igb: Fix code comments and whitespace
Aligns the multi-line code comments with the desired style for the
networking tree. Also cleaned up whitespace issues found during the
cleanup of code comments (i.e. remove unnecessary blank lines,
use tabs where possible, properly wrap lines and keep strings on a
single line)
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
diff --git a/drivers/net/ethernet/intel/igb/e1000_regs.h b/drivers/net/ethernet/intel/igb/e1000_regs.h
index 1534328..971b638 100644
--- a/drivers/net/ethernet/intel/igb/e1000_regs.h
+++ b/drivers/net/ethernet/intel/igb/e1000_regs.h
@@ -117,21 +117,21 @@
#define E1000_RQDPC(_n) (0x0C030 + ((_n) * 0x40))
/* DMA Coalescing registers */
-#define E1000_DMACR 0x02508 /* Control Register */
-#define E1000_DMCTXTH 0x03550 /* Transmit Threshold */
-#define E1000_DMCTLX 0x02514 /* Time to Lx Request */
-#define E1000_DMCRTRH 0x05DD0 /* Receive Packet Rate Threshold */
-#define E1000_DMCCNT 0x05DD4 /* Current Rx Count */
-#define E1000_FCRTC 0x02170 /* Flow Control Rx high watermark */
-#define E1000_PCIEMISC 0x05BB8 /* PCIE misc config register */
+#define E1000_DMACR 0x02508 /* Control Register */
+#define E1000_DMCTXTH 0x03550 /* Transmit Threshold */
+#define E1000_DMCTLX 0x02514 /* Time to Lx Request */
+#define E1000_DMCRTRH 0x05DD0 /* Receive Packet Rate Threshold */
+#define E1000_DMCCNT 0x05DD4 /* Current Rx Count */
+#define E1000_FCRTC 0x02170 /* Flow Control Rx high watermark */
+#define E1000_PCIEMISC 0x05BB8 /* PCIE misc config register */
/* TX Rate Limit Registers */
-#define E1000_RTTDQSEL 0x3604 /* Tx Desc Plane Queue Select - WO */
-#define E1000_RTTBCNRM 0x3690 /* Tx BCN Rate-scheduler MMW */
-#define E1000_RTTBCNRC 0x36B0 /* Tx BCN Rate-Scheduler Config - WO */
+#define E1000_RTTDQSEL 0x3604 /* Tx Desc Plane Queue Select - WO */
+#define E1000_RTTBCNRM 0x3690 /* Tx BCN Rate-scheduler MMW */
+#define E1000_RTTBCNRC 0x36B0 /* Tx BCN Rate-Scheduler Config - WO */
/* Split and Replication RX Control - RW */
-#define E1000_RXPBS 0x02404 /* Rx Packet Buffer Size - RW */
+#define E1000_RXPBS 0x02404 /* Rx Packet Buffer Size - RW */
/* Thermal sensor configuration and status registers */
#define E1000_THMJT 0x08100 /* Junction Temperature */
@@ -140,8 +140,7 @@
#define E1000_THHIGHTC 0x0810C /* High Threshold Control */
#define E1000_THSTAT 0x08110 /* Thermal Sensor Status */
-/*
- * Convenience macros
+/* Convenience macros
*
* Note: "_n" is the queue number of the register to be written to.
*
@@ -287,7 +286,7 @@
#define E1000_RFCTL 0x05008 /* Receive Filter Control*/
#define E1000_MTA 0x05200 /* Multicast Table Array - RW Array */
#define E1000_RA 0x05400 /* Receive Address - RW Array */
-#define E1000_RA2 0x054E0 /* 2nd half of receive address array - RW Array */
+#define E1000_RA2 0x054E0 /* 2nd half of Rx address array - RW Array */
#define E1000_PSRTYPE(_i) (0x05480 + ((_i) * 4))
#define E1000_RAL(_i) (((_i) <= 15) ? (0x05400 + ((_i) * 8)) : \
(0x054E0 + ((_i - 16) * 8)))
@@ -360,21 +359,21 @@
(readl(hw->hw_addr + reg + ((offset) << 2)))
/* DMA Coalescing registers */
-#define E1000_PCIEMISC 0x05BB8 /* PCIE misc config register */
+#define E1000_PCIEMISC 0x05BB8 /* PCIE misc config register */
/* Energy Efficient Ethernet "EEE" register */
-#define E1000_IPCNFG 0x0E38 /* Internal PHY Configuration */
-#define E1000_EEER 0x0E30 /* Energy Efficient Ethernet */
-#define E1000_EEE_SU 0X0E34 /* EEE Setup */
+#define E1000_IPCNFG 0x0E38 /* Internal PHY Configuration */
+#define E1000_EEER 0x0E30 /* Energy Efficient Ethernet */
+#define E1000_EEE_SU 0X0E34 /* EEE Setup */
/* Thermal Sensor Register */
-#define E1000_THSTAT 0x08110 /* Thermal Sensor Status */
+#define E1000_THSTAT 0x08110 /* Thermal Sensor Status */
/* OS2BMC Registers */
-#define E1000_B2OSPC 0x08FE0 /* BMC2OS packets sent by BMC */
-#define E1000_B2OGPRC 0x04158 /* BMC2OS packets received by host */
-#define E1000_O2BGPTC 0x08FE4 /* OS2BMC packets received by BMC */
-#define E1000_O2BSPC 0x0415C /* OS2BMC packets transmitted by host */
+#define E1000_B2OSPC 0x08FE0 /* BMC2OS packets sent by BMC */
+#define E1000_B2OGPRC 0x04158 /* BMC2OS packets received by host */
+#define E1000_O2BGPTC 0x08FE4 /* OS2BMC packets received by BMC */
+#define E1000_O2BSPC 0x0415C /* OS2BMC packets transmitted by host */
#define E1000_SRWR 0x12018 /* Shadow Ram Write Register - RW */
#define E1000_I210_FLMNGCTL 0x12038