igc: Add HW initialization code
Add code for hardware initialization and reset
Add code for semaphore handling
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
diff --git a/drivers/net/ethernet/intel/igc/igc_base.c b/drivers/net/ethernet/intel/igc/igc_base.c
index 3425b74..4efb474 100644
--- a/drivers/net/ethernet/intel/igc/igc_base.c
+++ b/drivers/net/ethernet/intel/igc/igc_base.c
@@ -5,6 +5,184 @@
#include "igc_hw.h"
#include "igc_i225.h"
+#include "igc_mac.h"
+#include "igc_base.h"
+#include "igc.h"
+
+/**
+ * igc_set_pcie_completion_timeout - set pci-e completion timeout
+ * @hw: pointer to the HW structure
+ */
+static s32 igc_set_pcie_completion_timeout(struct igc_hw *hw)
+{
+ u32 gcr = rd32(IGC_GCR);
+ u16 pcie_devctl2;
+ s32 ret_val = 0;
+
+ /* only take action if timeout value is defaulted to 0 */
+ if (gcr & IGC_GCR_CMPL_TMOUT_MASK)
+ goto out;
+
+ /* if capabilities version is type 1 we can write the
+ * timeout of 10ms to 200ms through the GCR register
+ */
+ if (!(gcr & IGC_GCR_CAP_VER2)) {
+ gcr |= IGC_GCR_CMPL_TMOUT_10ms;
+ goto out;
+ }
+
+ /* for version 2 capabilities we need to write the config space
+ * directly in order to set the completion timeout value for
+ * 16ms to 55ms
+ */
+ ret_val = igc_read_pcie_cap_reg(hw, PCIE_DEVICE_CONTROL2,
+ &pcie_devctl2);
+ if (ret_val)
+ goto out;
+
+ pcie_devctl2 |= PCIE_DEVICE_CONTROL2_16ms;
+
+ ret_val = igc_write_pcie_cap_reg(hw, PCIE_DEVICE_CONTROL2,
+ &pcie_devctl2);
+out:
+ /* disable completion timeout resend */
+ gcr &= ~IGC_GCR_CMPL_TMOUT_RESEND;
+
+ wr32(IGC_GCR, gcr);
+
+ return ret_val;
+}
+
+/**
+ * igc_reset_hw_base - Reset hardware
+ * @hw: pointer to the HW structure
+ *
+ * This resets the hardware into a known state. This is a
+ * function pointer entry point called by the api module.
+ */
+static s32 igc_reset_hw_base(struct igc_hw *hw)
+{
+ s32 ret_val;
+ u32 ctrl;
+
+ /* Prevent the PCI-E bus from sticking if there is no TLP connection
+ * on the last TLP read/write transaction when MAC is reset.
+ */
+ ret_val = igc_disable_pcie_master(hw);
+ if (ret_val)
+ hw_dbg("PCI-E Master disable polling has failed.\n");
+
+ /* set the completion timeout for interface */
+ ret_val = igc_set_pcie_completion_timeout(hw);
+ if (ret_val)
+ hw_dbg("PCI-E Set completion timeout has failed.\n");
+
+ hw_dbg("Masking off all interrupts\n");
+ wr32(IGC_IMC, 0xffffffff);
+
+ wr32(IGC_RCTL, 0);
+ wr32(IGC_TCTL, IGC_TCTL_PSP);
+ wrfl();
+
+ usleep_range(10000, 20000);
+
+ ctrl = rd32(IGC_CTRL);
+
+ hw_dbg("Issuing a global reset to MAC\n");
+ wr32(IGC_CTRL, ctrl | IGC_CTRL_RST);
+
+ ret_val = igc_get_auto_rd_done(hw);
+ if (ret_val) {
+ /* When auto config read does not complete, do not
+ * return with an error. This can happen in situations
+ * where there is no eeprom and prevents getting link.
+ */
+ hw_dbg("Auto Read Done did not complete\n");
+ }
+
+ /* Clear any pending interrupt events. */
+ wr32(IGC_IMC, 0xffffffff);
+ rd32(IGC_ICR);
+
+ return ret_val;
+}
+
+/**
+ * igc_init_mac_params_base - Init MAC func ptrs.
+ * @hw: pointer to the HW structure
+ */
+static s32 igc_init_mac_params_base(struct igc_hw *hw)
+{
+ struct igc_mac_info *mac = &hw->mac;
+
+ /* Set mta register count */
+ mac->mta_reg_count = 128;
+ mac->rar_entry_count = IGC_RAR_ENTRIES;
+
+ /* reset */
+ mac->ops.reset_hw = igc_reset_hw_base;
+
+ mac->ops.acquire_swfw_sync = igc_acquire_swfw_sync_i225;
+ mac->ops.release_swfw_sync = igc_release_swfw_sync_i225;
+
+ return 0;
+}
+
+static s32 igc_get_invariants_base(struct igc_hw *hw)
+{
+ u32 link_mode = 0;
+ u32 ctrl_ext = 0;
+ s32 ret_val = 0;
+
+ ctrl_ext = rd32(IGC_CTRL_EXT);
+ link_mode = ctrl_ext & IGC_CTRL_EXT_LINK_MODE_MASK;
+
+ /* mac initialization and operations */
+ ret_val = igc_init_mac_params_base(hw);
+ if (ret_val)
+ goto out;
+
+out:
+ return ret_val;
+}
+
+/**
+ * igc_init_hw_base - Initialize hardware
+ * @hw: pointer to the HW structure
+ *
+ * This inits the hardware readying it for operation.
+ */
+static s32 igc_init_hw_base(struct igc_hw *hw)
+{
+ struct igc_mac_info *mac = &hw->mac;
+ u16 i, rar_count = mac->rar_entry_count;
+ s32 ret_val = 0;
+
+ /* Setup the receive address */
+ igc_init_rx_addrs(hw, rar_count);
+
+ /* Zero out the Multicast HASH table */
+ hw_dbg("Zeroing the MTA\n");
+ for (i = 0; i < mac->mta_reg_count; i++)
+ array_wr32(IGC_MTA, i, 0);
+
+ /* Zero out the Unicast HASH table */
+ hw_dbg("Zeroing the UTA\n");
+ for (i = 0; i < mac->uta_reg_count; i++)
+ array_wr32(IGC_UTA, i, 0);
+
+ /* Setup link and flow control */
+ ret_val = igc_setup_link(hw);
+
+ /* Clear all of the statistics registers (clear on read). It is
+ * important that we do this after we have tried to establish link
+ * because the symbol error count will increment wildly if there
+ * is no link.
+ */
+ igc_clear_hw_cntrs_base(hw);
+
+ return ret_val;
+}
/**
* igc_rx_fifo_flush_base - Clean rx fifo after Rx enable
@@ -81,3 +259,12 @@ void igc_rx_fifo_flush_base(struct igc_hw *hw)
rd32(IGC_RNBC);
rd32(IGC_MPC);
}
+
+static struct igc_mac_operations igc_mac_ops_base = {
+ .init_hw = igc_init_hw_base,
+};
+
+const struct igc_info igc_base_info = {
+ .get_invariants = igc_get_invariants_base,
+ .mac_ops = &igc_mac_ops_base,
+};