regulator: ab8500: Add set_mode/get_mode support
Signed-off-by: Ludovic Barré <ludovic.barre@stericsson.com>
Signed-off-by: Emeric Vigier <emeric.vigier@stericsson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Bengt JONSSON <bengt.g.jonsson@stericsson.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c
index 4d9d556..283d9a5 100644
--- a/drivers/regulator/ab8500.c
+++ b/drivers/regulator/ab8500.c
@@ -30,10 +30,13 @@
* @dev: device pointer
* @desc: regulator description
* @regulator_dev: regulator device
+ * @is_enabled: status of regulator (on/off)
* @update_bank: bank to control on/off
* @update_reg: register to control on/off
- * @update_mask: mask to enable/disable regulator
- * @update_val_enable: bits to enable the regulator in normal (high power) mode
+ * @update_mask: mask to enable/disable and set mode of regulator
+ * @update_val: bits holding the regulator current mode
+ * @update_val_idle: bits to enable the regulator in idle (low power) mode
+ * @update_val_normal: bits to enable the regulator in normal (high power) mode
* @voltage_bank: bank to control regulator voltage
* @voltage_reg: register to control regulator voltage
* @voltage_mask: mask to control regulator voltage
@@ -44,10 +47,13 @@
struct device *dev;
struct regulator_desc desc;
struct regulator_dev *regulator;
+ bool is_enabled;
u8 update_bank;
u8 update_reg;
u8 update_mask;
- u8 update_val_enable;
+ u8 update_val;
+ u8 update_val_idle;
+ u8 update_val_normal;
u8 voltage_bank;
u8 voltage_reg;
u8 voltage_mask;
@@ -108,15 +114,17 @@
ret = abx500_mask_and_set_register_interruptible(info->dev,
info->update_bank, info->update_reg,
- info->update_mask, info->update_val_enable);
+ info->update_mask, info->update_val);
if (ret < 0)
dev_err(rdev_get_dev(rdev),
"couldn't set enable bits for regulator\n");
+ info->is_enabled = true;
+
dev_vdbg(rdev_get_dev(rdev),
"%s-enable (bank, reg, mask, value): 0x%x, 0x%x, 0x%x, 0x%x\n",
info->desc.name, info->update_bank, info->update_reg,
- info->update_mask, info->update_val_enable);
+ info->update_mask, info->update_val);
return ret;
}
@@ -138,6 +146,8 @@
dev_err(rdev_get_dev(rdev),
"couldn't set disable bits for regulator\n");
+ info->is_enabled = false;
+
dev_vdbg(rdev_get_dev(rdev),
"%s-disable (bank, reg, mask, value): 0x%x, 0x%x, 0x%x, 0x%x\n",
info->desc.name, info->update_bank, info->update_reg,
@@ -146,6 +156,61 @@
return ret;
}
+static int ab8500_regulator_set_mode(struct regulator_dev *rdev,
+ unsigned int mode)
+{
+ int ret = 0;
+
+ struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
+
+ if (info == NULL) {
+ dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
+ return -EINVAL;
+ }
+
+ switch (mode) {
+ case REGULATOR_MODE_NORMAL:
+ info->update_val = info->update_val_normal;
+ break;
+ case REGULATOR_MODE_IDLE:
+ info->update_val = info->update_val_idle;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (info->is_enabled) {
+ ret = abx500_mask_and_set_register_interruptible(info->dev,
+ info->update_bank, info->update_reg,
+ info->update_mask, info->update_val);
+ if (ret < 0)
+ dev_err(rdev_get_dev(rdev),
+ "couldn't set regulator mode\n");
+ }
+
+ return ret;
+}
+
+static unsigned int ab8500_regulator_get_mode(struct regulator_dev *rdev)
+{
+ struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
+ int ret;
+
+ if (info == NULL) {
+ dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
+ return -EINVAL;
+ }
+
+ if (info->update_val == info->update_val_normal)
+ ret = REGULATOR_MODE_NORMAL;
+ else if (info->update_val == info->update_val_idle)
+ ret = REGULATOR_MODE_IDLE;
+ else
+ ret = -EINVAL;
+
+ return ret;
+}
+
static int ab8500_regulator_is_enabled(struct regulator_dev *rdev)
{
int ret;
@@ -172,9 +237,11 @@
info->update_mask, regval);
if (regval & info->update_mask)
- return true;
+ info->is_enabled = true;
else
- return false;
+ info->is_enabled = false;
+
+ return info->is_enabled;
}
static int ab8500_regulator_get_voltage_sel(struct regulator_dev *rdev)
@@ -249,6 +316,8 @@
static struct regulator_ops ab8500_regulator_ops = {
.enable = ab8500_regulator_enable,
.disable = ab8500_regulator_disable,
+ .set_mode = ab8500_regulator_set_mode,
+ .get_mode = ab8500_regulator_get_mode,
.is_enabled = ab8500_regulator_is_enabled,
.get_voltage_sel = ab8500_regulator_get_voltage_sel,
.set_voltage_sel = ab8500_regulator_set_voltage_sel,
@@ -284,7 +353,9 @@
.update_bank = 0x04,
.update_reg = 0x09,
.update_mask = 0x03,
- .update_val_enable = 0x01,
+ .update_val = 0x01,
+ .update_val_idle = 0x03,
+ .update_val_normal = 0x01,
.voltage_bank = 0x04,
.voltage_reg = 0x1f,
.voltage_mask = 0x0f,
@@ -302,7 +373,9 @@
.update_bank = 0x04,
.update_reg = 0x09,
.update_mask = 0x0c,
- .update_val_enable = 0x04,
+ .update_val = 0x04,
+ .update_val_idle = 0x0c,
+ .update_val_normal = 0x04,
.voltage_bank = 0x04,
.voltage_reg = 0x20,
.voltage_mask = 0x0f,
@@ -320,7 +393,9 @@
.update_bank = 0x04,
.update_reg = 0x0a,
.update_mask = 0x03,
- .update_val_enable = 0x01,
+ .update_val = 0x01,
+ .update_val_idle = 0x03,
+ .update_val_normal = 0x01,
.voltage_bank = 0x04,
.voltage_reg = 0x21,
.voltage_mask = 0x07,
@@ -338,7 +413,9 @@
.update_bank = 0x03,
.update_reg = 0x80,
.update_mask = 0x44,
- .update_val_enable = 0x04,
+ .update_val = 0x04,
+ .update_val_idle = 0x44,
+ .update_val_normal = 0x04,
.voltage_bank = 0x03,
.voltage_reg = 0x80,
.voltage_mask = 0x38,
@@ -365,7 +442,7 @@
.update_bank = 0x03,
.update_reg = 0x80,
.update_mask = 0x82,
- .update_val_enable = 0x02,
+ .update_val = 0x02,
},
[AB8500_LDO_USB] = {
.desc = {
@@ -380,7 +457,6 @@
.update_bank = 0x03,
.update_reg = 0x82,
.update_mask = 0x03,
- .update_val_enable = 0x01,
},
[AB8500_LDO_AUDIO] = {
.desc = {
@@ -395,7 +471,7 @@
.update_bank = 0x03,
.update_reg = 0x83,
.update_mask = 0x02,
- .update_val_enable = 0x02,
+ .update_val = 0x02,
},
[AB8500_LDO_ANAMIC1] = {
.desc = {
@@ -410,7 +486,7 @@
.update_bank = 0x03,
.update_reg = 0x83,
.update_mask = 0x08,
- .update_val_enable = 0x08,
+ .update_val = 0x08,
},
[AB8500_LDO_ANAMIC2] = {
.desc = {
@@ -425,7 +501,7 @@
.update_bank = 0x03,
.update_reg = 0x83,
.update_mask = 0x10,
- .update_val_enable = 0x10,
+ .update_val = 0x10,
},
[AB8500_LDO_DMIC] = {
.desc = {
@@ -440,7 +516,7 @@
.update_bank = 0x03,
.update_reg = 0x83,
.update_mask = 0x04,
- .update_val_enable = 0x04,
+ .update_val = 0x04,
},
[AB8500_LDO_ANA] = {
.desc = {
@@ -455,7 +531,7 @@
.update_bank = 0x04,
.update_reg = 0x06,
.update_mask = 0x0c,
- .update_val_enable = 0x04,
+ .update_val = 0x04,
},