serial: sh-sci: Move private definitions to private header file
Move private register definitions and enums from the public
<linux/serial_sci.h> header file to the driver private "sh-sci.h" header
file.
The common Serial Control Register definitions are left in the public
header file, as they're needed to fill in plat_sci_port.scscr on legacy
systems not using DT.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/tty/serial/sh-sci.h b/drivers/tty/serial/sh-sci.h
index 3507174..238ad0c 100644
--- a/drivers/tty/serial/sh-sci.h
+++ b/drivers/tty/serial/sh-sci.h
@@ -2,6 +2,82 @@
#include <linux/io.h>
#include <linux/gpio.h>
+#define SCI_MAJOR 204
+#define SCI_MINOR_START 8
+
+
+/*
+ * SCI register subset common for all port types.
+ * Not all registers will exist on all parts.
+ */
+enum {
+ SCSMR, /* Serial Mode Register */
+ SCBRR, /* Bit Rate Register */
+ SCSCR, /* Serial Control Register */
+ SCxSR, /* Serial Status Register */
+ SCFCR, /* FIFO Control Register */
+ SCFDR, /* FIFO Data Count Register */
+ SCxTDR, /* Transmit (FIFO) Data Register */
+ SCxRDR, /* Receive (FIFO) Data Register */
+ SCLSR, /* Line Status Register */
+ SCTFDR, /* Transmit FIFO Data Count Register */
+ SCRFDR, /* Receive FIFO Data Count Register */
+ SCSPTR, /* Serial Port Register */
+ HSSRR, /* Sampling Rate Register */
+
+ SCIx_NR_REGS,
+};
+
+
+/* SCSMR (Serial Mode Register) */
+#define SCSMR_CHR (1 << 6) /* 7-bit Character Length */
+#define SCSMR_PE (1 << 5) /* Parity Enable */
+#define SCSMR_ODD (1 << 4) /* Odd Parity */
+#define SCSMR_STOP (1 << 3) /* Stop Bit Length */
+#define SCSMR_CKS 0x0003 /* Clock Select */
+
+/* Serial Control Register, SCIFA/SCIFB only bits */
+#define SCSCR_TDRQE (1 << 15) /* Tx Data Transfer Request Enable */
+#define SCSCR_RDRQE (1 << 14) /* Rx Data Transfer Request Enable */
+
+/* SCxSR (Serial Status Register) on SCI */
+#define SCI_TDRE 0x80 /* Transmit Data Register Empty */
+#define SCI_RDRF 0x40 /* Receive Data Register Full */
+#define SCI_ORER 0x20 /* Overrun Error */
+#define SCI_FER 0x10 /* Framing Error */
+#define SCI_PER 0x08 /* Parity Error */
+#define SCI_TEND 0x04 /* Transmit End */
+
+#define SCI_DEFAULT_ERROR_MASK (SCI_PER | SCI_FER)
+
+/* SCxSR (Serial Status Register) on SCIF, HSCIF */
+#define SCIF_ER 0x0080 /* Receive Error */
+#define SCIF_TEND 0x0040 /* Transmission End */
+#define SCIF_TDFE 0x0020 /* Transmit FIFO Data Empty */
+#define SCIF_BRK 0x0010 /* Break Detect */
+#define SCIF_FER 0x0008 /* Framing Error */
+#define SCIF_PER 0x0004 /* Parity Error */
+#define SCIF_RDF 0x0002 /* Receive FIFO Data Full */
+#define SCIF_DR 0x0001 /* Receive Data Ready */
+
+#define SCIF_DEFAULT_ERROR_MASK (SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK)
+
+/* SCFCR (FIFO Control Register) */
+#define SCFCR_MCE 0x0008
+#define SCFCR_TFRST 0x0004
+#define SCFCR_RFRST 0x0002
+#define SCFCR_LOOP (1 << 0) /* Loopback Test */
+
+/* SCSPTR (Serial Port Register), optional */
+#define SCSPTR_RTSIO (1 << 7) /* Serial Port RTS Pin Input/Output */
+#define SCSPTR_CTSIO (1 << 5) /* Serial Port CTS Pin Input/Output */
+#define SCSPTR_SPB2IO (1 << 1) /* Serial Port Break Input/Output */
+#define SCSPTR_SPB2DT (1 << 0) /* Serial Port Break Data */
+
+/* HSSRR HSCIF */
+#define HSCIF_SRE 0x8000 /* Sampling Rate Register Enable */
+
+
#define SCxSR_TEND(port) (((port)->type == PORT_SCI) ? SCI_TEND : SCIF_TEND)
#define SCxSR_RDxF(port) (((port)->type == PORT_SCI) ? SCI_RDRF : SCIF_RDF)
#define SCxSR_TDxE(port) (((port)->type == PORT_SCI) ? SCI_TDRE : SCIF_TDFE)
@@ -28,10 +104,3 @@
# define SCxSR_BREAK_CLEAR(port) (((port)->type == PORT_SCI) ? 0xc4 : 0x00e3)
#endif
-/* SCFCR */
-#define SCFCR_RFRST 0x0002
-#define SCFCR_TFRST 0x0004
-#define SCFCR_MCE 0x0008
-
-#define SCI_MAJOR 204
-#define SCI_MINOR_START 8