[SCSI] bnx2i: Add bnx2i iSCSI driver.
New iSCSI driver for Broadcom BNX2 devices. The driver interfaces with
the CNIC driver to access the hardware.
Signed-off-by: Anil Veerabhadrappa <anilgv@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 759e150..6a19ed9 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -354,6 +354,7 @@
http://open-iscsi.org
source "drivers/scsi/cxgb3i/Kconfig"
+source "drivers/scsi/bnx2i/Kconfig"
config SGIWD93_SCSI
tristate "SGI WD93C93 SCSI Driver"
diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
index 8795c30..25429ea 100644
--- a/drivers/scsi/Makefile
+++ b/drivers/scsi/Makefile
@@ -129,6 +129,7 @@
obj-$(CONFIG_SCSI_MVSAS) += mvsas/
obj-$(CONFIG_PS3_ROM) += ps3rom.o
obj-$(CONFIG_SCSI_CXGB3_ISCSI) += libiscsi.o libiscsi_tcp.o cxgb3i/
+obj-$(CONFIG_SCSI_BNX2_ISCSI) += libiscsi.o bnx2i/
obj-$(CONFIG_ARM) += arm/
diff --git a/drivers/scsi/bnx2i/57xx_iscsi_constants.h b/drivers/scsi/bnx2i/57xx_iscsi_constants.h
new file mode 100644
index 0000000..2fceb19
--- /dev/null
+++ b/drivers/scsi/bnx2i/57xx_iscsi_constants.h
@@ -0,0 +1,155 @@
+/* 57xx_iscsi_constants.h: Broadcom NetXtreme II iSCSI HSI
+ *
+ * Copyright (c) 2006 - 2009 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ *
+ * Written by: Anil Veerabhadrappa (anilgv@broadcom.com)
+ */
+#ifndef __57XX_ISCSI_CONSTANTS_H_
+#define __57XX_ISCSI_CONSTANTS_H_
+
+/**
+* This file defines HSI constants for the iSCSI flows
+*/
+
+/* iSCSI request op codes */
+#define ISCSI_OPCODE_CLEANUP_REQUEST (7)
+
+/* iSCSI response/messages op codes */
+#define ISCSI_OPCODE_CLEANUP_RESPONSE (0x27)
+#define ISCSI_OPCODE_NOPOUT_LOCAL_COMPLETION (0)
+
+/* iSCSI task types */
+#define ISCSI_TASK_TYPE_READ (0)
+#define ISCSI_TASK_TYPE_WRITE (1)
+#define ISCSI_TASK_TYPE_MPATH (2)
+
+/* initial CQ sequence numbers */
+#define ISCSI_INITIAL_SN (1)
+
+/* KWQ (kernel work queue) layer codes */
+#define ISCSI_KWQE_LAYER_CODE (6)
+
+/* KWQ (kernel work queue) request op codes */
+#define ISCSI_KWQE_OPCODE_OFFLOAD_CONN1 (0)
+#define ISCSI_KWQE_OPCODE_OFFLOAD_CONN2 (1)
+#define ISCSI_KWQE_OPCODE_UPDATE_CONN (2)
+#define ISCSI_KWQE_OPCODE_DESTROY_CONN (3)
+#define ISCSI_KWQE_OPCODE_INIT1 (4)
+#define ISCSI_KWQE_OPCODE_INIT2 (5)
+
+/* KCQ (kernel completion queue) response op codes */
+#define ISCSI_KCQE_OPCODE_OFFLOAD_CONN (0x10)
+#define ISCSI_KCQE_OPCODE_UPDATE_CONN (0x12)
+#define ISCSI_KCQE_OPCODE_DESTROY_CONN (0x13)
+#define ISCSI_KCQE_OPCODE_INIT (0x14)
+#define ISCSI_KCQE_OPCODE_FW_CLEAN_TASK (0x15)
+#define ISCSI_KCQE_OPCODE_TCP_RESET (0x16)
+#define ISCSI_KCQE_OPCODE_TCP_SYN (0x17)
+#define ISCSI_KCQE_OPCODE_TCP_FIN (0X18)
+#define ISCSI_KCQE_OPCODE_TCP_ERROR (0x19)
+#define ISCSI_KCQE_OPCODE_CQ_EVENT_NOTIFICATION (0x20)
+#define ISCSI_KCQE_OPCODE_ISCSI_ERROR (0x21)
+
+/* KCQ (kernel completion queue) completion status */
+#define ISCSI_KCQE_COMPLETION_STATUS_SUCCESS (0x0)
+#define ISCSI_KCQE_COMPLETION_STATUS_INVALID_OPCODE (0x1)
+#define ISCSI_KCQE_COMPLETION_STATUS_CTX_ALLOC_FAILURE (0x2)
+#define ISCSI_KCQE_COMPLETION_STATUS_CTX_FREE_FAILURE (0x3)
+#define ISCSI_KCQE_COMPLETION_STATUS_NIC_ERROR (0x4)
+
+#define ISCSI_KCQE_COMPLETION_STATUS_HDR_DIG_ERR (0x5)
+#define ISCSI_KCQE_COMPLETION_STATUS_DATA_DIG_ERR (0x6)
+
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_UNEXPECTED_OPCODE (0xa)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_OPCODE (0xb)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_AHS_LEN (0xc)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_ITT (0xd)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_STATSN (0xe)
+
+/* Response */
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_EXP_DATASN (0xf)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_PEND_R2T (0x10)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_DATA_SEG_LEN_IS_ZERO (0x2c)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_DATA_SEG_LEN_TOO_BIG (0x2d)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_0 (0x11)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_1 (0x12)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_2 (0x13)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_3 (0x14)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_4 (0x15)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_5 (0x16)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_6 (0x17)
+
+/* Data-In */
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_REMAIN_RCV_LEN (0x18)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_MAX_RCV_PDU_LEN (0x19)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_F_BIT_ZERO (0x1a)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_TTT_NOT_RSRV (0x1b)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_DATASN (0x1c)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_REMAIN_BURST_LEN (0x1d)
+
+/* R2T */
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_BUFFER_OFF (0x1f)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_LUN (0x20)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_R2TSN (0x21)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_DESIRED_DATA_TRNS_LEN_0 (0x22)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_DESIRED_DATA_TRNS_LEN_1 (0x23)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_PEND_R2T_EXCEED (0x24)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_TTT_IS_RSRV (0x25)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_MAX_BURST_LEN (0x26)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_DATA_SEG_LEN_NOT_ZERO (0x27)
+
+/* TMF */
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_REJECT_PDU_LEN (0x28)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_ASYNC_PDU_LEN (0x29)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_NOPIN_PDU_LEN (0x2a)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_PEND_R2T_IN_CLEANUP (0x2b)
+
+/* IP/TCP processing errors: */
+#define ISCI_KCQE_COMPLETION_STATUS_TCP_ERROR_IP_FRAGMENT (0x40)
+#define ISCI_KCQE_COMPLETION_STATUS_TCP_ERROR_IP_OPTIONS (0x41)
+#define ISCI_KCQE_COMPLETION_STATUS_TCP_ERROR_URGENT_FLAG (0x42)
+#define ISCI_KCQE_COMPLETION_STATUS_TCP_ERROR_MAX_RTRANS (0x43)
+
+/* iSCSI licensing errors */
+/* general iSCSI license not installed */
+#define ISCSI_KCQE_COMPLETION_STATUS_ISCSI_NOT_SUPPORTED (0x50)
+/* additional LOM specific iSCSI license not installed */
+#define ISCSI_KCQE_COMPLETION_STATUS_LOM_ISCSI_NOT_ENABLED (0x51)
+
+/* SQ/RQ/CQ DB structure sizes */
+#define ISCSI_SQ_DB_SIZE (16)
+#define ISCSI_RQ_DB_SIZE (16)
+#define ISCSI_CQ_DB_SIZE (80)
+
+#define ISCSI_SQN_TO_NOTIFY_NOT_VALID 0xFFFF
+
+/* Page size codes (for flags field in connection offload request) */
+#define ISCSI_PAGE_SIZE_256 (0)
+#define ISCSI_PAGE_SIZE_512 (1)
+#define ISCSI_PAGE_SIZE_1K (2)
+#define ISCSI_PAGE_SIZE_2K (3)
+#define ISCSI_PAGE_SIZE_4K (4)
+#define ISCSI_PAGE_SIZE_8K (5)
+#define ISCSI_PAGE_SIZE_16K (6)
+#define ISCSI_PAGE_SIZE_32K (7)
+#define ISCSI_PAGE_SIZE_64K (8)
+#define ISCSI_PAGE_SIZE_128K (9)
+#define ISCSI_PAGE_SIZE_256K (10)
+#define ISCSI_PAGE_SIZE_512K (11)
+#define ISCSI_PAGE_SIZE_1M (12)
+#define ISCSI_PAGE_SIZE_2M (13)
+#define ISCSI_PAGE_SIZE_4M (14)
+#define ISCSI_PAGE_SIZE_8M (15)
+
+/* Iscsi PDU related defines */
+#define ISCSI_HEADER_SIZE (48)
+#define ISCSI_DIGEST_SHIFT (2)
+#define ISCSI_DIGEST_SIZE (4)
+
+#define B577XX_ISCSI_CONNECTION_TYPE 3
+
+#endif /*__57XX_ISCSI_CONSTANTS_H_ */
diff --git a/drivers/scsi/bnx2i/57xx_iscsi_hsi.h b/drivers/scsi/bnx2i/57xx_iscsi_hsi.h
new file mode 100644
index 0000000..36af1af
--- /dev/null
+++ b/drivers/scsi/bnx2i/57xx_iscsi_hsi.h
@@ -0,0 +1,1509 @@
+/* 57xx_iscsi_hsi.h: Broadcom NetXtreme II iSCSI HSI.
+ *
+ * Copyright (c) 2006 - 2009 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ *
+ * Written by: Anil Veerabhadrappa (anilgv@broadcom.com)
+ */
+#ifndef __57XX_ISCSI_HSI_LINUX_LE__
+#define __57XX_ISCSI_HSI_LINUX_LE__
+
+/*
+ * iSCSI Async CQE
+ */
+struct bnx2i_async_msg {
+#if defined(__BIG_ENDIAN)
+ u8 op_code;
+ u8 reserved1;
+ u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+ u16 reserved0;
+ u8 reserved1;
+ u8 op_code;
+#endif
+ u32 reserved2;
+ u32 exp_cmd_sn;
+ u32 max_cmd_sn;
+ u32 reserved3[2];
+#if defined(__BIG_ENDIAN)
+ u16 reserved5;
+ u8 err_code;
+ u8 reserved4;
+#elif defined(__LITTLE_ENDIAN)
+ u8 reserved4;
+ u8 err_code;
+ u16 reserved5;
+#endif
+ u32 reserved6;
+ u32 lun[2];
+#if defined(__BIG_ENDIAN)
+ u8 async_event;
+ u8 async_vcode;
+ u16 param1;
+#elif defined(__LITTLE_ENDIAN)
+ u16 param1;
+ u8 async_vcode;
+ u8 async_event;
+#endif
+#if defined(__BIG_ENDIAN)
+ u16 param2;
+ u16 param3;
+#elif defined(__LITTLE_ENDIAN)
+ u16 param3;
+ u16 param2;
+#endif
+ u32 reserved7[3];
+ u32 cq_req_sn;
+};
+
+
+/*
+ * iSCSI Buffer Descriptor (BD)
+ */
+struct iscsi_bd {
+ u32 buffer_addr_hi;
+ u32 buffer_addr_lo;
+#if defined(__BIG_ENDIAN)
+ u16 reserved0;
+ u16 buffer_length;
+#elif defined(__LITTLE_ENDIAN)
+ u16 buffer_length;
+ u16 reserved0;
+#endif
+#if defined(__BIG_ENDIAN)
+ u16 reserved3;
+ u16 flags;
+#define ISCSI_BD_RESERVED1 (0x3F<<0)
+#define ISCSI_BD_RESERVED1_SHIFT 0
+#define ISCSI_BD_LAST_IN_BD_CHAIN (0x1<<6)
+#define ISCSI_BD_LAST_IN_BD_CHAIN_SHIFT 6
+#define ISCSI_BD_FIRST_IN_BD_CHAIN (0x1<<7)
+#define ISCSI_BD_FIRST_IN_BD_CHAIN_SHIFT 7
+#define ISCSI_BD_RESERVED2 (0xFF<<8)
+#define ISCSI_BD_RESERVED2_SHIFT 8
+#elif defined(__LITTLE_ENDIAN)
+ u16 flags;
+#define ISCSI_BD_RESERVED1 (0x3F<<0)
+#define ISCSI_BD_RESERVED1_SHIFT 0
+#define ISCSI_BD_LAST_IN_BD_CHAIN (0x1<<6)
+#define ISCSI_BD_LAST_IN_BD_CHAIN_SHIFT 6
+#define ISCSI_BD_FIRST_IN_BD_CHAIN (0x1<<7)
+#define ISCSI_BD_FIRST_IN_BD_CHAIN_SHIFT 7
+#define ISCSI_BD_RESERVED2 (0xFF<<8)
+#define ISCSI_BD_RESERVED2_SHIFT 8
+ u16 reserved3;
+#endif
+};
+
+
+/*
+ * iSCSI Cleanup SQ WQE
+ */
+struct bnx2i_cleanup_request {
+#if defined(__BIG_ENDIAN)
+ u8 op_code;
+ u8 reserved1;
+ u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+ u16 reserved0;
+ u8 reserved1;
+ u8 op_code;
+#endif
+ u32 reserved2[3];
+#if defined(__BIG_ENDIAN)
+ u16 reserved3;
+ u16 itt;
+#define ISCSI_CLEANUP_REQUEST_INDEX (0x3FFF<<0)
+#define ISCSI_CLEANUP_REQUEST_INDEX_SHIFT 0
+#define ISCSI_CLEANUP_REQUEST_TYPE (0x3<<14)
+#define ISCSI_CLEANUP_REQUEST_TYPE_SHIFT 14
+#elif defined(__LITTLE_ENDIAN)
+ u16 itt;
+#define ISCSI_CLEANUP_REQUEST_INDEX (0x3FFF<<0)
+#define ISCSI_CLEANUP_REQUEST_INDEX_SHIFT 0
+#define ISCSI_CLEANUP_REQUEST_TYPE (0x3<<14)
+#define ISCSI_CLEANUP_REQUEST_TYPE_SHIFT 14
+ u16 reserved3;
+#endif
+ u32 reserved4[10];
+#if defined(__BIG_ENDIAN)
+ u8 cq_index;
+ u8 reserved6;
+ u16 reserved5;
+#elif defined(__LITTLE_ENDIAN)
+ u16 reserved5;
+ u8 reserved6;
+ u8 cq_index;
+#endif
+};
+
+
+/*
+ * iSCSI Cleanup CQE
+ */
+struct bnx2i_cleanup_response {
+#if defined(__BIG_ENDIAN)
+ u8 op_code;
+ u8 status;
+ u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+ u16 reserved0;
+ u8 status;
+ u8 op_code;
+#endif
+ u32 reserved1[3];
+ u32 reserved2[2];
+#if defined(__BIG_ENDIAN)
+ u16 reserved4;
+ u8 err_code;
+ u8 reserved3;
+#elif defined(__LITTLE_ENDIAN)
+ u8 reserved3;
+ u8 err_code;
+ u16 reserved4;
+#endif
+ u32 reserved5[7];
+#if defined(__BIG_ENDIAN)
+ u16 reserved6;
+ u16 itt;
+#define ISCSI_CLEANUP_RESPONSE_INDEX (0x3FFF<<0)
+#define ISCSI_CLEANUP_RESPONSE_INDEX_SHIFT 0
+#define ISCSI_CLEANUP_RESPONSE_TYPE (0x3<<14)
+#define ISCSI_CLEANUP_RESPONSE_TYPE_SHIFT 14
+#elif defined(__LITTLE_ENDIAN)
+ u16 itt;
+#define ISCSI_CLEANUP_RESPONSE_INDEX (0x3FFF<<0)
+#define ISCSI_CLEANUP_RESPONSE_INDEX_SHIFT 0
+#define ISCSI_CLEANUP_RESPONSE_TYPE (0x3<<14)
+#define ISCSI_CLEANUP_RESPONSE_TYPE_SHIFT 14
+ u16 reserved6;
+#endif
+ u32 cq_req_sn;
+};
+
+
+/*
+ * SCSI read/write SQ WQE
+ */
+struct bnx2i_cmd_request {
+#if defined(__BIG_ENDIAN)
+ u8 op_code;
+ u8 op_attr;
+#define ISCSI_CMD_REQUEST_TASK_ATTR (0x7<<0)
+#define ISCSI_CMD_REQUEST_TASK_ATTR_SHIFT 0
+#define ISCSI_CMD_REQUEST_RESERVED1 (0x3<<3)
+#define ISCSI_CMD_REQUEST_RESERVED1_SHIFT 3
+#define ISCSI_CMD_REQUEST_WRITE (0x1<<5)
+#define ISCSI_CMD_REQUEST_WRITE_SHIFT 5
+#define ISCSI_CMD_REQUEST_READ (0x1<<6)
+#define ISCSI_CMD_REQUEST_READ_SHIFT 6
+#define ISCSI_CMD_REQUEST_FINAL (0x1<<7)
+#define ISCSI_CMD_REQUEST_FINAL_SHIFT 7
+ u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+ u16 reserved0;
+ u8 op_attr;
+#define ISCSI_CMD_REQUEST_TASK_ATTR (0x7<<0)
+#define ISCSI_CMD_REQUEST_TASK_ATTR_SHIFT 0
+#define ISCSI_CMD_REQUEST_RESERVED1 (0x3<<3)
+#define ISCSI_CMD_REQUEST_RESERVED1_SHIFT 3
+#define ISCSI_CMD_REQUEST_WRITE (0x1<<5)
+#define ISCSI_CMD_REQUEST_WRITE_SHIFT 5
+#define ISCSI_CMD_REQUEST_READ (0x1<<6)
+#define ISCSI_CMD_REQUEST_READ_SHIFT 6
+#define ISCSI_CMD_REQUEST_FINAL (0x1<<7)
+#define ISCSI_CMD_REQUEST_FINAL_SHIFT 7
+ u8 op_code;
+#endif
+#if defined(__BIG_ENDIAN)
+ u16 ud_buffer_offset;
+ u16 sd_buffer_offset;
+#elif defined(__LITTLE_ENDIAN)
+ u16 sd_buffer_offset;
+ u16 ud_buffer_offset;
+#endif
+ u32 lun[2];
+#if defined(__BIG_ENDIAN)
+ u16 reserved2;
+ u16 itt;
+#define ISCSI_CMD_REQUEST_INDEX (0x3FFF<<0)
+#define ISCSI_CMD_REQUEST_INDEX_SHIFT 0
+#define ISCSI_CMD_REQUEST_TYPE (0x3<<14)
+#define ISCSI_CMD_REQUEST_TYPE_SHIFT 14
+#elif defined(__LITTLE_ENDIAN)
+ u16 itt;
+#define ISCSI_CMD_REQUEST_INDEX (0x3FFF<<0)
+#define ISCSI_CMD_REQUEST_INDEX_SHIFT 0
+#define ISCSI_CMD_REQUEST_TYPE (0x3<<14)
+#define ISCSI_CMD_REQUEST_TYPE_SHIFT 14
+ u16 reserved2;
+#endif
+ u32 total_data_transfer_length;
+ u32 cmd_sn;
+ u32 reserved3;
+ u32 cdb[4];
+ u32 zero_fill;
+ u32 bd_list_addr_lo;
+ u32 bd_list_addr_hi;
+#if defined(__BIG_ENDIAN)
+ u8 cq_index;
+ u8 sd_start_bd_index;
+ u8 ud_start_bd_index;
+ u8 num_bds;
+#elif defined(__LITTLE_ENDIAN)
+ u8 num_bds;
+ u8 ud_start_bd_index;
+ u8 sd_start_bd_index;
+ u8 cq_index;
+#endif
+};
+
+
+/*
+ * task statistics for write response
+ */
+struct bnx2i_write_resp_task_stat {
+ u32 num_data_ins;
+};
+
+/*
+ * task statistics for read response
+ */
+struct bnx2i_read_resp_task_stat {
+#if defined(__BIG_ENDIAN)
+ u16 num_data_outs;
+ u16 num_r2ts;
+#elif defined(__LITTLE_ENDIAN)
+ u16 num_r2ts;
+ u16 num_data_outs;
+#endif
+};
+
+/*
+ * task statistics for iSCSI cmd response
+ */
+union bnx2i_cmd_resp_task_stat {
+ struct bnx2i_write_resp_task_stat write_stat;
+ struct bnx2i_read_resp_task_stat read_stat;
+};
+
+/*
+ * SCSI Command CQE
+ */
+struct bnx2i_cmd_response {
+#if defined(__BIG_ENDIAN)
+ u8 op_code;
+ u8 response_flags;
+#define ISCSI_CMD_RESPONSE_RESERVED0 (0x1<<0)
+#define ISCSI_CMD_RESPONSE_RESERVED0_SHIFT 0
+#define ISCSI_CMD_RESPONSE_RESIDUAL_UNDERFLOW (0x1<<1)
+#define ISCSI_CMD_RESPONSE_RESIDUAL_UNDERFLOW_SHIFT 1
+#define ISCSI_CMD_RESPONSE_RESIDUAL_OVERFLOW (0x1<<2)
+#define ISCSI_CMD_RESPONSE_RESIDUAL_OVERFLOW_SHIFT 2
+#define ISCSI_CMD_RESPONSE_BR_RESIDUAL_UNDERFLOW (0x1<<3)
+#define ISCSI_CMD_RESPONSE_BR_RESIDUAL_UNDERFLOW_SHIFT 3
+#define ISCSI_CMD_RESPONSE_BR_RESIDUAL_OVERFLOW (0x1<<4)
+#define ISCSI_CMD_RESPONSE_BR_RESIDUAL_OVERFLOW_SHIFT 4
+#define ISCSI_CMD_RESPONSE_RESERVED1 (0x7<<5)
+#define ISCSI_CMD_RESPONSE_RESERVED1_SHIFT 5
+ u8 response;
+ u8 status;
+#elif defined(__LITTLE_ENDIAN)
+ u8 status;
+ u8 response;
+ u8 response_flags;
+#define ISCSI_CMD_RESPONSE_RESERVED0 (0x1<<0)
+#define ISCSI_CMD_RESPONSE_RESERVED0_SHIFT 0
+#define ISCSI_CMD_RESPONSE_RESIDUAL_UNDERFLOW (0x1<<1)
+#define ISCSI_CMD_RESPONSE_RESIDUAL_UNDERFLOW_SHIFT 1
+#define ISCSI_CMD_RESPONSE_RESIDUAL_OVERFLOW (0x1<<2)
+#define ISCSI_CMD_RESPONSE_RESIDUAL_OVERFLOW_SHIFT 2
+#define ISCSI_CMD_RESPONSE_BR_RESIDUAL_UNDERFLOW (0x1<<3)
+#define ISCSI_CMD_RESPONSE_BR_RESIDUAL_UNDERFLOW_SHIFT 3
+#define ISCSI_CMD_RESPONSE_BR_RESIDUAL_OVERFLOW (0x1<<4)
+#define ISCSI_CMD_RESPONSE_BR_RESIDUAL_OVERFLOW_SHIFT 4
+#define ISCSI_CMD_RESPONSE_RESERVED1 (0x7<<5)
+#define ISCSI_CMD_RESPONSE_RESERVED1_SHIFT 5
+ u8 op_code;
+#endif
+ u32 data_length;
+ u32 exp_cmd_sn;
+ u32 max_cmd_sn;
+ u32 reserved2;
+ u32 residual_count;
+#if defined(__BIG_ENDIAN)
+ u16 reserved4;
+ u8 err_code;
+ u8 reserved3;
+#elif defined(__LITTLE_ENDIAN)
+ u8 reserved3;
+ u8 err_code;
+ u16 reserved4;
+#endif
+ u32 reserved5[5];
+ union bnx2i_cmd_resp_task_stat task_stat;
+ u32 reserved6;
+#if defined(__BIG_ENDIAN)
+ u16 reserved7;
+ u16 itt;
+#define ISCSI_CMD_RESPONSE_INDEX (0x3FFF<<0)
+#define ISCSI_CMD_RESPONSE_INDEX_SHIFT 0
+#define ISCSI_CMD_RESPONSE_TYPE (0x3<<14)
+#define ISCSI_CMD_RESPONSE_TYPE_SHIFT 14
+#elif defined(__LITTLE_ENDIAN)
+ u16 itt;
+#define ISCSI_CMD_RESPONSE_INDEX (0x3FFF<<0)
+#define ISCSI_CMD_RESPONSE_INDEX_SHIFT 0
+#define ISCSI_CMD_RESPONSE_TYPE (0x3<<14)
+#define ISCSI_CMD_RESPONSE_TYPE_SHIFT 14
+ u16 reserved7;
+#endif
+ u32 cq_req_sn;
+};
+
+
+
+/*
+ * firmware middle-path request SQ WQE
+ */
+struct bnx2i_fw_mp_request {
+#if defined(__BIG_ENDIAN)
+ u8 op_code;
+ u8 op_attr;
+ u16 hdr_opaque1;
+#elif defined(__LITTLE_ENDIAN)
+ u16 hdr_opaque1;
+ u8 op_attr;
+ u8 op_code;
+#endif
+ u32 data_length;
+ u32 hdr_opaque2[2];
+#if defined(__BIG_ENDIAN)
+ u16 reserved0;
+ u16 itt;
+#define ISCSI_FW_MP_REQUEST_INDEX (0x3FFF<<0)
+#define ISCSI_FW_MP_REQUEST_INDEX_SHIFT 0
+#define ISCSI_FW_MP_REQUEST_TYPE (0x3<<14)
+#define ISCSI_FW_MP_REQUEST_TYPE_SHIFT 14
+#elif defined(__LITTLE_ENDIAN)
+ u16 itt;
+#define ISCSI_FW_MP_REQUEST_INDEX (0x3FFF<<0)
+#define ISCSI_FW_MP_REQUEST_INDEX_SHIFT 0
+#define ISCSI_FW_MP_REQUEST_TYPE (0x3<<14)
+#define ISCSI_FW_MP_REQUEST_TYPE_SHIFT 14
+ u16 reserved0;
+#endif
+ u32 hdr_opaque3[4];
+ u32 resp_bd_list_addr_lo;
+ u32 resp_bd_list_addr_hi;
+ u32 resp_buffer;
+#define ISCSI_FW_MP_REQUEST_RESP_BUFFER_LENGTH (0xFFFFFF<<0)
+#define ISCSI_FW_MP_REQUEST_RESP_BUFFER_LENGTH_SHIFT 0
+#define ISCSI_FW_MP_REQUEST_NUM_RESP_BDS (0xFF<<24)
+#define ISCSI_FW_MP_REQUEST_NUM_RESP_BDS_SHIFT 24
+#if defined(__BIG_ENDIAN)
+ u16 reserved4;
+ u8 reserved3;
+ u8 flags;
+#define ISCSI_FW_MP_REQUEST_RESERVED1 (0x1<<0)
+#define ISCSI_FW_MP_REQUEST_RESERVED1_SHIFT 0
+#define ISCSI_FW_MP_REQUEST_LOCAL_COMPLETION (0x1<<1)
+#define ISCSI_FW_MP_REQUEST_LOCAL_COMPLETION_SHIFT 1
+#define ISCSI_FW_MP_REQUEST_UPDATE_EXP_STAT_SN (0x1<<2)
+#define ISCSI_FW_MP_REQUEST_UPDATE_EXP_STAT_SN_SHIFT 2
+#define ISCSI_FW_MP_REQUEST_RESERVED2 (0x1F<<3)
+#define ISCSI_FW_MP_REQUEST_RESERVED2_SHIFT 3
+#elif defined(__LITTLE_ENDIAN)
+ u8 flags;
+#define ISCSI_FW_MP_REQUEST_RESERVED1 (0x1<<0)
+#define ISCSI_FW_MP_REQUEST_RESERVED1_SHIFT 0
+#define ISCSI_FW_MP_REQUEST_LOCAL_COMPLETION (0x1<<1)
+#define ISCSI_FW_MP_REQUEST_LOCAL_COMPLETION_SHIFT 1
+#define ISCSI_FW_MP_REQUEST_UPDATE_EXP_STAT_SN (0x1<<2)
+#define ISCSI_FW_MP_REQUEST_UPDATE_EXP_STAT_SN_SHIFT 2
+#define ISCSI_FW_MP_REQUEST_RESERVED2 (0x1F<<3)
+#define ISCSI_FW_MP_REQUEST_RESERVED2_SHIFT 3
+ u8 reserved3;
+ u16 reserved4;
+#endif
+ u32 bd_list_addr_lo;
+ u32 bd_list_addr_hi;
+#if defined(__BIG_ENDIAN)
+ u8 cq_index;
+ u8 reserved6;
+ u8 reserved5;
+ u8 num_bds;
+#elif defined(__LITTLE_ENDIAN)
+ u8 num_bds;
+ u8 reserved5;
+ u8 reserved6;
+ u8 cq_index;
+#endif
+};
+
+
+/*
+ * firmware response - CQE: used only by firmware
+ */
+struct bnx2i_fw_response {
+ u32 hdr_dword1[2];
+ u32 hdr_exp_cmd_sn;
+ u32 hdr_max_cmd_sn;
+ u32 hdr_ttt;
+ u32 hdr_res_cnt;
+ u32 cqe_flags;
+#define ISCSI_FW_RESPONSE_RESERVED2 (0xFF<<0)
+#define ISCSI_FW_RESPONSE_RESERVED2_SHIFT 0
+#define ISCSI_FW_RESPONSE_ERR_CODE (0xFF<<8)
+#define ISCSI_FW_RESPONSE_ERR_CODE_SHIFT 8
+#define ISCSI_FW_RESPONSE_RESERVED3 (0xFFFF<<16)
+#define ISCSI_FW_RESPONSE_RESERVED3_SHIFT 16
+ u32 stat_sn;
+ u32 hdr_dword2[2];
+ u32 hdr_dword3[2];
+ u32 task_stat;
+ u32 reserved0;
+ u32 hdr_itt;
+ u32 cq_req_sn;
+};
+
+
+/*
+ * iSCSI KCQ CQE parameters
+ */
+union iscsi_kcqe_params {
+ u32 reserved0[4];
+};
+
+/*
+ * iSCSI KCQ CQE
+ */
+struct iscsi_kcqe {
+ u32 iscsi_conn_id;
+ u32 completion_status;
+ u32 iscsi_conn_context_id;
+ union iscsi_kcqe_params params;
+#if defined(__BIG_ENDIAN)
+ u8 flags;
+#define ISCSI_KCQE_RESERVED0 (0xF<<0)
+#define ISCSI_KCQE_RESERVED0_SHIFT 0
+#define ISCSI_KCQE_LAYER_CODE (0x7<<4)
+#define ISCSI_KCQE_LAYER_CODE_SHIFT 4
+#define ISCSI_KCQE_RESERVED1 (0x1<<7)
+#define ISCSI_KCQE_RESERVED1_SHIFT 7
+ u8 op_code;
+ u16 qe_self_seq;
+#elif defined(__LITTLE_ENDIAN)
+ u16 qe_self_seq;
+ u8 op_code;
+ u8 flags;
+#define ISCSI_KCQE_RESERVED0 (0xF<<0)
+#define ISCSI_KCQE_RESERVED0_SHIFT 0
+#define ISCSI_KCQE_LAYER_CODE (0x7<<4)
+#define ISCSI_KCQE_LAYER_CODE_SHIFT 4
+#define ISCSI_KCQE_RESERVED1 (0x1<<7)
+#define ISCSI_KCQE_RESERVED1_SHIFT 7
+#endif
+};
+
+
+
+/*
+ * iSCSI KWQE header
+ */
+struct iscsi_kwqe_header {
+#if defined(__BIG_ENDIAN)
+ u8 flags;
+#define ISCSI_KWQE_HEADER_RESERVED0 (0xF<<0)
+#define ISCSI_KWQE_HEADER_RESERVED0_SHIFT 0
+#define ISCSI_KWQE_HEADER_LAYER_CODE (0x7<<4)
+#define ISCSI_KWQE_HEADER_LAYER_CODE_SHIFT 4
+#define ISCSI_KWQE_HEADER_RESERVED1 (0x1<<7)
+#define ISCSI_KWQE_HEADER_RESERVED1_SHIFT 7
+ u8 op_code;
+#elif defined(__LITTLE_ENDIAN)
+ u8 op_code;
+ u8 flags;
+#define ISCSI_KWQE_HEADER_RESERVED0 (0xF<<0)
+#define ISCSI_KWQE_HEADER_RESERVED0_SHIFT 0
+#define ISCSI_KWQE_HEADER_LAYER_CODE (0x7<<4)
+#define ISCSI_KWQE_HEADER_LAYER_CODE_SHIFT 4
+#define ISCSI_KWQE_HEADER_RESERVED1 (0x1<<7)
+#define ISCSI_KWQE_HEADER_RESERVED1_SHIFT 7
+#endif
+};
+
+/*
+ * iSCSI firmware init request 1
+ */
+struct iscsi_kwqe_init1 {
+#if defined(__BIG_ENDIAN)
+ struct iscsi_kwqe_header hdr;
+ u8 reserved0;
+ u8 num_cqs;
+#elif defined(__LITTLE_ENDIAN)
+ u8 num_cqs;
+ u8 reserved0;
+ struct iscsi_kwqe_header hdr;
+#endif
+ u32 dummy_buffer_addr_lo;
+ u32 dummy_buffer_addr_hi;
+#if defined(__BIG_ENDIAN)
+ u16 num_ccells_per_conn;
+ u16 num_tasks_per_conn;
+#elif defined(__LITTLE_ENDIAN)
+ u16 num_tasks_per_conn;
+ u16 num_ccells_per_conn;
+#endif
+#if defined(__BIG_ENDIAN)
+ u16 sq_wqes_per_page;
+ u16 sq_num_wqes;
+#elif defined(__LITTLE_ENDIAN)
+ u16 sq_num_wqes;
+ u16 sq_wqes_per_page;
+#endif
+#if defined(__BIG_ENDIAN)
+ u8 cq_log_wqes_per_page;
+ u8 flags;
+#define ISCSI_KWQE_INIT1_PAGE_SIZE (0xF<<0)
+#define ISCSI_KWQE_INIT1_PAGE_SIZE_SHIFT 0
+#define ISCSI_KWQE_INIT1_DELAYED_ACK_ENABLE (0x1<<4)
+#define ISCSI_KWQE_INIT1_DELAYED_ACK_ENABLE_SHIFT 4
+#define ISCSI_KWQE_INIT1_KEEP_ALIVE_ENABLE (0x1<<5)
+#define ISCSI_KWQE_INIT1_KEEP_ALIVE_ENABLE_SHIFT 5
+#define ISCSI_KWQE_INIT1_RESERVED1 (0x3<<6)
+#define ISCSI_KWQE_INIT1_RESERVED1_SHIFT 6
+ u16 cq_num_wqes;
+#elif defined(__LITTLE_ENDIAN)
+ u16 cq_num_wqes;
+ u8 flags;
+#define ISCSI_KWQE_INIT1_PAGE_SIZE (0xF<<0)
+#define ISCSI_KWQE_INIT1_PAGE_SIZE_SHIFT 0
+#define ISCSI_KWQE_INIT1_DELAYED_ACK_ENABLE (0x1<<4)
+#define ISCSI_KWQE_INIT1_DELAYED_ACK_ENABLE_SHIFT 4
+#define ISCSI_KWQE_INIT1_KEEP_ALIVE_ENABLE (0x1<<5)
+#define ISCSI_KWQE_INIT1_KEEP_ALIVE_ENABLE_SHIFT 5
+#define ISCSI_KWQE_INIT1_RESERVED1 (0x3<<6)
+#define ISCSI_KWQE_INIT1_RESERVED1_SHIFT 6
+ u8 cq_log_wqes_per_page;
+#endif
+#if defined(__BIG_ENDIAN)
+ u16 cq_num_pages;
+ u16 sq_num_pages;
+#elif defined(__LITTLE_ENDIAN)
+ u16 sq_num_pages;
+ u16 cq_num_pages;
+#endif
+#if defined(__BIG_ENDIAN)
+ u16 rq_buffer_size;
+ u16 rq_num_wqes;
+#elif defined(__LITTLE_ENDIAN)
+ u16 rq_num_wqes;
+ u16 rq_buffer_size;
+#endif
+};
+
+/*
+ * iSCSI firmware init request 2
+ */
+struct iscsi_kwqe_init2 {
+#if defined(__BIG_ENDIAN)
+ struct iscsi_kwqe_header hdr;
+ u16 max_cq_sqn;
+#elif defined(__LITTLE_ENDIAN)
+ u16 max_cq_sqn;
+ struct iscsi_kwqe_header hdr;
+#endif
+ u32 error_bit_map[2];
+ u32 reserved1[5];
+};
+
+/*
+ * Initial iSCSI connection offload request 1
+ */
+struct iscsi_kwqe_conn_offload1 {
+#if defined(__BIG_ENDIAN)
+ struct iscsi_kwqe_header hdr;
+ u16 iscsi_conn_id;
+#elif defined(__LITTLE_ENDIAN)
+ u16 iscsi_conn_id;
+ struct iscsi_kwqe_header hdr;
+#endif
+ u32 sq_page_table_addr_lo;
+ u32 sq_page_table_addr_hi;
+ u32 cq_page_table_addr_lo;
+ u32 cq_page_table_addr_hi;
+ u32 reserved0[3];
+};
+
+/*
+ * iSCSI Page Table Entry (PTE)
+ */
+struct iscsi_pte {
+ u32 hi;
+ u32 lo;
+};
+
+/*
+ * Initial iSCSI connection offload request 2
+ */
+struct iscsi_kwqe_conn_offload2 {
+#if defined(__BIG_ENDIAN)
+ struct iscsi_kwqe_header hdr;
+ u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+ u16 reserved0;
+ struct iscsi_kwqe_header hdr;
+#endif
+ u32 rq_page_table_addr_lo;
+ u32 rq_page_table_addr_hi;
+ struct iscsi_pte sq_first_pte;
+ struct iscsi_pte cq_first_pte;
+ u32 num_additional_wqes;
+};
+
+
+/*
+ * Initial iSCSI connection offload request 3
+ */
+struct iscsi_kwqe_conn_offload3 {
+#if defined(__BIG_ENDIAN)
+ struct iscsi_kwqe_header hdr;
+ u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+ u16 reserved0;
+ struct iscsi_kwqe_header hdr;
+#endif
+ u32 reserved1;
+ struct iscsi_pte qp_first_pte[3];
+};
+
+
+/*
+ * iSCSI connection update request
+ */
+struct iscsi_kwqe_conn_update {
+#if defined(__BIG_ENDIAN)
+ struct iscsi_kwqe_header hdr;
+ u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+ u16 reserved0;
+ struct iscsi_kwqe_header hdr;
+#endif
+#if defined(__BIG_ENDIAN)
+ u8 session_error_recovery_level;
+ u8 max_outstanding_r2ts;
+ u8 reserved2;
+ u8 conn_flags;
+#define ISCSI_KWQE_CONN_UPDATE_HEADER_DIGEST (0x1<<0)
+#define ISCSI_KWQE_CONN_UPDATE_HEADER_DIGEST_SHIFT 0
+#define ISCSI_KWQE_CONN_UPDATE_DATA_DIGEST (0x1<<1)
+#define ISCSI_KWQE_CONN_UPDATE_DATA_DIGEST_SHIFT 1
+#define ISCSI_KWQE_CONN_UPDATE_INITIAL_R2T (0x1<<2)
+#define ISCSI_KWQE_CONN_UPDATE_INITIAL_R2T_SHIFT 2
+#define ISCSI_KWQE_CONN_UPDATE_IMMEDIATE_DATA (0x1<<3)
+#define ISCSI_KWQE_CONN_UPDATE_IMMEDIATE_DATA_SHIFT 3
+#define ISCSI_KWQE_CONN_UPDATE_RESERVED1 (0xF<<4)
+#define ISCSI_KWQE_CONN_UPDATE_RESERVED1_SHIFT 4
+#elif defined(__LITTLE_ENDIAN)
+ u8 conn_flags;
+#define ISCSI_KWQE_CONN_UPDATE_HEADER_DIGEST (0x1<<0)
+#define ISCSI_KWQE_CONN_UPDATE_HEADER_DIGEST_SHIFT 0
+#define ISCSI_KWQE_CONN_UPDATE_DATA_DIGEST (0x1<<1)
+#define ISCSI_KWQE_CONN_UPDATE_DATA_DIGEST_SHIFT 1
+#define ISCSI_KWQE_CONN_UPDATE_INITIAL_R2T (0x1<<2)
+#define ISCSI_KWQE_CONN_UPDATE_INITIAL_R2T_SHIFT 2
+#define ISCSI_KWQE_CONN_UPDATE_IMMEDIATE_DATA (0x1<<3)
+#define ISCSI_KWQE_CONN_UPDATE_IMMEDIATE_DATA_SHIFT 3
+#define ISCSI_KWQE_CONN_UPDATE_RESERVED1 (0xF<<4)
+#define ISCSI_KWQE_CONN_UPDATE_RESERVED1_SHIFT 4
+ u8 reserved2;
+ u8 max_outstanding_r2ts;
+ u8 session_error_recovery_level;
+#endif
+ u32 context_id;
+ u32 max_send_pdu_length;
+ u32 max_recv_pdu_length;
+ u32 first_burst_length;
+ u32 max_burst_length;
+ u32 exp_stat_sn;
+};
+
+/*
+ * iSCSI destroy connection request
+ */
+struct iscsi_kwqe_conn_destroy {
+#if defined(__BIG_ENDIAN)
+ struct iscsi_kwqe_header hdr;
+ u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+ u16 reserved0;
+ struct iscsi_kwqe_header hdr;
+#endif
+ u32 context_id;
+ u32 reserved1[6];
+};
+
+/*
+ * iSCSI KWQ WQE
+ */
+union iscsi_kwqe {
+ struct iscsi_kwqe_init1 init1;
+ struct iscsi_kwqe_init2 init2;
+ struct iscsi_kwqe_conn_offload1 conn_offload1;
+ struct iscsi_kwqe_conn_offload2 conn_offload2;
+ struct iscsi_kwqe_conn_update conn_update;
+ struct iscsi_kwqe_conn_destroy conn_destroy;
+};
+
+/*
+ * iSCSI Login SQ WQE
+ */
+struct bnx2i_login_request {
+#if defined(__BIG_ENDIAN)
+ u8 op_code;
+ u8 op_attr;
+#define ISCSI_LOGIN_REQUEST_NEXT_STAGE (0x3<<0)
+#define ISCSI_LOGIN_REQUEST_NEXT_STAGE_SHIFT 0
+#define ISCSI_LOGIN_REQUEST_CURRENT_STAGE (0x3<<2)
+#define ISCSI_LOGIN_REQUEST_CURRENT_STAGE_SHIFT 2
+#define ISCSI_LOGIN_REQUEST_RESERVED0 (0x3<<4)
+#define ISCSI_LOGIN_REQUEST_RESERVED0_SHIFT 4
+#define ISCSI_LOGIN_REQUEST_CONT (0x1<<6)
+#define ISCSI_LOGIN_REQUEST_CONT_SHIFT 6
+#define ISCSI_LOGIN_REQUEST_TRANSIT (0x1<<7)
+#define ISCSI_LOGIN_REQUEST_TRANSIT_SHIFT 7
+ u8 version_max;
+ u8 version_min;
+#elif defined(__LITTLE_ENDIAN)
+ u8 version_min;
+ u8 version_max;
+ u8 op_attr;
+#define ISCSI_LOGIN_REQUEST_NEXT_STAGE (0x3<<0)
+#define ISCSI_LOGIN_REQUEST_NEXT_STAGE_SHIFT 0
+#define ISCSI_LOGIN_REQUEST_CURRENT_STAGE (0x3<<2)
+#define ISCSI_LOGIN_REQUEST_CURRENT_STAGE_SHIFT 2
+#define ISCSI_LOGIN_REQUEST_RESERVED0 (0x3<<4)
+#define ISCSI_LOGIN_REQUEST_RESERVED0_SHIFT 4
+#define ISCSI_LOGIN_REQUEST_CONT (0x1<<6)
+#define ISCSI_LOGIN_REQUEST_CONT_SHIFT 6
+#define ISCSI_LOGIN_REQUEST_TRANSIT (0x1<<7)
+#define ISCSI_LOGIN_REQUEST_TRANSIT_SHIFT 7
+ u8 op_code;
+#endif
+ u32 data_length;
+ u32 isid_lo;
+#if defined(__BIG_ENDIAN)
+ u16 isid_hi;
+ u16 tsih;
+#elif defined(__LITTLE_ENDIAN)
+ u16 tsih;
+ u16 isid_hi;
+#endif
+#if defined(__BIG_ENDIAN)
+ u16 reserved2;
+ u16 itt;
+#define ISCSI_LOGIN_REQUEST_INDEX (0x3FFF<<0)
+#define ISCSI_LOGIN_REQUEST_INDEX_SHIFT 0
+#define ISCSI_LOGIN_REQUEST_TYPE (0x3<<14)
+#define ISCSI_LOGIN_REQUEST_TYPE_SHIFT 14
+#elif defined(__LITTLE_ENDIAN)
+ u16 itt;
+#define ISCSI_LOGIN_REQUEST_INDEX (0x3FFF<<0)
+#define ISCSI_LOGIN_REQUEST_INDEX_SHIFT 0
+#define ISCSI_LOGIN_REQUEST_TYPE (0x3<<14)
+#define ISCSI_LOGIN_REQUEST_TYPE_SHIFT 14
+ u16 reserved2;
+#endif
+#if defined(__BIG_ENDIAN)
+ u16 cid;
+ u16 reserved3;
+#elif defined(__LITTLE_ENDIAN)
+ u16 reserved3;
+ u16 cid;
+#endif
+ u32 cmd_sn;
+ u32 exp_stat_sn;
+ u32 reserved4;
+ u32 resp_bd_list_addr_lo;
+ u32 resp_bd_list_addr_hi;
+ u32 resp_buffer;
+#define ISCSI_LOGIN_REQUEST_RESP_BUFFER_LENGTH (0xFFFFFF<<0)
+#define ISCSI_LOGIN_REQUEST_RESP_BUFFER_LENGTH_SHIFT 0
+#define ISCSI_LOGIN_REQUEST_NUM_RESP_BDS (0xFF<<24)
+#define ISCSI_LOGIN_REQUEST_NUM_RESP_BDS_SHIFT 24
+#if defined(__BIG_ENDIAN)
+ u16 reserved8;
+ u8 reserved7;
+ u8 flags;
+#define ISCSI_LOGIN_REQUEST_RESERVED5 (0x3<<0)
+#define ISCSI_LOGIN_REQUEST_RESERVED5_SHIFT 0
+#define ISCSI_LOGIN_REQUEST_UPDATE_EXP_STAT_SN (0x1<<2)
+#define ISCSI_LOGIN_REQUEST_UPDATE_EXP_STAT_SN_SHIFT 2
+#define ISCSI_LOGIN_REQUEST_RESERVED6 (0x1F<<3)
+#define ISCSI_LOGIN_REQUEST_RESERVED6_SHIFT 3
+#elif defined(__LITTLE_ENDIAN)
+ u8 flags;
+#define ISCSI_LOGIN_REQUEST_RESERVED5 (0x3<<0)
+#define ISCSI_LOGIN_REQUEST_RESERVED5_SHIFT 0
+#define ISCSI_LOGIN_REQUEST_UPDATE_EXP_STAT_SN (0x1<<2)
+#define ISCSI_LOGIN_REQUEST_UPDATE_EXP_STAT_SN_SHIFT 2
+#define ISCSI_LOGIN_REQUEST_RESERVED6 (0x1F<<3)
+#define ISCSI_LOGIN_REQUEST_RESERVED6_SHIFT 3
+ u8 reserved7;
+ u16 reserved8;
+#endif
+ u32 bd_list_addr_lo;
+ u32 bd_list_addr_hi;
+#if defined(__BIG_ENDIAN)
+ u8 cq_index;
+ u8 reserved10;
+ u8 reserved9;
+ u8 num_bds;
+#elif defined(__LITTLE_ENDIAN)
+ u8 num_bds;
+ u8 reserved9;
+ u8 reserved10;
+ u8 cq_index;
+#endif
+};
+
+
+/*
+ * iSCSI Login CQE
+ */
+struct bnx2i_login_response {
+#if defined(__BIG_ENDIAN)
+ u8 op_code;
+ u8 response_flags;
+#define ISCSI_LOGIN_RESPONSE_NEXT_STAGE (0x3<<0)
+#define ISCSI_LOGIN_RESPONSE_NEXT_STAGE_SHIFT 0
+#define ISCSI_LOGIN_RESPONSE_CURRENT_STAGE (0x3<<2)
+#define ISCSI_LOGIN_RESPONSE_CURRENT_STAGE_SHIFT 2
+#define ISCSI_LOGIN_RESPONSE_RESERVED0 (0x3<<4)
+#define ISCSI_LOGIN_RESPONSE_RESERVED0_SHIFT 4
+#define ISCSI_LOGIN_RESPONSE_CONT (0x1<<6)
+#define ISCSI_LOGIN_RESPONSE_CONT_SHIFT 6
+#define ISCSI_LOGIN_RESPONSE_TRANSIT (0x1<<7)
+#define ISCSI_LOGIN_RESPONSE_TRANSIT_SHIFT 7
+ u8 version_max;
+ u8 version_active;
+#elif defined(__LITTLE_ENDIAN)
+ u8 version_active;
+ u8 version_max;
+ u8 response_flags;
+#define ISCSI_LOGIN_RESPONSE_NEXT_STAGE (0x3<<0)
+#define ISCSI_LOGIN_RESPONSE_NEXT_STAGE_SHIFT 0
+#define ISCSI_LOGIN_RESPONSE_CURRENT_STAGE (0x3<<2)
+#define ISCSI_LOGIN_RESPONSE_CURRENT_STAGE_SHIFT 2
+#define ISCSI_LOGIN_RESPONSE_RESERVED0 (0x3<<4)
+#define ISCSI_LOGIN_RESPONSE_RESERVED0_SHIFT 4
+#define ISCSI_LOGIN_RESPONSE_CONT (0x1<<6)
+#define ISCSI_LOGIN_RESPONSE_CONT_SHIFT 6
+#define ISCSI_LOGIN_RESPONSE_TRANSIT (0x1<<7)
+#define ISCSI_LOGIN_RESPONSE_TRANSIT_SHIFT 7
+ u8 op_code;
+#endif
+ u32 data_length;
+ u32 exp_cmd_sn;
+ u32 max_cmd_sn;
+ u32 reserved1[2];
+#if defined(__BIG_ENDIAN)
+ u16 reserved3;
+ u8 err_code;
+ u8 reserved2;
+#elif defined(__LITTLE_ENDIAN)
+ u8 reserved2;
+ u8 err_code;
+ u16 reserved3;
+#endif
+ u32 stat_sn;
+ u32 isid_lo;
+#if defined(__BIG_ENDIAN)
+ u16 isid_hi;
+ u16 tsih;
+#elif defined(__LITTLE_ENDIAN)
+ u16 tsih;
+ u16 isid_hi;
+#endif
+#if defined(__BIG_ENDIAN)
+ u8 status_class;
+ u8 status_detail;
+ u16 reserved4;
+#elif defined(__LITTLE_ENDIAN)
+ u16 reserved4;
+ u8 status_detail;
+ u8 status_class;
+#endif
+ u32 reserved5[3];
+#if defined(__BIG_ENDIAN)
+ u16 reserved6;
+ u16 itt;
+#define ISCSI_LOGIN_RESPONSE_INDEX (0x3FFF<<0)
+#define ISCSI_LOGIN_RESPONSE_INDEX_SHIFT 0
+#define ISCSI_LOGIN_RESPONSE_TYPE (0x3<<14)
+#define ISCSI_LOGIN_RESPONSE_TYPE_SHIFT 14
+#elif defined(__LITTLE_ENDIAN)
+ u16 itt;
+#define ISCSI_LOGIN_RESPONSE_INDEX (0x3FFF<<0)
+#define ISCSI_LOGIN_RESPONSE_INDEX_SHIFT 0
+#define ISCSI_LOGIN_RESPONSE_TYPE (0x3<<14)
+#define ISCSI_LOGIN_RESPONSE_TYPE_SHIFT 14
+ u16 reserved6;
+#endif
+ u32 cq_req_sn;
+};
+
+
+/*
+ * iSCSI Logout SQ WQE
+ */
+struct bnx2i_logout_request {
+#if defined(__BIG_ENDIAN)
+ u8 op_code;
+ u8 op_attr;
+#define ISCSI_LOGOUT_REQUEST_REASON (0x7F<<0)
+#define ISCSI_LOGOUT_REQUEST_REASON_SHIFT 0
+#define ISCSI_LOGOUT_REQUEST_ALWAYS_ONE (0x1<<7)
+#define ISCSI_LOGOUT_REQUEST_ALWAYS_ONE_SHIFT 7
+ u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+ u16 reserved0;
+ u8 op_attr;
+#define ISCSI_LOGOUT_REQUEST_REASON (0x7F<<0)
+#define ISCSI_LOGOUT_REQUEST_REASON_SHIFT 0
+#define ISCSI_LOGOUT_REQUEST_ALWAYS_ONE (0x1<<7)
+#define ISCSI_LOGOUT_REQUEST_ALWAYS_ONE_SHIFT 7
+ u8 op_code;
+#endif
+ u32 data_length;
+ u32 reserved1[2];
+#if defined(__BIG_ENDIAN)
+ u16 reserved2;
+ u16 itt;
+#define ISCSI_LOGOUT_REQUEST_INDEX (0x3FFF<<0)
+#define ISCSI_LOGOUT_REQUEST_INDEX_SHIFT 0
+#define ISCSI_LOGOUT_REQUEST_TYPE (0x3<<14)
+#define ISCSI_LOGOUT_REQUEST_TYPE_SHIFT 14
+#elif defined(__LITTLE_ENDIAN)
+ u16 itt;
+#define ISCSI_LOGOUT_REQUEST_INDEX (0x3FFF<<0)
+#define ISCSI_LOGOUT_REQUEST_INDEX_SHIFT 0
+#define ISCSI_LOGOUT_REQUEST_TYPE (0x3<<14)
+#define ISCSI_LOGOUT_REQUEST_TYPE_SHIFT 14
+ u16 reserved2;
+#endif
+#if defined(__BIG_ENDIAN)
+ u16 cid;
+ u16 reserved3;
+#elif defined(__LITTLE_ENDIAN)
+ u16 reserved3;
+ u16 cid;
+#endif
+ u32 cmd_sn;
+ u32 reserved4[5];
+ u32 zero_fill;
+ u32 bd_list_addr_lo;
+ u32 bd_list_addr_hi;
+#if defined(__BIG_ENDIAN)
+ u8 cq_index;
+ u8 reserved6;
+ u8 reserved5;
+ u8 num_bds;
+#elif defined(__LITTLE_ENDIAN)
+ u8 num_bds;
+ u8 reserved5;
+ u8 reserved6;
+ u8 cq_index;
+#endif
+};
+
+
+/*
+ * iSCSI Logout CQE
+ */
+struct bnx2i_logout_response {
+#if defined(__BIG_ENDIAN)
+ u8 op_code;
+ u8 reserved1;
+ u8 response;
+ u8 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+ u8 reserved0;
+ u8 response;
+ u8 reserved1;
+ u8 op_code;
+#endif
+ u32 reserved2;
+ u32 exp_cmd_sn;
+ u32 max_cmd_sn;
+ u32 reserved3[2];
+#if defined(__BIG_ENDIAN)
+ u16 reserved5;
+ u8 err_code;
+ u8 reserved4;
+#elif defined(__LITTLE_ENDIAN)
+ u8 reserved4;
+ u8 err_code;
+ u16 reserved5;
+#endif
+ u32 reserved6[3];
+#if defined(__BIG_ENDIAN)
+ u16 time_to_wait;
+ u16 time_to_retain;
+#elif defined(__LITTLE_ENDIAN)
+ u16 time_to_retain;
+ u16 time_to_wait;
+#endif
+ u32 reserved7[3];
+#if defined(__BIG_ENDIAN)
+ u16 reserved8;
+ u16 itt;
+#define ISCSI_LOGOUT_RESPONSE_INDEX (0x3FFF<<0)
+#define ISCSI_LOGOUT_RESPONSE_INDEX_SHIFT 0
+#define ISCSI_LOGOUT_RESPONSE_TYPE (0x3<<14)
+#define ISCSI_LOGOUT_RESPONSE_TYPE_SHIFT 14
+#elif defined(__LITTLE_ENDIAN)
+ u16 itt;
+#define ISCSI_LOGOUT_RESPONSE_INDEX (0x3FFF<<0)
+#define ISCSI_LOGOUT_RESPONSE_INDEX_SHIFT 0
+#define ISCSI_LOGOUT_RESPONSE_TYPE (0x3<<14)
+#define ISCSI_LOGOUT_RESPONSE_TYPE_SHIFT 14
+ u16 reserved8;
+#endif
+ u32 cq_req_sn;
+};
+
+
+/*
+ * iSCSI Nop-In CQE
+ */
+struct bnx2i_nop_in_msg {
+#if defined(__BIG_ENDIAN)
+ u8 op_code;
+ u8 reserved1;
+ u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+ u16 reserved0;
+ u8 reserved1;
+ u8 op_code;
+#endif
+ u32 data_length;
+ u32 exp_cmd_sn;
+ u32 max_cmd_sn;
+ u32 ttt;
+ u32 reserved2;
+#if defined(__BIG_ENDIAN)
+ u16 reserved4;
+ u8 err_code;
+ u8 reserved3;
+#elif defined(__LITTLE_ENDIAN)
+ u8 reserved3;
+ u8 err_code;
+ u16 reserved4;
+#endif
+ u32 reserved5;
+ u32 lun[2];
+ u32 reserved6[4];
+#if defined(__BIG_ENDIAN)
+ u16 reserved7;
+ u16 itt;
+#define ISCSI_NOP_IN_MSG_INDEX (0x3FFF<<0)
+#define ISCSI_NOP_IN_MSG_INDEX_SHIFT 0
+#define ISCSI_NOP_IN_MSG_TYPE (0x3<<14)
+#define ISCSI_NOP_IN_MSG_TYPE_SHIFT 14
+#elif defined(__LITTLE_ENDIAN)
+ u16 itt;
+#define ISCSI_NOP_IN_MSG_INDEX (0x3FFF<<0)
+#define ISCSI_NOP_IN_MSG_INDEX_SHIFT 0
+#define ISCSI_NOP_IN_MSG_TYPE (0x3<<14)
+#define ISCSI_NOP_IN_MSG_TYPE_SHIFT 14
+ u16 reserved7;
+#endif
+ u32 cq_req_sn;
+};
+
+
+/*
+ * iSCSI NOP-OUT SQ WQE
+ */
+struct bnx2i_nop_out_request {
+#if defined(__BIG_ENDIAN)
+ u8 op_code;
+ u8 op_attr;
+#define ISCSI_NOP_OUT_REQUEST_RESERVED1 (0x7F<<0)
+#define ISCSI_NOP_OUT_REQUEST_RESERVED1_SHIFT 0
+#define ISCSI_NOP_OUT_REQUEST_ALWAYS_ONE (0x1<<7)
+#define ISCSI_NOP_OUT_REQUEST_ALWAYS_ONE_SHIFT 7
+ u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+ u16 reserved0;
+ u8 op_attr;
+#define ISCSI_NOP_OUT_REQUEST_RESERVED1 (0x7F<<0)
+#define ISCSI_NOP_OUT_REQUEST_RESERVED1_SHIFT 0
+#define ISCSI_NOP_OUT_REQUEST_ALWAYS_ONE (0x1<<7)
+#define ISCSI_NOP_OUT_REQUEST_ALWAYS_ONE_SHIFT 7
+ u8 op_code;
+#endif
+ u32 data_length;
+ u32 lun[2];
+#if defined(__BIG_ENDIAN)
+ u16 reserved2;
+ u16 itt;
+#define ISCSI_NOP_OUT_REQUEST_INDEX (0x3FFF<<0)
+#define ISCSI_NOP_OUT_REQUEST_INDEX_SHIFT 0
+#define ISCSI_NOP_OUT_REQUEST_TYPE (0x3<<14)
+#define ISCSI_NOP_OUT_REQUEST_TYPE_SHIFT 14
+#elif defined(__LITTLE_ENDIAN)
+ u16 itt;
+#define ISCSI_NOP_OUT_REQUEST_INDEX (0x3FFF<<0)
+#define ISCSI_NOP_OUT_REQUEST_INDEX_SHIFT 0
+#define ISCSI_NOP_OUT_REQUEST_TYPE (0x3<<14)
+#define ISCSI_NOP_OUT_REQUEST_TYPE_SHIFT 14
+ u16 reserved2;
+#endif
+ u32 ttt;
+ u32 cmd_sn;
+ u32 reserved3[2];
+ u32 resp_bd_list_addr_lo;
+ u32 resp_bd_list_addr_hi;
+ u32 resp_buffer;
+#define ISCSI_NOP_OUT_REQUEST_RESP_BUFFER_LENGTH (0xFFFFFF<<0)
+#define ISCSI_NOP_OUT_REQUEST_RESP_BUFFER_LENGTH_SHIFT 0
+#define ISCSI_NOP_OUT_REQUEST_NUM_RESP_BDS (0xFF<<24)
+#define ISCSI_NOP_OUT_REQUEST_NUM_RESP_BDS_SHIFT 24
+#if defined(__BIG_ENDIAN)
+ u16 reserved7;
+ u8 reserved6;
+ u8 flags;
+#define ISCSI_NOP_OUT_REQUEST_RESERVED4 (0x1<<0)
+#define ISCSI_NOP_OUT_REQUEST_RESERVED4_SHIFT 0
+#define ISCSI_NOP_OUT_REQUEST_LOCAL_COMPLETION (0x1<<1)
+#define ISCSI_NOP_OUT_REQUEST_LOCAL_COMPLETION_SHIFT 1
+#define ISCSI_NOP_OUT_REQUEST_ZERO_FILL (0x3F<<2)
+#define ISCSI_NOP_OUT_REQUEST_ZERO_FILL_SHIFT 2
+#elif defined(__LITTLE_ENDIAN)
+ u8 flags;
+#define ISCSI_NOP_OUT_REQUEST_RESERVED4 (0x1<<0)
+#define ISCSI_NOP_OUT_REQUEST_RESERVED4_SHIFT 0
+#define ISCSI_NOP_OUT_REQUEST_LOCAL_COMPLETION (0x1<<1)
+#define ISCSI_NOP_OUT_REQUEST_LOCAL_COMPLETION_SHIFT 1
+#define ISCSI_NOP_OUT_REQUEST_ZERO_FILL (0x3F<<2)
+#define ISCSI_NOP_OUT_REQUEST_ZERO_FILL_SHIFT 2
+ u8 reserved6;
+ u16 reserved7;
+#endif
+ u32 bd_list_addr_lo;
+ u32 bd_list_addr_hi;
+#if defined(__BIG_ENDIAN)
+ u8 cq_index;
+ u8 reserved9;
+ u8 reserved8;
+ u8 num_bds;
+#elif defined(__LITTLE_ENDIAN)
+ u8 num_bds;
+ u8 reserved8;
+ u8 reserved9;
+ u8 cq_index;
+#endif
+};
+
+/*
+ * iSCSI Reject CQE
+ */
+struct bnx2i_reject_msg {
+#if defined(__BIG_ENDIAN)
+ u8 op_code;
+ u8 reserved1;
+ u8 reason;
+ u8 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+ u8 reserved0;
+ u8 reason;
+ u8 reserved1;
+ u8 op_code;
+#endif
+ u32 data_length;
+ u32 exp_cmd_sn;
+ u32 max_cmd_sn;
+ u32 reserved2[2];
+#if defined(__BIG_ENDIAN)
+ u16 reserved4;
+ u8 err_code;
+ u8 reserved3;
+#elif defined(__LITTLE_ENDIAN)
+ u8 reserved3;
+ u8 err_code;
+ u16 reserved4;
+#endif
+ u32 reserved5[8];
+ u32 cq_req_sn;
+};
+
+/*
+ * bnx2i iSCSI TMF SQ WQE
+ */
+struct bnx2i_tmf_request {
+#if defined(__BIG_ENDIAN)
+ u8 op_code;
+ u8 op_attr;
+#define ISCSI_TMF_REQUEST_FUNCTION (0x7F<<0)
+#define ISCSI_TMF_REQUEST_FUNCTION_SHIFT 0
+#define ISCSI_TMF_REQUEST_ALWAYS_ONE (0x1<<7)
+#define ISCSI_TMF_REQUEST_ALWAYS_ONE_SHIFT 7
+ u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+ u16 reserved0;
+ u8 op_attr;
+#define ISCSI_TMF_REQUEST_FUNCTION (0x7F<<0)
+#define ISCSI_TMF_REQUEST_FUNCTION_SHIFT 0
+#define ISCSI_TMF_REQUEST_ALWAYS_ONE (0x1<<7)
+#define ISCSI_TMF_REQUEST_ALWAYS_ONE_SHIFT 7
+ u8 op_code;
+#endif
+ u32 data_length;
+ u32 lun[2];
+#if defined(__BIG_ENDIAN)
+ u16 reserved1;
+ u16 itt;
+#define ISCSI_TMF_REQUEST_INDEX (0x3FFF<<0)
+#define ISCSI_TMF_REQUEST_INDEX_SHIFT 0
+#define ISCSI_TMF_REQUEST_TYPE (0x3<<14)
+#define ISCSI_TMF_REQUEST_TYPE_SHIFT 14
+#elif defined(__LITTLE_ENDIAN)
+ u16 itt;
+#define ISCSI_TMF_REQUEST_INDEX (0x3FFF<<0)
+#define ISCSI_TMF_REQUEST_INDEX_SHIFT 0
+#define ISCSI_TMF_REQUEST_TYPE (0x3<<14)
+#define ISCSI_TMF_REQUEST_TYPE_SHIFT 14
+ u16 reserved1;
+#endif
+ u32 ref_itt;
+ u32 cmd_sn;
+ u32 reserved2;
+ u32 ref_cmd_sn;
+ u32 reserved3[3];
+ u32 zero_fill;
+ u32 bd_list_addr_lo;
+ u32 bd_list_addr_hi;
+#if defined(__BIG_ENDIAN)
+ u8 cq_index;
+ u8 reserved5;
+ u8 reserved4;
+ u8 num_bds;
+#elif defined(__LITTLE_ENDIAN)
+ u8 num_bds;
+ u8 reserved4;
+ u8 reserved5;
+ u8 cq_index;
+#endif
+};
+
+/*
+ * iSCSI Text SQ WQE
+ */
+struct bnx2i_text_request {
+#if defined(__BIG_ENDIAN)
+ u8 op_code;
+ u8 op_attr;
+#define ISCSI_TEXT_REQUEST_RESERVED1 (0x3F<<0)
+#define ISCSI_TEXT_REQUEST_RESERVED1_SHIFT 0
+#define ISCSI_TEXT_REQUEST_CONT (0x1<<6)
+#define ISCSI_TEXT_REQUEST_CONT_SHIFT 6
+#define ISCSI_TEXT_REQUEST_FINAL (0x1<<7)
+#define ISCSI_TEXT_REQUEST_FINAL_SHIFT 7
+ u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+ u16 reserved0;
+ u8 op_attr;
+#define ISCSI_TEXT_REQUEST_RESERVED1 (0x3F<<0)
+#define ISCSI_TEXT_REQUEST_RESERVED1_SHIFT 0
+#define ISCSI_TEXT_REQUEST_CONT (0x1<<6)
+#define ISCSI_TEXT_REQUEST_CONT_SHIFT 6
+#define ISCSI_TEXT_REQUEST_FINAL (0x1<<7)
+#define ISCSI_TEXT_REQUEST_FINAL_SHIFT 7
+ u8 op_code;
+#endif
+ u32 data_length;
+ u32 lun[2];
+#if defined(__BIG_ENDIAN)
+ u16 reserved3;
+ u16 itt;
+#define ISCSI_TEXT_REQUEST_INDEX (0x3FFF<<0)
+#define ISCSI_TEXT_REQUEST_INDEX_SHIFT 0
+#define ISCSI_TEXT_REQUEST_TYPE (0x3<<14)
+#define ISCSI_TEXT_REQUEST_TYPE_SHIFT 14
+#elif defined(__LITTLE_ENDIAN)
+ u16 itt;
+#define ISCSI_TEXT_REQUEST_INDEX (0x3FFF<<0)
+#define ISCSI_TEXT_REQUEST_INDEX_SHIFT 0
+#define ISCSI_TEXT_REQUEST_TYPE (0x3<<14)
+#define ISCSI_TEXT_REQUEST_TYPE_SHIFT 14
+ u16 reserved3;
+#endif
+ u32 ttt;
+ u32 cmd_sn;
+ u32 reserved4[2];
+ u32 resp_bd_list_addr_lo;
+ u32 resp_bd_list_addr_hi;
+ u32 resp_buffer;
+#define ISCSI_TEXT_REQUEST_RESP_BUFFER_LENGTH (0xFFFFFF<<0)
+#define ISCSI_TEXT_REQUEST_RESP_BUFFER_LENGTH_SHIFT 0
+#define ISCSI_TEXT_REQUEST_NUM_RESP_BDS (0xFF<<24)
+#define ISCSI_TEXT_REQUEST_NUM_RESP_BDS_SHIFT 24
+ u32 zero_fill;
+ u32 bd_list_addr_lo;
+ u32 bd_list_addr_hi;
+#if defined(__BIG_ENDIAN)
+ u8 cq_index;
+ u8 reserved7;
+ u8 reserved6;
+ u8 num_bds;
+#elif defined(__LITTLE_ENDIAN)
+ u8 num_bds;
+ u8 reserved6;
+ u8 reserved7;
+ u8 cq_index;
+#endif
+};
+
+/*
+ * iSCSI SQ WQE
+ */
+union iscsi_request {
+ struct bnx2i_cmd_request cmd;
+ struct bnx2i_tmf_request tmf;
+ struct bnx2i_nop_out_request nop_out;
+ struct bnx2i_login_request login_req;
+ struct bnx2i_text_request text;
+ struct bnx2i_logout_request logout_req;
+ struct bnx2i_cleanup_request cleanup;
+};
+
+
+/*
+ * iSCSI TMF CQE
+ */
+struct bnx2i_tmf_response {
+#if defined(__BIG_ENDIAN)
+ u8 op_code;
+ u8 reserved1;
+ u8 response;
+ u8 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+ u8 reserved0;
+ u8 response;
+ u8 reserved1;
+ u8 op_code;
+#endif
+ u32 reserved2;
+ u32 exp_cmd_sn;
+ u32 max_cmd_sn;
+ u32 reserved3[2];
+#if defined(__BIG_ENDIAN)
+ u16 reserved5;
+ u8 err_code;
+ u8 reserved4;
+#elif defined(__LITTLE_ENDIAN)
+ u8 reserved4;
+ u8 err_code;
+ u16 reserved5;
+#endif
+ u32 reserved6[7];
+#if defined(__BIG_ENDIAN)
+ u16 reserved7;
+ u16 itt;
+#define ISCSI_TMF_RESPONSE_INDEX (0x3FFF<<0)
+#define ISCSI_TMF_RESPONSE_INDEX_SHIFT 0
+#define ISCSI_TMF_RESPONSE_TYPE (0x3<<14)
+#define ISCSI_TMF_RESPONSE_TYPE_SHIFT 14
+#elif defined(__LITTLE_ENDIAN)
+ u16 itt;
+#define ISCSI_TMF_RESPONSE_INDEX (0x3FFF<<0)
+#define ISCSI_TMF_RESPONSE_INDEX_SHIFT 0
+#define ISCSI_TMF_RESPONSE_TYPE (0x3<<14)
+#define ISCSI_TMF_RESPONSE_TYPE_SHIFT 14
+ u16 reserved7;
+#endif
+ u32 cq_req_sn;
+};
+
+/*
+ * iSCSI Text CQE
+ */
+struct bnx2i_text_response {
+#if defined(__BIG_ENDIAN)
+ u8 op_code;
+ u8 response_flags;
+#define ISCSI_TEXT_RESPONSE_RESERVED1 (0x3F<<0)
+#define ISCSI_TEXT_RESPONSE_RESERVED1_SHIFT 0
+#define ISCSI_TEXT_RESPONSE_CONT (0x1<<6)
+#define ISCSI_TEXT_RESPONSE_CONT_SHIFT 6
+#define ISCSI_TEXT_RESPONSE_FINAL (0x1<<7)
+#define ISCSI_TEXT_RESPONSE_FINAL_SHIFT 7
+ u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+ u16 reserved0;
+ u8 response_flags;
+#define ISCSI_TEXT_RESPONSE_RESERVED1 (0x3F<<0)
+#define ISCSI_TEXT_RESPONSE_RESERVED1_SHIFT 0
+#define ISCSI_TEXT_RESPONSE_CONT (0x1<<6)
+#define ISCSI_TEXT_RESPONSE_CONT_SHIFT 6
+#define ISCSI_TEXT_RESPONSE_FINAL (0x1<<7)
+#define ISCSI_TEXT_RESPONSE_FINAL_SHIFT 7
+ u8 op_code;
+#endif
+ u32 data_length;
+ u32 exp_cmd_sn;
+ u32 max_cmd_sn;
+ u32 ttt;
+ u32 reserved2;
+#if defined(__BIG_ENDIAN)
+ u16 reserved4;
+ u8 err_code;
+ u8 reserved3;
+#elif defined(__LITTLE_ENDIAN)
+ u8 reserved3;
+ u8 err_code;
+ u16 reserved4;
+#endif
+ u32 reserved5;
+ u32 lun[2];
+ u32 reserved6[4];
+#if defined(__BIG_ENDIAN)
+ u16 reserved7;
+ u16 itt;
+#define ISCSI_TEXT_RESPONSE_INDEX (0x3FFF<<0)
+#define ISCSI_TEXT_RESPONSE_INDEX_SHIFT 0
+#define ISCSI_TEXT_RESPONSE_TYPE (0x3<<14)
+#define ISCSI_TEXT_RESPONSE_TYPE_SHIFT 14
+#elif defined(__LITTLE_ENDIAN)
+ u16 itt;
+#define ISCSI_TEXT_RESPONSE_INDEX (0x3FFF<<0)
+#define ISCSI_TEXT_RESPONSE_INDEX_SHIFT 0
+#define ISCSI_TEXT_RESPONSE_TYPE (0x3<<14)
+#define ISCSI_TEXT_RESPONSE_TYPE_SHIFT 14
+ u16 reserved7;
+#endif
+ u32 cq_req_sn;
+};
+
+/*
+ * iSCSI CQE
+ */
+union iscsi_response {
+ struct bnx2i_cmd_response cmd;
+ struct bnx2i_tmf_response tmf;
+ struct bnx2i_login_response login_resp;
+ struct bnx2i_text_response text;
+ struct bnx2i_logout_response logout_resp;
+ struct bnx2i_cleanup_response cleanup;
+ struct bnx2i_reject_msg reject;
+ struct bnx2i_async_msg async;
+ struct bnx2i_nop_in_msg nop_in;
+};
+
+#endif /* __57XX_ISCSI_HSI_LINUX_LE__ */
diff --git a/drivers/scsi/bnx2i/Kconfig b/drivers/scsi/bnx2i/Kconfig
new file mode 100644
index 0000000..820d428
--- /dev/null
+++ b/drivers/scsi/bnx2i/Kconfig
@@ -0,0 +1,7 @@
+config SCSI_BNX2_ISCSI
+ tristate "Broadcom NetXtreme II iSCSI support"
+ select SCSI_ISCSI_ATTRS
+ select CNIC
+ ---help---
+ This driver supports iSCSI offload for the Broadcom NetXtreme II
+ devices.
diff --git a/drivers/scsi/bnx2i/Makefile b/drivers/scsi/bnx2i/Makefile
new file mode 100644
index 0000000..b5802bd
--- /dev/null
+++ b/drivers/scsi/bnx2i/Makefile
@@ -0,0 +1,3 @@
+bnx2i-y := bnx2i_init.o bnx2i_hwi.o bnx2i_iscsi.o bnx2i_sysfs.o
+
+obj-$(CONFIG_SCSI_BNX2_ISCSI) += bnx2i.o
diff --git a/drivers/scsi/bnx2i/bnx2i.h b/drivers/scsi/bnx2i/bnx2i.h
new file mode 100644
index 0000000..d7576f2
--- /dev/null
+++ b/drivers/scsi/bnx2i/bnx2i.h
@@ -0,0 +1,771 @@
+/* bnx2i.h: Broadcom NetXtreme II iSCSI driver.
+ *
+ * Copyright (c) 2006 - 2009 Broadcom Corporation
+ * Copyright (c) 2007, 2008 Red Hat, Inc. All rights reserved.
+ * Copyright (c) 2007, 2008 Mike Christie
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ *
+ * Written by: Anil Veerabhadrappa (anilgv@broadcom.com)
+ */
+
+#ifndef _BNX2I_H_
+#define _BNX2I_H_
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+
+#include <linux/errno.h>
+#include <linux/pci.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/in.h>
+#include <linux/kfifo.h>
+#include <linux/netdevice.h>
+#include <linux/completion.h>
+
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_eh.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi.h>
+#include <scsi/iscsi_proto.h>
+#include <scsi/libiscsi.h>
+#include <scsi/scsi_transport_iscsi.h>
+
+#include "../../net/cnic_if.h"
+#include "57xx_iscsi_hsi.h"
+#include "57xx_iscsi_constants.h"
+
+#define BNX2_ISCSI_DRIVER_NAME "bnx2i"
+
+#define BNX2I_MAX_ADAPTERS 8
+
+#define ISCSI_MAX_CONNS_PER_HBA 128
+#define ISCSI_MAX_SESS_PER_HBA ISCSI_MAX_CONNS_PER_HBA
+#define ISCSI_MAX_CMDS_PER_SESS 128
+
+/* Total active commands across all connections supported by devices */
+#define ISCSI_MAX_CMDS_PER_HBA_5708 (28 * (ISCSI_MAX_CMDS_PER_SESS - 1))
+#define ISCSI_MAX_CMDS_PER_HBA_5709 (128 * (ISCSI_MAX_CMDS_PER_SESS - 1))
+#define ISCSI_MAX_CMDS_PER_HBA_57710 (256 * (ISCSI_MAX_CMDS_PER_SESS - 1))
+
+#define ISCSI_MAX_BDS_PER_CMD 32
+
+#define MAX_PAGES_PER_CTRL_STRUCT_POOL 8
+#define BNX2I_RESERVED_SLOW_PATH_CMD_SLOTS 4
+
+/* 5706/08 hardware has limit on maximum buffer size per BD it can handle */
+#define MAX_BD_LENGTH 65535
+#define BD_SPLIT_SIZE 32768
+
+/* min, max & default values for SQ/RQ/CQ size, configurable via' modparam */
+#define BNX2I_SQ_WQES_MIN 16
+#define BNX2I_570X_SQ_WQES_MAX 128
+#define BNX2I_5770X_SQ_WQES_MAX 512
+#define BNX2I_570X_SQ_WQES_DEFAULT 128
+#define BNX2I_5770X_SQ_WQES_DEFAULT 256
+
+#define BNX2I_570X_CQ_WQES_MAX 128
+#define BNX2I_5770X_CQ_WQES_MAX 512
+
+#define BNX2I_RQ_WQES_MIN 16
+#define BNX2I_RQ_WQES_MAX 32
+#define BNX2I_RQ_WQES_DEFAULT 16
+
+/* CCELLs per conn */
+#define BNX2I_CCELLS_MIN 16
+#define BNX2I_CCELLS_MAX 96
+#define BNX2I_CCELLS_DEFAULT 64
+
+#define ITT_INVALID_SIGNATURE 0xFFFF
+
+#define ISCSI_CMD_CLEANUP_TIMEOUT 100
+
+#define BNX2I_CONN_CTX_BUF_SIZE 16384
+
+#define BNX2I_SQ_WQE_SIZE 64
+#define BNX2I_RQ_WQE_SIZE 256
+#define BNX2I_CQE_SIZE 64
+
+#define MB_KERNEL_CTX_SHIFT 8
+#define MB_KERNEL_CTX_SIZE (1 << MB_KERNEL_CTX_SHIFT)
+
+#define CTX_SHIFT 7
+#define GET_CID_NUM(cid_addr) ((cid_addr) >> CTX_SHIFT)
+
+#define CTX_OFFSET 0x10000
+#define MAX_CID_CNT 0x4000
+
+/* 5709 context registers */
+#define BNX2_MQ_CONFIG2 0x00003d00
+#define BNX2_MQ_CONFIG2_CONT_SZ (0x7L<<4)
+#define BNX2_MQ_CONFIG2_FIRST_L4L5 (0x1fL<<8)
+
+/* 57710's BAR2 is mapped to doorbell registers */
+#define BNX2X_DOORBELL_PCI_BAR 2
+#define BNX2X_MAX_CQS 8
+
+#define CNIC_ARM_CQE 1
+#define CNIC_DISARM_CQE 0
+
+#define REG_RD(__hba, offset) \
+ readl(__hba->regview + offset)
+#define REG_WR(__hba, offset, val) \
+ writel(val, __hba->regview + offset)
+
+
+/**
+ * struct generic_pdu_resc - login pdu resource structure
+ *
+ * @req_buf: driver buffer used to stage payload associated with
+ * the login request
+ * @req_dma_addr: dma address for iscsi login request payload buffer
+ * @req_buf_size: actual login request payload length
+ * @req_wr_ptr: pointer into login request buffer when next data is
+ * to be written
+ * @resp_hdr: iscsi header where iscsi login response header is to
+ * be recreated
+ * @resp_buf: buffer to stage login response payload
+ * @resp_dma_addr: login response payload buffer dma address
+ * @resp_buf_size: login response paylod length
+ * @resp_wr_ptr: pointer into login response buffer when next data is
+ * to be written
+ * @req_bd_tbl: iscsi login request payload BD table
+ * @req_bd_dma: login request BD table dma address
+ * @resp_bd_tbl: iscsi login response payload BD table
+ * @resp_bd_dma: login request BD table dma address
+ *
+ * following structure defines buffer info for generic pdus such as iSCSI Login,
+ * Logout and NOP
+ */
+struct generic_pdu_resc {
+ char *req_buf;
+ dma_addr_t req_dma_addr;
+ u32 req_buf_size;
+ char *req_wr_ptr;
+ struct iscsi_hdr resp_hdr;
+ char *resp_buf;
+ dma_addr_t resp_dma_addr;
+ u32 resp_buf_size;
+ char *resp_wr_ptr;
+ char *req_bd_tbl;
+ dma_addr_t req_bd_dma;
+ char *resp_bd_tbl;
+ dma_addr_t resp_bd_dma;
+};
+
+
+/**
+ * struct bd_resc_page - tracks DMA'able memory allocated for BD tables
+ *
+ * @link: list head to link elements
+ * @max_ptrs: maximun pointers that can be stored in this page
+ * @num_valid: number of pointer valid in this page
+ * @page: base addess for page pointer array
+ *
+ * structure to track DMA'able memory allocated for command BD tables
+ */
+struct bd_resc_page {
+ struct list_head link;
+ u32 max_ptrs;
+ u32 num_valid;
+ void *page[1];
+};
+
+
+/**
+ * struct io_bdt - I/O buffer destricptor table
+ *
+ * @bd_tbl: BD table's virtual address
+ * @bd_tbl_dma: BD table's dma address
+ * @bd_valid: num valid BD entries
+ *
+ * IO BD table
+ */
+struct io_bdt {
+ struct iscsi_bd *bd_tbl;
+ dma_addr_t bd_tbl_dma;
+ u16 bd_valid;
+};
+
+
+/**
+ * bnx2i_cmd - iscsi command structure
+ *
+ * @scsi_cmd: SCSI-ML task pointer corresponding to this iscsi cmd
+ * @sg: SG list
+ * @io_tbl: buffer descriptor (BD) table
+ * @bd_tbl_dma: buffer descriptor (BD) table's dma address
+ */
+struct bnx2i_cmd {
+ struct iscsi_hdr hdr;
+ struct bnx2i_conn *conn;
+ struct scsi_cmnd *scsi_cmd;
+ struct scatterlist *sg;
+ struct io_bdt io_tbl;
+ dma_addr_t bd_tbl_dma;
+ struct bnx2i_cmd_request req;
+};
+
+
+/**
+ * struct bnx2i_conn - iscsi connection structure
+ *
+ * @cls_conn: pointer to iscsi cls conn
+ * @hba: adapter structure pointer
+ * @iscsi_conn_cid: iscsi conn id
+ * @fw_cid: firmware iscsi context id
+ * @ep: endpoint structure pointer
+ * @gen_pdu: login/nopout/logout pdu resources
+ * @violation_notified: bit mask used to track iscsi error/warning messages
+ * already printed out
+ *
+ * iSCSI connection structure
+ */
+struct bnx2i_conn {
+ struct iscsi_cls_conn *cls_conn;
+ struct bnx2i_hba *hba;
+ struct completion cmd_cleanup_cmpl;
+ int is_bound;
+
+ u32 iscsi_conn_cid;
+#define BNX2I_CID_RESERVED 0x5AFF
+ u32 fw_cid;
+
+ struct timer_list poll_timer;
+ /*
+ * Queue Pair (QP) related structure elements.
+ */
+ struct bnx2i_endpoint *ep;
+
+ /*
+ * Buffer for login negotiation process
+ */
+ struct generic_pdu_resc gen_pdu;
+ u64 violation_notified;
+};
+
+
+
+/**
+ * struct iscsi_cid_queue - Per adapter iscsi cid queue
+ *
+ * @cid_que_base: queue base memory
+ * @cid_que: queue memory pointer
+ * @cid_q_prod_idx: produce index
+ * @cid_q_cons_idx: consumer index
+ * @cid_q_max_idx: max index. used to detect wrap around condition
+ * @cid_free_cnt: queue size
+ * @conn_cid_tbl: iscsi cid to conn structure mapping table
+ *
+ * Per adapter iSCSI CID Queue
+ */
+struct iscsi_cid_queue {
+ void *cid_que_base;
+ u32 *cid_que;
+ u32 cid_q_prod_idx;
+ u32 cid_q_cons_idx;
+ u32 cid_q_max_idx;
+ u32 cid_free_cnt;
+ struct bnx2i_conn **conn_cid_tbl;
+};
+
+/**
+ * struct bnx2i_hba - bnx2i adapter structure
+ *
+ * @link: list head to link elements
+ * @cnic: pointer to cnic device
+ * @pcidev: pointer to pci dev
+ * @netdev: pointer to netdev structure
+ * @regview: mapped PCI register space
+ * @age: age, incremented by every recovery
+ * @cnic_dev_type: cnic device type, 5706/5708/5709/57710
+ * @mail_queue_access: mailbox queue access mode, applicable to 5709 only
+ * @reg_with_cnic: indicates whether the device is register with CNIC
+ * @adapter_state: adapter state, UP, GOING_DOWN, LINK_DOWN
+ * @mtu_supported: Ethernet MTU supported
+ * @shost: scsi host pointer
+ * @max_sqes: SQ size
+ * @max_rqes: RQ size
+ * @max_cqes: CQ size
+ * @num_ccell: number of command cells per connection
+ * @ofld_conns_active: active connection list
+ * @max_active_conns: max offload connections supported by this device
+ * @cid_que: iscsi cid queue
+ * @ep_rdwr_lock: read / write lock to synchronize various ep lists
+ * @ep_ofld_list: connection list for pending offload completion
+ * @ep_destroy_list: connection list for pending offload completion
+ * @mp_bd_tbl: BD table to be used with middle path requests
+ * @mp_bd_dma: DMA address of 'mp_bd_tbl' memory buffer
+ * @dummy_buffer: Dummy buffer to be used with zero length scsicmd reqs
+ * @dummy_buf_dma: DMA address of 'dummy_buffer' memory buffer
+ * @lock: lock to synchonize access to hba structure
+ * @pci_did: PCI device ID
+ * @pci_vid: PCI vendor ID
+ * @pci_sdid: PCI subsystem device ID
+ * @pci_svid: PCI subsystem vendor ID
+ * @pci_func: PCI function number in system pci tree
+ * @pci_devno: PCI device number in system pci tree
+ * @num_wqe_sent: statistic counter, total wqe's sent
+ * @num_cqe_rcvd: statistic counter, total cqe's received
+ * @num_intr_claimed: statistic counter, total interrupts claimed
+ * @link_changed_count: statistic counter, num of link change notifications
+ * received
+ * @ipaddr_changed_count: statistic counter, num times IP address changed while
+ * at least one connection is offloaded
+ * @num_sess_opened: statistic counter, total num sessions opened
+ * @num_conn_opened: statistic counter, total num conns opened on this hba
+ * @ctx_ccell_tasks: captures number of ccells and tasks supported by
+ * currently offloaded connection, used to decode
+ * context memory
+ *
+ * Adapter Data Structure
+ */
+struct bnx2i_hba {
+ struct list_head link;
+ struct cnic_dev *cnic;
+ struct pci_dev *pcidev;
+ struct net_device *netdev;
+ void __iomem *regview;
+
+ u32 age;
+ unsigned long cnic_dev_type;
+ #define BNX2I_NX2_DEV_5706 0x0
+ #define BNX2I_NX2_DEV_5708 0x1
+ #define BNX2I_NX2_DEV_5709 0x2
+ #define BNX2I_NX2_DEV_57710 0x3
+ u32 mail_queue_access;
+ #define BNX2I_MQ_KERNEL_MODE 0x0
+ #define BNX2I_MQ_KERNEL_BYPASS_MODE 0x1
+ #define BNX2I_MQ_BIN_MODE 0x2
+ unsigned long reg_with_cnic;
+ #define BNX2I_CNIC_REGISTERED 1
+
+ unsigned long adapter_state;
+ #define ADAPTER_STATE_UP 0
+ #define ADAPTER_STATE_GOING_DOWN 1
+ #define ADAPTER_STATE_LINK_DOWN 2
+ #define ADAPTER_STATE_INIT_FAILED 31
+ unsigned int mtu_supported;
+ #define BNX2I_MAX_MTU_SUPPORTED 1500
+
+ struct Scsi_Host *shost;
+
+ u32 max_sqes;
+ u32 max_rqes;
+ u32 max_cqes;
+ u32 num_ccell;
+
+ int ofld_conns_active;
+
+ int max_active_conns;
+ struct iscsi_cid_queue cid_que;
+
+ rwlock_t ep_rdwr_lock;
+ struct list_head ep_ofld_list;
+ struct list_head ep_destroy_list;
+
+ /*
+ * BD table to be used with MP (Middle Path requests.
+ */
+ char *mp_bd_tbl;
+ dma_addr_t mp_bd_dma;
+ char *dummy_buffer;
+ dma_addr_t dummy_buf_dma;
+
+ spinlock_t lock; /* protects hba structure access */
+ struct mutex net_dev_lock;/* sync net device access */
+
+ /*
+ * PCI related info.
+ */
+ u16 pci_did;
+ u16 pci_vid;
+ u16 pci_sdid;
+ u16 pci_svid;
+ u16 pci_func;
+ u16 pci_devno;
+
+ /*
+ * Following are a bunch of statistics useful during development
+ * and later stage for score boarding.
+ */
+ u32 num_wqe_sent;
+ u32 num_cqe_rcvd;
+ u32 num_intr_claimed;
+ u32 link_changed_count;
+ u32 ipaddr_changed_count;
+ u32 num_sess_opened;
+ u32 num_conn_opened;
+ unsigned int ctx_ccell_tasks;
+};
+
+
+/*******************************************************************************
+ * QP [ SQ / RQ / CQ ] info.
+ ******************************************************************************/
+
+/*
+ * SQ/RQ/CQ generic structure definition
+ */
+struct sqe {
+ u8 sqe_byte[BNX2I_SQ_WQE_SIZE];
+};
+
+struct rqe {
+ u8 rqe_byte[BNX2I_RQ_WQE_SIZE];
+};
+
+struct cqe {
+ u8 cqe_byte[BNX2I_CQE_SIZE];
+};
+
+
+enum {
+#if defined(__LITTLE_ENDIAN)
+ CNIC_EVENT_COAL_INDEX = 0x0,
+ CNIC_SEND_DOORBELL = 0x4,
+ CNIC_EVENT_CQ_ARM = 0x7,
+ CNIC_RECV_DOORBELL = 0x8
+#elif defined(__BIG_ENDIAN)
+ CNIC_EVENT_COAL_INDEX = 0x2,
+ CNIC_SEND_DOORBELL = 0x6,
+ CNIC_EVENT_CQ_ARM = 0x4,
+ CNIC_RECV_DOORBELL = 0xa
+#endif
+};
+
+
+/*
+ * CQ DB
+ */
+struct bnx2x_iscsi_cq_pend_cmpl {
+ /* CQ producer, updated by Ustorm */
+ u16 ustrom_prod;
+ /* CQ pending completion counter */
+ u16 pend_cntr;
+};
+
+
+struct bnx2i_5771x_cq_db {
+ struct bnx2x_iscsi_cq_pend_cmpl qp_pend_cmpl[BNX2X_MAX_CQS];
+ /* CQ pending completion ITT array */
+ u16 itt[BNX2X_MAX_CQS];
+ /* Cstorm CQ sequence to notify array, updated by driver */;
+ u16 sqn[BNX2X_MAX_CQS];
+ u32 reserved[4] /* 16 byte allignment */;
+};
+
+
+struct bnx2i_5771x_sq_rq_db {
+ u16 prod_idx;
+ u8 reserved0[14]; /* Pad structure size to 16 bytes */
+};
+
+
+struct bnx2i_5771x_dbell_hdr {
+ u8 header;
+ /* 1 for rx doorbell, 0 for tx doorbell */
+#define B577XX_DOORBELL_HDR_RX (0x1<<0)
+#define B577XX_DOORBELL_HDR_RX_SHIFT 0
+ /* 0 for normal doorbell, 1 for advertise wnd doorbell */
+#define B577XX_DOORBELL_HDR_DB_TYPE (0x1<<1)
+#define B577XX_DOORBELL_HDR_DB_TYPE_SHIFT 1
+ /* rdma tx only: DPM transaction size specifier (64/128/256/512B) */
+#define B577XX_DOORBELL_HDR_DPM_SIZE (0x3<<2)
+#define B577XX_DOORBELL_HDR_DPM_SIZE_SHIFT 2
+ /* connection type */
+#define B577XX_DOORBELL_HDR_CONN_TYPE (0xF<<4)
+#define B577XX_DOORBELL_HDR_CONN_TYPE_SHIFT 4
+};
+
+struct bnx2i_5771x_dbell {
+ struct bnx2i_5771x_dbell_hdr dbell;
+ u8 pad[3];
+
+};
+
+/**
+ * struct qp_info - QP (share queue region) atrributes structure
+ *
+ * @ctx_base: ioremapped pci register base to access doorbell register
+ * pertaining to this offloaded connection
+ * @sq_virt: virtual address of send queue (SQ) region
+ * @sq_phys: DMA address of SQ memory region
+ * @sq_mem_size: SQ size
+ * @sq_prod_qe: SQ producer entry pointer
+ * @sq_cons_qe: SQ consumer entry pointer
+ * @sq_first_qe: virtaul address of first entry in SQ
+ * @sq_last_qe: virtaul address of last entry in SQ
+ * @sq_prod_idx: SQ producer index
+ * @sq_cons_idx: SQ consumer index
+ * @sqe_left: number sq entry left
+ * @sq_pgtbl_virt: page table describing buffer consituting SQ region
+ * @sq_pgtbl_phys: dma address of 'sq_pgtbl_virt'
+ * @sq_pgtbl_size: SQ page table size
+ * @cq_virt: virtual address of completion queue (CQ) region
+ * @cq_phys: DMA address of RQ memory region
+ * @cq_mem_size: CQ size
+ * @cq_prod_qe: CQ producer entry pointer
+ * @cq_cons_qe: CQ consumer entry pointer
+ * @cq_first_qe: virtaul address of first entry in CQ
+ * @cq_last_qe: virtaul address of last entry in CQ
+ * @cq_prod_idx: CQ producer index
+ * @cq_cons_idx: CQ consumer index
+ * @cqe_left: number cq entry left
+ * @cqe_size: size of each CQ entry
+ * @cqe_exp_seq_sn: next expected CQE sequence number
+ * @cq_pgtbl_virt: page table describing buffer consituting CQ region
+ * @cq_pgtbl_phys: dma address of 'cq_pgtbl_virt'
+ * @cq_pgtbl_size: CQ page table size
+ * @rq_virt: virtual address of receive queue (RQ) region
+ * @rq_phys: DMA address of RQ memory region
+ * @rq_mem_size: RQ size
+ * @rq_prod_qe: RQ producer entry pointer
+ * @rq_cons_qe: RQ consumer entry pointer
+ * @rq_first_qe: virtaul address of first entry in RQ
+ * @rq_last_qe: virtaul address of last entry in RQ
+ * @rq_prod_idx: RQ producer index
+ * @rq_cons_idx: RQ consumer index
+ * @rqe_left: number rq entry left
+ * @rq_pgtbl_virt: page table describing buffer consituting RQ region
+ * @rq_pgtbl_phys: dma address of 'rq_pgtbl_virt'
+ * @rq_pgtbl_size: RQ page table size
+ *
+ * queue pair (QP) is a per connection shared data structure which is used
+ * to send work requests (SQ), receive completion notifications (CQ)
+ * and receive asynchoronous / scsi sense info (RQ). 'qp_info' structure
+ * below holds queue memory, consumer/producer indexes and page table
+ * information
+ */
+struct qp_info {
+ void __iomem *ctx_base;
+#define DPM_TRIGER_TYPE 0x40
+
+#define BNX2I_570x_QUE_DB_SIZE 0
+#define BNX2I_5771x_QUE_DB_SIZE 16
+ struct sqe *sq_virt;
+ dma_addr_t sq_phys;
+ u32 sq_mem_size;
+
+ struct sqe *sq_prod_qe;
+ struct sqe *sq_cons_qe;
+ struct sqe *sq_first_qe;
+ struct sqe *sq_last_qe;
+ u16 sq_prod_idx;
+ u16 sq_cons_idx;
+ u32 sqe_left;
+
+ void *sq_pgtbl_virt;
+ dma_addr_t sq_pgtbl_phys;
+ u32 sq_pgtbl_size; /* set to PAGE_SIZE for 5708 & 5709 */
+
+ struct cqe *cq_virt;
+ dma_addr_t cq_phys;
+ u32 cq_mem_size;
+
+ struct cqe *cq_prod_qe;
+ struct cqe *cq_cons_qe;
+ struct cqe *cq_first_qe;
+ struct cqe *cq_last_qe;
+ u16 cq_prod_idx;
+ u16 cq_cons_idx;
+ u32 cqe_left;
+ u32 cqe_size;
+ u32 cqe_exp_seq_sn;
+
+ void *cq_pgtbl_virt;
+ dma_addr_t cq_pgtbl_phys;
+ u32 cq_pgtbl_size; /* set to PAGE_SIZE for 5708 & 5709 */
+
+ struct rqe *rq_virt;
+ dma_addr_t rq_phys;
+ u32 rq_mem_size;
+
+ struct rqe *rq_prod_qe;
+ struct rqe *rq_cons_qe;
+ struct rqe *rq_first_qe;
+ struct rqe *rq_last_qe;
+ u16 rq_prod_idx;
+ u16 rq_cons_idx;
+ u32 rqe_left;
+
+ void *rq_pgtbl_virt;
+ dma_addr_t rq_pgtbl_phys;
+ u32 rq_pgtbl_size; /* set to PAGE_SIZE for 5708 & 5709 */
+};
+
+
+
+/*
+ * CID handles
+ */
+struct ep_handles {
+ u32 fw_cid;
+ u32 drv_iscsi_cid;
+ u16 pg_cid;
+ u16 rsvd;
+};
+
+
+enum {
+ EP_STATE_IDLE = 0x0,
+ EP_STATE_PG_OFLD_START = 0x1,
+ EP_STATE_PG_OFLD_COMPL = 0x2,
+ EP_STATE_OFLD_START = 0x4,
+ EP_STATE_OFLD_COMPL = 0x8,
+ EP_STATE_CONNECT_START = 0x10,
+ EP_STATE_CONNECT_COMPL = 0x20,
+ EP_STATE_ULP_UPDATE_START = 0x40,
+ EP_STATE_ULP_UPDATE_COMPL = 0x80,
+ EP_STATE_DISCONN_START = 0x100,
+ EP_STATE_DISCONN_COMPL = 0x200,
+ EP_STATE_CLEANUP_START = 0x400,
+ EP_STATE_CLEANUP_CMPL = 0x800,
+ EP_STATE_TCP_FIN_RCVD = 0x1000,
+ EP_STATE_TCP_RST_RCVD = 0x2000,
+ EP_STATE_PG_OFLD_FAILED = 0x1000000,
+ EP_STATE_ULP_UPDATE_FAILED = 0x2000000,
+ EP_STATE_CLEANUP_FAILED = 0x4000000,
+ EP_STATE_OFLD_FAILED = 0x8000000,
+ EP_STATE_CONNECT_FAILED = 0x10000000,
+ EP_STATE_DISCONN_TIMEDOUT = 0x20000000,
+};
+
+/**
+ * struct bnx2i_endpoint - representation of tcp connection in NX2 world
+ *
+ * @link: list head to link elements
+ * @hba: adapter to which this connection belongs
+ * @conn: iscsi connection this EP is linked to
+ * @sess: iscsi session this EP is linked to
+ * @cm_sk: cnic sock struct
+ * @hba_age: age to detect if 'iscsid' issues ep_disconnect()
+ * after HBA reset is completed by bnx2i/cnic/bnx2
+ * modules
+ * @state: tracks offload connection state machine
+ * @teardown_mode: indicates if conn teardown is abortive or orderly
+ * @qp: QP information
+ * @ids: contains chip allocated *context id* & driver assigned
+ * *iscsi cid*
+ * @ofld_timer: offload timer to detect timeout
+ * @ofld_wait: wait queue
+ *
+ * Endpoint Structure - equivalent of tcp socket structure
+ */
+struct bnx2i_endpoint {
+ struct list_head link;
+ struct bnx2i_hba *hba;
+ struct bnx2i_conn *conn;
+ struct cnic_sock *cm_sk;
+ u32 hba_age;
+ u32 state;
+ unsigned long timestamp;
+ int num_active_cmds;
+
+ struct qp_info qp;
+ struct ep_handles ids;
+ #define ep_iscsi_cid ids.drv_iscsi_cid
+ #define ep_cid ids.fw_cid
+ #define ep_pg_cid ids.pg_cid
+ struct timer_list ofld_timer;
+ wait_queue_head_t ofld_wait;
+};
+
+
+
+/* Global variables */
+extern unsigned int error_mask1, error_mask2;
+extern u64 iscsi_error_mask;
+extern unsigned int en_tcp_dack;
+extern unsigned int event_coal_div;
+
+extern struct scsi_transport_template *bnx2i_scsi_xport_template;
+extern struct iscsi_transport bnx2i_iscsi_transport;
+extern struct cnic_ulp_ops bnx2i_cnic_cb;
+
+extern unsigned int sq_size;
+extern unsigned int rq_size;
+
+extern struct device_attribute *bnx2i_dev_attributes[];
+
+
+
+/*
+ * Function Prototypes
+ */
+extern void bnx2i_identify_device(struct bnx2i_hba *hba);
+extern void bnx2i_register_device(struct bnx2i_hba *hba);
+
+extern void bnx2i_ulp_init(struct cnic_dev *dev);
+extern void bnx2i_ulp_exit(struct cnic_dev *dev);
+extern void bnx2i_start(void *handle);
+extern void bnx2i_stop(void *handle);
+extern void bnx2i_reg_dev_all(void);
+extern void bnx2i_unreg_dev_all(void);
+extern struct bnx2i_hba *get_adapter_list_head(void);
+
+struct bnx2i_conn *bnx2i_get_conn_from_id(struct bnx2i_hba *hba,
+ u16 iscsi_cid);
+
+int bnx2i_alloc_ep_pool(void);
+void bnx2i_release_ep_pool(void);
+struct bnx2i_endpoint *bnx2i_ep_ofld_list_next(struct bnx2i_hba *hba);
+struct bnx2i_endpoint *bnx2i_ep_destroy_list_next(struct bnx2i_hba *hba);
+
+struct bnx2i_hba *bnx2i_find_hba_for_cnic(struct cnic_dev *cnic);
+
+struct bnx2i_hba *bnx2i_alloc_hba(struct cnic_dev *cnic);
+void bnx2i_free_hba(struct bnx2i_hba *hba);
+
+void bnx2i_get_rq_buf(struct bnx2i_conn *conn, char *ptr, int len);
+void bnx2i_put_rq_buf(struct bnx2i_conn *conn, int count);
+
+void bnx2i_iscsi_unmap_sg_list(struct bnx2i_cmd *cmd);
+
+void bnx2i_drop_session(struct iscsi_cls_session *session);
+
+extern int bnx2i_send_fw_iscsi_init_msg(struct bnx2i_hba *hba);
+extern int bnx2i_send_iscsi_login(struct bnx2i_conn *conn,
+ struct iscsi_task *mtask);
+extern int bnx2i_send_iscsi_tmf(struct bnx2i_conn *conn,
+ struct iscsi_task *mtask);
+extern int bnx2i_send_iscsi_scsicmd(struct bnx2i_conn *conn,
+ struct bnx2i_cmd *cmnd);
+extern int bnx2i_send_iscsi_nopout(struct bnx2i_conn *conn,
+ struct iscsi_task *mtask, u32 ttt,
+ char *datap, int data_len, int unsol);
+extern int bnx2i_send_iscsi_logout(struct bnx2i_conn *conn,
+ struct iscsi_task *mtask);
+extern void bnx2i_send_cmd_cleanup_req(struct bnx2i_hba *hba,
+ struct bnx2i_cmd *cmd);
+extern void bnx2i_send_conn_ofld_req(struct bnx2i_hba *hba,
+ struct bnx2i_endpoint *ep);
+extern void bnx2i_update_iscsi_conn(struct iscsi_conn *conn);
+extern void bnx2i_send_conn_destroy(struct bnx2i_hba *hba,
+ struct bnx2i_endpoint *ep);
+
+extern int bnx2i_alloc_qp_resc(struct bnx2i_hba *hba,
+ struct bnx2i_endpoint *ep);
+extern void bnx2i_free_qp_resc(struct bnx2i_hba *hba,
+ struct bnx2i_endpoint *ep);
+extern void bnx2i_ep_ofld_timer(unsigned long data);
+extern struct bnx2i_endpoint *bnx2i_find_ep_in_ofld_list(
+ struct bnx2i_hba *hba, u32 iscsi_cid);
+extern struct bnx2i_endpoint *bnx2i_find_ep_in_destroy_list(
+ struct bnx2i_hba *hba, u32 iscsi_cid);
+
+extern int bnx2i_map_ep_dbell_regs(struct bnx2i_endpoint *ep);
+extern void bnx2i_arm_cq_event_coalescing(struct bnx2i_endpoint *ep, u8 action);
+
+/* Debug related function prototypes */
+extern void bnx2i_print_pend_cmd_queue(struct bnx2i_conn *conn);
+extern void bnx2i_print_active_cmd_queue(struct bnx2i_conn *conn);
+extern void bnx2i_print_xmit_pdu_queue(struct bnx2i_conn *conn);
+extern void bnx2i_print_recv_state(struct bnx2i_conn *conn);
+
+#endif
diff --git a/drivers/scsi/bnx2i/bnx2i_hwi.c b/drivers/scsi/bnx2i/bnx2i_hwi.c
new file mode 100644
index 0000000..906cef5
--- /dev/null
+++ b/drivers/scsi/bnx2i/bnx2i_hwi.c
@@ -0,0 +1,2405 @@
+/* bnx2i_hwi.c: Broadcom NetXtreme II iSCSI driver.
+ *
+ * Copyright (c) 2006 - 2009 Broadcom Corporation
+ * Copyright (c) 2007, 2008 Red Hat, Inc. All rights reserved.
+ * Copyright (c) 2007, 2008 Mike Christie
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ *
+ * Written by: Anil Veerabhadrappa (anilgv@broadcom.com)
+ */
+
+#include <scsi/scsi_tcq.h>
+#include <scsi/libiscsi.h>
+#include "bnx2i.h"
+
+/**
+ * bnx2i_get_cid_num - get cid from ep
+ * @ep: endpoint pointer
+ *
+ * Only applicable to 57710 family of devices
+ */
+static u32 bnx2i_get_cid_num(struct bnx2i_endpoint *ep)
+{
+ u32 cid;
+
+ if (test_bit(BNX2I_NX2_DEV_57710, &ep->hba->cnic_dev_type))
+ cid = ep->ep_cid;
+ else
+ cid = GET_CID_NUM(ep->ep_cid);
+ return cid;
+}
+
+
+/**
+ * bnx2i_adjust_qp_size - Adjust SQ/RQ/CQ size for 57710 device type
+ * @hba: Adapter for which adjustments is to be made
+ *
+ * Only applicable to 57710 family of devices
+ */
+static void bnx2i_adjust_qp_size(struct bnx2i_hba *hba)
+{
+ u32 num_elements_per_pg;
+
+ if (test_bit(BNX2I_NX2_DEV_5706, &hba->cnic_dev_type) ||
+ test_bit(BNX2I_NX2_DEV_5708, &hba->cnic_dev_type) ||
+ test_bit(BNX2I_NX2_DEV_5709, &hba->cnic_dev_type)) {
+ if (!is_power_of_2(hba->max_sqes))
+ hba->max_sqes = rounddown_pow_of_two(hba->max_sqes);
+
+ if (!is_power_of_2(hba->max_rqes))
+ hba->max_rqes = rounddown_pow_of_two(hba->max_rqes);
+ }
+
+ /* Adjust each queue size if the user selection does not
+ * yield integral num of page buffers
+ */
+ /* adjust SQ */
+ num_elements_per_pg = PAGE_SIZE / BNX2I_SQ_WQE_SIZE;
+ if (hba->max_sqes < num_elements_per_pg)
+ hba->max_sqes = num_elements_per_pg;
+ else if (hba->max_sqes % num_elements_per_pg)
+ hba->max_sqes = (hba->max_sqes + num_elements_per_pg - 1) &
+ ~(num_elements_per_pg - 1);
+
+ /* adjust CQ */
+ num_elements_per_pg = PAGE_SIZE / BNX2I_CQE_SIZE;
+ if (hba->max_cqes < num_elements_per_pg)
+ hba->max_cqes = num_elements_per_pg;
+ else if (hba->max_cqes % num_elements_per_pg)
+ hba->max_cqes = (hba->max_cqes + num_elements_per_pg - 1) &
+ ~(num_elements_per_pg - 1);
+
+ /* adjust RQ */
+ num_elements_per_pg = PAGE_SIZE / BNX2I_RQ_WQE_SIZE;
+ if (hba->max_rqes < num_elements_per_pg)
+ hba->max_rqes = num_elements_per_pg;
+ else if (hba->max_rqes % num_elements_per_pg)
+ hba->max_rqes = (hba->max_rqes + num_elements_per_pg - 1) &
+ ~(num_elements_per_pg - 1);
+}
+
+
+/**
+ * bnx2i_get_link_state - get network interface link state
+ * @hba: adapter instance pointer
+ *
+ * updates adapter structure flag based on netdev state
+ */
+static void bnx2i_get_link_state(struct bnx2i_hba *hba)
+{
+ if (test_bit(__LINK_STATE_NOCARRIER, &hba->netdev->state))
+ set_bit(ADAPTER_STATE_LINK_DOWN, &hba->adapter_state);
+ else
+ clear_bit(ADAPTER_STATE_LINK_DOWN, &hba->adapter_state);
+}
+
+
+/**
+ * bnx2i_iscsi_license_error - displays iscsi license related error message
+ * @hba: adapter instance pointer
+ * @error_code: error classification
+ *
+ * Puts out an error log when driver is unable to offload iscsi connection
+ * due to license restrictions
+ */
+static void bnx2i_iscsi_license_error(struct bnx2i_hba *hba, u32 error_code)
+{
+ if (error_code == ISCSI_KCQE_COMPLETION_STATUS_ISCSI_NOT_SUPPORTED)
+ /* iSCSI offload not supported on this device */
+ printk(KERN_ERR "bnx2i: iSCSI not supported, dev=%s\n",
+ hba->netdev->name);
+ if (error_code == ISCSI_KCQE_COMPLETION_STATUS_LOM_ISCSI_NOT_ENABLED)
+ /* iSCSI offload not supported on this LOM device */
+ printk(KERN_ERR "bnx2i: LOM is not enable to "
+ "offload iSCSI connections, dev=%s\n",
+ hba->netdev->name);
+ set_bit(ADAPTER_STATE_INIT_FAILED, &hba->adapter_state);
+}
+
+
+/**
+ * bnx2i_arm_cq_event_coalescing - arms CQ to enable EQ notification
+ * @ep: endpoint (transport indentifier) structure
+ * @action: action, ARM or DISARM. For now only ARM_CQE is used
+ *
+ * Arm'ing CQ will enable chip to generate global EQ events inorder to interrupt
+ * the driver. EQ event is generated CQ index is hit or at least 1 CQ is
+ * outstanding and on chip timer expires
+ */
+void bnx2i_arm_cq_event_coalescing(struct bnx2i_endpoint *ep, u8 action)
+{
+ struct bnx2i_5771x_cq_db *cq_db;
+ u16 cq_index;
+
+ if (!test_bit(BNX2I_NX2_DEV_57710, &ep->hba->cnic_dev_type))
+ return;
+
+ if (action == CNIC_ARM_CQE) {
+ cq_index = ep->qp.cqe_exp_seq_sn +
+ ep->num_active_cmds / event_coal_div;
+ cq_index %= (ep->qp.cqe_size * 2 + 1);
+ if (!cq_index) {
+ cq_index = 1;
+ cq_db = (struct bnx2i_5771x_cq_db *)
+ ep->qp.cq_pgtbl_virt;
+ cq_db->sqn[0] = cq_index;
+ }
+ }
+}
+
+
+/**
+ * bnx2i_get_rq_buf - copy RQ buffer contents to driver buffer
+ * @conn: iscsi connection on which RQ event occured
+ * @ptr: driver buffer to which RQ buffer contents is to
+ * be copied
+ * @len: length of valid data inside RQ buf
+ *
+ * Copies RQ buffer contents from shared (DMA'able) memory region to
+ * driver buffer. RQ is used to DMA unsolicitated iscsi pdu's and
+ * scsi sense info
+ */
+void bnx2i_get_rq_buf(struct bnx2i_conn *bnx2i_conn, char *ptr, int len)
+{
+ if (!bnx2i_conn->ep->qp.rqe_left)
+ return;
+
+ bnx2i_conn->ep->qp.rqe_left--;
+ memcpy(ptr, (u8 *) bnx2i_conn->ep->qp.rq_cons_qe, len);
+ if (bnx2i_conn->ep->qp.rq_cons_qe == bnx2i_conn->ep->qp.rq_last_qe) {
+ bnx2i_conn->ep->qp.rq_cons_qe = bnx2i_conn->ep->qp.rq_first_qe;
+ bnx2i_conn->ep->qp.rq_cons_idx = 0;
+ } else {
+ bnx2i_conn->ep->qp.rq_cons_qe++;
+ bnx2i_conn->ep->qp.rq_cons_idx++;
+ }
+}
+
+
+static void bnx2i_ring_577xx_doorbell(struct bnx2i_conn *conn)
+{
+ struct bnx2i_5771x_dbell dbell;
+ u32 msg;
+
+ memset(&dbell, 0, sizeof(dbell));
+ dbell.dbell.header = (B577XX_ISCSI_CONNECTION_TYPE <<
+ B577XX_DOORBELL_HDR_CONN_TYPE_SHIFT);
+ msg = *((u32 *)&dbell);
+ /* TODO : get doorbell register mapping */
+ writel(cpu_to_le32(msg), conn->ep->qp.ctx_base);
+}
+
+
+/**
+ * bnx2i_put_rq_buf - Replenish RQ buffer, if required ring on chip doorbell
+ * @conn: iscsi connection on which event to post
+ * @count: number of RQ buffer being posted to chip
+ *
+ * No need to ring hardware doorbell for 57710 family of devices
+ */
+void bnx2i_put_rq_buf(struct bnx2i_conn *bnx2i_conn, int count)
+{
+ struct bnx2i_5771x_sq_rq_db *rq_db;
+ u16 hi_bit = (bnx2i_conn->ep->qp.rq_prod_idx & 0x8000);
+ struct bnx2i_endpoint *ep = bnx2i_conn->ep;
+
+ ep->qp.rqe_left += count;
+ ep->qp.rq_prod_idx &= 0x7FFF;
+ ep->qp.rq_prod_idx += count;
+
+ if (ep->qp.rq_prod_idx > bnx2i_conn->hba->max_rqes) {
+ ep->qp.rq_prod_idx %= bnx2i_conn->hba->max_rqes;
+ if (!hi_bit)
+ ep->qp.rq_prod_idx |= 0x8000;
+ } else
+ ep->qp.rq_prod_idx |= hi_bit;
+
+ if (test_bit(BNX2I_NX2_DEV_57710, &ep->hba->cnic_dev_type)) {
+ rq_db = (struct bnx2i_5771x_sq_rq_db *) ep->qp.rq_pgtbl_virt;
+ rq_db->prod_idx = ep->qp.rq_prod_idx;
+ /* no need to ring hardware doorbell for 57710 */
+ } else {
+ writew(ep->qp.rq_prod_idx,
+ ep->qp.ctx_base + CNIC_RECV_DOORBELL);
+ }
+ mmiowb();
+}
+
+
+/**
+ * bnx2i_ring_sq_dbell - Ring SQ doorbell to wake-up the processing engine
+ * @conn: iscsi connection to which new SQ entries belong
+ * @count: number of SQ WQEs to post
+ *
+ * SQ DB is updated in host memory and TX Doorbell is rung for 57710 family
+ * of devices. For 5706/5708/5709 new SQ WQE count is written into the
+ * doorbell register
+ */
+static void bnx2i_ring_sq_dbell(struct bnx2i_conn *bnx2i_conn, int count)
+{
+ struct bnx2i_5771x_sq_rq_db *sq_db;
+ struct bnx2i_endpoint *ep = bnx2i_conn->ep;
+
+ ep->num_active_cmds++;
+ wmb(); /* flush SQ WQE memory before the doorbell is rung */
+ if (test_bit(BNX2I_NX2_DEV_57710, &ep->hba->cnic_dev_type)) {
+ sq_db = (struct bnx2i_5771x_sq_rq_db *) ep->qp.sq_pgtbl_virt;
+ sq_db->prod_idx = ep->qp.sq_prod_idx;
+ bnx2i_ring_577xx_doorbell(bnx2i_conn);
+ } else
+ writew(count, ep->qp.ctx_base + CNIC_SEND_DOORBELL);
+
+ mmiowb(); /* flush posted PCI writes */
+}
+
+
+/**
+ * bnx2i_ring_dbell_update_sq_params - update SQ driver parameters
+ * @conn: iscsi connection to which new SQ entries belong
+ * @count: number of SQ WQEs to post
+ *
+ * this routine will update SQ driver parameters and ring the doorbell
+ */
+static void bnx2i_ring_dbell_update_sq_params(struct bnx2i_conn *bnx2i_conn,
+ int count)
+{
+ int tmp_cnt;
+
+ if (count == 1) {
+ if (bnx2i_conn->ep->qp.sq_prod_qe ==
+ bnx2i_conn->ep->qp.sq_last_qe)
+ bnx2i_conn->ep->qp.sq_prod_qe =
+ bnx2i_conn->ep->qp.sq_first_qe;
+ else
+ bnx2i_conn->ep->qp.sq_prod_qe++;
+ } else {
+ if ((bnx2i_conn->ep->qp.sq_prod_qe + count) <=
+ bnx2i_conn->ep->qp.sq_last_qe)
+ bnx2i_conn->ep->qp.sq_prod_qe += count;
+ else {
+ tmp_cnt = bnx2i_conn->ep->qp.sq_last_qe -
+ bnx2i_conn->ep->qp.sq_prod_qe;
+ bnx2i_conn->ep->qp.sq_prod_qe =
+ &bnx2i_conn->ep->qp.sq_first_qe[count -
+ (tmp_cnt + 1)];
+ }
+ }
+ bnx2i_conn->ep->qp.sq_prod_idx += count;
+ /* Ring the doorbell */
+ bnx2i_ring_sq_dbell(bnx2i_conn, bnx2i_conn->ep->qp.sq_prod_idx);
+}
+
+
+/**
+ * bnx2i_send_iscsi_login - post iSCSI login request MP WQE to hardware
+ * @conn: iscsi connection
+ * @cmd: driver command structure which is requesting
+ * a WQE to sent to chip for further processing
+ *
+ * prepare and post an iSCSI Login request WQE to CNIC firmware
+ */
+int bnx2i_send_iscsi_login(struct bnx2i_conn *bnx2i_conn,
+ struct iscsi_task *task)
+{
+ struct bnx2i_cmd *bnx2i_cmd;
+ struct bnx2i_login_request *login_wqe;
+ struct iscsi_login *login_hdr;
+ u32 dword;
+
+ bnx2i_cmd = (struct bnx2i_cmd *)task->dd_data;
+ login_hdr = (struct iscsi_login *)task->hdr;
+ login_wqe = (struct bnx2i_login_request *)
+ bnx2i_conn->ep->qp.sq_prod_qe;
+
+ login_wqe->op_code = login_hdr->opcode;
+ login_wqe->op_attr = login_hdr->flags;
+ login_wqe->version_max = login_hdr->max_version;
+ login_wqe->version_min = login_hdr->min_version;
+ login_wqe->data_length = ntoh24(login_hdr->dlength);
+ login_wqe->isid_lo = *((u32 *) login_hdr->isid);
+ login_wqe->isid_hi = *((u16 *) login_hdr->isid + 2);
+ login_wqe->tsih = login_hdr->tsih;
+ login_wqe->itt = task->itt |
+ (ISCSI_TASK_TYPE_MPATH << ISCSI_LOGIN_REQUEST_TYPE_SHIFT);
+ login_wqe->cid = login_hdr->cid;
+
+ login_wqe->cmd_sn = be32_to_cpu(login_hdr->cmdsn);
+ login_wqe->exp_stat_sn = be32_to_cpu(login_hdr->exp_statsn);
+
+ login_wqe->resp_bd_list_addr_lo = (u32) bnx2i_conn->gen_pdu.resp_bd_dma;
+ login_wqe->resp_bd_list_addr_hi =
+ (u32) ((u64) bnx2i_conn->gen_pdu.resp_bd_dma >> 32);
+
+ dword = ((1 << ISCSI_LOGIN_REQUEST_NUM_RESP_BDS_SHIFT) |
+ (bnx2i_conn->gen_pdu.resp_buf_size <<
+ ISCSI_LOGIN_REQUEST_RESP_BUFFER_LENGTH_SHIFT));
+ login_wqe->resp_buffer = dword;
+ login_wqe->flags = 0;
+ login_wqe->bd_list_addr_lo = (u32) bnx2i_conn->gen_pdu.req_bd_dma;
+ login_wqe->bd_list_addr_hi =
+ (u32) ((u64) bnx2i_conn->gen_pdu.req_bd_dma >> 32);
+ login_wqe->num_bds = 1;
+ login_wqe->cq_index = 0; /* CQ# used for completion, 5771x only */
+
+ bnx2i_ring_dbell_update_sq_params(bnx2i_conn, 1);
+ return 0;
+}
+
+/**
+ * bnx2i_send_iscsi_tmf - post iSCSI task management request MP WQE to hardware
+ * @conn: iscsi connection
+ * @mtask: driver command structure which is requesting
+ * a WQE to sent to chip for further processing
+ *
+ * prepare and post an iSCSI Login request WQE to CNIC firmware
+ */
+int bnx2i_send_iscsi_tmf(struct bnx2i_conn *bnx2i_conn,
+ struct iscsi_task *mtask)
+{
+ struct iscsi_conn *conn = bnx2i_conn->cls_conn->dd_data;
+ struct iscsi_tm *tmfabort_hdr;
+ struct scsi_cmnd *ref_sc;
+ struct iscsi_task *ctask;
+ struct bnx2i_cmd *bnx2i_cmd;
+ struct bnx2i_tmf_request *tmfabort_wqe;
+ u32 dword;
+
+ bnx2i_cmd = (struct bnx2i_cmd *)mtask->dd_data;
+ tmfabort_hdr = (struct iscsi_tm *)mtask->hdr;
+ tmfabort_wqe = (struct bnx2i_tmf_request *)
+ bnx2i_conn->ep->qp.sq_prod_qe;
+
+ tmfabort_wqe->op_code = tmfabort_hdr->opcode;
+ tmfabort_wqe->op_attr = 0;
+ tmfabort_wqe->op_attr =
+ ISCSI_TMF_REQUEST_ALWAYS_ONE | ISCSI_TM_FUNC_ABORT_TASK;
+ tmfabort_wqe->lun[0] = be32_to_cpu(tmfabort_hdr->lun[0]);
+ tmfabort_wqe->lun[1] = be32_to_cpu(tmfabort_hdr->lun[1]);
+
+ tmfabort_wqe->itt = (mtask->itt | (ISCSI_TASK_TYPE_MPATH << 14));
+ tmfabort_wqe->reserved2 = 0;
+ tmfabort_wqe->cmd_sn = be32_to_cpu(tmfabort_hdr->cmdsn);
+
+ ctask = iscsi_itt_to_task(conn, tmfabort_hdr->rtt);
+ if (!ctask || ctask->sc)
+ /*
+ * the iscsi layer must have completed the cmd while this
+ * was starting up.
+ */
+ return 0;
+ ref_sc = ctask->sc;
+
+ if (ref_sc->sc_data_direction == DMA_TO_DEVICE)
+ dword = (ISCSI_TASK_TYPE_WRITE << ISCSI_CMD_REQUEST_TYPE_SHIFT);
+ else
+ dword = (ISCSI_TASK_TYPE_READ << ISCSI_CMD_REQUEST_TYPE_SHIFT);
+ tmfabort_wqe->ref_itt = (dword | tmfabort_hdr->rtt);
+ tmfabort_wqe->ref_cmd_sn = be32_to_cpu(tmfabort_hdr->refcmdsn);
+
+ tmfabort_wqe->bd_list_addr_lo = (u32) bnx2i_conn->hba->mp_bd_dma;
+ tmfabort_wqe->bd_list_addr_hi = (u32)
+ ((u64) bnx2i_conn->hba->mp_bd_dma >> 32);
+ tmfabort_wqe->num_bds = 1;
+ tmfabort_wqe->cq_index = 0; /* CQ# used for completion, 5771x only */
+
+ bnx2i_ring_dbell_update_sq_params(bnx2i_conn, 1);
+ return 0;
+}
+
+/**
+ * bnx2i_send_iscsi_scsicmd - post iSCSI scsicmd request WQE to hardware
+ * @conn: iscsi connection
+ * @cmd: driver command structure which is requesting
+ * a WQE to sent to chip for further processing
+ *
+ * prepare and post an iSCSI SCSI-CMD request WQE to CNIC firmware
+ */
+int bnx2i_send_iscsi_scsicmd(struct bnx2i_conn *bnx2i_conn,
+ struct bnx2i_cmd *cmd)
+{
+ struct bnx2i_cmd_request *scsi_cmd_wqe;
+
+ scsi_cmd_wqe = (struct bnx2i_cmd_request *)
+ bnx2i_conn->ep->qp.sq_prod_qe;
+ memcpy(scsi_cmd_wqe, &cmd->req, sizeof(struct bnx2i_cmd_request));
+ scsi_cmd_wqe->cq_index = 0; /* CQ# used for completion, 5771x only */
+
+ bnx2i_ring_dbell_update_sq_params(bnx2i_conn, 1);
+ return 0;
+}
+
+/**
+ * bnx2i_send_iscsi_nopout - post iSCSI NOPOUT request WQE to hardware
+ * @conn: iscsi connection
+ * @cmd: driver command structure which is requesting
+ * a WQE to sent to chip for further processing
+ * @ttt: TTT to be used when building pdu header
+ * @datap: payload buffer pointer
+ * @data_len: payload data length
+ * @unsol: indicated whether nopout pdu is unsolicited pdu or
+ * in response to target's NOPIN w/ TTT != FFFFFFFF
+ *
+ * prepare and post a nopout request WQE to CNIC firmware
+ */
+int bnx2i_send_iscsi_nopout(struct bnx2i_conn *bnx2i_conn,
+ struct iscsi_task *task, u32 ttt,
+ char *datap, int data_len, int unsol)
+{
+ struct bnx2i_endpoint *ep = bnx2i_conn->ep;
+ struct bnx2i_cmd *bnx2i_cmd;
+ struct bnx2i_nop_out_request *nopout_wqe;
+ struct iscsi_nopout *nopout_hdr;
+
+ bnx2i_cmd = (struct bnx2i_cmd *)task->dd_data;
+ nopout_hdr = (struct iscsi_nopout *)task->hdr;
+ nopout_wqe = (struct bnx2i_nop_out_request *)ep->qp.sq_prod_qe;
+ nopout_wqe->op_code = nopout_hdr->opcode;
+ nopout_wqe->op_attr = ISCSI_FLAG_CMD_FINAL;
+ memcpy(nopout_wqe->lun, nopout_hdr->lun, 8);
+
+ if (test_bit(BNX2I_NX2_DEV_57710, &ep->hba->cnic_dev_type)) {
+ u32 tmp = nopout_hdr->lun[0];
+ /* 57710 requires LUN field to be swapped */
+ nopout_hdr->lun[0] = nopout_hdr->lun[1];
+ nopout_hdr->lun[1] = tmp;
+ }
+
+ nopout_wqe->itt = ((u16)task->itt |
+ (ISCSI_TASK_TYPE_MPATH <<
+ ISCSI_TMF_REQUEST_TYPE_SHIFT));
+ nopout_wqe->ttt = ttt;
+ nopout_wqe->flags = 0;
+ if (!unsol)
+ nopout_wqe->flags = ISCSI_NOP_OUT_REQUEST_LOCAL_COMPLETION;
+ else if (nopout_hdr->itt == RESERVED_ITT)
+ nopout_wqe->flags = ISCSI_NOP_OUT_REQUEST_LOCAL_COMPLETION;
+
+ nopout_wqe->cmd_sn = be32_to_cpu(nopout_hdr->cmdsn);
+ nopout_wqe->data_length = data_len;
+ if (data_len) {
+ /* handle payload data, not required in first release */
+ printk(KERN_ALERT "NOPOUT: WARNING!! payload len != 0\n");
+ } else {
+ nopout_wqe->bd_list_addr_lo = (u32)
+ bnx2i_conn->hba->mp_bd_dma;
+ nopout_wqe->bd_list_addr_hi =
+ (u32) ((u64) bnx2i_conn->hba->mp_bd_dma >> 32);
+ nopout_wqe->num_bds = 1;
+ }
+ nopout_wqe->cq_index = 0; /* CQ# used for completion, 5771x only */
+
+ bnx2i_ring_dbell_update_sq_params(bnx2i_conn, 1);
+ return 0;
+}
+
+
+/**
+ * bnx2i_send_iscsi_logout - post iSCSI logout request WQE to hardware
+ * @conn: iscsi connection
+ * @cmd: driver command structure which is requesting
+ * a WQE to sent to chip for further processing
+ *
+ * prepare and post logout request WQE to CNIC firmware
+ */
+int bnx2i_send_iscsi_logout(struct bnx2i_conn *bnx2i_conn,
+ struct iscsi_task *task)
+{
+ struct bnx2i_cmd *bnx2i_cmd;
+ struct bnx2i_logout_request *logout_wqe;
+ struct iscsi_logout *logout_hdr;
+
+ bnx2i_cmd = (struct bnx2i_cmd *)task->dd_data;
+ logout_hdr = (struct iscsi_logout *)task->hdr;
+
+ logout_wqe = (struct bnx2i_logout_request *)
+ bnx2i_conn->ep->qp.sq_prod_qe;
+ memset(logout_wqe, 0x00, sizeof(struct bnx2i_logout_request));
+
+ logout_wqe->op_code = logout_hdr->opcode;
+ logout_wqe->cmd_sn = be32_to_cpu(logout_hdr->cmdsn);
+ logout_wqe->op_attr =
+ logout_hdr->flags | ISCSI_LOGOUT_REQUEST_ALWAYS_ONE;
+ logout_wqe->itt = ((u16)task->itt |
+ (ISCSI_TASK_TYPE_MPATH <<
+ ISCSI_LOGOUT_REQUEST_TYPE_SHIFT));
+ logout_wqe->data_length = 0;
+ logout_wqe->cid = 0;
+
+ logout_wqe->bd_list_addr_lo = (u32) bnx2i_conn->hba->mp_bd_dma;
+ logout_wqe->bd_list_addr_hi = (u32)
+ ((u64) bnx2i_conn->hba->mp_bd_dma >> 32);
+ logout_wqe->num_bds = 1;
+ logout_wqe->cq_index = 0; /* CQ# used for completion, 5771x only */
+
+ bnx2i_ring_dbell_update_sq_params(bnx2i_conn, 1);
+ return 0;
+}
+
+
+/**
+ * bnx2i_update_iscsi_conn - post iSCSI logout request WQE to hardware
+ * @conn: iscsi connection which requires iscsi parameter update
+ *
+ * sends down iSCSI Conn Update request to move iSCSI conn to FFP
+ */
+void bnx2i_update_iscsi_conn(struct iscsi_conn *conn)
+{
+ struct bnx2i_conn *bnx2i_conn = conn->dd_data;
+ struct bnx2i_hba *hba = bnx2i_conn->hba;
+ struct kwqe *kwqe_arr[2];
+ struct iscsi_kwqe_conn_update *update_wqe;
+ struct iscsi_kwqe_conn_update conn_update_kwqe;
+
+ update_wqe = &conn_update_kwqe;
+
+ update_wqe->hdr.op_code = ISCSI_KWQE_OPCODE_UPDATE_CONN;
+ update_wqe->hdr.flags =
+ (ISCSI_KWQE_LAYER_CODE << ISCSI_KWQE_HEADER_LAYER_CODE_SHIFT);
+
+ /* 5771x requires conn context id to be passed as is */
+ if (test_bit(BNX2I_NX2_DEV_57710, &bnx2i_conn->ep->hba->cnic_dev_type))
+ update_wqe->context_id = bnx2i_conn->ep->ep_cid;
+ else
+ update_wqe->context_id = (bnx2i_conn->ep->ep_cid >> 7);
+ update_wqe->conn_flags = 0;
+ if (conn->hdrdgst_en)
+ update_wqe->conn_flags |= ISCSI_KWQE_CONN_UPDATE_HEADER_DIGEST;
+ if (conn->datadgst_en)
+ update_wqe->conn_flags |= ISCSI_KWQE_CONN_UPDATE_DATA_DIGEST;
+ if (conn->session->initial_r2t_en)
+ update_wqe->conn_flags |= ISCSI_KWQE_CONN_UPDATE_INITIAL_R2T;
+ if (conn->session->imm_data_en)
+ update_wqe->conn_flags |= ISCSI_KWQE_CONN_UPDATE_IMMEDIATE_DATA;
+
+ update_wqe->max_send_pdu_length = conn->max_xmit_dlength;
+ update_wqe->max_recv_pdu_length = conn->max_recv_dlength;
+ update_wqe->first_burst_length = conn->session->first_burst;
+ update_wqe->max_burst_length = conn->session->max_burst;
+ update_wqe->exp_stat_sn = conn->exp_statsn;
+ update_wqe->max_outstanding_r2ts = conn->session->max_r2t;
+ update_wqe->session_error_recovery_level = conn->session->erl;
+ iscsi_conn_printk(KERN_ALERT, conn,
+ "bnx2i: conn update - MBL 0x%x FBL 0x%x"
+ "MRDSL_I 0x%x MRDSL_T 0x%x \n",
+ update_wqe->max_burst_length,
+ update_wqe->first_burst_length,
+ update_wqe->max_recv_pdu_length,
+ update_wqe->max_send_pdu_length);
+
+ kwqe_arr[0] = (struct kwqe *) update_wqe;
+ if (hba->cnic && hba->cnic->submit_kwqes)
+ hba->cnic->submit_kwqes(hba->cnic, kwqe_arr, 1);
+}
+
+
+/**
+ * bnx2i_ep_ofld_timer - post iSCSI logout request WQE to hardware
+ * @data: endpoint (transport handle) structure pointer
+ *
+ * routine to handle connection offload/destroy request timeout
+ */
+void bnx2i_ep_ofld_timer(unsigned long data)
+{
+ struct bnx2i_endpoint *ep = (struct bnx2i_endpoint *) data;
+
+ if (ep->state == EP_STATE_OFLD_START) {
+ printk(KERN_ALERT "ofld_timer: CONN_OFLD timeout\n");
+ ep->state = EP_STATE_OFLD_FAILED;
+ } else if (ep->state == EP_STATE_DISCONN_START) {
+ printk(KERN_ALERT "ofld_timer: CONN_DISCON timeout\n");
+ ep->state = EP_STATE_DISCONN_TIMEDOUT;
+ } else if (ep->state == EP_STATE_CLEANUP_START) {
+ printk(KERN_ALERT "ofld_timer: CONN_CLEANUP timeout\n");
+ ep->state = EP_STATE_CLEANUP_FAILED;
+ }
+
+ wake_up_interruptible(&ep->ofld_wait);
+}
+
+
+static int bnx2i_power_of2(u32 val)
+{
+ u32 power = 0;
+ if (val & (val - 1))
+ return power;
+ val--;
+ while (val) {
+ val = val >> 1;
+ power++;
+ }
+ return power;
+}
+
+
+/**
+ * bnx2i_send_cmd_cleanup_req - send iscsi cmd context clean-up request
+ * @hba: adapter structure pointer
+ * @cmd: driver command structure which is requesting
+ * a WQE to sent to chip for further processing
+ *
+ * prepares and posts CONN_OFLD_REQ1/2 KWQE
+ */
+void bnx2i_send_cmd_cleanup_req(struct bnx2i_hba *hba, struct bnx2i_cmd *cmd)
+{
+ struct bnx2i_cleanup_request *cmd_cleanup;
+
+ cmd_cleanup =
+ (struct bnx2i_cleanup_request *)cmd->conn->ep->qp.sq_prod_qe;
+ memset(cmd_cleanup, 0x00, sizeof(struct bnx2i_cleanup_request));
+
+ cmd_cleanup->op_code = ISCSI_OPCODE_CLEANUP_REQUEST;
+ cmd_cleanup->itt = cmd->req.itt;
+ cmd_cleanup->cq_index = 0; /* CQ# used for completion, 5771x only */
+
+ bnx2i_ring_dbell_update_sq_params(cmd->conn, 1);
+}
+
+
+/**
+ * bnx2i_send_conn_destroy - initiates iscsi connection teardown process
+ * @hba: adapter structure pointer
+ * @ep: endpoint (transport indentifier) structure
+ *
+ * this routine prepares and posts CONN_OFLD_REQ1/2 KWQE to initiate
+ * iscsi connection context clean-up process
+ */
+void bnx2i_send_conn_destroy(struct bnx2i_hba *hba, struct bnx2i_endpoint *ep)
+{
+ struct kwqe *kwqe_arr[2];
+ struct iscsi_kwqe_conn_destroy conn_cleanup;
+
+ memset(&conn_cleanup, 0x00, sizeof(struct iscsi_kwqe_conn_destroy));
+
+ conn_cleanup.hdr.op_code = ISCSI_KWQE_OPCODE_DESTROY_CONN;
+ conn_cleanup.hdr.flags =
+ (ISCSI_KWQE_LAYER_CODE << ISCSI_KWQE_HEADER_LAYER_CODE_SHIFT);
+ /* 5771x requires conn context id to be passed as is */
+ if (test_bit(BNX2I_NX2_DEV_57710, &ep->hba->cnic_dev_type))
+ conn_cleanup.context_id = ep->ep_cid;
+ else
+ conn_cleanup.context_id = (ep->ep_cid >> 7);
+
+ conn_cleanup.reserved0 = (u16)ep->ep_iscsi_cid;
+
+ kwqe_arr[0] = (struct kwqe *) &conn_cleanup;
+ if (hba->cnic && hba->cnic->submit_kwqes)
+ hba->cnic->submit_kwqes(hba->cnic, kwqe_arr, 1);
+}
+
+
+/**
+ * bnx2i_570x_send_conn_ofld_req - initiates iscsi conn context setup process
+ * @hba: adapter structure pointer
+ * @ep: endpoint (transport indentifier) structure
+ *
+ * 5706/5708/5709 specific - prepares and posts CONN_OFLD_REQ1/2 KWQE
+ */
+static void bnx2i_570x_send_conn_ofld_req(struct bnx2i_hba *hba,
+ struct bnx2i_endpoint *ep)
+{
+ struct kwqe *kwqe_arr[2];
+ struct iscsi_kwqe_conn_offload1 ofld_req1;
+ struct iscsi_kwqe_conn_offload2 ofld_req2;
+ dma_addr_t dma_addr;
+ int num_kwqes = 2;
+ u32 *ptbl;
+
+ ofld_req1.hdr.op_code = ISCSI_KWQE_OPCODE_OFFLOAD_CONN1;
+ ofld_req1.hdr.flags =
+ (ISCSI_KWQE_LAYER_CODE << ISCSI_KWQE_HEADER_LAYER_CODE_SHIFT);
+
+ ofld_req1.iscsi_conn_id = (u16) ep->ep_iscsi_cid;
+
+ dma_addr = ep->qp.sq_pgtbl_phys;
+ ofld_req1.sq_page_table_addr_lo = (u32) dma_addr;
+ ofld_req1.sq_page_table_addr_hi = (u32) ((u64) dma_addr >> 32);
+
+ dma_addr = ep->qp.cq_pgtbl_phys;
+ ofld_req1.cq_page_table_addr_lo = (u32) dma_addr;
+ ofld_req1.cq_page_table_addr_hi = (u32) ((u64) dma_addr >> 32);
+
+ ofld_req2.hdr.op_code = ISCSI_KWQE_OPCODE_OFFLOAD_CONN2;
+ ofld_req2.hdr.flags =
+ (ISCSI_KWQE_LAYER_CODE << ISCSI_KWQE_HEADER_LAYER_CODE_SHIFT);
+
+ dma_addr = ep->qp.rq_pgtbl_phys;
+ ofld_req2.rq_page_table_addr_lo = (u32) dma_addr;
+ ofld_req2.rq_page_table_addr_hi = (u32) ((u64) dma_addr >> 32);
+
+ ptbl = (u32 *) ep->qp.sq_pgtbl_virt;
+
+ ofld_req2.sq_first_pte.hi = *ptbl++;
+ ofld_req2.sq_first_pte.lo = *ptbl;
+
+ ptbl = (u32 *) ep->qp.cq_pgtbl_virt;
+ ofld_req2.cq_first_pte.hi = *ptbl++;
+ ofld_req2.cq_first_pte.lo = *ptbl;
+
+ kwqe_arr[0] = (struct kwqe *) &ofld_req1;
+ kwqe_arr[1] = (struct kwqe *) &ofld_req2;
+ ofld_req2.num_additional_wqes = 0;
+
+ if (hba->cnic && hba->cnic->submit_kwqes)
+ hba->cnic->submit_kwqes(hba->cnic, kwqe_arr, num_kwqes);
+}
+
+
+/**
+ * bnx2i_5771x_send_conn_ofld_req - initiates iscsi connection context creation
+ * @hba: adapter structure pointer
+ * @ep: endpoint (transport indentifier) structure
+ *
+ * 57710 specific - prepares and posts CONN_OFLD_REQ1/2 KWQE
+ */
+static void bnx2i_5771x_send_conn_ofld_req(struct bnx2i_hba *hba,
+ struct bnx2i_endpoint *ep)
+{
+ struct kwqe *kwqe_arr[5];
+ struct iscsi_kwqe_conn_offload1 ofld_req1;
+ struct iscsi_kwqe_conn_offload2 ofld_req2;
+ struct iscsi_kwqe_conn_offload3 ofld_req3[1];
+ dma_addr_t dma_addr;
+ int num_kwqes = 2;
+ u32 *ptbl;
+
+ ofld_req1.hdr.op_code = ISCSI_KWQE_OPCODE_OFFLOAD_CONN1;
+ ofld_req1.hdr.flags =
+ (ISCSI_KWQE_LAYER_CODE << ISCSI_KWQE_HEADER_LAYER_CODE_SHIFT);
+
+ ofld_req1.iscsi_conn_id = (u16) ep->ep_iscsi_cid;
+
+ dma_addr = ep->qp.sq_pgtbl_phys + ISCSI_SQ_DB_SIZE;
+ ofld_req1.sq_page_table_addr_lo = (u32) dma_addr;
+ ofld_req1.sq_page_table_addr_hi = (u32) ((u64) dma_addr >> 32);
+
+ dma_addr = ep->qp.cq_pgtbl_phys + ISCSI_CQ_DB_SIZE;
+ ofld_req1.cq_page_table_addr_lo = (u32) dma_addr;
+ ofld_req1.cq_page_table_addr_hi = (u32) ((u64) dma_addr >> 32);
+
+ ofld_req2.hdr.op_code = ISCSI_KWQE_OPCODE_OFFLOAD_CONN2;
+ ofld_req2.hdr.flags =
+ (ISCSI_KWQE_LAYER_CODE << ISCSI_KWQE_HEADER_LAYER_CODE_SHIFT);
+
+ dma_addr = ep->qp.rq_pgtbl_phys + ISCSI_RQ_DB_SIZE;
+ ofld_req2.rq_page_table_addr_lo = (u32) dma_addr;
+ ofld_req2.rq_page_table_addr_hi = (u32) ((u64) dma_addr >> 32);
+
+ ptbl = (u32 *)((u8 *)ep->qp.sq_pgtbl_virt + ISCSI_SQ_DB_SIZE);
+ ofld_req2.sq_first_pte.hi = *ptbl++;
+ ofld_req2.sq_first_pte.lo = *ptbl;
+
+ ptbl = (u32 *)((u8 *)ep->qp.cq_pgtbl_virt + ISCSI_CQ_DB_SIZE);
+ ofld_req2.cq_first_pte.hi = *ptbl++;
+ ofld_req2.cq_first_pte.lo = *ptbl;
+
+ kwqe_arr[0] = (struct kwqe *) &ofld_req1;
+ kwqe_arr[1] = (struct kwqe *) &ofld_req2;
+
+ ofld_req2.num_additional_wqes = 1;
+ memset(ofld_req3, 0x00, sizeof(ofld_req3[0]));
+ ptbl = (u32 *)((u8 *)ep->qp.rq_pgtbl_virt + ISCSI_RQ_DB_SIZE);
+ ofld_req3[0].qp_first_pte[0].hi = *ptbl++;
+ ofld_req3[0].qp_first_pte[0].lo = *ptbl;
+
+ kwqe_arr[2] = (struct kwqe *) ofld_req3;
+ /* need if we decide to go with multiple KCQE's per conn */
+ num_kwqes += 1;
+
+ if (hba->cnic && hba->cnic->submit_kwqes)
+ hba->cnic->submit_kwqes(hba->cnic, kwqe_arr, num_kwqes);
+}
+
+/**
+ * bnx2i_send_conn_ofld_req - initiates iscsi connection context setup process
+ *
+ * @hba: adapter structure pointer
+ * @ep: endpoint (transport indentifier) structure
+ *
+ * this routine prepares and posts CONN_OFLD_REQ1/2 KWQE
+ */
+void bnx2i_send_conn_ofld_req(struct bnx2i_hba *hba, struct bnx2i_endpoint *ep)
+{
+ if (test_bit(BNX2I_NX2_DEV_57710, &hba->cnic_dev_type))
+ bnx2i_5771x_send_conn_ofld_req(hba, ep);
+ else
+ bnx2i_570x_send_conn_ofld_req(hba, ep);
+}
+
+
+/**
+ * setup_qp_page_tables - iscsi QP page table setup function
+ * @ep: endpoint (transport indentifier) structure
+ *
+ * Sets up page tables for SQ/RQ/CQ, 1G/sec (5706/5708/5709) devices requires
+ * 64-bit address in big endian format. Whereas 10G/sec (57710) requires
+ * PT in little endian format
+ */
+static void setup_qp_page_tables(struct bnx2i_endpoint *ep)
+{
+ int num_pages;
+ u32 *ptbl;
+ dma_addr_t page;
+ int cnic_dev_10g;
+
+ if (test_bit(BNX2I_NX2_DEV_57710, &ep->hba->cnic_dev_type))
+ cnic_dev_10g = 1;
+ else
+ cnic_dev_10g = 0;
+
+ /* SQ page table */
+ memset(ep->qp.sq_pgtbl_virt, 0, ep->qp.sq_pgtbl_size);
+ num_pages = ep->qp.sq_mem_size / PAGE_SIZE;
+ page = ep->qp.sq_phys;
+
+ if (cnic_dev_10g)
+ ptbl = (u32 *)((u8 *)ep->qp.sq_pgtbl_virt + ISCSI_SQ_DB_SIZE);
+ else
+ ptbl = (u32 *) ep->qp.sq_pgtbl_virt;
+ while (num_pages--) {
+ if (cnic_dev_10g) {
+ /* PTE is written in little endian format for 57710 */
+ *ptbl = (u32) page;
+ ptbl++;
+ *ptbl = (u32) ((u64) page >> 32);
+ ptbl++;
+ page += PAGE_SIZE;
+ } else {
+ /* PTE is written in big endian format for
+ * 5706/5708/5709 devices */
+ *ptbl = (u32) ((u64) page >> 32);
+ ptbl++;
+ *ptbl = (u32) page;
+ ptbl++;
+ page += PAGE_SIZE;
+ }
+ }
+
+ /* RQ page table */
+ memset(ep->qp.rq_pgtbl_virt, 0, ep->qp.rq_pgtbl_size);
+ num_pages = ep->qp.rq_mem_size / PAGE_SIZE;
+ page = ep->qp.rq_phys;
+
+ if (cnic_dev_10g)
+ ptbl = (u32 *)((u8 *)ep->qp.rq_pgtbl_virt + ISCSI_RQ_DB_SIZE);
+ else
+ ptbl = (u32 *) ep->qp.rq_pgtbl_virt;
+ while (num_pages--) {
+ if (cnic_dev_10g) {
+ /* PTE is written in little endian format for 57710 */
+ *ptbl = (u32) page;
+ ptbl++;
+ *ptbl = (u32) ((u64) page >> 32);
+ ptbl++;
+ page += PAGE_SIZE;
+ } else {
+ /* PTE is written in big endian format for
+ * 5706/5708/5709 devices */
+ *ptbl = (u32) ((u64) page >> 32);
+ ptbl++;
+ *ptbl = (u32) page;
+ ptbl++;
+ page += PAGE_SIZE;
+ }
+ }
+
+ /* CQ page table */
+ memset(ep->qp.cq_pgtbl_virt, 0, ep->qp.cq_pgtbl_size);
+ num_pages = ep->qp.cq_mem_size / PAGE_SIZE;
+ page = ep->qp.cq_phys;
+
+ if (cnic_dev_10g)
+ ptbl = (u32 *)((u8 *)ep->qp.cq_pgtbl_virt + ISCSI_CQ_DB_SIZE);
+ else
+ ptbl = (u32 *) ep->qp.cq_pgtbl_virt;
+ while (num_pages--) {
+ if (cnic_dev_10g) {
+ /* PTE is written in little endian format for 57710 */
+ *ptbl = (u32) page;
+ ptbl++;
+ *ptbl = (u32) ((u64) page >> 32);
+ ptbl++;
+ page += PAGE_SIZE;
+ } else {
+ /* PTE is written in big endian format for
+ * 5706/5708/5709 devices */
+ *ptbl = (u32) ((u64) page >> 32);
+ ptbl++;
+ *ptbl = (u32) page;
+ ptbl++;
+ page += PAGE_SIZE;
+ }
+ }
+}
+
+
+/**
+ * bnx2i_alloc_qp_resc - allocates required resources for QP.
+ * @hba: adapter structure pointer
+ * @ep: endpoint (transport indentifier) structure
+ *
+ * Allocate QP (transport layer for iSCSI connection) resources, DMA'able
+ * memory for SQ/RQ/CQ and page tables. EP structure elements such
+ * as producer/consumer indexes/pointers, queue sizes and page table
+ * contents are setup
+ */
+int bnx2i_alloc_qp_resc(struct bnx2i_hba *hba, struct bnx2i_endpoint *ep)
+{
+ struct bnx2i_5771x_cq_db *cq_db;
+
+ ep->hba = hba;
+ ep->conn = NULL;
+ ep->ep_cid = ep->ep_iscsi_cid = ep->ep_pg_cid = 0;
+
+ /* Allocate page table memory for SQ which is page aligned */
+ ep->qp.sq_mem_size = hba->max_sqes * BNX2I_SQ_WQE_SIZE;
+ ep->qp.sq_mem_size =
+ (ep->qp.sq_mem_size + (PAGE_SIZE - 1)) & PAGE_MASK;
+ ep->qp.sq_pgtbl_size =
+ (ep->qp.sq_mem_size / PAGE_SIZE) * sizeof(void *);
+ ep->qp.sq_pgtbl_size =
+ (ep->qp.sq_pgtbl_size + (PAGE_SIZE - 1)) & PAGE_MASK;
+
+ ep->qp.sq_pgtbl_virt =
+ dma_alloc_coherent(&hba->pcidev->dev, ep->qp.sq_pgtbl_size,
+ &ep->qp.sq_pgtbl_phys, GFP_KERNEL);
+ if (!ep->qp.sq_pgtbl_virt) {
+ printk(KERN_ALERT "bnx2i: unable to alloc SQ PT mem (%d)\n",
+ ep->qp.sq_pgtbl_size);
+ goto mem_alloc_err;
+ }
+
+ /* Allocate memory area for actual SQ element */
+ ep->qp.sq_virt =
+ dma_alloc_coherent(&hba->pcidev->dev, ep->qp.sq_mem_size,
+ &ep->qp.sq_phys, GFP_KERNEL);
+ if (!ep->qp.sq_virt) {
+ printk(KERN_ALERT "bnx2i: unable to alloc SQ BD memory %d\n",
+ ep->qp.sq_mem_size);
+ goto mem_alloc_err;
+ }
+
+ memset(ep->qp.sq_virt, 0x00, ep->qp.sq_mem_size);
+ ep->qp.sq_first_qe = ep->qp.sq_virt;
+ ep->qp.sq_prod_qe = ep->qp.sq_first_qe;
+ ep->qp.sq_cons_qe = ep->qp.sq_first_qe;
+ ep->qp.sq_last_qe = &ep->qp.sq_first_qe[hba->max_sqes - 1];
+ ep->qp.sq_prod_idx = 0;
+ ep->qp.sq_cons_idx = 0;
+ ep->qp.sqe_left = hba->max_sqes;
+
+ /* Allocate page table memory for CQ which is page aligned */
+ ep->qp.cq_mem_size = hba->max_cqes * BNX2I_CQE_SIZE;
+ ep->qp.cq_mem_size =
+ (ep->qp.cq_mem_size + (PAGE_SIZE - 1)) & PAGE_MASK;
+ ep->qp.cq_pgtbl_size =
+ (ep->qp.cq_mem_size / PAGE_SIZE) * sizeof(void *);
+ ep->qp.cq_pgtbl_size =
+ (ep->qp.cq_pgtbl_size + (PAGE_SIZE - 1)) & PAGE_MASK;
+
+ ep->qp.cq_pgtbl_virt =
+ dma_alloc_coherent(&hba->pcidev->dev, ep->qp.cq_pgtbl_size,
+ &ep->qp.cq_pgtbl_phys, GFP_KERNEL);
+ if (!ep->qp.cq_pgtbl_virt) {
+ printk(KERN_ALERT "bnx2i: unable to alloc CQ PT memory %d\n",
+ ep->qp.cq_pgtbl_size);
+ goto mem_alloc_err;
+ }
+
+ /* Allocate memory area for actual CQ element */
+ ep->qp.cq_virt =
+ dma_alloc_coherent(&hba->pcidev->dev, ep->qp.cq_mem_size,
+ &ep->qp.cq_phys, GFP_KERNEL);
+ if (!ep->qp.cq_virt) {
+ printk(KERN_ALERT "bnx2i: unable to alloc CQ BD memory %d\n",
+ ep->qp.cq_mem_size);
+ goto mem_alloc_err;
+ }
+ memset(ep->qp.cq_virt, 0x00, ep->qp.cq_mem_size);
+
+ ep->qp.cq_first_qe = ep->qp.cq_virt;
+ ep->qp.cq_prod_qe = ep->qp.cq_first_qe;
+ ep->qp.cq_cons_qe = ep->qp.cq_first_qe;
+ ep->qp.cq_last_qe = &ep->qp.cq_first_qe[hba->max_cqes - 1];
+ ep->qp.cq_prod_idx = 0;
+ ep->qp.cq_cons_idx = 0;
+ ep->qp.cqe_left = hba->max_cqes;
+ ep->qp.cqe_exp_seq_sn = ISCSI_INITIAL_SN;
+ ep->qp.cqe_size = hba->max_cqes;
+
+ /* Invalidate all EQ CQE index, req only for 57710 */
+ cq_db = (struct bnx2i_5771x_cq_db *) ep->qp.cq_pgtbl_virt;
+ memset(cq_db->sqn, 0xFF, sizeof(cq_db->sqn[0]) * BNX2X_MAX_CQS);
+
+ /* Allocate page table memory for RQ which is page aligned */
+ ep->qp.rq_mem_size = hba->max_rqes * BNX2I_RQ_WQE_SIZE;
+ ep->qp.rq_mem_size =
+ (ep->qp.rq_mem_size + (PAGE_SIZE - 1)) & PAGE_MASK;
+ ep->qp.rq_pgtbl_size =
+ (ep->qp.rq_mem_size / PAGE_SIZE) * sizeof(void *);
+ ep->qp.rq_pgtbl_size =
+ (ep->qp.rq_pgtbl_size + (PAGE_SIZE - 1)) & PAGE_MASK;
+
+ ep->qp.rq_pgtbl_virt =
+ dma_alloc_coherent(&hba->pcidev->dev, ep->qp.rq_pgtbl_size,
+ &ep->qp.rq_pgtbl_phys, GFP_KERNEL);
+ if (!ep->qp.rq_pgtbl_virt) {
+ printk(KERN_ALERT "bnx2i: unable to alloc RQ PT mem %d\n",
+ ep->qp.rq_pgtbl_size);
+ goto mem_alloc_err;
+ }
+
+ /* Allocate memory area for actual RQ element */
+ ep->qp.rq_virt =
+ dma_alloc_coherent(&hba->pcidev->dev, ep->qp.rq_mem_size,
+ &ep->qp.rq_phys, GFP_KERNEL);
+ if (!ep->qp.rq_virt) {
+ printk(KERN_ALERT "bnx2i: unable to alloc RQ BD memory %d\n",
+ ep->qp.rq_mem_size);
+ goto mem_alloc_err;
+ }
+
+ ep->qp.rq_first_qe = ep->qp.rq_virt;
+ ep->qp.rq_prod_qe = ep->qp.rq_first_qe;
+ ep->qp.rq_cons_qe = ep->qp.rq_first_qe;
+ ep->qp.rq_last_qe = &ep->qp.rq_first_qe[hba->max_rqes - 1];
+ ep->qp.rq_prod_idx = 0x8000;
+ ep->qp.rq_cons_idx = 0;
+ ep->qp.rqe_left = hba->max_rqes;
+
+ setup_qp_page_tables(ep);
+
+ return 0;
+
+mem_alloc_err:
+ bnx2i_free_qp_resc(hba, ep);
+ return -ENOMEM;
+}
+
+
+
+/**
+ * bnx2i_free_qp_resc - free memory resources held by QP
+ * @hba: adapter structure pointer
+ * @ep: endpoint (transport indentifier) structure
+ *
+ * Free QP resources - SQ/RQ/CQ memory and page tables.
+ */
+void bnx2i_free_qp_resc(struct bnx2i_hba *hba, struct bnx2i_endpoint *ep)
+{
+ if (ep->qp.ctx_base) {
+ iounmap(ep->qp.ctx_base);
+ ep->qp.ctx_base = NULL;
+ }
+ /* Free SQ mem */
+ if (ep->qp.sq_pgtbl_virt) {
+ dma_free_coherent(&hba->pcidev->dev, ep->qp.sq_pgtbl_size,
+ ep->qp.sq_pgtbl_virt, ep->qp.sq_pgtbl_phys);
+ ep->qp.sq_pgtbl_virt = NULL;
+ ep->qp.sq_pgtbl_phys = 0;
+ }
+ if (ep->qp.sq_virt) {
+ dma_free_coherent(&hba->pcidev->dev, ep->qp.sq_mem_size,
+ ep->qp.sq_virt, ep->qp.sq_phys);
+ ep->qp.sq_virt = NULL;
+ ep->qp.sq_phys = 0;
+ }
+
+ /* Free RQ mem */
+ if (ep->qp.rq_pgtbl_virt) {
+ dma_free_coherent(&hba->pcidev->dev, ep->qp.rq_pgtbl_size,
+ ep->qp.rq_pgtbl_virt, ep->qp.rq_pgtbl_phys);
+ ep->qp.rq_pgtbl_virt = NULL;
+ ep->qp.rq_pgtbl_phys = 0;
+ }
+ if (ep->qp.rq_virt) {
+ dma_free_coherent(&hba->pcidev->dev, ep->qp.rq_mem_size,
+ ep->qp.rq_virt, ep->qp.rq_phys);
+ ep->qp.rq_virt = NULL;
+ ep->qp.rq_phys = 0;
+ }
+
+ /* Free CQ mem */
+ if (ep->qp.cq_pgtbl_virt) {
+ dma_free_coherent(&hba->pcidev->dev, ep->qp.cq_pgtbl_size,
+ ep->qp.cq_pgtbl_virt, ep->qp.cq_pgtbl_phys);
+ ep->qp.cq_pgtbl_virt = NULL;
+ ep->qp.cq_pgtbl_phys = 0;
+ }
+ if (ep->qp.cq_virt) {
+ dma_free_coherent(&hba->pcidev->dev, ep->qp.cq_mem_size,
+ ep->qp.cq_virt, ep->qp.cq_phys);
+ ep->qp.cq_virt = NULL;
+ ep->qp.cq_phys = 0;
+ }
+}
+
+
+/**
+ * bnx2i_send_fw_iscsi_init_msg - initiates initial handshake with iscsi f/w
+ * @hba: adapter structure pointer
+ *
+ * Send down iscsi_init KWQEs which initiates the initial handshake with the f/w
+ * This results in iSCSi support validation and on-chip context manager
+ * initialization. Firmware completes this handshake with a CQE carrying
+ * the result of iscsi support validation. Parameter carried by
+ * iscsi init request determines the number of offloaded connection and
+ * tolerance level for iscsi protocol violation this hba/chip can support
+ */
+int bnx2i_send_fw_iscsi_init_msg(struct bnx2i_hba *hba)
+{
+ struct kwqe *kwqe_arr[3];
+ struct iscsi_kwqe_init1 iscsi_init;
+ struct iscsi_kwqe_init2 iscsi_init2;
+ int rc = 0;
+ u64 mask64;
+
+ bnx2i_adjust_qp_size(hba);
+
+ iscsi_init.flags =
+ ISCSI_PAGE_SIZE_4K << ISCSI_KWQE_INIT1_PAGE_SIZE_SHIFT;
+ if (en_tcp_dack)
+ iscsi_init.flags |= ISCSI_KWQE_INIT1_DELAYED_ACK_ENABLE;
+ iscsi_init.reserved0 = 0;
+ iscsi_init.num_cqs = 1;
+ iscsi_init.hdr.op_code = ISCSI_KWQE_OPCODE_INIT1;
+ iscsi_init.hdr.flags =
+ (ISCSI_KWQE_LAYER_CODE << ISCSI_KWQE_HEADER_LAYER_CODE_SHIFT);
+
+ iscsi_init.dummy_buffer_addr_lo = (u32) hba->dummy_buf_dma;
+ iscsi_init.dummy_buffer_addr_hi =
+ (u32) ((u64) hba->dummy_buf_dma >> 32);
+
+ hba->ctx_ccell_tasks =
+ ((hba->num_ccell & 0xFFFF) | (hba->max_sqes << 16));
+ iscsi_init.num_ccells_per_conn = hba->num_ccell;
+ iscsi_init.num_tasks_per_conn = hba->max_sqes;
+ iscsi_init.sq_wqes_per_page = PAGE_SIZE / BNX2I_SQ_WQE_SIZE;
+ iscsi_init.sq_num_wqes = hba->max_sqes;
+ iscsi_init.cq_log_wqes_per_page =
+ (u8) bnx2i_power_of2(PAGE_SIZE / BNX2I_CQE_SIZE);
+ iscsi_init.cq_num_wqes = hba->max_cqes;
+ iscsi_init.cq_num_pages = (hba->max_cqes * BNX2I_CQE_SIZE +
+ (PAGE_SIZE - 1)) / PAGE_SIZE;
+ iscsi_init.sq_num_pages = (hba->max_sqes * BNX2I_SQ_WQE_SIZE +
+ (PAGE_SIZE - 1)) / PAGE_SIZE;
+ iscsi_init.rq_buffer_size = BNX2I_RQ_WQE_SIZE;
+ iscsi_init.rq_num_wqes = hba->max_rqes;
+
+
+ iscsi_init2.hdr.op_code = ISCSI_KWQE_OPCODE_INIT2;
+ iscsi_init2.hdr.flags =
+ (ISCSI_KWQE_LAYER_CODE << ISCSI_KWQE_HEADER_LAYER_CODE_SHIFT);
+ iscsi_init2.max_cq_sqn = hba->max_cqes * 2 + 1;
+ mask64 = 0x0ULL;
+ mask64 |= (
+ /* CISCO MDS */
+ (1UL <<
+ ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_TTT_NOT_RSRV) |
+ /* HP MSA1510i */
+ (1UL <<
+ ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_EXP_DATASN) |
+ /* EMC */
+ (1ULL << ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_LUN));
+ if (error_mask1)
+ iscsi_init2.error_bit_map[0] = error_mask1;
+ else
+ iscsi_init2.error_bit_map[0] = (u32) mask64;
+
+ if (error_mask2)
+ iscsi_init2.error_bit_map[1] = error_mask2;
+ else
+ iscsi_init2.error_bit_map[1] = (u32) (mask64 >> 32);
+
+ iscsi_error_mask = mask64;
+
+ kwqe_arr[0] = (struct kwqe *) &iscsi_init;
+ kwqe_arr[1] = (struct kwqe *) &iscsi_init2;
+
+ if (hba->cnic && hba->cnic->submit_kwqes)
+ rc = hba->cnic->submit_kwqes(hba->cnic, kwqe_arr, 2);
+ return rc;
+}
+
+
+/**
+ * bnx2i_process_scsi_cmd_resp - this function handles scsi cmd completion.
+ * @conn: iscsi connection
+ * @cqe: pointer to newly DMA'ed CQE entry for processing
+ *
+ * process SCSI CMD Response CQE & complete the request to SCSI-ML
+ */
+static int bnx2i_process_scsi_cmd_resp(struct iscsi_session *session,
+ struct bnx2i_conn *bnx2i_conn,
+ struct cqe *cqe)
+{
+ struct iscsi_conn *conn = bnx2i_conn->cls_conn->dd_data;
+ struct bnx2i_cmd_response *resp_cqe;
+ struct bnx2i_cmd *bnx2i_cmd;
+ struct iscsi_task *task;
+ struct iscsi_cmd_rsp *hdr;
+ u32 datalen = 0;
+
+ resp_cqe = (struct bnx2i_cmd_response *)cqe;
+ spin_lock(&session->lock);
+ task = iscsi_itt_to_task(conn,
+ resp_cqe->itt & ISCSI_CMD_RESPONSE_INDEX);
+ if (!task)
+ goto fail;
+
+ bnx2i_cmd = task->dd_data;
+
+ if (bnx2i_cmd->req.op_attr & ISCSI_CMD_REQUEST_READ) {
+ conn->datain_pdus_cnt +=
+ resp_cqe->task_stat.read_stat.num_data_outs;
+ conn->rxdata_octets +=
+ bnx2i_cmd->req.total_data_transfer_length;
+ } else {
+ conn->dataout_pdus_cnt +=
+ resp_cqe->task_stat.read_stat.num_data_outs;
+ conn->r2t_pdus_cnt +=
+ resp_cqe->task_stat.read_stat.num_r2ts;
+ conn->txdata_octets +=
+ bnx2i_cmd->req.total_data_transfer_length;
+ }
+ bnx2i_iscsi_unmap_sg_list(bnx2i_cmd);
+
+ hdr = (struct iscsi_cmd_rsp *)task->hdr;
+ resp_cqe = (struct bnx2i_cmd_response *)cqe;
+ hdr->opcode = resp_cqe->op_code;
+ hdr->max_cmdsn = cpu_to_be32(resp_cqe->max_cmd_sn);
+ hdr->exp_cmdsn = cpu_to_be32(resp_cqe->exp_cmd_sn);
+ hdr->response = resp_cqe->response;
+ hdr->cmd_status = resp_cqe->status;
+ hdr->flags = resp_cqe->response_flags;
+ hdr->residual_count = cpu_to_be32(resp_cqe->residual_count);
+
+ if (resp_cqe->op_code == ISCSI_OP_SCSI_DATA_IN)
+ goto done;
+
+ if (resp_cqe->status == SAM_STAT_CHECK_CONDITION) {
+ datalen = resp_cqe->data_length;
+ if (datalen < 2)
+ goto done;
+
+ if (datalen > BNX2I_RQ_WQE_SIZE) {
+ iscsi_conn_printk(KERN_ERR, conn,
+ "sense data len %d > RQ sz\n",
+ datalen);
+ datalen = BNX2I_RQ_WQE_SIZE;
+ } else if (datalen > ISCSI_DEF_MAX_RECV_SEG_LEN) {
+ iscsi_conn_printk(KERN_ERR, conn,
+ "sense data len %d > conn data\n",
+ datalen);
+ datalen = ISCSI_DEF_MAX_RECV_SEG_LEN;
+ }
+
+ bnx2i_get_rq_buf(bnx2i_cmd->conn, conn->data, datalen);
+ bnx2i_put_rq_buf(bnx2i_cmd->conn, 1);
+ }
+
+done:
+ __iscsi_complete_pdu(conn, (struct iscsi_hdr *)hdr,
+ conn->data, datalen);
+fail:
+ spin_unlock(&session->lock);
+ return 0;
+}
+
+
+/**
+ * bnx2i_process_login_resp - this function handles iscsi login response
+ * @session: iscsi session pointer
+ * @bnx2i_conn: iscsi connection pointer
+ * @cqe: pointer to newly DMA'ed CQE entry for processing
+ *
+ * process Login Response CQE & complete it to open-iscsi user daemon
+ */
+static int bnx2i_process_login_resp(struct iscsi_session *session,
+ struct bnx2i_conn *bnx2i_conn,
+ struct cqe *cqe)
+{
+ struct iscsi_conn *conn = bnx2i_conn->cls_conn->dd_data;
+ struct iscsi_task *task;
+ struct bnx2i_login_response *login;
+ struct iscsi_login_rsp *resp_hdr;
+ int pld_len;
+ int pad_len;
+
+ login = (struct bnx2i_login_response *) cqe;
+ spin_lock(&session->lock);
+ task = iscsi_itt_to_task(conn,
+ login->itt & ISCSI_LOGIN_RESPONSE_INDEX);
+ if (!task)
+ goto done;
+
+ resp_hdr = (struct iscsi_login_rsp *) &bnx2i_conn->gen_pdu.resp_hdr;
+ memset(resp_hdr, 0, sizeof(struct iscsi_hdr));
+ resp_hdr->opcode = login->op_code;
+ resp_hdr->flags = login->response_flags;
+ resp_hdr->max_version = login->version_max;
+ resp_hdr->active_version = login->version_active;;
+ resp_hdr->hlength = 0;
+
+ hton24(resp_hdr->dlength, login->data_length);
+ memcpy(resp_hdr->isid, &login->isid_lo, 6);
+ resp_hdr->tsih = cpu_to_be16(login->tsih);
+ resp_hdr->itt = task->hdr->itt;
+ resp_hdr->statsn = cpu_to_be32(login->stat_sn);
+ resp_hdr->exp_cmdsn = cpu_to_be32(login->exp_cmd_sn);
+ resp_hdr->max_cmdsn = cpu_to_be32(login->max_cmd_sn);
+ resp_hdr->status_class = login->status_class;
+ resp_hdr->status_detail = login->status_detail;
+ pld_len = login->data_length;
+ bnx2i_conn->gen_pdu.resp_wr_ptr =
+ bnx2i_conn->gen_pdu.resp_buf + pld_len;
+
+ pad_len = 0;
+ if (pld_len & 0x3)
+ pad_len = 4 - (pld_len % 4);
+
+ if (pad_len) {
+ int i = 0;
+ for (i = 0; i < pad_len; i++) {
+ bnx2i_conn->gen_pdu.resp_wr_ptr[0] = 0;
+ bnx2i_conn->gen_pdu.resp_wr_ptr++;
+ }
+ }
+
+ __iscsi_complete_pdu(conn, (struct iscsi_hdr *)resp_hdr,
+ bnx2i_conn->gen_pdu.resp_buf,
+ bnx2i_conn->gen_pdu.resp_wr_ptr - bnx2i_conn->gen_pdu.resp_buf);
+done:
+ spin_unlock(&session->lock);
+ return 0;
+}
+
+/**
+ * bnx2i_process_tmf_resp - this function handles iscsi TMF response
+ * @session: iscsi session pointer
+ * @bnx2i_conn: iscsi connection pointer
+ * @cqe: pointer to newly DMA'ed CQE entry for processing
+ *
+ * process iSCSI TMF Response CQE and wake up the driver eh thread.
+ */
+static int bnx2i_process_tmf_resp(struct iscsi_session *session,
+ struct bnx2i_conn *bnx2i_conn,
+ struct cqe *cqe)
+{
+ struct iscsi_conn *conn = bnx2i_conn->cls_conn->dd_data;
+ struct iscsi_task *task;
+ struct bnx2i_tmf_response *tmf_cqe;
+ struct iscsi_tm_rsp *resp_hdr;
+
+ tmf_cqe = (struct bnx2i_tmf_response *)cqe;
+ spin_lock(&session->lock);
+ task = iscsi_itt_to_task(conn,
+ tmf_cqe->itt & ISCSI_TMF_RESPONSE_INDEX);
+ if (!task)
+ goto done;
+
+ resp_hdr = (struct iscsi_tm_rsp *) &bnx2i_conn->gen_pdu.resp_hdr;
+ memset(resp_hdr, 0, sizeof(struct iscsi_hdr));
+ resp_hdr->opcode = tmf_cqe->op_code;
+ resp_hdr->max_cmdsn = cpu_to_be32(tmf_cqe->max_cmd_sn);
+ resp_hdr->exp_cmdsn = cpu_to_be32(tmf_cqe->exp_cmd_sn);
+ resp_hdr->itt = task->hdr->itt;
+ resp_hdr->response = tmf_cqe->response;
+
+ __iscsi_complete_pdu(conn, (struct iscsi_hdr *)resp_hdr, NULL, 0);
+done:
+ spin_unlock(&session->lock);
+ return 0;
+}
+
+/**
+ * bnx2i_process_logout_resp - this function handles iscsi logout response
+ * @session: iscsi session pointer
+ * @bnx2i_conn: iscsi connection pointer
+ * @cqe: pointer to newly DMA'ed CQE entry for processing
+ *
+ * process iSCSI Logout Response CQE & make function call to
+ * notify the user daemon.
+ */
+static int bnx2i_process_logout_resp(struct iscsi_session *session,
+ struct bnx2i_conn *bnx2i_conn,
+ struct cqe *cqe)
+{
+ struct iscsi_conn *conn = bnx2i_conn->cls_conn->dd_data;
+ struct iscsi_task *task;
+ struct bnx2i_logout_response *logout;
+ struct iscsi_logout_rsp *resp_hdr;
+
+ logout = (struct bnx2i_logout_response *) cqe;
+ spin_lock(&session->lock);
+ task = iscsi_itt_to_task(conn,
+ logout->itt & ISCSI_LOGOUT_RESPONSE_INDEX);
+ if (!task)
+ goto done;
+
+ resp_hdr = (struct iscsi_logout_rsp *) &bnx2i_conn->gen_pdu.resp_hdr;
+ memset(resp_hdr, 0, sizeof(struct iscsi_hdr));
+ resp_hdr->opcode = logout->op_code;
+ resp_hdr->flags = logout->response;
+ resp_hdr->hlength = 0;
+
+ resp_hdr->itt = task->hdr->itt;
+ resp_hdr->statsn = task->hdr->exp_statsn;
+ resp_hdr->exp_cmdsn = cpu_to_be32(logout->exp_cmd_sn);
+ resp_hdr->max_cmdsn = cpu_to_be32(logout->max_cmd_sn);
+
+ resp_hdr->t2wait = cpu_to_be32(logout->time_to_wait);
+ resp_hdr->t2retain = cpu_to_be32(logout->time_to_retain);
+
+ __iscsi_complete_pdu(conn, (struct iscsi_hdr *)resp_hdr, NULL, 0);
+done:
+ spin_unlock(&session->lock);
+ return 0;
+}
+
+/**
+ * bnx2i_process_nopin_local_cmpl - this function handles iscsi nopin CQE
+ * @session: iscsi session pointer
+ * @bnx2i_conn: iscsi connection pointer
+ * @cqe: pointer to newly DMA'ed CQE entry for processing
+ *
+ * process iSCSI NOPIN local completion CQE, frees IIT and command structures
+ */
+static void bnx2i_process_nopin_local_cmpl(struct iscsi_session *session,
+ struct bnx2i_conn *bnx2i_conn,
+ struct cqe *cqe)
+{
+ struct iscsi_conn *conn = bnx2i_conn->cls_conn->dd_data;
+ struct bnx2i_nop_in_msg *nop_in;
+ struct iscsi_task *task;
+
+ nop_in = (struct bnx2i_nop_in_msg *)cqe;
+ spin_lock(&session->lock);
+ task = iscsi_itt_to_task(conn,
+ nop_in->itt & ISCSI_NOP_IN_MSG_INDEX);
+ if (task)
+ iscsi_put_task(task);
+ spin_unlock(&session->lock);
+}
+
+/**
+ * bnx2i_unsol_pdu_adjust_rq - makes adjustments to RQ after unsol pdu is recvd
+ * @conn: iscsi connection
+ *
+ * Firmware advances RQ producer index for every unsolicited PDU even if
+ * payload data length is '0'. This function makes corresponding
+ * adjustments on the driver side to match this f/w behavior
+ */
+static void bnx2i_unsol_pdu_adjust_rq(struct bnx2i_conn *bnx2i_conn)
+{
+ char dummy_rq_data[2];
+ bnx2i_get_rq_buf(bnx2i_conn, dummy_rq_data, 1);
+ bnx2i_put_rq_buf(bnx2i_conn, 1);
+}
+
+
+/**
+ * bnx2i_process_nopin_mesg - this function handles iscsi nopin CQE
+ * @session: iscsi session pointer
+ * @bnx2i_conn: iscsi connection pointer
+ * @cqe: pointer to newly DMA'ed CQE entry for processing
+ *
+ * process iSCSI target's proactive iSCSI NOPIN request
+ */
+static int bnx2i_process_nopin_mesg(struct iscsi_session *session,
+ struct bnx2i_conn *bnx2i_conn,
+ struct cqe *cqe)
+{
+ struct iscsi_conn *conn = bnx2i_conn->cls_conn->dd_data;
+ struct iscsi_task *task;
+ struct bnx2i_nop_in_msg *nop_in;
+ struct iscsi_nopin *hdr;
+ u32 itt;
+ int tgt_async_nop = 0;
+
+ nop_in = (struct bnx2i_nop_in_msg *)cqe;
+ itt = nop_in->itt & ISCSI_NOP_IN_MSG_INDEX;
+
+ spin_lock(&session->lock);
+ hdr = (struct iscsi_nopin *)&bnx2i_conn->gen_pdu.resp_hdr;
+ memset(hdr, 0, sizeof(struct iscsi_hdr));
+ hdr->opcode = nop_in->op_code;
+ hdr->max_cmdsn = cpu_to_be32(nop_in->max_cmd_sn);
+ hdr->exp_cmdsn = cpu_to_be32(nop_in->exp_cmd_sn);
+ hdr->ttt = cpu_to_be32(nop_in->ttt);
+
+ if (itt == (u16) RESERVED_ITT) {
+ bnx2i_unsol_pdu_adjust_rq(bnx2i_conn);
+ hdr->itt = RESERVED_ITT;
+ tgt_async_nop = 1;
+ goto done;
+ }
+
+ /* this is a response to one of our nop-outs */
+ task = iscsi_itt_to_task(conn, itt);
+ if (task) {
+ hdr->flags = ISCSI_FLAG_CMD_FINAL;
+ hdr->itt = task->hdr->itt;
+ hdr->ttt = cpu_to_be32(nop_in->ttt);
+ memcpy(hdr->lun, nop_in->lun, 8);
+ }
+done:
+ __iscsi_complete_pdu(conn, (struct iscsi_hdr *)hdr, NULL, 0);
+ spin_unlock(&session->lock);
+
+ return tgt_async_nop;
+}
+
+
+/**
+ * bnx2i_process_async_mesg - this function handles iscsi async message
+ * @session: iscsi session pointer
+ * @bnx2i_conn: iscsi connection pointer
+ * @cqe: pointer to newly DMA'ed CQE entry for processing
+ *
+ * process iSCSI ASYNC Message
+ */
+static void bnx2i_process_async_mesg(struct iscsi_session *session,
+ struct bnx2i_conn *bnx2i_conn,
+ struct cqe *cqe)
+{
+ struct bnx2i_async_msg *async_cqe;
+ struct iscsi_async *resp_hdr;
+ u8 async_event;
+
+ bnx2i_unsol_pdu_adjust_rq(bnx2i_conn);
+
+ async_cqe = (struct bnx2i_async_msg *)cqe;
+ async_event = async_cqe->async_event;
+
+ if (async_event == ISCSI_ASYNC_MSG_SCSI_EVENT) {
+ iscsi_conn_printk(KERN_ALERT, bnx2i_conn->cls_conn->dd_data,
+ "async: scsi events not supported\n");
+ return;
+ }
+
+ spin_lock(&session->lock);
+ resp_hdr = (struct iscsi_async *) &bnx2i_conn->gen_pdu.resp_hdr;
+ memset(resp_hdr, 0, sizeof(struct iscsi_hdr));
+ resp_hdr->opcode = async_cqe->op_code;
+ resp_hdr->flags = 0x80;
+
+ memcpy(resp_hdr->lun, async_cqe->lun, 8);
+ resp_hdr->exp_cmdsn = cpu_to_be32(async_cqe->exp_cmd_sn);
+ resp_hdr->max_cmdsn = cpu_to_be32(async_cqe->max_cmd_sn);
+
+ resp_hdr->async_event = async_cqe->async_event;
+ resp_hdr->async_vcode = async_cqe->async_vcode;
+
+ resp_hdr->param1 = cpu_to_be16(async_cqe->param1);
+ resp_hdr->param2 = cpu_to_be16(async_cqe->param2);
+ resp_hdr->param3 = cpu_to_be16(async_cqe->param3);
+
+ __iscsi_complete_pdu(bnx2i_conn->cls_conn->dd_data,
+ (struct iscsi_hdr *)resp_hdr, NULL, 0);
+ spin_unlock(&session->lock);
+}
+
+
+/**
+ * bnx2i_process_reject_mesg - process iscsi reject pdu
+ * @session: iscsi session pointer
+ * @bnx2i_conn: iscsi connection pointer
+ * @cqe: pointer to newly DMA'ed CQE entry for processing
+ *
+ * process iSCSI REJECT message
+ */
+static void bnx2i_process_reject_mesg(struct iscsi_session *session,
+ struct bnx2i_conn *bnx2i_conn,
+ struct cqe *cqe)
+{
+ struct iscsi_conn *conn = bnx2i_conn->cls_conn->dd_data;
+ struct bnx2i_reject_msg *reject;
+ struct iscsi_reject *hdr;
+
+ reject = (struct bnx2i_reject_msg *) cqe;
+ if (reject->data_length) {
+ bnx2i_get_rq_buf(bnx2i_conn, conn->data, reject->data_length);
+ bnx2i_put_rq_buf(bnx2i_conn, 1);
+ } else
+ bnx2i_unsol_pdu_adjust_rq(bnx2i_conn);
+
+ spin_lock(&session->lock);
+ hdr = (struct iscsi_reject *) &bnx2i_conn->gen_pdu.resp_hdr;
+ memset(hdr, 0, sizeof(struct iscsi_hdr));
+ hdr->opcode = reject->op_code;
+ hdr->reason = reject->reason;
+ hton24(hdr->dlength, reject->data_length);
+ hdr->max_cmdsn = cpu_to_be32(reject->max_cmd_sn);
+ hdr->exp_cmdsn = cpu_to_be32(reject->exp_cmd_sn);
+ hdr->ffffffff = cpu_to_be32(RESERVED_ITT);
+ __iscsi_complete_pdu(conn, (struct iscsi_hdr *)hdr, conn->data,
+ reject->data_length);
+ spin_unlock(&session->lock);
+}
+
+/**
+ * bnx2i_process_cmd_cleanup_resp - process scsi command clean-up completion
+ * @session: iscsi session pointer
+ * @bnx2i_conn: iscsi connection pointer
+ * @cqe: pointer to newly DMA'ed CQE entry for processing
+ *
+ * process command cleanup response CQE during conn shutdown or error recovery
+ */
+static void bnx2i_process_cmd_cleanup_resp(struct iscsi_session *session,
+ struct bnx2i_conn *bnx2i_conn,
+ struct cqe *cqe)
+{
+ struct bnx2i_cleanup_response *cmd_clean_rsp;
+ struct iscsi_conn *conn = bnx2i_conn->cls_conn->dd_data;
+ struct iscsi_task *task;
+
+ cmd_clean_rsp = (struct bnx2i_cleanup_response *)cqe;
+ spin_lock(&session->lock);
+ task = iscsi_itt_to_task(conn,
+ cmd_clean_rsp->itt & ISCSI_CLEANUP_RESPONSE_INDEX);
+ if (!task)
+ printk(KERN_ALERT "bnx2i: cmd clean ITT %x not active\n",
+ cmd_clean_rsp->itt & ISCSI_CLEANUP_RESPONSE_INDEX);
+ spin_unlock(&session->lock);
+ complete(&bnx2i_conn->cmd_cleanup_cmpl);
+}
+
+
+
+/**
+ * bnx2i_process_new_cqes - process newly DMA'ed CQE's
+ * @bnx2i_conn: iscsi connection
+ *
+ * this function is called by generic KCQ handler to process all pending CQE's
+ */
+static void bnx2i_process_new_cqes(struct bnx2i_conn *bnx2i_conn)
+{
+ struct iscsi_conn *conn = bnx2i_conn->cls_conn->dd_data;
+ struct iscsi_session *session = conn->session;
+ struct qp_info *qp = &bnx2i_conn->ep->qp;
+ struct bnx2i_nop_in_msg *nopin;
+ int tgt_async_msg;
+
+ while (1) {
+ nopin = (struct bnx2i_nop_in_msg *) qp->cq_cons_qe;
+ if (nopin->cq_req_sn != qp->cqe_exp_seq_sn)
+ break;
+
+ if (unlikely(test_bit(ISCSI_SUSPEND_BIT, &conn->suspend_rx)))
+ break;
+
+ tgt_async_msg = 0;
+
+ switch (nopin->op_code) {
+ case ISCSI_OP_SCSI_CMD_RSP:
+ case ISCSI_OP_SCSI_DATA_IN:
+ bnx2i_process_scsi_cmd_resp(session, bnx2i_conn,
+ qp->cq_cons_qe);
+ break;
+ case ISCSI_OP_LOGIN_RSP:
+ bnx2i_process_login_resp(session, bnx2i_conn,
+ qp->cq_cons_qe);
+ break;
+ case ISCSI_OP_SCSI_TMFUNC_RSP:
+ bnx2i_process_tmf_resp(session, bnx2i_conn,
+ qp->cq_cons_qe);
+ break;
+ case ISCSI_OP_LOGOUT_RSP:
+ bnx2i_process_logout_resp(session, bnx2i_conn,
+ qp->cq_cons_qe);
+ break;
+ case ISCSI_OP_NOOP_IN:
+ if (bnx2i_process_nopin_mesg(session, bnx2i_conn,
+ qp->cq_cons_qe))
+ tgt_async_msg = 1;
+ break;
+ case ISCSI_OPCODE_NOPOUT_LOCAL_COMPLETION:
+ bnx2i_process_nopin_local_cmpl(session, bnx2i_conn,
+ qp->cq_cons_qe);
+ break;
+ case ISCSI_OP_ASYNC_EVENT:
+ bnx2i_process_async_mesg(session, bnx2i_conn,
+ qp->cq_cons_qe);
+ tgt_async_msg = 1;
+ break;
+ case ISCSI_OP_REJECT:
+ bnx2i_process_reject_mesg(session, bnx2i_conn,
+ qp->cq_cons_qe);
+ break;
+ case ISCSI_OPCODE_CLEANUP_RESPONSE:
+ bnx2i_process_cmd_cleanup_resp(session, bnx2i_conn,
+ qp->cq_cons_qe);
+ break;
+ default:
+ printk(KERN_ALERT "bnx2i: unknown opcode 0x%x\n",
+ nopin->op_code);
+ }
+
+ if (!tgt_async_msg)
+ bnx2i_conn->ep->num_active_cmds--;
+
+ /* clear out in production version only, till beta keep opcode
+ * field intact, will be helpful in debugging (context dump)
+ * nopin->op_code = 0;
+ */
+ qp->cqe_exp_seq_sn++;
+ if (qp->cqe_exp_seq_sn == (qp->cqe_size * 2 + 1))
+ qp->cqe_exp_seq_sn = ISCSI_INITIAL_SN;
+
+ if (qp->cq_cons_qe == qp->cq_last_qe) {
+ qp->cq_cons_qe = qp->cq_first_qe;
+ qp->cq_cons_idx = 0;
+ } else {
+ qp->cq_cons_qe++;
+ qp->cq_cons_idx++;
+ }
+ }
+ bnx2i_arm_cq_event_coalescing(bnx2i_conn->ep, CNIC_ARM_CQE);
+}
+
+/**
+ * bnx2i_fastpath_notification - process global event queue (KCQ)
+ * @hba: adapter structure pointer
+ * @new_cqe_kcqe: pointer to newly DMA'ed KCQE entry
+ *
+ * Fast path event notification handler, KCQ entry carries context id
+ * of the connection that has 1 or more pending CQ entries
+ */
+static void bnx2i_fastpath_notification(struct bnx2i_hba *hba,
+ struct iscsi_kcqe *new_cqe_kcqe)
+{
+ struct bnx2i_conn *conn;
+ u32 iscsi_cid;
+
+ iscsi_cid = new_cqe_kcqe->iscsi_conn_id;
+ conn = bnx2i_get_conn_from_id(hba, iscsi_cid);
+
+ if (!conn) {
+ printk(KERN_ALERT "cid #%x not valid\n", iscsi_cid);
+ return;
+ }
+ if (!conn->ep) {
+ printk(KERN_ALERT "cid #%x - ep not bound\n", iscsi_cid);
+ return;
+ }
+
+ bnx2i_process_new_cqes(conn);
+}
+
+
+/**
+ * bnx2i_process_update_conn_cmpl - process iscsi conn update completion KCQE
+ * @hba: adapter structure pointer
+ * @update_kcqe: kcqe pointer
+ *
+ * CONN_UPDATE completion handler, this completes iSCSI connection FFP migration
+ */
+static void bnx2i_process_update_conn_cmpl(struct bnx2i_hba *hba,
+ struct iscsi_kcqe *update_kcqe)
+{
+ struct bnx2i_conn *conn;
+ u32 iscsi_cid;
+
+ iscsi_cid = update_kcqe->iscsi_conn_id;
+ conn = bnx2i_get_conn_from_id(hba, iscsi_cid);
+
+ if (!conn) {
+ printk(KERN_ALERT "conn_update: cid %x not valid\n", iscsi_cid);
+ return;
+ }
+ if (!conn->ep) {
+ printk(KERN_ALERT "cid %x does not have ep bound\n", iscsi_cid);
+ return;
+ }
+
+ if (update_kcqe->completion_status) {
+ printk(KERN_ALERT "request failed cid %x\n", iscsi_cid);
+ conn->ep->state = EP_STATE_ULP_UPDATE_FAILED;
+ } else
+ conn->ep->state = EP_STATE_ULP_UPDATE_COMPL;
+
+ wake_up_interruptible(&conn->ep->ofld_wait);
+}
+
+
+/**
+ * bnx2i_recovery_que_add_conn - add connection to recovery queue
+ * @hba: adapter structure pointer
+ * @bnx2i_conn: iscsi connection
+ *
+ * Add connection to recovery queue and schedule adapter eh worker
+ */
+static void bnx2i_recovery_que_add_conn(struct bnx2i_hba *hba,
+ struct bnx2i_conn *bnx2i_conn)
+{
+ iscsi_conn_failure(bnx2i_conn->cls_conn->dd_data,
+ ISCSI_ERR_CONN_FAILED);
+}
+
+
+/**
+ * bnx2i_process_tcp_error - process error notification on a given connection
+ *
+ * @hba: adapter structure pointer
+ * @tcp_err: tcp error kcqe pointer
+ *
+ * handles tcp level error notifications from FW.
+ */
+static void bnx2i_process_tcp_error(struct bnx2i_hba *hba,
+ struct iscsi_kcqe *tcp_err)
+{
+ struct bnx2i_conn *bnx2i_conn;
+ u32 iscsi_cid;
+
+ iscsi_cid = tcp_err->iscsi_conn_id;
+ bnx2i_conn = bnx2i_get_conn_from_id(hba, iscsi_cid);
+
+ if (!bnx2i_conn) {
+ printk(KERN_ALERT "bnx2i - cid 0x%x not valid\n", iscsi_cid);
+ return;
+ }
+
+ printk(KERN_ALERT "bnx2i - cid 0x%x had TCP errors, error code 0x%x\n",
+ iscsi_cid, tcp_err->completion_status);
+ bnx2i_recovery_que_add_conn(bnx2i_conn->hba, bnx2i_conn);
+}
+
+
+/**
+ * bnx2i_process_iscsi_error - process error notification on a given connection
+ * @hba: adapter structure pointer
+ * @iscsi_err: iscsi error kcqe pointer
+ *
+ * handles iscsi error notifications from the FW. Firmware based in initial
+ * handshake classifies iscsi protocol / TCP rfc violation into either
+ * warning or error indications. If indication is of "Error" type, driver
+ * will initiate session recovery for that connection/session. For
+ * "Warning" type indication, driver will put out a system log message
+ * (there will be only one message for each type for the life of the
+ * session, this is to avoid un-necessarily overloading the system)
+ */
+static void bnx2i_process_iscsi_error(struct bnx2i_hba *hba,
+ struct iscsi_kcqe *iscsi_err)
+{
+ struct bnx2i_conn *bnx2i_conn;
+ u32 iscsi_cid;
+ char warn_notice[] = "iscsi_warning";
+ char error_notice[] = "iscsi_error";
+ char additional_notice[64];
+ char *message;
+ int need_recovery;
+ u64 err_mask64;
+
+ iscsi_cid = iscsi_err->iscsi_conn_id;
+ bnx2i_conn = bnx2i_get_conn_from_id(hba, iscsi_cid);
+ if (!bnx2i_conn) {
+ printk(KERN_ALERT "bnx2i - cid 0x%x not valid\n", iscsi_cid);
+ return;
+ }
+
+ err_mask64 = (0x1ULL << iscsi_err->completion_status);
+
+ if (err_mask64 & iscsi_error_mask) {
+ need_recovery = 0;
+ message = warn_notice;
+ } else {
+ need_recovery = 1;
+ message = error_notice;
+ }
+
+ switch (iscsi_err->completion_status) {
+ case ISCSI_KCQE_COMPLETION_STATUS_HDR_DIG_ERR:
+ strcpy(additional_notice, "hdr digest err");
+ break;
+ case ISCSI_KCQE_COMPLETION_STATUS_DATA_DIG_ERR:
+ strcpy(additional_notice, "data digest err");
+ break;
+ case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_OPCODE:
+ strcpy(additional_notice, "wrong opcode rcvd");
+ break;
+ case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_AHS_LEN:
+ strcpy(additional_notice, "AHS len > 0 rcvd");
+ break;
+ case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_ITT:
+ strcpy(additional_notice, "invalid ITT rcvd");
+ break;
+ case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_STATSN:
+ strcpy(additional_notice, "wrong StatSN rcvd");
+ break;
+ case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_EXP_DATASN:
+ strcpy(additional_notice, "wrong DataSN rcvd");
+ break;
+ case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_PEND_R2T:
+ strcpy(additional_notice, "pend R2T violation");
+ break;
+ case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_0:
+ strcpy(additional_notice, "ERL0, UO");
+ break;
+ case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_1:
+ strcpy(additional_notice, "ERL0, U1");
+ break;
+ case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_2:
+ strcpy(additional_notice, "ERL0, U2");
+ break;
+ case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_3:
+ strcpy(additional_notice, "ERL0, U3");
+ break;
+ case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_4:
+ strcpy(additional_notice, "ERL0, U4");
+ break;
+ case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_5:
+ strcpy(additional_notice, "ERL0, U5");
+ break;
+ case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_6:
+ strcpy(additional_notice, "ERL0, U6");
+ break;
+ case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_REMAIN_RCV_LEN:
+ strcpy(additional_notice, "invalid resi len");
+ break;
+ case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_MAX_RCV_PDU_LEN:
+ strcpy(additional_notice, "MRDSL violation");
+ break;
+ case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_F_BIT_ZERO:
+ strcpy(additional_notice, "F-bit not set");
+ break;
+ case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_TTT_NOT_RSRV:
+ strcpy(additional_notice, "invalid TTT");
+ break;
+ case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_DATASN:
+ strcpy(additional_notice, "invalid DataSN");
+ break;
+ case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_REMAIN_BURST_LEN:
+ strcpy(additional_notice, "burst len violation");
+ break;
+ case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_BUFFER_OFF:
+ strcpy(additional_notice, "buf offset violation");
+ break;
+ case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_LUN:
+ strcpy(additional_notice, "invalid LUN field");
+ break;
+ case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_R2TSN:
+ strcpy(additional_notice, "invalid R2TSN field");
+ break;
+#define BNX2I_ERR_DESIRED_DATA_TRNS_LEN_0 \
+ ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_DESIRED_DATA_TRNS_LEN_0
+ case BNX2I_ERR_DESIRED_DATA_TRNS_LEN_0:
+ strcpy(additional_notice, "invalid cmd len1");
+ break;
+#define BNX2I_ERR_DESIRED_DATA_TRNS_LEN_1 \
+ ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_DESIRED_DATA_TRNS_LEN_1
+ case BNX2I_ERR_DESIRED_DATA_TRNS_LEN_1:
+ strcpy(additional_notice, "invalid cmd len2");
+ break;
+ case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_PEND_R2T_EXCEED:
+ strcpy(additional_notice,
+ "pend r2t exceeds MaxOutstandingR2T value");
+ break;
+ case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_TTT_IS_RSRV:
+ strcpy(additional_notice, "TTT is rsvd");
+ break;
+ case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_MAX_BURST_LEN:
+ strcpy(additional_notice, "MBL violation");
+ break;
+#define BNX2I_ERR_DATA_SEG_LEN_NOT_ZERO \
+ ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_DATA_SEG_LEN_NOT_ZERO
+ case BNX2I_ERR_DATA_SEG_LEN_NOT_ZERO:
+ strcpy(additional_notice, "data seg len != 0");
+ break;
+ case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_REJECT_PDU_LEN:
+ strcpy(additional_notice, "reject pdu len error");
+ break;
+ case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_ASYNC_PDU_LEN:
+ strcpy(additional_notice, "async pdu len error");
+ break;
+ case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_NOPIN_PDU_LEN:
+ strcpy(additional_notice, "nopin pdu len error");
+ break;
+#define BNX2_ERR_PEND_R2T_IN_CLEANUP \
+ ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_PEND_R2T_IN_CLEANUP
+ case BNX2_ERR_PEND_R2T_IN_CLEANUP:
+ strcpy(additional_notice, "pend r2t in cleanup");
+ break;
+
+ case ISCI_KCQE_COMPLETION_STATUS_TCP_ERROR_IP_FRAGMENT:
+ strcpy(additional_notice, "IP fragments rcvd");
+ break;
+ case ISCI_KCQE_COMPLETION_STATUS_TCP_ERROR_IP_OPTIONS:
+ strcpy(additional_notice, "IP options error");
+ break;
+ case ISCI_KCQE_COMPLETION_STATUS_TCP_ERROR_URGENT_FLAG:
+ strcpy(additional_notice, "urgent flag error");
+ break;
+ default:
+ printk(KERN_ALERT "iscsi_err - unknown err %x\n",
+ iscsi_err->completion_status);
+ }
+
+ if (need_recovery) {
+ iscsi_conn_printk(KERN_ALERT,
+ bnx2i_conn->cls_conn->dd_data,
+ "bnx2i: %s - %s\n",
+ message, additional_notice);
+
+ iscsi_conn_printk(KERN_ALERT,
+ bnx2i_conn->cls_conn->dd_data,
+ "conn_err - hostno %d conn %p, "
+ "iscsi_cid %x cid %x\n",
+ bnx2i_conn->hba->shost->host_no,
+ bnx2i_conn, bnx2i_conn->ep->ep_iscsi_cid,
+ bnx2i_conn->ep->ep_cid);
+ bnx2i_recovery_que_add_conn(bnx2i_conn->hba, bnx2i_conn);
+ } else
+ if (!test_and_set_bit(iscsi_err->completion_status,
+ (void *) &bnx2i_conn->violation_notified))
+ iscsi_conn_printk(KERN_ALERT,
+ bnx2i_conn->cls_conn->dd_data,
+ "bnx2i: %s - %s\n",
+ message, additional_notice);
+}
+
+
+/**
+ * bnx2i_process_conn_destroy_cmpl - process iscsi conn destroy completion
+ * @hba: adapter structure pointer
+ * @conn_destroy: conn destroy kcqe pointer
+ *
+ * handles connection destroy completion request.
+ */
+static void bnx2i_process_conn_destroy_cmpl(struct bnx2i_hba *hba,
+ struct iscsi_kcqe *conn_destroy)
+{
+ struct bnx2i_endpoint *ep;
+
+ ep = bnx2i_find_ep_in_destroy_list(hba, conn_destroy->iscsi_conn_id);
+ if (!ep) {
+ printk(KERN_ALERT "bnx2i_conn_destroy_cmpl: no pending "
+ "offload request, unexpected complection\n");
+ return;
+ }
+
+ if (hba != ep->hba) {
+ printk(KERN_ALERT "conn destroy- error hba mis-match\n");
+ return;
+ }
+
+ if (conn_destroy->completion_status) {
+ printk(KERN_ALERT "conn_destroy_cmpl: op failed\n");
+ ep->state = EP_STATE_CLEANUP_FAILED;
+ } else
+ ep->state = EP_STATE_CLEANUP_CMPL;
+ wake_up_interruptible(&ep->ofld_wait);
+}
+
+
+/**
+ * bnx2i_process_ofld_cmpl - process initial iscsi conn offload completion
+ * @hba: adapter structure pointer
+ * @ofld_kcqe: conn offload kcqe pointer
+ *
+ * handles initial connection offload completion, ep_connect() thread is
+ * woken-up to continue with LLP connect process
+ */
+static void bnx2i_process_ofld_cmpl(struct bnx2i_hba *hba,
+ struct iscsi_kcqe *ofld_kcqe)
+{
+ u32 cid_addr;
+ struct bnx2i_endpoint *ep;
+ u32 cid_num;
+
+ ep = bnx2i_find_ep_in_ofld_list(hba, ofld_kcqe->iscsi_conn_id);
+ if (!ep) {
+ printk(KERN_ALERT "ofld_cmpl: no pend offload request\n");
+ return;
+ }
+
+ if (hba != ep->hba) {
+ printk(KERN_ALERT "ofld_cmpl: error hba mis-match\n");
+ return;
+ }
+
+ if (ofld_kcqe->completion_status) {
+ if (ofld_kcqe->completion_status ==
+ ISCSI_KCQE_COMPLETION_STATUS_CTX_ALLOC_FAILURE)
+ printk(KERN_ALERT "bnx2i: unable to allocate"
+ " iSCSI context resources\n");
+ ep->state = EP_STATE_OFLD_FAILED;
+ } else {
+ ep->state = EP_STATE_OFLD_COMPL;
+ cid_addr = ofld_kcqe->iscsi_conn_context_id;
+ cid_num = bnx2i_get_cid_num(ep);
+ ep->ep_cid = cid_addr;
+ ep->qp.ctx_base = NULL;
+ }
+ wake_up_interruptible(&ep->ofld_wait);
+}
+
+/**
+ * bnx2i_indicate_kcqe - process iscsi conn update completion KCQE
+ * @hba: adapter structure pointer
+ * @update_kcqe: kcqe pointer
+ *
+ * Generic KCQ event handler/dispatcher
+ */
+static void bnx2i_indicate_kcqe(void *context, struct kcqe *kcqe[],
+ u32 num_cqe)
+{
+ struct bnx2i_hba *hba = context;
+ int i = 0;
+ struct iscsi_kcqe *ikcqe = NULL;
+
+ while (i < num_cqe) {
+ ikcqe = (struct iscsi_kcqe *) kcqe[i++];
+
+ if (ikcqe->op_code ==
+ ISCSI_KCQE_OPCODE_CQ_EVENT_NOTIFICATION)
+ bnx2i_fastpath_notification(hba, ikcqe);
+ else if (ikcqe->op_code == ISCSI_KCQE_OPCODE_OFFLOAD_CONN)
+ bnx2i_process_ofld_cmpl(hba, ikcqe);
+ else if (ikcqe->op_code == ISCSI_KCQE_OPCODE_UPDATE_CONN)
+ bnx2i_process_update_conn_cmpl(hba, ikcqe);
+ else if (ikcqe->op_code == ISCSI_KCQE_OPCODE_INIT) {
+ if (ikcqe->completion_status !=
+ ISCSI_KCQE_COMPLETION_STATUS_SUCCESS)
+ bnx2i_iscsi_license_error(hba, ikcqe->\
+ completion_status);
+ else {
+ set_bit(ADAPTER_STATE_UP, &hba->adapter_state);
+ bnx2i_get_link_state(hba);
+ printk(KERN_INFO "bnx2i [%.2x:%.2x.%.2x]: "
+ "ISCSI_INIT passed\n",
+ (u8)hba->pcidev->bus->number,
+ hba->pci_devno,
+ (u8)hba->pci_func);
+
+
+ }
+ } else if (ikcqe->op_code == ISCSI_KCQE_OPCODE_DESTROY_CONN)
+ bnx2i_process_conn_destroy_cmpl(hba, ikcqe);
+ else if (ikcqe->op_code == ISCSI_KCQE_OPCODE_ISCSI_ERROR)
+ bnx2i_process_iscsi_error(hba, ikcqe);
+ else if (ikcqe->op_code == ISCSI_KCQE_OPCODE_TCP_ERROR)
+ bnx2i_process_tcp_error(hba, ikcqe);
+ else
+ printk(KERN_ALERT "bnx2i: unknown opcode 0x%x\n",
+ ikcqe->op_code);
+ }
+}
+
+
+/**
+ * bnx2i_indicate_netevent - Generic netdev event handler
+ * @context: adapter structure pointer
+ * @event: event type
+ *
+ * Handles four netdev events, NETDEV_UP, NETDEV_DOWN,
+ * NETDEV_GOING_DOWN and NETDEV_CHANGE
+ */
+static void bnx2i_indicate_netevent(void *context, unsigned long event)
+{
+ struct bnx2i_hba *hba = context;
+
+ switch (event) {
+ case NETDEV_UP:
+ if (!test_bit(ADAPTER_STATE_UP, &hba->adapter_state))
+ bnx2i_send_fw_iscsi_init_msg(hba);
+ break;
+ case NETDEV_DOWN:
+ clear_bit(ADAPTER_STATE_GOING_DOWN, &hba->adapter_state);
+ clear_bit(ADAPTER_STATE_UP, &hba->adapter_state);
+ break;
+ case NETDEV_GOING_DOWN:
+ set_bit(ADAPTER_STATE_GOING_DOWN, &hba->adapter_state);
+ iscsi_host_for_each_session(hba->shost,
+ bnx2i_drop_session);
+ break;
+ case NETDEV_CHANGE:
+ bnx2i_get_link_state(hba);
+ break;
+ default:
+ ;
+ }
+}
+
+
+/**
+ * bnx2i_cm_connect_cmpl - process iscsi conn establishment completion
+ * @cm_sk: cnic sock structure pointer
+ *
+ * function callback exported via bnx2i - cnic driver interface to
+ * indicate completion of option-2 TCP connect request.
+ */
+static void bnx2i_cm_connect_cmpl(struct cnic_sock *cm_sk)
+{
+ struct bnx2i_endpoint *ep = (struct bnx2i_endpoint *) cm_sk->context;
+
+ if (test_bit(ADAPTER_STATE_GOING_DOWN, &ep->hba->adapter_state))
+ ep->state = EP_STATE_CONNECT_FAILED;
+ else if (test_bit(SK_F_OFFLD_COMPLETE, &cm_sk->flags))
+ ep->state = EP_STATE_CONNECT_COMPL;
+ else
+ ep->state = EP_STATE_CONNECT_FAILED;
+
+ wake_up_interruptible(&ep->ofld_wait);
+}
+
+
+/**
+ * bnx2i_cm_close_cmpl - process tcp conn close completion
+ * @cm_sk: cnic sock structure pointer
+ *
+ * function callback exported via bnx2i - cnic driver interface to
+ * indicate completion of option-2 graceful TCP connect shutdown
+ */
+static void bnx2i_cm_close_cmpl(struct cnic_sock *cm_sk)
+{
+ struct bnx2i_endpoint *ep = (struct bnx2i_endpoint *) cm_sk->context;
+
+ ep->state = EP_STATE_DISCONN_COMPL;
+ wake_up_interruptible(&ep->ofld_wait);
+}
+
+
+/**
+ * bnx2i_cm_abort_cmpl - process abortive tcp conn teardown completion
+ * @cm_sk: cnic sock structure pointer
+ *
+ * function callback exported via bnx2i - cnic driver interface to
+ * indicate completion of option-2 abortive TCP connect termination
+ */
+static void bnx2i_cm_abort_cmpl(struct cnic_sock *cm_sk)
+{
+ struct bnx2i_endpoint *ep = (struct bnx2i_endpoint *) cm_sk->context;
+
+ ep->state = EP_STATE_DISCONN_COMPL;
+ wake_up_interruptible(&ep->ofld_wait);
+}
+
+
+/**
+ * bnx2i_cm_remote_close - process received TCP FIN
+ * @hba: adapter structure pointer
+ * @update_kcqe: kcqe pointer
+ *
+ * function callback exported via bnx2i - cnic driver interface to indicate
+ * async TCP events such as FIN
+ */
+static void bnx2i_cm_remote_close(struct cnic_sock *cm_sk)
+{
+ struct bnx2i_endpoint *ep = (struct bnx2i_endpoint *) cm_sk->context;
+
+ ep->state = EP_STATE_TCP_FIN_RCVD;
+ if (ep->conn)
+ bnx2i_recovery_que_add_conn(ep->hba, ep->conn);
+}
+
+/**
+ * bnx2i_cm_remote_abort - process TCP RST and start conn cleanup
+ * @hba: adapter structure pointer
+ * @update_kcqe: kcqe pointer
+ *
+ * function callback exported via bnx2i - cnic driver interface to
+ * indicate async TCP events (RST) sent by the peer.
+ */
+static void bnx2i_cm_remote_abort(struct cnic_sock *cm_sk)
+{
+ struct bnx2i_endpoint *ep = (struct bnx2i_endpoint *) cm_sk->context;
+
+ ep->state = EP_STATE_TCP_RST_RCVD;
+ if (ep->conn)
+ bnx2i_recovery_que_add_conn(ep->hba, ep->conn);
+}
+
+
+static void bnx2i_send_nl_mesg(struct cnic_dev *dev, u32 msg_type,
+ char *buf, u16 buflen)
+{
+ struct bnx2i_hba *hba;
+
+ hba = bnx2i_find_hba_for_cnic(dev);
+ if (!hba)
+ return;
+
+ if (iscsi_offload_mesg(hba->shost, &bnx2i_iscsi_transport,
+ msg_type, buf, buflen))
+ printk(KERN_ALERT "bnx2i: private nl message send error\n");
+
+}
+
+
+/**
+ * bnx2i_cnic_cb - global template of bnx2i - cnic driver interface structure
+ * carrying callback function pointers
+ *
+ */
+struct cnic_ulp_ops bnx2i_cnic_cb = {
+ .cnic_init = bnx2i_ulp_init,
+ .cnic_exit = bnx2i_ulp_exit,
+ .cnic_start = bnx2i_start,
+ .cnic_stop = bnx2i_stop,
+ .indicate_kcqes = bnx2i_indicate_kcqe,
+ .indicate_netevent = bnx2i_indicate_netevent,
+ .cm_connect_complete = bnx2i_cm_connect_cmpl,
+ .cm_close_complete = bnx2i_cm_close_cmpl,
+ .cm_abort_complete = bnx2i_cm_abort_cmpl,
+ .cm_remote_close = bnx2i_cm_remote_close,
+ .cm_remote_abort = bnx2i_cm_remote_abort,
+ .iscsi_nl_send_msg = bnx2i_send_nl_mesg,
+ .owner = THIS_MODULE
+};
+
+
+/**
+ * bnx2i_map_ep_dbell_regs - map connection doorbell registers
+ * @ep: bnx2i endpoint
+ *
+ * maps connection's SQ and RQ doorbell registers, 5706/5708/5709 hosts these
+ * register in BAR #0. Whereas in 57710 these register are accessed by
+ * mapping BAR #1
+ */
+int bnx2i_map_ep_dbell_regs(struct bnx2i_endpoint *ep)
+{
+ u32 cid_num;
+ u32 reg_off;
+ u32 first_l4l5;
+ u32 ctx_sz;
+ u32 config2;
+ resource_size_t reg_base;
+
+ cid_num = bnx2i_get_cid_num(ep);
+
+ if (test_bit(BNX2I_NX2_DEV_57710, &ep->hba->cnic_dev_type)) {
+ reg_base = pci_resource_start(ep->hba->pcidev,
+ BNX2X_DOORBELL_PCI_BAR);
+ reg_off = PAGE_SIZE * (cid_num & 0x1FFFF) + DPM_TRIGER_TYPE;
+ ep->qp.ctx_base = ioremap_nocache(reg_base + reg_off, 4);
+ goto arm_cq;
+ }
+
+ reg_base = ep->hba->netdev->base_addr;
+ if ((test_bit(BNX2I_NX2_DEV_5709, &ep->hba->cnic_dev_type)) &&
+ (ep->hba->mail_queue_access == BNX2I_MQ_BIN_MODE)) {
+ config2 = REG_RD(ep->hba, BNX2_MQ_CONFIG2);
+ first_l4l5 = config2 & BNX2_MQ_CONFIG2_FIRST_L4L5;
+ ctx_sz = (config2 & BNX2_MQ_CONFIG2_CONT_SZ) >> 3;
+ if (ctx_sz)
+ reg_off = CTX_OFFSET + MAX_CID_CNT * MB_KERNEL_CTX_SIZE
+ + PAGE_SIZE *
+ (((cid_num - first_l4l5) / ctx_sz) + 256);
+ else
+ reg_off = CTX_OFFSET + (MB_KERNEL_CTX_SIZE * cid_num);
+ } else
+ /* 5709 device in normal node and 5706/5708 devices */
+ reg_off = CTX_OFFSET + (MB_KERNEL_CTX_SIZE * cid_num);
+
+ ep->qp.ctx_base = ioremap_nocache(reg_base + reg_off,
+ MB_KERNEL_CTX_SIZE);
+ if (!ep->qp.ctx_base)
+ return -ENOMEM;
+
+arm_cq:
+ bnx2i_arm_cq_event_coalescing(ep, CNIC_ARM_CQE);
+ return 0;
+}
diff --git a/drivers/scsi/bnx2i/bnx2i_init.c b/drivers/scsi/bnx2i/bnx2i_init.c
new file mode 100644
index 0000000..ae4b2d5
--- /dev/null
+++ b/drivers/scsi/bnx2i/bnx2i_init.c
@@ -0,0 +1,438 @@
+/* bnx2i.c: Broadcom NetXtreme II iSCSI driver.
+ *
+ * Copyright (c) 2006 - 2009 Broadcom Corporation
+ * Copyright (c) 2007, 2008 Red Hat, Inc. All rights reserved.
+ * Copyright (c) 2007, 2008 Mike Christie
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ *
+ * Written by: Anil Veerabhadrappa (anilgv@broadcom.com)
+ */
+
+#include "bnx2i.h"
+
+static struct list_head adapter_list = LIST_HEAD_INIT(adapter_list);
+static u32 adapter_count;
+static int bnx2i_reg_device;
+
+#define DRV_MODULE_NAME "bnx2i"
+#define DRV_MODULE_VERSION "2.0.1d"
+#define DRV_MODULE_RELDATE "Mar 25, 2009"
+
+static char version[] __devinitdata =
+ "Broadcom NetXtreme II iSCSI Driver " DRV_MODULE_NAME \
+ " v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n";
+
+
+MODULE_AUTHOR("Anil Veerabhadrappa <anilgv@broadcom.com>");
+MODULE_DESCRIPTION("Broadcom NetXtreme II BCM5706/5708/5709 iSCSI Driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_MODULE_VERSION);
+
+static DEFINE_RWLOCK(bnx2i_dev_lock);
+
+unsigned int event_coal_div = 1;
+module_param(event_coal_div, int, 0664);
+MODULE_PARM_DESC(event_coal_div, "Event Coalescing Divide Factor");
+
+unsigned int en_tcp_dack = 1;
+module_param(en_tcp_dack, int, 0664);
+MODULE_PARM_DESC(en_tcp_dack, "Enable TCP Delayed ACK");
+
+unsigned int error_mask1 = 0x00;
+module_param(error_mask1, int, 0664);
+MODULE_PARM_DESC(error_mask1, "Config FW iSCSI Error Mask #1");
+
+unsigned int error_mask2 = 0x00;
+module_param(error_mask2, int, 0664);
+MODULE_PARM_DESC(error_mask2, "Config FW iSCSI Error Mask #2");
+
+unsigned int sq_size;
+module_param(sq_size, int, 0664);
+MODULE_PARM_DESC(sq_size, "Configure SQ size");
+
+unsigned int rq_size = BNX2I_RQ_WQES_DEFAULT;
+module_param(rq_size, int, 0664);
+MODULE_PARM_DESC(rq_size, "Configure RQ size");
+
+u64 iscsi_error_mask = 0x00;
+
+static void bnx2i_unreg_one_device(struct bnx2i_hba *hba) ;
+
+
+/**
+ * bnx2i_identify_device - identifies NetXtreme II device type
+ * @hba: Adapter structure pointer
+ *
+ * This function identifies the NX2 device type and sets appropriate
+ * queue mailbox register access method, 5709 requires driver to
+ * access MBOX regs using *bin* mode
+ */
+void bnx2i_identify_device(struct bnx2i_hba *hba)
+{
+ hba->cnic_dev_type = 0;
+ if ((hba->pci_did == PCI_DEVICE_ID_NX2_5706) ||
+ (hba->pci_did == PCI_DEVICE_ID_NX2_5706S))
+ set_bit(BNX2I_NX2_DEV_5706, &hba->cnic_dev_type);
+ else if ((hba->pci_did == PCI_DEVICE_ID_NX2_5708) ||
+ (hba->pci_did == PCI_DEVICE_ID_NX2_5708S))
+ set_bit(BNX2I_NX2_DEV_5708, &hba->cnic_dev_type);
+ else if ((hba->pci_did == PCI_DEVICE_ID_NX2_5709) ||
+ (hba->pci_did == PCI_DEVICE_ID_NX2_5709S)) {
+ set_bit(BNX2I_NX2_DEV_5709, &hba->cnic_dev_type);
+ hba->mail_queue_access = BNX2I_MQ_BIN_MODE;
+ } else if (hba->pci_did == PCI_DEVICE_ID_NX2_57710 ||
+ hba->pci_did == PCI_DEVICE_ID_NX2_57711)
+ set_bit(BNX2I_NX2_DEV_57710, &hba->cnic_dev_type);
+}
+
+
+/**
+ * get_adapter_list_head - returns head of adapter list
+ */
+struct bnx2i_hba *get_adapter_list_head(void)
+{
+ struct bnx2i_hba *hba = NULL;
+ struct bnx2i_hba *tmp_hba;
+
+ if (!adapter_count)
+ goto hba_not_found;
+
+ read_lock(&bnx2i_dev_lock);
+ list_for_each_entry(tmp_hba, &adapter_list, link) {
+ if (tmp_hba->cnic && tmp_hba->cnic->cm_select_dev) {
+ hba = tmp_hba;
+ break;
+ }
+ }
+ read_unlock(&bnx2i_dev_lock);
+hba_not_found:
+ return hba;
+}
+
+
+/**
+ * bnx2i_find_hba_for_cnic - maps cnic device instance to bnx2i adapter instance
+ * @cnic: pointer to cnic device instance
+ *
+ */
+struct bnx2i_hba *bnx2i_find_hba_for_cnic(struct cnic_dev *cnic)
+{
+ struct bnx2i_hba *hba, *temp;
+
+ read_lock(&bnx2i_dev_lock);
+ list_for_each_entry_safe(hba, temp, &adapter_list, link) {
+ if (hba->cnic == cnic) {
+ read_unlock(&bnx2i_dev_lock);
+ return hba;
+ }
+ }
+ read_unlock(&bnx2i_dev_lock);
+ return NULL;
+}
+
+
+/**
+ * bnx2i_start - cnic callback to initialize & start adapter instance
+ * @handle: transparent handle pointing to adapter structure
+ *
+ * This function maps adapter structure to pcidev structure and initiates
+ * firmware handshake to enable/initialize on chip iscsi components
+ * This bnx2i - cnic interface api callback is issued after following
+ * 2 conditions are met -
+ * a) underlying network interface is up (marked by event 'NETDEV_UP'
+ * from netdev
+ * b) bnx2i adapter instance is registered
+ */
+void bnx2i_start(void *handle)
+{
+#define BNX2I_INIT_POLL_TIME (1000 / HZ)
+ struct bnx2i_hba *hba = handle;
+ int i = HZ;
+
+ bnx2i_send_fw_iscsi_init_msg(hba);
+ while (!test_bit(ADAPTER_STATE_UP, &hba->adapter_state) && i--)
+ msleep(BNX2I_INIT_POLL_TIME);
+}
+
+
+/**
+ * bnx2i_stop - cnic callback to shutdown adapter instance
+ * @handle: transparent handle pointing to adapter structure
+ *
+ * driver checks if adapter is already in shutdown mode, if not start
+ * the shutdown process
+ */
+void bnx2i_stop(void *handle)
+{
+ struct bnx2i_hba *hba = handle;
+
+ /* check if cleanup happened in GOING_DOWN context */
+ clear_bit(ADAPTER_STATE_UP, &hba->adapter_state);
+ if (!test_and_clear_bit(ADAPTER_STATE_GOING_DOWN,
+ &hba->adapter_state))
+ iscsi_host_for_each_session(hba->shost,
+ bnx2i_drop_session);
+}
+
+/**
+ * bnx2i_register_device - register bnx2i adapter instance with the cnic driver
+ * @hba: Adapter instance to register
+ *
+ * registers bnx2i adapter instance with the cnic driver while holding the
+ * adapter structure lock
+ */
+void bnx2i_register_device(struct bnx2i_hba *hba)
+{
+ if (test_bit(ADAPTER_STATE_GOING_DOWN, &hba->adapter_state) ||
+ test_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic)) {
+ return;
+ }
+
+ hba->cnic->register_device(hba->cnic, CNIC_ULP_ISCSI, hba);
+
+ spin_lock(&hba->lock);
+ bnx2i_reg_device++;
+ spin_unlock(&hba->lock);
+
+ set_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic);
+}
+
+
+/**
+ * bnx2i_reg_dev_all - registers all adapter instances with the cnic driver
+ *
+ * registers all bnx2i adapter instances with the cnic driver while holding
+ * the global resource lock
+ */
+void bnx2i_reg_dev_all(void)
+{
+ struct bnx2i_hba *hba, *temp;
+
+ read_lock(&bnx2i_dev_lock);
+ list_for_each_entry_safe(hba, temp, &adapter_list, link)
+ bnx2i_register_device(hba);
+ read_unlock(&bnx2i_dev_lock);
+}
+
+
+/**
+ * bnx2i_unreg_one_device - unregister adapter instance with the cnic driver
+ * @hba: Adapter instance to unregister
+ *
+ * registers bnx2i adapter instance with the cnic driver while holding
+ * the adapter structure lock
+ */
+static void bnx2i_unreg_one_device(struct bnx2i_hba *hba)
+{
+ if (hba->ofld_conns_active ||
+ !test_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic) ||
+ test_bit(ADAPTER_STATE_GOING_DOWN, &hba->adapter_state))
+ return;
+
+ hba->cnic->unregister_device(hba->cnic, CNIC_ULP_ISCSI);
+
+ spin_lock(&hba->lock);
+ bnx2i_reg_device--;
+ spin_unlock(&hba->lock);
+
+ /* ep_disconnect could come before NETDEV_DOWN, driver won't
+ * see NETDEV_DOWN as it already unregistered itself.
+ */
+ hba->adapter_state = 0;
+ clear_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic);
+}
+
+/**
+ * bnx2i_unreg_dev_all - unregisters all bnx2i instances with the cnic driver
+ *
+ * unregisters all bnx2i adapter instances with the cnic driver while holding
+ * the global resource lock
+ */
+void bnx2i_unreg_dev_all(void)
+{
+ struct bnx2i_hba *hba, *temp;
+
+ read_lock(&bnx2i_dev_lock);
+ list_for_each_entry_safe(hba, temp, &adapter_list, link)
+ bnx2i_unreg_one_device(hba);
+ read_unlock(&bnx2i_dev_lock);
+}
+
+
+/**
+ * bnx2i_init_one - initialize an adapter instance and allocate memory resources
+ * @hba: bnx2i adapter instance
+ * @cnic: cnic device handle
+ *
+ * Global resource lock and host adapter lock is held during critical sections
+ * below. This routine is called from cnic_register_driver() context and
+ * work horse thread which does majority of device specific initialization
+ */
+static int bnx2i_init_one(struct bnx2i_hba *hba, struct cnic_dev *cnic)
+{
+ int rc;
+
+ read_lock(&bnx2i_dev_lock);
+ if (bnx2i_reg_device &&
+ !test_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic)) {
+ rc = cnic->register_device(cnic, CNIC_ULP_ISCSI, hba);
+ if (rc) /* duplicate registration */
+ printk(KERN_ERR "bnx2i- dev reg failed\n");
+
+ spin_lock(&hba->lock);
+ bnx2i_reg_device++;
+ hba->age++;
+ spin_unlock(&hba->lock);
+
+ set_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic);
+ }
+ read_unlock(&bnx2i_dev_lock);
+
+ write_lock(&bnx2i_dev_lock);
+ list_add_tail(&hba->link, &adapter_list);
+ adapter_count++;
+ write_unlock(&bnx2i_dev_lock);
+ return 0;
+}
+
+
+/**
+ * bnx2i_ulp_init - initialize an adapter instance
+ * @dev: cnic device handle
+ *
+ * Called from cnic_register_driver() context to initialize all enumerated
+ * cnic devices. This routine allocate adapter structure and other
+ * device specific resources.
+ */
+void bnx2i_ulp_init(struct cnic_dev *dev)
+{
+ struct bnx2i_hba *hba;
+
+ /* Allocate a HBA structure for this device */
+ hba = bnx2i_alloc_hba(dev);
+ if (!hba) {
+ printk(KERN_ERR "bnx2i init: hba initialization failed\n");
+ return;
+ }
+
+ /* Get PCI related information and update hba struct members */
+ clear_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic);
+ if (bnx2i_init_one(hba, dev)) {
+ printk(KERN_ERR "bnx2i - hba %p init failed\n", hba);
+ bnx2i_free_hba(hba);
+ } else
+ hba->cnic = dev;
+}
+
+
+/**
+ * bnx2i_ulp_exit - shuts down adapter instance and frees all resources
+ * @dev: cnic device handle
+ *
+ */
+void bnx2i_ulp_exit(struct cnic_dev *dev)
+{
+ struct bnx2i_hba *hba;
+
+ hba = bnx2i_find_hba_for_cnic(dev);
+ if (!hba) {
+ printk(KERN_INFO "bnx2i_ulp_exit: hba not "
+ "found, dev 0x%p\n", dev);
+ return;
+ }
+ write_lock(&bnx2i_dev_lock);
+ list_del_init(&hba->link);
+ adapter_count--;
+
+ if (test_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic)) {
+ hba->cnic->unregister_device(hba->cnic, CNIC_ULP_ISCSI);
+ clear_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic);
+
+ spin_lock(&hba->lock);
+ bnx2i_reg_device--;
+ spin_unlock(&hba->lock);
+ }
+ write_unlock(&bnx2i_dev_lock);
+
+ bnx2i_free_hba(hba);
+}
+
+
+/**
+ * bnx2i_mod_init - module init entry point
+ *
+ * initialize any driver wide global data structures such as endpoint pool,
+ * tcp port manager/queue, sysfs. finally driver will register itself
+ * with the cnic module
+ */
+static int __init bnx2i_mod_init(void)
+{
+ int err;
+
+ printk(KERN_INFO "%s", version);
+
+ if (!is_power_of_2(sq_size))
+ sq_size = roundup_pow_of_two(sq_size);
+
+ bnx2i_scsi_xport_template =
+ iscsi_register_transport(&bnx2i_iscsi_transport);
+ if (!bnx2i_scsi_xport_template) {
+ printk(KERN_ERR "Could not register bnx2i transport.\n");
+ err = -ENOMEM;
+ goto out;
+ }
+
+ err = cnic_register_driver(CNIC_ULP_ISCSI, &bnx2i_cnic_cb);
+ if (err) {
+ printk(KERN_ERR "Could not register bnx2i cnic driver.\n");
+ goto unreg_xport;
+ }
+
+ return 0;
+
+unreg_xport:
+ iscsi_unregister_transport(&bnx2i_iscsi_transport);
+out:
+ return err;
+}
+
+
+/**
+ * bnx2i_mod_exit - module cleanup/exit entry point
+ *
+ * Global resource lock and host adapter lock is held during critical sections
+ * in this function. Driver will browse through the adapter list, cleans-up
+ * each instance, unregisters iscsi transport name and finally driver will
+ * unregister itself with the cnic module
+ */
+static void __exit bnx2i_mod_exit(void)
+{
+ struct bnx2i_hba *hba;
+
+ write_lock(&bnx2i_dev_lock);
+ while (!list_empty(&adapter_list)) {
+ hba = list_entry(adapter_list.next, struct bnx2i_hba, link);
+ list_del(&hba->link);
+ adapter_count--;
+
+ if (test_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic)) {
+ hba->cnic->unregister_device(hba->cnic, CNIC_ULP_ISCSI);
+ clear_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic);
+ bnx2i_reg_device--;
+ }
+
+ write_unlock(&bnx2i_dev_lock);
+ bnx2i_free_hba(hba);
+ write_lock(&bnx2i_dev_lock);
+ }
+ write_unlock(&bnx2i_dev_lock);
+
+ iscsi_unregister_transport(&bnx2i_iscsi_transport);
+ cnic_unregister_driver(CNIC_ULP_ISCSI);
+}
+
+module_init(bnx2i_mod_init);
+module_exit(bnx2i_mod_exit);
diff --git a/drivers/scsi/bnx2i/bnx2i_iscsi.c b/drivers/scsi/bnx2i/bnx2i_iscsi.c
new file mode 100644
index 0000000..f741219
--- /dev/null
+++ b/drivers/scsi/bnx2i/bnx2i_iscsi.c
@@ -0,0 +1,2064 @@
+/*
+ * bnx2i_iscsi.c: Broadcom NetXtreme II iSCSI driver.
+ *
+ * Copyright (c) 2006 - 2009 Broadcom Corporation
+ * Copyright (c) 2007, 2008 Red Hat, Inc. All rights reserved.
+ * Copyright (c) 2007, 2008 Mike Christie
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ *
+ * Written by: Anil Veerabhadrappa (anilgv@broadcom.com)
+ */
+
+#include <scsi/scsi_tcq.h>
+#include <scsi/libiscsi.h>
+#include "bnx2i.h"
+
+struct scsi_transport_template *bnx2i_scsi_xport_template;
+struct iscsi_transport bnx2i_iscsi_transport;
+static struct scsi_host_template bnx2i_host_template;
+
+/*
+ * Global endpoint resource info
+ */
+static DEFINE_SPINLOCK(bnx2i_resc_lock); /* protects global resources */
+
+
+static int bnx2i_adapter_ready(struct bnx2i_hba *hba)
+{
+ int retval = 0;
+
+ if (!hba || !test_bit(ADAPTER_STATE_UP, &hba->adapter_state) ||
+ test_bit(ADAPTER_STATE_GOING_DOWN, &hba->adapter_state) ||
+ test_bit(ADAPTER_STATE_LINK_DOWN, &hba->adapter_state))
+ retval = -EPERM;
+ return retval;
+}
+
+/**
+ * bnx2i_get_write_cmd_bd_idx - identifies various BD bookmarks
+ * @cmd: iscsi cmd struct pointer
+ * @buf_off: absolute buffer offset
+ * @start_bd_off: u32 pointer to return the offset within the BD
+ * indicated by 'start_bd_idx' on which 'buf_off' falls
+ * @start_bd_idx: index of the BD on which 'buf_off' falls
+ *
+ * identifies & marks various bd info for scsi command's imm data,
+ * unsolicited data and the first solicited data seq.
+ */
+static void bnx2i_get_write_cmd_bd_idx(struct bnx2i_cmd *cmd, u32 buf_off,
+ u32 *start_bd_off, u32 *start_bd_idx)
+{
+ struct iscsi_bd *bd_tbl = cmd->io_tbl.bd_tbl;
+ u32 cur_offset = 0;
+ u32 cur_bd_idx = 0;
+
+ if (buf_off) {
+ while (buf_off >= (cur_offset + bd_tbl->buffer_length)) {
+ cur_offset += bd_tbl->buffer_length;
+ cur_bd_idx++;
+ bd_tbl++;
+ }
+ }
+
+ *start_bd_off = buf_off - cur_offset;
+ *start_bd_idx = cur_bd_idx;
+}
+
+/**
+ * bnx2i_setup_write_cmd_bd_info - sets up BD various information
+ * @task: transport layer's cmd struct pointer
+ *
+ * identifies & marks various bd info for scsi command's immediate data,
+ * unsolicited data and first solicited data seq which includes BD start
+ * index & BD buf off. his function takes into account iscsi parameter such
+ * as immediate data and unsolicited data is support on this connection.
+ */
+static void bnx2i_setup_write_cmd_bd_info(struct iscsi_task *task)
+{
+ struct bnx2i_cmd *cmd = task->dd_data;
+ u32 start_bd_offset;
+ u32 start_bd_idx;
+ u32 buffer_offset = 0;
+ u32 cmd_len = cmd->req.total_data_transfer_length;
+
+ /* if ImmediateData is turned off & IntialR2T is turned on,
+ * there will be no immediate or unsolicited data, just return.
+ */
+ if (!iscsi_task_has_unsol_data(task) && !task->imm_count)
+ return;
+
+ /* Immediate data */
+ buffer_offset += task->imm_count;
+ if (task->imm_count == cmd_len)
+ return;
+
+ if (iscsi_task_has_unsol_data(task)) {
+ bnx2i_get_write_cmd_bd_idx(cmd, buffer_offset,
+ &start_bd_offset, &start_bd_idx);
+ cmd->req.ud_buffer_offset = start_bd_offset;
+ cmd->req.ud_start_bd_index = start_bd_idx;
+ buffer_offset += task->unsol_r2t.data_length;
+ }
+
+ if (buffer_offset != cmd_len) {
+ bnx2i_get_write_cmd_bd_idx(cmd, buffer_offset,
+ &start_bd_offset, &start_bd_idx);
+ if ((start_bd_offset > task->conn->session->first_burst) ||
+ (start_bd_idx > scsi_sg_count(cmd->scsi_cmd))) {
+ int i = 0;
+
+ iscsi_conn_printk(KERN_ALERT, task->conn,
+ "bnx2i- error, buf offset 0x%x "
+ "bd_valid %d use_sg %d\n",
+ buffer_offset, cmd->io_tbl.bd_valid,
+ scsi_sg_count(cmd->scsi_cmd));
+ for (i = 0; i < cmd->io_tbl.bd_valid; i++)
+ iscsi_conn_printk(KERN_ALERT, task->conn,
+ "bnx2i err, bd[%d]: len %x\n",
+ i, cmd->io_tbl.bd_tbl[i].\
+ buffer_length);
+ }
+ cmd->req.sd_buffer_offset = start_bd_offset;
+ cmd->req.sd_start_bd_index = start_bd_idx;
+ }
+}
+
+
+
+/**
+ * bnx2i_map_scsi_sg - maps IO buffer and prepares the BD table
+ * @hba: adapter instance
+ * @cmd: iscsi cmd struct pointer
+ *
+ * map SG list
+ */
+static int bnx2i_map_scsi_sg(struct bnx2i_hba *hba, struct bnx2i_cmd *cmd)
+{
+ struct scsi_cmnd *sc = cmd->scsi_cmd;
+ struct iscsi_bd *bd = cmd->io_tbl.bd_tbl;
+ struct scatterlist *sg;
+ int byte_count = 0;
+ int bd_count = 0;
+ int sg_count;
+ int sg_len;
+ u64 addr;
+ int i;
+
+ BUG_ON(scsi_sg_count(sc) > ISCSI_MAX_BDS_PER_CMD);
+
+ sg_count = scsi_dma_map(sc);
+
+ scsi_for_each_sg(sc, sg, sg_count, i) {
+ sg_len = sg_dma_len(sg);
+ addr = (u64) sg_dma_address(sg);
+ bd[bd_count].buffer_addr_lo = addr & 0xffffffff;
+ bd[bd_count].buffer_addr_hi = addr >> 32;
+ bd[bd_count].buffer_length = sg_len;
+ bd[bd_count].flags = 0;
+ if (bd_count == 0)
+ bd[bd_count].flags = ISCSI_BD_FIRST_IN_BD_CHAIN;
+
+ byte_count += sg_len;
+ bd_count++;
+ }
+
+ if (bd_count)
+ bd[bd_count - 1].flags |= ISCSI_BD_LAST_IN_BD_CHAIN;
+
+ BUG_ON(byte_count != scsi_bufflen(sc));
+ return bd_count;
+}
+
+/**
+ * bnx2i_iscsi_map_sg_list - maps SG list
+ * @cmd: iscsi cmd struct pointer
+ *
+ * creates BD list table for the command
+ */
+static void bnx2i_iscsi_map_sg_list(struct bnx2i_cmd *cmd)
+{
+ int bd_count;
+
+ bd_count = bnx2i_map_scsi_sg(cmd->conn->hba, cmd);
+ if (!bd_count) {
+ struct iscsi_bd *bd = cmd->io_tbl.bd_tbl;
+
+ bd[0].buffer_addr_lo = bd[0].buffer_addr_hi = 0;
+ bd[0].buffer_length = bd[0].flags = 0;
+ }
+ cmd->io_tbl.bd_valid = bd_count;
+}
+
+
+/**
+ * bnx2i_iscsi_unmap_sg_list - unmaps SG list
+ * @cmd: iscsi cmd struct pointer
+ *
+ * unmap IO buffers and invalidate the BD table
+ */
+void bnx2i_iscsi_unmap_sg_list(struct bnx2i_cmd *cmd)
+{
+ struct scsi_cmnd *sc = cmd->scsi_cmd;
+
+ if (cmd->io_tbl.bd_valid && sc) {
+ scsi_dma_unmap(sc);
+ cmd->io_tbl.bd_valid = 0;
+ }
+}
+
+static void bnx2i_setup_cmd_wqe_template(struct bnx2i_cmd *cmd)
+{
+ memset(&cmd->req, 0x00, sizeof(cmd->req));
+ cmd->req.op_code = 0xFF;
+ cmd->req.bd_list_addr_lo = (u32) cmd->io_tbl.bd_tbl_dma;
+ cmd->req.bd_list_addr_hi =
+ (u32) ((u64) cmd->io_tbl.bd_tbl_dma >> 32);
+
+}
+
+
+/**
+ * bnx2i_bind_conn_to_iscsi_cid - bind conn structure to 'iscsi_cid'
+ * @hba: pointer to adapter instance
+ * @conn: pointer to iscsi connection
+ * @iscsi_cid: iscsi context ID, range 0 - (MAX_CONN - 1)
+ *
+ * update iscsi cid table entry with connection pointer. This enables
+ * driver to quickly get hold of connection structure pointer in
+ * completion/interrupt thread using iscsi context ID
+ */
+static int bnx2i_bind_conn_to_iscsi_cid(struct bnx2i_hba *hba,
+ struct bnx2i_conn *bnx2i_conn,
+ u32 iscsi_cid)
+{
+ if (hba && hba->cid_que.conn_cid_tbl[iscsi_cid]) {
+ iscsi_conn_printk(KERN_ALERT, bnx2i_conn->cls_conn->dd_data,
+ "conn bind - entry #%d not free\n", iscsi_cid);
+ return -EBUSY;
+ }
+
+ hba->cid_que.conn_cid_tbl[iscsi_cid] = bnx2i_conn;
+ return 0;
+}
+
+
+/**
+ * bnx2i_get_conn_from_id - maps an iscsi cid to corresponding conn ptr
+ * @hba: pointer to adapter instance
+ * @iscsi_cid: iscsi context ID, range 0 - (MAX_CONN - 1)
+ */
+struct bnx2i_conn *bnx2i_get_conn_from_id(struct bnx2i_hba *hba,
+ u16 iscsi_cid)
+{
+ if (!hba->cid_que.conn_cid_tbl) {
+ printk(KERN_ERR "bnx2i: ERROR - missing conn<->cid table\n");
+ return NULL;
+
+ } else if (iscsi_cid >= hba->max_active_conns) {
+ printk(KERN_ERR "bnx2i: wrong cid #%d\n", iscsi_cid);
+ return NULL;
+ }
+ return hba->cid_que.conn_cid_tbl[iscsi_cid];
+}
+
+
+/**
+ * bnx2i_alloc_iscsi_cid - allocates a iscsi_cid from free pool
+ * @hba: pointer to adapter instance
+ */
+static u32 bnx2i_alloc_iscsi_cid(struct bnx2i_hba *hba)
+{
+ int idx;
+
+ if (!hba->cid_que.cid_free_cnt)
+ return -1;
+
+ idx = hba->cid_que.cid_q_cons_idx;
+ hba->cid_que.cid_q_cons_idx++;
+ if (hba->cid_que.cid_q_cons_idx == hba->cid_que.cid_q_max_idx)
+ hba->cid_que.cid_q_cons_idx = 0;
+
+ hba->cid_que.cid_free_cnt--;
+ return hba->cid_que.cid_que[idx];
+}
+
+
+/**
+ * bnx2i_free_iscsi_cid - returns tcp port to free list
+ * @hba: pointer to adapter instance
+ * @iscsi_cid: iscsi context ID to free
+ */
+static void bnx2i_free_iscsi_cid(struct bnx2i_hba *hba, u16 iscsi_cid)
+{
+ int idx;
+
+ if (iscsi_cid == (u16) -1)
+ return;
+
+ hba->cid_que.cid_free_cnt++;
+
+ idx = hba->cid_que.cid_q_prod_idx;
+ hba->cid_que.cid_que[idx] = iscsi_cid;
+ hba->cid_que.conn_cid_tbl[iscsi_cid] = NULL;
+ hba->cid_que.cid_q_prod_idx++;
+ if (hba->cid_que.cid_q_prod_idx == hba->cid_que.cid_q_max_idx)
+ hba->cid_que.cid_q_prod_idx = 0;
+}
+
+
+/**
+ * bnx2i_setup_free_cid_que - sets up free iscsi cid queue
+ * @hba: pointer to adapter instance
+ *
+ * allocates memory for iscsi cid queue & 'cid - conn ptr' mapping table,
+ * and initialize table attributes
+ */
+static int bnx2i_setup_free_cid_que(struct bnx2i_hba *hba)
+{
+ int mem_size;
+ int i;
+
+ mem_size = hba->max_active_conns * sizeof(u32);
+ mem_size = (mem_size + (PAGE_SIZE - 1)) & PAGE_MASK;
+
+ hba->cid_que.cid_que_base = kmalloc(mem_size, GFP_KERNEL);
+ if (!hba->cid_que.cid_que_base)
+ return -ENOMEM;
+
+ mem_size = hba->max_active_conns * sizeof(struct bnx2i_conn *);
+ mem_size = (mem_size + (PAGE_SIZE - 1)) & PAGE_MASK;
+ hba->cid_que.conn_cid_tbl = kmalloc(mem_size, GFP_KERNEL);
+ if (!hba->cid_que.conn_cid_tbl) {
+ kfree(hba->cid_que.cid_que_base);
+ hba->cid_que.cid_que_base = NULL;
+ return -ENOMEM;
+ }
+
+ hba->cid_que.cid_que = (u32 *)hba->cid_que.cid_que_base;
+ hba->cid_que.cid_q_prod_idx = 0;
+ hba->cid_que.cid_q_cons_idx = 0;
+ hba->cid_que.cid_q_max_idx = hba->max_active_conns;
+ hba->cid_que.cid_free_cnt = hba->max_active_conns;
+
+ for (i = 0; i < hba->max_active_conns; i++) {
+ hba->cid_que.cid_que[i] = i;
+ hba->cid_que.conn_cid_tbl[i] = NULL;
+ }
+ return 0;
+}
+
+
+/**
+ * bnx2i_release_free_cid_que - releases 'iscsi_cid' queue resources
+ * @hba: pointer to adapter instance
+ */
+static void bnx2i_release_free_cid_que(struct bnx2i_hba *hba)
+{
+ kfree(hba->cid_que.cid_que_base);
+ hba->cid_que.cid_que_base = NULL;
+
+ kfree(hba->cid_que.conn_cid_tbl);
+ hba->cid_que.conn_cid_tbl = NULL;
+}
+
+
+/**
+ * bnx2i_alloc_ep - allocates ep structure from global pool
+ * @hba: pointer to adapter instance
+ *
+ * routine allocates a free endpoint structure from global pool and
+ * a tcp port to be used for this connection. Global resource lock,
+ * 'bnx2i_resc_lock' is held while accessing shared global data structures
+ */
+static struct iscsi_endpoint *bnx2i_alloc_ep(struct bnx2i_hba *hba)
+{
+ struct iscsi_endpoint *ep;
+ struct bnx2i_endpoint *bnx2i_ep;
+
+ ep = iscsi_create_endpoint(sizeof(*bnx2i_ep));
+ if (!ep) {
+ printk(KERN_ERR "bnx2i: Could not allocate ep\n");
+ return NULL;
+ }
+
+ bnx2i_ep = ep->dd_data;
+ INIT_LIST_HEAD(&bnx2i_ep->link);
+ bnx2i_ep->state = EP_STATE_IDLE;
+ bnx2i_ep->hba = hba;
+ bnx2i_ep->hba_age = hba->age;
+ hba->ofld_conns_active++;
+ init_waitqueue_head(&bnx2i_ep->ofld_wait);
+ return ep;
+}
+
+
+/**
+ * bnx2i_free_ep - free endpoint
+ * @ep: pointer to iscsi endpoint structure
+ */
+static void bnx2i_free_ep(struct iscsi_endpoint *ep)
+{
+ struct bnx2i_endpoint *bnx2i_ep = ep->dd_data;
+ unsigned long flags;
+
+ spin_lock_irqsave(&bnx2i_resc_lock, flags);
+ bnx2i_ep->state = EP_STATE_IDLE;
+ bnx2i_ep->hba->ofld_conns_active--;
+
+ bnx2i_free_iscsi_cid(bnx2i_ep->hba, bnx2i_ep->ep_iscsi_cid);
+ if (bnx2i_ep->conn) {
+ bnx2i_ep->conn->ep = NULL;
+ bnx2i_ep->conn = NULL;
+ }
+
+ bnx2i_ep->hba = NULL;
+ spin_unlock_irqrestore(&bnx2i_resc_lock, flags);
+ iscsi_destroy_endpoint(ep);
+}
+
+
+/**
+ * bnx2i_alloc_bdt - allocates buffer descriptor (BD) table for the command
+ * @hba: adapter instance pointer
+ * @session: iscsi session pointer
+ * @cmd: iscsi command structure
+ */
+static int bnx2i_alloc_bdt(struct bnx2i_hba *hba, struct iscsi_session *session,
+ struct bnx2i_cmd *cmd)
+{
+ struct io_bdt *io = &cmd->io_tbl;
+ struct iscsi_bd *bd;
+
+ io->bd_tbl = dma_alloc_coherent(&hba->pcidev->dev,
+ ISCSI_MAX_BDS_PER_CMD * sizeof(*bd),
+ &io->bd_tbl_dma, GFP_KERNEL);
+ if (!io->bd_tbl) {
+ iscsi_session_printk(KERN_ERR, session, "Could not "
+ "allocate bdt.\n");
+ return -ENOMEM;
+ }
+ io->bd_valid = 0;
+ return 0;
+}
+
+/**
+ * bnx2i_destroy_cmd_pool - destroys iscsi command pool and release BD table
+ * @hba: adapter instance pointer
+ * @session: iscsi session pointer
+ * @cmd: iscsi command structure
+ */
+static void bnx2i_destroy_cmd_pool(struct bnx2i_hba *hba,
+ struct iscsi_session *session)
+{
+ int i;
+
+ for (i = 0; i < session->cmds_max; i++) {
+ struct iscsi_task *task = session->cmds[i];
+ struct bnx2i_cmd *cmd = task->dd_data;
+
+ if (cmd->io_tbl.bd_tbl)
+ dma_free_coherent(&hba->pcidev->dev,
+ ISCSI_MAX_BDS_PER_CMD *
+ sizeof(struct iscsi_bd),
+ cmd->io_tbl.bd_tbl,
+ cmd->io_tbl.bd_tbl_dma);
+ }
+
+}
+
+
+/**
+ * bnx2i_setup_cmd_pool - sets up iscsi command pool for the session
+ * @hba: adapter instance pointer
+ * @session: iscsi session pointer
+ */
+static int bnx2i_setup_cmd_pool(struct bnx2i_hba *hba,
+ struct iscsi_session *session)
+{
+ int i;
+
+ for (i = 0; i < session->cmds_max; i++) {
+ struct iscsi_task *task = session->cmds[i];
+ struct bnx2i_cmd *cmd = task->dd_data;
+
+ /* Anil */
+ task->hdr = &cmd->hdr;
+ task->hdr_max = sizeof(struct iscsi_hdr);
+
+ if (bnx2i_alloc_bdt(hba, session, cmd))
+ goto free_bdts;
+ }
+
+ return 0;
+
+free_bdts:
+ bnx2i_destroy_cmd_pool(hba, session);
+ return -ENOMEM;
+}
+
+
+/**
+ * bnx2i_setup_mp_bdt - allocate BD table resources
+ * @hba: pointer to adapter structure
+ *
+ * Allocate memory for dummy buffer and associated BD
+ * table to be used by middle path (MP) requests
+ */
+static int bnx2i_setup_mp_bdt(struct bnx2i_hba *hba)
+{
+ int rc = 0;
+ struct iscsi_bd *mp_bdt;
+ u64 addr;
+
+ hba->mp_bd_tbl = dma_alloc_coherent(&hba->pcidev->dev, PAGE_SIZE,
+ &hba->mp_bd_dma, GFP_KERNEL);
+ if (!hba->mp_bd_tbl) {
+ printk(KERN_ERR "unable to allocate Middle Path BDT\n");
+ rc = -1;
+ goto out;
+ }
+
+ hba->dummy_buffer = dma_alloc_coherent(&hba->pcidev->dev, PAGE_SIZE,
+ &hba->dummy_buf_dma, GFP_KERNEL);
+ if (!hba->dummy_buffer) {
+ printk(KERN_ERR "unable to alloc Middle Path Dummy Buffer\n");
+ dma_free_coherent(&hba->pcidev->dev, PAGE_SIZE,
+ hba->mp_bd_tbl, hba->mp_bd_dma);
+ hba->mp_bd_tbl = NULL;
+ rc = -1;
+ goto out;
+ }
+
+ mp_bdt = (struct iscsi_bd *) hba->mp_bd_tbl;
+ addr = (unsigned long) hba->dummy_buf_dma;
+ mp_bdt->buffer_addr_lo = addr & 0xffffffff;
+ mp_bdt->buffer_addr_hi = addr >> 32;
+ mp_bdt->buffer_length = PAGE_SIZE;
+ mp_bdt->flags = ISCSI_BD_LAST_IN_BD_CHAIN |
+ ISCSI_BD_FIRST_IN_BD_CHAIN;
+out:
+ return rc;
+}
+
+
+/**
+ * bnx2i_free_mp_bdt - releases ITT back to free pool
+ * @hba: pointer to adapter instance
+ *
+ * free MP dummy buffer and associated BD table
+ */
+static void bnx2i_free_mp_bdt(struct bnx2i_hba *hba)
+{
+ if (hba->mp_bd_tbl) {
+ dma_free_coherent(&hba->pcidev->dev, PAGE_SIZE,
+ hba->mp_bd_tbl, hba->mp_bd_dma);
+ hba->mp_bd_tbl = NULL;
+ }
+ if (hba->dummy_buffer) {
+ dma_free_coherent(&hba->pcidev->dev, PAGE_SIZE,
+ hba->dummy_buffer, hba->dummy_buf_dma);
+ hba->dummy_buffer = NULL;
+ }
+ return;
+}
+
+/**
+ * bnx2i_drop_session - notifies iscsid of connection error.
+ * @hba: adapter instance pointer
+ * @session: iscsi session pointer
+ *
+ * This notifies iscsid that there is a error, so it can initiate
+ * recovery.
+ *
+ * This relies on caller using the iscsi class iterator so the object
+ * is refcounted and does not disapper from under us.
+ */
+void bnx2i_drop_session(struct iscsi_cls_session *cls_session)
+{
+ iscsi_session_failure(cls_session->dd_data, ISCSI_ERR_CONN_FAILED);
+}
+
+/**
+ * bnx2i_ep_destroy_list_add - add an entry to EP destroy list
+ * @hba: pointer to adapter instance
+ * @ep: pointer to endpoint (transport indentifier) structure
+ *
+ * EP destroy queue manager
+ */
+static int bnx2i_ep_destroy_list_add(struct bnx2i_hba *hba,
+ struct bnx2i_endpoint *ep)
+{
+ write_lock_bh(&hba->ep_rdwr_lock);
+ list_add_tail(&ep->link, &hba->ep_destroy_list);
+ write_unlock_bh(&hba->ep_rdwr_lock);
+ return 0;
+}
+
+/**
+ * bnx2i_ep_destroy_list_del - add an entry to EP destroy list
+ *
+ * @hba: pointer to adapter instance
+ * @ep: pointer to endpoint (transport indentifier) structure
+ *
+ * EP destroy queue manager
+ */
+static int bnx2i_ep_destroy_list_del(struct bnx2i_hba *hba,
+ struct bnx2i_endpoint *ep)
+{
+ write_lock_bh(&hba->ep_rdwr_lock);
+ list_del_init(&ep->link);
+ write_unlock_bh(&hba->ep_rdwr_lock);
+
+ return 0;
+}
+
+/**
+ * bnx2i_ep_ofld_list_add - add an entry to ep offload pending list
+ * @hba: pointer to adapter instance
+ * @ep: pointer to endpoint (transport indentifier) structure
+ *
+ * pending conn offload completion queue manager
+ */
+static int bnx2i_ep_ofld_list_add(struct bnx2i_hba *hba,
+ struct bnx2i_endpoint *ep)
+{
+ write_lock_bh(&hba->ep_rdwr_lock);
+ list_add_tail(&ep->link, &hba->ep_ofld_list);
+ write_unlock_bh(&hba->ep_rdwr_lock);
+ return 0;
+}
+
+/**
+ * bnx2i_ep_ofld_list_del - add an entry to ep offload pending list
+ * @hba: pointer to adapter instance
+ * @ep: pointer to endpoint (transport indentifier) structure
+ *
+ * pending conn offload completion queue manager
+ */
+static int bnx2i_ep_ofld_list_del(struct bnx2i_hba *hba,
+ struct bnx2i_endpoint *ep)
+{
+ write_lock_bh(&hba->ep_rdwr_lock);
+ list_del_init(&ep->link);
+ write_unlock_bh(&hba->ep_rdwr_lock);
+ return 0;
+}
+
+
+/**
+ * bnx2i_find_ep_in_ofld_list - find iscsi_cid in pending list of endpoints
+ *
+ * @hba: pointer to adapter instance
+ * @iscsi_cid: iscsi context ID to find
+ *
+ */
+struct bnx2i_endpoint *
+bnx2i_find_ep_in_ofld_list(struct bnx2i_hba *hba, u32 iscsi_cid)
+{
+ struct list_head *list;
+ struct list_head *tmp;
+ struct bnx2i_endpoint *ep;
+
+ read_lock_bh(&hba->ep_rdwr_lock);
+ list_for_each_safe(list, tmp, &hba->ep_ofld_list) {
+ ep = (struct bnx2i_endpoint *)list;
+
+ if (ep->ep_iscsi_cid == iscsi_cid)
+ break;
+ ep = NULL;
+ }
+ read_unlock_bh(&hba->ep_rdwr_lock);
+
+ if (!ep)
+ printk(KERN_ERR "l5 cid %d not found\n", iscsi_cid);
+ return ep;
+}
+
+
+/**
+ * bnx2i_find_ep_in_destroy_list - find iscsi_cid in destroy list
+ * @hba: pointer to adapter instance
+ * @iscsi_cid: iscsi context ID to find
+ *
+ */
+struct bnx2i_endpoint *
+bnx2i_find_ep_in_destroy_list(struct bnx2i_hba *hba, u32 iscsi_cid)
+{
+ struct list_head *list;
+ struct list_head *tmp;
+ struct bnx2i_endpoint *ep;
+
+ read_lock_bh(&hba->ep_rdwr_lock);
+ list_for_each_safe(list, tmp, &hba->ep_destroy_list) {
+ ep = (struct bnx2i_endpoint *)list;
+
+ if (ep->ep_iscsi_cid == iscsi_cid)
+ break;
+ ep = NULL;
+ }
+ read_unlock_bh(&hba->ep_rdwr_lock);
+
+ if (!ep)
+ printk(KERN_ERR "l5 cid %d not found\n", iscsi_cid);
+
+ return ep;
+}
+
+/**
+ * bnx2i_setup_host_queue_size - assigns shost->can_queue param
+ * @hba: pointer to adapter instance
+ * @shost: scsi host pointer
+ *
+ * Initializes 'can_queue' parameter based on how many outstanding commands
+ * the device can handle. Each device 5708/5709/57710 has different
+ * capabilities
+ */
+static void bnx2i_setup_host_queue_size(struct bnx2i_hba *hba,
+ struct Scsi_Host *shost)
+{
+ if (test_bit(BNX2I_NX2_DEV_5708, &hba->cnic_dev_type))
+ shost->can_queue = ISCSI_MAX_CMDS_PER_HBA_5708;
+ else if (test_bit(BNX2I_NX2_DEV_5709, &hba->cnic_dev_type))
+ shost->can_queue = ISCSI_MAX_CMDS_PER_HBA_5709;
+ else if (test_bit(BNX2I_NX2_DEV_57710, &hba->cnic_dev_type))
+ shost->can_queue = ISCSI_MAX_CMDS_PER_HBA_57710;
+ else
+ shost->can_queue = ISCSI_MAX_CMDS_PER_HBA_5708;
+}
+
+
+/**
+ * bnx2i_alloc_hba - allocate and init adapter instance
+ * @cnic: cnic device pointer
+ *
+ * allocate & initialize adapter structure and call other
+ * support routines to do per adapter initialization
+ */
+struct bnx2i_hba *bnx2i_alloc_hba(struct cnic_dev *cnic)
+{
+ struct Scsi_Host *shost;
+ struct bnx2i_hba *hba;
+
+ shost = iscsi_host_alloc(&bnx2i_host_template, sizeof(*hba), 0);
+ if (!shost)
+ return NULL;
+ shost->dma_boundary = cnic->pcidev->dma_mask;
+ shost->transportt = bnx2i_scsi_xport_template;
+ shost->max_id = ISCSI_MAX_CONNS_PER_HBA;
+ shost->max_channel = 0;
+ shost->max_lun = 512;
+ shost->max_cmd_len = 16;
+
+ hba = iscsi_host_priv(shost);
+ hba->shost = shost;
+ hba->netdev = cnic->netdev;
+ /* Get PCI related information and update hba struct members */
+ hba->pcidev = cnic->pcidev;
+ pci_dev_get(hba->pcidev);
+ hba->pci_did = hba->pcidev->device;
+ hba->pci_vid = hba->pcidev->vendor;
+ hba->pci_sdid = hba->pcidev->subsystem_device;
+ hba->pci_svid = hba->pcidev->subsystem_vendor;
+ hba->pci_func = PCI_FUNC(hba->pcidev->devfn);
+ hba->pci_devno = PCI_SLOT(hba->pcidev->devfn);
+ bnx2i_identify_device(hba);
+
+ bnx2i_identify_device(hba);
+ bnx2i_setup_host_queue_size(hba, shost);
+
+ if (test_bit(BNX2I_NX2_DEV_5709, &hba->cnic_dev_type)) {
+ hba->regview = ioremap_nocache(hba->netdev->base_addr,
+ BNX2_MQ_CONFIG2);
+ if (!hba->regview)
+ goto ioreg_map_err;
+ } else if (test_bit(BNX2I_NX2_DEV_57710, &hba->cnic_dev_type)) {
+ hba->regview = ioremap_nocache(hba->netdev->base_addr, 4096);
+ if (!hba->regview)
+ goto ioreg_map_err;
+ }
+
+ if (bnx2i_setup_mp_bdt(hba))
+ goto mp_bdt_mem_err;
+
+ INIT_LIST_HEAD(&hba->ep_ofld_list);
+ INIT_LIST_HEAD(&hba->ep_destroy_list);
+ rwlock_init(&hba->ep_rdwr_lock);
+
+ hba->mtu_supported = BNX2I_MAX_MTU_SUPPORTED;
+
+ /* different values for 5708/5709/57710 */
+ hba->max_active_conns = ISCSI_MAX_CONNS_PER_HBA;
+
+ if (bnx2i_setup_free_cid_que(hba))
+ goto cid_que_err;
+
+ /* SQ/RQ/CQ size can be changed via sysfx interface */
+ if (test_bit(BNX2I_NX2_DEV_57710, &hba->cnic_dev_type)) {
+ if (sq_size && sq_size <= BNX2I_5770X_SQ_WQES_MAX)
+ hba->max_sqes = sq_size;
+ else
+ hba->max_sqes = BNX2I_5770X_SQ_WQES_DEFAULT;
+ } else { /* 5706/5708/5709 */
+ if (sq_size && sq_size <= BNX2I_570X_SQ_WQES_MAX)
+ hba->max_sqes = sq_size;
+ else
+ hba->max_sqes = BNX2I_570X_SQ_WQES_DEFAULT;
+ }
+
+ hba->max_rqes = rq_size;
+ hba->max_cqes = hba->max_sqes + rq_size;
+ if (test_bit(BNX2I_NX2_DEV_57710, &hba->cnic_dev_type)) {
+ if (hba->max_cqes > BNX2I_5770X_CQ_WQES_MAX)
+ hba->max_cqes = BNX2I_5770X_CQ_WQES_MAX;
+ } else if (hba->max_cqes > BNX2I_570X_CQ_WQES_MAX)
+ hba->max_cqes = BNX2I_570X_CQ_WQES_MAX;
+
+ hba->num_ccell = hba->max_sqes / 2;
+
+ spin_lock_init(&hba->lock);
+ mutex_init(&hba->net_dev_lock);
+
+ if (iscsi_host_add(shost, &hba->pcidev->dev))
+ goto free_dump_mem;
+ return hba;
+
+free_dump_mem:
+ bnx2i_release_free_cid_que(hba);
+cid_que_err:
+ bnx2i_free_mp_bdt(hba);
+mp_bdt_mem_err:
+ if (hba->regview) {
+ iounmap(hba->regview);
+ hba->regview = NULL;
+ }
+ioreg_map_err:
+ pci_dev_put(hba->pcidev);
+ scsi_host_put(shost);
+ return NULL;
+}
+
+/**
+ * bnx2i_free_hba- releases hba structure and resources held by the adapter
+ * @hba: pointer to adapter instance
+ *
+ * free adapter structure and call various cleanup routines.
+ */
+void bnx2i_free_hba(struct bnx2i_hba *hba)
+{
+ struct Scsi_Host *shost = hba->shost;
+
+ iscsi_host_remove(shost);
+ INIT_LIST_HEAD(&hba->ep_ofld_list);
+ INIT_LIST_HEAD(&hba->ep_destroy_list);
+ pci_dev_put(hba->pcidev);
+
+ if (hba->regview) {
+ iounmap(hba->regview);
+ hba->regview = NULL;
+ }
+ bnx2i_free_mp_bdt(hba);
+ bnx2i_release_free_cid_que(hba);
+ iscsi_host_free(shost);
+}
+
+/**
+ * bnx2i_conn_free_login_resources - free DMA resources used for login process
+ * @hba: pointer to adapter instance
+ * @bnx2i_conn: iscsi connection pointer
+ *
+ * Login related resources, mostly BDT & payload DMA memory is freed
+ */
+static void bnx2i_conn_free_login_resources(struct bnx2i_hba *hba,
+ struct bnx2i_conn *bnx2i_conn)
+{
+ if (bnx2i_conn->gen_pdu.resp_bd_tbl) {
+ dma_free_coherent(&hba->pcidev->dev, PAGE_SIZE,
+ bnx2i_conn->gen_pdu.resp_bd_tbl,
+ bnx2i_conn->gen_pdu.resp_bd_dma);
+ bnx2i_conn->gen_pdu.resp_bd_tbl = NULL;
+ }
+
+ if (bnx2i_conn->gen_pdu.req_bd_tbl) {
+ dma_free_coherent(&hba->pcidev->dev, PAGE_SIZE,
+ bnx2i_conn->gen_pdu.req_bd_tbl,
+ bnx2i_conn->gen_pdu.req_bd_dma);
+ bnx2i_conn->gen_pdu.req_bd_tbl = NULL;
+ }
+
+ if (bnx2i_conn->gen_pdu.resp_buf) {
+ dma_free_coherent(&hba->pcidev->dev,
+ ISCSI_DEF_MAX_RECV_SEG_LEN,
+ bnx2i_conn->gen_pdu.resp_buf,
+ bnx2i_conn->gen_pdu.resp_dma_addr);
+ bnx2i_conn->gen_pdu.resp_buf = NULL;
+ }
+
+ if (bnx2i_conn->gen_pdu.req_buf) {
+ dma_free_coherent(&hba->pcidev->dev,
+ ISCSI_DEF_MAX_RECV_SEG_LEN,
+ bnx2i_conn->gen_pdu.req_buf,
+ bnx2i_conn->gen_pdu.req_dma_addr);
+ bnx2i_conn->gen_pdu.req_buf = NULL;
+ }
+}
+
+/**
+ * bnx2i_conn_alloc_login_resources - alloc DMA resources for login/nop.
+ * @hba: pointer to adapter instance
+ * @bnx2i_conn: iscsi connection pointer
+ *
+ * Mgmt task DNA resources are allocated in this routine.
+ */
+static int bnx2i_conn_alloc_login_resources(struct bnx2i_hba *hba,
+ struct bnx2i_conn *bnx2i_conn)
+{
+ /* Allocate memory for login request/response buffers */
+ bnx2i_conn->gen_pdu.req_buf =
+ dma_alloc_coherent(&hba->pcidev->dev,
+ ISCSI_DEF_MAX_RECV_SEG_LEN,
+ &bnx2i_conn->gen_pdu.req_dma_addr,
+ GFP_KERNEL);
+ if (bnx2i_conn->gen_pdu.req_buf == NULL)
+ goto login_req_buf_failure;
+
+ bnx2i_conn->gen_pdu.req_buf_size = 0;
+ bnx2i_conn->gen_pdu.req_wr_ptr = bnx2i_conn->gen_pdu.req_buf;
+
+ bnx2i_conn->gen_pdu.resp_buf =
+ dma_alloc_coherent(&hba->pcidev->dev,
+ ISCSI_DEF_MAX_RECV_SEG_LEN,
+ &bnx2i_conn->gen_pdu.resp_dma_addr,
+ GFP_KERNEL);
+ if (bnx2i_conn->gen_pdu.resp_buf == NULL)
+ goto login_resp_buf_failure;
+
+ bnx2i_conn->gen_pdu.resp_buf_size = ISCSI_DEF_MAX_RECV_SEG_LEN;
+ bnx2i_conn->gen_pdu.resp_wr_ptr = bnx2i_conn->gen_pdu.resp_buf;
+
+ bnx2i_conn->gen_pdu.req_bd_tbl =
+ dma_alloc_coherent(&hba->pcidev->dev, PAGE_SIZE,
+ &bnx2i_conn->gen_pdu.req_bd_dma, GFP_KERNEL);
+ if (bnx2i_conn->gen_pdu.req_bd_tbl == NULL)
+ goto login_req_bd_tbl_failure;
+
+ bnx2i_conn->gen_pdu.resp_bd_tbl =
+ dma_alloc_coherent(&hba->pcidev->dev, PAGE_SIZE,
+ &bnx2i_conn->gen_pdu.resp_bd_dma,
+ GFP_KERNEL);
+ if (bnx2i_conn->gen_pdu.resp_bd_tbl == NULL)
+ goto login_resp_bd_tbl_failure;
+
+ return 0;
+
+login_resp_bd_tbl_failure:
+ dma_free_coherent(&hba->pcidev->dev, PAGE_SIZE,
+ bnx2i_conn->gen_pdu.req_bd_tbl,
+ bnx2i_conn->gen_pdu.req_bd_dma);
+ bnx2i_conn->gen_pdu.req_bd_tbl = NULL;
+
+login_req_bd_tbl_failure:
+ dma_free_coherent(&hba->pcidev->dev, ISCSI_DEF_MAX_RECV_SEG_LEN,
+ bnx2i_conn->gen_pdu.resp_buf,
+ bnx2i_conn->gen_pdu.resp_dma_addr);
+ bnx2i_conn->gen_pdu.resp_buf = NULL;
+login_resp_buf_failure:
+ dma_free_coherent(&hba->pcidev->dev, ISCSI_DEF_MAX_RECV_SEG_LEN,
+ bnx2i_conn->gen_pdu.req_buf,
+ bnx2i_conn->gen_pdu.req_dma_addr);
+ bnx2i_conn->gen_pdu.req_buf = NULL;
+login_req_buf_failure:
+ iscsi_conn_printk(KERN_ERR, bnx2i_conn->cls_conn->dd_data,
+ "login resource alloc failed!!\n");
+ return -ENOMEM;
+
+}
+
+
+/**
+ * bnx2i_iscsi_prep_generic_pdu_bd - prepares BD table.
+ * @bnx2i_conn: iscsi connection pointer
+ *
+ * Allocates buffers and BD tables before shipping requests to cnic
+ * for PDUs prepared by 'iscsid' daemon
+ */
+static void bnx2i_iscsi_prep_generic_pdu_bd(struct bnx2i_conn *bnx2i_conn)
+{
+ struct iscsi_bd *bd_tbl;
+
+ bd_tbl = (struct iscsi_bd *) bnx2i_conn->gen_pdu.req_bd_tbl;
+
+ bd_tbl->buffer_addr_hi =
+ (u32) ((u64) bnx2i_conn->gen_pdu.req_dma_addr >> 32);
+ bd_tbl->buffer_addr_lo = (u32) bnx2i_conn->gen_pdu.req_dma_addr;
+ bd_tbl->buffer_length = bnx2i_conn->gen_pdu.req_wr_ptr -
+ bnx2i_conn->gen_pdu.req_buf;
+ bd_tbl->reserved0 = 0;
+ bd_tbl->flags = ISCSI_BD_LAST_IN_BD_CHAIN |
+ ISCSI_BD_FIRST_IN_BD_CHAIN;
+
+ bd_tbl = (struct iscsi_bd *) bnx2i_conn->gen_pdu.resp_bd_tbl;
+ bd_tbl->buffer_addr_hi = (u64) bnx2i_conn->gen_pdu.resp_dma_addr >> 32;
+ bd_tbl->buffer_addr_lo = (u32) bnx2i_conn->gen_pdu.resp_dma_addr;
+ bd_tbl->buffer_length = ISCSI_DEF_MAX_RECV_SEG_LEN;
+ bd_tbl->reserved0 = 0;
+ bd_tbl->flags = ISCSI_BD_LAST_IN_BD_CHAIN |
+ ISCSI_BD_FIRST_IN_BD_CHAIN;
+}
+
+
+/**
+ * bnx2i_iscsi_send_generic_request - called to send mgmt tasks.
+ * @task: transport layer task pointer
+ *
+ * called to transmit PDUs prepared by the 'iscsid' daemon. iSCSI login,
+ * Nop-out and Logout requests flow through this path.
+ */
+static int bnx2i_iscsi_send_generic_request(struct iscsi_task *task)
+{
+ struct bnx2i_cmd *cmd = task->dd_data;
+ struct bnx2i_conn *bnx2i_conn = cmd->conn;
+ int rc = 0;
+ char *buf;
+ int data_len;
+
+ bnx2i_iscsi_prep_generic_pdu_bd(bnx2i_conn);
+ switch (task->hdr->opcode & ISCSI_OPCODE_MASK) {
+ case ISCSI_OP_LOGIN:
+ bnx2i_send_iscsi_login(bnx2i_conn, task);
+ break;
+ case ISCSI_OP_NOOP_OUT:
+ data_len = bnx2i_conn->gen_pdu.req_buf_size;
+ buf = bnx2i_conn->gen_pdu.req_buf;
+ if (data_len)
+ rc = bnx2i_send_iscsi_nopout(bnx2i_conn, task,
+ RESERVED_ITT,
+ buf, data_len, 1);
+ else
+ rc = bnx2i_send_iscsi_nopout(bnx2i_conn, task,
+ RESERVED_ITT,
+ NULL, 0, 1);
+ break;
+ case ISCSI_OP_LOGOUT:
+ rc = bnx2i_send_iscsi_logout(bnx2i_conn, task);
+ break;
+ case ISCSI_OP_SCSI_TMFUNC:
+ rc = bnx2i_send_iscsi_tmf(bnx2i_conn, task);
+ break;
+ default:
+ iscsi_conn_printk(KERN_ALERT, bnx2i_conn->cls_conn->dd_data,
+ "send_gen: unsupported op 0x%x\n",
+ task->hdr->opcode);
+ }
+ return rc;
+}
+
+
+/**********************************************************************
+ * SCSI-ML Interface
+ **********************************************************************/
+
+/**
+ * bnx2i_cpy_scsi_cdb - copies LUN & CDB fields in required format to sq wqe
+ * @sc: SCSI-ML command pointer
+ * @cmd: iscsi cmd pointer
+ */
+static void bnx2i_cpy_scsi_cdb(struct scsi_cmnd *sc, struct bnx2i_cmd *cmd)
+{
+ u32 dword;
+ int lpcnt;
+ u8 *srcp;
+ u32 *dstp;
+ u32 scsi_lun[2];
+
+ int_to_scsilun(sc->device->lun, (struct scsi_lun *) scsi_lun);
+ cmd->req.lun[0] = be32_to_cpu(scsi_lun[0]);
+ cmd->req.lun[1] = be32_to_cpu(scsi_lun[1]);
+
+ lpcnt = cmd->scsi_cmd->cmd_len / sizeof(dword);
+ srcp = (u8 *) sc->cmnd;
+ dstp = (u32 *) cmd->req.cdb;
+ while (lpcnt--) {
+ memcpy(&dword, (const void *) srcp, 4);
+ *dstp = cpu_to_be32(dword);
+ srcp += 4;
+ dstp++;
+ }
+ if (sc->cmd_len & 0x3) {
+ dword = (u32) srcp[0] | ((u32) srcp[1] << 8);
+ *dstp = cpu_to_be32(dword);
+ }
+}
+
+static void bnx2i_cleanup_task(struct iscsi_task *task)
+{
+ struct iscsi_conn *conn = task->conn;
+ struct bnx2i_conn *bnx2i_conn = conn->dd_data;
+ struct bnx2i_hba *hba = bnx2i_conn->hba;
+
+ /*
+ * mgmt task or cmd was never sent to us to transmit.
+ */
+ if (!task->sc || task->state == ISCSI_TASK_PENDING)
+ return;
+ /*
+ * need to clean-up task context to claim dma buffers
+ */
+ if (task->state == ISCSI_TASK_ABRT_TMF) {
+ bnx2i_send_cmd_cleanup_req(hba, task->dd_data);
+
+ spin_unlock_bh(&conn->session->lock);
+ wait_for_completion_timeout(&bnx2i_conn->cmd_cleanup_cmpl,
+ msecs_to_jiffies(ISCSI_CMD_CLEANUP_TIMEOUT));
+ spin_lock_bh(&conn->session->lock);
+ }
+ bnx2i_iscsi_unmap_sg_list(task->dd_data);
+}
+
+/**
+ * bnx2i_mtask_xmit - transmit mtask to chip for further processing
+ * @conn: transport layer conn structure pointer
+ * @task: transport layer command structure pointer
+ */
+static int
+bnx2i_mtask_xmit(struct iscsi_conn *conn, struct iscsi_task *task)
+{
+ struct bnx2i_conn *bnx2i_conn = conn->dd_data;
+ struct bnx2i_cmd *cmd = task->dd_data;
+
+ memset(bnx2i_conn->gen_pdu.req_buf, 0, ISCSI_DEF_MAX_RECV_SEG_LEN);
+
+ bnx2i_setup_cmd_wqe_template(cmd);
+ bnx2i_conn->gen_pdu.req_buf_size = task->data_count;
+ if (task->data_count) {
+ memcpy(bnx2i_conn->gen_pdu.req_buf, task->data,
+ task->data_count);
+ bnx2i_conn->gen_pdu.req_wr_ptr =
+ bnx2i_conn->gen_pdu.req_buf + task->data_count;
+ }
+ cmd->conn = conn->dd_data;
+ cmd->scsi_cmd = NULL;
+ return bnx2i_iscsi_send_generic_request(task);
+}
+
+/**
+ * bnx2i_task_xmit - transmit iscsi command to chip for further processing
+ * @task: transport layer command structure pointer
+ *
+ * maps SG buffers and send request to chip/firmware in the form of SQ WQE
+ */
+static int bnx2i_task_xmit(struct iscsi_task *task)
+{
+ struct iscsi_conn *conn = task->conn;
+ struct iscsi_session *session = conn->session;
+ struct Scsi_Host *shost = iscsi_session_to_shost(session->cls_session);
+ struct bnx2i_hba *hba = iscsi_host_priv(shost);
+ struct bnx2i_conn *bnx2i_conn = conn->dd_data;
+ struct scsi_cmnd *sc = task->sc;
+ struct bnx2i_cmd *cmd = task->dd_data;
+ struct iscsi_cmd *hdr = (struct iscsi_cmd *) task->hdr;
+
+ if (test_bit(ADAPTER_STATE_LINK_DOWN, &hba->adapter_state))
+ return -ENOTCONN;
+
+ if (!bnx2i_conn->is_bound)
+ return -ENOTCONN;
+
+ /*
+ * If there is no scsi_cmnd this must be a mgmt task
+ */
+ if (!sc)
+ return bnx2i_mtask_xmit(conn, task);
+
+ bnx2i_setup_cmd_wqe_template(cmd);
+ cmd->req.op_code = ISCSI_OP_SCSI_CMD;
+ cmd->conn = bnx2i_conn;
+ cmd->scsi_cmd = sc;
+ cmd->req.total_data_transfer_length = scsi_bufflen(sc);
+ cmd->req.cmd_sn = be32_to_cpu(hdr->cmdsn);
+
+ bnx2i_iscsi_map_sg_list(cmd);
+ bnx2i_cpy_scsi_cdb(sc, cmd);
+
+ cmd->req.op_attr = ISCSI_ATTR_SIMPLE;
+ if (sc->sc_data_direction == DMA_TO_DEVICE) {
+ cmd->req.op_attr |= ISCSI_CMD_REQUEST_WRITE;
+ cmd->req.itt = task->itt |
+ (ISCSI_TASK_TYPE_WRITE << ISCSI_CMD_REQUEST_TYPE_SHIFT);
+ bnx2i_setup_write_cmd_bd_info(task);
+ } else {
+ if (scsi_bufflen(sc))
+ cmd->req.op_attr |= ISCSI_CMD_REQUEST_READ;
+ cmd->req.itt = task->itt |
+ (ISCSI_TASK_TYPE_READ << ISCSI_CMD_REQUEST_TYPE_SHIFT);
+ }
+
+ cmd->req.num_bds = cmd->io_tbl.bd_valid;
+ if (!cmd->io_tbl.bd_valid) {
+ cmd->req.bd_list_addr_lo = (u32) hba->mp_bd_dma;
+ cmd->req.bd_list_addr_hi = (u32) ((u64) hba->mp_bd_dma >> 32);
+ cmd->req.num_bds = 1;
+ }
+
+ bnx2i_send_iscsi_scsicmd(bnx2i_conn, cmd);
+ return 0;
+}
+
+/**
+ * bnx2i_session_create - create a new iscsi session
+ * @cmds_max: max commands supported
+ * @qdepth: scsi queue depth to support
+ * @initial_cmdsn: initial iscsi CMDSN to be used for this session
+ *
+ * Creates a new iSCSI session instance on given device.
+ */
+static struct iscsi_cls_session *
+bnx2i_session_create(struct iscsi_endpoint *ep,
+ uint16_t cmds_max, uint16_t qdepth,
+ uint32_t initial_cmdsn)
+{
+ struct Scsi_Host *shost;
+ struct iscsi_cls_session *cls_session;
+ struct bnx2i_hba *hba;
+ struct bnx2i_endpoint *bnx2i_ep;
+
+ if (!ep) {
+ printk(KERN_ERR "bnx2i: missing ep.\n");
+ return NULL;
+ }
+
+ bnx2i_ep = ep->dd_data;
+ shost = bnx2i_ep->hba->shost;
+ hba = iscsi_host_priv(shost);
+ if (bnx2i_adapter_ready(hba))
+ return NULL;
+
+ /*
+ * user can override hw limit as long as it is within
+ * the min/max.
+ */
+ if (cmds_max > hba->max_sqes)
+ cmds_max = hba->max_sqes;
+ else if (cmds_max < BNX2I_SQ_WQES_MIN)
+ cmds_max = BNX2I_SQ_WQES_MIN;
+
+ cls_session = iscsi_session_setup(&bnx2i_iscsi_transport, shost,
+ cmds_max, sizeof(struct bnx2i_cmd),
+ initial_cmdsn, ISCSI_MAX_TARGET);
+ if (!cls_session)
+ return NULL;
+
+ if (bnx2i_setup_cmd_pool(hba, cls_session->dd_data))
+ goto session_teardown;
+ return cls_session;
+
+session_teardown:
+ iscsi_session_teardown(cls_session);
+ return NULL;
+}
+
+
+/**
+ * bnx2i_session_destroy - destroys iscsi session
+ * @cls_session: pointer to iscsi cls session
+ *
+ * Destroys previously created iSCSI session instance and releases
+ * all resources held by it
+ */
+static void bnx2i_session_destroy(struct iscsi_cls_session *cls_session)
+{
+ struct iscsi_session *session = cls_session->dd_data;
+ struct Scsi_Host *shost = iscsi_session_to_shost(cls_session);
+ struct bnx2i_hba *hba = iscsi_host_priv(shost);
+
+ bnx2i_destroy_cmd_pool(hba, session);
+ iscsi_session_teardown(cls_session);
+}
+
+
+/**
+ * bnx2i_conn_create - create iscsi connection instance
+ * @cls_session: pointer to iscsi cls session
+ * @cid: iscsi cid as per rfc (not NX2's CID terminology)
+ *
+ * Creates a new iSCSI connection instance for a given session
+ */
+static struct iscsi_cls_conn *
+bnx2i_conn_create(struct iscsi_cls_session *cls_session, uint32_t cid)
+{
+ struct Scsi_Host *shost = iscsi_session_to_shost(cls_session);
+ struct bnx2i_hba *hba = iscsi_host_priv(shost);
+ struct bnx2i_conn *bnx2i_conn;
+ struct iscsi_cls_conn *cls_conn;
+ struct iscsi_conn *conn;
+
+ cls_conn = iscsi_conn_setup(cls_session, sizeof(*bnx2i_conn),
+ cid);
+ if (!cls_conn)
+ return NULL;
+ conn = cls_conn->dd_data;
+
+ bnx2i_conn = conn->dd_data;
+ bnx2i_conn->cls_conn = cls_conn;
+ bnx2i_conn->hba = hba;
+ /* 'ep' ptr will be assigned in bind() call */
+ bnx2i_conn->ep = NULL;
+ init_completion(&bnx2i_conn->cmd_cleanup_cmpl);
+
+ if (bnx2i_conn_alloc_login_resources(hba, bnx2i_conn)) {
+ iscsi_conn_printk(KERN_ALERT, conn,
+ "conn_new: login resc alloc failed!!\n");
+ goto free_conn;
+ }
+
+ return cls_conn;
+
+free_conn:
+ iscsi_conn_teardown(cls_conn);
+ return NULL;
+}
+
+/**
+ * bnx2i_conn_bind - binds iscsi sess, conn and ep objects together
+ * @cls_session: pointer to iscsi cls session
+ * @cls_conn: pointer to iscsi cls conn
+ * @transport_fd: 64-bit EP handle
+ * @is_leading: leading connection on this session?
+ *
+ * Binds together iSCSI session instance, iSCSI connection instance
+ * and the TCP connection. This routine returns error code if
+ * TCP connection does not belong on the device iSCSI sess/conn
+ * is bound
+ */
+static int bnx2i_conn_bind(struct iscsi_cls_session *cls_session,
+ struct iscsi_cls_conn *cls_conn,
+ uint64_t transport_fd, int is_leading)
+{
+ struct iscsi_conn *conn = cls_conn->dd_data;
+ struct bnx2i_conn *bnx2i_conn = conn->dd_data;
+ struct Scsi_Host *shost = iscsi_session_to_shost(cls_session);
+ struct bnx2i_hba *hba = iscsi_host_priv(shost);
+ struct bnx2i_endpoint *bnx2i_ep;
+ struct iscsi_endpoint *ep;
+ int ret_code;
+
+ ep = iscsi_lookup_endpoint(transport_fd);
+ if (!ep)
+ return -EINVAL;
+
+ bnx2i_ep = ep->dd_data;
+ if ((bnx2i_ep->state == EP_STATE_TCP_FIN_RCVD) ||
+ (bnx2i_ep->state == EP_STATE_TCP_RST_RCVD))
+ /* Peer disconnect via' FIN or RST */
+ return -EINVAL;
+
+ if (iscsi_conn_bind(cls_session, cls_conn, is_leading))
+ return -EINVAL;
+
+ if (bnx2i_ep->hba != hba) {
+ /* Error - TCP connection does not belong to this device
+ */
+ iscsi_conn_printk(KERN_ALERT, cls_conn->dd_data,
+ "conn bind, ep=0x%p (%s) does not",
+ bnx2i_ep, bnx2i_ep->hba->netdev->name);
+ iscsi_conn_printk(KERN_ALERT, cls_conn->dd_data,
+ "belong to hba (%s)\n",
+ hba->netdev->name);
+ return -EEXIST;
+ }
+
+ bnx2i_ep->conn = bnx2i_conn;
+ bnx2i_conn->ep = bnx2i_ep;
+ bnx2i_conn->iscsi_conn_cid = bnx2i_ep->ep_iscsi_cid;
+ bnx2i_conn->fw_cid = bnx2i_ep->ep_cid;
+ bnx2i_conn->is_bound = 1;
+
+ ret_code = bnx2i_bind_conn_to_iscsi_cid(hba, bnx2i_conn,
+ bnx2i_ep->ep_iscsi_cid);
+
+ /* 5706/5708/5709 FW takes RQ as full when initiated, but for 57710
+ * driver needs to explicitly replenish RQ index during setup.
+ */
+ if (test_bit(BNX2I_NX2_DEV_57710, &bnx2i_ep->hba->cnic_dev_type))
+ bnx2i_put_rq_buf(bnx2i_conn, 0);
+
+ bnx2i_arm_cq_event_coalescing(bnx2i_conn->ep, CNIC_ARM_CQE);
+ return ret_code;
+}
+
+
+/**
+ * bnx2i_conn_destroy - destroy iscsi connection instance & release resources
+ * @cls_conn: pointer to iscsi cls conn
+ *
+ * Destroy an iSCSI connection instance and release memory resources held by
+ * this connection
+ */
+static void bnx2i_conn_destroy(struct iscsi_cls_conn *cls_conn)
+{
+ struct iscsi_conn *conn = cls_conn->dd_data;
+ struct bnx2i_conn *bnx2i_conn = conn->dd_data;
+ struct Scsi_Host *shost;
+ struct bnx2i_hba *hba;
+
+ shost = iscsi_session_to_shost(iscsi_conn_to_session(cls_conn));
+ hba = iscsi_host_priv(shost);
+
+ bnx2i_conn_free_login_resources(hba, bnx2i_conn);
+ iscsi_conn_teardown(cls_conn);
+}
+
+
+/**
+ * bnx2i_conn_get_param - return iscsi connection parameter to caller
+ * @cls_conn: pointer to iscsi cls conn
+ * @param: parameter type identifier
+ * @buf: buffer pointer
+ *
+ * returns iSCSI connection parameters
+ */
+static int bnx2i_conn_get_param(struct iscsi_cls_conn *cls_conn,
+ enum iscsi_param param, char *buf)
+{
+ struct iscsi_conn *conn = cls_conn->dd_data;
+ struct bnx2i_conn *bnx2i_conn = conn->dd_data;
+ int len = 0;
+
+ switch (param) {
+ case ISCSI_PARAM_CONN_PORT:
+ if (bnx2i_conn->ep)
+ len = sprintf(buf, "%hu\n",
+ bnx2i_conn->ep->cm_sk->dst_port);
+ break;
+ case ISCSI_PARAM_CONN_ADDRESS:
+ if (bnx2i_conn->ep)
+ len = sprintf(buf, NIPQUAD_FMT "\n",
+ NIPQUAD(bnx2i_conn->ep->cm_sk->dst_ip));
+ break;
+ default:
+ return iscsi_conn_get_param(cls_conn, param, buf);
+ }
+
+ return len;
+}
+
+/**
+ * bnx2i_host_get_param - returns host (adapter) related parameters
+ * @shost: scsi host pointer
+ * @param: parameter type identifier
+ * @buf: buffer pointer
+ */
+static int bnx2i_host_get_param(struct Scsi_Host *shost,
+ enum iscsi_host_param param, char *buf)
+{
+ struct bnx2i_hba *hba = iscsi_host_priv(shost);
+ int len = 0;
+
+ switch (param) {
+ case ISCSI_HOST_PARAM_HWADDRESS:
+ len = sysfs_format_mac(buf, hba->cnic->mac_addr, 6);
+ break;
+ case ISCSI_HOST_PARAM_NETDEV_NAME:
+ len = sprintf(buf, "%s\n", hba->netdev->name);
+ break;
+ default:
+ return iscsi_host_get_param(shost, param, buf);
+ }
+ return len;
+}
+
+/**
+ * bnx2i_conn_start - completes iscsi connection migration to FFP
+ * @cls_conn: pointer to iscsi cls conn
+ *
+ * last call in FFP migration to handover iscsi conn to the driver
+ */
+static int bnx2i_conn_start(struct iscsi_cls_conn *cls_conn)
+{
+ struct iscsi_conn *conn = cls_conn->dd_data;
+ struct bnx2i_conn *bnx2i_conn = conn->dd_data;
+
+ bnx2i_conn->ep->state = EP_STATE_ULP_UPDATE_START;
+ bnx2i_update_iscsi_conn(conn);
+
+ /*
+ * this should normally not sleep for a long time so it should
+ * not disrupt the caller.
+ */
+ bnx2i_conn->ep->ofld_timer.expires = 1 * HZ + jiffies;
+ bnx2i_conn->ep->ofld_timer.function = bnx2i_ep_ofld_timer;
+ bnx2i_conn->ep->ofld_timer.data = (unsigned long) bnx2i_conn->ep;
+ add_timer(&bnx2i_conn->ep->ofld_timer);
+ /* update iSCSI context for this conn, wait for CNIC to complete */
+ wait_event_interruptible(bnx2i_conn->ep->ofld_wait,
+ bnx2i_conn->ep->state != EP_STATE_ULP_UPDATE_START);
+
+ if (signal_pending(current))
+ flush_signals(current);
+ del_timer_sync(&bnx2i_conn->ep->ofld_timer);
+
+ iscsi_conn_start(cls_conn);
+ return 0;
+}
+
+
+/**
+ * bnx2i_conn_get_stats - returns iSCSI stats
+ * @cls_conn: pointer to iscsi cls conn
+ * @stats: pointer to iscsi statistic struct
+ */
+static void bnx2i_conn_get_stats(struct iscsi_cls_conn *cls_conn,
+ struct iscsi_stats *stats)
+{
+ struct iscsi_conn *conn = cls_conn->dd_data;
+
+ stats->txdata_octets = conn->txdata_octets;
+ stats->rxdata_octets = conn->rxdata_octets;
+ stats->scsicmd_pdus = conn->scsicmd_pdus_cnt;
+ stats->dataout_pdus = conn->dataout_pdus_cnt;
+ stats->scsirsp_pdus = conn->scsirsp_pdus_cnt;
+ stats->datain_pdus = conn->datain_pdus_cnt;
+ stats->r2t_pdus = conn->r2t_pdus_cnt;
+ stats->tmfcmd_pdus = conn->tmfcmd_pdus_cnt;
+ stats->tmfrsp_pdus = conn->tmfrsp_pdus_cnt;
+ stats->custom_length = 3;
+ strcpy(stats->custom[2].desc, "eh_abort_cnt");
+ stats->custom[2].value = conn->eh_abort_cnt;
+ stats->digest_err = 0;
+ stats->timeout_err = 0;
+ stats->custom_length = 0;
+}
+
+
+/**
+ * bnx2i_check_route - checks if target IP route belongs to one of NX2 devices
+ * @dst_addr: target IP address
+ *
+ * check if route resolves to BNX2 device
+ */
+static struct bnx2i_hba *bnx2i_check_route(struct sockaddr *dst_addr)
+{
+ struct sockaddr_in *desti = (struct sockaddr_in *) dst_addr;
+ struct bnx2i_hba *hba;
+ struct cnic_dev *cnic = NULL;
+
+ bnx2i_reg_dev_all();
+
+ hba = get_adapter_list_head();
+ if (hba && hba->cnic)
+ cnic = hba->cnic->cm_select_dev(desti, CNIC_ULP_ISCSI);
+ if (!cnic) {
+ printk(KERN_ALERT "bnx2i: no route,"
+ "can't connect using cnic\n");
+ goto no_nx2_route;
+ }
+ hba = bnx2i_find_hba_for_cnic(cnic);
+ if (!hba)
+ goto no_nx2_route;
+
+ if (bnx2i_adapter_ready(hba)) {
+ printk(KERN_ALERT "bnx2i: check route, hba not found\n");
+ goto no_nx2_route;
+ }
+ if (hba->netdev->mtu > hba->mtu_supported) {
+ printk(KERN_ALERT "bnx2i: %s network i/f mtu is set to %d\n",
+ hba->netdev->name, hba->netdev->mtu);
+ printk(KERN_ALERT "bnx2i: iSCSI HBA can support mtu of %d\n",
+ hba->mtu_supported);
+ goto no_nx2_route;
+ }
+ return hba;
+no_nx2_route:
+ return NULL;
+}
+
+
+/**
+ * bnx2i_tear_down_conn - tear down iscsi/tcp connection and free resources
+ * @hba: pointer to adapter instance
+ * @ep: endpoint (transport indentifier) structure
+ *
+ * destroys cm_sock structure and on chip iscsi context
+ */
+static int bnx2i_tear_down_conn(struct bnx2i_hba *hba,
+ struct bnx2i_endpoint *ep)
+{
+ if (test_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic))
+ hba->cnic->cm_destroy(ep->cm_sk);
+
+ if (test_bit(ADAPTER_STATE_GOING_DOWN, &ep->hba->adapter_state))
+ ep->state = EP_STATE_DISCONN_COMPL;
+
+ if (test_bit(BNX2I_NX2_DEV_57710, &hba->cnic_dev_type) &&
+ ep->state == EP_STATE_DISCONN_TIMEDOUT) {
+ printk(KERN_ALERT "bnx2i - ERROR - please submit GRC Dump,"
+ " NW/PCIe trace, driver msgs to developers"
+ " for analysis\n");
+ return 1;
+ }
+
+ ep->state = EP_STATE_CLEANUP_START;
+ init_timer(&ep->ofld_timer);
+ ep->ofld_timer.expires = 10*HZ + jiffies;
+ ep->ofld_timer.function = bnx2i_ep_ofld_timer;
+ ep->ofld_timer.data = (unsigned long) ep;
+ add_timer(&ep->ofld_timer);
+
+ bnx2i_ep_destroy_list_add(hba, ep);
+
+ /* destroy iSCSI context, wait for it to complete */
+ bnx2i_send_conn_destroy(hba, ep);
+ wait_event_interruptible(ep->ofld_wait,
+ (ep->state != EP_STATE_CLEANUP_START));
+
+ if (signal_pending(current))
+ flush_signals(current);
+ del_timer_sync(&ep->ofld_timer);
+
+ bnx2i_ep_destroy_list_del(hba, ep);
+
+ if (ep->state != EP_STATE_CLEANUP_CMPL)
+ /* should never happen */
+ printk(KERN_ALERT "bnx2i - conn destroy failed\n");
+
+ return 0;
+}
+
+
+/**
+ * bnx2i_ep_connect - establish TCP connection to target portal
+ * @shost: scsi host
+ * @dst_addr: target IP address
+ * @non_blocking: blocking or non-blocking call
+ *
+ * this routine initiates the TCP/IP connection by invoking Option-2 i/f
+ * with l5_core and the CNIC. This is a multi-step process of resolving
+ * route to target, create a iscsi connection context, handshaking with
+ * CNIC module to create/initialize the socket struct and finally
+ * sending down option-2 request to complete TCP 3-way handshake
+ */
+static struct iscsi_endpoint *bnx2i_ep_connect(struct Scsi_Host *shost,
+ struct sockaddr *dst_addr,
+ int non_blocking)
+{
+ u32 iscsi_cid = BNX2I_CID_RESERVED;
+ struct sockaddr_in *desti = (struct sockaddr_in *) dst_addr;
+ struct sockaddr_in6 *desti6;
+ struct bnx2i_endpoint *bnx2i_ep;
+ struct bnx2i_hba *hba;
+ struct cnic_dev *cnic;
+ struct cnic_sockaddr saddr;
+ struct iscsi_endpoint *ep;
+ int rc = 0;
+
+ if (shost)
+ /* driver is given scsi host to work with */
+ hba = iscsi_host_priv(shost);
+ else
+ /*
+ * check if the given destination can be reached through
+ * a iscsi capable NetXtreme2 device
+ */
+ hba = bnx2i_check_route(dst_addr);
+ if (!hba) {
+ rc = -ENOMEM;
+ goto check_busy;
+ }
+
+ cnic = hba->cnic;
+ ep = bnx2i_alloc_ep(hba);
+ if (!ep) {
+ rc = -ENOMEM;
+ goto check_busy;
+ }
+ bnx2i_ep = ep->dd_data;
+
+ mutex_lock(&hba->net_dev_lock);
+ if (bnx2i_adapter_ready(hba)) {
+ rc = -EPERM;
+ goto net_if_down;
+ }
+
+ bnx2i_ep->state = EP_STATE_IDLE;
+ bnx2i_ep->ep_iscsi_cid = (u16) -1;
+ bnx2i_ep->num_active_cmds = 0;
+ iscsi_cid = bnx2i_alloc_iscsi_cid(hba);
+ if (iscsi_cid == -1) {
+ printk(KERN_ALERT "alloc_ep: unable to allocate iscsi cid\n");
+ rc = -ENOMEM;
+ goto iscsi_cid_err;
+ }
+ bnx2i_ep->hba_age = hba->age;
+
+ rc = bnx2i_alloc_qp_resc(hba, bnx2i_ep);
+ if (rc != 0) {
+ printk(KERN_ALERT "bnx2i: ep_conn, alloc QP resc error\n");
+ rc = -ENOMEM;
+ goto qp_resc_err;
+ }
+
+ bnx2i_ep->ep_iscsi_cid = (u16)iscsi_cid;
+ bnx2i_ep->state = EP_STATE_OFLD_START;
+ bnx2i_ep_ofld_list_add(hba, bnx2i_ep);
+
+ init_timer(&bnx2i_ep->ofld_timer);
+ bnx2i_ep->ofld_timer.expires = 2 * HZ + jiffies;
+ bnx2i_ep->ofld_timer.function = bnx2i_ep_ofld_timer;
+ bnx2i_ep->ofld_timer.data = (unsigned long) bnx2i_ep;
+ add_timer(&bnx2i_ep->ofld_timer);
+
+ bnx2i_send_conn_ofld_req(hba, bnx2i_ep);
+
+ /* Wait for CNIC hardware to setup conn context and return 'cid' */
+ wait_event_interruptible(bnx2i_ep->ofld_wait,
+ bnx2i_ep->state != EP_STATE_OFLD_START);
+
+ if (signal_pending(current))
+ flush_signals(current);
+ del_timer_sync(&bnx2i_ep->ofld_timer);
+
+ bnx2i_ep_ofld_list_del(hba, bnx2i_ep);
+
+ if (bnx2i_ep->state != EP_STATE_OFLD_COMPL) {
+ rc = -ENOSPC;
+ goto conn_failed;
+ }
+
+ rc = cnic->cm_create(cnic, CNIC_ULP_ISCSI, bnx2i_ep->ep_cid,
+ iscsi_cid, &bnx2i_ep->cm_sk, bnx2i_ep);
+ if (rc) {
+ rc = -EINVAL;
+ goto conn_failed;
+ }
+
+ bnx2i_ep->cm_sk->rcv_buf = 256 * 1024;
+ bnx2i_ep->cm_sk->snd_buf = 256 * 1024;
+ clear_bit(SK_TCP_TIMESTAMP, &bnx2i_ep->cm_sk->tcp_flags);
+
+ memset(&saddr, 0, sizeof(saddr));
+ if (dst_addr->sa_family == AF_INET) {
+ desti = (struct sockaddr_in *) dst_addr;
+ saddr.remote.v4 = *desti;
+ saddr.local.v4.sin_family = desti->sin_family;
+ } else if (dst_addr->sa_family == AF_INET6) {
+ desti6 = (struct sockaddr_in6 *) dst_addr;
+ saddr.remote.v6 = *desti6;
+ saddr.local.v6.sin6_family = desti6->sin6_family;
+ }
+
+ bnx2i_ep->timestamp = jiffies;
+ bnx2i_ep->state = EP_STATE_CONNECT_START;
+ if (!test_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic)) {
+ rc = -EINVAL;
+ goto conn_failed;
+ } else
+ rc = cnic->cm_connect(bnx2i_ep->cm_sk, &saddr);
+
+ if (rc)
+ goto release_ep;
+
+ if (bnx2i_map_ep_dbell_regs(bnx2i_ep))
+ goto release_ep;
+ mutex_unlock(&hba->net_dev_lock);
+ return ep;
+
+release_ep:
+ if (bnx2i_tear_down_conn(hba, bnx2i_ep)) {
+ mutex_unlock(&hba->net_dev_lock);
+ return ERR_PTR(rc);
+ }
+conn_failed:
+net_if_down:
+iscsi_cid_err:
+ bnx2i_free_qp_resc(hba, bnx2i_ep);
+qp_resc_err:
+ bnx2i_free_ep(ep);
+ mutex_unlock(&hba->net_dev_lock);
+check_busy:
+ bnx2i_unreg_dev_all();
+ return ERR_PTR(rc);
+}
+
+
+/**
+ * bnx2i_ep_poll - polls for TCP connection establishement
+ * @ep: TCP connection (endpoint) handle
+ * @timeout_ms: timeout value in milli secs
+ *
+ * polls for TCP connect request to complete
+ */
+static int bnx2i_ep_poll(struct iscsi_endpoint *ep, int timeout_ms)
+{
+ struct bnx2i_endpoint *bnx2i_ep;
+ int rc = 0;
+
+ bnx2i_ep = ep->dd_data;
+ if ((bnx2i_ep->state == EP_STATE_IDLE) ||
+ (bnx2i_ep->state == EP_STATE_CONNECT_FAILED) ||
+ (bnx2i_ep->state == EP_STATE_OFLD_FAILED))
+ return -1;
+ if (bnx2i_ep->state == EP_STATE_CONNECT_COMPL)
+ return 1;
+
+ rc = wait_event_interruptible_timeout(bnx2i_ep->ofld_wait,
+ ((bnx2i_ep->state ==
+ EP_STATE_OFLD_FAILED) ||
+ (bnx2i_ep->state ==
+ EP_STATE_CONNECT_FAILED) ||
+ (bnx2i_ep->state ==
+ EP_STATE_CONNECT_COMPL)),
+ msecs_to_jiffies(timeout_ms));
+ if (!rc || (bnx2i_ep->state == EP_STATE_OFLD_FAILED))
+ rc = -1;
+
+ if (rc > 0)
+ return 1;
+ else if (!rc)
+ return 0; /* timeout */
+ else
+ return rc;
+}
+
+
+/**
+ * bnx2i_ep_tcp_conn_active - check EP state transition
+ * @ep: endpoint pointer
+ *
+ * check if underlying TCP connection is active
+ */
+static int bnx2i_ep_tcp_conn_active(struct bnx2i_endpoint *bnx2i_ep)
+{
+ int ret;
+ int cnic_dev_10g = 0;
+
+ if (test_bit(BNX2I_NX2_DEV_57710, &bnx2i_ep->hba->cnic_dev_type))
+ cnic_dev_10g = 1;
+
+ switch (bnx2i_ep->state) {
+ case EP_STATE_CONNECT_START:
+ case EP_STATE_CLEANUP_FAILED:
+ case EP_STATE_OFLD_FAILED:
+ case EP_STATE_DISCONN_TIMEDOUT:
+ ret = 0;
+ break;
+ case EP_STATE_CONNECT_COMPL:
+ case EP_STATE_ULP_UPDATE_START:
+ case EP_STATE_ULP_UPDATE_COMPL:
+ case EP_STATE_TCP_FIN_RCVD:
+ case EP_STATE_ULP_UPDATE_FAILED:
+ ret = 1;
+ break;
+ case EP_STATE_TCP_RST_RCVD:
+ ret = 0;
+ break;
+ case EP_STATE_CONNECT_FAILED:
+ if (cnic_dev_10g)
+ ret = 1;
+ else
+ ret = 0;
+ break;
+ default:
+ ret = 0;
+ }
+
+ return ret;
+}
+
+
+/**
+ * bnx2i_ep_disconnect - executes TCP connection teardown process
+ * @ep: TCP connection (endpoint) handle
+ *
+ * executes TCP connection teardown process
+ */
+static void bnx2i_ep_disconnect(struct iscsi_endpoint *ep)
+{
+ struct bnx2i_endpoint *bnx2i_ep;
+ struct bnx2i_conn *bnx2i_conn = NULL;
+ struct iscsi_session *session = NULL;
+ struct iscsi_conn *conn;
+ struct cnic_dev *cnic;
+ struct bnx2i_hba *hba;
+
+ bnx2i_ep = ep->dd_data;
+
+ /* driver should not attempt connection cleanup untill TCP_CONNECT
+ * completes either successfully or fails. Timeout is 9-secs, so
+ * wait for it to complete
+ */
+ while ((bnx2i_ep->state == EP_STATE_CONNECT_START) &&
+ !time_after(jiffies, bnx2i_ep->timestamp + (12 * HZ)))
+ msleep(250);
+
+ if (bnx2i_ep->conn) {
+ bnx2i_conn = bnx2i_ep->conn;
+ conn = bnx2i_conn->cls_conn->dd_data;
+ session = conn->session;
+
+ spin_lock_bh(&session->lock);
+ bnx2i_conn->is_bound = 0;
+ spin_unlock_bh(&session->lock);
+ }
+
+ hba = bnx2i_ep->hba;
+ if (bnx2i_ep->state == EP_STATE_IDLE)
+ goto return_bnx2i_ep;
+ cnic = hba->cnic;
+
+ mutex_lock(&hba->net_dev_lock);
+
+ if (!test_bit(ADAPTER_STATE_UP, &hba->adapter_state))
+ goto free_resc;
+ if (bnx2i_ep->hba_age != hba->age)
+ goto free_resc;
+
+ if (!bnx2i_ep_tcp_conn_active(bnx2i_ep))
+ goto destory_conn;
+
+ bnx2i_ep->state = EP_STATE_DISCONN_START;
+
+ init_timer(&bnx2i_ep->ofld_timer);
+ bnx2i_ep->ofld_timer.expires = 10*HZ + jiffies;
+ bnx2i_ep->ofld_timer.function = bnx2i_ep_ofld_timer;
+ bnx2i_ep->ofld_timer.data = (unsigned long) bnx2i_ep;
+ add_timer(&bnx2i_ep->ofld_timer);
+
+ if (test_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic)) {
+ int close = 0;
+
+ if (session) {
+ spin_lock_bh(&session->lock);
+ if (session->state == ISCSI_STATE_LOGGING_OUT)
+ close = 1;
+ spin_unlock_bh(&session->lock);
+ }
+ if (close)
+ cnic->cm_close(bnx2i_ep->cm_sk);
+ else
+ cnic->cm_abort(bnx2i_ep->cm_sk);
+ } else
+ goto free_resc;
+
+ /* wait for option-2 conn teardown */
+ wait_event_interruptible(bnx2i_ep->ofld_wait,
+ bnx2i_ep->state != EP_STATE_DISCONN_START);
+
+ if (signal_pending(current))
+ flush_signals(current);
+ del_timer_sync(&bnx2i_ep->ofld_timer);
+
+destory_conn:
+ if (bnx2i_tear_down_conn(hba, bnx2i_ep)) {
+ mutex_unlock(&hba->net_dev_lock);
+ return;
+ }
+free_resc:
+ mutex_unlock(&hba->net_dev_lock);
+ bnx2i_free_qp_resc(hba, bnx2i_ep);
+return_bnx2i_ep:
+ if (bnx2i_conn)
+ bnx2i_conn->ep = NULL;
+
+ bnx2i_free_ep(ep);
+
+ if (!hba->ofld_conns_active)
+ bnx2i_unreg_dev_all();
+}
+
+
+/**
+ * bnx2i_nl_set_path - ISCSI_UEVENT_PATH_UPDATE user message handler
+ * @buf: pointer to buffer containing iscsi path message
+ *
+ */
+static int bnx2i_nl_set_path(struct Scsi_Host *shost, struct iscsi_path *params)
+{
+ struct bnx2i_hba *hba = iscsi_host_priv(shost);
+ char *buf = (char *) params;
+ u16 len = sizeof(*params);
+
+ /* handled by cnic driver */
+ hba->cnic->iscsi_nl_msg_recv(hba->cnic, ISCSI_UEVENT_PATH_UPDATE, buf,
+ len);
+
+ return 0;
+}
+
+
+/*
+ * 'Scsi_Host_Template' structure and 'iscsi_tranport' structure template
+ * used while registering with the scsi host and iSCSI transport module.
+ */
+static struct scsi_host_template bnx2i_host_template = {
+ .module = THIS_MODULE,
+ .name = "Broadcom Offload iSCSI Initiator",
+ .proc_name = "bnx2i",
+ .queuecommand = iscsi_queuecommand,
+ .eh_abort_handler = iscsi_eh_abort,
+ .eh_device_reset_handler = iscsi_eh_device_reset,
+ .eh_target_reset_handler = iscsi_eh_target_reset,
+ .can_queue = 1024,
+ .max_sectors = 127,
+ .cmd_per_lun = 32,
+ .this_id = -1,
+ .use_clustering = ENABLE_CLUSTERING,
+ .sg_tablesize = ISCSI_MAX_BDS_PER_CMD,
+ .shost_attrs = bnx2i_dev_attributes,
+};
+
+struct iscsi_transport bnx2i_iscsi_transport = {
+ .owner = THIS_MODULE,
+ .name = "bnx2i",
+ .caps = CAP_RECOVERY_L0 | CAP_HDRDGST |
+ CAP_MULTI_R2T | CAP_DATADGST |
+ CAP_DATA_PATH_OFFLOAD,
+ .param_mask = ISCSI_MAX_RECV_DLENGTH |
+ ISCSI_MAX_XMIT_DLENGTH |
+ ISCSI_HDRDGST_EN |
+ ISCSI_DATADGST_EN |
+ ISCSI_INITIAL_R2T_EN |
+ ISCSI_MAX_R2T |
+ ISCSI_IMM_DATA_EN |
+ ISCSI_FIRST_BURST |
+ ISCSI_MAX_BURST |
+ ISCSI_PDU_INORDER_EN |
+ ISCSI_DATASEQ_INORDER_EN |
+ ISCSI_ERL |
+ ISCSI_CONN_PORT |
+ ISCSI_CONN_ADDRESS |
+ ISCSI_EXP_STATSN |
+ ISCSI_PERSISTENT_PORT |
+ ISCSI_PERSISTENT_ADDRESS |
+ ISCSI_TARGET_NAME | ISCSI_TPGT |
+ ISCSI_USERNAME | ISCSI_PASSWORD |
+ ISCSI_USERNAME_IN | ISCSI_PASSWORD_IN |
+ ISCSI_FAST_ABORT | ISCSI_ABORT_TMO |
+ ISCSI_LU_RESET_TMO |
+ ISCSI_PING_TMO | ISCSI_RECV_TMO |
+ ISCSI_IFACE_NAME | ISCSI_INITIATOR_NAME,
+ .host_param_mask = ISCSI_HOST_HWADDRESS | ISCSI_HOST_NETDEV_NAME,
+ .create_session = bnx2i_session_create,
+ .destroy_session = bnx2i_session_destroy,
+ .create_conn = bnx2i_conn_create,
+ .bind_conn = bnx2i_conn_bind,
+ .destroy_conn = bnx2i_conn_destroy,
+ .set_param = iscsi_set_param,
+ .get_conn_param = bnx2i_conn_get_param,
+ .get_session_param = iscsi_session_get_param,
+ .get_host_param = bnx2i_host_get_param,
+ .start_conn = bnx2i_conn_start,
+ .stop_conn = iscsi_conn_stop,
+ .send_pdu = iscsi_conn_send_pdu,
+ .xmit_task = bnx2i_task_xmit,
+ .get_stats = bnx2i_conn_get_stats,
+ /* TCP connect - disconnect - option-2 interface calls */
+ .ep_connect = bnx2i_ep_connect,
+ .ep_poll = bnx2i_ep_poll,
+ .ep_disconnect = bnx2i_ep_disconnect,
+ .set_path = bnx2i_nl_set_path,
+ /* Error recovery timeout call */
+ .session_recovery_timedout = iscsi_session_recovery_timedout,
+ .cleanup_task = bnx2i_cleanup_task,
+};
diff --git a/drivers/scsi/bnx2i/bnx2i_sysfs.c b/drivers/scsi/bnx2i/bnx2i_sysfs.c
new file mode 100644
index 0000000..96426b7
--- /dev/null
+++ b/drivers/scsi/bnx2i/bnx2i_sysfs.c
@@ -0,0 +1,142 @@
+/* bnx2i_sysfs.c: Broadcom NetXtreme II iSCSI driver.
+ *
+ * Copyright (c) 2004 - 2009 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ *
+ * Written by: Anil Veerabhadrappa (anilgv@broadcom.com)
+ */
+
+#include "bnx2i.h"
+
+/**
+ * bnx2i_dev_to_hba - maps dev pointer to adapter struct
+ * @dev: device pointer
+ *
+ * Map device to hba structure
+ */
+static inline struct bnx2i_hba *bnx2i_dev_to_hba(struct device *dev)
+{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ return iscsi_host_priv(shost);
+}
+
+
+/**
+ * bnx2i_show_sq_info - return(s currently configured send queue (SQ) size
+ * @dev: device pointer
+ * @buf: buffer to return current SQ size parameter
+ *
+ * Returns current SQ size parameter, this paramater determines the number
+ * outstanding iSCSI commands supported on a connection
+ */
+static ssize_t bnx2i_show_sq_info(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct bnx2i_hba *hba = bnx2i_dev_to_hba(dev);
+
+ return sprintf(buf, "0x%x\n", hba->max_sqes);
+}
+
+
+/**
+ * bnx2i_set_sq_info - update send queue (SQ) size parameter
+ * @dev: device pointer
+ * @buf: buffer to return current SQ size parameter
+ * @count: parameter buffer size
+ *
+ * Interface for user to change shared queue size allocated for each conn
+ * Must be within SQ limits and a power of 2. For the latter this is needed
+ * because of how libiscsi preallocates tasks.
+ */
+static ssize_t bnx2i_set_sq_info(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct bnx2i_hba *hba = bnx2i_dev_to_hba(dev);
+ u32 val;
+ int max_sq_size;
+
+ if (hba->ofld_conns_active)
+ goto skip_config;
+
+ if (test_bit(BNX2I_NX2_DEV_57710, &hba->cnic_dev_type))
+ max_sq_size = BNX2I_5770X_SQ_WQES_MAX;
+ else
+ max_sq_size = BNX2I_570X_SQ_WQES_MAX;
+
+ if (sscanf(buf, " 0x%x ", &val) > 0) {
+ if ((val >= BNX2I_SQ_WQES_MIN) && (val <= max_sq_size) &&
+ (is_power_of_2(val)))
+ hba->max_sqes = val;
+ }
+
+ return count;
+
+skip_config:
+ printk(KERN_ERR "bnx2i: device busy, cannot change SQ size\n");
+ return 0;
+}
+
+
+/**
+ * bnx2i_show_ccell_info - returns command cell (HQ) size
+ * @dev: device pointer
+ * @buf: buffer to return current SQ size parameter
+ *
+ * returns per-connection TCP history queue size parameter
+ */
+static ssize_t bnx2i_show_ccell_info(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct bnx2i_hba *hba = bnx2i_dev_to_hba(dev);
+
+ return sprintf(buf, "0x%x\n", hba->num_ccell);
+}
+
+
+/**
+ * bnx2i_get_link_state - set command cell (HQ) size
+ * @dev: device pointer
+ * @buf: buffer to return current SQ size parameter
+ * @count: parameter buffer size
+ *
+ * updates per-connection TCP history queue size parameter
+ */
+static ssize_t bnx2i_set_ccell_info(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ u32 val;
+ struct bnx2i_hba *hba = bnx2i_dev_to_hba(dev);
+
+ if (hba->ofld_conns_active)
+ goto skip_config;
+
+ if (sscanf(buf, " 0x%x ", &val) > 0) {
+ if ((val >= BNX2I_CCELLS_MIN) &&
+ (val <= BNX2I_CCELLS_MAX)) {
+ hba->num_ccell = val;
+ }
+ }
+
+ return count;
+
+skip_config:
+ printk(KERN_ERR "bnx2i: device busy, cannot change CCELL size\n");
+ return 0;
+}
+
+
+static DEVICE_ATTR(sq_size, S_IRUGO | S_IWUSR,
+ bnx2i_show_sq_info, bnx2i_set_sq_info);
+static DEVICE_ATTR(num_ccell, S_IRUGO | S_IWUSR,
+ bnx2i_show_ccell_info, bnx2i_set_ccell_info);
+
+struct device_attribute *bnx2i_dev_attributes[] = {
+ &dev_attr_sq_size,
+ &dev_attr_num_ccell,
+ NULL
+};