MIPS: Netlogic: PIC freq calculation for XLP 9XX/2XX
Update PIC frequency calculation for XLP9XX and 2XX processors using
the correct PLL registers. This should work for all possible board
configurations.
Signed-off-by: Ganesan Ramalingam <ganesanr@broadcom.com>
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/6876/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
diff --git a/arch/mips/include/asm/netlogic/xlp-hal/sys.h b/arch/mips/include/asm/netlogic/xlp-hal/sys.h
index d9b107f..bcb136d 100644
--- a/arch/mips/include/asm/netlogic/xlp-hal/sys.h
+++ b/arch/mips/include/asm/netlogic/xlp-hal/sys.h
@@ -147,6 +147,28 @@
#define SYS_SYS_PLL_MEM_REQ 0x2a3
#define SYS_PLL_MEM_STAT 0x2a4
+/* PLL registers XLP9XX */
+#define SYS_9XX_DMC_PLL_CTRL0 0x140
+#define SYS_9XX_DMC_PLL_CTRL1 0x141
+#define SYS_9XX_DMC_PLL_CTRL2 0x142
+#define SYS_9XX_DMC_PLL_CTRL3 0x143
+#define SYS_9XX_PLL_CTRL0 0x144
+#define SYS_9XX_PLL_CTRL1 0x145
+#define SYS_9XX_PLL_CTRL2 0x146
+#define SYS_9XX_PLL_CTRL3 0x147
+
+#define SYS_9XX_PLL_CTRL0_DEVX(x) (0x148 + (x) * 4)
+#define SYS_9XX_PLL_CTRL1_DEVX(x) (0x149 + (x) * 4)
+#define SYS_9XX_PLL_CTRL2_DEVX(x) (0x14a + (x) * 4)
+#define SYS_9XX_PLL_CTRL3_DEVX(x) (0x14b + (x) * 4)
+
+#define SYS_9XX_CPU_PLL_CHG_CTRL 0x188
+#define SYS_9XX_PLL_CHG_CTRL 0x189
+#define SYS_9XX_CLK_DEV_DIS 0x18a
+#define SYS_9XX_CLK_DEV_SEL 0x18b
+#define SYS_9XX_CLK_DEV_DIV 0x18d
+#define SYS_9XX_CLK_DEV_CHG 0x18f
+
/* Registers changed on 9XX */
#define SYS_9XX_POWER_ON_RESET_CFG 0x00
#define SYS_9XX_CHIP_RESET 0x01
@@ -170,6 +192,11 @@
#define nlm_get_fuse_regbase(node) \
(nlm_get_fuse_pcibase(node) + XLP_IO_PCI_HDRSZ)
+#define nlm_get_clock_pcibase(node) \
+ nlm_pcicfg_base(XLP9XX_IO_CLOCK_OFFSET(node))
+#define nlm_get_clock_regbase(node) \
+ (nlm_get_clock_pcibase(node) + XLP_IO_PCI_HDRSZ)
+
unsigned int nlm_get_pic_frequency(int node);
#endif
#endif