| /* |
| * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. |
| * |
| * Freescale DIU Frame Buffer device driver |
| * |
| * Authors: Hongjun Chen <hong-jun.chen@freescale.com> |
| * Paul Widmer <paul.widmer@freescale.com> |
| * Srikanth Srinivasan <srikanth.srinivasan@freescale.com> |
| * York Sun <yorksun@freescale.com> |
| * |
| * Based on imxfb.c Copyright (C) 2004 S.Hauer, Pengutronix |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| * |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/errno.h> |
| #include <linux/string.h> |
| #include <linux/slab.h> |
| #include <linux/fb.h> |
| #include <linux/init.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/platform_device.h> |
| #include <linux/interrupt.h> |
| #include <linux/clk.h> |
| #include <linux/uaccess.h> |
| #include <linux/vmalloc.h> |
| |
| #include <linux/of_platform.h> |
| |
| #include <sysdev/fsl_soc.h> |
| #include "fsl-diu-fb.h" |
| |
| /* |
| * These parameters give default parameters |
| * for video output 1024x768, |
| * FIXME - change timing to proper amounts |
| * hsync 31.5kHz, vsync 60Hz |
| */ |
| static struct fb_videomode __devinitdata fsl_diu_default_mode = { |
| .refresh = 60, |
| .xres = 1024, |
| .yres = 768, |
| .pixclock = 15385, |
| .left_margin = 160, |
| .right_margin = 24, |
| .upper_margin = 29, |
| .lower_margin = 3, |
| .hsync_len = 136, |
| .vsync_len = 6, |
| .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, |
| .vmode = FB_VMODE_NONINTERLACED |
| }; |
| |
| static struct fb_videomode __devinitdata fsl_diu_mode_db[] = { |
| { |
| .name = "1024x768-60", |
| .refresh = 60, |
| .xres = 1024, |
| .yres = 768, |
| .pixclock = 15385, |
| .left_margin = 160, |
| .right_margin = 24, |
| .upper_margin = 29, |
| .lower_margin = 3, |
| .hsync_len = 136, |
| .vsync_len = 6, |
| .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, |
| .vmode = FB_VMODE_NONINTERLACED |
| }, |
| { |
| .name = "1024x768-70", |
| .refresh = 70, |
| .xres = 1024, |
| .yres = 768, |
| .pixclock = 16886, |
| .left_margin = 3, |
| .right_margin = 3, |
| .upper_margin = 2, |
| .lower_margin = 2, |
| .hsync_len = 40, |
| .vsync_len = 18, |
| .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, |
| .vmode = FB_VMODE_NONINTERLACED |
| }, |
| { |
| .name = "1024x768-75", |
| .refresh = 75, |
| .xres = 1024, |
| .yres = 768, |
| .pixclock = 15009, |
| .left_margin = 3, |
| .right_margin = 3, |
| .upper_margin = 2, |
| .lower_margin = 2, |
| .hsync_len = 80, |
| .vsync_len = 32, |
| .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, |
| .vmode = FB_VMODE_NONINTERLACED |
| }, |
| { |
| .name = "1280x1024-60", |
| .refresh = 60, |
| .xres = 1280, |
| .yres = 1024, |
| .pixclock = 9375, |
| .left_margin = 38, |
| .right_margin = 128, |
| .upper_margin = 2, |
| .lower_margin = 7, |
| .hsync_len = 216, |
| .vsync_len = 37, |
| .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, |
| .vmode = FB_VMODE_NONINTERLACED |
| }, |
| { |
| .name = "1280x1024-70", |
| .refresh = 70, |
| .xres = 1280, |
| .yres = 1024, |
| .pixclock = 9380, |
| .left_margin = 6, |
| .right_margin = 6, |
| .upper_margin = 4, |
| .lower_margin = 4, |
| .hsync_len = 60, |
| .vsync_len = 94, |
| .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, |
| .vmode = FB_VMODE_NONINTERLACED |
| }, |
| { |
| .name = "1280x1024-75", |
| .refresh = 75, |
| .xres = 1280, |
| .yres = 1024, |
| .pixclock = 9380, |
| .left_margin = 6, |
| .right_margin = 6, |
| .upper_margin = 4, |
| .lower_margin = 4, |
| .hsync_len = 60, |
| .vsync_len = 15, |
| .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, |
| .vmode = FB_VMODE_NONINTERLACED |
| }, |
| { |
| .name = "320x240", /* for AOI only */ |
| .refresh = 60, |
| .xres = 320, |
| .yres = 240, |
| .pixclock = 15385, |
| .left_margin = 0, |
| .right_margin = 0, |
| .upper_margin = 0, |
| .lower_margin = 0, |
| .hsync_len = 0, |
| .vsync_len = 0, |
| .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, |
| .vmode = FB_VMODE_NONINTERLACED |
| }, |
| { |
| .name = "1280x480-60", |
| .refresh = 60, |
| .xres = 1280, |
| .yres = 480, |
| .pixclock = 18939, |
| .left_margin = 353, |
| .right_margin = 47, |
| .upper_margin = 39, |
| .lower_margin = 4, |
| .hsync_len = 8, |
| .vsync_len = 2, |
| .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, |
| .vmode = FB_VMODE_NONINTERLACED |
| }, |
| }; |
| |
| static char *fb_mode = "1024x768-32@60"; |
| static unsigned long default_bpp = 32; |
| static int monitor_port; |
| |
| #if defined(CONFIG_NOT_COHERENT_CACHE) |
| static u8 *coherence_data; |
| static size_t coherence_data_size; |
| static unsigned int d_cache_line_size; |
| #endif |
| |
| static DEFINE_SPINLOCK(diu_lock); |
| |
| struct fsl_diu_data { |
| struct fb_info *fsl_diu_info[FSL_AOI_NUM - 1]; |
| /*FSL_AOI_NUM has one dummy AOI */ |
| struct device_attribute dev_attr; |
| struct diu_ad *dummy_ad; |
| void *dummy_aoi_virt; |
| unsigned int irq; |
| int fb_enabled; |
| int monitor_port; |
| }; |
| |
| struct mfb_info { |
| int index; |
| int type; |
| char *id; |
| int registered; |
| int blank; |
| unsigned long pseudo_palette[16]; |
| struct diu_ad *ad; |
| int cursor_reset; |
| unsigned char g_alpha; |
| unsigned int count; |
| int x_aoi_d; /* aoi display x offset to physical screen */ |
| int y_aoi_d; /* aoi display y offset to physical screen */ |
| struct fsl_diu_data *parent; |
| }; |
| |
| |
| static struct mfb_info mfb_template[] = { |
| { /* AOI 0 for plane 0 */ |
| .index = 0, |
| .type = MFB_TYPE_OUTPUT, |
| .id = "Panel0", |
| .registered = 0, |
| .count = 0, |
| .x_aoi_d = 0, |
| .y_aoi_d = 0, |
| }, |
| { /* AOI 0 for plane 1 */ |
| .index = 1, |
| .type = MFB_TYPE_OUTPUT, |
| .id = "Panel1 AOI0", |
| .registered = 0, |
| .g_alpha = 0xff, |
| .count = 0, |
| .x_aoi_d = 0, |
| .y_aoi_d = 0, |
| }, |
| { /* AOI 1 for plane 1 */ |
| .index = 2, |
| .type = MFB_TYPE_OUTPUT, |
| .id = "Panel1 AOI1", |
| .registered = 0, |
| .g_alpha = 0xff, |
| .count = 0, |
| .x_aoi_d = 0, |
| .y_aoi_d = 480, |
| }, |
| { /* AOI 0 for plane 2 */ |
| .index = 3, |
| .type = MFB_TYPE_OUTPUT, |
| .id = "Panel2 AOI0", |
| .registered = 0, |
| .g_alpha = 0xff, |
| .count = 0, |
| .x_aoi_d = 640, |
| .y_aoi_d = 0, |
| }, |
| { /* AOI 1 for plane 2 */ |
| .index = 4, |
| .type = MFB_TYPE_OUTPUT, |
| .id = "Panel2 AOI1", |
| .registered = 0, |
| .g_alpha = 0xff, |
| .count = 0, |
| .x_aoi_d = 640, |
| .y_aoi_d = 480, |
| }, |
| }; |
| |
| static struct diu_hw dr = { |
| .mode = MFB_MODE1, |
| .reg_lock = __SPIN_LOCK_UNLOCKED(diu_hw.reg_lock), |
| }; |
| |
| static struct diu_pool pool; |
| |
| /** |
| * fsl_diu_alloc - allocate memory for the DIU |
| * @size: number of bytes to allocate |
| * @param: returned physical address of memory |
| * |
| * This function allocates a physically-contiguous block of memory. |
| */ |
| static void *fsl_diu_alloc(size_t size, phys_addr_t *phys) |
| { |
| void *virt; |
| |
| pr_debug("size=%zu\n", size); |
| |
| virt = alloc_pages_exact(size, GFP_DMA | __GFP_ZERO); |
| if (virt) { |
| *phys = virt_to_phys(virt); |
| pr_debug("virt=%p phys=%llx\n", virt, |
| (unsigned long long)*phys); |
| } |
| |
| return virt; |
| } |
| |
| /** |
| * fsl_diu_free - release DIU memory |
| * @virt: pointer returned by fsl_diu_alloc() |
| * @size: number of bytes allocated by fsl_diu_alloc() |
| * |
| * This function releases memory allocated by fsl_diu_alloc(). |
| */ |
| static void fsl_diu_free(void *virt, size_t size) |
| { |
| pr_debug("virt=%p size=%zu\n", virt, size); |
| |
| if (virt && size) |
| free_pages_exact(virt, size); |
| } |
| |
| static int fsl_diu_enable_panel(struct fb_info *info) |
| { |
| struct mfb_info *pmfbi, *cmfbi, *mfbi = info->par; |
| struct diu *hw = dr.diu_reg; |
| struct diu_ad *ad = mfbi->ad; |
| struct fsl_diu_data *machine_data = mfbi->parent; |
| int res = 0; |
| |
| pr_debug("enable_panel index %d\n", mfbi->index); |
| if (mfbi->type != MFB_TYPE_OFF) { |
| switch (mfbi->index) { |
| case 0: /* plane 0 */ |
| if (hw->desc[0] != ad->paddr) |
| out_be32(&hw->desc[0], ad->paddr); |
| break; |
| case 1: /* plane 1 AOI 0 */ |
| cmfbi = machine_data->fsl_diu_info[2]->par; |
| if (hw->desc[1] != ad->paddr) { /* AOI0 closed */ |
| if (cmfbi->count > 0) /* AOI1 open */ |
| ad->next_ad = |
| cpu_to_le32(cmfbi->ad->paddr); |
| else |
| ad->next_ad = 0; |
| out_be32(&hw->desc[1], ad->paddr); |
| } |
| break; |
| case 3: /* plane 2 AOI 0 */ |
| cmfbi = machine_data->fsl_diu_info[4]->par; |
| if (hw->desc[2] != ad->paddr) { /* AOI0 closed */ |
| if (cmfbi->count > 0) /* AOI1 open */ |
| ad->next_ad = |
| cpu_to_le32(cmfbi->ad->paddr); |
| else |
| ad->next_ad = 0; |
| out_be32(&hw->desc[2], ad->paddr); |
| } |
| break; |
| case 2: /* plane 1 AOI 1 */ |
| pmfbi = machine_data->fsl_diu_info[1]->par; |
| ad->next_ad = 0; |
| if (hw->desc[1] == machine_data->dummy_ad->paddr) |
| out_be32(&hw->desc[1], ad->paddr); |
| else /* AOI0 open */ |
| pmfbi->ad->next_ad = cpu_to_le32(ad->paddr); |
| break; |
| case 4: /* plane 2 AOI 1 */ |
| pmfbi = machine_data->fsl_diu_info[3]->par; |
| ad->next_ad = 0; |
| if (hw->desc[2] == machine_data->dummy_ad->paddr) |
| out_be32(&hw->desc[2], ad->paddr); |
| else /* AOI0 was open */ |
| pmfbi->ad->next_ad = cpu_to_le32(ad->paddr); |
| break; |
| default: |
| res = -EINVAL; |
| break; |
| } |
| } else |
| res = -EINVAL; |
| return res; |
| } |
| |
| static int fsl_diu_disable_panel(struct fb_info *info) |
| { |
| struct mfb_info *pmfbi, *cmfbi, *mfbi = info->par; |
| struct diu *hw = dr.diu_reg; |
| struct diu_ad *ad = mfbi->ad; |
| struct fsl_diu_data *machine_data = mfbi->parent; |
| int res = 0; |
| |
| switch (mfbi->index) { |
| case 0: /* plane 0 */ |
| if (hw->desc[0] != machine_data->dummy_ad->paddr) |
| out_be32(&hw->desc[0], |
| machine_data->dummy_ad->paddr); |
| break; |
| case 1: /* plane 1 AOI 0 */ |
| cmfbi = machine_data->fsl_diu_info[2]->par; |
| if (cmfbi->count > 0) /* AOI1 is open */ |
| out_be32(&hw->desc[1], cmfbi->ad->paddr); |
| /* move AOI1 to the first */ |
| else /* AOI1 was closed */ |
| out_be32(&hw->desc[1], |
| machine_data->dummy_ad->paddr); |
| /* close AOI 0 */ |
| break; |
| case 3: /* plane 2 AOI 0 */ |
| cmfbi = machine_data->fsl_diu_info[4]->par; |
| if (cmfbi->count > 0) /* AOI1 is open */ |
| out_be32(&hw->desc[2], cmfbi->ad->paddr); |
| /* move AOI1 to the first */ |
| else /* AOI1 was closed */ |
| out_be32(&hw->desc[2], |
| machine_data->dummy_ad->paddr); |
| /* close AOI 0 */ |
| break; |
| case 2: /* plane 1 AOI 1 */ |
| pmfbi = machine_data->fsl_diu_info[1]->par; |
| if (hw->desc[1] != ad->paddr) { |
| /* AOI1 is not the first in the chain */ |
| if (pmfbi->count > 0) |
| /* AOI0 is open, must be the first */ |
| pmfbi->ad->next_ad = 0; |
| } else /* AOI1 is the first in the chain */ |
| out_be32(&hw->desc[1], machine_data->dummy_ad->paddr); |
| /* close AOI 1 */ |
| break; |
| case 4: /* plane 2 AOI 1 */ |
| pmfbi = machine_data->fsl_diu_info[3]->par; |
| if (hw->desc[2] != ad->paddr) { |
| /* AOI1 is not the first in the chain */ |
| if (pmfbi->count > 0) |
| /* AOI0 is open, must be the first */ |
| pmfbi->ad->next_ad = 0; |
| } else /* AOI1 is the first in the chain */ |
| out_be32(&hw->desc[2], machine_data->dummy_ad->paddr); |
| /* close AOI 1 */ |
| break; |
| default: |
| res = -EINVAL; |
| break; |
| } |
| |
| return res; |
| } |
| |
| static void enable_lcdc(struct fb_info *info) |
| { |
| struct diu *hw = dr.diu_reg; |
| struct mfb_info *mfbi = info->par; |
| struct fsl_diu_data *machine_data = mfbi->parent; |
| |
| if (!machine_data->fb_enabled) { |
| out_be32(&hw->diu_mode, dr.mode); |
| machine_data->fb_enabled++; |
| } |
| } |
| |
| static void disable_lcdc(struct fb_info *info) |
| { |
| struct diu *hw = dr.diu_reg; |
| struct mfb_info *mfbi = info->par; |
| struct fsl_diu_data *machine_data = mfbi->parent; |
| |
| if (machine_data->fb_enabled) { |
| out_be32(&hw->diu_mode, 0); |
| machine_data->fb_enabled = 0; |
| } |
| } |
| |
| static void adjust_aoi_size_position(struct fb_var_screeninfo *var, |
| struct fb_info *info) |
| { |
| struct mfb_info *lower_aoi_mfbi, *upper_aoi_mfbi, *mfbi = info->par; |
| struct fsl_diu_data *machine_data = mfbi->parent; |
| int available_height, upper_aoi_bottom, index = mfbi->index; |
| int lower_aoi_is_open, upper_aoi_is_open; |
| __u32 base_plane_width, base_plane_height, upper_aoi_height; |
| |
| base_plane_width = machine_data->fsl_diu_info[0]->var.xres; |
| base_plane_height = machine_data->fsl_diu_info[0]->var.yres; |
| |
| if (mfbi->x_aoi_d < 0) |
| mfbi->x_aoi_d = 0; |
| if (mfbi->y_aoi_d < 0) |
| mfbi->y_aoi_d = 0; |
| switch (index) { |
| case 0: |
| if (mfbi->x_aoi_d != 0) |
| mfbi->x_aoi_d = 0; |
| if (mfbi->y_aoi_d != 0) |
| mfbi->y_aoi_d = 0; |
| break; |
| case 1: /* AOI 0 */ |
| case 3: |
| lower_aoi_mfbi = machine_data->fsl_diu_info[index+1]->par; |
| lower_aoi_is_open = lower_aoi_mfbi->count > 0 ? 1 : 0; |
| if (var->xres > base_plane_width) |
| var->xres = base_plane_width; |
| if ((mfbi->x_aoi_d + var->xres) > base_plane_width) |
| mfbi->x_aoi_d = base_plane_width - var->xres; |
| |
| if (lower_aoi_is_open) |
| available_height = lower_aoi_mfbi->y_aoi_d; |
| else |
| available_height = base_plane_height; |
| if (var->yres > available_height) |
| var->yres = available_height; |
| if ((mfbi->y_aoi_d + var->yres) > available_height) |
| mfbi->y_aoi_d = available_height - var->yres; |
| break; |
| case 2: /* AOI 1 */ |
| case 4: |
| upper_aoi_mfbi = machine_data->fsl_diu_info[index-1]->par; |
| upper_aoi_height = |
| machine_data->fsl_diu_info[index-1]->var.yres; |
| upper_aoi_bottom = upper_aoi_mfbi->y_aoi_d + upper_aoi_height; |
| upper_aoi_is_open = upper_aoi_mfbi->count > 0 ? 1 : 0; |
| if (var->xres > base_plane_width) |
| var->xres = base_plane_width; |
| if ((mfbi->x_aoi_d + var->xres) > base_plane_width) |
| mfbi->x_aoi_d = base_plane_width - var->xres; |
| if (mfbi->y_aoi_d < 0) |
| mfbi->y_aoi_d = 0; |
| if (upper_aoi_is_open) { |
| if (mfbi->y_aoi_d < upper_aoi_bottom) |
| mfbi->y_aoi_d = upper_aoi_bottom; |
| available_height = base_plane_height |
| - upper_aoi_bottom; |
| } else |
| available_height = base_plane_height; |
| if (var->yres > available_height) |
| var->yres = available_height; |
| if ((mfbi->y_aoi_d + var->yres) > base_plane_height) |
| mfbi->y_aoi_d = base_plane_height - var->yres; |
| break; |
| } |
| } |
| /* |
| * Checks to see if the hardware supports the state requested by var passed |
| * in. This function does not alter the hardware state! If the var passed in |
| * is slightly off by what the hardware can support then we alter the var |
| * PASSED in to what we can do. If the hardware doesn't support mode change |
| * a -EINVAL will be returned by the upper layers. |
| */ |
| static int fsl_diu_check_var(struct fb_var_screeninfo *var, |
| struct fb_info *info) |
| { |
| unsigned long htotal, vtotal; |
| |
| pr_debug("check_var xres: %d\n", var->xres); |
| pr_debug("check_var yres: %d\n", var->yres); |
| |
| if (var->xres_virtual < var->xres) |
| var->xres_virtual = var->xres; |
| if (var->yres_virtual < var->yres) |
| var->yres_virtual = var->yres; |
| |
| if (var->xoffset < 0) |
| var->xoffset = 0; |
| |
| if (var->yoffset < 0) |
| var->yoffset = 0; |
| |
| if (var->xoffset + info->var.xres > info->var.xres_virtual) |
| var->xoffset = info->var.xres_virtual - info->var.xres; |
| |
| if (var->yoffset + info->var.yres > info->var.yres_virtual) |
| var->yoffset = info->var.yres_virtual - info->var.yres; |
| |
| if ((var->bits_per_pixel != 32) && (var->bits_per_pixel != 24) && |
| (var->bits_per_pixel != 16)) |
| var->bits_per_pixel = default_bpp; |
| |
| switch (var->bits_per_pixel) { |
| case 16: |
| var->red.length = 5; |
| var->red.offset = 11; |
| var->red.msb_right = 0; |
| |
| var->green.length = 6; |
| var->green.offset = 5; |
| var->green.msb_right = 0; |
| |
| var->blue.length = 5; |
| var->blue.offset = 0; |
| var->blue.msb_right = 0; |
| |
| var->transp.length = 0; |
| var->transp.offset = 0; |
| var->transp.msb_right = 0; |
| break; |
| case 24: |
| var->red.length = 8; |
| var->red.offset = 0; |
| var->red.msb_right = 0; |
| |
| var->green.length = 8; |
| var->green.offset = 8; |
| var->green.msb_right = 0; |
| |
| var->blue.length = 8; |
| var->blue.offset = 16; |
| var->blue.msb_right = 0; |
| |
| var->transp.length = 0; |
| var->transp.offset = 0; |
| var->transp.msb_right = 0; |
| break; |
| case 32: |
| var->red.length = 8; |
| var->red.offset = 16; |
| var->red.msb_right = 0; |
| |
| var->green.length = 8; |
| var->green.offset = 8; |
| var->green.msb_right = 0; |
| |
| var->blue.length = 8; |
| var->blue.offset = 0; |
| var->blue.msb_right = 0; |
| |
| var->transp.length = 8; |
| var->transp.offset = 24; |
| var->transp.msb_right = 0; |
| |
| break; |
| } |
| /* If the pixclock is below the minimum spec'd value then set to |
| * refresh rate for 60Hz since this is supported by most monitors. |
| * Refer to Documentation/fb/ for calculations. |
| */ |
| if ((var->pixclock < MIN_PIX_CLK) || (var->pixclock > MAX_PIX_CLK)) { |
| htotal = var->xres + var->right_margin + var->hsync_len + |
| var->left_margin; |
| vtotal = var->yres + var->lower_margin + var->vsync_len + |
| var->upper_margin; |
| var->pixclock = (vtotal * htotal * 6UL) / 100UL; |
| var->pixclock = KHZ2PICOS(var->pixclock); |
| pr_debug("pixclock set for 60Hz refresh = %u ps\n", |
| var->pixclock); |
| } |
| |
| var->height = -1; |
| var->width = -1; |
| var->grayscale = 0; |
| |
| /* Copy nonstd field to/from sync for fbset usage */ |
| var->sync |= var->nonstd; |
| var->nonstd |= var->sync; |
| |
| adjust_aoi_size_position(var, info); |
| return 0; |
| } |
| |
| static void set_fix(struct fb_info *info) |
| { |
| struct fb_fix_screeninfo *fix = &info->fix; |
| struct fb_var_screeninfo *var = &info->var; |
| struct mfb_info *mfbi = info->par; |
| |
| strncpy(fix->id, mfbi->id, strlen(mfbi->id)); |
| fix->line_length = var->xres_virtual * var->bits_per_pixel / 8; |
| fix->type = FB_TYPE_PACKED_PIXELS; |
| fix->accel = FB_ACCEL_NONE; |
| fix->visual = FB_VISUAL_TRUECOLOR; |
| fix->xpanstep = 1; |
| fix->ypanstep = 1; |
| } |
| |
| static void update_lcdc(struct fb_info *info) |
| { |
| struct fb_var_screeninfo *var = &info->var; |
| struct mfb_info *mfbi = info->par; |
| struct fsl_diu_data *machine_data = mfbi->parent; |
| struct diu *hw; |
| int i, j; |
| char __iomem *cursor_base, *gamma_table_base; |
| |
| u32 temp; |
| |
| hw = dr.diu_reg; |
| |
| if (mfbi->type == MFB_TYPE_OFF) { |
| fsl_diu_disable_panel(info); |
| return; |
| } |
| |
| diu_ops.set_monitor_port(machine_data->monitor_port); |
| gamma_table_base = pool.gamma.vaddr; |
| cursor_base = pool.cursor.vaddr; |
| /* Prep for DIU init - gamma table, cursor table */ |
| |
| for (i = 0; i <= 2; i++) |
| for (j = 0; j <= 255; j++) |
| *gamma_table_base++ = j; |
| |
| diu_ops.set_gamma_table(machine_data->monitor_port, pool.gamma.vaddr); |
| |
| pr_debug("update-lcdc: HW - %p\n Disabling DIU\n", hw); |
| disable_lcdc(info); |
| |
| /* Program DIU registers */ |
| |
| out_be32(&hw->gamma, pool.gamma.paddr); |
| out_be32(&hw->cursor, pool.cursor.paddr); |
| |
| out_be32(&hw->bgnd, 0x007F7F7F); /* BGND */ |
| out_be32(&hw->bgnd_wb, 0); /* BGND_WB */ |
| out_be32(&hw->disp_size, (var->yres << 16 | var->xres)); |
| /* DISP SIZE */ |
| pr_debug("DIU xres: %d\n", var->xres); |
| pr_debug("DIU yres: %d\n", var->yres); |
| |
| out_be32(&hw->wb_size, 0); /* WB SIZE */ |
| out_be32(&hw->wb_mem_addr, 0); /* WB MEM ADDR */ |
| |
| /* Horizontal and vertical configuration register */ |
| temp = var->left_margin << 22 | /* BP_H */ |
| var->hsync_len << 11 | /* PW_H */ |
| var->right_margin; /* FP_H */ |
| |
| out_be32(&hw->hsyn_para, temp); |
| |
| temp = var->upper_margin << 22 | /* BP_V */ |
| var->vsync_len << 11 | /* PW_V */ |
| var->lower_margin; /* FP_V */ |
| |
| out_be32(&hw->vsyn_para, temp); |
| |
| pr_debug("DIU right_margin - %d\n", var->right_margin); |
| pr_debug("DIU left_margin - %d\n", var->left_margin); |
| pr_debug("DIU hsync_len - %d\n", var->hsync_len); |
| pr_debug("DIU upper_margin - %d\n", var->upper_margin); |
| pr_debug("DIU lower_margin - %d\n", var->lower_margin); |
| pr_debug("DIU vsync_len - %d\n", var->vsync_len); |
| pr_debug("DIU HSYNC - 0x%08x\n", hw->hsyn_para); |
| pr_debug("DIU VSYNC - 0x%08x\n", hw->vsyn_para); |
| |
| diu_ops.set_pixel_clock(var->pixclock); |
| |
| out_be32(&hw->syn_pol, 0); /* SYNC SIGNALS POLARITY */ |
| out_be32(&hw->thresholds, 0x00037800); /* The Thresholds */ |
| out_be32(&hw->int_status, 0); /* INTERRUPT STATUS */ |
| out_be32(&hw->plut, 0x01F5F666); |
| |
| /* Enable the DIU */ |
| enable_lcdc(info); |
| } |
| |
| static int map_video_memory(struct fb_info *info) |
| { |
| phys_addr_t phys; |
| u32 smem_len = info->fix.line_length * info->var.yres_virtual; |
| |
| pr_debug("info->var.xres_virtual = %d\n", info->var.xres_virtual); |
| pr_debug("info->var.yres_virtual = %d\n", info->var.yres_virtual); |
| pr_debug("info->fix.line_length = %d\n", info->fix.line_length); |
| pr_debug("MAP_VIDEO_MEMORY: smem_len = %u\n", smem_len); |
| |
| info->screen_base = fsl_diu_alloc(smem_len, &phys); |
| if (info->screen_base == NULL) { |
| printk(KERN_ERR "Unable to allocate fb memory\n"); |
| return -ENOMEM; |
| } |
| mutex_lock(&info->mm_lock); |
| info->fix.smem_start = (unsigned long) phys; |
| info->fix.smem_len = smem_len; |
| mutex_unlock(&info->mm_lock); |
| info->screen_size = info->fix.smem_len; |
| |
| pr_debug("Allocated fb @ paddr=0x%08lx, size=%d.\n", |
| info->fix.smem_start, info->fix.smem_len); |
| pr_debug("screen base %p\n", info->screen_base); |
| |
| return 0; |
| } |
| |
| static void unmap_video_memory(struct fb_info *info) |
| { |
| fsl_diu_free(info->screen_base, info->fix.smem_len); |
| mutex_lock(&info->mm_lock); |
| info->screen_base = NULL; |
| info->fix.smem_start = 0; |
| info->fix.smem_len = 0; |
| mutex_unlock(&info->mm_lock); |
| } |
| |
| /* |
| * Using the fb_var_screeninfo in fb_info we set the aoi of this |
| * particular framebuffer. It is a light version of fsl_diu_set_par. |
| */ |
| static int fsl_diu_set_aoi(struct fb_info *info) |
| { |
| struct fb_var_screeninfo *var = &info->var; |
| struct mfb_info *mfbi = info->par; |
| struct diu_ad *ad = mfbi->ad; |
| |
| /* AOI should not be greater than display size */ |
| ad->offset_xyi = cpu_to_le32((var->yoffset << 16) | var->xoffset); |
| ad->offset_xyd = cpu_to_le32((mfbi->y_aoi_d << 16) | mfbi->x_aoi_d); |
| return 0; |
| } |
| |
| /* |
| * Using the fb_var_screeninfo in fb_info we set the resolution of this |
| * particular framebuffer. This function alters the fb_fix_screeninfo stored |
| * in fb_info. It does not alter var in fb_info since we are using that |
| * data. This means we depend on the data in var inside fb_info to be |
| * supported by the hardware. fsl_diu_check_var is always called before |
| * fsl_diu_set_par to ensure this. |
| */ |
| static int fsl_diu_set_par(struct fb_info *info) |
| { |
| unsigned long len; |
| struct fb_var_screeninfo *var = &info->var; |
| struct mfb_info *mfbi = info->par; |
| struct fsl_diu_data *machine_data = mfbi->parent; |
| struct diu_ad *ad = mfbi->ad; |
| struct diu *hw; |
| |
| hw = dr.diu_reg; |
| |
| set_fix(info); |
| mfbi->cursor_reset = 1; |
| |
| len = info->var.yres_virtual * info->fix.line_length; |
| /* Alloc & dealloc each time resolution/bpp change */ |
| if (len != info->fix.smem_len) { |
| if (info->fix.smem_start) |
| unmap_video_memory(info); |
| pr_debug("SET PAR: smem_len = %d\n", info->fix.smem_len); |
| |
| /* Memory allocation for framebuffer */ |
| if (map_video_memory(info)) { |
| printk(KERN_ERR "Unable to allocate fb memory 1\n"); |
| return -ENOMEM; |
| } |
| } |
| |
| ad->pix_fmt = |
| diu_ops.get_pixel_format(var->bits_per_pixel, |
| machine_data->monitor_port); |
| ad->addr = cpu_to_le32(info->fix.smem_start); |
| ad->src_size_g_alpha = cpu_to_le32((var->yres_virtual << 12) | |
| var->xres_virtual) | mfbi->g_alpha; |
| /* AOI should not be greater than display size */ |
| ad->aoi_size = cpu_to_le32((var->yres << 16) | var->xres); |
| ad->offset_xyi = cpu_to_le32((var->yoffset << 16) | var->xoffset); |
| ad->offset_xyd = cpu_to_le32((mfbi->y_aoi_d << 16) | mfbi->x_aoi_d); |
| |
| /* Disable chroma keying function */ |
| ad->ckmax_r = 0; |
| ad->ckmax_g = 0; |
| ad->ckmax_b = 0; |
| |
| ad->ckmin_r = 255; |
| ad->ckmin_g = 255; |
| ad->ckmin_b = 255; |
| |
| if (mfbi->index == 0) |
| update_lcdc(info); |
| return 0; |
| } |
| |
| static inline __u32 CNVT_TOHW(__u32 val, __u32 width) |
| { |
| return ((val<<width) + 0x7FFF - val)>>16; |
| } |
| |
| /* |
| * Set a single color register. The values supplied have a 16 bit magnitude |
| * which needs to be scaled in this function for the hardware. Things to take |
| * into consideration are how many color registers, if any, are supported with |
| * the current color visual. With truecolor mode no color palettes are |
| * supported. Here a psuedo palette is created which we store the value in |
| * pseudo_palette in struct fb_info. For pseudocolor mode we have a limited |
| * color palette. |
| */ |
| static int fsl_diu_setcolreg(unsigned regno, unsigned red, unsigned green, |
| unsigned blue, unsigned transp, struct fb_info *info) |
| { |
| int ret = 1; |
| |
| /* |
| * If greyscale is true, then we convert the RGB value |
| * to greyscale no matter what visual we are using. |
| */ |
| if (info->var.grayscale) |
| red = green = blue = (19595 * red + 38470 * green + |
| 7471 * blue) >> 16; |
| switch (info->fix.visual) { |
| case FB_VISUAL_TRUECOLOR: |
| /* |
| * 16-bit True Colour. We encode the RGB value |
| * according to the RGB bitfield information. |
| */ |
| if (regno < 16) { |
| u32 *pal = info->pseudo_palette; |
| u32 v; |
| |
| red = CNVT_TOHW(red, info->var.red.length); |
| green = CNVT_TOHW(green, info->var.green.length); |
| blue = CNVT_TOHW(blue, info->var.blue.length); |
| transp = CNVT_TOHW(transp, info->var.transp.length); |
| |
| v = (red << info->var.red.offset) | |
| (green << info->var.green.offset) | |
| (blue << info->var.blue.offset) | |
| (transp << info->var.transp.offset); |
| |
| pal[regno] = v; |
| ret = 0; |
| } |
| break; |
| case FB_VISUAL_STATIC_PSEUDOCOLOR: |
| case FB_VISUAL_PSEUDOCOLOR: |
| break; |
| } |
| |
| return ret; |
| } |
| |
| /* |
| * Pan (or wrap, depending on the `vmode' field) the display using the |
| * 'xoffset' and 'yoffset' fields of the 'var' structure. If the values |
| * don't fit, return -EINVAL. |
| */ |
| static int fsl_diu_pan_display(struct fb_var_screeninfo *var, |
| struct fb_info *info) |
| { |
| if ((info->var.xoffset == var->xoffset) && |
| (info->var.yoffset == var->yoffset)) |
| return 0; /* No change, do nothing */ |
| |
| if (var->xoffset < 0 || var->yoffset < 0 |
| || var->xoffset + info->var.xres > info->var.xres_virtual |
| || var->yoffset + info->var.yres > info->var.yres_virtual) |
| return -EINVAL; |
| |
| info->var.xoffset = var->xoffset; |
| info->var.yoffset = var->yoffset; |
| |
| if (var->vmode & FB_VMODE_YWRAP) |
| info->var.vmode |= FB_VMODE_YWRAP; |
| else |
| info->var.vmode &= ~FB_VMODE_YWRAP; |
| |
| fsl_diu_set_aoi(info); |
| |
| return 0; |
| } |
| |
| /* |
| * Blank the screen if blank_mode != 0, else unblank. Return 0 if blanking |
| * succeeded, != 0 if un-/blanking failed. |
| * blank_mode == 2: suspend vsync |
| * blank_mode == 3: suspend hsync |
| * blank_mode == 4: powerdown |
| */ |
| static int fsl_diu_blank(int blank_mode, struct fb_info *info) |
| { |
| struct mfb_info *mfbi = info->par; |
| |
| mfbi->blank = blank_mode; |
| |
| switch (blank_mode) { |
| case FB_BLANK_VSYNC_SUSPEND: |
| case FB_BLANK_HSYNC_SUSPEND: |
| /* FIXME: fixes to enable_panel and enable lcdc needed */ |
| case FB_BLANK_NORMAL: |
| /* fsl_diu_disable_panel(info);*/ |
| break; |
| case FB_BLANK_POWERDOWN: |
| /* disable_lcdc(info); */ |
| break; |
| case FB_BLANK_UNBLANK: |
| /* fsl_diu_enable_panel(info);*/ |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static int fsl_diu_ioctl(struct fb_info *info, unsigned int cmd, |
| unsigned long arg) |
| { |
| struct mfb_info *mfbi = info->par; |
| struct diu_ad *ad = mfbi->ad; |
| struct mfb_chroma_key ck; |
| unsigned char global_alpha; |
| struct aoi_display_offset aoi_d; |
| __u32 pix_fmt; |
| void __user *buf = (void __user *)arg; |
| |
| if (!arg) |
| return -EINVAL; |
| switch (cmd) { |
| case MFB_SET_PIXFMT: |
| if (copy_from_user(&pix_fmt, buf, sizeof(pix_fmt))) |
| return -EFAULT; |
| ad->pix_fmt = pix_fmt; |
| pr_debug("Set pixel format to 0x%08x\n", ad->pix_fmt); |
| break; |
| case MFB_GET_PIXFMT: |
| pix_fmt = ad->pix_fmt; |
| if (copy_to_user(buf, &pix_fmt, sizeof(pix_fmt))) |
| return -EFAULT; |
| pr_debug("get pixel format 0x%08x\n", ad->pix_fmt); |
| break; |
| case MFB_SET_AOID: |
| if (copy_from_user(&aoi_d, buf, sizeof(aoi_d))) |
| return -EFAULT; |
| mfbi->x_aoi_d = aoi_d.x_aoi_d; |
| mfbi->y_aoi_d = aoi_d.y_aoi_d; |
| pr_debug("set AOI display offset of index %d to (%d,%d)\n", |
| mfbi->index, aoi_d.x_aoi_d, aoi_d.y_aoi_d); |
| fsl_diu_check_var(&info->var, info); |
| fsl_diu_set_aoi(info); |
| break; |
| case MFB_GET_AOID: |
| aoi_d.x_aoi_d = mfbi->x_aoi_d; |
| aoi_d.y_aoi_d = mfbi->y_aoi_d; |
| if (copy_to_user(buf, &aoi_d, sizeof(aoi_d))) |
| return -EFAULT; |
| pr_debug("get AOI display offset of index %d (%d,%d)\n", |
| mfbi->index, aoi_d.x_aoi_d, aoi_d.y_aoi_d); |
| break; |
| case MFB_GET_ALPHA: |
| global_alpha = mfbi->g_alpha; |
| if (copy_to_user(buf, &global_alpha, sizeof(global_alpha))) |
| return -EFAULT; |
| pr_debug("get global alpha of index %d\n", mfbi->index); |
| break; |
| case MFB_SET_ALPHA: |
| /* set panel information */ |
| if (copy_from_user(&global_alpha, buf, sizeof(global_alpha))) |
| return -EFAULT; |
| ad->src_size_g_alpha = (ad->src_size_g_alpha & (~0xff)) | |
| (global_alpha & 0xff); |
| mfbi->g_alpha = global_alpha; |
| pr_debug("set global alpha for index %d\n", mfbi->index); |
| break; |
| case MFB_SET_CHROMA_KEY: |
| /* set panel winformation */ |
| if (copy_from_user(&ck, buf, sizeof(ck))) |
| return -EFAULT; |
| |
| if (ck.enable && |
| (ck.red_max < ck.red_min || |
| ck.green_max < ck.green_min || |
| ck.blue_max < ck.blue_min)) |
| return -EINVAL; |
| |
| if (!ck.enable) { |
| ad->ckmax_r = 0; |
| ad->ckmax_g = 0; |
| ad->ckmax_b = 0; |
| ad->ckmin_r = 255; |
| ad->ckmin_g = 255; |
| ad->ckmin_b = 255; |
| } else { |
| ad->ckmax_r = ck.red_max; |
| ad->ckmax_g = ck.green_max; |
| ad->ckmax_b = ck.blue_max; |
| ad->ckmin_r = ck.red_min; |
| ad->ckmin_g = ck.green_min; |
| ad->ckmin_b = ck.blue_min; |
| } |
| pr_debug("set chroma key\n"); |
| break; |
| case FBIOGET_GWINFO: |
| if (mfbi->type == MFB_TYPE_OFF) |
| return -ENODEV; |
| /* get graphic window information */ |
| if (copy_to_user(buf, ad, sizeof(*ad))) |
| return -EFAULT; |
| break; |
| case FBIOGET_HWCINFO: |
| pr_debug("FBIOGET_HWCINFO:0x%08x\n", FBIOGET_HWCINFO); |
| break; |
| case FBIOPUT_MODEINFO: |
| pr_debug("FBIOPUT_MODEINFO:0x%08x\n", FBIOPUT_MODEINFO); |
| break; |
| case FBIOGET_DISPINFO: |
| pr_debug("FBIOGET_DISPINFO:0x%08x\n", FBIOGET_DISPINFO); |
| break; |
| |
| default: |
| printk(KERN_ERR "Unknown ioctl command (0x%08X)\n", cmd); |
| return -ENOIOCTLCMD; |
| } |
| |
| return 0; |
| } |
| |
| /* turn on fb if count == 1 |
| */ |
| static int fsl_diu_open(struct fb_info *info, int user) |
| { |
| struct mfb_info *mfbi = info->par; |
| int res = 0; |
| |
| spin_lock(&diu_lock); |
| mfbi->count++; |
| if (mfbi->count == 1) { |
| pr_debug("open plane index %d\n", mfbi->index); |
| fsl_diu_check_var(&info->var, info); |
| res = fsl_diu_set_par(info); |
| if (res < 0) |
| mfbi->count--; |
| else { |
| res = fsl_diu_enable_panel(info); |
| if (res < 0) |
| mfbi->count--; |
| } |
| } |
| |
| spin_unlock(&diu_lock); |
| return res; |
| } |
| |
| /* turn off fb if count == 0 |
| */ |
| static int fsl_diu_release(struct fb_info *info, int user) |
| { |
| struct mfb_info *mfbi = info->par; |
| int res = 0; |
| |
| spin_lock(&diu_lock); |
| mfbi->count--; |
| if (mfbi->count == 0) { |
| pr_debug("release plane index %d\n", mfbi->index); |
| res = fsl_diu_disable_panel(info); |
| if (res < 0) |
| mfbi->count++; |
| } |
| spin_unlock(&diu_lock); |
| return res; |
| } |
| |
| static struct fb_ops fsl_diu_ops = { |
| .owner = THIS_MODULE, |
| .fb_check_var = fsl_diu_check_var, |
| .fb_set_par = fsl_diu_set_par, |
| .fb_setcolreg = fsl_diu_setcolreg, |
| .fb_blank = fsl_diu_blank, |
| .fb_pan_display = fsl_diu_pan_display, |
| .fb_fillrect = cfb_fillrect, |
| .fb_copyarea = cfb_copyarea, |
| .fb_imageblit = cfb_imageblit, |
| .fb_ioctl = fsl_diu_ioctl, |
| .fb_open = fsl_diu_open, |
| .fb_release = fsl_diu_release, |
| }; |
| |
| static int init_fbinfo(struct fb_info *info) |
| { |
| struct mfb_info *mfbi = info->par; |
| |
| info->device = NULL; |
| info->var.activate = FB_ACTIVATE_NOW; |
| info->fbops = &fsl_diu_ops; |
| info->flags = FBINFO_FLAG_DEFAULT; |
| info->pseudo_palette = &mfbi->pseudo_palette; |
| |
| /* Allocate colormap */ |
| fb_alloc_cmap(&info->cmap, 16, 0); |
| return 0; |
| } |
| |
| static int __devinit install_fb(struct fb_info *info) |
| { |
| int rc; |
| struct mfb_info *mfbi = info->par; |
| const char *aoi_mode, *init_aoi_mode = "320x240"; |
| |
| if (init_fbinfo(info)) |
| return -EINVAL; |
| |
| if (mfbi->index == 0) /* plane 0 */ |
| aoi_mode = fb_mode; |
| else |
| aoi_mode = init_aoi_mode; |
| pr_debug("mode used = %s\n", aoi_mode); |
| rc = fb_find_mode(&info->var, info, aoi_mode, fsl_diu_mode_db, |
| ARRAY_SIZE(fsl_diu_mode_db), &fsl_diu_default_mode, default_bpp); |
| |
| switch (rc) { |
| case 1: |
| pr_debug("using mode specified in @mode\n"); |
| break; |
| case 2: |
| pr_debug("using mode specified in @mode " |
| "with ignored refresh rate\n"); |
| break; |
| case 3: |
| pr_debug("using mode default mode\n"); |
| break; |
| case 4: |
| pr_debug("using mode from list\n"); |
| break; |
| default: |
| pr_debug("rc = %d\n", rc); |
| pr_debug("failed to find mode\n"); |
| return -EINVAL; |
| break; |
| } |
| |
| pr_debug("xres_virtual %d\n", info->var.xres_virtual); |
| pr_debug("bits_per_pixel %d\n", info->var.bits_per_pixel); |
| |
| pr_debug("info->var.yres_virtual = %d\n", info->var.yres_virtual); |
| pr_debug("info->fix.line_length = %d\n", info->fix.line_length); |
| |
| if (mfbi->type == MFB_TYPE_OFF) |
| mfbi->blank = FB_BLANK_NORMAL; |
| else |
| mfbi->blank = FB_BLANK_UNBLANK; |
| |
| if (fsl_diu_check_var(&info->var, info)) { |
| printk(KERN_ERR "fb_check_var failed"); |
| fb_dealloc_cmap(&info->cmap); |
| return -EINVAL; |
| } |
| |
| if (register_framebuffer(info) < 0) { |
| printk(KERN_ERR "register_framebuffer failed"); |
| unmap_video_memory(info); |
| fb_dealloc_cmap(&info->cmap); |
| return -EINVAL; |
| } |
| |
| mfbi->registered = 1; |
| printk(KERN_INFO "fb%d: %s fb device registered successfully.\n", |
| info->node, info->fix.id); |
| |
| return 0; |
| } |
| |
| static void uninstall_fb(struct fb_info *info) |
| { |
| struct mfb_info *mfbi = info->par; |
| |
| if (!mfbi->registered) |
| return; |
| |
| unregister_framebuffer(info); |
| unmap_video_memory(info); |
| if (&info->cmap) |
| fb_dealloc_cmap(&info->cmap); |
| |
| mfbi->registered = 0; |
| } |
| |
| static irqreturn_t fsl_diu_isr(int irq, void *dev_id) |
| { |
| struct diu *hw = dr.diu_reg; |
| unsigned int status = in_be32(&hw->int_status); |
| |
| if (status) { |
| /* This is the workaround for underrun */ |
| if (status & INT_UNDRUN) { |
| out_be32(&hw->diu_mode, 0); |
| pr_debug("Err: DIU occurs underrun!\n"); |
| udelay(1); |
| out_be32(&hw->diu_mode, 1); |
| } |
| #if defined(CONFIG_NOT_COHERENT_CACHE) |
| else if (status & INT_VSYNC) { |
| unsigned int i; |
| for (i = 0; i < coherence_data_size; |
| i += d_cache_line_size) |
| __asm__ __volatile__ ( |
| "dcbz 0, %[input]" |
| ::[input]"r"(&coherence_data[i])); |
| } |
| #endif |
| return IRQ_HANDLED; |
| } |
| return IRQ_NONE; |
| } |
| |
| static int request_irq_local(int irq) |
| { |
| unsigned long status, ints; |
| struct diu *hw; |
| int ret; |
| |
| hw = dr.diu_reg; |
| |
| /* Read to clear the status */ |
| status = in_be32(&hw->int_status); |
| |
| ret = request_irq(irq, fsl_diu_isr, 0, "diu", NULL); |
| if (ret) |
| pr_info("Request diu IRQ failed.\n"); |
| else { |
| ints = INT_PARERR | INT_LS_BF_VS; |
| #if !defined(CONFIG_NOT_COHERENT_CACHE) |
| ints |= INT_VSYNC; |
| #endif |
| if (dr.mode == MFB_MODE2 || dr.mode == MFB_MODE3) |
| ints |= INT_VSYNC_WB; |
| |
| /* Read to clear the status */ |
| status = in_be32(&hw->int_status); |
| out_be32(&hw->int_mask, ints); |
| } |
| return ret; |
| } |
| |
| static void free_irq_local(int irq) |
| { |
| struct diu *hw = dr.diu_reg; |
| |
| /* Disable all LCDC interrupt */ |
| out_be32(&hw->int_mask, 0x1f); |
| |
| free_irq(irq, NULL); |
| } |
| |
| #ifdef CONFIG_PM |
| /* |
| * Power management hooks. Note that we won't be called from IRQ context, |
| * unlike the blank functions above, so we may sleep. |
| */ |
| static int fsl_diu_suspend(struct of_device *ofdev, pm_message_t state) |
| { |
| struct fsl_diu_data *machine_data; |
| |
| machine_data = dev_get_drvdata(&ofdev->dev); |
| disable_lcdc(machine_data->fsl_diu_info[0]); |
| |
| return 0; |
| } |
| |
| static int fsl_diu_resume(struct of_device *ofdev) |
| { |
| struct fsl_diu_data *machine_data; |
| |
| machine_data = dev_get_drvdata(&ofdev->dev); |
| enable_lcdc(machine_data->fsl_diu_info[0]); |
| |
| return 0; |
| } |
| |
| #else |
| #define fsl_diu_suspend NULL |
| #define fsl_diu_resume NULL |
| #endif /* CONFIG_PM */ |
| |
| /* Align to 64-bit(8-byte), 32-byte, etc. */ |
| static int allocate_buf(struct device *dev, struct diu_addr *buf, u32 size, |
| u32 bytes_align) |
| { |
| u32 offset, ssize; |
| u32 mask; |
| dma_addr_t paddr = 0; |
| |
| ssize = size + bytes_align; |
| buf->vaddr = dma_alloc_coherent(dev, ssize, &paddr, GFP_DMA | |
| __GFP_ZERO); |
| if (!buf->vaddr) |
| return -ENOMEM; |
| |
| buf->paddr = (__u32) paddr; |
| |
| mask = bytes_align - 1; |
| offset = (u32)buf->paddr & mask; |
| if (offset) { |
| buf->offset = bytes_align - offset; |
| buf->paddr = (u32)buf->paddr + offset; |
| } else |
| buf->offset = 0; |
| return 0; |
| } |
| |
| static void free_buf(struct device *dev, struct diu_addr *buf, u32 size, |
| u32 bytes_align) |
| { |
| dma_free_coherent(dev, size + bytes_align, |
| buf->vaddr, (buf->paddr - buf->offset)); |
| return; |
| } |
| |
| static ssize_t store_monitor(struct device *device, |
| struct device_attribute *attr, const char *buf, size_t count) |
| { |
| int old_monitor_port; |
| unsigned long val; |
| struct fsl_diu_data *machine_data = |
| container_of(attr, struct fsl_diu_data, dev_attr); |
| |
| if (strict_strtoul(buf, 10, &val)) |
| return 0; |
| |
| old_monitor_port = machine_data->monitor_port; |
| machine_data->monitor_port = diu_ops.set_sysfs_monitor_port(val); |
| |
| if (old_monitor_port != machine_data->monitor_port) { |
| /* All AOIs need adjust pixel format |
| * fsl_diu_set_par only change the pixsel format here |
| * unlikely to fail. */ |
| fsl_diu_set_par(machine_data->fsl_diu_info[0]); |
| fsl_diu_set_par(machine_data->fsl_diu_info[1]); |
| fsl_diu_set_par(machine_data->fsl_diu_info[2]); |
| fsl_diu_set_par(machine_data->fsl_diu_info[3]); |
| fsl_diu_set_par(machine_data->fsl_diu_info[4]); |
| } |
| return count; |
| } |
| |
| static ssize_t show_monitor(struct device *device, |
| struct device_attribute *attr, char *buf) |
| { |
| struct fsl_diu_data *machine_data = |
| container_of(attr, struct fsl_diu_data, dev_attr); |
| return diu_ops.show_monitor_port(machine_data->monitor_port, buf); |
| } |
| |
| static int __devinit fsl_diu_probe(struct of_device *ofdev, |
| const struct of_device_id *match) |
| { |
| struct device_node *np = ofdev->dev.of_node; |
| struct mfb_info *mfbi; |
| phys_addr_t dummy_ad_addr; |
| int ret, i, error = 0; |
| struct resource res; |
| struct fsl_diu_data *machine_data; |
| |
| machine_data = kzalloc(sizeof(struct fsl_diu_data), GFP_KERNEL); |
| if (!machine_data) |
| return -ENOMEM; |
| |
| for (i = 0; i < ARRAY_SIZE(machine_data->fsl_diu_info); i++) { |
| machine_data->fsl_diu_info[i] = |
| framebuffer_alloc(sizeof(struct mfb_info), &ofdev->dev); |
| if (!machine_data->fsl_diu_info[i]) { |
| dev_err(&ofdev->dev, "cannot allocate memory\n"); |
| ret = -ENOMEM; |
| goto error2; |
| } |
| mfbi = machine_data->fsl_diu_info[i]->par; |
| memcpy(mfbi, &mfb_template[i], sizeof(struct mfb_info)); |
| mfbi->parent = machine_data; |
| } |
| |
| ret = of_address_to_resource(np, 0, &res); |
| if (ret) { |
| dev_err(&ofdev->dev, "could not obtain DIU address\n"); |
| goto error; |
| } |
| if (!res.start) { |
| dev_err(&ofdev->dev, "invalid DIU address\n"); |
| goto error; |
| } |
| dev_dbg(&ofdev->dev, "%s, res.start: 0x%08x\n", __func__, res.start); |
| |
| dr.diu_reg = ioremap(res.start, sizeof(struct diu)); |
| if (!dr.diu_reg) { |
| dev_err(&ofdev->dev, "Err: can't map DIU registers!\n"); |
| ret = -EFAULT; |
| goto error2; |
| } |
| |
| out_be32(&dr.diu_reg->diu_mode, 0); /* disable DIU anyway*/ |
| |
| /* Get the IRQ of the DIU */ |
| machine_data->irq = irq_of_parse_and_map(np, 0); |
| |
| if (!machine_data->irq) { |
| dev_err(&ofdev->dev, "could not get DIU IRQ\n"); |
| ret = -EINVAL; |
| goto error; |
| } |
| machine_data->monitor_port = monitor_port; |
| |
| /* Area descriptor memory pool aligns to 64-bit boundary */ |
| if (allocate_buf(&ofdev->dev, &pool.ad, |
| sizeof(struct diu_ad) * FSL_AOI_NUM, 8)) |
| return -ENOMEM; |
| |
| /* Get memory for Gamma Table - 32-byte aligned memory */ |
| if (allocate_buf(&ofdev->dev, &pool.gamma, 768, 32)) { |
| ret = -ENOMEM; |
| goto error; |
| } |
| |
| /* For performance, cursor bitmap buffer aligns to 32-byte boundary */ |
| if (allocate_buf(&ofdev->dev, &pool.cursor, MAX_CURS * MAX_CURS * 2, |
| 32)) { |
| ret = -ENOMEM; |
| goto error; |
| } |
| |
| i = ARRAY_SIZE(machine_data->fsl_diu_info); |
| machine_data->dummy_ad = (struct diu_ad *) |
| ((u32)pool.ad.vaddr + pool.ad.offset) + i; |
| machine_data->dummy_ad->paddr = pool.ad.paddr + |
| i * sizeof(struct diu_ad); |
| machine_data->dummy_aoi_virt = fsl_diu_alloc(64, &dummy_ad_addr); |
| if (!machine_data->dummy_aoi_virt) { |
| ret = -ENOMEM; |
| goto error; |
| } |
| machine_data->dummy_ad->addr = cpu_to_le32(dummy_ad_addr); |
| machine_data->dummy_ad->pix_fmt = 0x88882317; |
| machine_data->dummy_ad->src_size_g_alpha = cpu_to_le32((4 << 12) | 4); |
| machine_data->dummy_ad->aoi_size = cpu_to_le32((4 << 16) | 2); |
| machine_data->dummy_ad->offset_xyi = 0; |
| machine_data->dummy_ad->offset_xyd = 0; |
| machine_data->dummy_ad->next_ad = 0; |
| |
| out_be32(&dr.diu_reg->desc[0], machine_data->dummy_ad->paddr); |
| out_be32(&dr.diu_reg->desc[1], machine_data->dummy_ad->paddr); |
| out_be32(&dr.diu_reg->desc[2], machine_data->dummy_ad->paddr); |
| |
| for (i = 0; i < ARRAY_SIZE(machine_data->fsl_diu_info); i++) { |
| machine_data->fsl_diu_info[i]->fix.smem_start = 0; |
| mfbi = machine_data->fsl_diu_info[i]->par; |
| mfbi->ad = (struct diu_ad *)((u32)pool.ad.vaddr |
| + pool.ad.offset) + i; |
| mfbi->ad->paddr = pool.ad.paddr + i * sizeof(struct diu_ad); |
| ret = install_fb(machine_data->fsl_diu_info[i]); |
| if (ret) { |
| dev_err(&ofdev->dev, |
| "Failed to register framebuffer %d\n", |
| i); |
| goto error; |
| } |
| } |
| |
| if (request_irq_local(machine_data->irq)) { |
| dev_err(machine_data->fsl_diu_info[0]->dev, |
| "could not request irq for diu."); |
| goto error; |
| } |
| |
| sysfs_attr_init(&machine_data->dev_attr.attr); |
| machine_data->dev_attr.attr.name = "monitor"; |
| machine_data->dev_attr.attr.mode = S_IRUGO|S_IWUSR; |
| machine_data->dev_attr.show = show_monitor; |
| machine_data->dev_attr.store = store_monitor; |
| error = device_create_file(machine_data->fsl_diu_info[0]->dev, |
| &machine_data->dev_attr); |
| if (error) { |
| dev_err(machine_data->fsl_diu_info[0]->dev, |
| "could not create sysfs %s file\n", |
| machine_data->dev_attr.attr.name); |
| } |
| |
| dev_set_drvdata(&ofdev->dev, machine_data); |
| return 0; |
| |
| error: |
| for (i = ARRAY_SIZE(machine_data->fsl_diu_info); |
| i > 0; i--) |
| uninstall_fb(machine_data->fsl_diu_info[i - 1]); |
| if (pool.ad.vaddr) |
| free_buf(&ofdev->dev, &pool.ad, |
| sizeof(struct diu_ad) * FSL_AOI_NUM, 8); |
| if (pool.gamma.vaddr) |
| free_buf(&ofdev->dev, &pool.gamma, 768, 32); |
| if (pool.cursor.vaddr) |
| free_buf(&ofdev->dev, &pool.cursor, MAX_CURS * MAX_CURS * 2, |
| 32); |
| if (machine_data->dummy_aoi_virt) |
| fsl_diu_free(machine_data->dummy_aoi_virt, 64); |
| iounmap(dr.diu_reg); |
| |
| error2: |
| for (i = 0; i < ARRAY_SIZE(machine_data->fsl_diu_info); i++) |
| if (machine_data->fsl_diu_info[i]) |
| framebuffer_release(machine_data->fsl_diu_info[i]); |
| kfree(machine_data); |
| |
| return ret; |
| } |
| |
| |
| static int fsl_diu_remove(struct of_device *ofdev) |
| { |
| struct fsl_diu_data *machine_data; |
| int i; |
| |
| machine_data = dev_get_drvdata(&ofdev->dev); |
| disable_lcdc(machine_data->fsl_diu_info[0]); |
| free_irq_local(machine_data->irq); |
| for (i = ARRAY_SIZE(machine_data->fsl_diu_info); i > 0; i--) |
| uninstall_fb(machine_data->fsl_diu_info[i - 1]); |
| if (pool.ad.vaddr) |
| free_buf(&ofdev->dev, &pool.ad, |
| sizeof(struct diu_ad) * FSL_AOI_NUM, 8); |
| if (pool.gamma.vaddr) |
| free_buf(&ofdev->dev, &pool.gamma, 768, 32); |
| if (pool.cursor.vaddr) |
| free_buf(&ofdev->dev, &pool.cursor, MAX_CURS * MAX_CURS * 2, |
| 32); |
| if (machine_data->dummy_aoi_virt) |
| fsl_diu_free(machine_data->dummy_aoi_virt, 64); |
| iounmap(dr.diu_reg); |
| for (i = 0; i < ARRAY_SIZE(machine_data->fsl_diu_info); i++) |
| if (machine_data->fsl_diu_info[i]) |
| framebuffer_release(machine_data->fsl_diu_info[i]); |
| kfree(machine_data); |
| |
| return 0; |
| } |
| |
| #ifndef MODULE |
| static int __init fsl_diu_setup(char *options) |
| { |
| char *opt; |
| unsigned long val; |
| |
| if (!options || !*options) |
| return 0; |
| |
| while ((opt = strsep(&options, ",")) != NULL) { |
| if (!*opt) |
| continue; |
| if (!strncmp(opt, "monitor=", 8)) { |
| if (!strict_strtoul(opt + 8, 10, &val) && (val <= 2)) |
| monitor_port = val; |
| } else if (!strncmp(opt, "bpp=", 4)) { |
| if (!strict_strtoul(opt + 4, 10, &val)) |
| default_bpp = val; |
| } else |
| fb_mode = opt; |
| } |
| |
| return 0; |
| } |
| #endif |
| |
| static struct of_device_id fsl_diu_match[] = { |
| #ifdef CONFIG_PPC_MPC512x |
| { |
| .compatible = "fsl,mpc5121-diu", |
| }, |
| #endif |
| { |
| .compatible = "fsl,diu", |
| }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(of, fsl_diu_match); |
| |
| static struct of_platform_driver fsl_diu_driver = { |
| .driver = { |
| .name = "fsl_diu", |
| .owner = THIS_MODULE, |
| .of_match_table = fsl_diu_match, |
| }, |
| .probe = fsl_diu_probe, |
| .remove = fsl_diu_remove, |
| .suspend = fsl_diu_suspend, |
| .resume = fsl_diu_resume, |
| }; |
| |
| static int __init fsl_diu_init(void) |
| { |
| #ifdef CONFIG_NOT_COHERENT_CACHE |
| struct device_node *np; |
| const u32 *prop; |
| #endif |
| int ret; |
| #ifndef MODULE |
| char *option; |
| |
| /* |
| * For kernel boot options (in 'video=xxxfb:<options>' format) |
| */ |
| if (fb_get_options("fslfb", &option)) |
| return -ENODEV; |
| fsl_diu_setup(option); |
| #endif |
| printk(KERN_INFO "Freescale DIU driver\n"); |
| |
| #ifdef CONFIG_NOT_COHERENT_CACHE |
| np = of_find_node_by_type(NULL, "cpu"); |
| if (!np) { |
| printk(KERN_ERR "Err: can't find device node 'cpu'\n"); |
| return -ENODEV; |
| } |
| |
| prop = of_get_property(np, "d-cache-size", NULL); |
| if (prop == NULL) { |
| of_node_put(np); |
| return -ENODEV; |
| } |
| |
| /* Freescale PLRU requires 13/8 times the cache size to do a proper |
| displacement flush |
| */ |
| coherence_data_size = *prop * 13; |
| coherence_data_size /= 8; |
| |
| prop = of_get_property(np, "d-cache-line-size", NULL); |
| if (prop == NULL) { |
| of_node_put(np); |
| return -ENODEV; |
| } |
| d_cache_line_size = *prop; |
| |
| of_node_put(np); |
| coherence_data = vmalloc(coherence_data_size); |
| if (!coherence_data) |
| return -ENOMEM; |
| #endif |
| ret = of_register_platform_driver(&fsl_diu_driver); |
| if (ret) { |
| printk(KERN_ERR |
| "fsl-diu: failed to register platform driver\n"); |
| #if defined(CONFIG_NOT_COHERENT_CACHE) |
| vfree(coherence_data); |
| #endif |
| iounmap(dr.diu_reg); |
| } |
| return ret; |
| } |
| |
| static void __exit fsl_diu_exit(void) |
| { |
| of_unregister_platform_driver(&fsl_diu_driver); |
| #if defined(CONFIG_NOT_COHERENT_CACHE) |
| vfree(coherence_data); |
| #endif |
| } |
| |
| module_init(fsl_diu_init); |
| module_exit(fsl_diu_exit); |
| |
| MODULE_AUTHOR("York Sun <yorksun@freescale.com>"); |
| MODULE_DESCRIPTION("Freescale DIU framebuffer driver"); |
| MODULE_LICENSE("GPL"); |
| |
| module_param_named(mode, fb_mode, charp, 0); |
| MODULE_PARM_DESC(mode, |
| "Specify resolution as \"<xres>x<yres>[-<bpp>][@<refresh>]\" "); |
| module_param_named(bpp, default_bpp, ulong, 0); |
| MODULE_PARM_DESC(bpp, "Specify bit-per-pixel if not specified mode"); |
| module_param_named(monitor, monitor_port, int, 0); |
| MODULE_PARM_DESC(monitor, |
| "Specify the monitor port (0, 1 or 2) if supported by the platform"); |
| |