drivers/platform/x86/samsung-laptop.c - kernel/msm-5.4 - Gitiles

 /*
  * Samsung Laptop driver
  *
  * Copyright (C) 2009,2011 Greg Kroah-Hartman (gregkh@suse.de)
  * Copyright (C) 2009,2011 Novell Inc.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License version 2 as published by
  * the Free Software Foundation.
  *
  */
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt

 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/delay.h>
 #include <linux/pci.h>
 #include <linux/backlight.h>
 #include <linux/fb.h>
 #include <linux/dmi.h>
 #include <linux/platform_device.h>
 #include <linux/rfkill.h>

 /*
  * This driver is needed because a number of Samsung laptops do not hook
  * their control settings through ACPI.  So we have to poke around in the
  * BIOS to do things like brightness values, and "special" key controls.
  */

 /*
  * We have 0 - 8 as valid brightness levels.  The specs say that level 0 should
  * be reserved by the BIOS (which really doesn't make much sense), we tell
  * userspace that the value is 0 - 7 and then just tell the hardware 1 - 8
  */
 #define MAX_BRIGHT	0x07


 #define SABI_IFACE_MAIN			0x00
 #define SABI_IFACE_SUB			0x02
 #define SABI_IFACE_COMPLETE		0x04
 #define SABI_IFACE_DATA			0x05

 /* Structure to get data back to the calling function */
 struct sabi_retval {
 	u8 retval[20];
 };

 struct sabi_header_offsets {
 	u8 port;
 	u8 re_mem;
 	u8 iface_func;
 	u8 en_mem;
 	u8 data_offset;
 	u8 data_segment;
 };

 struct sabi_commands {
 	/*
 	 * Brightness is 0 - 8, as described above.
 	 * Value 0 is for the BIOS to use
 	 */
 	u8 get_brightness;
 	u8 set_brightness;

 	/*
 	 * first byte:
 	 * 0x00 - wireless is off
 	 * 0x01 - wireless is on
 	 * second byte:
 	 * 0x02 - 3G is off
 	 * 0x03 - 3G is on
 	 * TODO, verify 3G is correct, that doesn't seem right...
 	 */
 	u8 get_wireless_button;
 	u8 set_wireless_button;

 	/* 0 is off, 1 is on */
 	u8 get_backlight;
 	u8 set_backlight;

 	/*
 	 * 0x80 or 0x00 - no action
 	 * 0x81 - recovery key pressed
 	 */
 	u8 get_recovery_mode;
 	u8 set_recovery_mode;

 	/*
 	 * on seclinux: 0 is low, 1 is high,
 	 * on swsmi: 0 is normal, 1 is silent, 2 is turbo
 	 */
 	u8 get_performance_level;
 	u8 set_performance_level;

 	/*
 	 * Tell the BIOS that Linux is running on this machine.
 	 * 81 is on, 80 is off
 	 */
 	u8 set_linux;
 };

 struct sabi_performance_level {
 	const char *name;
 	u8 value;
 };

 struct sabi_config {
 	const char *test_string;
 	u16 main_function;
 	const struct sabi_header_offsets header_offsets;
 	const struct sabi_commands commands;
 	const struct sabi_performance_level performance_levels[4];
 	u8 min_brightness;
 	u8 max_brightness;
 };

 static const struct sabi_config sabi_configs[] = {
 	{
 		.test_string = "SECLINUX",

 		.main_function = 0x4c49,

 		.header_offsets = {
 			.port = 0x00,
 			.re_mem = 0x02,
 			.iface_func = 0x03,
 			.en_mem = 0x04,
 			.data_offset = 0x05,
 			.data_segment = 0x07,
 		},

 		.commands = {
 			.get_brightness = 0x00,
 			.set_brightness = 0x01,

 			.get_wireless_button = 0x02,
 			.set_wireless_button = 0x03,

 			.get_backlight = 0x04,
 			.set_backlight = 0x05,

 			.get_recovery_mode = 0x06,
 			.set_recovery_mode = 0x07,

 			.get_performance_level = 0x08,
 			.set_performance_level = 0x09,

 			.set_linux = 0x0a,
 		},

 		.performance_levels = {
 			{
 				.name = "silent",
 				.value = 0,
 			},
 			{
 				.name = "normal",
 				.value = 1,
 			},
 			{ },
 		},
 		.min_brightness = 1,
 		.max_brightness = 8,
 	},
 	{
 		.test_string = "SwSmi@",

 		.main_function = 0x5843,

 		.header_offsets = {
 			.port = 0x00,
 			.re_mem = 0x04,
 			.iface_func = 0x02,
 			.en_mem = 0x03,
 			.data_offset = 0x05,
 			.data_segment = 0x07,
 		},

 		.commands = {
 			.get_brightness = 0x10,
 			.set_brightness = 0x11,

 			.get_wireless_button = 0x12,
 			.set_wireless_button = 0x13,

 			.get_backlight = 0x2d,
 			.set_backlight = 0x2e,

 			.get_recovery_mode = 0xff,
 			.set_recovery_mode = 0xff,

 			.get_performance_level = 0x31,
 			.set_performance_level = 0x32,

 			.set_linux = 0xff,
 		},

 		.performance_levels = {
 			{
 				.name = "normal",
 				.value = 0,
 			},
 			{
 				.name = "silent",
 				.value = 1,
 			},
 			{
 				.name = "overclock",
 				.value = 2,
 			},
 			{ },
 		},
 		.min_brightness = 0,
 		.max_brightness = 8,
 	},
 	{ },
 };

 static const struct sabi_config *sabi_config;

 static void __iomem *sabi;
 static void __iomem *sabi_iface;
 static void __iomem *f0000_segment;
 static struct backlight_device *backlight_device;
 static struct mutex sabi_mutex;
 static struct platform_device *sdev;
 static struct rfkill *rfk;

 static int force;
 module_param(force, bool, 0);
 MODULE_PARM_DESC(force,
 		"Disable the DMI check and forces the driver to be loaded");

 static int debug;
 module_param(debug, bool, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(debug, "Debug enabled or not");

 static int sabi_get_command(u8 command, struct sabi_retval *sretval)
 {
 	int retval = 0;
 	u16 port = readw(sabi + sabi_config->header_offsets.port);
 	u8 complete, iface_data;

 	mutex_lock(&sabi_mutex);

 	/* enable memory to be able to write to it */
 	outb(readb(sabi + sabi_config->header_offsets.en_mem), port);

 	/* write out the command */
 	writew(sabi_config->main_function, sabi_iface + SABI_IFACE_MAIN);
 	writew(command, sabi_iface + SABI_IFACE_SUB);
 	writeb(0, sabi_iface + SABI_IFACE_COMPLETE);
 	outb(readb(sabi + sabi_config->header_offsets.iface_func), port);

 	/* write protect memory to make it safe */
 	outb(readb(sabi + sabi_config->header_offsets.re_mem), port);

 	/* see if the command actually succeeded */
 	complete = readb(sabi_iface + SABI_IFACE_COMPLETE);
 	iface_data = readb(sabi_iface + SABI_IFACE_DATA);
 	if (complete != 0xaa || iface_data == 0xff) {
 		pr_warn("SABI get command 0x%02x failed with completion flag 0x%02x and data 0x%02x\n",
 		        command, complete, iface_data);
 		retval = -EINVAL;
 		goto exit;
 	}
 	/*
 	 * Save off the data into a structure so the caller use it.
 	 * Right now we only want the first 4 bytes,
 	 * There are commands that need more, but not for the ones we
 	 * currently care about.
 	 */
 	sretval->retval[0] = readb(sabi_iface + SABI_IFACE_DATA);
 	sretval->retval[1] = readb(sabi_iface + SABI_IFACE_DATA + 1);
 	sretval->retval[2] = readb(sabi_iface + SABI_IFACE_DATA + 2);
 	sretval->retval[3] = readb(sabi_iface + SABI_IFACE_DATA + 3);

 exit:
 	mutex_unlock(&sabi_mutex);
 	return retval;

 }

 static int sabi_set_command(u8 command, u8 data)
 {
 	int retval = 0;
 	u16 port = readw(sabi + sabi_config->header_offsets.port);
 	u8 complete, iface_data;

 	mutex_lock(&sabi_mutex);

 	/* enable memory to be able to write to it */
 	outb(readb(sabi + sabi_config->header_offsets.en_mem), port);

 	/* write out the command */
 	writew(sabi_config->main_function, sabi_iface + SABI_IFACE_MAIN);
 	writew(command, sabi_iface + SABI_IFACE_SUB);
 	writeb(0, sabi_iface + SABI_IFACE_COMPLETE);
 	writeb(data, sabi_iface + SABI_IFACE_DATA);
 	outb(readb(sabi + sabi_config->header_offsets.iface_func), port);

 	/* write protect memory to make it safe */
 	outb(readb(sabi + sabi_config->header_offsets.re_mem), port);

 	/* see if the command actually succeeded */
 	complete = readb(sabi_iface + SABI_IFACE_COMPLETE);
 	iface_data = readb(sabi_iface + SABI_IFACE_DATA);
 	if (complete != 0xaa || iface_data == 0xff) {
 		pr_warn("SABI set command 0x%02x failed with completion flag 0x%02x and data 0x%02x\n",
 		       command, complete, iface_data);
 		retval = -EINVAL;
 	}

 	mutex_unlock(&sabi_mutex);
 	return retval;
 }

 static void test_backlight(void)
 {
 	struct sabi_retval sretval;

 	sabi_get_command(sabi_config->commands.get_backlight, &sretval);
 	printk(KERN_DEBUG "backlight = 0x%02x\n", sretval.retval[0]);

 	sabi_set_command(sabi_config->commands.set_backlight, 0);
 	printk(KERN_DEBUG "backlight should be off\n");

 	sabi_get_command(sabi_config->commands.get_backlight, &sretval);
 	printk(KERN_DEBUG "backlight = 0x%02x\n", sretval.retval[0]);

 	msleep(1000);

 	sabi_set_command(sabi_config->commands.set_backlight, 1);
 	printk(KERN_DEBUG "backlight should be on\n");

 	sabi_get_command(sabi_config->commands.get_backlight, &sretval);
 	printk(KERN_DEBUG "backlight = 0x%02x\n", sretval.retval[0]);
 }

 static void test_wireless(void)
 {
 	struct sabi_retval sretval;

 	sabi_get_command(sabi_config->commands.get_wireless_button, &sretval);
 	printk(KERN_DEBUG "wireless led = 0x%02x\n", sretval.retval[0]);

 	sabi_set_command(sabi_config->commands.set_wireless_button, 0);
 	printk(KERN_DEBUG "wireless led should be off\n");

 	sabi_get_command(sabi_config->commands.get_wireless_button, &sretval);
 	printk(KERN_DEBUG "wireless led = 0x%02x\n", sretval.retval[0]);

 	msleep(1000);

 	sabi_set_command(sabi_config->commands.set_wireless_button, 1);
 	printk(KERN_DEBUG "wireless led should be on\n");

 	sabi_get_command(sabi_config->commands.get_wireless_button, &sretval);
 	printk(KERN_DEBUG "wireless led = 0x%02x\n", sretval.retval[0]);
 }

 static u8 read_brightness(void)
 {
 	struct sabi_retval sretval;
 	int user_brightness = 0;
 	int retval;

 	retval = sabi_get_command(sabi_config->commands.get_brightness,
 				  &sretval);
 	if (!retval) {
 		user_brightness = sretval.retval[0];
 		if (user_brightness > sabi_config->min_brightness)
 			user_brightness -= sabi_config->min_brightness;
 		else
 			user_brightness = 0;
 	}
 	return user_brightness;
 }

 static void set_brightness(u8 user_brightness)
 {
 	u8 user_level = user_brightness + sabi_config->min_brightness;

 	sabi_set_command(sabi_config->commands.set_brightness, user_level);
 }

 static int get_brightness(struct backlight_device *bd)
 {
 	return (int)read_brightness();
 }

 static int update_status(struct backlight_device *bd)
 {
 	set_brightness(bd->props.brightness);

 	if (bd->props.power == FB_BLANK_UNBLANK)
 		sabi_set_command(sabi_config->commands.set_backlight, 1);
 	else
 		sabi_set_command(sabi_config->commands.set_backlight, 0);
 	return 0;
 }

 static const struct backlight_ops backlight_ops = {
 	.get_brightness	= get_brightness,
 	.update_status	= update_status,
 };

 static int rfkill_set(void *data, bool blocked)
 {
 	/* Do something with blocked...*/
 	/*
 	 * blocked == false is on
 	 * blocked == true is off
 	 */
 	if (blocked)
 		sabi_set_command(sabi_config->commands.set_wireless_button, 0);
 	else
 		sabi_set_command(sabi_config->commands.set_wireless_button, 1);

 	return 0;
 }

 static struct rfkill_ops rfkill_ops = {
 	.set_block = rfkill_set,
 };

 static int init_wireless(struct platform_device *sdev)
 {
 	int retval;

 	rfk = rfkill_alloc("samsung-wifi", &sdev->dev, RFKILL_TYPE_WLAN,
 			   &rfkill_ops, NULL);
 	if (!rfk)
 		return -ENOMEM;

 	retval = rfkill_register(rfk);
 	if (retval) {
 		rfkill_destroy(rfk);
 		return -ENODEV;
 	}

 	return 0;
 }

 static void destroy_wireless(void)
 {
 	rfkill_unregister(rfk);
 	rfkill_destroy(rfk);
 }

 static ssize_t get_performance_level(struct device *dev,
 				     struct device_attribute *attr, char *buf)
 {
 	struct sabi_retval sretval;
 	int retval;
 	int i;

 	/* Read the state */
 	retval = sabi_get_command(sabi_config->commands.get_performance_level,
 				  &sretval);
 	if (retval)
 		return retval;

 	/* The logic is backwards, yeah, lots of fun... */
 	for (i = 0; sabi_config->performance_levels[i].name; ++i) {
 		if (sretval.retval[0] == sabi_config->performance_levels[i].value)
 			return sprintf(buf, "%s\n", sabi_config->performance_levels[i].name);
 	}
 	return sprintf(buf, "%s\n", "unknown");
 }

 static ssize_t set_performance_level(struct device *dev,
 				struct device_attribute *attr, const char *buf,
 				size_t count)
 {
 	if (count >= 1) {
 		int i;
 		for (i = 0; sabi_config->performance_levels[i].name; ++i) {
 			const struct sabi_performance_level *level =
 				&sabi_config->performance_levels[i];
 			if (!strncasecmp(level->name, buf, strlen(level->name))) {
 				sabi_set_command(sabi_config->commands.set_performance_level,
 						 level->value);
 				break;
 			}
 		}
 		if (!sabi_config->performance_levels[i].name)
 			return -EINVAL;
 	}
 	return count;
 }
 static DEVICE_ATTR(performance_level, S_IWUSR | S_IRUGO,
 		   get_performance_level, set_performance_level);


 static int __init dmi_check_cb(const struct dmi_system_id *id)
 {
 	pr_info("found laptop model '%s'\n",
 		id->ident);
 	return 1;
 }

 static struct dmi_system_id __initdata samsung_dmi_table[] = {
 	{
 		.ident = "N128",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR,
 					"SAMSUNG ELECTRONICS CO., LTD."),
 			DMI_MATCH(DMI_PRODUCT_NAME, "N128"),
 			DMI_MATCH(DMI_BOARD_NAME, "N128"),
 		},
 		.callback = dmi_check_cb,
 	},
 	{
 		.ident = "N130",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR,
 					"SAMSUNG ELECTRONICS CO., LTD."),
 			DMI_MATCH(DMI_PRODUCT_NAME, "N130"),
 			DMI_MATCH(DMI_BOARD_NAME, "N130"),
 		},
 		.callback = dmi_check_cb,
 	},
 	{
 		.ident = "N510",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR,
 					"SAMSUNG ELECTRONICS CO., LTD."),
 			DMI_MATCH(DMI_PRODUCT_NAME, "N510"),
 			DMI_MATCH(DMI_BOARD_NAME, "N510"),
 		},
 		.callback = dmi_check_cb,
 	},
 	{
 		.ident = "X125",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR,
 					"SAMSUNG ELECTRONICS CO., LTD."),
 			DMI_MATCH(DMI_PRODUCT_NAME, "X125"),
 			DMI_MATCH(DMI_BOARD_NAME, "X125"),
 		},
 		.callback = dmi_check_cb,
 	},
 	{
 		.ident = "X120/X170",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR,
 					"SAMSUNG ELECTRONICS CO., LTD."),
 			DMI_MATCH(DMI_PRODUCT_NAME, "X120/X170"),
 			DMI_MATCH(DMI_BOARD_NAME, "X120/X170"),
 		},
 		.callback = dmi_check_cb,
 	},
 	{
 		.ident = "NC10",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR,
 					"SAMSUNG ELECTRONICS CO., LTD."),
 			DMI_MATCH(DMI_PRODUCT_NAME, "NC10"),
 			DMI_MATCH(DMI_BOARD_NAME, "NC10"),
 		},
 		.callback = dmi_check_cb,
 	},
 		{
 		.ident = "NP-Q45",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR,
 					"SAMSUNG ELECTRONICS CO., LTD."),
 			DMI_MATCH(DMI_PRODUCT_NAME, "SQ45S70S"),
 			DMI_MATCH(DMI_BOARD_NAME, "SQ45S70S"),
 		},
 		.callback = dmi_check_cb,
 		},
 	{
 		.ident = "X360",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR,
 					"SAMSUNG ELECTRONICS CO., LTD."),
 			DMI_MATCH(DMI_PRODUCT_NAME, "X360"),
 			DMI_MATCH(DMI_BOARD_NAME, "X360"),
 		},
 		.callback = dmi_check_cb,
 	},
 	{
 		.ident = "R410 Plus",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR,
 					"SAMSUNG ELECTRONICS CO., LTD."),
 			DMI_MATCH(DMI_PRODUCT_NAME, "R410P"),
 			DMI_MATCH(DMI_BOARD_NAME, "R460"),
 		},
 		.callback = dmi_check_cb,
 	},
 	{
 		.ident = "R518",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR,
 					"SAMSUNG ELECTRONICS CO., LTD."),
 			DMI_MATCH(DMI_PRODUCT_NAME, "R518"),
 			DMI_MATCH(DMI_BOARD_NAME, "R518"),
 		},
 		.callback = dmi_check_cb,
 	},
 	{
 		.ident = "R519/R719",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR,
 					"SAMSUNG ELECTRONICS CO., LTD."),
 			DMI_MATCH(DMI_PRODUCT_NAME, "R519/R719"),
 			DMI_MATCH(DMI_BOARD_NAME, "R519/R719"),
 		},
 		.callback = dmi_check_cb,
 	},
 	{
 		.ident = "N150/N210/N220",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR,
 					"SAMSUNG ELECTRONICS CO., LTD."),
 			DMI_MATCH(DMI_PRODUCT_NAME, "N150/N210/N220"),
 			DMI_MATCH(DMI_BOARD_NAME, "N150/N210/N220"),
 		},
 		.callback = dmi_check_cb,
 	},
 	{
 		.ident = "N150/N210/N220/N230",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR,
 					"SAMSUNG ELECTRONICS CO., LTD."),
 			DMI_MATCH(DMI_PRODUCT_NAME, "N150/N210/N220/N230"),
 			DMI_MATCH(DMI_BOARD_NAME, "N150/N210/N220/N230"),
 		},
 		.callback = dmi_check_cb,
 	},
 	{
 		.ident = "N150P/N210P/N220P",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR,
 					"SAMSUNG ELECTRONICS CO., LTD."),
 			DMI_MATCH(DMI_PRODUCT_NAME, "N150P/N210P/N220P"),
 			DMI_MATCH(DMI_BOARD_NAME, "N150P/N210P/N220P"),
 		},
 		.callback = dmi_check_cb,
 	},
 	{
 		.ident = "R530/R730",
 		.matches = {
 		      DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
 		      DMI_MATCH(DMI_PRODUCT_NAME, "R530/R730"),
 		      DMI_MATCH(DMI_BOARD_NAME, "R530/R730"),
 		},
 		.callback = dmi_check_cb,
 	},
 	{
 		.ident = "NF110/NF210/NF310",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
 			DMI_MATCH(DMI_PRODUCT_NAME, "NF110/NF210/NF310"),
 			DMI_MATCH(DMI_BOARD_NAME, "NF110/NF210/NF310"),
 		},
 		.callback = dmi_check_cb,
 	},
 	{
 		.ident = "N145P/N250P/N260P",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
 			DMI_MATCH(DMI_PRODUCT_NAME, "N145P/N250P/N260P"),
 			DMI_MATCH(DMI_BOARD_NAME, "N145P/N250P/N260P"),
 		},
 		.callback = dmi_check_cb,
 	},
 	{
 		.ident = "R70/R71",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR,
 					"SAMSUNG ELECTRONICS CO., LTD."),
 			DMI_MATCH(DMI_PRODUCT_NAME, "R70/R71"),
 			DMI_MATCH(DMI_BOARD_NAME, "R70/R71"),
 		},
 		.callback = dmi_check_cb,
 	},
 	{
 		.ident = "P460",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
 			DMI_MATCH(DMI_PRODUCT_NAME, "P460"),
 			DMI_MATCH(DMI_BOARD_NAME, "P460"),
 		},
 		.callback = dmi_check_cb,
 	},
 	{
 		.ident = "R528/R728",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
 			DMI_MATCH(DMI_PRODUCT_NAME, "R528/R728"),
 			DMI_MATCH(DMI_BOARD_NAME, "R528/R728"),
 		},
 		.callback = dmi_check_cb,
 	},
 	{ },
 };
 MODULE_DEVICE_TABLE(dmi, samsung_dmi_table);

 static int find_signature(void __iomem *memcheck, const char *testStr)
 {
 	int i = 0;
 	int loca;

 	for (loca = 0; loca < 0xffff; loca++) {
 		char temp = readb(memcheck + loca);

 		if (temp == testStr[i]) {
 			if (i == strlen(testStr)-1)
 				break;
 			++i;
 		} else {
 			i = 0;
 		}
 	}
 	return loca;
 }

 static int __init samsung_init(void)
 {
 	struct backlight_properties props;
 	struct sabi_retval sretval;
 	unsigned int ifaceP;
 	int i;
 	int loca;
 	int retval;

 	mutex_init(&sabi_mutex);

 	if (!force && !dmi_check_system(samsung_dmi_table))
 		return -ENODEV;

 	f0000_segment = ioremap_nocache(0xf0000, 0xffff);
 	if (!f0000_segment) {
 		pr_err("Can't map the segment at 0xf0000\n");
 		return -EINVAL;
 	}

 	/* Try to find one of the signatures in memory to find the header */
 	for (i = 0; sabi_configs[i].test_string != 0; ++i) {
 		sabi_config = &sabi_configs[i];
 		loca = find_signature(f0000_segment, sabi_config->test_string);
 		if (loca != 0xffff)
 			break;
 	}

 	if (loca == 0xffff) {
 		pr_err("This computer does not support SABI\n");
 		goto error_no_signature;
 	}

 	/* point to the SMI port Number */
 	loca += 1;
 	sabi = (f0000_segment + loca);

 	if (debug) {
 		printk(KERN_DEBUG "This computer supports SABI==%x\n",
 			loca + 0xf0000 - 6);
 		printk(KERN_DEBUG "SABI header:\n");
 		printk(KERN_DEBUG " SMI Port Number = 0x%04x\n",
 			readw(sabi + sabi_config->header_offsets.port));
 		printk(KERN_DEBUG " SMI Interface Function = 0x%02x\n",
 			readb(sabi + sabi_config->header_offsets.iface_func));
 		printk(KERN_DEBUG " SMI enable memory buffer = 0x%02x\n",
 			readb(sabi + sabi_config->header_offsets.en_mem));
 		printk(KERN_DEBUG " SMI restore memory buffer = 0x%02x\n",
 			readb(sabi + sabi_config->header_offsets.re_mem));
 		printk(KERN_DEBUG " SABI data offset = 0x%04x\n",
 			readw(sabi + sabi_config->header_offsets.data_offset));
 		printk(KERN_DEBUG " SABI data segment = 0x%04x\n",
 			readw(sabi + sabi_config->header_offsets.data_segment));
 	}

 	/* Get a pointer to the SABI Interface */
 	ifaceP = (readw(sabi + sabi_config->header_offsets.data_segment) & 0x0ffff) << 4;
 	ifaceP += readw(sabi + sabi_config->header_offsets.data_offset) & 0x0ffff;
 	sabi_iface = ioremap_nocache(ifaceP, 16);
 	if (!sabi_iface) {
 		pr_err("Can't remap %x\n", ifaceP);
 		goto exit;
 	}
 	if (debug) {
 		printk(KERN_DEBUG "ifaceP = 0x%08x\n", ifaceP);
 		printk(KERN_DEBUG "sabi_iface = %p\n", sabi_iface);

 		test_backlight();
 		test_wireless();

 		retval = sabi_get_command(sabi_config->commands.get_brightness,
 					  &sretval);
 		printk(KERN_DEBUG "brightness = 0x%02x\n", sretval.retval[0]);
 	}

 	/* Turn on "Linux" mode in the BIOS */
 	if (sabi_config->commands.set_linux != 0xff) {
 		retval = sabi_set_command(sabi_config->commands.set_linux,
 					  0x81);
 		if (retval) {
 			pr_warn("Linux mode was not set!\n");
 			goto error_no_platform;
 		}
 	}

 	/* knock up a platform device to hang stuff off of */
 	sdev = platform_device_register_simple("samsung", -1, NULL, 0);
 	if (IS_ERR(sdev))
 		goto error_no_platform;

 	/* create a backlight device to talk to this one */
 	memset(&props, 0, sizeof(struct backlight_properties));
 	props.type = BACKLIGHT_PLATFORM;
 	props.max_brightness = sabi_config->max_brightness -
 				sabi_config->min_brightness;
 	backlight_device = backlight_device_register("samsung", &sdev->dev,
 						     NULL, &backlight_ops,
 						     &props);
 	if (IS_ERR(backlight_device))
 		goto error_no_backlight;

 	backlight_device->props.brightness = read_brightness();
 	backlight_device->props.power = FB_BLANK_UNBLANK;
 	backlight_update_status(backlight_device);

 	retval = init_wireless(sdev);
 	if (retval)
 		goto error_no_rfk;

 	retval = device_create_file(&sdev->dev, &dev_attr_performance_level);
 	if (retval)
 		goto error_file_create;

 exit:
 	return 0;

 error_file_create:
 	destroy_wireless();

 error_no_rfk:
 	backlight_device_unregister(backlight_device);

 error_no_backlight:
 	platform_device_unregister(sdev);

 error_no_platform:
 	iounmap(sabi_iface);

 error_no_signature:
 	iounmap(f0000_segment);
 	return -EINVAL;
 }

 static void __exit samsung_exit(void)
 {
 	/* Turn off "Linux" mode in the BIOS */
 	if (sabi_config->commands.set_linux != 0xff)
 		sabi_set_command(sabi_config->commands.set_linux, 0x80);

 	device_remove_file(&sdev->dev, &dev_attr_performance_level);
 	backlight_device_unregister(backlight_device);
 	destroy_wireless();
 	iounmap(sabi_iface);
 	iounmap(f0000_segment);
 	platform_device_unregister(sdev);
 }

 module_init(samsung_init);
 module_exit(samsung_exit);

 MODULE_AUTHOR("Greg Kroah-Hartman <gregkh@suse.de>");
 MODULE_DESCRIPTION("Samsung Backlight driver");
 MODULE_LICENSE("GPL");
	/*
	* Samsung Laptop driver
	*
	* Copyright (C) 2009,2011 Greg Kroah-Hartman (gregkh@suse.de)
	* Copyright (C) 2009,2011 Novell Inc.
	*
	* This program is free software; you can redistribute it and/or modify it
	* under the terms of the GNU General Public License version 2 as published by
	* the Free Software Foundation.
	*
	*/
	#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt

	#include <linux/kernel.h>
	#include <linux/init.h>
	#include <linux/module.h>
	#include <linux/delay.h>
	#include <linux/pci.h>
	#include <linux/backlight.h>
	#include <linux/fb.h>
	#include <linux/dmi.h>
	#include <linux/platform_device.h>
	#include <linux/rfkill.h>

	/*
	* This driver is needed because a number of Samsung laptops do not hook
	* their control settings through ACPI. So we have to poke around in the
	* BIOS to do things like brightness values, and "special" key controls.
	*/

	/*
	* We have 0 - 8 as valid brightness levels. The specs say that level 0 should
	* be reserved by the BIOS (which really doesn't make much sense), we tell
	* userspace that the value is 0 - 7 and then just tell the hardware 1 - 8
	*/
	#define MAX_BRIGHT 0x07


	#define SABI_IFACE_MAIN 0x00
	#define SABI_IFACE_SUB 0x02
	#define SABI_IFACE_COMPLETE 0x04
	#define SABI_IFACE_DATA 0x05

	/* Structure to get data back to the calling function */
	struct sabi_retval {
	u8 retval[20];
	};

	struct sabi_header_offsets {
	u8 port;
	u8 re_mem;
	u8 iface_func;
	u8 en_mem;
	u8 data_offset;
	u8 data_segment;
	};

	struct sabi_commands {
	/*
	* Brightness is 0 - 8, as described above.
	* Value 0 is for the BIOS to use
	*/
	u8 get_brightness;
	u8 set_brightness;

	/*
	* first byte:
	* 0x00 - wireless is off
	* 0x01 - wireless is on
	* second byte:
	* 0x02 - 3G is off
	* 0x03 - 3G is on
	* TODO, verify 3G is correct, that doesn't seem right...
	*/
	u8 get_wireless_button;
	u8 set_wireless_button;

	/* 0 is off, 1 is on */
	u8 get_backlight;
	u8 set_backlight;

	/*
	* 0x80 or 0x00 - no action
	* 0x81 - recovery key pressed
	*/
	u8 get_recovery_mode;
	u8 set_recovery_mode;

	/*
	* on seclinux: 0 is low, 1 is high,
	* on swsmi: 0 is normal, 1 is silent, 2 is turbo
	*/
	u8 get_performance_level;
	u8 set_performance_level;

	/*
	* Tell the BIOS that Linux is running on this machine.
	* 81 is on, 80 is off
	*/
	u8 set_linux;
	};

	struct sabi_performance_level {
	const char *name;
	u8 value;
	};

	struct sabi_config {
	const char *test_string;
	u16 main_function;
	const struct sabi_header_offsets header_offsets;
	const struct sabi_commands commands;
	const struct sabi_performance_level performance_levels[4];
	u8 min_brightness;
	u8 max_brightness;
	};

	static const struct sabi_config sabi_configs[] = {
	{
	.test_string = "SECLINUX",

	.main_function = 0x4c49,

	.header_offsets = {
	.port = 0x00,
	.re_mem = 0x02,
	.iface_func = 0x03,
	.en_mem = 0x04,
	.data_offset = 0x05,
	.data_segment = 0x07,
	},

	.commands = {
	.get_brightness = 0x00,
	.set_brightness = 0x01,

	.get_wireless_button = 0x02,
	.set_wireless_button = 0x03,

	.get_backlight = 0x04,
	.set_backlight = 0x05,

	.get_recovery_mode = 0x06,
	.set_recovery_mode = 0x07,

	.get_performance_level = 0x08,
	.set_performance_level = 0x09,

	.set_linux = 0x0a,
	},

	.performance_levels = {
	{
	.name = "silent",
	.value = 0,
	},
	{
	.name = "normal",
	.value = 1,
	},
	{ },
	},
	.min_brightness = 1,
	.max_brightness = 8,
	},
	{
	.test_string = "SwSmi@",

	.main_function = 0x5843,

	.header_offsets = {
	.port = 0x00,
	.re_mem = 0x04,
	.iface_func = 0x02,
	.en_mem = 0x03,
	.data_offset = 0x05,
	.data_segment = 0x07,
	},

	.commands = {
	.get_brightness = 0x10,
	.set_brightness = 0x11,

	.get_wireless_button = 0x12,
	.set_wireless_button = 0x13,

	.get_backlight = 0x2d,
	.set_backlight = 0x2e,

	.get_recovery_mode = 0xff,
	.set_recovery_mode = 0xff,

	.get_performance_level = 0x31,
	.set_performance_level = 0x32,

	.set_linux = 0xff,
	},

	.performance_levels = {
	{
	.name = "normal",
	.value = 0,
	},
	{
	.name = "silent",
	.value = 1,
	},
	{
	.name = "overclock",
	.value = 2,
	},
	{ },
	},
	.min_brightness = 0,
	.max_brightness = 8,
	},
	{ },
	};

	static const struct sabi_config *sabi_config;

	static void __iomem *sabi;
	static void __iomem *sabi_iface;
	static void __iomem *f0000_segment;
	static struct backlight_device *backlight_device;
	static struct mutex sabi_mutex;
	static struct platform_device *sdev;
	static struct rfkill *rfk;

	static int force;
	module_param(force, bool, 0);
	MODULE_PARM_DESC(force,
	"Disable the DMI check and forces the driver to be loaded");

	static int debug;
	module_param(debug, bool, S_IRUGO \| S_IWUSR);
	MODULE_PARM_DESC(debug, "Debug enabled or not");

	static int sabi_get_command(u8 command, struct sabi_retval *sretval)
	{
	int retval = 0;
	u16 port = readw(sabi + sabi_config->header_offsets.port);
	u8 complete, iface_data;

	mutex_lock(&sabi_mutex);

	/* enable memory to be able to write to it */
	outb(readb(sabi + sabi_config->header_offsets.en_mem), port);

	/* write out the command */
	writew(sabi_config->main_function, sabi_iface + SABI_IFACE_MAIN);
	writew(command, sabi_iface + SABI_IFACE_SUB);
	writeb(0, sabi_iface + SABI_IFACE_COMPLETE);
	outb(readb(sabi + sabi_config->header_offsets.iface_func), port);

	/* write protect memory to make it safe */
	outb(readb(sabi + sabi_config->header_offsets.re_mem), port);

	/* see if the command actually succeeded */
	complete = readb(sabi_iface + SABI_IFACE_COMPLETE);
	iface_data = readb(sabi_iface + SABI_IFACE_DATA);
	if (complete != 0xaa \|\| iface_data == 0xff) {
	pr_warn("SABI get command 0x%02x failed with completion flag 0x%02x and data 0x%02x\n",
	command, complete, iface_data);
	retval = -EINVAL;
	goto exit;
	}
	/*
	* Save off the data into a structure so the caller use it.
	* Right now we only want the first 4 bytes,
	* There are commands that need more, but not for the ones we
	* currently care about.
	*/
	sretval->retval[0] = readb(sabi_iface + SABI_IFACE_DATA);
	sretval->retval[1] = readb(sabi_iface + SABI_IFACE_DATA + 1);
	sretval->retval[2] = readb(sabi_iface + SABI_IFACE_DATA + 2);
	sretval->retval[3] = readb(sabi_iface + SABI_IFACE_DATA + 3);

	exit:
	mutex_unlock(&sabi_mutex);
	return retval;

	}

	static int sabi_set_command(u8 command, u8 data)
	{
	int retval = 0;
	u16 port = readw(sabi + sabi_config->header_offsets.port);
	u8 complete, iface_data;

	mutex_lock(&sabi_mutex);

	/* enable memory to be able to write to it */
	outb(readb(sabi + sabi_config->header_offsets.en_mem), port);

	/* write out the command */
	writew(sabi_config->main_function, sabi_iface + SABI_IFACE_MAIN);
	writew(command, sabi_iface + SABI_IFACE_SUB);
	writeb(0, sabi_iface + SABI_IFACE_COMPLETE);
	writeb(data, sabi_iface + SABI_IFACE_DATA);
	outb(readb(sabi + sabi_config->header_offsets.iface_func), port);

	/* write protect memory to make it safe */
	outb(readb(sabi + sabi_config->header_offsets.re_mem), port);

	/* see if the command actually succeeded */
	complete = readb(sabi_iface + SABI_IFACE_COMPLETE);
	iface_data = readb(sabi_iface + SABI_IFACE_DATA);
	if (complete != 0xaa \|\| iface_data == 0xff) {
	pr_warn("SABI set command 0x%02x failed with completion flag 0x%02x and data 0x%02x\n",
	command, complete, iface_data);
	retval = -EINVAL;
	}

	mutex_unlock(&sabi_mutex);
	return retval;
	}

	static void test_backlight(void)
	{
	struct sabi_retval sretval;

	sabi_get_command(sabi_config->commands.get_backlight, &sretval);
	printk(KERN_DEBUG "backlight = 0x%02x\n", sretval.retval[0]);

	sabi_set_command(sabi_config->commands.set_backlight, 0);
	printk(KERN_DEBUG "backlight should be off\n");

	sabi_get_command(sabi_config->commands.get_backlight, &sretval);
	printk(KERN_DEBUG "backlight = 0x%02x\n", sretval.retval[0]);

	msleep(1000);

	sabi_set_command(sabi_config->commands.set_backlight, 1);
	printk(KERN_DEBUG "backlight should be on\n");

	sabi_get_command(sabi_config->commands.get_backlight, &sretval);
	printk(KERN_DEBUG "backlight = 0x%02x\n", sretval.retval[0]);
	}

	static void test_wireless(void)
	{
	struct sabi_retval sretval;

	sabi_get_command(sabi_config->commands.get_wireless_button, &sretval);
	printk(KERN_DEBUG "wireless led = 0x%02x\n", sretval.retval[0]);

	sabi_set_command(sabi_config->commands.set_wireless_button, 0);
	printk(KERN_DEBUG "wireless led should be off\n");

	sabi_get_command(sabi_config->commands.get_wireless_button, &sretval);
	printk(KERN_DEBUG "wireless led = 0x%02x\n", sretval.retval[0]);

	msleep(1000);

	sabi_set_command(sabi_config->commands.set_wireless_button, 1);
	printk(KERN_DEBUG "wireless led should be on\n");

	sabi_get_command(sabi_config->commands.get_wireless_button, &sretval);
	printk(KERN_DEBUG "wireless led = 0x%02x\n", sretval.retval[0]);
	}

	static u8 read_brightness(void)
	{
	struct sabi_retval sretval;
	int user_brightness = 0;
	int retval;

	retval = sabi_get_command(sabi_config->commands.get_brightness,
	&sretval);
	if (!retval) {
	user_brightness = sretval.retval[0];
	if (user_brightness > sabi_config->min_brightness)
	user_brightness -= sabi_config->min_brightness;
	else
	user_brightness = 0;
	}
	return user_brightness;
	}

	static void set_brightness(u8 user_brightness)
	{
	u8 user_level = user_brightness + sabi_config->min_brightness;

	sabi_set_command(sabi_config->commands.set_brightness, user_level);
	}

	static int get_brightness(struct backlight_device *bd)
	{
	return (int)read_brightness();
	}

	static int update_status(struct backlight_device *bd)
	{
	set_brightness(bd->props.brightness);

	if (bd->props.power == FB_BLANK_UNBLANK)
	sabi_set_command(sabi_config->commands.set_backlight, 1);
	else
	sabi_set_command(sabi_config->commands.set_backlight, 0);
	return 0;
	}

	static const struct backlight_ops backlight_ops = {
	.get_brightness = get_brightness,
	.update_status = update_status,
	};

	static int rfkill_set(void *data, bool blocked)
	{
	/* Do something with blocked...*/
	/*
	* blocked == false is on
	* blocked == true is off
	*/
	if (blocked)
	sabi_set_command(sabi_config->commands.set_wireless_button, 0);
	else
	sabi_set_command(sabi_config->commands.set_wireless_button, 1);

	return 0;
	}

	static struct rfkill_ops rfkill_ops = {
	.set_block = rfkill_set,
	};

	static int init_wireless(struct platform_device *sdev)
	{
	int retval;

	rfk = rfkill_alloc("samsung-wifi", &sdev->dev, RFKILL_TYPE_WLAN,
	&rfkill_ops, NULL);
	if (!rfk)
	return -ENOMEM;

	retval = rfkill_register(rfk);
	if (retval) {
	rfkill_destroy(rfk);
	return -ENODEV;
	}

	return 0;
	}

	static void destroy_wireless(void)
	{
	rfkill_unregister(rfk);
	rfkill_destroy(rfk);
	}

	static ssize_t get_performance_level(struct device *dev,
	struct device_attribute attr, char buf)
	{
	struct sabi_retval sretval;
	int retval;
	int i;

	/* Read the state */
	retval = sabi_get_command(sabi_config->commands.get_performance_level,
	&sretval);
	if (retval)
	return retval;

	/* The logic is backwards, yeah, lots of fun... */
	for (i = 0; sabi_config->performance_levels[i].name; ++i) {
	if (sretval.retval[0] == sabi_config->performance_levels[i].value)
	return sprintf(buf, "%s\n", sabi_config->performance_levels[i].name);
	}
	return sprintf(buf, "%s\n", "unknown");
	}

	static ssize_t set_performance_level(struct device *dev,
	struct device_attribute attr, const char buf,
	size_t count)
	{
	if (count >= 1) {
	int i;
	for (i = 0; sabi_config->performance_levels[i].name; ++i) {
	const struct sabi_performance_level *level =
	&sabi_config->performance_levels[i];
	if (!strncasecmp(level->name, buf, strlen(level->name))) {
	sabi_set_command(sabi_config->commands.set_performance_level,
	level->value);
	break;
	}
	}
	if (!sabi_config->performance_levels[i].name)
	return -EINVAL;
	}
	return count;
	}
	static DEVICE_ATTR(performance_level, S_IWUSR \| S_IRUGO,
	get_performance_level, set_performance_level);


	static int __init dmi_check_cb(const struct dmi_system_id *id)
	{
	pr_info("found laptop model '%s'\n",
	id->ident);
	return 1;
	}

	static struct dmi_system_id __initdata samsung_dmi_table[] = {
	{
	.ident = "N128",
	.matches = {
	DMI_MATCH(DMI_SYS_VENDOR,
	"SAMSUNG ELECTRONICS CO., LTD."),
	DMI_MATCH(DMI_PRODUCT_NAME, "N128"),
	DMI_MATCH(DMI_BOARD_NAME, "N128"),
	},
	.callback = dmi_check_cb,
	},
	{
	.ident = "N130",
	.matches = {
	DMI_MATCH(DMI_SYS_VENDOR,
	"SAMSUNG ELECTRONICS CO., LTD."),
	DMI_MATCH(DMI_PRODUCT_NAME, "N130"),
	DMI_MATCH(DMI_BOARD_NAME, "N130"),
	},
	.callback = dmi_check_cb,
	},
	{
	.ident = "N510",
	.matches = {
	DMI_MATCH(DMI_SYS_VENDOR,
	"SAMSUNG ELECTRONICS CO., LTD."),
	DMI_MATCH(DMI_PRODUCT_NAME, "N510"),
	DMI_MATCH(DMI_BOARD_NAME, "N510"),
	},
	.callback = dmi_check_cb,
	},
	{
	.ident = "X125",
	.matches = {
	DMI_MATCH(DMI_SYS_VENDOR,
	"SAMSUNG ELECTRONICS CO., LTD."),
	DMI_MATCH(DMI_PRODUCT_NAME, "X125"),
	DMI_MATCH(DMI_BOARD_NAME, "X125"),
	},
	.callback = dmi_check_cb,
	},
	{
	.ident = "X120/X170",
	.matches = {
	DMI_MATCH(DMI_SYS_VENDOR,
	"SAMSUNG ELECTRONICS CO., LTD."),
	DMI_MATCH(DMI_PRODUCT_NAME, "X120/X170"),
	DMI_MATCH(DMI_BOARD_NAME, "X120/X170"),
	},
	.callback = dmi_check_cb,
	},
	{
	.ident = "NC10",
	.matches = {
	DMI_MATCH(DMI_SYS_VENDOR,
	"SAMSUNG ELECTRONICS CO., LTD."),
	DMI_MATCH(DMI_PRODUCT_NAME, "NC10"),
	DMI_MATCH(DMI_BOARD_NAME, "NC10"),
	},
	.callback = dmi_check_cb,
	},
	{
	.ident = "NP-Q45",
	.matches = {
	DMI_MATCH(DMI_SYS_VENDOR,
	"SAMSUNG ELECTRONICS CO., LTD."),
	DMI_MATCH(DMI_PRODUCT_NAME, "SQ45S70S"),
	DMI_MATCH(DMI_BOARD_NAME, "SQ45S70S"),
	},
	.callback = dmi_check_cb,
	},
	{
	.ident = "X360",
	.matches = {
	DMI_MATCH(DMI_SYS_VENDOR,
	"SAMSUNG ELECTRONICS CO., LTD."),
	DMI_MATCH(DMI_PRODUCT_NAME, "X360"),
	DMI_MATCH(DMI_BOARD_NAME, "X360"),
	},
	.callback = dmi_check_cb,
	},
	{
	.ident = "R410 Plus",
	.matches = {
	DMI_MATCH(DMI_SYS_VENDOR,
	"SAMSUNG ELECTRONICS CO., LTD."),
	DMI_MATCH(DMI_PRODUCT_NAME, "R410P"),
	DMI_MATCH(DMI_BOARD_NAME, "R460"),
	},
	.callback = dmi_check_cb,
	},
	{
	.ident = "R518",
	.matches = {
	DMI_MATCH(DMI_SYS_VENDOR,
	"SAMSUNG ELECTRONICS CO., LTD."),
	DMI_MATCH(DMI_PRODUCT_NAME, "R518"),
	DMI_MATCH(DMI_BOARD_NAME, "R518"),
	},
	.callback = dmi_check_cb,
	},
	{
	.ident = "R519/R719",
	.matches = {
	DMI_MATCH(DMI_SYS_VENDOR,
	"SAMSUNG ELECTRONICS CO., LTD."),
	DMI_MATCH(DMI_PRODUCT_NAME, "R519/R719"),
	DMI_MATCH(DMI_BOARD_NAME, "R519/R719"),
	},
	.callback = dmi_check_cb,
	},
	{
	.ident = "N150/N210/N220",
	.matches = {
	DMI_MATCH(DMI_SYS_VENDOR,
	"SAMSUNG ELECTRONICS CO., LTD."),
	DMI_MATCH(DMI_PRODUCT_NAME, "N150/N210/N220"),
	DMI_MATCH(DMI_BOARD_NAME, "N150/N210/N220"),
	},
	.callback = dmi_check_cb,
	},
	{
	.ident = "N150/N210/N220/N230",
	.matches = {
	DMI_MATCH(DMI_SYS_VENDOR,
	"SAMSUNG ELECTRONICS CO., LTD."),
	DMI_MATCH(DMI_PRODUCT_NAME, "N150/N210/N220/N230"),
	DMI_MATCH(DMI_BOARD_NAME, "N150/N210/N220/N230"),
	},
	.callback = dmi_check_cb,
	},
	{
	.ident = "N150P/N210P/N220P",
	.matches = {
	DMI_MATCH(DMI_SYS_VENDOR,
	"SAMSUNG ELECTRONICS CO., LTD."),
	DMI_MATCH(DMI_PRODUCT_NAME, "N150P/N210P/N220P"),
	DMI_MATCH(DMI_BOARD_NAME, "N150P/N210P/N220P"),
	},
	.callback = dmi_check_cb,
	},
	{
	.ident = "R530/R730",
	.matches = {
	DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
	DMI_MATCH(DMI_PRODUCT_NAME, "R530/R730"),
	DMI_MATCH(DMI_BOARD_NAME, "R530/R730"),
	},
	.callback = dmi_check_cb,
	},
	{
	.ident = "NF110/NF210/NF310",
	.matches = {
	DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
	DMI_MATCH(DMI_PRODUCT_NAME, "NF110/NF210/NF310"),
	DMI_MATCH(DMI_BOARD_NAME, "NF110/NF210/NF310"),
	},
	.callback = dmi_check_cb,
	},
	{
	.ident = "N145P/N250P/N260P",
	.matches = {
	DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
	DMI_MATCH(DMI_PRODUCT_NAME, "N145P/N250P/N260P"),
	DMI_MATCH(DMI_BOARD_NAME, "N145P/N250P/N260P"),
	},
	.callback = dmi_check_cb,
	},
	{
	.ident = "R70/R71",
	.matches = {
	DMI_MATCH(DMI_SYS_VENDOR,
	"SAMSUNG ELECTRONICS CO., LTD."),
	DMI_MATCH(DMI_PRODUCT_NAME, "R70/R71"),
	DMI_MATCH(DMI_BOARD_NAME, "R70/R71"),
	},
	.callback = dmi_check_cb,
	},
	{
	.ident = "P460",
	.matches = {
	DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
	DMI_MATCH(DMI_PRODUCT_NAME, "P460"),
	DMI_MATCH(DMI_BOARD_NAME, "P460"),
	},
	.callback = dmi_check_cb,
	},
	{
	.ident = "R528/R728",
	.matches = {
	DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
	DMI_MATCH(DMI_PRODUCT_NAME, "R528/R728"),
	DMI_MATCH(DMI_BOARD_NAME, "R528/R728"),
	},
	.callback = dmi_check_cb,
	},
	{ },
	};
	MODULE_DEVICE_TABLE(dmi, samsung_dmi_table);

	static int find_signature(void __iomem memcheck, const char testStr)
	{
	int i = 0;
	int loca;

	for (loca = 0; loca < 0xffff; loca++) {
	char temp = readb(memcheck + loca);

	if (temp == testStr[i]) {
	if (i == strlen(testStr)-1)
	break;
	++i;
	} else {
	i = 0;
	}
	}
	return loca;
	}

	static int __init samsung_init(void)
	{
	struct backlight_properties props;
	struct sabi_retval sretval;
	unsigned int ifaceP;
	int i;
	int loca;
	int retval;

	mutex_init(&sabi_mutex);

	if (!force && !dmi_check_system(samsung_dmi_table))
	return -ENODEV;

	f0000_segment = ioremap_nocache(0xf0000, 0xffff);
	if (!f0000_segment) {
	pr_err("Can't map the segment at 0xf0000\n");
	return -EINVAL;
	}

	/* Try to find one of the signatures in memory to find the header */
	for (i = 0; sabi_configs[i].test_string != 0; ++i) {
	sabi_config = &sabi_configs[i];
	loca = find_signature(f0000_segment, sabi_config->test_string);
	if (loca != 0xffff)
	break;
	}

	if (loca == 0xffff) {
	pr_err("This computer does not support SABI\n");
	goto error_no_signature;
	}

	/* point to the SMI port Number */
	loca += 1;
	sabi = (f0000_segment + loca);

	if (debug) {
	printk(KERN_DEBUG "This computer supports SABI==%x\n",
	loca + 0xf0000 - 6);
	printk(KERN_DEBUG "SABI header:\n");
	printk(KERN_DEBUG " SMI Port Number = 0x%04x\n",
	readw(sabi + sabi_config->header_offsets.port));
	printk(KERN_DEBUG " SMI Interface Function = 0x%02x\n",
	readb(sabi + sabi_config->header_offsets.iface_func));
	printk(KERN_DEBUG " SMI enable memory buffer = 0x%02x\n",
	readb(sabi + sabi_config->header_offsets.en_mem));
	printk(KERN_DEBUG " SMI restore memory buffer = 0x%02x\n",
	readb(sabi + sabi_config->header_offsets.re_mem));
	printk(KERN_DEBUG " SABI data offset = 0x%04x\n",
	readw(sabi + sabi_config->header_offsets.data_offset));
	printk(KERN_DEBUG " SABI data segment = 0x%04x\n",
	readw(sabi + sabi_config->header_offsets.data_segment));
	}

	/* Get a pointer to the SABI Interface */
	ifaceP = (readw(sabi + sabi_config->header_offsets.data_segment) & 0x0ffff) << 4;
	ifaceP += readw(sabi + sabi_config->header_offsets.data_offset) & 0x0ffff;
	sabi_iface = ioremap_nocache(ifaceP, 16);
	if (!sabi_iface) {
	pr_err("Can't remap %x\n", ifaceP);
	goto exit;
	}
	if (debug) {
	printk(KERN_DEBUG "ifaceP = 0x%08x\n", ifaceP);
	printk(KERN_DEBUG "sabi_iface = %p\n", sabi_iface);

	test_backlight();
	test_wireless();

	retval = sabi_get_command(sabi_config->commands.get_brightness,
	&sretval);
	printk(KERN_DEBUG "brightness = 0x%02x\n", sretval.retval[0]);
	}

	/* Turn on "Linux" mode in the BIOS */
	if (sabi_config->commands.set_linux != 0xff) {
	retval = sabi_set_command(sabi_config->commands.set_linux,
	0x81);
	if (retval) {
	pr_warn("Linux mode was not set!\n");
	goto error_no_platform;
	}
	}

	/* knock up a platform device to hang stuff off of */
	sdev = platform_device_register_simple("samsung", -1, NULL, 0);
	if (IS_ERR(sdev))
	goto error_no_platform;

	/* create a backlight device to talk to this one */
	memset(&props, 0, sizeof(struct backlight_properties));
	props.type = BACKLIGHT_PLATFORM;
	props.max_brightness = sabi_config->max_brightness -
	sabi_config->min_brightness;
	backlight_device = backlight_device_register("samsung", &sdev->dev,
	NULL, &backlight_ops,
	&props);
	if (IS_ERR(backlight_device))
	goto error_no_backlight;

	backlight_device->props.brightness = read_brightness();
	backlight_device->props.power = FB_BLANK_UNBLANK;
	backlight_update_status(backlight_device);

	retval = init_wireless(sdev);
	if (retval)
	goto error_no_rfk;

	retval = device_create_file(&sdev->dev, &dev_attr_performance_level);
	if (retval)
	goto error_file_create;

	exit:
	return 0;

	error_file_create:
	destroy_wireless();

	error_no_rfk:
	backlight_device_unregister(backlight_device);

	error_no_backlight:
	platform_device_unregister(sdev);

	error_no_platform:
	iounmap(sabi_iface);

	error_no_signature:
	iounmap(f0000_segment);
	return -EINVAL;
	}

	static void __exit samsung_exit(void)
	{
	/* Turn off "Linux" mode in the BIOS */
	if (sabi_config->commands.set_linux != 0xff)
	sabi_set_command(sabi_config->commands.set_linux, 0x80);

	device_remove_file(&sdev->dev, &dev_attr_performance_level);
	backlight_device_unregister(backlight_device);
	destroy_wireless();
	iounmap(sabi_iface);
	iounmap(f0000_segment);
	platform_device_unregister(sdev);
	}

	module_init(samsung_init);
	module_exit(samsung_exit);

	MODULE_AUTHOR("Greg Kroah-Hartman <gregkh@suse.de>");
	MODULE_DESCRIPTION("Samsung Backlight driver");
	MODULE_LICENSE("GPL");