iwlagn: move PCI-E transport files
Move all the PCI-E specific transport files to
be iwl-trans-pcie*; specifically iwl-trans.c
which is really iwl-trans-pcie.c.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c b/drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c
new file mode 100644
index 0000000..458a6fb
--- /dev/null
+++ b/drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c
@@ -0,0 +1,1424 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved.
+ *
+ * Portions of this file are derived from the ipw3945 project, as well
+ * as portions of the ieee80211 subsystem header files.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ *****************************************************************************/
+#include <linux/sched.h>
+#include <linux/wait.h>
+#include <linux/gfp.h>
+
+/*TODO: Remove include to iwl-core.h*/
+#include "iwl-core.h"
+#include "iwl-io.h"
+#include "iwl-helpers.h"
+#include "iwl-trans-pcie-int.h"
+
+/******************************************************************************
+ *
+ * RX path functions
+ *
+ ******************************************************************************/
+
+/*
+ * Rx theory of operation
+ *
+ * Driver allocates a circular buffer of Receive Buffer Descriptors (RBDs),
+ * each of which point to Receive Buffers to be filled by the NIC. These get
+ * used not only for Rx frames, but for any command response or notification
+ * from the NIC. The driver and NIC manage the Rx buffers by means
+ * of indexes into the circular buffer.
+ *
+ * Rx Queue Indexes
+ * The host/firmware share two index registers for managing the Rx buffers.
+ *
+ * The READ index maps to the first position that the firmware may be writing
+ * to -- the driver can read up to (but not including) this position and get
+ * good data.
+ * The READ index is managed by the firmware once the card is enabled.
+ *
+ * The WRITE index maps to the last position the driver has read from -- the
+ * position preceding WRITE is the last slot the firmware can place a packet.
+ *
+ * The queue is empty (no good data) if WRITE = READ - 1, and is full if
+ * WRITE = READ.
+ *
+ * During initialization, the host sets up the READ queue position to the first
+ * INDEX position, and WRITE to the last (READ - 1 wrapped)
+ *
+ * When the firmware places a packet in a buffer, it will advance the READ index
+ * and fire the RX interrupt. The driver can then query the READ index and
+ * process as many packets as possible, moving the WRITE index forward as it
+ * resets the Rx queue buffers with new memory.
+ *
+ * The management in the driver is as follows:
+ * + A list of pre-allocated SKBs is stored in iwl->rxq->rx_free. When
+ * iwl->rxq->free_count drops to or below RX_LOW_WATERMARK, work is scheduled
+ * to replenish the iwl->rxq->rx_free.
+ * + In iwl_rx_replenish (scheduled) if 'processed' != 'read' then the
+ * iwl->rxq is replenished and the READ INDEX is updated (updating the
+ * 'processed' and 'read' driver indexes as well)
+ * + A received packet is processed and handed to the kernel network stack,
+ * detached from the iwl->rxq. The driver 'processed' index is updated.
+ * + The Host/Firmware iwl->rxq is replenished at tasklet time from the rx_free
+ * list. If there are no allocated buffers in iwl->rxq->rx_free, the READ
+ * INDEX is not incremented and iwl->status(RX_STALLED) is set. If there
+ * were enough free buffers and RX_STALLED is set it is cleared.
+ *
+ *
+ * Driver sequence:
+ *
+ * iwl_rx_queue_alloc() Allocates rx_free
+ * iwl_rx_replenish() Replenishes rx_free list from rx_used, and calls
+ * iwl_rx_queue_restock
+ * iwl_rx_queue_restock() Moves available buffers from rx_free into Rx
+ * queue, updates firmware pointers, and updates
+ * the WRITE index. If insufficient rx_free buffers
+ * are available, schedules iwl_rx_replenish
+ *
+ * -- enable interrupts --
+ * ISR - iwl_rx() Detach iwl_rx_mem_buffers from pool up to the
+ * READ INDEX, detaching the SKB from the pool.
+ * Moves the packet buffer from queue to rx_used.
+ * Calls iwl_rx_queue_restock to refill any empty
+ * slots.
+ * ...
+ *
+ */
+
+/**
+ * iwl_rx_queue_space - Return number of free slots available in queue.
+ */
+static int iwl_rx_queue_space(const struct iwl_rx_queue *q)
+{
+ int s = q->read - q->write;
+ if (s <= 0)
+ s += RX_QUEUE_SIZE;
+ /* keep some buffer to not confuse full and empty queue */
+ s -= 2;
+ if (s < 0)
+ s = 0;
+ return s;
+}
+
+/**
+ * iwl_rx_queue_update_write_ptr - Update the write pointer for the RX queue
+ */
+void iwl_rx_queue_update_write_ptr(struct iwl_trans *trans,
+ struct iwl_rx_queue *q)
+{
+ unsigned long flags;
+ u32 reg;
+
+ spin_lock_irqsave(&q->lock, flags);
+
+ if (q->need_update == 0)
+ goto exit_unlock;
+
+ if (hw_params(trans).shadow_reg_enable) {
+ /* shadow register enabled */
+ /* Device expects a multiple of 8 */
+ q->write_actual = (q->write & ~0x7);
+ iwl_write32(bus(trans), FH_RSCSR_CHNL0_WPTR, q->write_actual);
+ } else {
+ /* If power-saving is in use, make sure device is awake */
+ if (test_bit(STATUS_POWER_PMI, &trans->shrd->status)) {
+ reg = iwl_read32(bus(trans), CSR_UCODE_DRV_GP1);
+
+ if (reg & CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP) {
+ IWL_DEBUG_INFO(trans,
+ "Rx queue requesting wakeup,"
+ " GP1 = 0x%x\n", reg);
+ iwl_set_bit(bus(trans), CSR_GP_CNTRL,
+ CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
+ goto exit_unlock;
+ }
+
+ q->write_actual = (q->write & ~0x7);
+ iwl_write_direct32(bus(trans), FH_RSCSR_CHNL0_WPTR,
+ q->write_actual);
+
+ /* Else device is assumed to be awake */
+ } else {
+ /* Device expects a multiple of 8 */
+ q->write_actual = (q->write & ~0x7);
+ iwl_write_direct32(bus(trans), FH_RSCSR_CHNL0_WPTR,
+ q->write_actual);
+ }
+ }
+ q->need_update = 0;
+
+ exit_unlock:
+ spin_unlock_irqrestore(&q->lock, flags);
+}
+
+/**
+ * iwlagn_dma_addr2rbd_ptr - convert a DMA address to a uCode read buffer ptr
+ */
+static inline __le32 iwlagn_dma_addr2rbd_ptr(dma_addr_t dma_addr)
+{
+ return cpu_to_le32((u32)(dma_addr >> 8));
+}
+
+/**
+ * iwlagn_rx_queue_restock - refill RX queue from pre-allocated pool
+ *
+ * If there are slots in the RX queue that need to be restocked,
+ * and we have free pre-allocated buffers, fill the ranks as much
+ * as we can, pulling from rx_free.
+ *
+ * This moves the 'write' index forward to catch up with 'processed', and
+ * also updates the memory address in the firmware to reference the new
+ * target buffer.
+ */
+static void iwlagn_rx_queue_restock(struct iwl_trans *trans)
+{
+ struct iwl_trans_pcie *trans_pcie =
+ IWL_TRANS_GET_PCIE_TRANS(trans);
+
+ struct iwl_rx_queue *rxq = &trans_pcie->rxq;
+ struct list_head *element;
+ struct iwl_rx_mem_buffer *rxb;
+ unsigned long flags;
+
+ spin_lock_irqsave(&rxq->lock, flags);
+ while ((iwl_rx_queue_space(rxq) > 0) && (rxq->free_count)) {
+ /* The overwritten rxb must be a used one */
+ rxb = rxq->queue[rxq->write];
+ BUG_ON(rxb && rxb->page);
+
+ /* Get next free Rx buffer, remove from free list */
+ element = rxq->rx_free.next;
+ rxb = list_entry(element, struct iwl_rx_mem_buffer, list);
+ list_del(element);
+
+ /* Point to Rx buffer via next RBD in circular buffer */
+ rxq->bd[rxq->write] = iwlagn_dma_addr2rbd_ptr(rxb->page_dma);
+ rxq->queue[rxq->write] = rxb;
+ rxq->write = (rxq->write + 1) & RX_QUEUE_MASK;
+ rxq->free_count--;
+ }
+ spin_unlock_irqrestore(&rxq->lock, flags);
+ /* If the pre-allocated buffer pool is dropping low, schedule to
+ * refill it */
+ if (rxq->free_count <= RX_LOW_WATERMARK)
+ queue_work(trans->shrd->workqueue, &trans_pcie->rx_replenish);
+
+
+ /* If we've added more space for the firmware to place data, tell it.
+ * Increment device's write pointer in multiples of 8. */
+ if (rxq->write_actual != (rxq->write & ~0x7)) {
+ spin_lock_irqsave(&rxq->lock, flags);
+ rxq->need_update = 1;
+ spin_unlock_irqrestore(&rxq->lock, flags);
+ iwl_rx_queue_update_write_ptr(trans, rxq);
+ }
+}
+
+/**
+ * iwlagn_rx_replenish - Move all used packet from rx_used to rx_free
+ *
+ * When moving to rx_free an SKB is allocated for the slot.
+ *
+ * Also restock the Rx queue via iwl_rx_queue_restock.
+ * This is called as a scheduled work item (except for during initialization)
+ */
+static void iwlagn_rx_allocate(struct iwl_trans *trans, gfp_t priority)
+{
+ struct iwl_trans_pcie *trans_pcie =
+ IWL_TRANS_GET_PCIE_TRANS(trans);
+
+ struct iwl_rx_queue *rxq = &trans_pcie->rxq;
+ struct list_head *element;
+ struct iwl_rx_mem_buffer *rxb;
+ struct page *page;
+ unsigned long flags;
+ gfp_t gfp_mask = priority;
+
+ while (1) {
+ spin_lock_irqsave(&rxq->lock, flags);
+ if (list_empty(&rxq->rx_used)) {
+ spin_unlock_irqrestore(&rxq->lock, flags);
+ return;
+ }
+ spin_unlock_irqrestore(&rxq->lock, flags);
+
+ if (rxq->free_count > RX_LOW_WATERMARK)
+ gfp_mask |= __GFP_NOWARN;
+
+ if (hw_params(trans).rx_page_order > 0)
+ gfp_mask |= __GFP_COMP;
+
+ /* Alloc a new receive buffer */
+ page = alloc_pages(gfp_mask,
+ hw_params(trans).rx_page_order);
+ if (!page) {
+ if (net_ratelimit())
+ IWL_DEBUG_INFO(trans, "alloc_pages failed, "
+ "order: %d\n",
+ hw_params(trans).rx_page_order);
+
+ if ((rxq->free_count <= RX_LOW_WATERMARK) &&
+ net_ratelimit())
+ IWL_CRIT(trans, "Failed to alloc_pages with %s."
+ "Only %u free buffers remaining.\n",
+ priority == GFP_ATOMIC ?
+ "GFP_ATOMIC" : "GFP_KERNEL",
+ rxq->free_count);
+ /* We don't reschedule replenish work here -- we will
+ * call the restock method and if it still needs
+ * more buffers it will schedule replenish */
+ return;
+ }
+
+ spin_lock_irqsave(&rxq->lock, flags);
+
+ if (list_empty(&rxq->rx_used)) {
+ spin_unlock_irqrestore(&rxq->lock, flags);
+ __free_pages(page, hw_params(trans).rx_page_order);
+ return;
+ }
+ element = rxq->rx_used.next;
+ rxb = list_entry(element, struct iwl_rx_mem_buffer, list);
+ list_del(element);
+
+ spin_unlock_irqrestore(&rxq->lock, flags);
+
+ BUG_ON(rxb->page);
+ rxb->page = page;
+ /* Get physical address of the RB */
+ rxb->page_dma = dma_map_page(bus(trans)->dev, page, 0,
+ PAGE_SIZE << hw_params(trans).rx_page_order,
+ DMA_FROM_DEVICE);
+ /* dma address must be no more than 36 bits */
+ BUG_ON(rxb->page_dma & ~DMA_BIT_MASK(36));
+ /* and also 256 byte aligned! */
+ BUG_ON(rxb->page_dma & DMA_BIT_MASK(8));
+
+ spin_lock_irqsave(&rxq->lock, flags);
+
+ list_add_tail(&rxb->list, &rxq->rx_free);
+ rxq->free_count++;
+
+ spin_unlock_irqrestore(&rxq->lock, flags);
+ }
+}
+
+void iwlagn_rx_replenish(struct iwl_trans *trans)
+{
+ unsigned long flags;
+
+ iwlagn_rx_allocate(trans, GFP_KERNEL);
+
+ spin_lock_irqsave(&trans->shrd->lock, flags);
+ iwlagn_rx_queue_restock(trans);
+ spin_unlock_irqrestore(&trans->shrd->lock, flags);
+}
+
+static void iwlagn_rx_replenish_now(struct iwl_trans *trans)
+{
+ iwlagn_rx_allocate(trans, GFP_ATOMIC);
+
+ iwlagn_rx_queue_restock(trans);
+}
+
+void iwl_bg_rx_replenish(struct work_struct *data)
+{
+ struct iwl_trans_pcie *trans_pcie =
+ container_of(data, struct iwl_trans_pcie, rx_replenish);
+ struct iwl_trans *trans = trans_pcie->trans;
+
+ if (test_bit(STATUS_EXIT_PENDING, &trans->shrd->status))
+ return;
+
+ mutex_lock(&trans->shrd->mutex);
+ iwlagn_rx_replenish(trans);
+ mutex_unlock(&trans->shrd->mutex);
+}
+
+/**
+ * iwl_rx_handle - Main entry function for receiving responses from uCode
+ *
+ * Uses the priv->rx_handlers callback function array to invoke
+ * the appropriate handlers, including command responses,
+ * frame-received notifications, and other notifications.
+ */
+static void iwl_rx_handle(struct iwl_trans *trans)
+{
+ struct iwl_rx_mem_buffer *rxb;
+ struct iwl_rx_packet *pkt;
+ struct iwl_trans_pcie *trans_pcie =
+ IWL_TRANS_GET_PCIE_TRANS(trans);
+ struct iwl_rx_queue *rxq = &trans_pcie->rxq;
+ u32 r, i;
+ int reclaim;
+ unsigned long flags;
+ u8 fill_rx = 0;
+ u32 count = 8;
+ int total_empty;
+
+ /* uCode's read index (stored in shared DRAM) indicates the last Rx
+ * buffer that the driver may process (last buffer filled by ucode). */
+ r = le16_to_cpu(rxq->rb_stts->closed_rb_num) & 0x0FFF;
+ i = rxq->read;
+
+ /* Rx interrupt, but nothing sent from uCode */
+ if (i == r)
+ IWL_DEBUG_RX(trans, "r = %d, i = %d\n", r, i);
+
+ /* calculate total frames need to be restock after handling RX */
+ total_empty = r - rxq->write_actual;
+ if (total_empty < 0)
+ total_empty += RX_QUEUE_SIZE;
+
+ if (total_empty > (RX_QUEUE_SIZE / 2))
+ fill_rx = 1;
+
+ while (i != r) {
+ int len;
+ u16 txq_id, sequence;
+
+ rxb = rxq->queue[i];
+
+ /* If an RXB doesn't have a Rx queue slot associated with it,
+ * then a bug has been introduced in the queue refilling
+ * routines -- catch it here */
+ if (WARN_ON(rxb == NULL)) {
+ i = (i + 1) & RX_QUEUE_MASK;
+ continue;
+ }
+
+ rxq->queue[i] = NULL;
+
+ dma_unmap_page(bus(trans)->dev, rxb->page_dma,
+ PAGE_SIZE << hw_params(trans).rx_page_order,
+ DMA_FROM_DEVICE);
+ pkt = rxb_addr(rxb);
+
+ IWL_DEBUG_RX(trans, "r = %d, i = %d, %s, 0x%02x\n", r,
+ i, get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd);
+
+ len = le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK;
+ len += sizeof(u32); /* account for status word */
+ trace_iwlwifi_dev_rx(priv(trans), pkt, len);
+
+ /* Reclaim a command buffer only if this packet is a response
+ * to a (driver-originated) command.
+ * If the packet (e.g. Rx frame) originated from uCode,
+ * there is no command buffer to reclaim.
+ * Ucode should set SEQ_RX_FRAME bit if ucode-originated,
+ * but apparently a few don't get set; catch them here. */
+ reclaim = !(pkt->hdr.sequence & SEQ_RX_FRAME) &&
+ (pkt->hdr.cmd != REPLY_RX_PHY_CMD) &&
+ (pkt->hdr.cmd != REPLY_RX) &&
+ (pkt->hdr.cmd != REPLY_RX_MPDU_CMD) &&
+ (pkt->hdr.cmd != REPLY_COMPRESSED_BA) &&
+ (pkt->hdr.cmd != STATISTICS_NOTIFICATION) &&
+ (pkt->hdr.cmd != REPLY_TX);
+
+ sequence = le16_to_cpu(pkt->hdr.sequence);
+ txq_id = SEQ_TO_QUEUE(le16_to_cpu(pkt->hdr.sequence));
+
+ /* warn if this is cmd response / notification and the uCode
+ * didn't set the SEQ_RX_FRAME for a frame that is
+ * uCode-originated*/
+ WARN(txq_id == trans->shrd->cmd_queue && reclaim == false &&
+ (!(pkt->hdr.sequence & SEQ_RX_FRAME)),
+ "reclaim is false, SEQ_RX_FRAME unset: %s\n",
+ get_cmd_string(pkt->hdr.cmd));
+
+ iwl_rx_dispatch(priv(trans), rxb);
+
+ /*
+ * XXX: After here, we should always check rxb->page
+ * against NULL before touching it or its virtual
+ * memory (pkt). Because some rx_handler might have
+ * already taken or freed the pages.
+ */
+
+ if (reclaim) {
+ /* Invoke any callbacks, transfer the buffer to caller,
+ * and fire off the (possibly) blocking
+ * iwl_trans_send_cmd()
+ * as we reclaim the driver command queue */
+ if (rxb->page)
+ iwl_tx_cmd_complete(trans, rxb);
+ else
+ IWL_WARN(trans, "Claim null rxb?\n");
+ }
+
+ /* Reuse the page if possible. For notification packets and
+ * SKBs that fail to Rx correctly, add them back into the
+ * rx_free list for reuse later. */
+ spin_lock_irqsave(&rxq->lock, flags);
+ if (rxb->page != NULL) {
+ rxb->page_dma = dma_map_page(bus(trans)->dev, rxb->page,
+ 0, PAGE_SIZE <<
+ hw_params(trans).rx_page_order,
+ DMA_FROM_DEVICE);
+ list_add_tail(&rxb->list, &rxq->rx_free);
+ rxq->free_count++;
+ } else
+ list_add_tail(&rxb->list, &rxq->rx_used);
+
+ spin_unlock_irqrestore(&rxq->lock, flags);
+
+ i = (i + 1) & RX_QUEUE_MASK;
+ /* If there are a lot of unused frames,
+ * restock the Rx queue so ucode wont assert. */
+ if (fill_rx) {
+ count++;
+ if (count >= 8) {
+ rxq->read = i;
+ iwlagn_rx_replenish_now(trans);
+ count = 0;
+ }
+ }
+ }
+
+ /* Backtrack one entry */
+ rxq->read = i;
+ if (fill_rx)
+ iwlagn_rx_replenish_now(trans);
+ else
+ iwlagn_rx_queue_restock(trans);
+}
+
+static const char * const desc_lookup_text[] = {
+ "OK",
+ "FAIL",
+ "BAD_PARAM",
+ "BAD_CHECKSUM",
+ "NMI_INTERRUPT_WDG",
+ "SYSASSERT",
+ "FATAL_ERROR",
+ "BAD_COMMAND",
+ "HW_ERROR_TUNE_LOCK",
+ "HW_ERROR_TEMPERATURE",
+ "ILLEGAL_CHAN_FREQ",
+ "VCC_NOT_STABLE",
+ "FH_ERROR",
+ "NMI_INTERRUPT_HOST",
+ "NMI_INTERRUPT_ACTION_PT",
+ "NMI_INTERRUPT_UNKNOWN",
+ "UCODE_VERSION_MISMATCH",
+ "HW_ERROR_ABS_LOCK",
+ "HW_ERROR_CAL_LOCK_FAIL",
+ "NMI_INTERRUPT_INST_ACTION_PT",
+ "NMI_INTERRUPT_DATA_ACTION_PT",
+ "NMI_TRM_HW_ER",
+ "NMI_INTERRUPT_TRM",
+ "NMI_INTERRUPT_BREAK_POINT",
+ "DEBUG_0",
+ "DEBUG_1",
+ "DEBUG_2",
+ "DEBUG_3",
+};
+
+static struct { char *name; u8 num; } advanced_lookup[] = {
+ { "NMI_INTERRUPT_WDG", 0x34 },
+ { "SYSASSERT", 0x35 },
+ { "UCODE_VERSION_MISMATCH", 0x37 },
+ { "BAD_COMMAND", 0x38 },
+ { "NMI_INTERRUPT_DATA_ACTION_PT", 0x3C },
+ { "FATAL_ERROR", 0x3D },
+ { "NMI_TRM_HW_ERR", 0x46 },
+ { "NMI_INTERRUPT_TRM", 0x4C },
+ { "NMI_INTERRUPT_BREAK_POINT", 0x54 },
+ { "NMI_INTERRUPT_WDG_RXF_FULL", 0x5C },
+ { "NMI_INTERRUPT_WDG_NO_RBD_RXF_FULL", 0x64 },
+ { "NMI_INTERRUPT_HOST", 0x66 },
+ { "NMI_INTERRUPT_ACTION_PT", 0x7C },
+ { "NMI_INTERRUPT_UNKNOWN", 0x84 },
+ { "NMI_INTERRUPT_INST_ACTION_PT", 0x86 },
+ { "ADVANCED_SYSASSERT", 0 },
+};
+
+static const char *desc_lookup(u32 num)
+{
+ int i;
+ int max = ARRAY_SIZE(desc_lookup_text);
+
+ if (num < max)
+ return desc_lookup_text[num];
+
+ max = ARRAY_SIZE(advanced_lookup) - 1;
+ for (i = 0; i < max; i++) {
+ if (advanced_lookup[i].num == num)
+ break;
+ }
+ return advanced_lookup[i].name;
+}
+
+#define ERROR_START_OFFSET (1 * sizeof(u32))
+#define ERROR_ELEM_SIZE (7 * sizeof(u32))
+
+static void iwl_dump_nic_error_log(struct iwl_trans *trans)
+{
+ u32 base;
+ struct iwl_error_event_table table;
+ struct iwl_priv *priv = priv(trans);
+ struct iwl_trans_pcie *trans_pcie =
+ IWL_TRANS_GET_PCIE_TRANS(trans);
+
+ base = priv->device_pointers.error_event_table;
+ if (priv->ucode_type == IWL_UCODE_INIT) {
+ if (!base)
+ base = priv->init_errlog_ptr;
+ } else {
+ if (!base)
+ base = priv->inst_errlog_ptr;
+ }
+
+ if (!iwlagn_hw_valid_rtc_data_addr(base)) {
+ IWL_ERR(trans,
+ "Not valid error log pointer 0x%08X for %s uCode\n",
+ base,
+ (priv->ucode_type == IWL_UCODE_INIT)
+ ? "Init" : "RT");
+ return;
+ }
+
+ iwl_read_targ_mem_words(bus(priv), base, &table, sizeof(table));
+
+ if (ERROR_START_OFFSET <= table.valid * ERROR_ELEM_SIZE) {
+ IWL_ERR(trans, "Start IWL Error Log Dump:\n");
+ IWL_ERR(trans, "Status: 0x%08lX, count: %d\n",
+ trans->shrd->status, table.valid);
+ }
+
+ trans_pcie->isr_stats.err_code = table.error_id;
+
+ trace_iwlwifi_dev_ucode_error(priv, table.error_id, table.tsf_low,
+ table.data1, table.data2, table.line,
+ table.blink1, table.blink2, table.ilink1,
+ table.ilink2, table.bcon_time, table.gp1,
+ table.gp2, table.gp3, table.ucode_ver,
+ table.hw_ver, table.brd_ver);
+ IWL_ERR(trans, "0x%08X | %-28s\n", table.error_id,
+ desc_lookup(table.error_id));
+ IWL_ERR(trans, "0x%08X | uPc\n", table.pc);
+ IWL_ERR(trans, "0x%08X | branchlink1\n", table.blink1);
+ IWL_ERR(trans, "0x%08X | branchlink2\n", table.blink2);
+ IWL_ERR(trans, "0x%08X | interruptlink1\n", table.ilink1);
+ IWL_ERR(trans, "0x%08X | interruptlink2\n", table.ilink2);
+ IWL_ERR(trans, "0x%08X | data1\n", table.data1);
+ IWL_ERR(trans, "0x%08X | data2\n", table.data2);
+ IWL_ERR(trans, "0x%08X | line\n", table.line);
+ IWL_ERR(trans, "0x%08X | beacon time\n", table.bcon_time);
+ IWL_ERR(trans, "0x%08X | tsf low\n", table.tsf_low);
+ IWL_ERR(trans, "0x%08X | tsf hi\n", table.tsf_hi);
+ IWL_ERR(trans, "0x%08X | time gp1\n", table.gp1);
+ IWL_ERR(trans, "0x%08X | time gp2\n", table.gp2);
+ IWL_ERR(trans, "0x%08X | time gp3\n", table.gp3);
+ IWL_ERR(trans, "0x%08X | uCode version\n", table.ucode_ver);
+ IWL_ERR(trans, "0x%08X | hw version\n", table.hw_ver);
+ IWL_ERR(trans, "0x%08X | board version\n", table.brd_ver);
+ IWL_ERR(trans, "0x%08X | hcmd\n", table.hcmd);
+}
+
+/**
+ * iwl_irq_handle_error - called for HW or SW error interrupt from card
+ */
+static void iwl_irq_handle_error(struct iwl_trans *trans)
+{
+ struct iwl_priv *priv = priv(trans);
+ /* W/A for WiFi/WiMAX coex and WiMAX own the RF */
+ if (priv->cfg->internal_wimax_coex &&
+ (!(iwl_read_prph(bus(trans), APMG_CLK_CTRL_REG) &
+ APMS_CLK_VAL_MRB_FUNC_MODE) ||
+ (iwl_read_prph(bus(trans), APMG_PS_CTRL_REG) &
+ APMG_PS_CTRL_VAL_RESET_REQ))) {
+ /*
+ * Keep the restart process from trying to send host
+ * commands by clearing the ready bit.
+ */
+ clear_bit(STATUS_READY, &trans->shrd->status);
+ clear_bit(STATUS_HCMD_ACTIVE, &trans->shrd->status);
+ wake_up_interruptible(&priv->shrd->wait_command_queue);
+ IWL_ERR(trans, "RF is used by WiMAX\n");
+ return;
+ }
+
+ IWL_ERR(trans, "Loaded firmware version: %s\n",
+ priv->hw->wiphy->fw_version);
+
+ iwl_dump_nic_error_log(trans);
+ iwl_dump_csr(trans);
+ iwl_dump_fh(trans, NULL, false);
+ iwl_dump_nic_event_log(trans, false, NULL, false);
+#ifdef CONFIG_IWLWIFI_DEBUG
+ if (iwl_get_debug_level(trans->shrd) & IWL_DL_FW_ERRORS)
+ iwl_print_rx_config_cmd(priv(trans), IWL_RXON_CTX_BSS);
+#endif
+
+ iwlagn_fw_error(priv, false);
+}
+
+#define EVENT_START_OFFSET (4 * sizeof(u32))
+
+/**
+ * iwl_print_event_log - Dump error event log to syslog
+ *
+ */
+static int iwl_print_event_log(struct iwl_trans *trans, u32 start_idx,
+ u32 num_events, u32 mode,
+ int pos, char **buf, size_t bufsz)
+{
+ u32 i;
+ u32 base; /* SRAM byte address of event log header */
+ u32 event_size; /* 2 u32s, or 3 u32s if timestamp recorded */
+ u32 ptr; /* SRAM byte address of log data */
+ u32 ev, time, data; /* event log data */
+ unsigned long reg_flags;
+ struct iwl_priv *priv = priv(trans);
+
+ if (num_events == 0)
+ return pos;
+
+ base = priv->device_pointers.log_event_table;
+ if (priv->ucode_type == IWL_UCODE_INIT) {
+ if (!base)
+ base = priv->init_evtlog_ptr;
+ } else {
+ if (!base)
+ base = priv->inst_evtlog_ptr;
+ }
+
+ if (mode == 0)
+ event_size = 2 * sizeof(u32);
+ else
+ event_size = 3 * sizeof(u32);
+
+ ptr = base + EVENT_START_OFFSET + (start_idx * event_size);
+
+ /* Make sure device is powered up for SRAM reads */
+ spin_lock_irqsave(&bus(trans)->reg_lock, reg_flags);
+ iwl_grab_nic_access(bus(trans));
+
+ /* Set starting address; reads will auto-increment */
+ iwl_write32(bus(trans), HBUS_TARG_MEM_RADDR, ptr);
+ rmb();
+
+ /* "time" is actually "data" for mode 0 (no timestamp).
+ * place event id # at far right for easier visual parsing. */
+ for (i = 0; i < num_events; i++) {
+ ev = iwl_read32(bus(trans), HBUS_TARG_MEM_RDAT);
+ time = iwl_read32(bus(trans), HBUS_TARG_MEM_RDAT);
+ if (mode == 0) {
+ /* data, ev */
+ if (bufsz) {
+ pos += scnprintf(*buf + pos, bufsz - pos,
+ "EVT_LOG:0x%08x:%04u\n",
+ time, ev);
+ } else {
+ trace_iwlwifi_dev_ucode_event(priv, 0,
+ time, ev);
+ IWL_ERR(trans, "EVT_LOG:0x%08x:%04u\n",
+ time, ev);
+ }
+ } else {
+ data = iwl_read32(bus(trans), HBUS_TARG_MEM_RDAT);
+ if (bufsz) {
+ pos += scnprintf(*buf + pos, bufsz - pos,
+ "EVT_LOGT:%010u:0x%08x:%04u\n",
+ time, data, ev);
+ } else {
+ IWL_ERR(trans, "EVT_LOGT:%010u:0x%08x:%04u\n",
+ time, data, ev);
+ trace_iwlwifi_dev_ucode_event(priv, time,
+ data, ev);
+ }
+ }
+ }
+
+ /* Allow device to power down */
+ iwl_release_nic_access(bus(trans));
+ spin_unlock_irqrestore(&bus(trans)->reg_lock, reg_flags);
+ return pos;
+}
+
+/**
+ * iwl_print_last_event_logs - Dump the newest # of event log to syslog
+ */
+static int iwl_print_last_event_logs(struct iwl_trans *trans, u32 capacity,
+ u32 num_wraps, u32 next_entry,
+ u32 size, u32 mode,
+ int pos, char **buf, size_t bufsz)
+{
+ /*
+ * display the newest DEFAULT_LOG_ENTRIES entries
+ * i.e the entries just before the next ont that uCode would fill.
+ */
+ if (num_wraps) {
+ if (next_entry < size) {
+ pos = iwl_print_event_log(trans,
+ capacity - (size - next_entry),
+ size - next_entry, mode,
+ pos, buf, bufsz);
+ pos = iwl_print_event_log(trans, 0,
+ next_entry, mode,
+ pos, buf, bufsz);
+ } else
+ pos = iwl_print_event_log(trans, next_entry - size,
+ size, mode, pos, buf, bufsz);
+ } else {
+ if (next_entry < size) {
+ pos = iwl_print_event_log(trans, 0, next_entry,
+ mode, pos, buf, bufsz);
+ } else {
+ pos = iwl_print_event_log(trans, next_entry - size,
+ size, mode, pos, buf, bufsz);
+ }
+ }
+ return pos;
+}
+
+#define DEFAULT_DUMP_EVENT_LOG_ENTRIES (20)
+
+int iwl_dump_nic_event_log(struct iwl_trans *trans, bool full_log,
+ char **buf, bool display)
+{
+ u32 base; /* SRAM byte address of event log header */
+ u32 capacity; /* event log capacity in # entries */
+ u32 mode; /* 0 - no timestamp, 1 - timestamp recorded */
+ u32 num_wraps; /* # times uCode wrapped to top of log */
+ u32 next_entry; /* index of next entry to be written by uCode */
+ u32 size; /* # entries that we'll print */
+ u32 logsize;
+ int pos = 0;
+ size_t bufsz = 0;
+ struct iwl_priv *priv = priv(trans);
+
+ base = priv->device_pointers.log_event_table;
+ if (priv->ucode_type == IWL_UCODE_INIT) {
+ logsize = priv->init_evtlog_size;
+ if (!base)
+ base = priv->init_evtlog_ptr;
+ } else {
+ logsize = priv->inst_evtlog_size;
+ if (!base)
+ base = priv->inst_evtlog_ptr;
+ }
+
+ if (!iwlagn_hw_valid_rtc_data_addr(base)) {
+ IWL_ERR(trans,
+ "Invalid event log pointer 0x%08X for %s uCode\n",
+ base,
+ (priv->ucode_type == IWL_UCODE_INIT)
+ ? "Init" : "RT");
+ return -EINVAL;
+ }
+
+ /* event log header */
+ capacity = iwl_read_targ_mem(bus(trans), base);
+ mode = iwl_read_targ_mem(bus(trans), base + (1 * sizeof(u32)));
+ num_wraps = iwl_read_targ_mem(bus(trans), base + (2 * sizeof(u32)));
+ next_entry = iwl_read_targ_mem(bus(trans), base + (3 * sizeof(u32)));
+
+ if (capacity > logsize) {
+ IWL_ERR(trans, "Log capacity %d is bogus, limit to %d "
+ "entries\n", capacity, logsize);
+ capacity = logsize;
+ }
+
+ if (next_entry > logsize) {
+ IWL_ERR(trans, "Log write index %d is bogus, limit to %d\n",
+ next_entry, logsize);
+ next_entry = logsize;
+ }
+
+ size = num_wraps ? capacity : next_entry;
+
+ /* bail out if nothing in log */
+ if (size == 0) {
+ IWL_ERR(trans, "Start IWL Event Log Dump: nothing in log\n");
+ return pos;
+ }
+
+#ifdef CONFIG_IWLWIFI_DEBUG
+ if (!(iwl_get_debug_level(trans->shrd) & IWL_DL_FW_ERRORS) && !full_log)
+ size = (size > DEFAULT_DUMP_EVENT_LOG_ENTRIES)
+ ? DEFAULT_DUMP_EVENT_LOG_ENTRIES : size;
+#else
+ size = (size > DEFAULT_DUMP_EVENT_LOG_ENTRIES)
+ ? DEFAULT_DUMP_EVENT_LOG_ENTRIES : size;
+#endif
+ IWL_ERR(trans, "Start IWL Event Log Dump: display last %u entries\n",
+ size);
+
+#ifdef CONFIG_IWLWIFI_DEBUG
+ if (display) {
+ if (full_log)
+ bufsz = capacity * 48;
+ else
+ bufsz = size * 48;
+ *buf = kmalloc(bufsz, GFP_KERNEL);
+ if (!*buf)
+ return -ENOMEM;
+ }
+ if ((iwl_get_debug_level(trans->shrd) & IWL_DL_FW_ERRORS) || full_log) {
+ /*
+ * if uCode has wrapped back to top of log,
+ * start at the oldest entry,
+ * i.e the next one that uCode would fill.
+ */
+ if (num_wraps)
+ pos = iwl_print_event_log(trans, next_entry,
+ capacity - next_entry, mode,
+ pos, buf, bufsz);
+ /* (then/else) start at top of log */
+ pos = iwl_print_event_log(trans, 0,
+ next_entry, mode, pos, buf, bufsz);
+ } else
+ pos = iwl_print_last_event_logs(trans, capacity, num_wraps,
+ next_entry, size, mode,
+ pos, buf, bufsz);
+#else
+ pos = iwl_print_last_event_logs(trans, capacity, num_wraps,
+ next_entry, size, mode,
+ pos, buf, bufsz);
+#endif
+ return pos;
+}
+
+/* tasklet for iwlagn interrupt */
+void iwl_irq_tasklet(struct iwl_trans *trans)
+{
+ u32 inta = 0;
+ u32 handled = 0;
+ unsigned long flags;
+ u32 i;
+#ifdef CONFIG_IWLWIFI_DEBUG
+ u32 inta_mask;
+#endif
+
+ struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
+ struct isr_statistics *isr_stats = &trans_pcie->isr_stats;
+
+
+ spin_lock_irqsave(&trans->shrd->lock, flags);
+
+ /* Ack/clear/reset pending uCode interrupts.
+ * Note: Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS,
+ */
+ /* There is a hardware bug in the interrupt mask function that some
+ * interrupts (i.e. CSR_INT_BIT_SCD) can still be generated even if
+ * they are disabled in the CSR_INT_MASK register. Furthermore the
+ * ICT interrupt handling mechanism has another bug that might cause
+ * these unmasked interrupts fail to be detected. We workaround the
+ * hardware bugs here by ACKing all the possible interrupts so that
+ * interrupt coalescing can still be achieved.
+ */
+ iwl_write32(bus(trans), CSR_INT,
+ trans_pcie->inta | ~trans_pcie->inta_mask);
+
+ inta = trans_pcie->inta;
+
+#ifdef CONFIG_IWLWIFI_DEBUG
+ if (iwl_get_debug_level(trans->shrd) & IWL_DL_ISR) {
+ /* just for debug */
+ inta_mask = iwl_read32(bus(trans), CSR_INT_MASK);
+ IWL_DEBUG_ISR(trans, "inta 0x%08x, enabled 0x%08x\n ",
+ inta, inta_mask);
+ }
+#endif
+
+ spin_unlock_irqrestore(&trans->shrd->lock, flags);
+
+ /* saved interrupt in inta variable now we can reset trans_pcie->inta */
+ trans_pcie->inta = 0;
+
+ /* Now service all interrupt bits discovered above. */
+ if (inta & CSR_INT_BIT_HW_ERR) {
+ IWL_ERR(trans, "Hardware error detected. Restarting.\n");
+
+ /* Tell the device to stop sending interrupts */
+ iwl_disable_interrupts(trans);
+
+ isr_stats->hw++;
+ iwl_irq_handle_error(trans);
+
+ handled |= CSR_INT_BIT_HW_ERR;
+
+ return;
+ }
+
+#ifdef CONFIG_IWLWIFI_DEBUG
+ if (iwl_get_debug_level(trans->shrd) & (IWL_DL_ISR)) {
+ /* NIC fires this, but we don't use it, redundant with WAKEUP */
+ if (inta & CSR_INT_BIT_SCD) {
+ IWL_DEBUG_ISR(trans, "Scheduler finished to transmit "
+ "the frame/frames.\n");
+ isr_stats->sch++;
+ }
+
+ /* Alive notification via Rx interrupt will do the real work */
+ if (inta & CSR_INT_BIT_ALIVE) {
+ IWL_DEBUG_ISR(trans, "Alive interrupt\n");
+ isr_stats->alive++;
+ }
+ }
+#endif
+ /* Safely ignore these bits for debug checks below */
+ inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE);
+
+ /* HW RF KILL switch toggled */
+ if (inta & CSR_INT_BIT_RF_KILL) {
+ int hw_rf_kill = 0;
+ if (!(iwl_read32(bus(trans), CSR_GP_CNTRL) &
+ CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW))
+ hw_rf_kill = 1;
+
+ IWL_WARN(trans, "RF_KILL bit toggled to %s.\n",
+ hw_rf_kill ? "disable radio" : "enable radio");
+
+ isr_stats->rfkill++;
+
+ /* driver only loads ucode once setting the interface up.
+ * the driver allows loading the ucode even if the radio
+ * is killed. Hence update the killswitch state here. The
+ * rfkill handler will care about restarting if needed.
+ */
+ if (!test_bit(STATUS_ALIVE, &trans->shrd->status)) {
+ if (hw_rf_kill)
+ set_bit(STATUS_RF_KILL_HW,
+ &trans->shrd->status);
+ else
+ clear_bit(STATUS_RF_KILL_HW,
+ &trans->shrd->status);
+ iwl_set_hw_rfkill_state(priv(trans), hw_rf_kill);
+ }
+
+ handled |= CSR_INT_BIT_RF_KILL;
+ }
+
+ /* Chip got too hot and stopped itself */
+ if (inta & CSR_INT_BIT_CT_KILL) {
+ IWL_ERR(trans, "Microcode CT kill error detected.\n");
+ isr_stats->ctkill++;
+ handled |= CSR_INT_BIT_CT_KILL;
+ }
+
+ /* Error detected by uCode */
+ if (inta & CSR_INT_BIT_SW_ERR) {
+ IWL_ERR(trans, "Microcode SW error detected. "
+ " Restarting 0x%X.\n", inta);
+ isr_stats->sw++;
+ iwl_irq_handle_error(trans);
+ handled |= CSR_INT_BIT_SW_ERR;
+ }
+
+ /* uCode wakes up after power-down sleep */
+ if (inta & CSR_INT_BIT_WAKEUP) {
+ IWL_DEBUG_ISR(trans, "Wakeup interrupt\n");
+ iwl_rx_queue_update_write_ptr(trans, &trans_pcie->rxq);
+ for (i = 0; i < hw_params(trans).max_txq_num; i++)
+ iwl_txq_update_write_ptr(trans,
+ &trans_pcie->txq[i]);
+
+ isr_stats->wakeup++;
+
+ handled |= CSR_INT_BIT_WAKEUP;
+ }
+
+ /* All uCode command responses, including Tx command responses,
+ * Rx "responses" (frame-received notification), and other
+ * notifications from uCode come through here*/
+ if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX |
+ CSR_INT_BIT_RX_PERIODIC)) {
+ IWL_DEBUG_ISR(trans, "Rx interrupt\n");
+ if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) {
+ handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX);
+ iwl_write32(bus(trans), CSR_FH_INT_STATUS,
+ CSR_FH_INT_RX_MASK);
+ }
+ if (inta & CSR_INT_BIT_RX_PERIODIC) {
+ handled |= CSR_INT_BIT_RX_PERIODIC;
+ iwl_write32(bus(trans),
+ CSR_INT, CSR_INT_BIT_RX_PERIODIC);
+ }
+ /* Sending RX interrupt require many steps to be done in the
+ * the device:
+ * 1- write interrupt to current index in ICT table.
+ * 2- dma RX frame.
+ * 3- update RX shared data to indicate last write index.
+ * 4- send interrupt.
+ * This could lead to RX race, driver could receive RX interrupt
+ * but the shared data changes does not reflect this;
+ * periodic interrupt will detect any dangling Rx activity.
+ */
+
+ /* Disable periodic interrupt; we use it as just a one-shot. */
+ iwl_write8(bus(trans), CSR_INT_PERIODIC_REG,
+ CSR_INT_PERIODIC_DIS);
+ iwl_rx_handle(trans);
+
+ /*
+ * Enable periodic interrupt in 8 msec only if we received
+ * real RX interrupt (instead of just periodic int), to catch
+ * any dangling Rx interrupt. If it was just the periodic
+ * interrupt, there was no dangling Rx activity, and no need
+ * to extend the periodic interrupt; one-shot is enough.
+ */
+ if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX))
+ iwl_write8(bus(trans), CSR_INT_PERIODIC_REG,
+ CSR_INT_PERIODIC_ENA);
+
+ isr_stats->rx++;
+ }
+
+ /* This "Tx" DMA channel is used only for loading uCode */
+ if (inta & CSR_INT_BIT_FH_TX) {
+ iwl_write32(bus(trans), CSR_FH_INT_STATUS, CSR_FH_INT_TX_MASK);
+ IWL_DEBUG_ISR(trans, "uCode load interrupt\n");
+ isr_stats->tx++;
+ handled |= CSR_INT_BIT_FH_TX;
+ /* Wake up uCode load routine, now that load is complete */
+ priv(trans)->ucode_write_complete = 1;
+ wake_up_interruptible(&trans->shrd->wait_command_queue);
+ }
+
+ if (inta & ~handled) {
+ IWL_ERR(trans, "Unhandled INTA bits 0x%08x\n", inta & ~handled);
+ isr_stats->unhandled++;
+ }
+
+ if (inta & ~(trans_pcie->inta_mask)) {
+ IWL_WARN(trans, "Disabled INTA bits 0x%08x were pending\n",
+ inta & ~trans_pcie->inta_mask);
+ }
+
+ /* Re-enable all interrupts */
+ /* only Re-enable if disabled by irq */
+ if (test_bit(STATUS_INT_ENABLED, &trans->shrd->status))
+ iwl_enable_interrupts(trans);
+ /* Re-enable RF_KILL if it occurred */
+ else if (handled & CSR_INT_BIT_RF_KILL)
+ iwl_enable_rfkill_int(priv(trans));
+}
+
+/******************************************************************************
+ *
+ * ICT functions
+ *
+ ******************************************************************************/
+#define ICT_COUNT (PAGE_SIZE/sizeof(u32))
+
+/* Free dram table */
+void iwl_free_isr_ict(struct iwl_trans *trans)
+{
+ struct iwl_trans_pcie *trans_pcie =
+ IWL_TRANS_GET_PCIE_TRANS(trans);
+
+ if (trans_pcie->ict_tbl_vir) {
+ dma_free_coherent(bus(trans)->dev,
+ (sizeof(u32) * ICT_COUNT) + PAGE_SIZE,
+ trans_pcie->ict_tbl_vir,
+ trans_pcie->ict_tbl_dma);
+ trans_pcie->ict_tbl_vir = NULL;
+ memset(&trans_pcie->ict_tbl_dma, 0,
+ sizeof(trans_pcie->ict_tbl_dma));
+ memset(&trans_pcie->aligned_ict_tbl_dma, 0,
+ sizeof(trans_pcie->aligned_ict_tbl_dma));
+ }
+}
+
+
+/* allocate dram shared table it is a PAGE_SIZE aligned
+ * also reset all data related to ICT table interrupt.
+ */
+int iwl_alloc_isr_ict(struct iwl_trans *trans)
+{
+ struct iwl_trans_pcie *trans_pcie =
+ IWL_TRANS_GET_PCIE_TRANS(trans);
+
+ /* allocate shrared data table */
+ trans_pcie->ict_tbl_vir =
+ dma_alloc_coherent(bus(trans)->dev,
+ (sizeof(u32) * ICT_COUNT) + PAGE_SIZE,
+ &trans_pcie->ict_tbl_dma, GFP_KERNEL);
+ if (!trans_pcie->ict_tbl_vir)
+ return -ENOMEM;
+
+ /* align table to PAGE_SIZE boundary */
+ trans_pcie->aligned_ict_tbl_dma =
+ ALIGN(trans_pcie->ict_tbl_dma, PAGE_SIZE);
+
+ IWL_DEBUG_ISR(trans, "ict dma addr %Lx dma aligned %Lx diff %d\n",
+ (unsigned long long)trans_pcie->ict_tbl_dma,
+ (unsigned long long)trans_pcie->aligned_ict_tbl_dma,
+ (int)(trans_pcie->aligned_ict_tbl_dma -
+ trans_pcie->ict_tbl_dma));
+
+ trans_pcie->ict_tbl = trans_pcie->ict_tbl_vir +
+ (trans_pcie->aligned_ict_tbl_dma -
+ trans_pcie->ict_tbl_dma);
+
+ IWL_DEBUG_ISR(trans, "ict vir addr %p vir aligned %p diff %d\n",
+ trans_pcie->ict_tbl, trans_pcie->ict_tbl_vir,
+ (int)(trans_pcie->aligned_ict_tbl_dma -
+ trans_pcie->ict_tbl_dma));
+
+ /* reset table and index to all 0 */
+ memset(trans_pcie->ict_tbl_vir, 0,
+ (sizeof(u32) * ICT_COUNT) + PAGE_SIZE);
+ trans_pcie->ict_index = 0;
+
+ /* add periodic RX interrupt */
+ trans_pcie->inta_mask |= CSR_INT_BIT_RX_PERIODIC;
+ return 0;
+}
+
+/* Device is going up inform it about using ICT interrupt table,
+ * also we need to tell the driver to start using ICT interrupt.
+ */
+int iwl_reset_ict(struct iwl_trans *trans)
+{
+ u32 val;
+ unsigned long flags;
+ struct iwl_trans_pcie *trans_pcie =
+ IWL_TRANS_GET_PCIE_TRANS(trans);
+
+ if (!trans_pcie->ict_tbl_vir)
+ return 0;
+
+ spin_lock_irqsave(&trans->shrd->lock, flags);
+ iwl_disable_interrupts(trans);
+
+ memset(&trans_pcie->ict_tbl[0], 0, sizeof(u32) * ICT_COUNT);
+
+ val = trans_pcie->aligned_ict_tbl_dma >> PAGE_SHIFT;
+
+ val |= CSR_DRAM_INT_TBL_ENABLE;
+ val |= CSR_DRAM_INIT_TBL_WRAP_CHECK;
+
+ IWL_DEBUG_ISR(trans, "CSR_DRAM_INT_TBL_REG =0x%X "
+ "aligned dma address %Lx\n",
+ val,
+ (unsigned long long)trans_pcie->aligned_ict_tbl_dma);
+
+ iwl_write32(bus(trans), CSR_DRAM_INT_TBL_REG, val);
+ trans_pcie->use_ict = true;
+ trans_pcie->ict_index = 0;
+ iwl_write32(bus(trans), CSR_INT, trans_pcie->inta_mask);
+ iwl_enable_interrupts(trans);
+ spin_unlock_irqrestore(&trans->shrd->lock, flags);
+
+ return 0;
+}
+
+/* Device is going down disable ict interrupt usage */
+void iwl_disable_ict(struct iwl_trans *trans)
+{
+ struct iwl_trans_pcie *trans_pcie =
+ IWL_TRANS_GET_PCIE_TRANS(trans);
+
+ unsigned long flags;
+
+ spin_lock_irqsave(&trans->shrd->lock, flags);
+ trans_pcie->use_ict = false;
+ spin_unlock_irqrestore(&trans->shrd->lock, flags);
+}
+
+static irqreturn_t iwl_isr(int irq, void *data)
+{
+ struct iwl_trans *trans = data;
+ struct iwl_trans_pcie *trans_pcie;
+ u32 inta, inta_mask;
+ unsigned long flags;
+#ifdef CONFIG_IWLWIFI_DEBUG
+ u32 inta_fh;
+#endif
+ if (!trans)
+ return IRQ_NONE;
+
+ trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
+
+ spin_lock_irqsave(&trans->shrd->lock, flags);
+
+ /* Disable (but don't clear!) interrupts here to avoid
+ * back-to-back ISRs and sporadic interrupts from our NIC.
+ * If we have something to service, the tasklet will re-enable ints.
+ * If we *don't* have something, we'll re-enable before leaving here. */
+ inta_mask = iwl_read32(bus(trans), CSR_INT_MASK); /* just for debug */
+ iwl_write32(bus(trans), CSR_INT_MASK, 0x00000000);
+
+ /* Discover which interrupts are active/pending */
+ inta = iwl_read32(bus(trans), CSR_INT);
+
+ /* Ignore interrupt if there's nothing in NIC to service.
+ * This may be due to IRQ shared with another device,
+ * or due to sporadic interrupts thrown from our NIC. */
+ if (!inta) {
+ IWL_DEBUG_ISR(trans, "Ignore interrupt, inta == 0\n");
+ goto none;
+ }
+
+ if ((inta == 0xFFFFFFFF) || ((inta & 0xFFFFFFF0) == 0xa5a5a5a0)) {
+ /* Hardware disappeared. It might have already raised
+ * an interrupt */
+ IWL_WARN(trans, "HARDWARE GONE?? INTA == 0x%08x\n", inta);
+ goto unplugged;
+ }
+
+#ifdef CONFIG_IWLWIFI_DEBUG
+ if (iwl_get_debug_level(trans->shrd) & (IWL_DL_ISR)) {
+ inta_fh = iwl_read32(bus(trans), CSR_FH_INT_STATUS);
+ IWL_DEBUG_ISR(trans, "ISR inta 0x%08x, enabled 0x%08x, "
+ "fh 0x%08x\n", inta, inta_mask, inta_fh);
+ }
+#endif
+
+ trans_pcie->inta |= inta;
+ /* iwl_irq_tasklet() will service interrupts and re-enable them */
+ if (likely(inta))
+ tasklet_schedule(&trans_pcie->irq_tasklet);
+ else if (test_bit(STATUS_INT_ENABLED, &trans->shrd->status) &&
+ !trans_pcie->inta)
+ iwl_enable_interrupts(trans);
+
+ unplugged:
+ spin_unlock_irqrestore(&trans->shrd->lock, flags);
+ return IRQ_HANDLED;
+
+ none:
+ /* re-enable interrupts here since we don't have anything to service. */
+ /* only Re-enable if disabled by irq and no schedules tasklet. */
+ if (test_bit(STATUS_INT_ENABLED, &trans->shrd->status) &&
+ !trans_pcie->inta)
+ iwl_enable_interrupts(trans);
+
+ spin_unlock_irqrestore(&trans->shrd->lock, flags);
+ return IRQ_NONE;
+}
+
+/* interrupt handler using ict table, with this interrupt driver will
+ * stop using INTA register to get device's interrupt, reading this register
+ * is expensive, device will write interrupts in ICT dram table, increment
+ * index then will fire interrupt to driver, driver will OR all ICT table
+ * entries from current index up to table entry with 0 value. the result is
+ * the interrupt we need to service, driver will set the entries back to 0 and
+ * set index.
+ */
+irqreturn_t iwl_isr_ict(int irq, void *data)
+{
+ struct iwl_trans *trans = data;
+ struct iwl_trans_pcie *trans_pcie;
+ u32 inta, inta_mask;
+ u32 val = 0;
+ unsigned long flags;
+
+ if (!trans)
+ return IRQ_NONE;
+
+ trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
+
+ /* dram interrupt table not set yet,
+ * use legacy interrupt.
+ */
+ if (!trans_pcie->use_ict)
+ return iwl_isr(irq, data);
+
+ spin_lock_irqsave(&trans->shrd->lock, flags);
+
+ /* Disable (but don't clear!) interrupts here to avoid
+ * back-to-back ISRs and sporadic interrupts from our NIC.
+ * If we have something to service, the tasklet will re-enable ints.
+ * If we *don't* have something, we'll re-enable before leaving here.
+ */
+ inta_mask = iwl_read32(bus(trans), CSR_INT_MASK); /* just for debug */
+ iwl_write32(bus(trans), CSR_INT_MASK, 0x00000000);
+
+
+ /* Ignore interrupt if there's nothing in NIC to service.
+ * This may be due to IRQ shared with another device,
+ * or due to sporadic interrupts thrown from our NIC. */
+ if (!trans_pcie->ict_tbl[trans_pcie->ict_index]) {
+ IWL_DEBUG_ISR(trans, "Ignore interrupt, inta == 0\n");
+ goto none;
+ }
+
+ /* read all entries that not 0 start with ict_index */
+ while (trans_pcie->ict_tbl[trans_pcie->ict_index]) {
+
+ val |= le32_to_cpu(trans_pcie->ict_tbl[trans_pcie->ict_index]);
+ IWL_DEBUG_ISR(trans, "ICT index %d value 0x%08X\n",
+ trans_pcie->ict_index,
+ le32_to_cpu(
+ trans_pcie->ict_tbl[trans_pcie->ict_index]));
+ trans_pcie->ict_tbl[trans_pcie->ict_index] = 0;
+ trans_pcie->ict_index =
+ iwl_queue_inc_wrap(trans_pcie->ict_index, ICT_COUNT);
+
+ }
+
+ /* We should not get this value, just ignore it. */
+ if (val == 0xffffffff)
+ val = 0;
+
+ /*
+ * this is a w/a for a h/w bug. the h/w bug may cause the Rx bit
+ * (bit 15 before shifting it to 31) to clear when using interrupt
+ * coalescing. fortunately, bits 18 and 19 stay set when this happens
+ * so we use them to decide on the real state of the Rx bit.
+ * In order words, bit 15 is set if bit 18 or bit 19 are set.
+ */
+ if (val & 0xC0000)
+ val |= 0x8000;
+
+ inta = (0xff & val) | ((0xff00 & val) << 16);
+ IWL_DEBUG_ISR(trans, "ISR inta 0x%08x, enabled 0x%08x ict 0x%08x\n",
+ inta, inta_mask, val);
+
+ inta &= trans_pcie->inta_mask;
+ trans_pcie->inta |= inta;
+
+ /* iwl_irq_tasklet() will service interrupts and re-enable them */
+ if (likely(inta))
+ tasklet_schedule(&trans_pcie->irq_tasklet);
+ else if (test_bit(STATUS_INT_ENABLED, &trans->shrd->status) &&
+ !trans_pcie->inta) {
+ /* Allow interrupt if was disabled by this handler and
+ * no tasklet was schedules, We should not enable interrupt,
+ * tasklet will enable it.
+ */
+ iwl_enable_interrupts(trans);
+ }
+
+ spin_unlock_irqrestore(&trans->shrd->lock, flags);
+ return IRQ_HANDLED;
+
+ none:
+ /* re-enable interrupts here since we don't have anything to service.
+ * only Re-enable if disabled by irq.
+ */
+ if (test_bit(STATUS_INT_ENABLED, &trans->shrd->status) &&
+ !trans_pcie->inta)
+ iwl_enable_interrupts(trans);
+
+ spin_unlock_irqrestore(&trans->shrd->lock, flags);
+ return IRQ_NONE;
+}