drm/panel: simple: Add timings for the Olimex LCD-OLinuXino-4.3TS
Add support for the Olimex LCD-OLinuXino-4.3TS panel to the DRM simple
panel driver.
It is a 480x272 panel connected through a 24-bits RGB interface.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index 5aa0734..847abee 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -1087,6 +1087,29 @@
.bus_format = MEDIA_BUS_FMT_RGB666_1X18,
};
+static const struct drm_display_mode olimex_lcd_olinuxino_43ts_mode = {
+ .clock = 9000,
+ .hdisplay = 480,
+ .hsync_start = 480 + 5,
+ .hsync_end = 480 + 5 + 30,
+ .htotal = 480 + 5 + 30 + 10,
+ .vdisplay = 272,
+ .vsync_start = 272 + 8,
+ .vsync_end = 272 + 8 + 5,
+ .vtotal = 272 + 8 + 5 + 3,
+ .vrefresh = 60,
+};
+
+static const struct panel_desc olimex_lcd_olinuxino_43ts = {
+ .modes = &olimex_lcd_olinuxino_43ts_mode,
+ .num_modes = 1,
+ .size = {
+ .width = 105,
+ .height = 67,
+ },
+ .bus_format = MEDIA_BUS_FMT_RGB666_1X18,
+};
+
/*
* 800x480 CVT. The panel appears to be quite accepting, at least as far as
* pixel clocks, but this is the timing that was being used in the Adafruit
@@ -1366,6 +1389,9 @@
.compatible = "okaya,rs800480t-7x0gp",
.data = &okaya_rs800480t_7x0gp,
}, {
+ .compatible = "olimex,lcd-olinuxino-43-ts",
+ .data = &olimex_lcd_olinuxino_43ts,
+ }, {
.compatible = "ontat,yx700wv03",
.data = &ontat_yx700wv03,
}, {