
index 817b1de..947c81b 100644
--- a/arch/arm/boot/dts/am335x-cm-t335.dts
+++ b/arch/arm/boot/dts/am335x-cm-t335.dts
@@ -17,7 +17,7 @@
 	model = "CompuLab CM-T335";
 	compatible = "compulab,cm-t335", "ti,am33xx";
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x8000000>;	/* 128 MB */
 	};
@@ -26,7 +26,7 @@
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
 		pinctrl-0 = <&gpio_led_pins>;
-		led@0 {
+		led0 {
 			label = "cm_t335:green";
 			gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;	/* gpio2_0 */
 			linux,default-trigger = "heartbeat";
@@ -34,7 +34,7 @@
 	};
 
 	/* regulator for mmc */
-	vmmc_fixed: fixedregulator@0 {
+	vmmc_fixed: fixedregulator0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vmmc_fixed";
 		regulator-min-microvolt = <3300000>;
@@ -42,7 +42,7 @@
 	};
 
 	/* Regulator for WiFi */
-	vwlan_fixed: fixedregulator@2 {
+	vwlan_fixed: fixedregulator2 {
 		compatible = "regulator-fixed";
 		regulator-name = "vwlan_fixed";
 		gpio = <&gpio0 20 GPIO_ACTIVE_HIGH>; /* gpio0_20 */
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index 5d28712..e82432c 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -20,12 +20,12 @@
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
 
-	vbat: fixedregulator@0 {
+	vbat: fixedregulator0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vbat";
 		regulator-min-microvolt = <5000000>;
@@ -33,13 +33,13 @@
 		regulator-boot-on;
 	};
 
-	lis3_reg: fixedregulator@1 {
+	lis3_reg: fixedregulator1 {
 		compatible = "regulator-fixed";
 		regulator-name = "lis3_reg";
 		regulator-boot-on;
 	};
 
-	wlan_en_reg: fixedregulator@2 {
+	wlan_en_reg: fixedregulator2 {
 		compatible = "regulator-fixed";
 		regulator-name = "wlan-en-regulator";
 		regulator-min-microvolt = <1800000>;
@@ -53,7 +53,7 @@
 		enable-active-high;
 	};
 
-	matrix_keypad: matrix_keypad@0 {
+	matrix_keypad: matrix_keypad0 {
 		compatible = "gpio-matrix-keypad";
 		debounce-delay-ms = <5>;
 		col-scan-delay-us = <2>;
@@ -73,20 +73,20 @@
 				0x0201006c>;	/* DOWN */
 	};
 
-	gpio_keys: volume_keys@0 {
+	gpio_keys: volume_keys0 {
 		compatible = "gpio-keys";
 		#address-cells = <1>;
 		#size-cells = <0>;
 		autorepeat;
 
-		switch@9 {
+		switch9 {
 			label = "volume-up";
 			linux,code = <115>;
 			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
 			wakeup-source;
 		};
 
-		switch@10 {
+		switch10 {
 			label = "volume-down";
 			linux,code = <114>;
 			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
@@ -497,6 +497,8 @@
 
 &lcdc {
 	status = "okay";
+
+	blue-and-red-wiring = "crossed";
 };
 
 &elm {
diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
index 09308d6..975c36e 100644
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -27,12 +27,12 @@
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
 
-	vbat: fixedregulator@0 {
+	vbat: fixedregulator0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vbat";
 		regulator-min-microvolt = <5000000>;
@@ -40,13 +40,13 @@
 		regulator-boot-on;
 	};
 
-	lis3_reg: fixedregulator@1 {
+	lis3_reg: fixedregulator1 {
 		compatible = "regulator-fixed";
 		regulator-name = "lis3_reg";
 		regulator-boot-on;
 	};
 
-	wl12xx_vmmc: fixedregulator@2 {
+	wl12xx_vmmc: fixedregulator2 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&wl12xx_gpio>;
 		compatible = "regulator-fixed";
@@ -58,7 +58,7 @@
 		enable-active-high;
 	};
 
-	vtt_fixed: fixedregulator@3 {
+	vtt_fixed: fixedregulator3 {
 		compatible = "regulator-fixed";
 		regulator-name = "vtt";
 		regulator-min-microvolt = <1500000>;
@@ -75,26 +75,26 @@
 
 		compatible = "gpio-leds";
 
-		led@1 {
+		led1 {
 			label = "evmsk:green:usr0";
 			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		led@2 {
+		led2 {
 			label = "evmsk:green:usr1";
 			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		led@3 {
+		led3 {
 			label = "evmsk:green:mmc0";
 			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "mmc0";
 			default-state = "off";
 		};
 
-		led@4 {
+		led4 {
 			label = "evmsk:green:heartbeat";
 			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
@@ -102,31 +102,31 @@
 		};
 	};
 
-	gpio_buttons: gpio_buttons@0 {
+	gpio_buttons: gpio_buttons0 {
 		compatible = "gpio-keys";
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		switch@1 {
+		switch1 {
 			label = "button0";
 			linux,code = <0x100>;
 			gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
 		};
 
-		switch@2 {
+		switch2 {
 			label = "button1";
 			linux,code = <0x101>;
 			gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
 		};
 
-		switch@3 {
+		switch3 {
 			label = "button2";
 			linux,code = <0x102>;
 			gpios = <&gpio0 30 GPIO_ACTIVE_HIGH>;
 			wakeup-source;
 		};
 
-		switch@4 {
+		switch4 {
 			label = "button3";
 			linux,code = <0x103>;
 			gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
@@ -170,29 +170,29 @@
 		pinctrl-1 = <&lcd_pins_sleep>;
 		status = "okay";
 		panel-info {
-			ac-bias           = <255>;
-			ac-bias-intrpt    = <0>;
-			dma-burst-sz      = <16>;
-			bpp               = <32>;
-			fdd               = <0x80>;
-			sync-edge         = <0>;
-			sync-ctrl         = <1>;
-			raster-order      = <0>;
-			fifo-th           = <0>;
+			ac-bias		= <255>;
+			ac-bias-intrpt	= <0>;
+			dma-burst-sz	= <16>;
+			bpp		= <32>;
+			fdd		= <0x80>;
+			sync-edge	= <0>;
+			sync-ctrl	= <1>;
+			raster-order	= <0>;
+			fifo-th		= <0>;
 		};
 		display-timings {
 			480x272 {
-				hactive         = <480>;
-				vactive         = <272>;
-				hback-porch     = <43>;
-				hfront-porch    = <8>;
-				hsync-len       = <4>;
-				vback-porch     = <12>;
-				vfront-porch    = <4>;
-				vsync-len       = <10>;
+				hactive		= <480>;
+				vactive		= <272>;
+				hback-porch	= <43>;
+				hfront-porch	= <8>;
+				hsync-len	= <4>;
+				vback-porch	= <12>;
+				vfront-porch	= <4>;
+				vsync-len	= <10>;
 				clock-frequency = <9000000>;
-				hsync-active    = <0>;
-				vsync-active    = <0>;
+				hsync-active	= <0>;
+				vsync-active	= <0>;
 			};
 		};
 	};
@@ -711,5 +711,7 @@
 };
 
 &lcdc {
-      status = "okay";
+	status = "okay";
+
+	blue-and-red-wiring = "crossed";
 };
diff --git a/arch/arm/boot/dts/am335x-icev2.dts b/arch/arm/boot/dts/am335x-icev2.dts
index 7d8b8fe..85e04c2 100644
--- a/arch/arm/boot/dts/am335x-icev2.dts
+++ b/arch/arm/boot/dts/am335x-icev2.dts
@@ -19,12 +19,12 @@
 	model = "TI AM3359 ICE-V2";
 	compatible = "ti,am3359-icev2", "ti,am33xx";
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
 
-	vbat: fixedregulator@0 {
+	vbat: fixedregulator0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vbat";
 		regulator-min-microvolt = <5000000>;
@@ -32,7 +32,7 @@
 		regulator-boot-on;
 	};
 
-	vtt_fixed: fixedregulator@1 {
+	vtt_fixed: fixedregulator1 {
 		compatible = "regulator-fixed";
 		regulator-name = "vtt";
 		regulator-min-microvolt = <1500000>;
@@ -43,52 +43,52 @@
 		enable-active-high;
 	};
 
-	leds@0 {
+	leds0 {
 		compatible = "gpio-leds";
 
-		led@0 {
+		led0 {
 			label = "out0";
 			gpios = <&tpic2810 0 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		led@1 {
+		led1 {
 			label = "out1";
 			gpios = <&tpic2810 1 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		led@2 {
+		led2 {
 			label = "out2";
 			gpios = <&tpic2810 2 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		led@3 {
+		led3 {
 			label = "out3";
 			gpios = <&tpic2810 3 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		led@4 {
+		led4 {
 			label = "out4";
 			gpios = <&tpic2810 4 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		led@5 {
+		led5 {
 			label = "out5";
 			gpios = <&tpic2810 5 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		led@6 {
+		led6 {
 			label = "out6";
 			gpios = <&tpic2810 6 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		led@7 {
+		led7 {
 			label = "out7";
 			gpios = <&tpic2810 7 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
@@ -96,49 +96,58 @@
 	};
 
 	/* Tricolor status LEDs */
-	leds@1 {
+	leds1 {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
 		pinctrl-0 = <&user_leds>;
 
-		led@0 {
+		led0 {
 			label = "status0:red:cpu0";
 			gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 			linux,default-trigger = "cpu0";
 		};
 
-		led@1 {
+		led1 {
 			label = "status0:green:usr";
 			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		led@2 {
+		led2 {
 			label = "status0:yellow:usr";
 			gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		led@3 {
+		led3 {
 			label = "status1:red:mmc0";
 			gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 			linux,default-trigger = "mmc0";
 		};
 
-		led@4 {
+		led4 {
 			label = "status1:green:usr";
 			gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		led@5 {
+		led5 {
 			label = "status1:yellow:usr";
 			gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 	};
+	gpio-decoder {
+		compatible = "gpio-decoder";
+		gpios = <&pca9536 3 GPIO_ACTIVE_HIGH>,
+			<&pca9536 2 GPIO_ACTIVE_HIGH>,
+			<&pca9536 1 GPIO_ACTIVE_HIGH>,
+			<&pca9536 0 GPIO_ACTIVE_HIGH>;
+		linux,axis = <0>; /* ABS_X */
+		decoder-max-value = <9>;
+	};
 };
 
 &am33xx_pinmux {
diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi
index e7d9ca1..a5769a8 100644
--- a/arch/arm/boot/dts/am335x-igep0033.dtsi
+++ b/arch/arm/boot/dts/am335x-igep0033.dtsi
@@ -20,7 +20,7 @@
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
@@ -31,14 +31,14 @@
 
 		compatible = "gpio-leds";
 
-		led@0 {
+		led0 {
 			label = "com:green:user";
 			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
 	};
 
-	vbat: fixedregulator@0 {
+	vbat: fixedregulator0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vbat";
 		regulator-min-microvolt = <5000000>;
@@ -46,7 +46,7 @@
 		regulator-boot-on;
 	};
 
-	vmmc: fixedregulator@0 {
+	vmmc: fixedregulator1 {
 		compatible = "regulator-fixed";
 		regulator-name = "vmmc";
 		regulator-min-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/am335x-lxm.dts b/arch/arm/boot/dts/am335x-lxm.dts
index d97b0ef..1d6c6fa 100644
--- a/arch/arm/boot/dts/am335x-lxm.dts
+++ b/arch/arm/boot/dts/am335x-lxm.dts
@@ -19,13 +19,13 @@
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x20000000>; /* 512 MB */
 	};
 
 	/* Power supply provides a fixed 5V @2A */
-	vbat: fixedregulator@0 {
+	vbat: fixedregulator0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vbat";
 		regulator-min-microvolt = <5000000>;
@@ -34,7 +34,7 @@
 	};
 
 	/* Power supply provides a fixed 3.3V @3A */
-	vmmcsd_fixed: fixedregulator@1 {
+	vmmcsd_fixed: fixedregulator1 {
 		compatible = "regulator-fixed";
 		regulator-name = "vmmcsd_fixed";
 		regulator-min-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/am335x-nano.dts b/arch/arm/boot/dts/am335x-nano.dts
index f313999..483d585 100644
--- a/arch/arm/boot/dts/am335x-nano.dts
+++ b/arch/arm/boot/dts/am335x-nano.dts
@@ -19,7 +19,7 @@
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
@@ -27,7 +27,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		led@0 {
+		led0 {
 			label = "nanobone:green:usr1";
 			gpios = <&gpio1 5 0>;
 			default-state = "off";
diff --git a/arch/arm/boot/dts/am335x-pepper.dts b/arch/arm/boot/dts/am335x-pepper.dts
index 8867aaa..30e2f87 100644
--- a/arch/arm/boot/dts/am335x-pepper.dts
+++ b/arch/arm/boot/dts/am335x-pepper.dts
@@ -20,7 +20,7 @@
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x20000000>; /* 512 MB */
 	};
@@ -41,15 +41,15 @@
 		compatible = "ti,da830-evm-audio";
 	};
 
-	vbat: fixedregulator@0 {
+	vbat: fixedregulator0 {
 		compatible = "regulator-fixed";
 	};
 
-	v3v3c_reg: fixedregulator@1 {
+	v3v3c_reg: fixedregulator1 {
 		compatible = "regulator-fixed";
 	};
 
-	vdd5_reg: fixedregulator@2 {
+	vdd5_reg: fixedregulator2 {
 		compatible = "regulator-fixed";
 	};
 };
@@ -595,14 +595,14 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&user_leds_pins>;
 
-	led@0 {
+	led0 {
 		label = "pepper:user0:blue";
 		gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
 		linux,default-trigger = "none";
 		default-state = "off";
 	};
 
-	led@1 {
+	led1 {
 		label = "pepper:user1:red";
 		gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
 		linux,default-trigger = "none";
@@ -616,21 +616,21 @@
 	#address-cells = <1>;
 	#size-cells = <0>;
 
-	button@0 {
+	button0 {
 		label = "home";
 		linux,code = <KEY_HOME>;
 		gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
 		wakeup-source;
 	};
 
-	button@1 {
+	button1 {
 		label = "menu";
 		linux,code = <KEY_MENU>;
 		gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
 		wakeup-source;
 	};
 
-	buttons@2 {
+	buttons2 {
 		label = "power";
 		linux,code = <KEY_POWER>;
 		gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/am335x-phycore-som.dtsi b/arch/arm/boot/dts/am335x-phycore-som.dtsi
index 1263c9d..75e24ad 100644
--- a/arch/arm/boot/dts/am335x-phycore-som.dtsi
+++ b/arch/arm/boot/dts/am335x-phycore-som.dtsi
@@ -25,7 +25,7 @@
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
@@ -33,7 +33,7 @@
 	regulators {
 		compatible = "simple-bus";
 
-		vcc5v: fixedregulator@0 {
+		vcc5v: fixedregulator0 {
 			compatible = "regulator-fixed";
 			regulator-name = "vcc5v";
 			regulator-min-microvolt = <5000000>;
diff --git a/arch/arm/boot/dts/am335x-shc.dts b/arch/arm/boot/dts/am335x-shc.dts
index 837d5b8..bf8727a 100644
--- a/arch/arm/boot/dts/am335x-shc.dts
+++ b/arch/arm/boot/dts/am335x-shc.dts
@@ -64,50 +64,50 @@
 
 		compatible = "gpio-leds";
 
-		led@1 {
+		led1 {
 			label = "shc:power:red";
 			gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		led@2 {
+		led2 {
 			label = "shc:power:bl";
 			gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "timer";
 			default-state = "on";
 		};
 
-		led@3 {
+		led3 {
 			label = "shc:lan:red";
 			gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		led@4 {
+		led4 {
 			label = "shc:lan:bl";
 			gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		led@5 {
+		led5 {
 			label = "shc:cloud:red";
 			gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		led@6 {
+		led6 {
 			label = "shc:cloud:bl";
 			gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x20000000>; /* 512 MB */
 	};
 
-	vmmcsd_fixed: fixedregulator@0 {
+	vmmcsd_fixed: fixedregulator0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vmmcsd_fixed";
 		regulator-min-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/am335x-sl50.dts b/arch/arm/boot/dts/am335x-sl50.dts
index a6efbe6..b0dfa6f 100644
--- a/arch/arm/boot/dts/am335x-sl50.dts
+++ b/arch/arm/boot/dts/am335x-sl50.dts
@@ -19,6 +19,11 @@
 		};
 	};
 
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>; /* 512 MB */
+	};
+
 	chosen {
 		stdout-path = &uart0;
 	};
@@ -28,25 +33,25 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pins>;
 
-		led@0 {
+		led0 {
 			label = "sl50:green:usr0";
 			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
 
-		led@1 {
+		led1 {
 			label = "sl50:red:usr1";
 			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
 
-		led@2 {
+		led2 {
 			label = "sl50:green:usr2";
 			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
 
-		led@3 {
+		led3 {
 			label = "sl50:red:usr3";
 			gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
 			default-state = "off";
@@ -103,7 +108,7 @@
 		reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
 	};
 
-	vmmcsd_fixed: fixedregulator@0 {
+	vmmcsd_fixed: fixedregulator0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vmmcsd_fixed";
 		regulator-min-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/am335x-wega.dtsi b/arch/arm/boot/dts/am335x-wega.dtsi
index 282f6d4..02c6736 100644
--- a/arch/arm/boot/dts/am335x-wega.dtsi
+++ b/arch/arm/boot/dts/am335x-wega.dtsi
@@ -11,10 +11,14 @@
 	model = "Phytec AM335x phyBOARD-WEGA";
 	compatible = "phytec,am335x-wega", "phytec,am335x-phycore-som", "ti,am33xx";
 
+	sound: sound_iface {
+		compatible = "ti,da830-evm-audio";
+	};
+
 	regulators {
 		compatible = "simple-bus";
 
-		vcc3v3: fixedregulator@1 {
+		vcc3v3: fixedregulator1 {
 			compatible = "regulator-fixed";
 			regulator-name = "vcc3v3";
 			regulator-min-microvolt = <3300000>;
@@ -24,6 +28,58 @@
 	};
 };
 
+/* Audio */
+&am33xx_pinmux {
+	mcasp0_pins: pinmux_mcasp0 {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x9AC, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp0_ahclkx.mcasp0_ahclkx */
+			AM33XX_IOPAD(0x990, PIN_INPUT_PULLDOWN | MUX_MODE0)  /* mcasp0_aclkx.mcasp0_aclkx */
+			AM33XX_IOPAD(0x994, PIN_INPUT_PULLDOWN | MUX_MODE0)  /* mcasp0_fsx.mcasp0_fsx */
+			AM33XX_IOPAD(0x998, PIN_INPUT_PULLDOWN | MUX_MODE0)  /* mcasp0_axr0.mcasp0_axr0 */
+			AM33XX_IOPAD(0x9A8, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp0_axr1.mcasp0_axr1 */
+		>;
+	};
+};
+
+&i2c0 {
+	tlv320aic3007: tlv320aic3007@18 {
+		compatible = "ti,tlv320aic3007";
+		reg = <0x18>;
+		AVDD-supply = <&vcc3v3>;
+		IOVDD-supply = <&vcc3v3>;
+		DRVDD-supply = <&vcc3v3>;
+		DVDD-supply = <&vdig1_reg>;
+		status = "okay";
+	};
+};
+
+&mcasp0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcasp0_pins>;
+	op-mode = <0>; /* DAVINCI_MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	serial-dir = <
+		2 1 0 0 /* # 0: INACTIVE, 1: TX, 2: RX */
+	>;
+	tx-num-evt = <16>;
+	rt-num-evt = <16>;
+	status = "okay";
+};
+
+&sound {
+	ti,model = "AM335x-Wega";
+	ti,audio-codec = <&tlv320aic3007>;
+	ti,mcasp-controller = <&mcasp0>;
+	ti,audio-routing =
+		"Line Out",		"LLOUT",
+		"Line Out",		"RLOUT",
+		"LINE1L",		"Line In",
+		"LINE1R",		"Line In";
+	clocks = <&mcasp0_fck>;
+	clock-names = "mclk";
+	status = "okay";
+};
+
 /* CAN Busses */
 &am33xx_pinmux {
 	dcan1_pins: pinmux_dcan1 {
@@ -99,6 +155,12 @@
 	status = "okay";
 };
 
+/* Power */
+&vdig1_reg {
+	regulator-boot-on;
+	regulator-always-on;
+};
+
 /* UARTs */
 &am33xx_pinmux {
 	uart0_pins: pinmux_uart0 {
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 98748c6..194d884 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -11,11 +11,11 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pinctrl/am33xx.h>
 
-#include "skeleton.dtsi"
-
 / {
 	compatible = "ti,am33xx";
 	interrupt-parent = <&intc>;
+	#address-cells = <1>;
+	#size-cells = <1>;
 
 	aliases {
 		i2c0 = &i2c0;
@@ -45,9 +45,19 @@
 			device_type = "cpu";
 			reg = <0>;
 
-			operating-points-v2 = <&cpu0_opp_table>;
-			ti,syscon-efuse = <&scm_conf 0x7fc 0x1fff 0>;
-			ti,syscon-rev = <&scm_conf 0x600>;
+			/*
+			 * To consider voltage drop between PMIC and SoC,
+			 * tolerance value is reduced to 2% from 4% and
+			 * voltage value is increased as a precaution.
+			 */
+			operating-points = <
+				/* kHz    uV */
+				720000  1285000
+				600000  1225000
+				500000  1125000
+				275000  1125000
+			>;
+			voltage-tolerance = <2>; /* 2 percentage */
 
 			clocks = <&dpll_mpu_ck>;
 			clock-names = "cpu";
@@ -56,78 +66,6 @@
 		};
 	};
 
-	cpu0_opp_table: opp_table0 {
-		compatible = "operating-points-v2";
-
-		/*
-		 * The three following nodes are marked with opp-suspend
-		 * because the can not be enabled simultaneously on a
-		 * single SoC.
-		 */
-		opp50@300000000 {
-			opp-hz = /bits/ 64 <300000000>;
-			opp-microvolt = <950000 931000 969000>;
-			opp-supported-hw = <0x06 0x0010>;
-			opp-suspend;
-		};
-
-		opp100@275000000 {
-			opp-hz = /bits/ 64 <275000000>;
-			opp-microvolt = <1100000 1078000 1122000>;
-			opp-supported-hw = <0x01 0x00FF>;
-			opp-suspend;
-		};
-
-		opp100@300000000 {
-			opp-hz = /bits/ 64 <300000000>;
-			opp-microvolt = <1100000 1078000 1122000>;
-			opp-supported-hw = <0x06 0x0020>;
-			opp-suspend;
-		};
-
-		opp100@500000000 {
-			opp-hz = /bits/ 64 <500000000>;
-			opp-microvolt = <1100000 1078000 1122000>;
-			opp-supported-hw = <0x01 0xFFFF>;
-		};
-
-		opp100@600000000 {
-			opp-hz = /bits/ 64 <600000000>;
-			opp-microvolt = <1100000 1078000 1122000>;
-			opp-supported-hw = <0x06 0x0040>;
-		};
-
-		opp120@600000000 {
-			opp-hz = /bits/ 64 <600000000>;
-			opp-microvolt = <1200000 1176000 1224000>;
-			opp-supported-hw = <0x01 0xFFFF>;
-		};
-
-		opp120@720000000 {
-			opp-hz = /bits/ 64 <720000000>;
-			opp-microvolt = <1200000 1176000 1224000>;
-			opp-supported-hw = <0x06 0x0080>;
-		};
-
-		oppturbo@720000000 {
-			opp-hz = /bits/ 64 <720000000>;
-			opp-microvolt = <1260000 1234800 1285200>;
-			opp-supported-hw = <0x01 0xFFFF>;
-		};
-
-		oppturbo@800000000 {
-			opp-hz = /bits/ 64 <800000000>;
-			opp-microvolt = <1260000 1234800 1285200>;
-			opp-supported-hw = <0x06 0x0100>;
-		};
-
-		oppnitro@1000000000 {
-			opp-hz = /bits/ 64 <1000000000>;
-			opp-microvolt = <1325000 1298500 1351500>;
-			opp-supported-hw = <0x04 0x0200>;
-		};
-	};
-
 	pmu {
 		compatible = "arm,cortex-a8-pmu";
 		interrupts = <3>;
diff --git a/arch/arm/boot/dts/am3517-craneboard.dts b/arch/arm/boot/dts/am3517-craneboard.dts
index f9d8f39..083ff50 100644
--- a/arch/arm/boot/dts/am3517-craneboard.dts
+++ b/arch/arm/boot/dts/am3517-craneboard.dts
@@ -15,7 +15,7 @@
 	model = "TI AM3517 CraneBoard (TMDSEVM3517)";
 	compatible = "ti,am3517-craneboard", "ti,am3517", "ti,omap3";
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>;	/* 256 MB */
 	};
diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/am3517-evm.dts
index b4127c6..0e4a125 100644
--- a/arch/arm/boot/dts/am3517-evm.dts
+++ b/arch/arm/boot/dts/am3517-evm.dts
@@ -13,7 +13,7 @@
 	model = "TI AM3517 EVM (AM3517/05 TMDSEVM3517)";
 	compatible = "ti,am3517-evm", "ti,am3517", "ti,omap3";
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
diff --git a/arch/arm/boot/dts/am3517.dtsi b/arch/arm/boot/dts/am3517.dtsi
index 5e3f5e8..0db19d3 100644
--- a/arch/arm/boot/dts/am3517.dtsi
+++ b/arch/arm/boot/dts/am3517.dtsi
@@ -15,7 +15,7 @@
 		serial3 = &uart4;
 	};
 
-	ocp {
+	ocp@68000000 {
 		am35x_otg_hs: am35x_otg_hs@5c040000 {
 			compatible = "ti,omap3-musb";
 			ti,hwmods = "am35x_otg_hs";
diff --git a/arch/arm/boot/dts/am3517_mt_ventoux.dts b/arch/arm/boot/dts/am3517_mt_ventoux.dts
index fdf5ce6..3395783 100644
--- a/arch/arm/boot/dts/am3517_mt_ventoux.dts
+++ b/arch/arm/boot/dts/am3517_mt_ventoux.dts
@@ -13,7 +13,7 @@
 	model = "TeeJet Mt.Ventoux";
 	compatible = "teejet,mt_ventoux", "ti,omap3";
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index 0fadae5..a275fa9 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -11,12 +11,16 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 
-#include "skeleton.dtsi"
-
 / {
 	compatible = "ti,am4372", "ti,am43";
 	interrupt-parent = <&wakeupgen>;
+	#address-cells = <1>;
+	#size-cells = <1>;
 
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0>;
+	};
 
 	aliases {
 		i2c0 = &i2c0;
@@ -132,7 +136,7 @@
 		cache-level = <2>;
 	};
 
-	ocp {
+	ocp@44000000 {
 		compatible = "ti,am4372-l3-noc", "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git a/arch/arm/boot/dts/am437x-cm-t43.dts b/arch/arm/boot/dts/am437x-cm-t43.dts
index 9551c47..9e92d48 100644
--- a/arch/arm/boot/dts/am437x-cm-t43.dts
+++ b/arch/arm/boot/dts/am437x-cm-t43.dts
@@ -209,7 +209,6 @@
 		#interrupt-cells = <2>;
 
 		dcdc1: regulator-dcdc1 {
-			compatible = "ti,tps65218-dcdc1";
 			regulator-name = "vdd_core";
 			regulator-min-microvolt = <912000>;
 			regulator-max-microvolt = <1144000>;
@@ -218,7 +217,6 @@
 		};
 
 		dcdc2: regulator-dcdc2 {
-			compatible = "ti,tps65218-dcdc2";
 			regulator-name = "vdd_mpu";
 			regulator-min-microvolt = <912000>;
 			regulator-max-microvolt = <1378000>;
@@ -227,7 +225,6 @@
 		};
 
 		dcdc3: regulator-dcdc3 {
-			compatible = "ti,tps65218-dcdc3";
 			regulator-name = "vdcdc3";
 			regulator-suspend-enable;
 			regulator-min-microvolt = <1500000>;
@@ -237,7 +234,6 @@
 		};
 
 		dcdc5: regulator-dcdc5 {
-			compatible = "ti,tps65218-dcdc5";
 			regulator-name = "v1_0bat";
 			regulator-min-microvolt = <1000000>;
 			regulator-max-microvolt = <1000000>;
@@ -246,7 +242,6 @@
 		};
 
 		dcdc6: regulator-dcdc6 {
-			compatible = "ti,tps65218-dcdc6";
 			regulator-name = "v1_8bat";
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
@@ -255,7 +250,6 @@
 		};
 
 		ldo1: regulator-ldo1 {
-			compatible = "ti,tps65218-ldo1";
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			regulator-boot-on;
diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
index 14677d5..957840c 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -58,7 +58,7 @@
 		default-brightness-level = <8>;
 	};
 
-	matrix_keypad: matrix_keypad@0 {
+	matrix_keypad: matrix_keypad0 {
 		compatible = "gpio-matrix-keypad";
 		debounce-delay-ms = <5>;
 		col-scan-delay-us = <2>;
@@ -513,7 +513,6 @@
 		#interrupt-cells = <2>;
 
 		dcdc1: regulator-dcdc1 {
-			compatible = "ti,tps65218-dcdc1";
 			regulator-name = "vdd_core";
 			regulator-min-microvolt = <912000>;
 			regulator-max-microvolt = <1144000>;
@@ -522,7 +521,6 @@
 		};
 
 		dcdc2: regulator-dcdc2 {
-			compatible = "ti,tps65218-dcdc2";
 			regulator-name = "vdd_mpu";
 			regulator-min-microvolt = <912000>;
 			regulator-max-microvolt = <1378000>;
@@ -531,33 +529,42 @@
 		};
 
 		dcdc3: regulator-dcdc3 {
-			compatible = "ti,tps65218-dcdc3";
 			regulator-name = "vdcdc3";
 			regulator-min-microvolt = <1500000>;
 			regulator-max-microvolt = <1500000>;
 			regulator-boot-on;
 			regulator-always-on;
+			regulator-state-mem {
+				regulator-on-in-suspend;
+			};
+			regulator-state-disk {
+				regulator-off-in-suspend;
+			};
 		};
+
 		dcdc5: regulator-dcdc5 {
-			compatible = "ti,tps65218-dcdc5";
 			regulator-name = "v1_0bat";
 			regulator-min-microvolt = <1000000>;
 			regulator-max-microvolt = <1000000>;
 			regulator-boot-on;
 			regulator-always-on;
+			regulator-state-mem {
+				regulator-on-in-suspend;
+			};
 		};
 
 		dcdc6: regulator-dcdc6 {
-			compatible = "ti,tps65218-dcdc6";
 			regulator-name = "v1_8bat";
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			regulator-boot-on;
 			regulator-always-on;
+			regulator-state-mem {
+				regulator-on-in-suspend;
+			};
 		};
 
 		ldo1: regulator-ldo1 {
-			compatible = "ti,tps65218-ldo1";
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			regulator-boot-on;
diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts b/arch/arm/boot/dts/am437x-idk-evm.dts
index 12a6951..25ce611 100644
--- a/arch/arm/boot/dts/am437x-idk-evm.dts
+++ b/arch/arm/boot/dts/am437x-idk-evm.dts
@@ -104,7 +104,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		switch@0 {
+		switch0 {
 			label = "power-button";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts
index 5687d6b..319d942 100644
--- a/arch/arm/boot/dts/am437x-sk-evm.dts
+++ b/arch/arm/boot/dts/am437x-sk-evm.dts
@@ -64,7 +64,7 @@
 		};
 	};
 
-	matrix_keypad: matrix_keypad@0 {
+	matrix_keypad: matrix_keypad0 {
 		compatible = "gpio-matrix-keypad";
 
 		pinctrl-names = "default";
@@ -93,28 +93,28 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&leds_pins>;
 
-		led@0 {
+		led0 {
 			label = "am437x-sk:red:heartbeat";
 			gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>;	/* Bank 5, pin 0 */
 			linux,default-trigger = "heartbeat";
 			default-state = "off";
 		};
 
-		led@1 {
+		led1 {
 			label = "am437x-sk:green:mmc1";
 			gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;	/* Bank 5, pin 1 */
 			linux,default-trigger = "mmc0";
 			default-state = "off";
 		};
 
-		led@2 {
+		led2 {
 			label = "am437x-sk:blue:cpu0";
 			gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;	/* Bank 5, pin 2 */
 			linux,default-trigger = "cpu0";
 			default-state = "off";
 		};
 
-		led@3 {
+		led3 {
 			label = "am437x-sk:blue:usr3";
 			gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>;	/* Bank 5, pin 3 */
 			default-state = "off";
@@ -428,7 +428,6 @@
 		#interrupt-cells = <2>;
 
 		dcdc1: regulator-dcdc1 {
-			compatible = "ti,tps65218-dcdc1";
 			/* VDD_CORE limits min of OPP50 and max of OPP100 */
 			regulator-name = "vdd_core";
 			regulator-min-microvolt = <912000>;
@@ -438,7 +437,6 @@
 		};
 
 		dcdc2: regulator-dcdc2 {
-			compatible = "ti,tps65218-dcdc2";
 			/* VDD_MPU limits min of OPP50 and max of OPP_NITRO */
 			regulator-name = "vdd_mpu";
 			regulator-min-microvolt = <912000>;
@@ -448,16 +446,20 @@
 		};
 
 		dcdc3: regulator-dcdc3 {
-			compatible = "ti,tps65218-dcdc3";
 			regulator-name = "vdds_ddr";
 			regulator-min-microvolt = <1500000>;
 			regulator-max-microvolt = <1500000>;
 			regulator-boot-on;
 			regulator-always-on;
+			regulator-state-mem {
+				regulator-on-in-suspend;
+			};
+			regulator-state-disk {
+				regulator-off-in-suspend;
+			};
 		};
 
 		dcdc4: regulator-dcdc4 {
-			compatible = "ti,tps65218-dcdc4";
 			regulator-name = "v3_3d";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
@@ -465,8 +467,31 @@
 			regulator-always-on;
 		};
 
+		dcdc5: regulator-dcdc5 {
+			compatible = "ti,tps65218-dcdc5";
+			regulator-name = "v1_0bat";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-boot-on;
+			regulator-always-on;
+			regulator-state-mem {
+				regulator-on-in-suspend;
+			};
+		};
+
+		dcdc6: regulator-dcdc6 {
+			compatible = "ti,tps65218-dcdc6";
+			regulator-name = "v1_8bat";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+			regulator-always-on;
+			regulator-state-mem {
+				regulator-on-in-suspend;
+			};
+		};
+
 		ldo1: regulator-ldo1 {
-			compatible = "ti,tps65218-ldo1";
 			regulator-name = "v1_8d";
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index ad32e55..9d35c3f 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -32,7 +32,7 @@
 		enable-active-high;
 	};
 
-	vbat: fixedregulator@0 {
+	vbat: fixedregulator0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vbat";
 		regulator-min-microvolt = <5000000>;
@@ -67,7 +67,7 @@
 		};
 	};
 
-	matrix_keypad: matrix_keypad@0 {
+	matrix_keypad: matrix_keypad0 {
 		compatible = "gpio-matrix-keypad";
 		debounce-delay-ms = <5>;
 		col-scan-delay-us = <2>;
@@ -421,7 +421,6 @@
 		#interrupt-cells = <2>;
 
 		dcdc1: regulator-dcdc1 {
-			compatible = "ti,tps65218-dcdc1";
 			regulator-name = "vdd_core";
 			regulator-min-microvolt = <912000>;
 			regulator-max-microvolt = <1144000>;
@@ -430,7 +429,6 @@
 		};
 
 		dcdc2: regulator-dcdc2 {
-			compatible = "ti,tps65218-dcdc2";
 			regulator-name = "vdd_mpu";
 			regulator-min-microvolt = <912000>;
 			regulator-max-microvolt = <1378000>;
@@ -439,7 +437,6 @@
 		};
 
 		dcdc3: regulator-dcdc3 {
-			compatible = "ti,tps65218-dcdc3";
 			regulator-name = "vdcdc3";
 			regulator-min-microvolt = <1500000>;
 			regulator-max-microvolt = <1500000>;
@@ -448,7 +445,6 @@
 		};
 
 		dcdc4: regulator-dcdc4 {
-			compatible = "ti,tps65218-dcdc4";
 			regulator-name = "vdcdc4";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
@@ -457,21 +453,18 @@
 		};
 
 		dcdc5: regulator-dcdc5 {
-			compatible = "ti,tps65218-dcdc5";
 			regulator-name = "v1_0bat";
 			regulator-min-microvolt = <1000000>;
 			regulator-max-microvolt = <1000000>;
 		};
 
 		dcdc6: regulator-dcdc6 {
-			compatible = "ti,tps65218-dcdc6";
 			regulator-name = "v1_8bat";
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 		};
 
 		ldo1: regulator-ldo1 {
-			compatible = "ti,tps65218-ldo1";
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			regulator-boot-on;
diff --git a/arch/arm/boot/dts/am572x-idk.dts b/arch/arm/boot/dts/am572x-idk.dts
index e3acb99..87bbc66 100644
--- a/arch/arm/boot/dts/am572x-idk.dts
+++ b/arch/arm/boot/dts/am572x-idk.dts
@@ -18,7 +18,7 @@
 	compatible = "ti,am5728-idk", "ti,am5728", "ti,dra742", "ti,dra74",
 		     "ti,dra7";
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x80000000 0x0 0x80000000>;
 	};
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
new file mode 100644
index 0000000..6df7829
--- /dev/null
+++ b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
@@ -0,0 +1,596 @@
+/*
+ * Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "dra74x.dtsi"
+#include "am57xx-commercial-grade.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "ti,am572x-beagle-x15", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7";
+
+	aliases {
+		rtc0 = &mcp_rtc;
+		rtc1 = &tps659038_rtc;
+		rtc2 = &rtc;
+		display0 = &hdmi0;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x80000000>;
+	};
+
+	vdd_3v3: fixedregulator-vdd_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3";
+		vin-supply = <&regen1>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	aic_dvdd: fixedregulator-aic_dvdd {
+		compatible = "regulator-fixed";
+		regulator-name = "aic_dvdd_fixed";
+		vin-supply = <&vdd_3v3>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vtt_fixed: fixedregulator-vtt {
+		/* TPS51200 */
+		compatible = "regulator-fixed";
+		regulator-name = "vtt_fixed";
+		vin-supply = <&smps3_reg>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led0 {
+			label = "beagle-x15:usr0";
+			gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+
+		led1 {
+			label = "beagle-x15:usr1";
+			gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "cpu0";
+			default-state = "off";
+		};
+
+		led2 {
+			label = "beagle-x15:usr2";
+			gpios = <&gpio7 14 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+			default-state = "off";
+		};
+
+		led3 {
+			label = "beagle-x15:usr3";
+			gpios = <&gpio7 15 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "disk-activity";
+			default-state = "off";
+		};
+	};
+
+	gpio_fan: gpio_fan {
+		/* Based on 5v 500mA AFB02505HHB */
+		compatible = "gpio-fan";
+		gpios =  <&tps659038_gpio 2 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <0     0>,
+				     <13000 1>;
+		#cooling-cells = <2>;
+	};
+
+	hdmi0: connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&tpd12s015_out>;
+			};
+		};
+	};
+
+	tpd12s015: encoder {
+		compatible = "ti,tpd12s015";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tpd12s015_in: endpoint {
+					remote-endpoint = <&hdmi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tpd12s015_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+
+	sound0: sound0 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "BeagleBoard-X15";
+		simple-audio-card,widgets =
+			"Line", "Line Out",
+			"Line", "Line In";
+		simple-audio-card,routing =
+			"Line Out",	"LLOUT",
+			"Line Out",	"RLOUT",
+			"MIC2L",	"Line In",
+			"MIC2R",	"Line In";
+		simple-audio-card,format = "dsp_b";
+		simple-audio-card,bitclock-master = <&sound0_master>;
+		simple-audio-card,frame-master = <&sound0_master>;
+		simple-audio-card,bitclock-inversion;
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcasp3>;
+		};
+
+		sound0_master: simple-audio-card,codec {
+			sound-dai = <&tlv320aic3104>;
+			clocks = <&clkout2_clk>;
+		};
+	};
+};
+
+&dra7_pmx_core {
+	mmc1_pins_default: mmc1_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14)	/* mmc1sdcd.gpio219 */
+			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
+			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
+			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
+			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
+			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
+			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
+		>;
+	};
+
+	mmc2_pins_default: mmc2_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+			DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+			DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+			DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+			DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+			DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+			DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+			DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+			DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+		>;
+	};
+};
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tps659038: tps659038@58 {
+		compatible = "ti,tps659038";
+		reg = <0x58>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		#interrupt-cells = <2>;
+		interrupt-controller;
+
+		ti,system-power-controller;
+
+		tps659038_pmic {
+			compatible = "ti,tps659038-pmic";
+
+			regulators {
+				smps12_reg: smps12 {
+					/* VDD_MPU */
+					regulator-name = "smps12";
+					regulator-min-microvolt = < 850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps3_reg: smps3 {
+					/* VDD_DDR */
+					regulator-name = "smps3";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps45_reg: smps45 {
+					/* VDD_DSPEVE, VDD_IVA, VDD_GPU */
+					regulator-name = "smps45";
+					regulator-min-microvolt = < 850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps6_reg: smps6 {
+					/* VDD_CORE */
+					regulator-name = "smps6";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1150000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				/* SMPS7 unused */
+
+				smps8_reg: smps8 {
+					/* VDD_1V8 */
+					regulator-name = "smps8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				/* SMPS9 unused */
+
+				ldo1_reg: ldo1 {
+					/* VDD_SD / VDDSHV8  */
+					regulator-name = "ldo1";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				ldo2_reg: ldo2 {
+					/* VDD_SHV5 */
+					regulator-name = "ldo2";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo3_reg: ldo3 {
+					/* VDDA_1V8_PHYA */
+					regulator-name = "ldo3";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo4_reg: ldo4 {
+					/* VDDA_1V8_PHYB */
+					regulator-name = "ldo4";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo9_reg: ldo9 {
+					/* VDD_RTC */
+					regulator-name = "ldo9";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldoln_reg: ldoln {
+					/* VDDA_1V8_PLL */
+					regulator-name = "ldoln";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldousb_reg: ldousb {
+					/* VDDA_3V_USB: VDDA_USBHS33 */
+					regulator-name = "ldousb";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-boot-on;
+				};
+
+				regen1: regen1 {
+					/* VDD_3V3_ON */
+					regulator-name = "regen1";
+					regulator-boot-on;
+					regulator-always-on;
+				};
+			};
+		};
+
+		tps659038_rtc: tps659038_rtc {
+			compatible = "ti,palmas-rtc";
+			interrupt-parent = <&tps659038>;
+			interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+			wakeup-source;
+		};
+
+		tps659038_pwr_button: tps659038_pwr_button {
+			compatible = "ti,palmas-pwrbutton";
+			interrupt-parent = <&tps659038>;
+			interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+			wakeup-source;
+			ti,palmas-long-press-seconds = <12>;
+		};
+
+		tps659038_gpio: tps659038_gpio {
+			compatible = "ti,palmas-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		extcon_usb2: tps659038_usb {
+			compatible = "ti,palmas-usb-vid";
+			ti,enable-vbus-detection;
+			vbus-gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
+		};
+
+	};
+
+	tmp102: tmp102@48 {
+		compatible = "ti,tmp102";
+		reg = <0x48>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+		#thermal-sensor-cells = <1>;
+	};
+
+	tlv320aic3104: tlv320aic3104@18 {
+		#sound-dai-cells = <0>;
+		compatible = "ti,tlv320aic3104";
+		reg = <0x18>;
+		assigned-clocks = <&clkoutmux2_clk_mux>;
+		assigned-clock-parents = <&sys_clk2_dclk_div>;
+
+		status = "okay";
+		adc-settle-ms = <40>;
+
+		AVDD-supply = <&vdd_3v3>;
+		IOVDD-supply = <&vdd_3v3>;
+		DRVDD-supply = <&vdd_3v3>;
+		DVDD-supply = <&aic_dvdd>;
+	};
+
+	eeprom: eeprom@50 {
+		compatible = "at,24c32";
+		reg = <0x50>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	mcp_rtc: rtc@6f {
+		compatible = "microchip,mcp7941x";
+		reg = <0x6f>;
+		interrupts-extended = <&crossbar_mpu GIC_SPI 2 IRQ_TYPE_EDGE_RISING>,
+				      <&dra7_pmx_core 0x424>;
+		interrupt-names = "irq", "wakeup";
+
+		vcc-supply = <&vdd_3v3>;
+		wakeup-source;
+	};
+};
+
+&gpio7 {
+	ti,no-reset-on-init;
+	ti,no-idle-on-init;
+};
+
+&cpu0 {
+	cpu0-supply = <&smps12_reg>;
+	voltage-tolerance = <1>;
+};
+
+&uart3 {
+	status = "okay";
+	interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+			      <&dra7_pmx_core 0x3f8>;
+};
+
+&mac {
+	status = "okay";
+	dual_emac;
+};
+
+&cpsw_emac0 {
+	phy_id = <&davinci_mdio>, <1>;
+	phy-mode = "rgmii";
+	dual_emac_res_vlan = <1>;
+};
+
+&cpsw_emac1 {
+	phy_id = <&davinci_mdio>, <2>;
+	phy-mode = "rgmii";
+	dual_emac_res_vlan = <2>;
+};
+
+&mmc1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_default>;
+
+	bus-width = <4>;
+	cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */
+};
+
+&mmc2 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins_default>;
+
+	vmmc-supply = <&vdd_3v3>;
+	bus-width = <8>;
+	ti,non-removable;
+	cap-mmc-dual-data-rate;
+};
+
+&sata {
+	status = "okay";
+};
+
+&usb2_phy1 {
+	phy-supply = <&ldousb_reg>;
+};
+
+&usb2_phy2 {
+	phy-supply = <&ldousb_reg>;
+};
+
+&usb1 {
+	dr_mode = "host";
+};
+
+&omap_dwc3_2 {
+	extcon = <&extcon_usb2>;
+};
+
+&usb2 {
+	/*
+	 * Stand alone usage is peripheral only.
+	 * However, with some resistor modifications
+	 * this port can be used via expansion connectors
+	 * as "host" or "dual-role". If so, provide
+	 * the necessary dr_mode override in the expansion
+	 * board's DT.
+	 */
+	dr_mode = "peripheral";
+};
+
+&cpu_trips {
+	cpu_alert1: cpu_alert1 {
+		temperature = <50000>; /* millicelsius */
+		hysteresis = <2000>; /* millicelsius */
+		type = "active";
+	};
+};
+
+&cpu_cooling_maps {
+	map1 {
+		trip = <&cpu_alert1>;
+		cooling-device = <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+	};
+};
+
+&thermal_zones {
+	board_thermal: board_thermal {
+		polling-delay-passive = <1250>; /* milliseconds */
+		polling-delay = <1500>; /* milliseconds */
+
+				/* sensor       ID */
+		thermal-sensors = <&tmp102     0>;
+
+		board_trips: trips {
+			board_alert0: board_alert {
+				temperature = <40000>; /* millicelsius */
+				hysteresis = <2000>; /* millicelsius */
+				type = "active";
+			};
+
+			board_crit: board_crit {
+				temperature = <105000>; /* millicelsius */
+				hysteresis = <0>; /* millicelsius */
+				type = "critical";
+			};
+		};
+
+		board_cooling_maps: cooling-maps {
+			map0 {
+				trip = <&board_alert0>;
+				cooling-device =
+				  <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+			};
+		};
+       };
+};
+
+&dss {
+	status = "ok";
+
+	vdda_video-supply = <&ldoln_reg>;
+};
+
+&hdmi {
+	status = "ok";
+	vdda-supply = <&ldo4_reg>;
+
+	port {
+		hdmi_out: endpoint {
+			remote-endpoint = <&tpd12s015_in>;
+		};
+	};
+};
+
+&pcie1 {
+	gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
+};
+
+&mcasp3 {
+	#sound-dai-cells = <0>;
+	assigned-clocks = <&mcasp3_ahclkx_mux>;
+	assigned-clock-parents = <&sys_clkin2>;
+	status = "okay";
+
+	op-mode = <0>;	/* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	/* 4 serializers */
+	serial-dir = <	/* 0: INACTIVE, 1: TX, 2: RX */
+		1 2 0 0
+	>;
+	tx-num-evt = <32>;
+	rx-num-evt = <32>;
+};
+
+&mailbox5 {
+	status = "okay";
+	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+		status = "okay";
+	};
+	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+		status = "okay";
+	};
+};
+
+&mailbox6 {
+	status = "okay";
+	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+		status = "okay";
+	};
+	mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
+		status = "okay";
+	};
+};
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts b/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts
new file mode 100644
index 0000000..ca85570
--- /dev/null
+++ b/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts
@@ -0,0 +1,24 @@
+/*
+ * Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "am57xx-beagle-x15-common.dtsi"
+
+/ {
+	model = "TI AM5728 BeagleBoard-X15 rev B1";
+};
+
+&tpd12s015 {
+	gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>,	/* gpio7_10, CT CP HPD */
+		<&gpio2 30 GPIO_ACTIVE_HIGH>,	/* gpio2_30, LS OE */
+		<&gpio7 12 GPIO_ACTIVE_HIGH>;	/* gpio7_12/sp1_cs2, HPD */
+};
+
+&mmc1 {
+	vmmc-supply = <&vdd_3v3>;
+	vmmc-aux-supply = <&ldo1_reg>;
+};
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts
index c4d04c5..8c66f2e 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15.dts
+++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts
@@ -1,822 +1,24 @@
 /*
- * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-/dts-v1/;
 
-#include "dra74x.dtsi"
-#include "am57xx-commercial-grade.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
+#include "am57xx-beagle-x15-common.dtsi"
 
 / {
+	/* NOTE: This describes the "original" pre-production A2 revision */
 	model = "TI AM5728 BeagleBoard-X15";
-	compatible = "ti,am572x-beagle-x15", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7";
-
-	aliases {
-		rtc0 = &mcp_rtc;
-		rtc1 = &tps659038_rtc;
-		rtc2 = &rtc;
-		display0 = &hdmi0;
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x80000000 0x0 0x80000000>;
-	};
-
-	vdd_3v3: fixedregulator-vdd_3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd_3v3";
-		vin-supply = <&regen1>;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	aic_dvdd: fixedregulator-aic_dvdd {
-		compatible = "regulator-fixed";
-		regulator-name = "aic_dvdd_fixed";
-		vin-supply = <&vdd_3v3>;
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-	};
-
-	vtt_fixed: fixedregulator-vtt {
-		/* TPS51200 */
-		compatible = "regulator-fixed";
-		regulator-name = "vtt_fixed";
-		vin-supply = <&smps3_reg>;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		regulator-boot-on;
-		enable-active-high;
-		gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&leds_pins_default>;
-
-		led@0 {
-			label = "beagle-x15:usr0";
-			gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-			default-state = "off";
-		};
-
-		led@1 {
-			label = "beagle-x15:usr1";
-			gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "cpu0";
-			default-state = "off";
-		};
-
-		led@2 {
-			label = "beagle-x15:usr2";
-			gpios = <&gpio7 14 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "mmc0";
-			default-state = "off";
-		};
-
-		led@3 {
-			label = "beagle-x15:usr3";
-			gpios = <&gpio7 15 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "disk-activity";
-			default-state = "off";
-		};
-	};
-
-	gpio_fan: gpio_fan {
-		/* Based on 5v 500mA AFB02505HHB */
-		compatible = "gpio-fan";
-		gpios =  <&tps659038_gpio 2 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <0     0>,
-				     <13000 1>;
-		#cooling-cells = <2>;
-	};
-
-	hdmi0: connector {
-		compatible = "hdmi-connector";
-		label = "hdmi";
-
-		type = "a";
-
-		port {
-			hdmi_connector_in: endpoint {
-				remote-endpoint = <&tpd12s015_out>;
-			};
-		};
-	};
-
-	tpd12s015: encoder {
-		compatible = "ti,tpd12s015";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&tpd12s015_pins>;
-
-		gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>,	/* gpio7_10, CT CP HPD */
-			<&gpio6 28 GPIO_ACTIVE_HIGH>,	/* gpio6_28, LS OE */
-			<&gpio7 12 GPIO_ACTIVE_HIGH>;	/* gpio7_12/sp1_cs2, HPD */
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				tpd12s015_in: endpoint {
-					remote-endpoint = <&hdmi_out>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				tpd12s015_out: endpoint {
-					remote-endpoint = <&hdmi_connector_in>;
-				};
-			};
-		};
-	};
-
-	sound0: sound0 {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "BeagleBoard-X15";
-		simple-audio-card,widgets =
-			"Line", "Line Out",
-			"Line", "Line In";
-		simple-audio-card,routing =
-			"Line Out",	"LLOUT",
-			"Line Out",	"RLOUT",
-			"MIC2L",	"Line In",
-			"MIC2R",	"Line In";
-		simple-audio-card,format = "dsp_b";
-		simple-audio-card,bitclock-master = <&sound0_master>;
-		simple-audio-card,frame-master = <&sound0_master>;
-		simple-audio-card,bitclock-inversion;
-
-		simple-audio-card,cpu {
-			sound-dai = <&mcasp3>;
-		};
-
-		sound0_master: simple-audio-card,codec {
-			sound-dai = <&tlv320aic3104>;
-			clocks = <&clkout2_clk>;
-		};
-	};
 };
 
-&dra7_pmx_core {
-	leds_pins_default: leds_pins_default {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x37a8, PIN_OUTPUT | MUX_MODE14)	/* spi1_d1.gpio7_8 */
-			DRA7XX_CORE_IOPAD(0x37ac, PIN_OUTPUT | MUX_MODE14)	/* spi1_d0.gpio7_9 */
-			DRA7XX_CORE_IOPAD(0x37c0, PIN_OUTPUT | MUX_MODE14)	/* spi2_sclk.gpio7_14 */
-			DRA7XX_CORE_IOPAD(0x37c4, PIN_OUTPUT | MUX_MODE14)	/* spi2_d1.gpio7_15 */
-		>;
-	};
-
-	i2c1_pins_default: i2c1_pins_default {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3800, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda.sda */
-			DRA7XX_CORE_IOPAD(0x3804, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl.scl */
-		>;
-	};
-
-	hdmi_pins: pinmux_hdmi_pins {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3808, PIN_INPUT | MUX_MODE1)	/* i2c2_sda.hdmi1_ddc_scl */
-			DRA7XX_CORE_IOPAD(0x380c, PIN_INPUT | MUX_MODE1)	/* i2c2_scl.hdmi1_ddc_sda */
-		>;
-	};
-
-	i2c3_pins_default: i2c3_pins_default {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x36a4, PIN_INPUT| MUX_MODE10)	/* mcasp1_aclkx.i2c3_sda */
-			DRA7XX_CORE_IOPAD(0x36a8, PIN_INPUT| MUX_MODE10)	/* mcasp1_fsx.i2c3_scl */
-		>;
-	};
-
-	uart3_pins_default: uart3_pins_default {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT_SLEW | MUX_MODE2) /* uart2_ctsn.uart3_rxd */
-			DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT_SLEW | MUX_MODE1) /* uart2_rtsn.uart3_txd */
-		>;
-	};
-
-	mmc1_pins_default: mmc1_pins_default {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14)	/* mmc1sdcd.gpio219 */
-			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
-			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
-			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
-			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
-			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
-			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
-		>;
-	};
-
-	mmc2_pins_default: mmc2_pins_default {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
-			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
-			DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
-			DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
-			DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
-			DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
-			DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
-			DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
-			DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
-			DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
-		>;
-	};
-
-	cpsw_pins_default: cpsw_pins_default {
-		pinctrl-single,pins = <
-			/* Slave 1 */
-			DRA7XX_CORE_IOPAD(0x3650, PIN_OUTPUT | MUX_MODE0)	/* rgmii1_tclk */
-			DRA7XX_CORE_IOPAD(0x3654, PIN_OUTPUT | MUX_MODE0)	/* rgmii1_tctl */
-			DRA7XX_CORE_IOPAD(0x3658, PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td3 */
-			DRA7XX_CORE_IOPAD(0x365c, PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td2 */
-			DRA7XX_CORE_IOPAD(0x3660, PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td1 */
-			DRA7XX_CORE_IOPAD(0x3664, PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td0 */
-			DRA7XX_CORE_IOPAD(0x3668, PIN_INPUT | MUX_MODE0)	/* rgmii1_rclk */
-			DRA7XX_CORE_IOPAD(0x366c, PIN_INPUT | MUX_MODE0)	/* rgmii1_rctl */
-			DRA7XX_CORE_IOPAD(0x3670, PIN_INPUT | MUX_MODE0)	/* rgmii1_rd3 */
-			DRA7XX_CORE_IOPAD(0x3674, PIN_INPUT | MUX_MODE0)	/* rgmii1_rd2 */
-			DRA7XX_CORE_IOPAD(0x3678, PIN_INPUT | MUX_MODE0)	/* rgmii1_rd1 */
-			DRA7XX_CORE_IOPAD(0x367c, PIN_INPUT | MUX_MODE0)	/* rgmii1_rd0 */
-
-			/* Slave 2 */
-			DRA7XX_CORE_IOPAD(0x3598, PIN_OUTPUT | MUX_MODE3)	/* rgmii2_tclk */
-			DRA7XX_CORE_IOPAD(0x359c, PIN_OUTPUT | MUX_MODE3)	/* rgmii2_tctl */
-			DRA7XX_CORE_IOPAD(0x35a0, PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td3 */
-			DRA7XX_CORE_IOPAD(0x35a4, PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td2 */
-			DRA7XX_CORE_IOPAD(0x35a8, PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td1 */
-			DRA7XX_CORE_IOPAD(0x35ac, PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td0 */
-			DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT | MUX_MODE3)	/* rgmii2_rclk */
-			DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT | MUX_MODE3)	/* rgmii2_rctl */
-			DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT | MUX_MODE3)	/* rgmii2_rd3 */
-			DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT | MUX_MODE3)	/* rgmii2_rd2 */
-			DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT | MUX_MODE3)	/* rgmii2_rd1 */
-			DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT | MUX_MODE3)	/* rgmii2_rd0 */
-		>;
-
-	};
-
-	cpsw_pins_sleep: cpsw_pins_sleep {
-		pinctrl-single,pins = <
-			/* Slave 1 */
-			DRA7XX_CORE_IOPAD(0x3650, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x3654, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x3658, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x365c, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x3660, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x3664, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x3668, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x366c, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x3670, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x3674, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x3678, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x367c, PIN_INPUT | MUX_MODE15)
-
-			/* Slave 2 */
-			DRA7XX_CORE_IOPAD(0x3598, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x359c, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x35a0, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x35a4, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x35a8, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x35ac, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT | MUX_MODE15)
-		>;
-	};
-
-	davinci_mdio_pins_default: davinci_mdio_pins_default {
-		pinctrl-single,pins = <
-			/* MDIO */
-			DRA7XX_CORE_IOPAD(0x363c, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* mdio_mclk */
-			DRA7XX_CORE_IOPAD(0x3640, PIN_INPUT_PULLUP | MUX_MODE0)	/* mdio_d */
-		>;
-	};
-
-	davinci_mdio_pins_sleep: davinci_mdio_pins_sleep {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x363c, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x3640, PIN_INPUT | MUX_MODE15)
-		>;
-	};
-
-	tps659038_pins_default: tps659038_pins_default {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3818, PIN_INPUT_PULLUP | MUX_MODE14)	/* wakeup0.gpio1_0 */
-		>;
-	};
-
-	tmp102_pins_default: tmp102_pins_default {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x37c8, PIN_INPUT_PULLUP | MUX_MODE14)	/* spi2_d0.gpio7_16 */
-		>;
-	};
-
-	mcp79410_pins_default: mcp79410_pins_default {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3824, PIN_INPUT_PULLUP | MUX_MODE1)	/* wakeup3.sys_nirq1 */
-		>;
-	};
-
-	usb1_pins: pinmux_usb1_pins {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3680, PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
-		>;
-	};
-
-	tpd12s015_pins: pinmux_tpd12s015_pins {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x37b0, PIN_OUTPUT | MUX_MODE14)		/* gpio7_10 CT_CP_HPD */
-			DRA7XX_CORE_IOPAD(0x37b8, PIN_INPUT_PULLDOWN | MUX_MODE14)	/* gpio7_12 HPD */
-			DRA7XX_CORE_IOPAD(0x3770, PIN_OUTPUT | MUX_MODE14)		/* gpio6_28 LS_OE */
-		>;
-	};
-
-	clkout2_pins_default: clkout2_pins_default {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3694, PIN_OUTPUT_PULLDOWN | MUX_MODE9)	/* xref_clk0.clkout2 */
-		>;
-	};
-
-	clkout2_pins_sleep: clkout2_pins_sleep {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3694, PIN_INPUT | MUX_MODE15)	/* xref_clk0.clkout2 */
-		>;
-	};
-
-	mcasp3_pins_default: mcasp3_pins_default {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3724, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx.mcasp3_aclkx */
-			DRA7XX_CORE_IOPAD(0x3728, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx.mcasp3_fsx */
-			DRA7XX_CORE_IOPAD(0x372c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr0.mcasp3_axr0 */
-			DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr1.mcasp3_axr1 */
-		>;
-	};
-
-	mcasp3_pins_sleep: mcasp3_pins_sleep {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3724, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x3728, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x372c, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT | MUX_MODE15)
-		>;
-	};
-};
-
-&i2c1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_default>;
-	clock-frequency = <400000>;
-
-	tps659038: tps659038@58 {
-		compatible = "ti,tps659038";
-		reg = <0x58>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&tps659038_pins_default>;
-
-		#interrupt-cells = <2>;
-		interrupt-controller;
-
-		ti,system-power-controller;
-
-		tps659038_pmic {
-			compatible = "ti,tps659038-pmic";
-
-			regulators {
-				smps12_reg: smps12 {
-					/* VDD_MPU */
-					regulator-name = "smps12";
-					regulator-min-microvolt = < 850000>;
-					regulator-max-microvolt = <1250000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps3_reg: smps3 {
-					/* VDD_DDR */
-					regulator-name = "smps3";
-					regulator-min-microvolt = <1350000>;
-					regulator-max-microvolt = <1350000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps45_reg: smps45 {
-					/* VDD_DSPEVE, VDD_IVA, VDD_GPU */
-					regulator-name = "smps45";
-					regulator-min-microvolt = < 850000>;
-					regulator-max-microvolt = <1250000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps6_reg: smps6 {
-					/* VDD_CORE */
-					regulator-name = "smps6";
-					regulator-min-microvolt = <850000>;
-					regulator-max-microvolt = <1150000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				/* SMPS7 unused */
-
-				smps8_reg: smps8 {
-					/* VDD_1V8 */
-					regulator-name = "smps8";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				/* SMPS9 unused */
-
-				ldo1_reg: ldo1 {
-					/* VDD_SD / VDDSHV8  */
-					regulator-name = "ldo1";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-boot-on;
-					regulator-always-on;
-				};
-
-				ldo2_reg: ldo2 {
-					/* VDD_SHV5 */
-					regulator-name = "ldo2";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo3_reg: ldo3 {
-					/* VDDA_1V8_PHYA */
-					regulator-name = "ldo3";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo4_reg: ldo4 {
-					/* VDDA_1V8_PHYB */
-					regulator-name = "ldo4";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo9_reg: ldo9 {
-					/* VDD_RTC */
-					regulator-name = "ldo9";
-					regulator-min-microvolt = <1050000>;
-					regulator-max-microvolt = <1050000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldoln_reg: ldoln {
-					/* VDDA_1V8_PLL */
-					regulator-name = "ldoln";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldousb_reg: ldousb {
-					/* VDDA_3V_USB: VDDA_USBHS33 */
-					regulator-name = "ldousb";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-boot-on;
-				};
-
-				regen1: regen1 {
-					/* VDD_3V3_ON */
-					regulator-name = "regen1";
-					regulator-boot-on;
-					regulator-always-on;
-				};
-			};
-		};
-
-		tps659038_rtc: tps659038_rtc {
-			compatible = "ti,palmas-rtc";
-			interrupt-parent = <&tps659038>;
-			interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
-			wakeup-source;
-		};
-
-		tps659038_pwr_button: tps659038_pwr_button {
-			compatible = "ti,palmas-pwrbutton";
-			interrupt-parent = <&tps659038>;
-			interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
-			wakeup-source;
-			ti,palmas-long-press-seconds = <12>;
-		};
-
-		tps659038_gpio: tps659038_gpio {
-			compatible = "ti,palmas-gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		extcon_usb2: tps659038_usb {
-			compatible = "ti,palmas-usb-vid";
-			ti,enable-vbus-detection;
-			vbus-gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
-		};
-
-	};
-
-	tmp102: tmp102@48 {
-		compatible = "ti,tmp102";
-		reg = <0x48>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&tmp102_pins_default>;
-		interrupt-parent = <&gpio7>;
-		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
-		#thermal-sensor-cells = <1>;
-	};
-
-	tlv320aic3104: tlv320aic3104@18 {
-		#sound-dai-cells = <0>;
-		compatible = "ti,tlv320aic3104";
-		reg = <0x18>;
-		pinctrl-names = "default", "sleep";
-		pinctrl-0 = <&clkout2_pins_default>;
-		pinctrl-1 = <&clkout2_pins_sleep>;
-		assigned-clocks = <&clkoutmux2_clk_mux>;
-		assigned-clock-parents = <&sys_clk2_dclk_div>;
-
-		status = "okay";
-		adc-settle-ms = <40>;
-
-		AVDD-supply = <&vdd_3v3>;
-		IOVDD-supply = <&vdd_3v3>;
-		DRVDD-supply = <&vdd_3v3>;
-		DVDD-supply = <&aic_dvdd>;
-	};
-
-	eeprom: eeprom@50 {
-		compatible = "at,24c32";
-		reg = <0x50>;
-	};
-};
-
-&i2c3 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c3_pins_default>;
-	clock-frequency = <400000>;
-
-	mcp_rtc: rtc@6f {
-		compatible = "microchip,mcp7941x";
-		reg = <0x6f>;
-		interrupts-extended = <&crossbar_mpu GIC_SPI 2 IRQ_TYPE_EDGE_RISING>,
-				      <&dra7_pmx_core 0x424>;
-		interrupt-names = "irq", "wakeup";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&mcp79410_pins_default>;
-
-		vcc-supply = <&vdd_3v3>;
-		wakeup-source;
-	};
-};
-
-&gpio7 {
-	ti,no-reset-on-init;
-	ti,no-idle-on-init;
-};
-
-&cpu0 {
-	cpu0-supply = <&smps12_reg>;
-	voltage-tolerance = <1>;
-};
-
-&uart3 {
-	status = "okay";
-	interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
-			      <&dra7_pmx_core 0x3f8>;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins_default>;
-};
-
-&mac {
-	status = "okay";
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&cpsw_pins_default>;
-	pinctrl-1 = <&cpsw_pins_sleep>;
-	dual_emac;
-};
-
-&cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <1>;
-	phy-mode = "rgmii";
-	dual_emac_res_vlan = <1>;
-};
-
-&cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <2>;
-	phy-mode = "rgmii";
-	dual_emac_res_vlan = <2>;
-};
-
-&davinci_mdio {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&davinci_mdio_pins_default>;
-	pinctrl-1 = <&davinci_mdio_pins_sleep>;
+&tpd12s015 {
+	gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>,	/* gpio7_10, CT CP HPD */
+		<&gpio6 28 GPIO_ACTIVE_HIGH>,	/* gpio6_28, LS OE */
+		<&gpio7 12 GPIO_ACTIVE_HIGH>;	/* gpio7_12/sp1_cs2, HPD */
 };
 
 &mmc1 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins_default>;
-
 	vmmc-supply = <&ldo1_reg>;
-	bus-width = <4>;
-	cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */
-};
-
-&mmc2 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_pins_default>;
-
-	vmmc-supply = <&vdd_3v3>;
-	bus-width = <8>;
-	ti,non-removable;
-	cap-mmc-dual-data-rate;
-};
-
-&sata {
-	status = "okay";
-};
-
-&usb2_phy1 {
-	phy-supply = <&ldousb_reg>;
-};
-
-&usb2_phy2 {
-	phy-supply = <&ldousb_reg>;
-};
-
-&usb1 {
-	dr_mode = "host";
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb1_pins>;
-};
-
-&omap_dwc3_2 {
-	extcon = <&extcon_usb2>;
-};
-
-&usb2 {
-	/*
-	 * Stand alone usage is peripheral only.
-	 * However, with some resistor modifications
-	 * this port can be used via expansion connectors
-	 * as "host" or "dual-role". If so, provide
-	 * the necessary dr_mode override in the expansion
-	 * board's DT.
-	 */
-	dr_mode = "peripheral";
-};
-
-&cpu_trips {
-	cpu_alert1: cpu_alert1 {
-		temperature = <50000>; /* millicelsius */
-		hysteresis = <2000>; /* millicelsius */
-		type = "active";
-	};
-};
-
-&cpu_cooling_maps {
-	map1 {
-		trip = <&cpu_alert1>;
-		cooling-device = <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-	};
-};
-
-&thermal_zones {
-	board_thermal: board_thermal {
-		polling-delay-passive = <1250>; /* milliseconds */
-		polling-delay = <1500>; /* milliseconds */
-
-				/* sensor       ID */
-		thermal-sensors = <&tmp102     0>;
-
-		board_trips: trips {
-			board_alert0: board_alert {
-				temperature = <40000>; /* millicelsius */
-				hysteresis = <2000>; /* millicelsius */
-				type = "active";
-			};
-
-			board_crit: board_crit {
-				temperature = <105000>; /* millicelsius */
-				hysteresis = <0>; /* millicelsius */
-				type = "critical";
-			};
-		};
-
-		board_cooling_maps: cooling-maps {
-			map0 {
-				trip = <&board_alert0>;
-				cooling-device =
-				  <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-			};
-		};
-       };
-};
-
-&dss {
-	status = "ok";
-
-	vdda_video-supply = <&ldoln_reg>;
-};
-
-&hdmi {
-	status = "ok";
-	vdda-supply = <&ldo4_reg>;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&hdmi_pins>;
-
-	port {
-		hdmi_out: endpoint {
-			remote-endpoint = <&tpd12s015_in>;
-		};
-	};
-};
-
-&pcie1 {
-	gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
-};
-
-&mcasp3 {
-	#sound-dai-cells = <0>;
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&mcasp3_pins_default>;
-	pinctrl-1 = <&mcasp3_pins_sleep>;
-	assigned-clocks = <&mcasp3_ahclkx_mux>;
-	assigned-clock-parents = <&sys_clkin2>;
-	status = "okay";
-
-	op-mode = <0>;	/* MCASP_IIS_MODE */
-	tdm-slots = <2>;
-	/* 4 serializers */
-	serial-dir = <	/* 0: INACTIVE, 1: TX, 2: RX */
-		1 2 0 0
-	>;
-	tx-num-evt = <32>;
-	rx-num-evt = <32>;
-};
-
-&mailbox5 {
-	status = "okay";
-	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
-		status = "okay";
-	};
-	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
-		status = "okay";
-	};
-};
-
-&mailbox6 {
-	status = "okay";
-	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
-		status = "okay";
-	};
-	mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
-		status = "okay";
-	};
 };
diff --git a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
index 378b142..203266f 100644
--- a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
+++ b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
@@ -19,7 +19,7 @@
 	model = "CompuLab CL-SOM-AM57x";
 	compatible = "compulab,cl-som-am57x", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7";
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x80000000 0x0 0x20000000>; /* 512 MB - minimal configuration */
 	};
@@ -29,7 +29,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&leds_pins_default>;
 
-		led@0 {
+		led0 {
 			label = "cl-som-am57x:green";
 			gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi
index 0e63b9d..03cec62 100644
--- a/arch/arm/boot/dts/am57xx-idk-common.dtsi
+++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi
@@ -304,3 +304,52 @@
 	ti,non-removable;
 	max-frequency = <96000000>;
 };
+
+&qspi {
+	status = "okay";
+
+	spi-max-frequency = <76800000>;
+	m25p80@0 {
+		compatible = "s25fl256s1", "jedec,spi-nor";
+		spi-max-frequency = <76800000>;
+		reg = <0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* MTD partition table.
+		 * The ROM checks the first four physical blocks
+		 * for a valid file to boot and the flash here is
+		 * 64KiB block size.
+		 */
+		partition@0 {
+			label = "QSPI.SPL";
+			reg = <0x00000000 0x000040000>;
+		};
+		partition@1 {
+			label = "QSPI.u-boot";
+			reg = <0x00040000 0x00100000>;
+		};
+		partition@2 {
+			label = "QSPI.u-boot-spl-os";
+			reg = <0x00140000 0x00080000>;
+		};
+		partition@3 {
+			label = "QSPI.u-boot-env";
+			reg = <0x001c0000 0x00010000>;
+		};
+		partition@4 {
+			label = "QSPI.u-boot-env.backup1";
+			reg = <0x001d0000 0x0010000>;
+		};
+		partition@5 {
+			label = "QSPI.kernel";
+			reg = <0x001e0000 0x0800000>;
+		};
+		partition@6 {
+			label = "QSPI.file-system";
+			reg = <0x009e0000 0x01620000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/arm-realview-eb-11mp-bbrevd-ctrevb.dts b/arch/arm/boot/dts/arm-realview-eb-11mp-bbrevd-ctrevb.dts
new file mode 100644
index 0000000..e18769d
--- /dev/null
+++ b/arch/arm/boot/dts/arm-realview-eb-11mp-bbrevd-ctrevb.dts
@@ -0,0 +1,32 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "arm-realview-eb-11mp-ctrevb.dts"
+#include "arm-realview-eb-bbrevd.dtsi"
+
+/*
+ * This is the EB with the new Revision D baseboard with SMSC9118 ethernet and
+ * the Rev B core tile.
+ */
+/ {
+	model = "ARM RealView Emulation Baseboard Rev D with ARM11MPCore Core Tile Rev B";
+};
diff --git a/arch/arm/boot/dts/arm-realview-eb-11mp-bbrevd.dts b/arch/arm/boot/dts/arm-realview-eb-11mp-bbrevd.dts
new file mode 100644
index 0000000..26b1c69
--- /dev/null
+++ b/arch/arm/boot/dts/arm-realview-eb-11mp-bbrevd.dts
@@ -0,0 +1,28 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "arm-realview-eb-11mp.dts"
+#include "arm-realview-eb-bbrevd.dtsi"
+
+/ {
+	model = "ARM RealView Emulation Baseboard Rev D with ARM11MPCore Rev C Core Tile";
+};
diff --git a/arch/arm/boot/dts/arm-realview-eb-11mp-revb.dts b/arch/arm/boot/dts/arm-realview-eb-11mp-ctrevb.dts
similarity index 100%
rename from arch/arm/boot/dts/arm-realview-eb-11mp-revb.dts
rename to arch/arm/boot/dts/arm-realview-eb-11mp-ctrevb.dts
diff --git a/arch/arm/boot/dts/arm-realview-eb-11mp.dts b/arch/arm/boot/dts/arm-realview-eb-11mp.dts
index 87ff602..aac1edd 100644
--- a/arch/arm/boot/dts/arm-realview-eb-11mp.dts
+++ b/arch/arm/boot/dts/arm-realview-eb-11mp.dts
@@ -24,7 +24,7 @@
 #include "arm-realview-eb-mp.dtsi"
 
 / {
-	model = "ARM RealView Emulation Baseboard with ARM11MPCore Rev C";
+	model = "ARM RealView Emulation Baseboard with ARM11MPCore Rev C Core Tile";
 	arm,hbi = <0x146>;
 
 	/*
diff --git a/arch/arm/boot/dts/arm-realview-eb-a9mp-bbrevd.dts b/arch/arm/boot/dts/arm-realview-eb-a9mp-bbrevd.dts
new file mode 100644
index 0000000..42efac7
--- /dev/null
+++ b/arch/arm/boot/dts/arm-realview-eb-a9mp-bbrevd.dts
@@ -0,0 +1,28 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "arm-realview-eb-a9mp.dts"
+#include "arm-realview-eb-bbrevd.dtsi"
+
+/ {
+	model = "ARM RealView EB Baseboard Rev D Cortex A9 MPCore";
+};
diff --git a/arch/arm/boot/dts/arm-realview-eb-bbrevd.dts b/arch/arm/boot/dts/arm-realview-eb-bbrevd.dts
new file mode 100644
index 0000000..f533c8b4
--- /dev/null
+++ b/arch/arm/boot/dts/arm-realview-eb-bbrevd.dts
@@ -0,0 +1,29 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+/* This derives from the Realview Baseboard, and overlays the new ethernet */
+#include "arm-realview-eb.dts"
+#include "arm-realview-eb-bbrevd.dtsi"
+
+/ {
+	model = "ARM RealView Emulation Baseboard Rev D";
+};
diff --git a/arch/arm/boot/dts/arm-realview-eb-bbrevd.dtsi b/arch/arm/boot/dts/arm-realview-eb-bbrevd.dtsi
new file mode 100644
index 0000000..a79e1d1
--- /dev/null
+++ b/arch/arm/boot/dts/arm-realview-eb-bbrevd.dtsi
@@ -0,0 +1,45 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+/ {
+	/* Introduce a fixed regulator for the new ethernet controller */
+	veth: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "veth";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+	};
+};
+
+/*
+ * The revision D has a different ethernet controller that the elder boards:
+ * the older board uses LAN91C111 but the new one uses LAN9118.
+ */
+&ethernet {
+	compatible = "smsc,lan9118", "smsc,lan9115";
+	phy-mode = "mii";
+	smsc,irq-active-high;
+	smsc,irq-push-pull;
+	vdd33a-supply = <&veth>;
+	vddvario-supply = <&veth>;
+};
diff --git a/arch/arm/boot/dts/arm-realview-eb.dtsi b/arch/arm/boot/dts/arm-realview-eb.dtsi
index 1c6a040..e2e9599 100644
--- a/arch/arm/boot/dts/arm-realview-eb.dtsi
+++ b/arch/arm/boot/dts/arm-realview-eb.dtsi
@@ -51,14 +51,6 @@
 		regulator-boot-on;
         };
 
-	veth: fixedregulator@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "veth";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-	};
-
 	xtal24mhz: xtal24mhz@24M {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
@@ -134,16 +126,15 @@
 		bank-width = <4>;
 	};
 
-	/* SMSC 9118 ethernet with PHY and EEPROM */
+	/* SMSC LAN91C111 ethernet with PHY and EEPROM */
 	ethernet: ethernet@4e000000 {
-		compatible = "smsc,lan9118", "smsc,lan9115";
+		compatible = "smsc,lan91c111";
 		reg = <0x4e000000 0x10000>;
-		phy-mode = "mii";
-		reg-io-width = <4>;
-		smsc,irq-active-high;
-		smsc,irq-push-pull;
-		vdd33a-supply = <&veth>;
-		vddvario-supply = <&veth>;
+		/*
+		 * This means the adapter can be accessed with 8, 16 or
+		 * 32 bit reads/writes.
+		 */
+		reg-io-width = <7>;
 	};
 
 	usb: usb@4f000000 {
diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts
index 2364fc5..033fa63 100644
--- a/arch/arm/boot/dts/armada-370-db.dts
+++ b/arch/arm/boot/dts/armada-370-db.dts
@@ -155,20 +155,6 @@
 				status = "okay";
 			};
 
-			spi0: spi@10600 {
-				pinctrl-0 = <&spi0_pins2>;
-				pinctrl-names = "default";
-				status = "okay";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "mx25l25635e", "jedec,spi-nor";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <50000000>;
-				};
-			};
-
 			nand@d0000 {
 				status = "okay";
 				num-cs = <1>;
@@ -274,3 +260,18 @@
 		compatible = "linux,spdif-dir";
 	};
 };
+
+&spi0 {
+	pinctrl-0 = <&spi0_pins2>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "mx25l25635e", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <50000000>;
+	};
+};
+
diff --git a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
index 1aba08e..01cded3 100644
--- a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
+++ b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
@@ -68,26 +68,6 @@
 				phy-mode = "rgmii-id";
 			};
 
-			spi@10600 {
-				status = "okay";
-				pinctrl-0 = <&spi0_pins2>;
-				pinctrl-names = "default";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					/* MX25L8006E */
-					compatible = "mxicy,mx25l8005", "jedec,spi-nor";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <50000000>;
-
-					partition@0 {
-						label = "u-boot";
-						reg = <0x0 0x100000>;
-					};
-				};
-			};
-
 			usb@50000 {
 				status = "okay";
 			};
@@ -176,3 +156,23 @@
 		marvell,function = "gpio";
 	};
 };
+
+&spi0 {
+	status = "okay";
+	pinctrl-0 = <&spi0_pins2>;
+	pinctrl-names = "default";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		/* MX25L8006E */
+		compatible = "mxicy,mx25l8005", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <50000000>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0 0x100000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-370-synology-ds213j.dts b/arch/arm/boot/dts/armada-370-synology-ds213j.dts
index 8ca7a43..a9cc427 100644
--- a/arch/arm/boot/dts/armada-370-synology-ds213j.dts
+++ b/arch/arm/boot/dts/armada-370-synology-ds213j.dts
@@ -87,62 +87,6 @@
 				status = "disabled";
 			};
 
-			spi0: spi@10600 {
-				status = "okay";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "micron,n25q064", "jedec,spi-nor";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <20000000>;
-
-					/*
-					 * Warning!
-					 *
-					 * Synology u-boot uses its compiled-in environment
-					 * and it seems Synology did not care to change u-boot
-					 * default configuration in order to allow saving a
-					 * modified environment at a sensible location. So,
-					 * if you do a 'saveenv' under u-boot, your modified
-					 * environment will be saved at 1MB after the start
-					 * of the flash, i.e. in the middle of the uImage.
-					 * For that reason, it is strongly advised not to
-					 * change the default environment, unless you know
-					 * what you are doing.
-					 */
-					partition@00000000 { /* u-boot */
-						label = "RedBoot";
-						reg = <0x00000000 0x000c0000>; /* 768KB */
-					};
-
-					partition@000c0000 { /* uImage */
-						label = "zImage";
-						reg = <0x000c0000 0x002d0000>; /* 2880KB */
-					};
-
-					partition@00390000 { /* uInitramfs */
-						label = "rd.gz";
-						reg = <0x00390000 0x00440000>; /* 4250KB */
-					};
-
-					partition@007d0000 { /* MAC address and serial number */
-						label = "vendor";
-						reg = <0x007d0000 0x00010000>; /* 64KB */
-					};
-
-					partition@007e0000 {
-						label = "RedBoot config";
-						reg = <0x007e0000 0x00010000>; /* 64KB */
-					};
-
-					partition@007f0000 {
-						label = "FIS directory";
-						reg = <0x007f0000 0x00010000>; /* 64KB */
-					};
-				};
-			};
-
 			i2c@11000 {
 				compatible = "marvell,mv64xxx-i2c";
 				pinctrl-0 = <&i2c0_pins>;
@@ -347,3 +291,59 @@
 		marvell,function = "gpio";
 	};
 };
+
+&spi0 {
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,n25q064", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <20000000>;
+
+		/*
+		 * Warning!
+		 *
+		 * Synology u-boot uses its compiled-in environment
+		 * and it seems Synology did not care to change u-boot
+		 * default configuration in order to allow saving a
+		 * modified environment at a sensible location. So,
+		 * if you do a 'saveenv' under u-boot, your modified
+		 * environment will be saved at 1MB after the start
+		 * of the flash, i.e. in the middle of the uImage.
+		 * For that reason, it is strongly advised not to
+		 * change the default environment, unless you know
+		 * what you are doing.
+		 */
+		partition@00000000 { /* u-boot */
+			label = "RedBoot";
+			reg = <0x00000000 0x000c0000>; /* 768KB */
+		};
+
+		partition@000c0000 { /* uImage */
+			label = "zImage";
+			reg = <0x000c0000 0x002d0000>; /* 2880KB */
+		};
+
+		partition@00390000 { /* uInitramfs */
+			label = "rd.gz";
+			reg = <0x00390000 0x00440000>; /* 4250KB */
+		};
+
+		partition@007d0000 { /* MAC address and serial number */
+			label = "vendor";
+			reg = <0x007d0000 0x00010000>; /* 64KB */
+		};
+
+		partition@007e0000 {
+			label = "RedBoot config";
+			reg = <0x007e0000 0x00010000>; /* 64KB */
+		};
+
+		partition@007f0000 {
+			label = "FIS directory";
+			reg = <0x007f0000 0x00010000>; /* 64KB */
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi
index a718866..3ccedc9 100644
--- a/arch/arm/boot/dts/armada-370-xp.dtsi
+++ b/arch/arm/boot/dts/armada-370-xp.dtsi
@@ -148,26 +148,6 @@
 				interrupts = <50>;
 			};
 
-			spi0: spi@10600 {
-				reg = <0x10600 0x28>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <0>;
-				interrupts = <30>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			spi1: spi@10680 {
-				reg = <0x10680 0x28>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <1>;
-				interrupts = <92>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
 			i2c0: i2c@11000 {
 				compatible = "marvell,mv64xxx-i2c";
 				#address-cells = <1>;
@@ -320,6 +300,42 @@
 				status = "disabled";
 			};
 		};
+
+		spi0: spi@10600 {
+			reg = <MBUS_ID(0xf0, 0x01) 0x10600 0x28>, /* control */
+			      <MBUS_ID(0x01, 0x1e) 0 0xffffffff>, /* CS0 */
+			      <MBUS_ID(0x01, 0x5e) 0 0xffffffff>, /* CS1 */
+			      <MBUS_ID(0x01, 0x9e) 0 0xffffffff>, /* CS2 */
+			      <MBUS_ID(0x01, 0xde) 0 0xffffffff>, /* CS3 */
+			      <MBUS_ID(0x01, 0x1f) 0 0xffffffff>, /* CS4 */
+			      <MBUS_ID(0x01, 0x5f) 0 0xffffffff>, /* CS5 */
+			      <MBUS_ID(0x01, 0x9f) 0 0xffffffff>, /* CS6 */
+			      <MBUS_ID(0x01, 0xdf) 0 0xffffffff>; /* CS7 */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			interrupts = <30>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		spi1: spi@10680 {
+			reg = <MBUS_ID(0xf0, 0x01) 0x10680 0x28>, /* control */
+			      <MBUS_ID(0x01, 0x1a) 0 0xffffffff>, /* CS0 */
+			      <MBUS_ID(0x01, 0x5a) 0 0xffffffff>, /* CS1 */
+			      <MBUS_ID(0x01, 0x9a) 0 0xffffffff>, /* CS2 */
+			      <MBUS_ID(0x01, 0xda) 0 0xffffffff>, /* CS3 */
+			      <MBUS_ID(0x01, 0x1b) 0 0xffffffff>, /* CS4 */
+			      <MBUS_ID(0x01, 0x5b) 0 0xffffffff>, /* CS5 */
+			      <MBUS_ID(0x01, 0x9b) 0 0xffffffff>, /* CS6 */
+			      <MBUS_ID(0x01, 0xdb) 0 0xffffffff>; /* CS7 */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			interrupts = <92>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
 	};
 
 	clocks {
diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
index 3b06aa8..b425810 100644
--- a/arch/arm/boot/dts/armada-370.dtsi
+++ b/arch/arm/boot/dts/armada-370.dtsi
@@ -134,24 +134,6 @@
 				wt-override;
 			};
 
-			/*
-			 * Default SPI pinctrl setting, can be overwritten on
-			 * board level if a different configuration is used.
-			 */
-			spi0: spi@10600 {
-				compatible = "marvell,armada-370-spi",
-						"marvell,orion-spi";
-				pinctrl-0 = <&spi0_pins1>;
-				pinctrl-names = "default";
-			};
-
-			spi1: spi@10680 {
-				compatible = "marvell,armada-370-spi",
-						"marvell,orion-spi";
-				pinctrl-0 = <&spi1_pins>;
-				pinctrl-names = "default";
-			};
-
 			i2c0: i2c@11000 {
 				reg = <0x11000 0x20>;
 			};
@@ -447,3 +429,19 @@
 		marvell,function = "ge1";
 	};
 };
+
+/*
+ * Default SPI pinctrl setting, can be overwritten on
+ * board level if a different configuration is used.
+ */
+&spi0 {
+	compatible = "marvell,armada-370-spi", "marvell,orion-spi";
+	pinctrl-0 = <&spi0_pins1>;
+	pinctrl-names = "default";
+};
+
+&spi1 {
+	compatible = "marvell,armada-370-spi", "marvell,orion-spi";
+	pinctrl-0 = <&spi1_pins>;
+	pinctrl-names = "default";
+};
diff --git a/arch/arm/boot/dts/armada-385-db-ap.dts b/arch/arm/boot/dts/armada-385-db-ap.dts
index 2d3fd6e..db5b9f6 100644
--- a/arch/arm/boot/dts/armada-385-db-ap.dts
+++ b/arch/arm/boot/dts/armada-385-db-ap.dts
@@ -65,20 +65,6 @@
 			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
 
 		internal-regs {
-			spi1: spi@10680 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&spi1_pins>;
-				status = "okay";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "st,m25p128", "jedec,spi-nor";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <54000000>;
-				};
-			};
-
 			i2c0: i2c@11000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&i2c0_pins>;
@@ -155,6 +141,10 @@
 				bm,pool-short = <3>;
 			};
 
+			usb@58000 {
+				status = "okay";
+			};
+
 			/* CON4 */
 			ethernet@70000 {
 				pinctrl-names = "default";
@@ -178,15 +168,35 @@
 
 			nfc: flash@d0000 {
 				status = "okay";
-				#address-cells = <1>;
-				#size-cells = <1>;
-
 				num-cs = <1>;
 				nand-ecc-strength = <4>;
 				nand-ecc-step-size = <512>;
 				marvell,nand-keep-config;
 				marvell,nand-enable-arbiter;
 				nand-on-flash-bbt;
+
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					partition@0 {
+						label = "U-Boot";
+						reg = <0x00000000 0x00800000>;
+						read-only;
+					};
+
+					partition@800000 {
+						label = "uImage";
+						reg = <0x00800000 0x00400000>;
+						read-only;
+					};
+
+					partition@c00000 {
+						label = "Root";
+						reg = <0x00c00000 0x3f400000>;
+					};
+				};
 			};
 
 			usb3@f0000 {
@@ -239,3 +249,17 @@
 		gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
 	};
 };
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins>;
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p128", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <54000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi b/arch/arm/boot/dts/armada-385-linksys.dtsi
index 22f7a13..8f0e508 100644
--- a/arch/arm/boot/dts/armada-385-linksys.dtsi
+++ b/arch/arm/boot/dts/armada-385-linksys.dtsi
@@ -62,11 +62,6 @@
 			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
 
 		internal-regs {
-
-			spi@10600 {
-				status = "disabled";
-			};
-
 			i2c@11000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&i2c0_pins>;
@@ -332,3 +327,7 @@
 		marvell,function = "gpio";
 	};
 };
+
+&spi0 {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/armada-388-clearfog.dts b/arch/arm/boot/dts/armada-388-clearfog.dts
index d3e6bd8..71ce201 100644
--- a/arch/arm/boot/dts/armada-388-clearfog.dts
+++ b/arch/arm/boot/dts/armada-388-clearfog.dts
@@ -315,30 +315,6 @@
 				status = "okay";
 			};
 
-			spi@10680 {
-				/*
-				 * We don't seem to have the W25Q32 on the
-				 * A1 Rev 2.0 boards, so disable SPI.
-				 * CS0: W25Q32 (doesn't appear to be present)
-				 * CS1:
-				 * CS2: mikrobus
-				 */
-				pinctrl-0 = <&spi1_pins
-					     &clearfog_spi1_cs_pins
-					     &mikro_spi_pins>;
-				pinctrl-names = "default";
-				status = "okay";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					compatible = "w25q32", "jedec,spi-nor";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <3000000>;
-					status = "disabled";
-				};
-			};
-
 			usb@58000 {
 				/* CON3, nearest  power. */
 				status = "okay";
@@ -444,3 +420,27 @@
 		};
 	};
 };
+
+&spi1 {
+	/*
+	 * We don't seem to have the W25Q32 on the
+	 * A1 Rev 2.0 boards, so disable SPI.
+	 * CS0: W25Q32 (doesn't appear to be present)
+	 * CS1:
+	 * CS2: mikrobus
+	 */
+	pinctrl-0 = <&spi1_pins
+		     &clearfog_spi1_cs_pins
+		     &mikro_spi_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "w25q32", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <3000000>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/armada-388-db.dts b/arch/arm/boot/dts/armada-388-db.dts
index ea93ed7..de26c76 100644
--- a/arch/arm/boot/dts/armada-388-db.dts
+++ b/arch/arm/boot/dts/armada-388-db.dts
@@ -70,18 +70,6 @@
 			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
 
 		internal-regs {
-			spi@10600 {
-				status = "okay";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "w25q32", "jedec,spi-nor";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <108000000>;
-				};
-			};
-
 			i2c@11000 {
 				status = "okay";
 				clock-frequency = <100000>;
@@ -201,3 +189,16 @@
 		};
 	};
 };
+
+&spi0 {
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "w25q32", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <108000000>;
+	};
+};
+
diff --git a/arch/arm/boot/dts/armada-388-gp.dts b/arch/arm/boot/dts/armada-388-gp.dts
index fd75e5e..895fa6c 100644
--- a/arch/arm/boot/dts/armada-388-gp.dts
+++ b/arch/arm/boot/dts/armada-388-gp.dts
@@ -64,21 +64,6 @@
 			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
 
 		internal-regs {
-			spi@10600 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&spi0_pins>;
-				status = "okay";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "st,m25p128", "jedec,spi-nor";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <50000000>;
-					m25p,fast-read;
-				};
-			};
-
 			i2c@11000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&i2c0_pins>;
@@ -433,3 +418,18 @@
 		marvell,function = "gpio";
 	};
 };
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p128", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <50000000>;
+		m25p,fast-read;
+	};
+};
diff --git a/arch/arm/boot/dts/armada-388-rd.dts b/arch/arm/boot/dts/armada-388-rd.dts
index 853f973..dd3462dd 100644
--- a/arch/arm/boot/dts/armada-388-rd.dts
+++ b/arch/arm/boot/dts/armada-388-rd.dts
@@ -70,18 +70,6 @@
 			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
 
 		internal-regs {
-			spi@10600 {
-				status = "okay";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "st,m25p128", "jedec,spi-nor";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <108000000>;
-				};
-			};
-
 			i2c@11000 {
 				status = "okay";
 				clock-frequency = <100000>;
@@ -142,3 +130,16 @@
 		};
 	};
 };
+
+&spi0 {
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p128", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <108000000>;
+	};
+};
+
diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi
index 3312be6..2d76688 100644
--- a/arch/arm/boot/dts/armada-38x.dtsi
+++ b/arch/arm/boot/dts/armada-38x.dtsi
@@ -170,30 +170,6 @@
 				      <0xc100 0x100>;
 			};
 
-			spi0: spi@10600 {
-				compatible = "marvell,armada-380-spi",
-						"marvell,orion-spi";
-				reg = <0x10600 0x50>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <0>;
-				interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			spi1: spi@10680 {
-				compatible = "marvell,armada-380-spi",
-						"marvell,orion-spi";
-				reg = <0x10680 0x50>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <1>;
-				interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
 			i2c0: i2c@11000 {
 				compatible = "marvell,mv64xxx-i2c";
 				reg = <0x11000 0x20>;
@@ -287,6 +263,15 @@
 					marvell,function = "spi1";
 				};
 
+				nand_pins: nand-pins {
+					marvell,pins = "mpp22", "mpp34", "mpp23",
+						       "mpp33", "mpp38", "mpp28",
+						       "mpp40", "mpp42", "mpp35",
+						       "mpp36", "mpp25", "mpp30",
+						       "mpp32";
+					marvell,function = "dev";
+				};
+
 				uart0_pins: uart-pins-0 {
 					marvell,pins = "mpp0", "mpp1";
 					marvell,function = "ua0";
@@ -649,6 +634,30 @@
 			no-memory-wc;
 			status = "disabled";
 		};
+
+		spi0: spi@10600 {
+			compatible = "marvell,armada-380-spi",
+					"marvell,orion-spi";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10600 0x50>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		spi1: spi@10680 {
+			compatible = "marvell,armada-380-spi",
+					"marvell,orion-spi";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10680 0x50>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
 	};
 
 	clocks {
diff --git a/arch/arm/boot/dts/armada-390-db.dts b/arch/arm/boot/dts/armada-390-db.dts
new file mode 100644
index 0000000..34e279d
--- /dev/null
+++ b/arch/arm/boot/dts/armada-390-db.dts
@@ -0,0 +1,175 @@
+/*
+ * Device Tree file for Marvell Armada 390 Development Board
+ * (DB-88F6920)
+ *
+ * Copyright (C) 2016 Marvell
+ *
+ * Grzegorz Jaszczyk <jaz@semihalf.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "armada-390.dtsi"
+
+/ {
+	model = "Marvell Armada 390 Development Board";
+	compatible = "marvell,a390-db", "marvell,armada390";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000>; /* 2 GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+
+		internal-regs {
+			i2c@11000 {
+				status = "okay";
+				clock-frequency = <100000>;
+
+				eeprom@50 {
+					compatible = "atmel,24c64";
+					reg = <0x50>;
+				};
+			};
+
+			/* CON104 */
+			serial@12000 {
+				status = "okay";
+			};
+
+			/* CON97 */
+			usb@58000 {
+				status = "okay";
+			};
+
+			flash@d0000 {
+				status = "okay";
+				pinctrl-0 = <&nand_pins>;
+				pinctrl-names = "default";
+				num-cs = <1>;
+				marvell,nand-keep-config;
+				marvell,nand-enable-arbiter;
+				nand-on-flash-bbt;
+				nand-ecc-strength = <8>;
+				nand-ecc-step-size = <512>;
+
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					partition@0 {
+						label = "U-Boot";
+						reg = <0 0x800000>;
+					};
+					partition@800000 {
+						label = "Linux";
+						reg = <0x800000 0x800000>;
+					};
+					partition@1000000 {
+						label = "Filesystem";
+						reg = <0x1000000 0x3f000000>;
+					};
+				};
+			};
+
+			/* CON98 */
+			usb3@f8000 {
+				status = "okay";
+			};
+		};
+
+		pcie-controller {
+			status = "okay";
+
+			/* CON30 */
+			pcie@1,0 {
+				status = "okay";
+			};
+
+			/* CON44 */
+			pcie@2,0 {
+				status = "okay";
+			};
+
+			/* CON61 */
+			pcie@3,0 {
+				status = "okay";
+			};
+		};
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-0 = <&spi1_pins>;
+	pinctrl-names = "default";
+
+	spi-flash@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "n25q128a13",
+			     "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <108000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0 0x400000>;
+			};
+			partition@400000 {
+				label = "Filesystem";
+				reg = <0x400000 0xc00000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-390.dtsi b/arch/arm/boot/dts/armada-390.dtsi
index 094e39c..6cd18d8 100644
--- a/arch/arm/boot/dts/armada-390.dtsi
+++ b/arch/arm/boot/dts/armada-390.dtsi
@@ -47,6 +47,8 @@
 #include "armada-39x.dtsi"
 
 / {
+	compatible = "marvell,armada390";
+
 	soc {
 		internal-regs {
 			pinctrl@18000 {
@@ -54,4 +56,5 @@
 				reg = <0x18000 0x20>;
 			};
 		};
+	};
 };
diff --git a/arch/arm/boot/dts/armada-395-gp.dts b/arch/arm/boot/dts/armada-395-gp.dts
new file mode 100644
index 0000000..2cdbba8
--- /dev/null
+++ b/arch/arm/boot/dts/armada-395-gp.dts
@@ -0,0 +1,163 @@
+/*
+ * Device Tree file for Marvell Armada 395 GP board
+ *
+ * Copyright (C) 2016 Marvell
+ *
+ * Grzegorz Jaszczyk <jaz@semihalf.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is licensed under the terms of the GNU General Public
+ *     License version 2.  This program is licensed "as is" without
+ *     any warranty of any kind, whether express or implied.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "armada-395.dtsi"
+
+/ {
+	model = "Marvell Armada 395 GP Board";
+	compatible = "marvell,a395-gp", "marvell,armada395",
+		     "marvell,armada390";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>; /* 1 GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+
+		internal-regs {
+			i2c@11000 {
+				status = "okay";
+				clock-frequency = <100000>;
+
+				eeprom@57 {
+					compatible = "atmel,24c64";
+					reg = <0x57>;
+				};
+			};
+
+			serial@12000 {
+				/*
+				 * Exported on the micro USB connector CON17
+				 * through an FTDI
+				 */
+				status = "okay";
+			};
+
+			/* CON1 */
+			usb@58000 {
+				status = "okay";
+			};
+
+			/* CON2 */
+			sata@a8000 {
+				status = "okay";
+			};
+
+			flash@d0000 {
+				status = "okay";
+				pinctrl-0 = <&nand_pins>;
+				pinctrl-names = "default";
+				num-cs = <1>;
+				marvell,nand-keep-config;
+				marvell,nand-enable-arbiter;
+				nand-on-flash-bbt;
+				nand-ecc-strength = <4>;
+				nand-ecc-step-size = <512>;
+
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					partition@0 {
+						label = "U-Boot";
+						reg = <0x00000000 0x00600000>;
+						read-only;
+					};
+
+					partition@800000 {
+						label = "uImage";
+						reg = <0x00600000 0x00400000>;
+						read-only;
+					};
+
+					partition@1000000 {
+						label = "Root";
+						reg = <0x00a00000 0x3f600000>;
+					};
+				};
+			};
+
+			/* CON18 */
+			sdhci@d8000 {
+				clock-frequency = <200000000>;
+				broken-cd;
+				wp-inverted;
+				bus-width = <8>;
+				status = "okay";
+				no-1-8-v;
+			};
+
+			/* CON4 */
+			usb3@f0000 {
+				status = "okay";
+			};
+		};
+
+		pcie-controller {
+			status = "okay";
+
+			/*
+			 * The two PCIe units are accessible through
+			 * mini PCIe slot on the board.
+			 */
+
+			/* CON7 */
+			pcie@2,0 {
+				/* Port 1, Lane 0 */
+				status = "okay";
+			};
+
+			/* CON8 */
+			pcie@4,0 {
+				/* Port 3, Lane 0 */
+				status = "okay";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/uniphier-ph1-ld6b.dtsi b/arch/arm/boot/dts/armada-395.dtsi
similarity index 68%
copy from arch/arm/boot/dts/uniphier-ph1-ld6b.dtsi
copy to arch/arm/boot/dts/armada-395.dtsi
index 19c107c..ab5dc49 100644
--- a/arch/arm/boot/dts/uniphier-ph1-ld6b.dtsi
+++ b/arch/arm/boot/dts/armada-395.dtsi
@@ -1,7 +1,9 @@
 /*
- * Device Tree Source for UniPhier PH1-LD6b SoC
+ * Device Tree Include file for Marvell Armada 395 SoC.
  *
- * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2016 Marvell
+ *
+ * Grzegorz Jaszczyk <jaz@semihalf.com>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -13,17 +15,17 @@
  *     published by the Free Software Foundation; either version 2 of the
  *     License, or (at your option) any later version.
  *
- *     This file is distributed in the hope that it will be useful,
+ *     This file is distributed in the hope that it will be useful
  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- * Or, alternatively,
+ * Or, alternatively
  *
  *  b) Permission is hereby granted, free of charge, to any person
  *     obtaining a copy of this software and associated documentation
  *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
+ *     restriction, including without limitation the rights to use
  *     copy, modify, merge, publish, distribute, sublicense, and/or
  *     sell copies of the Software, and to permit persons to whom the
  *     Software is furnished to do so, subject to the following
@@ -32,36 +34,43 @@
  *     The above copyright notice and this permission notice shall be
  *     included in all copies or substantial portions of the Software.
  *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-/*
- * PH1-LD6b consists of two silicon dies: D-chip and A-chip.
- * The D-chip (digital chip) is the same as the ProXstream2 die.
- * Reuse the ProXstream2 device tree with some properties overridden.
- */
-/include/ "uniphier-proxstream2.dtsi"
+#include "armada-39x.dtsi"
 
 / {
-	compatible = "socionext,ph1-ld6b";
-};
+	compatible = "marvell,armada395", "marvell,armada390";
 
-/* UART3 unavailable: the pads are not wired to the package balls */
-&serial3 {
-	status = "disabled";
-};
+	soc {
+		internal-regs {
+			pinctrl@18000 {
+				compatible = "marvell,mv88f6925-pinctrl";
+				reg = <0x18000 0x20>;
+			};
 
-/*
- * PH1-LD6b and ProXstream2 have completely different packages,
- * which makes the pinctrl driver unshareable.
- */
-&pinctrl {
-	compatible = "socionext,uniphier-ld6b-pinctrl";
+			sata@a8000 {
+				compatible = "marvell,armada-380-ahci";
+				reg = <0xa8000 0x2000>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 15>;
+				status = "disabled";
+			};
+
+			usb3@f0000 {
+				compatible = "marvell,armada-380-xhci";
+				reg = <0xf0000 0x4000>,<0xf4000 0x4000>;
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 9>;
+				status = "disabled";
+			};
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/armada-398-db.dts b/arch/arm/boot/dts/armada-398-db.dts
index 788c3ba..268c834 100644
--- a/arch/arm/boot/dts/armada-398-db.dts
+++ b/arch/arm/boot/dts/armada-398-db.dts
@@ -65,30 +65,6 @@
 			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
 
 		internal-regs {
-			spi@10680 {
-				status = "okay";
-				pinctrl-0 = <&spi1_pins>;
-				pinctrl-names = "default";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					compatible = "n25q128a13", "jedec,spi-nor";
-					reg = <0>;
-					spi-max-frequency = <108000000>;
-
-					partition@0 {
-						label = "U-Boot";
-						reg = <0 0x400000>;
-					};
-
-					partition@400000 {
-						label = "Filesystem";
-						reg = <0x400000 0x1000000>;
-					};
-				};
-			};
-
 			i2c@11000 {
 				pinctrl-0 = <&i2c0_pins>;
 				pinctrl-names = "default";
@@ -108,6 +84,10 @@
 				status = "okay";
 			};
 
+			usb@58000 {
+				status = "okay";
+			};
+
 			flash@d0000 {
 				status = "okay";
 				pinctrl-0 = <&nand_pins>;
@@ -132,6 +112,10 @@
 					reg = <0x1000000 0x3f000000>;
 				};
 			};
+
+			usb3@f8000 {
+				status = "okay";
+			};
 		};
 
 		pcie-controller {
@@ -151,3 +135,27 @@
 		};
 	};
 };
+
+&spi1 {
+	status = "okay";
+	pinctrl-0 = <&spi1_pins>;
+	pinctrl-names = "default";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "n25q128a13", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <108000000>;
+
+		partition@0 {
+			label = "U-Boot";
+			reg = <0 0x400000>;
+		};
+
+		partition@400000 {
+			label = "Filesystem";
+			reg = <0x400000 0x1000000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-398.dtsi b/arch/arm/boot/dts/armada-398.dtsi
index fdc2591..234a998 100644
--- a/arch/arm/boot/dts/armada-398.dtsi
+++ b/arch/arm/boot/dts/armada-398.dtsi
@@ -44,7 +44,7 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-#include "armada-39x.dtsi"
+#include "armada-395.dtsi"
 
 / {
 	compatible = "marvell,armada398", "marvell,armada390";
@@ -55,6 +55,14 @@
 				compatible = "marvell,mv88f6928-pinctrl";
 				reg = <0x18000 0x20>;
 			};
+
+			sata@e0000 {
+				compatible = "marvell,armada-380-ahci";
+				reg = <0xe0000 0x2000>;
+				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 30>;
+				status = "disabled";
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/armada-39x.dtsi b/arch/arm/boot/dts/armada-39x.dtsi
index dc6efd3..34cba87 100644
--- a/arch/arm/boot/dts/armada-39x.dtsi
+++ b/arch/arm/boot/dts/armada-39x.dtsi
@@ -55,6 +55,8 @@
 	compatible = "marvell,armada390";
 
 	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
 		serial0 = &uart0;
 		serial1 = &uart1;
 		serial2 = &uart2;
@@ -78,6 +80,11 @@
 		};
 	};
 
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts-extended = <&mpic 3>;
+	};
+
 	soc {
 		compatible = "marvell,armada390-mbus", "marvell,armadaxp-mbus",
 			     "simple-bus";
@@ -131,30 +138,6 @@
 				      <0xc100 0x100>;
 			};
 
-			spi0: spi@10600 {
-				compatible = "marvell,armada-390-spi",
-						"marvell,orion-spi";
-				reg = <0x10600 0x50>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <0>;
-				interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			spi1: spi@10680 {
-				compatible = "marvell,armada-390-spi",
-						"marvell,orion-spi";
-				reg = <0x10680 0x50>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <1>;
-				interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
 			i2c0: i2c@11000 {
 				compatible = "marvell,mv64xxx-i2c";
 				reg = <0x11000 0x20>;
@@ -269,6 +252,34 @@
 				};
 			};
 
+			gpio0: gpio@18100 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18100 0x40>;
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			gpio1: gpio@18140 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18140 0x40>;
+				ngpios = <28>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
 			system-controller@18200 {
 				compatible = "marvell,armada-390-system-controller",
 					     "marvell,armada-370-xp-system-controller";
@@ -317,11 +328,29 @@
 				clock-names = "nbclk", "fixed";
 			};
 
+			watchdog@20300 {
+				compatible = "marvell,armada-380-wdt";
+				reg = <0x20300 0x34>, <0x20704 0x4>,
+				      <0x18260 0x4>;
+				clocks = <&coreclk 2>, <&refclk>;
+				clock-names = "nbclk", "fixed";
+			};
+
 			cpurst@20800 {
 				compatible = "marvell,armada-370-cpu-reset";
 				reg = <0x20800 0x10>;
 			};
 
+			mpcore-soc-ctrl@20d20 {
+				compatible = "marvell,armada-380-mpcore-soc-ctrl";
+				reg = <0x20d20 0x6c>;
+			};
+
+			coherency-fabric@21010 {
+				compatible = "marvell,armada-380-coherency-fabric";
+				reg = <0x21010 0x1c>;
+			};
+
 			pmsu@22000 {
 				compatible = "marvell,armada-390-pmsu",
 					     "marvell,armada-380-pmsu";
@@ -368,6 +397,13 @@
 				};
 			};
 
+			rtc@a3800 {
+				compatible = "marvell,armada-380-rtc";
+				reg = <0xa3800 0x20>, <0x184a0 0x0c>;
+				reg-names = "rtc", "rtc-soc";
+				interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
 			flash@d0000 {
 				compatible = "marvell,armada370-nand";
 				reg = <0xd0000 0x54>;
@@ -380,7 +416,10 @@
 
 			sdhci@d8000 {
 				compatible = "marvell,armada-380-sdhci";
-				reg = <0xd8000 0x1000>, <0xdc000 0x100>;
+				reg-names = "sdhci", "mbus", "conf-sdio3";
+				reg = <0xd8000 0x1000>,
+					<0xdc000 0x100>,
+					<0x18454 0x4>;
 				interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gateclk 17>;
 				mrvl,clk-delay-cycles = <0x1F>;
@@ -395,6 +434,12 @@
 				clocks = <&mainpll>;
 				clock-output-names = "nand";
 			};
+
+			thermal@e8078 {
+				compatible = "marvell,armada380-thermal";
+				reg = <0xe4078 0x4>, <0xe4074 0x4>;
+				status = "okay";
+			};
 		};
 
 		pcie-controller {
@@ -501,6 +546,30 @@
 				status = "disabled";
 			};
 		};
+
+		spi0: spi@10600 {
+			compatible = "marvell,armada-390-spi",
+					"marvell,orion-spi";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10600 0x50>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		spi1: spi@10680 {
+			compatible = "marvell,armada-390-spi",
+					"marvell,orion-spi";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10680 0x50>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
 	};
 
 	clocks {
@@ -510,5 +579,12 @@
 			#clock-cells = <0>;
 			clock-frequency = <1000000000>;
 		};
+
+		/* 25 MHz reference crystal */
+		refclk: oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
index 5c21b23..ce15271 100644
--- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts
+++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
@@ -135,18 +135,6 @@
 				phy = <&phy1>;
 				phy-mode = "rgmii-id";
 			};
-
-			spi0: spi@10600 {
-				status = "okay";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "n25q128a13", "jedec,spi-nor";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <108000000>;
-				};
-			};
 		};
 	};
 
@@ -179,3 +167,15 @@
 		marvell,function = "gpio";
 	};
 };
+
+&spi0 {
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "n25q128a13", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <108000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts
index 62422a9..075120b 100644
--- a/arch/arm/boot/dts/armada-xp-db.dts
+++ b/arch/arm/boot/dts/armada-xp-db.dts
@@ -231,18 +231,6 @@
 				status = "okay";
 			};
 
-			spi0: spi@10600 {
-				status = "okay";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "m25p64", "jedec,spi-nor";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <20000000>;
-				};
-			};
-
 			nand@d0000 {
 				status = "okay";
 				num-cs = <1>;
@@ -277,3 +265,15 @@
 		};
 	};
 };
+
+&spi0 {
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "m25p64", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <20000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts
index 061f423..190e4ec 100644
--- a/arch/arm/boot/dts/armada-xp-gp.dts
+++ b/arch/arm/boot/dts/armada-xp-gp.dts
@@ -232,18 +232,6 @@
 				status = "okay";
 			};
 
-			spi0: spi@10600 {
-				status = "okay";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "n25q128a13", "jedec,spi-nor";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <108000000>;
-				};
-			};
-
 			bm@c0000 {
 				status = "okay";
 			};
@@ -262,3 +250,15 @@
 		};
 	};
 };
+
+&spi0 {
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "n25q128a13", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <108000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
index 7a46154..076f27f 100644
--- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
@@ -279,18 +279,6 @@
 					reg = <0x180000 0x780000>;   /* 7.5MB */
 				};
 			};
-
-			spi0: spi@10600 {
-				status = "okay";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "everspin,mr25h256";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <40000000>;
-				};
-			};
 		};
 	};
 
@@ -398,3 +386,15 @@
 		marvell,function = "gpio";
 	};
 };
+
+&spi0 {
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "everspin,mr25h256";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <40000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/armada-xp-synology-ds414.dts b/arch/arm/boot/dts/armada-xp-synology-ds414.dts
index d17dab0..ae28673 100644
--- a/arch/arm/boot/dts/armada-xp-synology-ds414.dts
+++ b/arch/arm/boot/dts/armada-xp-synology-ds414.dts
@@ -110,62 +110,6 @@
 				status = "disabled";
 			};
 
-			spi0: spi@10600 {
-				status = "okay";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "micron,n25q064", "jedec,spi-nor";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <20000000>;
-
-					/*
-					 * Warning!
-					 *
-					 * Synology u-boot uses its compiled-in environment
-					 * and it seems Synology did not care to change u-boot
-					 * default configuration in order to allow saving a
-					 * modified environment at a sensible location. So,
-					 * if you do a 'saveenv' under u-boot, your modified
-					 * environment will be saved at 1MB after the start
-					 * of the flash, i.e. in the middle of the uImage.
-					 * For that reason, it is strongly advised not to
-					 * change the default environment, unless you know
-					 * what you are doing.
-					 */
-					partition@00000000 { /* u-boot */
-						label = "RedBoot";
-						reg = <0x00000000 0x000d0000>; /* 832KB */
-					};
-
-					partition@000c0000 { /* uImage */
-						label = "zImage";
-						reg = <0x000d0000 0x002d0000>; /* 2880KB */
-					};
-
-					partition@003a0000 { /* uInitramfs */
-						label = "rd.gz";
-						reg = <0x003a0000 0x00430000>; /* 4250KB */
-					};
-
-					partition@007d0000 { /* MAC address and serial number */
-						label = "vendor";
-						reg = <0x007d0000 0x00010000>; /* 64KB */
-					};
-
-					partition@007e0000 {
-						label = "RedBoot config";
-						reg = <0x007e0000 0x00010000>; /* 64KB */
-					};
-
-					partition@007f0000 {
-						label = "FIS directory";
-						reg = <0x007f0000 0x00010000>; /* 64KB */
-					};
-				};
-			};
-
 			i2c@11000 {
 				clock-frequency = <400000>;
 				status = "okay";
@@ -362,3 +306,59 @@
 		marvell,function = "gpio";
 	};
 };
+
+&spi0 {
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,n25q064", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <20000000>;
+
+		/*
+		 * Warning!
+		 *
+		 * Synology u-boot uses its compiled-in environment
+		 * and it seems Synology did not care to change u-boot
+		 * default configuration in order to allow saving a
+		 * modified environment at a sensible location. So,
+		 * if you do a 'saveenv' under u-boot, your modified
+		 * environment will be saved at 1MB after the start
+		 * of the flash, i.e. in the middle of the uImage.
+		 * For that reason, it is strongly advised not to
+		 * change the default environment, unless you know
+		 * what you are doing.
+		 */
+		partition@00000000 { /* u-boot */
+			label = "RedBoot";
+			reg = <0x00000000 0x000d0000>; /* 832KB */
+		};
+
+		partition@000c0000 { /* uImage */
+			label = "zImage";
+			reg = <0x000d0000 0x002d0000>; /* 2880KB */
+		};
+
+		partition@003a0000 { /* uInitramfs */
+			label = "rd.gz";
+			reg = <0x003a0000 0x00430000>; /* 4250KB */
+		};
+
+		partition@007d0000 { /* MAC address and serial number */
+			label = "vendor";
+			reg = <0x007d0000 0x00010000>; /* 64KB */
+		};
+
+		partition@007e0000 {
+			label = "RedBoot config";
+			reg = <0x007e0000 0x00010000>; /* 64KB */
+		};
+
+		partition@007f0000 {
+			label = "FIS directory";
+			reg = <0x007f0000 0x00010000>; /* 64KB */
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi
index 553349c..4a5f99e 100644
--- a/arch/arm/boot/dts/armada-xp.dtsi
+++ b/arch/arm/boot/dts/armada-xp.dtsi
@@ -84,19 +84,6 @@
 				wt-override;
 			};
 
-			spi0: spi@10600 {
-				compatible = "marvell,armada-xp-spi",
-						"marvell,orion-spi";
-				pinctrl-0 = <&spi0_pins>;
-				pinctrl-names = "default";
-			};
-
-			spi1: spi@10680 {
-				compatible = "marvell,armada-xp-spi",
-						"marvell,orion-spi";
-			};
-
-
 			i2c0: i2c@11000 {
 				compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
 				reg = <0x11000 0x100>;
@@ -362,6 +349,12 @@
 		marvell,function = "spi0";
 	};
 
+	spi1_pins: spi1-pins {
+		marvell,pins = "mpp13", "mpp14",
+			       "mpp16", "mpp17";
+		marvell,function = "spi1";
+	};
+
 	uart2_pins: uart2-pins {
 		marvell,pins = "mpp42", "mpp43";
 		marvell,function = "uart2";
@@ -372,3 +365,15 @@
 		marvell,function = "uart3";
 	};
 };
+
+&spi0 {
+	compatible = "marvell,armada-xp-spi", "marvell,orion-spi";
+	pinctrl-0 = <&spi0_pins>;
+	pinctrl-names = "default";
+};
+
+&spi1 {
+	compatible = "marvell,armada-xp-spi", "marvell,orion-spi";
+	pinctrl-0 = <&spi1_pins>;
+	pinctrl-names = "default";
+};
diff --git a/arch/arm/boot/dts/armv7-m.dtsi b/arch/arm/boot/dts/armv7-m.dtsi
index 16331aa..ba332e3 100644
--- a/arch/arm/boot/dts/armv7-m.dtsi
+++ b/arch/arm/boot/dts/armv7-m.dtsi
@@ -1,5 +1,3 @@
-#include "skeleton.dtsi"
-
 / {
 	nvic: interrupt-controller@e000e100  {
 		compatible = "arm,armv7m-nvic";
diff --git a/arch/arm/boot/dts/artpec6.dtsi b/arch/arm/boot/dts/artpec6.dtsi
index 3fac4c4..3489019c 100644
--- a/arch/arm/boot/dts/artpec6.dtsi
+++ b/arch/arm/boot/dts/artpec6.dtsi
@@ -41,6 +41,7 @@
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/axis,artpec6-clkctrl.h>
 #include "skeleton.dtsi"
 
 / {
@@ -109,14 +110,14 @@
 		compatible = "arm,cortex-a9-global-timer";
 		reg = <0xfaf00200 0x20>;
 		interrupts = <GIC_PPI 11 0xf01>;
-		clocks = <&clkctrl 1>;
+		clocks = <&clkctrl ARTPEC6_CLK_CPU_PERIPH>;
 	};
 
 	timer@faf00600 {
 		compatible = "arm,cortex-a9-twd-timer";
 		reg = <0xfaf00600 0x20>;
 		interrupts = <GIC_PPI 13 0xf04>;
-		clocks = <&clkctrl 1>;
+		clocks = <&clkctrl ARTPEC6_CLK_CPU_PERIPH>;
 		status = "disabled";
 	};
 
@@ -136,12 +137,20 @@
 		arm,data-latency = <1 1 1>;
 		arm,tag-latency = <1 1 1>;
 		arm,filter-ranges = <0x0 0x80000000>;
+		arm,double-linefill = <1>;
+		arm,double-linefill-incr = <0>;
+		arm,double-linefill-wrap = <0>;
+		prefetch-data = <1>;
+		prefetch-instr = <1>;
+		arm,prefetch-offset = <0>;
+		arm,prefetch-drop = <1>;
 	};
 
 	pmu {
 		compatible = "arm,cortex-a9-pmu";
 		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
 			<GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
 		interrupt-parent = <&intc>;
 	};
 
@@ -157,7 +166,7 @@
 		ethernet: ethernet@f8010000 {
 			clock-names = "phy_ref_clk", "apb_pclk";
 			clocks = <&eth_phy_ref_clk>,
-				<&clkctrl 4>;
+				<&clkctrl ARTPEC6_CLK_ETH_ACLK>;
 			compatible = "snps,dwc-qos-ethernet-4.10";
 			interrupt-parent = <&intc>;
 			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
@@ -175,8 +184,8 @@
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0xf8036000 0x1000>;
 			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clkctrl 13>,
-				<&clkctrl 12>;
+			clocks = <&clkctrl ARTPEC6_CLK_UART_REFCLK>,
+				<&clkctrl ARTPEC6_CLK_UART_PCLK>;
 			clock-names = "uart_clk", "apb_pclk";
 			status = "disabled";
 		};
@@ -184,8 +193,8 @@
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0xf8037000 0x1000>;
 			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clkctrl 13>,
-				<&clkctrl 12>;
+			clocks = <&clkctrl ARTPEC6_CLK_UART_REFCLK>,
+				<&clkctrl ARTPEC6_CLK_UART_PCLK>;
 			clock-names = "uart_clk", "apb_pclk";
 			status = "disabled";
 		};
@@ -193,8 +202,8 @@
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0xf8038000 0x1000>;
 			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clkctrl 13>,
-				<&clkctrl 12>;
+			clocks = <&clkctrl ARTPEC6_CLK_UART_REFCLK>,
+				<&clkctrl ARTPEC6_CLK_UART_PCLK>;
 			clock-names = "uart_clk", "apb_pclk";
 			status = "disabled";
 		};
@@ -202,8 +211,8 @@
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0xf8039000 0x1000>;
 			interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clkctrl 13>,
-				<&clkctrl 12>;
+			clocks = <&clkctrl ARTPEC6_CLK_UART_REFCLK>,
+				<&clkctrl ARTPEC6_CLK_UART_PCLK>;
 			clock-names = "uart_clk", "apb_pclk";
 			status = "disabled";
 		};
diff --git a/arch/arm/boot/dts/axp209.dtsi b/arch/arm/boot/dts/axp209.dtsi
index afbe89c..675bb0f 100644
--- a/arch/arm/boot/dts/axp209.dtsi
+++ b/arch/arm/boot/dts/axp209.dtsi
@@ -53,6 +53,12 @@
 	interrupt-controller;
 	#interrupt-cells = <1>;
 
+	axp_gpio: gpio {
+		compatible = "x-powers,axp209-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
 	regulators {
 		/* Default work frequency for buck regulators */
 		x-powers,dcdc-freq = <1500>;
diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi
index c3bf7d2..7c9e0fa 100644
--- a/arch/arm/boot/dts/bcm-nsp.dtsi
+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
@@ -209,6 +209,24 @@
 			#dma-cells = <1>;
 		};
 
+		amac0: ethernet@22000 {
+			compatible = "brcm,nsp-amac";
+			reg = <0x022000 0x1000>,
+			      <0x110000 0x1000>;
+			reg-names = "amac_base", "idm_base";
+			interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		amac1: ethernet@23000 {
+			compatible = "brcm,nsp-amac";
+			reg = <0x023000 0x1000>,
+			      <0x111000 0x1000>;
+			reg-names = "amac_base", "idm_base";
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
 		nand: nand@26000 {
 			compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
 			reg = <0x026000 0x600>,
@@ -223,6 +241,14 @@
 			brcm,nand-has-wp;
 		};
 
+		pwm: pwm@31000 {
+			compatible = "brcm,iproc-pwm";
+			reg = <0x31000 0x28>;
+			clocks = <&osc>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
 		rng: rng@33000 {
 			compatible = "brcm,bcm-nsp-rng";
 			reg = <0x33000 0x14>;
@@ -246,6 +272,17 @@
 			clock-names = "apb_pclk";
 		};
 
+		srab: srab@36000 {
+			compatible = "brcm,nsp-srab";
+			reg = <0x36000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+
+			/* ports are defined in board DTS */
+		};
+
 		i2c0: i2c@38000 {
 			compatible = "brcm,iproc-i2c";
 			reg = <0x38000 0x50>;
diff --git a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
index 35ff4e7a..f7f9db3 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
@@ -1,6 +1,7 @@
 /dts-v1/;
 #include "bcm2835.dtsi"
 #include "bcm2835-rpi.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
 
 / {
 	compatible = "raspberrypi,model-a-plus", "brcm,bcm2835";
diff --git a/arch/arm/boot/dts/bcm2835-rpi-a.dts b/arch/arm/boot/dts/bcm2835-rpi-a.dts
index 306a84e..8be102f 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-a.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-a.dts
@@ -1,6 +1,7 @@
 /dts-v1/;
 #include "bcm2835.dtsi"
 #include "bcm2835-rpi.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
 
 / {
 	compatible = "raspberrypi,model-a", "brcm,bcm2835";
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
index d5fdb8e..35cde65 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
@@ -2,6 +2,7 @@
 #include "bcm2835.dtsi"
 #include "bcm2835-rpi.dtsi"
 #include "bcm283x-rpi-smsc9514.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
 
 / {
 	compatible = "raspberrypi,model-b-plus", "brcm,bcm2835";
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
index bfc4bd9..84df85e 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
@@ -2,6 +2,7 @@
 #include "bcm2835.dtsi"
 #include "bcm2835-rpi.dtsi"
 #include "bcm283x-rpi-smsc9512.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
 
 / {
 	compatible = "raspberrypi,model-b-rev2", "brcm,bcm2835";
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts
index 0371bb7..8e626a8 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts
@@ -2,6 +2,7 @@
 #include "bcm2835.dtsi"
 #include "bcm2835-rpi.dtsi"
 #include "bcm283x-rpi-smsc9512.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
 
 / {
 	compatible = "raspberrypi,model-b", "brcm,bcm2835";
diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero.dts b/arch/arm/boot/dts/bcm2835-rpi-zero.dts
new file mode 100644
index 0000000..60e359f
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2835-rpi-zero.dts
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2016 Stefan Wahren <stefan.wahren@i2se.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "bcm2835.dtsi"
+#include "bcm2835-rpi.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+
+/ {
+	compatible = "raspberrypi,model-zero", "brcm,bcm2835";
+	model = "Raspberry Pi Zero";
+
+	leds {
+		act {
+			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&gpio {
+	pinctrl-0 = <&gpioout &alt0 &i2s_alt0 &alt3>;
+
+	/* I2S interface */
+	i2s_alt0: i2s_alt0 {
+		brcm,pins = <18 19 20 21>;
+		brcm,function = <BCM2835_FSEL_ALT0>;
+	};
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
index 29e1cfe..39dccf62 100644
--- a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
+++ b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
@@ -2,6 +2,7 @@
 #include "bcm2836.dtsi"
 #include "bcm2835-rpi.dtsi"
 #include "bcm283x-rpi-smsc9514.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
 
 / {
 	compatible = "raspberrypi,2-model-b", "brcm,bcm2836";
diff --git a/arch/arm/boot/dts/bcm283x-rpi-usb-host.dtsi b/arch/arm/boot/dts/bcm283x-rpi-usb-host.dtsi
new file mode 100644
index 0000000..73f4ece
--- /dev/null
+++ b/arch/arm/boot/dts/bcm283x-rpi-usb-host.dtsi
@@ -0,0 +1,3 @@
+&usb {
+	dr_mode = "host";
+};
diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi
index 445624a..46d46d8 100644
--- a/arch/arm/boot/dts/bcm283x.dtsi
+++ b/arch/arm/boot/dts/bcm283x.dtsi
@@ -290,6 +290,8 @@
 			interrupts = <1 9>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			clocks = <&clk_usb>;
+			clock-names = "otg";
 		};
 
 		v3d: v3d@7ec00000 {
@@ -317,5 +319,12 @@
 			clock-frequency = <19200000>;
 		};
 
+		clk_usb: clock@4 {
+			compatible = "fixed-clock";
+			reg = <4>;
+			#clock-cells = <0>;
+			clock-output-names = "otg";
+			clock-frequency = <480000000>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
index 8af4791..ae4b388 100644
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -140,6 +140,15 @@
 		};
 	};
 
+	usb2_phy: usb2-phy {
+		compatible = "brcm,ns-usb2-phy";
+		reg = <0x1800c000 0x1000>;
+		reg-names = "dmu";
+		#phy-cells = <0>;
+		clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>;
+		clock-names = "phy-ref-clk";
+	};
+
 	axi@18000000 {
 		compatible = "brcm,bus-axi";
 		reg = <0x18000000 0x1000>;
@@ -232,6 +241,8 @@
 
 			#address-cells = <1>;
 			#size-cells = <1>;
+
+			phys = <&usb2_phy>;
 		};
 
 		usb3: usb3@23000 {
diff --git a/arch/arm/boot/dts/bcm958522er.dts b/arch/arm/boot/dts/bcm958522er.dts
new file mode 100644
index 0000000..a21b0fd
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958522er.dts
@@ -0,0 +1,130 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2016 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm-nsp.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "NorthStar Plus SVK (BCM958522ER)";
+	compatible = "brcm,bcm58522", "brcm,nsp";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
+		priority = <200>;
+	};
+};
+
+/* USB 2/3 support needed to be complete */
+
+&amac0 {
+	status = "okay";
+};
+
+
+&amac1 {
+	status = "okay";
+};
+
+&nand {
+	nandcs@0 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-on-flash-bbt;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <1024>;
+
+		brcm,nand-oob-sector-size = <27>;
+
+		partition@0 {
+			label = "nboot";
+			reg = <0x00000000 0x00200000>;
+			read-only;
+		};
+		partition@200000 {
+			label = "nenv";
+			reg = <0x00200000 0x00400000>;
+		};
+		partition@600000 {
+			label = "nsystem";
+			reg = <0x00600000 0x00a00000>;
+		};
+		partition@1000000 {
+			label = "nrootfs";
+			reg = <0x01000000 0x03000000>;
+		};
+		partition@4000000 {
+			label = "ncustfs";
+			reg = <0x04000000 0x3c000000>;
+		};
+	};
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_sel>;
+	nand_sel: nand_sel {
+		function = "nand";
+		groups = "nand_grp";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm958525er.dts b/arch/arm/boot/dts/bcm958525er.dts
new file mode 100644
index 0000000..be7f2f8
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958525er.dts
@@ -0,0 +1,142 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2016 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm-nsp.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "NorthStar Plus SVK (BCM958525ER)";
+	compatible = "brcm,bcm58525", "brcm,nsp";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
+		priority = <200>;
+	};
+};
+
+/* USB 2/3 support needed to be complete */
+
+&amac0 {
+	status = "okay";
+};
+
+
+&amac1 {
+	status = "okay";
+};
+
+&nand {
+	nandcs@0 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-on-flash-bbt;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <1024>;
+
+		brcm,nand-oob-sector-size = <27>;
+
+		partition@0 {
+			label = "nboot";
+			reg = <0x00000000 0x00200000>;
+			read-only;
+		};
+		partition@200000 {
+			label = "nenv";
+			reg = <0x00200000 0x00400000>;
+		};
+		partition@600000 {
+			label = "nsystem";
+			reg = <0x00600000 0x00a00000>;
+		};
+		partition@1000000 {
+			label = "nrootfs";
+			reg = <0x01000000 0x03000000>;
+		};
+		partition@4000000 {
+			label = "ncustfs";
+			reg = <0x04000000 0x3c000000>;
+		};
+	};
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_sel>;
+	nand_sel: nand_sel {
+		function = "nand";
+		groups = "nand_grp";
+	};
+};
+
+&sata_phy0 {
+	status = "okay";
+};
+
+&sata_phy1 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm958525xmc.dts b/arch/arm/boot/dts/bcm958525xmc.dts
index d257e83..959cde9 100644
--- a/arch/arm/boot/dts/bcm958525xmc.dts
+++ b/arch/arm/boot/dts/bcm958525xmc.dts
@@ -33,6 +33,7 @@
 /dts-v1/;
 
 #include "bcm-nsp.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "NorthStar Plus XMC (BCM958525xmc)";
@@ -45,6 +46,35 @@
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x60000000 0x40000000>;
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpioa 31 GPIO_ACTIVE_LOW>;
+		priority = <200>;
+	};
+};
+
+&i2c0 {
+	temperature-sensor@4c {
+		compatible = "adi,adt7461a";
+		reg = <0x4c>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	rtc@68 {
+		compatible = "st,m41t81";
+		reg = <0x68>;
+	};
 };
 
 &nand {
@@ -85,7 +115,7 @@
 	};
 };
 
-/* XHCI, SATA, MMC, and Ethernet support needed to be complete */
+/* XHCI, MMC, and Ethernet support needed to be complete */
 
 &uart0 {
 	status = "okay";
@@ -99,6 +129,18 @@
 	status = "okay";
 };
 
+&sata_phy0 {
+	status = "okay";
+};
+
+&sata_phy1 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
 &pinctrl {
 	pinctrl-names = "default";
 	pinctrl-0 = <&nand_sel>;
diff --git a/arch/arm/boot/dts/bcm958622hr.dts b/arch/arm/boot/dts/bcm958622hr.dts
new file mode 100644
index 0000000..ad2aa87
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958622hr.dts
@@ -0,0 +1,170 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2016 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm-nsp.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "NorthStar Plus SVK (BCM958622HR)";
+	compatible = "brcm,bcm58622", "brcm,nsp";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
+		priority = <200>;
+	};
+};
+
+/* USB 2/3 and SLIC support needed to be complete */
+
+&amac0 {
+	status = "okay";
+};
+
+&nand {
+	nandcs@0 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-on-flash-bbt;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <1024>;
+
+		brcm,nand-oob-sector-size = <27>;
+
+		partition@0 {
+			label = "nboot";
+			reg = <0x00000000 0x00200000>;
+			read-only;
+		};
+		partition@200000 {
+			label = "nenv";
+			reg = <0x00200000 0x00400000>;
+		};
+		partition@600000 {
+			label = "nsystem";
+			reg = <0x00600000 0x00a00000>;
+		};
+		partition@1000000 {
+			label = "nrootfs";
+			reg = <0x01000000 0x03000000>;
+		};
+		partition@4000000 {
+			label = "ncustfs";
+			reg = <0x04000000 0x3c000000>;
+		};
+	};
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_sel>;
+	nand_sel: nand_sel {
+		function = "nand";
+		groups = "nand_grp";
+	};
+};
+
+&srab {
+	compatible = "brcm,bcm58622-srab", "brcm,nsp-srab";
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			label = "port0";
+			reg = <0>;
+		};
+
+		port@1 {
+			label = "port1";
+			reg = <1>;
+		};
+
+		port@2 {
+			label = "port2";
+			reg = <2>;
+		};
+
+		port@3 {
+			label = "port3";
+			reg = <3>;
+		};
+
+		port@4 {
+			label = "port4";
+			reg = <4>;
+		};
+
+		port@5 {
+			ethernet = <&amac0>;
+			label = "cpu";
+			reg = <5>;
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm958623hr.dts b/arch/arm/boot/dts/bcm958623hr.dts
new file mode 100644
index 0000000..4ceb8fe
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958623hr.dts
@@ -0,0 +1,178 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2016 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm-nsp.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "NorthStar Plus SVK (BCM958623HR)";
+	compatible = "brcm,bcm58623", "brcm,nsp";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
+		priority = <200>;
+	};
+};
+
+/* USB 2/3 and SLIC support needed to be complete */
+
+&amac0 {
+	status = "okay";
+};
+
+&nand {
+	nandcs@0 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-on-flash-bbt;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <1024>;
+
+		brcm,nand-oob-sector-size = <27>;
+
+		partition@0 {
+			label = "nboot";
+			reg = <0x00000000 0x00200000>;
+			read-only;
+		};
+		partition@200000 {
+			label = "nenv";
+			reg = <0x00200000 0x00400000>;
+		};
+		partition@600000 {
+			label = "nsystem";
+			reg = <0x00600000 0x00a00000>;
+		};
+		partition@1000000 {
+			label = "nrootfs";
+			reg = <0x01000000 0x03000000>;
+		};
+		partition@4000000 {
+			label = "ncustfs";
+			reg = <0x04000000 0x3c000000>;
+		};
+	};
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_sel>;
+	nand_sel: nand_sel {
+		function = "nand";
+		groups = "nand_grp";
+	};
+};
+
+&srab {
+	compatible = "brcm,bcm58623-srab", "brcm,nsp-srab";
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			label = "port0";
+			reg = <0>;
+		};
+
+		port@1 {
+			label = "port1";
+			reg = <1>;
+		};
+
+		port@2 {
+			label = "port2";
+			reg = <2>;
+		};
+
+		port@3 {
+			label = "port3";
+			reg = <3>;
+		};
+
+		port@4 {
+			label = "port4";
+			reg = <4>;
+		};
+
+		port@5 {
+			ethernet = <&amac0>;
+			label = "cpu";
+			reg = <5>;
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+	};
+};
+
+&sata_phy0 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm958625hr.dts b/arch/arm/boot/dts/bcm958625hr.dts
index 03b8bbe..4420025 100644
--- a/arch/arm/boot/dts/bcm958625hr.dts
+++ b/arch/arm/boot/dts/bcm958625hr.dts
@@ -33,6 +33,7 @@
 /dts-v1/;
 
 #include "bcm-nsp.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "NorthStar Plus SVK (BCM958625HR)";
@@ -47,7 +48,14 @@
 	};
 
 	memory {
-		reg = <0x60000000 0x20000000>;
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
+		priority = <200>;
 	};
 };
 
@@ -109,3 +117,64 @@
 		groups = "nand_grp";
 	};
 };
+
+&amac0 {
+	status = "okay";
+};
+
+&srab {
+	compatible = "brcm,bcm58625-srab", "brcm,nsp-srab";
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			label = "port0";
+			reg = <0>;
+		};
+
+		port@1 {
+			label = "port1";
+			reg = <1>;
+		};
+
+		port@2 {
+			label = "port2";
+			reg = <2>;
+		};
+
+		port@3 {
+			label = "port3";
+			reg = <3>;
+		};
+
+		port@4 {
+			label = "port4";
+			reg = <4>;
+		};
+
+		port@5 {
+			ethernet = <&amac0>;
+			label = "cpu";
+			reg = <5>;
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+	};
+};
+
+&sata_phy0 {
+	status = "okay";
+};
+
+&sata_phy1 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/bcm958625k.dts
index 2d84226..05c5f98 100644
--- a/arch/arm/boot/dts/bcm958625k.dts
+++ b/arch/arm/boot/dts/bcm958625k.dts
@@ -46,6 +46,11 @@
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
 };
 
 &uart0 {
@@ -56,6 +61,14 @@
 	status = "okay";
 };
 
+&amac0 {
+	status = "okay";
+};
+
+&amac1 {
+	status = "okay";
+};
+
 &pcie0 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/bcm988312hr.dts b/arch/arm/boot/dts/bcm988312hr.dts
new file mode 100644
index 0000000..104afe9
--- /dev/null
+++ b/arch/arm/boot/dts/bcm988312hr.dts
@@ -0,0 +1,182 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2016 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm-nsp.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "NorthStar Plus SVK (BCM988312HR)";
+	compatible = "brcm,bcm88312", "brcm,nsp";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
+		priority = <200>;
+	};
+};
+
+/* USB 2/3 support needed to be complete */
+
+&amac0 {
+	status = "okay";
+};
+
+&nand {
+	nandcs@0 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-on-flash-bbt;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <1024>;
+
+		brcm,nand-oob-sector-size = <27>;
+
+		partition@0 {
+			label = "nboot";
+			reg = <0x00000000 0x00200000>;
+			read-only;
+		};
+		partition@200000 {
+			label = "nenv";
+			reg = <0x00200000 0x00400000>;
+		};
+		partition@600000 {
+			label = "nsystem";
+			reg = <0x00600000 0x00a00000>;
+		};
+		partition@1000000 {
+			label = "nrootfs";
+			reg = <0x01000000 0x03000000>;
+		};
+		partition@4000000 {
+			label = "ncustfs";
+			reg = <0x04000000 0x3c000000>;
+		};
+	};
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_sel>;
+	nand_sel: nand_sel {
+		function = "nand";
+		groups = "nand_grp";
+	};
+};
+
+&sata_phy0 {
+	status = "okay";
+};
+
+&sata_phy1 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&srab {
+	compatible = "brcm,bcm88312-srab", "brcm,nsp-srab";
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			label = "port0";
+			reg = <0>;
+		};
+
+		port@1 {
+			label = "port1";
+			reg = <1>;
+		};
+
+		port@2 {
+			label = "port2";
+			reg = <2>;
+		};
+
+		port@3 {
+			label = "port3";
+			reg = <3>;
+		};
+
+		port@4 {
+			label = "port4";
+			reg = <4>;
+		};
+
+		port@5 {
+			ethernet = <&amac0>;
+			label = "cpu";
+			reg = <5>;
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts b/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts
index 3c0907b..1c47579 100644
--- a/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts
+++ b/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts
@@ -49,7 +49,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x40000000>; /* 1 GB */
 	};
diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi
index ae81009..425c489 100644
--- a/arch/arm/boot/dts/berlin2.dtsi
+++ b/arch/arm/boot/dts/berlin2.dtsi
@@ -39,13 +39,14 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-#include "skeleton.dtsi"
 #include <dt-bindings/clock/berlin2.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 
 / {
 	model = "Marvell Armada 1500 (BG2) SoC";
 	compatible = "marvell,berlin2", "marvell,berlin";
+	#address-cells = <1>;
+	#size-cells = <1>;
 
 	aliases {
 		serial0 = &uart0;
@@ -89,7 +90,7 @@
 		clock-frequency = <25000000>;
 	};
 
-	soc {
+	soc@f7000000 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -447,7 +448,6 @@
 				reg = <0x2000 0x100>;
 				clocks = <&refclk>;
 				interrupts = <1>;
-				status = "disabled";
 			};
 
 			wdt2: watchdog@3000 {
@@ -455,7 +455,6 @@
 				reg = <0x3000 0x100>;
 				clocks = <&refclk>;
 				interrupts = <2>;
-				status = "disabled";
 			};
 
 			sm_gpio1: gpio@5000 {
diff --git a/arch/arm/boot/dts/berlin2cd-google-chromecast.dts b/arch/arm/boot/dts/berlin2cd-google-chromecast.dts
index 8ba8b50..ca24def 100644
--- a/arch/arm/boot/dts/berlin2cd-google-chromecast.dts
+++ b/arch/arm/boot/dts/berlin2cd-google-chromecast.dts
@@ -50,7 +50,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x20000000>; /* 512 MB */
 	};
diff --git a/arch/arm/boot/dts/berlin2cd.dtsi b/arch/arm/boot/dts/berlin2cd.dtsi
index 6d06b61..4fe1574 100644
--- a/arch/arm/boot/dts/berlin2cd.dtsi
+++ b/arch/arm/boot/dts/berlin2cd.dtsi
@@ -39,13 +39,14 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-#include "skeleton.dtsi"
 #include <dt-bindings/clock/berlin2.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 
 / {
 	model = "Marvell Armada 1500-mini (BG2CD) SoC";
 	compatible = "marvell,berlin2cd", "marvell,berlin";
+	#address-cells = <1>;
+	#size-cells = <1>;
 
 	aliases {
 		serial0 = &uart0;
@@ -78,7 +79,7 @@
 		clock-frequency = <25000000>;
 	};
 
-	soc {
+	soc@f7000000 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts
index 33b2875..f485308 100644
--- a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts
+++ b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts
@@ -43,7 +43,7 @@
 	model = "Marvell BG2-Q DMP";
 	compatible = "marvell,berlin2q-dmp", "marvell,berlin2q", "marvell,berlin";
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x80000000>;
 	};
diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi
index 2c34bfb..e548229 100644
--- a/arch/arm/boot/dts/berlin2q.dtsi
+++ b/arch/arm/boot/dts/berlin2q.dtsi
@@ -37,11 +37,11 @@
 #include <dt-bindings/clock/berlin2q.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 
-#include "skeleton.dtsi"
-
 / {
 	model = "Marvell Armada 1500 pro (BG2-Q) SoC";
 	compatible = "marvell,berlin2q", "marvell,berlin";
+	#address-cells = <1>;
+	#size-cells = <1>;
 
 	aliases {
 		serial0 = &uart0;
@@ -99,7 +99,7 @@
 		clock-frequency = <25000000>;
 	};
 
-	soc {
+	soc@f7000000 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -525,7 +525,6 @@
 				reg = <0x2000 0x100>;
 				clocks = <&refclk>;
 				interrupts = <1>;
-				status = "disabled";
 			};
 
 			wdt2: watchdog@3000 {
@@ -533,7 +532,6 @@
 				reg = <0x3000 0x100>;
 				clocks = <&refclk>;
 				interrupts = <2>;
-				status = "disabled";
 			};
 
 			sm_gpio1: gpio@5000 {
diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
index 1a15db8..41de15f 100644
--- a/arch/arm/boot/dts/da850-evm.dts
+++ b/arch/arm/boot/dts/da850-evm.dts
@@ -29,6 +29,20 @@
 					0x04 0x00011000 0x000ff000
 				>;
 			};
+			nand_pins: nand_pins {
+				pinctrl-single,bits = <
+					/* EMA_WAIT[0], EMA_OE, EMA_WE, EMA_CS[4], EMA_CS[3] */
+					0x1c 0x10110110  0xf0ff0ff0
+					/*
+					 * EMA_D[0], EMA_D[1], EMA_D[2],
+					 * EMA_D[3], EMA_D[4], EMA_D[5],
+					 * EMA_D[6], EMA_D[7]
+					 */
+					0x24 0x11111111  0xffffffff
+					/* EMA_A[1], EMA_A[2] */
+					0x30 0x01100000  0x0ff00000
+				>;
+			};
 		};
 		serial0: serial@42000 {
 			status = "okay";
@@ -131,12 +145,7 @@
 			status = "okay";
 		};
 	};
-	nand_cs3@62000000 {
-		status = "okay";
-		pinctrl-names = "default";
-		pinctrl-0 = <&nand_cs3_pins>;
-	};
-	vbat: fixedregulator@0 {
+	vbat: fixedregulator0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vbat";
 		regulator-min-microvolt = <5000000>;
@@ -250,3 +259,33 @@
 &edma1 {
 	ti,edma-reserved-slot-ranges = <32 90>;
 };
+
+&aemif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_pins>;
+	status = "ok";
+	cs3 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		clock-ranges;
+		ranges;
+
+		ti,cs-chipselect = <3>;
+
+		nand@2000000,0 {
+			compatible = "ti,davinci-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0 0x02000000 0x02000000
+			       1 0x00000000 0x00008000>;
+
+			ti,davinci-chipselect = <1>;
+			ti,davinci-mask-ale = <0>;
+			ti,davinci-mask-cle = <0>;
+			ti,davinci-mask-chipsel = <0>;
+			ti,davinci-ecc-mode = "hw";
+			ti,davinci-ecc-bits = <4>;
+			ti,davinci-nand-use-bbt;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts
new file mode 100644
index 0000000..7b8ab21
--- /dev/null
+++ b/arch/arm/boot/dts/da850-lcdk.dts
@@ -0,0 +1,221 @@
+/*
+ * Copyright (c) 2016 BayLibre, Inc.
+ *
+ * Licensed under GPLv2.
+ */
+/dts-v1/;
+#include "da850.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "DA850/AM1808/OMAP-L138 LCDK";
+	compatible = "ti,da850-lcdk", "ti,da850";
+
+	aliases {
+		serial2 = &serial2;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0xc0000000 0x08000000>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "DA850/OMAP-L138 LCDK";
+		simple-audio-card,widgets =
+			"Line", "Line In",
+			"Line", "Line Out";
+		simple-audio-card,routing =
+			"LINE1L", "Line In",
+			"LINE1R", "Line In",
+			"Line Out", "LLOUT",
+			"Line Out", "RLOUT";
+		simple-audio-card,format = "dsp_b";
+		simple-audio-card,bitclock-master = <&link0_codec>;
+		simple-audio-card,frame-master = <&link0_codec>;
+		simple-audio-card,bitclock-inversion;
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcasp0>;
+			system-clock-frequency = <24576000>;
+		};
+
+		link0_codec: simple-audio-card,codec {
+			sound-dai = <&tlv320aic3106>;
+			system-clock-frequency = <24576000>;
+		};
+	};
+};
+
+&pmx_core {
+	status = "okay";
+
+	mcasp0_pins: pinmux_mcasp0_pins {
+		pinctrl-single,bits = <
+			/* AHCLKX AFSX ACLKX */
+			0x00 0x00101010 0x00f0f0f0
+			/* ARX13 ARX14 */
+			0x04 0x00000110 0x00000ff0
+		>;
+	};
+
+	nand_pins: nand_pins {
+		pinctrl-single,bits = <
+			/* EMA_WAIT[0], EMA_OE, EMA_WE, EMA_CS[3] */
+			0x1c 0x10110010  0xf0ff00f0
+			/*
+			 * EMA_D[0], EMA_D[1], EMA_D[2],
+			 * EMA_D[3], EMA_D[4], EMA_D[5],
+			 * EMA_D[6], EMA_D[7]
+			 */
+			0x24 0x11111111  0xffffffff
+			/*
+			 * EMA_D[8],  EMA_D[9],  EMA_D[10],
+			 * EMA_D[11], EMA_D[12], EMA_D[13],
+			 * EMA_D[14], EMA_D[15]
+			 */
+			0x20 0x11111111  0xffffffff
+			/* EMA_A[1], EMA_A[2] */
+			0x30 0x01100000  0x0ff00000
+		>;
+	};
+};
+
+&serial2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&serial2_rxtx_pins>;
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
+
+&rtc0 {
+	status = "okay";
+};
+
+&gpio {
+	status = "okay";
+};
+
+&mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio_pins>;
+	bus_freq = <2200000>;
+	status = "okay";
+};
+
+&eth0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mii_pins>;
+	status = "okay";
+};
+
+&mmc0 {
+	max-frequency = <50000000>;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	cd-gpios = <&gpio 64 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	tlv320aic3106: tlv320aic3106@18 {
+		#sound-dai-cells = <0>;
+		compatible = "ti,tlv320aic3106";
+		reg = <0x18>;
+		status = "okay";
+	};
+};
+
+&mcasp0 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcasp0_pins>;
+	status = "okay";
+
+	op-mode = <0>;   /* DAVINCI_MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	serial-dir = <   /* 0: INACTIVE, 1: TX, 2: RX */
+		0 0 0 0
+		0 0 0 0
+		0 0 0 0
+		0 1 2 0
+	>;
+	tx-num-evt = <32>;
+	rx-num-evt = <32>;
+};
+
+&aemif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_pins>;
+	status = "okay";
+	cs3 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		clock-ranges;
+		ranges;
+
+		ti,cs-chipselect = <3>;
+
+		nand@2000000,0 {
+			compatible = "ti,davinci-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0 0x02000000 0x02000000
+			       1 0x00000000 0x00008000>;
+
+			ti,davinci-chipselect = <1>;
+			ti,davinci-mask-ale = <0>;
+			ti,davinci-mask-cle = <0>;
+			ti,davinci-mask-chipsel = <0>;
+
+			ti,davinci-nand-buswidth = <16>;
+			ti,davinci-ecc-mode = "hw";
+			ti,davinci-ecc-bits = <4>;
+			ti,davinci-nand-use-bbt;
+
+			/*
+			 * The OMAP-L132/L138 Bootloader doc SPRAB41E reads:
+			 * "To boot from NAND Flash, the AIS should be written
+			 * to NAND block 1 (NAND block 0 is not used by default)".
+			 * The same doc mentions that for ROM "Silicon Revision 2.1",
+			 * "Updated NAND boot mode to offer boot from block 0 or block 1".
+			 * However the limitaion is left here by default for compatibility
+			 * with older silicon and because it needs new boot pin settings
+			 * not possible in stock LCDK.
+			 */
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					label = "u-boot env";
+					reg = <0 0x020000>;
+				};
+				partition@0x020000 {
+					/* The LCDK defaults to booting from this partition */
+					label = "u-boot";
+					reg = <0x020000 0x080000>;
+				};
+				partition@0x0a0000 {
+					label = "free space";
+					reg = <0x0a0000 0>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index 25f0f8e..f79e1b9 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -41,20 +41,40 @@
 			pinctrl-single,function-mask = <0xf>;
 			status = "disabled";
 
-			nand_cs3_pins: pinmux_nand_pins {
+			serial0_rtscts_pins: pinmux_serial0_rtscts_pins {
 				pinctrl-single,bits = <
-					/* EMA_OE, EMA_WE */
-					0x1c 0x00110000  0x00ff0000
-					/* EMA_CS[4],EMA_CS[3]*/
-					0x1c 0x00000110  0x00000ff0
-					/*
-					 * EMA_D[0], EMA_D[1], EMA_D[2],
-					 * EMA_D[3], EMA_D[4], EMA_D[5],
-					 * EMA_D[6], EMA_D[7]
-					 */
-					0x24 0x11111111  0xffffffff
-					/* EMA_A[1], EMA_A[2] */
-					0x30 0x01100000  0x0ff00000
+					/* UART0_RTS UART0_CTS */
+					0x0c 0x22000000 0xff000000
+				>;
+			};
+			serial0_rxtx_pins: pinmux_serial0_rxtx_pins {
+				pinctrl-single,bits = <
+					/* UART0_TXD UART0_RXD */
+					0x0c 0x00220000 0x00ff0000
+				>;
+			};
+			serial1_rtscts_pins: pinmux_serial1_rtscts_pins {
+				pinctrl-single,bits = <
+					/* UART1_CTS UART1_RTS */
+					0x00 0x00440000 0x00ff0000
+				>;
+			};
+			serial1_rxtx_pins: pinmux_serial1_rxtx_pins {
+				pinctrl-single,bits = <
+					/* UART1_TXD UART1_RXD */
+					0x10 0x22000000 0xff000000
+				>;
+			};
+			serial2_rtscts_pins: pinmux_serial2_rtscts_pins {
+				pinctrl-single,bits = <
+					/* UART2_CTS UART2_RTS */
+					0x00 0x44000000 0xff000000
+				>;
+			};
+			serial2_rxtx_pins: pinmux_serial2_rxtx_pins {
+				pinctrl-single,bits = <
+					/* UART2_TXD UART2_RXD */
+					0x10 0x00220000 0x00ff0000
 				>;
 			};
 			i2c0_pins: pinmux_i2c0_pins {
@@ -274,31 +294,36 @@
 			status = "disabled";
 		};
 		ehrpwm0: pwm@300000 {
-			compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm";
+			compatible = "ti,da850-ehrpwm", "ti,am3352-ehrpwm",
+				     "ti,am33xx-ehrpwm";
 			#pwm-cells = <3>;
 			reg = <0x300000 0x2000>;
 			status = "disabled";
 		};
 		ehrpwm1: pwm@302000 {
-			compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm";
+			compatible = "ti,da850-ehrpwm", "ti,am3352-ehrpwm",
+				     "ti,am33xx-ehrpwm";
 			#pwm-cells = <3>;
 			reg = <0x302000 0x2000>;
 			status = "disabled";
 		};
 		ecap0: ecap@306000 {
-			compatible = "ti,da850-ecap", "ti,am33xx-ecap";
+			compatible = "ti,da850-ecap", "ti,am3352-ecap",
+				     "ti,am33xx-ecap";
 			#pwm-cells = <3>;
 			reg = <0x306000 0x80>;
 			status = "disabled";
 		};
 		ecap1: ecap@307000 {
-			compatible = "ti,da850-ecap", "ti,am33xx-ecap";
+			compatible = "ti,da850-ecap", "ti,am3352-ecap",
+				     "ti,am33xx-ecap";
 			#pwm-cells = <3>;
 			reg = <0x307000 0x80>;
 			status = "disabled";
 		};
 		ecap2: ecap@308000 {
-			compatible = "ti,da850-ecap", "ti,am33xx-ecap";
+			compatible = "ti,da850-ecap", "ti,am3352-ecap",
+				     "ti,am33xx-ecap";
 			#pwm-cells = <3>;
 			reg = <0x308000 0x80>;
 			status = "disabled";
@@ -375,17 +400,14 @@
 			dma-names = "tx", "rx";
 		};
 	};
-	nand_cs3@62000000 {
-		compatible = "ti,davinci-nand";
-		reg = <0x62000000 0x807ff
-		       0x68000000 0x8000>;
-		ti,davinci-chipselect = <1>;
-		ti,davinci-mask-ale = <0>;
-		ti,davinci-mask-cle = <0>;
-		ti,davinci-mask-chipsel = <0>;
-		ti,davinci-ecc-mode = "hw";
-		ti,davinci-ecc-bits = <4>;
-		ti,davinci-nand-use-bbt;
+	aemif: aemif@68000000 {
+		compatible = "ti,da850-aemif";
+		#address-cells = <2>;
+		#size-cells = <1>;
+
+		reg = <0x68000000 0x00008000>;
+		ranges = <0 0 0x60000000 0x08000000
+			  1 0 0x68000000 0x00008000>;
 		status = "disabled";
 	};
 };
diff --git a/arch/arm/boot/dts/dm8148-evm.dts b/arch/arm/boot/dts/dm8148-evm.dts
index 4128fa9..d6657b3 100644
--- a/arch/arm/boot/dts/dm8148-evm.dts
+++ b/arch/arm/boot/dts/dm8148-evm.dts
@@ -12,13 +12,13 @@
 	model = "DM8148 EVM";
 	compatible = "ti,dm8148-evm", "ti,dm8148";
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x40000000>;	/* 1 GB */
 	};
 
 	/* MIC94060YC6 controlled by SD1_POW pin */
-	vmmcsd_fixed: fixedregulator@0 {
+	vmmcsd_fixed: fixedregulator0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vmmcsd_fixed";
 		regulator-min-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/dm8148-t410.dts b/arch/arm/boot/dts/dm8148-t410.dts
index 3f18486..63883b3 100644
--- a/arch/arm/boot/dts/dm8148-t410.dts
+++ b/arch/arm/boot/dts/dm8148-t410.dts
@@ -11,7 +11,7 @@
 	model = "HP t410 Smart Zero Client";
 	compatible = "hp,t410", "ti,dm8148";
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x40000000>;	/* 1 GB */
 	};
@@ -27,7 +27,7 @@
 		regulator-always-on;
 	};
 
-	vmmcsd_fixed: fixedregulator@0 {
+	vmmcsd_fixed: fixedregulator0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vmmcsd_fixed";
 		regulator-min-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/dm814x.dtsi b/arch/arm/boot/dts/dm814x.dtsi
index 68e412c..ff90a6c 100644
--- a/arch/arm/boot/dts/dm814x.dtsi
+++ b/arch/arm/boot/dts/dm814x.dtsi
@@ -7,11 +7,11 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pinctrl/dm814x.h>
 
-#include "skeleton.dtsi"
-
 / {
 	compatible = "ti,dm814";
 	interrupt-parent = <&intc>;
+	#address-cells = <1>;
+	#size-cells = <1>;
 
 	aliases {
 		i2c0 = &i2c1;
diff --git a/arch/arm/boot/dts/dm8168-evm.dts b/arch/arm/boot/dts/dm8168-evm.dts
index f50348b..0bf55fa 100644
--- a/arch/arm/boot/dts/dm8168-evm.dts
+++ b/arch/arm/boot/dts/dm8168-evm.dts
@@ -12,14 +12,14 @@
 	model = "DM8168 EVM";
 	compatible = "ti,dm8168-evm", "ti,dm8168";
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x40000000	/* 1 GB */
 		       0xc0000000 0x40000000>;	/* 1 GB */
 	};
 
 	/* FDC6331L controlled by SD_POW pin */
-	vmmcsd_fixed: fixedregulator@0 {
+	vmmcsd_fixed: fixedregulator0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vmmcsd_fixed";
 		regulator-min-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi
index 44e39c74..f1e0f77 100644
--- a/arch/arm/boot/dts/dm816x.dtsi
+++ b/arch/arm/boot/dts/dm816x.dtsi
@@ -7,11 +7,11 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pinctrl/omap.h>
 
-#include "skeleton.dtsi"
-
 / {
 	compatible = "ti,dm816";
 	interrupt-parent = <&intc>;
+	#address-cells = <1>;
+	#size-cells = <1>;
 
 	aliases {
 		i2c0 = &i2c1;
diff --git a/arch/arm/boot/dts/dra62x-j5eco-evm.dts b/arch/arm/boot/dts/dra62x-j5eco-evm.dts
index f820573..155eb32 100644
--- a/arch/arm/boot/dts/dra62x-j5eco-evm.dts
+++ b/arch/arm/boot/dts/dra62x-j5eco-evm.dts
@@ -12,13 +12,13 @@
 	model = "DRA62x J5 Eco EVM";
 	compatible = "ti,dra62x-j5eco-evm", "ti,dra62x", "ti,dm8148";
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x40000000>;	/* 1 GB */
 	};
 
 	/* MIC94060YC6 controlled by SD1_POW pin */
-	vmmcsd_fixed: fixedregulator@0 {
+	vmmcsd_fixed: fixedregulator0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vmmcsd_fixed";
 		regulator-min-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index bafcfac..132f2be 100644
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -16,7 +16,7 @@
 	model = "TI DRA742";
 	compatible = "ti,dra7-evm", "ti,dra742", "ti,dra74", "ti,dra7";
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x80000000 0x0 0x60000000>; /* 1536 MB */
 	};
@@ -105,25 +105,25 @@
 
 	leds {
 		compatible = "gpio-leds";
-		led@0 {
+		led0 {
 			label = "dra7:usr1";
 			gpios = <&pcf_lcd 4 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
 
-		led@1 {
+		led1 {
 			label = "dra7:usr2";
 			gpios = <&pcf_lcd 5 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
 
-		led@2 {
+		led2 {
 			label = "dra7:usr3";
 			gpios = <&pcf_lcd 6 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
 
-		led@3 {
+		led3 {
 			label = "dra7:usr4";
 			gpios = <&pcf_lcd 7 GPIO_ACTIVE_LOW>;
 			default-state = "off";
@@ -664,10 +664,10 @@
 &qspi {
 	status = "okay";
 
-	spi-max-frequency = <64000000>;
+	spi-max-frequency = <76800000>;
 	m25p80@0 {
 		compatible = "s25fl256s1";
-		spi-max-frequency = <64000000>;
+		spi-max-frequency = <76800000>;
 		reg = <0>;
 		spi-tx-bus-width = <1>;
 		spi-rx-bus-width = <4>;
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index d9bfb94..d4fcd68 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -10,8 +10,6 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/pinctrl/dra.h>
 
-#include "skeleton.dtsi"
-
 #define MAX_SOURCES 400
 
 / {
@@ -82,9 +80,11 @@
 			compatible = "arm,cortex-a15";
 			reg = <0>;
 
-			operating-points-v2 = <&cpu0_opp_table>;
-			ti,syscon-efuse = <&scm_wkup 0x20c 0xf80000 19>;
-			ti,syscon-rev = <&scm_wkup 0x204>;
+			operating-points = <
+				/* kHz    uV */
+				1000000	1060000
+				1176000	1160000
+				>;
 
 			clocks = <&dpll_mpu_ck>;
 			clock-names = "cpu";
@@ -98,24 +98,6 @@
 		};
 	};
 
-	cpu0_opp_table: opp_table0 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp_nom@1000000000 {
-			opp-hz = /bits/ 64 <1000000000>;
-			opp-microvolt = <1060000 850000 1150000>;
-			opp-supported-hw = <0xFF 0x01>;
-			opp-suspend;
-		};
-
-		opp_od@1176000000 {
-			opp-hz = /bits/ 64 <1176000000>;
-			opp-microvolt = <1160000 885000 1160000>;
-			opp-supported-hw = <0xFF 0x02>;
-		};
-	};
-
 	/*
 	 * The soc node represents the soc top level view. It is used for IPs
 	 * that are not memory mapped in the MPU view or for the MPU itself.
@@ -301,6 +283,7 @@
 					  0x82000000 0 0x20013000 0x13000 0 0xffed000>;
 				#interrupt-cells = <1>;
 				num-lanes = <1>;
+				linux,pci-domain = <0>;
 				ti,hwmods = "pcie1";
 				phys = <&pcie1_phy>;
 				phy-names = "pcie-phy0";
@@ -336,6 +319,7 @@
 					  0x82000000 0 0x30013000 0x13000 0 0xffed000>;
 				#interrupt-cells = <1>;
 				num-lanes = <1>;
+				linux,pci-domain = <1>;
 				ti,hwmods = "pcie2";
 				phys = <&pcie2_phy>;
 				phy-names = "pcie-phy0";
@@ -1413,7 +1397,7 @@
 			ti,hwmods = "ocp2scp1";
 
 			usb2_phy1: phy@4a084000 {
-				compatible = "ti,omap-usb2";
+				compatible = "ti,dra7x-usb2", "ti,omap-usb2";
 				reg = <0x4a084000 0x400>;
 				syscon-phy-power = <&scm_conf 0x300>;
 				clocks = <&usb_phy1_always_on_clk32k>,
@@ -1717,7 +1701,7 @@
 		mac: ethernet@48484000 {
 			compatible = "ti,dra7-cpsw","ti,cpsw";
 			ti,hwmods = "gmac";
-			clocks = <&dpll_gmac_ck>, <&gmac_gmii_ref_clk_div>;
+			clocks = <&gmac_main_clk>, <&gmac_rft_clk_mux>;
 			clock-names = "fck", "cpts";
 			cpdma_channels = <8>;
 			ale_entries = <1024>;
@@ -1726,7 +1710,7 @@
 			mac_control = <0x20>;
 			slaves = <2>;
 			active_slave = <0>;
-			cpts_clock_mult = <0x80000000>;
+			cpts_clock_mult = <0x784CFE14>;
 			cpts_clock_shift = <29>;
 			reg = <0x48484000 0x1000
 			       0x48485200 0x2E00>;
diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi
index 9d3cf50..c94d8d64 100644
--- a/arch/arm/boot/dts/dra72-evm-common.dtsi
+++ b/arch/arm/boot/dts/dra72-evm-common.dtsi
@@ -681,10 +681,10 @@
 &qspi {
 	status = "okay";
 
-	spi-max-frequency = <64000000>;
+	spi-max-frequency = <76800000>;
 	m25p80@0 {
 		compatible = "s25fl256s1";
-		spi-max-frequency = <64000000>;
+		spi-max-frequency = <76800000>;
 		reg = <0>;
 		spi-tx-bus-width = <1>;
 		spi-rx-bus-width = <4>;
diff --git a/arch/arm/boot/dts/dra72-evm-revc.dts b/arch/arm/boot/dts/dra72-evm-revc.dts
index f9cfd3b..064b322 100644
--- a/arch/arm/boot/dts/dra72-evm-revc.dts
+++ b/arch/arm/boot/dts/dra72-evm-revc.dts
@@ -11,7 +11,7 @@
 / {
 	model = "TI DRA722 Rev C EVM";
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x80000000 0x0 0x80000000>; /* 2GB */
 	};
diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts
index cc1d32c..e3a9b69 100644
--- a/arch/arm/boot/dts/dra72-evm.dts
+++ b/arch/arm/boot/dts/dra72-evm.dts
@@ -9,7 +9,7 @@
 / {
 	model = "TI DRA722";
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x80000000 0x0 0x40000000>; /* 1024 MB */
 	};
diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi
index 8987b3e..0a78347 100644
--- a/arch/arm/boot/dts/dra74x.dtsi
+++ b/arch/arm/boot/dts/dra74x.dtsi
@@ -17,7 +17,6 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <1>;
-			operating-points-v2 = <&cpu0_opp_table>;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi
index 8378b44..3330738e 100644
--- a/arch/arm/boot/dts/dra7xx-clocks.dtsi
+++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi
@@ -1003,6 +1003,14 @@
 		ti,index-power-of-two;
 	};
 
+	gmac_main_clk: gmac_main_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&gmac_250m_dclk_div>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
 	l3init_480m_dclk_div: l3init_480m_dclk_div@1ac {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
@@ -1718,13 +1726,12 @@
 		reg = <0x0c00>;
 	};
 
-	gmac_gmii_ref_clk_div: gmac_gmii_ref_clk_div@13d0 {
+	rmii_50mhz_clk_mux: rmii_50mhz_clk_mux@13d0 {
 		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_gmac_m2_ck>;
+		compatible = "ti,mux-clock";
+		clocks = <&dpll_gmac_h11x2_ck>, <&rmii_clk_ck>;
 		ti,bit-shift = <24>;
 		reg = <0x13d0>;
-		ti,dividers = <2>;
 	};
 
 	gmac_rft_clk_mux: gmac_rft_clk_mux@13d0 {
diff --git a/arch/arm/boot/dts/efm32gg-dk3750.dts b/arch/arm/boot/dts/efm32gg-dk3750.dts
index 504cf45..98fc667 100644
--- a/arch/arm/boot/dts/efm32gg-dk3750.dts
+++ b/arch/arm/boot/dts/efm32gg-dk3750.dts
@@ -16,7 +16,8 @@
 		bootargs = "console=ttyefm4,115200 init=/linuxrc ignore_loglevel ihash_entries=64 dhash_entries=64 earlyprintk uclinux.physaddr=0x8c400000 root=/dev/mtdblock0";
 	};
 
-	memory {
+	memory@88000000 {
+		device_type = "memory";
 		reg = <0x88000000 0x400000>;
 	};
 
@@ -74,7 +75,7 @@
 			status = "ok";
 		};
 
-		boardfpga: boardfpga {
+		boardfpga: boardfpga@80000000 {
 			compatible = "efm32board";
 			reg = <0x80000000 0x400>;
 			irq-gpios = <&gpio 64 1>;
diff --git a/arch/arm/boot/dts/efm32gg.dtsi b/arch/arm/boot/dts/efm32gg.dtsi
index c747983..b78c57e 100644
--- a/arch/arm/boot/dts/efm32gg.dtsi
+++ b/arch/arm/boot/dts/efm32gg.dtsi
@@ -4,10 +4,14 @@
  * Documentation available from
  * http://www.silabs.com/Support%20Documents/TechnicalDocs/EFM32GG-RM.pdf
  */
+
 #include "armv7-m.dtsi"
 #include "dt-bindings/clock/efm32-cmu.h"
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
 	aliases {
 		i2c0 = &i2c0;
 		i2c1 = &i2c1;
diff --git a/arch/arm/boot/dts/exynos3250-artik5.dtsi b/arch/arm/boot/dts/exynos3250-artik5.dtsi
index 130e946..a70819b 100644
--- a/arch/arm/boot/dts/exynos3250-artik5.dtsi
+++ b/arch/arm/boot/dts/exynos3250-artik5.dtsi
@@ -24,7 +24,8 @@
 		stdout-path = &serial_2;
 	};
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg = <0x40000000 0x1ff00000>;
 	};
 
diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts
index 8c89062..66f04f6 100644
--- a/arch/arm/boot/dts/exynos3250-monk.dts
+++ b/arch/arm/boot/dts/exynos3250-monk.dts
@@ -27,7 +27,8 @@
 		i2c7 = &i2c_max77836;
 	};
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg =  <0x40000000 0x1ff00000>;
 	};
 
diff --git a/arch/arm/boot/dts/exynos3250-pinctrl.dtsi b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
index 40ea7de..ec331169 100644
--- a/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
@@ -12,58 +12,46 @@
  * published by the Free Software Foundation.
 */
 
-#define PIN_PULL_NONE		0
-#define PIN_PULL_DOWN		1
-#define PIN_PULL_UP		3
+#include <dt-bindings/pinctrl/samsung.h>
 
-#define PIN_DRV_LV1		0
-#define PIN_DRV_LV2		2
-#define PIN_DRV_LV3		1
-#define PIN_DRV_LV4		3
-
-#define PIN_PDN_OUT0		0
-#define PIN_PDN_OUT1		1
-#define PIN_PDN_INPUT		2
-#define PIN_PDN_PREV		3
-
-#define PIN_IN(_pin, _pull, _drv)			\
-	_pin {						\
-		samsung,pins = #_pin;			\
-		samsung,pin-function = <0>;		\
-		samsung,pin-pud = <PIN_PULL_ ##_pull>;	\
-		samsung,pin-drv = <PIN_DRV_ ##_drv>;	\
+#define PIN_IN(_pin, _pull, _drv)					\
+	_pin {								\
+		samsung,pins = #_pin;					\
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;		\
+		samsung,pin-pud = <EXYNOS_PIN_PULL_ ##_pull>;		\
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_ ##_drv>;		\
 	}
 
-#define PIN_OUT(_pin, _drv)				\
-	_pin {						\
-		samsung,pins = #_pin;			\
-		samsung,pin-function = <1>;		\
-		samsung,pin-pud = <0>;			\
-		samsung,pin-drv = <PIN_DRV_ ##_drv>;	\
+#define PIN_OUT(_pin, _drv)						\
+	_pin {								\
+		samsung,pins = #_pin;					\
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;	\
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;		\
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_ ##_drv>;		\
 	}
 
-#define PIN_OUT_SET(_pin, _val, _drv)			\
-	_pin {						\
-		samsung,pins = #_pin;			\
-		samsung,pin-function = <1>;		\
-		samsung,pin-pud = <0>;			\
-		samsung,pin-drv = <PIN_DRV_ ##_drv>;	\
-		samsung,pin-val = <_val>;		\
+#define PIN_OUT_SET(_pin, _val, _drv)					\
+	_pin {								\
+		samsung,pins = #_pin;					\
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;	\
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;		\
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_ ##_drv>;		\
+		samsung,pin-val = <_val>;				\
 	}
 
-#define PIN_CFG(_pin, _sel, _pull, _drv)		\
-	_pin {						\
-		samsung,pins = #_pin;			\
-		samsung,pin-function = <_sel>;		\
-		samsung,pin-pud = <PIN_PULL_ ##_pull>;	\
-		samsung,pin-drv = <PIN_DRV_ ##_drv>;	\
+#define PIN_CFG(_pin, _sel, _pull, _drv)				\
+	_pin {								\
+		samsung,pins = #_pin;					\
+		samsung,pin-function = <_sel>;				\
+		samsung,pin-pud = <EXYNOS_PIN_PULL_ ##_pull>;		\
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_ ##_drv>;		\
 	}
 
-#define PIN_SLP(_pin, _mode, _pull)				\
-	_pin {							\
-		samsung,pins = #_pin;				\
-		samsung,pin-con-pdn = <PIN_PDN_ ##_mode>;	\
-		samsung,pin-pud-pdn = <PIN_PULL_ ##_pull>;	\
+#define PIN_SLP(_pin, _mode, _pull)					\
+	_pin {								\
+		samsung,pins = #_pin;					\
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_ ##_mode>;	\
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_ ##_pull>;	\
 	}
 
 &pinctrl_0 {
@@ -125,158 +113,158 @@
 
 	uart0_data: uart0-data {
 		samsung,pins = "gpa0-0", "gpa0-1";
-		samsung,pin-function = <0x2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	uart0_fctl: uart0-fctl {
 		samsung,pins = "gpa0-2", "gpa0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	uart1_data: uart1-data {
 		samsung,pins = "gpa0-4", "gpa0-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	uart1_fctl: uart1-fctl {
 		samsung,pins = "gpa0-6", "gpa0-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c2_bus: i2c2-bus {
 		samsung,pins = "gpa0-6", "gpa0-7";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	uart2_data: uart2-data {
 		samsung,pins = "gpa1-0", "gpa1-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c3_bus: i2c3-bus {
 		samsung,pins = "gpa1-2", "gpa1-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	spi0_bus: spi0-bus {
 		samsung,pins = "gpb-0", "gpb-2", "gpb-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c4_bus: i2c4-bus {
 		samsung,pins = "gpb-0", "gpb-1";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	spi1_bus: spi1-bus {
 		samsung,pins = "gpb-4", "gpb-6", "gpb-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c5_bus: i2c5-bus {
 		samsung,pins = "gpb-2", "gpb-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2s2_bus: i2s2-bus {
 		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
 				"gpc1-4";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	pcm2_bus: pcm2-bus {
 		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
 				"gpc1-4";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c6_bus: i2c6-bus {
 		samsung,pins = "gpc1-3", "gpc1-4";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	pwm0_out: pwm0-out {
 		samsung,pins = "gpd0-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	pwm1_out: pwm1-out {
 		samsung,pins = "gpd0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c7_bus: i2c7-bus {
 		samsung,pins = "gpd0-2", "gpd0-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	pwm2_out: pwm2-out {
 		samsung,pins = "gpd0-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	pwm3_out: pwm3-out {
 		samsung,pins = "gpd0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c0_bus: i2c0-bus {
 		samsung,pins = "gpd1-0", "gpd1-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	mipi0_clk: mipi0-clk {
 		samsung,pins = "gpd1-0", "gpd1-1";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c1_bus: i2c1-bus {
 		samsung,pins = "gpd1-2", "gpd1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
 
@@ -408,164 +396,164 @@
 
 	sd0_clk: sd0-clk {
 		samsung,pins = "gpk0-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd0_cmd: sd0-cmd {
 		samsung,pins = "gpk0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd0_cd: sd0-cd {
 		samsung,pins = "gpk0-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd0_rdqs: sd0-rdqs {
 		samsung,pins = "gpk0-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd0_bus1: sd0-bus-width1 {
 		samsung,pins = "gpk0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd0_bus4: sd0-bus-width4 {
 		samsung,pins = "gpk0-4", "gpk0-5", "gpk0-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd0_bus8: sd0-bus-width8 {
 		samsung,pins = "gpl0-0", "gpl0-1", "gpl0-2", "gpl0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd1_clk: sd1-clk {
 		samsung,pins = "gpk1-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd1_cmd: sd1-cmd {
 		samsung,pins = "gpk1-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd1_cd: sd1-cd {
 		samsung,pins = "gpk1-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd1_bus1: sd1-bus-width1 {
 		samsung,pins = "gpk1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd1_bus4: sd1-bus-width4 {
 		samsung,pins = "gpk1-4", "gpk1-5", "gpk1-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd2_clk: sd2-clk {
 		samsung,pins = "gpk2-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd2_cmd: sd2-cmd {
 		samsung,pins = "gpk2-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd2_cd: sd2-cd {
 		samsung,pins = "gpk2-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd2_bus1: sd2-bus-width1 {
 		samsung,pins = "gpk2-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd2_bus4: sd2-bus-width4 {
 		samsung,pins = "gpk2-4", "gpk2-5", "gpk2-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	cam_port_b_io: cam-port-b-io {
 		samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3",
 				"gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7",
 				"gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	cam_port_b_clk_active: cam-port-b-clk-active {
 		samsung,pins = "gpm2-2";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	cam_port_b_clk_idle: cam-port-b-clk-idle {
 		samsung,pins = "gpm2-2";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	fimc_is_i2c0: fimc-is-i2c0 {
 		samsung,pins = "gpm4-0", "gpm4-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	fimc_is_i2c1: fimc-is-i2c1 {
 		samsung,pins = "gpm4-2", "gpm4-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	fimc_is_uart: fimc-is-uart {
 		samsung,pins = "gpm3-5", "gpm3-7";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts
index a9218136..3967ee5 100644
--- a/arch/arm/boot/dts/exynos3250-rinato.dts
+++ b/arch/arm/boot/dts/exynos3250-rinato.dts
@@ -27,7 +27,8 @@
 		i2c7 = &i2c_max77836;
 	};
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg =  <0x40000000 0x1ff00000>;
 	};
 
diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
index 70e3ace..e9d2556 100644
--- a/arch/arm/boot/dts/exynos3250.dtsi
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -17,7 +17,6 @@
  * published by the Free Software Foundation.
  */
 
-#include "skeleton.dtsi"
 #include "exynos4-cpu-thermal.dtsi"
 #include "exynos-syscon-restart.dtsi"
 #include <dt-bindings/clock/exynos3250.h>
@@ -25,6 +24,8 @@
 / {
 	compatible = "samsung,exynos3250";
 	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
 
 	aliases {
 		pinctrl0 = &pinctrl_0;
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index 32f22e1..5f034eb 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -21,11 +21,12 @@
 
 #include <dt-bindings/clock/exynos4.h>
 #include <dt-bindings/clock/exynos-audss-clk.h>
-#include "skeleton.dtsi"
 #include "exynos-syscon-restart.dtsi"
 
 / {
 	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
 
 	aliases {
 		spi0 = &spi_0;
diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts
index be2751e..a2c6a13 100644
--- a/arch/arm/boot/dts/exynos4210-origen.dts
+++ b/arch/arm/boot/dts/exynos4210-origen.dts
@@ -24,7 +24,8 @@
 	model = "Insignal Origen evaluation board based on Exynos4210";
 	compatible = "insignal,origen", "samsung,exynos4210", "samsung,exynos4";
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg = <0x40000000 0x10000000
 		       0x50000000 0x10000000
 		       0x60000000 0x10000000
diff --git a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
index 9331c62..d9b6d25 100644
--- a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
@@ -14,6 +14,8 @@
  * published by the Free Software Foundation.
 */
 
+#include <dt-bindings/pinctrl/samsung.h>
+
 / {
 	pinctrl@11400000 {
 		gpa0: gpa0 {
@@ -146,245 +148,245 @@
 
 		uart0_data: uart0-data {
 			samsung,pins = "gpa0-0", "gpa0-1";
-			samsung,pin-function = <0x2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		uart0_fctl: uart0-fctl {
 			samsung,pins = "gpa0-2", "gpa0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		uart1_data: uart1-data {
 			samsung,pins = "gpa0-4", "gpa0-5";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		uart1_fctl: uart1-fctl {
 			samsung,pins = "gpa0-6", "gpa0-7";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		i2c2_bus: i2c2-bus {
 			samsung,pins = "gpa0-6", "gpa0-7";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		uart2_data: uart2-data {
 			samsung,pins = "gpa1-0", "gpa1-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		uart2_fctl: uart2-fctl {
 			samsung,pins = "gpa1-2", "gpa1-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		uart_audio_a: uart-audio-a {
 			samsung,pins = "gpa1-0", "gpa1-1";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		i2c3_bus: i2c3-bus {
 			samsung,pins = "gpa1-2", "gpa1-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		uart3_data: uart3-data {
 			samsung,pins = "gpa1-4", "gpa1-5";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		uart_audio_b: uart-audio-b {
 			samsung,pins = "gpa1-4", "gpa1-5";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		spi0_bus: spi0-bus {
 			samsung,pins = "gpb-0", "gpb-2", "gpb-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		i2c4_bus: i2c4-bus {
 			samsung,pins = "gpb-2", "gpb-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		spi1_bus: spi1-bus {
 			samsung,pins = "gpb-4", "gpb-6", "gpb-7";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		i2c5_bus: i2c5-bus {
 			samsung,pins = "gpb-6", "gpb-7";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		i2s1_bus: i2s1-bus {
 			samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
 					"gpc0-4";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		pcm1_bus: pcm1-bus {
 			samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
 					"gpc0-4";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		ac97_bus: ac97-bus {
 			samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
 					"gpc0-4";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		i2s2_bus: i2s2-bus {
 			samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
 					"gpc1-4";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		pcm2_bus: pcm2-bus {
 			samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
 					"gpc1-4";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		spdif_bus: spdif-bus {
 			samsung,pins = "gpc1-0", "gpc1-1";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		i2c6_bus: i2c6-bus {
 			samsung,pins = "gpc1-3", "gpc1-4";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		spi2_bus: spi2-bus {
 			samsung,pins = "gpc1-1", "gpc1-2", "gpc1-3", "gpc1-4";
-			samsung,pin-function = <5>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		i2c7_bus: i2c7-bus {
 			samsung,pins = "gpd0-2", "gpd0-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		i2c0_bus: i2c0-bus {
 			samsung,pins = "gpd1-0", "gpd1-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		i2c1_bus: i2c1-bus {
 			samsung,pins = "gpd1-2", "gpd1-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		pwm0_out: pwm0-out {
 			samsung,pins = "gpd0-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		pwm1_out: pwm1-out {
 			samsung,pins = "gpd0-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		pwm2_out: pwm2-out {
 			samsung,pins = "gpd0-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		pwm3_out: pwm3-out {
 			samsung,pins = "gpd0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		lcd_ctrl: lcd-ctrl {
 			samsung,pins = "gpd0-0", "gpd0-1";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		lcd_sync: lcd-sync {
 			samsung,pins = "gpf0-0", "gpf0-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		lcd_en: lcd-en {
 			samsung,pins = "gpe3-4";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		lcd_clk: lcd-clk {
 			samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		lcd_data16: lcd-data-width16 {
@@ -392,9 +394,9 @@
 					"gpf1-3", "gpf1-6", "gpf1-7", "gpf2-0",
 					"gpf2-1", "gpf2-2", "gpf2-3", "gpf2-7",
 					"gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		lcd_data18: lcd-data-width18 {
@@ -403,9 +405,9 @@
 					"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
 					"gpf2-6", "gpf2-7", "gpf3-0", "gpf3-1",
 					"gpf3-2", "gpf3-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		lcd_data24: lcd-data-width24 {
@@ -415,9 +417,9 @@
 					"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
 					"gpf2-4", "gpf2-5", "gpf2-6", "gpf2-7",
 					"gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 	};
 
@@ -569,263 +571,263 @@
 
 		sd0_clk: sd0-clk {
 			samsung,pins = "gpk0-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd0_cmd: sd0-cmd {
 			samsung,pins = "gpk0-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd0_cd: sd0-cd {
 			samsung,pins = "gpk0-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd0_bus1: sd0-bus-width1 {
 			samsung,pins = "gpk0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd0_bus4: sd0-bus-width4 {
 			samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd0_bus8: sd0-bus-width8 {
 			samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd4_clk: sd4-clk {
 			samsung,pins = "gpk0-0";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd4_cmd: sd4-cmd {
 			samsung,pins = "gpk0-1";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd4_cd: sd4-cd {
 			samsung,pins = "gpk0-2";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd4_bus1: sd4-bus-width1 {
 			samsung,pins = "gpk0-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd4_bus4: sd4-bus-width4 {
 			samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd4_bus8: sd4-bus-width8 {
 			samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <4>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd1_clk: sd1-clk {
 			samsung,pins = "gpk1-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd1_cmd: sd1-cmd {
 			samsung,pins = "gpk1-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd1_cd: sd1-cd {
 			samsung,pins = "gpk1-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd1_bus1: sd1-bus-width1 {
 			samsung,pins = "gpk1-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd1_bus4: sd1-bus-width4 {
 			samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd2_clk: sd2-clk {
 			samsung,pins = "gpk2-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd2_cmd: sd2-cmd {
 			samsung,pins = "gpk2-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd2_cd: sd2-cd {
 			samsung,pins = "gpk2-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd2_bus1: sd2-bus-width1 {
 			samsung,pins = "gpk2-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd2_bus4: sd2-bus-width4 {
 			samsung,pins = "gpk2-3", "gpk2-4", "gpk2-5", "gpk2-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd2_bus8: sd2-bus-width8 {
 			samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd3_clk: sd3-clk {
 			samsung,pins = "gpk3-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd3_cmd: sd3-cmd {
 			samsung,pins = "gpk3-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd3_cd: sd3-cd {
 			samsung,pins = "gpk3-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd3_bus1: sd3-bus-width1 {
 			samsung,pins = "gpk3-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd3_bus4: sd3-bus-width4 {
 			samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		eint0: ext-int0 {
 			samsung,pins = "gpx0-0";
-			samsung,pin-function = <0xf>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		eint8: ext-int8 {
 			samsung,pins = "gpx1-0";
-			samsung,pin-function = <0xf>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		eint15: ext-int15 {
 			samsung,pins = "gpx1-7";
-			samsung,pin-function = <0xf>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		eint16: ext-int16 {
 			samsung,pins = "gpx2-0";
-			samsung,pin-function = <0xf>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		eint31: ext-int31 {
 			samsung,pins = "gpx3-7";
-			samsung,pin-function = <0xf>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		cam_port_a_io: cam-port-a-io {
 			samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3",
 					"gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7",
 					"gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		cam_port_a_clk_active: cam-port-a-clk-active {
 			samsung,pins = "gpj1-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		cam_port_a_clk_idle: cam-port-a-clk-idle {
 			samsung,pins = "gpj1-3";
-			samsung,pin-function = <0>;
-			samsung,pin-pud = <1>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		hdmi_cec: hdmi-cec {
 			samsung,pins = "gpx3-6";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 	};
 
@@ -838,17 +840,17 @@
 		i2s0_bus: i2s0-bus {
 			samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
 					"gpz-4", "gpz-5", "gpz-6";
-			samsung,pin-function = <0x2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		pcm0_bus: pcm0-bus {
 			samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
 					"gpz-4";
-			samsung,pin-function = <0x3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts
index 847fae3..9c98a37 100644
--- a/arch/arm/boot/dts/exynos4210-smdkv310.dts
+++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts
@@ -23,7 +23,8 @@
 	model = "Samsung smdkv310 evaluation board based on Exynos4210";
 	compatible = "samsung,smdkv310", "samsung,exynos4210", "samsung,exynos4";
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg = <0x40000000 0x80000000>;
 	};
 
@@ -136,17 +137,17 @@
 &pinctrl_1 {
 	keypad_rows: keypad-rows {
 		samsung,pins = "gpx2-0", "gpx2-1";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	keypad_cols: keypad-cols {
 		samsung,pins = "gpx1-0", "gpx1-1", "gpx1-2", "gpx1-3",
 			       "gpx1-4", "gpx1-5", "gpx1-6", "gpx1-7";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts
index 79d98303..0ca1b4d3 100644
--- a/arch/arm/boot/dts/exynos4210-trats.dts
+++ b/arch/arm/boot/dts/exynos4210-trats.dts
@@ -20,7 +20,8 @@
 	model = "Samsung Trats based on Exynos4210";
 	compatible = "samsung,trats", "samsung,exynos4210", "samsung,exynos4";
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg =  <0x40000000 0x10000000
 			0x50000000 0x10000000
 			0x60000000 0x10000000
diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts
index 9a75e3e..0c89ea9 100644
--- a/arch/arm/boot/dts/exynos4210-universal_c210.dts
+++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts
@@ -20,7 +20,8 @@
 	model = "Samsung Universal C210 based on Exynos4210 rev0";
 	compatible = "samsung,universal_c210", "samsung,exynos4210", "samsung,exynos4";
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg =  <0x40000000 0x10000000
 			0x50000000 0x10000000>;
 	};
@@ -269,7 +270,7 @@
 };
 
 &hdmi {
-	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&hdmi_hpd>;
 	hdmi-en-supply = <&hdmi_en>;
@@ -521,16 +522,16 @@
 &pinctrl_1 {
 	hdmi_hpd: hdmi-hpd {
 		samsung,pins = "gpx3-7";
-		samsung,pin-pud = <0>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 };
 
 &pinctrl_0 {
 	i2c_ddc_bus: i2c-ddc-bus {
 		samsung,pins = "gpe4-2", "gpe4-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
index 58ad48e7..8aa19ba 100644
--- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
+++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
@@ -163,26 +163,26 @@
 
 /* RSTN signal for eMMC */
 &sd1_cd {
-	samsung,pin-pud = <0>;
-	samsung,pin-drv = <0>;
+	samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 };
 
 &pinctrl_1 {
 	gpio_power_key: power_key {
 		samsung,pins = "gpx1-3";
-		samsung,pin-pud = <0>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
 	max77686_irq: max77686-irq {
 		samsung,pins = "gpx3-2";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	hdmi_hpd: hdmi-hpd {
 		samsung,pins = "gpx3-7";
-		samsung,pin-pud = <1>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
 	};
 };
 
@@ -227,7 +227,7 @@
 };
 
 &hdmi {
-	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&hdmi_hpd>;
 	vdd-supply = <&ldo8_reg>;
diff --git a/arch/arm/boot/dts/exynos4412-odroidu3.dts b/arch/arm/boot/dts/exynos4412-odroidu3.dts
index d73aa6c..99634c5 100644
--- a/arch/arm/boot/dts/exynos4412-odroidu3.dts
+++ b/arch/arm/boot/dts/exynos4412-odroidu3.dts
@@ -18,7 +18,8 @@
 	model = "Hardkernel ODROID-U3 board based on Exynos4412";
 	compatible = "hardkernel,odroid-u3", "samsung,exynos4412", "samsung,exynos4";
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg = <0x40000000 0x7FF00000>;
 	};
 
diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts
index 2af2351..61906b3 100644
--- a/arch/arm/boot/dts/exynos4412-odroidx.dts
+++ b/arch/arm/boot/dts/exynos4412-odroidx.dts
@@ -18,7 +18,8 @@
 	model = "Hardkernel ODROID-X board based on Exynos4412";
 	compatible = "hardkernel,odroid-x", "samsung,exynos4412", "samsung,exynos4";
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg = <0x40000000 0x3FF00000>;
 	};
 
@@ -83,7 +84,7 @@
 &pinctrl_1 {
 	gpio_home_key: home_key {
 		samsung,pins = "gpx2-2";
-		samsung,pin-pud = <0>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/exynos4412-odroidx2.dts b/arch/arm/boot/dts/exynos4412-odroidx2.dts
index 3e35842..4d22885 100644
--- a/arch/arm/boot/dts/exynos4412-odroidx2.dts
+++ b/arch/arm/boot/dts/exynos4412-odroidx2.dts
@@ -17,7 +17,8 @@
 	model = "Hardkernel ODROID-X2 board based on Exynos4412";
 	compatible = "hardkernel,odroid-x2", "samsung,exynos4412", "samsung,exynos4";
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg = <0x40000000 0x7FF00000>;
 	};
 };
diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts
index 26a36fe..a1ab6f9 100644
--- a/arch/arm/boot/dts/exynos4412-origen.dts
+++ b/arch/arm/boot/dts/exynos4412-origen.dts
@@ -22,7 +22,8 @@
 	model = "Insignal Origen evaluation board based on Exynos4412";
 	compatible = "insignal,origen4412", "samsung,exynos4412", "samsung,exynos4";
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg = <0x40000000 0x40000000>;
 	};
 
@@ -500,16 +501,16 @@
 &pinctrl_1 {
 	keypad_rows: keypad-rows {
 		samsung,pins = "gpx2-0", "gpx2-1", "gpx2-2";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	keypad_cols: keypad-cols {
 		samsung,pins = "gpx1-0", "gpx1-1";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts b/arch/arm/boot/dts/exynos4412-smdk4412.dts
index 231ffbd..7fcb434 100644
--- a/arch/arm/boot/dts/exynos4412-smdk4412.dts
+++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts
@@ -20,7 +20,8 @@
 	model = "Samsung SMDK evaluation board based on Exynos4412";
 	compatible = "samsung,smdk4412", "samsung,exynos4412", "samsung,exynos4";
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg = <0x40000000 0x40000000>;
 	};
 
@@ -115,17 +116,17 @@
 &pinctrl_1 {
 	keypad_rows: keypad-rows {
 		samsung,pins = "gpx2-0", "gpx2-1", "gpx2-2";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	keypad_cols: keypad-cols {
 		samsung,pins = "gpx1-0", "gpx1-1", "gpx1-2", "gpx1-3",
 			       "gpx1-4", "gpx1-5", "gpx1-6", "gpx1-7";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/exynos4412-tiny4412.dts b/arch/arm/boot/dts/exynos4412-tiny4412.dts
index 4840bbd..5504398 100644
--- a/arch/arm/boot/dts/exynos4412-tiny4412.dts
+++ b/arch/arm/boot/dts/exynos4412-tiny4412.dts
@@ -23,7 +23,8 @@
 		stdout-path = &serial_0;
 	};
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg = <0x40000000 0x40000000>;
 	};
 
diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts
index 129e973..41ecd6d 100644
--- a/arch/arm/boot/dts/exynos4412-trats2.dts
+++ b/arch/arm/boot/dts/exynos4412-trats2.dts
@@ -30,7 +30,8 @@
 		i2c12 = &i2c_max77693_fuel;
 	};
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg =  <0x40000000 0x40000000>;
 	};
 
diff --git a/arch/arm/boot/dts/exynos4415-pinctrl.dtsi b/arch/arm/boot/dts/exynos4415-pinctrl.dtsi
index 75af9c5..76cfd87 100644
--- a/arch/arm/boot/dts/exynos4415-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos4415-pinctrl.dtsi
@@ -11,6 +11,8 @@
  * published by the Free Software Foundation.
 */
 
+#include <dt-bindings/pinctrl/samsung.h>
+
 &pinctrl_0 {
 	gpa0: gpa0 {
 		gpio-controller;
@@ -94,180 +96,180 @@
 
 	uart0_data: uart0-data {
 		samsung,pins = "gpa0-0", "gpa0-1";
-		samsung,pin-function = <0x2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	uart0_fctl: uart0-fctl {
 		samsung,pins = "gpa0-2", "gpa0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	uart1_data: uart1-data {
 		samsung,pins = "gpa0-4", "gpa0-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	uart1_fctl: uart1-fctl {
 		samsung,pins = "gpa0-6", "gpa0-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	uart2_data: uart2-data {
 		samsung,pins = "gpa1-0", "gpa1-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	uart2_fctl: uart2-fctl {
 		samsung,pins = "gpa1-2", "gpa1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	uart3_data: uart3-data {
 		samsung,pins = "gpa1-4", "gpa1-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c2_bus: i2c2-bus {
 		samsung,pins = "gpa0-6", "gpa0-7";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c3_bus: i2c3-bus {
 		samsung,pins = "gpa1-2", "gpa1-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	spi0_bus: spi0-bus {
 		samsung,pins = "gpb-0", "gpb-2", "gpb-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c4_bus: i2c4-bus {
 		samsung,pins = "gpb-0", "gpb-1";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	spi1_bus: spi1-bus {
 		samsung,pins = "gpb-4", "gpb-6", "gpb-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c5_bus: i2c5-bus {
 		samsung,pins = "gpb-2", "gpb-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2s1_bus: i2s1-bus {
 		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
 				"gpc0-4";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2s2_bus: i2s2-bus {
 		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
 				"gpc1-4";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	pcm2_bus: pcm2-bus {
 		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
 				"gpc1-4";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c6_bus: i2c6-bus {
 		samsung,pins = "gpc1-3", "gpc1-4";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	spi2_bus: spi2-bus {
 		samsung,pins = "gpc1-1", "gpc1-3", "gpc1-4";
-		samsung,pin-function = <5>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	pwm0_out: pwm0-out {
 		samsung,pins = "gpd0-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	pwm1_out: pwm1-out {
 		samsung,pins = "gpd0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	pwm2_out: pwm2-out {
 		samsung,pins = "gpd0-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	pwm3_out: pwm3-out {
 		samsung,pins = "gpd0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c7_bus: i2c7-bus {
 		samsung,pins = "gpd0-2", "gpd0-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c0_bus: i2c0-bus {
 		samsung,pins = "gpd1-0", "gpd1-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c1_bus: i2c1-bus {
 		samsung,pins = "gpd1-2", "gpd1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
 
@@ -392,165 +394,165 @@
 
 	sd0_clk: sd0-clk {
 		samsung,pins = "gpk0-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd0_cmd: sd0-cmd {
 		samsung,pins = "gpk0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd0_cd: sd0-cd {
 		samsung,pins = "gpk0-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd0_rdqs: sd0-rdqs {
 		samsung,pins = "gpk0-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd0_bus1: sd0-bus-width1 {
 		samsung,pins = "gpk0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd0_bus4: sd0-bus-width4 {
 		samsung,pins = "gpk0-4", "gpk0-5", "gpk0-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd0_bus8: sd0-bus-width8 {
 		samsung,pins = "gpl0-0", "gpl0-1", "gpl0-2", "gpl0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd1_clk: sd1-clk {
 		samsung,pins = "gpk1-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd1_cmd: sd1-cmd {
 		samsung,pins = "gpk1-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd1_cd: sd1-cd {
 		samsung,pins = "gpk1-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd1_bus1: sd1-bus-width1 {
 		samsung,pins = "gpk1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd1_bus4: sd1-bus-width4 {
 		samsung,pins = "gpk1-4", "gpk1-5", "gpk1-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd2_clk: sd2-clk {
 		samsung,pins = "gpk2-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <4>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd2_cmd: sd2-cmd {
 		samsung,pins = "gpk2-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <4>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd2_cd: sd2-cd {
 		samsung,pins = "gpk2-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd2_bus1: sd2-bus-width1 {
 		samsung,pins = "gpk2-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <4>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd2_bus4: sd2-bus-width4 {
 		samsung,pins = "gpk2-4", "gpk2-5", "gpk2-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <4>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	cam_port_b_io: cam-port-b-io {
 		samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3",
 				"gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7",
 				"gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	cam_port_b_clk_active: cam-port-b-clk-active {
 		samsung,pins = "gpm2-2";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	cam_port_b_clk_idle: cam-port-b-clk-idle {
 		samsung,pins = "gpm2-2";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	fimc_is_i2c0: fimc-is-i2c0 {
 		samsung,pins = "gpm4-0", "gpm4-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	fimc_is_i2c1: fimc-is-i2c1 {
 		samsung,pins = "gpm4-2", "gpm4-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	fimc_is_uart: fimc-is-uart {
 		samsung,pins = "gpm3-5", "gpm3-7";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
 
@@ -566,8 +568,8 @@
 	i2s0_bus: i2s0-bus {
 		samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
 				"gpz-4", "gpz-5", "gpz-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
diff --git a/arch/arm/boot/dts/exynos4415.dtsi b/arch/arm/boot/dts/exynos4415.dtsi
index 28b04b6..3c40f8a 100644
--- a/arch/arm/boot/dts/exynos4415.dtsi
+++ b/arch/arm/boot/dts/exynos4415.dtsi
@@ -16,13 +16,14 @@
  * published by the Free Software Foundation.
  */
 
-#include "skeleton.dtsi"
 #include <dt-bindings/clock/exynos4415.h>
 #include <dt-bindings/clock/exynos-audss-clk.h>
 
 / {
 	compatible = "samsung,exynos4415";
 	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
 
 	aliases {
 		pinctrl0 = &pinctrl_0;
diff --git a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
index 856b292..a56bf9b 100644
--- a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
@@ -12,20 +12,13 @@
  * published by the Free Software Foundation.
 */
 
-#define PIN_PULL_NONE		0
-#define PIN_PULL_DOWN		1
-#define PIN_PULL_UP		3
+#include <dt-bindings/pinctrl/samsung.h>
 
-#define PIN_PDN_OUT0		0
-#define PIN_PDN_OUT1		1
-#define PIN_PDN_INPUT		2
-#define PIN_PDN_PREV		3
-
-#define PIN_SLP(_pin, _mode, _pull)				\
-	_pin {							\
-		samsung,pins = #_pin;				\
-		samsung,pin-con-pdn = <PIN_PDN_ ##_mode>;	\
-		samsung,pin-pud-pdn = <PIN_PULL_ ##_pull>;	\
+#define PIN_SLP(_pin, _mode, _pull)					\
+	_pin {								\
+		samsung,pins = #_pin;					\
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_ ##_mode>;	\
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_ ##_pull>;	\
 	}
 
 / {
@@ -136,245 +129,245 @@
 
 		uart0_data: uart0-data {
 			samsung,pins = "gpa0-0", "gpa0-1";
-			samsung,pin-function = <0x2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		uart0_fctl: uart0-fctl {
 			samsung,pins = "gpa0-2", "gpa0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		uart1_data: uart1-data {
 			samsung,pins = "gpa0-4", "gpa0-5";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		uart1_fctl: uart1-fctl {
 			samsung,pins = "gpa0-6", "gpa0-7";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		i2c2_bus: i2c2-bus {
 			samsung,pins = "gpa0-6", "gpa0-7";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		uart2_data: uart2-data {
 			samsung,pins = "gpa1-0", "gpa1-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		uart2_fctl: uart2-fctl {
 			samsung,pins = "gpa1-2", "gpa1-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		uart_audio_a: uart-audio-a {
 			samsung,pins = "gpa1-0", "gpa1-1";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		i2c3_bus: i2c3-bus {
 			samsung,pins = "gpa1-2", "gpa1-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		uart3_data: uart3-data {
 			samsung,pins = "gpa1-4", "gpa1-5";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		uart_audio_b: uart-audio-b {
 			samsung,pins = "gpa1-4", "gpa1-5";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		spi0_bus: spi0-bus {
 			samsung,pins = "gpb-0", "gpb-2", "gpb-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		i2c4_bus: i2c4-bus {
 			samsung,pins = "gpb-0", "gpb-1";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		spi1_bus: spi1-bus {
 			samsung,pins = "gpb-4", "gpb-6", "gpb-7";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		i2c5_bus: i2c5-bus {
 			samsung,pins = "gpb-2", "gpb-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		i2s1_bus: i2s1-bus {
 			samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
 					"gpc0-4";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		pcm1_bus: pcm1-bus {
 			samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
 					"gpc0-4";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		ac97_bus: ac97-bus {
 			samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
 					"gpc0-4";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		i2s2_bus: i2s2-bus {
 			samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
 					"gpc1-4";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		pcm2_bus: pcm2-bus {
 			samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
 					"gpc1-4";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		spdif_bus: spdif-bus {
 			samsung,pins = "gpc1-0", "gpc1-1";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		i2c6_bus: i2c6-bus {
 			samsung,pins = "gpc1-3", "gpc1-4";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		spi2_bus: spi2-bus {
 			samsung,pins = "gpc1-1", "gpc1-3", "gpc1-4";
-			samsung,pin-function = <5>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		pwm0_out: pwm0-out {
 			samsung,pins = "gpd0-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		pwm1_out: pwm1-out {
 			samsung,pins = "gpd0-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		lcd_ctrl: lcd-ctrl {
 			samsung,pins = "gpd0-0", "gpd0-1";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		i2c7_bus: i2c7-bus {
 			samsung,pins = "gpd0-2", "gpd0-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		pwm2_out: pwm2-out {
 			samsung,pins = "gpd0-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		pwm3_out: pwm3-out {
 			samsung,pins = "gpd0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		i2c0_bus: i2c0-bus {
 			samsung,pins = "gpd1-0", "gpd1-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		mipi0_clk: mipi0-clk {
 			samsung,pins = "gpd1-0", "gpd1-1";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		i2c1_bus: i2c1-bus {
 			samsung,pins = "gpd1-2", "gpd1-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		mipi1_clk: mipi1-clk {
 			samsung,pins = "gpd1-2", "gpd1-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		lcd_clk: lcd-clk {
 			samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		lcd_data16: lcd-data-width16 {
@@ -382,9 +375,9 @@
 					"gpf1-3", "gpf1-6", "gpf1-7", "gpf2-0",
 					"gpf2-1", "gpf2-2", "gpf2-3", "gpf2-7",
 					"gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		lcd_data18: lcd-data-width18 {
@@ -393,9 +386,9 @@
 					"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
 					"gpf2-6", "gpf2-7", "gpf3-0", "gpf3-1",
 					"gpf3-2", "gpf3-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		lcd_data24: lcd-data-width24 {
@@ -405,39 +398,39 @@
 					"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
 					"gpf2-4", "gpf2-5", "gpf2-6", "gpf2-7",
 					"gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		lcd_ldi: lcd-ldi {
 			samsung,pins = "gpf3-4";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		cam_port_a_io: cam-port-a-io {
 			samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3",
 					"gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7",
 					"gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		cam_port_a_clk_active: cam-port-a-clk-active {
 			samsung,pins = "gpj1-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		cam_port_a_clk_idle: cam-port-a-clk-idle {
 			samsung,pins = "gpj1-3";
-			samsung,pin-function = <0>;
-			samsung,pin-pud = <1>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 	};
 
@@ -613,284 +606,284 @@
 
 		sd0_clk: sd0-clk {
 			samsung,pins = "gpk0-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd0_cmd: sd0-cmd {
 			samsung,pins = "gpk0-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd0_cd: sd0-cd {
 			samsung,pins = "gpk0-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd0_bus1: sd0-bus-width1 {
 			samsung,pins = "gpk0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd0_bus4: sd0-bus-width4 {
 			samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd0_bus8: sd0-bus-width8 {
 			samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd4_clk: sd4-clk {
 			samsung,pins = "gpk0-0";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd4_cmd: sd4-cmd {
 			samsung,pins = "gpk0-1";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd4_cd: sd4-cd {
 			samsung,pins = "gpk0-2";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd4_bus1: sd4-bus-width1 {
 			samsung,pins = "gpk0-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd4_bus4: sd4-bus-width4 {
 			samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd4_bus8: sd4-bus-width8 {
 			samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd1_clk: sd1-clk {
 			samsung,pins = "gpk1-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd1_cmd: sd1-cmd {
 			samsung,pins = "gpk1-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd1_cd: sd1-cd {
 			samsung,pins = "gpk1-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd1_bus1: sd1-bus-width1 {
 			samsung,pins = "gpk1-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd1_bus4: sd1-bus-width4 {
 			samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd2_clk: sd2-clk {
 			samsung,pins = "gpk2-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd2_cmd: sd2-cmd {
 			samsung,pins = "gpk2-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd2_cd: sd2-cd {
 			samsung,pins = "gpk2-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd2_bus1: sd2-bus-width1 {
 			samsung,pins = "gpk2-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd2_bus4: sd2-bus-width4 {
 			samsung,pins = "gpk2-3", "gpk2-4", "gpk2-5", "gpk2-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd2_bus8: sd2-bus-width8 {
 			samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd3_clk: sd3-clk {
 			samsung,pins = "gpk3-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd3_cmd: sd3-cmd {
 			samsung,pins = "gpk3-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd3_cd: sd3-cd {
 			samsung,pins = "gpk3-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd3_bus1: sd3-bus-width1 {
 			samsung,pins = "gpk3-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd3_bus4: sd3-bus-width4 {
 			samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		cam_port_b_io: cam-port-b-io {
 			samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3",
 					"gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7",
 					"gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		cam_port_b_clk_active: cam-port-b-clk-active {
 			samsung,pins = "gpm2-2";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		cam_port_b_clk_idle: cam-port-b-clk-idle {
 			samsung,pins = "gpm2-2";
-			samsung,pin-function = <0>;
-			samsung,pin-pud = <1>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		eint0: ext-int0 {
 			samsung,pins = "gpx0-0";
-			samsung,pin-function = <0xf>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		eint8: ext-int8 {
 			samsung,pins = "gpx1-0";
-			samsung,pin-function = <0xf>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		eint15: ext-int15 {
 			samsung,pins = "gpx1-7";
-			samsung,pin-function = <0xf>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		eint16: ext-int16 {
 			samsung,pins = "gpx2-0";
-			samsung,pin-function = <0xf>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		eint31: ext-int31 {
 			samsung,pins = "gpx3-7";
-			samsung,pin-function = <0xf>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		fimc_is_i2c0: fimc-is-i2c0 {
 			samsung,pins = "gpm4-0", "gpm4-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		fimc_is_i2c1: fimc-is-i2c1 {
 			samsung,pins = "gpm4-2", "gpm4-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		fimc_is_uart: fimc-is-uart {
 			samsung,pins = "gpm3-5", "gpm3-7";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		hdmi_cec: hdmi-cec {
 			samsung,pins = "gpx3-6";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 	};
 
@@ -906,17 +899,17 @@
 		i2s0_bus: i2s0-bus {
 			samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
 					"gpz-4", "gpz-5", "gpz-6";
-			samsung,pin-function = <0x2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		pcm0_bus: pcm0-bus {
 			samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
 					"gpz-4";
-			samsung,pin-function = <0x3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 	};
 
@@ -971,9 +964,9 @@
 					"gpv3-0", "gpv3-1", "gpv3-2", "gpv3-3",
 					"gpv3-4", "gpv3-5", "gpv3-6", "gpv3-7",
 					"gpv4-0", "gpv4-1";
-			samsung,pin-function = <0x2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi
index c452499..3394bdc 100644
--- a/arch/arm/boot/dts/exynos4x12.dtsi
+++ b/arch/arm/boot/dts/exynos4x12.dtsi
@@ -157,7 +157,9 @@
 				 <&clock CLK_MOUT_MPLL_USER_T>,
 				 <&clock CLK_FIMC_ISP>, <&clock CLK_FIMC_DRC>,
 				 <&clock CLK_FIMC_FD>, <&clock CLK_MCUISP>,
-				 <&clock CLK_DIV_ISP0>,<&clock CLK_DIV_ISP1>,
+				 <&clock CLK_GICISP>, <&clock CLK_MCUCTL_ISP>,
+				 <&clock CLK_PWM_ISP>,
+				 <&clock CLK_DIV_ISP0>, <&clock CLK_DIV_ISP1>,
 				 <&clock CLK_DIV_MCUISP0>,
 				 <&clock CLK_DIV_MCUISP1>,
 				 <&clock CLK_UART_ISP_SCLK>,
@@ -167,6 +169,7 @@
 			clock-names = "lite0", "lite1", "ppmuispx",
 				      "ppmuispmx", "mpll", "isp",
 				      "drc", "fd", "mcuisp",
+				      "gicisp", "mcuctl_isp", "pwm_isp",
 				      "ispdiv0", "ispdiv1", "mcuispdiv0",
 				      "mcuispdiv1", "uart", "aclk200",
 				      "div_aclk200", "aclk400mcuisp",
diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi
index cab9178..8f06609 100644
--- a/arch/arm/boot/dts/exynos5.dtsi
+++ b/arch/arm/boot/dts/exynos5.dtsi
@@ -13,11 +13,12 @@
  * published by the Free Software Foundation.
  */
 
-#include "skeleton.dtsi"
 #include "exynos-syscon-restart.dtsi"
 
 / {
 	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
 
 	aliases {
 		i2c0 = &i2c_0;
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index ea70603..6098dacd 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -20,7 +20,8 @@
 	model = "Insignal Arndale evaluation board based on EXYNOS5250";
 	compatible = "insignal,arndale", "samsung,exynos5250", "samsung,exynos5";
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg = <0x40000000 0x80000000>;
 	};
 
@@ -152,7 +153,7 @@
 };
 
 &hdmi {
-	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_LOW>;
+	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_LOW>;
 	vdd_osc-supply = <&ldo10_reg>;
 	vdd_pll-supply = <&ldo8_reg>;
 	vdd-supply = <&ldo8_reg>;
diff --git a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
index 880917e..2f6ab32 100644
--- a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
@@ -12,6 +12,8 @@
  * published by the Free Software Foundation.
 */
 
+#include <dt-bindings/pinctrl/samsung.h>
+
 &pinctrl_0 {
 	gpa0: gpa0 {
 		gpio-controller;
@@ -200,392 +202,392 @@
 
 	uart0_data: uart0-data {
 		samsung,pins = "gpa0-0", "gpa0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	uart0_fctl: uart0-fctl {
 		samsung,pins = "gpa0-2", "gpa0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c2_bus: i2c2-bus {
 		samsung,pins = "gpa0-6", "gpa0-7";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c2_hs_bus: i2c2-hs-bus {
 		samsung,pins = "gpa0-6", "gpa0-7";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	uart2_data: uart2-data {
 		samsung,pins = "gpa1-0", "gpa1-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	uart2_fctl: uart2-fctl {
 		samsung,pins = "gpa1-2", "gpa1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c3_bus: i2c3-bus {
 		samsung,pins = "gpa1-2", "gpa1-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c3_hs_bus: i2c3-hs-bus {
 		samsung,pins = "gpa1-2", "gpa1-3";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	uart3_data: uart3-data {
 		samsung,pins = "gpa1-4", "gpa1-4";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	spi0_bus: spi0-bus {
 		samsung,pins = "gpa2-0", "gpa2-2", "gpa2-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c4_bus: i2c4-bus {
 		samsung,pins = "gpa2-0", "gpa2-1";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c5_bus: i2c5-bus {
 		samsung,pins = "gpa2-2", "gpa2-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	spi1_bus: spi1-bus {
 		samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2s1_bus: i2s1-bus {
 		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
 			       "gpb0-4";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	pcm1_bus: pcm1-bus {
 		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
 			       "gpb0-4";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	ac97_bus: ac97-bus {
 		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
 			       "gpb0-4";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2s2_bus: i2s2-bus {
 		samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
 			       "gpb1-4";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	pcm2_bus: pcm2-bus {
 		samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
 			       "gpb1-4";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	spdif_bus: spdif-bus {
 		samsung,pins = "gpb1-0", "gpb1-1";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	spi2_bus: spi2-bus {
 		samsung,pins = "gpb1-1", "gpb1-3", "gpb1-4";
-		samsung,pin-function = <5>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c6_bus: i2c6-bus {
 		samsung,pins = "gpb1-3", "gpb1-4";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	pwm0_out: pwm0-out {
 		samsung,pins = "gpb2-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	pwm1_out: pwm1-out {
 		samsung,pins = "gpb2-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	pwm2_out: pwm2-out {
 		samsung,pins = "gpb2-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	pwm3_out: pwm3-out {
 		samsung,pins = "gpb2-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c7_bus: i2c7-bus {
 		samsung,pins = "gpb2-2", "gpb2-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c0_bus: i2c0-bus {
 		samsung,pins = "gpb3-0", "gpb3-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c1_bus: i2c1-bus {
 		samsung,pins = "gpb3-2", "gpb3-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c0_hs_bus: i2c0-hs-bus {
 		samsung,pins = "gpb3-0", "gpb3-1";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c1_hs_bus: i2c1-hs-bus {
 		samsung,pins = "gpb3-2", "gpb3-3";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	sd0_clk: sd0-clk {
 		samsung,pins = "gpc0-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd0_cmd: sd0-cmd {
 		samsung,pins = "gpc0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd0_cd: sd0-cd {
 		samsung,pins = "gpc0-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd0_bus1: sd0-bus-width1 {
 		samsung,pins = "gpc0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd0_bus4: sd0-bus-width4 {
 		samsung,pins = "gpc0-3", "gpc0-4", "gpc0-5", "gpc0-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd0_bus8: sd0-bus-width8 {
 		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd1_clk: sd1-clk {
 		samsung,pins = "gpc2-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd1_cmd: sd1-cmd {
 		samsung,pins = "gpc2-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd1_cd: sd1-cd {
 		samsung,pins = "gpc2-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd1_bus1: sd1-bus-width1 {
 		samsung,pins = "gpc2-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd1_bus4: sd1-bus-width4 {
 		samsung,pins = "gpc2-3", "gpc2-4", "gpc2-5", "gpc2-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd2_clk: sd2-clk {
 		samsung,pins = "gpc3-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd2_cmd: sd2-cmd {
 		samsung,pins = "gpc3-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd2_cd: sd2-cd {
 		samsung,pins = "gpc3-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd2_bus1: sd2-bus-width1 {
 		samsung,pins = "gpc3-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd2_bus4: sd2-bus-width4 {
 		samsung,pins = "gpc3-3", "gpc3-4", "gpc3-5", "gpc3-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd2_bus8: sd2-bus-width8 {
 		samsung,pins = "gpc4-3", "gpc4-4", "gpc4-5", "gpc4-6";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd3_clk: sd3-clk {
 		samsung,pins = "gpc4-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd3_cmd: sd3-cmd {
 		samsung,pins = "gpc4-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd3_cd: sd3-cd {
 		samsung,pins = "gpc4-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd3_bus1: sd3-bus-width1 {
 		samsung,pins = "gpc4-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd3_bus4: sd3-bus-width4 {
 		samsung,pins = "gpc4-3", "gpc4-4", "gpc4-5", "gpc4-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	uart1_data: uart1-data {
 		samsung,pins = "gpd0-0", "gpd0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	uart1_fctl: uart1-fctl {
 		samsung,pins = "gpd0-2", "gpd0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	dp_hpd: dp_hpd {
 		samsung,pins = "gpx0-7";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
 
@@ -666,52 +668,52 @@
 		samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
 			       "gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
 			       "gpe1-0", "gpe1-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	cam_gpio_b: cam-gpio-b {
 		samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3",
 			       "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	cam_i2c2_bus: cam-i2c2-bus {
 		samsung,pins = "gpe0-6", "gpe1-0";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	cam_spi1_bus: cam-spi1-bus {
 		samsung,pins = "gpe0-4", "gpe0-5", "gpf0-2", "gpf0-3";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	cam_i2c1_bus: cam-i2c1-bus {
 		samsung,pins = "gpf0-2", "gpf0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	cam_i2c0_bus: cam-i2c0-bus {
 		samsung,pins = "gpf0-0", "gpf0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	cam_spi0_bus: cam-spi0-bus {
 		samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	cam_bayrgb_bus: cam-bayrgb-bus {
@@ -720,18 +722,18 @@
 			       "gpg1-0", "gpg1-1", "gpg1-2", "gpg1-3",
 			       "gpg1-4", "gpg1-5", "gpg1-6", "gpg1-7",
 			       "gpg2-0", "gpg2-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	cam_port_a: cam-port-a {
 		samsung,pins = "gph0-0", "gph0-1", "gph0-2", "gph0-3",
 			       "gph1-0", "gph1-1", "gph1-2", "gph1-3",
 			       "gph1-4", "gph1-5", "gph1-6", "gph1-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
 
@@ -781,9 +783,9 @@
 			       "gpv0-4", "gpv0-5", "gpv0-6", "gpv0-7",
 			       "gpv1-0", "gpv1-1", "gpv1-2", "gpv1-3",
 			       "gpv1-4", "gpv1-5", "gpv1-6", "gpv1-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	c2c_txd: c2c-txd {
@@ -791,9 +793,9 @@
 			       "gpv2-4", "gpv2-5", "gpv2-6", "gpv2-7",
 			       "gpv3-0", "gpv3-1", "gpv3-2", "gpv3-3",
 			       "gpv3-4", "gpv3-5", "gpv3-6", "gpv3-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
 
@@ -809,8 +811,8 @@
 	i2s0_bus: i2s0-bus {
 		samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
 				"gpz-4", "gpz-5", "gpz-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index 381af13..a97a785 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -22,7 +22,8 @@
 	aliases {
 	};
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg = <0x40000000 0x80000000>;
 	};
 
@@ -116,7 +117,7 @@
 };
 
 &hdmi {
-	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
 };
 
 &i2c_0 {
@@ -416,8 +417,8 @@
 &pinctrl_0 {
 	max77686_irq: max77686-irq {
 		samsung,pins = "gpx3-2";
-		samsung,pin-function = <0xf>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
diff --git a/arch/arm/boot/dts/exynos5250-snow-common.dtsi b/arch/arm/boot/dts/exynos5250-snow-common.dtsi
index fadbea7..d5d5191 100644
--- a/arch/arm/boot/dts/exynos5250-snow-common.dtsi
+++ b/arch/arm/boot/dts/exynos5250-snow-common.dtsi
@@ -19,7 +19,8 @@
 		i2c104 = &i2c_104;
 	};
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg = <0x40000000 0x80000000>;
 	};
 
@@ -260,7 +261,7 @@
 };
 
 &hdmi {
-	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&hdmi_hpd_irq>;
 	phy = <&hdmiphy>;
@@ -440,7 +441,7 @@
  * double-pulling gets us out of spec in some cases.
  */
 &i2c2_bus {
-	samsung,pin-pud = <0>;
+	samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 };
 
 &i2c_2 {
@@ -572,81 +573,81 @@
 &pinctrl_0 {
 	wifi_en: wifi-en {
 		samsung,pins = "gpx0-1";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	wifi_rst: wifi-rst {
 		samsung,pins = "gpx0-2";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	power_key_irq: power-key-irq {
 		samsung,pins = "gpx1-3";
-		samsung,pin-function = <0xf>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	ec_irq: ec-irq {
 		samsung,pins = "gpx1-6";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	tps65090_irq: tps65090-irq {
 		samsung,pins = "gpx2-6";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	usb3_vbus_en: usb3-vbus-en {
 		samsung,pins = "gpx2-7";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	max77686_irq: max77686-irq {
 		samsung,pins = "gpx3-2";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	lid_irq: lid-irq {
 		samsung,pins = "gpx3-5";
-		samsung,pin-function = <0xf>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	hdmi_hpd_irq: hdmi-hpd-irq {
 		samsung,pins = "gpx3-7";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <1>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
 
 &pinctrl_1 {
 	arb_their_claim: arb-their-claim {
 		samsung,pins = "gpe0-4";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	arb_our_claim: arb-our-claim {
 		samsung,pins = "gpf0-3";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
 
@@ -657,16 +658,16 @@
 };
 
 &sd3_bus4 {
-	samsung,pin-drv = <0>;
+	samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 };
 
 &sd3_clk {
-	samsung,pin-drv = <0>;
+	samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 };
 
 &sd3_cmd {
-	samsung,pin-pud = <3>;
-	samsung,pin-drv = <0>;
+	samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+	samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 };
 
 &spi_1 {
diff --git a/arch/arm/boot/dts/exynos5250-snow-rev5.dts b/arch/arm/boot/dts/exynos5250-snow-rev5.dts
index f811dc8..90560c3 100644
--- a/arch/arm/boot/dts/exynos5250-snow-rev5.dts
+++ b/arch/arm/boot/dts/exynos5250-snow-rev5.dts
@@ -40,8 +40,8 @@
 &pinctrl_0 {
 	max98090_irq: max98090-irq {
 		samsung,pins = "gpx0-4";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
index 995c7ce..df48f2c 100644
--- a/arch/arm/boot/dts/exynos5250-snow.dts
+++ b/arch/arm/boot/dts/exynos5250-snow.dts
@@ -36,8 +36,8 @@
 &pinctrl_0 {
 	max98095_en: max98095-en {
 		samsung,pins = "gpx1-7";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts
index 44f4292..4d7bdb7 100644
--- a/arch/arm/boot/dts/exynos5250-spring.dts
+++ b/arch/arm/boot/dts/exynos5250-spring.dts
@@ -20,7 +20,8 @@
 	model = "Google Spring";
 	compatible = "google,spring", "samsung,exynos5250", "samsung,exynos5";
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg = <0x40000000 0x80000000>;
 	};
 
@@ -91,7 +92,7 @@
 };
 
 &hdmi {
-	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&hdmi_hpd_irq>;
 	phy = <&hdmiphy>;
@@ -357,7 +358,7 @@
  * double-pulling gets us out of spec in some cases.
  */
 &i2c2_bus {
-	samsung,pin-pud = <0>;
+	samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 };
 
 &i2c_2 {
@@ -460,92 +461,92 @@
 &pinctrl_0 {
 	s5m8767_dvs: s5m8767-dvs {
 		samsung,pins = "gpd1-0", "gpd1-1", "gpd1-2";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <1>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	dp_hpd_gpio: dp-hpd-gpio {
 		samsung,pins = "gpc3-0";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	trackpad_irq: trackpad-irq {
 		samsung,pins = "gpx1-2";
-		samsung,pin-function = <0xf>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	power_key_irq: power-key-irq {
 		samsung,pins = "gpx1-3";
-		samsung,pin-function = <0xf>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	ec_irq: ec-irq {
 		samsung,pins = "gpx1-6";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	s5m8767_ds: s5m8767-ds {
 		samsung,pins = "gpx2-3", "gpx2-4", "gpx2-5";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <1>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	s5m8767_irq: s5m8767-irq {
 		samsung,pins = "gpx3-2";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	lid_irq: lid-irq {
 		samsung,pins = "gpx3-5";
-		samsung,pin-function = <0xf>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	hdmi_hpd_irq: hdmi-hpd-irq {
 		samsung,pins = "gpx3-7";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <1>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
 
 &pinctrl_1 {
 	hsic_reset: hsic-reset {
 		samsung,pins = "gpe1-0";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
 
 &sd1_bus4 {
-	samsung,pin-drv = <0>;
+	samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 };
 
 &sd1_cd {
-	samsung,pin-drv = <0>;
+	samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 };
 
 &sd1_clk {
-	samsung,pin-drv = <0>;
+	samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 };
 
 &sd1_cmd {
-	samsung,pin-pud = <3>;
-	samsung,pin-drv = <0>;
+	samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+	samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 };
 
 &spi_1 {
diff --git a/arch/arm/boot/dts/exynos5260-pinctrl.dtsi b/arch/arm/boot/dts/exynos5260-pinctrl.dtsi
index f6ee55e..1b911a2 100644
--- a/arch/arm/boot/dts/exynos5260-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5260-pinctrl.dtsi
@@ -12,9 +12,7 @@
  * published by the Free Software Foundation.
 */
 
-#define PIN_PULL_NONE	0
-#define PIN_PULL_DOWN	1
-#define PIN_PULL_UP	3
+#include <dt-bindings/pinctrl/samsung.h>
 
 &pinctrl_0 {
 	gpa0: gpa0 {
@@ -187,217 +185,217 @@
 
 	uart0_data: uart0-data {
 		samsung,pins = "gpa0-0", "gpa0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	uart0_fctl: uart0-fctl {
 		samsung,pins = "gpa0-2", "gpa0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	uart1_data: uart1-data {
 		samsung,pins = "gpa1-0", "gpa1-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	uart1_fctl: uart1-fctl {
 		samsung,pins = "gpa1-2", "gpa1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	uart2_data: uart2-data {
 		samsung,pins = "gpa1-4", "gpa1-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	spi0_bus: spi0-bus {
 		samsung,pins = "gpa2-0", "gpa2-2", "gpa2-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	spi1_bus: spi1-bus {
 		samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	usb3_vbus0_en: usb3-vbus0-en {
 		samsung,pins = "gpa2-4";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	i2s1_bus: i2s1-bus {
 		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
 				"gpb0-4";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	pcm1_bus: pcm1-bus {
 		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
 				"gpb0-4";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	spdif1_bus: spdif1-bus {
 		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	spi2_bus: spi2-bus {
 		samsung,pins = "gpb1-0", "gpb1-2", "gpb1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	i2c0_hs_bus: i2c0-hs-bus {
 		samsung,pins = "gpb3-0", "gpb3-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	i2c1_hs_bus: i2c1-hs-bus {
 		samsung,pins = "gpb3-2", "gpb3-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	i2c2_hs_bus: i2c2-hs-bus {
 		samsung,pins = "gpb3-4", "gpb3-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	i2c3_hs_bus: i2c3-hs-bus {
 		samsung,pins = "gpb3-6", "gpb3-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	i2c4_bus: i2c4-bus {
 		samsung,pins = "gpb4-0", "gpb4-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	i2c5_bus: i2c5-bus {
 		samsung,pins = "gpb4-2", "gpb4-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	i2c6_bus: i2c6-bus {
 		samsung,pins = "gpb4-4", "gpb4-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	i2c7_bus: i2c7-bus {
 		samsung,pins = "gpb4-6", "gpb4-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	i2c8_bus: i2c8-bus {
 		samsung,pins = "gpb5-0", "gpb5-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	i2c9_bus: i2c9-bus {
 		samsung,pins = "gpb5-2", "gpb5-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	i2c10_bus: i2c10-bus {
 		samsung,pins = "gpb5-4", "gpb5-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	i2c11_bus: i2c11-bus {
 		samsung,pins = "gpb5-6", "gpb5-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	cam_gpio_a: cam-gpio-a {
 		samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
 			"gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
 			"gpe1-0", "gpe1-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	cam_gpio_b: cam-gpio-b {
 		samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3",
 			"gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	cam_i2c1_bus: cam-i2c1-bus {
 		samsung,pins = "gpf0-2", "gpf0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	cam_i2c0_bus: cam-i2c0-bus {
 		samsung,pins = "gpf0-0", "gpf0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	cam_spi0_bus: cam-spi0-bus {
 		samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	cam_spi1_bus: cam-spi1-bus {
 		samsung,pins = "gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 };
 
@@ -444,114 +442,114 @@
 
 	sd0_clk: sd0-clk {
 		samsung,pins = "gpc0-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
 	sd0_cmd: sd0-cmd {
 		samsung,pins = "gpc0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
 	sd0_bus1: sd0-bus-width1 {
 		samsung,pins = "gpc0-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
 	sd0_bus4: sd0-bus-width4 {
 		samsung,pins = "gpc0-3", "gpc0-4", "gpc0-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
 	sd0_bus8: sd0-bus-width8 {
 		samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", "gpc3-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
 	sd0_rdqs: sd0-rdqs {
 		samsung,pins = "gpc0-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
 	sd1_clk: sd1-clk {
 		samsung,pins = "gpc1-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
 	sd1_cmd: sd1-cmd {
 		samsung,pins = "gpc1-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
 	sd1_bus1: sd1-bus-width1 {
 		samsung,pins = "gpc1-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
 	sd1_bus4: sd1-bus-width4 {
 		samsung,pins = "gpc1-3", "gpc1-4", "gpc1-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
 	sd1_bus8: sd1-bus-width8 {
 		samsung,pins = "gpc4-0", "gpc4-1", "gpc4-2", "gpc4-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
 	sd2_clk: sd2-clk {
 		samsung,pins = "gpc2-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
 	sd2_cmd: sd2-cmd {
 		samsung,pins = "gpc2-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
 	sd2_cd: sd2-cd {
 		samsung,pins = "gpc2-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
 	sd2_bus1: sd2-bus-width1 {
 		samsung,pins = "gpc2-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
 	sd2_bus4: sd2-bus-width4 {
 		samsung,pins = "gpc2-4", "gpc2-5", "gpc2-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/exynos5260-xyref5260.dts b/arch/arm/boot/dts/exynos5260-xyref5260.dts
index 3daef94..d0cc300 100644
--- a/arch/arm/boot/dts/exynos5260-xyref5260.dts
+++ b/arch/arm/boot/dts/exynos5260-xyref5260.dts
@@ -16,7 +16,8 @@
 	model = "SAMSUNG XYREF5260 board based on EXYNOS5260";
 	compatible = "samsung,xyref5260", "samsung,exynos5260", "samsung,exynos5";
 
-	memory {
+	memory@20000000 {
+		device_type = "memory";
 		reg = <0x20000000 0x80000000>;
 	};
 
@@ -42,9 +43,9 @@
 &pinctrl_0 {
 	hdmi_hpd_irq: hdmi-hpd-irq {
 		samsung,pins = "gpx3-7";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <1>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/exynos5260.dtsi b/arch/arm/boot/dts/exynos5260.dtsi
index 36da38e..a86a489 100644
--- a/arch/arm/boot/dts/exynos5260.dtsi
+++ b/arch/arm/boot/dts/exynos5260.dtsi
@@ -9,13 +9,13 @@
  * published by the Free Software Foundation.
 */
 
-#include "skeleton.dtsi"
-
 #include <dt-bindings/clock/exynos5260-clk.h>
 
 / {
 	compatible = "samsung,exynos5260", "samsung,exynos5";
 	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
 
 	aliases {
 		pinctrl0 = &pinctrl_0;
diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts
index f6d1352..3c271cb 100644
--- a/arch/arm/boot/dts/exynos5410-odroidxu.dts
+++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts
@@ -21,12 +21,13 @@
 	model = "Hardkernel Odroid XU";
 	compatible = "hardkernel,odroid-xu", "samsung,exynos5410", "samsung,exynos5";
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg = <0x40000000 0x7ea00000>;
 	};
 
 	chosen {
-		linux,stdout-path = &serial_2;
+		stdout-path = "serial2:115200n8";
 	};
 
 	emmc_pwrseq: pwrseq {
@@ -473,38 +474,38 @@
 &pinctrl_0 {
 	emmc_nrst_pin: emmc-nrst {
 		samsung,pins = "gpd1-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	pmic_dvs_3: pmic-dvs-3 {
 		samsung,pins = "gpx0-0";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	pmic_dvs_2: pmic-dvs-2 {
 		samsung,pins = "gpx0-1";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	pmic_dvs_1: pmic-dvs-1 {
 		samsung,pins = "gpx0-2";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 		samsung,pin-val = <1>;
 	};
 
 	max77802_irq: max77802-irq {
 		samsung,pins = "gpx0-4";
-		samsung,pin-function = <0xf>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/exynos5410-pinctrl.dtsi b/arch/arm/boot/dts/exynos5410-pinctrl.dtsi
index b58a0f2..a083d23 100644
--- a/arch/arm/boot/dts/exynos5410-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5410-pinctrl.dtsi
@@ -9,6 +9,8 @@
  * published by the Free Software Foundation.
  */
 
+#include <dt-bindings/pinctrl/samsung.h>
+
 &pinctrl_0 {
 	gpa0: gpa0 {
 		gpio-controller;
@@ -280,212 +282,212 @@
 
 	uart0_data: uart0-data {
 		samsung,pins = "gpa0-0", "gpa0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	uart0_fctl: uart0-fctl {
 		samsung,pins = "gpa0-2", "gpa0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	uart1_data: uart1-data {
 		samsung,pins = "gpa0-4", "gpa0-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	uart1_fctl: uart1-fctl {
 		samsung,pins = "gpa0-6", "gpa0-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	i2c2_bus: i2c2-bus {
 		samsung,pins = "gpa0-6", "gpa0-7";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	uart2_data: uart2-data {
 		samsung,pins = "gpa1-0", "gpa1-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	uart2_fctl: uart2-fctl {
 		samsung,pins = "gpa1-2", "gpa1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	i2c3_bus: i2c3-bus {
 		samsung,pins = "gpa1-2", "gpa1-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	uart3_data: uart3-data {
 		samsung,pins = "gpa1-4", "gpa1-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	i2c4_hs_bus: i2c4-hs-bus {
 		samsung,pins = "gpa2-0", "gpa2-1";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	i2c5_hs_bus: i2c5-hs-bus {
 		samsung,pins = "gpa2-2", "gpa2-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	i2c6_hs_bus: i2c6-hs-bus {
 		samsung,pins = "gpb1-3", "gpb1-4";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	pwm0_out: pwm0-out {
 		samsung,pins = "gpb2-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	pwm1_out: pwm1-out {
 		samsung,pins = "gpb2-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	pwm2_out: pwm2-out {
 		samsung,pins = "gpb2-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	pwm3_out: pwm3-out {
 		samsung,pins = "gpb2-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	i2c7_hs_bus: i2c7-hs-bus {
 		samsung,pins = "gpb2-2", "gpb2-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	i2c0_bus: i2c0-bus {
 		samsung,pins = "gpb3-0", "gpb3-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	i2c1_bus: i2c1-bus {
 		samsung,pins = "gpb3-2", "gpb3-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	sd0_clk: sd0-clk {
 		samsung,pins = "gpc0-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
 	sd0_cmd: sd0-cmd {
 		samsung,pins = "gpc0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
 	sd0_cd: sd0-cd {
 		samsung,pins = "gpc0-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
 	sd0_bus1: sd0-bus-width1 {
 		samsung,pins = "gpc0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
 	sd0_bus4: sd0-bus-width4 {
 		samsung,pins = "gpc0-4", "gpc0-5", "gpc0-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
 	sd2_clk: sd2-clk {
 		samsung,pins = "gpc2-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
 	sd2_cmd: sd2-cmd {
 		samsung,pins = "gpc2-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
 	sd2_cd: sd2-cd {
 		samsung,pins = "gpc2-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
 	sd2_bus1: sd2-bus-width1 {
 		samsung,pins = "gpc2-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
 	sd2_bus4: sd2-bus-width4 {
 		samsung,pins = "gpc2-4", "gpc2-5", "gpc2-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
 	sd0_bus8: sd0-bus-width8 {
 		samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", "gpc3-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/exynos5410-smdk5410.dts b/arch/arm/boot/dts/exynos5410-smdk5410.dts
index 777fcf2..6cc74d9 100644
--- a/arch/arm/boot/dts/exynos5410-smdk5410.dts
+++ b/arch/arm/boot/dts/exynos5410-smdk5410.dts
@@ -16,7 +16,8 @@
 	model = "Samsung SMDK5410 board based on EXYNOS5410";
 	compatible = "samsung,smdk5410", "samsung,exynos5410", "samsung,exynos5";
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg = <0x40000000 0x80000000>;
 	};
 
@@ -66,8 +67,8 @@
 	srom_ctl: srom-ctl {
 		samsung,pins = "gpy0-3", "gpy0-4", "gpy0-5",
 			       "gpy1-0", "gpy1-1", "gpy1-2", "gpy1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	srom_ebi: srom-ebi {
@@ -77,9 +78,9 @@
 			       "gpy5-4", "gpy5-5", "gpy5-6", "gpy5-7",
 			       "gpy6-0", "gpy6-1", "gpy6-2", "gpy6-3",
 			       "gpy6-4", "gpy6-5", "gpy6-6", "gpy6-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
index 39a3b81..9cc83c5 100644
--- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts
+++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
@@ -22,7 +22,8 @@
 	model = "Insignal Arndale Octa evaluation board based on EXYNOS5420";
 	compatible = "insignal,arndale-octa", "samsung,exynos5420", "samsung,exynos5";
 
-	memory {
+	memory@20000000 {
+		device_type = "memory";
 		reg = <0x20000000 0x80000000>;
 	};
 
@@ -70,6 +71,15 @@
 	status = "disabled";
 };
 
+&hdmi {
+	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	vdd_osc-supply = <&ldo7_reg>;
+	vdd_pll-supply = <&ldo6_reg>;
+	vdd-supply = <&ldo6_reg>;
+	ddc = <&i2c_2>;
+	status = "okay";
+};
+
 &hsi2c_4 {
 	status = "okay";
 
@@ -347,6 +357,10 @@
 	};
 };
 
+&i2c_2 {
+	status = "okay";
+};
+
 &mmc_0 {
 	status = "okay";
 	broken-cd;
@@ -378,9 +392,9 @@
 &pinctrl_0 {
 	s2mps11_irq: s2mps11-irq {
 		samsung,pins = "gpx3-2";
-		samsung,pin-function = <0xf>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
index fe4e091..ec4a00f 100644
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -79,7 +79,8 @@
 		};
 	};
 
-	memory {
+	memory@20000000 {
+		device_type = "memory";
 		reg = <0x20000000 0x80000000>;
 	};
 
@@ -179,7 +180,7 @@
 
 &hdmi {
 	status = "okay";
-	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&hdmi_hpd_irq>;
 	ddc = <&i2c_2>;
@@ -753,171 +754,171 @@
 
 	wifi_en: wifi-en {
 		samsung,pins = "gpx0-0";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	max98090_irq: max98090-irq {
 		samsung,pins = "gpx0-2";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	/* We need GPX0_6 to be low at sleep time; just keep it low always */
 	mask_tpm_reset: mask-tpm-reset {
 		samsung,pins = "gpx0-6";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 		samsung,pin-val = <0>;
 	};
 
 	tpm_irq: tpm-irq {
 		samsung,pins = "gpx1-0";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	trackpad_irq: trackpad-irq {
 		samsung,pins = "gpx1-1";
-		samsung,pin-function = <0xf>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	power_key_irq: power-key-irq {
 		samsung,pins = "gpx1-2";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	ec_irq: ec-irq {
 		samsung,pins = "gpx1-5";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	tps65090_irq: tps65090-irq {
 		samsung,pins = "gpx2-5";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	dp_hpd_gpio: dp_hpd_gpio {
 		samsung,pins = "gpx2-6";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	max77802_irq: max77802-irq {
 		samsung,pins = "gpx3-1";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	lid_irq: lid-irq {
 		samsung,pins = "gpx3-4";
-		samsung,pin-function = <0xf>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	hdmi_hpd_irq: hdmi-hpd-irq {
 		samsung,pins = "gpx3-7";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <1>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	pmic_dvs_1: pmic-dvs-1 {
 		samsung,pins = "gpy7-6";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 };
 
 &pinctrl_1 {
 	/* Adjust WiFi drive strengths lower for EMI */
 	sd1_clk: sd1-clk {
-		samsung,pin-drv = <2>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
 	};
 
 	sd1_cmd: sd1-cmd {
-		samsung,pin-drv = <2>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
 	};
 
 	sd1_bus1: sd1-bus-width1 {
-		samsung,pin-drv = <2>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
 	};
 
 	sd1_bus4: sd1-bus-width4 {
-		samsung,pin-drv = <2>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
 	};
 
 	sd1_bus8: sd1-bus-width8 {
-		samsung,pin-drv = <2>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
 	};
 };
 
 &pinctrl_2 {
 	pmic_dvs_2: pmic-dvs-2 {
 		samsung,pins = "gpj4-2";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	pmic_dvs_3: pmic-dvs-3 {
 		samsung,pins = "gpj4-3";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 };
 
 &pinctrl_3 {
 	/* Drive SPI lines at x2 for better integrity */
 	spi2-bus {
-		samsung,pin-drv = <2>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
 	};
 
 	/* Drive SPI chip select at x2 for better integrity */
 	ec_spi_cs: ec-spi-cs {
 		samsung,pins = "gpb1-2";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <2>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
 	};
 
 	usb300_vbus_en: usb300-vbus-en {
 		samsung,pins = "gph0-0";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	usb301_vbus_en: usb301-vbus-en {
 		samsung,pins = "gph0-1";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	pmic_selb: pmic-selb {
 		samsung,pins = "gph0-2", "gph0-3", "gph0-4", "gph0-5",
 			       "gph0-6";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
index 14beb7e..3924b4f 100644
--- a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
@@ -12,6 +12,8 @@
  * published by the Free Software Foundation.
 */
 
+#include <dt-bindings/pinctrl/samsung.h>
+
 &pinctrl_0 {
 	gpy7: gpy7 {
 		gpio-controller;
@@ -61,9 +63,9 @@
 
 	dp_hpd: dp_hpd {
 		samsung,pins = "gpx0-7";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 };
 
@@ -153,135 +155,135 @@
 
 	sd0_clk: sd0-clk {
 		samsung,pins = "gpc0-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
 	sd0_cmd: sd0-cmd {
 		samsung,pins = "gpc0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
 	sd0_cd: sd0-cd {
 		samsung,pins = "gpc0-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
 	sd0_bus1: sd0-bus-width1 {
 		samsung,pins = "gpc0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
 	sd0_bus4: sd0-bus-width4 {
 		samsung,pins = "gpc0-4", "gpc0-5", "gpc0-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
 	sd0_bus8: sd0-bus-width8 {
 		samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", "gpc3-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
 	sd0_rclk: sd0-rclk {
 		samsung,pins = "gpc0-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <1>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
 	sd1_clk: sd1-clk {
 		samsung,pins = "gpc1-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
 	sd1_cmd: sd1-cmd {
 		samsung,pins = "gpc1-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
 	sd1_cd: sd1-cd {
 		samsung,pins = "gpc1-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
 	sd1_int: sd1-int {
 		samsung,pins = "gpd1-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	sd1_bus1: sd1-bus-width1 {
 		samsung,pins = "gpc1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
 	sd1_bus4: sd1-bus-width4 {
 		samsung,pins = "gpc1-4", "gpc1-5", "gpc1-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
 	sd1_bus8: sd1-bus-width8 {
 		samsung,pins = "gpd1-4", "gpd1-5", "gpd1-6", "gpd1-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
 	sd2_clk: sd2-clk {
 		samsung,pins = "gpc2-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
 	sd2_cmd: sd2-cmd {
 		samsung,pins = "gpc2-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
 	sd2_cd: sd2-cd {
 		samsung,pins = "gpc2-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
 	sd2_bus1: sd2-bus-width1 {
 		samsung,pins = "gpc2-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
 	sd2_bus4: sd2-bus-width4 {
 		samsung,pins = "gpc2-4", "gpc2-5", "gpc2-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 };
 
@@ -354,52 +356,52 @@
 		samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
 			       "gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
 			       "gpe1-0", "gpe1-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	cam_gpio_b: cam-gpio-b {
 		samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3",
 			       "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	cam_i2c2_bus: cam-i2c2-bus {
 		samsung,pins = "gpf0-4", "gpf0-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	cam_spi1_bus: cam-spi1-bus {
 		samsung,pins = "gpe0-4", "gpe0-5", "gpf0-2", "gpf0-3";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	cam_i2c1_bus: cam-i2c1-bus {
 		samsung,pins = "gpf0-2", "gpf0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	cam_i2c0_bus: cam-i2c0-bus {
 		samsung,pins = "gpf0-0", "gpf0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	cam_spi0_bus: cam-spi0-bus {
 		samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	cam_bayrgb_bus: cam-bayrgb-bus {
@@ -408,9 +410,9 @@
 			       "gpg1-0", "gpg1-1", "gpg1-2", "gpg1-3",
 			       "gpg1-4", "gpg1-5", "gpg1-6", "gpg1-7",
 			       "gpg2-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 };
 
@@ -489,216 +491,216 @@
 
 	uart0_data: uart0-data {
 		samsung,pins = "gpa0-0", "gpa0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	uart0_fctl: uart0-fctl {
 		samsung,pins = "gpa0-2", "gpa0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	uart1_data: uart1-data {
 		samsung,pins = "gpa0-4", "gpa0-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	uart1_fctl: uart1-fctl {
 		samsung,pins = "gpa0-6", "gpa0-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	i2c2_bus: i2c2-bus {
 		samsung,pins = "gpa0-6", "gpa0-7";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	uart2_data: uart2-data {
 		samsung,pins = "gpa1-0", "gpa1-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	uart2_fctl: uart2-fctl {
 		samsung,pins = "gpa1-2", "gpa1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	i2c3_bus: i2c3-bus {
 		samsung,pins = "gpa1-2", "gpa1-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	uart3_data: uart3-data {
 		samsung,pins = "gpa1-4", "gpa1-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	spi0_bus: spi0-bus {
 		samsung,pins = "gpa2-0", "gpa2-1", "gpa2-2", "gpa2-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	spi1_bus: spi1-bus {
 		samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	i2c4_hs_bus: i2c4-hs-bus {
 		samsung,pins = "gpa2-0", "gpa2-1";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	i2c5_hs_bus: i2c5-hs-bus {
 		samsung,pins = "gpa2-2", "gpa2-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	i2s1_bus: i2s1-bus {
 		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
 			       "gpb0-4";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	pcm1_bus: pcm1-bus {
 		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
 			       "gpb0-4";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	i2s2_bus: i2s2-bus {
 		samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
 			       "gpb1-4";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	pcm2_bus: pcm2-bus {
 		samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
 			       "gpb1-4";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	spdif_bus: spdif-bus {
 		samsung,pins = "gpb1-0", "gpb1-1";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	spi2_bus: spi2-bus {
 		samsung,pins = "gpb1-1", "gpb1-3", "gpb1-4";
-		samsung,pin-function = <5>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	i2c6_hs_bus: i2c6-hs-bus {
 		samsung,pins = "gpb1-3", "gpb1-4";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	pwm0_out: pwm0-out {
 		samsung,pins = "gpb2-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	pwm1_out: pwm1-out {
 		samsung,pins = "gpb2-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	pwm2_out: pwm2-out {
 		samsung,pins = "gpb2-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	pwm3_out: pwm3-out {
 		samsung,pins = "gpb2-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	i2c7_hs_bus: i2c7-hs-bus {
 		samsung,pins = "gpb2-2", "gpb2-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	i2c0_bus: i2c0-bus {
 		samsung,pins = "gpb3-0", "gpb3-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	i2c1_bus: i2c1-bus {
 		samsung,pins = "gpb3-2", "gpb3-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	i2c8_hs_bus: i2c8-hs-bus {
 		samsung,pins = "gpb3-4", "gpb3-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	i2c9_hs_bus: i2c9-hs-bus {
 		samsung,pins = "gpb3-6", "gpb3-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	i2c10_hs_bus: i2c10-hs-bus {
 		samsung,pins = "gpb4-0", "gpb4-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 };
 
@@ -714,8 +716,8 @@
 	i2s0_bus: i2s0-bus {
 		samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
 				"gpz-4", "gpz-5", "gpz-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 };
diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts
index ed8f342..aaccd0d 100644
--- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
+++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
@@ -19,7 +19,8 @@
 	model = "Samsung SMDK5420 board based on EXYNOS5420";
 	compatible = "samsung,smdk5420", "samsung,exynos5420", "samsung,exynos5";
 
-	memory {
+	memory@20000000 {
+		device_type = "memory";
 		reg = <0x20000000 0x80000000>;
 	};
 
@@ -130,7 +131,7 @@
 
 &hdmi {
 	status = "okay";
-	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&hdmi_hpd_irq>;
 };
@@ -386,25 +387,25 @@
 &pinctrl_0 {
 	hdmi_hpd_irq: hdmi-hpd-irq {
 		samsung,pins = "gpx3-7";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <1>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 };
 
 &pinctrl_2 {
 	usb300_vbus_en: usb300-vbus-en {
 		samsung,pins = "gpg0-5";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	usb301_vbus_en: usb301-vbus-en {
 		samsung,pins = "gpg1-4";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
index d562530..246d298 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
@@ -21,12 +21,13 @@
 #include "exynos-mfc-reserved-memory.dtsi"
 
 / {
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg = <0x40000000 0x7EA00000>;
 	};
 
 	chosen {
-		linux,stdout-path = &serial_2;
+		stdout-path = "serial2:115200n8";
 	};
 
 	firmware@02073000 {
@@ -250,7 +251,7 @@
 
 &hdmi {
 	status = "okay";
-	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&hdmi_hpd_irq>;
 
@@ -548,25 +549,25 @@
 &pinctrl_0 {
 	hdmi_hpd_irq: hdmi-hpd-irq {
 		samsung,pins = "gpx3-7";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <1>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	s2mps11_irq: s2mps11-irq {
 		samsung,pins = "gpx0-4";
-		samsung,pin-function = <0xf>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 };
 
 &pinctrl_1 {
 	emmc_nrst_pin: emmc-nrst {
 		samsung,pins = "gpd1-0";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/exynos5440-sd5v1.dts b/arch/arm/boot/dts/exynos5440-sd5v1.dts
index a98501b..ad6f533b 100644
--- a/arch/arm/boot/dts/exynos5440-sd5v1.dts
+++ b/arch/arm/boot/dts/exynos5440-sd5v1.dts
@@ -20,6 +20,12 @@
 		bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel earlyprintk no_console_suspend mem=2048M@0x80000000 mem=6144M@0x100000000 console=ttySAC0,115200";
 	};
 
+	/* FIXME: set reg property with correct start address and size */
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0>;
+	};
+
 	fixed-rate-clocks {
 		xtal {
 			compatible = "samsung,clock-xtal";
diff --git a/arch/arm/boot/dts/exynos5440-ssdk5440.dts b/arch/arm/boot/dts/exynos5440-ssdk5440.dts
index 6a0d802..92bd2c6f 100644
--- a/arch/arm/boot/dts/exynos5440-ssdk5440.dts
+++ b/arch/arm/boot/dts/exynos5440-ssdk5440.dts
@@ -21,6 +21,12 @@
 		bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel earlyprintk no_console_suspend mem=2048M@0x80000000 mem=6144M@0x100000000 console=ttySAC0,115200";
 	};
 
+	/* FIXME: set reg property with correct start address and size */
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0>;
+	};
+
 	fixed-rate-clocks {
 		xtal {
 			compatible = "samsung,clock-xtal";
diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi
index fd17681..e6bffd1 100644
--- a/arch/arm/boot/dts/exynos5440.dtsi
+++ b/arch/arm/boot/dts/exynos5440.dtsi
@@ -10,12 +10,13 @@
 */
 
 #include <dt-bindings/clock/exynos5440.h>
-#include "skeleton.dtsi"
 
 / {
 	compatible = "samsung,exynos5440", "samsung,exynos5";
 
 	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
 
 	aliases {
 		serial0 = &serial_0;
diff --git a/arch/arm/boot/dts/exynos54xx.dtsi b/arch/arm/boot/dts/exynos54xx.dtsi
index 06a6049..9d31cdc 100644
--- a/arch/arm/boot/dts/exynos54xx.dtsi
+++ b/arch/arm/boot/dts/exynos54xx.dtsi
@@ -14,7 +14,6 @@
  * published by the Free Software Foundation.
  */
 
-#include "skeleton.dtsi"
 #include "exynos5.dtsi"
 
 / {
diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
index 5ec71e2..01f4668 100644
--- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
+++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
@@ -79,7 +79,8 @@
 
 	};
 
-	memory {
+	memory@20000000 {
+		device_type = "memory";
 		reg = <0x20000000 0x80000000>;
 	};
 
@@ -179,7 +180,7 @@
 
 &hdmi {
 	status = "okay";
-	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&hdmi_hpd_irq>;
 	ddc = <&i2c_2>;
@@ -722,171 +723,171 @@
 
 	wifi_en: wifi-en {
 		samsung,pins = "gpx0-0";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	max98091_irq: max98091-irq {
 		samsung,pins = "gpx0-2";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	/* We need GPX0_6 to be low at sleep time; just keep it low always */
 	mask_tpm_reset: mask-tpm-reset {
 		samsung,pins = "gpx0-6";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 		samsung,pin-val = <0>;
 	};
 
 	tpm_irq: tpm-irq {
 		samsung,pins = "gpx1-0";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	trackpad_irq: trackpad-irq {
 		samsung,pins = "gpx1-1";
-		samsung,pin-function = <0xf>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	power_key_irq: power-key-irq {
 		samsung,pins = "gpx1-2";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	ec_irq: ec-irq {
 		samsung,pins = "gpx1-5";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	tps65090_irq: tps65090-irq {
 		samsung,pins = "gpx2-5";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	dp_hpd_gpio: dp_hpd_gpio {
 		samsung,pins = "gpx2-6";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	max77802_irq: max77802-irq {
 		samsung,pins = "gpx3-1";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	lid_irq: lid-irq {
 		samsung,pins = "gpx3-4";
-		samsung,pin-function = <0xf>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	hdmi_hpd_irq: hdmi-hpd-irq {
 		samsung,pins = "gpx3-7";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <1>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	pmic_dvs_1: pmic-dvs-1 {
 		samsung,pins = "gpy7-6";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 };
 
 &pinctrl_1 {
 	/* Adjust WiFi drive strengths lower for EMI */
 	sd1_clk: sd1-clk {
-		samsung,pin-drv = <2>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
 	};
 
 	sd1_cmd: sd1-cmd {
-		samsung,pin-drv = <2>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
 	};
 
 	sd1_bus1: sd1-bus-width1 {
-		samsung,pin-drv = <2>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
 	};
 
 	sd1_bus4: sd1-bus-width4 {
-		samsung,pin-drv = <2>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
 	};
 
 	sd1_bus8: sd1-bus-width8 {
-		samsung,pin-drv = <2>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
 	};
 };
 
 &pinctrl_2 {
 	pmic_dvs_2: pmic-dvs-2 {
 		samsung,pins = "gpj4-2";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	pmic_dvs_3: pmic-dvs-3 {
 		samsung,pins = "gpj4-3";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 };
 
 &pinctrl_3 {
 	/* Drive SPI lines at x2 for better integrity */
 	spi2-bus {
-		samsung,pin-drv = <2>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
 	};
 
 	/* Drive SPI chip select at x2 for better integrity */
 	ec_spi_cs: ec-spi-cs {
 		samsung,pins = "gpb1-2";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <2>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
 	};
 
 	usb300_vbus_en: usb300-vbus-en {
 		samsung,pins = "gph0-0";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	usb301_vbus_en: usb301-vbus-en {
 		samsung,pins = "gph0-1";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	pmic_selb: pmic-selb {
 		samsung,pins = "gph0-2", "gph0-3", "gph0-4", "gph0-5",
 			       "gph0-6";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi
index 490b7b4..f812d58 100644
--- a/arch/arm/boot/dts/imx35.dtsi
+++ b/arch/arm/boot/dts/imx35.dtsi
@@ -309,6 +309,13 @@
 				status = "disabled";
 			};
 
+			iim@53ff0000 {
+				compatible = "fsl,imx35-iim";
+				reg = <0x53ff0000 0x4000>;
+				interrupts = <19>;
+				clocks = <&clks 80>;
+			};
+
 			usbotg: usb@53ff4000 {
 				compatible = "fsl,imx35-usb", "fsl,imx27-usb";
 				reg = <0x53ff4000 0x0200>;
diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi
index e245713..8fe8bee 100644
--- a/arch/arm/boot/dts/imx50.dtsi
+++ b/arch/arm/boot/dts/imx50.dtsi
@@ -227,6 +227,7 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 151 28>;
 			};
 
 			gpio2: gpio@53f88000 {
@@ -237,6 +238,10 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc  0 75 8>, <&iomuxc 8 100 8>,
+					      <&iomuxc 16 83 1>, <&iomuxc 17 85 1>,
+					      <&iomuxc 18 87 1>, <&iomuxc 19 84 1>,
+					      <&iomuxc 20 88 1>, <&iomuxc 21 86 1>;
 			};
 
 			gpio3: gpio@53f8c000 {
@@ -247,6 +252,7 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 108 32>;
 			};
 
 			gpio4: gpio@53f90000 {
@@ -257,6 +263,8 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc  0   8  8>, <&iomuxc 8 45 12>,
+					      <&iomuxc 20 140 11>;
 			};
 
 			wdog1: wdog@53f98000 {
@@ -346,6 +354,7 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 57 18>, <&iomuxc 18 89 11>;
 			};
 
 			gpio6: gpio@53fe0000 {
@@ -356,6 +365,7 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 27 18>, <&iomuxc 18 16 11>;
 			};
 
 			i2c3: i2c@53fec000 {
diff --git a/arch/arm/boot/dts/imx53-usbarmory.dts b/arch/arm/boot/dts/imx53-usbarmory.dts
new file mode 100644
index 0000000..6782d7f
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-usbarmory.dts
@@ -0,0 +1,224 @@
+/*
+ * USB armory MkI device tree file
+ * https://inversepath.com/usbarmory
+ *
+ * Copyright (C) 2015, Inverse Path
+ * Andrej Rosano <andrej@inversepath.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx53.dtsi"
+
+/ {
+	model = "Inverse Path USB armory";
+	compatible = "inversepath,imx53-usbarmory", "fsl,imx53";
+};
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory {
+		reg = <0x70000000 0x20000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led>;
+
+		user {
+			label = "LED";
+			gpios = <&gpio4 27 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+/*
+ * Not every i.MX53 P/N supports clock > 800MHz.
+ * As USB armory does not mount a specific P/N set a safe clock upper limit.
+ */
+&cpu0 {
+	operating-points = <
+		/* kHz */
+		166666  850000
+		400000  900000
+		800000 1050000
+	>;
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
+			MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
+			MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
+			MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
+			MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
+			MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
+		>;
+	};
+
+	pinctrl_i2c1_pmic: i2c1grp {
+		fsl,pins = <
+			MX53_PAD_EIM_D21__I2C1_SCL	0x80
+			MX53_PAD_EIM_D28__I2C1_SDA	0x80
+		>;
+	};
+
+	pinctrl_led: ledgrp {
+		fsl,pins = <
+			MX53_PAD_DISP0_DAT6__GPIO4_27 0x1e4
+		>;
+	};
+
+	/*
+	 * UART mode pin header configration
+	 * 3 - GPIO5[26], pull-down 100K
+	 * 4 - GPIO5[27], pull-down 100K
+	 * 5 - TX, pull-up 100K
+	 * 6 - RX, pull-up 100K
+	 * 7 - GPIO5[30], pull-down 100K
+	 */
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX53_PAD_CSI0_DAT8__GPIO5_26		0xc0
+			MX53_PAD_CSI0_DAT9__GPIO5_27		0xc0
+			MX53_PAD_CSI0_DAT10__UART1_TXD_MUX	0x1e4
+			MX53_PAD_CSI0_DAT11__UART1_RXD_MUX	0x1e4
+			MX53_PAD_CSI0_DAT12__GPIO5_30		0xc0
+		>;
+	};
+};
+
+&i2c1 {
+	pinctrl-0 = <&pinctrl_i2c1_pmic>;
+	status = "okay";
+
+	ltc3589: pmic@34 {
+		compatible = "lltc,ltc3589-2";
+		reg = <0x34>;
+
+		regulators {
+			sw1_reg: sw1 {
+				regulator-min-microvolt = <591930>;
+				regulator-max-microvolt = <1224671>;
+				lltc,fb-voltage-divider = <100000 158000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <704123>;
+				regulator-max-microvolt = <1456803>;
+				lltc,fb-voltage-divider = <180000 191000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3_reg: sw3 {
+				regulator-min-microvolt = <1341250>;
+				regulator-max-microvolt = <2775000>;
+				lltc,fb-voltage-divider = <270000 100000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			bb_out_reg: bb-out {
+				regulator-min-microvolt = <3387341>;
+				regulator-max-microvolt = <3387341>;
+				lltc,fb-voltage-divider = <511000 158000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1_reg: ldo1 {
+				regulator-min-microvolt = <1306329>;
+				regulator-max-microvolt = <1306329>;
+				lltc,fb-voltage-divider = <100000 158000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2_reg: ldo2 {
+				regulator-min-microvolt = <704123>;
+				regulator-max-microvolt = <1456806>;
+				lltc,fb-voltage-divider = <180000 191000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3_reg: ldo3 {
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-boot-on;
+			};
+
+			ldo4_reg: ldo4 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3200000>;
+			};
+		};
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index cd17037..0777b41 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -136,6 +136,14 @@
 			clock-names = "bus", "di0", "di1";
 			resets = <&src 2>;
 
+			ipu_csi0: port@0 {
+				reg = <0>;
+			};
+
+			ipu_csi1: port@1 {
+				reg = <1>;
+			};
+
 			ipu_di0: port@2 {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -217,6 +225,8 @@
 					clocks = <&clks IMX5_CLK_UART3_IPG_GATE>,
 					         <&clks IMX5_CLK_UART3_PER_GATE>;
 					clock-names = "ipg", "per";
+					dmas = <&sdma 42 4 0>, <&sdma 43 4 0>;
+					dma-names = "rx", "tx";
 					status = "disabled";
 				};
 
@@ -498,6 +508,8 @@
 				clocks = <&clks IMX5_CLK_UART1_IPG_GATE>,
 				         <&clks IMX5_CLK_UART1_PER_GATE>;
 				clock-names = "ipg", "per";
+				dmas = <&sdma 18 4 0>, <&sdma 19 4 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -508,6 +520,8 @@
 				clocks = <&clks IMX5_CLK_UART2_IPG_GATE>,
 				         <&clks IMX5_CLK_UART2_PER_GATE>;
 				clock-names = "ipg", "per";
+				dmas = <&sdma 12 4 0>, <&sdma 13 4 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -591,6 +605,8 @@
 				clocks = <&clks IMX5_CLK_UART4_IPG_GATE>,
 				         <&clks IMX5_CLK_UART4_PER_GATE>;
 				clock-names = "ipg", "per";
+				dmas = <&sdma 2 4 0>, <&sdma 3 4 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 		};
@@ -621,6 +637,8 @@
 				clocks = <&clks IMX5_CLK_UART5_IPG_GATE>,
 				         <&clks IMX5_CLK_UART5_PER_GATE>;
 				clock-names = "ipg", "per";
+				dmas = <&sdma 16 4 0>, <&sdma 17 4 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
diff --git a/arch/arm/boot/dts/uniphier-proxstream2-vodka.dts b/arch/arm/boot/dts/imx6dl-gw553x.dts
similarity index 73%
copy from arch/arm/boot/dts/uniphier-proxstream2-vodka.dts
copy to arch/arm/boot/dts/imx6dl-gw553x.dts
index 1fb8bd7..59b8afc 100644
--- a/arch/arm/boot/dts/uniphier-proxstream2-vodka.dts
+++ b/arch/arm/boot/dts/imx6dl-gw553x.dts
@@ -1,7 +1,5 @@
 /*
- * Device Tree Source for UniPhier ProXstream2 Vodka Board
- *
- * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright 2016 Gateworks Corporation
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -10,14 +8,19 @@
  *
  *  a) This file is free software; you can redistribute it and/or
  *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
  *
  *     This file is distributed in the hope that it will be useful,
  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -43,36 +46,10 @@
  */
 
 /dts-v1/;
-/include/ "uniphier-proxstream2.dtsi"
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw553x.dtsi"
 
 / {
-	model = "UniPhier ProXstream2 Vodka Board";
-	compatible = "socionext,proxstream2-vodka", "socionext,proxstream2";
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x80000000>;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	aliases {
-		serial0 = &serial2;
-		serial1 = &serial0;
-		serial2 = &serial1;
-		i2c0 = &i2c0;
-		i2c4 = &i2c4;
-		i2c5 = &i2c5;
-		i2c6 = &i2c6;
-	};
-};
-
-&serial2 {
-	status = "okay";
-};
-
-&i2c0 {
-	status = "okay";
+	model = "Gateworks Ventana i.MX6 DualLite/Solo GW553X";
+	compatible = "gw,imx6dl-gw553x", "gw,ventana", "fsl,imx6dl";
 };
diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts
index 2becd7c..75d7343 100644
--- a/arch/arm/boot/dts/imx6dl-riotboard.dts
+++ b/arch/arm/boot/dts/imx6dl-riotboard.dts
@@ -376,18 +376,18 @@
 			fsl,pins = <
 				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
 				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
 				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x0a0b1		/* AR8035 CLK_25M --> ENET_REF_CLK (V22) */
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0		/* AR8035 pin strapping: IO voltage: pull up */
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x130b0		/* AR8035 pin strapping: PHYADDR#0: pull down */
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x130b0		/* AR8035 pin strapping: PHYADDR#1: pull down */
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0		/* AR8035 pin strapping: MODE#1: pull up */
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0		/* AR8035 pin strapping: MODE#3: pull up */
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030		/* AR8035 pin strapping: IO voltage: pull up */
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x13030		/* AR8035 pin strapping: PHYADDR#0: pull down */
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x13030		/* AR8035 pin strapping: PHYADDR#1: pull down */
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030		/* AR8035 pin strapping: MODE#1: pull up */
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030		/* AR8035 pin strapping: MODE#3: pull up */
 				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x130b0		/* AR8035 pin strapping: MODE#0: pull down */
 				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8	/* GPIO16 -> AR8035 25MHz */
 			        MX6QDL_PAD_EIM_D31__GPIO3_IO31		0x130b0		/* RGMII_nRST */
diff --git a/arch/arm/boot/dts/uniphier-proxstream2-vodka.dts b/arch/arm/boot/dts/imx6dl-ts4900.dts
similarity index 66%
copy from arch/arm/boot/dts/uniphier-proxstream2-vodka.dts
copy to arch/arm/boot/dts/imx6dl-ts4900.dts
index 1fb8bd7..85eddeb 100644
--- a/arch/arm/boot/dts/uniphier-proxstream2-vodka.dts
+++ b/arch/arm/boot/dts/imx6dl-ts4900.dts
@@ -1,7 +1,5 @@
 /*
- * Device Tree Source for UniPhier ProXstream2 Vodka Board
- *
- * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright 2015 Technologic Systems
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -9,21 +7,20 @@
  * whole.
  *
  *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
  *
- *     This file is distributed in the hope that it will be useful,
+ *     This file is distributed in the hope that it will be useful
  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- * Or, alternatively,
+ * Or, alternatively
  *
  *  b) Permission is hereby granted, free of charge, to any person
  *     obtaining a copy of this software and associated documentation
  *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
+ *     restriction, including without limitation the rights to use
  *     copy, modify, merge, publish, distribute, sublicense, and/or
  *     sell copies of the Software, and to permit persons to whom the
  *     Software is furnished to do so, subject to the following
@@ -32,47 +29,21 @@
  *     The above copyright notice and this permission notice shall be
  *     included in all copies or substantial portions of the Software.
  *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
-/include/ "uniphier-proxstream2.dtsi"
+#include "imx6dl.dtsi"
+#include "imx6qdl-ts4900.dtsi"
 
 / {
-	model = "UniPhier ProXstream2 Vodka Board";
-	compatible = "socionext,proxstream2-vodka", "socionext,proxstream2";
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x80000000>;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	aliases {
-		serial0 = &serial2;
-		serial1 = &serial0;
-		serial2 = &serial1;
-		i2c0 = &i2c0;
-		i2c4 = &i2c4;
-		i2c5 = &i2c5;
-		i2c6 = &i2c6;
-	};
-};
-
-&serial2 {
-	status = "okay";
-};
-
-&i2c0 {
-	status = "okay";
+	model = "Technologic Systems i.MX6 Solo/DualLite TS-4900 (Default Device Tree)";
+	compatible = "technologic,imx6dl-ts4900", "fsl,imx6dl";
 };
diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi
index 9a4c22c..1ade195 100644
--- a/arch/arm/boot/dts/imx6dl.dtsi
+++ b/arch/arm/boot/dts/imx6dl.dtsi
@@ -111,6 +111,59 @@
 	};
 };
 
+&gpio1 {
+	gpio-ranges = <&iomuxc  0 131 2>, <&iomuxc  2 137 8>, <&iomuxc 10 189 2>,
+		      <&iomuxc 12 194 1>, <&iomuxc 13 193 1>, <&iomuxc 14 192 1>,
+		      <&iomuxc 15 191 1>, <&iomuxc 16 185 2>, <&iomuxc 18 184 1>,
+		      <&iomuxc 19 187 1>, <&iomuxc 20 183 1>, <&iomuxc 21 188 1>,
+		      <&iomuxc 22 123 3>, <&iomuxc 25 121 1>, <&iomuxc 26 127 1>,
+		      <&iomuxc 27 126 1>, <&iomuxc 28 128 1>, <&iomuxc 29 130 1>,
+		      <&iomuxc 30 129 1>, <&iomuxc 31 122 1>;
+};
+
+&gpio2 {
+	gpio-ranges = <&iomuxc  0 161 8>, <&iomuxc  8 208 8>, <&iomuxc 16  74 1>,
+		      <&iomuxc 17  73 1>, <&iomuxc 18  72 1>, <&iomuxc 19  71 1>,
+		      <&iomuxc 20  70 1>, <&iomuxc 21  69 1>, <&iomuxc 22  68 1>,
+		      <&iomuxc 23  79 2>, <&iomuxc 25 118 2>, <&iomuxc 27 117 1>,
+		      <&iomuxc 28 113 4>;
+};
+
+&gpio3 {
+	gpio-ranges = <&iomuxc  0 97  2>, <&iomuxc 2 105 8>, <&iomuxc 10 99 6>,
+		      <&iomuxc 16 81 16>;
+};
+
+&gpio4 {
+	gpio-ranges = <&iomuxc  5 136 1>, <&iomuxc  6 145 1>, <&iomuxc  7 150 1>,
+		      <&iomuxc  8 146 1>, <&iomuxc  9 151 1>, <&iomuxc 10 147 1>,
+		      <&iomuxc 11 151 1>, <&iomuxc 12 148 1>, <&iomuxc 13 153 1>,
+		      <&iomuxc 14 149 1>, <&iomuxc 15 154 1>, <&iomuxc 16  39 7>,
+		      <&iomuxc 23  56 1>, <&iomuxc 24  61 7>, <&iomuxc 31  46 1>;
+};
+
+&gpio5 {
+	gpio-ranges = <&iomuxc  0 120 1>, <&iomuxc  2 77 1>, <&iomuxc  4 76 1>,
+		      <&iomuxc  5  47 9>, <&iomuxc 14 57 4>, <&iomuxc 18 37 1>,
+		      <&iomuxc 19  36 1>, <&iomuxc 20 35 1>, <&iomuxc 21 38 1>,
+		      <&iomuxc 22  29 6>, <&iomuxc 28 19 4>;
+};
+
+&gpio6 {
+	gpio-ranges = <&iomuxc  0  23 6>, <&iomuxc  6  75 1>, <&iomuxc  7 156 1>,
+		      <&iomuxc  8 155 1>, <&iomuxc  9 170 1>, <&iomuxc 10 169 1>,
+		      <&iomuxc 11 157 1>, <&iomuxc 14 158 3>, <&iomuxc 17 204 1>,
+		      <&iomuxc 18 203 1>, <&iomuxc 19 182 1>, <&iomuxc 20 177 4>,
+		      <&iomuxc 24 175 1>, <&iomuxc 25 171 1>, <&iomuxc 26 181 1>,
+		      <&iomuxc 27 172 3>, <&iomuxc 30 176 1>, <&iomuxc 31  78 1>;
+};
+
+&gpio7 {
+	gpio-ranges = <&iomuxc 0 202 1>, <&iomuxc  1 201 1>, <&iomuxc  2 196 1>,
+		      <&iomuxc 3 195 1>, <&iomuxc  4 197 4>, <&iomuxc  8 205 1>,
+		      <&iomuxc 9 207 1>, <&iomuxc 10 206 1>, <&iomuxc 11 133 3>;
+};
+
 &gpt {
 	compatible = "fsl,imx6dl-gpt";
 };
diff --git a/arch/arm/boot/dts/imx6q-arm2.dts b/arch/arm/boot/dts/imx6q-arm2.dts
index d8acf15..4989d0b 100644
--- a/arch/arm/boot/dts/imx6q-arm2.dts
+++ b/arch/arm/boot/dts/imx6q-arm2.dts
@@ -79,19 +79,19 @@
 			fsl,pins = <
 				MX6QDL_PAD_KEY_COL1__ENET_MDIO		0x1b0b0
 				MX6QDL_PAD_KEY_COL2__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
 				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
 				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
 			>;
 		};
diff --git a/arch/arm/boot/dts/imx6q-b450v3.dts b/arch/arm/boot/dts/imx6q-b450v3.dts
index f0a2be5..78bfc1a 100644
--- a/arch/arm/boot/dts/imx6q-b450v3.dts
+++ b/arch/arm/boot/dts/imx6q-b450v3.dts
@@ -89,3 +89,19 @@
 		};
 	};
 };
+
+&pca9539 {
+	P04 {
+		gpio-hog;
+		gpios = <4 0>;
+		output-low;
+		line-name = "PCA9539-P04";
+	};
+
+	P05 {
+		gpio-hog;
+		gpios = <5 0>;
+		output-low;
+		line-name = "PCA9539-P05";
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-b650v3.dts b/arch/arm/boot/dts/imx6q-b650v3.dts
index 33cb71a..d853887 100644
--- a/arch/arm/boot/dts/imx6q-b650v3.dts
+++ b/arch/arm/boot/dts/imx6q-b650v3.dts
@@ -89,3 +89,12 @@
 		};
 	};
 };
+
+&pca9539 {
+	P05 {
+		gpio-hog;
+		gpios = <5 0>;
+		output-low;
+		line-name = "PCA9539-P05";
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-ba16.dtsi b/arch/arm/boot/dts/imx6q-ba16.dtsi
index f2adc60..308e11c 100644
--- a/arch/arm/boot/dts/imx6q-ba16.dtsi
+++ b/arch/arm/boot/dts/imx6q-ba16.dtsi
@@ -448,19 +448,19 @@
 		fsl,pins = <
 			MX6QDL_PAD_ENET_MDIO__ENET_MDIO       0x100b0
 			MX6QDL_PAD_ENET_MDC__ENET_MDC         0x100b0
-			MX6QDL_PAD_RGMII_TXC__RGMII_TXC       0x100b0
-			MX6QDL_PAD_RGMII_TD0__RGMII_TD0       0x100b0
-			MX6QDL_PAD_RGMII_TD1__RGMII_TD1       0x100b0
-			MX6QDL_PAD_RGMII_TD2__RGMII_TD2       0x100b0
-			MX6QDL_PAD_RGMII_TD3__RGMII_TD3       0x100b0
-			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x100b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC       0x10030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0       0x10030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1       0x10030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2       0x10030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3       0x10030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x10030
 			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x100b0
-			MX6QDL_PAD_RGMII_RXC__RGMII_RXC       0x1b0b0
-			MX6QDL_PAD_RGMII_RD0__RGMII_RD0       0x1b0b0
-			MX6QDL_PAD_RGMII_RD1__RGMII_RD1       0x1b0b0
-			MX6QDL_PAD_RGMII_RD2__RGMII_RD2       0x1b0b0
-			MX6QDL_PAD_RGMII_RD3__RGMII_RD3       0x1b0b0
-			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC       0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0       0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1       0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2       0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3       0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
 			/* FEC Reset */
 			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28     0x1b0b0
 			/* AR8033 Interrupt */
diff --git a/arch/arm/boot/dts/imx6q-bx50v3.dtsi b/arch/arm/boot/dts/imx6q-bx50v3.dtsi
index cf3fd31..e4a415f 100644
--- a/arch/arm/boot/dts/imx6q-bx50v3.dtsi
+++ b/arch/arm/boot/dts/imx6q-bx50v3.dtsi
@@ -183,6 +183,76 @@
 				interrupt-controller;
 				interrupt-parent = <&gpio2>;
 				interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+				P06 {
+					gpio-hog;
+					gpios = <6 0>;
+					output-low;
+					line-name = "PCA9539-P06";
+				};
+
+				P07 {
+					gpio-hog;
+					gpios = <7 0>;
+					output-low;
+					line-name = "PCA9539-P07";
+				};
+
+				P10 {
+					gpio-hog;
+					gpios = <8 0>;
+					output-low;
+					line-name = "PCA9539-P10";
+				};
+
+				P11 {
+					gpio-hog;
+					gpios = <9 0>;
+					output-low;
+					line-name = "PCA9539-P11";
+				};
+
+				P12 {
+					gpio-hog;
+					gpios = <10 0>;
+					output-low;
+					line-name = "PCA9539-P12";
+				};
+
+				P13 {
+					gpio-hog;
+					gpios = <11 0>;
+					output-low;
+					line-name = "PCA9539-P13";
+				};
+
+				P14 {
+					gpio-hog;
+					gpios = <12 0>;
+					output-low;
+					line-name = "PCA9539-P14";
+				};
+
+				P15 {
+					gpio-hog;
+					gpios = <13 0>;
+					output-low;
+					line-name = "PCA9539-P15";
+				};
+
+				P16 {
+					gpio-hog;
+					gpios = <14 0>;
+					output-low;
+					line-name = "PCA9539-P16";
+				};
+
+				P17 {
+					gpio-hog;
+					gpios = <15 0>;
+					output-low;
+					line-name = "PCA9539-P17";
+				};
 			};
 		};
 
diff --git a/arch/arm/boot/dts/imx6q-cm-fx6.dts b/arch/arm/boot/dts/imx6q-cm-fx6.dts
index b5de7e6..59bc5a4 100644
--- a/arch/arm/boot/dts/imx6q-cm-fx6.dts
+++ b/arch/arm/boot/dts/imx6q-cm-fx6.dts
@@ -168,18 +168,18 @@
 
 	pinctrl_enet: enetgrp {
 		fsl,pins = <
-			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
-			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
 			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
 			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
 			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
index 9059073..908dab6 100644
--- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
+++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
@@ -324,18 +324,18 @@
 
 		pinctrl_enet: enetgrp {
 			fsl,pins = <
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
 				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
 				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
 				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
diff --git a/arch/arm/boot/dts/imx6q-evi.dts b/arch/arm/boot/dts/imx6q-evi.dts
index 4fa5601..6de21ff 100644
--- a/arch/arm/boot/dts/imx6q-evi.dts
+++ b/arch/arm/boot/dts/imx6q-evi.dts
@@ -139,6 +139,9 @@
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii";
 	phy-reset-gpios = <&gpio1 25 0>;
+	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	fsl,err006687-workaround-present;
 	status = "okay";
 };
 
@@ -303,21 +306,22 @@
 		fsl,pins = <
 			MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
 			MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
-			MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
-			MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
-			MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
-			MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
-			MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
-			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
 			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
-			MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
-			MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
-			MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
-			MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
-			MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
-			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
 			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x4001b0a8
 			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0
+			MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1
 		>;
 	};
 
diff --git a/arch/arm/boot/dts/imx6q-gw5400-a.dts b/arch/arm/boot/dts/imx6q-gw5400-a.dts
index 0511137..747bc10 100644
--- a/arch/arm/boot/dts/imx6q-gw5400-a.dts
+++ b/arch/arm/boot/dts/imx6q-gw5400-a.dts
@@ -421,18 +421,18 @@
 
 		pinctrl_enet: enetgrp {
 			fsl,pins = <
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
 				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
 				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
 				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
diff --git a/arch/arm/boot/dts/uniphier-proxstream2-vodka.dts b/arch/arm/boot/dts/imx6q-gw553x.dts
similarity index 73%
copy from arch/arm/boot/dts/uniphier-proxstream2-vodka.dts
copy to arch/arm/boot/dts/imx6q-gw553x.dts
index 1fb8bd7..e9c224c 100644
--- a/arch/arm/boot/dts/uniphier-proxstream2-vodka.dts
+++ b/arch/arm/boot/dts/imx6q-gw553x.dts
@@ -1,7 +1,5 @@
 /*
- * Device Tree Source for UniPhier ProXstream2 Vodka Board
- *
- * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright 2016 Gateworks Corporation
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -10,14 +8,19 @@
  *
  *  a) This file is free software; you can redistribute it and/or
  *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
  *
  *     This file is distributed in the hope that it will be useful,
  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -43,36 +46,10 @@
  */
 
 /dts-v1/;
-/include/ "uniphier-proxstream2.dtsi"
+#include "imx6q.dtsi"
+#include "imx6qdl-gw553x.dtsi"
 
 / {
-	model = "UniPhier ProXstream2 Vodka Board";
-	compatible = "socionext,proxstream2-vodka", "socionext,proxstream2";
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x80000000>;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	aliases {
-		serial0 = &serial2;
-		serial1 = &serial0;
-		serial2 = &serial1;
-		i2c0 = &i2c0;
-		i2c4 = &i2c4;
-		i2c5 = &i2c5;
-		i2c6 = &i2c6;
-	};
-};
-
-&serial2 {
-	status = "okay";
-};
-
-&i2c0 {
-	status = "okay";
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW553X";
+	compatible = "gw,imx6q-gw553x", "gw,ventana", "fsl,imx6q";
 };
diff --git a/arch/arm/boot/dts/imx6q-marsboard.dts b/arch/arm/boot/dts/imx6q-marsboard.dts
index 3f8013c..f7995c5 100644
--- a/arch/arm/boot/dts/imx6q-marsboard.dts
+++ b/arch/arm/boot/dts/imx6q-marsboard.dts
@@ -252,26 +252,26 @@
 		fsl,pins = <
 			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
 			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
 			/* AR8035 CLK_25M --> ENET_REF_CLK (V22) */
 			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x0a0b1
 			/* AR8035 pin strapping: IO voltage: pull up */
-			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
 			/* AR8035 pin strapping: PHYADDR#0: pull down */
-			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x130b0
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x13030
 			/* AR8035 pin strapping: PHYADDR#1: pull down */
-			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x130b0
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x13030
 			/* AR8035 pin strapping: MODE#1: pull up */
-			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
 			/* AR8035 pin strapping: MODE#3: pull up */
-			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
 			/* AR8035 pin strapping: MODE#0: pull down */
-			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x130b0
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x13030
 			/* GPIO16 -> AR8035 25MHz */
 			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
 			/* RGMII_nRST */
diff --git a/arch/arm/boot/dts/imx6q-novena.dts b/arch/arm/boot/dts/imx6q-novena.dts
index 5acd0c6..1723e89e 100644
--- a/arch/arm/boot/dts/imx6q-novena.dts
+++ b/arch/arm/boot/dts/imx6q-novena.dts
@@ -549,12 +549,12 @@
 			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b028
 			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b028
 			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
 			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
 			/* Ethernet reset */
 			MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x1b0b1
diff --git a/arch/arm/boot/dts/imx6q-sbc6x.dts b/arch/arm/boot/dts/imx6q-sbc6x.dts
index 86cf093..2557330 100644
--- a/arch/arm/boot/dts/imx6q-sbc6x.dts
+++ b/arch/arm/boot/dts/imx6q-sbc6x.dts
@@ -31,19 +31,19 @@
 			fsl,pins = <
 				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
 				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
 				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
 				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
 			>;
 		};
diff --git a/arch/arm/boot/dts/imx6q-tbs2910.dts b/arch/arm/boot/dts/imx6q-tbs2910.dts
index d7c8ccb..06f492e1 100644
--- a/arch/arm/boot/dts/imx6q-tbs2910.dts
+++ b/arch/arm/boot/dts/imx6q-tbs2910.dts
@@ -284,19 +284,19 @@
 		fsl,pins = <
 			MX6QDL_PAD_ENET_MDIO__ENET_MDIO       0x1b0b0
 			MX6QDL_PAD_ENET_MDC__ENET_MDC         0x1b0b0
-			MX6QDL_PAD_RGMII_TXC__RGMII_TXC       0x1b0b0
-			MX6QDL_PAD_RGMII_TD0__RGMII_TD0       0x1b0b0
-			MX6QDL_PAD_RGMII_TD1__RGMII_TD1       0x1b0b0
-			MX6QDL_PAD_RGMII_TD2__RGMII_TD2       0x1b0b0
-			MX6QDL_PAD_RGMII_TD3__RGMII_TD3       0x1b0b0
-			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC       0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0       0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1       0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2       0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3       0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
 			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x1b0b0
-			MX6QDL_PAD_RGMII_RXC__RGMII_RXC       0x1b0b0
-			MX6QDL_PAD_RGMII_RD0__RGMII_RD0       0x1b0b0
-			MX6QDL_PAD_RGMII_RD1__RGMII_RD1       0x1b0b0
-			MX6QDL_PAD_RGMII_RD2__RGMII_RD2       0x1b0b0
-			MX6QDL_PAD_RGMII_RD3__RGMII_RD3       0x1b0b0
-			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC       0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0       0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1       0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2       0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3       0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
 			MX6QDL_PAD_GPIO_16__ENET_REF_CLK      0x4001b0a8
 			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25    0x1b059
 		>;
diff --git a/arch/arm/boot/dts/uniphier-proxstream2-vodka.dts b/arch/arm/boot/dts/imx6q-ts4900.dts
similarity index 67%
copy from arch/arm/boot/dts/uniphier-proxstream2-vodka.dts
copy to arch/arm/boot/dts/imx6q-ts4900.dts
index 1fb8bd7..9b81ebc 100644
--- a/arch/arm/boot/dts/uniphier-proxstream2-vodka.dts
+++ b/arch/arm/boot/dts/imx6q-ts4900.dts
@@ -1,7 +1,5 @@
 /*
- * Device Tree Source for UniPhier ProXstream2 Vodka Board
- *
- * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright 2015 Technologic Systems
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -9,21 +7,20 @@
  * whole.
  *
  *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
  *
- *     This file is distributed in the hope that it will be useful,
+ *     This file is distributed in the hope that it will be useful
  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- * Or, alternatively,
+ * Or, alternatively
  *
  *  b) Permission is hereby granted, free of charge, to any person
  *     obtaining a copy of this software and associated documentation
  *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
+ *     restriction, including without limitation the rights to use
  *     copy, modify, merge, publish, distribute, sublicense, and/or
  *     sell copies of the Software, and to permit persons to whom the
  *     Software is furnished to do so, subject to the following
@@ -32,47 +29,25 @@
  *     The above copyright notice and this permission notice shall be
  *     included in all copies or substantial portions of the Software.
  *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
-/include/ "uniphier-proxstream2.dtsi"
+#include "imx6q.dtsi"
+#include "imx6qdl-ts4900.dtsi"
 
 / {
-	model = "UniPhier ProXstream2 Vodka Board";
-	compatible = "socionext,proxstream2-vodka", "socionext,proxstream2";
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x80000000>;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	aliases {
-		serial0 = &serial2;
-		serial1 = &serial0;
-		serial2 = &serial1;
-		i2c0 = &i2c0;
-		i2c4 = &i2c4;
-		i2c5 = &i2c5;
-		i2c6 = &i2c6;
-	};
+	model = "Technologic Systems i.MX6 Quad TS-4900 (Default Device Tree)";
+	compatible = "technologic,imx6q-ts4900", "fsl,imx6q";
 };
 
-&serial2 {
-	status = "okay";
-};
-
-&i2c0 {
+&sata {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index c30c836..e9a5d0b 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -209,6 +209,43 @@
 	};
 };
 
+&gpio1 {
+	gpio-ranges = <&iomuxc  0 136  2>, <&iomuxc  2 141 1>, <&iomuxc  3 139 1>,
+		      <&iomuxc  4 142  2>, <&iomuxc  6 140 1>, <&iomuxc  7 144 2>,
+		      <&iomuxc  9 138  1>, <&iomuxc 10 213 3>, <&iomuxc 13  20 1>,
+		      <&iomuxc 14  19  1>, <&iomuxc 15  21 1>, <&iomuxc 16 208 1>,
+		      <&iomuxc 17 207  1>, <&iomuxc 18 210 3>, <&iomuxc 21 209 1>,
+		      <&iomuxc 22 116 10>;
+};
+
+&gpio2 {
+	gpio-ranges = <&iomuxc  0 191 16>, <&iomuxc 16 55 14>, <&iomuxc 30 35 1>,
+		      <&iomuxc 31  44  1>;
+};
+
+&gpio3 {
+	gpio-ranges = <&iomuxc 0 69 16>, <&iomuxc 16 36 8>, <&iomuxc 24 45 8>;
+};
+
+&gpio4 {
+	gpio-ranges = <&iomuxc 5 149 1>, <&iomuxc 6 126 10>, <&iomuxc 16 87 16>;
+};
+
+&gpio5 {
+	gpio-ranges = <&iomuxc 0  85  1>, <&iomuxc  2  34  1>, <&iomuxc 4 53 1>,
+		      <&iomuxc 5 103 13>, <&iomuxc 18 150 14>;
+};
+
+&gpio6 {
+	gpio-ranges = <&iomuxc  0 164 6>, <&iomuxc  6  54 1>, <&iomuxc  7 181  5>,
+		      <&iomuxc 14 186 3>, <&iomuxc 17 170 2>, <&iomuxc 19  22 12>,
+		      <&iomuxc 31  86 1>;
+};
+
+&gpio7 {
+	gpio-ranges = <&iomuxc 0 172 9>, <&iomuxc 9 189 2>, <&iomuxc 11 146 3>;
+};
+
 &hdmi {
 	compatible = "fsl,imx6q-hdmi";
 
diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
index 315e033f..99e323b 100644
--- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
@@ -586,19 +586,19 @@
 		fsl,pins = <
 			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
 			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
-			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x100b0
-			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x100b0
-			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x100b0
-			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x100b0
-			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x100b0
-			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x100b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x10030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x10030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x10030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x10030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x10030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x10030
 			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
-			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
 			/* Ethernet PHY reset */
 			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x000b0
 			/* Ethernet PHY interrupt */
diff --git a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
index da1341d..b2c083d 100644
--- a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
@@ -67,18 +67,18 @@
 
 		pinctrl_enet: enetgrp {
 			fsl,pins = <
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
 				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
 				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
 				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
diff --git a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
index 9d7ab6c..afec2c7 100644
--- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
@@ -228,22 +228,28 @@
 	status = "okay";
 };
 
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
 &iomuxc {
 	imx6qdl-gw51xx {
 		pinctrl_enet: enetgrp {
 			fsl,pins = <
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
 				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
 				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
 				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
@@ -364,5 +370,11 @@
 				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0 /* OTG_PWR_EN */
 			>;
 		};
+
+		pinctrl_wdog: wdoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
+			>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
index 7191b84..a7100f9 100644
--- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
@@ -315,6 +315,8 @@
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+	rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
@@ -353,6 +355,12 @@
 	status = "okay";
 };
 
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
 &iomuxc {
 	imx6qdl-gw52xx {
 		pinctrl_audmux: audmuxgrp {
@@ -376,18 +384,18 @@
 
 		pinctrl_enet: enetgrp {
 			fsl,pins = <
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
 				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
 				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
 				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
@@ -487,6 +495,7 @@
 			fsl,pins = <
 				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
 				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+				MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x4001b0b1 /* TEN */
 			>;
 		};
 
@@ -549,5 +558,11 @@
 				MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170f9
 			>;
 		};
+
+		pinctrl_wdog: wdoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
+			>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
index 40d06b0..8953eba 100644
--- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
@@ -312,6 +312,8 @@
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+	rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
@@ -351,6 +353,12 @@
 	status = "okay";
 };
 
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
 &iomuxc {
 	imx6qdl-gw53xx {
 		pinctrl_audmux: audmuxgrp {
@@ -365,18 +373,18 @@
 
 		pinctrl_enet: enetgrp {
 			fsl,pins = <
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
 				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
 				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
 				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
@@ -476,6 +484,7 @@
 			fsl,pins = <
 				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
 				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+				MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x4001b0b1 /* TEN */
 			>;
 		};
 
@@ -539,5 +548,11 @@
 				MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170f9
 			>;
 		};
+
+		pinctrl_wdog: wdoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
+			>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
index d6dbe2a..6ac41c7 100644
--- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
@@ -414,6 +414,8 @@
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+	rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
@@ -453,6 +455,17 @@
 	status = "okay";
 };
 
+&wdog1 {
+	status = "disabled";
+};
+
+&wdog2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
 &iomuxc {
 	imx6qdl-gw54xx {
 		pinctrl_audmux: audmuxgrp {
@@ -467,18 +480,18 @@
 
 		pinctrl_enet: enetgrp {
 			fsl,pins = <
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
 				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
 				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
 				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
@@ -592,6 +605,7 @@
 			fsl,pins = <
 				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
 				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+				MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x4001b0b1 /* TEN */
 			>;
 		};
 
@@ -654,5 +668,11 @@
 				MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170f9
 			>;
 		};
+
+		pinctrl_wdog: wdoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT3__WDOG2_B		0x1b0b0
+			>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
index 118bea5..4b9fef8 100644
--- a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
@@ -239,6 +239,12 @@
 	status = "okay";
 };
 
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
 &iomuxc {
 	imx6qdl-gw51xx {
 		pinctrl_flexcan1: flexcan1grp {
@@ -333,5 +339,11 @@
 				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
 			>;
 		};
+
+		pinctrl_wdog: wdoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
+			>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
index f27f184..805e236 100644
--- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
@@ -197,6 +197,12 @@
 	status = "okay";
 };
 
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
 &iomuxc {
 	imx6qdl-gw552x {
 		pinctrl_gpio_leds: gpioledsgrp {
@@ -286,5 +292,11 @@
 				MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
 			>;
                 };
+
+		pinctrl_wdog: wdoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
+			>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
new file mode 100644
index 0000000..86cec05
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
@@ -0,0 +1,433 @@
+/*
+ * Copyright 2016 Gateworks Corporation
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	/* these are used by bootloader for disabling nodes */
+	aliases {
+		led0 = &led0;
+		led1 = &led1;
+		nand = &gpmi;
+		usb0 = &usbh1;
+		usb1 = &usbotg;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led0: user1 {
+			label = "user1";
+			gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: user2 {
+			label = "user2";
+			gpios = <&gpio4 11 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
+			default-state = "off";
+		};
+	};
+
+	memory {
+		reg = <0x10000000 0x20000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P0V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_5p0v: regulator-5p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "5P0V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi>;
+	ddc-i2c-bus = <&i2c3>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	gpio: pca9555@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	eeprom1: eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom2: eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom3: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom4: eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	rtc: ds1672@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+	status = "disabled";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>; /* MX6_DIO3 */
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+		>;
+	};
+
+	pinctrl_hdmi: hdmigrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE	0x1f8b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL2__GPIO4_IO10		0x1b0b0
+			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11		0x1b0b0
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x4001b0b0 /* PCIESKT_WDIS# */
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0 /* OTG_PWR_EN */
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x17059 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x17059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170b9 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170f9 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170f9
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi
index f8d945a..d5c3aa8 100644
--- a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi
@@ -254,19 +254,19 @@
 		fsl,pins = <
 			MX6QDL_PAD_ENET_MDIO__ENET_MDIO       0x1b0b0
 			MX6QDL_PAD_ENET_MDC__ENET_MDC         0x1b0b0
-			MX6QDL_PAD_RGMII_TXC__RGMII_TXC       0x1b0b0
-			MX6QDL_PAD_RGMII_TD0__RGMII_TD0       0x1b0b0
-			MX6QDL_PAD_RGMII_TD1__RGMII_TD1       0x1b0b0
-			MX6QDL_PAD_RGMII_TD2__RGMII_TD2       0x1b0b0
-			MX6QDL_PAD_RGMII_TD3__RGMII_TD3       0x1b0b0
-			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC       0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0       0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1       0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2       0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3       0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
 			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x1b0b0
-			MX6QDL_PAD_RGMII_RXC__RGMII_RXC       0x1b0b0
-			MX6QDL_PAD_RGMII_RD0__RGMII_RD0       0x1b0b0
-			MX6QDL_PAD_RGMII_RD1__RGMII_RD1       0x1b0b0
-			MX6QDL_PAD_RGMII_RD2__RGMII_RD2       0x1b0b0
-			MX6QDL_PAD_RGMII_RD3__RGMII_RD3       0x1b0b0
-			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC       0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0       0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1       0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2       0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3       0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
 			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN     0x1b0b0
 		>;
 	};
diff --git a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
index cfd50ea..880bd78 100644
--- a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
@@ -361,12 +361,12 @@
 				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x100b0
 				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x100b0
 				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
 				/* Phy reset */
 				MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x0f0b0
 				MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b0
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
index 9677bf3..b0b3220 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
@@ -484,19 +484,19 @@
 			fsl,pins = <
 				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
 				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x100b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x100b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x100b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x100b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x100b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x100b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x10030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x10030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x10030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x10030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x10030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x10030
 				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
 				/* Phy reset */
 				MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x0f0b0
 				MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b0
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
index 97d9c33..db868bc 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
@@ -394,19 +394,19 @@
 			fsl,pins = <
 				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
 				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x100b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x100b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x100b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x100b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x100b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x100b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x10030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x10030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x10030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x10030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x10030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x10030
 				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
 				/* Phy reset */
 				MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x000b0
 				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
index d6d98d4..e0280cac2 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
@@ -231,19 +231,19 @@
 			fsl,pins = <
 				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
 				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
 				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
 				MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
 			>;
 		};
@@ -379,6 +379,18 @@
 	status = "disabled";
 };
 
+&reg_arm {
+	vin-supply = <&vddcore_reg>;
+};
+
+&reg_pu {
+	vin-supply = <&vddsoc_reg>;
+};
+
+&reg_soc {
+	vin-supply = <&vddsoc_reg>;
+};
+
 &uart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart3>;
diff --git a/arch/arm/boot/dts/imx6qdl-rex.dtsi b/arch/arm/boot/dts/imx6qdl-rex.dtsi
index cacf593..17704a5 100644
--- a/arch/arm/boot/dts/imx6qdl-rex.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-rex.dtsi
@@ -196,19 +196,19 @@
 			fsl,pins = <
 				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
 				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
 				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
 				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
 				/* Phy reset */
 				MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x000b0
diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
index 6aa193f..e000e6f 100644
--- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
@@ -345,19 +345,19 @@
 			fsl,pins = <
 				MX6QDL_PAD_KEY_COL1__ENET_MDIO		0x1b0b0
 				MX6QDL_PAD_KEY_COL2__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
 				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
 				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
 			>;
 		};
diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
index f65fdfc..81dd6cd 100644
--- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
@@ -359,19 +359,19 @@
 			fsl,pins = <
 				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
 				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x100b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x100b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x100b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x100b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x100b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x100b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x10030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x10030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x10030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x10030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x10030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x10030
 				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
 				/* Phy reset */
 				MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x000b0
 				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index d77ea94..8e9e0d9 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -380,19 +380,19 @@
 			fsl,pins = <
 				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
 				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
 				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
 				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
 			>;
 		};
diff --git a/arch/arm/boot/dts/imx6qdl-ts4900.dtsi b/arch/arm/boot/dts/imx6qdl-ts4900.dtsi
new file mode 100644
index 0000000..5c26b26
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-ts4900.dtsi
@@ -0,0 +1,481 @@
+/*
+ * Copyright 2015 Technologic Systems
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	aliases {
+		ethernet0 = &fec;
+	};
+
+	leds {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds1>;
+		compatible = "gpio-leds";
+
+		green-led {
+			label = "green-led";
+			gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		red-led {
+			label = "red-led";
+			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3p3v";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	status = "okay";
+};
+
+&ecspi1 {
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	n25q064: flash@0 {
+		compatible = "micron,n25q064", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+	};
+};
+
+&ecspi2 {
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	isl12022: rtc@6f {
+		compatible = "isil,isl12022";
+		reg = <0x6f>;
+	};
+
+	gpio8: gpio@28 {
+		compatible = "technologic,ts4900-gpio";
+		reg = <0x28>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		ngpio = <32>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x100b1 /* Onboard flash CS1# */
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__ECSPI2_SCLK	0x100b1
+			MX6QDL_PAD_CSI0_DAT9__ECSPI2_MOSI	0x100b1
+			MX6QDL_PAD_CSI0_DAT10__ECSPI2_MISO	0x100b1
+			MX6QDL_PAD_CSI0_DAT11__GPIO5_IO29	0x100b1 /* Offboard CS0# */
+			MX6QDL_PAD_CSI0_DAT16__GPIO6_IO02	0x100b1 /* FPGA CS1# */
+			MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21	0x1b0b1 /* FPGA_RESET# */
+			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20	0x1b0b1 /* FPGA_DONE */
+			MX6QDL_PAD_GPIO_3__XTALOSC_REF_CLK_24M	0x10    /* FPGA 24MHZ */
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b1 /* FPGA_IRQ */
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x4001b0a8
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b1
+			MX6QDL_PAD_DI0_PIN4__GPIO4_IO20		0x1b0b1 /* ETH_PHY_RESET */
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b1
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b1
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX	0x1b0b1
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A17__GPIO2_IO21		0x1b0b1 /* OFF_BD_RESET# */
+			MX6QDL_PAD_EIM_A16__GPIO2_IO22		0x1b0b1 /* EN_USB_5V# */
+			MX6QDL_PAD_EIM_A19__GPIO2_IO19		0x1b0b1 /* EN_LCD_3.3V */
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0 /* Audio CLK */
+			MX6QDL_PAD_GPIO_5__GPIO1_IO05		0x1b0b1 /* DIO_1 */
+			MX6QDL_PAD_GPIO_6__GPIO1_IO06		0x1b0b1 /* DIO_2 */
+			MX6QDL_PAD_GPIO_9__GPIO1_IO09		0x1b0b1 /* DIO_3 */
+			MX6QDL_PAD_GPIO_16__GPIO7_IO11		0x1b0b1 /* DIO_4 */
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x1b0b1 /* DIO_5 */
+			MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x1b0b1 /* DIO_7 */
+			MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19	0x1b0b1 /* DIO_8 */
+			MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18	0x1b0b1 /* DIO_9 */
+			MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30	0x1b0b1 /* DIO_0 */
+			MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31	0x1b0b1 /* DIO_6 */
+			MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03	0x1b0b1 /* CPU_DIO_A */
+			MX6QDL_PAD_SD4_DAT7__GPIO2_IO15		0x1b0b1 /* DIO_2 */
+			MX6QDL_PAD_SD3_RST__GPIO7_IO08		0x1b0b1 /* CPU_DIO_B */
+			MX6QDL_PAD_EIM_LBA__GPIO2_IO27		0x1b0b1 /* BUS_ALE# */
+			MX6QDL_PAD_EIM_OE__GPIO2_IO25		0x1b0b1 /* DIO_15 */
+			MX6QDL_PAD_EIM_RW__GPIO2_IO26		0x1b0b1 /* BUS_DIR */
+			MX6QDL_PAD_EIM_CS0__GPIO2_IO23		0x1b0b1 /* BUS_CS# */
+			MX6QDL_PAD_EIM_A18__GPIO2_IO20		0x1b0b1 /* DIO_14 */
+			MX6QDL_PAD_EIM_A20__GPIO2_IO18		0x1b0b1 /* DIO_16 */
+			MX6QDL_PAD_EIM_A21__GPIO2_IO17		0x1b0b1 /* DIO_12 */
+			MX6QDL_PAD_EIM_A22__GPIO2_IO16		0x1b0b1 /* DIO_18 */
+			MX6QDL_PAD_EIM_A23__GPIO6_IO06		0x1b0b1 /* DIO_19 */
+			MX6QDL_PAD_EIM_A24__GPIO5_IO04		0x1b0b1 /* DIO_20 */
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31		0x1b0b1 /* BUS_BHE# */
+			MX6QDL_PAD_EIM_BCLK__GPIO6_IO31		0x1b0b1 /* DIO_13 */
+			MX6QDL_PAD_EIM_WAIT__GPIO5_IO00		0x1b0b1 /* EIM_WAIT# */
+			MX6QDL_PAD_EIM_EB1__GPIO2_IO29		0x1b0b1 /* DIO_10 */
+			MX6QDL_PAD_EIM_DA0__GPIO3_IO00		0x1b0b1 /* MUX_AD_00 */
+			MX6QDL_PAD_EIM_DA1__GPIO3_IO01		0x1b0b1 /* MUX_AD_01 */
+			MX6QDL_PAD_EIM_DA2__GPIO3_IO02		0x1b0b1 /* MUX_AD_02 */
+			MX6QDL_PAD_EIM_DA3__GPIO3_IO03		0x1b0b1 /* MUX_AD_03 */
+			MX6QDL_PAD_EIM_DA4__GPIO3_IO04		0x1b0b1 /* MUX_AD_04 */
+			MX6QDL_PAD_EIM_DA5__GPIO3_IO05		0x1b0b1 /* MUX_AD_05 */
+			MX6QDL_PAD_EIM_DA6__GPIO3_IO06		0x1b0b1 /* MUX_AD_06 */
+			MX6QDL_PAD_EIM_DA7__GPIO3_IO07		0x1b0b1 /* MUX_AD_07 */
+			MX6QDL_PAD_EIM_DA8__GPIO3_IO08		0x1b0b1 /* MUX_AD_08 */
+			MX6QDL_PAD_EIM_DA9__GPIO3_IO09		0x1b0b1 /* MUX_AD_09 */
+			MX6QDL_PAD_EIM_DA10__GPIO3_IO10		0x1b0b1 /* MUX_AD_10 */
+			MX6QDL_PAD_EIM_DA11__GPIO3_IO11		0x1b0b1 /* MUX_AD_11 */
+			MX6QDL_PAD_EIM_DA12__GPIO3_IO12		0x1b0b1 /* MUX_AD_12 */
+			MX6QDL_PAD_EIM_DA13__GPIO3_IO13		0x1b0b1 /* MUX_AD_13 */
+			MX6QDL_PAD_EIM_DA14__GPIO3_IO14		0x1b0b1 /* MUX_AD_14 */
+			MX6QDL_PAD_EIM_DA15__GPIO3_IO15		0x1b0b1 /* MUX_AD_15 */
+			MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16	0x1b0b1 /* LCD_CLK */
+			MX6QDL_PAD_DI0_PIN15__GPIO4_IO17	0x1b0b1 /* DE */
+			MX6QDL_PAD_DI0_PIN2__GPIO4_IO18		0x1b0b1 /* Hsync */
+			MX6QDL_PAD_DI0_PIN3__GPIO4_IO19		0x1b0b1 /* Vsync */
+			MX6QDL_PAD_DISP0_DAT0__GPIO4_IO21	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT1__GPIO4_IO22	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT2__GPIO4_IO23	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT8__GPIO4_IO29	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT10__GPIO4_IO31	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT12__GPIO5_IO06	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT13__GPIO5_IO07	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x1b0b1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__GPIO3_IO21		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__GPIO3_IO28		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__GPIO4_IO12		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__GPIO4_IO13		0x4001b8b1
+		>;
+	};
+
+	pinctrl_leds1: leds1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b1 /* RED_LED# */
+			MX6QDL_PAD_EIM_CS1__GPIO2_IO24		0x1b0b1 /* GREEN_LED# */
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_GPIO_8__UART2_RX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT6__UART2_CTS_B	0x1b0b1
+			MX6QDL_PAD_SD4_DAT5__UART2_RTS_B	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD		0x17059
+			MX6QDL_PAD_SD1_CLK__SD1_CLK		0x10059
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x17059
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x17059
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x17059
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x17059
+			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x17059 /* WIFI IRQ */
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+			MX6QDL_PAD_EIM_EB0__GPIO2_IO28		0x1b0b1 /* EN_SD_POWER# */
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+		>;
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+/* SD */
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	vmmc-supply = <&reg_3p3v>;
+	bus-width = <4>;
+	fsl,wp-controller;
+	status = "okay";
+};
+
+/* eMMC */
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	vmmc-supply = <&reg_3p3v>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-udoo.dtsi b/arch/arm/boot/dts/imx6qdl-udoo.dtsi
index 3bee2f9..c96c91d 100644
--- a/arch/arm/boot/dts/imx6qdl-udoo.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-udoo.dtsi
@@ -132,18 +132,18 @@
 	imx6q-udoo {
 		pinctrl_enet: enetgrp {
 			fsl,pins = <
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
 				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
 				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
 				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
index 3ffe00c..2b9c2be 100644
--- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
@@ -109,19 +109,19 @@
 			fsl,pins = <
 				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
 				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
 				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
 				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
 				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
 			>;
diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
index 5425150..02378db 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -375,6 +375,12 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc  0 22 1>, <&iomuxc  1 20 2>,
+					      <&iomuxc  3 23 1>, <&iomuxc  4 25 1>,
+					      <&iomuxc  5 24 1>, <&iomuxc  6 19 1>,
+					      <&iomuxc  7 36 2>, <&iomuxc  9 44 8>,
+					      <&iomuxc 17 38 6>, <&iomuxc 23 68 4>,
+					      <&iomuxc 27 64 4>, <&iomuxc 31 52 1>;
 			};
 
 			gpio2: gpio@020a0000 {
@@ -386,6 +392,13 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc  0  53 3>, <&iomuxc  3  72 2>,
+					      <&iomuxc  5  34 2>, <&iomuxc  7  57 4>,
+					      <&iomuxc 11  56 1>, <&iomuxc 12  61 3>,
+					      <&iomuxc 15 107 1>, <&iomuxc 16 132 2>,
+					      <&iomuxc 18 135 1>, <&iomuxc 19 134 1>,
+					      <&iomuxc 20 108 2>, <&iomuxc 22 120 1>,
+					      <&iomuxc 23 125 7>, <&iomuxc 30 110 2>;
 			};
 
 			gpio3: gpio@020a4000 {
@@ -397,6 +410,14 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc  0 112 8>, <&iomuxc  8 121 4>,
+					      <&iomuxc 12  97 4>, <&iomuxc 16 166 3>,
+					      <&iomuxc 19  85 2>, <&iomuxc 21 137 2>,
+					      <&iomuxc 23 136 1>, <&iomuxc 24  91 1>,
+					      <&iomuxc 25  99 1>, <&iomuxc 26  92 1>,
+					      <&iomuxc 27 100 1>, <&iomuxc 28  93 1>,
+					      <&iomuxc 29 101 1>, <&iomuxc 30  94 1>,
+					      <&iomuxc 31 102 1>;
 			};
 
 			gpio4: gpio@020a8000 {
@@ -408,6 +429,21 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc  0  95 1>, <&iomuxc  1 103 1>,
+					      <&iomuxc  2  96 1>, <&iomuxc  3 104 1>,
+					      <&iomuxc  4  97 1>, <&iomuxc  5 105 1>,
+					      <&iomuxc  6  98 1>, <&iomuxc  7 106 1>,
+					      <&iomuxc  8  28 1>, <&iomuxc  9  27 1>,
+					      <&iomuxc 10  26 1>, <&iomuxc 11  29 1>,
+					      <&iomuxc 12  32 1>, <&iomuxc 13  31 1>,
+					      <&iomuxc 14  30 1>, <&iomuxc 15  33 1>,
+					      <&iomuxc 16  84 1>, <&iomuxc 17  79 2>,
+					      <&iomuxc 19  78 1>, <&iomuxc 20  76 1>,
+					      <&iomuxc 21  81 2>, <&iomuxc 23  75 1>,
+					      <&iomuxc 24  83 1>, <&iomuxc 25  74 1>,
+					      <&iomuxc 26  77 1>, <&iomuxc 27 159 1>,
+					      <&iomuxc 28 154 1>, <&iomuxc 29 157 1>,
+					      <&iomuxc 30 152 1>, <&iomuxc 31 156 1>;
 			};
 
 			gpio5: gpio@020ac000 {
@@ -419,6 +455,17 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc  0 158 1>, <&iomuxc  1 151 1>,
+					      <&iomuxc  2 155 1>, <&iomuxc  3 153 1>,
+					      <&iomuxc  4 150 1>, <&iomuxc  5 149 1>,
+					      <&iomuxc  6 144 1>, <&iomuxc  7 147 1>,
+					      <&iomuxc  8 142 1>, <&iomuxc  9 146 1>,
+					      <&iomuxc 10 148 1>, <&iomuxc 11 141 1>,
+					      <&iomuxc 12 145 1>, <&iomuxc 13 143 1>,
+					      <&iomuxc 14 140 1>, <&iomuxc 15 139 1>,
+					      <&iomuxc 16 164 2>, <&iomuxc 18 160 1>,
+					      <&iomuxc 19 162 1>, <&iomuxc 20 163 1>,
+					      <&iomuxc 21 161 1>;
 			};
 
 			kpp: kpp@020b8000 {
diff --git a/arch/arm/boot/dts/imx6sx-pinfunc.h b/arch/arm/boot/dts/imx6sx-pinfunc.h
index bb9c6b7..42c4c80 100644
--- a/arch/arm/boot/dts/imx6sx-pinfunc.h
+++ b/arch/arm/boot/dts/imx6sx-pinfunc.h
@@ -308,6 +308,20 @@
 #define MX6SX_PAD_ENET1_RX_CLK__VDEC_DEBUG_35                     0x008C 0x03D4 0x0000 0x8 0x0
 #define MX6SX_PAD_ENET1_RX_CLK__PCIE_CTRL_DEBUG_29                0x008C 0x03D4 0x0000 0x9 0x0
 #define MX6SX_PAD_ENET1_TX_CLK__ENET1_TX_CLK                      0x0090 0x03D8 0x0000 0x0 0x0
+/*
+ * SION bit is necessary for ENET1_REF_CLK1 (ENET2_REF_CLK2 untested) if it is
+ * used as clock output of IMX6SX_CLK_ENET_REF (ENET1_TX_CLK) to e.g. supply a
+ * PHY in RMII mode. This configuration is valid if:
+ *  - bit 1 in field IMX6SX_GPR1_FEC_CLOCK_PAD_DIR_MASK is set
+ *  - bit 1 in field IMX6SX_GPR1_FEC_CLOCK_MUX_SEL_MASK unset
+ * It seems to be a silicon bug that in this configuration ENET1_TX reference
+ * clock isn't provided automatically.  According to i.MX6SX reference manual
+ * (IOMUXC_GPR_GPR1 field descriptions: ENET1_CLK_SEL, Rev. 0 from 2/2015) it
+ * should be the case.
+ * So this might have unwanted side effects for other hardware units that are
+ * also connected to that pin and using respective function as input (e.g.
+ * UART1's DTR handling on MX6SX_PAD_ENET1_TX_CLK__UART1_DTR_B).
+ */
 #define MX6SX_PAD_ENET1_TX_CLK__ENET1_REF_CLK1                    0x0090 0x03D8 0x0760 0x1 0x1
 #define MX6SX_PAD_ENET1_TX_CLK__AUDMUX_AUD4_RXD                   0x0090 0x03D8 0x0644 0x2 0x1
 #define MX6SX_PAD_ENET1_TX_CLK__UART1_DTR_B                       0x0090 0x03D8 0x0000 0x3 0x0
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index 2863c52..1a473e8 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -159,6 +159,16 @@
 			arm,data-latency = <4 2 3>;
 		};
 
+		gpu: gpu@01800000 {
+			compatible = "vivante,gc";
+			reg = <0x01800000 0x4000>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks IMX6SX_CLK_GPU>,
+				 <&clks IMX6SX_CLK_GPU>,
+				 <&clks IMX6SX_CLK_GPU>;
+			clock-names = "bus", "core", "shader";
+		};
+
 		dma_apbh: dma-apbh@01804000 {
 			compatible = "fsl,imx6sx-dma-apbh", "fsl,imx28-dma-apbh";
 			reg = <0x01804000 0x2000>;
@@ -438,6 +448,7 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 5 26>;
 			};
 
 			gpio2: gpio@020a0000 {
@@ -449,6 +460,7 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 31 20>;
 			};
 
 			gpio3: gpio@020a4000 {
@@ -460,6 +472,7 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 51 29>;
 			};
 
 			gpio4: gpio@020a8000 {
@@ -471,6 +484,7 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 80 32>;
 			};
 
 			gpio5: gpio@020ac000 {
@@ -482,6 +496,7 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 112 24>;
 			};
 
 			gpio6: gpio@020b0000 {
@@ -493,6 +508,7 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 136 12>, <&iomuxc 12 158 11>;
 			};
 
 			gpio7: gpio@020b4000 {
@@ -504,6 +520,7 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 148 10>, <&iomuxc 10 169 2>;
 			};
 
 			kpp: kpp@020b8000 {
@@ -1273,4 +1290,9 @@
 			status = "disabled";
 		};
 	};
+
+	gpu-subsystem {
+		compatible = "fsl,imx-gpu-subsystem";
+		cores = <&gpu>;
+	};
 };
diff --git a/arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts b/arch/arm/boot/dts/imx6ul-geam-kit.dts
similarity index 63%
copy from arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts
copy to arch/arm/boot/dts/imx6ul-geam-kit.dts
index d594f40..4c4af76 100644
--- a/arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts
+++ b/arch/arm/boot/dts/imx6ul-geam-kit.dts
@@ -1,7 +1,6 @@
 /*
- * Device Tree Source for UniPhier PH1-sLD8 Reference Board
- *
- * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -9,21 +8,20 @@
  * whole.
  *
  *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
  *
- *     This file is distributed in the hope that it will be useful,
+ *     This file is distributed in the hope that it will be useful
  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- * Or, alternatively,
+ * Or, alternatively
  *
  *  b) Permission is hereby granted, free of charge, to any person
  *     obtaining a copy of this software and associated documentation
  *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
+ *     restriction, including without limitation the rights to use
  *     copy, modify, merge, publish, distribute, sublicense, and/or
  *     sell copies of the Software, and to permit persons to whom the
  *     Software is furnished to do so, subject to the following
@@ -32,74 +30,72 @@
  *     The above copyright notice and this permission notice shall be
  *     included in all copies or substantial portions of the Software.
  *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
-/include/ "uniphier-ph1-sld8.dtsi"
-/include/ "uniphier-ref-daughter.dtsi"
-/include/ "uniphier-support-card.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6ul-geam.dtsi"
 
 / {
-	model = "UniPhier PH1-sLD8 Reference Board";
-	compatible = "socionext,ph1-sld8-ref", "socionext,ph1-sld8";
+	model = "Engicam GEAM6UL";
+	compatible = "engicam,imx6ul-geam", "fsl,imx6ul";
+};
 
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x20000000>;
-	};
+&can1 {
+	status = "okay";
+};
 
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
+&can2 {
+	status = "okay";
+};
 
-	aliases {
-		serial0 = &serial0;
-		serial1 = &serial1;
-		serial2 = &serial2;
-		serial3 = &serial3;
-		i2c0 = &i2c0;
-		i2c1 = &i2c1;
-		i2c2 = &i2c2;
-		i2c3 = &i2c3;
+&lcdif {
+	display = <&display0>;
+	status = "okay";
+
+	display0: display {
+		bits-per-pixel = <16>;
+		bus-width = <18>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <28000000>;
+				hactive = <800>;
+				vactive = <480>;
+				hfront-porch = <30>;
+				hback-porch = <30>;
+				hsync-len = <64>;
+				vback-porch = <5>;
+				vfront-porch = <5>;
+				vsync-len = <20>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
 	};
 };
 
-&ethsc {
-	interrupts = <0 48 4>;
-};
-
-&serial0 {
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
 	status = "okay";
 };
 
-&serial2 {
-	status = "okay";
-};
-
-&serial3 {
-	status = "okay";
-};
-
-&i2c0 {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-};
-
-&usb1 {
-	status = "okay";
-};
-
-&usb2 {
+&tsc {
+	measure-delay-time = <0x1ffff>;
+	pre-charge-time = <0x1fff>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6ul-geam.dtsi b/arch/arm/boot/dts/imx6ul-geam.dtsi
new file mode 100644
index 0000000..64eb9ed
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-geam.dtsi
@@ -0,0 +1,361 @@
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx6ul.dtsi"
+
+/ {
+	memory {
+		reg = <0x80000000 0x08000000>;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_3p3v>;
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_3p3v>;
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy1>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+		};
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+		};
+	};
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock_frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcdif_dat
+		     &pinctrl_lcdif_ctrl>;
+	display = <&display0>;
+};
+
+&tsc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_tsc>;
+	xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	bus-width = <4>;
+	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b031
+		>;
+	};
+
+	pinctrl_enet2: enet2grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x1b0b0
+			MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
+			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15	0x1b0b0		/* ENET_nRST */
+			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b0b0
+			MX6UL_PAD_GPIO1_IO05__ENET2_REF_CLK2	0x4001b031
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX	0x1b020
+			MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX	0x1b020
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX	0x1b020
+			MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX	0x1b020
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpmi-nand {
+		fsl,pins = <
+			MX6UL_PAD_NAND_CLE__RAWNAND_CLE         0xb0b1
+			MX6UL_PAD_NAND_ALE__RAWNAND_ALE         0xb0b1
+			MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B       0xb0b1
+			MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0xb000
+			MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B     0xb0b1
+			MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B       0xb0b1
+			MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B       0xb0b1
+			MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00   0xb0b1
+			MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01   0xb0b1
+			MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02   0xb0b1
+			MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03   0xb0b1
+			MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04   0xb0b1
+			MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05   0xb0b1
+			MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06   0xb0b1
+			MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07   0xb0b1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
+			MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+			MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0
+			MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0
+		>;
+	};
+
+	pinctrl_lcdif_ctrl: lcdifctrlgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_CLK__LCDIF_CLK	    0x79
+			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE  0x79
+			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC    0x79
+			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC    0x79
+		>;
+	};
+
+	pinctrl_lcdif_dat: lcdifdatgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00  0x79
+			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01  0x79
+			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02  0x79
+			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03  0x79
+			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04  0x79
+			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05  0x79
+			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06  0x79
+			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07  0x79
+			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08  0x79
+			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09  0x79
+			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10  0x79
+			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11  0x79
+			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12  0x79
+			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13  0x79
+			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14  0x79
+			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15  0x79
+			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16  0x79
+			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17  0x79
+		>;
+	};
+
+	pinctrl_tsc: tscgrp {
+		fsl,pin = <
+			MX6UL_PAD_GPIO1_IO01__GPIO1_IO01	0xb0
+			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02	0xb0
+			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03	0xb0
+			MX6UL_PAD_GPIO1_IO04__GPIO1_IO04	0xb0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX	0x1b0b1
+			MX6UL_PAD_UART3_RX_DATA__UART2_DCE_RTS	0x1b0b1
+			MX6UL_PAD_UART3_TX_DATA__UART2_DCE_CTS	0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x17059
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x10059
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x170b9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x100b9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x170f9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x100f9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_VSYNC__USDHC2_CLK     0x17070
+			MX6UL_PAD_CSI_HSYNC__USDHC2_CMD     0x10070
+			MX6UL_PAD_CSI_DATA00__USDHC2_DATA0  0x17070
+			MX6UL_PAD_CSI_DATA01__USDHC2_DATA1  0x17070
+			MX6UL_PAD_CSI_DATA02__USDHC2_DATA2  0x17070
+			MX6UL_PAD_CSI_DATA03__USDHC2_DATA3  0x17070
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ul-pico-hobbit.dts b/arch/arm/boot/dts/imx6ul-pico-hobbit.dts
index 86f68fa..827d9e8 100644
--- a/arch/arm/boot/dts/imx6ul-pico-hobbit.dts
+++ b/arch/arm/boot/dts/imx6ul-pico-hobbit.dts
@@ -100,6 +100,18 @@
 		gpio = <&gpio1 6 0>;
 	};
 
+	reg_brcm: regulator-brcm {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 8 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_brcm_reg>;
+		regulator-name = "brcm_reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <200000>;
+	};
+
 	sound {
 		compatible = "fsl,imx-audio-sgtl5000";
 		model = "imx6ul-sgtl5000";
@@ -325,12 +337,27 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc2>;
 	no-1-8-v;
+	non-removable;
 	keep-power-in-suspend;
 	wakeup-source;
+	vmmc-supply = <&reg_brcm>;
 	status = "okay";
 };
 
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
 &iomuxc {
+	pinctrl_brcm_reg: brcmreggrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_DATA06__GPIO4_IO08	0x10b0	/* WL_REG_ON */
+			MX6UL_PAD_NAND_DATA04__GPIO4_IO06	0x10b0	/* WL_HOST_WAKE */
+		>;
+	};
+
 	pinctrl_enet2: enet2grp {
 		fsl,pins = <
 			MX6UL_PAD_ENET1_TX_DATA1__ENET2_MDIO	0x1b0b0
@@ -513,4 +540,10 @@
 			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x17059
 		>;
 	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY    0x30b0
+		>;
+	};
 };
diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
index 33b95d7..c5c05fd 100644
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul.dtsi
@@ -411,6 +411,8 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc  0 23 10>, <&iomuxc 10 17 6>,
+					      <&iomuxc 16 33 16>;
 			};
 
 			gpio2: gpio@020a0000 {
@@ -422,6 +424,7 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 49 16>, <&iomuxc 16 111 6>;
 			};
 
 			gpio3: gpio@020a4000 {
@@ -433,6 +436,7 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 65 29>;
 			};
 
 			gpio4: gpio@020a8000 {
@@ -444,6 +448,7 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 94 17>, <&iomuxc 17 117 12>;
 			};
 
 			gpio5: gpio@020ac000 {
@@ -455,6 +460,7 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 7 10>, <&iomuxc 10 5 2>;
 			};
 
 			fec2: ethernet@020b4000 {
@@ -644,7 +650,8 @@
 			};
 
 			gpr: iomuxc-gpr@020e4000 {
-				compatible = "fsl,imx6ul-iomuxc-gpr", "syscon";
+				compatible = "fsl,imx6ul-iomuxc-gpr",
+					     "fsl,imx6q-iomuxc-gpr", "syscon";
 				reg = <0x020e4000 0x4000>;
 			};
 
diff --git a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
index 1545661..373ee19 100644
--- a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
@@ -138,10 +138,6 @@
 };
 
 &usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_cd_usdhc1>;
-	no-1-8-v;
-	cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
 	keep-power-in-suspend;
 	wakeup-source;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi
index 0a9d3a8..a9cc657 100644
--- a/arch/arm/boot/dts/imx7-colibri.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri.dtsi
@@ -46,12 +46,18 @@
 		pwms = <&pwm1 0 5000000>;
 	};
 
-	reg_3p3v: regulator-3p3v {
+	reg_module_3v3: regulator-module-3v3 {
 		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
+		regulator-name = "+V3.3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
+	};
+
+	reg_module_3v3_avdd: regulator-module-3v3-avdd {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3_AVDD_AUDIO";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
 	};
 
 	reg_vref_1v8: regulator-vref-1v8 {
@@ -60,6 +66,22 @@
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "imx7-sgtl5000";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,cpu {
+			sound-dai = <&sai1>;
+		};
+
+		dailink_master: simple-audio-card,codec {
+			sound-dai = <&codec>;
+			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		};
+	};
 };
 
 &adc1 {
@@ -97,6 +119,18 @@
 	pinctrl-0 = <&pinctrl_i2c1 &pinctrl_i2c1_int>;
 	status = "okay";
 
+	codec: sgtl5000@0a {
+		compatible = "fsl,sgtl5000";
+		#sound-dai-cells = <0>;
+		reg = <0x0a>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sai1_mclk>;
+		VDDA-supply = <&reg_module_3v3_avdd>;
+		VDDIO-supply = <&reg_module_3v3>;
+		VDDD-supply = <&reg_DCDC3>;
+	};
+
 	ad7879@2c {
 		compatible = "adi,ad7879-1";
 		reg = <0x2c>;
@@ -217,6 +251,12 @@
 	vin-supply = <&reg_DCDC3>;
 };
 
+&sai1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai1>;
+	status = "okay";
+};
+
 &snvs_pwrkey {
 	status = "disabled";
 };
@@ -251,6 +291,14 @@
 	dr_mode = "host";
 };
 
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_cd_usdhc1>;
+	no-1-8-v;
+	cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+	disable-wp;
+};
+
 &iomuxc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3 &pinctrl_gpio4>;
@@ -528,13 +576,18 @@
 
 	pinctrl_sai1: sai1-grp {
 		fsl,pins = <
-			MX7D_PAD_SAI1_MCLK__SAI1_MCLK           0x1f
 			MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK     0x1f
 			MX7D_PAD_SAI1_TX_SYNC__SAI1_TX_SYNC	0x1f
 			MX7D_PAD_ENET1_COL__SAI1_TX_DATA0	0x30
 			MX7D_PAD_ENET1_TX_CLK__SAI1_RX_DATA0	0x1f
 		>;
 	};
+
+	pinctrl_sai1_mclk: sai1grp_mclk {
+		fsl,pins = <
+			MX7D_PAD_SAI1_MCLK__SAI1_MCLK           0x1f
+		>;
+	};
 };
 
 &iomuxc_lpsr {
diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
index 51c13cb..f6dee41 100644
--- a/arch/arm/boot/dts/imx7d.dtsi
+++ b/arch/arm/boot/dts/imx7d.dtsi
@@ -45,30 +45,42 @@
 
 / {
 	cpus {
+		cpu0: cpu@0 {
+			operating-points = <
+				/* KHz	uV */
+				996000	1075000
+				792000	975000
+			>;
+			clock-frequency = <996000000>;
+		};
+
 		cpu1: cpu@1 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <1>;
+			clock-frequency = <996000000>;
 		};
 	};
 
-	etm@3007d000 {
-		compatible = "arm,coresight-etm3x", "arm,primecell";
-		reg = <0x3007d000 0x1000>;
+	soc {
+		etm@3007d000 {
+			compatible = "arm,coresight-etm3x", "arm,primecell";
+			reg = <0x3007d000 0x1000>;
 
-		/*
-		 * System will hang if added nosmp in kernel command line
-		 * without arm,primecell-periphid because amba bus try to
-		 * read id and core1 power off at this time.
-		 */
-		arm,primecell-periphid = <0xbb956>;
-		cpu = <&cpu1>;
-		clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
-		clock-names = "apb_pclk";
+			/*
+			 * System will hang if added nosmp in kernel command line
+			 * without arm,primecell-periphid because amba bus try to
+			 * read id and core1 power off at this time.
+			 */
+			arm,primecell-periphid = <0xbb956>;
+			cpu = <&cpu1>;
+			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+			clock-names = "apb_pclk";
 
-		port {
-			etm1_out_port: endpoint {
-				remote-endpoint = <&ca_funnel_in_port1>;
+			port {
+				etm1_out_port: endpoint {
+					remote-endpoint = <&ca_funnel_in_port1>;
+				};
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/imx7s-warp.dts b/arch/arm/boot/dts/imx7s-warp.dts
new file mode 100644
index 0000000..0345267
--- /dev/null
+++ b/arch/arm/boot/dts/imx7s-warp.dts
@@ -0,0 +1,446 @@
+/*
+ * Copyright (C) 2016 NXP Semiconductors.
+ * Author: Fabio Estevam <fabio.estevam@nxp.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "imx7s.dtsi"
+
+/ {
+	model = "Warp i.MX7 Board";
+	compatible = "warp,imx7s-warp", "fsl,imx7s";
+
+	memory {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pinctrl_gpio>;
+		autorepeat;
+
+		back {
+			label = "Back";
+			gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_BACK>;
+			wakeup-source;
+		};
+	};
+
+	reg_brcm: regulator-brcm {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_brcm_reg>;
+		regulator-name = "brcm_reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <200000>;
+	};
+
+	reg_bt: regulator-bt {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_bt_reg>;
+		enable-active-high;
+		gpio = <&gpio5 17 GPIO_ACTIVE_HIGH>;
+		regulator-name = "bt_reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "imx7-sgtl5000";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,cpu {
+			sound-dai = <&sai1>;
+		};
+
+		dailink_master: simple-audio-card,codec {
+			sound-dai = <&codec>;
+			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		};
+	};
+};
+
+&clks {
+	assigned-clocks = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
+	assigned-clock-rates = <884736000>;
+};
+
+&cpu0 {
+	arm-supply = <&sw1a_reg>;
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic: pfuze3000@08 {
+		compatible = "fsl,pfuze3000";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1a {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1475000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			/* use sw1c_reg to align with pfuze100/pfuze200 */
+			sw1c_reg: sw1b {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1475000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vldo2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vccsd {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: v33 {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vldo3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vldo4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	codec: sgtl5000@0a {
+		#sound-dai-cells = <0>;
+		reg = <0x0a>;
+		compatible = "fsl,sgtl5000";
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sai1_mclk>;
+		VDDA-supply = <&vgen4_reg>;
+		VDDIO-supply = <&vgen4_reg>;
+		VDDD-supply = <&vgen2_reg>;
+	};
+
+	mpl3115@60 {
+		compatible = "fsl,mpl3115";
+		reg = <0x60>;
+	};
+};
+
+&sai1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai1>;
+	assigned-clocks = <&clks IMX7D_SAI1_ROOT_SRC>,
+			  <&clks IMX7D_SAI1_ROOT_CLK>;
+	assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
+	assigned-clock-rates = <0>, <36864000>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+	status = "okay";
+};
+
+&uart3  {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	assigned-clocks = <&clks IMX7D_UART3_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	bus-width = <4>;
+	keep-power-in-suspend;
+	no-1-8-v;
+	non-removable;
+	vmmc-supply = <&reg_brcm>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
+	assigned-clock-rates = <400000000>;
+	bus-width = <8>;
+	fsl,tuning-step = <2>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_brcm_reg: brcmreggrp {
+		fsl,pins = <
+			MX7D_PAD_SD2_WP__GPIO5_IO10	0x14 /* WL_REG_ON */
+		>;
+	};
+
+	pinctrl_bt_reg: btreggrp {
+		fsl,pins = <
+			MX7D_PAD_SD2_DATA3__GPIO5_IO17	0x14 /* BT_REG_ON */
+		>;
+	};
+
+	pinctrl_gpio: gpiogrp {
+		fsl,pins = <
+			MX7D_PAD_ENET1_RGMII_RD1__GPIO7_IO1	0x14
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX7D_PAD_I2C1_SDA__I2C1_SDA		0x4000007f
+			MX7D_PAD_I2C1_SCL__I2C1_SCL		0x4000007f
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX7D_PAD_I2C2_SDA__I2C2_SDA	0x4000007f
+			MX7D_PAD_I2C2_SCL__I2C2_SCL	0x4000007f
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX7D_PAD_I2C4_SCL__I2C4_SCL	0x4000007f
+			MX7D_PAD_I2C4_SDA__I2C4_SDA	0x4000007f
+		>;
+	};
+
+	pinctrl_sai1: sai1grp {
+		fsl,pins = <
+			MX7D_PAD_SAI1_RX_DATA__SAI1_RX_DATA0	0x1f
+			MX7D_PAD_SAI1_TX_BCLK__SAI1_TX_BCLK	0x1f
+			MX7D_PAD_SAI1_TX_SYNC__SAI1_TX_SYNC	0x1f
+			MX7D_PAD_SAI1_TX_DATA__SAI1_TX_DATA0	0x30
+		>;
+	};
+
+	pinctrl_sai1_mclk: sai1mclkgrp {
+		fsl,pins = <
+			MX7D_PAD_SAI1_MCLK__SAI1_MCLK           0x1f
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX	0x79
+			MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX	0x79
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX7D_PAD_UART3_TX_DATA__UART3_DCE_TX	0x79
+			MX7D_PAD_UART3_RX_DATA__UART3_DCE_RX	0x79
+			MX7D_PAD_UART3_CTS_B__UART3_DCE_CTS	0x79
+			MX7D_PAD_UART3_RTS_B__UART3_DCE_RTS	0x79
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX7D_PAD_SD1_CMD__SD1_CMD	0x59
+			MX7D_PAD_SD1_CLK__SD1_CLK	0x19
+			MX7D_PAD_SD1_DATA0__SD1_DATA0	0x59
+			MX7D_PAD_SD1_DATA1__SD1_DATA1	0x59
+			MX7D_PAD_SD1_DATA2__SD1_DATA2	0x59
+			MX7D_PAD_SD1_DATA3__SD1_DATA3	0x59
+			MX7D_PAD_SD2_RESET_B__GPIO5_IO11 0x14 /* WL_HOST_WAKE */
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x59
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x19
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x59
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x59
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x59
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x59
+			MX7D_PAD_SD3_RESET_B__SD3_RESET_B	0x19
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x5a
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x1a
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5a
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5a
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5a
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5a
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5a
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5a
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5a
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5a
+			MX7D_PAD_SD3_RESET_B__SD3_RESET_B	0x1a
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x5b
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x1b
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5b
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5b
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5b
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5b
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5b
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5b
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5b
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5b
+			MX7D_PAD_SD3_RESET_B__SD3_RESET_B	0x1b
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO00__WDOD1_WDOG_B	0x74
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
index 1e90bdb..0d7d5ac 100644
--- a/arch/arm/boot/dts/imx7s.dtsi
+++ b/arch/arm/boot/dts/imx7s.dtsi
@@ -85,26 +85,12 @@
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <0>;
-			operating-points = <
-				/* KHz	uV */
-				996000	1075000
-				792000	975000
-			>;
+			clock-frequency = <792000000>;
 			clock-latency = <61036>; /* two CLK32 periods */
 			clocks = <&clks IMX7D_CLK_ARM>;
 		};
 	};
 
-	intc: interrupt-controller@31001000 {
-		compatible = "arm,cortex-a7-gic";
-		#interrupt-cells = <3>;
-		interrupt-controller;
-		reg = <0x31001000 0x1000>,
-		      <0x31002000 0x1000>,
-		      <0x31004000 0x2000>,
-		      <0x31006000 0x2000>;
-	};
-
 	ckil: clock-cki {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
@@ -119,189 +105,6 @@
 		clock-output-names = "osc";
 	};
 
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
-		interrupt-parent = <&intc>;
-	};
-
-	etr@30086000 {
-		compatible = "arm,coresight-tmc", "arm,primecell";
-		reg = <0x30086000 0x1000>;
-		clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
-		clock-names = "apb_pclk";
-
-		port {
-			etr_in_port: endpoint {
-				slave-mode;
-				remote-endpoint = <&replicator_out_port1>;
-			};
-		};
-	};
-
-	tpiu@30087000 {
-		compatible = "arm,coresight-tpiu", "arm,primecell";
-		reg = <0x30087000 0x1000>;
-		clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
-		clock-names = "apb_pclk";
-
-		port {
-			tpiu_in_port: endpoint {
-				slave-mode;
-				remote-endpoint = <&replicator_out_port1>;
-			};
-		};
-	};
-
-	replicator {
-		/*
-		 * non-configurable replicators don't show up on the
-		 * AMBA bus.  As such no need to add "arm,primecell"
-		 */
-		compatible = "arm,coresight-replicator";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			/* replicator output ports */
-			port@0 {
-				reg = <0>;
-				replicator_out_port0: endpoint {
-					remote-endpoint = <&tpiu_in_port>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-				replicator_out_port1: endpoint {
-					remote-endpoint = <&etr_in_port>;
-				};
-			};
-
-			/* replicator input port */
-			port@2 {
-				reg = <0>;
-				replicator_in_port0: endpoint {
-					slave-mode;
-					remote-endpoint = <&etf_out_port>;
-				};
-			};
-		};
-	};
-
-	etf@30084000 {
-		compatible = "arm,coresight-tmc", "arm,primecell";
-		reg = <0x30084000 0x1000>;
-		clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
-		clock-names = "apb_pclk";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				etf_in_port: endpoint {
-					slave-mode;
-					remote-endpoint = <&hugo_funnel_out_port0>;
-				};
-			};
-
-			port@1 {
-				reg = <0>;
-				etf_out_port: endpoint {
-					remote-endpoint = <&replicator_in_port0>;
-				};
-			};
-		};
-	};
-
-	funnel@30083000 {
-		compatible = "arm,coresight-funnel", "arm,primecell";
-		reg = <0x30083000 0x1000>;
-		clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
-		clock-names = "apb_pclk";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			/* funnel input ports */
-			port@0 {
-				reg = <0>;
-				hugo_funnel_in_port0: endpoint {
-					slave-mode;
-					remote-endpoint = <&ca_funnel_out_port0>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-				hugo_funnel_in_port1: endpoint {
-					slave-mode; /* M4 input */
-				};
-			};
-
-			port@2 {
-				reg = <0>;
-				hugo_funnel_out_port0: endpoint {
-					remote-endpoint = <&etf_in_port>;
-				};
-			};
-
-			/* the other input ports are not connect to anything */
-		};
-	};
-
-	funnel@30041000 {
-		compatible = "arm,coresight-funnel", "arm,primecell";
-		reg = <0x30041000 0x1000>;
-		clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
-		clock-names = "apb_pclk";
-
-		ca_funnel_ports: ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			/* funnel input ports */
-			port@0 {
-				reg = <0>;
-				ca_funnel_in_port0: endpoint {
-					slave-mode;
-					remote-endpoint = <&etm0_out_port>;
-				};
-			};
-
-			/* funnel output port */
-			port@2 {
-				reg = <0>;
-				ca_funnel_out_port0: endpoint {
-					remote-endpoint = <&hugo_funnel_in_port0>;
-				};
-			};
-
-			/* the other input ports are not connect to anything */
-		};
-	};
-
-	etm@3007c000 {
-		compatible = "arm,coresight-etm3x", "arm,primecell";
-		reg = <0x3007c000 0x1000>;
-		cpu = <&cpu0>;
-		clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
-		clock-names = "apb_pclk";
-
-		port {
-			etm0_out_port: endpoint {
-				remote-endpoint = <&ca_funnel_in_port0>;
-			};
-		};
-	};
-
 	soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -309,6 +112,199 @@
 		interrupt-parent = <&intc>;
 		ranges;
 
+		funnel@30041000 {
+			compatible = "arm,coresight-funnel", "arm,primecell";
+			reg = <0x30041000 0x1000>;
+			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+			clock-names = "apb_pclk";
+
+			ca_funnel_ports: ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				/* funnel input ports */
+				port@0 {
+					reg = <0>;
+					ca_funnel_in_port0: endpoint {
+						slave-mode;
+						remote-endpoint = <&etm0_out_port>;
+					};
+				};
+
+				/* funnel output port */
+				port@2 {
+					reg = <0>;
+					ca_funnel_out_port0: endpoint {
+						remote-endpoint = <&hugo_funnel_in_port0>;
+					};
+				};
+
+				/* the other input ports are not connect to anything */
+			};
+		};
+
+		etm@3007c000 {
+			compatible = "arm,coresight-etm3x", "arm,primecell";
+			reg = <0x3007c000 0x1000>;
+			cpu = <&cpu0>;
+			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+			clock-names = "apb_pclk";
+
+			port {
+				etm0_out_port: endpoint {
+					remote-endpoint = <&ca_funnel_in_port0>;
+				};
+			};
+		};
+
+		funnel@30083000 {
+			compatible = "arm,coresight-funnel", "arm,primecell";
+			reg = <0x30083000 0x1000>;
+			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+			clock-names = "apb_pclk";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				/* funnel input ports */
+				port@0 {
+					reg = <0>;
+					hugo_funnel_in_port0: endpoint {
+						slave-mode;
+						remote-endpoint = <&ca_funnel_out_port0>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					hugo_funnel_in_port1: endpoint {
+						slave-mode; /* M4 input */
+					};
+				};
+
+				port@2 {
+					reg = <0>;
+					hugo_funnel_out_port0: endpoint {
+						remote-endpoint = <&etf_in_port>;
+					};
+				};
+
+				/* the other input ports are not connect to anything */
+			};
+		};
+
+		etf@30084000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0x30084000 0x1000>;
+			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+			clock-names = "apb_pclk";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					etf_in_port: endpoint {
+						slave-mode;
+						remote-endpoint = <&hugo_funnel_out_port0>;
+					};
+				};
+
+				port@1 {
+					reg = <0>;
+					etf_out_port: endpoint {
+						remote-endpoint = <&replicator_in_port0>;
+					};
+				};
+			};
+		};
+
+		etr@30086000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0x30086000 0x1000>;
+			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+			clock-names = "apb_pclk";
+
+			port {
+				etr_in_port: endpoint {
+					slave-mode;
+					remote-endpoint = <&replicator_out_port1>;
+				};
+			};
+		};
+
+		tpiu@30087000 {
+			compatible = "arm,coresight-tpiu", "arm,primecell";
+			reg = <0x30087000 0x1000>;
+			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+			clock-names = "apb_pclk";
+
+			port {
+				tpiu_in_port: endpoint {
+					slave-mode;
+					remote-endpoint = <&replicator_out_port1>;
+				};
+			};
+		};
+
+		replicator {
+			/*
+			 * non-configurable replicators don't show up on the
+			 * AMBA bus.  As such no need to add "arm,primecell"
+			 */
+			compatible = "arm,coresight-replicator";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				/* replicator output ports */
+				port@0 {
+					reg = <0>;
+					replicator_out_port0: endpoint {
+						remote-endpoint = <&tpiu_in_port>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					replicator_out_port1: endpoint {
+						remote-endpoint = <&etr_in_port>;
+					};
+				};
+
+				/* replicator input port */
+				port@2 {
+					reg = <0>;
+					replicator_in_port0: endpoint {
+						slave-mode;
+						remote-endpoint = <&etf_out_port>;
+					};
+				};
+			};
+		};
+
+		intc: interrupt-controller@31001000 {
+			compatible = "arm,cortex-a7-gic";
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x31001000 0x1000>,
+			      <0x31002000 0x2000>,
+			      <0x31004000 0x2000>,
+			      <0x31006000 0x2000>;
+		};
+
+		timer {
+			compatible = "arm,armv7-timer";
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		};
+
 		aips1: aips-bus@30000000 {
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
@@ -325,6 +321,7 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc_lpsr 0 0 8>, <&iomuxc 8 5 8>;
 			};
 
 			gpio2: gpio@30210000 {
@@ -336,6 +333,7 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 13 32>;
 			};
 
 			gpio3: gpio@30220000 {
@@ -347,6 +345,7 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 45 29>;
 			};
 
 			gpio4: gpio@30230000 {
@@ -358,6 +357,7 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 74 24>;
 			};
 
 			gpio5: gpio@30240000 {
@@ -369,6 +369,7 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 98 18>;
 			};
 
 			gpio6: gpio@30250000 {
@@ -380,6 +381,7 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 116 23>;
 			};
 
 			gpio7: gpio@30260000 {
@@ -391,6 +393,7 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 139 16>;
 			};
 
 			wdog1: wdog@30280000 {
@@ -723,6 +726,51 @@
 				status = "disabled";
 			};
 
+			sai1: sai@308a0000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx7d-sai", "fsl,imx6sx-sai";
+				reg = <0x308a0000 0x10000>;
+				interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_SAI1_IPG_CLK>,
+					 <&clks IMX7D_SAI1_ROOT_CLK>,
+					 <&clks IMX7D_CLK_DUMMY>,
+					 <&clks IMX7D_CLK_DUMMY>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dma-names = "rx", "tx";
+				dmas = <&sdma 8 24 0>, <&sdma 9 24 0>;
+				status = "disabled";
+			};
+
+			sai2: sai@308b0000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx7d-sai", "fsl,imx6sx-sai";
+				reg = <0x308b0000 0x10000>;
+				interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_SAI2_IPG_CLK>,
+					 <&clks IMX7D_SAI2_ROOT_CLK>,
+					 <&clks IMX7D_CLK_DUMMY>,
+					 <&clks IMX7D_CLK_DUMMY>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dma-names = "rx", "tx";
+				dmas = <&sdma 10 24 0>, <&sdma 11 24 0>;
+				status = "disabled";
+			};
+
+			sai3: sai@308c0000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx7d-sai", "fsl,imx6sx-sai";
+				reg = <0x308c0000 0x10000>;
+				interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_SAI3_IPG_CLK>,
+					 <&clks IMX7D_SAI3_ROOT_CLK>,
+					 <&clks IMX7D_CLK_DUMMY>,
+					 <&clks IMX7D_CLK_DUMMY>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dma-names = "rx", "tx";
+				dmas = <&sdma 12 24 0>, <&sdma 13 24 0>;
+				status = "disabled";
+			};
+
 			flexcan1: can@30a00000 {
 				compatible = "fsl,imx7d-flexcan", "fsl,imx6q-flexcan";
 				reg = <0x30a00000 0x10000>;
@@ -911,6 +959,17 @@
 				status = "disabled";
 			};
 
+			sdma: sdma@30bd0000 {
+				compatible = "fsl,imx7d-sdma", "fsl,imx35-sdma";
+				reg = <0x30bd0000 0x10000>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_SDMA_CORE_CLK>,
+					 <&clks IMX7D_AHB_CHANNEL_ROOT_CLK>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
+			};
+
 			fec1: ethernet@30be0000 {
 				compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec";
 				reg = <0x30be0000 0x10000>;
diff --git a/arch/arm/boot/dts/integratorap.dts b/arch/arm/boot/dts/integratorap.dts
index 4b34b54..6f16d09 100644
--- a/arch/arm/boot/dts/integratorap.dts
+++ b/arch/arm/boot/dts/integratorap.dts
@@ -19,7 +19,7 @@
 		bootargs = "root=/dev/ram0 console=ttyAM0,38400n8 earlyprintk";
 	};
 
-	/* 24 MHz chrystal on the core module */
+	/* 24 MHz chrystal on the Integrator/AP development board */
 	xtal24mhz: xtal24mhz@24M {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
@@ -39,6 +39,34 @@
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <14745600>;
+		clocks = <&xtal24mhz>;
+	};
+
+	core-module@10000000 {
+		/* 24 MHz chrystal on the core module */
+		cm24mhz: cm24mhz@24M {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+		};
+
+		/* Oscillator on the core module, clocks the CPU core */
+		cmosc: cmosc@24M {
+			compatible = "arm,syscon-icst525-integratorap-cm";
+			#clock-cells = <0>;
+			lock-offset = <0x14>;
+			vco-offset = <0x08>;
+			clocks = <&cm24mhz>;
+		};
+
+		/* Auxilary oscillator on the core module, 32.369MHz at boot */
+		auxosc: auxosc@24M {
+			compatible = "arm,syscon-icst525";
+			#clock-cells = <0>;
+			lock-offset = <0x14>;
+			vco-offset = <0x1c>;
+			clocks = <&cm24mhz>;
+		};
 	};
 
 	syscon {
@@ -47,6 +75,27 @@
 		interrupt-parent = <&pic>;
 		/* These are the logical module IRQs */
 		interrupts = <9>, <10>, <11>, <12>;
+
+		/*
+		 * SYSCLK clocks PCIv3 bridge, system controller and the
+		 * logic modules.
+		 */
+		sysclk: apsys@24M {
+			compatible = "arm,syscon-icst525-integratorap-sys";
+			#clock-cells = <0>;
+			lock-offset = <0x1c>;
+			vco-offset = <0x04>;
+			clocks = <&xtal24mhz>;
+		};
+
+		/* One-bit control for the PCI bus clock (33 or 25 MHz) */
+		pciclk: pciclk@24M {
+			compatible = "arm,syscon-icst525-integratorap-pci";
+			#clock-cells = <0>;
+			lock-offset = <0x1c>;
+			vco-offset = <0x04>;
+			clocks = <&xtal24mhz>;
+		};
 	};
 
 	timer0: timer@13000000 {
diff --git a/arch/arm/boot/dts/integratorcp.dts b/arch/arm/boot/dts/integratorcp.dts
index 79430fb..1b5e4b0 100644
--- a/arch/arm/boot/dts/integratorcp.dts
+++ b/arch/arm/boot/dts/integratorcp.dts
@@ -58,20 +58,37 @@
 
 	core-module@10000000 {
 		/* 24 MHz chrystal on the core module */
-		xtal24mhz: xtal24mhz@24M {
+		cm24mhz: cm24mhz@24M {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <24000000>;
 		};
 
-		/*
-		 * External oscillator on the core module, usually used
-		 * to drive video circuitry. Driven from the 24MHz clock.
-		 */
-		auxosc: cm_aux_osc@25M {
+		/* Oscillator on the core module, clocks the CPU core */
+		cmcore: cmosc@24M {
+			compatible = "arm,syscon-icst525-integratorcp-cm-core";
 			#clock-cells = <0>;
-			compatible = "arm,integrator-cm-auxosc";
-			clocks = <&xtal24mhz>;
+			lock-offset = <0x14>;
+			vco-offset = <0x08>;
+			clocks = <&cm24mhz>;
+		};
+
+		/* Oscillator on the core module, clocks the memory bus */
+		cmmem: cmosc@24M {
+			compatible = "arm,syscon-icst525-integratorcp-cm-mem";
+			#clock-cells = <0>;
+			lock-offset = <0x14>;
+			vco-offset = <0x08>;
+			clocks = <&cm24mhz>;
+		};
+
+		/* Auxilary oscillator on the core module, clocks the CLCD */
+		auxosc: auxosc@24M {
+			compatible = "arm,syscon-icst525";
+			#clock-cells = <0>;
+			lock-offset = <0x14>;
+			vco-offset = <0x1c>;
+			clocks = <&cm24mhz>;
 		};
 
 		/* The KMI clock is the 24 MHz oscillator divided to 8MHz */
@@ -80,7 +97,7 @@
 			compatible = "fixed-factor-clock";
 			clock-div = <3>;
 			clock-mult = <1>;
-			clocks = <&xtal24mhz>;
+			clocks = <&cm24mhz>;
 		};
 
 		/* The timer clock is the 24 MHz oscillator divided to 1MHz */
@@ -89,7 +106,7 @@
 			compatible = "fixed-factor-clock";
 			clock-div = <24>;
 			clock-mult = <1>;
-			clocks = <&xtal24mhz>;
+			clocks = <&cm24mhz>;
 		};
 	};
 
@@ -209,7 +226,42 @@
 			reg = <0xC0000000 0x1000>;
 			interrupts = <22>;
 			clocks = <&auxosc>, <&pclk>;
-			clock-names = "clcd", "apb_pclk";
+			clock-names = "clcdclk", "apb_pclk";
+
+			port {
+				/*
+				 * The VGA connected is implemented with a
+				 * THS8134A triple DAC that can be run in 24bit
+				 * or 16bit RGB mode.
+				 */
+				clcd_pads: endpoint {
+					remote-endpoint = <&clcd_panel>;
+					arm,pl11x,tft-r0g0b0-pads = <1 7 13>;
+				};
+			};
+
+			panel {
+				compatible = "panel-dpi";
+
+				port {
+					clcd_panel: endpoint {
+						remote-endpoint = <&clcd_pads>;
+					};
+				};
+
+				/* Standard 640x480 VGA timings */
+				panel-timing {
+					clock-frequency = <25175000>;
+					hactive = <640>;
+					hback-porch = <48>;
+					hfront-porch = <16>;
+					hsync-len = <96>;
+					vactive = <480>;
+					vback-porch = <33>;
+					vfront-porch = <10>;
+					vsync-len = <2>;
+				};
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/keystone-k2e-evm.dts b/arch/arm/boot/dts/keystone-k2e-evm.dts
index 4c32ebc..ae1ebe7 100644
--- a/arch/arm/boot/dts/keystone-k2e-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2e-evm.dts
@@ -47,18 +47,26 @@
 	status = "okay";
 };
 
-&usb {
+&keystone_usb0 {
 	status = "okay";
 };
 
+&usb0 {
+	dr_mode = "host";
+};
+
 &usb1_phy {
 	status = "okay";
 };
 
-&usb1 {
+&keystone_usb1 {
 	status = "okay";
 };
 
+&usb1 {
+	dr_mode = "peripheral";
+};
+
 &i2c0 {
 	dtt@50 {
 		compatible = "at,24c1024";
diff --git a/arch/arm/boot/dts/keystone-k2e.dtsi b/arch/arm/boot/dts/keystone-k2e.dtsi
index 9a51b8c..497c417 100644
--- a/arch/arm/boot/dts/keystone-k2e.dtsi
+++ b/arch/arm/boot/dts/keystone-k2e.dtsi
@@ -61,7 +61,7 @@
 			status = "disabled";
 		};
 
-		usb1: usb@25000000 {
+		keystone_usb1: usb@25000000 {
 			compatible = "ti,keystone-dwc3";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -74,7 +74,7 @@
 			dma-ranges;
 			status = "disabled";
 
-			dwc3@25010000 {
+			usb1: dwc3@25010000 {
 				compatible = "synopsys,dwc3";
 				reg = <0x25010000 0x70000>;
 				interrupts = <GIC_SPI 414 IRQ_TYPE_EDGE_RISING>;
diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/keystone-k2g.dtsi
index 3372615..2919c519 100644
--- a/arch/arm/boot/dts/keystone-k2g.dtsi
+++ b/arch/arm/boot/dts/keystone-k2g.dtsi
@@ -83,6 +83,11 @@
 			pinctrl-single,function-mask = <0x001b0007>;
 		};
 
+		devctrl: device-state-control@02620000 {
+			compatible = "ti,keystone-devctrl", "syscon";
+			reg = <0x02620000 0x1000>;
+		};
+
 		uart0: serial@02530c00 {
 			compatible = "ns16550a";
 			current-speed = <115200>;
@@ -93,5 +98,32 @@
 			clock-frequency = <200000000>;
 			status = "disabled";
 		};
+
+		kirq0: keystone_irq@026202a0 {
+			compatible = "ti,keystone-irq";
+			interrupts = <GIC_SPI 1 IRQ_TYPE_EDGE_RISING>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			ti,syscon-dev = <&devctrl 0x2a0>;
+		};
+
+		dspgpio0: keystone_dsp_gpio@02620240 {
+			compatible = "ti,keystone-dsp-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio,syscon-dev = <&devctrl 0x240>;
+		};
+
+		msgmgr: msgmgr@02a00000 {
+			compatible = "ti,k2g-message-manager";
+			#mbox-cells = <2>;
+			reg-names = "queue_proxy_region",
+				    "queue_state_debug_region";
+			reg = <0x02a00000 0x400000>, <0x028c3400 0x400>;
+			interrupt-names = "rx_005",
+					  "rx_057";
+			interrupts = <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/keystone-k2hk-evm.dts b/arch/arm/boot/dts/keystone-k2hk-evm.dts
index b38b344..2156ff9 100644
--- a/arch/arm/boot/dts/keystone-k2hk-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2hk-evm.dts
@@ -83,10 +83,14 @@
 	status = "okay";
 };
 
-&usb {
+&keystone_usb0 {
 	status = "okay";
 };
 
+&usb0 {
+	dr_mode = "host";
+};
+
 &aemif {
 	cs0 {
 		#address-cells = <2>;
diff --git a/arch/arm/boot/dts/keystone-k2l-evm.dts b/arch/arm/boot/dts/keystone-k2l-evm.dts
index 7f9c2e9..056b42f 100644
--- a/arch/arm/boot/dts/keystone-k2l-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2l-evm.dts
@@ -32,10 +32,14 @@
 	status = "okay";
 };
 
-&usb {
+&keystone_usb0 {
 	status = "okay";
 };
 
+&usb0 {
+	dr_mode = "host";
+};
+
 &i2c0 {
 	dtt@50 {
 		compatible = "at,24c1024";
diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi
index e23f46d..02708ba 100644
--- a/arch/arm/boot/dts/keystone.dtsi
+++ b/arch/arm/boot/dts/keystone.dtsi
@@ -188,7 +188,7 @@
 			status = "disabled";
 		};
 
-		usb: usb@2680000 {
+		keystone_usb0: usb@2680000 {
 			compatible = "ti,keystone-dwc3";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -201,7 +201,7 @@
 			dma-ranges;
 			status = "disabled";
 
-			dwc3@2690000 {
+			usb0: dwc3@2690000 {
 				compatible = "synopsys,dwc3";
 				reg = <0x2690000 0x70000>;
 				interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>;
diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
index 0db0e3e..94e49f3 100644
--- a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
+++ b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
@@ -41,7 +41,7 @@
 		};
 
 		pinctrl: pin-controller@10000 {
-			pinctrl-0 = <&pmx_dip_switches &pmx_gpio_header>;
+			pinctrl-0 = <&pmx_dip_switches>;
 			pinctrl-names = "default";
 
 			pmx_uart0: pmx-uart0 {
@@ -174,3 +174,10 @@
 		phy-handle = <&ethphy0>;
 	};
 };
+
+&gpio0 {
+	status = "okay";
+
+	pinctrl-0 = <&pmx_gpio_header>;
+	pinctrl-names = "default";
+};
diff --git a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi
index 1c2c746..731ec37 100644
--- a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi
+++ b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi
@@ -13,6 +13,11 @@
 		};
 	};
 
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0>;
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		user0 {
diff --git a/arch/arm/boot/dts/lpc18xx.dtsi b/arch/arm/boot/dts/lpc18xx.dtsi
index fdb736c..7cae9c5 100644
--- a/arch/arm/boot/dts/lpc18xx.dtsi
+++ b/arch/arm/boot/dts/lpc18xx.dtsi
@@ -20,6 +20,9 @@
 #define LPC_GPIO(port, pin)	(port * 32 + pin)
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -186,6 +189,10 @@
 			clock-names = "stmmaceth";
 			resets = <&rgu 22>;
 			reset-names = "stmmaceth";
+			rx-fifo-depth = <256>;
+			tx-fifo-depth = <256>;
+			snps,pbl = <4>; /* 32 (8x mode) */
+			snps,force_thresh_dma_mode;
 			status = "disabled";
 		};
 
diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi
index e295e1e..b5841fa 100644
--- a/arch/arm/boot/dts/lpc32xx.dtsi
+++ b/arch/arm/boot/dts/lpc32xx.dtsi
@@ -51,9 +51,19 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "simple-bus";
-		ranges = <0x20000000 0x20000000 0x30000000>,
+		ranges = <0x00000000 0x00000000 0x10000000>,
+			 <0x20000000 0x20000000 0x30000000>,
 			 <0xe0000000 0xe0000000 0x04000000>;
 
+		iram: sram@08000000 {
+			compatible = "mmio-sram";
+			reg = <0x08000000 0x20000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x00000000 0x08000000 0x20000>;
+		};
+
 		/*
 		 * Enable either SLC or MLC
 		 */
diff --git a/arch/arm/boot/dts/lpc4337-ciaa.dts b/arch/arm/boot/dts/lpc4337-ciaa.dts
index 5cfadb0..7c16d63 100644
--- a/arch/arm/boot/dts/lpc4337-ciaa.dts
+++ b/arch/arm/boot/dts/lpc4337-ciaa.dts
@@ -30,7 +30,7 @@
 		stdout-path = &uart2;
 	};
 
-	memory {
+	memory@28000000 {
 		device_type = "memory";
 		reg = <0x28000000 0x0800000>; /* 8 MB */
 	};
diff --git a/arch/arm/boot/dts/lpc4350-hitex-eval.dts b/arch/arm/boot/dts/lpc4350-hitex-eval.dts
index 6c9048d..874c75d 100644
--- a/arch/arm/boot/dts/lpc4350-hitex-eval.dts
+++ b/arch/arm/boot/dts/lpc4350-hitex-eval.dts
@@ -33,7 +33,7 @@
 		stdout-path = &uart0;
 	};
 
-	memory {
+	memory@28000000 {
 		device_type = "memory";
 		reg = <0x28000000 0x800000>; /* 8 MB */
 	};
@@ -424,7 +424,7 @@
 
 	/* NXP SE97BTP with temperature sensor + eeprom */
 	sensor@18 {
-		compatible = "nxp,jc42";
+		compatible = "nxp,se97", "jedec,jc-42.4-temp";
 		reg = <0x18>;
 	};
 
diff --git a/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts b/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts
index 1919be4..9b5fad6 100644
--- a/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts
+++ b/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts
@@ -33,7 +33,7 @@
 		stdout-path = &uart0;
 	};
 
-	memory {
+	memory@28000000 {
 		device_type = "memory";
 		reg = <0x28000000 0x2000000>; /* 32 MB */
 	};
diff --git a/arch/arm/boot/dts/ls1021a-twr.dts b/arch/arm/boot/dts/ls1021a-twr.dts
index 75ecaed..a8b148a 100644
--- a/arch/arm/boot/dts/ls1021a-twr.dts
+++ b/arch/arm/boot/dts/ls1021a-twr.dts
@@ -108,12 +108,23 @@
 
 	panel: panel {
 		compatible = "nec,nl4827hc19-05b";
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&dcu_out>;
+			};
+		};
 	};
 };
 
 &dcu {
-	fsl,panel = <&panel>;
 	status = "okay";
+
+	port {
+		dcu_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
 };
 
 &dspi1 {
diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi
index fc4080d..41fd536 100644
--- a/arch/arm/boot/dts/meson8b.dtsi
+++ b/arch/arm/boot/dts/meson8b.dtsi
@@ -162,6 +162,27 @@
 			reg = <0xc1108000 0x4>, <0xc1104000 0x460>;
 		};
 
+		pwm_ab: pwm@8550 {
+			compatible = "amlogic,meson8b-pwm";
+			reg = <0xc1108550 0x10>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm_cd: pwm@8650 {
+			compatible = "amlogic,meson8b-pwm";
+			reg = <0xc1108650 0x10>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm_ef: pwm@86c0 {
+			compatible = "amlogic,meson8b-pwm";
+			reg = <0xc11086c0 0x10>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
 		pinctrl_cbus: pinctrl@c1109880 {
 			compatible = "amlogic,meson8b-cbus-pinctrl";
 			reg = <0xc1109880 0x10>;
diff --git a/arch/arm/boot/dts/mps2.dtsi b/arch/arm/boot/dts/mps2.dtsi
index e3fed8d..efb8a03 100644
--- a/arch/arm/boot/dts/mps2.dtsi
+++ b/arch/arm/boot/dts/mps2.dtsi
@@ -42,6 +42,7 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
+#include "skeleton.dtsi"
 #include "armv7-m.dtsi"
 
 / {
diff --git a/arch/arm/boot/dts/ntc-gr8-evb.dts b/arch/arm/boot/dts/ntc-gr8-evb.dts
new file mode 100644
index 0000000..4b622f3
--- /dev/null
+++ b/arch/arm/boot/dts/ntc-gr8-evb.dts
@@ -0,0 +1,342 @@
+/*
+ * Copyright 2016 Free Electrons
+ * Copyright 2016 NextThing Co
+ *
+ * Mylène Josserand <mylene.josserand@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "ntc-gr8.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "NextThing GR8-EVB";
+	compatible = "nextthing,gr8-evb", "nextthing,gr8";
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		serial0 = &uart1;
+		serial1 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 10000 0>;
+		enable-gpios = <&axp_gpio 1 GPIO_ACTIVE_HIGH>;
+
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <8>;
+	};
+};
+
+&be0 {
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+
+		/*
+		* The interrupt is routed through the "External Fast
+		* Interrupt Request" pin (ball G13 of the module)
+		* directly to the main interrupt controller, without
+		* any other controller interfering.
+		*/
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+
+	wm8978: codec@1a {
+		#sound-dai-cells = <0>;
+		compatible = "wlf,wm8978";
+		reg = <0x1a>;
+	};
+
+	pcf8563: rtc@51 {
+		compatible = "phg,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+};
+
+&i2s0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s0_mclk_pins_a>, <&i2s0_data_pins_a>;
+	status = "okay";
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pins_a>;
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button@190 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <190000>;
+	};
+
+	button@390 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <390000>;
+	};
+
+	button@600 {
+		label = "Menu";
+		linux,code = <KEY_MENU>;
+		channel = <0>;
+		voltage = <600000>;
+	};
+
+	button@800 {
+		label = "Search";
+		linux,code = <KEY_SEARCH>;
+		channel = <0>;
+		voltage = <800000>;
+	};
+
+	button@980 {
+		label = "Home";
+		linux,code = <KEY_HOMEPAGE>;
+		channel = <0>;
+		voltage = <980000>;
+	};
+
+	button@1180 {
+		label = "Esc";
+		linux,code = <KEY_ESC>;
+		channel = <0>;
+		voltage = <1180000>;
+	};
+
+	button@1400 {
+		label = "Enter";
+		linux,code = <KEY_ENTER>;
+		channel = <0>;
+		voltage = <1400000>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_gr8_evb>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
+	cd-inverted;
+	status = "okay";
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_pins_a &nand_cs0_pins_a &nand_rb0_pins_a>;
+
+	/* MLC Support sucks for now */
+	status = "disabled";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	mmc0_cd_pin_gr8_evb: mmc0-cd-pin@0 {
+		allwinner,pins = "PG0";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	usb0_id_pin_gr8_evb: usb0-id-pin@0 {
+		allwinner,pins = "PG2";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	usb0_vbus_det_pin_gr8_evb: usb0-vbus-det-pin@0 {
+		allwinner,pins = "PG1";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	usb1_vbus_pin_gr8_evb: usb1-vbus-pin@0 {
+		allwinner,pins = "PG13";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pins_a>;
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+	regulator-always-on;
+};
+
+&reg_dcdc3 {
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-sys";
+	regulator-always-on;
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avcc";
+	regulator-always-on;
+};
+
+&reg_usb1_vbus {
+	pinctrl-0 = <&usb1_vbus_pin_gr8_evb>;
+	gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&rtp {
+	allwinner,ts-attached;
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spdif_tx_pins_a>;
+	status = "okay";
+};
+
+&tve0 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins_a>, <&uart1_cts_rts_pins_a>;
+	status = "okay";
+};
+
+&usb_otg {
+	/*
+	 * The GR8-EVB has a somewhat interesting design. There's a
+	 * pin supposed to control VBUS, an ID pin, a VBUS detect pin,
+	 * so everything should work just fine.
+	 *
+	 * Except that the pin supposed to control VBUS is not
+	 * connected to any controllable output, neither to the SoC
+	 * through a GPIO or to the PMIC, and it is pulled down,
+	 * meaning that we will never be able to enable VBUS on this
+	 * board.
+	 */
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_pin_gr8_evb>, <&usb0_vbus_det_pin_gr8_evb>;
+	usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
+	usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/ntc-gr8.dtsi b/arch/arm/boot/dts/ntc-gr8.dtsi
new file mode 100644
index 0000000..ca54e03
--- /dev/null
+++ b/arch/arm/boot/dts/ntc-gr8.dtsi
@@ -0,0 +1,1087 @@
+/*
+ * Copyright 2016 Mylène Josserand
+ *
+ * Mylène Josserand <mylene.josserand@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/clock/sun4i-a10-pll2.h>
+#include <dt-bindings/dma/sun4i-a10.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	interrupt-parent = <&intc>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a8";
+			reg = <0x0>;
+			clocks = <&cpu>;
+		};
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/*
+		 * This is a dummy clock, to be used as placeholder on
+		 * other mux clocks when a specific parent clock is not
+		 * yet implemented. It should be dropped when the driver
+		 * is complete.
+		 */
+		dummy: dummy {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <0>;
+		};
+
+		osc24M: clk@01c20050 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-osc-clk";
+			reg = <0x01c20050 0x4>;
+			clock-frequency = <24000000>;
+			clock-output-names = "osc24M";
+		};
+
+		osc3M: osc3M-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clock-div = <8>;
+			clock-mult = <1>;
+			clocks = <&osc24M>;
+			clock-output-names = "osc3M";
+		};
+
+		osc32k: clk@0 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			clock-output-names = "osc32k";
+		};
+
+		pll1: clk@01c20000 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-pll1-clk";
+			reg = <0x01c20000 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll1";
+		};
+
+		pll2: clk@01c20008 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun5i-a13-pll2-clk";
+			reg = <0x01c20008 0x8>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll2-1x", "pll2-2x",
+					     "pll2-4x", "pll2-8x";
+		};
+
+		pll3: clk@01c20010 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-pll3-clk";
+			reg = <0x01c20010 0x4>;
+			clocks = <&osc3M>;
+			clock-output-names = "pll3";
+		};
+
+		pll3x2: pll3x2-clk {
+			compatible = "allwinner,sun4i-a10-pll3-2x-clk";
+			#clock-cells = <0>;
+			clock-div = <1>;
+			clock-mult = <2>;
+			clocks = <&pll3>;
+			clock-output-names = "pll3-2x";
+		};
+
+		pll4: clk@01c20018 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-pll1-clk";
+			reg = <0x01c20018 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll4";
+		};
+
+		pll5: clk@01c20020 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-pll5-clk";
+			reg = <0x01c20020 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll5_ddr", "pll5_other";
+		};
+
+		pll6: clk@01c20028 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-pll6-clk";
+			reg = <0x01c20028 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll6_sata", "pll6_other", "pll6";
+		};
+
+		pll7: clk@01c20030 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-pll3-clk";
+			reg = <0x01c20030 0x4>;
+			clocks = <&osc3M>;
+			clock-output-names = "pll7";
+		};
+
+		pll7x2: pll7x2-clk {
+			compatible = "allwinner,sun4i-a10-pll3-2x-clk";
+			#clock-cells = <0>;
+			clock-div = <1>;
+			clock-mult = <2>;
+			clocks = <&pll7>;
+			clock-output-names = "pll7-2x";
+		};
+
+		/* dummy is 200M */
+		cpu: cpu@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-cpu-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>;
+			clock-output-names = "cpu";
+		};
+
+		axi: axi@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-axi-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&cpu>;
+			clock-output-names = "axi";
+		};
+
+		ahb: ahb@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun5i-a13-ahb-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&axi>, <&cpu>, <&pll6 1>;
+			clock-output-names = "ahb";
+			/*
+			 * Use PLL6 as parent, instead of CPU/AXI
+			 * which has rate changes due to cpufreq
+			 */
+			assigned-clocks = <&ahb>;
+			assigned-clock-parents = <&pll6 1>;
+		};
+
+		apb0: apb0@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-apb0-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&ahb>;
+			clock-output-names = "apb0";
+		};
+
+		apb1: clk@01c20058 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-apb1-clk";
+			reg = <0x01c20058 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
+			clock-output-names = "apb1";
+		};
+
+		axi_gates: clk@01c2005c {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-gates-clk";
+			reg = <0x01c2005c 0x4>;
+			clocks = <&axi>;
+			clock-indices = <0>;
+			clock-output-names = "axi_dram";
+		};
+
+		ahb_gates: clk@01c20060 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun5i-a13-ahb-gates-clk";
+			reg = <0x01c20060 0x8>;
+			clocks = <&ahb>;
+			clock-indices = <0>, <1>,
+					<2>, <5>, <6>,
+					<7>, <8>, <9>,
+					<10>, <13>,
+					<14>, <17>, <20>,
+					<21>, <22>,
+					<28>, <32>, <34>,
+					<36>, <40>, <44>,
+					<46>, <51>,
+					<52>;
+			clock-output-names = "ahb_usbotg", "ahb_ehci",
+					     "ahb_ohci", "ahb_ss", "ahb_dma",
+					     "ahb_bist", "ahb_mmc0", "ahb_mmc1",
+					     "ahb_mmc2", "ahb_nand",
+					     "ahb_sdram", "ahb_emac", "ahb_spi0",
+					     "ahb_spi1", "ahb_spi2",
+					     "ahb_hstimer", "ahb_ve", "ahb_tve",
+					     "ahb_lcd", "ahb_csi", "ahb_de_be",
+					     "ahb_de_fe", "ahb_iep",
+					     "ahb_mali400";
+		};
+
+		apb0_gates: clk@01c20068 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-gates-clk";
+			reg = <0x01c20068 0x4>;
+			clocks = <&apb0>;
+			clock-indices = <0>, <3>,
+					<5>, <6>;
+			clock-output-names = "apb0_codec", "apb0_i2s0",
+					     "apb0_pio", "apb0_ir";
+		};
+
+		apb1_gates: clk@01c2006c {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-gates-clk";
+			reg = <0x01c2006c 0x4>;
+			clocks = <&apb1>;
+			clock-indices = <0>, <1>,
+					<2>, <17>,
+					<18>, <19>;
+			clock-output-names = "apb1_i2c0", "apb1_i2c1",
+					     "apb1_i2c2", "apb1_uart1",
+					     "apb1_uart2", "apb1_uart3";
+		};
+
+		nand_clk: clk@01c20080 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c20080 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "nand";
+		};
+
+		ms_clk: clk@01c20084 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c20084 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "ms";
+		};
+
+		mmc0_clk: clk@01c20088 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
+			reg = <0x01c20088 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "mmc0",
+					     "mmc0_output",
+					     "mmc0_sample";
+		};
+
+		mmc1_clk: clk@01c2008c {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
+			reg = <0x01c2008c 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "mmc1",
+					     "mmc1_output",
+					     "mmc1_sample";
+		};
+
+		mmc2_clk: clk@01c20090 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
+			reg = <0x01c20090 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "mmc2",
+					     "mmc2_output",
+					     "mmc2_sample";
+		};
+
+		ts_clk: clk@01c20098 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c20098 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "ts";
+		};
+
+		ss_clk: clk@01c2009c {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c2009c 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "ss";
+		};
+
+		spi0_clk: clk@01c200a0 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c200a0 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "spi0";
+		};
+
+		spi1_clk: clk@01c200a4 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c200a4 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "spi1";
+		};
+
+		spi2_clk: clk@01c200a8 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c200a8 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "spi2";
+		};
+
+		ir0_clk: clk@01c200b0 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c200b0 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "ir0";
+		};
+
+		i2s0_clk: clk@01c200b8 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod1-clk";
+			reg = <0x01c200b8 0x4>;
+			clocks = <&pll2 SUN4I_A10_PLL2_8X>,
+				 <&pll2 SUN4I_A10_PLL2_4X>,
+				 <&pll2 SUN4I_A10_PLL2_2X>,
+				 <&pll2 SUN4I_A10_PLL2_1X>;
+			clock-output-names = "i2s0";
+		};
+
+		spdif_clk: clk@01c200c0 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod1-clk";
+			reg = <0x01c200c0 0x4>;
+			clocks = <&pll2 SUN4I_A10_PLL2_8X>,
+				 <&pll2 SUN4I_A10_PLL2_4X>,
+				 <&pll2 SUN4I_A10_PLL2_2X>,
+				 <&pll2 SUN4I_A10_PLL2_1X>;
+			clock-output-names = "spdif";
+		};
+
+		usb_clk: clk@01c200cc {
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			compatible = "allwinner,sun5i-a13-usb-clk";
+			reg = <0x01c200cc 0x4>;
+			clocks = <&pll6 1>;
+			clock-output-names = "usb_ohci0", "usb_phy";
+		};
+
+		dram_gates: clk@01c20100 {
+			#clock-cells = <1>;
+			compatible = "nextthing,gr8-dram-gates-clk",
+				     "allwinner,sun4i-a10-gates-clk";
+			reg = <0x01c20100 0x4>;
+			clocks = <&pll5 0>;
+			clock-indices = <0>,
+					<1>,
+					<25>,
+					<26>,
+					<29>,
+					<31>;
+			clock-output-names = "dram_ve",
+					     "dram_csi",
+					     "dram_de_fe",
+					     "dram_de_be",
+					     "dram_ace",
+					     "dram_iep";
+		};
+
+		de_be_clk: clk@01c20104 {
+			#clock-cells = <0>;
+			#reset-cells = <0>;
+			compatible = "allwinner,sun4i-a10-display-clk";
+			reg = <0x01c20104 0x4>;
+			clocks = <&pll3>, <&pll7>, <&pll5 1>;
+			clock-output-names = "de-be";
+		};
+
+		de_fe_clk: clk@01c2010c {
+			#clock-cells = <0>;
+			#reset-cells = <0>;
+			compatible = "allwinner,sun4i-a10-display-clk";
+			reg = <0x01c2010c 0x4>;
+			clocks = <&pll3>, <&pll7>, <&pll5 1>;
+			clock-output-names = "de-fe";
+		};
+
+		tcon_ch0_clk: clk@01c20118 {
+			#clock-cells = <0>;
+			#reset-cells = <1>;
+			compatible = "allwinner,sun4i-a10-tcon-ch0-clk";
+			reg = <0x01c20118 0x4>;
+			clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
+			clock-output-names = "tcon-ch0-sclk";
+		};
+
+		tcon_ch1_clk: clk@01c2012c {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-tcon-ch1-clk";
+			reg = <0x01c2012c 0x4>;
+			clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
+			clock-output-names = "tcon-ch1-sclk";
+		};
+
+		codec_clk: clk@01c20140 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-codec-clk";
+			reg = <0x01c20140 0x4>;
+			clocks = <&pll2 SUN4I_A10_PLL2_1X>;
+			clock-output-names = "codec";
+		};
+
+		mbus_clk: clk@01c2015c {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun5i-a13-mbus-clk";
+			reg = <0x01c2015c 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "mbus";
+		};
+	};
+
+	display-engine {
+		compatible = "allwinner,sun5i-a13-display-engine";
+		allwinner,pipelines = <&fe0>;
+	};
+
+	soc@01c00000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		sram-controller@01c00000 {
+			compatible = "allwinner,sun4i-a10-sram-controller";
+			reg = <0x01c00000 0x30>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			sram_a: sram@00000000 {
+				compatible = "mmio-sram";
+				reg = <0x00000000 0xc000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x00000000 0xc000>;
+			};
+
+			sram_d: sram@00010000 {
+				compatible = "mmio-sram";
+				reg = <0x00010000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x00010000 0x1000>;
+
+				otg_sram: sram-section@0000 {
+					compatible = "allwinner,sun4i-a10-sram-d";
+					reg = <0x0000 0x1000>;
+					status = "disabled";
+				};
+			};
+		};
+
+		dma: dma-controller@01c02000 {
+			compatible = "allwinner,sun4i-a10-dma";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <27>;
+			clocks = <&ahb_gates 6>;
+			#dma-cells = <2>;
+		};
+
+		nfc: nand@01c03000 {
+			compatible = "allwinner,sun4i-a10-nand";
+			reg = <0x01c03000 0x1000>;
+			interrupts = <37>;
+			clocks = <&ahb_gates 13>, <&nand_clk>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 3>;
+			dma-names = "rxtx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi0: spi@01c05000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c05000 0x1000>;
+			interrupts = <10>;
+			clocks = <&ahb_gates 20>, <&spi0_clk>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 27>,
+			       <&dma SUN4I_DMA_DEDICATED 26>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi1: spi@01c06000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c06000 0x1000>;
+			interrupts = <11>;
+			clocks = <&ahb_gates 21>, <&spi1_clk>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 9>,
+			       <&dma SUN4I_DMA_DEDICATED 8>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		tve0: tv-encoder@01c0a000 {
+			compatible = "allwinner,sun4i-a10-tv-encoder";
+			reg = <0x01c0a000 0x1000>;
+			clocks = <&ahb_gates 34>;
+			resets = <&tcon_ch0_clk 0>;
+			status = "disabled";
+
+			port {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tve0_in_tcon0: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&tcon0_out_tve0>;
+				};
+			};
+		};
+
+		tcon0: lcd-controller@01c0c000 {
+			compatible = "allwinner,sun5i-a13-tcon";
+			reg = <0x01c0c000 0x1000>;
+			interrupts = <44>;
+			resets = <&tcon_ch0_clk 1>;
+			reset-names = "lcd";
+			clocks = <&ahb_gates 36>,
+				 <&tcon_ch0_clk>,
+				 <&tcon_ch1_clk>;
+			clock-names = "ahb",
+				      "tcon-ch0",
+				      "tcon-ch1";
+			clock-output-names = "tcon-pixel-clock";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon0_in_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_out_tcon0>;
+					};
+				};
+
+				tcon0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon0_out_tve0: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tve0_in_tcon0>;
+					};
+				};
+			};
+		};
+
+		mmc0: mmc@01c0f000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&ahb_gates 8>,
+				 <&mmc0_clk 0>,
+				 <&mmc0_clk 1>,
+				 <&mmc0_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			interrupts = <32>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@01c10000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&ahb_gates 9>,
+				 <&mmc1_clk 0>,
+				 <&mmc1_clk 1>,
+				 <&mmc1_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			interrupts = <33>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@01c11000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&ahb_gates 10>,
+				 <&mmc2_clk 0>,
+				 <&mmc2_clk 1>,
+				 <&mmc2_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			interrupts = <34>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		usb_otg: usb@01c13000 {
+			compatible = "allwinner,sun4i-a10-musb";
+			reg = <0x01c13000 0x0400>;
+			clocks = <&ahb_gates 0>;
+			interrupts = <38>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			allwinner,sram = <&otg_sram 1>;
+			status = "disabled";
+
+			dr_mode = "otg";
+		};
+
+		usbphy: phy@01c13400 {
+			#phy-cells = <1>;
+			compatible = "allwinner,sun5i-a13-usb-phy";
+			reg = <0x01c13400 0x10 0x01c14800 0x4>;
+			reg-names = "phy_ctrl", "pmu1";
+			clocks = <&usb_clk 8>;
+			clock-names = "usb_phy";
+			resets = <&usb_clk 0>, <&usb_clk 1>;
+			reset-names = "usb0_reset", "usb1_reset";
+			status = "disabled";
+		};
+
+		ehci0: usb@01c14000 {
+			compatible = "allwinner,sun5i-a13-ehci", "generic-ehci";
+			reg = <0x01c14000 0x100>;
+			interrupts = <39>;
+			clocks = <&ahb_gates 1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@01c14400 {
+			compatible = "allwinner,sun5i-a13-ohci", "generic-ohci";
+			reg = <0x01c14400 0x100>;
+			interrupts = <40>;
+			clocks = <&usb_clk 6>, <&ahb_gates 2>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		spi2: spi@01c17000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c17000 0x1000>;
+			interrupts = <12>;
+			clocks = <&ahb_gates 22>, <&spi2_clk>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 29>,
+			       <&dma SUN4I_DMA_DEDICATED 28>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		intc: interrupt-controller@01c20400 {
+			compatible = "allwinner,sun4i-a10-ic";
+			reg = <0x01c20400 0x400>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		pio: pinctrl@01c20800 {
+			compatible = "nextthing,gr8-pinctrl";
+			reg = <0x01c20800 0x400>;
+			interrupts = <28>;
+			clocks = <&apb0_gates 5>;
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#gpio-cells = <3>;
+
+			i2c0_pins_a: i2c0@0 {
+				allwinner,pins = "PB0", "PB1";
+				allwinner,function = "i2c0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			i2c1_pins_a: i2c1@0 {
+				allwinner,pins = "PB15", "PB16";
+				allwinner,function = "i2c1";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			i2c2_pins_a: i2c2@0 {
+				allwinner,pins = "PB17", "PB18";
+				allwinner,function = "i2c2";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			i2s0_data_pins_a: i2s0-data@0 {
+				allwinner,pins = "PB6", "PB7", "PB8", "PB9";
+				allwinner,function = "i2s0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			i2s0_mclk_pins_a: i2s0-mclk@0 {
+				allwinner,pins = "PB6", "PB7", "PB8", "PB9";
+				allwinner,function = "i2s0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			ir0_rx_pins_a: ir0@0 {
+				allwinner,pins = "PB4";
+				allwinner,function = "ir0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			lcd_rgb666_pins: lcd-rgb666@0 {
+				allwinner,pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7",
+						 "PD10", "PD11", "PD12", "PD13", "PD14", "PD15",
+						 "PD18", "PD19", "PD20", "PD21", "PD22", "PD23",
+						 "PD24", "PD25", "PD26", "PD27";
+				allwinner,function = "lcd0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			mmc0_pins_a: mmc0@0 {
+				allwinner,pins = "PF0", "PF1", "PF2", "PF3",
+						 "PF4", "PF5";
+				allwinner,function = "mmc0";
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			nand_pins_a: nand-base0@0 {
+				allwinner,pins = "PC0", "PC1", "PC2",
+						"PC5", "PC8", "PC9", "PC10",
+						"PC11", "PC12", "PC13", "PC14",
+						"PC15";
+				allwinner,function = "nand0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			nand_cs0_pins_a: nand-cs@0 {
+				allwinner,pins = "PC4";
+				allwinner,function = "nand0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			nand_rb0_pins_a: nand-rb@0 {
+				allwinner,pins = "PC6";
+				allwinner,function = "nand0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			pwm0_pins_a: pwm0@0 {
+				allwinner,pins = "PB2";
+				allwinner,function = "pwm0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			spdif_tx_pins_a: spdif@0 {
+				allwinner,pins = "PB10";
+				allwinner,function = "spdif";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+			};
+
+			uart1_pins_a: uart1@1 {
+				allwinner,pins = "PG3", "PG4";
+				allwinner,function = "uart1";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			uart1_cts_rts_pins_a: uart1-cts-rts@0 {
+				allwinner,pins = "PG5", "PG6";
+				allwinner,function = "uart1";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+		};
+
+		pwm: pwm@01c20e00 {
+			compatible = "allwinner,sun5i-a10s-pwm";
+			reg = <0x01c20e00 0xc>;
+			clocks = <&osc24M>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		timer@01c20c00 {
+			compatible = "allwinner,sun4i-a10-timer";
+			reg = <0x01c20c00 0x90>;
+			interrupts = <22>;
+			clocks = <&osc24M>;
+		};
+
+		wdt: watchdog@01c20c90 {
+			compatible = "allwinner,sun4i-a10-wdt";
+			reg = <0x01c20c90 0x10>;
+		};
+
+		spdif: spdif@01c21000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun4i-a10-spdif";
+			reg = <0x01c21000 0x400>;
+			interrupts = <13>;
+			clocks = <&apb0_gates 1>, <&spdif_clk>;
+			clock-names = "apb", "spdif";
+			dmas = <&dma SUN4I_DMA_NORMAL 2>,
+			       <&dma SUN4I_DMA_NORMAL 2>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		ir0: ir@01c21800 {
+			compatible = "allwinner,sun4i-a10-ir";
+			clocks = <&apb0_gates 6>, <&ir0_clk>;
+			clock-names = "apb", "ir";
+			interrupts = <5>;
+			reg = <0x01c21800 0x40>;
+			status = "disabled";
+		};
+
+		i2s0: i2s@01c22400 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun4i-a10-i2s";
+			reg = <0x01c22400 0x400>;
+			interrupts = <16>;
+			clocks = <&apb0_gates 3>, <&i2s0_clk>;
+			clock-names = "apb", "mod";
+			dmas = <&dma SUN4I_DMA_NORMAL 3>,
+			       <&dma SUN4I_DMA_NORMAL 3>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		lradc: lradc@01c22800 {
+			compatible = "allwinner,sun4i-a10-lradc-keys";
+			reg = <0x01c22800 0x100>;
+			interrupts = <31>;
+			status = "disabled";
+		};
+
+		codec: codec@01c22c00 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun4i-a10-codec";
+			reg = <0x01c22c00 0x40>;
+			interrupts = <30>;
+			clocks = <&apb0_gates 0>, <&codec_clk>;
+			clock-names = "apb", "codec";
+			dmas = <&dma SUN4I_DMA_NORMAL 19>,
+			       <&dma SUN4I_DMA_NORMAL 19>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		rtp: rtp@01c25000 {
+			compatible = "allwinner,sun5i-a13-ts";
+			reg = <0x01c25000 0x100>;
+			interrupts = <29>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		uart1: serial@01c28400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28400 0x400>;
+			interrupts = <2>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb1_gates 17>;
+			status = "disabled";
+		};
+
+		uart2: serial@01c28800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28800 0x400>;
+			interrupts = <3>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb1_gates 18>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@01c2ac00 {
+			compatible = "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2ac00 0x400>;
+			interrupts = <7>;
+			clocks = <&apb1_gates 0>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@01c2b000 {
+			compatible = "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <8>;
+			clocks = <&apb1_gates 1>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@01c2b400 {
+			compatible = "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2b400 0x400>;
+			interrupts = <9>;
+			clocks = <&apb1_gates 2>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		timer@01c60000 {
+			compatible = "allwinner,sun5i-a13-hstimer";
+			reg = <0x01c60000 0x1000>;
+			interrupts = <82>, <83>;
+			clocks = <&ahb_gates 28>;
+		};
+
+		fe0: display-frontend@01e00000 {
+			compatible = "allwinner,sun5i-a13-display-frontend";
+			reg = <0x01e00000 0x20000>;
+			interrupts = <47>;
+			clocks = <&ahb_gates 46>, <&de_fe_clk>,
+				 <&dram_gates 25>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&de_fe_clk>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fe0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					fe0_out_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_in_fe0>;
+					};
+				};
+			};
+		};
+
+		be0: display-backend@01e60000 {
+			compatible = "allwinner,sun5i-a13-display-backend";
+			reg = <0x01e60000 0x10000>;
+			clocks = <&ahb_gates 44>, <&de_be_clk>,
+				 <&dram_gates 26>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&de_be_clk>;
+			status = "disabled";
+
+			assigned-clocks = <&de_be_clk>;
+			assigned-clock-rates = <300000000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				be0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					be0_in_fe0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&fe0_out_be0>;
+					};
+				};
+
+				be0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					be0_out_tcon0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon0_in_be0>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi
index 578fa2a..4f793a0 100644
--- a/arch/arm/boot/dts/omap2.dtsi
+++ b/arch/arm/boot/dts/omap2.dtsi
@@ -12,11 +12,11 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/pinctrl/omap.h>
 
-#include "skeleton.dtsi"
-
 / {
 	compatible = "ti,omap2430", "ti,omap2420", "ti,omap2";
 	interrupt-parent = <&intc>;
+	#address-cells = <1>;
+	#size-cells = <1>;
 
 	aliases {
 		serial0 = &uart1;
diff --git a/arch/arm/boot/dts/omap2420-h4.dts b/arch/arm/boot/dts/omap2420-h4.dts
index 34cdecb..9265c0b 100644
--- a/arch/arm/boot/dts/omap2420-h4.dts
+++ b/arch/arm/boot/dts/omap2420-h4.dts
@@ -13,7 +13,7 @@
 	model = "TI OMAP2420 H4 board";
 	compatible = "ti,omap2420-h4", "ti,omap2420", "ti,omap2";
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x4000000>; /* 64 MB */
 	};
diff --git a/arch/arm/boot/dts/omap2420-n8x0-common.dtsi b/arch/arm/boot/dts/omap2420-n8x0-common.dtsi
index db95aad..7e5ffc5 100644
--- a/arch/arm/boot/dts/omap2420-n8x0-common.dtsi
+++ b/arch/arm/boot/dts/omap2420-n8x0-common.dtsi
@@ -1,7 +1,7 @@
 #include "omap2420.dtsi"
 
 / {
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x8000000>; /* 128 MB */
 	};
diff --git a/arch/arm/boot/dts/omap2430-sdp.dts b/arch/arm/boot/dts/omap2430-sdp.dts
index 6b36ede..4f7d9d7 100644
--- a/arch/arm/boot/dts/omap2430-sdp.dts
+++ b/arch/arm/boot/dts/omap2430-sdp.dts
@@ -13,7 +13,7 @@
 	model = "TI OMAP2430 SDP";
 	compatible = "ti,omap2430-sdp", "ti,omap2430", "ti,omap2";
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x8000000>; /* 128 MB */
 	};
diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts
index 8ffde06..85e297e 100644
--- a/arch/arm/boot/dts/omap3-beagle-xm.dts
+++ b/arch/arm/boot/dts/omap3-beagle-xm.dts
@@ -19,7 +19,7 @@
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x20000000>; /* 512 MB */
 	};
diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
index a19d907..4be85ce 100644
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -19,7 +19,7 @@
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
diff --git a/arch/arm/boot/dts/omap3-cm-t3x.dtsi b/arch/arm/boot/dts/omap3-cm-t3x.dtsi
index 6a0df13..57b9a02 100644
--- a/arch/arm/boot/dts/omap3-cm-t3x.dtsi
+++ b/arch/arm/boot/dts/omap3-cm-t3x.dtsi
@@ -4,7 +4,7 @@
 
 / {
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
diff --git a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi
index 5860101..f330c69 100644
--- a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi
+++ b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi
@@ -10,7 +10,7 @@
 
 #include "omap34xx.dtsi"
 / {
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>;	/* 256 MB */
 	};
diff --git a/arch/arm/boot/dts/omap3-evm-37xx.dts b/arch/arm/boot/dts/omap3-evm-37xx.dts
index ed44982..4f9a765 100644
--- a/arch/arm/boot/dts/omap3-evm-37xx.dts
+++ b/arch/arm/boot/dts/omap3-evm-37xx.dts
@@ -15,7 +15,7 @@
 	model = "TI OMAP37XX EVM (TMDSEVM3730)";
 	compatible = "ti,omap3-evm-37xx", "ti,omap3630", "ti,omap3";
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
diff --git a/arch/arm/boot/dts/omap3-evm.dts b/arch/arm/boot/dts/omap3-evm.dts
index e10dcd0..99b2bfc 100644
--- a/arch/arm/boot/dts/omap3-evm.dts
+++ b/arch/arm/boot/dts/omap3-evm.dts
@@ -14,7 +14,7 @@
 	model = "TI OMAP35XX EVM (TMDSEVM3530)";
 	compatible = "ti,omap3-evm", "ti,omap3";
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
index c09a057..b3a8b1f 100644
--- a/arch/arm/boot/dts/omap3-gta04.dtsi
+++ b/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -21,7 +21,7 @@
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x20000000>; /* 512 MB */
 	};
@@ -102,7 +102,7 @@
 
 	backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm11 0 2000000 0>;
+		pwms = <&pwm11 0 12000000 0>;
 		pwm-names = "backlight";
 		brightness-levels = <0 11 20 30 40 50 60 70 80 90 100>;
 		default-brightness-level = <9>;	/* => 90 */
diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi
index f4f2ce4..54c4c07 100644
--- a/arch/arm/boot/dts/omap3-igep.dtsi
+++ b/arch/arm/boot/dts/omap3-igep.dtsi
@@ -13,7 +13,7 @@
 #include "omap36xx.dtsi"
 
 / {
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x20000000>; /* 512 MB */
 	};
diff --git a/arch/arm/boot/dts/omap3-ldp.dts b/arch/arm/boot/dts/omap3-ldp.dts
index 2f353da..e28fe13c 100644
--- a/arch/arm/boot/dts/omap3-ldp.dts
+++ b/arch/arm/boot/dts/omap3-ldp.dts
@@ -15,7 +15,7 @@
 	model = "TI OMAP3430 LDP (Zoom1 Labrador)";
 	compatible = "ti,omap3-ldp", "ti,omap3";
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x8000000>; /* 128 MB */
 	};
diff --git a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
index eff816e..fa611a5 100644
--- a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
+++ b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
@@ -17,7 +17,7 @@
 			bootargs = "console=ttyO0,115200n8 vt.global_cursor_default=0 consoleblank=0";
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x8000000>;   /* 128 MB */
 	};
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index 2a6078a..87ca50b 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -54,7 +54,7 @@
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi
index 927b17f..5d8c4b4 100644
--- a/arch/arm/boot/dts/omap3-n950-n9.dtsi
+++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi
@@ -24,12 +24,12 @@
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x40000000>; /* 1 GB */
 	};
 
-	vemmc: fixedregulator@0 {
+	vemmc: fixedregulator0 {
 		compatible = "regulator-fixed";
 		regulator-name = "VEMMC";
 		regulator-min-microvolt = <2900000>;
@@ -39,7 +39,7 @@
 		enable-active-high;
 	};
 
-	vwlan_fixed: fixedregulator@2 {
+	vwlan_fixed: fixedregulator2 {
 		compatible = "regulator-fixed";
 		regulator-name = "VWLAN";
 		gpio = <&gpio2 3 GPIO_ACTIVE_HIGH>; /* gpio 35 */
diff --git a/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi b/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi
index 3b3a759..99a7eee 100644
--- a/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi
@@ -44,7 +44,7 @@
 		#size-cells = <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&button_pins>;
-		button0@10 {
+		button0 {
 			label = "button0";
 			linux,code = <BTN_0>;
 			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;		/* gpio_10 */
diff --git a/arch/arm/boot/dts/omap3-overo-base.dtsi b/arch/arm/boot/dts/omap3-overo-base.dtsi
index 3e946ca..401fae8 100644
--- a/arch/arm/boot/dts/omap3-overo-base.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-base.dtsi
@@ -11,6 +11,12 @@
  */
 
 / {
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0>;
+	};
+
 	pwmleds {
 		compatible = "pwm-leds";
 
diff --git a/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi b/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi
index 4f4c6ef..56dbd11 100644
--- a/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi
@@ -37,13 +37,13 @@
 		pinctrl-0 = <&button_pins>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		button0@23 {
+		button0 {
 			label = "button0";
 			linux,code = <BTN_0>;
 			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;		/* gpio_23 */
 			wakeup-source;
 		};
-		button1@14 {
+		button1 {
 			label = "button1";
 			linux,code = <BTN_1>;
 			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;		/* gpio_14 */
diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
index ca86da6..854117d 100644
--- a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
@@ -119,7 +119,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcspi1_pins>;
 
-	lcd0: display {
+	lcd0: display@1 {
 		compatible = "lgphilips,lb035q02";
 		label = "lcd35";
 
diff --git a/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi b/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi
index 250cc7f..286f5ba 100644
--- a/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi
@@ -37,13 +37,13 @@
 		pinctrl-0 = <&button_pins>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		button0@23 {
+		button0 {
 			label = "button0";
 			linux,code = <BTN_0>;
 			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;		/* gpio_23 */
 			wakeup-source;
 		};
-		button1@14 {
+		button1 {
 			label = "button1";
 			linux,code = <BTN_1>;
 			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;		/* gpio_14 */
diff --git a/arch/arm/boot/dts/omap3-overo-palo35-common.dtsi b/arch/arm/boot/dts/omap3-overo-palo35-common.dtsi
index 8df7ec3..a8020fb 100644
--- a/arch/arm/boot/dts/omap3-overo-palo35-common.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-palo35-common.dtsi
@@ -37,13 +37,13 @@
 		pinctrl-0 = <&button_pins>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		button0@23 {
+		button0 {
 			label = "button0";
 			linux,code = <BTN_0>;
 			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;		/* gpio_23 */
 			wakeup-source;
 		};
-		button1@14 {
+		button1 {
 			label = "button1";
 			linux,code = <BTN_1>;
 			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;		/* gpio_14 */
diff --git a/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi b/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi
index 0ea2c45..11965737 100644
--- a/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi
@@ -37,13 +37,13 @@
 		pinctrl-0 = <&button_pins>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		button0@23 {
+		button0 {
 			label = "button0";
 			linux,code = <BTN_0>;
 			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;		/* gpio_23 */
 			wakeup-source;
 		};
-		button1@14 {
+		button1 {
 			label = "button1";
 			linux,code = <BTN_1>;
 			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;		/* gpio_14 */
diff --git a/arch/arm/boot/dts/omap3-pandora-common.dtsi b/arch/arm/boot/dts/omap3-pandora-common.dtsi
index dbc4dc7..53e007a 100644
--- a/arch/arm/boot/dts/omap3-pandora-common.dtsi
+++ b/arch/arm/boot/dts/omap3-pandora-common.dtsi
@@ -18,7 +18,7 @@
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x20000000>; /* 512 MB */
 	};
@@ -45,28 +45,28 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pins>;
 
-		led@1 {
+		led1 {
 			label = "pandora::sd1";
 			gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>;	/* GPIO_128 */
 			linux,default-trigger = "mmc0";
 			default-state = "off";
 		};
 
-		led@2 {
+		led2 {
 			label = "pandora::sd2";
 			gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;	/* GPIO_129 */
 			linux,default-trigger = "mmc1";
 			default-state = "off";
 		};
 
-		led@3 {
+		led3 {
 			label = "pandora::bluetooth";
 			gpios = <&gpio5 30 GPIO_ACTIVE_HIGH>;	/* GPIO_158 */
 			linux,default-trigger = "heartbeat";
 			default-state = "off";
 		};
 
-		led@4 {
+		led4 {
 			label = "pandora::wifi";
 			gpios = <&gpio5 31 GPIO_ACTIVE_HIGH>;	/* GPIO_159 */
 			linux,default-trigger = "mmc2";
diff --git a/arch/arm/boot/dts/omap3-sniper.dts b/arch/arm/boot/dts/omap3-sniper.dts
index 78a1184..bc4498e 100644
--- a/arch/arm/boot/dts/omap3-sniper.dts
+++ b/arch/arm/boot/dts/omap3-sniper.dts
@@ -20,7 +20,7 @@
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x20000000>; /* 512 MB */
 	};
diff --git a/arch/arm/boot/dts/omap3-tao3530.dtsi b/arch/arm/boot/dts/omap3-tao3530.dtsi
index 644d3c8..dc80886b 100644
--- a/arch/arm/boot/dts/omap3-tao3530.dtsi
+++ b/arch/arm/boot/dts/omap3-tao3530.dtsi
@@ -26,7 +26,7 @@
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
diff --git a/arch/arm/boot/dts/omap3-zoom3.dts b/arch/arm/boot/dts/omap3-zoom3.dts
index c29b41d..45e2ce0 100644
--- a/arch/arm/boot/dts/omap3-zoom3.dts
+++ b/arch/arm/boot/dts/omap3-zoom3.dts
@@ -20,7 +20,7 @@
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x20000000>; /* 512 MB */
 	};
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 4c3c471..353d818 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -12,11 +12,11 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/pinctrl/omap.h>
 
-#include "skeleton.dtsi"
-
 / {
 	compatible = "ti,omap3430", "ti,omap3";
 	interrupt-parent = <&intc>;
+	#address-cells = <1>;
+	#size-cells = <1>;
 
 	aliases {
 		i2c0 = &i2c1;
@@ -78,7 +78,7 @@
 	 * the moment, just use a fake OCP bus entry to represent the whole bus
 	 * hierarchy.
 	 */
-	ocp {
+	ocp@68000000 {
 		compatible = "ti,omap3-l3-smx", "simple-bus";
 		reg = <0x68000000 0x10000>;
 		interrupts = <9 10>;
diff --git a/arch/arm/boot/dts/omap3430-sdp.dts b/arch/arm/boot/dts/omap3430-sdp.dts
index a0dc8d8..abd69211 100644
--- a/arch/arm/boot/dts/omap3430-sdp.dts
+++ b/arch/arm/boot/dts/omap3430-sdp.dts
@@ -13,7 +13,7 @@
 	model = "TI OMAP3430 SDP";
 	compatible = "ti,omap3430-sdp", "ti,omap3";
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
diff --git a/arch/arm/boot/dts/omap34xx.dtsi b/arch/arm/boot/dts/omap34xx.dtsi
index e446562..e41c52d 100644
--- a/arch/arm/boot/dts/omap34xx.dtsi
+++ b/arch/arm/boot/dts/omap34xx.dtsi
@@ -28,7 +28,7 @@
 		};
 	};
 
-	ocp {
+	ocp@68000000 {
 		omap3_pmx_core2: pinmux@480025d8 {
 			compatible = "ti,omap3-padconf", "pinctrl-single";
 			reg = <0x480025d8 0x24>;
diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi
index 8b797915..718fa88 100644
--- a/arch/arm/boot/dts/omap36xx.dtsi
+++ b/arch/arm/boot/dts/omap36xx.dtsi
@@ -30,7 +30,7 @@
 		};
 	};
 
-	ocp {
+	ocp@68000000 {
 		uart4: serial@49042000 {
 			compatible = "ti,omap3-uart";
 			reg = <0x49042000 0x400>;
diff --git a/arch/arm/boot/dts/omap4-duovero-parlor.dts b/arch/arm/boot/dts/omap4-duovero-parlor.dts
index 6b39808..1b82512 100644
--- a/arch/arm/boot/dts/omap4-duovero-parlor.dts
+++ b/arch/arm/boot/dts/omap4-duovero-parlor.dts
@@ -32,7 +32,7 @@
 		compatible = "gpio-keys";
 		#address-cells = <1>;
 		#size-cells = <0>;
-		button0@121 {
+		button0 {
 			label = "button0";
 			linux,code = <BTN_0>;
 			gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;	/* gpio_121 */
diff --git a/arch/arm/boot/dts/omap4-duovero.dtsi b/arch/arm/boot/dts/omap4-duovero.dtsi
index a90b582..ec0bd97 100644
--- a/arch/arm/boot/dts/omap4-duovero.dtsi
+++ b/arch/arm/boot/dts/omap4-duovero.dtsi
@@ -12,7 +12,7 @@
 	model = "Gumstix Duovero";
 	compatible = "gumstix,omap4-duovero", "ti,omap4430", "ti,omap4";
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x40000000>; /* 1 GB */
 	};
diff --git a/arch/arm/boot/dts/omap4-kc1.dts b/arch/arm/boot/dts/omap4-kc1.dts
index 2251bd5..e3763ac 100644
--- a/arch/arm/boot/dts/omap4-kc1.dts
+++ b/arch/arm/boot/dts/omap4-kc1.dts
@@ -13,7 +13,7 @@
 	model = "Amazon Kindle Fire (first generation)";
 	compatible = "amazon,omap4-kc1", "ti,omap4430", "ti,omap4";
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x20000000>; /* 512 MB */
 	};
diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi
index f8f1395..1673689 100644
--- a/arch/arm/boot/dts/omap4-panda-common.dtsi
+++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
@@ -8,7 +8,7 @@
 #include "elpida_ecb240abacn.dtsi"
 
 / {
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x40000000>; /* 1 GB */
 	};
@@ -446,6 +446,8 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&wl12xx_pins>;
 	vmmc-supply = <&wl12xx_vmmc>;
+	interrupts-extended = <&wakeupgen GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH
+			       &omap4_pmx_core 0x10e>;
 	non-removable;
 	bus-width = <4>;
 	cap-power-off-card;
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index 10d73a7..d728ec9 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -14,7 +14,7 @@
 	model = "TI OMAP4 SDP board";
 	compatible = "ti,omap4-sdp", "ti,omap4430", "ti,omap4";
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x40000000>; /* 1 GB */
 	};
diff --git a/arch/arm/boot/dts/omap4-var-som-om44.dtsi b/arch/arm/boot/dts/omap4-var-som-om44.dtsi
index 873cfc8..758b6eb 100644
--- a/arch/arm/boot/dts/omap4-var-som-om44.dtsi
+++ b/arch/arm/boot/dts/omap4-var-som-om44.dtsi
@@ -12,7 +12,7 @@
 	model = "Variscite VAR-SOM-OM44";
 	compatible = "variscite,var-som-om44", "ti,omap4460", "ti,omap4";
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x40000000>; /* 1 GB */
 	};
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 3fdc51c..0ced079 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -10,11 +10,11 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/pinctrl/omap.h>
 
-#include "skeleton.dtsi"
-
 / {
 	compatible = "ti,omap4430", "ti,omap4";
 	interrupt-parent = <&wakeupgen>;
+	#address-cells = <1>;
+	#size-cells = <1>;
 
 	aliases {
 		i2c0 = &i2c1;
diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi
index 5196113..6365635 100644
--- a/arch/arm/boot/dts/omap5-board-common.dtsi
+++ b/arch/arm/boot/dts/omap5-board-common.dtsi
@@ -77,16 +77,6 @@
 		reset-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; /* gpio3_79 ETH_NRESET */
 	};
 
-	leds {
-		compatible = "gpio-leds";
-		led@1 {
-			label = "omap5:blue:usr1";
-			gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>; /* gpio5_153 D1 LED */
-			linux,default-trigger = "heartbeat";
-			default-state = "off";
-		};
-	};
-
 	tpd12s015: encoder {
 		compatible = "ti,tpd12s015";
 
@@ -332,7 +322,7 @@
 
 	wlcore_irq_pin: pinmux_wlcore_irq_pin {
 		pinctrl-single,pins = <
-			OMAP5_IOPAD(0x40, PIN_INPUT_PULLUP | MUX_MODE6)	/* llia_wakereqin.gpio1_wk14 */
+			OMAP5_IOPAD(0x40, PIN_INPUT | MUX_MODE6)	/* llia_wakereqin.gpio1_wk14 */
 		>;
 	};
 };
@@ -355,15 +345,17 @@
 	non-removable;
 	cap-power-off-card;
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc3_pins &wlcore_irq_pin>;
-	interrupts-extended = <&gic GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH
-			       &omap5_pmx_core 0x168>;
+	pinctrl-0 = <&mmc3_pins>;
+	interrupts-extended = <&wakeupgen GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH
+			       &omap5_pmx_core 0x16a>;
 
 	#address-cells = <1>;
 	#size-cells = <0>;
 	wlcore: wlcore@2 {
 		compatible = "ti,wl1271";
 		reg = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlcore_irq_pin>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;	/* gpio 14 */
 		ref-clock-frequency = <26000000>;
@@ -391,14 +383,23 @@
 		interrupt-controller;
 		#interrupt-cells = <2>;
 		ti,system-power-controller;
+		ti,mux-pad1 = <0xa1>;
+		ti,mux-pad2 = <0x1b>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&palmas_sys_nirq_pins &palmas_msecure_pins>;
 
+		palmas_gpio: gpio {
+			compatible = "ti,palmas-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
 		extcon_usb3: palmas_usb {
 			compatible = "ti,palmas-usb-vid";
 			ti,enable-vbus-detection;
 			ti,enable-id-detection;
 			ti,wakeup;
+			id-gpios = <&palmas_gpio 0 GPIO_ACTIVE_HIGH>;
 		};
 
 		clk32kgaudio: palmas_clk32k@1 {
diff --git a/arch/arm/boot/dts/omap5-cm-t54.dts b/arch/arm/boot/dts/omap5-cm-t54.dts
index a976560..b153f60 100644
--- a/arch/arm/boot/dts/omap5-cm-t54.dts
+++ b/arch/arm/boot/dts/omap5-cm-t54.dts
@@ -11,9 +11,9 @@
 	model = "CompuLab CM-T54";
 	compatible = "compulab,omap5-cm-t54", "ti,omap5";
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
-		reg = <0x80000000 0x7F000000>; /* 2048 MB */
+		reg = <0 0x80000000 0 0x7f000000>; /* 2048 MB */
 	};
 
 	aliases {
@@ -72,7 +72,7 @@
 
 	leds {
 		compatible = "gpio-leds";
-		led@1 {
+		led1 {
 			label = "Heartbeat";
 			gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>; /* gpio3_80 ACT_LED */
 			linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/omap5-igep0050.dts b/arch/arm/boot/dts/omap5-igep0050.dts
index f75ce02..8fc1921 100644
--- a/arch/arm/boot/dts/omap5-igep0050.dts
+++ b/arch/arm/boot/dts/omap5-igep0050.dts
@@ -7,15 +7,47 @@
  */
 /dts-v1/;
 
+#include <dt-bindings/input/input.h>
 #include "omap5-board-common.dtsi"
 
 / {
 	model = "IGEPv5";
 	compatible = "isee,omap5-igep0050", "ti,omap5";
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
-		reg = <0x80000000 0x7f000000>; /* 2032 MB */
+		reg = <0x0 0x80000000 0 0x7f000000>;	/* 2032 MB */
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&power_button_pin>;
+		pinctrl-names = "default";
+
+		power-button {
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led@1 {
+			label = "board:green:usr0";
+			gpios = <&tca6416 1 0>;
+			default-state = "off";
+		};
+		led@2 {
+			label = "board:red:usr1";
+			gpios = <&tca6416 2 0>;
+			default-state = "off";
+		};
+		led@3 {
+			label = "board:blue:usr1";
+			gpios = <&tca6416 3 0>;
+			default-state = "off";
+		};
 	};
 };
 
@@ -58,6 +90,12 @@
 			OMAP5_IOPAD(0x0fa, PIN_INPUT | MUX_MODE0)	/* i2c4_sda */
 		>;
 	};
+
+	power_button_pin: pinctrl_power_button_pin {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x086, PIN_INPUT | MUX_MODE6)	/* gpio4_118 */
+		>;
+	};
 };
 
 &tpd12s015 {
diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts
index a51e605..53d31a8 100644
--- a/arch/arm/boot/dts/omap5-uevm.dts
+++ b/arch/arm/boot/dts/omap5-uevm.dts
@@ -13,9 +13,19 @@
 	model = "TI OMAP5 uEVM board";
 	compatible = "ti,omap5-uevm", "ti,omap5";
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
-		reg = <0x80000000 0x7F000000>; /* 2032 MB */
+		reg = <0 0x80000000 0 0x7f000000>; /* 2032 MB */
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led1 {
+			label = "omap5:blue:usr1";
+			gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>; /* gpio5_153 D1 LED */
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
 	};
 };
 
@@ -61,3 +71,7 @@
 		OMAP5_IOPAD(0x1be, PIN_OUTPUT | MUX_MODE6)	/* mcspi1_somi.gpio5_141 */
 	>;
 };
+
+&wlcore {
+	compatible = "ti,wl1837";
+};
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 84c1019..2526211 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -11,11 +11,9 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/pinctrl/omap.h>
 
-#include "skeleton.dtsi"
-
 / {
-	#address-cells = <1>;
-	#size-cells = <1>;
+	#address-cells = <2>;
+	#size-cells = <2>;
 
 	compatible = "ti,omap5";
 	interrupt-parent = <&wakeupgen>;
@@ -92,10 +90,10 @@
 		compatible = "arm,cortex-a15-gic";
 		interrupt-controller;
 		#interrupt-cells = <3>;
-		reg = <0x48211000 0x1000>,
-		      <0x48212000 0x1000>,
-		      <0x48214000 0x2000>,
-		      <0x48216000 0x2000>;
+		reg = <0 0x48211000 0 0x1000>,
+		      <0 0x48212000 0 0x1000>,
+		      <0 0x48214000 0 0x2000>,
+		      <0 0x48216000 0 0x2000>;
 		interrupt-parent = <&gic>;
 	};
 
@@ -103,7 +101,7 @@
 		compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu";
 		interrupt-controller;
 		#interrupt-cells = <3>;
-		reg = <0x48281000 0x1000>;
+		reg = <0 0x48281000 0 0x1000>;
 		interrupt-parent = <&gic>;
 	};
 
@@ -131,11 +129,11 @@
 		compatible = "ti,omap5-l3-noc", "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
-		ranges;
+		ranges = <0 0 0 0xc0000000>;
 		ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
-		reg = <0x44000000 0x2000>,
-		      <0x44800000 0x3000>,
-		      <0x45000000 0x4000>;
+		reg = <0 0x44000000 0 0x2000>,
+		      <0 0x44800000 0 0x3000>,
+		      <0 0x45000000 0 0x4000>;
 		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 
@@ -865,7 +863,7 @@
 			#size-cells = <1>;
 			utmi-mode = <2>;
 			ranges;
-			dwc3@4a030000 {
+			dwc3: dwc3@4a030000 {
 				compatible = "snps,dwc3";
 				reg = <0x4a030000 0x10000>;
 				interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm/boot/dts/orion5x-mv88f5181.dtsi b/arch/arm/boot/dts/orion5x-mv88f5181.dtsi
new file mode 100644
index 0000000..f667012
--- /dev/null
+++ b/arch/arm/boot/dts/orion5x-mv88f5181.dtsi
@@ -0,0 +1,49 @@
+/*
+ * Copyright (C) 2016 Jamie Lentin <jm@lentin.co.uk>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include "orion5x.dtsi"
+
+/ {
+	compatible = "marvell,orion5x-88f5181", "marvell,orion5x";
+
+	soc {
+		compatible = "marvell,orion5x-88f5181-mbus", "simple-bus";
+
+		internal-regs {
+			pinctrl: pinctrl@10000 {
+				compatible = "marvell,88f5181-pinctrl";
+				reg = <0x10000 0x8>, <0x10050 0x4>;
+			};
+
+			core_clk: core-clocks@10030 {
+				compatible = "marvell,mv88f5181-core-clock";
+				reg = <0x10010 0x4>;
+				#clock-cells = <1>;
+			};
+
+			mbusc: mbus-controller@20000 {
+				compatible = "marvell,mbus-controller";
+				reg = <0x20000 0x100>, <0x1500 0x20>;
+			};
+		};
+	};
+};
+
+&pinctrl {
+	pmx_ge: pmx-ge {
+		marvell,pins = "mpp8", "mpp9", "mpp10", "mpp11",
+			       "mpp12", "mpp13", "mpp14", "mpp15",
+			       "mpp16", "mpp17", "mpp18", "mpp19";
+		marvell,function = "ge";
+	};
+};
+
+&eth {
+	pinctrl-0 = <&pmx_ge>;
+	pinctrl-names = "default";
+};
diff --git a/arch/arm/boot/dts/orion5x-netgear-wnr854t.dts b/arch/arm/boot/dts/orion5x-netgear-wnr854t.dts
new file mode 100644
index 0000000..9f6ae4e
--- /dev/null
+++ b/arch/arm/boot/dts/orion5x-netgear-wnr854t.dts
@@ -0,0 +1,251 @@
+/*
+ * Copyright (C) 2016 Jamie Lentin <jm@lentin.co.uk>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "orion5x-mv88f5181.dtsi"
+
+/ {
+	model = "Netgear WNR854-t";
+	compatible = "netgear,wnr854t", "marvell,orion5x-88f5181",
+		     "marvell,orion5x";
+	aliases {
+		serial0 = &uart0;
+	};
+
+	memory {
+		reg = <0x00000000 0x2000000>; /* 32 MB */
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
+			 <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
+			 <MBUS_ID(0x01, 0x0f) 0 0xf4000000 0x800000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pmx_reset_button>;
+		pinctrl-names = "default";
+
+		reset {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_power_led &pmx_power_led_blink &pmx_wan_led>;
+		pinctrl-names = "default";
+
+		led@0 {
+			label = "wnr854t:green:power";
+			gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+		};
+
+		led@1 {
+			label = "wnr854t:blink:power";
+			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+		};
+
+		led@2 {
+			label = "wnr854t:green:wan";
+			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&devbus_bootcs {
+	status = "okay";
+
+	devbus,keep-config;
+
+	flash@0 {
+		compatible = "cfi-flash";
+		reg = <0 0x800000>;
+		bank-width = <2>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "kernel";
+				reg = <0x0 0x100000>;
+			};
+
+			partition@100000 {
+				label = "rootfs";
+				reg = <0x100000 0x660000>;
+			};
+
+			partition@760000 {
+				label = "uboot_env";
+				reg = <0x760000 0x20000>;
+			};
+
+			partition@780000 {
+				label = "uboot";
+				reg = <0x780000 0x80000>;
+				read-only;
+			};
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	switch: switch@0 {
+		compatible = "marvell,mv88e6085";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0>;
+		dsa,member = <0 0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "lan3";
+				phy-handle = <&lan3phy>;
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "lan4";
+				phy-handle = <&lan4phy>;
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "wan";
+				phy-handle = <&wanphy>;
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "cpu";
+				ethernet = <&ethport>;
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "lan1";
+				phy-handle = <&lan1phy>;
+			};
+
+			port@7 {
+				reg = <7>;
+				label = "lan2";
+				phy-handle = <&lan2phy>;
+			};
+		};
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			lan3phy: ethernet-phy@0 {
+				/* Marvell 88E1121R (port 1) */
+				compatible = "ethernet-phy-id0141.0cb0",
+					     "ethernet-phy-ieee802.3-c22";
+				reg = <0>;
+				marvell,reg-init = <3 16 0 0x1777 3 17 0 0x15>;
+			};
+
+			lan4phy: ethernet-phy@1 {
+				/* Marvell 88E1121R (port 2) */
+				compatible = "ethernet-phy-id0141.0cb0",
+					     "ethernet-phy-ieee802.3-c22";
+				reg = <1>;
+				marvell,reg-init = <3 16 0 0x1777 3 17 0 0x15>;
+			};
+
+			wanphy: ethernet-phy@2 {
+				/* Marvell 88E1121R (port 1) */
+				compatible = "ethernet-phy-id0141.0cb0",
+					     "ethernet-phy-ieee802.3-c22";
+				reg = <2>;
+				marvell,reg-init = <3 16 0 0x1777 3 17 0 0x15>;
+			};
+
+			lan1phy: ethernet-phy@5 {
+				/* Marvell 88E1112 */
+				compatible = "ethernet-phy-id0141.0cb0",
+					     "ethernet-phy-ieee802.3-c22";
+				reg = <5>;
+				marvell,reg-init = <3 16 0 0x1777 3 17 0 0x15>;
+			};
+
+			lan2phy: ethernet-phy@7 {
+				/* Marvell 88E1112 */
+				compatible = "ethernet-phy-id0141.0cb0",
+					     "ethernet-phy-ieee802.3-c22";
+				reg = <7>;
+				marvell,reg-init = <3 16 0 0x1777 3 17 0 0x15>;
+			};
+		};
+	};
+};
+
+&eth {
+	status = "okay";
+
+	ethernet-port@0 {
+		/* Hardwired to DSA switch */
+		speed = <1000>;
+		duplex = <1>;
+	};
+};
+
+&pinctrl {
+	pinctrl-0 = <&pmx_pci_gpios>;
+	pinctrl-names = "default";
+
+	pmx_power_led: pmx-power-led {
+		marvell,pins = "mpp0";
+		marvell,function = "gpio";
+	};
+
+	pmx_reset_button: pmx-reset-button {
+		marvell,pins = "mpp1";
+		marvell,function = "gpio";
+	};
+
+	pmx_power_led_blink: pmx-power-led-blink {
+		marvell,pins = "mpp2";
+		marvell,function = "gpio";
+	};
+
+	pmx_wan_led: pmx-wan-led {
+		marvell,pins = "mpp3";
+		marvell,function = "gpio";
+	};
+
+	pmx_pci_gpios: pmx-pci-gpios {
+		marvell,pins = "mpp4";
+		marvell,function = "gpio";
+	};
+};
+
+&uart0 {
+	/* Pin 1: Tx, Pin 7: Rx, Pin 8: Gnd */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/orion5x.dtsi b/arch/arm/boot/dts/orion5x.dtsi
index e1b6d2a..fbccfbb 100644
--- a/arch/arm/boot/dts/orion5x.dtsi
+++ b/arch/arm/boot/dts/orion5x.dtsi
@@ -144,9 +144,10 @@
 
 			wdt: wdt@20300 {
 				compatible = "marvell,orion-wdt";
-				reg = <0x20300 0x28>;
+				reg = <0x20300 0x28>, <0x20108 0x4>;
 				interrupt-parent = <&bridge_intc>;
 				interrupts = <3>;
+				clocks = <&core_clk 0>;
 				status = "okay";
 			};
 
diff --git a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
index 0abc93e..6c00383 100644
--- a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
@@ -239,6 +239,45 @@
 						};
 					};
 				};
+
+				led@48 {
+					/*
+					 * The keypad LED @0x48 is routed to
+					 * the sensor board where it is
+					 * connected to an infrared LED
+					 * SFH4650 (60mW, @850nm) next to the
+					 * ambient light and proximity sensor
+					 * Capella Microsystems CM3605.
+					 */
+					compatible = "qcom,pm8058-keypad-led";
+					reg = <0x48>;
+					label = "pm8058:infrared:proximitysensor";
+					default-state = "off";
+				};
+				led@131 {
+					compatible = "qcom,pm8058-led";
+					reg = <0x131>;
+					label = "pm8058:red";
+					default-state = "off";
+				};
+				led@132 {
+					/*
+					 * This is actually green too on my
+					 * board, but documented as yellow.
+					 */
+					compatible = "qcom,pm8058-led";
+					reg = <0x132>;
+					label = "pm8058:yellow";
+					default-state = "off";
+					linux,default-trigger = "mmc0";
+				};
+				led@133 {
+					compatible = "qcom,pm8058-led";
+					reg = <0x133>;
+					label = "pm8058:green";
+					default-state = "on";
+					linux,default-trigger = "heartbeat";
+				};
 			};
 		};
 
diff --git a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
index 7b05f07..b72e095 100644
--- a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
@@ -253,6 +253,7 @@
 			vddcx-supply	= <&pm8921_s3>;
 			v3p3-supply	= <&pm8921_l3>;
 			v1p8-supply	= <&pm8921_l4>;
+			dr_mode		= "otg";
 		};
 
 		gadget@12500000 {
@@ -272,5 +273,19 @@
 				vqmmc-supply = <&pm8921_s4>;
 			};
 		};
+
+		imem@2a03f000 {
+			compatible = "syscon", "simple-mfd";
+			reg = <0x2a03f000 0x1000>;
+
+			reboot-mode {
+				compatible = "syscon-reboot-mode";
+				offset = <0x65c>;
+
+				mode-normal	= <0x77665501>;
+				mode-bootloader	= <0x77665500>;
+				mode-recovery	= <0x77665502>;
+			};
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 74a9b6c..1dbe697 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -5,6 +5,7 @@
 #include <dt-bindings/reset/qcom,gcc-msm8960.h>
 #include <dt-bindings/clock/qcom,mmcc-msm8960.h>
 #include <dt-bindings/soc/qcom,gsbi.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 / {
 	model = "Qualcomm APQ8064";
@@ -86,6 +87,92 @@
 		};
 	};
 
+	thermal-zones {
+		cpu-thermal0 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&gcc 7>;
+			coefficients = <1199 0>;
+
+			trips {
+				cpu_alert0: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit0: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-thermal1 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&gcc 8>;
+			coefficients = <1132 0>;
+
+			trips {
+				cpu_alert1: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit1: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-thermal2 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&gcc 9>;
+			coefficients = <1199 0>;
+
+			trips {
+				cpu_alert2: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit2: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-thermal3 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&gcc 10>;
+			coefficients = <1132 0>;
+
+			trips {
+				cpu_alert3: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit3: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
 	cpu-pmu {
 		compatible = "qcom,krait-pmu";
 		interrupts = <1 10 0x304>;
@@ -559,22 +646,50 @@
 					compatible = "qcom,pm8921-gpio",
 						     "qcom,ssbi-gpio";
 					reg = <0x150>;
-					interrupts = <192 1>, <193 1>, <194 1>,
-						     <195 1>, <196 1>, <197 1>,
-						     <198 1>, <199 1>, <200 1>,
-						     <201 1>, <202 1>, <203 1>,
-						     <204 1>, <205 1>, <206 1>,
-						     <207 1>, <208 1>, <209 1>,
-						     <210 1>, <211 1>, <212 1>,
-						     <213 1>, <214 1>, <215 1>,
-						     <216 1>, <217 1>, <218 1>,
-						     <219 1>, <220 1>, <221 1>,
-						     <222 1>, <223 1>, <224 1>,
-						     <225 1>, <226 1>, <227 1>,
-						     <228 1>, <229 1>, <230 1>,
-						     <231 1>, <232 1>, <233 1>,
-						     <234 1>, <235 1>;
-
+					interrupts = <192 IRQ_TYPE_NONE>,
+						     <193 IRQ_TYPE_NONE>,
+						     <194 IRQ_TYPE_NONE>,
+						     <195 IRQ_TYPE_NONE>,
+						     <196 IRQ_TYPE_NONE>,
+						     <197 IRQ_TYPE_NONE>,
+						     <198 IRQ_TYPE_NONE>,
+						     <199 IRQ_TYPE_NONE>,
+						     <200 IRQ_TYPE_NONE>,
+						     <201 IRQ_TYPE_NONE>,
+						     <202 IRQ_TYPE_NONE>,
+						     <203 IRQ_TYPE_NONE>,
+						     <204 IRQ_TYPE_NONE>,
+						     <205 IRQ_TYPE_NONE>,
+						     <206 IRQ_TYPE_NONE>,
+						     <207 IRQ_TYPE_NONE>,
+						     <208 IRQ_TYPE_NONE>,
+						     <209 IRQ_TYPE_NONE>,
+						     <210 IRQ_TYPE_NONE>,
+						     <211 IRQ_TYPE_NONE>,
+						     <212 IRQ_TYPE_NONE>,
+						     <213 IRQ_TYPE_NONE>,
+						     <214 IRQ_TYPE_NONE>,
+						     <215 IRQ_TYPE_NONE>,
+						     <216 IRQ_TYPE_NONE>,
+						     <217 IRQ_TYPE_NONE>,
+						     <218 IRQ_TYPE_NONE>,
+						     <219 IRQ_TYPE_NONE>,
+						     <220 IRQ_TYPE_NONE>,
+						     <221 IRQ_TYPE_NONE>,
+						     <222 IRQ_TYPE_NONE>,
+						     <223 IRQ_TYPE_NONE>,
+						     <224 IRQ_TYPE_NONE>,
+						     <225 IRQ_TYPE_NONE>,
+						     <226 IRQ_TYPE_NONE>,
+						     <227 IRQ_TYPE_NONE>,
+						     <228 IRQ_TYPE_NONE>,
+						     <229 IRQ_TYPE_NONE>,
+						     <230 IRQ_TYPE_NONE>,
+						     <231 IRQ_TYPE_NONE>,
+						     <232 IRQ_TYPE_NONE>,
+						     <233 IRQ_TYPE_NONE>,
+						     <234 IRQ_TYPE_NONE>,
+						     <235 IRQ_TYPE_NONE>;
 					gpio-controller;
 					#gpio-cells = <2>;
 
@@ -587,9 +702,18 @@
 					gpio-controller;
 					#gpio-cells = <2>;
 					interrupts =
-					<128 1>, <129 1>, <130 1>, <131 1>,
-					<132 1>, <133 1>, <134 1>, <135 1>,
-					<136 1>, <137 1>, <138 1>, <139 1>;
+					<128 IRQ_TYPE_NONE>,
+					<129 IRQ_TYPE_NONE>,
+					<130 IRQ_TYPE_NONE>,
+					<131 IRQ_TYPE_NONE>,
+					<132 IRQ_TYPE_NONE>,
+					<133 IRQ_TYPE_NONE>,
+					<134 IRQ_TYPE_NONE>,
+					<135 IRQ_TYPE_NONE>,
+					<136 IRQ_TYPE_NONE>,
+					<137 IRQ_TYPE_NONE>,
+					<138 IRQ_TYPE_NONE>,
+					<139 IRQ_TYPE_NONE>;
 				};
 
 				rtc@11d {
@@ -611,11 +735,28 @@
 			};
 		};
 
+		qfprom: qfprom@700000 {
+			compatible	= "qcom,qfprom";
+			reg		= <0x00700000 0x1000>;
+			#address-cells	= <1>;
+			#size-cells	= <1>;
+			ranges;
+			tsens_calib: calib {
+				reg = <0x404 0x10>;
+			};
+			tsens_backup: backup_calib {
+				reg = <0x414 0x10>;
+			};
+		};
+
 		gcc: clock-controller@900000 {
 			compatible = "qcom,gcc-apq8064";
 			reg = <0x00900000 0x4000>;
+			nvmem-cells = <&tsens_calib>, <&tsens_backup>;
+			nvmem-cell-names = "calib", "calib_backup";
 			#clock-cells = <1>;
 			#reset-cells = <1>;
+			#thermal-sensor-cells = <1>;
 		};
 
 		lcc: clock-controller@28000000 {
@@ -712,7 +853,6 @@
 			reg		= <0x12500000 0x400>;
 			interrupts	= <GIC_SPI 100 IRQ_TYPE_NONE>;
 			status		= "disabled";
-			dr_mode		= "host";
 
 			clocks		= <&gcc USB_HS1_XCVR_CLK>,
 					  <&gcc USB_HS1_H_CLK>;
diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi
index 7c2df06..39eb7a4 100644
--- a/arch/arm/boot/dts/qcom-apq8084.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8084.dtsi
@@ -94,6 +94,88 @@
 		};
 	};
 
+	thermal-zones {
+		cpu-thermal0 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 5>;
+
+			trips {
+				cpu_alert0: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit0: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-thermal1 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 6>;
+
+			trips {
+				cpu_alert1: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit1: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-thermal2 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 7>;
+
+			trips {
+				cpu_alert2: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit2: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-thermal3 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 8>;
+
+			trips {
+				cpu_alert3: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit3: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
 	cpu-pmu {
 		compatible = "qcom,krait-pmu";
 		interrupts = <1 7 0xf04>;
@@ -150,6 +232,27 @@
 			reg = <0xf9011000 0x1000>;
 		};
 
+		qfprom: qfprom@fc4bc000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "qcom,qfprom";
+			reg = <0xfc4bc000 0x1000>;
+			tsens_calib: calib@d0 {
+				reg = <0xd0 0x18>;
+			};
+			tsens_backup: backup@440 {
+				reg = <0x440 0x10>;
+			};
+		};
+
+		tsens: thermal-sensor@fc4a8000 {
+			compatible = "qcom,msm8974-tsens";
+			reg = <0xfc4a8000 0x2000>;
+			nvmem-cells = <&tsens_calib>, <&tsens_backup>;
+			nvmem-cell-names = "calib", "calib_backup";
+			#thermal-sensor-cells = <1>;
+		};
+
 		timer@f9020000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
index d501382..348503d 100644
--- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
@@ -95,6 +95,7 @@
 		};
 
 		sata@29000000 {
+			ports-implemented = <0x1>;
 			status = "ok";
 		};
 	};
diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi
index acbe71f..8c65e0d 100644
--- a/arch/arm/boot/dts/qcom-msm8660.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8660.dtsi
@@ -2,6 +2,7 @@
 
 /include/ "skeleton.dtsi"
 
+#include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/qcom,gcc-msm8660.h>
 #include <dt-bindings/soc/qcom,gsbi.h>
@@ -159,21 +160,50 @@
 						     "qcom,ssbi-gpio";
 					reg = <0x150>;
 					interrupt-parent = <&pmicintc>;
-					interrupts = <192 1>, <193 1>, <194 1>,
-						     <195 1>, <196 1>, <197 1>,
-						     <198 1>, <199 1>, <200 1>,
-						     <201 1>, <202 1>, <203 1>,
-						     <204 1>, <205 1>, <206 1>,
-						     <207 1>, <208 1>, <209 1>,
-						     <210 1>, <211 1>, <212 1>,
-						     <213 1>, <214 1>, <215 1>,
-						     <216 1>, <217 1>, <218 1>,
-						     <219 1>, <220 1>, <221 1>,
-						     <222 1>, <223 1>, <224 1>,
-						     <225 1>, <226 1>, <227 1>,
-						     <228 1>, <229 1>, <230 1>,
-						     <231 1>, <232 1>, <233 1>,
-						     <234 1>, <235 1>;
+					interrupts = <192 IRQ_TYPE_NONE>,
+						     <193 IRQ_TYPE_NONE>,
+						     <194 IRQ_TYPE_NONE>,
+						     <195 IRQ_TYPE_NONE>,
+						     <196 IRQ_TYPE_NONE>,
+						     <197 IRQ_TYPE_NONE>,
+						     <198 IRQ_TYPE_NONE>,
+						     <199 IRQ_TYPE_NONE>,
+						     <200 IRQ_TYPE_NONE>,
+						     <201 IRQ_TYPE_NONE>,
+						     <202 IRQ_TYPE_NONE>,
+						     <203 IRQ_TYPE_NONE>,
+						     <204 IRQ_TYPE_NONE>,
+						     <205 IRQ_TYPE_NONE>,
+						     <206 IRQ_TYPE_NONE>,
+						     <207 IRQ_TYPE_NONE>,
+						     <208 IRQ_TYPE_NONE>,
+						     <209 IRQ_TYPE_NONE>,
+						     <210 IRQ_TYPE_NONE>,
+						     <211 IRQ_TYPE_NONE>,
+						     <212 IRQ_TYPE_NONE>,
+						     <213 IRQ_TYPE_NONE>,
+						     <214 IRQ_TYPE_NONE>,
+						     <215 IRQ_TYPE_NONE>,
+						     <216 IRQ_TYPE_NONE>,
+						     <217 IRQ_TYPE_NONE>,
+						     <218 IRQ_TYPE_NONE>,
+						     <219 IRQ_TYPE_NONE>,
+						     <220 IRQ_TYPE_NONE>,
+						     <221 IRQ_TYPE_NONE>,
+						     <222 IRQ_TYPE_NONE>,
+						     <223 IRQ_TYPE_NONE>,
+						     <224 IRQ_TYPE_NONE>,
+						     <225 IRQ_TYPE_NONE>,
+						     <226 IRQ_TYPE_NONE>,
+						     <227 IRQ_TYPE_NONE>,
+						     <228 IRQ_TYPE_NONE>,
+						     <229 IRQ_TYPE_NONE>,
+						     <230 IRQ_TYPE_NONE>,
+						     <231 IRQ_TYPE_NONE>,
+						     <232 IRQ_TYPE_NONE>,
+						     <233 IRQ_TYPE_NONE>,
+						     <234 IRQ_TYPE_NONE>,
+						     <235 IRQ_TYPE_NONE>;
 					gpio-controller;
 					#gpio-cells = <2>;
 
@@ -187,9 +217,18 @@
 					#gpio-cells = <2>;
 					interrupt-parent = <&pmicintc>;
 					interrupts =
-					<128 1>, <129 1>, <130 1>, <131 1>,
-					<132 1>, <133 1>, <134 1>, <135 1>,
-					<136 1>, <137 1>, <138 1>, <139 1>;
+					<128 IRQ_TYPE_NONE>,
+					<129 IRQ_TYPE_NONE>,
+					<130 IRQ_TYPE_NONE>,
+					<131 IRQ_TYPE_NONE>,
+					<132 IRQ_TYPE_NONE>,
+					<133 IRQ_TYPE_NONE>,
+					<134 IRQ_TYPE_NONE>,
+					<135 IRQ_TYPE_NONE>,
+					<136 IRQ_TYPE_NONE>,
+					<137 IRQ_TYPE_NONE>,
+					<138 IRQ_TYPE_NONE>,
+					<139 IRQ_TYPE_NONE>;
 				};
 
 				pwrkey@1c {
diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
new file mode 100644
index 0000000..c0fb4a6
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
@@ -0,0 +1,262 @@
+#include "qcom-msm8974.dtsi"
+#include "qcom-pm8841.dtsi"
+#include "qcom-pm8941.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/ {
+	model = "LGE MSM 8974 HAMMERHEAD";
+	compatible = "lge,hammerhead", "qcom,msm8974";
+
+	aliases {
+		serial0 = &blsp1_uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	smd {
+		rpm {
+			rpm_requests {
+				pm8841-regulators {
+					s1 {
+						regulator-min-microvolt = <675000>;
+						regulator-max-microvolt = <1050000>;
+					};
+
+					s2 {
+						regulator-min-microvolt = <500000>;
+						regulator-max-microvolt = <1050000>;
+					};
+
+					s3 {
+						regulator-min-microvolt = <1050000>;
+						regulator-max-microvolt = <1050000>;
+					};
+
+					s4 {
+						regulator-min-microvolt = <815000>;
+						regulator-max-microvolt = <900000>;
+					};
+				};
+
+				pm8941-regulators {
+					vdd_l1_l3-supply = <&pm8941_s1>;
+					vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
+					vdd_l4_l11-supply = <&pm8941_s1>;
+					vdd_l5_l7-supply = <&pm8941_s2>;
+					vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
+					vdd_l8_l16_l18_l19-supply = <&vreg_vph_pwr>;
+					vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
+					vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
+					vdd_l21-supply = <&vreg_boost>;
+
+					s1 {
+						regulator-min-microvolt = <1300000>;
+						regulator-max-microvolt = <1300000>;
+
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					s2 {
+						regulator-min-microvolt = <2150000>;
+						regulator-max-microvolt = <2150000>;
+
+						regulator-boot-on;
+					};
+
+					s3 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					l1 {
+						regulator-min-microvolt = <1225000>;
+						regulator-max-microvolt = <1225000>;
+
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					l2 {
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <1200000>;
+					};
+
+					l3 {
+						regulator-min-microvolt = <1225000>;
+						regulator-max-microvolt = <1225000>;
+					};
+
+					l4 {
+						regulator-min-microvolt = <1225000>;
+						regulator-max-microvolt = <1225000>;
+					};
+
+					l5 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					l6 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+
+						regulator-boot-on;
+					};
+
+					l7 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+
+						regulator-boot-on;
+					};
+
+					l8 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					l9 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <2950000>;
+					};
+
+					l10 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <2950000>;
+					};
+
+					l11 {
+						regulator-min-microvolt = <1300000>;
+						regulator-max-microvolt = <1300000>;
+					};
+
+					l12 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					l13 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <2950000>;
+
+						regulator-boot-on;
+					};
+
+					l14 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					l15 {
+						regulator-min-microvolt = <2050000>;
+						regulator-max-microvolt = <2050000>;
+					};
+
+					l16 {
+						regulator-min-microvolt = <2700000>;
+						regulator-max-microvolt = <2700000>;
+					};
+
+					l17 {
+						regulator-min-microvolt = <2850000>;
+						regulator-max-microvolt = <2850000>;
+					};
+
+					l18 {
+						regulator-min-microvolt = <2850000>;
+						regulator-max-microvolt = <2850000>;
+					};
+
+					l19 {
+						regulator-min-microvolt = <3000000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					l20 {
+						regulator-min-microvolt = <2950000>;
+						regulator-max-microvolt = <2950000>;
+
+						regulator-boot-on;
+					};
+
+					l21 {
+						regulator-min-microvolt = <2950000>;
+						regulator-max-microvolt = <2950000>;
+
+						regulator-boot-on;
+					};
+
+					l22 {
+						regulator-min-microvolt = <3000000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					l23 {
+						regulator-min-microvolt = <3000000>;
+						regulator-max-microvolt = <3000000>;
+					};
+
+					l24 {
+						regulator-min-microvolt = <3075000>;
+						regulator-max-microvolt = <3075000>;
+
+						regulator-boot-on;
+					};
+				};
+			};
+		};
+	};
+};
+
+&soc {
+	serial@f991d000 {
+		status = "ok";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		input-name = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_pin_a>;
+
+		volume-up {
+			label = "volume_up";
+			gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		volume-down {
+			label = "volume_down";
+			gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+	};
+};
+
+&spmi_bus {
+	pm8941@0 {
+		gpios@c000 {
+			gpio_keys_pin_a: gpio-keys-active {
+				pins = "gpio2", "gpio3";
+				function = "normal";
+
+				bias-pull-up;
+				power-source = <PM8941_GPIO_S3>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
index 3fb4dad..e7c1577 100644
--- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
@@ -257,23 +257,6 @@
 			};
 		};
 	};
-
-	vreg_boost: vreg-boost {
-		compatible = "regulator-fixed";
-
-		regulator-name = "vreg-boost";
-		regulator-min-microvolt = <3150000>;
-		regulator-max-microvolt = <3150000>;
-
-		regulator-always-on;
-		regulator-boot-on;
-
-		gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&boost_bypass_n_pin>;
-     };
 };
 
 &soc {
@@ -311,6 +294,45 @@
 		pinctrl-0 = <&blsp1_uart2_pin_a>;
 	};
 
+	i2c@f9924000 {
+		status = "ok";
+
+		clock-frequency = <355000>;
+		qcom,src-freq = <50000000>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c2_pins>;
+
+		synaptics@2c {
+			compatible = "syna,rmi4-i2c";
+			reg = <0x2c>;
+
+			interrupts-extended = <&msmgpio 61 IRQ_TYPE_EDGE_FALLING>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			vdd-supply = <&pm8941_l22>;
+			vio-supply = <&pm8941_lvs3>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&ts_int_pin>;
+
+			syna,startup-delay-ms = <10>;
+
+			rmi4-f01@1 {
+				reg = <0x1>;
+				syna,nosleep-mode = <1>;
+			};
+
+			rmi4-f11@11 {
+				reg = <0x11>;
+				touchscreen-inverted-x;
+				syna,sensor-type = <1>;
+			};
+		};
+	};
+
 	pinctrl@fd510000 {
 		blsp1_uart2_pin_a: blsp1-uart2-pin-active {
 			rx {
@@ -330,6 +352,16 @@
 			};
 		};
 
+		i2c2_pins: i2c2 {
+			mux {
+				pins = "gpio6", "gpio7";
+				function = "blsp_i2c2";
+
+				drive-strength = <2>;
+				bias-disable;
+			};
+		};
+
 		sdhc1_pin_a: sdhc1-pin-active {
 			clk {
 				pins = "sdc1_clk";
@@ -366,6 +398,16 @@
 			};
 		};
 
+		ts_int_pin: touch-int {
+			pin {
+				pins = "gpio61";
+				function = "gpio";
+
+				drive-strength = <2>;
+				bias-disable;
+				input-enable;
+			};
+		};
 	};
 
 	dma-controller@f9944000 {
@@ -387,11 +429,6 @@
 		};
 
 		gpios@c000 {
-			boost_bypass_n_pin: boost-bypass {
-				pins = "gpio21";
-				function = "normal";
-			};
-
 			gpio_keys_pin_a: gpio-keys-active {
 				pins = "gpio2", "gpio3", "gpio4", "gpio5";
 				function = "normal";
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index 561d4d1..d210947 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -2,6 +2,7 @@
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/qcom,gcc-msm8974.h>
+#include <dt-bindings/gpio/gpio.h>
 #include "skeleton.dtsi"
 
 / {
@@ -131,6 +132,88 @@
 		};
 	};
 
+	thermal-zones {
+		cpu-thermal0 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 5>;
+
+			trips {
+				cpu_alert0: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit0: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-thermal1 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 6>;
+
+			trips {
+				cpu_alert1: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit1: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-thermal2 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 7>;
+
+			trips {
+				cpu_alert2: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit2: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-thermal3 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 8>;
+
+			trips {
+				cpu_alert3: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit3: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
 	cpu-pmu {
 		compatible = "qcom,krait-pmu";
 		interrupts = <1 7 0xf04>;
@@ -287,6 +370,27 @@
 			reg = <0xf9011000 0x1000>;
 		};
 
+		qfprom: qfprom@fc4bc000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "qcom,qfprom";
+			reg = <0xfc4bc000 0x1000>;
+			tsens_calib: calib@d0 {
+				reg = <0xd0 0x18>;
+			};
+			tsens_backup: backup@440 {
+				reg = <0x440 0x10>;
+			};
+		};
+
+		tsens: thermal-sensor@fc4a8000 {
+			compatible = "qcom,msm8974-tsens";
+			reg = <0xfc4a8000 0x2000>;
+			nvmem-cells = <&tsens_calib>, <&tsens_backup>;
+			nvmem-cell-names = "calib", "calib_backup";
+			#thermal-sensor-cells = <1>;
+		};
+
 		timer@f9020000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -430,6 +534,15 @@
 			reg = <0xfc428000 0x4000>;
 		};
 
+		blsp1_uart1: serial@f991d000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0xf991d000 0x1000>;
+			interrupts = <0 107 0x0>;
+			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
 		blsp1_uart2: serial@f991e000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 			reg = <0xf991e000 0x1000>;
@@ -615,4 +728,30 @@
 			};
 		};
 	};
+
+	vreg_boost: vreg-boost {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vreg-boost";
+		regulator-min-microvolt = <3150000>;
+		regulator-max-microvolt = <3150000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&boost_bypass_n_pin>;
+	};
+	vreg_vph_pwr: vreg-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph-pwr";
+
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+
+		regulator-always-on;
+	};
 };
diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi
index d95edb6..f8eb5e3 100644
--- a/arch/arm/boot/dts/qcom-pm8941.dtsi
+++ b/arch/arm/boot/dts/qcom-pm8941.dtsi
@@ -88,6 +88,11 @@
 				     <0 0xe1 0 IRQ_TYPE_NONE>,
 				     <0 0xe2 0 IRQ_TYPE_NONE>,
 				     <0 0xe3 0 IRQ_TYPE_NONE>;
+
+			boost_bypass_n_pin: boost-bypass {
+				pins = "gpio21";
+				function = "normal";
+			};
 		};
 
 		pm8941_mpps: mpps@a000 {
diff --git a/arch/arm/boot/dts/r7s72100-rskrza1.dts b/arch/arm/boot/dts/r7s72100-rskrza1.dts
new file mode 100644
index 0000000..e5dea5b
--- /dev/null
+++ b/arch/arm/boot/dts/r7s72100-rskrza1.dts
@@ -0,0 +1,61 @@
+/*
+ * Device Tree Source for the RZ/A1H RSK board
+ *
+ * Copyright (C) 2016 Renesas Electronics
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "r7s72100.dtsi"
+
+/ {
+	model = "RSKRZA1";
+	compatible = "renesas,rskrza1", "renesas,r7s72100";
+
+	aliases {
+		serial0 = &scif2;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@8000000 {
+		device_type = "memory";
+		reg = <0x08000000 0x02000000>;
+	};
+
+	lbsc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&extal_clk {
+	clock-frequency = <13330000>;
+};
+
+&usb_x1_clk {
+	clock-frequency = <48000000>;
+};
+
+&mtu2 {
+	status = "okay";
+};
+
+&ether {
+	status = "okay";
+	renesas,no-ether-link;
+	phy-handle = <&phy0>;
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&scif2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi
index e8e2a5d7..fb9ef9c 100644
--- a/arch/arm/boot/dts/r7s72100.dtsi
+++ b/arch/arm/boot/dts/r7s72100.dtsi
@@ -108,6 +108,15 @@
 			clock-output-names = "scif0", "scif1", "scif2", "scif3", "scif4", "scif5", "scif6", "scif7";
 		};
 
+		mstp7_clks: mstp7_clks@fcfe0430 {
+			#clock-cells = <1>;
+			compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0xfcfe0430 4>;
+			clocks = <&p0_clk>;
+			clock-indices = <R7S72100_CLK_ETHER>;
+			clock-output-names = "ether";
+		};
+
 		mstp9_clks: mstp9_clks@fcfe0438 {
 			#clock-cells = <1>;
 			compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
@@ -419,4 +428,17 @@
 		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
+
+	ether: ethernet@e8203000 {
+		compatible = "renesas,ether-r7s72100";
+		reg = <0xe8203000 0x800>,
+		      <0xe8204800 0x200>;
+		interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R7S72100_CLK_ETHER>;
+		power-domains = <&cpg_clocks>;
+		phy-mode = "mii";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
 };
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index d18558f..351fcc2 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -944,11 +944,6 @@
 		interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7790_CLK_VSP1_R>;
 		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-
-		renesas,has-sru;
-		renesas,#rpf = <5>;
-		renesas,#uds = <1>;
-		renesas,#wpf = <4>;
 	};
 
 	vsp1@fe928000 {
@@ -957,12 +952,6 @@
 		interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7790_CLK_VSP1_S>;
 		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-
-		renesas,has-lut;
-		renesas,has-sru;
-		renesas,#rpf = <5>;
-		renesas,#uds = <3>;
-		renesas,#wpf = <4>;
 	};
 
 	vsp1@fe930000 {
@@ -971,12 +960,6 @@
 		interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7790_CLK_VSP1_DU0>;
 		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-
-		renesas,has-lif;
-		renesas,has-lut;
-		renesas,#rpf = <4>;
-		renesas,#uds = <1>;
-		renesas,#wpf = <4>;
 	};
 
 	vsp1@fe938000 {
@@ -985,12 +968,6 @@
 		interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7790_CLK_VSP1_DU1>;
 		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-
-		renesas,has-lif;
-		renesas,has-lut;
-		renesas,#rpf = <4>;
-		renesas,#uds = <1>;
-		renesas,#wpf = <4>;
 	};
 
 	du: display@feb00000 {
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 8f0086b..162b55c 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -983,12 +983,6 @@
 		interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7791_CLK_VSP1_S>;
 		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-
-		renesas,has-lut;
-		renesas,has-sru;
-		renesas,#rpf = <5>;
-		renesas,#uds = <3>;
-		renesas,#wpf = <4>;
 	};
 
 	vsp1@fe930000 {
@@ -997,12 +991,6 @@
 		interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7791_CLK_VSP1_DU0>;
 		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-
-		renesas,has-lif;
-		renesas,has-lut;
-		renesas,#rpf = <4>;
-		renesas,#uds = <1>;
-		renesas,#wpf = <4>;
 	};
 
 	vsp1@fe938000 {
@@ -1011,12 +999,6 @@
 		interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7791_CLK_VSP1_DU1>;
 		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-
-		renesas,has-lif;
-		renesas,has-lut;
-		renesas,#rpf = <4>;
-		renesas,#uds = <1>;
-		renesas,#wpf = <4>;
 	};
 
 	du: display@feb00000 {
diff --git a/arch/arm/boot/dts/r8a7792-blanche.dts b/arch/arm/boot/dts/r8a7792-blanche.dts
index e7b40f0..f3ea43b 100644
--- a/arch/arm/boot/dts/r8a7792-blanche.dts
+++ b/arch/arm/boot/dts/r8a7792-blanche.dts
@@ -11,6 +11,8 @@
 
 /dts-v1/;
 #include "r8a7792.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "Blanche";
@@ -50,6 +52,139 @@
 		reg-io-width = <4>;
 		vddvario-supply = <&d3_3v>;
 		vdd33a-supply = <&d3_3v>;
+
+		pinctrl-0 = <&lan89218_pins>;
+		pinctrl-names = "default";
+	};
+
+	vga-encoder {
+		compatible = "adi,adv7123";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7123_in: endpoint {
+					remote-endpoint = <&du_out_rgb1>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+				adv7123_out: endpoint {
+					remote-endpoint = <&vga_in>;
+				};
+			};
+		};
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&adv7511_out>;
+			};
+		};
+	};
+
+	vga {
+		compatible = "vga-connector";
+
+		port {
+			vga_in: endpoint {
+				remote-endpoint = <&adv7123_out>;
+			};
+		};
+	};
+
+	x1_clk: x1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <74250000>;
+	};
+
+	x2_clk: x2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <65000000>;
+	};
+
+	keyboard {
+		compatible = "gpio-keys";
+
+		key-1 {
+			linux,code = <KEY_1>;
+			label = "SW2-1";
+			wakeup-source;
+			debounce-interval = <20>;
+			gpios = <&gpio3 10 GPIO_ACTIVE_LOW>;
+		};
+		key-2 {
+			linux,code = <KEY_2>;
+			label = "SW2-2";
+			wakeup-source;
+			debounce-interval = <20>;
+			gpios = <&gpio3 11 GPIO_ACTIVE_LOW>;
+		};
+		key-3 {
+			linux,code = <KEY_3>;
+			label = "SW2-3";
+			wakeup-source;
+			debounce-interval = <20>;
+			gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
+		};
+		key-4 {
+			linux,code = <KEY_4>;
+			label = "SW2-4";
+			wakeup-source;
+			debounce-interval = <20>;
+			gpios = <&gpio3 15 GPIO_ACTIVE_LOW>;
+		};
+		key-a {
+			linux,code = <KEY_A>;
+			label = "SW24";
+			wakeup-source;
+			debounce-interval = <20>;
+			gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
+		};
+		key-b {
+			linux,code = <KEY_B>;
+			label = "SW25";
+			wakeup-source;
+			debounce-interval = <20>;
+			gpios = <&gpio11 2 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led17 {
+			gpios = <&gpio10 10 GPIO_ACTIVE_HIGH>;
+		};
+		led18 {
+			gpios = <&gpio10 11 GPIO_ACTIVE_HIGH>;
+		};
+		led19 {
+			gpios = <&gpio10 12 GPIO_ACTIVE_HIGH>;
+		};
+		led20 {
+			gpios = <&gpio10 23 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	vcc_sdhi0: regulator-vcc-sdhi0 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio11 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
 	};
 };
 
@@ -57,10 +192,139 @@
 	clock-frequency = <20000000>;
 };
 
+&can_clk {
+	clock-frequency = <48000000>;
+};
+
+&pfc {
+	scif0_pins: scif0 {
+		groups = "scif0_data";
+		function = "scif0";
+	};
+
+	scif3_pins: scif3 {
+		groups = "scif3_data";
+		function = "scif3";
+	};
+
+	lan89218_pins: lan89218 {
+		intc {
+			groups = "intc_irq0";
+			function = "intc";
+		};
+		lbsc {
+			groups = "lbsc_ex_cs0";
+			function = "lbsc";
+		};
+	};
+
+	can0_pins: can0 {
+		groups = "can0_data", "can_clk";
+		function = "can0";
+	};
+
+	sdhi0_pins: sdhi0 {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+	};
+
+	du0_pins: du0 {
+		groups = "du0_rgb888", "du0_sync", "du0_disp";
+		function = "du0";
+	};
+
+	du1_pins: du1 {
+		groups = "du1_rgb666", "du1_sync", "du1_disp";
+		function = "du1";
+	};
+};
+
 &scif0 {
+	pinctrl-0 = <&scif0_pins>;
+	pinctrl-names = "default";
+
 	status = "okay";
 };
 
 &scif3 {
+	pinctrl-0 = <&scif3_pins>;
+	pinctrl-names = "default";
+
 	status = "okay";
 };
+
+&can0 {
+	pinctrl-0 = <&can0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&vcc_sdhi0>;
+	cd-gpios = <&gpio11 11 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	hdmi@39 {
+		compatible = "adi,adv7511w";
+		reg = <0x39>;
+		interrupt-parent = <&irqc>;
+		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+
+		adi,input-depth = <8>;
+		adi,input-colorspace = "rgb";
+		adi,input-clock = "1x";
+		adi,input-style = <1>;
+		adi,input-justification = "evenly";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7511_in: endpoint {
+					remote-endpoint = <&du_out_rgb0>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				adv7511_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+		};
+	};
+};
+
+&du {
+	pinctrl-0 = <&du0_pins &du1_pins>;
+	pinctrl-names = "default";
+
+	clocks = <&mstp7_clks R8A7792_CLK_DU0>, <&mstp7_clks R8A7792_CLK_DU1>,
+		 <&x1_clk>, <&x2_clk>;
+	clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
+	status = "okay";
+
+	ports {
+		port@0 {
+			endpoint {
+				remote-endpoint = <&adv7511_in>;
+			};
+		};
+		port@1 {
+			endpoint {
+				remote-endpoint = <&adv7123_in>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/r8a7792-wheat.dts b/arch/arm/boot/dts/r8a7792-wheat.dts
new file mode 100644
index 0000000..6dbb941
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7792-wheat.dts
@@ -0,0 +1,199 @@
+/*
+ * Device Tree Source for the Wheat board
+ *
+ * Copyright (C) 2016 Renesas Electronics Corporation
+ * Copyright (C) 2016 Cogent  Embedded, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "r8a7792.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Wheat";
+	compatible = "renesas,wheat", "renesas,r8a7792";
+
+	aliases {
+		serial0 = &scif0;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x40000000>;
+	};
+
+	d3_3v: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "D3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	ethernet@18000000 {
+		compatible = "smsc,lan89218", "smsc,lan9115";
+		reg = <0 0x18000000 0 0x100>;
+		phy-mode = "mii";
+		interrupt-parent = <&irqc>;
+		interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+		smsc,irq-push-pull;
+		smsc,save-mac-address;
+		reg-io-width = <4>;
+		vddvario-supply = <&d3_3v>;
+		vdd33a-supply = <&d3_3v>;
+
+		pinctrl-0 = <&lan89218_pins>;
+		pinctrl-names = "default";
+	};
+
+	keyboard {
+		compatible = "gpio-keys";
+
+		key-a {
+			linux,code = <KEY_A>;
+			label = "SW2";
+			wakeup-source;
+			debounce-interval = <20>;
+			gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
+		};
+		key-b {
+			linux,code = <KEY_B>;
+			label = "SW3";
+			wakeup-source;
+			debounce-interval = <20>;
+			gpios = <&gpio11 2 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	vcc_sdhi0: regulator-vcc-sdhi0 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio11 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&extal_clk {
+	clock-frequency = <20000000>;
+};
+
+&pfc {
+	scif0_pins: scif0 {
+		groups = "scif0_data";
+		function = "scif0";
+	};
+
+	lan89218_pins: lan89218 {
+		intc {
+			groups = "intc_irq0";
+			function = "intc";
+		};
+		lbsc {
+			groups = "lbsc_ex_cs0";
+			function = "lbsc";
+		};
+	};
+
+	can0_pins: can0 {
+		groups = "can0_data";
+		function = "can0";
+	};
+
+	can1_pins: can1 {
+		groups = "can1_data";
+		function = "can1";
+	};
+
+	sdhi0_pins: sdhi0 {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+	};
+
+	qspi_pins: qspi {
+		groups = "qspi_ctrl", "qspi_data4";
+		function = "qspi";
+	};
+};
+
+&scif0 {
+	pinctrl-0 = <&scif0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&can0 {
+	pinctrl-0 = <&can0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-0 = <&can1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&vcc_sdhi0>;
+	cd-gpios = <&gpio11 11 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&qspi {
+	pinctrl-0 = <&qspi_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	flash@0 {
+		compatible = "spansion,s25fl512s", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <30000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		spi-cpol;
+		spi-cpha;
+		m25p,fast-read;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "loader";
+				reg = <0x00000000 0x00040000>;
+				read-only;
+			};
+			partition@40000 {
+				label = "user";
+				reg = <0x00040000 0x00400000>;
+				read-only;
+			};
+			partition@440000 {
+				label = "flash";
+				reg = <0x00440000 0x03bc0000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/r8a7792.dtsi b/arch/arm/boot/dts/r8a7792.dtsi
index 3fd61d7..713141d 100644
--- a/arch/arm/boot/dts/r8a7792.dtsi
+++ b/arch/arm/boot/dts/r8a7792.dtsi
@@ -18,6 +18,22 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		spi0 = &qspi;
+		vin0 = &vin0;
+		vin1 = &vin1;
+		vin2 = &vin2;
+		vin3 = &vin3;
+		vin4 = &vin4;
+		vin5 = &vin5;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -108,6 +124,179 @@
 			#power-domain-cells = <1>;
 		};
 
+		pfc: pin-controller@e6060000 {
+			compatible = "renesas,pfc-r8a7792";
+			reg = <0 0xe6060000 0 0x144>;
+		};
+
+		gpio0: gpio@e6050000 {
+			compatible = "renesas,gpio-r8a7792",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6050000 0 0x50>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 0 29>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&mstp9_clks R8A7792_CLK_GPIO0>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+		};
+
+		gpio1: gpio@e6051000 {
+			compatible = "renesas,gpio-r8a7792",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6051000 0 0x50>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 32 23>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&mstp9_clks R8A7792_CLK_GPIO1>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+		};
+
+		gpio2: gpio@e6052000 {
+			compatible = "renesas,gpio-r8a7792",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6052000 0 0x50>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 64 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&mstp9_clks R8A7792_CLK_GPIO2>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+		};
+
+		gpio3: gpio@e6053000 {
+			compatible = "renesas,gpio-r8a7792",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6053000 0 0x50>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 96 28>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&mstp9_clks R8A7792_CLK_GPIO3>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+		};
+
+		gpio4: gpio@e6054000 {
+			compatible = "renesas,gpio-r8a7792",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6054000 0 0x50>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 128 17>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&mstp9_clks R8A7792_CLK_GPIO4>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+		};
+
+		gpio5: gpio@e6055000 {
+			compatible = "renesas,gpio-r8a7792",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6055000 0 0x50>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 160 17>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&mstp9_clks R8A7792_CLK_GPIO5>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+		};
+
+		gpio6: gpio@e6055100 {
+			compatible = "renesas,gpio-r8a7792",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6055100 0 0x50>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 192 17>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&mstp9_clks R8A7792_CLK_GPIO6>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+		};
+
+		gpio7: gpio@e6055200 {
+			compatible = "renesas,gpio-r8a7792",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6055200 0 0x50>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 224 17>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&mstp9_clks R8A7792_CLK_GPIO7>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+		};
+
+		gpio8: gpio@e6055300 {
+			compatible = "renesas,gpio-r8a7792",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6055300 0 0x50>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 256 17>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&mstp9_clks R8A7792_CLK_GPIO8>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+		};
+
+		gpio9: gpio@e6055400 {
+			compatible = "renesas,gpio-r8a7792",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6055400 0 0x50>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 288 17>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&mstp9_clks R8A7792_CLK_GPIO9>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+		};
+
+		gpio10: gpio@e6055500 {
+			compatible = "renesas,gpio-r8a7792",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6055500 0 0x50>;
+			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 320 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&mstp9_clks R8A7792_CLK_GPIO10>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+		};
+
+		gpio11: gpio@e6055600 {
+			compatible = "renesas,gpio-r8a7792",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6055600 0 0x50>;
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 352 30>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&mstp9_clks R8A7792_CLK_GPIO11>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+		};
+
 		dmac0: dma-controller@e6700000 {
 			compatible = "renesas,dmac-r8a7792",
 				     "renesas,rcar-dmac";
@@ -262,6 +451,18 @@
 			status = "disabled";
 		};
 
+		sdhi0: sd@ee100000 {
+			compatible = "renesas,sdhi-r8a7792";
+			reg = <0 0xee100000 0 0x328>;
+			interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dmac0 0xcd>, <&dmac0 0xce>,
+			       <&dmac1 0xcd>, <&dmac1 0xce>;
+			dma-names = "tx", "rx", "tx", "rx";
+			clocks = <&mstp3_clks R8A7792_CLK_SDHI0>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
 		jpu: jpeg-codec@fe980000 {
 			compatible = "renesas,jpu-r8a7792",
 				     "renesas,rcar-gen2-jpu";
@@ -271,6 +472,242 @@
 			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
 		};
 
+		avb: ethernet@e6800000 {
+			compatible = "renesas,etheravb-r8a7792",
+				     "renesas,etheravb-rcar-gen2";
+			reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
+			interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp8_clks R8A7792_CLK_ETHERAVB>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		/* I2C doesn't need pinmux */
+		i2c0: i2c@e6508000 {
+			compatible = "renesas,i2c-r8a7792";
+			reg = <0 0xe6508000 0 0x40>;
+			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp9_clks R8A7792_CLK_I2C0>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			i2c-scl-internal-delay-ns = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e6518000 {
+			compatible = "renesas,i2c-r8a7792";
+			reg = <0 0xe6518000 0 0x40>;
+			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp9_clks R8A7792_CLK_I2C1>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			i2c-scl-internal-delay-ns = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e6530000 {
+			compatible = "renesas,i2c-r8a7792";
+			reg = <0 0xe6530000 0 0x40>;
+			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp9_clks R8A7792_CLK_I2C2>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			i2c-scl-internal-delay-ns = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e6540000 {
+			compatible = "renesas,i2c-r8a7792";
+			reg = <0 0xe6540000 0 0x40>;
+			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp9_clks R8A7792_CLK_I2C3>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			i2c-scl-internal-delay-ns = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@e6520000 {
+			compatible = "renesas,i2c-r8a7792";
+			reg = <0 0xe6520000 0 0x40>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp9_clks R8A7792_CLK_I2C4>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			i2c-scl-internal-delay-ns = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@e6528000 {
+			compatible = "renesas,i2c-r8a7792";
+			reg = <0 0xe6528000 0 0x40>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp9_clks R8A7792_CLK_I2C5>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			i2c-scl-internal-delay-ns = <110>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		qspi: spi@e6b10000 {
+			compatible = "renesas,qspi-r8a7792", "renesas,qspi";
+			reg = <0 0xe6b10000 0 0x2c>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp9_clks R8A7792_CLK_QSPI_MOD>;
+			dmas = <&dmac0 0x17>, <&dmac0 0x18>,
+			       <&dmac1 0x17>, <&dmac1 0x18>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		du: display@feb00000 {
+			compatible = "renesas,du-r8a7792";
+			reg = <0 0xfeb00000 0 0x40000>;
+			reg-names = "du";
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp7_clks R8A7792_CLK_DU0>,
+				 <&mstp7_clks R8A7792_CLK_DU1>;
+			clock-names = "du.0", "du.1";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					du_out_rgb0: endpoint {
+					};
+				};
+				port@1 {
+					reg = <1>;
+					du_out_rgb1: endpoint {
+					};
+				};
+			};
+		};
+
+		can0: can@e6e80000 {
+			compatible = "renesas,can-r8a7792",
+				     "renesas,rcar-gen2-can";
+			reg = <0 0xe6e80000 0 0x1000>;
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp9_clks R8A7792_CLK_CAN0>,
+				 <&rcan_clk>, <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		can1: can@e6e88000 {
+			compatible = "renesas,can-r8a7792",
+				     "renesas,rcar-gen2-can";
+			reg = <0 0xe6e88000 0 0x1000>;
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp9_clks R8A7792_CLK_CAN1>,
+				 <&rcan_clk>, <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		vin0: video@e6ef0000 {
+			compatible = "renesas,vin-r8a7792",
+				     "renesas,rcar-gen2-vin";
+			reg = <0 0xe6ef0000 0 0x1000>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp8_clks R8A7792_CLK_VIN0>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		vin1: video@e6ef1000 {
+			compatible = "renesas,vin-r8a7792",
+				     "renesas,rcar-gen2-vin";
+			reg = <0 0xe6ef1000 0 0x1000>;
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp8_clks R8A7792_CLK_VIN1>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		vin2: video@e6ef2000 {
+			compatible = "renesas,vin-r8a7792",
+				     "renesas,rcar-gen2-vin";
+			reg = <0 0xe6ef2000 0 0x1000>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp8_clks R8A7792_CLK_VIN2>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		vin3: video@e6ef3000 {
+			compatible = "renesas,vin-r8a7792",
+				     "renesas,rcar-gen2-vin";
+			reg = <0 0xe6ef3000 0 0x1000>;
+			interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp8_clks R8A7792_CLK_VIN3>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		vin4: video@e6ef4000 {
+			compatible = "renesas,vin-r8a7792",
+				     "renesas,rcar-gen2-vin";
+			reg = <0 0xe6ef4000 0 0x1000>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp8_clks R8A7792_CLK_VIN4>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		vin5: video@e6ef5000 {
+			compatible = "renesas,vin-r8a7792",
+				     "renesas,rcar-gen2-vin";
+			reg = <0 0xe6ef5000 0 0x1000>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp8_clks R8A7792_CLK_VIN5>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		vsp1@fe928000 {
+			compatible = "renesas,vsp1";
+			reg = <0 0xfe928000 0 0x8000>;
+			interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp1_clks R8A7792_CLK_VSP1_SY>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+		};
+
+		vsp1@fe930000 {
+			compatible = "renesas,vsp1";
+			reg = <0 0xfe930000 0 0x8000>;
+			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp1_clks R8A7792_CLK_VSP1DU0>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+		};
+
+		vsp1@fe938000 {
+			compatible = "renesas,vsp1";
+			reg = <0 0xfe938000 0 0x8000>;
+			interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp1_clks R8A7792_CLK_VSP1DU1>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+		};
+
 		/* Special CPG clocks */
 		cpg_clocks: cpg_clocks@e6150000 {
 			compatible = "renesas,r8a7792-cpg-clocks",
@@ -291,6 +728,13 @@
 			clock-div = <2>;
 			clock-mult = <1>;
 		};
+		zx_clk: zx {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7792_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <3>;
+			clock-mult = <1>;
+		};
 		zs_clk: zs {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks R8A7792_CLK_PLL1>;
@@ -298,6 +742,13 @@
 			clock-div = <6>;
 			clock-mult = <1>;
 		};
+		hp_clk: hp {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7792_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <12>;
+			clock-mult = <1>;
+		};
 		p_clk: p {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks R8A7792_CLK_PLL1>;
@@ -319,16 +770,42 @@
 			clock-div = <8>;
 			clock-mult = <1>;
 		};
+		sd_clk: sd {
+			compatible = "fixed-factor-clock";
+			clocks = <&pll1_div2_clk>;
+			#clock-cells = <0>;
+			clock-div = <8>;
+			clock-mult = <1>;
+		};
+		rcan_clk: rcan {
+			compatible = "fixed-factor-clock";
+			clocks = <&pll1_div2_clk>;
+			#clock-cells = <0>;
+			clock-div = <49>;
+			clock-mult = <1>;
+		};
+		zg_clk: zg {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7792_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <5>;
+			clock-mult = <1>;
+		};
 
 		/* Gate clocks */
 		mstp1_clks: mstp1_clks@e6150134 {
 			compatible = "renesas,r8a7792-mstp-clocks",
 				     "renesas,cpg-mstp-clocks";
 			reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>;
-			clocks = <&m2_clk>;
+			clocks = <&m2_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>;
 			#clock-cells = <1>;
-			clock-indices = <R8A7792_CLK_JPU>;
-			clock-output-names = "jpu";
+			clock-indices = <
+				R8A7792_CLK_JPU
+				R8A7792_CLK_VSP1DU1 R8A7792_CLK_VSP1DU0
+				R8A7792_CLK_VSP1_SY
+			>;
+			clock-output-names = "jpu", "vsp1du1", "vsp1du0",
+					     "vsp1-sy";
 		};
 		mstp2_clks: mstp2_clks@e6150138 {
 			compatible = "renesas,r8a7792-mstp-clocks",
@@ -341,6 +818,15 @@
 			>;
 			clock-output-names = "sys-dmac1", "sys-dmac0";
 		};
+		mstp3_clks: mstp3_clks@e615013c {
+			compatible = "renesas,r8a7792-mstp-clocks",
+				     "renesas,cpg-mstp-clocks";
+			reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>;
+			clocks = <&sd_clk>;
+			#clock-cells = <1>;
+			renesas,clock-indices = <R8A7792_CLK_SDHI0>;
+			clock-output-names = "sdhi0";
+		};
 		mstp4_clks: mstp4_clks@e6150140 {
 			compatible = "renesas,r8a7792-mstp-clocks",
 				     "renesas,cpg-mstp-clocks";
@@ -355,15 +841,65 @@
 				     "renesas,cpg-mstp-clocks";
 			reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>;
 			clocks = <&zs_clk>, <&zs_clk>, <&p_clk>, <&p_clk>,
-				 <&p_clk>, <&p_clk>;
+				 <&p_clk>, <&p_clk>, <&zx_clk>, <&zx_clk>;
 			#clock-cells = <1>;
 			clock-indices = <
 				R8A7792_CLK_HSCIF1 R8A7792_CLK_HSCIF0
 				R8A7792_CLK_SCIF3 R8A7792_CLK_SCIF2
 				R8A7792_CLK_SCIF1 R8A7792_CLK_SCIF0
+				R8A7792_CLK_DU1 R8A7792_CLK_DU0
 			>;
 			clock-output-names = "hscif1", "hscif0", "scif3",
-					     "scif2", "scif1", "scif0";
+					     "scif2", "scif1", "scif0",
+					     "du1", "du0";
+		};
+		mstp8_clks: mstp8_clks@e6150990 {
+			compatible = "renesas,r8a7792-mstp-clocks",
+				     "renesas,cpg-mstp-clocks";
+			reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>;
+			clocks = <&zg_clk>, <&zg_clk>, <&zg_clk>, <&zg_clk>,
+			         <&zg_clk>, <&zg_clk>, <&hp_clk>;
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A7792_CLK_VIN5 R8A7792_CLK_VIN4
+				R8A7792_CLK_VIN3 R8A7792_CLK_VIN2
+				R8A7792_CLK_VIN1 R8A7792_CLK_VIN0
+				R8A7792_CLK_ETHERAVB
+			>;
+			clock-output-names = "vin5", "vin4", "vin3", "vin2",
+					     "vin1", "vin0", "etheravb";
+		};
+		mstp9_clks: mstp9_clks@e6150994 {
+			compatible = "renesas,r8a7792-mstp-clocks",
+				     "renesas,cpg-mstp-clocks";
+			reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>;
+			clocks = <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>,
+				 <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>,
+				 <&cp_clk>, <&cp_clk>, <&p_clk>, <&p_clk>,
+				 <&cpg_clocks R8A7792_CLK_QSPI>,
+				 <&cp_clk>, <&cp_clk>, <&hp_clk>, <&hp_clk>,
+				 <&hp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>;
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A7792_CLK_GPIO7 R8A7792_CLK_GPIO6
+				R8A7792_CLK_GPIO5 R8A7792_CLK_GPIO4
+				R8A7792_CLK_GPIO3 R8A7792_CLK_GPIO2
+				R8A7792_CLK_GPIO1 R8A7792_CLK_GPIO0
+				R8A7792_CLK_GPIO11 R8A7792_CLK_GPIO10
+				R8A7792_CLK_CAN1 R8A7792_CLK_CAN0
+				R8A7792_CLK_QSPI_MOD
+				R8A7792_CLK_GPIO9 R8A7792_CLK_GPIO8
+				R8A7792_CLK_I2C5 R8A7792_CLK_I2C4
+				R8A7792_CLK_I2C3 R8A7792_CLK_I2C2
+				R8A7792_CLK_I2C1 R8A7792_CLK_I2C0
+			>;
+			clock-output-names =
+				"gpio7", "gpio6", "gpio5", "gpio4",
+				"gpio3", "gpio2", "gpio1", "gpio0",
+				"gpio11", "gpio10", "can1", "can0",
+				"qspi_mod", "gpio9", "gpio8",
+				"i2c5", "i2c4", "i2c3", "i2c2",
+				"i2c1", "i2c0";
 		};
 	};
 
@@ -382,4 +918,12 @@
 		/* This value must be overridden by the board. */
 		clock-frequency = <0>;
 	};
+
+	/* External CAN clock */
+	can_clk: can {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board. */
+		clock-frequency = <0>;
+	};
 };
diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts
index 1ad37d4..8d1b35a 100644
--- a/arch/arm/boot/dts/r8a7794-alt.dts
+++ b/arch/arm/boot/dts/r8a7794-alt.dts
@@ -10,6 +10,7 @@
 
 /dts-v1/;
 #include "r8a7794.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "Alt";
@@ -29,6 +30,63 @@
 		reg = <0 0x40000000 0 0x40000000>;
 	};
 
+	d3_3v: regulator-d3-3v {
+		compatible = "regulator-fixed";
+		regulator-name = "D3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc_sdhi0: regulator-vcc-sdhi0 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio2 26 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi0: regulator-vccq-sdhi0 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1
+			  1800000 0>;
+	};
+
+	vcc_sdhi1: regulator-vcc-sdhi1 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI1 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio4 26 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi1: regulator-vccq-sdhi1 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI1 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1
+			  1800000 0>;
+	};
+
 	lbsc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -140,6 +198,21 @@
 		groups = "vin0_data8", "vin0_clk";
 		function = "vin0";
 	};
+
+	mmcif0_pins: mmcif0 {
+		groups = "mmc_data8", "mmc_ctrl";
+		function = "mmc";
+	};
+
+	sdhi0_pins: sd0 {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+	};
+
+	sdhi1_pins: sd1 {
+		groups = "sdhi1_data4", "sdhi1_ctrl";
+		function = "sdhi1";
+	};
 };
 
 &cmt0 {
@@ -169,6 +242,39 @@
 	};
 };
 
+&mmcif0 {
+	pinctrl-0 = <&mmcif0_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&d3_3v>;
+	vqmmc-supply = <&d3_3v>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&vcc_sdhi0>;
+	vqmmc-supply = <&vccq_sdhi0>;
+	cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio6 7 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&sdhi1 {
+	pinctrl-0 = <&sdhi1_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&vcc_sdhi1>;
+	vqmmc-supply = <&vccq_sdhi1>;
+	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
 &i2c1 {
 	pinctrl-0 = <&i2c1_pins>;
 	pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/r8a7794-silk.dts b/arch/arm/boot/dts/r8a7794-silk.dts
index cf24f45..cf880ac 100644
--- a/arch/arm/boot/dts/r8a7794-silk.dts
+++ b/arch/arm/boot/dts/r8a7794-silk.dts
@@ -10,6 +10,17 @@
  * kind, whether express or implied.
  */
 
+/*
+ * SSI-AK4643
+ *
+ * SW1: 2-1: AK4643
+ *      2-3: ADV7511
+ *
+ * This command is required before playback/capture:
+ *
+ *	amixer set "LINEOUT Mixer DACL" on
+ */
+
 /dts-v1/;
 #include "r8a7794.dtsi"
 #include <dt-bindings/gpio/gpio.h>
@@ -119,6 +130,29 @@
 		#clock-cells = <0>;
 		clock-frequency = <74250000>;
 	};
+
+	x9_clk: audio_clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12288000>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+
+		simple-audio-card,format = "left_j";
+		simple-audio-card,bitclock-master = <&soundcodec>;
+		simple-audio-card,frame-master = <&soundcodec>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&rcar_sound>;
+		};
+
+		soundcodec: simple-audio-card,codec {
+			sound-dai = <&ak4643>;
+			clocks = <&x9_clk>;
+		};
+	};
 };
 
 &extal_clk {
@@ -193,6 +227,16 @@
 		groups = "du1_rgb666", "du1_sync", "du1_disp", "du1_clk0_out";
 		function = "du1";
 	};
+
+	ssi_pins: sound {
+		groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
+		function = "ssi";
+	};
+
+	audio_clk_pins: audio_clk {
+		groups = "audio_clkc";
+		function = "audio_clk";
+	};
 };
 
 &scif2 {
@@ -230,6 +274,12 @@
 	status = "okay";
 	clock-frequency = <400000>;
 
+	ak4643: codec@12 {
+		compatible = "asahi-kasei,ak4643";
+		#sound-dai-cells = <0>;
+		reg = <0x12>;
+	};
+
 	composite-in@20 {
 		compatible = "adi,adv7180";
 		reg = <0x20>;
@@ -392,3 +442,23 @@
 		};
 	};
 };
+
+&rcar_sound {
+	pinctrl-0 = <&ssi_pins &audio_clk_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	/* Single DAI */
+	#sound-dai-cells = <0>;
+
+	rcar_sound,dai {
+		dai0 {
+			playback = <&ssi0>;
+			capture  = <&ssi1>;
+		};
+	};
+};
+
+&ssi1 {
+	shared-pin;
+};
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index 685f986..9365580 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -296,6 +296,34 @@
 		dma-channels = <15>;
 	};
 
+	audma0: dma-controller@ec700000 {
+		compatible = "renesas,dmac-r8a7794", "renesas,rcar-dmac";
+		reg = <0 0xec700000 0 0x10000>;
+		interrupts =	<GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "error",
+				  "ch0", "ch1", "ch2", "ch3", "ch4", "ch5",
+				  "ch6", "ch7", "ch8", "ch9", "ch10", "ch11",
+				  "ch12";
+		clocks = <&mstp5_clks R8A7794_CLK_AUDIO_DMAC0>;
+		clock-names = "fck";
+		power-domains = <&cpg_clocks>;
+		#dma-cells = <1>;
+		dma-channels = <13>;
+	};
+
 	scifa0: serial@e6c40000 {
 		compatible = "renesas,scifa-r8a7794",
 			     "renesas,rcar-gen2-scifa", "renesas,scifa";
@@ -697,7 +725,7 @@
 
 	sdhi0: sd@ee100000 {
 		compatible = "renesas,sdhi-r8a7794";
-		reg = <0 0xee100000 0 0x200>;
+		reg = <0 0xee100000 0 0x328>;
 		interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7794_CLK_SDHI0>;
 		dmas = <&dmac0 0xcd>, <&dmac0 0xce>,
@@ -866,6 +894,22 @@
 		};
 	};
 
+	vsp1@fe928000 {
+		compatible = "renesas,vsp1";
+		reg = <0 0xfe928000 0 0x8000>;
+		interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp1_clks R8A7794_CLK_VSP1_S>;
+		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+	};
+
+	vsp1@fe930000 {
+		compatible = "renesas,vsp1";
+		reg = <0 0xfe930000 0 0x8000>;
+		interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp1_clks R8A7794_CLK_VSP1_DU0>;
+		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+	};
+
 	du: display@feb00000 {
 		compatible = "renesas,du-r8a7794";
 		reg = <0 0xfeb00000 0 0x40000>;
@@ -952,6 +996,27 @@
 			clock-frequency = <0>;
 		};
 
+		/*
+		 * The external audio clocks are configured  as 0 Hz fixed
+		 * frequency clocks by default.  Boards that provide audio
+		 * clocks should override them.
+		 */
+		audio_clka: audio_clka {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+		audio_clkb: audio_clkb {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+		audio_clkc: audio_clkc {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
 		/* Special CPG clocks */
 		cpg_clocks: cpg_clocks@e6150000 {
 			compatible = "renesas,r8a7794-cpg-clocks",
@@ -1183,6 +1248,15 @@
 			clock-indices = <R8A7794_CLK_IRQC>;
 			clock-output-names = "irqc";
 		};
+		mstp5_clks: mstp5_clks@e6150144 {
+			compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>;
+			clocks = <&hp_clk>, <&p_clk>;
+			#clock-cells = <1>;
+			clock-indices = <R8A7794_CLK_AUDIO_DMAC0
+					 R8A7794_CLK_PWM>;
+			clock-output-names = "audmac0", "pwm";
+		};
 		mstp7_clks: mstp7_clks@e615014c {
 			compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>;
@@ -1237,6 +1311,58 @@
 				"gpio1", "gpio0", "rcan1", "rcan0", "qspi_mod",
 				"i2c5", "i2c4", "i2c3", "i2c2", "i2c1", "i2c0";
 		};
+		mstp10_clks: mstp10_clks@e6150998 {
+			compatible = "renesas,r8a7794-mstp-clocks",
+				     "renesas,cpg-mstp-clocks";
+			reg = <0 0xe6150998 0 4>, <0 0xe61509a8 0 4>;
+			clocks = <&p_clk>,
+				 <&mstp10_clks R8A7794_CLK_SSI_ALL>,
+				 <&mstp10_clks R8A7794_CLK_SSI_ALL>,
+				 <&mstp10_clks R8A7794_CLK_SSI_ALL>,
+				 <&mstp10_clks R8A7794_CLK_SSI_ALL>,
+				 <&mstp10_clks R8A7794_CLK_SSI_ALL>,
+				 <&mstp10_clks R8A7794_CLK_SSI_ALL>,
+				 <&mstp10_clks R8A7794_CLK_SSI_ALL>,
+				 <&mstp10_clks R8A7794_CLK_SSI_ALL>,
+				 <&mstp10_clks R8A7794_CLK_SSI_ALL>,
+				 <&mstp10_clks R8A7794_CLK_SSI_ALL>,
+				 <&p_clk>,
+				 <&mstp10_clks R8A7794_CLK_SCU_ALL>,
+				 <&mstp10_clks R8A7794_CLK_SCU_ALL>,
+				 <&mstp10_clks R8A7794_CLK_SCU_ALL>,
+				 <&mstp10_clks R8A7794_CLK_SCU_ALL>,
+				 <&mstp10_clks R8A7794_CLK_SCU_ALL>,
+				 <&mstp10_clks R8A7794_CLK_SCU_ALL>,
+				 <&mstp10_clks R8A7794_CLK_SCU_ALL>,
+				 <&mstp10_clks R8A7794_CLK_SCU_ALL>,
+				 <&mstp10_clks R8A7794_CLK_SCU_ALL>,
+				 <&mstp10_clks R8A7794_CLK_SCU_ALL>;
+			#clock-cells = <1>;
+			clock-indices = <R8A7794_CLK_SSI_ALL
+					 R8A7794_CLK_SSI9 R8A7794_CLK_SSI8
+					 R8A7794_CLK_SSI7 R8A7794_CLK_SSI6
+					 R8A7794_CLK_SSI5 R8A7794_CLK_SSI4
+					 R8A7794_CLK_SSI3 R8A7794_CLK_SSI2
+					 R8A7794_CLK_SSI1 R8A7794_CLK_SSI0
+					 R8A7794_CLK_SCU_ALL
+					 R8A7794_CLK_SCU_DVC1
+					 R8A7794_CLK_SCU_DVC0
+					 R8A7794_CLK_SCU_CTU1_MIX1
+					 R8A7794_CLK_SCU_CTU0_MIX0
+					 R8A7794_CLK_SCU_SRC6
+					 R8A7794_CLK_SCU_SRC5
+					 R8A7794_CLK_SCU_SRC4
+					 R8A7794_CLK_SCU_SRC3
+					 R8A7794_CLK_SCU_SRC2
+					 R8A7794_CLK_SCU_SRC1>;
+			clock-output-names = "ssi-all", "ssi9", "ssi8", "ssi7",
+					     "ssi6", "ssi5", "ssi4", "ssi3",
+					     "ssi2", "ssi1", "ssi0",
+					     "scu-all", "scu-dvc1", "scu-dvc0",
+					     "scu-ctu1-mix1", "scu-ctu0-mix0",
+					     "scu-src6", "scu-src5", "scu-src4",
+					     "scu-src3", "scu-src2", "scu-src1";
+		};
 		mstp11_clks: mstp11_clks@e615099c {
 			compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0 0xe615099c 0 4>, <0 0xe61509ac 0 4>;
@@ -1306,4 +1432,185 @@
 		#iommu-cells = <1>;
 		status = "disabled";
 	};
+
+	rcar_sound: sound@ec500000 {
+		/*
+		 * #sound-dai-cells is required
+		 *
+		 * Single DAI : #sound-dai-cells = <0>;         <&rcar_sound>;
+		 * Multi  DAI : #sound-dai-cells = <1>;         <&rcar_sound N>;
+		 */
+		compatible = "renesas,rcar_sound-r8a7794",
+			     "renesas,rcar_sound-gen2";
+		reg =	<0 0xec500000 0 0x1000>, /* SCU */
+			<0 0xec5a0000 0 0x100>,  /* ADG */
+			<0 0xec540000 0 0x1000>, /* SSIU */
+			<0 0xec541000 0 0x280>,  /* SSI */
+			<0 0xec740000 0 0x200>;  /* Audio DMAC peri peri */
+		reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
+
+		clocks = <&mstp10_clks R8A7794_CLK_SSI_ALL>,
+			 <&mstp10_clks R8A7794_CLK_SSI9>,
+			 <&mstp10_clks R8A7794_CLK_SSI8>,
+			 <&mstp10_clks R8A7794_CLK_SSI7>,
+			 <&mstp10_clks R8A7794_CLK_SSI6>,
+			 <&mstp10_clks R8A7794_CLK_SSI5>,
+			 <&mstp10_clks R8A7794_CLK_SSI4>,
+			 <&mstp10_clks R8A7794_CLK_SSI3>,
+			 <&mstp10_clks R8A7794_CLK_SSI2>,
+			 <&mstp10_clks R8A7794_CLK_SSI1>,
+			 <&mstp10_clks R8A7794_CLK_SSI0>,
+			 <&mstp10_clks R8A7794_CLK_SCU_SRC6>,
+			 <&mstp10_clks R8A7794_CLK_SCU_SRC5>,
+			 <&mstp10_clks R8A7794_CLK_SCU_SRC4>,
+			 <&mstp10_clks R8A7794_CLK_SCU_SRC3>,
+			 <&mstp10_clks R8A7794_CLK_SCU_SRC2>,
+			 <&mstp10_clks R8A7794_CLK_SCU_SRC1>,
+			 <&mstp10_clks R8A7794_CLK_SCU_CTU0_MIX0>,
+			 <&mstp10_clks R8A7794_CLK_SCU_CTU1_MIX1>,
+			 <&mstp10_clks R8A7794_CLK_SCU_CTU0_MIX0>,
+			 <&mstp10_clks R8A7794_CLK_SCU_CTU1_MIX1>,
+			 <&mstp10_clks R8A7794_CLK_SCU_DVC0>,
+			 <&mstp10_clks R8A7794_CLK_SCU_DVC1>,
+			 <&audio_clka>, <&audio_clkb>, <&audio_clkc>,
+			 <&m2_clk>;
+		clock-names = "ssi-all",
+			      "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5",
+			      "ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0",
+			      "src.6", "src.5", "src.4", "src.3", "src.2",
+			      "src.1",
+			      "ctu.0", "ctu.1",
+			      "mix.0", "mix.1",
+			      "dvc.0", "dvc.1",
+			      "clk_a", "clk_b", "clk_c", "clk_i";
+		power-domains = <&cpg_clocks>;
+
+		status = "disabled";
+
+		rcar_sound,dvc {
+			dvc0: dvc@0 {
+				dmas = <&audma0 0xbc>;
+				dma-names = "tx";
+			};
+			dvc1: dvc@1 {
+				dmas = <&audma0 0xbe>;
+				dma-names = "tx";
+			};
+		};
+
+		rcar_sound,mix {
+			mix0: mix@0 { };
+			mix1: mix@1 { };
+		};
+
+		rcar_sound,ctu {
+			ctu00: ctu@0 { };
+			ctu01: ctu@1 { };
+			ctu02: ctu@2 { };
+			ctu03: ctu@3 { };
+			ctu10: ctu@4 { };
+			ctu11: ctu@5 { };
+			ctu12: ctu@6 { };
+			ctu13: ctu@7 { };
+		};
+
+		rcar_sound,src {
+			src@0 {
+				status = "disabled";
+			};
+			src1: src@1 {
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x87>, <&audma0 0x9c>;
+				dma-names = "rx", "tx";
+			};
+			src2: src@2 {
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x89>, <&audma0 0x9e>;
+				dma-names = "rx", "tx";
+			};
+			src3: src@3 {
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x8b>, <&audma0 0xa0>;
+				dma-names = "rx", "tx";
+			};
+			src4: src@4 {
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x8d>, <&audma0 0xb0>;
+				dma-names = "rx", "tx";
+			};
+			src5: src@5 {
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x8f>, <&audma0 0xb2>;
+				dma-names = "rx", "tx";
+			};
+			src6: src@6 {
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x91>, <&audma0 0xb4>;
+				dma-names = "rx", "tx";
+			};
+		};
+
+		rcar_sound,ssi {
+			ssi0: ssi@0 {
+				interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x01>, <&audma0 0x02>,
+				       <&audma0 0x15>, <&audma0 0x16>;
+				dma-names = "rx", "tx", "rxu", "txu";
+			};
+			ssi1: ssi@1 {
+				interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x03>, <&audma0 0x04>,
+				       <&audma0 0x49>, <&audma0 0x4a>;
+				dma-names = "rx", "tx", "rxu", "txu";
+			};
+			ssi2: ssi@2 {
+				interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x05>, <&audma0 0x06>,
+				       <&audma0 0x63>, <&audma0 0x64>;
+				dma-names = "rx", "tx", "rxu", "txu";
+			};
+			ssi3: ssi@3 {
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x07>, <&audma0 0x08>,
+				       <&audma0 0x6f>, <&audma0 0x70>;
+				dma-names = "rx", "tx", "rxu", "txu";
+			};
+			ssi4: ssi@4 {
+				interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x09>, <&audma0 0x0a>,
+				       <&audma0 0x71>, <&audma0 0x72>;
+				dma-names = "rx", "tx", "rxu", "txu";
+			};
+			ssi5: ssi@5 {
+				interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x0b>, <&audma0 0x0c>,
+				       <&audma0 0x73>, <&audma0 0x74>;
+				dma-names = "rx", "tx", "rxu", "txu";
+			};
+			ssi6: ssi@6 {
+				interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x0d>, <&audma0 0x0e>,
+				       <&audma0 0x75>, <&audma0 0x76>;
+				dma-names = "rx", "tx", "rxu", "txu";
+			};
+			ssi7: ssi@7 {
+				interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x0f>, <&audma0 0x10>,
+				       <&audma0 0x79>, <&audma0 0x7a>;
+				dma-names = "rx", "tx", "rxu", "txu";
+			};
+			ssi8: ssi@8 {
+				interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x11>, <&audma0 0x12>,
+				       <&audma0 0x7b>, <&audma0 0x7c>;
+				dma-names = "rx", "tx", "rxu", "txu";
+			};
+			ssi9: ssi@9 {
+				interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x13>, <&audma0 0x14>,
+				       <&audma0 0x7d>, <&audma0 0x7e>;
+				dma-names = "rx", "tx", "rxu", "txu";
+			};
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi
index 843d2be..a935523 100644
--- a/arch/arm/boot/dts/rk3036.dtsi
+++ b/arch/arm/boot/dts/rk3036.dtsi
@@ -43,6 +43,7 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/pinctrl/rockchip.h>
 #include <dt-bindings/clock/rk3036-cru.h>
+#include <dt-bindings/soc/rockchip,boot-mode.h>
 #include "skeleton.dtsi"
 
 / {
@@ -313,8 +314,17 @@
 	};
 
 	grf: syscon@20008000 {
-		compatible = "rockchip,rk3036-grf", "syscon";
+		compatible = "rockchip,rk3036-grf", "syscon", "simple-mfd";
 		reg = <0x20008000 0x1000>;
+
+		reboot-mode {
+			compatible = "syscon-reboot-mode";
+			offset = <0x1d8>;
+			mode-normal = <BOOT_NORMAL>;
+			mode-recovery = <BOOT_RECOVERY>;
+			mode-bootloader = <BOOT_FASTBOOT>;
+			mode-loader = <BOOT_BL_DOWNLOAD>;
+		};
 	};
 
 	acodec: acodec-ana@20030000 {
diff --git a/arch/arm/boot/dts/rk3288-evb-act8846.dts b/arch/arm/boot/dts/rk3288-evb-act8846.dts
index 452ca24..041dd5d 100644
--- a/arch/arm/boot/dts/rk3288-evb-act8846.dts
+++ b/arch/arm/boot/dts/rk3288-evb-act8846.dts
@@ -206,6 +206,10 @@
 	};
 };
 
+&panel {
+	power-supply = <&vcc_lcd>;
+};
+
 &pinctrl {
 	lcd {
 		lcd_en: lcd-en  {
diff --git a/arch/arm/boot/dts/rk3288-evb-rk808.dts b/arch/arm/boot/dts/rk3288-evb-rk808.dts
index 736b08b..44ebc6e 100644
--- a/arch/arm/boot/dts/rk3288-evb-rk808.dts
+++ b/arch/arm/boot/dts/rk3288-evb-rk808.dts
@@ -233,3 +233,7 @@
 		};
 	};
 };
+
+&panel {
+	power-supply = <&vcc_lcd>;
+};
diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi
index 963365d..d59208b 100644
--- a/arch/arm/boot/dts/rk3288-evb.dtsi
+++ b/arch/arm/boot/dts/rk3288-evb.dtsi
@@ -48,7 +48,7 @@
 		reg = <0x0 0x80000000>;
 	};
 
-	backlight {
+	backlight: backlight {
 		compatible = "pwm-backlight";
 		brightness-levels = <
 			  0   1   2   3   4   5   6   7
@@ -97,6 +97,21 @@
 		#clock-cells = <0>;
 	};
 
+	panel: panel {
+		compatible ="lg,lp079qx1-sp0v", "simple-panel";
+		backlight = <&backlight>;
+		enable-gpios = <&gpio7 4 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&lcd_cs>;
+
+		ports {
+			panel_in: port {
+				panel_in_edp: endpoint {
+					remote-endpoint = <&edp_out_panel>;
+				};
+			};
+		};
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 		autorepeat;
@@ -170,6 +185,28 @@
 	cpu0-supply = <&vdd_cpu>;
 };
 
+&edp {
+	force-hpd;
+	status = "okay";
+
+	ports {
+		edp_out: port@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			edp_out_panel: endpoint {
+				reg = <0>;
+				remote-endpoint = <&panel_in_edp>;
+			};
+		};
+	};
+};
+
+&edp_phy {
+	status = "okay";
+};
+
 &emmc {
 	bus-width = <8>;
 	cap-mmc-highspeed;
@@ -280,6 +317,12 @@
 		};
 	};
 
+	lcd {
+		lcd_cs: lcd-cs {
+			rockchip,pins = <7 4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	pmic {
 		pmic_int: pmic-int {
 			rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
diff --git a/arch/arm/boot/dts/rk3288-fennec.dts b/arch/arm/boot/dts/rk3288-fennec.dts
new file mode 100644
index 0000000..2e3c341
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-fennec.dts
@@ -0,0 +1,382 @@
+/*
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "rk3288.dtsi"
+
+/ {
+	model = "Rockchip RK3288 Fennec Board";
+	compatible = "rockchip,rk3288-fennec", "rockchip,rk3288";
+
+	memory {
+		reg = <0x0 0x80000000>;
+		device_type = "memory";
+	};
+
+	ext_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+		clock-output-names = "ext_gmac";
+	};
+
+	vcc_sys: vsys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&cpu0 {
+	cpu0-supply = <&vdd_cpu>;
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	disable-wp;
+	non-removable;
+	num-slots = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_MAC>;
+	assigned-clock-parents = <&ext_gmac>;
+	clock_in_out = "input";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>, <&phy_rst>, <&phy_pmeb>, <&phy_int>;
+	phy-supply = <&vcc_lan>;
+	phy-mode = "rgmii";
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 1000000>;
+	snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>;
+	tx_delay = <0x30>;
+	rx_delay = <0x10>;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk808-clkout2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int &global_pwroff>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc6-supply = <&vcc_sys>;
+		vcc7-supply = <&vcc_sys>;
+		vcc8-supply = <&vcc_io>;
+		vcc9-supply = <&vcc_io>;
+		vcc10-supply = <&vcc_io>;
+		vcc11-supply = <&vcc_io>;
+		vcc12-supply = <&vcc_io>;
+		vddio-supply = <&vcc_io>;
+
+		regulators {
+			vdd_cpu: DCDC_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-name = "vdd_arm";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-name = "vdd_gpu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc_ddr";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_io: DCDC_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_io";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vccio_pmu: LDO_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_pmu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcca_33: LDO_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcca_33";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_10: LDO_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-name = "vdd_10";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc_wl: LDO_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_wl";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_sd";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vdd10_lcd: LDO_REG6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-name = "vdd10_lcd";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc_18: LDO_REG7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_18";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc18_lcd: LDO_REG8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc18_lcd";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_sd: SWITCH_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc_sd";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_lan: SWITCH_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc_lan";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&pinctrl {
+	pcfg_output_high: pcfg-output-high {
+		output-high;
+	};
+
+	pcfg_output_low: pcfg-output-low {
+		output-low;
+	};
+
+	pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
+		drive-strength = <8>;
+	};
+
+	pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
+		bias-pull-up;
+		drive-strength = <8>;
+	};
+
+	gmac {
+		phy_int: phy-int {
+			rockchip,pins = <0 9 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		phy_pmeb: phy-pmeb {
+			rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		phy_rst: phy-rst {
+			rockchip,pins = <4 8 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+	};
+
+	pmic {
+		pmic_int: pmic-int {
+			rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usbphy {
+		host_drv: host-drv {
+			rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&host_drv>;
+	vbus_drv-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host1 {
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+};
+
+&usb_hsic {
+	status = "okay";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi b/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi
new file mode 100644
index 0000000..ec418c9
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi
@@ -0,0 +1,310 @@
+/*
+ * Device tree file for Firefly Rockchip RK3288 Core board
+ * Copyright (c) 2016 Randy Li <ayaka@soulik.info>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/input/input.h>
+#include "rk3288.dtsi"
+
+/ {
+	memory {
+		device_type = "memory";
+		reg = <0 0x80000000>;
+	};
+
+	ext_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+		clock-output-names = "ext_gmac";
+	};
+
+
+	vcc_flash: flash-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_flash";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_io>;
+	};
+};
+
+&cpu0 {
+	cpu0-supply = <&vdd_cpu>;
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	disable-wp;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	non-removable;
+	num-slots = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_pwr>, <&emmc_bus8>;
+	vmmc-supply = <&vcc_io>;
+	vqmmc-supply = <&vcc_flash>;
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_MAC>;
+	assigned-clock-parents = <&ext_gmac>;
+	clock_in_out = "input";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>, <&phy_rst>, <&phy_pmeb>, <&phy_int>;
+	phy-supply = <&vcc_lan>;
+	phy-mode = "rgmii";
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 1000000>;
+	snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>;
+	tx_delay = <0x30>;
+	rx_delay = <0x10>;
+	status = "ok";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	vdd_cpu: syr827@40 {
+		compatible = "silergy,syr827";
+		fcs,suspend-voltage-selector = <1>;
+		reg = <0x40>;
+		regulator-name = "vdd_cpu";
+		regulator-min-microvolt = <850000>;
+		regulator-max-microvolt = <1350000>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-enable-ramp-delay = <300>;
+		regulator-ramp-delay = <8000>;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vdd_gpu: syr828@41 {
+		compatible = "silergy,syr828";
+		fcs,suspend-voltage-selector = <1>;
+		reg = <0x41>;
+		regulator-name = "vdd_gpu";
+		regulator-min-microvolt = <850000>;
+		regulator-max-microvolt = <1350000>;
+		regulator-always-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	act8846: act8846@5a {
+		compatible = "active-semi,act8846";
+		reg = <0x5a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_vsel>, <&pwr_hold>;
+		system-power-controller;
+
+		vp1-supply = <&vcc_sys>;
+		vp2-supply = <&vcc_sys>;
+		vp3-supply = <&vcc_sys>;
+		vp4-supply = <&vcc_sys>;
+		inl1-supply = <&vcc_sys>;
+		inl2-supply = <&vcc_sys>;
+		inl3-supply = <&vcc_20>;
+
+		regulators {
+			vcc_ddr: REG1 {
+				regulator-name = "vcc_ddr";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			vcc_io: REG2 {
+				regulator-name = "vcc_io";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_log: REG3 {
+				regulator-name = "vdd_log";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+			};
+
+			vcc_20: REG4 {
+				regulator-name = "vcc_20";
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-always-on;
+			};
+
+			vccio_sd: REG5 {
+				regulator-name = "vccio_sd";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vdd10_lcd: REG6 {
+				regulator-name = "vdd10_lcd";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+			};
+
+			vcca_18: REG7  {
+				regulator-name = "vcca_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vcca_33: REG8 {
+				regulator-name = "vcca_33";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vcc_lan: REG9 {
+				regulator-name = "vcca_lan";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vdd_10: REG10 {
+				regulator-name = "vdd_10";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			vccio_wl: vcc_18: REG11 {
+				regulator-name = "vcc_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			vcc18_lcd: REG12 {
+				regulator-name = "vcc18_lcd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+		};
+	};
+};
+
+&io_domains {
+	status = "okay";
+
+	audio-supply = <&vccio_wl>;
+	bb-supply = <&vcc_io>;
+	dvp-supply = <&dovdd_1v8>;
+	flash0-supply = <&vcc_flash>;
+	flash1-supply = <&vcc_lan>;
+	gpio30-supply = <&vcc_io>;
+	gpio1830-supply = <&vcc_io>;
+	lcdc-supply = <&vcc_io>;
+	sdcard-supply = <&vccio_sd>;
+	wifi-supply = <&vccio_wl>;
+};
+
+&pinctrl {
+	pcfg_output_high: pcfg-output-high {
+		output-high;
+	};
+
+	pcfg_output_low: pcfg-output-low {
+		output-low;
+	};
+
+	pcfg_pull_up_drv_12ma: pcfg-pull-up-drv-12ma {
+		bias-pull-up;
+		drive-strength = <12>;
+	};
+
+	act8846 {
+		pwr_hold: pwr-hold {
+			rockchip,pins = <0 1 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+
+		pmic_vsel: pmic-vsel {
+			rockchip,pins = <7 14 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+	};
+
+	gmac {
+		phy_int: phy-int {
+			rockchip,pins = <0 9 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		phy_pmeb: phy-pmeb {
+			rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		phy_rst: phy-rst {
+			rockchip,pins = <4 8 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+	};
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <0>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/rk3288-firefly-reload.dts b/arch/arm/boot/dts/rk3288-firefly-reload.dts
new file mode 100644
index 0000000..751bee8
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-firefly-reload.dts
@@ -0,0 +1,403 @@
+/*
+ * Device tree file for Firefly Rockchip RK3288 Core board
+ * Copyright (c) 2016 Randy Li <ayaka@soulik.info>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "rk3288-firefly-reload-core.dtsi"
+
+/ {
+	model = "Firefly-RK3288-reload";
+	compatible = "firefly,firefly-rk3288-reload", "rockchip,rk3288";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power {
+			wakeup-source;
+			gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+			label = "GPIO Power";
+			linux,code = <KEY_POWER>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pwr_key>;
+		};
+	};
+
+	ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power {
+			gpios = <&gpio8 2 GPIO_ACTIVE_LOW>;
+			label = "firefly:blue:power";
+			pinctrl-names = "default";
+			pinctrl-0 = <&power_led>;
+			panic-indicator;
+		};
+
+		work {
+			gpios = <&gpio8 1 GPIO_ACTIVE_LOW>;
+			label = "firefly:blue:user";
+			linux,default-trigger = "rc-feedback";
+			pinctrl-names = "default";
+			pinctrl-0 = <&work_led>;
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&hym8563>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable>;
+		reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "SPDIF";
+		simple-audio-card,dai-link@1 {  /* S/PDIF - S/PDIF */
+			cpu { sound-dai = <&spdif>; };
+			codec { sound-dai = <&spdif_out>; };
+		};
+	};
+
+	spdif_out: spdif-out {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+	};
+
+	vcc_host_5v: usb-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&host_vbus_drv>;
+		regulator-name = "vcc_host_5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&vcc_5v>;
+	};
+
+	vcc_5v: vcc_sys: vsys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_sd: sdmmc-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc_pwr>;
+		regulator-name = "vcc_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_otg_5v: usb-otg-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&otg_vbus_drv>;
+		regulator-name = "vcc_otg_5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&vcc_5v>;
+	};
+
+	dovdd_1v8: dovdd-1v8-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dvp_pwr>;
+		regulator-name = "dovdd_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc28_dvp: vcc28-dvp-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dvp_pwr>;
+		regulator-name = "vcc28_dvp";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	af_28: af_28-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dvp_pwr>;
+		regulator-name = "af_28";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	dvdd_1v2: af_28-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cif_pwr>;
+		regulator-name = "dvdd_1v2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vbat_wl: wifi-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat_wl";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_io>;
+	};
+};
+
+&i2c0 {
+	hym8563: hym8563@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "xin32k";
+		interrupt-parent = <&gpio7>;
+		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&rtc_int>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	codec: es8328@10 {
+		compatible = "everest,es8328";
+		DVDD-supply = <&vcca_33>;
+		AVDD-supply = <&vcca_33>;
+		PVDD-supply = <&vcca_33>;
+		HPVDD-supply = <&vcca_33>;
+		clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>;
+		clock-names = "i2s_hclk", "i2s_clk";
+		reg = <0x10>;
+	};
+};
+
+&i2s {
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	disable-wp;
+	num-slots = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>;
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&sdio0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	disable-wp;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	num-slots = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_bus4>, <&sdio0_cmd>, <&sdio0_clk>, <&sdio0_int>;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-ddr50;
+	vmmc-supply = <&vbat_wl>;
+	vqmmc-supply = <&vccio_wl>;
+	status = "okay";
+};
+
+&spdif {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer>, <&uart0_cts>, <&uart0_rts>;
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&usb_host1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usbhub_rst>;
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+};
+
+&pinctrl {
+	ir {
+		ir_int: ir-int {
+			rockchip,pins = <7 0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	dvp {
+		dvp_pwr: dvp-pwr {
+			rockchip,pins = <0 11 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		cif_pwr: cif-pwr {
+			rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	hym8563 {
+		rtc_int: rtc-int {
+			rockchip,pins = <7 4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	keys {
+		pwr_key: pwr-key {
+			rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	leds {
+		power_led: power-led {
+			rockchip,pins = <8 2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		work_led: work-led {
+			rockchip,pins = <8 1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdmmc {
+		/*
+		 * Default drive strength isn't enough to achieve even
+		 * high-speed mode on firefly board so bump up to 12ma.
+		 */
+		sdmmc_bus4: sdmmc-bus4 {
+			rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_12ma>,
+					<6 17 RK_FUNC_1 &pcfg_pull_up_drv_12ma>,
+					<6 18 RK_FUNC_1 &pcfg_pull_up_drv_12ma>,
+					<6 19 RK_FUNC_1 &pcfg_pull_up_drv_12ma>;
+		};
+
+		sdmmc_clk: sdmmc-clk {
+			rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none_12ma>;
+		};
+
+		sdmmc_cmd: sdmmc-cmd {
+			rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_12ma>;
+		};
+
+		sdmmc_pwr: sdmmc-pwr {
+			rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdio {
+		wifi_enable: wifi-enable {
+			rockchip,pins = <4 28 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb_host {
+		host_vbus_drv: host-vbus-drv {
+			rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		usbhub_rst: usbhub-rst {
+			rockchip,pins = <8 3 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+	};
+
+	usb_otg {
+		otg_vbus_drv: otg-vbus-drv {
+			rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/rk3288-popmetal.dts b/arch/arm/boot/dts/rk3288-popmetal.dts
index dda8d25..56dd377 100644
--- a/arch/arm/boot/dts/rk3288-popmetal.dts
+++ b/arch/arm/boot/dts/rk3288-popmetal.dts
@@ -387,12 +387,16 @@
 		interrupts = <1 IRQ_TYPE_EDGE_RISING>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&comp_int>;
+		vdd-supply = <&vcc_io>;
+		vid-supply = <&vcc_io>;
 	};
 
-	l3g4200d: l3g4200d@68 {
+	l3g4200d: l3g4200d@69 {
 		compatible = "st,l3g4200d-gyro";
 		st,drdy-int-pin = <2>;
-		reg = <0x6b>;
+		reg = <0x69>;
+		vdd-supply = <&vcc_io>;
+		vddio-supply = <&vcc_io>;
 	};
 
 	mma8452: mma8452@1d {
@@ -525,3 +529,7 @@
 &usbphy {
 	status = "okay";
 };
+
+&usb_otg {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index 91c4b3c..17ec2e2 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -45,6 +45,7 @@
 #include <dt-bindings/clock/rk3288-cru.h>
 #include <dt-bindings/thermal/thermal.h>
 #include <dt-bindings/power/rk3288-power.h>
+#include <dt-bindings/soc/rockchip,boot-mode.h>
 #include "skeleton.dtsi"
 
 / {
@@ -793,6 +794,15 @@
 				clocks = <&cru ACLK_GPU>;
 			};
 		};
+
+		reboot-mode {
+			compatible = "syscon-reboot-mode";
+			offset = <0x94>;
+			mode-normal = <BOOT_NORMAL>;
+			mode-recovery = <BOOT_RECOVERY>;
+			mode-bootloader = <BOOT_FASTBOOT>;
+			mode-loader = <BOOT_BL_DOWNLOAD>;
+		};
 	};
 
 	sgrf: syscon@ff740000 {
@@ -834,6 +844,37 @@
 			compatible = "rockchip,rk3288-io-voltage-domain";
 			status = "disabled";
 		};
+
+		usbphy: usbphy {
+			compatible = "rockchip,rk3288-usb-phy";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			usbphy0: usb-phy@320 {
+				#phy-cells = <0>;
+				reg = <0x320>;
+				clocks = <&cru SCLK_OTGPHY0>;
+				clock-names = "phyclk";
+				#clock-cells = <0>;
+			};
+
+			usbphy1: usb-phy@334 {
+				#phy-cells = <0>;
+				reg = <0x334>;
+				clocks = <&cru SCLK_OTGPHY1>;
+				clock-names = "phyclk";
+				#clock-cells = <0>;
+			};
+
+			usbphy2: usb-phy@348 {
+				#phy-cells = <0>;
+				reg = <0x348>;
+				clocks = <&cru SCLK_OTGPHY2>;
+				clock-names = "phyclk";
+				#clock-cells = <0>;
+			};
+		};
 	};
 
 	wdt: watchdog@ff800000 {
@@ -1087,38 +1128,6 @@
 		};
 	};
 
-	usbphy: phy {
-		compatible = "rockchip,rk3288-usb-phy";
-		rockchip,grf = <&grf>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-
-		usbphy0: usb-phy@320 {
-			#phy-cells = <0>;
-			reg = <0x320>;
-			clocks = <&cru SCLK_OTGPHY0>;
-			clock-names = "phyclk";
-			#clock-cells = <0>;
-		};
-
-		usbphy1: usb-phy@334 {
-			#phy-cells = <0>;
-			reg = <0x334>;
-			clocks = <&cru SCLK_OTGPHY1>;
-			clock-names = "phyclk";
-			#clock-cells = <0>;
-		};
-
-		usbphy2: usb-phy@348 {
-			#phy-cells = <0>;
-			reg = <0x348>;
-			clocks = <&cru SCLK_OTGPHY2>;
-			clock-names = "phyclk";
-			#clock-cells = <0>;
-		};
-	};
-
 	pinctrl: pinctrl {
 		compatible = "rockchip,rk3288-pinctrl";
 		rockchip,grf = <&grf>;
diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi
index e2cd683..e15beb3 100644
--- a/arch/arm/boot/dts/rk3xxx.dtsi
+++ b/arch/arm/boot/dts/rk3xxx.dtsi
@@ -43,6 +43,7 @@
 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/rockchip,boot-mode.h>
 #include "skeleton.dtsi"
 
 / {
@@ -246,8 +247,17 @@
 	};
 
 	pmu: pmu@20004000 {
-		compatible = "rockchip,rk3066-pmu", "syscon";
+		compatible = "rockchip,rk3066-pmu", "syscon", "simple-mfd";
 		reg = <0x20004000 0x100>;
+
+		reboot-mode {
+			compatible = "syscon-reboot-mode";
+			offset = <0x40>;
+			mode-normal = <BOOT_NORMAL>;
+			mode-recovery = <BOOT_RECOVERY>;
+			mode-bootloader = <BOOT_FASTBOOT>;
+			mode-loader = <BOOT_BL_DOWNLOAD>;
+		};
 	};
 
 	grf: grf@20008000 {
diff --git a/arch/arm/boot/dts/s3c2416-pinctrl.dtsi b/arch/arm/boot/dts/s3c2416-pinctrl.dtsi
index 527e319..6274359 100644
--- a/arch/arm/boot/dts/s3c2416-pinctrl.dtsi
+++ b/arch/arm/boot/dts/s3c2416-pinctrl.dtsi
@@ -8,6 +8,8 @@
  * published by the Free Software Foundation.
  */
 
+#include <dt-bindings/pinctrl/samsung.h>
+
 &pinctrl_0 {
 	/*
 	 * Pin banks
@@ -83,91 +85,91 @@
 
 	uart0_data: uart0-data {
 		samsung,pins = "gph-0", "gph-1";
-		samsung,pin-function = <2>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 	};
 
 	uart0_fctl: uart0-fctl {
 		samsung,pins = "gph-8", "gph-9";
-		samsung,pin-function = <2>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 	};
 
 	uart1_data: uart1-data {
 		samsung,pins = "gph-2", "gph-3";
-		samsung,pin-function = <2>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 	};
 
 	uart1_fctl: uart1-fctl {
 		samsung,pins = "gph-10", "gph-11";
-		samsung,pin-function = <2>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 	};
 
 	uart2_data: uart2-data {
 		samsung,pins = "gph-4", "gph-5";
-		samsung,pin-function = <2>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 	};
 
 	uart2_fctl: uart2-fctl {
 		samsung,pins = "gph-6", "gph-7";
-		samsung,pin-function = <2>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 	};
 
 	uart3_data: uart3-data {
 		samsung,pins = "gph-6", "gph-7";
-		samsung,pin-function = <2>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 	};
 
 	extuart_clk: extuart-clk {
 		samsung,pins = "gph-12";
-		samsung,pin-function = <2>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 	};
 
 	i2c0_bus: i2c0-bus {
 		samsung,pins = "gpe-14", "gpe-15";
-		samsung,pin-function = <2>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 	};
 
 	spi0_bus: spi0-bus {
 		samsung,pins = "gpe-11", "gpe-12", "gpe-13";
-		samsung,pin-function = <2>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 	};
 
 	sd0_clk: sd0-clk {
 		samsung,pins = "gpe-5";
-		samsung,pin-function = <2>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 	};
 
 	sd0_cmd: sd0-cmd {
 		samsung,pins = "gpe-6";
-		samsung,pin-function = <2>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 	};
 
 	sd0_bus1: sd0-bus1 {
 		samsung,pins = "gpe-7";
-		samsung,pin-function = <2>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 	};
 
 	sd0_bus4: sd0-bus4 {
 		samsung,pins = "gpe-8", "gpe-9", "gpe-10";
-		samsung,pin-function = <2>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 	};
 
 	sd1_cmd: sd1-cmd {
 		samsung,pins = "gpl-8";
-		samsung,pin-function = <2>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 	};
 
 	sd1_clk: sd1-clk {
 		samsung,pins = "gpl-9";
-		samsung,pin-function = <2>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 	};
 
 	sd1_bus1: sd1-bus1 {
 		samsung,pins = "gpl-0";
-		samsung,pin-function = <2>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 	};
 
 	sd1_bus4: sd1-bus4 {
 		samsung,pins = "gpl-1", "gpl-2", "gpl-3";
-		samsung,pin-function = <2>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 	};
 };
diff --git a/arch/arm/boot/dts/s3c6410-mini6410.dts b/arch/arm/boot/dts/s3c6410-mini6410.dts
index a25debb..f4afda3 100644
--- a/arch/arm/boot/dts/s3c6410-mini6410.dts
+++ b/arch/arm/boot/dts/s3c6410-mini6410.dts
@@ -201,13 +201,13 @@
 &pinctrl0 {
 	gpio_leds: gpio-leds {
 		samsung,pins = "gpk-4", "gpk-5", "gpk-6", "gpk-7";
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	gpio_keys: gpio-keys {
 		samsung,pins = "gpn-0", "gpn-1", "gpn-2", "gpn-3",
 				"gpn-4", "gpn-5", "gpl-11", "gpl-12";
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi b/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi
index b1197d8..4e8e802 100644
--- a/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi
+++ b/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi
@@ -12,9 +12,7 @@
  * published by the Free Software Foundation.
  */
 
-#define PIN_PULL_NONE	0
-#define PIN_PULL_DOWN	1
-#define PIN_PULL_UP	2
+#include <dt-bindings/pinctrl/samsung.h>
 
 &pinctrl0 {
 	/*
@@ -138,514 +136,514 @@
 
 	uart0_data: uart0-data {
 		samsung,pins = "gpa-0", "gpa-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	uart0_fctl: uart0-fctl {
 		samsung,pins = "gpa-2", "gpa-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	uart1_data: uart1-data {
 		samsung,pins = "gpa-4", "gpa-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	uart1_fctl: uart1-fctl {
 		samsung,pins = "gpa-6", "gpa-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	uart2_data: uart2-data {
 		samsung,pins = "gpb-0", "gpb-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	uart3_data: uart3-data {
 		samsung,pins = "gpb-2", "gpb-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	ext_dma_0: ext-dma-0 {
 		samsung,pins = "gpb-0", "gpb-1";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	ext_dma_1: ext-dma-1 {
 		samsung,pins = "gpb-2", "gpb-3";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	irda_data_0: irda-data-0 {
 		samsung,pins = "gpb-0", "gpb-1";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	irda_data_1: irda-data-1 {
 		samsung,pins = "gpb-2", "gpb-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	irda_sdbw: irda-sdbw {
 		samsung,pins = "gpb-4";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	i2c0_bus: i2c0-bus {
 		samsung,pins = "gpb-5", "gpb-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
 	};
 
 	i2c1_bus: i2c1-bus {
 		/* S3C6410-only */
 		samsung,pins = "gpb-2", "gpb-3";
-		samsung,pin-function = <6>;
-		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_6>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
 	};
 
 	spi0_bus: spi0-bus {
 		samsung,pins = "gpc-0", "gpc-1", "gpc-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
 	};
 
 	spi0_cs: spi0-cs {
 		samsung,pins = "gpc-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	spi1_bus: spi1-bus {
 		samsung,pins = "gpc-4", "gpc-5", "gpc-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
 	};
 
 	spi1_cs: spi1-cs {
 		samsung,pins = "gpc-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	sd0_cmd: sd0-cmd {
 		samsung,pins = "gpg-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	sd0_clk: sd0-clk {
 		samsung,pins = "gpg-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	sd0_bus1: sd0-bus1 {
 		samsung,pins = "gpg-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	sd0_bus4: sd0-bus4 {
 		samsung,pins = "gpg-2", "gpg-3", "gpg-4", "gpg-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	sd0_cd: sd0-cd {
 		samsung,pins = "gpg-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
 	};
 
 	sd1_cmd: sd1-cmd {
 		samsung,pins = "gph-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	sd1_clk: sd1-clk {
 		samsung,pins = "gph-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	sd1_bus1: sd1-bus1 {
 		samsung,pins = "gph-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	sd1_bus4: sd1-bus4 {
 		samsung,pins = "gph-2", "gph-3", "gph-4", "gph-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	sd1_bus8: sd1-bus8 {
 		samsung,pins = "gph-2", "gph-3", "gph-4", "gph-5",
 				"gph-6", "gph-7", "gph-8", "gph-9";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	sd1_cd: sd1-cd {
 		samsung,pins = "gpg-6";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
 	};
 
 	sd2_cmd: sd2-cmd {
 		samsung,pins = "gpc-4";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	sd2_clk: sd2-clk {
 		samsung,pins = "gpc-5";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	sd2_bus1: sd2-bus1 {
 		samsung,pins = "gph-6";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	sd2_bus4: sd2-bus4 {
 		samsung,pins = "gph-6", "gph-7", "gph-8", "gph-9";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	i2s0_bus: i2s0-bus {
 		samsung,pins = "gpd-0", "gpd-2", "gpd-3", "gpd-4";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	i2s0_cdclk: i2s0-cdclk {
 		samsung,pins = "gpd-1";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	i2s1_bus: i2s1-bus {
 		samsung,pins = "gpe-0", "gpe-2", "gpe-3", "gpe-4";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	i2s1_cdclk: i2s1-cdclk {
 		samsung,pins = "gpe-1";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	i2s2_bus: i2s2-bus {
 		/* S3C6410-only */
 		samsung,pins = "gpc-4", "gpc-5", "gpc-6", "gph-6",
 				"gph-8", "gph-9";
-		samsung,pin-function = <5>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	i2s2_cdclk: i2s2-cdclk {
 		/* S3C6410-only */
 		samsung,pins = "gph-7";
-		samsung,pin-function = <5>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	pcm0_bus: pcm0-bus {
 		samsung,pins = "gpd-0", "gpd-2", "gpd-3", "gpd-4";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	pcm0_extclk: pcm0-extclk {
 		samsung,pins = "gpd-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	pcm1_bus: pcm1-bus {
 		samsung,pins = "gpe-0", "gpe-2", "gpe-3", "gpe-4";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	pcm1_extclk: pcm1-extclk {
 		samsung,pins = "gpe-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	ac97_bus_0: ac97-bus-0 {
 		samsung,pins = "gpd-0", "gpd-1", "gpd-2", "gpd-3", "gpd-4";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	ac97_bus_1: ac97-bus-1 {
 		samsung,pins = "gpe-0", "gpe-1", "gpe-2", "gpe-3", "gpe-4";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	cam_port: cam-port {
 		samsung,pins = "gpf-0", "gpf-1", "gpf-2", "gpf-4",
 				"gpf-5", "gpf-6", "gpf-7", "gpf-8",
 				"gpf-9", "gpf-10", "gpf-11", "gpf-12";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	cam_rst: cam-rst {
 		samsung,pins = "gpf-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	cam_field: cam-field {
 		/* S3C6410-only */
 		samsung,pins = "gpb-4";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	pwm_extclk: pwm-extclk {
 		samsung,pins = "gpf-13";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	pwm0_out: pwm0-out {
 		samsung,pins = "gpf-14";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	pwm1_out: pwm1-out {
 		samsung,pins = "gpf-15";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	clkout0: clkout-0 {
 		samsung,pins = "gpf-14";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_col0_0: keypad-col0-0 {
 		samsung,pins = "gph-0";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_col1_0: keypad-col1-0 {
 		samsung,pins = "gph-1";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_col2_0: keypad-col2-0 {
 		samsung,pins = "gph-2";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_col3_0: keypad-col3-0 {
 		samsung,pins = "gph-3";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_col4_0: keypad-col4-0 {
 		samsung,pins = "gph-4";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_col5_0: keypad-col5-0 {
 		samsung,pins = "gph-5";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_col6_0: keypad-col6-0 {
 		samsung,pins = "gph-6";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_col7_0: keypad-col7-0 {
 		samsung,pins = "gph-7";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_col0_1: keypad-col0-1 {
 		samsung,pins = "gpl-0";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_col1_1: keypad-col1-1 {
 		samsung,pins = "gpl-1";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_col2_1: keypad-col2-1 {
 		samsung,pins = "gpl-2";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_col3_1: keypad-col3-1 {
 		samsung,pins = "gpl-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_col4_1: keypad-col4-1 {
 		samsung,pins = "gpl-4";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_col5_1: keypad-col5-1 {
 		samsung,pins = "gpl-5";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_col6_1: keypad-col6-1 {
 		samsung,pins = "gpl-6";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_col7_1: keypad-col7-1 {
 		samsung,pins = "gpl-7";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_row0_0: keypad-row0-0 {
 		samsung,pins = "gpk-8";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_row1_0: keypad-row1-0 {
 		samsung,pins = "gpk-9";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_row2_0: keypad-row2-0 {
 		samsung,pins = "gpk-10";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_row3_0: keypad-row3-0 {
 		samsung,pins = "gpk-11";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_row4_0: keypad-row4-0 {
 		samsung,pins = "gpk-12";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_row5_0: keypad-row5-0 {
 		samsung,pins = "gpk-13";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_row6_0: keypad-row6-0 {
 		samsung,pins = "gpk-14";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_row7_0: keypad-row7-0 {
 		samsung,pins = "gpk-15";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_row0_1: keypad-row0-1 {
 		samsung,pins = "gpn-0";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_row1_1: keypad-row1-1 {
 		samsung,pins = "gpn-1";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_row2_1: keypad-row2-1 {
 		samsung,pins = "gpn-2";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_row3_1: keypad-row3-1 {
 		samsung,pins = "gpn-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_row4_1: keypad-row4-1 {
 		samsung,pins = "gpn-4";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_row5_1: keypad-row5-1 {
 		samsung,pins = "gpn-5";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_row6_1: keypad-row6-1 {
 		samsung,pins = "gpn-6";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_row7_1: keypad-row7-1 {
 		samsung,pins = "gpn-7";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	lcd_ctrl: lcd-ctrl {
 		samsung,pins = "gpj-8", "gpj-9", "gpj-10", "gpj-11";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	lcd_data16: lcd-data-width16 {
@@ -653,8 +651,8 @@
 				"gpi-7", "gpi-10", "gpi-11", "gpi-12",
 				"gpi-13", "gpi-14", "gpi-15", "gpj-3",
 				"gpj-4", "gpj-5", "gpj-6", "gpj-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	lcd_data18: lcd-data-width18 {
@@ -663,8 +661,8 @@
 				"gpi-12", "gpi-13", "gpi-14", "gpi-15",
 				"gpj-2", "gpj-3", "gpj-4", "gpj-5",
 				"gpj-6", "gpj-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	lcd_data24: lcd-data-width24 {
@@ -674,14 +672,14 @@
 				"gpi-12", "gpi-13", "gpi-14", "gpi-15",
 				"gpj-0", "gpj-1", "gpj-2", "gpj-3",
 				"gpj-4", "gpj-5", "gpj-6", "gpj-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	hsi_bus: hsi-bus {
 		samsung,pins = "gpk-0", "gpk-1", "gpk-2", "gpk-3",
 				"gpk-4", "gpk-5", "gpk-6", "gpk-7";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 };
diff --git a/arch/arm/boot/dts/s5pv210-aquila.dts b/arch/arm/boot/dts/s5pv210-aquila.dts
index da24ab5..4013992 100644
--- a/arch/arm/boot/dts/s5pv210-aquila.dts
+++ b/arch/arm/boot/dts/s5pv210-aquila.dts
@@ -29,7 +29,7 @@
 		bootargs = "console=ttySAC2,115200n8 root=/dev/mmcblk1p5 rw rootwait ignore_loglevel earlyprintk";
 	};
 
-	memory {
+	memory@30000000 {
 		device_type = "memory";
 		reg = <0x30000000 0x05000000
 			0x40000000 0x18000000>;
@@ -387,7 +387,7 @@
 &pinctrl0 {
 	t_flash_detect: t-flash-detect {
 		samsung,pins = "gph3-4";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 };
diff --git a/arch/arm/boot/dts/s5pv210-goni.dts b/arch/arm/boot/dts/s5pv210-goni.dts
index 0a33d40..c56f51e 100644
--- a/arch/arm/boot/dts/s5pv210-goni.dts
+++ b/arch/arm/boot/dts/s5pv210-goni.dts
@@ -29,7 +29,7 @@
 		bootargs = "console=ttySAC0,115200n8 root=/dev/mmcblk0p5 rw rootwait ignore_loglevel earlyprintk";
 	};
 
-	memory {
+	memory@30000000 {
 		device_type = "memory";
 		reg = <0x30000000 0x05000000
 			0x40000000 0x10000000
diff --git a/arch/arm/boot/dts/s5pv210-pinctrl.dtsi b/arch/arm/boot/dts/s5pv210-pinctrl.dtsi
index 8c71408..9a3e851 100644
--- a/arch/arm/boot/dts/s5pv210-pinctrl.dtsi
+++ b/arch/arm/boot/dts/s5pv210-pinctrl.dtsi
@@ -19,6 +19,8 @@
  * published by the Free Software Foundation.
  */
 
+#include <dt-bindings/pinctrl/samsung.h>
+
 &pinctrl0 {
 	gpa0: gpa0 {
 		gpio-controller;
@@ -270,559 +272,559 @@
 
 	uart0_data: uart0-data {
 		samsung,pins = "gpa0-0", "gpa0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	uart0_fctl: uart0-fctl {
 		samsung,pins = "gpa0-2", "gpa0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	uart1_data: uart1-data {
 		samsung,pins = "gpa0-4", "gpa0-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	uart1_fctl: uart1-fctl {
 		samsung,pins = "gpa0-6", "gpa0-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	uart2_data: uart2-data {
 		samsung,pins = "gpa1-0", "gpa1-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	uart2_fctl: uart2-fctl {
 		samsung,pins = "gpa1-2", "gpa1-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	uart3_data: uart3-data {
 		samsung,pins = "gpa1-2", "gpa1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	uart_audio: uart-audio {
 		samsung,pins = "gpa1-2", "gpa1-3";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	spi0_bus: spi0-bus {
 		samsung,pins = "gpb-0", "gpb-2", "gpb-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	spi1_bus: spi1-bus {
 		samsung,pins = "gpb-4", "gpb-6", "gpb-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2s0_bus: i2s0-bus {
 		samsung,pins = "gpi-0", "gpi-1", "gpi-2", "gpi-3",
 				"gpi-4", "gpi-5", "gpi-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2s1_bus: i2s1-bus {
 		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
 				"gpc0-4";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2s2_bus: i2s2-bus {
 		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
 				"gpc1-4";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	pcm1_bus: pcm1-bus {
 		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
 				"gpc0-4";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	ac97_bus: ac97-bus {
 		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
 				"gpc0-4";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2s2_bus: i2s2-bus {
 		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
 				"gpc1-4";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	pcm2_bus: pcm2-bus {
 		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
 				"gpc1-4";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	spdif_bus: spdif-bus {
 		samsung,pins = "gpc1-0", "gpc1-1";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	spi2_bus: spi2-bus {
 		samsung,pins = "gpc1-1", "gpc1-2", "gpc1-3", "gpc1-4";
-		samsung,pin-function = <5>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c0_bus: i2c0-bus {
 		samsung,pins = "gpd1-0", "gpd1-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c1_bus: i2c1-bus {
 		samsung,pins = "gpd1-2", "gpd1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c2_bus: i2c2-bus {
 		samsung,pins = "gpd1-4", "gpd1-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	pwm0_out: pwm0-out {
 		samsung,pins = "gpd0-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	pwm1_out: pwm1-out {
 		samsung,pins = "gpd0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	pwm2_out: pwm2-out {
 		samsung,pins = "gpd0-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	pwm3_out: pwm3-out {
 		samsung,pins = "gpd0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	keypad_row0: keypad-row-0 {
 		samsung,pins = "gph3-0";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	keypad_row1: keypad-row-1 {
 		samsung,pins = "gph3-1";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	keypad_row2: keypad-row-2 {
 		samsung,pins = "gph3-2";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	keypad_row3: keypad-row-3 {
 		samsung,pins = "gph3-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	keypad_row4: keypad-row-4 {
 		samsung,pins = "gph3-4";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	keypad_row5: keypad-row-5 {
 		samsung,pins = "gph3-5";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	keypad_row6: keypad-row-6 {
 		samsung,pins = "gph3-6";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	keypad_row7: keypad-row-7 {
 		samsung,pins = "gph3-7";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	keypad_col0: keypad-col-0 {
 		samsung,pins = "gph2-0";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	keypad_col1: keypad-col-1 {
 		samsung,pins = "gph2-1";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	keypad_col2: keypad-col-2 {
 		samsung,pins = "gph2-2";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	keypad_col3: keypad-col-3 {
 		samsung,pins = "gph2-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	keypad_col4: keypad-col-4 {
 		samsung,pins = "gph2-4";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	keypad_col5: keypad-col-5 {
 		samsung,pins = "gph2-5";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	keypad_col6: keypad-col-6 {
 		samsung,pins = "gph2-6";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	keypad_col7: keypad-col-7 {
 		samsung,pins = "gph2-7";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	sd0_clk: sd0-clk {
 		samsung,pins = "gpg0-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd0_cmd: sd0-cmd {
 		samsung,pins = "gpg0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd0_cd: sd0-cd {
 		samsung,pins = "gpg0-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd0_bus1: sd0-bus-width1 {
 		samsung,pins = "gpg0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd0_bus4: sd0-bus-width4 {
 		samsung,pins = "gpg0-3", "gpg0-4", "gpg0-5", "gpg0-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd0_bus8: sd0-bus-width8 {
 		samsung,pins = "gpg1-3", "gpg1-4", "gpg1-5", "gpg1-6";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd1_clk: sd1-clk {
 		samsung,pins = "gpg1-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd1_cmd: sd1-cmd {
 		samsung,pins = "gpg1-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd1_cd: sd1-cd {
 		samsung,pins = "gpg1-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd1_bus1: sd1-bus-width1 {
 		samsung,pins = "gpg1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd1_bus4: sd1-bus-width4 {
 		samsung,pins = "gpg1-3", "gpg1-4", "gpg1-5", "gpg1-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd2_clk: sd2-clk {
 		samsung,pins = "gpg2-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd2_cmd: sd2-cmd {
 		samsung,pins = "gpg2-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd2_cd: sd2-cd {
 		samsung,pins = "gpg2-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd2_bus1: sd2-bus-width1 {
 		samsung,pins = "gpg2-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd2_bus4: sd2-bus-width4 {
 		samsung,pins = "gpg2-3", "gpg2-4", "gpg2-5", "gpg2-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd2_bus8: sd2-bus-width8 {
 		samsung,pins = "gpg3-3", "gpg3-4", "gpg3-5", "gpg3-6";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd3_clk: sd3-clk {
 		samsung,pins = "gpg3-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd3_cmd: sd3-cmd {
 		samsung,pins = "gpg3-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd3_cd: sd3-cd {
 		samsung,pins = "gpg3-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd3_bus1: sd3-bus-width1 {
 		samsung,pins = "gpg3-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd3_bus4: sd3-bus-width4 {
 		samsung,pins = "gpg3-3", "gpg3-4", "gpg3-5", "gpg3-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	eint0: ext-int0 {
 		samsung,pins = "gph0-0";
-		samsung,pin-function = <0xf>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	eint8: ext-int8 {
 		samsung,pins = "gph1-0";
-		samsung,pin-function = <0xf>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	eint15: ext-int15 {
 		samsung,pins = "gph1-7";
-		samsung,pin-function = <0xf>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	eint16: ext-int16 {
 		samsung,pins = "gph2-0";
-		samsung,pin-function = <0xf>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	eint31: ext-int31 {
 		samsung,pins = "gph3-7";
-		samsung,pin-function = <0xf>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	cam_port_a_io: cam-port-a-io {
 		samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
 				"gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
 				"gpe1-0", "gpe1-1", "gpe1-2", "gpe1-4";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	cam_port_a_clk_active: cam-port-a-clk-active {
 		samsung,pins = "gpe1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	cam_port_a_clk_idle: cam-port-a-clk-idle {
 		samsung,pins = "gpe1-3";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <1>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	cam_port_b_io: cam-port-b-io {
 		samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3",
 				"gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7",
 				"gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	cam_port_b_clk_active: cam-port-b-clk-active {
 		samsung,pins = "gpj1-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	cam_port_b_clk_idle: cam-port-b-clk-idle {
 		samsung,pins = "gpj1-3";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <1>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 		lcd_ctrl: lcd-ctrl {
 		samsung,pins = "gpd0-0", "gpd0-1";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	lcd_sync: lcd-sync {
 		samsung,pins = "gpf0-0", "gpf0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	lcd_clk: lcd-clk {
 		samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	lcd_data24: lcd-data-width24 {
@@ -832,8 +834,8 @@
 				"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
 				"gpf2-4", "gpf2-5", "gpf2-6", "gpf2-7",
 				"gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
diff --git a/arch/arm/boot/dts/s5pv210-smdkc110.dts b/arch/arm/boot/dts/s5pv210-smdkc110.dts
index 1eedab7..5d14da9 100644
--- a/arch/arm/boot/dts/s5pv210-smdkc110.dts
+++ b/arch/arm/boot/dts/s5pv210-smdkc110.dts
@@ -29,7 +29,7 @@
 		bootargs = "console=ttySAC0,115200n8 root=/dev/mmcblk0p1 rw rootwait ignore_loglevel earlyprintk";
 	};
 
-	memory {
+	memory@20000000 {
 		device_type = "memory";
 		reg = <0x20000000 0x20000000>;
 	};
diff --git a/arch/arm/boot/dts/s5pv210-smdkv210.dts b/arch/arm/boot/dts/s5pv210-smdkv210.dts
index 9eb6aff..7539831 100644
--- a/arch/arm/boot/dts/s5pv210-smdkv210.dts
+++ b/arch/arm/boot/dts/s5pv210-smdkv210.dts
@@ -29,7 +29,7 @@
 		bootargs = "console=ttySAC0,115200n8 root=/dev/mmcblk0p1 rw rootwait ignore_loglevel earlyprintk";
 	};
 
-	memory {
+	memory@20000000 {
 		device_type = "memory";
 		reg = <0x20000000 0x40000000>;
 	};
diff --git a/arch/arm/boot/dts/s5pv210-torbreck.dts b/arch/arm/boot/dts/s5pv210-torbreck.dts
index 622599f..7cb50bc 100644
--- a/arch/arm/boot/dts/s5pv210-torbreck.dts
+++ b/arch/arm/boot/dts/s5pv210-torbreck.dts
@@ -29,7 +29,7 @@
 		bootargs = "console=ttySAC0,115200n8 root=/dev/mmcblk0p1 rw rootwait ignore_loglevel earlyprintk";
 	};
 
-	memory {
+	memory@20000000 {
 		device_type = "memory";
 		reg = <0x20000000 0x20000000>;
 	};
diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi
index ffc36bd..a853918 100644
--- a/arch/arm/boot/dts/s5pv210.dtsi
+++ b/arch/arm/boot/dts/s5pv210.dtsi
@@ -19,11 +19,13 @@
  * published by the Free Software Foundation.
 */
 
-#include "skeleton.dtsi"
 #include <dt-bindings/clock/s5pv210.h>
 #include <dt-bindings/clock/s5pv210-audss.h>
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
 	aliases {
 		csis0 = &csis0;
 		fimc0 = &fimc0;
diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index 353d0e5..7173ec9 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -77,6 +77,35 @@
 		interrupts = <2 IRQ_TYPE_LEVEL_HIGH 0>;
 	};
 
+	etb {
+		compatible = "arm,coresight-etb10", "arm,primecell";
+		reg = <0x740000 0x1000>;
+
+		clocks = <&mck>;
+		clock-names = "apb_pclk";
+
+		port {
+			etb_in: endpoint {
+				slave-mode;
+				remote-endpoint = <&etm_out>;
+			};
+		};
+	};
+
+	etm {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0x73C000 0x1000>;
+
+		clocks = <&mck>;
+		clock-names = "apb_pclk";
+
+		port {
+			etm_out: endpoint {
+				remote-endpoint = <&etb_in>;
+			};
+		};
+	};
+
 	memory {
 		reg = <0x20000000 0x20000000>;
 	};
diff --git a/arch/arm/boot/dts/skeleton.dtsi b/arch/arm/boot/dts/skeleton.dtsi
index b41d241..28b81d6 100644
--- a/arch/arm/boot/dts/skeleton.dtsi
+++ b/arch/arm/boot/dts/skeleton.dtsi
@@ -1,4 +1,8 @@
 /*
+ * This file is deprecated, and will be removed once existing users have been
+ * updated. New dts{,i} files should *not* include skeleton.dtsi, and should
+ * instead explicitly provide the below nodes only as required.
+ *
  * Skeleton device tree; the bare minimum needed to boot; just include and
  * add a compatible value.  The bootloader will typically populate the memory
  * node.
diff --git a/arch/arm/boot/dts/ste-nomadik-nhk15.dts b/arch/arm/boot/dts/ste-nomadik-nhk15.dts
index d35aa88..1ec46a7 100644
--- a/arch/arm/boot/dts/ste-nomadik-nhk15.dts
+++ b/arch/arm/boot/dts/ste-nomadik-nhk15.dts
@@ -140,6 +140,10 @@
 						0x03020067 // Up
 						0x0303006c>; // Down
 			};
+			stmpe0_pwm: stmpe_pwm {
+				compatible = "st,stmpe-pwm";
+				#pwm-cells = <2>;
+			};
 		};
 		stmpe1: stmpe2401@44 {
 			compatible = "st,stmpe2401";
@@ -172,6 +176,50 @@
 	};
 
 	amba {
+		clcd@10120000 {
+			status = "okay";
+			pinctrl-names = "default";
+			pinctrl-0 = <&clcd_24bit_mux>;
+			port {
+				nomadik_clcd_pads: endpoint {
+					remote-endpoint = <&nomadik_clcd_panel>;
+					arm,pl11x,tft-r0g0b0-pads = <16 8 0>;
+				};
+			};
+
+			/*
+			 * WVGA connector 21
+			 * WVGA (800x480): 4.3" TPG110 TDO43MTEA2 24-bit RGB
+			 * with TPO touch screen.
+			 */
+			panel {
+				compatible = "tpo,tpg110", "panel-dpi";
+				grestb-gpios = <&stmpe_gpio44 5 GPIO_ACTIVE_LOW>;
+				scen-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+				scl-gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+				sda-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+				backlight = <&bl>;
+
+				port {
+					nomadik_clcd_panel: endpoint {
+						remote-endpoint = <&nomadik_clcd_pads>;
+					};
+				};
+
+				panel-timing {
+					clock-frequency = <33200000>;
+					hactive = <800>;
+					hback-porch = <216>;
+					hfront-porch = <40>;
+					hsync-len = <1>;
+					vactive = <480>;
+					vback-porch = <35>;
+					vfront-porch = <10>;
+					vsync-len = <1>;
+				};
+			};
+		};
+
 		/* Activate RX/TX and CTS/RTS on UART 0 */
 		uart0: uart@101fd000 {
 			pinctrl-names = "default";
@@ -183,4 +231,24 @@
 			wp-gpios = <&stmpe_gpio44 18 GPIO_ACTIVE_HIGH>;
 		};
 	};
+
+	bl: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&stmpe0_pwm 0 500000>;
+		pwm-names = "backlight";
+		brightness-levels = <
+			0  1  2  3  4  5  6  7  8  9
+			10 11 12 13 14 15 16 17 18 19
+			20 21 22 23 24 25 26 27 28 29
+			30 31 32 33 34 35 36 37 38 39
+			40 41 42 43 44 45 46 47 48 49
+			50 51 52 53 54 55 56 57 58 59
+			60 61 62 63 64 65 66 67 68 69
+			70 71 72 73 74 75 76 77 78 79
+			80 81 82 83 84 85 86 87 88 89
+			90 91 92 93 94 95 96 97 98 99
+			100
+		>;
+		default-brightness-level = <100>;
+	};
 };
diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
index d2d532a..adb1c099 100644
--- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
+++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
@@ -166,6 +166,24 @@
 				};
 			};
 		};
+		clcd {
+			/*
+			 * This should be activated to use the additional
+			 * 8 lines for bits 16 thru 23 from the CLCD block.
+			 */
+			clcd_24bit_mux: clcd_mux {
+				clcd_24bit_mux {
+					function = "clcd";
+					groups = "clcd_16_23_b_1";
+				};
+			};
+		};
+	};
+
+	/* Power Management Unit */
+	pmu: pmu@101e9000 {
+		compatible = "stericsson,nomadik-pmu", "syscon";
+		reg = <0x101e0000 0x1000>;
 	};
 
 	src: src@101e0000 {
@@ -726,6 +744,16 @@
 		#size-cells = <1>;
 		ranges;
 
+		clcd@10120000 {
+			compatible = "arm,pl110", "arm,primecell";
+			reg = <0x10120000 0x1000>;
+			interrupt-names = "combined";
+			interrupts = <14>;
+			clocks = <&clcdclk>, <&hclkclcd>;
+			clock-names = "clcdclk", "apb_pclk";
+			status = "disabled";
+		};
+
 		vica: intc@10140000 {
 			compatible = "arm,versatile-vic";
 			interrupt-controller;
diff --git a/arch/arm/boot/dts/stih407-clock.dtsi b/arch/arm/boot/dts/stih407-clock.dtsi
index ad45f5e..13029c0 100644
--- a/arch/arm/boot/dts/stih407-clock.dtsi
+++ b/arch/arm/boot/dts/stih407-clock.dtsi
@@ -42,7 +42,7 @@
 
 			clockgen_a9_pll: clockgen-a9-pll {
 				#clock-cells = <1>;
-				compatible = "st,stih407-plls-c32-a9", "st,clkgen-plls-c32";
+				compatible = "st,stih407-clkgen-plla9";
 
 				clocks = <&clk_sysin>;
 
@@ -55,7 +55,7 @@
 		 */
 		clk_m_a9: clk-m-a9@92b0000 {
 			#clock-cells = <0>;
-			compatible = "st,stih407-clkgen-a9-mux", "st,clkgen-mux";
+			compatible = "st,stih407-clkgen-a9-mux";
 			reg = <0x92b0000 0x10000>;
 
 			clocks = <&clockgen_a9_pll 0>,
@@ -96,7 +96,7 @@
 
 			clk_s_a0_pll: clk-s-a0-pll {
 				#clock-cells = <1>;
-				compatible = "st,stih407-plls-c32-a0", "st,clkgen-plls-c32";
+				compatible = "st,clkgen-pll0";
 
 				clocks = <&clk_sysin>;
 
@@ -117,7 +117,7 @@
 
 		clk_s_c0_quadfs: clk-s-c0-quadfs@9103000 {
 			#clock-cells = <1>;
-			compatible = "st,stih407-quadfs660-C", "st,quadfs";
+			compatible = "st,quadfs-pll";
 			reg = <0x9103000 0x1000>;
 
 			clocks = <&clk_sysin>;
@@ -134,7 +134,7 @@
 
 			clk_s_c0_pll0: clk-s-c0-pll0 {
 				#clock-cells = <1>;
-				compatible = "st,plls-c32-cx_0", "st,clkgen-plls-c32";
+				compatible = "st,clkgen-pll0";
 
 				clocks = <&clk_sysin>;
 
@@ -143,7 +143,7 @@
 
 			clk_s_c0_pll1: clk-s-c0-pll1 {
 				#clock-cells = <1>;
-				compatible = "st,plls-c32-cx_1", "st,clkgen-plls-c32";
+				compatible = "st,clkgen-pll1";
 
 				clocks = <&clk_sysin>;
 
@@ -199,7 +199,7 @@
 
 		clk_s_d0_quadfs: clk-s-d0-quadfs@9104000 {
 			#clock-cells = <1>;
-			compatible = "st,stih407-quadfs660-D", "st,quadfs";
+			compatible = "st,quadfs";
 			reg = <0x9104000 0x1000>;
 
 			clocks = <&clk_sysin>;
@@ -216,7 +216,7 @@
 
 			clk_s_d0_flexgen: clk-s-d0-flexgen {
 				#clock-cells = <1>;
-				compatible = "st,flexgen";
+				compatible = "st,flexgen-audio", "st,flexgen";
 
 				clocks = <&clk_s_d0_quadfs 0>,
 					 <&clk_s_d0_quadfs 1>,
@@ -233,7 +233,7 @@
 
 		clk_s_d2_quadfs: clk-s-d2-quadfs@9106000 {
 			#clock-cells = <1>;
-			compatible = "st,stih407-quadfs660-D", "st,quadfs";
+			compatible = "st,quadfs";
 			reg = <0x9106000 0x1000>;
 
 			clocks = <&clk_sysin>;
@@ -256,7 +256,7 @@
 
 			clk_s_d2_flexgen: clk-s-d2-flexgen {
 				#clock-cells = <1>;
-				compatible = "st,flexgen";
+				compatible = "st,flexgen-video", "st,flexgen";
 
 				clocks = <&clk_s_d2_quadfs 0>,
 					 <&clk_s_d2_quadfs 1>,
@@ -287,7 +287,7 @@
 
 		clk_s_d3_quadfs: clk-s-d3-quadfs@9107000 {
 			#clock-cells = <1>;
-			compatible = "st,stih407-quadfs660-D", "st,quadfs";
+			compatible = "st,quadfs";
 			reg = <0x9107000 0x1000>;
 
 			clocks = <&clk_sysin>;
diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
index 8b063ab..5430747 100644
--- a/arch/arm/boot/dts/stih407-family.dtsi
+++ b/arch/arm/boot/dts/stih407-family.dtsi
@@ -554,7 +554,6 @@
 			clocks = <&clk_s_c0_flexgen CLK_MMC_0>,
 				 <&clk_s_c0_flexgen CLK_RX_ICN_HVA>;
 			bus-width = <8>;
-			non-removable;
 		};
 
 		mmc1: sdhci@09080000 {
@@ -610,6 +609,8 @@
 			clock-names = "ahci_clk";
 			clocks = <&clk_s_c0_flexgen CLK_ICN_REG>;
 
+			ports-implemented = <0x1>;
+
 			status = "disabled";
 		};
 
@@ -633,6 +634,8 @@
 			clock-names = "ahci_clk";
 			clocks = <&clk_s_c0_flexgen CLK_ICN_REG>;
 
+			ports-implemented = <0x1>;
+
 			status = "disabled";
 		};
 
@@ -669,6 +672,7 @@
 			compatible	= "st,sti-pwm";
 			#pwm-cells	= <2>;
 			reg		= <0x9810000 0x68>;
+			interrupts      = <GIC_SPI 128 IRQ_TYPE_NONE>;
 			pinctrl-names	= "default";
 			pinctrl-0	= <&pinctrl_pwm0_chan0_default>;
 			clock-names	= "pwm";
@@ -823,5 +827,172 @@
 			clock-frequency	= <600000000>;
 			st,syscfg	= <&syscfg_core 0x224>;
 		};
+
+		/* fdma audio */
+		fdma0: dma-controller@8e20000 {
+			compatible = "st,stih407-fdma-mpe31-11", "st,slim-rproc";
+			reg = <0x8e20000 0x8000>,
+			      <0x8e30000 0x3000>,
+			      <0x8e37000 0x1000>,
+			      <0x8e38000 0x8000>;
+			reg-names = "slimcore", "dmem", "peripherals", "imem";
+			clocks = <&clk_s_c0_flexgen CLK_FDMA>,
+				 <&clk_s_c0_flexgen CLK_EXT2F_A9>,
+				 <&clk_s_c0_flexgen CLK_EXT2F_A9>,
+				 <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_NONE>;
+			dma-channels = <16>;
+			#dma-cells = <3>;
+		};
+
+		/* fdma app */
+		fdma1: dma-controller@8e40000 {
+			compatible = "st,stih407-fdma-mpe31-12", "st,slim-rproc";
+			reg = <0x8e40000 0x8000>,
+			      <0x8e50000 0x3000>,
+			      <0x8e57000 0x1000>,
+			      <0x8e58000 0x8000>;
+			reg-names = "slimcore", "dmem", "peripherals", "imem";
+			clocks = <&clk_s_c0_flexgen CLK_FDMA>,
+				<&clk_s_c0_flexgen CLK_TX_ICN_DMU>,
+				<&clk_s_c0_flexgen CLK_TX_ICN_DMU>,
+				<&clk_s_c0_flexgen CLK_EXT2F_A9>;
+
+			interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>;
+			dma-channels = <16>;
+			#dma-cells = <3>;
+		};
+
+		/* fdma free running */
+		fdma2: dma-controller@8e60000 {
+			compatible = "st,stih407-fdma-mpe31-13", "st,slim-rproc";
+			reg = <0x8e60000 0x8000>,
+			      <0x8e70000 0x3000>,
+			      <0x8e77000 0x1000>,
+			      <0x8e78000 0x8000>;
+			reg-names = "slimcore", "dmem", "peripherals", "imem";
+			interrupts = <GIC_SPI 9 IRQ_TYPE_NONE>;
+			dma-channels = <16>;
+			#dma-cells = <3>;
+			clocks = <&clk_s_c0_flexgen CLK_FDMA>,
+				<&clk_s_c0_flexgen CLK_EXT2F_A9>,
+				<&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
+				<&clk_s_c0_flexgen CLK_EXT2F_A9>;
+		};
+
+		sti_sasg_codec: sti-sasg-codec {
+			compatible = "st,stih407-sas-codec";
+			#sound-dai-cells = <1>;
+			status = "disabled";
+			st,syscfg = <&syscfg_core>;
+		};
+
+		sti_uni_player0: sti-uni-player@8d80000 {
+			compatible = "st,sti-uni-player";
+			#sound-dai-cells = <0>;
+			st,syscfg = <&syscfg_core>;
+			clocks = <&clk_s_d0_flexgen CLK_PCM_0>;
+			assigned-clocks = <&clk_s_d0_quadfs 0>, <&clk_s_d0_flexgen CLK_PCM_0>;
+			assigned-clock-parents = <0>, <&clk_s_d0_quadfs 0>;
+			assigned-clock-rates = <50000000>;
+			reg = <0x8d80000 0x158>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_NONE>;
+			dmas = <&fdma0 2 0 1>;
+			dai-name = "Uni Player #0 (HDMI)";
+			dma-names = "tx";
+			st,uniperiph-id = <0>;
+			st,version = <5>;
+			st,mode = "HDMI";
+
+			status		= "disabled";
+		};
+
+		sti_uni_player1: sti-uni-player@8d81000 {
+			compatible = "st,sti-uni-player";
+			#sound-dai-cells = <0>;
+			st,syscfg = <&syscfg_core>;
+			clocks = <&clk_s_d0_flexgen CLK_PCM_1>;
+			assigned-clocks = <&clk_s_d0_quadfs 1>, <&clk_s_d0_flexgen CLK_PCM_1>;
+			assigned-clock-parents = <0>, <&clk_s_d0_quadfs 1>;
+			assigned-clock-rates = <50000000>;
+			reg = <0x8d81000 0x158>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>;
+			dmas = <&fdma0 3 0 1>;
+			dai-name = "Uni Player #1 (PIO)";
+			dma-names = "tx";
+			st,uniperiph-id = <1>;
+			st,version = <5>;
+			st,mode = "PCM";
+
+			status = "disabled";
+		};
+
+		sti_uni_player2: sti-uni-player@8d82000 {
+			compatible = "st,sti-uni-player";
+			#sound-dai-cells = <0>;
+			st,syscfg = <&syscfg_core>;
+			clocks = <&clk_s_d0_flexgen CLK_PCM_2>;
+			assigned-clocks = <&clk_s_d0_quadfs 2>, <&clk_s_d0_flexgen CLK_PCM_2>;
+			assigned-clock-parents = <0>, <&clk_s_d0_quadfs 2>;
+			assigned-clock-rates = <50000000>;
+			reg = <0x8d82000 0x158>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_NONE>;
+			dmas = <&fdma0 4 0 1>;
+			dai-name = "Uni Player #1 (DAC)";
+			dma-names = "tx";
+			st,uniperiph-id = <2>;
+			st,version = <5>;
+			st,mode = "PCM";
+
+			status = "disabled";
+		};
+
+		sti_uni_player3: sti-uni-player@8d85000 {
+			compatible = "st,sti-uni-player";
+			#sound-dai-cells = <0>;
+			st,syscfg = <&syscfg_core>;
+			clocks = <&clk_s_d0_flexgen CLK_SPDIFF>;
+			assigned-clocks = <&clk_s_d0_quadfs 3>, <&clk_s_d0_flexgen CLK_SPDIFF>;
+			assigned-clock-parents = <0>, <&clk_s_d0_quadfs 3>;
+			assigned-clock-rates = <50000000>;
+			reg = <0x8d85000 0x158>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_NONE>;
+			dmas = <&fdma0 7 0 1>;
+			dma-names = "tx";
+			dai-name = "Uni Player #1 (PIO)";
+			st,uniperiph-id = <3>;
+			st,version = <5>;
+			st,mode = "SPDIF";
+
+			status = "disabled";
+		};
+
+		sti_uni_reader0: sti-uni-reader@8d83000 {
+			compatible = "st,sti-uni-reader";
+			#sound-dai-cells = <0>;
+			st,syscfg = <&syscfg_core>;
+			reg = <0x8d83000 0x158>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_NONE>;
+			dmas = <&fdma0 5 0 1>;
+			dma-names = "rx";
+			dai-name = "Uni Reader #0 (PCM IN)";
+			st,version = <3>;
+
+			status = "disabled";
+		};
+
+		sti_uni_reader1: sti-uni-reader@8d84000 {
+			compatible = "st,sti-uni-reader";
+			#sound-dai-cells = <0>;
+			st,syscfg = <&syscfg_core>;
+			reg = <0x8d84000 0x158>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_NONE>;
+			dmas = <&fdma0 6 0 1>;
+			dma-names = "rx";
+			dai-name = "Uni Reader #1 (HDMI RX)";
+			st,version = <3>;
+
+			status = "disabled";
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/stih407-pinctrl.dtsi b/arch/arm/boot/dts/stih407-pinctrl.dtsi
index a538ae5..c325cc0 100644
--- a/arch/arm/boot/dts/stih407-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stih407-pinctrl.dtsi
@@ -58,7 +58,7 @@
 
 			pio0: gpio@09610000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x0 0x100>;
@@ -66,7 +66,7 @@
 			};
 			pio1: gpio@09611000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x1000 0x100>;
@@ -74,7 +74,7 @@
 			};
 			pio2: gpio@09612000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x2000 0x100>;
@@ -82,7 +82,7 @@
 			};
 			pio3: gpio@09613000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x3000 0x100>;
@@ -90,7 +90,7 @@
 			};
 			pio4: gpio@09614000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x4000 0x100>;
@@ -99,7 +99,7 @@
 
 			pio5: gpio@09615000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x5000 0x100>;
@@ -230,6 +230,13 @@
 					};
 				};
 
+				pinctrl_rgmii1_mdio_1: rgmii1-mdio-1 {
+					st,pins {
+						mdio = <&pio1 0 ALT1 OUT BYPASS 0>;
+						mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>;
+					};
+				};
+
 				pinctrl_mii1: mii1 {
 					st,pins {
 						txd0 = <&pio0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
@@ -289,10 +296,12 @@
 				pinctrl_pwm1_chan0_default: pwm1-0-default {
 					st,pins {
 						pwm-out = <&pio3 0 ALT1 OUT>;
+						pwm-capturein = <&pio3 2 ALT1 IN>;
 					};
 				};
 				pinctrl_pwm1_chan1_default: pwm1-1-default {
 					st,pins {
+						pwm-capturein = <&pio4 3 ALT1 IN>;
 						pwm-out = <&pio4 4 ALT1 OUT>;
 					};
 				};
@@ -373,7 +382,7 @@
 
 			pio10: pio@09200000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x0 0x100>;
@@ -381,7 +390,7 @@
 			};
 			pio11: pio@09201000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x1000 0x100>;
@@ -389,7 +398,7 @@
 			};
 			pio12: pio@09202000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x2000 0x100>;
@@ -397,7 +406,7 @@
 			};
 			pio13: pio@09203000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x3000 0x100>;
@@ -405,7 +414,7 @@
 			};
 			pio14: pio@09204000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x4000 0x100>;
@@ -413,7 +422,7 @@
 			};
 			pio15: pio@09205000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x5000 0x100>;
@@ -421,7 +430,7 @@
 			};
 			pio16: pio@09206000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x6000 0x100>;
@@ -429,7 +438,7 @@
 			};
 			pio17: pio@09207000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x7000 0x100>;
@@ -437,7 +446,7 @@
 			};
 			pio18: pio@09208000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x8000 0x100>;
@@ -445,7 +454,7 @@
 			};
 			pio19: pio@09209000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x9000 0x100>;
@@ -523,6 +532,13 @@
 						scl = <&pio15 5 ALT2 BIDIR>;
 					};
 				};
+
+				pinctrl_i2c2_alt2_1: i2c2-alt2-1 {
+					st,pins {
+						sda = <&pio12 6 ALT2 BIDIR>;
+						scl = <&pio12 5 ALT2 BIDIR>;
+					};
+				};
 			};
 
 			i2c3 {
@@ -916,6 +932,15 @@
 			interrupt-names = "irqmux";
 			ranges = <0 0x09210000 0x10000>;
 
+			pio20: pio@09210000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x0 0x100>;
+				st,bank-name = "PIO20";
+			};
+
 			tsin4 {
 				pinctrl_tsin4_serial_alt1: tsin4_serial_alt1 {
 					st,pins {
@@ -927,15 +952,6 @@
 					};
 				};
 			};
-
-			pio20: pio@09210000 {
-				gpio-controller;
-				#gpio-cells = <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x0 0x100>;
-				st,bank-name = "PIO20";
-			};
 		};
 
 		pin-controller-rear {
@@ -951,7 +967,7 @@
 
 			pio30: gpio@09220000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x0 0x100>;
@@ -959,7 +975,7 @@
 			};
 			pio31: gpio@09221000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x1000 0x100>;
@@ -967,7 +983,7 @@
 			};
 			pio32: gpio@09222000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x2000 0x100>;
@@ -975,7 +991,7 @@
 			};
 			pio33: gpio@09223000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x3000 0x100>;
@@ -983,7 +999,7 @@
 			};
 			pio34: gpio@09224000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x4000 0x100>;
@@ -991,7 +1007,7 @@
 			};
 			pio35: gpio@09225000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x5000 0x100>;
@@ -1030,6 +1046,7 @@
 			pwm0 {
 				pinctrl_pwm0_chan0_default: pwm0-0-default {
 					st,pins {
+						pwm-capturein = <&pio31 0 ALT1 IN>;
 						pwm-out = <&pio31 1 ALT1 OUT>;
 					};
 				};
@@ -1067,6 +1084,61 @@
 				};
 			};
 
+			i2s_out {
+				pinctrl_i2s_8ch_out: i2s_8ch_out{
+					st,pins {
+						mclk = <&pio33 5 ALT1 OUT>;
+						lrclk = <&pio33 7 ALT1 OUT>;
+						sclk = <&pio33 6 ALT1 OUT>;
+						data0 = <&pio33 4 ALT1 OUT>;
+						data1 = <&pio34 0 ALT1 OUT>;
+						data2 = <&pio34 1 ALT1 OUT>;
+						data3 = <&pio34 2 ALT1 OUT>;
+					};
+				};
+
+				pinctrl_i2s_2ch_out: i2s_2ch_out{
+					st,pins {
+						mclk = <&pio33 5 ALT1 OUT>;
+						lrclk = <&pio33 7 ALT1 OUT>;
+						sclk = <&pio33 6 ALT1 OUT>;
+						data0 = <&pio33 4 ALT1 OUT>;
+					};
+				};
+			};
+
+			i2s_in {
+				pinctrl_i2s_8ch_in: i2s_8ch_in{
+					st,pins {
+						mclk = <&pio32 5 ALT1 IN>;
+						lrclk = <&pio32 7 ALT1 IN>;
+						sclk = <&pio32 6 ALT1 IN>;
+						data0 = <&pio32 4 ALT1 IN>;
+						data1 = <&pio33 0 ALT1 IN>;
+						data2 = <&pio33 1 ALT1 IN>;
+						data3 = <&pio33 2 ALT1 IN>;
+						data4 = <&pio33 3 ALT1 IN>;
+					};
+				};
+
+				pinctrl_i2s_2ch_in: i2s_2ch_in{
+					st,pins {
+						mclk = <&pio32 5 ALT1 IN>;
+						lrclk = <&pio32 7 ALT1 IN>;
+						sclk = <&pio32 6 ALT1 IN>;
+						data0 = <&pio32 4 ALT1 IN>;
+					};
+				};
+			};
+
+			spdif_out {
+				pinctrl_spdif_out: spdif_out{
+					st,pins {
+						spdif_out = <&pio34 7 ALT1 OUT>;
+					};
+				};
+			};
+
 			serial3 {
 				pinctrl_serial3: serial3-0 {
 					st,pins {
@@ -1090,7 +1162,7 @@
 
 			pio40: gpio@09230000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0 0x100>;
@@ -1098,7 +1170,7 @@
 			};
 			pio41: gpio@09231000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x1000 0x100>;
@@ -1106,7 +1178,7 @@
 			};
 			pio42: gpio@09232000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x2000 0x100>;
diff --git a/arch/arm/boot/dts/stih407.dtsi b/arch/arm/boot/dts/stih407.dtsi
index d60f0d8..291ffac 100644
--- a/arch/arm/boot/dts/stih407.dtsi
+++ b/arch/arm/boot/dts/stih407.dtsi
@@ -16,7 +16,10 @@
 			#size-cells = <1>;
 
 			assigned-clocks	= <&clk_s_d2_quadfs 0>,
-					  <&clk_s_d2_quadfs 0>,
+					  <&clk_s_d2_quadfs 1>,
+					  <&clk_s_c0_pll1 0>,
+					  <&clk_s_c0_flexgen CLK_COMPO_DVP>,
+					  <&clk_s_c0_flexgen CLK_MAIN_DISP>,
 					  <&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>,
 					  <&clk_s_d2_flexgen CLK_PIX_AUX_DISP>,
 					  <&clk_s_d2_flexgen CLK_PIX_GDP1>,
@@ -26,14 +29,21 @@
 
 			assigned-clock-parents = <0>,
 						 <0>,
+						 <0>,
+						 <&clk_s_c0_pll1 0>,
+						 <&clk_s_c0_pll1 0>,
 						 <&clk_s_d2_quadfs 0>,
-						 <&clk_s_d2_quadfs 0>,
+						 <&clk_s_d2_quadfs 1>,
 						 <&clk_s_d2_quadfs 0>,
 						 <&clk_s_d2_quadfs 0>,
 						 <&clk_s_d2_quadfs 0>,
 						 <&clk_s_d2_quadfs 0>;
 
-			assigned-clock-rates = <297000000>, <297000000>;
+			assigned-clock-rates = <297000000>,
+					       <108000000>,
+					       <0>,
+					       <400000000>,
+					       <400000000>;
 
 			ranges;
 
diff --git a/arch/arm/boot/dts/stih410-b2260.dts b/arch/arm/boot/dts/stih410-b2260.dts
new file mode 100644
index 0000000..ef2ff2f
--- /dev/null
+++ b/arch/arm/boot/dts/stih410-b2260.dts
@@ -0,0 +1,194 @@
+/*
+ * Copyright (C) 2016 STMicroelectronics (R&D) Limited.
+ * Author: Patrice Chotard <patrice.chotard@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+#include "stih410.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "STiH410 B2260";
+	compatible = "st,stih410-b2260", "st,stih410";
+
+	chosen {
+		bootargs = "console=ttyAS1,115200 clk_ignore_unused";
+		linux,stdout-path = &uart1;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x40000000 0x40000000>;
+	};
+
+	aliases {
+		ttyAS1 = &uart1;
+		ethernet0 = &ethernet0;
+	};
+
+	soc {
+
+		leds {
+			compatible = "gpio-leds";
+			user_green_1 {
+				label = "User_green_1";
+				gpios = <&pio1 3 GPIO_ACTIVE_LOW>;
+				linux,default-trigger = "heartbeat";
+				default-state = "off";
+			};
+
+			user_green_2 {
+				label = "User_green_2";
+				gpios = <&pio4 1 GPIO_ACTIVE_LOW>;
+				default-state = "off";
+			};
+
+			user_green_3 {
+				label = "User_green_3";
+				gpios = <&pio2 1 GPIO_ACTIVE_LOW>;
+				default-state = "off";
+			};
+
+			user_green_4 {
+				label = "User_green_4";
+				gpios = <&pio2 5 GPIO_ACTIVE_LOW>;
+				default-state = "off";
+			};
+		};
+
+		/* Low speed expansion connector */
+		uart0: serial@9830000 {
+			label = "LS-UART0";
+			status = "okay";
+		};
+
+		/* Low speed expansion connector */
+		uart1: serial@9831000 {
+			label = "LS-UART1";
+			status = "okay";
+		};
+
+		/* Low speed expansion connector */
+		spi0: spi@9844000 {
+			label = "LS-SPI0";
+			cs-gpio = <&pio30 3 0>;
+			status = "okay";
+		};
+
+		/* Low speed expansion connector */
+		i2c0: i2c@9840000 {
+			label = "LS-I2C0";
+			status = "okay";
+		};
+
+		/* Low speed expansion connector */
+		i2c1: i2c@9841000 {
+			label = "LS-I2C1";
+			status = "okay";
+		};
+
+		/* high speed expansion connector */
+		i2c2: i2c@9842000 {
+			label = "HS-I2C2";
+			pinctrl-0 = <&pinctrl_i2c2_alt2_1>;
+			status = "okay";
+		};
+
+		/* high speed expansion connector */
+		i2c3: i2c@9843000 {
+			label = "HS-I2C3";
+			pinctrl-0 = <&pinctrl_i2c3_alt3_0>;
+			status = "okay";
+		};
+
+		mmc0: sdhci@09060000 {
+			pinctrl-0 = <&pinctrl_sd0>;
+			bus-width = <4>;
+			status = "okay";
+		};
+
+		/* high speed expansion connector */
+		mmc1: sdhci@09080000 {
+			status = "okay";
+		};
+
+		pwm0: pwm@9810000 {
+			status = "okay";
+		};
+
+		pwm1: pwm@9510000 {
+			status = "okay";
+		};
+
+		usb2_picophy1: phy2 {
+			status = "okay";
+		};
+
+		usb2_picophy2: phy3 {
+			status = "okay";
+		};
+
+		ohci0: usb@9a03c00 {
+			status = "okay";
+		};
+
+		ehci0: usb@9a03e00 {
+			status = "okay";
+		};
+
+		ohci1: usb@9a83c00 {
+			status = "okay";
+		};
+
+		ehci1: usb@9a83e00 {
+			status = "okay";
+		};
+
+		st_dwc3: dwc3@8f94000 {
+			status = "okay";
+		};
+
+		ethernet0: dwmac@9630000 {
+			phy-mode = "rgmii";
+			pinctrl-0 = <&pinctrl_rgmii1 &pinctrl_rgmii1_mdio_1>;
+
+			snps,phy-bus-name = "stmmac";
+			snps,phy-bus-id = <0>;
+			snps,phy-addr = <0>;
+			snps,reset-gpio = <&pio0 7 0>;
+			snps,reset-active-low;
+			snps,reset-delays-us = <0 10000 1000000>;
+
+			status = "okay";
+		};
+
+		/* SSC11 to HDMI */
+		hdmiddc: i2c@9541000 {
+			/* HDMI V1.3a supports Standard mode only */
+			clock-frequency = <100000>;
+			st,i2c-min-scl-pulse-width-us = <0>;
+			st,i2c-min-sda-pulse-width-us = <5>;
+			status = "okay";
+		};
+
+		sti-display-subsystem {
+			sti_hdmi: sti-hdmi@8d04000 {
+				status = "okay";
+			};
+		};
+
+		miphy28lp_phy: miphy28lp@9b22000 {
+
+			phy_port1: port@9b2a000 {
+				st,osc-force-ext;
+			};
+		};
+
+		sata1: sata@9b28000 {
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/stih410-clock.dtsi b/arch/arm/boot/dts/stih410-clock.dtsi
index fd50496..8598eff 100644
--- a/arch/arm/boot/dts/stih410-clock.dtsi
+++ b/arch/arm/boot/dts/stih410-clock.dtsi
@@ -44,7 +44,7 @@
 
 			clockgen_a9_pll: clockgen-a9-pll {
 				#clock-cells = <1>;
-				compatible = "st,stih407-plls-c32-a9", "st,clkgen-plls-c32";
+				compatible = "st,stih407-clkgen-plla9";
 
 				clocks = <&clk_sysin>;
 
@@ -98,7 +98,7 @@
 
 			clk_s_a0_pll: clk-s-a0-pll {
 				#clock-cells = <1>;
-				compatible = "st,stih407-plls-c32-a0", "st,clkgen-plls-c32";
+				compatible = "st,clkgen-pll0";
 
 				clocks = <&clk_sysin>;
 
@@ -122,7 +122,7 @@
 
 		clk_s_c0_quadfs: clk-s-c0-quadfs@9103000 {
 			#clock-cells = <1>;
-			compatible = "st,stih407-quadfs660-C", "st,quadfs";
+			compatible = "st,quadfs-pll";
 			reg = <0x9103000 0x1000>;
 
 			clocks = <&clk_sysin>;
@@ -140,7 +140,7 @@
 
 			clk_s_c0_pll0: clk-s-c0-pll0 {
 				#clock-cells = <1>;
-				compatible = "st,plls-c32-cx_0", "st,clkgen-plls-c32";
+				compatible = "st,clkgen-pll0";
 
 				clocks = <&clk_sysin>;
 
@@ -150,7 +150,7 @@
 
 			clk_s_c0_pll1: clk-s-c0-pll1 {
 				#clock-cells = <1>;
-				compatible = "st,plls-c32-cx_1", "st,clkgen-plls-c32";
+				compatible = "st,clkgen-pll1";
 
 				clocks = <&clk_sysin>;
 
@@ -218,7 +218,7 @@
 
 		clk_s_d0_quadfs: clk-s-d0-quadfs@9104000 {
 			#clock-cells = <1>;
-			compatible = "st,stih407-quadfs660-D", "st,quadfs";
+			compatible = "st,quadfs";
 			reg = <0x9104000 0x1000>;
 
 			clocks = <&clk_sysin>;
@@ -235,7 +235,7 @@
 
 			clk_s_d0_flexgen: clk-s-d0-flexgen {
 				#clock-cells = <1>;
-				compatible = "st,flexgen";
+				compatible = "st,flexgen-audio", "st,flexgen";
 
 				clocks = <&clk_s_d0_quadfs 0>,
 					 <&clk_s_d0_quadfs 1>,
@@ -254,7 +254,7 @@
 
 		clk_s_d2_quadfs: clk-s-d2-quadfs@9106000 {
 			#clock-cells = <1>;
-			compatible = "st,stih407-quadfs660-D", "st,quadfs";
+			compatible = "st,quadfs";
 			reg = <0x9106000 0x1000>;
 
 			clocks = <&clk_sysin>;
@@ -277,7 +277,7 @@
 
 			clk_s_d2_flexgen: clk-s-d2-flexgen {
 				#clock-cells = <1>;
-				compatible = "st,flexgen";
+				compatible = "st,flexgen-video", "st,flexgen";
 
 				clocks = <&clk_s_d2_quadfs 0>,
 					 <&clk_s_d2_quadfs 1>,
@@ -308,7 +308,7 @@
 
 		clk_s_d3_quadfs: clk-s-d3-quadfs@9107000 {
 			#clock-cells = <1>;
-			compatible = "st,stih407-quadfs660-D", "st,quadfs";
+			compatible = "st,quadfs";
 			reg = <0x9107000 0x1000>;
 
 			clocks = <&clk_sysin>;
diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi
index 4031886..a3ef734 100644
--- a/arch/arm/boot/dts/stih410.dtsi
+++ b/arch/arm/boot/dts/stih410.dtsi
@@ -107,7 +107,10 @@
 			#size-cells = <1>;
 
 			assigned-clocks	= <&clk_s_d2_quadfs 0>,
-					  <&clk_s_d2_quadfs 0>,
+					  <&clk_s_d2_quadfs 1>,
+					  <&clk_s_c0_pll1 0>,
+					  <&clk_s_c0_flexgen CLK_COMPO_DVP>,
+					  <&clk_s_c0_flexgen CLK_MAIN_DISP>,
 					  <&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>,
 					  <&clk_s_d2_flexgen CLK_PIX_AUX_DISP>,
 					  <&clk_s_d2_flexgen CLK_PIX_GDP1>,
@@ -117,14 +120,21 @@
 
 			assigned-clock-parents = <0>,
 						 <0>,
+						 <0>,
+						 <&clk_s_c0_pll1 0>,
+						 <&clk_s_c0_pll1 0>,
 						 <&clk_s_d2_quadfs 0>,
-						 <&clk_s_d2_quadfs 0>,
+						 <&clk_s_d2_quadfs 1>,
 						 <&clk_s_d2_quadfs 0>,
 						 <&clk_s_d2_quadfs 0>,
 						 <&clk_s_d2_quadfs 0>,
 						 <&clk_s_d2_quadfs 0>;
 
-			assigned-clock-rates = <297000000>, <297000000>;
+			assigned-clock-rates = <297000000>,
+					       <108000000>,
+					       <0>,
+					       <400000000>,
+					       <400000000>;
 
 			ranges;
 
@@ -231,5 +241,23 @@
 			clock-names = "bdisp";
 			clocks = <&clk_s_c0_flexgen CLK_IC_BDISP_0>;
 		};
+
+		hva@8c85000 {
+			compatible = "st,st-hva";
+			reg = <0x8c85000 0x400>, <0x6000000 0x40000>;
+			reg-names = "hva_registers", "hva_esram";
+			interrupts = <GIC_SPI 58 IRQ_TYPE_NONE>,
+				     <GIC_SPI 59 IRQ_TYPE_NONE>;
+			clock-names = "clk_hva";
+			clocks = <&clk_s_c0_flexgen CLK_HVA>;
+		};
+
+		thermal@91a0000 {
+			compatible = "st,stih407-thermal";
+			reg = <0x91a0000 0x28>;
+			clock-names = "thermal";
+			clocks = <&clk_sysin>;
+			interrupts = <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/stih415-pinctrl.dtsi b/arch/arm/boot/dts/stih415-pinctrl.dtsi
index 3791ad9..bd028ce 100644
--- a/arch/arm/boot/dts/stih415-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stih415-pinctrl.dtsi
@@ -54,7 +54,7 @@
 
 			pio0: gpio@fe610000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0 0x100>;
@@ -62,7 +62,7 @@
 			};
 			pio1: gpio@fe611000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x1000 0x100>;
@@ -70,7 +70,7 @@
 			};
 			pio2: gpio@fe612000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x2000 0x100>;
@@ -78,7 +78,7 @@
 			};
 			pio3: gpio@fe613000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x3000 0x100>;
@@ -86,7 +86,7 @@
 			};
 			pio4: gpio@fe614000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x4000 0x100>;
@@ -208,7 +208,7 @@
 
 			pio5: gpio@fee00000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0 0x100>;
@@ -216,7 +216,7 @@
 			};
 			pio6: gpio@fee01000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x1000 0x100>;
@@ -224,7 +224,7 @@
 			};
 			pio7: gpio@fee02000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x2000 0x100>;
@@ -232,7 +232,7 @@
 			};
 			pio8: gpio@fee03000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x3000 0x100>;
@@ -240,7 +240,7 @@
 			};
 			pio9: gpio@fee04000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x4000 0x100>;
@@ -248,7 +248,7 @@
 			};
 			pio10: gpio@fee05000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x5000 0x100>;
@@ -256,7 +256,7 @@
 			};
 			pio11: gpio@fee06000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x6000 0x100>;
@@ -264,7 +264,7 @@
 			};
 			pio12: gpio@fee07000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x7000 0x100>;
@@ -303,7 +303,7 @@
 
 			pio13: gpio@fe820000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0 0x100>;
@@ -311,7 +311,7 @@
 			};
 			pio14: gpio@fe821000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x1000 0x100>;
@@ -319,7 +319,7 @@
 			};
 			pio15: gpio@fe822000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x2000 0x100>;
@@ -327,7 +327,7 @@
 			};
 			pio16: gpio@fe823000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x3000 0x100>;
@@ -335,7 +335,7 @@
 			};
 			pio17: gpio@fe824000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x4000 0x100>;
@@ -343,7 +343,7 @@
 			};
 			pio18: gpio@fe825000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x5000 0x100>;
@@ -465,7 +465,7 @@
 
 			pio100: gpio@fd6b0000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0 0x100>;
@@ -473,7 +473,7 @@
 			};
 			pio101: gpio@fd6b1000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x1000 0x100>;
@@ -481,7 +481,7 @@
 			};
 			pio102: gpio@fd6b2000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x2000 0x100>;
@@ -502,7 +502,7 @@
 
 			pio103: gpio@fd330000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0 0x100>;
@@ -510,7 +510,7 @@
 			};
 			pio104: gpio@fd331000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x1000 0x100>;
@@ -518,7 +518,7 @@
 			};
 			pio105: gpio@fd332000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x2000 0x100>;
@@ -526,7 +526,7 @@
 			};
 			pio106: gpio@fd333000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x3000 0x100>;
@@ -534,7 +534,7 @@
 			};
 			pio107: gpio@fd334000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x4000 0x100>;
diff --git a/arch/arm/boot/dts/stih416-b2020e.dts b/arch/arm/boot/dts/stih416-b2020e.dts
index f1ceee1..de320cd 100644
--- a/arch/arm/boot/dts/stih416-b2020e.dts
+++ b/arch/arm/boot/dts/stih416-b2020e.dts
@@ -9,6 +9,7 @@
 /dts-v1/;
 #include "stih416.dtsi"
 #include "stih41x-b2020.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 / {
 	model = "STiH416 B2020 REV-E";
 	compatible = "st,stih416-b2020", "st,stih416";
@@ -17,13 +18,12 @@
 		leds {
 			compatible = "gpio-leds";
 			red {
-				#gpio-cells		= <1>;
 				label			= "Front Panel LED";
-				gpios			= <&pio4 1>;
+				gpios			= <&pio4 1 GPIO_ACTIVE_HIGH>;
 				linux,default-trigger	= "heartbeat";
 			};
 			green {
-				gpios			= <&pio1 3>;
+				gpios			= <&pio1 3 GPIO_ACTIVE_HIGH>;
 				default-state 		= "off";
 			};
 		};
diff --git a/arch/arm/boot/dts/stih416-pinctrl.dtsi b/arch/arm/boot/dts/stih416-pinctrl.dtsi
index 051fc16..9c97f7e6 100644
--- a/arch/arm/boot/dts/stih416-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stih416-pinctrl.dtsi
@@ -58,7 +58,7 @@
 
 			pio0: gpio@fe610000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0 0x100>;
@@ -66,7 +66,7 @@
 			};
 			pio1: gpio@fe611000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x1000 0x100>;
@@ -74,7 +74,7 @@
 			};
 			pio2: gpio@fe612000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x2000 0x100>;
@@ -82,7 +82,7 @@
 			};
 			pio3: gpio@fe613000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x3000 0x100>;
@@ -90,7 +90,7 @@
 			};
 			pio4: gpio@fe614000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x4000 0x100>;
@@ -98,7 +98,7 @@
 			};
 			pio40: gpio@fe615000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x5000 0x100>;
@@ -221,11 +221,14 @@
 				pinctrl_pwm1_chan0_default: pwm1-0-default {
 					st,pins {
 						pwm-out    = <&pio3 0 ALT1 OUT>;
+						pwm-capturein = <&pio3 2 ALT1 IN>;
+
 					};
 				};
 				pinctrl_pwm1_chan1_default: pwm1-1-default {
 					st,pins {
 						pwm-out    = <&pio4 4 ALT1 OUT>;
+						pwm-capturein = <&pio4 3 ALT1 IN>;
 					};
 				};
 				pinctrl_pwm1_chan2_default: pwm1-2-default {
@@ -254,7 +257,7 @@
 
 			pio5: gpio@fee00000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0 0x100>;
@@ -262,7 +265,7 @@
 			};
 			pio6: gpio@fee01000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x1000 0x100>;
@@ -270,7 +273,7 @@
 			};
 			pio7: gpio@fee02000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x2000 0x100>;
@@ -278,7 +281,7 @@
 			};
 			pio8: gpio@fee03000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x3000 0x100>;
@@ -286,7 +289,7 @@
 			};
 			pio9: gpio@fee04000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x4000 0x100>;
@@ -294,7 +297,7 @@
 			};
 			pio10: gpio@fee05000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x5000 0x100>;
@@ -302,7 +305,7 @@
 			};
 			pio11: gpio@fee06000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x6000 0x100>;
@@ -310,7 +313,7 @@
 			};
 			pio12: gpio@fee07000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x7000 0x100>;
@@ -318,7 +321,7 @@
 			};
 			pio30: gpio@fee08000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x8000 0x100>;
@@ -326,7 +329,7 @@
 			};
 			pio31: gpio@fee09000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x9000 0x100>;
@@ -337,6 +340,7 @@
 				pinctrl_pwm0_chan0_default: pwm0-0-default {
 					st,pins {
 						pwm-out    = <&pio9 7 ALT2 OUT>;
+						pwm-capturein = <&pio9 6 ALT2 IN>;
 					};
 				};
 			};
@@ -404,7 +408,7 @@
 
 			pio13: gpio@fe820000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0 0x100>;
@@ -412,7 +416,7 @@
 			};
 			pio14: gpio@fe821000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x1000 0x100>;
@@ -420,7 +424,7 @@
 			};
 			pio15: gpio@fe822000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x2000 0x100>;
@@ -428,7 +432,7 @@
 			};
 			pio16: gpio@fe823000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x3000 0x100>;
@@ -436,7 +440,7 @@
 			};
 			pio17: gpio@fe824000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x4000 0x100>;
@@ -444,7 +448,7 @@
 			};
 			pio18: gpio@fe825000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x5000 0x100>;
@@ -576,6 +580,7 @@
 				pinctrl_pwm0_chan1_default: pwm0-1-default {
 					st,pins {
 						pwm-out    = <&pio13 2 ALT2 OUT>;
+						pwm-capturein = <&pio13 1 ALT2 IN>;
 					};
 				};
 				pinctrl_pwm0_chan2_default: pwm0-2-default {
@@ -605,7 +610,7 @@
 
 			pio100: gpio@fd6b0000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0 0x100>;
@@ -613,7 +618,7 @@
 			};
 			pio101: gpio@fd6b1000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x1000 0x100>;
@@ -621,7 +626,7 @@
 			};
 			pio102: gpio@fd6b2000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x2000 0x100>;
@@ -642,7 +647,7 @@
 
 			pio103: gpio@fd330000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0 0x100>;
@@ -650,7 +655,7 @@
 			};
 			pio104: gpio@fd331000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x1000 0x100>;
@@ -658,7 +663,7 @@
 			};
 			pio105: gpio@fd332000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x2000 0x100>;
@@ -666,7 +671,7 @@
 			};
 			pio106: gpio@fd333000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x3000 0x100>;
@@ -675,7 +680,7 @@
 
 			pio107: gpio@fd334000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x4000 0x100>;
diff --git a/arch/arm/boot/dts/stih416.dtsi b/arch/arm/boot/dts/stih416.dtsi
index 9e3170c..fe1f9cf77 100644
--- a/arch/arm/boot/dts/stih416.dtsi
+++ b/arch/arm/boot/dts/stih416.dtsi
@@ -474,6 +474,7 @@
 			status		= "disabled";
 			#pwm-cells	= <2>;
 			reg		= <0xfed10000 0x68>;
+			interrupts      = <GIC_SPI 200 IRQ_TYPE_NONE>;
 
 			pinctrl-names	= "default";
 			pinctrl-0 = 	<&pinctrl_pwm0_chan0_default
@@ -481,9 +482,11 @@
 					&pinctrl_pwm0_chan2_default
 					&pinctrl_pwm0_chan3_default>;
 
-			clock-names	= "pwm";
-			clocks		= <&clk_sysin>;
+			clock-names	= "pwm", "capture";
+			clocks		= <&clk_sysin>, <&clk_s_a0_ls CLK_ICN_REG>;
+
 			st,pwm-num-chan = <4>;
+			st,capture-num-chan = <2>;
 		};
 
 		/* SBC PWM Module */
@@ -492,6 +495,7 @@
 			status		= "disabled";
 			#pwm-cells	= <2>;
 			reg		= <0xfe510000 0x68>;
+			interrupts      = <GIC_SPI 202 IRQ_TYPE_NONE>;
 
 			pinctrl-names	= "default";
 			pinctrl-0	= <&pinctrl_pwm1_chan0_default
diff --git a/arch/arm/boot/dts/stih418-b2199.dts b/arch/arm/boot/dts/stih418-b2199.dts
index 772d2bb..438e54c 100644
--- a/arch/arm/boot/dts/stih418-b2199.dts
+++ b/arch/arm/boot/dts/stih418-b2199.dts
@@ -8,6 +8,7 @@
  */
 /dts-v1/;
 #include "stih418.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 / {
 	model = "STiH418 B2199";
 	compatible = "st,stih418-b2199", "st,stih418";
@@ -35,14 +36,12 @@
 		leds {
 			compatible = "gpio-leds";
 			red {
-				#gpio-cells = <2>;
 				label = "Front Panel LED";
-				gpios = <&pio4 1 0>;
+				gpios = <&pio4 1 GPIO_ACTIVE_HIGH>;
 				linux,default-trigger = "heartbeat";
 			};
 			green {
-				#gpio-cells = <2>;
-				gpios = <&pio1 3 0>;
+				gpios = <&pio1 3 GPIO_ACTIVE_HIGH>;
 				default-state = "off";
 			};
 		};
@@ -86,6 +85,7 @@
 			sd-uhs-sdr50;
 			sd-uhs-sdr104;
 			sd-uhs-ddr50;
+			non-removable;
 		};
 
 		miphy28lp_phy: miphy28lp@9b22000 {
diff --git a/arch/arm/boot/dts/stih418-clock.dtsi b/arch/arm/boot/dts/stih418-clock.dtsi
index ae6d997..ee6614b7 100644
--- a/arch/arm/boot/dts/stih418-clock.dtsi
+++ b/arch/arm/boot/dts/stih418-clock.dtsi
@@ -44,7 +44,7 @@
 
 			clockgen_a9_pll: clockgen-a9-pll {
 				#clock-cells = <1>;
-				compatible = "st,stih418-plls-c28-a9", "st,clkgen-plls-c32";
+				compatible = "st,stih418-clkgen-plla9";
 
 				clocks = <&clk_sysin>;
 
@@ -98,7 +98,7 @@
 
 			clk_s_a0_pll: clk-s-a0-pll {
 				#clock-cells = <1>;
-				compatible = "st,stih407-plls-c32-a0", "st,clkgen-plls-c32";
+				compatible = "st,clkgen-pll0";
 
 				clocks = <&clk_sysin>;
 
@@ -120,7 +120,7 @@
 
 		clk_s_c0_quadfs: clk-s-c0-quadfs@9103000 {
 			#clock-cells = <1>;
-			compatible = "st,stih407-quadfs660-C", "st,quadfs";
+			compatible = "st,quadfs-pll";
 			reg = <0x9103000 0x1000>;
 
 			clocks = <&clk_sysin>;
@@ -137,7 +137,7 @@
 
 			clk_s_c0_pll0: clk-s-c0-pll0 {
 				#clock-cells = <1>;
-				compatible = "st,plls-c32-cx_0", "st,clkgen-plls-c32";
+				compatible = "st,clkgen-pll0";
 
 				clocks = <&clk_sysin>;
 
@@ -146,7 +146,7 @@
 
 			clk_s_c0_pll1: clk-s-c0-pll1 {
 				#clock-cells = <1>;
-				compatible = "st,plls-c32-cx_1", "st,clkgen-plls-c32";
+				compatible = "st,clkgen-pll1";
 
 				clocks = <&clk_sysin>;
 
@@ -212,7 +212,7 @@
 
 		clk_s_d0_quadfs: clk-s-d0-quadfs@9104000 {
 			#clock-cells = <1>;
-			compatible = "st,stih407-quadfs660-D", "st,quadfs";
+			compatible = "st,quadfs";
 			reg = <0x9104000 0x1000>;
 
 			clocks = <&clk_sysin>;
@@ -229,7 +229,7 @@
 
 			clk_s_d0_flexgen: clk-s-d0-flexgen {
 				#clock-cells = <1>;
-				compatible = "st,flexgen";
+				compatible = "st,flexgen-audio", "st,flexgen";
 
 				clocks = <&clk_s_d0_quadfs 0>,
 					 <&clk_s_d0_quadfs 1>,
@@ -248,7 +248,7 @@
 
 		clk_s_d2_quadfs: clk-s-d2-quadfs@9106000 {
 			#clock-cells = <1>;
-			compatible = "st,stih407-quadfs660-D", "st,quadfs";
+			compatible = "st,quadfs";
 			reg = <0x9106000 0x1000>;
 
 			clocks = <&clk_sysin>;
@@ -271,7 +271,7 @@
 
 			clk_s_d2_flexgen: clk-s-d2-flexgen {
 				#clock-cells = <1>;
-				compatible = "st,flexgen";
+				compatible = "st,flexgen-video", "st,flexgen";
 
 				clocks = <&clk_s_d2_quadfs 0>,
 					 <&clk_s_d2_quadfs 1>,
@@ -309,7 +309,7 @@
 
 		clk_s_d3_quadfs: clk-s-d3-quadfs@9107000 {
 			#clock-cells = <1>;
-			compatible = "st,stih407-quadfs660-D", "st,quadfs";
+			compatible = "st,quadfs";
 			reg = <0x9107000 0x1000>;
 
 			clocks = <&clk_sysin>;
diff --git a/arch/arm/boot/dts/stih41x-b2000.dtsi b/arch/arm/boot/dts/stih41x-b2000.dtsi
index 5f91f45..9bfa067 100644
--- a/arch/arm/boot/dts/stih41x-b2000.dtsi
+++ b/arch/arm/boot/dts/stih41x-b2000.dtsi
@@ -7,6 +7,8 @@
  * publishhed by the Free Software Foundation.
  */
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
 / {
 
 	memory{
@@ -33,9 +35,8 @@
 		leds {
 			compatible	= "gpio-leds";
 			fp_led {
-				#gpio-cells = <1>;
 				label	= "Front Panel LED";
-				gpios	= <&pio105 7>;
+				gpios	= <&pio105 7 GPIO_ACTIVE_HIGH>;
 				linux,default-trigger	= "heartbeat";
 			};
 		};
diff --git a/arch/arm/boot/dts/stih41x-b2020.dtsi b/arch/arm/boot/dts/stih41x-b2020.dtsi
index 487d7d8..322e0e9 100644
--- a/arch/arm/boot/dts/stih41x-b2020.dtsi
+++ b/arch/arm/boot/dts/stih41x-b2020.dtsi
@@ -7,6 +7,7 @@
  * publishhed by the Free Software Foundation.
  */
 #include "stih41x-b2020x.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 / {
 	memory{
 		device_type = "memory";
@@ -30,13 +31,12 @@
 		leds {
 			compatible	= "gpio-leds";
 			red {
-				#gpio-cells = <1>;
 				label	= "Front Panel LED";
-				gpios	= <&pio4 1>;
+				gpios	= <&pio4 1 GPIO_ACTIVE_HIGH>;
 				linux,default-trigger	= "heartbeat";
 			};
 			green {
-				gpios	= <&pio4 7>;
+				gpios	= <&pio4 7 GPIO_ACTIVE_HIGH>;
 				default-state = "off";
 			};
 		};
diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi
index 133375b..ed2b7a9 100644
--- a/arch/arm/boot/dts/stihxxx-b2120.dtsi
+++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi
@@ -18,14 +18,12 @@
 		leds {
 			compatible = "gpio-leds";
 			red {
-				#gpio-cells = <2>;
 				label = "Front Panel LED";
-				gpios = <&pio4 1 0>;
+				gpios = <&pio4 1 GPIO_ACTIVE_HIGH>;
 				linux,default-trigger = "heartbeat";
 			};
 			green {
-				#gpio-cells = <2>;
-				gpios = <&pio1 3 0>;
+				gpios = <&pio1 3 GPIO_ACTIVE_HIGH>;
 				default-state = "off";
 			};
 		};
@@ -65,6 +63,7 @@
 		};
 
 		mmc0: sdhci@09060000 {
+			non-removable;
 			status = "okay";
 		};
 
@@ -135,5 +134,50 @@
 				dvb-card	= <STV0367_TDA18212_NIMA_1>;
 			};
 		};
+
+		sti_uni_player2: sti-uni-player@8d82000 {
+			status = "okay";
+		};
+
+		sti_uni_player3: sti-uni-player@8d85000 {
+			status = "okay";
+		};
+
+		sti_sasg_codec: sti-sasg-codec {
+			status = "okay";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spdif_out>;
+		};
+
+		sound {
+			compatible = "simple-audio-card";
+			simple-audio-card,name = "sti audio card";
+			status = "okay";
+
+			simple-audio-card,dai-link@0 {
+				/* DAC */
+				format = "i2s";
+				mclk-fs = <256>;
+				cpu {
+					sound-dai = <&sti_uni_player2>;
+				};
+
+				codec {
+					sound-dai = <&sti_sasg_codec 1>;
+				};
+			};
+			simple-audio-card,dai-link@1 {
+				/* SPDIF */
+				format = "left_j";
+				mclk-fs = <128>;
+				cpu {
+					sound-dai = <&sti_uni_player3>;
+				};
+
+				codec {
+					sound-dai = <&sti_sasg_codec 0>;
+				};
+			};
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index 1a189d4..336ee4f 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -45,6 +45,7 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
+#include "skeleton.dtsi"
 #include "armv7-m.dtsi"
 #include <dt-bindings/pinctrl/stm32f429-pinfunc.h>
 
@@ -334,6 +335,7 @@
 		};
 
 		rcc: rcc@40023810 {
+			#reset-cells = <1>;
 			#clock-cells = <2>;
 			compatible = "st,stm32f42xx-rcc", "st,stm32-rcc";
 			reg = <0x40023800 0x400>;
diff --git a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts b/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts
index f3cb297..5f98582 100644
--- a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts
+++ b/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts
@@ -121,10 +121,6 @@
 	status = "okay";
 };
 
-&ohci1 {
-	status = "okay";
-};
-
 &otg_sram {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/uniphier-proxstream2-vodka.dts b/arch/arm/boot/dts/sun5i-a13-empire-electronix-m712.dts
similarity index 75%
copy from arch/arm/boot/dts/uniphier-proxstream2-vodka.dts
copy to arch/arm/boot/dts/sun5i-a13-empire-electronix-m712.dts
index 1fb8bd7..b1e2afd 100644
--- a/arch/arm/boot/dts/uniphier-proxstream2-vodka.dts
+++ b/arch/arm/boot/dts/sun5i-a13-empire-electronix-m712.dts
@@ -1,7 +1,5 @@
 /*
- * Device Tree Source for UniPhier ProXstream2 Vodka Board
- *
- * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright 2016 Hans de Goede <hdegoede@redhat.com>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -43,36 +41,11 @@
  */
 
 /dts-v1/;
-/include/ "uniphier-proxstream2.dtsi"
+#include "sun5i-a13.dtsi"
+#include "sun5i-reference-design-tablet.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
-	model = "UniPhier ProXstream2 Vodka Board";
-	compatible = "socionext,proxstream2-vodka", "socionext,proxstream2";
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x80000000>;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	aliases {
-		serial0 = &serial2;
-		serial1 = &serial0;
-		serial2 = &serial1;
-		i2c0 = &i2c0;
-		i2c4 = &i2c4;
-		i2c5 = &i2c5;
-		i2c6 = &i2c6;
-	};
-};
-
-&serial2 {
-	status = "okay";
-};
-
-&i2c0 {
-	status = "okay";
+	model = "Empire Electronix M712 tablet";
+	compatible = "empire-electronix,m712", "allwinner,sun5i-a13";
 };
diff --git a/arch/arm/boot/dts/sun5i-a13-inet-98v-rev2.dts b/arch/arm/boot/dts/sun5i-a13-inet-98v-rev2.dts
index 1b11ec9..439ae3b 100644
--- a/arch/arm/boot/dts/sun5i-a13-inet-98v-rev2.dts
+++ b/arch/arm/boot/dts/sun5i-a13-inet-98v-rev2.dts
@@ -42,171 +42,9 @@
 
 /dts-v1/;
 #include "sun5i-a13.dtsi"
-#include "sunxi-common-regulators.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
+#include "sun5i-reference-design-tablet.dtsi"
 
 / {
 	model = "INet-98V Rev 02";
 	compatible = "primux,inet98v-rev2", "allwinner,sun5i-a13";
-
-	aliases {
-		serial0 = &uart1;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-};
-
-&cpu0 {
-	cpu-supply = <&reg_dcdc2>;
-};
-
-&ehci0 {
-	status = "okay";
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
-	status = "okay";
-
-	axp209: pmic@34 {
-		reg = <0x34>;
-		interrupts = <0>;
-	};
-};
-
-#include "axp209.dtsi"
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
-	status = "okay";
-
-	pcf8563: rtc@51 {
-		compatible = "nxp,pcf8563";
-		reg = <0x51>;
-	};
-};
-
-&lradc {
-	vref-supply = <&reg_ldo2>;
-	status = "okay";
-
-	button@200 {
-		label = "Volume Up";
-		linux,code = <KEY_VOLUMEUP>;
-		channel = <0>;
-		voltage = <200000>;
-	};
-
-	button@400 {
-		label = "Volume Down";
-		linux,code = <KEY_VOLUMEDOWN>;
-		channel = <0>;
-		voltage = <400000>;
-	};
-};
-
-&mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_inet98fv2>;
-	vmmc-supply = <&reg_vcc3v3>;
-	bus-width = <4>;
-	cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
-	cd-inverted;
-	status = "okay";
-};
-
-&otg_sram {
-	status = "okay";
-};
-
-&pio {
-	mmc0_cd_pin_inet98fv2: mmc0_cd_pin@0 {
-		allwinner,pins = "PG0";
-		allwinner,function = "gpio_in";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-	};
-
-	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
-		allwinner,pins = "PG1";
-		allwinner,function = "gpio_in";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
-	};
-
-	usb0_id_detect_pin: usb0_id_detect_pin@0 {
-		allwinner,pins = "PG2";
-		allwinner,function = "gpio_in";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-	};
-};
-
-&reg_dcdc2 {
-	regulator-always-on;
-	regulator-min-microvolt = <1000000>;
-	regulator-max-microvolt = <1400000>;
-	regulator-name = "vdd-cpu";
-};
-
-&reg_dcdc3 {
-	regulator-always-on;
-	regulator-min-microvolt = <1250000>;
-	regulator-max-microvolt = <1250000>;
-	regulator-name = "vdd-int-pll";
-};
-
-&reg_ldo1 {
-	regulator-name = "vdd-rtc";
-};
-
-&reg_ldo2 {
-	regulator-always-on;
-	regulator-min-microvolt = <3000000>;
-	regulator-max-microvolt = <3000000>;
-	regulator-name = "avcc";
-};
-
-&reg_ldo3 {
-	regulator-min-microvolt = <3300000>;
-	regulator-max-microvolt = <3300000>;
-	regulator-name = "vcc-wifi";
-};
-
-&reg_usb0_vbus {
-	gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins_b>;
-	status = "okay";
-};
-
-&usb_otg {
-	dr_mode = "otg";
-	status = "okay";
-};
-
-&usb0_vbus_pin_a {
-	allwinner,pins = "PG12";
-};
-
-&usbphy {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
-	usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
-	usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
-	usb0_vbus-supply = <&reg_usb0_vbus>;
-	usb1_vbus-supply = <&reg_ldo3>;
-	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun5i-r8-chip.dts b/arch/arm/boot/dts/sun5i-r8-chip.dts
index f694482..b68a123 100644
--- a/arch/arm/boot/dts/sun5i-r8-chip.dts
+++ b/arch/arm/boot/dts/sun5i-r8-chip.dts
@@ -64,6 +64,16 @@
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		status {
+			label = "chip:white:status";
+			gpios = <&axp_gpio 2 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
 };
 
 &be0 {
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index 0d24f10..ce196045 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -47,7 +47,9 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/thermal/thermal.h>
 
+#include <dt-bindings/clock/sun6i-a31-ccu.h>
 #include <dt-bindings/pinctrl/sun4i-a10.h>
+#include <dt-bindings/reset/sun6i-a31-ccu.h>
 
 / {
 	interrupt-parent = <&gic>;
@@ -65,7 +67,10 @@
 			compatible = "allwinner,simple-framebuffer",
 				     "simple-framebuffer";
 			allwinner,pipeline = "de_be0-lcd0-hdmi";
-			clocks = <&pll6 0>;
+			clocks = <&ccu CLK_AHB1_BE0>, <&ccu CLK_AHB1_LCD0>,
+				 <&ccu CLK_AHB1_HDMI>, <&ccu CLK_DRAM_BE0>,
+				 <&ccu CLK_IEP_DRC0>, <&ccu CLK_BE0>,
+				 <&ccu CLK_LCD0_CH1>, <&ccu CLK_HDMI>;
 			status = "disabled";
 		};
 
@@ -73,7 +78,9 @@
 			compatible = "allwinner,simple-framebuffer",
 				     "simple-framebuffer";
 			allwinner,pipeline = "de_be0-lcd0";
-			clocks = <&pll6 0>;
+			clocks = <&ccu CLK_AHB1_BE0>, <&ccu CLK_AHB1_LCD0>,
+				 <&ccu CLK_DRAM_BE0>, <&ccu CLK_IEP_DRC0>,
+				 <&ccu CLK_BE0>, <&ccu CLK_LCD0_CH0>;
 			status = "disabled";
 		};
 	};
@@ -97,7 +104,7 @@
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <0>;
-			clocks = <&cpu>;
+			clocks = <&ccu CLK_CPU>;
 			clock-latency = <244144>; /* 8 32k periods */
 			operating-points = <
 				/* kHz	  uV */
@@ -192,235 +199,6 @@
 			clock-output-names = "osc32k";
 		};
 
-		pll1: clk@01c20000 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun6i-a31-pll1-clk";
-			reg = <0x01c20000 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll1";
-		};
-
-		pll6: clk@01c20028 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun6i-a31-pll6-clk";
-			reg = <0x01c20028 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll6", "pll6x2";
-		};
-
-		cpu: cpu@01c20050 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-cpu-clk";
-			reg = <0x01c20050 0x4>;
-
-			/*
-			 * PLL1 is listed twice here.
-			 * While it looks suspicious, it's actually documented
-			 * that way both in the datasheet and in the code from
-			 * Allwinner.
-			 */
-			clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>;
-			clock-output-names = "cpu";
-		};
-
-		axi: axi@01c20050 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-axi-clk";
-			reg = <0x01c20050 0x4>;
-			clocks = <&cpu>;
-			clock-output-names = "axi";
-		};
-
-		ahb1: ahb1@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun6i-a31-ahb1-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>;
-			clock-output-names = "ahb1";
-
-			/*
-			 * Clock AHB1 from PLL6, instead of CPU/AXI which
-			 * has rate changes due to cpufreq. Also the DMA
-			 * controller requires AHB1 clocked from PLL6.
-			 */
-			assigned-clocks = <&ahb1>;
-			assigned-clock-parents = <&pll6 0>;
-		};
-
-		ahb1_gates: clk@01c20060 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun6i-a31-ahb1-gates-clk";
-			reg = <0x01c20060 0x8>;
-			clocks = <&ahb1>;
-			clock-indices = <1>, <5>,
-					<6>, <8>, <9>,
-					<10>, <11>, <12>,
-					<13>, <14>,
-					<17>, <18>, <19>,
-					<20>, <21>, <22>,
-					<23>, <24>, <26>,
-					<27>, <29>,
-					<30>, <31>, <32>,
-					<36>, <37>, <40>,
-					<43>, <44>, <45>,
-					<46>, <47>, <50>,
-					<52>, <55>, <56>,
-					<57>, <58>;
-			clock-output-names = "ahb1_mipidsi", "ahb1_ss",
-					"ahb1_dma", "ahb1_mmc0", "ahb1_mmc1",
-					"ahb1_mmc2", "ahb1_mmc3", "ahb1_nand1",
-					"ahb1_nand0", "ahb1_sdram",
-					"ahb1_gmac", "ahb1_ts", "ahb1_hstimer",
-					"ahb1_spi0", "ahb1_spi1", "ahb1_spi2",
-					"ahb1_spi3", "ahb1_otg", "ahb1_ehci0",
-					"ahb1_ehci1", "ahb1_ohci0",
-					"ahb1_ohci1", "ahb1_ohci2", "ahb1_ve",
-					"ahb1_lcd0", "ahb1_lcd1", "ahb1_csi",
-					"ahb1_hdmi", "ahb1_de0", "ahb1_de1",
-					"ahb1_fe0", "ahb1_fe1", "ahb1_mp",
-					"ahb1_gpu", "ahb1_deu0", "ahb1_deu1",
-					"ahb1_drc0", "ahb1_drc1";
-		};
-
-		apb1: apb1@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-apb0-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&ahb1>;
-			clock-output-names = "apb1";
-		};
-
-		apb1_gates: clk@01c20068 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun6i-a31-apb1-gates-clk";
-			reg = <0x01c20068 0x4>;
-			clocks = <&apb1>;
-			clock-indices = <0>, <4>,
-					<5>, <12>,
-					<13>;
-			clock-output-names = "apb1_codec", "apb1_digital_mic",
-					"apb1_pio", "apb1_daudio0",
-					"apb1_daudio1";
-		};
-
-		apb2: clk@01c20058 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-apb1-clk";
-			reg = <0x01c20058 0x4>;
-			clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>;
-			clock-output-names = "apb2";
-		};
-
-		apb2_gates: clk@01c2006c {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun6i-a31-apb2-gates-clk";
-			reg = <0x01c2006c 0x4>;
-			clocks = <&apb2>;
-			clock-indices = <0>, <1>,
-					<2>, <3>, <16>,
-					<17>, <18>, <19>,
-					<20>, <21>;
-			clock-output-names = "apb2_i2c0", "apb2_i2c1",
-					     "apb2_i2c2", "apb2_i2c3",
-					     "apb2_uart0", "apb2_uart1",
-					     "apb2_uart2", "apb2_uart3",
-					     "apb2_uart4", "apb2_uart5";
-		};
-
-		mmc0_clk: clk@01c20088 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-mmc-clk";
-			reg = <0x01c20088 0x4>;
-			clocks = <&osc24M>, <&pll6 0>;
-			clock-output-names = "mmc0",
-					     "mmc0_output",
-					     "mmc0_sample";
-		};
-
-		mmc1_clk: clk@01c2008c {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-mmc-clk";
-			reg = <0x01c2008c 0x4>;
-			clocks = <&osc24M>, <&pll6 0>;
-			clock-output-names = "mmc1",
-					     "mmc1_output",
-					     "mmc1_sample";
-		};
-
-		mmc2_clk: clk@01c20090 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-mmc-clk";
-			reg = <0x01c20090 0x4>;
-			clocks = <&osc24M>, <&pll6 0>;
-			clock-output-names = "mmc2",
-					     "mmc2_output",
-					     "mmc2_sample";
-		};
-
-		mmc3_clk: clk@01c20094 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-mmc-clk";
-			reg = <0x01c20094 0x4>;
-			clocks = <&osc24M>, <&pll6 0>;
-			clock-output-names = "mmc3",
-					     "mmc3_output",
-					     "mmc3_sample";
-		};
-
-		ss_clk: clk@01c2009c {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c2009c 0x4>;
-			clocks = <&osc24M>, <&pll6 0>;
-			clock-output-names = "ss";
-		};
-
-		spi0_clk: clk@01c200a0 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200a0 0x4>;
-			clocks = <&osc24M>, <&pll6 0>;
-			clock-output-names = "spi0";
-		};
-
-		spi1_clk: clk@01c200a4 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200a4 0x4>;
-			clocks = <&osc24M>, <&pll6 0>;
-			clock-output-names = "spi1";
-		};
-
-		spi2_clk: clk@01c200a8 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200a8 0x4>;
-			clocks = <&osc24M>, <&pll6 0>;
-			clock-output-names = "spi2";
-		};
-
-		spi3_clk: clk@01c200ac {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200ac 0x4>;
-			clocks = <&osc24M>, <&pll6 0>;
-			clock-output-names = "spi3";
-		};
-
-		usb_clk: clk@01c200cc {
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-			compatible = "allwinner,sun6i-a31-usb-clk";
-			reg = <0x01c200cc 0x4>;
-			clocks = <&osc24M>;
-			clock-indices = <8>, <9>, <10>,
-					<16>, <17>,
-					<18>;
-			clock-output-names = "usb_phy0", "usb_phy1", "usb_phy2",
-					     "usb_ohci0", "usb_ohci1",
-					     "usb_ohci2";
-		};
-
 		/*
 		 * The following two are dummy clocks, placeholders
 		 * used in the gmac_tx clock. The gmac driver will
@@ -463,23 +241,23 @@
 			compatible = "allwinner,sun6i-a31-dma";
 			reg = <0x01c02000 0x1000>;
 			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ahb1_gates 6>;
-			resets = <&ahb1_rst 6>;
+			clocks = <&ccu CLK_AHB1_DMA>;
+			resets = <&ccu RST_AHB1_DMA>;
 			#dma-cells = <1>;
 		};
 
 		mmc0: mmc@01c0f000 {
 			compatible = "allwinner,sun7i-a20-mmc";
 			reg = <0x01c0f000 0x1000>;
-			clocks = <&ahb1_gates 8>,
-				 <&mmc0_clk 0>,
-				 <&mmc0_clk 1>,
-				 <&mmc0_clk 2>;
+			clocks = <&ccu CLK_AHB1_MMC0>,
+				 <&ccu CLK_MMC0>,
+				 <&ccu CLK_MMC0_OUTPUT>,
+				 <&ccu CLK_MMC0_SAMPLE>;
 			clock-names = "ahb",
 				      "mmc",
 				      "output",
 				      "sample";
-			resets = <&ahb1_rst 8>;
+			resets = <&ccu RST_AHB1_MMC0>;
 			reset-names = "ahb";
 			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
@@ -490,15 +268,15 @@
 		mmc1: mmc@01c10000 {
 			compatible = "allwinner,sun7i-a20-mmc";
 			reg = <0x01c10000 0x1000>;
-			clocks = <&ahb1_gates 9>,
-				 <&mmc1_clk 0>,
-				 <&mmc1_clk 1>,
-				 <&mmc1_clk 2>;
+			clocks = <&ccu CLK_AHB1_MMC1>,
+				 <&ccu CLK_MMC1>,
+				 <&ccu CLK_MMC1_OUTPUT>,
+				 <&ccu CLK_MMC1_SAMPLE>;
 			clock-names = "ahb",
 				      "mmc",
 				      "output",
 				      "sample";
-			resets = <&ahb1_rst 9>;
+			resets = <&ccu RST_AHB1_MMC1>;
 			reset-names = "ahb";
 			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
@@ -509,15 +287,15 @@
 		mmc2: mmc@01c11000 {
 			compatible = "allwinner,sun7i-a20-mmc";
 			reg = <0x01c11000 0x1000>;
-			clocks = <&ahb1_gates 10>,
-				 <&mmc2_clk 0>,
-				 <&mmc2_clk 1>,
-				 <&mmc2_clk 2>;
+			clocks = <&ccu CLK_AHB1_MMC2>,
+				 <&ccu CLK_MMC2>,
+				 <&ccu CLK_MMC2_OUTPUT>,
+				 <&ccu CLK_MMC2_SAMPLE>;
 			clock-names = "ahb",
 				      "mmc",
 				      "output",
 				      "sample";
-			resets = <&ahb1_rst 10>;
+			resets = <&ccu RST_AHB1_MMC2>;
 			reset-names = "ahb";
 			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
@@ -528,15 +306,15 @@
 		mmc3: mmc@01c12000 {
 			compatible = "allwinner,sun7i-a20-mmc";
 			reg = <0x01c12000 0x1000>;
-			clocks = <&ahb1_gates 11>,
-				 <&mmc3_clk 0>,
-				 <&mmc3_clk 1>,
-				 <&mmc3_clk 2>;
+			clocks = <&ccu CLK_AHB1_MMC3>,
+				 <&ccu CLK_MMC3>,
+				 <&ccu CLK_MMC3_OUTPUT>,
+				 <&ccu CLK_MMC3_SAMPLE>;
 			clock-names = "ahb",
 				      "mmc",
 				      "output",
 				      "sample";
-			resets = <&ahb1_rst 11>;
+			resets = <&ccu RST_AHB1_MMC3>;
 			reset-names = "ahb";
 			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
@@ -547,8 +325,8 @@
 		usb_otg: usb@01c19000 {
 			compatible = "allwinner,sun6i-a31-musb";
 			reg = <0x01c19000 0x0400>;
-			clocks = <&ahb1_gates 24>;
-			resets = <&ahb1_rst 24>;
+			clocks = <&ccu CLK_AHB1_OTG>;
+			resets = <&ccu RST_AHB1_OTG>;
 			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "mc";
 			phys = <&usbphy 0>;
@@ -565,15 +343,15 @@
 			reg-names = "phy_ctrl",
 				    "pmu1",
 				    "pmu2";
-			clocks = <&usb_clk 8>,
-				 <&usb_clk 9>,
-				 <&usb_clk 10>;
+			clocks = <&ccu CLK_USB_PHY0>,
+				 <&ccu CLK_USB_PHY1>,
+				 <&ccu CLK_USB_PHY2>;
 			clock-names = "usb0_phy",
 				      "usb1_phy",
 				      "usb2_phy";
-			resets = <&usb_clk 0>,
-				 <&usb_clk 1>,
-				 <&usb_clk 2>;
+			resets = <&ccu RST_USB_PHY0>,
+				 <&ccu RST_USB_PHY1>,
+				 <&ccu RST_USB_PHY2>;
 			reset-names = "usb0_reset",
 				      "usb1_reset",
 				      "usb2_reset";
@@ -585,8 +363,8 @@
 			compatible = "allwinner,sun6i-a31-ehci", "generic-ehci";
 			reg = <0x01c1a000 0x100>;
 			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ahb1_gates 26>;
-			resets = <&ahb1_rst 26>;
+			clocks = <&ccu CLK_AHB1_EHCI0>;
+			resets = <&ccu RST_AHB1_EHCI0>;
 			phys = <&usbphy 1>;
 			phy-names = "usb";
 			status = "disabled";
@@ -596,8 +374,8 @@
 			compatible = "allwinner,sun6i-a31-ohci", "generic-ohci";
 			reg = <0x01c1a400 0x100>;
 			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ahb1_gates 29>, <&usb_clk 16>;
-			resets = <&ahb1_rst 29>;
+			clocks = <&ccu CLK_AHB1_OHCI0>, <&ccu CLK_USB_OHCI0>;
+			resets = <&ccu RST_AHB1_OHCI0>;
 			phys = <&usbphy 1>;
 			phy-names = "usb";
 			status = "disabled";
@@ -607,8 +385,8 @@
 			compatible = "allwinner,sun6i-a31-ehci", "generic-ehci";
 			reg = <0x01c1b000 0x100>;
 			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ahb1_gates 27>;
-			resets = <&ahb1_rst 27>;
+			clocks = <&ccu CLK_AHB1_EHCI1>;
+			resets = <&ccu RST_AHB1_EHCI1>;
 			phys = <&usbphy 2>;
 			phy-names = "usb";
 			status = "disabled";
@@ -618,8 +396,8 @@
 			compatible = "allwinner,sun6i-a31-ohci", "generic-ohci";
 			reg = <0x01c1b400 0x100>;
 			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ahb1_gates 30>, <&usb_clk 17>;
-			resets = <&ahb1_rst 30>;
+			clocks = <&ccu CLK_AHB1_OHCI1>, <&ccu CLK_USB_OHCI1>;
+			resets = <&ccu RST_AHB1_OHCI1>;
 			phys = <&usbphy 2>;
 			phy-names = "usb";
 			status = "disabled";
@@ -629,11 +407,20 @@
 			compatible = "allwinner,sun6i-a31-ohci", "generic-ohci";
 			reg = <0x01c1c400 0x100>;
 			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ahb1_gates 31>, <&usb_clk 18>;
-			resets = <&ahb1_rst 31>;
+			clocks = <&ccu CLK_AHB1_OHCI2>, <&ccu CLK_USB_OHCI2>;
+			resets = <&ccu RST_AHB1_OHCI2>;
 			status = "disabled";
 		};
 
+		ccu: clock@01c20000 {
+			compatible = "allwinner,sun6i-a31-ccu";
+			reg = <0x01c20000 0x400>;
+			clocks = <&osc24M>, <&osc32k>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
 		pio: pinctrl@01c20800 {
 			compatible = "allwinner,sun6i-a31-pinctrl";
 			reg = <0x01c20800 0x400>;
@@ -641,7 +428,7 @@
 				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb1_gates 5>;
+			clocks = <&ccu CLK_APB1_PIO>;
 			gpio-controller;
 			interrupt-controller;
 			#interrupt-cells = <3>;
@@ -762,24 +549,6 @@
 			};
 		};
 
-		ahb1_rst: reset@01c202c0 {
-			#reset-cells = <1>;
-			compatible = "allwinner,sun6i-a31-ahb1-reset";
-			reg = <0x01c202c0 0xc>;
-		};
-
-		apb1_rst: reset@01c202d0 {
-			#reset-cells = <1>;
-			compatible = "allwinner,sun6i-a31-clock-reset";
-			reg = <0x01c202d0 0x4>;
-		};
-
-		apb2_rst: reset@01c202d8 {
-			#reset-cells = <1>;
-			compatible = "allwinner,sun6i-a31-clock-reset";
-			reg = <0x01c202d8 0x4>;
-		};
-
 		timer@01c20c00 {
 			compatible = "allwinner,sun4i-a10-timer";
 			reg = <0x01c20c00 0xa0>;
@@ -816,8 +585,8 @@
 			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&apb2_gates 16>;
-			resets = <&apb2_rst 16>;
+			clocks = <&ccu CLK_APB2_UART0>;
+			resets = <&ccu RST_APB2_UART0>;
 			dmas = <&dma 6>, <&dma 6>;
 			dma-names = "rx", "tx";
 			status = "disabled";
@@ -829,8 +598,8 @@
 			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&apb2_gates 17>;
-			resets = <&apb2_rst 17>;
+			clocks = <&ccu CLK_APB2_UART1>;
+			resets = <&ccu RST_APB2_UART1>;
 			dmas = <&dma 7>, <&dma 7>;
 			dma-names = "rx", "tx";
 			status = "disabled";
@@ -842,8 +611,8 @@
 			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&apb2_gates 18>;
-			resets = <&apb2_rst 18>;
+			clocks = <&ccu CLK_APB2_UART2>;
+			resets = <&ccu RST_APB2_UART2>;
 			dmas = <&dma 8>, <&dma 8>;
 			dma-names = "rx", "tx";
 			status = "disabled";
@@ -855,8 +624,8 @@
 			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&apb2_gates 19>;
-			resets = <&apb2_rst 19>;
+			clocks = <&ccu CLK_APB2_UART3>;
+			resets = <&ccu RST_APB2_UART3>;
 			dmas = <&dma 9>, <&dma 9>;
 			dma-names = "rx", "tx";
 			status = "disabled";
@@ -868,8 +637,8 @@
 			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&apb2_gates 20>;
-			resets = <&apb2_rst 20>;
+			clocks = <&ccu CLK_APB2_UART4>;
+			resets = <&ccu RST_APB2_UART4>;
 			dmas = <&dma 10>, <&dma 10>;
 			dma-names = "rx", "tx";
 			status = "disabled";
@@ -881,8 +650,8 @@
 			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&apb2_gates 21>;
-			resets = <&apb2_rst 21>;
+			clocks = <&ccu CLK_APB2_UART5>;
+			resets = <&ccu RST_APB2_UART5>;
 			dmas = <&dma 22>, <&dma 22>;
 			dma-names = "rx", "tx";
 			status = "disabled";
@@ -892,8 +661,8 @@
 			compatible = "allwinner,sun6i-a31-i2c";
 			reg = <0x01c2ac00 0x400>;
 			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb2_gates 0>;
-			resets = <&apb2_rst 0>;
+			clocks = <&ccu CLK_APB2_I2C0>;
+			resets = <&ccu RST_APB2_I2C0>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -903,8 +672,8 @@
 			compatible = "allwinner,sun6i-a31-i2c";
 			reg = <0x01c2b000 0x400>;
 			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb2_gates 1>;
-			resets = <&apb2_rst 1>;
+			clocks = <&ccu CLK_APB2_I2C1>;
+			resets = <&ccu RST_APB2_I2C1>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -914,8 +683,8 @@
 			compatible = "allwinner,sun6i-a31-i2c";
 			reg = <0x01c2b400 0x400>;
 			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb2_gates 2>;
-			resets = <&apb2_rst 2>;
+			clocks = <&ccu CLK_APB2_I2C2>;
+			resets = <&ccu RST_APB2_I2C2>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -925,8 +694,8 @@
 			compatible = "allwinner,sun6i-a31-i2c";
 			reg = <0x01c2b800 0x400>;
 			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb2_gates 3>;
-			resets = <&apb2_rst 3>;
+			clocks = <&ccu CLK_APB2_I2C3>;
+			resets = <&ccu RST_APB2_I2C3>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -937,9 +706,9 @@
 			reg = <0x01c30000 0x1054>;
 			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "macirq";
-			clocks = <&ahb1_gates 17>, <&gmac_tx_clk>;
+			clocks = <&ccu CLK_AHB1_EMAC>, <&gmac_tx_clk>;
 			clock-names = "stmmaceth", "allwinner_gmac_tx";
-			resets = <&ahb1_rst 17>;
+			resets = <&ccu RST_AHB1_EMAC>;
 			reset-names = "stmmaceth";
 			snps,pbl = <2>;
 			snps,fixed-burst;
@@ -953,9 +722,9 @@
 			compatible = "allwinner,sun4i-a10-crypto";
 			reg = <0x01c15000 0x1000>;
 			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ahb1_gates 5>, <&ss_clk>;
+			clocks = <&ccu CLK_AHB1_SS>, <&ccu CLK_SS>;
 			clock-names = "ahb", "mod";
-			resets = <&ahb1_rst 5>;
+			resets = <&ccu RST_AHB1_SS>;
 			reset-names = "ahb";
 		};
 
@@ -967,19 +736,19 @@
 				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ahb1_gates 19>;
-			resets = <&ahb1_rst 19>;
+			clocks = <&ccu CLK_AHB1_HSTIMER>;
+			resets = <&ccu RST_AHB1_HSTIMER>;
 		};
 
 		spi0: spi@01c68000 {
 			compatible = "allwinner,sun6i-a31-spi";
 			reg = <0x01c68000 0x1000>;
 			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ahb1_gates 20>, <&spi0_clk>;
+			clocks = <&ccu CLK_AHB1_SPI0>, <&ccu CLK_SPI0>;
 			clock-names = "ahb", "mod";
 			dmas = <&dma 23>, <&dma 23>;
 			dma-names = "rx", "tx";
-			resets = <&ahb1_rst 20>;
+			resets = <&ccu RST_AHB1_SPI0>;
 			status = "disabled";
 		};
 
@@ -987,11 +756,11 @@
 			compatible = "allwinner,sun6i-a31-spi";
 			reg = <0x01c69000 0x1000>;
 			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ahb1_gates 21>, <&spi1_clk>;
+			clocks = <&ccu CLK_AHB1_SPI1>, <&ccu CLK_SPI1>;
 			clock-names = "ahb", "mod";
 			dmas = <&dma 24>, <&dma 24>;
 			dma-names = "rx", "tx";
-			resets = <&ahb1_rst 21>;
+			resets = <&ccu RST_AHB1_SPI1>;
 			status = "disabled";
 		};
 
@@ -999,11 +768,11 @@
 			compatible = "allwinner,sun6i-a31-spi";
 			reg = <0x01c6a000 0x1000>;
 			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ahb1_gates 22>, <&spi2_clk>;
+			clocks = <&ccu CLK_AHB1_SPI2>, <&ccu CLK_SPI2>;
 			clock-names = "ahb", "mod";
 			dmas = <&dma 25>, <&dma 25>;
 			dma-names = "rx", "tx";
-			resets = <&ahb1_rst 22>;
+			resets = <&ccu RST_AHB1_SPI2>;
 			status = "disabled";
 		};
 
@@ -1011,11 +780,11 @@
 			compatible = "allwinner,sun6i-a31-spi";
 			reg = <0x01c6b000 0x1000>;
 			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ahb1_gates 23>, <&spi3_clk>;
+			clocks = <&ccu CLK_AHB1_SPI3>, <&ccu CLK_SPI3>;
 			clock-names = "ahb", "mod";
 			dmas = <&dma 26>, <&dma 26>;
 			dma-names = "rx", "tx";
-			resets = <&ahb1_rst 23>;
+			resets = <&ccu RST_AHB1_SPI3>;
 			status = "disabled";
 		};
 
@@ -1052,8 +821,9 @@
 			ar100: ar100_clk {
 				compatible = "allwinner,sun6i-a31-ar100-clk";
 				#clock-cells = <0>;
-				clocks = <&osc32k>, <&osc24M>, <&pll6 0>,
-					 <&pll6 0>;
+				clocks = <&osc32k>, <&osc24M>,
+					 <&ccu CLK_PLL_PERIPH>,
+					 <&ccu CLK_PLL_PERIPH>;
 				clock-output-names = "ar100";
 			};
 
diff --git a/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts b/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts
index e182eec..882a4d8 100644
--- a/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts
+++ b/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts
@@ -42,32 +42,11 @@
 
 /dts-v1/;
 #include "sun6i-a31s.dtsi"
-#include "sunxi-common-regulators.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
+#include "sun6i-reference-design-tablet.dtsi"
 
 / {
 	model = "Colorfly E708 Q1 tablet";
 	compatible = "colorfly,e708-q1", "allwinner,sun6i-a31s";
-
-	aliases {
-		serial0 = &uart0;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-&cpu0 {
-	cpu-supply = <&reg_dcdc3>;
-};
-
-&ehci0 {
-	/* rtl8188etv wifi is connected here */
-	status = "okay";
 };
 
 &lradc {
@@ -82,103 +61,6 @@
 	};
 };
 
-&mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_e708_q1>;
-	vmmc-supply = <&reg_dcdc1>;
-	bus-width = <4>;
-	cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
-	cd-inverted;
-	status = "okay";
-};
-
-&pio {
-	mma8452_int_e708_q1: mma8452_int_pin@0 {
-		allwinner,pins = "PA9";
-		allwinner,function = "gpio_in";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-	};
-
-	mmc0_cd_pin_e708_q1: mmc0_cd_pin@0 {
-		allwinner,pins = "PA8";
-		allwinner,function = "gpio_in";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-	};
-};
-
-&p2wi {
-	status = "okay";
-
-	axp22x: pmic@68 {
-		compatible = "x-powers,axp221";
-		reg = <0x68>;
-		interrupt-parent = <&nmi_intc>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-	};
-};
-
-#include "axp22x.dtsi"
-
-&reg_aldo3 {
-	regulator-always-on;
-	regulator-min-microvolt = <2700000>;
-	regulator-max-microvolt = <3300000>;
-	regulator-name = "avcc";
-};
-
-&reg_dc1sw {
-	regulator-name = "vcc-lcd";
-};
-
-&reg_dc5ldo {
-	regulator-always-on;
-	regulator-min-microvolt = <700000>;
-	regulator-max-microvolt = <1320000>;
-	regulator-name = "vdd-cpus"; /* This is an educated guess */
-};
-
-&reg_dcdc1 {
-	regulator-always-on;
-	regulator-min-microvolt = <3000000>;
-	regulator-max-microvolt = <3000000>;
-	regulator-name = "vcc-3v0";
-};
-
-&reg_dcdc2 {
-	regulator-min-microvolt = <700000>;
-	regulator-max-microvolt = <1320000>;
-	regulator-name = "vdd-gpu";
-};
-
-&reg_dcdc3 {
-	regulator-always-on;
-	regulator-min-microvolt = <700000>;
-	regulator-max-microvolt = <1320000>;
-	regulator-name = "vdd-cpu";
-};
-
-&reg_dcdc4 {
-	regulator-always-on;
-	regulator-min-microvolt = <700000>;
-	regulator-max-microvolt = <1320000>;
-	regulator-name = "vdd-sys-dll";
-};
-
-&reg_dcdc5 {
-	regulator-always-on;
-	regulator-min-microvolt = <1500000>;
-	regulator-max-microvolt = <1500000>;
-	regulator-name = "vcc-dram";
-};
-
-&reg_dldo1 {
-	regulator-min-microvolt = <3300000>;
-	regulator-max-microvolt = <3300000>;
-	regulator-name = "vcc-wifi";
-};
-
 &reg_dldo2 {
 	regulator-min-microvolt = <1800000>;
 	regulator-max-microvolt = <1800000>;
@@ -186,23 +68,5 @@
 };
 
 &simplefb_lcd {
-	vcc-lcd-supply = <&reg_dc1sw>;
 	vcc-pg-supply = <&reg_dldo2>;
 };
-
-/*
- * FIXME for now we only support host mode and rely on u-boot to have
- * turned on Vbus which is controlled by the axp221 pmic on the board.
- *
- * Once we have axp221 power-supply and vbus-usb support we should switch
- * to fully supporting otg.
- */
-&usb_otg {
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usbphy {
-	usb1_vbus-supply = <&reg_dldo1>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts b/arch/arm/boot/dts/sun6i-a31s-inet-q972.dts
similarity index 69%
copy from arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts
copy to arch/arm/boot/dts/sun6i-a31s-inet-q972.dts
index d594f40..e584e6b 100644
--- a/arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts
+++ b/arch/arm/boot/dts/sun6i-a31s-inet-q972.dts
@@ -1,7 +1,5 @@
 /*
- * Device Tree Source for UniPhier PH1-sLD8 Reference Board
- *
- * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright 2016 Hans de Goede <hdegoede@redhat.com>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -43,63 +41,60 @@
  */
 
 /dts-v1/;
-/include/ "uniphier-ph1-sld8.dtsi"
-/include/ "uniphier-ref-daughter.dtsi"
-/include/ "uniphier-support-card.dtsi"
+#include "sun6i-a31s.dtsi"
+#include "sun6i-reference-design-tablet.dtsi"
 
 / {
-	model = "UniPhier PH1-sLD8 Reference Board";
-	compatible = "socionext,ph1-sld8-ref", "socionext,ph1-sld8";
+	model = "iNet Q972 tablet";
+	compatible = "inet-tek,inet-q972", "allwinner,sun6i-a31s";
+};
 
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x20000000>;
-	};
+&ehci1 {
+	status = "okay";
+};
 
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
 
-	aliases {
-		serial0 = &serial0;
-		serial1 = &serial1;
-		serial2 = &serial2;
-		serial3 = &serial3;
-		i2c0 = &i2c0;
-		i2c1 = &i2c1;
-		i2c2 = &i2c2;
-		i2c3 = &i2c3;
+	ft5406ee8: touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		interrupt-parent = <&pio>;
+		interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>; /* PA3 */
+		touchscreen-size-x = <768>;
+		touchscreen-size-y = <1024>;
+		touchscreen-swapped-x-y;
 	};
 };
 
-&ethsc {
-	interrupts = <0 48 4>;
-};
-
-&serial0 {
+&lradc {
+	vref-supply = <&reg_aldo3>;
 	status = "okay";
+
+	button@200 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button@900 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <900000>;
+	};
+
+	button@1200 {
+		label = "Back";
+		linux,code = <KEY_BACK>;
+		channel = <0>;
+		voltage = <1200000>;
+	};
 };
 
-&serial2 {
-	status = "okay";
-};
-
-&serial3 {
-	status = "okay";
-};
-
-&i2c0 {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-};
-
-&usb1 {
-	status = "okay";
-};
-
-&usb2 {
+&ohci1 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi
new file mode 100644
index 0000000..0c43430
--- /dev/null
+++ b/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi
@@ -0,0 +1,193 @@
+/*
+ * Copyright 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc3>;
+};
+
+&ehci0 {
+	/* Wifi is connected here */
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_e708_q1>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
+	cd-inverted;
+	status = "okay";
+};
+
+&pio {
+	mmc0_cd_pin_e708_q1: mmc0_cd_pin@0 {
+		allwinner,pins = "PA8";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PA15";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+};
+
+&p2wi {
+	status = "okay";
+
+	axp22x: pmic@68 {
+		compatible = "x-powers,axp221";
+		reg = <0x68>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		drivevbus-supply = <&reg_vcc5v0>;
+		x-powers,drive-vbus-en;
+	};
+};
+
+#include "axp22x.dtsi"
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avcc";
+};
+
+&reg_dc1sw {
+	regulator-name = "vcc-lcd";
+};
+
+&reg_dc5ldo {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpus"; /* This is an educated guess */
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-3v0";
+};
+
+&reg_dcdc2 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-gpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc4 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-sys-dll";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&simplefb_lcd {
+	vcc-lcd-supply = <&reg_dc1sw>;
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>;
+	usb0_id_det-gpio = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_drivevbus>;
+	usb1_vbus-supply = <&reg_dldo1>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
index e3b196e..48fc24f 100644
--- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi
+++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
@@ -46,7 +46,9 @@
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 
+#include <dt-bindings/clock/sun8i-a23-a33-ccu.h>
 #include <dt-bindings/pinctrl/sun4i-a10.h>
+#include <dt-bindings/reset/sun8i-a23-a33-ccu.h>
 
 / {
 	interrupt-parent = <&gic>;
@@ -60,7 +62,9 @@
 			compatible = "allwinner,simple-framebuffer",
 				     "simple-framebuffer";
 			allwinner,pipeline = "de_be0-lcd0";
-			clocks = <&pll6 0>;
+			clocks = <&ccu CLK_BUS_LCD>, <&ccu CLK_BUS_DE_BE>,
+				 <&ccu CLK_LCD_CH0>, <&ccu CLK_DE_BE>,
+				 <&ccu CLK_DRAM_DE_BE>, <&ccu CLK_DRC>;
 			status = "disabled";
 		};
 	};
@@ -111,143 +115,6 @@
 			clock-frequency = <32768>;
 			clock-output-names = "osc32k";
 		};
-
-		pll1: clk@01c20000 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun8i-a23-pll1-clk";
-			reg = <0x01c20000 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll1";
-		};
-
-		/* dummy clock until actually implemented */
-		pll5: pll5_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <0>;
-			clock-output-names = "pll5";
-		};
-
-		pll6: clk@01c20028 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun6i-a31-pll6-clk";
-			reg = <0x01c20028 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll6", "pll6x2";
-		};
-
-		cpu: cpu_clk@01c20050 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-cpu-clk";
-			reg = <0x01c20050 0x4>;
-
-			/*
-			 * PLL1 is listed twice here.
-			 * While it looks suspicious, it's actually documented
-			 * that way both in the datasheet and in the code from
-			 * Allwinner.
-			 */
-			clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>;
-			clock-output-names = "cpu";
-		};
-
-		axi: axi_clk@01c20050 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun8i-a23-axi-clk";
-			reg = <0x01c20050 0x4>;
-			clocks = <&cpu>;
-			clock-output-names = "axi";
-		};
-
-		ahb1: ahb1_clk@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun6i-a31-ahb1-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>;
-			clock-output-names = "ahb1";
-		};
-
-		apb1: apb1_clk@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-apb0-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&ahb1>;
-			clock-output-names = "apb1";
-		};
-
-		apb1_gates: clk@01c20068 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun8i-a23-apb1-gates-clk";
-			reg = <0x01c20068 0x4>;
-			clocks = <&apb1>;
-			clock-indices = <0>, <5>,
-					<12>, <13>;
-			clock-output-names = "apb1_codec", "apb1_pio",
-					"apb1_daudio0",	"apb1_daudio1";
-		};
-
-		apb2: clk@01c20058 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-apb1-clk";
-			reg = <0x01c20058 0x4>;
-			clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>;
-			clock-output-names = "apb2";
-		};
-
-		apb2_gates: clk@01c2006c {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun8i-a23-apb2-gates-clk";
-			reg = <0x01c2006c 0x4>;
-			clocks = <&apb2>;
-			clock-indices = <0>, <1>,
-					<2>, <16>,
-					<17>, <18>,
-					<19>, <20>;
-			clock-output-names = "apb2_i2c0", "apb2_i2c1",
-					"apb2_i2c2", "apb2_uart0",
-					"apb2_uart1", "apb2_uart2",
-					"apb2_uart3", "apb2_uart4";
-		};
-
-		mmc0_clk: clk@01c20088 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-mmc-clk";
-			reg = <0x01c20088 0x4>;
-			clocks = <&osc24M>, <&pll6 0>;
-			clock-output-names = "mmc0",
-					     "mmc0_output",
-					     "mmc0_sample";
-		};
-
-		mmc1_clk: clk@01c2008c {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-mmc-clk";
-			reg = <0x01c2008c 0x4>;
-			clocks = <&osc24M>, <&pll6 0>;
-			clock-output-names = "mmc1",
-					     "mmc1_output",
-					     "mmc1_sample";
-		};
-
-		mmc2_clk: clk@01c20090 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-mmc-clk";
-			reg = <0x01c20090 0x4>;
-			clocks = <&osc24M>, <&pll6 0>;
-			clock-output-names = "mmc2",
-					     "mmc2_output",
-					     "mmc2_sample";
-		};
-
-		usb_clk: clk@01c200cc {
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-			compatible = "allwinner,sun8i-a23-usb-clk";
-			reg = <0x01c200cc 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "usb_phy0", "usb_phy1", "usb_hsic",
-					     "usb_hsic_12M", "usb_ohci0";
-		};
 	};
 
 	soc@01c00000 {
@@ -260,23 +127,23 @@
 			compatible = "allwinner,sun8i-a23-dma";
 			reg = <0x01c02000 0x1000>;
 			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ahb1_gates 6>;
-			resets = <&ahb1_rst 6>;
+			clocks = <&ccu CLK_BUS_DMA>;
+			resets = <&ccu RST_BUS_DMA>;
 			#dma-cells = <1>;
 		};
 
 		mmc0: mmc@01c0f000 {
 			compatible = "allwinner,sun7i-a20-mmc";
 			reg = <0x01c0f000 0x1000>;
-			clocks = <&ahb1_gates 8>,
-				 <&mmc0_clk 0>,
-				 <&mmc0_clk 1>,
-				 <&mmc0_clk 2>;
+			clocks = <&ccu CLK_BUS_MMC0>,
+				 <&ccu CLK_MMC0>,
+				 <&ccu CLK_MMC0_OUTPUT>,
+				 <&ccu CLK_MMC0_SAMPLE>;
 			clock-names = "ahb",
 				      "mmc",
 				      "output",
 				      "sample";
-			resets = <&ahb1_rst 8>;
+			resets = <&ccu RST_BUS_MMC0>;
 			reset-names = "ahb";
 			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
@@ -287,15 +154,15 @@
 		mmc1: mmc@01c10000 {
 			compatible = "allwinner,sun7i-a20-mmc";
 			reg = <0x01c10000 0x1000>;
-			clocks = <&ahb1_gates 9>,
-				 <&mmc1_clk 0>,
-				 <&mmc1_clk 1>,
-				 <&mmc1_clk 2>;
+			clocks = <&ccu CLK_BUS_MMC1>,
+				 <&ccu CLK_MMC1>,
+				 <&ccu CLK_MMC1_OUTPUT>,
+				 <&ccu CLK_MMC1_SAMPLE>;
 			clock-names = "ahb",
 				      "mmc",
 				      "output",
 				      "sample";
-			resets = <&ahb1_rst 9>;
+			resets = <&ccu RST_BUS_MMC1>;
 			reset-names = "ahb";
 			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
@@ -306,15 +173,15 @@
 		mmc2: mmc@01c11000 {
 			compatible = "allwinner,sun7i-a20-mmc";
 			reg = <0x01c11000 0x1000>;
-			clocks = <&ahb1_gates 10>,
-				 <&mmc2_clk 0>,
-				 <&mmc2_clk 1>,
-				 <&mmc2_clk 2>;
+			clocks = <&ccu CLK_BUS_MMC2>,
+				 <&ccu CLK_MMC2>,
+				 <&ccu CLK_MMC2_OUTPUT>,
+				 <&ccu CLK_MMC2_SAMPLE>;
 			clock-names = "ahb",
 				      "mmc",
 				      "output",
 				      "sample";
-			resets = <&ahb1_rst 10>;
+			resets = <&ccu RST_BUS_MMC2>;
 			reset-names = "ahb";
 			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
@@ -322,12 +189,55 @@
 			#size-cells = <0>;
 		};
 
+		nfc: nand@01c03000 {
+			compatible = "allwinner,sun4i-a10-nand";
+			reg = <0x01c03000 0x1000>;
+			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_NAND>, <&ccu CLK_NAND>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_BUS_NAND>;
+			reset-names = "ahb";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		usb_otg: usb@01c19000 {
+			/* compatible gets set in SoC specific dtsi file */
+			reg = <0x01c19000 0x0400>;
+			clocks = <&ccu CLK_BUS_OTG>;
+			resets = <&ccu RST_BUS_OTG>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			status = "disabled";
+		};
+
+		usbphy: phy@01c19400 {
+			/*
+			 * compatible and address regions get set in
+			 * SoC specific dtsi file
+			 */
+			clocks = <&ccu CLK_USB_PHY0>,
+				 <&ccu CLK_USB_PHY1>;
+			clock-names = "usb0_phy",
+				      "usb1_phy";
+			resets = <&ccu RST_USB_PHY0>,
+				 <&ccu RST_USB_PHY1>;
+			reset-names = "usb0_reset",
+				      "usb1_reset";
+			status = "disabled";
+			#phy-cells = <1>;
+		};
+
 		ehci0: usb@01c1a000 {
 			compatible = "allwinner,sun8i-a23-ehci", "generic-ehci";
 			reg = <0x01c1a000 0x100>;
 			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ahb1_gates 26>;
-			resets = <&ahb1_rst 26>;
+			clocks = <&ccu CLK_BUS_EHCI>;
+			resets = <&ccu RST_BUS_EHCI>;
 			phys = <&usbphy 1>;
 			phy-names = "usb";
 			status = "disabled";
@@ -337,18 +247,26 @@
 			compatible = "allwinner,sun8i-a23-ohci", "generic-ohci";
 			reg = <0x01c1a400 0x100>;
 			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ahb1_gates 29>, <&usb_clk 16>;
-			resets = <&ahb1_rst 29>;
+			clocks = <&ccu CLK_BUS_OHCI>, <&ccu CLK_USB_OHCI>;
+			resets = <&ccu RST_BUS_OHCI>;
 			phys = <&usbphy 1>;
 			phy-names = "usb";
 			status = "disabled";
 		};
 
+		ccu: clock@01c20000 {
+			reg = <0x01c20000 0x400>;
+			clocks = <&osc24M>, <&osc32k>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
 		pio: pinctrl@01c20800 {
 			/* compatible gets set in SoC specific dtsi file */
 			reg = <0x01c20800 0x400>;
 			/* interrupts get set in SoC specific dtsi file */
-			clocks = <&apb1_gates 5>;
+			clocks = <&ccu CLK_BUS_PIO>;
 			gpio-controller;
 			interrupt-controller;
 			#interrupt-cells = <3>;
@@ -361,6 +279,16 @@
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
+			uart1_pins_a: uart1@0 {
+				allwinner,pins = "PG6", "PG7";
+				allwinner,function = "uart1";
+			};
+
+			uart1_pins_cts_rts_a: uart1-cts-rts@0 {
+				allwinner,pins = "PG8", "PG9";
+				allwinner,function = "uart1";
+			};
+
 			mmc0_pins_a: mmc0@0 {
 				allwinner,pins = "PF0", "PF1", "PF2",
 						 "PF3", "PF4", "PF5";
@@ -414,24 +342,16 @@
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
-		};
 
-		ahb1_rst: reset@01c202c0 {
-			#reset-cells = <1>;
-			compatible = "allwinner,sun6i-a31-clock-reset";
-			reg = <0x01c202c0 0xc>;
-		};
-
-		apb1_rst: reset@01c202d0 {
-			#reset-cells = <1>;
-			compatible = "allwinner,sun6i-a31-clock-reset";
-			reg = <0x01c202d0 0x4>;
-		};
-
-		apb2_rst: reset@01c202d8 {
-			#reset-cells = <1>;
-			compatible = "allwinner,sun6i-a31-clock-reset";
-			reg = <0x01c202d8 0x4>;
+			lcd_rgb666_pins: lcd-rgb666@0 {
+				allwinner,pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7",
+						 "PD10", "PD11", "PD12", "PD13", "PD14", "PD15",
+			                         "PD18", "PD19", "PD20", "PD21", "PD22", "PD23",
+			                         "PD24", "PD25", "PD26", "PD27";
+				allwinner,function = "lcd0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
 		};
 
 		timer@01c20c00 {
@@ -469,8 +389,8 @@
 			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&apb2_gates 16>;
-			resets = <&apb2_rst 16>;
+			clocks = <&ccu CLK_BUS_UART0>;
+			resets = <&ccu RST_BUS_UART0>;
 			dmas = <&dma 6>, <&dma 6>;
 			dma-names = "rx", "tx";
 			status = "disabled";
@@ -482,8 +402,8 @@
 			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&apb2_gates 17>;
-			resets = <&apb2_rst 17>;
+			clocks = <&ccu CLK_BUS_UART1>;
+			resets = <&ccu RST_BUS_UART1>;
 			dmas = <&dma 7>, <&dma 7>;
 			dma-names = "rx", "tx";
 			status = "disabled";
@@ -495,8 +415,8 @@
 			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&apb2_gates 18>;
-			resets = <&apb2_rst 18>;
+			clocks = <&ccu CLK_BUS_UART2>;
+			resets = <&ccu RST_BUS_UART2>;
 			dmas = <&dma 8>, <&dma 8>;
 			dma-names = "rx", "tx";
 			status = "disabled";
@@ -508,8 +428,8 @@
 			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&apb2_gates 19>;
-			resets = <&apb2_rst 19>;
+			clocks = <&ccu CLK_BUS_UART3>;
+			resets = <&ccu RST_BUS_UART3>;
 			dmas = <&dma 9>, <&dma 9>;
 			dma-names = "rx", "tx";
 			status = "disabled";
@@ -521,8 +441,8 @@
 			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&apb2_gates 20>;
-			resets = <&apb2_rst 20>;
+			clocks = <&ccu CLK_BUS_UART4>;
+			resets = <&ccu RST_BUS_UART4>;
 			dmas = <&dma 10>, <&dma 10>;
 			dma-names = "rx", "tx";
 			status = "disabled";
@@ -532,8 +452,8 @@
 			compatible = "allwinner,sun6i-a31-i2c";
 			reg = <0x01c2ac00 0x400>;
 			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb2_gates 0>;
-			resets = <&apb2_rst 0>;
+			clocks = <&ccu CLK_BUS_I2C0>;
+			resets = <&ccu RST_BUS_I2C0>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -543,8 +463,8 @@
 			compatible = "allwinner,sun6i-a31-i2c";
 			reg = <0x01c2b000 0x400>;
 			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb2_gates 1>;
-			resets = <&apb2_rst 1>;
+			clocks = <&ccu CLK_BUS_I2C1>;
+			resets = <&ccu RST_BUS_I2C1>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -554,8 +474,8 @@
 			compatible = "allwinner,sun6i-a31-i2c";
 			reg = <0x01c2b400 0x400>;
 			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb2_gates 2>;
-			resets = <&apb2_rst 2>;
+			clocks = <&ccu CLK_BUS_I2C2>;
+			resets = <&ccu RST_BUS_I2C2>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/arch/arm/boot/dts/sun8i-a23-gt90h-v4.dts b/arch/arm/boot/dts/sun8i-a23-gt90h-v4.dts
index b2ce284..e3c7a25 100644
--- a/arch/arm/boot/dts/sun8i-a23-gt90h-v4.dts
+++ b/arch/arm/boot/dts/sun8i-a23-gt90h-v4.dts
@@ -42,70 +42,27 @@
 
 /dts-v1/;
 #include "sun8i-a23.dtsi"
-#include "sunxi-common-regulators.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
-#include <dt-bindings/pwm/pwm.h>
+#include "sun8i-reference-design-tablet.dtsi"
 
 / {
 	model = "Allwinner GT90H Dual Core Tablet (v4)";
 	compatible = "allwinner,gt90h-v4", "allwinner,sun8i-a23";
-
-	aliases {
-		serial0 = &r_uart;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pinctrl-names = "default";
-		pinctrl-0 = <&bl_en_pin_gt90h>;
-		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
-		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
-		default-brightness-level = <8>;
-		enable-gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
 };
 
 &ehci0 {
 	status = "okay";
 };
 
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
+&touchscreen {
+	reg = <0x40>;
+	compatible = "silead,gsl3675";
+	firmware-name = "gsl3675-gt90h.fw";
+	touchscreen-size-x = <1792>;
+	touchscreen-size-y = <1024>;
 	status = "okay";
 };
 
 &lradc {
-	vref-supply = <&reg_vcc3v0>;
-	status = "okay";
-
-	button@200 {
-		label = "Volume Up";
-		linux,code = <KEY_VOLUMEUP>;
-		channel = <0>;
-		voltage = <200000>;
-	};
-
-	button@400 {
-		label = "Volume Down";
-		linux,code = <KEY_VOLUMEDOWN>;
-		channel = <0>;
-		voltage = <400000>;
-	};
-
 	button@600 {
 		label = "Back";
 		linux,code = <KEY_BACK>;
@@ -114,144 +71,6 @@
 	};
 };
 
-&mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_gt90h>;
-	vmmc-supply = <&reg_aldo1>;
-	bus-width = <4>;
-	cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
-	cd-inverted;
-	status = "okay";
-};
-
-&pio {
-	bl_en_pin_gt90h: bl_en_pin@0 {
-		allwinner,pins = "PH6";
-		allwinner,function = "gpio_in";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-	};
-
-	mmc0_cd_pin_gt90h: mmc0_cd_pin@0 {
-		allwinner,pins = "PB4";
-		allwinner,function = "gpio_in";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-	};
-};
-
-&pwm {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pwm0_pins>;
-	status = "okay";
-};
-
-&r_rsb {
-	status = "okay";
-
-	axp22x: pmic@3a3 {
-		compatible = "x-powers,axp223";
-		reg = <0x3a3>;
-		interrupt-parent = <&nmi_intc>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-		eldoin-supply = <&reg_dcdc1>;
-	};
-};
-
-&r_uart {
-	pinctrl-names = "default";
-	pinctrl-0 = <&r_uart_pins_a>;
-	status = "okay";
-};
-
-#include "axp22x.dtsi"
-
-&reg_aldo1 {
-	regulator-always-on;
-	regulator-min-microvolt = <3000000>;
-	regulator-max-microvolt = <3000000>;
-	regulator-name = "vcc-io";
-};
-
-&reg_aldo2 {
-	regulator-always-on;
-	regulator-min-microvolt = <2350000>;
-	regulator-max-microvolt = <2650000>;
-	regulator-name = "vdd-dll";
-};
-
-&reg_aldo3 {
-	regulator-always-on;
-	regulator-min-microvolt = <2700000>;
-	regulator-max-microvolt = <3300000>;
-	regulator-name = "vcc-pll-avcc";
-};
-
-&reg_dc1sw {
-	regulator-name = "vcc-lcd";
-};
-
-&reg_dc5ldo {
-	regulator-always-on;
-	regulator-min-microvolt = <900000>;
-	regulator-max-microvolt = <1400000>;
-	regulator-name = "vdd-cpus";
-};
-
-&reg_dcdc1 {
-	regulator-always-on;
-	regulator-min-microvolt = <3000000>;
-	regulator-max-microvolt = <3000000>;
-	regulator-name = "vcc-3v0";
-};
-
-&reg_dcdc2 {
-	regulator-always-on;
-	regulator-min-microvolt = <900000>;
-	regulator-max-microvolt = <1400000>;
-	regulator-name = "vdd-sys";
-};
-
-&reg_dcdc3 {
-	regulator-always-on;
-	regulator-min-microvolt = <900000>;
-	regulator-max-microvolt = <1400000>;
-	regulator-name = "vdd-cpu";
-};
-
-&reg_dcdc5 {
-	regulator-always-on;
-	regulator-min-microvolt = <1500000>;
-	regulator-max-microvolt = <1500000>;
-	regulator-name = "vcc-dram";
-};
-
-&reg_dldo1 {
-	regulator-min-microvolt = <3300000>;
-	regulator-max-microvolt = <3300000>;
-	regulator-name = "vcc-wifi";
-};
-
-&reg_rtc_ldo {
-	regulator-name = "vcc-rtc";
-};
-
-&simplefb_lcd {
-	vcc-lcd-supply = <&reg_dc1sw>;
-};
-
-/*
- * FIXME for now we only support host mode and rely on u-boot to have
- * turned on Vbus which is controlled by the axp223 pmic on the board.
- *
- * Once we have axp223 support we should switch to fully supporting otg.
- */
-&usb_otg {
-	dr_mode = "host";
-	status = "okay";
-};
-
 &usbphy {
 	usb1_vbus-supply = <&reg_dldo1>;
-	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun8i-a23-inet86dz.dts b/arch/arm/boot/dts/sun8i-a23-inet86dz.dts
index 0f9f71b..d440575 100644
--- a/arch/arm/boot/dts/sun8i-a23-inet86dz.dts
+++ b/arch/arm/boot/dts/sun8i-a23-inet86dz.dts
@@ -53,6 +53,15 @@
 	status = "okay";
 };
 
+&touchscreen {
+	reg = <0x40>;
+	compatible = "silead,gsl1680";
+	firmware-name = "gsl1680-inet86dz.fw";
+	touchscreen-size-x = <960>;
+	touchscreen-size-y = <640>;
+	status = "okay";
+};
+
 &usbphy {
 	usb1_vbus-supply = <&reg_dldo1>;
 };
diff --git a/arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts b/arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts
index e300442..a86cbed 100644
--- a/arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts
+++ b/arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts
@@ -47,4 +47,72 @@
 / {
 	model = "Polaroid MID2407PXE03 tablet";
 	compatible = "polaroid,mid2407pxe03", "allwinner,sun8i-a23";
+
+	aliases {
+		ethernet0 = &esp8089;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_pwrseq_pin_mid2407>;
+		reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL6 */
+		/* The esp8089 needs 200 ms after driving wifi-en high */
+		post-power-on-delay-ms = <200>;
+	};
+};
+
+&i2c1 {
+	mma7660: accelerometer@4c {
+		reg = <0x4c>;
+		compatible = "fsl,mma7660";
+	};
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_a>;
+	vmmc-supply = <&reg_dldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	esp8089: sdio_wifi@1 {
+		compatible = "esp,esp8089";
+		reg = <1>;
+		esp,crystal-26M-en = <2>;
+	};
+};
+
+&mmc1_pins_a {
+	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+};
+
+&r_pio {
+	wifi_pwrseq_pin_mid2407: wifi_pwrseq_pin@0 {
+		allwinner,pins = "PL6";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_ldo_io1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-touchscreen";
+	status = "okay";
+};
+
+&touchscreen {
+	reg = <0x40>;
+	compatible = "silead,gsl1680";
+	firmware-name = "gsl1680-polaroid-mid2407pxe03.fw";
+	touchscreen-size-x = <960>;
+	touchscreen-size-y = <640>;
+	touchscreen-inverted-x;
+	touchscreen-inverted-y;
+	vddio-supply = <&reg_ldo_io1>;
+	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun8i-a23-polaroid-mid2809pxe04.dts b/arch/arm/boot/dts/sun8i-a23-polaroid-mid2809pxe04.dts
index 6d06e24..9955f85 100644
--- a/arch/arm/boot/dts/sun8i-a23-polaroid-mid2809pxe04.dts
+++ b/arch/arm/boot/dts/sun8i-a23-polaroid-mid2809pxe04.dts
@@ -47,4 +47,55 @@
 / {
 	model = "Polaroid MID2809PXE04 tablet";
 	compatible = "polaroid,mid2809pxe04", "allwinner,sun8i-a23";
+
+	aliases {
+		ethernet0 = &esp8089;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_pwrseq_pin_mid2809>;
+		reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL6 */
+		/* The esp8089 needs 200 ms after driving wifi-en high */
+		post-power-on-delay-ms = <200>;
+	};
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_a>;
+	vmmc-supply = <&reg_dldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	esp8089: sdio_wifi@1 {
+		compatible = "esp,esp8089";
+		reg = <1>;
+		esp,crystal-26M-en = <2>;
+	};
+};
+
+&mmc1_pins_a {
+	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+};
+
+&r_pio {
+	wifi_pwrseq_pin_mid2809: wifi_pwrseq_pin@0 {
+		allwinner,pins = "PL6";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&touchscreen {
+	reg = <0x40>;
+	compatible = "silead,gsl3670";
+	firmware-name = "gsl3670-polaroid-mid2809pxe04.fw";
+	touchscreen-size-x = <1660>;
+	touchscreen-size-y = <890>;
+	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun8i-a23.dtsi b/arch/arm/boot/dts/sun8i-a23.dtsi
index 92e6616..54d045d 100644
--- a/arch/arm/boot/dts/sun8i-a23.dtsi
+++ b/arch/arm/boot/dts/sun8i-a23.dtsi
@@ -48,74 +48,10 @@
 	memory {
 		reg = <0x40000000 0x40000000>;
 	};
+};
 
-	clocks {
-		ahb1_gates: clk@01c20060 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun8i-a23-ahb1-gates-clk";
-			reg = <0x01c20060 0x8>;
-			clocks = <&ahb1>;
-			clock-indices = <1>, <6>,
-					<8>, <9>, <10>,
-					<13>, <14>,
-					<19>, <20>,
-					<21>, <24>, <26>,
-					<29>, <32>, <36>,
-					<40>, <44>, <46>,
-					<52>, <53>,
-					<54>, <57>;
-			clock-output-names = "ahb1_mipidsi", "ahb1_dma",
-					"ahb1_mmc0", "ahb1_mmc1", "ahb1_mmc2",
-					"ahb1_nand", "ahb1_sdram",
-					"ahb1_hstimer", "ahb1_spi0",
-					"ahb1_spi1", "ahb1_otg", "ahb1_ehci",
-					"ahb1_ohci", "ahb1_ve", "ahb1_lcd",
-					"ahb1_csi", "ahb1_be",	"ahb1_fe",
-					"ahb1_gpu", "ahb1_msgbox",
-					"ahb1_spinlock", "ahb1_drc";
-		};
-
-		mbus_clk: clk@01c2015c {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun8i-a23-mbus-clk";
-			reg = <0x01c2015c 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5>;
-			clock-output-names = "mbus";
-		};
-	};
-
-	soc@01c00000 {
-		usb_otg: usb@01c19000 {
-			compatible = "allwinner,sun6i-a31-musb";
-			reg = <0x01c19000 0x0400>;
-			clocks = <&ahb1_gates 24>;
-			resets = <&ahb1_rst 24>;
-			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "mc";
-			phys = <&usbphy 0>;
-			phy-names = "usb";
-			extcon = <&usbphy 0>;
-			status = "disabled";
-		};
-
-		usbphy: phy@01c19400 {
-			compatible = "allwinner,sun8i-a23-usb-phy";
-			reg = <0x01c19400 0x10>,
-			      <0x01c1a800 0x4>;
-			reg-names = "phy_ctrl",
-				    "pmu1";
-			clocks = <&usb_clk 8>,
-				 <&usb_clk 9>;
-			clock-names = "usb0_phy",
-				      "usb1_phy";
-			resets = <&usb_clk 0>,
-				 <&usb_clk 1>;
-			reset-names = "usb0_reset",
-				      "usb1_reset";
-			status = "disabled";
-			#phy-cells = <1>;
-		};
-	};
+&ccu {
+	compatible = "allwinner,sun8i-a23-ccu";
 };
 
 &pio {
@@ -124,3 +60,13 @@
 		     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
 		     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 };
+
+&usb_otg {
+	compatible = "allwinner,sun6i-a31-musb";
+};
+
+&usbphy {
+	compatible = "allwinner,sun8i-a23-usb-phy";
+	reg = <0x01c19400 0x10>, <0x01c1a800 0x4>;
+	reg-names = "phy_ctrl", "pmu1";
+};
diff --git a/arch/arm/boot/dts/sun8i-a33-ga10h-v1.1.dts b/arch/arm/boot/dts/sun8i-a33-ga10h-v1.1.dts
index 6566032..f711599 100644
--- a/arch/arm/boot/dts/sun8i-a33-ga10h-v1.1.dts
+++ b/arch/arm/boot/dts/sun8i-a33-ga10h-v1.1.dts
@@ -47,12 +47,27 @@
 / {
 	model = "Allwinner GA10H Quad Core Tablet (v1.1)";
 	compatible = "allwinner,ga10h-v1.1", "allwinner,sun8i-a33";
+
+	aliases {
+		/* Make u-boot set mac-address for rtl8703as (no eeprom) */
+		ethernet0 = &rtl8703as;
+	};
 };
 
 &ehci0 {
 	status = "okay";
 };
 
+&touchscreen {
+	reg = <0x40>;
+	compatible = "silead,gsl3675";
+	firmware-name = "gsl3675-ga10h.fw";
+	touchscreen-size-x = <1630>;
+	touchscreen-size-y = <990>;
+	touchscreen-inverted-y;
+	status = "okay";
+};
+
 &lradc {
 	button@600 {
 		label = "Back";
@@ -62,6 +77,19 @@
 	};
 };
 
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_a>;
+	vmmc-supply = <&reg_dldo1>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	rtl8703as: sdio_wifi@1 {
+		reg = <1>;
+	};
+};
+
 &ohci0 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts b/arch/arm/boot/dts/sun8i-a33-inet-d978-rev2.dts
similarity index 64%
copy from arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts
copy to arch/arm/boot/dts/sun8i-a33-inet-d978-rev2.dts
index d594f40..fb46655 100644
--- a/arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts
+++ b/arch/arm/boot/dts/sun8i-a33-inet-d978-rev2.dts
@@ -1,7 +1,6 @@
 /*
- * Device Tree Source for UniPhier PH1-sLD8 Reference Board
- *
- * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ * Copyright 2016 Icenowy Zheng <icenowy@aosc.xyz>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -43,63 +42,67 @@
  */
 
 /dts-v1/;
-/include/ "uniphier-ph1-sld8.dtsi"
-/include/ "uniphier-ref-daughter.dtsi"
-/include/ "uniphier-support-card.dtsi"
+#include "sun8i-a33.dtsi"
+#include "sun8i-reference-design-tablet.dtsi"
 
 / {
-	model = "UniPhier PH1-sLD8 Reference Board";
-	compatible = "socionext,ph1-sld8-ref", "socionext,ph1-sld8";
+	model = "INet-D978 Rev 02";
+	compatible = "primux,inet-d978-rev2", "allwinner,sun8i-a33";
 
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x20000000>;
+	aliases {
+		serial0 = &uart1;
 	};
 
 	chosen {
-		stdout-path = "serial0:115200n8";
+		/* Delete debug UART as serial0 is the UART for bluetooth */
+		/delete-property/stdout-path;
 	};
 
-	aliases {
-		serial0 = &serial0;
-		serial1 = &serial1;
-		serial2 = &serial2;
-		serial3 = &serial3;
-		i2c0 = &i2c0;
-		i2c1 = &i2c1;
-		i2c2 = &i2c2;
-		i2c3 = &i2c3;
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pin_d978>;
+
+		home {
+			label = "d978:blue:home";
+			gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */
+		};
 	};
 };
 
-&ethsc {
-	interrupts = <0 48 4>;
+&mmc1_pins_a {
+	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 };
 
-&serial0 {
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_a>;
+	vmmc-supply = <&reg_dldo1>;
+	bus-width = <4>;
+	non-removable;
 	status = "okay";
+
+	rtl8723bs: sdio_wifi@1 {
+		reg = <1>;
+	};
 };
 
-&serial2 {
-	status = "okay";
+&r_pio {
+	led_pin_d978: led_pin_d978@0 {
+		allwinner,pins = "PL5";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
 };
 
-&serial3 {
-	status = "okay";
+&r_uart {
+	status = "disabled";
 };
 
-&i2c0 {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-};
-
-&usb1 {
-	status = "okay";
-};
-
-&usb2 {
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins_a>,
+		    <&uart1_pins_cts_rts_a>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun8i-a33-olinuxino.dts b/arch/arm/boot/dts/sun8i-a33-olinuxino.dts
new file mode 100644
index 0000000..9ea637e
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-a33-olinuxino.dts
@@ -0,0 +1,226 @@
+/*
+ * Copyright 2016 - Stefan Mavrodiev <stefan.mavrodiev@gmail.com>
+ *                  Olimex LTD. <support@olimex.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a33.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Olimex A33-OLinuXino";
+	compatible = "olimex,a33-olinuxino","allwinner,sun8i-a33";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pin_olinuxino>;
+
+		green {
+			label = "a33-olinuxino:green:usr";
+			gpios = <&pio 1 7 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pio {
+	led_pin_olinuxino: led_pins@0 {
+		allwinner,pins = "PB7";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	mmc0_cd_pin_olinuxino: mmc0_cd_pin@0 {
+		allwinner,pins = "PB4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PB3";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp22x: pmic@3a3 {
+		compatible = "x-powers,axp223";
+		reg = <0x3a3>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		eldoin-supply = <&reg_dcdc1>;
+		x-powers,drive-vbus-en;
+	};
+};
+
+#include "axp22x.dtsi"
+
+&reg_aldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-io";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <2350000>;
+	regulator-max-microvolt = <2650000>;
+	regulator-name = "vdd-dll";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-avcc";
+};
+
+&reg_dc1sw {
+	regulator-name = "vcc-lcd";
+};
+
+&reg_dc5ldo {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&simplefb_lcd {
+	vcc-lcd-supply = <&reg_dc1sw>;
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_b>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>;
+	usb0_id_det-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_drivevbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi
index 001d840..fd1e1cd 100644
--- a/arch/arm/boot/dts/sun8i-a33.dtsi
+++ b/arch/arm/boot/dts/sun8i-a33.dtsi
@@ -59,107 +59,179 @@
 		};
 	};
 
+	de: display-engine {
+		compatible = "allwinner,sun8i-a33-display-engine";
+		allwinner,pipelines = <&fe0>;
+		status = "disabled";
+	};
+
 	memory {
 		reg = <0x40000000 0x80000000>;
 	};
 
-	clocks {
-		/* Dummy clock for pll11 (DDR1) until actually implemented */
-		pll11: pll11_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <0>;
-			clock-output-names = "pll11";
-		};
-
-		ahb1_gates: clk@01c20060 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun8i-a33-ahb1-gates-clk";
-			reg = <0x01c20060 0x8>;
-			clocks = <&ahb1>;
-			clock-indices = <1>, <5>,
-				        <6>, <8>, <9>,
-				        <10>, <13>, <14>,
-					<19>, <20>,
-					<21>, <24>, <26>,
-					<29>, <32>, <36>,
-					<40>, <44>, <46>,
-					<52>, <53>,
-					<54>, <57>,
-					<58>;
-			clock-output-names = "ahb1_mipidsi", "ahb1_ss",
-					"ahb1_dma","ahb1_mmc0", "ahb1_mmc1",
-					"ahb1_mmc2", "ahb1_nand", "ahb1_sdram",
-					"ahb1_hstimer", "ahb1_spi0",
-					"ahb1_spi1", "ahb1_otg", "ahb1_ehci",
-					"ahb1_ohci", "ahb1_ve", "ahb1_lcd",
-					"ahb1_csi", "ahb1_be",	"ahb1_fe",
-					"ahb1_gpu", "ahb1_msgbox",
-					"ahb1_spinlock", "ahb1_drc",
-					"ahb1_sat";
-		};
-
-		ss_clk: clk@01c2009c {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c2009c 0x4>;
-			clocks = <&osc24M>, <&pll6 0>;
-			clock-output-names = "ss";
-		};
-
-		mbus_clk: clk@01c2015c {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun8i-a23-mbus-clk";
-			reg = <0x01c2015c 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5>, <&pll11>;
-			clock-output-names = "mbus";
-		};
-	};
-
 	soc@01c00000 {
+		tcon0: lcd-controller@01c0c000 {
+			compatible = "allwinner,sun8i-a33-tcon";
+			reg = <0x01c0c000 0x1000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_LCD>,
+				 <&ccu CLK_LCD_CH0>;
+			clock-names = "ahb",
+				      "tcon-ch0";
+			clock-output-names = "tcon-pixel-clock";
+			resets = <&ccu RST_BUS_LCD>;
+			reset-names = "lcd";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon0_in_drc0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&drc0_out_tcon0>;
+					};
+				};
+
+				tcon0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+			};
+		};
+
 		crypto: crypto-engine@01c15000 {
 			compatible = "allwinner,sun4i-a10-crypto";
 			reg = <0x01c15000 0x1000>;
 			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ahb1_gates 5>, <&ss_clk>;
+			clocks = <&ccu CLK_BUS_SS>, <&ccu CLK_SS>;
 			clock-names = "ahb", "mod";
-			resets = <&ahb1_rst 5>;
+			resets = <&ccu RST_BUS_SS>;
 			reset-names = "ahb";
 		};
 
-		usb_otg: usb@01c19000 {
-			compatible = "allwinner,sun8i-a33-musb";
-			reg = <0x01c19000 0x0400>;
-			clocks = <&ahb1_gates 24>;
-			resets = <&ahb1_rst 24>;
-			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "mc";
-			phys = <&usbphy 0>;
-			phy-names = "usb";
-			extcon = <&usbphy 0>;
+		fe0: display-frontend@01e00000 {
+			compatible = "allwinner,sun8i-a33-display-frontend";
+			reg = <0x01e00000 0x20000>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_DE_FE>, <&ccu CLK_DE_FE>,
+				 <&ccu CLK_DRAM_DE_FE>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_BUS_DE_FE>;
 			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fe0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					fe0_out_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_in_fe0>;
+					};
+				};
+			};
 		};
 
-		usbphy: phy@01c19400 {
-			compatible = "allwinner,sun8i-a33-usb-phy";
-			reg = <0x01c19400 0x14>,
-			      <0x01c1a800 0x4>;
-			reg-names = "phy_ctrl",
-				    "pmu1";
-			clocks = <&usb_clk 8>,
-				 <&usb_clk 9>;
-			clock-names = "usb0_phy",
-				      "usb1_phy";
-			resets = <&usb_clk 0>,
-				 <&usb_clk 1>;
-			reset-names = "usb0_reset",
-				      "usb1_reset";
-			status = "disabled";
-			#phy-cells = <1>;
+		be0: display-backend@01e60000 {
+			compatible = "allwinner,sun8i-a33-display-backend";
+			reg = <0x01e60000 0x10000>, <0x01e80000 0x1000>;
+			reg-names = "be", "sat";
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_DE_BE>, <&ccu CLK_DE_BE>,
+				 <&ccu CLK_DRAM_DE_BE>, <&ccu CLK_BUS_SAT>;
+			clock-names = "ahb", "mod",
+				      "ram", "sat";
+			resets = <&ccu RST_BUS_DE_BE>, <&ccu RST_BUS_SAT>;
+			reset-names = "be", "sat";
+			assigned-clocks = <&ccu CLK_DE_BE>;
+			assigned-clock-rates = <300000000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				be0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					be0_in_fe0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&fe0_out_be0>;
+					};
+				};
+
+				be0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					be0_out_drc0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&drc0_in_be0>;
+					};
+				};
+			};
+		};
+
+		drc0: drc@01e70000 {
+			compatible = "allwinner,sun8i-a33-drc";
+			reg = <0x01e70000 0x10000>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_DRC>, <&ccu CLK_DRC>,
+				 <&ccu CLK_DRAM_DRC>;
+			clock-names = "ahb", "mod", "ram";
+			resets = <&ccu RST_BUS_DRC>;
+
+			assigned-clocks = <&ccu CLK_DRC>;
+			assigned-clock-rates = <300000000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				drc0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					drc0_in_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_out_drc0>;
+					};
+				};
+
+				drc0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					drc0_out_tcon0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon0_in_drc0>;
+					};
+				};
+			};
 		};
 	};
 };
 
+&ccu {
+	compatible = "allwinner,sun8i-a33-ccu";
+};
+
 &pio {
 	compatible = "allwinner,sun8i-a33-pinctrl";
 	interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
@@ -173,3 +245,13 @@
 	};
 
 };
+
+&usb_otg {
+	compatible = "allwinner,sun8i-a33-musb";
+};
+
+&usbphy {
+	compatible = "allwinner,sun8i-a33-usb-phy";
+	reg = <0x01c19400 0x14>, <0x01c1a800 0x4>;
+	reg-names = "phy_ctrl", "pmu1";
+};
diff --git a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts
index f3b1d5f..06fddaa 100644
--- a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts
+++ b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts
@@ -185,7 +185,7 @@
 
 &uart1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins_a>;
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts
similarity index 61%
copy from arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts
copy to arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts
index d594f40..3d64caf 100644
--- a/arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts
@@ -1,7 +1,5 @@
 /*
- * Device Tree Source for UniPhier PH1-sLD8 Reference Board
- *
- * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2016 James Pettigrew <james@innovum.com.au>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -43,63 +41,85 @@
  */
 
 /dts-v1/;
-/include/ "uniphier-ph1-sld8.dtsi"
-/include/ "uniphier-ref-daughter.dtsi"
-/include/ "uniphier-support-card.dtsi"
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
-	model = "UniPhier PH1-sLD8 Reference Board";
-	compatible = "socionext,ph1-sld8-ref", "socionext,ph1-sld8";
+	model = "FriendlyARM NanoPi NEO";
+	compatible = "friendlyarm,nanopi-neo", "allwinner,sun8i-h3";
 
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x20000000>;
+	aliases {
+		serial0 = &uart0;
 	};
 
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
 
-	aliases {
-		serial0 = &serial0;
-		serial1 = &serial1;
-		serial2 = &serial2;
-		serial3 = &serial3;
-		i2c0 = &i2c0;
-		i2c1 = &i2c1;
-		i2c2 = &i2c2;
-		i2c3 = &i2c3;
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&leds_opc>, <&leds_r_opc>;
+
+		pwr {
+			label = "nanopi:green:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
+			default-state = "on";
+		};
+
+		status {
+			label = "nanopi:blue:status";
+			gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; /* PA10 */
+		};
 	};
 };
 
-&ethsc {
-	interrupts = <0 48 4>;
-};
-
-&serial0 {
+&ehci3 {
 	status = "okay";
 };
 
-&serial2 {
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
+	cd-inverted;
 	status = "okay";
 };
 
-&serial3 {
+&ohci3 {
 	status = "okay";
 };
 
-&i2c0 {
+&pio {
+	leds_opc: led-pins {
+		allwinner,pins = "PA10";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&r_pio {
+	leds_r_opc: led-pins {
+		allwinner,pins = "PL10";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
 	status = "okay";
 };
 
-&usb0 {
-	status = "okay";
-};
-
-&usb1 {
-	status = "okay";
-};
-
-&usb2 {
+&usbphy {
+	/* USB VBUS is always on */
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts
index f93f5d1..e5bcaba 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts
@@ -54,6 +54,8 @@
 
 	aliases {
 		serial0 = &uart0;
+		/* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */
+		ethernet1 = &rtl8189;
 	};
 
 	chosen {
@@ -131,6 +133,14 @@
 	bus-width = <4>;
 	non-removable;
 	status = "okay";
+
+	/*
+	 * Explicitly define the sdio device, so that we can add an ethernet
+	 * alias for it (which e.g. makes u-boot set a mac-address).
+	 */
+	rtl8189: sdio_wifi@1 {
+		reg = <1>;
+	};
 };
 
 &pio {
@@ -176,6 +186,24 @@
 	status = "okay";
 };
 
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "disabled";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	status = "disabled";
+};
+
 &usb1_vbus_pin_a {
 	allwinner,pins = "PG13";
 };
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts
new file mode 100644
index 0000000..1550fee
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts
@@ -0,0 +1,178 @@
+/*
+ * Copyright (C) 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Xunlong Orange Pi Lite";
+	compatible = "xunlong,orangepi-lite", "allwinner,sun8i-h3";
+
+	aliases {
+		/* The H3 emac is not used so the wifi is ethernet0 */
+		ethernet0 = &rtl8189ftv;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&leds_opc>, <&leds_r_opc>;
+
+		pwr_led {
+			label = "orangepi:green:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		status_led {
+			label = "orangepi:red:status";
+			gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	r_gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&sw_r_opc>;
+
+		sw4 {
+			label = "sw4";
+			linux,code = <BTN_0>;
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
+	cd-inverted;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_a>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	/*
+	 * Explicitly define the sdio device, so that we can add an ethernet
+	 * alias for it (which e.g. makes u-boot set a mac-address).
+	 */
+	rtl8189ftv: sdio_wifi@1 {
+		reg = <1>;
+	};
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&pio {
+	leds_opc: led_pins@0 {
+		allwinner,pins = "PA15";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&r_pio {
+	leds_r_opc: led_pins@0 {
+		allwinner,pins = "PL10";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	sw_r_opc: key_pins@0 {
+		allwinner,pins = "PL3";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	/* USB VBUS is always on */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
index 0adf932..5c9b5bf 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
@@ -139,6 +139,24 @@
 	status = "okay";
 };
 
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "disabled";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	status = "disabled";
+};
+
 &usbphy {
 	/* USB VBUS is always on */
 	status = "okay";
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20-ref.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts
similarity index 66%
copy from arch/arm64/boot/dts/socionext/uniphier-ph1-ld20-ref.dts
copy to arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts
index 2adad8c..851fd2c 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20-ref.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts
@@ -1,7 +1,5 @@
 /*
- * Device Tree Source for UniPhier PH1-LD20 Reference Board
- *
- * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2016 Hans de Goede <hdegoede@redhat.com>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -42,46 +40,49 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-/dts-v1/;
-/include/ "uniphier-ph1-ld20.dtsi"
-/include/ "uniphier-ref-daughter.dtsi"
-/include/ "uniphier-support-card.dtsi"
+/* The Orange Pi PC Plus is an extended version of the regular PC */
+#include "sun8i-h3-orangepi-pc.dts"
 
 / {
-	model = "UniPhier PH1-LD20 Reference Board";
-	compatible = "socionext,ph1-ld20-ref", "socionext,ph1-ld20";
-
-	memory {
-		device_type = "memory";
-		reg = <0 0x80000000 0 0xc0000000>;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
+	model = "Xunlong Orange Pi PC Plus";
+	compatible = "xunlong,orangepi-pc-plus", "allwinner,sun8i-h3";
 
 	aliases {
-		serial0 = &serial0;
-		serial1 = &serial1;
-		serial2 = &serial2;
-		serial3 = &serial3;
-		i2c0 = &i2c0;
-		i2c1 = &i2c1;
-		i2c2 = &i2c2;
-		i2c3 = &i2c3;
-		i2c4 = &i2c4;
-		i2c5 = &i2c5;
+		/* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */
+		ethernet1 = &rtl8189ftv;
 	};
 };
 
-&ethsc {
-	interrupts = <0 48 4>;
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_a>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	/*
+	 * Explicitly define the sdio device, so that we can add an ethernet
+	 * alias for it (which e.g. makes u-boot set a mac-address).
+	 */
+	rtl8189ftv: sdio_wifi@1 {
+		reg = <1>;
+	};
 };
 
-&serial0 {
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
 	status = "okay";
 };
 
-&i2c0 {
-	status = "okay";
+&mmc2_8bit_pins {
+	/* Increase drive strength for DDR modes */
+	allwinner,drive = <SUN4I_PINCTRL_40_MA>;
+	/* eMMC is missing pull-ups */
+	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 };
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
index daf50b9a6..3ec9712 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
@@ -161,6 +161,24 @@
 	status = "okay";
 };
 
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "disabled";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	status = "disabled";
+};
+
 &usbphy {
 	/* USB VBUS is always on */
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
index b0cb417..bb58591 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
@@ -44,7 +44,7 @@
 #include "sun8i-h3-orangepi-2.dts"
 
 / {
-	model = "Xunlong Orange Pi Plus";
+	model = "Xunlong Orange Pi Plus / Plus 2";
 	compatible = "xunlong,orangepi-plus", "allwinner,sun8i-h3";
 
 	reg_usb3_vbus: usb3-vbus {
diff --git a/arch/arm/boot/dts/uniphier-proxstream2-vodka.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts
similarity index 75%
copy from arch/arm/boot/dts/uniphier-proxstream2-vodka.dts
copy to arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts
index 1fb8bd7..5851a47 100644
--- a/arch/arm/boot/dts/uniphier-proxstream2-vodka.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts
@@ -1,7 +1,5 @@
 /*
- * Device Tree Source for UniPhier ProXstream2 Vodka Board
- *
- * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2016 Hans de Goede <hdegoede@redhat.com>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -42,37 +40,14 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-/dts-v1/;
-/include/ "uniphier-proxstream2.dtsi"
+/*
+ * The Orange Pi Plus 2E is an extended version of the Orange Pi PC Plus,
+ * with 2G RAM and an external gbit ethernet phy.
+ */
+
+#include "sun8i-h3-orangepi-pc-plus.dts"
 
 / {
-	model = "UniPhier ProXstream2 Vodka Board";
-	compatible = "socionext,proxstream2-vodka", "socionext,proxstream2";
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x80000000>;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	aliases {
-		serial0 = &serial2;
-		serial1 = &serial0;
-		serial2 = &serial1;
-		i2c0 = &i2c0;
-		i2c4 = &i2c4;
-		i2c5 = &i2c5;
-		i2c6 = &i2c6;
-	};
-};
-
-&serial2 {
-	status = "okay";
-};
-
-&i2c0 {
-	status = "okay";
+	model = "Xunlong Orange Pi Plus 2E";
+	compatible = "xunlong,orangepi-plus2e", "allwinner,sun8i-h3";
 };
diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
index 8a95e36..75a8654 100644
--- a/arch/arm/boot/dts/sun8i-h3.dtsi
+++ b/arch/arm/boot/dts/sun8i-h3.dtsi
@@ -327,6 +327,27 @@
 			interrupt-controller;
 			#interrupt-cells = <3>;
 
+			i2c0_pins: i2c0 {
+				allwinner,pins = "PA11", "PA12";
+				allwinner,function = "i2c0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			i2c1_pins: i2c1 {
+				allwinner,pins = "PA18", "PA19";
+				allwinner,function = "i2c1";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			i2c2_pins: i2c2 {
+				allwinner,pins = "PE12", "PE13";
+				allwinner,function = "i2c2";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
 			mmc0_pins_a: mmc0@0 {
 				allwinner,pins = "PF0", "PF1", "PF2", "PF3",
 						 "PF4", "PF5";
@@ -367,12 +388,33 @@
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			uart1_pins_a: uart1@0 {
-				allwinner,pins = "PG6", "PG7", "PG8", "PG9";
+			uart1_pins: uart1 {
+				allwinner,pins = "PG6", "PG7";
 				allwinner,function = "uart1";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
+
+			uart1_rts_cts_pins: uart1_rts_cts {
+				allwinner,pins = "PG8", "PG9";
+				allwinner,function = "uart1";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			uart2_pins: uart2 {
+				allwinner,pins = "PA0", "PA1";
+				allwinner,function = "uart2";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			uart3_pins: uart3 {
+				allwinner,pins = "PG13", "PG14";
+				allwinner,function = "uart3";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
 		};
 
 		timer@01c20c00 {
@@ -389,6 +431,14 @@
 			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		pwm: pwm@01c21400 {
+			compatible = "allwinner,sun8i-h3-pwm";
+			reg = <0x01c21400 0x8>;
+			clocks = <&osc24M>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
 		uart0: serial@01c28000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28000 0x400>;
@@ -441,6 +491,45 @@
 			status = "disabled";
 		};
 
+		i2c0: i2c@01c2ac00 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2ac00 0x400>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C0>;
+			resets = <&ccu RST_BUS_I2C0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@01c2b000 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C1>;
+			resets = <&ccu RST_BUS_I2C1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@01c2b400 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C2>;
+			resets = <&ccu RST_BUS_I2C2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
 		gic: interrupt-controller@01c81000 {
 			compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
 			reg = <0x01c81000 0x1000>,
diff --git a/arch/arm/boot/dts/sun8i-q8-common.dtsi b/arch/arm/boot/dts/sun8i-q8-common.dtsi
index 60fa958..29f837a 100644
--- a/arch/arm/boot/dts/sun8i-q8-common.dtsi
+++ b/arch/arm/boot/dts/sun8i-q8-common.dtsi
@@ -42,10 +42,59 @@
 #include "sunxi-reference-design-tablet.dtsi"
 #include "sun8i-reference-design-tablet.dtsi"
 
+/ {
+	aliases {
+		serial0 = &r_uart;
+		/* Make u-boot set mac-address for wifi without an eeprom */
+		ethernet0 = &sdio_wifi;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		/*
+		 * Q8 boards use various PL# pins as wifi-en. On other boards
+		 * these may be connected to a wifi module output pin. To avoid
+		 * short-circuits we configure these as inputs with pull-ups via
+		 * pinctrl, instead of listing them as active-low reset-gpios.
+		 */
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_pwrseq_pin_q8>;
+		/* The esp8089 needs 200 ms after driving wifi-en high */
+		post-power-on-delay-ms = <200>;
+	};
+};
+
 &ehci0 {
 	status  = "okay";
 };
 
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_a>;
+	vmmc-supply = <&reg_dldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	sdio_wifi: sdio_wifi@1 {
+		reg = <1>;
+	};
+};
+
+&mmc1_pins_a {
+	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+};
+
+&r_pio {
+	wifi_pwrseq_pin_q8: wifi_pwrseq_pin@0 {
+		allwinner,pins = "PL6", "PL7", "PL11";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+};
+
 &usbphy {
 	usb1_vbus-supply = <&reg_dldo1>;
 };
diff --git a/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi
index 9d90361..08cd001 100644
--- a/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi
+++ b/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi
@@ -63,6 +63,25 @@
 	};
 };
 
+&i2c0 {
+	/*
+	 * The gsl1680 is rated at 400KHz and it will not work reliable at
+	 * 100KHz, this has been confirmed on multiple different q8 tablets.
+	 * The gsl1680 is the only device on this bus.
+	 */
+	clock-frequency = <400000>;
+
+	touchscreen: touchscreen@0 {
+		interrupt-parent = <&pio>;
+		interrupts = <1 5 IRQ_TYPE_EDGE_FALLING>; /* PB5 */
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_power_pin>;
+		power-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+		/* Tablet dts must provide reg and compatible */
+		status = "disabled";
+	};
+};
+
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
@@ -88,6 +107,13 @@
 		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 	};
 
+	ts_power_pin: ts_power_pin@0 {
+		allwinner,pins = "PH1";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
 	usb0_id_detect_pin: usb0_id_detect_pin@0 {
 		allwinner,pins = "PH8";
 		allwinner,function = "gpio_in";
diff --git a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
index 1526b41..439847a 100644
--- a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
+++ b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
@@ -103,6 +103,11 @@
 	allwinner,drive = <SUN4I_PINCTRL_40_MA>;
 };
 
+&osc32k {
+	/* osc32k input is from AC100 */
+	clocks = <&ac100_rtc 0>;
+};
+
 &pio {
 	led_pins_cubieboard4: led-pins@0 {
 		allwinner,pins = "PH6", "PH17";
@@ -248,6 +253,146 @@
 			reg_rtc_ldo: rtc_ldo {
 				regulator-name = "vcc-rtc-vdd1v8-io";
 			};
+
+			sw {
+				/* unused */
+			};
+		};
+	};
+
+	axp806: pmic@745 {
+		compatible = "x-powers,axp806";
+		reg = <0x745>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		bldoin-supply = <&reg_dcdce>;
+
+		regulators {
+			reg_s_aldo1: aldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "avcc";
+			};
+
+			aldo2 {
+				/*
+				 * unused, but use a different name to
+				 * avoid name clash with axp809's aldo's
+				 */
+				regulator-name = "s_aldo2";
+			};
+
+			aldo3 {
+				/*
+				 * unused, but use a different name to
+				 * avoid name clash with axp809's aldo's
+				 */
+				regulator-name = "s_aldo3";
+			};
+
+			reg_bldo1: bldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <1900000>;
+				regulator-name = "vcc18-efuse-adc-display-csi";
+			};
+
+			reg_bldo2: bldo2 {
+				regulator-always-on;
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <1900000>;
+				regulator-name =
+					"vdd18-drampll-vcc18-pll-cpvdd";
+			};
+
+			bldo3 {
+				/* unused */
+			};
+
+			reg_bldo4: bldo4 {
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-name = "vcc12-hsic";
+			};
+
+			reg_cldo1: cldo1 {
+				/*
+				 * This was 3V in the original design, but
+				 * 3.3V is the recommended supply voltage
+				 * for the Ethernet PHY.
+				 */
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-gmac-phy";
+			};
+
+			reg_cldo2: cldo2 {
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-name = "afvcc-cam";
+			};
+
+			reg_cldo3: cldo3 {
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc-io-wifi-codec-io2";
+			};
+
+			reg_dcdca: dcdca {
+				regulator-always-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-cpub";
+			};
+
+			reg_dcdcd: dcdcd {
+				regulator-always-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-vpu";
+			};
+
+			reg_dcdce: dcdce {
+				regulator-always-on;
+				regulator-min-microvolt = <2100000>;
+				regulator-max-microvolt = <2100000>;
+				regulator-name = "vcc-bldo-codec-ldoin";
+			};
+
+			sw {
+				/*
+				 * unused, but use a different name to
+				 * avoid name clash with axp809's sw
+				 */
+				regulator-name = "s_sw";
+			};
+		};
+	};
+
+	ac100: codec@e89 {
+		compatible = "x-powers,ac100";
+		reg = <0xe89>;
+
+		ac100_codec: codec {
+			compatible = "x-powers,ac100-codec";
+			interrupt-parent = <&r_pio>;
+			interrupts = <0 9 IRQ_TYPE_LEVEL_LOW>; /* PL9 */
+			#clock-cells = <0>;
+			clock-output-names = "4M_adda";
+		};
+
+		ac100_rtc: rtc {
+			compatible = "x-powers,ac100-rtc";
+			interrupt-parent = <&nmi_intc>;
+			interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&ac100_codec>;
+			#clock-cells = <1>;
+			clock-output-names = "cko1_rtc",
+					     "cko2_rtc",
+					     "cko3_rtc";
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts
index 7fd22e8..ceb6ef1 100644
--- a/arch/arm/boot/dts/sun9i-a80-optimus.dts
+++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts
@@ -112,7 +112,8 @@
 };
 
 &ehci1 {
-	status = "okay";
+	/* Enable if HSIC peripheral is connected */
+	status = "disabled";
 };
 
 &ehci2 {
@@ -152,6 +153,11 @@
 	status = "okay";
 };
 
+&osc32k {
+	/* osc32k input is from AC100 */
+	clocks = <&ac100_rtc 0>;
+};
+
 &pio {
 	led_pins_optimus: led-pins@0 {
 		allwinner,pins = "PH0", "PH1";
@@ -320,6 +326,146 @@
 			reg_rtc_ldo: rtc_ldo {
 				regulator-name = "vcc-rtc-vdd1v8-io";
 			};
+
+			sw {
+				/* unused */
+			};
+		};
+	};
+
+	axp806: pmic@745 {
+		compatible = "x-powers,axp806";
+		reg = <0x745>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		bldoin-supply = <&reg_dcdce>;
+
+		regulators {
+			reg_s_aldo1: aldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "avcc";
+			};
+
+			aldo2 {
+				/*
+				 * unused, but use a different name to
+				 * avoid name clash with axp809's aldo's
+				 */
+				regulator-name = "s_aldo2";
+			};
+
+			aldo3 {
+				/*
+				 * unused, but use a different name to
+				 * avoid name clash with axp809's aldo's
+				 */
+				regulator-name = "s_aldo3";
+			};
+
+			reg_bldo1: bldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <1900000>;
+				regulator-name = "vcc18-efuse-adc-display-csi";
+			};
+
+			reg_bldo2: bldo2 {
+				regulator-always-on;
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <1900000>;
+				regulator-name =
+					"vdd18-drampll-vcc18-pll-cpvdd";
+			};
+
+			bldo3 {
+				/* unused */
+			};
+
+			reg_bldo4: bldo4 {
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-name = "vcc12-hsic";
+			};
+
+			reg_cldo1: cldo1 {
+				/*
+				 * This was 3V in the original design, but
+				 * 3.3V is the recommended supply voltage
+				 * for the Ethernet PHY.
+				 */
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-gmac-phy";
+			};
+
+			reg_cldo2: cldo2 {
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-name = "afvcc-cam";
+			};
+
+			reg_cldo3: cldo3 {
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc-io-wifi-codec-io2";
+			};
+
+			reg_dcdca: dcdca {
+				regulator-always-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-cpub";
+			};
+
+			reg_dcdcd: dcdcd {
+				regulator-always-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-vpu";
+			};
+
+			reg_dcdce: dcdce {
+				regulator-always-on;
+				regulator-min-microvolt = <2100000>;
+				regulator-max-microvolt = <2100000>;
+				regulator-name = "vcc-bldo-codec-ldoin";
+			};
+
+			sw {
+				/*
+				 * unused, but use a different name to
+				 * avoid name clash with axp809's sw
+				 */
+				regulator-name = "s_sw";
+			};
+		};
+	};
+
+	ac100: codec@e89 {
+		compatible = "x-powers,ac100";
+		reg = <0xe89>;
+
+		ac100_codec: codec {
+			compatible = "x-powers,ac100-codec";
+			interrupt-parent = <&r_pio>;
+			interrupts = <0 9 IRQ_TYPE_LEVEL_LOW>; /* PL9 */
+			#clock-cells = <0>;
+			clock-output-names = "4M_adda";
+		};
+
+		ac100_rtc: rtc {
+			compatible = "x-powers,ac100-rtc";
+			interrupt-parent = <&nmi_intc>;
+			interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&ac100_codec>;
+			#clock-cells = <1>;
+			clock-output-names = "cko1_rtc",
+					     "cko2_rtc",
+					     "cko3_rtc";
 		};
 	};
 };
@@ -338,7 +484,9 @@
 };
 
 &usbphy2 {
-	status = "okay";
+	phy-supply = <&reg_bldo4>;
+	/* Enable if HSIC peripheral is connected */
+	status = "disabled";
 };
 
 &usbphy3 {
diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi
index f68b324..3c5214c 100644
--- a/arch/arm/boot/dts/sun9i-a80.dtsi
+++ b/arch/arm/boot/dts/sun9i-a80.dtsi
@@ -148,15 +148,14 @@
 
 		/*
 		 * The 32k clock is from an external source, normally the
-		 * AC100 codec/RTC chip. This clock is by default enabled
-		 * and clocked at 32768 Hz, from the oscillator connected
-		 * to the AC100. It is configurable, but no such driver or
-		 * bindings exist yet.
+		 * AC100 codec/RTC chip. This serves as a placeholder for
+		 * board dts files to specify the source.
 		 */
 		osc32k: osc32k_clk {
 			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <32768>;
+			compatible = "fixed-factor-clock";
+			clock-div = <1>;
+			clock-mult = <1>;
 			clock-output-names = "osc32k";
 		};
 
@@ -899,8 +898,7 @@
 			resets = <&apbs_rst 0>;
 			gpio-controller;
 			interrupt-controller;
-			#address-cells = <1>;
-			#size-cells = <0>;
+			#interrupt-cells = <3>;
 			#gpio-cells = <3>;
 
 			r_ir_pins: r_ir {
diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi
index cb9393a..8932ea3 100644
--- a/arch/arm/boot/dts/tegra114.dtsi
+++ b/arch/arm/boot/dts/tegra114.dtsi
@@ -672,7 +672,7 @@
 	};
 
 	usb@7d000000 {
-		compatible = "nvidia,tegra30-ehci", "usb-ehci";
+		compatible = "nvidia,tegra114-ehci", "nvidia,tegra30-ehci", "usb-ehci";
 		reg = <0x7d000000 0x4000>;
 		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 		phy_type = "utmi";
@@ -684,7 +684,7 @@
 	};
 
 	phy1: usb-phy@7d000000 {
-		compatible = "nvidia,tegra30-usb-phy";
+		compatible = "nvidia,tegra114-usb-phy", "nvidia,tegra30-usb-phy";
 		reg = <0x7d000000 0x4000 0x7d000000 0x4000>;
 		phy_type = "utmi";
 		clocks = <&tegra_car TEGRA114_CLK_USBD>,
@@ -708,7 +708,7 @@
 	};
 
 	usb@7d008000 {
-		compatible = "nvidia,tegra30-ehci", "usb-ehci";
+		compatible = "nvidia,tegra114-ehci", "nvidia,tegra30-ehci", "usb-ehci";
 		reg = <0x7d008000 0x4000>;
 		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 		phy_type = "utmi";
@@ -720,7 +720,7 @@
 	};
 
 	phy3: usb-phy@7d008000 {
-		compatible = "nvidia,tegra30-usb-phy";
+		compatible = "nvidia,tegra114-usb-phy", "nvidia,tegra30-usb-phy";
 		reg = <0x7d008000 0x4000 0x7d000000 0x4000>;
 		phy_type = "utmi";
 		clocks = <&tegra_car TEGRA114_CLK_USB3>,
diff --git a/arch/arm/boot/dts/uniphier-common32.dtsi b/arch/arm/boot/dts/uniphier-common32.dtsi
index 03f60ec..8c8a851 100644
--- a/arch/arm/boot/dts/uniphier-common32.dtsi
+++ b/arch/arm/boot/dts/uniphier-common32.dtsi
@@ -1,7 +1,8 @@
 /*
  * Device Tree Source commonly used by UniPhier ARM SoCs
  *
- * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -45,6 +46,11 @@
 /include/ "skeleton.dtsi"
 
 / {
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
 	clocks {
 		refclk: ref {
 			#clock-cells = <0>;
@@ -66,7 +72,7 @@
 			interrupts = <0 33 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart0>;
-			clocks = <&uart_clk>;
+			clocks = <&peri_clk 0>;
 		};
 
 		serial1: serial@54006900 {
@@ -76,7 +82,7 @@
 			interrupts = <0 35 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart1>;
-			clocks = <&uart_clk>;
+			clocks = <&peri_clk 1>;
 		};
 
 		serial2: serial@54006a00 {
@@ -86,7 +92,7 @@
 			interrupts = <0 37 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart2>;
-			clocks = <&uart_clk>;
+			clocks = <&peri_clk 2>;
 		};
 
 		serial3: serial@54006b00 {
@@ -96,7 +102,7 @@
 			interrupts = <0 177 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart3>;
-			clocks = <&uart_clk>;
+			clocks = <&peri_clk 3>;
 		};
 
 		system_bus: system-bus@58c00000 {
@@ -114,6 +120,34 @@
 			reg = <0x59801000 0x400>;
 		};
 
+		mioctrl@59810000 {
+			compatible = "socionext,uniphier-mioctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59810000 0x800>;
+
+			mio_clk: clock {
+				#clock-cells = <1>;
+			};
+
+			mio_rst: reset {
+				#reset-cells = <1>;
+			};
+		};
+
+		perictrl@59820000 {
+			compatible = "socionext,uniphier-perictrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59820000 0x200>;
+
+			peri_clk: clock {
+				#clock-cells = <1>;
+			};
+
+			peri_rst: reset {
+				#reset-cells = <1>;
+			};
+		};
+
 		timer@60000200 {
 			compatible = "arm,cortex-a9-global-timer";
 			reg = <0x60000200 0x20>;
@@ -137,11 +171,26 @@
 		};
 
 		soc-glue@5f800000 {
-			compatible = "simple-mfd", "syscon";
+			compatible = "socionext,uniphier-soc-glue",
+				     "simple-mfd", "syscon";
 			reg = <0x5f800000 0x2000>;
 
 			pinctrl: pinctrl {
-				 /* specify compatible in each SoC DTSI */
+				/* specify compatible in each SoC DTSI */
+			};
+		};
+
+		sysctrl@61840000 {
+			compatible = "socionext,uniphier-sysctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x61840000 0x4000>;
+
+			sys_clk: clock {
+				#clock-cells = <1>;
+			};
+
+			sys_rst: reset {
+				#reset-cells = <1>;
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts b/arch/arm/boot/dts/uniphier-ld4-ref.dts
similarity index 89%
rename from arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts
rename to arch/arm/boot/dts/uniphier-ld4-ref.dts
index ec94b7a..110031b 100644
--- a/arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts
+++ b/arch/arm/boot/dts/uniphier-ld4-ref.dts
@@ -1,7 +1,8 @@
 /*
- * Device Tree Source for UniPhier PH1-LD4 Reference Board
+ * Device Tree Source for UniPhier LD4 Reference Board
  *
- * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -43,13 +44,13 @@
  */
 
 /dts-v1/;
-/include/ "uniphier-ph1-ld4.dtsi"
+/include/ "uniphier-ld4.dtsi"
 /include/ "uniphier-ref-daughter.dtsi"
 /include/ "uniphier-support-card.dtsi"
 
 / {
-	model = "UniPhier PH1-LD4 Reference Board";
-	compatible = "socionext,ph1-ld4-ref", "socionext,ph1-ld4";
+	model = "UniPhier LD4 Reference Board";
+	compatible = "socionext,uniphier-ld4-ref", "socionext,uniphier-ld4";
 
 	memory {
 		device_type = "memory";
diff --git a/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi b/arch/arm/boot/dts/uniphier-ld4.dtsi
similarity index 80%
rename from arch/arm/boot/dts/uniphier-ph1-ld4.dtsi
rename to arch/arm/boot/dts/uniphier-ld4.dtsi
index debad7f..95f342c 100644
--- a/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi
+++ b/arch/arm/boot/dts/uniphier-ld4.dtsi
@@ -1,7 +1,8 @@
 /*
- * Device Tree Source for UniPhier PH1-LD4 SoC
+ * Device Tree Source for UniPhier LD4 SoC
  *
- * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -45,7 +46,7 @@
 /include/ "uniphier-common32.dtsi"
 
 / {
-	compatible = "socionext,ph1-ld4";
+	compatible = "socionext,uniphier-ld4";
 
 	cpus {
 		#address-cells = <1>;
@@ -55,6 +56,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0>;
+			enable-method = "psci";
 			next-level-cache = <&l2>;
 		};
 	};
@@ -65,18 +67,6 @@
 			compatible = "fixed-clock";
 			clock-frequency = <50000000>;
 		};
-
-		uart_clk: uart_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <36864000>;
-		};
-
-		iobus_clk: iobus_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <100000000>;
-		};
 	};
 };
 
@@ -101,7 +91,7 @@
 		interrupts = <0 41 1>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c0>;
-		clocks = <&iobus_clk>;
+		clocks = <&peri_clk 4>;
 		clock-frequency = <100000>;
 	};
 
@@ -114,7 +104,7 @@
 		interrupts = <0 42 1>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c1>;
-		clocks = <&iobus_clk>;
+		clocks = <&peri_clk 5>;
 		clock-frequency = <100000>;
 	};
 
@@ -127,7 +117,7 @@
 		interrupts = <0 43 1>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c2>;
-		clocks = <&iobus_clk>;
+		clocks = <&peri_clk 6>;
 		clock-frequency = <400000>;
 	};
 
@@ -140,7 +130,7 @@
 		interrupts = <0 44 1>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c3>;
-		clocks = <&iobus_clk>;
+		clocks = <&peri_clk 7>;
 		clock-frequency = <100000>;
 	};
 
@@ -151,6 +141,8 @@
 		interrupts = <0 80 4>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_usb0>;
+		clocks = <&mio_clk 7>, <&mio_clk 8>, <&mio_clk 12>;
+		resets = <&mio_rst 7>, <&mio_rst 8>, <&mio_rst 12>, <&sys_rst 8>;
 	};
 
 	usb1: usb@5a810100 {
@@ -160,6 +152,8 @@
 		interrupts = <0 81 4>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_usb1>;
+		clocks = <&mio_clk 7>, <&mio_clk 9>, <&mio_clk 13>;
+		resets = <&mio_rst 7>, <&mio_rst 9>, <&mio_rst 13>, <&sys_rst 8>;
 	};
 
 	usb2: usb@5a820100 {
@@ -169,6 +163,8 @@
 		interrupts = <0 82 4>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_usb2>;
+		clocks = <&mio_clk 7>, <&mio_clk 10>, <&mio_clk 14>;
+		resets = <&mio_rst 7>, <&mio_rst 10>, <&mio_rst 14>, <&sys_rst 8>;
 	};
 
 };
@@ -181,6 +177,31 @@
 	interrupts = <0 29 4>;
 };
 
+&mio_clk {
+	compatible = "socionext,uniphier-ld4-mio-clock";
+};
+
+&mio_rst {
+	compatible = "socionext,uniphier-ld4-mio-reset";
+	resets = <&sys_rst 7>;
+};
+
+&peri_clk {
+	compatible = "socionext,uniphier-ld4-peri-clock";
+};
+
+&peri_rst {
+	compatible = "socionext,uniphier-ld4-peri-reset";
+};
+
 &pinctrl {
 	compatible = "socionext,uniphier-ld4-pinctrl";
 };
+
+&sys_clk {
+	compatible = "socionext,uniphier-ld4-clock";
+};
+
+&sys_rst {
+	compatible = "socionext,uniphier-ld4-reset";
+};
diff --git a/arch/arm/boot/dts/uniphier-ph1-ld6b-ref.dts b/arch/arm/boot/dts/uniphier-ld6b-ref.dts
similarity index 89%
rename from arch/arm/boot/dts/uniphier-ph1-ld6b-ref.dts
rename to arch/arm/boot/dts/uniphier-ld6b-ref.dts
index b8134c6..c05d631 100644
--- a/arch/arm/boot/dts/uniphier-ph1-ld6b-ref.dts
+++ b/arch/arm/boot/dts/uniphier-ld6b-ref.dts
@@ -1,7 +1,8 @@
 /*
- * Device Tree Source for UniPhier PH1-LD6b Reference Board
+ * Device Tree Source for UniPhier LD6b Reference Board
  *
- * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -43,13 +44,13 @@
  */
 
 /dts-v1/;
-/include/ "uniphier-ph1-ld6b.dtsi"
+/include/ "uniphier-ld6b.dtsi"
 /include/ "uniphier-ref-daughter.dtsi"
 /include/ "uniphier-support-card.dtsi"
 
 / {
-	model = "UniPhier PH1-LD6b Reference Board";
-	compatible = "socionext,ph1-ld6b-ref", "socionext,ph1-ld6b";
+	model = "UniPhier LD6b Reference Board";
+	compatible = "socionext,uniphier-ld6b-ref", "socionext,uniphier-ld6b";
 
 	memory {
 		device_type = "memory";
diff --git a/arch/arm/boot/dts/uniphier-ph1-ld6b.dtsi b/arch/arm/boot/dts/uniphier-ld6b.dtsi
similarity index 82%
rename from arch/arm/boot/dts/uniphier-ph1-ld6b.dtsi
rename to arch/arm/boot/dts/uniphier-ld6b.dtsi
index 19c107c..905c77d 100644
--- a/arch/arm/boot/dts/uniphier-ph1-ld6b.dtsi
+++ b/arch/arm/boot/dts/uniphier-ld6b.dtsi
@@ -1,7 +1,8 @@
 /*
- * Device Tree Source for UniPhier PH1-LD6b SoC
+ * Device Tree Source for UniPhier LD6b SoC
  *
- * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -43,14 +44,14 @@
  */
 
 /*
- * PH1-LD6b consists of two silicon dies: D-chip and A-chip.
- * The D-chip (digital chip) is the same as the ProXstream2 die.
- * Reuse the ProXstream2 device tree with some properties overridden.
+ * LD6b consists of two silicon dies: D-chip and A-chip.
+ * The D-chip (digital chip) is the same as the PXs2 die.
+ * Reuse the PXs2 device tree with some properties overridden.
  */
-/include/ "uniphier-proxstream2.dtsi"
+/include/ "uniphier-pxs2.dtsi"
 
 / {
-	compatible = "socionext,ph1-ld6b";
+	compatible = "socionext,uniphier-ld6b";
 };
 
 /* UART3 unavailable: the pads are not wired to the package balls */
@@ -59,7 +60,7 @@
 };
 
 /*
- * PH1-LD6b and ProXstream2 have completely different packages,
+ * LD6b and PXs2 have completely different packages,
  * which makes the pinctrl driver unshareable.
  */
 &pinctrl {
diff --git a/arch/arm/boot/dts/uniphier-ph1-pro4-ace.dts b/arch/arm/boot/dts/uniphier-pro4-ace.dts
similarity index 89%
rename from arch/arm/boot/dts/uniphier-ph1-pro4-ace.dts
rename to arch/arm/boot/dts/uniphier-pro4-ace.dts
index d343586..0ab0a40 100644
--- a/arch/arm/boot/dts/uniphier-ph1-pro4-ace.dts
+++ b/arch/arm/boot/dts/uniphier-pro4-ace.dts
@@ -1,7 +1,8 @@
 /*
- * Device Tree Source for UniPhier PH1-Pro4 Ace Board
+ * Device Tree Source for UniPhier Pro4 Ace Board
  *
- * Copyright (C) 2016 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -43,11 +44,11 @@
  */
 
 /dts-v1/;
-/include/ "uniphier-ph1-pro4.dtsi"
+/include/ "uniphier-pro4.dtsi"
 
 / {
-	model = "UniPhier PH1-Pro4 Ace Board";
-	compatible = "socionext,ph1-pro4-ace", "socionext,ph1-pro4";
+	model = "UniPhier Pro4 Ace Board";
+	compatible = "socionext,uniphier-pro4-ace", "socionext,uniphier-pro4";
 
 	memory {
 		device_type = "memory";
diff --git a/arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts b/arch/arm/boot/dts/uniphier-pro4-ref.dts
similarity index 89%
rename from arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts
rename to arch/arm/boot/dts/uniphier-pro4-ref.dts
index 95f631a..9e92e60 100644
--- a/arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts
+++ b/arch/arm/boot/dts/uniphier-pro4-ref.dts
@@ -1,7 +1,8 @@
 /*
- * Device Tree Source for UniPhier PH1-Pro4 Reference Board
+ * Device Tree Source for UniPhier Pro4 Reference Board
  *
- * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -43,13 +44,13 @@
  */
 
 /dts-v1/;
-/include/ "uniphier-ph1-pro4.dtsi"
+/include/ "uniphier-pro4.dtsi"
 /include/ "uniphier-ref-daughter.dtsi"
 /include/ "uniphier-support-card.dtsi"
 
 / {
-	model = "UniPhier PH1-Pro4 Reference Board";
-	compatible = "socionext,ph1-pro4-ref", "socionext,ph1-pro4";
+	model = "UniPhier Pro4 Reference Board";
+	compatible = "socionext,uniphier-pro4-ref", "socionext,uniphier-pro4";
 
 	memory {
 		device_type = "memory";
diff --git a/arch/arm/boot/dts/uniphier-ph1-pro4-sanji.dts b/arch/arm/boot/dts/uniphier-pro4-sanji.dts
similarity index 89%
rename from arch/arm/boot/dts/uniphier-ph1-pro4-sanji.dts
rename to arch/arm/boot/dts/uniphier-pro4-sanji.dts
index 7c3a1fc..dc4ea88 100644
--- a/arch/arm/boot/dts/uniphier-ph1-pro4-sanji.dts
+++ b/arch/arm/boot/dts/uniphier-pro4-sanji.dts
@@ -1,7 +1,8 @@
 /*
- * Device Tree Source for UniPhier PH1-Pro4 Sanji Board
+ * Device Tree Source for UniPhier Pro4 Sanji Board
  *
- * Copyright (C) 2016 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -43,11 +44,11 @@
  */
 
 /dts-v1/;
-/include/ "uniphier-ph1-pro4.dtsi"
+/include/ "uniphier-pro4.dtsi"
 
 / {
-	model = "UniPhier PH1-Pro4 Sanji Board";
-	compatible = "socionext,ph1-pro4-sanji", "socionext,ph1-pro4";
+	model = "UniPhier Pro4 Sanji Board";
+	compatible = "socionext,uniphier-pro4-sanji", "socionext,uniphier-pro4";
 
 	memory {
 		device_type = "memory";
diff --git a/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi b/arch/arm/boot/dts/uniphier-pro4.dtsi
similarity index 82%
rename from arch/arm/boot/dts/uniphier-ph1-pro4.dtsi
rename to arch/arm/boot/dts/uniphier-pro4.dtsi
index 7b9da08..ba70026 100644
--- a/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi
+++ b/arch/arm/boot/dts/uniphier-pro4.dtsi
@@ -1,7 +1,8 @@
 /*
- * Device Tree Source for UniPhier PH1-Pro4 SoC
+ * Device Tree Source for UniPhier Pro4 SoC
  *
- * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -45,17 +46,17 @@
 /include/ "uniphier-common32.dtsi"
 
 / {
-	compatible = "socionext,ph1-pro4";
+	compatible = "socionext,uniphier-pro4";
 
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		enable-method = "socionext,uniphier-smp";
 
 		cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0>;
+			enable-method = "psci";
 			next-level-cache = <&l2>;
 		};
 
@@ -63,6 +64,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <1>;
+			enable-method = "psci";
 			next-level-cache = <&l2>;
 		};
 	};
@@ -73,18 +75,6 @@
 			compatible = "fixed-clock";
 			clock-frequency = <50000000>;
 		};
-
-		uart_clk: uart_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <73728000>;
-		};
-
-		i2c_clk: i2c_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <50000000>;
-		};
 	};
 };
 
@@ -109,7 +99,7 @@
 		interrupts = <0 41 4>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c0>;
-		clocks = <&i2c_clk>;
+		clocks = <&peri_clk 4>;
 		clock-frequency = <100000>;
 	};
 
@@ -122,7 +112,7 @@
 		interrupts = <0 42 4>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c1>;
-		clocks = <&i2c_clk>;
+		clocks = <&peri_clk 5>;
 		clock-frequency = <100000>;
 	};
 
@@ -135,7 +125,7 @@
 		interrupts = <0 43 4>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c2>;
-		clocks = <&i2c_clk>;
+		clocks = <&peri_clk 6>;
 		clock-frequency = <100000>;
 	};
 
@@ -148,7 +138,7 @@
 		interrupts = <0 44 4>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c3>;
-		clocks = <&i2c_clk>;
+		clocks = <&peri_clk 7>;
 		clock-frequency = <100000>;
 	};
 
@@ -161,7 +151,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		interrupts = <0 25 4>;
-		clocks = <&i2c_clk>;
+		clocks = <&peri_clk 9>;
 		clock-frequency = <400000>;
 	};
 
@@ -172,7 +162,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		interrupts = <0 26 4>;
-		clocks = <&i2c_clk>;
+		clocks = <&peri_clk 10>;
 		clock-frequency = <400000>;
 	};
 
@@ -183,6 +173,8 @@
 		interrupts = <0 80 4>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_usb2>;
+		clocks = <&mio_clk 7>, <&mio_clk 8>, <&mio_clk 12>;
+		resets = <&mio_rst 7>, <&mio_rst 8>, <&mio_rst 12>, <&sys_rst 8>;
 	};
 
 	usb3: usb@5a810100 {
@@ -192,6 +184,8 @@
 		interrupts = <0 81 4>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_usb3>;
+		clocks = <&mio_clk 7>, <&mio_clk 9>, <&mio_clk 13>;
+		resets = <&mio_rst 7>, <&mio_rst 9>, <&mio_rst 13>, <&sys_rst 8>;
 	};
 };
 
@@ -199,6 +193,31 @@
 	clock-frequency = <25000000>;
 };
 
+&mio_clk {
+	compatible = "socionext,uniphier-pro4-mio-clock";
+};
+
+&mio_rst {
+	compatible = "socionext,uniphier-pro4-mio-reset";
+	resets = <&sys_rst 7>;
+};
+
+&peri_clk {
+	compatible = "socionext,uniphier-pro4-peri-clock";
+};
+
+&peri_rst {
+	compatible = "socionext,uniphier-pro4-peri-reset";
+};
+
 &pinctrl {
 	compatible = "socionext,uniphier-pro4-pinctrl";
 };
+
+&sys_clk {
+	compatible = "socionext,uniphier-pro4-clock";
+};
+
+&sys_rst {
+	compatible = "socionext,uniphier-pro4-reset";
+};
diff --git a/arch/arm/boot/dts/uniphier-ph1-pro5.dtsi b/arch/arm/boot/dts/uniphier-pro5.dtsi
similarity index 85%
rename from arch/arm/boot/dts/uniphier-ph1-pro5.dtsi
rename to arch/arm/boot/dts/uniphier-pro5.dtsi
index 7e4aa2f..2c49c36 100644
--- a/arch/arm/boot/dts/uniphier-ph1-pro5.dtsi
+++ b/arch/arm/boot/dts/uniphier-pro5.dtsi
@@ -1,7 +1,8 @@
 /*
- * Device Tree Source for UniPhier PH1-Pro5 SoC
+ * Device Tree Source for UniPhier Pro5 SoC
  *
- * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -45,17 +46,17 @@
 /include/ "uniphier-common32.dtsi"
 
 / {
-	compatible = "socionext,ph1-pro5";
+	compatible = "socionext,uniphier-pro5";
 
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		enable-method = "socionext,uniphier-smp";
 
 		cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0>;
+			enable-method = "psci";
 			next-level-cache = <&l2>;
 		};
 
@@ -63,6 +64,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <1>;
+			enable-method = "psci";
 			next-level-cache = <&l2>;
 		};
 	};
@@ -73,18 +75,6 @@
 			compatible = "fixed-clock";
 			clock-frequency = <50000000>;
 		};
-
-		uart_clk: uart_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <73728000>;
-		};
-
-		i2c_clk: i2c_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <50000000>;
-		};
 	};
 };
 
@@ -121,7 +111,7 @@
 		interrupts = <0 41 4>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c0>;
-		clocks = <&i2c_clk>;
+		clocks = <&peri_clk 4>;
 		clock-frequency = <100000>;
 	};
 
@@ -134,7 +124,7 @@
 		interrupts = <0 42 4>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c1>;
-		clocks = <&i2c_clk>;
+		clocks = <&peri_clk 5>;
 		clock-frequency = <100000>;
 	};
 
@@ -147,7 +137,7 @@
 		interrupts = <0 43 4>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c2>;
-		clocks = <&i2c_clk>;
+		clocks = <&peri_clk 6>;
 		clock-frequency = <100000>;
 	};
 
@@ -160,7 +150,7 @@
 		interrupts = <0 44 4>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c3>;
-		clocks = <&i2c_clk>;
+		clocks = <&peri_clk 7>;
 		clock-frequency = <100000>;
 	};
 
@@ -173,7 +163,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		interrupts = <0 25 4>;
-		clocks = <&i2c_clk>;
+		clocks = <&peri_clk 9>;
 		clock-frequency = <400000>;
 	};
 
@@ -184,7 +174,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		interrupts = <0 26 4>;
-		clocks = <&i2c_clk>;
+		clocks = <&peri_clk 10>;
 		clock-frequency = <400000>;
 	};
 };
@@ -193,6 +183,30 @@
 	clock-frequency = <20000000>;
 };
 
+&mio_clk {
+	compatible = "socionext,uniphier-pro5-mio-clock";
+};
+
+&mio_rst {
+	compatible = "socionext,uniphier-pro5-mio-reset";
+};
+
+&peri_clk {
+	compatible = "socionext,uniphier-pro5-peri-clock";
+};
+
+&peri_rst {
+	compatible = "socionext,uniphier-pro5-peri-reset";
+};
+
 &pinctrl {
 	compatible = "socionext,uniphier-pro5-pinctrl";
 };
+
+&sys_clk {
+	compatible = "socionext,uniphier-pro5-clock";
+};
+
+&sys_rst {
+	compatible = "socionext,uniphier-pro5-reset";
+};
diff --git a/arch/arm/boot/dts/uniphier-proxstream2-gentil.dts b/arch/arm/boot/dts/uniphier-pxs2-gentil.dts
similarity index 88%
rename from arch/arm/boot/dts/uniphier-proxstream2-gentil.dts
rename to arch/arm/boot/dts/uniphier-pxs2-gentil.dts
index 98d895b..373818a 100644
--- a/arch/arm/boot/dts/uniphier-proxstream2-gentil.dts
+++ b/arch/arm/boot/dts/uniphier-pxs2-gentil.dts
@@ -1,7 +1,8 @@
 /*
- * Device Tree Source for UniPhier ProXstream2 Gentil Board
+ * Device Tree Source for UniPhier PXs2 Gentil Board
  *
- * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -43,11 +44,12 @@
  */
 
 /dts-v1/;
-/include/ "uniphier-proxstream2.dtsi"
+/include/ "uniphier-pxs2.dtsi"
 
 / {
-	model = "UniPhier ProXstream2 Gentil Board";
-	compatible = "socionext,proxstream2-gentil", "socionext,proxstream2";
+	model = "UniPhier PXs2 Gentil Board";
+	compatible = "socionext,uniphier-pxs2-gentil",
+		     "socionext,uniphier-pxs2";
 
 	memory {
 		device_type = "memory";
diff --git a/arch/arm/boot/dts/uniphier-proxstream2-vodka.dts b/arch/arm/boot/dts/uniphier-pxs2-vodka.dts
similarity index 88%
rename from arch/arm/boot/dts/uniphier-proxstream2-vodka.dts
rename to arch/arm/boot/dts/uniphier-pxs2-vodka.dts
index 1fb8bd7..51a3eac 100644
--- a/arch/arm/boot/dts/uniphier-proxstream2-vodka.dts
+++ b/arch/arm/boot/dts/uniphier-pxs2-vodka.dts
@@ -1,7 +1,8 @@
 /*
- * Device Tree Source for UniPhier ProXstream2 Vodka Board
+ * Device Tree Source for UniPhier PXs2 Vodka Board
  *
- * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -43,11 +44,11 @@
  */
 
 /dts-v1/;
-/include/ "uniphier-proxstream2.dtsi"
+/include/ "uniphier-pxs2.dtsi"
 
 / {
-	model = "UniPhier ProXstream2 Vodka Board";
-	compatible = "socionext,proxstream2-vodka", "socionext,proxstream2";
+	model = "UniPhier PXs2 Vodka Board";
+	compatible = "socionext,uniphier-pxs2-vodka", "socionext,uniphier-pxs2";
 
 	memory {
 		device_type = "memory";
diff --git a/arch/arm/boot/dts/uniphier-proxstream2.dtsi b/arch/arm/boot/dts/uniphier-pxs2.dtsi
similarity index 84%
rename from arch/arm/boot/dts/uniphier-proxstream2.dtsi
rename to arch/arm/boot/dts/uniphier-pxs2.dtsi
index d00d6f5..8789cd5 100644
--- a/arch/arm/boot/dts/uniphier-proxstream2.dtsi
+++ b/arch/arm/boot/dts/uniphier-pxs2.dtsi
@@ -1,7 +1,8 @@
 /*
- * Device Tree Source for UniPhier ProXstream2 SoC
+ * Device Tree Source for UniPhier PXs2 SoC
  *
- * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -45,17 +46,17 @@
 /include/ "uniphier-common32.dtsi"
 
 / {
-	compatible = "socionext,proxstream2";
+	compatible = "socionext,uniphier-pxs2";
 
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		enable-method = "socionext,uniphier-smp";
 
 		cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0>;
+			enable-method = "psci";
 			next-level-cache = <&l2>;
 		};
 
@@ -63,6 +64,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <1>;
+			enable-method = "psci";
 			next-level-cache = <&l2>;
 		};
 
@@ -70,6 +72,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <2>;
+			enable-method = "psci";
 			next-level-cache = <&l2>;
 		};
 
@@ -77,6 +80,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <3>;
+			enable-method = "psci";
 			next-level-cache = <&l2>;
 		};
 	};
@@ -87,18 +91,6 @@
 			compatible = "fixed-clock";
 			clock-frequency = <50000000>;
 		};
-
-		uart_clk: uart_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <88900000>;
-		};
-
-		i2c_clk: i2c_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <50000000>;
-		};
 	};
 };
 
@@ -123,7 +115,7 @@
 		interrupts = <0 41 4>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c0>;
-		clocks = <&i2c_clk>;
+		clocks = <&peri_clk 4>;
 		clock-frequency = <100000>;
 	};
 
@@ -136,7 +128,7 @@
 		interrupts = <0 42 4>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c1>;
-		clocks = <&i2c_clk>;
+		clocks = <&peri_clk 5>;
 		clock-frequency = <100000>;
 	};
 
@@ -149,7 +141,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c2>;
 		interrupts = <0 43 4>;
-		clocks = <&i2c_clk>;
+		clocks = <&peri_clk 6>;
 		clock-frequency = <100000>;
 	};
 
@@ -162,7 +154,7 @@
 		interrupts = <0 44 4>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c3>;
-		clocks = <&i2c_clk>;
+		clocks = <&peri_clk 7>;
 		clock-frequency = <100000>;
 	};
 
@@ -173,7 +165,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		interrupts = <0 45 4>;
-		clocks = <&i2c_clk>;
+		clocks = <&peri_clk 8>;
 		clock-frequency = <400000>;
 	};
 
@@ -184,7 +176,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		interrupts = <0 25 4>;
-		clocks = <&i2c_clk>;
+		clocks = <&peri_clk 9>;
 		clock-frequency = <400000>;
 	};
 
@@ -195,7 +187,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		interrupts = <0 26 4>;
-		clocks = <&i2c_clk>;
+		clocks = <&peri_clk 10>;
 		clock-frequency = <400000>;
 	};
 };
@@ -204,6 +196,30 @@
 	clock-frequency = <25000000>;
 };
 
+&mio_clk {
+	compatible = "socionext,uniphier-pxs2-mio-clock";
+};
+
+&mio_rst {
+	compatible = "socionext,uniphier-pxs2-mio-reset";
+};
+
+&peri_clk {
+	compatible = "socionext,uniphier-pxs2-peri-clock";
+};
+
+&peri_rst {
+	compatible = "socionext,uniphier-pxs2-peri-reset";
+};
+
 &pinctrl {
 	compatible = "socionext,uniphier-pxs2-pinctrl";
 };
+
+&sys_clk {
+	compatible = "socionext,uniphier-pxs2-clock";
+};
+
+&sys_rst {
+	compatible = "socionext,uniphier-pxs2-reset";
+};
diff --git a/arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts b/arch/arm/boot/dts/uniphier-sld3-ref.dts
similarity index 89%
rename from arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts
rename to arch/arm/boot/dts/uniphier-sld3-ref.dts
index acb4204..ac792ae0 100644
--- a/arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts
+++ b/arch/arm/boot/dts/uniphier-sld3-ref.dts
@@ -1,7 +1,8 @@
 /*
- * Device Tree Source for UniPhier PH1-sLD3 Reference Board
+ * Device Tree Source for UniPhier sLD3 Reference Board
  *
- * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -43,13 +44,13 @@
  */
 
 /dts-v1/;
-/include/ "uniphier-ph1-sld3.dtsi"
+/include/ "uniphier-sld3.dtsi"
 /include/ "uniphier-ref-daughter.dtsi"
 /include/ "uniphier-support-card.dtsi"
 
 / {
-	model = "UniPhier PH1-sLD3 Reference Board";
-	compatible = "socionext,ph1-sld3-ref", "socionext,ph1-sld3";
+	model = "UniPhier sLD3 Reference Board";
+	compatible = "socionext,uniphier-sld3-ref", "socionext,uniphier-sld3";
 
 	memory {
 		device_type = "memory";
diff --git a/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi b/arch/arm/boot/dts/uniphier-sld3.dtsi
similarity index 83%
rename from arch/arm/boot/dts/uniphier-ph1-sld3.dtsi
rename to arch/arm/boot/dts/uniphier-sld3.dtsi
index 03292f4..5fa96c9 100644
--- a/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi
+++ b/arch/arm/boot/dts/uniphier-sld3.dtsi
@@ -1,7 +1,8 @@
 /*
- * Device Tree Source for UniPhier PH1-sLD3 SoC
+ * Device Tree Source for UniPhier sLD3 SoC
  *
- * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -45,17 +46,17 @@
 /include/ "skeleton.dtsi"
 
 / {
-	compatible = "socionext,ph1-sld3";
+	compatible = "socionext,uniphier-sld3";
 
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		enable-method = "socionext,uniphier-smp";
 
 		cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0>;
+			enable-method = "psci";
 			next-level-cache = <&l2>;
 		};
 
@@ -63,10 +64,16 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <1>;
+			enable-method = "psci";
 			next-level-cache = <&l2>;
 		};
 	};
 
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
 	clocks {
 		refclk: ref {
 			#clock-cells = <0>;
@@ -79,18 +86,6 @@
 			compatible = "fixed-clock";
 			clock-frequency = <50000000>;
 		};
-
-		uart_clk: uart_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <36864000>;
-		};
-
-		iobus_clk: iobus_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <100000000>;
-		};
 	};
 
 	soc {
@@ -139,7 +134,7 @@
 			status = "disabled";
 			reg = <0x54006800 0x40>;
 			interrupts = <0 33 4>;
-			clocks = <&uart_clk>;
+			clocks = <&sys_clk 0>;
 			fifo-size = <64>;
 		};
 
@@ -148,7 +143,7 @@
 			status = "disabled";
 			reg = <0x54006900 0x40>;
 			interrupts = <0 35 4>;
-			clocks = <&uart_clk>;
+			clocks = <&sys_clk 0>;
 			fifo-size = <64>;
 		};
 
@@ -157,7 +152,7 @@
 			status = "disabled";
 			reg = <0x54006a00 0x40>;
 			interrupts = <0 37 4>;
-			clocks = <&uart_clk>;
+			clocks = <&sys_clk 0>;
 			fifo-size = <64>;
 		};
 
@@ -168,7 +163,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			interrupts = <0 41 1>;
-			clocks = <&iobus_clk>;
+			clocks = <&sys_clk 1>;
 			clock-frequency = <100000>;
 		};
 
@@ -179,7 +174,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			interrupts = <0 42 1>;
-			clocks = <&iobus_clk>;
+			clocks = <&sys_clk 1>;
 			clock-frequency = <100000>;
 		};
 
@@ -190,7 +185,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			interrupts = <0 43 1>;
-			clocks = <&iobus_clk>;
+			clocks = <&sys_clk 1>;
 			clock-frequency = <100000>;
 		};
 
@@ -201,7 +196,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			interrupts = <0 44 1>;
-			clocks = <&iobus_clk>;
+			clocks = <&sys_clk 1>;
 			clock-frequency = <100000>;
 		};
 
@@ -212,7 +207,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			interrupts = <0 45 1>;
-			clocks = <&iobus_clk>;
+			clocks = <&sys_clk 1>;
 			clock-frequency = <400000>;
 		};
 
@@ -229,6 +224,22 @@
 			reg = <0x59801000 0x400>;
 		};
 
+		mioctrl@59810000 {
+			compatible = "socionext,uniphier-mioctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59810000 0x800>;
+
+			mio_clk: clock {
+				compatible = "socionext,uniphier-sld3-mio-clock";
+				#clock-cells = <1>;
+			};
+
+			mio_rst: reset {
+				compatible = "socionext,uniphier-sld3-mio-reset";
+				#reset-cells = <1>;
+			};
+		};
+
 		usb0: usb@5a800100 {
 			compatible = "socionext,uniphier-ehci", "generic-ehci";
 			status = "disabled";
@@ -256,5 +267,21 @@
 			reg = <0x5a830100 0x100>;
 			interrupts = <0 83 4>;
 		};
+
+		sysctrl@f1840000 {
+			compatible = "socionext,uniphier-sysctrl",
+				     "simple-mfd", "syscon";
+			reg = <0xf1840000 0x4000>;
+
+			sys_clk: clock {
+				compatible = "socionext,uniphier-sld3-clock";
+				#clock-cells = <1>;
+			};
+
+			sys_rst: reset {
+				compatible = "socionext,uniphier-sld3-reset";
+				#reset-cells = <1>;
+			};
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts b/arch/arm/boot/dts/uniphier-sld8-ref.dts
similarity index 89%
rename from arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts
rename to arch/arm/boot/dts/uniphier-sld8-ref.dts
index d594f40..a8291f9 100644
--- a/arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts
+++ b/arch/arm/boot/dts/uniphier-sld8-ref.dts
@@ -1,7 +1,8 @@
 /*
- * Device Tree Source for UniPhier PH1-sLD8 Reference Board
+ * Device Tree Source for UniPhier sLD8 Reference Board
  *
- * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -43,13 +44,13 @@
  */
 
 /dts-v1/;
-/include/ "uniphier-ph1-sld8.dtsi"
+/include/ "uniphier-sld8.dtsi"
 /include/ "uniphier-ref-daughter.dtsi"
 /include/ "uniphier-support-card.dtsi"
 
 / {
-	model = "UniPhier PH1-sLD8 Reference Board";
-	compatible = "socionext,ph1-sld8-ref", "socionext,ph1-sld8";
+	model = "UniPhier sLD8 Reference Board";
+	compatible = "socionext,uniphier-sld8-ref", "socionext,uniphier-sld8";
 
 	memory {
 		device_type = "memory";
diff --git a/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi b/arch/arm/boot/dts/uniphier-sld8.dtsi
similarity index 80%
rename from arch/arm/boot/dts/uniphier-ph1-sld8.dtsi
rename to arch/arm/boot/dts/uniphier-sld8.dtsi
index 467f9d8..d8cf0e7 100644
--- a/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi
+++ b/arch/arm/boot/dts/uniphier-sld8.dtsi
@@ -1,7 +1,8 @@
 /*
- * Device Tree Source for UniPhier PH1-sLD8 SoC
+ * Device Tree Source for UniPhier sLD8 SoC
  *
- * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -45,7 +46,7 @@
 /include/ "uniphier-common32.dtsi"
 
 / {
-	compatible = "socionext,ph1-sld8";
+	compatible = "socionext,uniphier-sld8";
 
 	cpus {
 		#address-cells = <1>;
@@ -55,6 +56,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0>;
+			enable-method = "psci";
 			next-level-cache = <&l2>;
 		};
 	};
@@ -65,18 +67,6 @@
 			compatible = "fixed-clock";
 			clock-frequency = <50000000>;
 		};
-
-		uart_clk: uart_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <80000000>;
-		};
-
-		iobus_clk: iobus_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <100000000>;
-		};
 	};
 };
 
@@ -101,7 +91,7 @@
 		interrupts = <0 41 1>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c0>;
-		clocks = <&iobus_clk>;
+		clocks = <&peri_clk 4>;
 		clock-frequency = <100000>;
 	};
 
@@ -114,7 +104,7 @@
 		interrupts = <0 42 1>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c1>;
-		clocks = <&iobus_clk>;
+		clocks = <&peri_clk 5>;
 		clock-frequency = <100000>;
 	};
 
@@ -127,7 +117,7 @@
 		interrupts = <0 43 1>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c2>;
-		clocks = <&iobus_clk>;
+		clocks = <&peri_clk 6>;
 		clock-frequency = <400000>;
 	};
 
@@ -140,7 +130,7 @@
 		interrupts = <0 44 1>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c3>;
-		clocks = <&iobus_clk>;
+		clocks = <&peri_clk 7>;
 		clock-frequency = <100000>;
 	};
 
@@ -151,6 +141,8 @@
 		interrupts = <0 80 4>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_usb0>;
+		clocks = <&mio_clk 7>, <&mio_clk 8>, <&mio_clk 12>;
+		resets = <&mio_rst 7>, <&mio_rst 8>, <&mio_rst 12>, <&sys_rst 8>;
 	};
 
 	usb1: usb@5a810100 {
@@ -160,6 +152,8 @@
 		interrupts = <0 81 4>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_usb1>;
+		clocks = <&mio_clk 7>, <&mio_clk 9>, <&mio_clk 13>;
+		resets = <&mio_rst 7>, <&mio_rst 9>, <&mio_rst 13>, <&sys_rst 8>;
 	};
 
 	usb2: usb@5a820100 {
@@ -169,6 +163,8 @@
 		interrupts = <0 82 4>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_usb2>;
+		clocks = <&mio_clk 7>, <&mio_clk 10>, <&mio_clk 14>;
+		resets = <&mio_rst 7>, <&mio_rst 10>, <&mio_rst 14>, <&sys_rst 8>;
 	};
 };
 
@@ -180,6 +176,31 @@
 	interrupts = <0 29 4>;
 };
 
+&mio_clk {
+	compatible = "socionext,uniphier-sld8-mio-clock";
+};
+
+&mio_rst {
+	compatible = "socionext,uniphier-sld8-mio-reset";
+	resets = <&sys_rst 7>;
+};
+
+&peri_clk {
+	compatible = "socionext,uniphier-sld8-peri-clock";
+};
+
+&peri_rst {
+	compatible = "socionext,uniphier-sld8-peri-reset";
+};
+
 &pinctrl {
 	compatible = "socionext,uniphier-sld8-pinctrl";
 };
+
+&sys_clk {
+	compatible = "socionext,uniphier-sld8-clock";
+};
+
+&sys_rst {
+	compatible = "socionext,uniphier-sld8-reset";
+};
diff --git a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
index a8a8e43..1e0b823 100644
--- a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
+++ b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
@@ -53,6 +53,12 @@
 	panel: panel {
 		compatible = "edt,et057090dhu";
 		backlight = <&bl>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&dcu_out>;
+			};
+		};
 	};
 
 	reg_3v3: regulator-3v3 {
@@ -91,8 +97,13 @@
 &dcu0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_dcu0_1>;
-	fsl,panel = <&panel>;
 	status = "okay";
+
+	port {
+		dcu_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
 };
 
 &dspi1 {
diff --git a/arch/arm/boot/dts/vf610m4.dtsi b/arch/arm/boot/dts/vf610m4.dtsi
index 9ffe2eb..9f2c731 100644
--- a/arch/arm/boot/dts/vf610m4.dtsi
+++ b/arch/arm/boot/dts/vf610m4.dtsi
@@ -42,6 +42,7 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
+#include "skeleton.dtsi"
 #include "armv7-m.dtsi"
 #include "vfxxx.dtsi"
 
diff --git a/arch/arm/configs/colibri_pxa270_defconfig b/arch/arm/configs/colibri_pxa270_defconfig
index 0b9211b..3146ad0 100644
--- a/arch/arm/configs/colibri_pxa270_defconfig
+++ b/arch/arm/configs/colibri_pxa270_defconfig
@@ -83,7 +83,6 @@
 CONFIG_BLK_DEV_NBD=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=8
-CONFIG_IDE=y
 CONFIG_NETDEVICES=y
 CONFIG_PHYLIB=y
 CONFIG_NET_ETHERNET=y
diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig
index f33d042..5e5dd6b 100644
--- a/arch/arm/configs/davinci_all_defconfig
+++ b/arch/arm/configs/davinci_all_defconfig
@@ -1,8 +1,8 @@
-CONFIG_EXPERIMENTAL=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_FHANDLE=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -14,16 +14,16 @@
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 # CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
 CONFIG_ARCH_DAVINCI=y
 CONFIG_ARCH_DAVINCI_DM644x=y
 CONFIG_ARCH_DAVINCI_DM355=y
 CONFIG_ARCH_DAVINCI_DM646x=y
-CONFIG_ARCH_DAVINCI_DM365=y
 CONFIG_ARCH_DAVINCI_DA830=y
 CONFIG_ARCH_DAVINCI_DA850=y
-CONFIG_MACH_DA8XX_DT=y
+CONFIG_ARCH_DAVINCI_DM365=y
 CONFIG_MACH_SFFSDR=y
 CONFIG_MACH_NEUROS_OSD2=y
 CONFIG_MACH_DM355_LEOPARD=y
@@ -32,13 +32,8 @@
 CONFIG_DAVINCI_MUX_DEBUG=y
 CONFIG_DAVINCI_MUX_WARNINGS=y
 CONFIG_DAVINCI_RESET_CLOCKS=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT=y
 CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_LEDS=y
-CONFIG_USE_OF=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_ARM_APPENDED_DTB=y
@@ -50,22 +45,18 @@
 CONFIG_CPU_FREQ_GOV_POWERSAVE=m
 CONFIG_CPU_FREQ_GOV_ONDEMAND=m
 CONFIG_CPU_IDLE=y
-CONFIG_PM=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
 CONFIG_INET=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_LRO is not set
 CONFIG_NETFILTER=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=m
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=m
 CONFIG_MTD_BLOCK=m
 CONFIG_MTD_CFI=m
 CONFIG_MTD_CFI_INTELEXT=m
@@ -75,7 +66,8 @@
 CONFIG_MTD_NAND=m
 CONFIG_MTD_NAND_DAVINCI=m
 CONFIG_MTD_SPI_NOR=m
-CONFIG_PROC_DEVICETREE=y
+CONFIG_MTD_UBI=m
+CONFIG_MTD_UBI_BLOCK=y
 CONFIG_BLK_DEV_LOOP=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=1
@@ -86,25 +78,23 @@
 CONFIG_SCSI=m
 CONFIG_BLK_DEV_SD=m
 CONFIG_NETDEVICES=y
+CONFIG_NETCONSOLE=y
 CONFIG_TUN=m
-CONFIG_LXT_PHY=y
-CONFIG_LSI_ET1011C_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-CONFIG_TI_DAVINCI_EMAC=y
 CONFIG_DM9000=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
+CONFIG_TI_DAVINCI_EMAC=y
+CONFIG_LXT_PHY=y
+CONFIG_SMSC_PHY=y
+CONFIG_LSI_ET1011C_PHY=y
 CONFIG_PPP=m
+CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_NETCONSOLE=y
 # CONFIG_INPUT_MOUSEDEV is not set
 CONFIG_INPUT_EVDEV=m
 CONFIG_INPUT_EVBUG=m
 CONFIG_KEYBOARD_ATKBD=m
 CONFIG_KEYBOARD_GPIO=y
+CONFIG_KEYBOARD_GPIO_POLLED=y
 CONFIG_KEYBOARD_XTKBD=m
 # CONFIG_INPUT_MOUSE is not set
 CONFIG_INPUT_TOUCHSCREEN=y
@@ -115,8 +105,9 @@
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=3
-# CONFIG_HW_RANDOM is not set
+CONFIG_SERIAL_8250_RUNTIME_UARTS=3
 CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_DAVINCI=y
@@ -124,26 +115,25 @@
 CONFIG_SPI_DAVINCI=m
 CONFIG_PINCTRL_SINGLE=y
 CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_PCF857X=y
+CONFIG_GPIO_PCA953X=y
 CONFIG_WATCHDOG=y
 CONFIG_DAVINCI_WATCHDOG=m
 CONFIG_MFD_DM355EVM_MSP=y
 CONFIG_TPS6507X=y
-CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_TPS6507X=y
 CONFIG_FB=y
-CONFIG_FB_DA8XX=y
 CONFIG_FIRMWARE_EDID=y
-# CONFIG_VGA_CONSOLE is not set
+CONFIG_FB_DA8XX=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_LOGO=y
 CONFIG_SOUND=m
 CONFIG_SND=m
 CONFIG_SND_SOC=m
-CONFIG_SND_DAVINCI_SOC=m
-CONFIG_SND_DAVINCI_SOC_EVM=m
-CONFIG_SND_DM6467_SOC_EVM=m
+CONFIG_SND_EDMA_SOC=m
+CONFIG_SND_DA850_SOC_EVM=m
+CONFIG_SND_SIMPLE_CARD=m
 CONFIG_HID=m
 CONFIG_HID_A4TECH=m
 CONFIG_HID_APPLE=m
@@ -163,10 +153,9 @@
 CONFIG_HID_SUNPLUS=m
 CONFIG_USB=m
 CONFIG_USB_MON=m
-CONFIG_USB_MUSB_HDRC=m
-CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_MUSB_PIO_ONLY=y
 CONFIG_USB_STORAGE=m
+CONFIG_USB_MUSB_HDRC=m
+CONFIG_MUSB_PIO_ONLY=y
 CONFIG_USB_TEST=m
 CONFIG_USB_GADGET=m
 CONFIG_USB_GADGET_DEBUG_FILES=y
@@ -188,8 +177,11 @@
 CONFIG_LEDS_TRIGGER_TIMER=m
 CONFIG_LEDS_TRIGGER_HEARTBEAT=m
 CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_OMAP=m
 CONFIG_DMADEVICES=y
 CONFIG_TI_EDMA=y
+CONFIG_MEMORY=y
+CONFIG_TI_AEMIF=m
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 CONFIG_XFS_FS=m
@@ -198,30 +190,22 @@
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
 CONFIG_JFFS2_FS=m
+CONFIG_UBIFS_FS=m
 CONFIG_CRAMFS=y
 CONFIG_MINIX_FS=m
 CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
-CONFIG_SMB_FS=m
-CONFIG_PARTITION_ADVANCED=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ASCII=m
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_UTF8=m
 CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
 CONFIG_TIMER_STATS=y
 CONFIG_DEBUG_RT_MUTEXES=y
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_ARM_UNWIND is not set
 CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
 CONFIG_CRC_T10DIF=m
-CONFIG_GPIO_PCA953X=y
-CONFIG_KEYBOARD_GPIO_POLLED=y
diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig
index 36cc7cc..4e484f4 100644
--- a/arch/arm/configs/exynos_defconfig
+++ b/arch/arm/configs/exynos_defconfig
@@ -17,6 +17,7 @@
 CONFIG_AEABI=y
 CONFIG_HIGHMEM=y
 CONFIG_CMA=y
+CONFIG_SECCOMP=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_ARM_APPENDED_DTB=y
@@ -35,6 +36,8 @@
 CONFIG_VFP=y
 CONFIG_NEON=y
 CONFIG_KERNEL_MODE_NEON=y
+CONFIG_PM_DEBUG=y
+CONFIG_PM_ADVANCED_DEBUG=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -219,6 +222,12 @@
 CONFIG_COMMON_CLK_MAX77686=y
 CONFIG_COMMON_CLK_MAX77802=y
 CONFIG_COMMON_CLK_S2MPS11=y
+CONFIG_PM_DEVFREQ=y
+CONFIG_DEVFREQ_GOV_PERFORMANCE=y
+CONFIG_DEVFREQ_GOV_POWERSAVE=y
+CONFIG_DEVFREQ_GOV_USERSPACE=y
+CONFIG_ARM_EXYNOS_BUS_DEVFREQ=y
+CONFIG_DEVFREQ_EVENT_EXYNOS_NOCP=y
 CONFIG_EXTCON=y
 CONFIG_EXTCON_MAX14577=y
 CONFIG_EXTCON_MAX77693=y
diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig
index 9083399..5f013c9f 100644
--- a/arch/arm/configs/imx_v4_v5_defconfig
+++ b/arch/arm/configs/imx_v4_v5_defconfig
@@ -22,14 +22,13 @@
 CONFIG_ARCH_MULTI_V5=y
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_MXC=y
-CONFIG_MACH_SCB9328=y
-CONFIG_MACH_APF9328=y
 CONFIG_MACH_MX21ADS=y
 CONFIG_MACH_MX27ADS=y
 CONFIG_MACH_MX27_3DS=y
 CONFIG_MACH_IMX27_VISSTRIM_M10=y
 CONFIG_MACH_PCA100=y
 CONFIG_MACH_IMX27_DT=y
+CONFIG_SOC_IMX1=y
 CONFIG_SOC_IMX25=y
 CONFIG_PREEMPT=y
 CONFIG_AEABI=y
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 3219480..8ec4dbb 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -1,6 +1,5 @@
 CONFIG_KERNEL_LZO=y
 CONFIG_SYSVIPC=y
-CONFIG_FHANDLE=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_IKCONFIG=y
@@ -72,7 +71,6 @@
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
 CONFIG_NETFILTER=y
 CONFIG_CAN=y
 CONFIG_CAN_FLEXCAN=y
@@ -228,7 +226,6 @@
 CONFIG_USB_VIDEO_CLASS=m
 CONFIG_V4L_PLATFORM_DRIVERS=y
 CONFIG_SOC_CAMERA=y
-CONFIG_VIDEO_MX3=y
 CONFIG_V4L_MEM2MEM_DRIVERS=y
 CONFIG_VIDEO_CODA=y
 CONFIG_SOC_CAMERA_OV2640=y
@@ -241,6 +238,7 @@
 CONFIG_DRM_IMX_TVE=y
 CONFIG_DRM_IMX_LDB=y
 CONFIG_DRM_IMX_HDMI=y
+CONFIG_DRM_ETNAVIV=y
 CONFIG_FB_MXS=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_LCD_L4F00242T03=y
@@ -264,6 +262,7 @@
 CONFIG_SND_SOC_FSL_ASOC_CARD=y
 CONFIG_SND_SOC_CS42XX8_I2C=y
 CONFIG_SND_SOC_TLV320AIC3X=y
+CONFIG_SND_SOC_WM8960=y
 CONFIG_SND_SIMPLE_CARD=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
@@ -276,6 +275,7 @@
 CONFIG_USB_SERIAL_GENERIC=y
 CONFIG_USB_SERIAL_FTDI_SIO=m
 CONFIG_USB_SERIAL_OPTION=m
+CONFIG_USB_TEST=m
 CONFIG_USB_EHSET_TEST_FIXTURE=m
 CONFIG_NOP_USB_XCEIV=y
 CONFIG_USB_MXS_PHY=y
@@ -293,7 +293,14 @@
 CONFIG_USB_CONFIGFS_MASS_STORAGE=y
 CONFIG_USB_CONFIGFS_F_LB_SS=y
 CONFIG_USB_CONFIGFS_F_FS=y
+CONFIG_USB_CONFIGFS_F_UAC1=y
+CONFIG_USB_CONFIGFS_F_UAC2=y
+CONFIG_USB_CONFIGFS_F_MIDI=y
+CONFIG_USB_CONFIGFS_F_HID=y
+CONFIG_USB_CONFIGFS_F_UVC=y
+CONFIG_USB_CONFIGFS_F_PRINTER=y
 CONFIG_USB_ZERO=m
+CONFIG_USB_AUDIO=m
 CONFIG_USB_ETH=m
 CONFIG_USB_G_NCM=m
 CONFIG_USB_GADGETFS=m
@@ -329,13 +336,12 @@
 CONFIG_IMX_SDMA=y
 CONFIG_MXS_DMA=y
 CONFIG_STAGING=y
-# CONFIG_IOMMU_SUPPORT is not set
 CONFIG_IIO=y
 CONFIG_VF610_ADC=y
+CONFIG_MPL3115=y
 CONFIG_PWM=y
 CONFIG_PWM_FSL_FTM=y
 CONFIG_PWM_IMX=y
-CONFIG_NVMEM=y
 CONFIG_NVMEM_IMX_OCOTP=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
@@ -355,7 +361,6 @@
 CONFIG_UDF_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
 CONFIG_JFFS2_FS=y
 CONFIG_UBIFS_FS=y
 CONFIG_NFS_FS=y
diff --git a/arch/arm/configs/integrator_defconfig b/arch/arm/configs/integrator_defconfig
index 71f1467..869faae 100644
--- a/arch/arm/configs/integrator_defconfig
+++ b/arch/arm/configs/integrator_defconfig
@@ -13,15 +13,8 @@
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_INTEGRATOR=y
 CONFIG_ARCH_INTEGRATOR_AP=y
-CONFIG_ARCH_INTEGRATOR_CP=y
 CONFIG_INTEGRATOR_IMPD1=y
-CONFIG_CPU_ARM720T=y
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_ARM922T=y
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_ARM1020=y
-CONFIG_CPU_ARM1022=y
-CONFIG_CPU_ARM1026=y
+CONFIG_ARCH_INTEGRATOR_CP=y
 CONFIG_PCI=y
 CONFIG_PREEMPT=y
 CONFIG_AEABI=y
@@ -33,7 +26,6 @@
 CONFIG_CPU_FREQ_GOV_POWERSAVE=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
 CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_FPE_NWFPE=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -51,7 +43,7 @@
 CONFIG_MTD_CFI_ADV_OPTIONS=y
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_PHYSMAP=y
-CONFIG_PROC_DEVICETREE=y
+CONFIG_MTD_PHYSMAP_OF=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=8192
@@ -71,6 +63,7 @@
 CONFIG_MMC_ARMMMCI=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_SYSCON=y
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_LEDS_TRIGGER_CPU=y
diff --git a/arch/arm/configs/lpd270_defconfig b/arch/arm/configs/lpd270_defconfig
index 1c8c9ee..a9dd1e9 100644
--- a/arch/arm/configs/lpd270_defconfig
+++ b/arch/arm/configs/lpd270_defconfig
@@ -31,7 +31,6 @@
 # CONFIG_MTD_CFI_I1 is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_BLK_DEV_NBD=y
-CONFIG_IDE=y
 CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y
 CONFIG_SMC91X=y
diff --git a/arch/arm/configs/multi_v4t_defconfig b/arch/arm/configs/multi_v4t_defconfig
index 433eebb..9a6390c 100644
--- a/arch/arm/configs/multi_v4t_defconfig
+++ b/arch/arm/configs/multi_v4t_defconfig
@@ -20,9 +20,7 @@
 CONFIG_INTEGRATOR_CM920T=y
 CONFIG_INTEGRATOR_CM922T_XA10=y
 CONFIG_ARCH_MXC=y
-CONFIG_MACH_SCB9328=y
-CONFIG_MACH_APF9328=y
-CONFIG_MACH_IMX1_DT=y
+CONFIG_SOC_IMX1=y
 CONFIG_ARCH_NSPIRE=y
 CONFIG_AEABI=y
 # CONFIG_ATAGS is not set
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 5845910..437d074 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -126,9 +126,11 @@
 CONFIG_NR_CPUS=16
 CONFIG_HIGHPTE=y
 CONFIG_CMA=y
+CONFIG_SECCOMP=y
 CONFIG_ARM_APPENDED_DTB=y
 CONFIG_ARM_ATAG_DTB_COMPAT=y
 CONFIG_KEXEC=y
+CONFIG_EFI=y
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_STAT_DETAILS=y
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
@@ -136,6 +138,7 @@
 CONFIG_CPU_FREQ_GOV_USERSPACE=m
 CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
 CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
+CONFIG_ARM_IMX6Q_CPUFREQ=y
 CONFIG_QORIQ_CPUFREQ=y
 CONFIG_CPU_IDLE=y
 CONFIG_ARM_CPUIDLE=y
@@ -220,6 +223,7 @@
 CONFIG_SATA_AHCI_PLATFORM=y
 CONFIG_AHCI_BRCM=y
 CONFIG_AHCI_ST=y
+CONFIG_AHCI_IMX=y
 CONFIG_AHCI_SUNXI=y
 CONFIG_AHCI_TEGRA=y
 CONFIG_SATA_HIGHBANK=y
@@ -277,7 +281,7 @@
 CONFIG_MOUSE_CYAPA=m
 CONFIG_MOUSE_ELAN_I2C=y
 CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ATMEL_MXT=y
+CONFIG_TOUCHSCREEN_ATMEL_MXT=m
 CONFIG_TOUCHSCREEN_MMS114=m
 CONFIG_TOUCHSCREEN_ST1232=m
 CONFIG_TOUCHSCREEN_STMPE=y
@@ -499,6 +503,7 @@
 CONFIG_REGULATOR_ACT8945A=y
 CONFIG_REGULATOR_AB8500=y
 CONFIG_REGULATOR_ACT8865=y
+CONFIG_REGULATOR_ANATOP=y
 CONFIG_REGULATOR_AS3711=y
 CONFIG_REGULATOR_AS3722=y
 CONFIG_REGULATOR_AXP20X=m
@@ -593,6 +598,7 @@
 CONFIG_DRM_STI=m
 CONFIG_DRM_VC4=y
 CONFIG_FB_ARMCLCD=y
+CONFIG_FB_EFI=y
 CONFIG_FB_WM8505=y
 CONFIG_FB_SH_MOBILE_LCDC=y
 CONFIG_FB_SIMPLE=y
@@ -750,6 +756,7 @@
 CONFIG_RTC_DRV_RX8581=m
 CONFIG_RTC_DRV_EM3027=y
 CONFIG_RTC_DRV_DA9063=m
+CONFIG_RTC_DRV_EFI=m
 CONFIG_RTC_DRV_DIGICOLOR=m
 CONFIG_RTC_DRV_S5M=m
 CONFIG_RTC_DRV_S3C=m
@@ -867,6 +874,8 @@
 CONFIG_NVMEM_SUNXI_SID=y
 CONFIG_BCM2835_MBOX=y
 CONFIG_RASPBERRYPI_FIRMWARE=y
+CONFIG_EFI_VARS=m
+CONFIG_EFI_CAPSULE_LOADER=m
 CONFIG_EXT4_FS=y
 CONFIG_AUTOFS4_FS=y
 CONFIG_MSDOS_FS=y
diff --git a/arch/arm/configs/mvebu_v5_defconfig b/arch/arm/configs/mvebu_v5_defconfig
index 6051c51..f7f6039 100644
--- a/arch/arm/configs/mvebu_v5_defconfig
+++ b/arch/arm/configs/mvebu_v5_defconfig
@@ -91,10 +91,7 @@
 CONFIG_SATA_MV=y
 CONFIG_NETDEVICES=y
 CONFIG_NET_DSA_MV88E6060=y
-CONFIG_NET_DSA_MV88E6131=y
-CONFIG_NET_DSA_MV88E6123=y
-CONFIG_NET_DSA_MV88E6171=y
-CONFIG_NET_DSA_MV88E6352=y
+CONFIG_NET_DSA_MV88E6XXX=y
 CONFIG_MV643XX_ETH=y
 CONFIG_R8169=y
 CONFIG_MARVELL_PHY=y
diff --git a/arch/arm/configs/mvebu_v7_defconfig b/arch/arm/configs/mvebu_v7_defconfig
index 486a4ca..f1a0e25 100644
--- a/arch/arm/configs/mvebu_v7_defconfig
+++ b/arch/arm/configs/mvebu_v7_defconfig
@@ -48,6 +48,7 @@
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_INTELEXT=y
@@ -59,6 +60,7 @@
 CONFIG_MTD_NAND_PXA3xx=y
 CONFIG_MTD_SPI_NOR=y
 CONFIG_SRAM=y
+CONFIG_MTD_UBI=y
 CONFIG_EEPROM_AT24=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_ATA=y
@@ -140,6 +142,7 @@
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
+CONFIG_UBIFS_FS=y
 CONFIG_NFS_FS=y
 CONFIG_ROOT_NFS=y
 CONFIG_NLS_CODEPAGE_437=y
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index 487c6c3..53e1a88 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -139,7 +139,6 @@
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=16384
 CONFIG_SENSORS_TSL2550=m
-CONFIG_BMP085_I2C=m
 CONFIG_SRAM=y
 CONFIG_EEPROM_AT24=m
 CONFIG_SENSORS_LIS3_I2C=m
@@ -428,6 +427,7 @@
 CONFIG_TI_EMIF=m
 CONFIG_IIO=m
 CONFIG_TI_AM335X_ADC=m
+CONFIG_BMP280=m
 CONFIG_PWM=y
 CONFIG_PWM_OMAP_DMTIMER=m
 CONFIG_PWM_TIECAP=m
diff --git a/arch/arm/configs/pxa255-idp_defconfig b/arch/arm/configs/pxa255-idp_defconfig
index 917a070b..088627a 100644
--- a/arch/arm/configs/pxa255-idp_defconfig
+++ b/arch/arm/configs/pxa255-idp_defconfig
@@ -28,7 +28,6 @@
 # CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
 # CONFIG_MTD_CFI_I1 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_IDE=y
 CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y
 CONFIG_SMC91X=y
diff --git a/arch/arm/configs/pxa_defconfig b/arch/arm/configs/pxa_defconfig
index dc5517e..a016ecc 100644
--- a/arch/arm/configs/pxa_defconfig
+++ b/arch/arm/configs/pxa_defconfig
@@ -26,8 +26,6 @@
 CONFIG_LDM_PARTITION=y
 CONFIG_CMDLINE_PARTITION=y
 CONFIG_ARCH_PXA=y
-CONFIG_MACH_PXA27X_DT=y
-CONFIG_MACH_PXA3XX_DT=y
 CONFIG_ARCH_LUBBOCK=y
 CONFIG_MACH_MAINSTONE=y
 CONFIG_MACH_ZYLONITE300=y
diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
index b3ade55..bc4bfe0 100644
--- a/arch/arm/configs/s3c2410_defconfig
+++ b/arch/arm/configs/s3c2410_defconfig
@@ -76,7 +76,6 @@
 CONFIG_TCP_CONG_VENO=m
 CONFIG_TCP_CONG_YEAH=m
 CONFIG_TCP_CONG_ILLINOIS=m
-CONFIG_IPV6_PRIVACY=y
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
diff --git a/arch/arm/configs/trizeps4_defconfig b/arch/arm/configs/trizeps4_defconfig
index 0ada29d..492f7f3 100644
--- a/arch/arm/configs/trizeps4_defconfig
+++ b/arch/arm/configs/trizeps4_defconfig
@@ -94,8 +94,6 @@
 CONFIG_BLK_DEV_NBD=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=8
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECS=m
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_SG=y
diff --git a/arch/arm/include/asm/hardware/cache-uniphier.h b/arch/arm/include/asm/hardware/cache-uniphier.h
index 102e3fb..eaa60da 100644
--- a/arch/arm/include/asm/hardware/cache-uniphier.h
+++ b/arch/arm/include/asm/hardware/cache-uniphier.h
@@ -1,5 +1,6 @@
 /*
- * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -19,28 +20,11 @@
 
 #ifdef CONFIG_CACHE_UNIPHIER
 int uniphier_cache_init(void);
-int uniphier_cache_l2_is_enabled(void);
-void uniphier_cache_l2_touch_range(unsigned long start, unsigned long end);
-void uniphier_cache_l2_set_locked_ways(u32 way_mask);
 #else
 static inline int uniphier_cache_init(void)
 {
 	return -ENODEV;
 }
-
-static inline int uniphier_cache_l2_is_enabled(void)
-{
-	return 0;
-}
-
-static inline void uniphier_cache_l2_touch_range(unsigned long start,
-						 unsigned long end)
-{
-}
-
-static inline void uniphier_cache_l2_set_locked_ways(u32 way_mask)
-{
-}
 #endif
 
 #endif /* __CACHE_UNIPHIER_H */
diff --git a/arch/arm/include/debug/brcmstb.S b/arch/arm/include/debug/brcmstb.S
new file mode 100644
index 0000000..9113d7b
--- /dev/null
+++ b/arch/arm/include/debug/brcmstb.S
@@ -0,0 +1,145 @@
+/*
+ * Copyright (C) 2016 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/serial_reg.h>
+
+/* Physical register offset and virtual register offset */
+#define REG_PHYS_BASE		0xf0000000
+#define REG_VIRT_BASE		0xfc000000
+#define REG_PHYS_ADDR(x)	((x) + REG_PHYS_BASE)
+
+/* Product id can be read from here */
+#define SUN_TOP_CTRL_BASE	REG_PHYS_ADDR(0x404000)
+
+#define UARTA_3390		REG_PHYS_ADDR(0x40a900)
+#define UARTA_7250		REG_PHYS_ADDR(0x40b400)
+#define UARTA_7268		REG_PHYS_ADDR(0x40c000)
+#define UARTA_7271		UARTA_7268
+#define UARTA_7364		REG_PHYS_ADDR(0x40b000)
+#define UARTA_7366		UARTA_7364
+#define UARTA_74371		REG_PHYS_ADDR(0x406b00)
+#define UARTA_7439		REG_PHYS_ADDR(0x40a900)
+#define UARTA_7445		REG_PHYS_ADDR(0x40ab00)
+
+#define UART_SHIFT		2
+
+#define checkuart(rp, rv, family_id, family) \
+		/* Load family id */ \
+		ldr	rp, =family_id ; \
+		/* Compare SUN_TOP_CTRL value against it */ \
+		cmp	rp, rv ; \
+		/* Passed test, load address */ \
+		ldreq	rp, =UARTA_##family ; \
+		/* Jump to save UART address */ \
+		beq	91f
+
+		.macro  addruart, rp, rv, tmp
+		adr	\rp, 99f		@ actual addr of 99f
+		ldr	\rv, [\rp]		@ linked addr is stored there
+		sub	\rv, \rv, \rp		@ offset between the two
+		ldr	\rp, [\rp, #4]		@ linked brcmstb_uart_config
+		sub	\tmp, \rp, \rv		@ actual brcmstb_uart_config
+		ldr	\rp, [\tmp]		@ Load brcmstb_uart_config
+		cmp	\rp, #1			@ needs initialization?
+		bne	100f			@ no; go load the addresses
+		mov	\rv, #0			@ yes; record init is done
+		str	\rv, [\tmp]
+
+		/* Check SUN_TOP_CTRL base */
+		ldr	\rp, =SUN_TOP_CTRL_BASE	@ load SUN_TOP_CTRL PA
+		ldr	\rv, [\rp, #0]		@ get register contents
+		and	\rv, \rv, #0xffffff00	@ strip revision bits [7:0]
+
+		/* Chip specific detection starts here */
+20:		checkuart(\rp, \rv, 0x33900000, 3390)
+21:		checkuart(\rp, \rv, 0x72500000, 7250)
+22:		checkuart(\rp, \rv, 0x72680000, 7268)
+23:		checkuart(\rp, \rv, 0x72710000, 7271)
+24:		checkuart(\rp, \rv, 0x73640000, 7364)
+25:		checkuart(\rp, \rv, 0x73660000, 7366)
+26:		checkuart(\rp, \rv, 0x07437100, 74371)
+27:		checkuart(\rp, \rv, 0x74390000, 7439)
+28:		checkuart(\rp, \rv, 0x74450000, 7445)
+
+		/* No valid UART found */
+90:		mov	\rp, #0
+		/* fall through */
+
+		/* Record whichever UART we chose */
+91:		str	\rp, [\tmp, #4]		@ Store in brcmstb_uart_phys
+		cmp	\rp, #0			@ Valid UART address?
+		bne	92f			@ Yes, go process it
+		str	\rp, [\tmp, #8]		@ Store 0 in brcmstb_uart_virt
+		b	100f			@ Done
+92:		and     \rv, \rp, #0xffffff	@ offset within 16MB section
+		add	\rv, \rv, #REG_VIRT_BASE
+		str	\rv, [\tmp, #8]		@ Store in brcmstb_uart_virt
+		b	100f
+
+		.align
+99:		.word	.
+		.word	brcmstb_uart_config
+		.ltorg
+
+		/* Load previously selected UART address */
+100:		ldr	\rp, [\tmp, #4]		@ Load brcmstb_uart_phys
+		ldr	\rv, [\tmp, #8]		@ Load brcmstb_uart_virt
+		.endm
+
+		.macro	store, rd, rx:vararg
+		str	\rd, \rx
+		.endm
+
+		.macro	load, rd, rx:vararg
+		ldr	\rd, \rx
+		.endm
+
+		.macro	senduart,rd,rx
+		store	\rd, [\rx, #UART_TX << UART_SHIFT]
+		.endm
+
+		.macro	busyuart,rd,rx
+1002:		load	\rd, [\rx, #UART_LSR << UART_SHIFT]
+		and	\rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE
+		teq	\rd, #UART_LSR_TEMT | UART_LSR_THRE
+		bne	1002b
+		.endm
+
+		.macro	waituart,rd,rx
+		.endm
+
+/*
+ * Storage for the state maintained by the macros above.
+ *
+ * In the kernel proper, this data is located in arch/arm/mach-bcm/brcmstb.c.
+ * That's because this header is included from multiple files, and we only
+ * want a single copy of the data. In particular, the UART probing code above
+ * assumes it's running using physical addresses. This is true when this file
+ * is included from head.o, but not when included from debug.o. So we need
+ * to share the probe results between the two copies, rather than having
+ * to re-run the probing again later.
+ *
+ * In the decompressor, we put the symbol/storage right here, since common.c
+ * isn't included in the decompressor build. This symbol gets put in .text
+ * even though it's really data, since .data is discarded from the
+ * decompressor. Luckily, .text is writeable in the decompressor, unless
+ * CONFIG_ZBOOT_ROM. That dependency is handled in arch/arm/Kconfig.debug.
+ */
+#if defined(ZIMAGE)
+brcmstb_uart_config:
+	/* Debug UART initialization required */
+	.word 1
+	/* Debug UART physical address */
+	.word 0
+	/* Debug UART virtual address */
+	.word 0
+#endif
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 5204395..841e924 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -55,7 +55,6 @@
 	select ATMEL_ST
 	select CPU_ARM920T
 	select HAVE_AT91_USB_CLK
-	select MIGHT_HAVE_PCI
 	select PINCTRL_AT91
 	select SOC_SAM_V4_V5
 	select SRAM if PM
diff --git a/arch/arm/mach-axxia/Kconfig b/arch/arm/mach-axxia/Kconfig
index 6c6d5e7..fe627cb 100644
--- a/arch/arm/mach-axxia/Kconfig
+++ b/arch/arm/mach-axxia/Kconfig
@@ -7,8 +7,6 @@
 	select ARM_TIMER_SP804
 	select HAVE_ARM_ARCH_TIMER
 	select MFD_SYSCON
-	select MIGHT_HAVE_PCI
-	select PCI_DOMAINS if PCI
 	select ZONE_DMA
 	help
 	  This enables support for the LSI Axxia devices.
diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
index 7bf3ae7..a0e66d8 100644
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@@ -158,6 +158,20 @@
 	  This enables support for the Broadcom BCM2835 and BCM2836 SoCs.
 	  This SoC is used in the Raspberry Pi and Roku 2 devices.
 
+config ARCH_BCM_53573
+	bool "Broadcom BCM53573 SoC series support"
+	depends on ARCH_MULTI_V7
+	select ARCH_BCM_IPROC
+	select HAVE_ARM_ARCH_TIMER
+	help
+	  BCM53573 series is set of SoCs using ARM Cortex-A7 CPUs with wireless
+	  embedded in the chipset.
+	  This SoC line is mostly used in home routers and is some cheaper
+	  alternative for Northstar family.
+
+	  The base chip is BCM53573 and there are some packaging modifications
+	  like BCM47189 and BCM47452.
+
 config ARCH_BCM_63XX
 	bool "Broadcom BCM63xx DSL SoC"
 	depends on ARCH_MULTI_V7
diff --git a/arch/arm/mach-bcm/brcmstb.c b/arch/arm/mach-bcm/brcmstb.c
index 99a67cf..07e3a86 100644
--- a/arch/arm/mach-bcm/brcmstb.c
+++ b/arch/arm/mach-bcm/brcmstb.c
@@ -19,6 +19,22 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
+/*
+ * Storage for debug-macro.S's state.
+ *
+ * This must be in .data not .bss so that it gets initialized each time the
+ * kernel is loaded. The data is declared here rather than debug-macro.S so
+ * that multiple inclusions of debug-macro.S point at the same data.
+ */
+u32 brcmstb_uart_config[3] = {
+	/* Debug UART initialization required */
+	1,
+	/* Debug UART physical address */
+	0,
+	/* Debug UART virtual address */
+	0,
+};
+
 static void __init brcmstb_init_irq(void)
 {
 	irqchip_init();
diff --git a/arch/arm/mach-clps711x/Makefile.boot b/arch/arm/mach-clps711x/Makefile.boot
deleted file mode 100644
index e69de29..0000000
--- a/arch/arm/mach-clps711x/Makefile.boot
+++ /dev/null
diff --git a/arch/arm/mach-clps711x/board-autcpu12.c b/arch/arm/mach-clps711x/board-autcpu12.c
deleted file mode 100644
index ba3d7d1..0000000
--- a/arch/arm/mach-clps711x/board-autcpu12.c
+++ /dev/null
@@ -1,275 +0,0 @@
-/*
- *  linux/arch/arm/mach-clps711x/autcpu12.c
- *
- * (c) 2001 Thomas Gleixner, autronix automation <gleixner@autronix.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/plat-ram.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/nand-gpio.h>
-#include <linux/platform_device.h>
-#include <linux/gpio/driver.h>
-
-#include <mach/hardware.h>
-#include <asm/sizes.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include "devices.h"
-
-/* NOR flash */
-#define AUTCPU12_FLASH_BASE	(CS0_PHYS_BASE)
-
-/* Board specific hardware definitions */
-#define AUTCPU12_CHAR_LCD_BASE	(CS1_PHYS_BASE + 0x00000000)
-#define AUTCPU12_CSAUX1_BASE	(CS1_PHYS_BASE + 0x04000000)
-#define AUTCPU12_CAN_BASE	(CS1_PHYS_BASE + 0x08000000)
-#define AUTCPU12_TOUCH_BASE	(CS1_PHYS_BASE + 0x0a000000)
-#define AUTCPU12_IO_BASE	(CS1_PHYS_BASE + 0x0c000000)
-#define AUTCPU12_LPT_BASE	(CS1_PHYS_BASE + 0x0e000000)
-
-/* NVRAM */
-#define AUTCPU12_NVRAM_BASE	(CS1_PHYS_BASE + 0x02000000)
-
-/* SmartMedia flash */
-#define AUTCPU12_SMC_BASE	(CS1_PHYS_BASE + 0x06000000)
-#define AUTCPU12_SMC_SEL_BASE	(AUTCPU12_SMC_BASE + 0x10)
-
-/* Ethernet */
-#define AUTCPU12_CS8900_BASE	(CS2_PHYS_BASE + 0x300)
-#define AUTCPU12_CS8900_IRQ	(IRQ_EINT3)
-
-/* NAND flash */
-#define AUTCPU12_MMGPIO_BASE	(CLPS711X_NR_GPIO)
-#define AUTCPU12_SMC_NCE	(AUTCPU12_MMGPIO_BASE + 0) /* Bit 0 */
-#define AUTCPU12_SMC_RDY	CLPS711X_GPIO(1, 2)
-#define AUTCPU12_SMC_ALE	CLPS711X_GPIO(1, 3)
-#define AUTCPU12_SMC_CLE	CLPS711X_GPIO(1, 4)
-
-/* LCD contrast digital potentiometer */
-#define AUTCPU12_DPOT_CS	CLPS711X_GPIO(4, 0)
-#define AUTCPU12_DPOT_CLK	CLPS711X_GPIO(4, 1)
-#define AUTCPU12_DPOT_UD	CLPS711X_GPIO(4, 2)
-
-static struct resource autcpu12_cs8900_resource[] __initdata = {
-	DEFINE_RES_MEM(AUTCPU12_CS8900_BASE, SZ_1K),
-	DEFINE_RES_IRQ(AUTCPU12_CS8900_IRQ),
-};
-
-static struct resource autcpu12_nand_resource[] __initdata = {
-	DEFINE_RES_MEM(AUTCPU12_SMC_BASE, SZ_16),
-};
-
-static struct mtd_partition autcpu12_nand_parts[] __initdata = {
-	{
-		.name	= "Flash partition 1",
-		.offset	= 0,
-		.size	= SZ_8M,
-	},
-	{
-		.name	= "Flash partition 2",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static void __init autcpu12_adjust_parts(struct gpio_nand_platdata *pdata,
-					 size_t sz)
-{
-	switch (sz) {
-	case SZ_16M:
-	case SZ_32M:
-		break;
-	case SZ_64M:
-	case SZ_128M:
-		pdata->parts[0].size = SZ_16M;
-		break;
-	default:
-		pr_warn("Unsupported SmartMedia device size %u\n", sz);
-		break;
-	}
-}
-
-static struct gpio_nand_platdata autcpu12_nand_pdata __initdata = {
-	.gpio_rdy	= AUTCPU12_SMC_RDY,
-	.gpio_nce	= AUTCPU12_SMC_NCE,
-	.gpio_ale	= AUTCPU12_SMC_ALE,
-	.gpio_cle	= AUTCPU12_SMC_CLE,
-	.gpio_nwp	= -1,
-	.chip_delay	= 20,
-	.parts		= autcpu12_nand_parts,
-	.num_parts	= ARRAY_SIZE(autcpu12_nand_parts),
-	.adjust_parts	= autcpu12_adjust_parts,
-};
-
-static struct platform_device autcpu12_nand_pdev __initdata = {
-	.name		= "gpio-nand",
-	.id		= -1,
-	.resource	= autcpu12_nand_resource,
-	.num_resources	= ARRAY_SIZE(autcpu12_nand_resource),
-	.dev		= {
-		.platform_data = &autcpu12_nand_pdata,
-	},
-};
-
-static struct resource autcpu12_mmgpio_resource[] __initdata = {
-	DEFINE_RES_MEM_NAMED(AUTCPU12_SMC_SEL_BASE, SZ_1, "dat"),
-};
-
-static struct bgpio_pdata autcpu12_mmgpio_pdata __initdata = {
-	.base	= AUTCPU12_MMGPIO_BASE,
-	.ngpio	= 8,
-};
-
-static struct platform_device autcpu12_mmgpio_pdev __initdata = {
-	.name		= "basic-mmio-gpio",
-	.id		= -1,
-	.resource	= autcpu12_mmgpio_resource,
-	.num_resources	= ARRAY_SIZE(autcpu12_mmgpio_resource),
-	.dev		= {
-		.platform_data = &autcpu12_mmgpio_pdata,
-	},
-};
-
-static const struct gpio const autcpu12_gpios[] __initconst = {
-	{ AUTCPU12_DPOT_CS,	GPIOF_OUT_INIT_HIGH,	"DPOT CS" },
-	{ AUTCPU12_DPOT_CLK,	GPIOF_OUT_INIT_LOW,	"DPOT CLK" },
-	{ AUTCPU12_DPOT_UD,	GPIOF_OUT_INIT_LOW,	"DPOT UD" },
-};
-
-static struct mtd_partition autcpu12_flash_partitions[] = {
-	{
-		.name	= "NOR.0",
-		.offset	= 0,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct physmap_flash_data autcpu12_flash_pdata = {
-	.width		= 4,
-	.parts		= autcpu12_flash_partitions,
-	.nr_parts	= ARRAY_SIZE(autcpu12_flash_partitions),
-};
-
-static struct resource autcpu12_flash_resources[] __initdata = {
-	DEFINE_RES_MEM(AUTCPU12_FLASH_BASE, SZ_8M),
-};
-
-static struct platform_device autcpu12_flash_pdev __initdata = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.resource	= autcpu12_flash_resources,
-	.num_resources	= ARRAY_SIZE(autcpu12_flash_resources),
-	.dev		= {
-		.platform_data	= &autcpu12_flash_pdata,
-	},
-};
-
-static struct resource autcpu12_nvram_resource[] __initdata = {
-	DEFINE_RES_MEM(AUTCPU12_NVRAM_BASE, 0),
-};
-
-static struct platdata_mtd_ram autcpu12_nvram_pdata = {
-	.bankwidth	= 4,
-};
-
-static struct platform_device autcpu12_nvram_pdev __initdata = {
-	.name		= "mtd-ram",
-	.id		= 0,
-	.resource	= autcpu12_nvram_resource,
-	.num_resources	= ARRAY_SIZE(autcpu12_nvram_resource),
-	.dev		= {
-		.platform_data	= &autcpu12_nvram_pdata,
-	},
-};
-
-static void __init autcpu12_nvram_init(void)
-{
-	void __iomem *nvram;
-	unsigned int save[2];
-	resource_size_t nvram_size = SZ_128K;
-
-	/*
-	 * Check for 32K/128K
-	 * Read ofs 0K
-	 * Read ofs 64K
-	 * Write complement to ofs 64K
-	 * Read and check result on ofs 0K
-	 * Restore contents
-	 */
-	nvram = ioremap(autcpu12_nvram_resource[0].start, SZ_128K);
-	if (nvram) {
-		save[0] = readl(nvram + 0);
-		save[1] = readl(nvram + SZ_64K);
-		writel(~save[0], nvram + SZ_64K);
-		if (readl(nvram + 0) != save[0]) {
-			writel(save[0], nvram + 0);
-			nvram_size = SZ_32K;
-		} else
-			writel(save[1], nvram + SZ_64K);
-		iounmap(nvram);
-
-		autcpu12_nvram_resource[0].end =
-			autcpu12_nvram_resource[0].start + nvram_size - 1;
-		platform_device_register(&autcpu12_nvram_pdev);
-	} else
-		pr_err("Failed to remap NVRAM resource\n");
-}
-
-static void __init autcpu12_init(void)
-{
-	clps711x_devices_init();
-	platform_device_register(&autcpu12_flash_pdev);
-	platform_device_register_simple("video-clps711x", 0, NULL, 0);
-	platform_device_register_simple("cs89x0", 0, autcpu12_cs8900_resource,
-					ARRAY_SIZE(autcpu12_cs8900_resource));
-	platform_device_register(&autcpu12_mmgpio_pdev);
-	autcpu12_nvram_init();
-}
-
-static void __init autcpu12_init_late(void)
-{
-	gpio_request_array(autcpu12_gpios, ARRAY_SIZE(autcpu12_gpios));
-	platform_device_register(&autcpu12_nand_pdev);
-}
-
-MACHINE_START(AUTCPU12, "autronix autcpu12")
-	/* Maintainer: Thomas Gleixner */
-	.atag_offset	= 0x20000,
-	.map_io		= clps711x_map_io,
-	.init_irq	= clps711x_init_irq,
-	.init_time	= clps711x_timer_init,
-	.init_machine	= autcpu12_init,
-	.init_late	= autcpu12_init_late,
-	.restart	= clps711x_restart,
-MACHINE_END
-
diff --git a/arch/arm/mach-clps711x/board-cdb89712.c b/arch/arm/mach-clps711x/board-cdb89712.c
deleted file mode 100644
index 972abdb..0000000
--- a/arch/arm/mach-clps711x/board-cdb89712.c
+++ /dev/null
@@ -1,147 +0,0 @@
-/*
- *  linux/arch/arm/mach-clps711x/cdb89712.c
- *
- *  Copyright (C) 2000-2001 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/io.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/plat-ram.h>
-#include <linux/mtd/partitions.h>
-
-#include <mach/hardware.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include "devices.h"
-
-#define CDB89712_CS8900_BASE	(CS2_PHYS_BASE + 0x300)
-#define CDB89712_CS8900_IRQ	(IRQ_EINT3)
-
-static struct resource cdb89712_cs8900_resource[] __initdata = {
-	DEFINE_RES_MEM(CDB89712_CS8900_BASE, SZ_1K),
-	DEFINE_RES_IRQ(CDB89712_CS8900_IRQ),
-};
-
-static struct mtd_partition cdb89712_flash_partitions[] __initdata = {
-	{
-		.name	= "Flash",
-		.offset	= 0,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct physmap_flash_data cdb89712_flash_pdata __initdata = {
-	.width		= 4,
-	.probe_type	= "map_rom",
-	.parts		= cdb89712_flash_partitions,
-	.nr_parts	= ARRAY_SIZE(cdb89712_flash_partitions),
-};
-
-static struct resource cdb89712_flash_resources[] __initdata = {
-	DEFINE_RES_MEM(CS0_PHYS_BASE, SZ_8M),
-};
-
-static struct platform_device cdb89712_flash_pdev __initdata = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.resource	= cdb89712_flash_resources,
-	.num_resources	= ARRAY_SIZE(cdb89712_flash_resources),
-	.dev	= {
-		.platform_data	= &cdb89712_flash_pdata,
-	},
-};
-
-static struct mtd_partition cdb89712_bootrom_partitions[] __initdata = {
-	{
-		.name	= "BootROM",
-		.offset	= 0,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct physmap_flash_data cdb89712_bootrom_pdata __initdata = {
-	.width		= 4,
-	.probe_type	= "map_rom",
-	.parts		= cdb89712_bootrom_partitions,
-	.nr_parts	= ARRAY_SIZE(cdb89712_bootrom_partitions),
-};
-
-static struct resource cdb89712_bootrom_resources[] __initdata = {
-	DEFINE_RES_NAMED(CS7_PHYS_BASE, SZ_128, "BOOTROM", IORESOURCE_MEM |
-			 IORESOURCE_READONLY),
-};
-
-static struct platform_device cdb89712_bootrom_pdev __initdata = {
-	.name		= "physmap-flash",
-	.id		= 1,
-	.resource	= cdb89712_bootrom_resources,
-	.num_resources	= ARRAY_SIZE(cdb89712_bootrom_resources),
-	.dev	= {
-		.platform_data	= &cdb89712_bootrom_pdata,
-	},
-};
-
-static struct platdata_mtd_ram cdb89712_sram_pdata __initdata = {
-	.bankwidth	= 4,
-};
-
-static struct resource cdb89712_sram_resources[] __initdata = {
-	DEFINE_RES_MEM(CLPS711X_SRAM_BASE, CLPS711X_SRAM_SIZE),
-};
-
-static struct platform_device cdb89712_sram_pdev __initdata = {
-	.name		= "mtd-ram",
-	.id		= 0,
-	.resource	= cdb89712_sram_resources,
-	.num_resources	= ARRAY_SIZE(cdb89712_sram_resources),
-	.dev	= {
-		.platform_data	= &cdb89712_sram_pdata,
-	},
-};
-
-static void __init cdb89712_init(void)
-{
-	clps711x_devices_init();
-	platform_device_register(&cdb89712_flash_pdev);
-	platform_device_register(&cdb89712_bootrom_pdev);
-	platform_device_register(&cdb89712_sram_pdev);
-	platform_device_register_simple("cs89x0", 0, cdb89712_cs8900_resource,
-					ARRAY_SIZE(cdb89712_cs8900_resource));
-}
-
-MACHINE_START(CDB89712, "Cirrus-CDB89712")
-	/* Maintainer: Ray Lehtiniemi */
-	.atag_offset	= 0x100,
-	.map_io		= clps711x_map_io,
-	.init_irq	= clps711x_init_irq,
-	.init_time	= clps711x_timer_init,
-	.init_machine	= cdb89712_init,
-	.restart	= clps711x_restart,
-MACHINE_END
diff --git a/arch/arm/mach-clps711x/board-clep7312.c b/arch/arm/mach-clps711x/board-clep7312.c
deleted file mode 100644
index f9ca22b..0000000
--- a/arch/arm/mach-clps711x/board-clep7312.c
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- *  linux/arch/arm/mach-clps711x/clep7312.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/memblock.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "common.h"
-#include "devices.h"
-
-static void __init
-fixup_clep7312(struct tag *tags, char **cmdline)
-{
-	memblock_add(0xc0000000, 0x01000000);
-}
-
-MACHINE_START(CLEP7212, "Cirrus Logic 7212/7312")
-	/* Maintainer: Nobody */
-	.atag_offset	= 0x0100,
-	.fixup		= fixup_clep7312,
-	.map_io		= clps711x_map_io,
-	.init_irq	= clps711x_init_irq,
-	.init_time	= clps711x_timer_init,
-	.init_machine	= clps711x_devices_init,
-	.restart	= clps711x_restart,
-MACHINE_END
diff --git a/arch/arm/mach-clps711x/board-edb7211.c b/arch/arm/mach-clps711x/board-edb7211.c
deleted file mode 100644
index f339797..0000000
--- a/arch/arm/mach-clps711x/board-edb7211.c
+++ /dev/null
@@ -1,188 +0,0 @@
-/*
- *  Copyright (C) 2000, 2001 Blue Mug, Inc.  All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/memblock.h>
-#include <linux/types.h>
-#include <linux/i2c-gpio.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/pwm.h>
-#include <linux/pwm_backlight.h>
-#include <linux/memblock.h>
-
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/setup.h>
-#include <asm/mach/map.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <video/platform_lcd.h>
-
-#include <mach/hardware.h>
-
-#include "common.h"
-#include "devices.h"
-
-#define VIDEORAM_SIZE		SZ_128K
-
-#define EDB7211_LCD_DC_DC_EN	CLPS711X_GPIO(3, 1)
-#define EDB7211_LCDEN		CLPS711X_GPIO(3, 2)
-#define EDB7211_LCDBL		CLPS711X_GPIO(3, 3)
-
-#define EDB7211_I2C_SDA		CLPS711X_GPIO(3, 4)
-#define EDB7211_I2C_SCL		CLPS711X_GPIO(3, 5)
-
-#define EDB7211_FLASH0_BASE	(CS0_PHYS_BASE)
-#define EDB7211_FLASH1_BASE	(CS1_PHYS_BASE)
-
-#define EDB7211_CS8900_BASE	(CS2_PHYS_BASE + 0x300)
-#define EDB7211_CS8900_IRQ	(IRQ_EINT3)
-
-/* The extra 8 lines of the keyboard matrix */
-#define EDB7211_EXTKBD_BASE	(CS3_PHYS_BASE)
-
-static struct i2c_gpio_platform_data edb7211_i2c_pdata __initdata = {
-	.sda_pin	= EDB7211_I2C_SDA,
-	.scl_pin	= EDB7211_I2C_SCL,
-	.scl_is_output_only = 1,
-};
-
-static struct resource edb7211_cs8900_resource[] __initdata = {
-	DEFINE_RES_MEM(EDB7211_CS8900_BASE, SZ_1K),
-	DEFINE_RES_IRQ(EDB7211_CS8900_IRQ),
-};
-
-static struct mtd_partition edb7211_flash_partitions[] __initdata = {
-	{
-		.name	= "Flash",
-		.offset	= 0,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct physmap_flash_data edb7211_flash_pdata __initdata = {
-	.width		= 4,
-	.parts		= edb7211_flash_partitions,
-	.nr_parts	= ARRAY_SIZE(edb7211_flash_partitions),
-};
-
-static struct resource edb7211_flash_resources[] __initdata = {
-	DEFINE_RES_MEM(EDB7211_FLASH0_BASE, SZ_8M),
-	DEFINE_RES_MEM(EDB7211_FLASH1_BASE, SZ_8M),
-};
-
-static struct platform_device edb7211_flash_pdev __initdata = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.resource	= edb7211_flash_resources,
-	.num_resources	= ARRAY_SIZE(edb7211_flash_resources),
-	.dev	= {
-		.platform_data	= &edb7211_flash_pdata,
-	},
-};
-
-static void edb7211_lcd_power_set(struct plat_lcd_data *pd, unsigned int power)
-{
-	if (power) {
-		gpio_set_value(EDB7211_LCDEN, 1);
-		udelay(100);
-		gpio_set_value(EDB7211_LCD_DC_DC_EN, 1);
-	} else {
-		gpio_set_value(EDB7211_LCD_DC_DC_EN, 0);
-		udelay(100);
-		gpio_set_value(EDB7211_LCDEN, 0);
-	}
-}
-
-static struct plat_lcd_data edb7211_lcd_power_pdata = {
-	.set_power	= edb7211_lcd_power_set,
-};
-
-static struct pwm_lookup edb7211_pwm_lookup[] = {
-	PWM_LOOKUP("clps711x-pwm", 0, "pwm-backlight.0", NULL,
-		   0, PWM_POLARITY_NORMAL),
-};
-
-static struct platform_pwm_backlight_data pwm_bl_pdata = {
-	.dft_brightness	= 0x01,
-	.max_brightness	= 0x0f,
-	.enable_gpio	= EDB7211_LCDBL,
-};
-
-static struct resource clps711x_pwm_res =
-	DEFINE_RES_MEM(CLPS711X_PHYS_BASE + PMPCON, SZ_4);
-
-static struct gpio edb7211_gpios[] __initconst = {
-	{ EDB7211_LCD_DC_DC_EN,	GPIOF_OUT_INIT_LOW,	"LCD DC-DC" },
-	{ EDB7211_LCDEN,	GPIOF_OUT_INIT_LOW,	"LCD POWER" },
-};
-
-/* Reserve screen memory region at the start of main system memory. */
-static void __init edb7211_reserve(void)
-{
-	memblock_reserve(PHYS_OFFSET, VIDEORAM_SIZE);
-}
-
-static void __init
-fixup_edb7211(struct tag *tags, char **cmdline)
-{
-	/*
-	 * Bank start addresses are not present in the information
-	 * passed in from the boot loader.  We could potentially
-	 * detect them, but instead we hard-code them.
-	 *
-	 * Banks sizes _are_ present in the param block, but we're
-	 * not using that information yet.
-	 */
-	memblock_add(0xc0000000, SZ_8M);
-	memblock_add(0xc1000000, SZ_8M);
-}
-
-static void __init edb7211_init_late(void)
-{
-	gpio_request_array(edb7211_gpios, ARRAY_SIZE(edb7211_gpios));
-
-	platform_device_register(&edb7211_flash_pdev);
-
-	platform_device_register_data(NULL, "platform-lcd", 0,
-				      &edb7211_lcd_power_pdata,
-				      sizeof(edb7211_lcd_power_pdata));
-
-	platform_device_register_simple("clps711x-pwm", PLATFORM_DEVID_NONE,
-					&clps711x_pwm_res, 1);
-	pwm_add_table(edb7211_pwm_lookup, ARRAY_SIZE(edb7211_pwm_lookup));
-
-	platform_device_register_data(&platform_bus, "pwm-backlight", 0,
-				      &pwm_bl_pdata, sizeof(pwm_bl_pdata));
-
-	platform_device_register_simple("video-clps711x", 0, NULL, 0);
-	platform_device_register_simple("cs89x0", 0, edb7211_cs8900_resource,
-					ARRAY_SIZE(edb7211_cs8900_resource));
-	platform_device_register_data(NULL, "i2c-gpio", 0,
-				      &edb7211_i2c_pdata,
-				      sizeof(edb7211_i2c_pdata));
-}
-
-MACHINE_START(EDB7211, "CL-EDB7211 (EP7211 eval board)")
-	/* Maintainer: Jon McClintock */
-	.atag_offset	= VIDEORAM_SIZE + 0x100,
-	.fixup		= fixup_edb7211,
-	.reserve	= edb7211_reserve,
-	.map_io		= clps711x_map_io,
-	.init_irq	= clps711x_init_irq,
-	.init_time	= clps711x_timer_init,
-	.init_machine	= clps711x_devices_init,
-	.init_late	= edb7211_init_late,
-	.restart	= clps711x_restart,
-MACHINE_END
diff --git a/arch/arm/mach-clps711x/board-p720t.c b/arch/arm/mach-clps711x/board-p720t.c
deleted file mode 100644
index 80a16a8..0000000
--- a/arch/arm/mach-clps711x/board-p720t.c
+++ /dev/null
@@ -1,373 +0,0 @@
-/*
- *  linux/arch/arm/mach-clps711x/p720t.c
- *
- *  Copyright (C) 2000-2001 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/slab.h>
-#include <linux/leds.h>
-#include <linux/sizes.h>
-#include <linux/backlight.h>
-#include <linux/gpio/driver.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/nand-gpio.h>
-
-#include <mach/hardware.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <video/platform_lcd.h>
-
-#include "common.h"
-#include "devices.h"
-
-#define P720T_USERLED		CLPS711X_GPIO(3, 0)
-#define P720T_NAND_CLE		CLPS711X_GPIO(4, 0)
-#define P720T_NAND_ALE		CLPS711X_GPIO(4, 1)
-#define P720T_NAND_NCE		CLPS711X_GPIO(4, 2)
-
-#define P720T_NAND_BASE		(CLPS711X_SDRAM1_BASE)
-
-#define P720T_MMGPIO_BASE	(CLPS711X_NR_GPIO)
-
-#define SYSPLD_PHYS_BASE	IOMEM(CS1_PHYS_BASE)
-
-#define PLD_INT			(SYSPLD_PHYS_BASE + 0x000000)
-#define PLD_INT_MMGPIO_BASE	(P720T_MMGPIO_BASE + 0)
-#define PLD_INT_PENIRQ		(PLD_INT_MMGPIO_BASE + 5)
-#define PLD_INT_UCB_IRQ		(PLD_INT_MMGPIO_BASE + 1)
-#define PLD_INT_KBD_ATN		(PLD_INT_MMGPIO_BASE + 0) /* EINT1 */
-
-#define PLD_PWR			(SYSPLD_PHYS_BASE + 0x000004)
-#define PLD_PWR_MMGPIO_BASE	(P720T_MMGPIO_BASE + 8)
-#define PLD_PWR_EXT		(PLD_PWR_MMGPIO_BASE + 5)
-#define PLD_PWR_MODE		(PLD_PWR_MMGPIO_BASE + 4) /* 1 = PWM, 0 = PFM */
-#define PLD_S4_ON		(PLD_PWR_MMGPIO_BASE + 3) /* LCD bias voltage enable */
-#define PLD_S3_ON		(PLD_PWR_MMGPIO_BASE + 2) /* LCD backlight enable */
-#define PLD_S2_ON		(PLD_PWR_MMGPIO_BASE + 1) /* LCD 3V3 supply enable */
-#define PLD_S1_ON		(PLD_PWR_MMGPIO_BASE + 0) /* LCD 3V supply enable */
-
-#define PLD_KBD			(SYSPLD_PHYS_BASE + 0x000008)
-#define PLD_KBD_MMGPIO_BASE	(P720T_MMGPIO_BASE + 16)
-#define PLD_KBD_WAKE		(PLD_KBD_MMGPIO_BASE + 1)
-#define PLD_KBD_EN		(PLD_KBD_MMGPIO_BASE + 0)
-
-#define PLD_SPI			(SYSPLD_PHYS_BASE + 0x00000c)
-#define PLD_SPI_MMGPIO_BASE	(P720T_MMGPIO_BASE + 24)
-#define PLD_SPI_EN		(PLD_SPI_MMGPIO_BASE + 0)
-
-#define PLD_IO			(SYSPLD_PHYS_BASE + 0x000010)
-#define PLD_IO_MMGPIO_BASE	(P720T_MMGPIO_BASE + 32)
-#define PLD_IO_BOOTSEL		(PLD_IO_MMGPIO_BASE + 6) /* Boot sel switch */
-#define PLD_IO_USER		(PLD_IO_MMGPIO_BASE + 5) /* User defined switch */
-#define PLD_IO_LED3		(PLD_IO_MMGPIO_BASE + 4)
-#define PLD_IO_LED2		(PLD_IO_MMGPIO_BASE + 3)
-#define PLD_IO_LED1		(PLD_IO_MMGPIO_BASE + 2)
-#define PLD_IO_LED0		(PLD_IO_MMGPIO_BASE + 1)
-#define PLD_IO_LEDEN		(PLD_IO_MMGPIO_BASE + 0)
-
-#define PLD_IRDA		(SYSPLD_PHYS_BASE + 0x000014)
-#define PLD_IRDA_MMGPIO_BASE	(P720T_MMGPIO_BASE + 40)
-#define PLD_IRDA_EN		(PLD_IRDA_MMGPIO_BASE + 0)
-
-#define PLD_COM2		(SYSPLD_PHYS_BASE + 0x000018)
-#define PLD_COM2_MMGPIO_BASE	(P720T_MMGPIO_BASE + 48)
-#define PLD_COM2_EN		(PLD_COM2_MMGPIO_BASE + 0)
-
-#define PLD_COM1		(SYSPLD_PHYS_BASE + 0x00001c)
-#define PLD_COM1_MMGPIO_BASE	(P720T_MMGPIO_BASE + 56)
-#define PLD_COM1_EN		(PLD_COM1_MMGPIO_BASE + 0)
-
-#define PLD_AUD			(SYSPLD_PHYS_BASE + 0x000020)
-#define PLD_AUD_MMGPIO_BASE	(P720T_MMGPIO_BASE + 64)
-#define PLD_AUD_DIV1		(PLD_AUD_MMGPIO_BASE + 6)
-#define PLD_AUD_DIV0		(PLD_AUD_MMGPIO_BASE + 5)
-#define PLD_AUD_CLK_SEL1	(PLD_AUD_MMGPIO_BASE + 4)
-#define PLD_AUD_CLK_SEL0	(PLD_AUD_MMGPIO_BASE + 3)
-#define PLD_AUD_MIC_PWR		(PLD_AUD_MMGPIO_BASE + 2)
-#define PLD_AUD_MIC_GAIN	(PLD_AUD_MMGPIO_BASE + 1)
-#define PLD_AUD_CODEC_EN	(PLD_AUD_MMGPIO_BASE + 0)
-
-#define PLD_CF			(SYSPLD_PHYS_BASE + 0x000024)
-#define PLD_CF_MMGPIO_BASE	(P720T_MMGPIO_BASE + 72)
-#define PLD_CF2_SLEEP		(PLD_CF_MMGPIO_BASE + 5)
-#define PLD_CF1_SLEEP		(PLD_CF_MMGPIO_BASE + 4)
-#define PLD_CF2_nPDREQ		(PLD_CF_MMGPIO_BASE + 3)
-#define PLD_CF1_nPDREQ		(PLD_CF_MMGPIO_BASE + 2)
-#define PLD_CF2_nIRQ		(PLD_CF_MMGPIO_BASE + 1)
-#define PLD_CF1_nIRQ		(PLD_CF_MMGPIO_BASE + 0)
-
-#define PLD_SDC			(SYSPLD_PHYS_BASE + 0x000028)
-#define PLD_SDC_MMGPIO_BASE	(P720T_MMGPIO_BASE + 80)
-#define PLD_SDC_INT_EN		(PLD_SDC_MMGPIO_BASE + 2)
-#define PLD_SDC_WP		(PLD_SDC_MMGPIO_BASE + 1)
-#define PLD_SDC_CD		(PLD_SDC_MMGPIO_BASE + 0)
-
-#define PLD_CODEC		(SYSPLD_PHYS_BASE + 0x400000)
-#define PLD_CODEC_MMGPIO_BASE	(P720T_MMGPIO_BASE + 88)
-#define PLD_CODEC_IRQ3		(PLD_CODEC_MMGPIO_BASE + 4)
-#define PLD_CODEC_IRQ2		(PLD_CODEC_MMGPIO_BASE + 3)
-#define PLD_CODEC_IRQ1		(PLD_CODEC_MMGPIO_BASE + 2)
-#define PLD_CODEC_EN		(PLD_CODEC_MMGPIO_BASE + 0)
-
-#define PLD_BRITE		(SYSPLD_PHYS_BASE + 0x400004)
-#define PLD_BRITE_MMGPIO_BASE	(P720T_MMGPIO_BASE + 96)
-#define PLD_BRITE_UP		(PLD_BRITE_MMGPIO_BASE + 1)
-#define PLD_BRITE_DN		(PLD_BRITE_MMGPIO_BASE + 0)
-
-#define PLD_LCDEN		(SYSPLD_PHYS_BASE + 0x400008)
-#define PLD_LCDEN_MMGPIO_BASE	(P720T_MMGPIO_BASE + 104)
-#define PLD_LCDEN_EN		(PLD_LCDEN_MMGPIO_BASE + 0)
-
-#define PLD_TCH			(SYSPLD_PHYS_BASE + 0x400010)
-#define PLD_TCH_MMGPIO_BASE	(P720T_MMGPIO_BASE + 112)
-#define PLD_TCH_PENIRQ		(PLD_TCH_MMGPIO_BASE + 1)
-#define PLD_TCH_EN		(PLD_TCH_MMGPIO_BASE + 0)
-
-#define PLD_GPIO		(SYSPLD_PHYS_BASE + 0x400014)
-#define PLD_GPIO_MMGPIO_BASE	(P720T_MMGPIO_BASE + 120)
-#define PLD_GPIO2		(PLD_GPIO_MMGPIO_BASE + 2)
-#define PLD_GPIO1		(PLD_GPIO_MMGPIO_BASE + 1)
-#define PLD_GPIO0		(PLD_GPIO_MMGPIO_BASE + 0)
-
-static struct gpio p720t_gpios[] __initconst = {
-	{ PLD_S1_ON,	GPIOF_OUT_INIT_LOW,	"PLD_S1_ON" },
-	{ PLD_S2_ON,	GPIOF_OUT_INIT_LOW,	"PLD_S2_ON" },
-	{ PLD_S3_ON,	GPIOF_OUT_INIT_LOW,	"PLD_S3_ON" },
-	{ PLD_S4_ON,	GPIOF_OUT_INIT_LOW,	"PLD_S4_ON" },
-	{ PLD_KBD_EN,	GPIOF_OUT_INIT_LOW,	"PLD_KBD_EN" },
-	{ PLD_SPI_EN,	GPIOF_OUT_INIT_LOW,	"PLD_SPI_EN" },
-	{ PLD_IO_USER,	GPIOF_OUT_INIT_LOW,	"PLD_IO_USER" },
-	{ PLD_IO_LED0,	GPIOF_OUT_INIT_LOW,	"PLD_IO_LED0" },
-	{ PLD_IO_LED1,	GPIOF_OUT_INIT_LOW,	"PLD_IO_LED1" },
-	{ PLD_IO_LED2,	GPIOF_OUT_INIT_LOW,	"PLD_IO_LED2" },
-	{ PLD_IO_LED3,	GPIOF_OUT_INIT_LOW,	"PLD_IO_LED3" },
-	{ PLD_IO_LEDEN,	GPIOF_OUT_INIT_LOW,	"PLD_IO_LEDEN" },
-	{ PLD_IRDA_EN,	GPIOF_OUT_INIT_LOW,	"PLD_IRDA_EN" },
-	{ PLD_COM1_EN,	GPIOF_OUT_INIT_HIGH,	"PLD_COM1_EN" },
-	{ PLD_COM2_EN,	GPIOF_OUT_INIT_HIGH,	"PLD_COM2_EN" },
-	{ PLD_CODEC_EN,	GPIOF_OUT_INIT_LOW,	"PLD_CODEC_EN" },
-	{ PLD_LCDEN_EN,	GPIOF_OUT_INIT_LOW,	"PLD_LCDEN_EN" },
-	{ PLD_TCH_EN,	GPIOF_OUT_INIT_LOW,	"PLD_TCH_EN" },
-	{ P720T_USERLED,GPIOF_OUT_INIT_LOW,	"USER_LED" },
-};
-
-static struct resource p720t_mmgpio_resource[] __initdata = {
-	DEFINE_RES_MEM_NAMED(0, 4, "dat"),
-};
-
-static struct bgpio_pdata p720t_mmgpio_pdata = {
-	.ngpio	= 8,
-};
-
-static struct platform_device p720t_mmgpio __initdata = {
-	.name		= "basic-mmio-gpio",
-	.id		= -1,
-	.resource	= p720t_mmgpio_resource,
-	.num_resources	= ARRAY_SIZE(p720t_mmgpio_resource),
-	.dev		= {
-		.platform_data	= &p720t_mmgpio_pdata,
-	},
-};
-
-static void __init p720t_mmgpio_init(void __iomem *addrbase, int gpiobase)
-{
-	p720t_mmgpio_resource[0].start = (unsigned long)addrbase;
-	p720t_mmgpio_pdata.base = gpiobase;
-
-	platform_device_register(&p720t_mmgpio);
-}
-
-static struct {
-	void __iomem	*addrbase;
-	int		gpiobase;
-} mmgpios[] __initconst = {
-	{ PLD_INT,	PLD_INT_MMGPIO_BASE },
-	{ PLD_PWR,	PLD_PWR_MMGPIO_BASE },
-	{ PLD_KBD,	PLD_KBD_MMGPIO_BASE },
-	{ PLD_SPI,	PLD_SPI_MMGPIO_BASE },
-	{ PLD_IO,	PLD_IO_MMGPIO_BASE },
-	{ PLD_IRDA,	PLD_IRDA_MMGPIO_BASE },
-	{ PLD_COM2,	PLD_COM2_MMGPIO_BASE },
-	{ PLD_COM1,	PLD_COM1_MMGPIO_BASE },
-	{ PLD_AUD,	PLD_AUD_MMGPIO_BASE },
-	{ PLD_CF,	PLD_CF_MMGPIO_BASE },
-	{ PLD_SDC,	PLD_SDC_MMGPIO_BASE },
-	{ PLD_CODEC,	PLD_CODEC_MMGPIO_BASE },
-	{ PLD_BRITE,	PLD_BRITE_MMGPIO_BASE },
-	{ PLD_LCDEN,	PLD_LCDEN_MMGPIO_BASE },
-	{ PLD_TCH,	PLD_TCH_MMGPIO_BASE },
-	{ PLD_GPIO,	PLD_GPIO_MMGPIO_BASE },
-};
-
-static struct resource p720t_nand_resource[] __initdata = {
-	DEFINE_RES_MEM(P720T_NAND_BASE, SZ_4),
-};
-
-static struct mtd_partition p720t_nand_parts[] __initdata = {
-	{
-		.name	= "Flash partition 1",
-		.offset	= 0,
-		.size	= SZ_2M,
-	},
-	{
-		.name	= "Flash partition 2",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct gpio_nand_platdata p720t_nand_pdata __initdata = {
-	.gpio_rdy	= -1,
-	.gpio_nce	= P720T_NAND_NCE,
-	.gpio_ale	= P720T_NAND_ALE,
-	.gpio_cle	= P720T_NAND_CLE,
-	.gpio_nwp	= -1,
-	.chip_delay	= 15,
-	.parts		= p720t_nand_parts,
-	.num_parts	= ARRAY_SIZE(p720t_nand_parts),
-};
-
-static struct platform_device p720t_nand_pdev __initdata = {
-	.name		= "gpio-nand",
-	.id		= -1,
-	.resource	= p720t_nand_resource,
-	.num_resources	= ARRAY_SIZE(p720t_nand_resource),
-	.dev		= {
-		.platform_data = &p720t_nand_pdata,
-	},
-};
-
-static void p720t_lcd_power_set(struct plat_lcd_data *pd, unsigned int power)
-{
-	if (power) {
-		gpio_set_value(PLD_LCDEN_EN, 1);
-		gpio_set_value(PLD_S1_ON, 1);
-		gpio_set_value(PLD_S2_ON, 1);
-		gpio_set_value(PLD_S4_ON, 1);
-	} else {
-		gpio_set_value(PLD_S1_ON, 0);
-		gpio_set_value(PLD_S2_ON, 0);
-		gpio_set_value(PLD_S4_ON, 0);
-		gpio_set_value(PLD_LCDEN_EN, 0);
-	}
-}
-
-static struct plat_lcd_data p720t_lcd_power_pdata = {
-	.set_power	= p720t_lcd_power_set,
-};
-
-static void p720t_lcd_backlight_set_intensity(int intensity)
-{
-	gpio_set_value(PLD_S3_ON, intensity);
-}
-
-static struct generic_bl_info p720t_lcd_backlight_pdata = {
-	.name			= "lcd-backlight.0",
-	.default_intensity	= 0x01,
-	.max_intensity		= 0x01,
-	.set_bl_intensity	= p720t_lcd_backlight_set_intensity,
-};
-
-static void __init
-fixup_p720t(struct tag *tag, char **cmdline)
-{
-	/*
-	 * Our bootloader doesn't setup any tags (yet).
-	 */
-	if (tag->hdr.tag != ATAG_CORE) {
-		tag->hdr.tag = ATAG_CORE;
-		tag->hdr.size = tag_size(tag_core);
-		tag->u.core.flags = 0;
-		tag->u.core.pagesize = PAGE_SIZE;
-		tag->u.core.rootdev = 0x0100;
-
-		tag = tag_next(tag);
-		tag->hdr.tag = ATAG_MEM;
-		tag->hdr.size = tag_size(tag_mem32);
-		tag->u.mem.size = 4096;
-		tag->u.mem.start = PHYS_OFFSET;
-
-		tag = tag_next(tag);
-		tag->hdr.tag = ATAG_NONE;
-		tag->hdr.size = 0;
-	}
-}
-
-static struct gpio_led p720t_gpio_leds[] = {
-	{
-		.name			= "User LED",
-		.default_trigger	= "heartbeat",
-		.gpio			= P720T_USERLED,
-	},
-};
-
-static struct gpio_led_platform_data p720t_gpio_led_pdata __initdata = {
-	.leds		= p720t_gpio_leds,
-	.num_leds	= ARRAY_SIZE(p720t_gpio_leds),
-};
-
-static void __init p720t_init(void)
-{
-	int i;
-
-	clps711x_devices_init();
-
-	for (i = 0; i < ARRAY_SIZE(mmgpios); i++)
-		p720t_mmgpio_init(mmgpios[i].addrbase, mmgpios[i].gpiobase);
-
-	platform_device_register(&p720t_nand_pdev);
-}
-
-static void __init p720t_init_late(void)
-{
-	WARN_ON(gpio_request_array(p720t_gpios, ARRAY_SIZE(p720t_gpios)));
-
-	platform_device_register_data(NULL, "platform-lcd", 0,
-				      &p720t_lcd_power_pdata,
-				      sizeof(p720t_lcd_power_pdata));
-	platform_device_register_data(NULL, "generic-bl", 0,
-				      &p720t_lcd_backlight_pdata,
-				      sizeof(p720t_lcd_backlight_pdata));
-	platform_device_register_simple("video-clps711x", 0, NULL, 0);
-	platform_device_register_data(NULL, "leds-gpio", 0,
-				      &p720t_gpio_led_pdata,
-				      sizeof(p720t_gpio_led_pdata));
-}
-
-MACHINE_START(P720T, "ARM-Prospector720T")
-	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.atag_offset	= 0x100,
-	.fixup		= fixup_p720t,
-	.map_io		= clps711x_map_io,
-	.init_irq	= clps711x_init_irq,
-	.init_time	= clps711x_timer_init,
-	.init_machine	= p720t_init,
-	.init_late	= p720t_init_late,
-	.restart	= clps711x_restart,
-MACHINE_END
diff --git a/arch/arm/mach-clps711x/common.c b/arch/arm/mach-clps711x/common.c
deleted file mode 100644
index 6466da8..0000000
--- a/arch/arm/mach-clps711x/common.c
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- *  linux/arch/arm/mach-clps711x/core.c
- *
- *  Core support for the CLPS711x-based machines.
- *
- *  Copyright (C) 2001,2011 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/init.h>
-#include <linux/sizes.h>
-
-#include <asm/mach/map.h>
-#include <asm/system_misc.h>
-
-#include <mach/hardware.h>
-
-#include "common.h"
-
-/*
- * This maps the generic CLPS711x registers
- */
-static struct map_desc clps711x_io_desc[] __initdata = {
-	{
-		.virtual	= (unsigned long)CLPS711X_VIRT_BASE,
-		.pfn		= __phys_to_pfn(CLPS711X_PHYS_BASE),
-		.length		= 48 * SZ_1K,
-		.type		= MT_DEVICE,
-	}
-};
-
-void __init clps711x_map_io(void)
-{
-	iotable_init(clps711x_io_desc, ARRAY_SIZE(clps711x_io_desc));
-}
-
-void __init clps711x_init_irq(void)
-{
-	clps711x_intc_init(CLPS711X_PHYS_BASE, SZ_16K);
-}
-
-void __init clps711x_timer_init(void)
-{
-	clps711x_clk_init(CLPS711X_VIRT_BASE);
-	clps711x_clksrc_init(CLPS711X_VIRT_BASE + TC1D,
-			     CLPS711X_VIRT_BASE + TC2D, IRQ_TC2OI);
-}
-
-void clps711x_restart(enum reboot_mode mode, const char *cmd)
-{
-	soft_restart(0);
-}
diff --git a/arch/arm/mach-clps711x/common.h b/arch/arm/mach-clps711x/common.h
deleted file mode 100644
index 370200b..0000000
--- a/arch/arm/mach-clps711x/common.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * linux/arch/arm/mach-clps711x/common.h
- *
- * Common bits.
- */
-
-#include <linux/reboot.h>
-
-#define CLPS711X_NR_GPIO	(4 * 8 + 3)
-#define CLPS711X_GPIO(prt, bit)	((prt) * 8 + (bit))
-
-extern void clps711x_map_io(void);
-extern void clps711x_init_irq(void);
-extern void clps711x_timer_init(void);
-extern void clps711x_restart(enum reboot_mode mode, const char *cmd);
-
-/* drivers/irqchip/irq-clps711x.c */
-void clps711x_intc_init(phys_addr_t, resource_size_t);
-/* drivers/clk/clk-clps711x.c */
-void clps711x_clk_init(void __iomem *base);
-/* drivers/clocksource/clps711x-timer.c */
-void clps711x_clksrc_init(void __iomem *tc1_base, void __iomem *tc2_base,
-			  unsigned int irq);
diff --git a/arch/arm/mach-clps711x/devices.c b/arch/arm/mach-clps711x/devices.c
deleted file mode 100644
index 77a9617..0000000
--- a/arch/arm/mach-clps711x/devices.c
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- *  CLPS711X common devices definitions
- *
- *  Author: Alexander Shiyan <shc_work@mail.ru>, 2013-2014
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/io.h>
-#include <linux/of_fdt.h>
-#include <linux/platform_device.h>
-#include <linux/random.h>
-#include <linux/sizes.h>
-#include <linux/slab.h>
-#include <linux/sys_soc.h>
-
-#include <asm/system_info.h>
-
-#include <mach/hardware.h>
-
-static const struct resource clps711x_cpuidle_res __initconst =
-	DEFINE_RES_MEM(CLPS711X_PHYS_BASE + HALT, SZ_128);
-
-static void __init clps711x_add_cpuidle(void)
-{
-	platform_device_register_simple("clps711x-cpuidle", PLATFORM_DEVID_NONE,
-					&clps711x_cpuidle_res, 1);
-}
-
-static const phys_addr_t clps711x_gpios[][2] __initconst = {
-	{ PADR, PADDR },
-	{ PBDR, PBDDR },
-	{ PCDR, PCDDR },
-	{ PDDR, PDDDR },
-	{ PEDR, PEDDR },
-};
-
-static void __init clps711x_add_gpio(void)
-{
-	unsigned i;
-	struct resource gpio_res[2];
-
-	memset(gpio_res, 0, sizeof(gpio_res));
-
-	gpio_res[0].flags = IORESOURCE_MEM;
-	gpio_res[1].flags = IORESOURCE_MEM;
-
-	for (i = 0; i < ARRAY_SIZE(clps711x_gpios); i++) {
-		gpio_res[0].start = CLPS711X_PHYS_BASE + clps711x_gpios[i][0];
-		gpio_res[0].end = gpio_res[0].start;
-		gpio_res[1].start = CLPS711X_PHYS_BASE + clps711x_gpios[i][1];
-		gpio_res[1].end = gpio_res[1].start;
-
-		platform_device_register_simple("clps711x-gpio", i,
-						gpio_res, ARRAY_SIZE(gpio_res));
-	}
-}
-
-const struct resource clps711x_syscon_res[] __initconst = {
-	/* SYSCON1, SYSFLG1 */
-	DEFINE_RES_MEM(CLPS711X_PHYS_BASE + SYSCON1, SZ_128),
-	/* SYSCON2, SYSFLG2 */
-	DEFINE_RES_MEM(CLPS711X_PHYS_BASE + SYSCON2, SZ_128),
-	/* SYSCON3 */
-	DEFINE_RES_MEM(CLPS711X_PHYS_BASE + SYSCON3, SZ_64),
-};
-
-static void __init clps711x_add_syscon(void)
-{
-	unsigned i;
-
-	for (i = 0; i < ARRAY_SIZE(clps711x_syscon_res); i++)
-		platform_device_register_simple("syscon", i + 1,
-						&clps711x_syscon_res[i], 1);
-}
-
-static const struct resource clps711x_uart1_res[] __initconst = {
-	DEFINE_RES_MEM(CLPS711X_PHYS_BASE + UARTDR1, SZ_128),
-	DEFINE_RES_IRQ(IRQ_UTXINT1),
-	DEFINE_RES_IRQ(IRQ_URXINT1),
-};
-
-static const struct resource clps711x_uart2_res[] __initconst = {
-	DEFINE_RES_MEM(CLPS711X_PHYS_BASE + UARTDR2, SZ_128),
-	DEFINE_RES_IRQ(IRQ_UTXINT2),
-	DEFINE_RES_IRQ(IRQ_URXINT2),
-};
-
-static void __init clps711x_add_uart(void)
-{
-	platform_device_register_simple("clps711x-uart", 0, clps711x_uart1_res,
-					ARRAY_SIZE(clps711x_uart1_res));
-	platform_device_register_simple("clps711x-uart", 1, clps711x_uart2_res,
-					ARRAY_SIZE(clps711x_uart2_res));
-};
-
-static void __init clps711x_soc_init(void)
-{
-	struct soc_device_attribute *soc_dev_attr;
-	struct soc_device *soc_dev;
-	void __iomem *base;
-	u32 id[5];
-
-	base = ioremap(CLPS711X_PHYS_BASE, SZ_32K);
-	if (!base)
-		return;
-
-	id[0] = readl(base + UNIQID);
-	id[1] = readl(base + RANDID0);
-	id[2] = readl(base + RANDID1);
-	id[3] = readl(base + RANDID2);
-	id[4] = readl(base + RANDID3);
-	system_rev = SYSFLG1_VERID(readl(base + SYSFLG1));
-
-	add_device_randomness(id, sizeof(id));
-
-	system_serial_low = id[0];
-
-	soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
-	if (!soc_dev_attr)
-		goto out_unmap;
-
-	soc_dev_attr->machine = of_flat_dt_get_machine_name();
-	soc_dev_attr->family = "Cirrus Logic CLPS711X";
-	soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%u", system_rev);
-	soc_dev_attr->soc_id = kasprintf(GFP_KERNEL, "%08x", id[0]);
-
-	soc_dev = soc_device_register(soc_dev_attr);
-	if (IS_ERR(soc_dev)) {
-		kfree(soc_dev_attr->revision);
-		kfree(soc_dev_attr->soc_id);
-		kfree(soc_dev_attr);
-	}
-
-out_unmap:
-	iounmap(base);
-}
-
-void __init clps711x_devices_init(void)
-{
-	clps711x_add_cpuidle();
-	clps711x_add_gpio();
-	clps711x_add_syscon();
-	clps711x_add_uart();
-	clps711x_soc_init();
-}
diff --git a/arch/arm/mach-clps711x/devices.h b/arch/arm/mach-clps711x/devices.h
deleted file mode 100644
index a5efc17..0000000
--- a/arch/arm/mach-clps711x/devices.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/*
- *  CLPS711X common devices definitions
- *
- *  Copyright (C) 2013 Alexander Shiyan <shc_work@mail.ru>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-void clps711x_devices_init(void);
diff --git a/arch/arm/mach-cns3xxx/Kconfig b/arch/arm/mach-cns3xxx/Kconfig
index eb14a0f..5fd836b 100644
--- a/arch/arm/mach-cns3xxx/Kconfig
+++ b/arch/arm/mach-cns3xxx/Kconfig
@@ -2,7 +2,6 @@
 	bool "Cavium Networks CNS3XXX family"
 	depends on ARCH_MULTI_V6
 	select ARM_GIC
-	select PCI_DOMAINS if PCI
 	help
 	  Support for Cavium Networks CNS3XXX platform.
 
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index 0d046ac..ed3d0e9 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -501,6 +501,7 @@
 	CLK("da8xx_lcdc.0",	"fck",		&lcdc_clk),
 	CLK("da830-mmc.0",	NULL,		&mmcsd0_clk),
 	CLK("da830-mmc.1",	NULL,		&mmcsd1_clk),
+	CLK("ti-aemif",		NULL,		&aemif_clk),
 	CLK(NULL,		"aemif",	&aemif_clk),
 	CLK(NULL,		"usb11",	&usb11_clk),
 	CLK(NULL,		"usb20",	&usb20_clk),
diff --git a/arch/arm/mach-davinci/da8xx-dt.c b/arch/arm/mach-davinci/da8xx-dt.c
index 754f478..c9f7e92 100644
--- a/arch/arm/mach-davinci/da8xx-dt.c
+++ b/arch/arm/mach-davinci/da8xx-dt.c
@@ -37,6 +37,7 @@
 	OF_DEV_AUXDATA("ti,davinci-dm6467-emac", 0x01e20000, "davinci_emac.1",
 		       NULL),
 	OF_DEV_AUXDATA("ti,da830-mcasp-audio", 0x01d00000, "davinci-mcasp.0", NULL),
+	OF_DEV_AUXDATA("ti,da850-aemif", 0x68000000, "ti-aemif", NULL),
 	{}
 };
 
@@ -49,6 +50,7 @@
 
 static const char *const da850_boards_compat[] __initconst = {
 	"enbw,cmc",
+	"ti,da850-lcdk",
 	"ti,da850-evm",
 	"ti,da850",
 	NULL,
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 8f820de..0bb63b8 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -12,6 +12,7 @@
 	depends on ARCH_MULTI_V7
 	select ARCH_HAS_BANDGAP
 	select ARCH_HAS_HOLES_MEMORYMODEL
+	select ARCH_SUPPORTS_BIG_ENDIAN
 	select ARM_AMBA
 	select ARM_GIC
 	select COMMON_CLK_SAMSUNG
@@ -126,8 +127,6 @@
 	select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
 	select HAVE_ARM_ARCH_TIMER
 	select AUTO_ZRELADDR
-	select MIGHT_HAVE_PCI
-	select PCI_DOMAINS if PCI
 	select PINCTRL_EXYNOS5440
 	select PM_OPP
 	help
diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c
index acabf0b..757fc11 100644
--- a/arch/arm/mach-exynos/exynos.c
+++ b/arch/arm/mach-exynos/exynos.c
@@ -30,25 +30,10 @@
 
 static struct map_desc exynos4_iodesc[] __initdata = {
 	{
-		.virtual	= (unsigned long)S5P_VA_CMU,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_CMU),
-		.length		= SZ_128K,
-		.type		= MT_DEVICE,
-	}, {
 		.virtual	= (unsigned long)S5P_VA_COREPERI_BASE,
 		.pfn		= __phys_to_pfn(EXYNOS4_PA_COREPERI),
 		.length		= SZ_8K,
 		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_DMC0,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_DMC0),
-		.length		= SZ_64K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_DMC1,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_DMC1),
-		.length		= SZ_64K,
-		.type		= MT_DEVICE,
 	},
 };
 
diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h
index c48ba4f..5fb0040 100644
--- a/arch/arm/mach-exynos/include/mach/map.h
+++ b/arch/arm/mach-exynos/include/mach/map.h
@@ -18,11 +18,6 @@
 
 #define EXYNOS_PA_CHIPID		0x10000000
 
-#define EXYNOS4_PA_CMU			0x10030000
-
-#define EXYNOS4_PA_DMC0			0x10400000
-#define EXYNOS4_PA_DMC1			0x10410000
-
 #define EXYNOS4_PA_COREPERI		0x10500000
 
 #endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index ee9a318..9155b63 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -64,13 +64,6 @@
 config ARCH_MXC_IOMUX_V3
 	bool
 
-config SOC_IMX1
-	bool
-	select CPU_ARM920T
-	select IMX_HAVE_IOMUX_V1
-	select MXC_AVIC
-	select PINCTRL_IMX1
-
 config SOC_IMX21
 	bool
 	select CPU_ARM926T
@@ -88,7 +81,6 @@
 	bool
 	select CPU_V6
 	select MXC_AVIC
-	select SMP_ON_UP if SMP
 
 config SOC_IMX35
 	bool
@@ -96,35 +88,6 @@
 	select HAVE_EPIT
 	select MXC_AVIC
 	select PINCTRL_IMX35
-	select SMP_ON_UP if SMP
-
-if ARCH_MULTI_V4T
-
-comment "MX1 platforms:"
-
-config MACH_SCB9328
-	bool "Synertronixx scb9328"
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select SOC_IMX1
-	help
-	  Say Y here if you are using a Synertronixx scb9328 board
-
-config MACH_APF9328
-	bool "APF9328"
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select SOC_IMX1
-	help
-	  Say Yes here if you are using the Armadeus APF9328 development board
-
-config MACH_IMX1_DT
-	bool "Support i.MX1 platforms from device tree"
-	select SOC_IMX1
-	help
-	  Include support for Freescale i.MX1 based platforms
-	  using the device tree for discovery.
-
-endif
 
 if ARCH_MULTI_V5
 
@@ -461,6 +424,18 @@
 
 comment "Device tree only"
 
+if ARCH_MULTI_V4T
+
+config SOC_IMX1
+	bool "i.MX1 support"
+	select CPU_ARM920T
+	select MXC_AVIC
+	select PINCTRL_IMX1
+	help
+	  This enables support for Freescale i.MX1 processor
+
+endif
+
 if ARCH_MULTI_V5
 
 config SOC_IMX25
@@ -523,7 +498,6 @@
 	select ARM_ERRATA_764369 if SMP
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD
-	select PCI_DOMAINS if PCI
 	select PINCTRL_IMX6Q
 	select SOC_IMX6
 
@@ -569,7 +543,6 @@
 	bool "Freescale LS1021A support"
 	select ARM_GIC
 	select HAVE_ARM_ARCH_TIMER
-	select PCI_DOMAINS if PCI
 	select ZONE_DMA if ARM_LPAE
 	help
 	  This enables support for Freescale LS1021A processor.
@@ -585,7 +558,6 @@
 	select ARM_GIC if ARCH_MULTI_V7
 	select PINCTRL_VF610
 	select PL310_ERRATA_769419 if CACHE_L2X0
-	select SMP_ON_UP if SMP
 
 	help
 	  This enables support for Freescale Vybrid VF610 processor.
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 9f5fffd..cab1289 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -1,6 +1,5 @@
 obj-y := cpu.o system.o irq-common.o
 
-obj-$(CONFIG_SOC_IMX1) += mm-imx1.o
 obj-$(CONFIG_SOC_IMX21) += mm-imx21.o
 
 obj-$(CONFIG_SOC_IMX25) += cpu-imx25.o mach-imx25.o pm-imx25.o
@@ -28,6 +27,7 @@
 obj-$(CONFIG_SOC_IMX6Q) += cpuidle-imx6q.o
 obj-$(CONFIG_SOC_IMX6SL) += cpuidle-imx6sl.o
 obj-$(CONFIG_SOC_IMX6SX) += cpuidle-imx6sx.o
+obj-$(CONFIG_SOC_IMX6UL) += cpuidle-imx6sx.o
 endif
 
 ifdef CONFIG_SND_IMX_SOC
@@ -35,11 +35,6 @@
 obj-y += ssi-fiq-ksym.o
 endif
 
-# i.MX1 based machines
-obj-$(CONFIG_MACH_SCB9328) += mach-scb9328.o
-obj-$(CONFIG_MACH_APF9328) += mach-apf9328.o
-obj-$(CONFIG_MACH_IMX1_DT) += imx1-dt.o
-
 # i.MX21 based machines
 obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o
 
@@ -93,6 +88,7 @@
 endif
 obj-$(CONFIG_SOC_IMX6) += pm-imx6.o
 
+obj-$(CONFIG_SOC_IMX1) += mach-imx1.o
 obj-$(CONFIG_SOC_IMX50) += mach-imx50.o
 obj-$(CONFIG_SOC_IMX51) += mach-imx51.o
 obj-$(CONFIG_SOC_IMX53) += mach-imx53.o
diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h
index a8f4693..c4436d9 100644
--- a/arch/arm/mach-imx/common.h
+++ b/arch/arm/mach-imx/common.h
@@ -21,29 +21,24 @@
 enum mxc_cpu_pwr_mode;
 struct of_device_id;
 
-void mx1_map_io(void);
 void mx21_map_io(void);
 void mx27_map_io(void);
 void mx31_map_io(void);
 void mx35_map_io(void);
-void imx1_init_early(void);
 void imx21_init_early(void);
 void imx27_init_early(void);
 void imx31_init_early(void);
 void imx35_init_early(void);
 void mxc_init_irq(void __iomem *);
-void mx1_init_irq(void);
 void mx21_init_irq(void);
 void mx27_init_irq(void);
 void mx31_init_irq(void);
 void mx35_init_irq(void);
-void imx1_soc_init(void);
 void imx21_soc_init(void);
 void imx27_soc_init(void);
 void imx31_soc_init(void);
 void imx35_soc_init(void);
 void epit_timer_init(void __iomem *base, int irq);
-int mx1_clocks_init(unsigned long fref);
 int mx21_clocks_init(unsigned long lref, unsigned long fref);
 int mx27_clocks_init(unsigned long fref);
 int mx31_clocks_init(unsigned long fref);
@@ -109,7 +104,7 @@
 void imx_anatop_pre_suspend(void);
 void imx_anatop_post_resume(void);
 int imx6_set_lpm(enum mxc_cpu_pwr_mode mode);
-void imx6q_set_int_mem_clk_lpm(bool enable);
+void imx6_set_int_mem_clk_lpm(bool enable);
 void imx6sl_set_wait_clk(bool enter);
 int imx_mmdc_get_ddr_type(void);
 
diff --git a/arch/arm/mach-imx/cpuidle-imx6q.c b/arch/arm/mach-imx/cpuidle-imx6q.c
index db0f48c..bfeb25a 100644
--- a/arch/arm/mach-imx/cpuidle-imx6q.c
+++ b/arch/arm/mach-imx/cpuidle-imx6q.c
@@ -85,7 +85,7 @@
 int __init imx6q_cpuidle_init(void)
 {
 	/* Set INT_MEM_CLK_LPM bit to get a reliable WAIT mode support */
-	imx6q_set_int_mem_clk_lpm(true);
+	imx6_set_int_mem_clk_lpm(true);
 
 	return cpuidle_register(&imx6q_cpuidle_driver, NULL);
 }
diff --git a/arch/arm/mach-imx/cpuidle-imx6sx.c b/arch/arm/mach-imx/cpuidle-imx6sx.c
index 3c6672b..c5a5c3a 100644
--- a/arch/arm/mach-imx/cpuidle-imx6sx.c
+++ b/arch/arm/mach-imx/cpuidle-imx6sx.c
@@ -9,6 +9,7 @@
 #include <linux/cpuidle.h>
 #include <linux/cpu_pm.h>
 #include <linux/module.h>
+#include <asm/cacheflush.h>
 #include <asm/cpuidle.h>
 #include <asm/suspend.h>
 
@@ -17,6 +18,15 @@
 
 static int imx6sx_idle_finish(unsigned long val)
 {
+	/*
+	 * for Cortex-A7 which has an internal L2
+	 * cache, need to flush it before powering
+	 * down ARM platform, since flushing L1 cache
+	 * here again has very small overhead, compared
+	 * to adding conditional code for L2 cache type,
+	 * just call flush_cache_all() is fine.
+	 */
+	flush_cache_all();
 	cpu_do_idle();
 
 	return 0;
@@ -90,6 +100,7 @@
 
 int __init imx6sx_cpuidle_init(void)
 {
+	imx6_set_int_mem_clk_lpm(true);
 	imx6_enable_rbc(false);
 	/*
 	 * set ARM power up/down timing to the fastest,
diff --git a/arch/arm/mach-imx/devices-imx1.h b/arch/arm/mach-imx/devices-imx1.h
deleted file mode 100644
index f9b5afc..0000000
--- a/arch/arm/mach-imx/devices-imx1.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include "devices/devices-common.h"
-
-extern const struct imx_imx_fb_data imx1_imx_fb_data;
-#define imx1_add_imx_fb(pdata) \
-    imx_add_imx_fb(&imx1_imx_fb_data, pdata)
-
-extern const struct imx_imx_i2c_data imx1_imx_i2c_data;
-#define imx1_add_imx_i2c(pdata)		\
-	imx_add_imx_i2c(&imx1_imx_i2c_data, pdata)
-
-extern const struct imx_imx_uart_3irq_data imx1_imx_uart_data[];
-#define imx1_add_imx_uart(id, pdata)	\
-	imx_add_imx_uart_3irq(&imx1_imx_uart_data[id], pdata)
-#define imx1_add_imx_uart0(pdata)	imx1_add_imx_uart(0, pdata)
-#define imx1_add_imx_uart1(pdata)	imx1_add_imx_uart(1, pdata)
-
-extern const struct imx_spi_imx_data imx1_cspi_data[];
-#define imx1_add_cspi(id, pdata)   \
-	imx_add_spi_imx(&imx1_cspi_data[id], pdata)
-
-#define imx1_add_spi_imx0(pdata) imx1_add_cspi(0, pdata)
-#define imx1_add_spi_imx1(pdata) imx1_add_cspi(1, pdata)
diff --git a/arch/arm/mach-imx/devices/Makefile b/arch/arm/mach-imx/devices/Makefile
index e5cf587..aa6cee8 100644
--- a/arch/arm/mach-imx/devices/Makefile
+++ b/arch/arm/mach-imx/devices/Makefile
@@ -20,7 +20,6 @@
 obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_EHCI) += platform-mxc-ehci.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_MMC) += platform-mxc-mmc.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_NAND) += platform-mxc_nand.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_RNGA) += platform-mxc_rnga.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_RTC) += platform-mxc_rtc.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_W1) += platform-mxc_w1.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX) += platform-sdhci-esdhc-imx.o
diff --git a/arch/arm/mach-imx/devices/devices-common.h b/arch/arm/mach-imx/devices/devices-common.h
index 09cebd8..6920e35 100644
--- a/arch/arm/mach-imx/devices/devices-common.h
+++ b/arch/arm/mach-imx/devices/devices-common.h
@@ -154,18 +154,6 @@
 		const struct imx_ssi_platform_data *pdata);
 
 #include <linux/platform_data/serial-imx.h>
-struct imx_imx_uart_3irq_data {
-	int id;
-	resource_size_t iobase;
-	resource_size_t iosize;
-	resource_size_t irqrx;
-	resource_size_t irqtx;
-	resource_size_t irqrts;
-};
-struct platform_device *__init imx_add_imx_uart_3irq(
-		const struct imx_imx_uart_3irq_data *data,
-		const struct imxuart_platform_data *pdata);
-
 struct imx_imx_uart_1irq_data {
 	int id;
 	resource_size_t iobase;
diff --git a/arch/arm/mach-imx/devices/platform-imx-fb.c b/arch/arm/mach-imx/devices/platform-imx-fb.c
index 7df6328..aa00272 100644
--- a/arch/arm/mach-imx/devices/platform-imx-fb.c
+++ b/arch/arm/mach-imx/devices/platform-imx-fb.c
@@ -19,11 +19,6 @@
 		.irq = soc ## _INT_LCDC,				\
 	}
 
-#ifdef CONFIG_SOC_IMX1
-const struct imx_imx_fb_data imx1_imx_fb_data __initconst =
-	imx_imx_fb_data_entry_single(MX1, "imx1-fb", SZ_4K);
-#endif /* ifdef CONFIG_SOC_IMX1 */
-
 #ifdef CONFIG_SOC_IMX21
 const struct imx_imx_fb_data imx21_imx_fb_data __initconst =
 	imx_imx_fb_data_entry_single(MX21, "imx21-fb", SZ_4K);
diff --git a/arch/arm/mach-imx/devices/platform-imx-i2c.c b/arch/arm/mach-imx/devices/platform-imx-i2c.c
index ae97915..9822bed 100644
--- a/arch/arm/mach-imx/devices/platform-imx-i2c.c
+++ b/arch/arm/mach-imx/devices/platform-imx-i2c.c
@@ -21,11 +21,6 @@
 #define imx_imx_i2c_data_entry(soc, _devid, _id, _hwid, _size)		\
 	[_id] = imx_imx_i2c_data_entry_single(soc, _devid, _id, _hwid, _size)
 
-#ifdef CONFIG_SOC_IMX1
-const struct imx_imx_i2c_data imx1_imx_i2c_data __initconst =
-	imx_imx_i2c_data_entry_single(MX1, "imx1-i2c", 0, , SZ_4K);
-#endif /* ifdef CONFIG_SOC_IMX1 */
-
 #ifdef CONFIG_SOC_IMX21
 const struct imx_imx_i2c_data imx21_imx_i2c_data __initconst =
 	imx_imx_i2c_data_entry_single(MX21, "imx21-i2c", 0, , SZ_4K);
diff --git a/arch/arm/mach-imx/devices/platform-imx-uart.c b/arch/arm/mach-imx/devices/platform-imx-uart.c
index 6962cff..e3c89e9 100644
--- a/arch/arm/mach-imx/devices/platform-imx-uart.c
+++ b/arch/arm/mach-imx/devices/platform-imx-uart.c
@@ -27,15 +27,6 @@
 		.irq = soc ## _INT_UART ## _hwid,			\
 	}
 
-#ifdef CONFIG_SOC_IMX1
-const struct imx_imx_uart_3irq_data imx1_imx_uart_data[] __initconst = {
-#define imx1_imx_uart_data_entry(_id, _hwid)				\
-	imx_imx_uart_3irq_data_entry(MX1, _id, _hwid, 0xd0)
-	imx1_imx_uart_data_entry(0, 1),
-	imx1_imx_uart_data_entry(1, 2),
-};
-#endif /* ifdef CONFIG_SOC_IMX1 */
-
 #ifdef CONFIG_SOC_IMX21
 const struct imx_imx_uart_1irq_data imx21_imx_uart_data[] __initconst = {
 #define imx21_imx_uart_data_entry(_id, _hwid)				\
@@ -82,34 +73,6 @@
 };
 #endif /* ifdef CONFIG_SOC_IMX35 */
 
-struct platform_device *__init imx_add_imx_uart_3irq(
-		const struct imx_imx_uart_3irq_data *data,
-		const struct imxuart_platform_data *pdata)
-{
-	struct resource res[] = {
-		{
-			.start = data->iobase,
-			.end = data->iobase + data->iosize - 1,
-			.flags = IORESOURCE_MEM,
-		}, {
-			.start = data->irqrx,
-			.end = data->irqrx,
-			.flags = IORESOURCE_IRQ,
-		}, {
-			.start = data->irqtx,
-			.end = data->irqtx,
-			.flags = IORESOURCE_IRQ,
-		}, {
-			.start = data->irqrts,
-			.end = data->irqrx,
-			.flags = IORESOURCE_IRQ,
-		},
-	};
-
-	return imx_add_platform_device("imx1-uart", data->id, res,
-			ARRAY_SIZE(res), pdata, sizeof(*pdata));
-}
-
 struct platform_device *__init imx_add_imx_uart_1irq(
 		const struct imx_imx_uart_1irq_data *data,
 		const struct imxuart_platform_data *pdata)
diff --git a/arch/arm/mach-imx/devices/platform-spi_imx.c b/arch/arm/mach-imx/devices/platform-spi_imx.c
index 5e9707b..d93c446 100644
--- a/arch/arm/mach-imx/devices/platform-spi_imx.c
+++ b/arch/arm/mach-imx/devices/platform-spi_imx.c
@@ -21,15 +21,6 @@
 #define imx_spi_imx_data_entry(soc, type, devid, id, hwid, size)	\
 	[id] = imx_spi_imx_data_entry_single(soc, type, devid, id, hwid, size)
 
-#ifdef CONFIG_SOC_IMX1
-const struct imx_spi_imx_data imx1_cspi_data[] __initconst = {
-#define imx1_cspi_data_entry(_id, _hwid) \
-	imx_spi_imx_data_entry(MX1, CSPI, "imx1-cspi", _id, _hwid, SZ_4K)
-	imx1_cspi_data_entry(0, 1),
-	imx1_cspi_data_entry(1, 2),
-};
-#endif
-
 #ifdef CONFIG_SOC_IMX21
 const struct imx_spi_imx_data imx21_cspi_data[] __initconst = {
 #define imx21_cspi_data_entry(_id, _hwid)                            \
diff --git a/arch/arm/mach-imx/hardware.h b/arch/arm/mach-imx/hardware.h
index d737f95..90e10cb 100644
--- a/arch/arm/mach-imx/hardware.h
+++ b/arch/arm/mach-imx/hardware.h
@@ -112,7 +112,6 @@
 #include "mx2x.h"
 #include "mx21.h"
 #include "mx27.h"
-#include "mx1.h"
 
 #define imx_map_entry(soc, name, _type)	{				\
 	.virtual = soc ## _IO_P2V(soc ## _ ## name ## _BASE_ADDR),	\
@@ -121,7 +120,7 @@
 	.type = _type,							\
 }
 
-/* There's a off-by-one betweem the gpio bank number and the gpiochip */
+/* There's an off-by-one between the gpio bank number and the gpiochip */
 /* range e.g. GPIO_1_5 is gpio 5 under linux */
 #define IMX_GPIO_NR(bank, nr)		(((bank) - 1) * 32 + (nr))
 
diff --git a/arch/arm/mach-imx/iomux-mx1.h b/arch/arm/mach-imx/iomux-mx1.h
deleted file mode 100644
index 95f4681..0000000
--- a/arch/arm/mach-imx/iomux-mx1.h
+++ /dev/null
@@ -1,155 +0,0 @@
-/*
- * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-#ifndef __MACH_IOMUX_MX1_H__
-#define __MACH_IOMUX_MX1_H__
-
-#include "iomux-v1.h"
-
-#define PA0_AIN_SPI2_CLK	(GPIO_PORTA | GPIO_AIN | GPIO_OUT | 0)
-#define PA0_AF_ETMTRACESYNC	(GPIO_PORTA | GPIO_AF | 0)
-#define PA1_AOUT_SPI2_RXD	(GPIO_PORTA | GPIO_AOUT | GPIO_IN | 1)
-#define PA1_PF_TIN		(GPIO_PORTA | GPIO_PF | 1)
-#define PA2_PF_PWM0		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 2)
-#define PA3_PF_CSI_MCLK		(GPIO_PORTA | GPIO_PF | 3)
-#define PA4_PF_CSI_D0		(GPIO_PORTA | GPIO_PF | 4)
-#define PA5_PF_CSI_D1		(GPIO_PORTA | GPIO_PF | 5)
-#define PA6_PF_CSI_D2		(GPIO_PORTA | GPIO_PF | 6)
-#define PA7_PF_CSI_D3		(GPIO_PORTA | GPIO_PF | 7)
-#define PA8_PF_CSI_D4		(GPIO_PORTA | GPIO_PF | 8)
-#define PA9_PF_CSI_D5		(GPIO_PORTA | GPIO_PF | 9)
-#define PA10_PF_CSI_D6		(GPIO_PORTA | GPIO_PF | 10)
-#define PA11_PF_CSI_D7		(GPIO_PORTA | GPIO_PF | 11)
-#define PA12_PF_CSI_VSYNC	(GPIO_PORTA | GPIO_PF | 12)
-#define PA13_PF_CSI_HSYNC	(GPIO_PORTA | GPIO_PF | 13)
-#define PA14_PF_CSI_PIXCLK	(GPIO_PORTA | GPIO_PF | 14)
-#define PA15_PF_I2C_SDA		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 15)
-#define PA16_PF_I2C_SCL		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 16)
-#define PA17_AF_ETMTRACEPKT4	(GPIO_PORTA | GPIO_AF | 17)
-#define PA17_AIN_SPI2_SS	(GPIO_PORTA | GPIO_AIN | GPIO_OUT | 17)
-#define PA18_AF_ETMTRACEPKT5	(GPIO_PORTA | GPIO_AF | 18)
-#define PA19_AF_ETMTRACEPKT6	(GPIO_PORTA | GPIO_AF | 19)
-#define PA20_AF_ETMTRACEPKT7	(GPIO_PORTA | GPIO_AF | 20)
-#define PA21_PF_A0		(GPIO_PORTA | GPIO_PF | 21)
-#define PA22_PF_CS4		(GPIO_PORTA | GPIO_PF | 22)
-#define PA23_PF_CS5		(GPIO_PORTA | GPIO_PF | 23)
-#define PA24_PF_A16		(GPIO_PORTA | GPIO_PF | 24)
-#define PA24_AF_ETMTRACEPKT0	(GPIO_PORTA | GPIO_AF | 24)
-#define PA25_PF_A17		(GPIO_PORTA | GPIO_PF | 25)
-#define PA25_AF_ETMTRACEPKT1	(GPIO_PORTA | GPIO_AF | 25)
-#define PA26_PF_A18		(GPIO_PORTA | GPIO_PF | 26)
-#define PA26_AF_ETMTRACEPKT2	(GPIO_PORTA | GPIO_AF | 26)
-#define PA27_PF_A19		(GPIO_PORTA | GPIO_PF | 27)
-#define PA27_AF_ETMTRACEPKT3	(GPIO_PORTA | GPIO_AF | 27)
-#define PA28_PF_A20		(GPIO_PORTA | GPIO_PF | 28)
-#define PA28_AF_ETMPIPESTAT0	(GPIO_PORTA | GPIO_AF | 28)
-#define PA29_PF_A21		(GPIO_PORTA | GPIO_PF | 29)
-#define PA29_AF_ETMPIPESTAT1	(GPIO_PORTA | GPIO_AF | 29)
-#define PA30_PF_A22		(GPIO_PORTA | GPIO_PF | 30)
-#define PA30_AF_ETMPIPESTAT2	(GPIO_PORTA | GPIO_AF | 30)
-#define PA31_PF_A23		(GPIO_PORTA | GPIO_PF | 31)
-#define PA31_AF_ETMTRACECLK	(GPIO_PORTA | GPIO_AF | 31)
-#define PB8_PF_SD_DAT0		(GPIO_PORTB | GPIO_PF | GPIO_PUEN | 8)
-#define PB8_AF_MS_PIO		(GPIO_PORTB | GPIO_AF | 8)
-#define PB9_PF_SD_DAT1		(GPIO_PORTB | GPIO_PF | GPIO_PUEN | 9)
-#define PB9_AF_MS_PI1		(GPIO_PORTB | GPIO_AF | 9)
-#define PB10_PF_SD_DAT2		(GPIO_PORTB | GPIO_PF | GPIO_PUEN | 10)
-#define PB10_AF_MS_SCLKI	(GPIO_PORTB | GPIO_AF | 10)
-#define PB11_PF_SD_DAT3		(GPIO_PORTB | GPIO_PF | 11)
-#define PB11_AF_MS_SDIO		(GPIO_PORTB | GPIO_AF | 11)
-#define PB12_PF_SD_CLK		(GPIO_PORTB | GPIO_PF | 12)
-#define PB12_AF_MS_SCLK0	(GPIO_PORTB | GPIO_AF | 12)
-#define PB13_PF_SD_CMD		(GPIO_PORTB | GPIO_PF | GPIO_PUEN | 13)
-#define PB13_AF_MS_BS		(GPIO_PORTB | GPIO_AF | 13)
-#define PB14_AF_SSI_RXFS	(GPIO_PORTB | GPIO_AF | 14)
-#define PB15_AF_SSI_RXCLK	(GPIO_PORTB | GPIO_AF | 15)
-#define PB16_AF_SSI_RXDAT	(GPIO_PORTB | GPIO_AF | GPIO_IN | 16)
-#define PB17_AF_SSI_TXDAT	(GPIO_PORTB | GPIO_AF | GPIO_OUT | 17)
-#define PB18_AF_SSI_TXFS	(GPIO_PORTB | GPIO_AF | 18)
-#define PB19_AF_SSI_TXCLK	(GPIO_PORTB | GPIO_AF | 19)
-#define PB20_PF_USBD_AFE	(GPIO_PORTB | GPIO_PF | 20)
-#define PB21_PF_USBD_OE		(GPIO_PORTB | GPIO_PF | 21)
-#define PB22_PF_USBD_RCV	(GPIO_PORTB | GPIO_PF | 22)
-#define PB23_PF_USBD_SUSPND	(GPIO_PORTB | GPIO_PF | 23)
-#define PB24_PF_USBD_VP		(GPIO_PORTB | GPIO_PF | 24)
-#define PB25_PF_USBD_VM		(GPIO_PORTB | GPIO_PF | 25)
-#define PB26_PF_USBD_VPO	(GPIO_PORTB | GPIO_PF | 26)
-#define PB27_PF_USBD_VMO	(GPIO_PORTB | GPIO_PF | 27)
-#define PB28_PF_UART2_CTS	(GPIO_PORTB | GPIO_PF | GPIO_OUT | 28)
-#define PB29_PF_UART2_RTS	(GPIO_PORTB | GPIO_PF | GPIO_IN | 29)
-#define PB30_PF_UART2_TXD	(GPIO_PORTB | GPIO_PF | GPIO_OUT | 30)
-#define PB31_PF_UART2_RXD	(GPIO_PORTB | GPIO_PF | GPIO_IN | 31)
-#define PC3_PF_SSI_RXFS		(GPIO_PORTC | GPIO_PF | 3)
-#define PC4_PF_SSI_RXCLK	(GPIO_PORTC | GPIO_PF | 4)
-#define PC5_PF_SSI_RXDAT	(GPIO_PORTC | GPIO_PF | GPIO_IN | 5)
-#define PC6_PF_SSI_TXDAT	(GPIO_PORTC | GPIO_PF | GPIO_OUT | 6)
-#define PC7_PF_SSI_TXFS		(GPIO_PORTC | GPIO_PF | 7)
-#define PC8_PF_SSI_TXCLK	(GPIO_PORTC | GPIO_PF | 8)
-#define PC9_PF_UART1_CTS	(GPIO_PORTC | GPIO_PF | GPIO_OUT | 9)
-#define PC10_PF_UART1_RTS	(GPIO_PORTC | GPIO_PF | GPIO_IN | 10)
-#define PC11_PF_UART1_TXD	(GPIO_PORTC | GPIO_PF | GPIO_OUT | 11)
-#define PC12_PF_UART1_RXD	(GPIO_PORTC | GPIO_PF | GPIO_IN | 12)
-#define PC13_PF_SPI1_SPI_RDY	(GPIO_PORTC | GPIO_PF | 13)
-#define PC14_PF_SPI1_SCLK	(GPIO_PORTC | GPIO_PF | 14)
-#define PC15_PF_SPI1_SS		(GPIO_PORTC | GPIO_PF | 15)
-#define PC16_PF_SPI1_MISO	(GPIO_PORTC | GPIO_PF | 16)
-#define PC17_PF_SPI1_MOSI	(GPIO_PORTC | GPIO_PF | 17)
-#define PC24_BIN_UART3_RI	(GPIO_PORTC | GPIO_BIN | GPIO_OUT | 24)
-#define PC25_BIN_UART3_DSR	(GPIO_PORTC | GPIO_BIN | GPIO_OUT | 25)
-#define PC26_AOUT_UART3_DTR	(GPIO_PORTC | GPIO_AOUT | GPIO_IN | 26)
-#define PC27_BIN_UART3_DCD	(GPIO_PORTC | GPIO_BIN | GPIO_OUT | 27)
-#define PC28_BIN_UART3_CTS	(GPIO_PORTC | GPIO_BIN | GPIO_OUT | 28)
-#define PC29_AOUT_UART3_RTS	(GPIO_PORTC | GPIO_AOUT | GPIO_IN | 29)
-#define PC30_BIN_UART3_TX	(GPIO_PORTC | GPIO_BIN | 30)
-#define PC31_AOUT_UART3_RX	(GPIO_PORTC | GPIO_AOUT | GPIO_IN | 31)
-#define PD6_PF_LSCLK		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 6)
-#define PD7_PF_REV		(GPIO_PORTD | GPIO_PF | 7)
-#define PD7_AF_UART2_DTR	(GPIO_PORTD | GPIO_AF | GPIO_IN | 7)
-#define PD7_AIN_SPI2_SCLK	(GPIO_PORTD | GPIO_AIN | 7)
-#define PD8_PF_CLS		(GPIO_PORTD | GPIO_PF | 8)
-#define PD8_AF_UART2_DCD	(GPIO_PORTD | GPIO_AF | GPIO_OUT | 8)
-#define PD8_AIN_SPI2_SS		(GPIO_PORTD | GPIO_AIN | 8)
-#define PD9_PF_PS		(GPIO_PORTD | GPIO_PF | 9)
-#define PD9_AF_UART2_RI		(GPIO_PORTD | GPIO_AF | GPIO_OUT | 9)
-#define PD9_AOUT_SPI2_RXD	(GPIO_PORTD | GPIO_AOUT | GPIO_IN | 9)
-#define PD10_PF_SPL_SPR		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 10)
-#define PD10_AF_UART2_DSR	(GPIO_PORTD | GPIO_AF | GPIO_OUT | 10)
-#define PD10_AIN_SPI2_TXD	(GPIO_PORTD | GPIO_AIN | GPIO_OUT | 10)
-#define PD11_PF_CONTRAST	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 11)
-#define PD12_PF_ACD_OE		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 12)
-#define PD13_PF_LP_HSYNC	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 13)
-#define PD14_PF_FLM_VSYNC	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 14)
-#define PD15_PF_LD0		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 15)
-#define PD16_PF_LD1		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 16)
-#define PD17_PF_LD2		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 17)
-#define PD18_PF_LD3		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 18)
-#define PD19_PF_LD4		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 19)
-#define PD20_PF_LD5		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 20)
-#define PD21_PF_LD6		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 21)
-#define PD22_PF_LD7		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 22)
-#define PD23_PF_LD8		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 23)
-#define PD24_PF_LD9		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 24)
-#define PD25_PF_LD10		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 25)
-#define PD26_PF_LD11		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 26)
-#define PD27_PF_LD12		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 27)
-#define PD28_PF_LD13		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 28)
-#define PD29_PF_LD14		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 29)
-#define PD30_PF_LD15		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 30)
-#define PD31_PF_TMR2OUT		(GPIO_PORTD | GPIO_PF | 31)
-#define PD31_BIN_SPI2_TXD	(GPIO_PORTD | GPIO_BIN | 31)
-
-#endif /* ifndef __MACH_IOMUX_MX1_H__ */
diff --git a/arch/arm/mach-imx/iomux-mx3.h b/arch/arm/mach-imx/iomux-mx3.h
index 2e4a0dd..368667b 100644
--- a/arch/arm/mach-imx/iomux-mx3.h
+++ b/arch/arm/mach-imx/iomux-mx3.h
@@ -598,10 +598,7 @@
 #define MX31_PIN_CONTRAST__CONTRAST	IOMUX_MODE(MX31_PIN_CONTRAST, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_D3_SPL__D3_SPL		IOMUX_MODE(MX31_PIN_D3_SPL, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_D3_CLS__D3_CLS		IOMUX_MODE(MX31_PIN_D3_CLS, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_LCS0__GPI03_23		IOMUX_MODE(MX31_PIN_LCS0, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_GPIO1_1__GPIO          IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_I2C_CLK__SCL		IOMUX_MODE(MX31_PIN_I2C_CLK, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_I2C_DAT__SDA		IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_DCD_DTE1__I2C2_SDA	IOMUX_MODE(MX31_PIN_DCD_DTE1, IOMUX_CONFIG_ALT2)
 #define MX31_PIN_RI_DTE1__I2C2_SCL	IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_ALT2)
 #define MX31_PIN_CSPI2_SS2__I2C3_SDA	IOMUX_MODE(MX31_PIN_CSPI2_SS2, IOMUX_CONFIG_ALT1)
@@ -665,37 +662,6 @@
 #define MX31_PIN_USB_OC__GPIO1_30	IOMUX_MODE(MX31_PIN_USB_OC, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_I2C_DAT__I2C1_SDA	IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_I2C_CLK__I2C1_SCL	IOMUX_MODE(MX31_PIN_I2C_CLK, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_DCD_DTE1__I2C2_SDA	IOMUX_MODE(MX31_PIN_DCD_DTE1, IOMUX_CONFIG_ALT2)
-#define MX31_PIN_RI_DTE1__I2C2_SCL	IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_ALT2)
-#define MX31_PIN_ATA_CS0__GPIO3_26	IOMUX_MODE(MX31_PIN_ATA_CS0, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_ATA_CS1__GPIO3_27	IOMUX_MODE(MX31_PIN_ATA_CS1, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_PC_PWRON__SD2_DATA3	IOMUX_MODE(MX31_PIN_PC_PWRON, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_PC_VS1__SD2_DATA2	IOMUX_MODE(MX31_PIN_PC_VS1, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_PC_READY__SD2_DATA1	IOMUX_MODE(MX31_PIN_PC_READY, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_PC_WAIT_B__SD2_DATA0	IOMUX_MODE(MX31_PIN_PC_WAIT_B, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_PC_CD2_B__SD2_CLK	IOMUX_MODE(MX31_PIN_PC_CD2_B, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_PC_CD1_B__SD2_CMD	IOMUX_MODE(MX31_PIN_PC_CD1_B, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_ATA_DIOR__GPIO3_28	IOMUX_MODE(MX31_PIN_ATA_DIOR, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_ATA_DIOW__GPIO3_29	IOMUX_MODE(MX31_PIN_ATA_DIOW, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_CSI_D4__CSI_D4		IOMUX_MODE(MX31_PIN_CSI_D4, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D5__CSI_D5		IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D6__CSI_D6		IOMUX_MODE(MX31_PIN_CSI_D6, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D7__CSI_D7		IOMUX_MODE(MX31_PIN_CSI_D7, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D8__CSI_D8		IOMUX_MODE(MX31_PIN_CSI_D8, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D9__CSI_D9		IOMUX_MODE(MX31_PIN_CSI_D9, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D10__CSI_D10	IOMUX_MODE(MX31_PIN_CSI_D10, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D11__CSI_D11	IOMUX_MODE(MX31_PIN_CSI_D11, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D12__CSI_D12	IOMUX_MODE(MX31_PIN_CSI_D12, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D13__CSI_D13	IOMUX_MODE(MX31_PIN_CSI_D13, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D14__CSI_D14	IOMUX_MODE(MX31_PIN_CSI_D14, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D15__CSI_D15	IOMUX_MODE(MX31_PIN_CSI_D15, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_HSYNC__CSI_HSYNC	IOMUX_MODE(MX31_PIN_CSI_HSYNC, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_MCLK__CSI_MCLK	IOMUX_MODE(MX31_PIN_CSI_MCLK, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_PIXCLK__CSI_PIXCLK	IOMUX_MODE(MX31_PIN_CSI_PIXCLK, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_VSYNC__CSI_VSYNC	IOMUX_MODE(MX31_PIN_CSI_VSYNC, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_GPIO3_0__GPIO3_0	IOMUX_MODE(MX31_PIN_GPIO3_0, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_GPIO3_1__GPIO3_1	IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_TXD2__GPIO1_28		IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_GPIO1_0__GPIO1_0	IOMUX_MODE(MX31_PIN_GPIO1_0, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_SVEN0__GPIO2_0		IOMUX_MODE(MX31_PIN_SVEN0, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_STX0__GPIO2_1		IOMUX_MODE(MX31_PIN_STX0, IOMUX_CONFIG_GPIO)
diff --git a/arch/arm/mach-imx/mach-apf9328.c b/arch/arm/mach-imx/mach-apf9328.c
deleted file mode 100644
index ebbb5ab..0000000
--- a/arch/arm/mach-imx/mach-apf9328.c
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- * linux/arch/arm/mach-imx/mach-apf9328.c
- *
- * Copyright (c) 2005-2011 ARMadeus systems <support@armadeus.com>
- *
- * This work is based on mach-scb9328.c which is:
- * Copyright (c) 2004 Sascha Hauer <saschahauer@web.de>
- * Copyright (c) 2006-2008 Juergen Beisert <jbeisert@netscape.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/dm9000.h>
-#include <linux/gpio.h>
-#include <linux/i2c.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "common.h"
-#include "devices-imx1.h"
-#include "hardware.h"
-#include "iomux-mx1.h"
-
-static const int apf9328_pins[] __initconst = {
-	/* UART1 */
-	PC9_PF_UART1_CTS,
-	PC10_PF_UART1_RTS,
-	PC11_PF_UART1_TXD,
-	PC12_PF_UART1_RXD,
-	/* UART2 */
-	PB28_PF_UART2_CTS,
-	PB29_PF_UART2_RTS,
-	PB30_PF_UART2_TXD,
-	PB31_PF_UART2_RXD,
-	/* I2C */
-	PA15_PF_I2C_SDA,
-	PA16_PF_I2C_SCL,
-};
-
-/*
- * The APF9328 can have up to 32MB NOR Flash
- */
-static struct resource flash_resource = {
-	.start	= MX1_CS0_PHYS,
-	.end	= MX1_CS0_PHYS + SZ_32M - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct physmap_flash_data apf9328_flash_data = {
-	.width  = 2,
-};
-
-static struct platform_device apf9328_flash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev = {
-		.platform_data = &apf9328_flash_data,
-	},
-	.resource = &flash_resource,
-	.num_resources = 1,
-};
-
-/*
- * APF9328 has a DM9000 Ethernet controller
- */
-static struct dm9000_plat_data dm9000_setup = {
-	.flags          = DM9000_PLATF_16BITONLY
-};
-
-static struct resource dm9000_resources[] = {
-	{
-		.start  = MX1_CS4_PHYS + 0x00C00000,
-		.end    = MX1_CS4_PHYS + 0x00C00001,
-		.flags  = IORESOURCE_MEM,
-	}, {
-		.start  = MX1_CS4_PHYS + 0x00C00002,
-		.end    = MX1_CS4_PHYS + 0x00C00003,
-		.flags  = IORESOURCE_MEM,
-	}, {
-		/* irq number is run-time assigned */
-		.flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
-	},
-};
-
-static struct platform_device dm9000x_device = {
-	.name		= "dm9000",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(dm9000_resources),
-	.resource	= dm9000_resources,
-	.dev		= {
-		.platform_data = &dm9000_setup,
-	}
-};
-
-static const struct imxuart_platform_data uart1_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static const struct imxi2c_platform_data apf9328_i2c_data __initconst = {
-	.bitrate = 100000,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&apf9328_flash_device,
-	&dm9000x_device,
-};
-
-static void __init apf9328_init(void)
-{
-	imx1_soc_init();
-
-	mxc_gpio_setup_multiple_pins(apf9328_pins,
-			ARRAY_SIZE(apf9328_pins),
-			"APF9328");
-
-	imx1_add_imx_uart0(NULL);
-	imx1_add_imx_uart1(&uart1_pdata);
-
-	imx1_add_imx_i2c(&apf9328_i2c_data);
-
-	dm9000_resources[2].start = gpio_to_irq(IMX_GPIO_NR(2, 14));
-	dm9000_resources[2].end = gpio_to_irq(IMX_GPIO_NR(2, 14));
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-static void __init apf9328_timer_init(void)
-{
-	mx1_clocks_init(32768);
-}
-
-MACHINE_START(APF9328, "Armadeus APF9328")
-	/* Maintainer: Gwenhael Goavec-Merou, ARMadeus Systems */
-	.map_io       = mx1_map_io,
-	.init_early   = imx1_init_early,
-	.init_irq     = mx1_init_irq,
-	.init_time	= apf9328_timer_init,
-	.init_machine = apf9328_init,
-	.restart	= mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c
index eaee47a..17a97ba 100644
--- a/arch/arm/mach-imx/mach-armadillo5x0.c
+++ b/arch/arm/mach-imx/mach-armadillo5x0.c
@@ -493,24 +493,12 @@
 
 	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
 
-	armadillo5x0_smc911x_resources[1].start =
-			gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_0));
-	armadillo5x0_smc911x_resources[1].end =
-			gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_0));
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-	imx_add_gpio_keys(&armadillo5x0_button_data);
 	imx31_add_imx_i2c1(NULL);
 
 	/* Register UART */
 	imx31_add_imx_uart0(&uart_pdata);
 	imx31_add_imx_uart1(&uart_pdata);
 
-	/* SMSC9118 IRQ pin */
-	gpio_direction_input(MX31_PIN_GPIO1_0);
-
-	/* Register SDHC */
-	imx31_add_mxc_mmc(0, &sdhc_pdata);
-
 	/* Register FB */
 	imx31_add_ipu_core();
 	imx31_add_mx3_sdc_fb(&mx3fb_pdata);
@@ -527,21 +515,39 @@
 	/* set NAND page size to 2k if not configured via boot mode pins */
 	imx_writel(imx_readl(mx3_ccm_base + MXC_CCM_RCSR) | (1 << 30),
 		   mx3_ccm_base + MXC_CCM_RCSR);
+}
+
+static void __init armadillo5x0_late(void)
+{
+	armadillo5x0_smc911x_resources[1].start =
+		gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_0));
+	armadillo5x0_smc911x_resources[1].end =
+		gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_0));
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	imx_add_gpio_keys(&armadillo5x0_button_data);
+
+	/* SMSC9118 IRQ pin */
+	gpio_direction_input(MX31_PIN_GPIO1_0);
+
+	/* Register SDHC */
+	imx31_add_mxc_mmc(0, &sdhc_pdata);
 
 	/* RTC */
 	/* Get RTC IRQ and register the chip */
-	if (gpio_request(ARMADILLO5X0_RTC_GPIO, "rtc") == 0) {
-		if (gpio_direction_input(ARMADILLO5X0_RTC_GPIO) == 0)
-			armadillo5x0_i2c_rtc.irq = gpio_to_irq(ARMADILLO5X0_RTC_GPIO);
+	if (!gpio_request(ARMADILLO5X0_RTC_GPIO, "rtc")) {
+		if (!gpio_direction_input(ARMADILLO5X0_RTC_GPIO))
+			armadillo5x0_i2c_rtc.irq =
+				gpio_to_irq(ARMADILLO5X0_RTC_GPIO);
 		else
 			gpio_free(ARMADILLO5X0_RTC_GPIO);
 	}
+
 	if (armadillo5x0_i2c_rtc.irq == 0)
 		pr_warn("armadillo5x0_init: failed to get RTC IRQ\n");
 	i2c_register_board_info(1, &armadillo5x0_i2c_rtc, 1);
 
 	/* USB */
-
 	usbotg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
 			ULPI_OTG_DRVVBUS_EXT);
 	if (usbotg_pdata.otg)
@@ -565,5 +571,6 @@
 	.init_irq = mx31_init_irq,
 	.init_time	= armadillo5x0_timer_init,
 	.init_machine = armadillo5x0_init,
+	.init_late	= armadillo5x0_late,
 	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/imx1-dt.c b/arch/arm/mach-imx/mach-imx1.c
similarity index 63%
rename from arch/arm/mach-imx/imx1-dt.c
rename to arch/arm/mach-imx/mach-imx1.c
index 6f915b0..de5ab8d 100644
--- a/arch/arm/mach-imx/imx1-dt.c
+++ b/arch/arm/mach-imx/mach-imx1.c
@@ -9,8 +9,27 @@
 
 #include <linux/of_platform.h>
 #include <asm/mach/arch.h>
+#include <asm/mach/map.h>
 
 #include "common.h"
+#include "hardware.h"
+
+#define MX1_AVIC_ADDR	0x00223000
+
+static void __init imx1_init_early(void)
+{
+	mxc_set_cpu_type(MXC_CPU_MX1);
+}
+
+static void __init imx1_init_irq(void)
+{
+	void __iomem *avic_addr;
+
+	avic_addr = ioremap(MX1_AVIC_ADDR, SZ_4K);
+	WARN_ON(!avic_addr);
+
+	mxc_init_irq(avic_addr);
+}
 
 static const char * const imx1_dt_board_compat[] __initconst = {
 	"fsl,imx1",
@@ -18,9 +37,9 @@
 };
 
 DT_MACHINE_START(IMX1_DT, "Freescale i.MX1 (Device Tree Support)")
-	.map_io		= mx1_map_io,
+	.map_io		= debug_ll_io_init,
 	.init_early	= imx1_init_early,
-	.init_irq	= mx1_init_irq,
+	.init_irq	= imx1_init_irq,
 	.dt_compat	= imx1_dt_board_compat,
 	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
index ede2bdb..dd75a47 100644
--- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
+++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
@@ -540,7 +540,6 @@
 static void __init visstrim_m10_board_init(void)
 {
 	int ret;
-	int mo_version;
 
 	imx27_soc_init();
 	visstrim_m10_revision();
@@ -550,11 +549,6 @@
 	if (ret)
 		pr_err("Failed to setup pins (%d)\n", ret);
 
-	ret = gpio_request_array(visstrim_m10_gpios,
-				ARRAY_SIZE(visstrim_m10_gpios));
-	if (ret)
-		pr_err("Failed to request gpios (%d)\n", ret);
-
 	imx27_add_imx_ssi(0, &visstrim_m10_ssi_pdata);
 	imx27_add_imx_uart0(&uart_pdata);
 
@@ -566,12 +560,26 @@
 	imx27_add_mxc_mmc(0, &visstrim_m10_sdhc_pdata);
 	imx27_add_mxc_ehci_otg(&visstrim_m10_usbotg_pdata);
 	imx27_add_fec(NULL);
-	imx_add_gpio_keys(&visstrim_gpio_keys_platform_data);
+
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
+
+static void __init visstrim_m10_late_init(void)
+{
+	int mo_version, ret;
+
+	ret = gpio_request_array(visstrim_m10_gpios,
+				 ARRAY_SIZE(visstrim_m10_gpios));
+	if (ret)
+		pr_err("Failed to request gpios (%d)\n", ret);
+
+	imx_add_gpio_keys(&visstrim_gpio_keys_platform_data);
+
 	imx_add_platform_device("mx27vis", 0, NULL, 0, &snd_mx27vis_pdata,
 				sizeof(snd_mx27vis_pdata));
 	platform_device_register_resndata(NULL, "soc-camera-pdrv", 0, NULL, 0,
 				      &iclink_tvp5150, sizeof(iclink_tvp5150));
+
 	gpio_led_register_device(0, &visstrim_m10_led_data);
 
 	/* Use mother board version to decide what video devices we shall use */
@@ -591,6 +599,7 @@
 		visstrim_deinterlace_init();
 		visstrim_analog_camera_init();
 	}
+
 	visstrim_coda_init();
 }
 
@@ -607,5 +616,6 @@
 	.init_irq = mx27_init_irq,
 	.init_time	= visstrim_m10_timer_init,
 	.init_machine = visstrim_m10_board_init,
+	.init_late	= visstrim_m10_late_init,
 	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx6ul.c b/arch/arm/mach-imx/mach-imx6ul.c
index 6bb7d9c..58a2b88 100644
--- a/arch/arm/mach-imx/mach-imx6ul.c
+++ b/arch/arm/mach-imx/mach-imx6ul.c
@@ -16,6 +16,7 @@
 #include <asm/mach/map.h>
 
 #include "common.h"
+#include "cpuidle.h"
 
 static void __init imx6ul_enet_clk_init(void)
 {
@@ -80,6 +81,8 @@
 
 static void __init imx6ul_init_late(void)
 {
+	imx6sx_cpuidle_init();
+
 	if (IS_ENABLED(CONFIG_ARM_IMX6Q_CPUFREQ))
 		platform_device_register_simple("imx6q-cpufreq", -1, NULL, 0);
 }
diff --git a/arch/arm/mach-imx/mach-kzm_arm11_01.c b/arch/arm/mach-imx/mach-kzm_arm11_01.c
index 31df436..ab847e2 100644
--- a/arch/arm/mach-imx/mach-kzm_arm11_01.c
+++ b/arch/arm/mach-imx/mach-kzm_arm11_01.c
@@ -63,7 +63,7 @@
  */
 #define KZM_ARM11_16550		(MX31_CS4_BASE_ADDR + 0x1050)
 
-#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_8250)
 /*
  * KZM-ARM11-01 has an external UART on FPGA
  */
@@ -141,7 +141,7 @@
 /*
  * SMSC LAN9118
  */
-#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+#if IS_ENABLED(CONFIG_SMSC911X)
 static struct smsc911x_platform_config kzm_smsc9118_config = {
 	.phy_interface	= PHY_INTERFACE_MODE_MII,
 	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
@@ -201,7 +201,7 @@
 }
 #endif
 
-#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_IMX)
 static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
@@ -245,13 +245,17 @@
 
 	mxc_iomux_setup_multiple_pins(kzm_pins,
 				      ARRAY_SIZE(kzm_pins), "kzm");
-	kzm_init_ext_uart();
-	kzm_init_smsc9118();
 	kzm_init_imx_uart();
 
 	pr_info("Clock input source is 26MHz\n");
 }
 
+static void __init kzm_late_init(void)
+{
+	kzm_init_ext_uart();
+	kzm_init_smsc9118();
+}
+
 /*
  * This structure defines static mappings for the kzm-arm11-01 board.
  */
@@ -291,5 +295,6 @@
 	.init_irq = mx31_init_irq,
 	.init_time	= kzm_timer_init,
 	.init_machine = kzm_board_init,
+	.init_late	= kzm_late_init,
 	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c
index 9986f9a..5e36682 100644
--- a/arch/arm/mach-imx/mach-mx21ads.c
+++ b/arch/arm/mach-imx/mach-mx21ads.c
@@ -302,12 +302,16 @@
 	imx21_add_imx_uart0(&uart_pdata_rts);
 	imx21_add_imx_uart2(&uart_pdata_norts);
 	imx21_add_imx_uart3(&uart_pdata_rts);
-	imx21_add_mxc_mmc(0, &mx21ads_sdhc_pdata);
 	imx21_add_mxc_nand(&mx21ads_nand_board_info);
 
-	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-
 	imx21_add_imx_fb(&mx21ads_fb_data);
+}
+
+static void __init mx21ads_late_init(void)
+{
+	imx21_add_mxc_mmc(0, &mx21ads_sdhc_pdata);
+
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 
 	mx21ads_cs8900_resources[1].start =
 			gpio_to_irq(MX21ADS_CS8900A_IRQ_GPIO);
@@ -328,6 +332,7 @@
 	.init_early = imx21_init_early,
 	.init_irq = mx21_init_irq,
 	.init_time	= mx21ads_timer_init,
-	.init_machine = mx21ads_board_init,
+	.init_machine	= mx21ads_board_init,
+	.init_late	= mx21ads_late_init,
 	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c
index 9ef4640..7ba651a 100644
--- a/arch/arm/mach-imx/mach-mx27_3ds.c
+++ b/arch/arm/mach-imx/mach-mx27_3ds.c
@@ -485,17 +485,32 @@
 
 static void __init mx27pdk_init(void)
 {
-	int ret;
 	imx27_soc_init();
 
 	mxc_gpio_setup_multiple_pins(mx27pdk_pins, ARRAY_SIZE(mx27pdk_pins),
 		"mx27pdk");
-	mx27_3ds_sdhc1_enable_level_translator();
 	imx27_add_imx_uart0(&uart_pdata);
 	imx27_add_fec(NULL);
 	imx27_add_imx_keypad(&mx27_3ds_keymap_data);
-	imx27_add_mxc_mmc(0, &sdhc1_pdata);
 	imx27_add_imx2_wdt();
+
+	imx27_add_spi_imx1(&spi2_pdata);
+	imx27_add_spi_imx0(&spi1_pdata);
+
+	imx27_add_imx_i2c(0, &mx27_3ds_i2c0_data);
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+	imx27_add_imx_fb(&mx27_3ds_fb_data);
+
+	imx27_add_imx_ssi(0, &mx27_3ds_ssi_pdata);
+}
+
+static void __init mx27pdk_late_init(void)
+{
+	int ret;
+
+	mx27_3ds_sdhc1_enable_level_translator();
+	imx27_add_mxc_mmc(0, &sdhc1_pdata);
+
 	otg_phy_init();
 
 	if (otg_mode_host) {
@@ -509,17 +524,12 @@
 	if (!otg_mode_host)
 		imx27_add_fsl_usb2_udc(&otg_device_pdata);
 
-	imx27_add_spi_imx1(&spi2_pdata);
-	imx27_add_spi_imx0(&spi1_pdata);
 	mx27_3ds_spi_devs[0].irq = gpio_to_irq(PMIC_INT);
 	spi_register_board_info(mx27_3ds_spi_devs,
-						ARRAY_SIZE(mx27_3ds_spi_devs));
+				ARRAY_SIZE(mx27_3ds_spi_devs));
 
 	if (mxc_expio_init(MX27_CS5_BASE_ADDR, IMX_GPIO_NR(3, 28)))
 		pr_warn("Init of the debugboard failed, all devices on the debugboard are unusable.\n");
-	imx27_add_imx_i2c(0, &mx27_3ds_i2c0_data);
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-	imx27_add_imx_fb(&mx27_3ds_fb_data);
 
 	ret = gpio_request_array(mx27_3ds_camera_gpios,
 				 ARRAY_SIZE(mx27_3ds_camera_gpios));
@@ -529,7 +539,6 @@
 	}
 
 	imx27_add_mx2_camera(&mx27_3ds_cam_pdata);
-	imx27_add_imx_ssi(0, &mx27_3ds_ssi_pdata);
 
 	imx_add_platform_device("imx_mc13783", 0, NULL, 0, NULL, 0);
 }
@@ -547,5 +556,6 @@
 	.init_irq = mx27_init_irq,
 	.init_time	= mx27pdk_timer_init,
 	.init_machine = mx27pdk_init,
+	.init_late	= mx27pdk_late_init,
 	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c
index a4c389e..a04bb09 100644
--- a/arch/arm/mach-imx/mach-mx27ads.c
+++ b/arch/arm/mach-imx/mach-mx27ads.c
@@ -352,14 +352,20 @@
 	i2c_register_board_info(1, mx27ads_i2c_devices,
 				ARRAY_SIZE(mx27ads_i2c_devices));
 	imx27_add_imx_i2c(1, &mx27ads_i2c1_data);
-	mx27ads_regulator_init();
 	imx27_add_imx_fb(&mx27ads_fb_data);
+
+	imx27_add_fec(NULL);
+	imx27_add_mxc_w1();
+}
+
+static void __init mx27ads_late_init(void)
+{
+	mx27ads_regulator_init();
+
 	imx27_add_mxc_mmc(0, &sdhc1_pdata);
 	imx27_add_mxc_mmc(1, &sdhc2_pdata);
 
-	imx27_add_fec(NULL);
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-	imx27_add_mxc_w1();
 }
 
 static void __init mx27ads_timer_init(void)
@@ -395,5 +401,6 @@
 	.init_irq = mx27_init_irq,
 	.init_time	= mx27ads_timer_init,
 	.init_machine = mx27ads_board_init,
+	.init_late	= mx27ads_late_init,
 	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c
index 65a0dc0..12b8a52 100644
--- a/arch/arm/mach-imx/mach-mx31_3ds.c
+++ b/arch/arm/mach-imx/mach-mx31_3ds.c
@@ -694,8 +694,6 @@
 
 static void __init mx31_3ds_init(void)
 {
-	int ret;
-
 	imx31_soc_init();
 
 	/* Configure SPI1 IOMUX */
@@ -708,14 +706,31 @@
 	imx31_add_mxc_nand(&mx31_3ds_nand_board_info);
 
 	imx31_add_spi_imx1(&spi1_pdata);
-	mx31_3ds_spi_devs[0].irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
-	spi_register_board_info(mx31_3ds_spi_devs,
-						ARRAY_SIZE(mx31_3ds_spi_devs));
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
 
 	imx31_add_imx_keypad(&mx31_3ds_keymap_data);
 
+	imx31_add_imx2_wdt();
+	imx31_add_imx_i2c0(&mx31_3ds_i2c0_data);
+
+	imx31_add_spi_imx0(&spi0_pdata);
+	imx31_add_ipu_core();
+	imx31_add_mx3_sdc_fb(&mx3fb_pdata);
+
+	imx31_add_imx_ssi(0, &mx31_3ds_ssi_pdata);
+
+	imx_add_platform_device("imx_mc13783", 0, NULL, 0, NULL, 0);
+}
+
+static void __init mx31_3ds_late(void)
+{
+	int ret;
+
+	mx31_3ds_spi_devs[0].irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
+	spi_register_board_info(mx31_3ds_spi_devs,
+				ARRAY_SIZE(mx31_3ds_spi_devs));
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+
 	mx31_3ds_usbotg_init();
 	if (otg_mode_host) {
 		otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
@@ -733,14 +748,9 @@
 
 	if (mxc_expio_init(MX31_CS5_BASE_ADDR, IOMUX_TO_GPIO(MX31_PIN_GPIO1_1)))
 		printk(KERN_WARNING "Init of the debug board failed, all "
-				    "devices on the debug board are unusable.\n");
-	imx31_add_imx2_wdt();
-	imx31_add_imx_i2c0(&mx31_3ds_i2c0_data);
-	imx31_add_mxc_mmc(0, &sdhc1_pdata);
+		       "devices on the debug board are unusable.\n");
 
-	imx31_add_spi_imx0(&spi0_pdata);
-	imx31_add_ipu_core();
-	imx31_add_mx3_sdc_fb(&mx3fb_pdata);
+	imx31_add_mxc_mmc(0, &sdhc1_pdata);
 
 	/* CSI */
 	/* Camera power: default - off */
@@ -752,10 +762,6 @@
 	}
 
 	mx31_3ds_init_camera();
-
-	imx31_add_imx_ssi(0, &mx31_3ds_ssi_pdata);
-
-	imx_add_platform_device("imx_mc13783", 0, NULL, 0, NULL, 0);
 }
 
 static void __init mx31_3ds_timer_init(void)
@@ -778,6 +784,7 @@
 	.init_irq = mx31_init_irq,
 	.init_time	= mx31_3ds_timer_init,
 	.init_machine = mx31_3ds_init,
+	.init_late	= mx31_3ds_late,
 	.reserve = mx31_3ds_reserve,
 	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx31ads.c b/arch/arm/mach-imx/mach-mx31ads.c
index 4f2c56d..766b8b9 100644
--- a/arch/arm/mach-imx/mach-mx31ads.c
+++ b/arch/arm/mach-imx/mach-mx31ads.c
@@ -554,20 +554,19 @@
 	iotable_init(mx31ads_io_desc, ARRAY_SIZE(mx31ads_io_desc));
 }
 
-static void __init mx31ads_init_irq(void)
-{
-	mx31_init_irq();
-	mx31ads_init_expio();
-}
-
 static void __init mx31ads_init(void)
 {
 	imx31_soc_init();
 
-	mxc_init_extuart();
 	mxc_init_imx_uart();
-	mxc_init_i2c();
 	mxc_init_audio();
+}
+
+static void __init mx31ads_late(void)
+{
+	mx31ads_init_expio();
+	mxc_init_extuart();
+	mxc_init_i2c();
 	mxc_init_ext_ethernet();
 }
 
@@ -581,8 +580,9 @@
 	.atag_offset = 0x100,
 	.map_io = mx31ads_map_io,
 	.init_early = imx31_init_early,
-	.init_irq = mx31ads_init_irq,
+	.init_irq	= mx31_init_irq,
 	.init_time	= mx31ads_timer_init,
 	.init_machine = mx31ads_init,
+	.init_late	= mx31ads_late,
 	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx31lilly.c b/arch/arm/mach-imx/mach-mx31lilly.c
index e9549a3..6fd4636 100644
--- a/arch/arm/mach-imx/mach-mx31lilly.c
+++ b/arch/arm/mach-imx/mach-mx31lilly.c
@@ -56,6 +56,26 @@
  * appropriate baseboard support code.
  */
 
+static unsigned int mx31lilly_pins[] __initdata = {
+	MX31_PIN_CTS1__CTS1,
+	MX31_PIN_RTS1__RTS1,
+	MX31_PIN_TXD1__TXD1,
+	MX31_PIN_RXD1__RXD1,
+	MX31_PIN_CTS2__CTS2,
+	MX31_PIN_RTS2__RTS2,
+	MX31_PIN_TXD2__TXD2,
+	MX31_PIN_RXD2__RXD2,
+	MX31_PIN_CSPI3_MOSI__RXD3,
+	MX31_PIN_CSPI3_MISO__TXD3,
+	MX31_PIN_CSPI3_SCLK__RTS3,
+	MX31_PIN_CSPI3_SPI_RDY__CTS3,
+};
+
+/* UART */
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
 /* SMSC ethernet support */
 
 static struct resource smsc91x_resources[] = {
@@ -252,16 +272,12 @@
 {
 	imx31_soc_init();
 
-	switch (mx31lilly_baseboard) {
-	case MX31LILLY_NOBOARD:
-		break;
-	case MX31LILLY_DB:
-		mx31lilly_db_init();
-		break;
-	default:
-		printk(KERN_ERR "Illegal mx31lilly_baseboard type %d\n",
-			mx31lilly_baseboard);
-	}
+	mxc_iomux_setup_multiple_pins(mx31lilly_pins,
+				      ARRAY_SIZE(mx31lilly_pins), "mx31lily");
+
+	imx31_add_imx_uart0(&uart_pdata);
+	imx31_add_imx_uart1(&uart_pdata);
+	imx31_add_imx_uart2(&uart_pdata);
 
 	mxc_iomux_alloc_pin(MX31_PIN_CS4__CS4, "Ethernet CS");
 
@@ -284,10 +300,17 @@
 
 	imx31_add_spi_imx0(&spi0_pdata);
 	imx31_add_spi_imx1(&spi1_pdata);
-	mc13783_dev.irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
-	spi_register_board_info(&mc13783_dev, 1);
 
 	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+}
+
+static void __init mx31lilly_late_init(void)
+{
+	if (mx31lilly_baseboard == MX31LILLY_DB)
+		mx31lilly_db_init();
+
+	mc13783_dev.irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
+	spi_register_board_info(&mc13783_dev, 1);
 
 	smsc91x_resources[1].start =
 			gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_0));
@@ -310,6 +333,7 @@
 	.init_early = imx31_init_early,
 	.init_irq = mx31_init_irq,
 	.init_time	= mx31lilly_timer_init,
-	.init_machine = mx31lilly_board_init,
+	.init_machine	= mx31lilly_board_init,
+	.init_late	= mx31lilly_late_init,
 	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c
index 4822a17..f033a57 100644
--- a/arch/arm/mach-imx/mach-mx31lite.c
+++ b/arch/arm/mach-imx/mach-mx31lite.c
@@ -52,6 +52,19 @@
  */
 
 static unsigned int mx31lite_pins[] = {
+	/* UART1 */
+	MX31_PIN_CTS1__CTS1,
+	MX31_PIN_RTS1__RTS1,
+	MX31_PIN_TXD1__TXD1,
+	MX31_PIN_RXD1__RXD1,
+	/* SPI 0 */
+	MX31_PIN_CSPI1_SCLK__SCLK,
+	MX31_PIN_CSPI1_MOSI__MOSI,
+	MX31_PIN_CSPI1_MISO__MISO,
+	MX31_PIN_CSPI1_SPI_RDY__SPI_RDY,
+	MX31_PIN_CSPI1_SS0__SS0,
+	MX31_PIN_CSPI1_SS1__SS1,
+	MX31_PIN_CSPI1_SS2__SS2,
 	/* LAN9117 IRQ pin */
 	IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_GPIO),
 	/* SPI 1 */
@@ -64,6 +77,23 @@
 	MX31_PIN_CSPI2_SS2__SS2,
 };
 
+/* UART */
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+/* SPI */
+static int spi0_internal_chipselect[] = {
+	MXC_SPI_CS(0),
+	MXC_SPI_CS(1),
+	MXC_SPI_CS(2),
+};
+
+static const struct spi_imx_master spi0_pdata __initconst = {
+	.chipselect	= spi0_internal_chipselect,
+	.num_chipselect	= ARRAY_SIZE(spi0_internal_chipselect),
+};
+
 static const struct mxc_nand_platform_data
 mx31lite_nand_board_info __initconst  = {
 	.width = 1,
@@ -103,13 +133,13 @@
  * The MC13783 is the only hard-wired SPI device on the module.
  */
 
-static int spi_internal_chipselect[] = {
+static int spi1_internal_chipselect[] = {
 	MXC_SPI_CS(0),
 };
 
 static const struct spi_imx_master spi1_pdata __initconst = {
-	.chipselect	= spi_internal_chipselect,
-	.num_chipselect	= ARRAY_SIZE(spi_internal_chipselect),
+	.chipselect	= spi1_internal_chipselect,
+	.num_chipselect	= ARRAY_SIZE(spi1_internal_chipselect),
 };
 
 static struct mc13xxx_platform_data mc13783_pdata __initdata = {
@@ -200,8 +230,6 @@
 	.num_resources = 1,
 };
 
-
-
 /*
  * This structure defines the MX31 memory map.
  */
@@ -233,29 +261,30 @@
 
 static void __init mx31lite_init(void)
 {
-	int ret;
-
 	imx31_soc_init();
 
-	switch (mx31lite_baseboard) {
-	case MX31LITE_NOBOARD:
-		break;
-	case MX31LITE_DB:
-		mx31lite_db_init();
-		break;
-	default:
-		printk(KERN_ERR "Illegal mx31lite_baseboard type %d\n",
-				mx31lite_baseboard);
-	}
-
 	mxc_iomux_setup_multiple_pins(mx31lite_pins, ARRAY_SIZE(mx31lite_pins),
 				      "mx31lite");
 
+	imx31_add_imx_uart0(&uart_pdata);
+	imx31_add_spi_imx0(&spi0_pdata);
+
 	/* NOR and NAND flash */
 	platform_device_register(&physmap_flash_device);
 	imx31_add_mxc_nand(&mx31lite_nand_board_info);
 
 	imx31_add_spi_imx1(&spi1_pdata);
+
+	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+}
+
+static void __init mx31lite_late(void)
+{
+	int ret;
+
+	if (mx31lite_baseboard == MX31LITE_DB)
+		mx31lite_db_init();
+
 	mc13783_spi_dev.irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
 	spi_register_board_info(&mc13783_spi_dev, 1);
 
@@ -265,8 +294,6 @@
 	if (usbh2_pdata.otg)
 		imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
 
-	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-
 	/* SMSC9117 IRQ pin */
 	ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_SFS6), "sms9117-irq");
 	if (ret)
@@ -294,5 +321,6 @@
 	.init_irq = mx31_init_irq,
 	.init_time	= mx31lite_timer_init,
 	.init_machine = mx31lite_init,
+	.init_late	= mx31lite_late,
 	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c
index 4f2d998..cc86768 100644
--- a/arch/arm/mach-imx/mach-mx31moboard.c
+++ b/arch/arm/mach-imx/mach-mx31moboard.c
@@ -526,11 +526,9 @@
 		"moboard");
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
-	gpio_led_register_device(-1, &mx31moboard_led_pdata);
 
 	imx31_add_imx2_wdt();
 
-	moboard_uart0_init();
 	imx31_add_imx_uart0(&uart0_pdata);
 	imx31_add_imx_uart4(&uart4_pdata);
 
@@ -540,6 +538,19 @@
 	imx31_add_spi_imx1(&moboard_spi1_pdata);
 	imx31_add_spi_imx2(&moboard_spi2_pdata);
 
+	mx31moboard_init_cam();
+
+	imx31_add_imx_ssi(0, &moboard_ssi_pdata);
+
+	pm_power_off = mx31moboard_poweroff;
+}
+
+static void __init mx31moboard_late(void)
+{
+	gpio_led_register_device(-1, &mx31moboard_led_pdata);
+
+	moboard_uart0_init();
+
 	gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3), "pmic-irq");
 	gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
 	moboard_spi_board_info[0].irq =
@@ -549,18 +560,11 @@
 
 	imx31_add_mxc_mmc(0, &sdhc1_pdata);
 
-	mx31moboard_init_cam();
-
 	usb_xcvr_reset();
-
 	moboard_usbh2_init();
 
-	imx31_add_imx_ssi(0, &moboard_ssi_pdata);
-
 	imx_add_platform_device("imx_mc13783", 0, NULL, 0, NULL, 0);
 
-	pm_power_off = mx31moboard_poweroff;
-
 	switch (mx31moboard_baseboard) {
 	case MX31NOBOARD:
 		break;
@@ -601,5 +605,6 @@
 	.init_irq = mx31_init_irq,
 	.init_time	= mx31moboard_timer_init,
 	.init_machine = mx31moboard_init,
+	.init_late	= mx31moboard_late,
 	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c
index 7e315f0..c8c2e09 100644
--- a/arch/arm/mach-imx/mach-mx35_3ds.c
+++ b/arch/arm/mach-imx/mach-mx35_3ds.c
@@ -555,8 +555,6 @@
  */
 static void __init mx35_3ds_init(void)
 {
-	struct platform_device *imx35_fb_pdev;
-
 	imx35_soc_init();
 
 	mxc_iomux_v3_setup_multiple_pads(mx35pdk_pads, ARRAY_SIZE(mx35pdk_pads));
@@ -579,9 +577,6 @@
 	imx35_add_mxc_nand(&mx35pdk_nand_board_info);
 	imx35_add_sdhci_esdhc_imx(0, NULL);
 
-	if (mxc_expio_init(MX35_CS5_BASE_ADDR, IMX_GPIO_NR(1, 1)))
-		pr_warn("Init of the debugboard failed, all "
-				"devices on the debugboard are unusable.\n");
 	imx35_add_imx_i2c0(&mx35_3ds_i2c0_data);
 
 	i2c_register_board_info(
@@ -590,6 +585,15 @@
 	imx35_add_ipu_core();
 	platform_device_register(&mx35_3ds_ov2640);
 	imx35_3ds_init_camera();
+}
+
+static void __init mx35_3ds_late_init(void)
+{
+	struct platform_device *imx35_fb_pdev;
+
+	if (mxc_expio_init(MX35_CS5_BASE_ADDR, IMX_GPIO_NR(1, 1)))
+		pr_warn("Init of the debugboard failed, all "
+			"devices on the debugboard are unusable.\n");
 
 	imx35_fb_pdev = imx35_add_mx3_sdc_fb(&mx3fb_pdata);
 	mx35_3ds_lcd.dev.parent = &imx35_fb_pdev->dev;
@@ -618,6 +622,7 @@
 	.init_irq = mx35_init_irq,
 	.init_time	= mx35pdk_timer_init,
 	.init_machine = mx35_3ds_init,
+	.init_late	= mx35_3ds_late_init,
 	.reserve = mx35_3ds_reserve,
 	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c
index 2d1c50b..ed67586 100644
--- a/arch/arm/mach-imx/mach-pca100.c
+++ b/arch/arm/mach-imx/mach-pca100.c
@@ -362,12 +362,8 @@
 	if (ret)
 		printk(KERN_ERR "pca100: Failed to setup pins (%d)\n", ret);
 
-	imx27_add_imx_ssi(0, &pca100_ssi_pdata);
-
 	imx27_add_imx_uart0(&uart_pdata);
 
-	imx27_add_mxc_mmc(1, &sdhc_pdata);
-
 	imx27_add_mxc_nand(&pca100_nand_board_info);
 
 	/* only the i2c master 1 is used on this CPU card */
@@ -382,6 +378,19 @@
 				ARRAY_SIZE(pca100_spi_board_info));
 	imx27_add_spi_imx0(&pca100_spi0_data);
 
+	imx27_add_imx_fb(&pca100_fb_data);
+
+	imx27_add_fec(NULL);
+	imx27_add_imx2_wdt();
+	imx27_add_mxc_w1();
+}
+
+static void __init pca100_late_init(void)
+{
+	imx27_add_imx_ssi(0, &pca100_ssi_pdata);
+
+	imx27_add_mxc_mmc(1, &sdhc_pdata);
+
 	gpio_request(OTG_PHY_CS_GPIO, "usb-otg-cs");
 	gpio_direction_output(OTG_PHY_CS_GPIO, 1);
 	gpio_request(USBH2_PHY_CS_GPIO, "usb-host2-cs");
@@ -403,12 +412,6 @@
 
 	if (usbh2_pdata.otg)
 		imx27_add_mxc_ehci_hs(2, &usbh2_pdata);
-
-	imx27_add_imx_fb(&pca100_fb_data);
-
-	imx27_add_fec(NULL);
-	imx27_add_imx2_wdt();
-	imx27_add_mxc_w1();
 }
 
 static void __init pca100_timer_init(void)
@@ -421,7 +424,8 @@
 	.map_io = mx27_map_io,
 	.init_early = imx27_init_early,
 	.init_irq = mx27_init_irq,
-	.init_machine = pca100_init,
+	.init_machine	= pca100_init,
+	.init_late	= pca100_late_init,
 	.init_time	= pca100_timer_init,
 	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c
index 6d87941..9f0f55b 100644
--- a/arch/arm/mach-imx/mach-pcm037.c
+++ b/arch/arm/mach-imx/mach-pcm037.c
@@ -149,7 +149,7 @@
 	MX31_PIN_CONTRAST__CONTRAST,
 	MX31_PIN_D3_SPL__D3_SPL,
 	MX31_PIN_D3_CLS__D3_CLS,
-	MX31_PIN_LCS0__GPI03_23,
+	MX31_PIN_LCS0__GPIO3_23,
 	/* CSI */
 	IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_GPIO),
 	MX31_PIN_CSI_D6__CSI_D6,
@@ -576,8 +576,6 @@
  */
 static void __init pcm037_init(void)
 {
-	int ret;
-
 	imx31_soc_init();
 
 	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
@@ -621,20 +619,6 @@
 
 	imx31_add_mxc_w1();
 
-	/* LAN9217 IRQ pin */
-	ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1), "lan9217-irq");
-	if (ret)
-		pr_warn("could not get LAN irq gpio\n");
-	else {
-		gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1));
-		smsc911x_resources[1].start =
-			gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1));
-		smsc911x_resources[1].end =
-			gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1));
-		platform_device_register(&pcm037_eth);
-	}
-
-
 	/* I2C adapters and devices */
 	i2c_register_board_info(1, pcm037_i2c_devices,
 			ARRAY_SIZE(pcm037_i2c_devices));
@@ -643,10 +627,56 @@
 	imx31_add_imx_i2c2(&pcm037_i2c2_data);
 
 	imx31_add_mxc_nand(&pcm037_nand_board_info);
-	imx31_add_mxc_mmc(0, &sdhc_pdata);
 	imx31_add_ipu_core();
 	imx31_add_mx3_sdc_fb(&mx3fb_pdata);
 
+	if (otg_mode_host) {
+		otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
+				ULPI_OTG_DRVVBUS_EXT);
+		if (otg_pdata.otg)
+			imx31_add_mxc_ehci_otg(&otg_pdata);
+	}
+
+	usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
+			ULPI_OTG_DRVVBUS_EXT);
+	if (usbh2_pdata.otg)
+		imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
+
+	if (!otg_mode_host)
+		imx31_add_fsl_usb2_udc(&otg_device_pdata);
+}
+
+static void __init pcm037_timer_init(void)
+{
+	mx31_clocks_init(26000000);
+}
+
+static void __init pcm037_reserve(void)
+{
+	/* reserve 4 MiB for mx3-camera */
+	mx3_camera_base = arm_memblock_steal(MX3_CAMERA_BUF_SIZE,
+			MX3_CAMERA_BUF_SIZE);
+}
+
+static void __init pcm037_init_late(void)
+{
+	int ret;
+
+	/* LAN9217 IRQ pin */
+	ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1), "lan9217-irq");
+	if (!ret) {
+		gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1));
+		smsc911x_resources[1].start =
+			gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1));
+		smsc911x_resources[1].end =
+			gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1));
+		platform_device_register(&pcm037_eth);
+	} else {
+		pr_warn("could not get LAN irq gpio\n");
+	}
+
+	imx31_add_mxc_mmc(0, &sdhc_pdata);
+
 	/* CSI */
 	/* Camera power: default - off */
 	ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), "mt9t031-power");
@@ -663,37 +693,6 @@
 			gpio_to_irq(IOMUX_TO_GPIO(IOMUX_PIN(48, 105)));
 	platform_device_register(&pcm970_sja1000);
 
-	if (otg_mode_host) {
-		otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
-				ULPI_OTG_DRVVBUS_EXT);
-		if (otg_pdata.otg)
-			imx31_add_mxc_ehci_otg(&otg_pdata);
-	}
-
-	usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
-			ULPI_OTG_DRVVBUS_EXT);
-	if (usbh2_pdata.otg)
-		imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
-
-	if (!otg_mode_host)
-		imx31_add_fsl_usb2_udc(&otg_device_pdata);
-
-}
-
-static void __init pcm037_timer_init(void)
-{
-	mx31_clocks_init(26000000);
-}
-
-static void __init pcm037_reserve(void)
-{
-	/* reserve 4 MiB for mx3-camera */
-	mx3_camera_base = arm_memblock_steal(MX3_CAMERA_BUF_SIZE,
-			MX3_CAMERA_BUF_SIZE);
-}
-
-static void __init pcm037_init_late(void)
-{
 	pcm037_eet_init_devices();
 }
 
diff --git a/arch/arm/mach-imx/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c
index e447e59..78e2bf8 100644
--- a/arch/arm/mach-imx/mach-pcm043.c
+++ b/arch/arm/mach-imx/mach-pcm043.c
@@ -363,7 +363,6 @@
 
 	imx35_add_imx_uart0(&uart_pdata);
 	imx35_add_mxc_nand(&pcm037_nand_board_info);
-	imx35_add_imx_ssi(0, &pcm043_ssi_pdata);
 
 	imx35_add_imx_uart1(&uart_pdata);
 
@@ -387,6 +386,12 @@
 		imx35_add_fsl_usb2_udc(&otg_device_pdata);
 
 	imx35_add_flexcan1();
+}
+
+static void __init pcm043_late_init(void)
+{
+	imx35_add_imx_ssi(0, &pcm043_ssi_pdata);
+
 	imx35_add_sdhci_esdhc_imx(0, &sd1_pdata);
 }
 
@@ -402,6 +407,7 @@
 	.init_early = imx35_init_early,
 	.init_irq = mx35_init_irq,
 	.init_time = pcm043_timer_init,
-	.init_machine = pcm043_init,
+	.init_machine	= pcm043_init,
+	.init_late	= pcm043_late_init,
 	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-qong.c b/arch/arm/mach-imx/mach-qong.c
index 34df64f..8c2cbd6 100644
--- a/arch/arm/mach-imx/mach-qong.c
+++ b/arch/arm/mach-imx/mach-qong.c
@@ -251,7 +251,6 @@
 
 	mxc_init_imx_uart();
 	qong_init_nor_mtd();
-	qong_init_fpga();
 	imx31_add_imx2_wdt();
 }
 
@@ -268,5 +267,6 @@
 	.init_irq = mx31_init_irq,
 	.init_time	= qong_timer_init,
 	.init_machine = qong_init,
+	.init_late	= qong_init_fpga,
 	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-scb9328.c b/arch/arm/mach-imx/mach-scb9328.c
deleted file mode 100644
index 1f6bc3f..0000000
--- a/arch/arm/mach-imx/mach-scb9328.c
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
- * linux/arch/arm/mach-mx1/mach-scb9328.c
- *
- * Copyright (c) 2004 Sascha Hauer <saschahauer@web.de>
- * Copyright (c) 2006-2008 Juergen Beisert <jbeisert@netscape.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/interrupt.h>
-#include <linux/dm9000.h>
-#include <linux/gpio.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "common.h"
-#include "devices-imx1.h"
-#include "hardware.h"
-#include "iomux-mx1.h"
-
-/*
- * This scb9328 has a 32MiB flash
- */
-static struct resource flash_resource = {
-	.start	= MX1_CS0_PHYS,
-	.end	= MX1_CS0_PHYS + (32 * 1024 * 1024) - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct physmap_flash_data scb_flash_data = {
-	.width  = 2,
-};
-
-static struct platform_device scb_flash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev = {
-		.platform_data = &scb_flash_data,
-	},
-	.resource = &flash_resource,
-	.num_resources = 1,
-};
-
-/*
- * scb9328 has a DM9000 network controller
- * connected to CS5, with 16 bit data path
- * and interrupt connected to GPIO 3
- */
-
-/*
- * internal datapath is fixed 16 bit
- */
-static struct dm9000_plat_data dm9000_platdata = {
-	.flags	= DM9000_PLATF_16BITONLY,
-};
-
-/*
- * the DM9000 drivers wants two defined address spaces
- * to gain access to address latch registers and the data path.
- */
-static struct resource dm9000x_resources[] = {
-	{
-		.name	= "address area",
-		.start	= MX1_CS5_PHYS,
-		.end	= MX1_CS5_PHYS + 1,
-		.flags	= IORESOURCE_MEM,	/* address access */
-	}, {
-		.name	= "data area",
-		.start	= MX1_CS5_PHYS + 4,
-		.end	= MX1_CS5_PHYS + 5,
-		.flags	= IORESOURCE_MEM,	/* data access */
-	}, {
-		/* irq number is run-time assigned */
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
-	},
-};
-
-static struct platform_device dm9000x_device = {
-	.name		= "dm9000",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(dm9000x_resources),
-	.resource	= dm9000x_resources,
-	.dev		= {
-		.platform_data = &dm9000_platdata,
-	}
-};
-
-static const int mxc_uart1_pins[] = {
-	PC9_PF_UART1_CTS,
-	PC10_PF_UART1_RTS,
-	PC11_PF_UART1_TXD,
-	PC12_PF_UART1_RXD,
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&scb_flash_device,
-	&dm9000x_device,
-};
-
-/*
- * scb9328_init - Init the CPU card itself
- */
-static void __init scb9328_init(void)
-{
-	imx1_soc_init();
-
-	mxc_gpio_setup_multiple_pins(mxc_uart1_pins,
-			ARRAY_SIZE(mxc_uart1_pins), "UART1");
-
-	imx1_add_imx_uart0(&uart_pdata);
-
-	printk(KERN_INFO"Scb9328: Adding devices\n");
-	dm9000x_resources[2].start = gpio_to_irq(IMX_GPIO_NR(3, 3));
-	dm9000x_resources[2].end = gpio_to_irq(IMX_GPIO_NR(3, 3));
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-static void __init scb9328_timer_init(void)
-{
-	mx1_clocks_init(32000);
-}
-
-MACHINE_START(SCB9328, "Synertronixx scb9328")
-	/* Sascha Hauer */
-	.atag_offset = 100,
-	.map_io = mx1_map_io,
-	.init_early = imx1_init_early,
-	.init_irq = mx1_init_irq,
-	.init_time	= scb9328_timer_init,
-	.init_machine = scb9328_init,
-	.restart	= mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-vpr200.c b/arch/arm/mach-imx/mach-vpr200.c
index 27a8f7e..5ff154c 100644
--- a/arch/arm/mach-imx/mach-vpr200.c
+++ b/arch/arm/mach-imx/mach-vpr200.c
@@ -268,6 +268,22 @@
 
 	imx35_add_fec(NULL);
 	imx35_add_imx2_wdt();
+
+	imx35_add_imx_uart0(NULL);
+	imx35_add_imx_uart2(NULL);
+
+	imx35_add_ipu_core();
+	imx35_add_mx3_sdc_fb(&mx3fb_pdata);
+
+	imx35_add_fsl_usb2_udc(&otg_device_pdata);
+	imx35_add_mxc_ehci_hs(&usb_host_pdata);
+
+	imx35_add_mxc_nand(&vpr200_nand_board_info);
+	imx35_add_sdhci_esdhc_imx(0, NULL);
+}
+
+static void __init vpr200_late_init(void)
+{
 	imx_add_gpio_keys(&vpr200_gpio_keys_data);
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
@@ -282,18 +298,6 @@
 	else
 		gpio_direction_input(GPIO_PMIC_INT);
 
-	imx35_add_imx_uart0(NULL);
-	imx35_add_imx_uart2(NULL);
-
-	imx35_add_ipu_core();
-	imx35_add_mx3_sdc_fb(&mx3fb_pdata);
-
-	imx35_add_fsl_usb2_udc(&otg_device_pdata);
-	imx35_add_mxc_ehci_hs(&usb_host_pdata);
-
-	imx35_add_mxc_nand(&vpr200_nand_board_info);
-	imx35_add_sdhci_esdhc_imx(0, NULL);
-
 	vpr200_i2c_devices[1].irq = gpio_to_irq(GPIO_PMIC_INT);
 	i2c_register_board_info(0, vpr200_i2c_devices,
 			ARRAY_SIZE(vpr200_i2c_devices));
@@ -313,5 +317,6 @@
 	.init_irq = mx35_init_irq,
 	.init_time = vpr200_timer_init,
 	.init_machine = vpr200_board_init,
+	.init_late	= vpr200_late_init,
 	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mm-imx1.c b/arch/arm/mach-imx/mm-imx1.c
deleted file mode 100644
index 9a42f19..0000000
--- a/arch/arm/mach-imx/mm-imx1.c
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- *  author: Sascha Hauer
- *  Created: april 20th, 2004
- *  Copyright: Synertronixx GmbH
- *
- *  Common code for i.MX1 machines
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/pinctrl/machine.h>
-
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include "devices/devices-common.h"
-#include "hardware.h"
-#include "iomux-v1.h"
-
-static struct map_desc imx_io_desc[] __initdata = {
-	imx_map_entry(MX1, IO, MT_DEVICE),
-};
-
-void __init mx1_map_io(void)
-{
-	iotable_init(imx_io_desc, ARRAY_SIZE(imx_io_desc));
-}
-
-void __init imx1_init_early(void)
-{
-	mxc_set_cpu_type(MXC_CPU_MX1);
-	imx_iomuxv1_init(MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR),
-			MX1_NUM_GPIO_PORT);
-}
-
-void __init mx1_init_irq(void)
-{
-	mxc_init_irq(MX1_IO_ADDRESS(MX1_AVIC_BASE_ADDR));
-}
-
-void __init imx1_soc_init(void)
-{
-	imx1_reset_init(MX1_IO_ADDRESS(MX1_WDT_BASE_ADDR));
-	mxc_device_init();
-
-	mxc_register_gpio("imx1-gpio", 0, MX1_GPIO1_BASE_ADDR, SZ_256,
-						MX1_GPIO_INT_PORTA, 0);
-	mxc_register_gpio("imx1-gpio", 1, MX1_GPIO2_BASE_ADDR, SZ_256,
-						MX1_GPIO_INT_PORTB, 0);
-	mxc_register_gpio("imx1-gpio", 2, MX1_GPIO3_BASE_ADDR, SZ_256,
-						MX1_GPIO_INT_PORTC, 0);
-	mxc_register_gpio("imx1-gpio", 3, MX1_GPIO4_BASE_ADDR, SZ_256,
-						MX1_GPIO_INT_PORTD, 0);
-	imx_add_imx_dma("imx1-dma", MX1_DMA_BASE_ADDR,
-			MX1_DMA_INT, MX1_DMA_ERR);
-	pinctrl_provide_dummies();
-}
diff --git a/arch/arm/mach-imx/mx1.h b/arch/arm/mach-imx/mx1.h
deleted file mode 100644
index 45bd31c..0000000
--- a/arch/arm/mach-imx/mx1.h
+++ /dev/null
@@ -1,172 +0,0 @@
-/*
- * Copyright (C) 1997,1998 Russell King
- * Copyright (C) 1999 ARM Limited
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (c) 2008 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __MACH_MX1_H__
-#define __MACH_MX1_H__
-
-/*
- * Memory map
- */
-#define MX1_IO_BASE_ADDR	0x00200000
-#define MX1_IO_SIZE		SZ_1M
-
-#define MX1_CS0_PHYS		0x10000000
-#define MX1_CS0_SIZE		0x02000000
-
-#define MX1_CS1_PHYS		0x12000000
-#define MX1_CS1_SIZE		0x01000000
-
-#define MX1_CS2_PHYS		0x13000000
-#define MX1_CS2_SIZE		0x01000000
-
-#define MX1_CS3_PHYS		0x14000000
-#define MX1_CS3_SIZE		0x01000000
-
-#define MX1_CS4_PHYS		0x15000000
-#define MX1_CS4_SIZE		0x01000000
-
-#define MX1_CS5_PHYS		0x16000000
-#define MX1_CS5_SIZE		0x01000000
-
-/*
- *  Register BASEs, based on OFFSETs
- */
-#define MX1_AIPI1_BASE_ADDR		(0x00000 + MX1_IO_BASE_ADDR)
-#define MX1_WDT_BASE_ADDR		(0x01000 + MX1_IO_BASE_ADDR)
-#define MX1_TIM1_BASE_ADDR		(0x02000 + MX1_IO_BASE_ADDR)
-#define MX1_TIM2_BASE_ADDR		(0x03000 + MX1_IO_BASE_ADDR)
-#define MX1_RTC_BASE_ADDR		(0x04000 + MX1_IO_BASE_ADDR)
-#define MX1_LCDC_BASE_ADDR		(0x05000 + MX1_IO_BASE_ADDR)
-#define MX1_UART1_BASE_ADDR		(0x06000 + MX1_IO_BASE_ADDR)
-#define MX1_UART2_BASE_ADDR		(0x07000 + MX1_IO_BASE_ADDR)
-#define MX1_PWM_BASE_ADDR		(0x08000 + MX1_IO_BASE_ADDR)
-#define MX1_DMA_BASE_ADDR		(0x09000 + MX1_IO_BASE_ADDR)
-#define MX1_AIPI2_BASE_ADDR		(0x10000 + MX1_IO_BASE_ADDR)
-#define MX1_SIM_BASE_ADDR		(0x11000 + MX1_IO_BASE_ADDR)
-#define MX1_USBD_BASE_ADDR		(0x12000 + MX1_IO_BASE_ADDR)
-#define MX1_CSPI1_BASE_ADDR		(0x13000 + MX1_IO_BASE_ADDR)
-#define MX1_MMC_BASE_ADDR		(0x14000 + MX1_IO_BASE_ADDR)
-#define MX1_ASP_BASE_ADDR		(0x15000 + MX1_IO_BASE_ADDR)
-#define MX1_BTA_BASE_ADDR		(0x16000 + MX1_IO_BASE_ADDR)
-#define MX1_I2C_BASE_ADDR		(0x17000 + MX1_IO_BASE_ADDR)
-#define MX1_SSI_BASE_ADDR		(0x18000 + MX1_IO_BASE_ADDR)
-#define MX1_CSPI2_BASE_ADDR		(0x19000 + MX1_IO_BASE_ADDR)
-#define MX1_MSHC_BASE_ADDR		(0x1A000 + MX1_IO_BASE_ADDR)
-#define MX1_CCM_BASE_ADDR		(0x1B000 + MX1_IO_BASE_ADDR)
-#define MX1_SCM_BASE_ADDR		(0x1B804 + MX1_IO_BASE_ADDR)
-#define MX1_GPIO_BASE_ADDR		(0x1C000 + MX1_IO_BASE_ADDR)
-#define MX1_GPIO1_BASE_ADDR		(0x1C000 + MX1_IO_BASE_ADDR)
-#define MX1_GPIO2_BASE_ADDR		(0x1C100 + MX1_IO_BASE_ADDR)
-#define MX1_GPIO3_BASE_ADDR		(0x1C200 + MX1_IO_BASE_ADDR)
-#define MX1_GPIO4_BASE_ADDR		(0x1C300 + MX1_IO_BASE_ADDR)
-#define MX1_EIM_BASE_ADDR		(0x20000 + MX1_IO_BASE_ADDR)
-#define MX1_SDRAMC_BASE_ADDR		(0x21000 + MX1_IO_BASE_ADDR)
-#define MX1_MMA_BASE_ADDR		(0x22000 + MX1_IO_BASE_ADDR)
-#define MX1_AVIC_BASE_ADDR		(0x23000 + MX1_IO_BASE_ADDR)
-#define MX1_CSI_BASE_ADDR		(0x24000 + MX1_IO_BASE_ADDR)
-
-/* macro to get at IO space when running virtually */
-#define MX1_IO_P2V(x)			IMX_IO_P2V(x)
-#define MX1_IO_ADDRESS(x)		IOMEM(MX1_IO_P2V(x))
-
-/* fixed interrput numbers */
-#include <asm/irq.h>
-#define MX1_INT_SOFTINT		(NR_IRQS_LEGACY + 0)
-#define MX1_INT_CSI		(NR_IRQS_LEGACY + 6)
-#define MX1_DSPA_MAC_INT	(NR_IRQS_LEGACY + 7)
-#define MX1_DSPA_INT		(NR_IRQS_LEGACY + 8)
-#define MX1_COMP_INT		(NR_IRQS_LEGACY + 9)
-#define MX1_MSHC_XINT		(NR_IRQS_LEGACY + 10)
-#define MX1_GPIO_INT_PORTA	(NR_IRQS_LEGACY + 11)
-#define MX1_GPIO_INT_PORTB	(NR_IRQS_LEGACY + 12)
-#define MX1_GPIO_INT_PORTC	(NR_IRQS_LEGACY + 13)
-#define MX1_INT_LCDC		(NR_IRQS_LEGACY + 14)
-#define MX1_SIM_INT		(NR_IRQS_LEGACY + 15)
-#define MX1_SIM_DATA_INT	(NR_IRQS_LEGACY + 16)
-#define MX1_RTC_INT		(NR_IRQS_LEGACY + 17)
-#define MX1_RTC_SAMINT		(NR_IRQS_LEGACY + 18)
-#define MX1_INT_UART2PFERR	(NR_IRQS_LEGACY + 19)
-#define MX1_INT_UART2RTS	(NR_IRQS_LEGACY + 20)
-#define MX1_INT_UART2DTR	(NR_IRQS_LEGACY + 21)
-#define MX1_INT_UART2UARTC	(NR_IRQS_LEGACY + 22)
-#define MX1_INT_UART2TX		(NR_IRQS_LEGACY + 23)
-#define MX1_INT_UART2RX		(NR_IRQS_LEGACY + 24)
-#define MX1_INT_UART1PFERR	(NR_IRQS_LEGACY + 25)
-#define MX1_INT_UART1RTS	(NR_IRQS_LEGACY + 26)
-#define MX1_INT_UART1DTR	(NR_IRQS_LEGACY + 27)
-#define MX1_INT_UART1UARTC	(NR_IRQS_LEGACY + 28)
-#define MX1_INT_UART1TX		(NR_IRQS_LEGACY + 29)
-#define MX1_INT_UART1RX		(NR_IRQS_LEGACY + 30)
-#define MX1_VOICE_DAC_INT	(NR_IRQS_LEGACY + 31)
-#define MX1_VOICE_ADC_INT	(NR_IRQS_LEGACY + 32)
-#define MX1_PEN_DATA_INT	(NR_IRQS_LEGACY + 33)
-#define MX1_PWM_INT		(NR_IRQS_LEGACY + 34)
-#define MX1_SDHC_INT		(NR_IRQS_LEGACY + 35)
-#define MX1_INT_I2C		(NR_IRQS_LEGACY + 39)
-#define MX1_INT_CSPI2		(NR_IRQS_LEGACY + 40)
-#define MX1_INT_CSPI1		(NR_IRQS_LEGACY + 41)
-#define MX1_SSI_TX_INT		(NR_IRQS_LEGACY + 42)
-#define MX1_SSI_TX_ERR_INT	(NR_IRQS_LEGACY + 43)
-#define MX1_SSI_RX_INT		(NR_IRQS_LEGACY + 44)
-#define MX1_SSI_RX_ERR_INT	(NR_IRQS_LEGACY + 45)
-#define MX1_TOUCH_INT		(NR_IRQS_LEGACY + 46)
-#define MX1_INT_USBD0		(NR_IRQS_LEGACY + 47)
-#define MX1_INT_USBD1		(NR_IRQS_LEGACY + 48)
-#define MX1_INT_USBD2		(NR_IRQS_LEGACY + 49)
-#define MX1_INT_USBD3		(NR_IRQS_LEGACY + 50)
-#define MX1_INT_USBD4		(NR_IRQS_LEGACY + 51)
-#define MX1_INT_USBD5		(NR_IRQS_LEGACY + 52)
-#define MX1_INT_USBD6		(NR_IRQS_LEGACY + 53)
-#define MX1_BTSYS_INT		(NR_IRQS_LEGACY + 55)
-#define MX1_BTTIM_INT		(NR_IRQS_LEGACY + 56)
-#define MX1_BTWUI_INT		(NR_IRQS_LEGACY + 57)
-#define MX1_TIM2_INT		(NR_IRQS_LEGACY + 58)
-#define MX1_TIM1_INT		(NR_IRQS_LEGACY + 59)
-#define MX1_DMA_ERR		(NR_IRQS_LEGACY + 60)
-#define MX1_DMA_INT		(NR_IRQS_LEGACY + 61)
-#define MX1_GPIO_INT_PORTD	(NR_IRQS_LEGACY + 62)
-#define MX1_WDT_INT		(NR_IRQS_LEGACY + 63)
-
-/* DMA */
-#define MX1_DMA_REQ_UART3_T		2
-#define MX1_DMA_REQ_UART3_R		3
-#define MX1_DMA_REQ_SSI2_T		4
-#define MX1_DMA_REQ_SSI2_R		5
-#define MX1_DMA_REQ_CSI_STAT		6
-#define MX1_DMA_REQ_CSI_R		7
-#define MX1_DMA_REQ_MSHC		8
-#define MX1_DMA_REQ_DSPA_DCT_DOUT	9
-#define MX1_DMA_REQ_DSPA_DCT_DIN	10
-#define MX1_DMA_REQ_DSPA_MAC		11
-#define MX1_DMA_REQ_EXT			12
-#define MX1_DMA_REQ_SDHC		13
-#define MX1_DMA_REQ_SPI1_R		14
-#define MX1_DMA_REQ_SPI1_T		15
-#define MX1_DMA_REQ_SSI_T		16
-#define MX1_DMA_REQ_SSI_R		17
-#define MX1_DMA_REQ_ASP_DAC		18
-#define MX1_DMA_REQ_ASP_ADC		19
-#define MX1_DMA_REQ_USP_EP(x)		(20 + (x))
-#define MX1_DMA_REQ_SPI2_R		26
-#define MX1_DMA_REQ_SPI2_T		27
-#define MX1_DMA_REQ_UART2_T		28
-#define MX1_DMA_REQ_UART2_R		29
-#define MX1_DMA_REQ_UART1_T		30
-#define MX1_DMA_REQ_UART1_R		31
-
-/*
- * This doesn't depend on IMX_NEEDS_DEPRECATED_SYMBOLS
- * to not break drivers/usb/gadget/imx_udc.  Should go
- * away after this driver uses the new name.
- */
-#define USBD_INT0		MX1_INT_USBD0
-
-#endif /* ifndef __MACH_MX1_H__ */
diff --git a/arch/arm/mach-imx/mx31lilly-db.c b/arch/arm/mach-imx/mx31lilly-db.c
index 649fe49..231f900 100644
--- a/arch/arm/mach-imx/mx31lilly-db.c
+++ b/arch/arm/mach-imx/mx31lilly-db.c
@@ -43,18 +43,6 @@
  */
 
 static unsigned int lilly_db_board_pins[] __initdata = {
-	MX31_PIN_CTS1__CTS1,
-	MX31_PIN_RTS1__RTS1,
-	MX31_PIN_TXD1__TXD1,
-	MX31_PIN_RXD1__RXD1,
-	MX31_PIN_CTS2__CTS2,
-	MX31_PIN_RTS2__RTS2,
-	MX31_PIN_TXD2__TXD2,
-	MX31_PIN_RXD2__RXD2,
-	MX31_PIN_CSPI3_MOSI__RXD3,
-	MX31_PIN_CSPI3_MISO__TXD3,
-	MX31_PIN_CSPI3_SCLK__RTS3,
-	MX31_PIN_CSPI3_SPI_RDY__CTS3,
 	MX31_PIN_SD1_DATA3__SD1_DATA3,
 	MX31_PIN_SD1_DATA2__SD1_DATA2,
 	MX31_PIN_SD1_DATA1__SD1_DATA1,
@@ -86,11 +74,6 @@
 	MX31_PIN_CONTRAST__CONTRAST,
 };
 
-/* UART */
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
 /* MMC support */
 
 static int mxc_mmc1_get_ro(struct device *dev)
@@ -203,9 +186,6 @@
 	mxc_iomux_setup_multiple_pins(lilly_db_board_pins,
 					ARRAY_SIZE(lilly_db_board_pins),
 					"development board pins");
-	imx31_add_imx_uart0(&uart_pdata);
-	imx31_add_imx_uart1(&uart_pdata);
-	imx31_add_imx_uart2(&uart_pdata);
 	imx31_add_mxc_mmc(0, &mmc_pdata);
 	mx31lilly_init_fb();
 }
diff --git a/arch/arm/mach-imx/mx31lite-db.c b/arch/arm/mach-imx/mx31lite-db.c
index 5a160b7..c66a006 100644
--- a/arch/arm/mach-imx/mx31lite-db.c
+++ b/arch/arm/mach-imx/mx31lite-db.c
@@ -45,19 +45,6 @@
  */
 
 static unsigned int litekit_db_board_pins[] __initdata = {
-	/* UART1 */
-	MX31_PIN_CTS1__CTS1,
-	MX31_PIN_RTS1__RTS1,
-	MX31_PIN_TXD1__TXD1,
-	MX31_PIN_RXD1__RXD1,
-	/* SPI 0 */
-	MX31_PIN_CSPI1_SCLK__SCLK,
-	MX31_PIN_CSPI1_MOSI__MOSI,
-	MX31_PIN_CSPI1_MISO__MISO,
-	MX31_PIN_CSPI1_SPI_RDY__SPI_RDY,
-	MX31_PIN_CSPI1_SS0__SS0,
-	MX31_PIN_CSPI1_SS1__SS1,
-	MX31_PIN_CSPI1_SS2__SS2,
 	/* SDHC1 */
 	MX31_PIN_SD1_DATA0__SD1_DATA0,
 	MX31_PIN_SD1_DATA1__SD1_DATA1,
@@ -67,11 +54,6 @@
 	MX31_PIN_SD1_CMD__SD1_CMD,
 };
 
-/* UART */
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
 /* MMC */
 
 static int gpio_det, gpio_wp;
@@ -146,19 +128,6 @@
 	.exit	   = mxc_mmc1_exit,
 };
 
-/* SPI */
-
-static int spi_internal_chipselect[] = {
-	MXC_SPI_CS(0),
-	MXC_SPI_CS(1),
-	MXC_SPI_CS(2),
-};
-
-static const struct spi_imx_master spi0_pdata __initconst = {
-	.chipselect	= spi_internal_chipselect,
-	.num_chipselect	= ARRAY_SIZE(spi_internal_chipselect),
-};
-
 /* GPIO LEDs */
 
 static const struct gpio_led litekit_leds[] __initconst = {
@@ -187,9 +156,7 @@
 	mxc_iomux_setup_multiple_pins(litekit_db_board_pins,
 					ARRAY_SIZE(litekit_db_board_pins),
 					"development board pins");
-	imx31_add_imx_uart0(&uart_pdata);
 	imx31_add_mxc_mmc(0, &mmc_pdata);
-	imx31_add_spi_imx0(&spi0_pdata);
 	gpio_led_register_device(-1, &litekit_led_platform_data);
 	imx31_add_imx2_wdt();
 	imx31_add_mxc_rtc();
diff --git a/arch/arm/mach-imx/pm-imx6.c b/arch/arm/mach-imx/pm-imx6.c
index fe708e2..1515e49 100644
--- a/arch/arm/mach-imx/pm-imx6.c
+++ b/arch/arm/mach-imx/pm-imx6.c
@@ -217,7 +217,7 @@
 	u32 mmdc_io_val[MX6_MAX_MMDC_IO_NUM][2]; /* To save offset and value */
 } __aligned(8);
 
-void imx6q_set_int_mem_clk_lpm(bool enable)
+void imx6_set_int_mem_clk_lpm(bool enable)
 {
 	u32 val = readl_relaxed(ccm_base + CGPR);
 
@@ -367,7 +367,7 @@
 	switch (state) {
 	case PM_SUSPEND_STANDBY:
 		imx6_set_lpm(STOP_POWER_ON);
-		imx6q_set_int_mem_clk_lpm(true);
+		imx6_set_int_mem_clk_lpm(true);
 		imx_gpc_pre_suspend(false);
 		if (cpu_is_imx6sl())
 			imx6sl_set_wait_clk(true);
@@ -380,7 +380,7 @@
 		break;
 	case PM_SUSPEND_MEM:
 		imx6_set_lpm(STOP_POWER_OFF);
-		imx6q_set_int_mem_clk_lpm(false);
+		imx6_set_int_mem_clk_lpm(false);
 		imx6q_enable_wb(true);
 		/*
 		 * For suspend into ocram, asm code already take care of
@@ -398,7 +398,7 @@
 		imx_gpc_post_resume();
 		imx6_enable_rbc(false);
 		imx6q_enable_wb(false);
-		imx6q_set_int_mem_clk_lpm(true);
+		imx6_set_int_mem_clk_lpm(true);
 		imx6_set_lpm(WAIT_CLOCKED);
 		break;
 	default:
diff --git a/arch/arm/mach-integrator/Kconfig b/arch/arm/mach-integrator/Kconfig
index 599f973..cefe44f 100644
--- a/arch/arm/mach-integrator/Kconfig
+++ b/arch/arm/mach-integrator/Kconfig
@@ -21,7 +21,6 @@
 config ARCH_INTEGRATOR_AP
 	bool "Support Integrator/AP and Integrator/PP2 platforms"
 	select INTEGRATOR_AP_TIMER
-	select MIGHT_HAVE_PCI
 	select SERIAL_AMBA_PL010 if TTY
 	select SERIAL_AMBA_PL010_CONSOLE if TTY
 	select SOC_BUS
diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index c7bb832..23b98fd 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -17,33 +17,19 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
-#include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/list.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/string.h>
 #include <linux/syscore_ops.h>
 #include <linux/amba/bus.h>
-#include <linux/amba/kmi.h>
 #include <linux/io.h>
 #include <linux/irqchip.h>
-#include <linux/platform_data/clk-integrator.h>
 #include <linux/of_irq.h>
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
-#include <linux/stat.h>
 #include <linux/termios.h>
 
-#include <asm/setup.h>
-#include <asm/param.h>		/* HZ */
-#include <asm/mach-types.h>
-
 #include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
 #include <asm/mach/map.h>
-#include <asm/mach/time.h>
 
 #include "hardware.h"
 #include "cm.h"
@@ -68,14 +54,8 @@
 
 /*
  * Logical      Physical
- * ef000000			Cache flush
- * f1100000	11000000	System controller registers
- * f1300000	13000000	Counter/Timer
  * f1400000	14000000	Interrupt controller
  * f1600000	16000000	UART 0
- * f1700000	17000000	UART 1
- * f1a00000	1a000000	Debug LEDs
- * f1b00000	1b000000	GPIO
  */
 
 static struct map_desc ap_io_desc[] __initdata __maybe_unused = {
@@ -89,16 +69,6 @@
 		.pfn		= __phys_to_pfn(INTEGRATOR_UART0_BASE),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE
-	}, {
-		.virtual	= IO_ADDRESS(INTEGRATOR_DBG_BASE),
-		.pfn		= __phys_to_pfn(INTEGRATOR_DBG_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	= IO_ADDRESS(INTEGRATOR_AP_GPIO_BASE),
-		.pfn		= __phys_to_pfn(INTEGRATOR_AP_GPIO_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
 	}
 };
 
@@ -196,16 +166,10 @@
 
 /* For the Device Tree, add in the UART callbacks as AUXDATA */
 static struct of_dev_auxdata ap_auxdata_lookup[] __initdata = {
-	OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_RTC_BASE,
-		"rtc", NULL),
 	OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_UART0_BASE,
 		"uart0", &ap_uart_data),
 	OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_UART1_BASE,
 		"uart1", &ap_uart_data),
-	OF_DEV_AUXDATA("arm,primecell", KMI0_BASE,
-		"kmi0", NULL),
-	OF_DEV_AUXDATA("arm,primecell", KMI1_BASE,
-		"kmi1", NULL),
 	{ /* sentinel */ },
 };
 
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index 8252983..772a7cf 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -7,67 +7,40 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License.
  */
-#include <linux/types.h>
 #include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/string.h>
-#include <linux/device.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/kmi.h>
-#include <linux/amba/clcd.h>
-#include <linux/platform_data/video-clcd-versatile.h>
 #include <linux/amba/mmci.h>
 #include <linux/io.h>
 #include <linux/irqchip.h>
-#include <linux/gfp.h>
 #include <linux/of_irq.h>
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
 #include <linux/sched_clock.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
 
-#include <asm/setup.h>
-#include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
 #include <asm/mach/map.h>
-#include <asm/mach/time.h>
 
 #include "hardware.h"
 #include "cm.h"
 #include "common.h"
 
+/* Base address to the core module header */
+static struct regmap *cm_map;
 /* Base address to the CP controller */
 static void __iomem *intcp_con_base;
 
-#define INTCP_PA_CLCD_BASE		0xc0000000
+#define CM_COUNTER_OFFSET 0x28
 
 /*
  * Logical      Physical
- * f1000000	10000000	Core module registers
- * f1300000	13000000	Counter/Timer
  * f1400000	14000000	Interrupt controller
  * f1600000	16000000	UART 0
- * f1700000	17000000	UART 1
- * f1a00000	1a000000	Debug LEDs
- * fc900000	c9000000	GPIO
  * fca00000	ca000000	SIC
  */
 
 static struct map_desc intcp_io_desc[] __initdata __maybe_unused = {
 	{
-		.virtual	= IO_ADDRESS(INTEGRATOR_HDR_BASE),
-		.pfn		= __phys_to_pfn(INTEGRATOR_HDR_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	= IO_ADDRESS(INTEGRATOR_CT_BASE),
-		.pfn		= __phys_to_pfn(INTEGRATOR_CT_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	}, {
 		.virtual	= IO_ADDRESS(INTEGRATOR_IC_BASE),
 		.pfn		= __phys_to_pfn(INTEGRATOR_IC_BASE),
 		.length		= SZ_4K,
@@ -78,16 +51,6 @@
 		.length		= SZ_4K,
 		.type		= MT_DEVICE
 	}, {
-		.virtual	= IO_ADDRESS(INTEGRATOR_DBG_BASE),
-		.pfn		= __phys_to_pfn(INTEGRATOR_DBG_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	= IO_ADDRESS(INTEGRATOR_CP_GPIO_BASE),
-		.pfn		= __phys_to_pfn(INTEGRATOR_CP_GPIO_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	}, {
 		.virtual	= IO_ADDRESS(INTEGRATOR_CP_SIC_BASE),
 		.pfn		= __phys_to_pfn(INTEGRATOR_CP_SIC_BASE),
 		.length		= SZ_4K,
@@ -121,66 +84,20 @@
 	.gpio_cd	= -1,
 };
 
-/*
- * CLCD support
- */
-/*
- * Ensure VGA is selected.
- */
-static void cp_clcd_enable(struct clcd_fb *fb)
-{
-	struct fb_var_screeninfo *var = &fb->fb.var;
-	u32 val = CM_CTRL_STATIC1 | CM_CTRL_STATIC2
-			| CM_CTRL_LCDEN0 | CM_CTRL_LCDEN1;
-
-	if (var->bits_per_pixel <= 8 ||
-	    (var->bits_per_pixel == 16 && var->green.length == 5))
-		/* Pseudocolor, RGB555, BGR555 */
-		val |= CM_CTRL_LCDMUXSEL_VGA555_TFT555;
-	else if (fb->fb.var.bits_per_pixel <= 16)
-		/* truecolor RGB565 */
-		val |= CM_CTRL_LCDMUXSEL_VGA565_TFT555;
-	else
-		val = 0; /* no idea for this, don't trust the docs */
-
-	cm_control(CM_CTRL_LCDMUXSEL_MASK|
-		   CM_CTRL_LCDEN0|
-		   CM_CTRL_LCDEN1|
-		   CM_CTRL_STATIC1|
-		   CM_CTRL_STATIC2|
-		   CM_CTRL_STATIC|
-		   CM_CTRL_n24BITEN, val);
-}
-
-static int cp_clcd_setup(struct clcd_fb *fb)
-{
-	fb->panel = versatile_clcd_get_panel("VGA");
-	if (!fb->panel)
-		return -EINVAL;
-
-	return versatile_clcd_setup_dma(fb, SZ_1M);
-}
-
-static struct clcd_board clcd_data = {
-	.name		= "Integrator/CP",
-	.caps		= CLCD_CAP_5551 | CLCD_CAP_RGB565 | CLCD_CAP_888,
-	.check		= clcdfb_check,
-	.decode		= clcdfb_decode,
-	.enable		= cp_clcd_enable,
-	.setup		= cp_clcd_setup,
-	.mmap		= versatile_clcd_mmap_dma,
-	.remove		= versatile_clcd_remove_dma,
-};
-
-#define REFCOUNTER (__io_address(INTEGRATOR_HDR_BASE) + 0x28)
-
 static u64 notrace intcp_read_sched_clock(void)
 {
-	return readl(REFCOUNTER);
+	unsigned int val;
+
+	/* MMIO so discard return code */
+	regmap_read(cm_map, CM_COUNTER_OFFSET, &val);
+	return val;
 }
 
 static void __init intcp_init_early(void)
 {
+	cm_map = syscon_regmap_lookup_by_compatible("arm,core-module-integrator");
+	if (IS_ERR(cm_map))
+		return;
 	sched_clock_register(intcp_read_sched_clock, 32, 24000000);
 }
 
@@ -195,22 +112,8 @@
  * and enforce the bus names since these are used for clock lookups.
  */
 static struct of_dev_auxdata intcp_auxdata_lookup[] __initdata = {
-	OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_RTC_BASE,
-		"rtc", NULL),
-	OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_UART0_BASE,
-		"uart0", NULL),
-	OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_UART1_BASE,
-		"uart1", NULL),
-	OF_DEV_AUXDATA("arm,primecell", KMI0_BASE,
-		"kmi0", NULL),
-	OF_DEV_AUXDATA("arm,primecell", KMI1_BASE,
-		"kmi1", NULL),
 	OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_CP_MMC_BASE,
 		"mmci", &mmc_data),
-	OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_CP_AACI_BASE,
-		"aaci", &mmc_data),
-	OF_DEV_AUXDATA("arm,primecell", INTCP_PA_CLCD_BASE,
-		"clcd", &clcd_data),
 	{ /* sentinel */ },
 };
 
diff --git a/arch/arm/mach-keystone/Kconfig b/arch/arm/mach-keystone/Kconfig
index 8ff61be..24bd64d 100644
--- a/arch/arm/mach-keystone/Kconfig
+++ b/arch/arm/mach-keystone/Kconfig
@@ -8,8 +8,6 @@
 	select COMMON_CLK_KEYSTONE
 	select ARCH_SUPPORTS_BIG_ENDIAN
 	select ZONE_DMA if ARM_LPAE
-	select MIGHT_HAVE_PCI
-	select PCI_DOMAINS if PCI
 	select PINCTRL
 	help
 	  Support for boards based on the Texas Instruments Keystone family of
diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c
index 6af5430..f72e1e9 100644
--- a/arch/arm/mach-mv78xx0/common.c
+++ b/arch/arm/mach-mv78xx0/common.c
@@ -219,7 +219,6 @@
 {
 	orion_ge01_init(eth_data,
 			GE01_PHYS_BASE, IRQ_MV78XX0_GE01_SUM,
-			NO_IRQ,
 			MV643XX_TX_CSUM_DEFAULT_LIMIT);
 }
 
@@ -242,9 +241,7 @@
 		eth_data->duplex = DUPLEX_FULL;
 	}
 
-	orion_ge10_init(eth_data,
-			GE10_PHYS_BASE, IRQ_MV78XX0_GE10_SUM,
-			NO_IRQ);
+	orion_ge10_init(eth_data, GE10_PHYS_BASE, IRQ_MV78XX0_GE10_SUM);
 }
 
 
@@ -266,9 +263,7 @@
 		eth_data->duplex = DUPLEX_FULL;
 	}
 
-	orion_ge11_init(eth_data,
-			GE11_PHYS_BASE, IRQ_MV78XX0_GE11_SUM,
-			NO_IRQ);
+	orion_ge11_init(eth_data, GE11_PHYS_BASE, IRQ_MV78XX0_GE11_SUM);
 }
 
 /*****************************************************************************
diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c
index 0b7fe74..e4f2108 100644
--- a/arch/arm/mach-mxs/mach-mxs.c
+++ b/arch/arm/mach-mxs/mach-mxs.c
@@ -268,80 +268,6 @@
 					   apx4devkit_phy_fixup);
 }
 
-#define ENET0_MDC__GPIO_4_0	MXS_GPIO_NR(4, 0)
-#define ENET0_MDIO__GPIO_4_1	MXS_GPIO_NR(4, 1)
-#define ENET0_RX_EN__GPIO_4_2	MXS_GPIO_NR(4, 2)
-#define ENET0_RXD0__GPIO_4_3	MXS_GPIO_NR(4, 3)
-#define ENET0_RXD1__GPIO_4_4	MXS_GPIO_NR(4, 4)
-#define ENET0_TX_EN__GPIO_4_6	MXS_GPIO_NR(4, 6)
-#define ENET0_TXD0__GPIO_4_7	MXS_GPIO_NR(4, 7)
-#define ENET0_TXD1__GPIO_4_8	MXS_GPIO_NR(4, 8)
-#define ENET_CLK__GPIO_4_16	MXS_GPIO_NR(4, 16)
-
-#define TX28_FEC_PHY_POWER	MXS_GPIO_NR(3, 29)
-#define TX28_FEC_PHY_RESET	MXS_GPIO_NR(4, 13)
-#define TX28_FEC_nINT		MXS_GPIO_NR(4, 5)
-
-static const struct gpio const tx28_gpios[] __initconst = {
-	{ ENET0_MDC__GPIO_4_0, GPIOF_OUT_INIT_LOW, "GPIO_4_0" },
-	{ ENET0_MDIO__GPIO_4_1, GPIOF_OUT_INIT_LOW, "GPIO_4_1" },
-	{ ENET0_RX_EN__GPIO_4_2, GPIOF_OUT_INIT_LOW, "GPIO_4_2" },
-	{ ENET0_RXD0__GPIO_4_3, GPIOF_OUT_INIT_LOW, "GPIO_4_3" },
-	{ ENET0_RXD1__GPIO_4_4, GPIOF_OUT_INIT_LOW, "GPIO_4_4" },
-	{ ENET0_TX_EN__GPIO_4_6, GPIOF_OUT_INIT_LOW, "GPIO_4_6" },
-	{ ENET0_TXD0__GPIO_4_7, GPIOF_OUT_INIT_LOW, "GPIO_4_7" },
-	{ ENET0_TXD1__GPIO_4_8, GPIOF_OUT_INIT_LOW, "GPIO_4_8" },
-	{ ENET_CLK__GPIO_4_16, GPIOF_OUT_INIT_LOW, "GPIO_4_16" },
-	{ TX28_FEC_PHY_POWER, GPIOF_OUT_INIT_LOW, "fec-phy-power" },
-	{ TX28_FEC_PHY_RESET, GPIOF_OUT_INIT_LOW, "fec-phy-reset" },
-	{ TX28_FEC_nINT, GPIOF_DIR_IN, "fec-int" },
-};
-
-static void __init tx28_post_init(void)
-{
-	struct device_node *np;
-	struct platform_device *pdev;
-	struct pinctrl *pctl;
-	int ret;
-
-	enable_clk_enet_out();
-
-	np = of_find_compatible_node(NULL, NULL, "fsl,imx28-fec");
-	pdev = of_find_device_by_node(np);
-	if (!pdev) {
-		pr_err("%s: failed to find fec device\n", __func__);
-		return;
-	}
-
-	pctl = pinctrl_get_select(&pdev->dev, "gpio_mode");
-	if (IS_ERR(pctl)) {
-		pr_err("%s: failed to get pinctrl state\n", __func__);
-		return;
-	}
-
-	ret = gpio_request_array(tx28_gpios, ARRAY_SIZE(tx28_gpios));
-	if (ret) {
-		pr_err("%s: failed to request gpios: %d\n", __func__, ret);
-		return;
-	}
-
-	/* Power up fec phy */
-	gpio_set_value(TX28_FEC_PHY_POWER, 1);
-	msleep(26); /* 25ms according to data sheet */
-
-	/* Mode strap pins */
-	gpio_set_value(ENET0_RX_EN__GPIO_4_2, 1);
-	gpio_set_value(ENET0_RXD0__GPIO_4_3, 1);
-	gpio_set_value(ENET0_RXD1__GPIO_4_4, 1);
-
-	udelay(100); /* minimum assertion time for nRST */
-
-	/* Deasserting FEC PHY RESET */
-	gpio_set_value(TX28_FEC_PHY_RESET, 1);
-
-	pinctrl_put(pctl);
-}
-
 static void __init crystalfontz_init(void)
 {
 	update_fec_mac_prop(OUI_CRYSTALFONTZ);
@@ -501,9 +427,6 @@
 	of_platform_default_populate(NULL, NULL, parent);
 
 	mxs_restart_init();
-
-	if (of_machine_is_compatible("karo,tx28"))
-		tx28_post_init();
 }
 
 #define MXS_CLKCTRL_RESET_CHIP		(1 << 1)
diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig
index b7e9801..3ae45b8 100644
--- a/arch/arm/mach-nomadik/Kconfig
+++ b/arch/arm/mach-nomadik/Kconfig
@@ -7,6 +7,7 @@
 	select CLKSRC_NOMADIK_MTU_SCHED_CLOCK
 	select CPU_ARM926T
 	select GPIOLIB
+	select MFD_SYSCON
 	select MIGHT_HAVE_CACHE_L2X0
 	select PINCTRL
 	select PINCTRL_NOMADIK
diff --git a/arch/arm/mach-omap1/board-h2-mmc.c b/arch/arm/mach-omap1/board-h2-mmc.c
index 7119ef2..357be2d 100644
--- a/arch/arm/mach-omap1/board-h2-mmc.c
+++ b/arch/arm/mach-omap1/board-h2-mmc.c
@@ -19,7 +19,7 @@
 #include "board-h2.h"
 #include "mmc.h"
 
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+#if IS_ENABLED(CONFIG_MMC_OMAP)
 
 static int mmc_set_power(struct device *dev, int slot, int power_on,
 				int vdd)
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index cd146ed..675254e 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -349,7 +349,7 @@
 #if IS_ENABLED(CONFIG_USB_OMAP)
 	.hmc_mode	= 19,	/* 0:host(off) 1:dev|otg 2:disabled */
 	/* .hmc_mode	= 21,*/	/* 0:host(off) 1:dev(loopback) 2:host(loopback) */
-#elif	defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+#elif	IS_ENABLED(CONFIG_USB_OHCI_HCD)
 	/* needs OTG cable, or NONSTANDARD (B-to-MiniB) */
 	.hmc_mode	= 20,	/* 1:dev|otg(off) 1:host 2:disabled */
 #endif
diff --git a/arch/arm/mach-omap1/board-h3-mmc.c b/arch/arm/mach-omap1/board-h3-mmc.c
index 43aab63..4f58bfa 100644
--- a/arch/arm/mach-omap1/board-h3-mmc.c
+++ b/arch/arm/mach-omap1/board-h3-mmc.c
@@ -20,7 +20,7 @@
 #include "board-h3.h"
 #include "mmc.h"
 
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+#if IS_ENABLED(CONFIG_MMC_OMAP)
 
 static int mmc_set_power(struct device *dev, int slot, int power_on,
 				int vdd)
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index f7c8c63..e62f9d4 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -368,7 +368,7 @@
 
 #if IS_ENABLED(CONFIG_USB_OMAP)
 	.hmc_mode       = 19,   /* 0:host(off) 1:dev|otg 2:disabled */
-#elif  defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+#elif IS_ENABLED(CONFIG_USB_OHCI_HCD)
 	/* NONSTANDARD CABLE NEEDED (B-to-Mini-B) */
 	.hmc_mode       = 20,   /* 1:dev|otg(off) 1:host 2:disabled */
 #endif
diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c
index 9525ef9..e424df9 100644
--- a/arch/arm/mach-omap1/board-htcherald.c
+++ b/arch/arm/mach-omap1/board-htcherald.c
@@ -401,7 +401,7 @@
 };
 
 /* MMC Card */
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+#if IS_ENABLED(CONFIG_MMC_OMAP)
 static struct omap_mmc_platform_data htc_mmc1_data = {
 	.nr_slots                       = 1,
 	.switch_slot                    = NULL,
@@ -586,7 +586,7 @@
 
 	omap_register_i2c_bus(1, 100, NULL, 0);
 
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+#if IS_ENABLED(CONFIG_MMC_OMAP)
 	htc_mmc_data[0] = &htc_mmc1_data;
 	omap1_init_mmc(htc_mmc_data, 1);
 #endif
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index ae90bd0..67e1882 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -315,7 +315,7 @@
 #if IS_ENABLED(CONFIG_USB_OMAP)
 	.hmc_mode	= 19,	/* 0:host(off) 1:dev|otg 2:disabled */
 	/* .hmc_mode	= 21,*/	/* 0:host(off) 1:dev(loopback) 2:host(loopback) */
-#elif	defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+#elif	IS_ENABLED(CONFIG_USB_OHCI_HCD)
 	/* NONSTANDARD CABLE NEEDED (B-to-Mini-B) */
 	.hmc_mode	= 20,	/* 1:dev|otg(off) 1:host 2:disabled */
 #endif
@@ -328,7 +328,7 @@
 };
 #endif
 
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+#if IS_ENABLED(CONFIG_MMC_OMAP)
 
 static int mmc_set_power(struct device *dev, int slot, int power_on,
 				int vdd)
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index dd3a3ad..ee8d9f5 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -159,7 +159,7 @@
 	.extcon		= "tahvo-usb",
 };
 
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+#if IS_ENABLED(CONFIG_MMC_OMAP)
 
 #define NOKIA770_GPIO_MMC_POWER		41
 #define NOKIA770_GPIO_MMC_SWITCH	23
@@ -216,7 +216,7 @@
 }
 #endif
 
-#if defined(CONFIG_I2C_CBUS_GPIO) || defined(CONFIG_I2C_CBUS_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_I2C_CBUS_GPIO)
 static struct i2c_cbus_platform_data nokia770_cbus_data = {
 	.clk_gpio = OMAP_MPUIO(9),
 	.dat_gpio = OMAP_MPUIO(10),
diff --git a/arch/arm/mach-omap1/board-sx1-mmc.c b/arch/arm/mach-omap1/board-sx1-mmc.c
index a937357..79f0af8 100644
--- a/arch/arm/mach-omap1/board-sx1-mmc.c
+++ b/arch/arm/mach-omap1/board-sx1-mmc.c
@@ -20,7 +20,7 @@
 
 #include "mmc.h"
 
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+#if IS_ENABLED(CONFIG_MMC_OMAP)
 
 static int mmc_set_power(struct device *dev, int slot, int power_on,
 				int vdd)
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index 8c8be86..baaf902 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -33,7 +33,7 @@
 #include "mmc.h"
 #include "sram.h"
 
-#if defined(CONFIG_RTC_DRV_OMAP) || defined(CONFIG_RTC_DRV_OMAP_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_OMAP)
 
 #define	OMAP_RTC_BASE		0xfffb4800
 
@@ -72,7 +72,7 @@
 
 /*-------------------------------------------------------------------------*/
 
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+#if IS_ENABLED(CONFIG_MMC_OMAP)
 
 static inline void omap1_mmc_mux(struct omap_mmc_platform_data *mmc_controller,
 			int controller_nr)
@@ -230,7 +230,7 @@
 /*-------------------------------------------------------------------------*/
 
 /* OMAP7xx SPI support */
-#if defined(CONFIG_SPI_OMAP_100K) || defined(CONFIG_SPI_OMAP_100K_MODULE)
+#if IS_ENABLED(CONFIG_SPI_OMAP_100K)
 
 struct platform_device omap_spi1 = {
 	.name           = "omap1_spi100k",
@@ -312,7 +312,7 @@
  * mcbsp1..3	= 5..7
  */
 
-#if defined(CONFIG_SPI_OMAP_UWIRE) || defined(CONFIG_SPI_OMAP_UWIRE_MODULE)
+#if IS_ENABLED(CONFIG_SPI_OMAP_UWIRE)
 
 #define	OMAP_UWIRE_BASE		0xfffb3000
 
@@ -418,7 +418,7 @@
 }
 arch_initcall(omap1_init_devices);
 
-#if defined(CONFIG_OMAP_WATCHDOG) || defined(CONFIG_OMAP_WATCHDOG_MODULE)
+#if IS_ENABLED(CONFIG_OMAP_WATCHDOG)
 
 static struct resource wdt_resources[] = {
 	{
diff --git a/arch/arm/mach-omap1/fb.c b/arch/arm/mach-omap1/fb.c
index c770d45..ddab040 100644
--- a/arch/arm/mach-omap1/fb.c
+++ b/arch/arm/mach-omap1/fb.c
@@ -33,7 +33,7 @@
 
 #include <asm/mach/map.h>
 
-#if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE)
+#if IS_ENABLED(CONFIG_FB_OMAP)
 
 static bool omapfb_lcd_configured;
 static struct omapfb_platform_data omapfb_config;
diff --git a/arch/arm/mach-omap1/include/mach/usb.h b/arch/arm/mach-omap1/include/mach/usb.h
index 2c26305..a7c5559 100644
--- a/arch/arm/mach-omap1/include/mach/usb.h
+++ b/arch/arm/mach-omap1/include/mach/usb.h
@@ -12,7 +12,7 @@
 
 void omap_otg_init(struct omap_usb_config *config);
 
-#if defined(CONFIG_USB) || defined(CONFIG_USB_MODULE)
+#if IS_ENABLED(CONFIG_USB)
 void omap1_usb_init(struct omap_usb_config *pdata);
 #else
 static inline void omap1_usb_init(struct omap_usb_config *pdata)
diff --git a/arch/arm/mach-omap1/mmc.h b/arch/arm/mach-omap1/mmc.h
index 39c2b13..d7b4688 100644
--- a/arch/arm/mach-omap1/mmc.h
+++ b/arch/arm/mach-omap1/mmc.h
@@ -7,7 +7,7 @@
 #define OMAP1_MMC1_BASE		0xfffb7800
 #define OMAP1_MMC2_BASE		0xfffb7c00	/* omap16xx only */
 
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+#if IS_ENABLED(CONFIG_MMC_OMAP)
 void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
 				int nr_controllers);
 #else
diff --git a/arch/arm/mach-omap1/usb.c b/arch/arm/mach-omap1/usb.c
index 4118db5..2506e59 100644
--- a/arch/arm/mach-omap1/usb.c
+++ b/arch/arm/mach-omap1/usb.c
@@ -136,7 +136,7 @@
 	}
 #endif
 
-#if	defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+#if	IS_ENABLED(CONFIG_USB_OHCI_HCD)
 	if (config->otg || config->register_host) {
 		struct platform_device *ohci_device = config->ohci_device;
 		int status;
@@ -221,7 +221,7 @@
 
 #endif
 
-#if	defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+#if	IS_ENABLED(CONFIG_USB_OHCI_HCD)
 
 /* The dmamask must be set for OHCI to work */
 static u64 ohci_dmamask = ~(u32)0;
@@ -612,7 +612,7 @@
 	}
 #endif
 
-#if	defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+#if	IS_ENABLED(CONFIG_USB_OHCI_HCD)
 	if (config->register_host) {
 		int status;
 
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 5a0b380..a9afeeb 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -192,12 +192,6 @@
 	depends on ARCH_OMAP2 && SOC_OMAP2420
 	default y if MACH_NOKIA_N8X0
 
-config MACH_OMAP_LDP
-	bool "OMAP3 LDP board"
-	depends on ARCH_OMAP3
-	default y
-	select OMAP_PACKAGE_CBB
-
 config MACH_OMAP3517EVM
 	bool "OMAP3517/ AM3517 EVM board"
 	depends on ARCH_OMAP3
@@ -222,12 +216,6 @@
 	select MACH_NOKIA_N810
 	select MACH_NOKIA_N810_WIMAX
 
-config MACH_NOKIA_RX51
-	bool "Nokia N900 (RX-51) phone"
-	depends on ARCH_OMAP3
-	default y
-	select OMAP_PACKAGE_CBB
-
 config OMAP3_SDRC_AC_TIMING
 	bool "Enable SDRC AC timing register changes"
 	depends on ARCH_OMAP3
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index a7f2d05..5b37ec2 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -231,11 +231,7 @@
 
 # Specific board support
 obj-$(CONFIG_MACH_OMAP_GENERIC)		+= board-generic.o pdata-quirks.o
-obj-$(CONFIG_MACH_OMAP_LDP)		+= board-ldp.o
 obj-$(CONFIG_MACH_NOKIA_N8X0)		+= board-n8x0.o
-obj-$(CONFIG_MACH_NOKIA_RX51)		+= board-rx51.o sdram-nokia.o
-obj-$(CONFIG_MACH_NOKIA_RX51)		+= board-rx51-peripherals.o
-obj-$(CONFIG_MACH_NOKIA_RX51)		+= board-rx51-video.o
 
 # Platform specific device init code
 
diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c
index 70b21cc..2188dc3 100644
--- a/arch/arm/mach-omap2/board-flash.c
+++ b/arch/arm/mach-omap2/board-flash.c
@@ -81,8 +81,7 @@
 		pr_err("Unable to register NOR device\n");
 }
 
-#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
-		defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
+#if IS_ENABLED(CONFIG_MTD_ONENAND_OMAP2)
 static struct omap_onenand_platform_data board_onenand_data = {
 	.dma_channel	= -1,   /* disable DMA in OMAP OneNAND driver */
 };
@@ -97,10 +96,9 @@
 
 	gpmc_onenand_init(&board_onenand_data);
 }
-#endif /* CONFIG_MTD_ONENAND_OMAP2 || CONFIG_MTD_ONENAND_OMAP2_MODULE */
+#endif /* IS_ENABLED(CONFIG_MTD_ONENAND_OMAP2) */
 
-#if defined(CONFIG_MTD_NAND_OMAP2) || \
-		defined(CONFIG_MTD_NAND_OMAP2_MODULE)
+#if IS_ENABLED(CONFIG_MTD_NAND_OMAP2)
 
 /* Note that all values in this struct are in nanoseconds */
 struct gpmc_timings nand_default_timings[1] = {
@@ -144,7 +142,7 @@
 	board_nand_data.ecc_opt = OMAP_ECC_HAM1_CODE_SW;
 	gpmc_nand_init(&board_nand_data, gpmc_t);
 }
-#endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */
+#endif /* IS_ENABLED(CONFIG_MTD_NAND_OMAP2) */
 
 /**
  * get_gpmc0_type - Reads the FPGA DIP_SWITCH_INPUT_REGISTER2 to get
diff --git a/arch/arm/mach-omap2/board-flash.h b/arch/arm/mach-omap2/board-flash.h
index ea9aaeb..8b39eec 100644
--- a/arch/arm/mach-omap2/board-flash.h
+++ b/arch/arm/mach-omap2/board-flash.h
@@ -23,10 +23,7 @@
 	int nr_parts;
 };
 
-#if defined(CONFIG_MTD_NAND_OMAP2) || \
-		defined(CONFIG_MTD_NAND_OMAP2_MODULE) || \
-		defined(CONFIG_MTD_ONENAND_OMAP2) || \
-		defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
+#if IS_ENABLED(CONFIG_MTD_NAND_OMAP2) || IS_ENABLED(CONFIG_MTD_ONENAND_OMAP2)
 extern void board_flash_init(struct flash_partitions [],
 				char chip_sel[][GPMC_CS_NUM], int nand_type);
 #else
@@ -36,8 +33,7 @@
 }
 #endif
 
-#if defined(CONFIG_MTD_NAND_OMAP2) || \
-		defined(CONFIG_MTD_NAND_OMAP2_MODULE)
+#if IS_ENABLED(CONFIG_MTD_NAND_OMAP2)
 extern void board_nand_init(struct mtd_partition *nand_parts,
 		u8 nr_parts, u8 cs, int nand_type, struct gpmc_timings *gpmc_t);
 extern struct gpmc_timings nand_default_timings[];
@@ -49,8 +45,7 @@
 #define	nand_default_timings	NULL
 #endif
 
-#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
-		defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
+#if IS_ENABLED(CONFIG_MTD_ONENAND_OMAP2)
 extern void board_onenand_init(struct mtd_partition *nand_parts,
 					u8 nr_parts, u8 cs);
 #else
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
deleted file mode 100644
index 390795b..0000000
--- a/arch/arm/mach-omap2/board-ldp.c
+++ /dev/null
@@ -1,430 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/board-ldp.c
- *
- * Copyright (C) 2008 Texas Instruments Inc.
- * Nishant Kamat <nskamat@ti.com>
- *
- * Modified from mach-omap2/board-3430sdp.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/input.h>
-#include <linux/input/matrix_keypad.h>
-#include <linux/gpio_keys.h>
-#include <linux/workqueue.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/spi/spi.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/i2c/twl.h>
-#include <linux/io.h>
-#include <linux/smsc911x.h>
-#include <linux/mmc/host.h>
-#include <linux/usb/phy.h>
-#include <linux/platform_data/spi-omap2-mcspi.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include "gpmc.h"
-#include "gpmc-smsc911x.h"
-
-#include <linux/platform_data/omapdss.h>
-#include <video/omap-panel-data.h>
-
-#include "board-flash.h"
-#include "mux.h"
-#include "hsmmc.h"
-#include "control.h"
-#include "common-board-devices.h"
-#include "display.h"
-
-#define LDP_SMSC911X_CS		1
-#define LDP_SMSC911X_GPIO	152
-#define DEBUG_BASE		0x08000000
-#define LDP_ETHR_START		DEBUG_BASE
-
-static uint32_t board_keymap[] = {
-	KEY(0, 0, KEY_1),
-	KEY(1, 0, KEY_2),
-	KEY(2, 0, KEY_3),
-	KEY(0, 1, KEY_4),
-	KEY(1, 1, KEY_5),
-	KEY(2, 1, KEY_6),
-	KEY(3, 1, KEY_F5),
-	KEY(0, 2, KEY_7),
-	KEY(1, 2, KEY_8),
-	KEY(2, 2, KEY_9),
-	KEY(3, 2, KEY_F6),
-	KEY(0, 3, KEY_F7),
-	KEY(1, 3, KEY_0),
-	KEY(2, 3, KEY_F8),
-	PERSISTENT_KEY(4, 5),
-	KEY(4, 4, KEY_VOLUMEUP),
-	KEY(5, 5, KEY_VOLUMEDOWN),
-	0
-};
-
-static struct matrix_keymap_data board_map_data = {
-	.keymap			= board_keymap,
-	.keymap_size		= ARRAY_SIZE(board_keymap),
-};
-
-static struct twl4030_keypad_data ldp_kp_twl4030_data = {
-	.keymap_data	= &board_map_data,
-	.rows		= 6,
-	.cols		= 6,
-	.rep		= 1,
-};
-
-static struct gpio_keys_button ldp_gpio_keys_buttons[] = {
-	[0] = {
-		.code			= KEY_ENTER,
-		.gpio			= 101,
-		.desc			= "enter sw",
-		.active_low		= 1,
-		.debounce_interval	= 30,
-	},
-	[1] = {
-		.code			= KEY_F1,
-		.gpio			= 102,
-		.desc			= "func 1",
-		.active_low		= 1,
-		.debounce_interval	= 30,
-	},
-	[2] = {
-		.code			= KEY_F2,
-		.gpio			= 103,
-		.desc			= "func 2",
-		.active_low		= 1,
-		.debounce_interval	= 30,
-	},
-	[3] = {
-		.code			= KEY_F3,
-		.gpio			= 104,
-		.desc			= "func 3",
-		.active_low		= 1,
-		.debounce_interval 	= 30,
-	},
-	[4] = {
-		.code			= KEY_F4,
-		.gpio			= 105,
-		.desc			= "func 4",
-		.active_low		= 1,
-		.debounce_interval	= 30,
-	},
-	[5] = {
-		.code			= KEY_LEFT,
-		.gpio			= 106,
-		.desc			= "left sw",
-		.active_low		= 1,
-		.debounce_interval	= 30,
-	},
-	[6] = {
-		.code			= KEY_RIGHT,
-		.gpio			= 107,
-		.desc			= "right sw",
-		.active_low		= 1,
-		.debounce_interval	= 30,
-	},
-	[7] = {
-		.code			= KEY_UP,
-		.gpio			= 108,
-		.desc			= "up sw",
-		.active_low		= 1,
-		.debounce_interval	= 30,
-	},
-	[8] = {
-		.code			= KEY_DOWN,
-		.gpio			= 109,
-		.desc			= "down sw",
-		.active_low		= 1,
-		.debounce_interval	= 30,
-	},
-};
-
-static struct gpio_keys_platform_data ldp_gpio_keys = {
-	.buttons		= ldp_gpio_keys_buttons,
-	.nbuttons		= ARRAY_SIZE(ldp_gpio_keys_buttons),
-	.rep			= 1,
-};
-
-static struct platform_device ldp_gpio_keys_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &ldp_gpio_keys,
-	},
-};
-
-static struct omap_smsc911x_platform_data smsc911x_cfg = {
-	.cs             = LDP_SMSC911X_CS,
-	.gpio_irq       = LDP_SMSC911X_GPIO,
-	.gpio_reset     = -EINVAL,
-	.flags		= SMSC911X_USE_32BIT,
-};
-
-static inline void __init ldp_init_smsc911x(void)
-{
-	gpmc_smsc911x_init(&smsc911x_cfg);
-}
-
-/* LCD */
-
-#define LCD_PANEL_RESET_GPIO		55
-#define LCD_PANEL_QVGA_GPIO		56
-
-static const struct display_timing ldp_lcd_videomode = {
-	.pixelclock	= { 0, 5400000, 0 },
-
-	.hactive = { 0, 240, 0 },
-	.hfront_porch = { 0, 3, 0 },
-	.hback_porch = { 0, 39, 0 },
-	.hsync_len = { 0, 3, 0 },
-
-	.vactive = { 0, 320, 0 },
-	.vfront_porch = { 0, 2, 0 },
-	.vback_porch = { 0, 7, 0 },
-	.vsync_len = { 0, 1, 0 },
-
-	.flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW |
-		DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE,
-};
-
-static struct panel_dpi_platform_data ldp_lcd_pdata = {
-	.name                   = "lcd",
-	.source                 = "dpi.0",
-
-	.data_lines		= 18,
-
-	.display_timing		= &ldp_lcd_videomode,
-
-	.enable_gpio		= -1,	/* filled in code */
-	.backlight_gpio		= -1,	/* filled in code */
-};
-
-static struct platform_device ldp_lcd_device = {
-	.name                   = "panel-dpi",
-	.id                     = 0,
-	.dev.platform_data      = &ldp_lcd_pdata,
-};
-
-static struct omap_dss_board_info ldp_dss_data = {
-	.default_display_name = "lcd",
-};
-
-static void __init ldp_display_init(void)
-{
-	int r;
-
-	static struct gpio gpios[] __initdata = {
-		{LCD_PANEL_RESET_GPIO, GPIOF_OUT_INIT_HIGH, "LCD RESET"},
-		{LCD_PANEL_QVGA_GPIO, GPIOF_OUT_INIT_HIGH, "LCD QVGA"},
-	};
-
-	r = gpio_request_array(gpios, ARRAY_SIZE(gpios));
-	if (r) {
-		pr_err("Cannot request LCD GPIOs, error %d\n", r);
-		return;
-	}
-
-	omap_display_init(&ldp_dss_data);
-}
-
-static int ldp_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio)
-{
-	int res;
-
-	/* LCD enable GPIO */
-	ldp_lcd_pdata.enable_gpio = gpio + 7;
-
-	/* Backlight enable GPIO */
-	ldp_lcd_pdata.backlight_gpio = gpio + 15;
-
-	res = platform_device_register(&ldp_lcd_device);
-	if (res)
-		pr_err("Unable to register LCD: %d\n", res);
-
-	return 0;
-}
-
-static struct twl4030_gpio_platform_data ldp_gpio_data = {
-	.setup		= ldp_twl_gpio_setup,
-};
-
-static struct regulator_consumer_supply ldp_vmmc1_supply[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
-};
-
-/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
-static struct regulator_init_data ldp_vmmc1 = {
-	.constraints = {
-		.min_uV			= 1850000,
-		.max_uV			= 3150000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(ldp_vmmc1_supply),
-	.consumer_supplies	= ldp_vmmc1_supply,
-};
-
-/* ads7846 on SPI */
-static struct regulator_consumer_supply ldp_vaux1_supplies[] = {
-	REGULATOR_SUPPLY("vcc", "spi1.0"),
-};
-
-/* VAUX1 */
-static struct regulator_init_data ldp_vaux1 = {
-	.constraints = {
-		.min_uV			= 3000000,
-		.max_uV			= 3000000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies		= ARRAY_SIZE(ldp_vaux1_supplies),
-	.consumer_supplies		= ldp_vaux1_supplies,
-};
-
-static struct regulator_consumer_supply ldp_vpll2_supplies[] = {
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dpi.0"),
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"),
-};
-
-static struct regulator_init_data ldp_vpll2 = {
-	.constraints = {
-		.name			= "VDVI",
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(ldp_vpll2_supplies),
-	.consumer_supplies	= ldp_vpll2_supplies,
-};
-
-static struct twl4030_platform_data ldp_twldata = {
-	/* platform_data for children goes here */
-	.vmmc1		= &ldp_vmmc1,
-	.vaux1		= &ldp_vaux1,
-	.vpll2		= &ldp_vpll2,
-	.gpio		= &ldp_gpio_data,
-	.keypad		= &ldp_kp_twl4030_data,
-};
-
-static int __init omap_i2c_init(void)
-{
-	omap3_pmic_get_config(&ldp_twldata,
-			  TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC, 0);
-	omap3_pmic_init("twl4030", &ldp_twldata);
-	omap_register_i2c_bus(2, 400, NULL, 0);
-	omap_register_i2c_bus(3, 400, NULL, 0);
-	return 0;
-}
-
-static struct omap2_hsmmc_info mmc[] __initdata = {
-	{
-		.mmc		= 1,
-		.caps		= MMC_CAP_4_BIT_DATA,
-		.gpio_cd	= -EINVAL,
-		.gpio_wp	= -EINVAL,
-	},
-	{}	/* Terminator */
-};
-
-static struct platform_device *ldp_devices[] __initdata = {
-	&ldp_gpio_keys_device,
-};
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#endif
-
-static struct mtd_partition ldp_nand_partitions[] = {
-	/* All the partition sizes are listed in terms of NAND block size */
-	{
-		.name		= "X-Loader-NAND",
-		.offset		= 0,
-		.size		= 4 * (64 * 2048),	/* 512KB, 0x80000 */
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	{
-		.name		= "U-Boot-NAND",
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x80000 */
-		.size		= 10 * (64 * 2048),	/* 1.25MB, 0x140000 */
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	{
-		.name		= "Boot Env-NAND",
-		.offset		= MTDPART_OFS_APPEND,   /* Offset = 0x1c0000 */
-		.size		= 2 * (64 * 2048),	/* 256KB, 0x40000 */
-	},
-	{
-		.name		= "Kernel-NAND",
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x0200000*/
-		.size		= 240 * (64 * 2048),	/* 30M, 0x1E00000 */
-	},
-	{
-		.name		= "File System - NAND",
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x2000000 */
-		.size		= MTDPART_SIZ_FULL,	/* 96MB, 0x6000000 */
-	},
-
-};
-
-static struct regulator_consumer_supply dummy_supplies[] = {
-	REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
-	REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
-};
-
-static void __init omap_ldp_init(void)
-{
-	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
-	ldp_init_smsc911x();
-	omap_i2c_init();
-	platform_add_devices(ldp_devices, ARRAY_SIZE(ldp_devices));
-	omap_ads7846_init(1, 54, 310, NULL);
-	omap_serial_init();
-	omap_sdrc_init(NULL, NULL);
-	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
-	usb_musb_init(NULL);
-	board_nand_init(ldp_nand_partitions, ARRAY_SIZE(ldp_nand_partitions),
-			0, 0, nand_default_timings);
-
-	omap_hsmmc_init(mmc);
-	ldp_display_init();
-}
-
-MACHINE_START(OMAP_LDP, "OMAP LDP board")
-	.atag_offset	= 0x100,
-	.reserve	= omap_reserve,
-	.map_io		= omap3_map_io,
-	.init_early	= omap3430_init_early,
-	.init_irq	= omap3_init_irq,
-	.init_machine	= omap_ldp_init,
-	.init_late	= omap3430_init_late,
-	.init_time	= omap_init_time,
-	.restart	= omap3xxx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index b6443a4..6b6fda6 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -66,7 +66,7 @@
 		pr_err("Unknown board\n");
 }
 
-#if defined(CONFIG_USB_MUSB_TUSB6010) || defined(CONFIG_USB_MUSB_TUSB6010_MODULE)
+#if IS_ENABLED(CONFIG_USB_MUSB_TUSB6010)
 /*
  * Enable or disable power to TUSB6010. When enabling, turn on 3.3 V and
  * 1.5 V voltage regulators of PM companion chip. Companion chip will then
@@ -163,8 +163,7 @@
 	},
 };
 
-#if defined(CONFIG_MENELAUS) &&						\
-	(defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE))
+#if defined(CONFIG_MENELAUS) && IS_ENABLED(CONFIG_MMC_OMAP)
 
 /*
  * On both N800 and N810, only the first of the two MMC controllers is in use.
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
deleted file mode 100644
index 6d3af43..0000000
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ /dev/null
@@ -1,1313 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/board-rx51-peripherals.c
- *
- * Copyright (C) 2008-2009 Nokia
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/input.h>
-#include <linux/input/matrix_keypad.h>
-#include <linux/spi/spi.h>
-#include <linux/wl12xx.h>
-#include <linux/spi/tsc2005.h>
-#include <linux/i2c.h>
-#include <linux/i2c/twl.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/regulator/machine.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/gpio/machine.h>
-#include <linux/omap-gpmc.h>
-#include <linux/mmc/host.h>
-#include <linux/power/isp1704_charger.h>
-#include <linux/platform_data/spi-omap2-mcspi.h>
-#include <linux/platform_data/mtd-onenand-omap2.h>
-#include <linux/module.h>
-
-#include <plat/dmtimer.h>
-
-#include <asm/system_info.h>
-
-#include "common.h"
-#include <linux/omap-dma.h>
-
-#include "board-rx51.h"
-
-#include <sound/tlv320aic3x.h>
-#include <sound/tpa6130a2-plat.h>
-#include <linux/platform_data/media/si4713.h>
-#include <linux/platform_data/leds-lp55xx.h>
-
-#include <linux/platform_data/tsl2563.h>
-#include <linux/lis3lv02d.h>
-
-#include <video/omap-panel-data.h>
-
-#include <linux/platform_data/pwm_omap_dmtimer.h>
-#include <linux/platform_data/media/ir-rx51.h>
-
-#include "mux.h"
-#include "omap-pm.h"
-#include "hsmmc.h"
-#include "common-board-devices.h"
-#include "soc.h"
-#include "omap-secure.h"
-
-#define SYSTEM_REV_B_USES_VAUX3	0x1699
-#define SYSTEM_REV_S_USES_VAUX3 0x8
-
-#define RX51_WL1251_POWER_GPIO		87
-#define RX51_WL1251_IRQ_GPIO		42
-#define RX51_FMTX_RESET_GPIO		163
-#define RX51_FMTX_IRQ			53
-#define RX51_LP5523_CHIP_EN_GPIO	41
-
-#define RX51_USB_TRANSCEIVER_RST_GPIO	67
-
-#define RX51_TSC2005_RESET_GPIO         104
-#define RX51_TSC2005_IRQ_GPIO           100
-
-#define LIS302_IRQ1_GPIO 181
-#define LIS302_IRQ2_GPIO 180  /* Not yet in use */
-
-/* List all SPI devices here. Note that the list/probe order seems to matter! */
-enum {
-	RX51_SPI_WL1251,
-	RX51_SPI_TSC2005,	/* Touch Controller */
-	RX51_SPI_MIPID,		/* LCD panel */
-};
-
-static struct wl1251_platform_data wl1251_pdata;
-static struct tsc2005_platform_data tsc2005_pdata;
-
-#if defined(CONFIG_SENSORS_LIS3_I2C) || defined(CONFIG_SENSORS_LIS3_I2C_MODULE)
-static int lis302_setup(void)
-{
-	int err;
-	int irq1 = LIS302_IRQ1_GPIO;
-	int irq2 = LIS302_IRQ2_GPIO;
-
-	/* gpio for interrupt pin 1 */
-	err = gpio_request(irq1, "lis3lv02dl_irq1");
-	if (err) {
-		printk(KERN_ERR "lis3lv02dl: gpio request failed\n");
-		goto out;
-	}
-
-	/* gpio for interrupt pin 2 */
-	err = gpio_request(irq2, "lis3lv02dl_irq2");
-	if (err) {
-		gpio_free(irq1);
-		printk(KERN_ERR "lis3lv02dl: gpio request failed\n");
-		goto out;
-	}
-
-	gpio_direction_input(irq1);
-	gpio_direction_input(irq2);
-
-out:
-	return err;
-}
-
-static int lis302_release(void)
-{
-	gpio_free(LIS302_IRQ1_GPIO);
-	gpio_free(LIS302_IRQ2_GPIO);
-
-	return 0;
-}
-
-static struct lis3lv02d_platform_data rx51_lis3lv02d_data = {
-	.click_flags    = LIS3_CLICK_SINGLE_X | LIS3_CLICK_SINGLE_Y |
-			  LIS3_CLICK_SINGLE_Z,
-	/* Limits are 0.5g * value */
-	.click_thresh_x = 8,
-	.click_thresh_y = 8,
-	.click_thresh_z = 10,
-	/* Click must be longer than time limit */
-	.click_time_limit = 9,
-	/* Kind of debounce filter */
-	.click_latency    = 50,
-
-	/* Limits for all axis. millig-value / 18 to get HW values */
-	.wakeup_flags = LIS3_WAKEUP_X_HI | LIS3_WAKEUP_Y_HI,
-	.wakeup_thresh = 800 / 18,
-	.wakeup_flags2 = LIS3_WAKEUP_Z_HI ,
-	.wakeup_thresh2 = 900 / 18,
-
-	.hipass_ctrl = LIS3_HIPASS1_DISABLE | LIS3_HIPASS2_DISABLE,
-
-	/* Interrupt line 2 for click detection, line 1 for thresholds */
-	.irq_cfg = LIS3_IRQ2_CLICK | LIS3_IRQ1_FF_WU_12,
-
-	.axis_x = LIS3_DEV_X,
-	.axis_y = LIS3_INV_DEV_Y,
-	.axis_z = LIS3_INV_DEV_Z,
-	.setup_resources = lis302_setup,
-	.release_resources = lis302_release,
-	.st_min_limits = {-32, 3, 3},
-	.st_max_limits = {-3, 32, 32},
-};
-#endif
-
-#if defined(CONFIG_SENSORS_TSL2563) || defined(CONFIG_SENSORS_TSL2563_MODULE)
-static struct tsl2563_platform_data rx51_tsl2563_platform_data = {
-	.cover_comp_gain = 16,
-};
-#endif
-
-#if defined(CONFIG_LEDS_LP5523) || defined(CONFIG_LEDS_LP5523_MODULE)
-static struct lp55xx_led_config rx51_lp5523_led_config[] = {
-	{
-		.name		= "lp5523:kb1",
-		.chan_nr	= 0,
-		.led_current	= 50,
-		.max_current	= 100,
-	}, {
-		.name		= "lp5523:kb2",
-		.chan_nr	= 1,
-		.led_current	= 50,
-		.max_current	= 100,
-	}, {
-		.name		= "lp5523:kb3",
-		.chan_nr	= 2,
-		.led_current	= 50,
-		.max_current	= 100,
-	}, {
-		.name		= "lp5523:kb4",
-		.chan_nr	= 3,
-		.led_current	= 50,
-		.max_current	= 100,
-	}, {
-		.name		= "lp5523:b",
-		.chan_nr	= 4,
-		.led_current	= 50,
-		.max_current	= 100,
-	}, {
-		.name		= "lp5523:g",
-		.chan_nr	= 5,
-		.led_current	= 50,
-		.max_current	= 100,
-	}, {
-		.name		= "lp5523:r",
-		.chan_nr	= 6,
-		.led_current	= 50,
-		.max_current	= 100,
-	}, {
-		.name		= "lp5523:kb5",
-		.chan_nr	= 7,
-		.led_current	= 50,
-		.max_current	= 100,
-	}, {
-		.name		= "lp5523:kb6",
-		.chan_nr	= 8,
-		.led_current	= 50,
-		.max_current	= 100,
-	}
-};
-
-static struct lp55xx_platform_data rx51_lp5523_platform_data = {
-	.led_config		= rx51_lp5523_led_config,
-	.num_channels		= ARRAY_SIZE(rx51_lp5523_led_config),
-	.clock_mode		= LP55XX_CLOCK_AUTO,
-	.enable_gpio		= RX51_LP5523_CHIP_EN_GPIO,
-};
-#endif
-
-#define RX51_LCD_RESET_GPIO	90
-
-static struct panel_acx565akm_platform_data acx_pdata = {
-	.name		= "lcd",
-	.source		= "sdi.0",
-	.reset_gpio	= RX51_LCD_RESET_GPIO,
-	.datapairs	= 2,
-};
-
-static struct omap2_mcspi_device_config wl1251_mcspi_config = {
-	.turbo_mode	= 0,
-};
-
-static struct omap2_mcspi_device_config mipid_mcspi_config = {
-	.turbo_mode	= 0,
-};
-
-static struct omap2_mcspi_device_config tsc2005_mcspi_config = {
-	.turbo_mode	= 0,
-};
-
-static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = {
-	[RX51_SPI_WL1251] = {
-		.modalias		= "wl1251",
-		.bus_num		= 4,
-		.chip_select		= 0,
-		.max_speed_hz   	= 48000000,
-		.mode                   = SPI_MODE_3,
-		.controller_data	= &wl1251_mcspi_config,
-		.platform_data		= &wl1251_pdata,
-	},
-	[RX51_SPI_MIPID] = {
-		.modalias		= "acx565akm",
-		.bus_num		= 1,
-		.chip_select		= 2,
-		.max_speed_hz		= 6000000,
-		.controller_data	= &mipid_mcspi_config,
-		.platform_data		= &acx_pdata,
-	},
-	[RX51_SPI_TSC2005] = {
-		.modalias		= "tsc2005",
-		.bus_num		= 1,
-		.chip_select		= 0,
-		.max_speed_hz		= 6000000,
-		.controller_data	= &tsc2005_mcspi_config,
-		.platform_data		= &tsc2005_pdata,
-	},
-};
-
-static struct platform_device rx51_battery_device = {
-	.name	= "rx51-battery",
-	.id	= -1,
-};
-
-static void rx51_charger_set_power(bool on)
-{
-	gpio_set_value(RX51_USB_TRANSCEIVER_RST_GPIO, on);
-}
-
-static struct isp1704_charger_data rx51_charger_data = {
-	.set_power	= rx51_charger_set_power,
-};
-
-static struct platform_device rx51_charger_device = {
-	.name	= "isp1704_charger",
-	.dev	= {
-		.platform_data = &rx51_charger_data,
-	},
-};
-
-static void __init rx51_charger_init(void)
-{
-	WARN_ON(gpio_request_one(RX51_USB_TRANSCEIVER_RST_GPIO,
-		GPIOF_OUT_INIT_HIGH, "isp1704_reset"));
-
-	platform_device_register(&rx51_battery_device);
-	platform_device_register(&rx51_charger_device);
-}
-
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-
-#define RX51_GPIO_CAMERA_LENS_COVER	110
-#define RX51_GPIO_CAMERA_FOCUS		68
-#define RX51_GPIO_CAMERA_CAPTURE	69
-#define RX51_GPIO_KEYPAD_SLIDE		71
-#define RX51_GPIO_LOCK_BUTTON		113
-#define RX51_GPIO_PROXIMITY		89
-
-#define RX51_GPIO_DEBOUNCE_TIMEOUT	10
-
-static struct gpio_keys_button rx51_gpio_keys[] = {
-	{
-		.desc			= "Camera Lens Cover",
-		.type			= EV_SW,
-		.code			= SW_CAMERA_LENS_COVER,
-		.gpio			= RX51_GPIO_CAMERA_LENS_COVER,
-		.active_low		= 1,
-		.debounce_interval	= RX51_GPIO_DEBOUNCE_TIMEOUT,
-	}, {
-		.desc			= "Camera Focus",
-		.type			= EV_KEY,
-		.code			= KEY_CAMERA_FOCUS,
-		.gpio			= RX51_GPIO_CAMERA_FOCUS,
-		.active_low		= 1,
-		.debounce_interval	= RX51_GPIO_DEBOUNCE_TIMEOUT,
-	}, {
-		.desc			= "Camera Capture",
-		.type			= EV_KEY,
-		.code			= KEY_CAMERA,
-		.gpio			= RX51_GPIO_CAMERA_CAPTURE,
-		.active_low		= 1,
-		.debounce_interval	= RX51_GPIO_DEBOUNCE_TIMEOUT,
-	}, {
-		.desc			= "Lock Button",
-		.type			= EV_KEY,
-		.code			= KEY_SCREENLOCK,
-		.gpio			= RX51_GPIO_LOCK_BUTTON,
-		.active_low		= 1,
-		.debounce_interval	= RX51_GPIO_DEBOUNCE_TIMEOUT,
-	}, {
-		.desc			= "Keypad Slide",
-		.type			= EV_SW,
-		.code			= SW_KEYPAD_SLIDE,
-		.gpio			= RX51_GPIO_KEYPAD_SLIDE,
-		.active_low		= 1,
-		.debounce_interval	= RX51_GPIO_DEBOUNCE_TIMEOUT,
-	}, {
-		.desc			= "Proximity Sensor",
-		.type			= EV_SW,
-		.code			= SW_FRONT_PROXIMITY,
-		.gpio			= RX51_GPIO_PROXIMITY,
-		.active_low		= 0,
-		.debounce_interval	= RX51_GPIO_DEBOUNCE_TIMEOUT,
-	}
-};
-
-static struct gpio_keys_platform_data rx51_gpio_keys_data = {
-	.buttons	= rx51_gpio_keys,
-	.nbuttons	= ARRAY_SIZE(rx51_gpio_keys),
-};
-
-static struct platform_device rx51_gpio_keys_device = {
-	.name	= "gpio-keys",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &rx51_gpio_keys_data,
-	},
-};
-
-static void __init rx51_add_gpio_keys(void)
-{
-	platform_device_register(&rx51_gpio_keys_device);
-}
-#else
-static void __init rx51_add_gpio_keys(void)
-{
-}
-#endif /* CONFIG_KEYBOARD_GPIO || CONFIG_KEYBOARD_GPIO_MODULE */
-
-static uint32_t board_keymap[] = {
-	/*
-	 * Note that KEY(x, 8, KEY_XXX) entries represent "entrire row
-	 * connected to the ground" matrix state.
-	 */
-	KEY(0, 0, KEY_Q),
-	KEY(0, 1, KEY_O),
-	KEY(0, 2, KEY_P),
-	KEY(0, 3, KEY_COMMA),
-	KEY(0, 4, KEY_BACKSPACE),
-	KEY(0, 6, KEY_A),
-	KEY(0, 7, KEY_S),
-
-	KEY(1, 0, KEY_W),
-	KEY(1, 1, KEY_D),
-	KEY(1, 2, KEY_F),
-	KEY(1, 3, KEY_G),
-	KEY(1, 4, KEY_H),
-	KEY(1, 5, KEY_J),
-	KEY(1, 6, KEY_K),
-	KEY(1, 7, KEY_L),
-
-	KEY(2, 0, KEY_E),
-	KEY(2, 1, KEY_DOT),
-	KEY(2, 2, KEY_UP),
-	KEY(2, 3, KEY_ENTER),
-	KEY(2, 5, KEY_Z),
-	KEY(2, 6, KEY_X),
-	KEY(2, 7, KEY_C),
-	KEY(2, 8, KEY_F9),
-
-	KEY(3, 0, KEY_R),
-	KEY(3, 1, KEY_V),
-	KEY(3, 2, KEY_B),
-	KEY(3, 3, KEY_N),
-	KEY(3, 4, KEY_M),
-	KEY(3, 5, KEY_SPACE),
-	KEY(3, 6, KEY_SPACE),
-	KEY(3, 7, KEY_LEFT),
-
-	KEY(4, 0, KEY_T),
-	KEY(4, 1, KEY_DOWN),
-	KEY(4, 2, KEY_RIGHT),
-	KEY(4, 4, KEY_LEFTCTRL),
-	KEY(4, 5, KEY_RIGHTALT),
-	KEY(4, 6, KEY_LEFTSHIFT),
-	KEY(4, 8, KEY_F10),
-
-	KEY(5, 0, KEY_Y),
-	KEY(5, 8, KEY_F11),
-
-	KEY(6, 0, KEY_U),
-
-	KEY(7, 0, KEY_I),
-	KEY(7, 1, KEY_F7),
-	KEY(7, 2, KEY_F8),
-};
-
-static struct matrix_keymap_data board_map_data = {
-	.keymap			= board_keymap,
-	.keymap_size		= ARRAY_SIZE(board_keymap),
-};
-
-static struct twl4030_keypad_data rx51_kp_data = {
-	.keymap_data	= &board_map_data,
-	.rows		= 8,
-	.cols		= 8,
-	.rep		= 1,
-};
-
-/* Enable input logic and pull all lines up when eMMC is on. */
-static struct omap_board_mux rx51_mmc2_on_mux[] = {
-	OMAP3_MUX(SDMMC2_CMD, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
-	OMAP3_MUX(SDMMC2_DAT0, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
-	OMAP3_MUX(SDMMC2_DAT1, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
-	OMAP3_MUX(SDMMC2_DAT2, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
-	OMAP3_MUX(SDMMC2_DAT3, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
-	OMAP3_MUX(SDMMC2_DAT4, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
-	OMAP3_MUX(SDMMC2_DAT5, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
-	OMAP3_MUX(SDMMC2_DAT6, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
-	OMAP3_MUX(SDMMC2_DAT7, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-
-/* Disable input logic and pull all lines down when eMMC is off. */
-static struct omap_board_mux rx51_mmc2_off_mux[] = {
-	OMAP3_MUX(SDMMC2_CMD, OMAP_PULL_ENA | OMAP_MUX_MODE0),
-	OMAP3_MUX(SDMMC2_DAT0, OMAP_PULL_ENA | OMAP_MUX_MODE0),
-	OMAP3_MUX(SDMMC2_DAT1, OMAP_PULL_ENA | OMAP_MUX_MODE0),
-	OMAP3_MUX(SDMMC2_DAT2, OMAP_PULL_ENA | OMAP_MUX_MODE0),
-	OMAP3_MUX(SDMMC2_DAT3, OMAP_PULL_ENA | OMAP_MUX_MODE0),
-	OMAP3_MUX(SDMMC2_DAT4, OMAP_PULL_ENA | OMAP_MUX_MODE0),
-	OMAP3_MUX(SDMMC2_DAT5, OMAP_PULL_ENA | OMAP_MUX_MODE0),
-	OMAP3_MUX(SDMMC2_DAT6, OMAP_PULL_ENA | OMAP_MUX_MODE0),
-	OMAP3_MUX(SDMMC2_DAT7, OMAP_PULL_ENA | OMAP_MUX_MODE0),
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-
-static struct omap_mux_partition *partition;
-
-/*
- * Current flows to eMMC when eMMC is off and the data lines are pulled up,
- * so pull them down. N.B. we pull 8 lines because we are using 8 lines.
- */
-static void rx51_mmc2_remux(struct device *dev, int power_on)
-{
-	if (power_on)
-		omap_mux_write_array(partition, rx51_mmc2_on_mux);
-	else
-		omap_mux_write_array(partition, rx51_mmc2_off_mux);
-}
-
-static struct omap2_hsmmc_info mmc[] __initdata = {
-	{
-		.name		= "external",
-		.mmc		= 1,
-		.caps		= MMC_CAP_4_BIT_DATA,
-		.cover_only	= true,
-		.gpio_cd	= 160,
-		.gpio_wp	= -EINVAL,
-	},
-	{
-		.name		= "internal",
-		.mmc		= 2,
-		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
-						/* See also rx51_mmc2_remux */
-		.gpio_cd	= -EINVAL,
-		.gpio_wp	= -EINVAL,
-		.nonremovable	= true,
-		.remux		= rx51_mmc2_remux,
-	},
-	{}	/* Terminator */
-};
-
-static struct regulator_consumer_supply rx51_vmmc1_supply[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
-};
-
-static struct regulator_consumer_supply rx51_vaux2_supply[] = {
-	REGULATOR_SUPPLY("vdds_csib", "omap3isp"),
-};
-
-static struct regulator_consumer_supply rx51_vaux3_supply[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
-};
-
-static struct regulator_consumer_supply rx51_vsim_supply[] = {
-	REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.1"),
-};
-
-static struct regulator_consumer_supply rx51_vmmc2_supplies[] = {
-	/* tlv320aic3x analog supplies */
-	REGULATOR_SUPPLY("AVDD", "2-0018"),
-	REGULATOR_SUPPLY("DRVDD", "2-0018"),
-	REGULATOR_SUPPLY("AVDD", "2-0019"),
-	REGULATOR_SUPPLY("DRVDD", "2-0019"),
-	/* tpa6130a2 */
-	REGULATOR_SUPPLY("Vdd", "2-0060"),
-	/* Keep vmmc as last item. It is not iterated for newer boards */
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
-};
-
-static struct regulator_consumer_supply rx51_vio_supplies[] = {
-	/* tlv320aic3x digital supplies */
-	REGULATOR_SUPPLY("IOVDD", "2-0018"),
-	REGULATOR_SUPPLY("DVDD", "2-0018"),
-	REGULATOR_SUPPLY("IOVDD", "2-0019"),
-	REGULATOR_SUPPLY("DVDD", "2-0019"),
-	/* Si4713 IO supply */
-	REGULATOR_SUPPLY("vio", "2-0063"),
-	/* lis3lv02d */
-	REGULATOR_SUPPLY("Vdd_IO", "3-001d"),
-};
-
-static struct regulator_consumer_supply rx51_vaux1_consumers[] = {
-	REGULATOR_SUPPLY("vdds_sdi", "omapdss"),
-	REGULATOR_SUPPLY("vdds_sdi", "omapdss_sdi.0"),
-	/* Si4713 supply */
-	REGULATOR_SUPPLY("vdd", "2-0063"),
-	/* lis3lv02d */
-	REGULATOR_SUPPLY("Vdd", "3-001d"),
-};
-
-static struct regulator_init_data rx51_vaux1 = {
-	.constraints = {
-		.name			= "V28",
-		.min_uV			= 2800000,
-		.max_uV			= 2800000,
-		.always_on		= true, /* due battery cover sensor */
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(rx51_vaux1_consumers),
-	.consumer_supplies	= rx51_vaux1_consumers,
-};
-
-static struct regulator_init_data rx51_vaux2 = {
-	.constraints = {
-		.name			= "VCSI",
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(rx51_vaux2_supply),
-	.consumer_supplies	= rx51_vaux2_supply,
-};
-
-/* VAUX3 - adds more power to VIO_18 rail */
-static struct regulator_init_data rx51_vaux3_cam = {
-	.constraints = {
-		.name			= "VCAM_DIG_18",
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-};
-
-static struct regulator_init_data rx51_vaux3_mmc = {
-	.constraints = {
-		.name			= "VMMC2_30",
-		.min_uV			= 2800000,
-		.max_uV			= 3000000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(rx51_vaux3_supply),
-	.consumer_supplies	= rx51_vaux3_supply,
-};
-
-static struct regulator_init_data rx51_vaux4 = {
-	.constraints = {
-		.name			= "VCAM_ANA_28",
-		.min_uV			= 2800000,
-		.max_uV			= 2800000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-};
-
-static struct regulator_init_data rx51_vmmc1 = {
-	.constraints = {
-		.min_uV			= 1850000,
-		.max_uV			= 3150000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(rx51_vmmc1_supply),
-	.consumer_supplies	= rx51_vmmc1_supply,
-};
-
-static struct regulator_init_data rx51_vmmc2 = {
-	.constraints = {
-		.name			= "V28_A",
-		.min_uV			= 2800000,
-		.max_uV			= 3000000,
-		.always_on		= true, /* due VIO leak to AIC34 VDDs */
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(rx51_vmmc2_supplies),
-	.consumer_supplies	= rx51_vmmc2_supplies,
-};
-
-static struct regulator_init_data rx51_vpll1 = {
-	.constraints = {
-		.name			= "VPLL",
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.apply_uV		= true,
-		.always_on		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE,
-	},
-};
-
-static struct regulator_init_data rx51_vpll2 = {
-	.constraints = {
-		.name			= "VSDI_CSI",
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.apply_uV		= true,
-		.always_on		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE,
-	},
-};
-
-static struct regulator_init_data rx51_vsim = {
-	.constraints = {
-		.name			= "VMMC2_IO_18",
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(rx51_vsim_supply),
-	.consumer_supplies	= rx51_vsim_supply,
-};
-
-static struct regulator_init_data rx51_vio = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(rx51_vio_supplies),
-	.consumer_supplies	= rx51_vio_supplies,
-};
-
-static struct regulator_init_data rx51_vintana1 = {
-	.constraints = {
-		.name			= "VINTANA1",
-		.min_uV			= 1500000,
-		.max_uV			= 1500000,
-		.always_on		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE,
-	},
-};
-
-static struct regulator_init_data rx51_vintana2 = {
-	.constraints = {
-		.name			= "VINTANA2",
-		.min_uV			= 2750000,
-		.max_uV			= 2750000,
-		.apply_uV		= true,
-		.always_on		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE,
-	},
-};
-
-static struct regulator_init_data rx51_vintdig = {
-	.constraints = {
-		.name			= "VINTDIG",
-		.min_uV			= 1500000,
-		.max_uV			= 1500000,
-		.always_on		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE,
-	},
-};
-
-static struct gpiod_lookup_table rx51_fmtx_gpios_table = {
-	.dev_id = "2-0063",
-	.table = {
-		GPIO_LOOKUP("gpio.6", 3, "reset", GPIO_ACTIVE_HIGH), /* 163 */
-		{ },
-	},
-};
-
-static __init void rx51_gpio_init(void)
-{
-	gpiod_add_lookup_table(&rx51_fmtx_gpios_table);
-}
-
-static int rx51_twlgpio_setup(struct device *dev, unsigned gpio, unsigned n)
-{
-	/* FIXME this gpio setup is just a placeholder for now */
-	gpio_request_one(gpio + 6, GPIOF_OUT_INIT_LOW, "backlight_pwm");
-	gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "speaker_en");
-
-	return 0;
-}
-
-static struct twl4030_gpio_platform_data rx51_gpio_data = {
-	.pulldowns		= BIT(0) | BIT(1) | BIT(2) | BIT(3)
-				| BIT(4) | BIT(5)
-				| BIT(8) | BIT(9) | BIT(10) | BIT(11)
-				| BIT(12) | BIT(13) | BIT(14) | BIT(15)
-				| BIT(16) | BIT(17) ,
-	.setup			= rx51_twlgpio_setup,
-};
-
-static struct twl4030_ins sleep_on_seq[] __initdata = {
-/*
- * Turn off everything
- */
-	{MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 1, 0, RES_STATE_SLEEP), 2},
-};
-
-static struct twl4030_script sleep_on_script __initdata = {
-	.script = sleep_on_seq,
-	.size   = ARRAY_SIZE(sleep_on_seq),
-	.flags  = TWL4030_SLEEP_SCRIPT,
-};
-
-static struct twl4030_ins wakeup_seq[] __initdata = {
-/*
- * Reenable everything
- */
-	{MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 1, 0, RES_STATE_ACTIVE), 2},
-};
-
-static struct twl4030_script wakeup_script __initdata = {
-	.script	= wakeup_seq,
-	.size	= ARRAY_SIZE(wakeup_seq),
-	.flags	= TWL4030_WAKEUP12_SCRIPT,
-};
-
-static struct twl4030_ins wakeup_p3_seq[] __initdata = {
-/*
- * Reenable everything
- */
-	{MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 1, 0, RES_STATE_ACTIVE), 2},
-};
-
-static struct twl4030_script wakeup_p3_script __initdata = {
-	.script	= wakeup_p3_seq,
-	.size	= ARRAY_SIZE(wakeup_p3_seq),
-	.flags	= TWL4030_WAKEUP3_SCRIPT,
-};
-
-static struct twl4030_ins wrst_seq[] __initdata = {
-/*
- * Reset twl4030.
- * Reset VDD1 regulator.
- * Reset VDD2 regulator.
- * Reset VPLL1 regulator.
- * Enable sysclk output.
- * Reenable twl4030.
- */
-	{MSG_SINGULAR(DEV_GRP_NULL, RES_RESET, RES_STATE_OFF), 2},
-	{MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 0, 1, RES_STATE_ACTIVE),
-		0x13},
-	{MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_PP, 0, 3, RES_STATE_OFF), 0x13},
-	{MSG_SINGULAR(DEV_GRP_NULL, RES_VDD1, RES_STATE_WRST), 0x13},
-	{MSG_SINGULAR(DEV_GRP_NULL, RES_VDD2, RES_STATE_WRST), 0x13},
-	{MSG_SINGULAR(DEV_GRP_NULL, RES_VPLL1, RES_STATE_WRST), 0x35},
-	{MSG_SINGULAR(DEV_GRP_P3, RES_HFCLKOUT, RES_STATE_ACTIVE), 2},
-	{MSG_SINGULAR(DEV_GRP_NULL, RES_RESET, RES_STATE_ACTIVE), 2},
-};
-
-static struct twl4030_script wrst_script __initdata = {
-	.script = wrst_seq,
-	.size   = ARRAY_SIZE(wrst_seq),
-	.flags  = TWL4030_WRST_SCRIPT,
-};
-
-static struct twl4030_script *twl4030_scripts[] __initdata = {
-	/* wakeup12 script should be loaded before sleep script, otherwise a
-	   board might hit retention before loading of wakeup script is
-	   completed. This can cause boot failures depending on timing issues.
-	*/
-	&wakeup_script,
-	&sleep_on_script,
-	&wakeup_p3_script,
-	&wrst_script,
-};
-
-static struct twl4030_resconfig twl4030_rconfig[] __initdata = {
-	{ .resource = RES_VDD1, .devgroup = -1,
-	  .type = 1, .type2 = -1, .remap_off = RES_STATE_OFF,
-	  .remap_sleep = RES_STATE_OFF
-	},
-	{ .resource = RES_VDD2, .devgroup = -1,
-	  .type = 1, .type2 = -1, .remap_off = RES_STATE_OFF,
-	  .remap_sleep = RES_STATE_OFF
-	},
-	{ .resource = RES_VPLL1, .devgroup = -1,
-	  .type = 1, .type2 = -1, .remap_off = RES_STATE_OFF,
-	  .remap_sleep = RES_STATE_OFF
-	},
-	{ .resource = RES_VPLL2, .devgroup = -1,
-	  .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
-	},
-	{ .resource = RES_VAUX1, .devgroup = -1,
-	  .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
-	},
-	{ .resource = RES_VAUX2, .devgroup = -1,
-	  .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
-	},
-	{ .resource = RES_VAUX3, .devgroup = -1,
-	  .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
-	},
-	{ .resource = RES_VAUX4, .devgroup = -1,
-	  .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
-	},
-	{ .resource = RES_VMMC1, .devgroup = -1,
-	  .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
-	},
-	{ .resource = RES_VMMC2, .devgroup = -1,
-	  .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
-	},
-	{ .resource = RES_VDAC, .devgroup = -1,
-	  .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
-	},
-	{ .resource = RES_VSIM, .devgroup = -1,
-	  .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
-	},
-	{ .resource = RES_VINTANA1, .devgroup = DEV_GRP_P1 | DEV_GRP_P3,
-	  .type = -1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
-	},
-	{ .resource = RES_VINTANA2, .devgroup = DEV_GRP_P1 | DEV_GRP_P3,
-	  .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
-	},
-	{ .resource = RES_VINTDIG, .devgroup = DEV_GRP_P1 | DEV_GRP_P3,
-	  .type = -1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
-	},
-	{ .resource = RES_VIO, .devgroup = DEV_GRP_P3,
-	  .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
-	},
-	{ .resource = RES_CLKEN, .devgroup = DEV_GRP_P1 | DEV_GRP_P3,
-	  .type = 1, .type2 = -1 , .remap_off = -1, .remap_sleep = -1
-	},
-	{ .resource = RES_REGEN, .devgroup = DEV_GRP_P1 | DEV_GRP_P3,
-	  .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
-	},
-	{ .resource = RES_NRES_PWRON, .devgroup = DEV_GRP_P1 | DEV_GRP_P3,
-	  .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
-	},
-	{ .resource = RES_SYSEN, .devgroup = DEV_GRP_P1 | DEV_GRP_P3,
-	  .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
-	},
-	{ .resource = RES_HFCLKOUT, .devgroup = DEV_GRP_P3,
-	  .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
-	},
-	{ .resource = RES_32KCLKOUT, .devgroup = -1,
-	  .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
-	},
-	{ .resource = RES_RESET, .devgroup = -1,
-	  .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
-	},
-	{ .resource = RES_MAIN_REF, .devgroup = -1,
-	  .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
-	},
-	{ 0, 0},
-};
-
-static struct twl4030_power_data rx51_t2scripts_data __initdata = {
-	.scripts        = twl4030_scripts,
-	.num = ARRAY_SIZE(twl4030_scripts),
-	.resource_config = twl4030_rconfig,
-};
-
-static struct twl4030_vibra_data rx51_vibra_data __initdata = {
-	.coexist	= 0,
-};
-
-static struct twl4030_audio_data rx51_audio_data __initdata = {
-	.audio_mclk	= 26000000,
-	.vibra		= &rx51_vibra_data,
-};
-
-static struct twl4030_platform_data rx51_twldata __initdata = {
-	/* platform_data for children goes here */
-	.gpio			= &rx51_gpio_data,
-	.keypad			= &rx51_kp_data,
-	.power			= &rx51_t2scripts_data,
-	.audio			= &rx51_audio_data,
-
-	.vaux1			= &rx51_vaux1,
-	.vaux2			= &rx51_vaux2,
-	.vaux4			= &rx51_vaux4,
-	.vmmc1			= &rx51_vmmc1,
-	.vpll1			= &rx51_vpll1,
-	.vpll2			= &rx51_vpll2,
-	.vsim			= &rx51_vsim,
-	.vintana1		= &rx51_vintana1,
-	.vintana2		= &rx51_vintana2,
-	.vintdig		= &rx51_vintdig,
-	.vio			= &rx51_vio,
-};
-
-static struct tpa6130a2_platform_data rx51_tpa6130a2_data __initdata_or_module = {
-	.power_gpio		= 98,
-};
-
-/* Audio setup data */
-static struct aic3x_setup_data rx51_aic34_setup = {
-	.gpio_func[0] = AIC3X_GPIO1_FUNC_DISABLED,
-	.gpio_func[1] = AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT,
-};
-
-static struct aic3x_pdata rx51_aic3x_data = {
-	.setup = &rx51_aic34_setup,
-	.gpio_reset = 60,
-};
-
-static struct aic3x_pdata rx51_aic3x_data2 = {
-	.gpio_reset = 60,
-};
-
-#if IS_ENABLED(CONFIG_I2C_SI4713) && IS_ENABLED(CONFIG_PLATFORM_SI4713)
-static struct si4713_platform_data rx51_si4713_platform_data = {
-	.is_platform_device = true
-};
-#endif
-
-static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_2[] = {
-#if IS_ENABLED(CONFIG_I2C_SI4713) && IS_ENABLED(CONFIG_PLATFORM_SI4713)
-	{
-		I2C_BOARD_INFO("si4713", 0x63),
-		.platform_data = &rx51_si4713_platform_data,
-	},
-#endif
-	{
-		I2C_BOARD_INFO("tlv320aic3x", 0x18),
-		.platform_data = &rx51_aic3x_data,
-	},
-	{
-		I2C_BOARD_INFO("tlv320aic3x", 0x19),
-		.platform_data = &rx51_aic3x_data2,
-	},
-#if defined(CONFIG_SENSORS_TSL2563) || defined(CONFIG_SENSORS_TSL2563_MODULE)
-	{
-		I2C_BOARD_INFO("tsl2563", 0x29),
-		.platform_data = &rx51_tsl2563_platform_data,
-	},
-#endif
-#if defined(CONFIG_LEDS_LP5523) || defined(CONFIG_LEDS_LP5523_MODULE)
-	{
-		I2C_BOARD_INFO("lp5523", 0x32),
-		.platform_data  = &rx51_lp5523_platform_data,
-	},
-#endif
-	{
-		I2C_BOARD_INFO("bq27200", 0x55),
-	},
-	{
-		I2C_BOARD_INFO("tpa6130a2", 0x60),
-		.platform_data = &rx51_tpa6130a2_data,
-	}
-};
-
-static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_3[] = {
-#if defined(CONFIG_SENSORS_LIS3_I2C) || defined(CONFIG_SENSORS_LIS3_I2C_MODULE)
-	{
-		I2C_BOARD_INFO("lis3lv02d", 0x1d),
-		.platform_data = &rx51_lis3lv02d_data,
-	},
-#endif
-};
-
-static int __init rx51_i2c_init(void)
-{
-#if IS_ENABLED(CONFIG_I2C_SI4713) && IS_ENABLED(CONFIG_PLATFORM_SI4713)
-	int err;
-#endif
-
-	if ((system_rev >= SYSTEM_REV_S_USES_VAUX3 && system_rev < 0x100) ||
-	    system_rev >= SYSTEM_REV_B_USES_VAUX3) {
-		rx51_twldata.vaux3 = &rx51_vaux3_mmc;
-		/* Only older boards use VMMC2 for internal MMC */
-		rx51_vmmc2.num_consumer_supplies--;
-	} else {
-		rx51_twldata.vaux3 = &rx51_vaux3_cam;
-	}
-	rx51_twldata.vmmc2 = &rx51_vmmc2;
-	omap3_pmic_get_config(&rx51_twldata,
-			TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC,
-			TWL_COMMON_REGULATOR_VDAC);
-
-	rx51_twldata.vdac->constraints.apply_uV = true;
-	rx51_twldata.vdac->constraints.name = "VDAC";
-
-	omap_pmic_init(1, 2200, "twl5030", 7 + OMAP_INTC_START, &rx51_twldata);
-#if IS_ENABLED(CONFIG_I2C_SI4713) && IS_ENABLED(CONFIG_PLATFORM_SI4713)
-	err = gpio_request_one(RX51_FMTX_IRQ, GPIOF_DIR_IN, "si4713 irq");
-	if (err) {
-		printk(KERN_ERR "Cannot request si4713 irq gpio. %d\n", err);
-		return err;
-	}
-	rx51_peripherals_i2c_board_info_2[0].irq = gpio_to_irq(RX51_FMTX_IRQ);
-#endif
-	omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2,
-			      ARRAY_SIZE(rx51_peripherals_i2c_board_info_2));
-#if defined(CONFIG_SENSORS_LIS3_I2C) || defined(CONFIG_SENSORS_LIS3_I2C_MODULE)
-	rx51_lis3lv02d_data.irq2 = gpio_to_irq(LIS302_IRQ2_GPIO);
-	rx51_peripherals_i2c_board_info_3[0].irq = gpio_to_irq(LIS302_IRQ1_GPIO);
-#endif
-	omap_register_i2c_bus(3, 400, rx51_peripherals_i2c_board_info_3,
-			      ARRAY_SIZE(rx51_peripherals_i2c_board_info_3));
-	return 0;
-}
-
-#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
-	defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
-
-static struct mtd_partition onenand_partitions[] = {
-	{
-		.name           = "bootloader",
-		.offset         = 0,
-		.size           = 0x20000,
-		.mask_flags     = MTD_WRITEABLE,	/* Force read-only */
-	},
-	{
-		.name           = "config",
-		.offset         = MTDPART_OFS_APPEND,
-		.size           = 0x60000,
-	},
-	{
-		.name           = "log",
-		.offset         = MTDPART_OFS_APPEND,
-		.size           = 0x40000,
-	},
-	{
-		.name           = "kernel",
-		.offset         = MTDPART_OFS_APPEND,
-		.size           = 0x200000,
-	},
-	{
-		.name           = "initfs",
-		.offset         = MTDPART_OFS_APPEND,
-		.size           = 0x200000,
-	},
-	{
-		.name           = "rootfs",
-		.offset         = MTDPART_OFS_APPEND,
-		.size           = MTDPART_SIZ_FULL,
-	},
-};
-
-static struct omap_onenand_platform_data board_onenand_data[] = {
-	{
-		.cs		= 0,
-		.gpio_irq	= 65,
-		.parts		= onenand_partitions,
-		.nr_parts	= ARRAY_SIZE(onenand_partitions),
-		.flags		= ONENAND_SYNC_READWRITE,
-	}
-};
-#endif
-
-static struct gpio rx51_wl1251_gpios[] __initdata = {
-	{ RX51_WL1251_IRQ_GPIO,	  GPIOF_IN,		"wl1251 irq"	},
-};
-
-static void __init rx51_init_wl1251(void)
-{
-	int irq, ret;
-
-	ret = gpio_request_array(rx51_wl1251_gpios,
-				 ARRAY_SIZE(rx51_wl1251_gpios));
-	if (ret < 0)
-		goto error;
-
-	irq = gpio_to_irq(RX51_WL1251_IRQ_GPIO);
-	if (irq < 0)
-		goto err_irq;
-
-	wl1251_pdata.power_gpio = RX51_WL1251_POWER_GPIO;
-	rx51_peripherals_spi_board_info[RX51_SPI_WL1251].irq = irq;
-
-	return;
-
-err_irq:
-	gpio_free(RX51_WL1251_IRQ_GPIO);
-error:
-	printk(KERN_ERR "wl1251 board initialisation failed\n");
-	wl1251_pdata.power_gpio = -1;
-
-	/*
-	 * Now rx51_peripherals_spi_board_info[1].irq is zero and
-	 * set_power is null, and wl1251_probe() will fail.
-	 */
-}
-
-static struct tsc2005_platform_data tsc2005_pdata = {
-	.ts_pressure_max	= 2048,
-	.ts_pressure_fudge	= 2,
-	.ts_x_max		= 4096,
-	.ts_x_fudge		= 4,
-	.ts_y_max		= 4096,
-	.ts_y_fudge		= 7,
-	.ts_x_plate_ohm		= 280,
-	.esd_timeout_ms		= 8000,
-};
-
-static struct gpio rx51_tsc2005_gpios[] __initdata = {
-	{ RX51_TSC2005_IRQ_GPIO,   GPIOF_IN,		"tsc2005 IRQ"	},
-	{ RX51_TSC2005_RESET_GPIO, GPIOF_OUT_INIT_HIGH,	"tsc2005 reset"	},
-};
-
-static void rx51_tsc2005_set_reset(bool enable)
-{
-	gpio_set_value(RX51_TSC2005_RESET_GPIO, enable);
-}
-
-static void __init rx51_init_tsc2005(void)
-{
-	int r;
-
-	omap_mux_init_gpio(RX51_TSC2005_RESET_GPIO, OMAP_PIN_OUTPUT);
-	omap_mux_init_gpio(RX51_TSC2005_IRQ_GPIO, OMAP_PIN_INPUT_PULLUP);
-
-	r = gpio_request_array(rx51_tsc2005_gpios,
-			       ARRAY_SIZE(rx51_tsc2005_gpios));
-	if (r < 0) {
-		printk(KERN_ERR "tsc2005 board initialization failed\n");
-		tsc2005_pdata.esd_timeout_ms = 0;
-		return;
-	}
-
-	tsc2005_pdata.set_reset = rx51_tsc2005_set_reset;
-	rx51_peripherals_spi_board_info[RX51_SPI_TSC2005].irq =
-				gpio_to_irq(RX51_TSC2005_IRQ_GPIO);
-}
-
-#if IS_ENABLED(CONFIG_OMAP_DM_TIMER)
-static struct pwm_omap_dmtimer_pdata __maybe_unused pwm_dmtimer_pdata = {
-	.request_by_node = omap_dm_timer_request_by_node,
-	.request_specific = omap_dm_timer_request_specific,
-	.request = omap_dm_timer_request,
-	.set_source = omap_dm_timer_set_source,
-	.get_irq = omap_dm_timer_get_irq,
-	.set_int_enable = omap_dm_timer_set_int_enable,
-	.set_int_disable = omap_dm_timer_set_int_disable,
-	.free = omap_dm_timer_free,
-	.enable = omap_dm_timer_enable,
-	.disable = omap_dm_timer_disable,
-	.get_fclk = omap_dm_timer_get_fclk,
-	.start = omap_dm_timer_start,
-	.stop = omap_dm_timer_stop,
-	.set_load = omap_dm_timer_set_load,
-	.set_match = omap_dm_timer_set_match,
-	.set_pwm = omap_dm_timer_set_pwm,
-	.set_prescaler = omap_dm_timer_set_prescaler,
-	.read_counter = omap_dm_timer_read_counter,
-	.write_counter = omap_dm_timer_write_counter,
-	.read_status = omap_dm_timer_read_status,
-	.write_status = omap_dm_timer_write_status,
-};
-#endif
-
-#if defined(CONFIG_IR_RX51) || defined(CONFIG_IR_RX51_MODULE)
-static struct lirc_rx51_platform_data rx51_lirc_data = {
-	.set_max_mpu_wakeup_lat = omap_pm_set_max_mpu_wakeup_lat,
-};
-
-static struct platform_device rx51_lirc_device = {
-	.name           = "lirc_rx51",
-	.id             = -1,
-	.dev            = {
-		.platform_data = &rx51_lirc_data,
-	},
-};
-
-static void __init rx51_init_lirc(void)
-{
-	platform_device_register(&rx51_lirc_device);
-}
-#else
-static void __init rx51_init_lirc(void)
-{
-}
-#endif
-
-static struct platform_device madc_hwmon = {
-	.name	= "twl4030_madc_hwmon",
-	.id	= -1,
-};
-
-static void __init rx51_init_twl4030_hwmon(void)
-{
-	platform_device_register(&madc_hwmon);
-}
-
-static struct platform_device omap3_rom_rng_device = {
-	.name		= "omap3-rom-rng",
-	.id		= -1,
-	.dev	= {
-		.platform_data	= rx51_secure_rng_call,
-	},
-};
-
-static void __init rx51_init_omap3_rom_rng(void)
-{
-	if (omap_type() == OMAP2_DEVICE_TYPE_SEC) {
-		pr_info("RX-51: Registering OMAP3 HWRNG device\n");
-		platform_device_register(&omap3_rom_rng_device);
-	}
-}
-
-void __init rx51_peripherals_init(void)
-{
-	rx51_gpio_init();
-	rx51_i2c_init();
-	regulator_has_full_constraints();
-	gpmc_onenand_init(board_onenand_data);
-	rx51_add_gpio_keys();
-	rx51_init_wl1251();
-	rx51_init_tsc2005();
-	rx51_init_lirc();
-	spi_register_board_info(rx51_peripherals_spi_board_info,
-				ARRAY_SIZE(rx51_peripherals_spi_board_info));
-
-	partition = omap_mux_get("core");
-	if (partition)
-		omap_hsmmc_init(mmc);
-
-	rx51_charger_init();
-	rx51_init_twl4030_hwmon();
-	rx51_init_omap3_rom_rng();
-}
-
diff --git a/arch/arm/mach-omap2/board-rx51-video.c b/arch/arm/mach-omap2/board-rx51-video.c
deleted file mode 100644
index 180c6aa..0000000
--- a/arch/arm/mach-omap2/board-rx51-video.c
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/board-rx51-video.c
- *
- * Copyright (C) 2010 Nokia
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/spi/spi.h>
-#include <linux/mm.h>
-#include <asm/mach-types.h>
-#include <linux/platform_data/omapdss.h>
-#include <video/omap-panel-data.h>
-
-#include <linux/platform_data/spi-omap2-mcspi.h>
-
-#include "soc.h"
-#include "board-rx51.h"
-#include "display.h"
-
-#include "mux.h"
-
-#define RX51_LCD_RESET_GPIO	90
-
-#if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
-
-static struct connector_atv_platform_data rx51_tv_pdata = {
-	.name = "tv",
-	.source = "venc.0",
-	.invert_polarity = false,
-};
-
-static struct platform_device rx51_tv_connector_device = {
-	.name                   = "connector-analog-tv",
-	.id                     = 0,
-	.dev.platform_data      = &rx51_tv_pdata,
-};
-
-static struct omap_dss_board_info rx51_dss_board_info = {
-	.default_display_name = "lcd",
-};
-
-static int __init rx51_video_init(void)
-{
-	if (!machine_is_nokia_rx51())
-		return 0;
-
-	if (omap_mux_init_gpio(RX51_LCD_RESET_GPIO, OMAP_PIN_OUTPUT)) {
-		pr_err("%s cannot configure MUX for LCD RESET\n", __func__);
-		return 0;
-	}
-
-	omap_display_init(&rx51_dss_board_info);
-
-	platform_device_register(&rx51_tv_connector_device);
-
-	return 0;
-}
-
-omap_subsys_initcall(rx51_video_init);
-#endif /* defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE) */
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
deleted file mode 100644
index 41161ca9..0000000
--- a/arch/arm/mach-omap2/board-rx51.c
+++ /dev/null
@@ -1,141 +0,0 @@
-/*
- * Board support file for Nokia N900 (aka RX-51).
- *
- * Copyright (C) 2007, 2008 Nokia
- * Copyright (C) 2012 Ivaylo Dimitrov <freemangordon@abv.bg>
- * Copyright (C) 2013 Pali Rohár <pali.rohar@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/usb/phy.h>
-#include <linux/usb/musb.h>
-#include <linux/platform_data/spi-omap2-mcspi.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <linux/omap-dma.h>
-
-#include "common.h"
-#include "mux.h"
-#include "gpmc.h"
-#include "pm.h"
-#include "soc.h"
-#include "sdram-nokia.h"
-#include "omap-secure.h"
-
-#define RX51_GPIO_SLEEP_IND 162
-
-static struct gpio_led gpio_leds[] = {
-	{
-		.name	= "sleep_ind",
-		.gpio	= RX51_GPIO_SLEEP_IND,
-	},
-};
-
-static struct gpio_led_platform_data gpio_led_info = {
-	.leds		= gpio_leds,
-	.num_leds	= ARRAY_SIZE(gpio_leds),
-};
-
-static struct platform_device leds_gpio = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &gpio_led_info,
-	},
-};
-
-/*
- * cpuidle C-states definition for rx51.
- *
- * The 'exit_latency' field is the sum of sleep
- * and wake-up latencies.
-
-    ---------------------------------------------
-   | state |  exit_latency  |  target_residency  |
-    ---------------------------------------------
-   |  C1   |    110 + 162   |            5       |
-   |  C2   |    106 + 180   |          309       |
-   |  C3   |    107 + 410   |        46057       |
-   |  C4   |    121 + 3374  |        46057       |
-   |  C5   |    855 + 1146  |        46057       |
-   |  C6   |   7580 + 4134  |       484329       |
-   |  C7   |   7505 + 15274 |       484329       |
-    ---------------------------------------------
-
-*/
-
-extern void __init rx51_peripherals_init(void);
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#endif
-
-static struct omap_musb_board_data musb_board_data = {
-	.interface_type		= MUSB_INTERFACE_ULPI,
-	.mode			= MUSB_OTG,
-	.power			= 0,
-};
-
-static void __init rx51_init(void)
-{
-	struct omap_sdrc_params *sdrc_params;
-
-	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
-	omap_serial_init();
-
-	sdrc_params = nokia_get_sdram_timings();
-	omap_sdrc_init(sdrc_params, sdrc_params);
-
-	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
-	usb_musb_init(&musb_board_data);
-	rx51_peripherals_init();
-
-	if (omap_type() == OMAP2_DEVICE_TYPE_SEC) {
-#ifdef CONFIG_ARM_ERRATA_430973
-		pr_info("RX-51: Enabling ARM errata 430973 workaround\n");
-		/* set IBE to 1 */
-		rx51_secure_update_aux_cr(BIT(6), 0);
-#endif
-	}
-
-	/* Ensure SDRC pins are mux'd for self-refresh */
-	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
-	omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
-
-	platform_device_register(&leds_gpio);
-}
-
-static void __init rx51_reserve(void)
-{
-	omap_reserve();
-}
-
-MACHINE_START(NOKIA_RX51, "Nokia RX-51 board")
-	/* Maintainer: Lauri Leukkunen <lauri.leukkunen@nokia.com> */
-	.atag_offset	= 0x100,
-	.reserve	= rx51_reserve,
-	.map_io		= omap3_map_io,
-	.init_early	= omap3430_init_early,
-	.init_irq	= omap3_init_irq,
-	.init_machine	= rx51_init,
-	.init_late	= omap3430_init_late,
-	.init_time	= omap_init_time,
-	.restart	= omap3xxx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-omap2/board-rx51.h b/arch/arm/mach-omap2/board-rx51.h
deleted file mode 100644
index b76f49e..0000000
--- a/arch/arm/mach-omap2/board-rx51.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/*
- * Defines for rx51 boards
- */
-
-#ifndef _OMAP_BOARD_RX51_H
-#define _OMAP_BOARD_RX51_H
-
-extern void __init rx51_peripherals_init(void);
-extern void __init rx51_video_mem_init(void);
-
-#endif
diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c
index d246efd..5388fcd 100644
--- a/arch/arm/mach-omap2/common-board-devices.c
+++ b/arch/arm/mach-omap2/common-board-devices.c
@@ -29,8 +29,7 @@
 #include "common.h"
 #include "common-board-devices.h"
 
-#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
-	defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_ADS7846)
 static struct omap2_mcspi_device_config ads7846_mcspi_config = {
 	.turbo_mode	= 0,
 };
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index d7f1d69..60a20f3 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -67,7 +67,7 @@
 
 static inline void omap_init_sti(void) {}
 
-#if defined(CONFIG_SPI_OMAP24XX) || defined(CONFIG_SPI_OMAP24XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_OMAP24XX)
 
 #include <linux/platform_data/spi-omap2-mcspi.h>
 
@@ -163,9 +163,8 @@
 
 /*-------------------------------------------------------------------------*/
 
-#if defined(CONFIG_VIDEO_OMAP2_VOUT) || \
-	defined(CONFIG_VIDEO_OMAP2_VOUT_MODULE)
-#if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
+#if IS_ENABLED(CONFIG_VIDEO_OMAP2_VOUT)
+#if IS_ENABLED(CONFIG_FB_OMAP2)
 static struct resource omap_vout_resource[3 - CONFIG_FB_OMAP2_NUM_FBS] = {
 };
 #else
diff --git a/arch/arm/mach-omap2/drm.c b/arch/arm/mach-omap2/drm.c
index facd740..44fef96 100644
--- a/arch/arm/mach-omap2/drm.c
+++ b/arch/arm/mach-omap2/drm.c
@@ -28,7 +28,7 @@
 #include "soc.h"
 #include "display.h"
 
-#if defined(CONFIG_DRM_OMAP) || defined(CONFIG_DRM_OMAP_MODULE)
+#if IS_ENABLED(CONFIG_DRM_OMAP)
 
 static struct omap_drm_platform_data platform_data;
 
diff --git a/arch/arm/mach-omap2/fb.c b/arch/arm/mach-omap2/fb.c
index 1f1ecf8..ecd00b6 100644
--- a/arch/arm/mach-omap2/fb.c
+++ b/arch/arm/mach-omap2/fb.c
@@ -90,7 +90,7 @@
 int __init omap_init_vrfb(void) { return 0; }
 #endif
 
-#if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
+#if IS_ENABLED(CONFIG_FB_OMAP2)
 
 static u64 omap_fb_dma_mask = ~(u32)0;
 static struct omapfb_platform_data omapfb_config;
diff --git a/arch/arm/mach-omap2/gpmc-smsc911x.h b/arch/arm/mach-omap2/gpmc-smsc911x.h
index ea6c9c8..99a05b8 100644
--- a/arch/arm/mach-omap2/gpmc-smsc911x.h
+++ b/arch/arm/mach-omap2/gpmc-smsc911x.h
@@ -21,7 +21,7 @@
 	u32	flags;
 };
 
-#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+#if IS_ENABLED(CONFIG_SMSC911X)
 
 extern void gpmc_smsc911x_init(struct omap_smsc911x_platform_data *d);
 
diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
index cff079e..4780977 100644
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -26,7 +26,7 @@
 #include "hsmmc.h"
 #include "control.h"
 
-#if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
+#if IS_ENABLED(CONFIG_MMC_OMAP_HS)
 
 static u16 control_pbias_offset;
 static u16 control_devconf1_offset;
diff --git a/arch/arm/mach-omap2/hsmmc.h b/arch/arm/mach-omap2/hsmmc.h
index 148cd9b..69b619d 100644
--- a/arch/arm/mach-omap2/hsmmc.h
+++ b/arch/arm/mach-omap2/hsmmc.h
@@ -28,7 +28,7 @@
 	void (*init_card)(struct mmc_card *card);
 };
 
-#if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
+#if IS_ENABLED(CONFIG_MMC_OMAP_HS)
 
 void omap_hsmmc_init(struct omap2_hsmmc_info *);
 void omap_hsmmc_late_init(struct omap2_hsmmc_info *);
diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c
index 292eca0..a72738e 100644
--- a/arch/arm/mach-omap2/twl-common.c
+++ b/arch/arm/mach-omap2/twl-common.c
@@ -532,8 +532,7 @@
 }
 #endif /* CONFIG_ARCH_OMAP4 */
 
-#if defined(CONFIG_SND_OMAP_SOC_OMAP_TWL4030) || \
-	defined(CONFIG_SND_OMAP_SOC_OMAP_TWL4030_MODULE)
+#if IS_ENABLED(CONFIG_SND_OMAP_SOC_OMAP_TWL4030)
 #include <linux/platform_data/omap-twl4030.h>
 
 /* Commonly used configuration */
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index 058994e..0491076 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -105,9 +105,9 @@
 /*****************************************************************************
  * Ethernet switch
  ****************************************************************************/
-void __init orion5x_eth_switch_init(struct dsa_platform_data *d, int irq)
+void __init orion5x_eth_switch_init(struct dsa_platform_data *d)
 {
-	orion_ge00_switch_init(d, irq);
+	orion_ge00_switch_init(d);
 }
 
 
diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h
index cd0389c..8a4115b 100644
--- a/arch/arm/mach-orion5x/common.h
+++ b/arch/arm/mach-orion5x/common.h
@@ -41,7 +41,7 @@
 void orion5x_ehci0_init(void);
 void orion5x_ehci1_init(void);
 void orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data);
-void orion5x_eth_switch_init(struct dsa_platform_data *d, int irq);
+void orion5x_eth_switch_init(struct dsa_platform_data *d);
 void orion5x_i2c_init(void);
 void orion5x_sata_init(struct mv_sata_platform_data *sata_data);
 void orion5x_spi_init(void);
diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
index c742e7b..dccadf6 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
@@ -101,7 +101,7 @@
 	.port_names[7]	= "lan3",
 };
 
-static struct dsa_platform_data rd88f5181l_fxo_switch_plat_data = {
+static struct dsa_platform_data __initdata rd88f5181l_fxo_switch_plat_data = {
 	.nr_chips	= 1,
 	.chip		= &rd88f5181l_fxo_switch_chip_data,
 };
@@ -120,7 +120,7 @@
 	 */
 	orion5x_ehci0_init();
 	orion5x_eth_init(&rd88f5181l_fxo_eth_data);
-	orion5x_eth_switch_init(&rd88f5181l_fxo_switch_plat_data, NO_IRQ);
+	orion5x_eth_switch_init(&rd88f5181l_fxo_switch_plat_data);
 	orion5x_uart0_init();
 
 	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
index 7e977b7..affe5ec 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
@@ -102,7 +102,7 @@
 	.port_names[7]	= "lan3",
 };
 
-static struct dsa_platform_data rd88f5181l_ge_switch_plat_data = {
+static struct dsa_platform_data __initdata rd88f5181l_ge_switch_plat_data = {
 	.nr_chips	= 1,
 	.chip		= &rd88f5181l_ge_switch_chip_data,
 };
@@ -125,8 +125,7 @@
 	 */
 	orion5x_ehci0_init();
 	orion5x_eth_init(&rd88f5181l_ge_eth_data);
-	orion5x_eth_switch_init(&rd88f5181l_ge_switch_plat_data,
-				gpio_to_irq(8));
+	orion5x_eth_switch_init(&rd88f5181l_ge_switch_plat_data);
 	orion5x_i2c_init();
 	orion5x_uart0_init();
 
diff --git a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
index 4bf80dd..67ee857 100644
--- a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
@@ -40,7 +40,7 @@
 	.port_names[5]	= "cpu",
 };
 
-static struct dsa_platform_data rd88f6183ap_ge_switch_plat_data = {
+static struct dsa_platform_data __initdata rd88f6183ap_ge_switch_plat_data = {
 	.nr_chips	= 1,
 	.chip		= &rd88f6183ap_ge_switch_chip_data,
 };
@@ -71,7 +71,6 @@
 	{
 		.modalias	= "m25p80",
 		.platform_data	= &rd88f6183ap_ge_spi_slave_data,
-		.irq		= NO_IRQ,
 		.max_speed_hz	= 20000000,
 		.bus_num	= 0,
 		.chip_select	= 0,
@@ -90,8 +89,7 @@
 	 */
 	orion5x_ehci0_init();
 	orion5x_eth_init(&rd88f6183ap_ge_eth_data);
-	orion5x_eth_switch_init(&rd88f6183ap_ge_switch_plat_data,
-				gpio_to_irq(3));
+	orion5x_eth_switch_init(&rd88f6183ap_ge_switch_plat_data);
 	spi_register_board_info(rd88f6183ap_ge_spi_slave_info,
 				ARRAY_SIZE(rd88f6183ap_ge_spi_slave_info));
 	orion5x_spi_init();
diff --git a/arch/arm/mach-orion5x/wnr854t-setup.c b/arch/arm/mach-orion5x/wnr854t-setup.c
index 4e1e5c8..4dbcdbe 100644
--- a/arch/arm/mach-orion5x/wnr854t-setup.c
+++ b/arch/arm/mach-orion5x/wnr854t-setup.c
@@ -106,7 +106,7 @@
 	.port_names[7] = "lan2",
 };
 
-static struct dsa_platform_data wnr854t_switch_plat_data = {
+static struct dsa_platform_data __initdata wnr854t_switch_plat_data = {
 	.nr_chips	= 1,
 	.chip		= &wnr854t_switch_chip_data,
 };
@@ -124,7 +124,7 @@
 	 * Configure peripherals.
 	 */
 	orion5x_eth_init(&wnr854t_eth_data);
-	orion5x_eth_switch_init(&wnr854t_switch_plat_data, NO_IRQ);
+	orion5x_eth_switch_init(&wnr854t_switch_plat_data);
 	orion5x_uart0_init();
 
 	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
index 61e9027..a6a8c46 100644
--- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c
+++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
@@ -191,7 +191,7 @@
 	.port_names[7]	= "lan4",
 };
 
-static struct dsa_platform_data wrt350n_v2_switch_plat_data = {
+static struct dsa_platform_data __initdata wrt350n_v2_switch_plat_data = {
 	.nr_chips	= 1,
 	.chip		= &wrt350n_v2_switch_chip_data,
 };
@@ -210,7 +210,7 @@
 	 */
 	orion5x_ehci0_init();
 	orion5x_eth_init(&wrt350n_v2_eth_data);
-	orion5x_eth_switch_init(&wrt350n_v2_switch_plat_data, NO_IRQ);
+	orion5x_eth_switch_init(&wrt350n_v2_switch_plat_data);
 	orion5x_uart0_init();
 
 	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index cd894d6..76fbc11 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -4,6 +4,17 @@
 
 comment "Intel/Marvell Dev Platforms (sorted by hardware release time)"
 
+config MACH_PXA25X_DT
+	bool "Support PXA25x platforms from device tree"
+	select PINCTRL
+	select POWER_SUPPLY
+	select PXA25x
+	select USE_OF
+	help
+	  Include support for Marvell PXA25x based platforms using
+	  the device tree. Needn't select any other machine while
+	  MACH_PXA25x_DT is enabled.
+
 config MACH_PXA27X_DT
 	bool "Support PXA27x platforms from device tree"
 	select PINCTRL
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 2ceed40..ef25dc5 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -19,8 +19,9 @@
 # NOTE: keep the order of boards in accordance to their order in Kconfig
 
 # Device Tree support
-obj-$(CONFIG_MACH_PXA3XX_DT)	+= pxa-dt.o
+obj-$(CONFIG_MACH_PXA25X_DT)	+= pxa-dt.o
 obj-$(CONFIG_MACH_PXA27X_DT)	+= pxa-dt.o
+obj-$(CONFIG_MACH_PXA3XX_DT)	+= pxa-dt.o
 
 # Intel/Marvell Dev Platforms
 obj-$(CONFIG_ARCH_LUBBOCK)	+= lubbock.o
diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c
index d920681..c71c483 100644
--- a/arch/arm/mach-pxa/corgi_pm.c
+++ b/arch/arm/mach-pxa/corgi_pm.c
@@ -131,16 +131,11 @@
 	return is_resume;
 }
 
-static unsigned long corgi_charger_wakeup(void)
+static bool corgi_charger_wakeup(void)
 {
-	unsigned long ret;
-
-	ret = (!gpio_get_value(CORGI_GPIO_AC_IN) << GPIO_bit(CORGI_GPIO_AC_IN))
-		| (!gpio_get_value(CORGI_GPIO_KEY_INT)
-		<< GPIO_bit(CORGI_GPIO_KEY_INT))
-		| (!gpio_get_value(CORGI_GPIO_WAKEUP)
-		<< GPIO_bit(CORGI_GPIO_WAKEUP));
-	return ret;
+	return !gpio_get_value(CORGI_GPIO_AC_IN) ||
+		!gpio_get_value(CORGI_GPIO_KEY_INT) ||
+		!gpio_get_value(CORGI_GPIO_WAKEUP);
 }
 
 unsigned long corgipm_read_devdata(int type)
diff --git a/arch/arm/mach-pxa/devices.h b/arch/arm/mach-pxa/devices.h
index 4a13c32..04580c4 100644
--- a/arch/arm/mach-pxa/devices.h
+++ b/arch/arm/mach-pxa/devices.h
@@ -54,3 +54,4 @@
 extern struct platform_device pxa93x_device_gpio;
 
 void __init pxa_register_device(struct platform_device *dev, void *data);
+void __init pxa2xx_set_dmac_info(int nb_channels, int nb_requestors);
diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h
index 0b1dbb5..75e3f61 100644
--- a/arch/arm/mach-pxa/generic.h
+++ b/arch/arm/mach-pxa/generic.h
@@ -33,14 +33,12 @@
 
 #define pxa27x_handle_irq ichp_handle_irq
 extern int __init pxa27x_clocks_init(void);
-extern void __init pxa27x_dt_init_irq(void);
 extern unsigned	pxa27x_get_clk_frequency_khz(int);
 extern void __init pxa27x_init_irq(void);
 extern void __init pxa27x_map_io(void);
 
 #define pxa3xx_handle_irq ichp_handle_irq
 extern int __init pxa3xx_clocks_init(void);
-extern void __init pxa3xx_dt_init_irq(void);
 extern void __init pxa3xx_init_irq(void);
 extern void __init pxa3xx_map_io(void);
 
diff --git a/arch/arm/mach-pxa/include/mach/dma.h b/arch/arm/mach-pxa/include/mach/dma.h
index 5bd5589..20026bd 100644
--- a/arch/arm/mach-pxa/include/mach/dma.h
+++ b/arch/arm/mach-pxa/include/mach/dma.h
@@ -17,5 +17,4 @@
 /* DMA Controller Registers Definitions */
 #define DMAC_REGS_VIRT	io_p2v(0x40000000)
 
-#include <plat/dma.h>
 #endif /* _ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index 265f48b..b413e36 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -121,10 +121,6 @@
 	GPIO107_GPIO,	/* DS1WM_IRQ */
 	GPIO108_GPIO,	/* GSM_READY */
 	GPIO115_GPIO,	/* nPEN_IRQ */
-
-	/* I2C */
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
 };
 
 /*
diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c
index 388463b..e7450fb 100644
--- a/arch/arm/mach-pxa/pm.c
+++ b/arch/arm/mach-pxa/pm.c
@@ -104,8 +104,9 @@
 		return -EINVAL;
 	}
 
-	sleep_save = kmalloc(pxa_cpu_pm_fns->save_count * sizeof(unsigned long),
-			     GFP_KERNEL);
+	sleep_save = kmalloc_array(pxa_cpu_pm_fns->save_count,
+				   sizeof(*sleep_save),
+				   GFP_KERNEL);
 	if (!sleep_save) {
 		printk(KERN_ERR "failed to alloc memory for pm save\n");
 		return -ENOMEM;
diff --git a/arch/arm/mach-pxa/pxa-dt.c b/arch/arm/mach-pxa/pxa-dt.c
index f128133a..aa9b255 100644
--- a/arch/arm/mach-pxa/pxa-dt.c
+++ b/arch/arm/mach-pxa/pxa-dt.c
@@ -18,6 +18,32 @@
 
 #include "generic.h"
 
+#ifdef CONFIG_PXA25x
+static const char * const pxa25x_dt_board_compat[] __initconst = {
+	"marvell,pxa250",
+	NULL,
+};
+
+DT_MACHINE_START(PXA25X_DT, "Marvell PXA25x (Device Tree Support)")
+	.map_io		= pxa25x_map_io,
+	.restart	= pxa_restart,
+	.dt_compat	= pxa25x_dt_board_compat,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_PXA27x
+static const char * const pxa27x_dt_board_compat[] __initconst = {
+	"marvell,pxa270",
+	NULL,
+};
+
+DT_MACHINE_START(PXA27X_DT, "Marvell PXA27x (Device Tree Support)")
+	.map_io		= pxa27x_map_io,
+	.restart	= pxa_restart,
+	.dt_compat	= pxa27x_dt_board_compat,
+MACHINE_END
+#endif
+
 #ifdef CONFIG_PXA3xx
 static const char *const pxa3xx_dt_board_compat[] __initconst = {
 	"marvell,pxa300",
@@ -28,24 +54,7 @@
 
 DT_MACHINE_START(PXA_DT, "Marvell PXA3xx (Device Tree Support)")
 	.map_io		= pxa3xx_map_io,
-	.init_irq	= pxa3xx_dt_init_irq,
-	.handle_irq	= pxa3xx_handle_irq,
 	.restart	= pxa_restart,
 	.dt_compat	= pxa3xx_dt_board_compat,
 MACHINE_END
 #endif
-
-#ifdef CONFIG_PXA27x
-static const char * const pxa27x_dt_board_compat[] __initconst = {
-	"marvell,pxa270",
-	NULL,
-};
-
-DT_MACHINE_START(PXA27X_DT, "Marvell PXA2xx (Device Tree Support)")
-	.map_io		= pxa27x_map_io,
-	.init_irq	= pxa27x_dt_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.restart	= pxa_restart,
-	.dt_compat	= pxa27x_dt_board_compat,
-MACHINE_END
-#endif
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index 823504f..12b9435 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -25,6 +25,7 @@
 #include <linux/suspend.h>
 #include <linux/syscore_ops.h>
 #include <linux/irq.h>
+#include <linux/irqchip.h>
 
 #include <asm/mach/map.h>
 #include <asm/suspend.h>
@@ -151,6 +152,16 @@
 }
 #endif
 
+static int __init __init
+pxa25x_dt_init_irq(struct device_node *node, struct device_node *parent)
+{
+	pxa_dt_irq_init(pxa25x_set_wake);
+	set_handle_irq(ichp_handle_irq);
+
+	return 0;
+}
+IRQCHIP_DECLARE(pxa25x_intc, "marvell,pxa-intc", pxa25x_dt_init_irq);
+
 static struct map_desc pxa25x_io_desc[] __initdata = {
 	{	/* Mem Ctl */
 		.virtual	= (unsigned long)SMEMC_VIRT,
@@ -198,20 +209,17 @@
 
 		reset_status = RCSR;
 
-		if ((ret = pxa_init_dma(IRQ_DMA, 16)))
-			return ret;
-
 		pxa25x_init_pm();
 
 		register_syscore_ops(&pxa_irq_syscore_ops);
 		register_syscore_ops(&pxa2xx_mfp_syscore_ops);
 
-		pxa2xx_set_dmac_info(16, 40);
-		pxa_register_device(&pxa25x_device_gpio, &pxa25x_gpio_info);
-		ret = platform_add_devices(pxa25x_devices,
-					   ARRAY_SIZE(pxa25x_devices));
-		if (ret)
-			return ret;
+		if (!of_have_populated_dt()) {
+			pxa2xx_set_dmac_info(16, 40);
+			pxa_register_device(&pxa25x_device_gpio, &pxa25x_gpio_info);
+			ret = platform_add_devices(pxa25x_devices,
+						   ARRAY_SIZE(pxa25x_devices));
+		}
 	}
 
 	return ret;
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 2eaa341..c0185c5 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -16,6 +16,7 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/irqchip.h>
 #include <linux/suspend.h>
 #include <linux/platform_device.h>
 #include <linux/syscore_ops.h>
@@ -233,11 +234,15 @@
 	pxa_init_irq(34, pxa27x_set_wake);
 }
 
-void __init pxa27x_dt_init_irq(void)
+static int __init
+pxa27x_dt_init_irq(struct device_node *node, struct device_node *parent)
 {
-	if (IS_ENABLED(CONFIG_OF))
-		pxa_dt_irq_init(pxa27x_set_wake);
+	pxa_dt_irq_init(pxa27x_set_wake);
+	set_handle_irq(ichp_handle_irq);
+
+	return 0;
 }
+IRQCHIP_DECLARE(pxa27x_intc, "marvell,pxa-intc", pxa27x_dt_init_irq);
 
 static struct map_desc pxa27x_io_desc[] __initdata = {
 	{	/* Mem Ctl */
@@ -300,9 +305,6 @@
 
 		reset_status = RCSR;
 
-		if ((ret = pxa_init_dma(IRQ_DMA, 32)))
-			return ret;
-
 		pxa27x_init_pm();
 
 		register_syscore_ops(&pxa_irq_syscore_ops);
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index 3c9184d..87acc96 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -19,6 +19,7 @@
 #include <linux/pm.h>
 #include <linux/platform_device.h>
 #include <linux/irq.h>
+#include <linux/irqchip.h>
 #include <linux/io.h>
 #include <linux/of.h>
 #include <linux/syscore_ops.h>
@@ -356,11 +357,16 @@
 }
 
 #ifdef CONFIG_OF
-void __init pxa3xx_dt_init_irq(void)
+static int __init __init
+pxa3xx_dt_init_irq(struct device_node *node, struct device_node *parent)
 {
 	__pxa3xx_init_irq();
 	pxa_dt_irq_init(pxa3xx_set_wake);
+	set_handle_irq(ichp_handle_irq);
+
+	return 0;
 }
+IRQCHIP_DECLARE(pxa3xx_intc, "marvell,pxa-intc", pxa3xx_dt_init_irq);
 #endif	/* CONFIG_OF */
 
 static struct map_desc pxa3xx_io_desc[] __initdata = {
@@ -438,9 +444,6 @@
 		 */
 		NDCR = (NDCR & ~NDCR_ND_ARB_EN) | NDCR_ND_ARB_CNTL;
 
-		if ((ret = pxa_init_dma(IRQ_DMA, 32)))
-			return ret;
-
 		pxa3xx_init_pm();
 
 		register_syscore_ops(&pxa_irq_syscore_ops);
diff --git a/arch/arm/mach-pxa/pxa_cplds_irqs.c b/arch/arm/mach-pxa/pxa_cplds_irqs.c
index 2385052..e362f86 100644
--- a/arch/arm/mach-pxa/pxa_cplds_irqs.c
+++ b/arch/arm/mach-pxa/pxa_cplds_irqs.c
@@ -41,30 +41,35 @@
 	unsigned long pending;
 	unsigned int bit;
 
-	pending = readl(fpga->base + FPGA_IRQ_SET_CLR) & fpga->irq_mask;
-	for_each_set_bit(bit, &pending, CPLDS_NB_IRQ)
-		generic_handle_irq(irq_find_mapping(fpga->irqdomain, bit));
+	do {
+		pending = readl(fpga->base + FPGA_IRQ_SET_CLR) & fpga->irq_mask;
+		for_each_set_bit(bit, &pending, CPLDS_NB_IRQ) {
+			generic_handle_irq(irq_find_mapping(fpga->irqdomain,
+							    bit));
+		}
+	} while (pending);
 
 	return IRQ_HANDLED;
 }
 
-static void cplds_irq_mask_ack(struct irq_data *d)
+static void cplds_irq_mask(struct irq_data *d)
 {
 	struct cplds *fpga = irq_data_get_irq_chip_data(d);
 	unsigned int cplds_irq = irqd_to_hwirq(d);
-	unsigned int set, bit = BIT(cplds_irq);
+	unsigned int bit = BIT(cplds_irq);
 
 	fpga->irq_mask &= ~bit;
 	writel(fpga->irq_mask, fpga->base + FPGA_IRQ_MASK_EN);
-	set = readl(fpga->base + FPGA_IRQ_SET_CLR);
-	writel(set & ~bit, fpga->base + FPGA_IRQ_SET_CLR);
 }
 
 static void cplds_irq_unmask(struct irq_data *d)
 {
 	struct cplds *fpga = irq_data_get_irq_chip_data(d);
 	unsigned int cplds_irq = irqd_to_hwirq(d);
-	unsigned int bit = BIT(cplds_irq);
+	unsigned int set, bit = BIT(cplds_irq);
+
+	set = readl(fpga->base + FPGA_IRQ_SET_CLR);
+	writel(set & ~bit, fpga->base + FPGA_IRQ_SET_CLR);
 
 	fpga->irq_mask |= bit;
 	writel(fpga->irq_mask, fpga->base + FPGA_IRQ_MASK_EN);
@@ -72,7 +77,8 @@
 
 static struct irq_chip cplds_irq_chip = {
 	.name		= "pxa_cplds",
-	.irq_mask_ack	= cplds_irq_mask_ack,
+	.irq_ack	= cplds_irq_mask,
+	.irq_mask	= cplds_irq_mask,
 	.irq_unmask	= cplds_irq_unmask,
 	.flags		= IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_SKIP_SET_WAKE,
 };
diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
index b80eab9..249b7bd 100644
--- a/arch/arm/mach-pxa/sharpsl_pm.c
+++ b/arch/arm/mach-pxa/sharpsl_pm.c
@@ -744,7 +744,7 @@
 		time = RCNR;
 		while (1) {
 			/* Check if any wakeup event had occurred */
-			if (sharpsl_pm.machinfo->charger_wakeup() != 0)
+			if (sharpsl_pm.machinfo->charger_wakeup())
 				return 0;
 			/* Check for timeout */
 			if ((RCNR - time) > SHARPSL_WAIT_CO_TIME)
diff --git a/arch/arm/mach-pxa/sharpsl_pm.h b/arch/arm/mach-pxa/sharpsl_pm.h
index 905be67..fa75b6d 100644
--- a/arch/arm/mach-pxa/sharpsl_pm.h
+++ b/arch/arm/mach-pxa/sharpsl_pm.h
@@ -34,7 +34,7 @@
 #define SHARPSL_STATUS_LOCK     5
 #define SHARPSL_STATUS_CHRGFULL 6
 #define SHARPSL_STATUS_FATAL    7
-	unsigned long (*charger_wakeup)(void);
+	bool (*charger_wakeup)(void);
 	int (*should_wakeup)(unsigned int resume_on_alarm);
 	void (*backlight_limit)(int);
 	int (*backlight_get_status) (void);
diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c
index ea9f903..4e64a14 100644
--- a/arch/arm/mach-pxa/spitz_pm.c
+++ b/arch/arm/mach-pxa/spitz_pm.c
@@ -165,13 +165,10 @@
 	return is_resume;
 }
 
-static unsigned long spitz_charger_wakeup(void)
+static bool spitz_charger_wakeup(void)
 {
-	unsigned long ret;
-	ret = ((!gpio_get_value(SPITZ_GPIO_KEY_INT)
-		<< GPIO_bit(SPITZ_GPIO_KEY_INT))
-		| gpio_get_value(SPITZ_GPIO_SYNC));
-	return ret;
+	return !gpio_get_value(SPITZ_GPIO_KEY_INT) ||
+		gpio_get_value(SPITZ_GPIO_SYNC);
 }
 
 unsigned long spitzpm_read_devdata(int type)
diff --git a/arch/arm/mach-qcom/Makefile b/arch/arm/mach-qcom/Makefile
index e324375..12878e9 100644
--- a/arch/arm/mach-qcom/Makefile
+++ b/arch/arm/mach-qcom/Makefile
@@ -1,2 +1 @@
-obj-y			:= board.o
 obj-$(CONFIG_SMP)	+= platsmp.o
diff --git a/arch/arm/mach-qcom/board.c b/arch/arm/mach-qcom/board.c
deleted file mode 100644
index d8060df..0000000
--- a/arch/arm/mach-qcom/board.c
+++ /dev/null
@@ -1,31 +0,0 @@
-/* Copyright (c) 2010-2014 The Linux Foundation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/init.h>
-
-#include <asm/mach/arch.h>
-
-static const char * const qcom_dt_match[] __initconst = {
-	"qcom,apq8064",
-	"qcom,apq8074-dragonboard",
-	"qcom,apq8084",
-	"qcom,ipq8062",
-	"qcom,ipq8064",
-	"qcom,msm8660-surf",
-	"qcom,msm8960-cdp",
-	"qcom,mdm9615",
-	NULL
-};
-
-DT_MACHINE_START(QCOM_DT, "Qualcomm (Flattened Device Tree)")
-	.dt_compat = qcom_dt_match,
-MACHINE_END
diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig
index 70ab4a2..1d7c83e 100644
--- a/arch/arm/mach-realview/Kconfig
+++ b/arch/arm/mach-realview/Kconfig
@@ -2,35 +2,30 @@
 	bool "ARM Ltd. RealView family"
 	depends on ARCH_MULTI_V5 || ARCH_MULTI_V6 || ARCH_MULTI_V7
 	select ARM_AMBA
+	select ARM_GIC
 	select ARM_TIMER_SP804
+	select CLK_SP810
 	select COMMON_CLK_VERSATILE
 	select GPIO_PL061 if GPIOLIB
+	select HAVE_ARM_SCU if SMP
+	select HAVE_ARM_TWD if SMP
+	select HAVE_PATA_PLATFORM
+	select HAVE_TCM
 	select ICST
+	select MACH_REALVIEW_EB if ARCH_MULTI_V5
+	select MFD_SYSCON
 	select PLAT_VERSATILE
 	select PLAT_VERSATILE_SCHED_CLOCK
+	select POWER_RESET
+	select POWER_RESET_VERSATILE
+	select POWER_SUPPLY
+	select SOC_REALVIEW
+	select USE_OF
 	help
 	  This enables support for ARM Ltd RealView boards.
 
 if ARCH_REALVIEW
 
-config REALVIEW_DT
-	bool "Support RealView(R) Device Tree based boot"
-	select ARM_GIC
-	select CLK_SP810
-	select HAVE_SMP
-	select ICST
-	select MACH_REALVIEW_EB if ARCH_MULTI_V5
-	select MFD_SYSCON
-	select POWER_RESET
-	select POWER_RESET_VERSATILE
-	select POWER_SUPPLY
-	select SMP_ON_UP if SMP
-	select SOC_REALVIEW
-	select USE_OF
-	help
-	  Include support for booting the ARM(R) RealView(R) evaluation
-	  boards using a device tree machine description.
-
 config MACH_REALVIEW_EB
 	bool "Support RealView(R) Emulation Baseboard"
 	select ARM_GIC
@@ -60,8 +55,6 @@
 config REALVIEW_EB_A9MP
 	bool "Support Multicore Cortex-A9 Tile"
 	depends on MACH_REALVIEW_EB && ARCH_MULTI_V7
-	select HAVE_ARM_SCU if SMP
-	select HAVE_ARM_TWD if SMP
 	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
 	help
@@ -71,30 +64,15 @@
 config REALVIEW_EB_ARM11MP
 	bool "Support ARM11MPCore Tile"
 	depends on MACH_REALVIEW_EB && ARCH_MULTI_V6
-	select HAVE_ARM_SCU if SMP
-	select HAVE_ARM_TWD if SMP
 	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
 	help
 	  Enable support for the ARM11MPCore tile fitted to the Realview(R)
 	  Emulation Baseboard platform.
 
-config REALVIEW_EB_ARM11MP_REVB
-	bool "Support ARM11MPCore RevB Tile"
-	depends on REALVIEW_EB_ARM11MP && ARCH_MULTI_V6
-	help
-	  Enable support for the ARM11MPCore Revision B tile on the
-	  Realview(R) Emulation Baseboard platform. Since there are device
-	  address differences, a kernel built with this option enabled is
-	  not compatible with other revisions of the ARM11MPCore tile.
-
 config MACH_REALVIEW_PB11MP
 	bool "Support RealView(R) Platform Baseboard for ARM11MPCore"
 	depends on ARCH_MULTI_V6
-	select ARM_GIC
-	select HAVE_ARM_SCU if SMP
-	select HAVE_ARM_TWD if SMP
-	select HAVE_PATA_PLATFORM
 	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
 	help
@@ -106,7 +84,6 @@
 config MACH_REALVIEW_PB1176
 	bool "Support RealView(R) Platform Baseboard for ARM1176JZF-S"
 	depends on ARCH_MULTI_V6
-	select ARM_GIC
 	select CPU_V6
 	select HAVE_TCM
 	select MIGHT_HAVE_CACHE_L2X0
@@ -114,20 +91,9 @@
 	  Include support for the ARM(R) RealView(R) Platform Baseboard for
 	  ARM1176JZF-S.
 
-config REALVIEW_PB1176_SECURE_FLASH
-	bool "Allow access to the secure flash memory block"
-	depends on MACH_REALVIEW_PB1176
-	default n
-	help
-	  Select this option if Linux will only run in secure mode on the
-	  RealView PB1176 platform and access to the secure flash memory
-	  block (64MB @ 0x3c000000) is required.
-
 config MACH_REALVIEW_PBA8
 	bool "Support RealView(R) Platform Baseboard for Cortex(tm)-A8 platform"
 	depends on ARCH_MULTI_V7
-	select ARM_GIC
-	select HAVE_PATA_PLATFORM
 	help
 	  Include support for the ARM(R) RealView Platform Baseboard for
 	  Cortex(tm)-A8.  This platform has an on-board Cortex-A8 and has
@@ -136,10 +102,6 @@
 config MACH_REALVIEW_PBX
 	bool "Support RealView(R) Platform Baseboard Explore for Cortex-A9"
 	depends on ARCH_MULTI_V7
-	select ARM_GIC
-	select HAVE_ARM_SCU if SMP
-	select HAVE_ARM_TWD if SMP
-	select HAVE_PATA_PLATFORM
 	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
 	select ZONE_DMA
@@ -147,16 +109,4 @@
 	  Include support for the ARM(R) RealView(R) Platform Baseboard
 	  Explore.
 
-config REALVIEW_HIGH_PHYS_OFFSET
-	bool "High physical base address for the RealView platform"
-	depends on MMU && !MACH_REALVIEW_PB1176
-	default y
-	help
-	  RealView boards other than PB1176 have the RAM available at
-	  0x70000000, 256MB of which being mirrored at 0x00000000. If
-	  the board supports 512MB of RAM, this option allows the
-	  memory to be accessed contiguously at the high physical
-	  offset. On the PBX board, disabling this option allows 1GB of
-	  RAM to be used with HIGHMEM.
-
 endif
diff --git a/arch/arm/mach-realview/Makefile b/arch/arm/mach-realview/Makefile
index 4048821..adf39ad 100644
--- a/arch/arm/mach-realview/Makefile
+++ b/arch/arm/mach-realview/Makefile
@@ -3,16 +3,6 @@
 #
 ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/plat-versatile/include
 
-obj-y					:= core.o
-obj-$(CONFIG_REALVIEW_DT)		+= realview-dt.o
+obj-y					+= realview-dt.o
 obj-$(CONFIG_SMP)			+= platsmp-dt.o
-
-ifdef CONFIG_ATAGS
-obj-$(CONFIG_MACH_REALVIEW_EB)		+= realview_eb.o
-obj-$(CONFIG_MACH_REALVIEW_PB11MP)	+= realview_pb11mp.o
-obj-$(CONFIG_MACH_REALVIEW_PB1176)	+= realview_pb1176.o
-obj-$(CONFIG_MACH_REALVIEW_PBA8)	+= realview_pba8.o
-obj-$(CONFIG_MACH_REALVIEW_PBX)		+= realview_pbx.o
-obj-$(CONFIG_SMP)			+= platsmp.o
-endif
 obj-$(CONFIG_HOTPLUG_CPU)		+= hotplug.o
diff --git a/arch/arm/mach-realview/board-eb.h b/arch/arm/mach-realview/board-eb.h
deleted file mode 100644
index a850ae6..0000000
--- a/arch/arm/mach-realview/board-eb.h
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * Copyright (C) 2007 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __ASM_ARCH_BOARD_EB_H
-#define __ASM_ARCH_BOARD_EB_H
-
-#include "platform.h"
-
-/*
- * RealView EB + ARM11MPCore peripheral addresses
- */
-#define REALVIEW_EB_UART0_BASE		0x10009000	/* UART 0 */
-#define REALVIEW_EB_UART1_BASE		0x1000A000	/* UART 1 */
-#define REALVIEW_EB_UART2_BASE		0x1000B000	/* UART 2 */
-#define REALVIEW_EB_UART3_BASE		0x1000C000	/* UART 3 */
-#define REALVIEW_EB_SSP_BASE		0x1000D000	/* Synchronous Serial Port */
-#define REALVIEW_EB_WATCHDOG_BASE	0x10010000	/* watchdog interface */
-#define REALVIEW_EB_TIMER0_1_BASE	0x10011000	/* Timer 0 and 1 */
-#define REALVIEW_EB_TIMER2_3_BASE	0x10012000	/* Timer 2 and 3 */
-#define REALVIEW_EB_GPIO0_BASE		0x10013000	/* GPIO port 0 */
-#define REALVIEW_EB_RTC_BASE		0x10017000	/* Real Time Clock */
-#define REALVIEW_EB_CLCD_BASE		0x10020000	/* CLCD */
-#define REALVIEW_EB_GIC_CPU_BASE	0x10040000	/* Generic interrupt controller CPU interface */
-#define REALVIEW_EB_GIC_DIST_BASE	0x10041000	/* Generic interrupt controller distributor */
-#define REALVIEW_EB_SMC_BASE		0x10080000	/* Static memory controller */
-
-#define REALVIEW_EB_FLASH_BASE		0x40000000
-#define REALVIEW_EB_FLASH_SIZE		SZ_64M
-#define REALVIEW_EB_ETH_BASE		0x4E000000	/* Ethernet */
-#define REALVIEW_EB_USB_BASE		0x4F000000	/* USB */
-
-#ifdef CONFIG_REALVIEW_EB_ARM11MP_REVB
-#define REALVIEW_EB11MP_PRIV_MEM_BASE	0x10100000
-#define REALVIEW_EB11MP_L220_BASE	0x10102000	/* L220 registers */
-#define REALVIEW_EB11MP_SYS_PLD_CTRL1	0xD8		/* Register offset for MPCore sysctl */
-#else
-#define REALVIEW_EB11MP_PRIV_MEM_BASE	0x1F000000
-#define REALVIEW_EB11MP_L220_BASE	0x1F002000	/* L220 registers */
-#define REALVIEW_EB11MP_SYS_PLD_CTRL1	0x74		/* Register offset for MPCore sysctl */
-#endif
-
-#define REALVIEW_EB11MP_PRIV_MEM_SIZE	SZ_8K
-#define REALVIEW_EB11MP_PRIV_MEM_OFF(x)	(REALVIEW_EB11MP_PRIV_MEM_BASE + (x))
-
-#define REALVIEW_EB11MP_SCU_BASE	REALVIEW_EB11MP_PRIV_MEM_OFF(0)		/* SCU registers */
-#define REALVIEW_EB11MP_GIC_CPU_BASE	REALVIEW_EB11MP_PRIV_MEM_OFF(0x0100)	/* Generic interrupt controller CPU interface */
-#define REALVIEW_EB11MP_TWD_BASE	REALVIEW_EB11MP_PRIV_MEM_OFF(0x0600)
-#define REALVIEW_EB11MP_GIC_DIST_BASE	REALVIEW_EB11MP_PRIV_MEM_OFF(0x1000)	/* Generic interrupt controller distributor */
-
-/*
- * Core tile identification (REALVIEW_SYS_PROCID)
- */
-#define REALVIEW_EB_PROC_MASK		0xFF000000
-#define REALVIEW_EB_PROC_ARM7TDMI	0x00000000
-#define REALVIEW_EB_PROC_ARM9		0x02000000
-#define REALVIEW_EB_PROC_ARM11		0x04000000
-#define REALVIEW_EB_PROC_ARM11MP	0x06000000
-#define REALVIEW_EB_PROC_A9MP		0x0C000000
-
-#define check_eb_proc(proc_type)						\
-	((readl(__io_address(REALVIEW_SYS_PROCID)) & REALVIEW_EB_PROC_MASK)	\
-	 == proc_type)
-
-#ifdef CONFIG_REALVIEW_EB_ARM11MP
-#define core_tile_eb11mp()	check_eb_proc(REALVIEW_EB_PROC_ARM11MP)
-#else
-#define core_tile_eb11mp()	0
-#endif
-
-#ifdef CONFIG_REALVIEW_EB_A9MP
-#define core_tile_a9mp()	check_eb_proc(REALVIEW_EB_PROC_A9MP)
-#else
-#define core_tile_a9mp()	0
-#endif
-
-#define machine_is_realview_eb_mp() \
-	(machine_is_realview_eb() && (core_tile_eb11mp() || core_tile_a9mp()))
-
-#endif	/* __ASM_ARCH_BOARD_EB_H */
diff --git a/arch/arm/mach-realview/board-pb1176.h b/arch/arm/mach-realview/board-pb1176.h
deleted file mode 100644
index 29c04a9..0000000
--- a/arch/arm/mach-realview/board-pb1176.h
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * Copyright (C) 2008 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __ASM_ARCH_BOARD_PB1176_H
-#define __ASM_ARCH_BOARD_PB1176_H
-
-#include "platform.h"
-
-/*
- * Peripheral addresses
- */
-#define REALVIEW_PB1176_UART4_BASE		0x10009000 /* UART 4 */
-#define REALVIEW_PB1176_SCTL_BASE		0x10100000 /* System controller */
-#define REALVIEW_PB1176_SMC_BASE		0x10111000 /* SMC */
-#define REALVIEW_PB1176_DMC_BASE		0x10109000 /* DMC configuration */
-#define REALVIEW_PB1176_SDRAM67_BASE		0x70000000 /* SDRAM banks 6 and 7 */
-#define REALVIEW_PB1176_FLASH_BASE		0x30000000
-#define REALVIEW_PB1176_FLASH_SIZE		SZ_64M
-#define REALVIEW_PB1176_SEC_FLASH_BASE		0x3C000000 /* Secure flash */
-#define REALVIEW_PB1176_SEC_FLASH_SIZE		SZ_64M
-
-#define REALVIEW_PB1176_TIMER0_1_BASE		0x10104000 /* Timer 0 and 1 */
-#define REALVIEW_PB1176_TIMER2_3_BASE		0x10105000 /* Timer 2 and 3 */
-#define REALVIEW_PB1176_TIMER4_5_BASE		0x10106000 /* Timer 4 and 5 */
-#define REALVIEW_PB1176_WATCHDOG_BASE		0x10107000 /* watchdog interface */
-#define REALVIEW_PB1176_RTC_BASE		0x10108000 /* Real Time Clock */
-#define REALVIEW_PB1176_GPIO0_BASE		0x1010A000 /* GPIO port 0 */
-#define REALVIEW_PB1176_SSP_BASE		0x1010B000 /* Synchronous Serial Port */
-#define REALVIEW_PB1176_UART0_BASE		0x1010C000 /* UART 0 */
-#define REALVIEW_PB1176_UART1_BASE		0x1010D000 /* UART 1 */
-#define REALVIEW_PB1176_UART2_BASE		0x1010E000 /* UART 2 */
-#define REALVIEW_PB1176_UART3_BASE		0x1010F000 /* UART 3 */
-#define REALVIEW_PB1176_CLCD_BASE		0x10112000 /* CLCD */
-#define REALVIEW_PB1176_ETH_BASE		0x3A000000 /* Ethernet */
-#define REALVIEW_PB1176_USB_BASE		0x3B000000 /* USB */
-
-/*
- * PCI regions
- */
-#define REALVIEW_PB1176_PCI_BASE		0x60000000 /* PCI self config */
-#define REALVIEW_PB1176_PCI_CFG_BASE		0x61000000 /* PCI config */
-#define REALVIEW_PB1176_PCI_IO_BASE0		0x62000000 /* PCI IO region */
-#define REALVIEW_PB1176_PCI_MEM_BASE0		0x63000000 /* Memory region 1 */
-#define REALVIEW_PB1176_PCI_MEM_BASE1		0x64000000 /* Memory region 2 */
-#define REALVIEW_PB1176_PCI_MEM_BASE2		0x68000000 /* Memory region 3 */
-
-#define REALVIEW_PB1176_PCI_BASE_SIZE		0x01000000 /* 16MB */
-#define REALVIEW_PB1176_PCI_CFG_BASE_SIZE	0x01000000 /* 16MB */
-#define REALVIEW_PB1176_PCI_IO_BASE0_SIZE	0x01000000 /* 16MB */
-#define REALVIEW_PB1176_PCI_MEM_BASE0_SIZE	0x01000000 /* 16MB */
-#define REALVIEW_PB1176_PCI_MEM_BASE1_SIZE	0x04000000 /* 64MB */
-#define REALVIEW_PB1176_PCI_MEM_BASE2_SIZE	0x08000000 /* 128MB */
-
-#define REALVIEW_DC1176_GIC_CPU_BASE		0x10120000 /* GIC CPU interface, on devchip */
-#define REALVIEW_DC1176_GIC_DIST_BASE		0x10121000 /* GIC distributor, on devchip */
-#define REALVIEW_DC1176_ROM_BASE		0x10200000 /* 16KiB NRAM preudo-ROM, on devchip */
-#define REALVIEW_PB1176_GIC_CPU_BASE		0x10040000 /* GIC CPU interface, on FPGA */
-#define REALVIEW_PB1176_GIC_DIST_BASE		0x10041000 /* GIC distributor, on FPGA */
-#define REALVIEW_PB1176_L220_BASE		0x10110000 /* L220 registers */
-
-/*
- * Control register SYS_RESETCTL Bit 8 is set to 1 to force a soft reset
- */
-#define REALVIEW_PB1176_SYS_SOFT_RESET    0x0100
-
-#endif	/* __ASM_ARCH_BOARD_PB1176_H */
diff --git a/arch/arm/mach-realview/board-pb11mp.h b/arch/arm/mach-realview/board-pb11mp.h
deleted file mode 100644
index b16e6e85..0000000
--- a/arch/arm/mach-realview/board-pb11mp.h
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * Copyright (C) 2008 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __ASM_ARCH_BOARD_PB11MP_H
-#define __ASM_ARCH_BOARD_PB11MP_H
-
-#include "platform.h"
-
-/*
- * Peripheral addresses
- */
-#define REALVIEW_PB11MP_UART0_BASE		0x10009000	/* UART 0 */
-#define REALVIEW_PB11MP_UART1_BASE		0x1000A000	/* UART 1 */
-#define REALVIEW_PB11MP_UART2_BASE		0x1000B000	/* UART 2 */
-#define REALVIEW_PB11MP_UART3_BASE		0x1000C000	/* UART 3 */
-#define REALVIEW_PB11MP_SSP_BASE		0x1000D000	/* Synchronous Serial Port */
-#define REALVIEW_PB11MP_WATCHDOG0_BASE		0x1000F000	/* Watchdog 0 */
-#define REALVIEW_PB11MP_WATCHDOG_BASE		0x10010000	/* watchdog interface */
-#define REALVIEW_PB11MP_TIMER0_1_BASE		0x10011000	/* Timer 0 and 1 */
-#define REALVIEW_PB11MP_TIMER2_3_BASE		0x10012000	/* Timer 2 and 3 */
-#define REALVIEW_PB11MP_GPIO0_BASE		0x10013000	/* GPIO port 0 */
-#define REALVIEW_PB11MP_RTC_BASE		0x10017000	/* Real Time Clock */
-#define REALVIEW_PB11MP_TIMER4_5_BASE		0x10018000	/* Timer 4/5 */
-#define REALVIEW_PB11MP_TIMER6_7_BASE		0x10019000	/* Timer 6/7 */
-#define REALVIEW_PB11MP_SCTL_BASE		0x1001A000	/* System Controller */
-#define REALVIEW_PB11MP_CLCD_BASE		0x10020000	/* CLCD */
-#define REALVIEW_PB11MP_ONB_SRAM_BASE		0x10060000	/* On-board SRAM */
-#define REALVIEW_PB11MP_DMC_BASE		0x100E0000	/* DMC configuration */
-#define REALVIEW_PB11MP_SMC_BASE		0x100E1000	/* SMC configuration */
-#define REALVIEW_PB11MP_CAN_BASE		0x100E2000	/* CAN bus */
-#define REALVIEW_PB11MP_CF_BASE			0x18000000	/* Compact flash */
-#define REALVIEW_PB11MP_CF_MEM_BASE		0x18003000	/* SMC for Compact flash */
-#define REALVIEW_PB11MP_GIC_CPU_BASE		0x1E000000	/* Generic interrupt controller CPU interface */
-#define REALVIEW_PB11MP_FLASH0_BASE		0x40000000
-#define REALVIEW_PB11MP_FLASH0_SIZE		SZ_64M
-#define REALVIEW_PB11MP_FLASH1_BASE		0x44000000
-#define REALVIEW_PB11MP_FLASH1_SIZE		SZ_64M
-#define REALVIEW_PB11MP_ETH_BASE		0x4E000000	/* Ethernet */
-#define REALVIEW_PB11MP_USB_BASE		0x4F000000	/* USB */
-#define REALVIEW_PB11MP_GIC_DIST_BASE		0x1E001000	/* Generic interrupt controller distributor */
-#define REALVIEW_PB11MP_LT_BASE			0xC0000000	/* Logic Tile expansion */
-#define REALVIEW_PB11MP_SDRAM6_BASE		0x70000000	/* SDRAM bank 6 256MB */
-#define REALVIEW_PB11MP_SDRAM7_BASE		0x80000000	/* SDRAM bank 7 256MB */
-
-#define REALVIEW_PB11MP_SYS_PLD_CTRL1		0x74
-
-/*
- * PB11MPCore PCI regions
- */
-#define REALVIEW_PB11MP_PCI_BASE		0x90040000	/* PCI-X Unit base */
-#define REALVIEW_PB11MP_PCI_IO_BASE		0x90050000	/* IO Region on AHB */
-#define REALVIEW_PB11MP_PCI_MEM_BASE		0xA0000000	/* MEM Region on AHB */
-
-#define REALVIEW_PB11MP_PCI_BASE_SIZE		0x10000		/* 16 Kb */
-#define REALVIEW_PB11MP_PCI_IO_SIZE		0x1000		/* 4 Kb */
-#define REALVIEW_PB11MP_PCI_MEM_SIZE		0x20000000	/* 512 MB */
-
-/*
- * Testchip peripheral and fpga gic regions
- */
-#define REALVIEW_TC11MP_PRIV_MEM_BASE		0x1F000000
-#define REALVIEW_TC11MP_PRIV_MEM_SIZE		SZ_8K
-#define REALVIEW_TC11MP_SCU_BASE		0x1F000000	/* IRQ, Test chip */
-#define REALVIEW_TC11MP_GIC_CPU_BASE		0x1F000100	/* Test chip interrupt controller CPU interface */
-#define REALVIEW_TC11MP_TWD_BASE		0x1F000600
-#define REALVIEW_TC11MP_GIC_DIST_BASE		0x1F001000	/* Test chip interrupt controller distributor */
-#define REALVIEW_TC11MP_L220_BASE		0x1F002000	/* L220 registers */
-
- /*
- * Values for REALVIEW_SYS_RESET_CTRL
- */
-#define REALVIEW_PB11MP_SYS_CTRL_RESET_CONFIGCLR    0x01
-#define REALVIEW_PB11MP_SYS_CTRL_RESET_CONFIGINIT   0x02
-#define REALVIEW_PB11MP_SYS_CTRL_RESET_DLLRESET     0x03
-#define REALVIEW_PB11MP_SYS_CTRL_RESET_PLLRESET     0x04
-#define REALVIEW_PB11MP_SYS_CTRL_RESET_POR          0x05
-#define REALVIEW_PB11MP_SYS_CTRL_RESET_DoC          0x06
-
-#define REALVIEW_PB11MP_SYS_CTRL_LED         (1 << 0)
-
-#endif	/* __ASM_ARCH_BOARD_PB11MP_H */
diff --git a/arch/arm/mach-realview/board-pba8.h b/arch/arm/mach-realview/board-pba8.h
deleted file mode 100644
index 6a1391f..0000000
--- a/arch/arm/mach-realview/board-pba8.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * Copyright (C) 2008 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __ASM_ARCH_BOARD_PBA8_H
-#define __ASM_ARCH_BOARD_PBA8_H
-
-#include "platform.h"
-
-/*
- * Peripheral addresses
- */
-#define REALVIEW_PBA8_UART0_BASE		0x10009000	/* UART 0 */
-#define REALVIEW_PBA8_UART1_BASE		0x1000A000	/* UART 1 */
-#define REALVIEW_PBA8_UART2_BASE		0x1000B000	/* UART 2 */
-#define REALVIEW_PBA8_UART3_BASE		0x1000C000	/* UART 3 */
-#define REALVIEW_PBA8_SSP_BASE			0x1000D000	/* Synchronous Serial Port */
-#define REALVIEW_PBA8_WATCHDOG0_BASE		0x1000F000	/* Watchdog 0 */
-#define REALVIEW_PBA8_WATCHDOG_BASE		0x10010000	/* watchdog interface */
-#define REALVIEW_PBA8_TIMER0_1_BASE		0x10011000	/* Timer 0 and 1 */
-#define REALVIEW_PBA8_TIMER2_3_BASE		0x10012000	/* Timer 2 and 3 */
-#define REALVIEW_PBA8_GPIO0_BASE		0x10013000	/* GPIO port 0 */
-#define REALVIEW_PBA8_RTC_BASE			0x10017000	/* Real Time Clock */
-#define REALVIEW_PBA8_TIMER4_5_BASE		0x10018000	/* Timer 4/5 */
-#define REALVIEW_PBA8_TIMER6_7_BASE		0x10019000	/* Timer 6/7 */
-#define REALVIEW_PBA8_SCTL_BASE			0x1001A000	/* System Controller */
-#define REALVIEW_PBA8_CLCD_BASE			0x10020000	/* CLCD */
-#define REALVIEW_PBA8_ONB_SRAM_BASE		0x10060000	/* On-board SRAM */
-#define REALVIEW_PBA8_DMC_BASE			0x100E0000	/* DMC configuration */
-#define REALVIEW_PBA8_SMC_BASE			0x100E1000	/* SMC configuration */
-#define REALVIEW_PBA8_CAN_BASE			0x100E2000	/* CAN bus */
-#define REALVIEW_PBA8_GIC_CPU_BASE		0x1E000000	/* Generic interrupt controller CPU interface */
-#define REALVIEW_PBA8_FLASH0_BASE		0x40000000
-#define REALVIEW_PBA8_FLASH0_SIZE		SZ_64M
-#define REALVIEW_PBA8_FLASH1_BASE		0x44000000
-#define REALVIEW_PBA8_FLASH1_SIZE		SZ_64M
-#define REALVIEW_PBA8_ETH_BASE			0x4E000000	/* Ethernet */
-#define REALVIEW_PBA8_USB_BASE			0x4F000000	/* USB */
-#define REALVIEW_PBA8_GIC_DIST_BASE		0x1E001000	/* Generic interrupt controller distributor */
-#define REALVIEW_PBA8_LT_BASE			0xC0000000	/* Logic Tile expansion */
-#define REALVIEW_PBA8_SDRAM6_BASE		0x70000000	/* SDRAM bank 6 256MB */
-#define REALVIEW_PBA8_SDRAM7_BASE		0x80000000	/* SDRAM bank 7 256MB */
-
-#define REALVIEW_PBA8_SYS_PLD_CTRL1		0x74
-
-/*
- * PBA8 PCI regions
- */
-#define REALVIEW_PBA8_PCI_BASE			0x90040000	/* PCI-X Unit base */
-#define REALVIEW_PBA8_PCI_IO_BASE		0x90050000	/* IO Region on AHB */
-#define REALVIEW_PBA8_PCI_MEM_BASE		0xA0000000	/* MEM Region on AHB */
-
-#define REALVIEW_PBA8_PCI_BASE_SIZE		0x10000		/* 16 Kb */
-#define REALVIEW_PBA8_PCI_IO_SIZE		0x1000		/* 4 Kb */
-#define REALVIEW_PBA8_PCI_MEM_SIZE		0x20000000	/* 512 MB */
-
-#endif	/* __ASM_ARCH_BOARD_PBA8_H */
diff --git a/arch/arm/mach-realview/board-pbx.h b/arch/arm/mach-realview/board-pbx.h
deleted file mode 100644
index 5cda480..0000000
--- a/arch/arm/mach-realview/board-pbx.h
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
- * Copyright (C) 2009 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __ASM_ARCH_BOARD_PBX_H
-#define __ASM_ARCH_BOARD_PBX_H
-
-#include "platform.h"
-
-/*
- * Peripheral addresses
- */
-#define REALVIEW_PBX_UART0_BASE			0x10009000	/* UART 0 */
-#define REALVIEW_PBX_UART1_BASE			0x1000A000	/* UART 1 */
-#define REALVIEW_PBX_UART2_BASE			0x1000B000	/* UART 2 */
-#define REALVIEW_PBX_UART3_BASE			0x1000C000	/* UART 3 */
-#define REALVIEW_PBX_SSP_BASE			0x1000D000	/* Synchronous Serial Port */
-#define REALVIEW_PBX_WATCHDOG0_BASE		0x1000F000	/* Watchdog 0 */
-#define REALVIEW_PBX_WATCHDOG_BASE		0x10010000	/* watchdog interface */
-#define REALVIEW_PBX_TIMER0_1_BASE		0x10011000	/* Timer 0 and 1 */
-#define REALVIEW_PBX_TIMER2_3_BASE		0x10012000	/* Timer 2 and 3 */
-#define REALVIEW_PBX_GPIO0_BASE			0x10013000	/* GPIO port 0 */
-#define REALVIEW_PBX_RTC_BASE			0x10017000	/* Real Time Clock */
-#define REALVIEW_PBX_TIMER4_5_BASE		0x10018000	/* Timer 4/5 */
-#define REALVIEW_PBX_TIMER6_7_BASE		0x10019000	/* Timer 6/7 */
-#define REALVIEW_PBX_SCTL_BASE			0x1001A000	/* System Controller */
-#define REALVIEW_PBX_CLCD_BASE			0x10020000	/* CLCD */
-#define REALVIEW_PBX_ONB_SRAM_BASE		0x10060000	/* On-board SRAM */
-#define REALVIEW_PBX_DMC_BASE			0x100E0000	/* DMC configuration */
-#define REALVIEW_PBX_SMC_BASE			0x100E1000	/* SMC configuration */
-#define REALVIEW_PBX_CAN_BASE			0x100E2000	/* CAN bus */
-#define REALVIEW_PBX_GIC_CPU_BASE		0x1E000000	/* Generic interrupt controller CPU interface */
-#define REALVIEW_PBX_FLASH0_BASE		0x40000000
-#define REALVIEW_PBX_FLASH0_SIZE		SZ_64M
-#define REALVIEW_PBX_FLASH1_BASE		0x44000000
-#define REALVIEW_PBX_FLASH1_SIZE		SZ_64M
-#define REALVIEW_PBX_ETH_BASE			0x4E000000	/* Ethernet */
-#define REALVIEW_PBX_USB_BASE			0x4F000000	/* USB */
-#define REALVIEW_PBX_GIC_DIST_BASE		0x1E001000	/* Generic interrupt controller distributor */
-#define REALVIEW_PBX_LT_BASE			0xC0000000	/* Logic Tile expansion */
-#define REALVIEW_PBX_SDRAM6_BASE		0x70000000	/* SDRAM bank 6 256MB */
-#define REALVIEW_PBX_SDRAM7_BASE		0x80000000	/* SDRAM bank 7 256MB */
-
-/*
- * Tile-specific addresses
- */
-#define REALVIEW_PBX_TILE_SCU_BASE		0x1F000000      /* SCU registers */
-#define REALVIEW_PBX_TILE_GIC_CPU_BASE		0x1F000100      /* Private Generic interrupt controller CPU interface */
-#define REALVIEW_PBX_TILE_TWD_BASE		0x1F000600
-#define REALVIEW_PBX_TILE_TWD_PERCPU_BASE	0x1F000700
-#define REALVIEW_PBX_TILE_TWD_SIZE		0x00000100
-#define REALVIEW_PBX_TILE_GIC_DIST_BASE		0x1F001000      /* Private Generic interrupt controller distributor */
-#define REALVIEW_PBX_TILE_L220_BASE		0x1F002000      /* L220 registers */
-
-#define REALVIEW_PBX_SYS_PLD_CTRL1		0x74
-
-/*
- * PBX PCI regions
- */
-#define REALVIEW_PBX_PCI_BASE			0x90040000	/* PCI-X Unit base */
-#define REALVIEW_PBX_PCI_IO_BASE		0x90050000	/* IO Region on AHB */
-#define REALVIEW_PBX_PCI_MEM_BASE		0xA0000000	/* MEM Region on AHB */
-
-#define REALVIEW_PBX_PCI_BASE_SIZE		0x10000		/* 16 Kb */
-#define REALVIEW_PBX_PCI_IO_SIZE		0x1000		/* 4 Kb */
-#define REALVIEW_PBX_PCI_MEM_SIZE		0x20000000	/* 512 MB */
-
-/*
- * Core tile identification (REALVIEW_SYS_PROCID)
- */
-#define REALVIEW_PBX_PROC_MASK          0xFF000000
-#define REALVIEW_PBX_PROC_ARM7TDMI      0x00000000
-#define REALVIEW_PBX_PROC_ARM9          0x02000000
-#define REALVIEW_PBX_PROC_ARM11         0x04000000
-#define REALVIEW_PBX_PROC_ARM11MP       0x06000000
-#define REALVIEW_PBX_PROC_A9MP          0x0C000000
-#define REALVIEW_PBX_PROC_A8            0x0E000000
-
-#define check_pbx_proc(proc_type)                                            \
-	((readl(__io_address(REALVIEW_SYS_PROCID)) & REALVIEW_PBX_PROC_MASK) \
-	== proc_type)
-
-#ifdef CONFIG_MACH_REALVIEW_PBX
-#define core_tile_pbx11mp()     check_pbx_proc(REALVIEW_PBX_PROC_ARM11MP)
-#define core_tile_pbxa9mp()     check_pbx_proc(REALVIEW_PBX_PROC_A9MP)
-#define core_tile_pbxa8()       check_pbx_proc(REALVIEW_PBX_PROC_A8)
-#else
-#define core_tile_pbx11mp()     0
-#define core_tile_pbxa9mp()     0
-#define core_tile_pbxa8()       0
-#endif
-
-#endif	/* __ASM_ARCH_BOARD_PBX_H */
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
deleted file mode 100644
index a0ead0a..0000000
--- a/arch/arm/mach-realview/core.c
+++ /dev/null
@@ -1,405 +0,0 @@
-/*
- *  linux/arch/arm/mach-realview/core.c
- *
- *  Copyright (C) 1999 - 2003 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/device.h>
-#include <linux/interrupt.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/clcd.h>
-#include <linux/platform_data/video-clcd-versatile.h>
-#include <linux/io.h>
-#include <linux/smsc911x.h>
-#include <linux/smc91x.h>
-#include <linux/ata_platform.h>
-#include <linux/amba/mmci.h>
-#include <linux/gfp.h>
-#include <linux/mtd/physmap.h>
-#include <linux/memblock.h>
-
-#include <clocksource/timer-sp804.h>
-#include "hardware.h"
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-#include <asm/hardware/icst.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/map.h>
-
-#include "platform.h"
-
-#include <plat/sched_clock.h>
-
-#include "core.h"
-
-#define REALVIEW_FLASHCTRL    (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_FLASH_OFFSET)
-
-static void realview_flash_set_vpp(struct platform_device *pdev, int on)
-{
-	u32 val;
-
-	val = __raw_readl(REALVIEW_FLASHCTRL);
-	if (on)
-		val |= REALVIEW_FLASHPROG_FLVPPEN;
-	else
-		val &= ~REALVIEW_FLASHPROG_FLVPPEN;
-	__raw_writel(val, REALVIEW_FLASHCTRL);
-}
-
-static struct physmap_flash_data realview_flash_data = {
-	.width			= 4,
-	.set_vpp		= realview_flash_set_vpp,
-};
-
-struct platform_device realview_flash_device = {
-	.name			= "physmap-flash",
-	.id			= 0,
-	.dev			= {
-		.platform_data	= &realview_flash_data,
-	},
-};
-
-int realview_flash_register(struct resource *res, u32 num)
-{
-	realview_flash_device.resource = res;
-	realview_flash_device.num_resources = num;
-	return platform_device_register(&realview_flash_device);
-}
-
-static struct smsc911x_platform_config smsc911x_config = {
-	.flags		= SMSC911X_USE_32BIT,
-	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
-	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
-	.phy_interface	= PHY_INTERFACE_MODE_MII,
-};
-
-static struct smc91x_platdata smc91x_platdata = {
-	.flags = SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT |
-		 SMC91X_NOWAIT,
-};
-
-static struct platform_device realview_eth_device = {
-	.name		= "smsc911x",
-	.id		= 0,
-	.num_resources	= 2,
-};
-
-int realview_eth_register(const char *name, struct resource *res)
-{
-	if (name)
-		realview_eth_device.name = name;
-	realview_eth_device.resource = res;
-	if (strcmp(realview_eth_device.name, "smsc911x") == 0)
-		realview_eth_device.dev.platform_data = &smsc911x_config;
-	else
-		realview_eth_device.dev.platform_data = &smc91x_platdata;
-
-	return platform_device_register(&realview_eth_device);
-}
-
-struct platform_device realview_usb_device = {
-	.name			= "isp1760",
-	.num_resources		= 2,
-};
-
-int realview_usb_register(struct resource *res)
-{
-	realview_usb_device.resource = res;
-	return platform_device_register(&realview_usb_device);
-}
-
-static struct pata_platform_info pata_platform_data = {
-	.ioport_shift		= 1,
-};
-
-static struct resource pata_resources[] = {
-	[0] = {
-		.start		= REALVIEW_CF_BASE,
-		.end		= REALVIEW_CF_BASE + 0xff,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= REALVIEW_CF_BASE + 0x100,
-		.end		= REALVIEW_CF_BASE + SZ_4K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-struct platform_device realview_cf_device = {
-	.name			= "pata_platform",
-	.id			= -1,
-	.num_resources		= ARRAY_SIZE(pata_resources),
-	.resource		= pata_resources,
-	.dev			= {
-		.platform_data	= &pata_platform_data,
-	},
-};
-
-static struct resource realview_leds_resources[] = {
-	{
-		.start	= REALVIEW_SYS_BASE + REALVIEW_SYS_LED_OFFSET,
-		.end	= REALVIEW_SYS_BASE + REALVIEW_SYS_LED_OFFSET + 4,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-struct platform_device realview_leds_device = {
-	.name		= "versatile-leds",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(realview_leds_resources),
-	.resource	= realview_leds_resources,
-};
-
-static struct resource realview_i2c_resource = {
-	.start		= REALVIEW_I2C_BASE,
-	.end		= REALVIEW_I2C_BASE + SZ_4K - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-struct platform_device realview_i2c_device = {
-	.name		= "versatile-i2c",
-	.id		= 0,
-	.num_resources	= 1,
-	.resource	= &realview_i2c_resource,
-};
-
-static struct i2c_board_info realview_i2c_board_info[] = {
-	{
-		I2C_BOARD_INFO("ds1338", 0xd0 >> 1),
-	},
-};
-
-static int __init realview_i2c_init(void)
-{
-	return i2c_register_board_info(0, realview_i2c_board_info,
-				       ARRAY_SIZE(realview_i2c_board_info));
-}
-arch_initcall(realview_i2c_init);
-
-#define REALVIEW_SYSMCI	(__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_MCI_OFFSET)
-
-/*
- * This is only used if GPIOLIB support is disabled
- */
-static unsigned int realview_mmc_status(struct device *dev)
-{
-	struct amba_device *adev = container_of(dev, struct amba_device, dev);
-	u32 mask;
-
-	if (machine_is_realview_pb1176()) {
-		static bool inserted = false;
-
-		/*
-		 * The PB1176 does not have the status register,
-		 * assume it is inserted at startup, then invert
-		 * for each call so card insertion/removal will
-		 * be detected anyway. This will not be called if
-		 * GPIO on PL061 is active, which is the proper
-		 * way to do this on the PB1176.
-		 */
-		inserted = !inserted;
-		return inserted ? 0 : 1;
-	}
-
-	if (adev->res.start == REALVIEW_MMCI0_BASE)
-		mask = 1;
-	else
-		mask = 2;
-
-	return readl(REALVIEW_SYSMCI) & mask;
-}
-
-struct mmci_platform_data realview_mmc0_plat_data = {
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.status		= realview_mmc_status,
-	.gpio_wp	= 17,
-	.gpio_cd	= 16,
-	.cd_invert	= true,
-};
-
-struct mmci_platform_data realview_mmc1_plat_data = {
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.status		= realview_mmc_status,
-	.gpio_wp	= 19,
-	.gpio_cd	= 18,
-	.cd_invert	= true,
-};
-
-void __init realview_init_early(void)
-{
-	void __iomem *sys = __io_address(REALVIEW_SYS_BASE);
-
-	versatile_sched_clock_init(sys + REALVIEW_SYS_24MHz_OFFSET, 24000000);
-}
-
-/*
- * CLCD support.
- */
-#define SYS_CLCD_NLCDIOON	(1 << 2)
-#define SYS_CLCD_VDDPOSSWITCH	(1 << 3)
-#define SYS_CLCD_PWR3V5SWITCH	(1 << 4)
-#define SYS_CLCD_ID_MASK	(0x1f << 8)
-#define SYS_CLCD_ID_SANYO_3_8	(0x00 << 8)
-#define SYS_CLCD_ID_UNKNOWN_8_4	(0x01 << 8)
-#define SYS_CLCD_ID_EPSON_2_2	(0x02 << 8)
-#define SYS_CLCD_ID_SANYO_2_5	(0x07 << 8)
-#define SYS_CLCD_ID_VGA		(0x1f << 8)
-
-/*
- * Disable all display connectors on the interface module.
- */
-static void realview_clcd_disable(struct clcd_fb *fb)
-{
-	void __iomem *sys_clcd = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_CLCD_OFFSET;
-	u32 val;
-
-	val = readl(sys_clcd);
-	val &= ~SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH;
-	writel(val, sys_clcd);
-}
-
-/*
- * Enable the relevant connector on the interface module.
- */
-static void realview_clcd_enable(struct clcd_fb *fb)
-{
-	void __iomem *sys_clcd = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_CLCD_OFFSET;
-	u32 val;
-
-	/*
-	 * Enable the PSUs
-	 */
-	val = readl(sys_clcd);
-	val |= SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH;
-	writel(val, sys_clcd);
-}
-
-/*
- * Detect which LCD panel is connected, and return the appropriate
- * clcd_panel structure.  Note: we do not have any information on
- * the required timings for the 8.4in panel, so we presently assume
- * VGA timings.
- */
-static int realview_clcd_setup(struct clcd_fb *fb)
-{
-	void __iomem *sys_clcd = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_CLCD_OFFSET;
-	const char *panel_name, *vga_panel_name;
-	unsigned long framesize;
-	u32 val;
-
-	if (machine_is_realview_eb()) {
-		/* VGA, 16bpp */
-		framesize = 640 * 480 * 2;
-		vga_panel_name = "VGA";
-	} else {
-		/* XVGA, 16bpp */
-		framesize = 1024 * 768 * 2;
-		vga_panel_name = "XVGA";
-	}
-
-	val = readl(sys_clcd) & SYS_CLCD_ID_MASK;
-	if (val == SYS_CLCD_ID_SANYO_3_8)
-		panel_name = "Sanyo TM38QV67A02A";
-	else if (val == SYS_CLCD_ID_SANYO_2_5)
-		panel_name = "Sanyo QVGA Portrait";
-	else if (val == SYS_CLCD_ID_EPSON_2_2)
-		panel_name = "Epson L2F50113T00";
-	else if (val == SYS_CLCD_ID_VGA)
-		panel_name = vga_panel_name;
-	else {
-		pr_err("CLCD: unknown LCD panel ID 0x%08x, using VGA\n", val);
-		panel_name = vga_panel_name;
-	}
-
-	fb->panel = versatile_clcd_get_panel(panel_name);
-	if (!fb->panel)
-		return -EINVAL;
-
-	return versatile_clcd_setup_dma(fb, framesize);
-}
-
-struct clcd_board clcd_plat_data = {
-	.name		= "RealView",
-	.caps		= CLCD_CAP_ALL,
-	.check		= clcdfb_check,
-	.decode		= clcdfb_decode,
-	.disable	= realview_clcd_disable,
-	.enable		= realview_clcd_enable,
-	.setup		= realview_clcd_setup,
-	.mmap		= versatile_clcd_mmap_dma,
-	.remove		= versatile_clcd_remove_dma,
-};
-
-/*
- * Where is the timer (VA)?
- */
-void __iomem *timer0_va_base;
-void __iomem *timer1_va_base;
-void __iomem *timer2_va_base;
-void __iomem *timer3_va_base;
-
-/*
- * Set up the clock source and clock events devices
- */
-void __init realview_timer_init(unsigned int timer_irq)
-{
-	u32 val;
-
-	/* 
-	 * set clock frequency: 
-	 *	REALVIEW_REFCLK is 32KHz
-	 *	REALVIEW_TIMCLK is 1MHz
-	 */
-	val = readl(__io_address(REALVIEW_SCTL_BASE));
-	writel((REALVIEW_TIMCLK << REALVIEW_TIMER1_EnSel) |
-	       (REALVIEW_TIMCLK << REALVIEW_TIMER2_EnSel) | 
-	       (REALVIEW_TIMCLK << REALVIEW_TIMER3_EnSel) |
-	       (REALVIEW_TIMCLK << REALVIEW_TIMER4_EnSel) | val,
-	       __io_address(REALVIEW_SCTL_BASE));
-
-	/*
-	 * Initialise to a known state (all timers off)
-	 */
-	sp804_timer_disable(timer0_va_base);
-	sp804_timer_disable(timer1_va_base);
-	sp804_timer_disable(timer2_va_base);
-	sp804_timer_disable(timer3_va_base);
-
-	sp804_clocksource_init(timer3_va_base, "timer3");
-	sp804_clockevents_init(timer0_va_base, timer_irq, "timer0");
-}
-
-/*
- * Setup the memory banks.
- */
-void realview_fixup(struct tag *tags, char **from)
-{
-	/*
-	 * Most RealView platforms have 512MB contiguous RAM at 0x70000000.
-	 * Half of this is mirrored at 0.
-	 */
-#ifdef CONFIG_REALVIEW_HIGH_PHYS_OFFSET
-	memblock_add(0x70000000, SZ_512M);
-#else
-	memblock_add(0, SZ_256M);
-#endif
-}
diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h
deleted file mode 100644
index 05a995e..0000000
--- a/arch/arm/mach-realview/core.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- *  Copyright (C) 2004 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_REALVIEW_H
-#define __ASM_ARCH_REALVIEW_H
-
-#include <linux/amba/bus.h>
-#include <linux/io.h>
-
-#include <asm/setup.h>
-
-#define APB_DEVICE(name, busid, base, plat)			\
-static AMBA_APB_DEVICE(name, busid, 0, REALVIEW_##base##_BASE, base##_IRQ, plat)
-
-#define AHB_DEVICE(name, busid, base, plat)			\
-static AMBA_AHB_DEVICE(name, busid, 0, REALVIEW_##base##_BASE, base##_IRQ, plat)
-
-struct machine_desc;
-
-extern struct platform_device realview_flash_device;
-extern struct platform_device realview_cf_device;
-extern struct platform_device realview_leds_device;
-extern struct platform_device realview_i2c_device;
-extern struct mmci_platform_data realview_mmc0_plat_data;
-extern struct mmci_platform_data realview_mmc1_plat_data;
-extern struct clcd_board clcd_plat_data;
-extern void __iomem *timer0_va_base;
-extern void __iomem *timer1_va_base;
-extern void __iomem *timer2_va_base;
-extern void __iomem *timer3_va_base;
-
-extern void realview_timer_init(unsigned int timer_irq);
-extern int realview_flash_register(struct resource *res, u32 num);
-extern int realview_eth_register(const char *name, struct resource *res);
-extern int realview_usb_register(struct resource *res);
-extern void realview_init_early(void);
-extern void realview_fixup(struct tag *tags, char **from);
-
-extern const struct smp_operations realview_smp_ops;
-extern void realview_cpu_die(unsigned int cpu);
-
-#endif
diff --git a/arch/arm/mach-realview/hardware.h b/arch/arm/mach-realview/hardware.h
deleted file mode 100644
index 957a230..0000000
--- a/arch/arm/mach-realview/hardware.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- *  This file contains the hardware definitions of the RealView boards.
- *
- *  Copyright (C) 2003 ARM Limited.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h>
-
-/* macro to get at IO space when running virtually */
-#ifdef CONFIG_MMU
-/*
- * Statically mapped addresses:
- *
- * 10xx xxxx -> fbxx xxxx
- * 1exx xxxx -> fdxx xxxx
- * 1fxx xxxx -> fexx xxxx
- */
-#define IO_ADDRESS(x)		(((x) & 0x03ffffff) + 0xfb000000)
-#else
-#define IO_ADDRESS(x)		(x)
-#endif
-#define __io_address(n)		IOMEM(IO_ADDRESS(n))
-
-#endif
diff --git a/arch/arm/mach-realview/hotplug.h b/arch/arm/mach-realview/hotplug.h
new file mode 100644
index 0000000..eacd7a4
--- /dev/null
+++ b/arch/arm/mach-realview/hotplug.h
@@ -0,0 +1 @@
+void realview_cpu_die(unsigned int cpu);
diff --git a/arch/arm/mach-realview/irqs-eb.h b/arch/arm/mach-realview/irqs-eb.h
deleted file mode 100644
index 61e3168..0000000
--- a/arch/arm/mach-realview/irqs-eb.h
+++ /dev/null
@@ -1,114 +0,0 @@
-/*
- * Copyright (C) 2007 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __MACH_IRQS_EB_H
-#define __MACH_IRQS_EB_H
-
-#define IRQ_LOCALTIMER		29
-#define IRQ_EB_GIC_START	32
-
-/*
- * RealView EB interrupt sources
- */
-#define IRQ_EB_WDOG		(IRQ_EB_GIC_START + 0)		/* Watchdog timer */
-#define IRQ_EB_SOFT		(IRQ_EB_GIC_START + 1)		/* Software interrupt */
-#define IRQ_EB_COMMRx		(IRQ_EB_GIC_START + 2)		/* Debug Comm Rx interrupt */
-#define IRQ_EB_COMMTx		(IRQ_EB_GIC_START + 3)		/* Debug Comm Tx interrupt */
-#define IRQ_EB_TIMER0_1		(IRQ_EB_GIC_START + 4)		/* Timer 0 and 1 */
-#define IRQ_EB_TIMER2_3		(IRQ_EB_GIC_START + 5)		/* Timer 2 and 3 */
-#define IRQ_EB_GPIO0		(IRQ_EB_GIC_START + 6)		/* GPIO 0 */
-#define IRQ_EB_GPIO1		(IRQ_EB_GIC_START + 7)		/* GPIO 1 */
-#define IRQ_EB_GPIO2		(IRQ_EB_GIC_START + 8)		/* GPIO 2 */
-								/* 9 reserved */
-#define IRQ_EB_RTC		(IRQ_EB_GIC_START + 10)		/* Real Time Clock */
-#define IRQ_EB_SSP		(IRQ_EB_GIC_START + 11)		/* Synchronous Serial Port */
-#define IRQ_EB_UART0		(IRQ_EB_GIC_START + 12)		/* UART 0 on development chip */
-#define IRQ_EB_UART1		(IRQ_EB_GIC_START + 13)		/* UART 1 on development chip */
-#define IRQ_EB_UART2		(IRQ_EB_GIC_START + 14)		/* UART 2 on development chip */
-#define IRQ_EB_UART3		(IRQ_EB_GIC_START + 15)		/* UART 3 on development chip */
-#define IRQ_EB_SCI		(IRQ_EB_GIC_START + 16)		/* Smart Card Interface */
-#define IRQ_EB_MMCI0A		(IRQ_EB_GIC_START + 17)		/* Multimedia Card 0A */
-#define IRQ_EB_MMCI0B		(IRQ_EB_GIC_START + 18)		/* Multimedia Card 0B */
-#define IRQ_EB_AACI		(IRQ_EB_GIC_START + 19)		/* Audio Codec */
-#define IRQ_EB_KMI0		(IRQ_EB_GIC_START + 20)		/* Keyboard/Mouse port 0 */
-#define IRQ_EB_KMI1		(IRQ_EB_GIC_START + 21)		/* Keyboard/Mouse port 1 */
-#define IRQ_EB_CHARLCD		(IRQ_EB_GIC_START + 22)		/* Character LCD */
-#define IRQ_EB_CLCD		(IRQ_EB_GIC_START + 23)		/* CLCD controller */
-#define IRQ_EB_DMA		(IRQ_EB_GIC_START + 24)		/* DMA controller */
-#define IRQ_EB_PWRFAIL		(IRQ_EB_GIC_START + 25)		/* Power failure */
-#define IRQ_EB_PISMO		(IRQ_EB_GIC_START + 26)		/* PISMO interface */
-#define IRQ_EB_DoC		(IRQ_EB_GIC_START + 27)		/* Disk on Chip memory controller */
-#define IRQ_EB_ETH		(IRQ_EB_GIC_START + 28)		/* Ethernet controller */
-#define IRQ_EB_USB		(IRQ_EB_GIC_START + 29)		/* USB controller */
-#define IRQ_EB_TSPEN		(IRQ_EB_GIC_START + 30)		/* Touchscreen pen */
-#define IRQ_EB_TSKPAD		(IRQ_EB_GIC_START + 31)		/* Touchscreen keypad */
-
-/*
- * RealView EB + ARM11MPCore interrupt sources (primary GIC on the core tile)
- */
-#define IRQ_EB11MP_AACI		(IRQ_EB_GIC_START + 0)
-#define IRQ_EB11MP_TIMER0_1	(IRQ_EB_GIC_START + 1)
-#define IRQ_EB11MP_TIMER2_3	(IRQ_EB_GIC_START + 2)
-#define IRQ_EB11MP_USB		(IRQ_EB_GIC_START + 3)
-#define IRQ_EB11MP_UART0	(IRQ_EB_GIC_START + 4)
-#define IRQ_EB11MP_UART1	(IRQ_EB_GIC_START + 5)
-#define IRQ_EB11MP_RTC		(IRQ_EB_GIC_START + 6)
-#define IRQ_EB11MP_KMI0		(IRQ_EB_GIC_START + 7)
-#define IRQ_EB11MP_KMI1		(IRQ_EB_GIC_START + 8)
-#define IRQ_EB11MP_ETH		(IRQ_EB_GIC_START + 9)
-#define IRQ_EB11MP_EB_IRQ1	(IRQ_EB_GIC_START + 10)		/* main GIC */
-#define IRQ_EB11MP_EB_IRQ2	(IRQ_EB_GIC_START + 11)		/* tile GIC */
-#define IRQ_EB11MP_EB_FIQ1	(IRQ_EB_GIC_START + 12)		/* main GIC */
-#define IRQ_EB11MP_EB_FIQ2	(IRQ_EB_GIC_START + 13)		/* tile GIC */
-#define IRQ_EB11MP_MMCI0A	(IRQ_EB_GIC_START + 14)
-#define IRQ_EB11MP_MMCI0B	(IRQ_EB_GIC_START + 15)
-
-#define IRQ_EB11MP_PMU_CPU0	(IRQ_EB_GIC_START + 17)
-#define IRQ_EB11MP_PMU_CPU1	(IRQ_EB_GIC_START + 18)
-#define IRQ_EB11MP_PMU_CPU2	(IRQ_EB_GIC_START + 19)
-#define IRQ_EB11MP_PMU_CPU3	(IRQ_EB_GIC_START + 20)
-#define IRQ_EB11MP_PMU_SCU0	(IRQ_EB_GIC_START + 21)
-#define IRQ_EB11MP_PMU_SCU1	(IRQ_EB_GIC_START + 22)
-#define IRQ_EB11MP_PMU_SCU2	(IRQ_EB_GIC_START + 23)
-#define IRQ_EB11MP_PMU_SCU3	(IRQ_EB_GIC_START + 24)
-#define IRQ_EB11MP_PMU_SCU4	(IRQ_EB_GIC_START + 25)
-#define IRQ_EB11MP_PMU_SCU5	(IRQ_EB_GIC_START + 26)
-#define IRQ_EB11MP_PMU_SCU6	(IRQ_EB_GIC_START + 27)
-#define IRQ_EB11MP_PMU_SCU7	(IRQ_EB_GIC_START + 28)
-
-#define IRQ_EB11MP_L220_EVENT	(IRQ_EB_GIC_START + 29)
-#define IRQ_EB11MP_L220_SLAVE	(IRQ_EB_GIC_START + 30)
-#define IRQ_EB11MP_L220_DECODE	(IRQ_EB_GIC_START + 31)
-
-/*
- * The 11MPcore tile leaves the following unconnected.
- */
-#define IRQ_EB11MP_UART2	0
-#define IRQ_EB11MP_UART3	0
-#define IRQ_EB11MP_CLCD		0
-#define IRQ_EB11MP_DMA		0
-#define IRQ_EB11MP_WDOG		0
-#define IRQ_EB11MP_GPIO0	0
-#define IRQ_EB11MP_GPIO1	0
-#define IRQ_EB11MP_GPIO2	0
-#define IRQ_EB11MP_SCI		0
-#define IRQ_EB11MP_SSP		0
-
-#define NR_GIC_EB11MP		2
-
-#endif	/* __MACH_IRQS_EB_H */
diff --git a/arch/arm/mach-realview/irqs-pb1176.h b/arch/arm/mach-realview/irqs-pb1176.h
deleted file mode 100644
index 778edfd..0000000
--- a/arch/arm/mach-realview/irqs-pb1176.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * Copyright (C) 2008 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __MACH_IRQS_PB1176_H
-#define __MACH_IRQS_PB1176_H
-
-#define IRQ_DC1176_GIC_START			32
-#define IRQ_PB1176_GIC_START			64
-
-/*
- * ARM1176 DevChip interrupt sources (primary GIC)
- */
-#define IRQ_DC1176_WATCHDOG	(IRQ_DC1176_GIC_START + 0)	/* Watchdog timer */
-#define IRQ_DC1176_SOFTINT	(IRQ_DC1176_GIC_START + 1)	/* Software interrupt */
-#define IRQ_DC1176_COMMRx	(IRQ_DC1176_GIC_START + 2)	/* Debug Comm Rx interrupt */
-#define IRQ_DC1176_COMMTx	(IRQ_DC1176_GIC_START + 3)	/* Debug Comm Tx interrupt */
-#define IRQ_DC1176_CORE_PMU	(IRQ_DC1176_GIC_START + 7)	/* Core PMU interrupt */
-#define IRQ_DC1176_TIMER0	(IRQ_DC1176_GIC_START + 8)	/* Timer 0 */
-#define IRQ_DC1176_TIMER1	(IRQ_DC1176_GIC_START + 9)	/* Timer 1 */
-#define IRQ_DC1176_TIMER2	(IRQ_DC1176_GIC_START + 10)	/* Timer 2 */
-#define IRQ_DC1176_APC		(IRQ_DC1176_GIC_START + 11)
-#define IRQ_DC1176_IEC		(IRQ_DC1176_GIC_START + 12)
-#define IRQ_DC1176_L2CC		(IRQ_DC1176_GIC_START + 13)
-#define IRQ_DC1176_RTC		(IRQ_DC1176_GIC_START + 14)
-#define IRQ_DC1176_CLCD		(IRQ_DC1176_GIC_START + 15)	/* CLCD controller */
-#define IRQ_DC1176_GPIO0	(IRQ_DC1176_GIC_START + 16)
-#define IRQ_DC1176_SSP		(IRQ_DC1176_GIC_START + 17)	/* SSP port */
-#define IRQ_DC1176_UART0	(IRQ_DC1176_GIC_START + 18)	/* UART 0 on development chip */
-#define IRQ_DC1176_UART1	(IRQ_DC1176_GIC_START + 19)	/* UART 1 on development chip */
-#define IRQ_DC1176_UART2	(IRQ_DC1176_GIC_START + 20)	/* UART 2 on development chip */
-#define IRQ_DC1176_UART3	(IRQ_DC1176_GIC_START + 21)	/* UART 3 on development chip */
-
-#define IRQ_DC1176_PB_IRQ2	(IRQ_DC1176_GIC_START + 30)	/* tile GIC */
-#define IRQ_DC1176_PB_IRQ1	(IRQ_DC1176_GIC_START + 31)	/* main GIC */
-
-/*
- * RealView PB1176 interrupt sources (secondary GIC)
- */
-#define IRQ_PB1176_MMCI0A	(IRQ_PB1176_GIC_START + 1)	/* Multimedia Card 0A */
-#define IRQ_PB1176_MMCI0B	(IRQ_PB1176_GIC_START + 2)	/* Multimedia Card 0A */
-#define IRQ_PB1176_KMI0		(IRQ_PB1176_GIC_START + 3)	/* Keyboard/Mouse port 0 */
-#define IRQ_PB1176_KMI1		(IRQ_PB1176_GIC_START + 4)	/* Keyboard/Mouse port 1 */
-#define IRQ_PB1176_SCI		(IRQ_PB1176_GIC_START + 5)
-#define IRQ_PB1176_UART4	(IRQ_PB1176_GIC_START + 6)	/* UART 4 on baseboard */
-#define IRQ_PB1176_CHARLCD	(IRQ_PB1176_GIC_START + 7)	/* Character LCD */
-#define IRQ_PB1176_GPIO1	(IRQ_PB1176_GIC_START + 8)
-#define IRQ_PB1176_GPIO2	(IRQ_PB1176_GIC_START + 9)
-#define IRQ_PB1176_ETH		(IRQ_PB1176_GIC_START + 10)	/* Ethernet controller */
-#define IRQ_PB1176_USB		(IRQ_PB1176_GIC_START + 11)	/* USB controller */
-
-#define IRQ_PB1176_PISMO	(IRQ_PB1176_GIC_START + 16)
-
-#define IRQ_PB1176_AACI		(IRQ_PB1176_GIC_START + 19)	/* Audio Codec */
-
-#define IRQ_PB1176_TIMER0_1	(IRQ_PB1176_GIC_START + 22)
-#define IRQ_PB1176_TIMER2_3	(IRQ_PB1176_GIC_START + 23)
-#define IRQ_PB1176_DMAC		(IRQ_PB1176_GIC_START + 24)	/* DMA controller */
-#define IRQ_PB1176_RTC		(IRQ_PB1176_GIC_START + 25)	/* Real Time Clock */
-
-#define IRQ_PB1176_SCTL		-1
-
-#endif	/* __MACH_IRQS_PB1176_H */
diff --git a/arch/arm/mach-realview/irqs-pb11mp.h b/arch/arm/mach-realview/irqs-pb11mp.h
deleted file mode 100644
index 938898a..0000000
--- a/arch/arm/mach-realview/irqs-pb11mp.h
+++ /dev/null
@@ -1,97 +0,0 @@
-/*
- * Copyright (C) 2008 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __MACH_IRQS_PB11MP_H
-#define __MACH_IRQS_PB11MP_H
-
-#define IRQ_LOCALTIMER				29
-#define IRQ_TC11MP_GIC_START			32
-#define IRQ_PB11MP_GIC_START			64
-
-/*
- * ARM11MPCore test chip interrupt sources (primary GIC on the test chip)
- */
-#define IRQ_TC11MP_AACI		(IRQ_TC11MP_GIC_START + 0)
-#define IRQ_TC11MP_TIMER0_1	(IRQ_TC11MP_GIC_START + 1)
-#define IRQ_TC11MP_TIMER2_3	(IRQ_TC11MP_GIC_START + 2)
-#define IRQ_TC11MP_USB		(IRQ_TC11MP_GIC_START + 3)
-#define IRQ_TC11MP_UART0	(IRQ_TC11MP_GIC_START + 4)
-#define IRQ_TC11MP_UART1	(IRQ_TC11MP_GIC_START + 5)
-#define IRQ_TC11MP_RTC		(IRQ_TC11MP_GIC_START + 6)
-#define IRQ_TC11MP_KMI0		(IRQ_TC11MP_GIC_START + 7)
-#define IRQ_TC11MP_KMI1		(IRQ_TC11MP_GIC_START + 8)
-#define IRQ_TC11MP_ETH		(IRQ_TC11MP_GIC_START + 9)
-#define IRQ_TC11MP_PB_IRQ1	(IRQ_TC11MP_GIC_START + 10)		/* main GIC */
-#define IRQ_TC11MP_PB_IRQ2	(IRQ_TC11MP_GIC_START + 11)		/* tile GIC */
-#define IRQ_TC11MP_PB_FIQ1	(IRQ_TC11MP_GIC_START + 12)		/* main GIC */
-#define IRQ_TC11MP_PB_FIQ2	(IRQ_TC11MP_GIC_START + 13)		/* tile GIC */
-#define IRQ_TC11MP_MMCI0A	(IRQ_TC11MP_GIC_START + 14)
-#define IRQ_TC11MP_MMCI0B	(IRQ_TC11MP_GIC_START + 15)
-
-#define IRQ_TC11MP_PMU_CPU0	(IRQ_TC11MP_GIC_START + 17)
-#define IRQ_TC11MP_PMU_CPU1	(IRQ_TC11MP_GIC_START + 18)
-#define IRQ_TC11MP_PMU_CPU2	(IRQ_TC11MP_GIC_START + 19)
-#define IRQ_TC11MP_PMU_CPU3	(IRQ_TC11MP_GIC_START + 20)
-#define IRQ_TC11MP_PMU_SCU0	(IRQ_TC11MP_GIC_START + 21)
-#define IRQ_TC11MP_PMU_SCU1	(IRQ_TC11MP_GIC_START + 22)
-#define IRQ_TC11MP_PMU_SCU2	(IRQ_TC11MP_GIC_START + 23)
-#define IRQ_TC11MP_PMU_SCU3	(IRQ_TC11MP_GIC_START + 24)
-#define IRQ_TC11MP_PMU_SCU4	(IRQ_TC11MP_GIC_START + 25)
-#define IRQ_TC11MP_PMU_SCU5	(IRQ_TC11MP_GIC_START + 26)
-#define IRQ_TC11MP_PMU_SCU6	(IRQ_TC11MP_GIC_START + 27)
-#define IRQ_TC11MP_PMU_SCU7	(IRQ_TC11MP_GIC_START + 28)
-
-#define IRQ_TC11MP_L220_EVENT	(IRQ_TC11MP_GIC_START + 29)
-#define IRQ_TC11MP_L220_SLAVE	(IRQ_TC11MP_GIC_START + 30)
-#define IRQ_TC11MP_L220_DECODE	(IRQ_TC11MP_GIC_START + 31)
-
-/*
- * RealView PB11MPCore GIC interrupt sources (secondary GIC on the board)
- */
-#define IRQ_PB11MP_WATCHDOG	(IRQ_PB11MP_GIC_START + 0)	/* Watchdog timer */
-#define IRQ_PB11MP_SOFT		(IRQ_PB11MP_GIC_START + 1)	/* Software interrupt */
-#define IRQ_PB11MP_COMMRx	(IRQ_PB11MP_GIC_START + 2)	/* Debug Comm Rx interrupt */
-#define IRQ_PB11MP_COMMTx	(IRQ_PB11MP_GIC_START + 3)	/* Debug Comm Tx interrupt */
-#define IRQ_PB11MP_GPIO0	(IRQ_PB11MP_GIC_START + 6)	/* GPIO 0 */
-#define IRQ_PB11MP_GPIO1	(IRQ_PB11MP_GIC_START + 7)	/* GPIO 1 */
-#define IRQ_PB11MP_GPIO2	(IRQ_PB11MP_GIC_START + 8)	/* GPIO 2 */
-								/* 9 reserved */
-#define IRQ_PB11MP_RTC_GIC1	(IRQ_PB11MP_GIC_START + 10)	/* Real Time Clock */
-#define IRQ_PB11MP_SSP		(IRQ_PB11MP_GIC_START + 11)	/* Synchronous Serial Port */
-#define IRQ_PB11MP_UART0_GIC1	(IRQ_PB11MP_GIC_START + 12)	/* UART 0 on development chip */
-#define IRQ_PB11MP_UART1_GIC1	(IRQ_PB11MP_GIC_START + 13)	/* UART 1 on development chip */
-#define IRQ_PB11MP_UART2	(IRQ_PB11MP_GIC_START + 14)	/* UART 2 on development chip */
-#define IRQ_PB11MP_UART3	(IRQ_PB11MP_GIC_START + 15)	/* UART 3 on development chip */
-#define IRQ_PB11MP_SCI		(IRQ_PB11MP_GIC_START + 16)	/* Smart Card Interface */
-#define IRQ_PB11MP_MMCI0A_GIC1	(IRQ_PB11MP_GIC_START + 17)	/* Multimedia Card 0A */
-#define IRQ_PB11MP_MMCI0B_GIC1	(IRQ_PB11MP_GIC_START + 18)	/* Multimedia Card 0B */
-#define IRQ_PB11MP_AACI_GIC1	(IRQ_PB11MP_GIC_START + 19)	/* Audio Codec */
-#define IRQ_PB11MP_KMI0_GIC1	(IRQ_PB11MP_GIC_START + 20)	/* Keyboard/Mouse port 0 */
-#define IRQ_PB11MP_KMI1_GIC1	(IRQ_PB11MP_GIC_START + 21)	/* Keyboard/Mouse port 1 */
-#define IRQ_PB11MP_CHARLCD	(IRQ_PB11MP_GIC_START + 22)	/* Character LCD */
-#define IRQ_PB11MP_CLCD		(IRQ_PB11MP_GIC_START + 23)	/* CLCD controller */
-#define IRQ_PB11MP_DMAC		(IRQ_PB11MP_GIC_START + 24)	/* DMA controller */
-#define IRQ_PB11MP_PWRFAIL	(IRQ_PB11MP_GIC_START + 25)	/* Power failure */
-#define IRQ_PB11MP_PISMO	(IRQ_PB11MP_GIC_START + 26)	/* PISMO interface */
-#define IRQ_PB11MP_DoC		(IRQ_PB11MP_GIC_START + 27)	/* Disk on Chip memory controller */
-#define IRQ_PB11MP_ETH_GIC1	(IRQ_PB11MP_GIC_START + 28)	/* Ethernet controller */
-#define IRQ_PB11MP_USB_GIC1	(IRQ_PB11MP_GIC_START + 29)	/* USB controller */
-#define IRQ_PB11MP_TSPEN	(IRQ_PB11MP_GIC_START + 30)	/* Touchscreen pen */
-#define IRQ_PB11MP_TSKPAD	(IRQ_PB11MP_GIC_START + 31)	/* Touchscreen keypad */
-
-#endif	/* __MACH_IRQS_PB11MP_H */
diff --git a/arch/arm/mach-realview/irqs-pba8.h b/arch/arm/mach-realview/irqs-pba8.h
deleted file mode 100644
index 262e321..0000000
--- a/arch/arm/mach-realview/irqs-pba8.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * Copyright (C) 2008 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __MACH_IRQS_PBA8_H
-#define __MACH_IRQS_PBA8_H
-
-#define IRQ_PBA8_GIC_START			32
-
-/*
- * PB-A8 on-board gic irq sources
- */
-#define IRQ_PBA8_WATCHDOG	(IRQ_PBA8_GIC_START + 0)	/* Watchdog timer */
-#define IRQ_PBA8_SOFT		(IRQ_PBA8_GIC_START + 1)	/* Software interrupt */
-#define IRQ_PBA8_COMMRx		(IRQ_PBA8_GIC_START + 2)	/* Debug Comm Rx interrupt */
-#define IRQ_PBA8_COMMTx		(IRQ_PBA8_GIC_START + 3)	/* Debug Comm Tx interrupt */
-#define IRQ_PBA8_TIMER0_1	(IRQ_PBA8_GIC_START + 4)	/* Timer 0/1 (default timer) */
-#define IRQ_PBA8_TIMER2_3	(IRQ_PBA8_GIC_START + 5)	/* Timer 2/3 */
-#define IRQ_PBA8_GPIO0		(IRQ_PBA8_GIC_START + 6)	/* GPIO 0 */
-#define IRQ_PBA8_GPIO1		(IRQ_PBA8_GIC_START + 7)	/* GPIO 1 */
-#define IRQ_PBA8_GPIO2		(IRQ_PBA8_GIC_START + 8)	/* GPIO 2 */
-								/* 9 reserved */
-#define IRQ_PBA8_RTC		(IRQ_PBA8_GIC_START + 10)	/* Real Time Clock */
-#define IRQ_PBA8_SSP		(IRQ_PBA8_GIC_START + 11)	/* Synchronous Serial Port */
-#define IRQ_PBA8_UART0		(IRQ_PBA8_GIC_START + 12)	/* UART 0 on development chip */
-#define IRQ_PBA8_UART1		(IRQ_PBA8_GIC_START + 13)	/* UART 1 on development chip */
-#define IRQ_PBA8_UART2		(IRQ_PBA8_GIC_START + 14)	/* UART 2 on development chip */
-#define IRQ_PBA8_UART3		(IRQ_PBA8_GIC_START + 15)	/* UART 3 on development chip */
-#define IRQ_PBA8_SCI		(IRQ_PBA8_GIC_START + 16)	/* Smart Card Interface */
-#define IRQ_PBA8_MMCI0A		(IRQ_PBA8_GIC_START + 17)	/* Multimedia Card 0A */
-#define IRQ_PBA8_MMCI0B		(IRQ_PBA8_GIC_START + 18)	/* Multimedia Card 0B */
-#define IRQ_PBA8_AACI		(IRQ_PBA8_GIC_START + 19)	/* Audio Codec */
-#define IRQ_PBA8_KMI0		(IRQ_PBA8_GIC_START + 20)	/* Keyboard/Mouse port 0 */
-#define IRQ_PBA8_KMI1		(IRQ_PBA8_GIC_START + 21)	/* Keyboard/Mouse port 1 */
-#define IRQ_PBA8_CHARLCD	(IRQ_PBA8_GIC_START + 22)	/* Character LCD */
-#define IRQ_PBA8_CLCD		(IRQ_PBA8_GIC_START + 23)	/* CLCD controller */
-#define IRQ_PBA8_DMAC		(IRQ_PBA8_GIC_START + 24)	/* DMA controller */
-#define IRQ_PBA8_PWRFAIL	(IRQ_PBA8_GIC_START + 25)	/* Power failure */
-#define IRQ_PBA8_PISMO		(IRQ_PBA8_GIC_START + 26)	/* PISMO interface */
-#define IRQ_PBA8_DoC		(IRQ_PBA8_GIC_START + 27)	/* Disk on Chip memory controller */
-#define IRQ_PBA8_ETH		(IRQ_PBA8_GIC_START + 28)	/* Ethernet controller */
-#define IRQ_PBA8_USB		(IRQ_PBA8_GIC_START + 29)	/* USB controller */
-#define IRQ_PBA8_TSPEN		(IRQ_PBA8_GIC_START + 30)	/* Touchscreen pen */
-#define IRQ_PBA8_TSKPAD		(IRQ_PBA8_GIC_START + 31)	/* Touchscreen keypad */
-
-#define IRQ_PBA8_PMU		(IRQ_PBA8_GIC_START + 47)	/* Cortex-A8 PMU */
-
-/* ... */
-#define IRQ_PBA8_PCI0		(IRQ_PBA8_GIC_START + 50)
-#define IRQ_PBA8_PCI1		(IRQ_PBA8_GIC_START + 51)
-#define IRQ_PBA8_PCI2		(IRQ_PBA8_GIC_START + 52)
-#define IRQ_PBA8_PCI3		(IRQ_PBA8_GIC_START + 53)
-
-#define IRQ_PBA8_SMC		-1
-#define IRQ_PBA8_SCTL		-1
-
-#endif	/* __MACH_IRQS_PBA8_H */
diff --git a/arch/arm/mach-realview/irqs-pbx.h b/arch/arm/mach-realview/irqs-pbx.h
deleted file mode 100644
index 4ef0567..0000000
--- a/arch/arm/mach-realview/irqs-pbx.h
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * Copyright (C) 2009 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __MACH_IRQS_PBX_H
-#define __MACH_IRQS_PBX_H
-
-#define IRQ_LOCALTIMER				29
-#define IRQ_PBX_GIC_START			32
-
-/*
- * PBX on-board gic irq sources
- */
-#define IRQ_PBX_WATCHDOG	(IRQ_PBX_GIC_START + 0)	/* Watchdog timer */
-#define IRQ_PBX_SOFT		(IRQ_PBX_GIC_START + 1)	/* Software interrupt */
-#define IRQ_PBX_COMMRx		(IRQ_PBX_GIC_START + 2)	/* Debug Comm Rx interrupt */
-#define IRQ_PBX_COMMTx		(IRQ_PBX_GIC_START + 3)	/* Debug Comm Tx interrupt */
-#define IRQ_PBX_TIMER0_1	(IRQ_PBX_GIC_START + 4)	/* Timer 0/1 (default timer) */
-#define IRQ_PBX_TIMER2_3	(IRQ_PBX_GIC_START + 5)	/* Timer 2/3 */
-#define IRQ_PBX_GPIO0		(IRQ_PBX_GIC_START + 6)	/* GPIO 0 */
-#define IRQ_PBX_GPIO1		(IRQ_PBX_GIC_START + 7)	/* GPIO 1 */
-#define IRQ_PBX_GPIO2		(IRQ_PBX_GIC_START + 8)	/* GPIO 2 */
-								/* 9 reserved */
-#define IRQ_PBX_RTC		(IRQ_PBX_GIC_START + 10)	/* Real Time Clock */
-#define IRQ_PBX_SSP		(IRQ_PBX_GIC_START + 11)	/* Synchronous Serial Port */
-#define IRQ_PBX_UART0		(IRQ_PBX_GIC_START + 12)	/* UART 0 on development chip */
-#define IRQ_PBX_UART1		(IRQ_PBX_GIC_START + 13)	/* UART 1 on development chip */
-#define IRQ_PBX_UART2		(IRQ_PBX_GIC_START + 14)	/* UART 2 on development chip */
-#define IRQ_PBX_UART3		(IRQ_PBX_GIC_START + 15)	/* UART 3 on development chip */
-#define IRQ_PBX_SCI		(IRQ_PBX_GIC_START + 16)	/* Smart Card Interface */
-#define IRQ_PBX_MMCI0A		(IRQ_PBX_GIC_START + 17)	/* Multimedia Card 0A */
-#define IRQ_PBX_MMCI0B		(IRQ_PBX_GIC_START + 18)	/* Multimedia Card 0B */
-#define IRQ_PBX_AACI		(IRQ_PBX_GIC_START + 19)	/* Audio Codec */
-#define IRQ_PBX_KMI0		(IRQ_PBX_GIC_START + 20)	/* Keyboard/Mouse port 0 */
-#define IRQ_PBX_KMI1		(IRQ_PBX_GIC_START + 21)	/* Keyboard/Mouse port 1 */
-#define IRQ_PBX_CHARLCD		(IRQ_PBX_GIC_START + 22)	/* Character LCD */
-#define IRQ_PBX_CLCD		(IRQ_PBX_GIC_START + 23)	/* CLCD controller */
-#define IRQ_PBX_DMAC		(IRQ_PBX_GIC_START + 24)	/* DMA controller */
-#define IRQ_PBX_PWRFAIL		(IRQ_PBX_GIC_START + 25)	/* Power failure */
-#define IRQ_PBX_PISMO		(IRQ_PBX_GIC_START + 26)	/* PISMO interface */
-#define IRQ_PBX_DoC		(IRQ_PBX_GIC_START + 27)	/* Disk on Chip memory controller */
-#define IRQ_PBX_ETH		(IRQ_PBX_GIC_START + 28)	/* Ethernet controller */
-#define IRQ_PBX_USB		(IRQ_PBX_GIC_START + 29)	/* USB controller */
-#define IRQ_PBX_TSPEN		(IRQ_PBX_GIC_START + 30)	/* Touchscreen pen */
-#define IRQ_PBX_TSKPAD		(IRQ_PBX_GIC_START + 31)	/* Touchscreen keypad */
-
-#define IRQ_PBX_PMU_SCU0        (IRQ_PBX_GIC_START + 32)        /* SCU PMU Interrupts (11mp) */
-#define IRQ_PBX_PMU_SCU1        (IRQ_PBX_GIC_START + 33)
-#define IRQ_PBX_PMU_SCU2        (IRQ_PBX_GIC_START + 34)
-#define IRQ_PBX_PMU_SCU3        (IRQ_PBX_GIC_START + 35)
-#define IRQ_PBX_PMU_SCU4        (IRQ_PBX_GIC_START + 36)
-#define IRQ_PBX_PMU_SCU5        (IRQ_PBX_GIC_START + 37)
-#define IRQ_PBX_PMU_SCU6        (IRQ_PBX_GIC_START + 38)
-#define IRQ_PBX_PMU_SCU7        (IRQ_PBX_GIC_START + 39)
-
-#define IRQ_PBX_WATCHDOG1       (IRQ_PBX_GIC_START + 40)        /* Watchdog1 timer */
-#define IRQ_PBX_TIMER4_5        (IRQ_PBX_GIC_START + 41)        /* Timer 0/1 (default timer) */
-#define IRQ_PBX_TIMER6_7        (IRQ_PBX_GIC_START + 42)        /* Timer 2/3 */
-/* ... */
-#define IRQ_PBX_PMU_CPU0        (IRQ_PBX_GIC_START + 44)        /* CPU PMU Interrupts */
-#define IRQ_PBX_PMU_CPU1        (IRQ_PBX_GIC_START + 45)
-#define IRQ_PBX_PMU_CPU2        (IRQ_PBX_GIC_START + 46)
-#define IRQ_PBX_PMU_CPU3        (IRQ_PBX_GIC_START + 47)
-
-/* ... */
-#define IRQ_PBX_PCI0		(IRQ_PBX_GIC_START + 50)
-#define IRQ_PBX_PCI1		(IRQ_PBX_GIC_START + 51)
-#define IRQ_PBX_PCI2		(IRQ_PBX_GIC_START + 52)
-#define IRQ_PBX_PCI3		(IRQ_PBX_GIC_START + 53)
-
-#define IRQ_PBX_SMC		-1
-#define IRQ_PBX_SCTL		-1
-
-#endif	/* __MACH_IRQS_PBX_H */
diff --git a/arch/arm/mach-realview/platform.h b/arch/arm/mach-realview/platform.h
deleted file mode 100644
index 1112173..0000000
--- a/arch/arm/mach-realview/platform.h
+++ /dev/null
@@ -1,247 +0,0 @@
-/*
- * Copyright (c) ARM Limited 2003.  All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_PLATFORM_H
-#define __ASM_ARCH_PLATFORM_H
-
-/*
- * Memory definitions
- */
-#define REALVIEW_BOOT_ROM_LO          0x30000000		/* DoC Base (64Mb)...*/
-#define REALVIEW_BOOT_ROM_HI          0x30000000
-#define REALVIEW_BOOT_ROM_BASE        REALVIEW_BOOT_ROM_HI	 /*  Normal position */
-#define REALVIEW_BOOT_ROM_SIZE        SZ_64M
-
-#define REALVIEW_SSRAM_BASE           /* REALVIEW_SSMC_BASE ? */
-#define REALVIEW_SSRAM_SIZE           SZ_2M
-
-/* 
- *  SDRAM
- */
-#define REALVIEW_SDRAM_BASE           0x00000000
-
-/* 
- *  Logic expansion modules
- * 
- */
-
-
-/* ------------------------------------------------------------------------
- *  RealView Registers
- * ------------------------------------------------------------------------
- * 
- */
-#define REALVIEW_SYS_ID_OFFSET               0x00
-#define REALVIEW_SYS_SW_OFFSET               0x04
-#define REALVIEW_SYS_LED_OFFSET              0x08
-#define REALVIEW_SYS_OSC0_OFFSET             0x0C
-
-#define REALVIEW_SYS_OSC1_OFFSET             0x10
-#define REALVIEW_SYS_OSC2_OFFSET             0x14
-#define REALVIEW_SYS_OSC3_OFFSET             0x18
-#define REALVIEW_SYS_OSC4_OFFSET             0x1C	/* OSC1 for RealView/AB */
-
-#define REALVIEW_SYS_LOCK_OFFSET             0x20
-#define REALVIEW_SYS_100HZ_OFFSET            0x24
-#define REALVIEW_SYS_CFGDATA1_OFFSET         0x28
-#define REALVIEW_SYS_CFGDATA2_OFFSET         0x2C
-#define REALVIEW_SYS_FLAGS_OFFSET            0x30
-#define REALVIEW_SYS_FLAGSSET_OFFSET         0x30
-#define REALVIEW_SYS_FLAGSCLR_OFFSET         0x34
-#define REALVIEW_SYS_NVFLAGS_OFFSET          0x38
-#define REALVIEW_SYS_NVFLAGSSET_OFFSET       0x38
-#define REALVIEW_SYS_NVFLAGSCLR_OFFSET       0x3C
-#define REALVIEW_SYS_RESETCTL_OFFSET         0x40
-#define REALVIEW_SYS_PCICTL_OFFSET           0x44
-#define REALVIEW_SYS_MCI_OFFSET              0x48
-#define REALVIEW_SYS_FLASH_OFFSET            0x4C
-#define REALVIEW_SYS_CLCD_OFFSET             0x50
-#define REALVIEW_SYS_CLCDSER_OFFSET          0x54
-#define REALVIEW_SYS_BOOTCS_OFFSET           0x58
-#define REALVIEW_SYS_24MHz_OFFSET            0x5C
-#define REALVIEW_SYS_MISC_OFFSET             0x60
-#define REALVIEW_SYS_IOSEL_OFFSET            0x70
-#define REALVIEW_SYS_PROCID_OFFSET           0x84
-#define REALVIEW_SYS_TEST_OSC0_OFFSET        0xC0
-#define REALVIEW_SYS_TEST_OSC1_OFFSET        0xC4
-#define REALVIEW_SYS_TEST_OSC2_OFFSET        0xC8
-#define REALVIEW_SYS_TEST_OSC3_OFFSET        0xCC
-#define REALVIEW_SYS_TEST_OSC4_OFFSET        0xD0
-
-#define REALVIEW_SYS_BASE                    0x10000000
-#define REALVIEW_SYS_ID                      (REALVIEW_SYS_BASE + REALVIEW_SYS_ID_OFFSET)
-#define REALVIEW_SYS_SW                      (REALVIEW_SYS_BASE + REALVIEW_SYS_SW_OFFSET)
-#define REALVIEW_SYS_LED                     (REALVIEW_SYS_BASE + REALVIEW_SYS_LED_OFFSET)
-#define REALVIEW_SYS_OSC0                    (REALVIEW_SYS_BASE + REALVIEW_SYS_OSC0_OFFSET)
-#define REALVIEW_SYS_OSC1                    (REALVIEW_SYS_BASE + REALVIEW_SYS_OSC1_OFFSET)
-
-#define REALVIEW_SYS_LOCK                    (REALVIEW_SYS_BASE + REALVIEW_SYS_LOCK_OFFSET)
-#define REALVIEW_SYS_100HZ                   (REALVIEW_SYS_BASE + REALVIEW_SYS_100HZ_OFFSET)
-#define REALVIEW_SYS_CFGDATA1                (REALVIEW_SYS_BASE + REALVIEW_SYS_CFGDATA1_OFFSET)
-#define REALVIEW_SYS_CFGDATA2                (REALVIEW_SYS_BASE + REALVIEW_SYS_CFGDATA2_OFFSET)
-#define REALVIEW_SYS_FLAGS                   (REALVIEW_SYS_BASE + REALVIEW_SYS_FLAGS_OFFSET)
-#define REALVIEW_SYS_FLAGSSET                (REALVIEW_SYS_BASE + REALVIEW_SYS_FLAGSSET_OFFSET)
-#define REALVIEW_SYS_FLAGSCLR                (REALVIEW_SYS_BASE + REALVIEW_SYS_FLAGSCLR_OFFSET)
-#define REALVIEW_SYS_NVFLAGS                 (REALVIEW_SYS_BASE + REALVIEW_SYS_NVFLAGS_OFFSET)
-#define REALVIEW_SYS_NVFLAGSSET              (REALVIEW_SYS_BASE + REALVIEW_SYS_NVFLAGSSET_OFFSET)
-#define REALVIEW_SYS_NVFLAGSCLR              (REALVIEW_SYS_BASE + REALVIEW_SYS_NVFLAGSCLR_OFFSET)
-#define REALVIEW_SYS_RESETCTL                (REALVIEW_SYS_BASE + REALVIEW_SYS_RESETCTL_OFFSET)
-#define REALVIEW_SYS_PCICTL                  (REALVIEW_SYS_BASE + REALVIEW_SYS_PCICTL_OFFSET)
-#define REALVIEW_SYS_MCI                     (REALVIEW_SYS_BASE + REALVIEW_SYS_MCI_OFFSET)
-#define REALVIEW_SYS_FLASH                   (REALVIEW_SYS_BASE + REALVIEW_SYS_FLASH_OFFSET)
-#define REALVIEW_SYS_CLCD                    (REALVIEW_SYS_BASE + REALVIEW_SYS_CLCD_OFFSET)
-#define REALVIEW_SYS_CLCDSER                 (REALVIEW_SYS_BASE + REALVIEW_SYS_CLCDSER_OFFSET)
-#define REALVIEW_SYS_BOOTCS                  (REALVIEW_SYS_BASE + REALVIEW_SYS_BOOTCS_OFFSET)
-#define REALVIEW_SYS_24MHz                   (REALVIEW_SYS_BASE + REALVIEW_SYS_24MHz_OFFSET)
-#define REALVIEW_SYS_MISC                    (REALVIEW_SYS_BASE + REALVIEW_SYS_MISC_OFFSET)
-#define REALVIEW_SYS_IOSEL                   (REALVIEW_SYS_BASE + REALVIEW_SYS_IOSEL_OFFSET)
-#define REALVIEW_SYS_PROCID                  (REALVIEW_SYS_BASE + REALVIEW_SYS_PROCID_OFFSET)
-#define REALVIEW_SYS_TEST_OSC0               (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC0_OFFSET)
-#define REALVIEW_SYS_TEST_OSC1               (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC1_OFFSET)
-#define REALVIEW_SYS_TEST_OSC2               (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC2_OFFSET)
-#define REALVIEW_SYS_TEST_OSC3               (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC3_OFFSET)
-#define REALVIEW_SYS_TEST_OSC4               (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC4_OFFSET)
-
-/* ------------------------------------------------------------------------
- *  RealView control registers
- * ------------------------------------------------------------------------
- */
-
-/* 
- * REALVIEW_IDFIELD
- *
- * 31:24 = manufacturer (0x41 = ARM)
- * 23:16 = architecture (0x08 = AHB system bus, ASB processor bus)
- * 15:12 = FPGA (0x3 = XVC600 or XVC600E)
- * 11:4  = build value
- * 3:0   = revision number (0x1 = rev B (AHB))
- */
-
-/*
- * REALVIEW_SYS_LOCK
- *     control access to SYS_OSCx, SYS_CFGDATAx, SYS_RESETCTL, 
- *     SYS_CLD, SYS_BOOTCS
- */
-#define REALVIEW_SYS_LOCK_LOCKED    (1 << 16)
-#define REALVIEW_SYS_LOCK_VAL	0xA05F	       /* Enable write access */
-
-/*
- * REALVIEW_SYS_FLASH
- */
-#define REALVIEW_FLASHPROG_FLVPPEN	(1 << 0)	/* Enable writing to flash */
-
-/*
- * REALVIEW_INTREG
- *     - used to acknowledge and control MMCI and UART interrupts 
- */
-#define REALVIEW_INTREG_WPROT        0x00    /* MMC protection status (no interrupt generated) */
-#define REALVIEW_INTREG_RI0          0x01    /* Ring indicator UART0 is asserted,              */
-#define REALVIEW_INTREG_CARDIN       0x08    /* MMCI card in detect                            */
-                                                /* write 1 to acknowledge and clear               */
-#define REALVIEW_INTREG_RI1          0x02    /* Ring indicator UART1 is asserted,              */
-#define REALVIEW_INTREG_CARDINSERT   0x03    /* Signal insertion of MMC card                   */
-
-/*
- * RealView common peripheral addresses
- */
-#define REALVIEW_SCTL_BASE            0x10001000	/* System controller */
-#define REALVIEW_I2C_BASE             0x10002000	/* I2C control */
-#define REALVIEW_AACI_BASE            0x10004000	/* Audio */
-#define REALVIEW_MMCI0_BASE           0x10005000	/* MMC interface */
-#define REALVIEW_KMI0_BASE            0x10006000	/* KMI interface */
-#define REALVIEW_KMI1_BASE            0x10007000	/* KMI 2nd interface */
-#define REALVIEW_CHAR_LCD_BASE        0x10008000	/* Character LCD */
-#define REALVIEW_SCI_BASE             0x1000E000	/* Smart card controller */
-#define REALVIEW_GPIO1_BASE           0x10014000	/* GPIO port 1 */
-#define REALVIEW_GPIO2_BASE           0x10015000	/* GPIO port 2 */
-#define REALVIEW_DMC_BASE             0x10018000	/* DMC configuration */
-#define REALVIEW_DMAC_BASE            0x10030000	/* DMA controller */
-
-/* PCI space */
-#define REALVIEW_PCI_BASE             0x41000000	/* PCI Interface */
-#define REALVIEW_PCI_CFG_BASE	      0x42000000
-#define REALVIEW_PCI_MEM_BASE0        0x44000000
-#define REALVIEW_PCI_MEM_BASE1        0x50000000
-#define REALVIEW_PCI_MEM_BASE2        0x60000000
-/* Sizes of above maps */
-#define REALVIEW_PCI_BASE_SIZE	       0x01000000
-#define REALVIEW_PCI_CFG_BASE_SIZE    0x02000000
-#define REALVIEW_PCI_MEM_BASE0_SIZE   0x0c000000	/* 32Mb */
-#define REALVIEW_PCI_MEM_BASE1_SIZE   0x10000000	/* 256Mb */
-#define REALVIEW_PCI_MEM_BASE2_SIZE   0x10000000	/* 256Mb */
-
-#define REALVIEW_SDRAM67_BASE         0x70000000	/* SDRAM banks 6 and 7 */
-#define REALVIEW_LT_BASE              0x80000000	/* Logic Tile expansion */
-
-/*
- * CompactFlash
- */
-#define REALVIEW_CF_BASE		0x18000000	/* CompactFlash */
-#define REALVIEW_CF_MEM_BASE		0x18003000	/* SMC for CompactFlash */
-
-/*
- * Disk on Chip
- */
-#define REALVIEW_DOC_BASE             0x2C000000
-#define REALVIEW_DOC_SIZE             (16 << 20)
-#define REALVIEW_DOC_PAGE_SIZE        512
-#define REALVIEW_DOC_TOTAL_PAGES     (DOC_SIZE / PAGE_SIZE)
-
-#define ERASE_UNIT_PAGES    32
-#define START_PAGE          0x80
-
-/* 
- *  LED settings, bits [7:0]
- */
-#define REALVIEW_SYS_LED0             (1 << 0)
-#define REALVIEW_SYS_LED1             (1 << 1)
-#define REALVIEW_SYS_LED2             (1 << 2)
-#define REALVIEW_SYS_LED3             (1 << 3)
-#define REALVIEW_SYS_LED4             (1 << 4)
-#define REALVIEW_SYS_LED5             (1 << 5)
-#define REALVIEW_SYS_LED6             (1 << 6)
-#define REALVIEW_SYS_LED7             (1 << 7)
-
-#define ALL_LEDS                  0xFF
-
-#define LED_BANK                  REALVIEW_SYS_LED
-
-/* 
- * Control registers
- */
-#define REALVIEW_IDFIELD_OFFSET	0x0	/* RealView build information */
-#define REALVIEW_FLASHPROG_OFFSET	0x4	/* Flash devices */
-#define REALVIEW_INTREG_OFFSET		0x8	/* Interrupt control */
-#define REALVIEW_DECODE_OFFSET		0xC	/* Fitted logic modules */
-
-/*
- * System controller bit assignment
- */
-#define REALVIEW_REFCLK	0
-#define REALVIEW_TIMCLK	1
-
-#define REALVIEW_TIMER1_EnSel	15
-#define REALVIEW_TIMER2_EnSel	17
-#define REALVIEW_TIMER3_EnSel	19
-#define REALVIEW_TIMER4_EnSel	21
-
-
-#define REALVIEW_CSR_BASE             0x10000000
-#define REALVIEW_CSR_SIZE             0x10000000
-
-#endif	/* __ASM_ARCH_PLATFORM_H */
diff --git a/arch/arm/mach-realview/platsmp-dt.c b/arch/arm/mach-realview/platsmp-dt.c
index 6964e88..70ca99e 100644
--- a/arch/arm/mach-realview/platsmp-dt.c
+++ b/arch/arm/mach-realview/platsmp-dt.c
@@ -17,8 +17,7 @@
 #include <asm/smp_scu.h>
 
 #include <plat/platsmp.h>
-
-#include "core.h"
+#include "hotplug.h"
 
 #define REALVIEW_SYS_FLAGSSET_OFFSET	0x30
 
diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c
deleted file mode 100644
index e8ab69c..0000000
--- a/arch/arm/mach-realview/platsmp.c
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- *  linux/arch/arm/mach-realview/platsmp.c
- *
- *  Copyright (C) 2002 ARM Ltd.
- *  All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/smp.h>
-#include <linux/io.h>
-
-#include "hardware.h"
-#include <asm/mach-types.h>
-#include <asm/smp_scu.h>
-
-#include "board-eb.h"
-#include "board-pb11mp.h"
-#include "board-pbx.h"
-
-#include <plat/platsmp.h>
-
-#include "core.h"
-
-static void __iomem *scu_base_addr(void)
-{
-	if (machine_is_realview_eb_mp())
-		return __io_address(REALVIEW_EB11MP_SCU_BASE);
-	else if (machine_is_realview_pb11mp())
-		return __io_address(REALVIEW_TC11MP_SCU_BASE);
-	else if (machine_is_realview_pbx() &&
-		 (core_tile_pbx11mp() || core_tile_pbxa9mp()))
-		return __io_address(REALVIEW_PBX_TILE_SCU_BASE);
-	else
-		return (void __iomem *)0;
-}
-
-/*
- * Initialise the CPU possible map early - this describes the CPUs
- * which may be present or become present in the system.
- */
-static void __init realview_smp_init_cpus(void)
-{
-	void __iomem *scu_base = scu_base_addr();
-	unsigned int i, ncores;
-
-	ncores = scu_base ? scu_get_core_count(scu_base) : 1;
-
-	/* sanity check */
-	if (ncores > nr_cpu_ids) {
-		pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
-			ncores, nr_cpu_ids);
-		ncores = nr_cpu_ids;
-	}
-
-	for (i = 0; i < ncores; i++)
-		set_cpu_possible(i, true);
-}
-
-static void __init realview_smp_prepare_cpus(unsigned int max_cpus)
-{
-
-	scu_enable(scu_base_addr());
-
-	/*
-	 * Write the address of secondary startup into the
-	 * system-wide flags register. The BootMonitor waits
-	 * until it receives a soft interrupt, and then the
-	 * secondary CPU branches to this address.
-	 */
-	__raw_writel(virt_to_phys(versatile_secondary_startup),
-		     __io_address(REALVIEW_SYS_FLAGSSET));
-}
-
-const struct smp_operations realview_smp_ops __initconst = {
-	.smp_init_cpus		= realview_smp_init_cpus,
-	.smp_prepare_cpus	= realview_smp_prepare_cpus,
-	.smp_secondary_init	= versatile_secondary_init,
-	.smp_boot_secondary	= versatile_boot_secondary,
-#ifdef CONFIG_HOTPLUG_CPU
-	.cpu_die		= realview_cpu_die,
-#endif
-};
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
deleted file mode 100644
index b442fa6..0000000
--- a/arch/arm/mach-realview/realview_eb.c
+++ /dev/null
@@ -1,492 +0,0 @@
-/*
- *  linux/arch/arm/mach-realview/realview_eb.c
- *
- *  Copyright (C) 2004 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/device.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/pl061.h>
-#include <linux/amba/mmci.h>
-#include <linux/amba/pl022.h>
-#include <linux/io.h>
-#include <linux/irqchip/arm-gic.h>
-#include <linux/platform_data/clk-realview.h>
-#include <linux/reboot.h>
-
-#include "hardware.h"
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-#include <asm/pgtable.h>
-#include <asm/hardware/cache-l2x0.h>
-#include <asm/smp_twd.h>
-#include <asm/system_info.h>
-#include <asm/outercache.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-
-#include "board-eb.h"
-#include "irqs-eb.h"
-
-#include "core.h"
-
-static struct map_desc realview_eb_io_desc[] __initdata = {
-	{
-		.virtual	= IO_ADDRESS(REALVIEW_SYS_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_SYS_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_EB_GIC_CPU_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_EB_GIC_CPU_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_EB_GIC_DIST_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_EB_GIC_DIST_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_SCTL_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_SCTL_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_EB_TIMER0_1_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_EB_TIMER0_1_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_EB_TIMER2_3_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_EB_TIMER2_3_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	},
-#ifdef CONFIG_DEBUG_LL
-	{
-		.virtual	= IO_ADDRESS(REALVIEW_EB_UART0_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_EB_UART0_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}
-#endif
-};
-
-static struct map_desc realview_eb11mp_io_desc[] __initdata = {
-	{
-		.virtual	= IO_ADDRESS(REALVIEW_EB11MP_PRIV_MEM_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_EB11MP_PRIV_MEM_BASE),
-		.length		= REALVIEW_EB11MP_PRIV_MEM_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_EB11MP_L220_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_EB11MP_L220_BASE),
-		.length		= SZ_8K,
-		.type		= MT_DEVICE,
-	}
-};
-
-static void __init realview_eb_map_io(void)
-{
-	iotable_init(realview_eb_io_desc, ARRAY_SIZE(realview_eb_io_desc));
-	if (core_tile_eb11mp() || core_tile_a9mp())
-		iotable_init(realview_eb11mp_io_desc, ARRAY_SIZE(realview_eb11mp_io_desc));
-}
-
-static struct pl061_platform_data gpio0_plat_data = {
-	.gpio_base	= 0,
-};
-
-static struct pl061_platform_data gpio1_plat_data = {
-	.gpio_base	= 8,
-};
-
-static struct pl061_platform_data gpio2_plat_data = {
-	.gpio_base	= 16,
-};
-
-static struct pl022_ssp_controller ssp0_plat_data = {
-	.bus_id = 0,
-	.enable_dma = 0,
-	.num_chipselect = 1,
-};
-
-/*
- * RealView EB AMBA devices
- */
-
-/*
- * These devices are connected via the core APB bridge
- */
-#define GPIO2_IRQ	{ IRQ_EB_GPIO2 }
-#define GPIO3_IRQ	{ IRQ_EB_GPIO3 }
-
-#define AACI_IRQ	{ IRQ_EB_AACI }
-#define MMCI0_IRQ	{ IRQ_EB_MMCI0A, IRQ_EB_MMCI0B }
-#define KMI0_IRQ	{ IRQ_EB_KMI0 }
-#define KMI1_IRQ	{ IRQ_EB_KMI1 }
-
-/*
- * These devices are connected directly to the multi-layer AHB switch
- */
-#define EB_SMC_IRQ	{ }
-#define MPMC_IRQ	{ }
-#define EB_CLCD_IRQ	{ IRQ_EB_CLCD }
-#define DMAC_IRQ	{ IRQ_EB_DMA }
-
-/*
- * These devices are connected via the core APB bridge
- */
-#define SCTL_IRQ	{ }
-#define EB_WATCHDOG_IRQ	{ IRQ_EB_WDOG }
-#define EB_GPIO0_IRQ	{ IRQ_EB_GPIO0 }
-#define GPIO1_IRQ	{ IRQ_EB_GPIO1 }
-#define EB_RTC_IRQ	{ IRQ_EB_RTC }
-
-/*
- * These devices are connected via the DMA APB bridge
- */
-#define SCI_IRQ		{ IRQ_EB_SCI }
-#define EB_UART0_IRQ	{ IRQ_EB_UART0 }
-#define EB_UART1_IRQ	{ IRQ_EB_UART1 }
-#define EB_UART2_IRQ	{ IRQ_EB_UART2 }
-#define EB_UART3_IRQ	{ IRQ_EB_UART3 }
-#define EB_SSP_IRQ	{ IRQ_EB_SSP }
-
-/* FPGA Primecells */
-APB_DEVICE(aaci,  "fpga:aaci",  AACI,     NULL);
-APB_DEVICE(mmc0,  "fpga:mmc0",  MMCI0,    &realview_mmc0_plat_data);
-APB_DEVICE(kmi0,  "fpga:kmi0",  KMI0,     NULL);
-APB_DEVICE(kmi1,  "fpga:kmi1",  KMI1,     NULL);
-APB_DEVICE(uart3, "fpga:uart3", EB_UART3, NULL);
-
-/* DevChip Primecells */
-AHB_DEVICE(smc,   "dev:smc",   EB_SMC,   NULL);
-AHB_DEVICE(clcd,  "dev:clcd",  EB_CLCD,  &clcd_plat_data);
-AHB_DEVICE(dmac,  "dev:dmac",  DMAC,     NULL);
-AHB_DEVICE(sctl,  "dev:sctl",  SCTL,     NULL);
-APB_DEVICE(wdog,  "dev:wdog",  EB_WATCHDOG, NULL);
-APB_DEVICE(gpio0, "dev:gpio0", EB_GPIO0, &gpio0_plat_data);
-APB_DEVICE(gpio1, "dev:gpio1", GPIO1,    &gpio1_plat_data);
-APB_DEVICE(gpio2, "dev:gpio2", GPIO2,    &gpio2_plat_data);
-APB_DEVICE(rtc,   "dev:rtc",   EB_RTC,   NULL);
-APB_DEVICE(sci0,  "dev:sci0",  SCI,      NULL);
-APB_DEVICE(uart0, "dev:uart0", EB_UART0, NULL);
-APB_DEVICE(uart1, "dev:uart1", EB_UART1, NULL);
-APB_DEVICE(uart2, "dev:uart2", EB_UART2, NULL);
-APB_DEVICE(ssp0,  "dev:ssp0",  EB_SSP,   &ssp0_plat_data);
-
-static struct amba_device *amba_devs[] __initdata = {
-	&dmac_device,
-	&uart0_device,
-	&uart1_device,
-	&uart2_device,
-	&uart3_device,
-	&smc_device,
-	&clcd_device,
-	&sctl_device,
-	&wdog_device,
-	&gpio0_device,
-	&gpio1_device,
-	&gpio2_device,
-	&rtc_device,
-	&sci0_device,
-	&ssp0_device,
-	&aaci_device,
-	&mmc0_device,
-	&kmi0_device,
-	&kmi1_device,
-};
-
-/*
- * RealView EB platform devices
- */
-static struct resource realview_eb_flash_resource = {
-	.start			= REALVIEW_EB_FLASH_BASE,
-	.end			= REALVIEW_EB_FLASH_BASE + REALVIEW_EB_FLASH_SIZE - 1,
-	.flags			= IORESOURCE_MEM,
-};
-
-static struct resource realview_eb_eth_resources[] = {
-	[0] = {
-		.start		= REALVIEW_EB_ETH_BASE,
-		.end		= REALVIEW_EB_ETH_BASE + SZ_64K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= IRQ_EB_ETH,
-		.end		= IRQ_EB_ETH,
-		.flags		= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	},
-};
-
-/*
- * Detect and register the correct Ethernet device. RealView/EB rev D
- * platforms use the newer SMSC LAN9118 Ethernet chip
- */
-static int eth_device_register(void)
-{
-	void __iomem *eth_addr = ioremap(REALVIEW_EB_ETH_BASE, SZ_4K);
-	const char *name = NULL;
-	u32 idrev;
-
-	if (!eth_addr)
-		return -ENOMEM;
-
-	idrev = readl(eth_addr + 0x50);
-	if ((idrev & 0xFFFF0000) != 0x01180000)
-		/* SMSC LAN9118 not present, use LAN91C111 instead */
-		name = "smc91x";
-
-	iounmap(eth_addr);
-	return realview_eth_register(name, realview_eb_eth_resources);
-}
-
-static struct resource realview_eb_isp1761_resources[] = {
-	[0] = {
-		.start		= REALVIEW_EB_USB_BASE,
-		.end		= REALVIEW_EB_USB_BASE + SZ_128K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= IRQ_EB_USB,
-		.end		= IRQ_EB_USB,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource pmu_resources[] = {
-	[0] = {
-		.start		= IRQ_EB11MP_PMU_CPU0,
-		.end		= IRQ_EB11MP_PMU_CPU0,
-		.flags		= IORESOURCE_IRQ,
-	},
-	[1] = {
-		.start		= IRQ_EB11MP_PMU_CPU1,
-		.end		= IRQ_EB11MP_PMU_CPU1,
-		.flags		= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start		= IRQ_EB11MP_PMU_CPU2,
-		.end		= IRQ_EB11MP_PMU_CPU2,
-		.flags		= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start		= IRQ_EB11MP_PMU_CPU3,
-		.end		= IRQ_EB11MP_PMU_CPU3,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device pmu_device = {
-	.id			= -1,
-	.num_resources		= ARRAY_SIZE(pmu_resources),
-	.resource		= pmu_resources,
-};
-
-static struct resource char_lcd_resources[] = {
-	{
-		.start = REALVIEW_CHAR_LCD_BASE,
-		.end   = (REALVIEW_CHAR_LCD_BASE + SZ_4K - 1),
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start	= IRQ_EB_CHARLCD,
-		.end	= IRQ_EB_CHARLCD,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device char_lcd_device = {
-	.name		=	"arm-charlcd",
-	.id		=	-1,
-	.num_resources	=	ARRAY_SIZE(char_lcd_resources),
-	.resource	=	char_lcd_resources,
-};
-
-static void __init gic_init_irq(void)
-{
-	if (core_tile_eb11mp() || core_tile_a9mp()) {
-		unsigned int pldctrl;
-
-		/* new irq mode */
-		writel(0x0000a05f, __io_address(REALVIEW_SYS_LOCK));
-		pldctrl = readl(__io_address(REALVIEW_SYS_BASE)	+ REALVIEW_EB11MP_SYS_PLD_CTRL1);
-		pldctrl |= 0x00800000;
-		writel(pldctrl, __io_address(REALVIEW_SYS_BASE) + REALVIEW_EB11MP_SYS_PLD_CTRL1);
-		writel(0x00000000, __io_address(REALVIEW_SYS_LOCK));
-
-		/* core tile GIC, primary */
-		gic_init(0, 29, __io_address(REALVIEW_EB11MP_GIC_DIST_BASE),
-			 __io_address(REALVIEW_EB11MP_GIC_CPU_BASE));
-
-#ifndef CONFIG_REALVIEW_EB_ARM11MP_REVB
-		/* board GIC, secondary */
-		gic_init(1, 96, __io_address(REALVIEW_EB_GIC_DIST_BASE),
-			 __io_address(REALVIEW_EB_GIC_CPU_BASE));
-		gic_cascade_irq(1, IRQ_EB11MP_EB_IRQ1);
-#endif
-	} else {
-		/* board GIC, primary */
-		gic_init(0, 29, __io_address(REALVIEW_EB_GIC_DIST_BASE),
-			 __io_address(REALVIEW_EB_GIC_CPU_BASE));
-	}
-}
-
-/*
- * Fix up the IRQ numbers for the RealView EB/ARM11MPCore tile
- */
-static void realview_eb11mp_fixup(void)
-{
-	/* AMBA devices */
-	dmac_device.irq[0]	= IRQ_EB11MP_DMA;
-	uart0_device.irq[0]	= IRQ_EB11MP_UART0;
-	uart1_device.irq[0]	= IRQ_EB11MP_UART1;
-	uart2_device.irq[0]	= IRQ_EB11MP_UART2;
-	uart3_device.irq[0]	= IRQ_EB11MP_UART3;
-	clcd_device.irq[0]	= IRQ_EB11MP_CLCD;
-	wdog_device.irq[0]	= IRQ_EB11MP_WDOG;
-	gpio0_device.irq[0]	= IRQ_EB11MP_GPIO0;
-	gpio1_device.irq[0]	= IRQ_EB11MP_GPIO1;
-	gpio2_device.irq[0]	= IRQ_EB11MP_GPIO2;
-	rtc_device.irq[0]	= IRQ_EB11MP_RTC;
-	sci0_device.irq[0]	= IRQ_EB11MP_SCI;
-	ssp0_device.irq[0]	= IRQ_EB11MP_SSP;
-	aaci_device.irq[0]	= IRQ_EB11MP_AACI;
-	mmc0_device.irq[0]	= IRQ_EB11MP_MMCI0A;
-	mmc0_device.irq[1]	= IRQ_EB11MP_MMCI0B;
-	kmi0_device.irq[0]	= IRQ_EB11MP_KMI0;
-	kmi1_device.irq[0]	= IRQ_EB11MP_KMI1;
-
-	/* platform devices */
-	realview_eb_eth_resources[1].start	= IRQ_EB11MP_ETH;
-	realview_eb_eth_resources[1].end	= IRQ_EB11MP_ETH;
-	realview_eb_isp1761_resources[1].start	= IRQ_EB11MP_USB;
-	realview_eb_isp1761_resources[1].end	= IRQ_EB11MP_USB;
-}
-
-#ifdef CONFIG_HAVE_ARM_TWD
-static DEFINE_TWD_LOCAL_TIMER(twd_local_timer,
-			      REALVIEW_EB11MP_TWD_BASE,
-			      IRQ_LOCALTIMER);
-
-static void __init realview_eb_twd_init(void)
-{
-	if (core_tile_eb11mp() || core_tile_a9mp()) {
-		int err = twd_local_timer_register(&twd_local_timer);
-		if (err)
-			pr_err("twd_local_timer_register failed %d\n", err);
-	}
-}
-#else
-#define realview_eb_twd_init()	do { } while(0)
-#endif
-
-static void __init realview_eb_timer_init(void)
-{
-	unsigned int timer_irq;
-
-	timer0_va_base = __io_address(REALVIEW_EB_TIMER0_1_BASE);
-	timer1_va_base = __io_address(REALVIEW_EB_TIMER0_1_BASE) + 0x20;
-	timer2_va_base = __io_address(REALVIEW_EB_TIMER2_3_BASE);
-	timer3_va_base = __io_address(REALVIEW_EB_TIMER2_3_BASE) + 0x20;
-
-	if (core_tile_eb11mp() || core_tile_a9mp())
-		timer_irq = IRQ_EB11MP_TIMER0_1;
-	else
-		timer_irq = IRQ_EB_TIMER0_1;
-
-	realview_clk_init(__io_address(REALVIEW_SYS_BASE), false);
-	realview_timer_init(timer_irq);
-	realview_eb_twd_init();
-}
-
-static void realview_eb_restart(enum reboot_mode mode, const char *cmd)
-{
-	void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
-	void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK);
-
-	/*
-	 * To reset, we hit the on-board reset register
-	 * in the system FPGA
-	 */
-	__raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
-	if (core_tile_eb11mp())
-		__raw_writel(0x0008, reset_ctrl);
-	dsb();
-}
-
-static void __init realview_eb_init(void)
-{
-	int i;
-
-	if (core_tile_eb11mp() || core_tile_a9mp()) {
-		realview_eb11mp_fixup();
-
-#ifdef CONFIG_CACHE_L2X0
-		/*
-		 * The PL220 needs to be manually configured as the hardware
-		 * doesn't report the correct sizes.
-		 * 1MB (128KB/way), 8-way associativity, event monitor and
-		 * parity enabled, ignore share bit, no force write allocate
-		 * Bits:  .... ...0 0111 1001 0000 .... .... ....
-		 */
-		l2x0_init(__io_address(REALVIEW_EB11MP_L220_BASE), 0x00790000, 0xfe000fff);
-
-		/*
-		 * due to a bug in the l220 cache controller, we must not call
-		 * the sync function. stub it out here instead!
-		 */
-		outer_cache.sync = NULL;
-#endif
-		pmu_device.name = core_tile_a9mp() ? "armv7-pmu" : "armv6-pmu";
-		platform_device_register(&pmu_device);
-	}
-
-	realview_flash_register(&realview_eb_flash_resource, 1);
-	platform_device_register(&realview_i2c_device);
-	platform_device_register(&char_lcd_device);
-	platform_device_register(&realview_leds_device);
-	eth_device_register();
-	realview_usb_register(realview_eb_isp1761_resources);
-
-	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
-		struct amba_device *d = amba_devs[i];
-		amba_device_register(d, &iomem_resource);
-	}
-}
-
-MACHINE_START(REALVIEW_EB, "ARM-RealView EB")
-	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.atag_offset	= 0x100,
-	.smp		= smp_ops(realview_smp_ops),
-	.fixup		= realview_fixup,
-	.map_io		= realview_eb_map_io,
-	.init_early	= realview_init_early,
-	.init_irq	= gic_init_irq,
-	.init_time	= realview_eb_timer_init,
-	.init_machine	= realview_eb_init,
-#ifdef CONFIG_ZONE_DMA
-	.dma_zone_size	= SZ_256M,
-#endif
-	.restart	= realview_eb_restart,
-MACHINE_END
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
deleted file mode 100644
index 537f387..0000000
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ /dev/null
@@ -1,395 +0,0 @@
-/*
- *  linux/arch/arm/mach-realview/realview_pb1176.c
- *
- *  Copyright (C) 2008 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/device.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/pl061.h>
-#include <linux/amba/mmci.h>
-#include <linux/amba/pl022.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/partitions.h>
-#include <linux/io.h>
-#include <linux/irqchip/arm-gic.h>
-#include <linux/platform_data/clk-realview.h>
-#include <linux/reboot.h>
-#include <linux/memblock.h>
-
-#include "hardware.h"
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-#include <asm/pgtable.h>
-#include <asm/hardware/cache-l2x0.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-
-#include "board-pb1176.h"
-#include "irqs-pb1176.h"
-
-#include "core.h"
-
-static struct map_desc realview_pb1176_io_desc[] __initdata = {
-	{
-		.virtual	= IO_ADDRESS(REALVIEW_SYS_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_SYS_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_PB1176_GIC_CPU_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PB1176_GIC_CPU_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_PB1176_GIC_DIST_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PB1176_GIC_DIST_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_DC1176_GIC_CPU_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_DC1176_GIC_CPU_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_DC1176_GIC_DIST_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_DC1176_GIC_DIST_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_SCTL_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_SCTL_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_PB1176_TIMER0_1_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PB1176_TIMER0_1_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_PB1176_TIMER2_3_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PB1176_TIMER2_3_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_PB1176_L220_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PB1176_L220_BASE),
-		.length		= SZ_8K,
-		.type		= MT_DEVICE,
-	},
-#ifdef CONFIG_DEBUG_LL
-	{
-		.virtual	= IO_ADDRESS(REALVIEW_PB1176_UART0_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PB1176_UART0_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	},
-#endif
-};
-
-static void __init realview_pb1176_map_io(void)
-{
-	iotable_init(realview_pb1176_io_desc, ARRAY_SIZE(realview_pb1176_io_desc));
-}
-
-static struct pl061_platform_data gpio0_plat_data = {
-	.gpio_base	= 0,
-};
-
-static struct pl061_platform_data gpio1_plat_data = {
-	.gpio_base	= 8,
-};
-
-static struct pl061_platform_data gpio2_plat_data = {
-	.gpio_base	= 16,
-};
-
-static struct pl022_ssp_controller ssp0_plat_data = {
-	.bus_id = 0,
-	.enable_dma = 0,
-	.num_chipselect = 1,
-};
-
-/*
- * RealView PB1176 AMBA devices
- */
-#define GPIO2_IRQ	{ IRQ_PB1176_GPIO2 }
-#define GPIO3_IRQ	{ IRQ_PB1176_GPIO3 }
-#define AACI_IRQ	{ IRQ_PB1176_AACI }
-#define MMCI0_IRQ	{ IRQ_PB1176_MMCI0A, IRQ_PB1176_MMCI0B }
-#define KMI0_IRQ	{ IRQ_PB1176_KMI0 }
-#define KMI1_IRQ	{ IRQ_PB1176_KMI1 }
-#define PB1176_SMC_IRQ	{ }
-#define MPMC_IRQ	{ }
-#define PB1176_CLCD_IRQ	{ IRQ_DC1176_CLCD }
-#define SCTL_IRQ	{ }
-#define PB1176_WATCHDOG_IRQ	{ IRQ_DC1176_WATCHDOG }
-#define PB1176_GPIO0_IRQ	{ IRQ_DC1176_GPIO0 }
-#define GPIO1_IRQ	{ IRQ_PB1176_GPIO1 }
-#define PB1176_RTC_IRQ	{ IRQ_DC1176_RTC }
-#define SCI_IRQ		{ IRQ_PB1176_SCI }
-#define PB1176_UART0_IRQ	{ IRQ_DC1176_UART0 }
-#define PB1176_UART1_IRQ	{ IRQ_DC1176_UART1 }
-#define PB1176_UART2_IRQ	{ IRQ_DC1176_UART2 }
-#define PB1176_UART3_IRQ	{ IRQ_DC1176_UART3 }
-#define PB1176_UART4_IRQ	{ IRQ_PB1176_UART4 }
-#define PB1176_SSP_IRQ		{ IRQ_DC1176_SSP }
-
-/* FPGA Primecells */
-APB_DEVICE(aaci,	"fpga:aaci",	AACI,		NULL);
-APB_DEVICE(mmc0,	"fpga:mmc0",	MMCI0,		&realview_mmc0_plat_data);
-APB_DEVICE(kmi0,	"fpga:kmi0",	KMI0,		NULL);
-APB_DEVICE(kmi1,	"fpga:kmi1",	KMI1,		NULL);
-APB_DEVICE(uart4,	"fpga:uart4",	PB1176_UART4,	NULL);
-
-/* DevChip Primecells */
-AHB_DEVICE(smc,		"dev:smc",	PB1176_SMC,	NULL);
-AHB_DEVICE(sctl,	"dev:sctl",	SCTL,		NULL);
-APB_DEVICE(wdog,	"dev:wdog",	PB1176_WATCHDOG,	NULL);
-APB_DEVICE(gpio0,	"dev:gpio0",	PB1176_GPIO0,	&gpio0_plat_data);
-APB_DEVICE(gpio1,	"dev:gpio1",	GPIO1,		&gpio1_plat_data);
-APB_DEVICE(gpio2,	"dev:gpio2",	GPIO2,		&gpio2_plat_data);
-APB_DEVICE(rtc,		"dev:rtc",	PB1176_RTC,	NULL);
-APB_DEVICE(sci0,	"dev:sci0",	SCI,		NULL);
-APB_DEVICE(uart0,	"dev:uart0",	PB1176_UART0,	NULL);
-APB_DEVICE(uart1,	"dev:uart1",	PB1176_UART1,	NULL);
-APB_DEVICE(uart2,	"dev:uart2",	PB1176_UART2,	NULL);
-APB_DEVICE(uart3,	"dev:uart3",	PB1176_UART3,	NULL);
-APB_DEVICE(ssp0,	"dev:ssp0",	PB1176_SSP,	&ssp0_plat_data);
-AHB_DEVICE(clcd,	"dev:clcd",	PB1176_CLCD,	&clcd_plat_data);
-
-static struct amba_device *amba_devs[] __initdata = {
-	&uart0_device,
-	&uart1_device,
-	&uart2_device,
-	&uart3_device,
-	&uart4_device,
-	&smc_device,
-	&clcd_device,
-	&sctl_device,
-	&wdog_device,
-	&gpio0_device,
-	&gpio1_device,
-	&gpio2_device,
-	&rtc_device,
-	&sci0_device,
-	&ssp0_device,
-	&aaci_device,
-	&mmc0_device,
-	&kmi0_device,
-	&kmi1_device,
-};
-
-/*
- * RealView PB1176 platform devices
- */
-static struct resource realview_pb1176_flash_resources[] = {
-	{
-		.start		= REALVIEW_PB1176_FLASH_BASE,
-		.end		= REALVIEW_PB1176_FLASH_BASE + REALVIEW_PB1176_FLASH_SIZE - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-#ifdef CONFIG_REALVIEW_PB1176_SECURE_FLASH
-	{
-		.start		= REALVIEW_PB1176_SEC_FLASH_BASE,
-		.end		= REALVIEW_PB1176_SEC_FLASH_BASE + REALVIEW_PB1176_SEC_FLASH_SIZE - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-#endif
-};
-
-static struct physmap_flash_data pb1176_rom_pdata = {
-	.probe_type	= "map_rom",
-	.width		= 4,
-	.nr_parts	= 0,
-};
-
-static struct resource pb1176_rom_resources[] = {
-	/*
-	 * This exposes the PB1176 DevChip ROM as an MTD ROM mapping.
-	 * The reference manual states that this is actually a pseudo-ROM
-	 * programmed in NVRAM.
-	 */
-	{
-		.start		= REALVIEW_DC1176_ROM_BASE,
-		.end		= REALVIEW_DC1176_ROM_BASE + SZ_16K - 1,
-		.flags		= IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device pb1176_rom_device = {
-	.name		= "physmap-flash",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(pb1176_rom_resources),
-	.resource	= pb1176_rom_resources,
-	.dev = {
-		.platform_data = &pb1176_rom_pdata,
-	},
-};
-
-static struct resource realview_pb1176_smsc911x_resources[] = {
-	[0] = {
-		.start		= REALVIEW_PB1176_ETH_BASE,
-		.end		= REALVIEW_PB1176_ETH_BASE + SZ_64K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= IRQ_PB1176_ETH,
-		.end		= IRQ_PB1176_ETH,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource realview_pb1176_isp1761_resources[] = {
-	[0] = {
-		.start		= REALVIEW_PB1176_USB_BASE,
-		.end		= REALVIEW_PB1176_USB_BASE + SZ_128K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= IRQ_PB1176_USB,
-		.end		= IRQ_PB1176_USB,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource pmu_resource = {
-	.start		= IRQ_DC1176_CORE_PMU,
-	.end		= IRQ_DC1176_CORE_PMU,
-	.flags		= IORESOURCE_IRQ,
-};
-
-static struct platform_device pmu_device = {
-	.name			= "armv6-pmu",
-	.id			= -1,
-	.num_resources		= 1,
-	.resource		= &pmu_resource,
-};
-
-static struct resource char_lcd_resources[] = {
-	{
-		.start = REALVIEW_CHAR_LCD_BASE,
-		.end   = (REALVIEW_CHAR_LCD_BASE + SZ_4K - 1),
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start	= IRQ_PB1176_CHARLCD,
-		.end	= IRQ_PB1176_CHARLCD,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device char_lcd_device = {
-	.name		=	"arm-charlcd",
-	.id		=	-1,
-	.num_resources	=	ARRAY_SIZE(char_lcd_resources),
-	.resource	=	char_lcd_resources,
-};
-
-static void __init gic_init_irq(void)
-{
-	/* ARM1176 DevChip GIC, primary */
-	gic_init(0, IRQ_DC1176_GIC_START,
-		 __io_address(REALVIEW_DC1176_GIC_DIST_BASE),
-		 __io_address(REALVIEW_DC1176_GIC_CPU_BASE));
-
-	/* board GIC, secondary */
-	gic_init(1, IRQ_PB1176_GIC_START,
-		 __io_address(REALVIEW_PB1176_GIC_DIST_BASE),
-		 __io_address(REALVIEW_PB1176_GIC_CPU_BASE));
-	gic_cascade_irq(1, IRQ_DC1176_PB_IRQ1);
-}
-
-static void __init realview_pb1176_timer_init(void)
-{
-	timer0_va_base = __io_address(REALVIEW_PB1176_TIMER0_1_BASE);
-	timer1_va_base = __io_address(REALVIEW_PB1176_TIMER0_1_BASE) + 0x20;
-	timer2_va_base = __io_address(REALVIEW_PB1176_TIMER2_3_BASE);
-	timer3_va_base = __io_address(REALVIEW_PB1176_TIMER2_3_BASE) + 0x20;
-
-	realview_clk_init(__io_address(REALVIEW_SYS_BASE), true);
-	realview_timer_init(IRQ_DC1176_TIMER0);
-}
-
-static void realview_pb1176_restart(enum reboot_mode mode, const char *cmd)
-{
-	void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
-	void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK);
-	__raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
-	__raw_writel(REALVIEW_PB1176_SYS_SOFT_RESET, reset_ctrl);
-	dsb();
-}
-
-static void realview_pb1176_fixup(struct tag *tags, char **from)
-{
-	/*
-	 * RealView PB1176 only has 128MB of RAM mapped at 0.
-	 */
-	memblock_add(0, SZ_128M);
-}
-
-static void __init realview_pb1176_init(void)
-{
-	int i;
-
-#ifdef CONFIG_CACHE_L2X0
-	/*
-	 * The PL220 needs to be manually configured as the hardware
-	 * doesn't report the correct sizes.
-	 * 128kB (16kB/way), 8-way associativity, event monitor and
-	 * parity enabled, ignore share bit, no force write allocate
-	 * Bits:  .... ...0 0111 0011 0000 .... .... ....
-	 */
-	l2x0_init(__io_address(REALVIEW_PB1176_L220_BASE), 0x00730000, 0xfe000fff);
-#endif
-
-	realview_flash_register(realview_pb1176_flash_resources,
-				ARRAY_SIZE(realview_pb1176_flash_resources));
-	platform_device_register(&pb1176_rom_device);
-	realview_eth_register(NULL, realview_pb1176_smsc911x_resources);
-	platform_device_register(&realview_i2c_device);
-	realview_usb_register(realview_pb1176_isp1761_resources);
-	platform_device_register(&pmu_device);
-	platform_device_register(&char_lcd_device);
-	platform_device_register(&realview_leds_device);
-
-	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
-		struct amba_device *d = amba_devs[i];
-		amba_device_register(d, &iomem_resource);
-	}
-}
-
-MACHINE_START(REALVIEW_PB1176, "ARM-RealView PB1176")
-	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.atag_offset	= 0x100,
-	.fixup		= realview_pb1176_fixup,
-	.map_io		= realview_pb1176_map_io,
-	.init_early	= realview_init_early,
-	.init_irq	= gic_init_irq,
-	.init_time	= realview_pb1176_timer_init,
-	.init_machine	= realview_pb1176_init,
-#ifdef CONFIG_ZONE_DMA
-	.dma_zone_size	= SZ_256M,
-#endif
-	.restart	= realview_pb1176_restart,
-MACHINE_END
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
deleted file mode 100644
index a90a075..0000000
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ /dev/null
@@ -1,385 +0,0 @@
-/*
- *  linux/arch/arm/mach-realview/realview_pb11mp.c
- *
- *  Copyright (C) 2008 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/device.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/pl061.h>
-#include <linux/amba/mmci.h>
-#include <linux/amba/pl022.h>
-#include <linux/io.h>
-#include <linux/irqchip/arm-gic.h>
-#include <linux/platform_data/clk-realview.h>
-#include <linux/reboot.h>
-
-#include "hardware.h"
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-#include <asm/pgtable.h>
-#include <asm/hardware/cache-l2x0.h>
-#include <asm/smp_twd.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-#include <asm/outercache.h>
-
-#include "board-pb11mp.h"
-#include "irqs-pb11mp.h"
-
-#include "core.h"
-
-static struct map_desc realview_pb11mp_io_desc[] __initdata = {
-	{
-		.virtual	= IO_ADDRESS(REALVIEW_SYS_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_SYS_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_PB11MP_GIC_CPU_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PB11MP_GIC_CPU_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_PB11MP_GIC_DIST_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PB11MP_GIC_DIST_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {	/* Maps the SCU, GIC CPU interface, TWD, GIC DIST */
-		.virtual	= IO_ADDRESS(REALVIEW_TC11MP_PRIV_MEM_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_TC11MP_PRIV_MEM_BASE),
-		.length		= REALVIEW_TC11MP_PRIV_MEM_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_SCTL_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_SCTL_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_PB11MP_TIMER0_1_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PB11MP_TIMER0_1_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_PB11MP_TIMER2_3_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PB11MP_TIMER2_3_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_TC11MP_L220_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_TC11MP_L220_BASE),
-		.length		= SZ_8K,
-		.type		= MT_DEVICE,
-	},
-#ifdef CONFIG_DEBUG_LL
-	{
-		.virtual	= IO_ADDRESS(REALVIEW_PB11MP_UART0_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PB11MP_UART0_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	},
-#endif
-};
-
-static void __init realview_pb11mp_map_io(void)
-{
-	iotable_init(realview_pb11mp_io_desc, ARRAY_SIZE(realview_pb11mp_io_desc));
-}
-
-static struct pl061_platform_data gpio0_plat_data = {
-	.gpio_base	= 0,
-};
-
-static struct pl061_platform_data gpio1_plat_data = {
-	.gpio_base	= 8,
-};
-
-static struct pl061_platform_data gpio2_plat_data = {
-	.gpio_base	= 16,
-};
-
-static struct pl022_ssp_controller ssp0_plat_data = {
-	.bus_id = 0,
-	.enable_dma = 0,
-	.num_chipselect = 1,
-};
-
-/*
- * RealView PB11MPCore AMBA devices
- */
-
-#define GPIO2_IRQ		{ IRQ_PB11MP_GPIO2 }
-#define GPIO3_IRQ		{ IRQ_PB11MP_GPIO3 }
-#define AACI_IRQ		{ IRQ_TC11MP_AACI }
-#define MMCI0_IRQ		{ IRQ_TC11MP_MMCI0A, IRQ_TC11MP_MMCI0B }
-#define KMI0_IRQ		{ IRQ_TC11MP_KMI0 }
-#define KMI1_IRQ		{ IRQ_TC11MP_KMI1 }
-#define PB11MP_SMC_IRQ		{ }
-#define MPMC_IRQ		{ }
-#define PB11MP_CLCD_IRQ		{ IRQ_PB11MP_CLCD }
-#define DMAC_IRQ		{ IRQ_PB11MP_DMAC }
-#define SCTL_IRQ		{ }
-#define PB11MP_WATCHDOG_IRQ	{ IRQ_PB11MP_WATCHDOG }
-#define PB11MP_GPIO0_IRQ	{ IRQ_PB11MP_GPIO0 }
-#define GPIO1_IRQ		{ IRQ_PB11MP_GPIO1 }
-#define PB11MP_RTC_IRQ		{ IRQ_TC11MP_RTC }
-#define SCI_IRQ			{ IRQ_PB11MP_SCI }
-#define PB11MP_UART0_IRQ	{ IRQ_TC11MP_UART0 }
-#define PB11MP_UART1_IRQ	{ IRQ_TC11MP_UART1 }
-#define PB11MP_UART2_IRQ	{ IRQ_PB11MP_UART2 }
-#define PB11MP_UART3_IRQ	{ IRQ_PB11MP_UART3 }
-#define PB11MP_SSP_IRQ		{ IRQ_PB11MP_SSP }
-
-/* FPGA Primecells */
-APB_DEVICE(aaci,	"fpga:aaci",	AACI,		NULL);
-APB_DEVICE(mmc0,	"fpga:mmc0",	MMCI0,		&realview_mmc0_plat_data);
-APB_DEVICE(kmi0,	"fpga:kmi0",	KMI0,		NULL);
-APB_DEVICE(kmi1,	"fpga:kmi1",	KMI1,		NULL);
-APB_DEVICE(uart3,	"fpga:uart3",	PB11MP_UART3,	NULL);
-
-/* DevChip Primecells */
-AHB_DEVICE(smc,		"dev:smc",	PB11MP_SMC,	NULL);
-AHB_DEVICE(sctl,	"dev:sctl",	SCTL,		NULL);
-APB_DEVICE(wdog,	"dev:wdog",	PB11MP_WATCHDOG, NULL);
-APB_DEVICE(gpio0,	"dev:gpio0",	PB11MP_GPIO0,	&gpio0_plat_data);
-APB_DEVICE(gpio1,	"dev:gpio1",	GPIO1,		&gpio1_plat_data);
-APB_DEVICE(gpio2,	"dev:gpio2",	GPIO2,		&gpio2_plat_data);
-APB_DEVICE(rtc,		"dev:rtc",	PB11MP_RTC,	NULL);
-APB_DEVICE(sci0,	"dev:sci0",	SCI,		NULL);
-APB_DEVICE(uart0,	"dev:uart0",	PB11MP_UART0,	NULL);
-APB_DEVICE(uart1,	"dev:uart1",	PB11MP_UART1,	NULL);
-APB_DEVICE(uart2,	"dev:uart2",	PB11MP_UART2,	NULL);
-APB_DEVICE(ssp0,	"dev:ssp0",	PB11MP_SSP,	&ssp0_plat_data);
-
-/* Primecells on the NEC ISSP chip */
-AHB_DEVICE(clcd,	"issp:clcd",	PB11MP_CLCD,	&clcd_plat_data);
-AHB_DEVICE(dmac,	"issp:dmac",	DMAC,		NULL);
-
-static struct amba_device *amba_devs[] __initdata = {
-	&dmac_device,
-	&uart0_device,
-	&uart1_device,
-	&uart2_device,
-	&uart3_device,
-	&smc_device,
-	&clcd_device,
-	&sctl_device,
-	&wdog_device,
-	&gpio0_device,
-	&gpio1_device,
-	&gpio2_device,
-	&rtc_device,
-	&sci0_device,
-	&ssp0_device,
-	&aaci_device,
-	&mmc0_device,
-	&kmi0_device,
-	&kmi1_device,
-};
-
-/*
- * RealView PB11MPCore platform devices
- */
-static struct resource realview_pb11mp_flash_resource[] = {
-	[0] = {
-		.start		= REALVIEW_PB11MP_FLASH0_BASE,
-		.end		= REALVIEW_PB11MP_FLASH0_BASE + REALVIEW_PB11MP_FLASH0_SIZE - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= REALVIEW_PB11MP_FLASH1_BASE,
-		.end		= REALVIEW_PB11MP_FLASH1_BASE + REALVIEW_PB11MP_FLASH1_SIZE - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct resource realview_pb11mp_smsc911x_resources[] = {
-	[0] = {
-		.start		= REALVIEW_PB11MP_ETH_BASE,
-		.end		= REALVIEW_PB11MP_ETH_BASE + SZ_64K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= IRQ_TC11MP_ETH,
-		.end		= IRQ_TC11MP_ETH,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource realview_pb11mp_isp1761_resources[] = {
-	[0] = {
-		.start		= REALVIEW_PB11MP_USB_BASE,
-		.end		= REALVIEW_PB11MP_USB_BASE + SZ_128K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= IRQ_TC11MP_USB,
-		.end		= IRQ_TC11MP_USB,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource pmu_resources[] = {
-	[0] = {
-		.start		= IRQ_TC11MP_PMU_CPU0,
-		.end		= IRQ_TC11MP_PMU_CPU0,
-		.flags		= IORESOURCE_IRQ,
-	},
-	[1] = {
-		.start		= IRQ_TC11MP_PMU_CPU1,
-		.end		= IRQ_TC11MP_PMU_CPU1,
-		.flags		= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start		= IRQ_TC11MP_PMU_CPU2,
-		.end		= IRQ_TC11MP_PMU_CPU2,
-		.flags		= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start		= IRQ_TC11MP_PMU_CPU3,
-		.end		= IRQ_TC11MP_PMU_CPU3,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device pmu_device = {
-	.name			= "armv6-pmu",
-	.id			= -1,
-	.num_resources		= ARRAY_SIZE(pmu_resources),
-	.resource		= pmu_resources,
-};
-
-static void __init gic_init_irq(void)
-{
-	unsigned int pldctrl;
-
-	/* new irq mode with no DCC */
-	writel(0x0000a05f, __io_address(REALVIEW_SYS_LOCK));
-	pldctrl = readl(__io_address(REALVIEW_SYS_BASE)	+ REALVIEW_PB11MP_SYS_PLD_CTRL1);
-	pldctrl |= 2 << 22;
-	writel(pldctrl, __io_address(REALVIEW_SYS_BASE) + REALVIEW_PB11MP_SYS_PLD_CTRL1);
-	writel(0x00000000, __io_address(REALVIEW_SYS_LOCK));
-
-	/* ARM11MPCore test chip GIC, primary */
-	gic_init(0, 29, __io_address(REALVIEW_TC11MP_GIC_DIST_BASE),
-		 __io_address(REALVIEW_TC11MP_GIC_CPU_BASE));
-
-	/* board GIC, secondary */
-	gic_init(1, IRQ_PB11MP_GIC_START,
-		 __io_address(REALVIEW_PB11MP_GIC_DIST_BASE),
-		 __io_address(REALVIEW_PB11MP_GIC_CPU_BASE));
-	gic_cascade_irq(1, IRQ_TC11MP_PB_IRQ1);
-}
-
-#ifdef CONFIG_HAVE_ARM_TWD
-static DEFINE_TWD_LOCAL_TIMER(twd_local_timer,
-			      REALVIEW_TC11MP_TWD_BASE,
-			      IRQ_LOCALTIMER);
-
-static void __init realview_pb11mp_twd_init(void)
-{
-	int err = twd_local_timer_register(&twd_local_timer);
-	if (err)
-		pr_err("twd_local_timer_register failed %d\n", err);
-}
-#else
-#define realview_pb11mp_twd_init()	do {} while(0)
-#endif
-
-static void __init realview_pb11mp_timer_init(void)
-{
-	timer0_va_base = __io_address(REALVIEW_PB11MP_TIMER0_1_BASE);
-	timer1_va_base = __io_address(REALVIEW_PB11MP_TIMER0_1_BASE) + 0x20;
-	timer2_va_base = __io_address(REALVIEW_PB11MP_TIMER2_3_BASE);
-	timer3_va_base = __io_address(REALVIEW_PB11MP_TIMER2_3_BASE) + 0x20;
-
-	realview_clk_init(__io_address(REALVIEW_SYS_BASE), false);
-	realview_timer_init(IRQ_TC11MP_TIMER0_1);
-	realview_pb11mp_twd_init();
-}
-
-static void realview_pb11mp_restart(enum reboot_mode mode, const char *cmd)
-{
-	void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
-	void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK);
-
-	/*
-	 * To reset, we hit the on-board reset register
-	 * in the system FPGA
-	 */
-	__raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
-	__raw_writel(0x0000, reset_ctrl);
-	__raw_writel(0x0004, reset_ctrl);
-	dsb();
-}
-
-static void __init realview_pb11mp_init(void)
-{
-	int i;
-
-#ifdef CONFIG_CACHE_L2X0
-	/*
-	 * The PL220 needs to be manually configured as the hardware
-	 * doesn't report the correct sizes.
-	 * 1MB (128KB/way), 8-way associativity, event monitor and
-	 * parity enabled, ignore share bit, no force write allocate
-	 * Bits:  .... ...0 0111 1001 0000 .... .... ....
-	 */
-	l2x0_init(__io_address(REALVIEW_TC11MP_L220_BASE), 0x00790000, 0xfe000fff);
-	/*
-	 * due to a bug in the l220 cache controller, we must not call
-	 * the sync function. stub it out here instead!
-	 */
-	outer_cache.sync = NULL;
-#endif
-
-	realview_flash_register(realview_pb11mp_flash_resource,
-				ARRAY_SIZE(realview_pb11mp_flash_resource));
-	realview_eth_register(NULL, realview_pb11mp_smsc911x_resources);
-	platform_device_register(&realview_i2c_device);
-	platform_device_register(&realview_cf_device);
-	platform_device_register(&realview_leds_device);
-	realview_usb_register(realview_pb11mp_isp1761_resources);
-	platform_device_register(&pmu_device);
-
-	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
-		struct amba_device *d = amba_devs[i];
-		amba_device_register(d, &iomem_resource);
-	}
-}
-
-MACHINE_START(REALVIEW_PB11MP, "ARM-RealView PB11MPCore")
-	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.atag_offset	= 0x100,
-	.smp		= smp_ops(realview_smp_ops),
-	.fixup		= realview_fixup,
-	.map_io		= realview_pb11mp_map_io,
-	.init_early	= realview_init_early,
-	.init_irq	= gic_init_irq,
-	.init_time	= realview_pb11mp_timer_init,
-	.init_machine	= realview_pb11mp_init,
-#ifdef CONFIG_ZONE_DMA
-	.dma_zone_size	= SZ_256M,
-#endif
-	.restart	= realview_pb11mp_restart,
-MACHINE_END
diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c
deleted file mode 100644
index ddafb67..0000000
--- a/arch/arm/mach-realview/realview_pba8.c
+++ /dev/null
@@ -1,307 +0,0 @@
-/*
- *  linux/arch/arm/mach-realview/realview_pba8.c
- *
- *  Copyright (C) 2008 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/device.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/pl061.h>
-#include <linux/amba/mmci.h>
-#include <linux/amba/pl022.h>
-#include <linux/io.h>
-#include <linux/irqchip/arm-gic.h>
-#include <linux/platform_data/clk-realview.h>
-#include <linux/reboot.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-#include <asm/pgtable.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-
-#include "hardware.h"
-#include "board-pba8.h"
-#include "irqs-pba8.h"
-
-#include "core.h"
-
-static struct map_desc realview_pba8_io_desc[] __initdata = {
-	{
-		.virtual	= IO_ADDRESS(REALVIEW_SYS_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_SYS_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_PBA8_GIC_CPU_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PBA8_GIC_CPU_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_PBA8_GIC_DIST_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PBA8_GIC_DIST_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_SCTL_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_SCTL_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_PBA8_TIMER0_1_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PBA8_TIMER0_1_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_PBA8_TIMER2_3_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PBA8_TIMER2_3_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	},
-#ifdef CONFIG_DEBUG_LL
-	{
-		.virtual	= IO_ADDRESS(REALVIEW_PBA8_UART0_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PBA8_UART0_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	},
-#endif
-};
-
-static void __init realview_pba8_map_io(void)
-{
-	iotable_init(realview_pba8_io_desc, ARRAY_SIZE(realview_pba8_io_desc));
-}
-
-static struct pl061_platform_data gpio0_plat_data = {
-	.gpio_base	= 0,
-};
-
-static struct pl061_platform_data gpio1_plat_data = {
-	.gpio_base	= 8,
-};
-
-static struct pl061_platform_data gpio2_plat_data = {
-	.gpio_base	= 16,
-};
-
-static struct pl022_ssp_controller ssp0_plat_data = {
-	.bus_id = 0,
-	.enable_dma = 0,
-	.num_chipselect = 1,
-};
-
-/*
- * RealView PBA8Core AMBA devices
- */
-
-#define GPIO2_IRQ		{ IRQ_PBA8_GPIO2 }
-#define GPIO3_IRQ		{ IRQ_PBA8_GPIO3 }
-#define AACI_IRQ		{ IRQ_PBA8_AACI }
-#define MMCI0_IRQ		{ IRQ_PBA8_MMCI0A, IRQ_PBA8_MMCI0B }
-#define KMI0_IRQ		{ IRQ_PBA8_KMI0 }
-#define KMI1_IRQ		{ IRQ_PBA8_KMI1 }
-#define PBA8_SMC_IRQ		{ }
-#define MPMC_IRQ		{ }
-#define PBA8_CLCD_IRQ		{ IRQ_PBA8_CLCD }
-#define DMAC_IRQ		{ IRQ_PBA8_DMAC }
-#define SCTL_IRQ		{ }
-#define PBA8_WATCHDOG_IRQ	{ IRQ_PBA8_WATCHDOG }
-#define PBA8_GPIO0_IRQ		{ IRQ_PBA8_GPIO0 }
-#define GPIO1_IRQ		{ IRQ_PBA8_GPIO1 }
-#define PBA8_RTC_IRQ		{ IRQ_PBA8_RTC }
-#define SCI_IRQ			{ IRQ_PBA8_SCI }
-#define PBA8_UART0_IRQ		{ IRQ_PBA8_UART0 }
-#define PBA8_UART1_IRQ		{ IRQ_PBA8_UART1 }
-#define PBA8_UART2_IRQ		{ IRQ_PBA8_UART2 }
-#define PBA8_UART3_IRQ		{ IRQ_PBA8_UART3 }
-#define PBA8_SSP_IRQ		{ IRQ_PBA8_SSP }
-
-/* FPGA Primecells */
-APB_DEVICE(aaci,	"fpga:aaci",	AACI,		NULL);
-APB_DEVICE(mmc0,	"fpga:mmc0",	MMCI0,		&realview_mmc0_plat_data);
-APB_DEVICE(kmi0,	"fpga:kmi0",	KMI0,		NULL);
-APB_DEVICE(kmi1,	"fpga:kmi1",	KMI1,		NULL);
-APB_DEVICE(uart3,	"fpga:uart3",	PBA8_UART3,	NULL);
-
-/* DevChip Primecells */
-AHB_DEVICE(smc,		"dev:smc",	PBA8_SMC,	NULL);
-AHB_DEVICE(sctl,	"dev:sctl",	SCTL,		NULL);
-APB_DEVICE(wdog,	"dev:wdog",	PBA8_WATCHDOG, NULL);
-APB_DEVICE(gpio0,	"dev:gpio0",	PBA8_GPIO0,	&gpio0_plat_data);
-APB_DEVICE(gpio1,	"dev:gpio1",	GPIO1,		&gpio1_plat_data);
-APB_DEVICE(gpio2,	"dev:gpio2",	GPIO2,		&gpio2_plat_data);
-APB_DEVICE(rtc,		"dev:rtc",	PBA8_RTC,	NULL);
-APB_DEVICE(sci0,	"dev:sci0",	SCI,		NULL);
-APB_DEVICE(uart0,	"dev:uart0",	PBA8_UART0,	NULL);
-APB_DEVICE(uart1,	"dev:uart1",	PBA8_UART1,	NULL);
-APB_DEVICE(uart2,	"dev:uart2",	PBA8_UART2,	NULL);
-APB_DEVICE(ssp0,	"dev:ssp0",	PBA8_SSP,	&ssp0_plat_data);
-
-/* Primecells on the NEC ISSP chip */
-AHB_DEVICE(clcd,	"issp:clcd",	PBA8_CLCD,	&clcd_plat_data);
-AHB_DEVICE(dmac,	"issp:dmac",	DMAC,		NULL);
-
-static struct amba_device *amba_devs[] __initdata = {
-	&dmac_device,
-	&uart0_device,
-	&uart1_device,
-	&uart2_device,
-	&uart3_device,
-	&smc_device,
-	&clcd_device,
-	&sctl_device,
-	&wdog_device,
-	&gpio0_device,
-	&gpio1_device,
-	&gpio2_device,
-	&rtc_device,
-	&sci0_device,
-	&ssp0_device,
-	&aaci_device,
-	&mmc0_device,
-	&kmi0_device,
-	&kmi1_device,
-};
-
-/*
- * RealView PB-A8 platform devices
- */
-static struct resource realview_pba8_flash_resource[] = {
-	[0] = {
-		.start		= REALVIEW_PBA8_FLASH0_BASE,
-		.end		= REALVIEW_PBA8_FLASH0_BASE + REALVIEW_PBA8_FLASH0_SIZE - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= REALVIEW_PBA8_FLASH1_BASE,
-		.end		= REALVIEW_PBA8_FLASH1_BASE + REALVIEW_PBA8_FLASH1_SIZE - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct resource realview_pba8_smsc911x_resources[] = {
-	[0] = {
-		.start		= REALVIEW_PBA8_ETH_BASE,
-		.end		= REALVIEW_PBA8_ETH_BASE + SZ_64K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= IRQ_PBA8_ETH,
-		.end		= IRQ_PBA8_ETH,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource realview_pba8_isp1761_resources[] = {
-	[0] = {
-		.start		= REALVIEW_PBA8_USB_BASE,
-		.end		= REALVIEW_PBA8_USB_BASE + SZ_128K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= IRQ_PBA8_USB,
-		.end		= IRQ_PBA8_USB,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource pmu_resource = {
-	.start		= IRQ_PBA8_PMU,
-	.end		= IRQ_PBA8_PMU,
-	.flags		= IORESOURCE_IRQ,
-};
-
-static struct platform_device pmu_device = {
-	.name			= "armv7-pmu",
-	.id			= -1,
-	.num_resources		= 1,
-	.resource		= &pmu_resource,
-};
-
-static void __init gic_init_irq(void)
-{
-	/* ARM PB-A8 on-board GIC */
-	gic_init(0, IRQ_PBA8_GIC_START,
-		 __io_address(REALVIEW_PBA8_GIC_DIST_BASE),
-		 __io_address(REALVIEW_PBA8_GIC_CPU_BASE));
-}
-
-static void __init realview_pba8_timer_init(void)
-{
-	timer0_va_base = __io_address(REALVIEW_PBA8_TIMER0_1_BASE);
-	timer1_va_base = __io_address(REALVIEW_PBA8_TIMER0_1_BASE) + 0x20;
-	timer2_va_base = __io_address(REALVIEW_PBA8_TIMER2_3_BASE);
-	timer3_va_base = __io_address(REALVIEW_PBA8_TIMER2_3_BASE) + 0x20;
-
-	realview_clk_init(__io_address(REALVIEW_SYS_BASE), false);
-	realview_timer_init(IRQ_PBA8_TIMER0_1);
-}
-
-static void realview_pba8_restart(enum reboot_mode mode, const char *cmd)
-{
-	void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
-	void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK);
-
-	/*
-	 * To reset, we hit the on-board reset register
-	 * in the system FPGA
-	 */
-	__raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
-	__raw_writel(0x0000, reset_ctrl);
-	__raw_writel(0x0004, reset_ctrl);
-	dsb();
-}
-
-static void __init realview_pba8_init(void)
-{
-	int i;
-
-	realview_flash_register(realview_pba8_flash_resource,
-				ARRAY_SIZE(realview_pba8_flash_resource));
-	realview_eth_register(NULL, realview_pba8_smsc911x_resources);
-	platform_device_register(&realview_i2c_device);
-	platform_device_register(&realview_cf_device);
-	platform_device_register(&realview_leds_device);
-	realview_usb_register(realview_pba8_isp1761_resources);
-	platform_device_register(&pmu_device);
-
-	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
-		struct amba_device *d = amba_devs[i];
-		amba_device_register(d, &iomem_resource);
-	}
-}
-
-MACHINE_START(REALVIEW_PBA8, "ARM-RealView PB-A8")
-	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.atag_offset	= 0x100,
-	.fixup		= realview_fixup,
-	.map_io		= realview_pba8_map_io,
-	.init_early	= realview_init_early,
-	.init_irq	= gic_init_irq,
-	.init_time	= realview_pba8_timer_init,
-	.init_machine	= realview_pba8_init,
-#ifdef CONFIG_ZONE_DMA
-	.dma_zone_size	= SZ_256M,
-#endif
-	.restart	= realview_pba8_restart,
-MACHINE_END
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
deleted file mode 100644
index be1cec5..0000000
--- a/arch/arm/mach-realview/realview_pbx.c
+++ /dev/null
@@ -1,402 +0,0 @@
-/*
- *  arch/arm/mach-realview/realview_pbx.c
- *
- *  Copyright (C) 2009 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/device.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/pl061.h>
-#include <linux/amba/mmci.h>
-#include <linux/amba/pl022.h>
-#include <linux/io.h>
-#include <linux/irqchip/arm-gic.h>
-#include <linux/platform_data/clk-realview.h>
-#include <linux/reboot.h>
-#include <linux/memblock.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-#include <asm/smp_twd.h>
-#include <asm/pgtable.h>
-#include <asm/hardware/cache-l2x0.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-
-#include "hardware.h"
-#include "board-pbx.h"
-#include "irqs-pbx.h"
-
-#include "core.h"
-
-static struct map_desc realview_pbx_io_desc[] __initdata = {
-	{
-		.virtual	= IO_ADDRESS(REALVIEW_SYS_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_SYS_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_PBX_GIC_CPU_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PBX_GIC_CPU_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_PBX_GIC_DIST_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PBX_GIC_DIST_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_SCTL_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_SCTL_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_PBX_TIMER0_1_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PBX_TIMER0_1_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_PBX_TIMER2_3_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PBX_TIMER2_3_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	},
-#ifdef CONFIG_DEBUG_LL
-	{
-		.virtual	= IO_ADDRESS(REALVIEW_PBX_UART0_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PBX_UART0_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	},
-#endif
-};
-
-static struct map_desc realview_local_io_desc[] __initdata = {
-	{
-		.virtual        = IO_ADDRESS(REALVIEW_PBX_TILE_SCU_BASE),
-		.pfn            = __phys_to_pfn(REALVIEW_PBX_TILE_SCU_BASE),
-		.length         = SZ_4K,
-		.type           = MT_DEVICE,
-	}, {
-		.virtual        = IO_ADDRESS(REALVIEW_PBX_TILE_GIC_DIST_BASE),
-		.pfn            = __phys_to_pfn(REALVIEW_PBX_TILE_GIC_DIST_BASE),
-		.length         = SZ_4K,
-		.type           = MT_DEVICE,
-	}, {
-		.virtual        = IO_ADDRESS(REALVIEW_PBX_TILE_L220_BASE),
-		.pfn            = __phys_to_pfn(REALVIEW_PBX_TILE_L220_BASE),
-		.length         = SZ_8K,
-		.type           = MT_DEVICE,
-	}
-};
-
-static void __init realview_pbx_map_io(void)
-{
-	iotable_init(realview_pbx_io_desc, ARRAY_SIZE(realview_pbx_io_desc));
-	if (core_tile_pbx11mp() || core_tile_pbxa9mp())
-		iotable_init(realview_local_io_desc, ARRAY_SIZE(realview_local_io_desc));
-}
-
-static struct pl061_platform_data gpio0_plat_data = {
-	.gpio_base	= 0,
-};
-
-static struct pl061_platform_data gpio1_plat_data = {
-	.gpio_base	= 8,
-};
-
-static struct pl061_platform_data gpio2_plat_data = {
-	.gpio_base	= 16,
-};
-
-static struct pl022_ssp_controller ssp0_plat_data = {
-	.bus_id = 0,
-	.enable_dma = 0,
-	.num_chipselect = 1,
-};
-
-/*
- * RealView PBXCore AMBA devices
- */
-
-#define GPIO2_IRQ		{ IRQ_PBX_GPIO2 }
-#define GPIO3_IRQ		{ IRQ_PBX_GPIO3 }
-#define AACI_IRQ		{ IRQ_PBX_AACI }
-#define MMCI0_IRQ		{ IRQ_PBX_MMCI0A, IRQ_PBX_MMCI0B }
-#define KMI0_IRQ		{ IRQ_PBX_KMI0 }
-#define KMI1_IRQ		{ IRQ_PBX_KMI1 }
-#define PBX_SMC_IRQ		{ }
-#define MPMC_IRQ		{ }
-#define PBX_CLCD_IRQ		{ IRQ_PBX_CLCD }
-#define DMAC_IRQ		{ IRQ_PBX_DMAC }
-#define SCTL_IRQ		{ }
-#define PBX_WATCHDOG_IRQ	{ IRQ_PBX_WATCHDOG }
-#define PBX_GPIO0_IRQ		{ IRQ_PBX_GPIO0 }
-#define GPIO1_IRQ		{ IRQ_PBX_GPIO1 }
-#define PBX_RTC_IRQ		{ IRQ_PBX_RTC }
-#define SCI_IRQ			{ IRQ_PBX_SCI }
-#define PBX_UART0_IRQ		{ IRQ_PBX_UART0 }
-#define PBX_UART1_IRQ		{ IRQ_PBX_UART1 }
-#define PBX_UART2_IRQ		{ IRQ_PBX_UART2 }
-#define PBX_UART3_IRQ		{ IRQ_PBX_UART3 }
-#define PBX_SSP_IRQ		{ IRQ_PBX_SSP }
-
-/* FPGA Primecells */
-APB_DEVICE(aaci,	"fpga:aaci",	AACI,		NULL);
-APB_DEVICE(mmc0,	"fpga:mmc0",	MMCI0,		&realview_mmc0_plat_data);
-APB_DEVICE(kmi0,	"fpga:kmi0",	KMI0,		NULL);
-APB_DEVICE(kmi1,	"fpga:kmi1",	KMI1,		NULL);
-APB_DEVICE(uart3,	"fpga:uart3",	PBX_UART3,	NULL);
-
-/* DevChip Primecells */
-AHB_DEVICE(smc,	"dev:smc",	PBX_SMC,	NULL);
-AHB_DEVICE(sctl,	"dev:sctl",	SCTL,		NULL);
-APB_DEVICE(wdog,	"dev:wdog",	PBX_WATCHDOG, 	NULL);
-APB_DEVICE(gpio0,	"dev:gpio0",	PBX_GPIO0,	&gpio0_plat_data);
-APB_DEVICE(gpio1,	"dev:gpio1",	GPIO1,		&gpio1_plat_data);
-APB_DEVICE(gpio2,	"dev:gpio2",	GPIO2,		&gpio2_plat_data);
-APB_DEVICE(rtc,		"dev:rtc",	PBX_RTC,	NULL);
-APB_DEVICE(sci0,	"dev:sci0",	SCI,		NULL);
-APB_DEVICE(uart0,	"dev:uart0",	PBX_UART0,	NULL);
-APB_DEVICE(uart1,	"dev:uart1",	PBX_UART1,	NULL);
-APB_DEVICE(uart2,	"dev:uart2",	PBX_UART2,	NULL);
-APB_DEVICE(ssp0,	"dev:ssp0",	PBX_SSP,	&ssp0_plat_data);
-
-/* Primecells on the NEC ISSP chip */
-AHB_DEVICE(clcd,	"issp:clcd",	PBX_CLCD,	&clcd_plat_data);
-AHB_DEVICE(dmac,	"issp:dmac",	DMAC,		NULL);
-
-static struct amba_device *amba_devs[] __initdata = {
-	&dmac_device,
-	&uart0_device,
-	&uart1_device,
-	&uart2_device,
-	&uart3_device,
-	&smc_device,
-	&clcd_device,
-	&sctl_device,
-	&wdog_device,
-	&gpio0_device,
-	&gpio1_device,
-	&gpio2_device,
-	&rtc_device,
-	&sci0_device,
-	&ssp0_device,
-	&aaci_device,
-	&mmc0_device,
-	&kmi0_device,
-	&kmi1_device,
-};
-
-/*
- * RealView PB-X platform devices
- */
-static struct resource realview_pbx_flash_resources[] = {
-	[0] = {
-		.start          = REALVIEW_PBX_FLASH0_BASE,
-		.end            = REALVIEW_PBX_FLASH0_BASE + REALVIEW_PBX_FLASH0_SIZE - 1,
-		.flags          = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start          = REALVIEW_PBX_FLASH1_BASE,
-		.end            = REALVIEW_PBX_FLASH1_BASE + REALVIEW_PBX_FLASH1_SIZE - 1,
-		.flags          = IORESOURCE_MEM,
-	},
-};
-
-static struct resource realview_pbx_smsc911x_resources[] = {
-	[0] = {
-		.start		= REALVIEW_PBX_ETH_BASE,
-		.end		= REALVIEW_PBX_ETH_BASE + SZ_64K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= IRQ_PBX_ETH,
-		.end		= IRQ_PBX_ETH,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource realview_pbx_isp1761_resources[] = {
-	[0] = {
-		.start		= REALVIEW_PBX_USB_BASE,
-		.end		= REALVIEW_PBX_USB_BASE + SZ_128K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= IRQ_PBX_USB,
-		.end		= IRQ_PBX_USB,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-#ifdef CONFIG_CACHE_L2X0
-static struct resource pmu_resources[] = {
-	[0] = {
-		.start		= IRQ_PBX_PMU_CPU0,
-		.end		= IRQ_PBX_PMU_CPU0,
-		.flags		= IORESOURCE_IRQ,
-	},
-	[1] = {
-		.start		= IRQ_PBX_PMU_CPU1,
-		.end		= IRQ_PBX_PMU_CPU1,
-		.flags		= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start		= IRQ_PBX_PMU_CPU2,
-		.end		= IRQ_PBX_PMU_CPU2,
-		.flags		= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start		= IRQ_PBX_PMU_CPU3,
-		.end		= IRQ_PBX_PMU_CPU3,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device pmu_device = {
-	.name			= "armv7-pmu",
-	.id			= -1,
-	.num_resources		= ARRAY_SIZE(pmu_resources),
-	.resource		= pmu_resources,
-};
-#endif
-
-static void __init gic_init_irq(void)
-{
-	/* ARM PBX on-board GIC */
-	if (core_tile_pbx11mp() || core_tile_pbxa9mp()) {
-		gic_init(0, 29, __io_address(REALVIEW_PBX_TILE_GIC_DIST_BASE),
-			 __io_address(REALVIEW_PBX_TILE_GIC_CPU_BASE));
-	} else {
-		gic_init(0, IRQ_PBX_GIC_START,
-			 __io_address(REALVIEW_PBX_GIC_DIST_BASE),
-			 __io_address(REALVIEW_PBX_GIC_CPU_BASE));
-	}
-}
-
-#ifdef CONFIG_HAVE_ARM_TWD
-static DEFINE_TWD_LOCAL_TIMER(twd_local_timer,
-			      REALVIEW_PBX_TILE_TWD_BASE,
-			      IRQ_LOCALTIMER);
-
-static void __init realview_pbx_twd_init(void)
-{
-	int err = twd_local_timer_register(&twd_local_timer);
-	if (err)
-		pr_err("twd_local_timer_register failed %d\n", err);
-}
-#else
-#define realview_pbx_twd_init()	do { } while(0)
-#endif
-
-static void __init realview_pbx_timer_init(void)
-{
-	timer0_va_base = __io_address(REALVIEW_PBX_TIMER0_1_BASE);
-	timer1_va_base = __io_address(REALVIEW_PBX_TIMER0_1_BASE) + 0x20;
-	timer2_va_base = __io_address(REALVIEW_PBX_TIMER2_3_BASE);
-	timer3_va_base = __io_address(REALVIEW_PBX_TIMER2_3_BASE) + 0x20;
-
-	realview_clk_init(__io_address(REALVIEW_SYS_BASE), false);
-	realview_timer_init(IRQ_PBX_TIMER0_1);
-	realview_pbx_twd_init();
-}
-
-static void realview_pbx_fixup(struct tag *tags, char **from)
-{
-#ifdef CONFIG_SPARSEMEM
-	/*
-	 * Memory configuration with SPARSEMEM enabled on RealView PBX (see
-	 * asm/mach/memory.h for more information).
-	 */
-
-	memblock_add(0, SZ_256M);
-	memblock_add(0x20000000, SZ_512M);
-	memblock_add(0x80000000, SZ_256M);
-#else
-	realview_fixup(tags, from);
-#endif
-}
-
-static void realview_pbx_restart(enum reboot_mode mode, const char *cmd)
-{
-	void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
-	void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK);
-
-	/*
-	 * To reset, we hit the on-board reset register
-	 * in the system FPGA
-	 */
-	__raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
-	__raw_writel(0x00F0, reset_ctrl);
-	__raw_writel(0x00F4, reset_ctrl);
-	dsb();
-}
-
-static void __init realview_pbx_init(void)
-{
-	int i;
-
-#ifdef CONFIG_CACHE_L2X0
-	if (core_tile_pbxa9mp()) {
-		void __iomem *l2x0_base =
-			__io_address(REALVIEW_PBX_TILE_L220_BASE);
-
-		/* set RAM latencies to 1 cycle for eASIC */
-		writel(0, l2x0_base + L310_TAG_LATENCY_CTRL);
-		writel(0, l2x0_base + L310_DATA_LATENCY_CTRL);
-
-		/* 16KB way size, 8-way associativity, parity disabled
-		 * Bits:  .. 0 0 0 0 1 00 1 0 1 001 0 000 0 .... .... .... */
-		l2x0_init(l2x0_base, 0x02520000, 0xc0000fff);
-		platform_device_register(&pmu_device);
-	}
-#endif
-
-	realview_flash_register(realview_pbx_flash_resources,
-				ARRAY_SIZE(realview_pbx_flash_resources));
-	realview_eth_register(NULL, realview_pbx_smsc911x_resources);
-	platform_device_register(&realview_i2c_device);
-	platform_device_register(&realview_cf_device);
-	platform_device_register(&realview_leds_device);
-	realview_usb_register(realview_pbx_isp1761_resources);
-
-	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
-		struct amba_device *d = amba_devs[i];
-		amba_device_register(d, &iomem_resource);
-	}
-}
-
-MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX")
-	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.atag_offset	= 0x100,
-	.smp		= smp_ops(realview_smp_ops),
-	.fixup		= realview_pbx_fixup,
-	.map_io		= realview_pbx_map_io,
-	.init_early	= realview_init_early,
-	.init_irq	= gic_init_irq,
-	.init_time	= realview_pbx_timer_init,
-	.init_machine	= realview_pbx_init,
-#ifdef CONFIG_ZONE_DMA
-	.dma_zone_size	= SZ_256M,
-#endif
-	.restart	= realview_pbx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/common.c b/arch/arm/mach-s3c24xx/common.c
index ba0ceeb..f6c3f15 100644
--- a/arch/arm/mach-s3c24xx/common.c
+++ b/arch/arm/mach-s3c24xx/common.c
@@ -21,7 +21,7 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */
 
-
+#include <linux/dma-mapping.h>
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
@@ -305,6 +305,8 @@
 	},
 };
 
+#define s3c24xx_device_dma_mask (*((u64[]) { DMA_BIT_MASK(32) }))
+
 #if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \
 	defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
 static struct resource s3c2410_dma_resource[] = {
@@ -355,7 +357,9 @@
 	.num_resources	= ARRAY_SIZE(s3c2410_dma_resource),
 	.resource	= s3c2410_dma_resource,
 	.dev	= {
-		.platform_data	= &s3c2410_dma_platdata,
+		.dma_mask = &s3c24xx_device_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+		.platform_data = &s3c2410_dma_platdata,
 	},
 };
 #endif
@@ -396,7 +400,9 @@
 	.num_resources	= ARRAY_SIZE(s3c2410_dma_resource),
 	.resource	= s3c2410_dma_resource,
 	.dev	= {
-		.platform_data	= &s3c2412_dma_platdata,
+		.dma_mask = &s3c24xx_device_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+		.platform_data = &s3c2412_dma_platdata,
 	},
 };
 #endif
@@ -486,7 +492,9 @@
 	.num_resources	= ARRAY_SIZE(s3c2410_dma_resource),
 	.resource	= s3c2410_dma_resource,
 	.dev	= {
-		.platform_data	= &s3c2440_dma_platdata,
+		.dma_mask = &s3c24xx_device_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+		.platform_data = &s3c2440_dma_platdata,
 	},
 };
 #endif
@@ -538,7 +546,9 @@
 	.num_resources	= ARRAY_SIZE(s3c2443_dma_resource),
 	.resource	= s3c2443_dma_resource,
 	.dev	= {
-		.platform_data	= &s3c2443_dma_platdata,
+		.dma_mask = &s3c24xx_device_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+		.platform_data = &s3c2443_dma_platdata,
 	},
 };
 #endif
diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c
index 13999c1..ec60bd4 100644
--- a/arch/arm/mach-s3c24xx/mach-mini2440.c
+++ b/arch/arm/mach-s3c24xx/mach-mini2440.c
@@ -535,6 +535,7 @@
 	&mini2440_button_device,
 	&s3c_device_nand,
 	&s3c_device_sdi,
+	&s3c2440_device_dma,
 	&s3c_device_iis,
 	&uda1340_codec,
 	&mini2440_audio,
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
index 571f95c..ccc3ab8 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
@@ -393,8 +393,7 @@
 
 static struct i2c_driver wlf_gf_module_driver = {
 	.driver = {
-		.name = "wlf-gf-module",
-		.owner = THIS_MODULE,
+		.name = "wlf-gf-module"
 	},
 	.probe = wlf_gf_module_probe,
 	.id_table = wlf_gf_module_id,
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 4a48c9f..09817ba 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -22,7 +22,6 @@
 	select PM_GENERIC_DOMAINS
 	select RENESAS_IRQC
 	select SYS_SUPPORTS_SH_CMT
-	select PCI_DOMAINS if PCI
 
 config ARCH_RMOBILE
 	bool
diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c
index 3506327..78d3e85 100644
--- a/arch/arm/mach-shmobile/setup-r8a7790.c
+++ b/arch/arm/mach-shmobile/setup-r8a7790.c
@@ -28,7 +28,7 @@
 };
 
 DT_MACHINE_START(R8A7790_DT, "Generic R8A7790 (Flattened Device Tree)")
-	.smp_init	= shmobile_smp_init_fallback_ops,
+	.smp_init	= smp_init_ops(shmobile_smp_init_fallback_ops),
 	.smp		= smp_ops(r8a7790_smp_ops),
 	.init_early	= shmobile_init_delay,
 	.init_time	= rcar_gen2_timer_init,
diff --git a/arch/arm/mach-shmobile/setup-r8a7791.c b/arch/arm/mach-shmobile/setup-r8a7791.c
index 110e8b5..26e2d18 100644
--- a/arch/arm/mach-shmobile/setup-r8a7791.c
+++ b/arch/arm/mach-shmobile/setup-r8a7791.c
@@ -29,7 +29,7 @@
 };
 
 DT_MACHINE_START(R8A7791_DT, "Generic R8A7791 (Flattened Device Tree)")
-	.smp_init	= shmobile_smp_init_fallback_ops,
+	.smp_init	= smp_init_ops(shmobile_smp_init_fallback_ops),
 	.smp		= smp_ops(r8a7791_smp_ops),
 	.init_early	= shmobile_init_delay,
 	.init_time	= rcar_gen2_timer_init,
diff --git a/arch/arm/mach-spear/Kconfig b/arch/arm/mach-spear/Kconfig
index b7260c2..1b6cae5 100644
--- a/arch/arm/mach-spear/Kconfig
+++ b/arch/arm/mach-spear/Kconfig
@@ -20,7 +20,6 @@
 	select HAVE_ARM_TWD if SMP
 	select PINCTRL
 	select MFD_SYSCON
-	select MIGHT_HAVE_PCI
 	help
 	  Supports for ARM's SPEAR13XX family
 
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index 096ed21..b9863f9 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -32,6 +32,7 @@
 	default ARCH_SUNXI
 	select ARM_GIC
 	select ARM_PSCI
+	select ARCH_SUPPORTS_BIG_ENDIAN
 	select HAVE_ARM_ARCH_TIMER
 	select SUN5I_HSTIMER
 
diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c
index 95dca8c..2e2bde2 100644
--- a/arch/arm/mach-sunxi/sunxi.c
+++ b/arch/arm/mach-sunxi/sunxi.c
@@ -22,6 +22,7 @@
 	"allwinner,sun5i-a10s",
 	"allwinner,sun5i-a13",
 	"allwinner,sun5i-r8",
+	"nextthing,gr8",
 	NULL,
 };
 
diff --git a/arch/arm/mach-uniphier/Makefile b/arch/arm/mach-uniphier/Makefile
index 396afe1..6bea3d3 100644
--- a/arch/arm/mach-uniphier/Makefile
+++ b/arch/arm/mach-uniphier/Makefile
@@ -1 +1 @@
-obj-$(CONFIG_SMP)	+= platsmp.o headsmp.o
+obj- += dummy.o
diff --git a/arch/arm/mach-uniphier/headsmp.S b/arch/arm/mach-uniphier/headsmp.S
deleted file mode 100644
index c819dff..0000000
--- a/arch/arm/mach-uniphier/headsmp.S
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include <asm/cp15.h>
-
-ENTRY(uniphier_smp_trampoline)
-ARM_BE8(setend	be)			@ ensure we are in BE8 mode
-	mrc	p15, 0, r0, c0, c0, 5	@ MPIDR (Multiprocessor Affinity Reg)
-	and  	r2, r0, #0x3		@ CPU ID
-	ldr	r1, uniphier_smp_trampoline_jump
-	ldr	r3, uniphier_smp_trampoline_poll_addr
-	mrc	p15, 0, r0, c1, c0, 0	@ SCTLR (System Control Register)
-	orr	r0, r0, #CR_I		@ Enable ICache
-	bic	r0, r0, #(CR_C | CR_M)	@ Disable MMU and Dcache
-	mcr	p15, 0, r0, c1, c0, 0
-	b	1f			@ cache the following 5 instructions
-0:	wfe
-1:	ldr	r0, [r3]
-	cmp	r0, r2
-	bxeq	r1			@ branch to secondary_startup
-	b	0b
-	.globl	uniphier_smp_trampoline_jump
-uniphier_smp_trampoline_jump:
-	.word	0			@ set virt_to_phys(secondary_startup)
-	.globl	uniphier_smp_trampoline_poll_addr
-uniphier_smp_trampoline_poll_addr:
-	.word	0			@ set CPU ID to be kicked to this reg
-	.globl	uniphier_smp_trampoline_end
-uniphier_smp_trampoline_end:
-ENDPROC(uniphier_smp_trampoline)
diff --git a/arch/arm/mach-uniphier/platsmp.c b/arch/arm/mach-uniphier/platsmp.c
deleted file mode 100644
index 9978c41..0000000
--- a/arch/arm/mach-uniphier/platsmp.c
+++ /dev/null
@@ -1,209 +0,0 @@
-/*
- * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#define pr_fmt(fmt)		"uniphier: " fmt
-
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/ioport.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/sizes.h>
-#include <asm/cacheflush.h>
-#include <asm/hardware/cache-uniphier.h>
-#include <asm/pgtable.h>
-#include <asm/smp.h>
-#include <asm/smp_scu.h>
-
-/*
- * The secondary CPUs check this register from the boot ROM for the jump
- * destination.  After that, it can be reused as a scratch register.
- */
-#define UNIPHIER_SMPCTRL_ROM_RSV2	0x208
-
-static void __iomem *uniphier_smp_rom_boot_rsv2;
-static unsigned int uniphier_smp_max_cpus;
-
-extern char uniphier_smp_trampoline;
-extern char uniphier_smp_trampoline_jump;
-extern char uniphier_smp_trampoline_poll_addr;
-extern char uniphier_smp_trampoline_end;
-
-/*
- * Copy trampoline code to the tail of the 1st section of the page table used
- * in the boot ROM.  This area is directly accessible by the secondary CPUs
- * for all the UniPhier SoCs.
- */
-static const phys_addr_t uniphier_smp_trampoline_dest_end = SECTION_SIZE;
-static phys_addr_t uniphier_smp_trampoline_dest;
-
-static int __init uniphier_smp_copy_trampoline(phys_addr_t poll_addr)
-{
-	size_t trmp_size;
-	static void __iomem *trmp_base;
-
-	if (!uniphier_cache_l2_is_enabled()) {
-		pr_warn("outer cache is needed for SMP, but not enabled\n");
-		return -ENODEV;
-	}
-
-	uniphier_cache_l2_set_locked_ways(1);
-
-	outer_flush_all();
-
-	trmp_size = &uniphier_smp_trampoline_end - &uniphier_smp_trampoline;
-	uniphier_smp_trampoline_dest = uniphier_smp_trampoline_dest_end -
-								trmp_size;
-
-	uniphier_cache_l2_touch_range(uniphier_smp_trampoline_dest,
-				      uniphier_smp_trampoline_dest_end);
-
-	trmp_base = ioremap_cache(uniphier_smp_trampoline_dest, trmp_size);
-	if (!trmp_base) {
-		pr_err("failed to map trampoline destination area\n");
-		return -ENOMEM;
-	}
-
-	memcpy(trmp_base, &uniphier_smp_trampoline, trmp_size);
-
-	writel(virt_to_phys(secondary_startup),
-	       trmp_base + (&uniphier_smp_trampoline_jump -
-			    &uniphier_smp_trampoline));
-
-	writel(poll_addr, trmp_base + (&uniphier_smp_trampoline_poll_addr -
-				       &uniphier_smp_trampoline));
-
-	flush_cache_all();	/* flush out trampoline code to outer cache */
-
-	iounmap(trmp_base);
-
-	return 0;
-}
-
-static int __init uniphier_smp_prepare_trampoline(unsigned int max_cpus)
-{
-	struct device_node *np;
-	struct resource res;
-	phys_addr_t rom_rsv2_phys;
-	int ret;
-
-	np = of_find_compatible_node(NULL, NULL, "socionext,uniphier-smpctrl");
-	ret = of_address_to_resource(np, 0, &res);
-	of_node_put(np);
-	if (ret) {
-		pr_err("failed to get resource of SMP control\n");
-		return ret;
-	}
-
-	rom_rsv2_phys = res.start + UNIPHIER_SMPCTRL_ROM_RSV2;
-
-	ret = uniphier_smp_copy_trampoline(rom_rsv2_phys);
-	if (ret)
-		return ret;
-
-	uniphier_smp_rom_boot_rsv2 = ioremap(rom_rsv2_phys, SZ_4);
-	if (!uniphier_smp_rom_boot_rsv2) {
-		pr_err("failed to map ROM_BOOT_RSV2 register\n");
-		return -ENOMEM;
-	}
-
-	writel(uniphier_smp_trampoline_dest, uniphier_smp_rom_boot_rsv2);
-	asm("sev"); /* Bring up all secondary CPUs to the trampoline code */
-
-	uniphier_smp_max_cpus = max_cpus;	/* save for later use */
-
-	return 0;
-}
-
-static void __init uniphier_smp_unprepare_trampoline(void)
-{
-	iounmap(uniphier_smp_rom_boot_rsv2);
-
-	if (uniphier_smp_trampoline_dest)
-		outer_inv_range(uniphier_smp_trampoline_dest,
-				uniphier_smp_trampoline_dest_end);
-
-	uniphier_cache_l2_set_locked_ways(0);
-}
-
-static int __init uniphier_smp_enable_scu(void)
-{
-	unsigned long scu_base_phys = 0;
-	void __iomem *scu_base;
-
-	if (scu_a9_has_base())
-		scu_base_phys = scu_a9_get_base();
-
-	if (!scu_base_phys) {
-		pr_err("failed to get scu base\n");
-		return -ENODEV;
-	}
-
-	scu_base = ioremap(scu_base_phys, SZ_128);
-	if (!scu_base) {
-		pr_err("failed to map scu base\n");
-		return -ENOMEM;
-	}
-
-	scu_enable(scu_base);
-	iounmap(scu_base);
-
-	return 0;
-}
-
-static void __init uniphier_smp_prepare_cpus(unsigned int max_cpus)
-{
-	static cpumask_t only_cpu_0 = { CPU_BITS_CPU0 };
-	int ret;
-
-	ret = uniphier_smp_prepare_trampoline(max_cpus);
-	if (ret)
-		goto err;
-
-	ret = uniphier_smp_enable_scu();
-	if (ret)
-		goto err;
-
-	return;
-err:
-	pr_warn("disabling SMP\n");
-	init_cpu_present(&only_cpu_0);
-	uniphier_smp_unprepare_trampoline();
-}
-
-static int __init uniphier_smp_boot_secondary(unsigned int cpu,
-					      struct task_struct *idle)
-{
-	if (WARN_ON_ONCE(!uniphier_smp_rom_boot_rsv2))
-		return -EFAULT;
-
-	writel(cpu, uniphier_smp_rom_boot_rsv2);
-	readl(uniphier_smp_rom_boot_rsv2); /* relax */
-
-	asm("sev"); /* wake up secondary CPUs sleeping in the trampoline */
-
-	if (cpu == uniphier_smp_max_cpus - 1) {
-		/* clean up resources if this is the last CPU */
-		uniphier_smp_unprepare_trampoline();
-	}
-
-	return 0;
-}
-
-static const struct smp_operations uniphier_smp_ops __initconst = {
-	.smp_prepare_cpus	= uniphier_smp_prepare_cpus,
-	.smp_boot_secondary	= uniphier_smp_boot_secondary,
-};
-CPU_METHOD_OF_DECLARE(uniphier_smp, "socionext,uniphier-smp",
-		      &uniphier_smp_ops);
diff --git a/arch/arm/mach-versatile/Kconfig b/arch/arm/mach-versatile/Kconfig
index b0cc262..c257d40 100644
--- a/arch/arm/mach-versatile/Kconfig
+++ b/arch/arm/mach-versatile/Kconfig
@@ -9,7 +9,6 @@
 	select CPU_ARM926T
 	select ICST
 	select MFD_SYSCON
-	select MIGHT_HAVE_PCI
 	select PLAT_VERSATILE
 	select POWER_RESET
 	select POWER_RESET_VERSATILE
diff --git a/arch/arm/mm/cache-uniphier.c b/arch/arm/mm/cache-uniphier.c
index c8e2f49..dfe97b4 100644
--- a/arch/arm/mm/cache-uniphier.c
+++ b/arch/arm/mm/cache-uniphier.c
@@ -1,5 +1,6 @@
 /*
- * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -43,27 +44,15 @@
 #define    UNIPHIER_SSCOPE_CM_SYNC		0x8	/* sync (drain bufs) */
 #define    UNIPHIER_SSCOPE_CM_FLUSH_PREFETCH	0x9	/* flush p-fetch buf */
 #define UNIPHIER_SSCOQM		0x248	/* Cache Operation Queue Mode */
-#define    UNIPHIER_SSCOQM_TID_MASK		(0x3 << 21)
-#define    UNIPHIER_SSCOQM_TID_LRU_DATA		(0x0 << 21)
-#define    UNIPHIER_SSCOQM_TID_LRU_INST		(0x1 << 21)
-#define    UNIPHIER_SSCOQM_TID_WAY		(0x2 << 21)
 #define    UNIPHIER_SSCOQM_S_MASK		(0x3 << 17)
 #define    UNIPHIER_SSCOQM_S_RANGE		(0x0 << 17)
 #define    UNIPHIER_SSCOQM_S_ALL		(0x1 << 17)
-#define    UNIPHIER_SSCOQM_S_WAY		(0x2 << 17)
 #define    UNIPHIER_SSCOQM_CE			BIT(15)	/* notify completion */
 #define    UNIPHIER_SSCOQM_CM_INV		0x0	/* invalidate */
 #define    UNIPHIER_SSCOQM_CM_CLEAN		0x1	/* clean */
 #define    UNIPHIER_SSCOQM_CM_FLUSH		0x2	/* flush */
-#define    UNIPHIER_SSCOQM_CM_PREFETCH		0x3	/* prefetch to cache */
-#define    UNIPHIER_SSCOQM_CM_PREFETCH_BUF	0x4	/* prefetch to pf-buf */
-#define    UNIPHIER_SSCOQM_CM_TOUCH		0x5	/* touch */
-#define    UNIPHIER_SSCOQM_CM_TOUCH_ZERO	0x6	/* touch to zero */
-#define    UNIPHIER_SSCOQM_CM_TOUCH_DIRTY	0x7	/* touch with dirty */
 #define UNIPHIER_SSCOQAD	0x24c	/* Cache Operation Queue Address */
 #define UNIPHIER_SSCOQSZ	0x250	/* Cache Operation Queue Size */
-#define UNIPHIER_SSCOQMASK	0x254	/* Cache Operation Queue Address Mask */
-#define UNIPHIER_SSCOQWN	0x258	/* Cache Operation Queue Way Number */
 #define UNIPHIER_SSCOPPQSEF	0x25c	/* Cache Operation Queue Set Complete*/
 #define    UNIPHIER_SSCOPPQSEF_FE		BIT(1)
 #define    UNIPHIER_SSCOPPQSEF_OE		BIT(0)
@@ -72,9 +61,6 @@
 #define    UNIPHIER_SSCOLPQS_EST		BIT(1)
 #define    UNIPHIER_SSCOLPQS_QST		BIT(0)
 
-/* Is the touch/pre-fetch destination specified by ways? */
-#define UNIPHIER_SSCOQM_TID_IS_WAY(op) \
-		((op & UNIPHIER_SSCOQM_TID_MASK) == UNIPHIER_SSCOQM_TID_WAY)
 /* Is the operation region specified by address range? */
 #define UNIPHIER_SSCOQM_S_IS_RANGE(op) \
 		((op & UNIPHIER_SSCOQM_S_MASK) == UNIPHIER_SSCOQM_S_RANGE)
@@ -178,11 +164,6 @@
 			writel_relaxed(start, data->op_base + UNIPHIER_SSCOQAD);
 			writel_relaxed(size, data->op_base + UNIPHIER_SSCOQSZ);
 		}
-
-		/* set target ways if needed */
-		if (unlikely(UNIPHIER_SSCOQM_TID_IS_WAY(operation)))
-			writel_relaxed(data->way_locked_mask,
-				       data->op_base + UNIPHIER_SSCOQWN);
 	} while (unlikely(readl_relaxed(data->op_base + UNIPHIER_SSCOPPQSEF) &
 			  (UNIPHIER_SSCOPPQSEF_FE | UNIPHIER_SSCOPPQSEF_OE)));
 
@@ -338,46 +319,8 @@
 		__uniphier_cache_sync(data);
 }
 
-int __init uniphier_cache_l2_is_enabled(void)
-{
-	struct uniphier_cache_data *data;
-
-	data = list_first_entry_or_null(&uniphier_cache_list,
-					struct uniphier_cache_data, list);
-	if (!data)
-		return 0;
-
-	return !!(readl_relaxed(data->ctrl_base + UNIPHIER_SSCC) &
-		  UNIPHIER_SSCC_ON);
-}
-
-void __init uniphier_cache_l2_touch_range(unsigned long start,
-					  unsigned long end)
-{
-	struct uniphier_cache_data *data;
-
-	data = list_first_entry_or_null(&uniphier_cache_list,
-					struct uniphier_cache_data, list);
-	if (data)
-		__uniphier_cache_maint_range(data, start, end,
-					     UNIPHIER_SSCOQM_TID_WAY |
-					     UNIPHIER_SSCOQM_CM_TOUCH);
-}
-
-void __init uniphier_cache_l2_set_locked_ways(u32 way_mask)
-{
-	struct uniphier_cache_data *data;
-
-	data = list_first_entry_or_null(&uniphier_cache_list,
-					struct uniphier_cache_data, list);
-	if (data)
-		__uniphier_cache_set_locked_ways(data, way_mask);
-}
-
 static const struct of_device_id uniphier_cache_match[] __initconst = {
-	{
-		.compatible = "socionext,uniphier-system-cache",
-	},
+	{ .compatible = "socionext,uniphier-system-cache" },
 	{ /* sentinel */ }
 };
 
diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c
index 78c8bf4..272f49b 100644
--- a/arch/arm/plat-orion/common.c
+++ b/arch/arm/plat-orion/common.c
@@ -52,21 +52,27 @@
 static void fill_resources(struct platform_device *device,
 			   struct resource *resources,
 			   resource_size_t mapbase,
-			   resource_size_t size,
-			   unsigned int irq)
+			   resource_size_t size)
 {
 	device->resource = resources;
 	device->num_resources = 1;
 	resources[0].flags = IORESOURCE_MEM;
 	resources[0].start = mapbase;
 	resources[0].end = mapbase + size;
+}
 
-	if (irq != NO_IRQ) {
-		device->num_resources++;
-		resources[1].flags = IORESOURCE_IRQ;
-		resources[1].start = irq;
-		resources[1].end = irq;
-	}
+static void fill_resources_irq(struct platform_device *device,
+			       struct resource *resources,
+			       resource_size_t mapbase,
+			       resource_size_t size,
+			       unsigned int irq)
+{
+	fill_resources(device, resources, mapbase, size);
+
+	device->num_resources++;
+	resources[1].flags = IORESOURCE_IRQ;
+	resources[1].start = irq;
+	resources[1].end = irq;
 }
 
 /*****************************************************************************
@@ -93,7 +99,7 @@
 	data->uartclk = uart_get_clk_rate(clk);
 	orion_uart->dev.platform_data = data;
 
-	fill_resources(orion_uart, resources, mapbase, 0xff, irq);
+	fill_resources_irq(orion_uart, resources, mapbase, 0xff, irq);
 	platform_device_register(orion_uart);
 }
 
@@ -305,8 +311,8 @@
 			    unsigned int tx_csum_limit)
 {
 	fill_resources(&orion_ge00_shared, orion_ge00_shared_resources,
-		       mapbase + 0x2000, SZ_16K - 1, NO_IRQ);
-	fill_resources(&orion_ge_mvmdio, orion_ge_mvmdio_resources,
+		       mapbase + 0x2000, SZ_16K - 1);
+	fill_resources_irq(&orion_ge_mvmdio, orion_ge_mvmdio_resources,
 			mapbase + 0x2004, 0x84 - 1, irq_err);
 	orion_ge00_shared_data.tx_csum_limit = tx_csum_limit;
 	ge_complete(&orion_ge00_shared_data,
@@ -354,11 +360,10 @@
 void __init orion_ge01_init(struct mv643xx_eth_platform_data *eth_data,
 			    unsigned long mapbase,
 			    unsigned long irq,
-			    unsigned long irq_err,
 			    unsigned int tx_csum_limit)
 {
 	fill_resources(&orion_ge01_shared, orion_ge01_shared_resources,
-		       mapbase + 0x2000, SZ_16K - 1, NO_IRQ);
+		       mapbase + 0x2000, SZ_16K - 1);
 	orion_ge01_shared_data.tx_csum_limit = tx_csum_limit;
 	ge_complete(&orion_ge01_shared_data,
 		    orion_ge01_resources, irq, &orion_ge01_shared,
@@ -404,11 +409,10 @@
 
 void __init orion_ge10_init(struct mv643xx_eth_platform_data *eth_data,
 			    unsigned long mapbase,
-			    unsigned long irq,
-			    unsigned long irq_err)
+			    unsigned long irq)
 {
 	fill_resources(&orion_ge10_shared, orion_ge10_shared_resources,
-		       mapbase + 0x2000, SZ_16K - 1, NO_IRQ);
+		       mapbase + 0x2000, SZ_16K - 1);
 	ge_complete(&orion_ge10_shared_data,
 		    orion_ge10_resources, irq, &orion_ge10_shared,
 		    NULL,
@@ -453,11 +457,10 @@
 
 void __init orion_ge11_init(struct mv643xx_eth_platform_data *eth_data,
 			    unsigned long mapbase,
-			    unsigned long irq,
-			    unsigned long irq_err)
+			    unsigned long irq)
 {
 	fill_resources(&orion_ge11_shared, orion_ge11_shared_resources,
-		       mapbase + 0x2000, SZ_16K - 1, NO_IRQ);
+		       mapbase + 0x2000, SZ_16K - 1);
 	ge_complete(&orion_ge11_shared_data,
 		    orion_ge11_resources, irq, &orion_ge11_shared,
 		    NULL,
@@ -467,37 +470,15 @@
 /*****************************************************************************
  * Ethernet switch
  ****************************************************************************/
-static struct resource orion_switch_resources[] = {
-	{
-		.start	= 0,
-		.end	= 0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device orion_switch_device = {
-	.name		= "dsa",
-	.id		= 0,
-	.num_resources	= 0,
-	.resource	= orion_switch_resources,
-};
-
-void __init orion_ge00_switch_init(struct dsa_platform_data *d, int irq)
+void __init orion_ge00_switch_init(struct dsa_platform_data *d)
 {
 	int i;
 
-	if (irq != NO_IRQ) {
-		orion_switch_resources[0].start = irq;
-		orion_switch_resources[0].end = irq;
-		orion_switch_device.num_resources = 1;
-	}
-
 	d->netdev = &orion_ge00.dev;
 	for (i = 0; i < d->nr_chips; i++)
 		d->chip[i].host_dev = &orion_ge_mvmdio.dev;
-	orion_switch_device.dev.platform_data = d;
 
-	platform_device_register(&orion_switch_device);
+	platform_device_register_data(NULL, "dsa", 0, d, sizeof(d));
 }
 
 /*****************************************************************************
@@ -538,7 +519,7 @@
 			   unsigned long freq_m)
 {
 	orion_i2c_pdata.freq_m = freq_m;
-	fill_resources(&orion_i2c, orion_i2c_resources, mapbase,
+	fill_resources_irq(&orion_i2c, orion_i2c_resources, mapbase,
 		       SZ_32 - 1, irq);
 	platform_device_register(&orion_i2c);
 }
@@ -548,7 +529,7 @@
 			     unsigned long freq_m)
 {
 	orion_i2c_1_pdata.freq_m = freq_m;
-	fill_resources(&orion_i2c_1, orion_i2c_1_resources, mapbase,
+	fill_resources_irq(&orion_i2c_1, orion_i2c_1_resources, mapbase,
 		       SZ_32 - 1, irq);
 	platform_device_register(&orion_i2c_1);
 }
@@ -576,14 +557,14 @@
 void __init orion_spi_init(unsigned long mapbase)
 {
 	fill_resources(&orion_spi, &orion_spi_resources,
-		       mapbase, SZ_512 - 1, NO_IRQ);
+		       mapbase, SZ_512 - 1);
 	platform_device_register(&orion_spi);
 }
 
 void __init orion_spi_1_init(unsigned long mapbase)
 {
 	fill_resources(&orion_spi_1, &orion_spi_1_resources,
-		       mapbase, SZ_512 - 1, NO_IRQ);
+		       mapbase, SZ_512 - 1);
 	platform_device_register(&orion_spi_1);
 }
 
@@ -741,7 +722,7 @@
 			    enum orion_ehci_phy_ver phy_version)
 {
 	orion_ehci_data.phy_version = phy_version;
-	fill_resources(&orion_ehci, orion_ehci_resources, mapbase, SZ_4K - 1,
+	fill_resources_irq(&orion_ehci, orion_ehci_resources, mapbase, SZ_4K - 1,
 		       irq);
 
 	platform_device_register(&orion_ehci);
@@ -765,7 +746,7 @@
 void __init orion_ehci_1_init(unsigned long mapbase,
 			      unsigned long irq)
 {
-	fill_resources(&orion_ehci_1, orion_ehci_1_resources,
+	fill_resources_irq(&orion_ehci_1, orion_ehci_1_resources,
 		       mapbase, SZ_4K - 1, irq);
 
 	platform_device_register(&orion_ehci_1);
@@ -789,7 +770,7 @@
 void __init orion_ehci_2_init(unsigned long mapbase,
 			      unsigned long irq)
 {
-	fill_resources(&orion_ehci_2, orion_ehci_2_resources,
+	fill_resources_irq(&orion_ehci_2, orion_ehci_2_resources,
 		       mapbase, SZ_4K - 1, irq);
 
 	platform_device_register(&orion_ehci_2);
@@ -819,7 +800,7 @@
 			    unsigned long irq)
 {
 	orion_sata.dev.platform_data = sata_data;
-	fill_resources(&orion_sata, orion_sata_resources,
+	fill_resources_irq(&orion_sata, orion_sata_resources,
 		       mapbase, 0x5000 - 1, irq);
 
 	platform_device_register(&orion_sata);
@@ -849,7 +830,7 @@
 			      unsigned long sram_size,
 			      unsigned long irq)
 {
-	fill_resources(&orion_crypto, orion_crypto_resources,
+	fill_resources_irq(&orion_crypto, orion_crypto_resources,
 		       mapbase, 0xffff, irq);
 	orion_crypto.num_resources = 3;
 	orion_crypto_resources[2].start = srambase;
diff --git a/arch/arm/plat-orion/include/plat/common.h b/arch/arm/plat-orion/include/plat/common.h
index 9e6d76a..9347f3c 100644
--- a/arch/arm/plat-orion/include/plat/common.h
+++ b/arch/arm/plat-orion/include/plat/common.h
@@ -47,21 +47,17 @@
 void __init orion_ge01_init(struct mv643xx_eth_platform_data *eth_data,
 			    unsigned long mapbase,
 			    unsigned long irq,
-			    unsigned long irq_err,
 			    unsigned int tx_csum_limit);
 
 void __init orion_ge10_init(struct mv643xx_eth_platform_data *eth_data,
 			    unsigned long mapbase,
-			    unsigned long irq,
-			    unsigned long irq_err);
+			    unsigned long irq);
 
 void __init orion_ge11_init(struct mv643xx_eth_platform_data *eth_data,
 			    unsigned long mapbase,
-			    unsigned long irq,
-			    unsigned long irq_err);
+			    unsigned long irq);
 
-void __init orion_ge00_switch_init(struct dsa_platform_data *d,
-				   int irq);
+void __init orion_ge00_switch_init(struct dsa_platform_data *d);
 
 void __init orion_i2c_init(unsigned long mapbase,
 			   unsigned long irq,
diff --git a/arch/arm/plat-pxa/Makefile b/arch/arm/plat-pxa/Makefile
index 557b134..2f06a2e 100644
--- a/arch/arm/plat-pxa/Makefile
+++ b/arch/arm/plat-pxa/Makefile
@@ -3,8 +3,6 @@
 #
 ccflags-$(CONFIG_ARCH_MMP) := -I$(srctree)/$(src)/include
 
-obj-$(CONFIG_ARCH_PXA)		:= dma.o
-
 obj-$(CONFIG_PXA3xx)		+= mfp.o
 obj-$(CONFIG_ARCH_MMP)		+= mfp.o
 
diff --git a/arch/arm/plat-pxa/dma.c b/arch/arm/plat-pxa/dma.c
deleted file mode 100644
index de2b061..0000000
--- a/arch/arm/plat-pxa/dma.c
+++ /dev/null
@@ -1,386 +0,0 @@
-/*
- *  linux/arch/arm/plat-pxa/dma.c
- *
- *  PXA DMA registration and IRQ dispatching
- *
- *  Author:	Nicolas Pitre
- *  Created:	Nov 15, 2001
- *  Copyright:	MontaVista Software Inc.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/errno.h>
-#include <linux/dma-mapping.h>
-
-#include <asm/irq.h>
-#include <asm/memory.h>
-#include <mach/hardware.h>
-#include <mach/dma.h>
-
-#define DMA_DEBUG_NAME		"pxa_dma"
-#define DMA_MAX_REQUESTERS	64
-
-struct dma_channel {
-	char *name;
-	pxa_dma_prio prio;
-	void (*irq_handler)(int, void *);
-	void *data;
-	spinlock_t lock;
-};
-
-static struct dma_channel *dma_channels;
-static int num_dma_channels;
-
-/*
- * Debug fs
- */
-#ifdef CONFIG_DEBUG_FS
-#include <linux/debugfs.h>
-#include <linux/uaccess.h>
-#include <linux/seq_file.h>
-
-static struct dentry *dbgfs_root, *dbgfs_state, **dbgfs_chan;
-
-static int dbg_show_requester_chan(struct seq_file *s, void *p)
-{
-	int chan = (int)s->private;
-	int i;
-	u32 drcmr;
-
-	seq_printf(s, "DMA channel %d requesters list :\n", chan);
-	for (i = 0; i < DMA_MAX_REQUESTERS; i++) {
-		drcmr = DRCMR(i);
-		if ((drcmr & DRCMR_CHLNUM) == chan)
-			seq_printf(s, "\tRequester %d (MAPVLD=%d)\n",
-				   i, !!(drcmr & DRCMR_MAPVLD));
-	}
-
-	return 0;
-}
-
-static inline int dbg_burst_from_dcmd(u32 dcmd)
-{
-	int burst = (dcmd >> 16) & 0x3;
-
-	return burst ? 4 << burst : 0;
-}
-
-static int is_phys_valid(unsigned long addr)
-{
-	return pfn_valid(__phys_to_pfn(addr));
-}
-
-#define DCSR_STR(flag) (dcsr & DCSR_##flag ? #flag" " : "")
-#define DCMD_STR(flag) (dcmd & DCMD_##flag ? #flag" " : "")
-
-static int dbg_show_descriptors(struct seq_file *s, void *p)
-{
-	int chan = (int)s->private;
-	int i, max_show = 20, burst, width;
-	u32 dcmd;
-	unsigned long phys_desc;
-	struct pxa_dma_desc *desc;
-	unsigned long flags;
-
-	spin_lock_irqsave(&dma_channels[chan].lock, flags);
-	phys_desc = DDADR(chan);
-
-	seq_printf(s, "DMA channel %d descriptors :\n", chan);
-	seq_printf(s, "[%03d] First descriptor unknown\n", 0);
-	for (i = 1; i < max_show && is_phys_valid(phys_desc); i++) {
-		desc = phys_to_virt(phys_desc);
-		dcmd = desc->dcmd;
-		burst = dbg_burst_from_dcmd(dcmd);
-		width = (1 << ((dcmd >> 14) & 0x3)) >> 1;
-
-		seq_printf(s, "[%03d] Desc at %08lx(virt %p)\n",
-			   i, phys_desc, desc);
-		seq_printf(s, "\tDDADR = %08x\n", desc->ddadr);
-		seq_printf(s, "\tDSADR = %08x\n", desc->dsadr);
-		seq_printf(s, "\tDTADR = %08x\n", desc->dtadr);
-		seq_printf(s, "\tDCMD  = %08x (%s%s%s%s%s%s%sburst=%d width=%d len=%d)\n",
-			   dcmd,
-			   DCMD_STR(INCSRCADDR), DCMD_STR(INCTRGADDR),
-			   DCMD_STR(FLOWSRC), DCMD_STR(FLOWTRG),
-			   DCMD_STR(STARTIRQEN), DCMD_STR(ENDIRQEN),
-			   DCMD_STR(ENDIAN), burst, width,
-			   dcmd & DCMD_LENGTH);
-		phys_desc = desc->ddadr;
-	}
-	if (i == max_show)
-		seq_printf(s, "[%03d] Desc at %08lx ... max display reached\n",
-			   i, phys_desc);
-	else
-		seq_printf(s, "[%03d] Desc at %08lx is %s\n",
-			   i, phys_desc, phys_desc == DDADR_STOP ?
-			   "DDADR_STOP" : "invalid");
-
-	spin_unlock_irqrestore(&dma_channels[chan].lock, flags);
-
-	return 0;
-}
-
-static int dbg_show_chan_state(struct seq_file *s, void *p)
-{
-	int chan = (int)s->private;
-	u32 dcsr, dcmd;
-	int burst, width;
-	static char *str_prio[] = { "high", "normal", "low" };
-
-	dcsr = DCSR(chan);
-	dcmd = DCMD(chan);
-	burst = dbg_burst_from_dcmd(dcmd);
-	width = (1 << ((dcmd >> 14) & 0x3)) >> 1;
-
-	seq_printf(s, "DMA channel %d\n", chan);
-	seq_printf(s, "\tPriority : %s\n", str_prio[dma_channels[chan].prio]);
-	seq_printf(s, "\tUnaligned transfer bit: %s\n",
-		   DALGN & (1 << chan) ? "yes" : "no");
-	seq_printf(s, "\tDCSR  = %08x (%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s)\n",
-		   dcsr, DCSR_STR(RUN), DCSR_STR(NODESC),
-		   DCSR_STR(STOPIRQEN), DCSR_STR(EORIRQEN),
-		   DCSR_STR(EORJMPEN), DCSR_STR(EORSTOPEN),
-		   DCSR_STR(SETCMPST), DCSR_STR(CLRCMPST),
-		   DCSR_STR(CMPST), DCSR_STR(EORINTR), DCSR_STR(REQPEND),
-		   DCSR_STR(STOPSTATE), DCSR_STR(ENDINTR),
-		   DCSR_STR(STARTINTR), DCSR_STR(BUSERR));
-
-	seq_printf(s, "\tDCMD  = %08x (%s%s%s%s%s%s%sburst=%d width=%d len=%d)\n",
-		   dcmd,
-		   DCMD_STR(INCSRCADDR), DCMD_STR(INCTRGADDR),
-		   DCMD_STR(FLOWSRC), DCMD_STR(FLOWTRG),
-		   DCMD_STR(STARTIRQEN), DCMD_STR(ENDIRQEN),
-		   DCMD_STR(ENDIAN), burst, width, dcmd & DCMD_LENGTH);
-	seq_printf(s, "\tDSADR = %08x\n", DSADR(chan));
-	seq_printf(s, "\tDTADR = %08x\n", DTADR(chan));
-	seq_printf(s, "\tDDADR = %08x\n", DDADR(chan));
-
-	return 0;
-}
-
-static int dbg_show_state(struct seq_file *s, void *p)
-{
-	/* basic device status */
-	seq_puts(s, "DMA engine status\n");
-	seq_printf(s, "\tChannel number: %d\n", num_dma_channels);
-
-	return 0;
-}
-
-#define DBGFS_FUNC_DECL(name) \
-static int dbg_open_##name(struct inode *inode, struct file *file) \
-{ \
-	return single_open(file, dbg_show_##name, inode->i_private); \
-} \
-static const struct file_operations dbg_fops_##name = { \
-	.owner		= THIS_MODULE, \
-	.open		= dbg_open_##name, \
-	.llseek		= seq_lseek, \
-	.read		= seq_read, \
-	.release	= single_release, \
-}
-
-DBGFS_FUNC_DECL(state);
-DBGFS_FUNC_DECL(chan_state);
-DBGFS_FUNC_DECL(descriptors);
-DBGFS_FUNC_DECL(requester_chan);
-
-static struct dentry *pxa_dma_dbg_alloc_chan(int ch, struct dentry *chandir)
-{
-	char chan_name[11];
-	struct dentry *chan, *chan_state = NULL, *chan_descr = NULL;
-	struct dentry *chan_reqs = NULL;
-	void *dt;
-
-	scnprintf(chan_name, sizeof(chan_name), "%d", ch);
-	chan = debugfs_create_dir(chan_name, chandir);
-	dt = (void *)ch;
-
-	if (chan)
-		chan_state = debugfs_create_file("state", 0400, chan, dt,
-						 &dbg_fops_chan_state);
-	if (chan_state)
-		chan_descr = debugfs_create_file("descriptors", 0400, chan, dt,
-						 &dbg_fops_descriptors);
-	if (chan_descr)
-		chan_reqs = debugfs_create_file("requesters", 0400, chan, dt,
-						&dbg_fops_requester_chan);
-	if (!chan_reqs)
-		goto err_state;
-
-	return chan;
-
-err_state:
-	debugfs_remove_recursive(chan);
-	return NULL;
-}
-
-static void pxa_dma_init_debugfs(void)
-{
-	int i;
-	struct dentry *chandir;
-
-	dbgfs_root = debugfs_create_dir(DMA_DEBUG_NAME, NULL);
-	if (IS_ERR(dbgfs_root) || !dbgfs_root)
-		goto err_root;
-
-	dbgfs_state = debugfs_create_file("state", 0400, dbgfs_root, NULL,
-					  &dbg_fops_state);
-	if (!dbgfs_state)
-		goto err_state;
-
-	dbgfs_chan = kmalloc(sizeof(*dbgfs_state) * num_dma_channels,
-			     GFP_KERNEL);
-	if (!dbgfs_chan)
-		goto err_alloc;
-
-	chandir = debugfs_create_dir("channels", dbgfs_root);
-	if (!chandir)
-		goto err_chandir;
-
-	for (i = 0; i < num_dma_channels; i++) {
-		dbgfs_chan[i] = pxa_dma_dbg_alloc_chan(i, chandir);
-		if (!dbgfs_chan[i])
-			goto err_chans;
-	}
-
-	return;
-err_chans:
-err_chandir:
-	kfree(dbgfs_chan);
-err_alloc:
-err_state:
-	debugfs_remove_recursive(dbgfs_root);
-err_root:
-	pr_err("pxa_dma: debugfs is not available\n");
-}
-
-static void __exit pxa_dma_cleanup_debugfs(void)
-{
-	debugfs_remove_recursive(dbgfs_root);
-}
-#else
-static inline void pxa_dma_init_debugfs(void) {}
-static inline void pxa_dma_cleanup_debugfs(void) {}
-#endif
-
-int pxa_request_dma (char *name, pxa_dma_prio prio,
-			void (*irq_handler)(int, void *),
-			void *data)
-{
-	unsigned long flags;
-	int i, found = 0;
-
-	/* basic sanity checks */
-	if (!name || !irq_handler)
-		return -EINVAL;
-
-	local_irq_save(flags);
-
-	do {
-		/* try grabbing a DMA channel with the requested priority */
-		for (i = 0; i < num_dma_channels; i++) {
-			if ((dma_channels[i].prio == prio) &&
-			    !dma_channels[i].name &&
-			    !pxad_toggle_reserved_channel(i)) {
-				found = 1;
-				break;
-			}
-		}
-		/* if requested prio group is full, try a hier priority */
-	} while (!found && prio--);
-
-	if (found) {
-		DCSR(i) = DCSR_STARTINTR|DCSR_ENDINTR|DCSR_BUSERR;
-		dma_channels[i].name = name;
-		dma_channels[i].irq_handler = irq_handler;
-		dma_channels[i].data = data;
-	} else {
-		printk (KERN_WARNING "No more available DMA channels for %s\n", name);
-		i = -ENODEV;
-	}
-
-	local_irq_restore(flags);
-	return i;
-}
-EXPORT_SYMBOL(pxa_request_dma);
-
-void pxa_free_dma (int dma_ch)
-{
-	unsigned long flags;
-
-	if (!dma_channels[dma_ch].name) {
-		printk (KERN_CRIT
-			"%s: trying to free channel %d which is already freed\n",
-			__func__, dma_ch);
-		return;
-	}
-
-	local_irq_save(flags);
-	DCSR(dma_ch) = DCSR_STARTINTR|DCSR_ENDINTR|DCSR_BUSERR;
-	dma_channels[dma_ch].name = NULL;
-	pxad_toggle_reserved_channel(dma_ch);
-	local_irq_restore(flags);
-}
-EXPORT_SYMBOL(pxa_free_dma);
-
-static irqreturn_t dma_irq_handler(int irq, void *dev_id)
-{
-	int i, dint = DINT, done = 0;
-	struct dma_channel *channel;
-
-	while (dint) {
-		i = __ffs(dint);
-		dint &= (dint - 1);
-		channel = &dma_channels[i];
-		if (channel->name && channel->irq_handler) {
-			channel->irq_handler(i, channel->data);
-			done++;
-		}
-	}
-	if (done)
-		return IRQ_HANDLED;
-	else
-		return IRQ_NONE;
-}
-
-int __init pxa_init_dma(int irq, int num_ch)
-{
-	int i, ret;
-
-	dma_channels = kzalloc(sizeof(struct dma_channel) * num_ch, GFP_KERNEL);
-	if (dma_channels == NULL)
-		return -ENOMEM;
-
-	/* dma channel priorities on pxa2xx processors:
-	 * ch 0 - 3,  16 - 19  <--> (0) DMA_PRIO_HIGH
-	 * ch 4 - 7,  20 - 23  <--> (1) DMA_PRIO_MEDIUM
-	 * ch 8 - 15, 24 - 31  <--> (2) DMA_PRIO_LOW
-	 */
-	for (i = 0; i < num_ch; i++) {
-		DCSR(i) = 0;
-		dma_channels[i].prio = min((i & 0xf) >> 2, DMA_PRIO_LOW);
-		spin_lock_init(&dma_channels[i].lock);
-	}
-
-	ret = request_irq(irq, dma_irq_handler, IRQF_SHARED, "DMA",
-			  dma_channels);
-	if (ret) {
-		printk (KERN_CRIT "Wow!  Can't register IRQ for DMA\n");
-		kfree(dma_channels);
-		return ret;
-	}
-	num_dma_channels = num_ch;
-
-	pxa_dma_init_debugfs();
-
-	return 0;
-}
diff --git a/arch/arm/plat-pxa/include/plat/dma.h b/arch/arm/plat-pxa/include/plat/dma.h
deleted file mode 100644
index ceba3e4..0000000
--- a/arch/arm/plat-pxa/include/plat/dma.h
+++ /dev/null
@@ -1,100 +0,0 @@
-#ifndef __PLAT_DMA_H
-#define __PLAT_DMA_H
-
-#define DMAC_REG(x)	(*((volatile u32 *)(DMAC_REGS_VIRT + (x))))
-
-#define DCSR(n)		DMAC_REG((n) << 2)
-#define DALGN		DMAC_REG(0x00a0)  /* DMA Alignment Register */
-#define DINT		DMAC_REG(0x00f0)  /* DMA Interrupt Register */
-#define DDADR(n)	DMAC_REG(0x0200 + ((n) << 4))
-#define DSADR(n)	DMAC_REG(0x0204 + ((n) << 4))
-#define DTADR(n)	DMAC_REG(0x0208 + ((n) << 4))
-#define DCMD(n)		DMAC_REG(0x020c + ((n) << 4))
-#define DRCMR(n)	DMAC_REG((((n) < 64) ? 0x0100 : 0x1100) + \
-				 (((n) & 0x3f) << 2))
-
-#define DCSR_RUN	(1 << 31)	/* Run Bit (read / write) */
-#define DCSR_NODESC	(1 << 30)	/* No-Descriptor Fetch (read / write) */
-#define DCSR_STOPIRQEN	(1 << 29)	/* Stop Interrupt Enable (read / write) */
-#define DCSR_REQPEND	(1 << 8)	/* Request Pending (read-only) */
-#define DCSR_STOPSTATE	(1 << 3)	/* Stop State (read-only) */
-#define DCSR_ENDINTR	(1 << 2)	/* End Interrupt (read / write) */
-#define DCSR_STARTINTR	(1 << 1)	/* Start Interrupt (read / write) */
-#define DCSR_BUSERR	(1 << 0)	/* Bus Error Interrupt (read / write) */
-
-#define DCSR_EORIRQEN	(1 << 28)       /* End of Receive Interrupt Enable (R/W) */
-#define DCSR_EORJMPEN	(1 << 27)       /* Jump to next descriptor on EOR */
-#define DCSR_EORSTOPEN	(1 << 26)       /* STOP on an EOR */
-#define DCSR_SETCMPST	(1 << 25)       /* Set Descriptor Compare Status */
-#define DCSR_CLRCMPST	(1 << 24)       /* Clear Descriptor Compare Status */
-#define DCSR_CMPST	(1 << 10)       /* The Descriptor Compare Status */
-#define DCSR_EORINTR	(1 << 9)        /* The end of Receive */
-
-#define DRCMR_MAPVLD	(1 << 7)	/* Map Valid (read / write) */
-#define DRCMR_CHLNUM	0x1f		/* mask for Channel Number (read / write) */
-
-#define DDADR_DESCADDR	0xfffffff0	/* Address of next descriptor (mask) */
-#define DDADR_STOP	(1 << 0)	/* Stop (read / write) */
-
-#define DCMD_INCSRCADDR	(1 << 31)	/* Source Address Increment Setting. */
-#define DCMD_INCTRGADDR	(1 << 30)	/* Target Address Increment Setting. */
-#define DCMD_FLOWSRC	(1 << 29)	/* Flow Control by the source. */
-#define DCMD_FLOWTRG	(1 << 28)	/* Flow Control by the target. */
-#define DCMD_STARTIRQEN	(1 << 22)	/* Start Interrupt Enable */
-#define DCMD_ENDIRQEN	(1 << 21)	/* End Interrupt Enable */
-#define DCMD_ENDIAN	(1 << 18)	/* Device Endian-ness. */
-#define DCMD_BURST8	(1 << 16)	/* 8 byte burst */
-#define DCMD_BURST16	(2 << 16)	/* 16 byte burst */
-#define DCMD_BURST32	(3 << 16)	/* 32 byte burst */
-#define DCMD_WIDTH1	(1 << 14)	/* 1 byte width */
-#define DCMD_WIDTH2	(2 << 14)	/* 2 byte width (HalfWord) */
-#define DCMD_WIDTH4	(3 << 14)	/* 4 byte width (Word) */
-#define DCMD_LENGTH	0x01fff		/* length mask (max = 8K - 1) */
-
-/*
- * Descriptor structure for PXA's DMA engine
- * Note: this structure must always be aligned to a 16-byte boundary.
- */
-
-typedef struct pxa_dma_desc {
-	volatile u32 ddadr;	/* Points to the next descriptor + flags */
-	volatile u32 dsadr;	/* DSADR value for the current transfer */
-	volatile u32 dtadr;	/* DTADR value for the current transfer */
-	volatile u32 dcmd;	/* DCMD value for the current transfer */
-} pxa_dma_desc;
-
-typedef enum {
-	DMA_PRIO_HIGH = 0,
-	DMA_PRIO_MEDIUM = 1,
-	DMA_PRIO_LOW = 2
-} pxa_dma_prio;
-
-/*
- * DMA registration
- */
-
-int __init pxa_init_dma(int irq, int num_ch);
-
-int pxa_request_dma (char *name,
-			 pxa_dma_prio prio,
-			 void (*irq_handler)(int, void *),
-			 void *data);
-
-void pxa_free_dma (int dma_ch);
-
-/*
- * Cooperation with pxa_dma + dmaengine while there remains at least one pxa
- * driver not converted to dmaengine.
- */
-#if defined(CONFIG_PXA_DMA)
-extern int pxad_toggle_reserved_channel(int legacy_channel);
-#else
-static inline int pxad_toggle_reserved_channel(int legacy_channel)
-{
-	return 0;
-}
-#endif
-
-extern void __init pxa2xx_set_dmac_info(int nb_channels, int nb_requestors);
-
-#endif /* __PLAT_DMA_H */
diff --git a/arch/arm/plat-samsung/include/plat/map-s5p.h b/arch/arm/plat-samsung/include/plat/map-s5p.h
index b63aeeb..0fe2828 100644
--- a/arch/arm/plat-samsung/include/plat/map-s5p.h
+++ b/arch/arm/plat-samsung/include/plat/map-s5p.h
@@ -14,10 +14,6 @@
 #define __ASM_PLAT_MAP_S5P_H __FILE__
 
 #define S5P_VA_CHIPID		S3C_ADDR(0x02000000)
-#define S5P_VA_CMU		S3C_ADDR(0x02100000)
-
-#define S5P_VA_DMC0		S3C_ADDR(0x02440000)
-#define S5P_VA_DMC1		S3C_ADDR(0x02480000)
 
 #define S5P_VA_COREPERI_BASE	S3C_ADDR(0x02800000)
 #define S5P_VA_COREPERI(x)	(S5P_VA_COREPERI_BASE + (x))
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index b6b3657..cfbdf02 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -3,6 +3,8 @@
 config ARCH_SUNXI
 	bool "Allwinner sunxi 64-bit SoC Family"
 	select GENERIC_IRQ_CHIP
+	select PINCTRL
+	select PINCTRL_SUN50I_A64
 	help
 	  This enables support for Allwinner sunxi based SoCs like the A64.
 
@@ -42,6 +44,13 @@
 	help
 	  This enables support for Marvell Berlin SoC Family
 
+config ARCH_BRCMSTB
+	bool "Broadcom Set-Top-Box SoCs"
+	select BRCMSTB_L2_IRQ
+	select GENERIC_IRQ_CHIP
+	help
+	  This enables support for Broadcom's ARMv8 Set Top Box SoCs
+
 config ARCH_EXYNOS
 	bool "ARMv8 based Samsung Exynos SoC family"
 	select COMMON_CLK_SAMSUNG
@@ -68,6 +77,7 @@
 	bool "Hisilicon SoC Family"
 	select ARM_TIMER_SP804
 	select HISILICON_IRQ_MBIGEN if PCI
+	select PINCTRL
 	help
 	  This enables support for Hisilicon ARMv8 SoC family
 
@@ -162,6 +172,8 @@
 	select GENERIC_CLOCKEVENTS
 	select GPIOLIB
 	select PINCTRL
+	select PM
+	select PM_GENERIC_DOMAINS
 	select RESET_CONTROLLER
 	help
 	  This enables support for the NVIDIA Tegra SoC family.
@@ -205,6 +217,11 @@
 	help
 	  This enables support for AppliedMicro X-Gene SOC Family
 
+config ARCH_ZX
+	bool "ZTE ZX SoC Family"
+	help
+	  This enables support for ZTE ZX SoC Family
+
 config ARCH_ZYNQMP
 	bool "Xilinx ZynqMP Family"
 	help
diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
index 6e199c9..6684f97 100644
--- a/arch/arm64/boot/dts/Makefile
+++ b/arch/arm64/boot/dts/Makefile
@@ -19,6 +19,7 @@
 dts-dirs += sprd
 dts-dirs += xilinx
 dts-dirs += lg
+dts-dirs += zte
 
 subdir-y	:= $(dts-dirs)
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
index 90a84c5..e6e3491 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
@@ -87,3 +87,14 @@
 	pinctrl-names = "default";
 };
 
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&i2c_A {
+	status = "okay";
+	pinctrl-0 = <&i2c_a_pins>;
+	pinctrl-names = "default";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts
index 6297907..03e3d76 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts
@@ -50,3 +50,9 @@
 	compatible = "amlogic,p200", "amlogic,meson-gxbb";
 	model = "Amlogic Meson GXBB P200 Development Board";
 };
+
+&i2c_B {
+	status = "okay";
+	pinctrl-0 = <&i2c_b_pins>;
+	pinctrl-names = "default";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
index f4f30f6..06a34dc 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
@@ -57,6 +57,19 @@
 		device_type = "memory";
 		reg = <0x0 0x0 0x0 0x40000000>;
 	};
+
+	usb_pwr: regulator-usb-pwrs {
+		compatible = "regulator-fixed";
+
+		regulator-name = "USB_PWR";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		/* signal name in schematic: USB_PWR_EN */
+		gpio = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 };
 
 /* This UART is brought out to the DB9 connector */
@@ -72,3 +85,25 @@
 	pinctrl-names = "default";
 };
 
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&usb0_phy {
+	status = "okay";
+	phy-supply = <&usb_pwr>;
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
index 54bb7c7..73f1593 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
@@ -52,6 +52,19 @@
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
+
+	usb_vbus: regulator-usb0-vbus {
+		compatible = "regulator-fixed";
+
+		regulator-name = "USB0_VBUS";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
 };
 
 &uart_AO {
@@ -60,3 +73,32 @@
 	pinctrl-names = "default";
 
 };
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&ethmac {
+	status = "okay";
+	pinctrl-0 = <&eth_pins>;
+	pinctrl-names = "default";
+};
+
+&usb0_phy {
+	status = "okay";
+	phy-supply = <&usb_vbus>;
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index bf6c8d0..610e0e1 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
@@ -45,6 +45,9 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/gpio/meson-gxbb-gpio.h>
 #include <dt-bindings/reset/amlogic,meson-gxbb-reset.h>
+#include <dt-bindings/clock/gxbb-clkc.h>
+#include <dt-bindings/clock/gxbb-aoclkc.h>
+#include <dt-bindings/reset/gxbb-aoclkc.h>
 
 / {
 	compatible = "amlogic,meson-gxbb";
@@ -99,6 +102,30 @@
 		method = "smc";
 	};
 
+	firmware {
+		sm: secure-monitor {
+			compatible = "amlogic,meson-gxbb-sm";
+		};
+	};
+
+	efuse: efuse {
+		compatible = "amlogic,meson-gxbb-efuse";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		sn: sn@14 {
+			reg = <0x14 0x10>;
+		};
+
+		eth_mac: eth_mac@34 {
+			reg = <0x34 0x10>;
+		};
+
+		bid: bid@46 {
+			reg = <0x46 0x30>;
+		};
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13
@@ -124,6 +151,25 @@
 		#size-cells = <2>;
 		ranges;
 
+		usb0_phy: phy@c0000000 {
+			compatible = "amlogic,meson-gxbb-usb2-phy";
+			#phy-cells = <0>;
+			reg = <0x0 0xc0000000 0x0 0x20>;
+			resets = <&reset RESET_USB_OTG>;
+			clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB0>;
+			clock-names = "usb_general", "usb";
+			status = "disabled";
+		};
+
+		usb1_phy: phy@c0000020 {
+			compatible = "amlogic,meson-gxbb-usb2-phy";
+			#phy-cells = <0>;
+			reg = <0x0 0xc0000020 0x0 0x20>;
+			clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1>;
+			clock-names = "usb_general", "usb";
+			status = "disabled";
+		};
+
 		cbus: cbus@c1100000 {
 			compatible = "simple-bus";
 			reg = <0x0 0xc1100000 0x0 0x100000>;
@@ -153,6 +199,27 @@
 				status = "disabled";
 			};
 
+			pwm_ab: pwm@8550 {
+				compatible = "amlogic,meson-gxbb-pwm";
+				reg = <0x0 0x08550 0x0 0x10>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm_cd: pwm@8650 {
+				compatible = "amlogic,meson-gxbb-pwm";
+				reg = <0x0 0x08650 0x0 0x10>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm_ef: pwm@86c0 {
+				compatible = "amlogic,meson-gxbb-pwm";
+				reg = <0x0 0x086c0 0x0 0x10>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
 			uart_C: serial@8700 {
 				compatible = "amlogic,meson-uart";
 				reg = <0x0 0x8700 0x0 0x14>;
@@ -160,6 +227,51 @@
 				clocks = <&xtal>;
 				status = "disabled";
 			};
+
+			watchdog@98d0 {
+				compatible = "amlogic,meson-gxbb-wdt";
+				reg = <0x0 0x098d0 0x0 0x10>;
+				clocks = <&xtal>;
+			};
+
+			spifc: spi@8c80 {
+				compatible = "amlogic,meson-gxbb-spifc";
+				reg = <0x0 0x08c80 0x0 0x80>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clkc CLKID_SPI>;
+				status = "disabled";
+			};
+
+			i2c_A: i2c@8500 {
+				compatible = "amlogic,meson-gxbb-i2c";
+				reg = <0x0 0x08500 0x0 0x20>;
+				interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc CLKID_I2C>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c_B: i2c@87c0 {
+				compatible = "amlogic,meson-gxbb-i2c";
+				reg = <0x0 0x087c0 0x0 0x20>;
+				interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc CLKID_I2C>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c_C: i2c@87e0 {
+				compatible = "amlogic,meson-gxbb-i2c";
+				reg = <0x0 0x087e0 0x0 0x20>;
+				interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc CLKID_I2C>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
 		};
 
 		gic: interrupt-controller@c4301000 {
@@ -203,6 +315,56 @@
 						function = "uart_ao";
 					};
 				};
+
+				remote_input_ao_pins: remote_input_ao {
+					mux {
+						groups = "remote_input_ao";
+						function = "remote_input_ao";
+					};
+				};
+
+				i2c_ao_pins: i2c_ao {
+					mux {
+						groups = "i2c_sck_ao",
+						       "i2c_sda_ao";
+						function = "i2c_ao";
+					};
+				};
+
+				pwm_ao_a_3_pins: pwm_ao_a_3 {
+					mux {
+						groups = "pwm_ao_a_3";
+						function = "pwm_ao_a_3";
+					};
+				};
+
+				pwm_ao_a_6_pins: pwm_ao_a_6 {
+					mux {
+						groups = "pwm_ao_a_6";
+						function = "pwm_ao_a_6";
+					};
+				};
+
+				pwm_ao_a_12_pins: pwm_ao_a_12 {
+					mux {
+						groups = "pwm_ao_a_12";
+						function = "pwm_ao_a_12";
+					};
+				};
+
+				pwm_ao_b_pins: pwm_ao_b {
+					mux {
+						groups = "pwm_ao_b";
+						function = "pwm_ao_b";
+					};
+				};
+			};
+
+			clkc_AO: clock-controller@040 {
+				compatible = "amlogic,gxbb-aoclkc";
+				reg = <0x0 0x00040 0x0 0x4>;
+				#clock-cells = <1>;
+				#reset-cells = <1>;
 			};
 
 			uart_AO: serial@4c0 {
@@ -212,6 +374,30 @@
 				clocks = <&xtal>;
 				status = "disabled";
 			};
+
+			ir: ir@580 {
+				compatible = "amlogic,meson-gxbb-ir";
+				reg = <0x0 0x00580 0x0 0x40>;
+				interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+
+			pwm_ab_AO: pwm@550 {
+				compatible = "amlogic,meson-gxbb-pwm";
+				reg = <0x0 0x0550 0x0 0x10>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			i2c_AO: i2c@500 {
+				compatible = "amlogic,meson-gxbb-i2c";
+				reg = <0x0 0x500 0x0 0x20>;
+				interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc CLKID_AO_I2C>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
 		};
 
 		periphs: periphs@c8834000 {
@@ -251,6 +437,16 @@
 					};
 				};
 
+				nor_pins: nor {
+					mux {
+						groups = "nor_d",
+						       "nor_q",
+						       "nor_c",
+						       "nor_cs";
+						function = "nor";
+					};
+				};
+
 				sdcard_pins: sdcard {
 					mux {
 						groups = "sdcard_d0",
@@ -263,6 +459,25 @@
 					};
 				};
 
+				sdio_pins: sdio {
+					mux {
+						groups = "sdio_d0",
+						       "sdio_d1",
+						       "sdio_d2",
+						       "sdio_d3",
+						       "sdio_cmd",
+						       "sdio_clk";
+						function = "sdio";
+					};
+				};
+
+				sdio_irq_pins: sdio_irq {
+					mux {
+						groups = "sdio_irq";
+						function = "sdio";
+					};
+				};
+
 				uart_a_pins: uart_a {
 					mux {
 						groups = "uart_tx_a",
@@ -287,6 +502,30 @@
 					};
 				};
 
+				i2c_a_pins: i2c_a {
+					mux {
+						groups = "i2c_sck_a",
+						       "i2c_sda_a";
+						function = "i2c_a";
+					};
+				};
+
+				i2c_b_pins: i2c_b {
+					mux {
+						groups = "i2c_sck_b",
+						       "i2c_sda_b";
+						function = "i2c_b";
+					};
+				};
+
+				i2c_c_pins: i2c_c {
+					mux {
+						groups = "i2c_sck_c",
+						       "i2c_sda_c";
+						function = "i2c_c";
+					};
+				};
+
 				eth_pins: eth_c {
 					mux {
 						groups = "eth_mdio",
@@ -306,6 +545,55 @@
 						function = "eth";
 					};
 				};
+
+				pwm_a_x_pins: pwm_a_x {
+					mux {
+						groups = "pwm_a_x";
+						function = "pwm_a_x";
+					};
+				};
+
+				pwm_a_y_pins: pwm_a_y {
+					mux {
+						groups = "pwm_a_y";
+						function = "pwm_a_y";
+					};
+				};
+
+				pwm_b_pins: pwm_b {
+					mux {
+						groups = "pwm_b";
+						function = "pwm_b";
+					};
+				};
+
+				pwm_d_pins: pwm_d {
+					mux {
+						groups = "pwm_d";
+						function = "pwm_d";
+					};
+				};
+
+				pwm_e_pins: pwm_e {
+					mux {
+						groups = "pwm_e";
+						function = "pwm_e";
+					};
+				};
+
+				pwm_f_x_pins: pwm_f_x {
+					mux {
+						groups = "pwm_f_x";
+						function = "pwm_f_x";
+					};
+				};
+
+				pwm_f_y_pins: pwm_f_y {
+					mux {
+						groups = "pwm_f_y";
+						function = "pwm_f_y";
+					};
+				};
 			};
 		};
 
@@ -321,6 +609,15 @@
 				#clock-cells = <1>;
 				reg = <0x0 0x0 0x0 0x3db>;
 			};
+
+			mailbox: mailbox@404 {
+				compatible = "amlogic,meson-gxbb-mhu";
+				reg = <0 0x404 0 0x4c>;
+				interrupts = <0 208 IRQ_TYPE_EDGE_RISING>,
+					     <0 209 IRQ_TYPE_EDGE_RISING>,
+					     <0 210 IRQ_TYPE_EDGE_RISING>;
+				#mbox-cells = <1>;
+			};
 		};
 
 		apb: apb@d0000000 {
@@ -331,14 +628,40 @@
 			ranges = <0x0 0x0 0x0 0xd0000000 0x0 0x200000>;
 		};
 
+		usb0: usb@c9000000 {
+			compatible = "amlogic,meson-gxbb-usb", "snps,dwc2";
+			reg = <0x0 0xc9000000 0x0 0x40000>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkc CLKID_USB0_DDR_BRIDGE>;
+			clock-names = "otg";
+			phys = <&usb0_phy>;
+			phy-names = "usb2-phy";
+			dr_mode = "host";
+			status = "disabled";
+		};
+
+		usb1: usb@c9100000 {
+			compatible = "amlogic,meson-gxbb-usb", "snps,dwc2";
+			reg = <0x0 0xc9100000 0x0 0x40000>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkc CLKID_USB1_DDR_BRIDGE>;
+			clock-names = "otg";
+			phys = <&usb1_phy>;
+			phy-names = "usb2-phy";
+			dr_mode = "host";
+			status = "disabled";
+		};
+
 		ethmac: ethernet@c9410000 {
-			compatible = "amlogic,meson6-dwmac", "snps,dwmac";
+			compatible = "amlogic,meson-gxbb-dwmac", "snps,dwmac";
 			reg = <0x0 0xc9410000 0x0 0x10000
 			       0x0 0xc8834540 0x0 0x4>;
 			interrupts = <0 8 1>;
 			interrupt-names = "macirq";
-			clocks = <&xtal>;
-			clock-names = "stmmaceth";
+			clocks = <&clkc CLKID_ETH>,
+				 <&clkc CLKID_FCLK_DIV2>,
+				 <&clkc CLKID_MPLL2>;
+			clock-names = "stmmaceth", "clkin0", "clkin1";
 			phy-mode = "rgmii";
 			status = "disabled";
 		};
diff --git a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi
index 1425ed4..72720e9 100644
--- a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi
+++ b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi
@@ -26,6 +26,8 @@
 			enable-method = "spin-table";
 			cpu-release-addr = <0x1 0x0000fff8>;
 			next-level-cache = <&xgene_L2_0>;
+			#clock-cells = <1>;
+			clocks = <&pmd0clk 0>;
 		};
 		cpu@001 {
 			device_type = "cpu";
@@ -34,6 +36,8 @@
 			enable-method = "spin-table";
 			cpu-release-addr = <0x1 0x0000fff8>;
 			next-level-cache = <&xgene_L2_0>;
+			#clock-cells = <1>;
+			clocks = <&pmd0clk 0>;
 		};
 		cpu@100 {
 			device_type = "cpu";
@@ -42,6 +46,8 @@
 			enable-method = "spin-table";
 			cpu-release-addr = <0x1 0x0000fff8>;
 			next-level-cache = <&xgene_L2_1>;
+			#clock-cells = <1>;
+			clocks = <&pmd1clk 0>;
 		};
 		cpu@101 {
 			device_type = "cpu";
@@ -50,6 +56,8 @@
 			enable-method = "spin-table";
 			cpu-release-addr = <0x1 0x0000fff8>;
 			next-level-cache = <&xgene_L2_1>;
+			#clock-cells = <1>;
+			clocks = <&pmd1clk 0>;
 		};
 		cpu@200 {
 			device_type = "cpu";
@@ -58,6 +66,8 @@
 			enable-method = "spin-table";
 			cpu-release-addr = <0x1 0x0000fff8>;
 			next-level-cache = <&xgene_L2_2>;
+			#clock-cells = <1>;
+			clocks = <&pmd2clk 0>;
 		};
 		cpu@201 {
 			device_type = "cpu";
@@ -66,6 +76,8 @@
 			enable-method = "spin-table";
 			cpu-release-addr = <0x1 0x0000fff8>;
 			next-level-cache = <&xgene_L2_2>;
+			#clock-cells = <1>;
+			clocks = <&pmd2clk 0>;
 		};
 		cpu@300 {
 			device_type = "cpu";
@@ -74,6 +86,8 @@
 			enable-method = "spin-table";
 			cpu-release-addr = <0x1 0x0000fff8>;
 			next-level-cache = <&xgene_L2_3>;
+			#clock-cells = <1>;
+			clocks = <&pmd3clk 0>;
 		};
 		cpu@301 {
 			device_type = "cpu";
@@ -82,6 +96,8 @@
 			enable-method = "spin-table";
 			cpu-release-addr = <0x1 0x0000fff8>;
 			next-level-cache = <&xgene_L2_3>;
+			#clock-cells = <1>;
+			clocks = <&pmd3clk 0>;
 		};
 		xgene_L2_0: l2-cache-0 {
 			compatible = "cache";
@@ -223,6 +239,46 @@
 				clock-output-names = "refclk";
 			};
 
+			pmdpll: pmdpll@170000f0 {
+				compatible = "apm,xgene-pcppll-v2-clock";
+				#clock-cells = <1>;
+				clocks = <&refclk 0>;
+				reg = <0x0 0x170000f0 0x0 0x10>;
+				clock-output-names = "pmdpll";
+			};
+
+			pmd0clk: pmd0clk@7e200200 {
+				compatible = "apm,xgene-pmd-clock";
+				#clock-cells = <1>;
+				clocks = <&pmdpll 0>;
+				reg = <0x0 0x7e200200 0x0 0x10>;
+				clock-output-names = "pmd0clk";
+			};
+
+			pmd1clk: pmd1clk@7e200210 {
+				compatible = "apm,xgene-pmd-clock";
+				#clock-cells = <1>;
+				clocks = <&pmdpll 0>;
+				reg = <0x0 0x7e200210 0x0 0x10>;
+				clock-output-names = "pmd1clk";
+			};
+
+			pmd2clk: pmd2clk@7e200220 {
+				compatible = "apm,xgene-pmd-clock";
+				#clock-cells = <1>;
+				clocks = <&pmdpll 0>;
+				reg = <0x0 0x7e200220 0x0 0x10>;
+				clock-output-names = "pmd2clk";
+			};
+
+			pmd3clk: pmd3clk@7e200230 {
+				compatible = "apm,xgene-pmd-clock";
+				#clock-cells = <1>;
+				clocks = <&pmdpll 0>;
+				reg = <0x0 0x7e200230 0x0 0x10>;
+				clock-output-names = "pmd3clk";
+			};
+
 			socpll: socpll@17000120 {
 				compatible = "apm,xgene-socpll-v2-clock";
 				#clock-cells = <1>;
@@ -453,6 +509,64 @@
 			};
 		};
 
+		pmu: pmu@78810000 {
+			compatible = "apm,xgene-pmu-v2";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			regmap-csw = <&csw>;
+			regmap-mcba = <&mcba>;
+			regmap-mcbb = <&mcbb>;
+			reg = <0x0 0x78810000 0x0 0x1000>;
+			interrupts = <0x0 0x22 0x4>;
+
+			pmul3c@7e610000 {
+				compatible = "apm,xgene-pmu-l3c";
+				reg = <0x0 0x7e610000 0x0 0x1000>;
+			};
+
+			pmuiob@7e940000 {
+				compatible = "apm,xgene-pmu-iob";
+				reg = <0x0 0x7e940000 0x0 0x1000>;
+			};
+
+			pmucmcb@7e710000 {
+				compatible = "apm,xgene-pmu-mcb";
+				reg = <0x0 0x7e710000 0x0 0x1000>;
+				enable-bit-index = <0>;
+			};
+
+			pmucmcb@7e730000 {
+				compatible = "apm,xgene-pmu-mcb";
+				reg = <0x0 0x7e730000 0x0 0x1000>;
+				enable-bit-index = <1>;
+			};
+
+			pmucmc@7e810000 {
+				compatible = "apm,xgene-pmu-mc";
+				reg = <0x0 0x7e810000 0x0 0x1000>;
+				enable-bit-index = <0>;
+			};
+
+			pmucmc@7e850000 {
+				compatible = "apm,xgene-pmu-mc";
+				reg = <0x0 0x7e850000 0x0 0x1000>;
+				enable-bit-index = <1>;
+			};
+
+			pmucmc@7e890000 {
+				compatible = "apm,xgene-pmu-mc";
+				reg = <0x0 0x7e890000 0x0 0x1000>;
+				enable-bit-index = <2>;
+			};
+
+			pmucmc@7e8d0000 {
+				compatible = "apm,xgene-pmu-mc";
+				reg = <0x0 0x7e8d0000 0x0 0x1000>;
+				enable-bit-index = <3>;
+			};
+		};
+
 		mailbox: mailbox@10540000 {
 			compatible = "apm,xgene-slimpro-mbox";
 			reg = <0x0 0x10540000 0x0 0x8000>;
@@ -472,6 +586,11 @@
 			mboxes = <&mailbox 0>;
 		};
 
+		hwmonslimpro {
+			compatible = "apm,xgene-slimpro-hwmon";
+			mboxes = <&mailbox 7>;
+		};
+
 		serial0: serial@10600000 {
 			device_type = "serial";
 			compatible = "ns16550";
@@ -508,10 +627,10 @@
 			dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
 				      0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
 			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
-			interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0x0 0x0 0x10 0x1
-					 0x0 0x0 0x0 0x2 &gic 0x0 0x0 0x0 0x11 0x1
-					 0x0 0x0 0x0 0x3 &gic 0x0 0x0 0x0 0x12 0x1
-					 0x0 0x0 0x0 0x4 &gic 0x0 0x0 0x0 0x13 0x1>;
+			interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0x0 0x0 0x10 0x4
+					 0x0 0x0 0x0 0x2 &gic 0x0 0x0 0x0 0x11 0x4
+					 0x0 0x0 0x0 0x3 &gic 0x0 0x0 0x0 0x12 0x4
+					 0x0 0x0 0x0 0x4 &gic 0x0 0x0 0x0 0x13 0x4>;
 			dma-coherent;
 			clocks = <&pcie0clk 0>;
 			msi-parent = <&v2m0>;
@@ -533,10 +652,10 @@
 			dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
 				      0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
 			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
-			interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0x0 0x0 0x16 0x1
-					 0x0 0x0 0x0 0x2 &gic 0x0 0x0 0x0 0x17 0x1
-					 0x0 0x0 0x0 0x3 &gic 0x0 0x0 0x0 0x18 0x1
-					 0x0 0x0 0x0 0x4 &gic 0x0 0x0 0x0 0x19 0x1>;
+			interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0x0 0x0 0x16 0x4
+					 0x0 0x0 0x0 0x2 &gic 0x0 0x0 0x0 0x17 0x4
+					 0x0 0x0 0x0 0x3 &gic 0x0 0x0 0x0 0x18 0x4
+					 0x0 0x0 0x0 0x4 &gic 0x0 0x0 0x0 0x19 0x4>;
 			dma-coherent;
 			clocks = <&pcie1clk 0>;
 			msi-parent = <&v2m0>;
diff --git a/arch/arm64/boot/dts/apm/apm-storm.dtsi b/arch/arm64/boot/dts/apm/apm-storm.dtsi
index 31ea70a..63be8e5 100644
--- a/arch/arm64/boot/dts/apm/apm-storm.dtsi
+++ b/arch/arm64/boot/dts/apm/apm-storm.dtsi
@@ -553,6 +553,64 @@
 			};
 		};
 
+		pmu: pmu@78810000 {
+			compatible = "apm,xgene-pmu-v2";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			regmap-csw = <&csw>;
+			regmap-mcba = <&mcba>;
+			regmap-mcbb = <&mcbb>;
+			reg = <0x0 0x78810000 0x0 0x1000>;
+			interrupts = <0x0 0x22 0x4>;
+
+			pmul3c@7e610000 {
+				compatible = "apm,xgene-pmu-l3c";
+				reg = <0x0 0x7e610000 0x0 0x1000>;
+			};
+
+			pmuiob@7e940000 {
+				compatible = "apm,xgene-pmu-iob";
+				reg = <0x0 0x7e940000 0x0 0x1000>;
+			};
+
+			pmucmcb@7e710000 {
+				compatible = "apm,xgene-pmu-mcb";
+				reg = <0x0 0x7e710000 0x0 0x1000>;
+				enable-bit-index = <0>;
+			};
+
+			pmucmcb@7e730000 {
+				compatible = "apm,xgene-pmu-mcb";
+				reg = <0x0 0x7e730000 0x0 0x1000>;
+				enable-bit-index = <1>;
+			};
+
+			pmucmc@7e810000 {
+				compatible = "apm,xgene-pmu-mc";
+				reg = <0x0 0x7e810000 0x0 0x1000>;
+				enable-bit-index = <0>;
+			};
+
+			pmucmc@7e850000 {
+				compatible = "apm,xgene-pmu-mc";
+				reg = <0x0 0x7e850000 0x0 0x1000>;
+				enable-bit-index = <1>;
+			};
+
+			pmucmc@7e890000 {
+				compatible = "apm,xgene-pmu-mc";
+				reg = <0x0 0x7e890000 0x0 0x1000>;
+				enable-bit-index = <2>;
+			};
+
+			pmucmc@7e8d0000 {
+				compatible = "apm,xgene-pmu-mc";
+				reg = <0x0 0x7e8d0000 0x0 0x1000>;
+				enable-bit-index = <3>;
+			};
+		};
+
 		pcie0: pcie@1f2b0000 {
 			status = "disabled";
 			device_type = "pci";
@@ -569,10 +627,10 @@
 			dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
 				      0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
 			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
-			interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc2 0x1
-					 0x0 0x0 0x0 0x2 &gic 0x0 0xc3 0x1
-					 0x0 0x0 0x0 0x3 &gic 0x0 0xc4 0x1
-					 0x0 0x0 0x0 0x4 &gic 0x0 0xc5 0x1>;
+			interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc2 0x4
+					 0x0 0x0 0x0 0x2 &gic 0x0 0xc3 0x4
+					 0x0 0x0 0x0 0x3 &gic 0x0 0xc4 0x4
+					 0x0 0x0 0x0 0x4 &gic 0x0 0xc5 0x4>;
 			dma-coherent;
 			clocks = <&pcie0clk 0>;
 			msi-parent = <&msi>;
@@ -594,10 +652,10 @@
 			dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
 				      0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
 			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
-			interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc8 0x1
-					 0x0 0x0 0x0 0x2 &gic 0x0 0xc9 0x1
-					 0x0 0x0 0x0 0x3 &gic 0x0 0xca 0x1
-					 0x0 0x0 0x0 0x4 &gic 0x0 0xcb 0x1>;
+			interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc8 0x4
+					 0x0 0x0 0x0 0x2 &gic 0x0 0xc9 0x4
+					 0x0 0x0 0x0 0x3 &gic 0x0 0xca 0x4
+					 0x0 0x0 0x0 0x4 &gic 0x0 0xcb 0x4>;
 			dma-coherent;
 			clocks = <&pcie1clk 0>;
 			msi-parent = <&msi>;
@@ -619,10 +677,10 @@
 			dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
 				      0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
 			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
-			interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xce 0x1
-					 0x0 0x0 0x0 0x2 &gic 0x0 0xcf 0x1
-					 0x0 0x0 0x0 0x3 &gic 0x0 0xd0 0x1
-					 0x0 0x0 0x0 0x4 &gic 0x0 0xd1 0x1>;
+			interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xce 0x4
+					 0x0 0x0 0x0 0x2 &gic 0x0 0xcf 0x4
+					 0x0 0x0 0x0 0x3 &gic 0x0 0xd0 0x4
+					 0x0 0x0 0x0 0x4 &gic 0x0 0xd1 0x4>;
 			dma-coherent;
 			clocks = <&pcie2clk 0>;
 			msi-parent = <&msi>;
@@ -644,10 +702,10 @@
 			dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
 				      0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
 			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
-			interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xd4 0x1
-					 0x0 0x0 0x0 0x2 &gic 0x0 0xd5 0x1
-					 0x0 0x0 0x0 0x3 &gic 0x0 0xd6 0x1
-					 0x0 0x0 0x0 0x4 &gic 0x0 0xd7 0x1>;
+			interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xd4 0x4
+					 0x0 0x0 0x0 0x2 &gic 0x0 0xd5 0x4
+					 0x0 0x0 0x0 0x3 &gic 0x0 0xd6 0x4
+					 0x0 0x0 0x0 0x4 &gic 0x0 0xd7 0x4>;
 			dma-coherent;
 			clocks = <&pcie3clk 0>;
 			msi-parent = <&msi>;
@@ -669,10 +727,10 @@
 			dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
 				      0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
 			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
-			interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xda 0x1
-					 0x0 0x0 0x0 0x2 &gic 0x0 0xdb 0x1
-					 0x0 0x0 0x0 0x3 &gic 0x0 0xdc 0x1
-					 0x0 0x0 0x0 0x4 &gic 0x0 0xdd 0x1>;
+			interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xda 0x4
+					 0x0 0x0 0x0 0x2 &gic 0x0 0xdb 0x4
+					 0x0 0x0 0x0 0x3 &gic 0x0 0xdc 0x4
+					 0x0 0x0 0x0 0x4 &gic 0x0 0xdd 0x4>;
 			dma-coherent;
 			clocks = <&pcie4clk 0>;
 			msi-parent = <&msi>;
@@ -697,6 +755,11 @@
 			mboxes = <&mailbox 0>;
 		};
 
+		hwmonslimpro {
+			compatible = "apm,xgene-slimpro-hwmon";
+			mboxes = <&mailbox 7>;
+		};
+
 		serial0: serial@1c020000 {
 			status = "disabled";
 			device_type = "serial";
diff --git a/arch/arm64/boot/dts/broadcom/ns2.dtsi b/arch/arm64/boot/dts/broadcom/ns2.dtsi
index d4a12fa..d95dc40 100644
--- a/arch/arm64/boot/dts/broadcom/ns2.dtsi
+++ b/arch/arm64/boot/dts/broadcom/ns2.dtsi
@@ -299,6 +299,14 @@
 			};
 		};
 
+		pwm: pwm@66010000 {
+			compatible = "brcm,iproc-pwm";
+			reg = <0x66010000 0x28>;
+			clocks = <&osc>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
 		mdio_mux_iproc: mdio-mux@6602023c {
 			compatible = "brcm,mdio-mux-iproc";
 			reg = <0x6602023c 0x14>;
diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
index 1628315..6328a66 100644
--- a/arch/arm64/boot/dts/exynos/exynos7.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
@@ -10,6 +10,7 @@
  */
 
 #include <dt-bindings/clock/exynos7-clk.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
 
 / {
 	compatible = "samsung,exynos7";
@@ -473,10 +474,14 @@
 
 		timer {
 			compatible = "arm,armv8-timer";
-			interrupts = <1 13 0xff08>,
-				     <1 14 0xff08>,
-				     <1 11 0xff08>,
-				     <1 10 0xff08>;
+			interrupts = <GIC_PPI 13
+					(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 14
+					(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 11
+					(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 10
+					(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
 		};
 
 		pmu_system_controller: system-controller@105c0000 {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
index 9d3e9fe..dd9e919 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
@@ -56,12 +56,14 @@
 		gpio1 = &gpio2;
 		gpio2 = &gpio3;
 		gpio3 = &gpio4;
-		serial0 = &lpuart0;
-		serial1 = &lpuart1;
-		serial2 = &lpuart2;
-		serial3 = &lpuart3;
-		serial4 = &lpuart4;
-		serial5 = &lpuart5;
+		serial0 = &duart0;
+		serial1 = &duart1;
+		serial2 = &duart2;
+		serial3 = &duart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
 	};
 };
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
index 4084631..d2313e0 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
@@ -52,6 +52,14 @@
 
 	aliases {
 		crypto = &crypto;
+		serial0 = &duart0;
+		serial1 = &duart1;
+		serial2 = &duart2;
+		serial3 = &duart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
 	};
 };
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index a67e210..58635f7 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -247,6 +247,13 @@
 			bus-width = <4>;
 		};
 
+		ddr: memory-controller@1080000 {
+			compatible = "fsl,qoriq-memory-controller";
+			reg = <0x0 0x1080000 0x0 0x1000>;
+			interrupts = <0 144 0x4>;
+			big-endian;
+		};
+
 		dspi0: dspi@2100000 {
 			compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi";
 			#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts
index e8801fa..b0dd010 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts
@@ -57,6 +57,9 @@
 		serial1 = &serial1;
 	};
 
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
 };
 
 &esdhc {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts
index e127f0b..ad0ebb8 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts
@@ -56,6 +56,10 @@
 		serial0 = &serial0;
 		serial1 = &serial1;
 	};
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+	};
 };
 
 &esdhc {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
index e3b6034..d105976 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
@@ -588,6 +588,7 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
+			dma-coherent;
 			num-lanes = <4>;
 			bus-range = <0x0 0xff>;
 			ranges = <0x81000000 0x0 0x00000000 0x10 0x00010000 0x0 0x00010000   /* downstream I/O */
@@ -612,6 +613,7 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
+			dma-coherent;
 			num-lanes = <4>;
 			bus-range = <0x0 0xff>;
 			ranges = <0x81000000 0x0 0x00000000 0x12 0x00010000 0x0 0x00010000   /* downstream I/O */
@@ -636,6 +638,7 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
+			dma-coherent;
 			num-lanes = <8>;
 			bus-range = <0x0 0xff>;
 			ranges = <0x81000000 0x0 0x00000000 0x14 0x00010000 0x0 0x00010000   /* downstream I/O */
@@ -660,6 +663,7 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
+			dma-coherent;
 			num-lanes = <4>;
 			bus-range = <0x0 0xff>;
 			ranges = <0x81000000 0x0 0x00000000 0x16 0x00010000 0x0 0x00010000   /* downstream I/O */
@@ -715,4 +719,18 @@
 			interrupts = <0 12 4>;
 		};
 	};
+
+	ddr1: memory-controller@1080000 {
+		compatible = "fsl,qoriq-memory-controller";
+		reg = <0x0 0x1080000 0x0 0x1000>;
+		interrupts = <0 17 0x4>;
+		little-endian;
+	};
+
+	ddr2: memory-controller@1090000 {
+		compatible = "fsl,qoriq-memory-controller";
+		reg = <0x0 0x1090000 0x0 0x1000>;
+		interrupts = <0 18 0x4>;
+		little-endian;
+	};
 };
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
index 593c7e4..dba3c13 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
@@ -29,16 +29,56 @@
 	 * Reserve below regions from memory node:
 	 *
 	 *  0x05e0,0000 - 0x05ef,ffff: MCU firmware runtime using
+	 *  0x05f0,1000 - 0x05f0,1fff: Reboot reason
 	 *  0x06df,f000 - 0x06df,ffff: Mailbox message data
 	 *  0x0740,f000 - 0x0740,ffff: MCU firmware section
+	 *  0x21f0,0000 - 0x21ff,ffff: pstore/ramoops buffer
 	 *  0x3e00,0000 - 0x3fff,ffff: OP-TEE
 	 */
 	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x00000000 0x00000000 0x05e00000>,
-		      <0x00000000 0x05f00000 0x00000000 0x00eff000>,
+		      <0x00000000 0x05f00000 0x00000000 0x00001000>,
+		      <0x00000000 0x05f02000 0x00000000 0x00efd000>,
 		      <0x00000000 0x06e00000 0x00000000 0x0060f000>,
-		      <0x00000000 0x07410000 0x00000000 0x36bf0000>;
+		      <0x00000000 0x07410000 0x00000000 0x1aaf0000>,
+		      <0x00000000 0x22000000 0x00000000 0x1c000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ramoops@0x21f00000 {
+			compatible = "ramoops";
+			reg = <0x0 0x21f00000 0x0 0x00100000>;
+			record-size	= <0x00020000>;
+			console-size	= <0x00020000>;
+			ftrace-size	= <0x00020000>;
+		};
+
+		/* global autoconfigured region for contiguous allocations */
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0x00000000 0x08000000>;
+			linux,cma-default;
+		};
+	};
+
+	reboot-mode-syscon@5f01000 {
+		compatible = "syscon", "simple-mfd";
+		reg = <0x0 0x05f01000 0x0 0x00001000>;
+
+		reboot-mode {
+			compatible = "syscon-reboot-mode";
+			offset = <0x0>;
+
+			mode-normal	= <0x77665501>;
+			mode-bootloader	= <0x77665500>;
+			mode-recovery	= <0x77665502>;
+		};
 	};
 
 	soc {
@@ -55,6 +95,8 @@
 		};
 
 		uart1: uart@f7111000 {
+			assigned-clocks = <&sys_ctrl HI6220_UART1_SRC>;
+			assigned-clock-rates = <150000000>;
 			status = "ok";
 		};
 
@@ -372,3 +414,43 @@
 &uart3 {
 	label = "LS-UART1";
 };
+
+&ade {
+	status = "ok";
+};
+
+&dsi {
+	status = "ok";
+
+	ports {
+		/* 1 for output port */
+		port@1 {
+			reg = <1>;
+
+			dsi_out0: endpoint@0 {
+				remote-endpoint = <&adv7533_in>;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "ok";
+
+	adv7533: adv7533@39 {
+		compatible = "adi,adv7533";
+		reg = <0x39>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <1 2>;
+		pd-gpio = <&gpio0 4 0>;
+		adi,dsi-lanes = <4>;
+
+		port {
+			adv7533_in: endpoint {
+				remote-endpoint = <&dsi_out0>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
index 4f27041..17839db 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
@@ -262,6 +262,11 @@
 			#clock-cells = <1>;
 		};
 
+		medianoc_ade: medianoc_ade@f4520000 {
+			compatible = "syscon";
+			reg = <0x0 0xf4520000 0x0 0x4000>;
+		};
+
 		stub_clock: stub_clock {
 			compatible = "hisilicon,hi6220-stub-clk";
 			hisilicon,hi6220-clk-sram = <&sram>;
@@ -766,6 +771,7 @@
 			interrupts = <0x0 0x48 0x4>;
 			clocks = <&sys_ctrl 2>, <&sys_ctrl 1>;
 			clock-names = "ciu", "biu";
+			resets = <&sys_ctrl PERIPH_RSTDIS0_MMC0>;
 			bus-width = <0x8>;
 			vmmc-supply = <&ldo19>;
 			pinctrl-names = "default";
@@ -779,12 +785,16 @@
 			card-detect-delay = <200>;
 			hisilicon,peripheral-syscon = <&ao_ctrl>;
 			cap-sd-highspeed;
+			sd-uhs-sdr12;
+			sd-uhs-sdr25;
+			sd-uhs-sdr50;
 			reg = <0x0 0xf723e000 0x0 0x1000>;
 			interrupts = <0x0 0x49 0x4>;
 			#address-cells = <0x1>;
 			#size-cells = <0x0>;
 			clocks = <&sys_ctrl 4>, <&sys_ctrl 3>;
 			clock-names = "ciu", "biu";
+			resets = <&sys_ctrl PERIPH_RSTDIS0_MMC1>;
 			vqmmc-supply = <&ldo7>;
 			vmmc-supply = <&ldo10>;
 			bus-width = <0x4>;
@@ -802,6 +812,7 @@
 			interrupts = <0x0 0x4a 0x4>;
 			clocks = <&sys_ctrl HI6220_MMC2_CIUCLK>, <&sys_ctrl HI6220_MMC2_CLK>;
 			clock-names = "ciu", "biu";
+			resets = <&sys_ctrl PERIPH_RSTDIS0_MMC2>;
 			bus-width = <0x4>;
 			broken-cd;
 			pinctrl-names = "default", "idle";
@@ -850,5 +861,55 @@
 				};
 			};
 		};
+
+		ade: ade@f4100000 {
+			compatible = "hisilicon,hi6220-ade";
+			reg = <0x0 0xf4100000 0x0 0x7800>;
+			reg-names = "ade_base";
+			hisilicon,noc-syscon = <&medianoc_ade>;
+			resets = <&media_ctrl MEDIA_ADE>;
+			interrupts = <0 115 4>; /* ldi interrupt */
+
+			clocks = <&media_ctrl HI6220_ADE_CORE>,
+				 <&media_ctrl HI6220_CODEC_JPEG>,
+				 <&media_ctrl HI6220_ADE_PIX_SRC>;
+			/*clock name*/
+			clock-names  = "clk_ade_core",
+				       "clk_codec_jpeg",
+				       "clk_ade_pix";
+
+			assigned-clocks = <&media_ctrl HI6220_ADE_CORE>,
+				<&media_ctrl HI6220_CODEC_JPEG>;
+			assigned-clock-rates = <360000000>, <288000000>;
+			dma-coherent;
+			status = "disabled";
+
+			port {
+				ade_out: endpoint {
+					remote-endpoint = <&dsi_in>;
+				};
+			};
+		};
+
+		dsi: dsi@f4107800 {
+			compatible = "hisilicon,hi6220-dsi";
+			reg = <0x0 0xf4107800 0x0 0x100>;
+			clocks = <&media_ctrl  HI6220_DSI_PCLK>;
+			clock-names = "pclk";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				/* 0 for input port */
+				port@0 {
+					reg = <0>;
+					dsi_in: endpoint {
+						remote-endpoint = <&ade_out>;
+					};
+				};
+			};
+		};
 	};
 };
diff --git a/arch/arm64/boot/dts/hisilicon/hip05.dtsi b/arch/arm64/boot/dts/hisilicon/hip05.dtsi
index bf322ed..4b472a3 100644
--- a/arch/arm64/boot/dts/hisilicon/hip05.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hip05.dtsi
@@ -300,11 +300,6 @@
 			clock-frequency = <200000000>;
 		};
 
-		peri_c_subctrl: syscon@80000000 {
-			compatible = "hisilicon,hip05-perisubc", "syscon";
-			reg = < 0x0 0x80000000 0x0 0x10000>;
-		};
-
 		uart0: uart@80300000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x0 0x80300000 0x0 0x10000>;
diff --git a/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi b/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi
deleted file mode 100644
index b6a130c..0000000
--- a/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi
+++ /dev/null
@@ -1,180 +0,0 @@
-soc0: soc@000000000 {
-	#address-cells = <2>;
-	#size-cells = <2>;
-	device_type = "soc";
-	compatible = "simple-bus";
-	ranges = <0x0 0x0 0x0 0x0 0x1 0x0>;
-	chip-id = <0>;
-
-	soc0_mdio0: mdio@803c0000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "hisilicon,hns-mdio";
-		reg = <0x0 0x803c0000 0x0 0x10000>;
-		subctrl-vbase = <&peri_c_subctrl>;
-
-		soc0_phy0: ethernet-phy@0 {
-			reg = <0x0>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-		};
-		soc0_phy1: ethernet-phy@1 {
-			reg = <0x1>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-		};
-	};
-
-	dsaf0: dsa@c7000000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "hisilicon,hns-dsaf-v1";
-		mode = "6port-16rss";
-		interrupt-parent = <&mbigen_dsa>;
-
-		reg = <0x0 0xc5000000 0x0 0x890000
-		       0x0 0xc7000000 0x0 0x60000
-		       >;
-
-		reg-names = "ppe-base","dsaf-base";
-		subctrl-syscon = <&dsaf_subctrl>;
-		reset-field-offset = <0>;
-		interrupts = <
-			/* [14] ge fifo err 8 / xge 6**/
-			149 0x4 150 0x4 151 0x4 152 0x4
-			153 0x4 154 0x4  26 0x4 27 0x4
-			155 0x4 156 0x4 157 0x4 158 0x4 159 0x4 160 0x4
-			/* [12] rcb com 4*3**/
-			0x6 0x4 0x7 0x4 0x8 0x4 0x9 0x4
-			 16 0x4  17 0x4  18 0x4  19 0x4
-			 22 0x4  23 0x4  24 0x4  25 0x4
-			/* [8] ppe tnl 0-7***/
-			0x0 0x4 0x1 0x4 0x2 0x4 0x3 0x4
-			0x4 0x4 0x5 0x4 12 0x4 13 0x4
-			/* [21] dsaf event int 3+18**/
-			 128 0x4  129 0x4  130 0x4
-			0x83 0x4 0x84 0x4 0x85 0x4 0x86 0x4 0x87 0x4 0x88 0x4
-			0x89 0x4 0x8a 0x4 0x8b 0x4 0x8c 0x4 0x8d 0x4 0x8e 0x4
-			0x8f 0x4 0x90 0x4 0x91 0x4 0x92 0x4 0x93 0x4 0x94 0x4
-			/* [4] debug rcb 2*2*/
-			0xe 0x1 0xf 0x1 0x14 0x1 0x15 0x1
-			/* [256] sevice rcb 2*128*/
-			0x180 0x1 0x181 0x1 0x182 0x1 0x183 0x1
-			0x184 0x1 0x185 0x1 0x186 0x1 0x187 0x1
-			0x188 0x1 0x189 0x1 0x18a 0x1 0x18b 0x1
-			0x18c 0x1 0x18d 0x1 0x18e 0x1 0x18f 0x1
-			0x190 0x1 0x191 0x1 0x192 0x1 0x193 0x1
-			0x194 0x1 0x195 0x1 0x196 0x1 0x197 0x1
-			0x198 0x1 0x199 0x1 0x19a 0x1 0x19b 0x1
-			0x19c 0x1 0x19d 0x1 0x19e 0x1 0x19f 0x1
-			0x1a0 0x1 0x1a1 0x1 0x1a2 0x1 0x1a3 0x1
-			0x1a4 0x1 0x1a5 0x1 0x1a6 0x1 0x1a7 0x1
-			0x1a8 0x1 0x1a9 0x1 0x1aa 0x1 0x1ab 0x1
-			0x1ac 0x1 0x1ad 0x1 0x1ae 0x1 0x1af 0x1
-			0x1b0 0x1 0x1b1 0x1 0x1b2 0x1 0x1b3 0x1
-			0x1b4 0x1 0x1b5 0x1 0x1b6 0x1 0x1b7 0x1
-			0x1b8 0x1 0x1b9 0x1 0x1ba 0x1 0x1bb 0x1
-			0x1bc 0x1 0x1bd 0x1 0x1be 0x1 0x1bf 0x1
-			0x1c0 0x1 0x1c1 0x1 0x1c2 0x1 0x1c3 0x1
-			0x1c4 0x1 0x1c5 0x1 0x1c6 0x1 0x1c7 0x1
-			0x1c8 0x1 0x1c9 0x1 0x1ca 0x1 0x1cb 0x1
-			0x1cc 0x1 0x1cd 0x1 0x1ce 0x1 0x1cf 0x1
-			0x1d0 0x1 0x1d1 0x1 0x1d2 0x1 0x1d3 0x1
-			0x1d4 0x1 0x1d5 0x1 0x1d6 0x1 0x1d7 0x1
-			0x1d8 0x1 0x1d9 0x1 0x1da 0x1 0x1db 0x1
-			0x1dc 0x1 0x1dd 0x1 0x1de 0x1 0x1df 0x1
-			0x1e0 0x1 0x1e1 0x1 0x1e2 0x1 0x1e3 0x1
-			0x1e4 0x1 0x1e5 0x1 0x1e6 0x1 0x1e7 0x1
-			0x1e8 0x1 0x1e9 0x1 0x1ea 0x1 0x1eb 0x1
-			0x1ec 0x1 0x1ed 0x1 0x1ee 0x1 0x1ef 0x1
-			0x1f0 0x1 0x1f1 0x1 0x1f2 0x1 0x1f3 0x1
-			0x1f4 0x1 0x1f5 0x1 0x1f6 0x1 0x1f7 0x1
-			0x1f8 0x1 0x1f9 0x1 0x1fa 0x1 0x1fb 0x1
-			0x1fc 0x1 0x1fd 0x1 0x1fe 0x1 0x1ff 0x1
-			0x200 0x1 0x201 0x1 0x202 0x1 0x203 0x1
-			0x204 0x1 0x205 0x1 0x206 0x1 0x207 0x1
-			0x208 0x1 0x209 0x1 0x20a 0x1 0x20b 0x1
-			0x20c 0x1 0x20d 0x1 0x20e 0x1 0x20f 0x1
-			0x210 0x1 0x211 0x1 0x212 0x1 0x213 0x1
-			0x214 0x1 0x215 0x1 0x216 0x1 0x217 0x1
-			0x218 0x1 0x219 0x1 0x21a 0x1 0x21b 0x1
-			0x21c 0x1 0x21d 0x1 0x21e 0x1 0x21f 0x1
-			0x220 0x1 0x221 0x1 0x222 0x1 0x223 0x1
-			0x224 0x1 0x225 0x1 0x226 0x1 0x227 0x1
-			0x228 0x1 0x229 0x1 0x22a 0x1 0x22b 0x1
-			0x22c 0x1 0x22d 0x1 0x22e 0x1 0x22f 0x1
-			0x230 0x1 0x231 0x1 0x232 0x1 0x233 0x1
-			0x234 0x1 0x235 0x1 0x236 0x1 0x237 0x1
-			0x238 0x1 0x239 0x1 0x23a 0x1 0x23b 0x1
-			0x23c 0x1 0x23d 0x1 0x23e 0x1 0x23f 0x1
-			0x240 0x1 0x241 0x1 0x242 0x1 0x243 0x1
-			0x244 0x1 0x245 0x1 0x246 0x1 0x247 0x1
-			0x248 0x1 0x249 0x1 0x24a 0x1 0x24b 0x1
-			0x24c 0x1 0x24d 0x1 0x24e 0x1 0x24f 0x1
-			0x250 0x1 0x251 0x1 0x252 0x1 0x253 0x1
-			0x254 0x1 0x255 0x1 0x256 0x1 0x257 0x1
-			0x258 0x1 0x259 0x1 0x25a 0x1 0x25b 0x1
-			0x25c 0x1 0x25d 0x1 0x25e 0x1 0x25f 0x1
-			0x260 0x1 0x261 0x1 0x262 0x1 0x263 0x1
-			0x264 0x1 0x265 0x1 0x266 0x1 0x267 0x1
-			0x268 0x1 0x269 0x1 0x26a 0x1 0x26b 0x1
-			0x26c 0x1 0x26d 0x1 0x26e 0x1 0x26f 0x1
-			0x270 0x1 0x271 0x1 0x272 0x1 0x273 0x1
-			0x274 0x1 0x275 0x1 0x276 0x1 0x277 0x1
-			0x278 0x1 0x279 0x1 0x27a 0x1 0x27b 0x1
-			0x27c 0x1 0x27d 0x1 0x27e 0x1 0x27f 0x1>;
-		buf-size = <4096>;
-		desc-num = <1024>;
-		dma-coherent;
-
-		port@0 {
-			reg = <0>;
-			serdes-syscon = <&serdes_ctrl0>;
-		};
-		port@1 {
-			reg = <1>;
-			serdes-syscon = <&serdes_ctrl0>;
-		};
-		port@4 {
-			reg = <4>;
-			phy-handle = <&soc0_phy0>;
-			serdes-syscon = <&serdes_ctrl1>;
-		};
-		port@5 {
-			reg = <5>;
-			phy-handle = <&soc0_phy1>;
-			serdes-syscon = <&serdes_ctrl1>;
-		};
-	};
-
-	eth0: ethernet@0{
-		compatible = "hisilicon,hns-nic-v1";
-		ae-handle = <&dsaf0>;
-		port-idx-in-ae = <0>;
-		local-mac-address = [00 00 00 01 00 58];
-		status = "disabled";
-		dma-coherent;
-	};
-	eth1: ethernet@1{
-		compatible = "hisilicon,hns-nic-v1";
-		ae-handle = <&dsaf0>;
-		port-idx-in-ae = <1>;
-		local-mac-address = [00 00 00 01 00 59];
-		status = "disabled";
-		dma-coherent;
-	};
-	eth2: ethernet@4{
-		compatible = "hisilicon,hns-nic-v1";
-		ae-handle = <&dsaf0>;
-		port-idx-in-ae = <4>;
-		local-mac-address = [00 00 00 01 00 5a];
-		status = "disabled";
-		dma-coherent;
-	};
-	eth3: ethernet@5{
-		compatible = "hisilicon,hns-nic-v1";
-		ae-handle = <&dsaf0>;
-		port-idx-in-ae = <5>;
-		local-mac-address = [00 00 00 01 00 5b];
-		status = "disabled";
-		dma-coherent;
-	};
-};
diff --git a/arch/arm64/boot/dts/hisilicon/hip06-d03.dts b/arch/arm64/boot/dts/hisilicon/hip06-d03.dts
index f3e5323..f54b283 100644
--- a/arch/arm64/boot/dts/hisilicon/hip06-d03.dts
+++ b/arch/arm64/boot/dts/hisilicon/hip06-d03.dts
@@ -25,6 +25,34 @@
 	chosen { };
 };
 
+&eth0 {
+	status = "ok";
+};
+
+&eth1 {
+	status = "ok";
+};
+
+&eth2 {
+	status = "ok";
+};
+
+&eth3 {
+	status = "ok";
+};
+
+&sas0 {
+	status = "ok";
+};
+
+&sas1 {
+	status = "ok";
+};
+
+&sas2 {
+	status = "ok";
+};
+
 &usb_ohci {
 	status = "ok";
 };
diff --git a/arch/arm64/boot/dts/hisilicon/hip06.dtsi b/arch/arm64/boot/dts/hisilicon/hip06.dtsi
index 5927bc4..b548763 100644
--- a/arch/arm64/boot/dts/hisilicon/hip06.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hip06.dtsi
@@ -277,6 +277,39 @@
 			#interrupt-cells = <2>;
 			num-pins = <2>;
 		};
+
+		mbigen_sas1: intc_sas1 {
+			msi-parent = <&its_dsa 0x40000>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			num-pins = <128>;
+		};
+
+		mbigen_sas2: intc_sas2 {
+			msi-parent = <&its_dsa 0x40040>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			num-pins = <128>;
+		};
+	};
+
+	mbigen_dsa@c0080000 {
+		compatible = "hisilicon,mbigen-v2";
+		reg = <0x0 0xc0080000 0x0 0x10000>;
+
+		mbigen_dsaf0: intc_dsaf0 {
+			msi-parent = <&its_dsa 0x40800>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			num-pins = <409>;
+		};
+
+		mbigen_sas0: intc-sas0 {
+			msi-parent = <&its_dsa 0x40900>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			num-pins = <128>;
+		};
 	};
 
 	soc {
@@ -302,6 +335,338 @@
 			dma-coherent;
 			status = "disabled";
 		};
+
+		peri_c_subctrl: sub_ctrl_c@60000000 {
+			compatible = "hisilicon,peri-subctrl","syscon";
+			reg = <0 0x60000000 0x0 0x10000>;
+		};
+
+		dsa_subctrl: dsa_subctrl@c0000000 {
+			compatible = "hisilicon,dsa-subctrl", "syscon";
+			reg = <0x0 0xc0000000 0x0 0x10000>;
+		};
+
+		pcie_subctl: pcie_subctl@a0000000 {
+			compatible = "hisilicon,pcie-sas-subctrl", "syscon";
+			reg = <0x0 0xa0000000 0x0 0x10000>;
+		};
+
+		serdes_ctrl: sds_ctrl@c2200000 {
+			compatible = "syscon";
+			reg = <0 0xc2200000 0x0 0x80000>;
+		};
+
+		mdio@603c0000 {
+			compatible = "hisilicon,hns-mdio";
+			reg = <0x0 0x603c0000 0x0 0x1000>;
+			subctrl-vbase = <&peri_c_subctrl 0x338 0xa38 0x531c 0x5a1c>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			phy0: ethernet-phy@0 {
+				compatible = "ethernet-phy-ieee802.3-c22";
+				reg = <0>;
+			};
+
+			phy1: ethernet-phy@1 {
+				compatible = "ethernet-phy-ieee802.3-c22";
+				reg = <1>;
+			};
+		};
+
+		dsaf0: dsa@c7000000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "hisilicon,hns-dsaf-v2";
+			mode = "6port-16rss";
+			reg = <0x0 0xc5000000 0x0 0x890000
+			       0x0 0xc7000000 0x0 0x600000>;
+			reg-names = "ppe-base", "dsaf-base";
+			interrupt-parent = <&mbigen_dsaf0>;
+			subctrl-syscon = <&dsa_subctrl>;
+			reset-field-offset = <0>;
+			interrupts =
+			<576 1>, <577 1>, <578 1>, <579 1>, <580 1>,
+			<581 1>, <582 1>, <583 1>, <584 1>, <585 1>,
+			<586 1>, <587 1>, <588 1>, <589 1>, <590 1>,
+			<591 1>, <592 1>, <593 1>, <594 1>, <595 1>,
+			<596 1>, <597 1>, <598 1>, <599 1>, <600 1>,
+			<960 1>, <961 1>, <962 1>, <963 1>, <964 1>,
+			<965 1>, <966 1>, <967 1>, <968 1>, <969 1>,
+			<970 1>, <971 1>, <972 1>, <973 1>, <974 1>,
+			<975 1>, <976 1>, <977 1>, <978 1>, <979 1>,
+			<980 1>, <981 1>, <982 1>, <983 1>, <984 1>,
+			<985 1>, <986 1>, <987 1>, <988 1>, <989 1>,
+			<990 1>, <991 1>, <992 1>, <993 1>, <994 1>,
+			<995 1>, <996 1>, <997 1>, <998 1>, <999 1>,
+			<1000 1>, <1001 1>, <1002 1>, <1003 1>, <1004 1>,
+			<1005 1>, <1006 1>, <1007 1>, <1008 1>, <1009 1>,
+			<1010 1>, <1011 1>, <1012 1>, <1013 1>, <1014 1>,
+			<1015 1>, <1016 1>, <1017 1>, <1018 1>, <1019 1>,
+			<1020 1>, <1021 1>, <1022 1>, <1023 1>, <1024 1>,
+			<1025 1>, <1026 1>, <1027 1>, <1028 1>, <1029 1>,
+			<1030 1>, <1031 1>, <1032 1>, <1033 1>, <1034 1>,
+			<1035 1>, <1036 1>, <1037 1>, <1038 1>, <1039 1>,
+			<1040 1>, <1041 1>, <1042 1>, <1043 1>, <1044 1>,
+			<1045 1>, <1046 1>, <1047 1>, <1048 1>, <1049 1>,
+			<1050 1>, <1051 1>, <1052 1>, <1053 1>, <1054 1>,
+			<1055 1>, <1056 1>, <1057 1>, <1058 1>, <1059 1>,
+			<1060 1>, <1061 1>, <1062 1>, <1063 1>, <1064 1>,
+			<1065 1>, <1066 1>, <1067 1>, <1068 1>, <1069 1>,
+			<1070 1>, <1071 1>, <1072 1>, <1073 1>, <1074 1>,
+			<1075 1>, <1076 1>, <1077 1>, <1078 1>, <1079 1>,
+			<1080 1>, <1081 1>, <1082 1>, <1083 1>, <1084 1>,
+			<1085 1>, <1086 1>, <1087 1>, <1088 1>, <1089 1>,
+			<1090 1>, <1091 1>, <1092 1>, <1093 1>, <1094 1>,
+			<1095 1>, <1096 1>, <1097 1>, <1098 1>, <1099 1>,
+			<1100 1>, <1101 1>, <1102 1>, <1103 1>, <1104 1>,
+			<1105 1>, <1106 1>, <1107 1>, <1108 1>, <1109 1>,
+			<1110 1>, <1111 1>, <1112 1>, <1113 1>, <1114 1>,
+			<1115 1>, <1116 1>, <1117 1>, <1118 1>, <1119 1>,
+			<1120 1>, <1121 1>, <1122 1>, <1123 1>, <1124 1>,
+			<1125 1>, <1126 1>, <1127 1>, <1128 1>, <1129 1>,
+			<1130 1>, <1131 1>, <1132 1>, <1133 1>, <1134 1>,
+			<1135 1>, <1136 1>, <1137 1>, <1138 1>, <1139 1>,
+			<1140 1>, <1141 1>, <1142 1>, <1143 1>, <1144 1>,
+			<1145 1>, <1146 1>, <1147 1>, <1148 1>, <1149 1>,
+			<1150 1>, <1151 1>, <1152 1>, <1153 1>, <1154 1>,
+			<1155 1>, <1156 1>, <1157 1>, <1158 1>, <1159 1>,
+			<1160 1>, <1161 1>, <1162 1>, <1163 1>, <1164 1>,
+			<1165 1>, <1166 1>, <1167 1>, <1168 1>, <1169 1>,
+			<1170 1>, <1171 1>, <1172 1>, <1173 1>, <1174 1>,
+			<1175 1>, <1176 1>, <1177 1>, <1178 1>, <1179 1>,
+			<1180 1>, <1181 1>, <1182 1>, <1183 1>, <1184 1>,
+			<1185 1>, <1186 1>, <1187 1>, <1188 1>, <1189 1>,
+			<1190 1>, <1191 1>, <1192 1>, <1193 1>, <1194 1>,
+			<1195 1>, <1196 1>, <1197 1>, <1198 1>, <1199 1>,
+			<1200 1>, <1201 1>, <1202 1>, <1203 1>, <1204 1>,
+			<1205 1>, <1206 1>, <1207 1>, <1208 1>, <1209 1>,
+			<1210 1>, <1211 1>, <1212 1>, <1213 1>, <1214 1>,
+			<1215 1>, <1216 1>, <1217 1>, <1218 1>, <1219 1>,
+			<1220 1>, <1221 1>, <1222 1>, <1223 1>, <1224 1>,
+			<1225 1>, <1226 1>, <1227 1>, <1228 1>, <1229 1>,
+			<1230 1>, <1231 1>, <1232 1>, <1233 1>, <1234 1>,
+			<1235 1>, <1236 1>, <1237 1>, <1238 1>, <1239 1>,
+			<1240 1>, <1241 1>, <1242 1>, <1243 1>, <1244 1>,
+			<1245 1>, <1246 1>, <1247 1>, <1248 1>, <1249 1>,
+			<1250 1>, <1251 1>, <1252 1>, <1253 1>, <1254 1>,
+			<1255 1>, <1256 1>, <1257 1>, <1258 1>, <1259 1>,
+			<1260 1>, <1261 1>, <1262 1>, <1263 1>, <1264 1>,
+			<1265 1>, <1266 1>, <1267 1>, <1268 1>, <1269 1>,
+			<1270 1>, <1271 1>, <1272 1>, <1273 1>, <1274 1>,
+			<1275 1>, <1276 1>, <1277 1>, <1278 1>, <1279 1>,
+			<1280 1>, <1281 1>, <1282 1>, <1283 1>, <1284 1>,
+			<1285 1>, <1286 1>, <1287 1>, <1288 1>, <1289 1>,
+			<1290 1>, <1291 1>, <1292 1>, <1293 1>, <1294 1>,
+			<1295 1>, <1296 1>, <1297 1>, <1298 1>, <1299 1>,
+			<1300 1>, <1301 1>, <1302 1>, <1303 1>, <1304 1>,
+			<1305 1>, <1306 1>, <1307 1>, <1308 1>, <1309 1>,
+			<1310 1>, <1311 1>, <1312 1>, <1313 1>, <1314 1>,
+			<1315 1>, <1316 1>, <1317 1>, <1318 1>, <1319 1>,
+			<1320 1>, <1321 1>, <1322 1>, <1323 1>, <1324 1>,
+			<1325 1>, <1326 1>, <1327 1>, <1328 1>, <1329 1>,
+			<1330 1>, <1331 1>, <1332 1>, <1333 1>, <1334 1>,
+			<1335 1>, <1336 1>, <1337 1>, <1338 1>, <1339 1>,
+			<1340 1>, <1341 1>, <1342 1>, <1343 1>;
+
+			desc-num = <0x400>;
+			buf-size = <0x1000>;
+			dma-coherent;
+
+			port@0 {
+				reg = <0>;
+				serdes-syscon = <&serdes_ctrl>;
+				port-rst-offset = <0>;
+				port-mode-offset = <0>;
+				media-type = "fiber";
+			};
+
+			port@1 {
+				reg = <1>;
+				serdes-syscon= <&serdes_ctrl>;
+				port-rst-offset = <1>;
+				port-mode-offset = <1>;
+				media-type = "fiber";
+			};
+
+			port@4 {
+				reg = <4>;
+				phy-handle = <&phy0>;
+				serdes-syscon= <&serdes_ctrl>;
+				port-rst-offset = <4>;
+				port-mode-offset = <2>;
+				media-type = "copper";
+			};
+
+			port@5 {
+				reg = <5>;
+				phy-handle = <&phy1>;
+				serdes-syscon= <&serdes_ctrl>;
+				port-rst-offset = <5>;
+				port-mode-offset = <3>;
+				media-type = "copper";
+			};
+		};
+
+		eth0: ethernet@4{
+			compatible = "hisilicon,hns-nic-v2";
+			ae-handle = <&dsaf0>;
+			port-idx-in-ae = <4>;
+			local-mac-address = [00 00 00 00 00 00];
+			status = "disabled";
+			dma-coherent;
+		};
+
+		eth1: ethernet@5{
+			compatible = "hisilicon,hns-nic-v2";
+			ae-handle = <&dsaf0>;
+			port-idx-in-ae = <5>;
+			local-mac-address = [00 00 00 00 00 00];
+			status = "disabled";
+			dma-coherent;
+		};
+
+		eth2: ethernet@0{
+			compatible = "hisilicon,hns-nic-v2";
+			ae-handle = <&dsaf0>;
+			port-idx-in-ae = <0>;
+			local-mac-address = [00 00 00 00 00 00];
+			status = "disabled";
+			dma-coherent;
+		};
+
+		eth3: ethernet@1{
+			compatible = "hisilicon,hns-nic-v2";
+			ae-handle = <&dsaf0>;
+			port-idx-in-ae = <1>;
+			local-mac-address = [00 00 00 00 00 00];
+			status = "disabled";
+			dma-coherent;
+		};
+
+		sas0: sas@c3000000 {
+			compatible = "hisilicon,hip06-sas-v2";
+			reg = <0 0xc3000000 0 0x10000>;
+			sas-addr = [50 01 88 20 16 00 00 00];
+			hisilicon,sas-syscon = <&dsa_subctrl>;
+			ctrl-reset-reg = <0xa60>;
+			ctrl-reset-sts-reg = <0x5a30>;
+			ctrl-clock-ena-reg = <0x338>;
+			queue-count = <16>;
+			phy-count = <8>;
+			dma-coherent;
+			interrupt-parent = <&mbigen_sas0>;
+			interrupts = <64 4>,<65 4>,<66 4>,<67 4>,<68 4>,
+				     <69 4>,<70 4>,<71 4>,<72 4>,<73 4>,
+				     <75 4>,<76 4>,<77 4>,<78 4>,<79 4>,
+				     <80 4>,<81 4>,<82 4>,<83 4>,<84 4>,
+				     <85 4>,<86 4>,<87 4>,<88 4>,<89 4>,
+				     <90 4>,<91 4>,<92 4>,<93 4>,<94 4>,
+				     <95 4>,<96 4>,<97 4>,<98 4>,<99 4>,
+				     <100 4>,<101 4>,<102 4>,<103 4>,<104 4>,
+				     <105 4>,<106 4>,<107 4>,<108 4>,<109 4>,
+				     <110 4>,<111 4>,<112 4>,<113 4>,<114 4>,
+				     <115 4>,<116 4>,<117 4>,<118 4>,<119 4>,
+				     <120 4>,<121 4>,<122 4>,<123 4>,<124 4>,
+				     <125 4>,<126 4>,<127 4>,<128 4>,<129 4>,
+				     <130 4>,<131 4>,<132 4>,<133 4>,<134 4>,
+				     <135 4>,<136 4>,<137 4>,<138 4>,<139 4>,
+				     <140 4>,<141 4>,<142 4>,<143 4>,<144 4>,
+				     <145 4>,<146 4>,<147 4>,<148 4>,<149 4>,
+				     <150 4>,<151 4>,<152 4>,<153 4>,<154 4>,
+				     <155 4>,<156 4>,<157 4>,<158 4>,<159 4>,
+				     <160 4>,<601 1>,<602 1>,<603 1>,<604 1>,
+				     <605 1>,<606 1>,<607 1>,<608 1>,<609 1>,
+				     <610 1>,<611 1>,<612 1>,<613 1>,<614 1>,
+				     <615 1>,<616 1>,<617 1>,<618 1>,<619 1>,
+				     <620 1>,<621 1>,<622 1>,<623 1>,<624 1>,
+				     <625 1>,<626 1>,<627 1>,<628 1>,<629 1>,
+				     <630 1>,<631 1>,<632 1>;
+			status = "disabled";
+		};
+
+		sas1: sas@a2000000 {
+			compatible = "hisilicon,hip06-sas-v2";
+			reg = <0 0xa2000000 0 0x10000>;
+			sas-addr = [50 01 88 20 16 00 00 00];
+			hisilicon,sas-syscon = <&pcie_subctl>;
+			am-max-trans;
+			ctrl-reset-reg = <0xa18>;
+			ctrl-reset-sts-reg = <0x5a0c>;
+			ctrl-clock-ena-reg = <0x318>;
+			queue-count = <16>;
+			phy-count = <8>;
+			dma-coherent;
+			interrupt-parent = <&mbigen_sas1>;
+			interrupts = <64 4>,<65 4>,<66 4>,<67 4>,<68 4>,
+				     <69 4>,<70 4>,<71 4>,<72 4>,<73 4>,
+				     <74 4>,<75 4>,<76 4>,<77 4>,<78 4>,
+				     <79 4>,<80 4>,<81 4>,<82 4>,<83 4>,
+				     <84 4>,<85 4>,<86 4>,<87 4>,<88 4>,
+				     <89 4>,<90 4>,<91 4>,<92 4>,<93 4>,
+				     <94 4>,<95 4>,<96 4>,<97 4>,<98 4>,
+				     <99 4>,<100 4>,<101 4>,<102 4>,<103 4>,
+				     <104 4>,<105 4>,<106 4>,<107 4>,<108 4>,
+				     <109 4>,<110 4>,<111 4>,<112 4>,<113 4>,
+				     <114 4>,<115 4>,<116 4>,<117 4>,<118 4>,
+				     <119 4>,<120 4>,<121 4>,<122 4>,<123 4>,
+				     <124 4>,<125 4>,<126 4>,<127 4>,<128 4>,
+				     <129 4>,<130 4>,<131 4>,<132 4>,<133 4>,
+				     <134 4>,<135 4>,<136 4>,<137 4>,<138 4>,
+				     <139 4>,<140 4>,<141 4>,<142 4>,<143 4>,
+				     <144 4>,<145 4>,<146 4>,<147 4>,<148 4>,
+				     <149 4>,<150 4>,<151 4>,<152 4>,<153 4>,
+				     <154 4>,<155 4>,<156 4>,<157 4>,<158 4>,
+				     <159 4>,<576 1>,<577 1>,<578 1>,<579 1>,
+				     <580 1>,<581 1>,<582 1>,<583 1>,<584 1>,
+				     <585 1>,<586 1>,<587 1>,<588 1>,<589 1>,
+				     <590 1>,<591 1>,<592 1>,<593 1>,<594 1>,
+				     <595 1>,<596 1>,<597 1>,<598 1>,<599 1>,
+				     <600 1>,<601 1>,<602 1>,<603 1>,<604 1>,
+				     <605 1>,<606 1>,<607 1>;
+			status = "disabled";
+		};
+
+		sas2: sas@a3000000 {
+			compatible = "hisilicon,hip06-sas-v2";
+			reg = <0 0xa3000000 0 0x10000>;
+			sas-addr = [50 01 88 20 16 00 00 00];
+			hisilicon,sas-syscon = <&pcie_subctl>;
+			ctrl-reset-reg = <0xae0>;
+			ctrl-reset-sts-reg = <0x5a70>;
+			ctrl-clock-ena-reg = <0x3a8>;
+			queue-count = <16>;
+			phy-count = <9>;
+			dma-coherent;
+			interrupt-parent = <&mbigen_sas2>;
+			interrupts = <192 4>,<193 4>,<194 4>,<195 4>,<196 4>,
+				     <197 4>,<198 4>,<199 4>,<200 4>,<201 4>,
+				     <202 4>,<203 4>,<204 4>,<205 4>,<206 4>,
+				     <207 4>,<208 4>,<209 4>,<210 4>,<211 4>,
+				     <212 4>,<213 4>,<214 4>,<215 4>,<216 4>,
+				     <217 4>,<218 4>,<219 4>,<220 4>,<221 4>,
+				     <222 4>,<223 4>,<224 4>,<225 4>,<226 4>,
+				     <227 4>,<228 4>,<229 4>,<230 4>,<231 4>,
+				     <232 4>,<233 4>,<234 4>,<235 4>,<236 4>,
+				     <237 4>,<238 4>,<239 4>,<240 4>,<241 4>,
+				     <242 4>,<243 4>,<244 4>,<245 4>,<246 4>,
+				     <247 4>,<248 4>,<249 4>,<250 4>,<251 4>,
+				     <252 4>,<253 4>,<254 4>,<255 4>,<256 4>,
+				     <257 4>,<258 4>,<259 4>,<260 4>,<261 4>,
+				     <262 4>,<263 4>,<264 4>,<265 4>,<266 4>,
+				     <267 4>,<268 4>,<269 4>,<270 4>,<271 4>,
+				     <272 4>,<273 4>,<274 4>,<275 4>,<276 4>,
+				     <277 4>,<278 4>,<279 4>,<280 4>,<281 4>,
+				     <282 4>,<283 4>,<284 4>,<285 4>,<286 4>,
+				     <287 4>,<608 1>,<609 1>,<610 1>,<611 1>,
+				     <612 1>,<613 1>,<614 1>,<615 1>,<616 1>,
+				     <617 1>,<618 1>,<619 1>,<620 1>,<621 1>,
+				     <622 1>,<623 1>,<624 1>,<625 1>,<626 1>,
+				     <627 1>,<628 1>,<629 1>,<630 1>,<631 1>,
+				     <632 1>,<633 1>,<634 1>,<635 1>,<636 1>,
+				     <637 1>,<638 1>,<639 1>;
+			status = "disabled";
+		};
 	};
 
 };
diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile
index 308468d..cf39531 100644
--- a/arch/arm64/boot/dts/marvell/Makefile
+++ b/arch/arm64/boot/dts/marvell/Makefile
@@ -5,6 +5,7 @@
 # Mvebu SoC Family
 dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-db.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-7040-db.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-db.dtb
 
 always		:= $(dtb-y)
 subdir-y	:= $(dts-dirs)
diff --git a/arch/arm64/boot/dts/marvell/armada-8020.dtsi b/arch/arm64/boot/dts/marvell/armada-8020.dtsi
index 3753c1c..048e5cf 100644
--- a/arch/arm64/boot/dts/marvell/armada-8020.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-8020.dtsi
@@ -47,6 +47,7 @@
 
 #include "armada-ap806-dual.dtsi"
 #include "armada-cp110-master.dtsi"
+#include "armada-cp110-slave.dtsi"
 
 / {
 	model = "Marvell Armada 8020";
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-db.dts b/arch/arm64/boot/dts/marvell/armada-8040-db.dts
new file mode 100644
index 0000000..6e6f182
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-8040-db.dts
@@ -0,0 +1,150 @@
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * Device Tree file for Marvell Armada 8040 Development board platform
+ */
+
+#include "armada-8040.dtsi"
+
+/ {
+	model = "Marvell Armada 8040 DB board";
+	compatible = "marvell,armada8040-db", "marvell,armada8040",
+		     "marvell,armada-ap806-quad", "marvell,armada-ap806";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@00000000 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&spi0 {
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0 0x200000>;
+			};
+			partition@400000 {
+				label = "Filesystem";
+				reg = <0x200000 0xce0000>;
+			};
+		};
+	};
+};
+
+/* Accessible over the mini-USB CON9 connector on the main board */
+&uart0 {
+	status = "okay";
+};
+
+
+/* CON5 on CP0 expansion */
+&cpm_pcie2 {
+	status = "okay";
+};
+
+&cpm_i2c0 {
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+/* CON4 on CP0 expansion */
+&cpm_sata0 {
+	status = "okay";
+};
+
+/* CON9 on CP0 expansion */
+&cpm_usb3_0 {
+	status = "okay";
+};
+
+/* CON10 on CP0 expansion */
+&cpm_usb3_1 {
+	status = "okay";
+};
+
+/* CON5 on CP1 expansion */
+&cps_pcie2 {
+	status = "okay";
+};
+
+&cps_i2c0 {
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+/* CON4 on CP1 expansion */
+&cps_sata0 {
+	status = "okay";
+};
+
+/* CON9 on CP1 expansion */
+&cps_usb3_0 {
+	status = "okay";
+};
+
+/* CON10 on CP1 expansion */
+&cps_usb3_1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-8040.dtsi b/arch/arm64/boot/dts/marvell/armada-8040.dtsi
index 8bd0d8f..9c1b28c 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-8040.dtsi
@@ -47,6 +47,7 @@
 
 #include "armada-ap806-quad.dtsi"
 #include "armada-cp110-master.dtsi"
+#include "armada-cp110-slave.dtsi"
 
 / {
 	model = "Marvell Armada 8040";
diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
index c2a6745..7b61361 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
@@ -128,6 +128,12 @@
 					     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
 			};
 
+			pmu {
+				compatible = "arm,cortex-a72-pmu";
+				interrupt-parent = <&pic>;
+				interrupts = <17>;
+			};
+
 			odmi: odmi@300000 {
 				compatible = "marvell,odmi-controller";
 				interrupt-controller;
@@ -140,6 +146,14 @@
 				marvell,spi-base = <128>, <136>, <144>, <152>;
 			};
 
+			pic: interrupt-controller@3f0100 {
+				compatible = "marvell,armada-8k-pic";
+				reg = <0x3f0100 0x10>;
+				#interrupt-cells = <1>;
+				interrupt-controller;
+				interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
 			xor@400000 {
 				compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
 				reg = <0x400000 0x1000>,
diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
index da31bbb..e5e3ed6 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
@@ -176,6 +176,7 @@
 			#interrupt-cells = <1>;
 			device_type = "pci";
 			dma-coherent;
+			msi-parent = <&gic_v2m0>;
 
 			bus-range = <0 0xff>;
 			ranges =
@@ -201,6 +202,7 @@
 			#interrupt-cells = <1>;
 			device_type = "pci";
 			dma-coherent;
+			msi-parent = <&gic_v2m0>;
 
 			bus-range = <0 0xff>;
 			ranges =
@@ -227,6 +229,7 @@
 			#interrupt-cells = <1>;
 			device_type = "pci";
 			dma-coherent;
+			msi-parent = <&gic_v2m0>;
 
 			bus-range = <0 0xff>;
 			ranges =
diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
new file mode 100644
index 0000000..842fb33
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
@@ -0,0 +1,249 @@
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * Device Tree file for Marvell Armada CP110 Slave.
+ */
+
+/ {
+	cp110-slave {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		ranges;
+
+		config-space {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			interrupt-parent = <&gic>;
+			ranges = <0x0 0x0 0xf4000000 0x2000000>;
+
+			cps_syscon0: system-controller@440000 {
+				compatible = "marvell,cp110-system-controller0",
+					     "syscon";
+				reg = <0x440000 0x1000>;
+				#clock-cells = <2>;
+				core-clock-output-names =
+					"cps-apll", "cps-ppv2-core", "cps-eip",
+					"cps-core", "cps-nand-core";
+				gate-clock-output-names =
+					"cps-audio", "cps-communit", "cps-nand",
+					"cps-ppv2", "cps-sdio", "cps-mg-domain",
+					"cps-mg-core", "cps-xor1", "cps-xor0",
+					"cps-gop-dp", "none", "cps-pcie_x10",
+					"cps-pcie_x11", "cps-pcie_x4", "cps-pcie-xor",
+					"cps-sata", "cps-sata-usb", "cps-main",
+					"cps-sd-mmc", "none", "none",
+					"cps-slow-io", "cps-usb3h0", "cps-usb3h1",
+					"cps-usb3dev", "cps-eip150", "cps-eip197";
+			};
+
+			cps_sata0: sata@540000 {
+				compatible = "marvell,armada-8k-ahci";
+				reg = <0x540000 0x30000>;
+				interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&cps_syscon0 1 15>;
+				status = "disabled";
+			};
+
+			cps_usb3_0: usb3@500000 {
+				compatible = "marvell,armada-8k-xhci",
+					     "generic-xhci";
+				reg = <0x500000 0x4000>;
+				dma-coherent;
+				interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&cps_syscon0 1 22>;
+				status = "disabled";
+			};
+
+			cps_usb3_1: usb3@510000 {
+				compatible = "marvell,armada-8k-xhci",
+					     "generic-xhci";
+				reg = <0x510000 0x4000>;
+				dma-coherent;
+				interrupts = <GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&cps_syscon0 1 23>;
+				status = "disabled";
+			};
+
+			cps_xor0: xor@6a0000 {
+				compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
+				reg = <0x6a0000 0x1000>,
+				      <0x6b0000 0x1000>;
+				dma-coherent;
+				msi-parent = <&gic_v2m0>;
+				clocks = <&cps_syscon0 1 8>;
+			};
+
+			cps_xor1: xor@6c0000 {
+				compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
+				reg = <0x6c0000 0x1000>,
+				      <0x6d0000 0x1000>;
+				dma-coherent;
+				msi-parent = <&gic_v2m0>;
+				clocks = <&cps_syscon0 1 7>;
+			};
+
+			cps_spi0: spi@700600 {
+				compatible = "marvell,armada-380-spi";
+				reg = <0x700600 0x50>;
+				#address-cells = <0x1>;
+				#size-cells = <0x0>;
+				cell-index = <1>;
+				clocks = <&cps_syscon0 0 3>;
+				status = "disabled";
+			};
+
+			cps_spi1: spi@700680 {
+				compatible = "marvell,armada-380-spi";
+				reg = <0x700680 0x50>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <2>;
+				clocks = <&cps_syscon0 1 21>;
+				status = "disabled";
+			};
+
+			cps_i2c0: i2c@701000 {
+				compatible = "marvell,mv78230-i2c";
+				reg = <0x701000 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&cps_syscon0 1 21>;
+				status = "disabled";
+			};
+
+			cps_i2c1: i2c@701100 {
+				compatible = "marvell,mv78230-i2c";
+				reg = <0x701100 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&cps_syscon0 1 21>;
+				status = "disabled";
+			};
+		};
+
+		cps_pcie0: pcie@f4600000 {
+			compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
+			reg = <0 0xf4600000 0 0x10000>,
+			      <0 0xfaf00000 0 0x80000>;
+			reg-names = "ctrl", "config";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			device_type = "pci";
+			dma-coherent;
+			msi-parent = <&gic_v2m0>;
+
+			bus-range = <0 0xff>;
+			ranges =
+				/* downstream I/O */
+				<0x81000000 0 0xfd000000 0  0xfd000000 0 0x10000
+				/* non-prefetchable memory */
+				0x82000000 0 0xfa000000 0  0xfa000000 0 0xf00000>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
+			num-lanes = <1>;
+			clocks = <&cps_syscon0 1 13>;
+			status = "disabled";
+		};
+
+		cps_pcie1: pcie@f4620000 {
+			compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
+			reg = <0 0xf4620000 0 0x10000>,
+			      <0 0xfbf00000 0 0x80000>;
+			reg-names = "ctrl", "config";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			device_type = "pci";
+			dma-coherent;
+			msi-parent = <&gic_v2m0>;
+
+			bus-range = <0 0xff>;
+			ranges =
+				/* downstream I/O */
+				<0x81000000 0 0xfd010000 0  0xfd010000 0 0x10000
+				/* non-prefetchable memory */
+				0x82000000 0 0xfb000000 0  0xfb000000 0 0xf00000>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>;
+
+			num-lanes = <1>;
+			clocks = <&cps_syscon0 1 11>;
+			status = "disabled";
+		};
+
+		cps_pcie2: pcie@f4640000 {
+			compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
+			reg = <0 0xf4640000 0 0x10000>,
+			      <0 0xfcf00000 0 0x80000>;
+			reg-names = "ctrl", "config";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			device_type = "pci";
+			dma-coherent;
+			msi-parent = <&gic_v2m0>;
+
+			bus-range = <0 0xff>;
+			ranges =
+				/* downstream I/O */
+				<0x81000000 0 0xfd020000 0  0xfd020000 0 0x10000
+				/* non-prefetchable memory */
+				0x82000000 0 0xfc000000 0  0xfc000000 0 0xf00000>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>;
+
+			num-lanes = <1>;
+			clocks = <&cps_syscon0 1 12>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/marvell/berlin4ct.dtsi b/arch/arm64/boot/dts/marvell/berlin4ct.dtsi
index 099ad93..85c23fa 100644
--- a/arch/arm64/boot/dts/marvell/berlin4ct.dtsi
+++ b/arch/arm64/boot/dts/marvell/berlin4ct.dtsi
@@ -68,6 +68,7 @@
 			device_type = "cpu";
 			reg = <0x0>;
 			enable-method = "psci";
+			next-level-cache = <&l2>;
 			cpu-idle-states = <&CPU_SLEEP_0>;
 		};
 
@@ -76,6 +77,7 @@
 			device_type = "cpu";
 			reg = <0x1>;
 			enable-method = "psci";
+			next-level-cache = <&l2>;
 			cpu-idle-states = <&CPU_SLEEP_0>;
 		};
 
@@ -84,6 +86,7 @@
 			device_type = "cpu";
 			reg = <0x2>;
 			enable-method = "psci";
+			next-level-cache = <&l2>;
 			cpu-idle-states = <&CPU_SLEEP_0>;
 		};
 
@@ -92,9 +95,14 @@
 			device_type = "cpu";
 			reg = <0x3>;
 			enable-method = "psci";
+			next-level-cache = <&l2>;
 			cpu-idle-states = <&CPU_SLEEP_0>;
 		};
 
+		l2: cache {
+			compatible = "cache";
+		};
+
 		idle-states {
 			entry-method = "psci";
 			CPU_SLEEP_0: cpu-sleep-0 {
@@ -115,7 +123,7 @@
 	};
 
 	pmu {
-		compatible = "arm,armv8-pmuv3";
+		compatible = "arm,cortex-a53-pmu", "arm,armv8-pmuv3";
 		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
@@ -279,7 +287,6 @@
 				reg = <0x4000 0x100>;
 				clocks = <&osc>;
 				interrupts = <1>;
-				status = "disabled";
 			};
 
 			wdt2: watchdog@5000 {
@@ -287,7 +294,6 @@
 				reg = <0x5000 0x100>;
 				clocks = <&osc>;
 				interrupts = <2>;
-				status = "disabled";
 			};
 
 			sm_gpio0: gpio@8000 {
diff --git a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
index 7453a47..2a7f731 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
@@ -42,6 +42,44 @@
 		gpio = <&pio 130 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
+
+	connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "d";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi0_out>;
+			};
+		};
+	};
+};
+
+&cec {
+	status = "okay";
+};
+
+&dpi0 {
+	status = "okay";
+};
+
+&hdmi_phy {
+	status = "okay";
+};
+
+&hdmi0 {
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+
+			hdmi0_out: endpoint {
+				remote-endpoint = <&hdmi_connector_in>;
+			};
+		};
+	};
 };
 
 &i2c1 {
diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index 10f638f..1c71e25 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -254,6 +254,16 @@
 				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
 
+			hdmi_pin: xxx {
+
+				/*hdmi htplg pin*/
+				pins1 {
+					pinmux = <MT8173_PIN_21_HTPLG__FUNC_HTPLG>;
+					input-enable;
+					bias-pull-down;
+				};
+			};
+
 			i2c0_pins_a: i2c0 {
 				pins1 {
 					pinmux = <MT8173_PIN_45_SDA0__FUNC_SDA0>,
@@ -341,6 +351,14 @@
 			clock-names = "spi", "wrap";
 		};
 
+		cec: cec@10013000 {
+			compatible = "mediatek,mt8173-cec";
+			reg = <0 0x10013000 0 0xbc>;
+			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&infracfg CLK_INFRA_CEC>;
+			status = "disabled";
+		};
+
 		vpu: vpu@10020000 {
 			compatible = "mediatek,mt8173-vpu";
 			reg = <0 0x10020000 0 0x30000>,
@@ -383,6 +401,19 @@
 			#clock-cells = <1>;
 		};
 
+		hdmi_phy: hdmi-phy@10209100 {
+			compatible = "mediatek,mt8173-hdmi-phy";
+			reg = <0 0x10209100 0 0x24>;
+			clocks = <&apmixedsys CLK_APMIXED_HDMI_REF>;
+			clock-names = "pll_ref";
+			clock-output-names = "hdmitx_dig_cts";
+			mediatek,ibias = <0xa>;
+			mediatek,ibias_up = <0x1c>;
+			#clock-cells = <0>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
 		mipi_tx0: mipi-dphy@10215000 {
 			compatible = "mediatek,mt8173-mipi-tx";
 			reg = <0 0x10215000 0 0x1000>;
@@ -577,6 +608,14 @@
 			status = "disabled";
 		};
 
+		hdmiddc0: i2c@11012000 {
+			compatible = "mediatek,mt8173-hdmi-ddc";
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_LOW>;
+			reg = <0 0x11012000 0 0x1C>;
+			clocks = <&pericfg CLK_PERI_I2C5>;
+			clock-names = "ddc-i2c";
+		};
+
 		i2c6: i2c@11013000 {
 			compatible = "mediatek,mt8173-i2c";
 			reg = <0 0x11013000 0 0x70>,
@@ -885,6 +924,12 @@
 				 <&apmixedsys CLK_APMIXED_TVDPLL>;
 			clock-names = "pixel", "engine", "pll";
 			status = "disabled";
+
+			port {
+				dpi0_out: endpoint {
+					remote-endpoint = <&hdmi0_in>;
+				};
+			};
 		};
 
 		pwm0: pwm@1401e000 {
@@ -942,6 +987,38 @@
 			clocks = <&mmsys CLK_MM_DISP_OD>;
 		};
 
+		hdmi0: hdmi@14025000 {
+			compatible = "mediatek,mt8173-hdmi";
+			reg = <0 0x14025000 0 0x400>;
+			interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&mmsys CLK_MM_HDMI_PIXEL>,
+				 <&mmsys CLK_MM_HDMI_PLLCK>,
+				 <&mmsys CLK_MM_HDMI_AUDIO>,
+				 <&mmsys CLK_MM_HDMI_SPDIF>;
+			clock-names = "pixel", "pll", "bclk", "spdif";
+			pinctrl-names = "default";
+			pinctrl-0 = <&hdmi_pin>;
+			phys = <&hdmi_phy>;
+			phy-names = "hdmi";
+			mediatek,syscon-hdmi = <&mmsys 0x900>;
+			assigned-clocks = <&topckgen CLK_TOP_HDMI_SEL>;
+			assigned-clock-parents = <&hdmi_phy>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					hdmi0_in: endpoint {
+						remote-endpoint = <&dpi0_out>;
+					};
+				};
+			};
+		};
+
 		larb4: larb@14027000 {
 			compatible = "mediatek,mt8173-smi-larb";
 			reg = <0 0x14027000 0 0x1000>;
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts
index 431266a..c2becb6 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts
@@ -27,6 +27,12 @@
 		reg = <0x0 0x80000000 0x0 0xc0000000>;
 	};
 
+	host1x@50000000 {
+		dpaux: dpaux@545c0000 {
+			status = "okay";
+		};
+	};
+
 	pinmux: pinmux@700008d4 {
 		pinctrl-names = "boot";
 		pinctrl-0 = <&state_boot>;
@@ -1556,6 +1562,46 @@
 		};
 	};
 
+	i2c@7000d100 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		nau8825@1a {
+			compatible = "nuvoton,nau8825";
+			reg = <0x1a>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(E, 6) IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&tegra_car TEGRA210_CLK_CLK_OUT_2>;
+			clock-names = "mclk";
+
+			nuvoton,jkdet-enable;
+			nuvoton,jkdet-polarity = <GPIO_ACTIVE_LOW>;
+			nuvoton,vref-impedance = <2>;
+			nuvoton,micbias-voltage = <6>;
+			nuvoton,sar-threshold-num = <4>;
+			nuvoton,sar-threshold = <0xc 0x1e 0x38 0x60>;
+			nuvoton,sar-hysteresis = <1>;
+			nuvoton,sar-voltage = <0>;
+			nuvoton,sar-compare-time = <0>;
+			nuvoton,sar-sampling-time = <0>;
+			nuvoton,short-key-debounce = <2>;
+			nuvoton,jack-insert-debounce = <7>;
+			nuvoton,jack-eject-debounce = <7>;
+			status = "okay";
+		};
+
+		audio-codec@2d {
+			compatible = "realtek,rt5677";
+			reg = <0x2d>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(X, 0) IRQ_TYPE_LEVEL_HIGH>;
+			realtek,reset-gpio = <&gpio TEGRA_GPIO(BB, 3) GPIO_ACTIVE_LOW>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "okay";
+		};
+	};
+
 	pmc@7000e400 {
 		nvidia,invert-interrupt;
 		nvidia,suspend-mode = <0>;
@@ -1568,12 +1614,81 @@
 		status = "okay";
 	};
 
+	usb@70090000 {
+		phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>,
+		       <&{/padctl@7009f000/pads/pcie/lanes/pcie-6}>;
+		phy-names = "usb2-0", "usb3-0";
+
+		dvddio-pex-supply = <&avddio_1v05>;
+		hvddio-pex-supply = <&pp1800>;
+		avdd-usb-supply = <&pp3300>;
+		avdd-pll-utmip-supply = <&pp1800>;
+		avdd-pll-uerefe-supply = <&pp1050_avdd>;
+		dvdd-pex-pll-supply = <&avddio_1v05>;
+		hvdd-pex-pll-e-supply = <&pp1800>;
+
+		status = "okay";
+	};
+
+	padctl@7009f000 {
+		status = "okay";
+
+		pads {
+			usb2 {
+				status = "okay";
+
+				lanes {
+					usb2-0 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+				};
+			};
+
+			pcie {
+				status = "okay";
+
+				lanes {
+					pcie-6 {
+						nvidia,function = "usb3-ss";
+						status = "okay";
+					};
+				};
+			};
+		};
+
+		ports {
+			usb2-0 {
+				status = "okay";
+				vbus-supply = <&usbc_vbus>;
+				mode = "otg";
+			};
+
+			usb3-0 {
+				nvidia,usb2-companion = <0>;
+				status = "okay";
+			};
+		};
+	};
+
 	sdhci@700b0600 {
 		bus-width = <8>;
 		non-removable;
 		status = "okay";
 	};
 
+	aconnect@702c0000 {
+		status = "okay";
+
+		dma@702e2000 {
+			status = "okay";
+		};
+
+		agic@702f9000 {
+			status = "okay";
+		};
+	};
+
 	clocks {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -1646,6 +1761,11 @@
 		};
 	};
 
+	max98357a {
+		compatible = "maxim,max98357a";
+		status = "okay";
+	};
+
 	psci {
 		compatible = "arm,psci-1.0";
 		method = "smc";
diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
index c4cfdcf..f673979 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
@@ -34,6 +34,7 @@
 			clock-names = "dpaux", "parent";
 			resets = <&tegra_car 207>;
 			reset-names = "dpaux";
+			power-domains = <&pd_sor>;
 			status = "disabled";
 
 			state_dpaux1_aux: pinmux-aux {
@@ -108,6 +109,7 @@
 			clock-names = "dsi", "lp", "parent";
 			resets = <&tegra_car 48>;
 			reset-names = "dsi";
+			power-domains = <&pd_sor>;
 			nvidia,mipi-calibrate = <&mipi 0x0c0>; /* DSIA & DSIB pads */
 
 			status = "disabled";
@@ -137,6 +139,7 @@
 			clock-names = "dsi", "lp", "parent";
 			resets = <&tegra_car 82>;
 			reset-names = "dsi";
+			power-domains = <&pd_sor>;
 			nvidia,mipi-calibrate = <&mipi 0x300>; /* DSIC & DSID pads */
 
 			status = "disabled";
@@ -178,6 +181,7 @@
 			pinctrl-1 = <&state_dpaux_i2c>;
 			pinctrl-2 = <&state_dpaux_off>;
 			pinctrl-names = "aux", "i2c", "off";
+			power-domains = <&pd_sor>;
 			status = "disabled";
 		};
 
@@ -197,6 +201,7 @@
 			pinctrl-1 = <&state_dpaux1_i2c>;
 			pinctrl-2 = <&state_dpaux1_off>;
 			pinctrl-names = "aux", "i2c", "off";
+			power-domains = <&pd_sor>;
 			status = "disabled";
 		};
 
@@ -209,6 +214,7 @@
 			clock-names = "dpaux", "parent";
 			resets = <&tegra_car 181>;
 			reset-names = "dpaux";
+			power-domains = <&pd_sor>;
 			status = "disabled";
 
 			state_dpaux_aux: pinmux-aux {
@@ -325,7 +331,7 @@
 	};
 
 	gpio: gpio@6000d000 {
-		compatible = "nvidia,tegra210-gpio", "nvidia,tegra124-gpio", "nvidia,tegra30-gpio";
+		compatible = "nvidia,tegra210-gpio", "nvidia,tegra30-gpio";
 		reg = <0x0 0x6000d000 0x0 0x1000>;
 		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
@@ -648,27 +654,41 @@
 				#power-domain-cells = <0>;
 			};
 
+			pd_sor: sor {
+				clocks = <&tegra_car TEGRA210_CLK_SOR0>,
+					 <&tegra_car TEGRA210_CLK_SOR1>,
+					 <&tegra_car TEGRA210_CLK_CSI>,
+					 <&tegra_car TEGRA210_CLK_DSIA>,
+					 <&tegra_car TEGRA210_CLK_DSIB>,
+					 <&tegra_car TEGRA210_CLK_DPAUX>,
+					 <&tegra_car TEGRA210_CLK_DPAUX1>,
+					 <&tegra_car TEGRA210_CLK_MIPI_CAL>;
+				resets = <&tegra_car TEGRA210_CLK_SOR0>,
+					 <&tegra_car TEGRA210_CLK_SOR1>,
+					 <&tegra_car TEGRA210_CLK_CSI>,
+					 <&tegra_car TEGRA210_CLK_DSIA>,
+					 <&tegra_car TEGRA210_CLK_DSIB>,
+					 <&tegra_car TEGRA210_CLK_DPAUX>,
+					 <&tegra_car TEGRA210_CLK_DPAUX1>,
+					 <&tegra_car TEGRA210_CLK_MIPI_CAL>;
+				#power-domain-cells = <0>;
+			};
+
 			pd_xusbss: xusba {
 				clocks = <&tegra_car TEGRA210_CLK_XUSB_SS>;
-				clock-names = "xusb-ss";
 				resets = <&tegra_car TEGRA210_CLK_XUSB_SS>;
-				reset-names = "xusb-ss";
 				#power-domain-cells = <0>;
 			};
 
 			pd_xusbdev: xusbb {
 				clocks = <&tegra_car TEGRA210_CLK_XUSB_DEV>;
-				clock-names = "xusb-dev";
 				resets = <&tegra_car 95>;
-				reset-names = "xusb-dev";
 				#power-domain-cells = <0>;
 			};
 
 			pd_xusbhost: xusbc {
 				clocks = <&tegra_car TEGRA210_CLK_XUSB_HOST>;
-				clock-names = "xusb-host";
 				resets = <&tegra_car TEGRA210_CLK_XUSB_HOST>;
-				reset-names = "xusb-host";
 				#power-domain-cells = <0>;
 			};
 		};
@@ -948,6 +968,7 @@
 		reg = <0x0 0x700e3000 0x0 0x100>;
 		clocks = <&tegra_car TEGRA210_CLK_MIPI_CAL>;
 		clock-names = "mipi-cal";
+		power-domains = <&pd_sor>;
 		#nvidia,mipi-calibrate-cells = <1>;
 	};
 
@@ -961,6 +982,50 @@
 		#size-cells = <1>;
 		ranges = <0x702c0000 0x0 0x702c0000 0x00040000>;
 		status = "disabled";
+
+		adma: dma@702e2000 {
+			compatible = "nvidia,tegra210-adma";
+			reg = <0x702e2000 0x2000>;
+			interrupt-parent = <&agic>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			clocks = <&tegra_car TEGRA210_CLK_D_AUDIO>;
+			clock-names = "d_audio";
+			status = "disabled";
+		};
+
+		agic: agic@702f9000 {
+			compatible = "nvidia,tegra210-agic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x702f9000 0x2000>,
+			      <0x702fa000 0x2000>;
+			interrupts = <GIC_SPI 102 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&tegra_car TEGRA210_CLK_APE>;
+			clock-names = "clk";
+			status = "disabled";
+		};
 	};
 
 	spi@70410000 {
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index fa1f661..5dd05de 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -1,5 +1,6 @@
 dtb-$(CONFIG_ARCH_QCOM)	+= apq8016-sbc.dtb msm8916-mtp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8996-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= apq8096-db820c.dtb
 
 always		:= $(dtb-y)
 subdir-y	:= $(dts-dirs)
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi
index ee828a8..e1e6c6b 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi
@@ -24,4 +24,52 @@
 			bias-pull-up;
 		};
 	};
+
+	adv7533_int_active: adv533_int_active {
+		pinmux {
+			function = "gpio";
+			pins = "gpio31";
+		};
+		pinconf {
+			pins = "gpio31";
+			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+
+	adv7533_int_suspend: adv7533_int_suspend {
+		pinmux {
+			function = "gpio";
+			pins = "gpio31";
+		};
+		pinconf {
+			pins = "gpio31";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	adv7533_switch_active: adv7533_switch_active {
+		pinmux {
+			function = "gpio";
+			pins = "gpio32";
+		};
+		pinconf {
+			pins = "gpio32";
+			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+
+	adv7533_switch_suspend: adv7533_switch_suspend {
+		pinmux {
+			function = "gpio";
+			pins = "gpio32";
+		};
+		pinconf {
+			pins = "gpio32";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
 };
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
index 18639bc..bb062b5 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
@@ -63,6 +63,47 @@
 		/* On High speed expansion */
 			label = "HS-I2C2";
 			status = "okay";
+
+			adv_bridge: bridge@39 {
+				status = "okay";
+
+				compatible = "adi,adv7533";
+				reg = <0x39>;
+
+				interrupt-parent = <&msmgpio>;
+				interrupts = <31 2>;
+
+				adi,dsi-lanes = <4>;
+
+				pd-gpios = <&msmgpio 32 0>;
+
+				avdd-supply = <&pm8916_l6>;
+				v1p2-supply = <&pm8916_l6>;
+				v3p3-supply = <&pm8916_l17>;
+
+				pinctrl-names = "default","sleep";
+				pinctrl-0 = <&adv7533_int_active &adv7533_switch_active>;
+				pinctrl-1 = <&adv7533_int_suspend &adv7533_switch_suspend>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						adv7533_in: endpoint {
+							remote-endpoint = <&dsi0_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						adv7533_out: endpoint {
+							remote-endpoint = <&hdmi_con>;
+						};
+					};
+				};
+			};
 		};
 
 		i2c@78ba000 {
@@ -180,6 +221,36 @@
 		lpass@07708000 {
 			status = "okay";
 		};
+
+		mdss@1a00000 {
+			status = "okay";
+
+			mdp@1a01000 {
+				status = "okay";
+			};
+
+			dsi@1a98000 {
+				status = "okay";
+
+				vdda-supply = <&pm8916_l2>;
+				vddio-supply = <&pm8916_l6>;
+
+				ports {
+					port@1 {
+						endpoint {
+							remote-endpoint = <&adv7533_in>;
+							data-lanes = <0 1 2 3>;
+						};
+					};
+				};
+			};
+
+			dsi-phy@1a98300 {
+				status = "okay";
+
+				vddio-supply = <&pm8916_l6>;
+			};
+		};
 	};
 
 	usb2513 {
@@ -194,6 +265,17 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&usb_id_default>;
 	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&adv7533_out>;
+			};
+		};
+	};
 };
 
 &smd_rpm_regulators {
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c-pins.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c-pins.dtsi
new file mode 100644
index 0000000..24552f1
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c-pins.dtsi
@@ -0,0 +1,39 @@
+/*
+ * Copyright (c) 2013-2016, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+&msmgpio {
+	sdc2_cd_on: sdc2_cd_on {
+		mux {
+			pins = "gpio38";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio38";
+			bias-pull-up;		/* pull up */
+			drive-strength = <16>;	/* 16 MA */
+		};
+	};
+
+	sdc2_cd_off: sdc2_cd_off {
+		mux {
+			pins = "gpio38";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio38";
+			bias-pull-up;		/* pull up */
+			drive-strength = <2>;	/* 2 MA */
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
new file mode 100644
index 0000000..230e9c8
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
@@ -0,0 +1,21 @@
+/*
+ * Copyright (c) 2014-2016, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+
+#include "apq8096-db820c.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. DB820c";
+	compatible = "arrow,apq8096-db820c", "qcom,apq8096-sbc";
+};
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
new file mode 100644
index 0000000..afb218c
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
@@ -0,0 +1,88 @@
+/*
+ * Copyright (c) 2014-2016, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "msm8996.dtsi"
+#include "apq8096-db820c-pins.dtsi"
+
+/ {
+	aliases {
+		serial0 = &blsp2_uart1;
+		serial1 = &blsp2_uart2;
+		i2c0	= &blsp1_i2c2;
+		i2c1	= &blsp2_i2c1;
+		i2c2	= &blsp2_i2c0;
+		spi0	= &blsp1_spi0;
+		spi1	= &blsp2_spi5;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	soc {
+		serial@75b0000 {
+			label = "LS-UART1";
+			status = "okay";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_uart1_2pins_default>;
+			pinctrl-1 = <&blsp2_uart1_2pins_sleep>;
+		};
+
+		serial@75b1000 {
+			label = "LS-UART0";
+			status = "okay";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_uart2_4pins_default>;
+			pinctrl-1 = <&blsp2_uart2_4pins_sleep>;
+		};
+
+		i2c@07577000 {
+		/* On Low speed expansion */
+			label = "LS-I2C0";
+			status = "okay";
+		};
+
+		i2c@075b6000 {
+		/* On Low speed expansion */
+			label = "LS-I2C1";
+			status = "okay";
+		};
+
+		spi@07575000 {
+		/* On Low speed expansion */
+			label = "LS-SPI0";
+			status = "okay";
+		};
+
+		i2c@075b5000 {
+		/* On High speed expansion */
+			label = "HS-I2C2";
+			status = "okay";
+		};
+
+		spi@075ba000{
+		/* On High speed expansion */
+			label = "HS-SPI1";
+			status = "okay";
+		};
+
+		sdhci@74a4900 {
+		/* External SD card */
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
+			pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
+			cd-gpios = <&msmgpio 38 0x1>;
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 11bdc24..466ca57 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -86,6 +86,11 @@
 			reg = <0x0 0x89300000 0x0 0x600000>;
 			no-map;
 		};
+
+		mba_mem: mba@8ea00000 {
+			no-map;
+			reg = <0 0x8ea00000 0 0x100000>;
+		};
 	};
 
 	cpus {
@@ -155,6 +160,49 @@
 		interrupts = <GIC_PPI 7 GIC_CPU_MASK_SIMPLE(4)>;
 	};
 
+	thermal-zones {
+		cpu-thermal0 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 4>;
+
+			trips {
+				cpu_alert0: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit0: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-thermal1 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 3>;
+
+			trips {
+				cpu_alert1: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit1: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
@@ -187,10 +235,11 @@
 	};
 
 	firmware {
-		scm {
+		scm: scm {
 			compatible = "qcom,scm";
 			clocks = <&gcc GCC_CRYPTO_CLK>, <&gcc GCC_CRYPTO_AXI_CLK>, <&gcc GCC_CRYPTO_AHB_CLK>;
 			clock-names = "core", "bus", "iface";
+			#reset-cells = <1>;
 		};
 	};
 
@@ -228,6 +277,11 @@
 			reg = <0x1905000 0x20000>;
 		};
 
+		tcsr: syscon@1937000 {
+			compatible = "qcom,tcsr-msm8916", "syscon";
+			reg = <0x1937000 0x30000>;
+		};
+
 		tcsr_mutex: hwlock {
 			compatible = "qcom,tcsr-mutex";
 			syscon = <&tcsr_mutex_regs 0 0x1000>;
@@ -483,7 +537,7 @@
 			compatible = "qcom,ci-hdrc";
 			reg = <0x78d9000 0x400>;
 			dr_mode = "peripheral";
-			interrupts = <GIC_SPI 134 IRQ_TYPE_NONE>;
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
 			usb-phy = <&usb_otg>;
 			status = "disabled";
 		};
@@ -491,7 +545,7 @@
 		usb_host: ehci@78d9000 {
 			compatible = "qcom,ehci-host";
 			reg = <0x78d9000 0x400>;
-			interrupts = <GIC_SPI 134 IRQ_TYPE_NONE>;
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
 			usb-phy = <&usb_otg>;
 			status = "disabled";
 		};
@@ -499,8 +553,8 @@
 		usb_otg: phy@78d9000 {
 			compatible = "qcom,usb-otg-snps";
 			reg = <0x78d9000 0x400>;
-			interrupts = <GIC_SPI 134 IRQ_TYPE_EDGE_BOTH>,
-				     <GIC_SPI 140 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
 
 			qcom,vdd-levels = <500000 1000000 1320000>;
 			qcom,phy-init-sequence = <0x44 0x6B 0x24 0x13>;
@@ -594,7 +648,7 @@
 			      <0x200a000 0x002100>;
 			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
 			interrupt-names = "periph_irq";
-			interrupts = <GIC_SPI 190 IRQ_TYPE_NONE>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
 			qcom,ee = <0>;
 			qcom,channel = <0>;
 			#address-cells = <2>;
@@ -609,6 +663,144 @@
 			clocks = <&gcc GCC_PRNG_AHB_CLK>;
 			clock-names = "core";
 		};
+
+		qfprom: qfprom@5c000 {
+			compatible = "qcom,qfprom";
+			reg = <0x5c000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			tsens_caldata: caldata@d0 {
+				reg = <0xd0 0x8>;
+			};
+			tsens_calsel: calsel@ec {
+				reg = <0xec 0x4>;
+			};
+		};
+
+		tsens: thermal-sensor@4a8000 {
+			compatible = "qcom,msm8916-tsens";
+			reg = <0x4a8000 0x2000>;
+			nvmem-cells = <&tsens_caldata>, <&tsens_calsel>;
+			nvmem-cell-names = "calib", "calib_sel";
+			#thermal-sensor-cells = <1>;
+		};
+
+		mdss: mdss@1a00000 {
+			compatible = "qcom,mdss";
+			reg = <0x1a00000 0x1000>,
+			      <0x1ac8000 0x3000>;
+			reg-names = "mdss_phys", "vbif_phys";
+
+			power-domains = <&gcc MDSS_GDSC>;
+
+			clocks = <&gcc GCC_MDSS_AHB_CLK>,
+				 <&gcc GCC_MDSS_AXI_CLK>,
+				 <&gcc GCC_MDSS_VSYNC_CLK>;
+			clock-names = "iface_clk",
+				      "bus_clk",
+				      "vsync_clk";
+
+			interrupts = <0 72 0>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			mdp: mdp@1a01000 {
+				compatible = "qcom,mdp5";
+				reg = <0x1a01000 0x90000>;
+				reg-names = "mdp_phys";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0 0>;
+
+				clocks = <&gcc GCC_MDSS_AHB_CLK>,
+					 <&gcc GCC_MDSS_AXI_CLK>,
+					 <&gcc GCC_MDSS_MDP_CLK>,
+					 <&gcc GCC_MDSS_VSYNC_CLK>;
+				clock-names = "iface_clk",
+					      "bus_clk",
+					      "core_clk",
+					      "vsync_clk";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdp5_intf1_out: endpoint {
+							remote-endpoint = <&dsi0_in>;
+						};
+					};
+				};
+			};
+
+			dsi0: dsi@1a98000 {
+				compatible = "qcom,mdss-dsi-ctrl";
+				reg = <0x1a98000 0x25c>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4 0>;
+
+				assigned-clocks = <&gcc BYTE0_CLK_SRC>,
+						  <&gcc PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&dsi_phy0 0>,
+							 <&dsi_phy0 1>;
+
+				clocks = <&gcc GCC_MDSS_MDP_CLK>,
+					 <&gcc GCC_MDSS_AHB_CLK>,
+					 <&gcc GCC_MDSS_AXI_CLK>,
+					 <&gcc GCC_MDSS_BYTE0_CLK>,
+					 <&gcc GCC_MDSS_PCLK0_CLK>,
+					 <&gcc GCC_MDSS_ESC0_CLK>;
+				clock-names = "mdp_core_clk",
+					      "iface_clk",
+					      "bus_clk",
+					      "byte_clk",
+					      "pixel_clk",
+					      "core_clk";
+				phys = <&dsi_phy0>;
+				phy-names = "dsi-phy";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						dsi0_in: endpoint {
+							remote-endpoint = <&mdp5_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						dsi0_out: endpoint {
+						};
+					};
+				};
+			};
+
+			dsi_phy0: dsi-phy@1a98300 {
+				compatible = "qcom,dsi-phy-28nm-lp";
+				reg = <0x1a98300 0xd4>,
+				      <0x1a98500 0x280>,
+				      <0x1a98780 0x30>;
+				reg-names = "dsi_pll",
+					    "dsi_phy",
+					    "dsi_phy_regulator";
+
+				#clock-cells = <1>;
+
+				clocks = <&gcc GCC_MDSS_AHB_CLK>;
+				clock-names = "iface_clk";
+			};
+		};
 	};
 
 	smd {
@@ -657,6 +849,88 @@
 			};
 		};
 	};
+
+	hexagon-smp2p {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+
+		interrupts = <0 27 IRQ_TYPE_EDGE_RISING>;
+
+		qcom,ipc = <&apcs 8 14>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		hexagon_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+
+			#qcom,smem-state-cells = <1>;
+		};
+
+		hexagon_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	wcnss-smp2p {
+		compatible = "qcom,smp2p";
+		qcom,smem = <451>, <431>;
+
+		interrupts = <0 143 IRQ_TYPE_EDGE_RISING>;
+
+		qcom,ipc = <&apcs 8 18>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <4>;
+
+		wcnss_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+
+			#qcom,smem-state-cells = <1>;
+		};
+
+		wcnss_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smsm {
+		compatible = "qcom,smsm";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		qcom,ipc-1 = <&apcs 0 13>;
+		qcom,ipc-6 = <&apcs 0 19>;
+
+		apps_smsm: apps@0 {
+			reg = <0>;
+
+			#qcom,smem-state-cells = <1>;
+		};
+
+		hexagon_smsm: hexagon@1 {
+			reg = <1>;
+			interrupts = <0 26 IRQ_TYPE_EDGE_RISING>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		wcnss_smsm: wcnss@6 {
+			reg = <6>;
+			interrupts = <0 144 IRQ_TYPE_EDGE_RISING>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
 };
 
 #include "msm8916-pins.dtsi"
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 55ec3e8..338f82a 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -97,6 +97,92 @@
 		};
 	};
 
+	thermal-zones {
+		cpu-thermal0 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 3>;
+
+			trips {
+				cpu_alert0: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit0: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-thermal1 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 5>;
+
+			trips {
+				cpu_alert1: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit1: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-thermal2 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 8>;
+
+			trips {
+				cpu_alert2: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit2: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-thermal3 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 10>;
+
+			trips {
+				cpu_alert3: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit3: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
@@ -181,6 +267,12 @@
 			status = "disabled";
 		};
 
+		tsens0: thermal-sensor@4a8000 {
+			compatible = "qcom,msm8996-tsens";
+			reg = <0x4a8000 0x2000>;
+			#thermal-sensor-cells = <1>;
+		};
+
 		blsp2_uart1: serial@75b0000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 			reg = <0x75b0000 0x1000>;
@@ -339,7 +431,7 @@
 			      <0x400a000 0x002100>;
 			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
 			interrupt-names = "periph_irq";
-			interrupts = <GIC_SPI 326 IRQ_TYPE_NONE>;
+			interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>;
 			qcom,ee = <0>;
 			qcom,channel = <0>;
 			#address-cells = <2>;
diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index 17139f7..eb72830 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -1,4 +1,4 @@
-dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-x.dtb
+dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-x.dtb r8a7795-h3ulcb.dtb
 dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-x.dtb
 
 always		:= $(dtb-y)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
new file mode 100644
index 0000000..bcb11a8
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
@@ -0,0 +1,328 @@
+/*
+ * Device Tree Source for the H3ULCB board
+ *
+ * Copyright (C) 2016 Renesas Electronics Corp.
+ * Copyright (C) 2016 Cogent Embedded, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "r8a7795.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Renesas H3ULCB board based on r8a7795";
+	compatible = "renesas,h3ulcb", "renesas,r8a7795";
+
+	aliases {
+		serial0 = &scif2;
+		ethernet0 = &avb;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x38000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led5 {
+			gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
+		};
+		led6 {
+			gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	keyboard {
+		compatible = "gpio-keys";
+
+		key-1 {
+			linux,code = <KEY_1>;
+			label = "SW3";
+			wakeup-source;
+			debounce-interval = <20>;
+			gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	x12_clk: x12 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+
+	vcc_sdhi0: regulator-vcc-sdhi0 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi0: regulator-vccq-sdhi0 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1
+			  1800000 0>;
+	};
+
+	audio_clkout: audio-clkout {
+		/*
+		 * This is same as <&rcar_sound 0>
+		 * but needed to avoid cs2000/rcar_sound probe dead-lock
+		 */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <11289600>;
+	};
+
+	rsnd_ak4613: sound {
+		compatible = "simple-audio-card";
+
+		simple-audio-card,format = "left_j";
+		simple-audio-card,bitclock-master = <&sndcpu>;
+		simple-audio-card,frame-master = <&sndcpu>;
+
+		sndcpu: simple-audio-card,cpu {
+			sound-dai = <&rcar_sound>;
+		};
+
+		sndcodec: simple-audio-card,codec {
+			sound-dai = <&ak4613>;
+		};
+	};
+};
+
+&extal_clk {
+	clock-frequency = <16666666>;
+};
+
+&extalr_clk {
+	clock-frequency = <32768>;
+};
+
+&pfc {
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
+	scif2_pins: scif2 {
+		groups = "scif2_data_a";
+		function = "scif2";
+	};
+
+	scif_clk_pins: scif_clk {
+		groups = "scif_clk_a";
+		function = "scif_clk";
+	};
+
+	i2c2_pins: i2c2 {
+		groups = "i2c2_a";
+		function = "i2c2";
+	};
+
+	avb_pins: avb {
+		groups = "avb_mdc";
+		function = "avb";
+	};
+
+	sdhi0_pins_3v3: sd0_3v3 {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <3300>;
+	};
+
+	sdhi0_pins_1v8: sd0_1v8 {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <1800>;
+	};
+
+	sound_pins: sound {
+		groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a";
+		function = "ssi";
+	};
+
+	sound_clk_pins: sound-clk {
+		groups = "audio_clk_a_a", "audio_clk_b_a", "audio_clk_c_a",
+			 "audio_clkout_a", "audio_clkout3_a";
+		function = "audio_clk";
+	};
+
+	usb1_pins: usb1 {
+		groups = "usb1";
+		function = "usb1";
+	};
+};
+
+&scif2 {
+	pinctrl-0 = <&scif2_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&scif_clk {
+	clock-frequency = <14745600>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	clock-frequency = <100000>;
+
+	ak4613: codec@10 {
+		compatible = "asahi-kasei,ak4613";
+		#sound-dai-cells = <0>;
+		reg = <0x10>;
+		clocks = <&rcar_sound 3>;
+
+		asahi-kasei,in1-single-end;
+		asahi-kasei,in2-single-end;
+		asahi-kasei,out1-single-end;
+		asahi-kasei,out2-single-end;
+		asahi-kasei,out3-single-end;
+		asahi-kasei,out4-single-end;
+		asahi-kasei,out5-single-end;
+		asahi-kasei,out6-single-end;
+	};
+
+	cs2000: clk-multiplier@4f {
+		#clock-cells = <0>;
+		compatible = "cirrus,cs2000-cp";
+		reg = <0x4f>;
+		clocks = <&audio_clkout>, <&x12_clk>;
+		clock-names = "clk_in", "ref_clk";
+
+		assigned-clocks = <&cs2000>;
+		assigned-clock-rates = <24576000>; /* 1/1 divide */
+	};
+};
+
+&rcar_sound {
+	pinctrl-0 = <&sound_pins &sound_clk_pins>;
+	pinctrl-names = "default";
+
+	/* Single DAI */
+	#sound-dai-cells = <0>;
+
+	/* audio_clkout0/1/2/3 */
+	#clock-cells = <1>;
+	clock-frequency = <11289600>;
+
+	status = "okay";
+
+	/* update <audio_clk_b> to <cs2000> */
+	clocks = <&cpg CPG_MOD 1005>,
+		 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+		 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+		 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+		 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+		 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+		 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+		 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+		 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+		 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+		 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+		 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+		 <&audio_clk_a>, <&cs2000>,
+		 <&audio_clk_c>,
+		 <&cpg CPG_CORE R8A7795_CLK_S0D4>;
+
+	rcar_sound,dai {
+		dai0 {
+			playback = <&ssi0 &src0 &dvc0>;
+			capture  = <&ssi1 &src1 &dvc1>;
+		};
+	};
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins_3v3>;
+	pinctrl-1 = <&sdhi0_pins_1v8>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&vcc_sdhi0>;
+	vqmmc-supply = <&vccq_sdhi0>;
+	cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	status = "okay";
+};
+
+&ssi1 {
+	shared-pin;
+};
+
+&wdt0 {
+	timeout-sec = <60>;
+	status = "okay";
+};
+
+&audio_clk_a {
+	clock-frequency = <22579200>;
+};
+
+&avb {
+	pinctrl-0 = <&avb_pins>;
+	pinctrl-names = "default";
+	renesas,no-ether-link;
+	phy-handle = <&phy0>;
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		rxc-skew-ps = <900>;
+		rxdv-skew-ps = <0>;
+		rxd0-skew-ps = <0>;
+		rxd1-skew-ps = <0>;
+		rxd2-skew-ps = <0>;
+		rxd3-skew-ps = <0>;
+		txc-skew-ps = <900>;
+		txen-skew-ps = <0>;
+		txd0-skew-ps = <0>;
+		txd1-skew-ps = <0>;
+		txd2-skew-ps = <0>;
+		txd3-skew-ps = <0>;
+		reg = <0>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&usb2_phy1 {
+	pinctrl-0 = <&usb1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
index 98f0263..b1eab68 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
@@ -110,6 +110,17 @@
 			  1800000 0>;
 	};
 
+	vbus0_usb2: regulator-vbus0-usb2 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "USB20_VBUS0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio6 16 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
 	audio_clkout: audio_clkout {
 		/*
 		 * This is same as <&rcar_sound 0>
@@ -135,6 +146,52 @@
 			sound-dai = <&ak4613>;
 		};
 	};
+
+	vga-encoder {
+		compatible = "adi,adv7123";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7123_in: endpoint {
+					remote-endpoint = <&du_out_rgb>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+				adv7123_out: endpoint {
+					remote-endpoint = <&vga_in>;
+				};
+			};
+		};
+	};
+
+	vga {
+		compatible = "vga-connector";
+
+		port {
+			vga_in: endpoint {
+				remote-endpoint = <&adv7123_out>;
+			};
+		};
+	};
+};
+
+&du {
+	pinctrl-0 = <&du_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	ports {
+		port@0 {
+			endpoint {
+				remote-endpoint = <&adv7123_in>;
+			};
+		};
+	};
 };
 
 &extal_clk {
@@ -172,6 +229,11 @@
 		function = "avb";
 	};
 
+	du_pins: du {
+		groups = "du_rgb888", "du_sync", "du_oddf", "du_clk_out_0";
+		function = "du";
+	};
+
 	sdhi0_pins: sd0 {
 		groups = "sdhi0_data4", "sdhi0_ctrl";
 		function = "sdhi0";
@@ -193,6 +255,11 @@
 		function = "audio_clk";
 	};
 
+	usb0_pins: usb0 {
+		groups = "usb0";
+		function = "usb0";
+	};
+
 	usb1_pins: usb1 {
 		groups = "usb1";
 		function = "usb1";
@@ -369,6 +436,14 @@
 	status = "okay";
 };
 
+&usb2_phy0 {
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+
+	vbus-supply = <&vbus0_usb2>;
+	status = "okay";
+};
+
 &usb2_phy1 {
 	pinctrl-0 = <&usb1_pins>;
 	pinctrl-names = "default";
@@ -383,6 +458,10 @@
 	status = "okay";
 };
 
+&ehci0 {
+	status = "okay";
+};
+
 &ehci1 {
 	status = "okay";
 };
@@ -391,6 +470,10 @@
 	status = "okay";
 };
 
+&ohci0 {
+	status = "okay";
+};
+
 &ohci1 {
 	status = "okay";
 };
@@ -399,6 +482,10 @@
 	status = "okay";
 };
 
+&hsusb {
+	status = "okay";
+};
+
 &pcie_bus_clk {
 	clock-frequency = <100000000>;
 	status = "okay";
diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
index b902356..8c15040 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
@@ -328,7 +328,8 @@
 		};
 
 		audma0: dma-controller@ec700000 {
-			compatible = "renesas,rcar-dmac";
+			compatible = "renesas,dmac-r8a7795",
+				     "renesas,rcar-dmac";
 			reg = <0 0xec700000 0 0x10000>;
 			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH
 				      GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
@@ -360,7 +361,8 @@
 		};
 
 		audma1: dma-controller@ec720000 {
-			compatible = "renesas,rcar-dmac";
+			compatible = "renesas,dmac-r8a7795",
+				     "renesas,rcar-dmac";
 			reg = <0 0xec720000 0 0x10000>;
 			interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH
 				      GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH
@@ -1098,6 +1100,7 @@
 			reg = <0 0xee100000 0 0x2000>;
 			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 314>;
+			max-frequency = <200000000>;
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
 			status = "disabled";
 		};
@@ -1107,6 +1110,7 @@
 			reg = <0 0xee120000 0 0x2000>;
 			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 313>;
+			max-frequency = <200000000>;
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
 			status = "disabled";
 		};
@@ -1116,8 +1120,8 @@
 			reg = <0 0xee140000 0 0x2000>;
 			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 312>;
+			max-frequency = <200000000>;
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
-			cap-mmc-highspeed;
 			status = "disabled";
 		};
 
@@ -1126,8 +1130,8 @@
 			reg = <0 0xee160000 0 0x2000>;
 			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 311>;
+			max-frequency = <200000000>;
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
-			cap-mmc-highspeed;
 			status = "disabled";
 		};
 
@@ -1224,6 +1228,23 @@
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
 			status = "disabled";
 		};
+
+		hsusb: usb@e6590000 {
+			compatible = "renesas,usbhs-r8a7795",
+				     "renesas,rcar-gen3-usbhs";
+			reg = <0 0xe6590000 0 0x100>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 704>;
+			dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
+			       <&usb_dmac1 0>, <&usb_dmac1 1>;
+			dma-names = "ch0", "ch1", "ch2", "ch3";
+			renesas,buswait = <11>;
+			phys = <&usb2_phy0>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
 		pciec0: pcie@fe000000 {
 			compatible = "renesas,pcie-r8a7795";
 			reg = <0 0xfe000000 0 0x80000>;
@@ -1273,5 +1294,252 @@
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
 			status = "disabled";
 		};
+
+		vspbc: vsp@fe920000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe920000 0 0x8000>;
+			interrupts = <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 624>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+
+			renesas,fcp = <&fcpvb1>;
+		};
+
+		fcpvb1: fcp@fe92f000 {
+			compatible = "renesas,r8a7795-fcpv", "renesas,fcpv";
+			reg = <0 0xfe92f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 606>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+		};
+
+		fcpf0: fcp@fe950000 {
+			compatible = "renesas,r8a7795-fcpf", "renesas,fcpf";
+			reg = <0 0xfe950000 0 0x200>;
+			clocks = <&cpg CPG_MOD 615>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+		};
+
+		fcpf1: fcp@fe951000 {
+			compatible = "renesas,r8a7795-fcpf", "renesas,fcpf";
+			reg = <0 0xfe951000 0 0x200>;
+			clocks = <&cpg CPG_MOD 614>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+		};
+
+		fcpf2: fcp@fe952000 {
+			compatible = "renesas,r8a7795-fcpf", "renesas,fcpf";
+			reg = <0 0xfe952000 0 0x200>;
+			clocks = <&cpg CPG_MOD 613>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+		};
+
+		vspbd: vsp@fe960000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe960000 0 0x8000>;
+			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 626>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+
+			renesas,fcp = <&fcpvb0>;
+		};
+
+		fcpvb0: fcp@fe96f000 {
+			compatible = "renesas,r8a7795-fcpv", "renesas,fcpv";
+			reg = <0 0xfe96f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 607>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+		};
+
+		vspi0: vsp@fe9a0000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe9a0000 0 0x8000>;
+			interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 631>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+
+			renesas,fcp = <&fcpvi0>;
+		};
+
+		fcpvi0: fcp@fe9af000 {
+			compatible = "renesas,r8a7795-fcpv", "renesas,fcpv";
+			reg = <0 0xfe9af000 0 0x200>;
+			clocks = <&cpg CPG_MOD 611>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+		};
+
+		vspi1: vsp@fe9b0000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe9b0000 0 0x8000>;
+			interrupts = <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 630>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+
+			renesas,fcp = <&fcpvi1>;
+		};
+
+		fcpvi1: fcp@fe9bf000 {
+			compatible = "renesas,r8a7795-fcpv", "renesas,fcpv";
+			reg = <0 0xfe9bf000 0 0x200>;
+			clocks = <&cpg CPG_MOD 610>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+		};
+
+		vspi2: vsp@fe9c0000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe9c0000 0 0x8000>;
+			interrupts = <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 629>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+
+			renesas,fcp = <&fcpvi2>;
+		};
+
+		fcpvi2: fcp@fe9cf000 {
+			compatible = "renesas,r8a7795-fcpv", "renesas,fcpv";
+			reg = <0 0xfe9cf000 0 0x200>;
+			clocks = <&cpg CPG_MOD 609>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+		};
+
+		vspd0: vsp@fea20000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea20000 0 0x4000>;
+			interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 623>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+
+			renesas,fcp = <&fcpvd0>;
+		};
+
+		fcpvd0: fcp@fea27000 {
+			compatible = "renesas,r8a7795-fcpv", "renesas,fcpv";
+			reg = <0 0xfea27000 0 0x200>;
+			clocks = <&cpg CPG_MOD 603>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+		};
+
+		vspd1: vsp@fea28000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea28000 0 0x4000>;
+			interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 622>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+
+			renesas,fcp = <&fcpvd1>;
+		};
+
+		fcpvd1: fcp@fea2f000 {
+			compatible = "renesas,r8a7795-fcpv", "renesas,fcpv";
+			reg = <0 0xfea2f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 602>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+		};
+
+		vspd2: vsp@fea30000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea30000 0 0x4000>;
+			interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 621>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+
+			renesas,fcp = <&fcpvd2>;
+		};
+
+		fcpvd2: fcp@fea37000 {
+			compatible = "renesas,r8a7795-fcpv", "renesas,fcpv";
+			reg = <0 0xfea37000 0 0x200>;
+			clocks = <&cpg CPG_MOD 601>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+		};
+
+		vspd3: vsp@fea38000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea38000 0 0x4000>;
+			interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 620>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+
+			renesas,fcp = <&fcpvd3>;
+		};
+
+		fcpvd3: fcp@fea3f000 {
+			compatible = "renesas,r8a7795-fcpv", "renesas,fcpv";
+			reg = <0 0xfea3f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 600>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+		};
+
+		fdp1@fe940000 {
+			compatible = "renesas,fdp1";
+			reg = <0 0xfe940000 0 0x2400>;
+			interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 119>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+			renesas,fcp = <&fcpf0>;
+		};
+
+		fdp1@fe944000 {
+			compatible = "renesas,fdp1";
+			reg = <0 0xfe944000 0 0x2400>;
+			interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 118>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+			renesas,fcp = <&fcpf1>;
+		};
+
+		fdp1@fe948000 {
+			compatible = "renesas,fdp1";
+			reg = <0 0xfe948000 0 0x2400>;
+			interrupts = <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 117>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+			renesas,fcp = <&fcpf2>;
+		};
+
+		du: display@feb00000 {
+			compatible = "renesas,du-r8a7795";
+			reg = <0 0xfeb00000 0 0x80000>,
+			      <0 0xfeb90000 0 0x14>;
+			reg-names = "du", "lvds.0";
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 724>,
+				 <&cpg CPG_MOD 723>,
+				 <&cpg CPG_MOD 722>,
+				 <&cpg CPG_MOD 721>,
+				 <&cpg CPG_MOD 727>;
+			clock-names = "du.0", "du.1", "du.2", "du.3", "lvds.0";
+			status = "disabled";
+
+			vsps = <&vspd0 &vspd1 &vspd2 &vspd3>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					du_out_rgb: endpoint {
+					};
+				};
+				port@1 {
+					reg = <1>;
+					du_out_hdmi0: endpoint {
+					};
+				};
+				port@2 {
+					reg = <2>;
+					du_out_hdmi1: endpoint {
+					};
+				};
+				port@3 {
+					reg = <3>;
+					du_out_lvds0: endpoint {
+					};
+				};
+			};
+		};
 	};
 };
diff --git a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts
index e72be38..13db7d6 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts
@@ -31,11 +31,27 @@
 	};
 };
 
+&pfc {
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
+	scif2_pins: scif2 {
+		groups = "scif2_data_a";
+		function = "scif2";
+	};
+	scif_clk_pins: scif_clk {
+		groups = "scif_clk_a";
+		function = "scif_clk";
+	};
+};
+
 &extal_clk {
 	clock-frequency = <16666666>;
 };
 
 &scif2 {
+	pinctrl-0 = <&scif2_pins>;
+	pinctrl-names = "default";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
index 1edf824..9217da9 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
@@ -107,6 +107,123 @@
 			status = "disabled";
 		};
 
+		gpio0: gpio@e6050000 {
+			compatible = "renesas,gpio-r8a7796",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6050000 0 0x50>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 0 16>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 912>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+		};
+
+		gpio1: gpio@e6051000 {
+			compatible = "renesas,gpio-r8a7796",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6051000 0 0x50>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 32 29>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 911>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+		};
+
+		gpio2: gpio@e6052000 {
+			compatible = "renesas,gpio-r8a7796",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6052000 0 0x50>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 64 15>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 910>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+		};
+
+		gpio3: gpio@e6053000 {
+			compatible = "renesas,gpio-r8a7796",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6053000 0 0x50>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 96 16>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 909>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+		};
+
+		gpio4: gpio@e6054000 {
+			compatible = "renesas,gpio-r8a7796",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6054000 0 0x50>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 128 18>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 908>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+		};
+
+		gpio5: gpio@e6055000 {
+			compatible = "renesas,gpio-r8a7796",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6055000 0 0x50>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 160 26>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 907>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+		};
+
+		gpio6: gpio@e6055400 {
+			compatible = "renesas,gpio-r8a7796",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6055400 0 0x50>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 192 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 906>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+		};
+
+		gpio7: gpio@e6055800 {
+			compatible = "renesas,gpio-r8a7796",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6055800 0 0x50>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 224 4>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 905>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+		};
+
+		pfc: pin-controller@e6060000 {
+			compatible = "renesas,pfc-r8a7796";
+			reg = <0 0xe6060000 0 0x50c>;
+		};
+
 		cpg: clock-controller@e6150000 {
 			compatible = "renesas,r8a7796-cpg-mssr";
 			reg = <0 0xe6150000 0 0x1000>;
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 7037a16..87669f6 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -1,5 +1,6 @@
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-evb-act8846.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-geekbox.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-orion-r68-meta.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-r88.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb.dtb
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts
new file mode 100644
index 0000000..5797933
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts
@@ -0,0 +1,382 @@
+/*
+ * Copyright (c) 2016 Matthias Brugger <mbrugger@suse.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "rk3368.dtsi"
+
+/ {
+	model = "Rockchip Orion R68";
+	compatible = "tronsmart,orion-r68-meta", "rockchip,rk3368";
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		pinctrl-0 = <&emmc_reset>;
+		pinctrl-names = "default";
+		reset-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+	};
+
+	ext_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+		clock-output-names = "ext_gmac";
+	};
+
+	keys: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwr_key>;
+
+		power {
+			wakeup-source;
+			gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+			label = "GPIO Power";
+			linux,code = <KEY_POWER>;
+		};
+	};
+
+	leds: gpio-leds {
+		compatible = "gpio-leds";
+
+		red {
+			gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
+			label = "orion:red:led";
+			pinctrl-names = "default";
+			pinctrl-0 = <&led_ctl>;
+			default-state = "on";
+		};
+
+		blue {
+			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+			label = "orion:blue:led";
+			pinctrl-names = "default";
+			pinctrl-0 = <&stby_pwren>;
+			default-state = "off";
+		};
+	};
+
+	vcc_18: vcc18-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_18";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	/* supplies both host and otg */
+	vcc_host: vcc-host-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio0 4 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&host_vbus_drv>;
+		regulator-name = "vcc_host";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc_io: vcc-io-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_io";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc_lan: vcc-lan-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_lan";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_sd: vcc-sd-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sd";
+		gpio = <&gpio3 11 GPIO_ACTIVE_LOW>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_sys: vcc-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vccio_sd: vcc-io-sd-regulator {
+		compatible = "regulator-fixed";
+		regulator-name= "vccio_sd";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_io>;
+	};
+
+	vccio_wl: vccio-wl-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vccio_wl";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_io>;
+	};
+
+	vdd_10: vdd-10-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_10";
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+	};
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	disable-wp;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&emmc_pwrseq>;
+	mmc-hs200-1_2v;
+	mmc-hs200-1_8v;
+	non-removable;
+	num-slots = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_MAC>;
+	assigned-clock-parents = <&ext_gmac>;
+	clock_in_out = "input";
+	phy-supply = <&vcc_lan>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	snps,reset-gpio = <&gpio3 12 0>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 1000000>;
+	tx_delay = <0x30>;
+	rx_delay = <0x10>;
+	status = "ok";
+};
+
+&i2c0 {
+	status = "okay";
+
+	vdd_cpu: syr827@40 {
+		compatible = "silergy,syr827";
+		reg = <0x40>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu";
+		regulator-enable-ramp-delay = <300>;
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <8000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	hym8563: hym8563@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "xin32k";
+		/* rtc_int is not connected */
+	};
+};
+
+&pinctrl {
+	pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
+		bias-disable;
+		drive-strength = <8>;
+	};
+
+	pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
+		bias-pull-up;
+		drive-strength = <8>;
+	};
+
+	emmc {
+		emmc_bus8: emmc-bus8 {
+			rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
+					<1 19 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
+					<1 20 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
+					<1 21 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
+					<1 22 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
+					<1 23 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
+					<1 24 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
+					<1 25 RK_FUNC_2 &pcfg_pull_up_drv_8ma>;
+		};
+
+		emmc-clk {
+			rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none_drv_8ma>;
+		};
+
+		emmc-cmd {
+			rockchip,pins = <1 26 RK_FUNC_2 &pcfg_pull_up_drv_8ma>;
+		};
+
+		emmc_reset: emmc-reset {
+			rockchip,pins = <2 3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	keys {
+		pwr_key: pwr-key {
+			rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	leds {
+		stby_pwren: stby-pwren {
+			rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		led_ctl: led-ctl {
+			rockchip,pins = <3 29 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdmmc {
+		sdmmc_clk: sdmmc-clk {
+			rockchip,pins = <2 9 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
+		};
+
+		sdmmc_cmd: sdmmc-cmd {
+			rockchip,pins = <2 10 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
+		};
+
+		sdmmc_cd: sdmmc-cd {
+			rockchip,pins = <2 11 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
+		};
+
+		sdmmc_bus1: sdmmc-bus1 {
+			rockchip,pins = <2 5 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
+		};
+
+		sdmmc_bus4: sdmmc-bus4 {
+			rockchip,pins = <2 5 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
+					<2 6 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
+					<2 7 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
+					<2 8 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
+		};
+	};
+
+	usb {
+		host_vbus_drv: host-vbus-drv {
+			rockchip,pins = <0 4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&saradc {
+	vref-supply = <&vcc_18>;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	clock-frequency = <50000000>;
+	clock-freq-min-max = <400000 50000000>;
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	keep-power-in-suspend;
+	num-slots = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_xfer>;
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
index 82a32e5..eed1ef6 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
@@ -248,7 +248,6 @@
 &sdio0 {
 	assigned-clocks = <&cru SCLK_SDIO0>;
 	assigned-clock-parents = <&cru PLL_CPLL>;
-	broken-cd;
 	bus-width = <4>;
 	cap-sd-highspeed;
 	cap-sdio-irq;
diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi b/arch/arm64/boot/dts/rockchip/rk3368.dtsi
index 4f44d11..0fcb214 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi
@@ -45,6 +45,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,boot-mode.h>
 #include <dt-bindings/thermal/thermal.h>
 
 / {
@@ -641,6 +642,15 @@
 			compatible = "rockchip,rk3368-pmu-io-voltage-domain";
 			status = "disabled";
 		};
+
+		reboot-mode {
+			compatible = "syscon-reboot-mode";
+			offset = <0x200>;
+			mode-normal = <BOOT_NORMAL>;
+			mode-recovery = <BOOT_RECOVERY>;
+			mode-bootloader = <BOOT_FASTBOOT>;
+			mode-loader = <BOOT_BL_DOWNLOAD>;
+		};
 	};
 
 	cru: clock-controller@ff760000 {
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-evb.dts b/arch/arm64/boot/dts/rockchip/rk3399-evb.dts
index d33aa06..8e82497 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-evb.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-evb.dts
@@ -49,6 +49,13 @@
 	compatible = "rockchip,rk3399-evb", "rockchip,rk3399",
 		     "google,rk3399evb-rev2";
 
+	clkin_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "clkin_gmac";
+		#clock-cells = <0>;
+	};
+
 	vdd_center: vdd-center {
 		compatible = "pwm-regulator";
 		pwms = <&pwm3 0 25000 0>;
@@ -69,18 +76,61 @@
 		regulator-max-microvolt = <3300000>;
 	};
 
+	vcc5v0_sys: vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vcc5v0_host: vcc5v0-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host_en>;
+		regulator-name = "vcc5v0_host";
+		vin-supply = <&vcc5v0_sys>;
+	};
+
 	vcc_phy: vcc-phy-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc_phy";
 		regulator-always-on;
 		regulator-boot-on;
 	};
+
+	vcc_phy: vcc-phy-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_phy";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
 };
 
 &emmc_phy {
 	status = "okay";
 };
 
+&gmac {
+	assigned-clocks = <&cru SCLK_RMII_SRC>;
+	assigned-clock-parents = <&clkin_gmac>;
+	clock_in_out = "input";
+	phy-supply = <&vcc_phy>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	snps,reset-gpio = <&gpio3 15 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+	tx_delay = <0x28>;
+	rx_delay = <0x11>;
+	status = "okay";
+};
+
 &pwm0 {
 	status = "okay";
 };
@@ -101,6 +151,36 @@
 	status = "okay";
 };
 
+&pcie_phy {
+	status = "disabled";
+};
+
+&pcie0 {
+	ep-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+	num-lanes = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_clkreqn>;
+	status = "disabled";
+};
+
+&u2phy0 {
+	status = "okay";
+};
+
+&u2phy0_host {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&u2phy1 {
+	status = "okay";
+};
+
+&u2phy1_host {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
 &uart2 {
 	status = "okay";
 };
@@ -133,4 +213,11 @@
 				<1 18 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
 	};
+
+	usb2 {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins =
+				<4 25 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
 };
diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index a6dd623..b65c193 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -45,6 +45,7 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/power/rk3399-power.h>
 #include <dt-bindings/thermal/thermal.h>
 
 / {
@@ -152,6 +153,16 @@
 		};
 	};
 
+	pmu_a53 {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_cluster0>;
+	};
+
+	pmu_a72 {
+		compatible = "arm,cortex-a72-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_cluster1>;
+	};
+
 	psci {
 		compatible = "arm,psci-1.0";
 		method = "smc";
@@ -159,10 +170,10 @@
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW 0>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW 0>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW 0>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW 0>;
 	};
 
 	xin24m: xin24m {
@@ -181,8 +192,8 @@
 		dmac_bus: dma-controller@ff6d0000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x0 0xff6d0000 0x0 0x4000>;
-			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH 0>;
 			#dma-cells = <1>;
 			clocks = <&cru ACLK_DMAC0_PERILP>;
 			clock-names = "apb_pclk";
@@ -191,19 +202,39 @@
 		dmac_peri: dma-controller@ff6e0000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x0 0xff6e0000 0x0 0x4000>;
-			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH 0>;
 			#dma-cells = <1>;
 			clocks = <&cru ACLK_DMAC1_PERILP>;
 			clock-names = "apb_pclk";
 		};
 	};
 
+	gmac: ethernet@fe300000 {
+		compatible = "rockchip,rk3399-gmac";
+		reg = <0x0 0xfe300000 0x0 0x10000>;
+		interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupt-names = "macirq";
+		clocks = <&cru SCLK_MAC>, <&cru SCLK_MAC_RX>,
+			 <&cru SCLK_MAC_TX>, <&cru SCLK_MACREF>,
+			 <&cru SCLK_MACREF_OUT>, <&cru ACLK_GMAC>,
+			 <&cru PCLK_GMAC>;
+		clock-names = "stmmaceth", "mac_clk_rx",
+			      "mac_clk_tx", "clk_mac_ref",
+			      "clk_mac_refout", "aclk_mac",
+			      "pclk_mac";
+		power-domains = <&power RK3399_PD_GMAC>;
+		resets = <&cru SRST_A_GMAC>;
+		reset-names = "stmmaceth";
+		rockchip,grf = <&grf>;
+		status = "disabled";
+	};
+
 	sdio0: dwmmc@fe310000 {
 		compatible = "rockchip,rk3399-dw-mshc",
 			     "rockchip,rk3288-dw-mshc";
 		reg = <0x0 0xfe310000 0x0 0x4000>;
-		interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH 0>;
 		clock-freq-min-max = <400000 150000000>;
 		clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
 			 <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
@@ -216,7 +247,7 @@
 		compatible = "rockchip,rk3399-dw-mshc",
 			     "rockchip,rk3288-dw-mshc";
 		reg = <0x0 0xfe320000 0x0 0x4000>;
-		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH 0>;
 		clock-freq-min-max = <400000 150000000>;
 		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
 			 <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
@@ -228,7 +259,7 @@
 	sdhci: sdhci@fe330000 {
 		compatible = "rockchip,rk3399-sdhci-5.1", "arasan,sdhci-5.1";
 		reg = <0x0 0xfe330000 0x0 0x10000>;
-		interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH 0>;
 		arasan,soc-ctl-syscon = <&grf>;
 		assigned-clocks = <&cru SCLK_EMMC>;
 		assigned-clock-rates = <200000000>;
@@ -241,19 +272,60 @@
 		status = "disabled";
 	};
 
+	pcie0: pcie@f8000000 {
+		compatible = "rockchip,rk3399-pcie";
+		reg = <0x0 0xf8000000 0x0 0x2000000>,
+		      <0x0 0xfd000000 0x0 0x1000000>;
+		reg-names = "axi-base", "apb-base";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		bus-range = <0x0 0x1>;
+		clocks = <&cru ACLK_PCIE>, <&cru ACLK_PERF_PCIE>,
+			 <&cru PCLK_PCIE>, <&cru SCLK_PCIE_PM>;
+		clock-names = "aclk", "aclk-perf",
+			      "hclk", "pm";
+		interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupt-names = "sys", "legacy", "client";
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie0_intc 0>,
+				<0 0 0 2 &pcie0_intc 1>,
+				<0 0 0 3 &pcie0_intc 2>,
+				<0 0 0 4 &pcie0_intc 3>;
+		msi-map = <0x0 &its 0x0 0x1000>;
+		phys = <&pcie_phy>;
+		phy-names = "pcie-phy";
+		ranges = <0x83000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x600000
+			  0x81000000 0x0 0xfa600000 0x0 0xfa600000 0x0 0x100000>;
+		resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>,
+			 <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE>;
+		reset-names = "core", "mgmt", "mgmt-sticky", "pipe";
+		status = "disabled";
+
+		pcie0_intc: interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+		};
+	};
+
 	usb_host0_ehci: usb@fe380000 {
 		compatible = "generic-ehci";
 		reg = <0x0 0xfe380000 0x0 0x20000>;
-		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH 0>;
 		clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST0_ARB>;
 		clock-names = "hclk_host0", "hclk_host0_arb";
+		phys = <&u2phy0_host>;
+		phy-names = "usb";
 		status = "disabled";
 	};
 
 	usb_host0_ohci: usb@fe3a0000 {
 		compatible = "generic-ohci";
 		reg = <0x0 0xfe3a0000 0x0 0x20000>;
-		interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH 0>;
 		clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST0_ARB>;
 		clock-names = "hclk_host0", "hclk_host0_arb";
 		status = "disabled";
@@ -262,16 +334,18 @@
 	usb_host1_ehci: usb@fe3c0000 {
 		compatible = "generic-ehci";
 		reg = <0x0 0xfe3c0000 0x0 0x20000>;
-		interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH 0>;
 		clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST1_ARB>;
 		clock-names = "hclk_host1", "hclk_host1_arb";
+		phys = <&u2phy1_host>;
+		phy-names = "usb";
 		status = "disabled";
 	};
 
 	usb_host1_ohci: usb@fe3e0000 {
 		compatible = "generic-ohci";
 		reg = <0x0 0xfe3e0000 0x0 0x20000>;
-		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH 0>;
 		clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST1_ARB>;
 		clock-names = "hclk_host1", "hclk_host1_arb";
 		status = "disabled";
@@ -279,7 +353,7 @@
 
 	gic: interrupt-controller@fee00000 {
 		compatible = "arm,gic-v3";
-		#interrupt-cells = <3>;
+		#interrupt-cells = <4>;
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
@@ -290,12 +364,34 @@
 		      <0x0 0xfff00000 0 0x10000>, /* GICC */
 		      <0x0 0xfff10000 0 0x10000>, /* GICH */
 		      <0x0 0xfff20000 0 0x10000>; /* GICV */
-		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
 		its: interrupt-controller@fee20000 {
 			compatible = "arm,gic-v3-its";
 			msi-controller;
 			reg = <0x0 0xfee20000 0x0 0x20000>;
 		};
+
+		ppi-partitions {
+			ppi_cluster0: interrupt-partition-0 {
+				affinity = <&cpu_l0 &cpu_l1 &cpu_l2 &cpu_l3>;
+			};
+
+			ppi_cluster1: interrupt-partition-1 {
+				affinity = <&cpu_b0 &cpu_b1>;
+			};
+		};
+	};
+
+	saradc: saradc@ff100000 {
+		compatible = "rockchip,rk3399-saradc";
+		reg = <0x0 0xff100000 0x0 0x100>;
+		interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH 0>;
+		#io-channel-cells = <1>;
+		clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
+		clock-names = "saradc", "apb_pclk";
+		resets = <&cru SRST_P_SARADC>;
+		reset-names = "saradc-apb";
+		status = "disabled";
 	};
 
 	i2c1: i2c@ff110000 {
@@ -305,7 +401,7 @@
 		assigned-clock-rates = <200000000>;
 		clocks = <&cru SCLK_I2C1>, <&cru PCLK_I2C1>;
 		clock-names = "i2c", "pclk";
-		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH 0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c1_xfer>;
 		#address-cells = <1>;
@@ -320,7 +416,7 @@
 		assigned-clock-rates = <200000000>;
 		clocks = <&cru SCLK_I2C2>, <&cru PCLK_I2C2>;
 		clock-names = "i2c", "pclk";
-		interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH 0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c2_xfer>;
 		#address-cells = <1>;
@@ -335,7 +431,7 @@
 		assigned-clock-rates = <200000000>;
 		clocks = <&cru SCLK_I2C3>, <&cru PCLK_I2C3>;
 		clock-names = "i2c", "pclk";
-		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH 0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c3_xfer>;
 		#address-cells = <1>;
@@ -350,7 +446,7 @@
 		assigned-clock-rates = <200000000>;
 		clocks = <&cru SCLK_I2C5>, <&cru PCLK_I2C5>;
 		clock-names = "i2c", "pclk";
-		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH 0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c5_xfer>;
 		#address-cells = <1>;
@@ -365,7 +461,7 @@
 		assigned-clock-rates = <200000000>;
 		clocks = <&cru SCLK_I2C6>, <&cru PCLK_I2C6>;
 		clock-names = "i2c", "pclk";
-		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH 0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c6_xfer>;
 		#address-cells = <1>;
@@ -380,7 +476,7 @@
 		assigned-clock-rates = <200000000>;
 		clocks = <&cru SCLK_I2C7>, <&cru PCLK_I2C7>;
 		clock-names = "i2c", "pclk";
-		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH 0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c7_xfer>;
 		#address-cells = <1>;
@@ -393,7 +489,7 @@
 		reg = <0x0 0xff180000 0x0 0x100>;
 		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
 		clock-names = "baudclk", "apb_pclk";
-		interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH 0>;
 		reg-shift = <2>;
 		reg-io-width = <4>;
 		pinctrl-names = "default";
@@ -406,7 +502,7 @@
 		reg = <0x0 0xff190000 0x0 0x100>;
 		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
 		clock-names = "baudclk", "apb_pclk";
-		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH 0>;
 		reg-shift = <2>;
 		reg-io-width = <4>;
 		pinctrl-names = "default";
@@ -419,7 +515,7 @@
 		reg = <0x0 0xff1a0000 0x0 0x100>;
 		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
 		clock-names = "baudclk", "apb_pclk";
-		interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH 0>;
 		reg-shift = <2>;
 		reg-io-width = <4>;
 		pinctrl-names = "default";
@@ -432,7 +528,7 @@
 		reg = <0x0 0xff1b0000 0x0 0x100>;
 		clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
 		clock-names = "baudclk", "apb_pclk";
-		interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH 0>;
 		reg-shift = <2>;
 		reg-io-width = <4>;
 		pinctrl-names = "default";
@@ -445,7 +541,7 @@
 		reg = <0x0 0xff1c0000 0x0 0x1000>;
 		clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
 		clock-names = "spiclk", "apb_pclk";
-		interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH 0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&spi0_clk &spi0_tx &spi0_rx &spi0_cs0>;
 		#address-cells = <1>;
@@ -458,7 +554,7 @@
 		reg = <0x0 0xff1d0000 0x0 0x1000>;
 		clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>;
 		clock-names = "spiclk", "apb_pclk";
-		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH 0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&spi1_clk &spi1_tx &spi1_rx &spi1_cs0>;
 		#address-cells = <1>;
@@ -471,7 +567,7 @@
 		reg = <0x0 0xff1e0000 0x0 0x1000>;
 		clocks = <&cru SCLK_SPI2>, <&cru PCLK_SPI2>;
 		clock-names = "spiclk", "apb_pclk";
-		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH 0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&spi2_clk &spi2_tx &spi2_rx &spi2_cs0>;
 		#address-cells = <1>;
@@ -484,7 +580,7 @@
 		reg = <0x0 0xff1f0000 0x0 0x1000>;
 		clocks = <&cru SCLK_SPI4>, <&cru PCLK_SPI4>;
 		clock-names = "spiclk", "apb_pclk";
-		interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH 0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&spi4_clk &spi4_tx &spi4_rx &spi4_cs0>;
 		#address-cells = <1>;
@@ -497,7 +593,7 @@
 		reg = <0x0 0xff200000 0x0 0x1000>;
 		clocks = <&cru SCLK_SPI5>, <&cru PCLK_SPI5>;
 		clock-names = "spiclk", "apb_pclk";
-		interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH 0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&spi5_clk &spi5_tx &spi5_rx &spi5_cs0>;
 		#address-cells = <1>;
@@ -577,7 +673,7 @@
 	tsadc: tsadc@ff260000 {
 		compatible = "rockchip,rk3399-tsadc";
 		reg = <0x0 0xff260000 0x0 0x100>;
-		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH 0>;
 		assigned-clocks = <&cru SCLK_TSADC>;
 		assigned-clock-rates = <750000>;
 		clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
@@ -594,6 +690,203 @@
 		status = "disabled";
 	};
 
+	qos_gmac: qos@ffa5c000 {
+		compatible = "syscon";
+		reg = <0x0 0xffa5c000 0x0 0x20>;
+	};
+
+	qos_hdcp: qos@ffa90000 {
+		compatible = "syscon";
+		reg = <0x0 0xffa90000 0x0 0x20>;
+	};
+
+	qos_iep: qos@ffa98000 {
+		compatible = "syscon";
+		reg = <0x0 0xffa98000 0x0 0x20>;
+	};
+
+	qos_isp0_m0: qos@ffaa0000 {
+		compatible = "syscon";
+		reg = <0x0 0xffaa0000 0x0 0x20>;
+	};
+
+	qos_isp0_m1: qos@ffaa0080 {
+		compatible = "syscon";
+		reg = <0x0 0xffaa0080 0x0 0x20>;
+	};
+
+	qos_isp1_m0: qos@ffaa8000 {
+		compatible = "syscon";
+		reg = <0x0 0xffaa8000 0x0 0x20>;
+	};
+
+	qos_isp1_m1: qos@ffaa8080 {
+		compatible = "syscon";
+		reg = <0x0 0xffaa8080 0x0 0x20>;
+	};
+
+	qos_rga_r: qos@ffab0000 {
+		compatible = "syscon";
+		reg = <0x0 0xffab0000 0x0 0x20>;
+	};
+
+	qos_rga_w: qos@ffab0080 {
+		compatible = "syscon";
+		reg = <0x0 0xffab0080 0x0 0x20>;
+	};
+
+	qos_video_m0: qos@ffab8000 {
+		compatible = "syscon";
+		reg = <0x0 0xffab8000 0x0 0x20>;
+	};
+
+	qos_video_m1_r: qos@ffac0000 {
+		compatible = "syscon";
+		reg = <0x0 0xffac0000 0x0 0x20>;
+	};
+
+	qos_video_m1_w: qos@ffac0080 {
+		compatible = "syscon";
+		reg = <0x0 0xffac0080 0x0 0x20>;
+	};
+
+	qos_vop_big_r: qos@ffac8000 {
+		compatible = "syscon";
+		reg = <0x0 0xffac8000 0x0 0x20>;
+	};
+
+	qos_vop_big_w: qos@ffac8080 {
+		compatible = "syscon";
+		reg = <0x0 0xffac8080 0x0 0x20>;
+	};
+
+	qos_vop_little: qos@ffad0000 {
+		compatible = "syscon";
+		reg = <0x0 0xffad0000 0x0 0x20>;
+	};
+
+	qos_gpu: qos@ffae0000 {
+		compatible = "syscon";
+		reg = <0x0 0xffae0000 0x0 0x20>;
+	};
+
+	pmu: power-management@ff310000 {
+		compatible = "rockchip,rk3399-pmu", "syscon", "simple-mfd";
+		reg = <0x0 0xff310000 0x0 0x1000>;
+
+		/*
+		 * Note: RK3399 supports 6 voltage domains including VD_CORE_L,
+		 * VD_CORE_B, VD_CENTER, VD_GPU, VD_LOGIC and VD_PMU.
+		 * Some of the power domains are grouped together for every
+		 * voltage domain.
+		 * The detail contents as below.
+		 */
+		power: power-controller {
+			compatible = "rockchip,rk3399-power-controller";
+			#power-domain-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* These power domains are grouped by VD_CENTER */
+			pd_iep@RK3399_PD_IEP {
+				reg = <RK3399_PD_IEP>;
+				clocks = <&cru ACLK_IEP>,
+					 <&cru HCLK_IEP>;
+				pm_qos = <&qos_iep>;
+			};
+			pd_rga@RK3399_PD_RGA {
+				reg = <RK3399_PD_RGA>;
+				clocks = <&cru ACLK_RGA>,
+					 <&cru HCLK_RGA>;
+				pm_qos = <&qos_rga_r>,
+					 <&qos_rga_w>;
+			};
+			pd_vcodec@RK3399_PD_VCODEC {
+				reg = <RK3399_PD_VCODEC>;
+				clocks = <&cru ACLK_VCODEC>,
+					 <&cru HCLK_VCODEC>;
+				pm_qos = <&qos_video_m0>;
+			};
+			pd_vdu@RK3399_PD_VDU {
+				reg = <RK3399_PD_VDU>;
+				clocks = <&cru ACLK_VDU>,
+					 <&cru HCLK_VDU>;
+				pm_qos = <&qos_video_m1_r>,
+					 <&qos_video_m1_w>;
+			};
+
+			/* These power domains are grouped by VD_GPU */
+			pd_gpu@RK3399_PD_GPU {
+				reg = <RK3399_PD_GPU>;
+				clocks = <&cru ACLK_GPU>;
+				pm_qos = <&qos_gpu>;
+			};
+
+			/* These power domains are grouped by VD_LOGIC */
+			pd_gmac@RK3399_PD_GMAC {
+				reg = <RK3399_PD_GMAC>;
+				clocks = <&cru ACLK_GMAC>;
+				pm_qos = <&qos_gmac>;
+			};
+			pd_vio@RK3399_PD_VIO {
+				reg = <RK3399_PD_VIO>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				pd_hdcp@RK3399_PD_HDCP {
+					reg = <RK3399_PD_HDCP>;
+					clocks = <&cru ACLK_HDCP>,
+						 <&cru HCLK_HDCP>,
+						 <&cru PCLK_HDCP>;
+					pm_qos = <&qos_hdcp>;
+				};
+				pd_isp0@RK3399_PD_ISP0 {
+					reg = <RK3399_PD_ISP0>;
+					clocks = <&cru ACLK_ISP0>,
+						 <&cru HCLK_ISP0>;
+					pm_qos = <&qos_isp0_m0>,
+						 <&qos_isp0_m1>;
+				};
+				pd_isp1@RK3399_PD_ISP1 {
+					reg = <RK3399_PD_ISP1>;
+					clocks = <&cru ACLK_ISP1>,
+						 <&cru HCLK_ISP1>;
+					pm_qos = <&qos_isp1_m0>,
+						 <&qos_isp1_m1>;
+				};
+				pd_tcpc0@RK3399_PD_TCPC0 {
+					reg = <RK3399_PD_TCPD0>;
+					clocks = <&cru SCLK_UPHY0_TCPDCORE>,
+						 <&cru SCLK_UPHY0_TCPDPHY_REF>;
+				};
+				pd_tcpc1@RK3399_PD_TCPC1 {
+					reg = <RK3399_PD_TCPD1>;
+					clocks = <&cru SCLK_UPHY1_TCPDCORE>,
+						 <&cru SCLK_UPHY1_TCPDPHY_REF>;
+				};
+				pd_vo@RK3399_PD_VO {
+					reg = <RK3399_PD_VO>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					pd_vopb@RK3399_PD_VOPB {
+						reg = <RK3399_PD_VOPB>;
+						clocks = <&cru ACLK_VOP0>,
+							 <&cru HCLK_VOP0>;
+						pm_qos = <&qos_vop_big_r>,
+							 <&qos_vop_big_w>;
+					};
+					pd_vopl@RK3399_PD_VOPL {
+						reg = <RK3399_PD_VOPL>;
+						clocks = <&cru ACLK_VOP1>,
+							 <&cru HCLK_VOP1>;
+						pm_qos = <&qos_vop_little>;
+					};
+				};
+			};
+		};
+	};
+
 	pmugrf: syscon@ff320000 {
 		compatible = "rockchip,rk3399-pmugrf", "syscon", "simple-mfd";
 		reg = <0x0 0xff320000 0x0 0x1000>;
@@ -611,7 +904,7 @@
 		reg = <0x0 0xff350000 0x0 0x1000>;
 		clocks = <&pmucru SCLK_SPI3_PMU>, <&pmucru PCLK_SPI3_PMU>;
 		clock-names = "spiclk", "apb_pclk";
-		interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH 0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&spi3_clk &spi3_tx &spi3_rx &spi3_cs0>;
 		#address-cells = <1>;
@@ -624,7 +917,7 @@
 		reg = <0x0 0xff370000 0x0 0x100>;
 		clocks = <&pmucru SCLK_UART4_PMU>, <&pmucru PCLK_UART4_PMU>;
 		clock-names = "baudclk", "apb_pclk";
-		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH 0>;
 		reg-shift = <2>;
 		reg-io-width = <4>;
 		pinctrl-names = "default";
@@ -639,7 +932,7 @@
 		assigned-clock-rates = <200000000>;
 		clocks = <&pmucru SCLK_I2C0_PMU>, <&pmucru PCLK_I2C0_PMU>;
 		clock-names = "i2c", "pclk";
-		interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH 0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c0_xfer>;
 		#address-cells = <1>;
@@ -654,7 +947,7 @@
 		assigned-clock-rates = <200000000>;
 		clocks = <&pmucru SCLK_I2C4_PMU>, <&pmucru PCLK_I2C4_PMU>;
 		clock-names = "i2c", "pclk";
-		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH 0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c4_xfer>;
 		#address-cells = <1>;
@@ -669,7 +962,7 @@
 		assigned-clock-rates = <200000000>;
 		clocks = <&pmucru SCLK_I2C8_PMU>, <&pmucru PCLK_I2C8_PMU>;
 		clock-names = "i2c", "pclk";
-		interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH 0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c8_xfer>;
 		#address-cells = <1>;
@@ -721,6 +1014,35 @@
 		status = "disabled";
 	};
 
+	efuse0: efuse@ff690000 {
+		compatible = "rockchip,rk3399-efuse";
+		reg = <0x0 0xff690000 0x0 0x80>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		clocks = <&cru PCLK_EFUSE1024NS>;
+		clock-names = "pclk_efuse";
+
+		/* Data cells */
+		cpub_leakage: cpu-leakage@17 {
+			reg = <0x17 0x1>;
+		};
+		gpu_leakage: gpu-leakage@18 {
+			reg = <0x18 0x1>;
+		};
+		center_leakage: center-leakage@19 {
+			reg = <0x19 0x1>;
+		};
+		cpul_leakage: cpu-leakage@1a {
+			reg = <0x1a 0x1>;
+		};
+		logic_leakage: logic-leakage@1b {
+			reg = <0x1b 0x1>;
+		};
+		wafer_info: wafer-info@1c {
+			reg = <0x1c 0x1>;
+		};
+	};
+
 	pmucru: pmu-clock-controller@ff750000 {
 		compatible = "rockchip,rk3399-pmucru";
 		reg = <0x0 0xff750000 0x0 0x1000>;
@@ -741,7 +1063,7 @@
 			<&cru ACLK_PERIHP>, <&cru HCLK_PERIHP>,
 			<&cru PCLK_PERIHP>,
 			<&cru ACLK_PERILP0>, <&cru HCLK_PERILP0>,
-			<&cru PCLK_PERILP0>,
+			<&cru PCLK_PERILP0>, <&cru ACLK_CCI>,
 			<&cru HCLK_PERILP1>, <&cru PCLK_PERILP1>;
 		assigned-clock-rates =
 			 <594000000>,  <800000000>,
@@ -749,7 +1071,7 @@
 			 <150000000>,   <75000000>,
 			  <37500000>,
 			 <100000000>,  <100000000>,
-			  <50000000>,
+			  <50000000>, <600000000>,
 			 <100000000>,   <50000000>;
 	};
 
@@ -764,6 +1086,40 @@
 			status = "disabled";
 		};
 
+		u2phy0: usb2-phy@e450 {
+			compatible = "rockchip,rk3399-usb2phy";
+			reg = <0xe450 0x10>;
+			clocks = <&cru SCLK_USB2PHY0_REF>;
+			clock-names = "phyclk";
+			#clock-cells = <0>;
+			clock-output-names = "clk_usbphy0_480m";
+			status = "disabled";
+
+			u2phy0_host: host-port {
+				#phy-cells = <0>;
+				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH 0>;
+				interrupt-names = "linestate";
+				status = "disabled";
+			};
+		};
+
+		u2phy1: usb2-phy@e460 {
+			compatible = "rockchip,rk3399-usb2phy";
+			reg = <0xe460 0x10>;
+			clocks = <&cru SCLK_USB2PHY1_REF>;
+			clock-names = "phyclk";
+			#clock-cells = <0>;
+			clock-output-names = "clk_usbphy1_480m";
+			status = "disabled";
+
+			u2phy1_host: host-port {
+				#phy-cells = <0>;
+				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH 0>;
+				interrupt-names = "linestate";
+				status = "disabled";
+			};
+		};
+
 		emmc_phy: phy@f780 {
 			compatible = "rockchip,rk3399-emmc-phy";
 			reg = <0xf780 0x24>;
@@ -772,19 +1128,85 @@
 			#phy-cells = <0>;
 			status = "disabled";
 		};
+
+		pcie_phy: pcie-phy {
+			compatible = "rockchip,rk3399-pcie-phy";
+			clocks = <&cru SCLK_PCIEPHY_REF>;
+			clock-names = "refclk";
+			#phy-cells = <0>;
+			resets = <&cru SRST_PCIEPHY>;
+			reset-names = "phy";
+			status = "disabled";
+		};
 	};
 
-	watchdog@ff840000 {
+	tcphy0: phy@ff7c0000 {
+		compatible = "rockchip,rk3399-typec-phy";
+		reg = <0x0 0xff7c0000 0x0 0x40000>;
+		clocks = <&cru SCLK_UPHY0_TCPDCORE>,
+			 <&cru SCLK_UPHY0_TCPDPHY_REF>;
+		clock-names = "tcpdcore", "tcpdphy-ref";
+		assigned-clocks = <&cru SCLK_UPHY0_TCPDCORE>;
+		assigned-clock-rates = <50000000>;
+		resets = <&cru SRST_UPHY0>,
+			 <&cru SRST_UPHY0_PIPE_L00>,
+			 <&cru SRST_P_UPHY0_TCPHY>;
+		reset-names = "uphy", "uphy-pipe", "uphy-tcphy";
+		rockchip,grf = <&grf>;
+		rockchip,typec-conn-dir = <0xe580 0 16>;
+		rockchip,usb3tousb2-en = <0xe580 3 19>;
+		rockchip,external-psm = <0xe588 14 30>;
+		rockchip,pipe-status = <0xe5c0 0 0>;
+		status = "disabled";
+
+		tcphy0_dp: dp-port {
+			#phy-cells = <0>;
+		};
+
+		tcphy0_usb3: usb3-port {
+			#phy-cells = <0>;
+		};
+	};
+
+	tcphy1: phy@ff800000 {
+		compatible = "rockchip,rk3399-typec-phy";
+		reg = <0x0 0xff800000 0x0 0x40000>;
+		clocks = <&cru SCLK_UPHY1_TCPDCORE>,
+			 <&cru SCLK_UPHY1_TCPDPHY_REF>;
+		clock-names = "tcpdcore", "tcpdphy-ref";
+		assigned-clocks = <&cru SCLK_UPHY1_TCPDCORE>;
+		assigned-clock-rates = <50000000>;
+		resets = <&cru SRST_UPHY1>,
+			 <&cru SRST_UPHY1_PIPE_L00>,
+			 <&cru SRST_P_UPHY1_TCPHY>;
+		reset-names = "uphy", "uphy-pipe", "uphy-tcphy";
+		rockchip,grf = <&grf>;
+		rockchip,typec-conn-dir = <0xe58c 0 16>;
+		rockchip,usb3tousb2-en = <0xe58c 3 19>;
+		rockchip,external-psm = <0xe594 14 30>;
+		rockchip,pipe-status = <0xe5c0 16 16>;
+		status = "disabled";
+
+		tcphy1_dp: dp-port {
+			#phy-cells = <0>;
+		};
+
+		tcphy1_usb3: usb3-port {
+			#phy-cells = <0>;
+		};
+	};
+
+	watchdog@ff848000 {
 		compatible = "snps,dw-wdt";
-		reg = <0x0 0xff840000 0x0 0x100>;
+		reg = <0x0 0xff848000 0x0 0x100>;
 		clocks = <&cru PCLK_WDT>;
-		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH 0>;
 	};
 
 	rktimer: rktimer@ff850000 {
 		compatible = "rockchip,rk3399-timer";
 		reg = <0x0 0xff850000 0x0 0x1000>;
-		interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH 0>;
 		clocks = <&cru PCLK_TIMER0>, <&cru SCLK_TIMER00>;
 		clock-names = "pclk", "timer";
 	};
@@ -792,7 +1214,7 @@
 	spdif: spdif@ff870000 {
 		compatible = "rockchip,rk3399-spdif";
 		reg = <0x0 0xff870000 0x0 0x1000>;
-		interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH 0>;
 		dmas = <&dmac_bus 7>;
 		dma-names = "tx";
 		clock-names = "mclk", "hclk";
@@ -806,7 +1228,7 @@
 		compatible = "rockchip,rk3399-i2s", "rockchip,rk3066-i2s";
 		reg = <0x0 0xff880000 0x0 0x1000>;
 		rockchip,grf = <&grf>;
-		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH 0>;
 		dmas = <&dmac_bus 0>, <&dmac_bus 1>;
 		dma-names = "tx", "rx";
 		clock-names = "i2s_clk", "i2s_hclk";
@@ -819,7 +1241,7 @@
 	i2s1: i2s@ff890000 {
 		compatible = "rockchip,rk3399-i2s", "rockchip,rk3066-i2s";
 		reg = <0x0 0xff890000 0x0 0x1000>;
-		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH 0>;
 		dmas = <&dmac_bus 2>, <&dmac_bus 3>;
 		dma-names = "tx", "rx";
 		clock-names = "i2s_clk", "i2s_hclk";
@@ -832,7 +1254,7 @@
 	i2s2: i2s@ff8a0000 {
 		compatible = "rockchip,rk3399-i2s", "rockchip,rk3066-i2s";
 		reg = <0x0 0xff8a0000 0x0 0x1000>;
-		interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH 0>;
 		dmas = <&dmac_bus 4>, <&dmac_bus 5>;
 		dma-names = "tx", "rx";
 		clock-names = "i2s_clk", "i2s_hclk";
@@ -852,7 +1274,7 @@
 			compatible = "rockchip,gpio-bank";
 			reg = <0x0 0xff720000 0x0 0x100>;
 			clocks = <&pmucru PCLK_GPIO0_PMU>;
-			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH 0>;
 
 			gpio-controller;
 			#gpio-cells = <0x2>;
@@ -865,7 +1287,7 @@
 			compatible = "rockchip,gpio-bank";
 			reg = <0x0 0xff730000 0x0 0x100>;
 			clocks = <&pmucru PCLK_GPIO1_PMU>;
-			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH 0>;
 
 			gpio-controller;
 			#gpio-cells = <0x2>;
@@ -878,7 +1300,7 @@
 			compatible = "rockchip,gpio-bank";
 			reg = <0x0 0xff780000 0x0 0x100>;
 			clocks = <&cru PCLK_GPIO2>;
-			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH 0>;
 
 			gpio-controller;
 			#gpio-cells = <0x2>;
@@ -891,7 +1313,7 @@
 			compatible = "rockchip,gpio-bank";
 			reg = <0x0 0xff788000 0x0 0x100>;
 			clocks = <&cru PCLK_GPIO3>;
-			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH 0>;
 
 			gpio-controller;
 			#gpio-cells = <0x2>;
@@ -904,7 +1326,7 @@
 			compatible = "rockchip,gpio-bank";
 			reg = <0x0 0xff790000 0x0 0x100>;
 			clocks = <&cru PCLK_GPIO4>;
-			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH 0>;
 
 			gpio-controller;
 			#gpio-cells = <0x2>;
@@ -955,6 +1377,72 @@
 			drive-strength = <13>;
 		};
 
+		clock {
+			clk_32k: clk-32k {
+				rockchip,pins = <0 0 RK_FUNC_2 &pcfg_pull_none>;
+			};
+		};
+
+		gmac {
+			rgmii_pins: rgmii-pins {
+				rockchip,pins =
+					/* mac_txclk */
+					<3 17 RK_FUNC_1 &pcfg_pull_none_13ma>,
+					/* mac_rxclk */
+					<3 14 RK_FUNC_1 &pcfg_pull_none>,
+					/* mac_mdio */
+					<3 13 RK_FUNC_1 &pcfg_pull_none>,
+					/* mac_txen */
+					<3 12 RK_FUNC_1 &pcfg_pull_none_13ma>,
+					/* mac_clk */
+					<3 11 RK_FUNC_1 &pcfg_pull_none>,
+					/* mac_rxdv */
+					<3 9 RK_FUNC_1 &pcfg_pull_none>,
+					/* mac_mdc */
+					<3 8 RK_FUNC_1 &pcfg_pull_none>,
+					/* mac_rxd1 */
+					<3 7 RK_FUNC_1 &pcfg_pull_none>,
+					/* mac_rxd0 */
+					<3 6 RK_FUNC_1 &pcfg_pull_none>,
+					/* mac_txd1 */
+					<3 5 RK_FUNC_1 &pcfg_pull_none_13ma>,
+					/* mac_txd0 */
+					<3 4 RK_FUNC_1 &pcfg_pull_none_13ma>,
+					/* mac_rxd3 */
+					<3 3 RK_FUNC_1 &pcfg_pull_none>,
+					/* mac_rxd2 */
+					<3 2 RK_FUNC_1 &pcfg_pull_none>,
+					/* mac_txd3 */
+					<3 1 RK_FUNC_1 &pcfg_pull_none_13ma>,
+					/* mac_txd2 */
+					<3 0 RK_FUNC_1 &pcfg_pull_none_13ma>;
+			};
+
+			rmii_pins: rmii-pins {
+				rockchip,pins =
+					/* mac_mdio */
+					<3 13 RK_FUNC_1 &pcfg_pull_none>,
+					/* mac_txen */
+					<3 12 RK_FUNC_1 &pcfg_pull_none_13ma>,
+					/* mac_clk */
+					<3 11 RK_FUNC_1 &pcfg_pull_none>,
+					/* mac_rxer */
+					<3 10 RK_FUNC_1 &pcfg_pull_none>,
+					/* mac_rxdv */
+					<3 9 RK_FUNC_1 &pcfg_pull_none>,
+					/* mac_mdc */
+					<3 8 RK_FUNC_1 &pcfg_pull_none>,
+					/* mac_rxd1 */
+					<3 7 RK_FUNC_1 &pcfg_pull_none>,
+					/* mac_rxd0 */
+					<3 6 RK_FUNC_1 &pcfg_pull_none>,
+					/* mac_txd1 */
+					<3 5 RK_FUNC_1 &pcfg_pull_none_13ma>,
+					/* mac_txd0 */
+					<3 4 RK_FUNC_1 &pcfg_pull_none_13ma>;
+			};
+		};
+
 		i2c0 {
 			i2c0_xfer: i2c0-xfer {
 				rockchip,pins =
@@ -1326,5 +1814,18 @@
 					<1 14 RK_FUNC_1 &pcfg_pull_none>;
 			};
 		};
+
+		pcie {
+			pcie_clkreqn: pci-clkreqn {
+				rockchip,pins =
+					<2 26 RK_FUNC_2 &pcfg_pull_none>;
+			};
+
+			pcie_clkreqnb: pci-clkreqnb {
+				rockchip,pins =
+					<4 24 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
 	};
 };
diff --git a/arch/arm64/boot/dts/socionext/Makefile b/arch/arm64/boot/dts/socionext/Makefile
index 299b67e..5538598 100644
--- a/arch/arm64/boot/dts/socionext/Makefile
+++ b/arch/arm64/boot/dts/socionext/Makefile
@@ -1,4 +1,6 @@
-dtb-$(CONFIG_ARCH_UNIPHIER) += uniphier-ph1-ld20-ref.dtb
+dtb-$(CONFIG_ARCH_UNIPHIER) += \
+	uniphier-ld11-ref.dtb \
+	uniphier-ld20-ref.dtb
 
 always		:= $(dtb-y)
 clean-files	:= *.dtb
diff --git a/arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts
similarity index 86%
copy from arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts
copy to arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts
index d594f40..7168cf8 100644
--- a/arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts
@@ -1,7 +1,8 @@
 /*
- * Device Tree Source for UniPhier PH1-sLD8 Reference Board
+ * Device Tree Source for UniPhier LD11 Reference Board
  *
- * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -43,17 +44,17 @@
  */
 
 /dts-v1/;
-/include/ "uniphier-ph1-sld8.dtsi"
+/include/ "uniphier-ld11.dtsi"
 /include/ "uniphier-ref-daughter.dtsi"
 /include/ "uniphier-support-card.dtsi"
 
 / {
-	model = "UniPhier PH1-sLD8 Reference Board";
-	compatible = "socionext,ph1-sld8-ref", "socionext,ph1-sld8";
+	model = "UniPhier LD11 Reference Board";
+	compatible = "socionext,uniphier-ld11-ref", "socionext,uniphier-ld11";
 
 	memory {
 		device_type = "memory";
-		reg = <0x80000000 0x20000000>;
+		reg = <0 0x80000000 0 0x40000000>;
 	};
 
 	chosen {
@@ -69,6 +70,8 @@
 		i2c1 = &i2c1;
 		i2c2 = &i2c2;
 		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
 	};
 };
 
@@ -80,14 +83,6 @@
 	status = "okay";
 };
 
-&serial2 {
-	status = "okay";
-};
-
-&serial3 {
-	status = "okay";
-};
-
 &i2c0 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi
similarity index 68%
copy from arch/arm64/boot/dts/socionext/uniphier-ph1-ld20.dtsi
copy to arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi
index d73bdc8..3eb4c42 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi
@@ -1,7 +1,8 @@
 /*
- * Device Tree Source for UniPhier PH1-LD20 SoC
+ * Device Tree Source for UniPhier LD11 SoC
  *
- * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -45,7 +46,7 @@
 /memreserve/ 0x80000000 0x00000008;	/* cpu-release-addr */
 
 / {
-	compatible = "socionext,ph1-ld20";
+	compatible = "socionext,uniphier-ld11";
 	#address-cells = <2>;
 	#size-cells = <2>;
 	interrupt-parent = <&gic>;
@@ -63,20 +64,11 @@
 					cpu = <&cpu1>;
 				};
 			};
-
-			cluster1 {
-				core0 {
-					cpu = <&cpu2>;
-				};
-				core1 {
-					cpu = <&cpu3>;
-				};
-			};
 		};
 
 		cpu0: cpu@0 {
 			device_type = "cpu";
-			compatible = "arm,cortex-a72", "arm,armv8";
+			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0 0x000>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0 0x80000000>;
@@ -84,27 +76,11 @@
 
 		cpu1: cpu@1 {
 			device_type = "cpu";
-			compatible = "arm,cortex-a72", "arm,armv8";
+			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0 0x001>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0 0x80000000>;
 		};
-
-		cpu2: cpu@100 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53", "arm,armv8";
-			reg = <0 0x100>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0 0x80000000>;
-		};
-
-		cpu3: cpu@101 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53", "arm,armv8";
-			reg = <0 0x101>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0 0x80000000>;
-		};
 	};
 
 	clocks {
@@ -113,18 +89,6 @@
 			#clock-cells = <0>;
 			clock-frequency = <25000000>;
 		};
-
-		uart_clk: uart_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <58820000>;
-		};
-
-		i2c_clk: i2c_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <50000000>;
-		};
 	};
 
 	timer {
@@ -148,7 +112,7 @@
 			interrupts = <0 33 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart0>;
-			clocks = <&uart_clk>;
+			clocks = <&peri_clk 0>;
 		};
 
 		serial1: serial@54006900 {
@@ -158,7 +122,7 @@
 			interrupts = <0 35 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart1>;
-			clocks = <&uart_clk>;
+			clocks = <&peri_clk 1>;
 		};
 
 		serial2: serial@54006a00 {
@@ -168,7 +132,7 @@
 			interrupts = <0 37 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart2>;
-			clocks = <&uart_clk>;
+			clocks = <&peri_clk 2>;
 		};
 
 		serial3: serial@54006b00 {
@@ -178,7 +142,7 @@
 			interrupts = <0 177 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart3>;
-			clocks = <&uart_clk>;
+			clocks = <&peri_clk 3>;
 		};
 
 		i2c0: i2c@58780000 {
@@ -190,7 +154,7 @@
 			interrupts = <0 41 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c0>;
-			clocks = <&i2c_clk>;
+			clocks = <&peri_clk 4>;
 			clock-frequency = <100000>;
 		};
 
@@ -203,7 +167,7 @@
 			interrupts = <0 42 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c1>;
-			clocks = <&i2c_clk>;
+			clocks = <&peri_clk 5>;
 			clock-frequency = <100000>;
 		};
 
@@ -213,7 +177,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			interrupts = <0 43 4>;
-			clocks = <&i2c_clk>;
+			clocks = <&peri_clk 6>;
 			clock-frequency = <400000>;
 		};
 
@@ -226,7 +190,7 @@
 			interrupts = <0 44 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c3>;
-			clocks = <&i2c_clk>;
+			clocks = <&peri_clk 7>;
 			clock-frequency = <100000>;
 		};
 
@@ -239,7 +203,7 @@
 			interrupts = <0 45 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c4>;
-			clocks = <&i2c_clk>;
+			clocks = <&peri_clk 8>;
 			clock-frequency = <100000>;
 		};
 
@@ -249,7 +213,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			interrupts = <0 25 4>;
-			clocks = <&i2c_clk>;
+			clocks = <&peri_clk 9>;
 			clock-frequency = <400000>;
 		};
 
@@ -259,6 +223,8 @@
 			reg = <0x58c00000 0x400>;
 			#address-cells = <2>;
 			#size-cells = <1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_system_bus>;
 		};
 
 		smpctrl@59800000 {
@@ -266,23 +232,106 @@
 			reg = <0x59801000 0x400>;
 		};
 
+		perictrl@59820000 {
+			compatible = "socionext,uniphier-perictrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59820000 0x200>;
+
+			peri_clk: clock {
+				compatible = "socionext,uniphier-ld11-peri-clock";
+				#clock-cells = <1>;
+			};
+
+			peri_rst: reset {
+				compatible = "socionext,uniphier-ld11-peri-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		usb0: usb@5a800100 {
+			compatible = "socionext,uniphier-ehci", "generic-ehci";
+			status = "disabled";
+			reg = <0x5a800100 0x100>;
+			interrupts = <0 243 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb0>;
+			clocks = <&mio_clk 7>, <&mio_clk 8>, <&mio_clk 12>;
+			resets = <&mio_rst 7>, <&mio_rst 8>, <&mio_rst 12>, <&sys_rst 8>;
+		};
+
+		usb1: usb@5a810100 {
+			compatible = "socionext,uniphier-ehci", "generic-ehci";
+			status = "disabled";
+			reg = <0x5a810100 0x100>;
+			interrupts = <0 244 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb1>;
+			clocks = <&mio_clk 7>, <&mio_clk 9>, <&mio_clk 13>;
+			resets = <&mio_rst 7>, <&mio_rst 9>, <&mio_rst 13>, <&sys_rst 8>;
+		};
+
+		usb2: usb@5a820100 {
+			compatible = "socionext,uniphier-ehci", "generic-ehci";
+			status = "disabled";
+			reg = <0x5a820100 0x100>;
+			interrupts = <0 245 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2>;
+			clocks = <&mio_clk 7>, <&mio_clk 10>, <&mio_clk 14>;
+			resets = <&mio_rst 7>, <&mio_rst 10>, <&mio_rst 14>, <&sys_rst 8>;
+		};
+
+		mioctrl@5b3e0000 {
+			compatible = "socionext,uniphier-mioctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x5b3e0000 0x800>;
+
+			mio_clk: clock {
+				compatible = "socionext,uniphier-ld11-mio-clock";
+				#clock-cells = <1>;
+			};
+
+			mio_rst: reset {
+				compatible = "socionext,uniphier-ld11-mio-reset";
+				#reset-cells = <1>;
+				resets = <&sys_rst 7>;
+			};
+		};
+
 		soc-glue@5f800000 {
-			compatible = "simple-mfd", "syscon";
+			compatible = "socionext,uniphier-soc-glue",
+				     "simple-mfd", "syscon";
 			reg = <0x5f800000 0x2000>;
 
 			pinctrl: pinctrl {
-				 compatible = "socionext,uniphier-ld20-pinctrl";
+				compatible = "socionext,uniphier-ld11-pinctrl";
 			};
 		};
 
 		gic: interrupt-controller@5fe00000 {
 			compatible = "arm,gic-v3";
 			reg = <0x5fe00000 0x10000>,	/* GICD */
-			      <0x5fe80000 0x80000>;	/* GICR */
+			      <0x5fe40000 0x80000>;	/* GICR */
 			interrupt-controller;
 			#interrupt-cells = <3>;
 			interrupts = <1 9 4>;
 		};
+
+		sysctrl@61840000 {
+			compatible = "socionext,uniphier-ld11-sysctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x61840000 0x4000>;
+
+			sys_clk: clock {
+				compatible = "socionext,uniphier-ld11-clock";
+				#clock-cells = <1>;
+			};
+
+			sys_rst: reset {
+				compatible = "socionext,uniphier-ld11-reset";
+				#reset-cells = <1>;
+			};
+		};
 	};
 };
 
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts
similarity index 88%
rename from arch/arm64/boot/dts/socionext/uniphier-ph1-ld20-ref.dts
rename to arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts
index 2adad8c..609162a 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20-ref.dts
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts
@@ -1,7 +1,8 @@
 /*
- * Device Tree Source for UniPhier PH1-LD20 Reference Board
+ * Device Tree Source for UniPhier LD20 Reference Board
  *
- * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -43,13 +44,13 @@
  */
 
 /dts-v1/;
-/include/ "uniphier-ph1-ld20.dtsi"
+/include/ "uniphier-ld20.dtsi"
 /include/ "uniphier-ref-daughter.dtsi"
 /include/ "uniphier-support-card.dtsi"
 
 / {
-	model = "UniPhier PH1-LD20 Reference Board";
-	compatible = "socionext,ph1-ld20-ref", "socionext,ph1-ld20";
+	model = "UniPhier LD20 Reference Board";
+	compatible = "socionext,uniphier-ld20-ref", "socionext,uniphier-ld20";
 
 	memory {
 		device_type = "memory";
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
similarity index 79%
rename from arch/arm64/boot/dts/socionext/uniphier-ph1-ld20.dtsi
rename to arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
index d73bdc8..08fd7cf 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
@@ -1,7 +1,8 @@
 /*
- * Device Tree Source for UniPhier PH1-LD20 SoC
+ * Device Tree Source for UniPhier LD20 SoC
  *
- * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -45,7 +46,7 @@
 /memreserve/ 0x80000000 0x00000008;	/* cpu-release-addr */
 
 / {
-	compatible = "socionext,ph1-ld20";
+	compatible = "socionext,uniphier-ld20";
 	#address-cells = <2>;
 	#size-cells = <2>;
 	interrupt-parent = <&gic>;
@@ -113,18 +114,6 @@
 			#clock-cells = <0>;
 			clock-frequency = <25000000>;
 		};
-
-		uart_clk: uart_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <58820000>;
-		};
-
-		i2c_clk: i2c_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <50000000>;
-		};
 	};
 
 	timer {
@@ -148,7 +137,7 @@
 			interrupts = <0 33 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart0>;
-			clocks = <&uart_clk>;
+			clocks = <&peri_clk 0>;
 		};
 
 		serial1: serial@54006900 {
@@ -158,7 +147,7 @@
 			interrupts = <0 35 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart1>;
-			clocks = <&uart_clk>;
+			clocks = <&peri_clk 1>;
 		};
 
 		serial2: serial@54006a00 {
@@ -168,7 +157,7 @@
 			interrupts = <0 37 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart2>;
-			clocks = <&uart_clk>;
+			clocks = <&peri_clk 2>;
 		};
 
 		serial3: serial@54006b00 {
@@ -178,7 +167,7 @@
 			interrupts = <0 177 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart3>;
-			clocks = <&uart_clk>;
+			clocks = <&peri_clk 3>;
 		};
 
 		i2c0: i2c@58780000 {
@@ -190,7 +179,7 @@
 			interrupts = <0 41 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c0>;
-			clocks = <&i2c_clk>;
+			clocks = <&peri_clk 4>;
 			clock-frequency = <100000>;
 		};
 
@@ -203,7 +192,7 @@
 			interrupts = <0 42 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c1>;
-			clocks = <&i2c_clk>;
+			clocks = <&peri_clk 5>;
 			clock-frequency = <100000>;
 		};
 
@@ -213,7 +202,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			interrupts = <0 43 4>;
-			clocks = <&i2c_clk>;
+			clocks = <&peri_clk 6>;
 			clock-frequency = <400000>;
 		};
 
@@ -226,7 +215,7 @@
 			interrupts = <0 44 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c3>;
-			clocks = <&i2c_clk>;
+			clocks = <&peri_clk 7>;
 			clock-frequency = <100000>;
 		};
 
@@ -239,7 +228,7 @@
 			interrupts = <0 45 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c4>;
-			clocks = <&i2c_clk>;
+			clocks = <&peri_clk 8>;
 			clock-frequency = <100000>;
 		};
 
@@ -249,7 +238,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			interrupts = <0 25 4>;
-			clocks = <&i2c_clk>;
+			clocks = <&peri_clk 9>;
 			clock-frequency = <400000>;
 		};
 
@@ -259,6 +248,8 @@
 			reg = <0x58c00000 0x400>;
 			#address-cells = <2>;
 			#size-cells = <1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_system_bus>;
 		};
 
 		smpctrl@59800000 {
@@ -266,12 +257,45 @@
 			reg = <0x59801000 0x400>;
 		};
 
+		mioctrl@59810000 {
+			compatible = "socionext,uniphier-mioctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59810000 0x800>;
+
+			mio_clk: clock {
+				compatible = "socionext,uniphier-ld20-mio-clock";
+				#clock-cells = <1>;
+			};
+
+			mio_rst: reset {
+				compatible = "socionext,uniphier-ld20-mio-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		perictrl@59820000 {
+			compatible = "socionext,uniphier-perictrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59820000 0x200>;
+
+			peri_clk: clock {
+				compatible = "socionext,uniphier-ld20-peri-clock";
+				#clock-cells = <1>;
+			};
+
+			peri_rst: reset {
+				compatible = "socionext,uniphier-ld20-peri-reset";
+				#reset-cells = <1>;
+			};
+		};
+
 		soc-glue@5f800000 {
-			compatible = "simple-mfd", "syscon";
+			compatible = "socionext,uniphier-soc-glue",
+				     "simple-mfd", "syscon";
 			reg = <0x5f800000 0x2000>;
 
 			pinctrl: pinctrl {
-				 compatible = "socionext,uniphier-ld20-pinctrl";
+				compatible = "socionext,uniphier-ld20-pinctrl";
 			};
 		};
 
@@ -283,6 +307,22 @@
 			#interrupt-cells = <3>;
 			interrupts = <1 9 4>;
 		};
+
+		sysctrl@61840000 {
+			compatible = "socionext,uniphier-sysctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x61840000 0x4000>;
+
+			sys_clk: clock {
+				compatible = "socionext,uniphier-ld20-clock";
+				#clock-cells = <1>;
+			};
+
+			sys_rst: reset {
+				compatible = "socionext,uniphier-ld20-reset";
+				#reset-cells = <1>;
+			};
+		};
 	};
 };
 
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts b/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts
index acb0527..3580896 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts
@@ -29,7 +29,7 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0x0 0x0 0x40000000>;
+		reg = <0x0 0x0 0x0 0x40000000>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
index 3e2e51f..68a90833 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
+++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
@@ -14,7 +14,7 @@
 / {
 	compatible = "xlnx,zynqmp";
 	#address-cells = <2>;
-	#size-cells = <1>;
+	#size-cells = <2>;
 
 	cpus {
 		#address-cells = <1>;
@@ -51,6 +51,7 @@
 
 	pmu {
 		compatible = "arm,armv8-pmuv3";
+		interrupt-parent = <&gic>;
 		interrupts = <0 143 4>,
 			     <0 144 4>,
 			     <0 145 4>,
@@ -75,15 +76,15 @@
 		compatible = "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <1>;
-		ranges;
+		ranges = <0 0 0 0 0xffffffff>;
 
 		gic: interrupt-controller@f9010000 {
 			compatible = "arm,gic-400", "arm,cortex-a15-gic";
 			#interrupt-cells = <3>;
 			reg = <0x0 0xf9010000 0x10000>,
-			      <0x0 0xf902f000 0x2000>,
+			      <0x0 0xf9020000 0x20000>,
 			      <0x0 0xf9040000 0x20000>,
-			      <0x0 0xf906f000 0x2000>;
+			      <0x0 0xf9060000 0x20000>;
 			interrupt-controller;
 			interrupt-parent = <&gic>;
 			interrupts = <1 9 0xf04>;
@@ -93,14 +94,14 @@
 	amba: amba {
 		compatible = "simple-bus";
 		#address-cells = <2>;
-		#size-cells = <1>;
+		#size-cells = <2>;
 		ranges;
 
 		can0: can@ff060000 {
 			compatible = "xlnx,zynq-can-1.0";
 			status = "disabled";
 			clock-names = "can_clk", "pclk";
-			reg = <0x0 0xff060000 0x1000>;
+			reg = <0x0 0xff060000 0x0 0x1000>;
 			interrupts = <0 23 4>;
 			interrupt-parent = <&gic>;
 			tx-fifo-depth = <0x40>;
@@ -111,7 +112,7 @@
 			compatible = "xlnx,zynq-can-1.0";
 			status = "disabled";
 			clock-names = "can_clk", "pclk";
-			reg = <0x0 0xff070000 0x1000>;
+			reg = <0x0 0xff070000 0x0 0x1000>;
 			interrupts = <0 24 4>;
 			interrupt-parent = <&gic>;
 			tx-fifo-depth = <0x40>;
@@ -123,7 +124,7 @@
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 57 4>, <0 57 4>;
-			reg = <0x0 0xff0b0000 0x1000>;
+			reg = <0x0 0xff0b0000 0x0 0x1000>;
 			clock-names = "pclk", "hclk", "tx_clk";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -134,7 +135,7 @@
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 59 4>, <0 59 4>;
-			reg = <0x0 0xff0c0000 0x1000>;
+			reg = <0x0 0xff0c0000 0x0 0x1000>;
 			clock-names = "pclk", "hclk", "tx_clk";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -145,7 +146,7 @@
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 61 4>, <0 61 4>;
-			reg = <0x0 0xff0d0000 0x1000>;
+			reg = <0x0 0xff0d0000 0x0 0x1000>;
 			clock-names = "pclk", "hclk", "tx_clk";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -156,7 +157,7 @@
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 63 4>, <0 63 4>;
-			reg = <0x0 0xff0e0000 0x1000>;
+			reg = <0x0 0xff0e0000 0x0 0x1000>;
 			clock-names = "pclk", "hclk", "tx_clk";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -170,7 +171,7 @@
 			interrupts = <0 16 4>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
-			reg = <0x0 0xff0a0000 0x1000>;
+			reg = <0x0 0xff0a0000 0x0 0x1000>;
 		};
 
 		i2c0: i2c@ff020000 {
@@ -178,7 +179,7 @@
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 17 4>;
-			reg = <0x0 0xff020000 0x1000>;
+			reg = <0x0 0xff020000 0x0 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 		};
@@ -188,15 +189,54 @@
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 18 4>;
-			reg = <0x0 0xff030000 0x1000>;
+			reg = <0x0 0xff030000 0x0 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 		};
 
+		pcie: pcie@fd0e0000 {
+			compatible = "xlnx,nwl-pcie-2.11";
+			status = "disabled";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			msi-controller;
+			device_type = "pci";
+			interrupt-parent = <&gic>;
+			interrupts = <0 118 4>,
+				    <0 117 4>,
+				    <0 116 4>,
+				    <0 115 4>,	/* MSI_1 [63...32] */
+				    <0 114 4>;	/* MSI_0 [31...0] */
+			interrupt-names = "misc", "dummy", "intx",
+					  "msi1", "msi0";
+			msi-parent = <&pcie>;
+			reg = <0x0 0xfd0e0000 0x0 0x1000>,
+			      <0x0 0xfd480000 0x0 0x1000>,
+			      <0x80 0x00000000 0x0 0x1000000>;
+			reg-names = "breg", "pcireg", "cfg";
+			ranges = <0x02000000 0x00000000 0xe0000000 0x00000000
+				  0xe0000000 0x00000000 0x10000000
+				  /* non-prefetchable memory */
+				  0x43000000 0x00000006 0x00000000 0x00000006
+				  0x00000000 0x00000002 0x00000000>;
+				  /* prefetchable memory */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <0x0 0x0 0x0 0x1 &pcie_intc 0x1>,
+					<0x0 0x0 0x0 0x2 &pcie_intc 0x2>,
+					<0x0 0x0 0x0 0x3 &pcie_intc 0x3>,
+					<0x0 0x0 0x0 0x4 &pcie_intc 0x4>;
+			pcie_intc: legacy-interrupt-controller {
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+			};
+		};
+
 		sata: ahci@fd0c0000 {
 			compatible = "ceva,ahci-1v84";
 			status = "disabled";
-			reg = <0x0 0xfd0c0000 0x2000>;
+			reg = <0x0 0xfd0c0000 0x0 0x2000>;
 			interrupt-parent = <&gic>;
 			interrupts = <0 133 4>;
 		};
@@ -206,7 +246,7 @@
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 48 4>;
-			reg = <0x0 0xff160000 0x1000>;
+			reg = <0x0 0xff160000 0x0 0x1000>;
 			clock-names = "clk_xin", "clk_ahb";
 		};
 
@@ -215,13 +255,13 @@
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 49 4>;
-			reg = <0x0 0xff170000 0x1000>;
+			reg = <0x0 0xff170000 0x0 0x1000>;
 			clock-names = "clk_xin", "clk_ahb";
 		};
 
 		smmu: smmu@fd800000 {
 			compatible = "arm,mmu-500";
-			reg = <0x0 0xfd800000 0x20000>;
+			reg = <0x0 0xfd800000 0x0 0x20000>;
 			#global-interrupts = <1>;
 			interrupt-parent = <&gic>;
 			interrupts = <0 157 4>,
@@ -236,7 +276,7 @@
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 19 4>;
-			reg = <0x0 0xff040000 0x1000>;
+			reg = <0x0 0xff040000 0x0 0x1000>;
 			clock-names = "ref_clk", "pclk";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -247,7 +287,7 @@
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 20 4>;
-			reg = <0x0 0xff050000 0x1000>;
+			reg = <0x0 0xff050000 0x0 0x1000>;
 			clock-names = "ref_clk", "pclk";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -258,7 +298,7 @@
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 36 4>, <0 37 4>, <0 38 4>;
-			reg = <0x0 0xff110000 0x1000>;
+			reg = <0x0 0xff110000 0x0 0x1000>;
 			timer-width = <32>;
 		};
 
@@ -267,7 +307,7 @@
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 39 4>, <0 40 4>, <0 41 4>;
-			reg = <0x0 0xff120000 0x1000>;
+			reg = <0x0 0xff120000 0x0 0x1000>;
 			timer-width = <32>;
 		};
 
@@ -276,7 +316,7 @@
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 42 4>, <0 43 4>, <0 44 4>;
-			reg = <0x0 0xff130000 0x1000>;
+			reg = <0x0 0xff130000 0x0 0x1000>;
 			timer-width = <32>;
 		};
 
@@ -285,7 +325,7 @@
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 45 4>, <0 46 4>, <0 47 4>;
-			reg = <0x0 0xff140000 0x1000>;
+			reg = <0x0 0xff140000 0x0 0x1000>;
 			timer-width = <32>;
 		};
 
@@ -294,7 +334,7 @@
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 21 4>;
-			reg = <0x0 0xff000000 0x1000>;
+			reg = <0x0 0xff000000 0x0 0x1000>;
 			clock-names = "uart_clk", "pclk";
 		};
 
@@ -303,7 +343,7 @@
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 22 4>;
-			reg = <0x0 0xff010000 0x1000>;
+			reg = <0x0 0xff010000 0x0 0x1000>;
 			clock-names = "uart_clk", "pclk";
 		};
 
@@ -312,7 +352,7 @@
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 65 4>;
-			reg = <0x0 0xfe200000 0x40000>;
+			reg = <0x0 0xfe200000 0x0 0x40000>;
 			clock-names = "clk_xin", "clk_ahb";
 		};
 
@@ -321,7 +361,7 @@
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 70 4>;
-			reg = <0x0 0xfe300000 0x40000>;
+			reg = <0x0 0xfe300000 0x0 0x40000>;
 			clock-names = "clk_xin", "clk_ahb";
 		};
 
@@ -329,8 +369,8 @@
 			compatible = "cdns,wdt-r1p2";
 			status = "disabled";
 			interrupt-parent = <&gic>;
-			interrupts = <0 52 1>;
-			reg = <0x0 0xfd4d0000 0x1000>;
+			interrupts = <0 113 1>;
+			reg = <0x0 0xfd4d0000 0x0 0x1000>;
 			timeout-sec = <10>;
 		};
 	};
diff --git a/arch/arm64/boot/dts/zte/Makefile b/arch/arm64/boot/dts/zte/Makefile
new file mode 100644
index 0000000..6678066
--- /dev/null
+++ b/arch/arm64/boot/dts/zte/Makefile
@@ -0,0 +1,5 @@
+dtb-$(CONFIG_ARCH_ZX) += zx296718-evb.dtb
+
+always		:= $(dtb-y)
+subdir-y	:= $(dts-dirs)
+clean-files	:= *.dtb
diff --git a/arch/arm/boot/dts/uniphier-proxstream2-vodka.dts b/arch/arm64/boot/dts/zte/zx296718-evb.dts
similarity index 74%
copy from arch/arm/boot/dts/uniphier-proxstream2-vodka.dts
copy to arch/arm64/boot/dts/zte/zx296718-evb.dts
index 1fb8bd7..e164ff6 100644
--- a/arch/arm/boot/dts/uniphier-proxstream2-vodka.dts
+++ b/arch/arm64/boot/dts/zte/zx296718-evb.dts
@@ -1,19 +1,18 @@
 /*
- * Device Tree Source for UniPhier ProXstream2 Vodka Board
- *
- * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright 2016 ZTE Corporation.
+ * Copyright 2016 Linaro Ltd.
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
  * licensing only applies to this file, and not this project as a
  * whole.
  *
- *  a) This file is free software; you can redistribute it and/or
+ *  a) This library is free software; you can redistribute it and/or
  *     modify it under the terms of the GNU General Public License as
  *     published by the Free Software Foundation; either version 2 of the
  *     License, or (at your option) any later version.
  *
- *     This file is distributed in the hope that it will be useful,
+ *     This library is distributed in the hope that it will be useful,
  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
@@ -43,36 +42,23 @@
  */
 
 /dts-v1/;
-/include/ "uniphier-proxstream2.dtsi"
+#include "zx296718.dtsi"
 
 / {
-	model = "UniPhier ProXstream2 Vodka Board";
-	compatible = "socionext,proxstream2-vodka", "socionext,proxstream2";
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x80000000>;
-	};
+	model = "ZTE zx296718 evaluation board";
+	compatible = "zte,zx296718-evb", "zte,zx296718";
 
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
 
-	aliases {
-		serial0 = &serial2;
-		serial1 = &serial0;
-		serial2 = &serial1;
-		i2c0 = &i2c0;
-		i2c4 = &i2c4;
-		i2c5 = &i2c5;
-		i2c6 = &i2c6;
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x40000000>;
 	};
+
 };
 
-&serial2 {
-	status = "okay";
-};
-
-&i2c0 {
+&uart0 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/zte/zx296718.dtsi b/arch/arm64/boot/dts/zte/zx296718.dtsi
new file mode 100644
index 0000000..a223066
--- /dev/null
+++ b/arch/arm64/boot/dts/zte/zx296718.dtsi
@@ -0,0 +1,292 @@
+/*
+ * Copyright 2016 ZTE Corporation.
+ * Copyright 2016 Linaro Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	compatible = "zte,zx296718";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&gic>;
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53","arm,armv8";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53","arm,armv8";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53","arm,armv8";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53","arm,armv8";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+		};
+	};
+
+	clk24k: clk-24k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000>;
+		clock-output-names = "rtcclk";
+	};
+
+	osc32k: clk-osc32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32000>;
+		clock-output-names = "osc32k";
+	};
+
+	osc12m: clk-osc12m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12000000>;
+		clock-output-names = "osc12m";
+	};
+
+	osc24m: clk-osc24m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "osc24m";
+	};
+
+	osc25m: clk-osc25m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+		clock-output-names = "osc25m";
+	};
+
+	osc60m: clk-osc60m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <60000000>;
+		clock-output-names = "osc60m";
+	};
+
+	osc99m: clk-osc99m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <99000000>;
+		clock-output-names = "osc99m";
+	};
+
+	osc125m: clk-osc125m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+		clock-output-names = "osc125m";
+	};
+
+	osc198m: clk-osc198m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <198000000>;
+		clock-output-names = "osc198m";
+	};
+
+	pll_audio: clk-pll-884m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <884000000>;
+		clock-output-names = "pll_audio";
+	};
+
+	pll_ddr: clk-pll-932m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <932000000>;
+		clock-output-names = "pll_ddr";
+	};
+
+	pll_hsic: clk-pll-960m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <960000000>;
+		clock-output-names = "pll_hsic";
+	};
+
+	pll_mac: clk-pll-1000m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <1000000000>;
+		clock-output-names = "pll_mac";
+	};
+
+	pll_vga: clk-pll-1073m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <1073000000>;
+		clock-output-names = "pll_vga";
+	};
+
+	pll_mm0: clk-pll-1188m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <1188000000>;
+		clock-output-names = "pll_mm0";
+	};
+
+	pll_mm1: clk-pll-1296m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <1296000000>;
+		clock-output-names = "pll_mm1";
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gic: interrupt-controller@2a00000 {
+		compatible = "arm,gic-v3";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		#redistributor-regions = <6>;
+		redistributor-stride = <0x0 0x40000>;
+		interrupt-controller;
+		reg = <0x02a00000 0x10000>,
+		      <0x02b00000 0x20000>,
+		      <0x02b20000 0x20000>,
+		      <0x02b40000 0x20000>,
+		      <0x02b60000 0x20000>,
+		      <0x02b80000 0x20000>,
+		      <0x02ba0000 0x20000>;
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+
+		aon_sysctrl: aon-sysctrl@116000 {
+			compatible = "zte,zx296718-aon-sysctrl", "syscon";
+			reg = <0x116000 0x1000>;
+		};
+
+		uart0: uart@11f000 {
+			compatible = "arm,pl011", "arm,primecell";
+			arm,primecell-periphid = <0x001feffe>;
+			reg = <0x11f000 0x1000>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24m>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		dma: dma-controller@1460000 {
+			compatible = "zte,zx296702-dma";
+			reg = <0x01460000 0x1000>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24m>;
+			clock-names = "dmaclk";
+			#dma-cells = <1>;
+			dma-channels = <32>;
+			dma-requests = <32>;
+		};
+
+		sysctrl: sysctrl@1463000 {
+			compatible = "zte,zx296718-sysctrl", "syscon";
+			reg = <0x1463000 0x1000>;
+		};
+	};
+};
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index eadf485..dab2cb0 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -57,10 +57,12 @@
 CONFIG_ARCH_VEXPRESS=y
 CONFIG_ARCH_VULCAN=y
 CONFIG_ARCH_XGENE=y
+CONFIG_ARCH_ZX=y
 CONFIG_ARCH_ZYNQMP=y
 CONFIG_PCI=y
 CONFIG_PCI_MSI=y
 CONFIG_PCI_IOV=y
+CONFIG_PCI_AARDVARK=y
 CONFIG_PCIE_RCAR=y
 CONFIG_PCI_HOST_GENERIC=y
 CONFIG_PCI_XGENE=y
@@ -82,6 +84,7 @@
 CONFIG_CPU_IDLE=y
 CONFIG_ARM_CPUIDLE=y
 CONFIG_CPU_FREQ=y
+CONFIG_CPUFREQ_DT=y
 CONFIG_ARM_BIG_LITTLE_CPUFREQ=y
 CONFIG_ARM_SCPI_CPUFREQ=y
 CONFIG_NET=y
@@ -120,6 +123,14 @@
 CONFIG_VLAN_8021Q_GVRP=y
 CONFIG_VLAN_8021Q_MVRP=y
 CONFIG_BPF_JIT=y
+CONFIG_BT=m
+CONFIG_BT_HIDP=m
+# CONFIG_BT_HS is not set
+# CONFIG_BT_LE is not set
+CONFIG_BT_LEDS=y
+# CONFIG_BT_DEBUGFS is not set
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_LL=y
 CONFIG_CFG80211=m
 CONFIG_MAC80211=m
 CONFIG_MAC80211_LEDS=y
@@ -139,7 +150,8 @@
 CONFIG_SRAM=y
 # CONFIG_SCSI_PROC_FS is not set
 CONFIG_BLK_DEV_SD=y
-# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_SCSI_SAS_ATA=y
+CONFIG_SCSI_HISI_SAS=y
 CONFIG_ATA=y
 CONFIG_SATA_AHCI=y
 CONFIG_SATA_AHCI_PLATFORM=y
@@ -160,6 +172,8 @@
 CONFIG_AMD_XGBE=y
 CONFIG_NET_XGENE=y
 CONFIG_MACB=y
+CONFIG_HNS_DSAF=y
+CONFIG_HNS_ENET=y
 CONFIG_E1000E=y
 CONFIG_IGB=y
 CONFIG_IGBVF=y
@@ -186,6 +200,7 @@
 CONFIG_KEYBOARD_GPIO=y
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_PM8941_PWRKEY=y
+CONFIG_INPUT_HISI_POWERKEY=y
 # CONFIG_SERIO_SERPORT is not set
 CONFIG_SERIO_AMBAKMI=y
 CONFIG_LEGACY_PTY_COUNT=16
@@ -211,12 +226,12 @@
 CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
 CONFIG_SERIAL_MVEBU_UART=y
 CONFIG_VIRTIO_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_MUX=y
 CONFIG_I2C_MUX_PCA954x=y
 CONFIG_I2C_DESIGNWARE_PLATFORM=y
 CONFIG_I2C_IMX=y
+CONFIG_I2C_MESON=y
 CONFIG_I2C_MV64XXX=y
 CONFIG_I2C_QUP=y
 CONFIG_I2C_TEGRA=y
@@ -224,6 +239,7 @@
 CONFIG_I2C_RCAR=y
 CONFIG_I2C_CROS_EC_TUNNEL=y
 CONFIG_SPI=y
+CONFIG_SPI_MESON_SPIFC=m
 CONFIG_SPI_ORION=y
 CONFIG_SPI_PL022=y
 CONFIG_SPI_QUP=y
@@ -234,6 +250,7 @@
 CONFIG_PINCTRL_MAX77620=y
 CONFIG_PINCTRL_MSM8916=y
 CONFIG_PINCTRL_MSM8996=y
+CONFIG_PINCTRL_QDF2XXX=y
 CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_DWAPB=y
@@ -252,10 +269,14 @@
 CONFIG_SENSORS_ARM_SCPI=y
 CONFIG_THERMAL=y
 CONFIG_THERMAL_EMULATION=y
+CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
+CONFIG_CPU_THERMAL=y
 CONFIG_EXYNOS_THERMAL=y
 CONFIG_WATCHDOG=y
 CONFIG_RENESAS_WDT=y
 CONFIG_S3C2410_WATCHDOG=y
+CONFIG_MESON_GXBB_WATCHDOG=m
+CONFIG_MESON_WATCHDOG=m
 CONFIG_MFD_MAX77620=y
 CONFIG_MFD_SPMI_PMIC=y
 CONFIG_MFD_SEC_CORE=y
@@ -264,6 +285,7 @@
 CONFIG_MFD_CROS_EC=y
 CONFIG_MFD_CROS_EC_I2C=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_GPIO=y
 CONFIG_REGULATOR_HI655X=y
 CONFIG_REGULATOR_MAX77620=y
 CONFIG_REGULATOR_PWM=y
@@ -274,6 +296,8 @@
 CONFIG_DRM_NOUVEAU=m
 CONFIG_DRM_TEGRA=m
 CONFIG_DRM_PANEL_SIMPLE=m
+CONFIG_DRM_I2C_ADV7511=m
+CONFIG_DRM_HISI_KIRIN=m
 CONFIG_FB=y
 CONFIG_FB_ARMCLCD=y
 CONFIG_BACKLIGHT_GENERIC=m
@@ -291,6 +315,7 @@
 CONFIG_USB=y
 CONFIG_USB_OTG=y
 CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_PLATFORM=y
 CONFIG_USB_XHCI_RCAR=y
 CONFIG_USB_EHCI_EXYNOS=y
 CONFIG_USB_XHCI_TEGRA=y
@@ -300,6 +325,7 @@
 CONFIG_USB_OHCI_EXYNOS=y
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PLATFORM=y
+CONFIG_USB_RENESAS_USBHS=m
 CONFIG_USB_STORAGE=y
 CONFIG_USB_DWC2=y
 CONFIG_USB_DWC3=y
@@ -311,15 +337,18 @@
 CONFIG_USB_MSM_OTG=y
 CONFIG_USB_ULPI=y
 CONFIG_USB_GADGET=y
+CONFIG_USB_RENESAS_USBHS_UDC=m
 CONFIG_MMC=y
 CONFIG_MMC_BLOCK_MINORS=32
 CONFIG_MMC_ARMMMCI=y
 CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_ACPI=y
 CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_SDHCI_OF_ESDHC=y
 CONFIG_MMC_SDHCI_TEGRA=y
 CONFIG_MMC_SDHCI_MSM=y
 CONFIG_MMC_SPI=y
+CONFIG_MMC_SDHI=y
 CONFIG_MMC_DW=y
 CONFIG_MMC_DW_EXYNOS=y
 CONFIG_MMC_DW_K3=y
@@ -345,6 +374,8 @@
 CONFIG_PL330_DMA=y
 CONFIG_TEGRA20_APB_DMA=y
 CONFIG_QCOM_BAM_DMA=y
+CONFIG_QCOM_HIDMA_MGMT=y
+CONFIG_QCOM_HIDMA=y
 CONFIG_RCAR_DMAC=y
 CONFIG_VFIO=y
 CONFIG_VFIO_PCI=y
diff --git a/arch/avr32/kernel/traps.c b/arch/avr32/kernel/traps.c
index 682b247..eb4a3fc 100644
--- a/arch/avr32/kernel/traps.c
+++ b/arch/avr32/kernel/traps.c
@@ -11,7 +11,8 @@
 #include <linux/init.h>
 #include <linux/kallsyms.h>
 #include <linux/kdebug.h>
-#include <linux/module.h>
+#include <linux/extable.h>
+#include <linux/module.h>	/* print_modules */
 #include <linux/notifier.h>
 #include <linux/sched.h>
 #include <linux/uaccess.h>
diff --git a/arch/avr32/mm/fault.c b/arch/avr32/mm/fault.c
index a4b7eda..b3977e9 100644
--- a/arch/avr32/mm/fault.c
+++ b/arch/avr32/mm/fault.c
@@ -10,7 +10,7 @@
  */
 
 #include <linux/mm.h>
-#include <linux/module.h>
+#include <linux/extable.h>
 #include <linux/pagemap.h>
 #include <linux/kdebug.h>
 #include <linux/kprobes.h>
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index 8a96bdc..71c4a3a 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -10,11 +10,12 @@
 	select RTC_CLASS
 	select RTC_DRV_GENERIC
 	select INIT_ALL_POSSIBLE
+	select HAVE_MEMBLOCK
+	select NO_BOOTMEM
 	select BUG
 	select BUILDTIME_EXTABLE_SORT
 	select HAVE_PERF_EVENTS
 	select GENERIC_ATOMIC64 if !64BIT
-	select BROKEN_RODATA
 	select GENERIC_IRQ_PROBE
 	select GENERIC_PCI_IOMAP
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG
@@ -23,6 +24,7 @@
 	select SYSCTL_ARCH_UNALIGN_ALLOW
 	select SYSCTL_EXCEPTION_TRACE
 	select HAVE_MOD_ARCH_SPECIFIC
+	select HAVE_ARCH_HARDENED_USERCOPY
 	select VIRT_TO_BUS
 	select MODULES_USE_ELF_RELA
 	select CLONE_BACKWARDS
diff --git a/arch/parisc/include/asm/dwarf.h b/arch/parisc/include/asm/dwarf.h
new file mode 100644
index 0000000..8fe7d6b
--- /dev/null
+++ b/arch/parisc/include/asm/dwarf.h
@@ -0,0 +1,23 @@
+/*
+ * Copyright (C) 2016 Helge Deller <deller@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _ASM_PARISC_DWARF_H
+#define _ASM_PARISC_DWARF_H
+
+#ifdef __ASSEMBLY__
+
+#define CFI_STARTPROC	.cfi_startproc
+#define CFI_ENDPROC	.cfi_endproc
+#define CFI_DEF_CFA	.cfi_def_cfa
+#define CFI_REGISTER	.cfi_register
+#define CFI_REL_OFFSET	.cfi_rel_offset
+#define CFI_UNDEFINED	.cfi_undefined
+
+#endif	/* __ASSEMBLY__ */
+
+#endif	/* _ASM_PARISC_DWARF_H */
diff --git a/arch/parisc/include/asm/linkage.h b/arch/parisc/include/asm/linkage.h
index 0b19a72..67e6b43 100644
--- a/arch/parisc/include/asm/linkage.h
+++ b/arch/parisc/include/asm/linkage.h
@@ -1,6 +1,8 @@
 #ifndef __ASM_PARISC_LINKAGE_H
 #define __ASM_PARISC_LINKAGE_H
 
+#include <asm/dwarf.h>
+
 #ifndef __ALIGN
 #define __ALIGN         .align 4
 #define __ALIGN_STR     ".align 4"
@@ -10,6 +12,8 @@
  * In parisc assembly a semicolon marks a comment while a
  * exclamation mark is used to separate independent lines.
  */
+#define ASM_NL	!
+
 #ifdef __ASSEMBLY__
 
 #define ENTRY(name) \
@@ -26,6 +30,14 @@
 	END(name)
 #endif
 
+#define ENTRY_CFI(name) \
+	ENTRY(name)	ASM_NL\
+	CFI_STARTPROC
+
+#define ENDPROC_CFI(name) \
+	ENDPROC(name)	ASM_NL\
+	CFI_ENDPROC
+
 #endif /* __ASSEMBLY__ */
 
 #endif  /* __ASM_PARISC_LINKAGE_H */
diff --git a/arch/parisc/include/asm/pgtable.h b/arch/parisc/include/asm/pgtable.h
index 291cee2..e44bdb9 100644
--- a/arch/parisc/include/asm/pgtable.h
+++ b/arch/parisc/include/asm/pgtable.h
@@ -83,7 +83,7 @@
 	printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, (unsigned long)pgd_val(e))
 
 /* This is the size of the initially mapped kernel memory */
-#ifdef CONFIG_64BIT
+#if defined(CONFIG_64BIT) || defined(CONFIG_SMP)
 #define KERNEL_INITIAL_ORDER	25	/* 1<<25 = 32MB */
 #else
 #define KERNEL_INITIAL_ORDER	24	/* 1<<24 = 16MB */
diff --git a/arch/parisc/include/asm/uaccess.h b/arch/parisc/include/asm/uaccess.h
index 4828478..9a2aee1 100644
--- a/arch/parisc/include/asm/uaccess.h
+++ b/arch/parisc/include/asm/uaccess.h
@@ -11,6 +11,7 @@
 
 #include <linux/bug.h>
 #include <linux/string.h>
+#include <linux/thread_info.h>
 
 #define VERIFY_READ 0
 #define VERIFY_WRITE 1
@@ -201,10 +202,12 @@
 #define clear_user lclear_user
 #define __clear_user lclear_user
 
-unsigned long copy_to_user(void __user *dst, const void *src, unsigned long len);
-#define __copy_to_user copy_to_user
-unsigned long __copy_from_user(void *dst, const void __user *src, unsigned long len);
-unsigned long copy_in_user(void __user *dst, const void __user *src, unsigned long len);
+unsigned long __must_check __copy_to_user(void __user *dst, const void *src,
+					  unsigned long len);
+unsigned long __must_check __copy_from_user(void *dst, const void __user *src,
+					  unsigned long len);
+unsigned long copy_in_user(void __user *dst, const void __user *src,
+			   unsigned long len);
 #define __copy_in_user copy_in_user
 #define __copy_to_user_inatomic __copy_to_user
 #define __copy_from_user_inatomic __copy_from_user
@@ -217,23 +220,40 @@
 	WARN(1, "Buffer overflow detected (%d < %lu)!\n", size, count);
 }
 
-static inline unsigned long __must_check copy_from_user(void *to,
-                                          const void __user *from,
-                                          unsigned long n)
+static __always_inline unsigned long __must_check
+copy_from_user(void *to, const void __user *from, unsigned long n)
 {
-        int sz = __compiletime_object_size(to);
-        unsigned long ret = n;
+	int sz = __compiletime_object_size(to);
+	unsigned long ret = n;
 
-        if (likely(sz == -1 || sz >= n))
-                ret = __copy_from_user(to, from, n);
-        else if (!__builtin_constant_p(n))
+	if (likely(sz < 0 || sz >= n)) {
+		check_object_size(to, n, false);
+		ret = __copy_from_user(to, from, n);
+	} else if (!__builtin_constant_p(n))
 		copy_user_overflow(sz, n);
 	else
-                __bad_copy_user();
+		__bad_copy_user();
 
 	if (unlikely(ret))
 		memset(to + (n - ret), 0, ret);
-        return ret;
+
+	return ret;
+}
+
+static __always_inline unsigned long __must_check
+copy_to_user(void __user *to, const void *from, unsigned long n)
+{
+	int sz = __compiletime_object_size(from);
+
+	if (likely(sz < 0 || sz >= n)) {
+		check_object_size(from, n, true);
+		n = __copy_to_user(to, from, n);
+	} else if (!__builtin_constant_p(n))
+		copy_user_overflow(sz, n);
+	else
+		__bad_copy_user();
+
+	return n;
 }
 
 struct pt_regs;
diff --git a/arch/parisc/kernel/entry.S b/arch/parisc/kernel/entry.S
index baa3d9d..4fcff2d 100644
--- a/arch/parisc/kernel/entry.S
+++ b/arch/parisc/kernel/entry.S
@@ -766,7 +766,7 @@
 	 * copy_thread moved args into task save area.
 	 */
 
-ENTRY(ret_from_kernel_thread)
+ENTRY_CFI(ret_from_kernel_thread)
 
 	/* Call schedule_tail first though */
 	BL	schedule_tail, %r2
@@ -782,7 +782,7 @@
 	copy	%r31, %r2
 	b	finish_child_return
 	nop
-ENDPROC(ret_from_kernel_thread)
+ENDPROC_CFI(ret_from_kernel_thread)
 
 
 	/*
@@ -790,7 +790,7 @@
 	 *	struct task_struct *next)
 	 *
 	 * switch kernel stacks and return prev */
-ENTRY(_switch_to)
+ENTRY_CFI(_switch_to)
 	STREG	 %r2, -RP_OFFSET(%r30)
 
 	callee_save_float
@@ -815,7 +815,7 @@
 	LDREG	-RP_OFFSET(%r30), %r2
 	bv	%r0(%r2)
 	copy	%r26, %r28
-ENDPROC(_switch_to)
+ENDPROC_CFI(_switch_to)
 
 	/*
 	 * Common rfi return path for interruptions, kernel execve, and
@@ -833,7 +833,7 @@
 
 	.align	PAGE_SIZE
 
-ENTRY(syscall_exit_rfi)
+ENTRY_CFI(syscall_exit_rfi)
 	mfctl   %cr30,%r16
 	LDREG	TI_TASK(%r16), %r16	/* thread_info -> task_struct */
 	ldo	TASK_REGS(%r16),%r16
@@ -1037,12 +1037,12 @@
 
 	b	do_cpu_irq_mask
 	ldo	R%intr_return(%r2), %r2	/* return to intr_return, not here */
-ENDPROC(syscall_exit_rfi)
+ENDPROC_CFI(syscall_exit_rfi)
 
 
 	/* Generic interruptions (illegal insn, unaligned, page fault, etc) */
 
-ENTRY(intr_save)		/* for os_hpmc */
+ENTRY_CFI(intr_save)		/* for os_hpmc */
 	mfsp    %sr7,%r16
 	cmpib,COND(=),n 0,%r16,1f
 	get_stack_use_cr30
@@ -1117,7 +1117,7 @@
 
 	b		handle_interruption
 	ldo		R%intr_check_sig(%r2), %r2
-ENDPROC(intr_save)
+ENDPROC_CFI(intr_save)
 
 
 	/*
@@ -1720,7 +1720,7 @@
 	.endm
 
 	.macro	fork_like name
-ENTRY(sys_\name\()_wrapper)
+ENTRY_CFI(sys_\name\()_wrapper)
 	LDREG	TI_TASK-THREAD_SZ_ALGN-FRAME_SIZE(%r30), %r1
 	ldo	TASK_REGS(%r1),%r1
 	reg_save %r1
@@ -1728,7 +1728,7 @@
 	ldil	L%sys_\name, %r31
 	be	R%sys_\name(%sr4,%r31)
 	STREG	%r28, PT_CR27(%r1)
-ENDPROC(sys_\name\()_wrapper)
+ENDPROC_CFI(sys_\name\()_wrapper)
 	.endm
 
 fork_like clone
@@ -1736,7 +1736,7 @@
 fork_like vfork
 
 	/* Set the return value for the child */
-ENTRY(child_return)
+ENTRY_CFI(child_return)
 	BL	schedule_tail, %r2
 	nop
 finish_child_return:
@@ -1748,9 +1748,9 @@
 	reg_restore %r1
 	b	syscall_exit
 	copy	%r0,%r28
-ENDPROC(child_return)
+ENDPROC_CFI(child_return)
 
-ENTRY(sys_rt_sigreturn_wrapper)
+ENTRY_CFI(sys_rt_sigreturn_wrapper)
 	LDREG	TI_TASK-THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r26
 	ldo	TASK_REGS(%r26),%r26	/* get pt regs */
 	/* Don't save regs, we are going to restore them from sigcontext. */
@@ -1778,9 +1778,9 @@
 	 */
 	bv	%r0(%r2)
 	LDREG	PT_GR28(%r1),%r28  /* reload original r28 for syscall_exit */
-ENDPROC(sys_rt_sigreturn_wrapper)
+ENDPROC_CFI(sys_rt_sigreturn_wrapper)
 
-ENTRY(syscall_exit)
+ENTRY_CFI(syscall_exit)
 	/* NOTE: Not all syscalls exit this way.  rt_sigreturn will exit
 	 * via syscall_exit_rfi if the signal was received while the process
 	 * was running.
@@ -1979,7 +1979,7 @@
 #else
 	nop
 #endif
-ENDPROC(syscall_exit)
+ENDPROC_CFI(syscall_exit)
 
 
 #ifdef CONFIG_FUNCTION_TRACER
@@ -2023,7 +2023,7 @@
 	.align 8
 	.globl return_to_handler
 	.type  return_to_handler, @function
-ENTRY(return_to_handler)
+ENTRY_CFI(return_to_handler)
 	.proc
 	.callinfo caller,frame=FRAME_SIZE
 	.entry
@@ -2067,7 +2067,7 @@
 	LDREGM -FRAME_SIZE(%sp),%r3
 	.exit
 	.procend
-ENDPROC(return_to_handler)
+ENDPROC_CFI(return_to_handler)
 
 #endif /* CONFIG_FUNCTION_GRAPH_TRACER */
 
@@ -2076,7 +2076,7 @@
 #ifdef CONFIG_IRQSTACKS
 /* void call_on_stack(unsigned long param1, void *func,
 		      unsigned long new_stack) */
-ENTRY(call_on_stack)
+ENTRY_CFI(call_on_stack)
 	copy	%sp, %r1
 
 	/* Regarding the HPPA calling conventions for function pointers,
@@ -2112,10 +2112,10 @@
 	bv	(%rp)
 	LDREG	-68(%sp), %sp
 # endif /* CONFIG_64BIT */
-ENDPROC(call_on_stack)
+ENDPROC_CFI(call_on_stack)
 #endif /* CONFIG_IRQSTACKS */
 
-get_register:
+ENTRY_CFI(get_register)
 	/*
 	 * get_register is used by the non access tlb miss handlers to
 	 * copy the value of the general register specified in r8 into
@@ -2192,9 +2192,10 @@
 	copy    %r30,%r1
 	bv      %r0(%r25)    /* r31 */
 	copy    %r31,%r1
+ENDPROC_CFI(get_register)
 
 
-set_register:
+ENTRY_CFI(set_register)
 	/*
 	 * set_register is used by the non access tlb miss handlers to
 	 * copy the value of r1 into the general register specified in
@@ -2266,4 +2267,5 @@
 	copy    %r1,%r30
 	bv      %r0(%r25)    /* r31 */
 	copy    %r1,%r31
+ENDPROC_CFI(set_register)
 
diff --git a/arch/parisc/kernel/hpmc.S b/arch/parisc/kernel/hpmc.S
index e158b6f..0fbd0a0 100644
--- a/arch/parisc/kernel/hpmc.S
+++ b/arch/parisc/kernel/hpmc.S
@@ -41,12 +41,12 @@
  */
 
 	.level		1.1
-	.data
 
 #include <asm/assembly.h>
 #include <asm/pdc.h>
 
 #include <linux/linkage.h>
+#include <linux/init.h>
 
 	/*
 	 * stack for os_hpmc, the HPMC handler.
@@ -55,22 +55,26 @@
 	 * IODC requires 7K byte stack.  That leaves 1K byte for os_hpmc.
 	 */
 
+	__PAGE_ALIGNED_BSS
 	.align 4096
 hpmc_stack:
 	.block 16384
 
 #define HPMC_IODC_BUF_SIZE 0x8000
 
+	__PAGE_ALIGNED_BSS
 	.align 4096
 hpmc_iodc_buf:
 	.block HPMC_IODC_BUF_SIZE
 
+	.section .bss
 	.align 8
 hpmc_raddr:
 	.block 128
 
 #define HPMC_PIM_DATA_SIZE 896 /* Enough to hold all architected 2.0 state */
 
+	.section .bss
 	.align 8
 ENTRY(hpmc_pim_data)
 	.block HPMC_PIM_DATA_SIZE
@@ -79,7 +83,7 @@
 	.text
 
 	.import intr_save, code
-ENTRY(os_hpmc)
+ENTRY_CFI(os_hpmc)
 .os_hpmc:
 
 	/*
@@ -295,11 +299,11 @@
 
 	b .
 	nop
-ENDPROC(os_hpmc)
+ENDPROC_CFI(os_hpmc)
 .os_hpmc_end:
-	nop
-.data
-.align 4
+
+
+	__INITRODATA
 	.export os_hpmc_size
 os_hpmc_size:
 	.word .os_hpmc_end-.os_hpmc
diff --git a/arch/parisc/kernel/inventory.c b/arch/parisc/kernel/inventory.c
index f0b6722..545f9d2 100644
--- a/arch/parisc/kernel/inventory.c
+++ b/arch/parisc/kernel/inventory.c
@@ -506,7 +506,7 @@
 	long status;
 	struct pdc_system_map_addr_info addr_result;
 
-	dev->addr = kmalloc(num_addrs * sizeof(unsigned long), GFP_KERNEL);
+	dev->addr = kmalloc_array(num_addrs, sizeof(*dev->addr), GFP_KERNEL);
 	if(!dev->addr) {
 		printk(KERN_ERR "%s %s(): memory allocation failure\n",
 		       __FILE__, __func__);
diff --git a/arch/parisc/kernel/pacache.S b/arch/parisc/kernel/pacache.S
index b743a80..985e06d 100644
--- a/arch/parisc/kernel/pacache.S
+++ b/arch/parisc/kernel/pacache.S
@@ -41,7 +41,7 @@
 	.text
 	.align	128
 
-ENTRY(flush_tlb_all_local)
+ENTRY_CFI(flush_tlb_all_local)
 	.proc
 	.callinfo NO_CALLS
 	.entry
@@ -190,11 +190,11 @@
 
 	.exit
 	.procend
-ENDPROC(flush_tlb_all_local)
+ENDPROC_CFI(flush_tlb_all_local)
 
 	.import cache_info,data
 
-ENTRY(flush_instruction_cache_local)
+ENTRY_CFI(flush_instruction_cache_local)
 	.proc
 	.callinfo NO_CALLS
 	.entry
@@ -257,11 +257,11 @@
 	.exit
 
 	.procend
-ENDPROC(flush_instruction_cache_local)
+ENDPROC_CFI(flush_instruction_cache_local)
 
 
 	.import cache_info, data
-ENTRY(flush_data_cache_local)
+ENTRY_CFI(flush_data_cache_local)
 	.proc
 	.callinfo NO_CALLS
 	.entry
@@ -325,7 +325,7 @@
 	.exit
 
 	.procend
-ENDPROC(flush_data_cache_local)
+ENDPROC_CFI(flush_data_cache_local)
 
 	.align	16
 
@@ -356,7 +356,7 @@
 
 /* Clear page using kernel mapping.  */
 
-ENTRY(clear_page_asm)
+ENTRY_CFI(clear_page_asm)
 	.proc
 	.callinfo NO_CALLS
 	.entry
@@ -422,11 +422,11 @@
 	.exit
 
 	.procend
-ENDPROC(clear_page_asm)
+ENDPROC_CFI(clear_page_asm)
 
 /* Copy page using kernel mapping.  */
 
-ENTRY(copy_page_asm)
+ENTRY_CFI(copy_page_asm)
 	.proc
 	.callinfo NO_CALLS
 	.entry
@@ -540,7 +540,7 @@
 	.exit
 
 	.procend
-ENDPROC(copy_page_asm)
+ENDPROC_CFI(copy_page_asm)
 
 /*
  * NOTE: Code in clear_user_page has a hard coded dependency on the
@@ -573,11 +573,17 @@
 	.endm
 
 	/*
-	 * We can't do this since copy_user_page is used to bring in
-	 * file data that might have instructions. Since the data would
-	 * then need to be flushed out so the i-fetch can see it, it
-	 * makes more sense to just copy through the kernel translation
-	 * and flush it.
+	 * copy_user_page_asm() performs a page copy using mappings
+	 * equivalent to the user page mappings.  It can be used to
+	 * implement copy_user_page() but unfortunately both the `from'
+	 * and `to' pages need to be flushed through mappings equivalent
+	 * to the user mappings after the copy because the kernel accesses
+	 * the `from' page through the kmap kernel mapping and the `to'
+	 * page needs to be flushed since code can be copied.  As a
+	 * result, this implementation is less efficient than the simpler
+	 * copy using the kernel mapping.  It only needs the `from' page
+	 * to flushed via the user mapping.  The kunmap routines handle
+	 * the flushes needed for the kernel mapping.
 	 *
 	 * I'm still keeping this around because it may be possible to
 	 * use it if more information is passed into copy_user_page().
@@ -586,7 +592,7 @@
 	 *
 	 */
 
-ENTRY(copy_user_page_asm)
+ENTRY_CFI(copy_user_page_asm)
 	.proc
 	.callinfo NO_CALLS
 	.entry
@@ -742,9 +748,9 @@
 	.exit
 
 	.procend
-ENDPROC(copy_user_page_asm)
+ENDPROC_CFI(copy_user_page_asm)
 
-ENTRY(clear_user_page_asm)
+ENTRY_CFI(clear_user_page_asm)
 	.proc
 	.callinfo NO_CALLS
 	.entry
@@ -828,9 +834,9 @@
 	.exit
 
 	.procend
-ENDPROC(clear_user_page_asm)
+ENDPROC_CFI(clear_user_page_asm)
 
-ENTRY(flush_dcache_page_asm)
+ENTRY_CFI(flush_dcache_page_asm)
 	.proc
 	.callinfo NO_CALLS
 	.entry
@@ -904,9 +910,9 @@
 	.exit
 
 	.procend
-ENDPROC(flush_dcache_page_asm)
+ENDPROC_CFI(flush_dcache_page_asm)
 
-ENTRY(flush_icache_page_asm)
+ENTRY_CFI(flush_icache_page_asm)
 	.proc
 	.callinfo NO_CALLS
 	.entry
@@ -982,9 +988,9 @@
 	.exit
 
 	.procend
-ENDPROC(flush_icache_page_asm)
+ENDPROC_CFI(flush_icache_page_asm)
 
-ENTRY(flush_kernel_dcache_page_asm)
+ENTRY_CFI(flush_kernel_dcache_page_asm)
 	.proc
 	.callinfo NO_CALLS
 	.entry
@@ -1025,9 +1031,9 @@
 	.exit
 
 	.procend
-ENDPROC(flush_kernel_dcache_page_asm)
+ENDPROC_CFI(flush_kernel_dcache_page_asm)
 
-ENTRY(purge_kernel_dcache_page_asm)
+ENTRY_CFI(purge_kernel_dcache_page_asm)
 	.proc
 	.callinfo NO_CALLS
 	.entry
@@ -1067,9 +1073,9 @@
 	.exit
 
 	.procend
-ENDPROC(purge_kernel_dcache_page_asm)
+ENDPROC_CFI(purge_kernel_dcache_page_asm)
 
-ENTRY(flush_user_dcache_range_asm)
+ENTRY_CFI(flush_user_dcache_range_asm)
 	.proc
 	.callinfo NO_CALLS
 	.entry
@@ -1088,9 +1094,9 @@
 	.exit
 
 	.procend
-ENDPROC(flush_user_dcache_range_asm)
+ENDPROC_CFI(flush_user_dcache_range_asm)
 
-ENTRY(flush_kernel_dcache_range_asm)
+ENTRY_CFI(flush_kernel_dcache_range_asm)
 	.proc
 	.callinfo NO_CALLS
 	.entry
@@ -1110,9 +1116,9 @@
 	.exit
 
 	.procend
-ENDPROC(flush_kernel_dcache_range_asm)
+ENDPROC_CFI(flush_kernel_dcache_range_asm)
 
-ENTRY(flush_user_icache_range_asm)
+ENTRY_CFI(flush_user_icache_range_asm)
 	.proc
 	.callinfo NO_CALLS
 	.entry
@@ -1131,9 +1137,9 @@
 	.exit
 
 	.procend
-ENDPROC(flush_user_icache_range_asm)
+ENDPROC_CFI(flush_user_icache_range_asm)
 
-ENTRY(flush_kernel_icache_page)
+ENTRY_CFI(flush_kernel_icache_page)
 	.proc
 	.callinfo NO_CALLS
 	.entry
@@ -1174,9 +1180,9 @@
 	.exit
 
 	.procend
-ENDPROC(flush_kernel_icache_page)
+ENDPROC_CFI(flush_kernel_icache_page)
 
-ENTRY(flush_kernel_icache_range_asm)
+ENTRY_CFI(flush_kernel_icache_range_asm)
 	.proc
 	.callinfo NO_CALLS
 	.entry
@@ -1194,13 +1200,13 @@
 	nop
 	.exit
 	.procend
-ENDPROC(flush_kernel_icache_range_asm)
+ENDPROC_CFI(flush_kernel_icache_range_asm)
 
 	/* align should cover use of rfi in disable_sr_hashing_asm and
 	 * srdis_done.
 	 */
 	.align	256
-ENTRY(disable_sr_hashing_asm)
+ENTRY_CFI(disable_sr_hashing_asm)
 	.proc
 	.callinfo NO_CALLS
 	.entry
@@ -1289,6 +1295,6 @@
 	.exit
 
 	.procend
-ENDPROC(disable_sr_hashing_asm)
+ENDPROC_CFI(disable_sr_hashing_asm)
 
 	.end
diff --git a/arch/parisc/kernel/real2.S b/arch/parisc/kernel/real2.S
index 5f3d3a1..1db58e5 100644
--- a/arch/parisc/kernel/real2.S
+++ b/arch/parisc/kernel/real2.S
@@ -61,7 +61,7 @@
 	 *	iodc_fn is the IODC function to call
 	 */
 
-ENTRY(real32_call_asm)
+ENTRY_CFI(real32_call_asm)
 	STREG	%rp, -RP_OFFSET(%sp)	/* save RP */
 #ifdef CONFIG_64BIT
 	callee_save
@@ -119,14 +119,14 @@
 	LDREG	-RP_OFFSET(%sp), %rp	/* restore RP */
 	bv	0(%rp)
 	nop
-ENDPROC(real32_call_asm)
+ENDPROC_CFI(real32_call_asm)
 
 
 #  define PUSH_CR(r, where) mfctl r, %r1 ! STREG,ma %r1, REG_SZ(where)
 #  define POP_CR(r, where) LDREG,mb -REG_SZ(where), %r1 ! mtctl %r1, r
 
 	.text
-save_control_regs:
+ENTRY_CFI(save_control_regs)
 	load32	PA(save_cr_space), %r28
 	PUSH_CR(%cr24, %r28)
 	PUSH_CR(%cr25, %r28)
@@ -139,8 +139,9 @@
 	PUSH_CR(%cr15, %r28)
 	bv 0(%r2)
 	nop
+ENDPROC_CFI(save_control_regs)
 
-restore_control_regs:
+ENTRY_CFI(restore_control_regs)
 	load32	PA(save_cr_end), %r26
 	POP_CR(%cr15, %r26)
 	POP_CR(%cr31, %r26)
@@ -153,13 +154,14 @@
 	POP_CR(%cr24, %r26)
 	bv 0(%r2)
 	nop
+ENDPROC_CFI(restore_control_regs)
 
 /* rfi_virt2real() and rfi_real2virt() could perhaps be adapted for
  * more general-purpose use by the several places which need RFIs
  */
 	.text
 	.align 128
-rfi_virt2real:
+ENTRY_CFI(rfi_virt2real)
 	/* switch to real mode... */
 	rsm		PSW_SM_I,%r0
 	load32		PA(rfi_v2r_1), %r1
@@ -191,10 +193,11 @@
 	tophys_r1 %r2
 	bv	0(%r2)
 	nop
+ENDPROC_CFI(rfi_virt2real)
 
 	.text
 	.align 128
-rfi_real2virt:
+ENTRY_CFI(rfi_real2virt)
 	rsm		PSW_SM_I,%r0
 	load32		(rfi_r2v_1), %r1
 	nop
@@ -225,6 +228,7 @@
 	tovirt_r1 %r2
 	bv	0(%r2)
 	nop
+ENDPROC_CFI(rfi_real2virt)
 
 #ifdef CONFIG_64BIT
 
@@ -238,7 +242,7 @@
 	 *	arg0p points to where saved arg values may be found
 	 *	iodc_fn is the IODC function to call
 	 */
-ENTRY(real64_call_asm)
+ENTRY_CFI(real64_call_asm)
 	std	%rp, -0x10(%sp)		/* save RP */
 	std	%sp, -8(%arg0)		/* save SP on real-mode stack */
 	copy	%arg0, %sp		/* adopt the real-mode SP */
@@ -284,7 +288,7 @@
 	ldd	-0x10(%sp), %rp		/* restore RP */
 	bv	0(%rp)
 	nop
-ENDPROC(real64_call_asm)
+ENDPROC_CFI(real64_call_asm)
 
 #endif
 
@@ -293,12 +297,12 @@
 	**	GCC 3.3 and later has a new function in libgcc.a for
 	**	comparing function pointers.
 	*/
-ENTRY(__canonicalize_funcptr_for_compare)
+ENTRY_CFI(__canonicalize_funcptr_for_compare)
 #ifdef CONFIG_64BIT
 	bve (%r2)
 #else
 	bv %r0(%r2)
 #endif
 	copy %r26,%r28
-ENDPROC(__canonicalize_funcptr_for_compare)
+ENDPROC_CFI(__canonicalize_funcptr_for_compare)
 
diff --git a/arch/parisc/kernel/setup.c b/arch/parisc/kernel/setup.c
index f7ea626..81d6f63 100644
--- a/arch/parisc/kernel/setup.c
+++ b/arch/parisc/kernel/setup.c
@@ -38,6 +38,7 @@
 #include <linux/export.h>
 
 #include <asm/processor.h>
+#include <asm/sections.h>
 #include <asm/pdc.h>
 #include <asm/led.h>
 #include <asm/machdep.h>	/* for pa7300lc_init() proto */
@@ -140,6 +141,13 @@
 #endif
 	printk(KERN_CONT ".\n");
 
+	/*
+	 * Check if initial kernel page mappings are sufficient.
+	 * panic early if not, else we may access kernel functions
+	 * and variables which can't be reached.
+	 */
+	if (__pa((unsigned long) &_end) >= KERNEL_INITIAL_SIZE)
+		panic("KERNEL_INITIAL_ORDER too small!");
 
 	pdc_console_init();
 
diff --git a/arch/parisc/kernel/smp.c b/arch/parisc/kernel/smp.c
index c2a9cc5..75dab28 100644
--- a/arch/parisc/kernel/smp.c
+++ b/arch/parisc/kernel/smp.c
@@ -412,8 +412,8 @@
 
 int __cpu_up(unsigned int cpu, struct task_struct *tidle)
 {
-	if (cpu != 0 && cpu < parisc_max_cpus)
-		smp_boot_one_cpu(cpu, tidle);
+	if (cpu != 0 && cpu < parisc_max_cpus && smp_boot_one_cpu(cpu, tidle))
+		return -ENOSYS;
 
 	return cpu_online(cpu) ? 0 : -ENOSYS;
 }
diff --git a/arch/parisc/kernel/time.c b/arch/parisc/kernel/time.c
index 4b0b963..9b63b87 100644
--- a/arch/parisc/kernel/time.c
+++ b/arch/parisc/kernel/time.c
@@ -226,12 +226,6 @@
 	unsigned int cpu = smp_processor_id();
 	unsigned long next_tick = mfctl(16) + clocktick;
 
-#if defined(CONFIG_HAVE_UNSTABLE_SCHED_CLOCK) && defined(CONFIG_64BIT)
-	/* With multiple 64bit CPUs online, the cr16's are not syncronized. */
-	if (cpu != 0)
-		clear_sched_clock_stable();
-#endif
-
 	mtctl(next_tick, 16);		/* kick off Interval Timer (CR16) */
 
 	per_cpu(cpu_data, cpu).it_value = next_tick;
diff --git a/arch/parisc/kernel/vmlinux.lds.S b/arch/parisc/kernel/vmlinux.lds.S
index 9ec8ec0..b37787d 100644
--- a/arch/parisc/kernel/vmlinux.lds.S
+++ b/arch/parisc/kernel/vmlinux.lds.S
@@ -139,8 +139,6 @@
 	/* BSS */
 	BSS_SECTION(PAGE_SIZE, PAGE_SIZE, PAGE_SIZE)
 
-	/* bootmap is allocated in setup_bootmem() directly behind bss. */
-
 	. = ALIGN(HUGEPAGE_SIZE);
 	_end = . ;
 
diff --git a/arch/parisc/lib/fixup.S b/arch/parisc/lib/fixup.S
index 1052b74..a5b72f2 100644
--- a/arch/parisc/lib/fixup.S
+++ b/arch/parisc/lib/fixup.S
@@ -65,34 +65,34 @@
 	.section .fixup, "ax"
 
 	/* get_user() fixups, store -EFAULT in r8, and 0 in r9 */
-ENTRY(fixup_get_user_skip_1)
+ENTRY_CFI(fixup_get_user_skip_1)
 	get_fault_ip %r1,%r8
 	ldo 4(%r1), %r1
 	ldi -EFAULT, %r8
 	bv %r0(%r1)
 	copy %r0, %r9
-ENDPROC(fixup_get_user_skip_1)
+ENDPROC_CFI(fixup_get_user_skip_1)
 
-ENTRY(fixup_get_user_skip_2)
+ENTRY_CFI(fixup_get_user_skip_2)
 	get_fault_ip %r1,%r8
 	ldo 8(%r1), %r1
 	ldi -EFAULT, %r8
 	bv %r0(%r1)
 	copy %r0, %r9
-ENDPROC(fixup_get_user_skip_2)
+ENDPROC_CFI(fixup_get_user_skip_2)
 
 	/* put_user() fixups, store -EFAULT in r8 */
-ENTRY(fixup_put_user_skip_1)
+ENTRY_CFI(fixup_put_user_skip_1)
 	get_fault_ip %r1,%r8
 	ldo 4(%r1), %r1
 	bv %r0(%r1)
 	ldi -EFAULT, %r8
-ENDPROC(fixup_put_user_skip_1)
+ENDPROC_CFI(fixup_put_user_skip_1)
 
-ENTRY(fixup_put_user_skip_2)
+ENTRY_CFI(fixup_put_user_skip_2)
 	get_fault_ip %r1,%r8
 	ldo 8(%r1), %r1
 	bv %r0(%r1)
 	ldi -EFAULT, %r8
-ENDPROC(fixup_put_user_skip_2)
+ENDPROC_CFI(fixup_put_user_skip_2)
 
diff --git a/arch/parisc/lib/lusercopy.S b/arch/parisc/lib/lusercopy.S
index a512f07..56845de 100644
--- a/arch/parisc/lib/lusercopy.S
+++ b/arch/parisc/lib/lusercopy.S
@@ -67,7 +67,7 @@
 	 * otherwise, returns number of bytes not transferred.
 	 */
 
-ENTRY(lclear_user)
+ENTRY_CFI(lclear_user)
 	.proc
 	.callinfo NO_CALLS
 	.entry
@@ -81,7 +81,7 @@
 	bv          %r0(%r2)
 	copy        %r25,%r28
 	.exit
-ENDPROC(lclear_user)
+ENDPROC_CFI(lclear_user)
 
 	.section .fixup,"ax"
 2:      fixup_branch $lclu_done
@@ -100,7 +100,7 @@
 	 *         else strlen + 1 (i.e. includes zero byte).
 	 */
 
-ENTRY(lstrnlen_user)
+ENTRY_CFI(lstrnlen_user)
 	.proc
 	.callinfo NO_CALLS
 	.entry
@@ -120,7 +120,7 @@
 $lslen_nzero:
 	b           $lslen_done
 	ldo         1(%r26),%r26 /* special case for N == 0 */
-ENDPROC(lstrnlen_user)
+ENDPROC_CFI(lstrnlen_user)
 
 	.section .fixup,"ax"
 3:      fixup_branch $lslen_done
diff --git a/arch/parisc/lib/memcpy.c b/arch/parisc/lib/memcpy.c
index b2b441b..f82ff10 100644
--- a/arch/parisc/lib/memcpy.c
+++ b/arch/parisc/lib/memcpy.c
@@ -489,20 +489,23 @@
 }
 
 #ifdef __KERNEL__
-unsigned long copy_to_user(void __user *dst, const void *src, unsigned long len)
+unsigned long __copy_to_user(void __user *dst, const void *src,
+			     unsigned long len)
 {
 	mtsp(get_kernel_space(), 1);
 	mtsp(get_user_space(), 2);
 	return pa_memcpy((void __force *)dst, src, len);
 }
+EXPORT_SYMBOL(__copy_to_user);
 
-EXPORT_SYMBOL(__copy_from_user);
-unsigned long __copy_from_user(void *dst, const void __user *src, unsigned long len)
+unsigned long __copy_from_user(void *dst, const void __user *src,
+			       unsigned long len)
 {
 	mtsp(get_user_space(), 1);
 	mtsp(get_kernel_space(), 2);
 	return pa_memcpy(dst, (void __force *)src, len);
 }
+EXPORT_SYMBOL(__copy_from_user);
 
 unsigned long copy_in_user(void __user *dst, const void __user *src, unsigned long len)
 {
@@ -520,8 +523,6 @@
 	return dst;
 }
 
-EXPORT_SYMBOL(copy_to_user);
-EXPORT_SYMBOL(copy_from_user);
 EXPORT_SYMBOL(copy_in_user);
 EXPORT_SYMBOL(memcpy);
 
diff --git a/arch/parisc/mm/fault.c b/arch/parisc/mm/fault.c
index 163af2c..47a6ca4 100644
--- a/arch/parisc/mm/fault.c
+++ b/arch/parisc/mm/fault.c
@@ -168,6 +168,43 @@
 }
 
 /*
+ * parisc hardware trap list
+ *
+ * Documented in section 3 "Addressing and Access Control" of the
+ * "PA-RISC 1.1 Architecture and Instruction Set Reference Manual"
+ * https://parisc.wiki.kernel.org/index.php/File:Pa11_acd.pdf
+ *
+ * For implementation see handle_interruption() in traps.c
+ */
+static const char * const trap_description[] = {
+	[1] "High-priority machine check (HPMC)",
+	[2] "Power failure interrupt",
+	[3] "Recovery counter trap",
+	[5] "Low-priority machine check",
+	[6] "Instruction TLB miss fault",
+	[7] "Instruction access rights / protection trap",
+	[8] "Illegal instruction trap",
+	[9] "Break instruction trap",
+	[10] "Privileged operation trap",
+	[11] "Privileged register trap",
+	[12] "Overflow trap",
+	[13] "Conditional trap",
+	[14] "FP Assist Exception trap",
+	[15] "Data TLB miss fault",
+	[16] "Non-access ITLB miss fault",
+	[17] "Non-access DTLB miss fault",
+	[18] "Data memory protection/unaligned access trap",
+	[19] "Data memory break trap",
+	[20] "TLB dirty bit trap",
+	[21] "Page reference trap",
+	[22] "Assist emulation trap",
+	[25] "Taken branch trap",
+	[26] "Data memory access rights trap",
+	[27] "Data memory protection ID trap",
+	[28] "Unaligned data reference trap",
+};
+
+/*
  * Print out info about fatal segfaults, if the show_unhandled_signals
  * sysctl is set:
  */
@@ -176,6 +213,8 @@
 		unsigned long address, struct task_struct *tsk,
 		struct vm_area_struct *vma)
 {
+	const char *trap_name = NULL;
+
 	if (!unhandled_signal(tsk, SIGSEGV))
 		return;
 
@@ -186,8 +225,15 @@
 	pr_warn("do_page_fault() command='%s' type=%lu address=0x%08lx",
 	    tsk->comm, code, address);
 	print_vma_addr(KERN_CONT " in ", regs->iaoq[0]);
+
+	if (code < ARRAY_SIZE(trap_description))
+		trap_name = trap_description[code];
+	pr_warn(KERN_CONT " trap #%lu: %s%c", code,
+		trap_name ? trap_name : "unknown",
+		vma ? ',':'\n');
+
 	if (vma)
-		pr_warn(" vm_start = 0x%08lx, vm_end = 0x%08lx\n",
+		pr_warn(KERN_CONT " vm_start = 0x%08lx, vm_end = 0x%08lx\n",
 				vma->vm_start, vma->vm_end);
 
 	show_regs(regs);
diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c
index 6b3e7c6..356f384 100644
--- a/arch/parisc/mm/init.c
+++ b/arch/parisc/mm/init.c
@@ -14,6 +14,7 @@
 #include <linux/module.h>
 #include <linux/mm.h>
 #include <linux/bootmem.h>
+#include <linux/memblock.h>
 #include <linux/gfp.h>
 #include <linux/delay.h>
 #include <linux/init.h>
@@ -79,6 +80,34 @@
 physmem_range_t pmem_ranges[MAX_PHYSMEM_RANGES] __read_mostly;
 int npmem_ranges __read_mostly;
 
+/*
+ * get_memblock() allocates pages via memblock.
+ * We can't use memblock_find_in_range(0, KERNEL_INITIAL_SIZE) here since it
+ * doesn't allocate from bottom to top which is needed because we only created
+ * the initial mapping up to KERNEL_INITIAL_SIZE in the assembly bootup code.
+ */
+static void * __init get_memblock(unsigned long size)
+{
+	static phys_addr_t search_addr __initdata;
+	phys_addr_t phys;
+
+	if (!search_addr)
+		search_addr = PAGE_ALIGN(__pa((unsigned long) &_end));
+	search_addr = ALIGN(search_addr, size);
+	while (!memblock_is_region_memory(search_addr, size) ||
+		memblock_is_region_reserved(search_addr, size)) {
+		search_addr += size;
+	}
+	phys = search_addr;
+
+	if (phys)
+		memblock_reserve(phys, size);
+	else
+		panic("get_memblock() failed.\n");
+
+	return __va(phys);
+}
+
 #ifdef CONFIG_64BIT
 #define MAX_MEM         (~0UL)
 #else /* !CONFIG_64BIT */
@@ -118,11 +147,7 @@
 
 static void __init setup_bootmem(void)
 {
-	unsigned long bootmap_size;
 	unsigned long mem_max;
-	unsigned long bootmap_pages;
-	unsigned long bootmap_start_pfn;
-	unsigned long bootmap_pfn;
 #ifndef CONFIG_DISCONTIGMEM
 	physmem_range_t pmem_holes[MAX_PHYSMEM_RANGES - 1];
 	int npmem_holes;
@@ -178,33 +203,29 @@
 	}
 #endif
 
-	if (npmem_ranges > 1) {
+	/* Print the memory ranges */
+	pr_info("Memory Ranges:\n");
 
-		/* Print the memory ranges */
-
-		printk(KERN_INFO "Memory Ranges:\n");
-
-		for (i = 0; i < npmem_ranges; i++) {
-			unsigned long start;
-			unsigned long size;
-
-			size = (pmem_ranges[i].pages << PAGE_SHIFT);
-			start = (pmem_ranges[i].start_pfn << PAGE_SHIFT);
-			printk(KERN_INFO "%2d) Start 0x%016lx End 0x%016lx Size %6ld MB\n",
-				i,start, start + (size - 1), size >> 20);
-		}
-	}
-
-	sysram_resource_count = npmem_ranges;
-	for (i = 0; i < sysram_resource_count; i++) {
+	for (i = 0; i < npmem_ranges; i++) {
 		struct resource *res = &sysram_resources[i];
+		unsigned long start;
+		unsigned long size;
+
+		size = (pmem_ranges[i].pages << PAGE_SHIFT);
+		start = (pmem_ranges[i].start_pfn << PAGE_SHIFT);
+		pr_info("%2d) Start 0x%016lx End 0x%016lx Size %6ld MB\n",
+			i, start, start + (size - 1), size >> 20);
+
+		/* request memory resource */
 		res->name = "System RAM";
-		res->start = pmem_ranges[i].start_pfn << PAGE_SHIFT;
-		res->end = res->start + (pmem_ranges[i].pages << PAGE_SHIFT)-1;
+		res->start = start;
+		res->end = start + size - 1;
 		res->flags = IORESOURCE_SYSTEM_RAM | IORESOURCE_BUSY;
 		request_resource(&iomem_resource, res);
 	}
 
+	sysram_resource_count = npmem_ranges;
+
 	/*
 	 * For 32 bit kernels we limit the amount of memory we can
 	 * support, in order to preserve enough kernel address space
@@ -263,16 +284,9 @@
 	}
 #endif
 
-	bootmap_pages = 0;
-	for (i = 0; i < npmem_ranges; i++)
-		bootmap_pages += bootmem_bootmap_pages(pmem_ranges[i].pages);
-
-	bootmap_start_pfn = PAGE_ALIGN(__pa((unsigned long) &_end)) >> PAGE_SHIFT;
-
 #ifdef CONFIG_DISCONTIGMEM
 	for (i = 0; i < MAX_PHYSMEM_RANGES; i++) {
 		memset(NODE_DATA(i), 0, sizeof(pg_data_t));
-		NODE_DATA(i)->bdata = &bootmem_node_data[i];
 	}
 	memset(pfnnid_map, 0xff, sizeof(pfnnid_map));
 
@@ -284,28 +298,24 @@
 
 	/*
 	 * Initialize and free the full range of memory in each range.
-	 * Note that the only writing these routines do are to the bootmap,
-	 * and we've made sure to locate the bootmap properly so that they
-	 * won't be writing over anything important.
 	 */
 
-	bootmap_pfn = bootmap_start_pfn;
 	max_pfn = 0;
 	for (i = 0; i < npmem_ranges; i++) {
 		unsigned long start_pfn;
 		unsigned long npages;
+		unsigned long start;
+		unsigned long size;
 
 		start_pfn = pmem_ranges[i].start_pfn;
 		npages = pmem_ranges[i].pages;
 
-		bootmap_size = init_bootmem_node(NODE_DATA(i),
-						bootmap_pfn,
-						start_pfn,
-						(start_pfn + npages) );
-		free_bootmem_node(NODE_DATA(i),
-				  (start_pfn << PAGE_SHIFT),
-				  (npages << PAGE_SHIFT) );
-		bootmap_pfn += (bootmap_size + PAGE_SIZE - 1) >> PAGE_SHIFT;
+		start = start_pfn << PAGE_SHIFT;
+		size = npages << PAGE_SHIFT;
+
+		/* add system RAM memblock */
+		memblock_add(start, size);
+
 		if ((start_pfn + npages) > max_pfn)
 			max_pfn = start_pfn + npages;
 	}
@@ -317,32 +327,22 @@
 	 */
 	max_low_pfn = max_pfn;
 
-	/* bootmap sizing messed up? */
-	BUG_ON((bootmap_pfn - bootmap_start_pfn) != bootmap_pages);
-
 	/* reserve PAGE0 pdc memory, kernel text/data/bss & bootmap */
 
 #define PDC_CONSOLE_IO_IODC_SIZE 32768
 
-	reserve_bootmem_node(NODE_DATA(0), 0UL,
-			(unsigned long)(PAGE0->mem_free +
-				PDC_CONSOLE_IO_IODC_SIZE), BOOTMEM_DEFAULT);
-	reserve_bootmem_node(NODE_DATA(0), __pa(KERNEL_BINARY_TEXT_START),
-			(unsigned long)(_end - KERNEL_BINARY_TEXT_START),
-			BOOTMEM_DEFAULT);
-	reserve_bootmem_node(NODE_DATA(0), (bootmap_start_pfn << PAGE_SHIFT),
-			((bootmap_pfn - bootmap_start_pfn) << PAGE_SHIFT),
-			BOOTMEM_DEFAULT);
+	memblock_reserve(0UL, (unsigned long)(PAGE0->mem_free +
+				PDC_CONSOLE_IO_IODC_SIZE));
+	memblock_reserve(__pa(KERNEL_BINARY_TEXT_START),
+			(unsigned long)(_end - KERNEL_BINARY_TEXT_START));
 
 #ifndef CONFIG_DISCONTIGMEM
 
 	/* reserve the holes */
 
 	for (i = 0; i < npmem_holes; i++) {
-		reserve_bootmem_node(NODE_DATA(0),
-				(pmem_holes[i].start_pfn << PAGE_SHIFT),
-				(pmem_holes[i].pages << PAGE_SHIFT),
-				BOOTMEM_DEFAULT);
+		memblock_reserve((pmem_holes[i].start_pfn << PAGE_SHIFT),
+				(pmem_holes[i].pages << PAGE_SHIFT));
 	}
 #endif
 
@@ -360,8 +360,7 @@
 			initrd_below_start_ok = 1;
 			printk(KERN_INFO "initrd: reserving %08lx-%08lx (mem_max %08lx)\n", __pa(initrd_start), __pa(initrd_start) + initrd_reserve, mem_max);
 
-			reserve_bootmem_node(NODE_DATA(0), __pa(initrd_start),
-					initrd_reserve, BOOTMEM_DEFAULT);
+			memblock_reserve(__pa(initrd_start), initrd_reserve);
 		}
 	}
 #endif
@@ -439,7 +438,7 @@
 		 */
 
 		if (!pmd) {
-			pmd = (pmd_t *) alloc_bootmem_low_pages_node(NODE_DATA(0), PAGE_SIZE << PMD_ORDER);
+			pmd = (pmd_t *) get_memblock(PAGE_SIZE << PMD_ORDER);
 			pmd = (pmd_t *) __pa(pmd);
 		}
 
@@ -458,8 +457,7 @@
 
 			pg_table = (pte_t *)pmd_address(*pmd);
 			if (!pg_table) {
-				pg_table = (pte_t *)
-					alloc_bootmem_low_pages_node(NODE_DATA(0), PAGE_SIZE);
+				pg_table = (pte_t *) get_memblock(PAGE_SIZE);
 				pg_table = (pte_t *) __pa(pg_table);
 			}
 
@@ -737,7 +735,7 @@
 	}
 #endif
 
-	empty_zero_page = alloc_bootmem_pages(PAGE_SIZE);
+	empty_zero_page = get_memblock(PAGE_SIZE);
 }
 
 static void __init gateway_init(void)
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 18d1b42..65fba4c 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -12,11 +12,6 @@
 	bool
 	default y if PPC64
 
-config WORD_SIZE
-	int
-	default 64 if PPC64
-	default 32 if !PPC64
-
 config ARCH_PHYS_ADDR_T_64BIT
        def_bool PPC64 || PHYS_64BIT
 
@@ -101,7 +96,7 @@
 	select VIRT_TO_BUS if !PPC64
 	select HAVE_IDE
 	select HAVE_IOREMAP_PROT
-	select HAVE_EFFICIENT_UNALIGNED_ACCESS if !CPU_LITTLE_ENDIAN
+	select HAVE_EFFICIENT_UNALIGNED_ACCESS if !(CPU_LITTLE_ENDIAN && POWER7_CPU)
 	select HAVE_KPROBES
 	select HAVE_ARCH_KGDB
 	select HAVE_KRETPROBES
@@ -166,6 +161,7 @@
 	select GENERIC_CPU_AUTOPROBE
 	select HAVE_VIRT_CPU_ACCOUNTING
 	select HAVE_ARCH_HARDENED_USERCOPY
+	select HAVE_KERNEL_GZIP
 
 config GENERIC_CSUM
 	def_bool CPU_LITTLE_ENDIAN
@@ -636,7 +632,7 @@
 	int "Maximum zone order"
 	range 8 9 if PPC64 && PPC_64K_PAGES
 	default "9" if PPC64 && PPC_64K_PAGES
-	range 9 13 if PPC64 && !PPC_64K_PAGES
+	range 13 13 if PPC64 && !PPC_64K_PAGES
 	default "13" if PPC64 && !PPC_64K_PAGES
 	range 9 64 if PPC32 && PPC_16K_PAGES
 	default "9" if PPC32 && PPC_16K_PAGES
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index 1934707..50d020a 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -43,31 +43,24 @@
 endif
 endif
 
-ifeq ($(CONFIG_PPC64),y)
-ifeq ($(CONFIG_CPU_LITTLE_ENDIAN),y)
-OLDARCH	:= ppc64le
+# BITS is used as extension for files which are available in a 32 bit
+# and a 64 bit version to simplify shared Makefiles.
+# e.g.: obj-y += foo_$(BITS).o
+export BITS
+
+ifdef CONFIG_PPC64
+        BITS := 64
 else
-OLDARCH	:= ppc64
-endif
-else
-ifeq ($(CONFIG_CPU_LITTLE_ENDIAN),y)
-OLDARCH	:= ppcle
-else
-OLDARCH	:= ppc
-endif
+        BITS := 32
 endif
 
-# It seems there are times we use this Makefile without
-# including the config file, but this replicates the old behaviour
-ifeq ($(CONFIG_WORD_SIZE),)
-CONFIG_WORD_SIZE := 32
-endif
-
-UTS_MACHINE := $(OLDARCH)
+machine-y = ppc
+machine-$(CONFIG_PPC64) += 64
+machine-$(CONFIG_CPU_LITTLE_ENDIAN) += le
+UTS_MACHINE := $(subst $(space),,$(machine-y))
 
 ifeq ($(CONFIG_CPU_LITTLE_ENDIAN),y)
 override LD	+= -EL
-override CROSS32AS += -mlittle-endian
 LDEMULATION	:= lppc
 GNUTARGET	:= powerpcle
 MULTIPLEWORD	:= -mno-multiple
@@ -89,10 +82,10 @@
 aflags-$(CONFIG_CPU_LITTLE_ENDIAN)	+= -mlittle-endian
 
 ifeq ($(HAS_BIARCH),y)
-override AS	+= -a$(CONFIG_WORD_SIZE)
-override LD	+= -m elf$(CONFIG_WORD_SIZE)$(LDEMULATION)
-override CC	+= -m$(CONFIG_WORD_SIZE)
-override AR	:= GNUTARGET=elf$(CONFIG_WORD_SIZE)-$(GNUTARGET) $(AR)
+override AS	+= -a$(BITS)
+override LD	+= -m elf$(BITS)$(LDEMULATION)
+override CC	+= -m$(BITS)
+override AR	:= GNUTARGET=elf$(BITS)-$(GNUTARGET) $(AR)
 endif
 
 LDFLAGS_vmlinux-y := -Bstatic
@@ -179,7 +172,7 @@
 KBUILD_CFLAGS	+= -pipe -Iarch/$(ARCH) $(CFLAGS-y)
 CPP		= $(CC) -E $(KBUILD_CFLAGS)
 
-CHECKFLAGS	+= -m$(CONFIG_WORD_SIZE) -D__powerpc__ -D__powerpc$(CONFIG_WORD_SIZE)__
+CHECKFLAGS	+= -m$(BITS) -D__powerpc__ -D__powerpc$(BITS)__
 ifdef CONFIG_CPU_BIG_ENDIAN
 CHECKFLAGS	+= -D__BIG_ENDIAN__
 else
@@ -234,7 +227,7 @@
 KBUILD_AFLAGS += $(aflags-y)
 KBUILD_CFLAGS += $(cflags-y)
 
-head-y				:= arch/powerpc/kernel/head_$(CONFIG_WORD_SIZE).o
+head-y				:= arch/powerpc/kernel/head_$(BITS).o
 head-$(CONFIG_8xx)		:= arch/powerpc/kernel/head_8xx.o
 head-$(CONFIG_40x)		:= arch/powerpc/kernel/head_40x.o
 head-$(CONFIG_44x)		:= arch/powerpc/kernel/head_44x.o
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 1a2a6e8..eae2dc8 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -19,10 +19,15 @@
 
 all: $(obj)/zImage
 
+compress-$(CONFIG_KERNEL_GZIP) := CONFIG_KERNEL_GZIP
+compress-$(CONFIG_KERNEL_XZ)   := CONFIG_KERNEL_XZ
+
 BOOTCFLAGS    := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
 		 -fno-strict-aliasing -Os -msoft-float -pipe \
 		 -fomit-frame-pointer -fno-builtin -fPIC -nostdinc \
-		 -isystem $(shell $(CROSS32CC) -print-file-name=include)
+		 -isystem $(shell $(CROSS32CC) -print-file-name=include) \
+		 -D$(compress-y)
+
 ifdef CONFIG_PPC64_BOOT_WRAPPER
 BOOTCFLAGS	+= -m64
 endif
@@ -59,13 +64,30 @@
 $(obj)/treeboot-akebono.o: BOOTCFLAGS += -mcpu=405
 $(obj)/virtex405-head.o: BOOTAFLAGS += -mcpu=405
 
+# The pre-boot decompressors pull in a lot of kernel headers and other source
+# files. This creates a bit of a dependency headache since we need to copy
+# these files into the build dir, fix up any includes and ensure that dependent
+# files are copied in the right order.
 
-zlib       := inffast.c inflate.c inftrees.c
-zlibheader := inffast.h inffixed.h inflate.h inftrees.h infutil.h
-zliblinuxheader := zlib.h zconf.h zutil.h
+# these need to be seperate variables because they are copied out of different
+# directories in the kernel tree. Sure you COULd merge them, but it's a
+# cure-is-worse-than-disease situation.
+zlib-decomp-$(CONFIG_KERNEL_GZIP) := decompress_inflate.c
+zlib-$(CONFIG_KERNEL_GZIP) := inffast.c inflate.c inftrees.c
+zlibheader-$(CONFIG_KERNEL_GZIP) := inffast.h inffixed.h inflate.h inftrees.h infutil.h
+zliblinuxheader-$(CONFIG_KERNEL_GZIP) := zlib.h zconf.h zutil.h
 
-$(addprefix $(obj)/,$(zlib) cuboot-c2k.o gunzip_util.o main.o): \
-	$(addprefix $(obj)/,$(zliblinuxheader)) $(addprefix $(obj)/,$(zlibheader))
+$(addprefix $(obj)/, decompress.o): \
+	$(addprefix $(obj)/,$(zlib-decomp-y))
+
+$(addprefix $(obj)/, $(zlib-decomp-y)): \
+	$(addprefix $(obj)/,$(zliblinuxheader-y)) \
+	$(addprefix $(obj)/,$(zlibheader-y)) \
+	$(addprefix $(obj)/,$(zlib-y))
+
+$(addprefix $(obj)/,$(zlib-y)): \
+	$(addprefix $(obj)/,$(zliblinuxheader-y)) \
+	$(addprefix $(obj)/,$(zlibheader-y))
 
 libfdt       := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c
 libfdtheader := fdt.h libfdt.h libfdt_internal.h
@@ -73,10 +95,10 @@
 $(addprefix $(obj)/,$(libfdt) libfdt-wrapper.o simpleboot.o epapr.o opal.o): \
 	$(addprefix $(obj)/,$(libfdtheader))
 
-src-wlib-y := string.S crt0.S crtsavres.S stdio.c main.c \
+src-wlib-y := string.S crt0.S crtsavres.S stdio.c decompress.c main.c \
 		$(libfdt) libfdt-wrapper.c \
 		ns16550.c serial.c simple_alloc.c div64.S util.S \
-		gunzip_util.c elf_util.c $(zlib) devtree.c stdlib.c \
+		elf_util.c $(zlib-y) devtree.c stdlib.c \
 		oflib.c ofconsole.c cuboot.c mpsc.c cpm-serial.c \
 		uartlite.c mpc52xx-psc.c opal.c opal-calls.S
 src-wlib-$(CONFIG_40x) += 4xx.c planetcore.c
@@ -125,23 +147,20 @@
 obj-plat := $(addsuffix .o, $(basename $(addprefix $(obj)/, $(src-plat))))
 obj-plat: $(libfdt)
 
-quiet_cmd_copy_zlib = COPY    $@
-      cmd_copy_zlib = sed "s@__used@@;s@<linux/\([^>]*\).*@\"\1\"@" $< > $@
+quiet_cmd_copy_kern_src = COPY    $@
+      cmd_copy_kern_src = sed -f $(srctree)/arch/powerpc/boot/fixup-headers.sed $< > $@
 
-quiet_cmd_copy_zlibheader = COPY    $@
-      cmd_copy_zlibheader = sed "s@<linux/\([^>]*\).*@\"\1\"@" $< > $@
-# stddef.h for NULL
-quiet_cmd_copy_zliblinuxheader = COPY    $@
-      cmd_copy_zliblinuxheader = sed "s@<linux/string.h>@\"string.h\"@;s@<linux/kernel.h>@<stddef.h>@;s@<linux/\([^>]*\).*@\"\1\"@" $< > $@
+$(addprefix $(obj)/,$(zlib-y)): $(obj)/%: $(srctree)/lib/zlib_inflate/%
+	$(call cmd,copy_kern_src)
 
-$(addprefix $(obj)/,$(zlib)): $(obj)/%: $(srctree)/lib/zlib_inflate/%
-	$(call cmd,copy_zlib)
+$(addprefix $(obj)/,$(zlibheader-y)): $(obj)/%: $(srctree)/lib/zlib_inflate/%
+	$(call cmd,copy_kern_src)
 
-$(addprefix $(obj)/,$(zlibheader)): $(obj)/%: $(srctree)/lib/zlib_inflate/%
-	$(call cmd,copy_zlibheader)
+$(addprefix $(obj)/,$(zliblinuxheader-y)): $(obj)/%: $(srctree)/include/linux/%
+	$(call cmd,copy_kern_src)
 
-$(addprefix $(obj)/,$(zliblinuxheader)): $(obj)/%: $(srctree)/include/linux/%
-	$(call cmd,copy_zliblinuxheader)
+$(addprefix $(obj)/,$(zlib-decomp-y)): $(obj)/%: $(srctree)/lib/%
+	$(call cmd,copy_kern_src)
 
 quiet_cmd_copy_libfdt = COPY    $@
       cmd_copy_libfdt = cp $< $@
@@ -150,17 +169,17 @@
 	$(call cmd,copy_libfdt)
 
 $(obj)/empty.c:
-	@touch $@
+	$(Q)touch $@
 
 $(obj)/zImage.lds: $(obj)/%: $(srctree)/$(src)/%.S
 	$(CROSS32CC) $(cpp_flags) -E -Wp,-MD,$(depfile) -P -Upowerpc \
 		-D__ASSEMBLY__ -DLINKER_SCRIPT -o $@ $<
 
 $(obj)/zImage.coff.lds $(obj)/zImage.ps3.lds : $(obj)/%: $(srctree)/$(src)/%.S
-	@cp $< $@
+	$(Q)cp $< $@
 
-clean-files := $(zlib) $(zlibheader) $(zliblinuxheader) \
-		$(libfdt) $(libfdtheader) \
+clean-files := $(zlib-) $(zlibheader-) $(zliblinuxheader-) \
+		$(zlib-decomp-) $(libfdt) $(libfdtheader) \
 		empty.c zImage.coff.lds zImage.ps3.lds zImage.lds
 
 quiet_cmd_bootcc = BOOTCC  $@
@@ -207,10 +226,14 @@
 endif
 endif
 
+compressor-$(CONFIG_KERNEL_GZIP) := gz
+compressor-$(CONFIG_KERNEL_XZ)   := xz
+
 # args (to if_changed): 1 = (this rule), 2 = platform, 3 = dts 4=dtb 5=initrd
 quiet_cmd_wrap	= WRAP    $@
-      cmd_wrap	=$(CONFIG_SHELL) $(wrapper) -c -o $@ -p $2 $(CROSSWRAP) \
-		$(if $3, -s $3)$(if $4, -d $4)$(if $5, -i $5) vmlinux
+      cmd_wrap	=$(CONFIG_SHELL) $(wrapper) -Z $(compressor-y) -c -o $@ -p $2 \
+		$(CROSSWRAP) $(if $3, -s $3)$(if $4, -d $4)$(if $5, -i $5) \
+		vmlinux
 
 image-$(CONFIG_PPC_PSERIES)		+= zImage.pseries
 image-$(CONFIG_PPC_POWERNV)		+= zImage.pseries
@@ -391,9 +414,9 @@
 endif
 
 $(obj)/zImage:		$(addprefix $(obj)/, $(image-y))
-	@rm -f $@; ln $< $@
+	$(Q)rm -f $@; ln $< $@
 $(obj)/zImage.initrd:	$(addprefix $(obj)/, $(initrd-y))
-	@rm -f $@; ln $< $@
+	$(Q)rm -f $@; ln $< $@
 
 # Only install the vmlinux
 install: $(CONFIGURE) $(addprefix $(obj)/, $(image-y))
@@ -410,8 +433,9 @@
 	zImage.maple simpleImage.* otheros.bld *.dtb
 
 # clean up files cached by wrapper
-clean-kernel := vmlinux.strip vmlinux.bin
-clean-kernel += $(addsuffix .gz,$(clean-kernel))
+clean-kernel-base := vmlinux.strip vmlinux.bin
+clean-kernel := $(addsuffix .gz,$(clean-kernel-base))
+clean-kernel += $(addsuffix .xz,$(clean-kernel-base))
 # If not absolute clean-files are relative to $(obj).
 clean-files += $(addprefix $(objtree)/, $(clean-kernel))
 
diff --git a/arch/powerpc/boot/cuboot-c2k.c b/arch/powerpc/boot/cuboot-c2k.c
index e435949..9309c51 100644
--- a/arch/powerpc/boot/cuboot-c2k.c
+++ b/arch/powerpc/boot/cuboot-c2k.c
@@ -18,7 +18,6 @@
 #include "io.h"
 #include "ops.h"
 #include "elf.h"
-#include "gunzip_util.h"
 #include "mv64x60.h"
 #include "cuboot.h"
 #include "ppcboot.h"
diff --git a/arch/powerpc/boot/decompress.c b/arch/powerpc/boot/decompress.c
new file mode 100644
index 0000000..3aff442
--- /dev/null
+++ b/arch/powerpc/boot/decompress.c
@@ -0,0 +1,148 @@
+/*
+ * Wrapper around the kernel's pre-boot decompression library.
+ *
+ * Copyright (C) IBM Corporation 2016.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include "elf.h"
+#include "page.h"
+#include "string.h"
+#include "stdio.h"
+#include "ops.h"
+#include "reg.h"
+#include "types.h"
+
+/*
+ * The decompressor_*.c files play #ifdef games so they can be used in both
+ * pre-boot and regular kernel code. We need these definitions to make the
+ * includes work.
+ */
+
+#define STATIC static
+#define INIT
+#define __always_inline inline
+
+/*
+ * The build process will copy the required zlib source files and headers
+ * out of lib/ and "fix" the includes so they do not pull in other kernel
+ * headers.
+ */
+
+#ifdef CONFIG_KERNEL_GZIP
+#	include "decompress_inflate.c"
+#endif
+
+#ifdef CONFIG_KERNEL_XZ
+#	include "xz_config.h"
+#	include "../../../lib/decompress_unxz.c"
+#endif
+
+/* globals for tracking the state of the decompression */
+static unsigned long decompressed_bytes;
+static unsigned long limit;
+static unsigned long skip;
+static char *output_buffer;
+
+/*
+ * flush() is called by __decompress() when the decompressor's scratch buffer is
+ * full.
+ */
+static long flush(void *v, unsigned long buffer_size)
+{
+	unsigned long end = decompressed_bytes + buffer_size;
+	unsigned long size = buffer_size;
+	unsigned long offset = 0;
+	char *in = v;
+	char *out;
+
+	/*
+	 * if we hit our decompression limit, we need to fake an error to abort
+	 * the in-progress decompression.
+	 */
+	if (decompressed_bytes >= limit)
+		return -1;
+
+	/* skip this entire block */
+	if (end <= skip) {
+		decompressed_bytes += buffer_size;
+		return buffer_size;
+	}
+
+	/* skip some data at the start, but keep the rest of the block */
+	if (decompressed_bytes < skip && end > skip) {
+		offset = skip - decompressed_bytes;
+
+		in += offset;
+		size -= offset;
+		decompressed_bytes += offset;
+	}
+
+	out = &output_buffer[decompressed_bytes - skip];
+	size = min(decompressed_bytes + size, limit) - decompressed_bytes;
+
+	memcpy(out, in, size);
+	decompressed_bytes += size;
+
+	return buffer_size;
+}
+
+static void print_err(char *s)
+{
+	/* suppress the "error" when we terminate the decompressor */
+	if (decompressed_bytes >= limit)
+		return;
+
+	printf("Decompression error: '%s'\n\r", s);
+}
+
+/**
+ * partial_decompress - decompresses part or all of a compressed buffer
+ * @inbuf:       input buffer
+ * @input_size:  length of the input buffer
+ * @outbuf:      input buffer
+ * @output_size: length of the input buffer
+ * @skip         number of output bytes to ignore
+ *
+ * This function takes compressed data from inbuf, decompresses and write it to
+ * outbuf. Once output_size bytes are written to the output buffer, or the
+ * stream is exhausted the function will return the number of bytes that were
+ * decompressed. Otherwise it will return whatever error code the decompressor
+ * reported (NB: This is specific to each decompressor type).
+ *
+ * The skip functionality is mainly there so the program and discover
+ * the size of the compressed image so that it can ask firmware (if present)
+ * for an appropriately sized buffer.
+ */
+long partial_decompress(void *inbuf, unsigned long input_size,
+	void *outbuf, unsigned long output_size, unsigned long _skip)
+{
+	int ret;
+
+	/*
+	 * The skipped bytes needs to be included in the size of data we want
+	 * to decompress.
+	 */
+	output_size += _skip;
+
+	decompressed_bytes = 0;
+	output_buffer = outbuf;
+	limit = output_size;
+	skip = _skip;
+
+	ret = __decompress(inbuf, input_size, NULL, flush, outbuf,
+		output_size, NULL, print_err);
+
+	/*
+	 * If decompression was aborted due to an actual error rather than
+	 * a fake error that we used to abort, then we should report it.
+	 */
+	if (decompressed_bytes < limit)
+		return ret;
+
+	return decompressed_bytes - skip;
+}
diff --git a/arch/powerpc/boot/fixup-headers.sed b/arch/powerpc/boot/fixup-headers.sed
new file mode 100644
index 0000000..9636242
--- /dev/null
+++ b/arch/powerpc/boot/fixup-headers.sed
@@ -0,0 +1,12 @@
+# Copyright 2016 IBM Corporation.
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License version 2 or later as
+# published by the Free Software Foundation.
+
+s@#include <linux/decompress/mm\.h>@@;
+s@\"zlib_inflate/\([^\"]*\).*@"\1"@;
+s@<linux/kernel.h>@<stddef.h>@;
+
+s@__used@@;
+s@<linux/\([^>]*\).*@"\1"@;
diff --git a/arch/powerpc/boot/gunzip_util.c b/arch/powerpc/boot/gunzip_util.c
deleted file mode 100644
index 9dc5250..0000000
--- a/arch/powerpc/boot/gunzip_util.c
+++ /dev/null
@@ -1,204 +0,0 @@
-/*
- * Copyright 2007 David Gibson, IBM Corporation.
- * Based on earlier work, Copyright (C) Paul Mackerras 1997.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <stddef.h>
-#include "string.h"
-#include "stdio.h"
-#include "ops.h"
-#include "gunzip_util.h"
-
-#define HEAD_CRC	2
-#define EXTRA_FIELD	4
-#define ORIG_NAME	8
-#define COMMENT		0x10
-#define RESERVED	0xe0
-
-/**
- * gunzip_start - prepare to decompress gzip data
- * @state:     decompressor state structure to be initialized
- * @src:       buffer containing gzip compressed or uncompressed data
- * @srclen:    size in bytes of the buffer at src
- *
- * If the buffer at @src contains a gzip header, this function
- * initializes zlib to decompress the data, storing the decompression
- * state in @state.  The other functions in this file can then be used
- * to decompress data from the gzipped stream.
- *
- * If the buffer at @src does not contain a gzip header, it is assumed
- * to contain uncompressed data.  The buffer information is recorded
- * in @state and the other functions in this file will simply copy
- * data from the uncompressed data stream at @src.
- *
- * Any errors, such as bad compressed data, cause an error to be
- * printed an the platform's exit() function to be called.
- */
-void gunzip_start(struct gunzip_state *state, void *src, int srclen)
-{
-	char *hdr = src;
-	int hdrlen = 0;
-
-	memset(state, 0, sizeof(*state));
-
-	/* Check for gzip magic number */
-	if ((hdr[0] == 0x1f) && (hdr[1] == 0x8b)) {
-		/* gzip data, initialize zlib parameters */
-		int r, flags;
-
-		state->s.workspace = state->scratch;
-		if (zlib_inflate_workspacesize() > sizeof(state->scratch))
-			fatal("insufficient scratch space for gunzip\n\r");
-
-		/* skip header */
-		hdrlen = 10;
-		flags = hdr[3];
-		if (hdr[2] != Z_DEFLATED || (flags & RESERVED) != 0)
-			fatal("bad gzipped data\n\r");
-		if ((flags & EXTRA_FIELD) != 0)
-			hdrlen = 12 + hdr[10] + (hdr[11] << 8);
-		if ((flags & ORIG_NAME) != 0)
-			while (hdr[hdrlen++] != 0)
-				;
-		if ((flags & COMMENT) != 0)
-			while (hdr[hdrlen++] != 0)
-				;
-		if ((flags & HEAD_CRC) != 0)
-			hdrlen += 2;
-		if (hdrlen >= srclen)
-			fatal("gunzip_start: ran out of data in header\n\r");
-
-		r = zlib_inflateInit2(&state->s, -MAX_WBITS);
-		if (r != Z_OK)
-			fatal("inflateInit2 returned %d\n\r", r);
-	}
-
-	state->s.total_in = hdrlen;
-	state->s.next_in = src + hdrlen;
-	state->s.avail_in = srclen - hdrlen;
-}
-
-/**
- * gunzip_partial - extract bytes from a gzip data stream
- * @state:     gzip state structure previously initialized by gunzip_start()
- * @dst:       buffer to store extracted data
- * @dstlen:    maximum number of bytes to extract
- *
- * This function extracts at most @dstlen bytes from the data stream
- * previously associated with @state by gunzip_start(), decompressing
- * if necessary.  Exactly @dstlen bytes are extracted unless the data
- * stream doesn't contain enough bytes, in which case the entire
- * remainder of the stream is decompressed.
- *
- * Returns the actual number of bytes extracted.  If any errors occur,
- * such as a corrupted compressed stream, an error is printed an the
- * platform's exit() function is called.
- */
-int gunzip_partial(struct gunzip_state *state, void *dst, int dstlen)
-{
-	int len;
-
-	if (state->s.workspace) {
-		/* gunzipping */
-		int r;
-
-		state->s.next_out = dst;
-		state->s.avail_out = dstlen;
-		r = zlib_inflate(&state->s, Z_FULL_FLUSH);
-		if (r != Z_OK && r != Z_STREAM_END)
-			fatal("inflate returned %d msg: %s\n\r", r, state->s.msg);
-		len = state->s.next_out - (Byte *)dst;
-	} else {
-		/* uncompressed image */
-		len = min(state->s.avail_in, (uLong)dstlen);
-		memcpy(dst, state->s.next_in, len);
-		state->s.next_in += len;
-		state->s.avail_in -= len;
-	}
-	return len;
-}
-
-/**
- * gunzip_exactly - extract a fixed number of bytes from a gzip data stream
- * @state:     gzip state structure previously initialized by gunzip_start()
- * @dst:       buffer to store extracted data
- * @dstlen:    number of bytes to extract
- *
- * This function extracts exactly @dstlen bytes from the data stream
- * previously associated with @state by gunzip_start(), decompressing
- * if necessary.
- *
- * If there are less @dstlen bytes available in the data stream, or if
- * any other errors occur, such as a corrupted compressed stream, an
- * error is printed an the platform's exit() function is called.
- */
-void gunzip_exactly(struct gunzip_state *state, void *dst, int dstlen)
-{
-	int len;
-
-	len  = gunzip_partial(state, dst, dstlen);
-	if (len < dstlen)
-		fatal("\n\rgunzip_exactly: ran out of data!"
-				" Wanted %d, got %d.\n\r", dstlen, len);
-}
-
-/**
- * gunzip_discard - discard bytes from a gzip data stream
- * @state:     gzip state structure previously initialized by gunzip_start()
- * @len:       number of bytes to discard
- *
- * This function extracts, then discards exactly @len bytes from the
- * data stream previously associated with @state by gunzip_start().
- * Subsequent gunzip_partial(), gunzip_exactly() or gunzip_finish()
- * calls will extract the data following the discarded bytes in the
- * data stream.
- *
- * If there are less @len bytes available in the data stream, or if
- * any other errors occur, such as a corrupted compressed stream, an
- * error is printed an the platform's exit() function is called.
- */
-void gunzip_discard(struct gunzip_state *state, int len)
-{
-	static char discard_buf[128];
-
-	while (len > sizeof(discard_buf)) {
-		gunzip_exactly(state, discard_buf, sizeof(discard_buf));
-		len -= sizeof(discard_buf);
-	}
-
-	if (len > 0)
-		gunzip_exactly(state, discard_buf, len);
-}
-
-/**
- * gunzip_finish - extract all remaining bytes from a gzip data stream
- * @state:     gzip state structure previously initialized by gunzip_start()
- * @dst:       buffer to store extracted data
- * @dstlen:    maximum number of bytes to extract
- *
- * This function extracts all remaining data, or at most @dstlen
- * bytes, from the stream previously associated with @state by
- * gunzip_start().  zlib is then shut down, so it is an error to use
- * any of the functions in this file on @state until it is
- * re-initialized with another call to gunzip_start().
- *
- * If any errors occur, such as a corrupted compressed stream, an
- * error is printed an the platform's exit() function is called.
- */
-int gunzip_finish(struct gunzip_state *state, void *dst, int dstlen)
-{
-	int len;
-
-	len = gunzip_partial(state, dst, dstlen);
-
-	if (state->s.workspace) {
-		zlib_inflateEnd(&state->s);
-	}
-
-	return len;
-}
diff --git a/arch/powerpc/boot/gunzip_util.h b/arch/powerpc/boot/gunzip_util.h
deleted file mode 100644
index b3dfa6e..0000000
--- a/arch/powerpc/boot/gunzip_util.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * Decompression convenience functions
- *
- * Copyright 2007 David Gibson, IBM Corporation.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#ifndef _PPC_BOOT_GUNZIP_UTIL_H_
-#define _PPC_BOOT_GUNZIP_UTIL_H_
-
-#include "zlib.h"
-
-/*
- * These functions are designed to make life easy for decompressing
- * kernel images, initrd images or any other gzip compressed image,
- * particularly if its useful to decompress part of the image (e.g. to
- * examine headers) before decompressing the remainder.
- *
- * To use:
- *     - declare a gunzip_state structure
- *     - use gunzip_start() to initialize the state, associating it
- *       with a stream of compressed data
- *     - use gunzip_partial(), gunzip_exactly() and gunzip_discard()
- *       in any combination to extract pieces of data from the stream
- *     - Finally use gunzip_finish() to extract the tail of the
- *       compressed stream and wind up zlib
- */
-
-/* scratch space for gunzip; 46912 is from zlib_inflate_workspacesize() */
-#define GUNZIP_SCRATCH_SIZE	46912
-
-struct gunzip_state {
-	z_stream s;
-	char scratch[46912];
-};
-
-void gunzip_start(struct gunzip_state *state, void *src, int srclen);
-int gunzip_partial(struct gunzip_state *state, void *dst, int dstlen);
-void gunzip_exactly(struct gunzip_state *state, void *dst, int len);
-void gunzip_discard(struct gunzip_state *state, int len);
-int gunzip_finish(struct gunzip_state *state, void *dst, int len);
-
-#endif /* _PPC_BOOT_GUNZIP_UTIL_H_ */
diff --git a/arch/powerpc/boot/main.c b/arch/powerpc/boot/main.c
index d80161b..f7a184b 100644
--- a/arch/powerpc/boot/main.c
+++ b/arch/powerpc/boot/main.c
@@ -15,11 +15,8 @@
 #include "string.h"
 #include "stdio.h"
 #include "ops.h"
-#include "gunzip_util.h"
 #include "reg.h"
 
-static struct gunzip_state gzstate;
-
 struct addr_range {
 	void *addr;
 	unsigned long size;
@@ -30,15 +27,14 @@
 static struct addr_range prep_kernel(void)
 {
 	char elfheader[256];
-	void *vmlinuz_addr = _vmlinux_start;
+	unsigned char *vmlinuz_addr = (unsigned char *)_vmlinux_start;
 	unsigned long vmlinuz_size = _vmlinux_end - _vmlinux_start;
 	void *addr = 0;
 	struct elf_info ei;
-	int len;
+	long len;
 
-	/* gunzip the ELF header of the kernel */
-	gunzip_start(&gzstate, vmlinuz_addr, vmlinuz_size);
-	gunzip_exactly(&gzstate, elfheader, sizeof(elfheader));
+	partial_decompress(vmlinuz_addr, vmlinuz_size,
+		elfheader, sizeof(elfheader), 0);
 
 	if (!parse_elf64(elfheader, &ei) && !parse_elf32(elfheader, &ei))
 		fatal("Error: not a valid PPC32 or PPC64 ELF file!\n\r");
@@ -51,7 +47,7 @@
 	 * the kernel bss must be claimed (it will be zero'd by the
 	 * kernel itself)
 	 */
-	printf("Allocating 0x%lx bytes for kernel ...\n\r", ei.memsize);
+	printf("Allocating 0x%lx bytes for kernel...\n\r", ei.memsize);
 
 	if (platform_ops.vmlinux_alloc) {
 		addr = platform_ops.vmlinux_alloc(ei.memsize);
@@ -71,16 +67,21 @@
 					"device tree\n\r");
 	}
 
-	/* Finally, gunzip the kernel */
-	printf("gunzipping (0x%p <- 0x%p:0x%p)...", addr,
+	/* Finally, decompress the kernel */
+	printf("Decompressing (0x%p <- 0x%p:0x%p)...\n\r", addr,
 	       vmlinuz_addr, vmlinuz_addr+vmlinuz_size);
-	/* discard up to the actual load data */
-	gunzip_discard(&gzstate, ei.elfoffset - sizeof(elfheader));
-	len = gunzip_finish(&gzstate, addr, ei.loadsize);
+
+	len = partial_decompress(vmlinuz_addr, vmlinuz_size,
+		addr, ei.loadsize, ei.elfoffset);
+
+	if (len < 0)
+		fatal("Decompression failed with error code %ld\n\r", len);
+
 	if (len != ei.loadsize)
-		fatal("ran out of data!  only got 0x%x of 0x%lx bytes.\n\r",
-				len, ei.loadsize);
-	printf("done 0x%x bytes\n\r", len);
+		 fatal("Decompression error: got 0x%lx bytes, expected 0x%lx.\n\r",
+			 len, ei.loadsize);
+
+	printf("Done! Decompressed 0x%lx bytes\n\r", len);
 
 	flush_cache(addr, ei.loadsize);
 
diff --git a/arch/powerpc/boot/ops.h b/arch/powerpc/boot/ops.h
index e19b64e..309d1b1 100644
--- a/arch/powerpc/boot/ops.h
+++ b/arch/powerpc/boot/ops.h
@@ -260,4 +260,7 @@
 	return 31 - bit;
 }
 
+long partial_decompress(void *inbuf, unsigned long input_size, void *outbuf,
+	unsigned long output_size, unsigned long skip);
+
 #endif /* _PPC_BOOT_OPS_H_ */
diff --git a/arch/powerpc/boot/stdbool.h b/arch/powerpc/boot/stdbool.h
new file mode 100644
index 0000000..f818efb
--- /dev/null
+++ b/arch/powerpc/boot/stdbool.h
@@ -0,0 +1,14 @@
+/*
+ * Copyright (C) IBM Corporation 2016.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * This file is only necessary because some of the pre-boot decompressors
+ * expect stdbool.h to be available.
+ *
+ */
+
+#include "types.h"
diff --git a/arch/powerpc/boot/stdint.h b/arch/powerpc/boot/stdint.h
new file mode 100644
index 0000000..c1c853b
--- /dev/null
+++ b/arch/powerpc/boot/stdint.h
@@ -0,0 +1,13 @@
+/*
+ * Copyright (C) IBM Corporation 2016.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * This file is only necessary because some of the pre-boot decompressors
+ * expect stdint.h to be available.
+ */
+
+#include "types.h"
diff --git a/arch/powerpc/boot/types.h b/arch/powerpc/boot/types.h
index 85565a8..af6b66b 100644
--- a/arch/powerpc/boot/types.h
+++ b/arch/powerpc/boot/types.h
@@ -1,6 +1,8 @@
 #ifndef _TYPES_H_
 #define _TYPES_H_
 
+#include <stdbool.h>
+
 #define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
 
 typedef unsigned char		u8;
@@ -34,4 +36,16 @@
 	(void) (&_x == &_y);	\
 	_x > _y ? _x : _y; })
 
+#define min_t(type, a, b) min(((type) a), ((type) b))
+#define max_t(type, a, b) max(((type) a), ((type) b))
+
+typedef int bool;
+
+#ifndef true
+#define true 1
+#endif
+
+#ifndef false
+#define false 0
+#endif
 #endif /* _TYPES_H_ */
diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper
index 6681ec3..404b3aa 100755
--- a/arch/powerpc/boot/wrapper
+++ b/arch/powerpc/boot/wrapper
@@ -20,6 +20,8 @@
 # -D dir	specify directory containing data files used by script
 #		(default ./arch/powerpc/boot)
 # -W dir	specify working directory for temporary files (default .)
+# -z		use gzip (legacy)
+# -Z zsuffix    compression to use (gz, xz or none)
 
 # Stop execution if any command fails
 set -e
@@ -38,7 +40,7 @@
 dts=
 cacheit=
 binary=
-gzip=.gz
+compression=.gz
 pie=
 format=
 
@@ -59,7 +61,8 @@
 usage() {
     echo 'Usage: wrapper [-o output] [-p platform] [-i initrd]' >&2
     echo '       [-d devtree] [-s tree.dts] [-c] [-C cross-prefix]' >&2
-    echo '       [-D datadir] [-W workingdir] [--no-gzip] [vmlinux]' >&2
+    echo '       [-D datadir] [-W workingdir] [-Z (gz|xz|none)]' >&2
+    echo '       [--no-compression] [vmlinux]' >&2
     exit 1
 }
 
@@ -126,8 +129,24 @@
 	[ "$#" -gt 0 ] || usage
 	tmpdir="$1"
 	;;
+    -z)
+	compression=.gz
+	;;
+    -Z)
+	shift
+	[ "$#" -gt 0 ] || usage
+        [ "$1" != "gz" -o "$1" != "xz" -o "$1" != "none" ] || usage
+
+	compression=".$1"
+
+        if [ $compression = ".none" ]; then
+                compression=
+        fi
+	;;
     --no-gzip)
-        gzip=
+        # a "feature" of the the wrapper script is that it can be used outside
+        # the kernel tree. So keeping this around for backwards compatibility.
+        compression=
         ;;
     -?)
 	usage
@@ -140,6 +159,7 @@
     shift
 done
 
+
 if [ -n "$dts" ]; then
     if [ ! -r "$dts" -a -r "$object/dts/$dts" ]; then
 	dts="$object/dts/$dts"
@@ -212,7 +232,7 @@
     ;;
 cuboot*)
     binary=y
-    gzip=
+    compression=
     case "$platform" in
     *-mpc866ads|*-mpc885ads|*-adder875*|*-ep88xc)
         platformo=$object/cuboot-8xx.o
@@ -243,7 +263,7 @@
 ps3)
     platformo="$object/ps3-head.o $object/ps3-hvcall.o $object/ps3.o"
     lds=$object/zImage.ps3.lds
-    gzip=
+    compression=
     ext=bin
     objflags="-O binary --set-section-flags=.bss=contents,alloc,load,data"
     ksection=.kernel:vmlinux.bin
@@ -310,27 +330,37 @@
 esac
 
 vmz="$tmpdir/`basename \"$kernel\"`.$ext"
-if [ -z "$cacheit" -o ! -f "$vmz$gzip" -o "$vmz$gzip" -ot "$kernel" ]; then
-    ${CROSS}objcopy $objflags "$kernel" "$vmz.$$"
 
-    strip_size=$(stat -c %s $vmz.$$)
+# Calculate the vmlinux.strip size
+${CROSS}objcopy $objflags "$kernel" "$vmz.$$"
+strip_size=$(stat -c %s $vmz.$$)
 
-    if [ -n "$gzip" ]; then
+if [ -z "$cacheit" -o ! -f "$vmz$compression" -o "$vmz$compression" -ot "$kernel" ]; then
+    # recompress the image if we need to
+    case $compression in
+    .xz)
+        xz --check=crc32 -f -6 "$vmz.$$"
+        ;;
+    .gz)
         gzip -n -f -9 "$vmz.$$"
-    fi
+        ;;
+    *)
+        # drop the compression suffix so the stripped vmlinux is used
+        compression=
+	;;
+    esac
 
     if [ -n "$cacheit" ]; then
-	mv -f "$vmz.$$$gzip" "$vmz$gzip"
+	mv -f "$vmz.$$$compression" "$vmz$compression"
     else
 	vmz="$vmz.$$"
     fi
 else
-    # Calculate the vmlinux.strip size
-    ${CROSS}objcopy $objflags "$kernel" "$vmz.$$"
-    strip_size=$(stat -c %s $vmz.$$)
     rm -f $vmz.$$
 fi
 
+vmz="$vmz$compression"
+
 if [ "$make_space" = "y" ]; then
 	# Round the size to next higher MB limit
 	round_size=$(((strip_size + 0xfffff) & 0xfff00000))
@@ -346,8 +376,6 @@
 	fi
 fi
 
-vmz="$vmz$gzip"
-
 # Extract kernel version information, some platforms want to include
 # it in the image header
 version=`${CROSS}strings "$kernel" | grep '^Linux version [-0-9.]' | \
@@ -417,6 +445,7 @@
     if [ -n "$link_address" ] ; then
         text_start="-Ttext $link_address"
     fi
+#link everything
     ${CROSS}ld -m $format -T $lds $text_start $pie -o "$ofile" \
 	$platformo $tmp $object/wrapper.a
     rm $tmp
diff --git a/arch/powerpc/boot/xz_config.h b/arch/powerpc/boot/xz_config.h
new file mode 100644
index 0000000..5c6afdb
--- /dev/null
+++ b/arch/powerpc/boot/xz_config.h
@@ -0,0 +1,39 @@
+#ifndef __XZ_CONFIG_H__
+#define __XZ_CONFIG_H__
+
+/*
+ * most of this is copied from lib/xz/xz_private.h, we can't use their defines
+ * since the boot wrapper is not built in the same environment as the rest of
+ * the kernel.
+ */
+
+#include "types.h"
+#include "swab.h"
+
+static inline uint32_t swab32p(void *p)
+{
+	uint32_t *q = p;
+
+	return swab32(*q);
+}
+
+#ifdef __LITTLE_ENDIAN__
+#define get_le32(p) (*((uint32_t *) (p)))
+#else
+#define get_le32(p) swab32p(p)
+#endif
+
+#define memeq(a, b, size) (memcmp(a, b, size) == 0)
+#define memzero(buf, size) memset(buf, 0, size)
+
+/* prevent the inclusion of the xz-preboot MM headers */
+#define DECOMPR_MM_H
+#define memmove memmove
+#define XZ_EXTERN static
+
+/* xz.h needs to be included directly since we need enum xz_mode */
+#include "../../../include/linux/xz.h"
+
+#undef XZ_EXTERN
+
+#endif
diff --git a/arch/powerpc/configs/powernv_defconfig b/arch/powerpc/configs/powernv_defconfig
index dce352e..d98b6eb 100644
--- a/arch/powerpc/configs/powernv_defconfig
+++ b/arch/powerpc/configs/powernv_defconfig
@@ -15,6 +15,8 @@
 CONFIG_TASK_IO_ACCOUNTING=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=18
+CONFIG_LOG_CPU_MAX_BUF_SHIFT=13
 CONFIG_NUMA_BALANCING=y
 CONFIG_CGROUPS=y
 CONFIG_MEMCG=y
@@ -95,7 +97,7 @@
 CONFIG_BLK_DEV_GENERIC=y
 CONFIG_BLK_DEV_AMD74XX=y
 CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
+CONFIG_CHR_DEV_ST=m
 CONFIG_BLK_DEV_SR=y
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=y
@@ -107,7 +109,7 @@
 CONFIG_SCSI_BNX2_ISCSI=m
 CONFIG_BE2ISCSI=m
 CONFIG_SCSI_MPT2SAS=m
-CONFIG_SCSI_SYM53C8XX_2=y
+CONFIG_SCSI_SYM53C8XX_2=m
 CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
 CONFIG_SCSI_IPR=y
 CONFIG_SCSI_QLA_FC=m
@@ -149,10 +151,10 @@
 CONFIG_VETH=m
 CONFIG_VIRTIO_NET=m
 CONFIG_VHOST_NET=m
-CONFIG_VORTEX=y
+CONFIG_VORTEX=m
 CONFIG_ACENIC=m
 CONFIG_ACENIC_OMIT_TIGON_I=y
-CONFIG_PCNET32=y
+CONFIG_PCNET32=m
 CONFIG_TIGON3=y
 CONFIG_BNX2X=m
 CONFIG_CHELSIO_T1=m
@@ -163,6 +165,7 @@
 CONFIG_E1000E=y
 CONFIG_IXGB=m
 CONFIG_IXGBE=m
+CONFIG_I40E=m
 CONFIG_MLX4_EN=m
 CONFIG_MYRI10GE=m
 CONFIG_QLGE=m
@@ -238,7 +241,7 @@
 CONFIG_EXT4_FS=y
 CONFIG_EXT4_FS_POSIX_ACL=y
 CONFIG_EXT4_FS_SECURITY=y
-CONFIG_REISERFS_FS=y
+CONFIG_REISERFS_FS=m
 CONFIG_REISERFS_FS_XATTR=y
 CONFIG_REISERFS_FS_POSIX_ACL=y
 CONFIG_REISERFS_FS_SECURITY=y
@@ -253,10 +256,10 @@
 CONFIG_AUTOFS4_FS=m
 CONFIG_FUSE_FS=m
 CONFIG_OVERLAY_FS=m
-CONFIG_ISO9660_FS=y
+CONFIG_ISO9660_FS=m
 CONFIG_UDF_FS=m
 CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
+CONFIG_VFAT_FS=m
 CONFIG_PROC_KCORE=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
@@ -310,6 +313,8 @@
 CONFIG_CRYPTO_TWOFISH=m
 CONFIG_CRYPTO_LZO=m
 CONFIG_CRYPTO_DEV_NX=y
+CONFIG_CRYPTO_DEV_VMX=y
+CONFIG_CRYPTO_DEV_VMX_ENCRYPT=m
 CONFIG_VIRTUALIZATION=y
 CONFIG_KVM_BOOK3S_64=m
 CONFIG_KVM_BOOK3S_64_HV=m
diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig
index 0a8d250..58a98d4 100644
--- a/arch/powerpc/configs/ppc64_defconfig
+++ b/arch/powerpc/configs/ppc64_defconfig
@@ -10,6 +10,8 @@
 CONFIG_TASK_DELAY_ACCT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=18
+CONFIG_LOG_CPU_MAX_BUF_SHIFT=13
 CONFIG_CGROUPS=y
 CONFIG_CPUSETS=y
 CONFIG_BLK_DEV_INITRD=y
@@ -90,7 +92,7 @@
 CONFIG_BLK_DEV_IDE_PMAC=y
 CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
 CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
+CONFIG_CHR_DEV_ST=m
 CONFIG_BLK_DEV_SR=y
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=y
@@ -103,7 +105,7 @@
 CONFIG_SCSI_MPT2SAS=m
 CONFIG_SCSI_IBMVSCSI=y
 CONFIG_SCSI_IBMVFC=m
-CONFIG_SCSI_SYM53C8XX_2=y
+CONFIG_SCSI_SYM53C8XX_2=m
 CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
 CONFIG_SCSI_IPR=y
 CONFIG_SCSI_QLA_FC=m
@@ -149,10 +151,10 @@
 CONFIG_TUN=m
 CONFIG_VIRTIO_NET=m
 CONFIG_VHOST_NET=m
-CONFIG_VORTEX=y
+CONFIG_VORTEX=m
 CONFIG_ACENIC=m
 CONFIG_ACENIC_OMIT_TIGON_I=y
-CONFIG_PCNET32=y
+CONFIG_PCNET32=m
 CONFIG_TIGON3=y
 CONFIG_BNX2X=m
 CONFIG_CHELSIO_T1=m
@@ -165,6 +167,7 @@
 CONFIG_E1000E=y
 CONFIG_IXGB=m
 CONFIG_IXGBE=m
+CONFIG_I40E=m
 CONFIG_MLX4_EN=m
 CONFIG_MYRI10GE=m
 CONFIG_PASEMI_MAC=y
@@ -269,7 +272,7 @@
 CONFIG_EXT4_FS=y
 CONFIG_EXT4_FS_POSIX_ACL=y
 CONFIG_EXT4_FS_SECURITY=y
-CONFIG_REISERFS_FS=y
+CONFIG_REISERFS_FS=m
 CONFIG_REISERFS_FS_XATTR=y
 CONFIG_REISERFS_FS_POSIX_ACL=y
 CONFIG_REISERFS_FS_SECURITY=y
@@ -284,10 +287,10 @@
 CONFIG_AUTOFS4_FS=m
 CONFIG_FUSE_FS=m
 CONFIG_OVERLAY_FS=m
-CONFIG_ISO9660_FS=y
+CONFIG_ISO9660_FS=m
 CONFIG_UDF_FS=m
 CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
+CONFIG_VFAT_FS=m
 CONFIG_PROC_KCORE=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
@@ -347,6 +350,8 @@
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_DEV_NX=y
 CONFIG_CRYPTO_DEV_NX_ENCRYPT=m
+CONFIG_CRYPTO_DEV_VMX=y
+CONFIG_CRYPTO_DEV_VMX_ENCRYPT=m
 CONFIG_VIRTUALIZATION=y
 CONFIG_KVM_BOOK3S_64=m
 CONFIG_KVM_BOOK3S_64_HV=m
diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig
index 654aeff..8a3bc01 100644
--- a/arch/powerpc/configs/pseries_defconfig
+++ b/arch/powerpc/configs/pseries_defconfig
@@ -15,6 +15,8 @@
 CONFIG_TASK_IO_ACCOUNTING=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=18
+CONFIG_LOG_CPU_MAX_BUF_SHIFT=13
 CONFIG_NUMA_BALANCING=y
 CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y
 CONFIG_CGROUPS=y
@@ -95,7 +97,7 @@
 CONFIG_BLK_DEV_GENERIC=y
 CONFIG_BLK_DEV_AMD74XX=y
 CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
+CONFIG_CHR_DEV_ST=m
 CONFIG_BLK_DEV_SR=y
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=y
@@ -108,7 +110,7 @@
 CONFIG_SCSI_MPT2SAS=m
 CONFIG_SCSI_IBMVSCSI=y
 CONFIG_SCSI_IBMVFC=m
-CONFIG_SCSI_SYM53C8XX_2=y
+CONFIG_SCSI_SYM53C8XX_2=m
 CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
 CONFIG_SCSI_IPR=y
 CONFIG_SCSI_QLA_FC=m
@@ -150,10 +152,10 @@
 CONFIG_VETH=m
 CONFIG_VIRTIO_NET=m
 CONFIG_VHOST_NET=m
-CONFIG_VORTEX=y
+CONFIG_VORTEX=m
 CONFIG_ACENIC=m
 CONFIG_ACENIC_OMIT_TIGON_I=y
-CONFIG_PCNET32=y
+CONFIG_PCNET32=m
 CONFIG_TIGON3=y
 CONFIG_BNX2X=m
 CONFIG_CHELSIO_T1=m
@@ -166,6 +168,7 @@
 CONFIG_E1000E=y
 CONFIG_IXGB=m
 CONFIG_IXGBE=m
+CONFIG_I40E=m
 CONFIG_MLX4_EN=m
 CONFIG_MYRI10GE=m
 CONFIG_QLGE=m
@@ -241,7 +244,7 @@
 CONFIG_EXT4_FS=y
 CONFIG_EXT4_FS_POSIX_ACL=y
 CONFIG_EXT4_FS_SECURITY=y
-CONFIG_REISERFS_FS=y
+CONFIG_REISERFS_FS=m
 CONFIG_REISERFS_FS_XATTR=y
 CONFIG_REISERFS_FS_POSIX_ACL=y
 CONFIG_REISERFS_FS_SECURITY=y
@@ -256,10 +259,10 @@
 CONFIG_AUTOFS4_FS=m
 CONFIG_FUSE_FS=m
 CONFIG_OVERLAY_FS=m
-CONFIG_ISO9660_FS=y
+CONFIG_ISO9660_FS=m
 CONFIG_UDF_FS=m
 CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
+CONFIG_VFAT_FS=m
 CONFIG_PROC_KCORE=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
@@ -314,6 +317,8 @@
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_DEV_NX=y
 CONFIG_CRYPTO_DEV_NX_ENCRYPT=m
+CONFIG_CRYPTO_DEV_VMX=y
+CONFIG_CRYPTO_DEV_VMX_ENCRYPT=m
 CONFIG_VIRTUALIZATION=y
 CONFIG_KVM_BOOK3S_64=m
 CONFIG_KVM_BOOK3S_64_HV=m
diff --git a/arch/powerpc/include/asm/asm-prototypes.h b/arch/powerpc/include/asm/asm-prototypes.h
index e71b909..d149273 100644
--- a/arch/powerpc/include/asm/asm-prototypes.h
+++ b/arch/powerpc/include/asm/asm-prototypes.h
@@ -15,6 +15,8 @@
 #include <linux/threads.h>
 #include <linux/kprobes.h>
 
+#include <uapi/asm/ucontext.h>
+
 /* SMP */
 extern struct thread_info *current_set[NR_CPUS];
 extern struct thread_info *secondary_ti;
@@ -52,8 +54,8 @@
 void handle_hmi_exception(struct pt_regs *regs);
 void instruction_breakpoint_exception(struct pt_regs *regs);
 void RunModeException(struct pt_regs *regs);
-void __kprobes single_step_exception(struct pt_regs *regs);
-void __kprobes program_check_exception(struct pt_regs *regs);
+void single_step_exception(struct pt_regs *regs);
+void program_check_exception(struct pt_regs *regs);
 void alignment_exception(struct pt_regs *regs);
 void StackOverflow(struct pt_regs *regs);
 void nonrecoverable_exception(struct pt_regs *regs);
@@ -70,6 +72,41 @@
 void kernel_bad_stack(struct pt_regs *regs);
 void system_reset_exception(struct pt_regs *regs);
 void machine_check_exception(struct pt_regs *regs);
-void __kprobes emulation_assist_interrupt(struct pt_regs *regs);
+void emulation_assist_interrupt(struct pt_regs *regs);
+
+/* signals, syscalls and interrupts */
+#ifdef CONFIG_PPC64
+int sys_swapcontext(struct ucontext __user *old_ctx,
+		    struct ucontext __user *new_ctx,
+		    long ctx_size, long r6, long r7, long r8, struct pt_regs *regs);
+#else
+long sys_swapcontext(struct ucontext __user *old_ctx,
+		    struct ucontext __user *new_ctx,
+		    int ctx_size, int r6, int r7, int r8, struct pt_regs *regs);
+#endif
+long sys_switch_endian(void);
+notrace unsigned int __check_irq_replay(void);
+void notrace restore_interrupts(void);
+
+/* ptrace */
+long do_syscall_trace_enter(struct pt_regs *regs);
+void do_syscall_trace_leave(struct pt_regs *regs);
+
+/* process */
+void restore_math(struct pt_regs *regs);
+void restore_tm_state(struct pt_regs *regs);
+
+/* prom_init (OpenFirmware) */
+unsigned long __init prom_init(unsigned long r3, unsigned long r4,
+			       unsigned long pp,
+			       unsigned long r6, unsigned long r7,
+			       unsigned long kbase);
+
+/* setup */
+void __init early_setup(unsigned long dt_ptr);
+void early_setup_secondary(void);
+
+/* time */
+void accumulate_stolen_time(void);
 
 #endif /* _ASM_POWERPC_ASM_PROTOTYPES_H */
diff --git a/arch/powerpc/include/asm/atomic.h b/arch/powerpc/include/asm/atomic.h
index f08d567..2b90335 100644
--- a/arch/powerpc/include/asm/atomic.h
+++ b/arch/powerpc/include/asm/atomic.h
@@ -233,7 +233,7 @@
 	PPC_ATOMIC_ENTRY_BARRIER
 "1:	lwarx	%0,0,%1		# __atomic_add_unless\n\
 	cmpw	0,%0,%3 \n\
-	beq-	2f \n\
+	beq	2f \n\
 	add	%0,%2,%0 \n"
 	PPC405_ERR77(0,%2)
 "	stwcx.	%0,0,%1 \n\
@@ -539,7 +539,7 @@
 	PPC_ATOMIC_ENTRY_BARRIER
 "1:	ldarx	%0,0,%1		# __atomic_add_unless\n\
 	cmpd	0,%0,%3 \n\
-	beq-	2f \n\
+	beq	2f \n\
 	add	%0,%2,%0 \n"
 "	stdcx.	%0,0,%1 \n\
 	bne-	1b \n"
diff --git a/arch/powerpc/include/asm/book3s/32/pgtable.h b/arch/powerpc/include/asm/book3s/32/pgtable.h
index 38b33dc..6b8b2d5 100644
--- a/arch/powerpc/include/asm/book3s/32/pgtable.h
+++ b/arch/powerpc/include/asm/book3s/32/pgtable.h
@@ -223,7 +223,8 @@
 }
 
 
-static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry)
+static inline void __ptep_set_access_flags(struct mm_struct *mm,
+					   pte_t *ptep, pte_t entry)
 {
 	unsigned long set = pte_val(entry) &
 		(_PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_RW | _PAGE_EXEC);
diff --git a/arch/powerpc/include/asm/book3s/64/pgtable.h b/arch/powerpc/include/asm/book3s/64/pgtable.h
index 263bf39..9fd77f8 100644
--- a/arch/powerpc/include/asm/book3s/64/pgtable.h
+++ b/arch/powerpc/include/asm/book3s/64/pgtable.h
@@ -6,6 +6,8 @@
  */
 #define _PAGE_BIT_SWAP_TYPE	0
 
+#define _PAGE_RO		0
+
 #define _PAGE_EXEC		0x00001 /* execute permission */
 #define _PAGE_WRITE		0x00002 /* write access allowed */
 #define _PAGE_READ		0x00004	/* read access allowed */
@@ -565,10 +567,11 @@
  * Generic functions with hash/radix callbacks
  */
 
-static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry)
+static inline void __ptep_set_access_flags(struct mm_struct *mm,
+					   pte_t *ptep, pte_t entry)
 {
 	if (radix_enabled())
-		return radix__ptep_set_access_flags(ptep, entry);
+		return radix__ptep_set_access_flags(mm, ptep, entry);
 	return hash__ptep_set_access_flags(ptep, entry);
 }
 
diff --git a/arch/powerpc/include/asm/book3s/64/radix.h b/arch/powerpc/include/asm/book3s/64/radix.h
index df29422..2a46dea 100644
--- a/arch/powerpc/include/asm/book3s/64/radix.h
+++ b/arch/powerpc/include/asm/book3s/64/radix.h
@@ -11,6 +11,11 @@
 #include <asm/book3s/64/radix-4k.h>
 #endif
 
+#ifndef __ASSEMBLY__
+#include <asm/book3s/64/tlbflush-radix.h>
+#include <asm/cpu_has_feature.h>
+#endif
+
 /* An empty PTE can still have a R or C writeback */
 #define RADIX_PTE_NONE_MASK		(_PAGE_DIRTY | _PAGE_ACCESSED)
 
@@ -105,11 +110,8 @@
 #define RADIX_PUD_TABLE_SIZE	(sizeof(pud_t) << RADIX_PUD_INDEX_SIZE)
 #define RADIX_PGD_TABLE_SIZE	(sizeof(pgd_t) << RADIX_PGD_INDEX_SIZE)
 
-static inline unsigned long radix__pte_update(struct mm_struct *mm,
-					unsigned long addr,
-					pte_t *ptep, unsigned long clr,
-					unsigned long set,
-					int huge)
+static inline unsigned long __radix_pte_update(pte_t *ptep, unsigned long clr,
+					       unsigned long set)
 {
 	pte_t pte;
 	unsigned long old_pte, new_pte;
@@ -121,9 +123,39 @@
 
 	} while (!pte_xchg(ptep, __pte(old_pte), __pte(new_pte)));
 
-	/* We already do a sync in cmpxchg, is ptesync needed ?*/
+	return old_pte;
+}
+
+
+static inline unsigned long radix__pte_update(struct mm_struct *mm,
+					unsigned long addr,
+					pte_t *ptep, unsigned long clr,
+					unsigned long set,
+					int huge)
+{
+	unsigned long old_pte;
+
+	if (cpu_has_feature(CPU_FTR_POWER9_DD1)) {
+
+		unsigned long new_pte;
+
+		old_pte = __radix_pte_update(ptep, ~0, 0);
+		asm volatile("ptesync" : : : "memory");
+		/*
+		 * new value of pte
+		 */
+		new_pte = (old_pte | set) & ~clr;
+
+		/*
+		 * For now let's do heavy pid flush
+		 * radix__flush_tlb_page_psize(mm, addr, mmu_virtual_psize);
+		 */
+		radix__flush_tlb_mm(mm);
+
+		__radix_pte_update(ptep, 0, new_pte);
+	} else
+		old_pte = __radix_pte_update(ptep, clr, set);
 	asm volatile("ptesync" : : : "memory");
-	/* huge pages use the old page table lock */
 	if (!huge)
 		assert_pte_locked(mm, addr);
 
@@ -134,20 +166,33 @@
  * Set the dirty and/or accessed bits atomically in a linux PTE, this
  * function doesn't need to invalidate tlb.
  */
-static inline void radix__ptep_set_access_flags(pte_t *ptep, pte_t entry)
+static inline void radix__ptep_set_access_flags(struct mm_struct *mm,
+						pte_t *ptep, pte_t entry)
 {
-	pte_t pte;
-	unsigned long old_pte, new_pte;
+
 	unsigned long set = pte_val(entry) & (_PAGE_DIRTY | _PAGE_ACCESSED |
 					      _PAGE_RW | _PAGE_EXEC);
-	do {
-		pte = READ_ONCE(*ptep);
-		old_pte = pte_val(pte);
+
+	if (cpu_has_feature(CPU_FTR_POWER9_DD1)) {
+
+		unsigned long old_pte, new_pte;
+
+		old_pte = __radix_pte_update(ptep, ~0, 0);
+		asm volatile("ptesync" : : : "memory");
+		/*
+		 * new value of pte
+		 */
 		new_pte = old_pte | set;
 
-	} while (!pte_xchg(ptep, __pte(old_pte), __pte(new_pte)));
+		/*
+		 * For now let's do heavy pid flush
+		 * radix__flush_tlb_page_psize(mm, addr, mmu_virtual_psize);
+		 */
+		radix__flush_tlb_mm(mm);
 
-	/* We already do a sync in cmpxchg, is ptesync needed ?*/
+		__radix_pte_update(ptep, 0, new_pte);
+	} else
+		__radix_pte_update(ptep, 0, set);
 	asm volatile("ptesync" : : : "memory");
 }
 
@@ -233,14 +278,19 @@
 {
 	unsigned long rts_field;
 	/*
-	 * we support 52 bits, hence 52-31 = 21, 0b10101
+	 * We support 52 bits, hence:
+	 *  DD1    52-28 = 24, 0b11000
+	 *  Others 52-31 = 21, 0b10101
 	 * RTS encoding details
 	 * bits 0 - 3 of rts -> bits 6 - 8 unsigned long
 	 * bits 4 - 5 of rts -> bits 62 - 63 of unsigned long
 	 */
-	rts_field = (0x5UL << 5); /* 6 - 8 bits */
-	rts_field |= (0x2UL << 61);
-
+	if (cpu_has_feature(CPU_FTR_POWER9_DD1))
+		rts_field = (0x3UL << 61);
+	else {
+		rts_field = (0x5UL << 5); /* 6 - 8 bits */
+		rts_field |= (0x2UL << 61);
+	}
 	return rts_field;
 }
 #endif /* __ASSEMBLY__ */
diff --git a/arch/powerpc/include/asm/book3s/64/tlbflush-radix.h b/arch/powerpc/include/asm/book3s/64/tlbflush-radix.h
index 6503776..a9e19cb 100644
--- a/arch/powerpc/include/asm/book3s/64/tlbflush-radix.h
+++ b/arch/powerpc/include/asm/book3s/64/tlbflush-radix.h
@@ -41,4 +41,5 @@
 extern void radix__flush_tlb_lpid_va(unsigned long lpid, unsigned long gpa,
 				     unsigned long page_size);
 extern void radix__flush_tlb_lpid(unsigned long lpid);
+extern void radix__flush_tlb_all(void);
 #endif
diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h
index 82026b4..f752e6f 100644
--- a/arch/powerpc/include/asm/cputable.h
+++ b/arch/powerpc/include/asm/cputable.h
@@ -212,6 +212,7 @@
 #define CPU_FTR_DABRX			LONG_ASM_CONST(0x0800000000000000)
 #define CPU_FTR_PMAO_BUG		LONG_ASM_CONST(0x1000000000000000)
 #define CPU_FTR_SUBCORE			LONG_ASM_CONST(0x2000000000000000)
+#define CPU_FTR_POWER9_DD1		LONG_ASM_CONST(0x4000000000000000)
 
 #ifndef __ASSEMBLY__
 
@@ -472,6 +473,7 @@
 	    CPU_FTR_ICSWX | CPU_FTR_CFAR | CPU_FTR_HVMODE | CPU_FTR_VMX_COPY | \
 	    CPU_FTR_DBELL | CPU_FTR_HAS_PPR | CPU_FTR_DAWR | \
 	    CPU_FTR_ARCH_207S | CPU_FTR_TM_COMP | CPU_FTR_ARCH_300)
+#define CPU_FTRS_POWER9_DD1 (CPU_FTRS_POWER9 | CPU_FTR_POWER9_DD1)
 #define CPU_FTRS_CELL	(CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
 	    CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
 	    CPU_FTR_ALTIVEC_COMP | CPU_FTR_MMCRA | CPU_FTR_SMT | \
@@ -490,7 +492,7 @@
 	    (CPU_FTRS_POWER4 | CPU_FTRS_PPC970 | CPU_FTRS_POWER5 | \
 	     CPU_FTRS_POWER6 | CPU_FTRS_POWER7 | CPU_FTRS_POWER8E | \
 	     CPU_FTRS_POWER8 | CPU_FTRS_POWER8_DD1 | CPU_FTRS_CELL | \
-	     CPU_FTRS_PA6T | CPU_FTR_VSX | CPU_FTRS_POWER9)
+	     CPU_FTRS_PA6T | CPU_FTR_VSX | CPU_FTRS_POWER9 | CPU_FTRS_POWER9_DD1)
 #endif
 #else
 enum {
diff --git a/arch/powerpc/include/asm/exception-64s.h b/arch/powerpc/include/asm/exception-64s.h
index bed66e5..2e4e7d8 100644
--- a/arch/powerpc/include/asm/exception-64s.h
+++ b/arch/powerpc/include/asm/exception-64s.h
@@ -34,6 +34,7 @@
  * exception handlers (including pSeries LPAR) and iSeries LPAR
  * implementations as possible.
  */
+#include <asm/head-64.h>
 
 #define EX_R9		0
 #define EX_R10		8
@@ -52,7 +53,6 @@
 
 #ifdef CONFIG_RELOCATABLE
 #define __EXCEPTION_RELON_PROLOG_PSERIES_1(label, h)			\
-	ld	r12,PACAKBASE(r13);	/* get high part of &label */	\
 	mfspr	r11,SPRN_##h##SRR0;	/* save SRR0 */			\
 	LOAD_HANDLER(r12,label);					\
 	mtctr	r12;							\
@@ -84,13 +84,14 @@
 
 /*
  * We're short on space and time in the exception prolog, so we can't
- * use the normal SET_REG_IMMEDIATE macro. Normally we just need the
- * low halfword of the address, but for Kdump we need the whole low
- * word.
+ * use the normal LOAD_REG_IMMEDIATE macro to load the address of label.
+ * Instead we get the base of the kernel from paca->kernelbase and or in the low
+ * part of label. This requires that the label be within 64KB of kernelbase, and
+ * that kernelbase be 64K aligned.
  */
 #define LOAD_HANDLER(reg, label)					\
-	/* Handlers must be within 64K of kbase, which must be 64k aligned */ \
-	ori	reg,reg,(label)-_stext;	/* virt addr of handler ... */
+	ld	reg,PACAKBASE(r13);	/* get high part of &label */	\
+	ori	reg,reg,(FIXED_SYMBOL_ABS_ADDR(label))@l;
 
 /* Exception register prefixes */
 #define EXC_HV	H
@@ -175,7 +176,6 @@
 	__EXCEPTION_PROLOG_1(area, extra, vec)
 
 #define __EXCEPTION_PROLOG_PSERIES_1(label, h)				\
-	ld	r12,PACAKBASE(r13);	/* get high part of &label */	\
 	ld	r10,PACAKMSR(r13);	/* get MSR value for kernel */	\
 	mfspr	r11,SPRN_##h##SRR0;	/* save SRR0 */			\
 	LOAD_HANDLER(r12,label)						\
@@ -192,10 +192,10 @@
 	EXCEPTION_PROLOG_1(area, extra, vec);				\
 	EXCEPTION_PROLOG_PSERIES_1(label, h);
 
-#define __KVMTEST(n)							\
-	lbz	r10,HSTATE_IN_GUEST(r13);			\
+#define __KVMTEST(h, n)							\
+	lbz	r10,HSTATE_IN_GUEST(r13);				\
 	cmpwi	r10,0;							\
-	bne	do_kvm_##n
+	bne	do_kvm_##h##n
 
 #ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
 /*
@@ -208,8 +208,7 @@
 #define kvmppc_interrupt kvmppc_interrupt_pr
 #endif
 
-#define __KVM_HANDLER(area, h, n)					\
-do_kvm_##n:								\
+#define __KVM_HANDLER_PROLOG(area, n)					\
 	BEGIN_FTR_SECTION_NESTED(947)					\
 	ld	r10,area+EX_CFAR(r13);					\
 	std	r10,HSTATE_CFAR(r13);					\
@@ -222,21 +221,23 @@
 	stw	r9,HSTATE_SCRATCH1(r13);				\
 	ld	r9,area+EX_R9(r13);					\
 	std	r12,HSTATE_SCRATCH0(r13);				\
+
+#define __KVM_HANDLER(area, h, n)					\
+	__KVM_HANDLER_PROLOG(area, n)					\
 	li	r12,n;							\
 	b	kvmppc_interrupt
 
 #define __KVM_HANDLER_SKIP(area, h, n)					\
-do_kvm_##n:								\
 	cmpwi	r10,KVM_GUEST_MODE_SKIP;				\
 	ld	r10,area+EX_R10(r13);					\
 	beq	89f;							\
-	stw	r9,HSTATE_SCRATCH1(r13);			\
+	stw	r9,HSTATE_SCRATCH1(r13);				\
 	BEGIN_FTR_SECTION_NESTED(948)					\
 	ld	r9,area+EX_PPR(r13);					\
 	std	r9,HSTATE_PPR(r13);					\
 	END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948);	\
 	ld	r9,area+EX_R9(r13);					\
-	std	r12,HSTATE_SCRATCH0(r13);			\
+	std	r12,HSTATE_SCRATCH0(r13);				\
 	li	r12,n;							\
 	b	kvmppc_interrupt;					\
 89:	mtocrf	0x80,r9;						\
@@ -244,12 +245,12 @@
 	b	kvmppc_skip_##h##interrupt
 
 #ifdef CONFIG_KVM_BOOK3S_64_HANDLER
-#define KVMTEST(n)			__KVMTEST(n)
+#define KVMTEST(h, n)			__KVMTEST(h, n)
 #define KVM_HANDLER(area, h, n)		__KVM_HANDLER(area, h, n)
 #define KVM_HANDLER_SKIP(area, h, n)	__KVM_HANDLER_SKIP(area, h, n)
 
 #else
-#define KVMTEST(n)
+#define KVMTEST(h, n)
 #define KVM_HANDLER(area, h, n)
 #define KVM_HANDLER_SKIP(area, h, n)
 #endif
@@ -333,94 +334,79 @@
 /*
  * Exception vectors.
  */
-#define STD_EXCEPTION_PSERIES(vec, label)		\
-	. = vec;					\
-	.globl label##_pSeries;				\
-label##_pSeries:					\
+#define STD_EXCEPTION_PSERIES(vec, label)			\
 	SET_SCRATCH0(r13);		/* save r13 */		\
-	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common,	\
-				 EXC_STD, KVMTEST, vec)
+	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label,		\
+				 EXC_STD, KVMTEST_PR, vec);	\
 
 /* Version of above for when we have to branch out-of-line */
+#define __OOL_EXCEPTION(vec, label, hdlr)			\
+	SET_SCRATCH0(r13)					\
+	EXCEPTION_PROLOG_0(PACA_EXGEN)				\
+	b hdlr;
+
 #define STD_EXCEPTION_PSERIES_OOL(vec, label)			\
-	.globl label##_pSeries;					\
-label##_pSeries:						\
-	EXCEPTION_PROLOG_1(PACA_EXGEN, KVMTEST, vec);	\
-	EXCEPTION_PROLOG_PSERIES_1(label##_common, EXC_STD)
+	EXCEPTION_PROLOG_1(PACA_EXGEN, KVMTEST_PR, vec);	\
+	EXCEPTION_PROLOG_PSERIES_1(label, EXC_STD)
 
-#define STD_EXCEPTION_HV(loc, vec, label)		\
-	. = loc;					\
-	.globl label##_hv;				\
-label##_hv:						\
+#define STD_EXCEPTION_HV(loc, vec, label)			\
 	SET_SCRATCH0(r13);	/* save r13 */			\
-	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common,	\
-				 EXC_HV, KVMTEST, vec)
+	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label,		\
+				 EXC_HV, KVMTEST_HV, vec);
 
-/* Version of above for when we have to branch out-of-line */
-#define STD_EXCEPTION_HV_OOL(vec, label)		\
-	.globl label##_hv;				\
-label##_hv:						\
-	EXCEPTION_PROLOG_1(PACA_EXGEN, KVMTEST, vec);	\
-	EXCEPTION_PROLOG_PSERIES_1(label##_common, EXC_HV)
+#define STD_EXCEPTION_HV_OOL(vec, label)			\
+	EXCEPTION_PROLOG_1(PACA_EXGEN, KVMTEST_HV, vec);	\
+	EXCEPTION_PROLOG_PSERIES_1(label, EXC_HV)
 
 #define STD_RELON_EXCEPTION_PSERIES(loc, vec, label)	\
-	. = loc;					\
-	.globl label##_relon_pSeries;			\
-label##_relon_pSeries:					\
 	/* No guest interrupts come through here */	\
 	SET_SCRATCH0(r13);		/* save r13 */	\
-	EXCEPTION_RELON_PROLOG_PSERIES(PACA_EXGEN, label##_common, \
-				       EXC_STD, NOTEST, vec)
+	EXCEPTION_RELON_PROLOG_PSERIES(PACA_EXGEN, label, EXC_STD, NOTEST, vec);
 
 #define STD_RELON_EXCEPTION_PSERIES_OOL(vec, label)		\
-	.globl label##_relon_pSeries;				\
-label##_relon_pSeries:						\
 	EXCEPTION_PROLOG_1(PACA_EXGEN, NOTEST, vec);		\
-	EXCEPTION_RELON_PROLOG_PSERIES_1(label##_common, EXC_STD)
+	EXCEPTION_RELON_PROLOG_PSERIES_1(label, EXC_STD)
 
 #define STD_RELON_EXCEPTION_HV(loc, vec, label)		\
-	. = loc;					\
-	.globl label##_relon_hv;			\
-label##_relon_hv:					\
 	/* No guest interrupts come through here */	\
 	SET_SCRATCH0(r13);	/* save r13 */		\
-	EXCEPTION_RELON_PROLOG_PSERIES(PACA_EXGEN, label##_common, \
-				       EXC_HV, NOTEST, vec)
+	EXCEPTION_RELON_PROLOG_PSERIES(PACA_EXGEN, label, EXC_HV, NOTEST, vec);
 
 #define STD_RELON_EXCEPTION_HV_OOL(vec, label)			\
-	.globl label##_relon_hv;				\
-label##_relon_hv:						\
 	EXCEPTION_PROLOG_1(PACA_EXGEN, NOTEST, vec);		\
-	EXCEPTION_RELON_PROLOG_PSERIES_1(label##_common, EXC_HV)
+	EXCEPTION_RELON_PROLOG_PSERIES_1(label, EXC_HV)
 
 /* This associate vector numbers with bits in paca->irq_happened */
 #define SOFTEN_VALUE_0x500	PACA_IRQ_EE
-#define SOFTEN_VALUE_0x502	PACA_IRQ_EE
 #define SOFTEN_VALUE_0x900	PACA_IRQ_DEC
-#define SOFTEN_VALUE_0x982	PACA_IRQ_DEC
+#define SOFTEN_VALUE_0x980	PACA_IRQ_DEC
 #define SOFTEN_VALUE_0xa00	PACA_IRQ_DBELL
 #define SOFTEN_VALUE_0xe80	PACA_IRQ_DBELL
-#define SOFTEN_VALUE_0xe82	PACA_IRQ_DBELL
 #define SOFTEN_VALUE_0xe60	PACA_IRQ_HMI
-#define SOFTEN_VALUE_0xe62	PACA_IRQ_HMI
 #define SOFTEN_VALUE_0xea0	PACA_IRQ_EE
-#define SOFTEN_VALUE_0xea2	PACA_IRQ_EE
 
 #define __SOFTEN_TEST(h, vec)						\
 	lbz	r10,PACASOFTIRQEN(r13);					\
 	cmpwi	r10,0;							\
 	li	r10,SOFTEN_VALUE_##vec;					\
 	beq	masked_##h##interrupt
+
 #define _SOFTEN_TEST(h, vec)	__SOFTEN_TEST(h, vec)
 
 #define SOFTEN_TEST_PR(vec)						\
-	KVMTEST(vec);							\
+	KVMTEST(EXC_STD, vec);						\
 	_SOFTEN_TEST(EXC_STD, vec)
 
 #define SOFTEN_TEST_HV(vec)						\
-	KVMTEST(vec);							\
+	KVMTEST(EXC_HV, vec);						\
 	_SOFTEN_TEST(EXC_HV, vec)
 
+#define KVMTEST_PR(vec)							\
+	KVMTEST(EXC_STD, vec)
+
+#define KVMTEST_HV(vec)							\
+	KVMTEST(EXC_HV, vec)
+
 #define SOFTEN_NOTEST_PR(vec)		_SOFTEN_TEST(EXC_STD, vec)
 #define SOFTEN_NOTEST_HV(vec)		_SOFTEN_TEST(EXC_HV, vec)
 
@@ -428,58 +414,47 @@
 	SET_SCRATCH0(r13);    /* save r13 */				\
 	EXCEPTION_PROLOG_0(PACA_EXGEN);					\
 	__EXCEPTION_PROLOG_1(PACA_EXGEN, extra, vec);			\
-	EXCEPTION_PROLOG_PSERIES_1(label##_common, h);
+	EXCEPTION_PROLOG_PSERIES_1(label, h);
 
 #define _MASKABLE_EXCEPTION_PSERIES(vec, label, h, extra)		\
 	__MASKABLE_EXCEPTION_PSERIES(vec, label, h, extra)
 
 #define MASKABLE_EXCEPTION_PSERIES(loc, vec, label)			\
-	. = loc;							\
-	.globl label##_pSeries;						\
-label##_pSeries:							\
 	_MASKABLE_EXCEPTION_PSERIES(vec, label,				\
 				    EXC_STD, SOFTEN_TEST_PR)
 
+#define MASKABLE_EXCEPTION_PSERIES_OOL(vec, label)			\
+	EXCEPTION_PROLOG_1(PACA_EXGEN, SOFTEN_TEST_PR, vec);		\
+	EXCEPTION_PROLOG_PSERIES_1(label, EXC_STD)
+
 #define MASKABLE_EXCEPTION_HV(loc, vec, label)				\
-	. = loc;							\
-	.globl label##_hv;						\
-label##_hv:								\
 	_MASKABLE_EXCEPTION_PSERIES(vec, label,				\
 				    EXC_HV, SOFTEN_TEST_HV)
 
 #define MASKABLE_EXCEPTION_HV_OOL(vec, label)				\
-	.globl label##_hv;						\
-label##_hv:								\
 	EXCEPTION_PROLOG_1(PACA_EXGEN, SOFTEN_TEST_HV, vec);		\
-	EXCEPTION_PROLOG_PSERIES_1(label##_common, EXC_HV);
+	EXCEPTION_PROLOG_PSERIES_1(label, EXC_HV)
 
 #define __MASKABLE_RELON_EXCEPTION_PSERIES(vec, label, h, extra)	\
 	SET_SCRATCH0(r13);    /* save r13 */				\
 	EXCEPTION_PROLOG_0(PACA_EXGEN);					\
-	__EXCEPTION_PROLOG_1(PACA_EXGEN, extra, vec);		\
-	EXCEPTION_RELON_PROLOG_PSERIES_1(label##_common, h);
-#define _MASKABLE_RELON_EXCEPTION_PSERIES(vec, label, h, extra)	\
+	__EXCEPTION_PROLOG_1(PACA_EXGEN, extra, vec);			\
+	EXCEPTION_RELON_PROLOG_PSERIES_1(label, h)
+
+#define _MASKABLE_RELON_EXCEPTION_PSERIES(vec, label, h, extra)		\
 	__MASKABLE_RELON_EXCEPTION_PSERIES(vec, label, h, extra)
 
 #define MASKABLE_RELON_EXCEPTION_PSERIES(loc, vec, label)		\
-	. = loc;							\
-	.globl label##_relon_pSeries;					\
-label##_relon_pSeries:							\
 	_MASKABLE_RELON_EXCEPTION_PSERIES(vec, label,			\
 					  EXC_STD, SOFTEN_NOTEST_PR)
 
 #define MASKABLE_RELON_EXCEPTION_HV(loc, vec, label)			\
-	. = loc;							\
-	.globl label##_relon_hv;					\
-label##_relon_hv:							\
 	_MASKABLE_RELON_EXCEPTION_PSERIES(vec, label,			\
 					  EXC_HV, SOFTEN_NOTEST_HV)
 
 #define MASKABLE_RELON_EXCEPTION_HV_OOL(vec, label)			\
-	.globl label##_relon_hv;					\
-label##_relon_hv:							\
 	EXCEPTION_PROLOG_1(PACA_EXGEN, SOFTEN_NOTEST_HV, vec);		\
-	EXCEPTION_PROLOG_PSERIES_1(label##_common, EXC_HV);
+	EXCEPTION_PROLOG_PSERIES_1(label, EXC_HV)
 
 /*
  * Our exception common code can be passed various "additions"
@@ -505,9 +480,6 @@
 END_FTR_SECTION_IFSET(CPU_FTR_CTRL)
 
 #define EXCEPTION_COMMON(trap, label, hdlr, ret, additions)	\
-	.align	7;						\
-	.globl label##_common;					\
-label##_common:							\
 	EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN);		\
 	/* Volatile regs are potentially clobbered here */	\
 	additions;						\
diff --git a/arch/powerpc/include/asm/fadump.h b/arch/powerpc/include/asm/fadump.h
index b4407d0..0031806 100644
--- a/arch/powerpc/include/asm/fadump.h
+++ b/arch/powerpc/include/asm/fadump.h
@@ -45,10 +45,6 @@
 
 #define memblock_num_regions(memblock_type)	(memblock.memblock_type.cnt)
 
-#ifndef ELF_CORE_EFLAGS
-#define ELF_CORE_EFLAGS 0
-#endif
-
 /* Firmware provided dump sections */
 #define FADUMP_CPU_STATE_DATA	0x0001
 #define FADUMP_HPTE_REGION	0x0002
diff --git a/arch/powerpc/include/asm/head-64.h b/arch/powerpc/include/asm/head-64.h
new file mode 100644
index 0000000..ab90c2f
--- /dev/null
+++ b/arch/powerpc/include/asm/head-64.h
@@ -0,0 +1,393 @@
+#ifndef _ASM_POWERPC_HEAD_64_H
+#define _ASM_POWERPC_HEAD_64_H
+
+#include <asm/cache.h>
+
+/*
+ * We can't do CPP stringification and concatination directly into the section
+ * name for some reason, so these macros can do it for us.
+ */
+.macro define_ftsec name
+	.section ".head.text.\name\()","ax",@progbits
+.endm
+.macro define_data_ftsec name
+	.section ".head.data.\name\()","a",@progbits
+.endm
+.macro use_ftsec name
+	.section ".head.text.\name\()"
+.endm
+
+/*
+ * Fixed (location) sections are used by opening fixed sections and emitting
+ * fixed section entries into them before closing them. Multiple fixed sections
+ * can be open at any time.
+ *
+ * Each fixed section created in a .S file must have corresponding linkage
+ * directives including location, added to  arch/powerpc/kernel/vmlinux.lds.S
+ *
+ * For each fixed section, code is generated into it in the order which it
+ * appears in the source.  Fixed section entries can be placed at a fixed
+ * location within the section using _LOCATION postifx variants. These must
+ * be ordered according to their relative placements within the section.
+ *
+ * OPEN_FIXED_SECTION(section_name, start_address, end_address)
+ * FIXED_SECTION_ENTRY_BEGIN(section_name, label1)
+ *
+ * USE_FIXED_SECTION(section_name)
+ * label3:
+ *     li  r10,128
+ *     mv  r11,r10
+
+ * FIXED_SECTION_ENTRY_BEGIN_LOCATION(section_name, label2, start_address)
+ * FIXED_SECTION_ENTRY_END_LOCATION(section_name, label2, end_address)
+ * CLOSE_FIXED_SECTION(section_name)
+ *
+ * ZERO_FIXED_SECTION can be used to emit zeroed data.
+ *
+ * Troubleshooting:
+ * - If the build dies with "Error: attempt to move .org backwards" at
+ *   CLOSE_FIXED_SECTION() or elsewhere, there may be something
+ *   unexpected being added there. Remove the '. = x_len' line, rebuild, and
+ *   check what is pushing the section down.
+ * - If the build dies in linking, check arch/powerpc/kernel/vmlinux.lds.S
+ *   for instructions.
+ * - If the kernel crashes or hangs in very early boot, it could be linker
+ *   stubs at the start of the main text.
+ */
+
+#define OPEN_FIXED_SECTION(sname, start, end)			\
+	sname##_start = (start);				\
+	sname##_end = (end);					\
+	sname##_len = (end) - (start);				\
+	define_ftsec sname;					\
+	. = 0x0;						\
+start_##sname:
+
+#define OPEN_TEXT_SECTION(start)				\
+	text_start = (start);					\
+	.section ".text","ax",@progbits;			\
+	. = 0x0;						\
+start_text:
+
+#define ZERO_FIXED_SECTION(sname, start, end)			\
+	sname##_start = (start);				\
+	sname##_end = (end);					\
+	sname##_len = (end) - (start);				\
+	define_data_ftsec sname;				\
+	. = 0x0;						\
+	. = sname##_len;
+
+#define USE_FIXED_SECTION(sname)				\
+	fs_label = start_##sname;				\
+	fs_start = sname##_start;				\
+	use_ftsec sname;
+
+#define USE_TEXT_SECTION()					\
+	fs_label = start_text;					\
+	fs_start = text_start;					\
+	.text
+
+#define CLOSE_FIXED_SECTION(sname)				\
+	USE_FIXED_SECTION(sname);				\
+	. = sname##_len;					\
+end_##sname:
+
+
+#define __FIXED_SECTION_ENTRY_BEGIN(sname, name, __align)	\
+	USE_FIXED_SECTION(sname);				\
+	.align __align;						\
+	.global name;						\
+name:
+
+#define FIXED_SECTION_ENTRY_BEGIN(sname, name)			\
+	__FIXED_SECTION_ENTRY_BEGIN(sname, name, 0)
+
+#define FIXED_SECTION_ENTRY_BEGIN_LOCATION(sname, name, start)		\
+	USE_FIXED_SECTION(sname);				\
+	name##_start = (start);					\
+	.if (start) < sname##_start;				\
+	.error "Fixed section underflow";			\
+	.abort;							\
+	.endif;							\
+	. = (start) - sname##_start;				\
+	.global name;						\
+name:
+
+#define FIXED_SECTION_ENTRY_END_LOCATION(sname, name, end)		\
+	.if (end) > sname##_end;				\
+	.error "Fixed section overflow";			\
+	.abort;							\
+	.endif;							\
+	.if (. - name > end - name##_start);			\
+	.error "Fixed entry overflow";				\
+	.abort;							\
+	.endif;							\
+	. = ((end) - sname##_start);				\
+
+
+/*
+ * These macros are used to change symbols in other fixed sections to be
+ * absolute or related to our current fixed section.
+ *
+ * - DEFINE_FIXED_SYMBOL / FIXED_SYMBOL_ABS_ADDR is used to find the
+ *   absolute address of a symbol within a fixed section, from any section.
+ *
+ * - ABS_ADDR is used to find the absolute address of any symbol, from within
+ *   a fixed section.
+ */
+#define DEFINE_FIXED_SYMBOL(label)				\
+	label##_absolute = (label - fs_label + fs_start)
+
+#define FIXED_SYMBOL_ABS_ADDR(label)				\
+	(label##_absolute)
+
+#define ABS_ADDR(label) (label - fs_label + fs_start)
+
+/*
+ * Following are the BOOK3S exception handler helper macros.
+ * Handlers come in a number of types, and each type has a number of varieties.
+ *
+ * EXC_REAL_*        - real, unrelocated exception vectors
+ * EXC_VIRT_*        - virt (AIL), unrelocated exception vectors
+ * TRAMP_REAL_*   - real, unrelocated helpers (virt can call these)
+ * TRAMP_VIRT_*  - virt, unreloc helpers (in practice, real can use)
+ * TRAMP_KVM         - KVM handlers that get put into real, unrelocated
+ * EXC_COMMON_*  - virt, relocated common handlers
+ *
+ * The EXC handlers are given a name, and branch to name_common, or the
+ * appropriate KVM or masking function. Vector handler verieties are as
+ * follows:
+ *
+ * EXC_{REAL|VIRT}_BEGIN/END - used to open-code the exception
+ *
+ * EXC_{REAL|VIRT}  - standard exception
+ *
+ * EXC_{REAL|VIRT}_suffix
+ *     where _suffix is:
+ *   - _MASKABLE               - maskable exception
+ *   - _OOL                    - out of line with trampoline to common handler
+ *   - _HV                     - HV exception
+ *
+ * There can be combinations, e.g., EXC_VIRT_OOL_MASKABLE_HV
+ *
+ * The one unusual case is __EXC_REAL_OOL_HV_DIRECT, which is
+ * an OOL vector that branches to a specified handler rather than the usual
+ * trampoline that goes to common. It, and other underscore macros, should
+ * be used with care.
+ *
+ * KVM handlers come in the following verieties:
+ * TRAMP_KVM
+ * TRAMP_KVM_SKIP
+ * TRAMP_KVM_HV
+ * TRAMP_KVM_HV_SKIP
+ *
+ * COMMON handlers come in the following verieties:
+ * EXC_COMMON_BEGIN/END - used to open-code the handler
+ * EXC_COMMON
+ * EXC_COMMON_ASYNC
+ * EXC_COMMON_HV
+ *
+ * TRAMP_REAL and TRAMP_VIRT can be used with BEGIN/END. KVM
+ * and OOL handlers are implemented as types of TRAMP and TRAMP_VIRT handlers.
+ */
+
+#define EXC_REAL_BEGIN(name, start, end)			\
+	FIXED_SECTION_ENTRY_BEGIN_LOCATION(real_vectors, exc_real_##start##_##name, start)
+
+#define EXC_REAL_END(name, start, end)			\
+	FIXED_SECTION_ENTRY_END_LOCATION(real_vectors, exc_real_##start##_##name, end)
+
+#define EXC_VIRT_BEGIN(name, start, end)			\
+	FIXED_SECTION_ENTRY_BEGIN_LOCATION(virt_vectors, exc_virt_##start##_##name, start)
+
+#define EXC_VIRT_END(name, start, end)			\
+	FIXED_SECTION_ENTRY_END_LOCATION(virt_vectors, exc_virt_##start##_##name, end)
+
+#define EXC_COMMON_BEGIN(name)					\
+	USE_TEXT_SECTION();						\
+	.align	7;							\
+	.global name;							\
+	DEFINE_FIXED_SYMBOL(name);					\
+name:
+
+#define TRAMP_REAL_BEGIN(name)					\
+	FIXED_SECTION_ENTRY_BEGIN(real_trampolines, name)
+
+#define TRAMP_VIRT_BEGIN(name)					\
+	FIXED_SECTION_ENTRY_BEGIN(virt_trampolines, name)
+
+#ifdef CONFIG_KVM_BOOK3S_64_HANDLER
+#define TRAMP_KVM_BEGIN(name)						\
+	TRAMP_REAL_BEGIN(name)
+#else
+#define TRAMP_KVM_BEGIN(name)
+#endif
+
+#define EXC_REAL_NONE(start, end)				\
+	FIXED_SECTION_ENTRY_BEGIN_LOCATION(real_vectors, exc_real_##start##_##unused, start); \
+	FIXED_SECTION_ENTRY_END_LOCATION(real_vectors, exc_real_##start##_##unused, end)
+
+#define EXC_VIRT_NONE(start, end)				\
+	FIXED_SECTION_ENTRY_BEGIN_LOCATION(virt_vectors, exc_virt_##start##_##unused, start); \
+	FIXED_SECTION_ENTRY_END_LOCATION(virt_vectors, exc_virt_##start##_##unused, end);
+
+
+#define EXC_REAL(name, start, end)				\
+	EXC_REAL_BEGIN(name, start, end);			\
+	STD_EXCEPTION_PSERIES(start, name##_common);			\
+	EXC_REAL_END(name, start, end);
+
+#define EXC_VIRT(name, start, end, realvec)			\
+	EXC_VIRT_BEGIN(name, start, end);			\
+	STD_RELON_EXCEPTION_PSERIES(start, realvec, name##_common);	\
+	EXC_VIRT_END(name, start, end);
+
+#define EXC_REAL_MASKABLE(name, start, end)			\
+	EXC_REAL_BEGIN(name, start, end);			\
+	MASKABLE_EXCEPTION_PSERIES(start, start, name##_common);	\
+	EXC_REAL_END(name, start, end);
+
+#define EXC_VIRT_MASKABLE(name, start, end, realvec)		\
+	EXC_VIRT_BEGIN(name, start, end);			\
+	MASKABLE_RELON_EXCEPTION_PSERIES(start, realvec, name##_common); \
+	EXC_VIRT_END(name, start, end);
+
+#define EXC_REAL_HV(name, start, end)			\
+	EXC_REAL_BEGIN(name, start, end);			\
+	STD_EXCEPTION_HV(start, start, name##_common);			\
+	EXC_REAL_END(name, start, end);
+
+#define EXC_VIRT_HV(name, start, end, realvec)		\
+	EXC_VIRT_BEGIN(name, start, end);			\
+	STD_RELON_EXCEPTION_HV(start, realvec, name##_common);		\
+	EXC_VIRT_END(name, start, end);
+
+#define __EXC_REAL_OOL(name, start, end)			\
+	EXC_REAL_BEGIN(name, start, end);			\
+	__OOL_EXCEPTION(start, label, tramp_real_##name);		\
+	EXC_REAL_END(name, start, end);
+
+#define __TRAMP_REAL_REAL_OOL(name, vec)				\
+	TRAMP_REAL_BEGIN(tramp_real_##name);				\
+	STD_EXCEPTION_PSERIES_OOL(vec, name##_common);			\
+
+#define EXC_REAL_OOL(name, start, end)			\
+	__EXC_REAL_OOL(name, start, end);			\
+	__TRAMP_REAL_REAL_OOL(name, start);
+
+#define __EXC_REAL_OOL_MASKABLE(name, start, end)		\
+	__EXC_REAL_OOL(name, start, end);
+
+#define __TRAMP_REAL_REAL_OOL_MASKABLE(name, vec)			\
+	TRAMP_REAL_BEGIN(tramp_real_##name);				\
+	MASKABLE_EXCEPTION_PSERIES_OOL(vec, name##_common);		\
+
+#define EXC_REAL_OOL_MASKABLE(name, start, end)		\
+	__EXC_REAL_OOL_MASKABLE(name, start, end);		\
+	__TRAMP_REAL_REAL_OOL_MASKABLE(name, start);
+
+#define __EXC_REAL_OOL_HV_DIRECT(name, start, end, handler)	\
+	EXC_REAL_BEGIN(name, start, end);			\
+	__OOL_EXCEPTION(start, label, handler);				\
+	EXC_REAL_END(name, start, end);
+
+#define __EXC_REAL_OOL_HV(name, start, end)			\
+	__EXC_REAL_OOL(name, start, end);
+
+#define __TRAMP_REAL_REAL_OOL_HV(name, vec)				\
+	TRAMP_REAL_BEGIN(tramp_real_##name);				\
+	STD_EXCEPTION_HV_OOL(vec, name##_common);			\
+
+#define EXC_REAL_OOL_HV(name, start, end)			\
+	__EXC_REAL_OOL_HV(name, start, end);			\
+	__TRAMP_REAL_REAL_OOL_HV(name, start);
+
+#define __EXC_REAL_OOL_MASKABLE_HV(name, start, end)		\
+	__EXC_REAL_OOL(name, start, end);
+
+#define __TRAMP_REAL_REAL_OOL_MASKABLE_HV(name, vec)			\
+	TRAMP_REAL_BEGIN(tramp_real_##name);				\
+	MASKABLE_EXCEPTION_HV_OOL(vec, name##_common);			\
+
+#define EXC_REAL_OOL_MASKABLE_HV(name, start, end)		\
+	__EXC_REAL_OOL_MASKABLE_HV(name, start, end);	\
+	__TRAMP_REAL_REAL_OOL_MASKABLE_HV(name, start);
+
+#define __EXC_VIRT_OOL(name, start, end)			\
+	EXC_VIRT_BEGIN(name, start, end);			\
+	__OOL_EXCEPTION(start, label, tramp_virt_##name);		\
+	EXC_VIRT_END(name, start, end);
+
+#define __TRAMP_REAL_VIRT_OOL(name, realvec)				\
+	TRAMP_VIRT_BEGIN(tramp_virt_##name);			\
+	STD_RELON_EXCEPTION_PSERIES_OOL(realvec, name##_common);	\
+
+#define EXC_VIRT_OOL(name, start, end, realvec)		\
+	__EXC_VIRT_OOL(name, start, end);			\
+	__TRAMP_REAL_VIRT_OOL(name, realvec);
+
+#define __EXC_VIRT_OOL_MASKABLE(name, start, end)		\
+	__EXC_VIRT_OOL(name, start, end);
+
+#define __TRAMP_REAL_VIRT_OOL_MASKABLE(name, realvec)		\
+	TRAMP_VIRT_BEGIN(tramp_virt_##name);			\
+	MASKABLE_RELON_EXCEPTION_PSERIES_OOL(realvec, name##_common);	\
+
+#define EXC_VIRT_OOL_MASKABLE(name, start, end, realvec)	\
+	__EXC_VIRT_OOL_MASKABLE(name, start, end);		\
+	__TRAMP_REAL_VIRT_OOL_MASKABLE(name, realvec);
+
+#define __EXC_VIRT_OOL_HV(name, start, end)			\
+	__EXC_VIRT_OOL(name, start, end);
+
+#define __TRAMP_REAL_VIRT_OOL_HV(name, realvec)			\
+	TRAMP_VIRT_BEGIN(tramp_virt_##name);			\
+	STD_RELON_EXCEPTION_HV_OOL(realvec, name##_common);		\
+
+#define EXC_VIRT_OOL_HV(name, start, end, realvec)		\
+	__EXC_VIRT_OOL_HV(name, start, end);			\
+	__TRAMP_REAL_VIRT_OOL_HV(name, realvec);
+
+#define __EXC_VIRT_OOL_MASKABLE_HV(name, start, end)		\
+	__EXC_VIRT_OOL(name, start, end);
+
+#define __TRAMP_REAL_VIRT_OOL_MASKABLE_HV(name, realvec)		\
+	TRAMP_VIRT_BEGIN(tramp_virt_##name);			\
+	MASKABLE_RELON_EXCEPTION_HV_OOL(realvec, name##_common);	\
+
+#define EXC_VIRT_OOL_MASKABLE_HV(name, start, end, realvec)	\
+	__EXC_VIRT_OOL_MASKABLE_HV(name, start, end);	\
+	__TRAMP_REAL_VIRT_OOL_MASKABLE_HV(name, realvec);
+
+#define TRAMP_KVM(area, n)						\
+	TRAMP_KVM_BEGIN(do_kvm_##n);					\
+	KVM_HANDLER(area, EXC_STD, n);					\
+
+#define TRAMP_KVM_SKIP(area, n)						\
+	TRAMP_KVM_BEGIN(do_kvm_##n);					\
+	KVM_HANDLER_SKIP(area, EXC_STD, n);				\
+
+/*
+ * HV variant exceptions get the 0x2 bit added to their trap number.
+ */
+#define TRAMP_KVM_HV(area, n)						\
+	TRAMP_KVM_BEGIN(do_kvm_H##n);					\
+	KVM_HANDLER(area, EXC_HV, n + 0x2);				\
+
+#define TRAMP_KVM_HV_SKIP(area, n)					\
+	TRAMP_KVM_BEGIN(do_kvm_H##n);					\
+	KVM_HANDLER_SKIP(area, EXC_HV, n + 0x2);			\
+
+#define EXC_COMMON(name, realvec, hdlr)				\
+	EXC_COMMON_BEGIN(name);					\
+	STD_EXCEPTION_COMMON(realvec, name, hdlr);			\
+
+#define EXC_COMMON_ASYNC(name, realvec, hdlr)			\
+	EXC_COMMON_BEGIN(name);					\
+	STD_EXCEPTION_COMMON_ASYNC(realvec, name, hdlr);		\
+
+#define EXC_COMMON_HV(name, realvec, hdlr)				\
+	EXC_COMMON_BEGIN(name);					\
+	STD_EXCEPTION_COMMON(realvec + 0x2, name, hdlr);		\
+
+#endif	/* _ASM_POWERPC_HEAD_64_H */
diff --git a/arch/powerpc/include/asm/machdep.h b/arch/powerpc/include/asm/machdep.h
index 0420b38..e02cbc6 100644
--- a/arch/powerpc/include/asm/machdep.h
+++ b/arch/powerpc/include/asm/machdep.h
@@ -61,7 +61,7 @@
 
 	void		(*init_IRQ)(void);
 
-	/* Return an irq, or NO_IRQ to indicate there are none pending. */
+	/* Return an irq, or 0 to indicate there are none pending. */
 	unsigned int	(*get_irq)(void);
 
 	/* PCI stuff */
diff --git a/arch/powerpc/include/asm/mmu-book3e.h b/arch/powerpc/include/asm/mmu-book3e.h
index cd4f04a..b62a8d4 100644
--- a/arch/powerpc/include/asm/mmu-book3e.h
+++ b/arch/powerpc/include/asm/mmu-book3e.h
@@ -313,6 +313,9 @@
  * return 1, indicating that the tlb requires preloading.
  */
 #define HUGETLB_NEED_PRELOAD
+
+#define mmu_cleanup_all NULL
+
 #endif
 
 #endif /* !__ASSEMBLY__ */
diff --git a/arch/powerpc/include/asm/mmu.h b/arch/powerpc/include/asm/mmu.h
index b78e8d3..e883683 100644
--- a/arch/powerpc/include/asm/mmu.h
+++ b/arch/powerpc/include/asm/mmu.h
@@ -204,6 +204,10 @@
  * make it match the size our of bolted TLB area
  */
 extern u64 ppc64_rma_size;
+
+/* Cleanup function used by kexec */
+extern void mmu_cleanup_all(void);
+extern void radix__mmu_cleanup_all(void);
 #endif /* CONFIG_PPC64 */
 
 struct mm_struct;
diff --git a/arch/powerpc/include/asm/mmu_context.h b/arch/powerpc/include/asm/mmu_context.h
index 9d2cd0c..5c45114 100644
--- a/arch/powerpc/include/asm/mmu_context.h
+++ b/arch/powerpc/include/asm/mmu_context.h
@@ -18,6 +18,7 @@
 #ifdef CONFIG_SPAPR_TCE_IOMMU
 struct mm_iommu_table_group_mem_t;
 
+extern int isolate_lru_page(struct page *page);	/* from internal.h */
 extern bool mm_iommu_preregistered(void);
 extern long mm_iommu_get(unsigned long ua, unsigned long entries,
 		struct mm_iommu_table_group_mem_t **pmem);
@@ -71,7 +72,8 @@
 			     struct task_struct *tsk)
 {
 	/* Mark this context has been used on the new CPU */
-	cpumask_set_cpu(smp_processor_id(), mm_cpumask(next));
+	if (!cpumask_test_cpu(smp_processor_id(), mm_cpumask(next)))
+		cpumask_set_cpu(smp_processor_id(), mm_cpumask(next));
 
 	/* 32-bit keeps track of the current PGDIR in the thread struct */
 #ifdef CONFIG_PPC32
diff --git a/arch/powerpc/include/asm/mpic_msgr.h b/arch/powerpc/include/asm/mpic_msgr.h
index d4f471f..088420d 100644
--- a/arch/powerpc/include/asm/mpic_msgr.h
+++ b/arch/powerpc/include/asm/mpic_msgr.h
@@ -122,9 +122,9 @@
  * @msgr:	the message register whose IRQ is to be returned
  *
  * Returns the IRQ number associated with the given message register.
- * NO_IRQ is returned if this message register is not capable of
- * receiving interrupts.  What message register can and cannot receive
- * interrupts is specified in the device tree for the system.
+ * 0 is returned if this message register is not capable of receiving
+ * interrupts.  What message register can and cannot receive interrupts is
+ * specified in the device tree for the system.
  */
 static inline int mpic_msgr_get_irq(struct mpic_msgr *msgr)
 {
diff --git a/arch/powerpc/include/asm/nohash/32/pgtable.h b/arch/powerpc/include/asm/nohash/32/pgtable.h
index 7808475..c219ef7 100644
--- a/arch/powerpc/include/asm/nohash/32/pgtable.h
+++ b/arch/powerpc/include/asm/nohash/32/pgtable.h
@@ -267,7 +267,8 @@
 }
 
 
-static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry)
+static inline void __ptep_set_access_flags(struct mm_struct *mm,
+					   pte_t *ptep, pte_t entry)
 {
 	unsigned long set = pte_val(entry) &
 		(_PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_RW | _PAGE_EXEC);
diff --git a/arch/powerpc/include/asm/nohash/64/pgtable.h b/arch/powerpc/include/asm/nohash/64/pgtable.h
index d4d808c..653a183 100644
--- a/arch/powerpc/include/asm/nohash/64/pgtable.h
+++ b/arch/powerpc/include/asm/nohash/64/pgtable.h
@@ -300,7 +300,8 @@
 /* Set the dirty and/or accessed bits atomically in a linux PTE, this
  * function doesn't need to flush the hash entry
  */
-static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry)
+static inline void __ptep_set_access_flags(struct mm_struct *mm,
+					   pte_t *ptep, pte_t entry)
 {
 	unsigned long bits = pte_val(entry) &
 		(_PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_RW | _PAGE_EXEC);
diff --git a/arch/powerpc/include/asm/parport.h b/arch/powerpc/include/asm/parport.h
index a452968..6595ad1 100644
--- a/arch/powerpc/include/asm/parport.h
+++ b/arch/powerpc/include/asm/parport.h
@@ -28,7 +28,7 @@
 		io1 = prop[1]; io2 = prop[2];
 
 		virq = irq_of_parse_and_map(np, 0);
-		if (virq == NO_IRQ)
+		if (!virq)
 			continue;
 
 		if (parport_pc_probe_port(io1, io2, virq, autodma, NULL, 0)
diff --git a/arch/powerpc/include/asm/pnv-pci.h b/arch/powerpc/include/asm/pnv-pci.h
index 1b46b52..696438f 100644
--- a/arch/powerpc/include/asm/pnv-pci.h
+++ b/arch/powerpc/include/asm/pnv-pci.h
@@ -16,7 +16,7 @@
 #include <misc/cxl-base.h>
 #include <asm/opal-api.h>
 
-#define PCI_SLOT_ID_PREFIX	0x8000000000000000
+#define PCI_SLOT_ID_PREFIX	(1UL << 63)
 #define PCI_SLOT_ID(phb_id, bdfn)	\
 	(PCI_SLOT_ID_PREFIX | ((uint64_t)(bdfn) << 16) | (phb_id))
 
@@ -63,6 +63,8 @@
 #define PNV_PHP_STATE_POPULATED		2
 #define PNV_PHP_STATE_OFFLINE		3
 	int				state;
+	int				irq;
+	struct workqueue_struct		*wq;
 	struct device_node		*dn;
 	struct pci_dev			*pdev;
 	struct pci_bus			*bus;
diff --git a/arch/powerpc/include/asm/ppc-opcode.h b/arch/powerpc/include/asm/ppc-opcode.h
index 127ebf5..54ff8ce 100644
--- a/arch/powerpc/include/asm/ppc-opcode.h
+++ b/arch/powerpc/include/asm/ppc-opcode.h
@@ -236,6 +236,7 @@
 #define PPC_INST_STWU			0x94000000
 #define PPC_INST_MFLR			0x7c0802a6
 #define PPC_INST_MTLR			0x7c0803a6
+#define PPC_INST_MTCTR			0x7c0903a6
 #define PPC_INST_CMPWI			0x2c000000
 #define PPC_INST_CMPDI			0x2c200000
 #define PPC_INST_CMPW			0x7c000000
@@ -250,6 +251,7 @@
 #define PPC_INST_SUB			0x7c000050
 #define PPC_INST_BLR			0x4e800020
 #define PPC_INST_BLRL			0x4e800021
+#define PPC_INST_BCTR			0x4e800420
 #define PPC_INST_MULLD			0x7c0001d2
 #define PPC_INST_MULLW			0x7c0001d6
 #define PPC_INST_MULHWU			0x7c000016
diff --git a/arch/powerpc/include/asm/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h
index d5d5b5e..c73750b 100644
--- a/arch/powerpc/include/asm/ppc_asm.h
+++ b/arch/powerpc/include/asm/ppc_asm.h
@@ -201,14 +201,12 @@
 #ifdef PPC64_ELF_ABI_v2
 
 #define _GLOBAL(name) \
-	.section ".text"; \
 	.align 2 ; \
 	.type name,@function; \
 	.globl name; \
 name:
 
 #define _GLOBAL_TOC(name) \
-	.section ".text"; \
 	.align 2 ; \
 	.type name,@function; \
 	.globl name; \
@@ -217,13 +215,6 @@
 	addi r2,r2,(.TOC.-0b)@l; \
 	.localentry name,.-name
 
-#define _KPROBE(name) \
-	.section ".kprobes.text","a"; \
-	.align 2 ; \
-	.type name,@function; \
-	.globl name; \
-name:
-
 #define DOTSYM(a)	a
 
 #else
@@ -232,35 +223,20 @@
 #define GLUE(a,b) XGLUE(a,b)
 
 #define _GLOBAL(name) \
-	.section ".text"; \
 	.align 2 ; \
 	.globl name; \
 	.globl GLUE(.,name); \
-	.section ".opd","aw"; \
+	.pushsection ".opd","aw"; \
 name: \
 	.quad GLUE(.,name); \
 	.quad .TOC.@tocbase; \
 	.quad 0; \
-	.previous; \
+	.popsection; \
 	.type GLUE(.,name),@function; \
 GLUE(.,name):
 
 #define _GLOBAL_TOC(name) _GLOBAL(name)
 
-#define _KPROBE(name) \
-	.section ".kprobes.text","a"; \
-	.align 2 ; \
-	.globl name; \
-	.globl GLUE(.,name); \
-	.section ".opd","aw"; \
-name: \
-	.quad GLUE(.,name); \
-	.quad .TOC.@tocbase; \
-	.quad 0; \
-	.previous; \
-	.type GLUE(.,name),@function; \
-GLUE(.,name):
-
 #define DOTSYM(a)	GLUE(.,a)
 
 #endif
@@ -272,20 +248,28 @@
 n:
 
 #define _GLOBAL(n)	\
-	.text;		\
 	.stabs __stringify(n:F-1),N_FUN,0,0,n;\
 	.globl n;	\
 n:
 
 #define _GLOBAL_TOC(name) _GLOBAL(name)
 
-#define _KPROBE(n)	\
-	.section ".kprobes.text","a";	\
-	.globl	n;	\
-n:
-
 #endif
 
+/*
+ * __kprobes (the C annotation) puts the symbol into the .kprobes.text
+ * section, which gets emitted at the end of regular text.
+ *
+ * _ASM_NOKPROBE_SYMBOL and NOKPROBE_SYMBOL just adds the symbol to
+ * a blacklist. The former is for core kprobe functions/data, the
+ * latter is for those that incdentially must be excluded from probing
+ * and allows them to be linked at more optimal location within text.
+ */
+#define _ASM_NOKPROBE_SYMBOL(entry)			\
+	.pushsection "_kprobe_blacklist","aw";		\
+	PPC_LONG (entry) ;				\
+	.popsection
+
 #define FUNC_START(name)	_GLOBAL(name)
 #define FUNC_END(name)
 
@@ -527,7 +511,6 @@
 #endif
 #define MTMSRD(r)	mtmsr	r
 #define MTMSR_EERI(reg)	mtmsr	reg
-#define CLR_TOP32(r)
 #endif
 
 #endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index 68e3bf5..c07c31b 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -147,7 +147,7 @@
 } mm_segment_t;
 
 #define TS_FPR(i) fp_state.fpr[i][TS_FPROFFSET]
-#define TS_TRANS_FPR(i) transact_fp.fpr[i][TS_FPROFFSET]
+#define TS_CKFPR(i) ckfp_state.fpr[i][TS_FPROFFSET]
 
 /* FP and VSX 0-31 register set */
 struct thread_fp_state {
@@ -257,6 +257,7 @@
 	int		used_spe;	/* set if process has used spe */
 #endif /* CONFIG_SPE */
 #ifdef CONFIG_PPC_TRANSACTIONAL_MEM
+	u8	load_tm;
 	u64		tm_tfhar;	/* Transaction fail handler addr */
 	u64		tm_texasr;	/* Transaction exception & summary */
 	u64		tm_tfiar;	/* Transaction fail instr address reg */
@@ -267,20 +268,17 @@
 	unsigned long	tm_dscr;
 
 	/*
-	 * Transactional FP and VSX 0-31 register set.
-	 * NOTE: the sense of these is the opposite of the integer ckpt_regs!
+	 * Checkpointed FP and VSX 0-31 register set.
 	 *
 	 * When a transaction is active/signalled/scheduled etc., *regs is the
 	 * most recent set of/speculated GPRs with ckpt_regs being the older
 	 * checkpointed regs to which we roll back if transaction aborts.
 	 *
-	 * However, fpr[] is the checkpointed 'base state' of FP regs, and
-	 * transact_fpr[] is the new set of transactional values.
-	 * VRs work the same way.
+	 * These are analogous to how ckpt_regs and pt_regs work
 	 */
-	struct thread_fp_state transact_fp;
-	struct thread_vr_state transact_vr;
-	unsigned long	transact_vrsave;
+	struct thread_fp_state ckfp_state; /* Checkpointed FP state */
+	struct thread_vr_state ckvr_state; /* Checkpointed VR state */
+	unsigned long	ckvrsave; /* Checkpointed VRSAVE */
 #endif /* CONFIG_PPC_TRANSACTIONAL_MEM */
 #ifdef CONFIG_KVM_BOOK3S_32_HANDLER
 	void*		kvm_shadow_vcpu; /* KVM internal data */
diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index 978dada..2a62078 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -475,6 +475,9 @@
 #define HID0_POWER8_1TO4LPAR	__MASK(51)
 #define HID0_POWER8_DYNLPARDIS	__MASK(48)
 
+/* POWER9 HID0 bits */
+#define HID0_POWER9_RADIX	__MASK(63 - 8)
+
 #define SPRN_HID1	0x3F1		/* Hardware Implementation Register 1 */
 #ifdef CONFIG_6xx
 #define HID1_EMCP	(1<<31)		/* 7450 Machine Check Pin Enable */
@@ -1248,7 +1251,7 @@
 				     : "memory")
 #endif
 
-extern void msr_check_and_set(unsigned long bits);
+extern unsigned long msr_check_and_set(unsigned long bits);
 extern bool strict_msr_control;
 extern void __msr_check_and_clear(unsigned long bits);
 static inline void msr_check_and_clear(unsigned long bits)
diff --git a/arch/powerpc/include/asm/signal.h b/arch/powerpc/include/asm/signal.h
index 9322c28..5ff7772 100644
--- a/arch/powerpc/include/asm/signal.h
+++ b/arch/powerpc/include/asm/signal.h
@@ -5,6 +5,4 @@
 #include <uapi/asm/signal.h>
 #include <uapi/asm/ptrace.h>
 
-extern unsigned long get_tm_stackpointer(struct pt_regs *regs);
-
 #endif /* _ASM_POWERPC_SIGNAL_H */
diff --git a/arch/powerpc/include/asm/tm.h b/arch/powerpc/include/asm/tm.h
index c22d704..82e06ca 100644
--- a/arch/powerpc/include/asm/tm.h
+++ b/arch/powerpc/include/asm/tm.h
@@ -9,11 +9,6 @@
 
 #ifndef __ASSEMBLY__
 
-#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
-extern void do_load_up_transact_fpu(struct thread_struct *thread);
-extern void do_load_up_transact_altivec(struct thread_struct *thread);
-#endif
-
 extern void tm_enable(void);
 extern void tm_reclaim(struct thread_struct *thread,
 		       unsigned long orig_msr, uint8_t cause);
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index fe4c075..aded29a 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -31,8 +31,7 @@
 				   process.o systbl.o idle.o \
 				   signal.o sysfs.o cacheinfo.o time.o \
 				   prom.o traps.o setup-common.o \
-				   udbg.o misc.o io.o dma.o \
-				   misc_$(CONFIG_WORD_SIZE).o \
+				   udbg.o misc.o io.o dma.o misc_$(BITS).o \
 				   of_platform.o prom_parse.o
 obj-$(CONFIG_PPC64)		+= setup_64.o sys_ppc32.o \
 				   signal_64.o ptrace32.o \
@@ -70,23 +69,23 @@
 ifeq ($(CONFIG_FSL_BOOKE),y)
 obj-$(CONFIG_HIBERNATION)	+= swsusp_booke.o
 else
-obj-$(CONFIG_HIBERNATION)	+= swsusp_$(CONFIG_WORD_SIZE).o
+obj-$(CONFIG_HIBERNATION)	+= swsusp_$(BITS).o
 endif
 obj64-$(CONFIG_HIBERNATION)	+= swsusp_asm64.o
-obj-$(CONFIG_MODULES)		+= module.o module_$(CONFIG_WORD_SIZE).o
+obj-$(CONFIG_MODULES)		+= module.o module_$(BITS).o
 obj-$(CONFIG_44x)		+= cpu_setup_44x.o
 obj-$(CONFIG_PPC_FSL_BOOK3E)	+= cpu_setup_fsl_booke.o
 obj-$(CONFIG_PPC_DOORBELL)	+= dbell.o
 obj-$(CONFIG_JUMP_LABEL)	+= jump_label.o
 
-extra-y				:= head_$(CONFIG_WORD_SIZE).o
+extra-y				:= head_$(BITS).o
 extra-$(CONFIG_40x)		:= head_40x.o
 extra-$(CONFIG_44x)		:= head_44x.o
 extra-$(CONFIG_FSL_BOOKE)	:= head_fsl_booke.o
 extra-$(CONFIG_8xx)		:= head_8xx.o
 extra-y				+= vmlinux.lds
 
-obj-$(CONFIG_RELOCATABLE)	+= reloc_$(CONFIG_WORD_SIZE).o
+obj-$(CONFIG_RELOCATABLE)	+= reloc_$(BITS).o
 
 obj-$(CONFIG_PPC32)		+= entry_32.o setup_32.o
 obj-$(CONFIG_PPC64)		+= dma-iommu.o iommu.o
@@ -104,11 +103,11 @@
 obj-$(CONFIG_SWIOTLB)		+= dma-swiotlb.o
 
 pci64-$(CONFIG_PPC64)		+= pci_dn.o pci-hotplug.o isa-bridge.o
-obj-$(CONFIG_PCI)		+= pci_$(CONFIG_WORD_SIZE).o $(pci64-y) \
+obj-$(CONFIG_PCI)		+= pci_$(BITS).o $(pci64-y) \
 				   pci-common.o pci_of_scan.o
 obj-$(CONFIG_PCI_MSI)		+= msi.o
 obj-$(CONFIG_KEXEC)		+= machine_kexec.o crash.o \
-				   machine_kexec_$(CONFIG_WORD_SIZE).o
+				   machine_kexec_$(BITS).o
 obj-$(CONFIG_AUDIT)		+= audit.o
 obj64-$(CONFIG_AUDIT)		+= compat_audit.o
 
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index a51ae9b..caec7bf 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -142,12 +142,12 @@
 	DEFINE(THREAD_TM_PPR, offsetof(struct thread_struct, tm_ppr));
 	DEFINE(THREAD_TM_DSCR, offsetof(struct thread_struct, tm_dscr));
 	DEFINE(PT_CKPT_REGS, offsetof(struct thread_struct, ckpt_regs));
-	DEFINE(THREAD_TRANSACT_VRSTATE, offsetof(struct thread_struct,
-						 transact_vr));
-	DEFINE(THREAD_TRANSACT_VRSAVE, offsetof(struct thread_struct,
-					    transact_vrsave));
-	DEFINE(THREAD_TRANSACT_FPSTATE, offsetof(struct thread_struct,
-						 transact_fp));
+	DEFINE(THREAD_CKVRSTATE, offsetof(struct thread_struct,
+						 ckvr_state));
+	DEFINE(THREAD_CKVRSAVE, offsetof(struct thread_struct,
+					    ckvrsave));
+	DEFINE(THREAD_CKFPSTATE, offsetof(struct thread_struct,
+						 ckfp_state));
 	/* Local pt_regs on stack for Transactional Memory funcs. */
 	DEFINE(TM_FRAME_SIZE, STACK_FRAME_OVERHEAD +
 	       sizeof(struct pt_regs) + 16);
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index 74248ab..6c4646a 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -506,6 +506,25 @@
 		.machine_check_early	= __machine_check_early_realmode_p8,
 		.platform		= "power8",
 	},
+	{	/* Power9 DD1*/
+		.pvr_mask		= 0xffffff00,
+		.pvr_value		= 0x004e0100,
+		.cpu_name		= "POWER9 (raw)",
+		.cpu_features		= CPU_FTRS_POWER9_DD1,
+		.cpu_user_features	= COMMON_USER_POWER9,
+		.cpu_user_features2	= COMMON_USER2_POWER9,
+		.mmu_features		= MMU_FTRS_POWER9,
+		.icache_bsize		= 128,
+		.dcache_bsize		= 128,
+		.num_pmcs		= 6,
+		.pmc_type		= PPC_PMC_IBM,
+		.oprofile_cpu_type	= "ppc64/power9",
+		.oprofile_type		= PPC_OPROFILE_INVALID,
+		.cpu_setup		= __setup_cpu_power9,
+		.cpu_restore		= __restore_cpu_power9,
+		.flush_tlb		= __flush_tlb_power9,
+		.platform		= "power9",
+	},
 	{	/* Power9 */
 		.pvr_mask		= 0xffff0000,
 		.pvr_value		= 0x004e0000,
diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c
index 7429556..f257316 100644
--- a/arch/powerpc/kernel/eeh.c
+++ b/arch/powerpc/kernel/eeh.c
@@ -116,6 +116,7 @@
 
 /* Lock to avoid races due to multiple reports of an error */
 DEFINE_RAW_SPINLOCK(confirm_error_lock);
+EXPORT_SYMBOL_GPL(confirm_error_lock);
 
 /* Lock to protect passed flags */
 static DEFINE_MUTEX(eeh_dev_mutex);
@@ -1044,7 +1045,7 @@
 	if (eeh_enabled())
 		pr_info("EEH: PCI Enhanced I/O Error Handling Enabled\n");
 	else
-		pr_warn("EEH: No capable adapters found\n");
+		pr_info("EEH: No capable adapters found\n");
 
 	return ret;
 }
@@ -1502,6 +1503,7 @@
 		break;
 	case EEH_OPT_THAW_MMIO:
 	case EEH_OPT_THAW_DMA:
+	case EEH_OPT_FREEZE_PE:
 		if (!eeh_ops || !eeh_ops->set_option) {
 			ret = -ENOENT;
 			break;
diff --git a/arch/powerpc/kernel/eeh_driver.c b/arch/powerpc/kernel/eeh_driver.c
index 5f36e8a..a62be72 100644
--- a/arch/powerpc/kernel/eeh_driver.c
+++ b/arch/powerpc/kernel/eeh_driver.c
@@ -993,9 +993,17 @@
 
 				/* Notify all devices to be down */
 				eeh_pe_state_clear(pe, EEH_PE_PRI_BUS);
-				bus = eeh_pe_bus_get(phb_pe);
 				eeh_pe_dev_traverse(pe,
 					eeh_report_failure, NULL);
+				bus = eeh_pe_bus_get(phb_pe);
+				if (!bus) {
+					pr_err("%s: Cannot find PCI bus for "
+					       "PHB#%d-PE#%x\n",
+					       __func__,
+					       pe->phb->global_number,
+					       pe->addr);
+					break;
+				}
 				pci_hp_remove_devices(bus);
 			}
 			pci_unlock_rescan_remove();
diff --git a/arch/powerpc/kernel/eeh_pe.c b/arch/powerpc/kernel/eeh_pe.c
index f0520da..de7d091 100644
--- a/arch/powerpc/kernel/eeh_pe.c
+++ b/arch/powerpc/kernel/eeh_pe.c
@@ -581,6 +581,7 @@
 {
 	eeh_pe_traverse(pe, __eeh_pe_state_mark, &state);
 }
+EXPORT_SYMBOL_GPL(eeh_pe_state_mark);
 
 static void *__eeh_pe_dev_mode_mark(void *data, void *flag)
 {
diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index 9899032..83428a2 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -654,7 +654,6 @@
 #endif /* CONFIG_SMP */
 
 	tophys(r0,r4)
-	CLR_TOP32(r0)
 	mtspr	SPRN_SPRG_THREAD,r0	/* Update current THREAD phys addr */
 	lwz	r1,KSP(r4)	/* Load new stack pointer */
 
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index 5afd03e..51df82b 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -139,7 +139,7 @@
 #ifdef CONFIG_PPC_BOOK3E
 	wrteei	1
 #else
-	ld	r11,PACAKMSR(r13)
+	li	r11,MSR_RI
 	ori	r11,r11,MSR_EE
 	mtmsrd	r11,1
 #endif /* CONFIG_PPC_BOOK3E */
@@ -195,7 +195,6 @@
 #ifdef CONFIG_PPC_BOOK3E
 	wrteei	0
 #else
-	ld	r10,PACAKMSR(r13)
 	/*
 	 * For performance reasons we clear RI the same time that we
 	 * clear EE. We only need to clear RI just before we restore r13
@@ -203,8 +202,7 @@
 	 * We have to be careful to restore RI if we branch anywhere from
 	 * here (eg syscall_exit_work).
 	 */
-	li	r9,MSR_RI
-	andc	r11,r10,r9
+	li	r11,0
 	mtmsrd	r11,1
 #endif /* CONFIG_PPC_BOOK3E */
 
@@ -221,13 +219,12 @@
 #endif
 2:	addi    r3,r1,STACK_FRAME_OVERHEAD
 #ifdef CONFIG_PPC_BOOK3S
+	li	r10,MSR_RI
 	mtmsrd	r10,1		/* Restore RI */
 #endif
 	bl	restore_math
 #ifdef CONFIG_PPC_BOOK3S
-	ld	r10,PACAKMSR(r13)
-	li	r9,MSR_RI
-	andc	r11,r10,r9 /* Re-clear RI */
+	li	r11,0
 	mtmsrd	r11,1
 #endif
 	ld	r8,_MSR(r1)
@@ -308,6 +305,7 @@
 	
 syscall_exit_work:
 #ifdef CONFIG_PPC_BOOK3S
+	li	r10,MSR_RI
 	mtmsrd	r10,1		/* Restore RI */
 #endif
 	/* If TIF_RESTOREALL is set, don't scribble on either r3 or ccr.
@@ -354,7 +352,7 @@
 #ifdef CONFIG_PPC_BOOK3E
 	wrteei	1
 #else
-	ld	r10,PACAKMSR(r13)
+	li	r10,MSR_RI
 	ori	r10,r10,MSR_EE
 	mtmsrd	r10,1
 #endif /* CONFIG_PPC_BOOK3E */
@@ -619,7 +617,7 @@
 #ifdef CONFIG_PPC_BOOK3E
 	wrteei	0
 #else
-	ld	r10,PACAKMSR(r13) /* Get kernel MSR without EE */
+	li	r10,MSR_RI
 	mtmsrd	r10,1		  /* Update machine state */
 #endif /* CONFIG_PPC_BOOK3E */
 
@@ -751,7 +749,7 @@
 #ifdef CONFIG_PPC_BOOK3E
 	wrteei	0
 #else
-	ld	r10,PACAKMSR(r13) /* Get kernel MSR without EE */
+	li	r10,MSR_RI
 	mtmsrd	r10,1		  /* Update machine state */
 #endif /* CONFIG_PPC_BOOK3E */
 #endif /* CONFIG_PREEMPT */
@@ -841,8 +839,7 @@
 	 * userspace and we take an exception after restoring r13,
 	 * we end up corrupting the userspace r13 value.
 	 */
-	ld	r4,PACAKMSR(r13) /* Get kernel MSR without EE */
-	andc	r4,r4,r0	 /* r0 contains MSR_RI here */
+	li	r4,0
 	mtmsrd	r4,1
 
 #ifdef CONFIG_PPC_TRANSACTIONAL_MEM
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index bffec73..08992f8 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -16,72 +16,71 @@
 #include <asm/exception-64s.h>
 #include <asm/ptrace.h>
 #include <asm/cpuidle.h>
+#include <asm/head-64.h>
 
 /*
+ * There are a few constraints to be concerned with.
+ * - Real mode exceptions code/data must be located at their physical location.
+ * - Virtual mode exceptions must be mapped at their 0xc000... location.
+ * - Fixed location code must not call directly beyond the __end_interrupts
+ *   area when built with CONFIG_RELOCATABLE. LOAD_HANDLER / bctr sequence
+ *   must be used.
+ * - LOAD_HANDLER targets must be within first 64K of physical 0 /
+ *   virtual 0xc00...
+ * - Conditional branch targets must be within +/-32K of caller.
+ *
+ * "Virtual exceptions" run with relocation on (MSR_IR=1, MSR_DR=1), and
+ * therefore don't have to run in physically located code or rfid to
+ * virtual mode kernel code. However on relocatable kernels they do have
+ * to branch to KERNELBASE offset because the rest of the kernel (outside
+ * the exception vectors) may be located elsewhere.
+ *
+ * Virtual exceptions correspond with physical, except their entry points
+ * are offset by 0xc000000000000000 and also tend to get an added 0x4000
+ * offset applied. Virtual exceptions are enabled with the Alternate
+ * Interrupt Location (AIL) bit set in the LPCR. However this does not
+ * guarantee they will be delivered virtually. Some conditions (see the ISA)
+ * cause exceptions to be delivered in real mode.
+ *
+ * It's impossible to receive interrupts below 0x300 via AIL.
+ *
+ * KVM: None of the virtual exceptions are from the guest. Anything that
+ * escalated to HV=1 from HV=0 is delivered via real mode handlers.
+ *
+ *
  * We layout physical memory as follows:
  * 0x0000 - 0x00ff : Secondary processor spin code
- * 0x0100 - 0x17ff : pSeries Interrupt prologs
- * 0x1800 - 0x4000 : interrupt support common interrupt prologs
- * 0x4000 - 0x5fff : pSeries interrupts with IR=1,DR=1
- * 0x6000 - 0x6fff : more interrupt support including for IR=1,DR=1
+ * 0x0100 - 0x18ff : Real mode pSeries interrupt vectors
+ * 0x1900 - 0x3fff : Real mode trampolines
+ * 0x4000 - 0x58ff : Relon (IR=1,DR=1) mode pSeries interrupt vectors
+ * 0x5900 - 0x6fff : Relon mode trampolines
  * 0x7000 - 0x7fff : FWNMI data area
- * 0x8000 - 0x8fff : Initial (CPU0) segment table
- * 0x9000 -        : Early init and support code
+ * 0x8000 -   .... : Common interrupt handlers, remaining early
+ *                   setup code, rest of kernel.
+ *
+ * We could reclaim 0x4000-0x42ff for real mode trampolines if the space
+ * is necessary. Until then it's more consistent to explicitly put VIRT_NONE
+ * vectors there.
  */
-	/* Syscall routine is used twice, in reloc-off and reloc-on paths */
-#define SYSCALL_PSERIES_1 					\
-BEGIN_FTR_SECTION						\
-	cmpdi	r0,0x1ebe ; 					\
-	beq-	1f ;						\
-END_FTR_SECTION_IFSET(CPU_FTR_REAL_LE)				\
-	mr	r9,r13 ;					\
-	GET_PACA(r13) ;						\
-	mfspr	r11,SPRN_SRR0 ;					\
-0:
-
-#define SYSCALL_PSERIES_2_RFID 					\
-	mfspr	r12,SPRN_SRR1 ;					\
-	ld	r10,PACAKBASE(r13) ; 				\
-	LOAD_HANDLER(r10, system_call_entry) ; 			\
-	mtspr	SPRN_SRR0,r10 ; 				\
-	ld	r10,PACAKMSR(r13) ;				\
-	mtspr	SPRN_SRR1,r10 ; 				\
-	rfid ; 							\
-	b	. ;	/* prevent speculative execution */
-
-#define SYSCALL_PSERIES_3					\
-	/* Fast LE/BE switch system call */			\
-1:	mfspr	r12,SPRN_SRR1 ;					\
-	xori	r12,r12,MSR_LE ;				\
-	mtspr	SPRN_SRR1,r12 ;					\
-	rfid ;		/* return to userspace */		\
-	b	. ;	/* prevent speculative execution */
-
-#if defined(CONFIG_RELOCATABLE)
-	/*
-	 * We can't branch directly so we do it via the CTR which
-	 * is volatile across system calls.
-	 */
-#define SYSCALL_PSERIES_2_DIRECT				\
-	mflr	r10 ;						\
-	ld	r12,PACAKBASE(r13) ; 				\
-	LOAD_HANDLER(r12, system_call_entry) ;			\
-	mtctr	r12 ;						\
-	mfspr	r12,SPRN_SRR1 ;					\
-	/* Re-use of r13... No spare regs to do this */	\
-	li	r13,MSR_RI ;					\
-	mtmsrd 	r13,1 ;						\
-	GET_PACA(r13) ;	/* get r13 back */			\
-	bctr ;
+OPEN_FIXED_SECTION(real_vectors,        0x0100, 0x1900)
+OPEN_FIXED_SECTION(real_trampolines,    0x1900, 0x4000)
+OPEN_FIXED_SECTION(virt_vectors,        0x4000, 0x5900)
+OPEN_FIXED_SECTION(virt_trampolines,    0x5900, 0x7000)
+#if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV)
+/*
+ * Data area reserved for FWNMI option.
+ * This address (0x7000) is fixed by the RPA.
+ * pseries and powernv need to keep the whole page from
+ * 0x7000 to 0x8000 free for use by the firmware
+ */
+ZERO_FIXED_SECTION(fwnmi_page,          0x7000, 0x8000)
+OPEN_TEXT_SECTION(0x8000)
 #else
-	/* We can branch directly */
-#define SYSCALL_PSERIES_2_DIRECT				\
-	mfspr	r12,SPRN_SRR1 ;					\
-	li	r10,MSR_RI ;					\
-	mtmsrd 	r10,1 ;			/* Set RI (EE=0) */	\
-	b	system_call_common ;
+OPEN_TEXT_SECTION(0x7000)
 #endif
 
+USE_FIXED_SECTION(real_vectors)
+
 /*
  * This is the start of the interrupt handlers for pSeries
  * This code runs with relocation off.
@@ -90,12 +89,13 @@
  * Therefore any relative branches in this section must only
  * branch to labels in this section.
  */
-	. = 0x100
 	.globl __start_interrupts
 __start_interrupts:
 
-	.globl system_reset_pSeries;
-system_reset_pSeries:
+/* No virt vectors corresponding with 0x0..0x100 */
+EXC_VIRT_NONE(0x4000, 0x4100)
+
+EXC_REAL_BEGIN(system_reset, 0x100, 0x200)
 	SET_SCRATCH0(r13)
 #ifdef CONFIG_PPC_P7_NAP
 BEGIN_FTR_SECTION
@@ -136,9 +136,22 @@
 #endif /* CONFIG_PPC_P7_NAP */
 	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common, EXC_STD,
 				 NOTEST, 0x100)
+EXC_REAL_END(system_reset, 0x100, 0x200)
+EXC_VIRT_NONE(0x4100, 0x4200)
+EXC_COMMON(system_reset_common, 0x100, system_reset_exception)
 
-	. = 0x200
-machine_check_pSeries_1:
+#ifdef CONFIG_PPC_PSERIES
+/*
+ * Vectors for the FWNMI option.  Share common code.
+ */
+TRAMP_REAL_BEGIN(system_reset_fwnmi)
+	SET_SCRATCH0(r13)		/* save r13 */
+	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common, EXC_STD,
+				 NOTEST, 0x100)
+#endif /* CONFIG_PPC_PSERIES */
+
+
+EXC_REAL_BEGIN(machine_check, 0x200, 0x300)
 	/* This is moved out of line as it can be patched by FW, but
 	 * some code path might still want to branch into the original
 	 * vector
@@ -158,253 +171,9 @@
 FTR_SECTION_ELSE
 	b	machine_check_pSeries_0
 ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE)
-
-	. = 0x300
-	.globl data_access_pSeries
-data_access_pSeries:
-	SET_SCRATCH0(r13)
-	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, data_access_common, EXC_STD,
-				 KVMTEST, 0x300)
-
-	. = 0x380
-	.globl data_access_slb_pSeries
-data_access_slb_pSeries:
-	SET_SCRATCH0(r13)
-	EXCEPTION_PROLOG_0(PACA_EXSLB)
-	EXCEPTION_PROLOG_1(PACA_EXSLB, KVMTEST, 0x380)
-	std	r3,PACA_EXSLB+EX_R3(r13)
-	mfspr	r3,SPRN_DAR
-	mfspr	r12,SPRN_SRR1
-#ifndef CONFIG_RELOCATABLE
-	b	slb_miss_realmode
-#else
-	/*
-	 * We can't just use a direct branch to slb_miss_realmode
-	 * because the distance from here to there depends on where
-	 * the kernel ends up being put.
-	 */
-	mfctr	r11
-	ld	r10,PACAKBASE(r13)
-	LOAD_HANDLER(r10, slb_miss_realmode)
-	mtctr	r10
-	bctr
-#endif
-
-	STD_EXCEPTION_PSERIES(0x400, instruction_access)
-
-	. = 0x480
-	.globl instruction_access_slb_pSeries
-instruction_access_slb_pSeries:
-	SET_SCRATCH0(r13)
-	EXCEPTION_PROLOG_0(PACA_EXSLB)
-	EXCEPTION_PROLOG_1(PACA_EXSLB, KVMTEST, 0x480)
-	std	r3,PACA_EXSLB+EX_R3(r13)
-	mfspr	r3,SPRN_SRR0		/* SRR0 is faulting address */
-	mfspr	r12,SPRN_SRR1
-#ifndef CONFIG_RELOCATABLE
-	b	slb_miss_realmode
-#else
-	mfctr	r11
-	ld	r10,PACAKBASE(r13)
-	LOAD_HANDLER(r10, slb_miss_realmode)
-	mtctr	r10
-	bctr
-#endif
-
-	/* We open code these as we can't have a ". = x" (even with
-	 * x = "." within a feature section
-	 */
-	. = 0x500;
-	.globl hardware_interrupt_pSeries;
-	.globl hardware_interrupt_hv;
-hardware_interrupt_pSeries:
-hardware_interrupt_hv:
-	BEGIN_FTR_SECTION
-		_MASKABLE_EXCEPTION_PSERIES(0x502, hardware_interrupt,
-					    EXC_HV, SOFTEN_TEST_HV)
-		KVM_HANDLER(PACA_EXGEN, EXC_HV, 0x502)
-	FTR_SECTION_ELSE
-		_MASKABLE_EXCEPTION_PSERIES(0x500, hardware_interrupt,
-					    EXC_STD, SOFTEN_TEST_PR)
-		KVM_HANDLER(PACA_EXGEN, EXC_STD, 0x500)
-	ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206)
-
-	STD_EXCEPTION_PSERIES(0x600, alignment)
-	KVM_HANDLER(PACA_EXGEN, EXC_STD, 0x600)
-
-	STD_EXCEPTION_PSERIES(0x700, program_check)
-	KVM_HANDLER(PACA_EXGEN, EXC_STD, 0x700)
-
-	STD_EXCEPTION_PSERIES(0x800, fp_unavailable)
-	KVM_HANDLER(PACA_EXGEN, EXC_STD, 0x800)
-
-	. = 0x900
-	.globl decrementer_pSeries
-decrementer_pSeries:
-	_MASKABLE_EXCEPTION_PSERIES(0x900, decrementer, EXC_STD, SOFTEN_TEST_PR)
-
-	STD_EXCEPTION_HV(0x980, 0x982, hdecrementer)
-
-	MASKABLE_EXCEPTION_PSERIES(0xa00, 0xa00, doorbell_super)
-	KVM_HANDLER(PACA_EXGEN, EXC_STD, 0xa00)
-
-	STD_EXCEPTION_PSERIES(0xb00, trap_0b)
-	KVM_HANDLER(PACA_EXGEN, EXC_STD, 0xb00)
-
-	. = 0xc00
-	.globl	system_call_pSeries
-system_call_pSeries:
-	 /*
-	  * If CONFIG_KVM_BOOK3S_64_HANDLER is set, save the PPR (on systems
-	  * that support it) before changing to HMT_MEDIUM. That allows the KVM
-	  * code to save that value into the guest state (it is the guest's PPR
-	  * value). Otherwise just change to HMT_MEDIUM as userspace has
-	  * already saved the PPR.
-	  */
-#ifdef CONFIG_KVM_BOOK3S_64_HANDLER
-	SET_SCRATCH0(r13)
-	GET_PACA(r13)
-	std	r9,PACA_EXGEN+EX_R9(r13)
-	OPT_GET_SPR(r9, SPRN_PPR, CPU_FTR_HAS_PPR);
-	HMT_MEDIUM;
-	std	r10,PACA_EXGEN+EX_R10(r13)
-	OPT_SAVE_REG_TO_PACA(PACA_EXGEN+EX_PPR, r9, CPU_FTR_HAS_PPR);
-	mfcr	r9
-	KVMTEST(0xc00)
-	GET_SCRATCH0(r13)
-#else
-	HMT_MEDIUM;
-#endif
-	SYSCALL_PSERIES_1
-	SYSCALL_PSERIES_2_RFID
-	SYSCALL_PSERIES_3
-	KVM_HANDLER(PACA_EXGEN, EXC_STD, 0xc00)
-
-	STD_EXCEPTION_PSERIES(0xd00, single_step)
-	KVM_HANDLER(PACA_EXGEN, EXC_STD, 0xd00)
-
-	/* At 0xe??? we have a bunch of hypervisor exceptions, we branch
-	 * out of line to handle them
-	 */
-	. = 0xe00
-hv_data_storage_trampoline:
-	SET_SCRATCH0(r13)
-	EXCEPTION_PROLOG_0(PACA_EXGEN)
-	b	h_data_storage_hv
-
-	. = 0xe20
-hv_instr_storage_trampoline:
-	SET_SCRATCH0(r13)
-	EXCEPTION_PROLOG_0(PACA_EXGEN)
-	b	h_instr_storage_hv
-
-	. = 0xe40
-emulation_assist_trampoline:
-	SET_SCRATCH0(r13)
-	EXCEPTION_PROLOG_0(PACA_EXGEN)
-	b	emulation_assist_hv
-
-	. = 0xe60
-hv_exception_trampoline:
-	SET_SCRATCH0(r13)
-	EXCEPTION_PROLOG_0(PACA_EXGEN)
-	b	hmi_exception_early
-
-	. = 0xe80
-hv_doorbell_trampoline:
-	SET_SCRATCH0(r13)
-	EXCEPTION_PROLOG_0(PACA_EXGEN)
-	b	h_doorbell_hv
-
-	. = 0xea0
-hv_virt_irq_trampoline:
-	SET_SCRATCH0(r13)
-	EXCEPTION_PROLOG_0(PACA_EXGEN)
-	b	h_virt_irq_hv
-
-	/* We need to deal with the Altivec unavailable exception
-	 * here which is at 0xf20, thus in the middle of the
-	 * prolog code of the PerformanceMonitor one. A little
-	 * trickery is thus necessary
-	 */
-	. = 0xf00
-performance_monitor_pseries_trampoline:
-	SET_SCRATCH0(r13)
-	EXCEPTION_PROLOG_0(PACA_EXGEN)
-	b	performance_monitor_pSeries
-
-	. = 0xf20
-altivec_unavailable_pseries_trampoline:
-	SET_SCRATCH0(r13)
-	EXCEPTION_PROLOG_0(PACA_EXGEN)
-	b	altivec_unavailable_pSeries
-
-	. = 0xf40
-vsx_unavailable_pseries_trampoline:
-	SET_SCRATCH0(r13)
-	EXCEPTION_PROLOG_0(PACA_EXGEN)
-	b	vsx_unavailable_pSeries
-
-	. = 0xf60
-facility_unavailable_trampoline:
-	SET_SCRATCH0(r13)
-	EXCEPTION_PROLOG_0(PACA_EXGEN)
-	b	facility_unavailable_pSeries
-
-	. = 0xf80
-hv_facility_unavailable_trampoline:
-	SET_SCRATCH0(r13)
-	EXCEPTION_PROLOG_0(PACA_EXGEN)
-	b	facility_unavailable_hv
-
-#ifdef CONFIG_CBE_RAS
-	STD_EXCEPTION_HV(0x1200, 0x1202, cbe_system_error)
-	KVM_HANDLER_SKIP(PACA_EXGEN, EXC_HV, 0x1202)
-#endif /* CONFIG_CBE_RAS */
-
-	STD_EXCEPTION_PSERIES(0x1300, instruction_breakpoint)
-	KVM_HANDLER_SKIP(PACA_EXGEN, EXC_STD, 0x1300)
-
-	. = 0x1500
-	.global denorm_exception_hv
-denorm_exception_hv:
-	mtspr	SPRN_SPRG_HSCRATCH0,r13
-	EXCEPTION_PROLOG_0(PACA_EXGEN)
-	EXCEPTION_PROLOG_1(PACA_EXGEN, NOTEST, 0x1500)
-
-#ifdef CONFIG_PPC_DENORMALISATION
-	mfspr	r10,SPRN_HSRR1
-	mfspr	r11,SPRN_HSRR0		/* save HSRR0 */
-	andis.	r10,r10,(HSRR1_DENORM)@h /* denorm? */
-	addi	r11,r11,-4		/* HSRR0 is next instruction */
-	bne+	denorm_assist
-#endif
-
-	KVMTEST(0x1500)
-	EXCEPTION_PROLOG_PSERIES_1(denorm_common, EXC_HV)
-	KVM_HANDLER_SKIP(PACA_EXGEN, EXC_STD, 0x1500)
-
-#ifdef CONFIG_CBE_RAS
-	STD_EXCEPTION_HV(0x1600, 0x1602, cbe_maintenance)
-	KVM_HANDLER_SKIP(PACA_EXGEN, EXC_HV, 0x1602)
-#endif /* CONFIG_CBE_RAS */
-
-	STD_EXCEPTION_PSERIES(0x1700, altivec_assist)
-	KVM_HANDLER(PACA_EXGEN, EXC_STD, 0x1700)
-
-#ifdef CONFIG_CBE_RAS
-	STD_EXCEPTION_HV(0x1800, 0x1802, cbe_thermal)
-	KVM_HANDLER_SKIP(PACA_EXGEN, EXC_HV, 0x1802)
-#else
-	. = 0x1800
-#endif /* CONFIG_CBE_RAS */
-
-
-/*** Out of line interrupts support ***/
-
-	.align	7
-	/* moved from 0x200 */
-machine_check_powernv_early:
+EXC_REAL_END(machine_check, 0x200, 0x300)
+EXC_VIRT_NONE(0x4200, 0x4300)
+TRAMP_REAL_BEGIN(machine_check_powernv_early)
 BEGIN_FTR_SECTION
 	EXCEPTION_PROLOG_1(PACA_EXMC, NOTEST, 0x200)
 	/*
@@ -457,7 +226,6 @@
 	mfmsr	r11			/* get MSR value */
 	ori	r11,r11,MSR_ME		/* turn on ME bit */
 	ori	r11,r11,MSR_RI		/* turn on RI bit */
-	ld	r12,PACAKBASE(r13)	/* get high part of &label */
 	LOAD_HANDLER(r12, machine_check_handle_early)
 1:	mtspr	SPRN_SRR0,r12
 	mtspr	SPRN_SRR1,r11
@@ -470,7 +238,6 @@
 	 */
 	addi	r1,r1,INT_FRAME_SIZE	/* go back to previous stack frame */
 	ld	r11,PACAKMSR(r13)
-	ld	r12,PACAKBASE(r13)
 	LOAD_HANDLER(r12, unrecover_mce)
 	li	r10,MSR_ME
 	andc	r11,r11,r10		/* Turn off MSR_ME */
@@ -478,20 +245,19 @@
 	b	.	/* prevent speculative execution */
 END_FTR_SECTION_IFSET(CPU_FTR_HVMODE)
 
-machine_check_pSeries:
+TRAMP_REAL_BEGIN(machine_check_pSeries)
 	.globl machine_check_fwnmi
 machine_check_fwnmi:
 	SET_SCRATCH0(r13)		/* save r13 */
 	EXCEPTION_PROLOG_0(PACA_EXMC)
 machine_check_pSeries_0:
-	EXCEPTION_PROLOG_1(PACA_EXMC, KVMTEST, 0x200)
+	EXCEPTION_PROLOG_1(PACA_EXMC, KVMTEST_PR, 0x200)
 	/*
 	 * The following is essentially EXCEPTION_PROLOG_PSERIES_1 with the
 	 * difference that MSR_RI is not enabled, because PACA_EXMC is being
 	 * used, so nested machine check corrupts it. machine_check_common
 	 * enables MSR_RI.
 	 */
-	ld	r12,PACAKBASE(r13)
 	ld	r10,PACAKMSR(r13)
 	xori	r10,r10,MSR_RI
 	mfspr	r11,SPRN_SRR0
@@ -502,488 +268,13 @@
 	rfid
 	b	.	/* prevent speculative execution */
 
-	KVM_HANDLER_SKIP(PACA_EXMC, EXC_STD, 0x200)
-	KVM_HANDLER_SKIP(PACA_EXGEN, EXC_STD, 0x300)
-	KVM_HANDLER_SKIP(PACA_EXSLB, EXC_STD, 0x380)
-	KVM_HANDLER(PACA_EXGEN, EXC_STD, 0x400)
-	KVM_HANDLER(PACA_EXSLB, EXC_STD, 0x480)
-	KVM_HANDLER(PACA_EXGEN, EXC_STD, 0x900)
-	KVM_HANDLER(PACA_EXGEN, EXC_HV, 0x982)
+TRAMP_KVM_SKIP(PACA_EXMC, 0x200)
 
-#ifdef CONFIG_PPC_DENORMALISATION
-denorm_assist:
-BEGIN_FTR_SECTION
-/*
- * To denormalise we need to move a copy of the register to itself.
- * For POWER6 do that here for all FP regs.
- */
-	mfmsr	r10
-	ori	r10,r10,(MSR_FP|MSR_FE0|MSR_FE1)
-	xori	r10,r10,(MSR_FE0|MSR_FE1)
-	mtmsrd	r10
-	sync
-
-#define FMR2(n)  fmr (n), (n) ; fmr n+1, n+1
-#define FMR4(n)  FMR2(n) ; FMR2(n+2)
-#define FMR8(n)  FMR4(n) ; FMR4(n+4)
-#define FMR16(n) FMR8(n) ; FMR8(n+8)
-#define FMR32(n) FMR16(n) ; FMR16(n+16)
-	FMR32(0)
-
-FTR_SECTION_ELSE
-/*
- * To denormalise we need to move a copy of the register to itself.
- * For POWER7 do that here for the first 32 VSX registers only.
- */
-	mfmsr	r10
-	oris	r10,r10,MSR_VSX@h
-	mtmsrd	r10
-	sync
-
-#define XVCPSGNDP2(n) XVCPSGNDP(n,n,n) ; XVCPSGNDP(n+1,n+1,n+1)
-#define XVCPSGNDP4(n) XVCPSGNDP2(n) ; XVCPSGNDP2(n+2)
-#define XVCPSGNDP8(n) XVCPSGNDP4(n) ; XVCPSGNDP4(n+4)
-#define XVCPSGNDP16(n) XVCPSGNDP8(n) ; XVCPSGNDP8(n+8)
-#define XVCPSGNDP32(n) XVCPSGNDP16(n) ; XVCPSGNDP16(n+16)
-	XVCPSGNDP32(0)
-
-ALT_FTR_SECTION_END_IFCLR(CPU_FTR_ARCH_206)
-
-BEGIN_FTR_SECTION
-	b	denorm_done
-END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_207S)
-/*
- * To denormalise we need to move a copy of the register to itself.
- * For POWER8 we need to do that for all 64 VSX registers
- */
-	XVCPSGNDP32(32)
-denorm_done:
-	mtspr	SPRN_HSRR0,r11
-	mtcrf	0x80,r9
-	ld	r9,PACA_EXGEN+EX_R9(r13)
-	RESTORE_PPR_PACA(PACA_EXGEN, r10)
-BEGIN_FTR_SECTION
-	ld	r10,PACA_EXGEN+EX_CFAR(r13)
-	mtspr	SPRN_CFAR,r10
-END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
-	ld	r10,PACA_EXGEN+EX_R10(r13)
-	ld	r11,PACA_EXGEN+EX_R11(r13)
-	ld	r12,PACA_EXGEN+EX_R12(r13)
-	ld	r13,PACA_EXGEN+EX_R13(r13)
-	HRFID
-	b	.
-#endif
-
-	.align	7
-	/* moved from 0xe00 */
-	STD_EXCEPTION_HV_OOL(0xe02, h_data_storage)
-	KVM_HANDLER_SKIP(PACA_EXGEN, EXC_HV, 0xe02)
-	STD_EXCEPTION_HV_OOL(0xe22, h_instr_storage)
-	KVM_HANDLER(PACA_EXGEN, EXC_HV, 0xe22)
-	STD_EXCEPTION_HV_OOL(0xe42, emulation_assist)
-	KVM_HANDLER(PACA_EXGEN, EXC_HV, 0xe42)
-	MASKABLE_EXCEPTION_HV_OOL(0xe62, hmi_exception)
-	KVM_HANDLER(PACA_EXGEN, EXC_HV, 0xe62)
-
-	MASKABLE_EXCEPTION_HV_OOL(0xe82, h_doorbell)
-	KVM_HANDLER(PACA_EXGEN, EXC_HV, 0xe82)
-
-	MASKABLE_EXCEPTION_HV_OOL(0xea2, h_virt_irq)
-	KVM_HANDLER(PACA_EXGEN, EXC_HV, 0xea2)
-
-	/* moved from 0xf00 */
-	STD_EXCEPTION_PSERIES_OOL(0xf00, performance_monitor)
-	KVM_HANDLER(PACA_EXGEN, EXC_STD, 0xf00)
-	STD_EXCEPTION_PSERIES_OOL(0xf20, altivec_unavailable)
-	KVM_HANDLER(PACA_EXGEN, EXC_STD, 0xf20)
-	STD_EXCEPTION_PSERIES_OOL(0xf40, vsx_unavailable)
-	KVM_HANDLER(PACA_EXGEN, EXC_STD, 0xf40)
-	STD_EXCEPTION_PSERIES_OOL(0xf60, facility_unavailable)
-	KVM_HANDLER(PACA_EXGEN, EXC_STD, 0xf60)
-	STD_EXCEPTION_HV_OOL(0xf82, facility_unavailable)
-	KVM_HANDLER(PACA_EXGEN, EXC_HV, 0xf82)
-
-/*
- * An interrupt came in while soft-disabled. We set paca->irq_happened, then:
- * - If it was a decrementer interrupt, we bump the dec to max and and return.
- * - If it was a doorbell we return immediately since doorbells are edge
- *   triggered and won't automatically refire.
- * - If it was a HMI we return immediately since we handled it in realmode
- *   and it won't refire.
- * - else we hard disable and return.
- * This is called with r10 containing the value to OR to the paca field.
- */
-#define MASKED_INTERRUPT(_H)				\
-masked_##_H##interrupt:					\
-	std	r11,PACA_EXGEN+EX_R11(r13);		\
-	lbz	r11,PACAIRQHAPPENED(r13);		\
-	or	r11,r11,r10;				\
-	stb	r11,PACAIRQHAPPENED(r13);		\
-	cmpwi	r10,PACA_IRQ_DEC;			\
-	bne	1f;					\
-	lis	r10,0x7fff;				\
-	ori	r10,r10,0xffff;				\
-	mtspr	SPRN_DEC,r10;				\
-	b	2f;					\
-1:	cmpwi	r10,PACA_IRQ_DBELL;			\
-	beq	2f;					\
-	cmpwi	r10,PACA_IRQ_HMI;			\
-	beq	2f;					\
-	mfspr	r10,SPRN_##_H##SRR1;			\
-	rldicl	r10,r10,48,1; /* clear MSR_EE */	\
-	rotldi	r10,r10,16;				\
-	mtspr	SPRN_##_H##SRR1,r10;			\
-2:	mtcrf	0x80,r9;				\
-	ld	r9,PACA_EXGEN+EX_R9(r13);		\
-	ld	r10,PACA_EXGEN+EX_R10(r13);		\
-	ld	r11,PACA_EXGEN+EX_R11(r13);		\
-	GET_SCRATCH0(r13);				\
-	##_H##rfid;					\
-	b	.
-	
-	MASKED_INTERRUPT()
-	MASKED_INTERRUPT(H)
-
-/*
- * Called from arch_local_irq_enable when an interrupt needs
- * to be resent. r3 contains 0x500, 0x900, 0xa00 or 0xe80 to indicate
- * which kind of interrupt. MSR:EE is already off. We generate a
- * stackframe like if a real interrupt had happened.
- *
- * Note: While MSR:EE is off, we need to make sure that _MSR
- * in the generated frame has EE set to 1 or the exception
- * handler will not properly re-enable them.
- */
-_GLOBAL(__replay_interrupt)
-	/* We are going to jump to the exception common code which
-	 * will retrieve various register values from the PACA which
-	 * we don't give a damn about, so we don't bother storing them.
-	 */
-	mfmsr	r12
-	mflr	r11
-	mfcr	r9
-	ori	r12,r12,MSR_EE
-	cmpwi	r3,0x900
-	beq	decrementer_common
-	cmpwi	r3,0x500
-	beq	hardware_interrupt_common
-BEGIN_FTR_SECTION
-	cmpwi	r3,0xe80
-	beq	h_doorbell_common
-	cmpwi	r3,0xea0
-	beq	h_virt_irq_common
-	cmpwi	r3,0xe60
-	beq	hmi_exception_common
-FTR_SECTION_ELSE
-	cmpwi	r3,0xa00
-	beq	doorbell_super_common
-ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE)
-	blr
-
-#ifdef CONFIG_PPC_PSERIES
-/*
- * Vectors for the FWNMI option.  Share common code.
- */
-	.globl system_reset_fwnmi
-      .align 7
-system_reset_fwnmi:
-	SET_SCRATCH0(r13)		/* save r13 */
-	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common, EXC_STD,
-				 NOTEST, 0x100)
-
-#endif /* CONFIG_PPC_PSERIES */
-
-#ifdef CONFIG_KVM_BOOK3S_64_HANDLER
-kvmppc_skip_interrupt:
-	/*
-	 * Here all GPRs are unchanged from when the interrupt happened
-	 * except for r13, which is saved in SPRG_SCRATCH0.
-	 */
-	mfspr	r13, SPRN_SRR0
-	addi	r13, r13, 4
-	mtspr	SPRN_SRR0, r13
-	GET_SCRATCH0(r13)
-	rfid
-	b	.
-
-kvmppc_skip_Hinterrupt:
-	/*
-	 * Here all GPRs are unchanged from when the interrupt happened
-	 * except for r13, which is saved in SPRG_SCRATCH0.
-	 */
-	mfspr	r13, SPRN_HSRR0
-	addi	r13, r13, 4
-	mtspr	SPRN_HSRR0, r13
-	GET_SCRATCH0(r13)
-	hrfid
-	b	.
-#endif
-
-/*
- * Ensure that any handlers that get invoked from the exception prologs
- * above are below the first 64KB (0x10000) of the kernel image because
- * the prologs assemble the addresses of these handlers using the
- * LOAD_HANDLER macro, which uses an ori instruction.
- */
-
-/*** Common interrupt handlers ***/
-
-	STD_EXCEPTION_COMMON(0x100, system_reset, system_reset_exception)
-
-	STD_EXCEPTION_COMMON_ASYNC(0x500, hardware_interrupt, do_IRQ)
-	STD_EXCEPTION_COMMON_ASYNC(0x900, decrementer, timer_interrupt)
-	STD_EXCEPTION_COMMON(0x980, hdecrementer, hdec_interrupt)
-#ifdef CONFIG_PPC_DOORBELL
-	STD_EXCEPTION_COMMON_ASYNC(0xa00, doorbell_super, doorbell_exception)
-#else
-	STD_EXCEPTION_COMMON_ASYNC(0xa00, doorbell_super, unknown_exception)
-#endif
-	STD_EXCEPTION_COMMON(0xb00, trap_0b, unknown_exception)
-	STD_EXCEPTION_COMMON(0xd00, single_step, single_step_exception)
-	STD_EXCEPTION_COMMON(0xe00, trap_0e, unknown_exception)
-	STD_EXCEPTION_COMMON(0xe40, emulation_assist, emulation_assist_interrupt)
-	STD_EXCEPTION_COMMON_ASYNC(0xe60, hmi_exception, handle_hmi_exception)
-#ifdef CONFIG_PPC_DOORBELL
-	STD_EXCEPTION_COMMON_ASYNC(0xe80, h_doorbell, doorbell_exception)
-#else
-	STD_EXCEPTION_COMMON_ASYNC(0xe80, h_doorbell, unknown_exception)
-#endif
-	STD_EXCEPTION_COMMON_ASYNC(0xea0, h_virt_irq, do_IRQ)
-	STD_EXCEPTION_COMMON_ASYNC(0xf00, performance_monitor, performance_monitor_exception)
-	STD_EXCEPTION_COMMON(0x1300, instruction_breakpoint, instruction_breakpoint_exception)
-	STD_EXCEPTION_COMMON(0x1502, denorm, unknown_exception)
-#ifdef CONFIG_ALTIVEC
-	STD_EXCEPTION_COMMON(0x1700, altivec_assist, altivec_assist_exception)
-#else
-	STD_EXCEPTION_COMMON(0x1700, altivec_assist, unknown_exception)
-#endif
-
-	/*
-	 * Relocation-on interrupts: A subset of the interrupts can be delivered
-	 * with IR=1/DR=1, if AIL==2 and MSR.HV won't be changed by delivering
-	 * it.  Addresses are the same as the original interrupt addresses, but
-	 * offset by 0xc000000000004000.
-	 * It's impossible to receive interrupts below 0x300 via this mechanism.
-	 * KVM: None of these traps are from the guest ; anything that escalated
-	 * to HV=1 from HV=0 is delivered via real mode handlers.
-	 */
-
-	/*
-	 * This uses the standard macro, since the original 0x300 vector
-	 * only has extra guff for STAB-based processors -- which never
-	 * come here.
-	 */
-	STD_RELON_EXCEPTION_PSERIES(0x4300, 0x300, data_access)
-	. = 0x4380
-	.globl data_access_slb_relon_pSeries
-data_access_slb_relon_pSeries:
-	SET_SCRATCH0(r13)
-	EXCEPTION_PROLOG_0(PACA_EXSLB)
-	EXCEPTION_PROLOG_1(PACA_EXSLB, NOTEST, 0x380)
-	std	r3,PACA_EXSLB+EX_R3(r13)
-	mfspr	r3,SPRN_DAR
-	mfspr	r12,SPRN_SRR1
-#ifndef CONFIG_RELOCATABLE
-	b	slb_miss_realmode
-#else
-	/*
-	 * We can't just use a direct branch to slb_miss_realmode
-	 * because the distance from here to there depends on where
-	 * the kernel ends up being put.
-	 */
-	mfctr	r11
-	ld	r10,PACAKBASE(r13)
-	LOAD_HANDLER(r10, slb_miss_realmode)
-	mtctr	r10
-	bctr
-#endif
-
-	STD_RELON_EXCEPTION_PSERIES(0x4400, 0x400, instruction_access)
-	. = 0x4480
-	.globl instruction_access_slb_relon_pSeries
-instruction_access_slb_relon_pSeries:
-	SET_SCRATCH0(r13)
-	EXCEPTION_PROLOG_0(PACA_EXSLB)
-	EXCEPTION_PROLOG_1(PACA_EXSLB, NOTEST, 0x480)
-	std	r3,PACA_EXSLB+EX_R3(r13)
-	mfspr	r3,SPRN_SRR0		/* SRR0 is faulting address */
-	mfspr	r12,SPRN_SRR1
-#ifndef CONFIG_RELOCATABLE
-	b	slb_miss_realmode
-#else
-	mfctr	r11
-	ld	r10,PACAKBASE(r13)
-	LOAD_HANDLER(r10, slb_miss_realmode)
-	mtctr	r10
-	bctr
-#endif
-
-	. = 0x4500
-	.globl hardware_interrupt_relon_pSeries;
-	.globl hardware_interrupt_relon_hv;
-hardware_interrupt_relon_pSeries:
-hardware_interrupt_relon_hv:
-	BEGIN_FTR_SECTION
-		_MASKABLE_RELON_EXCEPTION_PSERIES(0x502, hardware_interrupt, EXC_HV, SOFTEN_TEST_HV)
-	FTR_SECTION_ELSE
-		_MASKABLE_RELON_EXCEPTION_PSERIES(0x500, hardware_interrupt, EXC_STD, SOFTEN_TEST_PR)
-	ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE)
-	STD_RELON_EXCEPTION_PSERIES(0x4600, 0x600, alignment)
-	STD_RELON_EXCEPTION_PSERIES(0x4700, 0x700, program_check)
-	STD_RELON_EXCEPTION_PSERIES(0x4800, 0x800, fp_unavailable)
-	MASKABLE_RELON_EXCEPTION_PSERIES(0x4900, 0x900, decrementer)
-	STD_RELON_EXCEPTION_HV(0x4980, 0x982, hdecrementer)
-	MASKABLE_RELON_EXCEPTION_PSERIES(0x4a00, 0xa00, doorbell_super)
-	STD_RELON_EXCEPTION_PSERIES(0x4b00, 0xb00, trap_0b)
-
-	. = 0x4c00
-	.globl system_call_relon_pSeries
-system_call_relon_pSeries:
-	HMT_MEDIUM
-	SYSCALL_PSERIES_1
-	SYSCALL_PSERIES_2_DIRECT
-	SYSCALL_PSERIES_3
-
-	STD_RELON_EXCEPTION_PSERIES(0x4d00, 0xd00, single_step)
-
-	. = 0x4e00
-	b	.	/* Can't happen, see v2.07 Book III-S section 6.5 */
-
-	. = 0x4e20
-	b	.	/* Can't happen, see v2.07 Book III-S section 6.5 */
-
-	. = 0x4e40
-emulation_assist_relon_trampoline:
-	SET_SCRATCH0(r13)
-	EXCEPTION_PROLOG_0(PACA_EXGEN)
-	b	emulation_assist_relon_hv
-
-	. = 0x4e60
-	b	.	/* Can't happen, see v2.07 Book III-S section 6.5 */
-
-	. = 0x4e80
-h_doorbell_relon_trampoline:
-	SET_SCRATCH0(r13)
-	EXCEPTION_PROLOG_0(PACA_EXGEN)
-	b	h_doorbell_relon_hv
-
-	. = 0x4ea0
-h_virt_irq_relon_trampoline:
-	SET_SCRATCH0(r13)
-	EXCEPTION_PROLOG_0(PACA_EXGEN)
-	b	h_virt_irq_relon_hv
-
-	. = 0x4f00
-performance_monitor_relon_pseries_trampoline:
-	SET_SCRATCH0(r13)
-	EXCEPTION_PROLOG_0(PACA_EXGEN)
-	b	performance_monitor_relon_pSeries
-
-	. = 0x4f20
-altivec_unavailable_relon_pseries_trampoline:
-	SET_SCRATCH0(r13)
-	EXCEPTION_PROLOG_0(PACA_EXGEN)
-	b	altivec_unavailable_relon_pSeries
-
-	. = 0x4f40
-vsx_unavailable_relon_pseries_trampoline:
-	SET_SCRATCH0(r13)
-	EXCEPTION_PROLOG_0(PACA_EXGEN)
-	b	vsx_unavailable_relon_pSeries
-
-	. = 0x4f60
-facility_unavailable_relon_trampoline:
-	SET_SCRATCH0(r13)
-	EXCEPTION_PROLOG_0(PACA_EXGEN)
-	b	facility_unavailable_relon_pSeries
-
-	. = 0x4f80
-hv_facility_unavailable_relon_trampoline:
-	SET_SCRATCH0(r13)
-	EXCEPTION_PROLOG_0(PACA_EXGEN)
-	b	hv_facility_unavailable_relon_hv
-
-	STD_RELON_EXCEPTION_PSERIES(0x5300, 0x1300, instruction_breakpoint)
-#ifdef CONFIG_PPC_DENORMALISATION
-	. = 0x5500
-	b	denorm_exception_hv
-#endif
-	STD_RELON_EXCEPTION_PSERIES(0x5700, 0x1700, altivec_assist)
-
-	.align	7
-system_call_entry:
-	b	system_call_common
-
-ppc64_runlatch_on_trampoline:
-	b	__ppc64_runlatch_on
-
-/*
- * Here r13 points to the paca, r9 contains the saved CR,
- * SRR0 and SRR1 are saved in r11 and r12,
- * r9 - r13 are saved in paca->exgen.
- */
-	.align	7
-	.globl data_access_common
-data_access_common:
-	mfspr	r10,SPRN_DAR
-	std	r10,PACA_EXGEN+EX_DAR(r13)
-	mfspr	r10,SPRN_DSISR
-	stw	r10,PACA_EXGEN+EX_DSISR(r13)
-	EXCEPTION_PROLOG_COMMON(0x300, PACA_EXGEN)
-	RECONCILE_IRQ_STATE(r10, r11)
-	ld	r12,_MSR(r1)
-	ld	r3,PACA_EXGEN+EX_DAR(r13)
-	lwz	r4,PACA_EXGEN+EX_DSISR(r13)
-	li	r5,0x300
-	std	r3,_DAR(r1)
-	std	r4,_DSISR(r1)
-BEGIN_MMU_FTR_SECTION
-	b	do_hash_page		/* Try to handle as hpte fault */
-MMU_FTR_SECTION_ELSE
-	b	handle_page_fault
-ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_TYPE_RADIX)
-
-	.align  7
-	.globl  h_data_storage_common
-h_data_storage_common:
-	mfspr   r10,SPRN_HDAR
-	std     r10,PACA_EXGEN+EX_DAR(r13)
-	mfspr   r10,SPRN_HDSISR
-	stw     r10,PACA_EXGEN+EX_DSISR(r13)
-	EXCEPTION_PROLOG_COMMON(0xe00, PACA_EXGEN)
-	bl      save_nvgprs
-	RECONCILE_IRQ_STATE(r10, r11)
-	addi    r3,r1,STACK_FRAME_OVERHEAD
-	bl      unknown_exception
-	b       ret_from_except
-
-	.align	7
-	.globl instruction_access_common
-instruction_access_common:
-	EXCEPTION_PROLOG_COMMON(0x400, PACA_EXGEN)
-	RECONCILE_IRQ_STATE(r10, r11)
-	ld	r12,_MSR(r1)
-	ld	r3,_NIP(r1)
-	andis.	r4,r12,0x5820
-	li	r5,0x400
-	std	r3,_DAR(r1)
-	std	r4,_DSISR(r1)
-BEGIN_MMU_FTR_SECTION
-	b	do_hash_page		/* Try to handle as hpte fault */
-MMU_FTR_SECTION_ELSE
-	b	handle_page_fault
-ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_TYPE_RADIX)
-
-	STD_EXCEPTION_COMMON(0xe20, h_instr_storage, unknown_exception)
-
+EXC_COMMON_BEGIN(machine_check_common)
 	/*
 	 * Machine check is different because we use a different
 	 * save area: PACA_EXMC instead of PACA_EXGEN.
 	 */
-	.align	7
-	.globl machine_check_common
-machine_check_common:
-
 	mfspr	r10,SPRN_DAR
 	std	r10,PACA_EXMC+EX_DAR(r13)
 	mfspr	r10,SPRN_DSISR
@@ -1003,230 +294,6 @@
 	bl	machine_check_exception
 	b	ret_from_except
 
-	.align	7
-	.globl alignment_common
-alignment_common:
-	mfspr	r10,SPRN_DAR
-	std	r10,PACA_EXGEN+EX_DAR(r13)
-	mfspr	r10,SPRN_DSISR
-	stw	r10,PACA_EXGEN+EX_DSISR(r13)
-	EXCEPTION_PROLOG_COMMON(0x600, PACA_EXGEN)
-	ld	r3,PACA_EXGEN+EX_DAR(r13)
-	lwz	r4,PACA_EXGEN+EX_DSISR(r13)
-	std	r3,_DAR(r1)
-	std	r4,_DSISR(r1)
-	bl	save_nvgprs
-	RECONCILE_IRQ_STATE(r10, r11)
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	alignment_exception
-	b	ret_from_except
-
-	.align	7
-	.globl program_check_common
-program_check_common:
-	EXCEPTION_PROLOG_COMMON(0x700, PACA_EXGEN)
-	bl	save_nvgprs
-	RECONCILE_IRQ_STATE(r10, r11)
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	program_check_exception
-	b	ret_from_except
-
-	.align	7
-	.globl fp_unavailable_common
-fp_unavailable_common:
-	EXCEPTION_PROLOG_COMMON(0x800, PACA_EXGEN)
-	bne	1f			/* if from user, just load it up */
-	bl	save_nvgprs
-	RECONCILE_IRQ_STATE(r10, r11)
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	kernel_fp_unavailable_exception
-	BUG_OPCODE
-1:
-#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
-BEGIN_FTR_SECTION
-	/* Test if 2 TM state bits are zero.  If non-zero (ie. userspace was in
-	 * transaction), go do TM stuff
-	 */
-	rldicl.	r0, r12, (64-MSR_TS_LG), (64-2)
-	bne-	2f
-END_FTR_SECTION_IFSET(CPU_FTR_TM)
-#endif
-	bl	load_up_fpu
-	b	fast_exception_return
-#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
-2:	/* User process was in a transaction */
-	bl	save_nvgprs
-	RECONCILE_IRQ_STATE(r10, r11)
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	fp_unavailable_tm
-	b	ret_from_except
-#endif
-	.align	7
-	.globl altivec_unavailable_common
-altivec_unavailable_common:
-	EXCEPTION_PROLOG_COMMON(0xf20, PACA_EXGEN)
-#ifdef CONFIG_ALTIVEC
-BEGIN_FTR_SECTION
-	beq	1f
-#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
-  BEGIN_FTR_SECTION_NESTED(69)
-	/* Test if 2 TM state bits are zero.  If non-zero (ie. userspace was in
-	 * transaction), go do TM stuff
-	 */
-	rldicl.	r0, r12, (64-MSR_TS_LG), (64-2)
-	bne-	2f
-  END_FTR_SECTION_NESTED(CPU_FTR_TM, CPU_FTR_TM, 69)
-#endif
-	bl	load_up_altivec
-	b	fast_exception_return
-#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
-2:	/* User process was in a transaction */
-	bl	save_nvgprs
-	RECONCILE_IRQ_STATE(r10, r11)
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	altivec_unavailable_tm
-	b	ret_from_except
-#endif
-1:
-END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
-#endif
-	bl	save_nvgprs
-	RECONCILE_IRQ_STATE(r10, r11)
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	altivec_unavailable_exception
-	b	ret_from_except
-
-	.align	7
-	.globl vsx_unavailable_common
-vsx_unavailable_common:
-	EXCEPTION_PROLOG_COMMON(0xf40, PACA_EXGEN)
-#ifdef CONFIG_VSX
-BEGIN_FTR_SECTION
-	beq	1f
-#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
-  BEGIN_FTR_SECTION_NESTED(69)
-	/* Test if 2 TM state bits are zero.  If non-zero (ie. userspace was in
-	 * transaction), go do TM stuff
-	 */
-	rldicl.	r0, r12, (64-MSR_TS_LG), (64-2)
-	bne-	2f
-  END_FTR_SECTION_NESTED(CPU_FTR_TM, CPU_FTR_TM, 69)
-#endif
-	b	load_up_vsx
-#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
-2:	/* User process was in a transaction */
-	bl	save_nvgprs
-	RECONCILE_IRQ_STATE(r10, r11)
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	vsx_unavailable_tm
-	b	ret_from_except
-#endif
-1:
-END_FTR_SECTION_IFSET(CPU_FTR_VSX)
-#endif
-	bl	save_nvgprs
-	RECONCILE_IRQ_STATE(r10, r11)
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	vsx_unavailable_exception
-	b	ret_from_except
-
-	/* Equivalents to the above handlers for relocation-on interrupt vectors */
-	STD_RELON_EXCEPTION_HV_OOL(0xe40, emulation_assist)
-	MASKABLE_RELON_EXCEPTION_HV_OOL(0xe80, h_doorbell)
-	MASKABLE_RELON_EXCEPTION_HV_OOL(0xea0, h_virt_irq)
-
-	STD_RELON_EXCEPTION_PSERIES_OOL(0xf00, performance_monitor)
-	STD_RELON_EXCEPTION_PSERIES_OOL(0xf20, altivec_unavailable)
-	STD_RELON_EXCEPTION_PSERIES_OOL(0xf40, vsx_unavailable)
-	STD_RELON_EXCEPTION_PSERIES_OOL(0xf60, facility_unavailable)
-	STD_RELON_EXCEPTION_HV_OOL(0xf80, hv_facility_unavailable)
-
-	/*
-	 * The __end_interrupts marker must be past the out-of-line (OOL)
-	 * handlers, so that they are copied to real address 0x100 when running
-	 * a relocatable kernel. This ensures they can be reached from the short
-	 * trampoline handlers (like 0x4f00, 0x4f20, etc.) which branch
-	 * directly, without using LOAD_HANDLER().
-	 */
-	.align	7
-	.globl	__end_interrupts
-__end_interrupts:
-
-#if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV)
-/*
- * Data area reserved for FWNMI option.
- * This address (0x7000) is fixed by the RPA.
- */
-	.= 0x7000
-	.globl fwnmi_data_area
-fwnmi_data_area:
-
-	/* pseries and powernv need to keep the whole page from
-	 * 0x7000 to 0x8000 free for use by the firmware
-	 */
-	. = 0x8000
-#endif /* defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV) */
-
-	STD_EXCEPTION_COMMON(0xf60, facility_unavailable, facility_unavailable_exception)
-	STD_EXCEPTION_COMMON(0xf80, hv_facility_unavailable, facility_unavailable_exception)
-
-#ifdef CONFIG_CBE_RAS
-	STD_EXCEPTION_COMMON(0x1200, cbe_system_error, cbe_system_error_exception)
-	STD_EXCEPTION_COMMON(0x1600, cbe_maintenance, cbe_maintenance_exception)
-	STD_EXCEPTION_COMMON(0x1800, cbe_thermal, cbe_thermal_exception)
-#endif /* CONFIG_CBE_RAS */
-
-	.globl hmi_exception_early
-hmi_exception_early:
-	EXCEPTION_PROLOG_1(PACA_EXGEN, KVMTEST, 0xe62)
-	mr	r10,r1			/* Save r1			*/
-	ld	r1,PACAEMERGSP(r13)	/* Use emergency stack		*/
-	subi	r1,r1,INT_FRAME_SIZE	/* alloc stack frame		*/
-	std	r9,_CCR(r1)		/* save CR in stackframe	*/
-	mfspr	r11,SPRN_HSRR0		/* Save HSRR0 */
-	std	r11,_NIP(r1)		/* save HSRR0 in stackframe	*/
-	mfspr	r12,SPRN_HSRR1		/* Save SRR1 */
-	std	r12,_MSR(r1)		/* save SRR1 in stackframe	*/
-	std	r10,0(r1)		/* make stack chain pointer	*/
-	std	r0,GPR0(r1)		/* save r0 in stackframe	*/
-	std	r10,GPR1(r1)		/* save r1 in stackframe	*/
-	EXCEPTION_PROLOG_COMMON_2(PACA_EXGEN)
-	EXCEPTION_PROLOG_COMMON_3(0xe60)
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	hmi_exception_realmode
-	/* Windup the stack. */
-	/* Move original HSRR0 and HSRR1 into the respective regs */
-	ld	r9,_MSR(r1)
-	mtspr	SPRN_HSRR1,r9
-	ld	r3,_NIP(r1)
-	mtspr	SPRN_HSRR0,r3
-	ld	r9,_CTR(r1)
-	mtctr	r9
-	ld	r9,_XER(r1)
-	mtxer	r9
-	ld	r9,_LINK(r1)
-	mtlr	r9
-	REST_GPR(0, r1)
-	REST_8GPRS(2, r1)
-	REST_GPR(10, r1)
-	ld	r11,_CCR(r1)
-	mtcr	r11
-	REST_GPR(11, r1)
-	REST_2GPRS(12, r1)
-	/* restore original r1. */
-	ld	r1,GPR1(r1)
-
-	/*
-	 * Go to virtual mode and pull the HMI event information from
-	 * firmware.
-	 */
-	.globl hmi_exception_after_realmode
-hmi_exception_after_realmode:
-	SET_SCRATCH0(r13)
-	EXCEPTION_PROLOG_0(PACA_EXGEN)
-	b	hmi_exception_hv
-
-
 #define MACHINE_CHECK_HANDLER_WINDUP			\
 	/* Clear MSR_RI before setting SRR0 and SRR1. */\
 	li	r0,MSR_RI;				\
@@ -1262,9 +329,7 @@
 	 * Handle machine check early in real mode. We come here with
 	 * ME=1, MMU (IR=0 and DR=0) off and using MC emergency stack.
 	 */
-	.align	7
-	.globl machine_check_handle_early
-machine_check_handle_early:
+EXC_COMMON_BEGIN(machine_check_handle_early)
 	std	r0,GPR0(r1)	/* Save r0 */
 	EXCEPTION_PROLOG_COMMON_3(0x200)
 	bl	save_nvgprs
@@ -1353,7 +418,6 @@
 	andi.	r11,r12,MSR_RI
 	bne	2f
 1:	mfspr	r11,SPRN_SRR0
-	ld	r10,PACAKBASE(r13)
 	LOAD_HANDLER(r10,unrecover_mce)
 	mtspr	SPRN_SRR0,r10
 	ld	r10,PACAKMSR(r13)
@@ -1391,7 +455,7 @@
 	MACHINE_CHECK_HANDLER_WINDUP
 	b	machine_check_pSeries
 
-unrecover_mce:
+EXC_COMMON_BEGIN(unrecover_mce)
 	/* Invoke machine_check_exception to print MCE event and panic. */
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	machine_check_exception
@@ -1402,15 +466,155 @@
 1:	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	unrecoverable_exception
 	b	1b
-/*
- * r13 points to the PACA, r9 contains the saved CR,
- * r12 contain the saved SRR1, SRR0 is still ready for return
- * r3 has the faulting address
- * r9 - r13 are saved in paca->exslb.
- * r3 is saved in paca->slb_r3
- * We assume we aren't going to take any exceptions during this procedure.
- */
-slb_miss_realmode:
+
+
+EXC_REAL(data_access, 0x300, 0x380)
+EXC_VIRT(data_access, 0x4300, 0x4380, 0x300)
+TRAMP_KVM_SKIP(PACA_EXGEN, 0x300)
+
+EXC_COMMON_BEGIN(data_access_common)
+	/*
+	 * Here r13 points to the paca, r9 contains the saved CR,
+	 * SRR0 and SRR1 are saved in r11 and r12,
+	 * r9 - r13 are saved in paca->exgen.
+	 */
+	mfspr	r10,SPRN_DAR
+	std	r10,PACA_EXGEN+EX_DAR(r13)
+	mfspr	r10,SPRN_DSISR
+	stw	r10,PACA_EXGEN+EX_DSISR(r13)
+	EXCEPTION_PROLOG_COMMON(0x300, PACA_EXGEN)
+	RECONCILE_IRQ_STATE(r10, r11)
+	ld	r12,_MSR(r1)
+	ld	r3,PACA_EXGEN+EX_DAR(r13)
+	lwz	r4,PACA_EXGEN+EX_DSISR(r13)
+	li	r5,0x300
+	std	r3,_DAR(r1)
+	std	r4,_DSISR(r1)
+BEGIN_MMU_FTR_SECTION
+	b	do_hash_page		/* Try to handle as hpte fault */
+MMU_FTR_SECTION_ELSE
+	b	handle_page_fault
+ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_TYPE_RADIX)
+
+
+EXC_REAL_BEGIN(data_access_slb, 0x380, 0x400)
+	SET_SCRATCH0(r13)
+	EXCEPTION_PROLOG_0(PACA_EXSLB)
+	EXCEPTION_PROLOG_1(PACA_EXSLB, KVMTEST_PR, 0x380)
+	std	r3,PACA_EXSLB+EX_R3(r13)
+	mfspr	r3,SPRN_DAR
+	mfspr	r12,SPRN_SRR1
+	crset	4*cr6+eq
+#ifndef CONFIG_RELOCATABLE
+	b	slb_miss_realmode
+#else
+	/*
+	 * We can't just use a direct branch to slb_miss_realmode
+	 * because the distance from here to there depends on where
+	 * the kernel ends up being put.
+	 */
+	mfctr	r11
+	LOAD_HANDLER(r10, slb_miss_realmode)
+	mtctr	r10
+	bctr
+#endif
+EXC_REAL_END(data_access_slb, 0x380, 0x400)
+
+EXC_VIRT_BEGIN(data_access_slb, 0x4380, 0x4400)
+	SET_SCRATCH0(r13)
+	EXCEPTION_PROLOG_0(PACA_EXSLB)
+	EXCEPTION_PROLOG_1(PACA_EXSLB, NOTEST, 0x380)
+	std	r3,PACA_EXSLB+EX_R3(r13)
+	mfspr	r3,SPRN_DAR
+	mfspr	r12,SPRN_SRR1
+	crset	4*cr6+eq
+#ifndef CONFIG_RELOCATABLE
+	b	slb_miss_realmode
+#else
+	/*
+	 * We can't just use a direct branch to slb_miss_realmode
+	 * because the distance from here to there depends on where
+	 * the kernel ends up being put.
+	 */
+	mfctr	r11
+	LOAD_HANDLER(r10, slb_miss_realmode)
+	mtctr	r10
+	bctr
+#endif
+EXC_VIRT_END(data_access_slb, 0x4380, 0x4400)
+TRAMP_KVM_SKIP(PACA_EXSLB, 0x380)
+
+
+EXC_REAL(instruction_access, 0x400, 0x480)
+EXC_VIRT(instruction_access, 0x4400, 0x4480, 0x400)
+TRAMP_KVM(PACA_EXGEN, 0x400)
+
+EXC_COMMON_BEGIN(instruction_access_common)
+	EXCEPTION_PROLOG_COMMON(0x400, PACA_EXGEN)
+	RECONCILE_IRQ_STATE(r10, r11)
+	ld	r12,_MSR(r1)
+	ld	r3,_NIP(r1)
+	andis.	r4,r12,0x5820
+	li	r5,0x400
+	std	r3,_DAR(r1)
+	std	r4,_DSISR(r1)
+BEGIN_MMU_FTR_SECTION
+	b	do_hash_page		/* Try to handle as hpte fault */
+MMU_FTR_SECTION_ELSE
+	b	handle_page_fault
+ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_TYPE_RADIX)
+
+
+EXC_REAL_BEGIN(instruction_access_slb, 0x480, 0x500)
+	SET_SCRATCH0(r13)
+	EXCEPTION_PROLOG_0(PACA_EXSLB)
+	EXCEPTION_PROLOG_1(PACA_EXSLB, KVMTEST_PR, 0x480)
+	std	r3,PACA_EXSLB+EX_R3(r13)
+	mfspr	r3,SPRN_SRR0		/* SRR0 is faulting address */
+	mfspr	r12,SPRN_SRR1
+	crclr	4*cr6+eq
+#ifndef CONFIG_RELOCATABLE
+	b	slb_miss_realmode
+#else
+	mfctr	r11
+	LOAD_HANDLER(r10, slb_miss_realmode)
+	mtctr	r10
+	bctr
+#endif
+EXC_REAL_END(instruction_access_slb, 0x480, 0x500)
+
+EXC_VIRT_BEGIN(instruction_access_slb, 0x4480, 0x4500)
+	SET_SCRATCH0(r13)
+	EXCEPTION_PROLOG_0(PACA_EXSLB)
+	EXCEPTION_PROLOG_1(PACA_EXSLB, NOTEST, 0x480)
+	std	r3,PACA_EXSLB+EX_R3(r13)
+	mfspr	r3,SPRN_SRR0		/* SRR0 is faulting address */
+	mfspr	r12,SPRN_SRR1
+	crclr	4*cr6+eq
+#ifndef CONFIG_RELOCATABLE
+	b	slb_miss_realmode
+#else
+	mfctr	r11
+	LOAD_HANDLER(r10, slb_miss_realmode)
+	mtctr	r10
+	bctr
+#endif
+EXC_VIRT_END(instruction_access_slb, 0x4480, 0x4500)
+TRAMP_KVM(PACA_EXSLB, 0x480)
+
+
+/* This handler is used by both 0x380 and 0x480 slb miss interrupts */
+EXC_COMMON_BEGIN(slb_miss_realmode)
+	/*
+	 * r13 points to the PACA, r9 contains the saved CR,
+	 * r12 contain the saved SRR1, SRR0 is still ready for return
+	 * r3 has the faulting address
+	 * r9 - r13 are saved in paca->exslb.
+	 * r3 is saved in paca->slb_r3
+ 	 * cr6.eq is set for a D-SLB miss, clear for a I-SLB miss
+	 * We assume we aren't going to take any exceptions during this
+	 * procedure.
+	 */
 	mflr	r10
 #ifdef CONFIG_RELOCATABLE
 	mtctr	r11
@@ -1418,29 +622,31 @@
 
 	stw	r9,PACA_EXSLB+EX_CCR(r13)	/* save CR in exc. frame */
 	std	r10,PACA_EXSLB+EX_LR(r13)	/* save LR */
+	std	r3,PACA_EXSLB+EX_DAR(r13)
 
+	crset	4*cr0+eq
 #ifdef CONFIG_PPC_STD_MMU_64
 BEGIN_MMU_FTR_SECTION
 	bl	slb_allocate_realmode
 END_MMU_FTR_SECTION_IFCLR(MMU_FTR_TYPE_RADIX)
 #endif
-	/* All done -- return from exception. */
 
 	ld	r10,PACA_EXSLB+EX_LR(r13)
 	ld	r3,PACA_EXSLB+EX_R3(r13)
 	lwz	r9,PACA_EXSLB+EX_CCR(r13)	/* get saved CR */
-
 	mtlr	r10
+
+	beq	8f		/* if bad address, make full stack frame */
+
 	andi.	r10,r12,MSR_RI	/* check for unrecoverable exception */
-BEGIN_MMU_FTR_SECTION
 	beq-	2f
-FTR_SECTION_ELSE
-	b	2f
-ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_TYPE_RADIX)
+
+	/* All done -- return from exception. */
 
 .machine	push
 .machine	"power4"
 	mtcrf	0x80,r9
+	mtcrf	0x02,r9		/* I/D indication is in cr6 */
 	mtcrf	0x01,r9		/* slb_allocate uses cr0 and cr7 */
 .machine	pop
 
@@ -1454,7 +660,6 @@
 	b	.	/* prevent speculative execution */
 
 2:	mfspr	r11,SPRN_SRR0
-	ld	r10,PACAKBASE(r13)
 	LOAD_HANDLER(r10,unrecov_slb)
 	mtspr	SPRN_SRR0,r10
 	ld	r10,PACAKMSR(r13)
@@ -1462,7 +667,15 @@
 	rfid
 	b	.
 
-unrecov_slb:
+8:	mfspr	r11,SPRN_SRR0
+	LOAD_HANDLER(r10,bad_addr_slb)
+	mtspr	SPRN_SRR0,r10
+	ld	r10,PACAKMSR(r13)
+	mtspr	SPRN_SRR1,r10
+	rfid
+	b	.
+
+EXC_COMMON_BEGIN(unrecov_slb)
 	EXCEPTION_PROLOG_COMMON(0x4100, PACA_EXSLB)
 	RECONCILE_IRQ_STATE(r10, r11)
 	bl	save_nvgprs
@@ -1470,9 +683,701 @@
 	bl	unrecoverable_exception
 	b	1b
 
+EXC_COMMON_BEGIN(bad_addr_slb)
+	EXCEPTION_PROLOG_COMMON(0x380, PACA_EXSLB)
+	RECONCILE_IRQ_STATE(r10, r11)
+	ld	r3, PACA_EXSLB+EX_DAR(r13)
+	std	r3, _DAR(r1)
+	beq	cr6, 2f
+	li	r10, 0x480		/* fix trap number for I-SLB miss */
+	std	r10, _TRAP(r1)
+2:	bl	save_nvgprs
+	addi	r3, r1, STACK_FRAME_OVERHEAD
+	bl	slb_miss_bad_addr
+	b	ret_from_except
+
+EXC_REAL_BEGIN(hardware_interrupt, 0x500, 0x600)
+	.globl hardware_interrupt_hv;
+hardware_interrupt_hv:
+	BEGIN_FTR_SECTION
+		_MASKABLE_EXCEPTION_PSERIES(0x500, hardware_interrupt_common,
+					    EXC_HV, SOFTEN_TEST_HV)
+do_kvm_H0x500:
+		KVM_HANDLER(PACA_EXGEN, EXC_HV, 0x502)
+	FTR_SECTION_ELSE
+		_MASKABLE_EXCEPTION_PSERIES(0x500, hardware_interrupt_common,
+					    EXC_STD, SOFTEN_TEST_PR)
+do_kvm_0x500:
+		KVM_HANDLER(PACA_EXGEN, EXC_STD, 0x500)
+	ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206)
+EXC_REAL_END(hardware_interrupt, 0x500, 0x600)
+
+EXC_VIRT_BEGIN(hardware_interrupt, 0x4500, 0x4600)
+	.globl hardware_interrupt_relon_hv;
+hardware_interrupt_relon_hv:
+	BEGIN_FTR_SECTION
+		_MASKABLE_RELON_EXCEPTION_PSERIES(0x500, hardware_interrupt_common, EXC_HV, SOFTEN_TEST_HV)
+	FTR_SECTION_ELSE
+		_MASKABLE_RELON_EXCEPTION_PSERIES(0x500, hardware_interrupt_common, EXC_STD, SOFTEN_TEST_PR)
+	ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE)
+EXC_VIRT_END(hardware_interrupt, 0x4500, 0x4600)
+
+EXC_COMMON_ASYNC(hardware_interrupt_common, 0x500, do_IRQ)
+
+
+EXC_REAL(alignment, 0x600, 0x700)
+EXC_VIRT(alignment, 0x4600, 0x4700, 0x600)
+TRAMP_KVM(PACA_EXGEN, 0x600)
+EXC_COMMON_BEGIN(alignment_common)
+	mfspr	r10,SPRN_DAR
+	std	r10,PACA_EXGEN+EX_DAR(r13)
+	mfspr	r10,SPRN_DSISR
+	stw	r10,PACA_EXGEN+EX_DSISR(r13)
+	EXCEPTION_PROLOG_COMMON(0x600, PACA_EXGEN)
+	ld	r3,PACA_EXGEN+EX_DAR(r13)
+	lwz	r4,PACA_EXGEN+EX_DSISR(r13)
+	std	r3,_DAR(r1)
+	std	r4,_DSISR(r1)
+	bl	save_nvgprs
+	RECONCILE_IRQ_STATE(r10, r11)
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	bl	alignment_exception
+	b	ret_from_except
+
+
+EXC_REAL(program_check, 0x700, 0x800)
+EXC_VIRT(program_check, 0x4700, 0x4800, 0x700)
+TRAMP_KVM(PACA_EXGEN, 0x700)
+EXC_COMMON_BEGIN(program_check_common)
+	EXCEPTION_PROLOG_COMMON(0x700, PACA_EXGEN)
+	bl	save_nvgprs
+	RECONCILE_IRQ_STATE(r10, r11)
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	bl	program_check_exception
+	b	ret_from_except
+
+
+EXC_REAL(fp_unavailable, 0x800, 0x900)
+EXC_VIRT(fp_unavailable, 0x4800, 0x4900, 0x800)
+TRAMP_KVM(PACA_EXGEN, 0x800)
+EXC_COMMON_BEGIN(fp_unavailable_common)
+	EXCEPTION_PROLOG_COMMON(0x800, PACA_EXGEN)
+	bne	1f			/* if from user, just load it up */
+	bl	save_nvgprs
+	RECONCILE_IRQ_STATE(r10, r11)
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	bl	kernel_fp_unavailable_exception
+	BUG_OPCODE
+1:
+#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
+BEGIN_FTR_SECTION
+	/* Test if 2 TM state bits are zero.  If non-zero (ie. userspace was in
+	 * transaction), go do TM stuff
+	 */
+	rldicl.	r0, r12, (64-MSR_TS_LG), (64-2)
+	bne-	2f
+END_FTR_SECTION_IFSET(CPU_FTR_TM)
+#endif
+	bl	load_up_fpu
+	b	fast_exception_return
+#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
+2:	/* User process was in a transaction */
+	bl	save_nvgprs
+	RECONCILE_IRQ_STATE(r10, r11)
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	bl	fp_unavailable_tm
+	b	ret_from_except
+#endif
+
+
+EXC_REAL_MASKABLE(decrementer, 0x900, 0x980)
+EXC_VIRT_MASKABLE(decrementer, 0x4900, 0x4980, 0x900)
+TRAMP_KVM(PACA_EXGEN, 0x900)
+EXC_COMMON_ASYNC(decrementer_common, 0x900, timer_interrupt)
+
+
+EXC_REAL_HV(hdecrementer, 0x980, 0xa00)
+EXC_VIRT_HV(hdecrementer, 0x4980, 0x4a00, 0x980)
+TRAMP_KVM_HV(PACA_EXGEN, 0x980)
+EXC_COMMON(hdecrementer_common, 0x980, hdec_interrupt)
+
+
+EXC_REAL_MASKABLE(doorbell_super, 0xa00, 0xb00)
+EXC_VIRT_MASKABLE(doorbell_super, 0x4a00, 0x4b00, 0xa00)
+TRAMP_KVM(PACA_EXGEN, 0xa00)
+#ifdef CONFIG_PPC_DOORBELL
+EXC_COMMON_ASYNC(doorbell_super_common, 0xa00, doorbell_exception)
+#else
+EXC_COMMON_ASYNC(doorbell_super_common, 0xa00, unknown_exception)
+#endif
+
+
+EXC_REAL(trap_0b, 0xb00, 0xc00)
+EXC_VIRT(trap_0b, 0x4b00, 0x4c00, 0xb00)
+TRAMP_KVM(PACA_EXGEN, 0xb00)
+EXC_COMMON(trap_0b_common, 0xb00, unknown_exception)
+
+
+#define LOAD_SYSCALL_HANDLER(reg)				\
+	ld	reg,PACAKBASE(r13);				\
+	ori	reg,reg,(ABS_ADDR(system_call_common))@l;
+
+/* Syscall routine is used twice, in reloc-off and reloc-on paths */
+#define SYSCALL_PSERIES_1 					\
+BEGIN_FTR_SECTION						\
+	cmpdi	r0,0x1ebe ; 					\
+	beq-	1f ;						\
+END_FTR_SECTION_IFSET(CPU_FTR_REAL_LE)				\
+	mr	r9,r13 ;					\
+	GET_PACA(r13) ;						\
+	mfspr	r11,SPRN_SRR0 ;					\
+0:
+
+#define SYSCALL_PSERIES_2_RFID 					\
+	mfspr	r12,SPRN_SRR1 ;					\
+	LOAD_SYSCALL_HANDLER(r10) ; 				\
+	mtspr	SPRN_SRR0,r10 ; 				\
+	ld	r10,PACAKMSR(r13) ;				\
+	mtspr	SPRN_SRR1,r10 ; 				\
+	rfid ; 							\
+	b	. ;	/* prevent speculative execution */
+
+#define SYSCALL_PSERIES_3					\
+	/* Fast LE/BE switch system call */			\
+1:	mfspr	r12,SPRN_SRR1 ;					\
+	xori	r12,r12,MSR_LE ;				\
+	mtspr	SPRN_SRR1,r12 ;					\
+	rfid ;		/* return to userspace */		\
+	b	. ;	/* prevent speculative execution */
+
+#if defined(CONFIG_RELOCATABLE)
+	/*
+	 * We can't branch directly so we do it via the CTR which
+	 * is volatile across system calls.
+	 */
+#define SYSCALL_PSERIES_2_DIRECT				\
+	LOAD_SYSCALL_HANDLER(r12) ;				\
+	mtctr	r12 ;						\
+	mfspr	r12,SPRN_SRR1 ;					\
+	li	r10,MSR_RI ;					\
+	mtmsrd 	r10,1 ;						\
+	bctr ;
+#else
+	/* We can branch directly */
+#define SYSCALL_PSERIES_2_DIRECT				\
+	mfspr	r12,SPRN_SRR1 ;					\
+	li	r10,MSR_RI ;					\
+	mtmsrd 	r10,1 ;			/* Set RI (EE=0) */	\
+	b	system_call_common ;
+#endif
+
+EXC_REAL_BEGIN(system_call, 0xc00, 0xd00)
+	 /*
+	  * If CONFIG_KVM_BOOK3S_64_HANDLER is set, save the PPR (on systems
+	  * that support it) before changing to HMT_MEDIUM. That allows the KVM
+	  * code to save that value into the guest state (it is the guest's PPR
+	  * value). Otherwise just change to HMT_MEDIUM as userspace has
+	  * already saved the PPR.
+	  */
+#ifdef CONFIG_KVM_BOOK3S_64_HANDLER
+	SET_SCRATCH0(r13)
+	GET_PACA(r13)
+	std	r9,PACA_EXGEN+EX_R9(r13)
+	OPT_GET_SPR(r9, SPRN_PPR, CPU_FTR_HAS_PPR);
+	HMT_MEDIUM;
+	std	r10,PACA_EXGEN+EX_R10(r13)
+	OPT_SAVE_REG_TO_PACA(PACA_EXGEN+EX_PPR, r9, CPU_FTR_HAS_PPR);
+	mfcr	r9
+	KVMTEST_PR(0xc00)
+	GET_SCRATCH0(r13)
+#else
+	HMT_MEDIUM;
+#endif
+	SYSCALL_PSERIES_1
+	SYSCALL_PSERIES_2_RFID
+	SYSCALL_PSERIES_3
+EXC_REAL_END(system_call, 0xc00, 0xd00)
+
+EXC_VIRT_BEGIN(system_call, 0x4c00, 0x4d00)
+	HMT_MEDIUM
+	SYSCALL_PSERIES_1
+	SYSCALL_PSERIES_2_DIRECT
+	SYSCALL_PSERIES_3
+EXC_VIRT_END(system_call, 0x4c00, 0x4d00)
+
+TRAMP_KVM(PACA_EXGEN, 0xc00)
+
+
+EXC_REAL(single_step, 0xd00, 0xe00)
+EXC_VIRT(single_step, 0x4d00, 0x4e00, 0xd00)
+TRAMP_KVM(PACA_EXGEN, 0xd00)
+EXC_COMMON(single_step_common, 0xd00, single_step_exception)
+
+EXC_REAL_OOL_HV(h_data_storage, 0xe00, 0xe20)
+EXC_VIRT_NONE(0x4e00, 0x4e20)
+TRAMP_KVM_HV_SKIP(PACA_EXGEN, 0xe00)
+EXC_COMMON_BEGIN(h_data_storage_common)
+	mfspr   r10,SPRN_HDAR
+	std     r10,PACA_EXGEN+EX_DAR(r13)
+	mfspr   r10,SPRN_HDSISR
+	stw     r10,PACA_EXGEN+EX_DSISR(r13)
+	EXCEPTION_PROLOG_COMMON(0xe00, PACA_EXGEN)
+	bl      save_nvgprs
+	RECONCILE_IRQ_STATE(r10, r11)
+	addi    r3,r1,STACK_FRAME_OVERHEAD
+	bl      unknown_exception
+	b       ret_from_except
+
+
+EXC_REAL_OOL_HV(h_instr_storage, 0xe20, 0xe40)
+EXC_VIRT_NONE(0x4e20, 0x4e40)
+TRAMP_KVM_HV(PACA_EXGEN, 0xe20)
+EXC_COMMON(h_instr_storage_common, 0xe20, unknown_exception)
+
+
+EXC_REAL_OOL_HV(emulation_assist, 0xe40, 0xe60)
+EXC_VIRT_OOL_HV(emulation_assist, 0x4e40, 0x4e60, 0xe40)
+TRAMP_KVM_HV(PACA_EXGEN, 0xe40)
+EXC_COMMON(emulation_assist_common, 0xe40, emulation_assist_interrupt)
+
+
+/*
+ * hmi_exception trampoline is a special case. It jumps to hmi_exception_early
+ * first, and then eventaully from there to the trampoline to get into virtual
+ * mode.
+ */
+__EXC_REAL_OOL_HV_DIRECT(hmi_exception, 0xe60, 0xe80, hmi_exception_early)
+__TRAMP_REAL_REAL_OOL_MASKABLE_HV(hmi_exception, 0xe60)
+EXC_VIRT_NONE(0x4e60, 0x4e80)
+TRAMP_KVM_HV(PACA_EXGEN, 0xe60)
+TRAMP_REAL_BEGIN(hmi_exception_early)
+	EXCEPTION_PROLOG_1(PACA_EXGEN, KVMTEST_HV, 0xe60)
+	mr	r10,r1			/* Save r1			*/
+	ld	r1,PACAEMERGSP(r13)	/* Use emergency stack		*/
+	subi	r1,r1,INT_FRAME_SIZE	/* alloc stack frame		*/
+	std	r9,_CCR(r1)		/* save CR in stackframe	*/
+	mfspr	r11,SPRN_HSRR0		/* Save HSRR0 */
+	std	r11,_NIP(r1)		/* save HSRR0 in stackframe	*/
+	mfspr	r12,SPRN_HSRR1		/* Save SRR1 */
+	std	r12,_MSR(r1)		/* save SRR1 in stackframe	*/
+	std	r10,0(r1)		/* make stack chain pointer	*/
+	std	r0,GPR0(r1)		/* save r0 in stackframe	*/
+	std	r10,GPR1(r1)		/* save r1 in stackframe	*/
+	EXCEPTION_PROLOG_COMMON_2(PACA_EXGEN)
+	EXCEPTION_PROLOG_COMMON_3(0xe60)
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	bl	hmi_exception_realmode
+	/* Windup the stack. */
+	/* Move original HSRR0 and HSRR1 into the respective regs */
+	ld	r9,_MSR(r1)
+	mtspr	SPRN_HSRR1,r9
+	ld	r3,_NIP(r1)
+	mtspr	SPRN_HSRR0,r3
+	ld	r9,_CTR(r1)
+	mtctr	r9
+	ld	r9,_XER(r1)
+	mtxer	r9
+	ld	r9,_LINK(r1)
+	mtlr	r9
+	REST_GPR(0, r1)
+	REST_8GPRS(2, r1)
+	REST_GPR(10, r1)
+	ld	r11,_CCR(r1)
+	mtcr	r11
+	REST_GPR(11, r1)
+	REST_2GPRS(12, r1)
+	/* restore original r1. */
+	ld	r1,GPR1(r1)
+
+	/*
+	 * Go to virtual mode and pull the HMI event information from
+	 * firmware.
+	 */
+	.globl hmi_exception_after_realmode
+hmi_exception_after_realmode:
+	SET_SCRATCH0(r13)
+	EXCEPTION_PROLOG_0(PACA_EXGEN)
+	b	tramp_real_hmi_exception
+
+EXC_COMMON_ASYNC(hmi_exception_common, 0xe60, handle_hmi_exception)
+
+
+EXC_REAL_OOL_MASKABLE_HV(h_doorbell, 0xe80, 0xea0)
+EXC_VIRT_OOL_MASKABLE_HV(h_doorbell, 0x4e80, 0x4ea0, 0xe80)
+TRAMP_KVM_HV(PACA_EXGEN, 0xe80)
+#ifdef CONFIG_PPC_DOORBELL
+EXC_COMMON_ASYNC(h_doorbell_common, 0xe80, doorbell_exception)
+#else
+EXC_COMMON_ASYNC(h_doorbell_common, 0xe80, unknown_exception)
+#endif
+
+
+EXC_REAL_OOL_MASKABLE_HV(h_virt_irq, 0xea0, 0xec0)
+EXC_VIRT_OOL_MASKABLE_HV(h_virt_irq, 0x4ea0, 0x4ec0, 0xea0)
+TRAMP_KVM_HV(PACA_EXGEN, 0xea0)
+EXC_COMMON_ASYNC(h_virt_irq_common, 0xea0, do_IRQ)
+
+
+EXC_REAL_NONE(0xec0, 0xf00)
+EXC_VIRT_NONE(0x4ec0, 0x4f00)
+
+
+EXC_REAL_OOL(performance_monitor, 0xf00, 0xf20)
+EXC_VIRT_OOL(performance_monitor, 0x4f00, 0x4f20, 0xf00)
+TRAMP_KVM(PACA_EXGEN, 0xf00)
+EXC_COMMON_ASYNC(performance_monitor_common, 0xf00, performance_monitor_exception)
+
+
+EXC_REAL_OOL(altivec_unavailable, 0xf20, 0xf40)
+EXC_VIRT_OOL(altivec_unavailable, 0x4f20, 0x4f40, 0xf20)
+TRAMP_KVM(PACA_EXGEN, 0xf20)
+EXC_COMMON_BEGIN(altivec_unavailable_common)
+	EXCEPTION_PROLOG_COMMON(0xf20, PACA_EXGEN)
+#ifdef CONFIG_ALTIVEC
+BEGIN_FTR_SECTION
+	beq	1f
+#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
+  BEGIN_FTR_SECTION_NESTED(69)
+	/* Test if 2 TM state bits are zero.  If non-zero (ie. userspace was in
+	 * transaction), go do TM stuff
+	 */
+	rldicl.	r0, r12, (64-MSR_TS_LG), (64-2)
+	bne-	2f
+  END_FTR_SECTION_NESTED(CPU_FTR_TM, CPU_FTR_TM, 69)
+#endif
+	bl	load_up_altivec
+	b	fast_exception_return
+#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
+2:	/* User process was in a transaction */
+	bl	save_nvgprs
+	RECONCILE_IRQ_STATE(r10, r11)
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	bl	altivec_unavailable_tm
+	b	ret_from_except
+#endif
+1:
+END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
+#endif
+	bl	save_nvgprs
+	RECONCILE_IRQ_STATE(r10, r11)
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	bl	altivec_unavailable_exception
+	b	ret_from_except
+
+
+EXC_REAL_OOL(vsx_unavailable, 0xf40, 0xf60)
+EXC_VIRT_OOL(vsx_unavailable, 0x4f40, 0x4f60, 0xf40)
+TRAMP_KVM(PACA_EXGEN, 0xf40)
+EXC_COMMON_BEGIN(vsx_unavailable_common)
+	EXCEPTION_PROLOG_COMMON(0xf40, PACA_EXGEN)
+#ifdef CONFIG_VSX
+BEGIN_FTR_SECTION
+	beq	1f
+#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
+  BEGIN_FTR_SECTION_NESTED(69)
+	/* Test if 2 TM state bits are zero.  If non-zero (ie. userspace was in
+	 * transaction), go do TM stuff
+	 */
+	rldicl.	r0, r12, (64-MSR_TS_LG), (64-2)
+	bne-	2f
+  END_FTR_SECTION_NESTED(CPU_FTR_TM, CPU_FTR_TM, 69)
+#endif
+	b	load_up_vsx
+#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
+2:	/* User process was in a transaction */
+	bl	save_nvgprs
+	RECONCILE_IRQ_STATE(r10, r11)
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	bl	vsx_unavailable_tm
+	b	ret_from_except
+#endif
+1:
+END_FTR_SECTION_IFSET(CPU_FTR_VSX)
+#endif
+	bl	save_nvgprs
+	RECONCILE_IRQ_STATE(r10, r11)
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	bl	vsx_unavailable_exception
+	b	ret_from_except
+
+
+EXC_REAL_OOL(facility_unavailable, 0xf60, 0xf80)
+EXC_VIRT_OOL(facility_unavailable, 0x4f60, 0x4f80, 0xf60)
+TRAMP_KVM(PACA_EXGEN, 0xf60)
+EXC_COMMON(facility_unavailable_common, 0xf60, facility_unavailable_exception)
+
+
+EXC_REAL_OOL_HV(h_facility_unavailable, 0xf80, 0xfa0)
+EXC_VIRT_OOL_HV(h_facility_unavailable, 0x4f80, 0x4fa0, 0xf80)
+TRAMP_KVM_HV(PACA_EXGEN, 0xf80)
+EXC_COMMON(h_facility_unavailable_common, 0xf80, facility_unavailable_exception)
+
+
+EXC_REAL_NONE(0xfa0, 0x1200)
+EXC_VIRT_NONE(0x4fa0, 0x5200)
+
+#ifdef CONFIG_CBE_RAS
+EXC_REAL_HV(cbe_system_error, 0x1200, 0x1300)
+EXC_VIRT_NONE(0x5200, 0x5300)
+TRAMP_KVM_HV_SKIP(PACA_EXGEN, 0x1200)
+EXC_COMMON(cbe_system_error_common, 0x1200, cbe_system_error_exception)
+#else /* CONFIG_CBE_RAS */
+EXC_REAL_NONE(0x1200, 0x1300)
+EXC_VIRT_NONE(0x5200, 0x5300)
+#endif
+
+
+EXC_REAL(instruction_breakpoint, 0x1300, 0x1400)
+EXC_VIRT(instruction_breakpoint, 0x5300, 0x5400, 0x1300)
+TRAMP_KVM_SKIP(PACA_EXGEN, 0x1300)
+EXC_COMMON(instruction_breakpoint_common, 0x1300, instruction_breakpoint_exception)
+
+EXC_REAL_NONE(0x1400, 0x1500)
+EXC_VIRT_NONE(0x5400, 0x5500)
+
+EXC_REAL_BEGIN(denorm_exception_hv, 0x1500, 0x1600)
+	mtspr	SPRN_SPRG_HSCRATCH0,r13
+	EXCEPTION_PROLOG_0(PACA_EXGEN)
+	EXCEPTION_PROLOG_1(PACA_EXGEN, NOTEST, 0x1500)
+
+#ifdef CONFIG_PPC_DENORMALISATION
+	mfspr	r10,SPRN_HSRR1
+	mfspr	r11,SPRN_HSRR0		/* save HSRR0 */
+	andis.	r10,r10,(HSRR1_DENORM)@h /* denorm? */
+	addi	r11,r11,-4		/* HSRR0 is next instruction */
+	bne+	denorm_assist
+#endif
+
+	KVMTEST_PR(0x1500)
+	EXCEPTION_PROLOG_PSERIES_1(denorm_common, EXC_HV)
+EXC_REAL_END(denorm_exception_hv, 0x1500, 0x1600)
+
+#ifdef CONFIG_PPC_DENORMALISATION
+EXC_VIRT_BEGIN(denorm_exception, 0x5500, 0x5600)
+	b	exc_real_0x1500_denorm_exception_hv
+EXC_VIRT_END(denorm_exception, 0x5500, 0x5600)
+#else
+EXC_VIRT_NONE(0x5500, 0x5600)
+#endif
+
+TRAMP_KVM_SKIP(PACA_EXGEN, 0x1500)
+
+#ifdef CONFIG_PPC_DENORMALISATION
+TRAMP_REAL_BEGIN(denorm_assist)
+BEGIN_FTR_SECTION
+/*
+ * To denormalise we need to move a copy of the register to itself.
+ * For POWER6 do that here for all FP regs.
+ */
+	mfmsr	r10
+	ori	r10,r10,(MSR_FP|MSR_FE0|MSR_FE1)
+	xori	r10,r10,(MSR_FE0|MSR_FE1)
+	mtmsrd	r10
+	sync
+
+#define FMR2(n)  fmr (n), (n) ; fmr n+1, n+1
+#define FMR4(n)  FMR2(n) ; FMR2(n+2)
+#define FMR8(n)  FMR4(n) ; FMR4(n+4)
+#define FMR16(n) FMR8(n) ; FMR8(n+8)
+#define FMR32(n) FMR16(n) ; FMR16(n+16)
+	FMR32(0)
+
+FTR_SECTION_ELSE
+/*
+ * To denormalise we need to move a copy of the register to itself.
+ * For POWER7 do that here for the first 32 VSX registers only.
+ */
+	mfmsr	r10
+	oris	r10,r10,MSR_VSX@h
+	mtmsrd	r10
+	sync
+
+#define XVCPSGNDP2(n) XVCPSGNDP(n,n,n) ; XVCPSGNDP(n+1,n+1,n+1)
+#define XVCPSGNDP4(n) XVCPSGNDP2(n) ; XVCPSGNDP2(n+2)
+#define XVCPSGNDP8(n) XVCPSGNDP4(n) ; XVCPSGNDP4(n+4)
+#define XVCPSGNDP16(n) XVCPSGNDP8(n) ; XVCPSGNDP8(n+8)
+#define XVCPSGNDP32(n) XVCPSGNDP16(n) ; XVCPSGNDP16(n+16)
+	XVCPSGNDP32(0)
+
+ALT_FTR_SECTION_END_IFCLR(CPU_FTR_ARCH_206)
+
+BEGIN_FTR_SECTION
+	b	denorm_done
+END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_207S)
+/*
+ * To denormalise we need to move a copy of the register to itself.
+ * For POWER8 we need to do that for all 64 VSX registers
+ */
+	XVCPSGNDP32(32)
+denorm_done:
+	mtspr	SPRN_HSRR0,r11
+	mtcrf	0x80,r9
+	ld	r9,PACA_EXGEN+EX_R9(r13)
+	RESTORE_PPR_PACA(PACA_EXGEN, r10)
+BEGIN_FTR_SECTION
+	ld	r10,PACA_EXGEN+EX_CFAR(r13)
+	mtspr	SPRN_CFAR,r10
+END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
+	ld	r10,PACA_EXGEN+EX_R10(r13)
+	ld	r11,PACA_EXGEN+EX_R11(r13)
+	ld	r12,PACA_EXGEN+EX_R12(r13)
+	ld	r13,PACA_EXGEN+EX_R13(r13)
+	HRFID
+	b	.
+#endif
+
+EXC_COMMON_HV(denorm_common, 0x1500, unknown_exception)
+
+
+#ifdef CONFIG_CBE_RAS
+EXC_REAL_HV(cbe_maintenance, 0x1600, 0x1700)
+EXC_VIRT_NONE(0x5600, 0x5700)
+TRAMP_KVM_HV_SKIP(PACA_EXGEN, 0x1600)
+EXC_COMMON(cbe_maintenance_common, 0x1600, cbe_maintenance_exception)
+#else /* CONFIG_CBE_RAS */
+EXC_REAL_NONE(0x1600, 0x1700)
+EXC_VIRT_NONE(0x5600, 0x5700)
+#endif
+
+
+EXC_REAL(altivec_assist, 0x1700, 0x1800)
+EXC_VIRT(altivec_assist, 0x5700, 0x5800, 0x1700)
+TRAMP_KVM(PACA_EXGEN, 0x1700)
+#ifdef CONFIG_ALTIVEC
+EXC_COMMON(altivec_assist_common, 0x1700, altivec_assist_exception)
+#else
+EXC_COMMON(altivec_assist_common, 0x1700, unknown_exception)
+#endif
+
+
+#ifdef CONFIG_CBE_RAS
+EXC_REAL_HV(cbe_thermal, 0x1800, 0x1900)
+EXC_VIRT_NONE(0x5800, 0x5900)
+TRAMP_KVM_HV_SKIP(PACA_EXGEN, 0x1800)
+EXC_COMMON(cbe_thermal_common, 0x1800, cbe_thermal_exception)
+#else /* CONFIG_CBE_RAS */
+EXC_REAL_NONE(0x1800, 0x1900)
+EXC_VIRT_NONE(0x5800, 0x5900)
+#endif
+
+
+/*
+ * An interrupt came in while soft-disabled. We set paca->irq_happened, then:
+ * - If it was a decrementer interrupt, we bump the dec to max and and return.
+ * - If it was a doorbell we return immediately since doorbells are edge
+ *   triggered and won't automatically refire.
+ * - If it was a HMI we return immediately since we handled it in realmode
+ *   and it won't refire.
+ * - else we hard disable and return.
+ * This is called with r10 containing the value to OR to the paca field.
+ */
+#define MASKED_INTERRUPT(_H)				\
+masked_##_H##interrupt:					\
+	std	r11,PACA_EXGEN+EX_R11(r13);		\
+	lbz	r11,PACAIRQHAPPENED(r13);		\
+	or	r11,r11,r10;				\
+	stb	r11,PACAIRQHAPPENED(r13);		\
+	cmpwi	r10,PACA_IRQ_DEC;			\
+	bne	1f;					\
+	lis	r10,0x7fff;				\
+	ori	r10,r10,0xffff;				\
+	mtspr	SPRN_DEC,r10;				\
+	b	2f;					\
+1:	cmpwi	r10,PACA_IRQ_DBELL;			\
+	beq	2f;					\
+	cmpwi	r10,PACA_IRQ_HMI;			\
+	beq	2f;					\
+	mfspr	r10,SPRN_##_H##SRR1;			\
+	rldicl	r10,r10,48,1; /* clear MSR_EE */	\
+	rotldi	r10,r10,16;				\
+	mtspr	SPRN_##_H##SRR1,r10;			\
+2:	mtcrf	0x80,r9;				\
+	ld	r9,PACA_EXGEN+EX_R9(r13);		\
+	ld	r10,PACA_EXGEN+EX_R10(r13);		\
+	ld	r11,PACA_EXGEN+EX_R11(r13);		\
+	GET_SCRATCH0(r13);				\
+	##_H##rfid;					\
+	b	.
+
+/*
+ * Real mode exceptions actually use this too, but alternate
+ * instruction code patches (which end up in the common .text area)
+ * cannot reach these if they are put there.
+ */
+USE_FIXED_SECTION(virt_trampolines)
+	MASKED_INTERRUPT()
+	MASKED_INTERRUPT(H)
+
+#ifdef CONFIG_KVM_BOOK3S_64_HANDLER
+TRAMP_REAL_BEGIN(kvmppc_skip_interrupt)
+	/*
+	 * Here all GPRs are unchanged from when the interrupt happened
+	 * except for r13, which is saved in SPRG_SCRATCH0.
+	 */
+	mfspr	r13, SPRN_SRR0
+	addi	r13, r13, 4
+	mtspr	SPRN_SRR0, r13
+	GET_SCRATCH0(r13)
+	rfid
+	b	.
+
+TRAMP_REAL_BEGIN(kvmppc_skip_Hinterrupt)
+	/*
+	 * Here all GPRs are unchanged from when the interrupt happened
+	 * except for r13, which is saved in SPRG_SCRATCH0.
+	 */
+	mfspr	r13, SPRN_HSRR0
+	addi	r13, r13, 4
+	mtspr	SPRN_HSRR0, r13
+	GET_SCRATCH0(r13)
+	hrfid
+	b	.
+#endif
+
+/*
+ * Ensure that any handlers that get invoked from the exception prologs
+ * above are below the first 64KB (0x10000) of the kernel image because
+ * the prologs assemble the addresses of these handlers using the
+ * LOAD_HANDLER macro, which uses an ori instruction.
+ */
+
+/*** Common interrupt handlers ***/
+
+
+	/*
+	 * Relocation-on interrupts: A subset of the interrupts can be delivered
+	 * with IR=1/DR=1, if AIL==2 and MSR.HV won't be changed by delivering
+	 * it.  Addresses are the same as the original interrupt addresses, but
+	 * offset by 0xc000000000004000.
+	 * It's impossible to receive interrupts below 0x300 via this mechanism.
+	 * KVM: None of these traps are from the guest ; anything that escalated
+	 * to HV=1 from HV=0 is delivered via real mode handlers.
+	 */
+
+	/*
+	 * This uses the standard macro, since the original 0x300 vector
+	 * only has extra guff for STAB-based processors -- which never
+	 * come here.
+	 */
+
+EXC_COMMON_BEGIN(ppc64_runlatch_on_trampoline)
+	b	__ppc64_runlatch_on
+
+USE_FIXED_SECTION(virt_trampolines)
+	/*
+	 * The __end_interrupts marker must be past the out-of-line (OOL)
+	 * handlers, so that they are copied to real address 0x100 when running
+	 * a relocatable kernel. This ensures they can be reached from the short
+	 * trampoline handlers (like 0x4f00, 0x4f20, etc.) which branch
+	 * directly, without using LOAD_HANDLER().
+	 */
+	.align	7
+	.globl	__end_interrupts
+__end_interrupts:
+DEFINE_FIXED_SYMBOL(__end_interrupts)
 
 #ifdef CONFIG_PPC_970_NAP
-power4_fixup_nap:
+TRAMP_REAL_BEGIN(power4_fixup_nap)
 	andc	r9,r9,r10
 	std	r9,TI_LOCAL_FLAGS(r11)
 	ld	r10,_LINK(r1)		/* make idle task do the */
@@ -1480,6 +1385,13 @@
 	blr
 #endif
 
+CLOSE_FIXED_SECTION(real_vectors);
+CLOSE_FIXED_SECTION(real_trampolines);
+CLOSE_FIXED_SECTION(virt_vectors);
+CLOSE_FIXED_SECTION(virt_trampolines);
+
+USE_TEXT_SECTION()
+
 /*
  * Hash table stuff
  */
@@ -1625,3 +1537,39 @@
 1:	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	kernel_bad_stack
 	b	1b
+
+/*
+ * Called from arch_local_irq_enable when an interrupt needs
+ * to be resent. r3 contains 0x500, 0x900, 0xa00 or 0xe80 to indicate
+ * which kind of interrupt. MSR:EE is already off. We generate a
+ * stackframe like if a real interrupt had happened.
+ *
+ * Note: While MSR:EE is off, we need to make sure that _MSR
+ * in the generated frame has EE set to 1 or the exception
+ * handler will not properly re-enable them.
+ */
+_GLOBAL(__replay_interrupt)
+	/* We are going to jump to the exception common code which
+	 * will retrieve various register values from the PACA which
+	 * we don't give a damn about, so we don't bother storing them.
+	 */
+	mfmsr	r12
+	mflr	r11
+	mfcr	r9
+	ori	r12,r12,MSR_EE
+	cmpwi	r3,0x900
+	beq	decrementer_common
+	cmpwi	r3,0x500
+	beq	hardware_interrupt_common
+BEGIN_FTR_SECTION
+	cmpwi	r3,0xe80
+	beq	h_doorbell_common
+	cmpwi	r3,0xea0
+	beq	h_virt_irq_common
+	cmpwi	r3,0xe60
+	beq	hmi_exception_common
+FTR_SECTION_ELSE
+	cmpwi	r3,0xa00
+	beq	doorbell_super_common
+ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE)
+	blr
diff --git a/arch/powerpc/kernel/fadump.c b/arch/powerpc/kernel/fadump.c
index eeb80de..8f0c7c5 100644
--- a/arch/powerpc/kernel/fadump.c
+++ b/arch/powerpc/kernel/fadump.c
@@ -783,7 +783,11 @@
 	elf->e_entry = 0;
 	elf->e_phoff = sizeof(struct elfhdr);
 	elf->e_shoff = 0;
-	elf->e_flags = ELF_CORE_EFLAGS;
+#if defined(_CALL_ELF)
+	elf->e_flags = _CALL_ELF;
+#else
+	elf->e_flags = 0;
+#endif
 	elf->e_ehsize = sizeof(struct elfhdr);
 	elf->e_phentsize = sizeof(struct elf_phdr);
 	elf->e_phnum = 0;
@@ -1109,7 +1113,9 @@
 		 * Take away the '/proc/vmcore'. We are releasing the dump
 		 * memory, hence it will not be valid anymore.
 		 */
+#ifdef CONFIG_PROC_VMCORE
 		vmcore_cleanup();
+#endif
 		fadump_invalidate_release_mem();
 
 	} else
diff --git a/arch/powerpc/kernel/fpu.S b/arch/powerpc/kernel/fpu.S
index 15da2b5..08d14b0 100644
--- a/arch/powerpc/kernel/fpu.S
+++ b/arch/powerpc/kernel/fpu.S
@@ -50,32 +50,6 @@
 #define REST_32FPVSRS(n,c,base) __REST_32FPVSRS(n,__REG_##c,__REG_##base)
 #define SAVE_32FPVSRS(n,c,base) __SAVE_32FPVSRS(n,__REG_##c,__REG_##base)
 
-#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
-/* void do_load_up_transact_fpu(struct thread_struct *thread)
- *
- * This is similar to load_up_fpu but for the transactional version of the FP
- * register set.  It doesn't mess with the task MSR or valid flags.
- * Furthermore, we don't do lazy FP with TM currently.
- */
-_GLOBAL(do_load_up_transact_fpu)
-	mfmsr	r6
-	ori	r5,r6,MSR_FP
-#ifdef CONFIG_VSX
-BEGIN_FTR_SECTION
-	oris	r5,r5,MSR_VSX@h
-END_FTR_SECTION_IFSET(CPU_FTR_VSX)
-#endif
-	SYNC
-	MTMSRD(r5)
-
-	addi	r7,r3,THREAD_TRANSACT_FPSTATE
-	lfd	fr0,FPSTATE_FPSCR(r7)
-	MTFSF_L(fr0)
-	REST_32FPVSRS(0, R4, R7)
-
-	blr
-#endif /* CONFIG_PPC_TRANSACTIONAL_MEM */
-
 /*
  * Load state from memory into FP registers including FPSCR.
  * Assumes the caller has enabled FP in the MSR.
diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S
index dc0488b..a3f821e 100644
--- a/arch/powerpc/kernel/head_32.S
+++ b/arch/powerpc/kernel/head_32.S
@@ -266,7 +266,6 @@
 
 
 #define EXCEPTION_PROLOG_2	\
-	CLR_TOP32(r11);		\
 	stw	r10,_CCR(r11);		/* save registers */ \
 	stw	r12,GPR12(r11);	\
 	stw	r9,GPR9(r11);	\
@@ -862,7 +861,6 @@
 	/* ptr to phys current thread */
 	tophys(r4,r2)
 	addi	r4,r4,THREAD	/* phys address of our thread_struct */
-	CLR_TOP32(r4)
 	mtspr	SPRN_SPRG_THREAD,r4
 	li	r3,0
 	mtspr	SPRN_SPRG_RTAS,r3	/* 0 => not in RTAS */
@@ -949,7 +947,6 @@
 	/* ptr to phys current thread */
 	tophys(r4,r2)
 	addi	r4,r4,THREAD	/* init task's THREAD */
-	CLR_TOP32(r4)
 	mtspr	SPRN_SPRG_THREAD,r4
 	li	r3,0
 	mtspr	SPRN_SPRG_RTAS,r3	/* 0 => not in RTAS */
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index f765b04..79da0641 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -28,6 +28,7 @@
 #include <asm/page.h>
 #include <asm/mmu.h>
 #include <asm/ppc_asm.h>
+#include <asm/head-64.h>
 #include <asm/asm-offsets.h>
 #include <asm/bug.h>
 #include <asm/cputable.h>
@@ -65,9 +66,14 @@
  *   2. The kernel is entered at __start
  */
 
-	.text
-	.globl  _stext
-_stext:
+OPEN_FIXED_SECTION(first_256B, 0x0, 0x100)
+USE_FIXED_SECTION(first_256B)
+	/*
+	 * Offsets are relative from the start of fixed section, and
+	 * first_256B starts at 0. Offsets are a bit easier to use here
+	 * than the fixed section entry macros.
+	 */
+	. = 0x0
 _GLOBAL(__start)
 	/* NOP this out unconditionally */
 BEGIN_FTR_SECTION
@@ -104,6 +110,7 @@
 	. = 0x5c
 	.globl	__run_at_load
 __run_at_load:
+DEFINE_FIXED_SYMBOL(__run_at_load)
 	.long	0x72756e30	/* "run0" -- relocate to 0 by default */
 #endif
 
@@ -133,7 +140,7 @@
 	/* Tell the master cpu we're here */
 	/* Relocation is off & we are located at an address less */
 	/* than 0x100, so only need to grab low order offset.    */
-	std	r24,__secondary_hold_acknowledge-_stext(0)
+	std	r24,(ABS_ADDR(__secondary_hold_acknowledge))(0)
 	sync
 
 	li	r26,0
@@ -141,7 +148,7 @@
 	tovirt(r26,r26)
 #endif
 	/* All secondary cpus wait here until told to start. */
-100:	ld	r12,__secondary_hold_spinloop-_stext(r26)
+100:	ld	r12,(ABS_ADDR(__secondary_hold_spinloop))(r26)
 	cmpdi	0,r12,0
 	beq	100b
 
@@ -166,12 +173,13 @@
 #else
 	BUG_OPCODE
 #endif
+CLOSE_FIXED_SECTION(first_256B)
 
 /* This value is used to mark exception frames on the stack. */
 	.section ".toc","aw"
 exception_marker:
 	.tc	ID_72656773_68657265[TC],0x7265677368657265
-	.text
+	.previous
 
 /*
  * On server, we include the exception vectors code here as it
@@ -180,8 +188,12 @@
  */
 #ifdef CONFIG_PPC_BOOK3S
 #include "exceptions-64s.S"
+#else
+OPEN_TEXT_SECTION(0x100)
 #endif
 
+USE_TEXT_SECTION()
+
 #ifdef CONFIG_PPC_BOOK3E
 /*
  * The booting_thread_hwid holds the thread id we want to boot in cpu
@@ -558,7 +570,7 @@
 #if defined(CONFIG_PPC_BOOK3E)
 	tovirt(r26,r26)		/* on booke, we already run at PAGE_OFFSET */
 #endif
-	lwz	r7,__run_at_load-_stext(r26)
+	lwz	r7,(FIXED_SYMBOL_ABS_ADDR(__run_at_load))(r26)
 #if defined(CONFIG_PPC_BOOK3E)
 	tophys(r26,r26)
 #endif
@@ -601,7 +613,7 @@
 #if defined(CONFIG_PPC_BOOK3E)
 	tovirt(r26,r26)		/* on booke, we already run at PAGE_OFFSET */
 #endif
-	lwz	r7,__run_at_load-_stext(r26)
+	lwz	r7,(FIXED_SYMBOL_ABS_ADDR(__run_at_load))(r26)
 	cmplwi	cr0,r7,1
 	bne	3f
 
@@ -611,28 +623,35 @@
 	sub	r5,r5,r11
 #else
 	/* just copy interrupts */
-	LOAD_REG_IMMEDIATE(r5, __end_interrupts - _stext)
+	LOAD_REG_IMMEDIATE(r5, FIXED_SYMBOL_ABS_ADDR(__end_interrupts))
 #endif
 	b	5f
 3:
 #endif
-	lis	r5,(copy_to_here - _stext)@ha
-	addi	r5,r5,(copy_to_here - _stext)@l /* # bytes of memory to copy */
+	/* # bytes of memory to copy */
+	lis	r5,(ABS_ADDR(copy_to_here))@ha
+	addi	r5,r5,(ABS_ADDR(copy_to_here))@l
 
 	bl	copy_and_flush		/* copy the first n bytes	 */
 					/* this includes the code being	 */
 					/* executed here.		 */
-	addis	r8,r3,(4f - _stext)@ha	/* Jump to the copy of this code */
-	addi	r12,r8,(4f - _stext)@l	/* that we just made */
+	/* Jump to the copy of this code that we just made */
+	addis	r8,r3,(ABS_ADDR(4f))@ha
+	addi	r12,r8,(ABS_ADDR(4f))@l
 	mtctr	r12
 	bctr
 
 .balign 8
-p_end:	.llong	_end - _stext
+p_end: .llong _end - copy_to_here
 
-4:	/* Now copy the rest of the kernel up to _end */
-	addis	r5,r26,(p_end - _stext)@ha
-	ld	r5,(p_end - _stext)@l(r5)	/* get _end */
+4:
+	/*
+	 * Now copy the rest of the kernel up to _end, add
+	 * _end - copy_to_here to the copy limit and run again.
+	 */
+	addis   r8,r26,(ABS_ADDR(p_end))@ha
+	ld      r8,(ABS_ADDR(p_end))@l(r8)
+	add	r5,r5,r8
 5:	bl	copy_and_flush		/* copy the rest */
 
 9:	b	start_here_multiplatform
diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S
index 43ddaae..3a185c5 100644
--- a/arch/powerpc/kernel/head_8xx.S
+++ b/arch/powerpc/kernel/head_8xx.S
@@ -151,7 +151,6 @@
 
 
 #define EXCEPTION_PROLOG_2	\
-	CLR_TOP32(r11);		\
 	stw	r10,_CCR(r11);		/* save registers */ \
 	stw	r12,GPR12(r11);	\
 	stw	r9,GPR9(r11);	\
diff --git a/arch/powerpc/kernel/hw_breakpoint.c b/arch/powerpc/kernel/hw_breakpoint.c
index aec9a1b..9781c69 100644
--- a/arch/powerpc/kernel/hw_breakpoint.c
+++ b/arch/powerpc/kernel/hw_breakpoint.c
@@ -206,7 +206,7 @@
 /*
  * Handle debug exception notifications.
  */
-int __kprobes hw_breakpoint_handler(struct die_args *args)
+int hw_breakpoint_handler(struct die_args *args)
 {
 	int rc = NOTIFY_STOP;
 	struct perf_event *bp;
@@ -290,11 +290,12 @@
 	rcu_read_unlock();
 	return rc;
 }
+NOKPROBE_SYMBOL(hw_breakpoint_handler);
 
 /*
  * Handle single-step exceptions following a DABR hit.
  */
-static int __kprobes single_step_dabr_instruction(struct die_args *args)
+static int single_step_dabr_instruction(struct die_args *args)
 {
 	struct pt_regs *regs = args->regs;
 	struct perf_event *bp = NULL;
@@ -329,11 +330,12 @@
 
 	return NOTIFY_STOP;
 }
+NOKPROBE_SYMBOL(single_step_dabr_instruction);
 
 /*
  * Handle debug exception notifications.
  */
-int __kprobes hw_breakpoint_exceptions_notify(
+int hw_breakpoint_exceptions_notify(
 		struct notifier_block *unused, unsigned long val, void *data)
 {
 	int ret = NOTIFY_DONE;
@@ -349,6 +351,7 @@
 
 	return ret;
 }
+NOKPROBE_SYMBOL(hw_breakpoint_exceptions_notify);
 
 /*
  * Release the user breakpoints used by ptrace
diff --git a/arch/powerpc/kernel/ibmebus.c b/arch/powerpc/kernel/ibmebus.c
index c1ca928..6ca9a2f 100644
--- a/arch/powerpc/kernel/ibmebus.c
+++ b/arch/powerpc/kernel/ibmebus.c
@@ -227,7 +227,7 @@
 {
 	unsigned int irq = irq_create_mapping(NULL, ist);
 
-	if (irq == NO_IRQ)
+	if (!irq)
 		return -EINVAL;
 
 	return request_irq(irq, handler, irq_flags, devname, dev_id);
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index 08887cf..3c05c31 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -67,6 +67,7 @@
 #include <asm/smp.h>
 #include <asm/debug.h>
 #include <asm/livepatch.h>
+#include <asm/asm-prototypes.h>
 
 #ifdef CONFIG_PPC64
 #include <asm/paca.h>
@@ -156,6 +157,15 @@
 	}
 
 	/*
+	 * Check if an hypervisor Maintenance interrupt happened.
+	 * This is a higher priority interrupt than the others, so
+	 * replay it first.
+	 */
+	local_paca->irq_happened &= ~PACA_IRQ_HMI;
+	if (happened & PACA_IRQ_HMI)
+		return 0xe60;
+
+	/*
 	 * We may have missed a decrementer interrupt. We check the
 	 * decrementer itself rather than the paca irq_happened field
 	 * in case we also had a rollover while hard disabled
@@ -190,11 +200,6 @@
 	}
 #endif /* CONFIG_PPC_BOOK3E */
 
-	/* Check if an hypervisor Maintenance interrupt happened */
-	local_paca->irq_happened &= ~PACA_IRQ_HMI;
-	if (happened & PACA_IRQ_HMI)
-		return 0xe60;
-
 	/* There should be nothing left ! */
 	BUG_ON(local_paca->irq_happened != 0);
 
@@ -514,7 +519,7 @@
 	may_hard_irq_enable();
 
 	/* And finally process it */
-	if (unlikely(irq == NO_IRQ))
+	if (unlikely(!irq))
 		__this_cpu_inc(irq_stat.spurious_irqs);
 	else
 		generic_handle_irq(irq);
diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c
index 7b750c4..bc525ea 100644
--- a/arch/powerpc/kernel/legacy_serial.c
+++ b/arch/powerpc/kernel/legacy_serial.c
@@ -193,10 +193,10 @@
 	 */
 	if (tsi && !strcmp(tsi->type, "tsi-bridge"))
 		return add_legacy_port(np, -1, UPIO_TSI, addr, addr,
-				       NO_IRQ, legacy_port_flags, 0);
+				       0, legacy_port_flags, 0);
 	else
 		return add_legacy_port(np, -1, UPIO_MEM, addr, addr,
-				       NO_IRQ, legacy_port_flags, 0);
+				       0, legacy_port_flags, 0);
 }
 
 static int __init add_legacy_isa_port(struct device_node *np,
@@ -242,7 +242,7 @@
 
 	/* Add port, irq will be dealt with later */
 	return add_legacy_port(np, index, UPIO_PORT, be32_to_cpu(reg[1]),
-			       taddr, NO_IRQ, legacy_port_flags, 0);
+			       taddr, 0, legacy_port_flags, 0);
 
 }
 
@@ -314,7 +314,7 @@
 	/* Add port, irq will be dealt with later. We passed a translated
 	 * IO port value. It will be fixed up later along with the irq
 	 */
-	return add_legacy_port(np, index, iotype, base, addr, NO_IRQ,
+	return add_legacy_port(np, index, iotype, base, addr, 0,
 			       legacy_port_flags, np != pci_dev);
 }
 #endif
@@ -462,14 +462,14 @@
 	DBG("fixup_port_irq(%d)\n", index);
 
 	virq = irq_of_parse_and_map(np, 0);
-	if (virq == NO_IRQ && legacy_serial_infos[index].irq_check_parent) {
+	if (!virq && legacy_serial_infos[index].irq_check_parent) {
 		np = of_get_parent(np);
 		if (np == NULL)
 			return;
 		virq = irq_of_parse_and_map(np, 0);
 		of_node_put(np);
 	}
-	if (virq == NO_IRQ)
+	if (!virq)
 		return;
 
 	port->irq = virq;
@@ -543,7 +543,7 @@
 		struct plat_serial8250_port *port = &legacy_serial_ports[i];
 		struct device_node *np = legacy_serial_infos[i].np;
 
-		if (port->irq == NO_IRQ)
+		if (!port->irq)
 			fixup_port_irq(i, np, port);
 		if (port->iotype == UPIO_PORT)
 			fixup_port_pio(i, np, port);
diff --git a/arch/powerpc/kernel/machine_kexec_64.c b/arch/powerpc/kernel/machine_kexec_64.c
index 4c780a3..a205fa3 100644
--- a/arch/powerpc/kernel/machine_kexec_64.c
+++ b/arch/powerpc/kernel/machine_kexec_64.c
@@ -23,6 +23,7 @@
 #include <asm/current.h>
 #include <asm/machdep.h>
 #include <asm/cacheflush.h>
+#include <asm/firmware.h>
 #include <asm/paca.h>
 #include <asm/mmu.h>
 #include <asm/sections.h>	/* _end */
@@ -31,21 +32,6 @@
 #include <asm/hw_breakpoint.h>
 #include <asm/asm-prototypes.h>
 
-#ifdef CONFIG_PPC_BOOK3E
-int default_machine_kexec_prepare(struct kimage *image)
-{
-	int i;
-	/*
-	 * Since we use the kernel fault handlers and paging code to
-	 * handle the virtual mode, we must make sure no destination
-	 * overlaps kernel static data or bss.
-	 */
-	for (i = 0; i < image->nr_segments; i++)
-		if (image->segment[i].mem < __pa(_end))
-			return -ETXTBSY;
-	return 0;
-}
-#else
 int default_machine_kexec_prepare(struct kimage *image)
 {
 	int i;
@@ -55,9 +41,6 @@
 	const unsigned long *basep;
 	const unsigned int *sizep;
 
-	if (!mmu_hash_ops.hpte_clear_all)
-		return -ENOENT;
-
 	/*
 	 * Since we use the kernel fault handlers and paging code to
 	 * handle the virtual mode, we must make sure no destination
@@ -67,31 +50,6 @@
 		if (image->segment[i].mem < __pa(_end))
 			return -ETXTBSY;
 
-	/*
-	 * For non-LPAR, we absolutely can not overwrite the mmu hash
-	 * table, since we are still using the bolted entries in it to
-	 * do the copy.  Check that here.
-	 *
-	 * It is safe if the end is below the start of the blocked
-	 * region (end <= low), or if the beginning is after the
-	 * end of the blocked region (begin >= high).  Use the
-	 * boolean identity !(a || b)  === (!a && !b).
-	 */
-#ifdef CONFIG_PPC_STD_MMU_64
-	if (htab_address) {
-		low = __pa(htab_address);
-		high = low + htab_size_bytes;
-
-		for (i = 0; i < image->nr_segments; i++) {
-			begin = image->segment[i].mem;
-			end = begin + image->segment[i].memsz;
-
-			if ((begin < high) && (end > low))
-				return -ETXTBSY;
-		}
-	}
-#endif /* CONFIG_PPC_STD_MMU_64 */
-
 	/* We also should not overwrite the tce tables */
 	for_each_node_by_type(node, "pci") {
 		basep = of_get_property(node, "linux,tce-base", NULL);
@@ -113,7 +71,6 @@
 
 	return 0;
 }
-#endif /* !CONFIG_PPC_BOOK3E */
 
 static void copy_segments(unsigned long ind)
 {
@@ -332,11 +289,14 @@
 /* Our assembly helper, in misc_64.S */
 extern void kexec_sequence(void *newstack, unsigned long start,
 			   void *image, void *control,
-			   void (*clear_all)(void)) __noreturn;
+			   void (*clear_all)(void),
+			   bool copy_with_mmu_off) __noreturn;
 
 /* too late to fail here */
 void default_machine_kexec(struct kimage *image)
 {
+	bool copy_with_mmu_off;
+
 	/* prepare control code if any */
 
 	/*
@@ -374,18 +334,29 @@
 	/* XXX: If anyone does 'dynamic lppacas' this will also need to be
 	 * switched to a static version!
 	 */
+	/*
+	 * On Book3S, the copy must happen with the MMU off if we are either
+	 * using Radix page tables or we are not in an LPAR since we can
+	 * overwrite the page tables while copying.
+	 *
+	 * In an LPAR, we keep the MMU on otherwise we can't access beyond
+	 * the RMA. On BookE there is no real MMU off mode, so we have to
+	 * keep it enabled as well (but then we have bolted TLB entries).
+	 */
+#ifdef CONFIG_PPC_BOOK3E
+	copy_with_mmu_off = false;
+#else
+	copy_with_mmu_off = radix_enabled() ||
+		!(firmware_has_feature(FW_FEATURE_LPAR) ||
+		  firmware_has_feature(FW_FEATURE_PS3_LV1));
+#endif
 
 	/* Some things are best done in assembly.  Finding globals with
 	 * a toc is easier in C, so pass in what we can.
 	 */
 	kexec_sequence(&kexec_stack, image->start, image,
-			page_address(image->control_code_page),
-#ifdef CONFIG_PPC_STD_MMU
-			mmu_hash_ops.hpte_clear_all
-#else
-			NULL
-#endif
-	);
+		       page_address(image->control_code_page),
+		       mmu_cleanup_all, copy_with_mmu_off);
 	/* NOTREACHED */
 }
 
diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S
index d9c912b..03756ff 100644
--- a/arch/powerpc/kernel/misc_32.S
+++ b/arch/powerpc/kernel/misc_32.S
@@ -328,7 +328,7 @@
  *
  * flush_icache_range(unsigned long start, unsigned long stop)
  */
-_KPROBE(flush_icache_range)
+_GLOBAL(flush_icache_range)
 BEGIN_FTR_SECTION
 	PURGE_PREFETCHED_INS
 	blr				/* for 601, do nothing */
@@ -358,6 +358,8 @@
 	sync				/* additional sync needed on g4 */
 	isync
 	blr
+_ASM_NOKPROBE_SYMBOL(flush_icache_range)
+
 /*
  * Flush a particular page from the data cache to RAM.
  * Note: this is necessary because the instruction cache does *not*
diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S
index cb19515..9f0bed2 100644
--- a/arch/powerpc/kernel/misc_64.S
+++ b/arch/powerpc/kernel/misc_64.S
@@ -66,7 +66,7 @@
  *   flush all bytes from start through stop-1 inclusive
  */
 
-_KPROBE(flush_icache_range)
+_GLOBAL(flush_icache_range)
 BEGIN_FTR_SECTION
 	PURGE_PREFETCHED_INS
 	blr
@@ -109,7 +109,8 @@
 	bdnz	2b
 	isync
 	blr
-	.previous .text
+_ASM_NOKPROBE_SYMBOL(flush_icache_range)
+
 /*
  * Like above, but only do the D-cache.
  *
@@ -591,7 +592,8 @@
 #endif
 
 /*
- * kexec_sequence(newstack, start, image, control, clear_all())
+ * kexec_sequence(newstack, start, image, control, clear_all(),
+	          copy_with_mmu_off)
  *
  * does the grungy work with stack switching and real mode switches
  * also does simple calls to other code
@@ -627,7 +629,7 @@
 	mr	r29,r5			/* image (virt) */
 	mr	r28,r6			/* control, unused */
 	mr	r27,r7			/* clear_all() fn desc */
-	mr	r26,r8			/* spare */
+	mr	r26,r8			/* copy_with_mmu_off */
 	lhz	r25,PACAHWCPUID(r13)	/* get our phys cpu from paca */
 
 	/* disable interrupts, we are overwriting kernel data next */
@@ -639,15 +641,24 @@
 	mtmsrd	r3,1
 #endif
 
+	/* We need to turn the MMU off unless we are in hash mode
+	 * under a hypervisor
+	 */
+	cmpdi	r26,0
+	beq	1f
+	bl	real_mode
+1:
 	/* copy dest pages, flush whole dest image */
 	mr	r3,r29
 	bl	kexec_copy_flush	/* (image) */
 
-	/* turn off mmu */
+	/* turn off mmu now if not done earlier */
+	cmpdi	r26,0
+	bne	1f
 	bl	real_mode
 
 	/* copy  0x100 bytes starting at start to 0 */
-	li	r3,0
+1:	li	r3,0
 	mr	r4,r30		/* start, aka phys mem offset */
 	li	r5,0x100
 	li	r6,0
@@ -659,7 +670,9 @@
 	li	r6,1
 	stw	r6,kexec_flag-1b(5)
 
-#ifndef CONFIG_PPC_BOOK3E
+	cmpdi	r27,0
+	beq	1f
+
 	/* clear out hardware hash page table and tlb */
 #ifdef PPC64_ELF_ABI_v1
 	ld	r12,0(r27)		/* deref function descriptor */
@@ -668,7 +681,6 @@
 #endif
 	mtctr	r12
 	bctrl				/* mmu_hash_ops.hpte_clear_all(void); */
-#endif /* !CONFIG_PPC_BOOK3E */
 
 /*
  *   kexec image calling is:
@@ -695,7 +707,7 @@
  *    are the boot cpu ?????
  *    other device tree differences (prop sizes, va vs pa, etc)...
  */
-	mr	r3,r25	# my phys cpu
+1:	mr	r3,r25	# my phys cpu
 	mr	r4,r30	# start, aka phys mem offset
 	mtlr	4
 	li	r5,0
diff --git a/arch/powerpc/kernel/module.c b/arch/powerpc/kernel/module.c
index d1f1b35..30b89d5 100644
--- a/arch/powerpc/kernel/module.c
+++ b/arch/powerpc/kernel/module.c
@@ -27,7 +27,7 @@
 #include <linux/sort.h>
 #include <asm/setup.h>
 
-LIST_HEAD(module_bug_list);
+static LIST_HEAD(module_bug_list);
 
 static const Elf_Shdr *find_section(const Elf_Ehdr *hdr,
 				    const Elf_Shdr *sechdrs,
diff --git a/arch/powerpc/kernel/nvram_64.c b/arch/powerpc/kernel/nvram_64.c
index 64174bf..34d2c59 100644
--- a/arch/powerpc/kernel/nvram_64.c
+++ b/arch/powerpc/kernel/nvram_64.c
@@ -542,9 +542,9 @@
 			time->tv_nsec = 0;
 		}
 		*buf = kmemdup(buff + hdr_size, length, GFP_KERNEL);
+		kfree(buff);
 		if (*buf == NULL)
 			return -ENOMEM;
-		kfree(buff);
 
 		*ecc_notice_size = 0;
 		if (err_type == ERR_TYPE_KERNEL_PANIC_GZ)
@@ -851,7 +851,7 @@
 	}
 }
 
-const struct file_operations nvram_fops = {
+static const struct file_operations nvram_fops = {
 	.owner		= THIS_MODULE,
 	.llseek		= dev_nvram_llseek,
 	.read		= dev_nvram_read,
@@ -956,7 +956,7 @@
 
 		/* Make partition a free partition */
 		part->header.signature = NVRAM_SIG_FREE;
-		strncpy(part->header.name, "wwwwwwwwwwww", 12);
+		memset(part->header.name, 'w', 12);
 		part->header.checksum = nvram_checksum(&part->header);
 		rc = nvram_write_header(part);
 		if (rc <= 0) {
@@ -974,8 +974,8 @@
 		}
 		if (prev) {
 			prev->header.length += part->header.length;
-			prev->header.checksum = nvram_checksum(&part->header);
-			rc = nvram_write_header(part);
+			prev->header.checksum = nvram_checksum(&prev->header);
+			rc = nvram_write_header(prev);
 			if (rc <= 0) {
 				printk(KERN_ERR "nvram_remove_partition: nvram_write failed (%d)\n", rc);
 				return rc;
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index e589080..95d3769 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -360,7 +360,7 @@
 			 line, pin);
 
 		virq = irq_create_mapping(NULL, line);
-		if (virq != NO_IRQ)
+		if (virq)
 			irq_set_irq_type(virq, IRQ_TYPE_LEVEL_LOW);
 	} else {
 		pr_debug(" Got one, spec %d cells (0x%08x 0x%08x...) on %s\n",
@@ -369,7 +369,8 @@
 
 		virq = irq_create_of_mapping(&oirq);
 	}
-	if(virq == NO_IRQ) {
+
+	if (!virq) {
 		pr_debug(" Failed to map !\n");
 		return -1;
 	}
diff --git a/arch/powerpc/kernel/pci_of_scan.c b/arch/powerpc/kernel/pci_of_scan.c
index 526ac67..ea3d981 100644
--- a/arch/powerpc/kernel/pci_of_scan.c
+++ b/arch/powerpc/kernel/pci_of_scan.c
@@ -178,7 +178,7 @@
 		dev->hdr_type = PCI_HEADER_TYPE_NORMAL;
 		dev->rom_base_reg = PCI_ROM_ADDRESS;
 		/* Maybe do a default OF mapping here */
-		dev->irq = NO_IRQ;
+		dev->irq = 0;
 	}
 
 	of_pci_parse_addrs(node, dev);
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 9ee2623..9e7c10f 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -59,6 +59,7 @@
 #include <asm/exec.h>
 #include <asm/livepatch.h>
 #include <asm/cpu_has_feature.h>
+#include <asm/asm-prototypes.h>
 
 #include <linux/kprobes.h>
 #include <linux/kdebug.h>
@@ -88,7 +89,13 @@
 		set_thread_flag(TIF_RESTORE_TM);
 	}
 }
+
+static inline bool msr_tm_active(unsigned long msr)
+{
+	return MSR_TM_ACTIVE(msr);
+}
 #else
+static inline bool msr_tm_active(unsigned long msr) { return false; }
 static inline void check_if_tm_restore_required(struct task_struct *tsk) { }
 #endif /* CONFIG_PPC_TRANSACTIONAL_MEM */
 
@@ -104,7 +111,7 @@
 }
 early_param("ppc_strict_facility_enable", enable_strict_msr_control);
 
-void msr_check_and_set(unsigned long bits)
+unsigned long msr_check_and_set(unsigned long bits)
 {
 	unsigned long oldmsr = mfmsr();
 	unsigned long newmsr;
@@ -118,6 +125,8 @@
 
 	if (oldmsr != newmsr)
 		mtmsr_isync(newmsr);
+
+	return newmsr;
 }
 
 void __msr_check_and_clear(unsigned long bits)
@@ -196,19 +205,30 @@
 
 void enable_kernel_fp(void)
 {
+	unsigned long cpumsr;
+
 	WARN_ON(preemptible());
 
-	msr_check_and_set(MSR_FP);
+	cpumsr = msr_check_and_set(MSR_FP);
 
 	if (current->thread.regs && (current->thread.regs->msr & MSR_FP)) {
 		check_if_tm_restore_required(current);
+		/*
+		 * If a thread has already been reclaimed then the
+		 * checkpointed registers are on the CPU but have definitely
+		 * been saved by the reclaim code. Don't need to and *cannot*
+		 * giveup as this would save  to the 'live' structure not the
+		 * checkpointed structure.
+		 */
+		if(!msr_tm_active(cpumsr) && msr_tm_active(current->thread.regs->msr))
+			return;
 		__giveup_fpu(current);
 	}
 }
 EXPORT_SYMBOL(enable_kernel_fp);
 
 static int restore_fp(struct task_struct *tsk) {
-	if (tsk->thread.load_fp) {
+	if (tsk->thread.load_fp || msr_tm_active(tsk->thread.regs->msr)) {
 		load_fp_state(&current->thread.fp_state);
 		current->thread.load_fp++;
 		return 1;
@@ -248,12 +268,23 @@
 
 void enable_kernel_altivec(void)
 {
+	unsigned long cpumsr;
+
 	WARN_ON(preemptible());
 
-	msr_check_and_set(MSR_VEC);
+	cpumsr = msr_check_and_set(MSR_VEC);
 
 	if (current->thread.regs && (current->thread.regs->msr & MSR_VEC)) {
 		check_if_tm_restore_required(current);
+		/*
+		 * If a thread has already been reclaimed then the
+		 * checkpointed registers are on the CPU but have definitely
+		 * been saved by the reclaim code. Don't need to and *cannot*
+		 * giveup as this would save  to the 'live' structure not the
+		 * checkpointed structure.
+		 */
+		if(!msr_tm_active(cpumsr) && msr_tm_active(current->thread.regs->msr))
+			return;
 		__giveup_altivec(current);
 	}
 }
@@ -278,7 +309,8 @@
 
 static int restore_altivec(struct task_struct *tsk)
 {
-	if (cpu_has_feature(CPU_FTR_ALTIVEC) && tsk->thread.load_vec) {
+	if (cpu_has_feature(CPU_FTR_ALTIVEC) &&
+		(tsk->thread.load_vec || msr_tm_active(tsk->thread.regs->msr))) {
 		load_vr_state(&tsk->thread.vr_state);
 		tsk->thread.used_vr = 1;
 		tsk->thread.load_vec++;
@@ -321,12 +353,23 @@
 
 void enable_kernel_vsx(void)
 {
+	unsigned long cpumsr;
+
 	WARN_ON(preemptible());
 
-	msr_check_and_set(MSR_FP|MSR_VEC|MSR_VSX);
+	cpumsr = msr_check_and_set(MSR_FP|MSR_VEC|MSR_VSX);
 
 	if (current->thread.regs && (current->thread.regs->msr & MSR_VSX)) {
 		check_if_tm_restore_required(current);
+		/*
+		 * If a thread has already been reclaimed then the
+		 * checkpointed registers are on the CPU but have definitely
+		 * been saved by the reclaim code. Don't need to and *cannot*
+		 * giveup as this would save  to the 'live' structure not the
+		 * checkpointed structure.
+		 */
+		if(!msr_tm_active(cpumsr) && msr_tm_active(current->thread.regs->msr))
+			return;
 		if (current->thread.regs->msr & MSR_FP)
 			__giveup_fpu(current);
 		if (current->thread.regs->msr & MSR_VEC)
@@ -438,6 +481,7 @@
 		return;
 
 	msr_check_and_set(msr_all_available);
+	check_if_tm_restore_required(tsk);
 
 #ifdef CONFIG_PPC_FPU
 	if (usermsr & MSR_FP)
@@ -464,7 +508,8 @@
 {
 	unsigned long msr;
 
-	if (!current->thread.load_fp && !loadvec(current->thread))
+	if (!msr_tm_active(regs->msr) &&
+		!current->thread.load_fp && !loadvec(current->thread))
 		return;
 
 	msr = regs->msr;
@@ -767,29 +812,15 @@
 }
 
 #ifdef CONFIG_PPC_TRANSACTIONAL_MEM
+
+static inline bool tm_enabled(struct task_struct *tsk)
+{
+	return tsk && tsk->thread.regs && (tsk->thread.regs->msr & MSR_TM);
+}
+
 static void tm_reclaim_thread(struct thread_struct *thr,
 			      struct thread_info *ti, uint8_t cause)
 {
-	unsigned long msr_diff = 0;
-
-	/*
-	 * If FP/VSX registers have been already saved to the
-	 * thread_struct, move them to the transact_fp array.
-	 * We clear the TIF_RESTORE_TM bit since after the reclaim
-	 * the thread will no longer be transactional.
-	 */
-	if (test_ti_thread_flag(ti, TIF_RESTORE_TM)) {
-		msr_diff = thr->ckpt_regs.msr & ~thr->regs->msr;
-		if (msr_diff & MSR_FP)
-			memcpy(&thr->transact_fp, &thr->fp_state,
-			       sizeof(struct thread_fp_state));
-		if (msr_diff & MSR_VEC)
-			memcpy(&thr->transact_vr, &thr->vr_state,
-			       sizeof(struct thread_vr_state));
-		clear_ti_thread_flag(ti, TIF_RESTORE_TM);
-		msr_diff &= MSR_FP | MSR_VEC | MSR_VSX | MSR_FE0 | MSR_FE1;
-	}
-
 	/*
 	 * Use the current MSR TM suspended bit to track if we have
 	 * checkpointed state outstanding.
@@ -808,15 +839,9 @@
 	if (!MSR_TM_SUSPENDED(mfmsr()))
 		return;
 
-	tm_reclaim(thr, thr->regs->msr, cause);
+	giveup_all(container_of(thr, struct task_struct, thread));
 
-	/* Having done the reclaim, we now have the checkpointed
-	 * FP/VSX values in the registers.  These might be valid
-	 * even if we have previously called enable_kernel_fp() or
-	 * flush_fp_to_thread(), so update thr->regs->msr to
-	 * indicate their current validity.
-	 */
-	thr->regs->msr |= msr_diff;
+	tm_reclaim(thr, thr->ckpt_regs.msr, cause);
 }
 
 void tm_reclaim_current(uint8_t cause)
@@ -832,8 +857,8 @@
 	 *
 	 * In switching we need to maintain a 2nd register state as
 	 * oldtask->thread.ckpt_regs.  We tm_reclaim(oldproc); this saves the
-	 * checkpointed (tbegin) state in ckpt_regs and saves the transactional
-	 * (current) FPRs into oldtask->thread.transact_fpr[].
+	 * checkpointed (tbegin) state in ckpt_regs, ckfp_state and
+	 * ckvr_state
 	 *
 	 * We also context switch (save) TFHAR/TEXASR/TFIAR in here.
 	 */
@@ -845,14 +870,6 @@
 	if (!MSR_TM_ACTIVE(thr->regs->msr))
 		goto out_and_saveregs;
 
-	/* Stash the original thread MSR, as giveup_fpu et al will
-	 * modify it.  We hold onto it to see whether the task used
-	 * FP & vector regs.  If the TIF_RESTORE_TM flag is set,
-	 * ckpt_regs.msr is already set.
-	 */
-	if (!test_ti_thread_flag(task_thread_info(tsk), TIF_RESTORE_TM))
-		thr->ckpt_regs.msr = thr->regs->msr;
-
 	TM_DEBUG("--- tm_reclaim on pid %d (NIP=%lx, "
 		 "ccr=%lx, msr=%lx, trap=%lx)\n",
 		 tsk->pid, thr->regs->nip,
@@ -881,6 +898,9 @@
 {
 	unsigned long flags;
 
+	if (!(thread->regs->msr & MSR_TM))
+		return;
+
 	/* We really can't be interrupted here as the TEXASR registers can't
 	 * change and later in the trecheckpoint code, we have a userspace R1.
 	 * So let's hard disable over this region.
@@ -910,10 +930,10 @@
 	 * If the task was using FP, we non-lazily reload both the original and
 	 * the speculative FP register states.  This is because the kernel
 	 * doesn't see if/when a TM rollback occurs, so if we take an FP
-	 * unavoidable later, we are unable to determine which set of FP regs
+	 * unavailable later, we are unable to determine which set of FP regs
 	 * need to be restored.
 	 */
-	if (!new->thread.regs)
+	if (!tm_enabled(new))
 		return;
 
 	if (!MSR_TM_ACTIVE(new->thread.regs->msr)){
@@ -926,35 +946,35 @@
 		 "(new->msr 0x%lx, new->origmsr 0x%lx)\n",
 		 new->pid, new->thread.regs->msr, msr);
 
-	/* This loads the checkpointed FP/VEC state, if used */
 	tm_recheckpoint(&new->thread, msr);
 
-	/* This loads the speculative FP/VEC state, if used */
-	if (msr & MSR_FP) {
-		do_load_up_transact_fpu(&new->thread);
-		new->thread.regs->msr |=
-			(MSR_FP | new->thread.fpexc_mode);
-	}
-#ifdef CONFIG_ALTIVEC
-	if (msr & MSR_VEC) {
-		do_load_up_transact_altivec(&new->thread);
-		new->thread.regs->msr |= MSR_VEC;
-	}
-#endif
-	/* We may as well turn on VSX too since all the state is restored now */
-	if (msr & MSR_VSX)
-		new->thread.regs->msr |= MSR_VSX;
+	/*
+	 * The checkpointed state has been restored but the live state has
+	 * not, ensure all the math functionality is turned off to trigger
+	 * restore_math() to reload.
+	 */
+	new->thread.regs->msr &= ~(MSR_FP | MSR_VEC | MSR_VSX);
 
 	TM_DEBUG("*** tm_recheckpoint of pid %d complete "
 		 "(kernel msr 0x%lx)\n",
 		 new->pid, mfmsr());
 }
 
-static inline void __switch_to_tm(struct task_struct *prev)
+static inline void __switch_to_tm(struct task_struct *prev,
+		struct task_struct *new)
 {
 	if (cpu_has_feature(CPU_FTR_TM)) {
-		tm_enable();
-		tm_reclaim_task(prev);
+		if (tm_enabled(prev) || tm_enabled(new))
+			tm_enable();
+
+		if (tm_enabled(prev)) {
+			prev->thread.load_tm++;
+			tm_reclaim_task(prev);
+			if (!MSR_TM_ACTIVE(prev->thread.regs->msr) && prev->thread.load_tm == 0)
+				prev->thread.regs->msr &= ~MSR_TM;
+		}
+
+		tm_recheckpoint_new_task(new);
 	}
 }
 
@@ -976,6 +996,12 @@
 {
 	unsigned long msr_diff;
 
+	/*
+	 * This is the only moment we should clear TIF_RESTORE_TM as
+	 * it is here that ckpt_regs.msr and pt_regs.msr become the same
+	 * again, anything else could lead to an incorrect ckpt_msr being
+	 * saved and therefore incorrect signal contexts.
+	 */
 	clear_thread_flag(TIF_RESTORE_TM);
 	if (!MSR_TM_ACTIVE(regs->msr))
 		return;
@@ -983,6 +1009,13 @@
 	msr_diff = current->thread.ckpt_regs.msr & ~regs->msr;
 	msr_diff &= MSR_FP | MSR_VEC | MSR_VSX;
 
+	/* Ensure that restore_math() will restore */
+	if (msr_diff & MSR_FP)
+		current->thread.load_fp = 1;
+#ifdef CONFIG_ALIVEC
+	if (cpu_has_feature(CPU_FTR_ALTIVEC) && msr_diff & MSR_VEC)
+		current->thread.load_vec = 1;
+#endif
 	restore_math(regs);
 
 	regs->msr |= msr_diff;
@@ -990,7 +1023,7 @@
 
 #else
 #define tm_recheckpoint_new_task(new)
-#define __switch_to_tm(prev)
+#define __switch_to_tm(prev, new)
 #endif /* CONFIG_PPC_TRANSACTIONAL_MEM */
 
 static inline void save_sprs(struct thread_struct *t)
@@ -1131,11 +1164,11 @@
 	 */
 	save_sprs(&prev->thread);
 
-	__switch_to_tm(prev);
-
 	/* Save FPU, Altivec, VSX and SPE state */
 	giveup_all(prev);
 
+	__switch_to_tm(prev, new);
+
 	/*
 	 * We can't take a PMU exception inside _switch() since there is a
 	 * window where the kernel stack SLB and the kernel stack are out
@@ -1143,8 +1176,6 @@
 	 */
 	hard_irq_disable();
 
-	tm_recheckpoint_new_task(new);
-
 	/*
 	 * Call restore_sprs() before calling _switch(). If we move it after
 	 * _switch() then we miss out on calling it for new tasks. The reason
@@ -1379,9 +1410,11 @@
 	 * transitions the CPU out of TM mode.  Hence we need to call
 	 * tm_recheckpoint_new_task() (on the same task) to restore the
 	 * checkpointed state back and the TM mode.
+	 *
+	 * Can't pass dst because it isn't ready. Doesn't matter, passing
+	 * dst is only important for __switch_to()
 	 */
-	__switch_to_tm(src);
-	tm_recheckpoint_new_task(src);
+	__switch_to_tm(src, src);
 
 	*dst = *src;
 
@@ -1623,8 +1656,6 @@
 	current->thread.used_spe = 0;
 #endif /* CONFIG_SPE */
 #ifdef CONFIG_PPC_TRANSACTIONAL_MEM
-	if (cpu_has_feature(CPU_FTR_TM))
-		regs->msr |= MSR_TM;
 	current->thread.tm_tfhar = 0;
 	current->thread.tm_texasr = 0;
 	current->thread.tm_tfiar = 0;
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index d3eff99..88ac964 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -42,6 +42,7 @@
 #include <asm/sections.h>
 #include <asm/machdep.h>
 #include <asm/opal.h>
+#include <asm/asm-prototypes.h>
 
 #include <linux/linux_logo.h>
 
@@ -2643,6 +2644,86 @@
 #define fixup_device_tree_efika()
 #endif
 
+#ifdef CONFIG_PPC_PASEMI_NEMO
+/*
+ * CFE supplied on Nemo is broken in several ways, biggest
+ * problem is that it reassigns ISA interrupts to unused mpic ints.
+ * Add an interrupt-controller property for the io-bridge to use
+ * and correct the ints so we can attach them to an irq_domain
+ */
+static void __init fixup_device_tree_pasemi(void)
+{
+	u32 interrupts[2], parent, rval, val = 0;
+	char *name, *pci_name;
+	phandle iob, node;
+
+	/* Find the root pci node */
+	name = "/pxp@0,e0000000";
+	iob = call_prom("finddevice", 1, 1, ADDR(name));
+	if (!PHANDLE_VALID(iob))
+		return;
+
+	/* check if interrupt-controller node set yet */
+	if (prom_getproplen(iob, "interrupt-controller") !=PROM_ERROR)
+		return;
+
+	prom_printf("adding interrupt-controller property for SB600...\n");
+
+	prom_setprop(iob, name, "interrupt-controller", &val, 0);
+
+	pci_name = "/pxp@0,e0000000/pci@11";
+	node = call_prom("finddevice", 1, 1, ADDR(pci_name));
+	parent = ADDR(iob);
+
+	for( ; prom_next_node(&node); ) {
+		/* scan each node for one with an interrupt */
+		if (!PHANDLE_VALID(node))
+			continue;
+
+		rval = prom_getproplen(node, "interrupts");
+		if (rval == 0 || rval == PROM_ERROR)
+			continue;
+
+		prom_getprop(node, "interrupts", &interrupts, sizeof(interrupts));
+		if ((interrupts[0] < 212) || (interrupts[0] > 222))
+			continue;
+
+		/* found a node, update both interrupts and interrupt-parent */
+		if ((interrupts[0] >= 212) && (interrupts[0] <= 215))
+			interrupts[0] -= 203;
+		if ((interrupts[0] >= 216) && (interrupts[0] <= 220))
+			interrupts[0] -= 213;
+		if (interrupts[0] == 221)
+			interrupts[0] = 14;
+		if (interrupts[0] == 222)
+			interrupts[0] = 8;
+
+		prom_setprop(node, pci_name, "interrupts", interrupts,
+					sizeof(interrupts));
+		prom_setprop(node, pci_name, "interrupt-parent", &parent,
+					sizeof(parent));
+	}
+
+	/*
+	 * The io-bridge has device_type set to 'io-bridge' change it to 'isa'
+	 * so that generic isa-bridge code can add the SB600 and its on-board
+	 * peripherals.
+	 */
+	name = "/pxp@0,e0000000/io-bridge@0";
+	iob = call_prom("finddevice", 1, 1, ADDR(name));
+	if (!PHANDLE_VALID(iob))
+		return;
+
+	/* device_type is already set, just change it. */
+
+	prom_printf("Changing device_type of SB600 node...\n");
+
+	prom_setprop(iob, name, "device_type", "isa", sizeof("isa"));
+}
+#else	/* !CONFIG_PPC_PASEMI_NEMO */
+static inline void fixup_device_tree_pasemi(void) { }
+#endif
+
 static void __init fixup_device_tree(void)
 {
 	fixup_device_tree_maple();
@@ -2650,6 +2731,7 @@
 	fixup_device_tree_chrp();
 	fixup_device_tree_pmac();
 	fixup_device_tree_efika();
+	fixup_device_tree_pasemi();
 }
 
 static void __init prom_find_boot_cpu(void)
diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c
index bf91658..b1ec62f 100644
--- a/arch/powerpc/kernel/ptrace.c
+++ b/arch/powerpc/kernel/ptrace.c
@@ -39,6 +39,7 @@
 #include <asm/pgtable.h>
 #include <asm/switch_to.h>
 #include <asm/tm.h>
+#include <asm/asm-prototypes.h>
 
 #define CREATE_TRACE_POINTS
 #include <trace/events/syscalls.h>
@@ -402,13 +403,9 @@
 }
 
 /*
- * When the transaction is active, 'transact_fp' holds the current running
- * value of all FPR registers and 'fp_state' holds the last checkpointed
- * value of all FPR registers for the current transaction. When transaction
- * is not active 'fp_state' holds the current running state of all the FPR
- * registers. So this function which returns the current running values of
- * all the FPR registers, needs to know whether any transaction is active
- * or not.
+ * Regardless of transactions, 'fp_state' holds the current running
+ * value of all FPR registers and 'ckfp_state' holds the last checkpointed
+ * value of all FPR registers for the current transaction.
  *
  * Userspace interface buffer layout:
  *
@@ -416,13 +413,6 @@
  *	u64	fpr[32];
  *	u64	fpscr;
  * };
- *
- * There are two config options CONFIG_VSX and CONFIG_PPC_TRANSACTIONAL_MEM
- * which determines the final code in this function. All the combinations of
- * these two config options are possible except the one below as transactional
- * memory config pulls in CONFIG_VSX automatically.
- *
- *	!defined(CONFIG_VSX) && defined(CONFIG_PPC_TRANSACTIONAL_MEM)
  */
 static int fpr_get(struct task_struct *target, const struct user_regset *regset,
 		   unsigned int pos, unsigned int count,
@@ -431,50 +421,29 @@
 #ifdef CONFIG_VSX
 	u64 buf[33];
 	int i;
-#endif
+
 	flush_fp_to_thread(target);
 
-#if defined(CONFIG_VSX) && defined(CONFIG_PPC_TRANSACTIONAL_MEM)
-	/* copy to local buffer then write that out */
-	if (MSR_TM_ACTIVE(target->thread.regs->msr)) {
-		flush_altivec_to_thread(target);
-		flush_tmregs_to_thread(target);
-		for (i = 0; i < 32 ; i++)
-			buf[i] = target->thread.TS_TRANS_FPR(i);
-		buf[32] = target->thread.transact_fp.fpscr;
-	} else {
-		for (i = 0; i < 32 ; i++)
-			buf[i] = target->thread.TS_FPR(i);
-		buf[32] = target->thread.fp_state.fpscr;
-	}
-	return user_regset_copyout(&pos, &count, &kbuf, &ubuf, buf, 0, -1);
-#endif
-
-#if defined(CONFIG_VSX) && !defined(CONFIG_PPC_TRANSACTIONAL_MEM)
 	/* copy to local buffer then write that out */
 	for (i = 0; i < 32 ; i++)
 		buf[i] = target->thread.TS_FPR(i);
 	buf[32] = target->thread.fp_state.fpscr;
 	return user_regset_copyout(&pos, &count, &kbuf, &ubuf, buf, 0, -1);
-#endif
-
-#if !defined(CONFIG_VSX) && !defined(CONFIG_PPC_TRANSACTIONAL_MEM)
+#else
 	BUILD_BUG_ON(offsetof(struct thread_fp_state, fpscr) !=
 		     offsetof(struct thread_fp_state, fpr[32]));
 
+	flush_fp_to_thread(target);
+
 	return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
 				   &target->thread.fp_state, 0, -1);
 #endif
 }
 
 /*
- * When the transaction is active, 'transact_fp' holds the current running
- * value of all FPR registers and 'fp_state' holds the last checkpointed
- * value of all FPR registers for the current transaction. When transaction
- * is not active 'fp_state' holds the current running state of all the FPR
- * registers. So this function which setss the current running values of
- * all the FPR registers, needs to know whether any transaction is active
- * or not.
+ * Regardless of transactions, 'fp_state' holds the current running
+ * value of all FPR registers and 'ckfp_state' holds the last checkpointed
+ * value of all FPR registers for the current transaction.
  *
  * Userspace interface buffer layout:
  *
@@ -483,12 +452,6 @@
  *	u64	fpscr;
  * };
  *
- * There are two config options CONFIG_VSX and CONFIG_PPC_TRANSACTIONAL_MEM
- * which determines the final code in this function. All the combinations of
- * these two config options are possible except the one below as transactional
- * memory config pulls in CONFIG_VSX automatically.
- *
- *	!defined(CONFIG_VSX) && defined(CONFIG_PPC_TRANSACTIONAL_MEM)
  */
 static int fpr_set(struct task_struct *target, const struct user_regset *regset,
 		   unsigned int pos, unsigned int count,
@@ -497,44 +460,24 @@
 #ifdef CONFIG_VSX
 	u64 buf[33];
 	int i;
-#endif
+
 	flush_fp_to_thread(target);
 
-#if defined(CONFIG_VSX) && defined(CONFIG_PPC_TRANSACTIONAL_MEM)
 	/* copy to local buffer then write that out */
 	i = user_regset_copyin(&pos, &count, &kbuf, &ubuf, buf, 0, -1);
 	if (i)
 		return i;
 
-	if (MSR_TM_ACTIVE(target->thread.regs->msr)) {
-		flush_altivec_to_thread(target);
-		flush_tmregs_to_thread(target);
-		for (i = 0; i < 32 ; i++)
-			target->thread.TS_TRANS_FPR(i) = buf[i];
-		target->thread.transact_fp.fpscr = buf[32];
-	} else {
-		for (i = 0; i < 32 ; i++)
-			target->thread.TS_FPR(i) = buf[i];
-		target->thread.fp_state.fpscr = buf[32];
-	}
-	return 0;
-#endif
-
-#if defined(CONFIG_VSX) && !defined(CONFIG_PPC_TRANSACTIONAL_MEM)
-	/* copy to local buffer then write that out */
-	i = user_regset_copyin(&pos, &count, &kbuf, &ubuf, buf, 0, -1);
-	if (i)
-		return i;
 	for (i = 0; i < 32 ; i++)
 		target->thread.TS_FPR(i) = buf[i];
 	target->thread.fp_state.fpscr = buf[32];
 	return 0;
-#endif
-
-#if !defined(CONFIG_VSX) && !defined(CONFIG_PPC_TRANSACTIONAL_MEM)
+#else
 	BUILD_BUG_ON(offsetof(struct thread_fp_state, fpscr) !=
 		     offsetof(struct thread_fp_state, fpr[32]));
 
+	flush_fp_to_thread(target);
+
 	return user_regset_copyin(&pos, &count, &kbuf, &ubuf,
 				  &target->thread.fp_state, 0, -1);
 #endif
@@ -562,13 +505,10 @@
 }
 
 /*
- * When the transaction is active, 'transact_vr' holds the current running
- * value of all the VMX registers and 'vr_state' holds the last checkpointed
- * value of all the VMX registers for the current transaction to fall back
- * on in case it aborts. When transaction is not active 'vr_state' holds
- * the current running state of all the VMX registers. So this function which
- * gets the current running values of all the VMX registers, needs to know
- * whether any transaction is active or not.
+ * Regardless of transactions, 'vr_state' holds the current running
+ * value of all the VMX registers and 'ckvr_state' holds the last
+ * checkpointed value of all the VMX registers for the current
+ * transaction to fall back on in case it aborts.
  *
  * Userspace interface buffer layout:
  *
@@ -582,7 +522,6 @@
 		  unsigned int pos, unsigned int count,
 		  void *kbuf, void __user *ubuf)
 {
-	struct thread_vr_state *addr;
 	int ret;
 
 	flush_altivec_to_thread(target);
@@ -590,19 +529,8 @@
 	BUILD_BUG_ON(offsetof(struct thread_vr_state, vscr) !=
 		     offsetof(struct thread_vr_state, vr[32]));
 
-#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
-	if (MSR_TM_ACTIVE(target->thread.regs->msr)) {
-		flush_fp_to_thread(target);
-		flush_tmregs_to_thread(target);
-		addr = &target->thread.transact_vr;
-	} else {
-		addr = &target->thread.vr_state;
-	}
-#else
-	addr = &target->thread.vr_state;
-#endif
 	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
-				  addr, 0,
+				  &target->thread.vr_state, 0,
 				  33 * sizeof(vector128));
 	if (!ret) {
 		/*
@@ -614,14 +542,7 @@
 		} vrsave;
 		memset(&vrsave, 0, sizeof(vrsave));
 
-#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
-		if (MSR_TM_ACTIVE(target->thread.regs->msr))
-			vrsave.word = target->thread.transact_vrsave;
-		else
-			vrsave.word = target->thread.vrsave;
-#else
 		vrsave.word = target->thread.vrsave;
-#endif
 
 		ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, &vrsave,
 					  33 * sizeof(vector128), -1);
@@ -631,13 +552,10 @@
 }
 
 /*
- * When the transaction is active, 'transact_vr' holds the current running
- * value of all the VMX registers and 'vr_state' holds the last checkpointed
- * value of all the VMX registers for the current transaction to fall back
- * on in case it aborts. When transaction is not active 'vr_state' holds
- * the current running state of all the VMX registers. So this function which
- * sets the current running values of all the VMX registers, needs to know
- * whether any transaction is active or not.
+ * Regardless of transactions, 'vr_state' holds the current running
+ * value of all the VMX registers and 'ckvr_state' holds the last
+ * checkpointed value of all the VMX registers for the current
+ * transaction to fall back on in case it aborts.
  *
  * Userspace interface buffer layout:
  *
@@ -651,7 +569,6 @@
 		  unsigned int pos, unsigned int count,
 		  const void *kbuf, const void __user *ubuf)
 {
-	struct thread_vr_state *addr;
 	int ret;
 
 	flush_altivec_to_thread(target);
@@ -659,19 +576,8 @@
 	BUILD_BUG_ON(offsetof(struct thread_vr_state, vscr) !=
 		     offsetof(struct thread_vr_state, vr[32]));
 
-#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
-	if (MSR_TM_ACTIVE(target->thread.regs->msr)) {
-		flush_fp_to_thread(target);
-		flush_tmregs_to_thread(target);
-		addr = &target->thread.transact_vr;
-	} else {
-		addr = &target->thread.vr_state;
-	}
-#else
-	addr = &target->thread.vr_state;
-#endif
 	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
-				 addr, 0,
+				 &target->thread.vr_state, 0,
 				 33 * sizeof(vector128));
 	if (!ret && count > 0) {
 		/*
@@ -683,27 +589,12 @@
 		} vrsave;
 		memset(&vrsave, 0, sizeof(vrsave));
 
-#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
-		if (MSR_TM_ACTIVE(target->thread.regs->msr))
-			vrsave.word = target->thread.transact_vrsave;
-		else
-			vrsave.word = target->thread.vrsave;
-#else
 		vrsave.word = target->thread.vrsave;
-#endif
+
 		ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &vrsave,
 					 33 * sizeof(vector128), -1);
-		if (!ret) {
-
-#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
-			if (MSR_TM_ACTIVE(target->thread.regs->msr))
-				target->thread.transact_vrsave = vrsave.word;
-			else
-				target->thread.vrsave = vrsave.word;
-#else
+		if (!ret)
 			target->thread.vrsave = vrsave.word;
-#endif
-		}
 	}
 
 	return ret;
@@ -725,13 +616,10 @@
 }
 
 /*
- * When the transaction is active, 'transact_fp' holds the current running
- * value of all FPR registers and 'fp_state' holds the last checkpointed
- * value of all FPR registers for the current transaction. When transaction
- * is not active 'fp_state' holds the current running state of all the FPR
- * registers. So this function which returns the current running values of
- * all the FPR registers, needs to know whether any transaction is active
- * or not.
+ * Regardless of transactions, 'fp_state' holds the current running
+ * value of all FPR registers and 'ckfp_state' holds the last
+ * checkpointed value of all FPR registers for the current
+ * transaction.
  *
  * Userspace interface buffer layout:
  *
@@ -746,27 +634,14 @@
 	u64 buf[32];
 	int ret, i;
 
-#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
+	flush_tmregs_to_thread(target);
 	flush_fp_to_thread(target);
 	flush_altivec_to_thread(target);
-	flush_tmregs_to_thread(target);
-#endif
 	flush_vsx_to_thread(target);
 
-#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
-	if (MSR_TM_ACTIVE(target->thread.regs->msr)) {
-		for (i = 0; i < 32 ; i++)
-			buf[i] = target->thread.
-				transact_fp.fpr[i][TS_VSRLOWOFFSET];
-	} else {
-		for (i = 0; i < 32 ; i++)
-			buf[i] = target->thread.
-				fp_state.fpr[i][TS_VSRLOWOFFSET];
-	}
-#else
 	for (i = 0; i < 32 ; i++)
 		buf[i] = target->thread.fp_state.fpr[i][TS_VSRLOWOFFSET];
-#endif
+
 	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
 				  buf, 0, 32 * sizeof(double));
 
@@ -774,12 +649,10 @@
 }
 
 /*
- * When the transaction is active, 'transact_fp' holds the current running
- * value of all FPR registers and 'fp_state' holds the last checkpointed
- * value of all FPR registers for the current transaction. When transaction
- * is not active 'fp_state' holds the current running state of all the FPR
- * registers. So this function which sets the current running values of all
- * the FPR registers, needs to know whether any transaction is active or not.
+ * Regardless of transactions, 'fp_state' holds the current running
+ * value of all FPR registers and 'ckfp_state' holds the last
+ * checkpointed value of all FPR registers for the current
+ * transaction.
  *
  * Userspace interface buffer layout:
  *
@@ -794,31 +667,16 @@
 	u64 buf[32];
 	int ret,i;
 
-#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
+	flush_tmregs_to_thread(target);
 	flush_fp_to_thread(target);
 	flush_altivec_to_thread(target);
-	flush_tmregs_to_thread(target);
-#endif
 	flush_vsx_to_thread(target);
 
 	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
 				 buf, 0, 32 * sizeof(double));
-
-#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
-	if (MSR_TM_ACTIVE(target->thread.regs->msr)) {
+	if (!ret)
 		for (i = 0; i < 32 ; i++)
-			target->thread.transact_fp.
-				fpr[i][TS_VSRLOWOFFSET] = buf[i];
-	} else {
-		for (i = 0; i < 32 ; i++)
-			target->thread.fp_state.
-				fpr[i][TS_VSRLOWOFFSET] = buf[i];
-	}
-#else
-	for (i = 0; i < 32 ; i++)
-		target->thread.fp_state.fpr[i][TS_VSRLOWOFFSET] = buf[i];
-#endif
-
+			target->thread.fp_state.fpr[i][TS_VSRLOWOFFSET] = buf[i];
 
 	return ret;
 }
@@ -944,9 +802,9 @@
 	if (!MSR_TM_ACTIVE(target->thread.regs->msr))
 		return -ENODATA;
 
+	flush_tmregs_to_thread(target);
 	flush_fp_to_thread(target);
 	flush_altivec_to_thread(target);
-	flush_tmregs_to_thread(target);
 
 	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
 				  &target->thread.ckpt_regs,
@@ -1009,9 +867,9 @@
 	if (!MSR_TM_ACTIVE(target->thread.regs->msr))
 		return -ENODATA;
 
+	flush_tmregs_to_thread(target);
 	flush_fp_to_thread(target);
 	flush_altivec_to_thread(target);
-	flush_tmregs_to_thread(target);
 
 	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
 				 &target->thread.ckpt_regs,
@@ -1087,7 +945,7 @@
  *
  * This function gets in transaction checkpointed FPR registers.
  *
- * When the transaction is active 'fp_state' holds the checkpointed
+ * When the transaction is active 'ckfp_state' holds the checkpointed
  * values for the current transaction to fall back on if it aborts
  * in between. This function gets those checkpointed FPR registers.
  * The userspace interface buffer layout is as follows.
@@ -1111,14 +969,14 @@
 	if (!MSR_TM_ACTIVE(target->thread.regs->msr))
 		return -ENODATA;
 
+	flush_tmregs_to_thread(target);
 	flush_fp_to_thread(target);
 	flush_altivec_to_thread(target);
-	flush_tmregs_to_thread(target);
 
 	/* copy to local buffer then write that out */
 	for (i = 0; i < 32 ; i++)
-		buf[i] = target->thread.TS_FPR(i);
-	buf[32] = target->thread.fp_state.fpscr;
+		buf[i] = target->thread.TS_CKFPR(i);
+	buf[32] = target->thread.ckfp_state.fpscr;
 	return user_regset_copyout(&pos, &count, &kbuf, &ubuf, buf, 0, -1);
 }
 
@@ -1133,7 +991,7 @@
  *
  * This function sets in transaction checkpointed FPR registers.
  *
- * When the transaction is active 'fp_state' holds the checkpointed
+ * When the transaction is active 'ckfp_state' holds the checkpointed
  * FPR register values for the current transaction to fall back on
  * if it aborts in between. This function sets these checkpointed
  * FPR registers. The userspace interface buffer layout is as follows.
@@ -1157,17 +1015,17 @@
 	if (!MSR_TM_ACTIVE(target->thread.regs->msr))
 		return -ENODATA;
 
+	flush_tmregs_to_thread(target);
 	flush_fp_to_thread(target);
 	flush_altivec_to_thread(target);
-	flush_tmregs_to_thread(target);
 
 	/* copy to local buffer then write that out */
 	i = user_regset_copyin(&pos, &count, &kbuf, &ubuf, buf, 0, -1);
 	if (i)
 		return i;
 	for (i = 0; i < 32 ; i++)
-		target->thread.TS_FPR(i) = buf[i];
-	target->thread.fp_state.fpscr = buf[32];
+		target->thread.TS_CKFPR(i) = buf[i];
+	target->thread.ckfp_state.fpscr = buf[32];
 	return 0;
 }
 
@@ -1202,7 +1060,7 @@
  *
  * This function gets in transaction checkpointed VMX registers.
  *
- * When the transaction is active 'vr_state' and 'vr_save' hold
+ * When the transaction is active 'ckvr_state' and 'ckvrsave' hold
  * the checkpointed values for the current transaction to fall
  * back on if it aborts in between. The userspace interface buffer
  * layout is as follows.
@@ -1229,12 +1087,12 @@
 		return -ENODATA;
 
 	/* Flush the state */
+	flush_tmregs_to_thread(target);
 	flush_fp_to_thread(target);
 	flush_altivec_to_thread(target);
-	flush_tmregs_to_thread(target);
 
 	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
-					&target->thread.vr_state, 0,
+					&target->thread.ckvr_state, 0,
 					33 * sizeof(vector128));
 	if (!ret) {
 		/*
@@ -1245,7 +1103,7 @@
 			u32 word;
 		} vrsave;
 		memset(&vrsave, 0, sizeof(vrsave));
-		vrsave.word = target->thread.vrsave;
+		vrsave.word = target->thread.ckvrsave;
 		ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, &vrsave,
 						33 * sizeof(vector128), -1);
 	}
@@ -1264,7 +1122,7 @@
  *
  * This function sets in transaction checkpointed VMX registers.
  *
- * When the transaction is active 'vr_state' and 'vr_save' hold
+ * When the transaction is active 'ckvr_state' and 'ckvrsave' hold
  * the checkpointed values for the current transaction to fall
  * back on if it aborts in between. The userspace interface buffer
  * layout is as follows.
@@ -1290,12 +1148,12 @@
 	if (!MSR_TM_ACTIVE(target->thread.regs->msr))
 		return -ENODATA;
 
+	flush_tmregs_to_thread(target);
 	flush_fp_to_thread(target);
 	flush_altivec_to_thread(target);
-	flush_tmregs_to_thread(target);
 
 	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
-					&target->thread.vr_state, 0,
+					&target->thread.ckvr_state, 0,
 					33 * sizeof(vector128));
 	if (!ret && count > 0) {
 		/*
@@ -1306,11 +1164,11 @@
 			u32 word;
 		} vrsave;
 		memset(&vrsave, 0, sizeof(vrsave));
-		vrsave.word = target->thread.vrsave;
+		vrsave.word = target->thread.ckvrsave;
 		ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &vrsave,
 						33 * sizeof(vector128), -1);
 		if (!ret)
-			target->thread.vrsave = vrsave.word;
+			target->thread.ckvrsave = vrsave.word;
 	}
 
 	return ret;
@@ -1348,7 +1206,7 @@
  *
  * This function gets in transaction checkpointed VSX registers.
  *
- * When the transaction is active 'fp_state' holds the checkpointed
+ * When the transaction is active 'ckfp_state' holds the checkpointed
  * values for the current transaction to fall back on if it aborts
  * in between. This function gets those checkpointed VSX registers.
  * The userspace interface buffer layout is as follows.
@@ -1372,13 +1230,13 @@
 		return -ENODATA;
 
 	/* Flush the state */
+	flush_tmregs_to_thread(target);
 	flush_fp_to_thread(target);
 	flush_altivec_to_thread(target);
-	flush_tmregs_to_thread(target);
 	flush_vsx_to_thread(target);
 
 	for (i = 0; i < 32 ; i++)
-		buf[i] = target->thread.fp_state.fpr[i][TS_VSRLOWOFFSET];
+		buf[i] = target->thread.ckfp_state.fpr[i][TS_VSRLOWOFFSET];
 	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
 				  buf, 0, 32 * sizeof(double));
 
@@ -1396,7 +1254,7 @@
  *
  * This function sets in transaction checkpointed VSX registers.
  *
- * When the transaction is active 'fp_state' holds the checkpointed
+ * When the transaction is active 'ckfp_state' holds the checkpointed
  * VSX register values for the current transaction to fall back on
  * if it aborts in between. This function sets these checkpointed
  * FPR registers. The userspace interface buffer layout is as follows.
@@ -1420,15 +1278,16 @@
 		return -ENODATA;
 
 	/* Flush the state */
+	flush_tmregs_to_thread(target);
 	flush_fp_to_thread(target);
 	flush_altivec_to_thread(target);
-	flush_tmregs_to_thread(target);
 	flush_vsx_to_thread(target);
 
 	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
 				 buf, 0, 32 * sizeof(double));
-	for (i = 0; i < 32 ; i++)
-		target->thread.fp_state.fpr[i][TS_VSRLOWOFFSET] = buf[i];
+	if (!ret)
+		for (i = 0; i < 32 ; i++)
+			target->thread.ckfp_state.fpr[i][TS_VSRLOWOFFSET] = buf[i];
 
 	return ret;
 }
@@ -1484,9 +1343,9 @@
 		return -ENODEV;
 
 	/* Flush the states */
+	flush_tmregs_to_thread(target);
 	flush_fp_to_thread(target);
 	flush_altivec_to_thread(target);
-	flush_tmregs_to_thread(target);
 
 	/* TFHAR register */
 	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
@@ -1540,9 +1399,9 @@
 		return -ENODEV;
 
 	/* Flush the states */
+	flush_tmregs_to_thread(target);
 	flush_fp_to_thread(target);
 	flush_altivec_to_thread(target);
-	flush_tmregs_to_thread(target);
 
 	/* TFHAR register */
 	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
@@ -2065,33 +1924,12 @@
 static int gpr32_get_common(struct task_struct *target,
 		     const struct user_regset *regset,
 		     unsigned int pos, unsigned int count,
-			    void *kbuf, void __user *ubuf, bool tm_active)
+			    void *kbuf, void __user *ubuf,
+			    unsigned long *regs)
 {
-	const unsigned long *regs = &target->thread.regs->gpr[0];
-	const unsigned long *ckpt_regs;
 	compat_ulong_t *k = kbuf;
 	compat_ulong_t __user *u = ubuf;
 	compat_ulong_t reg;
-	int i;
-
-#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
-	ckpt_regs = &target->thread.ckpt_regs.gpr[0];
-#endif
-	if (tm_active) {
-		regs = ckpt_regs;
-	} else {
-		if (target->thread.regs == NULL)
-			return -EIO;
-
-		if (!FULL_REGS(target->thread.regs)) {
-			/*
-			 * We have a partial register set.
-			 * Fill 14-31 with bogus values.
-			 */
-			for (i = 14; i < 32; i++)
-				target->thread.regs->gpr[i] = NV_REG_POISON;
-		}
-	}
 
 	pos /= sizeof(reg);
 	count /= sizeof(reg);
@@ -2133,29 +1971,13 @@
 static int gpr32_set_common(struct task_struct *target,
 		     const struct user_regset *regset,
 		     unsigned int pos, unsigned int count,
-		     const void *kbuf, const void __user *ubuf, bool tm_active)
+		     const void *kbuf, const void __user *ubuf,
+		     unsigned long *regs)
 {
-	unsigned long *regs = &target->thread.regs->gpr[0];
-	unsigned long *ckpt_regs;
 	const compat_ulong_t *k = kbuf;
 	const compat_ulong_t __user *u = ubuf;
 	compat_ulong_t reg;
 
-#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
-	ckpt_regs = &target->thread.ckpt_regs.gpr[0];
-#endif
-
-	if (tm_active) {
-		regs = ckpt_regs;
-	} else {
-		regs = &target->thread.regs->gpr[0];
-
-		if (target->thread.regs == NULL)
-			return -EIO;
-
-		CHECK_FULL_REGS(target->thread.regs);
-	}
-
 	pos /= sizeof(reg);
 	count /= sizeof(reg);
 
@@ -2220,7 +2042,8 @@
 		     unsigned int pos, unsigned int count,
 		     void *kbuf, void __user *ubuf)
 {
-	return gpr32_get_common(target, regset, pos, count, kbuf, ubuf, 1);
+	return gpr32_get_common(target, regset, pos, count, kbuf, ubuf,
+			&target->thread.ckpt_regs.gpr[0]);
 }
 
 static int tm_cgpr32_set(struct task_struct *target,
@@ -2228,7 +2051,8 @@
 		     unsigned int pos, unsigned int count,
 		     const void *kbuf, const void __user *ubuf)
 {
-	return gpr32_set_common(target, regset, pos, count, kbuf, ubuf, 1);
+	return gpr32_set_common(target, regset, pos, count, kbuf, ubuf,
+			&target->thread.ckpt_regs.gpr[0]);
 }
 #endif /* CONFIG_PPC_TRANSACTIONAL_MEM */
 
@@ -2237,7 +2061,21 @@
 		     unsigned int pos, unsigned int count,
 		     void *kbuf, void __user *ubuf)
 {
-	return gpr32_get_common(target, regset, pos, count, kbuf, ubuf, 0);
+	int i;
+
+	if (target->thread.regs == NULL)
+		return -EIO;
+
+	if (!FULL_REGS(target->thread.regs)) {
+		/*
+		 * We have a partial register set.
+		 * Fill 14-31 with bogus values.
+		 */
+		for (i = 14; i < 32; i++)
+			target->thread.regs->gpr[i] = NV_REG_POISON;
+	}
+	return gpr32_get_common(target, regset, pos, count, kbuf, ubuf,
+			&target->thread.regs->gpr[0]);
 }
 
 static int gpr32_set(struct task_struct *target,
@@ -2245,7 +2083,12 @@
 		     unsigned int pos, unsigned int count,
 		     const void *kbuf, const void __user *ubuf)
 {
-	return gpr32_set_common(target, regset, pos, count, kbuf, ubuf, 0);
+	if (target->thread.regs == NULL)
+		return -EIO;
+
+	CHECK_FULL_REGS(target->thread.regs);
+	return gpr32_set_common(target, regset, pos, count, kbuf, ubuf,
+			&target->thread.regs->gpr[0]);
 }
 
 /*
diff --git a/arch/powerpc/kernel/signal.c b/arch/powerpc/kernel/signal.c
index cb64d6f..bbe77ae 100644
--- a/arch/powerpc/kernel/signal.c
+++ b/arch/powerpc/kernel/signal.c
@@ -99,22 +99,24 @@
 	}
 }
 
-static void do_signal(struct pt_regs *regs)
+static void do_signal(struct task_struct *tsk)
 {
 	sigset_t *oldset = sigmask_to_save();
 	struct ksignal ksig;
 	int ret;
 	int is32 = is_32bit_task();
 
+	BUG_ON(tsk != current);
+
 	get_signal(&ksig);
 
 	/* Is there any syscall restart business here ? */
-	check_syscall_restart(regs, &ksig.ka, ksig.sig > 0);
+	check_syscall_restart(tsk->thread.regs, &ksig.ka, ksig.sig > 0);
 
 	if (ksig.sig <= 0) {
 		/* No signal to deliver -- put the saved sigmask back */
 		restore_saved_sigmask();
-		regs->trap = 0;
+		tsk->thread.regs->trap = 0;
 		return;               /* no signals delivered */
 	}
 
@@ -124,23 +126,22 @@
 	 * user space. The DABR will have been cleared if it
 	 * triggered inside the kernel.
 	 */
-	if (current->thread.hw_brk.address &&
-		current->thread.hw_brk.type)
-		__set_breakpoint(&current->thread.hw_brk);
+	if (tsk->thread.hw_brk.address && tsk->thread.hw_brk.type)
+		__set_breakpoint(&tsk->thread.hw_brk);
 #endif
 	/* Re-enable the breakpoints for the signal stack */
-	thread_change_pc(current, regs);
+	thread_change_pc(tsk, tsk->thread.regs);
 
 	if (is32) {
         	if (ksig.ka.sa.sa_flags & SA_SIGINFO)
-			ret = handle_rt_signal32(&ksig, oldset, regs);
+			ret = handle_rt_signal32(&ksig, oldset, tsk);
 		else
-			ret = handle_signal32(&ksig, oldset, regs);
+			ret = handle_signal32(&ksig, oldset, tsk);
 	} else {
-		ret = handle_rt_signal64(&ksig, oldset, regs);
+		ret = handle_rt_signal64(&ksig, oldset, tsk);
 	}
 
-	regs->trap = 0;
+	tsk->thread.regs->trap = 0;
 	signal_setup_done(ret, &ksig, test_thread_flag(TIF_SINGLESTEP));
 }
 
@@ -151,8 +152,10 @@
 	if (thread_info_flags & _TIF_UPROBE)
 		uprobe_notify_resume(regs);
 
-	if (thread_info_flags & _TIF_SIGPENDING)
-		do_signal(regs);
+	if (thread_info_flags & _TIF_SIGPENDING) {
+		BUG_ON(regs != current->thread.regs);
+		do_signal(current);
+	}
 
 	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
 		clear_thread_flag(TIF_NOTIFY_RESUME);
@@ -162,7 +165,7 @@
 	user_enter();
 }
 
-unsigned long get_tm_stackpointer(struct pt_regs *regs)
+unsigned long get_tm_stackpointer(struct task_struct *tsk)
 {
 	/* When in an active transaction that takes a signal, we need to be
 	 * careful with the stack.  It's possible that the stack has moved back
@@ -187,11 +190,13 @@
 	 */
 
 #ifdef CONFIG_PPC_TRANSACTIONAL_MEM
-	if (MSR_TM_ACTIVE(regs->msr)) {
+	BUG_ON(tsk != current);
+
+	if (MSR_TM_ACTIVE(tsk->thread.regs->msr)) {
 		tm_reclaim_current(TM_CAUSE_SIGNAL);
-		if (MSR_TM_TRANSACTIONAL(regs->msr))
-			return current->thread.ckpt_regs.gpr[1];
+		if (MSR_TM_TRANSACTIONAL(tsk->thread.regs->msr))
+			return tsk->thread.ckpt_regs.gpr[1];
 	}
 #endif
-	return regs->gpr[1];
+	return tsk->thread.regs->gpr[1];
 }
diff --git a/arch/powerpc/kernel/signal.h b/arch/powerpc/kernel/signal.h
index be305c8..7c59d88 100644
--- a/arch/powerpc/kernel/signal.h
+++ b/arch/powerpc/kernel/signal.h
@@ -16,39 +16,41 @@
 				  size_t frame_size, int is_32);
 
 extern int handle_signal32(struct ksignal *ksig, sigset_t *oldset,
-			   struct pt_regs *regs);
+			   struct task_struct *tsk);
 
 extern int handle_rt_signal32(struct ksignal *ksig, sigset_t *oldset,
-			      struct pt_regs *regs);
+			      struct task_struct *tsk);
 
 extern unsigned long copy_fpr_to_user(void __user *to,
 				      struct task_struct *task);
-extern unsigned long copy_transact_fpr_to_user(void __user *to,
+extern unsigned long copy_ckfpr_to_user(void __user *to,
 					       struct task_struct *task);
 extern unsigned long copy_fpr_from_user(struct task_struct *task,
 					void __user *from);
-extern unsigned long copy_transact_fpr_from_user(struct task_struct *task,
+extern unsigned long copy_ckfpr_from_user(struct task_struct *task,
 						 void __user *from);
+extern unsigned long get_tm_stackpointer(struct task_struct *tsk);
+
 #ifdef CONFIG_VSX
 extern unsigned long copy_vsx_to_user(void __user *to,
 				      struct task_struct *task);
-extern unsigned long copy_transact_vsx_to_user(void __user *to,
+extern unsigned long copy_ckvsx_to_user(void __user *to,
 					       struct task_struct *task);
 extern unsigned long copy_vsx_from_user(struct task_struct *task,
 					void __user *from);
-extern unsigned long copy_transact_vsx_from_user(struct task_struct *task,
+extern unsigned long copy_ckvsx_from_user(struct task_struct *task,
 						 void __user *from);
 #endif
 
 #ifdef CONFIG_PPC64
 
 extern int handle_rt_signal64(struct ksignal *ksig, sigset_t *set,
-			      struct pt_regs *regs);
+			      struct task_struct *tsk);
 
 #else /* CONFIG_PPC64 */
 
 static inline int handle_rt_signal64(struct ksignal *ksig, sigset_t *set,
-				     struct pt_regs *regs)
+				     struct task_struct *tsk)
 {
 	return -EFAULT;
 }
diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c
index a7daf74..27aa913 100644
--- a/arch/powerpc/kernel/signal_32.c
+++ b/arch/powerpc/kernel/signal_32.c
@@ -44,6 +44,7 @@
 #include <asm/vdso.h>
 #include <asm/switch_to.h>
 #include <asm/tm.h>
+#include <asm/asm-prototypes.h>
 #ifdef CONFIG_PPC64
 #include "ppc32.h"
 #include <asm/unistd.h>
@@ -315,7 +316,7 @@
 }
 
 #ifdef CONFIG_PPC_TRANSACTIONAL_MEM
-unsigned long copy_transact_fpr_to_user(void __user *to,
+unsigned long copy_ckfpr_to_user(void __user *to,
 				  struct task_struct *task)
 {
 	u64 buf[ELF_NFPREG];
@@ -323,12 +324,12 @@
 
 	/* save FPR copy to local buffer then write to the thread_struct */
 	for (i = 0; i < (ELF_NFPREG - 1) ; i++)
-		buf[i] = task->thread.TS_TRANS_FPR(i);
-	buf[i] = task->thread.transact_fp.fpscr;
+		buf[i] = task->thread.TS_CKFPR(i);
+	buf[i] = task->thread.ckfp_state.fpscr;
 	return __copy_to_user(to, buf, ELF_NFPREG * sizeof(double));
 }
 
-unsigned long copy_transact_fpr_from_user(struct task_struct *task,
+unsigned long copy_ckfpr_from_user(struct task_struct *task,
 					  void __user *from)
 {
 	u64 buf[ELF_NFPREG];
@@ -337,13 +338,13 @@
 	if (__copy_from_user(buf, from, ELF_NFPREG * sizeof(double)))
 		return 1;
 	for (i = 0; i < (ELF_NFPREG - 1) ; i++)
-		task->thread.TS_TRANS_FPR(i) = buf[i];
-	task->thread.transact_fp.fpscr = buf[i];
+		task->thread.TS_CKFPR(i) = buf[i];
+	task->thread.ckfp_state.fpscr = buf[i];
 
 	return 0;
 }
 
-unsigned long copy_transact_vsx_to_user(void __user *to,
+unsigned long copy_ckvsx_to_user(void __user *to,
 				  struct task_struct *task)
 {
 	u64 buf[ELF_NVSRHALFREG];
@@ -351,11 +352,11 @@
 
 	/* save FPR copy to local buffer then write to the thread_struct */
 	for (i = 0; i < ELF_NVSRHALFREG; i++)
-		buf[i] = task->thread.transact_fp.fpr[i][TS_VSRLOWOFFSET];
+		buf[i] = task->thread.ckfp_state.fpr[i][TS_VSRLOWOFFSET];
 	return __copy_to_user(to, buf, ELF_NVSRHALFREG * sizeof(double));
 }
 
-unsigned long copy_transact_vsx_from_user(struct task_struct *task,
+unsigned long copy_ckvsx_from_user(struct task_struct *task,
 					  void __user *from)
 {
 	u64 buf[ELF_NVSRHALFREG];
@@ -364,7 +365,7 @@
 	if (__copy_from_user(buf, from, ELF_NVSRHALFREG * sizeof(double)))
 		return 1;
 	for (i = 0; i < ELF_NVSRHALFREG ; i++)
-		task->thread.transact_fp.fpr[i][TS_VSRLOWOFFSET] = buf[i];
+		task->thread.ckfp_state.fpr[i][TS_VSRLOWOFFSET] = buf[i];
 	return 0;
 }
 #endif /* CONFIG_PPC_TRANSACTIONAL_MEM */
@@ -384,17 +385,17 @@
 }
 
 #ifdef CONFIG_PPC_TRANSACTIONAL_MEM
-inline unsigned long copy_transact_fpr_to_user(void __user *to,
+inline unsigned long copy_ckfpr_to_user(void __user *to,
 					 struct task_struct *task)
 {
-	return __copy_to_user(to, task->thread.transact_fp.fpr,
+	return __copy_to_user(to, task->thread.ckfp_state.fpr,
 			      ELF_NFPREG * sizeof(double));
 }
 
-inline unsigned long copy_transact_fpr_from_user(struct task_struct *task,
+inline unsigned long copy_ckfpr_from_user(struct task_struct *task,
 						 void __user *from)
 {
-	return __copy_from_user(task->thread.transact_fp.fpr, from,
+	return __copy_from_user(task->thread.ckfp_state.fpr, from,
 				ELF_NFPREG * sizeof(double));
 }
 #endif /* CONFIG_PPC_TRANSACTIONAL_MEM */
@@ -525,9 +526,6 @@
 	 */
 	regs->msr &= ~MSR_TS_MASK;
 
-	/* Make sure floating point registers are stored in regs */
-	flush_fp_to_thread(current);
-
 	/* Save both sets of general registers */
 	if (save_general_regs(&current->thread.ckpt_regs, frame)
 	    || save_general_regs(regs, tm_frame))
@@ -545,18 +543,17 @@
 #ifdef CONFIG_ALTIVEC
 	/* save altivec registers */
 	if (current->thread.used_vr) {
-		flush_altivec_to_thread(current);
-		if (__copy_to_user(&frame->mc_vregs, &current->thread.vr_state,
+		if (__copy_to_user(&frame->mc_vregs, &current->thread.ckvr_state,
 				   ELF_NVRREG * sizeof(vector128)))
 			return 1;
 		if (msr & MSR_VEC) {
 			if (__copy_to_user(&tm_frame->mc_vregs,
-					   &current->thread.transact_vr,
+					   &current->thread.vr_state,
 					   ELF_NVRREG * sizeof(vector128)))
 				return 1;
 		} else {
 			if (__copy_to_user(&tm_frame->mc_vregs,
-					   &current->thread.vr_state,
+					   &current->thread.ckvr_state,
 					   ELF_NVRREG * sizeof(vector128)))
 				return 1;
 		}
@@ -573,28 +570,28 @@
 	 * most significant bits of that same vector. --BenH
 	 */
 	if (cpu_has_feature(CPU_FTR_ALTIVEC))
-		current->thread.vrsave = mfspr(SPRN_VRSAVE);
-	if (__put_user(current->thread.vrsave,
+		current->thread.ckvrsave = mfspr(SPRN_VRSAVE);
+	if (__put_user(current->thread.ckvrsave,
 		       (u32 __user *)&frame->mc_vregs[32]))
 		return 1;
 	if (msr & MSR_VEC) {
-		if (__put_user(current->thread.transact_vrsave,
+		if (__put_user(current->thread.vrsave,
 			       (u32 __user *)&tm_frame->mc_vregs[32]))
 			return 1;
 	} else {
-		if (__put_user(current->thread.vrsave,
+		if (__put_user(current->thread.ckvrsave,
 			       (u32 __user *)&tm_frame->mc_vregs[32]))
 			return 1;
 	}
 #endif /* CONFIG_ALTIVEC */
 
-	if (copy_fpr_to_user(&frame->mc_fregs, current))
+	if (copy_ckfpr_to_user(&frame->mc_fregs, current))
 		return 1;
 	if (msr & MSR_FP) {
-		if (copy_transact_fpr_to_user(&tm_frame->mc_fregs, current))
+		if (copy_fpr_to_user(&tm_frame->mc_fregs, current))
 			return 1;
 	} else {
-		if (copy_fpr_to_user(&tm_frame->mc_fregs, current))
+		if (copy_ckfpr_to_user(&tm_frame->mc_fregs, current))
 			return 1;
 	}
 
@@ -606,15 +603,14 @@
 	 * contains valid data
 	 */
 	if (current->thread.used_vsr) {
-		flush_vsx_to_thread(current);
-		if (copy_vsx_to_user(&frame->mc_vsregs, current))
+		if (copy_ckvsx_to_user(&frame->mc_vsregs, current))
 			return 1;
 		if (msr & MSR_VSX) {
-			if (copy_transact_vsx_to_user(&tm_frame->mc_vsregs,
+			if (copy_vsx_to_user(&tm_frame->mc_vsregs,
 						      current))
 				return 1;
 		} else {
-			if (copy_vsx_to_user(&tm_frame->mc_vsregs, current))
+			if (copy_ckvsx_to_user(&tm_frame->mc_vsregs, current))
 				return 1;
 		}
 
@@ -698,6 +694,7 @@
 		if (__copy_from_user(&current->thread.vr_state, &sr->mc_vregs,
 				     sizeof(sr->mc_vregs)))
 			return 1;
+		current->thread.used_vr = true;
 	} else if (current->thread.used_vr)
 		memset(&current->thread.vr_state, 0,
 		       ELF_NVRREG * sizeof(vector128));
@@ -724,6 +721,7 @@
 		 */
 		if (copy_vsx_from_user(current, &sr->mc_vsregs))
 			return 1;
+		current->thread.used_vsr = true;
 	} else if (current->thread.used_vsr)
 		for (i = 0; i < 32 ; i++)
 			current->thread.fp_state.fpr[i][TS_VSRLOWOFFSET] = 0;
@@ -743,6 +741,7 @@
 		if (__copy_from_user(current->thread.evr, &sr->mc_vregs,
 				     ELF_NEVRREG * sizeof(u32)))
 			return 1;
+		current->thread.used_spe = true;
 	} else if (current->thread.used_spe)
 		memset(current->thread.evr, 0, ELF_NEVRREG * sizeof(u32));
 
@@ -793,33 +792,34 @@
 	regs->msr &= ~MSR_VEC;
 	if (msr & MSR_VEC) {
 		/* restore altivec registers from the stack */
-		if (__copy_from_user(&current->thread.vr_state, &sr->mc_vregs,
+		if (__copy_from_user(&current->thread.ckvr_state, &sr->mc_vregs,
 				     sizeof(sr->mc_vregs)) ||
-		    __copy_from_user(&current->thread.transact_vr,
+		    __copy_from_user(&current->thread.vr_state,
 				     &tm_sr->mc_vregs,
 				     sizeof(sr->mc_vregs)))
 			return 1;
+		current->thread.used_vr = true;
 	} else if (current->thread.used_vr) {
 		memset(&current->thread.vr_state, 0,
 		       ELF_NVRREG * sizeof(vector128));
-		memset(&current->thread.transact_vr, 0,
+		memset(&current->thread.ckvr_state, 0,
 		       ELF_NVRREG * sizeof(vector128));
 	}
 
 	/* Always get VRSAVE back */
-	if (__get_user(current->thread.vrsave,
+	if (__get_user(current->thread.ckvrsave,
 		       (u32 __user *)&sr->mc_vregs[32]) ||
-	    __get_user(current->thread.transact_vrsave,
+	    __get_user(current->thread.vrsave,
 		       (u32 __user *)&tm_sr->mc_vregs[32]))
 		return 1;
 	if (cpu_has_feature(CPU_FTR_ALTIVEC))
-		mtspr(SPRN_VRSAVE, current->thread.vrsave);
+		mtspr(SPRN_VRSAVE, current->thread.ckvrsave);
 #endif /* CONFIG_ALTIVEC */
 
 	regs->msr &= ~(MSR_FP | MSR_FE0 | MSR_FE1);
 
 	if (copy_fpr_from_user(current, &sr->mc_fregs) ||
-	    copy_transact_fpr_from_user(current, &tm_sr->mc_fregs))
+	    copy_ckfpr_from_user(current, &tm_sr->mc_fregs))
 		return 1;
 
 #ifdef CONFIG_VSX
@@ -829,13 +829,14 @@
 		 * Restore altivec registers from the stack to a local
 		 * buffer, then write this out to the thread_struct
 		 */
-		if (copy_vsx_from_user(current, &sr->mc_vsregs) ||
-		    copy_transact_vsx_from_user(current, &tm_sr->mc_vsregs))
+		if (copy_vsx_from_user(current, &tm_sr->mc_vsregs) ||
+		    copy_ckvsx_from_user(current, &sr->mc_vsregs))
 			return 1;
+		current->thread.used_vsr = true;
 	} else if (current->thread.used_vsr)
 		for (i = 0; i < 32 ; i++) {
 			current->thread.fp_state.fpr[i][TS_VSRLOWOFFSET] = 0;
-			current->thread.transact_fp.fpr[i][TS_VSRLOWOFFSET] = 0;
+			current->thread.ckfp_state.fpr[i][TS_VSRLOWOFFSET] = 0;
 		}
 #endif /* CONFIG_VSX */
 
@@ -848,6 +849,7 @@
 		if (__copy_from_user(current->thread.evr, &sr->mc_vregs,
 				     ELF_NEVRREG * sizeof(u32)))
 			return 1;
+		current->thread.used_spe = true;
 	} else if (current->thread.used_spe)
 		memset(current->thread.evr, 0, ELF_NEVRREG * sizeof(u32));
 
@@ -877,13 +879,14 @@
 	tm_recheckpoint(&current->thread, msr);
 
 	/* This loads the speculative FP/VEC state, if used */
+	msr_check_and_set(msr & (MSR_FP | MSR_VEC));
 	if (msr & MSR_FP) {
-		do_load_up_transact_fpu(&current->thread);
+		load_fp_state(&current->thread.fp_state);
 		regs->msr |= (MSR_FP | current->thread.fpexc_mode);
 	}
 #ifdef CONFIG_ALTIVEC
 	if (msr & MSR_VEC) {
-		do_load_up_transact_altivec(&current->thread);
+		load_vr_state(&current->thread.vr_state);
 		regs->msr |= MSR_VEC;
 	}
 #endif
@@ -971,7 +974,7 @@
  * (one which gets siginfo).
  */
 int handle_rt_signal32(struct ksignal *ksig, sigset_t *oldset,
-		       struct pt_regs *regs)
+		       struct task_struct *tsk)
 {
 	struct rt_sigframe __user *rt_sf;
 	struct mcontext __user *frame;
@@ -980,10 +983,13 @@
 	unsigned long newsp = 0;
 	int sigret;
 	unsigned long tramp;
+	struct pt_regs *regs = tsk->thread.regs;
+
+	BUG_ON(tsk != current);
 
 	/* Set up Signal Frame */
 	/* Put a Real Time Context onto stack */
-	rt_sf = get_sigframe(ksig, get_tm_stackpointer(regs), sizeof(*rt_sf), 1);
+	rt_sf = get_sigframe(ksig, get_tm_stackpointer(tsk), sizeof(*rt_sf), 1);
 	addr = rt_sf;
 	if (unlikely(rt_sf == NULL))
 		goto badframe;
@@ -1000,9 +1006,9 @@
 	/* Save user registers on the stack */
 	frame = &rt_sf->uc.uc_mcontext;
 	addr = frame;
-	if (vdso32_rt_sigtramp && current->mm->context.vdso_base) {
+	if (vdso32_rt_sigtramp && tsk->mm->context.vdso_base) {
 		sigret = 0;
-		tramp = current->mm->context.vdso_base + vdso32_rt_sigtramp;
+		tramp = tsk->mm->context.vdso_base + vdso32_rt_sigtramp;
 	} else {
 		sigret = __NR_rt_sigreturn;
 		tramp = (unsigned long) frame->tramp;
@@ -1029,7 +1035,7 @@
 	}
 	regs->link = tramp;
 
-	current->thread.fp_state.fpscr = 0;	/* turn off all fp exceptions */
+	tsk->thread.fp_state.fpscr = 0;	/* turn off all fp exceptions */
 
 	/* create a stack frame for the caller of the handler */
 	newsp = ((unsigned long)rt_sf) - (__SIGNAL_FRAMESIZE + 16);
@@ -1054,7 +1060,7 @@
 		printk_ratelimited(KERN_INFO
 				   "%s[%d]: bad frame in handle_rt_signal32: "
 				   "%p nip %08lx lr %08lx\n",
-				   current->comm, current->pid,
+				   tsk->comm, tsk->pid,
 				   addr, regs->nip, regs->link);
 
 	return 1;
@@ -1410,7 +1416,8 @@
 /*
  * OK, we're invoking a handler
  */
-int handle_signal32(struct ksignal *ksig, sigset_t *oldset, struct pt_regs *regs)
+int handle_signal32(struct ksignal *ksig, sigset_t *oldset,
+		struct task_struct *tsk)
 {
 	struct sigcontext __user *sc;
 	struct sigframe __user *frame;
@@ -1418,9 +1425,12 @@
 	unsigned long newsp = 0;
 	int sigret;
 	unsigned long tramp;
+	struct pt_regs *regs = tsk->thread.regs;
+
+	BUG_ON(tsk != current);
 
 	/* Set up Signal Frame */
-	frame = get_sigframe(ksig, get_tm_stackpointer(regs), sizeof(*frame), 1);
+	frame = get_sigframe(ksig, get_tm_stackpointer(tsk), sizeof(*frame), 1);
 	if (unlikely(frame == NULL))
 		goto badframe;
 	sc = (struct sigcontext __user *) &frame->sctx;
@@ -1439,9 +1449,9 @@
 	    || __put_user(ksig->sig, &sc->signal))
 		goto badframe;
 
-	if (vdso32_sigtramp && current->mm->context.vdso_base) {
+	if (vdso32_sigtramp && tsk->mm->context.vdso_base) {
 		sigret = 0;
-		tramp = current->mm->context.vdso_base + vdso32_sigtramp;
+		tramp = tsk->mm->context.vdso_base + vdso32_sigtramp;
 	} else {
 		sigret = __NR_sigreturn;
 		tramp = (unsigned long) frame->mctx.tramp;
@@ -1463,7 +1473,7 @@
 
 	regs->link = tramp;
 
-	current->thread.fp_state.fpscr = 0;	/* turn off all fp exceptions */
+	tsk->thread.fp_state.fpscr = 0;	/* turn off all fp exceptions */
 
 	/* create a stack frame for the caller of the handler */
 	newsp = ((unsigned long)frame) - __SIGNAL_FRAMESIZE;
@@ -1483,7 +1493,7 @@
 		printk_ratelimited(KERN_INFO
 				   "%s[%d]: bad frame in handle_signal32: "
 				   "%p nip %08lx lr %08lx\n",
-				   current->comm, current->pid,
+				   tsk->comm, tsk->pid,
 				   frame, regs->nip, regs->link);
 
 	return 1;
diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c
index 70409bb..96698fd 100644
--- a/arch/powerpc/kernel/signal_64.c
+++ b/arch/powerpc/kernel/signal_64.c
@@ -35,6 +35,7 @@
 #include <asm/vdso.h>
 #include <asm/switch_to.h>
 #include <asm/tm.h>
+#include <asm/asm-prototypes.h>
 
 #include "signal.h"
 
@@ -90,9 +91,9 @@
  * Set up the sigcontext for the signal frame.
  */
 
-static long setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs,
-		 int signr, sigset_t *set, unsigned long handler,
-		 int ctx_has_vsx_region)
+static long setup_sigcontext(struct sigcontext __user *sc,
+		struct task_struct *tsk, int signr, sigset_t *set,
+		unsigned long handler, int ctx_has_vsx_region)
 {
 	/* When CONFIG_ALTIVEC is set, we _always_ setup v_regs even if the
 	 * process never used altivec yet (MSR_VEC is zero in pt_regs of
@@ -106,17 +107,20 @@
 	elf_vrreg_t __user *v_regs = sigcontext_vmx_regs(sc);
 	unsigned long vrsave;
 #endif
+	struct pt_regs *regs = tsk->thread.regs;
 	unsigned long msr = regs->msr;
 	long err = 0;
 
+	BUG_ON(tsk != current);
+
 #ifdef CONFIG_ALTIVEC
 	err |= __put_user(v_regs, &sc->v_regs);
 
 	/* save altivec registers */
-	if (current->thread.used_vr) {
-		flush_altivec_to_thread(current);
+	if (tsk->thread.used_vr) {
+		flush_altivec_to_thread(tsk);
 		/* Copy 33 vec registers (vr0..31 and vscr) to the stack */
-		err |= __copy_to_user(v_regs, &current->thread.vr_state,
+		err |= __copy_to_user(v_regs, &tsk->thread.vr_state,
 				      33 * sizeof(vector128));
 		/* set MSR_VEC in the MSR value in the frame to indicate that sc->v_reg)
 		 * contains valid data.
@@ -129,16 +133,16 @@
 	vrsave = 0;
 	if (cpu_has_feature(CPU_FTR_ALTIVEC)) {
 		vrsave = mfspr(SPRN_VRSAVE);
-		current->thread.vrsave = vrsave;
+		tsk->thread.vrsave = vrsave;
 	}
 
 	err |= __put_user(vrsave, (u32 __user *)&v_regs[33]);
 #else /* CONFIG_ALTIVEC */
 	err |= __put_user(0, &sc->v_regs);
 #endif /* CONFIG_ALTIVEC */
-	flush_fp_to_thread(current);
+	flush_fp_to_thread(tsk);
 	/* copy fpr regs and fpscr */
-	err |= copy_fpr_to_user(&sc->fp_regs, current);
+	err |= copy_fpr_to_user(&sc->fp_regs, tsk);
 
 	/*
 	 * Clear the MSR VSX bit to indicate there is no valid state attached
@@ -151,10 +155,10 @@
 	 * then out to userspace.  Update v_regs to point after the
 	 * VMX data.
 	 */
-	if (current->thread.used_vsr && ctx_has_vsx_region) {
-		flush_vsx_to_thread(current);
+	if (tsk->thread.used_vsr && ctx_has_vsx_region) {
+		flush_vsx_to_thread(tsk);
 		v_regs += ELF_NVRREG;
-		err |= copy_vsx_to_user(v_regs, current);
+		err |= copy_vsx_to_user(v_regs, tsk);
 		/* set MSR_VSX in the MSR value in the frame to
 		 * indicate that sc->vs_reg) contains valid data.
 		 */
@@ -187,7 +191,7 @@
  */
 static long setup_tm_sigcontexts(struct sigcontext __user *sc,
 				 struct sigcontext __user *tm_sc,
-				 struct pt_regs *regs,
+				 struct task_struct *tsk,
 				 int signr, sigset_t *set, unsigned long handler)
 {
 	/* When CONFIG_ALTIVEC is set, we _always_ setup v_regs even if the
@@ -202,9 +206,12 @@
 	elf_vrreg_t __user *v_regs = sigcontext_vmx_regs(sc);
 	elf_vrreg_t __user *tm_v_regs = sigcontext_vmx_regs(tm_sc);
 #endif
-	unsigned long msr = regs->msr;
+	struct pt_regs *regs = tsk->thread.regs;
+	unsigned long msr = tsk->thread.ckpt_regs.msr;
 	long err = 0;
 
+	BUG_ON(tsk != current);
+
 	BUG_ON(!MSR_TM_ACTIVE(regs->msr));
 
 	/* Remove TM bits from thread's MSR.  The MSR in the sigcontext
@@ -214,28 +221,25 @@
 	 */
 	regs->msr &= ~MSR_TS_MASK;
 
-	flush_fp_to_thread(current);
-
 #ifdef CONFIG_ALTIVEC
 	err |= __put_user(v_regs, &sc->v_regs);
 	err |= __put_user(tm_v_regs, &tm_sc->v_regs);
 
 	/* save altivec registers */
-	if (current->thread.used_vr) {
-		flush_altivec_to_thread(current);
+	if (tsk->thread.used_vr) {
 		/* Copy 33 vec registers (vr0..31 and vscr) to the stack */
-		err |= __copy_to_user(v_regs, &current->thread.vr_state,
+		err |= __copy_to_user(v_regs, &tsk->thread.ckvr_state,
 				      33 * sizeof(vector128));
 		/* If VEC was enabled there are transactional VRs valid too,
 		 * else they're a copy of the checkpointed VRs.
 		 */
 		if (msr & MSR_VEC)
 			err |= __copy_to_user(tm_v_regs,
-					      &current->thread.transact_vr,
+					      &tsk->thread.vr_state,
 					      33 * sizeof(vector128));
 		else
 			err |= __copy_to_user(tm_v_regs,
-					      &current->thread.vr_state,
+					      &tsk->thread.ckvr_state,
 					      33 * sizeof(vector128));
 
 		/* set MSR_VEC in the MSR value in the frame to indicate
@@ -247,13 +251,13 @@
 	 * use altivec.
 	 */
 	if (cpu_has_feature(CPU_FTR_ALTIVEC))
-		current->thread.vrsave = mfspr(SPRN_VRSAVE);
-	err |= __put_user(current->thread.vrsave, (u32 __user *)&v_regs[33]);
+		tsk->thread.ckvrsave = mfspr(SPRN_VRSAVE);
+	err |= __put_user(tsk->thread.ckvrsave, (u32 __user *)&v_regs[33]);
 	if (msr & MSR_VEC)
-		err |= __put_user(current->thread.transact_vrsave,
+		err |= __put_user(tsk->thread.vrsave,
 				  (u32 __user *)&tm_v_regs[33]);
 	else
-		err |= __put_user(current->thread.vrsave,
+		err |= __put_user(tsk->thread.ckvrsave,
 				  (u32 __user *)&tm_v_regs[33]);
 
 #else /* CONFIG_ALTIVEC */
@@ -262,11 +266,11 @@
 #endif /* CONFIG_ALTIVEC */
 
 	/* copy fpr regs and fpscr */
-	err |= copy_fpr_to_user(&sc->fp_regs, current);
+	err |= copy_ckfpr_to_user(&sc->fp_regs, tsk);
 	if (msr & MSR_FP)
-		err |= copy_transact_fpr_to_user(&tm_sc->fp_regs, current);
+		err |= copy_fpr_to_user(&tm_sc->fp_regs, tsk);
 	else
-		err |= copy_fpr_to_user(&tm_sc->fp_regs, current);
+		err |= copy_ckfpr_to_user(&tm_sc->fp_regs, tsk);
 
 #ifdef CONFIG_VSX
 	/*
@@ -274,17 +278,16 @@
 	 * then out to userspace.  Update v_regs to point after the
 	 * VMX data.
 	 */
-	if (current->thread.used_vsr) {
-		flush_vsx_to_thread(current);
+	if (tsk->thread.used_vsr) {
 		v_regs += ELF_NVRREG;
 		tm_v_regs += ELF_NVRREG;
 
-		err |= copy_vsx_to_user(v_regs, current);
+		err |= copy_ckvsx_to_user(v_regs, tsk);
 
 		if (msr & MSR_VSX)
-			err |= copy_transact_vsx_to_user(tm_v_regs, current);
+			err |= copy_vsx_to_user(tm_v_regs, tsk);
 		else
-			err |= copy_vsx_to_user(tm_v_regs, current);
+			err |= copy_ckvsx_to_user(tm_v_regs, tsk);
 
 		/* set MSR_VSX in the MSR value in the frame to
 		 * indicate that sc->vs_reg) contains valid data.
@@ -298,7 +301,7 @@
 	WARN_ON(!FULL_REGS(regs));
 	err |= __copy_to_user(&tm_sc->gp_regs, regs, GP_REGS_SIZE);
 	err |= __copy_to_user(&sc->gp_regs,
-			      &current->thread.ckpt_regs, GP_REGS_SIZE);
+			      &tsk->thread.ckpt_regs, GP_REGS_SIZE);
 	err |= __put_user(msr, &tm_sc->gp_regs[PT_MSR]);
 	err |= __put_user(msr, &sc->gp_regs[PT_MSR]);
 	err |= __put_user(signr, &sc->signal);
@@ -314,7 +317,7 @@
  * Restore the sigcontext from the signal frame.
  */
 
-static long restore_sigcontext(struct pt_regs *regs, sigset_t *set, int sig,
+static long restore_sigcontext(struct task_struct *tsk, sigset_t *set, int sig,
 			      struct sigcontext __user *sc)
 {
 #ifdef CONFIG_ALTIVEC
@@ -323,10 +326,13 @@
 	unsigned long err = 0;
 	unsigned long save_r13 = 0;
 	unsigned long msr;
+	struct pt_regs *regs = tsk->thread.regs;
 #ifdef CONFIG_VSX
 	int i;
 #endif
 
+	BUG_ON(tsk != current);
+
 	/* If this is not a signal return, we preserve the TLS in r13 */
 	if (!sig)
 		save_r13 = regs->gpr[13];
@@ -356,7 +362,7 @@
 
 	/*
 	 * Force reload of FP/VEC.
-	 * This has to be done before copying stuff into current->thread.fpr/vr
+	 * This has to be done before copying stuff into tsk->thread.fpr/vr
 	 * for the reasons explained in the previous comment.
 	 */
 	regs->msr &= ~(MSR_FP | MSR_FE0 | MSR_FE1 | MSR_VEC | MSR_VSX);
@@ -368,21 +374,23 @@
 	if (v_regs && !access_ok(VERIFY_READ, v_regs, 34 * sizeof(vector128)))
 		return -EFAULT;
 	/* Copy 33 vec registers (vr0..31 and vscr) from the stack */
-	if (v_regs != NULL && (msr & MSR_VEC) != 0)
-		err |= __copy_from_user(&current->thread.vr_state, v_regs,
+	if (v_regs != NULL && (msr & MSR_VEC) != 0) {
+		err |= __copy_from_user(&tsk->thread.vr_state, v_regs,
 					33 * sizeof(vector128));
-	else if (current->thread.used_vr)
-		memset(&current->thread.vr_state, 0, 33 * sizeof(vector128));
+		tsk->thread.used_vr = true;
+	} else if (tsk->thread.used_vr) {
+		memset(&tsk->thread.vr_state, 0, 33 * sizeof(vector128));
+	}
 	/* Always get VRSAVE back */
 	if (v_regs != NULL)
-		err |= __get_user(current->thread.vrsave, (u32 __user *)&v_regs[33]);
+		err |= __get_user(tsk->thread.vrsave, (u32 __user *)&v_regs[33]);
 	else
-		current->thread.vrsave = 0;
+		tsk->thread.vrsave = 0;
 	if (cpu_has_feature(CPU_FTR_ALTIVEC))
-		mtspr(SPRN_VRSAVE, current->thread.vrsave);
+		mtspr(SPRN_VRSAVE, tsk->thread.vrsave);
 #endif /* CONFIG_ALTIVEC */
 	/* restore floating point */
-	err |= copy_fpr_from_user(current, &sc->fp_regs);
+	err |= copy_fpr_from_user(tsk, &sc->fp_regs);
 #ifdef CONFIG_VSX
 	/*
 	 * Get additional VSX data. Update v_regs to point after the
@@ -390,11 +398,13 @@
 	 * buffer for formatting, then into the taskstruct.
 	 */
 	v_regs += ELF_NVRREG;
-	if ((msr & MSR_VSX) != 0)
-		err |= copy_vsx_from_user(current, v_regs);
-	else
+	if ((msr & MSR_VSX) != 0) {
+		err |= copy_vsx_from_user(tsk, v_regs);
+		tsk->thread.used_vsr = true;
+	} else {
 		for (i = 0; i < 32 ; i++)
-			current->thread.fp_state.fpr[i][TS_VSRLOWOFFSET] = 0;
+			tsk->thread.fp_state.fpr[i][TS_VSRLOWOFFSET] = 0;
+	}
 #endif
 	return err;
 }
@@ -404,7 +414,7 @@
  * Restore the two sigcontexts from the frame of a transactional processes.
  */
 
-static long restore_tm_sigcontexts(struct pt_regs *regs,
+static long restore_tm_sigcontexts(struct task_struct *tsk,
 				   struct sigcontext __user *sc,
 				   struct sigcontext __user *tm_sc)
 {
@@ -413,12 +423,16 @@
 #endif
 	unsigned long err = 0;
 	unsigned long msr;
+	struct pt_regs *regs = tsk->thread.regs;
 #ifdef CONFIG_VSX
 	int i;
 #endif
+
+	BUG_ON(tsk != current);
+
 	/* copy the GPRs */
 	err |= __copy_from_user(regs->gpr, tm_sc->gp_regs, sizeof(regs->gpr));
-	err |= __copy_from_user(&current->thread.ckpt_regs, sc->gp_regs,
+	err |= __copy_from_user(&tsk->thread.ckpt_regs, sc->gp_regs,
 				sizeof(regs->gpr));
 
 	/*
@@ -430,7 +444,7 @@
 	 * we don't need to re-copy them here.
 	 */
 	err |= __get_user(regs->nip, &tm_sc->gp_regs[PT_NIP]);
-	err |= __get_user(current->thread.tm_tfhar, &sc->gp_regs[PT_NIP]);
+	err |= __get_user(tsk->thread.tm_tfhar, &sc->gp_regs[PT_NIP]);
 
 	/* get MSR separately, transfer the LE bit if doing signal return */
 	err |= __get_user(msr, &sc->gp_regs[PT_MSR]);
@@ -449,13 +463,13 @@
 	err |= __get_user(regs->link, &tm_sc->gp_regs[PT_LNK]);
 	err |= __get_user(regs->xer, &tm_sc->gp_regs[PT_XER]);
 	err |= __get_user(regs->ccr, &tm_sc->gp_regs[PT_CCR]);
-	err |= __get_user(current->thread.ckpt_regs.ctr,
+	err |= __get_user(tsk->thread.ckpt_regs.ctr,
 			  &sc->gp_regs[PT_CTR]);
-	err |= __get_user(current->thread.ckpt_regs.link,
+	err |= __get_user(tsk->thread.ckpt_regs.link,
 			  &sc->gp_regs[PT_LNK]);
-	err |= __get_user(current->thread.ckpt_regs.xer,
+	err |= __get_user(tsk->thread.ckpt_regs.xer,
 			  &sc->gp_regs[PT_XER]);
-	err |= __get_user(current->thread.ckpt_regs.ccr,
+	err |= __get_user(tsk->thread.ckpt_regs.ccr,
 			  &sc->gp_regs[PT_CCR]);
 
 	/* These regs are not checkpointed; they can go in 'regs'. */
@@ -466,7 +480,7 @@
 
 	/*
 	 * Force reload of FP/VEC.
-	 * This has to be done before copying stuff into current->thread.fpr/vr
+	 * This has to be done before copying stuff into tsk->thread.fpr/vr
 	 * for the reasons explained in the previous comment.
 	 */
 	regs->msr &= ~(MSR_FP | MSR_FE0 | MSR_FE1 | MSR_VEC | MSR_VSX);
@@ -483,32 +497,33 @@
 		return -EFAULT;
 	/* Copy 33 vec registers (vr0..31 and vscr) from the stack */
 	if (v_regs != NULL && tm_v_regs != NULL && (msr & MSR_VEC) != 0) {
-		err |= __copy_from_user(&current->thread.vr_state, v_regs,
+		err |= __copy_from_user(&tsk->thread.ckvr_state, v_regs,
 					33 * sizeof(vector128));
-		err |= __copy_from_user(&current->thread.transact_vr, tm_v_regs,
+		err |= __copy_from_user(&tsk->thread.vr_state, tm_v_regs,
 					33 * sizeof(vector128));
+		current->thread.used_vr = true;
 	}
-	else if (current->thread.used_vr) {
-		memset(&current->thread.vr_state, 0, 33 * sizeof(vector128));
-		memset(&current->thread.transact_vr, 0, 33 * sizeof(vector128));
+	else if (tsk->thread.used_vr) {
+		memset(&tsk->thread.vr_state, 0, 33 * sizeof(vector128));
+		memset(&tsk->thread.ckvr_state, 0, 33 * sizeof(vector128));
 	}
 	/* Always get VRSAVE back */
 	if (v_regs != NULL && tm_v_regs != NULL) {
-		err |= __get_user(current->thread.vrsave,
+		err |= __get_user(tsk->thread.ckvrsave,
 				  (u32 __user *)&v_regs[33]);
-		err |= __get_user(current->thread.transact_vrsave,
+		err |= __get_user(tsk->thread.vrsave,
 				  (u32 __user *)&tm_v_regs[33]);
 	}
 	else {
-		current->thread.vrsave = 0;
-		current->thread.transact_vrsave = 0;
+		tsk->thread.vrsave = 0;
+		tsk->thread.ckvrsave = 0;
 	}
 	if (cpu_has_feature(CPU_FTR_ALTIVEC))
-		mtspr(SPRN_VRSAVE, current->thread.vrsave);
+		mtspr(SPRN_VRSAVE, tsk->thread.vrsave);
 #endif /* CONFIG_ALTIVEC */
 	/* restore floating point */
-	err |= copy_fpr_from_user(current, &sc->fp_regs);
-	err |= copy_transact_fpr_from_user(current, &tm_sc->fp_regs);
+	err |= copy_fpr_from_user(tsk, &tm_sc->fp_regs);
+	err |= copy_ckfpr_from_user(tsk, &sc->fp_regs);
 #ifdef CONFIG_VSX
 	/*
 	 * Get additional VSX data. Update v_regs to point after the
@@ -518,32 +533,31 @@
 	if (v_regs && ((msr & MSR_VSX) != 0)) {
 		v_regs += ELF_NVRREG;
 		tm_v_regs += ELF_NVRREG;
-		err |= copy_vsx_from_user(current, v_regs);
-		err |= copy_transact_vsx_from_user(current, tm_v_regs);
+		err |= copy_vsx_from_user(tsk, tm_v_regs);
+		err |= copy_ckvsx_from_user(tsk, v_regs);
+		tsk->thread.used_vsr = true;
 	} else {
 		for (i = 0; i < 32 ; i++) {
-			current->thread.fp_state.fpr[i][TS_VSRLOWOFFSET] = 0;
-			current->thread.transact_fp.fpr[i][TS_VSRLOWOFFSET] = 0;
+			tsk->thread.fp_state.fpr[i][TS_VSRLOWOFFSET] = 0;
+			tsk->thread.ckfp_state.fpr[i][TS_VSRLOWOFFSET] = 0;
 		}
 	}
 #endif
 	tm_enable();
 	/* Make sure the transaction is marked as failed */
-	current->thread.tm_texasr |= TEXASR_FS;
+	tsk->thread.tm_texasr |= TEXASR_FS;
 	/* This loads the checkpointed FP/VEC state, if used */
-	tm_recheckpoint(&current->thread, msr);
+	tm_recheckpoint(&tsk->thread, msr);
 
-	/* This loads the speculative FP/VEC state, if used */
+	msr_check_and_set(msr & (MSR_FP | MSR_VEC));
 	if (msr & MSR_FP) {
-		do_load_up_transact_fpu(&current->thread);
-		regs->msr |= (MSR_FP | current->thread.fpexc_mode);
+		load_fp_state(&tsk->thread.fp_state);
+		regs->msr |= (MSR_FP | tsk->thread.fpexc_mode);
 	}
-#ifdef CONFIG_ALTIVEC
 	if (msr & MSR_VEC) {
-		do_load_up_transact_altivec(&current->thread);
+		load_vr_state(&tsk->thread.vr_state);
 		regs->msr |= MSR_VEC;
 	}
-#endif
 
 	return err;
 }
@@ -594,6 +608,8 @@
 	unsigned long new_msr = 0;
 	int ctx_has_vsx_region = 0;
 
+	BUG_ON(regs != current->thread.regs);
+
 	if (new_ctx &&
 	    get_user(new_msr, &new_ctx->uc_mcontext.gp_regs[PT_MSR]))
 		return -EFAULT;
@@ -616,7 +632,7 @@
 
 	if (old_ctx != NULL) {
 		if (!access_ok(VERIFY_WRITE, old_ctx, ctx_size)
-		    || setup_sigcontext(&old_ctx->uc_mcontext, regs, 0, NULL, 0,
+		    || setup_sigcontext(&old_ctx->uc_mcontext, current, 0, NULL, 0,
 					ctx_has_vsx_region)
 		    || __copy_to_user(&old_ctx->uc_sigmask,
 				      &current->blocked, sizeof(sigset_t)))
@@ -644,7 +660,7 @@
 	if (__copy_from_user(&set, &new_ctx->uc_sigmask, sizeof(set)))
 		do_exit(SIGSEGV);
 	set_current_blocked(&set);
-	if (restore_sigcontext(regs, NULL, 0, &new_ctx->uc_mcontext))
+	if (restore_sigcontext(current, NULL, 0, &new_ctx->uc_mcontext))
 		do_exit(SIGSEGV);
 
 	/* This returns like rt_sigreturn */
@@ -667,6 +683,8 @@
 	unsigned long msr;
 #endif
 
+	BUG_ON(current->thread.regs != regs);
+
 	/* Always make any pending restarted system calls return -EINTR */
 	current->restart_block.fn = do_no_restart_syscall;
 
@@ -698,14 +716,14 @@
 		struct ucontext __user *uc_transact;
 		if (__get_user(uc_transact, &uc->uc_link))
 			goto badframe;
-		if (restore_tm_sigcontexts(regs, &uc->uc_mcontext,
+		if (restore_tm_sigcontexts(current, &uc->uc_mcontext,
 					   &uc_transact->uc_mcontext))
 			goto badframe;
 	}
 	else
 	/* Fall through, for non-TM restore */
 #endif
-	if (restore_sigcontext(regs, NULL, 1, &uc->uc_mcontext))
+	if (restore_sigcontext(current, NULL, 1, &uc->uc_mcontext))
 		goto badframe;
 
 	if (restore_altstack(&uc->uc_stack))
@@ -724,13 +742,17 @@
 	return 0;
 }
 
-int handle_rt_signal64(struct ksignal *ksig, sigset_t *set, struct pt_regs *regs)
+int handle_rt_signal64(struct ksignal *ksig, sigset_t *set,
+		struct task_struct *tsk)
 {
 	struct rt_sigframe __user *frame;
 	unsigned long newsp = 0;
 	long err = 0;
+	struct pt_regs *regs = tsk->thread.regs;
 
-	frame = get_sigframe(ksig, get_tm_stackpointer(regs), sizeof(*frame), 0);
+	BUG_ON(tsk != current);
+
+	frame = get_sigframe(ksig, get_tm_stackpointer(tsk), sizeof(*frame), 0);
 	if (unlikely(frame == NULL))
 		goto badframe;
 
@@ -751,14 +773,13 @@
 		err |= __put_user(&frame->uc_transact, &frame->uc.uc_link);
 		err |= setup_tm_sigcontexts(&frame->uc.uc_mcontext,
 					    &frame->uc_transact.uc_mcontext,
-					    regs, ksig->sig,
-					    NULL,
+					    tsk, ksig->sig, NULL,
 					    (unsigned long)ksig->ka.sa.sa_handler);
 	} else
 #endif
 	{
 		err |= __put_user(0, &frame->uc.uc_link);
-		err |= setup_sigcontext(&frame->uc.uc_mcontext, regs, ksig->sig,
+		err |= setup_sigcontext(&frame->uc.uc_mcontext, tsk, ksig->sig,
 					NULL, (unsigned long)ksig->ka.sa.sa_handler,
 					1);
 	}
@@ -767,11 +788,11 @@
 		goto badframe;
 
 	/* Make sure signal handler doesn't get spurious FP exceptions */
-	current->thread.fp_state.fpscr = 0;
+	tsk->thread.fp_state.fpscr = 0;
 
 	/* Set up to return from userspace. */
-	if (vdso64_rt_sigtramp && current->mm->context.vdso_base) {
-		regs->link = current->mm->context.vdso_base + vdso64_rt_sigtramp;
+	if (vdso64_rt_sigtramp && tsk->mm->context.vdso_base) {
+		regs->link = tsk->mm->context.vdso_base + vdso64_rt_sigtramp;
 	} else {
 		err |= setup_trampoline(__NR_rt_sigreturn, &frame->tramp[0]);
 		if (err)
@@ -821,7 +842,7 @@
 badframe:
 	if (show_unhandled_signals)
 		printk_ratelimited(regs->msr & MSR_64BIT ? fmt64 : fmt32,
-				   current->comm, current->pid, "setup_rt_frame",
+				   tsk->comm, tsk->pid, "setup_rt_frame",
 				   (long)frame, regs->nip, regs->link);
 
 	return 1;
diff --git a/arch/powerpc/kernel/syscalls.c b/arch/powerpc/kernel/syscalls.c
index 5fa9270..644cce3 100644
--- a/arch/powerpc/kernel/syscalls.c
+++ b/arch/powerpc/kernel/syscalls.c
@@ -40,6 +40,7 @@
 #include <asm/syscalls.h>
 #include <asm/time.h>
 #include <asm/unistd.h>
+#include <asm/asm-prototypes.h>
 
 static inline unsigned long do_mmap2(unsigned long addr, size_t len,
 			unsigned long prot, unsigned long flags,
diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index 3efbede..67859b7 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -73,6 +73,7 @@
 #include <asm/vdso_datapage.h>
 #include <asm/firmware.h>
 #include <asm/cputime.h>
+#include <asm/asm-prototypes.h>
 
 /* powerpc clocksource/clockevent code */
 
diff --git a/arch/powerpc/kernel/tm.S b/arch/powerpc/kernel/tm.S
index 298afcf..3a2d041 100644
--- a/arch/powerpc/kernel/tm.S
+++ b/arch/powerpc/kernel/tm.S
@@ -108,6 +108,7 @@
 	/* We've a struct pt_regs at [r1+STACK_FRAME_OVERHEAD]. */
 
 	std	r3, STK_PARAM(R3)(r1)
+	std	r4, STK_PARAM(R4)(r1)
 	SAVE_NVGPRS(r1)
 
 	/* We need to setup MSR for VSX register save instructions. */
@@ -126,43 +127,6 @@
 	mtmsrd	r15
 	std	r14, TM_FRAME_L0(r1)
 
-	/* Stash the stack pointer away for use after reclaim */
-	std	r1, PACAR1(r13)
-
-	/* ******************** FPR/VR/VSRs ************
-	 * Before reclaiming, capture the current/transactional FPR/VR
-	* versions /if used/.
-	 *
-	 * (If VSX used, FP and VMX are implied.  Or, we don't need to look
-	 * at MSR.VSX as copying FP regs if .FP, vector regs if .VMX covers it.)
-	 *
-	 * We're passed the thread's MSR as parameter 2.
-	 *
-	 * We enabled VEC/FP/VSX in the msr above, so we can execute these
-	 * instructions!
-	 */
-	andis.		r0, r4, MSR_VEC@h
-	beq	dont_backup_vec
-
-	addi	r7, r3, THREAD_TRANSACT_VRSTATE
-	SAVE_32VRS(0, r6, r7)	/* r6 scratch, r7 transact vr state */
-	mfvscr	v0
-	li	r6, VRSTATE_VSCR
-	stvx	v0, r7, r6
-dont_backup_vec:
-	mfspr	r0, SPRN_VRSAVE
-	std	r0, THREAD_TRANSACT_VRSAVE(r3)
-
-	andi.	r0, r4, MSR_FP
-	beq	dont_backup_fp
-
-	addi	r7, r3, THREAD_TRANSACT_FPSTATE
-	SAVE_32FPRS_VSRS(0, R6, R7)	/* r6 scratch, r7 transact fp state */
-
-	mffs    fr0
-	stfd    fr0,FPSTATE_FPSCR(r7)
-
-dont_backup_fp:
 	/* Do sanity check on MSR to make sure we are suspended */
 	li	r7, (MSR_TS_S)@higher
 	srdi	r6, r14, 32
@@ -170,6 +134,9 @@
 1:	tdeqi   r6, 0
 	EMIT_BUG_ENTRY 1b,__FILE__,__LINE__,0
 
+	/* Stash the stack pointer away for use after reclaim */
+	std	r1, PACAR1(r13)
+
 	/* Clear MSR RI since we are about to change r1, EE is already off. */
 	li	r4, 0
 	mtmsrd	r4, 1
@@ -273,6 +240,43 @@
 	 * MSR.
 	 */
 
+
+	/* ******************** FPR/VR/VSRs ************
+	 * After reclaiming, capture the checkpointed FPRs/VRs /if used/.
+	 *
+	 * (If VSX used, FP and VMX are implied.  Or, we don't need to look
+	 * at MSR.VSX as copying FP regs if .FP, vector regs if .VMX covers it.)
+	 *
+	 * We're passed the thread's MSR as the second parameter
+	 *
+	 * We enabled VEC/FP/VSX in the msr above, so we can execute these
+	 * instructions!
+	 */
+	ld	r4, STK_PARAM(R4)(r1)		/* Second parameter, MSR * */
+	mr	r3, r12
+	andis.		r0, r4, MSR_VEC@h
+	beq	dont_backup_vec
+
+	addi	r7, r3, THREAD_CKVRSTATE
+	SAVE_32VRS(0, r6, r7)	/* r6 scratch, r7 transact vr state */
+	mfvscr	v0
+	li	r6, VRSTATE_VSCR
+	stvx	v0, r7, r6
+dont_backup_vec:
+	mfspr	r0, SPRN_VRSAVE
+	std	r0, THREAD_CKVRSAVE(r3)
+
+	andi.	r0, r4, MSR_FP
+	beq	dont_backup_fp
+
+	addi	r7, r3, THREAD_CKFPSTATE
+	SAVE_32FPRS_VSRS(0, R6, R7)	/* r6 scratch, r7 transact fp state */
+
+	mffs    fr0
+	stfd    fr0,FPSTATE_FPSCR(r7)
+
+dont_backup_fp:
+
 	/* TM regs, incl TEXASR -- these live in thread_struct.  Note they've
 	 * been updated by the treclaim, to explain to userland the failure
 	 * cause (aborted).
@@ -288,6 +292,7 @@
 
 	/* Restore original MSR/IRQ state & clear TM mode */
 	ld	r14, TM_FRAME_L0(r1)		/* Orig MSR */
+
 	li	r15, 0
 	rldimi  r14, r15, MSR_TS_LG, (63-MSR_TS_LG)-1
 	mtmsrd  r14
@@ -356,28 +361,29 @@
 	mtmsr	r5
 
 #ifdef CONFIG_ALTIVEC
-	/* FP and VEC registers:  These are recheckpointed from thread.fpr[]
-	 * and thread.vr[] respectively.  The thread.transact_fpr[] version
-	 * is more modern, and will be loaded subsequently by any FPUnavailable
-	 * trap.
+	/*
+	 * FP and VEC registers: These are recheckpointed from
+	 * thread.ckfp_state and thread.ckvr_state respectively. The
+	 * thread.fp_state[] version holds the 'live' (transactional)
+	 * and will be loaded subsequently by any FPUnavailable trap.
 	 */
 	andis.	r0, r4, MSR_VEC@h
 	beq	dont_restore_vec
 
-	addi	r8, r3, THREAD_VRSTATE
+	addi	r8, r3, THREAD_CKVRSTATE
 	li	r5, VRSTATE_VSCR
 	lvx	v0, r8, r5
 	mtvscr	v0
 	REST_32VRS(0, r5, r8)			/* r5 scratch, r8 ptr */
 dont_restore_vec:
-	ld	r5, THREAD_VRSAVE(r3)
+	ld	r5, THREAD_CKVRSAVE(r3)
 	mtspr	SPRN_VRSAVE, r5
 #endif
 
 	andi.	r0, r4, MSR_FP
 	beq	dont_restore_fp
 
-	addi	r8, r3, THREAD_FPSTATE
+	addi	r8, r3, THREAD_CKFPSTATE
 	lfd	fr0, FPSTATE_FPSCR(r8)
 	MTFSF_L(fr0)
 	REST_32FPRS_VSRS(0, R4, R8)
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index 62859eb..a1f8f56 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -117,7 +117,7 @@
 static unsigned int die_nest_count;
 static int die_counter;
 
-static unsigned __kprobes long oops_begin(struct pt_regs *regs)
+static unsigned long oops_begin(struct pt_regs *regs)
 {
 	int cpu;
 	unsigned long flags;
@@ -144,8 +144,9 @@
 		pmac_backlight_unblank();
 	return flags;
 }
+NOKPROBE_SYMBOL(oops_begin);
 
-static void __kprobes oops_end(unsigned long flags, struct pt_regs *regs,
+static void oops_end(unsigned long flags, struct pt_regs *regs,
 			       int signr)
 {
 	bust_spinlocks(0);
@@ -196,8 +197,9 @@
 		panic("Fatal exception");
 	do_exit(signr);
 }
+NOKPROBE_SYMBOL(oops_end);
 
-static int __kprobes __die(const char *str, struct pt_regs *regs, long err)
+static int __die(const char *str, struct pt_regs *regs, long err)
 {
 	printk("Oops: %s, sig: %ld [#%d]\n", str, err, ++die_counter);
 #ifdef CONFIG_PREEMPT
@@ -221,6 +223,7 @@
 
 	return 0;
 }
+NOKPROBE_SYMBOL(__die);
 
 void die(const char *str, struct pt_regs *regs, long err)
 {
@@ -802,7 +805,7 @@
 	_exception(SIGTRAP, regs, 0, 0);
 }
 
-void __kprobes single_step_exception(struct pt_regs *regs)
+void single_step_exception(struct pt_regs *regs)
 {
 	enum ctx_state prev_state = exception_enter();
 
@@ -819,6 +822,7 @@
 bail:
 	exception_exit(prev_state);
 }
+NOKPROBE_SYMBOL(single_step_exception);
 
 /*
  * After we have successfully emulated an instruction, we have to
@@ -1140,7 +1144,7 @@
 static inline int emulate_math(struct pt_regs *regs) { return -1; }
 #endif
 
-void __kprobes program_check_exception(struct pt_regs *regs)
+void program_check_exception(struct pt_regs *regs)
 {
 	enum ctx_state prev_state = exception_enter();
 	unsigned int reason = get_reason(regs);
@@ -1260,16 +1264,18 @@
 bail:
 	exception_exit(prev_state);
 }
+NOKPROBE_SYMBOL(program_check_exception);
 
 /*
  * This occurs when running in hypervisor mode on POWER6 or later
  * and an illegal instruction is encountered.
  */
-void __kprobes emulation_assist_interrupt(struct pt_regs *regs)
+void emulation_assist_interrupt(struct pt_regs *regs)
 {
 	regs->msr |= REASON_ILLEGAL;
 	program_check_exception(regs);
 }
+NOKPROBE_SYMBOL(emulation_assist_interrupt);
 
 void alignment_exception(struct pt_regs *regs)
 {
@@ -1310,6 +1316,18 @@
 	exception_exit(prev_state);
 }
 
+void slb_miss_bad_addr(struct pt_regs *regs)
+{
+	enum ctx_state prev_state = exception_enter();
+
+	if (user_mode(regs))
+		_exception(SIGSEGV, regs, SEGV_BNDERR, regs->dar);
+	else
+		bad_page_fault(regs, regs->dar, SIGSEGV);
+
+	exception_exit(prev_state);
+}
+
 void StackOverflow(struct pt_regs *regs)
 {
 	printk(KERN_CRIT "Kernel stack overflow in process %p, r1=%lx\n",
@@ -1372,6 +1390,22 @@
 }
 
 #ifdef CONFIG_PPC64
+static void tm_unavailable(struct pt_regs *regs)
+{
+#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
+	if (user_mode(regs)) {
+		current->thread.load_tm++;
+		regs->msr |= MSR_TM;
+		tm_enable();
+		tm_restore_sprs(&current->thread);
+		return;
+	}
+#endif
+	pr_emerg("Unrecoverable TM Unavailable Exception "
+			"%lx at %lx\n", regs->trap, regs->nip);
+	die("Unrecoverable TM Unavailable Exception", regs, SIGABRT);
+}
+
 void facility_unavailable_exception(struct pt_regs *regs)
 {
 	static char *facility_strings[] = {
@@ -1451,6 +1485,27 @@
 		return;
 	}
 
+	if (status == FSCR_TM_LG) {
+		/*
+		 * If we're here then the hardware is TM aware because it
+		 * generated an exception with FSRM_TM set.
+		 *
+		 * If cpu_has_feature(CPU_FTR_TM) is false, then either firmware
+		 * told us not to do TM, or the kernel is not built with TM
+		 * support.
+		 *
+		 * If both of those things are true, then userspace can spam the
+		 * console by triggering the printk() below just by continually
+		 * doing tbegin (or any TM instruction). So in that case just
+		 * send the process a SIGILL immediately.
+		 */
+		if (!cpu_has_feature(CPU_FTR_TM))
+			goto out;
+
+		tm_unavailable(regs);
+		return;
+	}
+
 	if ((status < ARRAY_SIZE(facility_strings)) &&
 	    facility_strings[status])
 		facility = facility_strings[status];
@@ -1463,6 +1518,7 @@
 		"%sFacility '%s' unavailable, exception at 0x%lx, MSR=%lx\n",
 		hv ? "Hypervisor " : "", facility, regs->nip, regs->msr);
 
+out:
 	if (user_mode(regs)) {
 		_exception(SIGILL, regs, ILL_ILLOPC, regs->nip);
 		return;
@@ -1504,7 +1560,8 @@
 
 	/* If VMX is in use, get the transactional values back */
 	if (regs->msr & MSR_VEC) {
-		do_load_up_transact_altivec(&current->thread);
+		msr_check_and_set(MSR_VEC);
+		load_vr_state(&current->thread.vr_state);
 		/* At this point all the VSX state is loaded, so enable it */
 		regs->msr |= MSR_VSX;
 	}
@@ -1525,7 +1582,8 @@
 	current->thread.used_vr = 1;
 
 	if (regs->msr & MSR_FP) {
-		do_load_up_transact_fpu(&current->thread);
+		msr_check_and_set(MSR_FP);
+		load_fp_state(&current->thread.fp_state);
 		regs->msr |= MSR_VSX;
 	}
 }
@@ -1564,10 +1622,12 @@
 	 */
 	tm_recheckpoint(&current->thread, regs->msr & ~orig_msr);
 
+	msr_check_and_set(orig_msr & (MSR_FP | MSR_VEC));
+
 	if (orig_msr & MSR_FP)
-		do_load_up_transact_fpu(&current->thread);
+		load_fp_state(&current->thread.fp_state);
 	if (orig_msr & MSR_VEC)
-		do_load_up_transact_altivec(&current->thread);
+		load_vr_state(&current->thread.vr_state);
 }
 #endif /* CONFIG_PPC_TRANSACTIONAL_MEM */
 
@@ -1656,7 +1716,7 @@
 		mtspr(SPRN_DBCR0, current->thread.debug.dbcr0);
 }
 
-void __kprobes DebugException(struct pt_regs *regs, unsigned long debug_status)
+void DebugException(struct pt_regs *regs, unsigned long debug_status)
 {
 	current->thread.debug.dbsr = debug_status;
 
@@ -1717,6 +1777,7 @@
 	} else
 		handle_debug(regs, debug_status);
 }
+NOKPROBE_SYMBOL(DebugException);
 #endif /* CONFIG_PPC_ADV_DEBUG_REGS */
 
 #if !defined(CONFIG_TAU_INT)
diff --git a/arch/powerpc/kernel/vdso64/Makefile b/arch/powerpc/kernel/vdso64/Makefile
index 366ae09..31107bf 100644
--- a/arch/powerpc/kernel/vdso64/Makefile
+++ b/arch/powerpc/kernel/vdso64/Makefile
@@ -31,15 +31,9 @@
 $(obj)/%.so: $(obj)/%.so.dbg FORCE
 	$(call if_changed,objcopy)
 
-# assembly rules for the .S files
-$(obj-vdso64): %.o: %.S FORCE
-	$(call if_changed_dep,vdso64as)
-
 # actual build commands
 quiet_cmd_vdso64ld = VDSO64L $@
       cmd_vdso64ld = $(CC) $(c_flags) -o $@ -Wl,-T$(filter %.lds,$^) $(filter %.o,$^)
-quiet_cmd_vdso64as = VDSO64A $@
-      cmd_vdso64as = $(CC) $(a_flags) -c -o $@ $<
 
 # install commands for the unstripped file
 quiet_cmd_vdso_install = INSTALL $@
diff --git a/arch/powerpc/kernel/vdso64/datapage.S b/arch/powerpc/kernel/vdso64/datapage.S
index 184a6ba..abf17fe 100644
--- a/arch/powerpc/kernel/vdso64/datapage.S
+++ b/arch/powerpc/kernel/vdso64/datapage.S
@@ -59,7 +59,7 @@
 	bl	V_LOCAL_FUNC(__get_datapage)
 	mtlr	r12
 	addi	r3,r3,CFG_SYSCALL_MAP64
-	cmpli	cr0,r4,0
+	cmpldi	cr0,r4,0
 	crclr	cr0*4+so
 	beqlr
 	li	r0,NR_syscalls
diff --git a/arch/powerpc/kernel/vdso64/gettimeofday.S b/arch/powerpc/kernel/vdso64/gettimeofday.S
index a76b4af..3820213 100644
--- a/arch/powerpc/kernel/vdso64/gettimeofday.S
+++ b/arch/powerpc/kernel/vdso64/gettimeofday.S
@@ -145,7 +145,7 @@
 	bne	cr0,99f
 
 	li	r3,0
-	cmpli	cr0,r4,0
+	cmpldi	cr0,r4,0
 	crclr	cr0*4+so
 	beqlr
 	lis	r5,CLOCK_REALTIME_RES@h
diff --git a/arch/powerpc/kernel/vector.S b/arch/powerpc/kernel/vector.S
index 616a6d8..bc85bdf 100644
--- a/arch/powerpc/kernel/vector.S
+++ b/arch/powerpc/kernel/vector.S
@@ -7,31 +7,6 @@
 #include <asm/page.h>
 #include <asm/ptrace.h>
 
-#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
-/* void do_load_up_transact_altivec(struct thread_struct *thread)
- *
- * This is similar to load_up_altivec but for the transactional version of the
- * vector regs.  It doesn't mess with the task MSR or valid flags.
- * Furthermore, VEC laziness is not supported with TM currently.
- */
-_GLOBAL(do_load_up_transact_altivec)
-	mfmsr	r6
-	oris	r5,r6,MSR_VEC@h
-	MTMSRD(r5)
-	isync
-
-	li	r4,1
-	stw	r4,THREAD_USED_VR(r3)
-
-	li	r10,THREAD_TRANSACT_VRSTATE+VRSTATE_VSCR
-	lvx	v0,r10,r3
-	mtvscr	v0
-	addi	r10,r3,THREAD_TRANSACT_VRSTATE
-	REST_32VRS(0,r4,r10)
-
-	blr
-#endif
-
 /*
  * Load state from memory into VMX registers including VSCR.
  * Assumes the caller has enabled VMX in the MSR.
diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S
index 7ed59f0..8295f51 100644
--- a/arch/powerpc/kernel/vmlinux.lds.S
+++ b/arch/powerpc/kernel/vmlinux.lds.S
@@ -44,11 +44,58 @@
  * Text, read only data and other permanent read-only sections
  */
 
-	/* Text and gots */
+	_text = .;
+	_stext = .;
+
+	/*
+	 * Head text.
+	 * This needs to be in its own output section to avoid ld placing
+	 * branch trampoline stubs randomly throughout the fixed sections,
+	 * which it will do (even if the branch comes from another section)
+	 * in order to optimize stub generation.
+	 */
+	.head.text : AT(ADDR(.head.text) - LOAD_OFFSET) {
+#ifdef CONFIG_PPC64
+		KEEP(*(.head.text.first_256B));
+#ifdef CONFIG_PPC_BOOK3E
+# define END_FIXED	0x100
+#else
+		KEEP(*(.head.text.real_vectors));
+		*(.head.text.real_trampolines);
+		KEEP(*(.head.text.virt_vectors));
+		*(.head.text.virt_trampolines);
+# if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV)
+		KEEP(*(.head.data.fwnmi_page));
+#  define END_FIXED	0x8000
+# else
+#  define END_FIXED	0x7000
+# endif
+#endif
+		ASSERT((. == END_FIXED), "vmlinux.lds.S: fixed section overflow error");
+#else /* !CONFIG_PPC64 */
+		HEAD_TEXT
+#endif
+	} :kernel
+
+	/*
+	 * If the build dies here, it's likely code in head_64.S is referencing
+	 * labels it can't reach, and the linker inserting stubs without the
+	 * assembler's knowledge. To debug, remove the above assert and
+	 * rebuild. Look for branch stubs in the fixed section region.
+	 *
+	 * Linker stub generation could be allowed in "trampoline"
+	 * sections if absolutely necessary, but this would require
+	 * some rework of the fixed sections. Before resorting to this,
+	 * consider references that have sufficient addressing range,
+	 * (e.g., hand coded trampolines) so the linker does not have
+	 * to add stubs.
+	 *
+	 * Linker stubs at the top of the main text section are currently not
+	 * detected, and will result in a crash at boot due to offsets being
+	 * wrong.
+	 */
 	.text : AT(ADDR(.text) - LOAD_OFFSET) {
 		ALIGN_FUNCTION();
-		HEAD_TEXT
-		_text = .;
 		/* careful! __ftr_alt_* sections need to be close to .text */
 		*(.text .fixup __ftr_alt_* .ref.text)
 		SCHED_TEXT
@@ -57,6 +104,8 @@
 		KPROBES_TEXT
 		IRQENTRY_TEXT
 		SOFTIRQENTRY_TEXT
+		MEM_KEEP(init.text)
+		MEM_KEEP(exit.text)
 
 #ifdef CONFIG_PPC32
 		*(.got1)
diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile
index ba21be1..ad52900 100644
--- a/arch/powerpc/lib/Makefile
+++ b/arch/powerpc/lib/Makefile
@@ -22,7 +22,7 @@
 obj64-$(CONFIG_ALTIVEC)	+= vmx-helper.o
 
 ifeq ($(CONFIG_GENERIC_CSUM),)
-obj-y			+= checksum_$(CONFIG_WORD_SIZE).o checksum_wrappers.o
+obj-y			+= checksum_$(BITS).o checksum_wrappers.o
 endif
 
 obj-$(CONFIG_PPC_EMULATE_SSTEP)	+= sstep.o ldstfp.o
diff --git a/arch/powerpc/lib/mem_64.S b/arch/powerpc/lib/mem_64.S
index 43435c6..eda7a96 100644
--- a/arch/powerpc/lib/mem_64.S
+++ b/arch/powerpc/lib/mem_64.S
@@ -37,6 +37,7 @@
 	clrldi	r5,r5,58
 	mtctr	r0
 	beq	5f
+	.balign 16
 4:	std	r4,0(r6)
 	std	r4,8(r6)
 	std	r4,16(r6)
@@ -90,6 +91,7 @@
 	andi.	r0,r6,3
 	mtctr	r7
 	bne	5f
+	.balign 16
 1:	lwz	r7,-4(r4)
 	lwzu	r8,-8(r4)
 	stw	r7,-4(r6)
diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile
index f2cea6d..1a4e570 100644
--- a/arch/powerpc/mm/Makefile
+++ b/arch/powerpc/mm/Makefile
@@ -7,17 +7,16 @@
 ccflags-$(CONFIG_PPC64)	:= $(NO_MINIMAL_TOC)
 
 obj-y				:= fault.o mem.o pgtable.o mmap.o \
-				   init_$(CONFIG_WORD_SIZE).o \
-				   pgtable_$(CONFIG_WORD_SIZE).o
+				   init_$(BITS).o pgtable_$(BITS).o
 obj-$(CONFIG_PPC_MMU_NOHASH)	+= mmu_context_nohash.o tlb_nohash.o \
 				   tlb_nohash_low.o
-obj-$(CONFIG_PPC_BOOK3E)	+= tlb_low_$(CONFIG_WORD_SIZE)e.o
+obj-$(CONFIG_PPC_BOOK3E)	+= tlb_low_$(BITS)e.o
 hash64-$(CONFIG_PPC_NATIVE)	:= hash_native_64.o
 obj-$(CONFIG_PPC_BOOK3E_64)   += pgtable-book3e.o
 obj-$(CONFIG_PPC_STD_MMU_64)	+= pgtable-hash64.o hash_utils_64.o slb_low.o slb.o $(hash64-y) mmu_context_book3s64.o pgtable-book3s64.o
 obj-$(CONFIG_PPC_RADIX_MMU)	+= pgtable-radix.o tlb-radix.o
 obj-$(CONFIG_PPC_STD_MMU_32)	+= ppc_mmu_32.o hash_low_32.o mmu_context_hash32.o
-obj-$(CONFIG_PPC_STD_MMU)	+= tlb_hash$(CONFIG_WORD_SIZE).o
+obj-$(CONFIG_PPC_STD_MMU)	+= tlb_hash$(BITS).o
 ifeq ($(CONFIG_PPC_STD_MMU_64),y)
 obj-$(CONFIG_PPC_4K_PAGES)	+= hash64_4k.o
 obj-$(CONFIG_PPC_64K_PAGES)	+= hash64_64k.o
diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c
index bb1ffc5..d0b137d 100644
--- a/arch/powerpc/mm/fault.c
+++ b/arch/powerpc/mm/fault.c
@@ -205,7 +205,7 @@
  * The return value is 0 if the fault was handled, or the signal
  * number if this is a kernel fault that can't be handled here.
  */
-int __kprobes do_page_fault(struct pt_regs *regs, unsigned long address,
+int do_page_fault(struct pt_regs *regs, unsigned long address,
 			    unsigned long error_code)
 {
 	enum ctx_state prev_state = exception_enter();
@@ -498,8 +498,8 @@
 bail:
 	exception_exit(prev_state);
 	return rc;
-
 }
+NOKPROBE_SYMBOL(do_page_fault);
 
 /*
  * bad_page_fault is called when we have a bad access from the kernel.
diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index ef3ae89..90480e2 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -766,6 +766,29 @@
 }
 #endif /* CONFIG_MEMORY_HOTPLUG */
 
+static void update_hid_for_hash(void)
+{
+	unsigned long hid0;
+	unsigned long rb = 3UL << PPC_BITLSHIFT(53); /* IS = 3 */
+
+	asm volatile("ptesync": : :"memory");
+	/* prs = 0, ric = 2, rs = 0, r = 1 is = 3 */
+	asm volatile(PPC_TLBIE_5(%0, %4, %3, %2, %1)
+		     : : "r"(rb), "i"(0), "i"(0), "i"(2), "r"(0) : "memory");
+	asm volatile("eieio; tlbsync; ptesync; isync; slbia": : :"memory");
+	/*
+	 * now switch the HID
+	 */
+	hid0  = mfspr(SPRN_HID0);
+	hid0 &= ~HID0_POWER9_RADIX;
+	mtspr(SPRN_HID0, hid0);
+	asm volatile("isync": : :"memory");
+
+	/* Wait for it to happen */
+	while ((mfspr(SPRN_HID0) & HID0_POWER9_RADIX))
+		cpu_relax();
+}
+
 static void __init hash_init_partition_table(phys_addr_t hash_table,
 					     unsigned long htab_size)
 {
@@ -792,6 +815,8 @@
 	 */
 	partition_tb->patb1 = 0;
 	pr_info("Partition table %p\n", partition_tb);
+	if (cpu_has_feature(CPU_FTR_POWER9_DD1))
+		update_hid_for_hash();
 	/*
 	 * update partition table control register,
 	 * 64 K size.
@@ -1515,6 +1540,29 @@
 	local_irq_restore(flags);
 }
 
+#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
+static inline void tm_flush_hash_page(int local)
+{
+	/*
+	 * Transactions are not aborted by tlbiel, only tlbie. Without, syncing a
+	 * page back to a block device w/PIO could pick up transactional data
+	 * (bad!) so we force an abort here. Before the sync the page will be
+	 * made read-only, which will flush_hash_page. BIG ISSUE here: if the
+	 * kernel uses a page from userspace without unmapping it first, it may
+	 * see the speculated version.
+	 */
+	if (local && cpu_has_feature(CPU_FTR_TM) && current->thread.regs &&
+	    MSR_TM_ACTIVE(current->thread.regs->msr)) {
+		tm_enable();
+		tm_abort(TM_CAUSE_TLBI);
+	}
+}
+#else
+static inline void tm_flush_hash_page(int local)
+{
+}
+#endif
+
 /* WARNING: This is called from hash_low_64.S, if you change this prototype,
  *          do not forget to update the assembly call site !
  */
@@ -1541,21 +1589,7 @@
 					     ssize, local);
 	} pte_iterate_hashed_end();
 
-#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
-	/* Transactions are not aborted by tlbiel, only tlbie.
-	 * Without, syncing a page back to a block device w/ PIO could pick up
-	 * transactional data (bad!) so we force an abort here.  Before the
-	 * sync the page will be made read-only, which will flush_hash_page.
-	 * BIG ISSUE here: if the kernel uses a page from userspace without
-	 * unmapping it first, it may see the speculated version.
-	 */
-	if (local && cpu_has_feature(CPU_FTR_TM) &&
-	    current->thread.regs &&
-	    MSR_TM_ACTIVE(current->thread.regs->msr)) {
-		tm_enable();
-		tm_abort(TM_CAUSE_TLBI);
-	}
-#endif
+	tm_flush_hash_page(local);
 }
 
 #ifdef CONFIG_TRANSPARENT_HUGEPAGE
@@ -1612,22 +1646,7 @@
 					     MMU_PAGE_16M, ssize, local);
 	}
 tm_abort:
-#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
-	/* Transactions are not aborted by tlbiel, only tlbie.
-	 * Without, syncing a page back to a block device w/ PIO could pick up
-	 * transactional data (bad!) so we force an abort here.  Before the
-	 * sync the page will be made read-only, which will flush_hash_page.
-	 * BIG ISSUE here: if the kernel uses a page from userspace without
-	 * unmapping it first, it may see the speculated version.
-	 */
-	if (local && cpu_has_feature(CPU_FTR_TM) &&
-	    current->thread.regs &&
-	    MSR_TM_ACTIVE(current->thread.regs->msr)) {
-		tm_enable();
-		tm_abort(TM_CAUSE_TLBI);
-	}
-#endif
-	return;
+	tm_flush_hash_page(local);
 }
 #endif /* CONFIG_TRANSPARENT_HUGEPAGE */
 
diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c
index 7372ee1..a5d3ecd 100644
--- a/arch/powerpc/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -1019,8 +1019,15 @@
 
 	pte = READ_ONCE(*ptep);
 	mask = _PAGE_PRESENT | _PAGE_READ;
+
+	/*
+	 * On some CPUs like the 8xx, _PAGE_RW hence _PAGE_WRITE is defined
+	 * as 0 and _PAGE_RO has to be set when a page is not writable
+	 */
 	if (write)
 		mask |= _PAGE_WRITE;
+	else
+		mask |= _PAGE_RO;
 
 	if ((pte_val(pte) & mask) != mask)
 		return 0;
diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c
index 448685f..8a7c38b 100644
--- a/arch/powerpc/mm/init_32.c
+++ b/arch/powerpc/mm/init_32.c
@@ -137,7 +137,7 @@
 	if (memblock.memory.cnt > 1) {
 #ifndef CONFIG_WII
 		memblock_enforce_memory_limit(memblock.memory.regions[0].size);
-		printk(KERN_WARNING "Only using first contiguous memory region");
+		pr_warn("Only using first contiguous memory region\n");
 #else
 		wii_memory_fixups();
 #endif
diff --git a/arch/powerpc/mm/mmu_context_iommu.c b/arch/powerpc/mm/mmu_context_iommu.c
index da6a216..e0f1c33 100644
--- a/arch/powerpc/mm/mmu_context_iommu.c
+++ b/arch/powerpc/mm/mmu_context_iommu.c
@@ -15,6 +15,9 @@
 #include <linux/rculist.h>
 #include <linux/vmalloc.h>
 #include <linux/mutex.h>
+#include <linux/migrate.h>
+#include <linux/hugetlb.h>
+#include <linux/swap.h>
 #include <asm/mmu_context.h>
 
 static DEFINE_MUTEX(mem_list_mutex);
@@ -72,6 +75,55 @@
 }
 EXPORT_SYMBOL_GPL(mm_iommu_preregistered);
 
+/*
+ * Taken from alloc_migrate_target with changes to remove CMA allocations
+ */
+struct page *new_iommu_non_cma_page(struct page *page, unsigned long private,
+					int **resultp)
+{
+	gfp_t gfp_mask = GFP_USER;
+	struct page *new_page;
+
+	if (PageHuge(page) || PageTransHuge(page) || PageCompound(page))
+		return NULL;
+
+	if (PageHighMem(page))
+		gfp_mask |= __GFP_HIGHMEM;
+
+	/*
+	 * We don't want the allocation to force an OOM if possibe
+	 */
+	new_page = alloc_page(gfp_mask | __GFP_NORETRY | __GFP_NOWARN);
+	return new_page;
+}
+
+static int mm_iommu_move_page_from_cma(struct page *page)
+{
+	int ret = 0;
+	LIST_HEAD(cma_migrate_pages);
+
+	/* Ignore huge pages for now */
+	if (PageHuge(page) || PageTransHuge(page) || PageCompound(page))
+		return -EBUSY;
+
+	lru_add_drain();
+	ret = isolate_lru_page(page);
+	if (ret)
+		return ret;
+
+	list_add(&page->lru, &cma_migrate_pages);
+	put_page(page); /* Drop the gup reference */
+
+	ret = migrate_pages(&cma_migrate_pages, new_iommu_non_cma_page,
+				NULL, 0, MIGRATE_SYNC, MR_CMA);
+	if (ret) {
+		if (!list_empty(&cma_migrate_pages))
+			putback_movable_pages(&cma_migrate_pages);
+	}
+
+	return 0;
+}
+
 long mm_iommu_get(unsigned long ua, unsigned long entries,
 		struct mm_iommu_table_group_mem_t **pmem)
 {
@@ -124,15 +176,36 @@
 	for (i = 0; i < entries; ++i) {
 		if (1 != get_user_pages_fast(ua + (i << PAGE_SHIFT),
 					1/* pages */, 1/* iswrite */, &page)) {
+			ret = -EFAULT;
 			for (j = 0; j < i; ++j)
-				put_page(pfn_to_page(
-						mem->hpas[j] >> PAGE_SHIFT));
+				put_page(pfn_to_page(mem->hpas[j] >>
+						PAGE_SHIFT));
 			vfree(mem->hpas);
 			kfree(mem);
-			ret = -EFAULT;
 			goto unlock_exit;
 		}
-
+		/*
+		 * If we get a page from the CMA zone, since we are going to
+		 * be pinning these entries, we might as well move them out
+		 * of the CMA zone if possible. NOTE: faulting in + migration
+		 * can be expensive. Batching can be considered later
+		 */
+		if (get_pageblock_migratetype(page) == MIGRATE_CMA) {
+			if (mm_iommu_move_page_from_cma(page))
+				goto populate;
+			if (1 != get_user_pages_fast(ua + (i << PAGE_SHIFT),
+						1/* pages */, 1/* iswrite */,
+						&page)) {
+				ret = -EFAULT;
+				for (j = 0; j < i; ++j)
+					put_page(pfn_to_page(mem->hpas[j] >>
+								PAGE_SHIFT));
+				vfree(mem->hpas);
+				kfree(mem);
+				goto unlock_exit;
+			}
+		}
+populate:
 		mem->hpas[i] = page_to_pfn(page) << PAGE_SHIFT;
 	}
 
diff --git a/arch/powerpc/mm/pgtable-book3s64.c b/arch/powerpc/mm/pgtable-book3s64.c
index 3407930..f4f437c 100644
--- a/arch/powerpc/mm/pgtable-book3s64.c
+++ b/arch/powerpc/mm/pgtable-book3s64.c
@@ -35,7 +35,7 @@
 #endif
 	changed = !pmd_same(*(pmdp), entry);
 	if (changed) {
-		__ptep_set_access_flags(pmdp_ptep(pmdp), pmd_pte(entry));
+		__ptep_set_access_flags(vma->vm_mm, pmdp_ptep(pmdp), pmd_pte(entry));
 		flush_pmd_tlb_range(vma, address, address + HPAGE_PMD_SIZE);
 	}
 	return changed;
@@ -116,3 +116,12 @@
 	return;
 }
 #endif /* CONFIG_TRANSPARENT_HUGEPAGE */
+
+/* For use by kexec */
+void mmu_cleanup_all(void)
+{
+	if (radix_enabled())
+		radix__mmu_cleanup_all();
+	else if (mmu_hash_ops.hpte_clear_all)
+		mmu_hash_ops.hpte_clear_all();
+}
diff --git a/arch/powerpc/mm/pgtable-radix.c b/arch/powerpc/mm/pgtable-radix.c
index af897d9..ed7bddc 100644
--- a/arch/powerpc/mm/pgtable-radix.c
+++ b/arch/powerpc/mm/pgtable-radix.c
@@ -294,6 +294,32 @@
 	return;
 }
 
+static void update_hid_for_radix(void)
+{
+	unsigned long hid0;
+	unsigned long rb = 3UL << PPC_BITLSHIFT(53); /* IS = 3 */
+
+	asm volatile("ptesync": : :"memory");
+	/* prs = 0, ric = 2, rs = 0, r = 1 is = 3 */
+	asm volatile(PPC_TLBIE_5(%0, %4, %3, %2, %1)
+		     : : "r"(rb), "i"(1), "i"(0), "i"(2), "r"(0) : "memory");
+	/* prs = 1, ric = 2, rs = 0, r = 1 is = 3 */
+	asm volatile(PPC_TLBIE_5(%0, %4, %3, %2, %1)
+		     : : "r"(rb), "i"(1), "i"(1), "i"(2), "r"(0) : "memory");
+	asm volatile("eieio; tlbsync; ptesync; isync; slbia": : :"memory");
+	/*
+	 * now switch the HID
+	 */
+	hid0  = mfspr(SPRN_HID0);
+	hid0 |= HID0_POWER9_RADIX;
+	mtspr(SPRN_HID0, hid0);
+	asm volatile("isync": : :"memory");
+
+	/* Wait for it to happen */
+	while (!(mfspr(SPRN_HID0) & HID0_POWER9_RADIX))
+		cpu_relax();
+}
+
 void __init radix__early_init_mmu(void)
 {
 	unsigned long lpcr;
@@ -345,6 +371,8 @@
 
 	if (!firmware_has_feature(FW_FEATURE_LPAR)) {
 		radix_init_native();
+		if (cpu_has_feature(CPU_FTR_POWER9_DD1))
+			update_hid_for_radix();
 		lpcr = mfspr(SPRN_LPCR);
 		mtspr(SPRN_LPCR, lpcr | LPCR_UPRT | LPCR_HR);
 		radix_init_partition_table();
@@ -368,6 +396,18 @@
 	}
 }
 
+void radix__mmu_cleanup_all(void)
+{
+	unsigned long lpcr;
+
+	if (!firmware_has_feature(FW_FEATURE_LPAR)) {
+		lpcr = mfspr(SPRN_LPCR);
+		mtspr(SPRN_LPCR, lpcr & ~LPCR_UPRT);
+		mtspr(SPRN_PTCR, 0);
+		radix__flush_tlb_all();
+	}
+}
+
 void radix__setup_initial_memory_limit(phys_addr_t first_memblock_base,
 				phys_addr_t first_memblock_size)
 {
diff --git a/arch/powerpc/mm/pgtable.c b/arch/powerpc/mm/pgtable.c
index 0b6fb24..911fdfb 100644
--- a/arch/powerpc/mm/pgtable.c
+++ b/arch/powerpc/mm/pgtable.c
@@ -224,7 +224,7 @@
 	if (changed) {
 		if (!is_vm_hugetlb_page(vma))
 			assert_pte_locked(vma->vm_mm, address);
-		__ptep_set_access_flags(ptep, entry);
+		__ptep_set_access_flags(vma->vm_mm, ptep, entry);
 		flush_tlb_page(vma, address);
 	}
 	return changed;
diff --git a/arch/powerpc/mm/slb_low.S b/arch/powerpc/mm/slb_low.S
index 9f19834..e2974fc 100644
--- a/arch/powerpc/mm/slb_low.S
+++ b/arch/powerpc/mm/slb_low.S
@@ -178,11 +178,9 @@
 END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT)
 	b	slb_finish_load
 
-8:	/* invalid EA */
-	li	r10,0			/* BAD_VSID */
-	li	r9,0			/* BAD_VSID */
-	li	r11,SLB_VSID_USER	/* flags don't much matter */
-	b	slb_finish_load
+8:	/* invalid EA - return an error indication */
+	crset	4*cr0+eq		/* indicate failure */
+	blr
 
 /*
  * Finish loading of an SLB entry and return
diff --git a/arch/powerpc/mm/tlb-radix.c b/arch/powerpc/mm/tlb-radix.c
index 48df05e..0e49ec5 100644
--- a/arch/powerpc/mm/tlb-radix.c
+++ b/arch/powerpc/mm/tlb-radix.c
@@ -400,3 +400,27 @@
 	radix__flush_tlb_range_psize(vma->vm_mm, start, end, MMU_PAGE_2M);
 }
 EXPORT_SYMBOL(radix__flush_pmd_tlb_range);
+
+void radix__flush_tlb_all(void)
+{
+	unsigned long rb,prs,r,rs;
+	unsigned long ric = RIC_FLUSH_ALL;
+
+	rb = 0x3 << PPC_BITLSHIFT(53); /* IS = 3 */
+	prs = 0; /* partition scoped */
+	r = 1;   /* raidx format */
+	rs = 1 & ((1UL << 32) - 1); /* any LPID value to flush guest mappings */
+
+	asm volatile("ptesync": : :"memory");
+	/*
+	 * now flush guest entries by passing PRS = 1 and LPID != 0
+	 */
+	asm volatile(PPC_TLBIE_5(%0, %4, %3, %2, %1)
+		     : : "r"(rb), "i"(r), "i"(1), "i"(ric), "r"(rs) : "memory");
+	/*
+	 * now flush host entires by passing PRS = 0 and LPID == 0
+	 */
+	asm volatile(PPC_TLBIE_5(%0, %4, %3, %2, %1)
+		     : : "r"(rb), "i"(r), "i"(prs), "i"(ric), "r"(0) : "memory");
+	asm volatile("eieio; tlbsync; ptesync": : :"memory");
+}
diff --git a/arch/powerpc/net/bpf_jit.h b/arch/powerpc/net/bpf_jit.h
index d5301b6..89f7007 100644
--- a/arch/powerpc/net/bpf_jit.h
+++ b/arch/powerpc/net/bpf_jit.h
@@ -40,6 +40,8 @@
 #define PPC_BLR()		EMIT(PPC_INST_BLR)
 #define PPC_BLRL()		EMIT(PPC_INST_BLRL)
 #define PPC_MTLR(r)		EMIT(PPC_INST_MTLR | ___PPC_RT(r))
+#define PPC_BCTR()		EMIT(PPC_INST_BCTR)
+#define PPC_MTCTR(r)		EMIT(PPC_INST_MTCTR | ___PPC_RT(r))
 #define PPC_ADDI(d, a, i)	EMIT(PPC_INST_ADDI | ___PPC_RT(d) |	      \
 				     ___PPC_RA(a) | IMM_L(i))
 #define PPC_MR(d, a)		PPC_OR(d, a, a)
diff --git a/arch/powerpc/net/bpf_jit64.h b/arch/powerpc/net/bpf_jit64.h
index 5046d6f..62fa758 100644
--- a/arch/powerpc/net/bpf_jit64.h
+++ b/arch/powerpc/net/bpf_jit64.h
@@ -16,30 +16,33 @@
 
 /*
  * Stack layout:
+ * Ensure the top half (upto local_tmp_var) stays consistent
+ * with our redzone usage.
  *
  *		[	prev sp		] <-------------
  *		[   nv gpr save area	] 8*8		|
+ *		[    tail_call_cnt	] 8		|
+ *		[    local_tmp_var	] 8		|
  * fp (r31) -->	[   ebpf stack space	] 512		|
- *		[  local/tmp var space	] 16		|
  *		[     frame header	] 32/112	|
  * sp (r1) --->	[    stack pointer	] --------------
  */
 
-/* for bpf JIT code internal usage */
-#define BPF_PPC_STACK_LOCALS	16
 /* for gpr non volatile registers BPG_REG_6 to 10, plus skb cache registers */
 #define BPF_PPC_STACK_SAVE	(8*8)
+/* for bpf JIT code internal usage */
+#define BPF_PPC_STACK_LOCALS	16
 /* Ensure this is quadword aligned */
-#define BPF_PPC_STACKFRAME	(STACK_FRAME_MIN_SIZE + BPF_PPC_STACK_LOCALS + \
-				 MAX_BPF_STACK + BPF_PPC_STACK_SAVE)
+#define BPF_PPC_STACKFRAME	(STACK_FRAME_MIN_SIZE + MAX_BPF_STACK + \
+				 BPF_PPC_STACK_LOCALS + BPF_PPC_STACK_SAVE)
 
 #ifndef __ASSEMBLY__
 
 /* BPF register usage */
-#define SKB_HLEN_REG	(MAX_BPF_REG + 0)
-#define SKB_DATA_REG	(MAX_BPF_REG + 1)
-#define TMP_REG_1	(MAX_BPF_REG + 2)
-#define TMP_REG_2	(MAX_BPF_REG + 3)
+#define SKB_HLEN_REG	(MAX_BPF_JIT_REG + 0)
+#define SKB_DATA_REG	(MAX_BPF_JIT_REG + 1)
+#define TMP_REG_1	(MAX_BPF_JIT_REG + 2)
+#define TMP_REG_2	(MAX_BPF_JIT_REG + 3)
 
 /* BPF to ppc register mappings */
 static const int b2p[] = {
@@ -59,12 +62,16 @@
 	/* frame pointer aka BPF_REG_10 */
 	[BPF_REG_FP] = 31,
 	/* eBPF jit internal registers */
+	[BPF_REG_AX] = 2,
 	[SKB_HLEN_REG] = 25,
 	[SKB_DATA_REG] = 26,
 	[TMP_REG_1] = 9,
 	[TMP_REG_2] = 10
 };
 
+/* PPC NVR range -- update this if we ever use NVRs below r24 */
+#define BPF_PPC_NVR_MIN		24
+
 /* Assembly helpers */
 #define DECLARE_LOAD_FUNC(func)	u64 func(u64 r3, u64 r4);			\
 				u64 func##_negative_offset(u64 r3, u64 r4);	\
@@ -82,6 +89,7 @@
 #define SEEN_FUNC	0x1000 /* might call external helpers */
 #define SEEN_STACK	0x2000 /* uses BPF stack */
 #define SEEN_SKB	0x4000 /* uses sk_buff */
+#define SEEN_TAILCALL	0x8000 /* uses tail calls */
 
 struct codegen_context {
 	/*
diff --git a/arch/powerpc/net/bpf_jit_comp64.c b/arch/powerpc/net/bpf_jit_comp64.c
index 6073b78..0fe98a5 100644
--- a/arch/powerpc/net/bpf_jit_comp64.c
+++ b/arch/powerpc/net/bpf_jit_comp64.c
@@ -17,6 +17,7 @@
 #include <linux/filter.h>
 #include <linux/if_vlan.h>
 #include <asm/kprobes.h>
+#include <linux/bpf.h>
 
 #include "bpf_jit64.h"
 
@@ -58,6 +59,40 @@
 	return ctx->seen & SEEN_FUNC || bpf_is_seen_register(ctx, BPF_REG_FP);
 }
 
+/*
+ * When not setting up our own stackframe, the redzone usage is:
+ *
+ *		[	prev sp		] <-------------
+ *		[	  ...       	] 		|
+ * sp (r1) --->	[    stack pointer	] --------------
+ *		[   nv gpr save area	] 8*8
+ *		[    tail_call_cnt	] 8
+ *		[    local_tmp_var	] 8
+ *		[   unused red zone	] 208 bytes protected
+ */
+static int bpf_jit_stack_local(struct codegen_context *ctx)
+{
+	if (bpf_has_stack_frame(ctx))
+		return STACK_FRAME_MIN_SIZE + MAX_BPF_STACK;
+	else
+		return -(BPF_PPC_STACK_SAVE + 16);
+}
+
+static int bpf_jit_stack_tailcallcnt(struct codegen_context *ctx)
+{
+	return bpf_jit_stack_local(ctx) + 8;
+}
+
+static int bpf_jit_stack_offsetof(struct codegen_context *ctx, int reg)
+{
+	if (reg >= BPF_PPC_NVR_MIN && reg < 32)
+		return (bpf_has_stack_frame(ctx) ? BPF_PPC_STACKFRAME : 0)
+							- (8 * (32 - reg));
+
+	pr_err("BPF JIT is asking about unknown registers");
+	BUG();
+}
+
 static void bpf_jit_emit_skb_loads(u32 *image, struct codegen_context *ctx)
 {
 	/*
@@ -73,6 +108,103 @@
 	PPC_BPF_LL(b2p[SKB_DATA_REG], 3, offsetof(struct sk_buff, data));
 }
 
+static void bpf_jit_build_prologue(u32 *image, struct codegen_context *ctx)
+{
+	int i;
+
+	/*
+	 * Initialize tail_call_cnt if we do tail calls.
+	 * Otherwise, put in NOPs so that it can be skipped when we are
+	 * invoked through a tail call.
+	 */
+	if (ctx->seen & SEEN_TAILCALL) {
+		PPC_LI(b2p[TMP_REG_1], 0);
+		/* this goes in the redzone */
+		PPC_BPF_STL(b2p[TMP_REG_1], 1, -(BPF_PPC_STACK_SAVE + 8));
+	} else {
+		PPC_NOP();
+		PPC_NOP();
+	}
+
+#define BPF_TAILCALL_PROLOGUE_SIZE	8
+
+	if (bpf_has_stack_frame(ctx)) {
+		/*
+		 * We need a stack frame, but we don't necessarily need to
+		 * save/restore LR unless we call other functions
+		 */
+		if (ctx->seen & SEEN_FUNC) {
+			EMIT(PPC_INST_MFLR | __PPC_RT(R0));
+			PPC_BPF_STL(0, 1, PPC_LR_STKOFF);
+		}
+
+		PPC_BPF_STLU(1, 1, -BPF_PPC_STACKFRAME);
+	}
+
+	/*
+	 * Back up non-volatile regs -- BPF registers 6-10
+	 * If we haven't created our own stack frame, we save these
+	 * in the protected zone below the previous stack frame
+	 */
+	for (i = BPF_REG_6; i <= BPF_REG_10; i++)
+		if (bpf_is_seen_register(ctx, i))
+			PPC_BPF_STL(b2p[i], 1, bpf_jit_stack_offsetof(ctx, b2p[i]));
+
+	/*
+	 * Save additional non-volatile regs if we cache skb
+	 * Also, setup skb data
+	 */
+	if (ctx->seen & SEEN_SKB) {
+		PPC_BPF_STL(b2p[SKB_HLEN_REG], 1,
+				bpf_jit_stack_offsetof(ctx, b2p[SKB_HLEN_REG]));
+		PPC_BPF_STL(b2p[SKB_DATA_REG], 1,
+				bpf_jit_stack_offsetof(ctx, b2p[SKB_DATA_REG]));
+		bpf_jit_emit_skb_loads(image, ctx);
+	}
+
+	/* Setup frame pointer to point to the bpf stack area */
+	if (bpf_is_seen_register(ctx, BPF_REG_FP))
+		PPC_ADDI(b2p[BPF_REG_FP], 1,
+				STACK_FRAME_MIN_SIZE + MAX_BPF_STACK);
+}
+
+static void bpf_jit_emit_common_epilogue(u32 *image, struct codegen_context *ctx)
+{
+	int i;
+
+	/* Restore NVRs */
+	for (i = BPF_REG_6; i <= BPF_REG_10; i++)
+		if (bpf_is_seen_register(ctx, i))
+			PPC_BPF_LL(b2p[i], 1, bpf_jit_stack_offsetof(ctx, b2p[i]));
+
+	/* Restore non-volatile registers used for skb cache */
+	if (ctx->seen & SEEN_SKB) {
+		PPC_BPF_LL(b2p[SKB_HLEN_REG], 1,
+				bpf_jit_stack_offsetof(ctx, b2p[SKB_HLEN_REG]));
+		PPC_BPF_LL(b2p[SKB_DATA_REG], 1,
+				bpf_jit_stack_offsetof(ctx, b2p[SKB_DATA_REG]));
+	}
+
+	/* Tear down our stack frame */
+	if (bpf_has_stack_frame(ctx)) {
+		PPC_ADDI(1, 1, BPF_PPC_STACKFRAME);
+		if (ctx->seen & SEEN_FUNC) {
+			PPC_BPF_LL(0, 1, PPC_LR_STKOFF);
+			PPC_MTLR(0);
+		}
+	}
+}
+
+static void bpf_jit_build_epilogue(u32 *image, struct codegen_context *ctx)
+{
+	bpf_jit_emit_common_epilogue(image, ctx);
+
+	/* Move result to r3 */
+	PPC_MR(3, b2p[BPF_REG_0]);
+
+	PPC_BLR();
+}
+
 static void bpf_jit_emit_func_call(u32 *image, struct codegen_context *ctx, u64 func)
 {
 #ifdef PPC64_ELF_ABI_v1
@@ -97,86 +229,67 @@
 	PPC_BLRL();
 }
 
-static void bpf_jit_build_prologue(u32 *image, struct codegen_context *ctx)
+static void bpf_jit_emit_tail_call(u32 *image, struct codegen_context *ctx, u32 out)
 {
-	int i;
-	bool new_stack_frame = bpf_has_stack_frame(ctx);
-
-	if (new_stack_frame) {
-		/*
-		 * We need a stack frame, but we don't necessarily need to
-		 * save/restore LR unless we call other functions
-		 */
-		if (ctx->seen & SEEN_FUNC) {
-			EMIT(PPC_INST_MFLR | __PPC_RT(R0));
-			PPC_BPF_STL(0, 1, PPC_LR_STKOFF);
-		}
-
-		PPC_BPF_STLU(1, 1, -BPF_PPC_STACKFRAME);
-	}
+	/*
+	 * By now, the eBPF program has already setup parameters in r3, r4 and r5
+	 * r3/BPF_REG_1 - pointer to ctx -- passed as is to the next bpf program
+	 * r4/BPF_REG_2 - pointer to bpf_array
+	 * r5/BPF_REG_3 - index in bpf_array
+	 */
+	int b2p_bpf_array = b2p[BPF_REG_2];
+	int b2p_index = b2p[BPF_REG_3];
 
 	/*
-	 * Back up non-volatile regs -- BPF registers 6-10
-	 * If we haven't created our own stack frame, we save these
-	 * in the protected zone below the previous stack frame
+	 * if (index >= array->map.max_entries)
+	 *   goto out;
 	 */
-	for (i = BPF_REG_6; i <= BPF_REG_10; i++)
-		if (bpf_is_seen_register(ctx, i))
-			PPC_BPF_STL(b2p[i], 1,
-				(new_stack_frame ? BPF_PPC_STACKFRAME : 0) -
-					(8 * (32 - b2p[i])));
+	PPC_LWZ(b2p[TMP_REG_1], b2p_bpf_array, offsetof(struct bpf_array, map.max_entries));
+	PPC_CMPLW(b2p_index, b2p[TMP_REG_1]);
+	PPC_BCC(COND_GE, out);
 
 	/*
-	 * Save additional non-volatile regs if we cache skb
-	 * Also, setup skb data
+	 * if (tail_call_cnt > MAX_TAIL_CALL_CNT)
+	 *   goto out;
 	 */
-	if (ctx->seen & SEEN_SKB) {
-		PPC_BPF_STL(b2p[SKB_HLEN_REG], 1,
-			BPF_PPC_STACKFRAME - (8 * (32 - b2p[SKB_HLEN_REG])));
-		PPC_BPF_STL(b2p[SKB_DATA_REG], 1,
-			BPF_PPC_STACKFRAME - (8 * (32 - b2p[SKB_DATA_REG])));
-		bpf_jit_emit_skb_loads(image, ctx);
-	}
+	PPC_LD(b2p[TMP_REG_1], 1, bpf_jit_stack_tailcallcnt(ctx));
+	PPC_CMPLWI(b2p[TMP_REG_1], MAX_TAIL_CALL_CNT);
+	PPC_BCC(COND_GT, out);
 
-	/* Setup frame pointer to point to the bpf stack area */
-	if (bpf_is_seen_register(ctx, BPF_REG_FP))
-		PPC_ADDI(b2p[BPF_REG_FP], 1,
-				BPF_PPC_STACKFRAME - BPF_PPC_STACK_SAVE);
-}
+	/*
+	 * tail_call_cnt++;
+	 */
+	PPC_ADDI(b2p[TMP_REG_1], b2p[TMP_REG_1], 1);
+	PPC_BPF_STL(b2p[TMP_REG_1], 1, bpf_jit_stack_tailcallcnt(ctx));
 
-static void bpf_jit_build_epilogue(u32 *image, struct codegen_context *ctx)
-{
-	int i;
-	bool new_stack_frame = bpf_has_stack_frame(ctx);
+	/* prog = array->ptrs[index]; */
+	PPC_MULI(b2p[TMP_REG_1], b2p_index, 8);
+	PPC_ADD(b2p[TMP_REG_1], b2p[TMP_REG_1], b2p_bpf_array);
+	PPC_LD(b2p[TMP_REG_1], b2p[TMP_REG_1], offsetof(struct bpf_array, ptrs));
 
-	/* Move result to r3 */
-	PPC_MR(3, b2p[BPF_REG_0]);
+	/*
+	 * if (prog == NULL)
+	 *   goto out;
+	 */
+	PPC_CMPLDI(b2p[TMP_REG_1], 0);
+	PPC_BCC(COND_EQ, out);
 
-	/* Restore NVRs */
-	for (i = BPF_REG_6; i <= BPF_REG_10; i++)
-		if (bpf_is_seen_register(ctx, i))
-			PPC_BPF_LL(b2p[i], 1,
-				(new_stack_frame ? BPF_PPC_STACKFRAME : 0) -
-					(8 * (32 - b2p[i])));
+	/* goto *(prog->bpf_func + prologue_size); */
+	PPC_LD(b2p[TMP_REG_1], b2p[TMP_REG_1], offsetof(struct bpf_prog, bpf_func));
+#ifdef PPC64_ELF_ABI_v1
+	/* skip past the function descriptor */
+	PPC_ADDI(b2p[TMP_REG_1], b2p[TMP_REG_1],
+			FUNCTION_DESCR_SIZE + BPF_TAILCALL_PROLOGUE_SIZE);
+#else
+	PPC_ADDI(b2p[TMP_REG_1], b2p[TMP_REG_1], BPF_TAILCALL_PROLOGUE_SIZE);
+#endif
+	PPC_MTCTR(b2p[TMP_REG_1]);
 
-	/* Restore non-volatile registers used for skb cache */
-	if (ctx->seen & SEEN_SKB) {
-		PPC_BPF_LL(b2p[SKB_HLEN_REG], 1,
-			BPF_PPC_STACKFRAME - (8 * (32 - b2p[SKB_HLEN_REG])));
-		PPC_BPF_LL(b2p[SKB_DATA_REG], 1,
-			BPF_PPC_STACKFRAME - (8 * (32 - b2p[SKB_DATA_REG])));
-	}
+	/* tear down stack, restore NVRs, ... */
+	bpf_jit_emit_common_epilogue(image, ctx);
 
-	/* Tear down our stack frame */
-	if (new_stack_frame) {
-		PPC_ADDI(1, 1, BPF_PPC_STACKFRAME);
-		if (ctx->seen & SEEN_FUNC) {
-			PPC_BPF_LL(0, 1, PPC_LR_STKOFF);
-			PPC_MTLR(0);
-		}
-	}
-
-	PPC_BLR();
+	PPC_BCTR();
+	/* out: */
 }
 
 /* Assemble the body code between the prologue & epilogue */
@@ -200,7 +313,6 @@
 		u64 imm64;
 		u8 *func;
 		u32 true_cond;
-		int stack_local_off;
 
 		/*
 		 * addrs[] maps a BPF bytecode address into a real offset from
@@ -219,9 +331,9 @@
 		 * optimization but everything else should work without
 		 * any issues.
 		 */
-		if (dst_reg >= 24 && dst_reg <= 31)
+		if (dst_reg >= BPF_PPC_NVR_MIN && dst_reg < 32)
 			bpf_set_seen_register(ctx, insn[i].dst_reg);
-		if (src_reg >= 24 && src_reg <= 31)
+		if (src_reg >= BPF_PPC_NVR_MIN && src_reg < 32)
 			bpf_set_seen_register(ctx, insn[i].src_reg);
 
 		switch (code) {
@@ -490,25 +602,12 @@
 				 * Way easier and faster(?) to store the value
 				 * into stack and then use ldbrx
 				 *
-				 * First, determine where in stack we can store
-				 * this:
-				 * - if we have allotted a stack frame, then we
-				 *   will utilize the area set aside by
-				 *   BPF_PPC_STACK_LOCALS
-				 * - else, we use the area beneath the NV GPR
-				 *   save area
-				 *
 				 * ctx->seen will be reliable in pass2, but
 				 * the instructions generated will remain the
 				 * same across all passes
 				 */
-				if (bpf_has_stack_frame(ctx))
-					stack_local_off = STACK_FRAME_MIN_SIZE;
-				else
-					stack_local_off = -(BPF_PPC_STACK_SAVE + 8);
-
-				PPC_STD(dst_reg, 1, stack_local_off);
-				PPC_ADDI(b2p[TMP_REG_1], 1, stack_local_off);
+				PPC_STD(dst_reg, 1, bpf_jit_stack_local(ctx));
+				PPC_ADDI(b2p[TMP_REG_1], 1, bpf_jit_stack_local(ctx));
 				PPC_LDBRX(dst_reg, 0, b2p[TMP_REG_1]);
 				break;
 			}
@@ -668,7 +767,7 @@
 
 			/* Save skb pointer if we need to re-cache skb data */
 			if (bpf_helper_changes_skb_data(func))
-				PPC_BPF_STL(3, 1, STACK_FRAME_MIN_SIZE);
+				PPC_BPF_STL(3, 1, bpf_jit_stack_local(ctx));
 
 			bpf_jit_emit_func_call(image, ctx, (u64)func);
 
@@ -678,7 +777,7 @@
 			/* refresh skb cache */
 			if (bpf_helper_changes_skb_data(func)) {
 				/* reload skb pointer to r3 */
-				PPC_BPF_LL(3, 1, STACK_FRAME_MIN_SIZE);
+				PPC_BPF_LL(3, 1, bpf_jit_stack_local(ctx));
 				bpf_jit_emit_skb_loads(image, ctx);
 			}
 			break;
@@ -837,9 +936,12 @@
 			break;
 
 		/*
-		 * TODO: Tail call
+		 * Tail call
 		 */
 		case BPF_JMP | BPF_CALL | BPF_X:
+			ctx->seen |= SEEN_TAILCALL;
+			bpf_jit_emit_tail_call(image, ctx, addrs[i + 1]);
+			break;
 
 		default:
 			/*
@@ -872,21 +974,37 @@
 	int pass;
 	int flen;
 	struct bpf_binary_header *bpf_hdr;
+	struct bpf_prog *org_fp = fp;
+	struct bpf_prog *tmp_fp;
+	bool bpf_blinded = false;
 
 	if (!bpf_jit_enable)
-		return fp;
+		return org_fp;
+
+	tmp_fp = bpf_jit_blind_constants(org_fp);
+	if (IS_ERR(tmp_fp))
+		return org_fp;
+
+	if (tmp_fp != org_fp) {
+		bpf_blinded = true;
+		fp = tmp_fp;
+	}
 
 	flen = fp->len;
 	addrs = kzalloc((flen+1) * sizeof(*addrs), GFP_KERNEL);
-	if (addrs == NULL)
-		return fp;
-
-	cgctx.idx = 0;
-	cgctx.seen = 0;
-	/* Scouting faux-generate pass 0 */
-	if (bpf_jit_build_body(fp, 0, &cgctx, addrs))
-		/* We hit something illegal or unsupported. */
+	if (addrs == NULL) {
+		fp = org_fp;
 		goto out;
+	}
+
+	memset(&cgctx, 0, sizeof(struct codegen_context));
+
+	/* Scouting faux-generate pass 0 */
+	if (bpf_jit_build_body(fp, 0, &cgctx, addrs)) {
+		/* We hit something illegal or unsupported. */
+		fp = org_fp;
+		goto out;
+	}
 
 	/*
 	 * Pretend to build prologue, given the features we've seen.  This will
@@ -901,8 +1019,10 @@
 
 	bpf_hdr = bpf_jit_binary_alloc(alloclen, &image, 4,
 			bpf_jit_fill_ill_insns);
-	if (!bpf_hdr)
+	if (!bpf_hdr) {
+		fp = org_fp;
 		goto out;
+	}
 
 	code_base = (u32 *)(image + FUNCTION_DESCR_SIZE);
 
@@ -939,6 +1059,10 @@
 
 out:
 	kfree(addrs);
+
+	if (bpf_blinded)
+		bpf_jit_prog_release_other(fp, fp == org_fp ? tmp_fp : org_fp);
+
 	return fp;
 }
 
diff --git a/arch/powerpc/oprofile/cell/spu_profiler.c b/arch/powerpc/oprofile/cell/spu_profiler.c
index b129d00..b19265d 100644
--- a/arch/powerpc/oprofile/cell/spu_profiler.c
+++ b/arch/powerpc/oprofile/cell/spu_profiler.c
@@ -43,7 +43,7 @@
 #define SPU_PC_MASK	     0xFFFF
 
 DEFINE_SPINLOCK(oprof_spu_smpl_arry_lck);
-unsigned long oprof_spu_smpl_arry_lck_flags;
+static unsigned long oprof_spu_smpl_arry_lck_flags;
 
 void set_spu_profiling_frequency(unsigned int freq_khz, unsigned int cycles_reset)
 {
diff --git a/arch/powerpc/oprofile/cell/spu_task_sync.c b/arch/powerpc/oprofile/cell/spu_task_sync.c
index ef2142f..83d2b4e 100644
--- a/arch/powerpc/oprofile/cell/spu_task_sync.c
+++ b/arch/powerpc/oprofile/cell/spu_task_sync.c
@@ -36,7 +36,7 @@
 static DEFINE_SPINLOCK(buffer_lock);
 static DEFINE_SPINLOCK(cache_lock);
 static int num_spu_nodes;
-int spu_prof_num_nodes;
+static int spu_prof_num_nodes;
 
 struct spu_buffer spu_buff[MAX_NUMNODES * SPUS_PER_NODE];
 struct delayed_work spu_work;
@@ -88,7 +88,7 @@
 /* This function copies the per SPU buffers to the
  * OProfile kernel buffer.
  */
-void sync_spu_buff(void)
+static void sync_spu_buff(void)
 {
 	int spu;
 	unsigned long flags;
diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c
index 4ed377f..72c27b8 100644
--- a/arch/powerpc/perf/core-book3s.c
+++ b/arch/powerpc/perf/core-book3s.c
@@ -2158,7 +2158,7 @@
 		irq_exit();
 }
 
-int power_pmu_prepare_cpu(unsigned int cpu)
+static int power_pmu_prepare_cpu(unsigned int cpu)
 {
 	struct cpu_hw_events *cpuhw = &per_cpu(cpu_hw_events, cpu);
 
diff --git a/arch/powerpc/perf/hv-gpci.c b/arch/powerpc/perf/hv-gpci.c
index 7aa3723..43fabb3 100644
--- a/arch/powerpc/perf/hv-gpci.c
+++ b/arch/powerpc/perf/hv-gpci.c
@@ -131,7 +131,7 @@
 #define HGPCI_MAX_DATA_BYTES \
 	(HGPCI_REQ_BUFFER_SIZE - sizeof(struct hv_get_perf_counter_info_params))
 
-DEFINE_PER_CPU(char, hv_gpci_reqb[HGPCI_REQ_BUFFER_SIZE]) __aligned(sizeof(uint64_t));
+static DEFINE_PER_CPU(char, hv_gpci_reqb[HGPCI_REQ_BUFFER_SIZE]) __aligned(sizeof(uint64_t));
 
 struct hv_gpci_request_buffer {
 	struct hv_get_perf_counter_info_params params;
diff --git a/arch/powerpc/perf/power7-pmu.c b/arch/powerpc/perf/power7-pmu.c
index a383c23..7963658 100644
--- a/arch/powerpc/perf/power7-pmu.c
+++ b/arch/powerpc/perf/power7-pmu.c
@@ -416,7 +416,7 @@
 	NULL,
 };
 
-struct attribute_group power7_pmu_format_group = {
+static struct attribute_group power7_pmu_format_group = {
 	.name = "format",
 	.attrs = power7_pmu_format_attr,
 };
diff --git a/arch/powerpc/perf/power8-pmu.c b/arch/powerpc/perf/power8-pmu.c
index 5fde2b1..ab830d1 100644
--- a/arch/powerpc/perf/power8-pmu.c
+++ b/arch/powerpc/perf/power8-pmu.c
@@ -204,7 +204,7 @@
 	NULL,
 };
 
-struct attribute_group power8_pmu_format_group = {
+static struct attribute_group power8_pmu_format_group = {
 	.name = "format",
 	.attrs = power8_pmu_format_attr,
 };
diff --git a/arch/powerpc/perf/power9-pmu.c b/arch/powerpc/perf/power9-pmu.c
index 7883463..8e9a819 100644
--- a/arch/powerpc/perf/power9-pmu.c
+++ b/arch/powerpc/perf/power9-pmu.c
@@ -119,7 +119,7 @@
 	NULL,
 };
 
-struct attribute_group power9_pmu_format_group = {
+static struct attribute_group power9_pmu_format_group = {
 	.name = "format",
 	.attrs = power9_pmu_format_attr,
 };
diff --git a/arch/powerpc/platforms/44x/warp.c b/arch/powerpc/platforms/44x/warp.c
index 5ecce54..a886c2c 100644
--- a/arch/powerpc/platforms/44x/warp.c
+++ b/arch/powerpc/platforms/44x/warp.c
@@ -204,7 +204,7 @@
 	i2c_smbus_write_byte_data(client, 3,  0); /* Tlow */
 
 	irq = irq_of_parse_and_map(np, 0);
-	if (irq  == NO_IRQ) {
+	if (!irq) {
 		printk(KERN_ERR __FILE__ ": Unable to get ad7414 irq\n");
 		return;
 	}
diff --git a/arch/powerpc/platforms/512x/mpc5121_ads_cpld.c b/arch/powerpc/platforms/512x/mpc5121_ads_cpld.c
index 0035d14..fe4d4ea 100644
--- a/arch/powerpc/platforms/512x/mpc5121_ads_cpld.c
+++ b/arch/powerpc/platforms/512x/mpc5121_ads_cpld.c
@@ -97,7 +97,7 @@
 	status |= (ignore | mask);
 
 	if (status == 0xff)
-		return NO_IRQ;
+		return 0;
 
 	cpld_irq = ffz(status) + offset;
 
@@ -110,14 +110,14 @@
 
 	irq = cpld_pic_get_irq(0, PCI_IGNORE, &cpld_regs->pci_status,
 		&cpld_regs->pci_mask);
-	if (irq != NO_IRQ) {
+	if (irq) {
 		generic_handle_irq(irq);
 		return;
 	}
 
 	irq = cpld_pic_get_irq(8, MISC_IGNORE, &cpld_regs->misc_status,
 		&cpld_regs->misc_mask);
-	if (irq != NO_IRQ) {
+	if (irq) {
 		generic_handle_irq(irq);
 		return;
 	}
@@ -177,7 +177,7 @@
 		goto end;
 
 	cascade_irq = irq_of_parse_and_map(np, 0);
-	if (cascade_irq == NO_IRQ)
+	if (!cascade_irq)
 		goto end;
 
 	/*
diff --git a/arch/powerpc/platforms/512x/mpc512x_lpbfifo.c b/arch/powerpc/platforms/512x/mpc512x_lpbfifo.c
index d93dd4a..cec3f88 100644
--- a/arch/powerpc/platforms/512x/mpc512x_lpbfifo.c
+++ b/arch/powerpc/platforms/512x/mpc512x_lpbfifo.c
@@ -473,7 +473,7 @@
 	}
 
 	lpbfifo.irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
-	if (lpbfifo.irq == NO_IRQ) {
+	if (!lpbfifo.irq) {
 		dev_err(&pdev->dev, "mapping irq failed\n");
 		ret = -ENODEV;
 		goto err0;
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pic.c b/arch/powerpc/platforms/52xx/mpc52xx_pic.c
index 4fe2074..fc98912 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_pic.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_pic.c
@@ -511,7 +511,7 @@
 			irq |= (MPC52xx_IRQ_L1_PERP << MPC52xx_IRQ_L1_OFFSET);
 		}
 	} else {
-		return NO_IRQ;
+		return 0;
 	}
 
 	return irq_linear_revmap(mpc52xx_irqhost, irq);
diff --git a/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c b/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c
index 60e89fc..8b065bd 100644
--- a/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c
+++ b/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c
@@ -131,7 +131,7 @@
 	}
 
 	irq = irq_of_parse_and_map(np, 0);
-	if (irq == NO_IRQ) {
+	if (!irq) {
 		printk(KERN_ERR "No interrupt in pci pic node.\n");
 		of_node_put(np);
 		goto out;
diff --git a/arch/powerpc/platforms/83xx/mpc832x_rdb.c b/arch/powerpc/platforms/83xx/mpc832x_rdb.c
index 2ef03e7..0d6a62f 100644
--- a/arch/powerpc/platforms/83xx/mpc832x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc832x_rdb.c
@@ -89,7 +89,7 @@
 			goto err;
 
 		ret = of_irq_to_resource(np, 0, &res[1]);
-		if (ret == NO_IRQ)
+		if (!ret)
 			goto err;
 
 		pdev = platform_device_alloc("mpc83xx_spi", i);
diff --git a/arch/powerpc/platforms/83xx/suspend.c b/arch/powerpc/platforms/83xx/suspend.c
index fcbea4b..24717d0 100644
--- a/arch/powerpc/platforms/83xx/suspend.c
+++ b/arch/powerpc/platforms/83xx/suspend.c
@@ -352,7 +352,7 @@
 		return -ENODEV;
 
 	pmc_irq = irq_of_parse_and_map(np, 0);
-	if (pmc_irq != NO_IRQ) {
+	if (pmc_irq) {
 		ret = request_irq(pmc_irq, pmc_irq_handler, IRQF_SHARED,
 		                  "pmc", ofdev);
 
@@ -400,7 +400,7 @@
 out_pmc:
 	iounmap(pmc_regs);
 out:
-	if (pmc_irq != NO_IRQ)
+	if (pmc_irq)
 		free_irq(pmc_irq, ofdev);
 
 	return ret;
diff --git a/arch/powerpc/platforms/85xx/common.c b/arch/powerpc/platforms/85xx/common.c
index 28720a4..954e5e8 100644
--- a/arch/powerpc/platforms/85xx/common.c
+++ b/arch/powerpc/platforms/85xx/common.c
@@ -76,7 +76,7 @@
 		return;
 	}
 	irq = irq_of_parse_and_map(np, 0);
-	if (irq == NO_IRQ) {
+	if (!irq) {
 		of_node_put(np);
 		printk(KERN_ERR "PIC init: got no IRQ for cpm cascade\n");
 		return;
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_cds.c b/arch/powerpc/platforms/85xx/mpc85xx_cds.c
index 62f171c..86f2015 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_cds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_cds.c
@@ -196,7 +196,7 @@
 {
 	unsigned int cascade_irq = i8259_irq();
 
-	if (cascade_irq != NO_IRQ)
+	if (cascade_irq)
 		/* handle an interrupt from the 8259 */
 		generic_handle_irq(cascade_irq);
 
@@ -247,7 +247,7 @@
 	}
 
 	cascade_irq = irq_of_parse_and_map(cascade_node, 0);
-	if (cascade_irq == NO_IRQ) {
+	if (!cascade_irq) {
 		printk(KERN_ERR "Failed to map cascade interrupt\n");
 		return -ENXIO;
 	}
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ds.c b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
index 6bc07d8..ed69c7e 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
@@ -51,7 +51,7 @@
 	struct irq_chip *chip = irq_desc_get_chip(desc);
 	unsigned int cascade_irq = i8259_irq();
 
-	if (cascade_irq != NO_IRQ) {
+	if (cascade_irq) {
 		generic_handle_irq(cascade_irq);
 	}
 	chip->irq_eoi(&desc->irq_data);
@@ -96,7 +96,7 @@
 	}
 
 	cascade_irq = irq_of_parse_and_map(cascade_node, 0);
-	if (cascade_irq == NO_IRQ) {
+	if (!cascade_irq) {
 		printk(KERN_ERR "Failed to map cascade interrupt\n");
 		return;
 	}
diff --git a/arch/powerpc/platforms/85xx/socrates_fpga_pic.c b/arch/powerpc/platforms/85xx/socrates_fpga_pic.c
index b02d6a5..82f8490 100644
--- a/arch/powerpc/platforms/85xx/socrates_fpga_pic.c
+++ b/arch/powerpc/platforms/85xx/socrates_fpga_pic.c
@@ -78,7 +78,7 @@
 			break;
 	}
 	if (i == 3)
-		return NO_IRQ;
+		return 0;
 
 	raw_spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
 	cause = socrates_fpga_pic_read(FPGA_PIC_IRQMASK(i));
@@ -103,7 +103,7 @@
 	 */
 	cascade_irq = socrates_fpga_pic_get_irq(irq);
 
-	if (cascade_irq != NO_IRQ)
+	if (cascade_irq)
 		generic_handle_irq(cascade_irq);
 	chip->irq_eoi(&desc->irq_data);
 }
@@ -292,7 +292,7 @@
 
 	for (i = 0; i < 3; i++) {
 		socrates_fpga_irqs[i] = irq_of_parse_and_map(pic, i);
-		if (socrates_fpga_irqs[i] == NO_IRQ) {
+		if (!socrates_fpga_irqs[i]) {
 			pr_warning("FPGA PIC: can't get irq%d.\n", i);
 			continue;
 		}
diff --git a/arch/powerpc/platforms/86xx/pic.c b/arch/powerpc/platforms/86xx/pic.c
index 845defa..a6c695f 100644
--- a/arch/powerpc/platforms/86xx/pic.c
+++ b/arch/powerpc/platforms/86xx/pic.c
@@ -22,7 +22,7 @@
 	struct irq_chip *chip = irq_desc_get_chip(desc);
 	unsigned int cascade_irq = i8259_irq();
 
-	if (cascade_irq != NO_IRQ)
+	if (cascade_irq)
 		generic_handle_irq(cascade_irq);
 
 	chip->irq_eoi(&desc->irq_data);
@@ -58,7 +58,7 @@
 	}
 
 	cascade_irq = irq_of_parse_and_map(cascade_node, 0);
-	if (cascade_irq == NO_IRQ) {
+	if (!cascade_irq) {
 		printk(KERN_ERR "Failed to map cascade interrupt\n");
 		return;
 	}
diff --git a/arch/powerpc/platforms/8xx/m8xx_setup.c b/arch/powerpc/platforms/8xx/m8xx_setup.c
index b1ab6e9..f81069f 100644
--- a/arch/powerpc/platforms/8xx/m8xx_setup.c
+++ b/arch/powerpc/platforms/8xx/m8xx_setup.c
@@ -241,6 +241,6 @@
 	}
 
 	irq = cpm_pic_init();
-	if (irq != NO_IRQ)
+	if (irq)
 		irq_set_chained_handler(irq, cpm_cascade);
 }
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index f32edec..ca2da30 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -74,6 +74,7 @@
 	select HAVE_ARCH_TRANSPARENT_HUGEPAGE
 	select ARCH_SUPPORTS_NUMA_BALANCING
 	select IRQ_WORK
+	select HAVE_KERNEL_XZ
 
 config PPC_BOOK3E_64
 	bool "Embedded processors"
@@ -86,6 +87,7 @@
 choice
 	prompt "CPU selection"
 	depends on PPC64
+	default POWER8_CPU if CPU_LITTLE_ENDIAN
 	default GENERIC_CPU
 	help
 	  This will create a kernel which is optimised for a particular CPU.
diff --git a/arch/powerpc/platforms/cell/axon_msi.c b/arch/powerpc/platforms/cell/axon_msi.c
index aed7714..8b55c5f 100644
--- a/arch/powerpc/platforms/cell/axon_msi.c
+++ b/arch/powerpc/platforms/cell/axon_msi.c
@@ -271,7 +271,7 @@
 
 	for_each_pci_msi_entry(entry, dev) {
 		virq = irq_create_direct_mapping(msic->irq_domain);
-		if (virq == NO_IRQ) {
+		if (!virq) {
 			dev_warn(&dev->dev,
 				 "axon_msi: virq allocation failed!\n");
 			return -1;
@@ -293,7 +293,7 @@
 	dev_dbg(&dev->dev, "axon_msi: tearing down msi irqs\n");
 
 	for_each_pci_msi_entry(entry, dev) {
-		if (entry->irq == NO_IRQ)
+		if (!entry->irq)
 			continue;
 
 		irq_set_msi_desc(entry->irq, NULL);
@@ -375,7 +375,7 @@
 	}
 
 	virq = irq_of_parse_and_map(dn, 0);
-	if (virq == NO_IRQ) {
+	if (!virq) {
 		printk(KERN_ERR "axon_msi: irq parse and map failed for %s\n",
 		       dn->full_name);
 		goto out_free_fifo;
diff --git a/arch/powerpc/platforms/cell/cbe_regs.c b/arch/powerpc/platforms/cell/cbe_regs.c
index 1428d58..b926438d 100644
--- a/arch/powerpc/platforms/cell/cbe_regs.c
+++ b/arch/powerpc/platforms/cell/cbe_regs.c
@@ -189,7 +189,7 @@
 	return NULL;
 }
 
-void __init cbe_fill_regs_map(struct cbe_regs_map *map)
+static void __init cbe_fill_regs_map(struct cbe_regs_map *map)
 {
 	if(map->be_node) {
 		struct device_node *be, *np;
diff --git a/arch/powerpc/platforms/cell/interrupt.c b/arch/powerpc/platforms/cell/interrupt.c
index 9f609fc..a6bbbab 100644
--- a/arch/powerpc/platforms/cell/interrupt.c
+++ b/arch/powerpc/platforms/cell/interrupt.c
@@ -123,7 +123,7 @@
 				unsigned int cirq =
 					irq_linear_revmap(iic_host,
 							  base | cascade);
-				if (cirq != NO_IRQ)
+				if (cirq)
 					generic_handle_irq(cirq);
 			}
 		/* post-ack level interrupts */
@@ -153,10 +153,10 @@
 	*(unsigned long *) &pending =
 		in_be64((u64 __iomem *) &iic->regs->pending_destr);
 	if (!(pending.flags & CBE_IIC_IRQ_VALID))
-		return NO_IRQ;
+		return 0;
 	virq = irq_linear_revmap(iic_host, iic_pending_to_hwnum(pending));
-	if (virq == NO_IRQ)
-		return NO_IRQ;
+	if (!virq)
+		return 0;
 	iic->eoi_stack[++iic->eoi_ptr] = pending.prio;
 	BUG_ON(iic->eoi_ptr > 15);
 	return virq;
@@ -187,18 +187,12 @@
 	out_be64(&per_cpu(cpu_iic, cpu).regs->generate, (0xf - msg) << 4);
 }
 
-struct irq_domain *iic_get_irq_host(int node)
-{
-	return iic_host;
-}
-EXPORT_SYMBOL_GPL(iic_get_irq_host);
-
 static void iic_request_ipi(int msg)
 {
 	int virq;
 
 	virq = irq_create_mapping(iic_host, iic_msg_to_irq(msg));
-	if (virq == NO_IRQ) {
+	if (!virq) {
 		printk(KERN_ERR
 		       "iic: failed to map IPI %s\n", smp_ipi_name[msg]);
 		return;
@@ -353,7 +347,7 @@
 		cascade |= 1 << IIC_IRQ_CLASS_SHIFT;
 		cascade |= IIC_UNIT_IIC;
 		cascade = irq_create_mapping(iic_host, cascade);
-		if (cascade == NO_IRQ)
+		if (!cascade)
 			continue;
 		/*
 		 * irq_data is a generic pointer that gets passed back
diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c
index f7d1a49..7ff51f9 100644
--- a/arch/powerpc/platforms/cell/iommu.c
+++ b/arch/powerpc/platforms/cell/iommu.c
@@ -411,7 +411,7 @@
 
 	virq = irq_create_mapping(NULL,
 			IIC_IRQ_IOEX_ATI | (iommu->nid << IIC_IRQ_NODE_SHIFT));
-	BUG_ON(virq == NO_IRQ);
+	BUG_ON(!virq);
 
 	ret = request_irq(virq, ioc_interrupt, 0, iommu->name, iommu);
 	BUG_ON(ret);
@@ -651,7 +651,7 @@
 
 static int dma_set_mask_and_switch(struct device *dev, u64 dma_mask);
 
-struct dma_map_ops dma_iommu_fixed_ops = {
+static struct dma_map_ops dma_iommu_fixed_ops = {
 	.alloc          = dma_fixed_alloc_coherent,
 	.free           = dma_fixed_free_coherent,
 	.map_sg         = dma_fixed_map_sg,
diff --git a/arch/powerpc/platforms/cell/pmu.c b/arch/powerpc/platforms/cell/pmu.c
index 348a27b..e3ad0c3 100644
--- a/arch/powerpc/platforms/cell/pmu.c
+++ b/arch/powerpc/platforms/cell/pmu.c
@@ -385,7 +385,7 @@
 	for_each_online_node(node) {
 		irq = irq_create_mapping(NULL, IIC_IRQ_IOEX_PMI |
 					       (node << IIC_IRQ_NODE_SHIFT));
-		if (irq == NO_IRQ) {
+		if (!irq) {
 			printk("ERROR: Unable to allocate irq for node %d\n",
 			       node);
 			return -EINVAL;
@@ -412,7 +412,7 @@
 			       IIC_IRQ_IOEX_PMI
 			       | (node << IIC_IRQ_NODE_SHIFT));
 
-	if (irq == NO_IRQ) {
+	if (!irq) {
 		printk(KERN_WARNING "ERROR, unable to get existing irq %d " \
 		"for node %d\n", irq, node);
 		return;
diff --git a/arch/powerpc/platforms/cell/ras.c b/arch/powerpc/platforms/cell/ras.c
index 2d4f60c..460ab39 100644
--- a/arch/powerpc/platforms/cell/ras.c
+++ b/arch/powerpc/platforms/cell/ras.c
@@ -298,7 +298,7 @@
 }
 #endif /* CONFIG_PPC_IBM_CELL_RESETBUTTON */
 
-int __init cbe_ptcal_init(void)
+static int __init cbe_ptcal_init(void)
 {
 	int ret;
 	ptcal_start_tok = rtas_token("ibm,cbe-start-ptcal");
diff --git a/arch/powerpc/platforms/cell/spider-pic.c b/arch/powerpc/platforms/cell/spider-pic.c
index d06dcac..ff924af 100644
--- a/arch/powerpc/platforms/cell/spider-pic.c
+++ b/arch/powerpc/platforms/cell/spider-pic.c
@@ -207,11 +207,11 @@
 
 	cs = in_be32(pic->regs + TIR_CS) >> 24;
 	if (cs == SPIDER_IRQ_INVALID)
-		virq = NO_IRQ;
+		virq = 0;
 	else
 		virq = irq_linear_revmap(pic->host, cs);
 
-	if (virq != NO_IRQ)
+	if (virq)
 		generic_handle_irq(virq);
 
 	chip->irq_eoi(&desc->irq_data);
@@ -245,19 +245,19 @@
 	/* Now do the horrible hacks */
 	tmp = of_get_property(of_node, "#interrupt-cells", NULL);
 	if (tmp == NULL)
-		return NO_IRQ;
+		return 0;
 	intsize = *tmp;
 	imap = of_get_property(of_node, "interrupt-map", &imaplen);
 	if (imap == NULL || imaplen < (intsize + 1))
-		return NO_IRQ;
+		return 0;
 	iic = of_find_node_by_phandle(imap[intsize]);
 	if (iic == NULL)
-		return NO_IRQ;
+		return 0;
 	imap += intsize + 1;
 	tmp = of_get_property(iic, "#interrupt-cells", NULL);
 	if (tmp == NULL) {
 		of_node_put(iic);
-		return NO_IRQ;
+		return 0;
 	}
 	intsize = *tmp;
 	/* Assume unit is last entry of interrupt specifier */
@@ -266,7 +266,7 @@
 	tmp = of_get_property(iic, "ibm,interrupt-server-ranges", NULL);
 	if (tmp == NULL) {
 		of_node_put(iic);
-		return NO_IRQ;
+		return 0;
 	}
 	/* ugly as hell but works for now */
 	pic->node_id = (*tmp) >> 1;
@@ -281,7 +281,7 @@
 				  (pic->node_id << IIC_IRQ_NODE_SHIFT) |
 				  (2 << IIC_IRQ_CLASS_SHIFT) |
 				  unit);
-	if (virq == NO_IRQ)
+	if (!virq)
 		printk(KERN_ERR "spider_pic: failed to map cascade !");
 	return virq;
 }
@@ -318,7 +318,7 @@
 
 	/* Hook up the cascade interrupt to the iic and nodeid */
 	virq = spider_find_cascade_and_node(pic);
-	if (virq == NO_IRQ)
+	if (!virq)
 		return;
 	irq_set_handler_data(virq, pic);
 	irq_set_chained_handler(virq, spider_irq_cascade);
diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c
index bb4a8e07..e84d8fb 100644
--- a/arch/powerpc/platforms/cell/spu_base.c
+++ b/arch/powerpc/platforms/cell/spu_base.c
@@ -402,7 +402,7 @@
 {
 	int ret = 0;
 
-	if (spu->irqs[0] != NO_IRQ) {
+	if (spu->irqs[0]) {
 		snprintf(spu->irq_c0, sizeof (spu->irq_c0), "spe%02d.0",
 			 spu->number);
 		ret = request_irq(spu->irqs[0], spu_irq_class_0,
@@ -410,7 +410,7 @@
 		if (ret)
 			goto bail0;
 	}
-	if (spu->irqs[1] != NO_IRQ) {
+	if (spu->irqs[1]) {
 		snprintf(spu->irq_c1, sizeof (spu->irq_c1), "spe%02d.1",
 			 spu->number);
 		ret = request_irq(spu->irqs[1], spu_irq_class_1,
@@ -418,7 +418,7 @@
 		if (ret)
 			goto bail1;
 	}
-	if (spu->irqs[2] != NO_IRQ) {
+	if (spu->irqs[2]) {
 		snprintf(spu->irq_c2, sizeof (spu->irq_c2), "spe%02d.2",
 			 spu->number);
 		ret = request_irq(spu->irqs[2], spu_irq_class_2,
@@ -429,10 +429,10 @@
 	return 0;
 
 bail2:
-	if (spu->irqs[1] != NO_IRQ)
+	if (spu->irqs[1])
 		free_irq(spu->irqs[1], spu);
 bail1:
-	if (spu->irqs[0] != NO_IRQ)
+	if (spu->irqs[0])
 		free_irq(spu->irqs[0], spu);
 bail0:
 	return ret;
@@ -440,11 +440,11 @@
 
 static void spu_free_irqs(struct spu *spu)
 {
-	if (spu->irqs[0] != NO_IRQ)
+	if (spu->irqs[0])
 		free_irq(spu->irqs[0], spu);
-	if (spu->irqs[1] != NO_IRQ)
+	if (spu->irqs[1])
 		free_irq(spu->irqs[1], spu);
-	if (spu->irqs[2] != NO_IRQ)
+	if (spu->irqs[2])
 		free_irq(spu->irqs[2], spu);
 }
 
diff --git a/arch/powerpc/platforms/cell/spu_manage.c b/arch/powerpc/platforms/cell/spu_manage.c
index 21b4bfb..672d310 100644
--- a/arch/powerpc/platforms/cell/spu_manage.c
+++ b/arch/powerpc/platforms/cell/spu_manage.c
@@ -105,7 +105,10 @@
 	spu->irqs[2] = irq_create_mapping(NULL, IIC_IRQ_CLASS_2 | isrc);
 
 	/* Right now, we only fail if class 2 failed */
-	return spu->irqs[2] == NO_IRQ ? -EINVAL : 0;
+	if (!spu->irqs[2])
+		return -EINVAL;
+
+	return 0;
 }
 
 static void __iomem * __init spu_map_prop_old(struct spu *spu,
@@ -191,7 +194,7 @@
 		pr_debug("  irq %d no 0x%x on %s\n", i, oirq.args[0],
 			 oirq.np->full_name);
 		spu->irqs[i] = irq_create_of_mapping(&oirq);
-		if (spu->irqs[i] == NO_IRQ) {
+		if (!spu->irqs[i]) {
 			pr_debug("spu_new: failed to map it !\n");
 			goto err;
 		}
@@ -202,7 +205,7 @@
 	pr_debug("failed to map irq %x for spu %s\n", *oirq.args,
 		spu->name);
 	for (; i >= 0; i--) {
-		if (spu->irqs[i] != NO_IRQ)
+		if (spu->irqs[i])
 			irq_dispose_mapping(spu->irqs[i]);
 	}
 	return ret;
diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c
index bfb3006..0ce1b45 100644
--- a/arch/powerpc/platforms/chrp/setup.c
+++ b/arch/powerpc/platforms/chrp/setup.c
@@ -368,7 +368,7 @@
 	struct irq_chip *chip = irq_desc_get_chip(desc);
 	unsigned int cascade_irq = i8259_irq();
 
-	if (cascade_irq != NO_IRQ)
+	if (cascade_irq)
 		generic_handle_irq(cascade_irq);
 
 	chip->irq_eoi(&desc->irq_data);
@@ -514,7 +514,7 @@
 	}
 	if (chrp_mpic != NULL) {
 		cascade_irq = irq_of_parse_and_map(pic, 0);
-		if (cascade_irq == NO_IRQ)
+		if (!cascade_irq)
 			printk(KERN_ERR "i8259: failed to map cascade irq\n");
 		else
 			irq_set_chained_handler(cascade_irq,
diff --git a/arch/powerpc/platforms/embedded6xx/flipper-pic.c b/arch/powerpc/platforms/embedded6xx/flipper-pic.c
index b7866e0..ade8382 100644
--- a/arch/powerpc/platforms/embedded6xx/flipper-pic.c
+++ b/arch/powerpc/platforms/embedded6xx/flipper-pic.c
@@ -181,7 +181,7 @@
 	irq_status = in_be32(io_base + FLIPPER_ICR) &
 		     in_be32(io_base + FLIPPER_IMR);
 	if (irq_status == 0)
-		return NO_IRQ;	/* no more IRQs pending */
+		return 0;	/* no more IRQs pending */
 
 	irq = __ffs(irq_status);
 	return irq_linear_revmap(flipper_irq_host, irq);
diff --git a/arch/powerpc/platforms/embedded6xx/hlwd-pic.c b/arch/powerpc/platforms/embedded6xx/hlwd-pic.c
index 9b79757..89c54de 100644
--- a/arch/powerpc/platforms/embedded6xx/hlwd-pic.c
+++ b/arch/powerpc/platforms/embedded6xx/hlwd-pic.c
@@ -114,7 +114,7 @@
 	irq_status = in_be32(io_base + HW_BROADWAY_ICR) &
 		     in_be32(io_base + HW_BROADWAY_IMR);
 	if (irq_status == 0)
-		return NO_IRQ;	/* no more IRQs pending */
+		return 0;	/* no more IRQs pending */
 
 	irq = __ffs(irq_status);
 	return irq_linear_revmap(h, irq);
@@ -131,7 +131,7 @@
 	raw_spin_unlock(&desc->lock);
 
 	virq = __hlwd_pic_get_irq(irq_domain);
-	if (virq != NO_IRQ)
+	if (virq)
 		generic_handle_irq(virq);
 	else
 		pr_err("spurious interrupt!\n");
diff --git a/arch/powerpc/platforms/embedded6xx/mvme5100.c b/arch/powerpc/platforms/embedded6xx/mvme5100.c
index ed7321d..8e35909 100644
--- a/arch/powerpc/platforms/embedded6xx/mvme5100.c
+++ b/arch/powerpc/platforms/embedded6xx/mvme5100.c
@@ -47,7 +47,7 @@
 	struct irq_chip *chip = irq_desc_get_chip(desc);
 	unsigned int cascade_irq = i8259_irq();
 
-	if (cascade_irq != NO_IRQ)
+	if (cascade_irq)
 		generic_handle_irq(cascade_irq);
 
 	chip->irq_eoi(&desc->irq_data);
@@ -84,7 +84,7 @@
 	}
 
 	cirq = irq_of_parse_and_map(cp, 0);
-	if (cirq == NO_IRQ) {
+	if (!cirq) {
 		pr_warn("mvme5100_pic_init: no cascade interrupt?\n");
 		return;
 	}
diff --git a/arch/powerpc/platforms/maple/pci.c b/arch/powerpc/platforms/maple/pci.c
index a2f89e6..a0589aa 100644
--- a/arch/powerpc/platforms/maple/pci.c
+++ b/arch/powerpc/platforms/maple/pci.c
@@ -552,7 +552,7 @@
 	    pci_bus_to_host(dev->bus) == u4_pcie) {
 		printk(KERN_DEBUG "Fixup U4 PCIe IRQ\n");
 		dev->irq = irq_create_mapping(NULL, 1);
-		if (dev->irq != NO_IRQ)
+		if (dev->irq)
 			irq_set_irq_type(dev->irq, IRQ_TYPE_LEVEL_LOW);
 	}
 
@@ -562,7 +562,7 @@
 	if (dev->vendor == PCI_VENDOR_ID_AMD &&
 	    dev->device == PCI_DEVICE_ID_AMD_8111_IDE &&
 	    (dev->class & 5) != 5) {
-		dev->irq = NO_IRQ;
+		dev->irq = 0;
 	}
 
 	DBG(" <- maple_pci_irq_fixup\n");
@@ -648,7 +648,7 @@
 		return defirq;
 	}
 	irq = irq_of_parse_and_map(np, channel & 0x1);
-	if (irq == NO_IRQ) {
+	if (!irq) {
 		printk("Failed to map onboard IDE interrupt for channel %d\n",
 		       channel);
 		return defirq;
diff --git a/arch/powerpc/platforms/maple/setup.c b/arch/powerpc/platforms/maple/setup.c
index 3c30c7a..b7f9375 100644
--- a/arch/powerpc/platforms/maple/setup.c
+++ b/arch/powerpc/platforms/maple/setup.c
@@ -156,7 +156,7 @@
 }
 
 #ifdef CONFIG_SMP
-struct smp_ops_t maple_smp_ops = {
+static struct smp_ops_t maple_smp_ops = {
 	.probe		= smp_mpic_probe,
 	.message_pass	= smp_mpic_message_pass,
 	.kick_cpu	= smp_generic_kick_cpu,
@@ -176,7 +176,7 @@
 	}
 }
 
-void __init maple_setup_arch(void)
+static void __init maple_setup_arch(void)
 {
 	/* init to some ~sane value until calibrate_delay() runs */
 	loops_per_jiffy = 50000000;
diff --git a/arch/powerpc/platforms/pasemi/Kconfig b/arch/powerpc/platforms/pasemi/Kconfig
index 00d4b28..c7f1dbe 100644
--- a/arch/powerpc/platforms/pasemi/Kconfig
+++ b/arch/powerpc/platforms/pasemi/Kconfig
@@ -14,6 +14,16 @@
 menu "PA Semi PWRficient options"
 	depends on PPC_PASEMI
 
+config PPC_PASEMI_NEMO
+	bool "Nemo motherboard Support"
+	depends on PPC_PASEMI
+	select PPC_I8259
+	help
+	  This option enables support for the 'Nemo' motherboard
+	  used in A-Eons's Amigaone X1000. This consists of some
+	  device tree patches and workarounds for the SB600 South
+	  Bridge that provides SATA/USB/Audio.
+
 config PPC_PASEMI_IOMMU
 	bool "PA Semi IOMMU support"
 	depends on PPC_PASEMI
diff --git a/arch/powerpc/platforms/pasemi/gpio_mdio.c b/arch/powerpc/platforms/pasemi/gpio_mdio.c
index ddf6350..c23e609 100644
--- a/arch/powerpc/platforms/pasemi/gpio_mdio.c
+++ b/arch/powerpc/platforms/pasemi/gpio_mdio.c
@@ -306,7 +306,7 @@
 	},
 };
 
-int gpio_mdio_init(void)
+static int gpio_mdio_init(void)
 {
 	struct device_node *np;
 
@@ -326,7 +326,7 @@
 }
 module_init(gpio_mdio_init);
 
-void gpio_mdio_exit(void)
+static void gpio_mdio_exit(void)
 {
 	platform_driver_unregister(&gpio_mdio_driver);
 	if (gpio_regs)
diff --git a/arch/powerpc/platforms/pasemi/iommu.c b/arch/powerpc/platforms/pasemi/iommu.c
index c61667e..e74adc4 100644
--- a/arch/powerpc/platforms/pasemi/iommu.c
+++ b/arch/powerpc/platforms/pasemi/iommu.c
@@ -199,7 +199,7 @@
 	set_iommu_table_base(&dev->dev, &iommu_table_iobmap);
 }
 
-int __init iob_init(struct device_node *dn)
+static int __init iob_init(struct device_node *dn)
 {
 	unsigned long tmp;
 	u32 regword;
diff --git a/arch/powerpc/platforms/pasemi/misc.c b/arch/powerpc/platforms/pasemi/misc.c
index e0ab299..8571e7b 100644
--- a/arch/powerpc/platforms/pasemi/misc.c
+++ b/arch/powerpc/platforms/pasemi/misc.c
@@ -76,7 +76,7 @@
 			}
 
 			info.irq = irq_of_parse_and_map(node, 0);
-			if (info.irq == NO_IRQ)
+			if (!info.irq)
 				info.irq = -1;
 
 			if (find_i2c_driver(node, &info) < 0)
diff --git a/arch/powerpc/platforms/pasemi/msi.c b/arch/powerpc/platforms/pasemi/msi.c
index d9af763..d9cd510 100644
--- a/arch/powerpc/platforms/pasemi/msi.c
+++ b/arch/powerpc/platforms/pasemi/msi.c
@@ -68,7 +68,7 @@
 	pr_debug("pasemi_msi_teardown_msi_irqs, pdev %p\n", pdev);
 
 	for_each_pci_msi_entry(entry, pdev) {
-		if (entry->irq == NO_IRQ)
+		if (!entry->irq)
 			continue;
 
 		hwirq = virq_to_hw(entry->irq);
@@ -109,7 +109,7 @@
 		}
 
 		virq = irq_create_mapping(msi_mpic->irqhost, hwirq);
-		if (virq == NO_IRQ) {
+		if (!virq) {
 			pr_debug("pasemi_msi: failed mapping hwirq 0x%x\n",
 				  hwirq);
 			msi_bitmap_free_hwirqs(&msi_mpic->msi_bitmap, hwirq,
diff --git a/arch/powerpc/platforms/pasemi/setup.c b/arch/powerpc/platforms/pasemi/setup.c
index e86c1bd..3182400 100644
--- a/arch/powerpc/platforms/pasemi/setup.c
+++ b/arch/powerpc/platforms/pasemi/setup.c
@@ -59,7 +59,7 @@
 
 static struct mce_regs mce_regs[MAX_MCE_REGS];
 static int num_mce_regs;
-static int nmi_virq = NO_IRQ;
+static int nmi_virq = 0;
 
 
 static void __noreturn pas_restart(char *cmd)
@@ -105,7 +105,7 @@
 	arch_spin_unlock(&timebase_lock);
 }
 
-struct smp_ops_t pas_smp_ops = {
+static struct smp_ops_t pas_smp_ops = {
 	.probe		= smp_mpic_probe,
 	.message_pass	= smp_mpic_message_pass,
 	.kick_cpu	= smp_generic_kick_cpu,
@@ -115,7 +115,7 @@
 };
 #endif /* CONFIG_SMP */
 
-void __init pas_setup_arch(void)
+static void __init pas_setup_arch(void)
 {
 #ifdef CONFIG_SMP
 	/* Setup SMP callback */
@@ -264,7 +264,7 @@
 	srr0 = regs->nip;
 	srr1 = regs->msr;
 
-	if (nmi_virq != NO_IRQ && mpic_get_mcirq() == nmi_virq) {
+	if (nmi_virq && mpic_get_mcirq() == nmi_virq) {
 		printk(KERN_ERR "NMI delivered\n");
 		debugger(regs);
 		mpic_end_irq(irq_get_irq_data(nmi_virq));
diff --git a/arch/powerpc/platforms/powermac/low_i2c.c b/arch/powerpc/platforms/powermac/low_i2c.c
index 6d6f277..c8c217b 100644
--- a/arch/powerpc/platforms/powermac/low_i2c.c
+++ b/arch/powerpc/platforms/powermac/low_i2c.c
@@ -401,7 +401,7 @@
 {
 	struct pmac_i2c_host_kw *host = bus->hostdata;
 	u8 mode_reg = host->speed;
-	int use_irq = host->irq != NO_IRQ && !bus->polled;
+	int use_irq = host->irq && !bus->polled;
 
 	/* Setup mode & subaddress if any */
 	switch(bus->mode) {
@@ -535,7 +535,7 @@
 		break;
 	}	
 	host->irq = irq_of_parse_and_map(np, 0);
-	if (host->irq == NO_IRQ)
+	if (!host->irq)
 		printk(KERN_WARNING
 		       "low_i2c: Failed to map interrupt for %s\n",
 		       np->full_name);
@@ -557,7 +557,7 @@
 	 */
 	if (request_irq(host->irq, kw_i2c_irq, IRQF_NO_SUSPEND,
 			"keywest i2c", host))
-		host->irq = NO_IRQ;
+		host->irq = 0;
 
 	printk(KERN_INFO "KeyWest i2c @0x%08x irq %d %s\n",
 	       *addrp, host->irq, np->full_name);
diff --git a/arch/powerpc/platforms/powermac/pfunc_base.c b/arch/powerpc/platforms/powermac/pfunc_base.c
index e49d07f..459138e 100644
--- a/arch/powerpc/platforms/powermac/pfunc_base.c
+++ b/arch/powerpc/platforms/powermac/pfunc_base.c
@@ -26,7 +26,7 @@
 static int macio_do_gpio_irq_enable(struct pmf_function *func)
 {
 	unsigned int irq = irq_of_parse_and_map(func->node, 0);
-	if (irq == NO_IRQ)
+	if (!irq)
 		return -EINVAL;
 	return request_irq(irq, macio_gpio_irq, 0, func->node->name, func);
 }
@@ -34,7 +34,7 @@
 static int macio_do_gpio_irq_disable(struct pmf_function *func)
 {
 	unsigned int irq = irq_of_parse_and_map(func->node, 0);
-	if (irq == NO_IRQ)
+	if (!irq)
 		return -EINVAL;
 	free_irq(irq, func);
 	return 0;
diff --git a/arch/powerpc/platforms/powermac/pfunc_core.c b/arch/powerpc/platforms/powermac/pfunc_core.c
index 4307508..695e8c4 100644
--- a/arch/powerpc/platforms/powermac/pfunc_core.c
+++ b/arch/powerpc/platforms/powermac/pfunc_core.c
@@ -804,7 +804,7 @@
 }
 EXPORT_SYMBOL_GPL(pmf_unregister_driver);
 
-struct pmf_function *__pmf_find_function(struct device_node *target,
+static struct pmf_function *__pmf_find_function(struct device_node *target,
 					 const char *name, u32 flags)
 {
 	struct device_node *actor = of_node_get(target);
diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c
index 9815463..f5f9ad7 100644
--- a/arch/powerpc/platforms/powermac/pic.c
+++ b/arch/powerpc/platforms/powermac/pic.c
@@ -251,7 +251,7 @@
 	}
 	raw_spin_unlock_irqrestore(&pmac_pic_lock, flags);
 	if (unlikely(irq < 0))
-		return NO_IRQ;
+		return 0;
 	return irq_linear_revmap(pmac_pic_host, irq);
 }
 
@@ -389,7 +389,7 @@
 		out_le32(&pmac_irq_hw[i]->enable, 0);
 
 	/* Hookup cascade irq */
-	if (slave && pmac_irq_cascade != NO_IRQ)
+	if (slave && pmac_irq_cascade)
 		setup_irq(pmac_irq_cascade, &gatwick_cascade_action);
 
 	printk(KERN_INFO "irq: System has %d possible interrupts\n", max_irqs);
@@ -444,7 +444,7 @@
 	pswitch = of_find_node_by_name(NULL, "programmer-switch");
 	if (pswitch) {
 		nmi_irq = irq_of_parse_and_map(pswitch, 0);
-		if (nmi_irq != NO_IRQ) {
+		if (nmi_irq) {
 			mpic_irq_set_priority(nmi_irq, 9);
 			setup_irq(nmi_irq, &xmon_action);
 		}
diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c
index 366e4f5..c9eb7d6 100644
--- a/arch/powerpc/platforms/powermac/smp.c
+++ b/arch/powerpc/platforms/powermac/smp.c
@@ -979,7 +979,7 @@
 #endif /* CONFIG_HOTPLUG_CPU */
 
 /* Core99 Macs (dual G4s and G5s) */
-struct smp_ops_t core99_smp_ops = {
+static struct smp_ops_t core99_smp_ops = {
 	.message_pass	= smp_mpic_message_pass,
 	.probe		= smp_core99_probe,
 #ifdef CONFIG_PPC64
diff --git a/arch/powerpc/platforms/powernv/eeh-powernv.c b/arch/powerpc/platforms/powernv/eeh-powernv.c
index 86544ea..2354ea5 100644
--- a/arch/powerpc/platforms/powernv/eeh-powernv.c
+++ b/arch/powerpc/platforms/powernv/eeh-powernv.c
@@ -763,7 +763,8 @@
 	 * reset followed by hot reset on root bus. So we also
 	 * need the PCI bus settlement delay.
 	 */
-	rc = pnv_eeh_poll(phb->opal_id);
+	if (rc > 0)
+		rc = pnv_eeh_poll(phb->opal_id);
 	if (option == EEH_RESET_DEACTIVATE) {
 		if (system_state < SYSTEM_RUNNING)
 			udelay(1000 * EEH_PE_RST_SETTLE_TIME);
@@ -806,7 +807,8 @@
 		goto out;
 
 	/* Poll state of the PHB until the request is done */
-	rc = pnv_eeh_poll(phb->opal_id);
+	if (rc > 0)
+		rc = pnv_eeh_poll(phb->opal_id);
 	if (option == EEH_RESET_DEACTIVATE)
 		msleep(EEH_PE_RST_SETTLE_TIME);
 out:
@@ -1090,10 +1092,16 @@
 		}
 	}
 
-	bus = eeh_pe_bus_get(pe);
 	if (pe->type & EEH_PE_VF)
 		return pnv_eeh_reset_vf_pe(pe, option);
 
+	bus = eeh_pe_bus_get(pe);
+	if (!bus) {
+		pr_err("%s: Cannot find PCI bus for PHB#%d-PE#%x\n",
+			__func__, pe->phb->global_number, pe->addr);
+		return -EIO;
+	}
+
 	if (pci_is_root_bus(bus) ||
 	    pci_is_root_bus(bus->parent))
 		return pnv_eeh_root_reset(hose, option);
@@ -1306,7 +1314,7 @@
 		return;
 	}
 
-	switch (data->type) {
+	switch (be16_to_cpu(data->type)) {
 	case OPAL_P7IOC_DIAG_TYPE_RGC:
 		pr_info("P7IOC diag-data for RGC\n\n");
 		pnv_eeh_dump_hub_diag_common(data);
@@ -1538,7 +1546,7 @@
 
 				/* Try best to clear it */
 				opal_pci_eeh_freeze_clear(phb->opal_id,
-					frozen_pe_no,
+					be64_to_cpu(frozen_pe_no),
 					OPAL_EEH_ACTION_CLEAR_FREEZE_ALL);
 				ret = EEH_NEXT_ERR_NONE;
 			} else if ((*pe)->state & EEH_PE_ISOLATED ||
diff --git a/arch/powerpc/platforms/powernv/npu-dma.c b/arch/powerpc/platforms/powernv/npu-dma.c
index 00e1a01..aec85e7 100644
--- a/arch/powerpc/platforms/powernv/npu-dma.c
+++ b/arch/powerpc/platforms/powernv/npu-dma.c
@@ -115,7 +115,7 @@
 	return 0;
 }
 
-struct dma_map_ops dma_npu_ops = {
+static struct dma_map_ops dma_npu_ops = {
 	.map_page		= dma_npu_map_page,
 	.map_sg			= dma_npu_map_sg,
 	.alloc			= dma_npu_alloc,
diff --git a/arch/powerpc/platforms/powernv/opal-irqchip.c b/arch/powerpc/platforms/powernv/opal-irqchip.c
index ed8bba6..998316b 100644
--- a/arch/powerpc/platforms/powernv/opal-irqchip.c
+++ b/arch/powerpc/platforms/powernv/opal-irqchip.c
@@ -222,7 +222,7 @@
 		/* Get hardware and virtual IRQ */
 		irq = be32_to_cpup(irqs);
 		virq = irq_create_mapping(NULL, irq);
-		if (virq == NO_IRQ) {
+		if (!virq) {
 			pr_warn("Failed to map irq 0x%x\n", irq);
 			continue;
 		}
@@ -260,7 +260,7 @@
 int opal_event_request(unsigned int opal_event_nr)
 {
 	if (WARN_ON_ONCE(!opal_event_irqchip.domain))
-		return NO_IRQ;
+		return 0;
 
 	return irq_create_mapping(opal_event_irqchip.domain, opal_event_nr);
 }
diff --git a/arch/powerpc/platforms/powernv/pci-cxl.c b/arch/powerpc/platforms/powernv/pci-cxl.c
index 1349a09..94498a0 100644
--- a/arch/powerpc/platforms/powernv/pci-cxl.c
+++ b/arch/powerpc/platforms/powernv/pci-cxl.c
@@ -344,7 +344,7 @@
 			return (hwirq ? hwirq : -ENOMEM);
 
 		virq = irq_create_mapping(NULL, hwirq);
-		if (virq == NO_IRQ) {
+		if (!virq) {
 			pr_warn("%s: Failed to map cxl mode MSI to linux irq\n",
 				pci_name(pdev));
 			return -ENOMEM;
@@ -374,7 +374,7 @@
 		return;
 
 	for_each_pci_msi_entry(entry, pdev) {
-		if (entry->irq == NO_IRQ)
+		if (!entry->irq)
 			continue;
 		hwirq = virq_to_hw(entry->irq);
 		irq_set_msi_desc(entry->irq, NULL);
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index d314ecc..d4b33dd 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -133,9 +133,22 @@
 
 static struct pnv_ioda_pe *pnv_ioda_init_pe(struct pnv_phb *phb, int pe_no)
 {
+	s64 rc;
+
 	phb->ioda.pe_array[pe_no].phb = phb;
 	phb->ioda.pe_array[pe_no].pe_number = pe_no;
 
+	/*
+	 * Clear the PE frozen state as it might be put into frozen state
+	 * in the last PCI remove path. It's not harmful to do so when the
+	 * PE is already in unfrozen state.
+	 */
+	rc = opal_pci_eeh_freeze_clear(phb->opal_id, pe_no,
+				       OPAL_EEH_ACTION_CLEAR_FREEZE_ALL);
+	if (rc != OPAL_SUCCESS)
+		pr_warn("%s: Error %lld unfreezing PHB#%d-PE#%d\n",
+			__func__, rc, phb->hose->global_number, pe_no);
+
 	return &phb->ioda.pe_array[pe_no];
 }
 
@@ -417,7 +430,7 @@
 	struct device_node *dn = hose->dn;
 	struct resource *res;
 	u32 m64_range[2], i;
-	const u32 *r;
+	const __be32 *r;
 	u64 pci_addr;
 
 	if (phb->type != PNV_PHB_IODA1 && phb->type != PNV_PHB_IODA2) {
@@ -3049,6 +3062,38 @@
 	}
 }
 
+#ifdef CONFIG_DEBUG_FS
+static int pnv_pci_diag_data_set(void *data, u64 val)
+{
+	struct pci_controller *hose;
+	struct pnv_phb *phb;
+	s64 ret;
+
+	if (val != 1ULL)
+		return -EINVAL;
+
+	hose = (struct pci_controller *)data;
+	if (!hose || !hose->private_data)
+		return -ENODEV;
+
+	phb = hose->private_data;
+
+	/* Retrieve the diag data from firmware */
+	ret = opal_pci_get_phb_diag_data2(phb->opal_id, phb->diag.blob,
+					  PNV_PCI_DIAG_BUF_SIZE);
+	if (ret != OPAL_SUCCESS)
+		return -EIO;
+
+	/* Print the diag data to the kernel log */
+	pnv_pci_dump_phb_diag_data(phb->hose, phb->diag.blob);
+	return 0;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(pnv_pci_diag_data_fops, NULL,
+			pnv_pci_diag_data_set, "%llu\n");
+
+#endif /* CONFIG_DEBUG_FS */
+
 static void pnv_pci_ioda_create_dbgfs(void)
 {
 #ifdef CONFIG_DEBUG_FS
@@ -3064,9 +3109,14 @@
 
 		sprintf(name, "PCI%04x", hose->global_number);
 		phb->dbgfs = debugfs_create_dir(name, powerpc_debugfs_root);
-		if (!phb->dbgfs)
+		if (!phb->dbgfs) {
 			pr_warning("%s: Error on creating debugfs on PHB#%x\n",
 				__func__, hose->global_number);
+			continue;
+		}
+
+		debugfs_create_file("dump_diag_regs", 0200, phb->dbgfs, hose,
+				    &pnv_pci_diag_data_fops);
 	}
 #endif /* CONFIG_DEBUG_FS */
 }
@@ -3779,10 +3829,11 @@
 	if (rc)
 		pr_warning("  OPAL Error %ld performing IODA table reset !\n", rc);
 
-	/* If we're running in kdump kerenl, the previous kerenl never
+	/*
+	 * If we're running in kdump kernel, the previous kernel never
 	 * shutdown PCI devices correctly. We already got IODA table
 	 * cleaned out. So we have to issue PHB reset to stop all PCI
-	 * transactions from previous kerenl.
+	 * transactions from previous kernel.
 	 */
 	if (is_kdump_kernel()) {
 		pr_info("  Issue PHB reset ...\n");
diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c
index a21d831..db7b802 100644
--- a/arch/powerpc/platforms/powernv/pci.c
+++ b/arch/powerpc/platforms/powernv/pci.c
@@ -186,7 +186,7 @@
 			return -ENOSPC;
 		}
 		virq = irq_create_mapping(NULL, phb->msi_base + hwirq);
-		if (virq == NO_IRQ) {
+		if (!virq) {
 			pr_warn("%s: Failed to map MSI to linux irq\n",
 				pci_name(pdev));
 			msi_bitmap_free_hwirqs(&phb->msi_bmp, hwirq, 1);
@@ -217,7 +217,7 @@
 		return;
 
 	for_each_pci_msi_entry(entry, pdev) {
-		if (entry->irq == NO_IRQ)
+		if (!entry->irq)
 			continue;
 		hwirq = virq_to_hw(entry->irq);
 		irq_set_msi_desc(entry->irq, NULL);
@@ -309,8 +309,8 @@
 			be64_to_cpu(data->dma1ErrorLog1));
 
 	for (i = 0; i < OPAL_P7IOC_NUM_PEST_REGS; i++) {
-		if ((data->pestA[i] >> 63) == 0 &&
-		    (data->pestB[i] >> 63) == 0)
+		if ((be64_to_cpu(data->pestA[i]) >> 63) == 0 &&
+		    (be64_to_cpu(data->pestB[i]) >> 63) == 0)
 			continue;
 
 		pr_info("PE[%3d] A/B: %016llx %016llx\n",
diff --git a/arch/powerpc/platforms/ps3/device-init.c b/arch/powerpc/platforms/ps3/device-init.c
index 57caaf11..e484624 100644
--- a/arch/powerpc/platforms/ps3/device-init.c
+++ b/arch/powerpc/platforms/ps3/device-init.c
@@ -62,7 +62,7 @@
 		&dev->lpm.rights);
 
 	if (result) {
-		pr_debug("%s:%d: ps3_repository_read_lpm_privleges failed \n",
+		pr_debug("%s:%d: ps3_repository_read_lpm_privileges failed\n",
 			__func__, __LINE__);
 		goto fail_read_repo;
 	}
diff --git a/arch/powerpc/platforms/ps3/interrupt.c b/arch/powerpc/platforms/ps3/interrupt.c
index b831638..98f8c36 100644
--- a/arch/powerpc/platforms/ps3/interrupt.c
+++ b/arch/powerpc/platforms/ps3/interrupt.c
@@ -192,7 +192,7 @@
 
 	*virq = irq_create_mapping(NULL, outlet);
 
-	if (*virq == NO_IRQ) {
+	if (!*virq) {
 		FAIL("%s:%d: irq_create_mapping failed: outlet %lu\n",
 			__func__, __LINE__, outlet);
 		result = -ENOMEM;
@@ -339,7 +339,7 @@
 	if (result) {
 		FAIL("%s:%d: lv1_construct_event_receive_port failed: %s\n",
 			__func__, __LINE__, ps3_result(result));
-		*virq = NO_IRQ;
+		*virq = 0;
 		return result;
 	}
 
@@ -418,7 +418,7 @@
 			" failed: %s\n", __func__, __LINE__,
 			ps3_result(result));
 		ps3_event_receive_port_destroy(*virq);
-		*virq = NO_IRQ;
+		*virq = 0;
 		return result;
 	}
 
@@ -724,12 +724,12 @@
 	asm volatile("cntlzd %0,%1" : "=r" (plug) : "r" (x));
 	plug &= 0x3f;
 
-	if (unlikely(plug == NO_IRQ)) {
+	if (unlikely(!plug)) {
 		DBG("%s:%d: no plug found: thread_id %llu\n", __func__,
 			__LINE__, pd->thread_id);
 		dump_bmp(&per_cpu(ps3_private, 0));
 		dump_bmp(&per_cpu(ps3_private, 1));
-		return NO_IRQ;
+		return 0;
 	}
 
 #if defined(DEBUG)
diff --git a/arch/powerpc/platforms/ps3/smp.c b/arch/powerpc/platforms/ps3/smp.c
index 3c7707a..60154d0 100644
--- a/arch/powerpc/platforms/ps3/smp.c
+++ b/arch/powerpc/platforms/ps3/smp.c
@@ -91,7 +91,7 @@
 			result = smp_request_message_ipi(virqs[i], i);
 
 			if (result)
-				virqs[i] = NO_IRQ;
+				virqs[i] = 0;
 			else
 				ps3_register_ipi_irq(cpu, virqs[i]);
 		}
@@ -112,7 +112,7 @@
 	for (i = 0; i < MSG_COUNT; i++) {
 		/* Can't call free_irq from interrupt context. */
 		ps3_event_receive_port_destroy(virqs[i]);
-		virqs[i] = NO_IRQ;
+		virqs[i] = 0;
 	}
 
 	DBG(" <- %s:%d: (%d)\n", __func__, __LINE__, cpu);
diff --git a/arch/powerpc/platforms/ps3/spu.c b/arch/powerpc/platforms/ps3/spu.c
index 492b257..b548508 100644
--- a/arch/powerpc/platforms/ps3/spu.c
+++ b/arch/powerpc/platforms/ps3/spu.c
@@ -284,7 +284,7 @@
 fail_alloc_1:
 	ps3_spe_irq_destroy(spu->irqs[0]);
 fail_alloc_0:
-	spu->irqs[0] = spu->irqs[1] = spu->irqs[2] = NO_IRQ;
+	spu->irqs[0] = spu->irqs[1] = spu->irqs[2] = 0;
 	return result;
 }
 
@@ -334,7 +334,7 @@
 	ps3_spe_irq_destroy(spu->irqs[1]);
 	ps3_spe_irq_destroy(spu->irqs[0]);
 
-	spu->irqs[0] = spu->irqs[1] = spu->irqs[2] = NO_IRQ;
+	spu->irqs[0] = spu->irqs[1] = spu->irqs[2] = 0;
 
 	spu_unmap(spu);
 
diff --git a/arch/powerpc/platforms/pseries/dlpar.c b/arch/powerpc/platforms/pseries/dlpar.c
index 4748124..423e450 100644
--- a/arch/powerpc/platforms/pseries/dlpar.c
+++ b/arch/powerpc/platforms/pseries/dlpar.c
@@ -27,7 +27,7 @@
 #include <asm/uaccess.h>
 #include <asm/rtas.h>
 
-struct workqueue_struct *pseries_hp_wq;
+static struct workqueue_struct *pseries_hp_wq;
 
 struct pseries_hp_work {
 	struct work_struct work;
@@ -377,7 +377,7 @@
 	return rc;
 }
 
-void pseries_hp_work_fn(struct work_struct *work)
+static void pseries_hp_work_fn(struct work_struct *work)
 {
 	struct pseries_hp_work *hp_work =
 			container_of(work, struct pseries_hp_work, work);
@@ -413,6 +413,7 @@
 		queue_work(pseries_hp_wq, (struct work_struct *)work);
 	} else {
 		*rc = -ENOMEM;
+		kfree(hp_errlog_copy);
 		complete(hotplug_done);
 	}
 }
diff --git a/arch/powerpc/platforms/pseries/event_sources.c b/arch/powerpc/platforms/pseries/event_sources.c
index a6ddca8..32187dc 100644
--- a/arch/powerpc/platforms/pseries/event_sources.c
+++ b/arch/powerpc/platforms/pseries/event_sources.c
@@ -34,7 +34,7 @@
 		if (count > 15)
 			break;
 		virqs[count] = irq_create_of_mapping(&oirq);
-		if (virqs[count] == NO_IRQ) {
+		if (!virqs[count]) {
 			pr_err("event-sources: Unable to allocate "
 			       "interrupt number for %s\n",
 			       np->full_name);
diff --git a/arch/powerpc/platforms/pseries/msi.c b/arch/powerpc/platforms/pseries/msi.c
index 543a638..326ef0d 100644
--- a/arch/powerpc/platforms/pseries/msi.c
+++ b/arch/powerpc/platforms/pseries/msi.c
@@ -119,7 +119,7 @@
 	struct msi_desc *entry;
 
 	for_each_pci_msi_entry(entry, pdev) {
-		if (entry->irq == NO_IRQ)
+		if (!entry->irq)
 			continue;
 
 		irq_set_msi_desc(entry->irq, NULL);
@@ -471,7 +471,7 @@
 
 		virq = irq_create_mapping(NULL, hwirq);
 
-		if (virq == NO_IRQ) {
+		if (!virq) {
 			pr_debug("rtas_msi: Failed mapping hwirq %d\n", hwirq);
 			return -ENOSPC;
 		}
@@ -490,7 +490,7 @@
 static void rtas_msi_pci_irq_fixup(struct pci_dev *pdev)
 {
 	/* No LSI -> leave MSIs (if any) configured */
-	if (pdev->irq == NO_IRQ) {
+	if (!pdev->irq) {
 		dev_dbg(&pdev->dev, "rtas_msi: no LSI, nothing to do.\n");
 		return;
 	}
diff --git a/arch/powerpc/platforms/pseries/scanlog.c b/arch/powerpc/platforms/pseries/scanlog.c
index b502ab6..7d28cab 100644
--- a/arch/powerpc/platforms/pseries/scanlog.c
+++ b/arch/powerpc/platforms/pseries/scanlog.c
@@ -156,7 +156,7 @@
 	return 0;
 }
 
-const struct file_operations scanlog_fops = {
+static const struct file_operations scanlog_fops = {
 	.owner		= THIS_MODULE,
 	.read		= scanlog_read,
 	.write		= scanlog_write,
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index a39d20e..97aa3f3 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -114,7 +114,7 @@
 	struct irq_chip *chip = irq_desc_get_chip(desc);
 	unsigned int cascade_irq = i8259_irq();
 
-	if (cascade_irq != NO_IRQ)
+	if (cascade_irq)
 		generic_handle_irq(cascade_irq);
 
 	chip->irq_eoi(&desc->irq_data);
@@ -141,7 +141,7 @@
 	}
 
 	cascade = irq_of_parse_and_map(found, 0);
-	if (cascade == NO_IRQ) {
+	if (!cascade) {
 		printk(KERN_ERR "pic: failed to map cascade interrupt");
 		return;
 	}
diff --git a/arch/powerpc/sysdev/axonram.c b/arch/powerpc/sysdev/axonram.c
index 9144204..ada29ea 100644
--- a/arch/powerpc/sysdev/axonram.c
+++ b/arch/powerpc/sysdev/axonram.c
@@ -240,7 +240,7 @@
 	device_add_disk(&device->dev, bank->disk);
 
 	bank->irq_id = irq_of_parse_and_map(device->dev.of_node, 0);
-	if (bank->irq_id == NO_IRQ) {
+	if (!bank->irq_id) {
 		dev_err(&device->dev, "Cannot access ECC interrupt ID\n");
 		rc = -EFAULT;
 		goto failed;
@@ -250,7 +250,7 @@
 			AXON_RAM_IRQ_FLAGS, bank->disk->disk_name, device);
 	if (rc != 0) {
 		dev_err(&device->dev, "Cannot register ECC interrupt handler\n");
-		bank->irq_id = NO_IRQ;
+		bank->irq_id = 0;
 		rc = -EFAULT;
 		goto failed;
 	}
@@ -268,7 +268,7 @@
 
 failed:
 	if (bank != NULL) {
-		if (bank->irq_id != NO_IRQ)
+		if (bank->irq_id)
 			free_irq(bank->irq_id, device);
 		if (bank->disk != NULL) {
 			if (bank->disk->major > 0)
diff --git a/arch/powerpc/sysdev/cpm1.c b/arch/powerpc/sysdev/cpm1.c
index 81d4947..3c0eb9b 100644
--- a/arch/powerpc/sysdev/cpm1.c
+++ b/arch/powerpc/sysdev/cpm1.c
@@ -132,7 +132,7 @@
 {
 	struct device_node *np = NULL;
 	struct resource res;
-	unsigned int sirq = NO_IRQ, hwirq, eirq;
+	unsigned int sirq = 0, hwirq, eirq;
 	int ret;
 
 	pr_debug("cpm_pic_init\n");
@@ -154,7 +154,7 @@
 		goto end;
 
 	sirq = irq_of_parse_and_map(np, 0);
-	if (sirq == NO_IRQ)
+	if (!sirq)
 		goto end;
 
 	/* Initialize the CPM interrupt controller. */
@@ -168,7 +168,7 @@
 	cpm_pic_host = irq_domain_add_linear(np, 64, &cpm_pic_host_ops, NULL);
 	if (cpm_pic_host == NULL) {
 		printk(KERN_ERR "CPM2 PIC: failed to allocate irq host!\n");
-		sirq = NO_IRQ;
+		sirq = 0;
 		goto end;
 	}
 
@@ -182,7 +182,7 @@
 	}
 
 	eirq = irq_of_parse_and_map(np, 0);
-	if (eirq == NO_IRQ)
+	if (!eirq)
 		goto end;
 
 	if (setup_irq(eirq, &cpm_error_irqaction))
diff --git a/arch/powerpc/sysdev/ehv_pic.c b/arch/powerpc/sysdev/ehv_pic.c
index bffcc7a..48866e6 100644
--- a/arch/powerpc/sysdev/ehv_pic.c
+++ b/arch/powerpc/sysdev/ehv_pic.c
@@ -155,7 +155,7 @@
 	.irq_set_type	= ehv_pic_set_irq_type,
 };
 
-/* Return an interrupt vector or NO_IRQ if no interrupt is pending. */
+/* Return an interrupt vector or 0 if no interrupt is pending. */
 unsigned int ehv_pic_get_irq(void)
 {
 	int irq;
@@ -168,7 +168,7 @@
 		ev_int_iack(0, &irq); /* legacy mode */
 
 	if (irq == 0xFFFF)    /* 0xFFFF --> no irq is pending */
-		return NO_IRQ;
+		return 0;
 
 	/*
 	 * this will also setup revmap[] in the slow path for the first
diff --git a/arch/powerpc/sysdev/fsl_gtm.c b/arch/powerpc/sysdev/fsl_gtm.c
index 06ac3c6..a6f0b96 100644
--- a/arch/powerpc/sysdev/fsl_gtm.c
+++ b/arch/powerpc/sysdev/fsl_gtm.c
@@ -406,7 +406,7 @@
 			unsigned int irq;
 
 			irq = irq_of_parse_and_map(np, i);
-			if (irq == NO_IRQ) {
+			if (!irq) {
 				pr_err("%s: not enough interrupts specified\n",
 				       np->full_name);
 				goto err;
diff --git a/arch/powerpc/sysdev/fsl_mpic_err.c b/arch/powerpc/sysdev/fsl_mpic_err.c
index b83f325..488ec45 100644
--- a/arch/powerpc/sysdev/fsl_mpic_err.c
+++ b/arch/powerpc/sysdev/fsl_mpic_err.c
@@ -115,8 +115,8 @@
 		errint = __builtin_clz(eisr);
 		cascade_irq = irq_linear_revmap(mpic->irqhost,
 				 mpic->err_int_vecs[errint]);
-		WARN_ON(cascade_irq == NO_IRQ);
-		if (cascade_irq != NO_IRQ) {
+		WARN_ON(!cascade_irq);
+		if (cascade_irq) {
 			generic_handle_irq(cascade_irq);
 		} else {
 			eimr |=  1 << (31 - errint);
@@ -134,7 +134,7 @@
 	int ret;
 
 	virq = irq_create_mapping(mpic->irqhost, irqnum);
-	if (virq == NO_IRQ) {
+	if (!virq) {
 		pr_err("Error interrupt setup failed\n");
 		return;
 	}
diff --git a/arch/powerpc/sysdev/fsl_msi.c b/arch/powerpc/sysdev/fsl_msi.c
index 3a2be36..8a24482 100644
--- a/arch/powerpc/sysdev/fsl_msi.c
+++ b/arch/powerpc/sysdev/fsl_msi.c
@@ -131,7 +131,7 @@
 	irq_hw_number_t hwirq;
 
 	for_each_pci_msi_entry(entry, pdev) {
-		if (entry->irq == NO_IRQ)
+		if (!entry->irq)
 			continue;
 		hwirq = virq_to_hw(entry->irq);
 		msi_data = irq_get_chip_data(entry->irq);
@@ -250,7 +250,7 @@
 
 		virq = irq_create_mapping(msi_data->irqhost, hwirq);
 
-		if (virq == NO_IRQ) {
+		if (!virq) {
 			dev_err(&pdev->dev, "fail mapping hwirq %i\n", hwirq);
 			msi_bitmap_free_hwirqs(&msi_data->bitmap, hwirq, 1);
 			rc = -ENOSPC;
@@ -285,7 +285,7 @@
 	msir_index = cascade_data->index;
 
 	if (msir_index >= NR_MSI_REG_MAX)
-		cascade_irq = NO_IRQ;
+		cascade_irq = 0;
 
 	switch (msi_data->feature & FSL_PIC_IP_MASK) {
 	case FSL_PIC_IP_MPIC:
@@ -315,7 +315,7 @@
 		cascade_irq = irq_linear_revmap(msi_data->irqhost,
 				msi_hwirq(msi_data, msir_index,
 					  intr_index + have_shift));
-		if (cascade_irq != NO_IRQ) {
+		if (cascade_irq) {
 			generic_handle_irq(cascade_irq);
 			ret = IRQ_HANDLED;
 		}
@@ -337,7 +337,7 @@
 		if (msi->cascade_array[i]) {
 			virq = msi->cascade_array[i]->virq;
 
-			BUG_ON(virq == NO_IRQ);
+			BUG_ON(!virq);
 
 			free_irq(virq, msi->cascade_array[i]);
 			kfree(msi->cascade_array[i]);
@@ -362,7 +362,7 @@
 	int virt_msir, i, ret;
 
 	virt_msir = irq_of_parse_and_map(dev->dev.of_node, irq_index);
-	if (virt_msir == NO_IRQ) {
+	if (!virt_msir) {
 		dev_err(&dev->dev, "%s: Cannot translate IRQ index %d\n",
 			__func__, irq_index);
 		return 0;
diff --git a/arch/powerpc/sysdev/ge/ge_pic.c b/arch/powerpc/sysdev/ge/ge_pic.c
index d57b775..02553a8 100644
--- a/arch/powerpc/sysdev/ge/ge_pic.c
+++ b/arch/powerpc/sysdev/ge/ge_pic.c
@@ -102,7 +102,7 @@
 	 */
 	cascade_irq = gef_pic_get_irq();
 
-	if (cascade_irq != NO_IRQ)
+	if (cascade_irq)
 		generic_handle_irq(cascade_irq);
 
 	chip->irq_eoi(&desc->irq_data);
@@ -206,7 +206,7 @@
 
 	/* Map controller */
 	gef_pic_cascade_irq = irq_of_parse_and_map(np, 0);
-	if (gef_pic_cascade_irq == NO_IRQ) {
+	if (!gef_pic_cascade_irq) {
 		printk(KERN_ERR "SBC610: failed to map cascade interrupt");
 		return;
 	}
@@ -223,12 +223,12 @@
 
 /*
  * This is called when we receive an interrupt with apparently comes from this
- * chip - check, returning the highest interrupt generated or return NO_IRQ
+ * chip - check, returning the highest interrupt generated or return 0.
  */
 unsigned int gef_pic_get_irq(void)
 {
 	u32 cause, mask, active;
-	unsigned int virq = NO_IRQ;
+	unsigned int virq = 0;
 	int hwirq;
 
 	cause = in_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_STATUS);
diff --git a/arch/powerpc/sysdev/i8259.c b/arch/powerpc/sysdev/i8259.c
index aa2c186..bafb014 100644
--- a/arch/powerpc/sysdev/i8259.c
+++ b/arch/powerpc/sysdev/i8259.c
@@ -68,9 +68,9 @@
 		if (!pci_intack)
 			outb(0x0B, 0x20);	/* ISR register */
 		if(~inb(0x20) & 0x80)
-			irq = NO_IRQ;
+			irq = 0;
 	} else if (irq == 0xff)
-		irq = NO_IRQ;
+		irq = 0;
 
 	if (lock)
 		raw_spin_unlock(&i8259_lock);
diff --git a/arch/powerpc/sysdev/ipic.c b/arch/powerpc/sysdev/ipic.c
index f76ee39..f267ee0 100644
--- a/arch/powerpc/sysdev/ipic.c
+++ b/arch/powerpc/sysdev/ipic.c
@@ -853,7 +853,7 @@
 	ipic_write(primary_ipic->regs, IPIC_SERMR, mask);
 }
 
-/* Return an interrupt vector or NO_IRQ if no interrupt is pending. */
+/* Return an interrupt vector or 0 if no interrupt is pending. */
 unsigned int ipic_get_irq(void)
 {
 	int irq;
@@ -864,7 +864,7 @@
 	irq = ipic_read(primary_ipic->regs, IPIC_SIVCR) & IPIC_SIVCR_VECTOR_MASK;
 
 	if (irq == 0)    /* 0 --> no irq is pending */
-		return NO_IRQ;
+		return 0;
 
 	return irq_linear_revmap(primary_ipic->irqhost, irq);
 }
diff --git a/arch/powerpc/sysdev/mmio_nvram.c b/arch/powerpc/sysdev/mmio_nvram.c
index 69f5814..c31f634 100644
--- a/arch/powerpc/sysdev/mmio_nvram.c
+++ b/arch/powerpc/sysdev/mmio_nvram.c
@@ -89,7 +89,7 @@
 	return count;
 }
 
-void mmio_nvram_write_val(int addr, unsigned char val)
+static void mmio_nvram_write_val(int addr, unsigned char val)
 {
 	unsigned long flags;
 
diff --git a/arch/powerpc/sysdev/mpc8xx_pic.c b/arch/powerpc/sysdev/mpc8xx_pic.c
index b7cf7ab..3e828b2 100644
--- a/arch/powerpc/sysdev/mpc8xx_pic.c
+++ b/arch/powerpc/sysdev/mpc8xx_pic.c
@@ -79,7 +79,7 @@
 	irq = in_be32(&siu_reg->sc_sivec) >> 26;
 
 	if (irq == PIC_VEC_SPURRIOUS)
-		irq = NO_IRQ;
+		irq = 0;
 
         return irq_linear_revmap(mpc8xx_pic_host, irq);
 
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index 7de45b2..4d48cec 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -1649,7 +1649,7 @@
 	/* Check if this MPIC is chained from a parent interrupt controller */
 	if (mpic->flags & MPIC_SECONDARY) {
 		int virq = irq_of_parse_and_map(mpic->node, 0);
-		if (virq != NO_IRQ) {
+		if (virq) {
 			printk(KERN_INFO "%s: hooking up to IRQ %d\n",
 					mpic->node->full_name, virq);
 			irq_set_handler_data(virq, mpic);
@@ -1778,13 +1778,13 @@
 	if (unlikely(src == mpic->spurious_vec)) {
 		if (mpic->flags & MPIC_SPV_EOI)
 			mpic_eoi(mpic);
-		return NO_IRQ;
+		return 0;
 	}
 	if (unlikely(mpic->protected && test_bit(src, mpic->protected))) {
 		printk_ratelimited(KERN_WARNING "%s: Got protected source %d !\n",
 				   mpic->name, (int)src);
 		mpic_eoi(mpic);
-		return NO_IRQ;
+		return 0;
 	}
 
 	return irq_linear_revmap(mpic->irqhost, src);
@@ -1817,17 +1817,17 @@
 	if (unlikely(src == mpic->spurious_vec)) {
 		if (mpic->flags & MPIC_SPV_EOI)
 			mpic_eoi(mpic);
-		return NO_IRQ;
+		return 0;
 	}
 	if (unlikely(mpic->protected && test_bit(src, mpic->protected))) {
 		printk_ratelimited(KERN_WARNING "%s: Got protected source %d !\n",
 				   mpic->name, (int)src);
-		return NO_IRQ;
+		return 0;
 	}
 
 	return irq_linear_revmap(mpic->irqhost, src);
 #else
-	return NO_IRQ;
+	return 0;
 #endif
 }
 
@@ -1852,7 +1852,7 @@
 	for (i = 0; i < 4; i++) {
 		unsigned int vipi = irq_create_mapping(mpic->irqhost,
 						       mpic->ipi_vecs[0] + i);
-		if (vipi == NO_IRQ) {
+		if (!vipi) {
 			printk(KERN_ERR "Failed to map %s\n", smp_ipi_name[i]);
 			continue;
 		}
diff --git a/arch/powerpc/sysdev/mpic_msgr.c b/arch/powerpc/sysdev/mpic_msgr.c
index 3f165d9..db2286b 100644
--- a/arch/powerpc/sysdev/mpic_msgr.c
+++ b/arch/powerpc/sysdev/mpic_msgr.c
@@ -238,7 +238,7 @@
 
 		if (receive_mask & (1 << i)) {
 			msgr->irq = irq_of_parse_and_map(np, irq_index);
-			if (msgr->irq == NO_IRQ) {
+			if (!msgr->irq) {
 				dev_err(&dev->dev,
 						"Missing interrupt specifier");
 				kfree(msgr);
@@ -246,7 +246,7 @@
 			}
 			irq_index += 1;
 		} else {
-			msgr->irq = NO_IRQ;
+			msgr->irq = 0;
 		}
 
 		mpic_msgrs[reg_number] = msgr;
diff --git a/arch/powerpc/sysdev/mpic_u3msi.c b/arch/powerpc/sysdev/mpic_u3msi.c
index 2cbc7e2..cfc1c57 100644
--- a/arch/powerpc/sysdev/mpic_u3msi.c
+++ b/arch/powerpc/sysdev/mpic_u3msi.c
@@ -110,7 +110,7 @@
 	irq_hw_number_t hwirq;
 
 	for_each_pci_msi_entry(entry, pdev) {
-		if (entry->irq == NO_IRQ)
+		if (!entry->irq)
 			continue;
 
 		hwirq = virq_to_hw(entry->irq);
@@ -155,7 +155,7 @@
 		msg.address_hi = addr >> 32;
 
 		virq = irq_create_mapping(msi_mpic->irqhost, hwirq);
-		if (virq == NO_IRQ) {
+		if (!virq) {
 			pr_debug("u3msi: failed mapping hwirq 0x%x\n", hwirq);
 			msi_bitmap_free_hwirqs(&msi_mpic->msi_bitmap, hwirq, 1);
 			return -ENOSPC;
diff --git a/arch/powerpc/sysdev/mv64x60_pic.c b/arch/powerpc/sysdev/mv64x60_pic.c
index 0f842dd..a79953d 100644
--- a/arch/powerpc/sysdev/mv64x60_pic.c
+++ b/arch/powerpc/sysdev/mv64x60_pic.c
@@ -272,7 +272,7 @@
 	u32 cause;
 	int level1;
 	irq_hw_number_t hwirq;
-	int virq = NO_IRQ;
+	int virq = 0;
 
 	cause = in_le32(mv64x60_irq_reg_base + MV64X60_IC_CPU0_SELECT_CAUSE);
 	if (cause & MV64X60_SELECT_CAUSE_HIGH) {
diff --git a/arch/powerpc/sysdev/pmi.c b/arch/powerpc/sysdev/pmi.c
index 8a0b77a..9ea6a22 100644
--- a/arch/powerpc/sysdev/pmi.c
+++ b/arch/powerpc/sysdev/pmi.c
@@ -158,7 +158,7 @@
 	data->dev = dev;
 
 	data->irq = irq_of_parse_and_map(np, 0);
-	if (data->irq == NO_IRQ) {
+	if (!data->irq) {
 		printk(KERN_ERR "pmi: invalid interrupt.\n");
 		rc = -EFAULT;
 		goto error_cleanup_iomap;
diff --git a/arch/powerpc/sysdev/ppc4xx_hsta_msi.c b/arch/powerpc/sysdev/ppc4xx_hsta_msi.c
index 52a93dc..9926ad6 100644
--- a/arch/powerpc/sysdev/ppc4xx_hsta_msi.c
+++ b/arch/powerpc/sysdev/ppc4xx_hsta_msi.c
@@ -60,7 +60,7 @@
 		}
 
 		hwirq = ppc4xx_hsta_msi.irq_map[irq];
-		if (hwirq == NO_IRQ) {
+		if (!hwirq) {
 			pr_err("%s: Failed mapping irq %d\n", __func__, irq);
 			return -EINVAL;
 		}
@@ -110,7 +110,7 @@
 	int irq;
 
 	for_each_pci_msi_entry(entry, dev) {
-		if (entry->irq == NO_IRQ)
+		if (!entry->irq)
 			continue;
 
 		irq = hsta_find_hwirq_offset(entry->irq);
@@ -166,7 +166,7 @@
 	for (irq = 0; irq < irq_count; irq++) {
 		ppc4xx_hsta_msi.irq_map[irq] =
 			irq_of_parse_and_map(dev->of_node, irq);
-		if (ppc4xx_hsta_msi.irq_map[irq] == NO_IRQ) {
+		if (!ppc4xx_hsta_msi.irq_map[irq]) {
 			dev_err(dev, "Unable to map IRQ\n");
 			ret = -EINVAL;
 			goto out2;
diff --git a/arch/powerpc/sysdev/ppc4xx_msi.c b/arch/powerpc/sysdev/ppc4xx_msi.c
index 8fb8061..590dab4 100644
--- a/arch/powerpc/sysdev/ppc4xx_msi.c
+++ b/arch/powerpc/sysdev/ppc4xx_msi.c
@@ -102,7 +102,7 @@
 					__func__);
 		}
 		virq = irq_of_parse_and_map(msi_data->msi_dev, int_no);
-		if (virq == NO_IRQ) {
+		if (!virq) {
 			dev_err(&dev->dev, "%s: fail mapping irq\n", __func__);
 			msi_bitmap_free_hwirqs(&msi_data->bitmap, int_no, 1);
 			return -ENOSPC;
@@ -129,7 +129,7 @@
 	dev_dbg(&dev->dev, "PCIE-MSI: tearing down msi irqs\n");
 
 	for_each_pci_msi_entry(entry, dev) {
-		if (entry->irq == NO_IRQ)
+		if (!entry->irq)
 			continue;
 		hwirq = virq_to_hw(entry->irq);
 		irq_set_msi_desc(entry->irq, NULL);
@@ -201,7 +201,7 @@
 
 	for (i = 0; i < msi_irqs; i++) {
 		virq = msi->msi_virqs[i];
-		if (virq != NO_IRQ)
+		if (virq)
 			irq_dispose_mapping(virq);
 	}
 
diff --git a/arch/powerpc/sysdev/ppc4xx_soc.c b/arch/powerpc/sysdev/ppc4xx_soc.c
index 5c77c9b..d41134d 100644
--- a/arch/powerpc/sysdev/ppc4xx_soc.c
+++ b/arch/powerpc/sysdev/ppc4xx_soc.c
@@ -109,7 +109,7 @@
 
 	/* Get and map irq number from device tree */
 	irq = irq_of_parse_and_map(np, 0);
-	if (irq == NO_IRQ) {
+	if (!irq) {
 		printk(KERN_ERR "irq_of_parse_and_map failed\n");
 		of_node_put(np);
 		return -ENODEV;
diff --git a/arch/powerpc/sysdev/tsi108_pci.c b/arch/powerpc/sysdev/tsi108_pci.c
index 379de95..57c971b 100644
--- a/arch/powerpc/sysdev/tsi108_pci.c
+++ b/arch/powerpc/sysdev/tsi108_pci.c
@@ -433,7 +433,7 @@
 	struct irq_chip *chip = irq_desc_get_chip(desc);
 	unsigned int cascade_irq = get_pci_source();
 
-	if (cascade_irq != NO_IRQ)
+	if (cascade_irq)
 		generic_handle_irq(cascade_irq);
 
 	chip->irq_eoi(&desc->irq_data);
diff --git a/arch/powerpc/sysdev/uic.c b/arch/powerpc/sysdev/uic.c
index 6893d8f..a00949f 100644
--- a/arch/powerpc/sysdev/uic.c
+++ b/arch/powerpc/sysdev/uic.c
@@ -319,7 +319,7 @@
 	}
 }
 
-/* Return an interrupt vector or NO_IRQ if no interrupt is pending. */
+/* Return an interrupt vector or 0 if no interrupt is pending. */
 unsigned int uic_get_irq(void)
 {
 	u32 msr;
diff --git a/arch/powerpc/sysdev/xics/icp-hv.c b/arch/powerpc/sysdev/xics/icp-hv.c
index c1917cf..e7fa26c 100644
--- a/arch/powerpc/sysdev/xics/icp-hv.c
+++ b/arch/powerpc/sysdev/xics/icp-hv.c
@@ -112,10 +112,10 @@
 	unsigned int irq;
 
 	if (vec == XICS_IRQ_SPURIOUS)
-		return NO_IRQ;
+		return 0;
 
 	irq = irq_find_mapping(xics_host, vec);
-	if (likely(irq != NO_IRQ)) {
+	if (likely(irq)) {
 		xics_push_cppr(vec);
 		return irq;
 	}
@@ -126,7 +126,7 @@
 	/* We might learn about it later, so EOI it */
 	icp_hv_set_xirr(xirr);
 
-	return NO_IRQ;
+	return 0;
 }
 
 static void icp_hv_set_cpu_priority(unsigned char cppr)
diff --git a/arch/powerpc/sysdev/xics/icp-native.c b/arch/powerpc/sysdev/xics/icp-native.c
index afdf62f..8a6a043 100644
--- a/arch/powerpc/sysdev/xics/icp-native.c
+++ b/arch/powerpc/sysdev/xics/icp-native.c
@@ -124,10 +124,10 @@
 	unsigned int irq;
 
 	if (vec == XICS_IRQ_SPURIOUS)
-		return NO_IRQ;
+		return 0;
 
 	irq = irq_find_mapping(xics_host, vec);
-	if (likely(irq != NO_IRQ)) {
+	if (likely(irq)) {
 		xics_push_cppr(vec);
 		return irq;
 	}
@@ -138,7 +138,7 @@
 	/* We might learn about it later, so EOI it */
 	icp_native_set_xirr(xirr);
 
-	return NO_IRQ;
+	return 0;
 }
 
 #ifdef CONFIG_SMP
diff --git a/arch/powerpc/sysdev/xics/icp-opal.c b/arch/powerpc/sysdev/xics/icp-opal.c
index 9114243..d38e86f 100644
--- a/arch/powerpc/sysdev/xics/icp-opal.c
+++ b/arch/powerpc/sysdev/xics/icp-opal.c
@@ -51,14 +51,14 @@
 
 	rc = opal_int_get_xirr(&xirr, false);
 	if (rc < 0)
-		return NO_IRQ;
+		return 0;
 	xirr = be32_to_cpu(xirr);
 	vec = xirr & 0x00ffffff;
 	if (vec == XICS_IRQ_SPURIOUS)
-		return NO_IRQ;
+		return 0;
 
 	irq = irq_find_mapping(xics_host, vec);
-	if (likely(irq != NO_IRQ)) {
+	if (likely(irq)) {
 		xics_push_cppr(vec);
 		return irq;
 	}
@@ -69,7 +69,7 @@
 	/* We might learn about it later, so EOI it */
 	opal_int_eoi(xirr);
 
-	return NO_IRQ;
+	return 0;
 }
 
 static void icp_opal_set_cpu_priority(unsigned char cppr)
diff --git a/arch/powerpc/sysdev/xics/xics-common.c b/arch/powerpc/sysdev/xics/xics-common.c
index 9d530f4..69d858e 100644
--- a/arch/powerpc/sysdev/xics/xics-common.c
+++ b/arch/powerpc/sysdev/xics/xics-common.c
@@ -131,7 +131,7 @@
 	unsigned int ipi;
 
 	ipi = irq_create_mapping(xics_host, XICS_IPI);
-	BUG_ON(ipi == NO_IRQ);
+	BUG_ON(!ipi);
 
 	/*
 	 * IPIs are marked IRQF_PERCPU. The handler was set in map.
diff --git a/arch/powerpc/xmon/spr_access.S b/arch/powerpc/xmon/spr_access.S
index 84ad742..7d8b0e8 100644
--- a/arch/powerpc/xmon/spr_access.S
+++ b/arch/powerpc/xmon/spr_access.S
@@ -2,12 +2,12 @@
 
 /* unsigned long xmon_mfspr(sprn, default_value) */
 _GLOBAL(xmon_mfspr)
-	ld	r5, .Lmfspr_table@got(r2)
+	PPC_LL	r5, .Lmfspr_table@got(r2)
 	b	xmon_mxspr
 
 /* void xmon_mtspr(sprn, new_value) */
 _GLOBAL(xmon_mtspr)
-	ld	r5, .Lmtspr_table@got(r2)
+	PPC_LL	r5, .Lmtspr_table@got(r2)
 	b	xmon_mxspr
 
 /*
diff --git a/block/Kconfig b/block/Kconfig
index 161491d..5136ad4 100644
--- a/block/Kconfig
+++ b/block/Kconfig
@@ -4,6 +4,7 @@
 menuconfig BLOCK
        bool "Enable the block layer" if EXPERT
        default y
+       select SBITMAP
        help
 	 Provide block layer support for the kernel.
 
diff --git a/block/bio.c b/block/bio.c
index aa73540..db85c57 100644
--- a/block/bio.c
+++ b/block/bio.c
@@ -1068,7 +1068,7 @@
 	return 0;
 }
 
-static void bio_free_pages(struct bio *bio)
+void bio_free_pages(struct bio *bio)
 {
 	struct bio_vec *bvec;
 	int i;
@@ -1076,6 +1076,7 @@
 	bio_for_each_segment_all(bvec, bio, i)
 		__free_page(bvec->bv_page);
 }
+EXPORT_SYMBOL(bio_free_pages);
 
 /**
  *	bio_uncopy_user	-	finish previously mapped bio
@@ -1274,7 +1275,7 @@
 
 		nr_pages += end - start;
 		/*
-		 * buffer must be aligned to at least hardsector size for now
+		 * buffer must be aligned to at least logical block size for now
 		 */
 		if (uaddr & queue_dma_alignment(q))
 			return ERR_PTR(-EINVAL);
diff --git a/block/blk-core.c b/block/blk-core.c
index 36c7ac3..14d7c07 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -288,7 +288,7 @@
 		int i;
 
 		queue_for_each_hw_ctx(q, hctx, i) {
-			cancel_delayed_work_sync(&hctx->run_work);
+			cancel_work_sync(&hctx->run_work);
 			cancel_delayed_work_sync(&hctx->delay_work);
 		}
 	} else {
@@ -3097,6 +3097,12 @@
 }
 EXPORT_SYMBOL(kblockd_schedule_work);
 
+int kblockd_schedule_work_on(int cpu, struct work_struct *work)
+{
+	return queue_work_on(cpu, kblockd_workqueue, work);
+}
+EXPORT_SYMBOL(kblockd_schedule_work_on);
+
 int kblockd_schedule_delayed_work(struct delayed_work *dwork,
 				  unsigned long delay)
 {
@@ -3301,19 +3307,23 @@
 {
 	struct blk_plug *plug;
 	long state;
+	unsigned int queue_num;
+	struct blk_mq_hw_ctx *hctx;
 
 	if (!q->mq_ops || !q->mq_ops->poll || !blk_qc_t_valid(cookie) ||
 	    !test_bit(QUEUE_FLAG_POLL, &q->queue_flags))
 		return false;
 
+	queue_num = blk_qc_t_to_queue_num(cookie);
+	hctx = q->queue_hw_ctx[queue_num];
+	hctx->poll_considered++;
+
 	plug = current->plug;
 	if (plug)
 		blk_flush_plug_list(plug, false);
 
 	state = current->state;
 	while (!need_resched()) {
-		unsigned int queue_num = blk_qc_t_to_queue_num(cookie);
-		struct blk_mq_hw_ctx *hctx = q->queue_hw_ctx[queue_num];
 		int ret;
 
 		hctx->poll_invoked++;
diff --git a/block/blk-mq-sysfs.c b/block/blk-mq-sysfs.c
index fe822aa..01fb455 100644
--- a/block/blk-mq-sysfs.c
+++ b/block/blk-mq-sysfs.c
@@ -176,7 +176,17 @@
 
 static ssize_t blk_mq_hw_sysfs_poll_show(struct blk_mq_hw_ctx *hctx, char *page)
 {
-	return sprintf(page, "invoked=%lu, success=%lu\n", hctx->poll_invoked, hctx->poll_success);
+	return sprintf(page, "considered=%lu, invoked=%lu, success=%lu\n",
+		       hctx->poll_considered, hctx->poll_invoked,
+		       hctx->poll_success);
+}
+
+static ssize_t blk_mq_hw_sysfs_poll_store(struct blk_mq_hw_ctx *hctx,
+					  const char *page, size_t size)
+{
+	hctx->poll_considered = hctx->poll_invoked = hctx->poll_success = 0;
+
+	return size;
 }
 
 static ssize_t blk_mq_hw_sysfs_queued_show(struct blk_mq_hw_ctx *hctx,
@@ -198,12 +208,14 @@
 
 	page += sprintf(page, "%8u\t%lu\n", 0U, hctx->dispatched[0]);
 
-	for (i = 1; i < BLK_MQ_MAX_DISPATCH_ORDER; i++) {
-		unsigned long d = 1U << (i - 1);
+	for (i = 1; i < BLK_MQ_MAX_DISPATCH_ORDER - 1; i++) {
+		unsigned int d = 1U << (i - 1);
 
-		page += sprintf(page, "%8lu\t%lu\n", d, hctx->dispatched[i]);
+		page += sprintf(page, "%8u\t%lu\n", d, hctx->dispatched[i]);
 	}
 
+	page += sprintf(page, "%8u+\t%lu\n", 1U << (i - 1),
+						hctx->dispatched[i]);
 	return page - start_page;
 }
 
@@ -301,8 +313,9 @@
 	.show = blk_mq_hw_sysfs_cpus_show,
 };
 static struct blk_mq_hw_ctx_sysfs_entry blk_mq_hw_sysfs_poll = {
-	.attr = {.name = "io_poll", .mode = S_IRUGO },
+	.attr = {.name = "io_poll", .mode = S_IWUSR | S_IRUGO },
 	.show = blk_mq_hw_sysfs_poll_show,
+	.store = blk_mq_hw_sysfs_poll_store,
 };
 
 static struct attribute *default_hw_ctx_attrs[] = {
@@ -380,9 +393,8 @@
 	return ret;
 }
 
-static void __blk_mq_unregister_disk(struct gendisk *disk)
+static void __blk_mq_unregister_dev(struct device *dev, struct request_queue *q)
 {
-	struct request_queue *q = disk->queue;
 	struct blk_mq_hw_ctx *hctx;
 	struct blk_mq_ctx *ctx;
 	int i, j;
@@ -400,15 +412,15 @@
 	kobject_del(&q->mq_kobj);
 	kobject_put(&q->mq_kobj);
 
-	kobject_put(&disk_to_dev(disk)->kobj);
+	kobject_put(&dev->kobj);
 
 	q->mq_sysfs_init_done = false;
 }
 
-void blk_mq_unregister_disk(struct gendisk *disk)
+void blk_mq_unregister_dev(struct device *dev, struct request_queue *q)
 {
 	blk_mq_disable_hotplug();
-	__blk_mq_unregister_disk(disk);
+	__blk_mq_unregister_dev(dev, q);
 	blk_mq_enable_hotplug();
 }
 
@@ -430,10 +442,8 @@
 	}
 }
 
-int blk_mq_register_disk(struct gendisk *disk)
+int blk_mq_register_dev(struct device *dev, struct request_queue *q)
 {
-	struct device *dev = disk_to_dev(disk);
-	struct request_queue *q = disk->queue;
 	struct blk_mq_hw_ctx *hctx;
 	int ret, i;
 
@@ -454,7 +464,7 @@
 	}
 
 	if (ret)
-		__blk_mq_unregister_disk(disk);
+		__blk_mq_unregister_dev(dev, q);
 	else
 		q->mq_sysfs_init_done = true;
 out:
@@ -462,7 +472,7 @@
 
 	return ret;
 }
-EXPORT_SYMBOL_GPL(blk_mq_register_disk);
+EXPORT_SYMBOL_GPL(blk_mq_register_dev);
 
 void blk_mq_sysfs_unregister(struct request_queue *q)
 {
diff --git a/block/blk-mq-tag.c b/block/blk-mq-tag.c
index 729bac3..cef618f 100644
--- a/block/blk-mq-tag.c
+++ b/block/blk-mq-tag.c
@@ -1,58 +1,24 @@
 /*
- * Fast and scalable bitmap tagging variant. Uses sparser bitmaps spread
- * over multiple cachelines to avoid ping-pong between multiple submitters
- * or submitter and completer. Uses rolling wakeups to avoid falling of
- * the scaling cliff when we run out of tags and have to start putting
- * submitters to sleep.
- *
- * Uses active queue tracking to support fairer distribution of tags
- * between multiple submitters when a shared tag map is used.
+ * Tag allocation using scalable bitmaps. Uses active queue tracking to support
+ * fairer distribution of tags between multiple submitters when a shared tag map
+ * is used.
  *
  * Copyright (C) 2013-2014 Jens Axboe
  */
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/random.h>
 
 #include <linux/blk-mq.h>
 #include "blk.h"
 #include "blk-mq.h"
 #include "blk-mq-tag.h"
 
-static bool bt_has_free_tags(struct blk_mq_bitmap_tags *bt)
-{
-	int i;
-
-	for (i = 0; i < bt->map_nr; i++) {
-		struct blk_align_bitmap *bm = &bt->map[i];
-		int ret;
-
-		ret = find_first_zero_bit(&bm->word, bm->depth);
-		if (ret < bm->depth)
-			return true;
-	}
-
-	return false;
-}
-
 bool blk_mq_has_free_tags(struct blk_mq_tags *tags)
 {
 	if (!tags)
 		return true;
 
-	return bt_has_free_tags(&tags->bitmap_tags);
-}
-
-static inline int bt_index_inc(int index)
-{
-	return (index + 1) & (BT_WAIT_QUEUES - 1);
-}
-
-static inline void bt_index_atomic_inc(atomic_t *index)
-{
-	int old = atomic_read(index);
-	int new = bt_index_inc(old);
-	atomic_cmpxchg(index, old, new);
+	return sbitmap_any_bit_clear(&tags->bitmap_tags.sb);
 }
 
 /*
@@ -72,29 +38,9 @@
  */
 void blk_mq_tag_wakeup_all(struct blk_mq_tags *tags, bool include_reserve)
 {
-	struct blk_mq_bitmap_tags *bt;
-	int i, wake_index;
-
-	/*
-	 * Make sure all changes prior to this are visible from other CPUs.
-	 */
-	smp_mb();
-	bt = &tags->bitmap_tags;
-	wake_index = atomic_read(&bt->wake_index);
-	for (i = 0; i < BT_WAIT_QUEUES; i++) {
-		struct bt_wait_state *bs = &bt->bs[wake_index];
-
-		if (waitqueue_active(&bs->wait))
-			wake_up(&bs->wait);
-
-		wake_index = bt_index_inc(wake_index);
-	}
-
-	if (include_reserve) {
-		bt = &tags->breserved_tags;
-		if (waitqueue_active(&bt->bs[0].wait))
-			wake_up(&bt->bs[0].wait);
-	}
+	sbitmap_queue_wake_all(&tags->bitmap_tags);
+	if (include_reserve)
+		sbitmap_queue_wake_all(&tags->breserved_tags);
 }
 
 /*
@@ -118,7 +64,7 @@
  * and attempt to provide a fair share of the tag depth for each of them.
  */
 static inline bool hctx_may_queue(struct blk_mq_hw_ctx *hctx,
-				  struct blk_mq_bitmap_tags *bt)
+				  struct sbitmap_queue *bt)
 {
 	unsigned int depth, users;
 
@@ -130,7 +76,7 @@
 	/*
 	 * Don't try dividing an ant
 	 */
-	if (bt->depth == 1)
+	if (bt->sb.depth == 1)
 		return true;
 
 	users = atomic_read(&hctx->tags->active_queues);
@@ -140,142 +86,36 @@
 	/*
 	 * Allow at least some tags
 	 */
-	depth = max((bt->depth + users - 1) / users, 4U);
+	depth = max((bt->sb.depth + users - 1) / users, 4U);
 	return atomic_read(&hctx->nr_active) < depth;
 }
 
-static int __bt_get_word(struct blk_align_bitmap *bm, unsigned int last_tag,
-			 bool nowrap)
+static int __bt_get(struct blk_mq_hw_ctx *hctx, struct sbitmap_queue *bt)
 {
-	int tag, org_last_tag = last_tag;
-
-	while (1) {
-		tag = find_next_zero_bit(&bm->word, bm->depth, last_tag);
-		if (unlikely(tag >= bm->depth)) {
-			/*
-			 * We started with an offset, and we didn't reset the
-			 * offset to 0 in a failure case, so start from 0 to
-			 * exhaust the map.
-			 */
-			if (org_last_tag && last_tag && !nowrap) {
-				last_tag = org_last_tag = 0;
-				continue;
-			}
-			return -1;
-		}
-
-		if (!test_and_set_bit(tag, &bm->word))
-			break;
-
-		last_tag = tag + 1;
-		if (last_tag >= bm->depth - 1)
-			last_tag = 0;
-	}
-
-	return tag;
-}
-
-#define BT_ALLOC_RR(tags) (tags->alloc_policy == BLK_TAG_ALLOC_RR)
-
-/*
- * Straight forward bitmap tag implementation, where each bit is a tag
- * (cleared == free, and set == busy). The small twist is using per-cpu
- * last_tag caches, which blk-mq stores in the blk_mq_ctx software queue
- * contexts. This enables us to drastically limit the space searched,
- * without dirtying an extra shared cacheline like we would if we stored
- * the cache value inside the shared blk_mq_bitmap_tags structure. On top
- * of that, each word of tags is in a separate cacheline. This means that
- * multiple users will tend to stick to different cachelines, at least
- * until the map is exhausted.
- */
-static int __bt_get(struct blk_mq_hw_ctx *hctx, struct blk_mq_bitmap_tags *bt,
-		    unsigned int *tag_cache, struct blk_mq_tags *tags)
-{
-	unsigned int last_tag, org_last_tag;
-	int index, i, tag;
-
 	if (!hctx_may_queue(hctx, bt))
 		return -1;
-
-	last_tag = org_last_tag = *tag_cache;
-	index = TAG_TO_INDEX(bt, last_tag);
-
-	for (i = 0; i < bt->map_nr; i++) {
-		tag = __bt_get_word(&bt->map[index], TAG_TO_BIT(bt, last_tag),
-				    BT_ALLOC_RR(tags));
-		if (tag != -1) {
-			tag += (index << bt->bits_per_word);
-			goto done;
-		}
-
-		/*
-		 * Jump to next index, and reset the last tag to be the
-		 * first tag of that index
-		 */
-		index++;
-		last_tag = (index << bt->bits_per_word);
-
-		if (index >= bt->map_nr) {
-			index = 0;
-			last_tag = 0;
-		}
-	}
-
-	*tag_cache = 0;
-	return -1;
-
-	/*
-	 * Only update the cache from the allocation path, if we ended
-	 * up using the specific cached tag.
-	 */
-done:
-	if (tag == org_last_tag || unlikely(BT_ALLOC_RR(tags))) {
-		last_tag = tag + 1;
-		if (last_tag >= bt->depth - 1)
-			last_tag = 0;
-
-		*tag_cache = last_tag;
-	}
-
-	return tag;
+	return __sbitmap_queue_get(bt);
 }
 
-static struct bt_wait_state *bt_wait_ptr(struct blk_mq_bitmap_tags *bt,
-					 struct blk_mq_hw_ctx *hctx)
+static int bt_get(struct blk_mq_alloc_data *data, struct sbitmap_queue *bt,
+		  struct blk_mq_hw_ctx *hctx, struct blk_mq_tags *tags)
 {
-	struct bt_wait_state *bs;
-	int wait_index;
-
-	if (!hctx)
-		return &bt->bs[0];
-
-	wait_index = atomic_read(&hctx->wait_index);
-	bs = &bt->bs[wait_index];
-	bt_index_atomic_inc(&hctx->wait_index);
-	return bs;
-}
-
-static int bt_get(struct blk_mq_alloc_data *data,
-		struct blk_mq_bitmap_tags *bt,
-		struct blk_mq_hw_ctx *hctx,
-		unsigned int *last_tag, struct blk_mq_tags *tags)
-{
-	struct bt_wait_state *bs;
+	struct sbq_wait_state *ws;
 	DEFINE_WAIT(wait);
 	int tag;
 
-	tag = __bt_get(hctx, bt, last_tag, tags);
+	tag = __bt_get(hctx, bt);
 	if (tag != -1)
 		return tag;
 
 	if (data->flags & BLK_MQ_REQ_NOWAIT)
 		return -1;
 
-	bs = bt_wait_ptr(bt, hctx);
+	ws = bt_wait_ptr(bt, hctx);
 	do {
-		prepare_to_wait(&bs->wait, &wait, TASK_UNINTERRUPTIBLE);
+		prepare_to_wait(&ws->wait, &wait, TASK_UNINTERRUPTIBLE);
 
-		tag = __bt_get(hctx, bt, last_tag, tags);
+		tag = __bt_get(hctx, bt);
 		if (tag != -1)
 			break;
 
@@ -292,7 +132,7 @@
 		 * Retry tag allocation after running the hardware queue,
 		 * as running the queue may also have found completions.
 		 */
-		tag = __bt_get(hctx, bt, last_tag, tags);
+		tag = __bt_get(hctx, bt);
 		if (tag != -1)
 			break;
 
@@ -306,15 +146,14 @@
 		if (data->flags & BLK_MQ_REQ_RESERVED) {
 			bt = &data->hctx->tags->breserved_tags;
 		} else {
-			last_tag = &data->ctx->last_tag;
 			hctx = data->hctx;
 			bt = &hctx->tags->bitmap_tags;
 		}
-		finish_wait(&bs->wait, &wait);
-		bs = bt_wait_ptr(bt, hctx);
+		finish_wait(&ws->wait, &wait);
+		ws = bt_wait_ptr(bt, hctx);
 	} while (1);
 
-	finish_wait(&bs->wait, &wait);
+	finish_wait(&ws->wait, &wait);
 	return tag;
 }
 
@@ -323,7 +162,7 @@
 	int tag;
 
 	tag = bt_get(data, &data->hctx->tags->bitmap_tags, data->hctx,
-			&data->ctx->last_tag, data->hctx->tags);
+		     data->hctx->tags);
 	if (tag >= 0)
 		return tag + data->hctx->tags->nr_reserved_tags;
 
@@ -332,15 +171,15 @@
 
 static unsigned int __blk_mq_get_reserved_tag(struct blk_mq_alloc_data *data)
 {
-	int tag, zero = 0;
+	int tag;
 
 	if (unlikely(!data->hctx->tags->nr_reserved_tags)) {
 		WARN_ON_ONCE(1);
 		return BLK_MQ_TAG_FAIL;
 	}
 
-	tag = bt_get(data, &data->hctx->tags->breserved_tags, NULL, &zero,
-		data->hctx->tags);
+	tag = bt_get(data, &data->hctx->tags->breserved_tags, NULL,
+		     data->hctx->tags);
 	if (tag < 0)
 		return BLK_MQ_TAG_FAIL;
 
@@ -354,55 +193,8 @@
 	return __blk_mq_get_tag(data);
 }
 
-static struct bt_wait_state *bt_wake_ptr(struct blk_mq_bitmap_tags *bt)
-{
-	int i, wake_index;
-
-	wake_index = atomic_read(&bt->wake_index);
-	for (i = 0; i < BT_WAIT_QUEUES; i++) {
-		struct bt_wait_state *bs = &bt->bs[wake_index];
-
-		if (waitqueue_active(&bs->wait)) {
-			int o = atomic_read(&bt->wake_index);
-			if (wake_index != o)
-				atomic_cmpxchg(&bt->wake_index, o, wake_index);
-
-			return bs;
-		}
-
-		wake_index = bt_index_inc(wake_index);
-	}
-
-	return NULL;
-}
-
-static void bt_clear_tag(struct blk_mq_bitmap_tags *bt, unsigned int tag)
-{
-	const int index = TAG_TO_INDEX(bt, tag);
-	struct bt_wait_state *bs;
-	int wait_cnt;
-
-	clear_bit(TAG_TO_BIT(bt, tag), &bt->map[index].word);
-
-	/* Ensure that the wait list checks occur after clear_bit(). */
-	smp_mb();
-
-	bs = bt_wake_ptr(bt);
-	if (!bs)
-		return;
-
-	wait_cnt = atomic_dec_return(&bs->wait_cnt);
-	if (unlikely(wait_cnt < 0))
-		wait_cnt = atomic_inc_return(&bs->wait_cnt);
-	if (wait_cnt == 0) {
-		atomic_add(bt->wake_cnt, &bs->wait_cnt);
-		bt_index_atomic_inc(&bt->wake_index);
-		wake_up(&bs->wait);
-	}
-}
-
-void blk_mq_put_tag(struct blk_mq_hw_ctx *hctx, unsigned int tag,
-		    unsigned int *last_tag)
+void blk_mq_put_tag(struct blk_mq_hw_ctx *hctx, struct blk_mq_ctx *ctx,
+		    unsigned int tag)
 {
 	struct blk_mq_tags *tags = hctx->tags;
 
@@ -410,67 +202,92 @@
 		const int real_tag = tag - tags->nr_reserved_tags;
 
 		BUG_ON(real_tag >= tags->nr_tags);
-		bt_clear_tag(&tags->bitmap_tags, real_tag);
-		if (likely(tags->alloc_policy == BLK_TAG_ALLOC_FIFO))
-			*last_tag = real_tag;
+		sbitmap_queue_clear(&tags->bitmap_tags, real_tag, ctx->cpu);
 	} else {
 		BUG_ON(tag >= tags->nr_reserved_tags);
-		bt_clear_tag(&tags->breserved_tags, tag);
+		sbitmap_queue_clear(&tags->breserved_tags, tag, ctx->cpu);
 	}
 }
 
-static void bt_for_each(struct blk_mq_hw_ctx *hctx,
-		struct blk_mq_bitmap_tags *bt, unsigned int off,
-		busy_iter_fn *fn, void *data, bool reserved)
+struct bt_iter_data {
+	struct blk_mq_hw_ctx *hctx;
+	busy_iter_fn *fn;
+	void *data;
+	bool reserved;
+};
+
+static bool bt_iter(struct sbitmap *bitmap, unsigned int bitnr, void *data)
 {
+	struct bt_iter_data *iter_data = data;
+	struct blk_mq_hw_ctx *hctx = iter_data->hctx;
+	struct blk_mq_tags *tags = hctx->tags;
+	bool reserved = iter_data->reserved;
 	struct request *rq;
-	int bit, i;
 
-	for (i = 0; i < bt->map_nr; i++) {
-		struct blk_align_bitmap *bm = &bt->map[i];
+	if (!reserved)
+		bitnr += tags->nr_reserved_tags;
+	rq = tags->rqs[bitnr];
 
-		for (bit = find_first_bit(&bm->word, bm->depth);
-		     bit < bm->depth;
-		     bit = find_next_bit(&bm->word, bm->depth, bit + 1)) {
-			rq = hctx->tags->rqs[off + bit];
-			if (rq->q == hctx->queue)
-				fn(hctx, rq, data, reserved);
-		}
-
-		off += (1 << bt->bits_per_word);
-	}
+	if (rq->q == hctx->queue)
+		iter_data->fn(hctx, rq, iter_data->data, reserved);
+	return true;
 }
 
-static void bt_tags_for_each(struct blk_mq_tags *tags,
-		struct blk_mq_bitmap_tags *bt, unsigned int off,
-		busy_tag_iter_fn *fn, void *data, bool reserved)
+static void bt_for_each(struct blk_mq_hw_ctx *hctx, struct sbitmap_queue *bt,
+			busy_iter_fn *fn, void *data, bool reserved)
 {
+	struct bt_iter_data iter_data = {
+		.hctx = hctx,
+		.fn = fn,
+		.data = data,
+		.reserved = reserved,
+	};
+
+	sbitmap_for_each_set(&bt->sb, bt_iter, &iter_data);
+}
+
+struct bt_tags_iter_data {
+	struct blk_mq_tags *tags;
+	busy_tag_iter_fn *fn;
+	void *data;
+	bool reserved;
+};
+
+static bool bt_tags_iter(struct sbitmap *bitmap, unsigned int bitnr, void *data)
+{
+	struct bt_tags_iter_data *iter_data = data;
+	struct blk_mq_tags *tags = iter_data->tags;
+	bool reserved = iter_data->reserved;
 	struct request *rq;
-	int bit, i;
 
-	if (!tags->rqs)
-		return;
-	for (i = 0; i < bt->map_nr; i++) {
-		struct blk_align_bitmap *bm = &bt->map[i];
+	if (!reserved)
+		bitnr += tags->nr_reserved_tags;
+	rq = tags->rqs[bitnr];
 
-		for (bit = find_first_bit(&bm->word, bm->depth);
-		     bit < bm->depth;
-		     bit = find_next_bit(&bm->word, bm->depth, bit + 1)) {
-			rq = tags->rqs[off + bit];
-			fn(rq, data, reserved);
-		}
+	iter_data->fn(rq, iter_data->data, reserved);
+	return true;
+}
 
-		off += (1 << bt->bits_per_word);
-	}
+static void bt_tags_for_each(struct blk_mq_tags *tags, struct sbitmap_queue *bt,
+			     busy_tag_iter_fn *fn, void *data, bool reserved)
+{
+	struct bt_tags_iter_data iter_data = {
+		.tags = tags,
+		.fn = fn,
+		.data = data,
+		.reserved = reserved,
+	};
+
+	if (tags->rqs)
+		sbitmap_for_each_set(&bt->sb, bt_tags_iter, &iter_data);
 }
 
 static void blk_mq_all_tag_busy_iter(struct blk_mq_tags *tags,
 		busy_tag_iter_fn *fn, void *priv)
 {
 	if (tags->nr_reserved_tags)
-		bt_tags_for_each(tags, &tags->breserved_tags, 0, fn, priv, true);
-	bt_tags_for_each(tags, &tags->bitmap_tags, tags->nr_reserved_tags, fn, priv,
-			false);
+		bt_tags_for_each(tags, &tags->breserved_tags, fn, priv, true);
+	bt_tags_for_each(tags, &tags->bitmap_tags, fn, priv, false);
 }
 
 void blk_mq_tagset_busy_iter(struct blk_mq_tag_set *tagset,
@@ -529,124 +346,40 @@
 			continue;
 
 		if (tags->nr_reserved_tags)
-			bt_for_each(hctx, &tags->breserved_tags, 0, fn, priv, true);
-		bt_for_each(hctx, &tags->bitmap_tags, tags->nr_reserved_tags, fn, priv,
-		      false);
+			bt_for_each(hctx, &tags->breserved_tags, fn, priv, true);
+		bt_for_each(hctx, &tags->bitmap_tags, fn, priv, false);
 	}
 
 }
 
-static unsigned int bt_unused_tags(struct blk_mq_bitmap_tags *bt)
+static unsigned int bt_unused_tags(const struct sbitmap_queue *bt)
 {
-	unsigned int i, used;
-
-	for (i = 0, used = 0; i < bt->map_nr; i++) {
-		struct blk_align_bitmap *bm = &bt->map[i];
-
-		used += bitmap_weight(&bm->word, bm->depth);
-	}
-
-	return bt->depth - used;
+	return bt->sb.depth - sbitmap_weight(&bt->sb);
 }
 
-static void bt_update_count(struct blk_mq_bitmap_tags *bt,
-			    unsigned int depth)
+static int bt_alloc(struct sbitmap_queue *bt, unsigned int depth,
+		    bool round_robin, int node)
 {
-	unsigned int tags_per_word = 1U << bt->bits_per_word;
-	unsigned int map_depth = depth;
-
-	if (depth) {
-		int i;
-
-		for (i = 0; i < bt->map_nr; i++) {
-			bt->map[i].depth = min(map_depth, tags_per_word);
-			map_depth -= bt->map[i].depth;
-		}
-	}
-
-	bt->wake_cnt = BT_WAIT_BATCH;
-	if (bt->wake_cnt > depth / BT_WAIT_QUEUES)
-		bt->wake_cnt = max(1U, depth / BT_WAIT_QUEUES);
-
-	bt->depth = depth;
-}
-
-static int bt_alloc(struct blk_mq_bitmap_tags *bt, unsigned int depth,
-			int node, bool reserved)
-{
-	int i;
-
-	bt->bits_per_word = ilog2(BITS_PER_LONG);
-
-	/*
-	 * Depth can be zero for reserved tags, that's not a failure
-	 * condition.
-	 */
-	if (depth) {
-		unsigned int nr, tags_per_word;
-
-		tags_per_word = (1 << bt->bits_per_word);
-
-		/*
-		 * If the tag space is small, shrink the number of tags
-		 * per word so we spread over a few cachelines, at least.
-		 * If less than 4 tags, just forget about it, it's not
-		 * going to work optimally anyway.
-		 */
-		if (depth >= 4) {
-			while (tags_per_word * 4 > depth) {
-				bt->bits_per_word--;
-				tags_per_word = (1 << bt->bits_per_word);
-			}
-		}
-
-		nr = ALIGN(depth, tags_per_word) / tags_per_word;
-		bt->map = kzalloc_node(nr * sizeof(struct blk_align_bitmap),
-						GFP_KERNEL, node);
-		if (!bt->map)
-			return -ENOMEM;
-
-		bt->map_nr = nr;
-	}
-
-	bt->bs = kzalloc(BT_WAIT_QUEUES * sizeof(*bt->bs), GFP_KERNEL);
-	if (!bt->bs) {
-		kfree(bt->map);
-		bt->map = NULL;
-		return -ENOMEM;
-	}
-
-	bt_update_count(bt, depth);
-
-	for (i = 0; i < BT_WAIT_QUEUES; i++) {
-		init_waitqueue_head(&bt->bs[i].wait);
-		atomic_set(&bt->bs[i].wait_cnt, bt->wake_cnt);
-	}
-
-	return 0;
-}
-
-static void bt_free(struct blk_mq_bitmap_tags *bt)
-{
-	kfree(bt->map);
-	kfree(bt->bs);
+	return sbitmap_queue_init_node(bt, depth, -1, round_robin, GFP_KERNEL,
+				       node);
 }
 
 static struct blk_mq_tags *blk_mq_init_bitmap_tags(struct blk_mq_tags *tags,
 						   int node, int alloc_policy)
 {
 	unsigned int depth = tags->nr_tags - tags->nr_reserved_tags;
+	bool round_robin = alloc_policy == BLK_TAG_ALLOC_RR;
 
-	tags->alloc_policy = alloc_policy;
-
-	if (bt_alloc(&tags->bitmap_tags, depth, node, false))
-		goto enomem;
-	if (bt_alloc(&tags->breserved_tags, tags->nr_reserved_tags, node, true))
-		goto enomem;
+	if (bt_alloc(&tags->bitmap_tags, depth, round_robin, node))
+		goto free_tags;
+	if (bt_alloc(&tags->breserved_tags, tags->nr_reserved_tags, round_robin,
+		     node))
+		goto free_bitmap_tags;
 
 	return tags;
-enomem:
-	bt_free(&tags->bitmap_tags);
+free_bitmap_tags:
+	sbitmap_queue_free(&tags->bitmap_tags);
+free_tags:
 	kfree(tags);
 	return NULL;
 }
@@ -679,19 +412,12 @@
 
 void blk_mq_free_tags(struct blk_mq_tags *tags)
 {
-	bt_free(&tags->bitmap_tags);
-	bt_free(&tags->breserved_tags);
+	sbitmap_queue_free(&tags->bitmap_tags);
+	sbitmap_queue_free(&tags->breserved_tags);
 	free_cpumask_var(tags->cpumask);
 	kfree(tags);
 }
 
-void blk_mq_tag_init_last_tag(struct blk_mq_tags *tags, unsigned int *tag)
-{
-	unsigned int depth = tags->nr_tags - tags->nr_reserved_tags;
-
-	*tag = prandom_u32() % depth;
-}
-
 int blk_mq_tag_update_depth(struct blk_mq_tags *tags, unsigned int tdepth)
 {
 	tdepth -= tags->nr_reserved_tags;
@@ -702,7 +428,8 @@
 	 * Don't need (or can't) update reserved tags here, they remain
 	 * static and should never need resizing.
 	 */
-	bt_update_count(&tags->bitmap_tags, tdepth);
+	sbitmap_queue_resize(&tags->bitmap_tags, tdepth);
+
 	blk_mq_tag_wakeup_all(tags, false);
 	return 0;
 }
@@ -746,7 +473,7 @@
 	page += sprintf(page, "nr_tags=%u, reserved_tags=%u, "
 			"bits_per_word=%u\n",
 			tags->nr_tags, tags->nr_reserved_tags,
-			tags->bitmap_tags.bits_per_word);
+			1U << tags->bitmap_tags.sb.shift);
 
 	free = bt_unused_tags(&tags->bitmap_tags);
 	res = bt_unused_tags(&tags->breserved_tags);
diff --git a/block/blk-mq-tag.h b/block/blk-mq-tag.h
index d468a79..09f4cc0 100644
--- a/block/blk-mq-tag.h
+++ b/block/blk-mq-tag.h
@@ -3,31 +3,6 @@
 
 #include "blk-mq.h"
 
-enum {
-	BT_WAIT_QUEUES	= 8,
-	BT_WAIT_BATCH	= 8,
-};
-
-struct bt_wait_state {
-	atomic_t wait_cnt;
-	wait_queue_head_t wait;
-} ____cacheline_aligned_in_smp;
-
-#define TAG_TO_INDEX(bt, tag)	((tag) >> (bt)->bits_per_word)
-#define TAG_TO_BIT(bt, tag)	((tag) & ((1 << (bt)->bits_per_word) - 1))
-
-struct blk_mq_bitmap_tags {
-	unsigned int depth;
-	unsigned int wake_cnt;
-	unsigned int bits_per_word;
-
-	unsigned int map_nr;
-	struct blk_align_bitmap *map;
-
-	atomic_t wake_index;
-	struct bt_wait_state *bs;
-};
-
 /*
  * Tag address space map.
  */
@@ -37,13 +12,12 @@
 
 	atomic_t active_queues;
 
-	struct blk_mq_bitmap_tags bitmap_tags;
-	struct blk_mq_bitmap_tags breserved_tags;
+	struct sbitmap_queue bitmap_tags;
+	struct sbitmap_queue breserved_tags;
 
 	struct request **rqs;
 	struct list_head page_list;
 
-	int alloc_policy;
 	cpumask_var_t cpumask;
 };
 
@@ -52,15 +26,23 @@
 extern void blk_mq_free_tags(struct blk_mq_tags *tags);
 
 extern unsigned int blk_mq_get_tag(struct blk_mq_alloc_data *data);
-extern void blk_mq_put_tag(struct blk_mq_hw_ctx *hctx, unsigned int tag, unsigned int *last_tag);
+extern void blk_mq_put_tag(struct blk_mq_hw_ctx *hctx, struct blk_mq_ctx *ctx,
+			   unsigned int tag);
 extern bool blk_mq_has_free_tags(struct blk_mq_tags *tags);
 extern ssize_t blk_mq_tag_sysfs_show(struct blk_mq_tags *tags, char *page);
-extern void blk_mq_tag_init_last_tag(struct blk_mq_tags *tags, unsigned int *last_tag);
 extern int blk_mq_tag_update_depth(struct blk_mq_tags *tags, unsigned int depth);
 extern void blk_mq_tag_wakeup_all(struct blk_mq_tags *tags, bool);
 void blk_mq_queue_tag_busy_iter(struct request_queue *q, busy_iter_fn *fn,
 		void *priv);
 
+static inline struct sbq_wait_state *bt_wait_ptr(struct sbitmap_queue *bt,
+						 struct blk_mq_hw_ctx *hctx)
+{
+	if (!hctx)
+		return &bt->ws[0];
+	return sbq_wait_ptr(bt, &hctx->wait_index);
+}
+
 enum {
 	BLK_MQ_TAG_CACHE_MIN	= 1,
 	BLK_MQ_TAG_CACHE_MAX	= 64,
diff --git a/block/blk-mq.c b/block/blk-mq.c
index c207fa9..dc5f47f 100644
--- a/block/blk-mq.c
+++ b/block/blk-mq.c
@@ -22,6 +22,7 @@
 #include <linux/sched/sysctl.h>
 #include <linux/delay.h>
 #include <linux/crash_dump.h>
+#include <linux/prefetch.h>
 
 #include <trace/events/block.h>
 
@@ -33,49 +34,28 @@
 static DEFINE_MUTEX(all_q_mutex);
 static LIST_HEAD(all_q_list);
 
-static void __blk_mq_run_hw_queue(struct blk_mq_hw_ctx *hctx);
-
 /*
  * Check if any of the ctx's have pending work in this hardware queue
  */
 static bool blk_mq_hctx_has_pending(struct blk_mq_hw_ctx *hctx)
 {
-	unsigned int i;
-
-	for (i = 0; i < hctx->ctx_map.size; i++)
-		if (hctx->ctx_map.map[i].word)
-			return true;
-
-	return false;
+	return sbitmap_any_bit_set(&hctx->ctx_map);
 }
 
-static inline struct blk_align_bitmap *get_bm(struct blk_mq_hw_ctx *hctx,
-					      struct blk_mq_ctx *ctx)
-{
-	return &hctx->ctx_map.map[ctx->index_hw / hctx->ctx_map.bits_per_word];
-}
-
-#define CTX_TO_BIT(hctx, ctx)	\
-	((ctx)->index_hw & ((hctx)->ctx_map.bits_per_word - 1))
-
 /*
  * Mark this ctx as having pending work in this hardware queue
  */
 static void blk_mq_hctx_mark_pending(struct blk_mq_hw_ctx *hctx,
 				     struct blk_mq_ctx *ctx)
 {
-	struct blk_align_bitmap *bm = get_bm(hctx, ctx);
-
-	if (!test_bit(CTX_TO_BIT(hctx, ctx), &bm->word))
-		set_bit(CTX_TO_BIT(hctx, ctx), &bm->word);
+	if (!sbitmap_test_bit(&hctx->ctx_map, ctx->index_hw))
+		sbitmap_set_bit(&hctx->ctx_map, ctx->index_hw);
 }
 
 static void blk_mq_hctx_clear_pending(struct blk_mq_hw_ctx *hctx,
 				      struct blk_mq_ctx *ctx)
 {
-	struct blk_align_bitmap *bm = get_bm(hctx, ctx);
-
-	clear_bit(CTX_TO_BIT(hctx, ctx), &bm->word);
+	sbitmap_clear_bit(&hctx->ctx_map, ctx->index_hw);
 }
 
 void blk_mq_freeze_queue_start(struct request_queue *q)
@@ -246,19 +226,9 @@
 	ctx = blk_mq_get_ctx(q);
 	hctx = q->mq_ops->map_queue(q, ctx->cpu);
 	blk_mq_set_alloc_data(&alloc_data, q, flags, ctx, hctx);
-
 	rq = __blk_mq_alloc_request(&alloc_data, rw, 0);
-	if (!rq && !(flags & BLK_MQ_REQ_NOWAIT)) {
-		__blk_mq_run_hw_queue(hctx);
-		blk_mq_put_ctx(ctx);
-
-		ctx = blk_mq_get_ctx(q);
-		hctx = q->mq_ops->map_queue(q, ctx->cpu);
-		blk_mq_set_alloc_data(&alloc_data, q, flags, ctx, hctx);
-		rq =  __blk_mq_alloc_request(&alloc_data, rw, 0);
-		ctx = alloc_data.ctx;
-	}
 	blk_mq_put_ctx(ctx);
+
 	if (!rq) {
 		blk_queue_exit(q);
 		return ERR_PTR(-EWOULDBLOCK);
@@ -333,7 +303,7 @@
 	rq->cmd_flags = 0;
 
 	clear_bit(REQ_ATOM_STARTED, &rq->atomic_flags);
-	blk_mq_put_tag(hctx, tag, &ctx->last_tag);
+	blk_mq_put_tag(hctx, ctx, tag);
 	blk_queue_exit(q);
 }
 
@@ -513,7 +483,7 @@
 static void blk_mq_requeue_work(struct work_struct *work)
 {
 	struct request_queue *q =
-		container_of(work, struct request_queue, requeue_work);
+		container_of(work, struct request_queue, requeue_work.work);
 	LIST_HEAD(rq_list);
 	struct request *rq, *next;
 	unsigned long flags;
@@ -568,16 +538,24 @@
 
 void blk_mq_cancel_requeue_work(struct request_queue *q)
 {
-	cancel_work_sync(&q->requeue_work);
+	cancel_delayed_work_sync(&q->requeue_work);
 }
 EXPORT_SYMBOL_GPL(blk_mq_cancel_requeue_work);
 
 void blk_mq_kick_requeue_list(struct request_queue *q)
 {
-	kblockd_schedule_work(&q->requeue_work);
+	kblockd_schedule_delayed_work(&q->requeue_work, 0);
 }
 EXPORT_SYMBOL(blk_mq_kick_requeue_list);
 
+void blk_mq_delay_kick_requeue_list(struct request_queue *q,
+				    unsigned long msecs)
+{
+	kblockd_schedule_delayed_work(&q->requeue_work,
+				      msecs_to_jiffies(msecs));
+}
+EXPORT_SYMBOL(blk_mq_delay_kick_requeue_list);
+
 void blk_mq_abort_requeue_list(struct request_queue *q)
 {
 	unsigned long flags;
@@ -600,8 +578,10 @@
 
 struct request *blk_mq_tag_to_rq(struct blk_mq_tags *tags, unsigned int tag)
 {
-	if (tag < tags->nr_tags)
+	if (tag < tags->nr_tags) {
+		prefetch(tags->rqs[tag]);
 		return tags->rqs[tag];
+	}
 
 	return NULL;
 }
@@ -756,38 +736,44 @@
 	return false;
 }
 
+struct flush_busy_ctx_data {
+	struct blk_mq_hw_ctx *hctx;
+	struct list_head *list;
+};
+
+static bool flush_busy_ctx(struct sbitmap *sb, unsigned int bitnr, void *data)
+{
+	struct flush_busy_ctx_data *flush_data = data;
+	struct blk_mq_hw_ctx *hctx = flush_data->hctx;
+	struct blk_mq_ctx *ctx = hctx->ctxs[bitnr];
+
+	sbitmap_clear_bit(sb, bitnr);
+	spin_lock(&ctx->lock);
+	list_splice_tail_init(&ctx->rq_list, flush_data->list);
+	spin_unlock(&ctx->lock);
+	return true;
+}
+
 /*
  * Process software queues that have been marked busy, splicing them
  * to the for-dispatch
  */
 static void flush_busy_ctxs(struct blk_mq_hw_ctx *hctx, struct list_head *list)
 {
-	struct blk_mq_ctx *ctx;
-	int i;
+	struct flush_busy_ctx_data data = {
+		.hctx = hctx,
+		.list = list,
+	};
 
-	for (i = 0; i < hctx->ctx_map.size; i++) {
-		struct blk_align_bitmap *bm = &hctx->ctx_map.map[i];
-		unsigned int off, bit;
+	sbitmap_for_each_set(&hctx->ctx_map, flush_busy_ctx, &data);
+}
 
-		if (!bm->word)
-			continue;
+static inline unsigned int queued_to_index(unsigned int queued)
+{
+	if (!queued)
+		return 0;
 
-		bit = 0;
-		off = i * hctx->ctx_map.bits_per_word;
-		do {
-			bit = find_next_bit(&bm->word, bm->depth, bit);
-			if (bit >= bm->depth)
-				break;
-
-			ctx = hctx->ctxs[bit + off];
-			clear_bit(bit, &bm->word);
-			spin_lock(&ctx->lock);
-			list_splice_tail_init(&ctx->rq_list, list);
-			spin_unlock(&ctx->lock);
-
-			bit++;
-		} while (1);
-	}
+	return min(BLK_MQ_MAX_DISPATCH_ORDER - 1, ilog2(queued) + 1);
 }
 
 /*
@@ -878,10 +864,7 @@
 			dptr = &driver_list;
 	}
 
-	if (!queued)
-		hctx->dispatched[0]++;
-	else if (queued < (1 << (BLK_MQ_MAX_DISPATCH_ORDER - 1)))
-		hctx->dispatched[ilog2(queued) + 1]++;
+	hctx->dispatched[queued_to_index(queued)]++;
 
 	/*
 	 * Any items that need requeuing? Stuff them into hctx->dispatch,
@@ -937,7 +920,7 @@
 	    !blk_mq_hw_queue_mapped(hctx)))
 		return;
 
-	if (!async) {
+	if (!async && !(hctx->flags & BLK_MQ_F_BLOCKING)) {
 		int cpu = get_cpu();
 		if (cpumask_test_cpu(cpu, hctx->cpumask)) {
 			__blk_mq_run_hw_queue(hctx);
@@ -948,8 +931,7 @@
 		put_cpu();
 	}
 
-	kblockd_schedule_delayed_work_on(blk_mq_hctx_next_cpu(hctx),
-			&hctx->run_work, 0);
+	kblockd_schedule_work_on(blk_mq_hctx_next_cpu(hctx), &hctx->run_work);
 }
 
 void blk_mq_run_hw_queues(struct request_queue *q, bool async)
@@ -970,7 +952,7 @@
 
 void blk_mq_stop_hw_queue(struct blk_mq_hw_ctx *hctx)
 {
-	cancel_delayed_work(&hctx->run_work);
+	cancel_work(&hctx->run_work);
 	cancel_delayed_work(&hctx->delay_work);
 	set_bit(BLK_MQ_S_STOPPED, &hctx->state);
 }
@@ -1023,7 +1005,7 @@
 {
 	struct blk_mq_hw_ctx *hctx;
 
-	hctx = container_of(work, struct blk_mq_hw_ctx, run_work.work);
+	hctx = container_of(work, struct blk_mq_hw_ctx, run_work);
 
 	__blk_mq_run_hw_queue(hctx);
 }
@@ -1240,20 +1222,8 @@
 		op_flags |= REQ_SYNC;
 
 	trace_block_getrq(q, bio, op);
-	blk_mq_set_alloc_data(&alloc_data, q, BLK_MQ_REQ_NOWAIT, ctx, hctx);
+	blk_mq_set_alloc_data(&alloc_data, q, 0, ctx, hctx);
 	rq = __blk_mq_alloc_request(&alloc_data, op, op_flags);
-	if (unlikely(!rq)) {
-		__blk_mq_run_hw_queue(hctx);
-		blk_mq_put_ctx(ctx);
-		trace_block_sleeprq(q, bio, op);
-
-		ctx = blk_mq_get_ctx(q);
-		hctx = q->mq_ops->map_queue(q, ctx->cpu);
-		blk_mq_set_alloc_data(&alloc_data, q, 0, ctx, hctx);
-		rq = __blk_mq_alloc_request(&alloc_data, op, op_flags);
-		ctx = alloc_data.ctx;
-		hctx = alloc_data.hctx;
-	}
 
 	hctx->queued++;
 	data->hctx = hctx;
@@ -1606,32 +1576,6 @@
 	return NULL;
 }
 
-static void blk_mq_free_bitmap(struct blk_mq_ctxmap *bitmap)
-{
-	kfree(bitmap->map);
-}
-
-static int blk_mq_alloc_bitmap(struct blk_mq_ctxmap *bitmap, int node)
-{
-	unsigned int bpw = 8, total, num_maps, i;
-
-	bitmap->bits_per_word = bpw;
-
-	num_maps = ALIGN(nr_cpu_ids, bpw) / bpw;
-	bitmap->map = kzalloc_node(num_maps * sizeof(struct blk_align_bitmap),
-					GFP_KERNEL, node);
-	if (!bitmap->map)
-		return -ENOMEM;
-
-	total = nr_cpu_ids;
-	for (i = 0; i < num_maps; i++) {
-		bitmap->map[i].depth = min(total, bitmap->bits_per_word);
-		total -= bitmap->map[i].depth;
-	}
-
-	return 0;
-}
-
 /*
  * 'cpu' is going away. splice any existing rq_list entries from this
  * software queue to the hw queue dispatch list, and ensure that it
@@ -1697,7 +1641,7 @@
 
 	blk_mq_unregister_cpu_notifier(&hctx->cpu_notifier);
 	blk_free_flush_queue(hctx->fq);
-	blk_mq_free_bitmap(&hctx->ctx_map);
+	sbitmap_free(&hctx->ctx_map);
 }
 
 static void blk_mq_exit_hw_queues(struct request_queue *q,
@@ -1734,7 +1678,7 @@
 	if (node == NUMA_NO_NODE)
 		node = hctx->numa_node = set->numa_node;
 
-	INIT_DELAYED_WORK(&hctx->run_work, blk_mq_run_work_fn);
+	INIT_WORK(&hctx->run_work, blk_mq_run_work_fn);
 	INIT_DELAYED_WORK(&hctx->delay_work, blk_mq_delay_work_fn);
 	spin_lock_init(&hctx->lock);
 	INIT_LIST_HEAD(&hctx->dispatch);
@@ -1757,7 +1701,8 @@
 	if (!hctx->ctxs)
 		goto unregister_cpu_notifier;
 
-	if (blk_mq_alloc_bitmap(&hctx->ctx_map, node))
+	if (sbitmap_init_node(&hctx->ctx_map, nr_cpu_ids, ilog2(8), GFP_KERNEL,
+			      node))
 		goto free_ctxs;
 
 	hctx->nr_ctx = 0;
@@ -1784,7 +1729,7 @@
 	if (set->ops->exit_hctx)
 		set->ops->exit_hctx(hctx, hctx_idx);
  free_bitmap:
-	blk_mq_free_bitmap(&hctx->ctx_map);
+	sbitmap_free(&hctx->ctx_map);
  free_ctxs:
 	kfree(hctx->ctxs);
  unregister_cpu_notifier:
@@ -1860,8 +1805,6 @@
 	mutex_unlock(&q->sysfs_lock);
 
 	queue_for_each_hw_ctx(q, hctx, i) {
-		struct blk_mq_ctxmap *map = &hctx->ctx_map;
-
 		/*
 		 * If no software queues are mapped to this hardware queue,
 		 * disable it and free the request entries.
@@ -1887,7 +1830,7 @@
 		 * This is more accurate and more efficient than looping
 		 * over all possibly mapped software queues.
 		 */
-		map->size = DIV_ROUND_UP(hctx->nr_ctx, map->bits_per_word);
+		sbitmap_resize(&hctx->ctx_map, hctx->nr_ctx);
 
 		/*
 		 * Initialize batch roundrobin counts
@@ -2094,7 +2037,7 @@
 
 	q->sg_reserved_size = INT_MAX;
 
-	INIT_WORK(&q->requeue_work, blk_mq_requeue_work);
+	INIT_DELAYED_WORK(&q->requeue_work, blk_mq_requeue_work);
 	INIT_LIST_HEAD(&q->requeue_list);
 	spin_lock_init(&q->requeue_lock);
 
diff --git a/block/blk-mq.h b/block/blk-mq.h
index 9087b11..9b15d2e 100644
--- a/block/blk-mq.h
+++ b/block/blk-mq.h
@@ -12,8 +12,6 @@
 	unsigned int		cpu;
 	unsigned int		index_hw;
 
-	unsigned int		last_tag ____cacheline_aligned_in_smp;
-
 	/* incremented at dispatch time */
 	unsigned long		rq_dispatched[2];
 	unsigned long		rq_merged;
@@ -63,15 +61,6 @@
 
 void blk_mq_release(struct request_queue *q);
 
-/*
- * Basic implementation of sparser bitmap, allowing the user to spread
- * the bits over more cachelines.
- */
-struct blk_align_bitmap {
-	unsigned long word;
-	unsigned long depth;
-} ____cacheline_aligned_in_smp;
-
 static inline struct blk_mq_ctx *__blk_mq_get_ctx(struct request_queue *q,
 					   unsigned int cpu)
 {
diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c
index f87a7e7..9cc8d7c 100644
--- a/block/blk-sysfs.c
+++ b/block/blk-sysfs.c
@@ -704,7 +704,7 @@
 	kobject_uevent(&q->kobj, KOBJ_ADD);
 
 	if (q->mq_ops)
-		blk_mq_register_disk(disk);
+		blk_mq_register_dev(dev, q);
 
 	if (!q->request_fn)
 		return 0;
@@ -729,7 +729,7 @@
 		return;
 
 	if (q->mq_ops)
-		blk_mq_unregister_disk(disk);
+		blk_mq_unregister_dev(disk_to_dev(disk), q);
 
 	if (q->request_fn)
 		elv_unregister_queue(q);
diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
index cc2f6db..5e24d88 100644
--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -3042,7 +3042,6 @@
 	if (ktime_get_ns() < rq->fifo_time)
 		rq = NULL;
 
-	cfq_log_cfqq(cfqq->cfqd, cfqq, "fifo=%p", rq);
 	return rq;
 }
 
@@ -3420,6 +3419,9 @@
 {
 	unsigned int max_dispatch;
 
+	if (cfq_cfqq_must_dispatch(cfqq))
+		return true;
+
 	/*
 	 * Drain async requests before we start sync IO
 	 */
@@ -3511,15 +3513,20 @@
 
 	BUG_ON(RB_EMPTY_ROOT(&cfqq->sort_list));
 
+	rq = cfq_check_fifo(cfqq);
+	if (rq)
+		cfq_mark_cfqq_must_dispatch(cfqq);
+
 	if (!cfq_may_dispatch(cfqd, cfqq))
 		return false;
 
 	/*
 	 * follow expired path, else get first next available
 	 */
-	rq = cfq_check_fifo(cfqq);
 	if (!rq)
 		rq = cfqq->next_rq;
+	else
+		cfq_log_cfqq(cfqq->cfqd, cfqq, "fifo=%p", rq);
 
 	/*
 	 * insert request into driver dispatch list
@@ -3989,7 +3996,7 @@
 	 * if the new request is sync, but the currently running queue is
 	 * not, let the sync request have priority.
 	 */
-	if (rq_is_sync(rq) && !cfq_cfqq_sync(cfqq))
+	if (rq_is_sync(rq) && !cfq_cfqq_sync(cfqq) && !cfq_cfqq_must_dispatch(cfqq))
 		return true;
 
 	/*
diff --git a/drivers/block/mtip32xx/mtip32xx.c b/drivers/block/mtip32xx/mtip32xx.c
index 2aca98e..88c4685 100644
--- a/drivers/block/mtip32xx/mtip32xx.c
+++ b/drivers/block/mtip32xx/mtip32xx.c
@@ -3686,7 +3686,7 @@
 	return -ENODEV;
 }
 
-void mtip_block_release(struct gendisk *disk, fmode_t mode)
+static void mtip_block_release(struct gendisk *disk, fmode_t mode)
 {
 }
 
diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c
index a9e3980..ccfcfc1 100644
--- a/drivers/block/nbd.c
+++ b/drivers/block/nbd.c
@@ -34,33 +34,29 @@
 #include <linux/kthread.h>
 #include <linux/types.h>
 #include <linux/debugfs.h>
+#include <linux/blk-mq.h>
 
 #include <asm/uaccess.h>
 #include <asm/types.h>
 
 #include <linux/nbd.h>
 
+#define NBD_TIMEDOUT			0
+#define NBD_DISCONNECT_REQUESTED	1
+
 struct nbd_device {
 	u32 flags;
+	unsigned long runtime_flags;
 	struct socket * sock;	/* If == NULL, device is not ready, yet	*/
 	int magic;
 
-	spinlock_t queue_lock;
-	struct list_head queue_head;	/* Requests waiting result */
-	struct request *active_req;
-	wait_queue_head_t active_wq;
-	struct list_head waiting_queue;	/* Requests to be sent */
-	wait_queue_head_t waiting_wq;
+	struct blk_mq_tag_set tag_set;
 
 	struct mutex tx_lock;
 	struct gendisk *disk;
 	int blksize;
 	loff_t bytesize;
-	int xmit_timeout;
-	bool timedout;
-	bool disconnect; /* a disconnect has been requested by user */
 
-	struct timer_list timeout_timer;
 	/* protects initialization and shutdown of the socket */
 	spinlock_t sock_lock;
 	struct task_struct *task_recv;
@@ -71,6 +67,11 @@
 #endif
 };
 
+struct nbd_cmd {
+	struct nbd_device *nbd;
+	struct list_head list;
+};
+
 #if IS_ENABLED(CONFIG_DEBUG_FS)
 static struct dentry *nbd_dbg_dir;
 #endif
@@ -83,18 +84,6 @@
 static struct nbd_device *nbd_dev;
 static int max_part;
 
-/*
- * Use just one lock (or at most 1 per NIC). Two arguments for this:
- * 1. Each NIC is essentially a synchronization point for all servers
- *    accessed through that NIC so there's no need to have more locks
- *    than NICs anyway.
- * 2. More locks lead to more "Dirty cache line bouncing" which will slow
- *    down each lock to the point where they're actually slower than just
- *    a single lock.
- * Thanks go to Jens Axboe and Al Viro for their LKML emails explaining this!
- */
-static DEFINE_SPINLOCK(nbd_lock);
-
 static inline struct device *nbd_to_dev(struct nbd_device *nbd)
 {
 	return disk_to_dev(nbd->disk);
@@ -153,18 +142,16 @@
 	return 0;
 }
 
-static void nbd_end_request(struct nbd_device *nbd, struct request *req)
+static void nbd_end_request(struct nbd_cmd *cmd)
 {
+	struct nbd_device *nbd = cmd->nbd;
+	struct request *req = blk_mq_rq_from_pdu(cmd);
 	int error = req->errors ? -EIO : 0;
-	struct request_queue *q = req->q;
-	unsigned long flags;
 
-	dev_dbg(nbd_to_dev(nbd), "request %p: %s\n", req,
+	dev_dbg(nbd_to_dev(nbd), "request %p: %s\n", cmd,
 		error ? "failed" : "done");
 
-	spin_lock_irqsave(q->queue_lock, flags);
-	__blk_end_request_all(req, error);
-	spin_unlock_irqrestore(q->queue_lock, flags);
+	blk_mq_complete_request(req, error);
 }
 
 /*
@@ -172,40 +159,49 @@
  */
 static void sock_shutdown(struct nbd_device *nbd)
 {
-	spin_lock_irq(&nbd->sock_lock);
+	struct socket *sock;
+
+	spin_lock(&nbd->sock_lock);
 
 	if (!nbd->sock) {
 		spin_unlock_irq(&nbd->sock_lock);
 		return;
 	}
 
+	sock = nbd->sock;
 	dev_warn(disk_to_dev(nbd->disk), "shutting down socket\n");
-	kernel_sock_shutdown(nbd->sock, SHUT_RDWR);
-	sockfd_put(nbd->sock);
 	nbd->sock = NULL;
-	spin_unlock_irq(&nbd->sock_lock);
+	spin_unlock(&nbd->sock_lock);
 
-	del_timer(&nbd->timeout_timer);
+	kernel_sock_shutdown(sock, SHUT_RDWR);
+	sockfd_put(sock);
 }
 
-static void nbd_xmit_timeout(unsigned long arg)
+static enum blk_eh_timer_return nbd_xmit_timeout(struct request *req,
+						 bool reserved)
 {
-	struct nbd_device *nbd = (struct nbd_device *)arg;
-	unsigned long flags;
+	struct nbd_cmd *cmd = blk_mq_rq_to_pdu(req);
+	struct nbd_device *nbd = cmd->nbd;
+	struct socket *sock = NULL;
 
-	if (list_empty(&nbd->queue_head))
-		return;
+	spin_lock(&nbd->sock_lock);
 
-	spin_lock_irqsave(&nbd->sock_lock, flags);
+	set_bit(NBD_TIMEDOUT, &nbd->runtime_flags);
 
-	nbd->timedout = true;
+	if (nbd->sock) {
+		sock = nbd->sock;
+		get_file(sock->file);
+	}
 
-	if (nbd->sock)
-		kernel_sock_shutdown(nbd->sock, SHUT_RDWR);
+	spin_unlock(&nbd->sock_lock);
+	if (sock) {
+		kernel_sock_shutdown(sock, SHUT_RDWR);
+		sockfd_put(sock);
+	}
 
-	spin_unlock_irqrestore(&nbd->sock_lock, flags);
-
+	req->errors++;
 	dev_err(nbd_to_dev(nbd), "Connection timed out, shutting down connection\n");
+	return BLK_EH_HANDLED;
 }
 
 /*
@@ -255,9 +251,6 @@
 
 	tsk_restore_flags(current, pflags, PF_MEMALLOC);
 
-	if (!send && nbd->xmit_timeout)
-		mod_timer(&nbd->timeout_timer, jiffies + nbd->xmit_timeout);
-
 	return result;
 }
 
@@ -273,8 +266,9 @@
 }
 
 /* always call with the tx_lock held */
-static int nbd_send_req(struct nbd_device *nbd, struct request *req)
+static int nbd_send_cmd(struct nbd_device *nbd, struct nbd_cmd *cmd)
 {
+	struct request *req = blk_mq_rq_from_pdu(cmd);
 	int result, flags;
 	struct nbd_request request;
 	unsigned long size = blk_rq_bytes(req);
@@ -298,10 +292,10 @@
 		request.from = cpu_to_be64((u64)blk_rq_pos(req) << 9);
 		request.len = htonl(size);
 	}
-	memcpy(request.handle, &req, sizeof(req));
+	memcpy(request.handle, &req->tag, sizeof(req->tag));
 
 	dev_dbg(nbd_to_dev(nbd), "request %p: sending control (%s@%llu,%uB)\n",
-		req, nbdcmd_to_ascii(type),
+		cmd, nbdcmd_to_ascii(type),
 		(unsigned long long)blk_rq_pos(req) << 9, blk_rq_bytes(req));
 	result = sock_xmit(nbd, 1, &request, sizeof(request),
 			(type == NBD_CMD_WRITE) ? MSG_MORE : 0);
@@ -323,7 +317,7 @@
 			if (!rq_iter_last(bvec, iter))
 				flags = MSG_MORE;
 			dev_dbg(nbd_to_dev(nbd), "request %p: sending %d bytes data\n",
-				req, bvec.bv_len);
+				cmd, bvec.bv_len);
 			result = sock_send_bvec(nbd, &bvec, flags);
 			if (result <= 0) {
 				dev_err(disk_to_dev(nbd->disk),
@@ -336,29 +330,6 @@
 	return 0;
 }
 
-static struct request *nbd_find_request(struct nbd_device *nbd,
-					struct request *xreq)
-{
-	struct request *req, *tmp;
-	int err;
-
-	err = wait_event_interruptible(nbd->active_wq, nbd->active_req != xreq);
-	if (unlikely(err))
-		return ERR_PTR(err);
-
-	spin_lock(&nbd->queue_lock);
-	list_for_each_entry_safe(req, tmp, &nbd->queue_head, queuelist) {
-		if (req != xreq)
-			continue;
-		list_del_init(&req->queuelist);
-		spin_unlock(&nbd->queue_lock);
-		return req;
-	}
-	spin_unlock(&nbd->queue_lock);
-
-	return ERR_PTR(-ENOENT);
-}
-
 static inline int sock_recv_bvec(struct nbd_device *nbd, struct bio_vec *bvec)
 {
 	int result;
@@ -370,11 +341,14 @@
 }
 
 /* NULL returned = something went wrong, inform userspace */
-static struct request *nbd_read_stat(struct nbd_device *nbd)
+static struct nbd_cmd *nbd_read_stat(struct nbd_device *nbd)
 {
 	int result;
 	struct nbd_reply reply;
-	struct request *req;
+	struct nbd_cmd *cmd;
+	struct request *req = NULL;
+	u16 hwq;
+	int tag;
 
 	reply.magic = 0;
 	result = sock_xmit(nbd, 0, &reply, sizeof(reply), MSG_WAITALL);
@@ -390,25 +364,27 @@
 		return ERR_PTR(-EPROTO);
 	}
 
-	req = nbd_find_request(nbd, *(struct request **)reply.handle);
-	if (IS_ERR(req)) {
-		result = PTR_ERR(req);
-		if (result != -ENOENT)
-			return ERR_PTR(result);
+	memcpy(&tag, reply.handle, sizeof(int));
 
-		dev_err(disk_to_dev(nbd->disk), "Unexpected reply (%p)\n",
-			reply.handle);
-		return ERR_PTR(-EBADR);
+	hwq = blk_mq_unique_tag_to_hwq(tag);
+	if (hwq < nbd->tag_set.nr_hw_queues)
+		req = blk_mq_tag_to_rq(nbd->tag_set.tags[hwq],
+				       blk_mq_unique_tag_to_tag(tag));
+	if (!req || !blk_mq_request_started(req)) {
+		dev_err(disk_to_dev(nbd->disk), "Unexpected reply (%d) %p\n",
+			tag, req);
+		return ERR_PTR(-ENOENT);
 	}
+	cmd = blk_mq_rq_to_pdu(req);
 
 	if (ntohl(reply.error)) {
 		dev_err(disk_to_dev(nbd->disk), "Other side returned error (%d)\n",
 			ntohl(reply.error));
 		req->errors++;
-		return req;
+		return cmd;
 	}
 
-	dev_dbg(nbd_to_dev(nbd), "request %p: got reply\n", req);
+	dev_dbg(nbd_to_dev(nbd), "request %p: got reply\n", cmd);
 	if (rq_data_dir(req) != WRITE) {
 		struct req_iterator iter;
 		struct bio_vec bvec;
@@ -419,13 +395,13 @@
 				dev_err(disk_to_dev(nbd->disk), "Receive data failed (result %d)\n",
 					result);
 				req->errors++;
-				return req;
+				return cmd;
 			}
 			dev_dbg(nbd_to_dev(nbd), "request %p: got %d bytes data\n",
-				req, bvec.bv_len);
+				cmd, bvec.bv_len);
 		}
 	}
-	return req;
+	return cmd;
 }
 
 static ssize_t pid_show(struct device *dev,
@@ -444,7 +420,7 @@
 
 static int nbd_thread_recv(struct nbd_device *nbd, struct block_device *bdev)
 {
-	struct request *req;
+	struct nbd_cmd *cmd;
 	int ret;
 
 	BUG_ON(nbd->magic != NBD_MAGIC);
@@ -460,13 +436,13 @@
 	nbd_size_update(nbd, bdev);
 
 	while (1) {
-		req = nbd_read_stat(nbd);
-		if (IS_ERR(req)) {
-			ret = PTR_ERR(req);
+		cmd = nbd_read_stat(nbd);
+		if (IS_ERR(cmd)) {
+			ret = PTR_ERR(cmd);
 			break;
 		}
 
-		nbd_end_request(nbd, req);
+		nbd_end_request(cmd);
 	}
 
 	nbd_size_clear(nbd, bdev);
@@ -475,44 +451,37 @@
 	return ret;
 }
 
+static void nbd_clear_req(struct request *req, void *data, bool reserved)
+{
+	struct nbd_cmd *cmd;
+
+	if (!blk_mq_request_started(req))
+		return;
+	cmd = blk_mq_rq_to_pdu(req);
+	req->errors++;
+	nbd_end_request(cmd);
+}
+
 static void nbd_clear_que(struct nbd_device *nbd)
 {
-	struct request *req;
-
 	BUG_ON(nbd->magic != NBD_MAGIC);
 
 	/*
 	 * Because we have set nbd->sock to NULL under the tx_lock, all
-	 * modifications to the list must have completed by now.  For
-	 * the same reason, the active_req must be NULL.
-	 *
-	 * As a consequence, we don't need to take the spin lock while
-	 * purging the list here.
+	 * modifications to the list must have completed by now.
 	 */
 	BUG_ON(nbd->sock);
-	BUG_ON(nbd->active_req);
 
-	while (!list_empty(&nbd->queue_head)) {
-		req = list_entry(nbd->queue_head.next, struct request,
-				 queuelist);
-		list_del_init(&req->queuelist);
-		req->errors++;
-		nbd_end_request(nbd, req);
-	}
-
-	while (!list_empty(&nbd->waiting_queue)) {
-		req = list_entry(nbd->waiting_queue.next, struct request,
-				 queuelist);
-		list_del_init(&req->queuelist);
-		req->errors++;
-		nbd_end_request(nbd, req);
-	}
+	blk_mq_tagset_busy_iter(&nbd->tag_set, nbd_clear_req, NULL);
 	dev_dbg(disk_to_dev(nbd->disk), "queue cleared\n");
 }
 
 
-static void nbd_handle_req(struct nbd_device *nbd, struct request *req)
+static void nbd_handle_cmd(struct nbd_cmd *cmd)
 {
+	struct request *req = blk_mq_rq_from_pdu(cmd);
+	struct nbd_device *nbd = cmd->nbd;
+
 	if (req->cmd_type != REQ_TYPE_FS)
 		goto error_out;
 
@@ -526,6 +495,7 @@
 	req->errors = 0;
 
 	mutex_lock(&nbd->tx_lock);
+	nbd->task_send = current;
 	if (unlikely(!nbd->sock)) {
 		mutex_unlock(&nbd->tx_lock);
 		dev_err(disk_to_dev(nbd->disk),
@@ -533,106 +503,30 @@
 		goto error_out;
 	}
 
-	nbd->active_req = req;
-
-	if (nbd->xmit_timeout && list_empty_careful(&nbd->queue_head))
-		mod_timer(&nbd->timeout_timer, jiffies + nbd->xmit_timeout);
-
-	if (nbd_send_req(nbd, req) != 0) {
+	if (nbd_send_cmd(nbd, cmd) != 0) {
 		dev_err(disk_to_dev(nbd->disk), "Request send failed\n");
 		req->errors++;
-		nbd_end_request(nbd, req);
-	} else {
-		spin_lock(&nbd->queue_lock);
-		list_add_tail(&req->queuelist, &nbd->queue_head);
-		spin_unlock(&nbd->queue_lock);
+		nbd_end_request(cmd);
 	}
 
-	nbd->active_req = NULL;
+	nbd->task_send = NULL;
 	mutex_unlock(&nbd->tx_lock);
-	wake_up_all(&nbd->active_wq);
 
 	return;
 
 error_out:
 	req->errors++;
-	nbd_end_request(nbd, req);
+	nbd_end_request(cmd);
 }
 
-static int nbd_thread_send(void *data)
+static int nbd_queue_rq(struct blk_mq_hw_ctx *hctx,
+			const struct blk_mq_queue_data *bd)
 {
-	struct nbd_device *nbd = data;
-	struct request *req;
+	struct nbd_cmd *cmd = blk_mq_rq_to_pdu(bd->rq);
 
-	nbd->task_send = current;
-
-	set_user_nice(current, MIN_NICE);
-	while (!kthread_should_stop() || !list_empty(&nbd->waiting_queue)) {
-		/* wait for something to do */
-		wait_event_interruptible(nbd->waiting_wq,
-					 kthread_should_stop() ||
-					 !list_empty(&nbd->waiting_queue));
-
-		/* extract request */
-		if (list_empty(&nbd->waiting_queue))
-			continue;
-
-		spin_lock_irq(&nbd->queue_lock);
-		req = list_entry(nbd->waiting_queue.next, struct request,
-				 queuelist);
-		list_del_init(&req->queuelist);
-		spin_unlock_irq(&nbd->queue_lock);
-
-		/* handle request */
-		nbd_handle_req(nbd, req);
-	}
-
-	nbd->task_send = NULL;
-
-	return 0;
-}
-
-/*
- * We always wait for result of write, for now. It would be nice to make it optional
- * in future
- * if ((rq_data_dir(req) == WRITE) && (nbd->flags & NBD_WRITE_NOCHK))
- *   { printk( "Warning: Ignoring result!\n"); nbd_end_request( req ); }
- */
-
-static void nbd_request_handler(struct request_queue *q)
-		__releases(q->queue_lock) __acquires(q->queue_lock)
-{
-	struct request *req;
-	
-	while ((req = blk_fetch_request(q)) != NULL) {
-		struct nbd_device *nbd;
-
-		spin_unlock_irq(q->queue_lock);
-
-		nbd = req->rq_disk->private_data;
-
-		BUG_ON(nbd->magic != NBD_MAGIC);
-
-		dev_dbg(nbd_to_dev(nbd), "request %p: dequeued (flags=%x)\n",
-			req, req->cmd_type);
-
-		if (unlikely(!nbd->sock)) {
-			dev_err_ratelimited(disk_to_dev(nbd->disk),
-					    "Attempted send on closed socket\n");
-			req->errors++;
-			nbd_end_request(nbd, req);
-			spin_lock_irq(q->queue_lock);
-			continue;
-		}
-
-		spin_lock_irq(&nbd->queue_lock);
-		list_add_tail(&req->queuelist, &nbd->waiting_queue);
-		spin_unlock_irq(&nbd->queue_lock);
-
-		wake_up(&nbd->waiting_wq);
-
-		spin_lock_irq(q->queue_lock);
-	}
+	blk_mq_start_request(bd->rq);
+	nbd_handle_cmd(cmd);
+	return BLK_MQ_RQ_QUEUE_OK;
 }
 
 static int nbd_set_socket(struct nbd_device *nbd, struct socket *sock)
@@ -657,15 +551,13 @@
 /* Reset all properties of an NBD device */
 static void nbd_reset(struct nbd_device *nbd)
 {
-	nbd->disconnect = false;
-	nbd->timedout = false;
+	nbd->runtime_flags = 0;
 	nbd->blksize = 1024;
 	nbd->bytesize = 0;
 	set_capacity(nbd->disk, 0);
 	nbd->flags = 0;
-	nbd->xmit_timeout = 0;
+	nbd->tag_set.timeout = 0;
 	queue_flag_clear_unlocked(QUEUE_FLAG_DISCARD, nbd->disk->queue);
-	del_timer_sync(&nbd->timeout_timer);
 }
 
 static void nbd_bdev_reset(struct block_device *bdev)
@@ -700,33 +592,37 @@
 {
 	switch (cmd) {
 	case NBD_DISCONNECT: {
-		struct request sreq;
+		struct request *sreq;
 
 		dev_info(disk_to_dev(nbd->disk), "NBD_DISCONNECT\n");
 		if (!nbd->sock)
 			return -EINVAL;
 
+		sreq = blk_mq_alloc_request(bdev_get_queue(bdev), WRITE, 0);
+		if (!sreq)
+			return -ENOMEM;
+
 		mutex_unlock(&nbd->tx_lock);
 		fsync_bdev(bdev);
 		mutex_lock(&nbd->tx_lock);
-		blk_rq_init(NULL, &sreq);
-		sreq.cmd_type = REQ_TYPE_DRV_PRIV;
+		sreq->cmd_type = REQ_TYPE_DRV_PRIV;
 
 		/* Check again after getting mutex back.  */
-		if (!nbd->sock)
+		if (!nbd->sock) {
+			blk_mq_free_request(sreq);
 			return -EINVAL;
+		}
 
-		nbd->disconnect = true;
+		set_bit(NBD_DISCONNECT_REQUESTED, &nbd->runtime_flags);
 
-		nbd_send_req(nbd, &sreq);
+		nbd_send_cmd(nbd, blk_mq_rq_to_pdu(sreq));
+		blk_mq_free_request(sreq);
 		return 0;
 	}
  
 	case NBD_CLEAR_SOCK:
 		sock_shutdown(nbd);
 		nbd_clear_que(nbd);
-		BUG_ON(!list_empty(&nbd->queue_head));
-		BUG_ON(!list_empty(&nbd->waiting_queue));
 		kill_bdev(bdev);
 		return 0;
 
@@ -758,13 +654,7 @@
 		return nbd_size_set(nbd, bdev, nbd->blksize, arg);
 
 	case NBD_SET_TIMEOUT:
-		nbd->xmit_timeout = arg * HZ;
-		if (arg)
-			mod_timer(&nbd->timeout_timer,
-				  jiffies + nbd->xmit_timeout);
-		else
-			del_timer_sync(&nbd->timeout_timer);
-
+		nbd->tag_set.timeout = arg * HZ;
 		return 0;
 
 	case NBD_SET_FLAGS:
@@ -772,7 +662,6 @@
 		return 0;
 
 	case NBD_DO_IT: {
-		struct task_struct *thread;
 		int error;
 
 		if (nbd->task_recv)
@@ -786,18 +675,9 @@
 
 		nbd_parse_flags(nbd, bdev);
 
-		thread = kthread_run(nbd_thread_send, nbd, "%s",
-				     nbd_name(nbd));
-		if (IS_ERR(thread)) {
-			mutex_lock(&nbd->tx_lock);
-			nbd->task_recv = NULL;
-			return PTR_ERR(thread);
-		}
-
 		nbd_dev_dbg_init(nbd);
 		error = nbd_thread_recv(nbd, bdev);
 		nbd_dev_dbg_close(nbd);
-		kthread_stop(thread);
 
 		mutex_lock(&nbd->tx_lock);
 		nbd->task_recv = NULL;
@@ -807,9 +687,10 @@
 		kill_bdev(bdev);
 		nbd_bdev_reset(bdev);
 
-		if (nbd->disconnect) /* user requested, ignore socket errors */
+		/* user requested, ignore socket errors */
+		if (test_bit(NBD_DISCONNECT_REQUESTED, &nbd->runtime_flags))
 			error = 0;
-		if (nbd->timedout)
+		if (test_bit(NBD_TIMEDOUT, &nbd->runtime_flags))
 			error = -ETIMEDOUT;
 
 		nbd_reset(nbd);
@@ -825,10 +706,10 @@
 		return 0;
 
 	case NBD_PRINT_DEBUG:
-		dev_info(disk_to_dev(nbd->disk),
-			"next = %p, prev = %p, head = %p\n",
-			nbd->queue_head.next, nbd->queue_head.prev,
-			&nbd->queue_head);
+		/*
+		 * For compatibility only, we no longer keep a list of
+		 * outstanding requests.
+		 */
 		return 0;
 	}
 	return -ENOTTY;
@@ -935,7 +816,7 @@
 
 	debugfs_create_file("tasks", 0444, dir, nbd, &nbd_dbg_tasks_ops);
 	debugfs_create_u64("size_bytes", 0444, dir, &nbd->bytesize);
-	debugfs_create_u32("timeout", 0444, dir, &nbd->xmit_timeout);
+	debugfs_create_u32("timeout", 0444, dir, &nbd->tag_set.timeout);
 	debugfs_create_u32("blocksize", 0444, dir, &nbd->blksize);
 	debugfs_create_file("flags", 0444, dir, nbd, &nbd_dbg_flags_ops);
 
@@ -987,6 +868,24 @@
 
 #endif
 
+static int nbd_init_request(void *data, struct request *rq,
+			    unsigned int hctx_idx, unsigned int request_idx,
+			    unsigned int numa_node)
+{
+	struct nbd_cmd *cmd = blk_mq_rq_to_pdu(rq);
+
+	cmd->nbd = data;
+	INIT_LIST_HEAD(&cmd->list);
+	return 0;
+}
+
+static struct blk_mq_ops nbd_mq_ops = {
+	.queue_rq	= nbd_queue_rq,
+	.map_queue	= blk_mq_map_queue,
+	.init_request	= nbd_init_request,
+	.timeout	= nbd_xmit_timeout,
+};
+
 /*
  * And here should be modules and kernel interface 
  *  (Just smiley confuses emacs :-)
@@ -1035,16 +934,34 @@
 		if (!disk)
 			goto out;
 		nbd_dev[i].disk = disk;
+
+		nbd_dev[i].tag_set.ops = &nbd_mq_ops;
+		nbd_dev[i].tag_set.nr_hw_queues = 1;
+		nbd_dev[i].tag_set.queue_depth = 128;
+		nbd_dev[i].tag_set.numa_node = NUMA_NO_NODE;
+		nbd_dev[i].tag_set.cmd_size = sizeof(struct nbd_cmd);
+		nbd_dev[i].tag_set.flags = BLK_MQ_F_SHOULD_MERGE |
+			BLK_MQ_F_SG_MERGE | BLK_MQ_F_BLOCKING;
+		nbd_dev[i].tag_set.driver_data = &nbd_dev[i];
+
+		err = blk_mq_alloc_tag_set(&nbd_dev[i].tag_set);
+		if (err) {
+			put_disk(disk);
+			goto out;
+		}
+
 		/*
 		 * The new linux 2.5 block layer implementation requires
 		 * every gendisk to have its very own request_queue struct.
 		 * These structs are big so we dynamically allocate them.
 		 */
-		disk->queue = blk_init_queue(nbd_request_handler, &nbd_lock);
+		disk->queue = blk_mq_init_queue(&nbd_dev[i].tag_set);
 		if (!disk->queue) {
+			blk_mq_free_tag_set(&nbd_dev[i].tag_set);
 			put_disk(disk);
 			goto out;
 		}
+
 		/*
 		 * Tell the block layer that we are not a rotational device
 		 */
@@ -1069,16 +986,8 @@
 	for (i = 0; i < nbds_max; i++) {
 		struct gendisk *disk = nbd_dev[i].disk;
 		nbd_dev[i].magic = NBD_MAGIC;
-		INIT_LIST_HEAD(&nbd_dev[i].waiting_queue);
-		spin_lock_init(&nbd_dev[i].queue_lock);
 		spin_lock_init(&nbd_dev[i].sock_lock);
-		INIT_LIST_HEAD(&nbd_dev[i].queue_head);
 		mutex_init(&nbd_dev[i].tx_lock);
-		init_timer(&nbd_dev[i].timeout_timer);
-		nbd_dev[i].timeout_timer.function = nbd_xmit_timeout;
-		nbd_dev[i].timeout_timer.data = (unsigned long)&nbd_dev[i];
-		init_waitqueue_head(&nbd_dev[i].active_wq);
-		init_waitqueue_head(&nbd_dev[i].waiting_wq);
 		disk->major = NBD_MAJOR;
 		disk->first_minor = i << part_shift;
 		disk->fops = &nbd_fops;
@@ -1091,6 +1000,7 @@
 	return 0;
 out:
 	while (i--) {
+		blk_mq_free_tag_set(&nbd_dev[i].tag_set);
 		blk_cleanup_queue(nbd_dev[i].disk->queue);
 		put_disk(nbd_dev[i].disk);
 	}
@@ -1110,6 +1020,7 @@
 		if (disk) {
 			del_gendisk(disk);
 			blk_cleanup_queue(disk->queue);
+			blk_mq_free_tag_set(&nbd_dev[i].tag_set);
 			put_disk(disk);
 		}
 	}
diff --git a/drivers/block/null_blk.c b/drivers/block/null_blk.c
index 75a7f88..91e1de8 100644
--- a/drivers/block/null_blk.c
+++ b/drivers/block/null_blk.c
@@ -34,6 +34,7 @@
 	unsigned int index;
 	struct request_queue *q;
 	struct gendisk *disk;
+	struct nvm_dev *ndev;
 	struct blk_mq_tag_set tag_set;
 	struct hrtimer timer;
 	unsigned int queue_depth;
@@ -414,23 +415,6 @@
 	kfree(nullb->queues);
 }
 
-static void null_del_dev(struct nullb *nullb)
-{
-	list_del_init(&nullb->list);
-
-	if (use_lightnvm)
-		nvm_unregister(nullb->disk_name);
-	else
-		del_gendisk(nullb->disk);
-	blk_cleanup_queue(nullb->q);
-	if (queue_mode == NULL_Q_MQ)
-		blk_mq_free_tag_set(&nullb->tag_set);
-	if (!use_lightnvm)
-		put_disk(nullb->disk);
-	cleanup_queues(nullb);
-	kfree(nullb);
-}
-
 #ifdef CONFIG_NVM
 
 static void null_lnvm_end_io(struct request *rq, int error)
@@ -564,10 +548,58 @@
 	/* Simulate nvme protocol restriction */
 	.max_phys_sect		= 64,
 };
+
+static int null_nvm_register(struct nullb *nullb)
+{
+	struct nvm_dev *dev;
+	int rv;
+
+	dev = nvm_alloc_dev(0);
+	if (!dev)
+		return -ENOMEM;
+
+	dev->q = nullb->q;
+	memcpy(dev->name, nullb->disk_name, DISK_NAME_LEN);
+	dev->ops = &null_lnvm_dev_ops;
+
+	rv = nvm_register(dev);
+	if (rv) {
+		kfree(dev);
+		return rv;
+	}
+	nullb->ndev = dev;
+	return 0;
+}
+
+static void null_nvm_unregister(struct nullb *nullb)
+{
+	nvm_unregister(nullb->ndev);
+}
 #else
-static struct nvm_dev_ops null_lnvm_dev_ops;
+static int null_nvm_register(struct nullb *nullb)
+{
+	return -EINVAL;
+}
+static void null_nvm_unregister(struct nullb *nullb) {}
 #endif /* CONFIG_NVM */
 
+static void null_del_dev(struct nullb *nullb)
+{
+	list_del_init(&nullb->list);
+
+	if (use_lightnvm)
+		null_nvm_unregister(nullb);
+	else
+		del_gendisk(nullb->disk);
+	blk_cleanup_queue(nullb->q);
+	if (queue_mode == NULL_Q_MQ)
+		blk_mq_free_tag_set(&nullb->tag_set);
+	if (!use_lightnvm)
+		put_disk(nullb->disk);
+	cleanup_queues(nullb);
+	kfree(nullb);
+}
+
 static int null_open(struct block_device *bdev, fmode_t mode)
 {
 	return 0;
@@ -640,11 +672,32 @@
 	return 0;
 }
 
-static int null_add_dev(void)
+static int null_gendisk_register(struct nullb *nullb)
 {
 	struct gendisk *disk;
-	struct nullb *nullb;
 	sector_t size;
+
+	disk = nullb->disk = alloc_disk_node(1, home_node);
+	if (!disk)
+		return -ENOMEM;
+	size = gb * 1024 * 1024 * 1024ULL;
+	set_capacity(disk, size >> 9);
+
+	disk->flags |= GENHD_FL_EXT_DEVT | GENHD_FL_SUPPRESS_PARTITION_INFO;
+	disk->major		= null_major;
+	disk->first_minor	= nullb->index;
+	disk->fops		= &null_fops;
+	disk->private_data	= nullb;
+	disk->queue		= nullb->q;
+	strncpy(disk->disk_name, nullb->disk_name, DISK_NAME_LEN);
+
+	add_disk(disk);
+	return 0;
+}
+
+static int null_add_dev(void)
+{
+	struct nullb *nullb;
 	int rv;
 
 	nullb = kzalloc_node(sizeof(*nullb), GFP_KERNEL, home_node);
@@ -716,42 +769,19 @@
 
 	sprintf(nullb->disk_name, "nullb%d", nullb->index);
 
-	if (use_lightnvm) {
-		rv = nvm_register(nullb->q, nullb->disk_name,
-							&null_lnvm_dev_ops);
-		if (rv)
-			goto out_cleanup_blk_queue;
-		goto done;
-	}
+	if (use_lightnvm)
+		rv = null_nvm_register(nullb);
+	else
+		rv = null_gendisk_register(nullb);
 
-	disk = nullb->disk = alloc_disk_node(1, home_node);
-	if (!disk) {
-		rv = -ENOMEM;
-		goto out_cleanup_lightnvm;
-	}
-	size = gb * 1024 * 1024 * 1024ULL;
-	set_capacity(disk, size >> 9);
+	if (rv)
+		goto out_cleanup_blk_queue;
 
-	disk->flags |= GENHD_FL_EXT_DEVT | GENHD_FL_SUPPRESS_PARTITION_INFO;
-	disk->major		= null_major;
-	disk->first_minor	= nullb->index;
-	disk->fops		= &null_fops;
-	disk->private_data	= nullb;
-	disk->queue		= nullb->q;
-	strncpy(disk->disk_name, nullb->disk_name, DISK_NAME_LEN);
-
-	add_disk(disk);
-
-done:
 	mutex_lock(&lock);
 	list_add_tail(&nullb->list, &nullb_list);
 	mutex_unlock(&lock);
 
 	return 0;
-
-out_cleanup_lightnvm:
-	if (use_lightnvm)
-		nvm_unregister(nullb->disk_name);
 out_cleanup_blk_queue:
 	blk_cleanup_queue(nullb->q);
 out_cleanup_tags:
diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig
index 3b205e2..7010dca 100644
--- a/drivers/bus/Kconfig
+++ b/drivers/bus/Kconfig
@@ -108,6 +108,14 @@
 	  OCP2SCP and in OMAP5, both USB PHY and SATA PHY is connected via
 	  OCP2SCP.
 
+config QCOM_EBI2
+	bool "Qualcomm External Bus Interface 2 (EBI2)"
+	depends on HAS_IOMEM
+	help
+	  Say y here to enable support for the Qualcomm External Bus
+	  Interface 2, which can be used to connect things like NAND Flash,
+	  SRAM, ethernet adapters, FPGAs and LCD displays.
+
 config SIMPLE_PM_BUS
 	bool "Simple Power-Managed Bus Driver"
 	depends on OF && PM
@@ -132,12 +140,8 @@
 	  with various RSB based devices, such as AXP223, AXP8XX PMICs,
 	  and AC100/AC200 ICs.
 
-# TODO: This uses pm_clk_*() symbols that aren't exported in v4.7 and hence
-# the driver will fail to build as a module. However there are patches to
-# address that queued for v4.8, so this can be turned into a tristate symbol
-# after v4.8-rc1.
 config TEGRA_ACONNECT
-	bool "Tegra ACONNECT Bus Driver"
+	tristate "Tegra ACONNECT Bus Driver"
 	depends on ARCH_TEGRA_210_SOC
 	depends on OF && PM
 	select PM_CLK
diff --git a/drivers/bus/Makefile b/drivers/bus/Makefile
index ac84cc4..c6cfa6b 100644
--- a/drivers/bus/Makefile
+++ b/drivers/bus/Makefile
@@ -15,6 +15,7 @@
 obj-$(CONFIG_OMAP_INTERCONNECT)	+= omap_l3_smx.o omap_l3_noc.o
 
 obj-$(CONFIG_OMAP_OCP2SCP)	+= omap-ocp2scp.o
+obj-$(CONFIG_QCOM_EBI2)		+= qcom-ebi2.o
 obj-$(CONFIG_SUNXI_RSB)		+= sunxi-rsb.o
 obj-$(CONFIG_SIMPLE_PM_BUS)	+= simple-pm-bus.o
 obj-$(CONFIG_TEGRA_ACONNECT)	+= tegra-aconnect.o
diff --git a/drivers/bus/qcom-ebi2.c b/drivers/bus/qcom-ebi2.c
new file mode 100644
index 0000000..a644424
--- /dev/null
+++ b/drivers/bus/qcom-ebi2.c
@@ -0,0 +1,408 @@
+/*
+ * Qualcomm External Bus Interface 2 (EBI2) driver
+ * an older version of the Qualcomm Parallel Interface Controller (QPIC)
+ *
+ * Copyright (C) 2016 Linaro Ltd.
+ *
+ * Author: Linus Walleij <linus.walleij@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ * See the device tree bindings for this block for more details on the
+ * hardware.
+ */
+
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/bitops.h>
+
+/*
+ * CS0, CS1, CS4 and CS5 are two bits wide, CS2 and CS3 are one bit.
+ */
+#define EBI2_CS0_ENABLE_MASK BIT(0)|BIT(1)
+#define EBI2_CS1_ENABLE_MASK BIT(2)|BIT(3)
+#define EBI2_CS2_ENABLE_MASK BIT(4)
+#define EBI2_CS3_ENABLE_MASK BIT(5)
+#define EBI2_CS4_ENABLE_MASK BIT(6)|BIT(7)
+#define EBI2_CS5_ENABLE_MASK BIT(8)|BIT(9)
+#define EBI2_CSN_MASK GENMASK(9, 0)
+
+#define EBI2_XMEM_CFG 0x0000 /* Power management etc */
+
+/*
+ * SLOW CSn CFG
+ *
+ * Bits 31-28: RECOVERY recovery cycles (0 = 1, 1 = 2 etc) this is the time the
+ *             memory continues to drive the data bus after OE is de-asserted.
+ *             Inserted when reading one CS and switching to another CS or read
+ *             followed by write on the same CS. Valid values 0 thru 15.
+ * Bits 27-24: WR_HOLD write hold cycles, these are extra cycles inserted after
+ *             every write minimum 1. The data out is driven from the time WE is
+ *             asserted until CS is asserted. With a hold of 1, the CS stays
+ *             active for 1 extra cycle etc. Valid values 0 thru 15.
+ * Bits 23-16: WR_DELTA initial latency for write cycles inserted for the first
+ *             write to a page or burst memory
+ * Bits 15-8:  RD_DELTA initial latency for read cycles inserted for the first
+ *             read to a page or burst memory
+ * Bits 7-4:   WR_WAIT number of wait cycles for every write access, 0=1 cycle
+ *             so 1 thru 16 cycles.
+ * Bits 3-0:   RD_WAIT number of wait cycles for every read access, 0=1 cycle
+ *             so 1 thru 16 cycles.
+ */
+#define EBI2_XMEM_CS0_SLOW_CFG 0x0008
+#define EBI2_XMEM_CS1_SLOW_CFG 0x000C
+#define EBI2_XMEM_CS2_SLOW_CFG 0x0010
+#define EBI2_XMEM_CS3_SLOW_CFG 0x0014
+#define EBI2_XMEM_CS4_SLOW_CFG 0x0018
+#define EBI2_XMEM_CS5_SLOW_CFG 0x001C
+
+#define EBI2_XMEM_RECOVERY_SHIFT	28
+#define EBI2_XMEM_WR_HOLD_SHIFT		24
+#define EBI2_XMEM_WR_DELTA_SHIFT	16
+#define EBI2_XMEM_RD_DELTA_SHIFT	8
+#define EBI2_XMEM_WR_WAIT_SHIFT		4
+#define EBI2_XMEM_RD_WAIT_SHIFT		0
+
+/*
+ * FAST CSn CFG
+ * Bits 31-28: ?
+ * Bits 27-24: RD_HOLD: the length in cycles of the first segment of a read
+ *             transfer. For a single read trandfer this will be the time
+ *             from CS assertion to OE assertion.
+ * Bits 18-24: ?
+ * Bits 17-16: ADV_OE_RECOVERY, the number of cycles elapsed before an OE
+ *             assertion, with respect to the cycle where ADV is asserted.
+ *             2 means 2 cycles between ADV and OE. Values 0, 1, 2 or 3.
+ * Bits 5:     ADDR_HOLD_ENA, The address is held for an extra cycle to meet
+ *             hold time requirements with ADV assertion.
+ *
+ * The manual mentions "write precharge cycles" and "precharge cycles".
+ * We have not been able to figure out which bit fields these correspond to
+ * in the hardware, or what valid values exist. The current hypothesis is that
+ * this is something just used on the FAST chip selects. There is also a "byte
+ * device enable" flag somewhere for 8bit memories.
+ */
+#define EBI2_XMEM_CS0_FAST_CFG 0x0028
+#define EBI2_XMEM_CS1_FAST_CFG 0x002C
+#define EBI2_XMEM_CS2_FAST_CFG 0x0030
+#define EBI2_XMEM_CS3_FAST_CFG 0x0034
+#define EBI2_XMEM_CS4_FAST_CFG 0x0038
+#define EBI2_XMEM_CS5_FAST_CFG 0x003C
+
+#define EBI2_XMEM_RD_HOLD_SHIFT		24
+#define EBI2_XMEM_ADV_OE_RECOVERY_SHIFT	16
+#define EBI2_XMEM_ADDR_HOLD_ENA_SHIFT	5
+
+/**
+ * struct cs_data - struct with info on a chipselect setting
+ * @enable_mask: mask to enable the chipselect in the EBI2 config
+ * @slow_cfg0: offset to XMEMC slow CS config
+ * @fast_cfg1: offset to XMEMC fast CS config
+ */
+struct cs_data {
+	u32 enable_mask;
+	u16 slow_cfg;
+	u16 fast_cfg;
+};
+
+static const struct cs_data cs_info[] = {
+	{
+		/* CS0 */
+		.enable_mask = EBI2_CS0_ENABLE_MASK,
+		.slow_cfg = EBI2_XMEM_CS0_SLOW_CFG,
+		.fast_cfg = EBI2_XMEM_CS0_FAST_CFG,
+	},
+	{
+		/* CS1 */
+		.enable_mask = EBI2_CS1_ENABLE_MASK,
+		.slow_cfg = EBI2_XMEM_CS1_SLOW_CFG,
+		.fast_cfg = EBI2_XMEM_CS1_FAST_CFG,
+	},
+	{
+		/* CS2 */
+		.enable_mask = EBI2_CS2_ENABLE_MASK,
+		.slow_cfg = EBI2_XMEM_CS2_SLOW_CFG,
+		.fast_cfg = EBI2_XMEM_CS2_FAST_CFG,
+	},
+	{
+		/* CS3 */
+		.enable_mask = EBI2_CS3_ENABLE_MASK,
+		.slow_cfg = EBI2_XMEM_CS3_SLOW_CFG,
+		.fast_cfg = EBI2_XMEM_CS3_FAST_CFG,
+	},
+	{
+		/* CS4 */
+		.enable_mask = EBI2_CS4_ENABLE_MASK,
+		.slow_cfg = EBI2_XMEM_CS4_SLOW_CFG,
+		.fast_cfg = EBI2_XMEM_CS4_FAST_CFG,
+	},
+	{
+		/* CS5 */
+		.enable_mask = EBI2_CS5_ENABLE_MASK,
+		.slow_cfg = EBI2_XMEM_CS5_SLOW_CFG,
+		.fast_cfg = EBI2_XMEM_CS5_FAST_CFG,
+	},
+};
+
+/**
+ * struct ebi2_xmem_prop - describes an XMEM config property
+ * @prop: the device tree binding name
+ * @max: maximum value for the property
+ * @slowreg: true if this property is in the SLOW CS config register
+ * else it is assumed to be in the FAST config register
+ * @shift: the bit field start in the SLOW or FAST register for this
+ * property
+ */
+struct ebi2_xmem_prop {
+	const char *prop;
+	u32 max;
+	bool slowreg;
+	u16 shift;
+};
+
+static const struct ebi2_xmem_prop xmem_props[] = {
+	{
+		.prop = "qcom,xmem-recovery-cycles",
+		.max = 15,
+		.slowreg = true,
+		.shift = EBI2_XMEM_RECOVERY_SHIFT,
+	},
+	{
+		.prop = "qcom,xmem-write-hold-cycles",
+		.max = 15,
+		.slowreg = true,
+		.shift = EBI2_XMEM_WR_HOLD_SHIFT,
+	},
+	{
+		.prop = "qcom,xmem-write-delta-cycles",
+		.max = 255,
+		.slowreg = true,
+		.shift = EBI2_XMEM_WR_DELTA_SHIFT,
+	},
+	{
+		.prop = "qcom,xmem-read-delta-cycles",
+		.max = 255,
+		.slowreg = true,
+		.shift = EBI2_XMEM_RD_DELTA_SHIFT,
+	},
+	{
+		.prop = "qcom,xmem-write-wait-cycles",
+		.max = 15,
+		.slowreg = true,
+		.shift = EBI2_XMEM_WR_WAIT_SHIFT,
+	},
+	{
+		.prop = "qcom,xmem-read-wait-cycles",
+		.max = 15,
+		.slowreg = true,
+		.shift = EBI2_XMEM_RD_WAIT_SHIFT,
+	},
+	{
+		.prop = "qcom,xmem-address-hold-enable",
+		.max = 1, /* boolean prop */
+		.slowreg = false,
+		.shift = EBI2_XMEM_ADDR_HOLD_ENA_SHIFT,
+	},
+	{
+		.prop = "qcom,xmem-adv-to-oe-recovery-cycles",
+		.max = 3,
+		.slowreg = false,
+		.shift = EBI2_XMEM_ADV_OE_RECOVERY_SHIFT,
+	},
+	{
+		.prop = "qcom,xmem-read-hold-cycles",
+		.max = 15,
+		.slowreg = false,
+		.shift = EBI2_XMEM_RD_HOLD_SHIFT,
+	},
+};
+
+static void qcom_ebi2_setup_chipselect(struct device_node *np,
+				       struct device *dev,
+				       void __iomem *ebi2_base,
+				       void __iomem *ebi2_xmem,
+				       u32 csindex)
+{
+	const struct cs_data *csd;
+	u32 slowcfg, fastcfg;
+	u32 val;
+	int ret;
+	int i;
+
+	csd = &cs_info[csindex];
+	val = readl(ebi2_base);
+	val |= csd->enable_mask;
+	writel(val, ebi2_base);
+	dev_dbg(dev, "enabled CS%u\n", csindex);
+
+	/* Next set up the XMEMC */
+	slowcfg = 0;
+	fastcfg = 0;
+
+	for (i = 0; i < ARRAY_SIZE(xmem_props); i++) {
+		const struct ebi2_xmem_prop *xp = &xmem_props[i];
+
+		/* All are regular u32 values */
+		ret = of_property_read_u32(np, xp->prop, &val);
+		if (ret) {
+			dev_dbg(dev, "could not read %s for CS%d\n",
+				xp->prop, csindex);
+			continue;
+		}
+
+		/* First check boolean props */
+		if (xp->max == 1 && val) {
+			if (xp->slowreg)
+				slowcfg |= BIT(xp->shift);
+			else
+				fastcfg |= BIT(xp->shift);
+			dev_dbg(dev, "set %s flag\n", xp->prop);
+			continue;
+		}
+
+		/* We're dealing with an u32 */
+		if (val > xp->max) {
+			dev_err(dev,
+				"too high value for %s: %u, capped at %u\n",
+				xp->prop, val, xp->max);
+			val = xp->max;
+		}
+		if (xp->slowreg)
+			slowcfg |= (val << xp->shift);
+		else
+			fastcfg |= (val << xp->shift);
+		dev_dbg(dev, "set %s to %u\n", xp->prop, val);
+	}
+
+	dev_info(dev, "CS%u: SLOW CFG 0x%08x, FAST CFG 0x%08x\n",
+		 csindex, slowcfg, fastcfg);
+
+	if (slowcfg)
+		writel(slowcfg, ebi2_xmem + csd->slow_cfg);
+	if (fastcfg)
+		writel(fastcfg, ebi2_xmem + csd->fast_cfg);
+}
+
+static int qcom_ebi2_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct device_node *child;
+	struct device *dev = &pdev->dev;
+	struct resource *res;
+	void __iomem *ebi2_base;
+	void __iomem *ebi2_xmem;
+	struct clk *ebi2xclk;
+	struct clk *ebi2clk;
+	bool have_children = false;
+	u32 val;
+	int ret;
+
+	ebi2xclk = devm_clk_get(dev, "ebi2x");
+	if (IS_ERR(ebi2xclk))
+		return PTR_ERR(ebi2xclk);
+
+	ret = clk_prepare_enable(ebi2xclk);
+	if (ret) {
+		dev_err(dev, "could not enable EBI2X clk (%d)\n", ret);
+		return ret;
+	}
+
+	ebi2clk = devm_clk_get(dev, "ebi2");
+	if (IS_ERR(ebi2clk)) {
+		ret = PTR_ERR(ebi2clk);
+		goto err_disable_2x_clk;
+	}
+
+	ret = clk_prepare_enable(ebi2clk);
+	if (ret) {
+		dev_err(dev, "could not enable EBI2 clk\n");
+		goto err_disable_2x_clk;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	ebi2_base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(ebi2_base)) {
+		ret = PTR_ERR(ebi2_base);
+		goto err_disable_clk;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	ebi2_xmem = devm_ioremap_resource(dev, res);
+	if (IS_ERR(ebi2_xmem)) {
+		ret = PTR_ERR(ebi2_xmem);
+		goto err_disable_clk;
+	}
+
+	/* Allegedly this turns the power save mode off */
+	writel(0UL, ebi2_xmem + EBI2_XMEM_CFG);
+
+	/* Disable all chipselects */
+	val = readl(ebi2_base);
+	val &= ~EBI2_CSN_MASK;
+	writel(val, ebi2_base);
+
+	/* Walk over the child nodes and see what chipselects we use */
+	for_each_available_child_of_node(np, child) {
+		u32 csindex;
+
+		/* Figure out the chipselect */
+		ret = of_property_read_u32(child, "reg", &csindex);
+		if (ret)
+			return ret;
+
+		if (csindex > 5) {
+			dev_err(dev,
+				"invalid chipselect %u, we only support 0-5\n",
+				csindex);
+			continue;
+		}
+
+		qcom_ebi2_setup_chipselect(child,
+					   dev,
+					   ebi2_base,
+					   ebi2_xmem,
+					   csindex);
+
+		/* We have at least one child */
+		have_children = true;
+	}
+
+	if (have_children)
+		return of_platform_default_populate(np, NULL, dev);
+	return 0;
+
+err_disable_clk:
+	clk_disable_unprepare(ebi2clk);
+err_disable_2x_clk:
+	clk_disable_unprepare(ebi2xclk);
+
+	return ret;
+}
+
+static const struct of_device_id qcom_ebi2_of_match[] = {
+	{ .compatible = "qcom,msm8660-ebi2", },
+	{ .compatible = "qcom,apq8060-ebi2", },
+	{ }
+};
+
+static struct platform_driver qcom_ebi2_driver = {
+	.probe = qcom_ebi2_probe,
+	.driver = {
+		.name = "qcom-ebi2",
+		.of_match_table = qcom_ebi2_of_match,
+	},
+};
+module_platform_driver(qcom_ebi2_driver);
+MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>");
+MODULE_DESCRIPTION("Qualcomm EBI2 driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/bus/tegra-aconnect.c b/drivers/bus/tegra-aconnect.c
index 7e4104b..084ae28 100644
--- a/drivers/bus/tegra-aconnect.c
+++ b/drivers/bus/tegra-aconnect.c
@@ -15,24 +15,6 @@
 #include <linux/pm_clock.h>
 #include <linux/pm_runtime.h>
 
-static int tegra_aconnect_add_clock(struct device *dev, char *name)
-{
-	struct clk *clk;
-	int ret;
-
-	clk = clk_get(dev, name);
-	if (IS_ERR(clk)) {
-		dev_err(dev, "%s clock not found\n", name);
-		return PTR_ERR(clk);
-	}
-
-	ret = pm_clk_add_clk(dev, clk);
-	if (ret)
-		clk_put(clk);
-
-	return ret;
-}
-
 static int tegra_aconnect_probe(struct platform_device *pdev)
 {
 	int ret;
@@ -44,11 +26,11 @@
 	if (ret)
 		return ret;
 
-	ret = tegra_aconnect_add_clock(&pdev->dev, "ape");
+	ret = of_pm_clk_add_clk(&pdev->dev, "ape");
 	if (ret)
 		goto clk_destroy;
 
-	ret = tegra_aconnect_add_clock(&pdev->dev, "apb2ape");
+	ret = of_pm_clk_add_clk(&pdev->dev, "apb2ape");
 	if (ret)
 		goto clk_destroy;
 
diff --git a/drivers/char/hw_random/pasemi-rng.c b/drivers/char/hw_random/pasemi-rng.c
index 699b725..c19e23d 100644
--- a/drivers/char/hw_random/pasemi-rng.c
+++ b/drivers/char/hw_random/pasemi-rng.c
@@ -26,7 +26,7 @@
 #include <linux/delay.h>
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
-#include <asm/io.h>
+#include <linux/io.h>
 
 #define SDCRNG_CTL_REG			0x00
 #define   SDCRNG_CTL_FVLD_M		0x0000f000
diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c
index 5da47e26..8114744 100644
--- a/drivers/char/virtio_console.c
+++ b/drivers/char/virtio_console.c
@@ -889,7 +889,7 @@
 		return 0;
 
 	/* Try lock this page */
-	if (buf->ops->steal(pipe, buf) == 0) {
+	if (pipe_buf_steal(pipe, buf) == 0) {
 		/* Get reference and unlock page for moving */
 		get_page(buf->page);
 		unlock_page(buf->page);
diff --git a/drivers/clk/imx/clk-imx1.c b/drivers/clk/imx/clk-imx1.c
index 99cf802..eaa462a 100644
--- a/drivers/clk/imx/clk-imx1.c
+++ b/drivers/clk/imx/clk-imx1.c
@@ -45,10 +45,13 @@
 #define CCM_PCDR	(ccm + 0x0020)
 #define SCM_GCCR	(ccm + 0x0810)
 
-static void __init _mx1_clocks_init(unsigned long fref)
+static void __init mx1_clocks_init_dt(struct device_node *np)
 {
+	ccm = of_iomap(np, 0);
+	BUG_ON(!ccm);
+
 	clk[IMX1_CLK_DUMMY] = imx_clk_fixed("dummy", 0);
-	clk[IMX1_CLK_CLK32] = imx_obtain_fixed_clock("clk32", fref);
+	clk[IMX1_CLK_CLK32] = imx_obtain_fixed_clock("clk32", 32768);
 	clk[IMX1_CLK_CLK16M_EXT] = imx_clk_fixed("clk16m_ext", 16000000);
 	clk[IMX1_CLK_CLK16M] = imx_clk_gate("clk16m", "clk16m_ext", CCM_CSCR, 17);
 	clk[IMX1_CLK_CLK32_PREMULT] = imx_clk_fixed_factor("clk32_premult", "clk32", 512, 1);
@@ -74,45 +77,6 @@
 	clk[IMX1_CLK_USBD_GATE] = imx_clk_gate("usbd_gate", "clk48m", SCM_GCCR, 0);
 
 	imx_check_clocks(clk, ARRAY_SIZE(clk));
-}
-
-int __init mx1_clocks_init(unsigned long fref)
-{
-	ccm = ioremap(MX1_CCM_BASE_ADDR, SZ_4K);
-	BUG_ON(!ccm);
-
-	_mx1_clocks_init(fref);
-
-	clk_register_clkdev(clk[IMX1_CLK_PER1], "per", "imx-gpt.0");
-	clk_register_clkdev(clk[IMX1_CLK_HCLK], "ipg", "imx-gpt.0");
-	clk_register_clkdev(clk[IMX1_CLK_DMA_GATE], "ahb", "imx1-dma");
-	clk_register_clkdev(clk[IMX1_CLK_HCLK], "ipg", "imx1-dma");
-	clk_register_clkdev(clk[IMX1_CLK_PER1], "per", "imx1-uart.0");
-	clk_register_clkdev(clk[IMX1_CLK_HCLK], "ipg", "imx1-uart.0");
-	clk_register_clkdev(clk[IMX1_CLK_PER1], "per", "imx1-uart.1");
-	clk_register_clkdev(clk[IMX1_CLK_HCLK], "ipg", "imx1-uart.1");
-	clk_register_clkdev(clk[IMX1_CLK_PER1], "per", "imx1-uart.2");
-	clk_register_clkdev(clk[IMX1_CLK_UART3_GATE], "ipg", "imx1-uart.2");
-	clk_register_clkdev(clk[IMX1_CLK_HCLK], NULL, "imx1-i2c.0");
-	clk_register_clkdev(clk[IMX1_CLK_PER2], "per", "imx1-cspi.0");
-	clk_register_clkdev(clk[IMX1_CLK_DUMMY], "ipg", "imx1-cspi.0");
-	clk_register_clkdev(clk[IMX1_CLK_PER2], "per", "imx1-cspi.1");
-	clk_register_clkdev(clk[IMX1_CLK_DUMMY], "ipg", "imx1-cspi.1");
-	clk_register_clkdev(clk[IMX1_CLK_PER2], "per", "imx1-fb.0");
-	clk_register_clkdev(clk[IMX1_CLK_DUMMY], "ipg", "imx1-fb.0");
-	clk_register_clkdev(clk[IMX1_CLK_DUMMY], "ahb", "imx1-fb.0");
-
-	mxc_timer_init(MX1_TIM1_BASE_ADDR, MX1_TIM1_INT, GPT_TYPE_IMX1);
-
-	return 0;
-}
-
-static void __init mx1_clocks_init_dt(struct device_node *np)
-{
-	ccm = of_iomap(np, 0);
-	BUG_ON(!ccm);
-
-	_mx1_clocks_init(32768);
 
 	clk_data.clks = clk;
 	clk_data.clk_num = ARRAY_SIZE(clk);
diff --git a/drivers/clk/meson/gxbb.h b/drivers/clk/meson/gxbb.h
index ae461b1..0252939 100644
--- a/drivers/clk/meson/gxbb.h
+++ b/drivers/clk/meson/gxbb.h
@@ -183,14 +183,14 @@
 /* CLKID_CLK81 */
 #define CLKID_MPLL0		  13
 #define CLKID_MPLL1		  14
-#define CLKID_MPLL2		  15
+/* CLKID_MPLL2 */
 #define CLKID_DDR		  16
 #define CLKID_DOS		  17
 #define CLKID_ISA		  18
 #define CLKID_PL301		  19
 #define CLKID_PERIPHS		  20
 #define CLKID_SPICC		  21
-#define CLKID_I2C		  22
+/* CLKID_I2C */
 #define CLKID_SAR_ADC		  23
 #define CLKID_SMART_CARD	  24
 #define CLKID_RNG0		  25
@@ -202,7 +202,7 @@
 #define CLKID_ABUF		  31
 #define CLKID_HIU_IFACE		  32
 #define CLKID_ASSIST_MISC	  33
-#define CLKID_SPI		  34
+/* CLKID_SPI */
 #define CLKID_I2S_SPDIF		  35
 #define CLKID_ETH		  36
 #define CLKID_DEMUX		  37
@@ -218,12 +218,12 @@
 #define CLKID_AIU		  47
 #define CLKID_UART1		  48
 #define CLKID_G2D		  49
-#define CLKID_USB0		  50
-#define CLKID_USB1		  51
+/* CLKID_USB0 */
+/* CLKID_USB1 */
 #define CLKID_RESET		  52
 #define CLKID_NAND		  53
 #define CLKID_DOS_PARSER	  54
-#define CLKID_USB		  55
+/* CLKID_USB */
 #define CLKID_VDIN1		  56
 #define CLKID_AHB_ARB0		  57
 #define CLKID_EFUSE		  58
@@ -232,8 +232,8 @@
 #define CLKID_AHB_CTRL_BUS	  61
 #define CLKID_HDMI_INTR_SYNC	  62
 #define CLKID_HDMI_PCLK		  63
-#define CLKID_USB1_DDR_BRIDGE	  64
-#define CLKID_USB0_DDR_BRIDGE	  65
+/* CLKID_USB1_DDR_BRIDGE */
+/* CLKID_USB0_DDR_BRIDGE */
 #define CLKID_MMC_PCLK		  66
 #define CLKID_DVIN		  67
 #define CLKID_UART2		  68
@@ -261,7 +261,7 @@
 #define CLKID_AO_AHB_SRAM	  90
 #define CLKID_AO_AHB_BUS	  91
 #define CLKID_AO_IFACE		  92
-#define CLKID_AO_I2C		  93
+/* CLKID_AO_I2C */
 /* CLKID_SD_EMMC_A */
 /* CLKID_SD_EMMC_B */
 /* CLKID_SD_EMMC_C */
diff --git a/drivers/clk/mvebu/orion.c b/drivers/clk/mvebu/orion.c
index fd12956..a6e5bee 100644
--- a/drivers/clk/mvebu/orion.c
+++ b/drivers/clk/mvebu/orion.c
@@ -21,6 +21,76 @@
 };
 
 /*
+ * Orion 5181
+ */
+
+#define SAR_MV88F5181_TCLK_FREQ      8
+#define SAR_MV88F5181_TCLK_FREQ_MASK 0x3
+
+static u32 __init mv88f5181_get_tclk_freq(void __iomem *sar)
+{
+	u32 opt = (readl(sar) >> SAR_MV88F5181_TCLK_FREQ) &
+		SAR_MV88F5181_TCLK_FREQ_MASK;
+	if (opt == 0)
+		return 133333333;
+	else if (opt == 1)
+		return 150000000;
+	else if (opt == 2)
+		return 166666667;
+	else
+		return 0;
+}
+
+#define SAR_MV88F5181_CPU_FREQ       4
+#define SAR_MV88F5181_CPU_FREQ_MASK  0xf
+
+static u32 __init mv88f5181_get_cpu_freq(void __iomem *sar)
+{
+	u32 opt = (readl(sar) >> SAR_MV88F5181_CPU_FREQ) &
+		SAR_MV88F5181_CPU_FREQ_MASK;
+	if (opt == 0)
+		return 333333333;
+	else if (opt == 1 || opt == 2)
+		return 400000000;
+	else if (opt == 3)
+		return 500000000;
+	else
+		return 0;
+}
+
+static void __init mv88f5181_get_clk_ratio(void __iomem *sar, int id,
+					   int *mult, int *div)
+{
+	u32 opt = (readl(sar) >> SAR_MV88F5181_CPU_FREQ) &
+		SAR_MV88F5181_CPU_FREQ_MASK;
+	if (opt == 0 || opt == 1) {
+		*mult = 1;
+		*div  = 2;
+	} else if (opt == 2 || opt == 3) {
+		*mult = 1;
+		*div  = 3;
+	} else {
+		*mult = 0;
+		*div  = 1;
+	}
+}
+
+static const struct coreclk_soc_desc mv88f5181_coreclks = {
+	.get_tclk_freq = mv88f5181_get_tclk_freq,
+	.get_cpu_freq = mv88f5181_get_cpu_freq,
+	.get_clk_ratio = mv88f5181_get_clk_ratio,
+	.ratios = orion_coreclk_ratios,
+	.num_ratios = ARRAY_SIZE(orion_coreclk_ratios),
+};
+
+static void __init mv88f5181_clk_init(struct device_node *np)
+{
+	return mvebu_coreclk_setup(np, &mv88f5181_coreclks);
+}
+
+CLK_OF_DECLARE(mv88f5181_clk, "marvell,mv88f5181-core-clock", mv88f5181_clk_init);
+
+/*
  * Orion 5182
  */
 
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 8a753fd..2451908 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -361,7 +361,7 @@
 
 config CLKSRC_EXYNOS_MCT
 	bool "Exynos multi core timer driver" if COMPILE_TEST
-	depends on ARM
+	depends on ARM || ARM64
 	help
 	  Support for Multi Core Timer controller on Exynos SoCs.
 
diff --git a/drivers/clocksource/exynos_mct.c b/drivers/clocksource/exynos_mct.c
index 41840d0..8f3488b 100644
--- a/drivers/clocksource/exynos_mct.c
+++ b/drivers/clocksource/exynos_mct.c
@@ -223,6 +223,7 @@
 	return exynos4_read_count_32();
 }
 
+#if defined(CONFIG_ARM)
 static struct delay_timer exynos4_delay_timer;
 
 static cycles_t exynos4_read_current_timer(void)
@@ -231,14 +232,17 @@
 			 "cycles_t needs to move to 32-bit for ARM64 usage");
 	return exynos4_read_count_32();
 }
+#endif
 
 static int __init exynos4_clocksource_init(void)
 {
 	exynos4_mct_frc_start();
 
+#if defined(CONFIG_ARM)
 	exynos4_delay_timer.read_current_timer = &exynos4_read_current_timer;
 	exynos4_delay_timer.freq = clk_rate;
 	register_current_timer_delay(&exynos4_delay_timer);
+#endif
 
 	if (clocksource_register_hz(&mct_frc, clk_rate))
 		panic("%s: can't register clocksource\n", mct_frc.name);
diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
index 0e22f24..bca172d 100644
--- a/drivers/firmware/Kconfig
+++ b/drivers/firmware/Kconfig
@@ -209,5 +209,6 @@
 source "drivers/firmware/broadcom/Kconfig"
 source "drivers/firmware/google/Kconfig"
 source "drivers/firmware/efi/Kconfig"
+source "drivers/firmware/meson/Kconfig"
 
 endmenu
diff --git a/drivers/firmware/Makefile b/drivers/firmware/Makefile
index 44a59dc..898ac41 100644
--- a/drivers/firmware/Makefile
+++ b/drivers/firmware/Makefile
@@ -22,6 +22,7 @@
 CFLAGS_qcom_scm-32.o :=$(call as-instr,.arch armv7-a\n.arch_extension sec,-DREQUIRES_SEC=1) -march=armv7-a
 
 obj-y				+= broadcom/
+obj-y				+= meson/
 obj-$(CONFIG_GOOGLE_FIRMWARE)	+= google/
 obj-$(CONFIG_EFI)		+= efi/
 obj-$(CONFIG_UEFI_CPER)		+= efi/
diff --git a/drivers/firmware/meson/Kconfig b/drivers/firmware/meson/Kconfig
new file mode 100644
index 0000000..170d7e8
--- /dev/null
+++ b/drivers/firmware/meson/Kconfig
@@ -0,0 +1,9 @@
+#
+# Amlogic Secure Monitor driver
+#
+config MESON_SM
+	bool
+	default ARCH_MESON
+	depends on ARM64_4K_PAGES
+	help
+	  Say y here to enable the Amlogic secure monitor driver
diff --git a/drivers/firmware/meson/Makefile b/drivers/firmware/meson/Makefile
new file mode 100644
index 0000000..9ab3884
--- /dev/null
+++ b/drivers/firmware/meson/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_MESON_SM) +=	meson_sm.o
diff --git a/drivers/firmware/meson/meson_sm.c b/drivers/firmware/meson/meson_sm.c
new file mode 100644
index 0000000..b0d2549
--- /dev/null
+++ b/drivers/firmware/meson/meson_sm.c
@@ -0,0 +1,248 @@
+/*
+ * Amlogic Secure Monitor driver
+ *
+ * Copyright (C) 2016 Endless Mobile, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#define pr_fmt(fmt) "meson-sm: " fmt
+
+#include <linux/arm-smccc.h>
+#include <linux/bug.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/printk.h>
+#include <linux/types.h>
+#include <linux/sizes.h>
+
+#include <linux/firmware/meson/meson_sm.h>
+
+struct meson_sm_cmd {
+	unsigned int index;
+	u32 smc_id;
+};
+#define CMD(d, s) { .index = (d), .smc_id = (s), }
+
+struct meson_sm_chip {
+	unsigned int shmem_size;
+	u32 cmd_shmem_in_base;
+	u32 cmd_shmem_out_base;
+	struct meson_sm_cmd cmd[];
+};
+
+struct meson_sm_chip gxbb_chip = {
+	.shmem_size		= SZ_4K,
+	.cmd_shmem_in_base	= 0x82000020,
+	.cmd_shmem_out_base	= 0x82000021,
+	.cmd = {
+		CMD(SM_EFUSE_READ,	0x82000030),
+		CMD(SM_EFUSE_WRITE,	0x82000031),
+		CMD(SM_EFUSE_USER_MAX,	0x82000033),
+		{ /* sentinel */ },
+	},
+};
+
+struct meson_sm_firmware {
+	const struct meson_sm_chip *chip;
+	void __iomem *sm_shmem_in_base;
+	void __iomem *sm_shmem_out_base;
+};
+
+static struct meson_sm_firmware fw;
+
+static u32 meson_sm_get_cmd(const struct meson_sm_chip *chip,
+			    unsigned int cmd_index)
+{
+	const struct meson_sm_cmd *cmd = chip->cmd;
+
+	while (cmd->smc_id && cmd->index != cmd_index)
+		cmd++;
+
+	return cmd->smc_id;
+}
+
+static u32 __meson_sm_call(u32 cmd, u32 arg0, u32 arg1, u32 arg2,
+			   u32 arg3, u32 arg4)
+{
+	struct arm_smccc_res res;
+
+	arm_smccc_smc(cmd, arg0, arg1, arg2, arg3, arg4, 0, 0, &res);
+	return res.a0;
+}
+
+static void __iomem *meson_sm_map_shmem(u32 cmd_shmem, unsigned int size)
+{
+	u32 sm_phy_base;
+
+	sm_phy_base = __meson_sm_call(cmd_shmem, 0, 0, 0, 0, 0);
+	if (!sm_phy_base)
+		return 0;
+
+	return ioremap_cache(sm_phy_base, size);
+}
+
+/**
+ * meson_sm_call - generic SMC32 call to the secure-monitor
+ *
+ * @cmd_index:	Index of the SMC32 function ID
+ * @ret:	Returned value
+ * @arg0:	SMC32 Argument 0
+ * @arg1:	SMC32 Argument 1
+ * @arg2:	SMC32 Argument 2
+ * @arg3:	SMC32 Argument 3
+ * @arg4:	SMC32 Argument 4
+ *
+ * Return:	0 on success, a negative value on error
+ */
+int meson_sm_call(unsigned int cmd_index, u32 *ret, u32 arg0,
+		  u32 arg1, u32 arg2, u32 arg3, u32 arg4)
+{
+	u32 cmd, lret;
+
+	if (!fw.chip)
+		return -ENOENT;
+
+	cmd = meson_sm_get_cmd(fw.chip, cmd_index);
+	if (!cmd)
+		return -EINVAL;
+
+	lret = __meson_sm_call(cmd, arg0, arg1, arg2, arg3, arg4);
+
+	if (ret)
+		*ret = lret;
+
+	return 0;
+}
+EXPORT_SYMBOL(meson_sm_call);
+
+/**
+ * meson_sm_call_read - retrieve data from secure-monitor
+ *
+ * @buffer:	Buffer to store the retrieved data
+ * @cmd_index:	Index of the SMC32 function ID
+ * @arg0:	SMC32 Argument 0
+ * @arg1:	SMC32 Argument 1
+ * @arg2:	SMC32 Argument 2
+ * @arg3:	SMC32 Argument 3
+ * @arg4:	SMC32 Argument 4
+ *
+ * Return:	size of read data on success, a negative value on error
+ */
+int meson_sm_call_read(void *buffer, unsigned int cmd_index, u32 arg0,
+		       u32 arg1, u32 arg2, u32 arg3, u32 arg4)
+{
+	u32 size;
+
+	if (!fw.chip)
+		return -ENOENT;
+
+	if (!fw.chip->cmd_shmem_out_base)
+		return -EINVAL;
+
+	if (meson_sm_call(cmd_index, &size, arg0, arg1, arg2, arg3, arg4) < 0)
+		return -EINVAL;
+
+	if (!size || size > fw.chip->shmem_size)
+		return -EINVAL;
+
+	if (buffer)
+		memcpy(buffer, fw.sm_shmem_out_base, size);
+
+	return size;
+}
+EXPORT_SYMBOL(meson_sm_call_read);
+
+/**
+ * meson_sm_call_write - send data to secure-monitor
+ *
+ * @buffer:	Buffer containing data to send
+ * @size:	Size of the data to send
+ * @cmd_index:	Index of the SMC32 function ID
+ * @arg0:	SMC32 Argument 0
+ * @arg1:	SMC32 Argument 1
+ * @arg2:	SMC32 Argument 2
+ * @arg3:	SMC32 Argument 3
+ * @arg4:	SMC32 Argument 4
+ *
+ * Return:	size of sent data on success, a negative value on error
+ */
+int meson_sm_call_write(void *buffer, unsigned int size, unsigned int cmd_index,
+			u32 arg0, u32 arg1, u32 arg2, u32 arg3, u32 arg4)
+{
+	u32 written;
+
+	if (!fw.chip)
+		return -ENOENT;
+
+	if (size > fw.chip->shmem_size)
+		return -EINVAL;
+
+	if (!fw.chip->cmd_shmem_in_base)
+		return -EINVAL;
+
+	memcpy(fw.sm_shmem_in_base, buffer, size);
+
+	if (meson_sm_call(cmd_index, &written, arg0, arg1, arg2, arg3, arg4) < 0)
+		return -EINVAL;
+
+	if (!written)
+		return -EINVAL;
+
+	return written;
+}
+EXPORT_SYMBOL(meson_sm_call_write);
+
+static const struct of_device_id meson_sm_ids[] = {
+	{ .compatible = "amlogic,meson-gxbb-sm", .data = &gxbb_chip },
+	{ /* sentinel */ },
+};
+
+int __init meson_sm_init(void)
+{
+	const struct meson_sm_chip *chip;
+	const struct of_device_id *matched_np;
+	struct device_node *np;
+
+	np = of_find_matching_node_and_match(NULL, meson_sm_ids, &matched_np);
+	if (!np)
+		return -ENODEV;
+
+	chip = matched_np->data;
+	if (!chip) {
+		pr_err("unable to setup secure-monitor data\n");
+		goto out;
+	}
+
+	if (chip->cmd_shmem_in_base) {
+		fw.sm_shmem_in_base = meson_sm_map_shmem(chip->cmd_shmem_in_base,
+							 chip->shmem_size);
+		if (WARN_ON(!fw.sm_shmem_in_base))
+			goto out;
+	}
+
+	if (chip->cmd_shmem_out_base) {
+		fw.sm_shmem_out_base = meson_sm_map_shmem(chip->cmd_shmem_out_base,
+							  chip->shmem_size);
+		if (WARN_ON(!fw.sm_shmem_out_base))
+			goto out_in_base;
+	}
+
+	fw.chip = chip;
+	pr_info("secure-monitor enabled\n");
+
+	return 0;
+
+out_in_base:
+	iounmap(fw.sm_shmem_in_base);
+out:
+	return -EINVAL;
+}
+device_initcall(meson_sm_init);
diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
index e64a501..d95c702 100644
--- a/drivers/firmware/qcom_scm.c
+++ b/drivers/firmware/qcom_scm.c
@@ -1,4 +1,7 @@
-/* Copyright (c) 2010,2015, The Linux Foundation. All rights reserved.
+/*
+ * Qualcomm SCM driver
+ *
+ * Copyright (c) 2010,2015, The Linux Foundation. All rights reserved.
  * Copyright (C) 2015 Linaro Ltd.
  *
  * This program is free software; you can redistribute it and/or modify
@@ -12,7 +15,7 @@
  *
  */
 #include <linux/platform_device.h>
-#include <linux/module.h>
+#include <linux/init.h>
 #include <linux/cpumask.h>
 #include <linux/export.h>
 #include <linux/dma-mapping.h>
@@ -376,8 +379,6 @@
 	{}
 };
 
-MODULE_DEVICE_TABLE(of, qcom_scm_dt_match);
-
 static struct platform_driver qcom_scm_driver = {
 	.driver = {
 		.name	= "qcom_scm",
@@ -414,14 +415,4 @@
 
 	return platform_driver_register(&qcom_scm_driver);
 }
-
 subsys_initcall(qcom_scm_init);
-
-static void __exit qcom_scm_exit(void)
-{
-	platform_driver_unregister(&qcom_scm_driver);
-}
-module_exit(qcom_scm_exit);
-
-MODULE_DESCRIPTION("Qualcomm SCM driver");
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index b372e79..e4dbfc8 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -25,7 +25,7 @@
 obj-$(CONFIG_ARCH_SPEAR3XX)		+= spear-shirq.o
 obj-$(CONFIG_ARM_GIC)			+= irq-gic.o irq-gic-common.o
 obj-$(CONFIG_ARM_GIC_PM)		+= irq-gic-pm.o
-obj-$(CONFIG_REALVIEW_DT)		+= irq-gic-realview.o
+obj-$(CONFIG_ARCH_REALVIEW)		+= irq-gic-realview.o
 obj-$(CONFIG_ARM_GIC_V2M)		+= irq-gic-v2m.o
 obj-$(CONFIG_ARM_GIC_V3)		+= irq-gic-v3.o irq-gic-common.o
 obj-$(CONFIG_ARM_GIC_V3_ITS)		+= irq-gic-v3-its.o irq-gic-v3-its-pci-msi.o irq-gic-v3-its-platform-msi.o
diff --git a/drivers/lightnvm/Kconfig b/drivers/lightnvm/Kconfig
index 61c68a1..2f5d5f4 100644
--- a/drivers/lightnvm/Kconfig
+++ b/drivers/lightnvm/Kconfig
@@ -4,7 +4,7 @@
 
 menuconfig NVM
 	bool "Open-Channel SSD target support"
-	depends on BLOCK
+	depends on BLOCK && HAS_DMA
 	help
 	  Say Y here to get to enable Open-channel SSDs.
 
diff --git a/drivers/lightnvm/Makefile b/drivers/lightnvm/Makefile
index a7a0a22..1f6b652 100644
--- a/drivers/lightnvm/Makefile
+++ b/drivers/lightnvm/Makefile
@@ -2,6 +2,6 @@
 # Makefile for Open-Channel SSDs.
 #
 
-obj-$(CONFIG_NVM)		:= core.o sysblk.o
+obj-$(CONFIG_NVM)		:= core.o sysblk.o sysfs.o
 obj-$(CONFIG_NVM_GENNVM) 	+= gennvm.o
 obj-$(CONFIG_NVM_RRPC)		+= rrpc.o
diff --git a/drivers/lightnvm/core.c b/drivers/lightnvm/core.c
index c784ddc..1cac0f8 100644
--- a/drivers/lightnvm/core.c
+++ b/drivers/lightnvm/core.c
@@ -27,6 +27,8 @@
 #include <linux/lightnvm.h>
 #include <linux/sched/sysctl.h>
 
+#include "lightnvm.h"
+
 static LIST_HEAD(nvm_tgt_types);
 static DECLARE_RWSEM(nvm_tgtt_lock);
 static LIST_HEAD(nvm_mgrs);
@@ -581,6 +583,8 @@
 	mutex_init(&dev->mlock);
 	spin_lock_init(&dev->lock);
 
+	blk_queue_logical_block_size(dev->q, dev->sec_size);
+
 	return 0;
 err_fmtype:
 	kfree(dev->lun_map);
@@ -596,15 +600,19 @@
 	dev->mt = NULL;
 }
 
-static void nvm_free(struct nvm_dev *dev)
+void nvm_free(struct nvm_dev *dev)
 {
 	if (!dev)
 		return;
 
 	nvm_free_mgr(dev);
 
+	if (dev->dma_pool)
+		dev->ops->destroy_dma_pool(dev->dma_pool);
+
 	kfree(dev->lptbl);
 	kfree(dev->lun_map);
+	kfree(dev);
 }
 
 static int nvm_init(struct nvm_dev *dev)
@@ -651,30 +659,19 @@
 
 static void nvm_exit(struct nvm_dev *dev)
 {
-	if (dev->dma_pool)
-		dev->ops->destroy_dma_pool(dev->dma_pool);
-	nvm_free(dev);
-
-	pr_info("nvm: successfully unloaded\n");
+	nvm_sysfs_unregister_dev(dev);
 }
 
-int nvm_register(struct request_queue *q, char *disk_name,
-							struct nvm_dev_ops *ops)
+struct nvm_dev *nvm_alloc_dev(int node)
 {
-	struct nvm_dev *dev;
+	return kzalloc_node(sizeof(struct nvm_dev), GFP_KERNEL, node);
+}
+EXPORT_SYMBOL(nvm_alloc_dev);
+
+int nvm_register(struct nvm_dev *dev)
+{
 	int ret;
 
-	if (!ops->identity)
-		return -EINVAL;
-
-	dev = kzalloc(sizeof(struct nvm_dev), GFP_KERNEL);
-	if (!dev)
-		return -ENOMEM;
-
-	dev->q = q;
-	dev->ops = ops;
-	strncpy(dev->name, disk_name, DISK_NAME_LEN);
-
 	ret = nvm_init(dev);
 	if (ret)
 		goto err_init;
@@ -694,6 +691,10 @@
 		}
 	}
 
+	ret = nvm_sysfs_register_dev(dev);
+	if (ret)
+		goto err_ppalist;
+
 	if (dev->identity.cap & NVM_ID_DCAP_BBLKMGMT) {
 		ret = nvm_get_sysblock(dev, &dev->sb);
 		if (!ret)
@@ -710,31 +711,21 @@
 	up_write(&nvm_lock);
 
 	return 0;
+err_ppalist:
+	dev->ops->destroy_dma_pool(dev->dma_pool);
 err_init:
 	kfree(dev->lun_map);
-	kfree(dev);
 	return ret;
 }
 EXPORT_SYMBOL(nvm_register);
 
-void nvm_unregister(char *disk_name)
+void nvm_unregister(struct nvm_dev *dev)
 {
-	struct nvm_dev *dev;
-
 	down_write(&nvm_lock);
-	dev = nvm_find_nvm_dev(disk_name);
-	if (!dev) {
-		pr_err("nvm: could not find device %s to unregister\n",
-								disk_name);
-		up_write(&nvm_lock);
-		return;
-	}
-
 	list_del(&dev->devices);
 	up_write(&nvm_lock);
 
 	nvm_exit(dev);
-	kfree(dev);
 }
 EXPORT_SYMBOL(nvm_unregister);
 
diff --git a/drivers/lightnvm/lightnvm.h b/drivers/lightnvm/lightnvm.h
new file mode 100644
index 0000000..305c181
--- /dev/null
+++ b/drivers/lightnvm/lightnvm.h
@@ -0,0 +1,35 @@
+/*
+ * Copyright (C) 2016 CNEX Labs. All rights reserved.
+ * Initial release: Matias Bjorling <matias@cnexlabs.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.  If not, write to
+ * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139,
+ * USA.
+ *
+ */
+
+#ifndef LIGHTNVM_H
+#define LIGHTNVM_H
+
+#include <linux/lightnvm.h>
+
+/* core -> sysfs.c */
+int __must_check nvm_sysfs_register_dev(struct nvm_dev *);
+void nvm_sysfs_unregister_dev(struct nvm_dev *);
+int nvm_sysfs_register(void);
+void nvm_sysfs_unregister(void);
+
+/* sysfs > core */
+void nvm_free(struct nvm_dev *);
+
+#endif
diff --git a/drivers/lightnvm/sysfs.c b/drivers/lightnvm/sysfs.c
new file mode 100644
index 0000000..0338c27
--- /dev/null
+++ b/drivers/lightnvm/sysfs.c
@@ -0,0 +1,198 @@
+#include <linux/kernel.h>
+#include <linux/lightnvm.h>
+#include <linux/miscdevice.h>
+#include <linux/kobject.h>
+#include <linux/blk-mq.h>
+
+#include "lightnvm.h"
+
+static ssize_t nvm_dev_attr_show(struct device *dev,
+				 struct device_attribute *dattr, char *page)
+{
+	struct nvm_dev *ndev = container_of(dev, struct nvm_dev, dev);
+	struct nvm_id *id = &ndev->identity;
+	struct nvm_id_group *grp = &id->groups[0];
+	struct attribute *attr = &dattr->attr;
+
+	if (strcmp(attr->name, "version") == 0) {
+		return scnprintf(page, PAGE_SIZE, "%u\n", id->ver_id);
+	} else if (strcmp(attr->name, "vendor_opcode") == 0) {
+		return scnprintf(page, PAGE_SIZE, "%u\n", id->vmnt);
+	} else if (strcmp(attr->name, "capabilities") == 0) {
+		return scnprintf(page, PAGE_SIZE, "%u\n", id->cap);
+	} else if (strcmp(attr->name, "device_mode") == 0) {
+		return scnprintf(page, PAGE_SIZE, "%u\n", id->dom);
+	} else if (strcmp(attr->name, "media_manager") == 0) {
+		if (!ndev->mt)
+			return scnprintf(page, PAGE_SIZE, "%s\n", "none");
+		return scnprintf(page, PAGE_SIZE, "%s\n", ndev->mt->name);
+	} else if (strcmp(attr->name, "ppa_format") == 0) {
+		return scnprintf(page, PAGE_SIZE,
+			"0x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x\n",
+			id->ppaf.ch_offset, id->ppaf.ch_len,
+			id->ppaf.lun_offset, id->ppaf.lun_len,
+			id->ppaf.pln_offset, id->ppaf.pln_len,
+			id->ppaf.blk_offset, id->ppaf.blk_len,
+			id->ppaf.pg_offset, id->ppaf.pg_len,
+			id->ppaf.sect_offset, id->ppaf.sect_len);
+	} else if (strcmp(attr->name, "media_type") == 0) {	/* u8 */
+		return scnprintf(page, PAGE_SIZE, "%u\n", grp->mtype);
+	} else if (strcmp(attr->name, "flash_media_type") == 0) {
+		return scnprintf(page, PAGE_SIZE, "%u\n", grp->fmtype);
+	} else if (strcmp(attr->name, "num_channels") == 0) {
+		return scnprintf(page, PAGE_SIZE, "%u\n", grp->num_ch);
+	} else if (strcmp(attr->name, "num_luns") == 0) {
+		return scnprintf(page, PAGE_SIZE, "%u\n", grp->num_lun);
+	} else if (strcmp(attr->name, "num_planes") == 0) {
+		return scnprintf(page, PAGE_SIZE, "%u\n", grp->num_pln);
+	} else if (strcmp(attr->name, "num_blocks") == 0) {	/* u16 */
+		return scnprintf(page, PAGE_SIZE, "%u\n", grp->num_blk);
+	} else if (strcmp(attr->name, "num_pages") == 0) {
+		return scnprintf(page, PAGE_SIZE, "%u\n", grp->num_pg);
+	} else if (strcmp(attr->name, "page_size") == 0) {
+		return scnprintf(page, PAGE_SIZE, "%u\n", grp->fpg_sz);
+	} else if (strcmp(attr->name, "hw_sector_size") == 0) {
+		return scnprintf(page, PAGE_SIZE, "%u\n", grp->csecs);
+	} else if (strcmp(attr->name, "oob_sector_size") == 0) {/* u32 */
+		return scnprintf(page, PAGE_SIZE, "%u\n", grp->sos);
+	} else if (strcmp(attr->name, "read_typ") == 0) {
+		return scnprintf(page, PAGE_SIZE, "%u\n", grp->trdt);
+	} else if (strcmp(attr->name, "read_max") == 0) {
+		return scnprintf(page, PAGE_SIZE, "%u\n", grp->trdm);
+	} else if (strcmp(attr->name, "prog_typ") == 0) {
+		return scnprintf(page, PAGE_SIZE, "%u\n", grp->tprt);
+	} else if (strcmp(attr->name, "prog_max") == 0) {
+		return scnprintf(page, PAGE_SIZE, "%u\n", grp->tprm);
+	} else if (strcmp(attr->name, "erase_typ") == 0) {
+		return scnprintf(page, PAGE_SIZE, "%u\n", grp->tbet);
+	} else if (strcmp(attr->name, "erase_max") == 0) {
+		return scnprintf(page, PAGE_SIZE, "%u\n", grp->tbem);
+	} else if (strcmp(attr->name, "multiplane_modes") == 0) {
+		return scnprintf(page, PAGE_SIZE, "0x%08x\n", grp->mpos);
+	} else if (strcmp(attr->name, "media_capabilities") == 0) {
+		return scnprintf(page, PAGE_SIZE, "0x%08x\n", grp->mccap);
+	} else if (strcmp(attr->name, "max_phys_secs") == 0) {
+		return scnprintf(page, PAGE_SIZE, "%u\n",
+				ndev->ops->max_phys_sect);
+	} else {
+		return scnprintf(page,
+				 PAGE_SIZE,
+				 "Unhandled attr(%s) in `nvm_dev_attr_show`\n",
+				 attr->name);
+	}
+}
+
+#define NVM_DEV_ATTR_RO(_name)						\
+	DEVICE_ATTR(_name, S_IRUGO, nvm_dev_attr_show, NULL)
+
+static NVM_DEV_ATTR_RO(version);
+static NVM_DEV_ATTR_RO(vendor_opcode);
+static NVM_DEV_ATTR_RO(capabilities);
+static NVM_DEV_ATTR_RO(device_mode);
+static NVM_DEV_ATTR_RO(ppa_format);
+static NVM_DEV_ATTR_RO(media_manager);
+
+static NVM_DEV_ATTR_RO(media_type);
+static NVM_DEV_ATTR_RO(flash_media_type);
+static NVM_DEV_ATTR_RO(num_channels);
+static NVM_DEV_ATTR_RO(num_luns);
+static NVM_DEV_ATTR_RO(num_planes);
+static NVM_DEV_ATTR_RO(num_blocks);
+static NVM_DEV_ATTR_RO(num_pages);
+static NVM_DEV_ATTR_RO(page_size);
+static NVM_DEV_ATTR_RO(hw_sector_size);
+static NVM_DEV_ATTR_RO(oob_sector_size);
+static NVM_DEV_ATTR_RO(read_typ);
+static NVM_DEV_ATTR_RO(read_max);
+static NVM_DEV_ATTR_RO(prog_typ);
+static NVM_DEV_ATTR_RO(prog_max);
+static NVM_DEV_ATTR_RO(erase_typ);
+static NVM_DEV_ATTR_RO(erase_max);
+static NVM_DEV_ATTR_RO(multiplane_modes);
+static NVM_DEV_ATTR_RO(media_capabilities);
+static NVM_DEV_ATTR_RO(max_phys_secs);
+
+#define NVM_DEV_ATTR(_name) (dev_attr_##_name##)
+
+static struct attribute *nvm_dev_attrs[] = {
+	&dev_attr_version.attr,
+	&dev_attr_vendor_opcode.attr,
+	&dev_attr_capabilities.attr,
+	&dev_attr_device_mode.attr,
+	&dev_attr_media_manager.attr,
+
+	&dev_attr_ppa_format.attr,
+	&dev_attr_media_type.attr,
+	&dev_attr_flash_media_type.attr,
+	&dev_attr_num_channels.attr,
+	&dev_attr_num_luns.attr,
+	&dev_attr_num_planes.attr,
+	&dev_attr_num_blocks.attr,
+	&dev_attr_num_pages.attr,
+	&dev_attr_page_size.attr,
+	&dev_attr_hw_sector_size.attr,
+	&dev_attr_oob_sector_size.attr,
+	&dev_attr_read_typ.attr,
+	&dev_attr_read_max.attr,
+	&dev_attr_prog_typ.attr,
+	&dev_attr_prog_max.attr,
+	&dev_attr_erase_typ.attr,
+	&dev_attr_erase_max.attr,
+	&dev_attr_multiplane_modes.attr,
+	&dev_attr_media_capabilities.attr,
+	&dev_attr_max_phys_secs.attr,
+	NULL,
+};
+
+static struct attribute_group nvm_dev_attr_group = {
+	.name = "lightnvm",
+	.attrs = nvm_dev_attrs,
+};
+
+static const struct attribute_group *nvm_dev_attr_groups[] = {
+	&nvm_dev_attr_group,
+	NULL,
+};
+
+static void nvm_dev_release(struct device *device)
+{
+	struct nvm_dev *dev = container_of(device, struct nvm_dev, dev);
+	struct request_queue *q = dev->q;
+
+	pr_debug("nvm/sysfs: `nvm_dev_release`\n");
+
+	blk_mq_unregister_dev(device, q);
+
+	nvm_free(dev);
+}
+
+static struct device_type nvm_type = {
+	.name		= "lightnvm",
+	.groups		= nvm_dev_attr_groups,
+	.release	= nvm_dev_release,
+};
+
+int nvm_sysfs_register_dev(struct nvm_dev *dev)
+{
+	int ret;
+
+	if (!dev->parent_dev)
+		return 0;
+
+	dev->dev.parent = dev->parent_dev;
+	dev_set_name(&dev->dev, "%s", dev->name);
+	dev->dev.type = &nvm_type;
+	device_initialize(&dev->dev);
+	ret = device_add(&dev->dev);
+
+	if (!ret)
+		blk_mq_register_dev(&dev->dev, dev->q);
+
+	return ret;
+}
+
+void nvm_sysfs_unregister_dev(struct nvm_dev *dev)
+{
+	if (dev && dev->parent_dev)
+		kobject_put(&dev->dev.kobj);
+}
diff --git a/drivers/macintosh/macio_asic.c b/drivers/macintosh/macio_asic.c
index b6819f0..3f041b1 100644
--- a/drivers/macintosh/macio_asic.c
+++ b/drivers/macintosh/macio_asic.c
@@ -236,7 +236,7 @@
 	unsigned int irq;
 
 	irq = irq_create_mapping(NULL, line);
-	if (irq != NO_IRQ) {
+	if (!irq) {
 		dev->interrupt[index].start = irq;
 		dev->interrupt[index].flags = IORESOURCE_IRQ;
 		dev->interrupt[index].name = dev_name(&dev->ofdev.dev);
@@ -299,7 +299,7 @@
 			break;
 		res = &dev->interrupt[j];
 		irq = irq_of_parse_and_map(np, i++);
-		if (irq == NO_IRQ)
+		if (!irq)
 			break;
 		res->start = irq;
 		res->flags = IORESOURCE_IRQ;
diff --git a/drivers/macintosh/rack-meter.c b/drivers/macintosh/rack-meter.c
index 465c522..7755271 100644
--- a/drivers/macintosh/rack-meter.c
+++ b/drivers/macintosh/rack-meter.c
@@ -427,7 +427,7 @@
 	rm->irq = macio_irq(mdev, 1);
 #else
 	rm->irq = irq_of_parse_and_map(i2s, 1);
-	if (rm->irq == NO_IRQ ||
+	if (!rm->irq ||
 	    of_address_to_resource(i2s, 0, &ri2s) ||
 	    of_address_to_resource(i2s, 1, &rdma)) {
 		printk(KERN_ERR
diff --git a/drivers/macintosh/smu.c b/drivers/macintosh/smu.c
index d6f72c8..08edb2c 100644
--- a/drivers/macintosh/smu.c
+++ b/drivers/macintosh/smu.c
@@ -279,7 +279,7 @@
 	spin_unlock_irqrestore(&smu->lock, flags);
 
 	/* Workaround for early calls when irq isn't available */
-	if (!smu_irq_inited || smu->db_irq == NO_IRQ)
+	if (!smu_irq_inited || !smu->db_irq)
 		smu_spinwait_cmd(cmd);
 
 	return 0;
@@ -498,8 +498,8 @@
 	INIT_LIST_HEAD(&smu->cmd_list);
 	INIT_LIST_HEAD(&smu->cmd_i2c_list);
 	smu->of_node = np;
-	smu->db_irq = NO_IRQ;
-	smu->msg_irq = NO_IRQ;
+	smu->db_irq = 0;
+	smu->msg_irq = 0;
 
 	/* smu_cmdbuf_abs is in the low 2G of RAM, can be converted to a
 	 * 32 bits value safely
@@ -587,13 +587,13 @@
 
 	if (smu->db_node) {
 		smu->db_irq = irq_of_parse_and_map(smu->db_node, 0);
-		if (smu->db_irq == NO_IRQ)
+		if (!smu->db_irq)
 			printk(KERN_ERR "smu: failed to map irq for node %s\n",
 			       smu->db_node->full_name);
 	}
 	if (smu->msg_node) {
 		smu->msg_irq = irq_of_parse_and_map(smu->msg_node, 0);
-		if (smu->msg_irq == NO_IRQ)
+		if (!smu->msg_irq)
 			printk(KERN_ERR "smu: failed to map irq for node %s\n",
 			       smu->msg_node->full_name);
 	}
@@ -602,23 +602,23 @@
 	 * Try to request the interrupts
 	 */
 
-	if (smu->db_irq != NO_IRQ) {
+	if (smu->db_irq) {
 		if (request_irq(smu->db_irq, smu_db_intr,
 				IRQF_SHARED, "SMU doorbell", smu) < 0) {
 			printk(KERN_WARNING "SMU: can't "
 			       "request interrupt %d\n",
 			       smu->db_irq);
-			smu->db_irq = NO_IRQ;
+			smu->db_irq = 0;
 		}
 	}
 
-	if (smu->msg_irq != NO_IRQ) {
+	if (smu->msg_irq) {
 		if (request_irq(smu->msg_irq, smu_msg_intr,
 				IRQF_SHARED, "SMU message", smu) < 0) {
 			printk(KERN_WARNING "SMU: can't "
 			       "request interrupt %d\n",
 			       smu->msg_irq);
-			smu->msg_irq = NO_IRQ;
+			smu->msg_irq = 0;
 		}
 	}
 
diff --git a/drivers/macintosh/via-cuda.c b/drivers/macintosh/via-cuda.c
index bad1813..2088e23 100644
--- a/drivers/macintosh/via-cuda.c
+++ b/drivers/macintosh/via-cuda.c
@@ -209,7 +209,7 @@
     cuda_irq = IRQ_MAC_ADB;
 #else
     cuda_irq = irq_of_parse_and_map(vias, 0);
-    if (cuda_irq == NO_IRQ) {
+    if (!cuda_irq) {
 	printk(KERN_ERR "via-cuda: can't map interrupts for %s\n",
 	       vias->full_name);
 	return -ENODEV;
diff --git a/drivers/macintosh/via-pmu.c b/drivers/macintosh/via-pmu.c
index f8b6d14..91081dc 100644
--- a/drivers/macintosh/via-pmu.c
+++ b/drivers/macintosh/via-pmu.c
@@ -145,7 +145,7 @@
 static int pmu_has_adb;
 static struct device_node *gpio_node;
 static unsigned char __iomem *gpio_reg;
-static int gpio_irq = NO_IRQ;
+static int gpio_irq = 0;
 static int gpio_irq_enabled = -1;
 static volatile int pmu_suspended;
 static spinlock_t pmu_lock;
@@ -402,7 +402,7 @@
 	batt_req.complete = 1;
 
 	irq = irq_of_parse_and_map(vias, 0);
-	if (irq == NO_IRQ) {
+	if (!irq) {
 		printk(KERN_ERR "via-pmu: can't map interrupt\n");
 		return -ENODEV;
 	}
@@ -424,7 +424,7 @@
 		if (gpio_node)
 			gpio_irq = irq_of_parse_and_map(gpio_node, 0);
 
-		if (gpio_irq != NO_IRQ) {
+		if (gpio_irq) {
 			if (request_irq(gpio_irq, gpio1_interrupt,
 					IRQF_NO_SUSPEND, "GPIO1 ADB",
 					(void *)0))
diff --git a/drivers/md/bcache/btree.c b/drivers/md/bcache/btree.c
index 76f7534..81d3db4 100644
--- a/drivers/md/bcache/btree.c
+++ b/drivers/md/bcache/btree.c
@@ -361,12 +361,8 @@
 static void btree_node_write_done(struct closure *cl)
 {
 	struct btree *b = container_of(cl, struct btree, io);
-	struct bio_vec *bv;
-	int n;
 
-	bio_for_each_segment_all(bv, b->bio, n)
-		__free_page(bv->bv_page);
-
+	bio_free_pages(b->bio);
 	__btree_node_write_done(cl);
 }
 
diff --git a/drivers/md/bcache/debug.c b/drivers/md/bcache/debug.c
index c28df164..333a1e5 100644
--- a/drivers/md/bcache/debug.c
+++ b/drivers/md/bcache/debug.c
@@ -107,9 +107,8 @@
 {
 	char name[BDEVNAME_SIZE];
 	struct bio *check;
-	struct bio_vec bv, *bv2;
+	struct bio_vec bv;
 	struct bvec_iter iter;
-	int i;
 
 	check = bio_clone(bio, GFP_NOIO);
 	if (!check)
@@ -136,8 +135,7 @@
 		kunmap_atomic(p1);
 	}
 
-	bio_for_each_segment_all(bv2, check, i)
-		__free_page(bv2->bv_page);
+	bio_free_pages(check);
 out_put:
 	bio_put(check);
 }
diff --git a/drivers/md/bcache/movinggc.c b/drivers/md/bcache/movinggc.c
index 1881319..5c4bdde 100644
--- a/drivers/md/bcache/movinggc.c
+++ b/drivers/md/bcache/movinggc.c
@@ -44,11 +44,8 @@
 {
 	struct moving_io *io = container_of(cl, struct moving_io, cl);
 	struct bio *bio = &io->bio.bio;
-	struct bio_vec *bv;
-	int i;
 
-	bio_for_each_segment_all(bv, bio, i)
-		__free_page(bv->bv_page);
+	bio_free_pages(bio);
 
 	if (io->op.replace_collision)
 		trace_bcache_gc_copy_collision(&io->w->key);
diff --git a/drivers/md/bcache/request.c b/drivers/md/bcache/request.c
index 4b177fe..40ffe5e 100644
--- a/drivers/md/bcache/request.c
+++ b/drivers/md/bcache/request.c
@@ -694,13 +694,8 @@
 	if (s->iop.replace_collision)
 		bch_mark_cache_miss_collision(s->iop.c, s->d);
 
-	if (s->iop.bio) {
-		int i;
-		struct bio_vec *bv;
-
-		bio_for_each_segment_all(bv, s->iop.bio, i)
-			__free_page(bv->bv_page);
-	}
+	if (s->iop.bio)
+		bio_free_pages(s->iop.bio);
 
 	cached_dev_bio_complete(cl);
 }
diff --git a/drivers/md/bcache/writeback.c b/drivers/md/bcache/writeback.c
index d9fd2a6..e51644e 100644
--- a/drivers/md/bcache/writeback.c
+++ b/drivers/md/bcache/writeback.c
@@ -128,11 +128,8 @@
 	struct dirty_io *io = container_of(cl, struct dirty_io, cl);
 	struct keybuf_key *w = io->bio.bi_private;
 	struct cached_dev *dc = io->dc;
-	struct bio_vec *bv;
-	int i;
 
-	bio_for_each_segment_all(bv, &io->bio, i)
-		__free_page(bv->bv_page);
+	bio_free_pages(&io->bio);
 
 	/* This is kind of a dumb way of signalling errors. */
 	if (KEY_DIRTY(&w->key)) {
diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c
index 8742957..0448e7e 100644
--- a/drivers/md/dm-crypt.c
+++ b/drivers/md/dm-crypt.c
@@ -1136,7 +1136,7 @@
 	clone->bi_private = io;
 	clone->bi_end_io  = crypt_endio;
 	clone->bi_bdev    = cc->dev->bdev;
-	bio_set_op_attrs(clone, bio_op(io->base_bio), io->base_bio->bi_opf);
+	bio_set_op_attrs(clone, bio_op(io->base_bio), bio_flags(io->base_bio));
 }
 
 static int kcryptd_io_read(struct dm_crypt_io *io, gfp_t gfp)
diff --git a/drivers/md/dm-log-writes.c b/drivers/md/dm-log-writes.c
index 49e4d8d..4dfe386 100644
--- a/drivers/md/dm-log-writes.c
+++ b/drivers/md/dm-log-writes.c
@@ -149,8 +149,6 @@
 static void log_end_io(struct bio *bio)
 {
 	struct log_writes_c *lc = bio->bi_private;
-	struct bio_vec *bvec;
-	int i;
 
 	if (bio->bi_error) {
 		unsigned long flags;
@@ -161,9 +159,7 @@
 		spin_unlock_irqrestore(&lc->blocks_lock, flags);
 	}
 
-	bio_for_each_segment_all(bvec, bio, i)
-		__free_page(bvec->bv_page);
-
+	bio_free_pages(bio);
 	put_io_block(lc);
 	bio_put(bio);
 }
diff --git a/drivers/md/dm-rq.c b/drivers/md/dm-rq.c
index 1ca7463..ee48230 100644
--- a/drivers/md/dm-rq.c
+++ b/drivers/md/dm-rq.c
@@ -955,7 +955,7 @@
 	dm_init_md_queue(md);
 
 	/* backfill 'mq' sysfs registration normally done in blk_register_queue */
-	blk_mq_register_disk(md->disk);
+	blk_mq_register_dev(disk_to_dev(md->disk), q);
 
 	return 0;
 
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index 21dc00e..1961d82 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -145,12 +145,8 @@
 	return r1_bio;
 
 out_free_pages:
-	while (--j >= 0) {
-		struct bio_vec *bv;
-
-		bio_for_each_segment_all(bv, r1_bio->bios[j], i)
-			__free_page(bv->bv_page);
-	}
+	while (--j >= 0)
+		bio_free_pages(r1_bio->bios[j]);
 
 out_free_bio:
 	while (++j < pi->raid_disks)
diff --git a/drivers/media/rc/meson-ir.c b/drivers/media/rc/meson-ir.c
index fcc3b82..003fff0 100644
--- a/drivers/media/rc/meson-ir.c
+++ b/drivers/media/rc/meson-ir.c
@@ -24,6 +24,7 @@
 
 #define DRIVER_NAME		"meson-ir"
 
+/* valid on all Meson platforms */
 #define IR_DEC_LDR_ACTIVE	0x00
 #define IR_DEC_LDR_IDLE		0x04
 #define IR_DEC_LDR_REPEAT	0x08
@@ -32,12 +33,21 @@
 #define IR_DEC_FRAME		0x14
 #define IR_DEC_STATUS		0x18
 #define IR_DEC_REG1		0x1c
+/* only available on Meson 8b and newer */
+#define IR_DEC_REG2		0x20
 
 #define REG0_RATE_MASK		(BIT(11) - 1)
 
-#define REG1_MODE_MASK		(BIT(7) | BIT(8))
-#define REG1_MODE_NEC		(0 << 7)
-#define REG1_MODE_GENERAL	(2 << 7)
+#define DECODE_MODE_NEC		0x0
+#define DECODE_MODE_RAW		0x2
+
+/* Meson 6b uses REG1 to configure the mode */
+#define REG1_MODE_MASK		GENMASK(8, 7)
+#define REG1_MODE_SHIFT		7
+
+/* Meson 8b / GXBB use REG2 to configure the mode */
+#define REG2_MODE_MASK		GENMASK(3, 0)
+#define REG2_MODE_SHIFT		0
 
 #define REG1_TIME_IV_SHIFT	16
 #define REG1_TIME_IV_MASK	((BIT(13) - 1) << REG1_TIME_IV_SHIFT)
@@ -158,8 +168,15 @@
 	/* Reset the decoder */
 	meson_ir_set_mask(ir, IR_DEC_REG1, REG1_RESET, REG1_RESET);
 	meson_ir_set_mask(ir, IR_DEC_REG1, REG1_RESET, 0);
-	/* Set general operation mode */
-	meson_ir_set_mask(ir, IR_DEC_REG1, REG1_MODE_MASK, REG1_MODE_GENERAL);
+
+	/* Set general operation mode (= raw/software decoding) */
+	if (of_device_is_compatible(node, "amlogic,meson6-ir"))
+		meson_ir_set_mask(ir, IR_DEC_REG1, REG1_MODE_MASK,
+				  DECODE_MODE_RAW << REG1_MODE_SHIFT);
+	else
+		meson_ir_set_mask(ir, IR_DEC_REG2, REG2_MODE_MASK,
+				  DECODE_MODE_RAW << REG2_MODE_SHIFT);
+
 	/* Set rate */
 	meson_ir_set_mask(ir, IR_DEC_REG0, REG0_RATE_MASK, MESON_TRATE - 1);
 	/* IRQ on rising and falling edges */
@@ -197,6 +214,8 @@
 
 static const struct of_device_id meson_ir_match[] = {
 	{ .compatible = "amlogic,meson6-ir" },
+	{ .compatible = "amlogic,meson8b-ir" },
+	{ .compatible = "amlogic,meson-gxbb-ir" },
 	{ },
 };
 
diff --git a/drivers/memory/atmel-ebi.c b/drivers/memory/atmel-ebi.c
index f87ad6f..b5ed3bd 100644
--- a/drivers/memory/atmel-ebi.c
+++ b/drivers/memory/atmel-ebi.c
@@ -410,10 +410,7 @@
 
 	field.reg = AT91SAM9_SMC_MODE(AT91SAM9_SMC_GENERIC);
 	fields->mode = devm_regmap_field_alloc(ebi->dev, ebi->smc, field);
-	if (IS_ERR(fields->mode))
-		return PTR_ERR(fields->mode);
-
-	return 0;
+	return PTR_ERR_OR_ZERO(fields->mode);
 }
 
 static int sama5d3_ebi_init(struct at91_ebi *ebi)
@@ -441,10 +438,7 @@
 
 	field.reg = SAMA5_SMC_MODE(SAMA5_SMC_GENERIC);
 	fields->mode = devm_regmap_field_alloc(ebi->dev, ebi->smc, field);
-	if (IS_ERR(fields->mode))
-		return PTR_ERR(fields->mode);
-
-	return 0;
+	return PTR_ERR_OR_ZERO(fields->mode);
 }
 
 static int at91_ebi_dev_setup(struct at91_ebi *ebi, struct device_node *np,
diff --git a/drivers/memory/atmel-sdramc.c b/drivers/memory/atmel-sdramc.c
index 53a341f..12080b0 100644
--- a/drivers/memory/atmel-sdramc.c
+++ b/drivers/memory/atmel-sdramc.c
@@ -53,12 +53,10 @@
 
 static int atmel_ramc_probe(struct platform_device *pdev)
 {
-	const struct of_device_id *match;
 	const struct at91_ramc_caps *caps;
 	struct clk *clk;
 
-	match = of_match_device(atmel_ramc_of_match, &pdev->dev);
-	caps = match->data;
+	caps = of_device_get_match_data(&pdev->dev);
 
 	if (caps->has_ddrck) {
 		clk = devm_clk_get(&pdev->dev, "ddrck");
diff --git a/drivers/memory/omap-gpmc.c b/drivers/memory/omap-gpmc.c
index f00f3e7..5457c36 100644
--- a/drivers/memory/omap-gpmc.c
+++ b/drivers/memory/omap-gpmc.c
@@ -350,8 +350,8 @@
 	return (time_ps + tick_ps - 1) / tick_ps;
 }
 
-unsigned int gpmc_clk_ticks_to_ns(unsigned ticks, int cs,
-				  enum gpmc_clk_domain cd)
+static unsigned int gpmc_clk_ticks_to_ns(unsigned int ticks, int cs,
+					 enum gpmc_clk_domain cd)
 {
 	return ticks * gpmc_get_clk_period(cs, cd) / 1000;
 }
@@ -2143,9 +2143,7 @@
 	ret = -ENODEV;
 
 err_cs:
-	if (waitpin_desc)
-		gpiochip_free_own_desc(waitpin_desc);
-
+	gpiochip_free_own_desc(waitpin_desc);
 err:
 	gpmc_cs_free(cs);
 
@@ -2265,7 +2263,7 @@
 	gpmc->gpio_chip.get = gpmc_gpio_get;
 	gpmc->gpio_chip.base = -1;
 
-	ret = gpiochip_add(&gpmc->gpio_chip);
+	ret = devm_gpiochip_add_data(gpmc->dev, &gpmc->gpio_chip, NULL);
 	if (ret < 0) {
 		dev_err(gpmc->dev, "could not register gpio chip: %d\n", ret);
 		return ret;
@@ -2274,11 +2272,6 @@
 	return 0;
 }
 
-static void gpmc_gpio_exit(struct gpmc_device *gpmc)
-{
-	gpiochip_remove(&gpmc->gpio_chip);
-}
-
 static int gpmc_probe(struct platform_device *pdev)
 {
 	int rc;
@@ -2365,15 +2358,13 @@
 	rc = gpmc_setup_irq(gpmc);
 	if (rc) {
 		dev_err(gpmc->dev, "gpmc_setup_irq failed\n");
-		goto setup_irq_failed;
+		goto gpio_init_failed;
 	}
 
 	gpmc_probe_dt_children(pdev);
 
 	return 0;
 
-setup_irq_failed:
-	gpmc_gpio_exit(gpmc);
 gpio_init_failed:
 	gpmc_mem_exit();
 	pm_runtime_put_sync(&pdev->dev);
@@ -2387,7 +2378,6 @@
 	struct gpmc_device *gpmc = platform_get_drvdata(pdev);
 
 	gpmc_free_irq(gpmc);
-	gpmc_gpio_exit(gpmc);
 	gpmc_mem_exit();
 	pm_runtime_put_sync(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
diff --git a/drivers/misc/cxl/cxl.h b/drivers/misc/cxl/cxl.h
index 344a0ff..01d372a 100644
--- a/drivers/misc/cxl/cxl.h
+++ b/drivers/misc/cxl/cxl.h
@@ -162,7 +162,10 @@
 #define CXL_PSL_SPAP_V    0x0000000000000001ULL
 
 /****** CXL_PSL_Control ****************************************************/
-#define CXL_PSL_Control_tb 0x0000000000000001ULL
+#define CXL_PSL_Control_tb              (0x1ull << (63-63))
+#define CXL_PSL_Control_Fr              (0x1ull << (63-31))
+#define CXL_PSL_Control_Fs_MASK         (0x3ull << (63-29))
+#define CXL_PSL_Control_Fs_Complete     (0x3ull << (63-29))
 
 /****** CXL_PSL_DLCNTL *****************************************************/
 #define CXL_PSL_DLCNTL_D (0x1ull << (63-28))
@@ -854,6 +857,7 @@
 int cxl_check_error(struct cxl_afu *afu);
 int cxl_afu_slbia(struct cxl_afu *afu);
 int cxl_tlb_slb_invalidate(struct cxl *adapter);
+int cxl_data_cache_flush(struct cxl *adapter);
 int cxl_afu_disable(struct cxl_afu *afu);
 int cxl_psl_purge(struct cxl_afu *afu);
 
diff --git a/drivers/misc/cxl/native.c b/drivers/misc/cxl/native.c
index e606fdc..a217a74 100644
--- a/drivers/misc/cxl/native.c
+++ b/drivers/misc/cxl/native.c
@@ -290,6 +290,37 @@
 	return 0;
 }
 
+int cxl_data_cache_flush(struct cxl *adapter)
+{
+	u64 reg;
+	unsigned long timeout = jiffies + (HZ * CXL_TIMEOUT);
+
+	pr_devel("Flushing data cache\n");
+
+	reg = cxl_p1_read(adapter, CXL_PSL_Control);
+	reg |= CXL_PSL_Control_Fr;
+	cxl_p1_write(adapter, CXL_PSL_Control, reg);
+
+	reg = cxl_p1_read(adapter, CXL_PSL_Control);
+	while ((reg & CXL_PSL_Control_Fs_MASK) != CXL_PSL_Control_Fs_Complete) {
+		if (time_after_eq(jiffies, timeout)) {
+			dev_warn(&adapter->dev, "WARNING: cache flush timed out!\n");
+			return -EBUSY;
+		}
+
+		if (!cxl_ops->link_ok(adapter, NULL)) {
+			dev_warn(&adapter->dev, "WARNING: link down when flushing cache\n");
+			return -EIO;
+		}
+		cpu_relax();
+		reg = cxl_p1_read(adapter, CXL_PSL_Control);
+	}
+
+	reg &= ~CXL_PSL_Control_Fr;
+	cxl_p1_write(adapter, CXL_PSL_Control, reg);
+	return 0;
+}
+
 static int cxl_write_sstp(struct cxl_afu *afu, u64 sstp0, u64 sstp1)
 {
 	int rc;
diff --git a/drivers/misc/cxl/of.c b/drivers/misc/cxl/of.c
index edc4583..ec175ea 100644
--- a/drivers/misc/cxl/of.c
+++ b/drivers/misc/cxl/of.c
@@ -460,7 +460,7 @@
 	struct device_node *afu_np = NULL;
 	struct cxl *adapter = NULL;
 	int ret;
-	int slice, slice_ok;
+	int slice = 0, slice_ok = 0;
 
 	pr_devel("in %s\n", __func__);
 
@@ -476,13 +476,13 @@
 	}
 
 	/* init afu */
-	slice_ok = 0;
-	for (afu_np = NULL, slice = 0; (afu_np = of_get_next_child(np, afu_np)); slice++) {
+	for_each_child_of_node(np, afu_np) {
 		if ((ret = cxl_guest_init_afu(adapter, slice, afu_np)))
 			dev_err(&pdev->dev, "AFU %i failed to initialise: %i\n",
 				slice, ret);
 		else
 			slice_ok++;
+		slice++;
 	}
 
 	if (slice_ok == 0) {
@@ -490,8 +490,6 @@
 		adapter->slices = 0;
 	}
 
-	if (afu_np)
-		of_node_put(afu_np);
 	return 0;
 }
 
diff --git a/drivers/misc/cxl/pci.c b/drivers/misc/cxl/pci.c
index 6f0c4ac..7afad84 100644
--- a/drivers/misc/cxl/pci.c
+++ b/drivers/misc/cxl/pci.c
@@ -1239,6 +1239,9 @@
 
 	dev_info(&dev->dev, "CXL reset\n");
 
+	/* the adapter is about to be reset, so ignore errors */
+	cxl_data_cache_flush(adapter);
+
 	/* pcie_warm_reset requests a fundamental pci reset which includes a
 	 * PERST assert/deassert.  PERST triggers a loading of the image
 	 * if "user" or "factory" is selected in sysfs */
@@ -1530,11 +1533,11 @@
 {
 	if (dev->vendor == PCI_VENDOR_ID_MELLANOX && dev->device == 0x1013) {
 		/* Mellanox CX-4 */
-		dev_info(&adapter->dev, "Device uses an XSL\n");
+		dev_info(&dev->dev, "Device uses an XSL\n");
 		adapter->native->sl_ops = &xsl_ops;
 		adapter->min_pe = 1; /* Workaround for CX-4 hardware bug */
 	} else {
-		dev_info(&adapter->dev, "Device uses a PSL\n");
+		dev_info(&dev->dev, "Device uses a PSL\n");
 		adapter->native->sl_ops = &psl_ops;
 	}
 }
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index 392f9ef..5bcc896 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -78,7 +78,7 @@
 	bool "Support ARM Versatile physmap OF"
 	depends on MTD_PHYSMAP_OF
 	depends on MFD_SYSCON
-	default y if (ARCH_INTEGRATOR || ARCH_VERSATILE || REALVIEW_DT)
+	default y if (ARCH_INTEGRATOR || ARCH_VERSATILE || ARCH_REALVIEW)
 	help
 	  This provides some extra DT physmap parsing for the ARM Versatile
 	  platforms, basically to add a VPP (write protection) callback so
diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig
index c732b8c..3818c5e 100644
--- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
+++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
@@ -61,13 +61,13 @@
 config DWMAC_MESON
 	tristate "Amlogic Meson dwmac support"
 	default ARCH_MESON
-	depends on OF && (ARCH_MESON || COMPILE_TEST)
+	depends on OF && COMMON_CLK && (ARCH_MESON || COMPILE_TEST)
 	help
 	  Support for Ethernet controller on Amlogic Meson SoCs.
 
 	  This selects the Amlogic Meson SoC glue layer support for
-	  the stmmac device driver. This driver is used for Meson6 and
-	  Meson8 SoCs.
+	  the stmmac device driver. This driver is used for Meson6,
+	  Meson8, Meson8b and GXBB SoCs.
 
 config DWMAC_ROCKCHIP
 	tristate "Rockchip dwmac support"
diff --git a/drivers/net/ethernet/stmicro/stmmac/Makefile b/drivers/net/ethernet/stmicro/stmmac/Makefile
index f0c9396..5d6ece5 100644
--- a/drivers/net/ethernet/stmicro/stmmac/Makefile
+++ b/drivers/net/ethernet/stmicro/stmmac/Makefile
@@ -9,7 +9,7 @@
 obj-$(CONFIG_STMMAC_PLATFORM)	+= stmmac-platform.o
 obj-$(CONFIG_DWMAC_IPQ806X)	+= dwmac-ipq806x.o
 obj-$(CONFIG_DWMAC_LPC18XX)	+= dwmac-lpc18xx.o
-obj-$(CONFIG_DWMAC_MESON)	+= dwmac-meson.o
+obj-$(CONFIG_DWMAC_MESON)	+= dwmac-meson.o dwmac-meson8b.o
 obj-$(CONFIG_DWMAC_ROCKCHIP)	+= dwmac-rk.o
 obj-$(CONFIG_DWMAC_SOCFPGA)	+= dwmac-altr-socfpga.o
 obj-$(CONFIG_DWMAC_STI)		+= dwmac-sti.o
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-meson.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson.c
index c1bac19..309d995 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-meson.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson.c
@@ -1,5 +1,5 @@
 /*
- * Amlogic Meson DWMAC glue layer
+ * Amlogic Meson6 and Meson8 DWMAC glue layer
  *
  * Copyright (C) 2014 Beniamino Galvani <b.galvani@gmail.com>
  *
@@ -96,5 +96,5 @@
 module_platform_driver(meson6_dwmac_driver);
 
 MODULE_AUTHOR("Beniamino Galvani <b.galvani@gmail.com>");
-MODULE_DESCRIPTION("Amlogic Meson DWMAC glue layer");
+MODULE_DESCRIPTION("Amlogic Meson6 and Meson8 DWMAC glue layer");
 MODULE_LICENSE("GPL v2");
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
new file mode 100644
index 0000000..250e4ce
--- /dev/null
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
@@ -0,0 +1,324 @@
+/*
+ * Amlogic Meson8b and GXBB DWMAC glue layer
+ *
+ * Copyright (C) 2016 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/device.h>
+#include <linux/ethtool.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/module.h>
+#include <linux/of_net.h>
+#include <linux/mfd/syscon.h>
+#include <linux/platform_device.h>
+#include <linux/stmmac.h>
+
+#include "stmmac_platform.h"
+
+#define PRG_ETH0			0x0
+
+#define PRG_ETH0_RGMII_MODE		BIT(0)
+
+/* mux to choose between fclk_div2 (bit unset) and mpll2 (bit set) */
+#define PRG_ETH0_CLK_M250_SEL_SHIFT	4
+#define PRG_ETH0_CLK_M250_SEL_MASK	GENMASK(4, 4)
+
+#define PRG_ETH0_TXDLY_SHIFT		5
+#define PRG_ETH0_TXDLY_MASK		GENMASK(6, 5)
+#define PRG_ETH0_TXDLY_OFF		(0x0 << PRG_ETH0_TXDLY_SHIFT)
+#define PRG_ETH0_TXDLY_QUARTER		(0x1 << PRG_ETH0_TXDLY_SHIFT)
+#define PRG_ETH0_TXDLY_HALF		(0x2 << PRG_ETH0_TXDLY_SHIFT)
+#define PRG_ETH0_TXDLY_THREE_QUARTERS	(0x3 << PRG_ETH0_TXDLY_SHIFT)
+
+/* divider for the result of m250_sel */
+#define PRG_ETH0_CLK_M250_DIV_SHIFT	7
+#define PRG_ETH0_CLK_M250_DIV_WIDTH	3
+
+/* divides the result of m25_sel by either 5 (bit unset) or 10 (bit set) */
+#define PRG_ETH0_CLK_M25_DIV_SHIFT	10
+#define PRG_ETH0_CLK_M25_DIV_WIDTH	1
+
+#define PRG_ETH0_INVERTED_RMII_CLK	BIT(11)
+#define PRG_ETH0_TX_AND_PHY_REF_CLK	BIT(12)
+
+#define MUX_CLK_NUM_PARENTS		2
+
+struct meson8b_dwmac {
+	struct platform_device	*pdev;
+
+	void __iomem		*regs;
+
+	phy_interface_t		phy_mode;
+
+	struct clk_mux		m250_mux;
+	struct clk		*m250_mux_clk;
+	struct clk		*m250_mux_parent[MUX_CLK_NUM_PARENTS];
+
+	struct clk_divider	m250_div;
+	struct clk		*m250_div_clk;
+
+	struct clk_divider	m25_div;
+	struct clk		*m25_div_clk;
+};
+
+static void meson8b_dwmac_mask_bits(struct meson8b_dwmac *dwmac, u32 reg,
+				    u32 mask, u32 value)
+{
+	u32 data;
+
+	data = readl(dwmac->regs + reg);
+	data &= ~mask;
+	data |= (value & mask);
+
+	writel(data, dwmac->regs + reg);
+}
+
+static int meson8b_init_clk(struct meson8b_dwmac *dwmac)
+{
+	struct clk_init_data init;
+	int i, ret;
+	struct device *dev = &dwmac->pdev->dev;
+	char clk_name[32];
+	const char *clk_div_parents[1];
+	const char *mux_parent_names[MUX_CLK_NUM_PARENTS];
+	static struct clk_div_table clk_25m_div_table[] = {
+		{ .val = 0, .div = 5 },
+		{ .val = 1, .div = 10 },
+		{ /* sentinel */ },
+	};
+
+	/* get the mux parents from DT */
+	for (i = 0; i < MUX_CLK_NUM_PARENTS; i++) {
+		char name[16];
+
+		snprintf(name, sizeof(name), "clkin%d", i);
+		dwmac->m250_mux_parent[i] = devm_clk_get(dev, name);
+		if (IS_ERR(dwmac->m250_mux_parent[i])) {
+			ret = PTR_ERR(dwmac->m250_mux_parent[i]);
+			if (ret != -EPROBE_DEFER)
+				dev_err(dev, "Missing clock %s\n", name);
+			return ret;
+		}
+
+		mux_parent_names[i] =
+			__clk_get_name(dwmac->m250_mux_parent[i]);
+	}
+
+	/* create the m250_mux */
+	snprintf(clk_name, sizeof(clk_name), "%s#m250_sel", dev_name(dev));
+	init.name = clk_name;
+	init.ops = &clk_mux_ops;
+	init.flags = 0;
+	init.parent_names = mux_parent_names;
+	init.num_parents = MUX_CLK_NUM_PARENTS;
+
+	dwmac->m250_mux.reg = dwmac->regs + PRG_ETH0;
+	dwmac->m250_mux.shift = PRG_ETH0_CLK_M250_SEL_SHIFT;
+	dwmac->m250_mux.mask = PRG_ETH0_CLK_M250_SEL_MASK;
+	dwmac->m250_mux.flags = 0;
+	dwmac->m250_mux.table = NULL;
+	dwmac->m250_mux.hw.init = &init;
+
+	dwmac->m250_mux_clk = devm_clk_register(dev, &dwmac->m250_mux.hw);
+	if (WARN_ON(IS_ERR(dwmac->m250_mux_clk)))
+		return PTR_ERR(dwmac->m250_mux_clk);
+
+	/* create the m250_div */
+	snprintf(clk_name, sizeof(clk_name), "%s#m250_div", dev_name(dev));
+	init.name = devm_kstrdup(dev, clk_name, GFP_KERNEL);
+	init.ops = &clk_divider_ops;
+	init.flags = CLK_SET_RATE_PARENT;
+	clk_div_parents[0] = __clk_get_name(dwmac->m250_mux_clk);
+	init.parent_names = clk_div_parents;
+	init.num_parents = ARRAY_SIZE(clk_div_parents);
+
+	dwmac->m250_div.reg = dwmac->regs + PRG_ETH0;
+	dwmac->m250_div.shift = PRG_ETH0_CLK_M250_DIV_SHIFT;
+	dwmac->m250_div.width = PRG_ETH0_CLK_M250_DIV_WIDTH;
+	dwmac->m250_div.hw.init = &init;
+	dwmac->m250_div.flags = CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO;
+
+	dwmac->m250_div_clk = devm_clk_register(dev, &dwmac->m250_div.hw);
+	if (WARN_ON(IS_ERR(dwmac->m250_div_clk)))
+		return PTR_ERR(dwmac->m250_div_clk);
+
+	/* create the m25_div */
+	snprintf(clk_name, sizeof(clk_name), "%s#m25_div", dev_name(dev));
+	init.name = devm_kstrdup(dev, clk_name, GFP_KERNEL);
+	init.ops = &clk_divider_ops;
+	init.flags = CLK_IS_BASIC | CLK_SET_RATE_PARENT;
+	clk_div_parents[0] = __clk_get_name(dwmac->m250_div_clk);
+	init.parent_names = clk_div_parents;
+	init.num_parents = ARRAY_SIZE(clk_div_parents);
+
+	dwmac->m25_div.reg = dwmac->regs + PRG_ETH0;
+	dwmac->m25_div.shift = PRG_ETH0_CLK_M25_DIV_SHIFT;
+	dwmac->m25_div.width = PRG_ETH0_CLK_M25_DIV_WIDTH;
+	dwmac->m25_div.table = clk_25m_div_table;
+	dwmac->m25_div.hw.init = &init;
+	dwmac->m25_div.flags = CLK_DIVIDER_ALLOW_ZERO;
+
+	dwmac->m25_div_clk = devm_clk_register(dev, &dwmac->m25_div.hw);
+	if (WARN_ON(IS_ERR(dwmac->m25_div_clk)))
+		return PTR_ERR(dwmac->m25_div_clk);
+
+	return 0;
+}
+
+static int meson8b_init_prg_eth(struct meson8b_dwmac *dwmac)
+{
+	int ret;
+	unsigned long clk_rate;
+
+	switch (dwmac->phy_mode) {
+	case PHY_INTERFACE_MODE_RGMII:
+	case PHY_INTERFACE_MODE_RGMII_ID:
+	case PHY_INTERFACE_MODE_RGMII_RXID:
+	case PHY_INTERFACE_MODE_RGMII_TXID:
+		/* Generate a 25MHz clock for the PHY */
+		clk_rate = 25 * 1000 * 1000;
+
+		/* enable RGMII mode */
+		meson8b_dwmac_mask_bits(dwmac, PRG_ETH0, PRG_ETH0_RGMII_MODE,
+					PRG_ETH0_RGMII_MODE);
+
+		/* only relevant for RMII mode -> disable in RGMII mode */
+		meson8b_dwmac_mask_bits(dwmac, PRG_ETH0,
+					PRG_ETH0_INVERTED_RMII_CLK, 0);
+
+		/* TX clock delay - all known boards use a 1/4 cycle delay */
+		meson8b_dwmac_mask_bits(dwmac, PRG_ETH0, PRG_ETH0_TXDLY_MASK,
+					PRG_ETH0_TXDLY_QUARTER);
+		break;
+
+	case PHY_INTERFACE_MODE_RMII:
+		/* Use the rate of the mux clock for the internal RMII PHY */
+		clk_rate = clk_get_rate(dwmac->m250_mux_clk);
+
+		/* disable RGMII mode -> enables RMII mode */
+		meson8b_dwmac_mask_bits(dwmac, PRG_ETH0, PRG_ETH0_RGMII_MODE,
+					0);
+
+		/* invert internal clk_rmii_i to generate 25/2.5 tx_rx_clk */
+		meson8b_dwmac_mask_bits(dwmac, PRG_ETH0,
+					PRG_ETH0_INVERTED_RMII_CLK,
+					PRG_ETH0_INVERTED_RMII_CLK);
+
+		/* TX clock delay cannot be configured in RMII mode */
+		meson8b_dwmac_mask_bits(dwmac, PRG_ETH0, PRG_ETH0_TXDLY_MASK,
+					0);
+
+		break;
+
+	default:
+		dev_err(&dwmac->pdev->dev, "unsupported phy-mode %s\n",
+			phy_modes(dwmac->phy_mode));
+		return -EINVAL;
+	}
+
+	ret = clk_prepare_enable(dwmac->m25_div_clk);
+	if (ret) {
+		dev_err(&dwmac->pdev->dev, "failed to enable the PHY clock\n");
+		return ret;
+	}
+
+	ret = clk_set_rate(dwmac->m25_div_clk, clk_rate);
+	if (ret) {
+		clk_disable_unprepare(dwmac->m25_div_clk);
+
+		dev_err(&dwmac->pdev->dev, "failed to set PHY clock\n");
+		return ret;
+	}
+
+	/* enable TX_CLK and PHY_REF_CLK generator */
+	meson8b_dwmac_mask_bits(dwmac, PRG_ETH0, PRG_ETH0_TX_AND_PHY_REF_CLK,
+				PRG_ETH0_TX_AND_PHY_REF_CLK);
+
+	return 0;
+}
+
+static int meson8b_dwmac_probe(struct platform_device *pdev)
+{
+	struct plat_stmmacenet_data *plat_dat;
+	struct stmmac_resources stmmac_res;
+	struct resource *res;
+	struct meson8b_dwmac *dwmac;
+	int ret;
+
+	ret = stmmac_get_platform_resources(pdev, &stmmac_res);
+	if (ret)
+		return ret;
+
+	plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
+	if (IS_ERR(plat_dat))
+		return PTR_ERR(plat_dat);
+
+	dwmac = devm_kzalloc(&pdev->dev, sizeof(*dwmac), GFP_KERNEL);
+	if (!dwmac)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	dwmac->regs = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(dwmac->regs))
+		return PTR_ERR(dwmac->regs);
+
+	dwmac->pdev = pdev;
+	dwmac->phy_mode = of_get_phy_mode(pdev->dev.of_node);
+	if (dwmac->phy_mode < 0) {
+		dev_err(&pdev->dev, "missing phy-mode property\n");
+		return -EINVAL;
+	}
+
+	ret = meson8b_init_clk(dwmac);
+	if (ret)
+		return ret;
+
+	ret = meson8b_init_prg_eth(dwmac);
+	if (ret)
+		return ret;
+
+	plat_dat->bsp_priv = dwmac;
+
+	return stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
+}
+
+static int meson8b_dwmac_remove(struct platform_device *pdev)
+{
+	struct meson8b_dwmac *dwmac = get_stmmac_bsp_priv(&pdev->dev);
+
+	clk_disable_unprepare(dwmac->m25_div_clk);
+
+	return stmmac_pltfr_remove(pdev);
+}
+
+static const struct of_device_id meson8b_dwmac_match[] = {
+	{ .compatible = "amlogic,meson8b-dwmac" },
+	{ .compatible = "amlogic,meson-gxbb-dwmac" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, meson8b_dwmac_match);
+
+static struct platform_driver meson8b_dwmac_driver = {
+	.probe  = meson8b_dwmac_probe,
+	.remove = meson8b_dwmac_remove,
+	.driver = {
+		.name           = "meson8b-dwmac",
+		.pm		= &stmmac_pltfr_pm_ops,
+		.of_match_table = meson8b_dwmac_match,
+	},
+};
+module_platform_driver(meson8b_dwmac_driver);
+
+MODULE_AUTHOR("Martin Blumenstingl <martin.blumenstingl@googlemail.com>");
+MODULE_DESCRIPTION("Amlogic Meson8b and GXBB DWMAC glue layer");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.h b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.h
index ffeb8d9..64e147f 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.h
@@ -30,4 +30,12 @@
 int stmmac_pltfr_remove(struct platform_device *pdev);
 extern const struct dev_pm_ops stmmac_pltfr_pm_ops;
 
+static inline void *get_stmmac_bsp_priv(struct device *dev)
+{
+	struct net_device *ndev = dev_get_drvdata(dev);
+	struct stmmac_priv *priv = netdev_priv(ndev);
+
+	return priv->plat->bsp_priv;
+}
+
 #endif /* __STMMAC_PLATFORM_H__ */
diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index 2feacc7..4669c05 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -156,12 +156,14 @@
 {
 	struct nvme_ns *ns = container_of(kref, struct nvme_ns, kref);
 
-	if (ns->type == NVME_NS_LIGHTNVM)
-		nvme_nvm_unregister(ns->queue, ns->disk->disk_name);
+	if (ns->ndev)
+		nvme_nvm_unregister(ns);
 
-	spin_lock(&dev_list_lock);
-	ns->disk->private_data = NULL;
-	spin_unlock(&dev_list_lock);
+	if (ns->disk) {
+		spin_lock(&dev_list_lock);
+		ns->disk->private_data = NULL;
+		spin_unlock(&dev_list_lock);
+	}
 
 	put_disk(ns->disk);
 	ida_simple_remove(&ns->ctrl->ns_ida, ns->instance);
@@ -597,7 +599,7 @@
 }
 
 int nvme_get_features(struct nvme_ctrl *dev, unsigned fid, unsigned nsid,
-					dma_addr_t dma_addr, u32 *result)
+		      void *buffer, size_t buflen, u32 *result)
 {
 	struct nvme_command c;
 	struct nvme_completion cqe;
@@ -606,10 +608,9 @@
 	memset(&c, 0, sizeof(c));
 	c.features.opcode = nvme_admin_get_features;
 	c.features.nsid = cpu_to_le32(nsid);
-	c.features.dptr.prp1 = cpu_to_le64(dma_addr);
 	c.features.fid = cpu_to_le32(fid);
 
-	ret = __nvme_submit_sync_cmd(dev->admin_q, &c, &cqe, NULL, 0, 0,
+	ret = __nvme_submit_sync_cmd(dev->admin_q, &c, &cqe, buffer, buflen, 0,
 			NVME_QID_ANY, 0, 0);
 	if (ret >= 0 && result)
 		*result = le32_to_cpu(cqe.result);
@@ -617,7 +618,7 @@
 }
 
 int nvme_set_features(struct nvme_ctrl *dev, unsigned fid, unsigned dword11,
-					dma_addr_t dma_addr, u32 *result)
+		      void *buffer, size_t buflen, u32 *result)
 {
 	struct nvme_command c;
 	struct nvme_completion cqe;
@@ -625,12 +626,11 @@
 
 	memset(&c, 0, sizeof(c));
 	c.features.opcode = nvme_admin_set_features;
-	c.features.dptr.prp1 = cpu_to_le64(dma_addr);
 	c.features.fid = cpu_to_le32(fid);
 	c.features.dword11 = cpu_to_le32(dword11);
 
-	ret = __nvme_submit_sync_cmd(dev->admin_q, &c, &cqe, NULL, 0, 0,
-			NVME_QID_ANY, 0, 0);
+	ret = __nvme_submit_sync_cmd(dev->admin_q, &c, &cqe,
+			buffer, buflen, 0, NVME_QID_ANY, 0, 0);
 	if (ret >= 0 && result)
 		*result = le32_to_cpu(cqe.result);
 	return ret;
@@ -664,7 +664,7 @@
 	u32 result;
 	int status, nr_io_queues;
 
-	status = nvme_set_features(ctrl, NVME_FEAT_NUM_QUEUES, q_count, 0,
+	status = nvme_set_features(ctrl, NVME_FEAT_NUM_QUEUES, q_count, NULL, 0,
 			&result);
 	if (status < 0)
 		return status;
@@ -888,42 +888,32 @@
 	queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, ns->queue);
 }
 
-static int nvme_revalidate_disk(struct gendisk *disk)
+static int nvme_revalidate_ns(struct nvme_ns *ns, struct nvme_id_ns **id)
 {
-	struct nvme_ns *ns = disk->private_data;
-	struct nvme_id_ns *id;
-	u8 lbaf, pi_type;
-	u16 old_ms;
-	unsigned short bs;
-
-	if (test_bit(NVME_NS_DEAD, &ns->flags)) {
-		set_capacity(disk, 0);
-		return -ENODEV;
-	}
-	if (nvme_identify_ns(ns->ctrl, ns->ns_id, &id)) {
-		dev_warn(disk_to_dev(ns->disk), "%s: Identify failure\n",
-				__func__);
-		return -ENODEV;
-	}
-	if (id->ncap == 0) {
-		kfree(id);
+	if (nvme_identify_ns(ns->ctrl, ns->ns_id, id)) {
+		dev_warn(ns->ctrl->dev, "%s: Identify failure\n", __func__);
 		return -ENODEV;
 	}
 
-	if (nvme_nvm_ns_supported(ns, id) && ns->type != NVME_NS_LIGHTNVM) {
-		if (nvme_nvm_register(ns->queue, disk->disk_name)) {
-			dev_warn(disk_to_dev(ns->disk),
-				"%s: LightNVM init failure\n", __func__);
-			kfree(id);
-			return -ENODEV;
-		}
-		ns->type = NVME_NS_LIGHTNVM;
+	if ((*id)->ncap == 0) {
+		kfree(*id);
+		return -ENODEV;
 	}
 
 	if (ns->ctrl->vs >= NVME_VS(1, 1))
-		memcpy(ns->eui, id->eui64, sizeof(ns->eui));
+		memcpy(ns->eui, (*id)->eui64, sizeof(ns->eui));
 	if (ns->ctrl->vs >= NVME_VS(1, 2))
-		memcpy(ns->uuid, id->nguid, sizeof(ns->uuid));
+		memcpy(ns->uuid, (*id)->nguid, sizeof(ns->uuid));
+
+	return 0;
+}
+
+static void __nvme_revalidate_disk(struct gendisk *disk, struct nvme_id_ns *id)
+{
+	struct nvme_ns *ns = disk->private_data;
+	u8 lbaf, pi_type;
+	u16 old_ms;
+	unsigned short bs;
 
 	old_ms = ns->ms;
 	lbaf = id->flbas & NVME_NS_FLBAS_LBA_MASK;
@@ -962,8 +952,26 @@
 	if (ns->ctrl->oncs & NVME_CTRL_ONCS_DSM)
 		nvme_config_discard(ns);
 	blk_mq_unfreeze_queue(disk->queue);
+}
 
+static int nvme_revalidate_disk(struct gendisk *disk)
+{
+	struct nvme_ns *ns = disk->private_data;
+	struct nvme_id_ns *id = NULL;
+	int ret;
+
+	if (test_bit(NVME_NS_DEAD, &ns->flags)) {
+		set_capacity(disk, 0);
+		return -ENODEV;
+	}
+
+	ret = nvme_revalidate_ns(ns, &id);
+	if (ret)
+		return ret;
+
+	__nvme_revalidate_disk(disk, id);
 	kfree(id);
+
 	return 0;
 }
 
@@ -1425,7 +1433,7 @@
 static ssize_t wwid_show(struct device *dev, struct device_attribute *attr,
 								char *buf)
 {
-	struct nvme_ns *ns = dev_to_disk(dev)->private_data;
+	struct nvme_ns *ns = nvme_get_ns_from_dev(dev);
 	struct nvme_ctrl *ctrl = ns->ctrl;
 	int serial_len = sizeof(ctrl->serial);
 	int model_len = sizeof(ctrl->model);
@@ -1449,7 +1457,7 @@
 static ssize_t uuid_show(struct device *dev, struct device_attribute *attr,
 								char *buf)
 {
-	struct nvme_ns *ns = dev_to_disk(dev)->private_data;
+	struct nvme_ns *ns = nvme_get_ns_from_dev(dev);
 	return sprintf(buf, "%pU\n", ns->uuid);
 }
 static DEVICE_ATTR(uuid, S_IRUGO, uuid_show, NULL);
@@ -1457,7 +1465,7 @@
 static ssize_t eui_show(struct device *dev, struct device_attribute *attr,
 								char *buf)
 {
-	struct nvme_ns *ns = dev_to_disk(dev)->private_data;
+	struct nvme_ns *ns = nvme_get_ns_from_dev(dev);
 	return sprintf(buf, "%8phd\n", ns->eui);
 }
 static DEVICE_ATTR(eui, S_IRUGO, eui_show, NULL);
@@ -1465,7 +1473,7 @@
 static ssize_t nsid_show(struct device *dev, struct device_attribute *attr,
 								char *buf)
 {
-	struct nvme_ns *ns = dev_to_disk(dev)->private_data;
+	struct nvme_ns *ns = nvme_get_ns_from_dev(dev);
 	return sprintf(buf, "%d\n", ns->ns_id);
 }
 static DEVICE_ATTR(nsid, S_IRUGO, nsid_show, NULL);
@@ -1482,7 +1490,7 @@
 		struct attribute *a, int n)
 {
 	struct device *dev = container_of(kobj, struct device, kobj);
-	struct nvme_ns *ns = dev_to_disk(dev)->private_data;
+	struct nvme_ns *ns = nvme_get_ns_from_dev(dev);
 
 	if (a == &dev_attr_uuid.attr) {
 		if (!memchr_inv(ns->uuid, 0, sizeof(ns->uuid)))
@@ -1642,6 +1650,8 @@
 {
 	struct nvme_ns *ns;
 	struct gendisk *disk;
+	struct nvme_id_ns *id;
+	char disk_name[DISK_NAME_LEN];
 	int node = dev_to_node(ctrl->dev);
 
 	ns = kzalloc_node(sizeof(*ns), GFP_KERNEL, node);
@@ -1659,34 +1669,49 @@
 	ns->queue->queuedata = ns;
 	ns->ctrl = ctrl;
 
-	disk = alloc_disk_node(0, node);
-	if (!disk)
-		goto out_free_queue;
-
 	kref_init(&ns->kref);
 	ns->ns_id = nsid;
-	ns->disk = disk;
 	ns->lba_shift = 9; /* set to a default value for 512 until disk is validated */
 
-
 	blk_queue_logical_block_size(ns->queue, 1 << ns->lba_shift);
 	nvme_set_queue_limits(ctrl, ns->queue);
 
-	disk->fops = &nvme_fops;
-	disk->private_data = ns;
-	disk->queue = ns->queue;
-	disk->flags = GENHD_FL_EXT_DEVT;
-	sprintf(disk->disk_name, "nvme%dn%d", ctrl->instance, ns->instance);
+	sprintf(disk_name, "nvme%dn%d", ctrl->instance, ns->instance);
 
-	if (nvme_revalidate_disk(ns->disk))
-		goto out_free_disk;
+	if (nvme_revalidate_ns(ns, &id))
+		goto out_free_queue;
+
+	if (nvme_nvm_ns_supported(ns, id)) {
+		if (nvme_nvm_register(ns, disk_name, node,
+							&nvme_ns_attr_group)) {
+			dev_warn(ctrl->dev, "%s: LightNVM init failure\n",
+								__func__);
+			goto out_free_id;
+		}
+	} else {
+		disk = alloc_disk_node(0, node);
+		if (!disk)
+			goto out_free_id;
+
+		disk->fops = &nvme_fops;
+		disk->private_data = ns;
+		disk->queue = ns->queue;
+		disk->flags = GENHD_FL_EXT_DEVT;
+		memcpy(disk->disk_name, disk_name, DISK_NAME_LEN);
+		ns->disk = disk;
+
+		__nvme_revalidate_disk(disk, id);
+	}
 
 	mutex_lock(&ctrl->namespaces_mutex);
 	list_add_tail(&ns->list, &ctrl->namespaces);
 	mutex_unlock(&ctrl->namespaces_mutex);
 
 	kref_get(&ctrl->kref);
-	if (ns->type == NVME_NS_LIGHTNVM)
+
+	kfree(id);
+
+	if (ns->ndev)
 		return;
 
 	device_add_disk(ctrl->device, ns->disk);
@@ -1695,8 +1720,8 @@
 		pr_warn("%s: failed to create sysfs group for identification\n",
 			ns->disk->disk_name);
 	return;
- out_free_disk:
-	kfree(disk);
+ out_free_id:
+	kfree(id);
  out_free_queue:
 	blk_cleanup_queue(ns->queue);
  out_release_instance:
@@ -1710,7 +1735,7 @@
 	if (test_and_set_bit(NVME_NS_REMOVING, &ns->flags))
 		return;
 
-	if (ns->disk->flags & GENHD_FL_UP) {
+	if (ns->disk && ns->disk->flags & GENHD_FL_UP) {
 		if (blk_get_integrity(ns->disk))
 			blk_integrity_unregister(ns->disk);
 		sysfs_remove_group(&disk_to_dev(ns->disk)->kobj,
@@ -1733,7 +1758,7 @@
 
 	ns = nvme_find_get_ns(ctrl, nsid);
 	if (ns) {
-		if (revalidate_disk(ns->disk))
+		if (ns->disk && revalidate_disk(ns->disk))
 			nvme_ns_remove(ns);
 		nvme_put_ns(ns);
 	} else
@@ -2038,7 +2063,7 @@
 		 * Revalidating a dead namespace sets capacity to 0. This will
 		 * end buffered writers dirtying pages that can't be synced.
 		 */
-		if (!test_and_set_bit(NVME_NS_DEAD, &ns->flags))
+		if (ns->disk && !test_and_set_bit(NVME_NS_DEAD, &ns->flags))
 			revalidate_disk(ns->disk);
 
 		blk_set_queue_dying(ns->queue);
diff --git a/drivers/nvme/host/fabrics.c b/drivers/nvme/host/fabrics.c
index 4eff491..5a3f008 100644
--- a/drivers/nvme/host/fabrics.c
+++ b/drivers/nvme/host/fabrics.c
@@ -111,8 +111,19 @@
  */
 int nvmf_get_address(struct nvme_ctrl *ctrl, char *buf, int size)
 {
-	return snprintf(buf, size, "traddr=%s,trsvcid=%s\n",
-			ctrl->opts->traddr, ctrl->opts->trsvcid);
+	int len = 0;
+
+	if (ctrl->opts->mask & NVMF_OPT_TRADDR)
+		len += snprintf(buf, size, "traddr=%s", ctrl->opts->traddr);
+	if (ctrl->opts->mask & NVMF_OPT_TRSVCID)
+		len += snprintf(buf + len, size - len, "%strsvcid=%s",
+				(len) ? "," : "", ctrl->opts->trsvcid);
+	if (ctrl->opts->mask & NVMF_OPT_HOST_TRADDR)
+		len += snprintf(buf + len, size - len, "%shost_traddr=%s",
+				(len) ? "," : "", ctrl->opts->host_traddr);
+	len += snprintf(buf + len, size - len, "\n");
+
+	return len;
 }
 EXPORT_SYMBOL_GPL(nvmf_get_address);
 
@@ -519,6 +530,7 @@
 	{ NVMF_OPT_RECONNECT_DELAY,	"reconnect_delay=%d"	},
 	{ NVMF_OPT_KATO,		"keep_alive_tmo=%d"	},
 	{ NVMF_OPT_HOSTNQN,		"hostnqn=%s"		},
+	{ NVMF_OPT_HOST_TRADDR,		"host_traddr=%s"	},
 	{ NVMF_OPT_ERR,			NULL			}
 };
 
@@ -675,6 +687,14 @@
 			}
 			opts->reconnect_delay = token;
 			break;
+		case NVMF_OPT_HOST_TRADDR:
+			p = match_strdup(args);
+			if (!p) {
+				ret = -ENOMEM;
+				goto out;
+			}
+			opts->host_traddr = p;
+			break;
 		default:
 			pr_warn("unknown parameter or missing value '%s' in ctrl creation request\n",
 				p);
@@ -741,6 +761,7 @@
 	kfree(opts->traddr);
 	kfree(opts->trsvcid);
 	kfree(opts->subsysnqn);
+	kfree(opts->host_traddr);
 	kfree(opts);
 }
 EXPORT_SYMBOL_GPL(nvmf_free_options);
diff --git a/drivers/nvme/host/fabrics.h b/drivers/nvme/host/fabrics.h
index 46e460a..924145c9 100644
--- a/drivers/nvme/host/fabrics.h
+++ b/drivers/nvme/host/fabrics.h
@@ -52,6 +52,7 @@
 	NVMF_OPT_KATO		= 1 << 7,
 	NVMF_OPT_HOSTNQN	= 1 << 8,
 	NVMF_OPT_RECONNECT_DELAY = 1 << 9,
+	NVMF_OPT_HOST_TRADDR	= 1 << 10,
 };
 
 /**
@@ -64,9 +65,12 @@
  *		being added.
  * @subsysnqn:	Hold the fully qualified NQN subystem name (format defined
  *		in the NVMe specification, "NVMe Qualified Names").
- * @traddr:	network address that will be used by the host to communicate
- *		to the added NVMe controller.
- * @trsvcid:	network port used for host-controller communication.
+ * @traddr:	The transport-specific TRADDR field for a port on the
+ *              subsystem which is adding a controller.
+ * @trsvcid:	The transport-specific TRSVCID field for a port on the
+ *              subsystem which is adding a controller.
+ * @host_traddr: A transport-specific field identifying the NVME host port
+ *              to use for the connection to the controller.
  * @queue_size: Number of IO queue elements.
  * @nr_io_queues: Number of controller IO queues that will be established.
  * @reconnect_delay: Time between two consecutive reconnect attempts.
@@ -80,6 +84,7 @@
 	char			*subsysnqn;
 	char			*traddr;
 	char			*trsvcid;
+	char			*host_traddr;
 	size_t			queue_size;
 	unsigned int		nr_io_queues;
 	unsigned int		reconnect_delay;
diff --git a/drivers/nvme/host/lightnvm.c b/drivers/nvme/host/lightnvm.c
index 63f483d..f5e3011 100644
--- a/drivers/nvme/host/lightnvm.c
+++ b/drivers/nvme/host/lightnvm.c
@@ -475,7 +475,7 @@
 
 	if (rqd->opcode == NVM_OP_HBWRITE || rqd->opcode == NVM_OP_HBREAD)
 		c->hb_rw.slba = cpu_to_le64(nvme_block_nr(ns,
-						rqd->bio->bi_iter.bi_sector));
+					rqd->bio->bi_iter.bi_sector));
 }
 
 static void nvme_nvm_end_io(struct request *rq, int error)
@@ -592,14 +592,37 @@
 	.max_phys_sect		= 64,
 };
 
-int nvme_nvm_register(struct request_queue *q, char *disk_name)
+int nvme_nvm_register(struct nvme_ns *ns, char *disk_name, int node,
+		      const struct attribute_group *attrs)
 {
-	return nvm_register(q, disk_name, &nvme_nvm_dev_ops);
+	struct request_queue *q = ns->queue;
+	struct nvm_dev *dev;
+	int ret;
+
+	dev = nvm_alloc_dev(node);
+	if (!dev)
+		return -ENOMEM;
+
+	dev->q = q;
+	memcpy(dev->name, disk_name, DISK_NAME_LEN);
+	dev->ops = &nvme_nvm_dev_ops;
+	dev->parent_dev = ns->ctrl->device;
+	dev->private_data = ns;
+	ns->ndev = dev;
+
+	ret = nvm_register(dev);
+
+	ns->lba_shift = ilog2(dev->sec_size) - 9;
+
+	if (sysfs_create_group(&dev->dev.kobj, attrs))
+		pr_warn("%s: failed to create sysfs group for identification\n",
+			disk_name);
+	return ret;
 }
 
-void nvme_nvm_unregister(struct request_queue *q, char *disk_name)
+void nvme_nvm_unregister(struct nvme_ns *ns)
 {
-	nvm_unregister(disk_name);
+	nvm_unregister(ns->ndev);
 }
 
 /* move to shared place when used in multiple places. */
diff --git a/drivers/nvme/host/nvme.h b/drivers/nvme/host/nvme.h
index ab18b781..b0a9ec6 100644
--- a/drivers/nvme/host/nvme.h
+++ b/drivers/nvme/host/nvme.h
@@ -18,6 +18,7 @@
 #include <linux/pci.h>
 #include <linux/kref.h>
 #include <linux/blk-mq.h>
+#include <linux/lightnvm.h>
 
 enum {
 	/*
@@ -154,6 +155,7 @@
 	struct nvme_ctrl *ctrl;
 	struct request_queue *queue;
 	struct gendisk *disk;
+	struct nvm_dev *ndev;
 	struct kref kref;
 	int instance;
 
@@ -165,7 +167,6 @@
 	u16 ms;
 	bool ext;
 	u8 pi_type;
-	int type;
 	unsigned long flags;
 
 #define NVME_NS_REMOVING 0
@@ -292,9 +293,9 @@
 		struct nvme_id_ns **id);
 int nvme_get_log_page(struct nvme_ctrl *dev, struct nvme_smart_log **log);
 int nvme_get_features(struct nvme_ctrl *dev, unsigned fid, unsigned nsid,
-			dma_addr_t dma_addr, u32 *result);
+		      void *buffer, size_t buflen, u32 *result);
 int nvme_set_features(struct nvme_ctrl *dev, unsigned fid, unsigned dword11,
-			dma_addr_t dma_addr, u32 *result);
+		      void *buffer, size_t buflen, u32 *result);
 int nvme_set_queue_count(struct nvme_ctrl *ctrl, int *count);
 void nvme_start_keep_alive(struct nvme_ctrl *ctrl);
 void nvme_stop_keep_alive(struct nvme_ctrl *ctrl);
@@ -307,20 +308,35 @@
 
 #ifdef CONFIG_NVM
 int nvme_nvm_ns_supported(struct nvme_ns *ns, struct nvme_id_ns *id);
-int nvme_nvm_register(struct request_queue *q, char *disk_name);
-void nvme_nvm_unregister(struct request_queue *q, char *disk_name);
+int nvme_nvm_register(struct nvme_ns *ns, char *disk_name, int node,
+		      const struct attribute_group *attrs);
+void nvme_nvm_unregister(struct nvme_ns *ns);
+
+static inline struct nvme_ns *nvme_get_ns_from_dev(struct device *dev)
+{
+	if (dev->type->devnode)
+		return dev_to_disk(dev)->private_data;
+
+	return (container_of(dev, struct nvm_dev, dev))->private_data;
+}
 #else
-static inline int nvme_nvm_register(struct request_queue *q, char *disk_name)
+static inline int nvme_nvm_register(struct nvme_ns *ns, char *disk_name,
+				    int node,
+				    const struct attribute_group *attrs)
 {
 	return 0;
 }
 
-static inline void nvme_nvm_unregister(struct request_queue *q, char *disk_name) {};
+static inline void nvme_nvm_unregister(struct nvme_ns *ns) {};
 
 static inline int nvme_nvm_ns_supported(struct nvme_ns *ns, struct nvme_id_ns *id)
 {
 	return 0;
 }
+static inline struct nvme_ns *nvme_get_ns_from_dev(struct device *dev)
+{
+	return dev_to_disk(dev)->private_data;
+}
 #endif /* CONFIG_NVM */
 
 int __init nvme_core_init(void);
diff --git a/drivers/nvme/host/scsi.c b/drivers/nvme/host/scsi.c
index e947e29..c2a0a1c7 100644
--- a/drivers/nvme/host/scsi.c
+++ b/drivers/nvme/host/scsi.c
@@ -72,15 +72,6 @@
 #define ALL_LUNS_RETURNED				0x02
 #define ALL_WELL_KNOWN_LUNS_RETURNED			0x01
 #define RESTRICTED_LUNS_RETURNED			0x00
-#define NVME_POWER_STATE_START_VALID			0x00
-#define NVME_POWER_STATE_ACTIVE				0x01
-#define NVME_POWER_STATE_IDLE				0x02
-#define NVME_POWER_STATE_STANDBY			0x03
-#define NVME_POWER_STATE_LU_CONTROL			0x07
-#define POWER_STATE_0					0
-#define POWER_STATE_1					1
-#define POWER_STATE_2					2
-#define POWER_STATE_3					3
 #define DOWNLOAD_SAVE_ACTIVATE				0x05
 #define DOWNLOAD_SAVE_DEFER_ACTIVATE			0x0E
 #define ACTIVATE_DEFERRED_MICROCODE			0x0F
@@ -915,7 +906,7 @@
 	kfree(smart_log);
 
 	/* Get Features for Temp Threshold */
-	res = nvme_get_features(ns->ctrl, NVME_FEAT_TEMP_THRESH, 0, 0,
+	res = nvme_get_features(ns->ctrl, NVME_FEAT_TEMP_THRESH, 0, NULL, 0,
 								&feature_resp);
 	if (res != NVME_SC_SUCCESS)
 		temp_c_thresh = LOG_TEMP_UNKNOWN;
@@ -1048,7 +1039,7 @@
 	if (len < MODE_PAGE_CACHING_LEN)
 		return -EINVAL;
 
-	nvme_sc = nvme_get_features(ns->ctrl, NVME_FEAT_VOLATILE_WC, 0, 0,
+	nvme_sc = nvme_get_features(ns->ctrl, NVME_FEAT_VOLATILE_WC, 0, NULL, 0,
 								&feature_resp);
 	res = nvme_trans_status_code(hdr, nvme_sc);
 	if (res)
@@ -1229,64 +1220,6 @@
 
 /* Start Stop Unit Helper Functions */
 
-static int nvme_trans_power_state(struct nvme_ns *ns, struct sg_io_hdr *hdr,
-						u8 pc, u8 pcmod, u8 start)
-{
-	int res;
-	int nvme_sc;
-	struct nvme_id_ctrl *id_ctrl;
-	int lowest_pow_st;	/* max npss = lowest power consumption */
-	unsigned ps_desired = 0;
-
-	nvme_sc = nvme_identify_ctrl(ns->ctrl, &id_ctrl);
-	res = nvme_trans_status_code(hdr, nvme_sc);
-	if (res)
-		return res;
-
-	lowest_pow_st = max(POWER_STATE_0, (int)(id_ctrl->npss - 1));
-	kfree(id_ctrl);
-
-	switch (pc) {
-	case NVME_POWER_STATE_START_VALID:
-		/* Action unspecified if POWER CONDITION MODIFIER != 0 */
-		if (pcmod == 0 && start == 0x1)
-			ps_desired = POWER_STATE_0;
-		if (pcmod == 0 && start == 0x0)
-			ps_desired = lowest_pow_st;
-		break;
-	case NVME_POWER_STATE_ACTIVE:
-		/* Action unspecified if POWER CONDITION MODIFIER != 0 */
-		if (pcmod == 0)
-			ps_desired = POWER_STATE_0;
-		break;
-	case NVME_POWER_STATE_IDLE:
-		/* Action unspecified if POWER CONDITION MODIFIER != [0,1,2] */
-		if (pcmod == 0x0)
-			ps_desired = POWER_STATE_1;
-		else if (pcmod == 0x1)
-			ps_desired = POWER_STATE_2;
-		else if (pcmod == 0x2)
-			ps_desired = POWER_STATE_3;
-		break;
-	case NVME_POWER_STATE_STANDBY:
-		/* Action unspecified if POWER CONDITION MODIFIER != [0,1] */
-		if (pcmod == 0x0)
-			ps_desired = max(POWER_STATE_0, (lowest_pow_st - 2));
-		else if (pcmod == 0x1)
-			ps_desired = max(POWER_STATE_0, (lowest_pow_st - 1));
-		break;
-	case NVME_POWER_STATE_LU_CONTROL:
-	default:
-		res = nvme_trans_completion(hdr, SAM_STAT_CHECK_CONDITION,
-				ILLEGAL_REQUEST, SCSI_ASC_INVALID_CDB,
-				SCSI_ASCQ_CAUSE_NOT_REPORTABLE);
-		break;
-	}
-	nvme_sc = nvme_set_features(ns->ctrl, NVME_FEAT_POWER_MGMT, ps_desired, 0,
-				    NULL);
-	return nvme_trans_status_code(hdr, nvme_sc);
-}
-
 static int nvme_trans_send_activate_fw_cmd(struct nvme_ns *ns, struct sg_io_hdr *hdr,
 					u8 buffer_id)
 {
@@ -1395,7 +1328,7 @@
 	case MODE_PAGE_CACHING:
 		dword11 = ((mode_page[2] & CACHING_MODE_PAGE_WCE_MASK) ? 1 : 0);
 		nvme_sc = nvme_set_features(ns->ctrl, NVME_FEAT_VOLATILE_WC,
-					    dword11, 0, NULL);
+					    dword11, NULL, 0, NULL);
 		res = nvme_trans_status_code(hdr, nvme_sc);
 		break;
 	case MODE_PAGE_CONTROL:
@@ -2235,11 +2168,10 @@
 static int nvme_trans_start_stop(struct nvme_ns *ns, struct sg_io_hdr *hdr,
 							u8 *cmd)
 {
-	u8 immed, pcmod, pc, no_flush, start;
+	u8 immed, pcmod, no_flush, start;
 
 	immed = cmd[1] & 0x01;
 	pcmod = cmd[3] & 0x0f;
-	pc = (cmd[4] & 0xf0) >> 4;
 	no_flush = cmd[4] & 0x04;
 	start = cmd[4] & 0x01;
 
@@ -2254,8 +2186,8 @@
 			if (res)
 				return res;
 		}
-		/* Setup the expected power state transition */
-		return nvme_trans_power_state(ns, hdr, pc, pcmod, start);
+
+		return 0;
 	}
 }
 
diff --git a/drivers/nvme/target/admin-cmd.c b/drivers/nvme/target/admin-cmd.c
index 47c564b..7ab9c93 100644
--- a/drivers/nvme/target/admin-cmd.c
+++ b/drivers/nvme/target/admin-cmd.c
@@ -14,6 +14,7 @@
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 #include <linux/module.h>
 #include <generated/utsrelease.h>
+#include <asm/unaligned.h>
 #include "nvmet.h"
 
 u32 nvmet_get_log_page_len(struct nvme_command *cmd)
@@ -29,8 +30,84 @@
 	return len;
 }
 
+static u16 nvmet_get_smart_log_nsid(struct nvmet_req *req,
+		struct nvme_smart_log *slog)
+{
+	u16 status;
+	struct nvmet_ns *ns;
+	u64 host_reads, host_writes, data_units_read, data_units_written;
+
+	status = NVME_SC_SUCCESS;
+	ns = nvmet_find_namespace(req->sq->ctrl, req->cmd->get_log_page.nsid);
+	if (!ns) {
+		status = NVME_SC_INVALID_NS;
+		pr_err("nvmet : Counld not find namespace id : %d\n",
+				le32_to_cpu(req->cmd->get_log_page.nsid));
+		goto out;
+	}
+
+	host_reads = part_stat_read(ns->bdev->bd_part, ios[READ]);
+	data_units_read = part_stat_read(ns->bdev->bd_part, sectors[READ]);
+	host_writes = part_stat_read(ns->bdev->bd_part, ios[WRITE]);
+	data_units_written = part_stat_read(ns->bdev->bd_part, sectors[WRITE]);
+
+	put_unaligned_le64(host_reads, &slog->host_reads[0]);
+	put_unaligned_le64(data_units_read, &slog->data_units_read[0]);
+	put_unaligned_le64(host_writes, &slog->host_writes[0]);
+	put_unaligned_le64(data_units_written, &slog->data_units_written[0]);
+	nvmet_put_namespace(ns);
+out:
+	return status;
+}
+
+static u16 nvmet_get_smart_log_all(struct nvmet_req *req,
+		struct nvme_smart_log *slog)
+{
+	u16 status;
+	u64 host_reads = 0, host_writes = 0;
+	u64 data_units_read = 0, data_units_written = 0;
+	struct nvmet_ns *ns;
+	struct nvmet_ctrl *ctrl;
+
+	status = NVME_SC_SUCCESS;
+	ctrl = req->sq->ctrl;
+
+	rcu_read_lock();
+	list_for_each_entry_rcu(ns, &ctrl->subsys->namespaces, dev_link) {
+		host_reads += part_stat_read(ns->bdev->bd_part, ios[READ]);
+		data_units_read +=
+			part_stat_read(ns->bdev->bd_part, sectors[READ]);
+		host_writes += part_stat_read(ns->bdev->bd_part, ios[WRITE]);
+		data_units_written +=
+			part_stat_read(ns->bdev->bd_part, sectors[WRITE]);
+
+	}
+	rcu_read_unlock();
+
+	put_unaligned_le64(host_reads, &slog->host_reads[0]);
+	put_unaligned_le64(data_units_read, &slog->data_units_read[0]);
+	put_unaligned_le64(host_writes, &slog->host_writes[0]);
+	put_unaligned_le64(data_units_written, &slog->data_units_written[0]);
+
+	return status;
+}
+
+static u16 nvmet_get_smart_log(struct nvmet_req *req,
+		struct nvme_smart_log *slog)
+{
+	u16 status;
+
+	WARN_ON(req == NULL || slog == NULL);
+	if (req->cmd->get_log_page.nsid == 0xFFFFFFFF)
+		status = nvmet_get_smart_log_all(req, slog);
+	else
+		status = nvmet_get_smart_log_nsid(req, slog);
+	return status;
+}
+
 static void nvmet_execute_get_log_page(struct nvmet_req *req)
 {
+	struct nvme_smart_log *smart_log;
 	size_t data_len = nvmet_get_log_page_len(req->cmd);
 	void *buf;
 	u16 status = 0;
@@ -59,6 +136,16 @@
 		 * available (e.g. units or commands read/written) those aren't
 		 * persistent over power loss.
 		 */
+		if (data_len != sizeof(*smart_log)) {
+			status = NVME_SC_INTERNAL;
+			goto err;
+		}
+		smart_log = buf;
+		status = nvmet_get_smart_log(req, smart_log);
+		if (status) {
+			memset(buf, '\0', data_len);
+			goto err;
+		}
 		break;
 	case 0x03:
 		/*
@@ -73,6 +160,7 @@
 
 	status = nvmet_copy_to_sgl(req, 0, buf, data_len);
 
+err:
 	kfree(buf);
 out:
 	nvmet_req_complete(req, status);
diff --git a/drivers/nvme/target/io-cmd.c b/drivers/nvme/target/io-cmd.c
index 2cd069b6..4a96c20 100644
--- a/drivers/nvme/target/io-cmd.c
+++ b/drivers/nvme/target/io-cmd.c
@@ -58,6 +58,7 @@
 
 	if (req->cmd->rw.opcode == nvme_cmd_write) {
 		op = REQ_OP_WRITE;
+		op_flags = WRITE_ODIRECT;
 		if (req->cmd->rw.control & cpu_to_le16(NVME_RW_FUA))
 			op_flags |= REQ_FUA;
 	} else {
@@ -205,7 +206,7 @@
 		return 0;
 	case nvme_cmd_dsm:
 		req->execute = nvmet_execute_dsm;
-		req->data_len = le32_to_cpu(cmd->dsm.nr) *
+		req->data_len = le32_to_cpu(cmd->dsm.nr + 1) *
 			sizeof(struct nvme_dsm_range);
 		return 0;
 	default:
diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig
index f550c45..ba140ea 100644
--- a/drivers/nvmem/Kconfig
+++ b/drivers/nvmem/Kconfig
@@ -101,4 +101,14 @@
 	  This driver can also be build as a module. If so, the module will
 	  be called nvmem-vf610-ocotp.
 
+config MESON_EFUSE
+	tristate "Amlogic eFuse Support"
+	depends on (ARCH_MESON || COMPILE_TEST) && MESON_SM
+	help
+	  This is a driver to retrieve specific values from the eFuse found on
+	  the Amlogic Meson SoCs.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called nvmem_meson_efuse.
+
 endif
diff --git a/drivers/nvmem/Makefile b/drivers/nvmem/Makefile
index 45ab1ae..8f942a0 100644
--- a/drivers/nvmem/Makefile
+++ b/drivers/nvmem/Makefile
@@ -22,3 +22,5 @@
 nvmem_sunxi_sid-y		:= sunxi_sid.o
 obj-$(CONFIG_NVMEM_VF610_OCOTP)	+= nvmem-vf610-ocotp.o
 nvmem-vf610-ocotp-y		:= vf610-ocotp.o
+obj-$(CONFIG_MESON_EFUSE)	+= nvmem_meson_efuse.o
+nvmem_meson_efuse-y		:= meson-efuse.o
diff --git a/drivers/nvmem/meson-efuse.c b/drivers/nvmem/meson-efuse.c
new file mode 100644
index 0000000..f207c3b
--- /dev/null
+++ b/drivers/nvmem/meson-efuse.c
@@ -0,0 +1,93 @@
+/*
+ * Amlogic eFuse Driver
+ *
+ * Copyright (c) 2016 Endless Computers, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+#include <linux/firmware/meson/meson_sm.h>
+
+static int meson_efuse_read(void *context, unsigned int offset,
+			    void *val, size_t bytes)
+{
+	u8 *buf = val;
+	int ret;
+
+	ret = meson_sm_call_read(buf, SM_EFUSE_READ, offset,
+				 bytes, 0, 0, 0);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static struct nvmem_config econfig = {
+	.name = "meson-efuse",
+	.owner = THIS_MODULE,
+	.stride = 1,
+	.word_size = 1,
+	.read_only = true,
+};
+
+static const struct of_device_id meson_efuse_match[] = {
+	{ .compatible = "amlogic,meson-gxbb-efuse", },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, meson_efuse_match);
+
+static int meson_efuse_probe(struct platform_device *pdev)
+{
+	struct nvmem_device *nvmem;
+	unsigned int size;
+
+	if (meson_sm_call(SM_EFUSE_USER_MAX, &size, 0, 0, 0, 0, 0) < 0)
+		return -EINVAL;
+
+	econfig.dev = &pdev->dev;
+	econfig.reg_read = meson_efuse_read;
+	econfig.size = size;
+
+	nvmem = nvmem_register(&econfig);
+	if (IS_ERR(nvmem))
+		return PTR_ERR(nvmem);
+
+	platform_set_drvdata(pdev, nvmem);
+
+	return 0;
+}
+
+static int meson_efuse_remove(struct platform_device *pdev)
+{
+	struct nvmem_device *nvmem = platform_get_drvdata(pdev);
+
+	return nvmem_unregister(nvmem);
+}
+
+static struct platform_driver meson_efuse_driver = {
+	.probe = meson_efuse_probe,
+	.remove = meson_efuse_remove,
+	.driver = {
+		.name = "meson-efuse",
+		.of_match_table = meson_efuse_match,
+	},
+};
+
+module_platform_driver(meson_efuse_driver);
+
+MODULE_AUTHOR("Carlo Caione <carlo@endlessm.com>");
+MODULE_DESCRIPTION("Amlogic Meson NVMEM driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pci/hotplug/pnv_php.c b/drivers/pci/hotplug/pnv_php.c
index e6245b0..56efaf7 100644
--- a/drivers/pci/hotplug/pnv_php.c
+++ b/drivers/pci/hotplug/pnv_php.c
@@ -22,6 +22,12 @@
 #define DRIVER_AUTHOR	"Gavin Shan, IBM Corporation"
 #define DRIVER_DESC	"PowerPC PowerNV PCI Hotplug Driver"
 
+struct pnv_php_event {
+	bool			added;
+	struct pnv_php_slot	*php_slot;
+	struct work_struct	work;
+};
+
 static LIST_HEAD(pnv_php_slot_list);
 static DEFINE_SPINLOCK(pnv_php_lock);
 
@@ -29,12 +35,40 @@
 static void pnv_php_unregister_one(struct device_node *dn);
 static void pnv_php_unregister(struct device_node *dn);
 
+static void pnv_php_disable_irq(struct pnv_php_slot *php_slot)
+{
+	struct pci_dev *pdev = php_slot->pdev;
+	u16 ctrl;
+
+	if (php_slot->irq > 0) {
+		pcie_capability_read_word(pdev, PCI_EXP_SLTCTL, &ctrl);
+		ctrl &= ~(PCI_EXP_SLTCTL_HPIE |
+			  PCI_EXP_SLTCTL_PDCE |
+			  PCI_EXP_SLTCTL_DLLSCE);
+		pcie_capability_write_word(pdev, PCI_EXP_SLTCTL, ctrl);
+
+		free_irq(php_slot->irq, php_slot);
+		php_slot->irq = 0;
+	}
+
+	if (php_slot->wq) {
+		destroy_workqueue(php_slot->wq);
+		php_slot->wq = NULL;
+	}
+
+	if (pdev->msix_enabled)
+		pci_disable_msix(pdev);
+	else if (pdev->msi_enabled)
+		pci_disable_msi(pdev);
+}
+
 static void pnv_php_free_slot(struct kref *kref)
 {
 	struct pnv_php_slot *php_slot = container_of(kref,
 					struct pnv_php_slot, kref);
 
 	WARN_ON(!list_empty(&php_slot->children));
+	pnv_php_disable_irq(php_slot);
 	kfree(php_slot->name);
 	kfree(php_slot);
 }
@@ -122,7 +156,7 @@
 
 		of_node_put(dn);
 		refcount = atomic_read(&dn->kobj.kref.refcount);
-		if (unlikely(refcount != 1))
+		if (refcount != 1)
 			pr_warn("Invalid refcount %d on <%s>\n",
 				refcount, of_node_full_name(dn));
 
@@ -184,11 +218,11 @@
 
 	for_each_child_of_node(dn, child) {
 		ret = of_changeset_attach_node(ocs, child);
-		if (unlikely(ret))
+		if (ret)
 			break;
 
 		ret = pnv_php_populate_changeset(ocs, child);
-		if (unlikely(ret))
+		if (ret)
 			break;
 	}
 
@@ -201,7 +235,7 @@
 	struct pci_dn *pdn;
 
 	pdn = pci_add_device_node_info(hose, dn);
-	if (unlikely(!pdn))
+	if (!pdn)
 		return ERR_PTR(-ENOMEM);
 
 	return NULL;
@@ -224,21 +258,21 @@
 	 * fits the real size.
 	 */
 	fdt1 = kzalloc(0x10000, GFP_KERNEL);
-	if (unlikely(!fdt1)) {
+	if (!fdt1) {
 		ret = -ENOMEM;
 		dev_warn(&php_slot->pdev->dev, "Cannot alloc FDT blob\n");
 		goto out;
 	}
 
 	ret = pnv_pci_get_device_tree(php_slot->dn->phandle, fdt1, 0x10000);
-	if (unlikely(ret)) {
+	if (ret) {
 		dev_warn(&php_slot->pdev->dev, "Error %d getting FDT blob\n",
 			 ret);
 		goto free_fdt1;
 	}
 
 	fdt = kzalloc(fdt_totalsize(fdt1), GFP_KERNEL);
-	if (unlikely(!fdt)) {
+	if (!fdt) {
 		ret = -ENOMEM;
 		dev_warn(&php_slot->pdev->dev, "Cannot %d bytes memory\n",
 			 fdt_totalsize(fdt1));
@@ -248,7 +282,7 @@
 	/* Unflatten device tree blob */
 	memcpy(fdt, fdt1, fdt_totalsize(fdt1));
 	dt = of_fdt_unflatten_tree(fdt, php_slot->dn, NULL);
-	if (unlikely(!dt)) {
+	if (!dt) {
 		ret = -EINVAL;
 		dev_warn(&php_slot->pdev->dev, "Cannot unflatten FDT\n");
 		goto free_fdt;
@@ -258,7 +292,7 @@
 	of_changeset_init(&php_slot->ocs);
 	pnv_php_reverse_nodes(php_slot->dn);
 	ret = pnv_php_populate_changeset(&php_slot->ocs, php_slot->dn);
-	if (unlikely(ret)) {
+	if (ret) {
 		pnv_php_reverse_nodes(php_slot->dn);
 		dev_warn(&php_slot->pdev->dev, "Error %d populating changeset\n",
 			 ret);
@@ -267,7 +301,7 @@
 
 	php_slot->dn->child = NULL;
 	ret = of_changeset_apply(&php_slot->ocs);
-	if (unlikely(ret)) {
+	if (ret) {
 		dev_warn(&php_slot->pdev->dev, "Error %d applying changeset\n",
 			 ret);
 		goto destroy_changeset;
@@ -301,7 +335,7 @@
 	int ret;
 
 	ret = pnv_pci_set_power_state(php_slot->id, state, &msg);
-	if (likely(ret > 0)) {
+	if (ret > 0) {
 		if (be64_to_cpu(msg.params[1]) != php_slot->dn->phandle	||
 		    be64_to_cpu(msg.params[2]) != state			||
 		    be64_to_cpu(msg.params[3]) != OPAL_SUCCESS) {
@@ -311,7 +345,7 @@
 				 be64_to_cpu(msg.params[3]));
 			return -ENOMSG;
 		}
-	} else if (unlikely(ret < 0)) {
+	} else if (ret < 0) {
 		dev_warn(&php_slot->pdev->dev, "Error %d powering %s\n",
 			 ret, (state == OPAL_PCI_SLOT_POWER_ON) ? "on" : "off");
 		return ret;
@@ -338,7 +372,7 @@
 	 * be on.
 	 */
 	ret = pnv_pci_get_power_state(php_slot->id, &power_state);
-	if (unlikely(ret)) {
+	if (ret) {
 		dev_warn(&php_slot->pdev->dev, "Error %d getting power status\n",
 			 ret);
 	} else {
@@ -360,7 +394,7 @@
 	 * get that, it will fail back to be empty.
 	 */
 	ret = pnv_pci_get_presence_state(php_slot->id, &presence);
-	if (likely(ret >= 0)) {
+	if (ret >= 0) {
 		*state = presence;
 		slot->info->adapter_status = presence;
 		ret = 0;
@@ -393,7 +427,7 @@
 
 	/* Retrieve slot presence status */
 	ret = pnv_php_get_adapter_state(slot, &presence);
-	if (unlikely(ret))
+	if (ret)
 		return ret;
 
 	/* Proceed if there have nothing behind the slot */
@@ -414,7 +448,7 @@
 		php_slot->power_state_check = true;
 
 		ret = pnv_php_get_power_state(slot, &power_status);
-		if (unlikely(ret))
+		if (ret)
 			return ret;
 
 		if (power_status != OPAL_PCI_SLOT_POWER_ON)
@@ -423,7 +457,7 @@
 
 	/* Check the power status. Scan the slot if it is already on */
 	ret = pnv_php_get_power_state(slot, &power_status);
-	if (unlikely(ret))
+	if (ret)
 		return ret;
 
 	if (power_status == OPAL_PCI_SLOT_POWER_ON)
@@ -431,7 +465,7 @@
 
 	/* Power is off, turn it on and then scan the slot */
 	ret = pnv_php_set_slot_power_state(slot, OPAL_PCI_SLOT_POWER_ON);
-	if (unlikely(ret))
+	if (ret)
 		return ret;
 
 scan:
@@ -513,29 +547,30 @@
 	struct pci_bus *bus;
 	const char *label;
 	uint64_t id;
+	int ret;
 
-	label = of_get_property(dn, "ibm,slot-label", NULL);
-	if (unlikely(!label))
+	ret = of_property_read_string(dn, "ibm,slot-label", &label);
+	if (ret)
 		return NULL;
 
 	if (pnv_pci_get_slot_id(dn, &id))
 		return NULL;
 
 	bus = pci_find_bus_by_node(dn);
-	if (unlikely(!bus))
+	if (!bus)
 		return NULL;
 
 	php_slot = kzalloc(sizeof(*php_slot), GFP_KERNEL);
-	if (unlikely(!php_slot))
+	if (!php_slot)
 		return NULL;
 
 	php_slot->name = kstrdup(label, GFP_KERNEL);
-	if (unlikely(!php_slot->name)) {
+	if (!php_slot->name) {
 		kfree(php_slot);
 		return NULL;
 	}
 
-	if (likely(dn->child && PCI_DN(dn->child)))
+	if (dn->child && PCI_DN(dn->child))
 		php_slot->slot_no = PCI_SLOT(PCI_DN(dn->child)->devfn);
 	else
 		php_slot->slot_no = -1;   /* Placeholder slot */
@@ -567,7 +602,7 @@
 
 	/* Check if the slot is registered or not */
 	parent = pnv_php_find_slot(php_slot->dn);
-	if (unlikely(parent)) {
+	if (parent) {
 		pnv_php_put_slot(parent);
 		return -EEXIST;
 	}
@@ -575,7 +610,7 @@
 	/* Register PCI slot */
 	ret = pci_hp_register(&php_slot->slot, php_slot->bus,
 			      php_slot->slot_no, php_slot->name);
-	if (unlikely(ret)) {
+	if (ret) {
 		dev_warn(&php_slot->pdev->dev, "Error %d registering slot\n",
 			 ret);
 		return ret;
@@ -609,33 +644,213 @@
 	return 0;
 }
 
+static int pnv_php_enable_msix(struct pnv_php_slot *php_slot)
+{
+	struct pci_dev *pdev = php_slot->pdev;
+	struct msix_entry entry;
+	int nr_entries, ret;
+	u16 pcie_flag;
+
+	/* Get total number of MSIx entries */
+	nr_entries = pci_msix_vec_count(pdev);
+	if (nr_entries < 0)
+		return nr_entries;
+
+	/* Check hotplug MSIx entry is in range */
+	pcie_capability_read_word(pdev, PCI_EXP_FLAGS, &pcie_flag);
+	entry.entry = (pcie_flag & PCI_EXP_FLAGS_IRQ) >> 9;
+	if (entry.entry >= nr_entries)
+		return -ERANGE;
+
+	/* Enable MSIx */
+	ret = pci_enable_msix_exact(pdev, &entry, 1);
+	if (ret) {
+		dev_warn(&pdev->dev, "Error %d enabling MSIx\n", ret);
+		return ret;
+	}
+
+	return entry.vector;
+}
+
+static void pnv_php_event_handler(struct work_struct *work)
+{
+	struct pnv_php_event *event =
+		container_of(work, struct pnv_php_event, work);
+	struct pnv_php_slot *php_slot = event->php_slot;
+
+	if (event->added)
+		pnv_php_enable_slot(&php_slot->slot);
+	else
+		pnv_php_disable_slot(&php_slot->slot);
+
+	kfree(event);
+}
+
+static irqreturn_t pnv_php_interrupt(int irq, void *data)
+{
+	struct pnv_php_slot *php_slot = data;
+	struct pci_dev *pchild, *pdev = php_slot->pdev;
+	struct eeh_dev *edev;
+	struct eeh_pe *pe;
+	struct pnv_php_event *event;
+	u16 sts, lsts;
+	u8 presence;
+	bool added;
+	unsigned long flags;
+	int ret;
+
+	pcie_capability_read_word(pdev, PCI_EXP_SLTSTA, &sts);
+	sts &= (PCI_EXP_SLTSTA_PDC | PCI_EXP_SLTSTA_DLLSC);
+	pcie_capability_write_word(pdev, PCI_EXP_SLTSTA, sts);
+	if (sts & PCI_EXP_SLTSTA_DLLSC) {
+		pcie_capability_read_word(pdev, PCI_EXP_LNKSTA, &lsts);
+		added = !!(lsts & PCI_EXP_LNKSTA_DLLLA);
+	} else if (sts & PCI_EXP_SLTSTA_PDC) {
+		ret = pnv_pci_get_presence_state(php_slot->id, &presence);
+		if (!ret)
+			return IRQ_HANDLED;
+		added = !!(presence == OPAL_PCI_SLOT_PRESENT);
+	} else {
+		return IRQ_NONE;
+	}
+
+	/* Freeze the removed PE to avoid unexpected error reporting */
+	if (!added) {
+		pchild = list_first_entry_or_null(&php_slot->bus->devices,
+						  struct pci_dev, bus_list);
+		edev = pchild ? pci_dev_to_eeh_dev(pchild) : NULL;
+		pe = edev ? edev->pe : NULL;
+		if (pe) {
+			eeh_serialize_lock(&flags);
+			eeh_pe_state_mark(pe, EEH_PE_ISOLATED);
+			eeh_serialize_unlock(flags);
+			eeh_pe_set_option(pe, EEH_OPT_FREEZE_PE);
+		}
+	}
+
+	/*
+	 * The PE is left in frozen state if the event is missed. It's
+	 * fine as the PCI devices (PE) aren't functional any more.
+	 */
+	event = kzalloc(sizeof(*event), GFP_ATOMIC);
+	if (!event) {
+		dev_warn(&pdev->dev, "PCI slot [%s] missed hotplug event 0x%04x\n",
+			 php_slot->name, sts);
+		return IRQ_HANDLED;
+	}
+
+	dev_info(&pdev->dev, "PCI slot [%s] %s (IRQ: %d)\n",
+		 php_slot->name, added ? "added" : "removed", irq);
+	INIT_WORK(&event->work, pnv_php_event_handler);
+	event->added = added;
+	event->php_slot = php_slot;
+	queue_work(php_slot->wq, &event->work);
+
+	return IRQ_HANDLED;
+}
+
+static void pnv_php_init_irq(struct pnv_php_slot *php_slot, int irq)
+{
+	struct pci_dev *pdev = php_slot->pdev;
+	u16 sts, ctrl;
+	int ret;
+
+	/* Allocate workqueue */
+	php_slot->wq = alloc_workqueue("pciehp-%s", 0, 0, php_slot->name);
+	if (!php_slot->wq) {
+		dev_warn(&pdev->dev, "Cannot alloc workqueue\n");
+		pnv_php_disable_irq(php_slot);
+		return;
+	}
+
+	/* Clear pending interrupts */
+	pcie_capability_read_word(pdev, PCI_EXP_SLTSTA, &sts);
+	sts |= (PCI_EXP_SLTSTA_PDC | PCI_EXP_SLTSTA_DLLSC);
+	pcie_capability_write_word(pdev, PCI_EXP_SLTSTA, sts);
+
+	/* Request the interrupt */
+	ret = request_irq(irq, pnv_php_interrupt, IRQF_SHARED,
+			  php_slot->name, php_slot);
+	if (ret) {
+		pnv_php_disable_irq(php_slot);
+		dev_warn(&pdev->dev, "Error %d enabling IRQ %d\n", ret, irq);
+		return;
+	}
+
+	/* Enable the interrupts */
+	pcie_capability_read_word(pdev, PCI_EXP_SLTCTL, &ctrl);
+	ctrl |= (PCI_EXP_SLTCTL_HPIE |
+		 PCI_EXP_SLTCTL_PDCE |
+		 PCI_EXP_SLTCTL_DLLSCE);
+	pcie_capability_write_word(pdev, PCI_EXP_SLTCTL, ctrl);
+
+	/* The interrupt is initialized successfully when @irq is valid */
+	php_slot->irq = irq;
+}
+
+static void pnv_php_enable_irq(struct pnv_php_slot *php_slot)
+{
+	struct pci_dev *pdev = php_slot->pdev;
+	int irq, ret;
+
+	ret = pci_enable_device(pdev);
+	if (ret) {
+		dev_warn(&pdev->dev, "Error %d enabling device\n", ret);
+		return;
+	}
+
+	pci_set_master(pdev);
+
+	/* Enable MSIx interrupt */
+	irq = pnv_php_enable_msix(php_slot);
+	if (irq > 0) {
+		pnv_php_init_irq(php_slot, irq);
+		return;
+	}
+
+	/*
+	 * Use MSI if MSIx doesn't work. Fail back to legacy INTx
+	 * if MSI doesn't work either
+	 */
+	ret = pci_enable_msi(pdev);
+	if (!ret || pdev->irq) {
+		irq = pdev->irq;
+		pnv_php_init_irq(php_slot, irq);
+	}
+}
+
 static int pnv_php_register_one(struct device_node *dn)
 {
 	struct pnv_php_slot *php_slot;
-	const __be32 *prop32;
+	u32 prop32;
 	int ret;
 
 	/* Check if it's hotpluggable slot */
-	prop32 = of_get_property(dn, "ibm,slot-pluggable", NULL);
-	if (!prop32 || !of_read_number(prop32, 1))
+	ret = of_property_read_u32(dn, "ibm,slot-pluggable", &prop32);
+	if (ret || !prop32)
 		return -ENXIO;
 
-	prop32 = of_get_property(dn, "ibm,reset-by-firmware", NULL);
-	if (!prop32 || !of_read_number(prop32, 1))
+	ret = of_property_read_u32(dn, "ibm,reset-by-firmware", &prop32);
+	if (ret || !prop32)
 		return -ENXIO;
 
 	php_slot = pnv_php_alloc_slot(dn);
-	if (unlikely(!php_slot))
+	if (!php_slot)
 		return -ENODEV;
 
 	ret = pnv_php_register_slot(php_slot);
-	if (unlikely(ret))
+	if (ret)
 		goto free_slot;
 
 	ret = pnv_php_enable(php_slot, false);
-	if (unlikely(ret))
+	if (ret)
 		goto unregister_slot;
 
+	/* Enable interrupt if the slot supports surprise hotplug */
+	ret = of_property_read_u32(dn, "ibm,slot-surprise-pluggable", &prop32);
+	if (!ret && prop32)
+		pnv_php_enable_irq(php_slot);
+
 	return 0;
 
 unregister_slot:
diff --git a/drivers/perf/Kconfig b/drivers/perf/Kconfig
index 04e2653..4d5c5f9 100644
--- a/drivers/perf/Kconfig
+++ b/drivers/perf/Kconfig
@@ -12,4 +12,11 @@
 	  Say y if you want to use CPU performance monitors on ARM-based
 	  systems.
 
+config XGENE_PMU
+        depends on PERF_EVENTS && ARCH_XGENE
+        bool "APM X-Gene SoC PMU"
+        default n
+        help
+          Say y if you want to use APM X-Gene SoC performance monitors.
+
 endmenu
diff --git a/drivers/perf/Makefile b/drivers/perf/Makefile
index acd2397..b116e98 100644
--- a/drivers/perf/Makefile
+++ b/drivers/perf/Makefile
@@ -1 +1,2 @@
 obj-$(CONFIG_ARM_PMU) += arm_pmu.o
+obj-$(CONFIG_XGENE_PMU) += xgene_pmu.o
diff --git a/drivers/perf/xgene_pmu.c b/drivers/perf/xgene_pmu.c
new file mode 100644
index 0000000..c2ac764
--- /dev/null
+++ b/drivers/perf/xgene_pmu.c
@@ -0,0 +1,1398 @@
+/*
+ * APM X-Gene SoC PMU (Performance Monitor Unit)
+ *
+ * Copyright (c) 2016, Applied Micro Circuits Corporation
+ * Author: Hoan Tran <hotran@apm.com>
+ *         Tai Nguyen <ttnguyen@apm.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/acpi.h>
+#include <linux/clk.h>
+#include <linux/cpumask.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of_address.h>
+#include <linux/of_fdt.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/perf_event.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#define CSW_CSWCR                       0x0000
+#define  CSW_CSWCR_DUALMCB_MASK         BIT(0)
+#define MCBADDRMR                       0x0000
+#define  MCBADDRMR_DUALMCU_MODE_MASK    BIT(2)
+
+#define PCPPMU_INTSTATUS_REG	0x000
+#define PCPPMU_INTMASK_REG	0x004
+#define  PCPPMU_INTMASK		0x0000000F
+#define  PCPPMU_INTENMASK	0xFFFFFFFF
+#define  PCPPMU_INTCLRMASK	0xFFFFFFF0
+#define  PCPPMU_INT_MCU		BIT(0)
+#define  PCPPMU_INT_MCB		BIT(1)
+#define  PCPPMU_INT_L3C		BIT(2)
+#define  PCPPMU_INT_IOB		BIT(3)
+
+#define PMU_MAX_COUNTERS	4
+#define PMU_CNT_MAX_PERIOD	0x100000000ULL
+#define PMU_OVERFLOW_MASK	0xF
+#define PMU_PMCR_E		BIT(0)
+#define PMU_PMCR_P		BIT(1)
+
+#define PMU_PMEVCNTR0		0x000
+#define PMU_PMEVCNTR1		0x004
+#define PMU_PMEVCNTR2		0x008
+#define PMU_PMEVCNTR3		0x00C
+#define PMU_PMEVTYPER0		0x400
+#define PMU_PMEVTYPER1		0x404
+#define PMU_PMEVTYPER2		0x408
+#define PMU_PMEVTYPER3		0x40C
+#define PMU_PMAMR0		0xA00
+#define PMU_PMAMR1		0xA04
+#define PMU_PMCNTENSET		0xC00
+#define PMU_PMCNTENCLR		0xC20
+#define PMU_PMINTENSET		0xC40
+#define PMU_PMINTENCLR		0xC60
+#define PMU_PMOVSR		0xC80
+#define PMU_PMCR		0xE04
+
+#define to_pmu_dev(p)     container_of(p, struct xgene_pmu_dev, pmu)
+#define GET_CNTR(ev)      (ev->hw.idx)
+#define GET_EVENTID(ev)   (ev->hw.config & 0xFFULL)
+#define GET_AGENTID(ev)   (ev->hw.config_base & 0xFFFFFFFFUL)
+#define GET_AGENT1ID(ev)  ((ev->hw.config_base >> 32) & 0xFFFFFFFFUL)
+
+struct hw_pmu_info {
+	u32 type;
+	u32 enable_mask;
+	void __iomem *csr;
+};
+
+struct xgene_pmu_dev {
+	struct hw_pmu_info *inf;
+	struct xgene_pmu *parent;
+	struct pmu pmu;
+	u8 max_counters;
+	DECLARE_BITMAP(cntr_assign_mask, PMU_MAX_COUNTERS);
+	u64 max_period;
+	const struct attribute_group **attr_groups;
+	struct perf_event *pmu_counter_event[PMU_MAX_COUNTERS];
+};
+
+struct xgene_pmu {
+	struct device *dev;
+	int version;
+	void __iomem *pcppmu_csr;
+	u32 mcb_active_mask;
+	u32 mc_active_mask;
+	cpumask_t cpu;
+	raw_spinlock_t lock;
+	struct list_head l3cpmus;
+	struct list_head iobpmus;
+	struct list_head mcbpmus;
+	struct list_head mcpmus;
+};
+
+struct xgene_pmu_dev_ctx {
+	char *name;
+	struct list_head next;
+	struct xgene_pmu_dev *pmu_dev;
+	struct hw_pmu_info inf;
+};
+
+struct xgene_pmu_data {
+	int id;
+	u32 data;
+};
+
+enum xgene_pmu_version {
+	PCP_PMU_V1 = 1,
+	PCP_PMU_V2,
+};
+
+enum xgene_pmu_dev_type {
+	PMU_TYPE_L3C = 0,
+	PMU_TYPE_IOB,
+	PMU_TYPE_MCB,
+	PMU_TYPE_MC,
+};
+
+/*
+ * sysfs format attributes
+ */
+static ssize_t xgene_pmu_format_show(struct device *dev,
+				     struct device_attribute *attr, char *buf)
+{
+	struct dev_ext_attribute *eattr;
+
+	eattr = container_of(attr, struct dev_ext_attribute, attr);
+	return sprintf(buf, "%s\n", (char *) eattr->var);
+}
+
+#define XGENE_PMU_FORMAT_ATTR(_name, _config)		\
+	(&((struct dev_ext_attribute[]) {		\
+		{ .attr = __ATTR(_name, S_IRUGO, xgene_pmu_format_show, NULL), \
+		  .var = (void *) _config, }		\
+	})[0].attr.attr)
+
+static struct attribute *l3c_pmu_format_attrs[] = {
+	XGENE_PMU_FORMAT_ATTR(l3c_eventid, "config:0-7"),
+	XGENE_PMU_FORMAT_ATTR(l3c_agentid, "config1:0-9"),
+	NULL,
+};
+
+static struct attribute *iob_pmu_format_attrs[] = {
+	XGENE_PMU_FORMAT_ATTR(iob_eventid, "config:0-7"),
+	XGENE_PMU_FORMAT_ATTR(iob_agentid, "config1:0-63"),
+	NULL,
+};
+
+static struct attribute *mcb_pmu_format_attrs[] = {
+	XGENE_PMU_FORMAT_ATTR(mcb_eventid, "config:0-5"),
+	XGENE_PMU_FORMAT_ATTR(mcb_agentid, "config1:0-9"),
+	NULL,
+};
+
+static struct attribute *mc_pmu_format_attrs[] = {
+	XGENE_PMU_FORMAT_ATTR(mc_eventid, "config:0-28"),
+	NULL,
+};
+
+static const struct attribute_group l3c_pmu_format_attr_group = {
+	.name = "format",
+	.attrs = l3c_pmu_format_attrs,
+};
+
+static const struct attribute_group iob_pmu_format_attr_group = {
+	.name = "format",
+	.attrs = iob_pmu_format_attrs,
+};
+
+static const struct attribute_group mcb_pmu_format_attr_group = {
+	.name = "format",
+	.attrs = mcb_pmu_format_attrs,
+};
+
+static const struct attribute_group mc_pmu_format_attr_group = {
+	.name = "format",
+	.attrs = mc_pmu_format_attrs,
+};
+
+/*
+ * sysfs event attributes
+ */
+static ssize_t xgene_pmu_event_show(struct device *dev,
+				    struct device_attribute *attr, char *buf)
+{
+	struct dev_ext_attribute *eattr;
+
+	eattr = container_of(attr, struct dev_ext_attribute, attr);
+	return sprintf(buf, "config=0x%lx\n", (unsigned long) eattr->var);
+}
+
+#define XGENE_PMU_EVENT_ATTR(_name, _config)		\
+	(&((struct dev_ext_attribute[]) {		\
+		{ .attr = __ATTR(_name, S_IRUGO, xgene_pmu_event_show, NULL), \
+		  .var = (void *) _config, }		\
+	 })[0].attr.attr)
+
+static struct attribute *l3c_pmu_events_attrs[] = {
+	XGENE_PMU_EVENT_ATTR(cycle-count,			0x00),
+	XGENE_PMU_EVENT_ATTR(cycle-count-div-64,		0x01),
+	XGENE_PMU_EVENT_ATTR(read-hit,				0x02),
+	XGENE_PMU_EVENT_ATTR(read-miss,				0x03),
+	XGENE_PMU_EVENT_ATTR(write-need-replacement,		0x06),
+	XGENE_PMU_EVENT_ATTR(write-not-need-replacement,	0x07),
+	XGENE_PMU_EVENT_ATTR(tq-full,				0x08),
+	XGENE_PMU_EVENT_ATTR(ackq-full,				0x09),
+	XGENE_PMU_EVENT_ATTR(wdb-full,				0x0a),
+	XGENE_PMU_EVENT_ATTR(bank-fifo-full,			0x0b),
+	XGENE_PMU_EVENT_ATTR(odb-full,				0x0c),
+	XGENE_PMU_EVENT_ATTR(wbq-full,				0x0d),
+	XGENE_PMU_EVENT_ATTR(bank-conflict-fifo-issue,		0x0e),
+	XGENE_PMU_EVENT_ATTR(bank-fifo-issue,			0x0f),
+	NULL,
+};
+
+static struct attribute *iob_pmu_events_attrs[] = {
+	XGENE_PMU_EVENT_ATTR(cycle-count,			0x00),
+	XGENE_PMU_EVENT_ATTR(cycle-count-div-64,		0x01),
+	XGENE_PMU_EVENT_ATTR(axi0-read,				0x02),
+	XGENE_PMU_EVENT_ATTR(axi0-read-partial,			0x03),
+	XGENE_PMU_EVENT_ATTR(axi1-read,				0x04),
+	XGENE_PMU_EVENT_ATTR(axi1-read-partial,			0x05),
+	XGENE_PMU_EVENT_ATTR(csw-read-block,			0x06),
+	XGENE_PMU_EVENT_ATTR(csw-read-partial,			0x07),
+	XGENE_PMU_EVENT_ATTR(axi0-write,			0x10),
+	XGENE_PMU_EVENT_ATTR(axi0-write-partial,		0x11),
+	XGENE_PMU_EVENT_ATTR(axi1-write,			0x13),
+	XGENE_PMU_EVENT_ATTR(axi1-write-partial,		0x14),
+	XGENE_PMU_EVENT_ATTR(csw-inbound-dirty,			0x16),
+	NULL,
+};
+
+static struct attribute *mcb_pmu_events_attrs[] = {
+	XGENE_PMU_EVENT_ATTR(cycle-count,			0x00),
+	XGENE_PMU_EVENT_ATTR(cycle-count-div-64,		0x01),
+	XGENE_PMU_EVENT_ATTR(csw-read,				0x02),
+	XGENE_PMU_EVENT_ATTR(csw-write-request,			0x03),
+	XGENE_PMU_EVENT_ATTR(mcb-csw-stall,			0x04),
+	XGENE_PMU_EVENT_ATTR(cancel-read-gack,			0x05),
+	NULL,
+};
+
+static struct attribute *mc_pmu_events_attrs[] = {
+	XGENE_PMU_EVENT_ATTR(cycle-count,			0x00),
+	XGENE_PMU_EVENT_ATTR(cycle-count-div-64,		0x01),
+	XGENE_PMU_EVENT_ATTR(act-cmd-sent,			0x02),
+	XGENE_PMU_EVENT_ATTR(pre-cmd-sent,			0x03),
+	XGENE_PMU_EVENT_ATTR(rd-cmd-sent,			0x04),
+	XGENE_PMU_EVENT_ATTR(rda-cmd-sent,			0x05),
+	XGENE_PMU_EVENT_ATTR(wr-cmd-sent,			0x06),
+	XGENE_PMU_EVENT_ATTR(wra-cmd-sent,			0x07),
+	XGENE_PMU_EVENT_ATTR(pde-cmd-sent,			0x08),
+	XGENE_PMU_EVENT_ATTR(sre-cmd-sent,			0x09),
+	XGENE_PMU_EVENT_ATTR(prea-cmd-sent,			0x0a),
+	XGENE_PMU_EVENT_ATTR(ref-cmd-sent,			0x0b),
+	XGENE_PMU_EVENT_ATTR(rd-rda-cmd-sent,			0x0c),
+	XGENE_PMU_EVENT_ATTR(wr-wra-cmd-sent,			0x0d),
+	XGENE_PMU_EVENT_ATTR(in-rd-collision,			0x0e),
+	XGENE_PMU_EVENT_ATTR(in-wr-collision,			0x0f),
+	XGENE_PMU_EVENT_ATTR(collision-queue-not-empty,		0x10),
+	XGENE_PMU_EVENT_ATTR(collision-queue-full,		0x11),
+	XGENE_PMU_EVENT_ATTR(mcu-request,			0x12),
+	XGENE_PMU_EVENT_ATTR(mcu-rd-request,			0x13),
+	XGENE_PMU_EVENT_ATTR(mcu-hp-rd-request,			0x14),
+	XGENE_PMU_EVENT_ATTR(mcu-wr-request,			0x15),
+	XGENE_PMU_EVENT_ATTR(mcu-rd-proceed-all,		0x16),
+	XGENE_PMU_EVENT_ATTR(mcu-rd-proceed-cancel,		0x17),
+	XGENE_PMU_EVENT_ATTR(mcu-rd-response,			0x18),
+	XGENE_PMU_EVENT_ATTR(mcu-rd-proceed-speculative-all,	0x19),
+	XGENE_PMU_EVENT_ATTR(mcu-rd-proceed-speculative-cancel,	0x1a),
+	XGENE_PMU_EVENT_ATTR(mcu-wr-proceed-all,		0x1b),
+	XGENE_PMU_EVENT_ATTR(mcu-wr-proceed-cancel,		0x1c),
+	NULL,
+};
+
+static const struct attribute_group l3c_pmu_events_attr_group = {
+	.name = "events",
+	.attrs = l3c_pmu_events_attrs,
+};
+
+static const struct attribute_group iob_pmu_events_attr_group = {
+	.name = "events",
+	.attrs = iob_pmu_events_attrs,
+};
+
+static const struct attribute_group mcb_pmu_events_attr_group = {
+	.name = "events",
+	.attrs = mcb_pmu_events_attrs,
+};
+
+static const struct attribute_group mc_pmu_events_attr_group = {
+	.name = "events",
+	.attrs = mc_pmu_events_attrs,
+};
+
+/*
+ * sysfs cpumask attributes
+ */
+static ssize_t xgene_pmu_cpumask_show(struct device *dev,
+				      struct device_attribute *attr, char *buf)
+{
+	struct xgene_pmu_dev *pmu_dev = to_pmu_dev(dev_get_drvdata(dev));
+
+	return cpumap_print_to_pagebuf(true, buf, &pmu_dev->parent->cpu);
+}
+
+static DEVICE_ATTR(cpumask, S_IRUGO, xgene_pmu_cpumask_show, NULL);
+
+static struct attribute *xgene_pmu_cpumask_attrs[] = {
+	&dev_attr_cpumask.attr,
+	NULL,
+};
+
+static const struct attribute_group pmu_cpumask_attr_group = {
+	.attrs = xgene_pmu_cpumask_attrs,
+};
+
+/*
+ * Per PMU device attribute groups
+ */
+static const struct attribute_group *l3c_pmu_attr_groups[] = {
+	&l3c_pmu_format_attr_group,
+	&pmu_cpumask_attr_group,
+	&l3c_pmu_events_attr_group,
+	NULL
+};
+
+static const struct attribute_group *iob_pmu_attr_groups[] = {
+	&iob_pmu_format_attr_group,
+	&pmu_cpumask_attr_group,
+	&iob_pmu_events_attr_group,
+	NULL
+};
+
+static const struct attribute_group *mcb_pmu_attr_groups[] = {
+	&mcb_pmu_format_attr_group,
+	&pmu_cpumask_attr_group,
+	&mcb_pmu_events_attr_group,
+	NULL
+};
+
+static const struct attribute_group *mc_pmu_attr_groups[] = {
+	&mc_pmu_format_attr_group,
+	&pmu_cpumask_attr_group,
+	&mc_pmu_events_attr_group,
+	NULL
+};
+
+static int get_next_avail_cntr(struct xgene_pmu_dev *pmu_dev)
+{
+	int cntr;
+
+	cntr = find_first_zero_bit(pmu_dev->cntr_assign_mask,
+				pmu_dev->max_counters);
+	if (cntr == pmu_dev->max_counters)
+		return -ENOSPC;
+	set_bit(cntr, pmu_dev->cntr_assign_mask);
+
+	return cntr;
+}
+
+static void clear_avail_cntr(struct xgene_pmu_dev *pmu_dev, int cntr)
+{
+	clear_bit(cntr, pmu_dev->cntr_assign_mask);
+}
+
+static inline void xgene_pmu_mask_int(struct xgene_pmu *xgene_pmu)
+{
+	writel(PCPPMU_INTENMASK, xgene_pmu->pcppmu_csr + PCPPMU_INTMASK_REG);
+}
+
+static inline void xgene_pmu_unmask_int(struct xgene_pmu *xgene_pmu)
+{
+	writel(PCPPMU_INTCLRMASK, xgene_pmu->pcppmu_csr + PCPPMU_INTMASK_REG);
+}
+
+static inline u32 xgene_pmu_read_counter(struct xgene_pmu_dev *pmu_dev, int idx)
+{
+	return readl(pmu_dev->inf->csr + PMU_PMEVCNTR0 + (4 * idx));
+}
+
+static inline void
+xgene_pmu_write_counter(struct xgene_pmu_dev *pmu_dev, int idx, u32 val)
+{
+	writel(val, pmu_dev->inf->csr + PMU_PMEVCNTR0 + (4 * idx));
+}
+
+static inline void
+xgene_pmu_write_evttype(struct xgene_pmu_dev *pmu_dev, int idx, u32 val)
+{
+	writel(val, pmu_dev->inf->csr + PMU_PMEVTYPER0 + (4 * idx));
+}
+
+static inline void
+xgene_pmu_write_agentmsk(struct xgene_pmu_dev *pmu_dev, u32 val)
+{
+	writel(val, pmu_dev->inf->csr + PMU_PMAMR0);
+}
+
+static inline void
+xgene_pmu_write_agent1msk(struct xgene_pmu_dev *pmu_dev, u32 val)
+{
+	writel(val, pmu_dev->inf->csr + PMU_PMAMR1);
+}
+
+static inline void
+xgene_pmu_enable_counter(struct xgene_pmu_dev *pmu_dev, int idx)
+{
+	u32 val;
+
+	val = readl(pmu_dev->inf->csr + PMU_PMCNTENSET);
+	val |= 1 << idx;
+	writel(val, pmu_dev->inf->csr + PMU_PMCNTENSET);
+}
+
+static inline void
+xgene_pmu_disable_counter(struct xgene_pmu_dev *pmu_dev, int idx)
+{
+	u32 val;
+
+	val = readl(pmu_dev->inf->csr + PMU_PMCNTENCLR);
+	val |= 1 << idx;
+	writel(val, pmu_dev->inf->csr + PMU_PMCNTENCLR);
+}
+
+static inline void
+xgene_pmu_enable_counter_int(struct xgene_pmu_dev *pmu_dev, int idx)
+{
+	u32 val;
+
+	val = readl(pmu_dev->inf->csr + PMU_PMINTENSET);
+	val |= 1 << idx;
+	writel(val, pmu_dev->inf->csr + PMU_PMINTENSET);
+}
+
+static inline void
+xgene_pmu_disable_counter_int(struct xgene_pmu_dev *pmu_dev, int idx)
+{
+	u32 val;
+
+	val = readl(pmu_dev->inf->csr + PMU_PMINTENCLR);
+	val |= 1 << idx;
+	writel(val, pmu_dev->inf->csr + PMU_PMINTENCLR);
+}
+
+static inline void xgene_pmu_reset_counters(struct xgene_pmu_dev *pmu_dev)
+{
+	u32 val;
+
+	val = readl(pmu_dev->inf->csr + PMU_PMCR);
+	val |= PMU_PMCR_P;
+	writel(val, pmu_dev->inf->csr + PMU_PMCR);
+}
+
+static inline void xgene_pmu_start_counters(struct xgene_pmu_dev *pmu_dev)
+{
+	u32 val;
+
+	val = readl(pmu_dev->inf->csr + PMU_PMCR);
+	val |= PMU_PMCR_E;
+	writel(val, pmu_dev->inf->csr + PMU_PMCR);
+}
+
+static inline void xgene_pmu_stop_counters(struct xgene_pmu_dev *pmu_dev)
+{
+	u32 val;
+
+	val = readl(pmu_dev->inf->csr + PMU_PMCR);
+	val &= ~PMU_PMCR_E;
+	writel(val, pmu_dev->inf->csr + PMU_PMCR);
+}
+
+static void xgene_perf_pmu_enable(struct pmu *pmu)
+{
+	struct xgene_pmu_dev *pmu_dev = to_pmu_dev(pmu);
+	int enabled = bitmap_weight(pmu_dev->cntr_assign_mask,
+			pmu_dev->max_counters);
+
+	if (!enabled)
+		return;
+
+	xgene_pmu_start_counters(pmu_dev);
+}
+
+static void xgene_perf_pmu_disable(struct pmu *pmu)
+{
+	struct xgene_pmu_dev *pmu_dev = to_pmu_dev(pmu);
+
+	xgene_pmu_stop_counters(pmu_dev);
+}
+
+static int xgene_perf_event_init(struct perf_event *event)
+{
+	struct xgene_pmu_dev *pmu_dev = to_pmu_dev(event->pmu);
+	struct hw_perf_event *hw = &event->hw;
+	struct perf_event *sibling;
+
+	/* Test the event attr type check for PMU enumeration */
+	if (event->attr.type != event->pmu->type)
+		return -ENOENT;
+
+	/*
+	 * SOC PMU counters are shared across all cores.
+	 * Therefore, it does not support per-process mode.
+	 * Also, it does not support event sampling mode.
+	 */
+	if (is_sampling_event(event) || event->attach_state & PERF_ATTACH_TASK)
+		return -EINVAL;
+
+	/* SOC counters do not have usr/os/guest/host bits */
+	if (event->attr.exclude_user || event->attr.exclude_kernel ||
+	    event->attr.exclude_host || event->attr.exclude_guest)
+		return -EINVAL;
+
+	if (event->cpu < 0)
+		return -EINVAL;
+	/*
+	 * Many perf core operations (eg. events rotation) operate on a
+	 * single CPU context. This is obvious for CPU PMUs, where one
+	 * expects the same sets of events being observed on all CPUs,
+	 * but can lead to issues for off-core PMUs, where each
+	 * event could be theoretically assigned to a different CPU. To
+	 * mitigate this, we enforce CPU assignment to one, selected
+	 * processor (the one described in the "cpumask" attribute).
+	 */
+	event->cpu = cpumask_first(&pmu_dev->parent->cpu);
+
+	hw->config = event->attr.config;
+	/*
+	 * Each bit of the config1 field represents an agent from which the
+	 * request of the event come. The event is counted only if it's caused
+	 * by a request of an agent has the bit cleared.
+	 * By default, the event is counted for all agents.
+	 */
+	hw->config_base = event->attr.config1;
+
+	/*
+	 * We must NOT create groups containing mixed PMUs, although software
+	 * events are acceptable
+	 */
+	if (event->group_leader->pmu != event->pmu &&
+			!is_software_event(event->group_leader))
+		return -EINVAL;
+
+	list_for_each_entry(sibling, &event->group_leader->sibling_list,
+			group_entry)
+		if (sibling->pmu != event->pmu &&
+				!is_software_event(sibling))
+			return -EINVAL;
+
+	return 0;
+}
+
+static void xgene_perf_enable_event(struct perf_event *event)
+{
+	struct xgene_pmu_dev *pmu_dev = to_pmu_dev(event->pmu);
+
+	xgene_pmu_write_evttype(pmu_dev, GET_CNTR(event), GET_EVENTID(event));
+	xgene_pmu_write_agentmsk(pmu_dev, ~((u32)GET_AGENTID(event)));
+	if (pmu_dev->inf->type == PMU_TYPE_IOB)
+		xgene_pmu_write_agent1msk(pmu_dev, ~((u32)GET_AGENT1ID(event)));
+
+	xgene_pmu_enable_counter(pmu_dev, GET_CNTR(event));
+	xgene_pmu_enable_counter_int(pmu_dev, GET_CNTR(event));
+}
+
+static void xgene_perf_disable_event(struct perf_event *event)
+{
+	struct xgene_pmu_dev *pmu_dev = to_pmu_dev(event->pmu);
+
+	xgene_pmu_disable_counter(pmu_dev, GET_CNTR(event));
+	xgene_pmu_disable_counter_int(pmu_dev, GET_CNTR(event));
+}
+
+static void xgene_perf_event_set_period(struct perf_event *event)
+{
+	struct xgene_pmu_dev *pmu_dev = to_pmu_dev(event->pmu);
+	struct hw_perf_event *hw = &event->hw;
+	/*
+	 * The X-Gene PMU counters have a period of 2^32. To account for the
+	 * possiblity of extreme interrupt latency we program for a period of
+	 * half that. Hopefully we can handle the interrupt before another 2^31
+	 * events occur and the counter overtakes its previous value.
+	 */
+	u64 val = 1ULL << 31;
+
+	local64_set(&hw->prev_count, val);
+	xgene_pmu_write_counter(pmu_dev, hw->idx, (u32) val);
+}
+
+static void xgene_perf_event_update(struct perf_event *event)
+{
+	struct xgene_pmu_dev *pmu_dev = to_pmu_dev(event->pmu);
+	struct hw_perf_event *hw = &event->hw;
+	u64 delta, prev_raw_count, new_raw_count;
+
+again:
+	prev_raw_count = local64_read(&hw->prev_count);
+	new_raw_count = xgene_pmu_read_counter(pmu_dev, GET_CNTR(event));
+
+	if (local64_cmpxchg(&hw->prev_count, prev_raw_count,
+			    new_raw_count) != prev_raw_count)
+		goto again;
+
+	delta = (new_raw_count - prev_raw_count) & pmu_dev->max_period;
+
+	local64_add(delta, &event->count);
+}
+
+static void xgene_perf_read(struct perf_event *event)
+{
+	xgene_perf_event_update(event);
+}
+
+static void xgene_perf_start(struct perf_event *event, int flags)
+{
+	struct xgene_pmu_dev *pmu_dev = to_pmu_dev(event->pmu);
+	struct hw_perf_event *hw = &event->hw;
+
+	if (WARN_ON_ONCE(!(hw->state & PERF_HES_STOPPED)))
+		return;
+
+	WARN_ON_ONCE(!(hw->state & PERF_HES_UPTODATE));
+	hw->state = 0;
+
+	xgene_perf_event_set_period(event);
+
+	if (flags & PERF_EF_RELOAD) {
+		u64 prev_raw_count =  local64_read(&hw->prev_count);
+
+		xgene_pmu_write_counter(pmu_dev, GET_CNTR(event),
+					(u32) prev_raw_count);
+	}
+
+	xgene_perf_enable_event(event);
+	perf_event_update_userpage(event);
+}
+
+static void xgene_perf_stop(struct perf_event *event, int flags)
+{
+	struct hw_perf_event *hw = &event->hw;
+	u64 config;
+
+	if (hw->state & PERF_HES_UPTODATE)
+		return;
+
+	xgene_perf_disable_event(event);
+	WARN_ON_ONCE(hw->state & PERF_HES_STOPPED);
+	hw->state |= PERF_HES_STOPPED;
+
+	if (hw->state & PERF_HES_UPTODATE)
+		return;
+
+	config = hw->config;
+	xgene_perf_read(event);
+	hw->state |= PERF_HES_UPTODATE;
+}
+
+static int xgene_perf_add(struct perf_event *event, int flags)
+{
+	struct xgene_pmu_dev *pmu_dev = to_pmu_dev(event->pmu);
+	struct hw_perf_event *hw = &event->hw;
+
+	hw->state = PERF_HES_UPTODATE | PERF_HES_STOPPED;
+
+	/* Allocate an event counter */
+	hw->idx = get_next_avail_cntr(pmu_dev);
+	if (hw->idx < 0)
+		return -EAGAIN;
+
+	/* Update counter event pointer for Interrupt handler */
+	pmu_dev->pmu_counter_event[hw->idx] = event;
+
+	if (flags & PERF_EF_START)
+		xgene_perf_start(event, PERF_EF_RELOAD);
+
+	return 0;
+}
+
+static void xgene_perf_del(struct perf_event *event, int flags)
+{
+	struct xgene_pmu_dev *pmu_dev = to_pmu_dev(event->pmu);
+	struct hw_perf_event *hw = &event->hw;
+
+	xgene_perf_stop(event, PERF_EF_UPDATE);
+
+	/* clear the assigned counter */
+	clear_avail_cntr(pmu_dev, GET_CNTR(event));
+
+	perf_event_update_userpage(event);
+	pmu_dev->pmu_counter_event[hw->idx] = NULL;
+}
+
+static int xgene_init_perf(struct xgene_pmu_dev *pmu_dev, char *name)
+{
+	struct xgene_pmu *xgene_pmu;
+
+	pmu_dev->max_period = PMU_CNT_MAX_PERIOD - 1;
+	/* First version PMU supports only single event counter */
+	xgene_pmu = pmu_dev->parent;
+	if (xgene_pmu->version == PCP_PMU_V1)
+		pmu_dev->max_counters = 1;
+	else
+		pmu_dev->max_counters = PMU_MAX_COUNTERS;
+
+	/* Perf driver registration */
+	pmu_dev->pmu = (struct pmu) {
+		.attr_groups	= pmu_dev->attr_groups,
+		.task_ctx_nr	= perf_invalid_context,
+		.pmu_enable	= xgene_perf_pmu_enable,
+		.pmu_disable	= xgene_perf_pmu_disable,
+		.event_init	= xgene_perf_event_init,
+		.add		= xgene_perf_add,
+		.del		= xgene_perf_del,
+		.start		= xgene_perf_start,
+		.stop		= xgene_perf_stop,
+		.read		= xgene_perf_read,
+	};
+
+	/* Hardware counter init */
+	xgene_pmu_stop_counters(pmu_dev);
+	xgene_pmu_reset_counters(pmu_dev);
+
+	return perf_pmu_register(&pmu_dev->pmu, name, -1);
+}
+
+static int
+xgene_pmu_dev_add(struct xgene_pmu *xgene_pmu, struct xgene_pmu_dev_ctx *ctx)
+{
+	struct device *dev = xgene_pmu->dev;
+	struct xgene_pmu_dev *pmu;
+	int rc;
+
+	pmu = devm_kzalloc(dev, sizeof(*pmu), GFP_KERNEL);
+	if (!pmu)
+		return -ENOMEM;
+	pmu->parent = xgene_pmu;
+	pmu->inf = &ctx->inf;
+	ctx->pmu_dev = pmu;
+
+	switch (pmu->inf->type) {
+	case PMU_TYPE_L3C:
+		pmu->attr_groups = l3c_pmu_attr_groups;
+		break;
+	case PMU_TYPE_IOB:
+		pmu->attr_groups = iob_pmu_attr_groups;
+		break;
+	case PMU_TYPE_MCB:
+		if (!(xgene_pmu->mcb_active_mask & pmu->inf->enable_mask))
+			goto dev_err;
+		pmu->attr_groups = mcb_pmu_attr_groups;
+		break;
+	case PMU_TYPE_MC:
+		if (!(xgene_pmu->mc_active_mask & pmu->inf->enable_mask))
+			goto dev_err;
+		pmu->attr_groups = mc_pmu_attr_groups;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	rc = xgene_init_perf(pmu, ctx->name);
+	if (rc) {
+		dev_err(dev, "%s PMU: Failed to init perf driver\n", ctx->name);
+		goto dev_err;
+	}
+
+	dev_info(dev, "%s PMU registered\n", ctx->name);
+
+	return rc;
+
+dev_err:
+	devm_kfree(dev, pmu);
+	return -ENODEV;
+}
+
+static void _xgene_pmu_isr(int irq, struct xgene_pmu_dev *pmu_dev)
+{
+	struct xgene_pmu *xgene_pmu = pmu_dev->parent;
+	u32 pmovsr;
+	int idx;
+
+	pmovsr = readl(pmu_dev->inf->csr + PMU_PMOVSR) & PMU_OVERFLOW_MASK;
+	if (!pmovsr)
+		return;
+
+	/* Clear interrupt flag */
+	if (xgene_pmu->version == PCP_PMU_V1)
+		writel(0x0, pmu_dev->inf->csr + PMU_PMOVSR);
+	else
+		writel(pmovsr, pmu_dev->inf->csr + PMU_PMOVSR);
+
+	for (idx = 0; idx < PMU_MAX_COUNTERS; idx++) {
+		struct perf_event *event = pmu_dev->pmu_counter_event[idx];
+		int overflowed = pmovsr & BIT(idx);
+
+		/* Ignore if we don't have an event. */
+		if (!event || !overflowed)
+			continue;
+		xgene_perf_event_update(event);
+		xgene_perf_event_set_period(event);
+	}
+}
+
+static irqreturn_t xgene_pmu_isr(int irq, void *dev_id)
+{
+	struct xgene_pmu_dev_ctx *ctx;
+	struct xgene_pmu *xgene_pmu = dev_id;
+	unsigned long flags;
+	u32 val;
+
+	raw_spin_lock_irqsave(&xgene_pmu->lock, flags);
+
+	/* Get Interrupt PMU source */
+	val = readl(xgene_pmu->pcppmu_csr + PCPPMU_INTSTATUS_REG);
+	if (val & PCPPMU_INT_MCU) {
+		list_for_each_entry(ctx, &xgene_pmu->mcpmus, next) {
+			_xgene_pmu_isr(irq, ctx->pmu_dev);
+		}
+	}
+	if (val & PCPPMU_INT_MCB) {
+		list_for_each_entry(ctx, &xgene_pmu->mcbpmus, next) {
+			_xgene_pmu_isr(irq, ctx->pmu_dev);
+		}
+	}
+	if (val & PCPPMU_INT_L3C) {
+		list_for_each_entry(ctx, &xgene_pmu->l3cpmus, next) {
+			_xgene_pmu_isr(irq, ctx->pmu_dev);
+		}
+	}
+	if (val & PCPPMU_INT_IOB) {
+		list_for_each_entry(ctx, &xgene_pmu->iobpmus, next) {
+			_xgene_pmu_isr(irq, ctx->pmu_dev);
+		}
+	}
+
+	raw_spin_unlock_irqrestore(&xgene_pmu->lock, flags);
+
+	return IRQ_HANDLED;
+}
+
+static int acpi_pmu_probe_active_mcb_mcu(struct xgene_pmu *xgene_pmu,
+					 struct platform_device *pdev)
+{
+	void __iomem *csw_csr, *mcba_csr, *mcbb_csr;
+	struct resource *res;
+	unsigned int reg;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	csw_csr = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(csw_csr)) {
+		dev_err(&pdev->dev, "ioremap failed for CSW CSR resource\n");
+		return PTR_ERR(csw_csr);
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
+	mcba_csr = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(mcba_csr)) {
+		dev_err(&pdev->dev, "ioremap failed for MCBA CSR resource\n");
+		return PTR_ERR(mcba_csr);
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 3);
+	mcbb_csr = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(mcbb_csr)) {
+		dev_err(&pdev->dev, "ioremap failed for MCBB CSR resource\n");
+		return PTR_ERR(mcbb_csr);
+	}
+
+	reg = readl(csw_csr + CSW_CSWCR);
+	if (reg & CSW_CSWCR_DUALMCB_MASK) {
+		/* Dual MCB active */
+		xgene_pmu->mcb_active_mask = 0x3;
+		/* Probe all active MC(s) */
+		reg = readl(mcbb_csr + CSW_CSWCR);
+		xgene_pmu->mc_active_mask =
+			(reg & MCBADDRMR_DUALMCU_MODE_MASK) ? 0xF : 0x5;
+	} else {
+		/* Single MCB active */
+		xgene_pmu->mcb_active_mask = 0x1;
+		/* Probe all active MC(s) */
+		reg = readl(mcba_csr + CSW_CSWCR);
+		xgene_pmu->mc_active_mask =
+			(reg & MCBADDRMR_DUALMCU_MODE_MASK) ? 0x3 : 0x1;
+	}
+
+	return 0;
+}
+
+static int fdt_pmu_probe_active_mcb_mcu(struct xgene_pmu *xgene_pmu,
+					struct platform_device *pdev)
+{
+	struct regmap *csw_map, *mcba_map, *mcbb_map;
+	struct device_node *np = pdev->dev.of_node;
+	unsigned int reg;
+
+	csw_map = syscon_regmap_lookup_by_phandle(np, "regmap-csw");
+	if (IS_ERR(csw_map)) {
+		dev_err(&pdev->dev, "unable to get syscon regmap csw\n");
+		return PTR_ERR(csw_map);
+	}
+
+	mcba_map = syscon_regmap_lookup_by_phandle(np, "regmap-mcba");
+	if (IS_ERR(mcba_map)) {
+		dev_err(&pdev->dev, "unable to get syscon regmap mcba\n");
+		return PTR_ERR(mcba_map);
+	}
+
+	mcbb_map = syscon_regmap_lookup_by_phandle(np, "regmap-mcbb");
+	if (IS_ERR(mcbb_map)) {
+		dev_err(&pdev->dev, "unable to get syscon regmap mcbb\n");
+		return PTR_ERR(mcbb_map);
+	}
+
+	if (regmap_read(csw_map, CSW_CSWCR, &reg))
+		return -EINVAL;
+
+	if (reg & CSW_CSWCR_DUALMCB_MASK) {
+		/* Dual MCB active */
+		xgene_pmu->mcb_active_mask = 0x3;
+		/* Probe all active MC(s) */
+		if (regmap_read(mcbb_map, MCBADDRMR, &reg))
+			return 0;
+		xgene_pmu->mc_active_mask =
+			(reg & MCBADDRMR_DUALMCU_MODE_MASK) ? 0xF : 0x5;
+	} else {
+		/* Single MCB active */
+		xgene_pmu->mcb_active_mask = 0x1;
+		/* Probe all active MC(s) */
+		if (regmap_read(mcba_map, MCBADDRMR, &reg))
+			return 0;
+		xgene_pmu->mc_active_mask =
+			(reg & MCBADDRMR_DUALMCU_MODE_MASK) ? 0x3 : 0x1;
+	}
+
+	return 0;
+}
+
+static int xgene_pmu_probe_active_mcb_mcu(struct xgene_pmu *xgene_pmu,
+					  struct platform_device *pdev)
+{
+	if (has_acpi_companion(&pdev->dev))
+		return acpi_pmu_probe_active_mcb_mcu(xgene_pmu, pdev);
+	return fdt_pmu_probe_active_mcb_mcu(xgene_pmu, pdev);
+}
+
+static char *xgene_pmu_dev_name(struct device *dev, u32 type, int id)
+{
+	switch (type) {
+	case PMU_TYPE_L3C:
+		return devm_kasprintf(dev, GFP_KERNEL, "l3c%d", id);
+	case PMU_TYPE_IOB:
+		return devm_kasprintf(dev, GFP_KERNEL, "iob%d", id);
+	case PMU_TYPE_MCB:
+		return devm_kasprintf(dev, GFP_KERNEL, "mcb%d", id);
+	case PMU_TYPE_MC:
+		return devm_kasprintf(dev, GFP_KERNEL, "mc%d", id);
+	default:
+		return devm_kasprintf(dev, GFP_KERNEL, "unknown");
+	}
+}
+
+#if defined(CONFIG_ACPI)
+static int acpi_pmu_dev_add_resource(struct acpi_resource *ares, void *data)
+{
+	struct resource *res = data;
+
+	if (ares->type == ACPI_RESOURCE_TYPE_FIXED_MEMORY32)
+		acpi_dev_resource_memory(ares, res);
+
+	/* Always tell the ACPI core to skip this resource */
+	return 1;
+}
+
+static struct
+xgene_pmu_dev_ctx *acpi_get_pmu_hw_inf(struct xgene_pmu *xgene_pmu,
+				       struct acpi_device *adev, u32 type)
+{
+	struct device *dev = xgene_pmu->dev;
+	struct list_head resource_list;
+	struct xgene_pmu_dev_ctx *ctx;
+	const union acpi_object *obj;
+	struct hw_pmu_info *inf;
+	void __iomem *dev_csr;
+	struct resource res;
+	int enable_bit;
+	int rc;
+
+	ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
+	if (!ctx)
+		return NULL;
+
+	INIT_LIST_HEAD(&resource_list);
+	rc = acpi_dev_get_resources(adev, &resource_list,
+				    acpi_pmu_dev_add_resource, &res);
+	acpi_dev_free_resource_list(&resource_list);
+	if (rc < 0 || IS_ERR(&res)) {
+		dev_err(dev, "PMU type %d: No resource address found\n", type);
+		goto err;
+	}
+
+	dev_csr = devm_ioremap_resource(dev, &res);
+	if (IS_ERR(dev_csr)) {
+		dev_err(dev, "PMU type %d: Fail to map resource\n", type);
+		goto err;
+	}
+
+	/* A PMU device node without enable-bit-index is always enabled */
+	rc = acpi_dev_get_property(adev, "enable-bit-index",
+				   ACPI_TYPE_INTEGER, &obj);
+	if (rc < 0)
+		enable_bit = 0;
+	else
+		enable_bit = (int) obj->integer.value;
+
+	ctx->name = xgene_pmu_dev_name(dev, type, enable_bit);
+	if (!ctx->name) {
+		dev_err(dev, "PMU type %d: Fail to get device name\n", type);
+		goto err;
+	}
+	inf = &ctx->inf;
+	inf->type = type;
+	inf->csr = dev_csr;
+	inf->enable_mask = 1 << enable_bit;
+
+	return ctx;
+err:
+	devm_kfree(dev, ctx);
+	return NULL;
+}
+
+static acpi_status acpi_pmu_dev_add(acpi_handle handle, u32 level,
+				    void *data, void **return_value)
+{
+	struct xgene_pmu *xgene_pmu = data;
+	struct xgene_pmu_dev_ctx *ctx;
+	struct acpi_device *adev;
+
+	if (acpi_bus_get_device(handle, &adev))
+		return AE_OK;
+	if (acpi_bus_get_status(adev) || !adev->status.present)
+		return AE_OK;
+
+	if (!strcmp(acpi_device_hid(adev), "APMC0D5D"))
+		ctx = acpi_get_pmu_hw_inf(xgene_pmu, adev, PMU_TYPE_L3C);
+	else if (!strcmp(acpi_device_hid(adev), "APMC0D5E"))
+		ctx = acpi_get_pmu_hw_inf(xgene_pmu, adev, PMU_TYPE_IOB);
+	else if (!strcmp(acpi_device_hid(adev), "APMC0D5F"))
+		ctx = acpi_get_pmu_hw_inf(xgene_pmu, adev, PMU_TYPE_MCB);
+	else if (!strcmp(acpi_device_hid(adev), "APMC0D60"))
+		ctx = acpi_get_pmu_hw_inf(xgene_pmu, adev, PMU_TYPE_MC);
+	else
+		ctx = NULL;
+
+	if (!ctx)
+		return AE_OK;
+
+	if (xgene_pmu_dev_add(xgene_pmu, ctx)) {
+		/* Can't add the PMU device, skip it */
+		devm_kfree(xgene_pmu->dev, ctx);
+		return AE_OK;
+	}
+
+	switch (ctx->inf.type) {
+	case PMU_TYPE_L3C:
+		list_add(&ctx->next, &xgene_pmu->l3cpmus);
+		break;
+	case PMU_TYPE_IOB:
+		list_add(&ctx->next, &xgene_pmu->iobpmus);
+		break;
+	case PMU_TYPE_MCB:
+		list_add(&ctx->next, &xgene_pmu->mcbpmus);
+		break;
+	case PMU_TYPE_MC:
+		list_add(&ctx->next, &xgene_pmu->mcpmus);
+		break;
+	}
+	return AE_OK;
+}
+
+static int acpi_pmu_probe_pmu_dev(struct xgene_pmu *xgene_pmu,
+				  struct platform_device *pdev)
+{
+	struct device *dev = xgene_pmu->dev;
+	acpi_handle handle;
+	acpi_status status;
+
+	handle = ACPI_HANDLE(dev);
+	if (!handle)
+		return -EINVAL;
+
+	status = acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, 1,
+				     acpi_pmu_dev_add, NULL, xgene_pmu, NULL);
+	if (ACPI_FAILURE(status)) {
+		dev_err(dev, "failed to probe PMU devices\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+#else
+static int acpi_pmu_probe_pmu_dev(struct xgene_pmu *xgene_pmu,
+				  struct platform_device *pdev)
+{
+	return 0;
+}
+#endif
+
+static struct
+xgene_pmu_dev_ctx *fdt_get_pmu_hw_inf(struct xgene_pmu *xgene_pmu,
+				      struct device_node *np, u32 type)
+{
+	struct device *dev = xgene_pmu->dev;
+	struct xgene_pmu_dev_ctx *ctx;
+	struct hw_pmu_info *inf;
+	void __iomem *dev_csr;
+	struct resource res;
+	int enable_bit;
+	int rc;
+
+	ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
+	if (!ctx)
+		return NULL;
+	rc = of_address_to_resource(np, 0, &res);
+	if (rc < 0) {
+		dev_err(dev, "PMU type %d: No resource address found\n", type);
+		goto err;
+	}
+	dev_csr = devm_ioremap_resource(dev, &res);
+	if (IS_ERR(dev_csr)) {
+		dev_err(dev, "PMU type %d: Fail to map resource\n", type);
+		goto err;
+	}
+
+	/* A PMU device node without enable-bit-index is always enabled */
+	if (of_property_read_u32(np, "enable-bit-index", &enable_bit))
+		enable_bit = 0;
+
+	ctx->name = xgene_pmu_dev_name(dev, type, enable_bit);
+	if (!ctx->name) {
+		dev_err(dev, "PMU type %d: Fail to get device name\n", type);
+		goto err;
+	}
+	inf = &ctx->inf;
+	inf->type = type;
+	inf->csr = dev_csr;
+	inf->enable_mask = 1 << enable_bit;
+
+	return ctx;
+err:
+	devm_kfree(dev, ctx);
+	return NULL;
+}
+
+static int fdt_pmu_probe_pmu_dev(struct xgene_pmu *xgene_pmu,
+				 struct platform_device *pdev)
+{
+	struct xgene_pmu_dev_ctx *ctx;
+	struct device_node *np;
+
+	for_each_child_of_node(pdev->dev.of_node, np) {
+		if (!of_device_is_available(np))
+			continue;
+
+		if (of_device_is_compatible(np, "apm,xgene-pmu-l3c"))
+			ctx = fdt_get_pmu_hw_inf(xgene_pmu, np, PMU_TYPE_L3C);
+		else if (of_device_is_compatible(np, "apm,xgene-pmu-iob"))
+			ctx = fdt_get_pmu_hw_inf(xgene_pmu, np, PMU_TYPE_IOB);
+		else if (of_device_is_compatible(np, "apm,xgene-pmu-mcb"))
+			ctx = fdt_get_pmu_hw_inf(xgene_pmu, np, PMU_TYPE_MCB);
+		else if (of_device_is_compatible(np, "apm,xgene-pmu-mc"))
+			ctx = fdt_get_pmu_hw_inf(xgene_pmu, np, PMU_TYPE_MC);
+		else
+			ctx = NULL;
+
+		if (!ctx)
+			continue;
+
+		if (xgene_pmu_dev_add(xgene_pmu, ctx)) {
+			/* Can't add the PMU device, skip it */
+			devm_kfree(xgene_pmu->dev, ctx);
+			continue;
+		}
+
+		switch (ctx->inf.type) {
+		case PMU_TYPE_L3C:
+			list_add(&ctx->next, &xgene_pmu->l3cpmus);
+			break;
+		case PMU_TYPE_IOB:
+			list_add(&ctx->next, &xgene_pmu->iobpmus);
+			break;
+		case PMU_TYPE_MCB:
+			list_add(&ctx->next, &xgene_pmu->mcbpmus);
+			break;
+		case PMU_TYPE_MC:
+			list_add(&ctx->next, &xgene_pmu->mcpmus);
+			break;
+		}
+	}
+
+	return 0;
+}
+
+static int xgene_pmu_probe_pmu_dev(struct xgene_pmu *xgene_pmu,
+				   struct platform_device *pdev)
+{
+	if (has_acpi_companion(&pdev->dev))
+		return acpi_pmu_probe_pmu_dev(xgene_pmu, pdev);
+	return fdt_pmu_probe_pmu_dev(xgene_pmu, pdev);
+}
+
+static const struct xgene_pmu_data xgene_pmu_data = {
+	.id   = PCP_PMU_V1,
+};
+
+static const struct xgene_pmu_data xgene_pmu_v2_data = {
+	.id   = PCP_PMU_V2,
+};
+
+static const struct of_device_id xgene_pmu_of_match[] = {
+	{ .compatible	= "apm,xgene-pmu",	.data = &xgene_pmu_data },
+	{ .compatible	= "apm,xgene-pmu-v2",	.data = &xgene_pmu_v2_data },
+	{},
+};
+MODULE_DEVICE_TABLE(of, xgene_pmu_of_match);
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id xgene_pmu_acpi_match[] = {
+	{"APMC0D5B", PCP_PMU_V1},
+	{"APMC0D5C", PCP_PMU_V2},
+	{},
+};
+MODULE_DEVICE_TABLE(acpi, xgene_pmu_acpi_match);
+#endif
+
+static int xgene_pmu_probe(struct platform_device *pdev)
+{
+	const struct xgene_pmu_data *dev_data;
+	const struct of_device_id *of_id;
+	struct xgene_pmu *xgene_pmu;
+	struct resource *res;
+	int irq, rc;
+	int version;
+
+	xgene_pmu = devm_kzalloc(&pdev->dev, sizeof(*xgene_pmu), GFP_KERNEL);
+	if (!xgene_pmu)
+		return -ENOMEM;
+	xgene_pmu->dev = &pdev->dev;
+	platform_set_drvdata(pdev, xgene_pmu);
+
+	version = -EINVAL;
+	of_id = of_match_device(xgene_pmu_of_match, &pdev->dev);
+	if (of_id) {
+		dev_data = (const struct xgene_pmu_data *) of_id->data;
+		version = dev_data->id;
+	}
+
+#ifdef CONFIG_ACPI
+	if (ACPI_COMPANION(&pdev->dev)) {
+		const struct acpi_device_id *acpi_id;
+
+		acpi_id = acpi_match_device(xgene_pmu_acpi_match, &pdev->dev);
+		if (acpi_id)
+			version = (int) acpi_id->driver_data;
+	}
+#endif
+	if (version < 0)
+		return -ENODEV;
+
+	INIT_LIST_HEAD(&xgene_pmu->l3cpmus);
+	INIT_LIST_HEAD(&xgene_pmu->iobpmus);
+	INIT_LIST_HEAD(&xgene_pmu->mcbpmus);
+	INIT_LIST_HEAD(&xgene_pmu->mcpmus);
+
+	xgene_pmu->version = version;
+	dev_info(&pdev->dev, "X-Gene PMU version %d\n", xgene_pmu->version);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	xgene_pmu->pcppmu_csr = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(xgene_pmu->pcppmu_csr)) {
+		dev_err(&pdev->dev, "ioremap failed for PCP PMU resource\n");
+		rc = PTR_ERR(xgene_pmu->pcppmu_csr);
+		goto err;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "No IRQ resource\n");
+		rc = -EINVAL;
+		goto err;
+	}
+	rc = devm_request_irq(&pdev->dev, irq, xgene_pmu_isr,
+				IRQF_NOBALANCING | IRQF_NO_THREAD,
+				dev_name(&pdev->dev), xgene_pmu);
+	if (rc) {
+		dev_err(&pdev->dev, "Could not request IRQ %d\n", irq);
+		goto err;
+	}
+
+	raw_spin_lock_init(&xgene_pmu->lock);
+
+	/* Check for active MCBs and MCUs */
+	rc = xgene_pmu_probe_active_mcb_mcu(xgene_pmu, pdev);
+	if (rc) {
+		dev_warn(&pdev->dev, "Unknown MCB/MCU active status\n");
+		xgene_pmu->mcb_active_mask = 0x1;
+		xgene_pmu->mc_active_mask = 0x1;
+	}
+
+	/* Pick one core to use for cpumask attributes */
+	cpumask_set_cpu(smp_processor_id(), &xgene_pmu->cpu);
+
+	/* Make sure that the overflow interrupt is handled by this CPU */
+	rc = irq_set_affinity(irq, &xgene_pmu->cpu);
+	if (rc) {
+		dev_err(&pdev->dev, "Failed to set interrupt affinity!\n");
+		goto err;
+	}
+
+	/* Walk through the tree for all PMU perf devices */
+	rc = xgene_pmu_probe_pmu_dev(xgene_pmu, pdev);
+	if (rc) {
+		dev_err(&pdev->dev, "No PMU perf devices found!\n");
+		goto err;
+	}
+
+	/* Enable interrupt */
+	xgene_pmu_unmask_int(xgene_pmu);
+
+	return 0;
+
+err:
+	if (xgene_pmu->pcppmu_csr)
+		devm_iounmap(&pdev->dev, xgene_pmu->pcppmu_csr);
+	devm_kfree(&pdev->dev, xgene_pmu);
+
+	return rc;
+}
+
+static void
+xgene_pmu_dev_cleanup(struct xgene_pmu *xgene_pmu, struct list_head *pmus)
+{
+	struct xgene_pmu_dev_ctx *ctx;
+	struct device *dev = xgene_pmu->dev;
+	struct xgene_pmu_dev *pmu_dev;
+
+	list_for_each_entry(ctx, pmus, next) {
+		pmu_dev = ctx->pmu_dev;
+		if (pmu_dev->inf->csr)
+			devm_iounmap(dev, pmu_dev->inf->csr);
+		devm_kfree(dev, ctx);
+		devm_kfree(dev, pmu_dev);
+	}
+}
+
+static int xgene_pmu_remove(struct platform_device *pdev)
+{
+	struct xgene_pmu *xgene_pmu = dev_get_drvdata(&pdev->dev);
+
+	xgene_pmu_dev_cleanup(xgene_pmu, &xgene_pmu->l3cpmus);
+	xgene_pmu_dev_cleanup(xgene_pmu, &xgene_pmu->iobpmus);
+	xgene_pmu_dev_cleanup(xgene_pmu, &xgene_pmu->mcbpmus);
+	xgene_pmu_dev_cleanup(xgene_pmu, &xgene_pmu->mcpmus);
+
+	if (xgene_pmu->pcppmu_csr)
+		devm_iounmap(&pdev->dev, xgene_pmu->pcppmu_csr);
+	devm_kfree(&pdev->dev, xgene_pmu);
+
+	return 0;
+}
+
+static struct platform_driver xgene_pmu_driver = {
+	.probe = xgene_pmu_probe,
+	.remove = xgene_pmu_remove,
+	.driver = {
+		.name		= "xgene-pmu",
+		.of_match_table = xgene_pmu_of_match,
+		.acpi_match_table = ACPI_PTR(xgene_pmu_acpi_match),
+	},
+};
+
+builtin_platform_driver(xgene_pmu_driver);
diff --git a/drivers/pinctrl/mvebu/pinctrl-orion.c b/drivers/pinctrl/mvebu/pinctrl-orion.c
index 345c3df..84e1441 100644
--- a/drivers/pinctrl/mvebu/pinctrl-orion.c
+++ b/drivers/pinctrl/mvebu/pinctrl-orion.c
@@ -64,11 +64,11 @@
 	return 0;
 }
 
-#define V(f5181l, f5182, f5281) \
-	((f5181l << 0) | (f5182 << 1) | (f5281 << 2))
+#define V(f5181, f5182, f5281) \
+	((f5181 << 0) | (f5182 << 1) | (f5281 << 2))
 
 enum orion_variant {
-	V_5181L = V(1, 0, 0),
+	V_5181  = V(1, 0, 0),
 	V_5182  = V(0, 1, 0),
 	V_5281  = V(0, 0, 1),
 	V_ALL   = V(1, 1, 1),
@@ -103,13 +103,13 @@
 		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_ALL),
 		 MPP_VAR_FUNCTION(0x2, "pci", "req5",       V_ALL),
 		 MPP_VAR_FUNCTION(0x4, "nand", "re0",       V_5182 | V_5281),
-		 MPP_VAR_FUNCTION(0x5, "pci-1", "clk",      V_5181L),
+		 MPP_VAR_FUNCTION(0x5, "pci-1", "clk",      V_5181),
 		 MPP_VAR_FUNCTION(0x5, "sata0", "act",      V_5182)),
 	MPP_MODE(7,
 		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_ALL),
 		 MPP_VAR_FUNCTION(0x2, "pci", "gnt5",       V_ALL),
 		 MPP_VAR_FUNCTION(0x4, "nand", "we0",       V_5182 | V_5281),
-		 MPP_VAR_FUNCTION(0x5, "pci-1", "clk",      V_5181L),
+		 MPP_VAR_FUNCTION(0x5, "pci-1", "clk",      V_5181),
 		 MPP_VAR_FUNCTION(0x5, "sata1", "act",      V_5182)),
 	MPP_MODE(8,
 		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_ALL),
@@ -165,7 +165,7 @@
 	MPP_FUNC_CTRL(0, 19, NULL, orion_mpp_ctrl),
 };
 
-static struct pinctrl_gpio_range mv88f5181l_gpio_ranges[] = {
+static struct pinctrl_gpio_range mv88f5181_gpio_ranges[] = {
 	MPP_GPIO_RANGE(0, 0, 0, 16),
 };
 
@@ -177,14 +177,14 @@
 	MPP_GPIO_RANGE(0, 0, 0, 16),
 };
 
-static struct mvebu_pinctrl_soc_info mv88f5181l_info = {
-	.variant = V_5181L,
+static struct mvebu_pinctrl_soc_info mv88f5181_info = {
+	.variant = V_5181,
 	.controls = orion_mpp_controls,
 	.ncontrols = ARRAY_SIZE(orion_mpp_controls),
 	.modes = orion_mpp_modes,
 	.nmodes = ARRAY_SIZE(orion_mpp_modes),
-	.gpioranges = mv88f5181l_gpio_ranges,
-	.ngpioranges = ARRAY_SIZE(mv88f5181l_gpio_ranges),
+	.gpioranges = mv88f5181_gpio_ranges,
+	.ngpioranges = ARRAY_SIZE(mv88f5181_gpio_ranges),
 };
 
 static struct mvebu_pinctrl_soc_info mv88f5182_info = {
@@ -212,7 +212,8 @@
  * muxing, they are identical.
  */
 static const struct of_device_id orion_pinctrl_of_match[] = {
-	{ .compatible = "marvell,88f5181l-pinctrl", .data = &mv88f5181l_info },
+	{ .compatible = "marvell,88f5181-pinctrl", .data = &mv88f5181_info },
+	{ .compatible = "marvell,88f5181l-pinctrl", .data = &mv88f5181_info },
 	{ .compatible = "marvell,88f5182-pinctrl", .data = &mv88f5182_info },
 	{ .compatible = "marvell,88f5281-pinctrl", .data = &mv88f5281_info },
 	{ }
diff --git a/drivers/ps3/ps3-vuart.c b/drivers/ps3/ps3-vuart.c
index 632701a..b7f300b 100644
--- a/drivers/ps3/ps3-vuart.c
+++ b/drivers/ps3/ps3-vuart.c
@@ -958,7 +958,7 @@
 
 fail_request_irq:
 	ps3_vuart_irq_destroy(vuart_bus_priv.virq);
-	vuart_bus_priv.virq = NO_IRQ;
+	vuart_bus_priv.virq = 0;
 fail_alloc_irq:
 	kfree(vuart_bus_priv.bmp);
 	vuart_bus_priv.bmp = NULL;
@@ -982,7 +982,7 @@
 	free_irq(vuart_bus_priv.virq, &vuart_bus_priv);
 
 	ps3_vuart_irq_destroy(vuart_bus_priv.virq);
-	vuart_bus_priv.virq = NO_IRQ;
+	vuart_bus_priv.virq = 0;
 
 	kfree(vuart_bus_priv.bmp);
 	vuart_bus_priv.bmp = NULL;
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index 4be1b8c..06d9fa2 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -14,9 +14,58 @@
 
 if RESET_CONTROLLER
 
+config RESET_ATH79
+	bool "AR71xx Reset Driver" if COMPILE_TEST
+	default ATH79
+	help
+	  This enables the ATH79 reset controller driver that supports the
+	  AR71xx SoC reset controller.
+
+config RESET_BERLIN
+	bool "Berlin Reset Driver" if COMPILE_TEST
+	default ARCH_BERLIN
+	help
+	  This enables the reset controller driver for Marvell Berlin SoCs.
+
+config RESET_LPC18XX
+	bool "LPC18xx/43xx Reset Driver" if COMPILE_TEST
+	default ARCH_LPC18XX
+	help
+	  This enables the reset controller driver for NXP LPC18xx/43xx SoCs.
+
+config RESET_MESON
+	bool "Meson Reset Driver" if COMPILE_TEST
+	default ARCH_MESON
+	help
+	  This enables the reset driver for Amlogic Meson SoCs.
+
 config RESET_OXNAS
 	bool
 
+config RESET_PISTACHIO
+	bool "Pistachio Reset Driver" if COMPILE_TEST
+	default MACH_PISTACHIO
+	help
+	  This enables the reset driver for ImgTec Pistachio SoCs.
+
+config RESET_SOCFPGA
+	bool "SoCFPGA Reset Driver" if COMPILE_TEST
+	default ARCH_SOCFPGA
+	help
+	  This enables the reset controller driver for Altera SoCFPGAs.
+
+config RESET_STM32
+	bool "STM32 Reset Driver" if COMPILE_TEST
+	default ARCH_STM32
+	help
+	  This enables the RCC reset controller driver for STM32 MCUs.
+
+config RESET_SUNXI
+	bool "Allwinner SoCs Reset Driver" if COMPILE_TEST && !ARCH_SUNXI
+	default ARCH_SUNXI
+	help
+	  This enables the reset driver for Allwinner SoCs.
+
 config TI_SYSCON_RESET
 	tristate "TI SYSCON Reset Driver"
 	depends on HAS_IOMEM
@@ -27,6 +76,22 @@
 	  you wish to use the reset framework for such memory-mapped devices,
 	  say Y here. Otherwise, say N.
 
+config RESET_UNIPHIER
+	tristate "Reset controller driver for UniPhier SoCs"
+	depends on ARCH_UNIPHIER || COMPILE_TEST
+	depends on OF && MFD_SYSCON
+	default ARCH_UNIPHIER
+	help
+	  Support for reset controllers on UniPhier SoCs.
+	  Say Y if you want to control reset signals provided by System Control
+	  block, Media I/O block, Peripheral Block.
+
+config RESET_ZYNQ
+	bool "ZYNQ Reset Driver" if COMPILE_TEST
+	default ARCH_ZYNQ
+	help
+	  This enables the reset controller driver for Xilinx Zynq SoCs.
+
 source "drivers/reset/sti/Kconfig"
 source "drivers/reset/hisilicon/Kconfig"
 
diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index 5d65a93..bbe7026 100644
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -1,13 +1,15 @@
 obj-y += core.o
-obj-$(CONFIG_ARCH_LPC18XX) += reset-lpc18xx.o
-obj-$(CONFIG_ARCH_SOCFPGA) += reset-socfpga.o
-obj-$(CONFIG_ARCH_BERLIN) += reset-berlin.o
-obj-$(CONFIG_MACH_PISTACHIO) += reset-pistachio.o
-obj-$(CONFIG_ARCH_MESON) += reset-meson.o
-obj-$(CONFIG_ARCH_SUNXI) += reset-sunxi.o
+obj-y += hisilicon/
 obj-$(CONFIG_ARCH_STI) += sti/
-obj-$(CONFIG_ARCH_HISI) += hisilicon/
-obj-$(CONFIG_ARCH_ZYNQ) += reset-zynq.o
-obj-$(CONFIG_ATH79) += reset-ath79.o
+obj-$(CONFIG_RESET_ATH79) += reset-ath79.o
+obj-$(CONFIG_RESET_BERLIN) += reset-berlin.o
+obj-$(CONFIG_RESET_LPC18XX) += reset-lpc18xx.o
+obj-$(CONFIG_RESET_MESON) += reset-meson.o
 obj-$(CONFIG_RESET_OXNAS) += reset-oxnas.o
+obj-$(CONFIG_RESET_PISTACHIO) += reset-pistachio.o
+obj-$(CONFIG_RESET_SOCFPGA) += reset-socfpga.o
+obj-$(CONFIG_RESET_STM32) += reset-stm32.o
+obj-$(CONFIG_RESET_SUNXI) += reset-sunxi.o
 obj-$(CONFIG_TI_SYSCON_RESET) += reset-ti-syscon.o
+obj-$(CONFIG_RESET_UNIPHIER) += reset-uniphier.o
+obj-$(CONFIG_RESET_ZYNQ) += reset-zynq.o
diff --git a/drivers/reset/core.c b/drivers/reset/core.c
index 395dc9c..b8ae1db 100644
--- a/drivers/reset/core.c
+++ b/drivers/reset/core.c
@@ -138,7 +138,8 @@
  */
 int reset_control_reset(struct reset_control *rstc)
 {
-	if (WARN_ON(rstc->shared))
+	if (WARN_ON(IS_ERR_OR_NULL(rstc)) ||
+	    WARN_ON(rstc->shared))
 		return -EINVAL;
 
 	if (rstc->rcdev->ops->reset)
@@ -161,6 +162,9 @@
  */
 int reset_control_assert(struct reset_control *rstc)
 {
+	if (WARN_ON(IS_ERR_OR_NULL(rstc)))
+		return -EINVAL;
+
 	if (!rstc->rcdev->ops->assert)
 		return -ENOTSUPP;
 
@@ -184,6 +188,9 @@
  */
 int reset_control_deassert(struct reset_control *rstc)
 {
+	if (WARN_ON(IS_ERR_OR_NULL(rstc)))
+		return -EINVAL;
+
 	if (!rstc->rcdev->ops->deassert)
 		return -ENOTSUPP;
 
@@ -204,6 +211,9 @@
  */
 int reset_control_status(struct reset_control *rstc)
 {
+	if (WARN_ON(IS_ERR_OR_NULL(rstc)))
+		return -EINVAL;
+
 	if (rstc->rcdev->ops->status)
 		return rstc->rcdev->ops->status(rstc->rcdev, rstc->id);
 
diff --git a/drivers/reset/hisilicon/Kconfig b/drivers/reset/hisilicon/Kconfig
index 26bf95a..1ff8b0c 100644
--- a/drivers/reset/hisilicon/Kconfig
+++ b/drivers/reset/hisilicon/Kconfig
@@ -1,5 +1,6 @@
 config COMMON_RESET_HI6220
 	tristate "Hi6220 Reset Driver"
-	depends on (ARCH_HISI && RESET_CONTROLLER)
+	depends on ARCH_HISI || COMPILE_TEST
+	default ARCH_HISI
 	help
 	  Build the Hisilicon Hi6220 reset driver.
diff --git a/drivers/reset/reset-ath79.c b/drivers/reset/reset-ath79.c
index 16d410c..6b97631 100644
--- a/drivers/reset/reset-ath79.c
+++ b/drivers/reset/reset-ath79.c
@@ -12,6 +12,7 @@
  * GNU General Public License for more details.
  */
 
+#include <linux/io.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/reset-controller.h>
diff --git a/drivers/reset/reset-socfpga.c b/drivers/reset/reset-socfpga.c
index 12add9b..78ebf84 100644
--- a/drivers/reset/reset-socfpga.c
+++ b/drivers/reset/reset-socfpga.c
@@ -28,7 +28,6 @@
 struct socfpga_reset_data {
 	spinlock_t			lock;
 	void __iomem			*membase;
-	u32				modrst_offset;
 	struct reset_controller_dev	rcdev;
 };
 
@@ -45,9 +44,8 @@
 
 	spin_lock_irqsave(&data->lock, flags);
 
-	reg = readl(data->membase + data->modrst_offset + (bank * NR_BANKS));
-	writel(reg | BIT(offset), data->membase + data->modrst_offset +
-				 (bank * NR_BANKS));
+	reg = readl(data->membase + (bank * NR_BANKS));
+	writel(reg | BIT(offset), data->membase + (bank * NR_BANKS));
 	spin_unlock_irqrestore(&data->lock, flags);
 
 	return 0;
@@ -67,9 +65,8 @@
 
 	spin_lock_irqsave(&data->lock, flags);
 
-	reg = readl(data->membase + data->modrst_offset + (bank * NR_BANKS));
-	writel(reg & ~BIT(offset), data->membase + data->modrst_offset +
-				  (bank * NR_BANKS));
+	reg = readl(data->membase + (bank * NR_BANKS));
+	writel(reg & ~BIT(offset), data->membase + (bank * NR_BANKS));
 
 	spin_unlock_irqrestore(&data->lock, flags);
 
@@ -85,7 +82,7 @@
 	int offset = id % BITS_PER_LONG;
 	u32 reg;
 
-	reg = readl(data->membase + data->modrst_offset + (bank * NR_BANKS));
+	reg = readl(data->membase + (bank * NR_BANKS));
 
 	return !(reg & BIT(offset));
 }
@@ -102,6 +99,7 @@
 	struct resource *res;
 	struct device *dev = &pdev->dev;
 	struct device_node *np = dev->of_node;
+	u32 modrst_offset;
 
 	/*
 	 * The binding was mainlined without the required property.
@@ -122,10 +120,11 @@
 	if (IS_ERR(data->membase))
 		return PTR_ERR(data->membase);
 
-	if (of_property_read_u32(np, "altr,modrst-offset", &data->modrst_offset)) {
+	if (of_property_read_u32(np, "altr,modrst-offset", &modrst_offset)) {
 		dev_warn(dev, "missing altr,modrst-offset property, assuming 0x10!\n");
-		data->modrst_offset = 0x10;
+		modrst_offset = 0x10;
 	}
+	data->membase += modrst_offset;
 
 	spin_lock_init(&data->lock);
 
diff --git a/drivers/reset/reset-stm32.c b/drivers/reset/reset-stm32.c
new file mode 100644
index 0000000..3a7c8527
--- /dev/null
+++ b/drivers/reset/reset-stm32.c
@@ -0,0 +1,108 @@
+/*
+ * Copyright (C) Maxime Coquelin 2015
+ * Author:  Maxime Coquelin <mcoquelin.stm32@gmail.com>
+ * License terms:  GNU General Public License (GPL), version 2
+ *
+ * Heavily based on sunxi driver from Maxime Ripard.
+ */
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+
+struct stm32_reset_data {
+	spinlock_t			lock;
+	void __iomem			*membase;
+	struct reset_controller_dev	rcdev;
+};
+
+static int stm32_reset_assert(struct reset_controller_dev *rcdev,
+			      unsigned long id)
+{
+	struct stm32_reset_data *data = container_of(rcdev,
+						     struct stm32_reset_data,
+						     rcdev);
+	int bank = id / BITS_PER_LONG;
+	int offset = id % BITS_PER_LONG;
+	unsigned long flags;
+	u32 reg;
+
+	spin_lock_irqsave(&data->lock, flags);
+
+	reg = readl(data->membase + (bank * 4));
+	writel(reg | BIT(offset), data->membase + (bank * 4));
+
+	spin_unlock_irqrestore(&data->lock, flags);
+
+	return 0;
+}
+
+static int stm32_reset_deassert(struct reset_controller_dev *rcdev,
+				unsigned long id)
+{
+	struct stm32_reset_data *data = container_of(rcdev,
+						     struct stm32_reset_data,
+						     rcdev);
+	int bank = id / BITS_PER_LONG;
+	int offset = id % BITS_PER_LONG;
+	unsigned long flags;
+	u32 reg;
+
+	spin_lock_irqsave(&data->lock, flags);
+
+	reg = readl(data->membase + (bank * 4));
+	writel(reg & ~BIT(offset), data->membase + (bank * 4));
+
+	spin_unlock_irqrestore(&data->lock, flags);
+
+	return 0;
+}
+
+static const struct reset_control_ops stm32_reset_ops = {
+	.assert		= stm32_reset_assert,
+	.deassert	= stm32_reset_deassert,
+};
+
+static const struct of_device_id stm32_reset_dt_ids[] = {
+	 { .compatible = "st,stm32-rcc", },
+	 { /* sentinel */ },
+};
+
+static int stm32_reset_probe(struct platform_device *pdev)
+{
+	struct stm32_reset_data *data;
+	struct resource *res;
+
+	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	data->membase = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(data->membase))
+		return PTR_ERR(data->membase);
+
+	spin_lock_init(&data->lock);
+
+	data->rcdev.owner = THIS_MODULE;
+	data->rcdev.nr_resets = resource_size(res) * 8;
+	data->rcdev.ops = &stm32_reset_ops;
+	data->rcdev.of_node = pdev->dev.of_node;
+
+	return devm_reset_controller_register(&pdev->dev, &data->rcdev);
+}
+
+static struct platform_driver stm32_reset_driver = {
+	.probe	= stm32_reset_probe,
+	.driver = {
+		.name		= "stm32-rcc-reset",
+		.of_match_table	= stm32_reset_dt_ids,
+	},
+};
+builtin_platform_driver(stm32_reset_driver);
diff --git a/drivers/reset/reset-uniphier.c b/drivers/reset/reset-uniphier.c
new file mode 100644
index 0000000..8b2558e
--- /dev/null
+++ b/drivers/reset/reset-uniphier.c
@@ -0,0 +1,440 @@
+/*
+ * Copyright (C) 2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/reset-controller.h>
+
+struct uniphier_reset_data {
+	unsigned int id;
+	unsigned int reg;
+	unsigned int bit;
+	unsigned int flags;
+#define UNIPHIER_RESET_ACTIVE_LOW		BIT(0)
+};
+
+#define UNIPHIER_RESET_ID_END		(unsigned int)(-1)
+
+#define UNIPHIER_RESET_END				\
+	{ .id = UNIPHIER_RESET_ID_END }
+
+#define UNIPHIER_RESET(_id, _reg, _bit)			\
+	{						\
+		.id = (_id),				\
+		.reg = (_reg),				\
+		.bit = (_bit),				\
+	}
+
+#define UNIPHIER_RESETX(_id, _reg, _bit)		\
+	{						\
+		.id = (_id),				\
+		.reg = (_reg),				\
+		.bit = (_bit),				\
+		.flags = UNIPHIER_RESET_ACTIVE_LOW,	\
+	}
+
+/* System reset data */
+#define UNIPHIER_SLD3_SYS_RESET_STDMAC(id)		\
+	UNIPHIER_RESETX((id), 0x2000, 10)
+
+#define UNIPHIER_LD11_SYS_RESET_STDMAC(id)		\
+	UNIPHIER_RESETX((id), 0x200c, 8)
+
+#define UNIPHIER_PRO4_SYS_RESET_GIO(id)			\
+	UNIPHIER_RESETX((id), 0x2000, 6)
+
+#define UNIPHIER_LD20_SYS_RESET_GIO(id)			\
+	UNIPHIER_RESETX((id), 0x200c, 5)
+
+#define UNIPHIER_PRO4_SYS_RESET_USB3(id, ch)		\
+	UNIPHIER_RESETX((id), 0x2000 + 0x4 * (ch), 17)
+
+const struct uniphier_reset_data uniphier_sld3_sys_reset_data[] = {
+	UNIPHIER_SLD3_SYS_RESET_STDMAC(8),	/* Ether, HSC, MIO */
+	UNIPHIER_RESET_END,
+};
+
+const struct uniphier_reset_data uniphier_pro4_sys_reset_data[] = {
+	UNIPHIER_SLD3_SYS_RESET_STDMAC(8),	/* HSC, MIO, RLE */
+	UNIPHIER_PRO4_SYS_RESET_GIO(12),	/* Ether, SATA, USB3 */
+	UNIPHIER_PRO4_SYS_RESET_USB3(14, 0),
+	UNIPHIER_PRO4_SYS_RESET_USB3(15, 1),
+	UNIPHIER_RESET_END,
+};
+
+const struct uniphier_reset_data uniphier_pro5_sys_reset_data[] = {
+	UNIPHIER_SLD3_SYS_RESET_STDMAC(8),	/* HSC */
+	UNIPHIER_PRO4_SYS_RESET_GIO(12),	/* PCIe, USB3 */
+	UNIPHIER_PRO4_SYS_RESET_USB3(14, 0),
+	UNIPHIER_PRO4_SYS_RESET_USB3(15, 1),
+	UNIPHIER_RESET_END,
+};
+
+const struct uniphier_reset_data uniphier_pxs2_sys_reset_data[] = {
+	UNIPHIER_SLD3_SYS_RESET_STDMAC(8),	/* HSC, RLE */
+	UNIPHIER_PRO4_SYS_RESET_USB3(14, 0),
+	UNIPHIER_PRO4_SYS_RESET_USB3(15, 1),
+	UNIPHIER_RESETX(16, 0x2014, 4),		/* USB30-PHY0 */
+	UNIPHIER_RESETX(17, 0x2014, 0),		/* USB30-PHY1 */
+	UNIPHIER_RESETX(18, 0x2014, 2),		/* USB30-PHY2 */
+	UNIPHIER_RESETX(20, 0x2014, 5),		/* USB31-PHY0 */
+	UNIPHIER_RESETX(21, 0x2014, 1),		/* USB31-PHY1 */
+	UNIPHIER_RESETX(28, 0x2014, 12),	/* SATA */
+	UNIPHIER_RESET(29, 0x2014, 8),		/* SATA-PHY (active high) */
+	UNIPHIER_RESET_END,
+};
+
+const struct uniphier_reset_data uniphier_ld11_sys_reset_data[] = {
+	UNIPHIER_LD11_SYS_RESET_STDMAC(8),	/* HSC, MIO */
+	UNIPHIER_RESET_END,
+};
+
+const struct uniphier_reset_data uniphier_ld20_sys_reset_data[] = {
+	UNIPHIER_LD11_SYS_RESET_STDMAC(8),	/* HSC */
+	UNIPHIER_LD20_SYS_RESET_GIO(12),	/* PCIe, USB3 */
+	UNIPHIER_RESETX(16, 0x200c, 12),	/* USB30-PHY0 */
+	UNIPHIER_RESETX(17, 0x200c, 13),	/* USB30-PHY1 */
+	UNIPHIER_RESETX(18, 0x200c, 14),	/* USB30-PHY2 */
+	UNIPHIER_RESETX(19, 0x200c, 15),	/* USB30-PHY3 */
+	UNIPHIER_RESET_END,
+};
+
+/* Media I/O reset data */
+#define UNIPHIER_MIO_RESET_SD(id, ch)			\
+	UNIPHIER_RESETX((id), 0x110 + 0x200 * (ch), 0)
+
+#define UNIPHIER_MIO_RESET_SD_BRIDGE(id, ch)		\
+	UNIPHIER_RESETX((id), 0x110 + 0x200 * (ch), 26)
+
+#define UNIPHIER_MIO_RESET_EMMC_HW_RESET(id, ch)	\
+	UNIPHIER_RESETX((id), 0x80 + 0x200 * (ch), 0)
+
+#define UNIPHIER_MIO_RESET_USB2(id, ch)			\
+	UNIPHIER_RESETX((id), 0x114 + 0x200 * (ch), 0)
+
+#define UNIPHIER_MIO_RESET_USB2_BRIDGE(id, ch)		\
+	UNIPHIER_RESETX((id), 0x110 + 0x200 * (ch), 24)
+
+#define UNIPHIER_MIO_RESET_DMAC(id)			\
+	UNIPHIER_RESETX((id), 0x110, 17)
+
+const struct uniphier_reset_data uniphier_sld3_mio_reset_data[] = {
+	UNIPHIER_MIO_RESET_SD(0, 0),
+	UNIPHIER_MIO_RESET_SD(1, 1),
+	UNIPHIER_MIO_RESET_SD(2, 2),
+	UNIPHIER_MIO_RESET_SD_BRIDGE(3, 0),
+	UNIPHIER_MIO_RESET_SD_BRIDGE(4, 1),
+	UNIPHIER_MIO_RESET_SD_BRIDGE(5, 2),
+	UNIPHIER_MIO_RESET_EMMC_HW_RESET(6, 1),
+	UNIPHIER_MIO_RESET_DMAC(7),
+	UNIPHIER_MIO_RESET_USB2(8, 0),
+	UNIPHIER_MIO_RESET_USB2(9, 1),
+	UNIPHIER_MIO_RESET_USB2(10, 2),
+	UNIPHIER_MIO_RESET_USB2(11, 3),
+	UNIPHIER_MIO_RESET_USB2_BRIDGE(12, 0),
+	UNIPHIER_MIO_RESET_USB2_BRIDGE(13, 1),
+	UNIPHIER_MIO_RESET_USB2_BRIDGE(14, 2),
+	UNIPHIER_MIO_RESET_USB2_BRIDGE(15, 3),
+	UNIPHIER_RESET_END,
+};
+
+const struct uniphier_reset_data uniphier_pro5_mio_reset_data[] = {
+	UNIPHIER_MIO_RESET_SD(0, 0),
+	UNIPHIER_MIO_RESET_SD(1, 1),
+	UNIPHIER_MIO_RESET_EMMC_HW_RESET(6, 1),
+	UNIPHIER_RESET_END,
+};
+
+/* Peripheral reset data */
+#define UNIPHIER_PERI_RESET_UART(id, ch)		\
+	UNIPHIER_RESETX((id), 0x114, 19 + (ch))
+
+#define UNIPHIER_PERI_RESET_I2C(id, ch)			\
+	UNIPHIER_RESETX((id), 0x114, 5 + (ch))
+
+#define UNIPHIER_PERI_RESET_FI2C(id, ch)		\
+	UNIPHIER_RESETX((id), 0x114, 24 + (ch))
+
+const struct uniphier_reset_data uniphier_ld4_peri_reset_data[] = {
+	UNIPHIER_PERI_RESET_UART(0, 0),
+	UNIPHIER_PERI_RESET_UART(1, 1),
+	UNIPHIER_PERI_RESET_UART(2, 2),
+	UNIPHIER_PERI_RESET_UART(3, 3),
+	UNIPHIER_PERI_RESET_I2C(4, 0),
+	UNIPHIER_PERI_RESET_I2C(5, 1),
+	UNIPHIER_PERI_RESET_I2C(6, 2),
+	UNIPHIER_PERI_RESET_I2C(7, 3),
+	UNIPHIER_PERI_RESET_I2C(8, 4),
+	UNIPHIER_RESET_END,
+};
+
+const struct uniphier_reset_data uniphier_pro4_peri_reset_data[] = {
+	UNIPHIER_PERI_RESET_UART(0, 0),
+	UNIPHIER_PERI_RESET_UART(1, 1),
+	UNIPHIER_PERI_RESET_UART(2, 2),
+	UNIPHIER_PERI_RESET_UART(3, 3),
+	UNIPHIER_PERI_RESET_FI2C(4, 0),
+	UNIPHIER_PERI_RESET_FI2C(5, 1),
+	UNIPHIER_PERI_RESET_FI2C(6, 2),
+	UNIPHIER_PERI_RESET_FI2C(7, 3),
+	UNIPHIER_PERI_RESET_FI2C(8, 4),
+	UNIPHIER_PERI_RESET_FI2C(9, 5),
+	UNIPHIER_PERI_RESET_FI2C(10, 6),
+	UNIPHIER_RESET_END,
+};
+
+/* core implementaton */
+struct uniphier_reset_priv {
+	struct reset_controller_dev rcdev;
+	struct device *dev;
+	struct regmap *regmap;
+	const struct uniphier_reset_data *data;
+};
+
+#define to_uniphier_reset_priv(_rcdev) \
+			container_of(_rcdev, struct uniphier_reset_priv, rcdev)
+
+static int uniphier_reset_update(struct reset_controller_dev *rcdev,
+				 unsigned long id, int assert)
+{
+	struct uniphier_reset_priv *priv = to_uniphier_reset_priv(rcdev);
+	const struct uniphier_reset_data *p;
+
+	for (p = priv->data; p->id != UNIPHIER_RESET_ID_END; p++) {
+		unsigned int mask, val;
+
+		if (p->id != id)
+			continue;
+
+		mask = BIT(p->bit);
+
+		if (assert)
+			val = mask;
+		else
+			val = ~mask;
+
+		if (p->flags & UNIPHIER_RESET_ACTIVE_LOW)
+			val = ~val;
+
+		return regmap_write_bits(priv->regmap, p->reg, mask, val);
+	}
+
+	dev_err(priv->dev, "reset_id=%lu was not handled\n", id);
+	return -EINVAL;
+}
+
+static int uniphier_reset_assert(struct reset_controller_dev *rcdev,
+				 unsigned long id)
+{
+	return uniphier_reset_update(rcdev, id, 1);
+}
+
+static int uniphier_reset_deassert(struct reset_controller_dev *rcdev,
+				   unsigned long id)
+{
+	return uniphier_reset_update(rcdev, id, 0);
+}
+
+static int uniphier_reset_status(struct reset_controller_dev *rcdev,
+				 unsigned long id)
+{
+	struct uniphier_reset_priv *priv = to_uniphier_reset_priv(rcdev);
+	const struct uniphier_reset_data *p;
+
+	for (p = priv->data; p->id != UNIPHIER_RESET_ID_END; p++) {
+		unsigned int val;
+		int ret, asserted;
+
+		if (p->id != id)
+			continue;
+
+		ret = regmap_read(priv->regmap, p->reg, &val);
+		if (ret)
+			return ret;
+
+		asserted = !!(val & BIT(p->bit));
+
+		if (p->flags & UNIPHIER_RESET_ACTIVE_LOW)
+			asserted = !asserted;
+
+		return asserted;
+	}
+
+	dev_err(priv->dev, "reset_id=%lu was not found\n", id);
+	return -EINVAL;
+}
+
+static const struct reset_control_ops uniphier_reset_ops = {
+	.assert = uniphier_reset_assert,
+	.deassert = uniphier_reset_deassert,
+	.status = uniphier_reset_status,
+};
+
+static int uniphier_reset_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct uniphier_reset_priv *priv;
+	const struct uniphier_reset_data *p, *data;
+	struct regmap *regmap;
+	struct device_node *parent;
+	unsigned int nr_resets = 0;
+
+	data = of_device_get_match_data(dev);
+	if (WARN_ON(!data))
+		return -EINVAL;
+
+	parent = of_get_parent(dev->of_node); /* parent should be syscon node */
+	regmap = syscon_node_to_regmap(parent);
+	of_node_put(parent);
+	if (IS_ERR(regmap)) {
+		dev_err(dev, "failed to get regmap (error %ld)\n",
+			PTR_ERR(regmap));
+		return PTR_ERR(regmap);
+	}
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	for (p = data; p->id != UNIPHIER_RESET_ID_END; p++)
+		nr_resets = max(nr_resets, p->id + 1);
+
+	priv->rcdev.ops = &uniphier_reset_ops;
+	priv->rcdev.owner = dev->driver->owner;
+	priv->rcdev.of_node = dev->of_node;
+	priv->rcdev.nr_resets = nr_resets;
+	priv->dev = dev;
+	priv->regmap = regmap;
+	priv->data = data;
+
+	return devm_reset_controller_register(&pdev->dev, &priv->rcdev);
+}
+
+static const struct of_device_id uniphier_reset_match[] = {
+	/* System reset */
+	{
+		.compatible = "socionext,uniphier-sld3-reset",
+		.data = uniphier_sld3_sys_reset_data,
+	},
+	{
+		.compatible = "socionext,uniphier-ld4-reset",
+		.data = uniphier_sld3_sys_reset_data,
+	},
+	{
+		.compatible = "socionext,uniphier-pro4-reset",
+		.data = uniphier_pro4_sys_reset_data,
+	},
+	{
+		.compatible = "socionext,uniphier-sld8-reset",
+		.data = uniphier_sld3_sys_reset_data,
+	},
+	{
+		.compatible = "socionext,uniphier-pro5-reset",
+		.data = uniphier_pro5_sys_reset_data,
+	},
+	{
+		.compatible = "socionext,uniphier-pxs2-reset",
+		.data = uniphier_pxs2_sys_reset_data,
+	},
+	{
+		.compatible = "socionext,uniphier-ld11-reset",
+		.data = uniphier_ld11_sys_reset_data,
+	},
+	{
+		.compatible = "socionext,uniphier-ld20-reset",
+		.data = uniphier_ld20_sys_reset_data,
+	},
+	/* Media I/O reset */
+	{
+		.compatible = "socionext,uniphier-sld3-mio-reset",
+		.data = uniphier_sld3_mio_reset_data,
+	},
+	{
+		.compatible = "socionext,uniphier-ld4-mio-reset",
+		.data = uniphier_sld3_mio_reset_data,
+	},
+	{
+		.compatible = "socionext,uniphier-pro4-mio-reset",
+		.data = uniphier_sld3_mio_reset_data,
+	},
+	{
+		.compatible = "socionext,uniphier-sld8-mio-reset",
+		.data = uniphier_sld3_mio_reset_data,
+	},
+	{
+		.compatible = "socionext,uniphier-pro5-mio-reset",
+		.data = uniphier_pro5_mio_reset_data,
+	},
+	{
+		.compatible = "socionext,uniphier-pxs2-mio-reset",
+		.data = uniphier_pro5_mio_reset_data,
+	},
+	{
+		.compatible = "socionext,uniphier-ld11-mio-reset",
+		.data = uniphier_sld3_mio_reset_data,
+	},
+	{
+		.compatible = "socionext,uniphier-ld20-mio-reset",
+		.data = uniphier_pro5_mio_reset_data,
+	},
+	/* Peripheral reset */
+	{
+		.compatible = "socionext,uniphier-ld4-peri-reset",
+		.data = uniphier_ld4_peri_reset_data,
+	},
+	{
+		.compatible = "socionext,uniphier-pro4-peri-reset",
+		.data = uniphier_pro4_peri_reset_data,
+	},
+	{
+		.compatible = "socionext,uniphier-sld8-peri-reset",
+		.data = uniphier_ld4_peri_reset_data,
+	},
+	{
+		.compatible = "socionext,uniphier-pro5-peri-reset",
+		.data = uniphier_pro4_peri_reset_data,
+	},
+	{
+		.compatible = "socionext,uniphier-pxs2-peri-reset",
+		.data = uniphier_pro4_peri_reset_data,
+	},
+	{
+		.compatible = "socionext,uniphier-ld11-peri-reset",
+		.data = uniphier_pro4_peri_reset_data,
+	},
+	{
+		.compatible = "socionext,uniphier-ld20-peri-reset",
+		.data = uniphier_pro4_peri_reset_data,
+	},
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, uniphier_reset_match);
+
+static struct platform_driver uniphier_reset_driver = {
+	.probe = uniphier_reset_probe,
+	.driver = {
+		.name = "uniphier-reset",
+		.of_match_table = uniphier_reset_match,
+	},
+};
+module_platform_driver(uniphier_reset_driver);
+
+MODULE_AUTHOR("Masahiro Yamada <yamada.masahiro@socionext.com>");
+MODULE_DESCRIPTION("UniPhier Reset Controller Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/soc/mediatek/mtk-pmic-wrap.c b/drivers/soc/mediatek/mtk-pmic-wrap.c
index a003ba2..a5f1093 100644
--- a/drivers/soc/mediatek/mtk-pmic-wrap.c
+++ b/drivers/soc/mediatek/mtk-pmic-wrap.c
@@ -583,7 +583,7 @@
 {
 	unsigned long timeout;
 
-	timeout = jiffies + usecs_to_jiffies(255);
+	timeout = jiffies + usecs_to_jiffies(10000);
 
 	do {
 		if (time_after(jiffies, timeout))
diff --git a/drivers/soc/qcom/smd.c b/drivers/soc/qcom/smd.c
index ac1957d..322034a 100644
--- a/drivers/soc/qcom/smd.c
+++ b/drivers/soc/qcom/smd.c
@@ -95,7 +95,7 @@
 
 /**
  * struct qcom_smd_edge - representing a remote processor
- * @smd:		handle to qcom_smd
+ * @dev:		device for this edge
  * @of_node:		of_node handle for information related to this edge
  * @edge_id:		identifier of this edge
  * @remote_pid:		identifier of remote processor
@@ -111,7 +111,8 @@
  * @state_work:		work item for edge state changes
  */
 struct qcom_smd_edge {
-	struct qcom_smd *smd;
+	struct device dev;
+
 	struct device_node *of_node;
 	unsigned edge_id;
 	unsigned remote_pid;
@@ -135,6 +136,8 @@
 	struct work_struct state_work;
 };
 
+#define to_smd_edge(d) container_of(d, struct qcom_smd_edge, dev)
+
 /*
  * SMD channel states.
  */
@@ -197,20 +200,6 @@
 	void *drvdata;
 
 	struct list_head list;
-	struct list_head dev_list;
-};
-
-/**
- * struct qcom_smd - smd struct
- * @dev:	device struct
- * @num_edges:	number of entries in @edges
- * @edges:	array of edges to be handled
- */
-struct qcom_smd {
-	struct device *dev;
-
-	unsigned num_edges;
-	struct qcom_smd_edge edges[0];
 };
 
 /*
@@ -374,7 +363,7 @@
 	SET_TX_CHANNEL_FLAG(channel, fSTATE, 1);
 	SET_TX_CHANNEL_FLAG(channel, fBLOCKREADINTR, 1);
 	SET_TX_CHANNEL_INFO(channel, head, 0);
-	SET_TX_CHANNEL_INFO(channel, tail, 0);
+	SET_RX_CHANNEL_INFO(channel, tail, 0);
 
 	qcom_smd_signal_channel(channel);
 
@@ -421,7 +410,7 @@
 	if (channel->state == state)
 		return;
 
-	dev_dbg(edge->smd->dev, "set_state(%s, %d)\n", channel->name, state);
+	dev_dbg(&edge->dev, "set_state(%s, %d)\n", channel->name, state);
 
 	SET_TX_CHANNEL_FLAG(channel, fDSR, is_open);
 	SET_TX_CHANNEL_FLAG(channel, fCTS, is_open);
@@ -891,8 +880,6 @@
 	struct qcom_smd_device *qsdev = to_smd_device(dev);
 	struct qcom_smd_driver *qsdrv = to_smd_driver(dev);
 	struct qcom_smd_channel *channel = qsdev->channel;
-	struct qcom_smd_channel *tmp;
-	struct qcom_smd_channel *ch;
 
 	qcom_smd_channel_set_state(channel, SMD_CHANNEL_CLOSING);
 
@@ -911,15 +898,9 @@
 	if (qsdrv->remove)
 		qsdrv->remove(qsdev);
 
-	/*
-	 * The client is now gone, close and release all channels associated
-	 * with this sdev
-	 */
-	list_for_each_entry_safe(ch, tmp, &channel->dev_list, dev_list) {
-		qcom_smd_channel_close(ch);
-		list_del(&ch->dev_list);
-		ch->qsdev = NULL;
-	}
+	/* The client is now gone, close the primary channel */
+	qcom_smd_channel_close(channel);
+	channel->qsdev = NULL;
 
 	return 0;
 }
@@ -973,13 +954,12 @@
 	struct qcom_smd_device *qsdev;
 	struct qcom_smd_edge *edge = channel->edge;
 	struct device_node *node;
-	struct qcom_smd *smd = edge->smd;
 	int ret;
 
 	if (channel->qsdev)
 		return -EEXIST;
 
-	dev_dbg(smd->dev, "registering '%s'\n", channel->name);
+	dev_dbg(&edge->dev, "registering '%s'\n", channel->name);
 
 	qsdev = kzalloc(sizeof(*qsdev), GFP_KERNEL);
 	if (!qsdev)
@@ -990,7 +970,7 @@
 		     edge->of_node->name,
 		     node ? node->name : channel->name);
 
-	qsdev->dev.parent = smd->dev;
+	qsdev->dev.parent = &edge->dev;
 	qsdev->dev.bus = &qcom_smd_bus;
 	qsdev->dev.release = qcom_smd_release_device;
 	qsdev->dev.of_node = node;
@@ -1001,7 +981,7 @@
 
 	ret = device_register(&qsdev->dev);
 	if (ret) {
-		dev_err(smd->dev, "device_register failed: %d\n", ret);
+		dev_err(&edge->dev, "device_register failed: %d\n", ret);
 		put_device(&qsdev->dev);
 	}
 
@@ -1091,6 +1071,8 @@
  *
  * Returns a channel handle on success, or -EPROBE_DEFER if the channel isn't
  * ready.
+ *
+ * Any channels returned must be closed with a call to qcom_smd_close_channel()
  */
 struct qcom_smd_channel *qcom_smd_open_channel(struct qcom_smd_channel *parent,
 					       const char *name,
@@ -1120,15 +1102,21 @@
 		return ERR_PTR(ret);
 	}
 
-	/*
-	 * Append the list of channel to the channels associated with the sdev
-	 */
-	list_add_tail(&channel->dev_list, &sdev->channel->dev_list);
-
 	return channel;
 }
 EXPORT_SYMBOL(qcom_smd_open_channel);
 
+/**
+ * qcom_smd_close_channel() - close an additionally opened channel
+ * @channel:	channel handle, returned by qcom_smd_open_channel()
+ */
+void qcom_smd_close_channel(struct qcom_smd_channel *channel)
+{
+	qcom_smd_channel_close(channel);
+	channel->qsdev = NULL;
+}
+EXPORT_SYMBOL(qcom_smd_close_channel);
+
 /*
  * Allocate the qcom_smd_channel object for a newly found smd channel,
  * retrieving and validating the smem items involved.
@@ -1139,20 +1127,18 @@
 							char *name)
 {
 	struct qcom_smd_channel *channel;
-	struct qcom_smd *smd = edge->smd;
 	size_t fifo_size;
 	size_t info_size;
 	void *fifo_base;
 	void *info;
 	int ret;
 
-	channel = devm_kzalloc(smd->dev, sizeof(*channel), GFP_KERNEL);
+	channel = devm_kzalloc(&edge->dev, sizeof(*channel), GFP_KERNEL);
 	if (!channel)
 		return ERR_PTR(-ENOMEM);
 
-	INIT_LIST_HEAD(&channel->dev_list);
 	channel->edge = edge;
-	channel->name = devm_kstrdup(smd->dev, name, GFP_KERNEL);
+	channel->name = devm_kstrdup(&edge->dev, name, GFP_KERNEL);
 	if (!channel->name)
 		return ERR_PTR(-ENOMEM);
 
@@ -1175,7 +1161,7 @@
 	} else if (info_size == 2 * sizeof(struct smd_channel_info)) {
 		channel->info = info;
 	} else {
-		dev_err(smd->dev,
+		dev_err(&edge->dev,
 			"channel info of size %zu not supported\n", info_size);
 		ret = -EINVAL;
 		goto free_name_and_channel;
@@ -1190,7 +1176,7 @@
 	/* The channel consist of a rx and tx fifo of equal size */
 	fifo_size /= 2;
 
-	dev_dbg(smd->dev, "new channel '%s' info-size: %zu fifo-size: %zu\n",
+	dev_dbg(&edge->dev, "new channel '%s' info-size: %zu fifo-size: %zu\n",
 			  name, info_size, fifo_size);
 
 	channel->tx_fifo = fifo_base;
@@ -1202,8 +1188,8 @@
 	return channel;
 
 free_name_and_channel:
-	devm_kfree(smd->dev, channel->name);
-	devm_kfree(smd->dev, channel);
+	devm_kfree(&edge->dev, channel->name);
+	devm_kfree(&edge->dev, channel);
 
 	return ERR_PTR(ret);
 }
@@ -1219,7 +1205,6 @@
 	struct qcom_smd_alloc_entry *alloc_tbl;
 	struct qcom_smd_alloc_entry *entry;
 	struct qcom_smd_channel *channel;
-	struct qcom_smd *smd = edge->smd;
 	unsigned long flags;
 	unsigned fifo_id;
 	unsigned info_id;
@@ -1263,7 +1248,7 @@
 			list_add(&channel->list, &edge->channels);
 			spin_unlock_irqrestore(&edge->channels_lock, flags);
 
-			dev_dbg(smd->dev, "new channel found: '%s'\n", channel->name);
+			dev_dbg(&edge->dev, "new channel found: '%s'\n", channel->name);
 			set_bit(i, edge->allocated[tbl]);
 
 			wake_up_interruptible(&edge->new_channel_event);
@@ -1350,22 +1335,6 @@
 
 	edge->of_node = of_node_get(node);
 
-	irq = irq_of_parse_and_map(node, 0);
-	if (irq < 0) {
-		dev_err(dev, "required smd interrupt missing\n");
-		return -EINVAL;
-	}
-
-	ret = devm_request_irq(dev, irq,
-			       qcom_smd_edge_intr, IRQF_TRIGGER_RISING,
-			       node->name, edge);
-	if (ret) {
-		dev_err(dev, "failed to request smd irq\n");
-		return ret;
-	}
-
-	edge->irq = irq;
-
 	key = "qcom,smd-edge";
 	ret = of_property_read_u32(node, key, &edge->edge_id);
 	if (ret) {
@@ -1400,18 +1369,121 @@
 		return -EINVAL;
 	}
 
+	irq = irq_of_parse_and_map(node, 0);
+	if (irq < 0) {
+		dev_err(dev, "required smd interrupt missing\n");
+		return -EINVAL;
+	}
+
+	ret = devm_request_irq(dev, irq,
+			       qcom_smd_edge_intr, IRQF_TRIGGER_RISING,
+			       node->name, edge);
+	if (ret) {
+		dev_err(dev, "failed to request smd irq\n");
+		return ret;
+	}
+
+	edge->irq = irq;
+
 	return 0;
 }
 
-static int qcom_smd_probe(struct platform_device *pdev)
+/*
+ * Release function for an edge.
+ * Reset the state of each associated channel and free the edge context.
+ */
+static void qcom_smd_edge_release(struct device *dev)
+{
+	struct qcom_smd_channel *channel;
+	struct qcom_smd_edge *edge = to_smd_edge(dev);
+
+	list_for_each_entry(channel, &edge->channels, list) {
+		SET_RX_CHANNEL_INFO(channel, state, SMD_CHANNEL_CLOSED);
+		SET_RX_CHANNEL_INFO(channel, head, 0);
+		SET_RX_CHANNEL_INFO(channel, tail, 0);
+	}
+
+	kfree(edge);
+}
+
+/**
+ * qcom_smd_register_edge() - register an edge based on an device_node
+ * @parent:	parent device for the edge
+ * @node:	device_node describing the edge
+ *
+ * Returns an edge reference, or negative ERR_PTR() on failure.
+ */
+struct qcom_smd_edge *qcom_smd_register_edge(struct device *parent,
+					     struct device_node *node)
 {
 	struct qcom_smd_edge *edge;
-	struct device_node *node;
-	struct qcom_smd *smd;
-	size_t array_size;
-	int num_edges;
 	int ret;
-	int i = 0;
+
+	edge = kzalloc(sizeof(*edge), GFP_KERNEL);
+	if (!edge)
+		return ERR_PTR(-ENOMEM);
+
+	init_waitqueue_head(&edge->new_channel_event);
+
+	edge->dev.parent = parent;
+	edge->dev.release = qcom_smd_edge_release;
+	dev_set_name(&edge->dev, "%s:%s", dev_name(parent), node->name);
+	ret = device_register(&edge->dev);
+	if (ret) {
+		pr_err("failed to register smd edge\n");
+		return ERR_PTR(ret);
+	}
+
+	ret = qcom_smd_parse_edge(&edge->dev, node, edge);
+	if (ret) {
+		dev_err(&edge->dev, "failed to parse smd edge\n");
+		goto unregister_dev;
+	}
+
+	schedule_work(&edge->scan_work);
+
+	return edge;
+
+unregister_dev:
+	put_device(&edge->dev);
+	return ERR_PTR(ret);
+}
+EXPORT_SYMBOL(qcom_smd_register_edge);
+
+static int qcom_smd_remove_device(struct device *dev, void *data)
+{
+	device_unregister(dev);
+	of_node_put(dev->of_node);
+	put_device(dev);
+
+	return 0;
+}
+
+/**
+ * qcom_smd_unregister_edge() - release an edge and its children
+ * @edge:	edge reference acquired from qcom_smd_register_edge
+ */
+int qcom_smd_unregister_edge(struct qcom_smd_edge *edge)
+{
+	int ret;
+
+	disable_irq(edge->irq);
+	cancel_work_sync(&edge->scan_work);
+	cancel_work_sync(&edge->state_work);
+
+	ret = device_for_each_child(&edge->dev, NULL, qcom_smd_remove_device);
+	if (ret)
+		dev_warn(&edge->dev, "can't remove smd device: %d\n", ret);
+
+	device_unregister(&edge->dev);
+
+	return 0;
+}
+EXPORT_SYMBOL(qcom_smd_unregister_edge);
+
+static int qcom_smd_probe(struct platform_device *pdev)
+{
+	struct device_node *node;
 	void *p;
 
 	/* Wait for smem */
@@ -1419,59 +1491,32 @@
 	if (PTR_ERR(p) == -EPROBE_DEFER)
 		return PTR_ERR(p);
 
-	num_edges = of_get_available_child_count(pdev->dev.of_node);
-	array_size = sizeof(*smd) + num_edges * sizeof(struct qcom_smd_edge);
-	smd = devm_kzalloc(&pdev->dev, array_size, GFP_KERNEL);
-	if (!smd)
-		return -ENOMEM;
-	smd->dev = &pdev->dev;
-
-	smd->num_edges = num_edges;
-	for_each_available_child_of_node(pdev->dev.of_node, node) {
-		edge = &smd->edges[i++];
-		edge->smd = smd;
-		init_waitqueue_head(&edge->new_channel_event);
-
-		ret = qcom_smd_parse_edge(&pdev->dev, node, edge);
-		if (ret)
-			continue;
-
-		schedule_work(&edge->scan_work);
-	}
-
-	platform_set_drvdata(pdev, smd);
+	for_each_available_child_of_node(pdev->dev.of_node, node)
+		qcom_smd_register_edge(&pdev->dev, node);
 
 	return 0;
 }
 
+static int qcom_smd_remove_edge(struct device *dev, void *data)
+{
+	struct qcom_smd_edge *edge = to_smd_edge(dev);
+
+	return qcom_smd_unregister_edge(edge);
+}
+
 /*
  * Shut down all smd clients by making sure that each edge stops processing
  * events and scanning for new channels, then call destroy on the devices.
  */
 static int qcom_smd_remove(struct platform_device *pdev)
 {
-	struct qcom_smd_channel *channel;
-	struct qcom_smd_edge *edge;
-	struct qcom_smd *smd = platform_get_drvdata(pdev);
-	int i;
+	int ret;
 
-	for (i = 0; i < smd->num_edges; i++) {
-		edge = &smd->edges[i];
+	ret = device_for_each_child(&pdev->dev, NULL, qcom_smd_remove_edge);
+	if (ret)
+		dev_warn(&pdev->dev, "can't remove smd device: %d\n", ret);
 
-		disable_irq(edge->irq);
-		cancel_work_sync(&edge->scan_work);
-		cancel_work_sync(&edge->state_work);
-
-		/* No need to lock here, because the writer is gone */
-		list_for_each_entry(channel, &edge->channels, list) {
-			if (!channel->qsdev)
-				continue;
-
-			qcom_smd_destroy_device(channel);
-		}
-	}
-
-	return 0;
+	return ret;
 }
 
 static const struct of_device_id qcom_smd_of_match[] = {
diff --git a/drivers/soc/qcom/smem.c b/drivers/soc/qcom/smem.c
index 2e1aa9f..18ec52f 100644
--- a/drivers/soc/qcom/smem.c
+++ b/drivers/soc/qcom/smem.c
@@ -740,7 +740,8 @@
 
 	hwlock_id = of_hwspin_lock_get_id(pdev->dev.of_node, 0);
 	if (hwlock_id < 0) {
-		dev_err(&pdev->dev, "failed to retrieve hwlock\n");
+		if (hwlock_id != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "failed to retrieve hwlock\n");
 		return hwlock_id;
 	}
 
diff --git a/drivers/soc/rockchip/pm_domains.c b/drivers/soc/rockchip/pm_domains.c
index 44842a2..7acd151 100644
--- a/drivers/soc/rockchip/pm_domains.c
+++ b/drivers/soc/rockchip/pm_domains.c
@@ -27,6 +27,7 @@
 	int req_mask;
 	int idle_mask;
 	int ack_mask;
+	bool active_wakeup;
 };
 
 struct rockchip_pmu_info {
@@ -75,23 +76,24 @@
 
 #define to_rockchip_pd(gpd) container_of(gpd, struct rockchip_pm_domain, genpd)
 
-#define DOMAIN(pwr, status, req, idle, ack)	\
+#define DOMAIN(pwr, status, req, idle, ack, wakeup)	\
 {						\
 	.pwr_mask = (pwr >= 0) ? BIT(pwr) : 0,		\
 	.status_mask = (status >= 0) ? BIT(status) : 0,	\
 	.req_mask = (req >= 0) ? BIT(req) : 0,		\
 	.idle_mask = (idle >= 0) ? BIT(idle) : 0,	\
 	.ack_mask = (ack >= 0) ? BIT(ack) : 0,		\
+	.active_wakeup = wakeup,			\
 }
 
-#define DOMAIN_RK3288(pwr, status, req)		\
-	DOMAIN(pwr, status, req, req, (req) + 16)
+#define DOMAIN_RK3288(pwr, status, req, wakeup)		\
+	DOMAIN(pwr, status, req, req, (req) + 16, wakeup)
 
-#define DOMAIN_RK3368(pwr, status, req)		\
-	DOMAIN(pwr, status, req, (req) + 16, req)
+#define DOMAIN_RK3368(pwr, status, req, wakeup)		\
+	DOMAIN(pwr, status, req, (req) + 16, req, wakeup)
 
-#define DOMAIN_RK3399(pwr, status, req)                \
-	DOMAIN(pwr, status, req, req, req)
+#define DOMAIN_RK3399(pwr, status, req, wakeup)		\
+	DOMAIN(pwr, status, req, req, req, wakeup)
 
 static bool rockchip_pmu_domain_is_idle(struct rockchip_pm_domain *pd)
 {
@@ -295,6 +297,17 @@
 	pm_clk_destroy(dev);
 }
 
+static bool rockchip_active_wakeup(struct device *dev)
+{
+	struct generic_pm_domain *genpd;
+	struct rockchip_pm_domain *pd;
+
+	genpd = pd_to_genpd(dev->pm_domain);
+	pd = container_of(genpd, struct rockchip_pm_domain, genpd);
+
+	return pd->info->active_wakeup;
+}
+
 static int rockchip_pm_add_one_domain(struct rockchip_pmu *pmu,
 				      struct device_node *node)
 {
@@ -415,6 +428,7 @@
 	pd->genpd.power_on = rockchip_pd_power_on;
 	pd->genpd.attach_dev = rockchip_pd_attach_dev;
 	pd->genpd.detach_dev = rockchip_pd_detach_dev;
+	pd->genpd.dev_ops.active_wakeup = rockchip_active_wakeup;
 	pd->genpd.flags = GENPD_FLAG_PM_CLK;
 	pm_genpd_init(&pd->genpd, NULL, false);
 
@@ -623,48 +637,48 @@
 }
 
 static const struct rockchip_domain_info rk3288_pm_domains[] = {
-	[RK3288_PD_VIO]		= DOMAIN_RK3288(7, 7, 4),
-	[RK3288_PD_HEVC]	= DOMAIN_RK3288(14, 10, 9),
-	[RK3288_PD_VIDEO]	= DOMAIN_RK3288(8, 8, 3),
-	[RK3288_PD_GPU]		= DOMAIN_RK3288(9, 9, 2),
+	[RK3288_PD_VIO]		= DOMAIN_RK3288(7, 7, 4, false),
+	[RK3288_PD_HEVC]	= DOMAIN_RK3288(14, 10, 9, false),
+	[RK3288_PD_VIDEO]	= DOMAIN_RK3288(8, 8, 3, false),
+	[RK3288_PD_GPU]		= DOMAIN_RK3288(9, 9, 2, false),
 };
 
 static const struct rockchip_domain_info rk3368_pm_domains[] = {
-	[RK3368_PD_PERI]	= DOMAIN_RK3368(13, 12, 6),
-	[RK3368_PD_VIO]		= DOMAIN_RK3368(15, 14, 8),
-	[RK3368_PD_VIDEO]	= DOMAIN_RK3368(14, 13, 7),
-	[RK3368_PD_GPU_0]	= DOMAIN_RK3368(16, 15, 2),
-	[RK3368_PD_GPU_1]	= DOMAIN_RK3368(17, 16, 2),
+	[RK3368_PD_PERI]	= DOMAIN_RK3368(13, 12, 6, true),
+	[RK3368_PD_VIO]		= DOMAIN_RK3368(15, 14, 8, false),
+	[RK3368_PD_VIDEO]	= DOMAIN_RK3368(14, 13, 7, false),
+	[RK3368_PD_GPU_0]	= DOMAIN_RK3368(16, 15, 2, false),
+	[RK3368_PD_GPU_1]	= DOMAIN_RK3368(17, 16, 2, false),
 };
 
 static const struct rockchip_domain_info rk3399_pm_domains[] = {
-	[RK3399_PD_TCPD0]	= DOMAIN_RK3399(8, 8, -1),
-	[RK3399_PD_TCPD1]	= DOMAIN_RK3399(9, 9, -1),
-	[RK3399_PD_CCI]		= DOMAIN_RK3399(10, 10, -1),
-	[RK3399_PD_CCI0]	= DOMAIN_RK3399(-1, -1, 15),
-	[RK3399_PD_CCI1]	= DOMAIN_RK3399(-1, -1, 16),
-	[RK3399_PD_PERILP]	= DOMAIN_RK3399(11, 11, 1),
-	[RK3399_PD_PERIHP]	= DOMAIN_RK3399(12, 12, 2),
-	[RK3399_PD_CENTER]	= DOMAIN_RK3399(13, 13, 14),
-	[RK3399_PD_VIO]		= DOMAIN_RK3399(14, 14, 17),
-	[RK3399_PD_GPU]		= DOMAIN_RK3399(15, 15, 0),
-	[RK3399_PD_VCODEC]	= DOMAIN_RK3399(16, 16, 3),
-	[RK3399_PD_VDU]		= DOMAIN_RK3399(17, 17, 4),
-	[RK3399_PD_RGA]		= DOMAIN_RK3399(18, 18, 5),
-	[RK3399_PD_IEP]		= DOMAIN_RK3399(19, 19, 6),
-	[RK3399_PD_VO]		= DOMAIN_RK3399(20, 20, -1),
-	[RK3399_PD_VOPB]	= DOMAIN_RK3399(-1, -1, 7),
-	[RK3399_PD_VOPL]	= DOMAIN_RK3399(-1, -1, 8),
-	[RK3399_PD_ISP0]	= DOMAIN_RK3399(22, 22, 9),
-	[RK3399_PD_ISP1]	= DOMAIN_RK3399(23, 23, 10),
-	[RK3399_PD_HDCP]	= DOMAIN_RK3399(24, 24, 11),
-	[RK3399_PD_GMAC]	= DOMAIN_RK3399(25, 25, 23),
-	[RK3399_PD_EMMC]	= DOMAIN_RK3399(26, 26, 24),
-	[RK3399_PD_USB3]	= DOMAIN_RK3399(27, 27, 12),
-	[RK3399_PD_EDP]		= DOMAIN_RK3399(28, 28, 22),
-	[RK3399_PD_GIC]		= DOMAIN_RK3399(29, 29, 27),
-	[RK3399_PD_SD]		= DOMAIN_RK3399(30, 30, 28),
-	[RK3399_PD_SDIOAUDIO]	= DOMAIN_RK3399(31, 31, 29),
+	[RK3399_PD_TCPD0]	= DOMAIN_RK3399(8, 8, -1, false),
+	[RK3399_PD_TCPD1]	= DOMAIN_RK3399(9, 9, -1, false),
+	[RK3399_PD_CCI]		= DOMAIN_RK3399(10, 10, -1, true),
+	[RK3399_PD_CCI0]	= DOMAIN_RK3399(-1, -1, 15, true),
+	[RK3399_PD_CCI1]	= DOMAIN_RK3399(-1, -1, 16, true),
+	[RK3399_PD_PERILP]	= DOMAIN_RK3399(11, 11, 1, true),
+	[RK3399_PD_PERIHP]	= DOMAIN_RK3399(12, 12, 2, true),
+	[RK3399_PD_CENTER]	= DOMAIN_RK3399(13, 13, 14, true),
+	[RK3399_PD_VIO]		= DOMAIN_RK3399(14, 14, 17, false),
+	[RK3399_PD_GPU]		= DOMAIN_RK3399(15, 15, 0, false),
+	[RK3399_PD_VCODEC]	= DOMAIN_RK3399(16, 16, 3, false),
+	[RK3399_PD_VDU]		= DOMAIN_RK3399(17, 17, 4, false),
+	[RK3399_PD_RGA]		= DOMAIN_RK3399(18, 18, 5, false),
+	[RK3399_PD_IEP]		= DOMAIN_RK3399(19, 19, 6, false),
+	[RK3399_PD_VO]		= DOMAIN_RK3399(20, 20, -1, false),
+	[RK3399_PD_VOPB]	= DOMAIN_RK3399(-1, -1, 7, false),
+	[RK3399_PD_VOPL]	= DOMAIN_RK3399(-1, -1, 8, false),
+	[RK3399_PD_ISP0]	= DOMAIN_RK3399(22, 22, 9, false),
+	[RK3399_PD_ISP1]	= DOMAIN_RK3399(23, 23, 10, false),
+	[RK3399_PD_HDCP]	= DOMAIN_RK3399(24, 24, 11, false),
+	[RK3399_PD_GMAC]	= DOMAIN_RK3399(25, 25, 23, true),
+	[RK3399_PD_EMMC]	= DOMAIN_RK3399(26, 26, 24, true),
+	[RK3399_PD_USB3]	= DOMAIN_RK3399(27, 27, 12, true),
+	[RK3399_PD_EDP]		= DOMAIN_RK3399(28, 28, 22, false),
+	[RK3399_PD_GIC]		= DOMAIN_RK3399(29, 29, 27, true),
+	[RK3399_PD_SD]		= DOMAIN_RK3399(30, 30, 28, true),
+	[RK3399_PD_SDIOAUDIO]	= DOMAIN_RK3399(31, 31, 29, true),
 };
 
 static const struct rockchip_pmu_info rk3288_pmu = {
diff --git a/drivers/soc/tegra/pmc.c b/drivers/soc/tegra/pmc.c
index 71c834f..7792ed8 100644
--- a/drivers/soc/tegra/pmc.c
+++ b/drivers/soc/tegra/pmc.c
@@ -967,8 +967,8 @@
 
 int tegra_io_rail_power_on(unsigned int id)
 {
-	unsigned long request, status, value;
-	unsigned int bit, mask;
+	unsigned long request, status;
+	unsigned int bit;
 	int err;
 
 	mutex_lock(&pmc->powergates_lock);
@@ -977,15 +977,9 @@
 	if (err)
 		goto error;
 
-	mask = 1 << bit;
+	tegra_pmc_writel(IO_DPD_REQ_CODE_OFF | BIT(bit), request);
 
-	value = tegra_pmc_readl(request);
-	value |= mask;
-	value &= ~IO_DPD_REQ_CODE_MASK;
-	value |= IO_DPD_REQ_CODE_OFF;
-	tegra_pmc_writel(value, request);
-
-	err = tegra_io_rail_poll(status, mask, 0, 250);
+	err = tegra_io_rail_poll(status, BIT(bit), 0, 250);
 	if (err) {
 		pr_info("tegra_io_rail_poll() failed: %d\n", err);
 		goto error;
@@ -1002,8 +996,8 @@
 
 int tegra_io_rail_power_off(unsigned int id)
 {
-	unsigned long request, status, value;
-	unsigned int bit, mask;
+	unsigned long request, status;
+	unsigned int bit;
 	int err;
 
 	mutex_lock(&pmc->powergates_lock);
@@ -1014,15 +1008,9 @@
 		goto error;
 	}
 
-	mask = 1 << bit;
+	tegra_pmc_writel(IO_DPD_REQ_CODE_ON | BIT(bit), request);
 
-	value = tegra_pmc_readl(request);
-	value |= mask;
-	value &= ~IO_DPD_REQ_CODE_MASK;
-	value |= IO_DPD_REQ_CODE_ON;
-	tegra_pmc_writel(value, request);
-
-	err = tegra_io_rail_poll(status, mask, mask, 250);
+	err = tegra_io_rail_poll(status, BIT(bit), BIT(bit), 250);
 	if (err)
 		goto error;
 
diff --git a/drivers/staging/lustre/lustre/llite/file.c b/drivers/staging/lustre/lustre/llite/file.c
index 6e3a188..d56863f 100644
--- a/drivers/staging/lustre/lustre/llite/file.c
+++ b/drivers/staging/lustre/lustre/llite/file.c
@@ -1138,45 +1138,31 @@
 			range_lock_init(&range, *ppos, *ppos + count - 1);
 
 		vio->vui_fd  = LUSTRE_FPRIVATE(file);
-		vio->vui_io_subtype = args->via_io_subtype;
+		vio->vui_iter = args->u.normal.via_iter;
+		vio->vui_iocb = args->u.normal.via_iocb;
+		/*
+		 * Direct IO reads must also take range lock,
+		 * or multiple reads will try to work on the same pages
+		 * See LU-6227 for details.
+		 */
+		if (((iot == CIT_WRITE) ||
+		     (iot == CIT_READ && (file->f_flags & O_DIRECT))) &&
+		    !(vio->vui_fd->fd_flags & LL_FILE_GROUP_LOCKED)) {
+			CDEBUG(D_VFSTRACE, "Range lock [%llu, %llu]\n",
+			       range.rl_node.in_extent.start,
+			       range.rl_node.in_extent.end);
+			result = range_lock(&lli->lli_write_tree,
+					    &range);
+			if (result < 0)
+				goto out;
 
-		switch (vio->vui_io_subtype) {
-		case IO_NORMAL:
-			vio->vui_iter = args->u.normal.via_iter;
-			vio->vui_iocb = args->u.normal.via_iocb;
-			/*
-			 * Direct IO reads must also take range lock,
-			 * or multiple reads will try to work on the same pages
-			 * See LU-6227 for details.
-			 */
-			if (((iot == CIT_WRITE) ||
-			     (iot == CIT_READ && (file->f_flags & O_DIRECT))) &&
-			    !(vio->vui_fd->fd_flags & LL_FILE_GROUP_LOCKED)) {
-				CDEBUG(D_VFSTRACE, "Range lock [%llu, %llu]\n",
-				       range.rl_node.in_extent.start,
-				       range.rl_node.in_extent.end);
-				result = range_lock(&lli->lli_write_tree,
-						    &range);
-				if (result < 0)
-					goto out;
-
-				range_locked = true;
-			}
-			down_read(&lli->lli_trunc_sem);
-			break;
-		case IO_SPLICE:
-			vio->u.splice.vui_pipe = args->u.splice.via_pipe;
-			vio->u.splice.vui_flags = args->u.splice.via_flags;
-			break;
-		default:
-			CERROR("Unknown IO type - %u\n", vio->vui_io_subtype);
-			LBUG();
+			range_locked = true;
 		}
+		down_read(&lli->lli_trunc_sem);
 		ll_cl_add(file, env, io);
 		result = cl_io_loop(env, io);
 		ll_cl_remove(file, env);
-		if (args->via_io_subtype == IO_NORMAL)
-			up_read(&lli->lli_trunc_sem);
+		up_read(&lli->lli_trunc_sem);
 		if (range_locked) {
 			CDEBUG(D_VFSTRACE, "Range unlock [%llu, %llu]\n",
 			       range.rl_node.in_extent.start,
@@ -1235,7 +1221,7 @@
 	if (IS_ERR(env))
 		return PTR_ERR(env);
 
-	args = ll_env_args(env, IO_NORMAL);
+	args = ll_env_args(env);
 	args->u.normal.via_iter = to;
 	args->u.normal.via_iocb = iocb;
 
@@ -1259,7 +1245,7 @@
 	if (IS_ERR(env))
 		return PTR_ERR(env);
 
-	args = ll_env_args(env, IO_NORMAL);
+	args = ll_env_args(env);
 	args->u.normal.via_iter = from;
 	args->u.normal.via_iocb = iocb;
 
@@ -1269,31 +1255,6 @@
 	return result;
 }
 
-/*
- * Send file content (through pagecache) somewhere with helper
- */
-static ssize_t ll_file_splice_read(struct file *in_file, loff_t *ppos,
-				   struct pipe_inode_info *pipe, size_t count,
-				   unsigned int flags)
-{
-	struct lu_env      *env;
-	struct vvp_io_args *args;
-	ssize_t	     result;
-	int		 refcheck;
-
-	env = cl_env_get(&refcheck);
-	if (IS_ERR(env))
-		return PTR_ERR(env);
-
-	args = ll_env_args(env, IO_SPLICE);
-	args->u.splice.via_pipe = pipe;
-	args->u.splice.via_flags = flags;
-
-	result = ll_file_io_generic(env, args, in_file, CIT_READ, ppos, count);
-	cl_env_put(env, &refcheck);
-	return result;
-}
-
 int ll_lov_setstripe_ea_info(struct inode *inode, struct dentry *dentry,
 			     __u64 flags, struct lov_user_md *lum,
 			     int lum_size)
@@ -3267,7 +3228,7 @@
 	.release	= ll_file_release,
 	.mmap	   = ll_file_mmap,
 	.llseek	 = ll_file_seek,
-	.splice_read    = ll_file_splice_read,
+	.splice_read    = generic_file_splice_read,
 	.fsync	  = ll_fsync,
 	.flush	  = ll_flush
 };
@@ -3280,7 +3241,7 @@
 	.release	= ll_file_release,
 	.mmap	   = ll_file_mmap,
 	.llseek	 = ll_file_seek,
-	.splice_read    = ll_file_splice_read,
+	.splice_read    = generic_file_splice_read,
 	.fsync	  = ll_fsync,
 	.flush	  = ll_flush,
 	.flock	  = ll_file_flock,
@@ -3296,7 +3257,7 @@
 	.release	= ll_file_release,
 	.mmap	   = ll_file_mmap,
 	.llseek	 = ll_file_seek,
-	.splice_read    = ll_file_splice_read,
+	.splice_read    = generic_file_splice_read,
 	.fsync	  = ll_fsync,
 	.flush	  = ll_flush,
 	.flock	  = ll_file_noflock,
diff --git a/drivers/staging/lustre/lustre/llite/llite_internal.h b/drivers/staging/lustre/lustre/llite/llite_internal.h
index 3e98bd6..4bc5512 100644
--- a/drivers/staging/lustre/lustre/llite/llite_internal.h
+++ b/drivers/staging/lustre/lustre/llite/llite_internal.h
@@ -908,17 +908,11 @@
  */
 struct vvp_io_args {
 	/** normal/splice */
-	enum vvp_io_subtype via_io_subtype;
-
 	union {
 		struct {
 			struct kiocb      *via_iocb;
 			struct iov_iter   *via_iter;
 		} normal;
-		struct {
-			struct pipe_inode_info  *via_pipe;
-			unsigned int       via_flags;
-		} splice;
 	} u;
 };
 
@@ -946,14 +940,9 @@
 	return lti;
 }
 
-static inline struct vvp_io_args *ll_env_args(const struct lu_env *env,
-					      enum vvp_io_subtype type)
+static inline struct vvp_io_args *ll_env_args(const struct lu_env *env)
 {
-	struct vvp_io_args *via = &ll_env_info(env)->lti_args;
-
-	via->via_io_subtype = type;
-
-	return via;
+	return &ll_env_info(env)->lti_args;
 }
 
 void ll_queue_done_writing(struct inode *inode, unsigned long flags);
diff --git a/drivers/staging/lustre/lustre/llite/vvp_internal.h b/drivers/staging/lustre/lustre/llite/vvp_internal.h
index 5802da8..4464ad2 100644
--- a/drivers/staging/lustre/lustre/llite/vvp_internal.h
+++ b/drivers/staging/lustre/lustre/llite/vvp_internal.h
@@ -49,14 +49,6 @@
 struct obd_export;
 struct page;
 
-/* specific architecture can implement only part of this list */
-enum vvp_io_subtype {
-	/** normal IO */
-	IO_NORMAL,
-	/** io started from splice_{read|write} */
-	IO_SPLICE
-};
-
 /**
  * IO state private to IO state private to VVP layer.
  */
@@ -99,10 +91,6 @@
 			bool		ft_flags_valid;
 		} fault;
 		struct {
-			struct pipe_inode_info	*vui_pipe;
-			unsigned int		 vui_flags;
-		} splice;
-		struct {
 			struct cl_page_list vui_queue;
 			unsigned long vui_written;
 			int vui_from;
@@ -110,8 +98,6 @@
 		} write;
 	} u;
 
-	enum vvp_io_subtype	vui_io_subtype;
-
 	/**
 	 * Layout version when this IO is initialized
 	 */
diff --git a/drivers/staging/lustre/lustre/llite/vvp_io.c b/drivers/staging/lustre/lustre/llite/vvp_io.c
index 2ab4503..2b7f182 100644
--- a/drivers/staging/lustre/lustre/llite/vvp_io.c
+++ b/drivers/staging/lustre/lustre/llite/vvp_io.c
@@ -54,18 +54,6 @@
 }
 
 /**
- * True, if \a io is a normal io, False for splice_{read,write}
- */
-static int cl_is_normalio(const struct lu_env *env, const struct cl_io *io)
-{
-	struct vvp_io *vio = vvp_env_io(env);
-
-	LASSERT(io->ci_type == CIT_READ || io->ci_type == CIT_WRITE);
-
-	return vio->vui_io_subtype == IO_NORMAL;
-}
-
-/**
  * For swapping layout. The file's layout may have changed.
  * To avoid populating pages to a wrong stripe, we have to verify the
  * correctness of layout. It works because swapping layout processes
@@ -390,9 +378,6 @@
 
 	LASSERT(io->ci_type == CIT_READ || io->ci_type == CIT_WRITE);
 
-	if (!cl_is_normalio(env, io))
-		return 0;
-
 	if (!vio->vui_iter) /* nfs or loop back device write */
 		return 0;
 
@@ -461,15 +446,10 @@
 			   const struct cl_io_slice *ios,
 			   size_t nob)
 {
-	struct vvp_io    *vio = cl2vvp_io(env, ios);
-	struct cl_io     *io  = ios->cis_io;
 	struct cl_object *obj = ios->cis_io->ci_obj;
-
+	struct vvp_io	 *vio = cl2vvp_io(env, ios);
 	CLOBINVRNT(env, obj, vvp_object_invariant(obj));
 
-	if (!cl_is_normalio(env, io))
-		return;
-
 	iov_iter_reexpand(vio->vui_iter, vio->vui_tot_count  -= nob);
 }
 
@@ -478,7 +458,7 @@
 {
 	size_t size = io->u.ci_rw.crw_count;
 
-	if (!cl_is_normalio(env, io) || !vio->vui_iter)
+	if (!vio->vui_iter)
 		return;
 
 	iov_iter_truncate(vio->vui_iter, size);
@@ -715,25 +695,8 @@
 
 	/* BUG: 5972 */
 	file_accessed(file);
-	switch (vio->vui_io_subtype) {
-	case IO_NORMAL:
-		LASSERT(vio->vui_iocb->ki_pos == pos);
-		result = generic_file_read_iter(vio->vui_iocb, vio->vui_iter);
-		break;
-	case IO_SPLICE:
-		result = generic_file_splice_read(file, &pos,
-						  vio->u.splice.vui_pipe, cnt,
-						  vio->u.splice.vui_flags);
-		/* LU-1109: do splice read stripe by stripe otherwise if it
-		 * may make nfsd stuck if this read occupied all internal pipe
-		 * buffers.
-		 */
-		io->ci_continue = 0;
-		break;
-	default:
-		CERROR("Wrong IO type %u\n", vio->vui_io_subtype);
-		LBUG();
-	}
+	LASSERT(vio->vui_iocb->ki_pos == pos);
+	result = generic_file_read_iter(vio->vui_iocb, vio->vui_iter);
 
 out:
 	if (result >= 0) {
diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c
index 530959a..8e1728b 100644
--- a/drivers/usb/dwc2/platform.c
+++ b/drivers/usb/dwc2/platform.c
@@ -182,6 +182,38 @@
 	.hibernation			= -1,
 };
 
+static const struct dwc2_core_params params_amlogic = {
+	.otg_cap			= DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE,
+	.otg_ver			= -1,
+	.dma_enable			= 1,
+	.dma_desc_enable		= 0,
+	.dma_desc_fs_enable		= 0,
+	.speed				= DWC2_SPEED_PARAM_HIGH,
+	.enable_dynamic_fifo		= 1,
+	.en_multiple_tx_fifo		= -1,
+	.host_rx_fifo_size		= 512,
+	.host_nperio_tx_fifo_size	= 500,
+	.host_perio_tx_fifo_size	= 500,
+	.max_transfer_size		= -1,
+	.max_packet_count		= -1,
+	.host_channels			= 16,
+	.phy_type			= DWC2_PHY_TYPE_PARAM_UTMI,
+	.phy_utmi_width			= -1,
+	.phy_ulpi_ddr			= -1,
+	.phy_ulpi_ext_vbus		= -1,
+	.i2c_enable			= -1,
+	.ulpi_fs_ls			= -1,
+	.host_support_fs_ls_low_power	= -1,
+	.host_ls_low_power_phy_clk	= -1,
+	.ts_dline			= -1,
+	.reload_ctl			= 1,
+	.ahbcfg				= GAHBCFG_HBSTLEN_INCR8 <<
+					  GAHBCFG_HBSTLEN_SHIFT,
+	.uframe_sched			= 0,
+	.external_id_pin_ctl		= -1,
+	.hibernation			= -1,
+};
+
 /*
  * Check the dr_mode against the module configuration and hardware
  * capabilities.
@@ -486,6 +518,8 @@
 	{ .compatible = "lantiq,xrx200-usb", .data = &params_ltq },
 	{ .compatible = "snps,dwc2", .data = NULL },
 	{ .compatible = "samsung,s3c6400-hsotg", .data = NULL},
+	{ .compatible = "amlogic,meson8b-usb", .data = &params_amlogic },
+	{ .compatible = "amlogic,meson-gxbb-usb", .data = &params_amlogic },
 	{},
 };
 MODULE_DEVICE_TABLE(of, dwc2_of_match_table);
diff --git a/fs/befs/linuxvfs.c b/fs/befs/linuxvfs.c
index 7da05b1..bfe9f99 100644
--- a/fs/befs/linuxvfs.c
+++ b/fs/befs/linuxvfs.c
@@ -789,7 +789,7 @@
 	 * Will be set to real fs blocksize later.
 	 *
 	 * Linux 2.4.10 and later refuse to read blocks smaller than
-	 * the hardsect size for the device. But we also need to read at 
+	 * the logical block size for the device. But we also need to read at
 	 * least 1k to get the second 512 bytes of the volume.
 	 * -WD 10-26-01
 	 */ 
diff --git a/fs/block_dev.c b/fs/block_dev.c
index 08ae993..376e4e4 100644
--- a/fs/block_dev.c
+++ b/fs/block_dev.c
@@ -180,9 +180,6 @@
 	struct file *file = iocb->ki_filp;
 	struct inode *inode = bdev_file_inode(file);
 
-	if (IS_DAX(inode))
-		return dax_do_io(iocb, inode, iter, blkdev_get_block,
-				NULL, DIO_SKIP_DIO_COUNT);
 	return __blockdev_direct_IO(iocb, inode, I_BDEV(inode), iter,
 				    blkdev_get_block, NULL, NULL,
 				    DIO_SKIP_DIO_COUNT);
@@ -302,14 +299,11 @@
 		error = sb->s_op->thaw_super(sb);
 	else
 		error = thaw_super(sb);
-	if (error) {
+	if (error)
 		bdev->bd_fsfreeze_count++;
-		mutex_unlock(&bdev->bd_fsfreeze_mutex);
-		return error;
-	}
 out:
 	mutex_unlock(&bdev->bd_fsfreeze_mutex);
-	return 0;
+	return error;
 }
 EXPORT_SYMBOL(thaw_bdev);
 
@@ -1275,7 +1269,6 @@
 		bdev->bd_disk = disk;
 		bdev->bd_queue = disk->queue;
 		bdev->bd_contains = bdev;
-		bdev->bd_inode->i_flags = 0;
 
 		if (!partno) {
 			ret = -ENXIO;
@@ -1303,11 +1296,8 @@
 				}
 			}
 
-			if (!ret) {
+			if (!ret)
 				bd_set_size(bdev,(loff_t)get_capacity(disk)<<9);
-				if (!bdev_dax_capable(bdev))
-					bdev->bd_inode->i_flags &= ~S_DAX;
-			}
 
 			/*
 			 * If the device is invalidated, rescan partition
@@ -1342,8 +1332,6 @@
 				goto out_clear;
 			}
 			bd_set_size(bdev, (loff_t)bdev->bd_part->nr_sects << 9);
-			if (!bdev_dax_capable(bdev))
-				bdev->bd_inode->i_flags &= ~S_DAX;
 		}
 	} else {
 		if (bdev->bd_contains == bdev) {
diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index e6811c42..ca01106 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -8412,7 +8412,7 @@
 	if (!bio)
 		return -ENOMEM;
 
-	bio_set_op_attrs(bio, bio_op(orig_bio), orig_bio->bi_opf);
+	bio_set_op_attrs(bio, bio_op(orig_bio), bio_flags(orig_bio));
 	bio->bi_private = dip;
 	bio->bi_end_io = btrfs_end_dio_bio;
 	btrfs_io_bio(bio)->logical = file_offset;
@@ -8450,7 +8450,8 @@
 						  start_sector, GFP_NOFS);
 			if (!bio)
 				goto out_err;
-			bio_set_op_attrs(bio, bio_op(orig_bio), orig_bio->bi_opf);
+			bio_set_op_attrs(bio, bio_op(orig_bio),
+					 bio_flags(orig_bio));
 			bio->bi_private = dip;
 			bio->bi_end_io = btrfs_end_dio_bio;
 			btrfs_io_bio(bio)->logical = file_offset;
diff --git a/fs/coda/file.c b/fs/coda/file.c
index f47c748..8415d4f 100644
--- a/fs/coda/file.c
+++ b/fs/coda/file.c
@@ -38,27 +38,6 @@
 }
 
 static ssize_t
-coda_file_splice_read(struct file *coda_file, loff_t *ppos,
-		      struct pipe_inode_info *pipe, size_t count,
-		      unsigned int flags)
-{
-	ssize_t (*splice_read)(struct file *, loff_t *,
-			       struct pipe_inode_info *, size_t, unsigned int);
-	struct coda_file_info *cfi;
-	struct file *host_file;
-
-	cfi = CODA_FTOC(coda_file);
-	BUG_ON(!cfi || cfi->cfi_magic != CODA_MAGIC);
-	host_file = cfi->cfi_container;
-
-	splice_read = host_file->f_op->splice_read;
-	if (!splice_read)
-		splice_read = default_file_splice_read;
-
-	return splice_read(host_file, ppos, pipe, count, flags);
-}
-
-static ssize_t
 coda_file_write_iter(struct kiocb *iocb, struct iov_iter *to)
 {
 	struct file *coda_file = iocb->ki_filp;
@@ -225,6 +204,6 @@
 	.open		= coda_open,
 	.release	= coda_release,
 	.fsync		= coda_fsync,
-	.splice_read	= coda_file_splice_read,
+	.splice_read	= generic_file_splice_read,
 };
 
diff --git a/fs/crypto/crypto.c b/fs/crypto/crypto.c
index c502c11..61057b7d 100644
--- a/fs/crypto/crypto.c
+++ b/fs/crypto/crypto.c
@@ -28,7 +28,6 @@
 #include <linux/dcache.h>
 #include <linux/namei.h>
 #include <linux/fscrypto.h>
-#include <linux/ecryptfs.h>
 
 static unsigned int num_prealloc_crypto_pages = 32;
 static unsigned int num_prealloc_crypto_ctxs = 128;
@@ -128,11 +127,11 @@
 EXPORT_SYMBOL(fscrypt_get_ctx);
 
 /**
- * fscrypt_complete() - The completion callback for page encryption
- * @req: The asynchronous encryption request context
- * @res: The result of the encryption operation
+ * page_crypt_complete() - completion callback for page crypto
+ * @req: The asynchronous cipher request context
+ * @res: The result of the cipher operation
  */
-static void fscrypt_complete(struct crypto_async_request *req, int res)
+static void page_crypt_complete(struct crypto_async_request *req, int res)
 {
 	struct fscrypt_completion_result *ecr = req->data;
 
@@ -170,7 +169,7 @@
 
 	skcipher_request_set_callback(
 		req, CRYPTO_TFM_REQ_MAY_BACKLOG | CRYPTO_TFM_REQ_MAY_SLEEP,
-		fscrypt_complete, &ecr);
+		page_crypt_complete, &ecr);
 
 	BUILD_BUG_ON(FS_XTS_TWEAK_SIZE < sizeof(index));
 	memcpy(xts_tweak, &index, sizeof(index));
diff --git a/fs/crypto/fname.c b/fs/crypto/fname.c
index 5d6d491..9a28133 100644
--- a/fs/crypto/fname.c
+++ b/fs/crypto/fname.c
@@ -10,21 +10,16 @@
  * This has not yet undergone a rigorous security audit.
  */
 
-#include <keys/encrypted-type.h>
-#include <keys/user-type.h>
 #include <linux/scatterlist.h>
 #include <linux/ratelimit.h>
 #include <linux/fscrypto.h>
 
-static u32 size_round_up(size_t size, size_t blksize)
-{
-	return ((size + blksize - 1) / blksize) * blksize;
-}
-
 /**
- * dir_crypt_complete() -
+ * fname_crypt_complete() - completion callback for filename crypto
+ * @req: The asynchronous cipher request context
+ * @res: The result of the cipher operation
  */
-static void dir_crypt_complete(struct crypto_async_request *req, int res)
+static void fname_crypt_complete(struct crypto_async_request *req, int res)
 {
 	struct fscrypt_completion_result *ecr = req->data;
 
@@ -35,11 +30,11 @@
 }
 
 /**
- * fname_encrypt() -
+ * fname_encrypt() - encrypt a filename
  *
- * This function encrypts the input filename, and returns the length of the
- * ciphertext. Errors are returned as negative numbers.  We trust the caller to
- * allocate sufficient memory to oname string.
+ * The caller must have allocated sufficient memory for the @oname string.
+ *
+ * Return: 0 on success, -errno on failure
  */
 static int fname_encrypt(struct inode *inode,
 			const struct qstr *iname, struct fscrypt_str *oname)
@@ -60,10 +55,9 @@
 	if (iname->len <= 0 || iname->len > lim)
 		return -EIO;
 
-	ciphertext_len = (iname->len < FS_CRYPTO_BLOCK_SIZE) ?
-					FS_CRYPTO_BLOCK_SIZE : iname->len;
-	ciphertext_len = size_round_up(ciphertext_len, padding);
-	ciphertext_len = (ciphertext_len > lim) ? lim : ciphertext_len;
+	ciphertext_len = max(iname->len, (u32)FS_CRYPTO_BLOCK_SIZE);
+	ciphertext_len = round_up(ciphertext_len, padding);
+	ciphertext_len = min(ciphertext_len, lim);
 
 	if (ciphertext_len <= sizeof(buf)) {
 		workbuf = buf;
@@ -84,7 +78,7 @@
 	}
 	skcipher_request_set_callback(req,
 			CRYPTO_TFM_REQ_MAY_BACKLOG | CRYPTO_TFM_REQ_MAY_SLEEP,
-			dir_crypt_complete, &ecr);
+			fname_crypt_complete, &ecr);
 
 	/* Copy the input */
 	memcpy(workbuf, iname->name, iname->len);
@@ -105,20 +99,22 @@
 	}
 	kfree(alloc_buf);
 	skcipher_request_free(req);
-	if (res < 0)
+	if (res < 0) {
 		printk_ratelimited(KERN_ERR
 				"%s: Error (error code %d)\n", __func__, res);
+		return res;
+	}
 
 	oname->len = ciphertext_len;
-	return res;
+	return 0;
 }
 
-/*
- * fname_decrypt()
- *	This function decrypts the input filename, and returns
- *	the length of the plaintext.
- *	Errors are returned as negative numbers.
- *	We trust the caller to allocate sufficient memory to oname string.
+/**
+ * fname_decrypt() - decrypt a filename
+ *
+ * The caller must have allocated sufficient memory for the @oname string.
+ *
+ * Return: 0 on success, -errno on failure
  */
 static int fname_decrypt(struct inode *inode,
 				const struct fscrypt_str *iname,
@@ -146,7 +142,7 @@
 	}
 	skcipher_request_set_callback(req,
 		CRYPTO_TFM_REQ_MAY_BACKLOG | CRYPTO_TFM_REQ_MAY_SLEEP,
-		dir_crypt_complete, &ecr);
+		fname_crypt_complete, &ecr);
 
 	/* Initialize IV */
 	memset(iv, 0, FS_CRYPTO_BLOCK_SIZE);
@@ -168,7 +164,7 @@
 	}
 
 	oname->len = strnlen(oname->name, iname->len);
-	return oname->len;
+	return 0;
 }
 
 static const char *lookup_table =
@@ -231,9 +227,8 @@
 
 	if (ci)
 		padding = 4 << (ci->ci_flags & FS_POLICY_FLAGS_PAD_MASK);
-	if (ilen < FS_CRYPTO_BLOCK_SIZE)
-		ilen = FS_CRYPTO_BLOCK_SIZE;
-	return size_round_up(ilen, padding);
+	ilen = max(ilen, (u32)FS_CRYPTO_BLOCK_SIZE);
+	return round_up(ilen, padding);
 }
 EXPORT_SYMBOL(fscrypt_fname_encrypted_size);
 
@@ -279,6 +274,10 @@
 /**
  * fscrypt_fname_disk_to_usr() - converts a filename from disk space to user
  * space
+ *
+ * The caller must have allocated sufficient memory for the @oname string.
+ *
+ * Return: 0 on success, -errno on failure
  */
 int fscrypt_fname_disk_to_usr(struct inode *inode,
 			u32 hash, u32 minor_hash,
@@ -287,13 +286,12 @@
 {
 	const struct qstr qname = FSTR_TO_QSTR(iname);
 	char buf[24];
-	int ret;
 
 	if (fscrypt_is_dot_dotdot(&qname)) {
 		oname->name[0] = '.';
 		oname->name[iname->len - 1] = '.';
 		oname->len = iname->len;
-		return oname->len;
+		return 0;
 	}
 
 	if (iname->len < FS_CRYPTO_BLOCK_SIZE)
@@ -303,9 +301,9 @@
 		return fname_decrypt(inode, iname, oname);
 
 	if (iname->len <= FS_FNAME_CRYPTO_DIGEST_SIZE) {
-		ret = digest_encode(iname->name, iname->len, oname->name);
-		oname->len = ret;
-		return ret;
+		oname->len = digest_encode(iname->name, iname->len,
+					   oname->name);
+		return 0;
 	}
 	if (hash) {
 		memcpy(buf, &hash, 4);
@@ -315,15 +313,18 @@
 	}
 	memcpy(buf + 8, iname->name + iname->len - 16, 16);
 	oname->name[0] = '_';
-	ret = digest_encode(buf, 24, oname->name + 1);
-	oname->len = ret + 1;
-	return ret + 1;
+	oname->len = 1 + digest_encode(buf, 24, oname->name + 1);
+	return 0;
 }
 EXPORT_SYMBOL(fscrypt_fname_disk_to_usr);
 
 /**
  * fscrypt_fname_usr_to_disk() - converts a filename from user space to disk
  * space
+ *
+ * The caller must have allocated sufficient memory for the @oname string.
+ *
+ * Return: 0 on success, -errno on failure
  */
 int fscrypt_fname_usr_to_disk(struct inode *inode,
 			const struct qstr *iname,
@@ -333,7 +334,7 @@
 		oname->name[0] = '.';
 		oname->name[iname->len - 1] = '.';
 		oname->len = iname->len;
-		return oname->len;
+		return 0;
 	}
 	if (inode->i_crypt_info)
 		return fname_encrypt(inode, iname, oname);
@@ -367,10 +368,10 @@
 	if (dir->i_crypt_info) {
 		ret = fscrypt_fname_alloc_buffer(dir, iname->len,
 							&fname->crypto_buf);
-		if (ret < 0)
+		if (ret)
 			return ret;
 		ret = fname_encrypt(dir, iname, &fname->crypto_buf);
-		if (ret < 0)
+		if (ret)
 			goto errout;
 		fname->disk_name.name = fname->crypto_buf.name;
 		fname->disk_name.len = fname->crypto_buf.len;
diff --git a/fs/crypto/keyinfo.c b/fs/crypto/keyinfo.c
index 1ac263e..82f0285 100644
--- a/fs/crypto/keyinfo.c
+++ b/fs/crypto/keyinfo.c
@@ -8,11 +8,8 @@
  * Written by Michael Halcrow, Ildar Muslukhov, and Uday Savagaonkar, 2015.
  */
 
-#include <keys/encrypted-type.h>
 #include <keys/user-type.h>
-#include <linux/random.h>
 #include <linux/scatterlist.h>
-#include <uapi/linux/keyctl.h>
 #include <linux/fscrypto.h>
 
 static void derive_crypt_complete(struct crypto_async_request *req, int rc)
@@ -139,6 +136,38 @@
 	return res;
 }
 
+static int determine_cipher_type(struct fscrypt_info *ci, struct inode *inode,
+				 const char **cipher_str_ret, int *keysize_ret)
+{
+	if (S_ISREG(inode->i_mode)) {
+		if (ci->ci_data_mode == FS_ENCRYPTION_MODE_AES_256_XTS) {
+			*cipher_str_ret = "xts(aes)";
+			*keysize_ret = FS_AES_256_XTS_KEY_SIZE;
+			return 0;
+		}
+		pr_warn_once("fscrypto: unsupported contents encryption mode "
+			     "%d for inode %lu\n",
+			     ci->ci_data_mode, inode->i_ino);
+		return -ENOKEY;
+	}
+
+	if (S_ISDIR(inode->i_mode) || S_ISLNK(inode->i_mode)) {
+		if (ci->ci_filename_mode == FS_ENCRYPTION_MODE_AES_256_CTS) {
+			*cipher_str_ret = "cts(cbc(aes))";
+			*keysize_ret = FS_AES_256_CTS_KEY_SIZE;
+			return 0;
+		}
+		pr_warn_once("fscrypto: unsupported filenames encryption mode "
+			     "%d for inode %lu\n",
+			     ci->ci_filename_mode, inode->i_ino);
+		return -ENOKEY;
+	}
+
+	pr_warn_once("fscrypto: unsupported file type %d for inode %lu\n",
+		     (inode->i_mode & S_IFMT), inode->i_ino);
+	return -ENOKEY;
+}
+
 static void put_crypt_info(struct fscrypt_info *ci)
 {
 	if (!ci)
@@ -155,8 +184,8 @@
 	struct fscrypt_context ctx;
 	struct crypto_skcipher *ctfm;
 	const char *cipher_str;
+	int keysize;
 	u8 raw_key[FS_MAX_KEY_SIZE];
-	u8 mode;
 	int res;
 
 	res = fscrypt_initialize();
@@ -179,13 +208,19 @@
 	if (res < 0) {
 		if (!fscrypt_dummy_context_enabled(inode))
 			return res;
+		ctx.format = FS_ENCRYPTION_CONTEXT_FORMAT_V1;
 		ctx.contents_encryption_mode = FS_ENCRYPTION_MODE_AES_256_XTS;
 		ctx.filenames_encryption_mode = FS_ENCRYPTION_MODE_AES_256_CTS;
 		ctx.flags = 0;
 	} else if (res != sizeof(ctx)) {
 		return -EINVAL;
 	}
-	res = 0;
+
+	if (ctx.format != FS_ENCRYPTION_CONTEXT_FORMAT_V1)
+		return -EINVAL;
+
+	if (ctx.flags & ~FS_POLICY_FLAGS_VALID)
+		return -EINVAL;
 
 	crypt_info = kmem_cache_alloc(fscrypt_info_cachep, GFP_NOFS);
 	if (!crypt_info)
@@ -198,27 +233,11 @@
 	crypt_info->ci_keyring_key = NULL;
 	memcpy(crypt_info->ci_master_key, ctx.master_key_descriptor,
 				sizeof(crypt_info->ci_master_key));
-	if (S_ISREG(inode->i_mode))
-		mode = crypt_info->ci_data_mode;
-	else if (S_ISDIR(inode->i_mode) || S_ISLNK(inode->i_mode))
-		mode = crypt_info->ci_filename_mode;
-	else
-		BUG();
 
-	switch (mode) {
-	case FS_ENCRYPTION_MODE_AES_256_XTS:
-		cipher_str = "xts(aes)";
-		break;
-	case FS_ENCRYPTION_MODE_AES_256_CTS:
-		cipher_str = "cts(cbc(aes))";
-		break;
-	default:
-		printk_once(KERN_WARNING
-			    "%s: unsupported key mode %d (ino %u)\n",
-			    __func__, mode, (unsigned) inode->i_ino);
-		res = -ENOKEY;
+	res = determine_cipher_type(crypt_info, inode, &cipher_str, &keysize);
+	if (res)
 		goto out;
-	}
+
 	if (fscrypt_dummy_context_enabled(inode)) {
 		memset(raw_key, 0x42, FS_AES_256_XTS_KEY_SIZE);
 		goto got_key;
@@ -253,7 +272,7 @@
 	crypt_info->ci_ctfm = ctfm;
 	crypto_skcipher_clear_flags(ctfm, ~0);
 	crypto_skcipher_set_flags(ctfm, CRYPTO_TFM_REQ_WEAK_KEY);
-	res = crypto_skcipher_setkey(ctfm, raw_key, fscrypt_key_size(mode));
+	res = crypto_skcipher_setkey(ctfm, raw_key, keysize);
 	if (res)
 		goto out;
 
diff --git a/fs/direct-io.c b/fs/direct-io.c
index 7c3ce73..fb9aa16 100644
--- a/fs/direct-io.c
+++ b/fs/direct-io.c
@@ -246,6 +246,9 @@
 		if ((dio->op == REQ_OP_READ) &&
 		    ((offset + transferred) > dio->i_size))
 			transferred = dio->i_size - offset;
+		/* ignore EFAULT if some IO has been done */
+		if (unlikely(ret == -EFAULT) && transferred)
+			ret = 0;
 	}
 
 	if (ret == 0)
diff --git a/fs/ext4/dir.c b/fs/ext4/dir.c
index 67415e0..e8b3650 100644
--- a/fs/ext4/dir.c
+++ b/fs/ext4/dir.c
@@ -260,11 +260,12 @@
 					/* Directory is encrypted */
 					err = fscrypt_fname_disk_to_usr(inode,
 						0, 0, &de_name, &fstr);
+					de_name = fstr;
 					fstr.len = save_len;
-					if (err < 0)
+					if (err)
 						goto errout;
 					if (!dir_emit(ctx,
-					    fstr.name, err,
+					    de_name.name, de_name.len,
 					    le32_to_cpu(de->inode),
 					    get_dtype(sb, de->file_type)))
 						goto done;
@@ -627,7 +628,7 @@
 		      int buf_size)
 {
 	struct ext4_dir_entry_2 *de;
-	int nlen, rlen;
+	int rlen;
 	unsigned int offset = 0;
 	char *top;
 
@@ -637,7 +638,6 @@
 		if (ext4_check_dir_entry(dir, NULL, de, bh,
 					 buf, buf_size, offset))
 			return -EFSCORRUPTED;
-		nlen = EXT4_DIR_REC_LEN(de->name_len);
 		rlen = ext4_rec_len_from_disk(de->rec_len, buf_size);
 		de = (struct ext4_dir_entry_2 *)((char *)de + rlen);
 		offset += rlen;
diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h
index ea31931..282a51b 100644
--- a/fs/ext4/ext4.h
+++ b/fs/ext4/ext4.h
@@ -262,6 +262,9 @@
 				 (s)->s_first_ino)
 #endif
 #define EXT4_BLOCK_ALIGN(size, blkbits)		ALIGN((size), (1 << (blkbits)))
+#define EXT4_MAX_BLOCKS(size, offset, blkbits) \
+	((EXT4_BLOCK_ALIGN(size + offset, blkbits) >> blkbits) - (offset >> \
+								  blkbits))
 
 /* Translate a block number to a cluster number */
 #define EXT4_B2C(sbi, blk)	((blk) >> (sbi)->s_cluster_bits)
@@ -1117,9 +1120,15 @@
 #define EXT4_MOUNT_POSIX_ACL		0x08000	/* POSIX Access Control Lists */
 #define EXT4_MOUNT_NO_AUTO_DA_ALLOC	0x10000	/* No auto delalloc mapping */
 #define EXT4_MOUNT_BARRIER		0x20000 /* Use block barriers */
-#define EXT4_MOUNT_QUOTA		0x80000 /* Some quota option set */
-#define EXT4_MOUNT_USRQUOTA		0x100000 /* "old" user quota */
-#define EXT4_MOUNT_GRPQUOTA		0x200000 /* "old" group quota */
+#define EXT4_MOUNT_QUOTA		0x40000 /* Some quota option set */
+#define EXT4_MOUNT_USRQUOTA		0x80000 /* "old" user quota,
+						 * enable enforcement for hidden
+						 * quota files */
+#define EXT4_MOUNT_GRPQUOTA		0x100000 /* "old" group quota, enable
+						  * enforcement for hidden quota
+						  * files */
+#define EXT4_MOUNT_PRJQUOTA		0x200000 /* Enable project quota
+						  * enforcement */
 #define EXT4_MOUNT_DIOREAD_NOLOCK	0x400000 /* Enable support for dio read nolocking */
 #define EXT4_MOUNT_JOURNAL_CHECKSUM	0x800000 /* Journal checksums */
 #define EXT4_MOUNT_JOURNAL_ASYNC_COMMIT	0x1000000 /* Journal Async Commit */
@@ -1636,26 +1645,6 @@
  * Feature set definitions
  */
 
-/* Use the ext4_{has,set,clear}_feature_* helpers; these will be removed */
-#define EXT4_HAS_COMPAT_FEATURE(sb,mask)			\
-	((EXT4_SB(sb)->s_es->s_feature_compat & cpu_to_le32(mask)) != 0)
-#define EXT4_HAS_RO_COMPAT_FEATURE(sb,mask)			\
-	((EXT4_SB(sb)->s_es->s_feature_ro_compat & cpu_to_le32(mask)) != 0)
-#define EXT4_HAS_INCOMPAT_FEATURE(sb,mask)			\
-	((EXT4_SB(sb)->s_es->s_feature_incompat & cpu_to_le32(mask)) != 0)
-#define EXT4_SET_COMPAT_FEATURE(sb,mask)			\
-	EXT4_SB(sb)->s_es->s_feature_compat |= cpu_to_le32(mask)
-#define EXT4_SET_RO_COMPAT_FEATURE(sb,mask)			\
-	EXT4_SB(sb)->s_es->s_feature_ro_compat |= cpu_to_le32(mask)
-#define EXT4_SET_INCOMPAT_FEATURE(sb,mask)			\
-	EXT4_SB(sb)->s_es->s_feature_incompat |= cpu_to_le32(mask)
-#define EXT4_CLEAR_COMPAT_FEATURE(sb,mask)			\
-	EXT4_SB(sb)->s_es->s_feature_compat &= ~cpu_to_le32(mask)
-#define EXT4_CLEAR_RO_COMPAT_FEATURE(sb,mask)			\
-	EXT4_SB(sb)->s_es->s_feature_ro_compat &= ~cpu_to_le32(mask)
-#define EXT4_CLEAR_INCOMPAT_FEATURE(sb,mask)			\
-	EXT4_SB(sb)->s_es->s_feature_incompat &= ~cpu_to_le32(mask)
-
 #define EXT4_FEATURE_COMPAT_DIR_PREALLOC	0x0001
 #define EXT4_FEATURE_COMPAT_IMAGIC_INODES	0x0002
 #define EXT4_FEATURE_COMPAT_HAS_JOURNAL		0x0004
diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c
index d7ccb7f..c930a01 100644
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -4679,6 +4679,7 @@
 	unsigned int credits;
 	loff_t epos;
 
+	BUG_ON(!ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS));
 	map.m_lblk = offset;
 	map.m_len = len;
 	/*
@@ -4693,13 +4694,7 @@
 	 * credits to insert 1 extent into extent tree
 	 */
 	credits = ext4_chunk_trans_blocks(inode, len);
-	/*
-	 * We can only call ext_depth() on extent based inodes
-	 */
-	if (ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS))
-		depth = ext_depth(inode);
-	else
-		depth = -1;
+	depth = ext_depth(inode);
 
 retry:
 	while (ret >= 0 && len) {
@@ -4966,13 +4961,8 @@
 
 	trace_ext4_fallocate_enter(inode, offset, len, mode);
 	lblk = offset >> blkbits;
-	/*
-	 * We can't just convert len to max_blocks because
-	 * If blocksize = 4096 offset = 3072 and len = 2048
-	 */
-	max_blocks = (EXT4_BLOCK_ALIGN(len + offset, blkbits) >> blkbits)
-		- lblk;
 
+	max_blocks = EXT4_MAX_BLOCKS(len, offset, blkbits);
 	flags = EXT4_GET_BLOCKS_CREATE_UNWRIT_EXT;
 	if (mode & FALLOC_FL_KEEP_SIZE)
 		flags |= EXT4_GET_BLOCKS_KEEP_SIZE;
@@ -5035,12 +5025,8 @@
 	unsigned int credits, blkbits = inode->i_blkbits;
 
 	map.m_lblk = offset >> blkbits;
-	/*
-	 * We can't just convert len to max_blocks because
-	 * If blocksize = 4096 offset = 3072 and len = 2048
-	 */
-	max_blocks = ((EXT4_BLOCK_ALIGN(len + offset, blkbits) >> blkbits) -
-		      map.m_lblk);
+	max_blocks = EXT4_MAX_BLOCKS(len, offset, blkbits);
+
 	/*
 	 * This is somewhat ugly but the idea is clear: When transaction is
 	 * reserved, everything goes into it. Otherwise we rather start several
@@ -5734,6 +5720,9 @@
 			up_write(&EXT4_I(inode)->i_data_sem);
 			goto out_stop;
 		}
+	} else {
+		ext4_ext_drop_refs(path);
+		kfree(path);
 	}
 
 	ret = ext4_es_remove_extent(inode, offset_lblk,
diff --git a/fs/ext4/file.c b/fs/ext4/file.c
index 28f542b..36d49cf 100644
--- a/fs/ext4/file.c
+++ b/fs/ext4/file.c
@@ -91,9 +91,7 @@
 static ssize_t
 ext4_file_write_iter(struct kiocb *iocb, struct iov_iter *from)
 {
-	struct file *file = iocb->ki_filp;
 	struct inode *inode = file_inode(iocb->ki_filp);
-	struct blk_plug plug;
 	int o_direct = iocb->ki_flags & IOCB_DIRECT;
 	int unaligned_aio = 0;
 	int overwrite = 0;
@@ -134,18 +132,16 @@
 	if (o_direct) {
 		size_t length = iov_iter_count(from);
 		loff_t pos = iocb->ki_pos;
-		blk_start_plug(&plug);
 
 		/* check whether we do a DIO overwrite or not */
 		if (ext4_should_dioread_nolock(inode) && !unaligned_aio &&
-		    !file->f_mapping->nrpages && pos + length <= i_size_read(inode)) {
+		    pos + length <= i_size_read(inode)) {
 			struct ext4_map_blocks map;
 			unsigned int blkbits = inode->i_blkbits;
 			int err, len;
 
 			map.m_lblk = pos >> blkbits;
-			map.m_len = (EXT4_BLOCK_ALIGN(pos + length, blkbits) >> blkbits)
-				- map.m_lblk;
+			map.m_len = EXT4_MAX_BLOCKS(length, pos, blkbits);
 			len = map.m_len;
 
 			err = ext4_map_blocks(NULL, inode, &map, 0);
@@ -171,8 +167,6 @@
 
 	if (ret > 0)
 		ret = generic_write_sync(iocb, ret);
-	if (o_direct)
-		blk_finish_plug(&plug);
 
 	return ret;
 
diff --git a/fs/ext4/fsync.c b/fs/ext4/fsync.c
index 5c43725..88effb1 100644
--- a/fs/ext4/fsync.c
+++ b/fs/ext4/fsync.c
@@ -61,6 +61,13 @@
 			break;
 		iput(inode);
 		inode = next;
+		/*
+		 * The directory inode may have gone through rmdir by now. But
+		 * the inode itself and its blocks are still allocated (we hold
+		 * a reference to the inode so it didn't go through
+		 * ext4_evict_inode()) and so we are safe to flush metadata
+		 * blocks and the inode.
+		 */
 		ret = sync_mapping_buffers(inode->i_mapping);
 		if (ret)
 			break;
@@ -107,7 +114,7 @@
 
 	if (!journal) {
 		ret = __generic_file_fsync(file, start, end, datasync);
-		if (!ret && !hlist_empty(&inode->i_dentry))
+		if (!ret)
 			ret = ext4_sync_parent(inode);
 		if (test_opt(inode->i_sb, BARRIER))
 			goto issue_flush;
diff --git a/fs/ext4/ialloc.c b/fs/ext4/ialloc.c
index 9e66cd1..170421e 100644
--- a/fs/ext4/ialloc.c
+++ b/fs/ext4/ialloc.c
@@ -802,7 +802,7 @@
 	} else
 		inode_init_owner(inode, dir, mode);
 
-	if (EXT4_HAS_RO_COMPAT_FEATURE(sb, EXT4_FEATURE_RO_COMPAT_PROJECT) &&
+	if (ext4_has_feature_project(sb) &&
 	    ext4_test_inode_flag(dir, EXT4_INODE_PROJINHERIT))
 		ei->i_projid = EXT4_I(dir)->i_projid;
 	else
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index c6ea25a..cd91882 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -647,11 +647,19 @@
 		/*
 		 * We have to zeroout blocks before inserting them into extent
 		 * status tree. Otherwise someone could look them up there and
-		 * use them before they are really zeroed.
+		 * use them before they are really zeroed. We also have to
+		 * unmap metadata before zeroing as otherwise writeback can
+		 * overwrite zeros with stale data from block device.
 		 */
 		if (flags & EXT4_GET_BLOCKS_ZERO &&
 		    map->m_flags & EXT4_MAP_MAPPED &&
 		    map->m_flags & EXT4_MAP_NEW) {
+			ext4_lblk_t i;
+
+			for (i = 0; i < map->m_len; i++) {
+				unmap_underlying_metadata(inode->i_sb->s_bdev,
+							  map->m_pblk + i);
+			}
 			ret = ext4_issue_zeroout(inode, map->m_lblk,
 						 map->m_pblk, map->m_len);
 			if (ret) {
@@ -1649,6 +1657,8 @@
 			BUG_ON(!PageLocked(page));
 			BUG_ON(PageWriteback(page));
 			if (invalidate) {
+				if (page_mapped(page))
+					clear_page_dirty_for_io(page);
 				block_invalidatepage(page, 0, PAGE_SIZE);
 				ClearPageUptodate(page);
 			}
@@ -3526,35 +3536,31 @@
 
 static ssize_t ext4_direct_IO_read(struct kiocb *iocb, struct iov_iter *iter)
 {
-	int unlocked = 0;
-	struct inode *inode = iocb->ki_filp->f_mapping->host;
+	struct address_space *mapping = iocb->ki_filp->f_mapping;
+	struct inode *inode = mapping->host;
 	ssize_t ret;
 
-	if (ext4_should_dioread_nolock(inode)) {
-		/*
-		 * Nolock dioread optimization may be dynamically disabled
-		 * via ext4_inode_block_unlocked_dio(). Check inode's state
-		 * while holding extra i_dio_count ref.
-		 */
-		inode_dio_begin(inode);
-		smp_mb();
-		if (unlikely(ext4_test_inode_state(inode,
-						    EXT4_STATE_DIOREAD_LOCK)))
-			inode_dio_end(inode);
-		else
-			unlocked = 1;
-	}
+	/*
+	 * Shared inode_lock is enough for us - it protects against concurrent
+	 * writes & truncates and since we take care of writing back page cache,
+	 * we are protected against page writeback as well.
+	 */
+	inode_lock_shared(inode);
 	if (IS_DAX(inode)) {
-		ret = dax_do_io(iocb, inode, iter, ext4_dio_get_block,
-				NULL, unlocked ? 0 : DIO_LOCKING);
+		ret = dax_do_io(iocb, inode, iter, ext4_dio_get_block, NULL, 0);
 	} else {
+		size_t count = iov_iter_count(iter);
+
+		ret = filemap_write_and_wait_range(mapping, iocb->ki_pos,
+						   iocb->ki_pos + count);
+		if (ret)
+			goto out_unlock;
 		ret = __blockdev_direct_IO(iocb, inode, inode->i_sb->s_bdev,
 					   iter, ext4_dio_get_block,
-					   NULL, NULL,
-					   unlocked ? 0 : DIO_LOCKING);
+					   NULL, NULL, 0);
 	}
-	if (unlocked)
-		inode_dio_end(inode);
+out_unlock:
+	inode_unlock_shared(inode);
 	return ret;
 }
 
@@ -3890,7 +3896,7 @@
 }
 
 /*
- * ext4_punch_hole: punches a hole in a file by releaseing the blocks
+ * ext4_punch_hole: punches a hole in a file by releasing the blocks
  * associated with the given offset and length
  *
  * @inode:  File inode
@@ -3919,7 +3925,7 @@
 	 * Write out all dirty pages to avoid race conditions
 	 * Then release them.
 	 */
-	if (mapping->nrpages && mapping_tagged(mapping, PAGECACHE_TAG_DIRTY)) {
+	if (mapping_tagged(mapping, PAGECACHE_TAG_DIRTY)) {
 		ret = filemap_write_and_wait_range(mapping, offset,
 						   offset + length - 1);
 		if (ret)
@@ -4414,7 +4420,7 @@
 
 int ext4_get_projid(struct inode *inode, kprojid_t *projid)
 {
-	if (!EXT4_HAS_RO_COMPAT_FEATURE(inode->i_sb, EXT4_FEATURE_RO_COMPAT_PROJECT))
+	if (!ext4_has_feature_project(inode->i_sb))
 		return -EOPNOTSUPP;
 	*projid = EXT4_I(inode)->i_projid;
 	return 0;
@@ -4481,7 +4487,7 @@
 	inode->i_mode = le16_to_cpu(raw_inode->i_mode);
 	i_uid = (uid_t)le16_to_cpu(raw_inode->i_uid_low);
 	i_gid = (gid_t)le16_to_cpu(raw_inode->i_gid_low);
-	if (EXT4_HAS_RO_COMPAT_FEATURE(sb, EXT4_FEATURE_RO_COMPAT_PROJECT) &&
+	if (ext4_has_feature_project(sb) &&
 	    EXT4_INODE_SIZE(sb) > EXT4_GOOD_OLD_INODE_SIZE &&
 	    EXT4_FITS_IN_INODE(raw_inode, ei, i_projid))
 		i_projid = (projid_t)le32_to_cpu(raw_inode->i_projid);
@@ -4814,14 +4820,14 @@
  * Fix up interoperability with old kernels. Otherwise, old inodes get
  * re-used with the upper 16 bits of the uid/gid intact
  */
-		if (!ei->i_dtime) {
+		if (ei->i_dtime && list_empty(&ei->i_orphan)) {
+			raw_inode->i_uid_high = 0;
+			raw_inode->i_gid_high = 0;
+		} else {
 			raw_inode->i_uid_high =
 				cpu_to_le16(high_16_bits(i_uid));
 			raw_inode->i_gid_high =
 				cpu_to_le16(high_16_bits(i_gid));
-		} else {
-			raw_inode->i_uid_high = 0;
-			raw_inode->i_gid_high = 0;
 		}
 	} else {
 		raw_inode->i_uid_low = cpu_to_le16(fs_high2lowuid(i_uid));
@@ -4885,8 +4891,7 @@
 		}
 	}
 
-	BUG_ON(!EXT4_HAS_RO_COMPAT_FEATURE(inode->i_sb,
-			EXT4_FEATURE_RO_COMPAT_PROJECT) &&
+	BUG_ON(!ext4_has_feature_project(inode->i_sb) &&
 	       i_projid != EXT4_DEF_PROJID);
 
 	if (EXT4_INODE_SIZE(inode->i_sb) > EXT4_GOOD_OLD_INODE_SIZE &&
diff --git a/fs/ext4/ioctl.c b/fs/ext4/ioctl.c
index 1bb7df5..bf5ae8e 100644
--- a/fs/ext4/ioctl.c
+++ b/fs/ext4/ioctl.c
@@ -19,8 +19,6 @@
 #include "ext4_jbd2.h"
 #include "ext4.h"
 
-#define MAX_32_NUM ((((unsigned long long) 1) << 32) - 1)
-
 /**
  * Swap memory between @a and @b for @len bytes.
  *
@@ -310,8 +308,7 @@
 	struct ext4_inode *raw_inode;
 	struct dquot *transfer_to[MAXQUOTAS] = { };
 
-	if (!EXT4_HAS_RO_COMPAT_FEATURE(sb,
-			EXT4_FEATURE_RO_COMPAT_PROJECT)) {
+	if (!ext4_has_feature_project(sb)) {
 		if (projid != EXT4_DEF_PROJID)
 			return -EOPNOTSUPP;
 		else
@@ -772,6 +769,9 @@
 #ifdef CONFIG_EXT4_FS_ENCRYPTION
 		struct fscrypt_policy policy;
 
+		if (!ext4_has_feature_encrypt(sb))
+			return -EOPNOTSUPP;
+
 		if (copy_from_user(&policy,
 				   (struct fscrypt_policy __user *)arg,
 				   sizeof(policy)))
@@ -842,8 +842,7 @@
 		ext4_get_inode_flags(ei);
 		fa.fsx_xflags = ext4_iflags_to_xflags(ei->i_flags & EXT4_FL_USER_VISIBLE);
 
-		if (EXT4_HAS_RO_COMPAT_FEATURE(inode->i_sb,
-				EXT4_FEATURE_RO_COMPAT_PROJECT)) {
+		if (ext4_has_feature_project(inode->i_sb)) {
 			fa.fsx_projid = (__u32)from_kprojid(&init_user_ns,
 				EXT4_I(inode)->i_projid);
 		}
diff --git a/fs/ext4/move_extent.c b/fs/ext4/move_extent.c
index a920c5d..6fc14de 100644
--- a/fs/ext4/move_extent.c
+++ b/fs/ext4/move_extent.c
@@ -598,6 +598,13 @@
 		return -EOPNOTSUPP;
 	}
 
+	if (ext4_encrypted_inode(orig_inode) ||
+	    ext4_encrypted_inode(donor_inode)) {
+		ext4_msg(orig_inode->i_sb, KERN_ERR,
+			 "Online defrag not supported for encrypted files");
+		return -EOPNOTSUPP;
+	}
+
 	/* Protect orig and donor inodes against a truncate */
 	lock_two_nondirectories(orig_inode, donor_inode);
 
diff --git a/fs/ext4/namei.c b/fs/ext4/namei.c
index 34c0142..c344b819 100644
--- a/fs/ext4/namei.c
+++ b/fs/ext4/namei.c
@@ -639,7 +639,7 @@
 					res = fscrypt_fname_alloc_buffer(
 						dir, len,
 						&fname_crypto_str);
-					if (res < 0)
+					if (res)
 						printk(KERN_WARNING "Error "
 							"allocating crypto "
 							"buffer--skipping "
@@ -647,7 +647,7 @@
 					res = fscrypt_fname_disk_to_usr(dir,
 						0, 0, &de_name,
 						&fname_crypto_str);
-					if (res < 0) {
+					if (res) {
 						printk(KERN_WARNING "Error "
 							"converting filename "
 							"from disk to usr"
@@ -1011,7 +1011,7 @@
 			err = fscrypt_fname_disk_to_usr(dir, hinfo->hash,
 					hinfo->minor_hash, &de_name,
 					&fname_crypto_str);
-			if (err < 0) {
+			if (err) {
 				count = err;
 				goto errout;
 			}
@@ -2044,33 +2044,31 @@
 	frame->entries = entries;
 	frame->at = entries;
 	frame->bh = bh;
-	bh = bh2;
 
 	retval = ext4_handle_dirty_dx_node(handle, dir, frame->bh);
 	if (retval)
 		goto out_frames;	
-	retval = ext4_handle_dirty_dirent_node(handle, dir, bh);
+	retval = ext4_handle_dirty_dirent_node(handle, dir, bh2);
 	if (retval)
 		goto out_frames;	
 
-	de = do_split(handle,dir, &bh, frame, &fname->hinfo);
+	de = do_split(handle,dir, &bh2, frame, &fname->hinfo);
 	if (IS_ERR(de)) {
 		retval = PTR_ERR(de);
 		goto out_frames;
 	}
-	dx_release(frames);
 
-	retval = add_dirent_to_buf(handle, fname, dir, inode, de, bh);
-	brelse(bh);
-	return retval;
+	retval = add_dirent_to_buf(handle, fname, dir, inode, de, bh2);
 out_frames:
 	/*
 	 * Even if the block split failed, we have to properly write
 	 * out all the changes we did so far. Otherwise we can end up
 	 * with corrupted filesystem.
 	 */
-	ext4_mark_inode_dirty(handle, dir);
+	if (retval)
+		ext4_mark_inode_dirty(handle, dir);
 	dx_release(frames);
+	brelse(bh2);
 	return retval;
 }
 
@@ -3144,7 +3142,7 @@
 		istr.name = (const unsigned char *) symname;
 		istr.len = len;
 		err = fscrypt_fname_usr_to_disk(inode, &istr, &ostr);
-		if (err < 0)
+		if (err)
 			goto err_drop_inode;
 		sd->len = cpu_to_le16(ostr.len);
 		disk_link.name = (char *) sd;
diff --git a/fs/ext4/page-io.c b/fs/ext4/page-io.c
index a6132a7..b4cbee9 100644
--- a/fs/ext4/page-io.c
+++ b/fs/ext4/page-io.c
@@ -405,14 +405,12 @@
 {
 	struct page *data_page = NULL;
 	struct inode *inode = page->mapping->host;
-	unsigned block_start, blocksize;
+	unsigned block_start;
 	struct buffer_head *bh, *head;
 	int ret = 0;
 	int nr_submitted = 0;
 	int nr_to_submit = 0;
 
-	blocksize = 1 << inode->i_blkbits;
-
 	BUG_ON(!PageLocked(page));
 	BUG_ON(PageWriteback(page));
 
diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index 3ec8708..6db81fb 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -78,6 +78,8 @@
 static void ext4_destroy_lazyinit_thread(void);
 static void ext4_unregister_li_request(struct super_block *sb);
 static void ext4_clear_request_list(void);
+static struct inode *ext4_get_journal_inode(struct super_block *sb,
+					    unsigned int journal_inum);
 
 /*
  * Lock ordering
@@ -1267,7 +1269,7 @@
 	Opt_usrjquota, Opt_grpjquota, Opt_offusrjquota, Opt_offgrpjquota,
 	Opt_jqfmt_vfsold, Opt_jqfmt_vfsv0, Opt_jqfmt_vfsv1, Opt_quota,
 	Opt_noquota, Opt_barrier, Opt_nobarrier, Opt_err,
-	Opt_usrquota, Opt_grpquota, Opt_i_version, Opt_dax,
+	Opt_usrquota, Opt_grpquota, Opt_prjquota, Opt_i_version, Opt_dax,
 	Opt_stripe, Opt_delalloc, Opt_nodelalloc, Opt_mblk_io_submit,
 	Opt_lazytime, Opt_nolazytime,
 	Opt_nomblk_io_submit, Opt_block_validity, Opt_noblock_validity,
@@ -1327,6 +1329,7 @@
 	{Opt_noquota, "noquota"},
 	{Opt_quota, "quota"},
 	{Opt_usrquota, "usrquota"},
+	{Opt_prjquota, "prjquota"},
 	{Opt_barrier, "barrier=%u"},
 	{Opt_barrier, "barrier"},
 	{Opt_nobarrier, "nobarrier"},
@@ -1546,8 +1549,11 @@
 							MOPT_SET | MOPT_Q},
 	{Opt_grpquota, EXT4_MOUNT_QUOTA | EXT4_MOUNT_GRPQUOTA,
 							MOPT_SET | MOPT_Q},
+	{Opt_prjquota, EXT4_MOUNT_QUOTA | EXT4_MOUNT_PRJQUOTA,
+							MOPT_SET | MOPT_Q},
 	{Opt_noquota, (EXT4_MOUNT_QUOTA | EXT4_MOUNT_USRQUOTA |
-		       EXT4_MOUNT_GRPQUOTA), MOPT_CLEAR | MOPT_Q},
+		       EXT4_MOUNT_GRPQUOTA | EXT4_MOUNT_PRJQUOTA),
+							MOPT_CLEAR | MOPT_Q},
 	{Opt_usrjquota, 0, MOPT_Q},
 	{Opt_grpjquota, 0, MOPT_Q},
 	{Opt_offusrjquota, 0, MOPT_Q},
@@ -1836,13 +1842,17 @@
 			return 0;
 	}
 #ifdef CONFIG_QUOTA
-	if (ext4_has_feature_quota(sb) &&
-	    (test_opt(sb, USRQUOTA) || test_opt(sb, GRPQUOTA))) {
-		ext4_msg(sb, KERN_INFO, "Quota feature enabled, usrquota and grpquota "
-			 "mount options ignored.");
-		clear_opt(sb, USRQUOTA);
-		clear_opt(sb, GRPQUOTA);
-	} else if (sbi->s_qf_names[USRQUOTA] || sbi->s_qf_names[GRPQUOTA]) {
+	/*
+	 * We do the test below only for project quotas. 'usrquota' and
+	 * 'grpquota' mount options are allowed even without quota feature
+	 * to support legacy quotas in quota files.
+	 */
+	if (test_opt(sb, PRJQUOTA) && !ext4_has_feature_project(sb)) {
+		ext4_msg(sb, KERN_ERR, "Project quota feature not enabled. "
+			 "Cannot enable project quota enforcement.");
+		return 0;
+	}
+	if (sbi->s_qf_names[USRQUOTA] || sbi->s_qf_names[GRPQUOTA]) {
 		if (test_opt(sb, USRQUOTA) && sbi->s_qf_names[USRQUOTA])
 			clear_opt(sb, USRQUOTA);
 
@@ -2741,7 +2751,6 @@
 	sb = elr->lr_super;
 	ngroups = EXT4_SB(sb)->s_groups_count;
 
-	sb_start_write(sb);
 	for (group = elr->lr_next_group; group < ngroups; group++) {
 		gdp = ext4_get_group_desc(sb, group, NULL);
 		if (!gdp) {
@@ -2768,8 +2777,6 @@
 		elr->lr_next_sched = jiffies + elr->lr_timeout;
 		elr->lr_next_group = group + 1;
 	}
-	sb_end_write(sb);
-
 	return ret;
 }
 
@@ -2834,19 +2841,43 @@
 			mutex_unlock(&eli->li_list_mtx);
 			goto exit_thread;
 		}
-
 		list_for_each_safe(pos, n, &eli->li_request_list) {
+			int err = 0;
+			int progress = 0;
 			elr = list_entry(pos, struct ext4_li_request,
 					 lr_request);
 
-			if (time_after_eq(jiffies, elr->lr_next_sched)) {
-				if (ext4_run_li_request(elr) != 0) {
-					/* error, remove the lazy_init job */
-					ext4_remove_li_request(elr);
-					continue;
-				}
+			if (time_before(jiffies, elr->lr_next_sched)) {
+				if (time_before(elr->lr_next_sched, next_wakeup))
+					next_wakeup = elr->lr_next_sched;
+				continue;
 			}
-
+			if (down_read_trylock(&elr->lr_super->s_umount)) {
+				if (sb_start_write_trylock(elr->lr_super)) {
+					progress = 1;
+					/*
+					 * We hold sb->s_umount, sb can not
+					 * be removed from the list, it is
+					 * now safe to drop li_list_mtx
+					 */
+					mutex_unlock(&eli->li_list_mtx);
+					err = ext4_run_li_request(elr);
+					sb_end_write(elr->lr_super);
+					mutex_lock(&eli->li_list_mtx);
+					n = pos->next;
+				}
+				up_read((&elr->lr_super->s_umount));
+			}
+			/* error, remove the lazy_init job */
+			if (err) {
+				ext4_remove_li_request(elr);
+				continue;
+			}
+			if (!progress) {
+				elr->lr_next_sched = jiffies +
+					(prandom_u32()
+					 % (EXT4_DEF_LI_MAX_START_DELAY * HZ));
+			}
 			if (time_before(elr->lr_next_sched, next_wakeup))
 				next_wakeup = elr->lr_next_sched;
 		}
@@ -3179,6 +3210,8 @@
 {
 	struct ext4_sb_info *sbi = EXT4_SB(sb);
 	struct ext4_super_block *es = sbi->s_es;
+	struct inode *j_inode;
+	unsigned int j_blocks, j_inum = le32_to_cpu(es->s_journal_inum);
 	ext4_group_t i, ngroups = ext4_get_groups_count(sb);
 	ext4_fsblk_t overhead = 0;
 	char *buf = (char *) get_zeroed_page(GFP_NOFS);
@@ -3209,10 +3242,23 @@
 			memset(buf, 0, PAGE_SIZE);
 		cond_resched();
 	}
-	/* Add the internal journal blocks as well */
+
+	/*
+	 * Add the internal journal blocks whether the journal has been
+	 * loaded or not
+	 */
 	if (sbi->s_journal && !sbi->journal_bdev)
 		overhead += EXT4_NUM_B2C(sbi, sbi->s_journal->j_maxlen);
-
+	else if (ext4_has_feature_journal(sb) && !sbi->s_journal) {
+		j_inode = ext4_get_journal_inode(sb, j_inum);
+		if (j_inode) {
+			j_blocks = j_inode->i_size >> sb->s_blocksize_bits;
+			overhead += EXT4_NUM_B2C(sbi, j_blocks);
+			iput(j_inode);
+		} else {
+			ext4_msg(sb, KERN_ERR, "can't get journal size");
+		}
+	}
 	sbi->s_overhead = overhead;
 	smp_wmb();
 	free_page((unsigned long) buf);
@@ -4208,18 +4254,16 @@
 	write_unlock(&journal->j_state_lock);
 }
 
-static journal_t *ext4_get_journal(struct super_block *sb,
-				   unsigned int journal_inum)
+static struct inode *ext4_get_journal_inode(struct super_block *sb,
+					     unsigned int journal_inum)
 {
 	struct inode *journal_inode;
-	journal_t *journal;
 
-	BUG_ON(!ext4_has_feature_journal(sb));
-
-	/* First, test for the existence of a valid inode on disk.  Bad
-	 * things happen if we iget() an unused inode, as the subsequent
-	 * iput() will try to delete it. */
-
+	/*
+	 * Test for the existence of a valid inode on disk.  Bad things
+	 * happen if we iget() an unused inode, as the subsequent iput()
+	 * will try to delete it.
+	 */
 	journal_inode = ext4_iget(sb, journal_inum);
 	if (IS_ERR(journal_inode)) {
 		ext4_msg(sb, KERN_ERR, "no journal found");
@@ -4239,6 +4283,20 @@
 		iput(journal_inode);
 		return NULL;
 	}
+	return journal_inode;
+}
+
+static journal_t *ext4_get_journal(struct super_block *sb,
+				   unsigned int journal_inum)
+{
+	struct inode *journal_inode;
+	journal_t *journal;
+
+	BUG_ON(!ext4_has_feature_journal(sb));
+
+	journal_inode = ext4_get_journal_inode(sb, journal_inum);
+	if (!journal_inode)
+		return NULL;
 
 	journal = jbd2_journal_init_inode(journal_inode);
 	if (!journal) {
@@ -5250,12 +5308,18 @@
 		le32_to_cpu(EXT4_SB(sb)->s_es->s_grp_quota_inum),
 		le32_to_cpu(EXT4_SB(sb)->s_es->s_prj_quota_inum)
 	};
+	bool quota_mopt[EXT4_MAXQUOTAS] = {
+		test_opt(sb, USRQUOTA),
+		test_opt(sb, GRPQUOTA),
+		test_opt(sb, PRJQUOTA),
+	};
 
 	sb_dqopt(sb)->flags |= DQUOT_QUOTA_SYS_FILE;
 	for (type = 0; type < EXT4_MAXQUOTAS; type++) {
 		if (qf_inums[type]) {
 			err = ext4_quota_enable(sb, type, QFMT_VFS_V1,
-						DQUOT_USAGE_ENABLED);
+				DQUOT_USAGE_ENABLED |
+				(quota_mopt[type] ? DQUOT_LIMITS_ENABLED : 0));
 			if (err) {
 				ext4_warning(sb,
 					"Failed to enable quota tracking "
diff --git a/fs/ext4/symlink.c b/fs/ext4/symlink.c
index 4d83d9e..fdf1c61 100644
--- a/fs/ext4/symlink.c
+++ b/fs/ext4/symlink.c
@@ -30,7 +30,6 @@
 	char *caddr, *paddr = NULL;
 	struct fscrypt_str cstr, pstr;
 	struct fscrypt_symlink_data *sd;
-	loff_t size = min_t(loff_t, i_size_read(inode), PAGE_SIZE - 1);
 	int res;
 	u32 max_size = inode->i_sb->s_blocksize;
 
@@ -49,7 +48,6 @@
 		if (IS_ERR(cpage))
 			return ERR_CAST(cpage);
 		caddr = page_address(cpage);
-		caddr[size] = 0;
 	}
 
 	/* Symlink is encrypted */
@@ -65,16 +63,14 @@
 	res = fscrypt_fname_alloc_buffer(inode, cstr.len, &pstr);
 	if (res)
 		goto errout;
-
-	res = fscrypt_fname_disk_to_usr(inode, 0, 0, &cstr, &pstr);
-	if (res < 0)
-		goto errout;
-
 	paddr = pstr.name;
 
+	res = fscrypt_fname_disk_to_usr(inode, 0, 0, &cstr, &pstr);
+	if (res)
+		goto errout;
+
 	/* Null-terminate the name */
-	if (res <= pstr.len)
-		paddr[res] = '\0';
+	paddr[pstr.len] = '\0';
 	if (cpage)
 		put_page(cpage);
 	set_delayed_call(done, kfree_link, paddr);
diff --git a/fs/ext4/xattr.c b/fs/ext4/xattr.c
index 2eb935c..c15d633 100644
--- a/fs/ext4/xattr.c
+++ b/fs/ext4/xattr.c
@@ -199,6 +199,8 @@
 	}
 
 	while (!IS_LAST_ENTRY(entry)) {
+		if (entry->e_value_block != 0)
+			return -EFSCORRUPTED;
 		if (entry->e_value_size != 0 &&
 		    (value_start + le16_to_cpu(entry->e_value_offs) <
 		     (void *)e + sizeof(__u32) ||
@@ -641,7 +643,7 @@
 				    size_t *min_offs, void *base, int *total)
 {
 	for (; !IS_LAST_ENTRY(last); last = EXT4_XATTR_NEXT(last)) {
-		if (!last->e_value_block && last->e_value_size) {
+		if (last->e_value_size) {
 			size_t offs = le16_to_cpu(last->e_value_offs);
 			if (offs < *min_offs)
 				*min_offs = offs;
@@ -661,7 +663,7 @@
 	/* Compute min_offs and last. */
 	last = s->first;
 	for (; !IS_LAST_ENTRY(last); last = EXT4_XATTR_NEXT(last)) {
-		if (!last->e_value_block && last->e_value_size) {
+		if (last->e_value_size) {
 			size_t offs = le16_to_cpu(last->e_value_offs);
 			if (offs < min_offs)
 				min_offs = offs;
@@ -669,7 +671,7 @@
 	}
 	free = min_offs - ((void *)last - s->base) - sizeof(__u32);
 	if (!s->not_found) {
-		if (!s->here->e_value_block && s->here->e_value_size) {
+		if (s->here->e_value_size) {
 			size_t size = le32_to_cpu(s->here->e_value_size);
 			free += EXT4_XATTR_SIZE(size);
 		}
@@ -691,7 +693,7 @@
 		s->here->e_name_len = name_len;
 		memcpy(s->here->e_name, i->name, name_len);
 	} else {
-		if (!s->here->e_value_block && s->here->e_value_size) {
+		if (s->here->e_value_size) {
 			void *first_val = s->base + min_offs;
 			size_t offs = le16_to_cpu(s->here->e_value_offs);
 			void *val = s->base + offs;
@@ -725,8 +727,7 @@
 			last = s->first;
 			while (!IS_LAST_ENTRY(last)) {
 				size_t o = le16_to_cpu(last->e_value_offs);
-				if (!last->e_value_block &&
-				    last->e_value_size && o < offs)
+				if (last->e_value_size && o < offs)
 					last->e_value_offs =
 						cpu_to_le16(o + size);
 				last = EXT4_XATTR_NEXT(last);
@@ -1318,18 +1319,19 @@
  */
 static void ext4_xattr_shift_entries(struct ext4_xattr_entry *entry,
 				     int value_offs_shift, void *to,
-				     void *from, size_t n, int blocksize)
+				     void *from, size_t n)
 {
 	struct ext4_xattr_entry *last = entry;
 	int new_offs;
 
+	/* We always shift xattr headers further thus offsets get lower */
+	BUG_ON(value_offs_shift > 0);
+
 	/* Adjust the value offsets of the entries */
 	for (; !IS_LAST_ENTRY(last); last = EXT4_XATTR_NEXT(last)) {
-		if (!last->e_value_block && last->e_value_size) {
+		if (last->e_value_size) {
 			new_offs = le16_to_cpu(last->e_value_offs) +
 							value_offs_shift;
-			BUG_ON(new_offs + le32_to_cpu(last->e_value_size)
-				 > blocksize);
 			last->e_value_offs = cpu_to_le16(new_offs);
 		}
 	}
@@ -1338,6 +1340,141 @@
 }
 
 /*
+ * Move xattr pointed to by 'entry' from inode into external xattr block
+ */
+static int ext4_xattr_move_to_block(handle_t *handle, struct inode *inode,
+				    struct ext4_inode *raw_inode,
+				    struct ext4_xattr_entry *entry)
+{
+	struct ext4_xattr_ibody_find *is = NULL;
+	struct ext4_xattr_block_find *bs = NULL;
+	char *buffer = NULL, *b_entry_name = NULL;
+	size_t value_offs, value_size;
+	struct ext4_xattr_info i = {
+		.value = NULL,
+		.value_len = 0,
+		.name_index = entry->e_name_index,
+	};
+	struct ext4_xattr_ibody_header *header = IHDR(inode, raw_inode);
+	int error;
+
+	value_offs = le16_to_cpu(entry->e_value_offs);
+	value_size = le32_to_cpu(entry->e_value_size);
+
+	is = kzalloc(sizeof(struct ext4_xattr_ibody_find), GFP_NOFS);
+	bs = kzalloc(sizeof(struct ext4_xattr_block_find), GFP_NOFS);
+	buffer = kmalloc(value_size, GFP_NOFS);
+	b_entry_name = kmalloc(entry->e_name_len + 1, GFP_NOFS);
+	if (!is || !bs || !buffer || !b_entry_name) {
+		error = -ENOMEM;
+		goto out;
+	}
+
+	is->s.not_found = -ENODATA;
+	bs->s.not_found = -ENODATA;
+	is->iloc.bh = NULL;
+	bs->bh = NULL;
+
+	/* Save the entry name and the entry value */
+	memcpy(buffer, (void *)IFIRST(header) + value_offs, value_size);
+	memcpy(b_entry_name, entry->e_name, entry->e_name_len);
+	b_entry_name[entry->e_name_len] = '\0';
+	i.name = b_entry_name;
+
+	error = ext4_get_inode_loc(inode, &is->iloc);
+	if (error)
+		goto out;
+
+	error = ext4_xattr_ibody_find(inode, &i, is);
+	if (error)
+		goto out;
+
+	/* Remove the chosen entry from the inode */
+	error = ext4_xattr_ibody_set(handle, inode, &i, is);
+	if (error)
+		goto out;
+
+	i.name = b_entry_name;
+	i.value = buffer;
+	i.value_len = value_size;
+	error = ext4_xattr_block_find(inode, &i, bs);
+	if (error)
+		goto out;
+
+	/* Add entry which was removed from the inode into the block */
+	error = ext4_xattr_block_set(handle, inode, &i, bs);
+	if (error)
+		goto out;
+	error = 0;
+out:
+	kfree(b_entry_name);
+	kfree(buffer);
+	if (is)
+		brelse(is->iloc.bh);
+	kfree(is);
+	kfree(bs);
+
+	return error;
+}
+
+static int ext4_xattr_make_inode_space(handle_t *handle, struct inode *inode,
+				       struct ext4_inode *raw_inode,
+				       int isize_diff, size_t ifree,
+				       size_t bfree, int *total_ino)
+{
+	struct ext4_xattr_ibody_header *header = IHDR(inode, raw_inode);
+	struct ext4_xattr_entry *small_entry;
+	struct ext4_xattr_entry *entry;
+	struct ext4_xattr_entry *last;
+	unsigned int entry_size;	/* EA entry size */
+	unsigned int total_size;	/* EA entry size + value size */
+	unsigned int min_total_size;
+	int error;
+
+	while (isize_diff > ifree) {
+		entry = NULL;
+		small_entry = NULL;
+		min_total_size = ~0U;
+		last = IFIRST(header);
+		/* Find the entry best suited to be pushed into EA block */
+		for (; !IS_LAST_ENTRY(last); last = EXT4_XATTR_NEXT(last)) {
+			total_size =
+			EXT4_XATTR_SIZE(le32_to_cpu(last->e_value_size)) +
+					EXT4_XATTR_LEN(last->e_name_len);
+			if (total_size <= bfree &&
+			    total_size < min_total_size) {
+				if (total_size + ifree < isize_diff) {
+					small_entry = last;
+				} else {
+					entry = last;
+					min_total_size = total_size;
+				}
+			}
+		}
+
+		if (entry == NULL) {
+			if (small_entry == NULL)
+				return -ENOSPC;
+			entry = small_entry;
+		}
+
+		entry_size = EXT4_XATTR_LEN(entry->e_name_len);
+		total_size = entry_size +
+			EXT4_XATTR_SIZE(le32_to_cpu(entry->e_value_size));
+		error = ext4_xattr_move_to_block(handle, inode, raw_inode,
+						 entry);
+		if (error)
+			return error;
+
+		*total_ino -= entry_size;
+		ifree += total_size;
+		bfree -= total_size;
+	}
+
+	return 0;
+}
+
+/*
  * Expand an inode by new_extra_isize bytes when EAs are present.
  * Returns 0 on success or negative error number on failure.
  */
@@ -1345,14 +1482,11 @@
 			       struct ext4_inode *raw_inode, handle_t *handle)
 {
 	struct ext4_xattr_ibody_header *header;
-	struct ext4_xattr_entry *entry, *last, *first;
 	struct buffer_head *bh = NULL;
-	struct ext4_xattr_ibody_find *is = NULL;
-	struct ext4_xattr_block_find *bs = NULL;
-	char *buffer = NULL, *b_entry_name = NULL;
-	size_t min_offs, free;
+	size_t min_offs;
+	size_t ifree, bfree;
 	int total_ino;
-	void *base, *start, *end;
+	void *base, *end;
 	int error = 0, tried_min_extra_isize = 0;
 	int s_min_extra_isize = le16_to_cpu(EXT4_SB(inode->i_sb)->s_es->s_min_extra_isize);
 	int isize_diff;	/* How much do we need to grow i_extra_isize */
@@ -1368,34 +1502,24 @@
 		goto out;
 
 	header = IHDR(inode, raw_inode);
-	entry = IFIRST(header);
 
 	/*
 	 * Check if enough free space is available in the inode to shift the
 	 * entries ahead by new_extra_isize.
 	 */
 
-	base = start = entry;
+	base = IFIRST(header);
 	end = (void *)raw_inode + EXT4_SB(inode->i_sb)->s_inode_size;
 	min_offs = end - base;
-	last = entry;
 	total_ino = sizeof(struct ext4_xattr_ibody_header);
 
 	error = xattr_check_inode(inode, header, end);
 	if (error)
 		goto cleanup;
 
-	free = ext4_xattr_free_space(last, &min_offs, base, &total_ino);
-	if (free >= isize_diff) {
-		entry = IFIRST(header);
-		ext4_xattr_shift_entries(entry,	EXT4_I(inode)->i_extra_isize
-				- new_extra_isize, (void *)raw_inode +
-				EXT4_GOOD_OLD_INODE_SIZE + new_extra_isize,
-				(void *)header, total_ino,
-				inode->i_sb->s_blocksize);
-		EXT4_I(inode)->i_extra_isize = new_extra_isize;
-		goto out;
-	}
+	ifree = ext4_xattr_free_space(base, &min_offs, base, &total_ino);
+	if (ifree >= isize_diff)
+		goto shift;
 
 	/*
 	 * Enough free space isn't available in the inode, check if
@@ -1413,146 +1537,44 @@
 			goto cleanup;
 		}
 		base = BHDR(bh);
-		first = BFIRST(bh);
 		end = bh->b_data + bh->b_size;
 		min_offs = end - base;
-		free = ext4_xattr_free_space(first, &min_offs, base, NULL);
-		if (free < isize_diff) {
+		bfree = ext4_xattr_free_space(BFIRST(bh), &min_offs, base,
+					      NULL);
+		if (bfree + ifree < isize_diff) {
 			if (!tried_min_extra_isize && s_min_extra_isize) {
 				tried_min_extra_isize++;
 				new_extra_isize = s_min_extra_isize;
 				brelse(bh);
 				goto retry;
 			}
-			error = -1;
+			error = -ENOSPC;
 			goto cleanup;
 		}
 	} else {
-		free = inode->i_sb->s_blocksize;
+		bfree = inode->i_sb->s_blocksize;
 	}
 
-	while (isize_diff > 0) {
-		size_t offs, size, entry_size;
-		struct ext4_xattr_entry *small_entry = NULL;
-		struct ext4_xattr_info i = {
-			.value = NULL,
-			.value_len = 0,
-		};
-		unsigned int total_size;  /* EA entry size + value size */
-		unsigned int shift_bytes; /* No. of bytes to shift EAs by? */
-		unsigned int min_total_size = ~0U;
-
-		is = kzalloc(sizeof(struct ext4_xattr_ibody_find), GFP_NOFS);
-		bs = kzalloc(sizeof(struct ext4_xattr_block_find), GFP_NOFS);
-		if (!is || !bs) {
-			error = -ENOMEM;
-			goto cleanup;
+	error = ext4_xattr_make_inode_space(handle, inode, raw_inode,
+					    isize_diff, ifree, bfree,
+					    &total_ino);
+	if (error) {
+		if (error == -ENOSPC && !tried_min_extra_isize &&
+		    s_min_extra_isize) {
+			tried_min_extra_isize++;
+			new_extra_isize = s_min_extra_isize;
+			brelse(bh);
+			goto retry;
 		}
-
-		is->s.not_found = -ENODATA;
-		bs->s.not_found = -ENODATA;
-		is->iloc.bh = NULL;
-		bs->bh = NULL;
-
-		last = IFIRST(header);
-		/* Find the entry best suited to be pushed into EA block */
-		entry = NULL;
-		for (; !IS_LAST_ENTRY(last); last = EXT4_XATTR_NEXT(last)) {
-			total_size =
-			EXT4_XATTR_SIZE(le32_to_cpu(last->e_value_size)) +
-					EXT4_XATTR_LEN(last->e_name_len);
-			if (total_size <= free && total_size < min_total_size) {
-				if (total_size < isize_diff) {
-					small_entry = last;
-				} else {
-					entry = last;
-					min_total_size = total_size;
-				}
-			}
-		}
-
-		if (entry == NULL) {
-			if (small_entry) {
-				entry = small_entry;
-			} else {
-				if (!tried_min_extra_isize &&
-				    s_min_extra_isize) {
-					tried_min_extra_isize++;
-					new_extra_isize = s_min_extra_isize;
-					kfree(is); is = NULL;
-					kfree(bs); bs = NULL;
-					brelse(bh);
-					goto retry;
-				}
-				error = -1;
-				goto cleanup;
-			}
-		}
-		offs = le16_to_cpu(entry->e_value_offs);
-		size = le32_to_cpu(entry->e_value_size);
-		entry_size = EXT4_XATTR_LEN(entry->e_name_len);
-		i.name_index = entry->e_name_index,
-		buffer = kmalloc(EXT4_XATTR_SIZE(size), GFP_NOFS);
-		b_entry_name = kmalloc(entry->e_name_len + 1, GFP_NOFS);
-		if (!buffer || !b_entry_name) {
-			error = -ENOMEM;
-			goto cleanup;
-		}
-		/* Save the entry name and the entry value */
-		memcpy(buffer, (void *)IFIRST(header) + offs,
-		       EXT4_XATTR_SIZE(size));
-		memcpy(b_entry_name, entry->e_name, entry->e_name_len);
-		b_entry_name[entry->e_name_len] = '\0';
-		i.name = b_entry_name;
-
-		error = ext4_get_inode_loc(inode, &is->iloc);
-		if (error)
-			goto cleanup;
-
-		error = ext4_xattr_ibody_find(inode, &i, is);
-		if (error)
-			goto cleanup;
-
-		/* Remove the chosen entry from the inode */
-		error = ext4_xattr_ibody_set(handle, inode, &i, is);
-		if (error)
-			goto cleanup;
-		total_ino -= entry_size;
-
-		entry = IFIRST(header);
-		if (entry_size + EXT4_XATTR_SIZE(size) >= isize_diff)
-			shift_bytes = isize_diff;
-		else
-			shift_bytes = entry_size + EXT4_XATTR_SIZE(size);
-		/* Adjust the offsets and shift the remaining entries ahead */
-		ext4_xattr_shift_entries(entry, -shift_bytes,
-			(void *)raw_inode + EXT4_GOOD_OLD_INODE_SIZE +
-			EXT4_I(inode)->i_extra_isize + shift_bytes,
-			(void *)header, total_ino, inode->i_sb->s_blocksize);
-
-		isize_diff -= shift_bytes;
-		EXT4_I(inode)->i_extra_isize += shift_bytes;
-		header = IHDR(inode, raw_inode);
-
-		i.name = b_entry_name;
-		i.value = buffer;
-		i.value_len = size;
-		error = ext4_xattr_block_find(inode, &i, bs);
-		if (error)
-			goto cleanup;
-
-		/* Add entry which was removed from the inode into the block */
-		error = ext4_xattr_block_set(handle, inode, &i, bs);
-		if (error)
-			goto cleanup;
-		kfree(b_entry_name);
-		kfree(buffer);
-		b_entry_name = NULL;
-		buffer = NULL;
-		brelse(is->iloc.bh);
-		kfree(is);
-		kfree(bs);
+		goto cleanup;
 	}
+shift:
+	/* Adjust the offsets and shift the remaining entries ahead */
+	ext4_xattr_shift_entries(IFIRST(header), EXT4_I(inode)->i_extra_isize
+			- new_extra_isize, (void *)raw_inode +
+			EXT4_GOOD_OLD_INODE_SIZE + new_extra_isize,
+			(void *)header, total_ino);
+	EXT4_I(inode)->i_extra_isize = new_extra_isize;
 	brelse(bh);
 out:
 	ext4_clear_inode_state(inode, EXT4_STATE_NO_EXPAND);
@@ -1560,12 +1582,6 @@
 	return 0;
 
 cleanup:
-	kfree(b_entry_name);
-	kfree(buffer);
-	if (is)
-		brelse(is->iloc.bh);
-	kfree(is);
-	kfree(bs);
 	brelse(bh);
 	/*
 	 * We deliberately leave EXT4_STATE_NO_EXPAND set here since inode
@@ -1734,7 +1750,7 @@
 		       *name++;
 	}
 
-	if (entry->e_value_block == 0 && entry->e_value_size != 0) {
+	if (entry->e_value_size != 0) {
 		__le32 *value = (__le32 *)((char *)header +
 			le16_to_cpu(entry->e_value_offs));
 		for (n = (le32_to_cpu(entry->e_value_size) +
diff --git a/fs/f2fs/dir.c b/fs/f2fs/dir.c
index cbf85f65..12b5836 100644
--- a/fs/f2fs/dir.c
+++ b/fs/f2fs/dir.c
@@ -813,12 +813,12 @@
 
 		if (f2fs_encrypted_inode(d->inode)) {
 			int save_len = fstr->len;
-			int ret;
+			int err;
 
-			ret = fscrypt_fname_disk_to_usr(d->inode,
+			err = fscrypt_fname_disk_to_usr(d->inode,
 						(u32)de->hash_code, 0,
 						&de_name, fstr);
-			if (ret < 0)
+			if (err)
 				return true;
 
 			de_name = *fstr;
diff --git a/fs/f2fs/namei.c b/fs/f2fs/namei.c
index 300aef8..5625b87 100644
--- a/fs/f2fs/namei.c
+++ b/fs/f2fs/namei.c
@@ -454,7 +454,7 @@
 		ostr.name = sd->encrypted_path;
 		ostr.len = disk_link.len;
 		err = fscrypt_fname_usr_to_disk(inode, &istr, &ostr);
-		if (err < 0)
+		if (err)
 			goto err_out;
 
 		sd->len = cpu_to_le16(ostr.len);
@@ -1051,7 +1051,7 @@
 		goto errout;
 
 	res = fscrypt_fname_disk_to_usr(inode, 0, 0, &cstr, &pstr);
-	if (res < 0)
+	if (res)
 		goto errout;
 
 	/* this is broken symlink case */
@@ -1063,7 +1063,7 @@
 	paddr = pstr.name;
 
 	/* Null-terminate the name */
-	paddr[res] = '\0';
+	paddr[pstr.len] = '\0';
 
 	put_page(cpage);
 	set_delayed_call(done, kfree_link, paddr);
diff --git a/fs/fuse/dev.c b/fs/fuse/dev.c
index c41bde2..70ea57c 100644
--- a/fs/fuse/dev.c
+++ b/fs/fuse/dev.c
@@ -728,7 +728,7 @@
 		struct pipe_buffer *buf = cs->pipebufs;
 
 		if (!cs->write) {
-			err = buf->ops->confirm(cs->pipe, buf);
+			err = pipe_buf_confirm(cs->pipe, buf);
 			if (err)
 				return err;
 
@@ -827,7 +827,7 @@
 
 	fuse_copy_finish(cs);
 
-	err = buf->ops->confirm(cs->pipe, buf);
+	err = pipe_buf_confirm(cs->pipe, buf);
 	if (err)
 		return err;
 
@@ -840,7 +840,7 @@
 	if (cs->len != PAGE_SIZE)
 		goto out_fallback;
 
-	if (buf->ops->steal(cs->pipe, buf) != 0)
+	if (pipe_buf_steal(cs->pipe, buf) != 0)
 		goto out_fallback;
 
 	newpage = buf->page;
@@ -1341,9 +1341,8 @@
 				    struct pipe_inode_info *pipe,
 				    size_t len, unsigned int flags)
 {
-	int ret;
+	int total, ret;
 	int page_nr = 0;
-	int do_wakeup = 0;
 	struct pipe_buffer *bufs;
 	struct fuse_copy_state cs;
 	struct fuse_dev *fud = fuse_get_dev(in);
@@ -1362,52 +1361,23 @@
 	if (ret < 0)
 		goto out;
 
-	ret = 0;
-	pipe_lock(pipe);
-
-	if (!pipe->readers) {
-		send_sig(SIGPIPE, current, 0);
-		if (!ret)
-			ret = -EPIPE;
-		goto out_unlock;
-	}
-
 	if (pipe->nrbufs + cs.nr_segs > pipe->buffers) {
 		ret = -EIO;
-		goto out_unlock;
+		goto out;
 	}
 
-	while (page_nr < cs.nr_segs) {
-		int newbuf = (pipe->curbuf + pipe->nrbufs) & (pipe->buffers - 1);
-		struct pipe_buffer *buf = pipe->bufs + newbuf;
-
-		buf->page = bufs[page_nr].page;
-		buf->offset = bufs[page_nr].offset;
-		buf->len = bufs[page_nr].len;
+	for (ret = total = 0; page_nr < cs.nr_segs; total += ret) {
 		/*
 		 * Need to be careful about this.  Having buf->ops in module
 		 * code can Oops if the buffer persists after module unload.
 		 */
-		buf->ops = &nosteal_pipe_buf_ops;
-
-		pipe->nrbufs++;
-		page_nr++;
-		ret += buf->len;
-
-		if (pipe->files)
-			do_wakeup = 1;
+		bufs[page_nr].ops = &nosteal_pipe_buf_ops;
+		ret = add_to_pipe(pipe, &bufs[page_nr++]);
+		if (unlikely(ret < 0))
+			break;
 	}
-
-out_unlock:
-	pipe_unlock(pipe);
-
-	if (do_wakeup) {
-		smp_mb();
-		if (waitqueue_active(&pipe->wait))
-			wake_up_interruptible(&pipe->wait);
-		kill_fasync(&pipe->fasync_readers, SIGIO, POLL_IN);
-	}
-
+	if (total)
+		ret = total;
 out:
 	for (; page_nr < cs.nr_segs; page_nr++)
 		put_page(bufs[page_nr].page);
@@ -1992,7 +1962,7 @@
 			pipe->curbuf = (pipe->curbuf + 1) & (pipe->buffers - 1);
 			pipe->nrbufs--;
 		} else {
-			ibuf->ops->get(pipe, ibuf);
+			pipe_buf_get(pipe, ibuf);
 			*obuf = *ibuf;
 			obuf->flags &= ~PIPE_BUF_FLAG_GIFT;
 			obuf->len = rem;
@@ -2014,10 +1984,9 @@
 
 	ret = fuse_dev_do_write(fud, &cs, len);
 
-	for (idx = 0; idx < nbuf; idx++) {
-		struct pipe_buffer *buf = &bufs[idx];
-		buf->ops->release(pipe, buf);
-	}
+	for (idx = 0; idx < nbuf; idx++)
+		pipe_buf_release(pipe, &bufs[idx]);
+
 out:
 	kfree(bufs);
 	return ret;
diff --git a/fs/gfs2/file.c b/fs/gfs2/file.c
index 360188f..e23ff70 100644
--- a/fs/gfs2/file.c
+++ b/fs/gfs2/file.c
@@ -954,30 +954,6 @@
 	return ret;
 }
 
-static ssize_t gfs2_file_splice_read(struct file *in, loff_t *ppos,
-				     struct pipe_inode_info *pipe, size_t len,
-				     unsigned int flags)
-{
-	struct inode *inode = in->f_mapping->host;
-	struct gfs2_inode *ip = GFS2_I(inode);
-	struct gfs2_holder gh;
-	int ret;
-
-	inode_lock(inode);
-
-	ret = gfs2_glock_nq_init(ip->i_gl, LM_ST_SHARED, 0, &gh);
-	if (ret) {
-		inode_unlock(inode);
-		return ret;
-	}
-
-	gfs2_glock_dq_uninit(&gh);
-	inode_unlock(inode);
-
-	return generic_file_splice_read(in, ppos, pipe, len, flags);
-}
-
-
 static ssize_t gfs2_file_splice_write(struct pipe_inode_info *pipe,
 				      struct file *out, loff_t *ppos,
 				      size_t len, unsigned int flags)
@@ -1140,7 +1116,7 @@
 	.fsync		= gfs2_fsync,
 	.lock		= gfs2_lock,
 	.flock		= gfs2_flock,
-	.splice_read	= gfs2_file_splice_read,
+	.splice_read	= generic_file_splice_read,
 	.splice_write	= gfs2_file_splice_write,
 	.setlease	= simple_nosetlease,
 	.fallocate	= gfs2_fallocate,
@@ -1168,7 +1144,7 @@
 	.open		= gfs2_open,
 	.release	= gfs2_release,
 	.fsync		= gfs2_fsync,
-	.splice_read	= gfs2_file_splice_read,
+	.splice_read	= generic_file_splice_read,
 	.splice_write	= gfs2_file_splice_write,
 	.setlease	= generic_setlease,
 	.fallocate	= gfs2_fallocate,
diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c
index 46261a6..927da49 100644
--- a/fs/jbd2/journal.c
+++ b/fs/jbd2/journal.c
@@ -1090,11 +1090,15 @@
  * very few fields yet: that has to wait until we have created the
  * journal structures from from scratch, or loaded them from disk. */
 
-static journal_t * journal_init_common (void)
+static journal_t *journal_init_common(struct block_device *bdev,
+			struct block_device *fs_dev,
+			unsigned long long start, int len, int blocksize)
 {
 	static struct lock_class_key jbd2_trans_commit_key;
 	journal_t *journal;
 	int err;
+	struct buffer_head *bh;
+	int n;
 
 	journal = kzalloc(sizeof(*journal), GFP_KERNEL);
 	if (!journal)
@@ -1131,6 +1135,32 @@
 	lockdep_init_map(&journal->j_trans_commit_map, "jbd2_handle",
 			 &jbd2_trans_commit_key, 0);
 
+	/* journal descriptor can store up to n blocks -bzzz */
+	journal->j_blocksize = blocksize;
+	journal->j_dev = bdev;
+	journal->j_fs_dev = fs_dev;
+	journal->j_blk_offset = start;
+	journal->j_maxlen = len;
+	n = journal->j_blocksize / sizeof(journal_block_tag_t);
+	journal->j_wbufsize = n;
+	journal->j_wbuf = kmalloc_array(n, sizeof(struct buffer_head *),
+					GFP_KERNEL);
+	if (!journal->j_wbuf) {
+		kfree(journal);
+		return NULL;
+	}
+
+	bh = getblk_unmovable(journal->j_dev, start, journal->j_blocksize);
+	if (!bh) {
+		pr_err("%s: Cannot get buffer for journal superblock\n",
+			__func__);
+		kfree(journal->j_wbuf);
+		kfree(journal);
+		return NULL;
+	}
+	journal->j_sb_buffer = bh;
+	journal->j_superblock = (journal_superblock_t *)bh->b_data;
+
 	return journal;
 }
 
@@ -1157,51 +1187,21 @@
  *  range of blocks on an arbitrary block device.
  *
  */
-journal_t * jbd2_journal_init_dev(struct block_device *bdev,
+journal_t *jbd2_journal_init_dev(struct block_device *bdev,
 			struct block_device *fs_dev,
 			unsigned long long start, int len, int blocksize)
 {
-	journal_t *journal = journal_init_common();
-	struct buffer_head *bh;
-	int n;
+	journal_t *journal;
 
+	journal = journal_init_common(bdev, fs_dev, start, len, blocksize);
 	if (!journal)
 		return NULL;
 
-	/* journal descriptor can store up to n blocks -bzzz */
-	journal->j_blocksize = blocksize;
-	journal->j_dev = bdev;
-	journal->j_fs_dev = fs_dev;
-	journal->j_blk_offset = start;
-	journal->j_maxlen = len;
 	bdevname(journal->j_dev, journal->j_devname);
 	strreplace(journal->j_devname, '/', '!');
 	jbd2_stats_proc_init(journal);
-	n = journal->j_blocksize / sizeof(journal_block_tag_t);
-	journal->j_wbufsize = n;
-	journal->j_wbuf = kmalloc(n * sizeof(struct buffer_head*), GFP_KERNEL);
-	if (!journal->j_wbuf) {
-		printk(KERN_ERR "%s: Can't allocate bhs for commit thread\n",
-			__func__);
-		goto out_err;
-	}
-
-	bh = __getblk(journal->j_dev, start, journal->j_blocksize);
-	if (!bh) {
-		printk(KERN_ERR
-		       "%s: Cannot get buffer for journal superblock\n",
-		       __func__);
-		goto out_err;
-	}
-	journal->j_sb_buffer = bh;
-	journal->j_superblock = (journal_superblock_t *)bh->b_data;
 
 	return journal;
-out_err:
-	kfree(journal->j_wbuf);
-	jbd2_stats_proc_exit(journal);
-	kfree(journal);
-	return NULL;
 }
 
 /**
@@ -1212,67 +1212,36 @@
  * the journal.  The inode must exist already, must support bmap() and
  * must have all data blocks preallocated.
  */
-journal_t * jbd2_journal_init_inode (struct inode *inode)
+journal_t *jbd2_journal_init_inode(struct inode *inode)
 {
-	struct buffer_head *bh;
-	journal_t *journal = journal_init_common();
+	journal_t *journal;
 	char *p;
-	int err;
-	int n;
 	unsigned long long blocknr;
 
+	blocknr = bmap(inode, 0);
+	if (!blocknr) {
+		pr_err("%s: Cannot locate journal superblock\n",
+			__func__);
+		return NULL;
+	}
+
+	jbd_debug(1, "JBD2: inode %s/%ld, size %lld, bits %d, blksize %ld\n",
+		  inode->i_sb->s_id, inode->i_ino, (long long) inode->i_size,
+		  inode->i_sb->s_blocksize_bits, inode->i_sb->s_blocksize);
+
+	journal = journal_init_common(inode->i_sb->s_bdev, inode->i_sb->s_bdev,
+			blocknr, inode->i_size >> inode->i_sb->s_blocksize_bits,
+			inode->i_sb->s_blocksize);
 	if (!journal)
 		return NULL;
 
-	journal->j_dev = journal->j_fs_dev = inode->i_sb->s_bdev;
 	journal->j_inode = inode;
 	bdevname(journal->j_dev, journal->j_devname);
 	p = strreplace(journal->j_devname, '/', '!');
 	sprintf(p, "-%lu", journal->j_inode->i_ino);
-	jbd_debug(1,
-		  "journal %p: inode %s/%ld, size %Ld, bits %d, blksize %ld\n",
-		  journal, inode->i_sb->s_id, inode->i_ino,
-		  (long long) inode->i_size,
-		  inode->i_sb->s_blocksize_bits, inode->i_sb->s_blocksize);
-
-	journal->j_maxlen = inode->i_size >> inode->i_sb->s_blocksize_bits;
-	journal->j_blocksize = inode->i_sb->s_blocksize;
 	jbd2_stats_proc_init(journal);
 
-	/* journal descriptor can store up to n blocks -bzzz */
-	n = journal->j_blocksize / sizeof(journal_block_tag_t);
-	journal->j_wbufsize = n;
-	journal->j_wbuf = kmalloc(n * sizeof(struct buffer_head*), GFP_KERNEL);
-	if (!journal->j_wbuf) {
-		printk(KERN_ERR "%s: Can't allocate bhs for commit thread\n",
-			__func__);
-		goto out_err;
-	}
-
-	err = jbd2_journal_bmap(journal, 0, &blocknr);
-	/* If that failed, give up */
-	if (err) {
-		printk(KERN_ERR "%s: Cannot locate journal superblock\n",
-		       __func__);
-		goto out_err;
-	}
-
-	bh = getblk_unmovable(journal->j_dev, blocknr, journal->j_blocksize);
-	if (!bh) {
-		printk(KERN_ERR
-		       "%s: Cannot get buffer for journal superblock\n",
-		       __func__);
-		goto out_err;
-	}
-	journal->j_sb_buffer = bh;
-	journal->j_superblock = (journal_superblock_t *)bh->b_data;
-
 	return journal;
-out_err:
-	kfree(journal->j_wbuf);
-	jbd2_stats_proc_exit(journal);
-	kfree(journal);
-	return NULL;
 }
 
 /*
diff --git a/fs/jbd2/transaction.c b/fs/jbd2/transaction.c
index b5bc3e2..3d8246a 100644
--- a/fs/jbd2/transaction.c
+++ b/fs/jbd2/transaction.c
@@ -159,6 +159,7 @@
 	read_unlock(&journal->j_state_lock);
 	if (need_to_start)
 		jbd2_log_start_commit(journal, tid);
+	jbd2_might_wait_for_commit(journal);
 	schedule();
 	finish_wait(&journal->j_wait_transaction_locked, &wait);
 }
@@ -182,8 +183,6 @@
 	int needed;
 	int total = blocks + rsv_blocks;
 
-	jbd2_might_wait_for_commit(journal);
-
 	/*
 	 * If the current transaction is locked down for commit, wait
 	 * for the lock to be released.
@@ -214,6 +213,7 @@
 		if (atomic_read(&journal->j_reserved_credits) + total >
 		    journal->j_max_transaction_buffers) {
 			read_unlock(&journal->j_state_lock);
+			jbd2_might_wait_for_commit(journal);
 			wait_event(journal->j_wait_reserved,
 				   atomic_read(&journal->j_reserved_credits) + total <=
 				   journal->j_max_transaction_buffers);
@@ -238,6 +238,7 @@
 	if (jbd2_log_space_left(journal) < jbd2_space_needed(journal)) {
 		atomic_sub(total, &t->t_outstanding_credits);
 		read_unlock(&journal->j_state_lock);
+		jbd2_might_wait_for_commit(journal);
 		write_lock(&journal->j_state_lock);
 		if (jbd2_log_space_left(journal) < jbd2_space_needed(journal))
 			__jbd2_log_wait_for_space(journal);
@@ -255,6 +256,7 @@
 		sub_reserved_credits(journal, rsv_blocks);
 		atomic_sub(total, &t->t_outstanding_credits);
 		read_unlock(&journal->j_state_lock);
+		jbd2_might_wait_for_commit(journal);
 		wait_event(journal->j_wait_reserved,
 			 atomic_read(&journal->j_reserved_credits) + rsv_blocks
 			 <= journal->j_max_transaction_buffers / 2);
diff --git a/fs/mbcache.c b/fs/mbcache.c
index eccda3a..c5bd19f 100644
--- a/fs/mbcache.c
+++ b/fs/mbcache.c
@@ -366,7 +366,11 @@
 	cache->c_shrink.count_objects = mb_cache_count;
 	cache->c_shrink.scan_objects = mb_cache_scan;
 	cache->c_shrink.seeks = DEFAULT_SEEKS;
-	register_shrinker(&cache->c_shrink);
+	if (register_shrinker(&cache->c_shrink)) {
+		kfree(cache->c_hash);
+		kfree(cache);
+		goto err_out;
+	}
 
 	INIT_WORK(&cache->c_shrink_work, mb_cache_shrink_worker);
 
diff --git a/fs/nfs/file.c b/fs/nfs/file.c
index ca699dd..2efbdde 100644
--- a/fs/nfs/file.c
+++ b/fs/nfs/file.c
@@ -182,29 +182,6 @@
 }
 EXPORT_SYMBOL_GPL(nfs_file_read);
 
-ssize_t
-nfs_file_splice_read(struct file *filp, loff_t *ppos,
-		     struct pipe_inode_info *pipe, size_t count,
-		     unsigned int flags)
-{
-	struct inode *inode = file_inode(filp);
-	ssize_t res;
-
-	dprintk("NFS: splice_read(%pD2, %lu@%Lu)\n",
-		filp, (unsigned long) count, (unsigned long long) *ppos);
-
-	nfs_start_io_read(inode);
-	res = nfs_revalidate_mapping(inode, filp->f_mapping);
-	if (!res) {
-		res = generic_file_splice_read(filp, ppos, pipe, count, flags);
-		if (res > 0)
-			nfs_add_stats(inode, NFSIOS_NORMALREADBYTES, res);
-	}
-	nfs_end_io_read(inode);
-	return res;
-}
-EXPORT_SYMBOL_GPL(nfs_file_splice_read);
-
 int
 nfs_file_mmap(struct file * file, struct vm_area_struct * vma)
 {
@@ -871,7 +848,7 @@
 	.fsync		= nfs_file_fsync,
 	.lock		= nfs_lock,
 	.flock		= nfs_flock,
-	.splice_read	= nfs_file_splice_read,
+	.splice_read	= generic_file_splice_read,
 	.splice_write	= iter_file_splice_write,
 	.check_flags	= nfs_check_flags,
 	.setlease	= simple_nosetlease,
diff --git a/fs/nfs/internal.h b/fs/nfs/internal.h
index da9e558..4b308a1 100644
--- a/fs/nfs/internal.h
+++ b/fs/nfs/internal.h
@@ -365,8 +365,6 @@
 int nfs_file_fsync(struct file *file, loff_t start, loff_t end, int datasync);
 loff_t nfs_file_llseek(struct file *, loff_t, int);
 ssize_t nfs_file_read(struct kiocb *, struct iov_iter *);
-ssize_t nfs_file_splice_read(struct file *, loff_t *, struct pipe_inode_info *,
-			     size_t, unsigned int);
 int nfs_file_mmap(struct file *, struct vm_area_struct *);
 ssize_t nfs_file_write(struct kiocb *, struct iov_iter *);
 int nfs_file_release(struct inode *, struct file *);
diff --git a/fs/nfs/nfs4file.c b/fs/nfs/nfs4file.c
index d085ad7..89a7795 100644
--- a/fs/nfs/nfs4file.c
+++ b/fs/nfs/nfs4file.c
@@ -248,7 +248,7 @@
 	.fsync		= nfs_file_fsync,
 	.lock		= nfs_lock,
 	.flock		= nfs_flock,
-	.splice_read	= nfs_file_splice_read,
+	.splice_read	= generic_file_splice_read,
 	.splice_write	= iter_file_splice_write,
 	.check_flags	= nfs_check_flags,
 	.setlease	= simple_nosetlease,
diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c
index 0b055bf..8f91639 100644
--- a/fs/ocfs2/file.c
+++ b/fs/ocfs2/file.c
@@ -2321,36 +2321,6 @@
 	return ret;
 }
 
-static ssize_t ocfs2_file_splice_read(struct file *in,
-				      loff_t *ppos,
-				      struct pipe_inode_info *pipe,
-				      size_t len,
-				      unsigned int flags)
-{
-	int ret = 0, lock_level = 0;
-	struct inode *inode = file_inode(in);
-
-	trace_ocfs2_file_splice_read(inode, in, in->f_path.dentry,
-			(unsigned long long)OCFS2_I(inode)->ip_blkno,
-			in->f_path.dentry->d_name.len,
-			in->f_path.dentry->d_name.name, len);
-
-	/*
-	 * See the comment in ocfs2_file_read_iter()
-	 */
-	ret = ocfs2_inode_lock_atime(inode, in->f_path.mnt, &lock_level);
-	if (ret < 0) {
-		mlog_errno(ret);
-		goto bail;
-	}
-	ocfs2_inode_unlock(inode, lock_level);
-
-	ret = generic_file_splice_read(in, ppos, pipe, len, flags);
-
-bail:
-	return ret;
-}
-
 static ssize_t ocfs2_file_read_iter(struct kiocb *iocb,
 				   struct iov_iter *to)
 {
@@ -2509,7 +2479,7 @@
 #endif
 	.lock		= ocfs2_lock,
 	.flock		= ocfs2_flock,
-	.splice_read	= ocfs2_file_splice_read,
+	.splice_read	= generic_file_splice_read,
 	.splice_write	= iter_file_splice_write,
 	.fallocate	= ocfs2_fallocate,
 };
@@ -2554,7 +2524,7 @@
 	.compat_ioctl   = ocfs2_compat_ioctl,
 #endif
 	.flock		= ocfs2_flock,
-	.splice_read	= ocfs2_file_splice_read,
+	.splice_read	= generic_file_splice_read,
 	.splice_write	= iter_file_splice_write,
 	.fallocate	= ocfs2_fallocate,
 };
diff --git a/fs/ocfs2/ocfs2_trace.h b/fs/ocfs2/ocfs2_trace.h
index f8f5fc5..0b58abc 100644
--- a/fs/ocfs2/ocfs2_trace.h
+++ b/fs/ocfs2/ocfs2_trace.h
@@ -1314,8 +1314,6 @@
 
 DEFINE_OCFS2_FILE_OPS(ocfs2_file_splice_write);
 
-DEFINE_OCFS2_FILE_OPS(ocfs2_file_splice_read);
-
 DEFINE_OCFS2_FILE_OPS(ocfs2_file_aio_read);
 
 DEFINE_OCFS2_ULL_ULL_ULL_EVENT(ocfs2_truncate_file);
diff --git a/fs/pipe.c b/fs/pipe.c
index 4ebe6b2..4fc422f 100644
--- a/fs/pipe.c
+++ b/fs/pipe.c
@@ -267,7 +267,6 @@
 		if (bufs) {
 			int curbuf = pipe->curbuf;
 			struct pipe_buffer *buf = pipe->bufs + curbuf;
-			const struct pipe_buf_operations *ops = buf->ops;
 			size_t chars = buf->len;
 			size_t written;
 			int error;
@@ -275,7 +274,7 @@
 			if (chars > total_len)
 				chars = total_len;
 
-			error = ops->confirm(pipe, buf);
+			error = pipe_buf_confirm(pipe, buf);
 			if (error) {
 				if (!ret)
 					ret = error;
@@ -299,8 +298,7 @@
 			}
 
 			if (!buf->len) {
-				buf->ops = NULL;
-				ops->release(pipe, buf);
+				pipe_buf_release(pipe, buf);
 				curbuf = (curbuf + 1) & (pipe->buffers - 1);
 				pipe->curbuf = curbuf;
 				pipe->nrbufs = --bufs;
@@ -383,11 +381,10 @@
 		int lastbuf = (pipe->curbuf + pipe->nrbufs - 1) &
 							(pipe->buffers - 1);
 		struct pipe_buffer *buf = pipe->bufs + lastbuf;
-		const struct pipe_buf_operations *ops = buf->ops;
 		int offset = buf->offset + buf->len;
 
-		if (ops->can_merge && offset + chars <= PAGE_SIZE) {
-			ret = ops->confirm(pipe, buf);
+		if (buf->ops->can_merge && offset + chars <= PAGE_SIZE) {
+			ret = pipe_buf_confirm(pipe, buf);
 			if (ret)
 				goto out;
 
@@ -664,7 +661,7 @@
 	for (i = 0; i < pipe->buffers; i++) {
 		struct pipe_buffer *buf = pipe->bufs + i;
 		if (buf->ops)
-			buf->ops->release(pipe, buf);
+			pipe_buf_release(pipe, buf);
 	}
 	if (pipe->tmp_page)
 		__free_page(pipe->tmp_page);
diff --git a/fs/splice.c b/fs/splice.c
index dd9bf7e..aa38901 100644
--- a/fs/splice.c
+++ b/fs/splice.c
@@ -183,82 +183,39 @@
 		       struct splice_pipe_desc *spd)
 {
 	unsigned int spd_pages = spd->nr_pages;
-	int ret, do_wakeup, page_nr;
+	int ret = 0, page_nr = 0;
 
 	if (!spd_pages)
 		return 0;
 
-	ret = 0;
-	do_wakeup = 0;
-	page_nr = 0;
-
-	pipe_lock(pipe);
-
-	for (;;) {
-		if (!pipe->readers) {
-			send_sig(SIGPIPE, current, 0);
-			if (!ret)
-				ret = -EPIPE;
-			break;
-		}
-
-		if (pipe->nrbufs < pipe->buffers) {
-			int newbuf = (pipe->curbuf + pipe->nrbufs) & (pipe->buffers - 1);
-			struct pipe_buffer *buf = pipe->bufs + newbuf;
-
-			buf->page = spd->pages[page_nr];
-			buf->offset = spd->partial[page_nr].offset;
-			buf->len = spd->partial[page_nr].len;
-			buf->private = spd->partial[page_nr].private;
-			buf->ops = spd->ops;
-			if (spd->flags & SPLICE_F_GIFT)
-				buf->flags |= PIPE_BUF_FLAG_GIFT;
-
-			pipe->nrbufs++;
-			page_nr++;
-			ret += buf->len;
-
-			if (pipe->files)
-				do_wakeup = 1;
-
-			if (!--spd->nr_pages)
-				break;
-			if (pipe->nrbufs < pipe->buffers)
-				continue;
-
-			break;
-		}
-
-		if (spd->flags & SPLICE_F_NONBLOCK) {
-			if (!ret)
-				ret = -EAGAIN;
-			break;
-		}
-
-		if (signal_pending(current)) {
-			if (!ret)
-				ret = -ERESTARTSYS;
-			break;
-		}
-
-		if (do_wakeup) {
-			smp_mb();
-			if (waitqueue_active(&pipe->wait))
-				wake_up_interruptible_sync(&pipe->wait);
-			kill_fasync(&pipe->fasync_readers, SIGIO, POLL_IN);
-			do_wakeup = 0;
-		}
-
-		pipe->waiting_writers++;
-		pipe_wait(pipe);
-		pipe->waiting_writers--;
+	if (unlikely(!pipe->readers)) {
+		send_sig(SIGPIPE, current, 0);
+		ret = -EPIPE;
+		goto out;
 	}
 
-	pipe_unlock(pipe);
+	while (pipe->nrbufs < pipe->buffers) {
+		int newbuf = (pipe->curbuf + pipe->nrbufs) & (pipe->buffers - 1);
+		struct pipe_buffer *buf = pipe->bufs + newbuf;
 
-	if (do_wakeup)
-		wakeup_pipe_readers(pipe);
+		buf->page = spd->pages[page_nr];
+		buf->offset = spd->partial[page_nr].offset;
+		buf->len = spd->partial[page_nr].len;
+		buf->private = spd->partial[page_nr].private;
+		buf->ops = spd->ops;
 
+		pipe->nrbufs++;
+		page_nr++;
+		ret += buf->len;
+
+		if (!--spd->nr_pages)
+			break;
+	}
+
+	if (!ret)
+		ret = -EAGAIN;
+
+out:
 	while (page_nr < spd_pages)
 		spd->spd_release(spd, page_nr++);
 
@@ -266,6 +223,26 @@
 }
 EXPORT_SYMBOL_GPL(splice_to_pipe);
 
+ssize_t add_to_pipe(struct pipe_inode_info *pipe, struct pipe_buffer *buf)
+{
+	int ret;
+
+	if (unlikely(!pipe->readers)) {
+		send_sig(SIGPIPE, current, 0);
+		ret = -EPIPE;
+	} else if (pipe->nrbufs == pipe->buffers) {
+		ret = -EAGAIN;
+	} else {
+		int newbuf = (pipe->curbuf + pipe->nrbufs) & (pipe->buffers - 1);
+		pipe->bufs[newbuf] = *buf;
+		pipe->nrbufs++;
+		return buf->len;
+	}
+	pipe_buf_release(pipe, buf);
+	return ret;
+}
+EXPORT_SYMBOL(add_to_pipe);
+
 void spd_release_page(struct splice_pipe_desc *spd, unsigned int i)
 {
 	put_page(spd->pages[i]);
@@ -303,207 +280,6 @@
 	kfree(spd->partial);
 }
 
-static int
-__generic_file_splice_read(struct file *in, loff_t *ppos,
-			   struct pipe_inode_info *pipe, size_t len,
-			   unsigned int flags)
-{
-	struct address_space *mapping = in->f_mapping;
-	unsigned int loff, nr_pages, req_pages;
-	struct page *pages[PIPE_DEF_BUFFERS];
-	struct partial_page partial[PIPE_DEF_BUFFERS];
-	struct page *page;
-	pgoff_t index, end_index;
-	loff_t isize;
-	int error, page_nr;
-	struct splice_pipe_desc spd = {
-		.pages = pages,
-		.partial = partial,
-		.nr_pages_max = PIPE_DEF_BUFFERS,
-		.flags = flags,
-		.ops = &page_cache_pipe_buf_ops,
-		.spd_release = spd_release_page,
-	};
-
-	if (splice_grow_spd(pipe, &spd))
-		return -ENOMEM;
-
-	index = *ppos >> PAGE_SHIFT;
-	loff = *ppos & ~PAGE_MASK;
-	req_pages = (len + loff + PAGE_SIZE - 1) >> PAGE_SHIFT;
-	nr_pages = min(req_pages, spd.nr_pages_max);
-
-	/*
-	 * Lookup the (hopefully) full range of pages we need.
-	 */
-	spd.nr_pages = find_get_pages_contig(mapping, index, nr_pages, spd.pages);
-	index += spd.nr_pages;
-
-	/*
-	 * If find_get_pages_contig() returned fewer pages than we needed,
-	 * readahead/allocate the rest and fill in the holes.
-	 */
-	if (spd.nr_pages < nr_pages)
-		page_cache_sync_readahead(mapping, &in->f_ra, in,
-				index, req_pages - spd.nr_pages);
-
-	error = 0;
-	while (spd.nr_pages < nr_pages) {
-		/*
-		 * Page could be there, find_get_pages_contig() breaks on
-		 * the first hole.
-		 */
-		page = find_get_page(mapping, index);
-		if (!page) {
-			/*
-			 * page didn't exist, allocate one.
-			 */
-			page = page_cache_alloc_cold(mapping);
-			if (!page)
-				break;
-
-			error = add_to_page_cache_lru(page, mapping, index,
-				   mapping_gfp_constraint(mapping, GFP_KERNEL));
-			if (unlikely(error)) {
-				put_page(page);
-				if (error == -EEXIST)
-					continue;
-				break;
-			}
-			/*
-			 * add_to_page_cache() locks the page, unlock it
-			 * to avoid convoluting the logic below even more.
-			 */
-			unlock_page(page);
-		}
-
-		spd.pages[spd.nr_pages++] = page;
-		index++;
-	}
-
-	/*
-	 * Now loop over the map and see if we need to start IO on any
-	 * pages, fill in the partial map, etc.
-	 */
-	index = *ppos >> PAGE_SHIFT;
-	nr_pages = spd.nr_pages;
-	spd.nr_pages = 0;
-	for (page_nr = 0; page_nr < nr_pages; page_nr++) {
-		unsigned int this_len;
-
-		if (!len)
-			break;
-
-		/*
-		 * this_len is the max we'll use from this page
-		 */
-		this_len = min_t(unsigned long, len, PAGE_SIZE - loff);
-		page = spd.pages[page_nr];
-
-		if (PageReadahead(page))
-			page_cache_async_readahead(mapping, &in->f_ra, in,
-					page, index, req_pages - page_nr);
-
-		/*
-		 * If the page isn't uptodate, we may need to start io on it
-		 */
-		if (!PageUptodate(page)) {
-			lock_page(page);
-
-			/*
-			 * Page was truncated, or invalidated by the
-			 * filesystem.  Redo the find/create, but this time the
-			 * page is kept locked, so there's no chance of another
-			 * race with truncate/invalidate.
-			 */
-			if (!page->mapping) {
-				unlock_page(page);
-retry_lookup:
-				page = find_or_create_page(mapping, index,
-						mapping_gfp_mask(mapping));
-
-				if (!page) {
-					error = -ENOMEM;
-					break;
-				}
-				put_page(spd.pages[page_nr]);
-				spd.pages[page_nr] = page;
-			}
-			/*
-			 * page was already under io and is now done, great
-			 */
-			if (PageUptodate(page)) {
-				unlock_page(page);
-				goto fill_it;
-			}
-
-			/*
-			 * need to read in the page
-			 */
-			error = mapping->a_ops->readpage(in, page);
-			if (unlikely(error)) {
-				/*
-				 * Re-lookup the page
-				 */
-				if (error == AOP_TRUNCATED_PAGE)
-					goto retry_lookup;
-
-				break;
-			}
-		}
-fill_it:
-		/*
-		 * i_size must be checked after PageUptodate.
-		 */
-		isize = i_size_read(mapping->host);
-		end_index = (isize - 1) >> PAGE_SHIFT;
-		if (unlikely(!isize || index > end_index))
-			break;
-
-		/*
-		 * if this is the last page, see if we need to shrink
-		 * the length and stop
-		 */
-		if (end_index == index) {
-			unsigned int plen;
-
-			/*
-			 * max good bytes in this page
-			 */
-			plen = ((isize - 1) & ~PAGE_MASK) + 1;
-			if (plen <= loff)
-				break;
-
-			/*
-			 * force quit after adding this page
-			 */
-			this_len = min(this_len, plen - loff);
-			len = this_len;
-		}
-
-		spd.partial[page_nr].offset = loff;
-		spd.partial[page_nr].len = this_len;
-		len -= this_len;
-		loff = 0;
-		spd.nr_pages++;
-		index++;
-	}
-
-	/*
-	 * Release any pages at the end, if we quit early. 'page_nr' is how far
-	 * we got, 'nr_pages' is how many pages are in the map.
-	 */
-	while (page_nr < nr_pages)
-		put_page(spd.pages[page_nr++]);
-	in->f_ra.prev_pos = (loff_t)index << PAGE_SHIFT;
-
-	if (spd.nr_pages)
-		error = splice_to_pipe(pipe, &spd);
-
-	splice_shrink_spd(&spd);
-	return error;
-}
-
 /**
  * generic_file_splice_read - splice data from file to a pipe
  * @in:		file to splice from
@@ -514,39 +290,53 @@
  *
  * Description:
  *    Will read pages from given file and fill them into a pipe. Can be
- *    used as long as the address_space operations for the source implements
- *    a readpage() hook.
+ *    used as long as it has more or less sane ->read_iter().
  *
  */
 ssize_t generic_file_splice_read(struct file *in, loff_t *ppos,
 				 struct pipe_inode_info *pipe, size_t len,
 				 unsigned int flags)
 {
-	loff_t isize, left;
-	int ret;
-
-	if (IS_DAX(in->f_mapping->host))
-		return default_file_splice_read(in, ppos, pipe, len, flags);
+	struct iov_iter to;
+	struct kiocb kiocb;
+	loff_t isize;
+	int idx, ret;
 
 	isize = i_size_read(in->f_mapping->host);
 	if (unlikely(*ppos >= isize))
 		return 0;
 
-	left = isize - *ppos;
-	if (unlikely(left < len))
-		len = left;
-
-	ret = __generic_file_splice_read(in, ppos, pipe, len, flags);
+	iov_iter_pipe(&to, ITER_PIPE | READ, pipe, len);
+	idx = to.idx;
+	init_sync_kiocb(&kiocb, in);
+	kiocb.ki_pos = *ppos;
+	ret = in->f_op->read_iter(&kiocb, &to);
 	if (ret > 0) {
-		*ppos += ret;
+		*ppos = kiocb.ki_pos;
 		file_accessed(in);
+	} else if (ret < 0) {
+		if (WARN_ON(to.idx != idx || to.iov_offset)) {
+			/*
+			 * a bogus ->read_iter() has copied something and still
+			 * returned an error instead of a short read.
+			 */
+			to.idx = idx;
+			to.iov_offset = 0;
+			iov_iter_advance(&to, 0); /* to free what was emitted */
+		}
+		/*
+		 * callers of ->splice_read() expect -EAGAIN on
+		 * "can't put anything in there", rather than -EFAULT.
+		 */
+		if (ret == -EFAULT)
+			ret = -EAGAIN;
 	}
 
 	return ret;
 }
 EXPORT_SYMBOL(generic_file_splice_read);
 
-static const struct pipe_buf_operations default_pipe_buf_ops = {
+const struct pipe_buf_operations default_pipe_buf_ops = {
 	.can_merge = 0,
 	.confirm = generic_pipe_buf_confirm,
 	.release = generic_pipe_buf_release,
@@ -570,7 +360,7 @@
 };
 EXPORT_SYMBOL(nosteal_pipe_buf_ops);
 
-static ssize_t kernel_readv(struct file *file, const struct iovec *vec,
+static ssize_t kernel_readv(struct file *file, const struct kvec *vec,
 			    unsigned long vlen, loff_t offset)
 {
 	mm_segment_t old_fs;
@@ -602,102 +392,70 @@
 }
 EXPORT_SYMBOL(kernel_write);
 
-ssize_t default_file_splice_read(struct file *in, loff_t *ppos,
+static ssize_t default_file_splice_read(struct file *in, loff_t *ppos,
 				 struct pipe_inode_info *pipe, size_t len,
 				 unsigned int flags)
 {
+	struct kvec *vec, __vec[PIPE_DEF_BUFFERS];
+	struct iov_iter to;
+	struct page **pages;
 	unsigned int nr_pages;
-	unsigned int nr_freed;
-	size_t offset;
-	struct page *pages[PIPE_DEF_BUFFERS];
-	struct partial_page partial[PIPE_DEF_BUFFERS];
-	struct iovec *vec, __vec[PIPE_DEF_BUFFERS];
+	size_t offset, dummy, copied = 0;
 	ssize_t res;
-	size_t this_len;
-	int error;
 	int i;
-	struct splice_pipe_desc spd = {
-		.pages = pages,
-		.partial = partial,
-		.nr_pages_max = PIPE_DEF_BUFFERS,
-		.flags = flags,
-		.ops = &default_pipe_buf_ops,
-		.spd_release = spd_release_page,
-	};
 
-	if (splice_grow_spd(pipe, &spd))
+	if (pipe->nrbufs == pipe->buffers)
+		return -EAGAIN;
+
+	/*
+	 * Try to keep page boundaries matching to source pagecache ones -
+	 * it probably won't be much help, but...
+	 */
+	offset = *ppos & ~PAGE_MASK;
+
+	iov_iter_pipe(&to, ITER_PIPE | READ, pipe, len + offset);
+
+	res = iov_iter_get_pages_alloc(&to, &pages, len + offset, &dummy);
+	if (res <= 0)
 		return -ENOMEM;
 
-	res = -ENOMEM;
+	nr_pages = res / PAGE_SIZE;
+
 	vec = __vec;
-	if (spd.nr_pages_max > PIPE_DEF_BUFFERS) {
-		vec = kmalloc(spd.nr_pages_max * sizeof(struct iovec), GFP_KERNEL);
-		if (!vec)
-			goto shrink_ret;
+	if (nr_pages > PIPE_DEF_BUFFERS) {
+		vec = kmalloc(nr_pages * sizeof(struct kvec), GFP_KERNEL);
+		if (unlikely(!vec)) {
+			res = -ENOMEM;
+			goto out;
+		}
 	}
 
-	offset = *ppos & ~PAGE_MASK;
-	nr_pages = (len + offset + PAGE_SIZE - 1) >> PAGE_SHIFT;
+	pipe->bufs[to.idx].offset = offset;
+	pipe->bufs[to.idx].len -= offset;
 
-	for (i = 0; i < nr_pages && i < spd.nr_pages_max && len; i++) {
-		struct page *page;
-
-		page = alloc_page(GFP_USER);
-		error = -ENOMEM;
-		if (!page)
-			goto err;
-
-		this_len = min_t(size_t, len, PAGE_SIZE - offset);
-		vec[i].iov_base = (void __user *) page_address(page);
+	for (i = 0; i < nr_pages; i++) {
+		size_t this_len = min_t(size_t, len, PAGE_SIZE - offset);
+		vec[i].iov_base = page_address(pages[i]) + offset;
 		vec[i].iov_len = this_len;
-		spd.pages[i] = page;
-		spd.nr_pages++;
 		len -= this_len;
 		offset = 0;
 	}
 
-	res = kernel_readv(in, vec, spd.nr_pages, *ppos);
-	if (res < 0) {
-		error = res;
-		goto err;
-	}
-
-	error = 0;
-	if (!res)
-		goto err;
-
-	nr_freed = 0;
-	for (i = 0; i < spd.nr_pages; i++) {
-		this_len = min_t(size_t, vec[i].iov_len, res);
-		spd.partial[i].offset = 0;
-		spd.partial[i].len = this_len;
-		if (!this_len) {
-			__free_page(spd.pages[i]);
-			spd.pages[i] = NULL;
-			nr_freed++;
-		}
-		res -= this_len;
-	}
-	spd.nr_pages -= nr_freed;
-
-	res = splice_to_pipe(pipe, &spd);
-	if (res > 0)
+	res = kernel_readv(in, vec, nr_pages, *ppos);
+	if (res > 0) {
+		copied = res;
 		*ppos += res;
+	}
 
-shrink_ret:
 	if (vec != __vec)
 		kfree(vec);
-	splice_shrink_spd(&spd);
+out:
+	for (i = 0; i < nr_pages; i++)
+		put_page(pages[i]);
+	kvfree(pages);
+	iov_iter_advance(&to, copied);	/* truncates and discards */
 	return res;
-
-err:
-	for (i = 0; i < spd.nr_pages; i++)
-		__free_page(spd.pages[i]);
-
-	res = error;
-	goto shrink_ret;
 }
-EXPORT_SYMBOL(default_file_splice_read);
 
 /*
  * Send 'sd->len' bytes to socket from 'sd->file' at position 'sd->pos'
@@ -757,13 +515,12 @@
 
 	while (pipe->nrbufs) {
 		struct pipe_buffer *buf = pipe->bufs + pipe->curbuf;
-		const struct pipe_buf_operations *ops = buf->ops;
 
 		sd->len = buf->len;
 		if (sd->len > sd->total_len)
 			sd->len = sd->total_len;
 
-		ret = buf->ops->confirm(pipe, buf);
+		ret = pipe_buf_confirm(pipe, buf);
 		if (unlikely(ret)) {
 			if (ret == -ENODATA)
 				ret = 0;
@@ -783,8 +540,7 @@
 		sd->total_len -= ret;
 
 		if (!buf->len) {
-			buf->ops = NULL;
-			ops->release(pipe, buf);
+			pipe_buf_release(pipe, buf);
 			pipe->curbuf = (pipe->curbuf + 1) & (pipe->buffers - 1);
 			pipe->nrbufs--;
 			if (pipe->files)
@@ -1003,7 +759,7 @@
 			if (idx == pipe->buffers - 1)
 				idx = -1;
 
-			ret = buf->ops->confirm(pipe, buf);
+			ret = pipe_buf_confirm(pipe, buf);
 			if (unlikely(ret)) {
 				if (ret == -ENODATA)
 					ret = 0;
@@ -1030,11 +786,9 @@
 		while (ret) {
 			struct pipe_buffer *buf = pipe->bufs + pipe->curbuf;
 			if (ret >= buf->len) {
-				const struct pipe_buf_operations *ops = buf->ops;
 				ret -= buf->len;
 				buf->len = 0;
-				buf->ops = NULL;
-				ops->release(pipe, buf);
+				pipe_buf_release(pipe, buf);
 				pipe->curbuf = (pipe->curbuf + 1) & (pipe->buffers - 1);
 				pipe->nrbufs--;
 				if (pipe->files)
@@ -1273,10 +1027,8 @@
 	for (i = 0; i < pipe->buffers; i++) {
 		struct pipe_buffer *buf = pipe->bufs + i;
 
-		if (buf->ops) {
-			buf->ops->release(pipe, buf);
-			buf->ops = NULL;
-		}
+		if (buf->ops)
+			pipe_buf_release(pipe, buf);
 	}
 
 	if (!bytes)
@@ -1342,6 +1094,20 @@
 }
 EXPORT_SYMBOL(do_splice_direct);
 
+static int wait_for_space(struct pipe_inode_info *pipe, unsigned flags)
+{
+	while (pipe->nrbufs == pipe->buffers) {
+		if (flags & SPLICE_F_NONBLOCK)
+			return -EAGAIN;
+		if (signal_pending(current))
+			return -ERESTARTSYS;
+		pipe->waiting_writers++;
+		pipe_wait(pipe);
+		pipe->waiting_writers--;
+	}
+	return 0;
+}
+
 static int splice_pipe_to_pipe(struct pipe_inode_info *ipipe,
 			       struct pipe_inode_info *opipe,
 			       size_t len, unsigned int flags);
@@ -1424,8 +1190,13 @@
 			offset = in->f_pos;
 		}
 
-		ret = do_splice_to(in, &offset, opipe, len, flags);
-
+		pipe_lock(opipe);
+		ret = wait_for_space(opipe, flags);
+		if (!ret)
+			ret = do_splice_to(in, &offset, opipe, len, flags);
+		pipe_unlock(opipe);
+		if (ret > 0)
+			wakeup_pipe_readers(opipe);
 		if (!off_in)
 			in->f_pos = offset;
 		else if (copy_to_user(off_in, &offset, sizeof(loff_t)))
@@ -1437,106 +1208,50 @@
 	return -EINVAL;
 }
 
-/*
- * Map an iov into an array of pages and offset/length tupples. With the
- * partial_page structure, we can map several non-contiguous ranges into
- * our ones pages[] map instead of splitting that operation into pieces.
- * Could easily be exported as a generic helper for other users, in which
- * case one would probably want to add a 'max_nr_pages' parameter as well.
- */
-static int get_iovec_page_array(const struct iovec __user *iov,
-				unsigned int nr_vecs, struct page **pages,
-				struct partial_page *partial, bool aligned,
-				unsigned int pipe_buffers)
+static int iter_to_pipe(struct iov_iter *from,
+			struct pipe_inode_info *pipe,
+			unsigned flags)
 {
-	int buffers = 0, error = 0;
+	struct pipe_buffer buf = {
+		.ops = &user_page_pipe_buf_ops,
+		.flags = flags
+	};
+	size_t total = 0;
+	int ret = 0;
+	bool failed = false;
 
-	while (nr_vecs) {
-		unsigned long off, npages;
-		struct iovec entry;
-		void __user *base;
-		size_t len;
-		int i;
+	while (iov_iter_count(from) && !failed) {
+		struct page *pages[16];
+		ssize_t copied;
+		size_t start;
+		int n;
 
-		error = -EFAULT;
-		if (copy_from_user(&entry, iov, sizeof(entry)))
+		copied = iov_iter_get_pages(from, pages, ~0UL, 16, &start);
+		if (copied <= 0) {
+			ret = copied;
 			break;
-
-		base = entry.iov_base;
-		len = entry.iov_len;
-
-		/*
-		 * Sanity check this iovec. 0 read succeeds.
-		 */
-		error = 0;
-		if (unlikely(!len))
-			break;
-		error = -EFAULT;
-		if (!access_ok(VERIFY_READ, base, len))
-			break;
-
-		/*
-		 * Get this base offset and number of pages, then map
-		 * in the user pages.
-		 */
-		off = (unsigned long) base & ~PAGE_MASK;
-
-		/*
-		 * If asked for alignment, the offset must be zero and the
-		 * length a multiple of the PAGE_SIZE.
-		 */
-		error = -EINVAL;
-		if (aligned && (off || len & ~PAGE_MASK))
-			break;
-
-		npages = (off + len + PAGE_SIZE - 1) >> PAGE_SHIFT;
-		if (npages > pipe_buffers - buffers)
-			npages = pipe_buffers - buffers;
-
-		error = get_user_pages_fast((unsigned long)base, npages,
-					0, &pages[buffers]);
-
-		if (unlikely(error <= 0))
-			break;
-
-		/*
-		 * Fill this contiguous range into the partial page map.
-		 */
-		for (i = 0; i < error; i++) {
-			const int plen = min_t(size_t, len, PAGE_SIZE - off);
-
-			partial[buffers].offset = off;
-			partial[buffers].len = plen;
-
-			off = 0;
-			len -= plen;
-			buffers++;
 		}
 
-		/*
-		 * We didn't complete this iov, stop here since it probably
-		 * means we have to move some of this into a pipe to
-		 * be able to continue.
-		 */
-		if (len)
-			break;
-
-		/*
-		 * Don't continue if we mapped fewer pages than we asked for,
-		 * or if we mapped the max number of pages that we have
-		 * room for.
-		 */
-		if (error < npages || buffers == pipe_buffers)
-			break;
-
-		nr_vecs--;
-		iov++;
+		for (n = 0; copied; n++, start = 0) {
+			int size = min_t(int, copied, PAGE_SIZE - start);
+			if (!failed) {
+				buf.page = pages[n];
+				buf.offset = start;
+				buf.len = size;
+				ret = add_to_pipe(pipe, &buf);
+				if (unlikely(ret < 0)) {
+					failed = true;
+				} else {
+					iov_iter_advance(from, ret);
+					total += ret;
+				}
+			} else {
+				put_page(pages[n]);
+			}
+			copied -= size;
+		}
 	}
-
-	if (buffers)
-		return buffers;
-
-	return error;
+	return total ? total : ret;
 }
 
 static int pipe_to_user(struct pipe_inode_info *pipe, struct pipe_buffer *buf,
@@ -1590,38 +1305,36 @@
  * as splice-from-memory, where the regular splice is splice-from-file (or
  * to file). In both cases the output is a pipe, naturally.
  */
-static long vmsplice_to_pipe(struct file *file, const struct iovec __user *iov,
+static long vmsplice_to_pipe(struct file *file, const struct iovec __user *uiov,
 			     unsigned long nr_segs, unsigned int flags)
 {
 	struct pipe_inode_info *pipe;
-	struct page *pages[PIPE_DEF_BUFFERS];
-	struct partial_page partial[PIPE_DEF_BUFFERS];
-	struct splice_pipe_desc spd = {
-		.pages = pages,
-		.partial = partial,
-		.nr_pages_max = PIPE_DEF_BUFFERS,
-		.flags = flags,
-		.ops = &user_page_pipe_buf_ops,
-		.spd_release = spd_release_page,
-	};
+	struct iovec iovstack[UIO_FASTIOV];
+	struct iovec *iov = iovstack;
+	struct iov_iter from;
 	long ret;
+	unsigned buf_flag = 0;
+
+	if (flags & SPLICE_F_GIFT)
+		buf_flag = PIPE_BUF_FLAG_GIFT;
 
 	pipe = get_pipe_info(file);
 	if (!pipe)
 		return -EBADF;
 
-	if (splice_grow_spd(pipe, &spd))
-		return -ENOMEM;
+	ret = import_iovec(WRITE, uiov, nr_segs,
+			   ARRAY_SIZE(iovstack), &iov, &from);
+	if (ret < 0)
+		return ret;
 
-	spd.nr_pages = get_iovec_page_array(iov, nr_segs, spd.pages,
-					    spd.partial, false,
-					    spd.nr_pages_max);
-	if (spd.nr_pages <= 0)
-		ret = spd.nr_pages;
-	else
-		ret = splice_to_pipe(pipe, &spd);
-
-	splice_shrink_spd(&spd);
+	pipe_lock(pipe);
+	ret = wait_for_space(pipe, flags);
+	if (!ret)
+		ret = iter_to_pipe(&from, pipe, buf_flag);
+	pipe_unlock(pipe);
+	if (ret > 0)
+		wakeup_pipe_readers(pipe);
+	kfree(iov);
 	return ret;
 }
 
@@ -1876,7 +1589,7 @@
 			 * Get a reference to this pipe buffer,
 			 * so we can copy the contents over.
 			 */
-			ibuf->ops->get(ipipe, ibuf);
+			pipe_buf_get(ipipe, ibuf);
 			*obuf = *ibuf;
 
 			/*
@@ -1948,7 +1661,7 @@
 		 * Get a reference to this pipe buffer,
 		 * so we can copy the contents over.
 		 */
-		ibuf->ops->get(ipipe, ibuf);
+		pipe_buf_get(ipipe, ibuf);
 
 		obuf = opipe->bufs + nbuf;
 		*obuf = *ibuf;
diff --git a/fs/xfs/xfs_file.c b/fs/xfs/xfs_file.c
index bac55c6..26acfbb 100644
--- a/fs/xfs/xfs_file.c
+++ b/fs/xfs/xfs_file.c
@@ -393,45 +393,6 @@
 	return ret;
 }
 
-STATIC ssize_t
-xfs_file_splice_read(
-	struct file		*infilp,
-	loff_t			*ppos,
-	struct pipe_inode_info	*pipe,
-	size_t			count,
-	unsigned int		flags)
-{
-	struct xfs_inode	*ip = XFS_I(infilp->f_mapping->host);
-	ssize_t			ret;
-
-	XFS_STATS_INC(ip->i_mount, xs_read_calls);
-
-	if (XFS_FORCED_SHUTDOWN(ip->i_mount))
-		return -EIO;
-
-	trace_xfs_file_splice_read(ip, count, *ppos);
-
-	/*
-	 * DAX inodes cannot ues the page cache for splice, so we have to push
-	 * them through the VFS IO path. This means it goes through
-	 * ->read_iter, which for us takes the XFS_IOLOCK_SHARED. Hence we
-	 * cannot lock the splice operation at this level for DAX inodes.
-	 */
-	if (IS_DAX(VFS_I(ip))) {
-		ret = default_file_splice_read(infilp, ppos, pipe, count,
-					       flags);
-		goto out;
-	}
-
-	xfs_rw_ilock(ip, XFS_IOLOCK_SHARED);
-	ret = generic_file_splice_read(infilp, ppos, pipe, count, flags);
-	xfs_rw_iunlock(ip, XFS_IOLOCK_SHARED);
-out:
-	if (ret > 0)
-		XFS_STATS_ADD(ip->i_mount, xs_read_bytes, ret);
-	return ret;
-}
-
 /*
  * Zero any on disk space between the current EOF and the new, larger EOF.
  *
@@ -1608,7 +1569,7 @@
 	.llseek		= xfs_file_llseek,
 	.read_iter	= xfs_file_read_iter,
 	.write_iter	= xfs_file_write_iter,
-	.splice_read	= xfs_file_splice_read,
+	.splice_read	= generic_file_splice_read,
 	.splice_write	= iter_file_splice_write,
 	.unlocked_ioctl	= xfs_file_ioctl,
 #ifdef CONFIG_COMPAT
diff --git a/fs/xfs/xfs_trace.h b/fs/xfs/xfs_trace.h
index c6b2b1d..16093c7 100644
--- a/fs/xfs/xfs_trace.h
+++ b/fs/xfs/xfs_trace.h
@@ -1170,7 +1170,6 @@
 DEFINE_RW_EVENT(xfs_file_buffered_write);
 DEFINE_RW_EVENT(xfs_file_direct_write);
 DEFINE_RW_EVENT(xfs_file_dax_write);
-DEFINE_RW_EVENT(xfs_file_splice_read);
 
 DECLARE_EVENT_CLASS(xfs_page_class,
 	TP_PROTO(struct inode *inode, struct page *page, unsigned long off,
diff --git a/include/dt-bindings/clock/gxbb-clkc.h b/include/dt-bindings/clock/gxbb-clkc.h
index ce4ad63..baade6f 100644
--- a/include/dt-bindings/clock/gxbb-clkc.h
+++ b/include/dt-bindings/clock/gxbb-clkc.h
@@ -11,7 +11,16 @@
 #define CLKID_FCLK_DIV3		5
 #define CLKID_FCLK_DIV4		6
 #define CLKID_CLK81		12
+#define CLKID_MPLL2		15
+#define CLKID_SPI		34
+#define CLKID_I2C		22
 #define CLKID_ETH		36
+#define CLKID_USB0		50
+#define CLKID_USB1		51
+#define CLKID_USB		55
+#define CLKID_USB1_DDR_BRIDGE	64
+#define CLKID_USB0_DDR_BRIDGE	65
+#define CLKID_AO_I2C		93
 #define CLKID_SD_EMMC_A		94
 #define CLKID_SD_EMMC_B		95
 #define CLKID_SD_EMMC_C		96
diff --git a/include/dt-bindings/clock/r7s72100-clock.h b/include/dt-bindings/clock/r7s72100-clock.h
index 5128f4d..3cd8138 100644
--- a/include/dt-bindings/clock/r7s72100-clock.h
+++ b/include/dt-bindings/clock/r7s72100-clock.h
@@ -25,6 +25,9 @@
 #define R7S72100_CLK_SCIF6	1
 #define R7S72100_CLK_SCIF7	0
 
+/* MSTP7 */
+#define R7S72100_CLK_ETHER	4
+
 /* MSTP9 */
 #define R7S72100_CLK_I2C0	7
 #define R7S72100_CLK_I2C1	6
diff --git a/include/dt-bindings/clock/r8a7794-clock.h b/include/dt-bindings/clock/r8a7794-clock.h
index a3491ba..9d02f53 100644
--- a/include/dt-bindings/clock/r8a7794-clock.h
+++ b/include/dt-bindings/clock/r8a7794-clock.h
@@ -67,6 +67,7 @@
 #define R8A7794_CLK_IRQC		7
 
 /* MSTP5 */
+#define R8A7794_CLK_AUDIO_DMAC0		2
 #define R8A7794_CLK_PWM			23
 
 /* MSTP7 */
@@ -107,6 +108,30 @@
 #define R8A7794_CLK_I2C1		30
 #define R8A7794_CLK_I2C0		31
 
+/* MSTP10 */
+#define R8A7794_CLK_SSI_ALL		5
+#define R8A7794_CLK_SSI9		6
+#define R8A7794_CLK_SSI8		7
+#define R8A7794_CLK_SSI7		8
+#define R8A7794_CLK_SSI6		9
+#define R8A7794_CLK_SSI5		10
+#define R8A7794_CLK_SSI4		11
+#define R8A7794_CLK_SSI3		12
+#define R8A7794_CLK_SSI2		13
+#define R8A7794_CLK_SSI1		14
+#define R8A7794_CLK_SSI0		15
+#define R8A7794_CLK_SCU_ALL		17
+#define R8A7794_CLK_SCU_DVC1		18
+#define R8A7794_CLK_SCU_DVC0		19
+#define R8A7794_CLK_SCU_CTU1_MIX1	20
+#define R8A7794_CLK_SCU_CTU0_MIX0	21
+#define R8A7794_CLK_SCU_SRC6		25
+#define R8A7794_CLK_SCU_SRC5		26
+#define R8A7794_CLK_SCU_SRC4		27
+#define R8A7794_CLK_SCU_SRC3		28
+#define R8A7794_CLK_SCU_SRC2		29
+#define R8A7794_CLK_SCU_SRC1		30
+
 /* MSTP11 */
 #define R8A7794_CLK_SCIFA3		6
 #define R8A7794_CLK_SCIFA4		7
diff --git a/include/dt-bindings/mfd/stm32f4-rcc.h b/include/dt-bindings/mfd/stm32f4-rcc.h
new file mode 100644
index 0000000..e98942d
--- /dev/null
+++ b/include/dt-bindings/mfd/stm32f4-rcc.h
@@ -0,0 +1,98 @@
+/*
+ * This header provides constants for the STM32F4 RCC IP
+ */
+
+#ifndef _DT_BINDINGS_MFD_STM32F4_RCC_H
+#define _DT_BINDINGS_MFD_STM32F4_RCC_H
+
+/* AHB1 */
+#define STM32F4_RCC_AHB1_GPIOA	0
+#define STM32F4_RCC_AHB1_GPIOB	1
+#define STM32F4_RCC_AHB1_GPIOC	2
+#define STM32F4_RCC_AHB1_GPIOD	3
+#define STM32F4_RCC_AHB1_GPIOE	4
+#define STM32F4_RCC_AHB1_GPIOF	5
+#define STM32F4_RCC_AHB1_GPIOG	6
+#define STM32F4_RCC_AHB1_GPIOH	7
+#define STM32F4_RCC_AHB1_GPIOI	8
+#define STM32F4_RCC_AHB1_GPIOJ	9
+#define STM32F4_RCC_AHB1_GPIOK	10
+#define STM32F4_RCC_AHB1_CRC	12
+#define STM32F4_RCC_AHB1_DMA1	21
+#define STM32F4_RCC_AHB1_DMA2	22
+#define STM32F4_RCC_AHB1_DMA2D	23
+#define STM32F4_RCC_AHB1_ETHMAC	25
+#define STM32F4_RCC_AHB1_OTGHS	29
+
+#define STM32F4_AHB1_RESET(bit) (STM32F4_RCC_AHB1_##bit + (0x10 * 8))
+#define STM32F4_AHB1_CLOCK(bit) (STM32F4_RCC_AHB1_##bit + (0x30 * 8))
+
+
+/* AHB2 */
+#define STM32F4_RCC_AHB2_DCMI	0
+#define STM32F4_RCC_AHB2_CRYP	4
+#define STM32F4_RCC_AHB2_HASH	5
+#define STM32F4_RCC_AHB2_RNG	6
+#define STM32F4_RCC_AHB2_OTGFS	7
+
+#define STM32F4_AHB2_RESET(bit)	(STM32F4_RCC_AHB2_##bit + (0x14 * 8))
+#define STM32F4_AHB2_CLOCK(bit)	(STM32F4_RCC_AHB2_##bit + (0x34 * 8))
+
+/* AHB3 */
+#define STM32F4_RCC_AHB3_FMC	0
+
+#define STM32F4_AHB3_RESET(bit)	(STM32F4_RCC_AHB3_##bit + (0x18 * 8))
+#define STM32F4_AHB3_CLOCK(bit)	(STM32F4_RCC_AHB3_##bit + (0x38 * 8))
+
+/* APB1 */
+#define STM32F4_RCC_APB1_TIM2	0
+#define STM32F4_RCC_APB1_TIM3	1
+#define STM32F4_RCC_APB1_TIM4	2
+#define STM32F4_RCC_APB1_TIM5	3
+#define STM32F4_RCC_APB1_TIM6	4
+#define STM32F4_RCC_APB1_TIM7	5
+#define STM32F4_RCC_APB1_TIM12	6
+#define STM32F4_RCC_APB1_TIM13	7
+#define STM32F4_RCC_APB1_TIM14	8
+#define STM32F4_RCC_APB1_WWDG	11
+#define STM32F4_RCC_APB1_SPI2	14
+#define STM32F4_RCC_APB1_SPI3	15
+#define STM32F4_RCC_APB1_UART2	17
+#define STM32F4_RCC_APB1_UART3	18
+#define STM32F4_RCC_APB1_UART4	19
+#define STM32F4_RCC_APB1_UART5	20
+#define STM32F4_RCC_APB1_I2C1	21
+#define STM32F4_RCC_APB1_I2C2	22
+#define STM32F4_RCC_APB1_I2C3	23
+#define STM32F4_RCC_APB1_CAN1	25
+#define STM32F4_RCC_APB1_CAN2	26
+#define STM32F4_RCC_APB1_PWR	28
+#define STM32F4_RCC_APB1_DAC	29
+#define STM32F4_RCC_APB1_UART7	30
+#define STM32F4_RCC_APB1_UART8	31
+
+#define STM32F4_APB1_RESET(bit)	(STM32F4_RCC_APB1_##bit + (0x20 * 8))
+#define STM32F4_APB1_CLOCK(bit)	(STM32F4_RCC_APB1_##bit + (0x40 * 8))
+
+/* APB2 */
+#define STM32F4_RCC_APB2_TIM1	0
+#define STM32F4_RCC_APB2_TIM8	1
+#define STM32F4_RCC_APB2_USART1	4
+#define STM32F4_RCC_APB2_USART6	5
+#define STM32F4_RCC_APB2_ADC	8
+#define STM32F4_RCC_APB2_SDIO	11
+#define STM32F4_RCC_APB2_SPI1	12
+#define STM32F4_RCC_APB2_SPI4	13
+#define STM32F4_RCC_APB2_SYSCFG	14
+#define STM32F4_RCC_APB2_TIM9	16
+#define STM32F4_RCC_APB2_TIM10	17
+#define STM32F4_RCC_APB2_TIM11	18
+#define STM32F4_RCC_APB2_SPI5	20
+#define STM32F4_RCC_APB2_SPI6	21
+#define STM32F4_RCC_APB2_SAI1	22
+#define STM32F4_RCC_APB2_LTDC	26
+
+#define STM32F4_APB2_RESET(bit)	(STM32F4_RCC_APB2_##bit + (0x24 * 8))
+#define STM32F4_APB2_CLOCK(bit)	(STM32F4_RCC_APB2_##bit + (0x44 * 8))
+
+#endif /* _DT_BINDINGS_MFD_STM32F4_RCC_H */
diff --git a/include/dt-bindings/pinctrl/samsung.h b/include/dt-bindings/pinctrl/samsung.h
new file mode 100644
index 0000000..6276eb7
--- /dev/null
+++ b/include/dt-bindings/pinctrl/samsung.h
@@ -0,0 +1,57 @@
+/*
+ * Samsung's Exynos pinctrl bindings
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ * Author: Krzysztof Kozlowski <krzk@kernel.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __DT_BINDINGS_PINCTRL_SAMSUNG_H__
+#define __DT_BINDINGS_PINCTRL_SAMSUNG_H__
+
+#define EXYNOS_PIN_PULL_NONE		0
+#define EXYNOS_PIN_PULL_DOWN		1
+#define EXYNOS_PIN_PULL_UP		3
+
+#define S3C64XX_PIN_PULL_NONE		0
+#define S3C64XX_PIN_PULL_DOWN		1
+#define S3C64XX_PIN_PULL_UP		2
+
+/* Pin function in power down mode */
+#define EXYNOS_PIN_PDN_OUT0		0
+#define EXYNOS_PIN_PDN_OUT1		1
+#define EXYNOS_PIN_PDN_INPUT		2
+#define EXYNOS_PIN_PDN_PREV		3
+
+/* Drive strengths for Exynos3250, Exynos4 (all) and Exynos5250 */
+#define EXYNOS4_PIN_DRV_LV1		0
+#define EXYNOS4_PIN_DRV_LV2		2
+#define EXYNOS4_PIN_DRV_LV3		1
+#define EXYNOS4_PIN_DRV_LV4		3
+
+/* Drive strengths for Exynos5260 */
+#define EXYNOS5260_PIN_DRV_LV1		0
+#define EXYNOS5260_PIN_DRV_LV2		1
+#define EXYNOS5260_PIN_DRV_LV4		2
+#define EXYNOS5260_PIN_DRV_LV6		3
+
+/* Drive strengths for Exynos5410, Exynos542x and Exynos5800 */
+#define EXYNOS5420_PIN_DRV_LV1		0
+#define EXYNOS5420_PIN_DRV_LV2		1
+#define EXYNOS5420_PIN_DRV_LV3		2
+#define EXYNOS5420_PIN_DRV_LV4		3
+
+#define EXYNOS_PIN_FUNC_INPUT		0
+#define EXYNOS_PIN_FUNC_OUTPUT		1
+#define EXYNOS_PIN_FUNC_2		2
+#define EXYNOS_PIN_FUNC_3		3
+#define EXYNOS_PIN_FUNC_4		4
+#define EXYNOS_PIN_FUNC_5		5
+#define EXYNOS_PIN_FUNC_6		6
+#define EXYNOS_PIN_FUNC_F		0xf
+
+#endif /* __DT_BINDINGS_PINCTRL_SAMSUNG_H__ */
diff --git a/include/dt-bindings/soc/rockchip,boot-mode.h b/include/dt-bindings/soc/rockchip,boot-mode.h
new file mode 100644
index 0000000..ae7c867
--- /dev/null
+++ b/include/dt-bindings/soc/rockchip,boot-mode.h
@@ -0,0 +1,15 @@
+#ifndef __ROCKCHIP_BOOT_MODE_H
+#define __ROCKCHIP_BOOT_MODE_H
+
+/*high 24 bits is tag, low 8 bits is type*/
+#define REBOOT_FLAG		0x5242C300
+/* normal boot */
+#define BOOT_NORMAL		(REBOOT_FLAG + 0)
+/* enter bootloader rockusb mode */
+#define BOOT_BL_DOWNLOAD	(REBOOT_FLAG + 1)
+/* enter recovery */
+#define BOOT_RECOVERY		(REBOOT_FLAG + 3)
+ /* enter fastboot mode */
+#define BOOT_FASTBOOT		(REBOOT_FLAG + 9)
+
+#endif
diff --git a/include/linux/bio.h b/include/linux/bio.h
index 23ddf4b..97cb48f 100644
--- a/include/linux/bio.h
+++ b/include/linux/bio.h
@@ -1,6 +1,4 @@
 /*
- * 2.5 block I/O model
- *
  * Copyright (C) 2001 Jens Axboe <axboe@suse.de>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -461,6 +459,7 @@
 
 extern void bio_copy_data(struct bio *dst, struct bio *src);
 extern int bio_alloc_pages(struct bio *bio, gfp_t gfp);
+extern void bio_free_pages(struct bio *bio);
 
 extern struct bio *bio_copy_user_iov(struct request_queue *,
 				     struct rq_map_data *,
diff --git a/include/linux/blk-cgroup.h b/include/linux/blk-cgroup.h
index 10648e3..cbdbf34 100644
--- a/include/linux/blk-cgroup.h
+++ b/include/linux/blk-cgroup.h
@@ -45,7 +45,7 @@
 	spinlock_t			lock;
 
 	struct radix_tree_root		blkg_tree;
-	struct blkcg_gq			*blkg_hint;
+	struct blkcg_gq	__rcu		*blkg_hint;
 	struct hlist_head		blkg_list;
 
 	struct blkcg_policy_data	*cpd[BLKCG_MAX_POLS];
diff --git a/include/linux/blk-mq.h b/include/linux/blk-mq.h
index e43bbff..5daa0ef 100644
--- a/include/linux/blk-mq.h
+++ b/include/linux/blk-mq.h
@@ -2,6 +2,7 @@
 #define BLK_MQ_H
 
 #include <linux/blkdev.h>
+#include <linux/sbitmap.h>
 
 struct blk_mq_tags;
 struct blk_flush_queue;
@@ -12,21 +13,14 @@
 	int (*notify)(void *data, unsigned long action, unsigned int cpu);
 };
 
-struct blk_mq_ctxmap {
-	unsigned int size;
-	unsigned int bits_per_word;
-	struct blk_align_bitmap *map;
-};
-
 struct blk_mq_hw_ctx {
 	struct {
 		spinlock_t		lock;
 		struct list_head	dispatch;
+		unsigned long		state;		/* BLK_MQ_S_* flags */
 	} ____cacheline_aligned_in_smp;
 
-	unsigned long		state;		/* BLK_MQ_S_* flags */
-	struct delayed_work	run_work;
-	struct delayed_work	delay_work;
+	struct work_struct	run_work;
 	cpumask_var_t		cpumask;
 	int			next_cpu;
 	int			next_cpu_batch;
@@ -38,10 +32,10 @@
 
 	void			*driver_data;
 
-	struct blk_mq_ctxmap	ctx_map;
+	struct sbitmap		ctx_map;
 
-	unsigned int		nr_ctx;
 	struct blk_mq_ctx	**ctxs;
+	unsigned int		nr_ctx;
 
 	atomic_t		wait_index;
 
@@ -49,7 +43,7 @@
 
 	unsigned long		queued;
 	unsigned long		run;
-#define BLK_MQ_MAX_DISPATCH_ORDER	10
+#define BLK_MQ_MAX_DISPATCH_ORDER	7
 	unsigned long		dispatched[BLK_MQ_MAX_DISPATCH_ORDER];
 
 	unsigned int		numa_node;
@@ -57,9 +51,12 @@
 
 	atomic_t		nr_active;
 
+	struct delayed_work	delay_work;
+
 	struct blk_mq_cpu_notifier	cpu_notifier;
 	struct kobject		kobj;
 
+	unsigned long		poll_considered;
 	unsigned long		poll_invoked;
 	unsigned long		poll_success;
 };
@@ -158,6 +155,7 @@
 	BLK_MQ_F_TAG_SHARED	= 1 << 1,
 	BLK_MQ_F_SG_MERGE	= 1 << 2,
 	BLK_MQ_F_DEFER_ISSUE	= 1 << 4,
+	BLK_MQ_F_BLOCKING	= 1 << 5,
 	BLK_MQ_F_ALLOC_POLICY_START_BIT = 8,
 	BLK_MQ_F_ALLOC_POLICY_BITS = 1,
 
@@ -178,8 +176,8 @@
 struct request_queue *blk_mq_init_queue(struct blk_mq_tag_set *);
 struct request_queue *blk_mq_init_allocated_queue(struct blk_mq_tag_set *set,
 						  struct request_queue *q);
-int blk_mq_register_disk(struct gendisk *);
-void blk_mq_unregister_disk(struct gendisk *);
+int blk_mq_register_dev(struct device *, struct request_queue *);
+void blk_mq_unregister_dev(struct device *, struct request_queue *);
 
 int blk_mq_alloc_tag_set(struct blk_mq_tag_set *set);
 void blk_mq_free_tag_set(struct blk_mq_tag_set *set);
@@ -221,7 +219,6 @@
 }
 
 struct blk_mq_hw_ctx *blk_mq_map_queue(struct request_queue *, const int ctx_index);
-struct blk_mq_hw_ctx *blk_mq_alloc_single_hw_queue(struct blk_mq_tag_set *, unsigned int, int);
 
 int blk_mq_request_started(struct request *rq);
 void blk_mq_start_request(struct request *rq);
@@ -232,6 +229,7 @@
 void blk_mq_add_to_requeue_list(struct request *rq, bool at_head);
 void blk_mq_cancel_requeue_work(struct request_queue *q);
 void blk_mq_kick_requeue_list(struct request_queue *q);
+void blk_mq_delay_kick_requeue_list(struct request_queue *q, unsigned long msecs);
 void blk_mq_abort_requeue_list(struct request_queue *q);
 void blk_mq_complete_request(struct request *rq, int error);
 
diff --git a/include/linux/blk_types.h b/include/linux/blk_types.h
index 436f43f..cd395ec 100644
--- a/include/linux/blk_types.h
+++ b/include/linux/blk_types.h
@@ -16,7 +16,6 @@
 struct io_context;
 struct cgroup_subsys_state;
 typedef void (bio_end_io_t) (struct bio *);
-typedef void (bio_destructor_t) (struct bio *);
 
 #ifdef CONFIG_BLOCK
 /*
@@ -89,14 +88,22 @@
 	struct bio_vec		bi_inline_vecs[0];
 };
 
-#define BIO_OP_SHIFT	(8 * sizeof(unsigned int) - REQ_OP_BITS)
+#define BIO_OP_SHIFT	(8 * FIELD_SIZEOF(struct bio, bi_opf) - REQ_OP_BITS)
+#define bio_flags(bio)	((bio)->bi_opf & ((1 << BIO_OP_SHIFT) - 1))
 #define bio_op(bio)	((bio)->bi_opf >> BIO_OP_SHIFT)
 
-#define bio_set_op_attrs(bio, op, op_flags) do {		\
-	WARN_ON(op >= (1 << REQ_OP_BITS));			\
-	(bio)->bi_opf &= ((1 << BIO_OP_SHIFT) - 1);		\
-	(bio)->bi_opf |= ((unsigned int) (op) << BIO_OP_SHIFT);	\
-	(bio)->bi_opf |= op_flags;				\
+#define bio_set_op_attrs(bio, op, op_flags) do {			\
+	if (__builtin_constant_p(op))					\
+		BUILD_BUG_ON((op) + 0U >= (1U << REQ_OP_BITS));		\
+	else								\
+		WARN_ON_ONCE((op) + 0U >= (1U << REQ_OP_BITS));		\
+	if (__builtin_constant_p(op_flags))				\
+		BUILD_BUG_ON((op_flags) + 0U >= (1U << BIO_OP_SHIFT));	\
+	else								\
+		WARN_ON_ONCE((op_flags) + 0U >= (1U << BIO_OP_SHIFT));	\
+	(bio)->bi_opf = bio_flags(bio);					\
+	(bio)->bi_opf |= (((op) + 0U) << BIO_OP_SHIFT);			\
+	(bio)->bi_opf |= (op_flags);					\
 } while (0)
 
 #define BIO_RESET_BYTES		offsetof(struct bio, bi_max_vecs)
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index e79055c..c47c358 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -449,7 +449,7 @@
 
 	struct list_head	requeue_list;
 	spinlock_t		requeue_lock;
-	struct work_struct	requeue_work;
+	struct delayed_work	requeue_work;
 
 	struct mutex		sysfs_lock;
 
@@ -1440,8 +1440,8 @@
 	return bio_will_gap(req->q, bio, req->bio);
 }
 
-struct work_struct;
 int kblockd_schedule_work(struct work_struct *work);
+int kblockd_schedule_work_on(int cpu, struct work_struct *work);
 int kblockd_schedule_delayed_work(struct delayed_work *dwork, unsigned long delay);
 int kblockd_schedule_delayed_work_on(int cpu, struct delayed_work *dwork, unsigned long delay);
 
diff --git a/include/linux/blockgroup_lock.h b/include/linux/blockgroup_lock.h
index e44b88b..225bdb7 100644
--- a/include/linux/blockgroup_lock.h
+++ b/include/linux/blockgroup_lock.h
@@ -10,28 +10,10 @@
 #include <linux/cache.h>
 
 #ifdef CONFIG_SMP
-
-/*
- * We want a power-of-two.  Is there a better way than this?
- */
-
-#if NR_CPUS >= 32
-#define NR_BG_LOCKS	128
-#elif NR_CPUS >= 16
-#define NR_BG_LOCKS	64
-#elif NR_CPUS >= 8
-#define NR_BG_LOCKS	32
-#elif NR_CPUS >= 4
-#define NR_BG_LOCKS	16
-#elif NR_CPUS >= 2
-#define NR_BG_LOCKS	8
+#define NR_BG_LOCKS	(4 << ilog2(NR_CPUS < 32 ? NR_CPUS : 32))
 #else
-#define NR_BG_LOCKS	4
-#endif
-
-#else	/* CONFIG_SMP */
 #define NR_BG_LOCKS	1
-#endif	/* CONFIG_SMP */
+#endif
 
 struct bgl_lock {
 	spinlock_t lock;
@@ -49,14 +31,10 @@
 		spin_lock_init(&bgl->locks[i].lock);
 }
 
-/*
- * The accessor is a macro so we can embed a blockgroup_lock into different
- * superblock types
- */
 static inline spinlock_t *
 bgl_lock_ptr(struct blockgroup_lock *bgl, unsigned int block_group)
 {
-	return &bgl->locks[(block_group) & (NR_BG_LOCKS-1)].lock;
+	return &bgl->locks[block_group & (NR_BG_LOCKS-1)].lock;
 }
 
 #endif
diff --git a/include/linux/firmware/meson/meson_sm.h b/include/linux/firmware/meson/meson_sm.h
new file mode 100644
index 0000000..8e953c6
--- /dev/null
+++ b/include/linux/firmware/meson/meson_sm.h
@@ -0,0 +1,31 @@
+/*
+ * Copyright (C) 2016 Endless Mobile, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _MESON_SM_FW_H_
+#define _MESON_SM_FW_H_
+
+enum {
+	SM_EFUSE_READ,
+	SM_EFUSE_WRITE,
+	SM_EFUSE_USER_MAX,
+};
+
+struct meson_sm_firmware;
+
+int meson_sm_call(unsigned int cmd_index, u32 *ret, u32 arg0, u32 arg1,
+		  u32 arg2, u32 arg3, u32 arg4);
+int meson_sm_call_write(void *buffer, unsigned int b_size, unsigned int cmd_index,
+			u32 arg0, u32 arg1, u32 arg2, u32 arg3, u32 arg4);
+int meson_sm_call_read(void *buffer, unsigned int cmd_index, u32 arg0, u32 arg1,
+		       u32 arg2, u32 arg3, u32 arg4);
+
+#endif /* _MESON_SM_FW_H_ */
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 901e25d..b04883e 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -2794,8 +2794,6 @@
 /* fs/splice.c */
 extern ssize_t generic_file_splice_read(struct file *, loff_t *,
 		struct pipe_inode_info *, size_t, unsigned int);
-extern ssize_t default_file_splice_read(struct file *, loff_t *,
-		struct pipe_inode_info *, size_t, unsigned int);
 extern ssize_t iter_file_splice_write(struct pipe_inode_info *,
 		struct file *, loff_t *, size_t, unsigned int);
 extern ssize_t generic_splice_sendpage(struct pipe_inode_info *pipe,
diff --git a/include/linux/fscrypto.h b/include/linux/fscrypto.h
index 76cff18..ff8b11b 100644
--- a/include/linux/fscrypto.h
+++ b/include/linux/fscrypto.h
@@ -111,23 +111,6 @@
 	struct fscrypt_completion_result ecr = { \
 		COMPLETION_INITIALIZER((ecr).completion), 0 }
 
-static inline int fscrypt_key_size(int mode)
-{
-	switch (mode) {
-	case FS_ENCRYPTION_MODE_AES_256_XTS:
-		return FS_AES_256_XTS_KEY_SIZE;
-	case FS_ENCRYPTION_MODE_AES_256_GCM:
-		return FS_AES_256_GCM_KEY_SIZE;
-	case FS_ENCRYPTION_MODE_AES_256_CBC:
-		return FS_AES_256_CBC_KEY_SIZE;
-	case FS_ENCRYPTION_MODE_AES_256_CTS:
-		return FS_AES_256_CTS_KEY_SIZE;
-	default:
-		BUG();
-	}
-	return 0;
-}
-
 #define FS_FNAME_NUM_SCATTER_ENTRIES	4
 #define FS_CRYPTO_BLOCK_SIZE		16
 #define FS_FNAME_CRYPTO_DIGEST_SIZE	32
@@ -202,13 +185,6 @@
 	return (mode == FS_ENCRYPTION_MODE_AES_256_CTS);
 }
 
-static inline u32 fscrypt_validate_encryption_key_size(u32 mode, u32 size)
-{
-	if (size == fscrypt_key_size(mode))
-		return size;
-	return 0;
-}
-
 static inline bool fscrypt_is_dot_dotdot(const struct qstr *str)
 {
 	if (str->len == 1 && str->name[0] == '.')
diff --git a/include/linux/init.h b/include/linux/init.h
index 6935d02..5a3321a 100644
--- a/include/linux/init.h
+++ b/include/linux/init.h
@@ -41,22 +41,11 @@
    discard it in modules) */
 #define __init		__section(.init.text) __cold notrace
 #define __initdata	__section(.init.data)
-#define __initconst	__constsection(.init.rodata)
+#define __initconst	__section(.init.rodata)
 #define __exitdata	__section(.exit.data)
 #define __exit_call	__used __section(.exitcall.exit)
 
 /*
- * Some architecture have tool chains which do not handle rodata attributes
- * correctly. For those disable special sections for const, so that other
- * architectures can annotate correctly.
- */
-#ifdef CONFIG_BROKEN_RODATA
-#define __constsection(x)
-#else
-#define __constsection(x) __section(x)
-#endif
-
-/*
  * modpost check for section mismatches during the kernel build.
  * A section mismatch happens when there are references from a
  * code or data section to an init section (both code or data).
@@ -75,7 +64,7 @@
  */
 #define __ref            __section(.ref.text) noinline
 #define __refdata        __section(.ref.data)
-#define __refconst       __constsection(.ref.rodata)
+#define __refconst       __section(.ref.rodata)
 
 #ifdef MODULE
 #define __exitused
@@ -88,10 +77,10 @@
 /* Used for MEMORY_HOTPLUG */
 #define __meminit        __section(.meminit.text) __cold notrace
 #define __meminitdata    __section(.meminit.data)
-#define __meminitconst   __constsection(.meminit.rodata)
+#define __meminitconst   __section(.meminit.rodata)
 #define __memexit        __section(.memexit.text) __exitused __cold notrace
 #define __memexitdata    __section(.memexit.data)
-#define __memexitconst   __constsection(.memexit.rodata)
+#define __memexitconst   __section(.memexit.rodata)
 
 /* For assembly routines */
 #define __HEAD		.section	".head.text","ax"
diff --git a/include/linux/ioprio.h b/include/linux/ioprio.h
index beb9ce1..8c12390 100644
--- a/include/linux/ioprio.h
+++ b/include/linux/ioprio.h
@@ -7,7 +7,6 @@
 /*
  * Gives us 8 prio classes with 13-bits of data for each class
  */
-#define IOPRIO_BITS		(16)
 #define IOPRIO_CLASS_SHIFT	(13)
 #define IOPRIO_PRIO_MASK	((1UL << IOPRIO_CLASS_SHIFT) - 1)
 
diff --git a/include/linux/lightnvm.h b/include/linux/lightnvm.h
index ba78b83..d190786 100644
--- a/include/linux/lightnvm.h
+++ b/include/linux/lightnvm.h
@@ -352,7 +352,10 @@
 
 	/* Backend device */
 	struct request_queue *q;
+	struct device dev;
+	struct device *parent_dev;
 	char name[DISK_NAME_LEN];
+	void *private_data;
 
 	struct mutex mlock;
 	spinlock_t lock;
@@ -524,9 +527,9 @@
 								unsigned long);
 extern void nvm_put_blk(struct nvm_dev *, struct nvm_block *);
 
-extern int nvm_register(struct request_queue *, char *,
-						struct nvm_dev_ops *);
-extern void nvm_unregister(char *);
+extern struct nvm_dev *nvm_alloc_dev(int);
+extern int nvm_register(struct nvm_dev *);
+extern void nvm_unregister(struct nvm_dev *);
 
 void nvm_mark_blk(struct nvm_dev *dev, struct ppa_addr ppa, int type);
 
@@ -575,11 +578,14 @@
 #else /* CONFIG_NVM */
 struct nvm_dev_ops;
 
-static inline int nvm_register(struct request_queue *q, char *disk_name,
-							struct nvm_dev_ops *ops)
+static inline struct nvm_dev *nvm_alloc_dev(int node)
+{
+	return ERR_PTR(-EINVAL);
+}
+static inline int nvm_register(struct nvm_dev *dev)
 {
 	return -EINVAL;
 }
-static inline void nvm_unregister(char *disk_name) {}
+static inline void nvm_unregister(struct nvm_dev *dev) {}
 #endif /* CONFIG_NVM */
 #endif /* LIGHTNVM.H */
diff --git a/include/linux/omap-gpmc.h b/include/linux/omap-gpmc.h
index 9e9d79e..35d0fd7 100644
--- a/include/linux/omap-gpmc.h
+++ b/include/linux/omap-gpmc.h
@@ -29,8 +29,8 @@
 struct gpmc_nand_ops *gpmc_omap_get_nand_ops(struct gpmc_nand_regs *regs,
 					     int cs);
 #else
-static inline gpmc_nand_ops *gpmc_omap_get_nand_ops(struct gpmc_nand_regs *regs,
-						    int cs)
+static inline struct gpmc_nand_ops *gpmc_omap_get_nand_ops(struct gpmc_nand_regs *regs,
+							   int cs)
 {
 	return NULL;
 }
diff --git a/include/linux/pipe_fs_i.h b/include/linux/pipe_fs_i.h
index 24f5470..e7497c9 100644
--- a/include/linux/pipe_fs_i.h
+++ b/include/linux/pipe_fs_i.h
@@ -66,15 +66,10 @@
  *
  * ->confirm()
  *	->steal()
- *	...
- *	->map()
- *	...
- *	->unmap()
  *
- * That is, ->map() must be called on a confirmed buffer,
- * same goes for ->steal(). See below for the meaning of each
- * operation. Also see kerneldoc in fs/pipe.c for the pipe
- * and generic variants of these hooks.
+ * That is, ->steal() must be called on a confirmed buffer.
+ * See below for the meaning of each operation. Also see kerneldoc
+ * in fs/pipe.c for the pipe and generic variants of these hooks.
  */
 struct pipe_buf_operations {
 	/*
@@ -115,6 +110,53 @@
 	void (*get)(struct pipe_inode_info *, struct pipe_buffer *);
 };
 
+/**
+ * pipe_buf_get - get a reference to a pipe_buffer
+ * @pipe:	the pipe that the buffer belongs to
+ * @buf:	the buffer to get a reference to
+ */
+static inline void pipe_buf_get(struct pipe_inode_info *pipe,
+				struct pipe_buffer *buf)
+{
+	buf->ops->get(pipe, buf);
+}
+
+/**
+ * pipe_buf_release - put a reference to a pipe_buffer
+ * @pipe:	the pipe that the buffer belongs to
+ * @buf:	the buffer to put a reference to
+ */
+static inline void pipe_buf_release(struct pipe_inode_info *pipe,
+				    struct pipe_buffer *buf)
+{
+	const struct pipe_buf_operations *ops = buf->ops;
+
+	buf->ops = NULL;
+	ops->release(pipe, buf);
+}
+
+/**
+ * pipe_buf_confirm - verify contents of the pipe buffer
+ * @pipe:	the pipe that the buffer belongs to
+ * @buf:	the buffer to confirm
+ */
+static inline int pipe_buf_confirm(struct pipe_inode_info *pipe,
+				   struct pipe_buffer *buf)
+{
+	return buf->ops->confirm(pipe, buf);
+}
+
+/**
+ * pipe_buf_steal - attempt to take ownership of a pipe_buffer
+ * @pipe:	the pipe that the buffer belongs to
+ * @buf:	the buffer to attempt to steal
+ */
+static inline int pipe_buf_steal(struct pipe_inode_info *pipe,
+				 struct pipe_buffer *buf)
+{
+	return buf->ops->steal(pipe, buf);
+}
+
 /* Differs from PIPE_BUF in that PIPE_SIZE is the length of the actual
    memory allocation, whereas PIPE_BUF makes atomicity guarantees.  */
 #define PIPE_SIZE		PAGE_SIZE
@@ -129,7 +171,6 @@
 extern unsigned long pipe_user_pages_soft;
 int pipe_proc_fn(struct ctl_table *, int, void __user *, size_t *, loff_t *);
 
-
 /* Drop the inode semaphore and wait for a pipe event, atomically */
 void pipe_wait(struct pipe_inode_info *pipe);
 
diff --git a/include/linux/sbitmap.h b/include/linux/sbitmap.h
new file mode 100644
index 0000000..f017fd6
--- /dev/null
+++ b/include/linux/sbitmap.h
@@ -0,0 +1,373 @@
+/*
+ * Fast and scalable bitmaps.
+ *
+ * Copyright (C) 2016 Facebook
+ * Copyright (C) 2013-2014 Jens Axboe
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public
+ * License v2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ */
+
+#ifndef __LINUX_SCALE_BITMAP_H
+#define __LINUX_SCALE_BITMAP_H
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+
+/**
+ * struct sbitmap_word - Word in a &struct sbitmap.
+ */
+struct sbitmap_word {
+	/**
+	 * @word: The bitmap word itself.
+	 */
+	unsigned long word;
+
+	/**
+	 * @depth: Number of bits being used in @word.
+	 */
+	unsigned long depth;
+} ____cacheline_aligned_in_smp;
+
+/**
+ * struct sbitmap - Scalable bitmap.
+ *
+ * A &struct sbitmap is spread over multiple cachelines to avoid ping-pong. This
+ * trades off higher memory usage for better scalability.
+ */
+struct sbitmap {
+	/**
+	 * @depth: Number of bits used in the whole bitmap.
+	 */
+	unsigned int depth;
+
+	/**
+	 * @shift: log2(number of bits used per word)
+	 */
+	unsigned int shift;
+
+	/**
+	 * @map_nr: Number of words (cachelines) being used for the bitmap.
+	 */
+	unsigned int map_nr;
+
+	/**
+	 * @map: Allocated bitmap.
+	 */
+	struct sbitmap_word *map;
+};
+
+#define SBQ_WAIT_QUEUES 8
+#define SBQ_WAKE_BATCH 8
+
+/**
+ * struct sbq_wait_state - Wait queue in a &struct sbitmap_queue.
+ */
+struct sbq_wait_state {
+	/**
+	 * @wait_cnt: Number of frees remaining before we wake up.
+	 */
+	atomic_t wait_cnt;
+
+	/**
+	 * @wait: Wait queue.
+	 */
+	wait_queue_head_t wait;
+} ____cacheline_aligned_in_smp;
+
+/**
+ * struct sbitmap_queue - Scalable bitmap with the added ability to wait on free
+ * bits.
+ *
+ * A &struct sbitmap_queue uses multiple wait queues and rolling wakeups to
+ * avoid contention on the wait queue spinlock. This ensures that we don't hit a
+ * scalability wall when we run out of free bits and have to start putting tasks
+ * to sleep.
+ */
+struct sbitmap_queue {
+	/**
+	 * @sb: Scalable bitmap.
+	 */
+	struct sbitmap sb;
+
+	/*
+	 * @alloc_hint: Cache of last successfully allocated or freed bit.
+	 *
+	 * This is per-cpu, which allows multiple users to stick to different
+	 * cachelines until the map is exhausted.
+	 */
+	unsigned int __percpu *alloc_hint;
+
+	/**
+	 * @wake_batch: Number of bits which must be freed before we wake up any
+	 * waiters.
+	 */
+	unsigned int wake_batch;
+
+	/**
+	 * @wake_index: Next wait queue in @ws to wake up.
+	 */
+	atomic_t wake_index;
+
+	/**
+	 * @ws: Wait queues.
+	 */
+	struct sbq_wait_state *ws;
+
+	/**
+	 * @round_robin: Allocate bits in strict round-robin order.
+	 */
+	bool round_robin;
+};
+
+/**
+ * sbitmap_init_node() - Initialize a &struct sbitmap on a specific memory node.
+ * @sb: Bitmap to initialize.
+ * @depth: Number of bits to allocate.
+ * @shift: Use 2^@shift bits per word in the bitmap; if a negative number if
+ *         given, a good default is chosen.
+ * @flags: Allocation flags.
+ * @node: Memory node to allocate on.
+ *
+ * Return: Zero on success or negative errno on failure.
+ */
+int sbitmap_init_node(struct sbitmap *sb, unsigned int depth, int shift,
+		      gfp_t flags, int node);
+
+/**
+ * sbitmap_free() - Free memory used by a &struct sbitmap.
+ * @sb: Bitmap to free.
+ */
+static inline void sbitmap_free(struct sbitmap *sb)
+{
+	kfree(sb->map);
+	sb->map = NULL;
+}
+
+/**
+ * sbitmap_resize() - Resize a &struct sbitmap.
+ * @sb: Bitmap to resize.
+ * @depth: New number of bits to resize to.
+ *
+ * Doesn't reallocate anything. It's up to the caller to ensure that the new
+ * depth doesn't exceed the depth that the sb was initialized with.
+ */
+void sbitmap_resize(struct sbitmap *sb, unsigned int depth);
+
+/**
+ * sbitmap_get() - Try to allocate a free bit from a &struct sbitmap.
+ * @sb: Bitmap to allocate from.
+ * @alloc_hint: Hint for where to start searching for a free bit.
+ * @round_robin: If true, be stricter about allocation order; always allocate
+ *               starting from the last allocated bit. This is less efficient
+ *               than the default behavior (false).
+ *
+ * Return: Non-negative allocated bit number if successful, -1 otherwise.
+ */
+int sbitmap_get(struct sbitmap *sb, unsigned int alloc_hint, bool round_robin);
+
+/**
+ * sbitmap_any_bit_set() - Check for a set bit in a &struct sbitmap.
+ * @sb: Bitmap to check.
+ *
+ * Return: true if any bit in the bitmap is set, false otherwise.
+ */
+bool sbitmap_any_bit_set(const struct sbitmap *sb);
+
+/**
+ * sbitmap_any_bit_clear() - Check for an unset bit in a &struct
+ * sbitmap.
+ * @sb: Bitmap to check.
+ *
+ * Return: true if any bit in the bitmap is clear, false otherwise.
+ */
+bool sbitmap_any_bit_clear(const struct sbitmap *sb);
+
+typedef bool (*sb_for_each_fn)(struct sbitmap *, unsigned int, void *);
+
+/**
+ * sbitmap_for_each_set() - Iterate over each set bit in a &struct sbitmap.
+ * @sb: Bitmap to iterate over.
+ * @fn: Callback. Should return true to continue or false to break early.
+ * @data: Pointer to pass to callback.
+ *
+ * This is inline even though it's non-trivial so that the function calls to the
+ * callback will hopefully get optimized away.
+ */
+static inline void sbitmap_for_each_set(struct sbitmap *sb, sb_for_each_fn fn,
+					void *data)
+{
+	unsigned int i;
+
+	for (i = 0; i < sb->map_nr; i++) {
+		struct sbitmap_word *word = &sb->map[i];
+		unsigned int off, nr;
+
+		if (!word->word)
+			continue;
+
+		nr = 0;
+		off = i << sb->shift;
+		while (1) {
+			nr = find_next_bit(&word->word, word->depth, nr);
+			if (nr >= word->depth)
+				break;
+
+			if (!fn(sb, off + nr, data))
+				return;
+
+			nr++;
+		}
+	}
+}
+
+#define SB_NR_TO_INDEX(sb, bitnr) ((bitnr) >> (sb)->shift)
+#define SB_NR_TO_BIT(sb, bitnr) ((bitnr) & ((1U << (sb)->shift) - 1U))
+
+static inline unsigned long *__sbitmap_word(struct sbitmap *sb,
+					    unsigned int bitnr)
+{
+	return &sb->map[SB_NR_TO_INDEX(sb, bitnr)].word;
+}
+
+/* Helpers equivalent to the operations in asm/bitops.h and linux/bitmap.h */
+
+static inline void sbitmap_set_bit(struct sbitmap *sb, unsigned int bitnr)
+{
+	set_bit(SB_NR_TO_BIT(sb, bitnr), __sbitmap_word(sb, bitnr));
+}
+
+static inline void sbitmap_clear_bit(struct sbitmap *sb, unsigned int bitnr)
+{
+	clear_bit(SB_NR_TO_BIT(sb, bitnr), __sbitmap_word(sb, bitnr));
+}
+
+static inline int sbitmap_test_bit(struct sbitmap *sb, unsigned int bitnr)
+{
+	return test_bit(SB_NR_TO_BIT(sb, bitnr), __sbitmap_word(sb, bitnr));
+}
+
+unsigned int sbitmap_weight(const struct sbitmap *sb);
+
+/**
+ * sbitmap_queue_init_node() - Initialize a &struct sbitmap_queue on a specific
+ * memory node.
+ * @sbq: Bitmap queue to initialize.
+ * @depth: See sbitmap_init_node().
+ * @shift: See sbitmap_init_node().
+ * @round_robin: See sbitmap_get().
+ * @flags: Allocation flags.
+ * @node: Memory node to allocate on.
+ *
+ * Return: Zero on success or negative errno on failure.
+ */
+int sbitmap_queue_init_node(struct sbitmap_queue *sbq, unsigned int depth,
+			    int shift, bool round_robin, gfp_t flags, int node);
+
+/**
+ * sbitmap_queue_free() - Free memory used by a &struct sbitmap_queue.
+ *
+ * @sbq: Bitmap queue to free.
+ */
+static inline void sbitmap_queue_free(struct sbitmap_queue *sbq)
+{
+	kfree(sbq->ws);
+	free_percpu(sbq->alloc_hint);
+	sbitmap_free(&sbq->sb);
+}
+
+/**
+ * sbitmap_queue_resize() - Resize a &struct sbitmap_queue.
+ * @sbq: Bitmap queue to resize.
+ * @depth: New number of bits to resize to.
+ *
+ * Like sbitmap_resize(), this doesn't reallocate anything. It has to do
+ * some extra work on the &struct sbitmap_queue, so it's not safe to just
+ * resize the underlying &struct sbitmap.
+ */
+void sbitmap_queue_resize(struct sbitmap_queue *sbq, unsigned int depth);
+
+/**
+ * __sbitmap_queue_get() - Try to allocate a free bit from a &struct
+ * sbitmap_queue with preemption already disabled.
+ * @sbq: Bitmap queue to allocate from.
+ *
+ * Return: Non-negative allocated bit number if successful, -1 otherwise.
+ */
+int __sbitmap_queue_get(struct sbitmap_queue *sbq);
+
+/**
+ * sbitmap_queue_get() - Try to allocate a free bit from a &struct
+ * sbitmap_queue.
+ * @sbq: Bitmap queue to allocate from.
+ * @cpu: Output parameter; will contain the CPU we ran on (e.g., to be passed to
+ *       sbitmap_queue_clear()).
+ *
+ * Return: Non-negative allocated bit number if successful, -1 otherwise.
+ */
+static inline int sbitmap_queue_get(struct sbitmap_queue *sbq,
+				    unsigned int *cpu)
+{
+	int nr;
+
+	*cpu = get_cpu();
+	nr = __sbitmap_queue_get(sbq);
+	put_cpu();
+	return nr;
+}
+
+/**
+ * sbitmap_queue_clear() - Free an allocated bit and wake up waiters on a
+ * &struct sbitmap_queue.
+ * @sbq: Bitmap to free from.
+ * @nr: Bit number to free.
+ * @cpu: CPU the bit was allocated on.
+ */
+void sbitmap_queue_clear(struct sbitmap_queue *sbq, unsigned int nr,
+			 unsigned int cpu);
+
+static inline int sbq_index_inc(int index)
+{
+	return (index + 1) & (SBQ_WAIT_QUEUES - 1);
+}
+
+static inline void sbq_index_atomic_inc(atomic_t *index)
+{
+	int old = atomic_read(index);
+	int new = sbq_index_inc(old);
+	atomic_cmpxchg(index, old, new);
+}
+
+/**
+ * sbq_wait_ptr() - Get the next wait queue to use for a &struct
+ * sbitmap_queue.
+ * @sbq: Bitmap queue to wait on.
+ * @wait_index: A counter per "user" of @sbq.
+ */
+static inline struct sbq_wait_state *sbq_wait_ptr(struct sbitmap_queue *sbq,
+						  atomic_t *wait_index)
+{
+	struct sbq_wait_state *ws;
+
+	ws = &sbq->ws[atomic_read(wait_index)];
+	sbq_index_atomic_inc(wait_index);
+	return ws;
+}
+
+/**
+ * sbitmap_queue_wake_all() - Wake up everything waiting on a &struct
+ * sbitmap_queue.
+ * @sbq: Bitmap queue to wake up.
+ */
+void sbitmap_queue_wake_all(struct sbitmap_queue *sbq);
+
+#endif /* __LINUX_SCALE_BITMAP_H */
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index 9bf60b5..601258f 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -3064,15 +3064,9 @@
 int skb_store_bits(struct sk_buff *skb, int offset, const void *from, int len);
 __wsum skb_copy_and_csum_bits(const struct sk_buff *skb, int offset, u8 *to,
 			      int len, __wsum csum);
-ssize_t skb_socket_splice(struct sock *sk,
-			  struct pipe_inode_info *pipe,
-			  struct splice_pipe_desc *spd);
 int skb_splice_bits(struct sk_buff *skb, struct sock *sk, unsigned int offset,
 		    struct pipe_inode_info *pipe, unsigned int len,
-		    unsigned int flags,
-		    ssize_t (*splice_cb)(struct sock *,
-					 struct pipe_inode_info *,
-					 struct splice_pipe_desc *));
+		    unsigned int flags);
 void skb_copy_and_csum_dev(const struct sk_buff *skb, u8 *to);
 unsigned int skb_zerocopy_headlen(const struct sk_buff *from);
 int skb_zerocopy(struct sk_buff *to, struct sk_buff *from,
diff --git a/include/linux/soc/qcom/smd.h b/include/linux/soc/qcom/smd.h
index cbb0f06..f148e0f 100644
--- a/include/linux/soc/qcom/smd.h
+++ b/include/linux/soc/qcom/smd.h
@@ -55,11 +55,16 @@
 struct qcom_smd_channel *qcom_smd_open_channel(struct qcom_smd_channel *channel,
 					       const char *name,
 					       qcom_smd_cb_t cb);
+void qcom_smd_close_channel(struct qcom_smd_channel *channel);
 void *qcom_smd_get_drvdata(struct qcom_smd_channel *channel);
 void qcom_smd_set_drvdata(struct qcom_smd_channel *channel, void *data);
 int qcom_smd_send(struct qcom_smd_channel *channel, const void *data, int len);
 
 
+struct qcom_smd_edge *qcom_smd_register_edge(struct device *parent,
+					     struct device_node *node);
+int qcom_smd_unregister_edge(struct qcom_smd_edge *edge);
+
 #else
 
 static inline int qcom_smd_driver_register(struct qcom_smd_driver *drv)
@@ -83,14 +88,20 @@
 	return NULL;
 }
 
-void *qcom_smd_get_drvdata(struct qcom_smd_channel *channel)
+static inline void qcom_smd_close_channel(struct qcom_smd_channel *channel)
+{
+	/* This shouldn't be possible */
+	WARN_ON(1);
+}
+
+static inline void *qcom_smd_get_drvdata(struct qcom_smd_channel *channel)
 {
 	/* This shouldn't be possible */
 	WARN_ON(1);
 	return NULL;
 }
 
-void qcom_smd_set_drvdata(struct qcom_smd_channel *channel, void *data)
+static inline void qcom_smd_set_drvdata(struct qcom_smd_channel *channel, void *data)
 {
 	/* This shouldn't be possible */
 	WARN_ON(1);
@@ -104,6 +115,20 @@
 	return -ENXIO;
 }
 
+static inline struct qcom_smd_edge *
+qcom_smd_register_edge(struct device *parent,
+		       struct device_node *node)
+{
+	return ERR_PTR(-ENXIO);
+}
+
+static inline int qcom_smd_unregister_edge(struct qcom_smd_edge *edge)
+{
+	/* This shouldn't be possible */
+	WARN_ON(1);
+	return -ENXIO;
+}
+
 #endif
 
 #define module_qcom_smd_driver(__smd_driver) \
diff --git a/include/linux/splice.h b/include/linux/splice.h
index da2751d..00a2116 100644
--- a/include/linux/splice.h
+++ b/include/linux/splice.h
@@ -72,6 +72,8 @@
 				  struct splice_desc *, splice_actor *);
 extern ssize_t splice_to_pipe(struct pipe_inode_info *,
 			      struct splice_pipe_desc *);
+extern ssize_t add_to_pipe(struct pipe_inode_info *,
+			      struct pipe_buffer *);
 extern ssize_t splice_direct_to_actor(struct file *, struct splice_desc *,
 				      splice_direct_actor *);
 
@@ -83,4 +85,5 @@
 extern void spd_release_page(struct splice_pipe_desc *, unsigned int);
 
 extern const struct pipe_buf_operations page_cache_pipe_buf_ops;
+extern const struct pipe_buf_operations default_pipe_buf_ops;
 #endif
diff --git a/include/linux/uio.h b/include/linux/uio.h
index 75b4aaf..b5ebe6d 100644
--- a/include/linux/uio.h
+++ b/include/linux/uio.h
@@ -13,6 +13,7 @@
 #include <uapi/linux/uio.h>
 
 struct page;
+struct pipe_inode_info;
 
 struct kvec {
 	void *iov_base; /* and that should *never* hold a userland pointer */
@@ -23,6 +24,7 @@
 	ITER_IOVEC = 0,
 	ITER_KVEC = 2,
 	ITER_BVEC = 4,
+	ITER_PIPE = 8,
 };
 
 struct iov_iter {
@@ -33,8 +35,12 @@
 		const struct iovec *iov;
 		const struct kvec *kvec;
 		const struct bio_vec *bvec;
+		struct pipe_inode_info *pipe;
 	};
-	unsigned long nr_segs;
+	union {
+		unsigned long nr_segs;
+		int idx;
+	};
 };
 
 /*
@@ -64,7 +70,7 @@
 }
 
 #define iov_for_each(iov, iter, start)				\
-	if (!((start).type & ITER_BVEC))			\
+	if (!((start).type & (ITER_BVEC | ITER_PIPE)))		\
 	for (iter = (start);					\
 	     (iter).count &&					\
 	     ((iov = iov_iter_iovec(&(iter))), 1);		\
@@ -94,6 +100,8 @@
 			unsigned long nr_segs, size_t count);
 void iov_iter_bvec(struct iov_iter *i, int direction, const struct bio_vec *bvec,
 			unsigned long nr_segs, size_t count);
+void iov_iter_pipe(struct iov_iter *i, int direction, struct pipe_inode_info *pipe,
+			size_t count);
 ssize_t iov_iter_get_pages(struct iov_iter *i, struct page **pages,
 			size_t maxsize, unsigned maxpages, size_t *start);
 ssize_t iov_iter_get_pages_alloc(struct iov_iter *i, struct page ***pages,
@@ -109,7 +117,7 @@
 
 static inline bool iter_is_iovec(struct iov_iter *i)
 {
-	return !(i->type & (ITER_BVEC | ITER_KVEC));
+	return !(i->type & (ITER_BVEC | ITER_KVEC | ITER_PIPE));
 }
 
 /*
diff --git a/include/linux/workqueue.h b/include/linux/workqueue.h
index 26cc1df..fc6e221 100644
--- a/include/linux/workqueue.h
+++ b/include/linux/workqueue.h
@@ -442,6 +442,7 @@
 int execute_in_process_context(work_func_t fn, struct execute_work *);
 
 extern bool flush_work(struct work_struct *work);
+extern bool cancel_work(struct work_struct *work);
 extern bool cancel_work_sync(struct work_struct *work);
 
 extern bool flush_delayed_work(struct delayed_work *dwork);
diff --git a/init/Kconfig b/init/Kconfig
index 3b9a47f..d7fc226 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -2118,12 +2118,6 @@
 	depends on SMP
 	bool
 
-# Can be selected by architectures with broken toolchains
-# that get confused by correct const<->read_only section
-# mappings
-config BROKEN_RODATA
-	bool
-
 config ASN1
 	tristate
 	help
diff --git a/kernel/relay.c b/kernel/relay.c
index fc9b4a4..9988f5c 100644
--- a/kernel/relay.c
+++ b/kernel/relay.c
@@ -1108,51 +1108,23 @@
 	return end_pos;
 }
 
-/*
- *	subbuf_read_actor - read up to one subbuf's worth of data
- */
-static int subbuf_read_actor(size_t read_start,
-			     struct rchan_buf *buf,
-			     size_t avail,
-			     read_descriptor_t *desc)
-{
-	void *from;
-	int ret = 0;
-
-	from = buf->start + read_start;
-	ret = avail;
-	if (copy_to_user(desc->arg.buf, from, avail)) {
-		desc->error = -EFAULT;
-		ret = 0;
-	}
-	desc->arg.data += ret;
-	desc->written += ret;
-	desc->count -= ret;
-
-	return ret;
-}
-
-typedef int (*subbuf_actor_t) (size_t read_start,
-			       struct rchan_buf *buf,
-			       size_t avail,
-			       read_descriptor_t *desc);
-
-/*
- *	relay_file_read_subbufs - read count bytes, bridging subbuf boundaries
- */
-static ssize_t relay_file_read_subbufs(struct file *filp, loff_t *ppos,
-					subbuf_actor_t subbuf_actor,
-					read_descriptor_t *desc)
+static ssize_t relay_file_read(struct file *filp,
+			       char __user *buffer,
+			       size_t count,
+			       loff_t *ppos)
 {
 	struct rchan_buf *buf = filp->private_data;
 	size_t read_start, avail;
+	size_t written = 0;
 	int ret;
 
-	if (!desc->count)
+	if (!count)
 		return 0;
 
 	inode_lock(file_inode(filp));
 	do {
+		void *from;
+
 		if (!relay_file_read_avail(buf, *ppos))
 			break;
 
@@ -1161,32 +1133,22 @@
 		if (!avail)
 			break;
 
-		avail = min(desc->count, avail);
-		ret = subbuf_actor(read_start, buf, avail, desc);
-		if (desc->error < 0)
+		avail = min(count, avail);
+		from = buf->start + read_start;
+		ret = avail;
+		if (copy_to_user(buffer, from, avail))
 			break;
 
-		if (ret) {
-			relay_file_read_consume(buf, read_start, ret);
-			*ppos = relay_file_read_end_pos(buf, read_start, ret);
-		}
-	} while (desc->count && ret);
+		buffer += ret;
+		written += ret;
+		count -= ret;
+
+		relay_file_read_consume(buf, read_start, ret);
+		*ppos = relay_file_read_end_pos(buf, read_start, ret);
+	} while (count);
 	inode_unlock(file_inode(filp));
 
-	return desc->written;
-}
-
-static ssize_t relay_file_read(struct file *filp,
-			       char __user *buffer,
-			       size_t count,
-			       loff_t *ppos)
-{
-	read_descriptor_t desc;
-	desc.written = 0;
-	desc.count = count;
-	desc.arg.buf = buffer;
-	desc.error = 0;
-	return relay_file_read_subbufs(filp, ppos, subbuf_read_actor, &desc);
+	return written;
 }
 
 static void relay_consume_bytes(struct rchan_buf *rbuf, int bytes_consumed)
diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index ef071ca..bd81f03 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -2974,6 +2974,31 @@
 }
 EXPORT_SYMBOL(flush_delayed_work);
 
+static bool __cancel_work(struct work_struct *work, bool is_dwork)
+{
+	unsigned long flags;
+	int ret;
+
+	do {
+		ret = try_to_grab_pending(work, is_dwork, &flags);
+	} while (unlikely(ret == -EAGAIN));
+
+	if (unlikely(ret < 0))
+		return false;
+
+	set_work_pool_and_clear_pending(work, get_work_pool_id(work));
+	local_irq_restore(flags);
+	return ret;
+}
+
+/*
+ * See cancel_delayed_work()
+ */
+bool cancel_work(struct work_struct *work)
+{
+	return __cancel_work(work, false);
+}
+
 /**
  * cancel_delayed_work - cancel a delayed work
  * @dwork: delayed_work to cancel
@@ -2992,20 +3017,7 @@
  */
 bool cancel_delayed_work(struct delayed_work *dwork)
 {
-	unsigned long flags;
-	int ret;
-
-	do {
-		ret = try_to_grab_pending(&dwork->work, true, &flags);
-	} while (unlikely(ret == -EAGAIN));
-
-	if (unlikely(ret < 0))
-		return false;
-
-	set_work_pool_and_clear_pending(&dwork->work,
-					get_work_pool_id(&dwork->work));
-	local_irq_restore(flags);
-	return ret;
+	return __cancel_work(&dwork->work, true);
 }
 EXPORT_SYMBOL(cancel_delayed_work);
 
diff --git a/lib/Kconfig b/lib/Kconfig
index 0e74df3..260a80e 100644
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -547,4 +547,7 @@
 	bool
 	select STACKTRACE
 
+config SBITMAP
+	bool
+
 endmenu
diff --git a/lib/Makefile b/lib/Makefile
index df747e5..f3ca8c0 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -227,3 +227,5 @@
 obj-$(CONFIG_UBSAN) += ubsan.o
 
 UBSAN_SANITIZE_ubsan.o := n
+
+obj-$(CONFIG_SBITMAP) += sbitmap.o
diff --git a/lib/iov_iter.c b/lib/iov_iter.c
index 7e3138c..48b8c27 100644
--- a/lib/iov_iter.c
+++ b/lib/iov_iter.c
@@ -3,8 +3,11 @@
 #include <linux/pagemap.h>
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
+#include <linux/splice.h>
 #include <net/checksum.h>
 
+#define PIPE_PARANOIA /* for now */
+
 #define iterate_iovec(i, n, __v, __p, skip, STEP) {	\
 	size_t left;					\
 	size_t wanted = n;				\
@@ -290,6 +293,93 @@
 	return wanted - bytes;
 }
 
+#ifdef PIPE_PARANOIA
+static bool sanity(const struct iov_iter *i)
+{
+	struct pipe_inode_info *pipe = i->pipe;
+	int idx = i->idx;
+	int next = pipe->curbuf + pipe->nrbufs;
+	if (i->iov_offset) {
+		struct pipe_buffer *p;
+		if (unlikely(!pipe->nrbufs))
+			goto Bad;	// pipe must be non-empty
+		if (unlikely(idx != ((next - 1) & (pipe->buffers - 1))))
+			goto Bad;	// must be at the last buffer...
+
+		p = &pipe->bufs[idx];
+		if (unlikely(p->offset + p->len != i->iov_offset))
+			goto Bad;	// ... at the end of segment
+	} else {
+		if (idx != (next & (pipe->buffers - 1)))
+			goto Bad;	// must be right after the last buffer
+	}
+	return true;
+Bad:
+	printk(KERN_ERR "idx = %d, offset = %zd\n", i->idx, i->iov_offset);
+	printk(KERN_ERR "curbuf = %d, nrbufs = %d, buffers = %d\n",
+			pipe->curbuf, pipe->nrbufs, pipe->buffers);
+	for (idx = 0; idx < pipe->buffers; idx++)
+		printk(KERN_ERR "[%p %p %d %d]\n",
+			pipe->bufs[idx].ops,
+			pipe->bufs[idx].page,
+			pipe->bufs[idx].offset,
+			pipe->bufs[idx].len);
+	WARN_ON(1);
+	return false;
+}
+#else
+#define sanity(i) true
+#endif
+
+static inline int next_idx(int idx, struct pipe_inode_info *pipe)
+{
+	return (idx + 1) & (pipe->buffers - 1);
+}
+
+static size_t copy_page_to_iter_pipe(struct page *page, size_t offset, size_t bytes,
+			 struct iov_iter *i)
+{
+	struct pipe_inode_info *pipe = i->pipe;
+	struct pipe_buffer *buf;
+	size_t off;
+	int idx;
+
+	if (unlikely(bytes > i->count))
+		bytes = i->count;
+
+	if (unlikely(!bytes))
+		return 0;
+
+	if (!sanity(i))
+		return 0;
+
+	off = i->iov_offset;
+	idx = i->idx;
+	buf = &pipe->bufs[idx];
+	if (off) {
+		if (offset == off && buf->page == page) {
+			/* merge with the last one */
+			buf->len += bytes;
+			i->iov_offset += bytes;
+			goto out;
+		}
+		idx = next_idx(idx, pipe);
+		buf = &pipe->bufs[idx];
+	}
+	if (idx == pipe->curbuf && pipe->nrbufs)
+		return 0;
+	pipe->nrbufs++;
+	buf->ops = &page_cache_pipe_buf_ops;
+	get_page(buf->page = page);
+	buf->offset = offset;
+	buf->len = bytes;
+	i->iov_offset = offset + bytes;
+	i->idx = idx;
+out:
+	i->count -= bytes;
+	return bytes;
+}
+
 /*
  * Fault in one or more iovecs of the given iov_iter, to a maximum length of
  * bytes.  For each iovec, fault in each page that constitutes the iovec.
@@ -356,9 +446,98 @@
 	kunmap_atomic(addr);
 }
 
+static inline bool allocated(struct pipe_buffer *buf)
+{
+	return buf->ops == &default_pipe_buf_ops;
+}
+
+static inline void data_start(const struct iov_iter *i, int *idxp, size_t *offp)
+{
+	size_t off = i->iov_offset;
+	int idx = i->idx;
+	if (off && (!allocated(&i->pipe->bufs[idx]) || off == PAGE_SIZE)) {
+		idx = next_idx(idx, i->pipe);
+		off = 0;
+	}
+	*idxp = idx;
+	*offp = off;
+}
+
+static size_t push_pipe(struct iov_iter *i, size_t size,
+			int *idxp, size_t *offp)
+{
+	struct pipe_inode_info *pipe = i->pipe;
+	size_t off;
+	int idx;
+	ssize_t left;
+
+	if (unlikely(size > i->count))
+		size = i->count;
+	if (unlikely(!size))
+		return 0;
+
+	left = size;
+	data_start(i, &idx, &off);
+	*idxp = idx;
+	*offp = off;
+	if (off) {
+		left -= PAGE_SIZE - off;
+		if (left <= 0) {
+			pipe->bufs[idx].len += size;
+			return size;
+		}
+		pipe->bufs[idx].len = PAGE_SIZE;
+		idx = next_idx(idx, pipe);
+	}
+	while (idx != pipe->curbuf || !pipe->nrbufs) {
+		struct page *page = alloc_page(GFP_USER);
+		if (!page)
+			break;
+		pipe->nrbufs++;
+		pipe->bufs[idx].ops = &default_pipe_buf_ops;
+		pipe->bufs[idx].page = page;
+		pipe->bufs[idx].offset = 0;
+		if (left <= PAGE_SIZE) {
+			pipe->bufs[idx].len = left;
+			return size;
+		}
+		pipe->bufs[idx].len = PAGE_SIZE;
+		left -= PAGE_SIZE;
+		idx = next_idx(idx, pipe);
+	}
+	return size - left;
+}
+
+static size_t copy_pipe_to_iter(const void *addr, size_t bytes,
+				struct iov_iter *i)
+{
+	struct pipe_inode_info *pipe = i->pipe;
+	size_t n, off;
+	int idx;
+
+	if (!sanity(i))
+		return 0;
+
+	bytes = n = push_pipe(i, bytes, &idx, &off);
+	if (unlikely(!n))
+		return 0;
+	for ( ; n; idx = next_idx(idx, pipe), off = 0) {
+		size_t chunk = min_t(size_t, n, PAGE_SIZE - off);
+		memcpy_to_page(pipe->bufs[idx].page, off, addr, chunk);
+		i->idx = idx;
+		i->iov_offset = off + chunk;
+		n -= chunk;
+		addr += chunk;
+	}
+	i->count -= bytes;
+	return bytes;
+}
+
 size_t copy_to_iter(const void *addr, size_t bytes, struct iov_iter *i)
 {
 	const char *from = addr;
+	if (unlikely(i->type & ITER_PIPE))
+		return copy_pipe_to_iter(addr, bytes, i);
 	iterate_and_advance(i, bytes, v,
 		__copy_to_user(v.iov_base, (from += v.iov_len) - v.iov_len,
 			       v.iov_len),
@@ -374,6 +553,10 @@
 size_t copy_from_iter(void *addr, size_t bytes, struct iov_iter *i)
 {
 	char *to = addr;
+	if (unlikely(i->type & ITER_PIPE)) {
+		WARN_ON(1);
+		return 0;
+	}
 	iterate_and_advance(i, bytes, v,
 		__copy_from_user((to += v.iov_len) - v.iov_len, v.iov_base,
 				 v.iov_len),
@@ -389,6 +572,10 @@
 size_t copy_from_iter_nocache(void *addr, size_t bytes, struct iov_iter *i)
 {
 	char *to = addr;
+	if (unlikely(i->type & ITER_PIPE)) {
+		WARN_ON(1);
+		return 0;
+	}
 	iterate_and_advance(i, bytes, v,
 		__copy_from_user_nocache((to += v.iov_len) - v.iov_len,
 					 v.iov_base, v.iov_len),
@@ -409,14 +596,20 @@
 		size_t wanted = copy_to_iter(kaddr + offset, bytes, i);
 		kunmap_atomic(kaddr);
 		return wanted;
-	} else
+	} else if (likely(!(i->type & ITER_PIPE)))
 		return copy_page_to_iter_iovec(page, offset, bytes, i);
+	else
+		return copy_page_to_iter_pipe(page, offset, bytes, i);
 }
 EXPORT_SYMBOL(copy_page_to_iter);
 
 size_t copy_page_from_iter(struct page *page, size_t offset, size_t bytes,
 			 struct iov_iter *i)
 {
+	if (unlikely(i->type & ITER_PIPE)) {
+		WARN_ON(1);
+		return 0;
+	}
 	if (i->type & (ITER_BVEC|ITER_KVEC)) {
 		void *kaddr = kmap_atomic(page);
 		size_t wanted = copy_from_iter(kaddr + offset, bytes, i);
@@ -427,8 +620,34 @@
 }
 EXPORT_SYMBOL(copy_page_from_iter);
 
+static size_t pipe_zero(size_t bytes, struct iov_iter *i)
+{
+	struct pipe_inode_info *pipe = i->pipe;
+	size_t n, off;
+	int idx;
+
+	if (!sanity(i))
+		return 0;
+
+	bytes = n = push_pipe(i, bytes, &idx, &off);
+	if (unlikely(!n))
+		return 0;
+
+	for ( ; n; idx = next_idx(idx, pipe), off = 0) {
+		size_t chunk = min_t(size_t, n, PAGE_SIZE - off);
+		memzero_page(pipe->bufs[idx].page, off, chunk);
+		i->idx = idx;
+		i->iov_offset = off + chunk;
+		n -= chunk;
+	}
+	i->count -= bytes;
+	return bytes;
+}
+
 size_t iov_iter_zero(size_t bytes, struct iov_iter *i)
 {
+	if (unlikely(i->type & ITER_PIPE))
+		return pipe_zero(bytes, i);
 	iterate_and_advance(i, bytes, v,
 		__clear_user(v.iov_base, v.iov_len),
 		memzero_page(v.bv_page, v.bv_offset, v.bv_len),
@@ -443,6 +662,11 @@
 		struct iov_iter *i, unsigned long offset, size_t bytes)
 {
 	char *kaddr = kmap_atomic(page), *p = kaddr + offset;
+	if (unlikely(i->type & ITER_PIPE)) {
+		kunmap_atomic(kaddr);
+		WARN_ON(1);
+		return 0;
+	}
 	iterate_all_kinds(i, bytes, v,
 		__copy_from_user_inatomic((p += v.iov_len) - v.iov_len,
 					  v.iov_base, v.iov_len),
@@ -455,8 +679,49 @@
 }
 EXPORT_SYMBOL(iov_iter_copy_from_user_atomic);
 
+static void pipe_advance(struct iov_iter *i, size_t size)
+{
+	struct pipe_inode_info *pipe = i->pipe;
+	struct pipe_buffer *buf;
+	int idx = i->idx;
+	size_t off = i->iov_offset;
+	
+	if (unlikely(i->count < size))
+		size = i->count;
+
+	if (size) {
+		if (off) /* make it relative to the beginning of buffer */
+			size += off - pipe->bufs[idx].offset;
+		while (1) {
+			buf = &pipe->bufs[idx];
+			if (size <= buf->len)
+				break;
+			size -= buf->len;
+			idx = next_idx(idx, pipe);
+		}
+		buf->len = size;
+		i->idx = idx;
+		off = i->iov_offset = buf->offset + size;
+	}
+	if (off)
+		idx = next_idx(idx, pipe);
+	if (pipe->nrbufs) {
+		int unused = (pipe->curbuf + pipe->nrbufs) & (pipe->buffers - 1);
+		/* [curbuf,unused) is in use.  Free [idx,unused) */
+		while (idx != unused) {
+			pipe_buf_release(pipe, &pipe->bufs[idx]);
+			idx = next_idx(idx, pipe);
+			pipe->nrbufs--;
+		}
+	}
+}
+
 void iov_iter_advance(struct iov_iter *i, size_t size)
 {
+	if (unlikely(i->type & ITER_PIPE)) {
+		pipe_advance(i, size);
+		return;
+	}
 	iterate_and_advance(i, size, v, 0, 0, 0)
 }
 EXPORT_SYMBOL(iov_iter_advance);
@@ -466,6 +731,8 @@
  */
 size_t iov_iter_single_seg_count(const struct iov_iter *i)
 {
+	if (unlikely(i->type & ITER_PIPE))
+		return i->count;	// it is a silly place, anyway
 	if (i->nr_segs == 1)
 		return i->count;
 	else if (i->type & ITER_BVEC)
@@ -501,6 +768,19 @@
 }
 EXPORT_SYMBOL(iov_iter_bvec);
 
+void iov_iter_pipe(struct iov_iter *i, int direction,
+			struct pipe_inode_info *pipe,
+			size_t count)
+{
+	BUG_ON(direction != ITER_PIPE);
+	i->type = direction;
+	i->pipe = pipe;
+	i->idx = (pipe->curbuf + pipe->nrbufs) & (pipe->buffers - 1);
+	i->iov_offset = 0;
+	i->count = count;
+}
+EXPORT_SYMBOL(iov_iter_pipe);
+
 unsigned long iov_iter_alignment(const struct iov_iter *i)
 {
 	unsigned long res = 0;
@@ -509,6 +789,11 @@
 	if (!size)
 		return 0;
 
+	if (unlikely(i->type & ITER_PIPE)) {
+		if (i->iov_offset && allocated(&i->pipe->bufs[i->idx]))
+			return size | i->iov_offset;
+		return size;
+	}
 	iterate_all_kinds(i, size, v,
 		(res |= (unsigned long)v.iov_base | v.iov_len, 0),
 		res |= v.bv_offset | v.bv_len,
@@ -525,6 +810,11 @@
 	if (!size)
 		return 0;
 
+	if (unlikely(i->type & ITER_PIPE)) {
+		WARN_ON(1);
+		return ~0U;
+	}
+
 	iterate_all_kinds(i, size, v,
 		(res |= (!res ? 0 : (unsigned long)v.iov_base) |
 			(size != v.iov_len ? size : 0), 0),
@@ -537,6 +827,47 @@
 }
 EXPORT_SYMBOL(iov_iter_gap_alignment);
 
+static inline size_t __pipe_get_pages(struct iov_iter *i,
+				size_t maxsize,
+				struct page **pages,
+				int idx,
+				size_t *start)
+{
+	struct pipe_inode_info *pipe = i->pipe;
+	size_t n = push_pipe(i, maxsize, &idx, start);
+	if (!n)
+		return -EFAULT;
+
+	maxsize = n;
+	n += *start;
+	while (n >= PAGE_SIZE) {
+		get_page(*pages++ = pipe->bufs[idx].page);
+		idx = next_idx(idx, pipe);
+		n -= PAGE_SIZE;
+	}
+
+	return maxsize;
+}
+
+static ssize_t pipe_get_pages(struct iov_iter *i,
+		   struct page **pages, size_t maxsize, unsigned maxpages,
+		   size_t *start)
+{
+	unsigned npages;
+	size_t capacity;
+	int idx;
+
+	if (!sanity(i))
+		return -EFAULT;
+
+	data_start(i, &idx, start);
+	/* some of this one + all after this one */
+	npages = ((i->pipe->curbuf - idx - 1) & (i->pipe->buffers - 1)) + 1;
+	capacity = min(npages,maxpages) * PAGE_SIZE - *start;
+
+	return __pipe_get_pages(i, min(maxsize, capacity), pages, idx, start);
+}
+
 ssize_t iov_iter_get_pages(struct iov_iter *i,
 		   struct page **pages, size_t maxsize, unsigned maxpages,
 		   size_t *start)
@@ -547,6 +878,8 @@
 	if (!maxsize)
 		return 0;
 
+	if (unlikely(i->type & ITER_PIPE))
+		return pipe_get_pages(i, pages, maxsize, maxpages, start);
 	iterate_all_kinds(i, maxsize, v, ({
 		unsigned long addr = (unsigned long)v.iov_base;
 		size_t len = v.iov_len + (*start = addr & (PAGE_SIZE - 1));
@@ -582,6 +915,37 @@
 	return p;
 }
 
+static ssize_t pipe_get_pages_alloc(struct iov_iter *i,
+		   struct page ***pages, size_t maxsize,
+		   size_t *start)
+{
+	struct page **p;
+	size_t n;
+	int idx;
+	int npages;
+
+	if (!sanity(i))
+		return -EFAULT;
+
+	data_start(i, &idx, start);
+	/* some of this one + all after this one */
+	npages = ((i->pipe->curbuf - idx - 1) & (i->pipe->buffers - 1)) + 1;
+	n = npages * PAGE_SIZE - *start;
+	if (maxsize > n)
+		maxsize = n;
+	else
+		npages = DIV_ROUND_UP(maxsize + *start, PAGE_SIZE);
+	p = get_pages_array(npages);
+	if (!p)
+		return -ENOMEM;
+	n = __pipe_get_pages(i, maxsize, p, idx, start);
+	if (n > 0)
+		*pages = p;
+	else
+		kvfree(p);
+	return n;
+}
+
 ssize_t iov_iter_get_pages_alloc(struct iov_iter *i,
 		   struct page ***pages, size_t maxsize,
 		   size_t *start)
@@ -594,6 +958,8 @@
 	if (!maxsize)
 		return 0;
 
+	if (unlikely(i->type & ITER_PIPE))
+		return pipe_get_pages_alloc(i, pages, maxsize, start);
 	iterate_all_kinds(i, maxsize, v, ({
 		unsigned long addr = (unsigned long)v.iov_base;
 		size_t len = v.iov_len + (*start = addr & (PAGE_SIZE - 1));
@@ -635,6 +1001,10 @@
 	__wsum sum, next;
 	size_t off = 0;
 	sum = *csum;
+	if (unlikely(i->type & ITER_PIPE)) {
+		WARN_ON(1);
+		return 0;
+	}
 	iterate_and_advance(i, bytes, v, ({
 		int err = 0;
 		next = csum_and_copy_from_user(v.iov_base, 
@@ -673,6 +1043,10 @@
 	__wsum sum, next;
 	size_t off = 0;
 	sum = *csum;
+	if (unlikely(i->type & ITER_PIPE)) {
+		WARN_ON(1);	/* for now */
+		return 0;
+	}
 	iterate_and_advance(i, bytes, v, ({
 		int err = 0;
 		next = csum_and_copy_to_user((from += v.iov_len) - v.iov_len,
@@ -712,7 +1086,20 @@
 	if (!size)
 		return 0;
 
-	iterate_all_kinds(i, size, v, ({
+	if (unlikely(i->type & ITER_PIPE)) {
+		struct pipe_inode_info *pipe = i->pipe;
+		size_t off;
+		int idx;
+
+		if (!sanity(i))
+			return 0;
+
+		data_start(i, &idx, &off);
+		/* some of this one + all after this one */
+		npages = ((pipe->curbuf - idx - 1) & (pipe->buffers - 1)) + 1;
+		if (npages >= maxpages)
+			return maxpages;
+	} else iterate_all_kinds(i, size, v, ({
 		unsigned long p = (unsigned long)v.iov_base;
 		npages += DIV_ROUND_UP(p + v.iov_len, PAGE_SIZE)
 			- p / PAGE_SIZE;
@@ -737,6 +1124,10 @@
 const void *dup_iter(struct iov_iter *new, struct iov_iter *old, gfp_t flags)
 {
 	*new = *old;
+	if (unlikely(new->type & ITER_PIPE)) {
+		WARN_ON(1);
+		return NULL;
+	}
 	if (new->type & ITER_BVEC)
 		return new->bvec = kmemdup(new->bvec,
 				    new->nr_segs * sizeof(struct bio_vec),
diff --git a/lib/sbitmap.c b/lib/sbitmap.c
new file mode 100644
index 0000000..2cecf05
--- /dev/null
+++ b/lib/sbitmap.c
@@ -0,0 +1,347 @@
+/*
+ * Copyright (C) 2016 Facebook
+ * Copyright (C) 2013-2014 Jens Axboe
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public
+ * License v2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ */
+
+#include <linux/random.h>
+#include <linux/sbitmap.h>
+
+int sbitmap_init_node(struct sbitmap *sb, unsigned int depth, int shift,
+		      gfp_t flags, int node)
+{
+	unsigned int bits_per_word;
+	unsigned int i;
+
+	if (shift < 0) {
+		shift = ilog2(BITS_PER_LONG);
+		/*
+		 * If the bitmap is small, shrink the number of bits per word so
+		 * we spread over a few cachelines, at least. If less than 4
+		 * bits, just forget about it, it's not going to work optimally
+		 * anyway.
+		 */
+		if (depth >= 4) {
+			while ((4U << shift) > depth)
+				shift--;
+		}
+	}
+	bits_per_word = 1U << shift;
+	if (bits_per_word > BITS_PER_LONG)
+		return -EINVAL;
+
+	sb->shift = shift;
+	sb->depth = depth;
+	sb->map_nr = DIV_ROUND_UP(sb->depth, bits_per_word);
+
+	if (depth == 0) {
+		sb->map = NULL;
+		return 0;
+	}
+
+	sb->map = kzalloc_node(sb->map_nr * sizeof(*sb->map), flags, node);
+	if (!sb->map)
+		return -ENOMEM;
+
+	for (i = 0; i < sb->map_nr; i++) {
+		sb->map[i].depth = min(depth, bits_per_word);
+		depth -= sb->map[i].depth;
+	}
+	return 0;
+}
+EXPORT_SYMBOL_GPL(sbitmap_init_node);
+
+void sbitmap_resize(struct sbitmap *sb, unsigned int depth)
+{
+	unsigned int bits_per_word = 1U << sb->shift;
+	unsigned int i;
+
+	sb->depth = depth;
+	sb->map_nr = DIV_ROUND_UP(sb->depth, bits_per_word);
+
+	for (i = 0; i < sb->map_nr; i++) {
+		sb->map[i].depth = min(depth, bits_per_word);
+		depth -= sb->map[i].depth;
+	}
+}
+EXPORT_SYMBOL_GPL(sbitmap_resize);
+
+static int __sbitmap_get_word(struct sbitmap_word *word, unsigned int hint,
+			      bool wrap)
+{
+	unsigned int orig_hint = hint;
+	int nr;
+
+	while (1) {
+		nr = find_next_zero_bit(&word->word, word->depth, hint);
+		if (unlikely(nr >= word->depth)) {
+			/*
+			 * We started with an offset, and we didn't reset the
+			 * offset to 0 in a failure case, so start from 0 to
+			 * exhaust the map.
+			 */
+			if (orig_hint && hint && wrap) {
+				hint = orig_hint = 0;
+				continue;
+			}
+			return -1;
+		}
+
+		if (!test_and_set_bit(nr, &word->word))
+			break;
+
+		hint = nr + 1;
+		if (hint >= word->depth - 1)
+			hint = 0;
+	}
+
+	return nr;
+}
+
+int sbitmap_get(struct sbitmap *sb, unsigned int alloc_hint, bool round_robin)
+{
+	unsigned int i, index;
+	int nr = -1;
+
+	index = SB_NR_TO_INDEX(sb, alloc_hint);
+
+	for (i = 0; i < sb->map_nr; i++) {
+		nr = __sbitmap_get_word(&sb->map[index],
+					SB_NR_TO_BIT(sb, alloc_hint),
+					!round_robin);
+		if (nr != -1) {
+			nr += index << sb->shift;
+			break;
+		}
+
+		/* Jump to next index. */
+		index++;
+		alloc_hint = index << sb->shift;
+
+		if (index >= sb->map_nr) {
+			index = 0;
+			alloc_hint = 0;
+		}
+	}
+
+	return nr;
+}
+EXPORT_SYMBOL_GPL(sbitmap_get);
+
+bool sbitmap_any_bit_set(const struct sbitmap *sb)
+{
+	unsigned int i;
+
+	for (i = 0; i < sb->map_nr; i++) {
+		if (sb->map[i].word)
+			return true;
+	}
+	return false;
+}
+EXPORT_SYMBOL_GPL(sbitmap_any_bit_set);
+
+bool sbitmap_any_bit_clear(const struct sbitmap *sb)
+{
+	unsigned int i;
+
+	for (i = 0; i < sb->map_nr; i++) {
+		const struct sbitmap_word *word = &sb->map[i];
+		unsigned long ret;
+
+		ret = find_first_zero_bit(&word->word, word->depth);
+		if (ret < word->depth)
+			return true;
+	}
+	return false;
+}
+EXPORT_SYMBOL_GPL(sbitmap_any_bit_clear);
+
+unsigned int sbitmap_weight(const struct sbitmap *sb)
+{
+	unsigned int i, weight = 0;
+
+	for (i = 0; i < sb->map_nr; i++) {
+		const struct sbitmap_word *word = &sb->map[i];
+
+		weight += bitmap_weight(&word->word, word->depth);
+	}
+	return weight;
+}
+EXPORT_SYMBOL_GPL(sbitmap_weight);
+
+static unsigned int sbq_calc_wake_batch(unsigned int depth)
+{
+	unsigned int wake_batch;
+
+	/*
+	 * For each batch, we wake up one queue. We need to make sure that our
+	 * batch size is small enough that the full depth of the bitmap is
+	 * enough to wake up all of the queues.
+	 */
+	wake_batch = SBQ_WAKE_BATCH;
+	if (wake_batch > depth / SBQ_WAIT_QUEUES)
+		wake_batch = max(1U, depth / SBQ_WAIT_QUEUES);
+
+	return wake_batch;
+}
+
+int sbitmap_queue_init_node(struct sbitmap_queue *sbq, unsigned int depth,
+			    int shift, bool round_robin, gfp_t flags, int node)
+{
+	int ret;
+	int i;
+
+	ret = sbitmap_init_node(&sbq->sb, depth, shift, flags, node);
+	if (ret)
+		return ret;
+
+	sbq->alloc_hint = alloc_percpu_gfp(unsigned int, flags);
+	if (!sbq->alloc_hint) {
+		sbitmap_free(&sbq->sb);
+		return -ENOMEM;
+	}
+
+	if (depth && !round_robin) {
+		for_each_possible_cpu(i)
+			*per_cpu_ptr(sbq->alloc_hint, i) = prandom_u32() % depth;
+	}
+
+	sbq->wake_batch = sbq_calc_wake_batch(depth);
+	atomic_set(&sbq->wake_index, 0);
+
+	sbq->ws = kzalloc_node(SBQ_WAIT_QUEUES * sizeof(*sbq->ws), flags, node);
+	if (!sbq->ws) {
+		free_percpu(sbq->alloc_hint);
+		sbitmap_free(&sbq->sb);
+		return -ENOMEM;
+	}
+
+	for (i = 0; i < SBQ_WAIT_QUEUES; i++) {
+		init_waitqueue_head(&sbq->ws[i].wait);
+		atomic_set(&sbq->ws[i].wait_cnt, sbq->wake_batch);
+	}
+
+	sbq->round_robin = round_robin;
+	return 0;
+}
+EXPORT_SYMBOL_GPL(sbitmap_queue_init_node);
+
+void sbitmap_queue_resize(struct sbitmap_queue *sbq, unsigned int depth)
+{
+	sbq->wake_batch = sbq_calc_wake_batch(depth);
+	sbitmap_resize(&sbq->sb, depth);
+}
+EXPORT_SYMBOL_GPL(sbitmap_queue_resize);
+
+int __sbitmap_queue_get(struct sbitmap_queue *sbq)
+{
+	unsigned int hint, depth;
+	int nr;
+
+	hint = this_cpu_read(*sbq->alloc_hint);
+	depth = READ_ONCE(sbq->sb.depth);
+	if (unlikely(hint >= depth)) {
+		hint = depth ? prandom_u32() % depth : 0;
+		this_cpu_write(*sbq->alloc_hint, hint);
+	}
+	nr = sbitmap_get(&sbq->sb, hint, sbq->round_robin);
+
+	if (nr == -1) {
+		/* If the map is full, a hint won't do us much good. */
+		this_cpu_write(*sbq->alloc_hint, 0);
+	} else if (nr == hint || unlikely(sbq->round_robin)) {
+		/* Only update the hint if we used it. */
+		hint = nr + 1;
+		if (hint >= depth - 1)
+			hint = 0;
+		this_cpu_write(*sbq->alloc_hint, hint);
+	}
+
+	return nr;
+}
+EXPORT_SYMBOL_GPL(__sbitmap_queue_get);
+
+static struct sbq_wait_state *sbq_wake_ptr(struct sbitmap_queue *sbq)
+{
+	int i, wake_index;
+
+	wake_index = atomic_read(&sbq->wake_index);
+	for (i = 0; i < SBQ_WAIT_QUEUES; i++) {
+		struct sbq_wait_state *ws = &sbq->ws[wake_index];
+
+		if (waitqueue_active(&ws->wait)) {
+			int o = atomic_read(&sbq->wake_index);
+
+			if (wake_index != o)
+				atomic_cmpxchg(&sbq->wake_index, o, wake_index);
+			return ws;
+		}
+
+		wake_index = sbq_index_inc(wake_index);
+	}
+
+	return NULL;
+}
+
+static void sbq_wake_up(struct sbitmap_queue *sbq)
+{
+	struct sbq_wait_state *ws;
+	int wait_cnt;
+
+	/* Ensure that the wait list checks occur after clear_bit(). */
+	smp_mb();
+
+	ws = sbq_wake_ptr(sbq);
+	if (!ws)
+		return;
+
+	wait_cnt = atomic_dec_return(&ws->wait_cnt);
+	if (unlikely(wait_cnt < 0))
+		wait_cnt = atomic_inc_return(&ws->wait_cnt);
+	if (wait_cnt == 0) {
+		atomic_add(sbq->wake_batch, &ws->wait_cnt);
+		sbq_index_atomic_inc(&sbq->wake_index);
+		wake_up(&ws->wait);
+	}
+}
+
+void sbitmap_queue_clear(struct sbitmap_queue *sbq, unsigned int nr,
+			 unsigned int cpu)
+{
+	sbitmap_clear_bit(&sbq->sb, nr);
+	sbq_wake_up(sbq);
+	if (likely(!sbq->round_robin && nr < sbq->sb.depth))
+		*per_cpu_ptr(sbq->alloc_hint, cpu) = nr;
+}
+EXPORT_SYMBOL_GPL(sbitmap_queue_clear);
+
+void sbitmap_queue_wake_all(struct sbitmap_queue *sbq)
+{
+	int i, wake_index;
+
+	/*
+	 * Make sure all changes prior to this are visible from other CPUs.
+	 */
+	smp_mb();
+	wake_index = atomic_read(&sbq->wake_index);
+	for (i = 0; i < SBQ_WAIT_QUEUES; i++) {
+		struct sbq_wait_state *ws = &sbq->ws[wake_index];
+
+		if (waitqueue_active(&ws->wait))
+			wake_up(&ws->wait);
+
+		wake_index = sbq_index_inc(wake_index);
+	}
+}
+EXPORT_SYMBOL_GPL(sbitmap_queue_wake_all);
diff --git a/mm/shmem.c b/mm/shmem.c
index dee0631..0e9901e 100644
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -2311,119 +2311,6 @@
 	return retval ? retval : error;
 }
 
-static ssize_t shmem_file_splice_read(struct file *in, loff_t *ppos,
-				struct pipe_inode_info *pipe, size_t len,
-				unsigned int flags)
-{
-	struct address_space *mapping = in->f_mapping;
-	struct inode *inode = mapping->host;
-	unsigned int loff, nr_pages, req_pages;
-	struct page *pages[PIPE_DEF_BUFFERS];
-	struct partial_page partial[PIPE_DEF_BUFFERS];
-	struct page *page;
-	pgoff_t index, end_index;
-	loff_t isize, left;
-	int error, page_nr;
-	struct splice_pipe_desc spd = {
-		.pages = pages,
-		.partial = partial,
-		.nr_pages_max = PIPE_DEF_BUFFERS,
-		.flags = flags,
-		.ops = &page_cache_pipe_buf_ops,
-		.spd_release = spd_release_page,
-	};
-
-	isize = i_size_read(inode);
-	if (unlikely(*ppos >= isize))
-		return 0;
-
-	left = isize - *ppos;
-	if (unlikely(left < len))
-		len = left;
-
-	if (splice_grow_spd(pipe, &spd))
-		return -ENOMEM;
-
-	index = *ppos >> PAGE_SHIFT;
-	loff = *ppos & ~PAGE_MASK;
-	req_pages = (len + loff + PAGE_SIZE - 1) >> PAGE_SHIFT;
-	nr_pages = min(req_pages, spd.nr_pages_max);
-
-	spd.nr_pages = find_get_pages_contig(mapping, index,
-						nr_pages, spd.pages);
-	index += spd.nr_pages;
-	error = 0;
-
-	while (spd.nr_pages < nr_pages) {
-		error = shmem_getpage(inode, index, &page, SGP_CACHE);
-		if (error)
-			break;
-		unlock_page(page);
-		spd.pages[spd.nr_pages++] = page;
-		index++;
-	}
-
-	index = *ppos >> PAGE_SHIFT;
-	nr_pages = spd.nr_pages;
-	spd.nr_pages = 0;
-
-	for (page_nr = 0; page_nr < nr_pages; page_nr++) {
-		unsigned int this_len;
-
-		if (!len)
-			break;
-
-		this_len = min_t(unsigned long, len, PAGE_SIZE - loff);
-		page = spd.pages[page_nr];
-
-		if (!PageUptodate(page) || page->mapping != mapping) {
-			error = shmem_getpage(inode, index, &page, SGP_CACHE);
-			if (error)
-				break;
-			unlock_page(page);
-			put_page(spd.pages[page_nr]);
-			spd.pages[page_nr] = page;
-		}
-
-		isize = i_size_read(inode);
-		end_index = (isize - 1) >> PAGE_SHIFT;
-		if (unlikely(!isize || index > end_index))
-			break;
-
-		if (end_index == index) {
-			unsigned int plen;
-
-			plen = ((isize - 1) & ~PAGE_MASK) + 1;
-			if (plen <= loff)
-				break;
-
-			this_len = min(this_len, plen - loff);
-			len = this_len;
-		}
-
-		spd.partial[page_nr].offset = loff;
-		spd.partial[page_nr].len = this_len;
-		len -= this_len;
-		loff = 0;
-		spd.nr_pages++;
-		index++;
-	}
-
-	while (page_nr < nr_pages)
-		put_page(spd.pages[page_nr++]);
-
-	if (spd.nr_pages)
-		error = splice_to_pipe(pipe, &spd);
-
-	splice_shrink_spd(&spd);
-
-	if (error > 0) {
-		*ppos += error;
-		file_accessed(in);
-	}
-	return error;
-}
-
 /*
  * llseek SEEK_DATA or SEEK_HOLE through the radix_tree.
  */
@@ -3786,7 +3673,7 @@
 	.read_iter	= shmem_file_read_iter,
 	.write_iter	= generic_file_write_iter,
 	.fsync		= noop_fsync,
-	.splice_read	= shmem_file_splice_read,
+	.splice_read	= generic_file_splice_read,
 	.splice_write	= iter_file_splice_write,
 	.fallocate	= shmem_fallocate,
 #endif
diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index cbd19d2..1e3e008 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -1962,37 +1962,13 @@
 	return false;
 }
 
-ssize_t skb_socket_splice(struct sock *sk,
-			  struct pipe_inode_info *pipe,
-			  struct splice_pipe_desc *spd)
-{
-	int ret;
-
-	/* Drop the socket lock, otherwise we have reverse
-	 * locking dependencies between sk_lock and i_mutex
-	 * here as compared to sendfile(). We enter here
-	 * with the socket lock held, and splice_to_pipe() will
-	 * grab the pipe inode lock. For sendfile() emulation,
-	 * we call into ->sendpage() with the i_mutex lock held
-	 * and networking will grab the socket lock.
-	 */
-	release_sock(sk);
-	ret = splice_to_pipe(pipe, spd);
-	lock_sock(sk);
-
-	return ret;
-}
-
 /*
  * Map data from the skb to a pipe. Should handle both the linear part,
  * the fragments, and the frag list.
  */
 int skb_splice_bits(struct sk_buff *skb, struct sock *sk, unsigned int offset,
 		    struct pipe_inode_info *pipe, unsigned int tlen,
-		    unsigned int flags,
-		    ssize_t (*splice_cb)(struct sock *,
-					 struct pipe_inode_info *,
-					 struct splice_pipe_desc *))
+		    unsigned int flags)
 {
 	struct partial_page partial[MAX_SKB_FRAGS];
 	struct page *pages[MAX_SKB_FRAGS];
@@ -2009,7 +1985,7 @@
 	__skb_splice_bits(skb, pipe, &offset, &tlen, &spd, sk);
 
 	if (spd.nr_pages)
-		ret = splice_cb(sk, pipe, &spd);
+		ret = splice_to_pipe(pipe, &spd);
 
 	return ret;
 }
diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index ab984d2..3251fe7 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -689,8 +689,7 @@
 	int ret;
 
 	ret = skb_splice_bits(skb, skb->sk, offset, tss->pipe,
-			      min(rd_desc->count, len), tss->flags,
-			      skb_socket_splice);
+			      min(rd_desc->count, len), tss->flags);
 	if (ret > 0)
 		rd_desc->count -= ret;
 	return ret;
diff --git a/net/kcm/kcmsock.c b/net/kcm/kcmsock.c
index b7f869a8..7e08a4d 100644
--- a/net/kcm/kcmsock.c
+++ b/net/kcm/kcmsock.c
@@ -1160,19 +1160,6 @@
 	return copied ? : err;
 }
 
-static ssize_t kcm_sock_splice(struct sock *sk,
-			       struct pipe_inode_info *pipe,
-			       struct splice_pipe_desc *spd)
-{
-	int ret;
-
-	release_sock(sk);
-	ret = splice_to_pipe(pipe, spd);
-	lock_sock(sk);
-
-	return ret;
-}
-
 static ssize_t kcm_splice_read(struct socket *sock, loff_t *ppos,
 			       struct pipe_inode_info *pipe, size_t len,
 			       unsigned int flags)
@@ -1202,8 +1189,7 @@
 	if (len > rxm->full_len)
 		len = rxm->full_len;
 
-	copied = skb_splice_bits(skb, sk, rxm->offset, pipe, len, flags,
-				 kcm_sock_splice);
+	copied = skb_splice_bits(skb, sk, rxm->offset, pipe, len, flags);
 	if (copied < 0) {
 		err = copied;
 		goto err_out;
diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c
index 8309687..145082e 100644
--- a/net/unix/af_unix.c
+++ b/net/unix/af_unix.c
@@ -2475,28 +2475,13 @@
 	return unix_stream_read_generic(&state);
 }
 
-static ssize_t skb_unix_socket_splice(struct sock *sk,
-				      struct pipe_inode_info *pipe,
-				      struct splice_pipe_desc *spd)
-{
-	int ret;
-	struct unix_sock *u = unix_sk(sk);
-
-	mutex_unlock(&u->iolock);
-	ret = splice_to_pipe(pipe, spd);
-	mutex_lock(&u->iolock);
-
-	return ret;
-}
-
 static int unix_stream_splice_actor(struct sk_buff *skb,
 				    int skip, int chunk,
 				    struct unix_stream_read_state *state)
 {
 	return skb_splice_bits(skb, state->socket->sk,
 			       UNIXCB(skb).consumed + skip,
-			       state->pipe, chunk, state->splice_flags,
-			       skb_unix_socket_splice);
+			       state->pipe, chunk, state->splice_flags);
 }
 
 static ssize_t unix_stream_splice_read(struct socket *sock,  loff_t *ppos,
diff --git a/sound/aoa/core/gpio-feature.c b/sound/aoa/core/gpio-feature.c
index f341539..7196008 100644
--- a/sound/aoa/core/gpio-feature.c
+++ b/sound/aoa/core/gpio-feature.c
@@ -118,7 +118,7 @@
 	if (np)
 		*irqptr = irq_of_parse_and_map(np, 0);
 	else
-		*irqptr = NO_IRQ;
+		*irqptr = 0;
 }
 
 /* 0x4 is outenable, 0x1 is out, thus 4 or 5 */
@@ -336,7 +336,7 @@
 		return -EINVAL;
 	}
 
-	if (irq == NO_IRQ)
+	if (!irq)
 		return -ENODEV;
 
 	mutex_lock(&notif->mutex);
diff --git a/sound/ppc/tumbler.c b/sound/ppc/tumbler.c
index c8fafba..58ee808 100644
--- a/sound/ppc/tumbler.c
+++ b/sound/ppc/tumbler.c
@@ -1303,19 +1303,19 @@
 				    &mix->line_mute, 1);
 	irq = tumbler_find_device("headphone-detect",
 				  NULL, &mix->hp_detect, 0);
-	if (irq <= NO_IRQ)
+	if (irq <= 0)
 		irq = tumbler_find_device("headphone-detect",
 					  NULL, &mix->hp_detect, 1);
-	if (irq <= NO_IRQ)
+	if (irq <= 0)
 		irq = tumbler_find_device("keywest-gpio15",
 					  NULL, &mix->hp_detect, 1);
 	mix->headphone_irq = irq;
  	irq = tumbler_find_device("line-output-detect",
 				  NULL, &mix->line_detect, 0);
- 	if (irq <= NO_IRQ)
+	if (irq <= 0)
 		irq = tumbler_find_device("line-output-detect",
 					  NULL, &mix->line_detect, 1);
-	if (IS_G4DA && irq <= NO_IRQ)
+	if (IS_G4DA && irq <= 0)
 		irq = tumbler_find_device("keywest-gpio16",
 					  NULL, &mix->line_detect, 1);
 	mix->lineout_irq = irq;
diff --git a/tools/testing/selftests/powerpc/Makefile b/tools/testing/selftests/powerpc/Makefile
index 1cc6d64..db54a33 100644
--- a/tools/testing/selftests/powerpc/Makefile
+++ b/tools/testing/selftests/powerpc/Makefile
@@ -19,6 +19,7 @@
 	   dscr			\
 	   mm			\
 	   pmu			\
+	   signal		\
 	   primitives		\
 	   stringloops		\
 	   switch_endian	\
diff --git a/tools/testing/selftests/powerpc/fpu_asm.h b/tools/testing/selftests/powerpc/fpu_asm.h
new file mode 100644
index 0000000..6a387d2
--- /dev/null
+++ b/tools/testing/selftests/powerpc/fpu_asm.h
@@ -0,0 +1,80 @@
+/*
+ * Copyright 2016, Cyril Bur, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _SELFTESTS_POWERPC_FPU_ASM_H
+#define _SELFTESTS_POWERPC_FPU_ASM_H
+#include "basic_asm.h"
+
+#define PUSH_FPU(stack_size) \
+	stfd	f31,(stack_size + STACK_FRAME_MIN_SIZE)(%r1); \
+	stfd	f30,(stack_size + STACK_FRAME_MIN_SIZE - 8)(%r1); \
+	stfd	f29,(stack_size + STACK_FRAME_MIN_SIZE - 16)(%r1); \
+	stfd	f28,(stack_size + STACK_FRAME_MIN_SIZE - 24)(%r1); \
+	stfd	f27,(stack_size + STACK_FRAME_MIN_SIZE - 32)(%r1); \
+	stfd	f26,(stack_size + STACK_FRAME_MIN_SIZE - 40)(%r1); \
+	stfd	f25,(stack_size + STACK_FRAME_MIN_SIZE - 48)(%r1); \
+	stfd	f24,(stack_size + STACK_FRAME_MIN_SIZE - 56)(%r1); \
+	stfd	f23,(stack_size + STACK_FRAME_MIN_SIZE - 64)(%r1); \
+	stfd	f22,(stack_size + STACK_FRAME_MIN_SIZE - 72)(%r1); \
+	stfd	f21,(stack_size + STACK_FRAME_MIN_SIZE - 80)(%r1); \
+	stfd	f20,(stack_size + STACK_FRAME_MIN_SIZE - 88)(%r1); \
+	stfd	f19,(stack_size + STACK_FRAME_MIN_SIZE - 96)(%r1); \
+	stfd	f18,(stack_size + STACK_FRAME_MIN_SIZE - 104)(%r1); \
+	stfd	f17,(stack_size + STACK_FRAME_MIN_SIZE - 112)(%r1); \
+	stfd	f16,(stack_size + STACK_FRAME_MIN_SIZE - 120)(%r1); \
+	stfd	f15,(stack_size + STACK_FRAME_MIN_SIZE - 128)(%r1); \
+	stfd	f14,(stack_size + STACK_FRAME_MIN_SIZE - 136)(%r1);
+
+#define POP_FPU(stack_size) \
+	lfd	f31,(stack_size + STACK_FRAME_MIN_SIZE)(%r1); \
+	lfd	f30,(stack_size + STACK_FRAME_MIN_SIZE - 8)(%r1); \
+	lfd	f29,(stack_size + STACK_FRAME_MIN_SIZE - 16)(%r1); \
+	lfd	f28,(stack_size + STACK_FRAME_MIN_SIZE - 24)(%r1); \
+	lfd	f27,(stack_size + STACK_FRAME_MIN_SIZE - 32)(%r1); \
+	lfd	f26,(stack_size + STACK_FRAME_MIN_SIZE - 40)(%r1); \
+	lfd	f25,(stack_size + STACK_FRAME_MIN_SIZE - 48)(%r1); \
+	lfd	f24,(stack_size + STACK_FRAME_MIN_SIZE - 56)(%r1); \
+	lfd	f23,(stack_size + STACK_FRAME_MIN_SIZE - 64)(%r1); \
+	lfd	f22,(stack_size + STACK_FRAME_MIN_SIZE - 72)(%r1); \
+	lfd	f21,(stack_size + STACK_FRAME_MIN_SIZE - 80)(%r1); \
+	lfd	f20,(stack_size + STACK_FRAME_MIN_SIZE - 88)(%r1); \
+	lfd	f19,(stack_size + STACK_FRAME_MIN_SIZE - 96)(%r1); \
+	lfd	f18,(stack_size + STACK_FRAME_MIN_SIZE - 104)(%r1); \
+	lfd	f17,(stack_size + STACK_FRAME_MIN_SIZE - 112)(%r1); \
+	lfd	f16,(stack_size + STACK_FRAME_MIN_SIZE - 120)(%r1); \
+	lfd	f15,(stack_size + STACK_FRAME_MIN_SIZE - 128)(%r1); \
+	lfd	f14,(stack_size + STACK_FRAME_MIN_SIZE - 136)(%r1);
+
+/*
+ * Careful calling this, it will 'clobber' fpu (by design)
+ * Don't call this from C
+ */
+FUNC_START(load_fpu)
+	lfd	f14,0(r3)
+	lfd	f15,8(r3)
+	lfd	f16,16(r3)
+	lfd	f17,24(r3)
+	lfd	f18,32(r3)
+	lfd	f19,40(r3)
+	lfd	f20,48(r3)
+	lfd	f21,56(r3)
+	lfd	f22,64(r3)
+	lfd	f23,72(r3)
+	lfd	f24,80(r3)
+	lfd	f25,88(r3)
+	lfd	f26,96(r3)
+	lfd	f27,104(r3)
+	lfd	f28,112(r3)
+	lfd	f29,120(r3)
+	lfd	f30,128(r3)
+	lfd	f31,136(r3)
+	blr
+FUNC_END(load_fpu)
+
+#endif /* _SELFTESTS_POWERPC_FPU_ASM_H */
diff --git a/tools/testing/selftests/powerpc/gpr_asm.h b/tools/testing/selftests/powerpc/gpr_asm.h
new file mode 100644
index 0000000..f6f3885
--- /dev/null
+++ b/tools/testing/selftests/powerpc/gpr_asm.h
@@ -0,0 +1,96 @@
+/*
+ * Copyright 2016, Cyril Bur, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _SELFTESTS_POWERPC_GPR_ASM_H
+#define _SELFTESTS_POWERPC_GPR_ASM_H
+
+#include "basic_asm.h"
+
+#define __PUSH_NVREGS(top_pos); \
+	std r31,(top_pos)(%r1); \
+	std r30,(top_pos - 8)(%r1); \
+	std r29,(top_pos - 16)(%r1); \
+	std r28,(top_pos - 24)(%r1); \
+	std r27,(top_pos - 32)(%r1); \
+	std r26,(top_pos - 40)(%r1); \
+	std r25,(top_pos - 48)(%r1); \
+	std r24,(top_pos - 56)(%r1); \
+	std r23,(top_pos - 64)(%r1); \
+	std r22,(top_pos - 72)(%r1); \
+	std r21,(top_pos - 80)(%r1); \
+	std r20,(top_pos - 88)(%r1); \
+	std r19,(top_pos - 96)(%r1); \
+	std r18,(top_pos - 104)(%r1); \
+	std r17,(top_pos - 112)(%r1); \
+	std r16,(top_pos - 120)(%r1); \
+	std r15,(top_pos - 128)(%r1); \
+	std r14,(top_pos - 136)(%r1)
+
+#define __POP_NVREGS(top_pos); \
+	ld r31,(top_pos)(%r1); \
+	ld r30,(top_pos - 8)(%r1); \
+	ld r29,(top_pos - 16)(%r1); \
+	ld r28,(top_pos - 24)(%r1); \
+	ld r27,(top_pos - 32)(%r1); \
+	ld r26,(top_pos - 40)(%r1); \
+	ld r25,(top_pos - 48)(%r1); \
+	ld r24,(top_pos - 56)(%r1); \
+	ld r23,(top_pos - 64)(%r1); \
+	ld r22,(top_pos - 72)(%r1); \
+	ld r21,(top_pos - 80)(%r1); \
+	ld r20,(top_pos - 88)(%r1); \
+	ld r19,(top_pos - 96)(%r1); \
+	ld r18,(top_pos - 104)(%r1); \
+	ld r17,(top_pos - 112)(%r1); \
+	ld r16,(top_pos - 120)(%r1); \
+	ld r15,(top_pos - 128)(%r1); \
+	ld r14,(top_pos - 136)(%r1)
+
+#define PUSH_NVREGS(stack_size) \
+	__PUSH_NVREGS(stack_size + STACK_FRAME_MIN_SIZE)
+
+/* 18 NV FPU REGS */
+#define PUSH_NVREGS_BELOW_FPU(stack_size) \
+	__PUSH_NVREGS(stack_size + STACK_FRAME_MIN_SIZE - (18 * 8))
+
+#define POP_NVREGS(stack_size) \
+	__POP_NVREGS(stack_size + STACK_FRAME_MIN_SIZE)
+
+/* 18 NV FPU REGS */
+#define POP_NVREGS_BELOW_FPU(stack_size) \
+	__POP_NVREGS(stack_size + STACK_FRAME_MIN_SIZE - (18 * 8))
+
+/*
+ * Careful calling this, it will 'clobber' NVGPRs (by design)
+ * Don't call this from C
+ */
+FUNC_START(load_gpr)
+	ld	r14,0(r3)
+	ld	r15,8(r3)
+	ld	r16,16(r3)
+	ld	r17,24(r3)
+	ld	r18,32(r3)
+	ld	r19,40(r3)
+	ld	r20,48(r3)
+	ld	r21,56(r3)
+	ld	r22,64(r3)
+	ld	r23,72(r3)
+	ld	r24,80(r3)
+	ld	r25,88(r3)
+	ld	r26,96(r3)
+	ld	r27,104(r3)
+	ld	r28,112(r3)
+	ld	r29,120(r3)
+	ld	r30,128(r3)
+	ld	r31,136(r3)
+	blr
+FUNC_END(load_gpr)
+
+
+#endif /* _SELFTESTS_POWERPC_GPR_ASM_H */
diff --git a/tools/testing/selftests/powerpc/harness.c b/tools/testing/selftests/powerpc/harness.c
index 52f9be7..248a820 100644
--- a/tools/testing/selftests/powerpc/harness.c
+++ b/tools/testing/selftests/powerpc/harness.c
@@ -19,9 +19,9 @@
 #include "subunit.h"
 #include "utils.h"
 
-#define TIMEOUT		120
 #define KILL_TIMEOUT	5
 
+static uint64_t timeout = 120;
 
 int run_test(int (test_function)(void), char *name)
 {
@@ -44,7 +44,7 @@
 	setpgid(pid, pid);
 
 	/* Wake us up in timeout seconds */
-	alarm(TIMEOUT);
+	alarm(timeout);
 	terminated = false;
 
 wait:
@@ -94,6 +94,11 @@
 	.sa_handler = alarm_handler,
 };
 
+void test_harness_set_timeout(uint64_t time)
+{
+	timeout = time;
+}
+
 int test_harness(int (test_function)(void), char *name)
 {
 	int rc;
diff --git a/tools/testing/selftests/powerpc/math/Makefile b/tools/testing/selftests/powerpc/math/Makefile
index 5b88875..a505b66 100644
--- a/tools/testing/selftests/powerpc/math/Makefile
+++ b/tools/testing/selftests/powerpc/math/Makefile
@@ -1,4 +1,4 @@
-TEST_PROGS := fpu_syscall fpu_preempt fpu_signal vmx_syscall vmx_preempt vmx_signal
+TEST_PROGS := fpu_syscall fpu_preempt fpu_signal vmx_syscall vmx_preempt vmx_signal vsx_preempt
 
 all: $(TEST_PROGS)
 
@@ -13,6 +13,9 @@
 vmx_preempt: vmx_asm.S
 vmx_signal: vmx_asm.S
 
+vsx_preempt: CFLAGS += -mvsx
+vsx_preempt: vsx_asm.S
+
 include ../../lib.mk
 
 clean:
diff --git a/tools/testing/selftests/powerpc/math/fpu_asm.S b/tools/testing/selftests/powerpc/math/fpu_asm.S
index f3711d8..241f067 100644
--- a/tools/testing/selftests/powerpc/math/fpu_asm.S
+++ b/tools/testing/selftests/powerpc/math/fpu_asm.S
@@ -8,70 +8,7 @@
  */
 
 #include "../basic_asm.h"
-
-#define PUSH_FPU(pos) \
-	stfd	f14,pos(sp); \
-	stfd	f15,pos+8(sp); \
-	stfd	f16,pos+16(sp); \
-	stfd	f17,pos+24(sp); \
-	stfd	f18,pos+32(sp); \
-	stfd	f19,pos+40(sp); \
-	stfd	f20,pos+48(sp); \
-	stfd	f21,pos+56(sp); \
-	stfd	f22,pos+64(sp); \
-	stfd	f23,pos+72(sp); \
-	stfd	f24,pos+80(sp); \
-	stfd	f25,pos+88(sp); \
-	stfd	f26,pos+96(sp); \
-	stfd	f27,pos+104(sp); \
-	stfd	f28,pos+112(sp); \
-	stfd	f29,pos+120(sp); \
-	stfd	f30,pos+128(sp); \
-	stfd	f31,pos+136(sp);
-
-#define POP_FPU(pos) \
-	lfd	f14,pos(sp); \
-	lfd	f15,pos+8(sp); \
-	lfd	f16,pos+16(sp); \
-	lfd	f17,pos+24(sp); \
-	lfd	f18,pos+32(sp); \
-	lfd	f19,pos+40(sp); \
-	lfd	f20,pos+48(sp); \
-	lfd	f21,pos+56(sp); \
-	lfd	f22,pos+64(sp); \
-	lfd	f23,pos+72(sp); \
-	lfd	f24,pos+80(sp); \
-	lfd	f25,pos+88(sp); \
-	lfd	f26,pos+96(sp); \
-	lfd	f27,pos+104(sp); \
-	lfd	f28,pos+112(sp); \
-	lfd	f29,pos+120(sp); \
-	lfd	f30,pos+128(sp); \
-	lfd	f31,pos+136(sp);
-
-# Careful calling this, it will 'clobber' fpu (by design)
-# Don't call this from C
-FUNC_START(load_fpu)
-	lfd	f14,0(r3)
-	lfd	f15,8(r3)
-	lfd	f16,16(r3)
-	lfd	f17,24(r3)
-	lfd	f18,32(r3)
-	lfd	f19,40(r3)
-	lfd	f20,48(r3)
-	lfd	f21,56(r3)
-	lfd	f22,64(r3)
-	lfd	f23,72(r3)
-	lfd	f24,80(r3)
-	lfd	f25,88(r3)
-	lfd	f26,96(r3)
-	lfd	f27,104(r3)
-	lfd	f28,112(r3)
-	lfd	f29,120(r3)
-	lfd	f30,128(r3)
-	lfd	f31,136(r3)
-	blr
-FUNC_END(load_fpu)
+#include "../fpu_asm.h"
 
 FUNC_START(check_fpu)
 	mr r4,r3
@@ -138,9 +75,9 @@
 	# r4 holds pointer to the pid
 	# f14-f31 are non volatiles
 	PUSH_BASIC_STACK(256)
+	PUSH_FPU(256)
 	std	r3,STACK_FRAME_PARAM(0)(sp) # Address of darray
 	std r4,STACK_FRAME_PARAM(1)(sp) # Address of pid
-	PUSH_FPU(STACK_FRAME_LOCAL(2,0))
 
 	bl load_fpu
 	nop
@@ -155,7 +92,7 @@
 	bl check_fpu
 	nop
 
-	POP_FPU(STACK_FRAME_LOCAL(2,0))
+	POP_FPU(256)
 	POP_BASIC_STACK(256)
 	blr
 FUNC_END(test_fpu)
@@ -166,10 +103,10 @@
 # registers while running is not zero.
 FUNC_START(preempt_fpu)
 	PUSH_BASIC_STACK(256)
+	PUSH_FPU(256)
 	std r3,STACK_FRAME_PARAM(0)(sp) # double *darray
 	std r4,STACK_FRAME_PARAM(1)(sp) # int *threads_starting
 	std r5,STACK_FRAME_PARAM(2)(sp) # int *running
-	PUSH_FPU(STACK_FRAME_LOCAL(3,0))
 
 	bl load_fpu
 	nop
@@ -192,7 +129,7 @@
 	cmpwi r5,0
 	bne 2b
 
-3:	POP_FPU(STACK_FRAME_LOCAL(3,0))
+3:	POP_FPU(256)
 	POP_BASIC_STACK(256)
 	blr
 FUNC_END(preempt_fpu)
diff --git a/tools/testing/selftests/powerpc/math/vmx_asm.S b/tools/testing/selftests/powerpc/math/vmx_asm.S
index 1b8c248..fd74da4 100644
--- a/tools/testing/selftests/powerpc/math/vmx_asm.S
+++ b/tools/testing/selftests/powerpc/math/vmx_asm.S
@@ -8,90 +8,7 @@
  */
 
 #include "../basic_asm.h"
-
-# POS MUST BE 16 ALIGNED!
-#define PUSH_VMX(pos,reg) \
-	li	reg,pos; \
-	stvx	v20,reg,sp; \
-	addi	reg,reg,16; \
-	stvx	v21,reg,sp; \
-	addi	reg,reg,16; \
-	stvx	v22,reg,sp; \
-	addi	reg,reg,16; \
-	stvx	v23,reg,sp; \
-	addi	reg,reg,16; \
-	stvx	v24,reg,sp; \
-	addi	reg,reg,16; \
-	stvx	v25,reg,sp; \
-	addi	reg,reg,16; \
-	stvx	v26,reg,sp; \
-	addi	reg,reg,16; \
-	stvx	v27,reg,sp; \
-	addi	reg,reg,16; \
-	stvx	v28,reg,sp; \
-	addi	reg,reg,16; \
-	stvx	v29,reg,sp; \
-	addi	reg,reg,16; \
-	stvx	v30,reg,sp; \
-	addi	reg,reg,16; \
-	stvx	v31,reg,sp;
-
-# POS MUST BE 16 ALIGNED!
-#define POP_VMX(pos,reg) \
-	li	reg,pos; \
-	lvx	v20,reg,sp; \
-	addi	reg,reg,16; \
-	lvx	v21,reg,sp; \
-	addi	reg,reg,16; \
-	lvx	v22,reg,sp; \
-	addi	reg,reg,16; \
-	lvx	v23,reg,sp; \
-	addi	reg,reg,16; \
-	lvx	v24,reg,sp; \
-	addi	reg,reg,16; \
-	lvx	v25,reg,sp; \
-	addi	reg,reg,16; \
-	lvx	v26,reg,sp; \
-	addi	reg,reg,16; \
-	lvx	v27,reg,sp; \
-	addi	reg,reg,16; \
-	lvx	v28,reg,sp; \
-	addi	reg,reg,16; \
-	lvx	v29,reg,sp; \
-	addi	reg,reg,16; \
-	lvx	v30,reg,sp; \
-	addi	reg,reg,16; \
-	lvx	v31,reg,sp;
-
-# Carefull this will 'clobber' vmx (by design)
-# Don't call this from C
-FUNC_START(load_vmx)
-	li	r5,0
-	lvx	v20,r5,r3
-	addi	r5,r5,16
-	lvx	v21,r5,r3
-	addi	r5,r5,16
-	lvx	v22,r5,r3
-	addi	r5,r5,16
-	lvx	v23,r5,r3
-	addi	r5,r5,16
-	lvx	v24,r5,r3
-	addi	r5,r5,16
-	lvx	v25,r5,r3
-	addi	r5,r5,16
-	lvx	v26,r5,r3
-	addi	r5,r5,16
-	lvx	v27,r5,r3
-	addi	r5,r5,16
-	lvx	v28,r5,r3
-	addi	r5,r5,16
-	lvx	v29,r5,r3
-	addi	r5,r5,16
-	lvx	v30,r5,r3
-	addi	r5,r5,16
-	lvx	v31,r5,r3
-	blr
-FUNC_END(load_vmx)
+#include "../vmx_asm.h"
 
 # Should be safe from C, only touches r4, r5 and v0,v1,v2
 FUNC_START(check_vmx)
diff --git a/tools/testing/selftests/powerpc/math/vsx_asm.S b/tools/testing/selftests/powerpc/math/vsx_asm.S
new file mode 100644
index 0000000..a110dd8
--- /dev/null
+++ b/tools/testing/selftests/powerpc/math/vsx_asm.S
@@ -0,0 +1,61 @@
+/*
+ * Copyright 2015, Cyril Bur, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include "../basic_asm.h"
+#include "../vsx_asm.h"
+
+#long check_vsx(vector int *r3);
+#This function wraps storeing VSX regs to the end of an array and a
+#call to a comparison function in C which boils down to a memcmp()
+FUNC_START(check_vsx)
+	PUSH_BASIC_STACK(32)
+	std	r3,STACK_FRAME_PARAM(0)(sp)
+	addi r3, r3, 16 * 12 #Second half of array
+	bl store_vsx
+	ld r3,STACK_FRAME_PARAM(0)(sp)
+	bl vsx_memcmp
+	POP_BASIC_STACK(32)
+	blr
+FUNC_END(check_vsx)
+
+# int preempt_vmx(vector int *varray, int *threads_starting,
+#                 int *running);
+# On starting will (atomically) decrement threads_starting as a signal
+# that the VMX have been loaded with varray. Will proceed to check the
+# validity of the VMX registers while running is not zero.
+FUNC_START(preempt_vsx)
+	PUSH_BASIC_STACK(512)
+	std r3,STACK_FRAME_PARAM(0)(sp) # vector int *varray
+	std r4,STACK_FRAME_PARAM(1)(sp) # int *threads_starting
+	std r5,STACK_FRAME_PARAM(2)(sp) # int *running
+
+	bl load_vsx
+	nop
+
+	sync
+	# Atomic DEC
+	ld r3,STACK_FRAME_PARAM(1)(sp)
+1:	lwarx r4,0,r3
+	addi r4,r4,-1
+	stwcx. r4,0,r3
+	bne- 1b
+
+2:	ld r3,STACK_FRAME_PARAM(0)(sp)
+	bl check_vsx
+	nop
+	cmpdi r3,0
+	bne 3f
+	ld r4,STACK_FRAME_PARAM(2)(sp)
+	ld r5,0(r4)
+	cmpwi r5,0
+	bne 2b
+
+3:	POP_BASIC_STACK(512)
+	blr
+FUNC_END(preempt_vsx)
diff --git a/tools/testing/selftests/powerpc/math/vsx_preempt.c b/tools/testing/selftests/powerpc/math/vsx_preempt.c
new file mode 100644
index 0000000..6387f03
--- /dev/null
+++ b/tools/testing/selftests/powerpc/math/vsx_preempt.c
@@ -0,0 +1,147 @@
+/*
+ * Copyright 2015, Cyril Bur, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * This test attempts to see if the VSX registers change across preemption.
+ * There is no way to be sure preemption happened so this test just
+ * uses many threads and a long wait. As such, a successful test
+ * doesn't mean much but a failure is bad.
+ */
+
+#include <stdio.h>
+#include <string.h>
+#include <unistd.h>
+#include <sys/syscall.h>
+#include <sys/time.h>
+#include <sys/types.h>
+#include <sys/wait.h>
+#include <stdlib.h>
+#include <pthread.h>
+
+#include "utils.h"
+
+/* Time to wait for workers to get preempted (seconds) */
+#define PREEMPT_TIME 20
+/*
+ * Factor by which to multiply number of online CPUs for total number of
+ * worker threads
+ */
+#define THREAD_FACTOR 8
+
+/*
+ * Ensure there is twice the number of non-volatile VMX regs!
+ * check_vmx() is going to use the other half as space to put the live
+ * registers before calling vsx_memcmp()
+ */
+__thread vector int varray[24] = {
+	{1, 2, 3, 4 }, {5, 6, 7, 8 }, {9, 10,11,12},
+	{13,14,15,16}, {17,18,19,20}, {21,22,23,24},
+	{25,26,27,28}, {29,30,31,32}, {33,34,35,36},
+	{37,38,39,40}, {41,42,43,44}, {45,46,47,48}
+};
+
+int threads_starting;
+int running;
+
+extern long preempt_vsx(vector int *varray, int *threads_starting, int *running);
+
+long vsx_memcmp(vector int *a) {
+	vector int zero = {0, 0, 0, 0};
+	int i;
+
+	FAIL_IF(a != varray);
+
+	for(i = 0; i < 12; i++) {
+		if (memcmp(&a[i + 12], &zero, sizeof(vector int)) == 0) {
+			fprintf(stderr, "Detected zero from the VSX reg %d\n", i + 12);
+			return 2;
+		}
+	}
+
+	if (memcmp(a, &a[12], 12 * sizeof(vector int))) {
+		long *p = (long *)a;
+		fprintf(stderr, "VSX mismatch\n");
+		for (i = 0; i < 24; i=i+2)
+			fprintf(stderr, "%d: 0x%08lx%08lx | 0x%08lx%08lx\n",
+					i/2 + i%2 + 20, p[i], p[i + 1], p[i + 24], p[i + 25]);
+		return 1;
+	}
+	return 0;
+}
+
+void *preempt_vsx_c(void *p)
+{
+	int i, j;
+	long rc;
+	srand(pthread_self());
+	for (i = 0; i < 12; i++)
+		for (j = 0; j < 4; j++) {
+			varray[i][j] = rand();
+			/* Don't want zero because it hides kernel problems */
+			if (varray[i][j] == 0)
+				j--;
+		}
+	rc = preempt_vsx(varray, &threads_starting, &running);
+	if (rc == 2)
+		fprintf(stderr, "Caught zeros in VSX compares\n");
+	return (void *)rc;
+}
+
+int test_preempt_vsx(void)
+{
+	int i, rc, threads;
+	pthread_t *tids;
+
+	threads = sysconf(_SC_NPROCESSORS_ONLN) * THREAD_FACTOR;
+	tids = malloc(threads * sizeof(pthread_t));
+	FAIL_IF(!tids);
+
+	running = true;
+	threads_starting = threads;
+	for (i = 0; i < threads; i++) {
+		rc = pthread_create(&tids[i], NULL, preempt_vsx_c, NULL);
+		FAIL_IF(rc);
+	}
+
+	setbuf(stdout, NULL);
+	/* Not really nessesary but nice to wait for every thread to start */
+	printf("\tWaiting for %d workers to start...", threads_starting);
+	while(threads_starting)
+		asm volatile("": : :"memory");
+	printf("done\n");
+
+	printf("\tWaiting for %d seconds to let some workers get preempted...", PREEMPT_TIME);
+	sleep(PREEMPT_TIME);
+	printf("done\n");
+
+	printf("\tStopping workers...");
+	/*
+	 * Working are checking this value every loop. In preempt_vsx 'cmpwi r5,0; bne 2b'.
+	 * r5 will have loaded the value of running.
+	 */
+	running = 0;
+	for (i = 0; i < threads; i++) {
+		void *rc_p;
+		pthread_join(tids[i], &rc_p);
+
+		/*
+		 * Harness will say the fail was here, look at why preempt_vsx
+		 * returned
+		 */
+		if ((long) rc_p)
+			printf("oops\n");
+		FAIL_IF((long) rc_p);
+	}
+	printf("done\n");
+
+	return 0;
+}
+
+int main(int argc, char *argv[])
+{
+	return test_harness(test_preempt_vsx, "vsx_preempt");
+}
diff --git a/tools/testing/selftests/powerpc/signal/Makefile b/tools/testing/selftests/powerpc/signal/Makefile
new file mode 100644
index 0000000..f0eef27
--- /dev/null
+++ b/tools/testing/selftests/powerpc/signal/Makefile
@@ -0,0 +1,13 @@
+TEST_PROGS := signal signal_tm
+
+all: $(TEST_PROGS)
+
+$(TEST_PROGS): ../harness.c ../utils.c signal.S
+
+CFLAGS += -maltivec
+signal_tm: CFLAGS += -mhtm
+
+include ../../lib.mk
+
+clean:
+	rm -f $(TEST_PROGS) *.o
diff --git a/tools/testing/selftests/powerpc/signal/signal.S b/tools/testing/selftests/powerpc/signal/signal.S
new file mode 100644
index 0000000..7043d52
--- /dev/null
+++ b/tools/testing/selftests/powerpc/signal/signal.S
@@ -0,0 +1,50 @@
+/*
+ * Copyright 2015, Cyril Bur, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include "../basic_asm.h"
+
+/* long signal_self(pid_t pid, int sig); */
+FUNC_START(signal_self)
+	li	r0,37 /* sys_kill */
+	/* r3 already has our pid in it */
+	/* r4 already has signal type in it */
+	sc
+	bc	4,3,1f
+	subfze	r3,r3
+1:	blr
+FUNC_END(signal_self)
+
+/* long tm_signal_self(pid_t pid, int sig, int *ret); */
+FUNC_START(tm_signal_self)
+	PUSH_BASIC_STACK(8)
+	std	r5,STACK_FRAME_PARAM(0)(sp) /* ret */
+	tbegin.
+	beq	1f
+	tsuspend.
+	li	r0,37 /* sys_kill */
+	/* r3 already has our pid in it */
+	/* r4 already has signal type in it */
+	sc
+	ld	r5,STACK_FRAME_PARAM(0)(sp) /* ret */
+	bc	4,3,2f
+	subfze	r3,r3
+2:	std	r3,0(r5)
+	tabort. 0
+	tresume. /* Be nice to some cleanup, jumps back to tbegin then to 1: */
+	/*
+	 * Transaction should be proper doomed and we should never get
+	 * here
+	 */
+	li	r3,1
+	POP_BASIC_STACK(8)
+	blr
+1:	li	r3,0
+	POP_BASIC_STACK(8)
+	blr
+FUNC_END(tm_signal_self)
diff --git a/tools/testing/selftests/powerpc/signal/signal.c b/tools/testing/selftests/powerpc/signal/signal.c
new file mode 100644
index 0000000..e7dedd2
--- /dev/null
+++ b/tools/testing/selftests/powerpc/signal/signal.c
@@ -0,0 +1,111 @@
+/*
+ * Copyright 2016, Cyril Bur, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Sending one self a signal should always get delivered.
+ */
+
+#include <signal.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/types.h>
+#include <sys/wait.h>
+#include <unistd.h>
+
+#include <altivec.h>
+
+#include "utils.h"
+
+#define MAX_ATTEMPT 500000
+#define TIMEOUT 5
+
+extern long signal_self(pid_t pid, int sig);
+
+static sig_atomic_t signaled;
+static sig_atomic_t fail;
+
+static void signal_handler(int sig)
+{
+	if (sig == SIGUSR1)
+		signaled = 1;
+	else
+		fail = 1;
+}
+
+static int test_signal()
+{
+	int i;
+	struct sigaction act;
+	pid_t ppid = getpid();
+	pid_t pid;
+
+	act.sa_handler = signal_handler;
+	act.sa_flags = 0;
+	sigemptyset(&act.sa_mask);
+	if (sigaction(SIGUSR1, &act, NULL) < 0) {
+		perror("sigaction SIGUSR1");
+		exit(1);
+	}
+	if (sigaction(SIGALRM, &act, NULL) < 0) {
+		perror("sigaction SIGALRM");
+		exit(1);
+	}
+
+	/* Don't do this for MAX_ATTEMPT, its simply too long */
+	for(i  = 0; i < 1000; i++) {
+		pid = fork();
+		if (pid == -1) {
+			perror("fork");
+			exit(1);
+		}
+		if (pid == 0) {
+			signal_self(ppid, SIGUSR1);
+			exit(1);
+		} else {
+			alarm(0); /* Disable any pending */
+			alarm(2);
+			while (!signaled && !fail)
+				asm volatile("": : :"memory");
+			if (!signaled) {
+				fprintf(stderr, "Didn't get signal from child\n");
+				FAIL_IF(1); /* For the line number */
+			}
+			/* Otherwise we'll loop too fast and fork() will eventually fail */
+			waitpid(pid, NULL, 0);
+		}
+	}
+
+	for (i = 0; i < MAX_ATTEMPT; i++) {
+		long rc;
+
+		alarm(0); /* Disable any pending */
+		signaled = 0;
+		alarm(TIMEOUT);
+		rc = signal_self(ppid, SIGUSR1);
+		if (rc) {
+			fprintf(stderr, "(%d) Fail reason: %d rc=0x%lx",
+					i, fail, rc);
+			FAIL_IF(1); /* For the line number */
+		}
+		while (!signaled && !fail)
+			asm volatile("": : :"memory");
+		if (!signaled) {
+			fprintf(stderr, "(%d) Fail reason: %d rc=0x%lx",
+					i, fail, rc);
+			FAIL_IF(1); /* For the line number */
+		}
+	}
+
+	return 0;
+}
+
+int main(void)
+{
+	test_harness_set_timeout(300);
+	return test_harness(test_signal, "signal");
+}
diff --git a/tools/testing/selftests/powerpc/signal/signal_tm.c b/tools/testing/selftests/powerpc/signal/signal_tm.c
new file mode 100644
index 0000000..2e7451a
--- /dev/null
+++ b/tools/testing/selftests/powerpc/signal/signal_tm.c
@@ -0,0 +1,110 @@
+/*
+ * Copyright 2016, Cyril Bur, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Sending one self a signal should always get delivered.
+ */
+
+#include <errno.h>
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+#include <signal.h>
+#include <unistd.h>
+
+#include <altivec.h>
+
+#include "utils.h"
+#include "../tm/tm.h"
+
+#define MAX_ATTEMPT 500000
+#define TIMEOUT 10
+
+extern long tm_signal_self(pid_t pid, int sig, long *ret);
+
+static sig_atomic_t signaled;
+static sig_atomic_t fail;
+
+static void signal_handler(int sig)
+{
+	if (tcheck_active()) {
+		fail = 2;
+		return;
+	}
+
+	if (sig == SIGUSR1)
+		signaled = 1;
+	else
+		fail = 1;
+}
+
+static int test_signal_tm()
+{
+	int i;
+	struct sigaction act;
+
+	act.sa_handler = signal_handler;
+	act.sa_flags = 0;
+	sigemptyset(&act.sa_mask);
+	if (sigaction(SIGUSR1, &act, NULL) < 0) {
+		perror("sigaction SIGUSR1");
+		exit(1);
+	}
+	if (sigaction(SIGALRM, &act, NULL) < 0) {
+		perror("sigaction SIGALRM");
+		exit(1);
+	}
+
+	SKIP_IF(!have_htm());
+
+	for (i = 0; i < MAX_ATTEMPT; i++) {
+		/*
+		 * If anything bad happens in ASM and we fail to set ret
+		 * because *handwave* TM this will cause failure
+		 */
+		long ret = 0xdead;
+		long rc = 0xbeef;
+
+		alarm(0); /* Disable any pending */
+		signaled = 0;
+		alarm(TIMEOUT);
+		FAIL_IF(tcheck_transactional());
+		rc = tm_signal_self(getpid(), SIGUSR1, &ret);
+		if (ret == 0xdead)
+			/*
+			 * This basically means the transaction aborted before we
+			 * even got to the suspend... this is crazy but it
+			 * happens.
+			 * Yes this also means we might never make forward
+			 * progress... the alarm() will trip eventually...
+			 */
+			continue;
+
+		if (rc || ret) {
+			/* Ret is actually an errno */
+			printf("TEXASR 0x%016lx, TFIAR 0x%016lx\n",
+					__builtin_get_texasr(), __builtin_get_tfiar());
+			fprintf(stderr, "(%d) Fail reason: %d rc=0x%lx ret=0x%lx\n",
+					i, fail, rc, ret);
+			FAIL_IF(ret);
+		}
+		while(!signaled && !fail)
+			asm volatile("": : :"memory");
+		if (!signaled) {
+			fprintf(stderr, "(%d) Fail reason: %d rc=0x%lx ret=0x%lx\n",
+					i, fail, rc, ret);
+			FAIL_IF(fail); /* For the line number */
+		}
+	}
+
+	return 0;
+}
+
+int main(void)
+{
+	return test_harness(test_signal_tm, "signal_tm");
+}
diff --git a/tools/testing/selftests/powerpc/tm/Makefile b/tools/testing/selftests/powerpc/tm/Makefile
index 9d301d7..c6c53c8 100644
--- a/tools/testing/selftests/powerpc/tm/Makefile
+++ b/tools/testing/selftests/powerpc/tm/Makefile
@@ -1,5 +1,8 @@
+SIGNAL_CONTEXT_CHK_TESTS := tm-signal-context-chk-gpr tm-signal-context-chk-fpu \
+	tm-signal-context-chk-vmx tm-signal-context-chk-vsx
+
 TEST_PROGS := tm-resched-dscr tm-syscall tm-signal-msr-resv tm-signal-stack \
-	tm-vmxcopy tm-fork tm-tar tm-tmspr tm-exec tm-execed
+	tm-vmxcopy tm-fork tm-tar tm-tmspr $(SIGNAL_CONTEXT_CHK_TESTS)
 
 all: $(TEST_PROGS)
 
@@ -11,6 +14,9 @@
 tm-syscall: CFLAGS += -I../../../../../usr/include
 tm-tmspr: CFLAGS += -pthread
 
+$(SIGNAL_CONTEXT_CHK_TESTS): tm-signal.S
+$(SIGNAL_CONTEXT_CHK_TESTS): CFLAGS += -mhtm -m64 -mvsx
+
 include ../../lib.mk
 
 clean:
diff --git a/tools/testing/selftests/powerpc/tm/tm-signal-context-chk-fpu.c b/tools/testing/selftests/powerpc/tm/tm-signal-context-chk-fpu.c
new file mode 100644
index 0000000..c760deb
--- /dev/null
+++ b/tools/testing/selftests/powerpc/tm/tm-signal-context-chk-fpu.c
@@ -0,0 +1,92 @@
+/*
+ * Copyright 2016, Cyril Bur, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ *
+ * Test the kernel's signal frame code.
+ *
+ * The kernel sets up two sets of ucontexts if the signal was to be
+ * delivered while the thread was in a transaction.
+ * Expected behaviour is that the checkpointed state is in the user
+ * context passed to the signal handler. The speculated state can be
+ * accessed with the uc_link pointer.
+ *
+ * The rationale for this is that if TM unaware code (which linked
+ * against TM libs) installs a signal handler it will not know of the
+ * speculative nature of the 'live' registers and may infer the wrong
+ * thing.
+ */
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <signal.h>
+#include <unistd.h>
+
+#include <altivec.h>
+
+#include "utils.h"
+#include "tm.h"
+
+#define MAX_ATTEMPT 500000
+
+#define NV_FPU_REGS 18
+
+long tm_signal_self_context_load(pid_t pid, long *gprs, double *fps, vector int *vms, vector int *vss);
+
+/* Be sure there are 2x as many as there are NV FPU regs (2x18) */
+static double fps[] = {
+	 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18,
+	-1,-2,-3,-4,-5,-6,-7,-8,-9,-10,-11,-12,-13,-14,-15,-16,-17,-18
+};
+
+static sig_atomic_t fail;
+
+static void signal_usr1(int signum, siginfo_t *info, void *uc)
+{
+	int i;
+	ucontext_t *ucp = uc;
+	ucontext_t *tm_ucp = ucp->uc_link;
+
+	for (i = 0; i < NV_FPU_REGS && !fail; i++) {
+		fail = (ucp->uc_mcontext.fp_regs[i + 14] != fps[i]);
+		fail |= (tm_ucp->uc_mcontext.fp_regs[i + 14] != fps[i + NV_FPU_REGS]);
+		if (fail)
+			printf("Failed on %d FP %g or %g\n", i, ucp->uc_mcontext.fp_regs[i + 14], tm_ucp->uc_mcontext.fp_regs[i + 14]);
+	}
+}
+
+static int tm_signal_context_chk_fpu()
+{
+	struct sigaction act;
+	int i;
+	long rc;
+	pid_t pid = getpid();
+
+	SKIP_IF(!have_htm());
+
+	act.sa_sigaction = signal_usr1;
+	sigemptyset(&act.sa_mask);
+	act.sa_flags = SA_SIGINFO;
+	if (sigaction(SIGUSR1, &act, NULL) < 0) {
+		perror("sigaction sigusr1");
+		exit(1);
+	}
+
+	i = 0;
+	while (i < MAX_ATTEMPT && !fail) {
+		rc = tm_signal_self_context_load(pid, NULL, fps, NULL, NULL);
+		FAIL_IF(rc != pid);
+		i++;
+	}
+
+	return fail;
+}
+
+int main(void)
+{
+	return test_harness(tm_signal_context_chk_fpu, "tm_signal_context_chk_fpu");
+}
diff --git a/tools/testing/selftests/powerpc/tm/tm-signal-context-chk-gpr.c b/tools/testing/selftests/powerpc/tm/tm-signal-context-chk-gpr.c
new file mode 100644
index 0000000..df91330
--- /dev/null
+++ b/tools/testing/selftests/powerpc/tm/tm-signal-context-chk-gpr.c
@@ -0,0 +1,90 @@
+/*
+ * Copyright 2016, Cyril Bur, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ *
+ * Test the kernel's signal frame code.
+ *
+ * The kernel sets up two sets of ucontexts if the signal was to be
+ * delivered while the thread was in a transaction.
+ * Expected behaviour is that the checkpointed state is in the user
+ * context passed to the signal handler. The speculated state can be
+ * accessed with the uc_link pointer.
+ *
+ * The rationale for this is that if TM unaware code (which linked
+ * against TM libs) installs a signal handler it will not know of the
+ * speculative nature of the 'live' registers and may infer the wrong
+ * thing.
+ */
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <signal.h>
+#include <unistd.h>
+
+#include <altivec.h>
+
+#include "utils.h"
+#include "tm.h"
+
+#define MAX_ATTEMPT 500000
+
+#define NV_GPR_REGS 18
+
+long tm_signal_self_context_load(pid_t pid, long *gprs, double *fps, vector int *vms, vector int *vss);
+
+static sig_atomic_t fail;
+
+static long gps[] = { 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18,
+					 -1,-2,-3,-4,-5,-6,-7,-8,-9,-10,-11,-12,-13,-14,-15,-16,-17,-18};
+
+static void signal_usr1(int signum, siginfo_t *info, void *uc)
+{
+	int i;
+	ucontext_t *ucp = uc;
+	ucontext_t *tm_ucp = ucp->uc_link;
+
+	for (i = 0; i < NV_GPR_REGS && !fail; i++) {
+		fail = (ucp->uc_mcontext.gp_regs[i + 14] != gps[i]);
+		fail |= (tm_ucp->uc_mcontext.gp_regs[i + 14] != gps[i + NV_GPR_REGS]);
+		if (fail)
+			printf("Failed on %d GPR %lu or %lu\n", i,
+					ucp->uc_mcontext.gp_regs[i + 14], tm_ucp->uc_mcontext.gp_regs[i + 14]);
+	}
+}
+
+static int tm_signal_context_chk_gpr()
+{
+	struct sigaction act;
+	int i;
+	long rc;
+	pid_t pid = getpid();
+
+	SKIP_IF(!have_htm());
+
+	act.sa_sigaction = signal_usr1;
+	sigemptyset(&act.sa_mask);
+	act.sa_flags = SA_SIGINFO;
+	if (sigaction(SIGUSR1, &act, NULL) < 0) {
+		perror("sigaction sigusr1");
+		exit(1);
+	}
+
+	i = 0;
+	while (i < MAX_ATTEMPT && !fail) {
+		rc = tm_signal_self_context_load(pid, gps, NULL, NULL, NULL);
+		FAIL_IF(rc != pid);
+		i++;
+	}
+
+	return fail;
+}
+
+int main(void)
+{
+	return test_harness(tm_signal_context_chk_gpr, "tm_signal_context_chk_gpr");
+}
diff --git a/tools/testing/selftests/powerpc/tm/tm-signal-context-chk-vmx.c b/tools/testing/selftests/powerpc/tm/tm-signal-context-chk-vmx.c
new file mode 100644
index 0000000..f0ee55f
--- /dev/null
+++ b/tools/testing/selftests/powerpc/tm/tm-signal-context-chk-vmx.c
@@ -0,0 +1,110 @@
+/*
+ * Copyright 2016, Cyril Bur, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ *
+ * Test the kernel's signal frame code.
+ *
+ * The kernel sets up two sets of ucontexts if the signal was to be
+ * delivered while the thread was in a transaction.
+ * Expected behaviour is that the checkpointed state is in the user
+ * context passed to the signal handler. The speculated state can be
+ * accessed with the uc_link pointer.
+ *
+ * The rationale for this is that if TM unaware code (which linked
+ * against TM libs) installs a signal handler it will not know of the
+ * speculative nature of the 'live' registers and may infer the wrong
+ * thing.
+ */
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+#include <signal.h>
+#include <unistd.h>
+
+#include <altivec.h>
+
+#include "utils.h"
+#include "tm.h"
+
+#define MAX_ATTEMPT 500000
+
+#define NV_VMX_REGS 12
+
+long tm_signal_self_context_load(pid_t pid, long *gprs, double *fps, vector int *vms, vector int *vss);
+
+static sig_atomic_t fail;
+
+vector int vms[] = {
+	{1, 2, 3, 4 },{5, 6, 7, 8 },{9, 10,11,12},
+	{13,14,15,16},{17,18,19,20},{21,22,23,24},
+	{25,26,27,28},{29,30,31,32},{33,34,35,36},
+	{37,38,39,40},{41,42,43,44},{45,46,47,48},
+	{-1, -2, -3, -4}, {-5, -6, -7, -8}, {-9, -10,-11,-12},
+	{-13,-14,-15,-16},{-17,-18,-19,-20},{-21,-22,-23,-24},
+	{-25,-26,-27,-28},{-29,-30,-31,-32},{-33,-34,-35,-36},
+	{-37,-38,-39,-40},{-41,-42,-43,-44},{-45,-46,-47,-48}
+};
+
+static void signal_usr1(int signum, siginfo_t *info, void *uc)
+{
+	int i;
+	ucontext_t *ucp = uc;
+	ucontext_t *tm_ucp = ucp->uc_link;
+
+	for (i = 0; i < NV_VMX_REGS && !fail; i++) {
+		fail = memcmp(ucp->uc_mcontext.v_regs->vrregs[i + 20],
+				&vms[i], sizeof(vector int));
+		fail |= memcmp(tm_ucp->uc_mcontext.v_regs->vrregs[i + 20],
+				&vms[i + NV_VMX_REGS], sizeof (vector int));
+
+		if (fail) {
+			int j;
+
+			fprintf(stderr, "Failed on %d vmx 0x", i);
+			for (j = 0; j < 4; j++)
+				fprintf(stderr, "%04x", ucp->uc_mcontext.v_regs->vrregs[i + 20][j]);
+			fprintf(stderr, " vs 0x");
+			for (j = 0 ; j < 4; j++)
+				fprintf(stderr, "%04x", tm_ucp->uc_mcontext.v_regs->vrregs[i + 20][j]);
+			fprintf(stderr, "\n");
+		}
+	}
+}
+
+static int tm_signal_context_chk()
+{
+	struct sigaction act;
+	int i;
+	long rc;
+	pid_t pid = getpid();
+
+	SKIP_IF(!have_htm());
+
+	act.sa_sigaction = signal_usr1;
+	sigemptyset(&act.sa_mask);
+	act.sa_flags = SA_SIGINFO;
+	if (sigaction(SIGUSR1, &act, NULL) < 0) {
+		perror("sigaction sigusr1");
+		exit(1);
+	}
+
+	i = 0;
+	while (i < MAX_ATTEMPT && !fail) {
+		rc = tm_signal_self_context_load(pid, NULL, NULL, vms, NULL);
+		FAIL_IF(rc != pid);
+		i++;
+	}
+
+	return fail;
+}
+
+int main(void)
+{
+	return test_harness(tm_signal_context_chk, "tm_signal_context_chk_vmx");
+}
diff --git a/tools/testing/selftests/powerpc/tm/tm-signal-context-chk-vsx.c b/tools/testing/selftests/powerpc/tm/tm-signal-context-chk-vsx.c
new file mode 100644
index 0000000..b99c3d8
--- /dev/null
+++ b/tools/testing/selftests/powerpc/tm/tm-signal-context-chk-vsx.c
@@ -0,0 +1,125 @@
+/*
+ * Copyright 2016, Cyril Bur, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ *
+ * Test the kernel's signal frame code.
+ *
+ * The kernel sets up two sets of ucontexts if the signal was to be
+ * delivered while the thread was in a transaction.
+ * Expected behaviour is that the checkpointed state is in the user
+ * context passed to the signal handler. The speculated state can be
+ * accessed with the uc_link pointer.
+ *
+ * The rationale for this is that if TM unaware code (which linked
+ * against TM libs) installs a signal handler it will not know of the
+ * speculative nature of the 'live' registers and may infer the wrong
+ * thing.
+ */
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+#include <signal.h>
+#include <unistd.h>
+
+#include <altivec.h>
+
+#include "utils.h"
+#include "tm.h"
+
+#define MAX_ATTEMPT 500000
+
+#define NV_VSX_REGS 12
+
+long tm_signal_self_context_load(pid_t pid, long *gprs, double *fps, vector int *vms, vector int *vss);
+
+static sig_atomic_t fail;
+
+vector int vss[] = {
+	{1, 2, 3, 4 },{5, 6, 7, 8 },{9, 10,11,12},
+	{13,14,15,16},{17,18,19,20},{21,22,23,24},
+	{25,26,27,28},{29,30,31,32},{33,34,35,36},
+	{37,38,39,40},{41,42,43,44},{45,46,47,48},
+	{-1, -2, -3, -4 },{-5, -6, -7, -8 },{-9, -10,-11,-12},
+	{-13,-14,-15,-16},{-17,-18,-19,-20},{-21,-22,-23,-24},
+	{-25,-26,-27,-28},{-29,-30,-31,-32},{-33,-34,-35,-36},
+	{-37,-38,-39,-40},{-41,-42,-43,-44},{-45,-46,-47,-48}
+};
+
+static void signal_usr1(int signum, siginfo_t *info, void *uc)
+{
+	int i;
+	uint8_t vsc[sizeof(vector int)];
+	uint8_t vst[sizeof(vector int)];
+	ucontext_t *ucp = uc;
+	ucontext_t *tm_ucp = ucp->uc_link;
+
+	/*
+	 * The other half of the VSX regs will be after v_regs.
+	 *
+	 * In short, vmx_reserve array holds everything. v_regs is a 16
+	 * byte aligned pointer at the start of vmx_reserve (vmx_reserve
+	 * may or may not be 16 aligned) where the v_regs structure exists.
+	 * (half of) The VSX regsters are directly after v_regs so the
+	 * easiest way to find them below.
+	 */
+	long *vsx_ptr = (long *)(ucp->uc_mcontext.v_regs + 1);
+	long *tm_vsx_ptr = (long *)(tm_ucp->uc_mcontext.v_regs + 1);
+	for (i = 0; i < NV_VSX_REGS && !fail; i++) {
+		memcpy(vsc, &ucp->uc_mcontext.fp_regs[i + 20], 8);
+		memcpy(vsc + 8, &vsx_ptr[20 + i], 8);
+		fail = memcmp(vsc, &vss[i], sizeof(vector int));
+		memcpy(vst, &tm_ucp->uc_mcontext.fp_regs[i + 20], 8);
+		memcpy(vst + 8, &tm_vsx_ptr[20 + i], 8);
+		fail |= memcmp(vst, &vss[i + NV_VSX_REGS], sizeof(vector int));
+
+		if (fail) {
+			int j;
+
+			fprintf(stderr, "Failed on %d vsx 0x", i);
+			for (j = 0; j < 16; j++)
+				fprintf(stderr, "%02x", vsc[j]);
+			fprintf(stderr, " vs 0x");
+			for (j = 0; j < 16; j++)
+				fprintf(stderr, "%02x", vst[j]);
+			fprintf(stderr, "\n");
+		}
+	}
+}
+
+static int tm_signal_context_chk()
+{
+	struct sigaction act;
+	int i;
+	long rc;
+	pid_t pid = getpid();
+
+	SKIP_IF(!have_htm());
+
+	act.sa_sigaction = signal_usr1;
+	sigemptyset(&act.sa_mask);
+	act.sa_flags = SA_SIGINFO;
+	if (sigaction(SIGUSR1, &act, NULL) < 0) {
+		perror("sigaction sigusr1");
+		exit(1);
+	}
+
+	i = 0;
+	while (i < MAX_ATTEMPT && !fail) {
+		rc = tm_signal_self_context_load(pid, NULL, NULL, NULL, vss);
+		FAIL_IF(rc != pid);
+		i++;
+	}
+
+	return fail;
+}
+
+int main(void)
+{
+	return test_harness(tm_signal_context_chk, "tm_signal_context_chk_vsx");
+}
diff --git a/tools/testing/selftests/powerpc/tm/tm-signal.S b/tools/testing/selftests/powerpc/tm/tm-signal.S
new file mode 100644
index 0000000..4e13e8b
--- /dev/null
+++ b/tools/testing/selftests/powerpc/tm/tm-signal.S
@@ -0,0 +1,114 @@
+/*
+ * Copyright 2015, Cyril Bur, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include "../basic_asm.h"
+#include "../gpr_asm.h"
+#include "../fpu_asm.h"
+#include "../vmx_asm.h"
+#include "../vsx_asm.h"
+
+/*
+ * Large caveat here being that the caller cannot expect the
+ * signal to always be sent! The hardware can (AND WILL!) abort
+ * the transaction between the tbegin and the tsuspend (however
+ * unlikely it seems or infrequently it actually happens).
+ * You have been warned.
+ */
+/* long tm_signal_self(pid_t pid, long *gprs, double *fps, vector *vms, vector *vss); */
+FUNC_START(tm_signal_self_context_load)
+	PUSH_BASIC_STACK(512)
+	/*
+	 * Don't strictly need to save and restore as it depends on if
+	 * we're going to use them, however this reduces messy logic
+	 */
+	PUSH_VMX(STACK_FRAME_LOCAL(5,0),r8)
+	PUSH_FPU(512)
+	PUSH_NVREGS_BELOW_FPU(512)
+	std r3, STACK_FRAME_PARAM(0)(sp) /* pid */
+	std r4, STACK_FRAME_PARAM(1)(sp) /* gps */
+	std r5, STACK_FRAME_PARAM(2)(sp) /* fps */
+	std r6, STACK_FRAME_PARAM(3)(sp) /* vms */
+	std r7, STACK_FRAME_PARAM(4)(sp) /* vss */
+
+	ld r3, STACK_FRAME_PARAM(1)(sp)
+	cmpdi r3, 0
+	beq skip_gpr_lc
+	bl load_gpr
+skip_gpr_lc:
+	ld r3, STACK_FRAME_PARAM(2)(sp)
+	cmpdi	r3, 0
+	beq	skip_fpu_lc
+	bl load_fpu
+skip_fpu_lc:
+	ld r3, STACK_FRAME_PARAM(3)(sp)
+	cmpdi r3, 0
+	beq	skip_vmx_lc
+	bl load_vmx
+skip_vmx_lc:
+	ld r3, STACK_FRAME_PARAM(4)(sp)
+	cmpdi	r3, 0
+	beq	skip_vsx_lc
+	bl load_vsx
+skip_vsx_lc:
+	/*
+	 * Set r3 (return value) before tbegin. Use the pid as a known
+	 * 'all good' return value, zero is used to indicate a non-doomed
+	 * transaction.
+	 */
+	ld	r3, STACK_FRAME_PARAM(0)(sp)
+	tbegin.
+	beq	1f
+	tsuspend. /* Can't enter a syscall transactionally */
+	ld	r3, STACK_FRAME_PARAM(1)(sp)
+	cmpdi	r3, 0
+	beq skip_gpr_lt
+	/* Get the second half of the array */
+	addi	r3, r3, 8 * 18
+	bl load_gpr
+skip_gpr_lt:
+	ld r3, STACK_FRAME_PARAM(2)(sp)
+	cmpdi	r3, 0
+	beq	skip_fpu_lt
+	/* Get the second half of the array */
+	addi	r3, r3, 8 * 18
+	bl load_fpu
+skip_fpu_lt:
+	ld r3, STACK_FRAME_PARAM(3)(sp)
+	cmpdi r3, 0
+	beq	skip_vmx_lt
+	/* Get the second half of the array */
+	addi	r3, r3, 16 * 12
+	bl load_vmx
+skip_vmx_lt:
+	ld r3, STACK_FRAME_PARAM(4)(sp)
+	cmpdi	r3, 0
+	beq	skip_vsx_lt
+	/* Get the second half of the array */
+	addi	r3, r3, 16 * 12
+	bl load_vsx
+skip_vsx_lt:
+	li	r0, 37 /* sys_kill */
+	ld r3, STACK_FRAME_PARAM(0)(sp) /* pid */
+	li r4, 10 /* SIGUSR1 */
+	sc /* Taking the signal will doom the transaction */
+	tabort. 0
+	tresume. /* Be super sure we abort */
+	/*
+	 * This will cause us to resume doomed transaction and cause
+	 * hardware to cleanup, we'll end up at 1: anything between
+	 * tresume. and 1: shouldn't ever run.
+	 */
+	li r3, 0
+	1:
+	POP_VMX(STACK_FRAME_LOCAL(5,0),r4)
+	POP_FPU(512)
+	POP_NVREGS_BELOW_FPU(512)
+	POP_BASIC_STACK(512)
+	blr
+FUNC_END(tm_signal_self_context_load)
diff --git a/tools/testing/selftests/powerpc/tm/tm.h b/tools/testing/selftests/powerpc/tm/tm.h
index 60318ba..2c8da74 100644
--- a/tools/testing/selftests/powerpc/tm/tm.h
+++ b/tools/testing/selftests/powerpc/tm/tm.h
@@ -52,4 +52,31 @@
 	return (__builtin_get_texasru() & 0x400000);
 }
 
+static inline int tcheck(void)
+{
+	long cr;
+	asm volatile ("tcheck 0" : "=r"(cr) : : "cr0");
+	return (cr >> 28) & 4;
+}
+
+static inline bool tcheck_doomed(void)
+{
+	return tcheck() & 8;
+}
+
+static inline bool tcheck_active(void)
+{
+	return tcheck() & 4;
+}
+
+static inline bool tcheck_suspended(void)
+{
+	return tcheck() & 2;
+}
+
+static inline bool tcheck_transactional(void)
+{
+	return tcheck() & 6;
+}
+
 #endif /* _SELFTESTS_POWERPC_TM_TM_H */
diff --git a/tools/testing/selftests/powerpc/utils.h b/tools/testing/selftests/powerpc/utils.h
index fbd33e5..53405e8 100644
--- a/tools/testing/selftests/powerpc/utils.h
+++ b/tools/testing/selftests/powerpc/utils.h
@@ -22,7 +22,7 @@
 typedef uint16_t u16;
 typedef uint8_t u8;
 
-
+void test_harness_set_timeout(uint64_t time);
 int test_harness(int (test_function)(void), char *name);
 extern void *get_auxv_entry(int type);
 int pick_online_cpu(void);
@@ -32,10 +32,17 @@
 	return ((unsigned long)get_auxv_entry(AT_HWCAP) & ftr) == ftr;
 }
 
+#ifdef AT_HWCAP2
 static inline bool have_hwcap2(unsigned long ftr2)
 {
 	return ((unsigned long)get_auxv_entry(AT_HWCAP2) & ftr2) == ftr2;
 }
+#else
+static inline bool have_hwcap2(unsigned long ftr2)
+{
+	return false;
+}
+#endif
 
 /* Yes, this is evil */
 #define FAIL_IF(x)						\
diff --git a/tools/testing/selftests/powerpc/vmx_asm.h b/tools/testing/selftests/powerpc/vmx_asm.h
new file mode 100644
index 0000000..2eaaeca
--- /dev/null
+++ b/tools/testing/selftests/powerpc/vmx_asm.h
@@ -0,0 +1,96 @@
+/*
+ * Copyright 2015, Cyril Bur, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include "basic_asm.h"
+
+/* POS MUST BE 16 ALIGNED! */
+#define PUSH_VMX(pos,reg) \
+	li	reg,pos; \
+	stvx	v20,reg,%r1; \
+	addi	reg,reg,16; \
+	stvx	v21,reg,%r1; \
+	addi	reg,reg,16; \
+	stvx	v22,reg,%r1; \
+	addi	reg,reg,16; \
+	stvx	v23,reg,%r1; \
+	addi	reg,reg,16; \
+	stvx	v24,reg,%r1; \
+	addi	reg,reg,16; \
+	stvx	v25,reg,%r1; \
+	addi	reg,reg,16; \
+	stvx	v26,reg,%r1; \
+	addi	reg,reg,16; \
+	stvx	v27,reg,%r1; \
+	addi	reg,reg,16; \
+	stvx	v28,reg,%r1; \
+	addi	reg,reg,16; \
+	stvx	v29,reg,%r1; \
+	addi	reg,reg,16; \
+	stvx	v30,reg,%r1; \
+	addi	reg,reg,16; \
+	stvx	v31,reg,%r1;
+
+/* POS MUST BE 16 ALIGNED! */
+#define POP_VMX(pos,reg) \
+	li	reg,pos; \
+	lvx	v20,reg,%r1; \
+	addi	reg,reg,16; \
+	lvx	v21,reg,%r1; \
+	addi	reg,reg,16; \
+	lvx	v22,reg,%r1; \
+	addi	reg,reg,16; \
+	lvx	v23,reg,%r1; \
+	addi	reg,reg,16; \
+	lvx	v24,reg,%r1; \
+	addi	reg,reg,16; \
+	lvx	v25,reg,%r1; \
+	addi	reg,reg,16; \
+	lvx	v26,reg,%r1; \
+	addi	reg,reg,16; \
+	lvx	v27,reg,%r1; \
+	addi	reg,reg,16; \
+	lvx	v28,reg,%r1; \
+	addi	reg,reg,16; \
+	lvx	v29,reg,%r1; \
+	addi	reg,reg,16; \
+	lvx	v30,reg,%r1; \
+	addi	reg,reg,16; \
+	lvx	v31,reg,%r1;
+
+/*
+ * Careful this will 'clobber' vmx (by design)
+ * Don't call this from C
+ */
+FUNC_START(load_vmx)
+	li	r5,0
+	lvx	v20,r5,r3
+	addi	r5,r5,16
+	lvx	v21,r5,r3
+	addi	r5,r5,16
+	lvx	v22,r5,r3
+	addi	r5,r5,16
+	lvx	v23,r5,r3
+	addi	r5,r5,16
+	lvx	v24,r5,r3
+	addi	r5,r5,16
+	lvx	v25,r5,r3
+	addi	r5,r5,16
+	lvx	v26,r5,r3
+	addi	r5,r5,16
+	lvx	v27,r5,r3
+	addi	r5,r5,16
+	lvx	v28,r5,r3
+	addi	r5,r5,16
+	lvx	v29,r5,r3
+	addi	r5,r5,16
+	lvx	v30,r5,r3
+	addi	r5,r5,16
+	lvx	v31,r5,r3
+	blr
+FUNC_END(load_vmx)
diff --git a/tools/testing/selftests/powerpc/vsx_asm.h b/tools/testing/selftests/powerpc/vsx_asm.h
new file mode 100644
index 0000000..d828bfb
--- /dev/null
+++ b/tools/testing/selftests/powerpc/vsx_asm.h
@@ -0,0 +1,71 @@
+/*
+ * Copyright 2015, Cyril Bur, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include "basic_asm.h"
+
+/*
+ * Careful this will 'clobber' vsx (by design), VSX are always
+ * volatile though so unlike vmx this isn't so much of an issue
+ * Still should avoid calling from C
+ */
+FUNC_START(load_vsx)
+	li	r5,0
+	lxvx	vs20,r5,r3
+	addi	r5,r5,16
+	lxvx	vs21,r5,r3
+	addi	r5,r5,16
+	lxvx	vs22,r5,r3
+	addi	r5,r5,16
+	lxvx	vs23,r5,r3
+	addi	r5,r5,16
+	lxvx	vs24,r5,r3
+	addi	r5,r5,16
+	lxvx	vs25,r5,r3
+	addi	r5,r5,16
+	lxvx	vs26,r5,r3
+	addi	r5,r5,16
+	lxvx	vs27,r5,r3
+	addi	r5,r5,16
+	lxvx	vs28,r5,r3
+	addi	r5,r5,16
+	lxvx	vs29,r5,r3
+	addi	r5,r5,16
+	lxvx	vs30,r5,r3
+	addi	r5,r5,16
+	lxvx	vs31,r5,r3
+	blr
+FUNC_END(load_vsx)
+
+FUNC_START(store_vsx)
+	li	r5,0
+	stxvx	vs20,r5,r3
+	addi	r5,r5,16
+	stxvx	vs21,r5,r3
+	addi	r5,r5,16
+	stxvx	vs22,r5,r3
+	addi	r5,r5,16
+	stxvx	vs23,r5,r3
+	addi	r5,r5,16
+	stxvx	vs24,r5,r3
+	addi	r5,r5,16
+	stxvx	vs25,r5,r3
+	addi	r5,r5,16
+	stxvx	vs26,r5,r3
+	addi	r5,r5,16
+	stxvx	vs27,r5,r3
+	addi	r5,r5,16
+	stxvx	vs28,r5,r3
+	addi	r5,r5,16
+	stxvx	vs29,r5,r3
+	addi	r5,r5,16
+	stxvx	vs30,r5,r3
+	addi	r5,r5,16
+	stxvx	vs31,r5,r3
+	blr
+FUNC_END(store_vsx)