bnx2: Remove config access to non-standard registers
In KVM passthrough mode, the driver may not have config access to
non-standard registers. The BNX2_PCICFG_MISC_CONFIG config register
access to setup mailbox swapping can be done using MMIO.
Update version to 2.0.20.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 78f91ef..03209a3 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -56,8 +56,8 @@
#include "bnx2_fw.h"
#define DRV_MODULE_NAME "bnx2"
-#define DRV_MODULE_VERSION "2.0.18"
-#define DRV_MODULE_RELDATE "Oct 7, 2010"
+#define DRV_MODULE_VERSION "2.0.20"
+#define DRV_MODULE_RELDATE "Nov 24, 2010"
#define FW_MIPS_FILE_06 "bnx2/bnx2-mips-06-6.0.15.fw"
#define FW_RV2P_FILE_06 "bnx2/bnx2-rv2p-06-6.0.15.fw"
#define FW_MIPS_FILE_09 "bnx2/bnx2-mips-09-6.0.17.fw"
@@ -4683,7 +4683,7 @@
val = BNX2_PCICFG_MISC_CONFIG_REG_WINDOW_ENA |
BNX2_PCICFG_MISC_CONFIG_TARGET_MB_WORD_SWAP;
- pci_write_config_dword(bp->pdev, BNX2_PCICFG_MISC_CONFIG, val);
+ REG_WR(bp, BNX2_PCICFG_MISC_CONFIG, val);
} else {
val = BNX2_PCICFG_MISC_CONFIG_CORE_RST_REQ |
@@ -7924,15 +7924,15 @@
goto err_out_release;
}
+ bnx2_set_power_state(bp, PCI_D0);
+
/* Configure byte swap and enable write to the reg_window registers.
* Rely on CPU to do target byte swapping on big endian systems
* The chip's target access swapping will not swap all accesses
*/
- pci_write_config_dword(bp->pdev, BNX2_PCICFG_MISC_CONFIG,
- BNX2_PCICFG_MISC_CONFIG_REG_WINDOW_ENA |
- BNX2_PCICFG_MISC_CONFIG_TARGET_MB_WORD_SWAP);
-
- bnx2_set_power_state(bp, PCI_D0);
+ REG_WR(bp, BNX2_PCICFG_MISC_CONFIG,
+ BNX2_PCICFG_MISC_CONFIG_REG_WINDOW_ENA |
+ BNX2_PCICFG_MISC_CONFIG_TARGET_MB_WORD_SWAP);
bp->chip_id = REG_RD(bp, BNX2_MISC_ID);