b43: use one shared function for setting MAC frequency
By the way add few chipsets that were tracked with "wl" dumps.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/b43/phy_lcn.c b/drivers/net/wireless/b43/phy_lcn.c
index 0bafa3b..e76bbdf 100644
--- a/drivers/net/wireless/b43/phy_lcn.c
+++ b/drivers/net/wireless/b43/phy_lcn.c
@@ -54,39 +54,6 @@
B43_SENSE_VBAT,
};
-/* In theory it's PHY common function, move if needed */
-/* brcms_b_switch_macfreq */
-static void b43_phy_switch_macfreq(struct b43_wldev *dev, u8 spurmode)
-{
- if (dev->dev->chip_id == 43224 || dev->dev->chip_id == 43225) {
- switch (spurmode) {
- case 2: /* 126 Mhz */
- b43_write16(dev, B43_MMIO_TSF_CLK_FRAC_LOW, 0x2082);
- b43_write16(dev, B43_MMIO_TSF_CLK_FRAC_HIGH, 0x8);
- break;
- case 1: /* 123 Mhz */
- b43_write16(dev, B43_MMIO_TSF_CLK_FRAC_LOW, 0x5341);
- b43_write16(dev, B43_MMIO_TSF_CLK_FRAC_HIGH, 0x8);
- break;
- default: /* 120 Mhz */
- b43_write16(dev, B43_MMIO_TSF_CLK_FRAC_LOW, 0x8889);
- b43_write16(dev, B43_MMIO_TSF_CLK_FRAC_HIGH, 0x8);
- break;
- }
- } else if (dev->phy.type == B43_PHYTYPE_LCN) {
- switch (spurmode) {
- case 1: /* 82 Mhz */
- b43_write16(dev, B43_MMIO_TSF_CLK_FRAC_LOW, 0x7CE0);
- b43_write16(dev, B43_MMIO_TSF_CLK_FRAC_HIGH, 0xC);
- break;
- default: /* 80 Mhz */
- b43_write16(dev, B43_MMIO_TSF_CLK_FRAC_LOW, 0xCCCD);
- b43_write16(dev, B43_MMIO_TSF_CLK_FRAC_HIGH, 0xC);
- break;
- }
- }
-}
-
/**************************************************
* Radio 2064.
**************************************************/
@@ -609,7 +576,7 @@
b43_phy_write(dev, 0x93b, ((0 << 13) + 23));
b43_phy_write(dev, 0x93c, ((0 << 13) + 1989));
}
- b43_phy_switch_macfreq(dev, enable);
+ b43_mac_switch_freq(dev, enable);
}
/**************************************************