wil6210: Align Rx frames on 4*n+2 by having SNAP
For the networking code and for hardware network accelerators,
it is better to have IP header 4*n aligned. On the other side,
DMA on Rx path require buffer to be aligned on 4*n as well.
Having 14 bytes of Ethernet header, these 2 alignment
requests are in contradiction.
To solve this, order hardware offload block to not remove
SNAP header. This adds extra 6 bytes between addresses and
ethertype, making it 20 bytes total. This way, both buffer and
IP header are 4*n aligned. Remaining is only to remove SNAP
by shifting addresses 6 bytes. This involves data copying, so
this feature should be disabled unless required by the platform.
Module parameter "rx_align_2" (bool, default - false)
introduced to control this feature. Feature is completely disabled
when parameter is false.
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
diff --git a/drivers/net/wireless/ath/wil6210/txrx.c b/drivers/net/wireless/ath/wil6210/txrx.c
index 3feb86c4..2453470 100644
--- a/drivers/net/wireless/ath/wil6210/txrx.c
+++ b/drivers/net/wireless/ath/wil6210/txrx.c
@@ -33,6 +33,15 @@
MODULE_PARM_DESC(rtap_include_phy_info,
" Include PHY info in the radiotap header, default - no");
+bool rx_align_2;
+module_param(rx_align_2, bool, S_IRUGO);
+MODULE_PARM_DESC(rx_align_2, " align Rx buffers on 4*n+2, default - no");
+
+static inline uint wil_rx_snaplen(void)
+{
+ return rx_align_2 ? 6 : 0;
+}
+
static inline int wil_vring_is_empty(struct vring *vring)
{
return vring->swhead == vring->swtail;
@@ -209,7 +218,7 @@
u32 i, int headroom)
{
struct device *dev = wil_to_dev(wil);
- unsigned int sz = mtu_max + ETH_HLEN;
+ unsigned int sz = mtu_max + ETH_HLEN + wil_rx_snaplen();
struct vring_rx_desc dd, *d = ⅆ
volatile struct vring_rx_desc *_d = &vring->va[i].rx;
dma_addr_t pa;
@@ -365,7 +374,8 @@
struct vring_rx_desc *d;
struct sk_buff *skb;
dma_addr_t pa;
- unsigned int sz = mtu_max + ETH_HLEN;
+ unsigned int snaplen = wil_rx_snaplen();
+ unsigned int sz = mtu_max + ETH_HLEN + snaplen;
u16 dmalen;
u8 ftype;
int cid;
@@ -438,7 +448,7 @@
return NULL;
}
- if (unlikely(skb->len < ETH_HLEN)) {
+ if (unlikely(skb->len < ETH_HLEN + snaplen)) {
wil_err(wil, "Short frame, len = %d\n", skb->len);
/* TODO: process it (i.e. BAR) */
kfree_skb(skb);
@@ -460,6 +470,17 @@
*/
}
+ if (snaplen) {
+ /* Packet layout
+ * +-------+-------+---------+------------+------+
+ * | SA(6) | DA(6) | SNAP(6) | ETHTYPE(2) | DATA |
+ * +-------+-------+---------+------------+------+
+ * Need to remove SNAP, shifting SA and DA forward
+ */
+ memmove(skb->data + snaplen, skb->data, 2 * ETH_ALEN);
+ skb_pull(skb, snaplen);
+ }
+
return skb;
}
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index c1a71ab..a6b096e 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -28,6 +28,7 @@
extern unsigned short rx_ring_overflow_thrsh;
extern int agg_wsize;
extern u32 vring_idle_trsh;
+extern bool rx_align_2;
#define WIL_NAME "wil6210"
#define WIL_FW_NAME "wil6210.fw" /* code */
diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c
index 0213135..8c18a46 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.c
+++ b/drivers/net/wireless/ath/wil6210/wmi.c
@@ -1109,6 +1109,11 @@
*/
cmd.l3_l4_ctrl |= (1 << L3_L4_CTRL_TCPIP_CHECKSUM_EN_POS);
}
+
+ if (rx_align_2)
+ cmd.l2_802_3_offload_ctrl |=
+ L2_802_3_OFFLOAD_CTRL_SNAP_KEEP_MSK;
+
/* typical time for secure PCP is 840ms */
rc = wmi_call(wil, WMI_CFG_RX_CHAIN_CMDID, &cmd, sizeof(cmd),
WMI_CFG_RX_CHAIN_DONE_EVENTID, &evt, sizeof(evt), 2000);
diff --git a/drivers/net/wireless/ath/wil6210/wmi.h b/drivers/net/wireless/ath/wil6210/wmi.h
index 8a4af61..0979650 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.h
+++ b/drivers/net/wireless/ath/wil6210/wmi.h
@@ -687,6 +687,9 @@
#define L2_802_3_OFFLOAD_CTRL_VLAN_TAG_INSERTION_POS (0)
#define L2_802_3_OFFLOAD_CTRL_VLAN_TAG_INSERTION_LEN (1)
#define L2_802_3_OFFLOAD_CTRL_VLAN_TAG_INSERTION_MSK (0x1)
+ #define L2_802_3_OFFLOAD_CTRL_SNAP_KEEP_POS (1)
+ #define L2_802_3_OFFLOAD_CTRL_SNAP_KEEP_LEN (1)
+ #define L2_802_3_OFFLOAD_CTRL_SNAP_KEEP_MSK (0x2)
u8 l2_802_3_offload_ctrl;
#define L2_NWIFI_OFFLOAD_CTRL_REMOVE_QOS_POS (0)