blob: fc0160e8ed334aa6dec86e97ba1193383e0eedef [file] [log] [blame]
# SPDX-License-Identifier: GPL-2.0-only
# The IOVA library may also be used by non-IOMMU_API users
config IOMMU_IOVA
tristate
# IOMMU_API always gets selected by whoever wants it.
config IOMMU_API
bool
menuconfig IOMMU_SUPPORT
bool "IOMMU Hardware Support"
depends on MMU
default y
---help---
Say Y here if you want to compile device drivers for IO Memory
Management Units into the kernel. These devices usually allow to
remap DMA requests and/or remap interrupts from other devices on the
system.
if IOMMU_SUPPORT
menu "Generic IOMMU Pagetable Support"
# Selected by the actual pagetable implementations
config IOMMU_IO_PGTABLE
bool
config IOMMU_IO_PGTABLE_LPAE
bool "ARMv7/v8 Long Descriptor Format"
select IOMMU_IO_PGTABLE
depends on ARM || ARM64 || (COMPILE_TEST && !GENERIC_ATOMIC64)
help
Enable support for the ARM long descriptor pagetable format.
This allocator supports 4K/2M/1G, 16K/32M and 64K/512M page
sizes at both stage-1 and stage-2, as well as address spaces
up to 48-bits in size.
config IOMMU_IO_PGTABLE_LPAE_SELFTEST
bool "LPAE selftests"
depends on IOMMU_IO_PGTABLE_LPAE
help
Enable self-tests for LPAE page table allocator. This performs
a series of page-table consistency checks during boot.
If unsure, say N here.
config IOMMU_IO_PGTABLE_ARMV7S
bool "ARMv7/v8 Short Descriptor Format"
select IOMMU_IO_PGTABLE
depends on ARM || ARM64 || COMPILE_TEST
help
Enable support for the ARM Short-descriptor pagetable format.
This supports 32-bit virtual and physical addresses mapped using
2-level tables with 4KB pages/1MB sections, and contiguous entries
for 64KB pages/16MB supersections if indicated by the IOMMU driver.
config IOMMU_IO_PGTABLE_ARMV7S_SELFTEST
bool "ARMv7s selftests"
depends on IOMMU_IO_PGTABLE_ARMV7S
help
Enable self-tests for ARMv7s page table allocator. This performs
a series of page-table consistency checks during boot.
If unsure, say N here.
endmenu
config IOMMU_DEBUGFS
bool "Export IOMMU internals in DebugFS"
depends on DEBUG_FS
help
Allows exposure of IOMMU device internals. This option enables
the use of debugfs by IOMMU drivers as required. Devices can,
at initialization time, cause the IOMMU code to create a top-level
debug/iommu directory, and then populate a subdirectory with
entries as required.
config IOMMU_DEFAULT_PASSTHROUGH
bool "IOMMU passthrough by default"
depends on IOMMU_API
help
Enable passthrough by default, removing the need to pass in
iommu.passthrough=on or iommu=pt through command line. If this
is enabled, you can still disable with iommu.passthrough=off
or iommu=nopt depending on the architecture.
If unsure, say N here.
config OF_IOMMU
def_bool y
depends on OF && IOMMU_API
# IOMMU-agnostic DMA-mapping layer
config IOMMU_DMA
bool
select IOMMU_API
select IOMMU_IOVA
select IRQ_MSI_IOMMU
select NEED_SG_DMA_LENGTH
config FSL_PAMU
bool "Freescale IOMMU support"
depends on PCI
depends on PHYS_64BIT
depends on PPC_E500MC || (COMPILE_TEST && PPC)
select IOMMU_API
select GENERIC_ALLOCATOR
help
Freescale PAMU support. PAMU is the IOMMU present on Freescale QorIQ platforms.
PAMU can authorize memory access, remap the memory address, and remap I/O
transaction types.
# MSM IOMMU support
config MSM_IOMMU
bool "MSM IOMMU Support"
depends on ARM
depends on ARCH_MSM8X60 || ARCH_MSM8960 || COMPILE_TEST
select IOMMU_API
select IOMMU_IO_PGTABLE_ARMV7S
help
Support for the IOMMUs found on certain Qualcomm SOCs.
These IOMMUs allow virtualization of the address space used by most
cores within the multimedia subsystem.
If unsure, say N here.
config IOMMU_PGTABLES_L2
def_bool y
depends on MSM_IOMMU && MMU && SMP && CPU_DCACHE_DISABLE=n
# AMD IOMMU support
config AMD_IOMMU
bool "AMD IOMMU support"
select SWIOTLB
select PCI_MSI
select PCI_ATS
select PCI_PRI
select PCI_PASID
select IOMMU_API
select IOMMU_IOVA
depends on X86_64 && PCI && ACPI && HAVE_CMPXCHG_DOUBLE
---help---
With this option you can enable support for AMD IOMMU hardware in
your system. An IOMMU is a hardware component which provides
remapping of DMA memory accesses from devices. With an AMD IOMMU you
can isolate the DMA memory of different devices and protect the
system from misbehaving device drivers or hardware.
You can find out if your system has an AMD IOMMU if you look into
your BIOS for an option to enable it or if you have an IVRS ACPI
table.
config AMD_IOMMU_V2
tristate "AMD IOMMU Version 2 driver"
depends on AMD_IOMMU
select MMU_NOTIFIER
---help---
This option enables support for the AMD IOMMUv2 features of the IOMMU
hardware. Select this option if you want to use devices that support
the PCI PRI and PASID interface.
config AMD_IOMMU_DEBUGFS
bool "Enable AMD IOMMU internals in DebugFS"
depends on AMD_IOMMU && IOMMU_DEBUGFS
---help---
!!!WARNING!!! !!!WARNING!!! !!!WARNING!!! !!!WARNING!!!
DO NOT ENABLE THIS OPTION UNLESS YOU REALLY, -REALLY- KNOW WHAT YOU ARE DOING!!!
Exposes AMD IOMMU device internals in DebugFS.
This option is -NOT- intended for production environments, and should
not generally be enabled.
# Intel IOMMU support
config DMAR_TABLE
bool
config INTEL_IOMMU
bool "Support for Intel IOMMU using DMA Remapping Devices"
depends on PCI_MSI && ACPI && (X86 || IA64)
select IOMMU_API
select IOMMU_IOVA
select NEED_DMA_MAP_STATE
select DMAR_TABLE
select SWIOTLB
help
DMA remapping (DMAR) devices support enables independent address
translations for Direct Memory Access (DMA) from devices.
These DMA remapping devices are reported via ACPI tables
and include PCI device scope covered by these DMA
remapping devices.
config INTEL_IOMMU_DEBUGFS
bool "Export Intel IOMMU internals in Debugfs"
depends on INTEL_IOMMU && IOMMU_DEBUGFS
help
!!!WARNING!!!
DO NOT ENABLE THIS OPTION UNLESS YOU REALLY KNOW WHAT YOU ARE DOING!!!
Expose Intel IOMMU internals in Debugfs.
This option is -NOT- intended for production environments, and should
only be enabled for debugging Intel IOMMU.
config INTEL_IOMMU_SVM
bool "Support for Shared Virtual Memory with Intel IOMMU"
depends on INTEL_IOMMU && X86_64
select PCI_PASID
select MMU_NOTIFIER
help
Shared Virtual Memory (SVM) provides a facility for devices
to access DMA resources through process address space by
means of a Process Address Space ID (PASID).
config INTEL_IOMMU_DEFAULT_ON
def_bool y
prompt "Enable Intel DMA Remapping Devices by default"
depends on INTEL_IOMMU
help
Selecting this option will enable a DMAR device at boot time if
one is found. If this option is not selected, DMAR support can
be enabled by passing intel_iommu=on to the kernel.
config INTEL_IOMMU_BROKEN_GFX_WA
bool "Workaround broken graphics drivers (going away soon)"
depends on INTEL_IOMMU && BROKEN && X86
---help---
Current Graphics drivers tend to use physical address
for DMA and avoid using DMA APIs. Setting this config
option permits the IOMMU driver to set a unity map for
all the OS-visible memory. Hence the driver can continue
to use physical addresses for DMA, at least until this
option is removed in the 2.6.32 kernel.
config INTEL_IOMMU_FLOPPY_WA
def_bool y
depends on INTEL_IOMMU && X86
---help---
Floppy disk drivers are known to bypass DMA API calls
thereby failing to work when IOMMU is enabled. This
workaround will setup a 1:1 mapping for the first
16MiB to make floppy (an ISA device) work.
config IRQ_REMAP
bool "Support for Interrupt Remapping"
depends on X86_64 && X86_IO_APIC && PCI_MSI && ACPI
select DMAR_TABLE
---help---
Supports Interrupt remapping for IO-APIC and MSI devices.
To use x2apic mode in the CPU's which support x2APIC enhancements or
to support platforms with CPU's having > 8 bit APIC ID, say Y.
# OMAP IOMMU support
config OMAP_IOMMU
bool "OMAP IOMMU Support"
depends on ARM && MMU
depends on ARCH_OMAP2PLUS || COMPILE_TEST
select IOMMU_API
---help---
The OMAP3 media platform drivers depend on iommu support,
if you need them say Y here.
config OMAP_IOMMU_DEBUG
bool "Export OMAP IOMMU internals in DebugFS"
depends on OMAP_IOMMU && DEBUG_FS
---help---
Select this to see extensive information about
the internal state of OMAP IOMMU in debugfs.
Say N unless you know you need this.
config ROCKCHIP_IOMMU
bool "Rockchip IOMMU Support"
depends on ARM || ARM64
depends on ARCH_ROCKCHIP || COMPILE_TEST
select IOMMU_API
select ARM_DMA_USE_IOMMU
help
Support for IOMMUs found on Rockchip rk32xx SOCs.
These IOMMUs allow virtualization of the address space used by most
cores within the multimedia subsystem.
Say Y here if you are using a Rockchip SoC that includes an IOMMU
device.
config TEGRA_IOMMU_GART
bool "Tegra GART IOMMU Support"
depends on ARCH_TEGRA_2x_SOC
depends on TEGRA_MC
select IOMMU_API
help
Enables support for remapping discontiguous physical memory
shared with the operating system into contiguous I/O virtual
space through the GART (Graphics Address Relocation Table)
hardware included on Tegra SoCs.
config TEGRA_IOMMU_SMMU
bool "NVIDIA Tegra SMMU Support"
depends on ARCH_TEGRA
depends on TEGRA_AHB
depends on TEGRA_MC
select IOMMU_API
help
This driver supports the IOMMU hardware (SMMU) found on NVIDIA Tegra
SoCs (Tegra30 up to Tegra210).
config EXYNOS_IOMMU
bool "Exynos IOMMU Support"
depends on ARCH_EXYNOS && MMU
depends on !CPU_BIG_ENDIAN # revisit driver if we can enable big-endian ptes
select IOMMU_API
select ARM_DMA_USE_IOMMU
help
Support for the IOMMU (System MMU) of Samsung Exynos application
processor family. This enables H/W multimedia accelerators to see
non-linear physical memory chunks as linear memory in their
address space.
If unsure, say N here.
config EXYNOS_IOMMU_DEBUG
bool "Debugging log for Exynos IOMMU"
depends on EXYNOS_IOMMU
help
Select this to see the detailed log message that shows what
happens in the IOMMU driver.
Say N unless you need kernel log message for IOMMU debugging.
config IPMMU_VMSA
bool "Renesas VMSA-compatible IPMMU"
depends on ARM || IOMMU_DMA
depends on ARCH_RENESAS || (COMPILE_TEST && !GENERIC_ATOMIC64)
select IOMMU_API
select IOMMU_IO_PGTABLE_LPAE
select ARM_DMA_USE_IOMMU
help
Support for the Renesas VMSA-compatible IPMMU found in the R-Mobile
APE6, R-Car Gen2, and R-Car Gen3 SoCs.
If unsure, say N.
config SPAPR_TCE_IOMMU
bool "sPAPR TCE IOMMU Support"
depends on PPC_POWERNV || PPC_PSERIES
select IOMMU_API
help
Enables bits of IOMMU API required by VFIO. The iommu_ops
is not implemented as it is not necessary for VFIO.
# ARM IOMMU support
config ARM_SMMU
bool "ARM Ltd. System MMU (SMMU) Support"
depends on (ARM64 || ARM) && MMU
select IOMMU_API
select IOMMU_IO_PGTABLE_LPAE
select ARM_DMA_USE_IOMMU if ARM
help
Support for implementations of the ARM System MMU architecture
versions 1 and 2.
Say Y here if your SoC includes an IOMMU device implementing
the ARM SMMU architecture.
config ARM_SMMU_DISABLE_BYPASS_BY_DEFAULT
bool "Default to disabling bypass on ARM SMMU v1 and v2"
depends on ARM_SMMU
default y
help
Say Y here to (by default) disable bypass streams such that
incoming transactions from devices that are not attached to
an iommu domain will report an abort back to the device and
will not be allowed to pass through the SMMU.
Any old kernels that existed before this KConfig was
introduced would default to _allowing_ bypass (AKA the
equivalent of NO for this config). However the default for
this option is YES because the old behavior is insecure.
There are few reasons to allow unmatched stream bypass, and
even fewer good ones. If saying YES here breaks your board
you should work on fixing your board. This KConfig option
is expected to be removed in the future and we'll simply
hardcode the bypass disable in the code.
NOTE: the kernel command line parameter
'arm-smmu.disable_bypass' will continue to override this
config.
config ARM_SMMU_V3
bool "ARM Ltd. System MMU Version 3 (SMMUv3) Support"
depends on ARM64
select IOMMU_API
select IOMMU_IO_PGTABLE_LPAE
select GENERIC_MSI_IRQ_DOMAIN
help
Support for implementations of the ARM System MMU architecture
version 3 providing translation support to a PCIe root complex.
Say Y here if your system includes an IOMMU device implementing
the ARM SMMUv3 architecture.
config S390_IOMMU
def_bool y if S390 && PCI
depends on S390 && PCI
select IOMMU_API
help
Support for the IOMMU API for s390 PCI devices.
config S390_CCW_IOMMU
bool "S390 CCW IOMMU Support"
depends on S390 && CCW
select IOMMU_API
help
Enables bits of IOMMU API required by VFIO. The iommu_ops
is not implemented as it is not necessary for VFIO.
config S390_AP_IOMMU
bool "S390 AP IOMMU Support"
depends on S390 && ZCRYPT
select IOMMU_API
help
Enables bits of IOMMU API required by VFIO. The iommu_ops
is not implemented as it is not necessary for VFIO.
config MTK_IOMMU
bool "MTK IOMMU Support"
depends on ARM || ARM64
depends on ARCH_MEDIATEK || COMPILE_TEST
select ARM_DMA_USE_IOMMU
select IOMMU_API
select IOMMU_DMA
select IOMMU_IO_PGTABLE_ARMV7S
select MEMORY
select MTK_SMI
help
Support for the M4U on certain Mediatek SOCs. M4U is MultiMedia
Memory Management Unit. This option enables remapping of DMA memory
accesses for the multimedia subsystem.
If unsure, say N here.
config MTK_IOMMU_V1
bool "MTK IOMMU Version 1 (M4U gen1) Support"
depends on ARM
depends on ARCH_MEDIATEK || COMPILE_TEST
select ARM_DMA_USE_IOMMU
select IOMMU_API
select MEMORY
select MTK_SMI
help
Support for the M4U on certain Mediatek SoCs. M4U generation 1 HW is
Multimedia Memory Managememt Unit. This option enables remapping of
DMA memory accesses for the multimedia subsystem.
if unsure, say N here.
config QCOM_IOMMU
# Note: iommu drivers cannot (yet?) be built as modules
bool "Qualcomm IOMMU Support"
depends on ARCH_QCOM || (COMPILE_TEST && !GENERIC_ATOMIC64)
select IOMMU_API
select IOMMU_IO_PGTABLE_LPAE
select ARM_DMA_USE_IOMMU
help
Support for IOMMU on certain Qualcomm SoCs.
config HYPERV_IOMMU
bool "Hyper-V x2APIC IRQ Handling"
depends on HYPERV
select IOMMU_API
default HYPERV
help
Stub IOMMU driver to handle IRQs as to allow Hyper-V Linux
guests to run with x2APIC mode enabled.
config VIRTIO_IOMMU
bool "Virtio IOMMU driver"
depends on VIRTIO=y
depends on ARM64
select IOMMU_API
select INTERVAL_TREE
help
Para-virtualised IOMMU driver with virtio.
Say Y here if you intend to run this kernel as a guest.
endif # IOMMU_SUPPORT