[PATCH] USB: shuttle_usbat: Hardcode detection of HP CDRW devices
Use USB vendor and product IDs to determine whether the attached
device is a CDROM or a Flash device. Daniel Drake says that the
*same* vendor and product IDs for non-HP vendor ID could be either
flash or cdrom, so try to probe for them.
Signed-off-by: Peter Chubb <peterc@gelato.unsw.edu.au>
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/usb/storage/shuttle_usbat.c b/drivers/usb/storage/shuttle_usbat.c
index 92095b8..8fcec01 100644
--- a/drivers/usb/storage/shuttle_usbat.c
+++ b/drivers/usb/storage/shuttle_usbat.c
@@ -893,22 +893,28 @@
* Set the transport function based on the device type
*/
static int usbat_set_transport(struct us_data *us,
- struct usbat_info *info)
+ struct usbat_info *info,
+ int devicetype)
{
- int rc;
- if (!info->devicetype) {
- rc = usbat_identify_device(us, info);
- if (rc != USB_STOR_TRANSPORT_GOOD) {
- US_DEBUGP("usbat_set_transport: Could not identify device\n");
- return 1;
- }
- }
+ if (!info->devicetype)
+ info->devicetype = devicetype;
- if (usbat_get_device_type(us) == USBAT_DEV_HP8200)
+ if (!info->devicetype)
+ usbat_identify_device(us, info);
+
+ switch (info->devicetype) {
+ default:
+ return USB_STOR_TRANSPORT_ERROR;
+
+ case USBAT_DEV_HP8200:
us->transport = usbat_hp8200e_transport;
- else if (usbat_get_device_type(us) == USBAT_DEV_FLASH)
+ break;
+
+ case USBAT_DEV_FLASH:
us->transport = usbat_flash_transport;
+ break;
+ }
return 0;
}
@@ -1316,7 +1322,7 @@
/*
* Initialize the USBAT processor and the storage device
*/
-int init_usbat(struct us_data *us)
+static int init_usbat(struct us_data *us, int devicetype)
{
int rc;
struct usbat_info *info;
@@ -1398,7 +1404,7 @@
US_DEBUGP("INIT 9\n");
/* At this point, we need to detect which device we are using */
- if (usbat_set_transport(us, info))
+ if (usbat_set_transport(us, info, devicetype))
return USB_STOR_TRANSPORT_ERROR;
US_DEBUGP("INIT 10\n");
@@ -1701,6 +1707,22 @@
return USB_STOR_TRANSPORT_FAILED;
}
+int init_usbat_cd(struct us_data *us)
+{
+ return init_usbat(us, USBAT_DEV_HP8200);
+}
+
+
+int init_usbat_flash(struct us_data *us)
+{
+ return init_usbat(us, USBAT_DEV_FLASH);
+}
+
+int init_usbat_probe(struct us_data *us)
+{
+ return init_usbat(us, 0);
+}
+
/*
* Default transport function. Attempts to detect which transport function
* should be called, makes it the new default, and calls it.
@@ -1714,9 +1736,8 @@
{
struct usbat_info *info = (struct usbat_info*) (us->extra);
- if (usbat_set_transport(us, info))
+ if (usbat_set_transport(us, info, 0))
return USB_STOR_TRANSPORT_ERROR;
return us->transport(srb, us);
}
-
diff --git a/drivers/usb/storage/shuttle_usbat.h b/drivers/usb/storage/shuttle_usbat.h
index 25e7d8b..3ddf143 100644
--- a/drivers/usb/storage/shuttle_usbat.h
+++ b/drivers/usb/storage/shuttle_usbat.h
@@ -106,7 +106,9 @@
#define USBAT_FEAT_ET2 0x01
extern int usbat_transport(struct scsi_cmnd *srb, struct us_data *us);
-extern int init_usbat(struct us_data *us);
+extern int init_usbat_cd(struct us_data *us);
+extern int init_usbat_flash(struct us_data *us);
+extern int init_usbat_probe(struct us_data *us);
struct usbat_info {
int devicetype;
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index aec5ea8..f24fa12 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -78,12 +78,12 @@
UNUSUAL_DEV( 0x03f0, 0x0207, 0x0001, 0x0001,
"HP",
"CD-Writer+ 8200e",
- US_SC_8070, US_PR_USBAT, init_usbat, 0),
+ US_SC_8070, US_PR_USBAT, init_usbat_cd, 0),
UNUSUAL_DEV( 0x03f0, 0x0307, 0x0001, 0x0001,
"HP",
"CD-Writer+ CD-4e",
- US_SC_8070, US_PR_USBAT, init_usbat, 0),
+ US_SC_8070, US_PR_USBAT, init_usbat_cd, 0),
#endif
/* Reported by Sebastian Kapfer <sebastian_kapfer@gmx.net>
@@ -393,7 +393,7 @@
UNUSUAL_DEV( 0x04e6, 0x1010, 0x0000, 0x9999,
"Shuttle/SCM",
"USBAT-02",
- US_SC_SCSI, US_PR_USBAT, init_usbat,
+ US_SC_SCSI, US_PR_USBAT, init_usbat_probe,
US_FL_SINGLE_LUN),
#endif
@@ -797,7 +797,7 @@
UNUSUAL_DEV( 0x0781, 0x0005, 0x0005, 0x0005,
"Sandisk",
"ImageMate SDDR-05b",
- US_SC_SCSI, US_PR_USBAT, init_usbat,
+ US_SC_SCSI, US_PR_USBAT, init_usbat_flash,
US_FL_SINGLE_LUN ),
#endif