ath10k: add hw connection monitor support
Some firmware revisions (e.g. qca6174 with fw73)
don't deliver beacons to host reliably. This
causes random disconnects even in perfect
conditions. This is most visible with
multi-channel operation.
All available firmware revisions seem to support
beacon miss offloading so there shouldn't be any
problems.
Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index 9b8f486..c1f43b0 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -43,6 +43,7 @@
#define ATH10K_SCAN_ID 0
#define WMI_READY_TIMEOUT (5 * HZ)
#define ATH10K_FLUSH_TIMEOUT_HZ (5*HZ)
+#define ATH10K_CONNECTION_LOSS_HZ (3*HZ)
#define ATH10K_NUM_CHANS 38
/* Antenna noise floor */
@@ -342,6 +343,7 @@
int txpower;
struct wmi_wmm_params_all_arg wmm_params;
struct work_struct ap_csa_work;
+ struct delayed_work connection_loss_work;
};
struct ath10k_vif_iter {
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index da4e7a0..e0831e2 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -1509,6 +1509,75 @@
mutex_unlock(&ar->conf_mutex);
}
+static void ath10k_mac_handle_beacon_iter(void *data, u8 *mac,
+ struct ieee80211_vif *vif)
+{
+ struct sk_buff *skb = data;
+ struct ieee80211_mgmt *mgmt = (void *)skb->data;
+ struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+
+ if (vif->type != NL80211_IFTYPE_STATION)
+ return;
+
+ if (!ether_addr_equal(mgmt->bssid, vif->bss_conf.bssid))
+ return;
+
+ cancel_delayed_work(&arvif->connection_loss_work);
+}
+
+void ath10k_mac_handle_beacon(struct ath10k *ar, struct sk_buff *skb)
+{
+ ieee80211_iterate_active_interfaces_atomic(ar->hw,
+ IEEE80211_IFACE_ITER_NORMAL,
+ ath10k_mac_handle_beacon_iter,
+ skb);
+}
+
+static void ath10k_mac_handle_beacon_miss_iter(void *data, u8 *mac,
+ struct ieee80211_vif *vif)
+{
+ u32 *vdev_id = data;
+ struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+ struct ath10k *ar = arvif->ar;
+ struct ieee80211_hw *hw = ar->hw;
+
+ if (arvif->vdev_id != *vdev_id)
+ return;
+
+ if (!arvif->is_up)
+ return;
+
+ ieee80211_beacon_loss(vif);
+
+ /* Firmware doesn't report beacon loss events repeatedly. If AP probe
+ * (done by mac80211) succeeds but beacons do not resume then it
+ * doesn't make sense to continue operation. Queue connection loss work
+ * which can be cancelled when beacon is received.
+ */
+ ieee80211_queue_delayed_work(hw, &arvif->connection_loss_work,
+ ATH10K_CONNECTION_LOSS_HZ);
+}
+
+void ath10k_mac_handle_beacon_miss(struct ath10k *ar, u32 vdev_id)
+{
+ ieee80211_iterate_active_interfaces_atomic(ar->hw,
+ IEEE80211_IFACE_ITER_NORMAL,
+ ath10k_mac_handle_beacon_miss_iter,
+ &vdev_id);
+}
+
+static void ath10k_mac_vif_sta_connection_loss_work(struct work_struct *work)
+{
+ struct ath10k_vif *arvif = container_of(work, struct ath10k_vif,
+ connection_loss_work.work);
+ struct ieee80211_vif *vif = arvif->vif;
+
+ if (!arvif->is_up)
+ return;
+
+ ieee80211_connection_loss(vif);
+}
+
/**********************/
/* Station management */
/**********************/
@@ -2140,6 +2209,8 @@
}
arvif->is_up = false;
+
+ cancel_delayed_work_sync(&arvif->connection_loss_work);
}
static int ath10k_station_assoc(struct ath10k *ar,
@@ -3378,6 +3449,8 @@
INIT_LIST_HEAD(&arvif->list);
INIT_WORK(&arvif->ap_csa_work, ath10k_mac_vif_ap_csa_work);
+ INIT_DELAYED_WORK(&arvif->connection_loss_work,
+ ath10k_mac_vif_sta_connection_loss_work);
if (ar->free_vdev_map == 0) {
ath10k_warn(ar, "Free vdev map is empty, no more interfaces allowed.\n");
@@ -3596,6 +3669,7 @@
int ret;
cancel_work_sync(&arvif->ap_csa_work);
+ cancel_delayed_work_sync(&arvif->connection_loss_work);
mutex_lock(&ar->conf_mutex);
@@ -5727,7 +5801,8 @@
IEEE80211_HW_HAS_RATE_CONTROL |
IEEE80211_HW_AP_LINK_PS |
IEEE80211_HW_SPECTRUM_MGMT |
- IEEE80211_HW_SW_CRYPTO_CONTROL;
+ IEEE80211_HW_SW_CRYPTO_CONTROL |
+ IEEE80211_HW_CONNECTION_MONITOR;
ar->hw->wiphy->features |= NL80211_FEATURE_STATIC_SMPS;
diff --git a/drivers/net/wireless/ath/ath10k/mac.h b/drivers/net/wireless/ath/ath10k/mac.h
index 6829611..3b64d99 100644
--- a/drivers/net/wireless/ath/ath10k/mac.h
+++ b/drivers/net/wireless/ath/ath10k/mac.h
@@ -45,6 +45,8 @@
void ath10k_drain_tx(struct ath10k *ar);
bool ath10k_mac_is_peer_wep_key_set(struct ath10k *ar, const u8 *addr,
u8 keyidx);
+void ath10k_mac_handle_beacon(struct ath10k *ar, struct sk_buff *skb);
+void ath10k_mac_handle_beacon_miss(struct ath10k *ar, u32 vdev_id);
static inline struct ath10k_vif *ath10k_vif_to_arvif(struct ieee80211_vif *vif)
{
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 58719d8..54430a1 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -1586,6 +1586,9 @@
}
}
+ if (ieee80211_is_beacon(hdr->frame_control))
+ ath10k_mac_handle_beacon(ar, skb);
+
ath10k_dbg(ar, ATH10K_DBG_MGMT,
"event mgmt rx skb %p len %d ftype %02x stype %02x\n",
skb, skb->len,
@@ -2815,8 +2818,10 @@
reason, vdev_id);
switch (reason) {
- case WMI_ROAM_REASON_BETTER_AP:
case WMI_ROAM_REASON_BEACON_MISS:
+ ath10k_mac_handle_beacon_miss(ar, vdev_id);
+ break;
+ case WMI_ROAM_REASON_BETTER_AP:
case WMI_ROAM_REASON_LOW_RSSI:
case WMI_ROAM_REASON_SUITABLE_AP_FOUND:
case WMI_ROAM_REASON_HO_FAILED: