rtc: jz4740: Add support for the RTC in the jz4780 SoC
The RTC unit present in the JZ4780 works mostly the same as the one in
the JZ4740. The major difference is that register writes need to be
explicitly enabled, by writing a magic code (0xA55A) to a "write
enable" register before each access.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Maarten ter Huurne <maarten@treewalker.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 4cbea34..1d0ae30 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -1550,10 +1550,10 @@
config RTC_DRV_JZ4740
tristate "Ingenic JZ4740 SoC"
- depends on MACH_JZ4740 || COMPILE_TEST
+ depends on MACH_INGENIC || COMPILE_TEST
help
- If you say yes here you get support for the Ingenic JZ4740 SoC RTC
- controller.
+ If you say yes here you get support for the Ingenic JZ47xx SoCs RTC
+ controllers.
This driver can also be buillt as a module. If so, the module
will be called rtc-jz4740.
diff --git a/drivers/rtc/rtc-jz4740.c b/drivers/rtc/rtc-jz4740.c
index 5e14651..7ad2d79 100644
--- a/drivers/rtc/rtc-jz4740.c
+++ b/drivers/rtc/rtc-jz4740.c
@@ -29,6 +29,10 @@
#define JZ_REG_RTC_HIBERNATE 0x20
#define JZ_REG_RTC_SCRATCHPAD 0x34
+/* The following are present on the jz4780 */
+#define JZ_REG_RTC_WENR 0x3C
+#define JZ_RTC_WENR_WEN BIT(31)
+
#define JZ_RTC_CTRL_WRDY BIT(7)
#define JZ_RTC_CTRL_1HZ BIT(6)
#define JZ_RTC_CTRL_1HZ_IRQ BIT(5)
@@ -37,8 +41,17 @@
#define JZ_RTC_CTRL_AE BIT(2)
#define JZ_RTC_CTRL_ENABLE BIT(0)
+/* Magic value to enable writes on jz4780 */
+#define JZ_RTC_WENR_MAGIC 0xA55A
+
+enum jz4740_rtc_type {
+ ID_JZ4740,
+ ID_JZ4780,
+};
+
struct jz4740_rtc {
void __iomem *base;
+ enum jz4740_rtc_type type;
struct rtc_device *rtc;
@@ -64,11 +77,33 @@
return timeout ? 0 : -EIO;
}
+static inline int jz4780_rtc_enable_write(struct jz4740_rtc *rtc)
+{
+ uint32_t ctrl;
+ int ret, timeout = 1000;
+
+ ret = jz4740_rtc_wait_write_ready(rtc);
+ if (ret != 0)
+ return ret;
+
+ writel(JZ_RTC_WENR_MAGIC, rtc->base + JZ_REG_RTC_WENR);
+
+ do {
+ ctrl = readl(rtc->base + JZ_REG_RTC_WENR);
+ } while (!(ctrl & JZ_RTC_WENR_WEN) && --timeout);
+
+ return timeout ? 0 : -EIO;
+}
+
static inline int jz4740_rtc_reg_write(struct jz4740_rtc *rtc, size_t reg,
uint32_t val)
{
- int ret;
- ret = jz4740_rtc_wait_write_ready(rtc);
+ int ret = 0;
+
+ if (rtc->type >= ID_JZ4780)
+ ret = jz4780_rtc_enable_write(rtc);
+ if (ret == 0)
+ ret = jz4740_rtc_wait_write_ready(rtc);
if (ret == 0)
writel(val, rtc->base + reg);
@@ -216,11 +251,14 @@
struct jz4740_rtc *rtc;
uint32_t scratchpad;
struct resource *mem;
+ const struct platform_device_id *id = platform_get_device_id(pdev);
rtc = devm_kzalloc(&pdev->dev, sizeof(*rtc), GFP_KERNEL);
if (!rtc)
return -ENOMEM;
+ rtc->type = id->driver_data;
+
rtc->irq = platform_get_irq(pdev, 0);
if (rtc->irq < 0) {
dev_err(&pdev->dev, "Failed to get platform irq\n");
@@ -295,12 +333,20 @@
#define JZ4740_RTC_PM_OPS NULL
#endif /* CONFIG_PM */
+static const struct platform_device_id jz4740_rtc_ids[] = {
+ { "jz4740-rtc", ID_JZ4740 },
+ { "jz4780-rtc", ID_JZ4780 },
+ {}
+};
+MODULE_DEVICE_TABLE(platform, jz4740_rtc_ids);
+
static struct platform_driver jz4740_rtc_driver = {
.probe = jz4740_rtc_probe,
.driver = {
.name = "jz4740-rtc",
.pm = JZ4740_RTC_PM_OPS,
},
+ .id_table = jz4740_rtc_ids,
};
module_platform_driver(jz4740_rtc_driver);