extcon: cros-ec: Add extcon-cros-ec driver to support display out
This is the driver for the USB Type C cable detection mechanism
built into the ChromeOS Embedded Controller on systems that
have USB Type-C ports.
At present, this allows for the presence of display out, but in
future, it may also be used to notify host and device type cables
and the presence of power.
Signed-off-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Chanwoo Choi <cw00.chio@samsung.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index 190c8f4..2b16e95 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -285,6 +285,11 @@ enum host_event_code {
EC_HOST_EVENT_HANG_DETECT = 20,
/* Hang detect logic detected a hang and warm rebooted the AP */
EC_HOST_EVENT_HANG_REBOOT = 21,
+ /* PD MCU triggering host event */
+ EC_HOST_EVENT_PD_MCU = 22,
+
+ /* EC desires to change state of host-controlled USB mux */
+ EC_HOST_EVENT_USB_MUX = 28,
/*
* The high bit of the event mask is not used as a host event code. If
@@ -2905,6 +2910,76 @@ struct ec_params_usb_pd_control {
uint8_t mux;
} __packed;
+#define PD_CTRL_RESP_ENABLED_COMMS (1 << 0) /* Communication enabled */
+#define PD_CTRL_RESP_ENABLED_CONNECTED (1 << 1) /* Device connected */
+#define PD_CTRL_RESP_ENABLED_PD_CAPABLE (1 << 2) /* Partner is PD capable */
+
+struct ec_response_usb_pd_control_v1 {
+ uint8_t enabled;
+ uint8_t role;
+ uint8_t polarity;
+ char state[32];
+} __packed;
+
+#define EC_CMD_USB_PD_PORTS 0x102
+
+struct ec_response_usb_pd_ports {
+ uint8_t num_ports;
+} __packed;
+
+#define EC_CMD_USB_PD_POWER_INFO 0x103
+
+#define PD_POWER_CHARGING_PORT 0xff
+struct ec_params_usb_pd_power_info {
+ uint8_t port;
+} __packed;
+
+enum usb_chg_type {
+ USB_CHG_TYPE_NONE,
+ USB_CHG_TYPE_PD,
+ USB_CHG_TYPE_C,
+ USB_CHG_TYPE_PROPRIETARY,
+ USB_CHG_TYPE_BC12_DCP,
+ USB_CHG_TYPE_BC12_CDP,
+ USB_CHG_TYPE_BC12_SDP,
+ USB_CHG_TYPE_OTHER,
+ USB_CHG_TYPE_VBUS,
+ USB_CHG_TYPE_UNKNOWN,
+};
+
+struct usb_chg_measures {
+ uint16_t voltage_max;
+ uint16_t voltage_now;
+ uint16_t current_max;
+ uint16_t current_lim;
+} __packed;
+
+struct ec_response_usb_pd_power_info {
+ uint8_t role;
+ uint8_t type;
+ uint8_t dualrole;
+ uint8_t reserved1;
+ struct usb_chg_measures meas;
+ uint32_t max_power;
+} __packed;
+
+/* Get info about USB-C SS muxes */
+#define EC_CMD_USB_PD_MUX_INFO 0x11a
+
+struct ec_params_usb_pd_mux_info {
+ uint8_t port; /* USB-C port number */
+} __packed;
+
+/* Flags representing mux state */
+#define USB_PD_MUX_USB_ENABLED (1 << 0)
+#define USB_PD_MUX_DP_ENABLED (1 << 1)
+#define USB_PD_MUX_POLARITY_INVERTED (1 << 2)
+#define USB_PD_MUX_HPD_IRQ (1 << 3)
+
+struct ec_response_usb_pd_mux_info {
+ uint8_t flags; /* USB_PD_MUX_*-encoded USB mux state */
+} __packed;
+
/*****************************************************************************/
/*
* Passthru commands