[SCSI] replace __FUNCTION__ with __func__
[jejb: fixed up a ton of missed conversions.
All of you are on notice this has happened, driver trees will now
need to be rebased]
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Cc: SCSI List <linux-scsi@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c
index 744f06d..48ee8c7 100644
--- a/drivers/scsi/libsas/sas_ata.c
+++ b/drivers/scsi/libsas/sas_ata.c
@@ -74,7 +74,7 @@
case SAS_OPEN_TO:
case SAS_OPEN_REJECT:
SAS_DPRINTK("%s: Saw error %d. What to do?\n",
- __FUNCTION__, ts->stat);
+ __func__, ts->stat);
return AC_ERR_OTHER;
case SAS_ABORTED_TASK:
@@ -115,7 +115,7 @@
} else if (stat->stat != SAM_STAT_GOOD) {
ac = sas_to_ata_err(stat);
if (ac) {
- SAS_DPRINTK("%s: SAS error %x\n", __FUNCTION__,
+ SAS_DPRINTK("%s: SAS error %x\n", __func__,
stat->stat);
/* We saw a SAS error. Send a vague error. */
qc->err_mask = ac;
@@ -244,20 +244,20 @@
res = i->dft->lldd_I_T_nexus_reset(dev);
if (res != TMF_RESP_FUNC_COMPLETE)
- SAS_DPRINTK("%s: Unable to reset I T nexus?\n", __FUNCTION__);
+ SAS_DPRINTK("%s: Unable to reset I T nexus?\n", __func__);
switch (dev->sata_dev.command_set) {
case ATA_COMMAND_SET:
- SAS_DPRINTK("%s: Found ATA device.\n", __FUNCTION__);
+ SAS_DPRINTK("%s: Found ATA device.\n", __func__);
ap->link.device[0].class = ATA_DEV_ATA;
break;
case ATAPI_COMMAND_SET:
- SAS_DPRINTK("%s: Found ATAPI device.\n", __FUNCTION__);
+ SAS_DPRINTK("%s: Found ATAPI device.\n", __func__);
ap->link.device[0].class = ATA_DEV_ATAPI;
break;
default:
SAS_DPRINTK("%s: Unknown SATA command set: %d.\n",
- __FUNCTION__,
+ __func__,
dev->sata_dev.command_set);
ap->link.device[0].class = ATA_DEV_UNKNOWN;
break;
@@ -299,7 +299,7 @@
{
struct domain_device *dev = ap->private_data;
- SAS_DPRINTK("STUB %s\n", __FUNCTION__);
+ SAS_DPRINTK("STUB %s\n", __func__);
switch (sc_reg_in) {
case SCR_STATUS:
dev->sata_dev.sstatus = val;
@@ -324,7 +324,7 @@
{
struct domain_device *dev = ap->private_data;
- SAS_DPRINTK("STUB %s\n", __FUNCTION__);
+ SAS_DPRINTK("STUB %s\n", __func__);
switch (sc_reg_in) {
case SCR_STATUS:
*val = dev->sata_dev.sstatus;
diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c
index aefd865..3da02e4 100644
--- a/drivers/scsi/libsas/sas_expander.c
+++ b/drivers/scsi/libsas/sas_expander.c
@@ -121,7 +121,7 @@
break;
} else {
SAS_DPRINTK("%s: task to dev %016llx response: 0x%x "
- "status 0x%x\n", __FUNCTION__,
+ "status 0x%x\n", __func__,
SAS_ADDR(dev->sas_addr),
task->task_status.resp,
task->task_status.stat);
@@ -1279,7 +1279,7 @@
goto out;
} else if (res != SMP_RESP_FUNC_ACC) {
SAS_DPRINTK("%s: dev %016llx phy 0x%x index 0x%x "
- "result 0x%x\n", __FUNCTION__,
+ "result 0x%x\n", __func__,
SAS_ADDR(dev->sas_addr), phy_id, i, res);
goto out;
}
@@ -1901,7 +1901,7 @@
if (!rsp) {
printk("%s: space for a smp response is missing\n",
- __FUNCTION__);
+ __func__);
return -EINVAL;
}
@@ -1914,20 +1914,20 @@
if (type != SAS_EDGE_EXPANDER_DEVICE &&
type != SAS_FANOUT_EXPANDER_DEVICE) {
printk("%s: can we send a smp request to a device?\n",
- __FUNCTION__);
+ __func__);
return -EINVAL;
}
dev = sas_find_dev_by_rphy(rphy);
if (!dev) {
- printk("%s: fail to find a domain_device?\n", __FUNCTION__);
+ printk("%s: fail to find a domain_device?\n", __func__);
return -EINVAL;
}
/* do we need to support multiple segments? */
if (req->bio->bi_vcnt > 1 || rsp->bio->bi_vcnt > 1) {
printk("%s: multiple segments req %u %u, rsp %u %u\n",
- __FUNCTION__, req->bio->bi_vcnt, req->data_len,
+ __func__, req->bio->bi_vcnt, req->data_len,
rsp->bio->bi_vcnt, rsp->data_len);
return -EINVAL;
}
diff --git a/drivers/scsi/libsas/sas_port.c b/drivers/scsi/libsas/sas_port.c
index 39ae68a..139935a 100644
--- a/drivers/scsi/libsas/sas_port.c
+++ b/drivers/scsi/libsas/sas_port.c
@@ -50,7 +50,7 @@
sas_deform_port(phy);
else {
SAS_DPRINTK("%s: phy%d belongs to port%d already(%d)!\n",
- __FUNCTION__, phy->id, phy->port->id,
+ __func__, phy->id, phy->port->id,
phy->port->num_phys);
return;
}
@@ -78,7 +78,7 @@
if (i >= sas_ha->num_phys) {
printk(KERN_NOTICE "%s: couldn't find a free port, bug?\n",
- __FUNCTION__);
+ __func__);
spin_unlock_irqrestore(&sas_ha->phy_port_lock, flags);
return;
}
diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c
index 601ec5b..a8e3ef3 100644
--- a/drivers/scsi/libsas/sas_scsi_host.c
+++ b/drivers/scsi/libsas/sas_scsi_host.c
@@ -343,7 +343,7 @@
flags);
SAS_DPRINTK("%s: task 0x%p aborted from "
"task_queue\n",
- __FUNCTION__, task);
+ __func__, task);
return TASK_IS_ABORTED;
}
}
@@ -351,13 +351,13 @@
}
for (i = 0; i < 5; i++) {
- SAS_DPRINTK("%s: aborting task 0x%p\n", __FUNCTION__, task);
+ SAS_DPRINTK("%s: aborting task 0x%p\n", __func__, task);
res = si->dft->lldd_abort_task(task);
spin_lock_irqsave(&task->task_state_lock, flags);
if (task->task_state_flags & SAS_TASK_STATE_DONE) {
spin_unlock_irqrestore(&task->task_state_lock, flags);
- SAS_DPRINTK("%s: task 0x%p is done\n", __FUNCTION__,
+ SAS_DPRINTK("%s: task 0x%p is done\n", __func__,
task);
return TASK_IS_DONE;
}
@@ -365,24 +365,24 @@
if (res == TMF_RESP_FUNC_COMPLETE) {
SAS_DPRINTK("%s: task 0x%p is aborted\n",
- __FUNCTION__, task);
+ __func__, task);
return TASK_IS_ABORTED;
} else if (si->dft->lldd_query_task) {
SAS_DPRINTK("%s: querying task 0x%p\n",
- __FUNCTION__, task);
+ __func__, task);
res = si->dft->lldd_query_task(task);
switch (res) {
case TMF_RESP_FUNC_SUCC:
SAS_DPRINTK("%s: task 0x%p at LU\n",
- __FUNCTION__, task);
+ __func__, task);
return TASK_IS_AT_LU;
case TMF_RESP_FUNC_COMPLETE:
SAS_DPRINTK("%s: task 0x%p not at LU\n",
- __FUNCTION__, task);
+ __func__, task);
return TASK_IS_NOT_AT_LU;
case TMF_RESP_FUNC_FAILED:
SAS_DPRINTK("%s: task 0x%p failed to abort\n",
- __FUNCTION__, task);
+ __func__, task);
return TASK_ABORT_FAILED;
}
@@ -545,7 +545,7 @@
if (need_reset) {
SAS_DPRINTK("%s: task 0x%p requests reset\n",
- __FUNCTION__, task);
+ __func__, task);
goto reset;
}
@@ -556,13 +556,13 @@
switch (res) {
case TASK_IS_DONE:
- SAS_DPRINTK("%s: task 0x%p is done\n", __FUNCTION__,
+ SAS_DPRINTK("%s: task 0x%p is done\n", __func__,
task);
sas_eh_finish_cmd(cmd);
continue;
case TASK_IS_ABORTED:
SAS_DPRINTK("%s: task 0x%p is aborted\n",
- __FUNCTION__, task);
+ __func__, task);
sas_eh_finish_cmd(cmd);
continue;
case TASK_IS_AT_LU:
@@ -633,7 +633,7 @@
}
return list_empty(work_q);
clear_q:
- SAS_DPRINTK("--- Exit %s -- clear_q\n", __FUNCTION__);
+ SAS_DPRINTK("--- Exit %s -- clear_q\n", __func__);
list_for_each_entry_safe(cmd, n, work_q, eh_entry)
sas_eh_finish_cmd(cmd);
@@ -650,7 +650,7 @@
list_splice_init(&shost->eh_cmd_q, &eh_work_q);
spin_unlock_irqrestore(shost->host_lock, flags);
- SAS_DPRINTK("Enter %s\n", __FUNCTION__);
+ SAS_DPRINTK("Enter %s\n", __func__);
/*
* Deal with commands that still have SAS tasks (i.e. they didn't
* complete via the normal sas_task completion mechanism)
@@ -669,7 +669,7 @@
out:
scsi_eh_flush_done_q(&ha->eh_done_q);
- SAS_DPRINTK("--- Exit %s\n", __FUNCTION__);
+ SAS_DPRINTK("--- Exit %s\n", __func__);
return;
}
@@ -990,7 +990,7 @@
if (task->task_state_flags & SAS_TASK_STATE_ABORTED ||
task->task_state_flags & SAS_TASK_STATE_DONE) {
spin_unlock_irqrestore(&task->task_state_lock, flags);
- SAS_DPRINTK("%s: Task %p already finished.\n", __FUNCTION__,
+ SAS_DPRINTK("%s: Task %p already finished.\n", __func__,
task);
return 0;
}