ath9k_hw: Enable TX IQ calibration on AR9003
To enable it we now disable and re-enable the PHY chips
after TX IQ calibration.
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_calib.c b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
index 56a9e5f..5a06503 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
@@ -739,6 +739,12 @@
*/
ar9003_hw_set_chain_masks(ah, 0x7, 0x7);
+ /* Do Tx IQ Calibration */
+ ar9003_hw_tx_iq_cal(ah);
+ REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_DIS);
+ udelay(5);
+ REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_EN);
+
/* Calibrate the AGC */
REG_WRITE(ah, AR_PHY_AGC_CONTROL,
REG_READ(ah, AR_PHY_AGC_CONTROL) |
@@ -753,10 +759,6 @@
return false;
}
- /* Do Tx IQ Calibration */
- if (ah->config.tx_iq_calibration)
- ar9003_hw_tx_iq_cal(ah);
-
/* Revert chainmasks to their original values before NF cal */
ar9003_hw_set_chain_masks(ah, ah->rxchainmask, ah->txchainmask);
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 3b55c7f..d902878 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -392,12 +392,6 @@
ah->config.rx_intr_mitigation = true;
/*
- * Tx IQ Calibration (ah->config.tx_iq_calibration) is only
- * used by AR9003, but it is showing reliability issues.
- * It will take a while to fix so this is currently disabled.
- */
-
- /*
* We need this for PCI devices only (Cardbus, PCI, miniPCI)
* _and_ if on non-uniprocessor systems (Multiprocessor/HT).
* This means we use it for all AR5416 devices, and the few
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index ffc9249..116d1c8 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -263,7 +263,6 @@
#define AR_BASE_FREQ_5GHZ 4900
#define AR_SPUR_FEEQ_BOUND_HT40 19
#define AR_SPUR_FEEQ_BOUND_HT20 10
- bool tx_iq_calibration; /* Only available for >= AR9003 */
int spurmode;
u16 spurchans[AR_EEPROM_MODAL_SPURS][2];
u8 max_txtrig_level;