wext: Emit event stream entries correctly when compat.
Three major portions to this change:
1) Add IW_EV_COMPAT_LCP_LEN, IW_EV_COMPAT_POINT_OFF,
and IW_EV_COMPAT_POINT_LEN helper defines.
2) Delete iw_stream_check_add_*(), they are unused.
3) Add iw_request_info argument to iwe_stream_add_*(), and use it to
size the event and pointer lengths correctly depending upon whether
IW_REQUEST_FLAG_COMPAT is set or not.
4) The mechanical transformations to the drivers and wireless stack
bits to get the iw_request_info passed down into the routines
modified in #3. Also, explicit references to IW_EV_LCP_LEN are
replaced with iwe_stream_lcp_len(info).
With a lot of help and bug fixes from Masakazu Mokuno.
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/wireless/hostap/hostap_ap.c b/drivers/net/wireless/hostap/hostap_ap.c
index 0acd958..06b23df 100644
--- a/drivers/net/wireless/hostap/hostap_ap.c
+++ b/drivers/net/wireless/hostap/hostap_ap.c
@@ -2420,7 +2420,8 @@
/* Translate our list of Access Points & Stations to a card independant
* format that the Wireless Tools will understand - Jean II */
-int prism2_ap_translate_scan(struct net_device *dev, char *buffer)
+int prism2_ap_translate_scan(struct net_device *dev,
+ struct iw_request_info *info, char *buffer)
{
struct hostap_interface *iface;
local_info_t *local;
@@ -2449,8 +2450,8 @@
iwe.u.ap_addr.sa_family = ARPHRD_ETHER;
memcpy(iwe.u.ap_addr.sa_data, sta->addr, ETH_ALEN);
iwe.len = IW_EV_ADDR_LEN;
- current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe,
- IW_EV_ADDR_LEN);
+ current_ev = iwe_stream_add_event(info, current_ev, end_buf,
+ &iwe, IW_EV_ADDR_LEN);
/* Use the mode to indicate if it's a station or
* an Access Point */
@@ -2461,8 +2462,8 @@
else
iwe.u.mode = IW_MODE_INFRA;
iwe.len = IW_EV_UINT_LEN;
- current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe,
- IW_EV_UINT_LEN);
+ current_ev = iwe_stream_add_event(info, current_ev, end_buf,
+ &iwe, IW_EV_UINT_LEN);
/* Some quality */
memset(&iwe, 0, sizeof(iwe));
@@ -2477,8 +2478,8 @@
iwe.u.qual.noise = HFA384X_LEVEL_TO_dBm(sta->last_rx_silence);
iwe.u.qual.updated = sta->last_rx_updated;
iwe.len = IW_EV_QUAL_LEN;
- current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe,
- IW_EV_QUAL_LEN);
+ current_ev = iwe_stream_add_event(info, current_ev, end_buf,
+ &iwe, IW_EV_QUAL_LEN);
#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT
if (sta->ap) {
@@ -2486,8 +2487,8 @@
iwe.cmd = SIOCGIWESSID;
iwe.u.data.length = sta->u.ap.ssid_len;
iwe.u.data.flags = 1;
- current_ev = iwe_stream_add_point(current_ev, end_buf,
- &iwe,
+ current_ev = iwe_stream_add_point(info, current_ev,
+ end_buf, &iwe,
sta->u.ap.ssid);
memset(&iwe, 0, sizeof(iwe));
@@ -2497,10 +2498,9 @@
IW_ENCODE_ENABLED | IW_ENCODE_NOKEY;
else
iwe.u.data.flags = IW_ENCODE_DISABLED;
- current_ev = iwe_stream_add_point(current_ev, end_buf,
- &iwe,
- sta->u.ap.ssid
- /* 0 byte memcpy */);
+ current_ev = iwe_stream_add_point(info, current_ev,
+ end_buf, &iwe,
+ sta->u.ap.ssid);
if (sta->u.ap.channel > 0 &&
sta->u.ap.channel <= FREQ_COUNT) {
@@ -2510,7 +2510,7 @@
* 100000;
iwe.u.freq.e = 1;
current_ev = iwe_stream_add_event(
- current_ev, end_buf, &iwe,
+ info, current_ev, end_buf, &iwe,
IW_EV_FREQ_LEN);
}
@@ -2519,8 +2519,8 @@
sprintf(buf, "beacon_interval=%d",
sta->listen_interval);
iwe.u.data.length = strlen(buf);
- current_ev = iwe_stream_add_point(current_ev, end_buf,
- &iwe, buf);
+ current_ev = iwe_stream_add_point(info, current_ev,
+ end_buf, &iwe, buf);
}
#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */