ARM: 7954/1: mm: remove remaining domain support from ARMv6
CPU_32v6 currently selects CPU_USE_DOMAINS if CPU_V6 and MMU. This is
because ARM 1136 r0pX CPUs lack the v6k extensions, and therefore do
not have hardware thread registers. The lack of these registers requires
the kernel to update the vectors page at each context switch in order to
write a new TLS pointer. This write must be done via the userspace
mapping, since aliasing caches can lead to expensive flushing when using
kmap. Finally, this requires the vectors page to be mapped r/w for
kernel and r/o for user, which has implications for things like put_user
which must trigger CoW appropriately when targetting user pages.
The upshot of all this is that a v6/v7 kernel makes use of domains to
segregate kernel and user memory accesses. This has the nasty
side-effect of making device mappings executable, which has been
observed to cause subtle bugs on recent cores (e.g. Cortex-A15
performing a speculative instruction fetch from the GIC and acking an
interrupt in the process).
This patch solves this problem by removing the remaining domain support
from ARMv6. A new memory type is added specifically for the vectors page
which allows that page (and only that page) to be mapped as user r/o,
kernel r/w. All other user r/o pages are mapped also as kernel r/o.
Patch co-developed with Russell King.
Cc: <stable@vger.kernel.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
diff --git a/arch/arm/include/asm/futex.h b/arch/arm/include/asm/futex.h
index e42cf59..2aff798 100644
--- a/arch/arm/include/asm/futex.h
+++ b/arch/arm/include/asm/futex.h
@@ -3,11 +3,6 @@
#ifdef __KERNEL__
-#if defined(CONFIG_CPU_USE_DOMAINS) && defined(CONFIG_SMP)
-/* ARM doesn't provide unprivileged exclusive memory accessors */
-#include <asm-generic/futex.h>
-#else
-
#include <linux/futex.h>
#include <linux/uaccess.h>
#include <asm/errno.h>
@@ -164,6 +159,5 @@
return ret;
}
-#endif /* !(CPU_USE_DOMAINS && SMP) */
#endif /* __KERNEL__ */
#endif /* _ASM_ARM_FUTEX_H */
diff --git a/arch/arm/include/asm/pgtable-2level.h b/arch/arm/include/asm/pgtable-2level.h
index dfff709..219ac88 100644
--- a/arch/arm/include/asm/pgtable-2level.h
+++ b/arch/arm/include/asm/pgtable-2level.h
@@ -140,6 +140,7 @@
#define L_PTE_MT_DEV_NONSHARED (_AT(pteval_t, 0x0c) << 2) /* 1100 */
#define L_PTE_MT_DEV_WC (_AT(pteval_t, 0x09) << 2) /* 1001 */
#define L_PTE_MT_DEV_CACHED (_AT(pteval_t, 0x0b) << 2) /* 1011 */
+#define L_PTE_MT_VECTORS (_AT(pteval_t, 0x0f) << 2) /* 1111 */
#define L_PTE_MT_MASK (_AT(pteval_t, 0x0f) << 2)
#ifndef __ASSEMBLY__
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 1f8fed9..ca8ecde 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -446,7 +446,6 @@
config CPU_32v6
bool
- select CPU_USE_DOMAINS if CPU_V6 && MMU
select TLS_REG_EMUL if !CPU_32v6K && !MMU
config CPU_32v6K
@@ -671,7 +670,7 @@
config SWP_EMULATE
bool "Emulate SWP/SWPB instructions"
- depends on !CPU_USE_DOMAINS && CPU_V7
+ depends on CPU_V7
default y if SMP
select HAVE_PROC_CPU if PROC_FS
help
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index 4f08c13..6ec07a8 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -511,6 +511,16 @@
hyp_device_pgprot = s2_device_pgprot = mem_types[MT_DEVICE].prot_pte;
/*
+ * We don't use domains on ARMv6 (since this causes problems with
+ * v6/v7 kernels), so we must use a separate memory type for user
+ * r/o, kernel r/w to map the vectors page.
+ */
+#ifndef CONFIG_ARM_LPAE
+ if (cpu_arch == CPU_ARCH_ARMv6)
+ vecs_pgprot |= L_PTE_MT_VECTORS;
+#endif
+
+ /*
* ARMv6 and above have extended page tables.
*/
if (cpu_arch >= CPU_ARCH_ARMv6 && (cr & CR_XP)) {
diff --git a/arch/arm/mm/proc-macros.S b/arch/arm/mm/proc-macros.S
index e3c48a3..ee1d805 100644
--- a/arch/arm/mm/proc-macros.S
+++ b/arch/arm/mm/proc-macros.S
@@ -112,13 +112,9 @@
* 100x 1 0 1 r/o no acc
* 10x0 1 0 1 r/o no acc
* 1011 0 0 1 r/w no acc
- * 110x 0 1 0 r/w r/o
- * 11x0 0 1 0 r/w r/o
- * 1111 0 1 1 r/w r/w
- *
- * If !CONFIG_CPU_USE_DOMAINS, the following permissions are changed:
* 110x 1 1 1 r/o r/o
* 11x0 1 1 1 r/o r/o
+ * 1111 0 1 1 r/w r/w
*/
.macro armv6_mt_table pfx
\pfx\()_mt_table:
@@ -137,7 +133,7 @@
.long PTE_EXT_TEX(2) @ L_PTE_MT_DEV_NONSHARED
.long 0x00 @ unused
.long 0x00 @ unused
- .long 0x00 @ unused
+ .long PTE_CACHEABLE | PTE_BUFFERABLE | PTE_EXT_APX @ L_PTE_MT_VECTORS
.endm
.macro armv6_set_pte_ext pfx
@@ -158,24 +154,21 @@
tst r1, #L_PTE_USER
orrne r3, r3, #PTE_EXT_AP1
-#ifdef CONFIG_CPU_USE_DOMAINS
- @ allow kernel read/write access to read-only user pages
tstne r3, #PTE_EXT_APX
- bicne r3, r3, #PTE_EXT_APX | PTE_EXT_AP0
-#endif
+
+ @ user read-only -> kernel read-only
+ bicne r3, r3, #PTE_EXT_AP0
tst r1, #L_PTE_XN
orrne r3, r3, #PTE_EXT_XN
- orr r3, r3, r2
+ eor r3, r3, r2
tst r1, #L_PTE_YOUNG
tstne r1, #L_PTE_PRESENT
moveq r3, #0
-#ifndef CONFIG_CPU_USE_DOMAINS
tstne r1, #L_PTE_NONE
movne r3, #0
-#endif
str r3, [r0]
mcr p15, 0, r0, c7, c10, 1 @ flush_pte
diff --git a/arch/arm/mm/proc-v7-2level.S b/arch/arm/mm/proc-v7-2level.S
index bdd3be4..1f52915 100644
--- a/arch/arm/mm/proc-v7-2level.S
+++ b/arch/arm/mm/proc-v7-2level.S
@@ -90,21 +90,14 @@
tst r1, #L_PTE_USER
orrne r3, r3, #PTE_EXT_AP1
-#ifdef CONFIG_CPU_USE_DOMAINS
- @ allow kernel read/write access to read-only user pages
- tstne r3, #PTE_EXT_APX
- bicne r3, r3, #PTE_EXT_APX | PTE_EXT_AP0
-#endif
tst r1, #L_PTE_XN
orrne r3, r3, #PTE_EXT_XN
tst r1, #L_PTE_YOUNG
tstne r1, #L_PTE_VALID
-#ifndef CONFIG_CPU_USE_DOMAINS
eorne r1, r1, #L_PTE_NONE
tstne r1, #L_PTE_NONE
-#endif
moveq r3, #0
ARM( str r3, [r0, #2048]! )