sfp: add sfp-bus to bridge between network devices and sfp cages
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index af61d7d..02082f4 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -21,6 +21,7 @@
#include <linux/spinlock.h>
#include <linux/workqueue.h>
+#include "sfp.h"
#include "swphy.h"
#define SUPPORTED_INTERFACES \
@@ -32,6 +33,7 @@
enum {
PHYLINK_DISABLE_STOPPED,
+ PHYLINK_DISABLE_LINK,
};
struct phylink {
@@ -54,6 +56,8 @@ struct phylink {
struct work_struct resolve;
bool mac_link_dropped;
+
+ struct sfp_bus *sfp_bus;
};
static inline void linkmode_zero(unsigned long *dst)
@@ -466,6 +470,24 @@ static void phylink_run_resolve(struct phylink *pl)
queue_work(system_power_efficient_wq, &pl->resolve);
}
+static const struct sfp_upstream_ops sfp_phylink_ops;
+
+static int phylink_register_sfp(struct phylink *pl, struct device_node *np)
+{
+ struct device_node *sfp_np;
+
+ sfp_np = of_parse_phandle(np, "sfp", 0);
+ if (!sfp_np)
+ return 0;
+
+ pl->sfp_bus = sfp_register_upstream(sfp_np, pl->netdev, pl,
+ &sfp_phylink_ops);
+ if (!pl->sfp_bus)
+ return -ENOMEM;
+
+ return 0;
+}
+
struct phylink *phylink_create(struct net_device *ndev, struct device_node *np,
phy_interface_t iface, const struct phylink_mac_ops *ops)
{
@@ -507,12 +529,21 @@ struct phylink *phylink_create(struct net_device *ndev, struct device_node *np,
}
}
+ ret = phylink_register_sfp(pl, np);
+ if (ret < 0) {
+ kfree(pl);
+ return ERR_PTR(ret);
+ }
+
return pl;
}
EXPORT_SYMBOL_GPL(phylink_create);
void phylink_destroy(struct phylink *pl)
{
+ if (pl->sfp_bus)
+ sfp_unregister_upstream(pl->sfp_bus);
+
cancel_work_sync(&pl->resolve);
kfree(pl);
}
@@ -706,6 +737,8 @@ void phylink_start(struct phylink *pl)
clear_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state);
phylink_run_resolve(pl);
+ if (pl->sfp_bus)
+ sfp_upstream_start(pl->sfp_bus);
if (pl->phydev)
phy_start(pl->phydev);
}
@@ -717,6 +750,8 @@ void phylink_stop(struct phylink *pl)
if (pl->phydev)
phy_stop(pl->phydev);
+ if (pl->sfp_bus)
+ sfp_upstream_stop(pl->sfp_bus);
set_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state);
flush_work(&pl->resolve);
@@ -1166,4 +1201,126 @@ int phylink_mii_ioctl(struct phylink *pl, struct ifreq *ifr, int cmd)
}
EXPORT_SYMBOL_GPL(phylink_mii_ioctl);
+
+
+static int phylink_sfp_module_insert(void *upstream,
+ const struct sfp_eeprom_id *id)
+{
+ struct phylink *pl = upstream;
+ __ETHTOOL_DECLARE_LINK_MODE_MASK(support) = { 0, };
+ struct phylink_link_state config;
+ phy_interface_t iface;
+ int mode, ret = 0;
+ bool changed;
+ u8 port;
+
+ sfp_parse_support(pl->sfp_bus, id, support);
+ port = sfp_parse_port(pl->sfp_bus, id, support);
+ iface = sfp_parse_interface(pl->sfp_bus, id);
+
+ WARN_ON(!lockdep_rtnl_is_held());
+
+ switch (iface) {
+ case PHY_INTERFACE_MODE_SGMII:
+ mode = MLO_AN_SGMII;
+ break;
+ case PHY_INTERFACE_MODE_1000BASEX:
+ mode = MLO_AN_8023Z;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ memset(&config, 0, sizeof(config));
+ linkmode_copy(config.advertising, support);
+ config.interface = iface;
+ config.speed = SPEED_UNKNOWN;
+ config.duplex = DUPLEX_UNKNOWN;
+ config.pause = MLO_PAUSE_AN;
+ config.an_enabled = pl->link_config.an_enabled;
+
+ /* Ignore errors if we're expecting a PHY to attach later */
+ ret = phylink_validate(pl, support, &config);
+ if (ret) {
+ netdev_err(pl->netdev, "validation of %s/%s with support %*pb failed: %d\n",
+ phylink_an_mode_str(mode), phy_modes(config.interface),
+ __ETHTOOL_LINK_MODE_MASK_NBITS, support, ret);
+ return ret;
+ }
+
+ netdev_dbg(pl->netdev, "requesting link mode %s/%s with support %*pb\n",
+ phylink_an_mode_str(mode), phy_modes(config.interface),
+ __ETHTOOL_LINK_MODE_MASK_NBITS, support);
+
+ if (mode == MLO_AN_8023Z && pl->phydev)
+ return -EINVAL;
+
+ changed = !bitmap_equal(pl->supported, support,
+ __ETHTOOL_LINK_MODE_MASK_NBITS);
+ if (changed) {
+ linkmode_copy(pl->supported, support);
+ linkmode_copy(pl->link_config.advertising, config.advertising);
+ }
+
+ if (pl->link_an_mode != mode ||
+ pl->link_config.interface != config.interface) {
+ pl->link_config.interface = config.interface;
+ pl->link_an_mode = mode;
+
+ changed = true;
+
+ netdev_info(pl->netdev, "switched to %s/%s link mode\n",
+ phylink_an_mode_str(mode),
+ phy_modes(config.interface));
+ }
+
+ pl->link_port = port;
+
+ if (changed && !test_bit(PHYLINK_DISABLE_STOPPED,
+ &pl->phylink_disable_state))
+ phylink_mac_config(pl, &pl->link_config);
+
+ return ret;
+}
+
+static void phylink_sfp_link_down(void *upstream)
+{
+ struct phylink *pl = upstream;
+
+ WARN_ON(!lockdep_rtnl_is_held());
+
+ set_bit(PHYLINK_DISABLE_LINK, &pl->phylink_disable_state);
+ flush_work(&pl->resolve);
+
+ netif_carrier_off(pl->netdev);
+}
+
+static void phylink_sfp_link_up(void *upstream)
+{
+ struct phylink *pl = upstream;
+
+ WARN_ON(!lockdep_rtnl_is_held());
+
+ clear_bit(PHYLINK_DISABLE_LINK, &pl->phylink_disable_state);
+ phylink_run_resolve(pl);
+}
+
+static int phylink_sfp_connect_phy(void *upstream, struct phy_device *phy)
+{
+ return phylink_connect_phy(upstream, phy);
+}
+
+static void phylink_sfp_disconnect_phy(void *upstream)
+{
+ phylink_disconnect_phy(upstream);
+}
+
+static const struct sfp_upstream_ops sfp_phylink_ops = {
+ .module_insert = phylink_sfp_module_insert,
+ .link_up = phylink_sfp_link_up,
+ .link_down = phylink_sfp_link_down,
+ .connect_phy = phylink_sfp_connect_phy,
+ .disconnect_phy = phylink_sfp_disconnect_phy,
+};
+
MODULE_LICENSE("GPL");