| /* |
| * ipmi_msghandler.c |
| * |
| * Incoming and outgoing message routing for an IPMI interface. |
| * |
| * Author: MontaVista Software, Inc. |
| * Corey Minyard <minyard@mvista.com> |
| * source@mvista.com |
| * |
| * Copyright 2002 MontaVista Software Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| * |
| * |
| * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED |
| * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. |
| * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, |
| * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, |
| * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS |
| * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND |
| * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR |
| * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE |
| * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, write to the Free Software Foundation, Inc., |
| * 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/errno.h> |
| #include <asm/system.h> |
| #include <linux/sched.h> |
| #include <linux/poll.h> |
| #include <linux/spinlock.h> |
| #include <linux/mutex.h> |
| #include <linux/slab.h> |
| #include <linux/ipmi.h> |
| #include <linux/ipmi_smi.h> |
| #include <linux/notifier.h> |
| #include <linux/init.h> |
| #include <linux/proc_fs.h> |
| #include <linux/rcupdate.h> |
| |
| #define PFX "IPMI message handler: " |
| |
| #define IPMI_DRIVER_VERSION "39.1" |
| |
| static struct ipmi_recv_msg *ipmi_alloc_recv_msg(void); |
| static int ipmi_init_msghandler(void); |
| |
| static int initialized = 0; |
| |
| #ifdef CONFIG_PROC_FS |
| static struct proc_dir_entry *proc_ipmi_root = NULL; |
| #endif /* CONFIG_PROC_FS */ |
| |
| /* Remain in auto-maintenance mode for this amount of time (in ms). */ |
| #define IPMI_MAINTENANCE_MODE_TIMEOUT 30000 |
| |
| #define MAX_EVENTS_IN_QUEUE 25 |
| |
| /* Don't let a message sit in a queue forever, always time it with at lest |
| the max message timer. This is in milliseconds. */ |
| #define MAX_MSG_TIMEOUT 60000 |
| |
| |
| /* |
| * The main "user" data structure. |
| */ |
| struct ipmi_user |
| { |
| struct list_head link; |
| |
| /* Set to "0" when the user is destroyed. */ |
| int valid; |
| |
| struct kref refcount; |
| |
| /* The upper layer that handles receive messages. */ |
| struct ipmi_user_hndl *handler; |
| void *handler_data; |
| |
| /* The interface this user is bound to. */ |
| ipmi_smi_t intf; |
| |
| /* Does this interface receive IPMI events? */ |
| int gets_events; |
| }; |
| |
| struct cmd_rcvr |
| { |
| struct list_head link; |
| |
| ipmi_user_t user; |
| unsigned char netfn; |
| unsigned char cmd; |
| unsigned int chans; |
| |
| /* |
| * This is used to form a linked lised during mass deletion. |
| * Since this is in an RCU list, we cannot use the link above |
| * or change any data until the RCU period completes. So we |
| * use this next variable during mass deletion so we can have |
| * a list and don't have to wait and restart the search on |
| * every individual deletion of a command. */ |
| struct cmd_rcvr *next; |
| }; |
| |
| struct seq_table |
| { |
| unsigned int inuse : 1; |
| unsigned int broadcast : 1; |
| |
| unsigned long timeout; |
| unsigned long orig_timeout; |
| unsigned int retries_left; |
| |
| /* To verify on an incoming send message response that this is |
| the message that the response is for, we keep a sequence id |
| and increment it every time we send a message. */ |
| long seqid; |
| |
| /* This is held so we can properly respond to the message on a |
| timeout, and it is used to hold the temporary data for |
| retransmission, too. */ |
| struct ipmi_recv_msg *recv_msg; |
| }; |
| |
| /* Store the information in a msgid (long) to allow us to find a |
| sequence table entry from the msgid. */ |
| #define STORE_SEQ_IN_MSGID(seq, seqid) (((seq&0xff)<<26) | (seqid&0x3ffffff)) |
| |
| #define GET_SEQ_FROM_MSGID(msgid, seq, seqid) \ |
| do { \ |
| seq = ((msgid >> 26) & 0x3f); \ |
| seqid = (msgid & 0x3fffff); \ |
| } while (0) |
| |
| #define NEXT_SEQID(seqid) (((seqid) + 1) & 0x3fffff) |
| |
| struct ipmi_channel |
| { |
| unsigned char medium; |
| unsigned char protocol; |
| |
| /* My slave address. This is initialized to IPMI_BMC_SLAVE_ADDR, |
| but may be changed by the user. */ |
| unsigned char address; |
| |
| /* My LUN. This should generally stay the SMS LUN, but just in |
| case... */ |
| unsigned char lun; |
| }; |
| |
| #ifdef CONFIG_PROC_FS |
| struct ipmi_proc_entry |
| { |
| char *name; |
| struct ipmi_proc_entry *next; |
| }; |
| #endif |
| |
| struct bmc_device |
| { |
| struct platform_device *dev; |
| struct ipmi_device_id id; |
| unsigned char guid[16]; |
| int guid_set; |
| |
| struct kref refcount; |
| |
| /* bmc device attributes */ |
| struct device_attribute device_id_attr; |
| struct device_attribute provides_dev_sdrs_attr; |
| struct device_attribute revision_attr; |
| struct device_attribute firmware_rev_attr; |
| struct device_attribute version_attr; |
| struct device_attribute add_dev_support_attr; |
| struct device_attribute manufacturer_id_attr; |
| struct device_attribute product_id_attr; |
| struct device_attribute guid_attr; |
| struct device_attribute aux_firmware_rev_attr; |
| }; |
| |
| #define IPMI_IPMB_NUM_SEQ 64 |
| #define IPMI_MAX_CHANNELS 16 |
| struct ipmi_smi |
| { |
| /* What interface number are we? */ |
| int intf_num; |
| |
| struct kref refcount; |
| |
| /* Used for a list of interfaces. */ |
| struct list_head link; |
| |
| /* The list of upper layers that are using me. seq_lock |
| * protects this. */ |
| struct list_head users; |
| |
| /* Information to supply to users. */ |
| unsigned char ipmi_version_major; |
| unsigned char ipmi_version_minor; |
| |
| /* Used for wake ups at startup. */ |
| wait_queue_head_t waitq; |
| |
| struct bmc_device *bmc; |
| char *my_dev_name; |
| char *sysfs_name; |
| |
| /* This is the lower-layer's sender routine. Note that you |
| * must either be holding the ipmi_interfaces_mutex or be in |
| * an umpreemptible region to use this. You must fetch the |
| * value into a local variable and make sure it is not NULL. */ |
| struct ipmi_smi_handlers *handlers; |
| void *send_info; |
| |
| #ifdef CONFIG_PROC_FS |
| /* A list of proc entries for this interface. This does not |
| need a lock, only one thread creates it and only one thread |
| destroys it. */ |
| spinlock_t proc_entry_lock; |
| struct ipmi_proc_entry *proc_entries; |
| #endif |
| |
| /* Driver-model device for the system interface. */ |
| struct device *si_dev; |
| |
| /* A table of sequence numbers for this interface. We use the |
| sequence numbers for IPMB messages that go out of the |
| interface to match them up with their responses. A routine |
| is called periodically to time the items in this list. */ |
| spinlock_t seq_lock; |
| struct seq_table seq_table[IPMI_IPMB_NUM_SEQ]; |
| int curr_seq; |
| |
| /* Messages that were delayed for some reason (out of memory, |
| for instance), will go in here to be processed later in a |
| periodic timer interrupt. */ |
| spinlock_t waiting_msgs_lock; |
| struct list_head waiting_msgs; |
| |
| /* The list of command receivers that are registered for commands |
| on this interface. */ |
| struct mutex cmd_rcvrs_mutex; |
| struct list_head cmd_rcvrs; |
| |
| /* Events that were queues because no one was there to receive |
| them. */ |
| spinlock_t events_lock; /* For dealing with event stuff. */ |
| struct list_head waiting_events; |
| unsigned int waiting_events_count; /* How many events in queue? */ |
| int delivering_events; |
| |
| /* The event receiver for my BMC, only really used at panic |
| shutdown as a place to store this. */ |
| unsigned char event_receiver; |
| unsigned char event_receiver_lun; |
| unsigned char local_sel_device; |
| unsigned char local_event_generator; |
| |
| /* For handling of maintenance mode. */ |
| int maintenance_mode; |
| int maintenance_mode_enable; |
| int auto_maintenance_timeout; |
| spinlock_t maintenance_mode_lock; /* Used in a timer... */ |
| |
| /* A cheap hack, if this is non-null and a message to an |
| interface comes in with a NULL user, call this routine with |
| it. Note that the message will still be freed by the |
| caller. This only works on the system interface. */ |
| void (*null_user_handler)(ipmi_smi_t intf, struct ipmi_recv_msg *msg); |
| |
| /* When we are scanning the channels for an SMI, this will |
| tell which channel we are scanning. */ |
| int curr_channel; |
| |
| /* Channel information */ |
| struct ipmi_channel channels[IPMI_MAX_CHANNELS]; |
| |
| /* Proc FS stuff. */ |
| struct proc_dir_entry *proc_dir; |
| char proc_dir_name[10]; |
| |
| spinlock_t counter_lock; /* For making counters atomic. */ |
| |
| /* Commands we got that were invalid. */ |
| unsigned int sent_invalid_commands; |
| |
| /* Commands we sent to the MC. */ |
| unsigned int sent_local_commands; |
| /* Responses from the MC that were delivered to a user. */ |
| unsigned int handled_local_responses; |
| /* Responses from the MC that were not delivered to a user. */ |
| unsigned int unhandled_local_responses; |
| |
| /* Commands we sent out to the IPMB bus. */ |
| unsigned int sent_ipmb_commands; |
| /* Commands sent on the IPMB that had errors on the SEND CMD */ |
| unsigned int sent_ipmb_command_errs; |
| /* Each retransmit increments this count. */ |
| unsigned int retransmitted_ipmb_commands; |
| /* When a message times out (runs out of retransmits) this is |
| incremented. */ |
| unsigned int timed_out_ipmb_commands; |
| |
| /* This is like above, but for broadcasts. Broadcasts are |
| *not* included in the above count (they are expected to |
| time out). */ |
| unsigned int timed_out_ipmb_broadcasts; |
| |
| /* Responses I have sent to the IPMB bus. */ |
| unsigned int sent_ipmb_responses; |
| |
| /* The response was delivered to the user. */ |
| unsigned int handled_ipmb_responses; |
| /* The response had invalid data in it. */ |
| unsigned int invalid_ipmb_responses; |
| /* The response didn't have anyone waiting for it. */ |
| unsigned int unhandled_ipmb_responses; |
| |
| /* Commands we sent out to the IPMB bus. */ |
| unsigned int sent_lan_commands; |
| /* Commands sent on the IPMB that had errors on the SEND CMD */ |
| unsigned int sent_lan_command_errs; |
| /* Each retransmit increments this count. */ |
| unsigned int retransmitted_lan_commands; |
| /* When a message times out (runs out of retransmits) this is |
| incremented. */ |
| unsigned int timed_out_lan_commands; |
| |
| /* Responses I have sent to the IPMB bus. */ |
| unsigned int sent_lan_responses; |
| |
| /* The response was delivered to the user. */ |
| unsigned int handled_lan_responses; |
| /* The response had invalid data in it. */ |
| unsigned int invalid_lan_responses; |
| /* The response didn't have anyone waiting for it. */ |
| unsigned int unhandled_lan_responses; |
| |
| /* The command was delivered to the user. */ |
| unsigned int handled_commands; |
| /* The command had invalid data in it. */ |
| unsigned int invalid_commands; |
| /* The command didn't have anyone waiting for it. */ |
| unsigned int unhandled_commands; |
| |
| /* Invalid data in an event. */ |
| unsigned int invalid_events; |
| /* Events that were received with the proper format. */ |
| unsigned int events; |
| }; |
| #define to_si_intf_from_dev(device) container_of(device, struct ipmi_smi, dev) |
| |
| /** |
| * The driver model view of the IPMI messaging driver. |
| */ |
| static struct device_driver ipmidriver = { |
| .name = "ipmi", |
| .bus = &platform_bus_type |
| }; |
| static DEFINE_MUTEX(ipmidriver_mutex); |
| |
| static struct list_head ipmi_interfaces = LIST_HEAD_INIT(ipmi_interfaces); |
| static DEFINE_MUTEX(ipmi_interfaces_mutex); |
| |
| /* List of watchers that want to know when smi's are added and |
| deleted. */ |
| static struct list_head smi_watchers = LIST_HEAD_INIT(smi_watchers); |
| static DEFINE_MUTEX(smi_watchers_mutex); |
| |
| |
| static void free_recv_msg_list(struct list_head *q) |
| { |
| struct ipmi_recv_msg *msg, *msg2; |
| |
| list_for_each_entry_safe(msg, msg2, q, link) { |
| list_del(&msg->link); |
| ipmi_free_recv_msg(msg); |
| } |
| } |
| |
| static void free_smi_msg_list(struct list_head *q) |
| { |
| struct ipmi_smi_msg *msg, *msg2; |
| |
| list_for_each_entry_safe(msg, msg2, q, link) { |
| list_del(&msg->link); |
| ipmi_free_smi_msg(msg); |
| } |
| } |
| |
| static void clean_up_interface_data(ipmi_smi_t intf) |
| { |
| int i; |
| struct cmd_rcvr *rcvr, *rcvr2; |
| struct list_head list; |
| |
| free_smi_msg_list(&intf->waiting_msgs); |
| free_recv_msg_list(&intf->waiting_events); |
| |
| /* Wholesale remove all the entries from the list in the |
| * interface and wait for RCU to know that none are in use. */ |
| mutex_lock(&intf->cmd_rcvrs_mutex); |
| list_add_rcu(&list, &intf->cmd_rcvrs); |
| list_del_rcu(&intf->cmd_rcvrs); |
| mutex_unlock(&intf->cmd_rcvrs_mutex); |
| synchronize_rcu(); |
| |
| list_for_each_entry_safe(rcvr, rcvr2, &list, link) |
| kfree(rcvr); |
| |
| for (i = 0; i < IPMI_IPMB_NUM_SEQ; i++) { |
| if ((intf->seq_table[i].inuse) |
| && (intf->seq_table[i].recv_msg)) |
| { |
| ipmi_free_recv_msg(intf->seq_table[i].recv_msg); |
| } |
| } |
| } |
| |
| static void intf_free(struct kref *ref) |
| { |
| ipmi_smi_t intf = container_of(ref, struct ipmi_smi, refcount); |
| |
| clean_up_interface_data(intf); |
| kfree(intf); |
| } |
| |
| struct watcher_entry { |
| int intf_num; |
| ipmi_smi_t intf; |
| struct list_head link; |
| }; |
| |
| int ipmi_smi_watcher_register(struct ipmi_smi_watcher *watcher) |
| { |
| ipmi_smi_t intf; |
| struct list_head to_deliver = LIST_HEAD_INIT(to_deliver); |
| struct watcher_entry *e, *e2; |
| |
| mutex_lock(&smi_watchers_mutex); |
| |
| mutex_lock(&ipmi_interfaces_mutex); |
| |
| /* Build a list of things to deliver. */ |
| list_for_each_entry_rcu(intf, &ipmi_interfaces, link) { |
| if (intf->intf_num == -1) |
| continue; |
| e = kmalloc(sizeof(*e), GFP_KERNEL); |
| if (!e) |
| goto out_err; |
| kref_get(&intf->refcount); |
| e->intf = intf; |
| e->intf_num = intf->intf_num; |
| list_add_tail(&e->link, &to_deliver); |
| } |
| |
| /* We will succeed, so add it to the list. */ |
| list_add(&watcher->link, &smi_watchers); |
| |
| mutex_unlock(&ipmi_interfaces_mutex); |
| |
| list_for_each_entry_safe(e, e2, &to_deliver, link) { |
| list_del(&e->link); |
| watcher->new_smi(e->intf_num, e->intf->si_dev); |
| kref_put(&e->intf->refcount, intf_free); |
| kfree(e); |
| } |
| |
| mutex_unlock(&smi_watchers_mutex); |
| |
| return 0; |
| |
| out_err: |
| mutex_unlock(&ipmi_interfaces_mutex); |
| mutex_unlock(&smi_watchers_mutex); |
| list_for_each_entry_safe(e, e2, &to_deliver, link) { |
| list_del(&e->link); |
| kref_put(&e->intf->refcount, intf_free); |
| kfree(e); |
| } |
| return -ENOMEM; |
| } |
| |
| int ipmi_smi_watcher_unregister(struct ipmi_smi_watcher *watcher) |
| { |
| mutex_lock(&smi_watchers_mutex); |
| list_del(&(watcher->link)); |
| mutex_unlock(&smi_watchers_mutex); |
| return 0; |
| } |
| |
| /* |
| * Must be called with smi_watchers_mutex held. |
| */ |
| static void |
| call_smi_watchers(int i, struct device *dev) |
| { |
| struct ipmi_smi_watcher *w; |
| |
| list_for_each_entry(w, &smi_watchers, link) { |
| if (try_module_get(w->owner)) { |
| w->new_smi(i, dev); |
| module_put(w->owner); |
| } |
| } |
| } |
| |
| static int |
| ipmi_addr_equal(struct ipmi_addr *addr1, struct ipmi_addr *addr2) |
| { |
| if (addr1->addr_type != addr2->addr_type) |
| return 0; |
| |
| if (addr1->channel != addr2->channel) |
| return 0; |
| |
| if (addr1->addr_type == IPMI_SYSTEM_INTERFACE_ADDR_TYPE) { |
| struct ipmi_system_interface_addr *smi_addr1 |
| = (struct ipmi_system_interface_addr *) addr1; |
| struct ipmi_system_interface_addr *smi_addr2 |
| = (struct ipmi_system_interface_addr *) addr2; |
| return (smi_addr1->lun == smi_addr2->lun); |
| } |
| |
| if ((addr1->addr_type == IPMI_IPMB_ADDR_TYPE) |
| || (addr1->addr_type == IPMI_IPMB_BROADCAST_ADDR_TYPE)) |
| { |
| struct ipmi_ipmb_addr *ipmb_addr1 |
| = (struct ipmi_ipmb_addr *) addr1; |
| struct ipmi_ipmb_addr *ipmb_addr2 |
| = (struct ipmi_ipmb_addr *) addr2; |
| |
| return ((ipmb_addr1->slave_addr == ipmb_addr2->slave_addr) |
| && (ipmb_addr1->lun == ipmb_addr2->lun)); |
| } |
| |
| if (addr1->addr_type == IPMI_LAN_ADDR_TYPE) { |
| struct ipmi_lan_addr *lan_addr1 |
| = (struct ipmi_lan_addr *) addr1; |
| struct ipmi_lan_addr *lan_addr2 |
| = (struct ipmi_lan_addr *) addr2; |
| |
| return ((lan_addr1->remote_SWID == lan_addr2->remote_SWID) |
| && (lan_addr1->local_SWID == lan_addr2->local_SWID) |
| && (lan_addr1->session_handle |
| == lan_addr2->session_handle) |
| && (lan_addr1->lun == lan_addr2->lun)); |
| } |
| |
| return 1; |
| } |
| |
| int ipmi_validate_addr(struct ipmi_addr *addr, int len) |
| { |
| if (len < sizeof(struct ipmi_system_interface_addr)) { |
| return -EINVAL; |
| } |
| |
| if (addr->addr_type == IPMI_SYSTEM_INTERFACE_ADDR_TYPE) { |
| if (addr->channel != IPMI_BMC_CHANNEL) |
| return -EINVAL; |
| return 0; |
| } |
| |
| if ((addr->channel == IPMI_BMC_CHANNEL) |
| || (addr->channel >= IPMI_MAX_CHANNELS) |
| || (addr->channel < 0)) |
| return -EINVAL; |
| |
| if ((addr->addr_type == IPMI_IPMB_ADDR_TYPE) |
| || (addr->addr_type == IPMI_IPMB_BROADCAST_ADDR_TYPE)) |
| { |
| if (len < sizeof(struct ipmi_ipmb_addr)) { |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| if (addr->addr_type == IPMI_LAN_ADDR_TYPE) { |
| if (len < sizeof(struct ipmi_lan_addr)) { |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| return -EINVAL; |
| } |
| |
| unsigned int ipmi_addr_length(int addr_type) |
| { |
| if (addr_type == IPMI_SYSTEM_INTERFACE_ADDR_TYPE) |
| return sizeof(struct ipmi_system_interface_addr); |
| |
| if ((addr_type == IPMI_IPMB_ADDR_TYPE) |
| || (addr_type == IPMI_IPMB_BROADCAST_ADDR_TYPE)) |
| { |
| return sizeof(struct ipmi_ipmb_addr); |
| } |
| |
| if (addr_type == IPMI_LAN_ADDR_TYPE) |
| return sizeof(struct ipmi_lan_addr); |
| |
| return 0; |
| } |
| |
| static void deliver_response(struct ipmi_recv_msg *msg) |
| { |
| if (!msg->user) { |
| ipmi_smi_t intf = msg->user_msg_data; |
| unsigned long flags; |
| |
| /* Special handling for NULL users. */ |
| if (intf->null_user_handler) { |
| intf->null_user_handler(intf, msg); |
| spin_lock_irqsave(&intf->counter_lock, flags); |
| intf->handled_local_responses++; |
| spin_unlock_irqrestore(&intf->counter_lock, flags); |
| } else { |
| /* No handler, so give up. */ |
| spin_lock_irqsave(&intf->counter_lock, flags); |
| intf->unhandled_local_responses++; |
| spin_unlock_irqrestore(&intf->counter_lock, flags); |
| } |
| ipmi_free_recv_msg(msg); |
| } else { |
| ipmi_user_t user = msg->user; |
| user->handler->ipmi_recv_hndl(msg, user->handler_data); |
| } |
| } |
| |
| static void |
| deliver_err_response(struct ipmi_recv_msg *msg, int err) |
| { |
| msg->recv_type = IPMI_RESPONSE_RECV_TYPE; |
| msg->msg_data[0] = err; |
| msg->msg.netfn |= 1; /* Convert to a response. */ |
| msg->msg.data_len = 1; |
| msg->msg.data = msg->msg_data; |
| deliver_response(msg); |
| } |
| |
| /* Find the next sequence number not being used and add the given |
| message with the given timeout to the sequence table. This must be |
| called with the interface's seq_lock held. */ |
| static int intf_next_seq(ipmi_smi_t intf, |
| struct ipmi_recv_msg *recv_msg, |
| unsigned long timeout, |
| int retries, |
| int broadcast, |
| unsigned char *seq, |
| long *seqid) |
| { |
| int rv = 0; |
| unsigned int i; |
| |
| for (i = intf->curr_seq; |
| (i+1)%IPMI_IPMB_NUM_SEQ != intf->curr_seq; |
| i = (i+1)%IPMI_IPMB_NUM_SEQ) |
| { |
| if (!intf->seq_table[i].inuse) |
| break; |
| } |
| |
| if (!intf->seq_table[i].inuse) { |
| intf->seq_table[i].recv_msg = recv_msg; |
| |
| /* Start with the maximum timeout, when the send response |
| comes in we will start the real timer. */ |
| intf->seq_table[i].timeout = MAX_MSG_TIMEOUT; |
| intf->seq_table[i].orig_timeout = timeout; |
| intf->seq_table[i].retries_left = retries; |
| intf->seq_table[i].broadcast = broadcast; |
| intf->seq_table[i].inuse = 1; |
| intf->seq_table[i].seqid = NEXT_SEQID(intf->seq_table[i].seqid); |
| *seq = i; |
| *seqid = intf->seq_table[i].seqid; |
| intf->curr_seq = (i+1)%IPMI_IPMB_NUM_SEQ; |
| } else { |
| rv = -EAGAIN; |
| } |
| |
| return rv; |
| } |
| |
| /* Return the receive message for the given sequence number and |
| release the sequence number so it can be reused. Some other data |
| is passed in to be sure the message matches up correctly (to help |
| guard against message coming in after their timeout and the |
| sequence number being reused). */ |
| static int intf_find_seq(ipmi_smi_t intf, |
| unsigned char seq, |
| short channel, |
| unsigned char cmd, |
| unsigned char netfn, |
| struct ipmi_addr *addr, |
| struct ipmi_recv_msg **recv_msg) |
| { |
| int rv = -ENODEV; |
| unsigned long flags; |
| |
| if (seq >= IPMI_IPMB_NUM_SEQ) |
| return -EINVAL; |
| |
| spin_lock_irqsave(&(intf->seq_lock), flags); |
| if (intf->seq_table[seq].inuse) { |
| struct ipmi_recv_msg *msg = intf->seq_table[seq].recv_msg; |
| |
| if ((msg->addr.channel == channel) |
| && (msg->msg.cmd == cmd) |
| && (msg->msg.netfn == netfn) |
| && (ipmi_addr_equal(addr, &(msg->addr)))) |
| { |
| *recv_msg = msg; |
| intf->seq_table[seq].inuse = 0; |
| rv = 0; |
| } |
| } |
| spin_unlock_irqrestore(&(intf->seq_lock), flags); |
| |
| return rv; |
| } |
| |
| |
| /* Start the timer for a specific sequence table entry. */ |
| static int intf_start_seq_timer(ipmi_smi_t intf, |
| long msgid) |
| { |
| int rv = -ENODEV; |
| unsigned long flags; |
| unsigned char seq; |
| unsigned long seqid; |
| |
| |
| GET_SEQ_FROM_MSGID(msgid, seq, seqid); |
| |
| spin_lock_irqsave(&(intf->seq_lock), flags); |
| /* We do this verification because the user can be deleted |
| while a message is outstanding. */ |
| if ((intf->seq_table[seq].inuse) |
| && (intf->seq_table[seq].seqid == seqid)) |
| { |
| struct seq_table *ent = &(intf->seq_table[seq]); |
| ent->timeout = ent->orig_timeout; |
| rv = 0; |
| } |
| spin_unlock_irqrestore(&(intf->seq_lock), flags); |
| |
| return rv; |
| } |
| |
| /* Got an error for the send message for a specific sequence number. */ |
| static int intf_err_seq(ipmi_smi_t intf, |
| long msgid, |
| unsigned int err) |
| { |
| int rv = -ENODEV; |
| unsigned long flags; |
| unsigned char seq; |
| unsigned long seqid; |
| struct ipmi_recv_msg *msg = NULL; |
| |
| |
| GET_SEQ_FROM_MSGID(msgid, seq, seqid); |
| |
| spin_lock_irqsave(&(intf->seq_lock), flags); |
| /* We do this verification because the user can be deleted |
| while a message is outstanding. */ |
| if ((intf->seq_table[seq].inuse) |
| && (intf->seq_table[seq].seqid == seqid)) |
| { |
| struct seq_table *ent = &(intf->seq_table[seq]); |
| |
| ent->inuse = 0; |
| msg = ent->recv_msg; |
| rv = 0; |
| } |
| spin_unlock_irqrestore(&(intf->seq_lock), flags); |
| |
| if (msg) |
| deliver_err_response(msg, err); |
| |
| return rv; |
| } |
| |
| |
| int ipmi_create_user(unsigned int if_num, |
| struct ipmi_user_hndl *handler, |
| void *handler_data, |
| ipmi_user_t *user) |
| { |
| unsigned long flags; |
| ipmi_user_t new_user; |
| int rv = 0; |
| ipmi_smi_t intf; |
| |
| /* There is no module usecount here, because it's not |
| required. Since this can only be used by and called from |
| other modules, they will implicitly use this module, and |
| thus this can't be removed unless the other modules are |
| removed. */ |
| |
| if (handler == NULL) |
| return -EINVAL; |
| |
| /* Make sure the driver is actually initialized, this handles |
| problems with initialization order. */ |
| if (!initialized) { |
| rv = ipmi_init_msghandler(); |
| if (rv) |
| return rv; |
| |
| /* The init code doesn't return an error if it was turned |
| off, but it won't initialize. Check that. */ |
| if (!initialized) |
| return -ENODEV; |
| } |
| |
| new_user = kmalloc(sizeof(*new_user), GFP_KERNEL); |
| if (!new_user) |
| return -ENOMEM; |
| |
| mutex_lock(&ipmi_interfaces_mutex); |
| list_for_each_entry_rcu(intf, &ipmi_interfaces, link) { |
| if (intf->intf_num == if_num) |
| goto found; |
| } |
| /* Not found, return an error */ |
| rv = -EINVAL; |
| goto out_kfree; |
| |
| found: |
| /* Note that each existing user holds a refcount to the interface. */ |
| kref_get(&intf->refcount); |
| |
| kref_init(&new_user->refcount); |
| new_user->handler = handler; |
| new_user->handler_data = handler_data; |
| new_user->intf = intf; |
| new_user->gets_events = 0; |
| |
| if (!try_module_get(intf->handlers->owner)) { |
| rv = -ENODEV; |
| goto out_kref; |
| } |
| |
| if (intf->handlers->inc_usecount) { |
| rv = intf->handlers->inc_usecount(intf->send_info); |
| if (rv) { |
| module_put(intf->handlers->owner); |
| goto out_kref; |
| } |
| } |
| |
| /* Hold the lock so intf->handlers is guaranteed to be good |
| * until now */ |
| mutex_unlock(&ipmi_interfaces_mutex); |
| |
| new_user->valid = 1; |
| spin_lock_irqsave(&intf->seq_lock, flags); |
| list_add_rcu(&new_user->link, &intf->users); |
| spin_unlock_irqrestore(&intf->seq_lock, flags); |
| *user = new_user; |
| return 0; |
| |
| out_kref: |
| kref_put(&intf->refcount, intf_free); |
| out_kfree: |
| mutex_unlock(&ipmi_interfaces_mutex); |
| kfree(new_user); |
| return rv; |
| } |
| |
| static void free_user(struct kref *ref) |
| { |
| ipmi_user_t user = container_of(ref, struct ipmi_user, refcount); |
| kfree(user); |
| } |
| |
| int ipmi_destroy_user(ipmi_user_t user) |
| { |
| ipmi_smi_t intf = user->intf; |
| int i; |
| unsigned long flags; |
| struct cmd_rcvr *rcvr; |
| struct cmd_rcvr *rcvrs = NULL; |
| |
| user->valid = 0; |
| |
| /* Remove the user from the interface's sequence table. */ |
| spin_lock_irqsave(&intf->seq_lock, flags); |
| list_del_rcu(&user->link); |
| |
| for (i = 0; i < IPMI_IPMB_NUM_SEQ; i++) { |
| if (intf->seq_table[i].inuse |
| && (intf->seq_table[i].recv_msg->user == user)) |
| { |
| intf->seq_table[i].inuse = 0; |
| ipmi_free_recv_msg(intf->seq_table[i].recv_msg); |
| } |
| } |
| spin_unlock_irqrestore(&intf->seq_lock, flags); |
| |
| /* |
| * Remove the user from the command receiver's table. First |
| * we build a list of everything (not using the standard link, |
| * since other things may be using it till we do |
| * synchronize_rcu()) then free everything in that list. |
| */ |
| mutex_lock(&intf->cmd_rcvrs_mutex); |
| list_for_each_entry_rcu(rcvr, &intf->cmd_rcvrs, link) { |
| if (rcvr->user == user) { |
| list_del_rcu(&rcvr->link); |
| rcvr->next = rcvrs; |
| rcvrs = rcvr; |
| } |
| } |
| mutex_unlock(&intf->cmd_rcvrs_mutex); |
| synchronize_rcu(); |
| while (rcvrs) { |
| rcvr = rcvrs; |
| rcvrs = rcvr->next; |
| kfree(rcvr); |
| } |
| |
| mutex_lock(&ipmi_interfaces_mutex); |
| if (intf->handlers) { |
| module_put(intf->handlers->owner); |
| if (intf->handlers->dec_usecount) |
| intf->handlers->dec_usecount(intf->send_info); |
| } |
| mutex_unlock(&ipmi_interfaces_mutex); |
| |
| kref_put(&intf->refcount, intf_free); |
| |
| kref_put(&user->refcount, free_user); |
| |
| return 0; |
| } |
| |
| void ipmi_get_version(ipmi_user_t user, |
| unsigned char *major, |
| unsigned char *minor) |
| { |
| *major = user->intf->ipmi_version_major; |
| *minor = user->intf->ipmi_version_minor; |
| } |
| |
| int ipmi_set_my_address(ipmi_user_t user, |
| unsigned int channel, |
| unsigned char address) |
| { |
| if (channel >= IPMI_MAX_CHANNELS) |
| return -EINVAL; |
| user->intf->channels[channel].address = address; |
| return 0; |
| } |
| |
| int ipmi_get_my_address(ipmi_user_t user, |
| unsigned int channel, |
| unsigned char *address) |
| { |
| if (channel >= IPMI_MAX_CHANNELS) |
| return -EINVAL; |
| *address = user->intf->channels[channel].address; |
| return 0; |
| } |
| |
| int ipmi_set_my_LUN(ipmi_user_t user, |
| unsigned int channel, |
| unsigned char LUN) |
| { |
| if (channel >= IPMI_MAX_CHANNELS) |
| return -EINVAL; |
| user->intf->channels[channel].lun = LUN & 0x3; |
| return 0; |
| } |
| |
| int ipmi_get_my_LUN(ipmi_user_t user, |
| unsigned int channel, |
| unsigned char *address) |
| { |
| if (channel >= IPMI_MAX_CHANNELS) |
| return -EINVAL; |
| *address = user->intf->channels[channel].lun; |
| return 0; |
| } |
| |
| int ipmi_get_maintenance_mode(ipmi_user_t user) |
| { |
| int mode; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&user->intf->maintenance_mode_lock, flags); |
| mode = user->intf->maintenance_mode; |
| spin_unlock_irqrestore(&user->intf->maintenance_mode_lock, flags); |
| |
| return mode; |
| } |
| EXPORT_SYMBOL(ipmi_get_maintenance_mode); |
| |
| static void maintenance_mode_update(ipmi_smi_t intf) |
| { |
| if (intf->handlers->set_maintenance_mode) |
| intf->handlers->set_maintenance_mode( |
| intf->send_info, intf->maintenance_mode_enable); |
| } |
| |
| int ipmi_set_maintenance_mode(ipmi_user_t user, int mode) |
| { |
| int rv = 0; |
| unsigned long flags; |
| ipmi_smi_t intf = user->intf; |
| |
| spin_lock_irqsave(&intf->maintenance_mode_lock, flags); |
| if (intf->maintenance_mode != mode) { |
| switch (mode) { |
| case IPMI_MAINTENANCE_MODE_AUTO: |
| intf->maintenance_mode = mode; |
| intf->maintenance_mode_enable |
| = (intf->auto_maintenance_timeout > 0); |
| break; |
| |
| case IPMI_MAINTENANCE_MODE_OFF: |
| intf->maintenance_mode = mode; |
| intf->maintenance_mode_enable = 0; |
| break; |
| |
| case IPMI_MAINTENANCE_MODE_ON: |
| intf->maintenance_mode = mode; |
| intf->maintenance_mode_enable = 1; |
| break; |
| |
| default: |
| rv = -EINVAL; |
| goto out_unlock; |
| } |
| |
| maintenance_mode_update(intf); |
| } |
| out_unlock: |
| spin_unlock_irqrestore(&intf->maintenance_mode_lock, flags); |
| |
| return rv; |
| } |
| EXPORT_SYMBOL(ipmi_set_maintenance_mode); |
| |
| int ipmi_set_gets_events(ipmi_user_t user, int val) |
| { |
| unsigned long flags; |
| ipmi_smi_t intf = user->intf; |
| struct ipmi_recv_msg *msg, *msg2; |
| struct list_head msgs; |
| |
| INIT_LIST_HEAD(&msgs); |
| |
| spin_lock_irqsave(&intf->events_lock, flags); |
| user->gets_events = val; |
| |
| if (intf->delivering_events) |
| /* |
| * Another thread is delivering events for this, so |
| * let it handle any new events. |
| */ |
| goto out; |
| |
| /* Deliver any queued events. */ |
| while (user->gets_events && !list_empty(&intf->waiting_events)) { |
| list_for_each_entry_safe(msg, msg2, &intf->waiting_events, link) |
| list_move_tail(&msg->link, &msgs); |
| intf->waiting_events_count = 0; |
| |
| intf->delivering_events = 1; |
| spin_unlock_irqrestore(&intf->events_lock, flags); |
| |
| list_for_each_entry_safe(msg, msg2, &msgs, link) { |
| msg->user = user; |
| kref_get(&user->refcount); |
| deliver_response(msg); |
| } |
| |
| spin_lock_irqsave(&intf->events_lock, flags); |
| intf->delivering_events = 0; |
| } |
| |
| out: |
| spin_unlock_irqrestore(&intf->events_lock, flags); |
| |
| return 0; |
| } |
| |
| static struct cmd_rcvr *find_cmd_rcvr(ipmi_smi_t intf, |
| unsigned char netfn, |
| unsigned char cmd, |
| unsigned char chan) |
| { |
| struct cmd_rcvr *rcvr; |
| |
| list_for_each_entry_rcu(rcvr, &intf->cmd_rcvrs, link) { |
| if ((rcvr->netfn == netfn) && (rcvr->cmd == cmd) |
| && (rcvr->chans & (1 << chan))) |
| return rcvr; |
| } |
| return NULL; |
| } |
| |
| static int is_cmd_rcvr_exclusive(ipmi_smi_t intf, |
| unsigned char netfn, |
| unsigned char cmd, |
| unsigned int chans) |
| { |
| struct cmd_rcvr *rcvr; |
| |
| list_for_each_entry_rcu(rcvr, &intf->cmd_rcvrs, link) { |
| if ((rcvr->netfn == netfn) && (rcvr->cmd == cmd) |
| && (rcvr->chans & chans)) |
| return 0; |
| } |
| return 1; |
| } |
| |
| int ipmi_register_for_cmd(ipmi_user_t user, |
| unsigned char netfn, |
| unsigned char cmd, |
| unsigned int chans) |
| { |
| ipmi_smi_t intf = user->intf; |
| struct cmd_rcvr *rcvr; |
| int rv = 0; |
| |
| |
| rcvr = kmalloc(sizeof(*rcvr), GFP_KERNEL); |
| if (!rcvr) |
| return -ENOMEM; |
| rcvr->cmd = cmd; |
| rcvr->netfn = netfn; |
| rcvr->chans = chans; |
| rcvr->user = user; |
| |
| mutex_lock(&intf->cmd_rcvrs_mutex); |
| /* Make sure the command/netfn is not already registered. */ |
| if (!is_cmd_rcvr_exclusive(intf, netfn, cmd, chans)) { |
| rv = -EBUSY; |
| goto out_unlock; |
| } |
| |
| list_add_rcu(&rcvr->link, &intf->cmd_rcvrs); |
| |
| out_unlock: |
| mutex_unlock(&intf->cmd_rcvrs_mutex); |
| if (rv) |
| kfree(rcvr); |
| |
| return rv; |
| } |
| |
| int ipmi_unregister_for_cmd(ipmi_user_t user, |
| unsigned char netfn, |
| unsigned char cmd, |
| unsigned int chans) |
| { |
| ipmi_smi_t intf = user->intf; |
| struct cmd_rcvr *rcvr; |
| struct cmd_rcvr *rcvrs = NULL; |
| int i, rv = -ENOENT; |
| |
| mutex_lock(&intf->cmd_rcvrs_mutex); |
| for (i = 0; i < IPMI_NUM_CHANNELS; i++) { |
| if (((1 << i) & chans) == 0) |
| continue; |
| rcvr = find_cmd_rcvr(intf, netfn, cmd, i); |
| if (rcvr == NULL) |
| continue; |
| if (rcvr->user == user) { |
| rv = 0; |
| rcvr->chans &= ~chans; |
| if (rcvr->chans == 0) { |
| list_del_rcu(&rcvr->link); |
| rcvr->next = rcvrs; |
| rcvrs = rcvr; |
| } |
| } |
| } |
| mutex_unlock(&intf->cmd_rcvrs_mutex); |
| synchronize_rcu(); |
| while (rcvrs) { |
| rcvr = rcvrs; |
| rcvrs = rcvr->next; |
| kfree(rcvr); |
| } |
| return rv; |
| } |
| |
| void ipmi_user_set_run_to_completion(ipmi_user_t user, int val) |
| { |
| ipmi_smi_t intf = user->intf; |
| if (intf->handlers) |
| intf->handlers->set_run_to_completion(intf->send_info, val); |
| } |
| |
| static unsigned char |
| ipmb_checksum(unsigned char *data, int size) |
| { |
| unsigned char csum = 0; |
| |
| for (; size > 0; size--, data++) |
| csum += *data; |
| |
| return -csum; |
| } |
| |
| static inline void format_ipmb_msg(struct ipmi_smi_msg *smi_msg, |
| struct kernel_ipmi_msg *msg, |
| struct ipmi_ipmb_addr *ipmb_addr, |
| long msgid, |
| unsigned char ipmb_seq, |
| int broadcast, |
| unsigned char source_address, |
| unsigned char source_lun) |
| { |
| int i = broadcast; |
| |
| /* Format the IPMB header data. */ |
| smi_msg->data[0] = (IPMI_NETFN_APP_REQUEST << 2); |
| smi_msg->data[1] = IPMI_SEND_MSG_CMD; |
| smi_msg->data[2] = ipmb_addr->channel; |
| if (broadcast) |
| smi_msg->data[3] = 0; |
| smi_msg->data[i+3] = ipmb_addr->slave_addr; |
| smi_msg->data[i+4] = (msg->netfn << 2) | (ipmb_addr->lun & 0x3); |
| smi_msg->data[i+5] = ipmb_checksum(&(smi_msg->data[i+3]), 2); |
| smi_msg->data[i+6] = source_address; |
| smi_msg->data[i+7] = (ipmb_seq << 2) | source_lun; |
| smi_msg->data[i+8] = msg->cmd; |
| |
| /* Now tack on the data to the message. */ |
| if (msg->data_len > 0) |
| memcpy(&(smi_msg->data[i+9]), msg->data, |
| msg->data_len); |
| smi_msg->data_size = msg->data_len + 9; |
| |
| /* Now calculate the checksum and tack it on. */ |
| smi_msg->data[i+smi_msg->data_size] |
| = ipmb_checksum(&(smi_msg->data[i+6]), |
| smi_msg->data_size-6); |
| |
| /* Add on the checksum size and the offset from the |
| broadcast. */ |
| smi_msg->data_size += 1 + i; |
| |
| smi_msg->msgid = msgid; |
| } |
| |
| static inline void format_lan_msg(struct ipmi_smi_msg *smi_msg, |
| struct kernel_ipmi_msg *msg, |
| struct ipmi_lan_addr *lan_addr, |
| long msgid, |
| unsigned char ipmb_seq, |
| unsigned char source_lun) |
| { |
| /* Format the IPMB header data. */ |
| smi_msg->data[0] = (IPMI_NETFN_APP_REQUEST << 2); |
| smi_msg->data[1] = IPMI_SEND_MSG_CMD; |
| smi_msg->data[2] = lan_addr->channel; |
| smi_msg->data[3] = lan_addr->session_handle; |
| smi_msg->data[4] = lan_addr->remote_SWID; |
| smi_msg->data[5] = (msg->netfn << 2) | (lan_addr->lun & 0x3); |
| smi_msg->data[6] = ipmb_checksum(&(smi_msg->data[4]), 2); |
| smi_msg->data[7] = lan_addr->local_SWID; |
| smi_msg->data[8] = (ipmb_seq << 2) | source_lun; |
| smi_msg->data[9] = msg->cmd; |
| |
| /* Now tack on the data to the message. */ |
| if (msg->data_len > 0) |
| memcpy(&(smi_msg->data[10]), msg->data, |
| msg->data_len); |
| smi_msg->data_size = msg->data_len + 10; |
| |
| /* Now calculate the checksum and tack it on. */ |
| smi_msg->data[smi_msg->data_size] |
| = ipmb_checksum(&(smi_msg->data[7]), |
| smi_msg->data_size-7); |
| |
| /* Add on the checksum size and the offset from the |
| broadcast. */ |
| smi_msg->data_size += 1; |
| |
| smi_msg->msgid = msgid; |
| } |
| |
| /* Separate from ipmi_request so that the user does not have to be |
| supplied in certain circumstances (mainly at panic time). If |
| messages are supplied, they will be freed, even if an error |
| occurs. */ |
| static int i_ipmi_request(ipmi_user_t user, |
| ipmi_smi_t intf, |
| struct ipmi_addr *addr, |
| long msgid, |
| struct kernel_ipmi_msg *msg, |
| void *user_msg_data, |
| void *supplied_smi, |
| struct ipmi_recv_msg *supplied_recv, |
| int priority, |
| unsigned char source_address, |
| unsigned char source_lun, |
| int retries, |
| unsigned int retry_time_ms) |
| { |
| int rv = 0; |
| struct ipmi_smi_msg *smi_msg; |
| struct ipmi_recv_msg *recv_msg; |
| unsigned long flags; |
| struct ipmi_smi_handlers *handlers; |
| |
| |
| if (supplied_recv) { |
| recv_msg = supplied_recv; |
| } else { |
| recv_msg = ipmi_alloc_recv_msg(); |
| if (recv_msg == NULL) { |
| return -ENOMEM; |
| } |
| } |
| recv_msg->user_msg_data = user_msg_data; |
| |
| if (supplied_smi) { |
| smi_msg = (struct ipmi_smi_msg *) supplied_smi; |
| } else { |
| smi_msg = ipmi_alloc_smi_msg(); |
| if (smi_msg == NULL) { |
| ipmi_free_recv_msg(recv_msg); |
| return -ENOMEM; |
| } |
| } |
| |
| rcu_read_lock(); |
| handlers = intf->handlers; |
| if (!handlers) { |
| rv = -ENODEV; |
| goto out_err; |
| } |
| |
| recv_msg->user = user; |
| if (user) |
| kref_get(&user->refcount); |
| recv_msg->msgid = msgid; |
| /* Store the message to send in the receive message so timeout |
| responses can get the proper response data. */ |
| recv_msg->msg = *msg; |
| |
| if (addr->addr_type == IPMI_SYSTEM_INTERFACE_ADDR_TYPE) { |
| struct ipmi_system_interface_addr *smi_addr; |
| |
| if (msg->netfn & 1) { |
| /* Responses are not allowed to the SMI. */ |
| rv = -EINVAL; |
| goto out_err; |
| } |
| |
| smi_addr = (struct ipmi_system_interface_addr *) addr; |
| if (smi_addr->lun > 3) { |
| spin_lock_irqsave(&intf->counter_lock, flags); |
| intf->sent_invalid_commands++; |
| spin_unlock_irqrestore(&intf->counter_lock, flags); |
| rv = -EINVAL; |
| goto out_err; |
| } |
| |
| memcpy(&recv_msg->addr, smi_addr, sizeof(*smi_addr)); |
| |
| if ((msg->netfn == IPMI_NETFN_APP_REQUEST) |
| && ((msg->cmd == IPMI_SEND_MSG_CMD) |
| || (msg->cmd == IPMI_GET_MSG_CMD) |
| || (msg->cmd == IPMI_READ_EVENT_MSG_BUFFER_CMD))) |
| { |
| /* We don't let the user do these, since we manage |
| the sequence numbers. */ |
| spin_lock_irqsave(&intf->counter_lock, flags); |
| intf->sent_invalid_commands++; |
| spin_unlock_irqrestore(&intf->counter_lock, flags); |
| rv = -EINVAL; |
| goto out_err; |
| } |
| |
| if (((msg->netfn == IPMI_NETFN_APP_REQUEST) |
| && ((msg->cmd == IPMI_COLD_RESET_CMD) |
| || (msg->cmd == IPMI_WARM_RESET_CMD))) |
| || (msg->netfn == IPMI_NETFN_FIRMWARE_REQUEST)) |
| { |
| spin_lock_irqsave(&intf->maintenance_mode_lock, flags); |
| intf->auto_maintenance_timeout |
| = IPMI_MAINTENANCE_MODE_TIMEOUT; |
| if (!intf->maintenance_mode |
| && !intf->maintenance_mode_enable) |
| { |
| intf->maintenance_mode_enable = 1; |
| maintenance_mode_update(intf); |
| } |
| spin_unlock_irqrestore(&intf->maintenance_mode_lock, |
| flags); |
| } |
| |
| if ((msg->data_len + 2) > IPMI_MAX_MSG_LENGTH) { |
| spin_lock_irqsave(&intf->counter_lock, flags); |
| intf->sent_invalid_commands++; |
| spin_unlock_irqrestore(&intf->counter_lock, flags); |
| rv = -EMSGSIZE; |
| goto out_err; |
| } |
| |
| smi_msg->data[0] = (msg->netfn << 2) | (smi_addr->lun & 0x3); |
| smi_msg->data[1] = msg->cmd; |
| smi_msg->msgid = msgid; |
| smi_msg->user_data = recv_msg; |
| if (msg->data_len > 0) |
| memcpy(&(smi_msg->data[2]), msg->data, msg->data_len); |
| smi_msg->data_size = msg->data_len + 2; |
| spin_lock_irqsave(&intf->counter_lock, flags); |
| intf->sent_local_commands++; |
| spin_unlock_irqrestore(&intf->counter_lock, flags); |
| } else if ((addr->addr_type == IPMI_IPMB_ADDR_TYPE) |
| || (addr->addr_type == IPMI_IPMB_BROADCAST_ADDR_TYPE)) |
| { |
| struct ipmi_ipmb_addr *ipmb_addr; |
| unsigned char ipmb_seq; |
| long seqid; |
| int broadcast = 0; |
| |
| if (addr->channel >= IPMI_MAX_CHANNELS) { |
| spin_lock_irqsave(&intf->counter_lock, flags); |
| intf->sent_invalid_commands++; |
| spin_unlock_irqrestore(&intf->counter_lock, flags); |
| rv = -EINVAL; |
| goto out_err; |
| } |
| |
| if (intf->channels[addr->channel].medium |
| != IPMI_CHANNEL_MEDIUM_IPMB) |
| { |
| spin_lock_irqsave(&intf->counter_lock, flags); |
| intf->sent_invalid_commands++; |
| spin_unlock_irqrestore(&intf->counter_lock, flags); |
| rv = -EINVAL; |
| goto out_err; |
| } |
| |
| if (retries < 0) { |
| if (addr->addr_type == IPMI_IPMB_BROADCAST_ADDR_TYPE) |
| retries = 0; /* Don't retry broadcasts. */ |
| else |
| retries = 4; |
| } |
| if (addr->addr_type == IPMI_IPMB_BROADCAST_ADDR_TYPE) { |
| /* Broadcasts add a zero at the beginning of the |
| message, but otherwise is the same as an IPMB |
| address. */ |
| addr->addr_type = IPMI_IPMB_ADDR_TYPE; |
| broadcast = 1; |
| } |
| |
| |
| /* Default to 1 second retries. */ |
| if (retry_time_ms == 0) |
| retry_time_ms = 1000; |
| |
| /* 9 for the header and 1 for the checksum, plus |
| possibly one for the broadcast. */ |
| if ((msg->data_len + 10 + broadcast) > IPMI_MAX_MSG_LENGTH) { |
| spin_lock_irqsave(&intf->counter_lock, flags); |
| intf->sent_invalid_commands++; |
| spin_unlock_irqrestore(&intf->counter_lock, flags); |
| rv = -EMSGSIZE; |
| goto out_err; |
| } |
| |
| ipmb_addr = (struct ipmi_ipmb_addr *) addr; |
| if (ipmb_addr->lun > 3) { |
| spin_lock_irqsave(&intf->counter_lock, flags); |
| intf->sent_invalid_commands++; |
| spin_unlock_irqrestore(&intf->counter_lock, flags); |
| rv = -EINVAL; |
| goto out_err; |
| } |
| |
| memcpy(&recv_msg->addr, ipmb_addr, sizeof(*ipmb_addr)); |
| |
| if (recv_msg->msg.netfn & 0x1) { |
| /* It's a response, so use the user's sequence |
| from msgid. */ |
| spin_lock_irqsave(&intf->counter_lock, flags); |
| intf->sent_ipmb_responses++; |
| spin_unlock_irqrestore(&intf->counter_lock, flags); |
| format_ipmb_msg(smi_msg, msg, ipmb_addr, msgid, |
| msgid, broadcast, |
| source_address, source_lun); |
| |
| /* Save the receive message so we can use it |
| to deliver the response. */ |
| smi_msg->user_data = recv_msg; |
| } else { |
| /* It's a command, so get a sequence for it. */ |
| |
| spin_lock_irqsave(&(intf->seq_lock), flags); |
| |
| spin_lock(&intf->counter_lock); |
| intf->sent_ipmb_commands++; |
| spin_unlock(&intf->counter_lock); |
| |
| /* Create a sequence number with a 1 second |
| timeout and 4 retries. */ |
| rv = intf_next_seq(intf, |
| recv_msg, |
| retry_time_ms, |
| retries, |
| broadcast, |
| &ipmb_seq, |
| &seqid); |
| if (rv) { |
| /* We have used up all the sequence numbers, |
| probably, so abort. */ |
| spin_unlock_irqrestore(&(intf->seq_lock), |
| flags); |
| goto out_err; |
| } |
| |
| /* Store the sequence number in the message, |
| so that when the send message response |
| comes back we can start the timer. */ |
| format_ipmb_msg(smi_msg, msg, ipmb_addr, |
| STORE_SEQ_IN_MSGID(ipmb_seq, seqid), |
| ipmb_seq, broadcast, |
| source_address, source_lun); |
| |
| /* Copy the message into the recv message data, so we |
| can retransmit it later if necessary. */ |
| memcpy(recv_msg->msg_data, smi_msg->data, |
| smi_msg->data_size); |
| recv_msg->msg.data = recv_msg->msg_data; |
| recv_msg->msg.data_len = smi_msg->data_size; |
| |
| /* We don't unlock until here, because we need |
| to copy the completed message into the |
| recv_msg before we release the lock. |
| Otherwise, race conditions may bite us. I |
| know that's pretty paranoid, but I prefer |
| to be correct. */ |
| spin_unlock_irqrestore(&(intf->seq_lock), flags); |
| } |
| } else if (addr->addr_type == IPMI_LAN_ADDR_TYPE) { |
| struct ipmi_lan_addr *lan_addr; |
| unsigned char ipmb_seq; |
| long seqid; |
| |
| if (addr->channel >= IPMI_MAX_CHANNELS) { |
| spin_lock_irqsave(&intf->counter_lock, flags); |
| intf->sent_invalid_commands++; |
| spin_unlock_irqrestore(&intf->counter_lock, flags); |
| rv = -EINVAL; |
| goto out_err; |
| } |
| |
| if ((intf->channels[addr->channel].medium |
| != IPMI_CHANNEL_MEDIUM_8023LAN) |
| && (intf->channels[addr->channel].medium |
| != IPMI_CHANNEL_MEDIUM_ASYNC)) |
| { |
| spin_lock_irqsave(&intf->counter_lock, flags); |
| intf->sent_invalid_commands++; |
| spin_unlock_irqrestore(&intf->counter_lock, flags); |
| rv = -EINVAL; |
| goto out_err; |
| } |
| |
| retries = 4; |
| |
| /* Default to 1 second retries. */ |
| if (retry_time_ms == 0) |
| retry_time_ms = 1000; |
| |
| /* 11 for the header and 1 for the checksum. */ |
| if ((msg->data_len + 12) > IPMI_MAX_MSG_LENGTH) { |
| spin_lock_irqsave(&intf->counter_lock, flags); |
| intf->sent_invalid_commands++; |
| spin_unlock_irqrestore(&intf->counter_lock, flags); |
| rv = -EMSGSIZE; |
| goto out_err; |
| } |
| |
| lan_addr = (struct ipmi_lan_addr *) addr; |
| if (lan_addr->lun > 3) { |
| spin_lock_irqsave(&intf->counter_lock, flags); |
| intf->sent_invalid_commands++; |
| spin_unlock_irqrestore(&intf->counter_lock, flags); |
| rv = -EINVAL; |
| goto out_err; |
| } |
| |
| memcpy(&recv_msg->addr, lan_addr, sizeof(*lan_addr)); |
| |
| if (recv_msg->msg.netfn & 0x1) { |
| /* It's a response, so use the user's sequence |
| from msgid. */ |
| spin_lock_irqsave(&intf->counter_lock, flags); |
| intf->sent_lan_responses++; |
| spin_unlock_irqrestore(&intf->counter_lock, flags); |
| format_lan_msg(smi_msg, msg, lan_addr, msgid, |
| msgid, source_lun); |
| |
| /* Save the receive message so we can use it |
| to deliver the response. */ |
| smi_msg->user_data = recv_msg; |
| } else { |
| /* It's a command, so get a sequence for it. */ |
| |
| spin_lock_irqsave(&(intf->seq_lock), flags); |
| |
| spin_lock(&intf->counter_lock); |
| intf->sent_lan_commands++; |
| spin_unlock(&intf->counter_lock); |
| |
| /* Create a sequence number with a 1 second |
| timeout and 4 retries. */ |
| rv = intf_next_seq(intf, |
| recv_msg, |
| retry_time_ms, |
| retries, |
| 0, |
| &ipmb_seq, |
| &seqid); |
| if (rv) { |
| /* We have used up all the sequence numbers, |
| probably, so abort. */ |
| spin_unlock_irqrestore(&(intf->seq_lock), |
| flags); |
| goto out_err; |
| } |
| |
| /* Store the sequence number in the message, |
| so that when the send message response |
| comes back we can start the timer. */ |
| format_lan_msg(smi_msg, msg, lan_addr, |
| STORE_SEQ_IN_MSGID(ipmb_seq, seqid), |
| ipmb_seq, source_lun); |
| |
| /* Copy the message into the recv message data, so we |
| can retransmit it later if necessary. */ |
| memcpy(recv_msg->msg_data, smi_msg->data, |
| smi_msg->data_size); |
| recv_msg->msg.data = recv_msg->msg_data; |
| recv_msg->msg.data_len = smi_msg->data_size; |
| |
| /* We don't unlock until here, because we need |
| to copy the completed message into the |
| recv_msg before we release the lock. |
| Otherwise, race conditions may bite us. I |
| know that's pretty paranoid, but I prefer |
| to be correct. */ |
| spin_unlock_irqrestore(&(intf->seq_lock), flags); |
| } |
| } else { |
| /* Unknown address type. */ |
| spin_lock_irqsave(&intf->counter_lock, flags); |
| intf->sent_invalid_commands++; |
| spin_unlock_irqrestore(&intf->counter_lock, flags); |
| rv = -EINVAL; |
| goto out_err; |
| } |
| |
| #ifdef DEBUG_MSGING |
| { |
| int m; |
| for (m = 0; m < smi_msg->data_size; m++) |
| printk(" %2.2x", smi_msg->data[m]); |
| printk("\n"); |
| } |
| #endif |
| |
| handlers->sender(intf->send_info, smi_msg, priority); |
| rcu_read_unlock(); |
| |
| return 0; |
| |
| out_err: |
| rcu_read_unlock(); |
| ipmi_free_smi_msg(smi_msg); |
| ipmi_free_recv_msg(recv_msg); |
| return rv; |
| } |
| |
| static int check_addr(ipmi_smi_t intf, |
| struct ipmi_addr *addr, |
| unsigned char *saddr, |
| unsigned char *lun) |
| { |
| if (addr->channel >= IPMI_MAX_CHANNELS) |
| return -EINVAL; |
| *lun = intf->channels[addr->channel].lun; |
| *saddr = intf->channels[addr->channel].address; |
| return 0; |
| } |
| |
| int ipmi_request_settime(ipmi_user_t user, |
| struct ipmi_addr *addr, |
| long msgid, |
| struct kernel_ipmi_msg *msg, |
| void *user_msg_data, |
| int priority, |
| int retries, |
| unsigned int retry_time_ms) |
| { |
| unsigned char saddr, lun; |
| int rv; |
| |
| if (!user) |
| return -EINVAL; |
| rv = check_addr(user->intf, addr, &saddr, &lun); |
| if (rv) |
| return rv; |
| return i_ipmi_request(user, |
| user->intf, |
| addr, |
| msgid, |
| msg, |
| user_msg_data, |
| NULL, NULL, |
| priority, |
| saddr, |
| lun, |
| retries, |
| retry_time_ms); |
| } |
| |
| int ipmi_request_supply_msgs(ipmi_user_t user, |
| struct ipmi_addr *addr, |
| long msgid, |
| struct kernel_ipmi_msg *msg, |
| void *user_msg_data, |
| void *supplied_smi, |
| struct ipmi_recv_msg *supplied_recv, |
| int priority) |
| { |
| unsigned char saddr, lun; |
| int rv; |
| |
| if (!user) |
| return -EINVAL; |
| rv = check_addr(user->intf, addr, &saddr, &lun); |
| if (rv) |
| return rv; |
| return i_ipmi_request(user, |
| user->intf, |
| addr, |
| msgid, |
| msg, |
| user_msg_data, |
| supplied_smi, |
| supplied_recv, |
| priority, |
| saddr, |
| lun, |
| -1, 0); |
| } |
| |
| static int ipmb_file_read_proc(char *page, char **start, off_t off, |
| int count, int *eof, void *data) |
| { |
| char *out = (char *) page; |
| ipmi_smi_t intf = data; |
| int i; |
| int rv = 0; |
| |
| for (i = 0; i < IPMI_MAX_CHANNELS; i++) |
| rv += sprintf(out+rv, "%x ", intf->channels[i].address); |
| out[rv-1] = '\n'; /* Replace the final space with a newline */ |
| out[rv] = '\0'; |
| rv++; |
| return rv; |
| } |
| |
| static int version_file_read_proc(char *page, char **start, off_t off, |
| int count, int *eof, void *data) |
| { |
| char *out = (char *) page; |
| ipmi_smi_t intf = data; |
| |
| return sprintf(out, "%d.%d\n", |
| ipmi_version_major(&intf->bmc->id), |
| ipmi_version_minor(&intf->bmc->id)); |
| } |
| |
| static int stat_file_read_proc(char *page, char **start, off_t off, |
| int count, int *eof, void *data) |
| { |
| char *out = (char *) page; |
| ipmi_smi_t intf = data; |
| |
| out += sprintf(out, "sent_invalid_commands: %d\n", |
| intf->sent_invalid_commands); |
| out += sprintf(out, "sent_local_commands: %d\n", |
| intf->sent_local_commands); |
| out += sprintf(out, "handled_local_responses: %d\n", |
| intf->handled_local_responses); |
| out += sprintf(out, "unhandled_local_responses: %d\n", |
| intf->unhandled_local_responses); |
| out += sprintf(out, "sent_ipmb_commands: %d\n", |
| intf->sent_ipmb_commands); |
| out += sprintf(out, "sent_ipmb_command_errs: %d\n", |
| intf->sent_ipmb_command_errs); |
| out += sprintf(out, "retransmitted_ipmb_commands: %d\n", |
| intf->retransmitted_ipmb_commands); |
| out += sprintf(out, "timed_out_ipmb_commands: %d\n", |
| intf->timed_out_ipmb_commands); |
| out += sprintf(out, "timed_out_ipmb_broadcasts: %d\n", |
| intf->timed_out_ipmb_broadcasts); |
| out += sprintf(out, "sent_ipmb_responses: %d\n", |
| intf->sent_ipmb_responses); |
| out += sprintf(out, "handled_ipmb_responses: %d\n", |
| intf->handled_ipmb_responses); |
| out += sprintf(out, "invalid_ipmb_responses: %d\n", |
| intf->invalid_ipmb_responses); |
| out += sprintf(out, "unhandled_ipmb_responses: %d\n", |
| intf->unhandled_ipmb_responses); |
| out += sprintf(out, "sent_lan_commands: %d\n", |
| intf->sent_lan_commands); |
| out += sprintf(out, "sent_lan_command_errs: %d\n", |
| intf->sent_lan_command_errs); |
| out += sprintf(out, "retransmitted_lan_commands: %d\n", |
| intf->retransmitted_lan_commands); |
| out += sprintf(out, "timed_out_lan_commands: %d\n", |
| intf->timed_out_lan_commands); |
| out += sprintf(out, "sent_lan_responses: %d\n", |
| intf->sent_lan_responses); |
| out += sprintf(out, "handled_lan_responses: %d\n", |
| intf->handled_lan_responses); |
| out += sprintf(out, "invalid_lan_responses: %d\n", |
| intf->invalid_lan_responses); |
| out += sprintf(out, "unhandled_lan_responses: %d\n", |
| intf->unhandled_lan_responses); |
| out += sprintf(out, "handled_commands: %d\n", |
| intf->handled_commands); |
| out += sprintf(out, "invalid_commands: %d\n", |
| intf->invalid_commands); |
| out += sprintf(out, "unhandled_commands: %d\n", |
| intf->unhandled_commands); |
| out += sprintf(out, "invalid_events: %d\n", |
| intf->invalid_events); |
| out += sprintf(out, "events: %d\n", |
| intf->events); |
| |
| return (out - ((char *) page)); |
| } |
| |
| int ipmi_smi_add_proc_entry(ipmi_smi_t smi, char *name, |
| read_proc_t *read_proc, write_proc_t *write_proc, |
| void *data, struct module *owner) |
| { |
| int rv = 0; |
| #ifdef CONFIG_PROC_FS |
| struct proc_dir_entry *file; |
| struct ipmi_proc_entry *entry; |
| |
| /* Create a list element. */ |
| entry = kmalloc(sizeof(*entry), GFP_KERNEL); |
| if (!entry) |
| return -ENOMEM; |
| entry->name = kmalloc(strlen(name)+1, GFP_KERNEL); |
| if (!entry->name) { |
| kfree(entry); |
| return -ENOMEM; |
| } |
| strcpy(entry->name, name); |
| |
| file = create_proc_entry(name, 0, smi->proc_dir); |
| if (!file) { |
| kfree(entry->name); |
| kfree(entry); |
| rv = -ENOMEM; |
| } else { |
| file->nlink = 1; |
| file->data = data; |
| file->read_proc = read_proc; |
| file->write_proc = write_proc; |
| file->owner = owner; |
| |
| spin_lock(&smi->proc_entry_lock); |
| /* Stick it on the list. */ |
| entry->next = smi->proc_entries; |
| smi->proc_entries = entry; |
| spin_unlock(&smi->proc_entry_lock); |
| } |
| #endif /* CONFIG_PROC_FS */ |
| |
| return rv; |
| } |
| |
| static int add_proc_entries(ipmi_smi_t smi, int num) |
| { |
| int rv = 0; |
| |
| #ifdef CONFIG_PROC_FS |
| sprintf(smi->proc_dir_name, "%d", num); |
| smi->proc_dir = proc_mkdir(smi->proc_dir_name, proc_ipmi_root); |
| if (!smi->proc_dir) |
| rv = -ENOMEM; |
| else { |
| smi->proc_dir->owner = THIS_MODULE; |
| } |
| |
| if (rv == 0) |
| rv = ipmi_smi_add_proc_entry(smi, "stats", |
| stat_file_read_proc, NULL, |
| smi, THIS_MODULE); |
| |
| if (rv == 0) |
| rv = ipmi_smi_add_proc_entry(smi, "ipmb", |
| ipmb_file_read_proc, NULL, |
| smi, THIS_MODULE); |
| |
| if (rv == 0) |
| rv = ipmi_smi_add_proc_entry(smi, "version", |
| version_file_read_proc, NULL, |
| smi, THIS_MODULE); |
| #endif /* CONFIG_PROC_FS */ |
| |
| return rv; |
| } |
| |
| static void remove_proc_entries(ipmi_smi_t smi) |
| { |
| #ifdef CONFIG_PROC_FS |
| struct ipmi_proc_entry *entry; |
| |
| spin_lock(&smi->proc_entry_lock); |
| while (smi->proc_entries) { |
| entry = smi->proc_entries; |
| smi->proc_entries = entry->next; |
| |
| remove_proc_entry(entry->name, smi->proc_dir); |
| kfree(entry->name); |
| kfree(entry); |
| } |
| spin_unlock(&smi->proc_entry_lock); |
| remove_proc_entry(smi->proc_dir_name, proc_ipmi_root); |
| #endif /* CONFIG_PROC_FS */ |
| } |
| |
| static int __find_bmc_guid(struct device *dev, void *data) |
| { |
| unsigned char *id = data; |
| struct bmc_device *bmc = dev_get_drvdata(dev); |
| return memcmp(bmc->guid, id, 16) == 0; |
| } |
| |
| static struct bmc_device *ipmi_find_bmc_guid(struct device_driver *drv, |
| unsigned char *guid) |
| { |
| struct device *dev; |
| |
| dev = driver_find_device(drv, NULL, guid, __find_bmc_guid); |
| if (dev) |
| return dev_get_drvdata(dev); |
| else |
| return NULL; |
| } |
| |
| struct prod_dev_id { |
| unsigned int product_id; |
| unsigned char device_id; |
| }; |
| |
| static int __find_bmc_prod_dev_id(struct device *dev, void *data) |
| { |
| struct prod_dev_id *id = data; |
| struct bmc_device *bmc = dev_get_drvdata(dev); |
| |
| return (bmc->id.product_id == id->product_id |
| && bmc->id.device_id == id->device_id); |
| } |
| |
| static struct bmc_device *ipmi_find_bmc_prod_dev_id( |
| struct device_driver *drv, |
| unsigned int product_id, unsigned char device_id) |
| { |
| struct prod_dev_id id = { |
| .product_id = product_id, |
| .device_id = device_id, |
| }; |
| struct device *dev; |
| |
| dev = driver_find_device(drv, NULL, &id, __find_bmc_prod_dev_id); |
| if (dev) |
| return dev_get_drvdata(dev); |
| else |
| return NULL; |
| } |
| |
| static ssize_t device_id_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct bmc_device *bmc = dev_get_drvdata(dev); |
| |
| return snprintf(buf, 10, "%u\n", bmc->id.device_id); |
| } |
| |
| static ssize_t provides_dev_sdrs_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct bmc_device *bmc = dev_get_drvdata(dev); |
| |
| return snprintf(buf, 10, "%u\n", |
| (bmc->id.device_revision & 0x80) >> 7); |
| } |
| |
| static ssize_t revision_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct bmc_device *bmc = dev_get_drvdata(dev); |
| |
| return snprintf(buf, 20, "%u\n", |
| bmc->id.device_revision & 0x0F); |
| } |
| |
| static ssize_t firmware_rev_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct bmc_device *bmc = dev_get_drvdata(dev); |
| |
| return snprintf(buf, 20, "%u.%x\n", bmc->id.firmware_revision_1, |
| bmc->id.firmware_revision_2); |
| } |
| |
| static ssize_t ipmi_version_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct bmc_device *bmc = dev_get_drvdata(dev); |
| |
| return snprintf(buf, 20, "%u.%u\n", |
| ipmi_version_major(&bmc->id), |
| ipmi_version_minor(&bmc->id)); |
| } |
| |
| static ssize_t add_dev_support_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct bmc_device *bmc = dev_get_drvdata(dev); |
| |
| return snprintf(buf, 10, "0x%02x\n", |
| bmc->id.additional_device_support); |
| } |
| |
| static ssize_t manufacturer_id_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct bmc_device *bmc = dev_get_drvdata(dev); |
| |
| return snprintf(buf, 20, "0x%6.6x\n", bmc->id.manufacturer_id); |
| } |
| |
| static ssize_t product_id_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct bmc_device *bmc = dev_get_drvdata(dev); |
| |
| return snprintf(buf, 10, "0x%4.4x\n", bmc->id.product_id); |
| } |
| |
| static ssize_t aux_firmware_rev_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct bmc_device *bmc = dev_get_drvdata(dev); |
| |
| return snprintf(buf, 21, "0x%02x 0x%02x 0x%02x 0x%02x\n", |
| bmc->id.aux_firmware_revision[3], |
| bmc->id.aux_firmware_revision[2], |
| bmc->id.aux_firmware_revision[1], |
| bmc->id.aux_firmware_revision[0]); |
| } |
| |
| static ssize_t guid_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct bmc_device *bmc = dev_get_drvdata(dev); |
| |
| return snprintf(buf, 100, "%Lx%Lx\n", |
| (long long) bmc->guid[0], |
| (long long) bmc->guid[8]); |
| } |
| |
| static void remove_files(struct bmc_device *bmc) |
| { |
| if (!bmc->dev) |
| return; |
| |
| device_remove_file(&bmc->dev->dev, |
| &bmc->device_id_attr); |
| device_remove_file(&bmc->dev->dev, |
| &bmc->provides_dev_sdrs_attr); |
| device_remove_file(&bmc->dev->dev, |
| &bmc->revision_attr); |
| device_remove_file(&bmc->dev->dev, |
| &bmc->firmware_rev_attr); |
| device_remove_file(&bmc->dev->dev, |
| &bmc->version_attr); |
| device_remove_file(&bmc->dev->dev, |
| &bmc->add_dev_support_attr); |
| device_remove_file(&bmc->dev->dev, |
| &bmc->manufacturer_id_attr); |
| device_remove_file(&bmc->dev->dev, |
| &bmc->product_id_attr); |
| |
| if (bmc->id.aux_firmware_revision_set) |
| device_remove_file(&bmc->dev->dev, |
| &bmc->aux_firmware_rev_attr); |
| if (bmc->guid_set) |
| device_remove_file(&bmc->dev->dev, |
| &bmc->guid_attr); |
| } |
| |
| static void |
| cleanup_bmc_device(struct kref *ref) |
| { |
| struct bmc_device *bmc; |
| |
| bmc = container_of(ref, struct bmc_device, refcount); |
| |
| remove_files(bmc); |
| if (bmc->dev) |
| platform_device_unregister(bmc->dev); |
| kfree(bmc); |
| } |
| |
| static void ipmi_bmc_unregister(ipmi_smi_t intf) |
| { |
| struct bmc_device *bmc = intf->bmc; |
| |
| if (intf->sysfs_name) { |
| sysfs_remove_link(&intf->si_dev->kobj, intf->sysfs_name); |
| kfree(intf->sysfs_name); |
| intf->sysfs_name = NULL; |
| } |
| if (intf->my_dev_name) { |
| sysfs_remove_link(&bmc->dev->dev.kobj, intf->my_dev_name); |
| kfree(intf->my_dev_name); |
| intf->my_dev_name = NULL; |
| } |
| |
| mutex_lock(&ipmidriver_mutex); |
| kref_put(&bmc->refcount, cleanup_bmc_device); |
| intf->bmc = NULL; |
| mutex_unlock(&ipmidriver_mutex); |
| } |
| |
| static int create_files(struct bmc_device *bmc) |
| { |
| int err; |
| |
| bmc->device_id_attr.attr.name = "device_id"; |
| bmc->device_id_attr.attr.owner = THIS_MODULE; |
| bmc->device_id_attr.attr.mode = S_IRUGO; |
| bmc->device_id_attr.show = device_id_show; |
| |
| bmc->provides_dev_sdrs_attr.attr.name = "provides_device_sdrs"; |
| bmc->provides_dev_sdrs_attr.attr.owner = THIS_MODULE; |
| bmc->provides_dev_sdrs_attr.attr.mode = S_IRUGO; |
| bmc->provides_dev_sdrs_attr.show = provides_dev_sdrs_show; |
| |
| bmc->revision_attr.attr.name = "revision"; |
| bmc->revision_attr.attr.owner = THIS_MODULE; |
| bmc->revision_attr.attr.mode = S_IRUGO; |
| bmc->revision_attr.show = revision_show; |
| |
| bmc->firmware_rev_attr.attr.name = "firmware_revision"; |
| bmc->firmware_rev_attr.attr.owner = THIS_MODULE; |
| bmc->firmware_rev_attr.attr.mode = S_IRUGO; |
| bmc->firmware_rev_attr.show = firmware_rev_show; |
| |
| bmc->version_attr.attr.name = "ipmi_version"; |
| bmc->version_attr.attr.owner = THIS_MODULE; |
| bmc->version_attr.attr.mode = S_IRUGO; |
| bmc->version_attr.show = ipmi_version_show; |
| |
| bmc->add_dev_support_attr.attr.name = "additional_device_support"; |
| bmc->add_dev_support_attr.attr.owner = THIS_MODULE; |
| bmc->add_dev_support_attr.attr.mode = S_IRUGO; |
| bmc->add_dev_support_attr.show = add_dev_support_show; |
| |
| bmc->manufacturer_id_attr.attr.name = "manufacturer_id"; |
| bmc->manufacturer_id_attr.attr.owner = THIS_MODULE; |
| bmc->manufacturer_id_attr.attr.mode = S_IRUGO; |
| bmc->manufacturer_id_attr.show = manufacturer_id_show; |
| |
| bmc->product_id_attr.attr.name = "product_id"; |
| bmc->product_id_attr.attr.owner = THIS_MODULE; |
| bmc->product_id_attr.attr.mode = S_IRUGO; |
| bmc->product_id_attr.show = product_id_show; |
| |
| bmc->guid_attr.attr.name = "guid"; |
| bmc->guid_attr.attr.owner = THIS_MODULE; |
| bmc->guid_attr.attr.mode = S_IRUGO; |
| bmc->guid_attr.show = guid_show; |
| |
| bmc->aux_firmware_rev_attr.attr.name = "aux_firmware_revision"; |
| bmc->aux_firmware_rev_attr.attr.owner = THIS_MODULE; |
| bmc->aux_firmware_rev_attr.attr.mode = S_IRUGO; |
| bmc->aux_firmware_rev_attr.show = aux_firmware_rev_show; |
| |
| err = device_create_file(&bmc->dev->dev, |
| &bmc->device_id_attr); |
| if (err) goto out; |
| err = device_create_file(&bmc->dev->dev, |
| &bmc->provides_dev_sdrs_attr); |
| if (err) goto out_devid; |
| err = device_create_file(&bmc->dev->dev, |
| &bmc->revision_attr); |
| if (err) goto out_sdrs; |
| err = device_create_file(&bmc->dev->dev, |
| &bmc->firmware_rev_attr); |
| if (err) goto out_rev; |
| err = device_create_file(&bmc->dev->dev, |
| &bmc->version_attr); |
| if (err) goto out_firm; |
| err = device_create_file(&bmc->dev->dev, |
| &bmc->add_dev_support_attr); |
| if (err) goto out_version; |
| err = device_create_file(&bmc->dev->dev, |
| &bmc->manufacturer_id_attr); |
| if (err) goto out_add_dev; |
| err = device_create_file(&bmc->dev->dev, |
| &bmc->product_id_attr); |
| if (err) goto out_manu; |
| if (bmc->id.aux_firmware_revision_set) { |
| err = device_create_file(&bmc->dev->dev, |
| &bmc->aux_firmware_rev_attr); |
| if (err) goto out_prod_id; |
| } |
| if (bmc->guid_set) { |
| err = device_create_file(&bmc->dev->dev, |
| &bmc->guid_attr); |
| if (err) goto out_aux_firm; |
| } |
| |
| return 0; |
| |
| out_aux_firm: |
| if (bmc->id.aux_firmware_revision_set) |
| device_remove_file(&bmc->dev->dev, |
| &bmc->aux_firmware_rev_attr); |
| out_prod_id: |
| device_remove_file(&bmc->dev->dev, |
| &bmc->product_id_attr); |
| out_manu: |
| device_remove_file(&bmc->dev->dev, |
| &bmc->manufacturer_id_attr); |
| out_add_dev: |
| device_remove_file(&bmc->dev->dev, |
| &bmc->add_dev_support_attr); |
| out_version: |
| device_remove_file(&bmc->dev->dev, |
| &bmc->version_attr); |
| out_firm: |
| device_remove_file(&bmc->dev->dev, |
| &bmc->firmware_rev_attr); |
| out_rev: |
| device_remove_file(&bmc->dev->dev, |
| &bmc->revision_attr); |
| out_sdrs: |
| device_remove_file(&bmc->dev->dev, |
| &bmc->provides_dev_sdrs_attr); |
| out_devid: |
| device_remove_file(&bmc->dev->dev, |
| &bmc->device_id_attr); |
| out: |
| return err; |
| } |
| |
| static int ipmi_bmc_register(ipmi_smi_t intf, int ifnum, |
| const char *sysfs_name) |
| { |
| int rv; |
| struct bmc_device *bmc = intf->bmc; |
| struct bmc_device *old_bmc; |
| int size; |
| char dummy[1]; |
| |
| mutex_lock(&ipmidriver_mutex); |
| |
| /* |
| * Try to find if there is an bmc_device struct |
| * representing the interfaced BMC already |
| */ |
| if (bmc->guid_set) |
| old_bmc = ipmi_find_bmc_guid(&ipmidriver, bmc->guid); |
| else |
| old_bmc = ipmi_find_bmc_prod_dev_id(&ipmidriver, |
| bmc->id.product_id, |
| bmc->id.device_id); |
| |
| /* |
| * If there is already an bmc_device, free the new one, |
| * otherwise register the new BMC device |
| */ |
| if (old_bmc) { |
| kfree(bmc); |
| intf->bmc = old_bmc; |
| bmc = old_bmc; |
| |
| kref_get(&bmc->refcount); |
| mutex_unlock(&ipmidriver_mutex); |
| |
| printk(KERN_INFO |
| "ipmi: interfacing existing BMC (man_id: 0x%6.6x," |
| " prod_id: 0x%4.4x, dev_id: 0x%2.2x)\n", |
| bmc->id.manufacturer_id, |
| bmc->id.product_id, |
| bmc->id.device_id); |
| } else { |
| char name[14]; |
| unsigned char orig_dev_id = bmc->id.device_id; |
| int warn_printed = 0; |
| |
| snprintf(name, sizeof(name), |
| "ipmi_bmc.%4.4x", bmc->id.product_id); |
| |
| while (ipmi_find_bmc_prod_dev_id(&ipmidriver, |
| bmc->id.product_id, |
| bmc->id.device_id)) |
| { |
| if (!warn_printed) { |
| printk(KERN_WARNING PFX |
| "This machine has two different BMCs" |
| " with the same product id and device" |
| " id. This is an error in the" |
| " firmware, but incrementing the" |
| " device id to work around the problem." |
| " Prod ID = 0x%x, Dev ID = 0x%x\n", |
| bmc->id.product_id, bmc->id.device_id); |
| warn_printed = 1; |
| } |
| bmc->id.device_id++; /* Wraps at 255 */ |
| if (bmc->id.device_id == orig_dev_id) { |
| printk(KERN_ERR PFX |
| "Out of device ids!\n"); |
| break; |
| } |
| } |
| |
| bmc->dev = platform_device_alloc(name, bmc->id.device_id); |
| if (!bmc->dev) { |
| mutex_unlock(&ipmidriver_mutex); |
| printk(KERN_ERR |
| "ipmi_msghandler:" |
| " Unable to allocate platform device\n"); |
| return -ENOMEM; |
| } |
| bmc->dev->dev.driver = &ipmidriver; |
| dev_set_drvdata(&bmc->dev->dev, bmc); |
| kref_init(&bmc->refcount); |
| |
| rv = platform_device_add(bmc->dev); |
| mutex_unlock(&ipmidriver_mutex); |
| if (rv) { |
| platform_device_put(bmc->dev); |
| bmc->dev = NULL; |
| printk(KERN_ERR |
| "ipmi_msghandler:" |
| " Unable to register bmc device: %d\n", |
| rv); |
| /* Don't go to out_err, you can only do that if |
| the device is registered already. */ |
| return rv; |
| } |
| |
| rv = create_files(bmc); |
| if (rv) { |
| mutex_lock(&ipmidriver_mutex); |
| platform_device_unregister(bmc->dev); |
| mutex_unlock(&ipmidriver_mutex); |
| |
| return rv; |
| } |
| |
| printk(KERN_INFO |
| "ipmi: Found new BMC (man_id: 0x%6.6x, " |
| " prod_id: 0x%4.4x, dev_id: 0x%2.2x)\n", |
| bmc->id.manufacturer_id, |
| bmc->id.product_id, |
| bmc->id.device_id); |
| } |
| |
| /* |
| * create symlink from system interface device to bmc device |
| * and back. |
| */ |
| intf->sysfs_name = kstrdup(sysfs_name, GFP_KERNEL); |
| if (!intf->sysfs_name) { |
| rv = -ENOMEM; |
| printk(KERN_ERR |
| "ipmi_msghandler: allocate link to BMC: %d\n", |
| rv); |
| goto out_err; |
| } |
| |
| rv = sysfs_create_link(&intf->si_dev->kobj, |
| &bmc->dev->dev.kobj, intf->sysfs_name); |
| if (rv) { |
| kfree(intf->sysfs_name); |
| intf->sysfs_name = NULL; |
| printk(KERN_ERR |
| "ipmi_msghandler: Unable to create bmc symlink: %d\n", |
| rv); |
| goto out_err; |
| } |
| |
| size = snprintf(dummy, 0, "ipmi%d", ifnum); |
| intf->my_dev_name = kmalloc(size+1, GFP_KERNEL); |
| if (!intf->my_dev_name) { |
| kfree(intf->sysfs_name); |
| intf->sysfs_name = NULL; |
| rv = -ENOMEM; |
| printk(KERN_ERR |
| "ipmi_msghandler: allocate link from BMC: %d\n", |
| rv); |
| goto out_err; |
| } |
| snprintf(intf->my_dev_name, size+1, "ipmi%d", ifnum); |
| |
| rv = sysfs_create_link(&bmc->dev->dev.kobj, &intf->si_dev->kobj, |
| intf->my_dev_name); |
| if (rv) { |
| kfree(intf->sysfs_name); |
| intf->sysfs_name = NULL; |
| kfree(intf->my_dev_name); |
| intf->my_dev_name = NULL; |
| printk(KERN_ERR |
| "ipmi_msghandler:" |
| " Unable to create symlink to bmc: %d\n", |
| rv); |
| goto out_err; |
| } |
| |
| return 0; |
| |
| out_err: |
| ipmi_bmc_unregister(intf); |
| return rv; |
| } |
| |
| static int |
| send_guid_cmd(ipmi_smi_t intf, int chan) |
| { |
| struct kernel_ipmi_msg msg; |
| struct ipmi_system_interface_addr si; |
| |
| si.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; |
| si.channel = IPMI_BMC_CHANNEL; |
| si.lun = 0; |
| |
| msg.netfn = IPMI_NETFN_APP_REQUEST; |
| msg.cmd = IPMI_GET_DEVICE_GUID_CMD; |
| msg.data = NULL; |
| msg.data_len = 0; |
| return i_ipmi_request(NULL, |
| intf, |
| (struct ipmi_addr *) &si, |
| 0, |
| &msg, |
| intf, |
| NULL, |
| NULL, |
| 0, |
| intf->channels[0].address, |
| intf->channels[0].lun, |
| -1, 0); |
| } |
| |
| static void |
| guid_handler(ipmi_smi_t intf, struct ipmi_recv_msg *msg) |
| { |
| if ((msg->addr.addr_type != IPMI_SYSTEM_INTERFACE_ADDR_TYPE) |
| || (msg->msg.netfn != IPMI_NETFN_APP_RESPONSE) |
| || (msg->msg.cmd != IPMI_GET_DEVICE_GUID_CMD)) |
| /* Not for me */ |
| return; |
| |
| if (msg->msg.data[0] != 0) { |
| /* Error from getting the GUID, the BMC doesn't have one. */ |
| intf->bmc->guid_set = 0; |
| goto out; |
| } |
| |
| if (msg->msg.data_len < 17) { |
| intf->bmc->guid_set = 0; |
| printk(KERN_WARNING PFX |
| "guid_handler: The GUID response from the BMC was too" |
| " short, it was %d but should have been 17. Assuming" |
| " GUID is not available.\n", |
| msg->msg.data_len); |
| goto out; |
| } |
| |
| memcpy(intf->bmc->guid, msg->msg.data, 16); |
| intf->bmc->guid_set = 1; |
| out: |
| wake_up(&intf->waitq); |
| } |
| |
| static void |
| get_guid(ipmi_smi_t intf) |
| { |
| int rv; |
| |
| intf->bmc->guid_set = 0x2; |
| intf->null_user_handler = guid_handler; |
| rv = send_guid_cmd(intf, 0); |
| if (rv) |
| /* Send failed, no GUID available. */ |
| intf->bmc->guid_set = 0; |
| wait_event(intf->waitq, intf->bmc->guid_set != 2); |
| intf->null_user_handler = NULL; |
| } |
| |
| static int |
| send_channel_info_cmd(ipmi_smi_t intf, int chan) |
| { |
| struct kernel_ipmi_msg msg; |
| unsigned char data[1]; |
| struct ipmi_system_interface_addr si; |
| |
| si.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; |
| si.channel = IPMI_BMC_CHANNEL; |
| si.lun = 0; |
| |
| msg.netfn = IPMI_NETFN_APP_REQUEST; |
| msg.cmd = IPMI_GET_CHANNEL_INFO_CMD; |
| msg.data = data; |
| msg.data_len = 1; |
| data[0] = chan; |
| return i_ipmi_request(NULL, |
| intf, |
| (struct ipmi_addr *) &si, |
| 0, |
| &msg, |
| intf, |
| NULL, |
| NULL, |
| 0, |
| intf->channels[0].address, |
| intf->channels[0].lun, |
| -1, 0); |
| } |
| |
| static void |
| channel_handler(ipmi_smi_t intf, struct ipmi_recv_msg *msg) |
| { |
| int rv = 0; |
| int chan; |
| |
| if ((msg->addr.addr_type == IPMI_SYSTEM_INTERFACE_ADDR_TYPE) |
| && (msg->msg.netfn == IPMI_NETFN_APP_RESPONSE) |
| && (msg->msg.cmd == IPMI_GET_CHANNEL_INFO_CMD)) |
| { |
| /* It's the one we want */ |
| if (msg->msg.data[0] != 0) { |
| /* Got an error from the channel, just go on. */ |
| |
| if (msg->msg.data[0] == IPMI_INVALID_COMMAND_ERR) { |
| /* If the MC does not support this |
| command, that is legal. We just |
| assume it has one IPMB at channel |
| zero. */ |
| intf->channels[0].medium |
| = IPMI_CHANNEL_MEDIUM_IPMB; |
| intf->channels[0].protocol |
| = IPMI_CHANNEL_PROTOCOL_IPMB; |
| rv = -ENOSYS; |
| |
| intf->curr_channel = IPMI_MAX_CHANNELS; |
| wake_up(&intf->waitq); |
| goto out; |
| } |
| goto next_channel; |
| } |
| if (msg->msg.data_len < 4) { |
| /* Message not big enough, just go on. */ |
| goto next_channel; |
| } |
| chan = intf->curr_channel; |
| intf->channels[chan].medium = msg->msg.data[2] & 0x7f; |
| intf->channels[chan].protocol = msg->msg.data[3] & 0x1f; |
| |
| next_channel: |
| intf->curr_channel++; |
| if (intf->curr_channel >= IPMI_MAX_CHANNELS) |
| wake_up(&intf->waitq); |
| else |
| rv = send_channel_info_cmd(intf, intf->curr_channel); |
| |
| if (rv) { |
| /* Got an error somehow, just give up. */ |
| intf->curr_channel = IPMI_MAX_CHANNELS; |
| wake_up(&intf->waitq); |
| |
| printk(KERN_WARNING PFX |
| "Error sending channel information: %d\n", |
| rv); |
| } |
| } |
| out: |
| return; |
| } |
| |
| int ipmi_register_smi(struct ipmi_smi_handlers *handlers, |
| void *send_info, |
| struct ipmi_device_id *device_id, |
| struct device *si_dev, |
| const char *sysfs_name, |
| unsigned char slave_addr) |
| { |
| int i, j; |
| int rv; |
| ipmi_smi_t intf; |
| ipmi_smi_t tintf; |
| struct list_head *link; |
| |
| /* Make sure the driver is actually initialized, this handles |
| problems with initialization order. */ |
| if (!initialized) { |
| rv = ipmi_init_msghandler(); |
| if (rv) |
| return rv; |
| /* The init code doesn't return an error if it was turned |
| off, but it won't initialize. Check that. */ |
| if (!initialized) |
| return -ENODEV; |
| } |
| |
| intf = kmalloc(sizeof(*intf), GFP_KERNEL); |
| if (!intf) |
| return -ENOMEM; |
| memset(intf, 0, sizeof(*intf)); |
| |
| intf->ipmi_version_major = ipmi_version_major(device_id); |
| intf->ipmi_version_minor = ipmi_version_minor(device_id); |
| |
| intf->bmc = kzalloc(sizeof(*intf->bmc), GFP_KERNEL); |
| if (!intf->bmc) { |
| kfree(intf); |
| return -ENOMEM; |
| } |
| intf->intf_num = -1; /* Mark it invalid for now. */ |
| kref_init(&intf->refcount); |
| intf->bmc->id = *device_id; |
| intf->si_dev = si_dev; |
| for (j = 0; j < IPMI_MAX_CHANNELS; j++) { |
| intf->channels[j].address = IPMI_BMC_SLAVE_ADDR; |
| intf->channels[j].lun = 2; |
| } |
| if (slave_addr != 0) |
| intf->channels[0].address = slave_addr; |
| INIT_LIST_HEAD(&intf->users); |
| intf->handlers = handlers; |
| intf->send_info = send_info; |
| spin_lock_init(&intf->seq_lock); |
| for (j = 0; j < IPMI_IPMB_NUM_SEQ; j++) { |
| intf->seq_table[j].inuse = 0; |
| intf->seq_table[j].seqid = 0; |
| } |
| intf->curr_seq = 0; |
| #ifdef CONFIG_PROC_FS |
| spin_lock_init(&intf->proc_entry_lock); |
| #endif |
| spin_lock_init(&intf->waiting_msgs_lock); |
| INIT_LIST_HEAD(&intf->waiting_msgs); |
| spin_lock_init(&intf->events_lock); |
| INIT_LIST_HEAD(&intf->waiting_events); |
| intf->waiting_events_count = 0; |
| mutex_init(&intf->cmd_rcvrs_mutex); |
| spin_lock_init(&intf->maintenance_mode_lock); |
| INIT_LIST_HEAD(&intf->cmd_rcvrs); |
| init_waitqueue_head(&intf->waitq); |
| |
| spin_lock_init(&intf->counter_lock); |
| intf->proc_dir = NULL; |
| |
| mutex_lock(&smi_watchers_mutex); |
| mutex_lock(&ipmi_interfaces_mutex); |
| /* Look for a hole in the numbers. */ |
| i = 0; |
| link = &ipmi_interfaces; |
| list_for_each_entry_rcu(tintf, &ipmi_interfaces, link) { |
| if (tintf->intf_num != i) { |
| link = &tintf->link; |
| break; |
| } |
| i++; |
| } |
| /* Add the new interface in numeric order. */ |
| if (i == 0) |
| list_add_rcu(&intf->link, &ipmi_interfaces); |
| else |
| list_add_tail_rcu(&intf->link, link); |
| |
| rv = handlers->start_processing(send_info, intf); |
| if (rv) |
| goto out; |
| |
| get_guid(intf); |
| |
| if ((intf->ipmi_version_major > 1) |
| || ((intf->ipmi_version_major == 1) |
| && (intf->ipmi_version_minor >= 5))) |
| { |
| /* Start scanning the channels to see what is |
| available. */ |
| intf->null_user_handler = channel_handler; |
| intf->curr_channel = 0; |
| rv = send_channel_info_cmd(intf, 0); |
| if (rv) |
| goto out; |
| |
| /* Wait for the channel info to be read. */ |
| wait_event(intf->waitq, |
| intf->curr_channel >= IPMI_MAX_CHANNELS); |
| intf->null_user_handler = NULL; |
| } else { |
| /* Assume a single IPMB channel at zero. */ |
| intf->channels[0].medium = IPMI_CHANNEL_MEDIUM_IPMB; |
| intf->channels[0].protocol = IPMI_CHANNEL_PROTOCOL_IPMB; |
| } |
| |
| if (rv == 0) |
| rv = add_proc_entries(intf, i); |
| |
| rv = ipmi_bmc_register(intf, i, sysfs_name); |
| |
| out: |
| if (rv) { |
| if (intf->proc_dir) |
| remove_proc_entries(intf); |
| intf->handlers = NULL; |
| list_del_rcu(&intf->link); |
| mutex_unlock(&ipmi_interfaces_mutex); |
| mutex_unlock(&smi_watchers_mutex); |
| synchronize_rcu(); |
| kref_put(&intf->refcount, intf_free); |
| } else { |
| /* After this point the interface is legal to use. */ |
| intf->intf_num = i; |
| mutex_unlock(&ipmi_interfaces_mutex); |
| call_smi_watchers(i, intf->si_dev); |
| mutex_unlock(&smi_watchers_mutex); |
| } |
| |
| return rv; |
| } |
| |
| static void cleanup_smi_msgs(ipmi_smi_t intf) |
| { |
| int i; |
| struct seq_table *ent; |
| |
| /* No need for locks, the interface is down. */ |
| for (i = 0; i < IPMI_IPMB_NUM_SEQ; i++) { |
| ent = &(intf->seq_table[i]); |
| if (!ent->inuse) |
| continue; |
| deliver_err_response(ent->recv_msg, IPMI_ERR_UNSPECIFIED); |
| } |
| } |
| |
| int ipmi_unregister_smi(ipmi_smi_t intf) |
| { |
| struct ipmi_smi_watcher *w; |
| int intf_num = intf->intf_num; |
| |
| ipmi_bmc_unregister(intf); |
| |
| mutex_lock(&smi_watchers_mutex); |
| mutex_lock(&ipmi_interfaces_mutex); |
| intf->intf_num = -1; |
| intf->handlers = NULL; |
| list_del_rcu(&intf->link); |
| mutex_unlock(&ipmi_interfaces_mutex); |
| synchronize_rcu(); |
| |
| cleanup_smi_msgs(intf); |
| |
| remove_proc_entries(intf); |
| |
| /* Call all the watcher interfaces to tell them that |
| an interface is gone. */ |
| list_for_each_entry(w, &smi_watchers, link) |
| w->smi_gone(intf_num); |
| mutex_unlock(&smi_watchers_mutex); |
| |
| kref_put(&intf->refcount, intf_free); |
| return 0; |
| } |
| |
| static int handle_ipmb_get_msg_rsp(ipmi_smi_t intf, |
| struct ipmi_smi_msg *msg) |
| { |
| struct ipmi_ipmb_addr ipmb_addr; |
| struct ipmi_recv_msg *recv_msg; |
| unsigned long flags; |
| |
| |
| /* This is 11, not 10, because the response must contain a |
| * completion code. */ |
| if (msg->rsp_size < 11) { |
| /* Message not big enough, just ignore it. */ |
| spin_lock_irqsave(&intf->counter_lock, flags); |
| intf->invalid_ipmb_responses++; |
| spin_unlock_irqrestore(&intf->counter_lock, flags); |
| return 0; |
| } |
| |
| if (msg->rsp[2] != 0) { |
| /* An error getting the response, just ignore it. */ |
| return 0; |
| } |
| |
| ipmb_addr.addr_type = IPMI_IPMB_ADDR_TYPE; |
| ipmb_addr.slave_addr = msg->rsp[6]; |
| ipmb_addr.channel = msg->rsp[3] & 0x0f; |
| ipmb_addr.lun = msg->rsp[7] & 3; |
| |
| /* It's a response from a remote entity. Look up the sequence |
| number and handle the response. */ |
| if (intf_find_seq(intf, |
| msg->rsp[7] >> 2, |
| msg->rsp[3] & 0x0f, |
| msg->rsp[8], |
| (msg->rsp[4] >> 2) & (~1), |
| (struct ipmi_addr *) &(ipmb_addr), |
| &recv_msg)) |
| { |
| /* We were unable to find the sequence number, |
| so just nuke the message. */ |
| spin_lock_irqsave(&intf->counter_lock, flags); |
| intf->unhandled_ipmb_responses++; |
| spin_unlock_irqrestore(&intf->counter_lock, flags); |
| return 0; |
| } |
| |
| memcpy(recv_msg->msg_data, |
| &(msg->rsp[9]), |
| msg->rsp_size - 9); |
| /* THe other fields matched, so no need to set them, except |
| for netfn, which needs to be the response that was |
| returned, not the request value. */ |
| recv_msg->msg.netfn = msg->rsp[4] >> 2; |
| recv_msg->msg.data = recv_msg->msg_data; |
| recv_msg->msg.data_len = msg->rsp_size - 10; |
| recv_msg->recv_type = IPMI_RESPONSE_RECV_TYPE; |
| spin_lock_irqsave(&intf->counter_lock, flags); |
| intf->handled_ipmb_responses++; |
| spin_unlock_irqrestore(&intf->counter_lock, flags); |
| deliver_response(recv_msg); |
| |
| return 0; |
| } |
| |
| static int handle_ipmb_get_msg_cmd(ipmi_smi_t intf, |
| struct ipmi_smi_msg *msg) |
| { |
| struct cmd_rcvr *rcvr; |
| int rv = 0; |
| unsigned char netfn; |
| unsigned char cmd; |
| unsigned char chan; |
| ipmi_user_t user = NULL; |
| struct ipmi_ipmb_addr *ipmb_addr; |
| struct ipmi_recv_msg *recv_msg; |
| unsigned long flags; |
| struct ipmi_smi_handlers *handlers; |
| |
| if (msg->rsp_size < 10) { |
| /* Message not big enough, just ignore it. */ |
| spin_lock_irqsave(&intf->counter_lock, flags); |
| intf->invalid_commands++; |
| spin_unlock_irqrestore(&intf->counter_lock, flags); |
| return 0; |
| } |
| |
| if (msg->rsp[2] != 0) { |
| /* An error getting the response, just ignore it. */ |
| return 0; |
| } |
| |
| netfn = msg->rsp[4] >> 2; |
| cmd = msg->rsp[8]; |
| chan = msg->rsp[3] & 0xf; |
| |
| rcu_read_lock(); |
| rcvr = find_cmd_rcvr(intf, netfn, cmd, chan); |
| if (rcvr) { |
| user = rcvr->user; |
| kref_get(&user->refcount); |
| } else |
| user = NULL; |
| rcu_read_unlock(); |
| |
| if (user == NULL) { |
| /* We didn't find a user, deliver an error response. */ |
| spin_lock_irqsave(&intf->counter_lock, flags); |
| intf->unhandled_commands++; |
| spin_unlock_irqrestore(&intf->counter_lock, flags); |
| |
| msg->data[0] = (IPMI_NETFN_APP_REQUEST << 2); |
| msg->data[1] = IPMI_SEND_MSG_CMD; |
| msg->data[2] = msg->rsp[3]; |
| msg->data[3] = msg->rsp[6]; |
| msg->data[4] = ((netfn + 1) << 2) | (msg->rsp[7] & 0x3); |
| msg->data[5] = ipmb_checksum(&(msg->data[3]), 2); |
| msg->data[6] = intf->channels[msg->rsp[3] & 0xf].address; |
| /* rqseq/lun */ |
| msg->data[7] = (msg->rsp[7] & 0xfc) | (msg->rsp[4] & 0x3); |
| msg->data[8] = msg->rsp[8]; /* cmd */ |
| msg->data[9] = IPMI_INVALID_CMD_COMPLETION_CODE; |
| msg->data[10] = ipmb_checksum(&(msg->data[6]), 4); |
| msg->data_size = 11; |
| |
| #ifdef DEBUG_MSGING |
| { |
| int m; |
| printk("Invalid command:"); |
| for (m = 0; m < msg->data_size; m++) |
| printk(" %2.2x", msg->data[m]); |
| printk("\n"); |
| } |
| #endif |
| rcu_read_lock(); |
| handlers = intf->handlers; |
| if (handlers) { |
| handlers->sender(intf->send_info, msg, 0); |
| /* We used the message, so return the value |
| that causes it to not be freed or |
| queued. */ |
| rv = -1; |
| } |
| rcu_read_unlock(); |
| } else { |
| /* Deliver the message to the user. */ |
| spin_lock_irqsave(&intf->counter_lock, flags); |
| intf->handled_commands++; |
| spin_unlock_irqrestore(&intf->counter_lock, flags); |
| |
| recv_msg = ipmi_alloc_recv_msg(); |
| if (!recv_msg) { |
| /* We couldn't allocate memory for the |
| message, so requeue it for handling |
| later. */ |
| rv = 1; |
| kref_put(&user->refcount, free_user); |
| } else { |
| /* Extract the source address from the data. */ |
| ipmb_addr = (struct ipmi_ipmb_addr *) &recv_msg->addr; |
| ipmb_addr->addr_type = IPMI_IPMB_ADDR_TYPE; |
| ipmb_addr->slave_addr = msg->rsp[6]; |
| ipmb_addr->lun = msg->rsp[7] & 3; |
| ipmb_addr->channel = msg->rsp[3] & 0xf; |
| |
| /* Extract the rest of the message information |
| from the IPMB header.*/ |
| recv_msg->user = user; |
| recv_msg->recv_type = IPMI_CMD_RECV_TYPE; |
| recv_msg->msgid = msg->rsp[7] >> 2; |
| recv_msg->msg.netfn = msg->rsp[4] >> 2; |
| recv_msg->msg.cmd = msg->rsp[8]; |
| recv_msg->msg.data = recv_msg->msg_data; |
| |
| /* We chop off 10, not 9 bytes because the checksum |
| at the end also needs to be removed. */ |
| recv_msg->msg.data_len = msg->rsp_size - 10; |
| memcpy(recv_msg->msg_data, |
| &(msg->rsp[9]), |
| msg->rsp_size - 10); |
| deliver_response(recv_msg); |
| } |
| } |
| |
| return rv; |
| } |
| |
| static int handle_lan_get_msg_rsp(ipmi_smi_t intf, |
| struct ipmi_smi_msg *msg) |
| { |
| struct ipmi_lan_addr lan_addr; |
| struct ipmi_recv_msg *recv_msg; |
| unsigned long flags; |
| |
| |
| /* This is 13, not 12, because the response must contain a |
| * completion code. */ |
| if (msg->rsp_size < 13) { |
| /* Message not big enough, just ignore it. */ |
| spin_lock_irqsave(&intf->counter_lock, flags); |
| intf->invalid_lan_responses++; |
| spin_unlock_irqrestore(&intf->counter_lock, flags); |
| return 0; |
| } |
| |
| if (msg->rsp[2] != 0) { |
| /* An error getting the response, just ignore it. */ |
| return 0; |
| } |
| |
| lan_addr.addr_type = IPMI_LAN_ADDR_TYPE; |
| lan_addr.session_handle = msg->rsp[4]; |
| lan_addr.remote_SWID = msg->rsp[8]; |
| lan_addr.local_SWID = msg->rsp[5]; |
| lan_addr.channel = msg->rsp[3] & 0x0f; |
| lan_addr.privilege = msg->rsp[3] >> 4; |
| lan_addr.lun = msg->rsp[9] & 3; |
| |
| /* It's a response from a remote entity. Look up the sequence |
| number and handle the response. */ |
| if (intf_find_seq(intf, |
| msg->rsp[9] >> 2, |
| msg->rsp[3] & 0x0f, |
| msg->rsp[10], |
| (msg->rsp[6] >> 2) & (~1), |
| (struct ipmi_addr *) &(lan_addr), |
| &recv_msg)) |
| { |
| /* We were unable to find the sequence number, |
| so just nuke the message. */ |
| spin_lock_irqsave(&intf->counter_lock, flags); |
| intf->unhandled_lan_responses++; |
| spin_unlock_irqrestore(&intf->counter_lock, flags); |
| return 0; |
| } |
| |
| memcpy(recv_msg->msg_data, |
| &(msg->rsp[11]), |
| msg->rsp_size - 11); |
| /* The other fields matched, so no need to set them, except |
| for netfn, which needs to be the response that was |
| returned, not the request value. */ |
| recv_msg->msg.netfn = msg->rsp[6] >> 2; |
| recv_msg->msg.data = recv_msg->msg_data; |
| recv_msg->msg.data_len = msg->rsp_size - 12; |
| recv_msg->recv_type = IPMI_RESPONSE_RECV_TYPE; |
| spin_lock_irqsave(&intf->counter_lock, flags); |
| intf->handled_lan_responses++; |
| spin_unlock_irqrestore(&intf->counter_lock, flags); |
| deliver_response(recv_msg); |
| |
| return 0; |
| } |
| |
| static int handle_lan_get_msg_cmd(ipmi_smi_t intf, |
| struct ipmi_smi_msg *msg) |
| { |
| struct cmd_rcvr *rcvr; |
| int rv = 0; |
| unsigned char netfn; |
| unsigned char cmd; |
| unsigned char chan; |
| ipmi_user_t user = NULL; |
| struct ipmi_lan_addr *lan_addr; |
| struct ipmi_recv_msg *recv_msg; |
| unsigned long flags; |
| |
| if (msg->rsp_size < 12) { |
| /* Message not big enough, just ignore it. */ |
| spin_lock_irqsave(&intf->counter_lock, flags); |
| intf->invalid_commands++; |
| spin_unlock_irqrestore(&intf->counter_lock, flags); |
| return 0; |
| } |
| |
| if (msg->rsp[2] != 0) { |
| /* An error getting the response, just ignore it. */ |
| return 0; |
| } |
| |
| netfn = msg->rsp[6] >> 2; |
| cmd = msg->rsp[10]; |
| chan = msg->rsp[3] & 0xf; |
| |
| rcu_read_lock(); |
| rcvr = find_cmd_rcvr(intf, netfn, cmd, chan); |
| if (rcvr) { |
| user = rcvr->user; |
| kref_get(&user->refcount); |
| } else |
| user = NULL; |
| rcu_read_unlock(); |
| |
| if (user == NULL) { |
| /* We didn't find a user, just give up. */ |
| spin_lock_irqsave(&intf->counter_lock, flags); |
| intf->unhandled_commands++; |
| spin_unlock_irqrestore(&intf->counter_lock, flags); |
| |
| rv = 0; /* Don't do anything with these messages, just |
| allow them to be freed. */ |
| } else { |
| /* Deliver the message to the user. */ |
| spin_lock_irqsave(&intf->counter_lock, flags); |
| intf->handled_commands++; |
| spin_unlock_irqrestore(&intf->counter_lock, flags); |
| |
| recv_msg = ipmi_alloc_recv_msg(); |
| if (!recv_msg) { |
| /* We couldn't allocate memory for the |
| message, so requeue it for handling |
| later. */ |
| rv = 1; |
| kref_put(&user->refcount, free_user); |
| } else { |
| /* Extract the source address from the data. */ |
| lan_addr = (struct ipmi_lan_addr *) &recv_msg->addr; |
| lan_addr->addr_type = IPMI_LAN_ADDR_TYPE; |
| lan_addr->session_handle = msg->rsp[4]; |
| lan_addr->remote_SWID = msg->rsp[8]; |
| lan_addr->local_SWID = msg->rsp[5]; |
| lan_addr->lun = msg->rsp[9] & 3; |
| lan_addr->channel = msg->rsp[3] & 0xf; |
| lan_addr->privilege = msg->rsp[3] >> 4; |
| |
| /* Extract the rest of the message information |
| from the IPMB header.*/ |
| recv_msg->user = user; |
| recv_msg->recv_type = IPMI_CMD_RECV_TYPE; |
| recv_msg->msgid = msg->rsp[9] >> 2; |
| recv_msg->msg.netfn = msg->rsp[6] >> 2; |
| recv_msg->msg.cmd = msg->rsp[10]; |
| recv_msg->msg.data = recv_msg->msg_data; |
| |
| /* We chop off 12, not 11 bytes because the checksum |
| at the end also needs to be removed. */ |
| recv_msg->msg.data_len = msg->rsp_size - 12; |
| memcpy(recv_msg->msg_data, |
| &(msg->rsp[11]), |
| msg->rsp_size - 12); |
| deliver_response(recv_msg); |
| } |
| } |
| |
| return rv; |
| } |
| |
| static void copy_event_into_recv_msg(struct ipmi_recv_msg *recv_msg, |
| struct ipmi_smi_msg *msg) |
| { |
| struct ipmi_system_interface_addr *smi_addr; |
| |
| recv_msg->msgid = 0; |
| smi_addr = (struct ipmi_system_interface_addr *) &(recv_msg->addr); |
| smi_addr->addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; |
| smi_addr->channel = IPMI_BMC_CHANNEL; |
| smi_addr->lun = msg->rsp[0] & 3; |
| recv_msg->recv_type = IPMI_ASYNC_EVENT_RECV_TYPE; |
| recv_msg->msg.netfn = msg->rsp[0] >> 2; |
| recv_msg->msg.cmd = msg->rsp[1]; |
| memcpy(recv_msg->msg_data, &(msg->rsp[3]), msg->rsp_size - 3); |
| recv_msg->msg.data = recv_msg->msg_data; |
| recv_msg->msg.data_len = msg->rsp_size - 3; |
| } |
| |
| static int handle_read_event_rsp(ipmi_smi_t intf, |
| struct ipmi_smi_msg *msg) |
| { |
| struct ipmi_recv_msg *recv_msg, *recv_msg2; |
| struct list_head msgs; |
| ipmi_user_t user; |
| int rv = 0; |
| int deliver_count = 0; |
| unsigned long flags; |
| |
| if (msg->rsp_size < 19) { |
| /* Message is too small to be an IPMB event. */ |
| spin_lock_irqsave(&intf->counter_lock, flags); |
| intf->invalid_events++; |
| spin_unlock_irqrestore(&intf->counter_lock, flags); |
| return 0; |
| } |
| |
| if (msg->rsp[2] != 0) { |
| /* An error getting the event, just ignore it. */ |
| return 0; |
| } |
| |
| INIT_LIST_HEAD(&msgs); |
| |
| spin_lock_irqsave(&intf->events_lock, flags); |
| |
| spin_lock(&intf->counter_lock); |
| intf->events++; |
| spin_unlock(&intf->counter_lock); |
| |
| /* Allocate and fill in one message for every user that is getting |
| events. */ |
| rcu_read_lock(); |
| list_for_each_entry_rcu(user, &intf->users, link) { |
| if (!user->gets_events) |
| continue; |
| |
| recv_msg = ipmi_alloc_recv_msg(); |
| if (!recv_msg) { |
| rcu_read_unlock(); |
| list_for_each_entry_safe(recv_msg, recv_msg2, &msgs, |
| link) { |
| list_del(&recv_msg->link); |
| ipmi_free_recv_msg(recv_msg); |
| } |
| /* We couldn't allocate memory for the |
| message, so requeue it for handling |
| later. */ |
| rv = 1; |
| goto out; |
| } |
| |
| deliver_count++; |
| |
| copy_event_into_recv_msg(recv_msg, msg); |
| recv_msg->user = user; |
| kref_get(&user->refcount); |
| list_add_tail(&(recv_msg->link), &msgs); |
| } |
| rcu_read_unlock(); |
| |
| if (deliver_count) { |
| /* Now deliver all the messages. */ |
| list_for_each_entry_safe(recv_msg, recv_msg2, &msgs, link) { |
| list_del(&recv_msg->link); |
| deliver_response(recv_msg); |
| } |
| } else if (intf->waiting_events_count < MAX_EVENTS_IN_QUEUE) { |
| /* No one to receive the message, put it in queue if there's |
| not already too many things in the queue. */ |
| recv_msg = ipmi_alloc_recv_msg(); |
| if (!recv_msg) { |
| /* We couldn't allocate memory for the |
| message, so requeue it for handling |
| later. */ |
| rv = 1; |
| goto out; |
| } |
| |
| copy_event_into_recv_msg(recv_msg, msg); |
| list_add_tail(&(recv_msg->link), &(intf->waiting_events)); |
| intf->waiting_events_count++; |
| } else { |
| /* There's too many things in the queue, discard this |
| message. */ |
| printk(KERN_WARNING PFX "Event queue full, discarding an" |
| " incoming event\n"); |
| } |
| |
| out: |
| spin_unlock_irqrestore(&(intf->events_lock), flags); |
| |
| return rv; |
| } |
| |
| static int handle_bmc_rsp(ipmi_smi_t intf, |
| struct ipmi_smi_msg *msg) |
| { |
| struct ipmi_recv_msg *recv_msg; |
| unsigned long flags; |
| struct ipmi_user *user; |
| |
| recv_msg = (struct ipmi_recv_msg *) msg->user_data; |
| if (recv_msg == NULL) |
| { |
| printk(KERN_WARNING"IPMI message received with no owner. This\n" |
| "could be because of a malformed message, or\n" |
| "because of a hardware error. Contact your\n" |
| "hardware vender for assistance\n"); |
| return 0; |
| } |
| |
| user = recv_msg->user; |
| /* Make sure the user still exists. */ |
| if (user && !user->valid) { |
| /* The user for the message went away, so give up. */ |
| spin_lock_irqsave(&intf->counter_lock, flags); |
| intf->unhandled_local_responses++; |
| spin_unlock_irqrestore(&intf->counter_lock, flags); |
| ipmi_free_recv_msg(recv_msg); |
| } else { |
| struct ipmi_system_interface_addr *smi_addr; |
| |
| spin_lock_irqsave(&intf->counter_lock, flags); |
| intf->handled_local_responses++; |
| spin_unlock_irqrestore(&intf->counter_lock, flags); |
| recv_msg->recv_type = IPMI_RESPONSE_RECV_TYPE; |
| recv_msg->msgid = msg->msgid; |
| smi_addr = ((struct ipmi_system_interface_addr *) |
| &(recv_msg->addr)); |
| smi_addr->addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; |
| smi_addr->channel = IPMI_BMC_CHANNEL; |
| smi_addr->lun = msg->rsp[0] & 3; |
| recv_msg->msg.netfn = msg->rsp[0] >> 2; |
| recv_msg->msg.cmd = msg->rsp[1]; |
| memcpy(recv_msg->msg_data, |
| &(msg->rsp[2]), |
| msg->rsp_size - 2); |
| recv_msg->msg.data = recv_msg->msg_data; |
| recv_msg->msg.data_len = msg->rsp_size - 2; |
| deliver_response(recv_msg); |
| } |
| |
| return 0; |
| } |
| |
| /* Handle a new message. Return 1 if the message should be requeued, |
| 0 if the message should be freed, or -1 if the message should not |
| be freed or requeued. */ |
| static int handle_new_recv_msg(ipmi_smi_t intf, |
| struct ipmi_smi_msg *msg) |
| { |
| int requeue; |
| int chan; |
| |
| #ifdef DEBUG_MSGING |
| int m; |
| printk("Recv:"); |
| for (m = 0; m < msg->rsp_size; m++) |
| printk(" %2.2x", msg->rsp[m]); |
| printk("\n"); |
| #endif |
| if (msg->rsp_size < 2) { |
| /* Message is too small to be correct. */ |
| printk(KERN_WARNING PFX "BMC returned to small a message" |
| " for netfn %x cmd %x, got %d bytes\n", |
| (msg->data[0] >> 2) | 1, msg->data[1], msg->rsp_size); |
| |
| /* Generate an error response for the message. */ |
| msg->rsp[0] = msg->data[0] | (1 << 2); |
| msg->rsp[1] = msg->data[1]; |
| msg->rsp[2] = IPMI_ERR_UNSPECIFIED; |
| msg->rsp_size = 3; |
| } else if (((msg->rsp[0] >> 2) != ((msg->data[0] >> 2) | 1))/* Netfn */ |
| || (msg->rsp[1] != msg->data[1])) /* Command */ |
| { |
| /* The response is not even marginally correct. */ |
| printk(KERN_WARNING PFX "BMC returned incorrect response," |
| " expected netfn %x cmd %x, got netfn %x cmd %x\n", |
| (msg->data[0] >> 2) | 1, msg->data[1], |
| msg->rsp[0] >> 2, msg->rsp[1]); |
| |
| /* Generate an error response for the message. */ |
| msg->rsp[0] = msg->data[0] | (1 << 2); |
| msg->rsp[1] = msg->data[1]; |
| msg->rsp[2] = IPMI_ERR_UNSPECIFIED; |
| msg->rsp_size = 3; |
| } |
| |
| if ((msg->rsp[0] == ((IPMI_NETFN_APP_REQUEST|1) << 2)) |
| && (msg->rsp[1] == IPMI_SEND_MSG_CMD) |
| && (msg->user_data != NULL)) |
| { |
| /* It's a response to a response we sent. For this we |
| deliver a send message response to the user. */ |
| struct ipmi_recv_msg *recv_msg = msg->user_data; |
| |
| requeue = 0; |
| if (msg->rsp_size < 2) |
| /* Message is too small to be correct. */ |
| goto out; |
| |
| chan = msg->data[2] & 0x0f; |
| if (chan >= IPMI_MAX_CHANNELS) |
| /* Invalid channel number */ |
| goto out; |
| |
| if (!recv_msg) |
| goto out; |
| |
| /* Make sure the user still exists. */ |
| if (!recv_msg->user || !recv_msg->user->valid) |
| goto out; |
| |
| recv_msg->recv_type = IPMI_RESPONSE_RESPONSE_TYPE; |
| recv_msg->msg.data = recv_msg->msg_data; |
| recv_msg->msg.data_len = 1; |
| recv_msg->msg_data[0] = msg->rsp[2]; |
| deliver_response(recv_msg); |
| } else if ((msg->rsp[0] == ((IPMI_NETFN_APP_REQUEST|1) << 2)) |
| && (msg->rsp[1] == IPMI_GET_MSG_CMD)) |
| { |
| /* It's from the receive queue. */ |
| chan = msg->rsp[3] & 0xf; |
| if (chan >= IPMI_MAX_CHANNELS) { |
| /* Invalid channel number */ |
| requeue = 0; |
| goto out; |
| } |
| |
| switch (intf->channels[chan].medium) { |
| case IPMI_CHANNEL_MEDIUM_IPMB: |
| if (msg->rsp[4] & 0x04) { |
| /* It's a response, so find the |
| requesting message and send it up. */ |
| requeue = handle_ipmb_get_msg_rsp(intf, msg); |
| } else { |
| /* It's a command to the SMS from some other |
| entity. Handle that. */ |
| requeue = handle_ipmb_get_msg_cmd(intf, msg); |
| } |
| break; |
| |
| case IPMI_CHANNEL_MEDIUM_8023LAN: |
| case IPMI_CHANNEL_MEDIUM_ASYNC: |
| if (msg->rsp[6] & 0x04) { |
| /* It's a response, so find the |
| requesting message and send it up. */ |
| requeue = handle_lan_get_msg_rsp(intf, msg); |
| } else { |
| /* It's a command to the SMS from some other |
| entity. Handle that. */ |
| requeue = handle_lan_get_msg_cmd(intf, msg); |
| } |
| break; |
| |
| default: |
| /* We don't handle the channel type, so just |
| * free the message. */ |
| requeue = 0; |
| } |
| |
| } else if ((msg->rsp[0] == ((IPMI_NETFN_APP_REQUEST|1) << 2)) |
| && (msg->rsp[1] == IPMI_READ_EVENT_MSG_BUFFER_CMD)) |
| { |
| /* It's an asyncronous event. */ |
| requeue = handle_read_event_rsp(intf, msg); |
| } else { |
| /* It's a response from the local BMC. */ |
| requeue = handle_bmc_rsp(intf, msg); |
| } |
| |
| out: |
| return requeue; |
| } |
| |
| /* Handle a new message from the lower layer. */ |
| void ipmi_smi_msg_received(ipmi_smi_t intf, |
| struct ipmi_smi_msg *msg) |
| { |
| unsigned long flags; |
| int rv; |
| |
| |
| if ((msg->data_size >= 2) |
| && (msg->data[0] == (IPMI_NETFN_APP_REQUEST << 2)) |
| && (msg->data[1] == IPMI_SEND_MSG_CMD) |
| && (msg->user_data == NULL)) |
| { |
| /* This is the local response to a command send, start |
| the timer for these. The user_data will not be |
| NULL if this is a response send, and we will let |
| response sends just go through. */ |
| |
| /* Check for errors, if we get certain errors (ones |
| that mean basically we can try again later), we |
| ignore them and start the timer. Otherwise we |
| report the error immediately. */ |
| if ((msg->rsp_size >= 3) && (msg->rsp[2] != 0) |
| && (msg->rsp[2] != IPMI_NODE_BUSY_ERR) |
| && (msg->rsp[2] != IPMI_LOST_ARBITRATION_ERR) |
| && (msg->rsp[2] != IPMI_BUS_ERR) |
| && (msg->rsp[2] != IPMI_NAK_ON_WRITE_ERR)) |
| { |
| int chan = msg->rsp[3] & 0xf; |
| |
| /* Got an error sending the message, handle it. */ |
| spin_lock_irqsave(&intf->counter_lock, flags); |
| if (chan >= IPMI_MAX_CHANNELS) |
| ; /* This shouldn't happen */ |
| else if ((intf->channels[chan].medium |
| == IPMI_CHANNEL_MEDIUM_8023LAN) |
| || (intf->channels[chan].medium |
| == IPMI_CHANNEL_MEDIUM_ASYNC)) |
| intf->sent_lan_command_errs++; |
| else |
| intf->sent_ipmb_command_errs++; |
| spin_unlock_irqrestore(&intf->counter_lock, flags); |
| intf_err_seq(intf, msg->msgid, msg->rsp[2]); |
| } else { |
| /* The message was sent, start the timer. */ |
| intf_start_seq_timer(intf, msg->msgid); |
| } |
| |
| ipmi_free_smi_msg(msg); |
| goto out; |
| } |
| |
| /* To preserve message order, if the list is not empty, we |
| tack this message onto the end of the list. */ |
| spin_lock_irqsave(&intf->waiting_msgs_lock, flags); |
| if (!list_empty(&intf->waiting_msgs)) { |
| list_add_tail(&msg->link, &intf->waiting_msgs); |
| spin_unlock_irqrestore(&intf->waiting_msgs_lock, flags); |
| goto out; |
| } |
| spin_unlock_irqrestore(&intf->waiting_msgs_lock, flags); |
| |
| rv = handle_new_recv_msg(intf, msg); |
| if (rv > 0) { |
| /* Could not handle the message now, just add it to a |
| list to handle later. */ |
| spin_lock_irqsave(&intf->waiting_msgs_lock, flags); |
| list_add_tail(&msg->link, &intf->waiting_msgs); |
| spin_unlock_irqrestore(&intf->waiting_msgs_lock, flags); |
| } else if (rv == 0) { |
| ipmi_free_smi_msg(msg); |
| } |
| |
| out: |
| return; |
| } |
| |
| void ipmi_smi_watchdog_pretimeout(ipmi_smi_t intf) |
| { |
| ipmi_user_t user; |
| |
| rcu_read_lock(); |
| list_for_each_entry_rcu(user, &intf->users, link) { |
| if (!user->handler->ipmi_watchdog_pretimeout) |
| continue; |
| |
| user->handler->ipmi_watchdog_pretimeout(user->handler_data); |
| } |
| rcu_read_unlock(); |
| } |
| |
| |
| static struct ipmi_smi_msg * |
| smi_from_recv_msg(ipmi_smi_t intf, struct ipmi_recv_msg *recv_msg, |
| unsigned char seq, long seqid) |
| { |
| struct ipmi_smi_msg *smi_msg = ipmi_alloc_smi_msg(); |
| if (!smi_msg) |
| /* If we can't allocate the message, then just return, we |
| get 4 retries, so this should be ok. */ |
| return NULL; |
| |
| memcpy(smi_msg->data, recv_msg->msg.data, recv_msg->msg.data_len); |
| smi_msg->data_size = recv_msg->msg.data_len; |
| smi_msg->msgid = STORE_SEQ_IN_MSGID(seq, seqid); |
| |
| #ifdef DEBUG_MSGING |
| { |
| int m; |
| printk("Resend: "); |
| for (m = 0; m < smi_msg->data_size; m++) |
| printk(" %2.2x", smi_msg->data[m]); |
| printk("\n"); |
| } |
| #endif |
| return smi_msg; |
| } |
| |
| static void check_msg_timeout(ipmi_smi_t intf, struct seq_table *ent, |
| struct list_head *timeouts, long timeout_period, |
| int slot, unsigned long *flags) |
| { |
| struct ipmi_recv_msg *msg; |
| struct ipmi_smi_handlers *handlers; |
| |
| if (intf->intf_num == -1) |
| return; |
| |
| if (!ent->inuse) |
| return; |
| |
| ent->timeout -= timeout_period; |
| if (ent->timeout > 0) |
| return; |
| |
| if (ent->retries_left == 0) { |
| /* The message has used all its retries. */ |
| ent->inuse = 0; |
| msg = ent->recv_msg; |
| list_add_tail(&msg->link, timeouts); |
| spin_lock(&intf->counter_lock); |
| if (ent->broadcast) |
| intf->timed_out_ipmb_broadcasts++; |
| else if (ent->recv_msg->addr.addr_type == IPMI_LAN_ADDR_TYPE) |
| intf->timed_out_lan_commands++; |
| else |
| intf->timed_out_ipmb_commands++; |
| spin_unlock(&intf->counter_lock); |
| } else { |
| struct ipmi_smi_msg *smi_msg; |
| /* More retries, send again. */ |
| |
| /* Start with the max timer, set to normal |
| timer after the message is sent. */ |
| ent->timeout = MAX_MSG_TIMEOUT; |
| ent->retries_left--; |
| spin_lock(&intf->counter_lock); |
| if (ent->recv_msg->addr.addr_type == IPMI_LAN_ADDR_TYPE) |
| intf->retransmitted_lan_commands++; |
| else |
| intf->retransmitted_ipmb_commands++; |
| spin_unlock(&intf->counter_lock); |
| |
| smi_msg = smi_from_recv_msg(intf, ent->recv_msg, slot, |
| ent->seqid); |
| if (!smi_msg) |
| return; |
| |
| spin_unlock_irqrestore(&intf->seq_lock, *flags); |
| |
| /* Send the new message. We send with a zero |
| * priority. It timed out, I doubt time is |
| * that critical now, and high priority |
| * messages are really only for messages to the |
| * local MC, which don't get resent. */ |
| handlers = intf->handlers; |
| if (handlers) |
| intf->handlers->sender(intf->send_info, |
| smi_msg, 0); |
| else |
| ipmi_free_smi_msg(smi_msg); |
| |
| spin_lock_irqsave(&intf->seq_lock, *flags); |
| } |
| } |
| |
| static void ipmi_timeout_handler(long timeout_period) |
| { |
| ipmi_smi_t intf; |
| struct list_head timeouts; |
| struct ipmi_recv_msg *msg, *msg2; |
| struct ipmi_smi_msg *smi_msg, *smi_msg2; |
| unsigned long flags; |
| int i; |
| |
| INIT_LIST_HEAD(&timeouts); |
| |
| rcu_read_lock(); |
| list_for_each_entry_rcu(intf, &ipmi_interfaces, link) { |
| /* See if any waiting messages need to be processed. */ |
| spin_lock_irqsave(&intf->waiting_msgs_lock, flags); |
| list_for_each_entry_safe(smi_msg, smi_msg2, |
| &intf->waiting_msgs, link) { |
| if (!handle_new_recv_msg(intf, smi_msg)) { |
| list_del(&smi_msg->link); |
| ipmi_free_smi_msg(smi_msg); |
| } else { |
| /* To preserve message order, quit if we |
| can't handle a message. */ |
| break; |
| } |
| } |
| spin_unlock_irqrestore(&intf->waiting_msgs_lock, flags); |
| |
| /* Go through the seq table and find any messages that |
| have timed out, putting them in the timeouts |
| list. */ |
| spin_lock_irqsave(&intf->seq_lock, flags); |
| for (i = 0; i < IPMI_IPMB_NUM_SEQ; i++) |
| check_msg_timeout(intf, &(intf->seq_table[i]), |
| &timeouts, timeout_period, i, |
| &flags); |
| spin_unlock_irqrestore(&intf->seq_lock, flags); |
| |
| list_for_each_entry_safe(msg, msg2, &timeouts, link) |
| deliver_err_response(msg, IPMI_TIMEOUT_COMPLETION_CODE); |
| |
| /* |
| * Maintenance mode handling. Check the timeout |
| * optimistically before we claim the lock. It may |
| * mean a timeout gets missed occasionally, but that |
| * only means the timeout gets extended by one period |
| * in that case. No big deal, and it avoids the lock |
| * most of the time. |
| */ |
| if (intf->auto_maintenance_timeout > 0) { |
| spin_lock_irqsave(&intf->maintenance_mode_lock, flags); |
| if (intf->auto_maintenance_timeout > 0) { |
| intf->auto_maintenance_timeout |
| -= timeout_period; |
| if (!intf->maintenance_mode |
| && (intf->auto_maintenance_timeout <= 0)) |
| { |
| intf->maintenance_mode_enable = 0; |
| maintenance_mode_update(intf); |
| } |
| } |
| spin_unlock_irqrestore(&intf->maintenance_mode_lock, |
| flags); |
| } |
| } |
| rcu_read_unlock(); |
| } |
| |
| static void ipmi_request_event(void) |
| { |
| ipmi_smi_t intf; |
| struct ipmi_smi_handlers *handlers; |
| |
| rcu_read_lock(); |
| /* Called from the timer, no need to check if handlers is |
| * valid. */ |
| list_for_each_entry_rcu(intf, &ipmi_interfaces, link) { |
| /* No event requests when in maintenance mode. */ |
| if (intf->maintenance_mode_enable) |
| continue; |
| |
| handlers = intf->handlers; |
| if (handlers) |
| handlers->request_events(intf->send_info); |
| } |
| rcu_read_unlock(); |
| } |
| |
| static struct timer_list ipmi_timer; |
| |
| /* Call every ~100 ms. */ |
| #define IPMI_TIMEOUT_TIME 100 |
| |
| /* How many jiffies does it take to get to the timeout time. */ |
| #define IPMI_TIMEOUT_JIFFIES ((IPMI_TIMEOUT_TIME * HZ) / 1000) |
| |
| /* Request events from the queue every second (this is the number of |
| IPMI_TIMEOUT_TIMES between event requests). Hopefully, in the |
| future, IPMI will add a way to know immediately if an event is in |
| the queue and this silliness can go away. */ |
| #define IPMI_REQUEST_EV_TIME (1000 / (IPMI_TIMEOUT_TIME)) |
| |
| static atomic_t stop_operation; |
| static unsigned int ticks_to_req_ev = IPMI_REQUEST_EV_TIME; |
| |
| static void ipmi_timeout(unsigned long data) |
| { |
| if (atomic_read(&stop_operation)) |
| return; |
| |
| ticks_to_req_ev--; |
| if (ticks_to_req_ev == 0) { |
| ipmi_request_event(); |
| ticks_to_req_ev = IPMI_REQUEST_EV_TIME; |
| } |
| |
| ipmi_timeout_handler(IPMI_TIMEOUT_TIME); |
| |
| mod_timer(&ipmi_timer, jiffies + IPMI_TIMEOUT_JIFFIES); |
| } |
| |
| |
| static atomic_t smi_msg_inuse_count = ATOMIC_INIT(0); |
| static atomic_t recv_msg_inuse_count = ATOMIC_INIT(0); |
| |
| /* FIXME - convert these to slabs. */ |
| static void free_smi_msg(struct ipmi_smi_msg *msg) |
| { |
| atomic_dec(&smi_msg_inuse_count); |
| kfree(msg); |
| } |
| |
| struct ipmi_smi_msg *ipmi_alloc_smi_msg(void) |
| { |
| struct ipmi_smi_msg *rv; |
| rv = kmalloc(sizeof(struct ipmi_smi_msg), GFP_ATOMIC); |
| if (rv) { |
| rv->done = free_smi_msg; |
| rv->user_data = NULL; |
| atomic_inc(&smi_msg_inuse_count); |
| } |
| return rv; |
| } |
| |
| static void free_recv_msg(struct ipmi_recv_msg *msg) |
| { |
| atomic_dec(&recv_msg_inuse_count); |
| kfree(msg); |
| } |
| |
| struct ipmi_recv_msg *ipmi_alloc_recv_msg(void) |
| { |
| struct ipmi_recv_msg *rv; |
| |
| rv = kmalloc(sizeof(struct ipmi_recv_msg), GFP_ATOMIC); |
| if (rv) { |
| rv->user = NULL; |
| rv->done = free_recv_msg; |
| atomic_inc(&recv_msg_inuse_count); |
| } |
| return rv; |
| } |
| |
| void ipmi_free_recv_msg(struct ipmi_recv_msg *msg) |
| { |
| if (msg->user) |
| kref_put(&msg->user->refcount, free_user); |
| msg->done(msg); |
| } |
| |
| #ifdef CONFIG_IPMI_PANIC_EVENT |
| |
| static void dummy_smi_done_handler(struct ipmi_smi_msg *msg) |
| { |
| } |
| |
| static void dummy_recv_done_handler(struct ipmi_recv_msg *msg) |
| { |
| } |
| |
| #ifdef CONFIG_IPMI_PANIC_STRING |
| static void event_receiver_fetcher(ipmi_smi_t intf, struct ipmi_recv_msg *msg) |
| { |
| if ((msg->addr.addr_type == IPMI_SYSTEM_INTERFACE_ADDR_TYPE) |
| && (msg->msg.netfn == IPMI_NETFN_SENSOR_EVENT_RESPONSE) |
| && (msg->msg.cmd == IPMI_GET_EVENT_RECEIVER_CMD) |
| && (msg->msg.data[0] == IPMI_CC_NO_ERROR)) |
| { |
| /* A get event receiver command, save it. */ |
| intf->event_receiver = msg->msg.data[1]; |
| intf->event_receiver_lun = msg->msg.data[2] & 0x3; |
| } |
| } |
| |
| static void device_id_fetcher(ipmi_smi_t intf, struct ipmi_recv_msg *msg) |
| { |
| if ((msg->addr.addr_type == IPMI_SYSTEM_INTERFACE_ADDR_TYPE) |
| && (msg->msg.netfn == IPMI_NETFN_APP_RESPONSE) |
| && (msg->msg.cmd == IPMI_GET_DEVICE_ID_CMD) |
| && (msg->msg.data[0] == IPMI_CC_NO_ERROR)) |
| { |
| /* A get device id command, save if we are an event |
| receiver or generator. */ |
| intf->local_sel_device = (msg->msg.data[6] >> 2) & 1; |
| intf->local_event_generator = (msg->msg.data[6] >> 5) & 1; |
| } |
| } |
| #endif |
| |
| static void send_panic_events(char *str) |
| { |
| struct kernel_ipmi_msg msg; |
| ipmi_smi_t intf; |
| unsigned char data[16]; |
| struct ipmi_system_interface_addr *si; |
| struct ipmi_addr addr; |
| struct ipmi_smi_msg smi_msg; |
| struct ipmi_recv_msg recv_msg; |
| |
| si = (struct ipmi_system_interface_addr *) &addr; |
| si->addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; |
| si->channel = IPMI_BMC_CHANNEL; |
| si->lun = 0; |
| |
| /* Fill in an event telling that we have failed. */ |
| msg.netfn = 0x04; /* Sensor or Event. */ |
| msg.cmd = 2; /* Platform event command. */ |
| msg.data = data; |
| msg.data_len = 8; |
| data[0] = 0x41; /* Kernel generator ID, IPMI table 5-4 */ |
| data[1] = 0x03; /* This is for IPMI 1.0. */ |
| data[2] = 0x20; /* OS Critical Stop, IPMI table 36-3 */ |
| data[4] = 0x6f; /* Sensor specific, IPMI table 36-1 */ |
| data[5] = 0xa1; /* Runtime stop OEM bytes 2 & 3. */ |
| |
| /* Put a few breadcrumbs in. Hopefully later we can add more things |
| to make the panic events more useful. */ |
| if (str) { |
| data[3] = str[0]; |
| data[6] = str[1]; |
| data[7] = str[2]; |
| } |
| |
| smi_msg.done = dummy_smi_done_handler; |
| recv_msg.done = dummy_recv_done_handler; |
| |
| /* For every registered interface, send the event. */ |
| list_for_each_entry_rcu(intf, &ipmi_interfaces, link) { |
| if (!intf->handlers) |
| /* Interface is not ready. */ |
| continue; |
| |
| /* Send the event announcing the panic. */ |
| intf->handlers->set_run_to_completion(intf->send_info, 1); |
| i_ipmi_request(NULL, |
| intf, |
| &addr, |
| 0, |
| &msg, |
| intf, |
| &smi_msg, |
| &recv_msg, |
| 0, |
| intf->channels[0].address, |
| intf->channels[0].lun, |
| 0, 1); /* Don't retry, and don't wait. */ |
| } |
| |
| #ifdef CONFIG_IPMI_PANIC_STRING |
| /* On every interface, dump a bunch of OEM event holding the |
| string. */ |
| if (!str) |
| return; |
| |
| /* For every registered interface, send the event. */ |
| list_for_each_entry_rcu(intf, &ipmi_interfaces, link) { |
| char *p = str; |
| struct ipmi_ipmb_addr *ipmb; |
| int j; |
| |
| if (intf->intf_num == -1) |
| /* Interface was not ready yet. */ |
| continue; |
| |
| /* First job here is to figure out where to send the |
| OEM events. There's no way in IPMI to send OEM |
| events using an event send command, so we have to |
| find the SEL to put them in and stick them in |
| there. */ |
| |
| /* Get capabilities from the get device id. */ |
| intf->local_sel_device = 0; |
| intf->local_event_generator = 0; |
| intf->event_receiver = 0; |
| |
| /* Request the device info from the local MC. */ |
| msg.netfn = IPMI_NETFN_APP_REQUEST; |
| msg.cmd = IPMI_GET_DEVICE_ID_CMD; |
| msg.data = NULL; |
| msg.data_len = 0; |
| intf->null_user_handler = device_id_fetcher; |
| i_ipmi_request(NULL, |
| intf, |
| &addr, |
| 0, |
| &msg, |
| intf, |
| &smi_msg, |
| &recv_msg, |
| 0, |
| intf->channels[0].address, |
| intf->channels[0].lun, |
| 0, 1); /* Don't retry, and don't wait. */ |
| |
| if (intf->local_event_generator) { |
| /* Request the event receiver from the local MC. */ |
| msg.netfn = IPMI_NETFN_SENSOR_EVENT_REQUEST; |
| msg.cmd = IPMI_GET_EVENT_RECEIVER_CMD; |
| msg.data = NULL; |
| msg.data_len = 0; |
| intf->null_user_handler = event_receiver_fetcher; |
| i_ipmi_request(NULL, |
| intf, |
| &addr, |
| 0, |
| &msg, |
| intf, |
| &smi_msg, |
| &recv_msg, |
| 0, |
| intf->channels[0].address, |
| intf->channels[0].lun, |
| 0, 1); /* no retry, and no wait. */ |
| } |
| intf->null_user_handler = NULL; |
| |
| /* Validate the event receiver. The low bit must not |
| be 1 (it must be a valid IPMB address), it cannot |
| be zero, and it must not be my address. */ |
| if (((intf->event_receiver & 1) == 0) |
| && (intf->event_receiver != 0) |
| && (intf->event_receiver != intf->channels[0].address)) |
| { |
| /* The event receiver is valid, send an IPMB |
| message. */ |
| ipmb = (struct ipmi_ipmb_addr *) &addr; |
| ipmb->addr_type = IPMI_IPMB_ADDR_TYPE; |
| ipmb->channel = 0; /* FIXME - is this right? */ |
| ipmb->lun = intf->event_receiver_lun; |
| ipmb->slave_addr = intf->event_receiver; |
| } else if (intf->local_sel_device) { |
| /* The event receiver was not valid (or was |
| me), but I am an SEL device, just dump it |
| in my SEL. */ |
| si = (struct ipmi_system_interface_addr *) &addr; |
| si->addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; |
| si->channel = IPMI_BMC_CHANNEL; |
| si->lun = 0; |
| } else |
| continue; /* No where to send the event. */ |
| |
| |
| msg.netfn = IPMI_NETFN_STORAGE_REQUEST; /* Storage. */ |
| msg.cmd = IPMI_ADD_SEL_ENTRY_CMD; |
| msg.data = data; |
| msg.data_len = 16; |
| |
| j = 0; |
| while (*p) { |
| int size = strlen(p); |
| |
| if (size > 11) |
| size = 11; |
| data[0] = 0; |
| data[1] = 0; |
| data[2] = 0xf0; /* OEM event without timestamp. */ |
| data[3] = intf->channels[0].address; |
| data[4] = j++; /* sequence # */ |
| /* Always give 11 bytes, so strncpy will fill |
| it with zeroes for me. */ |
| strncpy(data+5, p, 11); |
| p += size; |
| |
| i_ipmi_request(NULL, |
| intf, |
| &addr, |
| 0, |
| &msg, |
| intf, |
| &smi_msg, |
| &recv_msg, |
| 0, |
| intf->channels[0].address, |
| intf->channels[0].lun, |
| 0, 1); /* no retry, and no wait. */ |
| } |
| } |
| #endif /* CONFIG_IPMI_PANIC_STRING */ |
| } |
| #endif /* CONFIG_IPMI_PANIC_EVENT */ |
| |
| static int has_panicked = 0; |
| |
| static int panic_event(struct notifier_block *this, |
| unsigned long event, |
| void *ptr) |
| { |
| ipmi_smi_t intf; |
| |
| if (has_panicked) |
| return NOTIFY_DONE; |
| has_panicked = 1; |
| |
| /* For every registered interface, set it to run to completion. */ |
| list_for_each_entry_rcu(intf, &ipmi_interfaces, link) { |
| if (!intf->handlers) |
| /* Interface is not ready. */ |
| continue; |
| |
| intf->handlers->set_run_to_completion(intf->send_info, 1); |
| } |
| |
| #ifdef CONFIG_IPMI_PANIC_EVENT |
| send_panic_events(ptr); |
| #endif |
| |
| return NOTIFY_DONE; |
| } |
| |
| static struct notifier_block panic_block = { |
| .notifier_call = panic_event, |
| .next = NULL, |
| .priority = 200 /* priority: INT_MAX >= x >= 0 */ |
| }; |
| |
| static int ipmi_init_msghandler(void) |
| { |
| int rv; |
| |
| if (initialized) |
| return 0; |
| |
| rv = driver_register(&ipmidriver); |
| if (rv) { |
| printk(KERN_ERR PFX "Could not register IPMI driver\n"); |
| return rv; |
| } |
| |
| printk(KERN_INFO "ipmi message handler version " |
| IPMI_DRIVER_VERSION "\n"); |
| |
| #ifdef CONFIG_PROC_FS |
| proc_ipmi_root = proc_mkdir("ipmi", NULL); |
| if (!proc_ipmi_root) { |
| printk(KERN_ERR PFX "Unable to create IPMI proc dir"); |
| return -ENOMEM; |
| } |
| |
| proc_ipmi_root->owner = THIS_MODULE; |
| #endif /* CONFIG_PROC_FS */ |
| |
| setup_timer(&ipmi_timer, ipmi_timeout, 0); |
| mod_timer(&ipmi_timer, jiffies + IPMI_TIMEOUT_JIFFIES); |
| |
| atomic_notifier_chain_register(&panic_notifier_list, &panic_block); |
| |
| initialized = 1; |
| |
| return 0; |
| } |
| |
| static __init int ipmi_init_msghandler_mod(void) |
| { |
| ipmi_init_msghandler(); |
| return 0; |
| } |
| |
| static __exit void cleanup_ipmi(void) |
| { |
| int count; |
| |
| if (!initialized) |
| return; |
| |
| atomic_notifier_chain_unregister(&panic_notifier_list, &panic_block); |
| |
| /* This can't be called if any interfaces exist, so no worry about |
| shutting down the interfaces. */ |
| |
| /* Tell the timer to stop, then wait for it to stop. This avoids |
| problems with race conditions removing the timer here. */ |
| atomic_inc(&stop_operation); |
| del_timer_sync(&ipmi_timer); |
| |
| #ifdef CONFIG_PROC_FS |
| remove_proc_entry(proc_ipmi_root->name, &proc_root); |
| #endif /* CONFIG_PROC_FS */ |
| |
| driver_unregister(&ipmidriver); |
| |
| initialized = 0; |
| |
| /* Check for buffer leaks. */ |
| count = atomic_read(&smi_msg_inuse_count); |
| if (count != 0) |
| printk(KERN_WARNING PFX "SMI message count %d at exit\n", |
| count); |
| count = atomic_read(&recv_msg_inuse_count); |
| if (count != 0) |
| printk(KERN_WARNING PFX "recv message count %d at exit\n", |
| count); |
| } |
| module_exit(cleanup_ipmi); |
| |
| module_init(ipmi_init_msghandler_mod); |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Corey Minyard <minyard@mvista.com>"); |
| MODULE_DESCRIPTION("Incoming and outgoing message routing for an IPMI interface."); |
| MODULE_VERSION(IPMI_DRIVER_VERSION); |
| |
| EXPORT_SYMBOL(ipmi_create_user); |
| EXPORT_SYMBOL(ipmi_destroy_user); |
| EXPORT_SYMBOL(ipmi_get_version); |
| EXPORT_SYMBOL(ipmi_request_settime); |
| EXPORT_SYMBOL(ipmi_request_supply_msgs); |
| EXPORT_SYMBOL(ipmi_register_smi); |
| EXPORT_SYMBOL(ipmi_unregister_smi); |
| EXPORT_SYMBOL(ipmi_register_for_cmd); |
| EXPORT_SYMBOL(ipmi_unregister_for_cmd); |
| EXPORT_SYMBOL(ipmi_smi_msg_received); |
| EXPORT_SYMBOL(ipmi_smi_watchdog_pretimeout); |
| EXPORT_SYMBOL(ipmi_alloc_smi_msg); |
| EXPORT_SYMBOL(ipmi_addr_length); |
| EXPORT_SYMBOL(ipmi_validate_addr); |
| EXPORT_SYMBOL(ipmi_set_gets_events); |
| EXPORT_SYMBOL(ipmi_smi_watcher_register); |
| EXPORT_SYMBOL(ipmi_smi_watcher_unregister); |
| EXPORT_SYMBOL(ipmi_set_my_address); |
| EXPORT_SYMBOL(ipmi_get_my_address); |
| EXPORT_SYMBOL(ipmi_set_my_LUN); |
| EXPORT_SYMBOL(ipmi_get_my_LUN); |
| EXPORT_SYMBOL(ipmi_smi_add_proc_entry); |
| EXPORT_SYMBOL(ipmi_user_set_run_to_completion); |
| EXPORT_SYMBOL(ipmi_free_recv_msg); |