clk: keystone: add Keystone PLL clock driver
Add the driver for the PLL IPs found on Keystone 2 devices. The PLL
IP typically has a multiplier, a divider and a post-divider. The PLL IPs like
ARMPLL, DDRPLL and PAPLL are controlled by the memory mapped register where
as the Main PLL is controlled by a PLL controller and memory map registers.
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
diff --git a/Documentation/devicetree/bindings/clock/keystone-pll.txt b/Documentation/devicetree/bindings/clock/keystone-pll.txt
new file mode 100644
index 0000000..12bd726
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/keystone-pll.txt
@@ -0,0 +1,84 @@
+Status: Unstable - ABI compatibility may be broken in the future
+
+Binding for keystone PLLs. The main PLL IP typically has a multiplier,
+a divider and a post divider. The additional PLL IPs like ARMPLL, DDRPLL
+and PAPLL are controlled by the memory mapped register where as the Main
+PLL is controlled by a PLL controller registers along with memory mapped
+registers.
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- #clock-cells : from common clock binding; shall be set to 0.
+- compatible : shall be "ti,keystone,main-pll-clock" or "ti,keystone,pll-clock"
+- clocks : parent clock phandle
+- reg - pll control0 and pll multipler registers
+- reg-names : control and multiplier. The multiplier is applicable only for
+ main pll clock
+- fixed-postdiv : fixed post divider value
+
+Example:
+ mainpllclk: mainpllclk@2310110 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,main-pll-clock";
+ clocks = <&refclkmain>;
+ reg = <0x02620350 4>, <0x02310110 4>;
+ reg-names = "control", "multiplier";
+ fixed-postdiv = <2>;
+ };
+
+ papllclk: papllclk@2620358 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,pll-clock";
+ clocks = <&refclkmain>;
+ clock-output-names = "pa-pll-clk";
+ reg = <0x02620358 4>;
+ reg-names = "control";
+ fixed-postdiv = <6>;
+ };
+
+Required properties:
+- #clock-cells : from common clock binding; shall be set to 0.
+- compatible : shall be "ti,keystone,pll-mux-clock"
+- clocks : link phandles of parent clocks
+- reg - pll mux register
+- bit-shift : number of bits to shift the bit-mask
+- bit-mask : arbitrary bitmask for programming the mux
+
+Optional properties:
+- clock-output-names : From common clock binding.
+
+Example:
+ mainmuxclk: mainmuxclk@2310108 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,pll-mux-clock";
+ clocks = <&mainpllclk>, <&refclkmain>;
+ reg = <0x02310108 4>;
+ bit-shift = <23>;
+ bit-mask = <1>;
+ clock-output-names = "mainmuxclk";
+ };
+
+Required properties:
+- #clock-cells : from common clock binding; shall be set to 0.
+- compatible : shall be "ti,keystone,pll-divider-clock"
+- clocks : parent clock phandle
+- reg - pll mux register
+- bit-shift : number of bits to shift the bit-mask
+- bit-mask : arbitrary bitmask for programming the divider
+
+Optional properties:
+- clock-output-names : From common clock binding.
+
+Example:
+ gemtraceclk: gemtraceclk@2310120 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,pll-divider-clock";
+ clocks = <&mainmuxclk>;
+ reg = <0x02310120 4>;
+ bit-shift = <0>;
+ bit-mask = <8>;
+ clock-output-names = "gemtraceclk";
+ };