mmc: tmio: refactor set_clock a little
Some of the indentation made the code awful to read. Fix that. Also,
introduce defines instead of magic hex values. Note that this includes
one change: We mask out know 0xff instead of 0x1ff. But 0x100 has always
been the clock enable bit. It doesn't make any sense to set it depending
on the clock calculation. Update copyright notices, too. I'll be working
on those files some more in the future.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c
index 207e77a..7f6b5ad 100644
--- a/drivers/mmc/host/tmio_mmc_pio.c
+++ b/drivers/mmc/host/tmio_mmc_pio.c
@@ -1,6 +1,8 @@
/*
* linux/drivers/mmc/host/tmio_mmc_pio.c
*
+ * Copyright (C) 2016 Sang Engineering, Wolfram Sang
+ * Copyright (C) 2015-16 Renesas Electronics Corporation
* Copyright (C) 2011 Guennadi Liakhovetski
* Copyright (C) 2007 Ian Molton
* Copyright (C) 2004 Ian Molton
@@ -159,19 +161,20 @@
if (new_clock) {
for (clock = host->mmc->f_min, clk = 0x80000080;
- new_clock >= (clock<<1); clk >>= 1)
+ new_clock >= (clock << 1);
+ clk >>= 1)
clock <<= 1;
/* 1/1 clock is option */
if ((host->pdata->flags & TMIO_MMC_CLK_ACTUAL) &&
- ((clk >> 22) & 0x1))
+ ((clk >> 22) & 0x1))
clk |= 0xff;
}
if (host->set_clk_div)
- host->set_clk_div(host->pdev, (clk>>22) & 1);
+ host->set_clk_div(host->pdev, (clk >> 22) & 1);
- sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, clk & 0x1ff);
+ sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, clk & CLK_CTL_DIV_MASK);
if (!(host->pdata->flags & TMIO_MMC_FAST_CLK_CHG))
msleep(10);
}
@@ -183,14 +186,14 @@
msleep(10);
}
- sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, ~0x0100 &
+ sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, ~CLK_CTL_SCLKEN &
sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL));
msleep(host->pdata->flags & TMIO_MMC_FAST_CLK_CHG ? 5 : 10);
}
static void tmio_mmc_clk_start(struct tmio_mmc_host *host)
{
- sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, 0x0100 |
+ sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, CLK_CTL_SCLKEN |
sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL));
msleep(host->pdata->flags & TMIO_MMC_FAST_CLK_CHG ? 1 : 10);