| /*************************************************************************** |
| * Copyright (C) 2006 by Hans Edgington <hans@edgington.nl> * |
| * Copyright (C) 2007-2009 Hans de Goede <hdegoede@redhat.com> * |
| * Copyright (C) 2010 Giel van Schijndel <me@mortis.eu> * |
| * * |
| * This program is free software; you can redistribute it and/or modify * |
| * it under the terms of the GNU General Public License as published by * |
| * the Free Software Foundation; either version 2 of the License, or * |
| * (at your option) any later version. * |
| * * |
| * This program is distributed in the hope that it will be useful, * |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of * |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * |
| * GNU General Public License for more details. * |
| * * |
| * You should have received a copy of the GNU General Public License * |
| * along with this program; if not, write to the * |
| * Free Software Foundation, Inc., * |
| * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * |
| ***************************************************************************/ |
| |
| #include <linux/err.h> |
| #include <linux/fs.h> |
| #include <linux/init.h> |
| #include <linux/io.h> |
| #include <linux/ioport.h> |
| #include <linux/miscdevice.h> |
| #include <linux/module.h> |
| #include <linux/mutex.h> |
| #include <linux/notifier.h> |
| #include <linux/reboot.h> |
| #include <linux/uaccess.h> |
| #include <linux/watchdog.h> |
| |
| #define DRVNAME "f71808e_wdt" |
| |
| #define SIO_F71808FG_LD_WDT 0x07 /* Watchdog timer logical device */ |
| #define SIO_UNLOCK_KEY 0x87 /* Key to enable Super-I/O */ |
| #define SIO_LOCK_KEY 0xAA /* Key to diasble Super-I/O */ |
| |
| #define SIO_REG_LDSEL 0x07 /* Logical device select */ |
| #define SIO_REG_DEVID 0x20 /* Device ID (2 bytes) */ |
| #define SIO_REG_DEVREV 0x22 /* Device revision */ |
| #define SIO_REG_MANID 0x23 /* Fintek ID (2 bytes) */ |
| #define SIO_REG_ENABLE 0x30 /* Logical device enable */ |
| #define SIO_REG_ADDR 0x60 /* Logical device address (2 bytes) */ |
| |
| #define SIO_FINTEK_ID 0x1934 /* Manufacturers ID */ |
| #define SIO_F71808_ID 0x0901 /* Chipset ID */ |
| #define SIO_F71858_ID 0x0507 /* Chipset ID */ |
| #define SIO_F71862_ID 0x0601 /* Chipset ID */ |
| #define SIO_F71882_ID 0x0541 /* Chipset ID */ |
| #define SIO_F71889_ID 0x0723 /* Chipset ID */ |
| |
| #define F71882FG_REG_START 0x01 |
| |
| #define F71808FG_REG_WDO_CONF 0xf0 |
| #define F71808FG_REG_WDT_CONF 0xf5 |
| #define F71808FG_REG_WD_TIME 0xf6 |
| |
| #define F71808FG_FLAG_WDOUT_EN 7 |
| |
| #define F71808FG_FLAG_WDTMOUT_STS 5 |
| #define F71808FG_FLAG_WD_EN 5 |
| #define F71808FG_FLAG_WD_PULSE 4 |
| #define F71808FG_FLAG_WD_UNIT 3 |
| |
| /* Default values */ |
| #define WATCHDOG_TIMEOUT 60 /* 1 minute default timeout */ |
| #define WATCHDOG_MAX_TIMEOUT (60 * 255) |
| #define WATCHDOG_PULSE_WIDTH 125 /* 125 ms, default pulse width for |
| watchdog signal */ |
| |
| static unsigned short force_id; |
| module_param(force_id, ushort, 0); |
| MODULE_PARM_DESC(force_id, "Override the detected device ID"); |
| |
| static const int max_timeout = WATCHDOG_MAX_TIMEOUT; |
| static int timeout = 60; /* default timeout in seconds */ |
| module_param(timeout, int, 0); |
| MODULE_PARM_DESC(timeout, |
| "Watchdog timeout in seconds. 1<= timeout <=" |
| __MODULE_STRING(WATCHDOG_MAX_TIMEOUT) " (default=" |
| __MODULE_STRING(WATCHDOG_TIMEOUT) ")"); |
| |
| static unsigned int pulse_width = WATCHDOG_PULSE_WIDTH; |
| module_param(pulse_width, uint, 0); |
| MODULE_PARM_DESC(pulse_width, |
| "Watchdog signal pulse width. 0(=level), 1 ms, 25 ms, 125 ms or 5000 ms" |
| " (default=" __MODULE_STRING(WATCHDOG_PULSE_WIDTH) ")"); |
| |
| static int nowayout = WATCHDOG_NOWAYOUT; |
| module_param(nowayout, bool, 0444); |
| MODULE_PARM_DESC(nowayout, "Disable watchdog shutdown on close"); |
| |
| static unsigned int start_withtimeout; |
| module_param(start_withtimeout, uint, 0); |
| MODULE_PARM_DESC(start_withtimeout, "Start watchdog timer on module load with" |
| " given initial timeout. Zero (default) disables this feature."); |
| |
| enum chips { f71808fg, f71858fg, f71862fg, f71882fg, f71889fg }; |
| |
| static const char *f71808e_names[] = { |
| "f71808fg", |
| "f71858fg", |
| "f71862fg", |
| "f71882fg", |
| "f71889fg", |
| }; |
| |
| /* Super-I/O Function prototypes */ |
| static inline int superio_inb(int base, int reg); |
| static inline int superio_inw(int base, int reg); |
| static inline void superio_outb(int base, int reg, u8 val); |
| static inline void superio_set_bit(int base, int reg, int bit); |
| static inline void superio_clear_bit(int base, int reg, int bit); |
| static inline int superio_enter(int base); |
| static inline void superio_select(int base, int ld); |
| static inline void superio_exit(int base); |
| |
| struct watchdog_data { |
| unsigned short sioaddr; |
| enum chips type; |
| unsigned long opened; |
| struct mutex lock; |
| char expect_close; |
| struct watchdog_info ident; |
| |
| unsigned short timeout; |
| u8 timer_val; /* content for the wd_time register */ |
| char minutes_mode; |
| u8 pulse_val; /* pulse width flag */ |
| char pulse_mode; /* enable pulse output mode? */ |
| char caused_reboot; /* last reboot was by the watchdog */ |
| }; |
| |
| static struct watchdog_data watchdog = { |
| .lock = __MUTEX_INITIALIZER(watchdog.lock), |
| }; |
| |
| /* Super I/O functions */ |
| static inline int superio_inb(int base, int reg) |
| { |
| outb(reg, base); |
| return inb(base + 1); |
| } |
| |
| static int superio_inw(int base, int reg) |
| { |
| int val; |
| val = superio_inb(base, reg) << 8; |
| val |= superio_inb(base, reg + 1); |
| return val; |
| } |
| |
| static inline void superio_outb(int base, int reg, u8 val) |
| { |
| outb(reg, base); |
| outb(val, base + 1); |
| } |
| |
| static inline void superio_set_bit(int base, int reg, int bit) |
| { |
| unsigned long val = superio_inb(base, reg); |
| __set_bit(bit, &val); |
| superio_outb(base, reg, val); |
| } |
| |
| static inline void superio_clear_bit(int base, int reg, int bit) |
| { |
| unsigned long val = superio_inb(base, reg); |
| __clear_bit(bit, &val); |
| superio_outb(base, reg, val); |
| } |
| |
| static inline int superio_enter(int base) |
| { |
| /* Don't step on other drivers' I/O space by accident */ |
| if (!request_muxed_region(base, 2, DRVNAME)) { |
| printk(KERN_ERR DRVNAME ": I/O address 0x%04x already in use\n", |
| (int)base); |
| return -EBUSY; |
| } |
| |
| /* according to the datasheet the key must be send twice! */ |
| outb(SIO_UNLOCK_KEY, base); |
| outb(SIO_UNLOCK_KEY, base); |
| |
| return 0; |
| } |
| |
| static inline void superio_select(int base, int ld) |
| { |
| outb(SIO_REG_LDSEL, base); |
| outb(ld, base + 1); |
| } |
| |
| static inline void superio_exit(int base) |
| { |
| outb(SIO_LOCK_KEY, base); |
| release_region(base, 2); |
| } |
| |
| static int watchdog_set_timeout(int timeout) |
| { |
| if (timeout <= 0 |
| || timeout > max_timeout) { |
| printk(KERN_ERR DRVNAME ": watchdog timeout out of range\n"); |
| return -EINVAL; |
| } |
| |
| mutex_lock(&watchdog.lock); |
| |
| watchdog.timeout = timeout; |
| if (timeout > 0xff) { |
| watchdog.timer_val = DIV_ROUND_UP(timeout, 60); |
| watchdog.minutes_mode = true; |
| } else { |
| watchdog.timer_val = timeout; |
| watchdog.minutes_mode = false; |
| } |
| |
| mutex_unlock(&watchdog.lock); |
| |
| return 0; |
| } |
| |
| static int watchdog_set_pulse_width(unsigned int pw) |
| { |
| int err = 0; |
| |
| mutex_lock(&watchdog.lock); |
| |
| if (pw <= 1) { |
| watchdog.pulse_val = 0; |
| } else if (pw <= 25) { |
| watchdog.pulse_val = 1; |
| } else if (pw <= 125) { |
| watchdog.pulse_val = 2; |
| } else if (pw <= 5000) { |
| watchdog.pulse_val = 3; |
| } else { |
| printk(KERN_ERR DRVNAME ": pulse width out of range\n"); |
| err = -EINVAL; |
| goto exit_unlock; |
| } |
| |
| watchdog.pulse_mode = pw; |
| |
| exit_unlock: |
| mutex_unlock(&watchdog.lock); |
| return err; |
| } |
| |
| static int watchdog_keepalive(void) |
| { |
| int err = 0; |
| |
| mutex_lock(&watchdog.lock); |
| err = superio_enter(watchdog.sioaddr); |
| if (err) |
| goto exit_unlock; |
| superio_select(watchdog.sioaddr, SIO_F71808FG_LD_WDT); |
| |
| if (watchdog.minutes_mode) |
| /* select minutes for timer units */ |
| superio_set_bit(watchdog.sioaddr, F71808FG_REG_WDT_CONF, |
| F71808FG_FLAG_WD_UNIT); |
| else |
| /* select seconds for timer units */ |
| superio_clear_bit(watchdog.sioaddr, F71808FG_REG_WDT_CONF, |
| F71808FG_FLAG_WD_UNIT); |
| |
| /* Set timer value */ |
| superio_outb(watchdog.sioaddr, F71808FG_REG_WD_TIME, |
| watchdog.timer_val); |
| |
| superio_exit(watchdog.sioaddr); |
| |
| exit_unlock: |
| mutex_unlock(&watchdog.lock); |
| return err; |
| } |
| |
| static int watchdog_start(void) |
| { |
| /* Make sure we don't die as soon as the watchdog is enabled below */ |
| int err = watchdog_keepalive(); |
| if (err) |
| return err; |
| |
| mutex_lock(&watchdog.lock); |
| err = superio_enter(watchdog.sioaddr); |
| if (err) |
| goto exit_unlock; |
| superio_select(watchdog.sioaddr, SIO_F71808FG_LD_WDT); |
| |
| /* Watchdog pin configuration */ |
| switch (watchdog.type) { |
| case f71808fg: |
| /* Set pin 21 to GPIO23/WDTRST#, then to WDTRST# */ |
| superio_clear_bit(watchdog.sioaddr, 0x2a, 3); |
| superio_clear_bit(watchdog.sioaddr, 0x2b, 3); |
| break; |
| |
| case f71882fg: |
| /* Set pin 56 to WDTRST# */ |
| superio_set_bit(watchdog.sioaddr, 0x29, 1); |
| break; |
| |
| case f71889fg: |
| /* set pin 40 to WDTRST# */ |
| superio_outb(watchdog.sioaddr, 0x2b, |
| superio_inb(watchdog.sioaddr, 0x2b) & 0xcf); |
| break; |
| |
| default: |
| /* |
| * 'default' label to shut up the compiler and catch |
| * programmer errors |
| */ |
| err = -ENODEV; |
| goto exit_superio; |
| } |
| |
| superio_select(watchdog.sioaddr, SIO_F71808FG_LD_WDT); |
| superio_set_bit(watchdog.sioaddr, SIO_REG_ENABLE, 0); |
| superio_set_bit(watchdog.sioaddr, F71808FG_REG_WDO_CONF, |
| F71808FG_FLAG_WDOUT_EN); |
| |
| superio_set_bit(watchdog.sioaddr, F71808FG_REG_WDT_CONF, |
| F71808FG_FLAG_WD_EN); |
| |
| if (watchdog.pulse_mode) { |
| /* Select "pulse" output mode with given duration */ |
| u8 wdt_conf = superio_inb(watchdog.sioaddr, |
| F71808FG_REG_WDT_CONF); |
| |
| /* Set WD_PSWIDTH bits (1:0) */ |
| wdt_conf = (wdt_conf & 0xfc) | (watchdog.pulse_val & 0x03); |
| /* Set WD_PULSE to "pulse" mode */ |
| wdt_conf |= BIT(F71808FG_FLAG_WD_PULSE); |
| |
| superio_outb(watchdog.sioaddr, F71808FG_REG_WDT_CONF, |
| wdt_conf); |
| } else { |
| /* Select "level" output mode */ |
| superio_clear_bit(watchdog.sioaddr, F71808FG_REG_WDT_CONF, |
| F71808FG_FLAG_WD_PULSE); |
| } |
| |
| exit_superio: |
| superio_exit(watchdog.sioaddr); |
| exit_unlock: |
| mutex_unlock(&watchdog.lock); |
| |
| return err; |
| } |
| |
| static int watchdog_stop(void) |
| { |
| int err = 0; |
| |
| mutex_lock(&watchdog.lock); |
| err = superio_enter(watchdog.sioaddr); |
| if (err) |
| goto exit_unlock; |
| superio_select(watchdog.sioaddr, SIO_F71808FG_LD_WDT); |
| |
| superio_clear_bit(watchdog.sioaddr, F71808FG_REG_WDT_CONF, |
| F71808FG_FLAG_WD_EN); |
| |
| superio_exit(watchdog.sioaddr); |
| |
| exit_unlock: |
| mutex_unlock(&watchdog.lock); |
| |
| return err; |
| } |
| |
| static int watchdog_get_status(void) |
| { |
| int status = 0; |
| |
| mutex_lock(&watchdog.lock); |
| status = (watchdog.caused_reboot) ? WDIOF_CARDRESET : 0; |
| mutex_unlock(&watchdog.lock); |
| |
| return status; |
| } |
| |
| static bool watchdog_is_running(void) |
| { |
| /* |
| * if we fail to determine the watchdog's status assume it to be |
| * running to be on the safe side |
| */ |
| bool is_running = true; |
| |
| mutex_lock(&watchdog.lock); |
| if (superio_enter(watchdog.sioaddr)) |
| goto exit_unlock; |
| superio_select(watchdog.sioaddr, SIO_F71808FG_LD_WDT); |
| |
| is_running = (superio_inb(watchdog.sioaddr, SIO_REG_ENABLE) & BIT(0)) |
| && (superio_inb(watchdog.sioaddr, F71808FG_REG_WDT_CONF) |
| & F71808FG_FLAG_WD_EN); |
| |
| superio_exit(watchdog.sioaddr); |
| |
| exit_unlock: |
| mutex_unlock(&watchdog.lock); |
| return is_running; |
| } |
| |
| /* /dev/watchdog api */ |
| |
| static int watchdog_open(struct inode *inode, struct file *file) |
| { |
| int err; |
| |
| /* If the watchdog is alive we don't need to start it again */ |
| if (test_and_set_bit(0, &watchdog.opened)) |
| return -EBUSY; |
| |
| err = watchdog_start(); |
| if (err) { |
| clear_bit(0, &watchdog.opened); |
| return err; |
| } |
| |
| if (nowayout) |
| __module_get(THIS_MODULE); |
| |
| watchdog.expect_close = 0; |
| return nonseekable_open(inode, file); |
| } |
| |
| static int watchdog_release(struct inode *inode, struct file *file) |
| { |
| clear_bit(0, &watchdog.opened); |
| |
| if (!watchdog.expect_close) { |
| watchdog_keepalive(); |
| printk(KERN_CRIT DRVNAME |
| ": Unexpected close, not stopping watchdog!\n"); |
| } else if (!nowayout) { |
| watchdog_stop(); |
| } |
| return 0; |
| } |
| |
| /* |
| * watchdog_write: |
| * @file: file handle to the watchdog |
| * @buf: buffer to write |
| * @count: count of bytes |
| * @ppos: pointer to the position to write. No seeks allowed |
| * |
| * A write to a watchdog device is defined as a keepalive signal. Any |
| * write of data will do, as we we don't define content meaning. |
| */ |
| |
| static ssize_t watchdog_write(struct file *file, const char __user *buf, |
| size_t count, loff_t *ppos) |
| { |
| if (count) { |
| if (!nowayout) { |
| size_t i; |
| |
| /* In case it was set long ago */ |
| bool expect_close = false; |
| |
| for (i = 0; i != count; i++) { |
| char c; |
| if (get_user(c, buf + i)) |
| return -EFAULT; |
| expect_close = (c == 'V'); |
| } |
| |
| /* Properly order writes across fork()ed processes */ |
| mutex_lock(&watchdog.lock); |
| watchdog.expect_close = expect_close; |
| mutex_unlock(&watchdog.lock); |
| } |
| |
| /* someone wrote to us, we should restart timer */ |
| watchdog_keepalive(); |
| } |
| return count; |
| } |
| |
| /* |
| * watchdog_ioctl: |
| * @inode: inode of the device |
| * @file: file handle to the device |
| * @cmd: watchdog command |
| * @arg: argument pointer |
| * |
| * The watchdog API defines a common set of functions for all watchdogs |
| * according to their available features. |
| */ |
| static long watchdog_ioctl(struct file *file, unsigned int cmd, |
| unsigned long arg) |
| { |
| int status; |
| int new_options; |
| int new_timeout; |
| union { |
| struct watchdog_info __user *ident; |
| int __user *i; |
| } uarg; |
| |
| uarg.i = (int __user *)arg; |
| |
| switch (cmd) { |
| case WDIOC_GETSUPPORT: |
| return copy_to_user(uarg.ident, &watchdog.ident, |
| sizeof(watchdog.ident)) ? -EFAULT : 0; |
| |
| case WDIOC_GETSTATUS: |
| status = watchdog_get_status(); |
| if (status < 0) |
| return status; |
| return put_user(status, uarg.i); |
| |
| case WDIOC_GETBOOTSTATUS: |
| return put_user(0, uarg.i); |
| |
| case WDIOC_SETOPTIONS: |
| if (get_user(new_options, uarg.i)) |
| return -EFAULT; |
| |
| if (new_options & WDIOS_DISABLECARD) |
| watchdog_stop(); |
| |
| if (new_options & WDIOS_ENABLECARD) |
| return watchdog_start(); |
| |
| |
| case WDIOC_KEEPALIVE: |
| watchdog_keepalive(); |
| return 0; |
| |
| case WDIOC_SETTIMEOUT: |
| if (get_user(new_timeout, uarg.i)) |
| return -EFAULT; |
| |
| if (watchdog_set_timeout(new_timeout)) |
| return -EINVAL; |
| |
| watchdog_keepalive(); |
| /* Fall */ |
| |
| case WDIOC_GETTIMEOUT: |
| return put_user(watchdog.timeout, uarg.i); |
| |
| default: |
| return -ENOTTY; |
| |
| } |
| } |
| |
| static int watchdog_notify_sys(struct notifier_block *this, unsigned long code, |
| void *unused) |
| { |
| if (code == SYS_DOWN || code == SYS_HALT) |
| watchdog_stop(); |
| return NOTIFY_DONE; |
| } |
| |
| static const struct file_operations watchdog_fops = { |
| .owner = THIS_MODULE, |
| .llseek = no_llseek, |
| .open = watchdog_open, |
| .release = watchdog_release, |
| .write = watchdog_write, |
| .unlocked_ioctl = watchdog_ioctl, |
| }; |
| |
| static struct miscdevice watchdog_miscdev = { |
| .minor = WATCHDOG_MINOR, |
| .name = "watchdog", |
| .fops = &watchdog_fops, |
| }; |
| |
| static struct notifier_block watchdog_notifier = { |
| .notifier_call = watchdog_notify_sys, |
| }; |
| |
| static int __init watchdog_init(int sioaddr) |
| { |
| int wdt_conf, err = 0; |
| |
| /* No need to lock watchdog.lock here because no entry points |
| * into the module have been registered yet. |
| */ |
| watchdog.sioaddr = sioaddr; |
| watchdog.ident.options = WDIOC_SETTIMEOUT |
| | WDIOF_MAGICCLOSE |
| | WDIOF_KEEPALIVEPING; |
| |
| snprintf(watchdog.ident.identity, |
| sizeof(watchdog.ident.identity), "%s watchdog", |
| f71808e_names[watchdog.type]); |
| |
| err = superio_enter(sioaddr); |
| if (err) |
| return err; |
| superio_select(watchdog.sioaddr, SIO_F71808FG_LD_WDT); |
| |
| wdt_conf = superio_inb(sioaddr, F71808FG_REG_WDT_CONF); |
| watchdog.caused_reboot = wdt_conf & F71808FG_FLAG_WDTMOUT_STS; |
| |
| superio_exit(sioaddr); |
| |
| err = watchdog_set_timeout(timeout); |
| if (err) |
| return err; |
| err = watchdog_set_pulse_width(pulse_width); |
| if (err) |
| return err; |
| |
| err = register_reboot_notifier(&watchdog_notifier); |
| if (err) |
| return err; |
| |
| err = misc_register(&watchdog_miscdev); |
| if (err) { |
| printk(KERN_ERR DRVNAME |
| ": cannot register miscdev on minor=%d\n", |
| watchdog_miscdev.minor); |
| goto exit_reboot; |
| } |
| |
| if (start_withtimeout) { |
| if (start_withtimeout <= 0 |
| || start_withtimeout > max_timeout) { |
| printk(KERN_ERR DRVNAME |
| ": starting timeout out of range\n"); |
| err = -EINVAL; |
| goto exit_miscdev; |
| } |
| |
| err = watchdog_start(); |
| if (err) { |
| printk(KERN_ERR DRVNAME |
| ": cannot start watchdog timer\n"); |
| goto exit_miscdev; |
| } |
| |
| mutex_lock(&watchdog.lock); |
| err = superio_enter(sioaddr); |
| if (err) |
| goto exit_unlock; |
| superio_select(watchdog.sioaddr, SIO_F71808FG_LD_WDT); |
| |
| if (start_withtimeout > 0xff) { |
| /* select minutes for timer units */ |
| superio_set_bit(sioaddr, F71808FG_REG_WDT_CONF, |
| F71808FG_FLAG_WD_UNIT); |
| superio_outb(sioaddr, F71808FG_REG_WD_TIME, |
| DIV_ROUND_UP(start_withtimeout, 60)); |
| } else { |
| /* select seconds for timer units */ |
| superio_clear_bit(sioaddr, F71808FG_REG_WDT_CONF, |
| F71808FG_FLAG_WD_UNIT); |
| superio_outb(sioaddr, F71808FG_REG_WD_TIME, |
| start_withtimeout); |
| } |
| |
| superio_exit(sioaddr); |
| mutex_unlock(&watchdog.lock); |
| |
| if (nowayout) |
| __module_get(THIS_MODULE); |
| |
| printk(KERN_INFO DRVNAME |
| ": watchdog started with initial timeout of %u sec\n", |
| start_withtimeout); |
| } |
| |
| return 0; |
| |
| exit_unlock: |
| mutex_unlock(&watchdog.lock); |
| exit_miscdev: |
| misc_deregister(&watchdog_miscdev); |
| exit_reboot: |
| unregister_reboot_notifier(&watchdog_notifier); |
| |
| return err; |
| } |
| |
| static int __init f71808e_find(int sioaddr) |
| { |
| u16 devid; |
| int err = superio_enter(sioaddr); |
| if (err) |
| return err; |
| |
| devid = superio_inw(sioaddr, SIO_REG_MANID); |
| if (devid != SIO_FINTEK_ID) { |
| pr_debug(DRVNAME ": Not a Fintek device\n"); |
| err = -ENODEV; |
| goto exit; |
| } |
| |
| devid = force_id ? force_id : superio_inw(sioaddr, SIO_REG_DEVID); |
| switch (devid) { |
| case SIO_F71808_ID: |
| watchdog.type = f71808fg; |
| break; |
| case SIO_F71882_ID: |
| watchdog.type = f71882fg; |
| break; |
| case SIO_F71889_ID: |
| watchdog.type = f71889fg; |
| break; |
| case SIO_F71862_ID: |
| /* These have a watchdog, though it isn't implemented (yet). */ |
| err = -ENOSYS; |
| goto exit; |
| case SIO_F71858_ID: |
| /* Confirmed (by datasheet) not to have a watchdog. */ |
| err = -ENODEV; |
| goto exit; |
| default: |
| printk(KERN_INFO DRVNAME ": Unrecognized Fintek device: %04x\n", |
| (unsigned int)devid); |
| err = -ENODEV; |
| goto exit; |
| } |
| |
| printk(KERN_INFO DRVNAME ": Found %s watchdog chip, revision %d\n", |
| f71808e_names[watchdog.type], |
| (int)superio_inb(sioaddr, SIO_REG_DEVREV)); |
| exit: |
| superio_exit(sioaddr); |
| return err; |
| } |
| |
| static int __init f71808e_init(void) |
| { |
| static const unsigned short addrs[] = { 0x2e, 0x4e }; |
| int err = -ENODEV; |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(addrs); i++) { |
| err = f71808e_find(addrs[i]); |
| if (err == 0) |
| break; |
| } |
| if (i == ARRAY_SIZE(addrs)) |
| return err; |
| |
| return watchdog_init(addrs[i]); |
| } |
| |
| static void __exit f71808e_exit(void) |
| { |
| if (watchdog_is_running()) { |
| printk(KERN_WARNING DRVNAME |
| ": Watchdog timer still running, stopping it\n"); |
| watchdog_stop(); |
| } |
| misc_deregister(&watchdog_miscdev); |
| unregister_reboot_notifier(&watchdog_notifier); |
| } |
| |
| MODULE_DESCRIPTION("F71808E Watchdog Driver"); |
| MODULE_AUTHOR("Giel van Schijndel <me@mortis.eu>"); |
| MODULE_LICENSE("GPL"); |
| |
| module_init(f71808e_init); |
| module_exit(f71808e_exit); |