ARM: dts: aspeed: Add HXT StarDragon 4800 REP2 BMC
The HXT StarDragon 4800 REP2 (Reference Evaluation Platform) is
an aarch64 ARMv8 server platform with an ast2520 BMC.
Signed-off-by: Yuan Yao <yao.yuan@linaro.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index b5bd3de..a1b8816 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1199,6 +1199,7 @@
dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-ast2500-evb.dtb \
aspeed-bmc-arm-centriq2400-rep.dtb \
+ aspeed-bmc-arm-stardragon4800-rep2.dtb \
aspeed-bmc-intel-s2600wf.dtb \
aspeed-bmc-opp-lanyang.dtb \
aspeed-bmc-opp-palmetto.dtb \
diff --git a/arch/arm/boot/dts/aspeed-bmc-arm-stardragon4800-rep2.dts b/arch/arm/boot/dts/aspeed-bmc-arm-stardragon4800-rep2.dts
new file mode 100644
index 0000000..bdfd8c9
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-arm-stardragon4800-rep2.dts
@@ -0,0 +1,207 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+ model = "HXT StarDragon 4800 REP2 AST2520";
+ compatible = "hxt,stardragon4800-rep2-bmc", "aspeed,ast2500";
+
+ chosen {
+ stdout-path = &uart5;
+ bootargs = "console=ttyS4,115200 earlyprintk";
+ };
+
+ memory@80000000 {
+ reg = <0x80000000 0x40000000>;
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+ <&adc 4>, <&adc 5>, <&adc 6>, <&adc 8>;
+ };
+
+ iio-hwmon-battery {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 7>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ system_fault1 {
+ label = "System_fault1";
+ gpios = <&gpio ASPEED_GPIO(I, 3) GPIO_ACTIVE_LOW>;
+ };
+
+ system_fault2 {
+ label = "System_fault2";
+ gpios = <&gpio ASPEED_GPIO(I, 2) GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&fmc {
+ status = "okay";
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "bmc";
+#include "openbmc-flash-layout.dtsi"
+ };
+};
+
+&spi1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1_default>;
+ flash@0 {
+ status = "okay";
+ };
+};
+
+&spi2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi2ck_default
+ &pinctrl_spi2miso_default
+ &pinctrl_spi2mosi_default
+ &pinctrl_spi2cs0_default>;
+};
+
+&uart3 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd3_default &pinctrl_rxd3_default>;
+ current-speed = <115200>;
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&mac0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+};
+
+&mac1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii2_default>;
+ use-ncsi;
+};
+
+&i2c0 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+
+ tmp421@1e {
+ compatible = "ti,tmp421";
+ reg = <0x1e>;
+ };
+ tmp421@2a {
+ compatible = "ti,tmp421";
+ reg = <0x2a>;
+ };
+ tmp421@1c {
+ compatible = "ti,tmp421";
+ reg = <0x1c>;
+ };
+};
+
+&i2c2 {
+ status = "okay";
+};
+
+&i2c3 {
+ status = "okay";
+};
+
+&i2c4 {
+ status = "okay";
+};
+
+&i2c5 {
+ status = "okay";
+};
+
+&i2c6 {
+ status = "okay";
+
+ tmp421@1f {
+ compatible = "ti,tmp421";
+ reg = <0x1f>;
+ };
+ nvt210@4c {
+ compatible = "nvt210";
+ reg = <0x4c>;
+ };
+ eeprom@50 {
+ compatible = "atmel,24c128";
+ reg = <0x50>;
+ pagesize = <128>;
+ };
+};
+
+&i2c7 {
+ status = "okay";
+};
+
+&i2c8 {
+ status = "okay";
+
+ pca9641@70 {
+ compatible = "nxp,pca9641";
+ reg = <0x70>;
+ i2c-arb {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ eeprom@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ };
+ dps650ab@58 {
+ compatible = "dps650ab";
+ reg = <0x58>;
+ };
+ };
+ };
+};
+
+&i2c9 {
+ status = "okay";
+};
+
+&vuart {
+ status = "okay";
+};
+
+&gfx {
+ status = "okay";
+};
+
+&pinctrl {
+ aspeed,external-nodes = <&gfx &lhc>;
+};
+
+&gpio {
+ pin_gpio_c7 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(C, 7) GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "BIOS_SPI_MUX_S";
+ };
+ pin_gpio_d1 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(D, 1) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "PHY2_RESET_N";
+ };
+};