| /* |
| * ALSA driver for ATI IXP 150/200/250 AC97 modem controllers |
| * |
| * Copyright (c) 2004 Takashi Iwai <tiwai@suse.de> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| * |
| */ |
| |
| #include <sound/driver.h> |
| #include <asm/io.h> |
| #include <linux/delay.h> |
| #include <linux/interrupt.h> |
| #include <linux/init.h> |
| #include <linux/pci.h> |
| #include <linux/slab.h> |
| #include <linux/moduleparam.h> |
| #include <sound/core.h> |
| #include <sound/pcm.h> |
| #include <sound/pcm_params.h> |
| #include <sound/info.h> |
| #include <sound/ac97_codec.h> |
| #include <sound/initval.h> |
| |
| MODULE_AUTHOR("Takashi Iwai <tiwai@suse.de>"); |
| MODULE_DESCRIPTION("ATI IXP MC97 controller"); |
| MODULE_LICENSE("GPL"); |
| MODULE_SUPPORTED_DEVICE("{{ATI,IXP150/200/250}}"); |
| |
| static int index = -2; /* Exclude the first card */ |
| static char *id = SNDRV_DEFAULT_STR1; /* ID for this card */ |
| static int ac97_clock = 48000; |
| |
| module_param(index, int, 0444); |
| MODULE_PARM_DESC(index, "Index value for ATI IXP controller."); |
| module_param(id, charp, 0444); |
| MODULE_PARM_DESC(id, "ID string for ATI IXP controller."); |
| module_param(ac97_clock, int, 0444); |
| MODULE_PARM_DESC(ac97_clock, "AC'97 codec clock (default 48000Hz)."); |
| |
| /* just for backward compatibility */ |
| static int enable; |
| module_param(enable, bool, 0444); |
| |
| |
| /* |
| */ |
| |
| #define ATI_REG_ISR 0x00 /* interrupt source */ |
| #define ATI_REG_ISR_MODEM_IN_XRUN (1U<<0) |
| #define ATI_REG_ISR_MODEM_IN_STATUS (1U<<1) |
| #define ATI_REG_ISR_MODEM_OUT1_XRUN (1U<<2) |
| #define ATI_REG_ISR_MODEM_OUT1_STATUS (1U<<3) |
| #define ATI_REG_ISR_MODEM_OUT2_XRUN (1U<<4) |
| #define ATI_REG_ISR_MODEM_OUT2_STATUS (1U<<5) |
| #define ATI_REG_ISR_MODEM_OUT3_XRUN (1U<<6) |
| #define ATI_REG_ISR_MODEM_OUT3_STATUS (1U<<7) |
| #define ATI_REG_ISR_PHYS_INTR (1U<<8) |
| #define ATI_REG_ISR_PHYS_MISMATCH (1U<<9) |
| #define ATI_REG_ISR_CODEC0_NOT_READY (1U<<10) |
| #define ATI_REG_ISR_CODEC1_NOT_READY (1U<<11) |
| #define ATI_REG_ISR_CODEC2_NOT_READY (1U<<12) |
| #define ATI_REG_ISR_NEW_FRAME (1U<<13) |
| #define ATI_REG_ISR_MODEM_GPIO_DATA (1U<<14) |
| |
| #define ATI_REG_IER 0x04 /* interrupt enable */ |
| #define ATI_REG_IER_MODEM_IN_XRUN_EN (1U<<0) |
| #define ATI_REG_IER_MODEM_STATUS_EN (1U<<1) |
| #define ATI_REG_IER_MODEM_OUT1_XRUN_EN (1U<<2) |
| #define ATI_REG_IER_MODEM_OUT2_XRUN_EN (1U<<4) |
| #define ATI_REG_IER_MODEM_OUT3_XRUN_EN (1U<<6) |
| #define ATI_REG_IER_PHYS_INTR_EN (1U<<8) |
| #define ATI_REG_IER_PHYS_MISMATCH_EN (1U<<9) |
| #define ATI_REG_IER_CODEC0_INTR_EN (1U<<10) |
| #define ATI_REG_IER_CODEC1_INTR_EN (1U<<11) |
| #define ATI_REG_IER_CODEC2_INTR_EN (1U<<12) |
| #define ATI_REG_IER_NEW_FRAME_EN (1U<<13) /* (RO */ |
| #define ATI_REG_IER_MODEM_GPIO_DATA_EN (1U<<14) /* (WO) modem is running */ |
| #define ATI_REG_IER_MODEM_SET_BUS_BUSY (1U<<15) |
| |
| #define ATI_REG_CMD 0x08 /* command */ |
| #define ATI_REG_CMD_POWERDOWN (1U<<0) |
| #define ATI_REG_CMD_MODEM_RECEIVE_EN (1U<<1) /* modem only */ |
| #define ATI_REG_CMD_MODEM_SEND1_EN (1U<<2) /* modem only */ |
| #define ATI_REG_CMD_MODEM_SEND2_EN (1U<<3) /* modem only */ |
| #define ATI_REG_CMD_MODEM_SEND3_EN (1U<<4) /* modem only */ |
| #define ATI_REG_CMD_MODEM_STATUS_MEM (1U<<5) /* modem only */ |
| #define ATI_REG_CMD_MODEM_IN_DMA_EN (1U<<8) /* modem only */ |
| #define ATI_REG_CMD_MODEM_OUT_DMA1_EN (1U<<9) /* modem only */ |
| #define ATI_REG_CMD_MODEM_OUT_DMA2_EN (1U<<10) /* modem only */ |
| #define ATI_REG_CMD_MODEM_OUT_DMA3_EN (1U<<11) /* modem only */ |
| #define ATI_REG_CMD_AUDIO_PRESENT (1U<<20) |
| #define ATI_REG_CMD_MODEM_GPIO_THRU_DMA (1U<<22) /* modem only */ |
| #define ATI_REG_CMD_LOOPBACK_EN (1U<<23) |
| #define ATI_REG_CMD_PACKED_DIS (1U<<24) |
| #define ATI_REG_CMD_BURST_EN (1U<<25) |
| #define ATI_REG_CMD_PANIC_EN (1U<<26) |
| #define ATI_REG_CMD_MODEM_PRESENT (1U<<27) |
| #define ATI_REG_CMD_ACLINK_ACTIVE (1U<<28) |
| #define ATI_REG_CMD_AC_SOFT_RESET (1U<<29) |
| #define ATI_REG_CMD_AC_SYNC (1U<<30) |
| #define ATI_REG_CMD_AC_RESET (1U<<31) |
| |
| #define ATI_REG_PHYS_OUT_ADDR 0x0c |
| #define ATI_REG_PHYS_OUT_CODEC_MASK (3U<<0) |
| #define ATI_REG_PHYS_OUT_RW (1U<<2) |
| #define ATI_REG_PHYS_OUT_ADDR_EN (1U<<8) |
| #define ATI_REG_PHYS_OUT_ADDR_SHIFT 9 |
| #define ATI_REG_PHYS_OUT_DATA_SHIFT 16 |
| |
| #define ATI_REG_PHYS_IN_ADDR 0x10 |
| #define ATI_REG_PHYS_IN_READ_FLAG (1U<<8) |
| #define ATI_REG_PHYS_IN_ADDR_SHIFT 9 |
| #define ATI_REG_PHYS_IN_DATA_SHIFT 16 |
| |
| #define ATI_REG_SLOTREQ 0x14 |
| |
| #define ATI_REG_COUNTER 0x18 |
| #define ATI_REG_COUNTER_SLOT (3U<<0) /* slot # */ |
| #define ATI_REG_COUNTER_BITCLOCK (31U<<8) |
| |
| #define ATI_REG_IN_FIFO_THRESHOLD 0x1c |
| |
| #define ATI_REG_MODEM_IN_DMA_LINKPTR 0x20 |
| #define ATI_REG_MODEM_IN_DMA_DT_START 0x24 /* RO */ |
| #define ATI_REG_MODEM_IN_DMA_DT_NEXT 0x28 /* RO */ |
| #define ATI_REG_MODEM_IN_DMA_DT_CUR 0x2c /* RO */ |
| #define ATI_REG_MODEM_IN_DMA_DT_SIZE 0x30 |
| #define ATI_REG_MODEM_OUT_FIFO 0x34 /* output threshold */ |
| #define ATI_REG_MODEM_OUT1_DMA_THRESHOLD_MASK (0xf<<16) |
| #define ATI_REG_MODEM_OUT1_DMA_THRESHOLD_SHIFT 16 |
| #define ATI_REG_MODEM_OUT_DMA1_LINKPTR 0x38 |
| #define ATI_REG_MODEM_OUT_DMA2_LINKPTR 0x3c |
| #define ATI_REG_MODEM_OUT_DMA3_LINKPTR 0x40 |
| #define ATI_REG_MODEM_OUT_DMA1_DT_START 0x44 |
| #define ATI_REG_MODEM_OUT_DMA1_DT_NEXT 0x48 |
| #define ATI_REG_MODEM_OUT_DMA1_DT_CUR 0x4c |
| #define ATI_REG_MODEM_OUT_DMA2_DT_START 0x50 |
| #define ATI_REG_MODEM_OUT_DMA2_DT_NEXT 0x54 |
| #define ATI_REG_MODEM_OUT_DMA2_DT_CUR 0x58 |
| #define ATI_REG_MODEM_OUT_DMA3_DT_START 0x5c |
| #define ATI_REG_MODEM_OUT_DMA3_DT_NEXT 0x60 |
| #define ATI_REG_MODEM_OUT_DMA3_DT_CUR 0x64 |
| #define ATI_REG_MODEM_OUT_DMA12_DT_SIZE 0x68 |
| #define ATI_REG_MODEM_OUT_DMA3_DT_SIZE 0x6c |
| #define ATI_REG_MODEM_OUT_FIFO_USED 0x70 |
| #define ATI_REG_MODEM_OUT_GPIO 0x74 |
| #define ATI_REG_MODEM_OUT_GPIO_EN 1 |
| #define ATI_REG_MODEM_OUT_GPIO_DATA_SHIFT 5 |
| #define ATI_REG_MODEM_IN_GPIO 0x78 |
| |
| #define ATI_REG_MODEM_MIRROR 0x7c |
| #define ATI_REG_AUDIO_MIRROR 0x80 |
| |
| #define ATI_REG_MODEM_FIFO_FLUSH 0x88 |
| #define ATI_REG_MODEM_FIFO_OUT1_FLUSH (1U<<0) |
| #define ATI_REG_MODEM_FIFO_OUT2_FLUSH (1U<<1) |
| #define ATI_REG_MODEM_FIFO_OUT3_FLUSH (1U<<2) |
| #define ATI_REG_MODEM_FIFO_IN_FLUSH (1U<<3) |
| |
| /* LINKPTR */ |
| #define ATI_REG_LINKPTR_EN (1U<<0) |
| |
| #define ATI_MAX_DESCRIPTORS 256 /* max number of descriptor packets */ |
| |
| |
| /* |
| */ |
| |
| typedef struct snd_atiixp atiixp_t; |
| typedef struct snd_atiixp_dma atiixp_dma_t; |
| typedef struct snd_atiixp_dma_ops atiixp_dma_ops_t; |
| |
| |
| /* |
| * DMA packate descriptor |
| */ |
| |
| typedef struct atiixp_dma_desc { |
| u32 addr; /* DMA buffer address */ |
| u16 status; /* status bits */ |
| u16 size; /* size of the packet in dwords */ |
| u32 next; /* address of the next packet descriptor */ |
| } atiixp_dma_desc_t; |
| |
| /* |
| * stream enum |
| */ |
| enum { ATI_DMA_PLAYBACK, ATI_DMA_CAPTURE, NUM_ATI_DMAS }; /* DMAs */ |
| enum { ATI_PCM_OUT, ATI_PCM_IN, NUM_ATI_PCMS }; /* AC97 pcm slots */ |
| enum { ATI_PCMDEV_ANALOG, NUM_ATI_PCMDEVS }; /* pcm devices */ |
| |
| #define NUM_ATI_CODECS 3 |
| |
| |
| /* |
| * constants and callbacks for each DMA type |
| */ |
| struct snd_atiixp_dma_ops { |
| int type; /* ATI_DMA_XXX */ |
| unsigned int llp_offset; /* LINKPTR offset */ |
| unsigned int dt_cur; /* DT_CUR offset */ |
| void (*enable_dma)(atiixp_t *chip, int on); /* called from open callback */ |
| void (*enable_transfer)(atiixp_t *chip, int on); /* called from trigger (START/STOP) */ |
| void (*flush_dma)(atiixp_t *chip); /* called from trigger (STOP only) */ |
| }; |
| |
| /* |
| * DMA stream |
| */ |
| struct snd_atiixp_dma { |
| const atiixp_dma_ops_t *ops; |
| struct snd_dma_buffer desc_buf; |
| snd_pcm_substream_t *substream; /* assigned PCM substream */ |
| unsigned int buf_addr, buf_bytes; /* DMA buffer address, bytes */ |
| unsigned int period_bytes, periods; |
| int opened; |
| int running; |
| int pcm_open_flag; |
| int ac97_pcm_type; /* index # of ac97_pcm to access, -1 = not used */ |
| }; |
| |
| /* |
| * ATI IXP chip |
| */ |
| struct snd_atiixp { |
| snd_card_t *card; |
| struct pci_dev *pci; |
| |
| struct resource *res; /* memory i/o */ |
| unsigned long addr; |
| void __iomem *remap_addr; |
| int irq; |
| |
| ac97_bus_t *ac97_bus; |
| ac97_t *ac97[NUM_ATI_CODECS]; |
| |
| spinlock_t reg_lock; |
| |
| atiixp_dma_t dmas[NUM_ATI_DMAS]; |
| struct ac97_pcm *pcms[NUM_ATI_PCMS]; |
| snd_pcm_t *pcmdevs[NUM_ATI_PCMDEVS]; |
| |
| int max_channels; /* max. channels for PCM out */ |
| |
| unsigned int codec_not_ready_bits; /* for codec detection */ |
| |
| int spdif_over_aclink; /* passed from the module option */ |
| struct semaphore open_mutex; /* playback open mutex */ |
| }; |
| |
| |
| /* |
| */ |
| static struct pci_device_id snd_atiixp_ids[] = { |
| { 0x1002, 0x434d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* SB200 */ |
| { 0x1002, 0x4378, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* SB400 */ |
| { 0, } |
| }; |
| |
| MODULE_DEVICE_TABLE(pci, snd_atiixp_ids); |
| |
| |
| /* |
| * lowlevel functions |
| */ |
| |
| /* |
| * update the bits of the given register. |
| * return 1 if the bits changed. |
| */ |
| static int snd_atiixp_update_bits(atiixp_t *chip, unsigned int reg, |
| unsigned int mask, unsigned int value) |
| { |
| void __iomem *addr = chip->remap_addr + reg; |
| unsigned int data, old_data; |
| old_data = data = readl(addr); |
| data &= ~mask; |
| data |= value; |
| if (old_data == data) |
| return 0; |
| writel(data, addr); |
| return 1; |
| } |
| |
| /* |
| * macros for easy use |
| */ |
| #define atiixp_write(chip,reg,value) \ |
| writel(value, chip->remap_addr + ATI_REG_##reg) |
| #define atiixp_read(chip,reg) \ |
| readl(chip->remap_addr + ATI_REG_##reg) |
| #define atiixp_update(chip,reg,mask,val) \ |
| snd_atiixp_update_bits(chip, ATI_REG_##reg, mask, val) |
| |
| /* |
| * handling DMA packets |
| * |
| * we allocate a linear buffer for the DMA, and split it to each packet. |
| * in a future version, a scatter-gather buffer should be implemented. |
| */ |
| |
| #define ATI_DESC_LIST_SIZE \ |
| PAGE_ALIGN(ATI_MAX_DESCRIPTORS * sizeof(atiixp_dma_desc_t)) |
| |
| /* |
| * build packets ring for the given buffer size. |
| * |
| * IXP handles the buffer descriptors, which are connected as a linked |
| * list. although we can change the list dynamically, in this version, |
| * a static RING of buffer descriptors is used. |
| * |
| * the ring is built in this function, and is set up to the hardware. |
| */ |
| static int atiixp_build_dma_packets(atiixp_t *chip, atiixp_dma_t *dma, |
| snd_pcm_substream_t *substream, |
| unsigned int periods, |
| unsigned int period_bytes) |
| { |
| unsigned int i; |
| u32 addr, desc_addr; |
| unsigned long flags; |
| |
| if (periods > ATI_MAX_DESCRIPTORS) |
| return -ENOMEM; |
| |
| if (dma->desc_buf.area == NULL) { |
| if (snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, snd_dma_pci_data(chip->pci), |
| ATI_DESC_LIST_SIZE, &dma->desc_buf) < 0) |
| return -ENOMEM; |
| dma->period_bytes = dma->periods = 0; /* clear */ |
| } |
| |
| if (dma->periods == periods && dma->period_bytes == period_bytes) |
| return 0; |
| |
| /* reset DMA before changing the descriptor table */ |
| spin_lock_irqsave(&chip->reg_lock, flags); |
| writel(0, chip->remap_addr + dma->ops->llp_offset); |
| dma->ops->enable_dma(chip, 0); |
| dma->ops->enable_dma(chip, 1); |
| spin_unlock_irqrestore(&chip->reg_lock, flags); |
| |
| /* fill the entries */ |
| addr = (u32)substream->runtime->dma_addr; |
| desc_addr = (u32)dma->desc_buf.addr; |
| for (i = 0; i < periods; i++) { |
| atiixp_dma_desc_t *desc = &((atiixp_dma_desc_t *)dma->desc_buf.area)[i]; |
| desc->addr = cpu_to_le32(addr); |
| desc->status = 0; |
| desc->size = period_bytes >> 2; /* in dwords */ |
| desc_addr += sizeof(atiixp_dma_desc_t); |
| if (i == periods - 1) |
| desc->next = cpu_to_le32((u32)dma->desc_buf.addr); |
| else |
| desc->next = cpu_to_le32(desc_addr); |
| addr += period_bytes; |
| } |
| |
| writel((u32)dma->desc_buf.addr | ATI_REG_LINKPTR_EN, |
| chip->remap_addr + dma->ops->llp_offset); |
| |
| dma->period_bytes = period_bytes; |
| dma->periods = periods; |
| |
| return 0; |
| } |
| |
| /* |
| * remove the ring buffer and release it if assigned |
| */ |
| static void atiixp_clear_dma_packets(atiixp_t *chip, atiixp_dma_t *dma, snd_pcm_substream_t *substream) |
| { |
| if (dma->desc_buf.area) { |
| writel(0, chip->remap_addr + dma->ops->llp_offset); |
| snd_dma_free_pages(&dma->desc_buf); |
| dma->desc_buf.area = NULL; |
| } |
| } |
| |
| /* |
| * AC97 interface |
| */ |
| static int snd_atiixp_acquire_codec(atiixp_t *chip) |
| { |
| int timeout = 1000; |
| |
| while (atiixp_read(chip, PHYS_OUT_ADDR) & ATI_REG_PHYS_OUT_ADDR_EN) { |
| if (! timeout--) { |
| snd_printk(KERN_WARNING "atiixp-modem: codec acquire timeout\n"); |
| return -EBUSY; |
| } |
| udelay(1); |
| } |
| return 0; |
| } |
| |
| static unsigned short snd_atiixp_codec_read(atiixp_t *chip, unsigned short codec, unsigned short reg) |
| { |
| unsigned int data; |
| int timeout; |
| |
| if (snd_atiixp_acquire_codec(chip) < 0) |
| return 0xffff; |
| data = (reg << ATI_REG_PHYS_OUT_ADDR_SHIFT) | |
| ATI_REG_PHYS_OUT_ADDR_EN | |
| ATI_REG_PHYS_OUT_RW | |
| codec; |
| atiixp_write(chip, PHYS_OUT_ADDR, data); |
| if (snd_atiixp_acquire_codec(chip) < 0) |
| return 0xffff; |
| timeout = 1000; |
| do { |
| data = atiixp_read(chip, PHYS_IN_ADDR); |
| if (data & ATI_REG_PHYS_IN_READ_FLAG) |
| return data >> ATI_REG_PHYS_IN_DATA_SHIFT; |
| udelay(1); |
| } while (--timeout); |
| /* time out may happen during reset */ |
| if (reg < 0x7c) |
| snd_printk(KERN_WARNING "atiixp-modem: codec read timeout (reg %x)\n", reg); |
| return 0xffff; |
| } |
| |
| |
| static void snd_atiixp_codec_write(atiixp_t *chip, unsigned short codec, unsigned short reg, unsigned short val) |
| { |
| unsigned int data; |
| |
| if (snd_atiixp_acquire_codec(chip) < 0) |
| return; |
| data = ((unsigned int)val << ATI_REG_PHYS_OUT_DATA_SHIFT) | |
| ((unsigned int)reg << ATI_REG_PHYS_OUT_ADDR_SHIFT) | |
| ATI_REG_PHYS_OUT_ADDR_EN | codec; |
| atiixp_write(chip, PHYS_OUT_ADDR, data); |
| } |
| |
| |
| static unsigned short snd_atiixp_ac97_read(ac97_t *ac97, unsigned short reg) |
| { |
| atiixp_t *chip = ac97->private_data; |
| return snd_atiixp_codec_read(chip, ac97->num, reg); |
| |
| } |
| |
| static void snd_atiixp_ac97_write(ac97_t *ac97, unsigned short reg, unsigned short val) |
| { |
| atiixp_t *chip = ac97->private_data; |
| if (reg == AC97_GPIO_STATUS) { |
| atiixp_write(chip, MODEM_OUT_GPIO, |
| (val << ATI_REG_MODEM_OUT_GPIO_DATA_SHIFT) | ATI_REG_MODEM_OUT_GPIO_EN); |
| return; |
| } |
| snd_atiixp_codec_write(chip, ac97->num, reg, val); |
| } |
| |
| /* |
| * reset AC link |
| */ |
| static int snd_atiixp_aclink_reset(atiixp_t *chip) |
| { |
| int timeout; |
| |
| /* reset powerdoewn */ |
| if (atiixp_update(chip, CMD, ATI_REG_CMD_POWERDOWN, 0)) |
| udelay(10); |
| |
| /* perform a software reset */ |
| atiixp_update(chip, CMD, ATI_REG_CMD_AC_SOFT_RESET, ATI_REG_CMD_AC_SOFT_RESET); |
| atiixp_read(chip, CMD); |
| udelay(10); |
| atiixp_update(chip, CMD, ATI_REG_CMD_AC_SOFT_RESET, 0); |
| |
| timeout = 10; |
| while (! (atiixp_read(chip, CMD) & ATI_REG_CMD_ACLINK_ACTIVE)) { |
| /* do a hard reset */ |
| atiixp_update(chip, CMD, ATI_REG_CMD_AC_SYNC|ATI_REG_CMD_AC_RESET, |
| ATI_REG_CMD_AC_SYNC); |
| atiixp_read(chip, CMD); |
| msleep(1); |
| atiixp_update(chip, CMD, ATI_REG_CMD_AC_RESET, ATI_REG_CMD_AC_RESET); |
| if (--timeout) { |
| snd_printk(KERN_ERR "atiixp-modem: codec reset timeout\n"); |
| break; |
| } |
| } |
| |
| /* deassert RESET and assert SYNC to make sure */ |
| atiixp_update(chip, CMD, ATI_REG_CMD_AC_SYNC|ATI_REG_CMD_AC_RESET, |
| ATI_REG_CMD_AC_SYNC|ATI_REG_CMD_AC_RESET); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM |
| static int snd_atiixp_aclink_down(atiixp_t *chip) |
| { |
| // if (atiixp_read(chip, MODEM_MIRROR) & 0x1) /* modem running, too? */ |
| // return -EBUSY; |
| atiixp_update(chip, CMD, |
| ATI_REG_CMD_POWERDOWN | ATI_REG_CMD_AC_RESET, |
| ATI_REG_CMD_POWERDOWN); |
| return 0; |
| } |
| #endif |
| |
| /* |
| * auto-detection of codecs |
| * |
| * the IXP chip can generate interrupts for the non-existing codecs. |
| * NEW_FRAME interrupt is used to make sure that the interrupt is generated |
| * even if all three codecs are connected. |
| */ |
| |
| #define ALL_CODEC_NOT_READY \ |
| (ATI_REG_ISR_CODEC0_NOT_READY |\ |
| ATI_REG_ISR_CODEC1_NOT_READY |\ |
| ATI_REG_ISR_CODEC2_NOT_READY) |
| #define CODEC_CHECK_BITS (ALL_CODEC_NOT_READY|ATI_REG_ISR_NEW_FRAME) |
| |
| static int snd_atiixp_codec_detect(atiixp_t *chip) |
| { |
| int timeout; |
| |
| chip->codec_not_ready_bits = 0; |
| atiixp_write(chip, IER, CODEC_CHECK_BITS); |
| /* wait for the interrupts */ |
| timeout = 50; |
| while (timeout-- > 0) { |
| msleep(1); |
| if (chip->codec_not_ready_bits) |
| break; |
| } |
| atiixp_write(chip, IER, 0); /* disable irqs */ |
| |
| if ((chip->codec_not_ready_bits & ALL_CODEC_NOT_READY) == ALL_CODEC_NOT_READY) { |
| snd_printk(KERN_ERR "atiixp-modem: no codec detected!\n"); |
| return -ENXIO; |
| } |
| return 0; |
| } |
| |
| |
| /* |
| * enable DMA and irqs |
| */ |
| static int snd_atiixp_chip_start(atiixp_t *chip) |
| { |
| unsigned int reg; |
| |
| /* set up spdif, enable burst mode */ |
| reg = atiixp_read(chip, CMD); |
| reg |= ATI_REG_CMD_BURST_EN; |
| if(!(reg & ATI_REG_CMD_MODEM_PRESENT)) |
| reg |= ATI_REG_CMD_MODEM_PRESENT; |
| atiixp_write(chip, CMD, reg); |
| |
| /* clear all interrupt source */ |
| atiixp_write(chip, ISR, 0xffffffff); |
| /* enable irqs */ |
| atiixp_write(chip, IER, |
| ATI_REG_IER_MODEM_STATUS_EN | |
| ATI_REG_IER_MODEM_IN_XRUN_EN | |
| ATI_REG_IER_MODEM_OUT1_XRUN_EN); |
| return 0; |
| } |
| |
| |
| /* |
| * disable DMA and IRQs |
| */ |
| static int snd_atiixp_chip_stop(atiixp_t *chip) |
| { |
| /* clear interrupt source */ |
| atiixp_write(chip, ISR, atiixp_read(chip, ISR)); |
| /* disable irqs */ |
| atiixp_write(chip, IER, 0); |
| return 0; |
| } |
| |
| |
| /* |
| * PCM section |
| */ |
| |
| /* |
| * pointer callback simplly reads XXX_DMA_DT_CUR register as the current |
| * position. when SG-buffer is implemented, the offset must be calculated |
| * correctly... |
| */ |
| static snd_pcm_uframes_t snd_atiixp_pcm_pointer(snd_pcm_substream_t *substream) |
| { |
| atiixp_t *chip = snd_pcm_substream_chip(substream); |
| snd_pcm_runtime_t *runtime = substream->runtime; |
| atiixp_dma_t *dma = (atiixp_dma_t *)runtime->private_data; |
| unsigned int curptr; |
| int timeout = 1000; |
| |
| while (timeout--) { |
| curptr = readl(chip->remap_addr + dma->ops->dt_cur); |
| if (curptr < dma->buf_addr) |
| continue; |
| curptr -= dma->buf_addr; |
| if (curptr >= dma->buf_bytes) |
| continue; |
| return bytes_to_frames(runtime, curptr); |
| } |
| snd_printd("atiixp-modem: invalid DMA pointer read 0x%x (buf=%x)\n", |
| readl(chip->remap_addr + dma->ops->dt_cur), dma->buf_addr); |
| return 0; |
| } |
| |
| /* |
| * XRUN detected, and stop the PCM substream |
| */ |
| static void snd_atiixp_xrun_dma(atiixp_t *chip, atiixp_dma_t *dma) |
| { |
| if (! dma->substream || ! dma->running) |
| return; |
| snd_printdd("atiixp-modem: XRUN detected (DMA %d)\n", dma->ops->type); |
| snd_pcm_stop(dma->substream, SNDRV_PCM_STATE_XRUN); |
| } |
| |
| /* |
| * the period ack. update the substream. |
| */ |
| static void snd_atiixp_update_dma(atiixp_t *chip, atiixp_dma_t *dma) |
| { |
| if (! dma->substream || ! dma->running) |
| return; |
| snd_pcm_period_elapsed(dma->substream); |
| } |
| |
| /* set BUS_BUSY interrupt bit if any DMA is running */ |
| /* call with spinlock held */ |
| static void snd_atiixp_check_bus_busy(atiixp_t *chip) |
| { |
| unsigned int bus_busy; |
| if (atiixp_read(chip, CMD) & (ATI_REG_CMD_MODEM_SEND1_EN | |
| ATI_REG_CMD_MODEM_RECEIVE_EN)) |
| bus_busy = ATI_REG_IER_MODEM_SET_BUS_BUSY; |
| else |
| bus_busy = 0; |
| atiixp_update(chip, IER, ATI_REG_IER_MODEM_SET_BUS_BUSY, bus_busy); |
| } |
| |
| /* common trigger callback |
| * calling the lowlevel callbacks in it |
| */ |
| static int snd_atiixp_pcm_trigger(snd_pcm_substream_t *substream, int cmd) |
| { |
| atiixp_t *chip = snd_pcm_substream_chip(substream); |
| atiixp_dma_t *dma = (atiixp_dma_t *)substream->runtime->private_data; |
| int err = 0; |
| |
| snd_assert(dma->ops->enable_transfer && dma->ops->flush_dma, return -EINVAL); |
| |
| spin_lock(&chip->reg_lock); |
| switch(cmd) { |
| case SNDRV_PCM_TRIGGER_START: |
| dma->ops->enable_transfer(chip, 1); |
| dma->running = 1; |
| break; |
| case SNDRV_PCM_TRIGGER_STOP: |
| dma->ops->enable_transfer(chip, 0); |
| dma->running = 0; |
| break; |
| default: |
| err = -EINVAL; |
| break; |
| } |
| if (! err) { |
| snd_atiixp_check_bus_busy(chip); |
| if (cmd == SNDRV_PCM_TRIGGER_STOP) { |
| dma->ops->flush_dma(chip); |
| snd_atiixp_check_bus_busy(chip); |
| } |
| } |
| spin_unlock(&chip->reg_lock); |
| return err; |
| } |
| |
| |
| /* |
| * lowlevel callbacks for each DMA type |
| * |
| * every callback is supposed to be called in chip->reg_lock spinlock |
| */ |
| |
| /* flush FIFO of analog OUT DMA */ |
| static void atiixp_out_flush_dma(atiixp_t *chip) |
| { |
| atiixp_write(chip, MODEM_FIFO_FLUSH, ATI_REG_MODEM_FIFO_OUT1_FLUSH); |
| } |
| |
| /* enable/disable analog OUT DMA */ |
| static void atiixp_out_enable_dma(atiixp_t *chip, int on) |
| { |
| unsigned int data; |
| data = atiixp_read(chip, CMD); |
| if (on) { |
| if (data & ATI_REG_CMD_MODEM_OUT_DMA1_EN) |
| return; |
| atiixp_out_flush_dma(chip); |
| data |= ATI_REG_CMD_MODEM_OUT_DMA1_EN; |
| } else |
| data &= ~ATI_REG_CMD_MODEM_OUT_DMA1_EN; |
| atiixp_write(chip, CMD, data); |
| } |
| |
| /* start/stop transfer over OUT DMA */ |
| static void atiixp_out_enable_transfer(atiixp_t *chip, int on) |
| { |
| atiixp_update(chip, CMD, ATI_REG_CMD_MODEM_SEND1_EN, |
| on ? ATI_REG_CMD_MODEM_SEND1_EN : 0); |
| } |
| |
| /* enable/disable analog IN DMA */ |
| static void atiixp_in_enable_dma(atiixp_t *chip, int on) |
| { |
| atiixp_update(chip, CMD, ATI_REG_CMD_MODEM_IN_DMA_EN, |
| on ? ATI_REG_CMD_MODEM_IN_DMA_EN : 0); |
| } |
| |
| /* start/stop analog IN DMA */ |
| static void atiixp_in_enable_transfer(atiixp_t *chip, int on) |
| { |
| if (on) { |
| unsigned int data = atiixp_read(chip, CMD); |
| if (! (data & ATI_REG_CMD_MODEM_RECEIVE_EN)) { |
| data |= ATI_REG_CMD_MODEM_RECEIVE_EN; |
| atiixp_write(chip, CMD, data); |
| } |
| } else |
| atiixp_update(chip, CMD, ATI_REG_CMD_MODEM_RECEIVE_EN, 0); |
| } |
| |
| /* flush FIFO of analog IN DMA */ |
| static void atiixp_in_flush_dma(atiixp_t *chip) |
| { |
| atiixp_write(chip, MODEM_FIFO_FLUSH, ATI_REG_MODEM_FIFO_IN_FLUSH); |
| } |
| |
| /* set up slots and formats for analog OUT */ |
| static int snd_atiixp_playback_prepare(snd_pcm_substream_t *substream) |
| { |
| atiixp_t *chip = snd_pcm_substream_chip(substream); |
| unsigned int data; |
| |
| spin_lock_irq(&chip->reg_lock); |
| /* set output threshold */ |
| data = atiixp_read(chip, MODEM_OUT_FIFO); |
| data &= ~ATI_REG_MODEM_OUT1_DMA_THRESHOLD_MASK; |
| data |= 0x04 << ATI_REG_MODEM_OUT1_DMA_THRESHOLD_SHIFT; |
| atiixp_write(chip, MODEM_OUT_FIFO, data); |
| spin_unlock_irq(&chip->reg_lock); |
| return 0; |
| } |
| |
| /* set up slots and formats for analog IN */ |
| static int snd_atiixp_capture_prepare(snd_pcm_substream_t *substream) |
| { |
| return 0; |
| } |
| |
| /* |
| * hw_params - allocate the buffer and set up buffer descriptors |
| */ |
| static int snd_atiixp_pcm_hw_params(snd_pcm_substream_t *substream, |
| snd_pcm_hw_params_t *hw_params) |
| { |
| atiixp_t *chip = snd_pcm_substream_chip(substream); |
| atiixp_dma_t *dma = (atiixp_dma_t *)substream->runtime->private_data; |
| int err; |
| int i; |
| |
| err = snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(hw_params)); |
| if (err < 0) |
| return err; |
| dma->buf_addr = substream->runtime->dma_addr; |
| dma->buf_bytes = params_buffer_bytes(hw_params); |
| |
| err = atiixp_build_dma_packets(chip, dma, substream, |
| params_periods(hw_params), |
| params_period_bytes(hw_params)); |
| if (err < 0) |
| return err; |
| |
| /* set up modem rate */ |
| for (i = 0; i < NUM_ATI_CODECS; i++) { |
| if (! chip->ac97[i]) |
| continue; |
| snd_ac97_write(chip->ac97[i], AC97_LINE1_RATE, params_rate(hw_params)); |
| snd_ac97_write(chip->ac97[i], AC97_LINE1_LEVEL, 0); |
| } |
| |
| return err; |
| } |
| |
| static int snd_atiixp_pcm_hw_free(snd_pcm_substream_t * substream) |
| { |
| atiixp_t *chip = snd_pcm_substream_chip(substream); |
| atiixp_dma_t *dma = (atiixp_dma_t *)substream->runtime->private_data; |
| |
| atiixp_clear_dma_packets(chip, dma, substream); |
| snd_pcm_lib_free_pages(substream); |
| return 0; |
| } |
| |
| |
| /* |
| * pcm hardware definition, identical for all DMA types |
| */ |
| static snd_pcm_hardware_t snd_atiixp_pcm_hw = |
| { |
| .info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED | |
| SNDRV_PCM_INFO_BLOCK_TRANSFER | |
| SNDRV_PCM_INFO_MMAP_VALID), |
| .formats = SNDRV_PCM_FMTBIT_S16_LE, |
| .rates = SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_KNOT, |
| .rate_min = 8000, |
| .rate_max = 16000, |
| .channels_min = 2, |
| .channels_max = 2, |
| .buffer_bytes_max = 256 * 1024, |
| .period_bytes_min = 32, |
| .period_bytes_max = 128 * 1024, |
| .periods_min = 2, |
| .periods_max = ATI_MAX_DESCRIPTORS, |
| }; |
| |
| static int snd_atiixp_pcm_open(snd_pcm_substream_t *substream, atiixp_dma_t *dma, int pcm_type) |
| { |
| atiixp_t *chip = snd_pcm_substream_chip(substream); |
| snd_pcm_runtime_t *runtime = substream->runtime; |
| int err; |
| static unsigned int rates[] = { 8000, 9600, 12000, 16000 }; |
| static snd_pcm_hw_constraint_list_t hw_constraints_rates = { |
| .count = ARRAY_SIZE(rates), |
| .list = rates, |
| .mask = 0, |
| }; |
| |
| snd_assert(dma->ops && dma->ops->enable_dma, return -EINVAL); |
| |
| if (dma->opened) |
| return -EBUSY; |
| dma->substream = substream; |
| runtime->hw = snd_atiixp_pcm_hw; |
| dma->ac97_pcm_type = pcm_type; |
| if ((err = snd_pcm_hw_constraint_list(runtime, 0, SNDRV_PCM_HW_PARAM_RATE, &hw_constraints_rates)) < 0) |
| return err; |
| if ((err = snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS)) < 0) |
| return err; |
| runtime->private_data = dma; |
| |
| /* enable DMA bits */ |
| spin_lock_irq(&chip->reg_lock); |
| dma->ops->enable_dma(chip, 1); |
| spin_unlock_irq(&chip->reg_lock); |
| dma->opened = 1; |
| |
| return 0; |
| } |
| |
| static int snd_atiixp_pcm_close(snd_pcm_substream_t *substream, atiixp_dma_t *dma) |
| { |
| atiixp_t *chip = snd_pcm_substream_chip(substream); |
| /* disable DMA bits */ |
| snd_assert(dma->ops && dma->ops->enable_dma, return -EINVAL); |
| spin_lock_irq(&chip->reg_lock); |
| dma->ops->enable_dma(chip, 0); |
| spin_unlock_irq(&chip->reg_lock); |
| dma->substream = NULL; |
| dma->opened = 0; |
| return 0; |
| } |
| |
| /* |
| */ |
| static int snd_atiixp_playback_open(snd_pcm_substream_t *substream) |
| { |
| atiixp_t *chip = snd_pcm_substream_chip(substream); |
| int err; |
| |
| down(&chip->open_mutex); |
| err = snd_atiixp_pcm_open(substream, &chip->dmas[ATI_DMA_PLAYBACK], 0); |
| up(&chip->open_mutex); |
| if (err < 0) |
| return err; |
| return 0; |
| } |
| |
| static int snd_atiixp_playback_close(snd_pcm_substream_t *substream) |
| { |
| atiixp_t *chip = snd_pcm_substream_chip(substream); |
| int err; |
| down(&chip->open_mutex); |
| err = snd_atiixp_pcm_close(substream, &chip->dmas[ATI_DMA_PLAYBACK]); |
| up(&chip->open_mutex); |
| return err; |
| } |
| |
| static int snd_atiixp_capture_open(snd_pcm_substream_t *substream) |
| { |
| atiixp_t *chip = snd_pcm_substream_chip(substream); |
| return snd_atiixp_pcm_open(substream, &chip->dmas[ATI_DMA_CAPTURE], 1); |
| } |
| |
| static int snd_atiixp_capture_close(snd_pcm_substream_t *substream) |
| { |
| atiixp_t *chip = snd_pcm_substream_chip(substream); |
| return snd_atiixp_pcm_close(substream, &chip->dmas[ATI_DMA_CAPTURE]); |
| } |
| |
| |
| /* AC97 playback */ |
| static snd_pcm_ops_t snd_atiixp_playback_ops = { |
| .open = snd_atiixp_playback_open, |
| .close = snd_atiixp_playback_close, |
| .ioctl = snd_pcm_lib_ioctl, |
| .hw_params = snd_atiixp_pcm_hw_params, |
| .hw_free = snd_atiixp_pcm_hw_free, |
| .prepare = snd_atiixp_playback_prepare, |
| .trigger = snd_atiixp_pcm_trigger, |
| .pointer = snd_atiixp_pcm_pointer, |
| }; |
| |
| /* AC97 capture */ |
| static snd_pcm_ops_t snd_atiixp_capture_ops = { |
| .open = snd_atiixp_capture_open, |
| .close = snd_atiixp_capture_close, |
| .ioctl = snd_pcm_lib_ioctl, |
| .hw_params = snd_atiixp_pcm_hw_params, |
| .hw_free = snd_atiixp_pcm_hw_free, |
| .prepare = snd_atiixp_capture_prepare, |
| .trigger = snd_atiixp_pcm_trigger, |
| .pointer = snd_atiixp_pcm_pointer, |
| }; |
| |
| static atiixp_dma_ops_t snd_atiixp_playback_dma_ops = { |
| .type = ATI_DMA_PLAYBACK, |
| .llp_offset = ATI_REG_MODEM_OUT_DMA1_LINKPTR, |
| .dt_cur = ATI_REG_MODEM_OUT_DMA1_DT_CUR, |
| .enable_dma = atiixp_out_enable_dma, |
| .enable_transfer = atiixp_out_enable_transfer, |
| .flush_dma = atiixp_out_flush_dma, |
| }; |
| |
| static atiixp_dma_ops_t snd_atiixp_capture_dma_ops = { |
| .type = ATI_DMA_CAPTURE, |
| .llp_offset = ATI_REG_MODEM_IN_DMA_LINKPTR, |
| .dt_cur = ATI_REG_MODEM_IN_DMA_DT_CUR, |
| .enable_dma = atiixp_in_enable_dma, |
| .enable_transfer = atiixp_in_enable_transfer, |
| .flush_dma = atiixp_in_flush_dma, |
| }; |
| |
| static int __devinit snd_atiixp_pcm_new(atiixp_t *chip) |
| { |
| snd_pcm_t *pcm; |
| int err; |
| |
| /* initialize constants */ |
| chip->dmas[ATI_DMA_PLAYBACK].ops = &snd_atiixp_playback_dma_ops; |
| chip->dmas[ATI_DMA_CAPTURE].ops = &snd_atiixp_capture_dma_ops; |
| |
| /* PCM #0: analog I/O */ |
| err = snd_pcm_new(chip->card, "ATI IXP MC97", ATI_PCMDEV_ANALOG, 1, 1, &pcm); |
| if (err < 0) |
| return err; |
| snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &snd_atiixp_playback_ops); |
| snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &snd_atiixp_capture_ops); |
| pcm->dev_class = SNDRV_PCM_CLASS_MODEM; |
| pcm->private_data = chip; |
| strcpy(pcm->name, "ATI IXP MC97"); |
| chip->pcmdevs[ATI_PCMDEV_ANALOG] = pcm; |
| |
| snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV, |
| snd_dma_pci_data(chip->pci), 64*1024, 128*1024); |
| |
| return 0; |
| } |
| |
| |
| |
| /* |
| * interrupt handler |
| */ |
| static irqreturn_t snd_atiixp_interrupt(int irq, void *dev_id, struct pt_regs *regs) |
| { |
| atiixp_t *chip = dev_id; |
| unsigned int status; |
| |
| status = atiixp_read(chip, ISR); |
| |
| if (! status) |
| return IRQ_NONE; |
| |
| /* process audio DMA */ |
| if (status & ATI_REG_ISR_MODEM_OUT1_XRUN) |
| snd_atiixp_xrun_dma(chip, &chip->dmas[ATI_DMA_PLAYBACK]); |
| else if (status & ATI_REG_ISR_MODEM_OUT1_STATUS) |
| snd_atiixp_update_dma(chip, &chip->dmas[ATI_DMA_PLAYBACK]); |
| if (status & ATI_REG_ISR_MODEM_IN_XRUN) |
| snd_atiixp_xrun_dma(chip, &chip->dmas[ATI_DMA_CAPTURE]); |
| else if (status & ATI_REG_ISR_MODEM_IN_STATUS) |
| snd_atiixp_update_dma(chip, &chip->dmas[ATI_DMA_CAPTURE]); |
| |
| /* for codec detection */ |
| if (status & CODEC_CHECK_BITS) { |
| unsigned int detected; |
| detected = status & CODEC_CHECK_BITS; |
| spin_lock(&chip->reg_lock); |
| chip->codec_not_ready_bits |= detected; |
| atiixp_update(chip, IER, detected, 0); /* disable the detected irqs */ |
| spin_unlock(&chip->reg_lock); |
| } |
| |
| /* ack */ |
| atiixp_write(chip, ISR, status); |
| |
| return IRQ_HANDLED; |
| } |
| |
| |
| /* |
| * ac97 mixer section |
| */ |
| |
| static int __devinit snd_atiixp_mixer_new(atiixp_t *chip, int clock) |
| { |
| ac97_bus_t *pbus; |
| ac97_template_t ac97; |
| int i, err; |
| int codec_count; |
| static ac97_bus_ops_t ops = { |
| .write = snd_atiixp_ac97_write, |
| .read = snd_atiixp_ac97_read, |
| }; |
| static unsigned int codec_skip[NUM_ATI_CODECS] = { |
| ATI_REG_ISR_CODEC0_NOT_READY, |
| ATI_REG_ISR_CODEC1_NOT_READY, |
| ATI_REG_ISR_CODEC2_NOT_READY, |
| }; |
| |
| if (snd_atiixp_codec_detect(chip) < 0) |
| return -ENXIO; |
| |
| if ((err = snd_ac97_bus(chip->card, 0, &ops, chip, &pbus)) < 0) |
| return err; |
| pbus->clock = clock; |
| chip->ac97_bus = pbus; |
| |
| codec_count = 0; |
| for (i = 0; i < NUM_ATI_CODECS; i++) { |
| if (chip->codec_not_ready_bits & codec_skip[i]) |
| continue; |
| memset(&ac97, 0, sizeof(ac97)); |
| ac97.private_data = chip; |
| ac97.pci = chip->pci; |
| ac97.num = i; |
| ac97.scaps = AC97_SCAP_SKIP_AUDIO; |
| if ((err = snd_ac97_mixer(pbus, &ac97, &chip->ac97[i])) < 0) { |
| chip->ac97[i] = NULL; /* to be sure */ |
| snd_printdd("atiixp-modem: codec %d not available for modem\n", i); |
| continue; |
| } |
| codec_count++; |
| } |
| |
| if (! codec_count) { |
| snd_printk(KERN_ERR "atiixp-modem: no codec available\n"); |
| return -ENODEV; |
| } |
| |
| /* snd_ac97_tune_hardware(chip->ac97, ac97_quirks); */ |
| |
| return 0; |
| } |
| |
| |
| #ifdef CONFIG_PM |
| /* |
| * power management |
| */ |
| static int snd_atiixp_suspend(snd_card_t *card, pm_message_t state) |
| { |
| atiixp_t *chip = card->pm_private_data; |
| int i; |
| |
| for (i = 0; i < NUM_ATI_PCMDEVS; i++) |
| if (chip->pcmdevs[i]) |
| snd_pcm_suspend_all(chip->pcmdevs[i]); |
| for (i = 0; i < NUM_ATI_CODECS; i++) |
| if (chip->ac97[i]) |
| snd_ac97_suspend(chip->ac97[i]); |
| snd_atiixp_aclink_down(chip); |
| snd_atiixp_chip_stop(chip); |
| |
| pci_set_power_state(chip->pci, PCI_D3hot); |
| pci_disable_device(chip->pci); |
| return 0; |
| } |
| |
| static int snd_atiixp_resume(snd_card_t *card) |
| { |
| atiixp_t *chip = card->pm_private_data; |
| int i; |
| |
| pci_enable_device(chip->pci); |
| pci_set_power_state(chip->pci, PCI_D0); |
| pci_set_master(chip->pci); |
| |
| snd_atiixp_aclink_reset(chip); |
| snd_atiixp_chip_start(chip); |
| |
| for (i = 0; i < NUM_ATI_CODECS; i++) |
| if (chip->ac97[i]) |
| snd_ac97_resume(chip->ac97[i]); |
| |
| return 0; |
| } |
| #endif /* CONFIG_PM */ |
| |
| |
| /* |
| * proc interface for register dump |
| */ |
| |
| static void snd_atiixp_proc_read(snd_info_entry_t *entry, snd_info_buffer_t *buffer) |
| { |
| atiixp_t *chip = entry->private_data; |
| int i; |
| |
| for (i = 0; i < 256; i += 4) |
| snd_iprintf(buffer, "%02x: %08x\n", i, readl(chip->remap_addr + i)); |
| } |
| |
| static void __devinit snd_atiixp_proc_init(atiixp_t *chip) |
| { |
| snd_info_entry_t *entry; |
| |
| if (! snd_card_proc_new(chip->card, "atiixp-modem", &entry)) |
| snd_info_set_text_ops(entry, chip, 1024, snd_atiixp_proc_read); |
| } |
| |
| |
| |
| /* |
| * destructor |
| */ |
| |
| static int snd_atiixp_free(atiixp_t *chip) |
| { |
| if (chip->irq < 0) |
| goto __hw_end; |
| snd_atiixp_chip_stop(chip); |
| synchronize_irq(chip->irq); |
| __hw_end: |
| if (chip->irq >= 0) |
| free_irq(chip->irq, (void *)chip); |
| if (chip->remap_addr) |
| iounmap(chip->remap_addr); |
| pci_release_regions(chip->pci); |
| pci_disable_device(chip->pci); |
| kfree(chip); |
| return 0; |
| } |
| |
| static int snd_atiixp_dev_free(snd_device_t *device) |
| { |
| atiixp_t *chip = device->device_data; |
| return snd_atiixp_free(chip); |
| } |
| |
| /* |
| * constructor for chip instance |
| */ |
| static int __devinit snd_atiixp_create(snd_card_t *card, |
| struct pci_dev *pci, |
| atiixp_t **r_chip) |
| { |
| static snd_device_ops_t ops = { |
| .dev_free = snd_atiixp_dev_free, |
| }; |
| atiixp_t *chip; |
| int err; |
| |
| if ((err = pci_enable_device(pci)) < 0) |
| return err; |
| |
| chip = kzalloc(sizeof(*chip), GFP_KERNEL); |
| if (chip == NULL) { |
| pci_disable_device(pci); |
| return -ENOMEM; |
| } |
| |
| spin_lock_init(&chip->reg_lock); |
| init_MUTEX(&chip->open_mutex); |
| chip->card = card; |
| chip->pci = pci; |
| chip->irq = -1; |
| if ((err = pci_request_regions(pci, "ATI IXP MC97")) < 0) { |
| kfree(chip); |
| pci_disable_device(pci); |
| return err; |
| } |
| chip->addr = pci_resource_start(pci, 0); |
| chip->remap_addr = ioremap_nocache(chip->addr, pci_resource_len(pci, 0)); |
| if (chip->remap_addr == NULL) { |
| snd_printk(KERN_ERR "AC'97 space ioremap problem\n"); |
| snd_atiixp_free(chip); |
| return -EIO; |
| } |
| |
| if (request_irq(pci->irq, snd_atiixp_interrupt, SA_INTERRUPT|SA_SHIRQ, card->shortname, (void *)chip)) { |
| snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq); |
| snd_atiixp_free(chip); |
| return -EBUSY; |
| } |
| chip->irq = pci->irq; |
| pci_set_master(pci); |
| synchronize_irq(chip->irq); |
| |
| if ((err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops)) < 0) { |
| snd_atiixp_free(chip); |
| return err; |
| } |
| |
| snd_card_set_dev(card, &pci->dev); |
| |
| *r_chip = chip; |
| return 0; |
| } |
| |
| |
| static int __devinit snd_atiixp_probe(struct pci_dev *pci, |
| const struct pci_device_id *pci_id) |
| { |
| snd_card_t *card; |
| atiixp_t *chip; |
| unsigned char revision; |
| int err; |
| |
| card = snd_card_new(index, id, THIS_MODULE, 0); |
| if (card == NULL) |
| return -ENOMEM; |
| |
| pci_read_config_byte(pci, PCI_REVISION_ID, &revision); |
| |
| strcpy(card->driver, "ATIIXP-MODEM"); |
| strcpy(card->shortname, "ATI IXP Modem"); |
| if ((err = snd_atiixp_create(card, pci, &chip)) < 0) |
| goto __error; |
| |
| if ((err = snd_atiixp_aclink_reset(chip)) < 0) |
| goto __error; |
| |
| if ((err = snd_atiixp_mixer_new(chip, ac97_clock)) < 0) |
| goto __error; |
| |
| if ((err = snd_atiixp_pcm_new(chip)) < 0) |
| goto __error; |
| |
| snd_atiixp_proc_init(chip); |
| |
| snd_atiixp_chip_start(chip); |
| |
| sprintf(card->longname, "%s rev %x at 0x%lx, irq %i", |
| card->shortname, revision, chip->addr, chip->irq); |
| |
| snd_card_set_pm_callback(card, snd_atiixp_suspend, snd_atiixp_resume, chip); |
| |
| if ((err = snd_card_register(card)) < 0) |
| goto __error; |
| |
| pci_set_drvdata(pci, card); |
| return 0; |
| |
| __error: |
| snd_card_free(card); |
| return err; |
| } |
| |
| static void __devexit snd_atiixp_remove(struct pci_dev *pci) |
| { |
| snd_card_free(pci_get_drvdata(pci)); |
| pci_set_drvdata(pci, NULL); |
| } |
| |
| static struct pci_driver driver = { |
| .name = "ATI IXP MC97 controller", |
| .id_table = snd_atiixp_ids, |
| .probe = snd_atiixp_probe, |
| .remove = __devexit_p(snd_atiixp_remove), |
| SND_PCI_PM_CALLBACKS |
| }; |
| |
| |
| static int __init alsa_card_atiixp_init(void) |
| { |
| return pci_register_driver(&driver); |
| } |
| |
| static void __exit alsa_card_atiixp_exit(void) |
| { |
| pci_unregister_driver(&driver); |
| } |
| |
| module_init(alsa_card_atiixp_init) |
| module_exit(alsa_card_atiixp_exit) |