V4L/DVB (5716): Tda10086,tda826x: fix tuning, STR/SNR values
Several people reported unreliable reception with the current driver.
Furthermore, STR and SNR values seem to be inverted.
This fix is based on a patch posted by Hartmut Hackman.
Thanks to Helmut Auer for testing and helping to optimize the patch.
tda826x:
- set baseband cut-off to 19 MHz
tda10086:
- change the parameters of the carrier recovery loop
- toggle register 0x02 between 0x35 (tuning) and 0x00 (locked)
- invert STR and SNR values
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
diff --git a/drivers/media/dvb/frontends/tda10086.c b/drivers/media/dvb/frontends/tda10086.c
index ccc429c..0f2d4b4 100644
--- a/drivers/media/dvb/frontends/tda10086.c
+++ b/drivers/media/dvb/frontends/tda10086.c
@@ -41,6 +41,7 @@
/* private demod data */
u32 frequency;
u32 symbol_rate;
+ bool has_lock;
};
static int debug = 0;
@@ -116,7 +117,7 @@
// misc setup
tda10086_write_byte(state, 0x01, 0x94);
tda10086_write_byte(state, 0x02, 0x35); // NOTE: TT drivers appear to disable CSWP
- tda10086_write_byte(state, 0x03, 0x64);
+ tda10086_write_byte(state, 0x03, 0xe4);
tda10086_write_byte(state, 0x04, 0x43);
tda10086_write_byte(state, 0x0c, 0x0c);
tda10086_write_byte(state, 0x1b, 0xb0); // noise threshold
@@ -146,7 +147,7 @@
// setup AGC
tda10086_write_byte(state, 0x05, 0x0B);
tda10086_write_byte(state, 0x37, 0x63);
- tda10086_write_byte(state, 0x3f, 0x03); // NOTE: flydvb uses 0x0a and varies it
+ tda10086_write_byte(state, 0x3f, 0x0a); // NOTE: flydvb varies it
tda10086_write_byte(state, 0x40, 0x64);
tda10086_write_byte(state, 0x41, 0x4f);
tda10086_write_byte(state, 0x42, 0x43);
@@ -398,6 +399,10 @@
dprintk ("%s\n", __FUNCTION__);
+ // modify parameters for tuning
+ tda10086_write_byte(state, 0x02, 0x35);
+ state->has_lock = false;
+
// set params
if (fe->ops.tuner_ops.set_params) {
fe->ops.tuner_ops.set_params(fe, fe_params);
@@ -542,8 +547,14 @@
*fe_status |= FE_HAS_VITERBI;
if (val & 0x08)
*fe_status |= FE_HAS_SYNC;
- if (val & 0x10)
+ if (val & 0x10) {
*fe_status |= FE_HAS_LOCK;
+ if (!state->has_lock) {
+ state->has_lock = true;
+ // modify parameters for stable reception
+ tda10086_write_byte(state, 0x02, 0x00);
+ }
+ }
return 0;
}
@@ -555,7 +566,7 @@
dprintk ("%s\n", __FUNCTION__);
- _str = tda10086_read_byte(state, 0x43);
+ _str = 0xff - tda10086_read_byte(state, 0x43);
*signal = (_str << 8) | _str;
return 0;
@@ -568,7 +579,7 @@
dprintk ("%s\n", __FUNCTION__);
- _snr = tda10086_read_byte(state, 0x1c);
+ _snr = 0xff - tda10086_read_byte(state, 0x1c);
*snr = (_snr << 8) | _snr;
return 0;
diff --git a/drivers/media/dvb/frontends/tda826x.c b/drivers/media/dvb/frontends/tda826x.c
index 79f971d..bd3ebc2 100644
--- a/drivers/media/dvb/frontends/tda826x.c
+++ b/drivers/media/dvb/frontends/tda826x.c
@@ -89,8 +89,8 @@
buf[2] = (1<<5) | 0x0b; // 1Mhz + 0.45 VCO
buf[3] = div >> 7;
buf[4] = div << 1;
- buf[5] = 0xff; // basedband filter to max
- buf[6] = 0xfe; // gains at max + no RF attenuation
+ buf[5] = 0x77; // baseband cut-off 19 MHz
+ buf[6] = 0xfe; // baseband gain 9 db + no RF attenuation
buf[7] = 0x83; // charge pumps at high, tests off
buf[8] = 0x80; // recommended value 4 for AMPVCO + disable ports.
buf[9] = 0x1a; // normal caltime + recommended values for SELTH + SELVTL